Powered by Deep Web Technologies
Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

This task/contract modification is for applying funding from the American Recovery Reinvestment Act  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MODEL CONTRACT MODIFICATION MODEL CONTRACT MODIFICATION AMERICAN RECOVERY AND REINVESTMENT ACT Developed by the Office of Environmental Management Purpose of Model The purpose of this model is to expedite the contracting process by helping assure a consistent application of the contract terms for the various modifications to EM contracts for incorporation of the Recovery Act work and associated requirements. This applies to work within the general scope existing contracts where Recovery Act funds are to be used. It is recognized that the work scope and other terms of individual contracts will affect the actual language that is used in each modification. However, this model sets forth principles that are necessary for all modifications for EM FAR-based (non-M&O) contracts as well as M&O

2

Evaluation of Technology Modifications Required to Apply Clean Coal Technologies in Russian Utilities Dec 1995 (4071k)  

NLE Websites -- All DOE Office Websites (Extended Search)

DOEiMC/3 1392-5600 DOEiMC/3 1392-5600 (DE97002247) Evaluation of Technology Modifications Required to Apply Clean Coal Technologies in Russian Utilities Final Report December 1995 Work Performed Under Contract No.: DE-FG21 -94MC3 1392 For U.S. Department of Energy Office of Fossil Energy Morgantown Energy Technology Center P.0, Box 880 Morgantown, West Virginia 26507-0880 By All-Russian Thermal Engineering Institute 14/23 Avtozavodskaya ST Moscow 109280, Russia Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor arry of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or rrse-

3

WEATHER MODIFICATION  

SciTech Connect

It is suggested that applying heat directly to a rain cloud, or to a ndoist air mass with rain potential, may alter the natural precipitation in a given geographical region. The immediate effect of the heat is to increase the buoyancy of the cloud or air parcel. The result, which depends on a number of interrelated factors may be either to cause precipitation where it would not naturally occur, or to suppress precipitation where it would naturally occur. Several possible applications are suggested. Since the heat supplied is supplemented by the latent heat resulting from condensation in the moist air mass, the results may more than justify the cost. However, substantial amounts of heat are involved. The heat can be supplied from fossil fuels, nuclear reactions, or a combination of both; but the logistics favor the use of large nuclear reactors wherever safety criteria can be met. Not only the efficiency and economics of the process, but also its feasibility, can be finally decided only on the basis of information that is not now available. (auth)

Rodin, M.B.; Hess, D.C.

1961-12-01T23:59:59.000Z

4

Nanoscale Surface Modifications I  

Science Conference Proceedings (OSTI)

... with a microwave plasma chemical vapor deposition technique utilizing methane/hydrogen/nitrogen chemistry. The surface modifications are characterized by ...

5

AMWTP Contract Modifications  

NLE Websites -- All DOE Office Websites (Extended Search)

ADVANCED MIXED WASTE TREATMENT PROJECT (AMWTP) Idaho Treatment Group, LLC (ITG) Modifications to Contract No. DE-EM0001467 You are here: DOE-ID Home > Contracts, Financial...

6

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science Applied Science Correlation of predicted and measured iron oxidation states in mixed iron oxides H. D. Rosenfeld and W. L. Holstein Development of a quantitative measurement of a diesel spray core using synchrotron x-rays C.F. Powell, Y. Yue, S. Gupta, A. McPherson, R. Poola, and J. Wang Localized phase transformations by x-ray-induced heating R.A. Rosenberg, Q. Ma, W. Farrell, E.D. Crozier, G.J. Soerensen, R.A. Gordon, and D.-T. Jiang Resonant x-ray scattering at the Se edge in ferroelectric liquid crystal materials L. Matkin, H. Gleeson, R. Pindak, P. Mach, C. Huang, G. Srajer, and J. Pollmann Synchrotron-radiation-induced anisotropic wet etching of GaAs Q. Ma, D.C. Mancini, and R.A. Rosenberg Synchrotron-radiation-induced, selective-area deposition of gold on

7

Weather Modification: Finding Common Ground  

Science Conference Proceedings (OSTI)

Research and operational approaches to weather modification expressed in the National Research Council's 2003 report on “Critical Issues in Weather Modification Research” and in the Weather Modification Association's response to that report form ...

Michael Garstang; Roelof Bruintjes; Robert Serafin; Harold Orville; Bruce Boe; William Cotton; Joseph Warburton

2005-05-01T23:59:59.000Z

8

INL Contract Modifications  

NLE Websites -- All DOE Office Websites (Extended Search)

Modifications to Contract No. DE-AC07-05ID14517 Modifications to Contract No. DE-AC07-05ID14517 You are here: DOE-ID Home > Contracts, Financial Assistance & Solicitations > INL Contract > INL Basic Modifications Blue Line Free Acrobat Reader Link The documents listed below represent an electronic copy of modifications to the contract for the Management and Operation of the INL awarded to Battelle Energy Alliance, LLC. These documents are in PDF format. The Adobe Reader is required to access them. If you do not currently have the Acrobat Reader, you may download the Reader FREE by clicking on the icon at left. Blue Line Pending NUMBER DATE SIGNED DESCRIPTION File Size (in KB) 283 September 30, 2013 Funding 105 282 September 30, 2013 Funding 104 281 September 27, 2013 Funding 104

9

Surface modification to prevent oxide scale spallation  

SciTech Connect

A surface modification to prevent oxide scale spallation is disclosed. The surface modification includes a ferritic stainless steel substrate having a modified surface. A cross-section of the modified surface exhibits a periodic morphology. The periodic morphology does not exceed a critical buckling length, which is equivalent to the length of a wave attribute observed in the cross section periodic morphology. The modified surface can be created using at least one of the following processes: shot peening, surface blasting and surface grinding. A coating can be applied to the modified surface.

Stephens, Elizabeth V; Sun, Xin; Liu, Wenning; Stevenson, Jeffry W; Surdoval, Wayne; Khaleel, Mohammad A

2013-07-16T23:59:59.000Z

10

Firearms Modification List  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FIREARMS MODIFICATION LIST FIREARMS MODIFICATION LIST U.S. DEPARTMENT OF ENERGY Office of Health, Safety and Security AVAILABLE ONLINE AT: INITIATED BY: http://www.hss.energy.gov Office of Health, Safety and Security Notices This document is intended for the exclusive use of elements of the Department of Energy (DOE), to include the National Nuclear Security Administration, their contractors, and other government agencies/individuals authorized to use DOE facilities. DOE disclaims any and all liability for personal injury or property damage due to use of this document in any context by any organization, group, or individual, other than during official government activities. Local DOE management is responsible for the proper execution of firearms-related programs for

11

Towards a Synergy-based Approach to Measuring Information Modification  

E-Print Network (OSTI)

Distributed computation in artificial life and complex systems is often described in terms of component operations on information: information storage, transfer and modification. Information modification remains poorly described however, with the popularly-understood examples of glider and particle collisions in cellular automata being only quantitatively identified to date using a heuristic (separable information) rather than a proper information-theoretic measure. We outline how a recently-introduced axiomatic framework for measuring information redundancy and synergy, called partial information decomposition, can be applied to a perspective of distributed computation in order to quantify component operations on information. Using this framework, we propose a new measure of information modification that captures the intuitive understanding of information modification events as those involving interactions between two or more information sources. We also consider how the local dynamics of information modific...

Lizier, Joseph T; Williams, Paul L

2013-01-01T23:59:59.000Z

12

CX-007060: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-007060: Categorical Exclusion Determination Tank 13 Well Water System Modification CX(s) Applied: B1.3 Date: 09022011 Location(s): Aiken,...

13

CX-006243: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-006243: Categorical Exclusion Determination Modification to Hayden Substation, Routt County, Colorado CX(s) Applied: B4.6 Date: 06142011 Location(s): Hayden,...

14

CX-003804: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Recovery Act: San Bernardino Associated Government Natural Gas Truck Project (Orange, California Infrastructure Modification) CX(s) Applied: B5.1 Date:...

15

Modification No. M074  

National Nuclear Security Administration (NNSA)

No. M074 No. M074 Page 2 of 2 BWXT Pantex, LLC Contract No. DE-AC-04AL:66620 1. Appendix D, "Key Personnel," dated October 13, 2003, that is currently in Section J of the Contract is hereby deleted in its entirety and replaced with Appendix D, "Key Personnel," dated August 23, 2004 (Attachment 1 of this Modification). 2. Section C of the Contract is modified to add paragraph 6.5, "Workers Compensation Matters ." This paragraph is stated below in its entirety. 6.5 Workers Compensation Matters The Contractor may, from time to time, be directed by the Contracting Officer to manage certain Workers Compensation Matters arising out of the operations of other plants within the Weapons Complex owned by the Department of Energy or its predecessor agencies and managed by the

16

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

NLE Websites -- All DOE Office Websites (Extended Search)

AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 15. PROJECT NO. (If app/icable) 331 See Block 16C 6. ISSUED BY CODE 00518 7. ADMINISTERED BY (If other than Item 6) CODE 100518 Oak Ridge Oak Ridge U.S. Department of Energy U.S. Department of Energy P.O. Box 2001 P.O. Box 2001 Oak Ridge TN 37831 Oak Ridge TN 37831 8. NAME AND ADDRESS OF CONTRACTOR (No .. slreet, county, State and ZIP Code) (x) 9A. AMENDMENT OF SOLICITATION NO. - OAK RIDGE ASSOCIATED UNIVERSITIES, INC. P.O. BOX 117 9B. DATED (SEE ITEM 11) o AK RIDGE TN 37830-6218 x 10A. MODIFICATION OF CONTRACT/ORDER NO. DE-AC05-060R23100 108. DATED (SEE ITEM 13) CODE 041152224 FACILITY CODE 12/21/2005 11. THIS ITEM ONLY APPLIES TO OF IIU .... O:' The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers -

17

Applied Quantum Information Science  

Science Conference Proceedings (OSTI)

Applied Quantum Information Science. Summary: Theory is being developed and used to devise methods for preserving ...

2012-05-30T23:59:59.000Z

18

Weather Modification A Theoretician's Viewpoint  

Science Conference Proceedings (OSTI)

Early progress in weather modification is attributed to a healthy interaction between theory and experiment. During the 1970s, a divergence of approaches took place. A “theoretical/experimental” approach, exemplified by the Cascade Project, ...

Kenneth C. Young

1996-11-01T23:59:59.000Z

19

Vermont Air Pollution Control Regulations, Major Stationary Sources and Major Modifications (Vermont)  

Energy.gov (U.S. Department of Energy (DOE))

This section of the air quality standards applies to all major sources and major modifications and outlines the required control technology to achieve the most stringent emission rate. Emission...

20

SOUTHVIEWDR Center for Applied  

E-Print Network (OSTI)

/Geology Chemistry Biological Sciences Geology Lab Bookstore Reed Milledge Payne Memorial Hall SANFORD DR Center CAES Activity Center Visitors Center (Four Towers) Greenhouses Center for Applied Isotope Study

Hall, Daniel

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

NLE Websites -- All DOE Office Websites (Extended Search)

1 of2 1 of2 AC PAGES 2. AMENDMENT/MODIFICATION NO. 13. EFFECTIVE DATE 4. REQUISITION/PURCHASE , 5. PROJECT NO (If applicab/e) A193 See Block 16C REQ. NO. NOPR 6. ISSUED BY CODE 7. ADMINISTERED BY (If other than /tern 6) CODE U.S. Department of Energy National Nuclear Security Administration P.O. Box 2050 Oak Ridge, TN 37831 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) Babcock & Wilcox Technical Services Y-12, LLC P.O. Box 2009 MS 8014 Oak Ridge, TN 37831-8014 CODE FACILITY CODE 9A. AMENDMENT OF SOLICITATION NO. 9B. DATED (SEE ITEM 11) 10A. MODIFICATION OF CONTRACT/ORDER NO. DE-AC05-000R22800 10B. DATED (SEE ITEM 13) August 31,2000 11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS .. o The above numbered solicitation IS amended as set forth In Item 14. The hour and date specified for receipt of Offers 0

22

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

1. 1. CONTRACT 10 CODE PAGE 1 OF 2 PAGES 2. AMENDMENT/MODIFICATION NO. 13. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 15. PROJECT NO. (If applicable) M058 See Block 16 C 6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE U.S. Department of Energy National Nuclear Security Administration Manager, Los Alamos Site Office 3747 West Jemez Road, Building 1410, TA-3 Los Alamos, NM 87544 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) 9A. AMENDMENT OF SOLICITATION NO. Los Alamos National Security, LLC 4200 West Jemez Road 9B. DATED (SEE ITEM 11) Suite 400 Los Alamos, NM 87544 10A. MODIFICATION OF CONTRACT/ORDER NO. DE-AC52-06NA25396 CODE FACILITY CODE 10B. DATED (SEE ITEM 13) December 21, 2005 11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS o The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt

23

Applied Energy Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Energy Programs Applied Energy Programs Applied Energy Programs Los Alamos is using its world-class scientific capabilities to enhance national energy security by developing energy sources with limited environmental impact and by improving the efficiency and reliability of the energy infrastructure. CONTACT US Acting Program Director Melissa Fox (505) 663-5538 Email Applied Energy Program Office serves as the hub connecting the Laboratory's scientific and technical resources to DOE sponsors, DoD programs, and to industry. The Applied Energy Program Office manages Los Alamos National Laboratory programs funded by the Department of Energy's (DOE's) Offices of Energy Efficiency/Renewable Energy, Electricity Delivery and Energy Reliability, and Fossil Energy. With energy use increasing across the nation and the

24

ROLE OF FIBER MODIFICATION IN NATURAL FIBER COMPOSITE PROCESSING  

SciTech Connect

The prediction and characterization of the adhesion between fiber, surface treatment, and polymer is critical to the success of large-scale natural fiber based polymer composites in automotive semi-structural application. The two primary factors limiting the use of natural fiber in polymer composites are fiber moisture uptake and fiber degradation during high-temperature processing. In this study, we have developed several fiber surface modification techniques and analyzed the fiber-polymer adhesion of modified fibers to more clearly understand the critical parameters controlling moisture uptake, swelling, and fiber degradation due to interfacial structure. We will present a overview of surface modification techniques we have applied to date for hemp fiber sources, and illustrate a path to characterize surface modification effects on natural fiber adhesion in thermoplastic composites.

Fifield, Leonard S.; Denslow, Kayte M.; Gutowska, Anna; Simmons, Kevin L.; Holbery, Jim

2005-11-03T23:59:59.000Z

25

Essays in applied microeconomics  

E-Print Network (OSTI)

This dissertation consists of three chapters on topics in applied microeconomics. In the first chapter. I investigate whether voters are more likely to support additional spending on local public services when they perceive ...

Aron-Dine, Aviva

2012-01-01T23:59:59.000Z

26

Cradle modification for hydraulic ram  

DOE Green Energy (OSTI)

The analysis of the cradle hydraulic system considers stress, weld strength, and hydraulic forces required to lift and support the cradle/pump assembly. The stress and weld strength of the cradle modifications is evaluated to ensure that they meet the requirements of the American Institute for Steel Construction (AISC 1989). The hydraulic forces are evaluated to ensure that the hydraulic system is capable of rotating the cradle and pump assembly to the vertical position (between 70{degrees} and 90{degrees}).

Koons, B.M.

1995-03-02T23:59:59.000Z

27

WIPP Hazardous Waste Permit - Approved Modifications  

NLE Websites -- All DOE Office Websites (Extended Search)

August 3, 2011 Class 1 Permit Modification Notification - Revise Tables 4.1.1 and G-1 dated August 8, 2011 Class 2 Permit Modification Request TRUPACT-III dated January 10, 2011...

28

Chapter 43 - Contract Modifications | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chapter 43 - Contract Modifications 43.1 Contract Modification.pdf AcqGuide43.2 1 August 2013CLEAN.pdf 43.3Maintaining Alignment of Project Mgmt with Contract Mgmt.pdf...

29

Applied Science/Techniques  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science/Techniques Applied Science/Techniques Applied Science/Techniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class soft x-ray facility are developed at the ALS itself. The optical components in use at the ALS-mirrors and lenses optimized for x-ray wavelengths-require incredibly high-precision surfaces and patterns (often formed through extreme ultraviolet lithography at the ALS) and must undergo rigorous calibration and testing provided by beamlines and equipment from the ALS's Optical Metrology Lab and Berkeley Lab's Center for X-Ray Optics. New and/or continuously improved experimental techniques are also a crucial element of a thriving scientific facility. At the ALS, examples of such "technique" highlights include developments in lensless imaging, soft x-ray tomography, high-throughput protein analysis, and high-power coherent terahertz radiation.

30

Applied Mathematics | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Mathematics Applied Mathematics Our work in applied mathematics ranges from algorithm design, to development of software tools and technology, to advanced simulations in...

31

Applied Science/Techniques  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science/Techniques Print Applied Science/Techniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class soft x-ray facility are developed at the ALS itself. The optical components in use at the ALS-mirrors and lenses optimized for x-ray wavelengths-require incredibly high-precision surfaces and patterns (often formed through extreme ultraviolet lithography at the ALS) and must undergo rigorous calibration and testing provided by beamlines and equipment from the ALS's Optical Metrology Lab and Berkeley Lab's Center for X-Ray Optics. New and/or continuously improved experimental techniques are also a crucial element of a thriving scientific facility. At the ALS, examples of such "technique" highlights include developments in lensless imaging, soft x-ray tomography, high-throughput protein analysis, and high-power coherent terahertz radiation.

32

Ion Beam Modification of Materials  

SciTech Connect

This volume contains the proceedings of the 14th International Conference on Ion Beam Modification of Materials, IBMM 2004, and is published by Elsevier-Science Publishers as a special issue of Nuclear Instruments and Methods B. The conference series is the major international forum to present and discuss recent research results and future directions in the field of ion beam modification, synthesis and characterization of materials. The first conference in the series was held in Budapest, Hungary, 1978, and subsequent conferences were held every two years at locations around the Globe, most recently in Japan, Brazil, and the Netherlands. The series brings together physicists, materials scientists, and ion beam specialists from all over the world. The official conference language is English. IBMM 2004 was held on September 5-10, 2004. The focus was on materials science involving both basic ion-solid interaction processes and property changes occurring either during or subsequent to ion bombardment and ion beam processing in relation to materials and device applications. Areas of research included Nanostructures, Multiscale Modeling, Patterning of Surfaces, Focused Ion Beams, Defects in Semiconductors, Insulators and Metals, Cluster Beams, Radiation Effects in Materials, Photonic Devices, Ion Implantation, Ion Beams in Biology and Medicine including New Materials, Imaging, and Treatment.

Averback, B; de la Rubia, T D; Felter, T E; Hamza, A V; Rehn, L E

2005-10-10T23:59:59.000Z

33

AME:NDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

AME:NDMENT OF SOLICITATION/MODIFICATION OF CONTRACT AME:NDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT 10 CODE PAGE 1 OF 224 PAGES 2. AMENDMENT/MODIFICATION NO. M202 3. EFFECTIVE DATE October 1, 2003 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable) 6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE U.s. Department of Energy N.itional Nuclear Security Administration Sandia Site Office Mail Stop 0184 P.O. Box 5400 AlbuauerQue, NM 87185-5400 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) 9A. AMENDMENT OF SOLICITATION NO. Sandia Corporation P. O. Box 5800 Albuquerque, NM 87185 98. DATED (SEE ITEM 11) 10A. MODIFICATION OF CONTRACT/ORDER NO. DE-ACO4-94AL85000 108. DATED (SEE ITEM 13) October 1, 1993 CODE II-ACIL~ CODE 11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

34

Applied antineutrino physics workshop.  

Science Conference Proceedings (OSTI)

This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river.

Lund, James C.

2008-01-01T23:59:59.000Z

35

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

NLE Websites -- All DOE Office Websites (Extended Search)

3. EFFECTIVE DATE 3. EFFECTIVE DATE 225 See Block 16C 6. ISSUED BY CODE 00518 Oak Ridge U.S. Department of Energy P.O. Box 2001 Oak Ridge TN 37831 8. NAME AND ADDRESS OF CONTRACTOR (No .* street. county. State and ZIP Code) OAK RIDGE ASSOCIATED UNIVERSITIES, INC. P.O. BOX 117 OAK RIDGE TN 37830-6218 11. CONTRACT 10 CODE 4. REOUISITIONJPURCHASE REO. NO. 10SC009292 Item 07 7. ADMINISTERED BY (If other than Item 6) Oak Ridge U.S. Department of Energy P.O. Box 2001 Oak Ridge TN 37831 (x) 9A. AMENDMENT OF SOLICITATION NO. r- 98. DATED (SEE ITEM 11) I PAGE OF PAGES 1 I 1 15. PROJECT NO. (If applicable) CODE 100518 X 10A. MODIFICATION OF CONTRACT/ORDER NO. DE-AC05-060R23100 CODE 041152224 FACILITY CODE 108. DATED (SEE ITEM 13) 12/21/2005 11. THIS ITEM ONLY APPLIES TO AMEI DMENTS OF SOLICITATIONS

36

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

NLE Websites -- All DOE Office Websites (Extended Search)

15. PROJECT NO. (If applicable) 15. PROJECT NO. (If applicable) 213 See B':'ock 16C 10SC008480 6. ISSUED BY CODE 00518 7. ADMINISTERED BY (If other than lIem 6) CODE 100518 Oak Ridge Oak Ridge U.S. Department of Energy U.S. Department of Energy P.O. Box 2001 p.e. Box 2001 Oak Ridge TN 37831 Oak Ridge TN 37831 8. NAME AND ADDRESS OF CONTRACTOR (No .. street. county. State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NO. r-- o AK RIDGE ASSOCIATED UNIVERSITIES, INC. P.O. BOX 117 99. DATED (SEE ITEM 11) o AK RIDGE TN 37830-6218 X 10A. MODIFICATION OF CONTRACT/ORDER NO. DE-AC05-060R23100 10B. DATED (SEE ITEM 13) CODE 041152224 FACILITY CODE 12/21/2005 11. THIS ITEM ONLY APPLIES TO ' ... OF SOLICITATIONS The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

37

Surface Modification for Enhanced Corrosion Resistance Using ...  

Science Conference Proceedings (OSTI)

Presentation Title, Surface Modification for Enhanced Corrosion Resistance Using .... Microscopic Study on the Interface Reaction between Ti and Al-Zn Alloy  ...

38

Surface Modification of Austenitic Stainless Steels  

Science Conference Proceedings (OSTI)

Feb 1, 2002 ... EPRI has supported development of a surface modification technique, the Stabilized Chromium Process (SCrP), that is more effective than ...

39

Evaluation of technology modifications required to apply clean coal technologies in Russian utilities. Final report  

SciTech Connect

The report describes the following: overview of the Russian power industry; electric power equipment of Russia; power industry development forecast for Russia; clean coal technology demonstration program of the US Department of Energy; reduction of coal TPS (thermal power station) environmental impacts in Russia; and base options of advanced coal thermal power plants. Terms of the application of clean coal technology at Russian TPS are discussed in the Conclusions.

NONE

1995-12-01T23:59:59.000Z

40

Perceptual thresholds for detecting modifications applied to the acoustical properties of a violin  

Science Conference Proceedings (OSTI)

This study is the first step in the psychoacoustic exploration of perceptual differences between the sounds of different violins. A method was used which enabled the same performance to be replayed on different “virtual violins

Claudia Fritz; Ian Cross; Brian C. J. Moore; Jim Woodhouse

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Reducing Unauthorized Modification of Digital Objects  

E-Print Network (OSTI)

-locking at the application package level (as is done in Android [11] ­ see §5.1), provides protection of such configuration Abstract--We consider the problem of malicious modification of digital objects. We present a protection mechanism designed to protect against unauthorized replacement or modification of digital objects while

Van Oorschot, Paul

42

Mass modification experiment definition study  

SciTech Connect

This report summarizes an attempt to find an experiment that would test the Haisch, Rueda, and Puthoff (HRP) conjecture that the mass and inertia of a body are induced effects brought about by changes in the quantum-fluctuation energy of the vacuum. It was not possible, however, to identify a definitive experiment. But, it was possible to identify an experiment that might be able to prove or disprove that the inertial mass of a body can be altered by making changes in the vacuum surrounding the body. Other experiments, which do not involve mass modification, but which teach something about the vacuum, were also defined and included in a ranked list of experiments. This report also contains an annotated bibliography. An interesting point raised by this paper is this: We can estimate the `vacuum energy density` to be 10{sup 108} J/cc, and the vacuum mass density to be 10{sup 94} g/cc, much higher numbers than those associated with nuclear energy. Although the field of `electromagnetic fluctuation energy of the vacuum` is admittedly an esoteric, little-understood field, it does seem to have definite potential as an energy source. 47 refs.

Forward, R.L. [Forward Unlimited, Malibu, CA (United States)

1996-12-31T23:59:59.000Z

43

Applied and Computational Mathematics Division  

Science Conference Proceedings (OSTI)

Applied and Computational Mathematics Division. Topic Areas. Mathematics; Scientific Computing; Visualization; Quantum Computing. ...

2013-05-09T23:59:59.000Z

44

Applied Optoelectronics | Open Energy Information  

Open Energy Info (EERE)

optical semiconductor devices, packaged optical components, optical subsystems, laser transmitters, and fiber optic transceivers. References Applied Optoelectronics1...

45

The Rationael for Future Weather Modification Research  

Science Conference Proceedings (OSTI)

A new national effort dealing with planned and inadvertent weather modification has been recommended. The contention is that this readiness stems from finally learning important facts about how to properly design and conduct difficult ...

Stanley A. Changnon

1980-06-01T23:59:59.000Z

46

Firearms Modifications List- June 13, 2012  

Energy.gov (U.S. Department of Energy (DOE))

This document contains the currently-approved protective force "Firearms Modification List" referred to in Department of Energy Order 473.3, Protection Program Operations. This supersedes any previous versions of this document

47

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

Department o f Energy NNSAPantex Site Office P.O. Box 30030 Amari110 TX 79120-0030 (xl r- 9A. AMENDMENT OF SOLICITATION NO. 98. DATED (SEE ITEM 11) 10A. MODIFICATION OF...

48

A Modification of the Atmospheric Energy Cycle  

Science Conference Proceedings (OSTI)

A modification is made of the conventional energy cycle by combining the eddy flux convergence and the mean meridional circulation terms in the mean momentum and heat equations. The combined terms are interpreted as the effective flux ...

Yoshikazu Hayashi

1987-08-01T23:59:59.000Z

49

ENVIRONMENTAL ASSESSMENT FOR WASTE WATER TREATMENT MODIFICATIONS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WASTE WATER TREATMENT MODIFICATIONS WASTE WATER TREATMENT MODIFICATIONS FOR IMPROVED EFFLUENT COMPLIANCE BROOKHAVEN NATIONAL LABORATORY UPTON, NEW YORK BROOKHAVEN SITE OFFICE JUNE 24, 2011 DOE/EA-1854 i Table of Contents 1.0 INTRODUCTION ............................................................................................................... 1 2.0 SUMMARY ........................................................................................................................ 1 3.0 PURPOSE AND NEED ....................................................................................................17 4.0 ALTERNATIVES ..............................................................................................................17 4.1 Alternative 1 - Groundwater Recharge System (Preferred Alternative) .............. 17

50

DOE Awards Task Order Modification for Support Services to Office...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Modification for Support Services to Office of Environmental Management DOE Awards Task Order Modification for Support Services to Office of Environmental Management March 11, 2013...

51

Focus Area 1 - Biomass Formation and Modification : BioEnergy...  

NLE Websites -- All DOE Office Websites (Extended Search)

Formation and Modification BESC biomass formation and modification research involves working directly with two potential bioenergy crops (switchgrass and Populus) to develop...

52

EIS-0435: Modification of the Groton Generation Station Interconnectio...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Modification of the Groton Generation Station Interconnection Agreement, Brown County, South Dakota EIS-0435: Modification of the Groton Generation Station Interconnection...

53

NFRC Procedures for Applied Films  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Films Applied Films Last update: 12/10/2013 07:29 PM NFRC now has a procedure for adding applied films to substrates in Optics5 and importing those applied film constructions into WINDOW5 to be used in a whole product calculation. The information presented below is provided to help simulators with this process. Feel free to contact us at WINDOWHelp@lbl.gov with questions or comments. NFRC Applied Film Procedure Applied Film Procedures (approved by NFRC) (PDF file) Approved Applied Film List (IGDB 33.0) (PDF file) NFRC Laminate Procedure Training Powerpoint with Examples (This Powerpoint presentation was used in the NFRC web based training sessions in December 2006 and January 2007) PowerPoint Presentation (PPT file) PowerPoint Presentation (PDF file) Help and Troubleshooting

54

CX-009104: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Infrastructure Modification for the Mobile Plutonium Facility (MPF) at the 645-N Complex CX(s) Applied: B1.15 Date: 08/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office

55

CX-010632: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-010632: Categorical Exclusion Determination I-75 Green Corridor Project - E85 Station Modification to Include Retail E85 Fuel Dispenser CX(s) Applied: A1, B5.22...

56

CX-010633: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-010633: Categorical Exclusion Determination I-75 Green Corridor Project - E85 Station Modification to Include Retail E85 Fuel Dispenser CX(s) Applied: A1, B5.22...

57

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-010632: Categorical Exclusion Determination I-75 Green Corridor Project - E85 Station Modification to Include Retail E85 Fuel Dispenser CX(s) Applied: A1, B5.22...

58

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination Design and Install a Modification to the HB-Line Exhaust Fan Dampers CX(s) Applied: B2.5 Date: 10132011 Location(s): Aiken, South Carolina...

59

Prospect of Rapidity Asymmetry and Nuclear Modifications  

E-Print Network (OSTI)

In asymmetric heavy ion collisions like dA or pA, particle production yields are different in the forward (d- or p-side) and backward (A-side) rapidity directions. The rapidity distribution reflects the geometry and phase-space distribution of nuclear matter. These properties may depend on the time evolution of the collision. Due to the smallness of the backward-forward differences, the rapidity asymmetry factor can be useful to quantify nuclear modification effects, like e.g. shadowing and the EMC effect. Our work is a survey of the nuclear modification factor and the rapidity asymmetries at RHIC energies. We analyze the rapidity dependence and the strength of the nuclear effects. We focus on the high transverse momentum region, and make predictions for the role of nuclear modifications and rapidity asymmetries for future experimental measurements at increasing absolute values of rapidity.

G. G. Barnaföldi; A. Adeluyi; G. Fai; P. Lévai; G. Papp

2008-07-22T23:59:59.000Z

60

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT I~' CONTRACT  

National Nuclear Security Administration (NNSA)

I~' I~' CONTRACT ID CODE IPAGE OF PAGES DE-NR0000031 . 1 I 1 2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. I 5. PROJECT NO. (If applicable) 003 Same as Block 16G . N~ 6. ISSUED BV CODE 7. ADMINISTERED BV (If other than Item 6) Code I U.S. Department of Energy Pittsburgh Naval Reactors Office P.O. Box 109 West Mifflin, PA 15122-0109 8. NAME AND ADDRESS OF CONTRACTOR (No. street, county, State and ZIP Code) (*...) 9.A. AMENDMENT OF SOLICITATION NO. Bechtel Marine Propulsion Corporation 9.6. DATED (SEE ITEM 11) 50 Beale Street San Francisco, CA 94105-1895 lOA MODIFICATION OF Contract/Order NO. *... DE-NROOOOO31 10.B. DATED (SEE ITEM 13) CODE N/A I FACILlTV CODE N/A Seotember 18, 2008 11. THIS ITEM ONLV APPLIES TO AMENDMENTS OF SOLICITATIONS D The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers Dis

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Locally exact modifications of discrete gradient schemes  

E-Print Network (OSTI)

Locally exact integrators preserve linearization of the original system at every point. We construct energy-preserving locally exact discrete gradient schemes for arbitrary multidimensional canonical Hamiltonian systems by modifying classical discrete gradient schemes. Modifications of this kind are found for any discrete gradient.

Cie?li?ski, Jan L

2013-01-01T23:59:59.000Z

62

Laser light absorption with density profile modifications  

SciTech Connect

Two-dimensional computer simulations studied plasma heating by electron plasma waves. The results emphasize the importance of nonlinear steepening of the density profile near the critical density. A typical simulation result is presented in order to illustrate these profile modifications. It is shown that large dc magnetic field generation is an inherent property of the absorption of obliquely-incident light. (MOW)

Kruer, W.; Valeo, E.; Estabrook, K.; Langdon, B.; Lasinski, B.

1974-12-01T23:59:59.000Z

63

Microsoft Word - Naselle Tap Modification Loop to Driscoll Sub CX.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2010 7, 2010 REPLY TO ATTN OF: KEC-4 SUBJECT: Environmental Clearance Memorandum Amy Freel Project Manager - TEP-CSB-2 Proposed Action: Naselle Tap Modification Loop into Driscoll Substation Budget Information: Work order 231878 task 03 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.11 Construction or modification of electric power substations. B4.6 Additions/modifications to electric power transmission facilities within previously developed area. Location: Clatsop County, Oregon Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to expand the existing Driscoll Substation to accommodate a 115-kV ring bus and rebuild 2 ½ miles of the Allston-Astoria No. 1 line to

64

High energy modifications of blackbody radiation and dimensional reduction  

E-Print Network (OSTI)

Quantization prescriptions that realize generalized uncertainty relations (GUP) are motivated by quantum gravity arguments that incorporate a fundamental length scale. We apply two such methods, polymer and deformed Heisenberg quantization, to scalar field theory in Fourier space. These alternative quantizations modify the oscillator spectrum for each mode, which in turn affects the blackbody distribution. We find that for a large class of modifications, the equation of state relating pressure $P$ and energy density $\\rho$ interpolates between $P=\\rho/3$ at low $T$ and $P=2\\rho/3$ at high $T$, where $T$ is the temperature. Furthermore, the Stefan-Boltzman law gets modified from $\\rho \\propto T^{4}$ to $\\rho \\propto T^{5/2}$ at high temperature. This suggests an effective reduction to 2.5 spacetime dimensions at high energy.

Viqar Husain; Sanjeev S. Seahra; Eric J. Webster

2013-05-13T23:59:59.000Z

65

High energy modifications of blackbody radiation and dimensional reduction  

E-Print Network (OSTI)

Quantization prescriptions that realize generalized uncertainty relations (GUP) are motivated by quantum gravity arguments that incorporate a fundamental length scale. We apply two such methods, polymer and deformed Heisenberg quantization, to scalar field theory in Fourier space. These alternative quantizations modify the oscillator spectrum for each mode, which in turn affects the blackbody distribution. We find that for a large class of modifications, the equation of state relating pressure $P$ and energy density $\\rho$ interpolates between $P=\\rho/3$ at low $T$ and $P=2\\rho/3$ at high $T$, where $T$ is the temperature. Furthermore, the Stefan-Boltzman law gets modified from $\\rho \\propto T^{4}$ to $\\rho \\propto T^{5/2}$ at high temperature. This suggests an effective reduction to 2.5 spacetime dimensions at high energy.

Husain, Viqar; Webster, Eric J

2013-01-01T23:59:59.000Z

66

BNL | Accelerators for Applied Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Accelerators for Applied Research Accelerators for Applied Research Brookhaven National Lab operates several accelerator facilities dedicated to applied research. These facilities directly address questions and concerns on a tremendous range of fields, including medical imaging, cancer therapy, computation, and space exploration. Leading scientists lend their expertise to these accelerators and offer crucial assistant to collaborating researchers, pushing the limits of science and technology. Interested in gaining access to these facilities for research? See the contact number listed for each facility. RHIC tunnel Brookhaven Linac Isotope Producer The Brookhaven Linac Isoptope Producer (BLIP)-positioned at the forefront of research into radioisotopes used in cancer treatment and diagnosis-produces commercially unavailable radioisotopes for use by the

67

CRC handbook of applied thermodynamics  

Science Conference Proceedings (OSTI)

The emphasis of this book is on applied thermodynamics, featuring the stage of development of a process rather than the logical development of thermodynamic principles. It is organized according to the types of problems encountered in industry, such as probing research, process assessment, and process development. The applied principles presented can be used in most areas of industry including oil and gas production and processing, chemical processing, power generation, polymer production, food processing, synthetic fuels production, specialty chemicals and pharmaceuticals production, bioengineered processes, etc.

Palmer, D.A. (Amoco Chemical Corp., Naperville, IL (USA). Research and Development Dept.)

1987-01-01T23:59:59.000Z

68

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

CONTRACT ID CODE j PAGE OF PAGES 1 I 2 2 AMENDMENT/MODIFICATION NO 3. EFFECTIVE DATE 4 REQUISITION/PURCHASE REO NO. 15. PROJECT NO. (II applicable) 220 See Block 16C 6 ISSUED BY CODE 05003 7 ADMINISTERED BY (lfolherthan Item 6) CODE 105003 NNSA/Los Alamos Sile Office NNSA/Los Alamos Site Office u.s. Department of Energy u.s. Department of Energy Los Alamos Site Office Los Alamos Site Office 3747 West Jemez Road 3747 West Jemez Road Los Alamos Los Alamos NM 87544 NM 87544 8. NAME AND ADDRESS OF CONTRACTOR (No .. street. county State and ZIP Code) ~ 9A. AMENDMENT OF SOLICITATION NO. LOS ALAMOS NATIONAL SECURITY, LLC A ttn: STEVE K. SHOOK 98 DATED (SEE ITEM 11) P.O. BOX 1663' MS P222 L OS ALAMOS Nt1 875450001 10A. MODIFICATION OF CONTRACT/ORDER NO

69

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

9 9 11. CONTRACT 10 CODE 1PAGE OF PAGES AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 I 25 2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ . NO . 5 PROJECT NO. (If applicab/e) See Bl ock 1 6C 1 6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE 105007 NNSA / Pantex Site Office 05007 NNSA/Pantex Site Office U.S. Department of Energy U.S. Department of Energy Nt SA/ Pantex S it e Offi ce NNSA/Pantex Site Office P.O. Box 30030 P . O . Box 30030 Amarillo TX 79 1 20-0030 Amarillo TX 79 1 20 - 0030 8 NAME AND ADDRESS OF CONTRACTOR (No., streel, county, Siele end ZIP Code) 9A AMENDMENT OF SOLICITATION NO. (xl - BABCOCK & WILCOX TECHNICAL SERVICES PANTEX, L L C Attn : GARY ALLEN 9B . DATED (SEE /TEM 11) P,0 . BOX 30020

70

California Energy Commission Apply Today!  

E-Print Network (OSTI)

photovoltaic project in the future. Peak Demand Savings: 95 kW Energy Savings: 1,510,849 kWh Annual Energy CostCalifornia Energy Commission Apply Today! "The College implemented all of the recommended projects Programs Office (916) 654-4147 pubprog@energy.state.ca.us "CEC financing allowed us to install many

71

implementing bioenergy applied research & development  

E-Print Network (OSTI)

1 A Northern Centre for Renewable Energy implementing bioenergy applied research & development plant measures to become carbon neutral and operate on renewable energy. UNBC is uniquely positioned for Climate Solutions, and UNBC. The Green University Centre will be a model of energy efficiency

Northern British Columbia, University of

72

Review of Combustion Modification Emerging Technologies  

Science Conference Proceedings (OSTI)

Combustion modification emerging technologies for coal-fired boilers represent new developments in NOx control through changes in the fuel/air mixing of the combustion process. Technologies examined in this report fall into the categories of low-NOX burners (LNB), overfire air (OFA), enriched combustion, and combustion diagnostics. The technology reviews are comprised of the following sections where sufficient information was available: background, NOX reduction principle, performance and experience base...

2008-02-26T23:59:59.000Z

73

Comment re DOE's NOI re continuation or modification of Price...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Comment re DOE's NOI re continuation or modification of Price-Anderson Act Comment re DOE's NOI re continuation or modification of Price-Anderson Act Comments of Kerr-McGee...

74

DRAGON 3.06H Fission Rate Modifications With Tutorial  

E-Print Network (OSTI)

This is a modification to the reactor simulation code DRAGON 3.06H. The modification includes the modified files, a tutorial in PDF, and a sample input and output,

Jones, Christopher

2012-04-13T23:59:59.000Z

75

Boosted ARTMAP: Modifications to fuzzy ARTMAP motivated by boosting theory  

Science Conference Proceedings (OSTI)

In this paper, several modifications to the Fuzzy ARTMAP neural network architecture are proposed for conducting classification in complex, possibly noisy, environments. The goal of these modifications is to improve upon the generalization performance ...

Stephen J. Verzi; Gregory L. Heileman; Michael Georgiopoulos

2006-05-01T23:59:59.000Z

76

Vehicle Technologies Office: Applied Battery Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Battery Research to someone by E-mail Share Vehicle Technologies Office: Applied Battery Research on Facebook Tweet about Vehicle Technologies Office: Applied Battery...

77

Effect of Chemistry Modifications and Heat Treatments on the ...  

Science Conference Proceedings (OSTI)

EFFECT OF CHEMISTRY MODIFICATIONS AND HEAT TREATMENTS. ON THE MECHANICAL PROPERTIES OF DS MAR-M200 SUPERALLOY.

78

Modification of Rheological Properties of Nickel Laterite for Stirred ...  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2013. Symposium, Water and Energy in Mineral Processing. Presentation Title, Modification of ...

79

NRC requests another round of modifications  

Science Conference Proceedings (OSTI)

This article summarizes a number issues and events in the commercial nuclear power industry during this reporting period. Included are items on: (1) Issuance of NRC Bulletin 96-03 requesting modifications to BWR emergency core cooling systems, (2) Augmented inspection team to investigate a reactor trip/steam generator boil-off event at ANO-1, (3) Overall performance improvement at Dresden Station, (4) FSAR violations during refueling at a number of facilities in which the core is fully off-loaded, (5) Safety assessment at Maine Yankee, (6) Startup of Watts Bar-1, and (6) Cooling tower fire at Brown`s Ferry.

NONE

1996-07-01T23:59:59.000Z

80

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

AMENDMENT/MODIFICATION NO AMENDMENT/MODIFICATION NO . 3. EFFECTIVE DATE 0232 See Block 16C 6. ISSUED BY CODE 05003 NNSA/Los Al amos Si t e Office U. S . Dep a rtme nt of Ene r gy Los Alamo s Sit e Off i ce 3747 We st Jemez Road Los Al a mos NM 87544 8. NAME AND ADDRESS OF CONTRACTOR (No. , street, county, State and ZIP Code) L A OS ALAMOS NAT I ONAL SECURI TY, ttn : STEVE K. SHOOK P.O . BOX 1663 , M S P222 L OS ALAMOS NM 875450001 CODE 175252894 LLC FACILITY CODE 11 . CONTRACT ID CODE I PAGE OF PAGES 1 I 2 4. REQUISITION/PURCHASE REQ. NO. 15. PROJECT NO. (ff applicable) 7. ADMINISTERED BY (ff other than Item 6) CODE 1 05003 NNSA/ Los Alamos S i te Office U. S . Departme n t of Energy Los Alamos Site Off ice 3747 W est J e me z Ro a d Los Alamos NM 875 4 4 (x) 9A. AMENDMENT OF SOLICITATION NO. - 9B. DATED (SEE ITEM 11)

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

THREE ESSAYS ON APPLIED ECONOMICS  

E-Print Network (OSTI)

In this dissertation three essays were presented. In the first two essays we measure the consumer welfare changes caused by U.S. meat price changes. In the third essay the dynamic structure of international gasoline prices using the time series methodology is investigated. In chapter II, we investigate the U.S. consumer behavior on meat consumption depending on a linear expenditure system (LES), and then we simulate the welfare effects of a set of price changes on the U.S. meat consumption. The simulation results show that the amount of consumer welfare change for each meat is not same across the meats under the same percentage change of price. The simulation results also show that when all the prices are doubled the total amount of CV reaches almost the same amount of current total quarterly expenditures for the three meats. In chapter III, we apply the compensating variation (CV) approach for the measurement of consumer welfare losses associated with beef price changes. We applied the long-run cointegrating relationship in vector error correction model (VECM) to estimate the Marshallian demand function. Apparently, the use of long-run cointegration in VECM in deriving the direct Marshallian demand function to measure the consumer welfare change is the first attempt in the literature. This is one of the contributions of the study. The simulation results show that the amount of consumer welfare change for beef is compatible with the one derived from LES methodology. In chapter IV, an empirical framework to summarize the interdependence of four international gasoline markets (New York, U.S. Gulf Coast, Rotterdam and Singapore) is presented. For that purpose, we employ a structural VECM and directed acyclic graphs (DAGs). To solve the identification problem in structural VECM, we apply DAGs derived from contemporaneous VECM innovations. The impulse response functions show that the time period in which a shock in a market affects the other market is very short. Forecast error variance decompositions (FEVD) shows that in all markets, except the U.S. Gulf Coast market, current and past shocks in their own market explained the most of the volatility in their own market in the Short-run.

Shin, Sang-Cheol

2008-08-01T23:59:59.000Z

82

Applied Materials | Open Energy Information  

Open Energy Info (EERE)

Materials Materials Jump to: navigation, search Name Applied Materials Address 3050 Bowers Avenue Place Santa Clara, California Zip 95054 Sector Solar Stock Symbol AMAT Website http://www.appliedmaterials.co Coordinates 37.3775749°, -121.9794416° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.3775749,"lon":-121.9794416,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

83

EERE Postdoctoral Research Awards: How to Apply  

NLE Websites -- All DOE Office Websites (Extended Search)

How to Apply to someone by E-mail Share EERE Postdoctoral Research Awards: How to Apply on Facebook Tweet about EERE Postdoctoral Research Awards: How to Apply on Twitter Bookmark...

84

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

ON OF CONTRACTORD ER NO. X DE-AC5 4-00AL66620 10B. DATED (SEE ITEM 13) FACILITY CODE COD E 072820 00 015693703 11 . THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS o...

85

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

No. DE-AC04-94AL85000 No. DE-AC04-94AL85000 Modification No. M344 Page 2 of 19 1. Section B, Clause B-2, Contract Type and Value is amended as follows: a. Paragraph (b) is revised as follows to set forth the Estimated Cost for FY 2010 and to reflect the Total Estimated Cost, exclusive of Contractor's Fees: Contract Period Estimated Cost October 1, 2009 through September 30, 2010 $ 2,549,525,767 October 1, 2010 through $ To be negotiated annually September 30, 2012 TOTAL through FY10 $31,589,840,857 b. Paragraph (c) is revised as follows to set the Fixed Fee for FY 2010 and to reflect the total Fixed Fee under the contract: Contract Period Fixed Fee October 1, 2009 through September 30, 2010 $ 18,040,617 October 1, 2010 through $ To be negotiated annually

86

Modification of fluorescent luminaries for energy conservation  

SciTech Connect

Reducing energy consumption in existing buildings by reducing the number of lamps presents technical problems when more than one fluorescent lamp operates from a single ballast. A preliminary investigation was made whereby capacitors were substituted for one fluorescent lamp in a two-lamp luminaire which operated with a single ballast. Under optimum conditions, lighting efficiency (foot-candles per watt) was nearly as high at reduced power input as it was with two lamps operating normally. No failures in lighting equipment or capacitors occurred and no fire hazards, other safety hazards, or other unsatisfactory occurrences were observed. A more thorough investigation involving a number of parameters is needed to ascertain the feasibility of this modification.

Beausoliel, R.W.; Meese, W.J.; Yonemura, G.

1975-01-01T23:59:59.000Z

87

Modification of fluorescent luminaires for energy conservation  

SciTech Connect

Reducing energy consumption in existing buildings by reducing the number of lamps presents technical problems when more than one fluorescent lamp operates from a single ballast. A preliminary investigation was made whereby capacitors were substituted for one fluorescent lamp in a two-lamp luminaire which operated with a single ballast. Under optimum conditions, lighting efficiency (foot-candles per watt) was nearly as high at reduced power input as it was with two lamps operating normally. No failures in lighting equipment or capacitors occurred and no fire hazards, other safety hazards, or other unsatisfactory occurrences were observed. A more thorough investigation involving a number of parameters is needed to ascertain the feasibility of this modification. (auth)

Beausoliel, R.W.; Meese, W.J.; Yonemura, G.

1975-10-01T23:59:59.000Z

88

Weatherization and Intergovernmental Program: Apply for Weatherization  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply Apply for Weatherization Assistance to someone by E-mail Share Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Facebook Tweet about Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Twitter Bookmark Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Google Bookmark Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Delicious Rank Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Digg Find More places to share Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on AddThis.com... Plans, Implementation, & Results Weatherization Assistance Program Weatherization Services

89

Vehicle Technologies Office: Applied Battery Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Battery Research Applied battery research addresses the barriers facing the lithium-ion systems that are closest to meeting the technical energy and power requirements for...

90

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE  

National Nuclear Security Administration (NNSA)

l PAGE 1 OF 3PAGES 2. AMENDMENT/MODIFICATION NO. I 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. I 5. PROJECT NO. (If applicable) 180 See Block 16 C 6.1SSUEDBY CODE 7. ADMINISTERED BY (If other than Item 6) CODE U.S. Department of Energy National Nuclear Security Administration Manager, Los Alamos Site Office 3747 West Jemez Road Los Alamos, NM 87544 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) 9A. AMENDMENT OF SOLICITATION NO. Los Alamos National Security, LLC 4200 West Jemez Road 9B. DATED (SEE ITEM 11) Suite 400 10A. MODIFICATION OF Los Alamos, NM 87544 CONTRACT/ORDER NO. DE-AC52-06NA25396 CODE FACILITY CODE 10B. DATED (SEE ITEM 13) December 21, 2005 -~ - - 11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

91

Effects of Surface Modifications on Twinning Stress and the Stability ...  

Science Conference Proceedings (OSTI)

Surface damage was produced with spark erosion, ion implantation, shot blasting and abrasive wearing. The degree of surface modification was characterized ...

92

Surface Modification Agents for Lithium-Ion Batteries | Argonne...  

NLE Websites -- All DOE Office Websites (Extended Search)

Surface Modification Agents for Lithium-Ion Batteries Technology available for licensing: A process to modify the surface of the active material used in an electrochemical device...

93

Impact of Low-Dose Ionizing Irradiation on Histone Modification...  

NLE Websites -- All DOE Office Websites (Extended Search)

Impact of Low-Dose Ionizing Irradiation on Histone Modification and Chromatin Organization Hunter W. Richards Lawrence Berkeley National Laboratory Abstract Goal Our goal is to...

94

Impact of Low-Dose Ionizing Irradiation on Histone Modification...  

NLE Websites -- All DOE Office Websites (Extended Search)

Low-Dose Ionizing Irradiation on Histone Modification and Chromatin Organization Hunter W. Richards, Steven D. Ayers, Shutao Cai, Yoshinori Kohwi, Gary Karpen, Sylvain Costes and...

95

Chemical Modification of Turkish Natural Zeolite: Application as an ...  

Science Conference Proceedings (OSTI)

Modification of Turkish clinoptilolite mineral was carried out with HCl and trona for its potential application as an adsorbent. Natural clinoptilolite has small pore ...

96

Effects of Ultrasonic Nanocrystal Surface Modification on Fatigue ...  

Science Conference Proceedings (OSTI)

Presentation Title, Effects of Ultrasonic Nanocrystal Surface Modification on Fatigue Behavior of SUS316 Austenitic Stainless Steel Tube for Stents. Author(s)  ...

97

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT I I CONTRACT...  

NLE Websites -- All DOE Office Websites (Extended Search)

of this modification is to accomplish the following: 1) Delete Section J, Attachment D, DOE Directives (List B), Requirements Change Notice (RCN) ORAU-13 (16 pages) in its...

98

Surface modification of aramid fibers with novel chemical approach  

Science Conference Proceedings (OSTI)

propane was chosen as the treatment reagent to modify aramid fibers surface via. Graft reaction. After the modification, the interfacial properties of aramid/epoxy.

99

DARPA Learning Applied to Ground Robots (LAGR)  

Science Conference Proceedings (OSTI)

DARPA Learning Applied to Ground Robots (LAGR) Project (Concluded). Summary: The National Institute of Standards ...

2012-01-04T23:59:59.000Z

100

Modifications to the VV PHTS RELAP5 Model  

SciTech Connect

Modifications and improvements to a previous RELAP5 model of the Vacuum Vessel Primary Heat Transfer System are described in this report. The modifications were new pump models, a new steam pressurizer, new coolant water control systems, additional pipe structures, and reduction of the pulse power to 6 MW.

Carbajo, Juan J [ORNL

2011-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Alleged assassins: realist and constructivist semantics for modal modification  

Science Conference Proceedings (OSTI)

Modal modifiers such as Alleged oscillate between being subsective and being privative. If individual a is an alleged assassin (at some parameter of evaluation) then it is an open question whether a is an assassin (at that parameter). ... Keywords: alleged, allegedly, constructive type theory, modal modification, property vs. propositional modification, transparent intensional logic

Bjørn Jespersen; Giuseppe Primiero

2011-09-01T23:59:59.000Z

102

Nitrogen modification of highly porous carbon for improved supercapacitor performance  

E-Print Network (OSTI)

Nitrogen modification of highly porous carbon for improved supercapacitor performance Stephanie L for supercapacitor applications. Surface modification increases the amount of nitrogen by four times when compared elements in highly porous carbon used for electric double-layer supercapacitors.1 These elements modify

Cao, Guozhong

103

Contract Modification Awarded for Legal Support | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contract Modification Awarded for Legal Support Contract Modification Awarded for Legal Support Contract Modification Awarded for Legal Support September 30, 2013 - 12:00pm Addthis Media Contact Lynette Chafin 513-246-0461 lynette.chafin@emcbc.doe.gov Cincinnati - The Department of Energy today awarded a contract modification to A R Biddle & Associates, Inc. of Peachtree City, GA to add scope for the contractor to analyze contract claims that are appealed to the Civilian Board of Contract Appeals (CBCA). The contract was awarded on February 15, 2013 for expert assistance in evaluating contract claims up to and including participation in alternative dispute resolution (ADR) proceedings. The modification will also increase the not-to-exceed value of the contract from $563,744.00 to approximately $1.2 million and will extend

104

DOE to Hold Public Information Meetings on Requested Permit Modifications  

NLE Websites -- All DOE Office Websites (Extended Search)

Requested Permit Modifications Requested Permit Modifications CARLSBAD, N.M., March 15, 2001 -- The public is invited to comment on requested modifications to the Hazardous Waste Facility Permit for the Waste Isolation Pilot Plant (WIPP). Submittal of the proposed modification request to the New Mexico Environment Department (NMED) by the U.S. Department of Energy (DOE) begins a formal review process that includes a 60-day public comment period and public information meetings. In its submittal, DOE requests five permit changes to modify conditions at the facility. The proposed modifications conform to industry standards for the handling of hazardous materials and would continue to protect the safety of the facility, its employees, and the public. The first two requested changes would eliminate redundant and obsolete training

105

OT SPECIFIED I OTHER AMENDMENT OF SOLICITATI ON/MODIFICATION OF CONTRACT  

NLE Websites -- All DOE Office Websites (Extended Search)

OT SPECIFIED I OT SPECIFIED I OTHER AMENDMENT OF SOLICITATI ON/MODIFICATION OF CONTRACT 2 AM EN DMENT/MODIFIC ATION NO 1 B 6 ISSUED BY CODE Oak UrJge u . s . De arcment of Energ y P . O. Box 2001 Oak Ridge TN 37831 3 EFFccnv E DA E Sep Bl c..c.k _6C 00518 8 NAME AND ADDRESS OF CONTRACTOR INo ~/e.' CO Ull/y. Sial. and ZIP Cod.) OAK RIDGE A SOCIATED Ul IVERSITIES , P . O. BOX 117 OAK R-DGE Ttl 37830-6218 N . CODE 0411522 24 FAC ILITY CODE 1 CONTRACT 10 CODE 4 R OUISITIONIPU RCHASr. REO NO IuS lL 7 ADMIN ISTER ED BY rlf QlherlhBn lIem B) Oak Ridge o . s . Dep rtment of Energ y P . O. Box 2001 Oak Ridge TN 37831 (xl 9A AMENDMENT OF SOlICrTATlON NO. 98 DA TEO I SEE ITEM 11) .. 10A MODIFIC ATION OF CO NTRACTIORD ER NO A DE-AC05 - 060R 23 100 l OB DATED (SEE ITEM 13) 12/ 21/ 2005 11 . THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITA

106

Oxidation Kinetics Modeling Applying Phase Field Approach  

Science Conference Proceedings (OSTI)

Presentation Title, Oxidation Kinetics Modeling Applying Phase Field Approach ... chemical reaction rates will increase exponentially and environmental attack ...

107

Applied Chemicals and Materials Staff Directory  

Science Conference Proceedings (OSTI)

Applied Chemicals and Materials Staff Directory. ... accept either a name, organizational name, or ... MML Organization. Contact. Material Measurement ...

2012-10-12T23:59:59.000Z

108

Researcher, Los Alamos National Laboratory - Applied Physics...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Physics Division | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

109

CHEMICAL ENGINEERING SCHOOL OF ENGINEERING & APPLIED SCIENCE  

E-Print Network (OSTI)

30 CHEMICAL ENGINEERING SCHOOL OF ENGINEERING & APPLIED SCIENCE MIAMI UNIVERSITY 2005-2006 The program leads to the degree, Bachelor of Science in Applied Science, with a major in Chemical Engineering The chemical engineering students learn to apply the concepts of chemistry, biochemistry and biological science

Dollar, Anna

110

Metal ion implantation for large scale surface modification  

Science Conference Proceedings (OSTI)

Intense energetic beams of metal ions can be produced by using a metal vapor vacuum arc as the plasma discharge from which the ion beam is formed. We have developed a number of ion sources of this kind and have built a metal ion implantation facility which can produce repetitively pulsed ion beams with mean ion energy up to several hundred key, pulsed beam current of more than an ampere, and time averaged current of several tens of milliamperes delivered onto a downstream target. We've also done some preliminary work on scaling up this technology to very large size. For example, a 50-cm diameter (2000 cm[sup 2]) set of beam formation electrodes was used to produce a pulsed titanium beam with ion current over 7 amperes at a mean ion energy of 100 key. Separately, a dc embodiment has been used to produce a dc titanium ion beam with current over 600 mA, power supply limited in this work, and up to 6 amperes of dc plasma ion current was maintained for over an hour. In a related program we've developed a plasma immersion method for applying thin metallic and compound films in which the added species is atomically mixed to the substrate. By adding a gas flow to the process, well-bonded compound films can also be formed; metallic films and multilayers as well as oxides and nitrides with mixed transition zones some hundreds of angstroms thick have been synthesized. Here we outline these parallel metal-plasma-based research programs and describe the hardware that we've developed and some of the surface modification research that we've done with it.

Brown, I.G.

1992-10-01T23:59:59.000Z

111

DOE to Hold Public Information Meetings On Proposed Permit Modification  

NLE Websites -- All DOE Office Websites (Extended Search)

Meeting Meeting On Proposed Permit Modification CARLSBAD, N.M., January 31, 2001 - The public is invited to comment on a proposed modification to the Hazardous Waste Facility Permit for the Waste Isolation Pilot Plant (WIPP). Submittal of the proposed modification to the New Mexico Environment Department (NMED) by the U.S. Department of Energy (DOE) begins a formal review process that includes a 60-day public comment period and a public information meeting. In its request, DOE proposes alternative methods of quality control for radiography, which is currently done through visual examination. The proposed alternative is Digital Radiography/Computed Tomography. The modification would allow DOE to take advantage of new technology that enables analysis of the contents of

112

EIS-0435: Modification of the Groton Generation Station Interconnection  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: Modification of the Groton Generation Station 5: Modification of the Groton Generation Station Interconnection Agreement, Brown County, South Dakota EIS-0435: Modification of the Groton Generation Station Interconnection Agreement, Brown County, South Dakota Summary This EIS evaluates the environmental impacts of a proposal for DOE's Western Area Power Administration to modify its Large Generator Connection Agreement for the Groton Generation Station in Brown County, South Dakota. The modification would allow Basin Electric Power Cooperative, which operates the generation station, to produce power above the current operating limit of 50 average megawatts. Public Comment Opportunities No public comment opportunities available at this time. Documents Available for Download June 3, 2011 EIS-0435: Final Environmental Impact Statement

113

A study of housing modification in East Boston  

E-Print Network (OSTI)

This thesis deals with inhabitants' modifications of the 19th century sidehall houses in East Boston, now a predominantly Italian neighborhood. On the basis of the data obtained by a survey and observations, the practical ...

Yokouchi, Toshihito

1980-01-01T23:59:59.000Z

114

Equatorward Pathways of Solomon Sea Water Masses and Their Modifications  

Science Conference Proceedings (OSTI)

The Solomon Sea is a key region of the southwest Pacific Ocean, connecting the thermocline subtropics to the equator via western boundary currents (WBCs). Modifications to water masses are thought to occur in this region because of the significant ...

Angélique Melet; Jacques Verron; Lionel Gourdeau; Ariane Koch-Larrouy

2011-04-01T23:59:59.000Z

115

Design modifications in electrospinning setup for advanced applications  

Science Conference Proceedings (OSTI)

The paper deals with the modification made to the general electrospinning setup. The emphasis is given to characterize the designs based on their applicability. Four basic categories are identified, namely, patterned fibers, fiber yarns, multicomponent, ...

Rahul Sahay; Velmurugan Thavasi; Seeram Ramakrishna

2011-01-01T23:59:59.000Z

116

An Approach to Gravity Modification as a Propulsion Technology  

Science Conference Proceedings (OSTI)

Gravity modification as a portable non?mass effect is feasible. Contemporary experiments such as HFGW and LIGO require mass to model gravitational acceleration and gravitational waves. A different approach to gravitational acceleration

Benjamin T. Solomon

2009-01-01T23:59:59.000Z

117

Containment canister for capturing hazardous waste debris during piping modifications  

DOE Patents (OSTI)

The present invention relates to a containment canister for capturing hazardous waste debris during modifications to gloveboxes, or other radiological or biochemical hoods (generally termed gloveboxes therein), that require drilling and welding operations. Examples of such modifications include penetrations for pipe, thermowells, etc. In particular, the present invention relates to an improved containment canister that eliminates the need for costly containment huts and additional man power while at the same time reducing the risk of radiation exposure or other biohazard exposure to workers during glovebox modifications. The present invention also provides an improved hole saw which enables a driller to remove metal shavings and replace the hole saw if there is tooth wear present on the hole saw prior to actually penetrating a glovebox during modifications.

Dozier, Stanley B.

2001-09-30T23:59:59.000Z

118

A Training Program for Weather-Modification Pilots  

Science Conference Proceedings (OSTI)

A training program that has been conducted since 1974 to educate pilots in the principles of weather modification is described. The program offers theoretical and practical instruction in cloud seeding, including on-the-job experience. Some ...

Michael R. Poellot

1987-01-01T23:59:59.000Z

119

Fundamental & Applied Bioenergy | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

a new generation of efficient bioenergy strategies that will reduce U.S. dependence on foreign oil and help curb carbon emissions. Fundamental and applied bioenergy research at...

120

Applied Control Strategies at a Cogeneration Plant.  

E-Print Network (OSTI)

?? The purpose of this paper is to demonstrate the effectiveness of “classical strategies for dynamic control” on authentic cogeneration processes. These strategies are applied… (more)

Burns, Joseph William

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Applied Quantum Technology AQT | Open Energy Information  

Open Energy Info (EERE)

AQT Jump to: navigation, search Name Applied Quantum Technology (AQT) Place Santa Clara, California Zip 95054 Product California-based manufacturer of CIGS (copper indium gallium...

122

Applied technology section. Monthly report, March 1994  

Science Conference Proceedings (OSTI)

This is a monthly report giving the details on research currently being conducted at the Savannah River Technology Center. The following are areas of the research, engineering modeling and simulation, applied statistics, applied physics,experimental thermal hydraulics,and packaging and transportation.

Buckner, M.R.

1994-04-20T23:59:59.000Z

123

DRAFT GUIDANCE Applying for Other Uses of  

E-Print Network (OSTI)

DRAFT GUIDANCE Applying for Other Uses of Phosphogypsum: Submitting a Complete Petition 40 CFR 61 Assignment 0-2 #12;Applying for Other Uses of Phosphogypsum: Submitting a Complete Petition Table of Contents phosphogypsum in stacks? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.4. What

124

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2013 3, 2013 CX-010294: Categorical Exclusion Determination Building For Re-Roofing Project CX(s) Applied: B1.23, B2.1, B2.5 Date: 05/03/2013 Location(s): Oregon Offices(s): National Energy Technology Laboratory May 3, 2013 CX-010292: Categorical Exclusion Determination Modification to the Petrography Laboratory CX(s) Applied: B2.3, B3.6 Date: 05/03/2013 Location(s): West Virginia Offices(s): National Energy Technology Laboratory May 3, 2013 CX-010291: Categorical Exclusion Determination Interstate Electrification Improvement CX(s) Applied: B5.1 Date: 05/03/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory May 3, 2013 CX-010289: Categorical Exclusion Determination Interstate Electrification Improvement CX(s) Applied: B5.1 Date: 05/03/2013 Location(s): Texas

125

Categorical Exclusion Determinations: B2.5 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 24, 2012 January 24, 2012 CX-007626: Categorical Exclusion Determination Lapeyre Stair Installation CX(s) Applied: B2.5 Date: 01/24/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office January 19, 2012 CX-007634: Categorical Exclusion Determination Replace 802-H Platform/Control Valve Ladder with New Lapeyre Stairs CX(s) Applied: B2.5 Date: 01/19/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office January 18, 2012 CX-007640: Categorical Exclusion Determination Fire Suppression System Modifications, 772-1F CX(s) Applied: B2.5 Date: 01/18/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office January 17, 2012 CX-007526: Categorical Exclusion Determination Kentucky-County-Kenton CX(s) Applied: B2.5, B5.1

126

Improved Water Flooding through Injection Brine Modification  

Science Conference Proceedings (OSTI)

Crude oil/brine/rock interactions can lead to large variations in the displacement efficiency of waterflooding, by far the most widely applied method of improved oil recovery. Laboratory waterflood tests show that injection of dilute brine can increase oil recovery. Numerous fields in the Powder River basin have been waterflooded using low salinity brine (about 500 ppm) from the Madison limestone or Fox Hills sandstone. Although many uncertainties arise in the interpretation and comparison of field production data, injection of low salinity brine appears to give higher recovery compared to brine of moderate salinity (about 7,000 ppm). Laboratory studies of the effect of brine composition on oil recovery cover a wide range of rock types and crude oils. Oil recovery increases using low salinity brine as the injection water ranged from a low of no notable increase to as much as 37.0% depending on the system being studied. Recovery increases using low salinity brine after establishing residual oil saturation (tertiary mode) ranged from no significant increase to 6.0%. Tests with two sets of reservoir cores and crude oil indicated slight improvement in recovery for low salinity brine. Crude oil type and rock type (particularly the presence and distribution of kaolinite) both play a dominant role in the effect that brine composition has on waterflood oil recovery.

Robertson, Eric Partridge; Thomas, Charles Phillip; Morrow, Norman; (U of Wyoming)

2003-01-01T23:59:59.000Z

127

Applied Materials Inc AMAT | Open Energy Information  

Open Energy Info (EERE)

Inc AMAT Inc AMAT Jump to: navigation, search Name Applied Materials Inc (AMAT) Place Santa Clara, California Zip 95052-8039 Sector Solar Product US-based manufacturer of equipment used in solar (silicon, thin-film, BIPV), semiconductor, and LCD markets. References Applied Materials Inc (AMAT)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Applied Materials Inc (AMAT) is a company located in Santa Clara, California . References ↑ "Applied Materials Inc (AMAT)" Retrieved from "http://en.openei.org/w/index.php?title=Applied_Materials_Inc_AMAT&oldid=342244" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes

128

Applied Materials Wind Turbine | Open Energy Information  

Open Energy Info (EERE)

Wind Turbine Wind Turbine Jump to: navigation, search Name Applied Materials Wind Turbine Facility Applied Materials Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Applied Materials Developer Applied Materials Energy Purchaser Applied Materials Location Gloucester MA Coordinates 42.62895426°, -70.65153122° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.62895426,"lon":-70.65153122,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

129

Applying System Engineering to Pharmaceutical Safety  

E-Print Network (OSTI)

While engineering techniques are used in the development of medical devices and have been applied to individual healthcare processes, such as the use of checklists in surgery and ICUs, the application of system engineering ...

Couturier, Matthieu

130

Applied Information Security, 1st edition  

Science Conference Proceedings (OSTI)

Applied Information Security guides readers through the installation and basic operation of IT Security software used in the industry today. Dos Commands; Password Auditors; Data Recovery & Secure Deletion; Packet Sniffer; Port Scanners; Vulnerability ...

Randy Boyle

2009-07-01T23:59:59.000Z

131

Baldrige FAQs: Applying for the Award  

Science Conference Proceedings (OSTI)

... often use their feedback reports in their strategic planning processes to focus ... How long does it take to apply for the ... How long will it take to do a self ...

2013-05-21T23:59:59.000Z

132

Applied Field Research Initiative Deep Vadose Zone  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Applied Field Research Initiative Applied Field Research Initiative Deep Vadose Zone Located on the Hanford Site in Richland, Washington, the Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources by addressing the challenge of preventing contamination in the deep vadose zone from reaching groundwater. Led by the Pacific Northwest National Laboratory, the Initiative is a collaborative effort that leverages Department of Energy (DOE) investments in basic science and applied research and the work of site contractors to address the complex deep vadose zone contamination challenges. Challenge Many vadose zone environments within the DOE complex consist of complex stratified layers of unconsolidated and water-unsaturated sediments that are, in many places, con-

133

Applied Virtual Intelligence in Oil & Gas Industry;  

E-Print Network (OSTI)

1 Applied Virtual Intelligence in Oil & Gas Industry; Past, Present, & Future Shahab D. Mohaghegh on a daily basis by almost everyone. Credit Card Fraud Detection Bank Loan Approval Bomb Sniffing Devices

Mohaghegh, Shahab

134

Ethanol fuel modification for highway vehicle use. Final report  

DOE Green Energy (OSTI)

A number of problems that might occur if ethanol were used as a blending stock or replacement for gasoline in present cars are identified and characterized as to the probability of occurrence. The severity of their consequences is contrasted to those found with methanol in a previous contract study. Possibilities for correcting several problems are reported. Some problems are responsive to fuel modifications but others require or are better dealt with by modification of vehicles and the bulk fuel distribution system. In general, problems with ethanol in blends with gasoline were found to be less severe than those with methanol. Phase separation on exposure to water appears to be the major problem with ethanol/gasoline blends. Another potentially serious problem with blends is the illict recovery of ethanol for beverage usage, or bootlegging, which might be discouraged by the use of select denaturants. Ethanol blends have somewhat greater tendency to vapor lock than base gasoline but less than methanol blends. Gasoline engines would require modification to operate on fuels consisting mostly of ethanol. If such modifications were made, cold starting would still be a major problem, more difficult with ethanol than methanol. Startability can be provided by adding gasoline or light hydrocarbons. Addition of gasoline also reduces the explosibility of ethanol vapor and furthermore acts as denaturant.

Not Available

1980-01-01T23:59:59.000Z

135

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 11. CONTRACT...  

National Nuclear Security Administration (NNSA)

SOlICITATION NO. 98. DATED (SEE ITEM 11) 1 MODIFICATION OF CONTRACTIORDER NO. DE-AC05-000R22800 lOB. DATED (SEE ITEM 13) A"auat 31 2000 11. THIS ITEM ONLY APpues TO AMENDMENTS OF...

136

Modification of the Colony Tower for the RIO BLANCO detonation  

SciTech Connect

The tower is a 180-ft tall steel-frame experimental oil shale processing retort structure with heavy process equipment on various levels. The structural response of the tower to the ground motion from Project Rio Blanco is analyzed and the necessary structural modifications described. (TFD)

Blume, J.A.; Lee, L.A.; Freeman, S.A.; Honda, K.K.

1974-04-30T23:59:59.000Z

137

How to Apply | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply How to Apply How to Apply Awards are made through a formal process that has changed dramatically since 2011. So let us walk you through it step by step. "Innovation pays." - John Kao, Innovation Nation Submit a Letter of Intent On October 28, 2013, the U.S. Department of Energy (DOE) announced on the DOE SBIR website a preview version of the technical topics for which it will later accept funding applications. These topics will be found on the DOE's Funding Opportunity Announcements page. The EE SBIR page lists those topics that are cleantech (specific to EERE). We also recommend that you sign up for the EE-SBIR and DOE-SBIR mailing lists. The EE SBIR mailing list signup is at https://public.govdelivery.com/accounts/USEERE/subscriber/new?topic_id=USEERE_442.

138

Applied Field Research Initiative Attenuation Based Remedies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PA00133 - March 2011 PA00133 - March 2011 Applied Field Research Initiative Attenuation Based Remedies in the Subsurface Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) was established to develop the tools, approaches and technologies that will be required to address the technical challenges associated characteriza- tion, remediation and long-term monitoring of recalcitrant compounds in the subsurface at Department of Energy (DOE) Environmental Management (EM) sites. The ABRS AFRI site provides a unique setting for researchers in both applied and basic science fields. A wealth of subsurface data is available to support research activities and remedial decision making.

139

Applied Process Engineering Laboratory | Open Energy Information  

Open Energy Info (EERE)

Applied Process Engineering Laboratory Applied Process Engineering Laboratory Name Applied Process Engineering Laboratory Address 350 Hills Street, Suite #101 Place Richland, Washington Zip 99354 Region Pacific Northwest Area Coordinates 46.3389754°, -119.2716263° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":46.3389754,"lon":-119.2716263,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

140

Modeling International Relationships in Applied General Equilibrium  

Open Energy Info (EERE)

Modeling International Relationships in Applied General Equilibrium Modeling International Relationships in Applied General Equilibrium (MIRAGE) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Modeling International Relationships in Applied General Equilibrium (MIRAGE) Agency/Company /Organization: International Food Policy Research Institute, Centre d'Etudes Prospectives et d'Informations Internationales (CEPII) Focus Area: Economic Development Topics: Co-benefits assessment, - Macroeconomic Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Moderate Website: www.ifpri.org/book-5076/ourwork/program/mirage-model RelatedTo: Global Trade Analysis Project (GTAP) Data Base

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Applied Ventures LLC | Open Energy Information  

Open Energy Info (EERE)

Applied Ventures LLC Applied Ventures LLC Name Applied Ventures LLC Address 3050 Bowers Avenue Place Santa Clara, California Zip 95054 Region Southern CA Area Product Venture capital. Number of employees 1-10 Phone number (408) 727-5555 Website http://www.appliedventures.com Coordinates 37.37751°, -121.978721° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.37751,"lon":-121.978721,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

142

Applying Adaptive Evolutionary Algorithms to Hard Problems  

E-Print Network (OSTI)

Applying Adaptive Evolutionary Algorithms to Hard Problems J.I. van Hemert1 jvhemert into two distinct parts. The main theme is adaptive evolutionary algorithms. The rst part covers. The second part mainly consists of the development of a library. Its use is aimed at evolutionary algorithms

Emmerich, Michael

143

Uniform insulation applied-B ion diode  

DOE Patents (OSTI)

An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, and ions may be focused at a point on the z axis.

Seidel, D.B.; Slutz, S.A.

1986-04-11T23:59:59.000Z

144

Uniform insulation applied-B ion diode  

DOE Patents (OSTI)

An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, the ions may be focused at a point on the z axis.

Seidel, David B. (Albuquerque, NM); Slutz, Stephen A. (Albuquerque, NM)

1988-01-01T23:59:59.000Z

145

Applying Human Factors during the SIS Life Cycle  

SciTech Connect

Safety Instrumented Systems (SIS) are widely used in U.S. Department of Energy's (DOE) nonreactor nuclear facilities for safety-critical applications. Although use of the SIS technology and computer-based digital controls, can improve performance and safety, it potentially introduces additional complexities, such as failure modes that are not readily detectable. Either automated actions or manual (operator) actions may be required to complete the safety instrumented function to place the process in a safe state or mitigate a hazard in response to an alarm or indication. DOE will issue a new standard, Application of Safety Instrumented Systems Used at DOE Nonreactor Nuclear Facilities, to provide guidance for the design, procurement, installation, testing, maintenance, operation, and quality assurance of SIS used in safety significant functions at DOE nonreactor nuclear facilities. The DOE standard focuses on utilizing the process industry consensus standard, American National Standards Institute/ International Society of Automation (ANSI/ISA) 84.00.01, Functional Safety: Safety Instrumented Systems for the Process Industry Sector, to support reliable SIS design throughout the DOE complex. SIS design must take into account human-machine interfaces and their limitations and follow good human factors engineering (HFE) practices. HFE encompasses many diverse areas (e.g., information display, user-system interaction, alarm management, operator response, control room design, and system maintainability), which affect all aspects of system development and modification. This paper presents how the HFE processes and principles apply throughout the SIS life cycle to support the design and use of SIS at DOE nonreactor nuclear facilities.

Avery, K.

2010-05-05T23:59:59.000Z

146

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 30, 2012 August 30, 2012 CX-009100: Categorical Exclusion Determination Cooling Tower Water Sampling and Analysis for Legionella Pneumophila Density CX(s) Applied: B3.6 Date: 08/30/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 29, 2012 CX-009106: Categorical Exclusion Determination Dismantle/Remove Vacuum System and Related Equipment in 772-F CX(s) Applied: B1.3 Date: 08/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 29, 2012 CX-009105: Categorical Exclusion Determination 284-H Track Coal Hopper Pit Modifications CX(s) Applied: B1.28 Date: 08/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 29, 2012 CX-009104: Categorical Exclusion Determination Infrastructure Modification for the Mobile Plutonium Facility (MPF) at the

147

Categorical Exclusion Determinations: B2.2 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 13, 2012 September 13, 2012 CX-009389: Categorical Exclusion Determination Security Camera Installation CX(s) Applied: A11, B1.7, B1.15, B2.2, B2.3 Date: 09/13/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory September 12, 2012 CX-009263: Categorical Exclusion Determination Design for High Performance Sustainable Building Modifications Based on E4 Report - PGH CX(s) Applied: B1.15, B1.23, B2.2 Date: 09/12/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory September 12, 2012 CX-009262: Categorical Exclusion Determination Design for High Performance Sustainable Building Modifications Based on E4 Report - MGN CX(s) Applied: B1.15, B1.23, B2.2 Date: 09/12/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory

148

Title Page Applied and Environmental Microbiology 1  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied and Environmental Microbiology 1 Applied and Environmental Microbiology 1 2 Title Natural Competence in Thermoanaerobacter and Thermoanaerobacterium Species 3 Running Title Thermonanerobacter Natural Competence 4 5 Authors and Affiliations 6 A. Joe Shaw 1,2 , David A. Hogsett 1 , Lee R. Lynd 1,2,3 * 7 1 Mascoma Corporation, Lebanon, NH 03766 8 2 Thayer School of Engineering, Dartmouth College, Hanover, NH 03755 9 3 Department of Biological Sciences, Dartmouth College, Hanover, NH 03755 10 11 Corresponding Author 12 Lee R. Lynd 13 Thayer School of Engineering, Dartmouth College, Hanover, NH 03755 14 Phone: 603.646.2231 15 Email: lee.lynd@dartmouth.edu 16 17 18 19 20 21 22 23 Copyright © 2010, American Society for Microbiology and/or the Listed Authors/Institutions. All Rights Reserved.

149

Fundamental & Applied Bioenergy | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Bioenergy Bioenergy SHARE Fundamental and Applied Bioenergy Steven Brown (left) and Shihui Yang have developed a microbial strain with an improved ability to convert wood products to biofuel as part of research within the DOE BioEnergy Science Center.Source: ORNL News article ORNL researchers are investigating the biological mechanisms underlying production of biofuels so that those mechanisms can be improved and used to develop a new generation of efficient bioenergy strategies that will reduce U.S. dependence on foreign oil and help curb carbon emissions. Fundamental and applied bioenergy research at ORNL includes studies conducted within the BioEnergy Science Center and the following research areas: Bioconversion Science and Technology Plant-Microbe Interfaces

150

Apply for Beam Time | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply for Beam Time Apply for Beam Time NEXT PROPOSAL DEADLINE: March 7, 2014 @ 11:59 PM (Chicago time) Submit Proposal » SEE ALSO: Calendar: deadlines, run & review dates Help Page: frequently asked questions, tips for success, common errors, blank forms, instructions Review Criteria Sectors Directory: check CAT websites for info about managed beam time The Run 2014-2 proposal submission deadline is 11:59 p.m. (Chicago time) March 7, 2014. The system will open to accept proposals beginning December 20, 2013. NEW USERS: to avoid delays and to make the most of your time on site, read Become a User. You must register as a user and receive a badge number before submitting a proposal. About the Beam Time Request Process All beam time at the APS must be requested each cycle through the web-based

151

Applying DSM evaluation results to utility planning  

SciTech Connect

This paper describes the results of a study to assess the application of DSM evaluation results to utility forecasting and planning. The paper has three objectives: (1) identify forecasting and planning applications of evaluation studies, (2) identify major obstacles and problems associated with applying evaluation results to forecasting and planning, and (3) suggest approaches to address the major problems. The paper summarizes results from interviews with utilities, regulators, and consultants to determine how the utility industry currently applies evaluation results in forecasting and planning. The paper also includes results from a detailed case study of Sacramento Municipal Utility District (SMUD) and Southern California Edison Company (SCE), two utilities with large DSM programs and active evaluation efforts.

Baxter, L.W.

1995-07-01T23:59:59.000Z

152

Effects of Structural Modification on Ionic Liquid Physical Properties  

NLE Websites -- All DOE Office Websites (Extended Search)

Effect of Structural Modification on the Physical Properties Effect of Structural Modification on the Physical Properties of Various Ionic Liquids S. I. Lall-Ramnarine, J. L. Hatcher, A. Castano, M. F. Thomas, and J. F. Wishart in "ECS Transactions - Las Vegas, NV, Vol. 33, Molten Salts and Ionic Liquids 17" D. Fox et al., Eds.; The Electrochemical Society, Pennington, NJ, (2010) pp 659 - 665. [Find paper at ECS] Abstract: A few classes of ionic liquids were synthesized and investigated for their physical properties as a function of structural variation. Bis(oxalato)borate (BOB) and bis(trifluoromethylsulfonyl)imide (NTf2) ionic liquids (ILs) containing pyridinium, 4-dimethylaminopyridinium (DMAP) and pyrrolidinium cations bearing alkyl, benzyl, hydroxyalkyl and alkoxy substituents, were prepared from the corresponding halide salts. The

153

IPAGE OF PAGES AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

. CONTRACT 10 CODE . CONTRACT 10 CODE IPAGE OF PAGES AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 I 1 2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 15. PROJECT NO. (If appl/cab/e) 216 See Block 16C 6. ISSUED BY CODE 05007 7. ADMINISTERED BY (ffother than Ilem 6) CODE \05007 NNSA/Pantex Site Office NNSA/Pantex Site Office U.S. Department of Energy U.S. Department of Energy NNSA/Pantex Site Office NNSA/Pantex Site Office P.O. Box 30030 P.O. Box 30030 Amarillo TX 79120-0030 Amarillo TX 79120-0030 8. NAME AND ADDRESS OF CONTRACTOR (No., streot, county, S1ste end ZIP Code) (x) 9A. AMENDMENT OF SOLICITATION NO. r ABCOCK & WILCOX TECHNICAL SERVICES PANTEX. L L C ttn: GARY ALLEN 98. DATED (SEE ITEM 11) .0. BOX 30020 AMARILLO TX 791200000

154

Material Analyses and Modification on the Tandetron Accelerator  

SciTech Connect

The Tandetron 4130MC accelerator of the Nuclear Physics Institute offers new possibilities of analyses and modification of materials by ion beams. The RBS, ERDA-TOF, RBS-channeling and PIXE methods are briefly described. Examples of analyses of materials for photonics and spintronics are presented. Also the results of investigation of polymers modified by ion implantation, which may find application in medicine, are presented.

Mackova, A.; Malinsky, P. [Nuclear Physics Institute, Academy of Sciences of the Czech Republic, 250 68 Rez (Czech Republic); Department of Physics, Faculty of Science, J. E. Purkinje-University, Ceske mladeze 8, 400 96 Usti nad Labem (Czech Republic); Svorcik, V. [Department of Solid State Engineering, Institute of Chemical Technology, Technicka 5, 166 28 Prague (Czech Republic); Hnatowicz, V. [Nuclear Physics Institute, Academy of Sciences of the Czech Republic, 250 68 Rez (Czech Republic); Bocan, J. [Nuclear Physics Institute, Academy of Sciences of the Czech Republic, 250 68 Rez (Czech Republic); Department of Physics, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Brehova 7, 115 19 Praha 1 (Czech Republic); Khaibullin, R.I. [Kazan Physical-Technical Institute of RAS, Sibirski Trakt 10/7, 420029 Kazan, (Russian Federation); Nekvindova, P. [Department of Inorganic Chemistry, Institute of Chemical Technology, Technickd 5, 166 28 Prague (Czech Republic)

2007-11-26T23:59:59.000Z

155

Industrial Uses of Vegetable OilsChapter 1 Genetic Modification of Seed Oils for Industrial Applications  

Science Conference Proceedings (OSTI)

Industrial Uses of Vegetable Oils Chapter 1 Genetic Modification of Seed Oils for Industrial Applications Processing eChapters Processing Press Downloadable pdf of Chapter 1 Genetic Modification of Seed Oils for I

156

Modification of a biosand filter in the northern region of Ghana  

E-Print Network (OSTI)

Four local plastic design (LPD) BSFs were constructed in Northern Region, Ghana, to test and evaluate an experimental modification of the LPD BSF for treatment of highly turbid water. Modifications of the LPD BSFs were ...

Kikkawa, Izumi

2008-01-01T23:59:59.000Z

157

Nutritionally Enhanced Edible Oil and Oilseed ProcessingChapter 14 Biocatalysis for Lipid Modifications  

Science Conference Proceedings (OSTI)

Nutritionally Enhanced Edible Oil and Oilseed Processing Chapter 14 Biocatalysis for Lipid Modifications Processing eChapters Processing Press Downloadable pdf of Chapter 14 Biocatalysis for Lipid Modifications fr

158

11. CONTRACT 10 CODE OF PAGESIPAGE AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

E-Print Network (OSTI)

. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE (M/DIY) 4. REQUISITION/PURCHASE REQ. NO. 15. PROJECT NO. (If

159

Drug delivery from hydrophobic-modified mesoporous silicas: Control via modification level and site-selective modification  

SciTech Connect

Dimethylsilyl (DMS) modified mesoporous silicas were successfully prepared via co-condensation and post-grafting modification methods. The post-grafting modification was carried out by the reaction of the as-synthesized MCM-41 material (before CTAB removal) with diethoxydimethylsinale (DEDMS). N{sub 2} adsorption-desorption and {sup 29}Si MAS NMR characterization demonstrated that different amount of DMS groups were successfully incorporated into the co-condensation modified samples, and the functional DMS groups were placed selectively on the pore openings and external pore surfaces in the post-grafting modified samples. Subsequently, the controlled drug delivery properties from the resulting DMS-modified mesoporous silicas were investigated in detail. The drug adsorption experiments showed that the adsorption capacities were mainly depended on the content of silanol group (CSG) in the corresponding carriers. The in vitro tests exhibited that the incorporation of DMS groups greatly retarded the ibuprofen release rate. Moreover, the ibuprofen release profiles could be well modulated by varying DMS modification levels and site-selective distribution of functional groups in mesoporous carriers. - The distribution of DMS groups on the pore surfaces of the mesostructures strongly affects the drug release rate. The P-M41-1 and the P-M41-2 possess the close DMS modification levels as the C-M41-10, but the ibuprofen release rates from the P-M41-1 and P-M41-2 are much slower than that from the C-M41-10.

Tang Qunli, E-mail: tangqunli@hnu.c [College of Materials Science and Engineering, and Center for High-Resolution Electron Microscopy, Hunan University, Changsha 410082 (China); State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001 (China); Chen Yuxi; Chen Jianghua; Li Jin [College of Materials Science and Engineering, and Center for High-Resolution Electron Microscopy, Hunan University, Changsha 410082 (China); Xu Yao; Wu Dong; Sun Yuhan [State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001 (China)

2010-01-15T23:59:59.000Z

160

Applied Environmental Microbiology | VIMSS - Virtual Institute for  

NLE Websites -- All DOE Office Websites (Extended Search)

Collection of Soil Samples Collection of Soil Samples Identification of Natural Stressors Profiling of Microbial Population Field and Simulated Conceptual Model Facilities The Applied Environmental Microbiology (AEM) Core is the source of environmental data and samples that determine the stressors that will be studied, pro-vides the environments for growing the organisms to be tested, simulates stressed environments, and verifies the conceptual models to determine how these stress regulatory pathways control the biogeochemistry of contaminated sites. The specific goals of the AEM Core are to: Survey and map DOE sites contaminated by metals and radionuclides using chemical and molecular/ microbiological parameters to determine major microbial populations and potential stressors for Desulfovibrio vulgaris,

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Statistical Uncertainty Analysis Applied to Criticality Calculation  

Science Conference Proceedings (OSTI)

In this paper, we present an uncertainty methodology based on a statistical approach, for assessing uncertainties in criticality prediction using monte carlo method due to uncertainties in the isotopic composition of the fuel. The methodology has been applied to criticality calculations with MCNP5 with additional stochastic input of the isotopic fuel composition. The stochastic input were generated using the latin hypercube sampling method based one the probability density function of each nuclide composition. The automatic passing of the stochastic input to the MCNP and the repeated criticality calculation is made possible by using a python script to link the MCNP and our latin hypercube sampling code.

Hartini, Entin; Andiwijayakusuma, Dinan; Susmikanti, Mike; Nursinta, A. W. [Centre for Nuclear Informatics Development, National Nuclear Energy Agency of Indonesia (Indonesia)

2010-06-22T23:59:59.000Z

162

Quantitative Analysis of Histone Modifications: Formaldehyde Is a Source of Pathological N6-Formyllysine That Is Refractory to Histone Deacetylases  

E-Print Network (OSTI)

Aberrant protein modifications play an important role in the pathophysiology of many human diseases, in terms of both dysfunction of physiological modifications and the formation of pathological modifications by reaction ...

Edrissi, Bahar

163

The Applied Mathematics for Power Systems (AMPS)  

SciTech Connect

Increased deployment of new technologies, e.g., renewable generation and electric vehicles, is rapidly transforming electrical power networks by crossing previously distinct spatiotemporal scales and invalidating many traditional approaches for designing, analyzing, and operating power grids. This trend is expected to accelerate over the coming years, bringing the disruptive challenge of complexity, but also opportunities to deliver unprecedented efficiency and reliability. Our Applied Mathematics for Power Systems (AMPS) Center will discover, enable, and solve emerging mathematics challenges arising in power systems and, more generally, in complex engineered networks. We will develop foundational applied mathematics resulting in rigorous algorithms and simulation toolboxes for modern and future engineered networks. The AMPS Center deconstruction/reconstruction approach 'deconstructs' complex networks into sub-problems within non-separable spatiotemporal scales, a missing step in 20th century modeling of engineered networks. These sub-problems are addressed within the appropriate AMPS foundational pillar - complex systems, control theory, and optimization theory - and merged or 'reconstructed' at their boundaries into more general mathematical descriptions of complex engineered networks where important new questions are formulated and attacked. These two steps, iterated multiple times, will bridge the growing chasm between the legacy power grid and its future as a complex engineered network.

Chertkov, Michael [Los Alamos National Laboratory

2012-07-24T23:59:59.000Z

164

EG G Mound Applied Technologies payroll system  

SciTech Connect

EG G Mound Applied Technologies, Inc., manages and operates the Mound Facility, Miamisburg, Ohio, under a cost-plus-award-fee contract administered by the Department of Energy's Albuquerque Field Office. The contractor's Payroll Department is responsible for prompt payment in the proper amount to all persons entitled to be paid, in compliance with applicable laws, regulations, and legal decisions. The objective was to determine whether controls were in place to avoid erroneous payroll payments. EG G Mound Applied Technologies, Inc., did not have all the internal controls required by General Accounting Office Title 6, Pay, Leave, and Allowances.'' Specifically, they did not have computerized edits, separation of duties and responsibilities, and restricted access to payroll data files. This condition occurred because its managers were not aware of Title 6 requirements. As a result, the contractor could not assure the Department of Energy that payroll costs were processes accurately; and fraud, waste, or abuse of Department of Energy funds could go undetected. Our sample of 212 payroll transactions from a population of 66,000 in FY 1991 disclosed only two minor processing errors and no instances of fraud, waste or abuse.

Not Available

1992-02-07T23:59:59.000Z

165

A Case Study of the Applied Learning Academy: Reconceptualized Quantum Design of Applied Learning  

E-Print Network (OSTI)

The purpose of this qualitative study was to examine the Applied Learning Academy (ALA) and allow the lessons learned from this public school to emerge from the narrative stories of past students, parents, teachers, administrators, and local business associates who have been directly involved and influenced by the applied learning teaching method. Accountability is critical for all public and charter schools. Districts have been trying to raise the standards with new programs and strategies in an effort to make learning experiences relevant to students? daily lives. Revisiting John Dewey?s philosophy from the progressive movement, project-based, service learning, community partnerships, and portfolio assessment helped to create the applied learning method. In the present study, a qualitative case study approach was utilized to identify successful factors, benefits, and drawbacks of applied learning in order to describe the transition of portfolio assessment, project-based learning, and community-based partnerships within the classroom and to understand the impact and misconceptions of applied learning as experienced through the Recognized Campus, ALA, a 6-8th public middle school within a large urban school district. Participant interviews, field observations, and historical records were collected which indicated that student centered project-based curriculum, small school size creating family relationships, community involvement with partnerships, service learning projects, and metacognitive development from portfolio assessments were the major factors that supported academic rigor and relevance because of the real educational applications in this applied learning middle school. Briefly defined, applied learning is when a problem is seen within the surrounding community, and the solution is generated by the students. This progressive 15-year impact of applied learning ultimately leads to the development of four applied learning schools despite the misconception that applied learning was a remedial or gifted program. Redefining applied learning for a better understanding developed a reconceptualized diagram borrowed from the quantum mechanics model. Reconceptualization expands the interpretation by increasing the intellectual flexibility. As the student becomes energized from the acquired knowledge of learning applicable skills through service learning, project-based curriculum, and portfolio assessment, the student?s academic growth should increase to a higher, educational ?energy level? supported by the critical, situated-learning, and feminist theories.

Gordon, Denise

2009-12-01T23:59:59.000Z

166

CX-009263: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Design for High Performance Sustainable Building Modifications Based on E4 Report - PGH CX(s) Applied: B1.15, B1.23, B2.2 Date: 09/12/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

167

CX-009262: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Design for High Performance Sustainable Building Modifications Based on E4 Report - MGN CX(s) Applied: B1.15, B1.23, B2.2 Date: 09/12/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory

168

Applied Energy Management | Open Energy Information  

Open Energy Info (EERE)

Management Management Jump to: navigation, search Name Applied Energy Management Place Huntersville, North Carolina Zip 28078 Sector Efficiency, Renewable Energy Product North Carolina-based, energy efficiency and renewable energy service and construction company. Coordinates 35.409853°, -80.842716° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.409853,"lon":-80.842716,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

169

How to Apply for ENERGY STAR® Certification  

NLE Websites -- All DOE Office Websites (Extended Search)

ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü "How To" Series How to Apply for ENERGY STAR ® Certification Commercial buildings that earn EPA's ENERGY STAR certification perform in the top 25 percent of similar buildings nationwide, as verified by a Licensed Professional (a Professional Engineer or a Registered Architect). ENERGY STAR certified buildings use an average of 35 percent less energy and are responsible for 35 percent fewer greenhouse gas emissions than average buildings. To qualify for the ENERGY STAR, a property must achieve an ENERGY STAR score of 75 or higher on EPA's 1 - 100 scale, which compares a property's energy performance to

170

FY 1990 Applied Sciences Branch annual report  

DOE Green Energy (OSTI)

The Applied Sciences Branch actively supports the advancement of DOE/SERI goals for the development and implementation of the solar photovoltaic technology. The primary focus of the laboratories is to provide state-of-the-art analytical capabilities for materials and device characterization and fabrication. The branch houses a comprehensive facility which is capable of providing information on the full range of photovoltaic components. A major objective of the branch is to aggressively pursue collaborative research with other government laboratories, universities, and industrial firms for the advancement of photovoltaic technologies. Members of the branch disseminate research findings to the technical community in publications and presentations. This report contains information on surface and interface analysis, materials characterization, development, electro-optical characterization module testing and performance, surface interactions and FTIR spectroscopy.

Keyes, B.M.; Dippo, P.C. (eds.)

1991-11-01T23:59:59.000Z

171

Navigating without vision: Basic and applied research  

E-Print Network (OSTI)

ABSTRACT: We describe some of the results of our program of basic and applied research on navigating without vision. One basic research topic that we have studied extensively is path integration, a form of navigation in which perceived self-motion is integrated over time to obtain an estimate of current posilion and orientation. In experiments on pathway completion, one test of path integration ability, we have found that subjects who are passively guided over the outbound path without vision exhibit significant errors when attempting to return to the origin but are nevertheless sensitive to turns and segment lengths in the stimulus path. We have also found no major differences in path inlegration ability among blirid and sighted populations. A model we havc developed that attributes errors in path integration to errors in encoding the stimulus path is a good beginning toward understanding path integration performance. In otber research on path integration, in which optic flow information was manipulated in addition to the proprioceptive and vestibular information of nonvisual locomotion, we havc found that optic flow is a weak input to the path integration process. In other basic research, our studies of auditory distance perception in outdoor environments show systematic underestimation oC sound source distance. Our applied research has been concerned with developing and evaluating a navigation system for the visually impaired that uses three recent technologies: the Global Positioning System, Geographic Information Systems, and virtual acouslics. Our work shows that there is considerable promise of these three technologies in allowing visually impaired individuals to navigate and learn about unfamiliar environments without the assistance of human guides. (Optoni Vis Sci 2001;78:282-289)

Jack M. Loomis; Roberta L. Klatzky; Reginald G. Golledge

2001-01-01T23:59:59.000Z

172

Nanoparticle modifications of photodefined nanostructures for energy applications.  

Science Conference Proceedings (OSTI)

The advancement of materials technology towards the development of novel 3D nanostructures for energy applications has been a long-standing challenge. The purpose of this project was to explore photolithographically defineable pyrolyzed photoresist carbon films for possible energy applications. The key attributes that we explored were as follows: (1) Photo-interferometric fabrication methods to produce highly porous (meso, micro, and nano) 3-D electrode structures, and (2) conducting polymer and nanoparticle-modification strategies on these structures to provide enhanced catalytic capabilities and increase conductivity. The resulting electrodes were then explored for specific applications towards possible use in battery and energy platforms.

Polsky, Ronen; Xiao, Xiaoyin; Burckel, David Bruce; Brozik, Susan Marie; Washburn, Cody M.; Wheeler, David Roger

2011-10-01T23:59:59.000Z

173

Laser induced modification and ablation of InAs nanowires  

SciTech Connect

InAs nanowires were irradiated locally under an ambient condition using a focused laser beam, which led to laser ablation and thinning of the nanowires. We show that the laser beam can induce a reduction of the local As concentration in an InAs nanowire; the change leads to a significant decrease of local melting temperature of InAs, which results in the thinning and eventually breaking of the nanowire. The results indicate that chemical and mechanical modifications of an InAs nanowire can be accomplished by using a confocal laser beam, which may prove to be a convenient approach in fabricating nanostructural materials and nanodevices.

He Jiayu; Chen Pingping; Lu Wei; Dai Ning [Shanghai Institute of Technical Physics, Academy Science of China, Shanghai (China); Zhu Daming [Department of Physics, University of Missouri - Kansas City, Kansas City, Missouri 64110 (United States)

2012-05-01T23:59:59.000Z

174

Containment canister for capturing hazardous waste debris during piping modifications  

DOE Patents (OSTI)

The present invention relates to a capture and containment canister which reduces the risk of radiation and other biohazard exposure to workers, the need for a costly containment hut and the need for the extra manpower associated with the hut. The present invention includes the design of a canister having a specially designed magnetic ring that attracts and holds the top of the canister in place during modifications to gloveboxes and other types of radiological and biochemical hoods. The present invention also provides an improved hole saw that eliminates the need for a pilot bit.

Dozier, Stanley B. (North Augusta, SC)

2001-07-24T23:59:59.000Z

175

201/span>3 Short Course Applied Fundamentals in Interfacial Phenomena  

Science Conference Proceedings (OSTI)

Applied Fundamentals in Interfacial Phenomena Short Course held at the 104th AOCS Annual Meeting and Expo. 201/span>3 Short Course Applied Fundamentals in Interfacial Phenomena Applied Fundamentals in Interfacial Phenomena Saturday •

176

L AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

L L _ AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 25 7 See Block 16C 6 . 1SSUED BY CODE 0500 8 NNSA/ Oa kridge Site Office u.s. De pa rtment of Energ y NNSA/ Y-12 S it e Offic e P. O. Box 2 05 0 Bu ilding 97 0 4- 2 Oak Ridge TN 37831 8 . NAME AND ADDRESS OF CONTRACTOR (No., street, county. state and ZIP Code) ABCOCK & WILCOX TECHNICAL B A t t n: W ILLIE J. W I LSON PO BOX 2009 SERVICES Y- 12 , LLC ,1 . CONTRACT ID CODE I PAGE OF PAGES 1 I 1 4. REQUISITION/PURCHASE REO. NO. 15. PROJECT NO. (If applicable) 7. ADMINISTERED BY (If other than Item 6) coDE lo5008 NNSA/ Oakridg e Site Office u. s . Department o f Energ y NNSA/ Y-12 Site Of fi ce P. O. Bo x 2050 Building 9704 -2 Oak Ridge TN 37831 (x) 9A AMENDMENT OF SOLICITATION NO.

177

Medium modification of the proton form-factor  

SciTech Connect

I argue that the double ratio of proton-recoil polarization-transfer coefficients, P{prime}{sub x} and P{prime}{sub z}, of the quasielastic {sup 4}He(e,e{prime}p){sup 3}H reaction with respect to the elastic {sup 1}H(e,e{prime}p) reaction is sensitive to possible medium modifications of the proton form factor in {sup 4}He. Recent measurements at both Mainz and Jefferson Lab of this double ratio at four-momentum transfers squared between 0.4 (GeV/c){sup 2} and 2.6 (GeV/c){sup 2} are discussed. I show that the data challenge state-of-the-art conventional meson-nucleon calculations, as these are unable to describe the results. The data hint at the need to include medium modifications of the proton form factor, as predicted by a quark-meson-coupling model, in the calculations. A recently approved follow-up experiment at a Q{sup 2} of 0.8 (GeV/c){sup 2} and 1.3 (GeV/c){sup 2} with unprecedented precision will provide one of the most stringent tests of the applicability of various calculations.

Steffen Strauch

2004-02-01T23:59:59.000Z

178

Remediation of Mercury and Industrial Contaminants Applied Field...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Remediation of Mercury and Industrial Contaminants Applied Field Research...

179

Computational Advances in Applied Energy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advances in Applied Energy Computational Advances in Applied Energy Friedmann-LLNL-SEAB.10.11.pdf More Documents & Publications Director's Perspective by George Miller...

180

Attenuation-Based Remedies in the Subsurface Applied Field Research...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Subsurface Applied Field Research Initiative (ABRS AFRI) Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied...

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Applying Climate Information for Adaptation Decision-Making:...  

Open Energy Info (EERE)

Applying Climate Information for Adaptation Decision-Making: A Guidance and Resource Document Jump to: navigation, search Tool Summary Name: Applying Climate Information for...

182

Applying physics, teamwork to fusion energy science | Princeton...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applying physics, teamwork to fusion energy science American Fusion News Category: Massachusetts Institute of Technology (MIT) Link: Applying physics, teamwork to fusion energy...

183

Reduction of Glass Surface Reflectance by Ion Beam Surface Modification  

DOE Green Energy (OSTI)

This is the final report for DOE contract DE-EE0000590. The purpose of this work was to determine the feasibility of the reduction of the reflection from the front of solar photovoltaic modules. Reflection accounts for a power loss of approximately 4%. A solar module having an area of one square meter with an energy conversion efficiency of 18% generates approximately 180 watts. If reflection loss can be eliminated, the power output can be increased to 187 watts. Since conventional thin-film anti-reflection coatings do not have sufficient environmental stability, we investigated the feasibility of ion beam modification of the glass surface to obtain reduction of reflectance. Our findings are generally applicable to all solar modules that use glass encapsulation, as well as commercial float glass used in windows and other applications. Ion implantation of argon, fluorine, and xenon into commercial low-iron soda lime float glass, standard float glass, and borosilicate glass was studied by implantation, annealing, and measurement of reflectance. The three ions all affected reflectance. The most significant change was obtained by argon implantation into both low-iron and standard soda-lime glass. In this way samples were formed with reflectance lower than can be obtained with a single-layer coatings of magnesium fluoride. Integrated reflectance was reduced from 4% to 1% in low-iron soda lime glass typical of the glass used in solar modules. The reduction of reflectance of borosilicate glass was not as large; however borosilicate glass is not typically used in flat plate solar modules. Unlike conventional semiconductor ion implantation doping, glass reflectance reduction was found to be tolerant to large variations in implant dose, meaning that the process does not require high dopant uniformity. Additionally, glass implantation does not require mass analysis. Simple, high current ion implantation equipment can be developed for this process; however, before the process can be employed on full scale solar modules, equipment must be developed for ion implanting large sheets of glass. A cost analysis shows that the process can be economical. Our finding is that the reduction of reflectance by ion beam surface modification is technically and economically feasible. The public will benefit directly from this work by the improvement of photovoltaic module efficiency, and indirectly by the greater understanding of the modification of glass surfaces by ion beams.

Mark Spitzer

2011-03-11T23:59:59.000Z

184

Scrap tire reuse through surface-modification technology  

Science Conference Proceedings (OSTI)

Air Products and Chemicals, Inc. is developing a novel approach for reusing scrap tire rubber. The process involves the combination of scrap tire rubber particles with other materials to form higher value and higher performance composites. The process begins by grinding scrap tire to a fine particle size, and removing steel and fabric. The key to this approach is a proprietary surface-modification step which is critical for enhancing the compatibility with and bonding to other continuous phase matrix materials. Of all approaches for scrap tire rubber reuse, this approach offers the potential to recover (or save) the greatest amount of energy. Furthermore, this is the only approach which is clearly economically viable with current pricing and without a scrap tire tax. The process is environmentally innocuous, and capital requirements for large scale processing plants are projected to be modest. 7 figs.

Bauman, B.D.

1991-01-01T23:59:59.000Z

185

Plasma immersion surface modification with metal ion plasma  

SciTech Connect

We describe here a novel technique for surface modification in which metal plasma is employed and by which various blends of plasma deposition and ion implantation can be obtained. The new technique is a variation of the plasma immersion technique described by Conrad and co-workers. When a substrate is immersed in a metal plasma, the plasma that condenses on the substrate remains there as a film, and when the substrate is then implanted, qualitatively different processes can follow, including' conventional' high energy ion implantation, recoil implantation, ion beam mixing, ion beam assisted deposition, and metallic thin film and multilayer fabrication with or without species mixing. Multiple metal plasma guns can be used with different metal ion species, films can be bonded to the substrate through ion beam mixing at the interface, and multilayer structures can be tailored with graded or abrupt interfaces. We have fabricated several different kinds of modified surface layers in this way. 22 refs., 4 figs.

Brown, I.G.; Yu, K.M. (Lawrence Berkeley Lab., CA (USA)); Godechot, X. (Lawrence Berkeley Lab., CA (USA) Societe Anonyme d'Etudes et Realisations Nucleaires (SODERN), 94 - Limeil-Brevannes (France))

1991-04-01T23:59:59.000Z

186

Nuclear Medium Modifications of Hadrons from Generalized Parton Distributions  

E-Print Network (OSTI)

We study the structure of generalized parton distributions in spin 0 nuclei within a microscopic approach for nuclear dynamics. GPDs can be used on one side as tools to unravel the deep inelastic transverse structure of nuclei in terms of both transverse spatial and transverse momentum degrees of freedom. On the other, one can obtain information on GPDs themselves by observing how they become modified in the nuclear environment. We derive the structure of the nuclear deeply virtual Compton scattering tensor and generalized parton distributions at leading order in $Q$ in a field-theoretical framework. The nuclear generalized parton distributions are calculated using a two step process -- the convolution approach -- where the scattering process happens from a quark inside a nucleon, itself inside a nucleus, disregarding final state interactions with both the nuclear and nucleon debris. We point out that details of the nuclear long range interactions such as two-body currents, can be disregarded compared to the deep inelastic induced modifications of the bound GPDs. We show how the pattern of nuclear modifications predicted, and in particular the deviations of off-shell effects from the longitudinal convolution provide clear signals to be sought in experimental measurements. Finally, we find interesting relationships by studying Mellin moments in nuclei: in particular we predict the $A$-dependence for the $D$-term of GPDs within a microscopic approach, and the behavior with $t$ of the total momentum carried by quarks in a nucleus. The latter provides an important element for the evaluation of nuclear hadronization phenomena which are vital for interpreting current and future data at RHIC, HERMES and Jefferson Lab.

S. Liuti; S. K. Taneja

2005-04-04T23:59:59.000Z

187

AMT-4 RADISONDE TRANSMITTER MODIFICATION ASSEMBLY (USING THE NEW ALUMINUM- OXIDE HUMIDITY ELEMENT)  

SciTech Connect

A modification to the AMT-4 radiosonde transmitter and modulator which permits the use of a new aluminum oxide humidity element is described. The modification is simple enough to be made by relatively unskilled personnel in the field and involves: using the newly developed aluminum oxide humidity element, slightly modifying the transmitter, and slightly revising the modulator circuitry. The polarization problem usually associated with using humidity elements in a direct-current circuit is also minimized by this modification. (auth)

Stover, C.M.

1961-09-01T23:59:59.000Z

188

Modification of the U.S. Department of Energy`s (DOE) sytem of radiation protection requirements and guidance  

SciTech Connect

DOE has undertaken a major modification of its system of radiation protection guidance and requirements. The objectives of this modification are to (1) eliminate unnecessary and redundant requirements, (2) clearly delineate requirements from guidance, (3) codify all radiation protection requirements, and (4) move from a compliance based approach towards a performance based approach. To achieve these objectives DOE has (1) canceled DOE Order 5480.11, {open_quotes}Radiation Protection for DOE Workers,{close_quotes} DOE Order 5480.15, {open_quotes}Department of Energy Laboratory Accreditation Program (DOELAP) for Personnel Dosimetry,{close_quotes} and DOE Notice 5400.13, {open_quotes}Sealed Radioactive Source Accountability,{close_quotes} (2) converted the DOE Radiological Control (RadCon) Manual from mandatory to non mandatory status, and (3) issued DOE Notice 441.1 to maintain those requirements (not in 10 CFR 835) considered necessary for radiation protection of workers. DOE has initiated actions to (1) amend 10 CFR 835 (the Federal rule on occupational radiation protection in the DOE complex) to incorporate the requirements, or their equivalent, in DOE Notice 441.1, (2) issue a technical standard containing guidance on DOELAP, (3) reissue the DOE RadCon Manual as a non mandatory technical standard that reflects the amendments to 10 CFR 835, and (4) revise the implementation guides on radiation protection for consistency with 10 CFR 835 and the RadCon Manual. As a result of these modifications, the system of radiation protection in the DOE will become more comparable with the system of radiation protection used by commercial industry and with the system of protection applied to other areas of worker health and safety.

O`Connell, P.V.; Rabovsky, J.L.; Zobel, S.G. [Department of Energy, Germantown, MD (United States)

1996-06-01T23:59:59.000Z

189

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 11. CONTRACT ID CODE  

NLE Websites -- All DOE Office Websites (Extended Search)

I I PAGE OF PAGES 1 1 2 2. AMENDMENTIMODIFICATION NO. 3. EFFECTIVE DATE 4. REaUISITIONIPURCHASE REa. NO. 15. PROJECT NO. (If applicable) 335 See Block 16C 12SCOO0484 Item 7 6. ISSUED BY CODE 00518 7. ADMINISTERED 8Y (If other than Item 6) CODE 100518 Oak Ridge Oak Ridge U.S. Department of Energy U.S. Department of Energy P.O. Box 2001 P.O. Box 2001 Oak Ridge TN 37831 Oak Ridge TN 37831 8. NAME AND ADDRESS OF CONTRACTOR (No .* stroot. COlUlty. Stato and ZIP Code) (x) 9A. AMENDMENT OF SOLICITATION NO. f-'-- o AK RIDGE ASSOCIATED UNIVERSITIES, INC. P.O. BOX 117 98. DATED (SEE ITEM 11) o AK RIDGE TN 37830-6218 x 10A. MODIFICATION OF CONTRACTIORDER NO. DE-AC05-060R23100 108. DATED (SEE /TEM 13) CODE 041152224 FACILITY CODE 12/21/2005 11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

190

Effect of enzymatic modification on the film-forming properties of soy protein isolate  

E-Print Network (OSTI)

The effect of enzymatic treatment on the film-forming properties of soy protein isolate was studied using transglutaminase, alcalase, ?-chymotrypsin and pepsin. Reaction conditions were optimized by applying 2 concentrations of enzyme (E/S = 0.2 and 0.5%) at a constant concentration of substrate (5%, wt/wt) while controlling temperature and pH and by studying effect of various hydrolysis times (1, 5, 10, 20, 30 and 60 min). The hydrolysates were analyzed by determining the degree of hydrolysis and by studying sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) patterns. Film-forming solutions were made from each enzyme-treated sample containing 5% (wt/wt) protein and 3% (wt/wt) glycerol with final pH 9.0 ± 0.1. Transglutaminase-modified films had significantly (p 0.05). Modification of soy protein isolate by pepsin resulted in considerably decreased % elongation and tensile strength compared to other films. No significant (p > 0.05) differences in % elongation were found between alcalase and ?-chymotrypsin treatment.

Chae, Sung Hee

2002-01-01T23:59:59.000Z

191

TEMPEST code modifications and testing for erosion-resisting sludge simulations  

Science Conference Proceedings (OSTI)

The TEMPEST computer code has been used to address many waste retrieval operational and safety questions regarding waste mobilization, mixing, and gas retention. Because the amount of sludge retrieved from the tank is directly related to the sludge yield strength and the shear stress acting upon it, it is important to incorporate the sludge yield strength into simulations of erosion-resisting tank waste retrieval operations. This report describes current efforts to modify the TEMPEST code to simulate pump jet mixing of erosion-resisting tank wastes and the models used to test for erosion of waste sludge with yield strength. Test results for solid deposition and diluent/slurry jet injection into sludge layers in simplified tank conditions show that the modified TEMPEST code has a basic ability to simulate both the mobility and immobility of the sludges with yield strength. Further testing, modification, calibration, and verification of the sludge mobilization/immobilization model are planned using erosion data as they apply to waste tank sludges.

Onishi, Y.; Trent, D.S.

1998-01-01T23:59:59.000Z

192

Soybeans: Chemistry, Production, Processing, and UtilizationChapter 13 Soybean Oil Modification  

Science Conference Proceedings (OSTI)

Soybeans: Chemistry, Production, Processing, and Utilization Chapter 13 Soybean Oil Modification Food Science Health Nutrition Biochemistry Processing Soybeans eChapters Food Science & Technology Health - Nutrition - Biochemistry P

193

Evaluation of the Cask Transportation Facility Modifications (CTFM) compliance to DOE order 6430.1A  

SciTech Connect

This report was prepared to evaluate the compliance of Cask Transportation Facility Modifications (CTFM) to DOE Order 6430.1A.

ARD, K.E.

1999-07-14T23:59:59.000Z

194

I17: Surface Modification of Boron-doped Diamond with H2O Plasma  

Science Conference Proceedings (OSTI)

On the other hand, the wettability of diamond film surfaces can be altered by plasma exposure treatments. Investigation was carried on the surface modification ...

195

Development of novel gene therapy vectors via metabolic labeling and chemoselective modification of adenovirus capsid.  

E-Print Network (OSTI)

??Surface modification of adenovirus vectors can improve tissue selective targeting, attenuate immunogenicity, and enable imaging of particle biodistribution; thus significantly improving therapeutic potential. Currently, surface… (more)

Banerjee, Partha Sarathi

196

D0 Silicon Upgrade: End Calorimeter Transfer Bridge Modification  

Science Conference Proceedings (OSTI)

During the assembly of major components into the D0 Detector, a transfer bridge was required to move the North-End Calorimeter from the clean room,over the cable bridge and onto the north sidewalk of the assembly hall. This experiment is now at the beginning stages of the next phase, namely the upgrade of this Detector for future physics research. A major piece of this upgrade is the installation of a solenoid magnet into the Central Calorimeter. In order to accomplish this, the South End Calorimeter has to be removed from the detector and the North End Calorimeter must be moved an additional 20-inch from its nominal open position (total 60-inch movement). The South End Calorimeter will be removed from the detector using the equipment designed for its installation. The calorimeter will be staged on the south sidewalk during the installation of the solenoid magnet and the central tracking systems. The North End Calorimeter is moved 60-inch to give more space between calorimeters during magnet, tracker and cable installation work. This movement will allow the calorimeter to remain coupled to the cryo system. However, this movement requires an extension be added to the center beam. This extension will support the rear wheels of the calorimeter and in the case of the end calorimeters, carry the majority of the weight. The extension is to be a modification of the transfer bridge. This modification, basically has T1 steel blocks added to one end and legs to the sidewalk supports at the other. The T1 steel blocks are notched to fit into the center beam porches and are welded to bridge rails. This design is the same as that for the installation bridge (3740.312-ME-273456), including the welds and weld procedures which are identical in both cases. Since load testing is impractical, the critical welds will be non-destructive tested by ultrasonic means. The laboratory, through the FESS Department, has a contract with M.Q.S. Inspection Inc. The results of this testing will be submitted to the panel for review before the bridge is put into use. It is noted here, that M.Q.S. did perform an ultrasonic test on the critical welds of the EC-CC installation bridge on Oct. 2, 1990. That test demonstrated the weld penetrations between the T1 and A-36 materials. Copies were given to the committee at that time. A copy of the original North End Cap Calorimeter Installation Note is attached for reference.

Stredde, H.J.; /Fermilab

1996-07-10T23:59:59.000Z

197

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 5940 of 29,416 results. 31 - 5940 of 29,416 results. Download CX-005920: Categorical Exclusion Determination Clean and Secure Energy from Coal CX(s) Applied: B3.6 Date: 05/20/2011 Location(s): Provo, Utah Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-005920-categorical-exclusion-determination Download CX-005922: Categorical Exclusion Determination Clean and Secure Energy from Coal CX(s) Applied: B3.6 Date: 05/20/2011 Location(s): Salt Lake City, Utah Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-005922-categorical-exclusion-determination Download CX-005913: Categorical Exclusion Determination Hydrate Facility Modification to Operations CX(s) Applied: B3.6 Date: 05/19/2011 Location(s): Pittsburgh, Pennsylvania

198

Categorical Exclusion Determinations: Oregon | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 14, 2011 December 14, 2011 CX-007413: Categorical Exclusion Determination Transforming Photovoltaic Installations Toward Discpatchable, Schedulable Energy Solutions CX(s) Applied: A9, B3.6 Date: 12/14/2011 Location(s): Oregon Offices(s): Golden Field Office December 2, 2011 CX-007355: Categorical Exclusion Determination Modification of Metering Systems in Canby, Oregon CX(s) Applied: B1.7 Date: 12/02/2011 Location(s): Oregon Offices(s): Bonneville Power Administration December 2, 2011 CX-007354: Categorical Exclusion Determination Integration of the Farm Power Tillamook Generating Facility CX(s) Applied: B1.7 Date: 12/02/2011 Location(s): Oregon Offices(s): Bonneville Power Administration December 1, 2011 CX-007358: Categorical Exclusion Determination Integration of the University of Oregon's Cogeneration Project

199

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

15, 2012 15, 2012 CX-008946: Categorical Exclusion Determination Novel Supercritical Carbon Dioxide Power Cycle Utilizing Pressurized Oxy-Combustion in Conjunction... CX(s) Applied: A9 Date: 08/15/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory August 15, 2012 CX-008988: Categorical Exclusion Determination The Institute for Energy, Environment, and Sustainability CX(s) Applied: A9, B5.16 Date: 08/15/2012 Location(s): Kansas Offices(s): Golden Field Office August 15, 2012 CX-009115: Categorical Exclusion Determination Basin Modifications to Receive Research Fuel CX(s) Applied: B2.5 Date: 08/15/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 14, 2012 CX-008895: Categorical Exclusion Determination California-City-Yorba Linda

200

Categorical Exclusion Determinations: Idaho Operations Office | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 15, 2010 March 15, 2010 CX-001231: Categorical Exclusion Determination Test Reactor Area-653 Heating, Ventilation, Air Conditioning Modifications CX(s) Applied: B2.1, B2.5 Date: 03/15/2010 Location(s): Idaho Office(s): Idaho Operations Office, Nuclear Energy March 15, 2010 CX-001230: Categorical Exclusion Determination Replace 200,000 Gallon Water Storage Tank at Material Fuels Complex CX(s) Applied: B1.15 Date: 03/15/2010 Location(s): Idaho Office(s): Idaho Operations Office, Nuclear Energy March 11, 2010 CX-001229: Categorical Exclusion Determination Characterization of Fluidized Beds by Pressure Fluctuation Analysis CX(s) Applied: B3.6 Date: 03/11/2010 Location(s): Idaho Office(s): Idaho Operations Office, Nuclear Energy February 23, 2010 CX-000865: Categorical Exclusion Determination

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, 2010 6, 2010 CX-003164: Categorical Exclusion Determination Optimization of Biomass Production Across a Landscape CX(s) Applied: A9 Date: 07/26/2010 Location(s): South Dakota Office(s): Energy Efficiency and Renewable Energy, Golden Field Office July 26, 2010 CX-003162: Categorical Exclusion Determination City of Moore, Oklahoma Energy Efficiency and Conservation Block Grant Compressed Natural Gas Project Modification- Sanitation Truck Purchase CX(s) Applied: B5.1 Date: 07/26/2010 Location(s): Moore, Oklahoma Office(s): Energy Efficiency and Renewable Energy, Golden Field Office July 26, 2010 CX-003160: Categorical Exclusion Determination Controlled Environment Agriculture and Energy Project CX(s) Applied: B3.6, B5.1 Date: 07/26/2010 Location(s): New York Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

202

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 3, 2011 August 3, 2011 CX-006486: Categorical Exclusion Determination B-Press and Extruder Modification CX(s) Applied: A7, B1.3, B1.15, B1.16, B1.27, B1.31 Date: 08/03/2011 Location(s): Amarillo, Texas Office(s): Pantex Site Office August 3, 2011 CX-006452: Categorical Exclusion Determination Building 4 Mezzanine Renovation CX(s) Applied: B1.3, B2.3 Date: 08/03/2011 Location(s): Morgantown, West Virginia Office(s): Fossil Energy, National Energy Technology Laboratory August 2, 2011 CX-006632: Categorical Exclusion Determination 773-A, C-001 Roof Replacement Date: 08/02/2011 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office July 26, 2011 CX-006624: Categorical Exclusion Determination Pole Inspections For C- Area - By Sub-Contractor (L) CX(s) Applied: B1.3

203

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 20, 2011 May 20, 2011 CX-005965: Categorical Exclusion Determination Alvey District Wood Poles: Eugene-Lane Number 1, Eugene-Alvey Number 2, and Hawkins-Alvey Number 1 CX(s) Applied: B1.3 Date: 05/20/2011 Location(s): Lane County, Oregon Office(s): Bonneville Power Administration May 19, 2011 CX-006404: Categorical Exclusion Determination Install a Pressure Regulator and Relief Valve on the Tank 26 Flush Water Piping CX(s) Applied: B1.3 Date: 05/19/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office May 19, 2011 CX-006403: Categorical Exclusion Determination Enhanced Low Activity Waste Disposal Premix Silo Area Modifications CX(s) Applied: B1.3 Date: 05/19/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office

204

California | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4, 2010 4, 2010 CX-004010: Categorical Exclusion Determination Advanced Laser-Based Sensors for Industrial Process Control CX(s) Applied: B3.6, B5.1 Date: 09/14/2010 Location(s): Mountain View, California Office(s): Energy Efficiency and Renewable Energy September 14, 2010 CX-003819: Categorical Exclusion Determination Recovery Act: San Bernardino Associated Government Natural Gas Truck Project (Maintenance Building Modification) CX(s) Applied: B5.1 Date: 09/14/2010 Location(s): Orange, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory September 14, 2010 CX-003816: Categorical Exclusion Determination Recovery Act: San Bernardino Associated Government Natural Gas Truck Project CX(s) Applied: B5.1 Date: 09/14/2010 Location(s): Rancho Dominguez, California

205

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 24, 2011 May 24, 2011 CX-006398: Categorical Exclusion Determination Sidewalk Installation at 623-34G CX(s) Applied: B1.3 Date: 05/24/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office May 19, 2011 CX-006404: Categorical Exclusion Determination Install a Pressure Regulator and Relief Valve on the Tank 26 Flush Water Piping CX(s) Applied: B1.3 Date: 05/19/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office May 19, 2011 CX-006403: Categorical Exclusion Determination Enhanced Low Activity Waste Disposal Premix Silo Area Modifications CX(s) Applied: B1.3 Date: 05/19/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office

206

Categorical Exclusion Determinations: B1.23 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 17, 2012 September 17, 2012 CX-009371: Categorical Exclusion Determination Audio/Video Technology Refresh: PGH/MGN CX(s) Applied: B1.15, B1.23, B2.2 Date: 09/17/2012 Location(s): West Virginia, Pennsylvania Offices(s): National Energy Technology Laboratory September 17, 2012 CX-009173: Categorical Exclusion Determination Kansas-City-Olathe CX(s) Applied: A9, A11, B1.23, B5.1, B5.23 Date: 09/17/2012 Location(s): Kansas Offices(s): Energy Efficiency and Renewable Energy September 12, 2012 CX-009263: Categorical Exclusion Determination Design for High Performance Sustainable Building Modifications Based on E4 Report - PGH CX(s) Applied: B1.15, B1.23, B2.2 Date: 09/12/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory September 12, 2012 CX-009262: Categorical Exclusion Determination

207

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

01 - 1610 of 28,905 results. 01 - 1610 of 28,905 results. Download CX-007881: Categorical Exclusion Determination Solar Instructor Training Network - Midwest Provider CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Wisconsin Offices(s): Golden Field Office http://energy.gov/nepa/downloads/cx-007881-categorical-exclusion-determination Download CX-007911: Categorical Exclusion Determination South-Central Solar Instructor Training Network CX(s) Applied: A9, A11, B3.14 Date: 02/13/2012 Location(s): Texas Offices(s): Golden Field Office http://energy.gov/nepa/downloads/cx-007911-categorical-exclusion-determination Download CX-000605: Categorical Exclusion Determination Naselle Tap Modification Loop into Driscoll Substation CX(s) Applied: B4.6, B4.11 Date: 01/27/2010 Location(s): Clatsop County, Oregon

208

FE Categorical Exclusions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

15, 2010 15, 2010 CX-004238: Categorical Exclusion Determination Carbon Dioxide-Water Emulsions for Enhanced Oil Recovery and Permanent Sequestration of Carbon Dioxide CX(s) Applied: A1, A9, A11 Date: 10/15/2010 Location(s): Traverse City, Michigan Office(s): Fossil Energy, National Energy Technology Laboratory October 15, 2010 CX-004237: Categorical Exclusion Determination Carbon Dioxide-Water Emulsions For Enhanced Oil Recovery And Permanent Sequestration Of Carbon Dioxide CX(s) Applied: A9, A11, B3.6 Date: 10/15/2010 Location(s): Lowell, Massachusetts Office(s): Fossil Energy, National Energy Technology Laboratory October 14, 2010 CX-004246: Categorical Exclusion Determination Transport Reactor Development Unit Modification CX(s) Applied: B1.15, B3.6 Date: 10/14/2010

209

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 15240 of 28,905 results. 31 - 15240 of 28,905 results. Download CX-009594: Categorical Exclusion Determination Cathodic Protection Potential Stations at 292-S Diesel Fuel Oil Storage Tanks CX(s) Applied: B2.5 Date: 12/11/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-009594-categorical-exclusion-determination Download CX-009607: Categorical Exclusion Determination 772-F Low-Activity Drain (LAD) Discharge Header Modification CX(s) Applied: B1.3 Date: 11/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-009607-categorical-exclusion-determination Download CX-009608: Categorical Exclusion Determination Refurbish 607-53C Sanitary Sewer Lift Station CX(s) Applied: B1.3

210

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

24, 2011 24, 2011 CX-005319: Categorical Exclusion Determination Alternative Fuel/Advanced Vehicle Technology - City of Raleigh CX(s) Applied: A1, B5.1 Date: 02/24/2011 Location(s): Raleigh, North Carolina Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory February 24, 2011 CX-005318: Categorical Exclusion Determination Alternative Fuel/Advanced Vehicle Technology - North Carolina State University CX(s) Applied: A1, B5.1 Date: 02/24/2011 Location(s): North Carolina Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory February 24, 2011 CX-005317: Categorical Exclusion Determination University of Arkansas for Medical Sciences (UAMS), District Energy Service Modifications CX(s) Applied: A1, B5.1 Date: 02/24/2011

211

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 29, 2012 November 29, 2012 CX-009607: Categorical Exclusion Determination 772-F Low-Activity Drain (LAD) Discharge Header Modification CX(s) Applied: B1.3 Date: 11/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office November 29, 2012 CX-008651: Categorical Exclusion Determination Dismantle and Remove (D&R) and Replace 773-A D-Wing Air Handling and Condensing Units CX(s) Applied: B1.3 Date: 05/17/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office November 29, 2012 CX-009608: Categorical Exclusion Determination Refurbish 607-53C Sanitary Sewer Lift Station CX(s) Applied: B1.3 Date: 11/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office November 27, 2012 CX-009611: Categorical Exclusion Determination

212

Categorical Exclusion Determinations: A9 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 19, 2012 December 19, 2012 CX-009569: Categorical Exclusion Determination 2012 Illinois State Energy Program Formula Award - Modification CX(s) Applied: A9, A11, B5.1, B5.19 Date: 12/19/2012 Location(s): Illinois Offices(s): Golden Field Office December 19, 2012 CX-009553: Categorical Exclusion Determination Mild Biomass Liquefaction Process for Economic Production of Stabilized Refiner-Ready Bio-Oils CX(s) Applied: A9, B3.6 Date: 12/19/2012 Location(s): North Carolina, New Jersey Offices(s): Golden Field Office December 17, 2012 CX-009746: Categorical Exclusion Determination Upstream Ultrasonic Processing for Small Producers: Preventative Maintenance for Paraffin Management CX(s) Applied: A9, A11, B3.6 Date: 12/17/2012 Location(s): Washington Offices(s): National Energy Technology Laboratory

213

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 26150 of 31,917 results. 41 - 26150 of 31,917 results. Download CX-004097: Categorical Exclusion Determination Building 905 Battery Testing Facility Modifications CX(s) Applied: B3.6 Date: 09/01/2010 Location(s): New Mexico Office(s): Sandia Site Office http://energy.gov/nepa/downloads/cx-004097-categorical-exclusion-determination Download CX-004192: Categorical Exclusion Determination Site 9940 New Training Venue and Parking Lot Expansion CX(s) Applied: B1.15 Date: 06/25/2010 Location(s): New Mexico Office(s): Sandia Site Office http://energy.gov/nepa/downloads/cx-004192-categorical-exclusion-determination Download CX-004195: Categorical Exclusion Determination Terrestrial Tagging, Tracking and Locating CX(s) Applied: B3.11 Date: 06/14/2010 Location(s): Albuquerque, New Mexico Office(s): Sandia Site Office

214

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9, 2011 9, 2011 CX-006404: Categorical Exclusion Determination Install a Pressure Regulator and Relief Valve on the Tank 26 Flush Water Piping CX(s) Applied: B1.3 Date: 05/19/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office May 19, 2011 CX-006403: Categorical Exclusion Determination Enhanced Low Activity Waste Disposal Premix Silo Area Modifications CX(s) Applied: B1.3 Date: 05/19/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office May 19, 2011 CX-006402: Categorical Exclusion Determination 704-N Wireless Access CX(s) Applied: B1.3 Date: 05/19/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office May 19, 2011

215

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4, 2010 4, 2010 CX-003817: Categorical Exclusion Determination Appliance Technology Evaluation Center (ATEC)- Modification CX(s) Applied: B3.6 Date: 09/14/2010 Location(s): Morgantown, West Virginia Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory September 14, 2010 CX-003816: Categorical Exclusion Determination Recovery Act: San Bernardino Associated Government Natural Gas Truck Project CX(s) Applied: B5.1 Date: 09/14/2010 Location(s): Rancho Dominguez, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory September 14, 2010 CX-003815: Categorical Exclusion Determination Hardin County General Hospital Energy Efficiency Upgrades CX(s) Applied: B1.3, B2.2, B2.5, B5.1 Date: 09/14/2010 Location(s): Rosiclare, Illinois

216

Categorical Exclusion Determinations: Idaho | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 7, 2011 March 7, 2011 CX-005418: Categorical Exclusion Determination Birch Creek Radio Tower CX(s) Applied: B4.6 Date: 03/07/2011 Location(s): Bonneville County, Idaho Office(s): Bonneville Power Administration March 4, 2011 CX-005364: Categorical Exclusion Determination Idaho Completion Project Environmental and Regulatory Service Activities CX(s) Applied: B3.1 Date: 03/04/2011 Location(s): Idaho Office(s): Nuclear Energy, Idaho Operations Office January 31, 2011 CX-009402: Categorical Exclusion Determination Overpack Transfer Path Extension General Plant Project CX(s) Applied: B1.13 Date: 01/31/2011 Location(s): Idaho Offices(s): Naval Nuclear Propulsion Program January 27, 2011 CX-005186: Categorical Exclusion Determination Facility Construction and Modification in Support of the Material Security

217

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21 - 21630 of 31,917 results. 21 - 21630 of 31,917 results. Download CX-010289: Categorical Exclusion Determination Interstate Electrification Improvement CX(s) Applied: B5.1 Date: 05/03/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010289-categorical-exclusion-determination Download CX-010291: Categorical Exclusion Determination Interstate Electrification Improvement CX(s) Applied: B5.1 Date: 05/03/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010291-categorical-exclusion-determination Download CX-010292: Categorical Exclusion Determination Modification to the Petrography Laboratory CX(s) Applied: B2.3, B3.6 Date: 05/03/2013 Location(s): West Virginia Offices(s): National Energy Technology Laboratory

218

Categorical Exclusion Determinations: Fossil Energy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 28, 2011 September 28, 2011 CX-006966: Categorical Exclusion Determination Building 903 Renovation CX(s) Applied: B1.16, B1.29, B2.1, B2.2, B2.5 Date: 09/28/2011 Location(s): Pittsburgh, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory September 28, 2011 CX-006960: Categorical Exclusion Determination Building 83 Lab 242 Renovations as per Office of Research and Development Modifications CX(s) Applied: B1.29, B2.1, B2.2 Date: 09/28/2011 Location(s): Pittsburgh, Pennsylvania Office(s): Fossil Energy, Sandia Site Office September 26, 2011 CX-006973: Categorical Exclusion Determination Characterization of Most Promising Sequestration Formations in the Rocky Mountain Region CX(s) Applied: B3.1 Date: 09/26/2011 Location(s): Craig, Colorado Office(s): Fossil Energy, National Energy Technology Laboratory

219

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April 16, 2013 April 16, 2013 CX-010322: Categorical Exclusion Determination Research and Development Welding and Brazing Sample Preparation and Activities in Building 723-A CX(s) Applied: B3.6 Date: 04/16/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office April 16, 2013 CX-010321: Categorical Exclusion Determination Destructive Evaluation of Plutonium Storage Can Bundles CX(s) Applied: B3.6 Date: 04/16/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office April 16, 2013 CX-010320: Categorical Exclusion Determination Corrosion Testing in Aqueous Solutions CX(s) Applied: B3.6 Date: 04/16/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office April 15, 2013 CX-010324: Categorical Exclusion Determination 772-F Chase 174 Sprinkler Modification

220

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 18990 of 26,764 results. 81 - 18990 of 26,764 results. Download CX-001231: Categorical Exclusion Determination Test Reactor Area-653 Heating, Ventilation, Air Conditioning Modifications CX(s) Applied: B2.1, B2.5 Date: 03/15/2010 Location(s): Idaho Office(s): Idaho Operations Office, Nuclear Energy http://energy.gov/nepa/downloads/cx-001231-categorical-exclusion-determination Download CX-001181: Categorical Exclusion Determination Santiam Substation Renovation CX(s) Applied: B1.16 Date: 03/12/2010 Location(s): Linn County, Oregon Office(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-001181-categorical-exclusion-determination Download CX-005196: Categorical Exclusion Determination Biomass to Liquid Fuels and Electric Power Research CX(s) Applied: A9, B3.6 Date: 02/16/2011

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

FE Categorical Exclusions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4, 2010 4, 2010 CX-004215: Categorical Exclusion Determination Modifications to the Sanitary Sewer Line 920 Plateau CX(s) Applied: B1.3, B1.32, B2.1, B2.5 Date: 09/24/2010 Location(s): Pittsburgh, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory September 23, 2010 CX-003924: Categorical Exclusion Determination Delineation, Identification, Characterization, and Clean Up of Suspected Waste Area CX(s) Applied: B3.1, B6.1 Date: 09/23/2010 Location(s): Pittsburgh, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory September 23, 2010 CX-003921: Categorical Exclusion Determination Mobile Sediment Analysis Laboratory CX(s) Applied: B3.6 Date: 09/23/2010 Location(s): Morgantown, West Virginia Office(s): Fossil Energy, National Energy Technology Laboratory

222

Categorical Exclusion Determinations: Colorado | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 3, 2011 August 3, 2011 CX-006441: Categorical Exclusion Determination Colorado State Energy Program, American Recovery and Reinvestment Act - City of Aspen, Geothermal Power Feasibility Study CX(s) Applied: A9, A11, B3.1 Date: 08/03/2011 Location(s): Aspen, Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office July 27, 2011 CX-006297: Categorical Exclusion Determination Colorado-City-Fort Collins CX(s) Applied: A1, A9, B1.32, B2.5, B3.6, B5.1 Date: 07/27/2011 Location(s): Fort Collins, Colorado Office(s): Energy Efficiency and Renewable Energy July 26, 2011 CX-006289: Categorical Exclusion Determination Willow Creek Substation -Transformer Replacement and Substation Modifications CX(s) Applied: B4.6 Date: 07/26/2011 Location(s): Grand County, Colorado

223

Categorical Exclusion Determinations: Environmental Management | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determinations: Environmental Management Categorical Exclusion Determinations issued by Environmental Management. DOCUMENTS AVAILABLE FOR DOWNLOAD October 13, 2011 CX-006923: Categorical Exclusion Determination Design and Install a Modification to the HB-Line Exhaust Fan Dampers CX(s) Applied: B2.5 Date: 10/13/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management October 13, 2011 CX-006920: Categorical Exclusion Determination Install Drain Sink in Room 141, Building 735-11A CX(s) Applied: B3.6 Date: 10/13/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, National Energy Technology Laboratory October 12, 2011 CX-006927: Categorical Exclusion Determination H1616 O-Ring Aging Studies CX(s) Applied: B3.6

224

Applied Science and Technology Task Order Fiscal Year 2009 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

09 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2009 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2009 Year-End...

225

Applied Science and Technology Task Order Fiscal Year 2010 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2010 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2010 Year-End...

226

Applied Science and Technology Task Order Fiscal Year 2011 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2011 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2011 Year-End...

227

Applied Science and Technology Task Order Fiscal Year 2008 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2008 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2008 Year-End...

228

Proceedings of the 2011 ACM Symposium on Applied Computing  

Science Conference Proceedings (OSTI)

Welcome to the 26th International Symposium on Applied Computing (SAC 2011). For the past 25 years, SAC has become a major international venue for computing researchers and applied practitioners to convene and share ideas on recent developments in a ...

William Chu; W. Eric Wong; Mathew J. Palakal; Chih-Cheng Hung

2011-03-01T23:59:59.000Z

229

Proceedings of the 2010 ACM Symposium on Applied Computing  

Science Conference Proceedings (OSTI)

Welcome to the 25th International Symposium on Applied Computing (SAC 2010). For the past 24 years, SAC has become a major international venue for computing researchers and applied practitioners to convene and share ideas on recent developments in a ...

Sung Y. Shin; Sascha Ossowski; Michael Schumacher; Mathew J. Palakal; Chih-Cheng Hung

2010-03-01T23:59:59.000Z

230

DOE - Office of Legacy Management -- Case School of Applied Science...  

Office of Legacy Management (LM)

Case School of Applied Science Ohio State University - OH 0-01 FUSRAP Considered Sites Site: Case School of Applied Science, Ohio State University (OH.0-01 ) Eliminated from...

231

Roadmap: Applied Engineering Manufacturing Systems Bachelor of Science  

E-Print Network (OSTI)

Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT 15000 Introduction to Human Communication 3 Fulfills Kent Core Additional Kent Core Requirement 3 See #12;Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT

Sheridan, Scott

232

Open Solicitations and How to Apply: the Loan Guarantee Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Open Solicitations and How to Apply: the Loan Guarantee Program Invites You to a Free Webinar Open Solicitations and How to Apply: the Loan Guarantee Program Invites You to a Free...

233

Modification of the algorithm for beat tracking of a musical melody  

Science Conference Proceedings (OSTI)

A new efficient modification of the known heuristic algorithm for real-time beat tracking is proposed. An improved formula for updating the relative frequencies of time intervals between adjacent onsets is used in the modification. The algorithm has ... Keywords: beat tracking, note attack, onset detection

M. Yu. Khachai; K. S. Kobylkin; D. M. Khachai

2013-03-01T23:59:59.000Z

234

PLZT NANO PRE URSORS FOR HIGH ENERGY DENSITY APPLI ATIONS  

APPLI ATIONS & INDUSTRIES ENEFITS Pulsed Power Oil Exploration Capacitors Refer to SD # 12119 Thermistors Transducers Military & Defense Automotive

235

Dixson and Fu Receive NIST Applied Research Award  

Science Conference Proceedings (OSTI)

Dixson and Fu Receive NIST Applied Research Award. For Immediate Release: December 1, 1999. *. Bookmark and Share. ...

2013-07-19T23:59:59.000Z

236

Materials Research Applied to National Needs (MARANN) in Honor ...  

Science Conference Proceedings (OSTI)

Jul 31, 2012 ... About this Symposium. Meeting, 2013 TMS Annual Meeting & Exhibition. Symposium, Materials Research Applied to National Needs ...

237

PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING 1 ADVISER: Immersive Scientific Visualization Applied  

E-Print Network (OSTI)

be applied to the terrain (Figure 2b). A custom pixel shader was integrated with ROAM to render the dynamic

Head III, James William

238

Role of ponderomotive density modification in IBW loading  

SciTech Connect

We solve numerically a second-order nonlinear ordinary differential equation [1] that describes EPW-IBW mode transformation at the lower-hybrid layer, including self-consistent ponderomotive density profile modification, for the electrostatic potential in front of the IBW antenna. The model is solved for the particular case of heating just below the second harmonic of the deuterium cyclotron frequency. Background density and temperature profiles are chosen to be appropriate for the IBW experiments on TFTR. We calculate the complex antenna impedance, assuming vacuum within the antenna box, and a local reflectivity which reveal diminished antenna loading with increasing ponderomotive pressure, compared to the linear prediction. The ponderomotive force steepens the density gradient in the edge plasma, thus enhancing reflection and lowering the loading resistance. The model also describes the direct launch of IBWs in high edge density regimes, lacking a lower-hybrid layer, where the impedance is found to be much smaller than in the low density regime. {copyright} {ital 1997 American Institute of Physics.}

Russell, D.A.; Myra, J.R.; DIppolito, D.A. [Lodestar Research Corp., 2400 Central Ave. P-5, Boulder, Colorado 80301 (United States)

1997-04-01T23:59:59.000Z

239

Medium Modifications of Hadron Properties and Partonic Processes  

Science Conference Proceedings (OSTI)

Chiral symmetry is one of the most fundamental symmetries in QCD. It is closely connected to hadron properties in the nuclear medium via the reduction of the quark condensate , manifesting the partial restoration of chiral symmetry. To better understand this important issue, a number of Jefferson Lab experiments over the past decade have focused on understanding properties of mesons and nucleons in the nuclear medium, often benefiting from the high polarization and luminosity of the CEBAF accelerator. In particular, a novel, accurate, polarization transfer measurement technique revealed for the first time a strong indication that the bound proton electromagnetic form factors in 4He may be modified compared to those in the vacuum. Second, the photoproduction of vector mesons on various nuclei has been measured via their decay to e+e- to study possible in-medium effects on the properties of the rho meson. In this experiment, no significant mass shift and some broadening consistent with expected collisional broadening for the rho meson has been observed, providing tight constraints on model calculations. Finally, processes involving in-medium parton propagation have been studied. The medium modifications of the quark fragmentation functions have been extracted with much higher statistical accuracy than previously possible.

W. K. Brooks, S. Strauch, K. Tsushima

2011-06-01T23:59:59.000Z

240

Staff Analysis of Proposed Modifications to Upgrade Three Combustion  

E-Print Network (OSTI)

Procter and Gamble Cogeneration Project. Staff prepared an analysis of this proposed change, and a copy is enclosed for your information and review. The Procter and Gamble project is a 164 MW cogeneration power plant located in the City of Sacramento in Sacramento County. The project was certified by the Energy Commission on November 16, 1994, and began commercial operation in 1996. The proposed modifications will allow SCA to upgrade the two LM6000PA combustion turbines to LM6000PCs. Additionally, Spray Intercooled Turbine and Enhanced Flow and Speed (Sprint/EFS) technology will be added to all three turbines. These upgrades are anticipated to lower the combustion turbines ’ air pollutant emissions and raise thermal efficiency. Overall facility output is expected to increase by 22 MW (nominal). Energy Commission staff reviewed the petition and assessed the impacts of this proposal on environmental quality, public health and safety, and proposes revisions to seven conditions of certification: AQ-10 through AQ-14, AQ-16, and AQ-39. In addition, AQ-15 would be deleted, and AQ-50 through AQ-51 added to the current conditions of certification. Three analyses were prepared by technical staff, and are attached to this

Paula David

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Radwaste assessment program for nuclear station modifications by design engineering  

SciTech Connect

Radwaste burial for Duke Power Company's (DPC's) seven nuclear units has become a complicated and costly process. Burial costs are based on overall volume, surcharges for radioactivity content and weight of containers, truck and cask rental, driver fees, and state fees and taxes. Frequently, radwaste costs can be as high as $500 per drum. Additionally, DPC is limited on the total burial space allocated for each plant each year. The thrust of this program is to reduce radwaste volumes needing burial at either Barnwell, South Carolina, or Richland, Washington. A limited number of options are available at our sites: (a) minimization of radwaste volume production, (b) segregation of contamination and noncontaminated trash, (c) decontamination of small hardware, (d) volume reduction of compatible trash, (e) incineration of combustible trash (available at Oconee in near future), and (f) burial of below-regulatory-concern very low level waste on site. Frequently, costs can be reduced by contracting services outside the company, i.e., supercompaction, decontamination, etc. Information about radwaste volumes, activities, and weight, however, must be provided to the nuclear production department (NPD) radwaste group early in the nuclear station modification (NSM) process to determine the most cost-effective method of processing radwaste. In addition, NSM radwaste costs are needed for the NPD NSM project budget. Due to the advanced planning scope of this budget, NSM construction costs must be estimated during the design-phase proposal.

Eble, R.G.

1988-01-01T23:59:59.000Z

242

Modification of radiation damage in rat spinal cord by mitotane  

SciTech Connect

Modification of the paralytic response in rats after 6-MV photon irradiation of the spinal cord with either single or split exposures (two equal fractions given in a 24-hour period) by mitotane was investigated. Mitotane was administered as a suspension in physiologic saline (300 mg/kg/day) for either 5 days prior to or 5 days after irradiation. For rats receiving split doses of 6-MV photons, either the last two doses of mitotane were given 2 hours prior to each radiation fraction or mitotane was begun 2 hours after the second fraction and continued for 5 days. The data to 6 months after irradiation indicate that, in rats given mitotane for 5 days prior to single-dose photon irradiation, the paralytic response (as defined by the dose needed to produce paralysis in 50% of the irradiated groups of rats) was enhanced by a dose-enhancement factor (DEF) of 1.40. The DEF in the group of rats given mitotane after single doses of 6-MV photons was 1.15. In the split-dose irradiation experiments, the DEF for the groups of rats given mitotane prior to each radiation fraction was 1.36; while the DEF for the group of rats receiving mitotane beginning after the second fraction was 1.18. These data indicate that mitotane can potentiate the effects of 6-MV photon irradiation to the central nervous system, with mitotane administered prior to irradiation being the most effective sequence.

Glicksman, A.S.; Bliven, S.F.; Leith, J.T.

1982-07-01T23:59:59.000Z

243

ISHED1: Applying the LEM Methodology to Heat Exchanger Design  

E-Print Network (OSTI)

ISHED1: Applying the LEM Methodology to Heat Exchanger Design Kenneth A. Kaufman Ryszard S. Michalski MLI 00-2 #12;2 ISHED1: APPLYING THE LEM METHODOLOGY TO HEAT EXCHANGER DESIGN Kenneth A. Kaufman-2 January 2000 #12;ISHED1: APPLYING THE LEM METHODOLOGY TO HEAT EXCHANGER DESIGN Abstract Evolutionary

Michalski, Ryszard S.

244

DOE Awards Task Order Modification for Support Services to Office of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Modification for Support Services to Office Modification for Support Services to Office of Environmental Management DOE Awards Task Order Modification for Support Services to Office of Environmental Management March 11, 2013 - 12:00pm Addthis Media Contact Lynette Chafin, 513-246-0461 Lynette.Chafin@emcbc.doe.gov Cincinnati - The Department of Energy (DOE) today awarded a modification to Task Order DE-DT0005235 to J.G. Management Systems, Inc. of Grand Junction, CO for administrative and program analytical support for the Office of Environmental Management. The task order was awarded under Indefinite Delivery/Indefinite Quantity (ID/IQ) Master Contract. The modification is valued at approximately $3.1M over three years including a one-year base period and two one-year option periods. J.G. Management Systems, Inc. is a small-disadvantaged business

245

Applying Innovation System Concept in Agricultural Research for  

Open Energy Info (EERE)

Applying Innovation System Concept in Agricultural Research for Applying Innovation System Concept in Agricultural Research for Development: A learning module Jump to: navigation, search Tool Summary Name: Applying Innovation System Concept in Agricultural Research for Development: A learning module Agency/Company /Organization: International Livestock Research Institute Sector: Land Focus Area: Agriculture Topics: Policies/deployment programs Resource Type: Training materials Website: mahider.ilri.org/bitstream/10568/167/1/Innovation_System_Agric_LM.pdf Applying Innovation System Concept in Agricultural Research for Development: A learning module Screenshot References: Applying Innovation System Concept in Agricultural Research for Development: A learning module[1] Preface "Sustained agricultural growth requires, among others, increased

246

Vehicle Technologies Office: Lightweight Materials Long-Term Applied  

NLE Websites -- All DOE Office Websites (Extended Search)

Long-Term Applied Research: Magnesium and Carbon Fiber to someone by E-mail Long-Term Applied Research: Magnesium and Carbon Fiber to someone by E-mail Share Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Facebook Tweet about Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Twitter Bookmark Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Google Bookmark Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Delicious Rank Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Digg Find More places to share Vehicle Technologies Office: Lightweight

247

Surface charging, discharging and chemical modification at a sliding contact  

Science Conference Proceedings (OSTI)

Electrostatic charging, discharging, and consequent surface modification induced by sliding dissimilar surfaces have been studied. The surface-charge related phenomena were monitored by using a home-built capacitive, non-contact electrical probe, and the surface chemistry was studied by X-ray photoelectron spectroscopy (XPS). The experiments were performed on the disk surface of a ball-on-rotating-disk apparatus; using a glass disk and a Teflon (polytetrafluoroethylene) ball arrangement, and a polyester disks and a diamondlike carbon (DLC) coated steel ball arrangement. The capacitive probe is designed to perform highly resolved measurements, which is sensitive to relative change in charge density on the probed surface. For glass and Teflon arrangement, electrical measurements show that the ball track acquires non-uniform charging. Here not only the increase in charge density, but interestingly, increase in number of highly charged regions on the ball track was resolved. Threefold increase in the number of such highly charged regions per cycle was detected immediately before the gas breakdown-like incidences compared to that of other charge/discharge incidences at a fixed disk rotation speed. We are also able to comment on the behavior and the charge decay time in the ambient air-like condition, once the sliding contact is discontinued. XPS analysis showed a marginal deoxidation effect on the polyester disks due to the charging and discharging of the surfaces. Moreover, these XPS results clearly indicate that the wear and friction (sliding without charging) on the surface can be discarded from inducing such a deoxidation effect.

Singh, S. V.; Kusano, Y. [Department of Wind Energy, Section of Composites and Materials Mechanics, Technical University of Denmark, Risoe Campus, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Morgen, P. [Department of Physics, Chemistry and Pharmacy, University of Southern Denmark, DK-5230 Odense (Denmark); Michelsen, P. K. [Department of Physics, Technical University of Denmark, P.O. Box 49, DK-4000 Roskilde (Denmark)

2012-04-15T23:59:59.000Z

248

How to Apply for an SES Position | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply for an SES Position How to Apply for an SES Position How to Apply for an SES Position The Senior Executive Service (SES) is an elite group of men and women meeting the highest professional standards who administer public programs at the top levels of the Federal government. SES employees' salaries are linked directly to individual performance. The U.S. Office of Personnel Management's (OPM) SES web page contains a host of information that may be benefical to you. To apply for current SES positions within the Federal Government, including the Department of Energy please visit the Office of Personnel Management's USAJOBS site. From this site, you may view, download and apply for vacancies of interest to you. DOE does not accept unsolicited resumes. You must apply to a specific

249

Apply for Our Jobs | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Apply for Our Jobs | National Nuclear Security Administration Apply for Our Jobs | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Apply for Our Jobs Home > Federal Employment > Apply for Our Jobs Apply for Our Jobs Whether you're a student seeking to learn more about a future career, just starting out, at mid-career or an experienced executive, NNSA may have the

250

Apply for Our Jobs | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply for Our Jobs | National Nuclear Security Administration Apply for Our Jobs | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Apply for Our Jobs Home > Federal Employment > Apply for Our Jobs Apply for Our Jobs Whether you're a student seeking to learn more about a future career, just starting out, at mid-career or an experienced executive, NNSA may have the

251

Software Architecture for Simultaneous Process Control and Software Development/Modification  

SciTech Connect

A software architecture is described that allows modification of some application code sections while the remainder of the application continues executing. This architecture facilitates long term testing and process control because the overall process need not be stopped and restarted to allow modifications or additions to the software. A working implementation using National Instruments LabVIEW{trademark} sub-panel and shared variable features is described as an example. This architecture provides several benefits in both the program development and execution environments. The software is easier to maintain and it is not necessary to recompile the entire program after a modification.

Lenarduzzi, Roberto [ORNL; Hileman, Michael S [ORNL; McMillan, David E [ORNL; Holmes Jr, William [ORNL; Blankenship, Mark [USEC; Wilder, Terry [USEC

2011-01-01T23:59:59.000Z

252

Challenges in Applying Diamond Coatings to Carbide Twist Drills  

Science Conference Proceedings (OSTI)

Despite of the attractive advantage of applying diamond coating to drills, ... Investigation of a Hybrid Cutting Tool Design for Shearing Operations of Sheet Metals.

253

NREL: Technology Transfer - Apply Now for Energy-Efficient Housing ...  

Apply Now for Energy-Efficient Housing ... and NREL's Residential Buildings Research Web site to learn about systems integration and energy analysis ...

254

1 SCRA Applied Research & Development offers the following ...  

Science Conference Proceedings (OSTI)

... and the rapid transition of results into US ... the Way (PLTW); National Science Foundation initiatives ... 6 SCRA Applied R&D 5300 International Blvd N ...

2012-10-26T23:59:59.000Z

255

Applied Process Engineering Laborotory APEL | Open Energy Information  

Open Energy Info (EERE)

Engineering Laborotory APEL Jump to: navigation, search Name Applied Process Engineering Laborotory (APEL) Place United States Sector Services Product General Financial & Legal...

256

Applied Mathematics and Plasma Physics, T-5: Theoretical, T:...  

NLE Websites -- All DOE Office Websites (Extended Search)

Pieter Swart Deputy Group Leader Kim Rasmussen Administration Charlotte Lehman Office Location TA-3, Bldg 508, Rm 204 Applied Mathematics and Plasma Physics, T-5 The group...

257

Mark Linne Dept. Applied Mechanics, Chalmers University, Gothenburg...  

NLE Websites -- All DOE Office Websites (Extended Search)

Optical and X-ray Measurements for Fuel Sprays Mark Linne Dept. Applied Mechanics, Chalmers University, Gothenburg, 41296, Sweden This talk will describe measurement needs across...

258

An improved Benders decomposition applied to a multi-layer ...  

E-Print Network (OSTI)

GLOBECOM 2007, Washington DC, USA, December 2007. [8] A. M. Costa, A survey on benders decomposition applied to fixed-charge network design ...

259

Infrared Imagery Applied to A Large Buoyant Plume  

Science Conference Proceedings (OSTI)

The possibility of applying infrared imagery to the study of a large, hot plume materialized by carbon particles resulting from the incomplete combustion of fuel oil is investigated.

J-M. Brustet; B. Benech; P. Waldteufel

1981-05-01T23:59:59.000Z

260

Steel Research Applied to National Needs - A Company Perspective  

Science Conference Proceedings (OSTI)

Symposium, Materials Research Applied to National Needs (MARANN) in Honor of ... food packaging, transportation (auto, rail, and air), etc, to name just a few.

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Geothermal: Sponsored by OSTI -- Extracting and Applying SV-SV...  

Office of Scientific and Technical Information (OSTI)

Extracting and Applying SV-SV Shear Modes from Vertical Vibrator Data Across Geothermal Prospects Final Report Geothermal Technologies Legacy Collection HelpFAQ | Site Map |...

262

Lagrangean Duality Applied on Vehicle Routing with Time Windows  

E-Print Network (OSTI)

Nov 6, 2001 ... Lagrangean Duality Applied on Vehicle Routing with Time Windows ... with the Vehicle Routing Problem with Time Windows (VRPTW).

263

Los Alamos Lab: International and Applied Technology Division...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Electromagnetics, IAT-2 IAT-2 is a broad spectrum electromagnetics applications organization whose research and development activities address the Global Security...

264

How to Apply for NIST, Department of Commerce, and Other ...  

Science Conference Proceedings (OSTI)

... Search for Job Vacancies: Vacancy announcements contain important information that applicants need to know to apply for a specific job opening ...

2013-08-09T23:59:59.000Z

265

Modular Systems Biology applied to TGFbeta and DNA Damage Response...  

NLE Websites -- All DOE Office Websites (Extended Search)

Modular Systems Biology applied to TGFbeta and DNA Damage Response Signaling following Low Dose Radiation Francis Cucinotta NASA Johnson Space Center Abstract Modular systems...

266

Comment re DOE's NOI re continuation or modification of Price-Anderson Act  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

re DOE's NOI re continuation or modification of re DOE's NOI re continuation or modification of Price-Anderson Act Comment re DOE's NOI re continuation or modification of Price-Anderson Act Comments of Kerr-McGee Corporation to the "Notice of Inquiry" by DOE seeking comments to assist in the preparation of a report to Congress concerning the continuation or modification of the Price-Anderson Act (the "Act"). These comments will focus solely on question 25 of the notice -- namely, whether the procedures in the Act governing administrative and judicial proceedings should be modified. 62 Fed. Reg. at 68,277. As you will see, we urge the amendment of the Act to implement Congress' goal of assuring a federal forum for any public liability action arising out of a nuclear incident that is presented to any court within the United States,

267

Major Modification Determination Process Utilized for Proposed Idaho National Laboratory Projects  

Science Conference Proceedings (OSTI)

Over the past three years, several new projects with the potential for major modifications to existing facilities have been considered for implementation at the Idaho National Laboratory (INL). These projects were designated to take place in existing nuclear facilities with existing documented safety analyses. 10 CFR 830.206 requires the contractor for a major modification to a Hazard Category 1, 2, or 3 nuclear facility to obtain Department of Energy (DOE) approval for the nuclear facility design criteria to be used for preparation of a preliminary documented safety analysis (PDSA), as well as creation and approval of the PDSA, before the contractor can procure materials or components or begin construction on the project. Given the significant effort and expense of preparation and approval of a PDSA, a major modification determination for new projects is warranted to determine if the rigorous requirements of a major modification are actually required. Furthermore, performing a major modification determination helps to ensure that important safety aspects of a project are appropriately considered prior to modification construction or equipment procurement. The projects considered for major modification status at the INL included: treatment and packaging of unirradiated, sodium-bonded highly enriched uranium (HEU) fuel and miscellaneous casting scrap in the Materials and Fuels Complex (MFC) Fuel Manufacturing Facility (FMF); post irradiation examination of Advance Fuel Cycle Initiative (AFCI) fuel in the MFC Analytical Laboratory (AL); the Advanced Test Reactor (ATR) gas test loop (GTL); and the hydraulic shuttle irradiation system (HSIS) at ATR. The major modification determinations for three of the proposed projects resulted in a negative major modification. On the other hand, the major modification determination for the GTL project concluded that the project would require a major modification. This paper discusses the process, methods, and considerations used by the INL for the four major modification determinations. Three of the four major modification determinations discussed herein were completed using the guidance specified in the draft of DOE STD-1189, “Integration of Safety into the Design Process.” DOE-STD-1189 was released as a draft document in March 2007 and provides guidance for integrating safety considerations into the early design activities for constructing new facilities or making modifications to existing nuclear facilities. The fourth major modification determination was prepared prior to the existence of DOE STD-1189 and was evaluated solely by the definition of a major modification given in 10 CFR 830.206. For all four projects, consideration was given to: • Facility hazard categorization change and material inventory • Facility footprint change with the potential to adversely affect credited safety function • New or changed processes resulting in a change to the safety basis • The use of new technology or equipment not approved for use in the facility • The need for new or revised safety basis controls • Hazards not previously evaluated in the safety basis.

Michael A. Lehto, Ph.D.; Boyd D. Christensen

2008-05-01T23:59:59.000Z

268

FINAL DETERMINATION, CLASS 2 MODIFICATION REQUEST WIPP HAZARDOUS WASTE FACILITY PERMIT  

E-Print Network (OSTI)

Dear Dr. Moody and Mr. Sharif: The New Mexico Environment Department (NMED) hereby approves with changes the permit modification request (PMR) to the WIPP Hazardous Waste Facility Permit as submitted to the Hazardous Waste Bureau in the following document:

Bill Richardson; Diane Denish; Ron Curry; Sarah Cottrell; David Moody Manager; Farok Sharif

2010-01-01T23:59:59.000Z

269

Evaluating winter orographic cloud seeding: Design of the Wyoming Weather Modification Pilot Project (WWMPP)  

Science Conference Proceedings (OSTI)

An overview of the Wyoming Weather Modification Pilot Project (WWMPP) is presented. This project, funded by the State of Wyoming, is designed to evaluate the effectiveness of cloud seeding with silver iodide in the Medicine Bow and Sierra Madre ...

Daniel Breed; Roy Rasmussen; Courtney Weeks; Bruce Boe; Terry Deshler

270

Modification date 12 February 2013 22:43:16 | Open Energy Information  

Open Energy Info (EERE)

have property "Modification dateThis property is a special property in this wiki." with value "12 February 2013 22:43:16". Since there have been only a few results, also nearby...

271

Modification date 10 December 2012 20:23:32 | Open Energy Information  

Open Energy Info (EERE)

have property "Modification dateThis property is a special property in this wiki." with value "10 December 2012 20:23:32". Since there have been only a few results, also nearby...

272

In-Medium Modifications of Scalar Charm Mesons in Nuclear Matter  

E-Print Network (OSTI)

Employing QCD sum rules the in-medium modifications of scalar charm mesons in a cold nuclear matter environment are estimated. The mass splitting of D*-D*-bar is quantified.

Hilger, Thomas

2010-01-01T23:59:59.000Z

273

On the Modification Potential of Illinois Summertime Convective Clouds, with Comparisons to Florida and FACE Observations  

Science Conference Proceedings (OSTI)

The potential for enhancing rain output over central Illinois through modification of summertime convective clouds was investigated by use of model predictions of cumulus growth, as well as direct, internal measurements of cloud physical ...

Victor Wiggert; Robert I. Sax; Ronald L. Holle

1982-09-01T23:59:59.000Z

274

Fats and Oils Handbook (Nahrungsfette und Öle)Chapter 6 Modification of Fats and Oils  

Science Conference Proceedings (OSTI)

Fats and Oils Handbook (Nahrungsfette und Öle) Chapter 6 Modification of Fats and Oils Food Science Health Nutrition Biochemistry eChapters Food Science & Technology Health - Nutrition - Biochemistry Press Downloadable

275

Modification Research of Si3N4-SiC Heat Absorption Ceramic ...  

Science Conference Proceedings (OSTI)

Presentation Title, Modification Research of Si3N4-SiC Heat Absorption Ceramic Material Used for Tower Type Solar Thermal Power Plant. Author(s), Meng Liu, ...

276

Great Plains Coal Gasification Plant start-up and modification report. [Lurgi Process  

SciTech Connect

This report will help in designing future coal conversion plants by documenting the areas which need additional research to obtain more reliable process data, more careful planning and equipment selection. The scope of this report is to: describe the problem with the particular process or item of equipment; identify the modification that was implemented to correct the problem; evaluate the impacts of the modification; and document the cost of the modification. Contents include the following: (1) process modifications (coal, oxygen and steam, gasification and gas processing, sulfur recovery, flare system, liquid processing, ash handling and solids disposal, other systems); (2) start-up schedule; (3) SNG production; (4) environmental data; and (5) cost data.

Miller, W.R.; Honea, F.I.; Lang, R.A.; Berty, T.E.; Delaney, R.C.; Hospodarec, R.W.; Mako, P.F.

1986-03-01T23:59:59.000Z

277

Contract DE-AC04-94AL85000 Modification M508  

National Nuclear Security Administration (NNSA)

Modification M508 Attachment 1 SECTION J APPENDIX C Special Bank Account Agreement (Updated Mod M271, M461, M497, M508) Intentionally left blank for Internet posting purposes....

278

Experimentation Involving Controversial Scientific and Technological Issues: Weather Modification as a Case Illustration  

Science Conference Proceedings (OSTI)

The development of weather modification requires resolution of a number of scientific questions. To resolve them necessitates field experiments that frequently extend over many years and cost millions of dollars. These projects usually are highly ...

Stanley A. Changnon; W. Henry Lambright

1990-03-01T23:59:59.000Z

279

AMENDMENT OF SOLIC ITATION/MODIFICATION OF CONTRACT 11. CONTRACT ID CODE  

E-Print Network (OSTI)

Modification M840 SF-30 Continuation Page Page4 of4 Special Access Program Policies, Responsibilities INDEPENDENT OVERSIGHT AND PERFORMANCE ASSURANCE PROGRAM GRADED SECURITY PROTECTION (GPS) POLICY MATERIAL CONTROL AND ACCOUNTABILITY COUNTERINTELLIGENCE PROGRAM IDENTIFYING CLASSIFIED INFORMATION

280

Simulated Urban Climate Response to Modifications in Surface Albedo and Vegetative Cover  

Science Conference Proceedings (OSTI)

Three-dimensional meteorological simulations have been conducted to investigate the potential impact of urban surface characteristic modifications on local climate. Results for a base case simulation for the Los Angeles basin are compared to ...

David J. Sailor

1995-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Modifications To Incorporate Competitive Electricity Prices In The Annual Energy Outlook 1998  

Reports and Publications (EIA)

The purpose of this report is to describe modifications to the Electricity Market Module (EMM) for the Annual Energy Outlook 1998. It describes revisions necessary to derive competitive electricity prices and the corresponding reserve margins.

Information Center

1998-02-01T23:59:59.000Z

282

Raingage Network Requirements from a Simulated Convective Complex Weather Modification Experiment  

Science Conference Proceedings (OSTI)

A convective complex weather modification experiment was simulated using Monte Carlo techniques. The purpose was to estimate the optimum raingage density for evaluation of a possible future experiment. The data base consisted of radar volume ...

James A. Heimbach Jr.; Arlin B. Super

1980-10-01T23:59:59.000Z

283

Modification of a Commercial Condensation Particle Counter for Boundary Layer Balloon-Borne Aerosol Studies  

Science Conference Proceedings (OSTI)

A commercial battery-driven condensation particle counter (TSI-8020) was modified for use in a lightweight payload for tethered balloons to study new particle formation in the planetary boundary layer. After modifications, the instrument was ...

Jost Heintzenberg; Alfred Wiedensohler; Stefan Kütz

1999-05-01T23:59:59.000Z

284

Olive Oil: Chemistry and Technology, 2nd EditionChapter 10 Treatments and Modifications  

Science Conference Proceedings (OSTI)

Olive Oil: Chemistry and Technology, 2nd Edition Chapter 10 Treatments and Modifications Food Science Health Nutrition Biochemistry Processing eChapters Food Science & Technology Health - Nutrition - Biochemistry Processing 9F826247

285

Weather Modification from Cooling Towers: A Test Based on the Distributional Properties of Rainfall  

Science Conference Proceedings (OSTI)

A statistical technique for the treatment of data from weather modification experiments is presented. This work, a part of the Meteorological Effects of Thermal Energy Releases (METER) Program, is aimed at determining the potential precipitation ...

A. A. N. Patrinos; K. O. Bowman

1980-03-01T23:59:59.000Z

286

Investigating the Function of the Preinitiation Complex and the Consequences of Chromatin Modifications   

E-Print Network (OSTI)

H3K4me3  and  H3K27me3  chromatin  modifications  recruit Molecular biology.  Chromatin higher order folding??Workman,  The  Role  of  Chromatin  during  Transcription.  

Lehmann, Lynn Wayne

2013-01-01T23:59:59.000Z

287

Nuclear Plant Design and Modification Guidelines for PWR Steam Generator Reliability  

Science Conference Proceedings (OSTI)

Operating and maintenance experience relative to PWR steam generator reliability has produced a variety of "lessons learned." This information has been incorporated in a series of guidelines to aid utilities in major plant modifications and new plant construction.

1991-09-25T23:59:59.000Z

288

Airmass Modification over the Gulf of Mexico: Mesoscale Model and Airmass Transformation Model Forecasts  

Science Conference Proceedings (OSTI)

Several numerical models are used to examine strong air-sea fluxes and resultant airmass modification following a cold-frontal passage over the Gulf of Mexico. Data from the Gulf of Mexico Experiment (GUFMEX), which was conducted in February-...

Stephen D. Burk; William T. Thompson

1992-08-01T23:59:59.000Z

289

urbino worldwide campus applied computer scienceComputer Architecture  

E-Print Network (OSTI)

urbino worldwide campus applied computer scienceComputer Architecture alessandro bogliolo isti information science and technology institute 1/16 05.03 Pipeline hazards 05 CPU 05.03 Pipeline hazards;urbino worldwide campus applied computer scienceComputer Architecture alessandro bogliolo isti

Bogliolo, Alessandro

290

Applying to EPA for Approval of Other Uses of Phosphogypsum  

E-Print Network (OSTI)

Applying to EPA for Approval of Other Uses of Phosphogypsum: Preparing and Submitting a Complete. EP-D-04-007, Work Assignment 0-2 December 2005 #12;ii Applying for Other Uses of Phosphogypsum phosphogypsum in stacks? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.4. What

291

Nuclear Maintenance Applications Center: Maintenance and Modification Work Planner Training Program Description  

Science Conference Proceedings (OSTI)

The purpose of this report is to provide guidance for the development of a training program for the qualification of maintenance and modification work planners. The training program is intended to provide maintenance and modification work planners with the fundamental knowledge and skills required to prepare consistent, high quality packages aligned with site-specific and industry standards.This report provides a standard approach for developing and implementing a work planner training ...

2013-10-24T23:59:59.000Z

292

Applied Mathematics | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Applied Applied Mathematics Advanced Scientific Computing Research (ASCR) ASCR Home About Research Applied Mathematics Applied Mathematics Conferences And Workshops Computer Science Next Generation Networking Scientific Discovery through Advanced Computing (SciDAC) Computational Science Graduate Fellowship (CSGF) ASCR SBIR-STTR Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) News & Resources Contact Information Advanced Scientific Computing Research U.S. Department of Energy SC-21/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-7486 F: (301) 903-4846 E: sc.ascr@science.doe.gov More Information » Research Applied Mathematics Print Text Size: A A A RSS Feeds FeedbackShare Page

293

Remediation of Mercury and Industrial Contaminants Applied Field Research  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remediation of Mercury and Industrial Contaminants Applied Field Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Located on the Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, the RoMIC-AFRI was established to protect water resources by addressing the challenge of preventing contamination. The initiative at Oak Ridge is a collaborative effort that leverages DOE investments in basic science and applied research and the work of site contractors to address the complex challenges in the remediation of legacy waste at the Oak Ridge Reservation. The mission of the Remediation of Mercury and Industrial Contaminants

294

Applied Materials Switzerland SA Formerly HCT Shaping Systems SA | Open  

Open Energy Info (EERE)

Switzerland SA Formerly HCT Shaping Systems SA Switzerland SA Formerly HCT Shaping Systems SA Jump to: navigation, search Name Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA) Place Chezeaux, Switzerland Zip 1033 Product Manufacturer of wire saws for the semiconductor and photovoltaic wafer slicing industries. References Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA) is a company located in Chezeaux, Switzerland . References ↑ "[ Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA)]" Retrieved from "http://en.openei.org/w/index.php?title=Applied_Materials_Switzerland_SA_Formerly_HCT_Shaping_Systems_SA&oldid=342245"

295

Modification of laminar flow ultrafine condensation particle counters for the enhanced detection of 1 nm condensation nuclei  

SciTech Connect

This paper describes simple modifications to thermally diffusive laminar flow ultrafine condensation particle counters (UCPCs) that allow detection of {approx}1 nm condensation nuclei with much higher efficiencies than have been previously reported. These nondestructive modifications were applied to a commercial butanol based UCPC (TSI 3025A) and to a diethylene glycol-based UCPC (UMN DEG-UCPC). Size and charge dependent detection efficiencies using the modified UCPCs (BNL 3025A and BNL DEGUCPC) were measured with high resolution mobility classified aerosols composed of NaCl, W, molecular ion standards of tetraalkyl ammonium bromide, and neutralizer-generated ions. With negatively charged NaCl aerosol, the BNL 3025A and BNL DEGUCPC achieved detection efficiencies of 37% (90x increase over TSI 3025A) at 1.68 nm mobility diameter (1.39 nm geometric diameter) and 23% (8x increase over UMN DEG-UCPC) at 1.19 nm mobility diameter (0.89 nm geometric diameter), respectively. Operating conditions for both UCPCs were identified that allowed negatively charged NaCl and W particles, but not negative ions of exactly the same mobility size, to be efficiently detected. This serendipitous material dependence, which is not fundamentally understood, suggests that vapor condensation might sometimes allow for the discrimination between air 'ions' and charged 'particles.' As a detector in a scanning mobility particle spectrometer (SMPS), a UCPC with this strong material dependence would allow for more accurate measurements of sub-2 nm aerosol size distributions due to the reduced interference from neutralizer-generated ions and atmospheric ions, and provide increased sensitivity for the determination of nucleation rates and initial particle growth rates.

Kuang, C.; Chen, M.; McMurry, P. H.; Wang, J.

2011-10-01T23:59:59.000Z

296

Modification of heterogeneous chemistry by complex substrate morphology  

Science Conference Proceedings (OSTI)

This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). Chemistry in many environmental systems is determined at some stage by heterogeneous reaction with a surface. Typically the surface exists as a dispersion or matrix of particulate matter or pores, and a determination of the heterogeneous chemistry of the system must address the extent to which the complexity of the environmental surface affects the reaction rates. Reactions that are of current interest are the series of chlorine nitrate reactions important in polar ozone depletion. The authors have applied surface spectroscopic techniques developed at LANL to address the chemistry of chlorine nitrate reactions on porous nitric and sulfuric acid ice surfaces as a model study of the measurement of complex, heterogeneous reaction rates. The result of the study is an experimental determination of the surface coverage of one adsorbed reagent and a mechanism of reactivity based on the dependence of this coverage on temperature and vapor pressure. The resulting mechanism allows the first comprehensive modeling of chlorine nitrate reaction probability data from several laboratories.

Henson, B.F.; Buelow, S.J.; Robinson, J.M.

1998-12-31T23:59:59.000Z

297

Surface Modification of Nickel Foams by a Slurry Aluminizing Process  

Science Conference Proceedings (OSTI)

A novel slurry-based process for aluminizing nickel foams while improving the mechanical properties and conserving the excellent ductility is reported. Cellular unalloyed nickel foams with 92% porosity and uniform pore size and distribution were used as a starting material. Several slurries of different compositions were examined to investigate the possibility of developing an aluminide-nickel intermetallic coating on a Ni foam without considerably degrading the original ductile properties of the foam. The process temperature was varying from 400 to 850 deg. C and the process holding time was ranging between 2h to 6h. Scanning electron microscopy with an energy dispersive X-ray spectrometry and X-Ray diffraction were applied to assess the effectiveness of the aluminizing process and determine both the optimum parameters of the procedure (slurry composition, holding temperature and time) and the concentration profiles across the coating cross-section. The mechanical behavior of the aluminized Ni-foams was evaluated by the conduction of micro-tension tests. The resulting Ni-foams after aluminization retain the pore structure of original Ni-foams and present a thick outer surface layer which consists of a range of aluminide phases. The mechanical properties of the Ni-foams aluminized in low process temperature were insignificantly affected.

Omar, H.; Papanastasiou, N.; Psyllaki, P.; Stergioudi, F.; Tsipas, D. N. [Physical Metallurgy Laboratory (PML), Mechanical Engineering Department, Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece); Tsipas, S. A. [Dpto. Ciencia e Ingenieria de Materiales e Ingenieria Quimica Escuela Politecnica Superior Universidad Carlos III de Madrid, Avda de la Universidad, 30 28911 Leganes (Spain); Michailidis, N. [Physical Metallurgy Laboratory (PML), Mechanical Engineering Department, Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece); Department of Mechanical Engineering, Physical Metallurgy Laboratory, Aristotle University of Thessaloniki, Thessaloniki 54124 (Greece)

2010-01-21T23:59:59.000Z

298

How to Apply for Senior Executive positions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply for Senior Executive positions How to Apply for Senior Executive positions How to Apply for Senior Executive positions To apply vacancies for SENIOR EXECUTIVE SERVICE (SES) , SENIOR LEVEL (SL), SCIENTIFIC AND PROFESSIONAL (ST) positions within the Department of Energy please visit OPM's website: http://www.usajobs.gov. From this site, you may download announcements for vacancies of interest to you. SENIOR EXECUTIVE SERVICE (SES) The Guide to Senior Executive Service Qualifications provides detailed information about executive qualifications and tips for writing effective qualification statements. What Are Executive Core Qualifications (ECQs) The Executive Core Qualifications (ECQs) define the competencies needed to build a federal corporate culture that drives for results, serves customers, and builds successful teams and coalitions within and outside

299

Energy Efficiency in Buildings in Switzerland - Applied Research...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency in Buildings in Switzerland - Applied Research on Vacuum Insulation, Passive Houses etc. Speaker(s): Armin Binz Date: January 21, 2003 - 12:00pm Location: Bldg....

300

Electrical capacitance volume tomography (ECVT) applied to bubbling fluid beds  

SciTech Connect

These presentation visuals illustrate the apparatus and method for applying Electrical Capacitance Volume Tomography (ECVT) to bubbling fluid beds to their solid fraction and bubble properties. Results are compared to estimated values.

Weber, J., Mei, J.

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

A Stereo Photogrammetric Technique Applied to Orographic Convection  

Science Conference Proceedings (OSTI)

This paper describes a technique for photogrammetric analysis of stereo pairs of images that is applied to the study of orographic convection. The technique is designed for use with digital images and assumes detailed knowledge of the camera ...

Joseph A. Zehnder; Jiuxiang Hu; Anshuman Razdan

2007-06-01T23:59:59.000Z

302

Proceedings of the 2008 ACM symposium on Applied computing  

Science Conference Proceedings (OSTI)

Welcome to the 23rd Annual ACM Symposium on Applied Computing (SAC 2008). This international event is dedicated to computer scientists, engineers, and practitioners seeking innovative ideas in various areas of computer applications. This year, the conference ...

Roger L. Wainwright; Hisham M. Haddad

2008-03-01T23:59:59.000Z

303

DOE Solar Decathlon: How to Apply for the Solar Decathlon  

NLE Websites -- All DOE Office Websites (Extended Search)

Photos Videos Education Sponsors Volunteers History FAQs Contacts How To Apply for the Solar Decathlon Is your school interested in participating in the next U.S. Department of...

304

NEW MOTOR DESIGN CONCEPT FOR ENERGY SAVING APPLIED TO  

E-Print Network (OSTI)

SHARK, NEW MOTOR DESIGN CONCEPT FOR ENERGY SAVING APPLIED TO SWITCHED RELUCTANCE MOTOR by Ana of the cylindrical and Shark air gap Switched Reluctance Motors and their assistance during the experimental work with other motor technologies such

305

Los Alamos Lab: International and Applied Technology Division...  

NLE Websites -- All DOE Office Websites (Extended Search)

International Research and Analysis, IAT-1 IAT-1 has one of the most diverse work forces in the division. By applying its scientific and engineering skills to designated problems,...

306

Proceedings of the 2009 ACM symposium on Applied Computing  

Science Conference Proceedings (OSTI)

On behalf of the Organizing Committee, we welcome you to the 24th Annual ACM Symposium on Applied Computing (SAC 2009) hosted by Chaminade University in Hawaii. This international forum has been dedicated to computer scientists, engineers and practitioners ...

Sung Y. Shin; Sascha Ossowski

2009-03-01T23:59:59.000Z

307

18.337J / 6.338J Applied Parallel Computing (SMA 5505), Spring 2005  

E-Print Network (OSTI)

Applied Parallel Computing is an advanced interdisciplinary introduction to applied parallel computing on modern supercomputers.

Edelman, Alan

308

Brine pH Modification Scale Control Technology. 2. A Review.pdf | Open  

Open Energy Info (EERE)

Brine pH Modification Scale Control Technology. 2. A Review.pdf Brine pH Modification Scale Control Technology. 2. A Review.pdf Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Brine pH Modification Scale Control Technology. 2. A Review.pdf Abstract A variety of processes has been deployed at geothermalfields to inhibit or control siliceous scale deposition. It has beenknown for decades that the kinetics of silicic acid polymerizationis retarded when the pH of an aqueous solution is decreased.Therefore, a potential method for controlling siliceous scalingfrom geothermal brine is treatment with acid. Early attempts tocontrol siliceous scaling in geothermal brine-handling equipmentby retarding polymerization led to the belief that the pHhad to be reduced to < 4. Acidifying brine was discourageddue to corrosion concerns.

309

How to Apply the ENERGY STAR Certified Building Decal  

NLE Websites -- All DOE Office Websites (Extended Search)

How to Apply the ENERGY STAR How to Apply the ENERGY STAR Certified Building Decal Page Cyan-and-White Decal Instructions Application Instructions 2 How to Make a Glass Plaque 4 Cyan-and-White Paper Templates 5 "Etched-Look" Decal Instructions Application Instructions 7 How to Make a Glass Plaque 9 "Etched-Look" Paper Templates 10 How to Apply the ENERGY STAR Cyan and White Certified Building Decal What's in this package: Two sets of: ENERGY STAR logo decal 1. "Certified Building" lettering decal, with thick white paper on 2. one side and thin, semi-translucent paper on the other side. Paper templates of logo and lettering What you'll need: Level 1. Masking tape 2. Rubbing alcohol and a clean, soft cloth 3. Drivers license, credit card, or other rigid

310

How to Apply for Weatherization Assistance | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply for Weatherization Assistance How to Apply for Weatherization Assistance How to Apply for Weatherization Assistance March 24, 2009 - 12:45pm Addthis Elizabeth Spencer Communicator, National Renewable Energy Laboratory A few weeks ago, the U.S. Department of Energy announced that it was investing $8 billion into weatherization and state energy grants-$5 billion of which is going directly to the Weatherization Assistance Program. And why is that interesting? Well, the Weatherization Assistance Program provides low-income families with free-of-charge, energy efficient upgrades to their homes. A more efficient home means that you pay less every month on your energy bills-and while that's the kind of upgrade anyone can benefit from, this program helps those who need those extra dollars the

311

Modular Applied General Equilibrium Tool (MAGNET) | Open Energy Information  

Open Energy Info (EERE)

Modular Applied General Equilibrium Tool (MAGNET) Modular Applied General Equilibrium Tool (MAGNET) Jump to: navigation, search Tool Summary Name: Modular Applied General Equilibrium Tool (MAGNET) Agency/Company /Organization: LEI Wageningen UR, the Netherlands Complexity/Ease of Use: Moderate Related Tools Ex Ante Appraisal Carbon-Balance Tool (EX-ACT) Climate Rapid Overview and Decision Support (C-ROADS) Simulator Partnership for Economic Policy Modeling and Policy Impact Analysis (MPIA) ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS A modular global computable general equilibrium model that covers the whole economy and has been used extensively in agricultural, environmental, and trade policy analysis; builds on the GTAP model, and is the successor of LEITAP. Approach MAGNET is based on the Global Trade Analysis Project (GTAP) model and

312

Overview Of Electromagnetic Methods Applied In Active Volcanic Areas Of  

Open Energy Info (EERE)

Of Electromagnetic Methods Applied In Active Volcanic Areas Of Of Electromagnetic Methods Applied In Active Volcanic Areas Of Western United States Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Overview Of Electromagnetic Methods Applied In Active Volcanic Areas Of Western United States Details Activities (7) Areas (2) Regions (0) Abstract: A better understanding of active volcanic areas in the United States through electromagnetic geophysical studies received foundation from the many surveys done for geothermal exploration in the 1970's. Investigations by governmental, industrial, and academic agencies include (but are not limited to) mapping of the Cascades. Long Valley/Mono area, the Jemez volcanic field, Yellowstone Park, and an area in Colorado. For one example - Mt. Konocti in the Mayacamas Mountains, California - gravity,

313

Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remote Gas Well Monitoring Technology Applied to Marcellus Shale Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site February 10, 2012 - 12:00pm Addthis Washington, DC - A technology to remotely monitor conditions at energy-rich Marcellus Shale gas wells to help insure compliance with environmental requirements has been developed through a research partnership funded by the U.S. Department of Energy (DOE). NETL-RUA researcher Dr. Michael McCawley hasdeveloped a technology to remotely monitor theenvironment around energy-rich Marcellus Shale gas wells. Photo courtesy of West Virginia University.The technology - which involves three wireless monitoring modules to measure volatile organic compounds, dust, light and sound - is currently being tested at a Marcellus

314

Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource  

Open Energy Info (EERE)

Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Locations In The Us Basin And Range With A Focus On Dixie Meadows, Nv Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Locations In The Us Basin And Range With A Focus On Dixie Meadows, Nv Details Activities (1) Areas (1) Regions (0) Abstract: This paper presents an overview of the work our collaboration is doing to increase the detailed mapped resource base for geothermal exploration in the Western US. We are imaging several large areas in the western US with high resolution airborne hyperspectral and satellite multispectral sensors. We have now entered the phase where the remote sensing techniques and tools we are developing are mature enough to be

315

Total System Performance Assessment-License Application Design Selection (LADS) Phase 1 Analysis of Surface Modification Consisting of Addition of Alluvium (Feature 23a)  

Science Conference Proceedings (OSTI)

The objective of this report is to document the analysis that was conducted to evaluate the effect of a potential change to the TSPA-VA base case design that could improve long-term repository performance. The design feature evaluated in this report is a modification of the topographic surface of Yucca Mountain. The modification consists of covering the land surface immediately above the repository foot-print with a thick layer of unconsolidated material utilizing rip-rap and plants to mitigate erosion. This surface modification is designated as Feature 23a or simply abbreviated as F23a. The fundamental aim of F23a is to reduce the net infiltration into the unsaturated zone by enhancing the potential for evapotranspiratiration at the surface; such a change would, in turn, reduce the seepage flux and the rate of radionuclide releases from the repository. Field and modeling studies of water movement in the unsaturated zone have indicated that shallow infiltration at the surface is almost negligible in locations where the bedrock is covered by a sufficiently thick soil layer. In addition to providing storage for meteoric water, a thick soil layer would slow the downward movement of soil moisture to such an extent that evaporation and transpiration could easily transfer most of the soil-water back to the atmosphere. Generic requirements for the effectiveness of this design feature are two-fold. First, the soil layer above the repository foot-print must be thick enough to provide sufficient storage of meteoric water (from episodic precipitation events) and accommodate plant roots. Second, the added soil layer must be engineered so as to mitigate thinning by erosional processes and have sufficient thickness to accommodate the roots of common desert plants. Under these two conditions, it is reasonable to expect that modification would be effective for a significant time period and the net infiltration and deep percolation flux would be reduced by orders of magnitude lower than the present levels. Conceptually, the topographic surface above the repository foot-print would be re-contoured to make it more suitable for placement of unconsolidated materials (e.g., alluvium). Figure 1 shows the region of the surface modification in relation to the location of the repository foot-print. The surface contours in this region after modification are shown in the plot presented in Figure 2. Basically, the surface modification would be accomplished by applying cuts to the ridges slopes on the east flank of Yucca Mountain to produce a relatively uniform slope of about 10%. The alluvium would be covered with rock fragments (to imitate the desert pavement) to reduce erosion. This report documents the modeling assumptions and performance analysis conducted to estimate the long-term performance for Feature 23a. The performance measure for this evaluation is dose-rate. Results are presented that compare the dose-rate time histories for the new design feature to those of the TSPA-VA base case calculation (CRWMS M&O 1998a).

N. Erb

1999-06-11T23:59:59.000Z

316

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 12660 of 28,905 results. 51 - 12660 of 28,905 results. Download CX-002359: Categorical Exclusion Determination Validation of Innovative Exploration Technologies at the Colado, Nevada, Geothermal Prospect CX(s) Applied: B3.1, A9 Date: 05/11/2010 Location(s): Colado, Nevada Office(s): Energy Efficiency and Renewable Energy, Golden Field Office http://energy.gov/nepa/downloads/cx-002359-categorical-exclusion-determination Download CX-009549: Categorical Exclusion Determination Vapor Transport Deposition for Thin Film III-V Photovoltaics CX(s) Applied: A9, B3.6 Date: 11/09/2012 Location(s): CX: none Offices(s): Golden Field Office http://energy.gov/nepa/downloads/cx-009549-categorical-exclusion-determination Download Chapter 43- Contract Modifications http://energy.gov/management/downloads/chapter-43-contract-modifications

317

Guidance for Federal Departments and Agencies on Establishing, Applying,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guidance for Federal Departments and Agencies on Establishing, Guidance for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act Guidance for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act This guidance from the Council on Environmental Quality provides methods for substantiating categorical exclusions, clarifies the process for establishing categorical exclusions, outlines how agencies should engage the public when establishing and using categorical exclusions, describes how agencies can document the use of categorical exclusions, and recommends periodic agency review of existing categorical exclusions. Final Guidance for Federal Departments and Agencies on Establishing,

318

Guidance for Federal Departments and Agencies on Establishing, Applying,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for Federal Departments and Agencies on Establishing, for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act Guidance for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act This guidance from the Council on Environmental Quality provides methods for substantiating categorical exclusions, clarifies the process for establishing categorical exclusions, outlines how agencies should engage the public when establishing and using categorical exclusions, describes how agencies can document the use of categorical exclusions, and recommends periodic agency review of existing categorical exclusions. Final Guidance for Federal Departments and Agencies on Establishing,

319

Process for applying control variables having fractal structures  

DOE Patents (OSTI)

A process and apparatus for the application of a control variable having a fractal structure to a body or process. The process of the present invention comprises the steps of generating a control variable having a fractal structure and applying the control variable to a body or process reacting in accordance with the control variable. The process is applicable to electroforming where first, second and successive pulsed-currents are applied to cause the deposition of material onto a substrate, such that the first pulsed-current, the second pulsed-current, and successive pulsed currents form a fractal pulsed-current waveform.

Bullock, IV, Jonathan S. (Oak Ridge, TN); Lawson, Roger L. (Oliver Springs, TN)

1996-01-01T23:59:59.000Z

320

C: Applying the Toyota Production System to a Hospital Pharmacy  

E-Print Network (OSTI)

This paper presents the early results of an action research project to apply the principles of the Toyota Production System to a hospital pharmacy. We demonstrate that work systems can be improved through Bowen and Spear’s [3] Rules-in-Use: defining activities better, making simpler and more direct connections, and/or smoothing pathways. We also extend this work by introducing a problem-solving tool to facilitate process improvement. The paper will describe the interventions attempted, the results, and implications for applying the Rules-in-Use to health care environments.

Durward K. Sobek; Cindy Jimmerson

2003-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Development and evaluation of the combined loading modification to the V-notched rail shear test method for composite laminates.  

E-Print Network (OSTI)

??The objective of this research was to determine what modifications would be most effective in improving the loading capacity of the V-Notched Rail Shear test… (more)

Johnson, Jeffrey Douglas

2010-01-01T23:59:59.000Z

322

Proteomic investigation of protein interactions and post-translational modifications of the Pfh1 helicase and yeast telomerase holoenzymes.  

E-Print Network (OSTI)

??In this thesis I describe a targeted proteomics approach to study in vivo protein interactions and post-translational modifications of protein complexes involved in the maintenance… (more)

McDonald, Karin Rainey

2012-01-01T23:59:59.000Z

323

ANCCA, an estrogen-regulated AAA+ ATPase coactivator for ER alpha, is required for coregulator occupancy and chromatin modification  

E-Print Network (OSTI)

for coregulator occupancy and chromatin modification June X.at the ER target chromatin. Moreover, mutations at the ATPco-regulator complexes at chromatin is a process facilitated

Zou, June X; Revenko, Alexey S; Li, Li B; Gemo, Abigael T; Chen, Hong-Wu

2007-01-01T23:59:59.000Z

324

Biobased Surfactants and Detergents Synthesis, Properties, and ApplicationsChapter 2 Production and Modification of Sophorolipids from Agricultural Feedstocks  

Science Conference Proceedings (OSTI)

Biobased Surfactants and Detergents Synthesis, Properties, and Applications Chapter 2 Production and Modification of Sophorolipids from Agricultural Feedstocks Surfactants and Detergents eChapters Surfactants - Detergents Press &

325

Bio 3A -Applying to Health Professional Schools Dental Schools  

E-Print Network (OSTI)

Bio 3A - Applying to Health Professional Schools Dental Schools Admission Requirements and Helpful Requirements: Biology (w/lab) 1 to 1 1/2 years (At UCI Bio 93, 94, 97, 98, 99, *100 minimum). Many schools will require 3 labs. *BioSci 100 is a prerequisite for taking Bio labs at UCI. Some schools will require

Barrett, Jeffrey A.

326

Bio 3A -Applying to Health Professional Schools Pharmacy Schools  

E-Print Network (OSTI)

Bio 3A - Applying to Health Professional Schools Pharmacy Schools Admission Requirements individual web sites. Pharmacy School Admission Requirements: Biology (w/lab) Bio 93, 94*, 97, 98, 99, 100, E not be an interpersonal communication course) ­ not offered at UCI *Bio 94 is the prerequisite of Bio 97, but not required

Barrett, Jeffrey A.

327

A Test Calculus Framework applied to network security policies  

E-Print Network (OSTI)

A Test Calculus Framework applied to network security policies Yli`es Falcone1 , Jean'H`eres, France Abstract. We propose a syntax-driven test generation technique to au- tomaticaly derive abstract test cases from a set of requirements expressed in a linear temporal logic. Assuming that an elementary

Paris-Sud XI, Université de

328

Applying Bayesian Network Techniques to Prioritize Lean Six Sigma Efforts  

Science Conference Proceedings (OSTI)

In order to retain competitive advantages, many manufacturing organizations have applied Lean Six Sigma techniques to improve production processes. The general approach for implementing Lean Six Sigma is to perform various projects to tackle specific ... Keywords: Bayesian Network, Cause-and-Effect Relationships, Events of Interest, Lean, Probabilistic Inference, Six Sigma

Yanzhen Li, Rapinder S. Sawhne, Joseph H. Wilck

2013-04-01T23:59:59.000Z

329

Proceedings of the 2005 ACM symposium on Applied computing  

Science Conference Proceedings (OSTI)

Welcome to the 20th Annual ACM Symposium on Applied Computing (SAC 2005) hosted by the New Mexico Institute of Mining and Technology, Socorro, New Mexico, USA. As the Conference Chair and on behalf of the organizing committee, thank you for participating ...

Hisham M. Haddad; Andrea Omicini; Roger L. Wainwright; Lorie M. Liebrock

2005-03-01T23:59:59.000Z

330

Applying High Performance Computing to Analyzing by Probabilistic Model Checking  

E-Print Network (OSTI)

Applying High Performance Computing to Analyzing by Probabilistic Model Checking Mobile Cellular on the use of high performance computing in order to analyze with the proba- bilistic model checker PRISM. The Figure Generation Script 22 2 #12;1. Introduction We report in this paper on the use of high performance

Schneider, Carsten

331

Book review Carbon Nanotube Science: Synthesis, Properties and Appli-  

E-Print Network (OSTI)

Book review Carbon Nanotube Science: Synthesis, Properties and Appli- cations, Peter J.F. Harris in the nanotube discovery is dis- cussed in the first chapter of this book), a few years after ful- lerenes were of the nanotechnology era ­ you'll find their pictures on book covers, in newspaper articles and magazine centerfolds

Harris, Peter J F

332

Applying General Access Structure to Metering Ventzislav Nikov  

E-Print Network (OSTI)

Applying General Access Structure to Metering Schemes Ventzislav Nikov Department of Mathematics.vandewalle@esat.kuleuven.ac.be Abstract In order to decide on advertisement fees for web servers, Naor and Pinkas introduced metering number of clients. Several researchers have generalized the idea of Naor and Pinkas: #12;rst metering

International Association for Cryptologic Research (IACR)

333

Applying General Access Structure to Metering Ventzislav Nikov  

E-Print Network (OSTI)

Applying General Access Structure to Metering Schemes Ventzislav Nikov Department of Mathematics.vandewalle@esat.kuleuven.ac.be Abstract In order to decide on advertisement fees for web servers, Naor and Pinkas introduced metering number of clients. Several researchers have generalized the idea of Naor and Pinkas: first metering

International Association for Cryptologic Research (IACR)

334

Modeling and simulation applied in modernization of energy production plants  

Science Conference Proceedings (OSTI)

The present work presents a methodology that has been developed and successfully applied to support the information requirements of engineers in charge of the operation, modernization, and/or maintenance of energy production plants (power, oil and gas). ... Keywords: CAD software, energy production, engineering design and data management, industrial plant, operation and maintenance support

Jesús Vázquez Bustos; Benjamín Eddie Zayas Pérez

2011-06-01T23:59:59.000Z

335

A companion modelling approach applied to forest management planning  

Science Conference Proceedings (OSTI)

To assist the Societe Civile des Terres du Larzac (SCTL) in its effort to develop alternative forest management plans, a group of researchers and extension officers proposed applying a companion modelling approach. The objective was to support forest ... Keywords: Companion modelling, Forest management, Livestock farming, Multi-agent system, Participatory modelling

C. Simon; M. Etienne

2010-11-01T23:59:59.000Z

336

Neutron activation analysis applied to energy and environment  

SciTech Connect

Neutron activation analysis was applied to a number of problems concerned with energy production and the environment. Burning of fossil fuel, the search for new sources of uranium, possible presence of toxic elements in food and water, and the relationship of trace elements to cardiovascular disease are some of the problems in which neutron activation was used. (auth)

Lyon, W.S.

1975-01-01T23:59:59.000Z

337

Healthful LipidsChapter 20 Genetic Enhancement and Modification of Oil-Bearing Crops  

Science Conference Proceedings (OSTI)

Healthful Lipids Chapter 20 Genetic Enhancement and Modification of Oil-Bearing Crops Health Nutrition Biochemistry eChapters Health - Nutrition - Biochemistry AOCS Press 3F7B34ACED1D751D3E77973E19BEAD62 AOCS Press ...

338

Faculty Handbook Please send any revisions, suggestions, and/or modifications to provoff@fiu.edu  

E-Print Network (OSTI)

2012-2013 Faculty Handbook Please send any revisions, suggestions, and/or modifications to provoff@fiu.edu Updated 6-7-12 #12;Faculty Handbook 2012-2013 ii TABLE OF CONTENTS FLORIDA INTERNATIONAL UNIVERSITY VISION......................................................................17 #12;Faculty Handbook 2012-2013 iii Academic Freedom & Responsibility

Sadjadi, S. Masoud

339

Distribution and Modification of North Pacific Intermediate Water in the Kuroshio-Oyashio Interfrontal Zone  

Science Conference Proceedings (OSTI)

A multiship CTD survey was conducted in the Kuroshio-Oyash interfrontal zone in the area of 30°–41°N, 140°E–180° from May to June 1992 to examine the distribution, modification process, and formation site of North Pacific Intermediate Water (NPIW)...

Ichiro Yasuda; Kuniaki Okuda; Yugo Shimizu

1996-04-01T23:59:59.000Z

340

Semiclassical anomalies of the quantum mechanical systems and their modifications for the asymptotic matching  

SciTech Connect

JWKB solutions to the Initial Value Problems (IVPs) of the Time Independent Schrodinger's Equation (TISE) for the Simple Linear Potentials (SLPs) with a turning point parameter have been studied according to the turning points by graphical analysis to test the results of the JWKB solutions and suggested modifications. The anomalies happening in the classically inaccessible region where the SLP function is smaller than zero and the results of the suggested modifications, which are in consistent with the quantum mechanical theories, to remove these anomalies in this region have been presented. The origins of the anomalies and verifications of the suggested modifications showing a great success in the results have also been studied in terms of a suggested M{sub ij}=S{sup {approx}}{sub i-1,j} matrix elements made up of the JWKB expansion terms, S{sub i-1,j} (where i = 1, 2, 3 and j 1, 2). The results of the modifications for the IVPs and their application to the Bound State Problems (BSPs) with an example application of the Harmonic Oscillator (HO) have been presented and their generalization for any potential function have been discussed and classified accordingly.

Deniz, Coskun, E-mail: coskun.deniz@ege.edu.tr [Ege University, Faculty of Science, Department of Physics, Bornova 35100, Izmir (Turkey)

2011-08-15T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Surface Modification Agents Increase Safety, Security of Lithium-Ion Batteries  

Argonne National Laboratory has developed a process to modify the surface of the active material used in lithium-ion batteries. The modification agent can be a silane, an organometallic compound, or a mixture of two or more of such compounds. Both ...

342

Modification of boiler operating conditions for mercury emissions reductions in coal-fired utility boilers  

E-Print Network (OSTI)

Modification of boiler operating conditions for mercury emissions reductions in coal-fired utility boilers Carlos E. Romero *, Ying Li, Harun Bilirgen, Nenad Sarunac, Edward K. Levy Energy Research Center type, boiler operation, fly ash characteristics and type of environmental control equipment installed

Li, Ying

343

Effects of molecular interface modification in hybrid organic-inorganic photovoltaic cells  

E-Print Network (OSTI)

Effects of molecular interface modification in hybrid organic-inorganic photovoltaic cells Chiatzun in hybrid TiO2/regioregular poly 3-hexylthiophene P3HT photovoltaic cells. By employing a series of para in the field of organic photovoltaic PV cells1­7 and dye-sensitized solar cells DSSCs Refs. 7­10 as part

McGehee, Michael

344

Modifications of Air Flow Due to the Formation of a Reservoir  

Science Conference Proceedings (OSTI)

Local modifications of air flow caused by the construction of the Arenal Reservoir in Costa Rica were investigated. From the analysis of data recorded at a station near the downwind side of the reservoir for the years 1972–75 before and the years ...

Walter Fernandez; R. E. Chacón; JoséW. Melgarejo

1986-07-01T23:59:59.000Z

345

BEP project for Applied Mathematics/Applied Physics double degree Numerical solution of a three-dimensional electromagnetic  

E-Print Network (OSTI)

-dimensional electromagnetic force field Imagine a quadratic piece of metal, which is subject to a static current flux at its top boundary and insulated at the bottom. Assuming the current flux to be of Gaussian shape and applying suitable boundary conditions, we can derive equations to describe the current flux in the metal

Vuik, Kees

346

A Quick Guide for Applying at Mason Applying online is as easy as 1-2-3!  

E-Print Network (OSTI)

Jobs" from the quick links.. You can search jobs in the following ways: · Keywords - enter your own search terms · Posted Within - a drop-down list will appear ­ select from day, week, or month Innovation Is Tradition Page 1 of 6 11/15/2012 #12;A Quick Guide for Applying at Mason Step 1: Search

347

International Institute for Applied Systems Analysis | Open Energy  

Open Energy Info (EERE)

Analysis Analysis Jump to: navigation, search Logo: International Institute for Applied Systems Analysis Name International Institute for Applied Systems Analysis Address Schlossplatz 1, A-2361 Place Laxenburg, Austria Number of employees 201-500 Year founded 1972 Phone number (+43 2236) 807 0 Coordinates 48.0682549°, 16.358201° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.0682549,"lon":16.358201,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

348

Argonne applied mathematicians use INCITE awards to attack energy problems  

NLE Websites -- All DOE Office Websites (Extended Search)

Argonne applied mathematicians use INCITE awards to attack energy problems Argonne applied mathematicians use INCITE awards to attack energy problems March 27, 2013 Tweet EmailPrint What is the best possible power grid configuration for our nation? How can we balance the increasing demands for power while minimizing costs and avoiding waste of resources? Last year, Mihai Anitescu, a computational mathematician in Argonne's Mathematics and Computer Science Division. received DOE funding to establish the Multifaceted Mathematics for Complex Energy Systems (M2ACS) to tackle these questions. As part of the M2ACS research, Anitescu and his colleagues at Argonne are focusing on ways to optimize the effects of randomly changing variables, say, in wind or resource demand. Such variables can number into the billions. And to be useful for energy systems planning, any calculations

349

Generative Design Systems Applied to Low-Energy Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Generative Design Systems Applied to Low-Energy Buildings Generative Design Systems Applied to Low-Energy Buildings Speaker(s): Maria Luisa de Oliveira Gama Caldas Date: March 15, 2012 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Paul Mathew Generative Design Systems (GDS) represent a step beyond parametric models, integrating design goals, building simulations and shape generation. In this seminar, present and future research projects on the application of different GDS to low-energy buildings are discussed. The software GENE_ARCH integrates energy simulations with multicriteria search methods such as pareto genetic algorithms, to locate acceptable alternatives that move the current design towards performance goals set by the user. DIVA, a system that integrates parametric geometrical modeling with Radiance, Daysim and

350

Environmental Impact and Sustainability Applied General Equilibrium Model  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Environmental Impact and Sustainability Applied General Equilibrium Model (ENVISAGE) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Environmental Impact and Sustainability Applied General Equilibrium Model (ENVISAGE) Agency/Company /Organization: World Bank Sector: Climate Topics: Analysis Tools Complexity/Ease of Use: Advanced Website: go.worldbank.org/ZC77UJYJ50 Related Tools TransportToolkit Prototype Threshold 21 Model General Equilibrium Modeling Package (GEMPACK) ... further results Designed to analyze a variety of issues related to the economics of climate

351

Applied Super Conductor Group, Oxide Molecular Beam Epitaxy Group,  

NLE Websites -- All DOE Office Websites (Extended Search)

AEMG Homepage AEMG Homepage Site Details Homepage Research Publications Presentations Facilities How to Contact Us Other Information Basic Energy Sciences Directorate Links BNL Site Index Can't View PDFs? Advanced Energy Materials Group Applied Superconductivity The applied superconductivity research (past funded by DOE Office of Electricity Delivery and Energy Reliability) is related to modernization of the U.S. power grid. One direction of the modernization is replacement of normal metal (copper, aluminum) transmission lines with High Temperature Superconducting (HTS) cables. Our group concentrates its effort on studying fundamental thermodynamics of nucleation and texture development of thick YBCO layers. High-performance YBCO layer is a critical element of modern second generation (2G) HTS wire.

352

Fifth SIAM conference on applied linear algebra. Final report  

SciTech Connect

The SIAM Conferences on Applied Linear Algebra are the centerpiece of activities for the SIAG on Linear Algebra. They are held every three years and bring together a diverse group of applied linear algebraists, representing industry, government and academics in both matrix theory and matrix computations. This sequence of conferences has two related goals: (1) to be useful and interesting to linear algebraists of every area of specialization, and, (2) to develop and expose connections among problems in different areas. Many aspects of the 1994 conference were carefully chosen to enhance interchange between the various groups and yet still provide a solid focus on specialities. The organizing committee adopted a new meeting structure to resolve the conflict between these two goals at earlier meetings in the series. We have prepared this report for others who may wish to consider our structure as an alternative to more traditional arrangements.

Lewis, J.G.; Gilbert, J.R.; Parlett, B.N.

1994-11-16T23:59:59.000Z

353

Applied Science Division annual report, Environmental Research Program FY 1983  

Science Conference Proceedings (OSTI)

The primary concern of the Environmental Research Program is the understanding of pollutant formation, transport, and transformation and the impacts of pollutants on the environment. These impacts include global, regional, and local effects on the atmosphere and hydrosphere, and on certain aspects of human health. This multidisciplinary research program includes fundamental and applied research in physics, chemistry, engineering, and biology, as well as research on the development of advanced methods of measurement and analysis. During FY 1983, research concentrated on atmospheric physics and chemistry, applied physics and laser spectroscopy, combustion theory and phenomena, environmental effects of oil shale processing, freshwater ecology and acid precipitation, trace element analysis for the investigation of present and historical environmental impacts, and a continuing survey of instrumentation for environmental monitoring.

Cairns, E.J.; Novakov, T.

1984-05-01T23:59:59.000Z

354

Magnetic response to applied electrostatic field in external magnetic field  

E-Print Network (OSTI)

We show, within QED and other possible nonlinear theories, that a static charge localized in a finite domain of space becomes a magnetic dipole, if it is placed in an external (constant and homogeneous) magnetic field in the vacuum. The magnetic moment is quadratic in the charge, depends on its size and is parallel to the external field, provided the charge distribution is at least cylindrically symmetric. This magneto-electric effect is a nonlinear response of the magnetized vacuum to an applied electrostatic field. Referring to a simple example of a spherically-symmetric applied field, the nonlinearly induced current and its magnetic field are found explicitly throughout the space, the pattern of lines of force is depicted, both inside and outside the charge, which resembles that of a standard solenoid of classical magnetostatics.

T. C. Adorno; D. M. Gitman; A. E. Shabad

2013-11-16T23:59:59.000Z

355

1984 Review of the Applied Plasma Physics Program  

SciTech Connect

This report describes the present and planned programs of the Division of Applied Plasma Physics (APP), Office of Fusion Energy. The major activities of the division include fusion theory, experimental plasma research, advanced fusion concepts, and the magnetic fusion energy computer network. The planned APP program is consistent with the recently issued Comprehensive Program Management Plan for Magnetic Fusion Energy, which describes the overall objectives and strategy for the development of fusion energy.

1984-09-01T23:59:59.000Z

356

Sodium-Bearing Waste Treatment, Applied Technology Plan  

SciTech Connect

Settlement Agreement between the Department of Energy and the State of Idaho mandates treatment of sodium-bearing waste at the Idaho Nuclear Technology and Engineering Center within the Idaho National Engineering and Environmental Laboratory. One of the requirements of the Settlement Agreement is to complete treatment of sodium-bearing waste by December 31, 2012. Applied technology activities are required to provide the data necessary to complete conceptual design of four identified alternative processes and to select the preferred alternative. To provide a technically defensible path forward for the selection of a treatment process and for the collection of needed data, an applied technology plan is required. This document presents that plan, identifying key elements of the decision process and the steps necessary to obtain the required data in support of both the decision and the conceptual design. The Sodium-Bearing Waste Treatment Applied Technology Plan has been prepared to provide a description/roadmap of the treatment alternative selection process. The plan details the results of risk analyzes and the resulting prioritized uncertainties. It presents a high-level flow diagram governing the technology decision process, as well as detailed roadmaps for each technology. The roadmaps describe the technical steps necessary in obtaining data to quantify and reduce the technical uncertainties associated with each alternative treatment process. This plan also describes the final products that will be delivered to the Department of Energy Idaho Operations Office in support of the office's selection of the final treatment technology.

Lance Lauerhass; Vince C. Maio; S. Kenneth Merrill; Arlin L. Olson; Keith J. Perry

2003-06-01T23:59:59.000Z

357

Alloy Modification  

Science Conference Proceedings (OSTI)

...Ilmenite Alumina Silica flour Iron powder Fluorspar Feldspar Manganese dioxide Asbestos (up to 50%) was used as a slag former, but has been phased

358

Opportunities to Apply Phase Change Materials to Building Enclosures Webinar  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2011 1, 2011 Opportunities to Apply Phase Change Materials to Building Enclosures Welcome to the Webinar! We will start at 2:00 PM Eastern Time Be sure that you are also dialed into the telephone conference call: Dial-in number: 888-950-6757; Pass code: 6420234 1 | Building America Program www.buildingamerica.gov Building America: Introduction November 11, 2011 Chuck Booten Chuck.Booten@nrel.gov Building Technologies Program 2 | Building America Program www.buildingamerica.gov * Reduce energy use in new and existing residential buildings * Promote building science and systems engineering / integration approach * "Do no harm": Ensure safety, health and durability are maintained or improved

359

Applying a Model Transformation Taxonomy to Graph Transformation Technology  

E-Print Network (OSTI)

A taxonomy of model transformations was introduced in [16]. Among others, such a taxonomy can help developers in deciding which language, forma lism, tool or mechanism is best suited to carry out a particular model transformation activity. In this paper we apply the taxonomy to the technique of graph transformation, and we exemplify it by referring to four representative graph transformation tools. As a byproduct of our analysis, we discuss how well each of the considered tools carry out the activity of model transformation.

Tom Mens; Pieter Van Gorp; Dániel Varró; Gabor Karsai

2005-01-01T23:59:59.000Z

360

Towards Applying Reengineering Services to Energy-Efficient Applications  

E-Print Network (OSTI)

Abstract—Conserving resources and saving energy has become an important issue for information and communication technology. With increasing adoption of smartphones and tablet PCs, reducing energy consumption in mobile computing is of particular significance. User expectations towards their mobile devices are rising, and functionality is increasing. Accordingly, available energy is made a scarce resource. This paper discusses how software reengineering techniques, like dynamic analysis and refactoring, can be applied to the field of energy-aware computing, to monitor, analyze, and optimize the energy profile of mobile applications and devices.

Jan Jelschen Marion Gottschalk

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

ENERGY STAR Industrial Plant Certification: Instructions for applying |  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Plant Certification: Instructions for Industrial Plant Certification: Instructions for applying Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

362

Hazardous Gases VASILIS M. FTHENAKIS Department of Applied Science  

Office of Scientific and Technical Information (OSTI)

Mitigation Options for Mitigation Options for Accidental Releases of Hazardous Gases VASILIS M. FTHENAKIS Department of Applied Science Brookhaven National Laboratory Upton, N Y 11973 ABSTRACT The objective of this paper is to review and compare technologies available for mitigation of unconfined releases of toxic and flammable gases. These technologies indude: secondary confinement, de- inventory, vapor barriers, foam spraying, and water sprays/monitors. Guidelines for the design and/or operation of effective post-release mitigation systems and case studies involving actual industrial mitigation systems are also presented. 1. ACCIDENT PREVENTION & MITIGATION OPTIONS Accident prevention and mitigation in the process industries is based on the military concept of defense in

363

Applying pomdps to dialog systems in the troubleshooting domain  

E-Print Network (OSTI)

This paper reports on progress applying partially observable Markov decision processes (POMDPs) to a commercial dialog domain: troubleshooting. In the troubleshooting domain, a spoken dialog system helps a user to fix a product such as a failed DSL connection. Past work has argued that a POMDP is a principled approach to building spoken dialog systems in the simpler slot-filling domain; this paper explains how the POMDPs formulation can be extended to the more complex troubleshooting domain. Results from dialog simulation verify that a POMDP outperforms a handcrafted baseline. 1

Jason D. Williams

2007-01-01T23:59:59.000Z

364

Applying Learnable Evolution Model to Heat Exchanger Design  

E-Print Network (OSTI)

A new approach to evolutionary computation, called Learnable Evolution Model (LEM), has been applied to the problem of optimizing tube structures of heat exchangers. In contrast to conventional Darwiniantype evolutionary computation algorithms that use various forms of mutation and/or recombination operators, LEM employs machine learning to guide the process of generating new individuals. A system, ISHED1, based on LEM, automatically searches for the highest capacity heat exchangers under given technical and environmental constraints. The results of experiments have been highly promising, often producing solutions exceeding the best human designs.

Kenneth A. Kaufman; Ryszard S. Michalski

2000-01-01T23:59:59.000Z

365

Loop Quantum Theory Applied to Biology and Nonlinear Whole Biology  

E-Print Network (OSTI)

The loop quantum theory, which constitutes a very small discontinuous space, as new method is applied to biology. The model of protein folding and lungs is proposed. In the model, some known results are used, and four approximate conclusions are obtained: their structures are quantized, their space regions are finite, various singularities correspond to folding and crossed points, and different types of catastrophe exist. Further, based on the inseparability and correlativity of the biological systems, the nonlinear whole biology is proposed, and four basic hypotheses are formed. It may unify reductionism and holism, structuralism and functionalism. Finally, the medical meaning of the theory is discussed briefly.

Yi-Fang Chang

2008-01-02T23:59:59.000Z

366

Microsoft Word - Final Class 2 Permit Modification Request TRUPACT III.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

January 10, 2011 January 10, 2011 Mr. James Bearzi. Chief Hazardous Waste Bureau New Mexico Environment Department 2905 Rodeo Park Drive East, Building 1 Santa Fe, New Mexico 87505-6303 Subject: Notification of a Class 2 Permit Modification to Permit Number: NM4890139088-TSDF Dear Mr. Bearzi: Enclosed is a Class 2 Permit Modification Request to: * Add TRUPACT-II I and Standard Large Box 2 * Revise Area of Contact-Handled Bay We certify under penalty of law that this document and the enclosure were prepared under our direction or supervision in accordance with a system designed to assure that qualified personnel properly gather and evaluate the information sUbmitted. Based on our inquiry of the person or persons who manage the system, or those persons directly responsible for

367

Evaluation of replacement protocols and modifications to TCP to enhance ASC Wide Area Network performance.  

SciTech Connect

Historically, TCP/IP has been the protocol suite used to transfer data throughout the Advanced Simulation and Computing (ASC) community. However, TCP was developed many years ago for an environment very different from the ASC Wide Area Network (WAN) of today. There have been numerous publications that hint of better performance if modifications were made to the TCP algorithms or a different protocol was used to transfer data across a high bandwidth, high delay WAN. Since Sandia National Laboratories wants to maximize the ASC WAN performance to support the Thor's Hammer supercomputer, there is strong interest in evaluating modifications to the TCP protocol and in evaluating alternatives to TCP, such as SCTP, to determine if they provide improved performance. Therefore, the goal of this project is to test, evaluate, compare, and report protocol technologies that enhance the performance of the ASC WAN.

Romero, Randy L. Jr.

2004-09-01T23:59:59.000Z

368

Dynamics of quasi-spherical Z-pinch implosions with mass redistribution and displacement modification  

Science Conference Proceedings (OSTI)

Implosions of (quasi-)spherical loads with mass redistribution and displacement modification are investigated numerically. Both methods can theoretically counterbalance the nonuniformity of magnetic pressure along the load surface and realize quasi-spherical Z-pinch implosions. Mass redistribution is feasible for spherical loads with large radius and weight, while the displacement modification is more suitable for light loads, such as those composed of wire arrays. Simulation results suggest that, for mass redistributed spherical loads, wall instabilities induced by polar mass flows will deform the imploding shell. For prolate spherical loads, in which the wall instability cannot develop, the kinetic energy distribution is disturbed at high latitude. These passive behaviors and their possible mitigation methods, such as reshaping the electrode, are investigated numerically in this paper.

Zhang Yang [Institute of Applied Physics and Computational Mathematics, P. O. Box 8009-09, Beijing 100094 (China); Institute of Nuclear Physics and Chemistry, P. O. Box 919-212, Mianyang 621900 (China); Ding Ning; Sun Shunkai; Xue Chuang; Ning Cheng; Xiao Delong; Huang Jun [Institute of Applied Physics and Computational Mathematics, P. O. Box 8009-09, Beijing 100094 (China); Li Zhenghong [Institute of Nuclear Physics and Chemistry, P. O. Box 919-212, Mianyang 621900 (China)

2012-12-15T23:59:59.000Z

369

More about spontaneous Lorentz-violation and infrared modification of gravity  

E-Print Network (OSTI)

We consider a model with Lorentz-violating vector field condensates, in which dispersion laws of all perturbations, including tensor modes, undergo non-trivial modification in the infrared. The model is free of ghosts and tachyons at high 3-momenta. At low 3-momenta there are ghosts, and at even lower 3-momenta there exist tachyons. Still, with appropriate choice of parameters, the model is phenomenologically acceptable. Beyond a certain large distance scale and even larger time scale, the gravity of a static source changes from that of General Relativity to that of van Dam--Veltman--Zakharov limit of the Fierz--Pauli theory. Yet the late time cosmological evolution is always determined by the standard Friedmann equation, modulo small correction to the ``cosmological Planck mass'', so the modification of gravity cannot by itself explain the accelerated expansion of the Universe. We argue that the latter property is generic in a wide class of models with condensates.

M. V. Libanov; V. A. Rubakov

2005-05-25T23:59:59.000Z

370

EG&G Mound Applied Technologies payroll system  

Science Conference Proceedings (OSTI)

EG&G Mound Applied Technologies, Inc., manages and operates the Mound Facility, Miamisburg, Ohio, under a cost-plus-award-fee contract administered by the Department of Energy`s Albuquerque Field Office. The contractor`s Payroll Department is responsible for prompt payment in the proper amount to all persons entitled to be paid, in compliance with applicable laws, regulations, and legal decisions. The objective was to determine whether controls were in place to avoid erroneous payroll payments. EG&G Mound Applied Technologies, Inc., did not have all the internal controls required by General Accounting Office Title 6, ``Pay, Leave, and Allowances.`` Specifically, they did not have computerized edits, separation of duties and responsibilities, and restricted access to payroll data files. This condition occurred because its managers were not aware of Title 6 requirements. As a result, the contractor could not assure the Department of Energy that payroll costs were processes accurately; and fraud, waste, or abuse of Department of Energy funds could go undetected. Our sample of 212 payroll transactions from a population of 66,000 in FY 1991 disclosed only two minor processing errors and no instances of fraud, waste or abuse.

Not Available

1992-02-07T23:59:59.000Z

371

Rail-gap switch modifications and test data for the Atlas capacitor bank  

DOE Green Energy (OSTI)

Atlas is a facility being designed at the Los Alamos National Laboratory (LANL) to perform high energy-density experiments in support of weapons-physics and basic-research programs. The capacitor bank design consists of a 36-MJ array of 240-kV Marx modules. The system is designed to deliver a peak current of 45- to 50-MA with a 4- to 5-us risetime. Evaluation, testing and qualification of key components of the Marx module are being conducted. One key element of the Marx module is the low inductance, high-voltage, high-current, high-coulomb transfer spark-gap switch needed for this application, 304 of which will be used in the Atlas capacitor bank. Because of the Marx module configuration, overall system inductance requirements and the need for a triggered switch, the design team initially selected the Maxwell Technologies railgap switch. The switch has been used in other high-voltage, high-current, high-coulomb transfer applications and would meet the Atlas facility requirements with some modifications. Testing of the Maxwell rail-gap switch under expected Atlas conditions is in progress. For the Atlas application, the rail-gap switch required some mechanical design modifications, which are discussed. Maxwell provided to modified switches for testing and evaluation. Results of this testing, before and after modifications, and inherent maintenance improvements to meet overall system reliability will be discussed.

Lopez, E.A.; Bennett, G.A.; Bartsch, R.R. [and others

1997-09-01T23:59:59.000Z

372

10 CFR 830 Major Modification Determination for Advanced Test Reactor LEU Fuel Conversion  

SciTech Connect

The Advanced Test Reactor (ATR), located in the ATR Complex of the Idaho National Laboratory (INL), was constructed in the 1960s for the purpose of irradiating reactor fuels and materials. Other irradiation services, such as radioisotope production, are also performed at ATR. The ATR is fueled with high-enriched uranium (HEU) matrix (UAlx) in an aluminum sandwich plate cladding. The National Nuclear Security Administration Global Threat Reduction Initiative (GTRI) strategic mission includes efforts to reduce and protect vulnerable nuclear and radiological material at civilian sites around the world. Converting research reactors from using HEU to low-enriched uranium (LEU) was originally started in 1978 as the Reduced Enrichment for Research and Test Reactors (RERTR) Program under the U.S. Department of Energy (DOE) Office of Science. Within this strategic mission, GTRI has three goals that provide a comprehensive approach to achieving this mission: The first goal, the driver for the modification that is the subject of this determination, is to convert research reactors from using HEU to LEU. Thus the mission of the ATR LEU Fuel Conversion Project is to convert the ATR and Advanced Test Reactor Critical facility (ATRC) (two of the six U.S. High-Performance Research Reactors [HPRR]) to LEU fuel by 2017. The major modification criteria evaluation of the project pre-conceptual design identified several issues that lead to the conclusion that the project is a major modification.

Boyd D. Christensen; Michael A. Lehto; Noel R. Duckwitz

2012-05-01T23:59:59.000Z

373

Effects of Surface Modification Conditions on Hydrophobicity of Silica-based Coating Additives  

SciTech Connect

Superhydrophobic silica (SHS) powders are being evaluated as a potential additive to the polyurethane topcoats used in Chemical Agent Resistant Coating (CARC) systems, with the goal of improving water repellency and corrosion protection characteristics. The current generation of CARC topcoats is already highly loaded with solids, and thus there is a premium on minimization of the total SHS powder required to achieve the desired properties. Therefore, efficient surface modification of the silica and proper dispersion in the coating will be required. The effect of a dispersant on the surface modification of silica particles by chlorosilanes was addressed in this study. The properties of various SHS powders were characterized by thermogravimetric analysis and mass spectroscopy. Correlations between powder modification conditions and the ultimate effects of the modified particles on hydrophobicity of CARC topcoats were assessed. The use of contact and rolling angle measurements along with scanning electron microscopy are discussed as they pertain to the ability to quantify the effects of modified silicas on corrosion prevention coatings. Furthermore, a systematic approach to modifying and testing both powders and top coats of corrosion prevention systems is presented.

Armstrong, Beth L [ORNL; Pawel, Steven J [ORNL; Hunter, Scott Robert [ORNL; Haynes, James A [ORNL; Hillesheim, Daniel A [ORNL

2013-01-01T23:59:59.000Z

374

File:05HIADrillingAndModificationOfWellsForInjectionUsePermit (1).pdf |  

Open Energy Info (EERE)

HIADrillingAndModificationOfWellsForInjectionUsePermit (1).pdf HIADrillingAndModificationOfWellsForInjectionUsePermit (1).pdf Jump to: navigation, search File File history File usage Metadata File:05HIADrillingAndModificationOfWellsForInjectionUsePermit (1).pdf Size of this preview: 463 × 599 pixels. Other resolution: 464 × 600 pixels. Full resolution ‎(1,275 × 1,650 pixels, file size: 33 KB, MIME type: application/pdf) File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment current 13:55, 12 July 2013 Thumbnail for version as of 13:55, 12 July 2013 1,275 × 1,650 (33 KB) Alevine (Talk | contribs) 13:12, 24 July 2012 Thumbnail for version as of 13:12, 24 July 2012 1,275 × 1,650 (26 KB) Alevine (Talk | contribs) You cannot overwrite this file. Edit this file using an external application (See the setup

375

Diffusion and Modification of Marine Aerosol Particles over the Coastal Areas in China: A Case Study Using a Single Particle Analysis  

Science Conference Proceedings (OSTI)

Aerosol particles over coastal areas are subject to the modification of chemical composition during their transport and diffusion. For examining the modification, individual aerosol particles of 0.1–2-?m radius were collected at Shengshan Island (...

Fang Li; Kikuo Okada

1999-01-01T23:59:59.000Z

376

Compressed Beamforming Applied to B-Mode Ultrasound Imaging  

E-Print Network (OSTI)

Emerging sonography techniques often imply increasing in the number of transducer elements involved in the imaging process. Consequently, larger amounts of data must be acquired and processed by the beamformer. The significant growth in the amounts of data effects both machinery size and power consumption. Within the classical sampling framework, state of the art systems reduce processing rates by exploiting the bandpass bandwidth of the detected signals. It has been recently shown, that a much more significant sample-rate reduction may be obtained, by treating ultrasound signals within the Finite Rate of Innovation framework. These ideas follow the spirit of Xampling, which combines classic methods from sampling theory with recent developments in Compressed Sensing. Applying such low-rate sampling schemes to individual transducer elements, which detect energy reflected from biological tissues, is limited by the noisy nature of the signals. This often results in erroneous parameter extraction, bringing forwar...

Wagner, Noam; Feuer, Arie; Friedman, Zvi

2012-01-01T23:59:59.000Z

377

NEPAREVIEW LAN-ll-0003 2. CATEGORICAL EXCLUSION BEING APPLIED:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NEPAREVIEW NEPAREVIEW LAN-ll-0003 2. CATEGORICAL EXCLUSION BEING APPLIED: 10 CFR 1021, Appendix B 6.8: Minor operational changes at an existing facility to minimize waste generation and for reuse of materials. These changes include, but are not limited to, adding filtration and recycle piping to allow reuse of machining oil, setting up a sorting area to improve process efficiency, and segregating two waste streams previously mingled and assigning new identification codes to the two resulting wastes. REGULATORY REQUIREMENTS IN 10 CFR 1021.410 (B): 1. The proposed action fits within a class of actions that is listed in Appendix B to Subpart D. For classes of actions listed in Appendix B, the following conditions are integral elements (Le., to fit within a class), the proposal must not:

378

Apply by March 31 for nontraditional student scholarship  

NLE Websites -- All DOE Office Websites (Extended Search)

Nontraditional student scholarship Nontraditional student scholarship Apply by March 31 for nontraditional student scholarship The scholarship will provide funds to employees or students pursuing a certificate, a two-year-degree, or a baccalaureate degree at NNMC. March 16, 2011 Nontraditional student scholarships Nontraditional student scholarships Contact Communications Office (505) 667-7000 LOS ALAMOS, New Mexico, March 16, 2011-Employees of Los Alamos National Laboratory or students working at the Laboratory who have interrupted their education and now want to obtain a degree from Northern New Mexico College (NNMC) have a chance to receive a $750 scholarship. The Christopher Montalvo/LANL Scholarship, offered through the NNMC Foundation, will provide funds to Lab employees or students pursuing a

379

Applying Risk Communication to the Transportation of Radioactive Materials  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Spokesperson Training 6/3/2010 Spokesperson Training 6/3/2010 May 2010 1 National Transportation Stakeholder Forum Chicago, Illinois May 2010 y May 2010 Page 1 Applying Risk Communication Principles Presented by: Ron Edmond Oak Ridge Institute for Science and Education May 2010 Page 2 Spokesperson Training 6/3/2010 May 2010 2 ï‚ž Participants should expect to gain the following skills: following skills: ï‚¡ How to recognize how the stakeholders prefer to receive information ï‚¡ How to integrate risk communication principles into individual communication ï‚¡ How to recognize the importance of earning trust and credibility y ï‚¡ How to identify stakeholders ï‚¡ How to answer questions using a variety of templates designed to keep messages focused May 2010 Page 3 The Chinese word for crisis contains two

380

Saving Energy in Data Centers - Applying Best Practices  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Saving Energy in Data Centers Saving Energy in Data Centers Applying Best Practices Dale Sartor, PE Building Technologies Applications Team Lawrence Berkeley National Laboratory (LBNL) Data Center Energy * Data centers are energy intensive facilities - 10 to 100+ times more energy intensive than other commercial space - Server racks now designed for more than 25+ kW - Surging demand for data storage - Typical facility ~ 1MW, can be > 20 MW - 1.5% of US Electricity consumption in 2006 - Projected to double in next 5 years * Significant data center building boom - Power and cooling constraints in existing facilities - Utility distribution constraints World Data Center Electricity Use - 2000 and 2005 Source: Koomey 2008 Source: Koomey 2008 LBNL Feels the Pain! 0 5 10 15 20 25 30 35 40 MegaWatts

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Nuclear safety as applied to space power reactor systems  

SciTech Connect

To develop a strategy for incorporating and demonstrating safety, it is necessary to enumerate the unique aspects of space power reactor systems from a safety standpoint. These features must be differentiated from terrestrial nuclear power plants so that our experience can be applied properly. Some ideas can then be developed on how safe designs can be achieved so that they are safe and perceived to be safe by the public. These ideas include operating only after achieving a stable orbit, developing an inherently safe design, ''designing'' in safety from the start and managing the system development (design) so that it is perceived safe. These and other ideas are explored further in this paper.

Cummings, G.E.

1987-01-01T23:59:59.000Z

382

GENERIC MODEL FOR MAGNETIC EXPLOSIONS APPLIED TO SOLAR FLARES  

Science Conference Proceedings (OSTI)

An accepted model for magnetospheric substorms is proposed as the basis for a generic model for magnetic explosions and is applied to solar flares. The model involves widely separated energy-release and particle-acceleration regions, with energy transported Alfvenically between them. On a global scale, these regions are coupled by a large-scale current that is set up during the explosion by redirection of pre-existing current associated with the stored magnetic energy. The explosion-related current is driven by an electromotive force (EMF) due to the changing magnetic flux enclosed by this current. The current path and the EMF are identified for an idealized quadrupolar model for a flare.

Melrose, D. B. [Sydney Institute for Astronomy, School of Physics, University of Sydney, NSW 2006 (Australia)

2012-04-10T23:59:59.000Z

383

Desiccant grain applied to the storage of solar drying potential  

Science Conference Proceedings (OSTI)

Sorption storage of solar heat using a layer of wheat as the desiccant was analyzed by means of a deep-bed model. Intended to be applied to solar-assisted in-storage drying of agricultural bulk materials, the probability of the persistence of unfavorable weather periods was quantified statistically for Potsdam for the month of August, as an example. Simulation results demonstrate that a relative humidity of the drying air of 65% can be maintained day and night for weeks without combustion of fossil fuels. Using a simple strategy of control, periods with insufficient solar radiation can be bridged over. The desiccant grain is not endangered by mold growth as a matter of principle. Simple solar air heaters can be used to avoid economic losses due to overdrying and to reduce the danger of decay to a minimum even at unfavorable climatic conditions.

Ziegler, T.; Richter, I.G.; Pecenka, R.

1999-09-01T23:59:59.000Z

384

Dynamic Decision Making for Graphical Models Applied to Oil Exploration  

E-Print Network (OSTI)

We present a framework for sequential decision making in problems described by graphical models. The setting is given by dependent discrete random variables with associated costs or revenues. In our examples, the dependent variables are the potential outcomes (oil, gas or dry) when drilling a petroleum well. The goal is to develop an optimal selection strategy that incorporates a chosen utility function within an approximated dynamic programming scheme. We propose and compare different approximations, from simple heuristics to more complex iterative schemes, and we discuss their computational properties. We apply our strategies to oil exploration over multiple prospects modeled by a directed acyclic graph, and to a reservoir drilling decision problem modeled by a Markov random field. The results show that the suggested strategies clearly improve the simpler intuitive constructions, and this is useful when selecting exploration policies.

Martinelli, Gabriele; Hauge, Ragnar

2012-01-01T23:59:59.000Z

385

Distributed control applied to combined electricity and natural gas infrastructures  

E-Print Network (OSTI)

Abstract — The optimization of combined electricity and natural gas systems is addressed in this paper. The two networks are connected via energy hubs. Using the energy hub concept, the interactions between the different infrastructures can be analyzed. A system consisting of several interconnected hubs forms a distributed power generation structure where each hub is controlled by its respective control agent. Recently, a distributed control method has been applied to such a system. The overall optimization problem including the entire system is decomposed into subproblems according to the control agents. In this paper, a parallel and serial version of that method is discussed. Simulation results are obtained through experiments on a three-hub benchmark system. I.

Michèle Arnold; Rudy R. Negenborn; Göran Andersson; Bart De Schutter

2008-01-01T23:59:59.000Z

386

Applied wind energy research at the National Wind Technology Center  

DOE Green Energy (OSTI)

Applied research activities at the National Wind Technology Center are divided into several technical disciplines. Not surprisingly, these engineering and science disciplines highlight the technology similarities between aircraft and wind turbine design requirements. More often than not, wind turbines are assumed to be a subset of the much larger and more comprehensive list of well understood aerospace engineering accomplishments and it is difficult for the general public to understand the poor performance history of wind turbines in sustained operation. Often overlooked are the severe environmental conditions and operational demands placed on turbine designs which define unique requirements beyond typical aerospace applications. It is the role of the National Wind Technology Center to investigate and quantify the underlying physical phenomena which make the wind turbine design problem unique and to provide the technology advancements necessary to overcome current operational limitations. This paper provides a brief overview of research areas involved with the design of wind turbines.

Robinson, M C; Tu, P

1996-06-01T23:59:59.000Z

387

AN ADVANCED TOOL FOR APPLIED INTEGRATED SAFETY MANAGEMENT  

SciTech Connect

WESKEM, LLC's Environmental, Safety and Health (ES&H) Department had previously assessed that a lack of consistency, poor communication and using antiquated communication tools could result in varying operating practices, as well as a failure to capture and disseminate appropriate Integrated Safety Management (ISM) information. To address these issues, the ES&H Department established an Activity Hazard Review (AHR)/Activity Hazard Analysis (AHA) process for systematically identifying, assessing, and controlling hazards associated with project work activities during work planning and execution. Depending on the scope of a project, information from field walkdowns and table-top meetings are collected on an AHR form. The AHA then documents the potential failure and consequence scenarios for a particular hazard. Also, the AHA recommends whether the type of mitigation appears appropriate or whether additional controls should be implemented. Since the application is web based, the information is captured into a single system and organized according to the >200 work activities already recorded in the database. Using the streamlined AHA method improved cycle time from over four hours to an average of one hour, allowing more time to analyze unique hazards and develop appropriate controls. Also, the enhanced configuration control created a readily available AHA library to research and utilize along with standardizing hazard analysis and control selection across four separate work sites located in Kentucky and Tennessee. The AHR/AHA system provides an applied example of how the ISM concept evolved into a standardized field-deployed tool yielding considerable efficiency gains in project planning and resource utilization. Employee safety is preserved through detailed planning that now requires only a portion of the time previously necessary. The available resources can then be applied to implementing appropriate engineering, administrative and personal protective equipment controls in the field.

Potts, T. Todd; Hylko, James M.; Douglas, Terence A.

2003-02-27T23:59:59.000Z

388

Radiological impact of phosphogypsum applied to soils under bahiagrass pasture  

SciTech Connect

Phosphogypsum (PG), a by-product in the manufacture of phosphoric acid, is primarily gypsum. The USEPA regulates the removal of PG from stacks because it contains {sup 226}Ra. Measures to quantify the transfer of radioactivity in PG to the agricultural environment are needed. The objective of the study was to collect data needed for assessment of the radiological impacts of PG applied to two Florida soils. Field experiments using 0,10, and 20 mg PG ha{sup {minus}1} were conducted for 2 yr at the University of Florida RCREC, Ona, FL. PG-attributable levels of {sup 226}Ra, {sup 210}Pb, and {sup 210}Po were observed in the top 5-cm layer of the soils. Surface {sup 222}Rn flux increased by 0.067 to 0.078 mBq m{sup {minus}2} s{sup {minus}1} per Mg PG ha{sup {minus}1}. Radionuclide concentrations in regrowth forages increased at one site where the first post-treatment rainfall did not occur until 20 d after PG application. In mature forages, radionuclide levels generally increased with PG in both soils. No effects on radionuclide levels in subsurface water down to 90 cm and only slight effects on gamma radiation and on airborne {sup 222}Rn measured 1 m from the ground were noted. The linear regression slope for a radiological parameter normalized with respect to the pertinent radionuclide applied per m{sup 2} per Mg PG ha{sup {minus}1} is proposed as the transfer factor (TF) of that radionuclide in PG to the agricultural medium in terms of that parameter. The TF permits the calculation of the potential effect on certain radiological parameters of PGs containing different radionuclide concentrations from the one used in this study.

Alcordo, I.S.; Rechcigl, J.E.; Roessler, C.E.; Littell, R.C.

1999-10-01T23:59:59.000Z

389

CX-006289: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

289: Categorical Exclusion Determination 289: Categorical Exclusion Determination CX-006289: Categorical Exclusion Determination Willow Creek Substation -Transformer Replacement and Substation Modifications CX(s) Applied: B4.6 Date: 07/26/2011 Location(s): Grand County, Colorado Office(s): Western Area Power Administration-Rocky Mountain Region Western Area Power Administration (Western) proposes to make modifications to the Willow Creek Substation, near Grand Lake, Grand County, Colorado. The project includes removing two existing transformers and replacing them with one larger transformer. DOCUMENT(S) AVAILABLE FOR DOWNLOAD CX-006289.pdf More Documents & Publications CX-009235: Categorical Exclusion Determination CX-006280: Categorical Exclusion Determination EIS-0400: Draft Environmental Impact Statement

390

CX-000147: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Galloway's Rooftop Heating, Ventilating, and Air Conditioning Unit Replacement, Boiler Replacement, Lighting Upgrade CX(s) Applied:...

391

CX-006453: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination CX-006453: Categorical Exclusion Determination Geothermal Incentive Program - Matunaliec Residence geothermal (Deercliff Road) CX(s) Applied:...

392

Characterization of Ice Crystals in Clouds by Simple Mathematical Expressions Based on Successive Modification of Simple Shapes  

Science Conference Proceedings (OSTI)

The technique based on the concept of successive modification of simple shapes using elementary mathematical functions to represent the shape and size of ice crystals in clouds is discussed. Two hypothetical samples of ice crystals, a single-...

Pao K. Wang

1997-08-01T23:59:59.000Z

393

Biological conversion of biomass to methane. Quarterly progress report, June 1--August 30, 1976. [Contract modification and equipment receipt  

DOE Green Energy (OSTI)

Two contract modifications (one to study the effect of reactor design on bioconversion efficiency and the other to study the effects of variable speed mixing) are reported. All equipment has now been obtained, but installation is not complete. (JSR)

Pfeffer, J T

1976-09-01T23:59:59.000Z

394

Urban Modifications in a Mesoscale Meteorological Model and the Effects on Near-Surface Variables in an Arid Metropolitan Region  

Science Conference Proceedings (OSTI)

A refined land cover classification for the arid Phoenix (Arizona) metropolitan area and some simple modifications to the surface energetics were introduced in the fifth-generation Pennsylvania State University–National Center for Atmospheric ...

Susanne Grossman-Clarke; Joseph A. Zehnder; William L. Stefanov; Yubao Liu; Michael A. Zoldak

2005-09-01T23:59:59.000Z

395

Distribution and Modification of North Pacific Intermediate Water around the Subarctic Frontal Zone East of 150°E  

Science Conference Proceedings (OSTI)

Modification and distribution of North Pacific Intermediate Water (NPIW) in the area north of 30°N and east of 150°E are discussed based on an isopycnal particle tracking experiment with the velocity field estimated from a ?-spiral inverse method ...

Masachika Masujima; Ichiro Yasuda

2009-06-01T23:59:59.000Z

396

Total Risk Approach in Applying PRA to Criticality Safety  

SciTech Connect

As nuclear industry continues marching from an expert-base support to more procedure-base support, it is important to revisit the total risk concept to criticality safety. A key objective of criticality safety is to minimize total criticality accident risk. The purpose of this paper is to assess key constituents of total risk concept pertaining to criticality safety from an operations support perspective and to suggest a risk-informed means of utilizing criticality safety resources for minimizing total risk. A PRA methodology was used to assist this assessment. The criticality accident history was assessed to provide a framework for our evaluation. In supporting operations, the work of criticality safety engineers ranges from knowing the scope and configurations of a proposed operation, performing criticality hazards assessment to derive effective controls, assisting in training operators, response to floor questions, surveillance to ensure implementation of criticality controls, and response to criticality mishaps. In a compliance environment, the resource of criticality safety engineers is increasingly being directed towards tedious documentation effort to meet some regulatory requirements to the effect of weakening the floor support for criticality safety. By applying a fault tree model to identify the major contributors of criticality accidents, a total risk picture is obtained to address relative merits of various actions. Overall, human failure is the key culprit in causing criticality accidents. Factors such as failure to follow procedures, lacks of training, lack of expert support at the floor level etc. are main contributors. Other causes may include lack of effective criticality controls such as inadequate criticality safety evaluation. Not all of the causes are equally important in contributing to criticality mishaps. Applying the limited resources to strengthen the weak links would reduce risk more than continuing emphasis on the strong links of criticality safety support. For example, some compliance failures such as lack of detailed documentation may not be as relevant as the lack of floor support in answering operator's questions during operations. Misuse of resources in reducing lesser causes rather than on major causes of criticality accidents is not risk free without severe consequences. A regulatory mandate without due consideration of total risk may have its opposite effect of increasing the total risk of an accident. A lesson is to be learned here. For regulatory standard/guide development, use of ANS/ANSI standard process, which provides the pedigree of consensus participation, is recommended.

Huang, S T

2005-03-24T23:59:59.000Z

397

Funded Projects NEPA Does Not Apply Categorical Exclusions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 30, 2010 June 30, 2010 Page 1 # of ARRA Funded Projects NEPA Does Not Apply Categorical Exclusions (CE) CE Pending CE Done Environmental Assessments (EA) EA Pending EA Done Environmental Impact Statements (EIS) EIS Pending EIS Done All NEPA Actions All Withdrawn Actions All Pending NEPA Actions All Completed NEPA Actions OVERALL TOTALS: 215,159 4,240 175,498 821 174,677 9,808 749 9,059 829 36 793 186,135 1,403 1,606 184,529 Department of Agriculture (USDA): 132,570 254 93,586 37 93,549 1,303 3 1,300 150 0 150 95,039 110 40 94,999 Agricultural Research Service (ARS) 41 2 38 0 38 1 0 1 0 0 0 39 0 0 39 Farm Service Agency (FSA) 38,592 0 4 0 4 0 0 0 0 0 0 4 0 0 4 Food and Nutrition Service (FNS) 251 0 4 0 4 0 0 0 0 0 0 4 0 0 4 Foreign Agricultural Service (FAS) 3 0 3 0 3 0 0 0 0 0 0 3 0 0 3 U.S. Forest Service (USFS) 705 252 1,408 2 1,406 533 1 532 121 0 121 2,062 8 3 2,059 Natural Resources Conservation Service (NRCS)

398

Funded Projects NEPA Does Not Apply Categorical Exclusions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 31, 2010 December 31, 2010 Page 1 # of ARRA Funded Projects NEPA Does Not Apply Categorical Exclusions (CE) CE Pending CE Done Environmental Assessments (EA) EA Pending EA Done Environmental Impact Statements (EIS) EIS Pending EIS Done All NEPA Actions All Withdrawn Actions All Pending NEPA Actions All Completed NEPA Actions OVERALL TOTALS: 272,037 4,289 181,061 190 180,871 6,978 362 6,616 870 35 835 188,909 1,674 589 188,322 Department of Agriculture (USDA): 184,065 254 96,907 9 96,898 1,508 0 1,508 150 0 150 98,565 254 9 98,556 Agricultural Research Service (ARS) 41 2 38 0 38 1 0 1 0 0 0 39 0 0 39 Farm Service Agency (FSA) 86,564 0 4 0 4 0 0 0 0 0 0 4 0 0 4 Food and Nutrition Service (FNS) 251 0 4 0 4 0 0 0 0 0 0 4 0 0 4 Foreign Agricultural Service (FAS) 3 0 4 0 4 0 0 0 0 0 0 4 0 0 4 U.S. Forest Service (USFS) 705 252 1,408 0 1,408 533 0 533 121 0 121 2,062 8 0 2,062 Natural Resources Conservation Service (NRCS)

399

A Hygrothermal Risk Analysis Applied to Residential Unvented Attics  

SciTech Connect

Aresidential building, constructed with an unvented attic, is acommonroof assembly in the United States.The expected hygrothermal performance and service life of the roof are difficult to estimate due to a number of varying parameters.Typical parameters expected to vary are the climate, direction, and slope of the roof as well as the radiation properties of the surface material. Furthermore, influential parameters are indoor moisture excess, air leakages through the attic floor, and leakages from air-handling unit and ventilation ducts. In addition, the type of building materials such as the insulation material and closed or open cell spray polyurethane foam will influence the future performance of the roof. A development of a simulation model of the roof assembly will enable a risk and sensitivity analysis, in which the most important varying parameters on the hygrothermal performance can be determined. The model is designed to perform probabilistic simulations using mathematical and hygrothermal calculation tools. The varying input parameters can be chosen from existing measurements, simulations, or standards. An analysis is applied to determine the risk of consequences, such as mold growth, rot, or energy demand of the HVAC unit. Furthermore, the future performance of the roof can be simulated in different climates to facilitate the design of an efficient and reliable roof construction with the most suitable technical solution and to determine the most appropriate building materials for a given climate

Pallin, Simon B [ORNL] [ORNL; Kehrer, Manfred [ORNL] [ORNL

2013-01-01T23:59:59.000Z

400

Applying a Modified Triad Approach to Investigate Wastewater lines  

Science Conference Proceedings (OSTI)

Approximately 20 miles of wastewater lines are below grade at an active military Base. This piping network feeds or fed domestic or industrial wastewater treatment plants on the Base. Past wastewater line investigations indicated potential contaminant releases to soil and groundwater. Further environmental assessment was recommended to characterize the lines because of possible releases. A Remedial Investigation (RI) using random sampling or use of sampling points spaced at predetermined distances along the entire length of the wastewater lines, however, would be inefficient and cost prohibitive. To accomplish RI goals efficiently and within budget, a modified Triad approach was used to design a defensible sampling and analysis plan and perform the investigation. The RI task was successfully executed and resulted in a reduced fieldwork schedule, and sampling and analytical costs. Results indicated that no major releases occurred at the biased sampling points. It was reasonably extrapolated that since releases did not occur at the most likely locations, then the entire length of a particular wastewater line segment was unlikely to have contaminated soil or groundwater and was recommended for no further action. A determination of no further action was recommended for the majority of the waste lines after completing the investigation. The modified Triad approach was successful and a similar approach could be applied to investigate wastewater lines on other United States Department of Defense or Department of Energy facilities. (authors)

Pawlowicz, R.; Urizar, L. [Bechtel National, Inc., 1230 Columbia St., Suite 400, San Diego, CA 92101 (United States); Blanchard, S. [Brown and Caldwell, 9665 Chesapeake Drive, Suite 201, San Diego, CA 92123 (United States); Jacobsen, K. [Naval Facilities Engineering Command, Southwest 1220 Pacific Highway, San Diego, CA 92132 (United States); Scholfield, J. [EarthTech, 841 Bishop St., Suite 500, Honolulu, HI 96813 (United States)

2006-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Predicting plant available nitrogen in land-applied biosolids  

Science Conference Proceedings (OSTI)

The rate at which biosolids (municipal sewage sludge) may be applied to land is dependent on factors including concentrations of metals, pathogens, toxic organic compounds, and nutrients. Where other properties are not limiting, land application rates are often based on matching crop N needs with the plant available N (PAN). The objectives of this study were to quantify biosolids PAN under field conditions and to propose methods including computer simulation to estimate biosolids PAN in a land application program. Six biosolids were evaluated over a 2-yr period. Laboratory incubations were used to obtain decomposition kinetics. Field studies provided a relationship between inorganic fertilizer N rate and sorghum sudangrass [Sorghum bicolor (L.) Moench] tissue N concentration, which was used to determine biosolids PAN in a Captina silt loam soil. Biosolids PAN released during the field experiment was linearly related to biosolids C/N ratio, organic N, or total N. Computer model predictions of PAN in the field were also linearly related to field estimates of biosolids PAN. Decay series obtained using the computer model, average biosolids decomposition kinetics, and average application site weather were very similar to decay series obtained using the computer model, actual weather, and kinetic data. Either decay series and routine analytical data for biosolids are proposed to estimate PAN for a given situation. Use of the computer model and weather data makes the approach site-specific, while analytical data for a specific biosolids makes the approach biosolids-specific.

Gilmour, J.T.; Skinner, V.

1999-08-01T23:59:59.000Z

402

Retrocommissioning Case Study - Applying Building Selection Criteria for Maximum Results  

E-Print Network (OSTI)

Commissioning of existing buildings, or “retrocommissioning” is a systematic process to identify operational and maintenance (O&M) improvements that optimize building performance and ensure that building systems function together efficiently and effectively (Haasl, Sharp 1999). This paper presents a case study of a utility-funded retrocommissioning evaluation on a 125,000 SF office facility in La Mesa, California. The commissioning process consisted of site visits, interviews with facility staff, data collection and analysis, recommendation of energy conservation measures, and verification of savings. The study identified 13 deficiencies and recommended a suite of three O&M measures, one capital improvement measure and five other measures. The measures selected and implemented by the owner resulted in annual projected savings of 238,000 kWh (9.9%) and utility cost savings of $20,000 (6.9%)1, with a simple payback of 0.7 years. The project also demonstrated the value of applying rigorous building selection criteria to obtain cost-effective results. This paper profiles the project and discusses lesson learned.

Luskay, L.; Haasl, T.; Irvine, L.; Frey, D.

2002-01-01T23:59:59.000Z

403

1) Apply directly to the department in which you want to pursue a PhD  

E-Print Network (OSTI)

1) Apply directly to the department in which you want to pursue apply directly to the I- WATER program. Download and complete our application

404

10 CFR 830 Major Modification Determination for Emergency Firewater Injection System Replacement  

SciTech Connect

The continued safe and reliable operation of the ATR is critical to the Department of Energy (DOE) Office of Nuclear Energy (NE) mission. While ATR is safely fulfilling current mission requirements, a variety of aging and obsolescence issues challenge ATR engineering and maintenance personnel’s capability to sustain ATR over the long term. First documented in a series of independent assessments, beginning with an OA Environmental Safety and Health Assessment conducted in 2003, the issues were validated in a detailed Material Condition Assessment (MCA) conducted as a part of the ATR Life Extension Program in 2007.Accordingly, near term replacement of aging and obsolescent original ATR equipment has become important to ensure ATR capability in support of NE’s long term national missions. To that end, a mission needs statement has been prepared for a non-major system acquisition which is comprised of three interdependent sub-projects. The first project will replace the existent diesel-electrical bus (E-3), switchgear, and the fifty year old antiquated marine diesels with commercial power that is backed with safety-related emergency diesel generators (EDGs), switchgear, and uninterruptible power supply. The second project will replace the four, obsolete, original primary coolant pumps and motors. The third project, the subject of this major modification determination, will replace the current emergency firewater injection system (EFIS). The replacement water injection system will function as the primary emergency water injection system with the EFIS being retained as a defense-in-depth backup. Completion of this and the two other age-related projects (replacement of the ATR diesel bus (E-3) and switchgear and replacement of the existent aged primary coolant pumps and motors) will resolve major age-related operational issues plus make a significant contribution in sustaining the ATR safety and reliability profile. The major modification criteria evaluation of the project pre-conceptual design identified several issues that lead to the conclusion that the project is a major modification.

Noel Duckwitz

2011-05-01T23:59:59.000Z

405

10 CFR 830 Major Modification Determination for Advanced Test Reactor RDAS and LPCIS Replacement  

SciTech Connect

The replacement of the ATR Control Complex's obsolete computer based Reactor Data Acquisition System (RDAS) and its safety-related Lobe Power Calculation and Indication System (LPCIS) software application is vitally important to ensure the ATR remains available to support this national mission. The RDAS supports safe operation of the reactor by providing 'real-time' plant status information (indications and alarms) for use by the reactor operators via the Console Display System (CDS). The RDAS is a computer support system that acquires analog and digital information from various reactor and reactor support systems. The RDAS information is used to display quadrant and lobe powers via a display interface more user friendly than that provided by the recorders and the Control Room upright panels. RDAS provides input to the Nuclear Engineering ATR Surveillance Data System (ASUDAS) for fuel burn-up analysis and the production of cycle data for experiment sponsors and the generation of the Core Safety Assurance Package (CSAP). RDAS also archives and provides for retrieval of historical plant data which may be used for event reconstruction, data analysis, training and safety analysis. The RDAS, LPCIS and ASUDAS need to be replaced with state-of-the-art technology in order to eliminate problems of aged computer systems, and difficulty in obtaining software upgrades, spare parts, and technical support. The major modification criteria evaluation of the project design did not lead to the conclusion that the project is a major modification. The negative major modification determination is driven by the fact that the project requires a one-for-one equivalent replacement of existing systems that protects and maintains functional and operational requirements as credited in the safety basis.

David E. Korns

2012-05-01T23:59:59.000Z

406

Elastic incompatibility stresses across planar and nonplanar grain boundaries in silver, aluminum, and zirconium applied to ductile fracture criteria under high triaxial stress  

Science Conference Proceedings (OSTI)

Grain boundaries in a polycrystal imply elastic incompatibilities that can lead to stress states in the vicinity of the interface that are different from the macroscopic or applied stresses because the single crystal elastic properties are not all isotropic. This phenomenon is important as mechanical processes may operate at the microscopic level that would not be predicted based on the macroscopic stress state. This phenomenon has not been widely examined. One of the few studies that examined the level of stress- state modification on copper determined that slip or plasticity in cyclically deformed copper occurred in areas with high elastic incompatibility stresses. The focus of the present study is the unstable growth of cavities as a result of high local triaxial stress. Grain boundaries in silver, aluminum, and zirconium are examined.

Roehnelt, R.; Kassner, M.E.; Kennedy, T.C. [Oregon State Univ., Corvallis, OR (United States); Rosen, R.S. [Lawrence Livermore National Lab., CA (United States)

1996-07-01T23:59:59.000Z

407

Modification and implementation of the M. E. T. C. SIMPAC program  

DOE Green Energy (OSTI)

The work reported in this study covers the modifications performed by PTTS in the three dimensional unsteady state model developed by the Morgantown Energy Technology Center by W. K. Sawyer and J. C. Mercer, A Diffusivity Model for Fluid Flow and Heat Conduction in Porous Media (Merc/SP-77/2), August 1978, United States Department of Energy, Morgantown Energy Technology Center (M.E.T.C.), Morgantown, West Virginia. The model is used to simulate a liquid dominated geothermal reservoir system. A series of cases is cited showing the versatility of the model as a simulation tool.

Not Available

1980-05-01T23:59:59.000Z

408

Procedure for developing biological input for the design, location, or modification of water-intake structures  

Science Conference Proceedings (OSTI)

To minimize adverse impact on aquatic ecosystems resulting from the operation of water intake structures, design engineers must have relevant information on the behavior, physiology and ecology of local fish and shellfish. Identification of stimulus/response relationships and the environmental factors that influence them is the first step in incorporating biological information in the design, location or modification of water intake structures. A procedure is presented in this document for providing biological input to engineers who are designing, locating or modifying a water intake structure. The authors discuss sources of stimuli at water intakes, historical approaches in assessing potential/actual impact and review biological information needed for intake design.

Neitzel, D.A.; McKenzie, D.H.

1981-12-01T23:59:59.000Z

409

Comment about constraints on nanometer-range modifications to gravity from low-energy neutron experiments  

E-Print Network (OSTI)

A topic of present interest is the application of experimentally observed quantum mechanical levels of ultra-cold neutrons in the earth's gravitational field for searching short-range modifications to gravity. A constraint on new forces in the nanometer-range published by Nesvizhevsky and Protasov follows from inadequate modelling of the interaction potential of a neutron with a mirror wall. Limits by many orders of magnitude better were already derived long ago from the consistency of experiments on the neutron-electron interaction.

O. Zimmer; N. Kaiser

2006-02-14T23:59:59.000Z

410

Understanding the Role of O-GlcNAc Modifications in Plant Development  

Science Conference Proceedings (OSTI)

This project has contributed towards understanding the role of O-GlcNAc (O-linked N-acetylglucosamine) transferases (OGTs) in plants. Through analyses of single and double mutants, we have investigated the unique and overlapping functions of SECRET AGENT (SEC) and SPINDLY (SPY), the arabidopsis OGTs. This work showed that SEC functions as negative regulators of the long-day flowering pathway. SEC also has a positive role in regulation of rosette. An E. coli co-expression system that allows potential substrates to be co-expressed with and O-GlcNAc modified by SEC was developed. We showed that SEC is a bona fide OGT that modifies itself with single O-linked GlcNAc(s). Using this system, we tested a number of proteins that were hypothesized to be substrates of SEC and identified a number of substrates include GIGANTEA (GI), a component of the long day flowering pathway. The hypothesis that O-GlcNAc modification controls GI activity was tested by first mapping where E. coli-expressed SEC modifies GI and then assessing the activity of a non-modifiable mutant form of GI. The activity of the mutant form of GI was indistinguishable from that of wild type suggesting that either O-GlcNAc does not regulate GI activity or that additional modification sites exist on GI. In collaboration with Dr. Juan Antonio Garcia at Universidad Autónoma de Madrid the role of O-GlcNAc modification of the plum pox virus coat protein (PPV-CP) was investigated. SEC was shown to O-GlcNAc modify PPV-CP and the modification was shown to facilitate the infection process. E. coli-expressed SEC was shown to modify the same PPV-CP sites that are modified in plants. SEC has a large protein interaction domain called the TPR domain that has been hypothesized to have a role in determining the substrate specificity of the enzyme and/or to regulate its activity. A mutational analysis of the TPR domain did not find evidence for a role in substrate specificity but did obtain evidence that the domain regulates enzyme activity.

Olszewski, Neil, E.

2011-06-16T23:59:59.000Z

411

Planning for coordinated space and ground-based ionospheric modification experiments  

SciTech Connect

The planning and conducting of coordinated space and ground-based ionospheric modification experiments are discussed. The purpose of these experiments is to investigate (1) the nonlinear VLF wave interaction with the ionospheric plasmas, and (2) the nonlinear propagation of VLF waves in the HF-modified ionosphere. It is expected that the HY-induced ionospheric density striations can render the nonlinear mode conversion of VLF waves into lower hybrid waves. Lower hybrid waves can also be excited parametrically by the VLF waves in the absence of the density striations if the VLF waves are intense enough. Laboratory experiments are planned for crosschecking the results obtained from the field experiments.

Lee, M.C.

1990-10-01T23:59:59.000Z

412

Sensitivity and uncertainty analysis applied to the JHR reactivity prediction  

SciTech Connect

The on-going AMMON program in EOLE reactor at CEA Cadarache (France) provides experimental results to qualify the HORUS-3D/N neutronics calculation scheme used for the design and safety studies of the new Material Testing Jules Horowitz Reactor (JHR). This paper presents the determination of technological and nuclear data uncertainties on the core reactivity and the propagation of the latter from the AMMON experiment to JHR. The technological uncertainty propagation was performed with a direct perturbation methodology using the 3D French stochastic code TRIPOLI4 and a statistical methodology using the 2D French deterministic code APOLLO2-MOC which leads to a value of 289 pcm (1{sigma}). The Nuclear Data uncertainty propagation relies on a sensitivity study on the main isotopes and the use of a retroactive marginalization method applied to the JEFF 3.1.1 {sup 27}Al evaluation in order to obtain a realistic multi-group covariance matrix associated with the considered evaluation. This nuclear data uncertainty propagation leads to a K{sub eff} uncertainty of 624 pcm for the JHR core and 684 pcm for the AMMON reference configuration core. Finally, transposition and reduction of the prior uncertainty were made using the Representativity method which demonstrates the similarity of the AMMON experiment with JHR (the representativity factor is 0.95). The final impact of JEFF 3.1.1 nuclear data on the Begin Of Life (BOL) JHR reactivity calculated by the HORUS-3D/N V4.0 is a bias of +216 pcm with an associated posterior uncertainty of 304 pcm (1{sigma}). (authors)

Leray, O.; Vaglio-Gaudard, C.; Hudelot, J. P.; Santamarina, A.; Noguere, G. [CEA, DER, SPRC, F-13108 St Paul-Lez-Durance (France); Di-Salvo, J. [CEA, DER, SPEx, F-13108 St Paul-Lez-Durance (France)

2012-07-01T23:59:59.000Z

413

A Bidirectional Coupling Procedure Applied to Multiscale Respiratory Modeling  

SciTech Connect

In this study, we present a novel multiscale computational framework for efficiently linking multiple lower-dimensional models describing the distal lung mechanics to imaging-based 3D computational fluid dynamics (CFD) models of the upper pulmonary airways in order to incorporate physiologically appropriate outlet boundary conditions. The framework is an extension of the Modified Newton’s Method with nonlinear Krylov accelerator developed by Carlson and Miller [1, 2, 3]. Our extensions include the retention of subspace information over multiple timesteps, and a special correction at the end of a timestep that allows for corrections to be accepted with verified low residual with as little as a single residual evaluation per timestep on average. In the case of a single residual evaluation per timestep, the method has zero additional computational cost compared to uncoupled or unidirectionally coupled simulations. We expect these enhancements to be generally applicable to other multiscale coupling applications where timestepping occurs. In addition we have developed a “pressure-drop” residual which allows for stable coupling of flows between a 3D incompressible CFD application and another (lower-dimensional) fluid system. We expect this residual to also be useful for coupling non-respiratory incompressible fluid applications, such as multiscale simulations involving blood flow. The lower-dimensional models that are considered in this study are sets of simple ordinary differential equations (ODEs) representing the compliant mechanics of symmetric human pulmonary airway trees. To validate the method, we compare the predictions of hybrid CFD-ODE models against an ODE-only model of pulmonary airflow in an idealized geometry. Subsequently, we couple multiple sets of ODEs describing the distal lung to an imaging-based human lung geometry. Boundary conditions in these models consist of atmospheric pressure at the mouth and intrapleural pressure applied to the multiple sets of ODEs. In both the simplified geometry and in the imaging-based geometry, the performance of the method was comparable to that of monolithic schemes, in most cases requiring only a single CFD evaluation per time step. Thus, this new accelerator allows us to begin combining pulmonary CFD models with lower-dimensional models of pulmonary mechanics with little computational overhead. Moreover, because the CFD and lower-dimensional models are totally separate, this framework affords great flexibility in terms of the type and breadth of the adopted lower-dimensional model, allowing the biomedical researcher to appropriately focus on model design. Research funded by the National Heart Lung and Blood Institute Award 1RO1HL073598.

Kuprat, Andrew P.; Kabilan, Senthil; Carson, James P.; Corley, Richard A.; Einstein, Daniel R.

2013-07-01T23:59:59.000Z

414

X JNTRACT 10 CODE PAGE OF PAGES AMENDMENT OF SOLICITATt-.. 4/MODIFICATION OF CONTRACT  

NLE Websites -- All DOE Office Websites (Extended Search)

.< .< JNTRACT 10 CODE PAGE OF PAGES AMENDMENT OF SOLICITATt-.. 4/MODIFICATION OF CONTRACT 1 I 2 2. AMENDMENTIMODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISmONIPURCHASE REQ NO. S. PROJECT NO. (If sppf"teable) AOO3 See Block 16C. N/A Below 09CH11469.007 6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) Code I U.S. Department of Energy ·Chicago Office Office of Science ·9800 South Cass Avenue Argonne,IL 60439 9A AMENDMENT OF SOLICITATION NO. 8. NAME AND ADDRESS OF CONTRACTOR (No. street county, State and ZIP Code) W!1. Spectra 1ech, Inc. 9.B. DATED (SEE ITEM 11) 132 Jefferson Court Oak Ridge,TN 37830 fOA MODIFICATION OF ContractlOrder NO. V' DE-AC02-09CH11469· 10.B. DATED (SEE ITEM 13) Nqvember 13, 2008 CODE N/A . IFACILlTY.CODE N/A

415

Laser engineered net shaping (LENS) for the repair and modification of NWC metal components.  

DOE Green Energy (OSTI)

Laser Engineered Net Shaping{trademark} (LENS{reg_sign}) is a layer additive manufacturing process that creates fully dense metal components using a laser, metal powder, and a computer solid model. This process has previously been utilized in research settings to create metal components and new material alloys. The ''Qualification of LENS for the Repair and Modification of Metal NWC Components'' project team has completed a Technology Investment project to investigate the use of LENS for repair of high rigor components. The team submitted components from four NWC sites for repair or modification using the LENS process. These components were then evaluated for their compatibility to high rigor weapons applications. The repairs included hole filling, replacement of weld lips, addition of step joints, and repair of surface flaws and gouges. The parts were evaluated for mechanical properties, corrosion resistance, weldability, and hydrogen compatibility. This document is a record of the LENS processing of each of these component types and includes process parameters, build strategies, and lessons learned. Through this project, the LENS process was shown to successfully repair or modify metal NWC components.

Atwood, Clinton J.; Smugeresky, John E. (Sandia National Labs, Livermore,CA); Gill, David Dennis

2006-11-01T23:59:59.000Z

416

Proceedings of the conference on coastal erosion and wetland modification in Louisiana: causes, consequences, and options  

Science Conference Proceedings (OSTI)

Sixteen papers and panel discussions from a conference held in Baton Rouge, LA, 5 to 6 October 1981 are presented. The presentations consider the causes and consequences of coastal erosion and wetland modification in Louisiana and the mitigative options available to slow or reverse the rapid rate of coastal land loss. Detailed habitat mapping studies have allowed accurate estimates of coastal habitat change and land loss through 1978. Projections from these rates of change indicate an annual rate of land loss in coastal Louisiana in the early 1980's of approximately 130 km/sup 2//y (50 m/sup 2//y). The projected effects of wetland modification on the bountiful living resources of coastal Louisiana (fisheries, fur and hide bearers and waterfowl) are major because of the close dependence of these resources on estuarine wetlands. These changes and others related to flood protection, transportation and ownership of mineral resources are projected to have extensive social and economic consequences. Options proposed to slow coastal land loss include major and minor diversions of the Mississippi River, barrier island and shoreline restoration and protection, hydrological management of wetlands and more restrictive permitting of dredging activities.

Boesch, D.F. (ed.)

1982-09-01T23:59:59.000Z

417

Trends in Yield and Azimuthal Shape Modification in Dihadron Correlations in Relativistic Heavy Ion Collisions  

E-Print Network (OSTI)

Fast parton probes produced by hard scattering and embedded within collisions of large nuclei have shown that partons suffer large energy loss and that the produced medium may respond collectively to the lost energy. We present measurements of neutral pion trigger particles at transverse momenta p^t_T = 4-12 GeV/c and associated charged hadrons (p^a_T = 0.5-7 GeV/c) as a function of relative azimuthal angle Delta Phi at midrapidity in Au+Au and p+p collisions at sqrt(s_NN) = 200 GeV. These data lead to two major observations. First, the relative angular distribution of low momentum hadrons, whose shape modification has been interpreted as a medium response to parton energy loss, is found to be modified only for p^t_T < 7 GeV/c. At higher p^t_T, the data are consistent with unmodified or very weakly modified shapes, even for the lowest measured p^a_T. This observation presents a quantitative challenge to medium response scenarios. Second, the associated yield of hadrons opposite to the trigger particle in Au+Au relative to that in p+p (I_AA) is found to be suppressed at large momentum (IAA ~ 0.35-0.5), but less than the single particle nuclear modification factor (R_AA ~0.2).

A. Adare; S. Afanasiev; C. Aidala; N. N. Ajitanand; Y. Akiba; H. Al-Bataineh; J. Alexander; T. Alho; K. Aoki; L. Aphecetche; Y. Aramaki; J. Asai; E. T. Atomssa; R. Averbeck; T. C. Awes; B. Azmoun; V. Babintsev; M. Bai; G. Baksay; L. Baksay; A. Baldisseri; K. N. Barish; P. D. Barnes; B. Bassalleck; A. T. Basye; S. Bathe; S. Batsouli; V. Baublis; C. Baumann; A. Bazilevsky; S. Belikov; R. Belmont; R. Bennett; A. Berdnikov; Y. Berdnikov; A. A. Bickley; J. G. Boissevain; J. S. Bok; H. Borel; K. Boyle; M. L. Brooks; H. Buesching; V. Bumazhnov; G. Bunce; S. Butsyk; C. M. Camacho; S. Campbell; B. S. Chang; W. C. Chang; J. -L. Charvet; C. -H. Chen; S. Chernichenko; C. Y. Chi; M. Chiu; I. J. Choi; R. K. Choudhury; P. Christiansen; T. Chujo; P. Chung; A. Churyn; O. Chvala; V. Cianciolo; Z. Citron; B. A. Cole; M. Connors; P. Constantin; M. Csanád; T. Csörg?; T. Dahms; S. Dairaku; I. Danchev; K. Das; A. Datta; G. David; A. Denisov; D. d'Enterria; A. Deshpande; E. J. Desmond; O. Dietzsch; A. Dion; M. Donadelli; O. Drapier; A. Drees; K. A. Drees; A. K. Dubey; M. Durham; A. Durum; D. Dutta; V. Dzhordzhadze; S. Edwards; Y. V. Efremenko; F. Ellinghaus; T. Engelmore; A. Enokizono; H. En'yo; S. Esumi; K. O. Eyser; B. Fadem; D. E. Fields; M. Finger; \\, Jr.; M. Finger; F. Fleuret; S. L. Fokin; Z. Fraenkel; J. E. Frantz; A. Franz; A. D. Frawley; K. Fujiwara; Y. Fukao; T. Fusayasu; I. Garishvili; A. Glenn; H. Gong; M. Gonin; J. Gosset; Y. Goto; R. Granier de Cassagnac; N. Grau; S. V. Greene; M. Grosse Perdekamp; T. Gunji; H. -Å. Gustafsson; A. Hadj Henni; J. S. Haggerty; I. Hahn; H. Hamagaki; J. Hamblen; J. Hanks; R. Han; E. P. Hartouni; K. Haruna; E. Haslum; R. Hayano; M. Heffner; S. Hegyi; T. K. Hemmick; T. Hester; X. He; J. C. Hill; M. Hohlmann; W. Holzmann; K. Homma; B. Hong; T. Horaguchi; D. Hornback; S. Huang; T. Ichihara; R. Ichimiya; J. Ide; Y. Ikeda; K. Imai; J. Imrek; M. Inaba; D. Isenhower; M. Ishihara; T. Isobe; M. Issah; A. Isupov; D. Ivanischev; B. V. Jacak; J. Jia; J. Jin; B. M. Johnson; K. S. Joo; D. Jouan; D. S. Jumper; F. Kajihara; S. Kametani; N. Kamihara; J. Kamin; J. H. Kang; J. Kapustinsky; D. Kawall; M. Kawashima; A. V. Kazantsev; T. Kempel; A. Khanzadeev; K. M. Kijima; J. Kikuchi; B. I. Kim; D. H. Kim; D. J. Kim; E. -J. Kim; E. Kim; S. H. Kim; Y. J. Kim; E. Kinney; K. Kiriluk; A. Kiss; E. Kistenev; J. Klay; C. Klein-Boesing; L. Kochenda; B. Komkov; M. Konno; J. Koster; D. Kotchetkov; A. Kozlov; A. Král; A. Kravitz; G. J. Kunde; K. Kurita; M. Kurosawa; M. J. Kweon; Y. Kwon; G. S. Kyle; R. Lacey; Y. S. Lai; J. G. Lajoie; D. Layton; A. Lebedev; D. M. Lee; J. Lee; K. B. Lee; K. Lee; K. S. Lee; T. Lee; M. J. Leitch; M. A. L. Leite; E. Leitner; B. Lenzi; P. Liebing; L. A. Linden Levy; T. Liška; A. Litvinenko; H. Liu; M. X. Liu; X. Li; B. Love; R. Luechtenborg; D. Lynch; C. F. Maguire; Y. I. Makdisi; A. Malakhov; M. D. Malik; V. I. Manko; E. Mannel; Y. Mao; L. Mašek; H. Masui; F. Matathias; M. McCumber; P. L. McGaughey; N. Means; B. Meredith; Y. Miake; A. Mignerey; P. Mikeš; K. Miki; A. Milov; M. Mishra; J. T. Mitchell; A. K. Mohanty; Y. Morino; A. Morreale; D. P. Morrison; T. V. Moukhanova; D. Mukhopadhyay; J. Murata; S. Nagamiya; J. L. Nagle; M. Naglis; M. I. Nagy; I. Nakagawa; Y. Nakamiya; T. Nakamura; K. Nakano; J. Newby; M. Nguyen; T. Niita; R. Nouicer; A. S. Nyanin; E. O'Brien; S. X. Oda; C. A. Ogilvie; H. Okada; K. Okada; M. Oka; Y. Onuki; A. Oskarsson; M. Ouchida; K. Ozawa; R. Pak; A. P. T. Palounek; V. Pantuev; V. Papavassiliou; I. Park; J. Park; S. K. Park; W. J. Park; S. F. Pate; H. Pei; J. -C. Peng; H. Pereira; V. Peresedov; D. Yu. Peressounko; C. Pinkenburg; R. P. Pisani; M. Proissl; M. L. Purschke; A. K. Purwar; H. Qu; J. Rak; A. Rakotozafindrabe; I. Ravinovich; K. F. Read; S. Rembeczki; K. Reygers; V. Riabov; Y. Riabov; E. Richardson; D. Roach; G. Roche; S. D. Rolnick; M. Rosati; C. A. Rosen; S. S. E. Rosendahl; P. Rosnet; P. Rukoyatkin; P. Ruži?ka; V. L. Rykov; B. Sahlmueller; N. Saito; T. Sakaguchi; S. Sakai; K. Sakashita; V. Samsonov; S. Sano; T. Sato; S. Sawada; K. Sedgwick; J. Seele; R. Seidl; A. Yu. Semenov; V. Semenov; R. Seto; D. Sharma; I. Shein; T. -A. Shibata; K. Shigaki; M. Shimomura; K. Shoji; P. Shukla; A. Sickles; C. L. Silva; D. Silvermyr; C. Silvestre; K. S. Sim; B. K. Singh; C. P. Singh; V. Singh; M. Slune?ka; A. Soldatov; R. A. Soltz; W. E. Sondheim; S. P. Sorensen; I. V. Sourikova; N. A. Sparks; F. Staley; P. W. Stankus; E. Stenlund; M. Stepanov; A. Ster; S. P. Stoll; T. Sugitate; C. Suire; A. Sukhanov; J. Sziklai; E. M. Takagui; A. Taketani; R. Tanabe; Y. Tanaka; K. Tanida; M. J. Tannenbaum; S. Tarafdar; A. Taranenko; P. Tarján; H. Themann; T. L. Thomas; M. Togawa; A. Toia; L. Tomášek; Y. Tomita; H. Torii; R. S. Towell; V-N. Tram; I. Tserruya; Y. Tsuchimoto; C. Vale; H. Valle; H. W. van Hecke; E. Vazquez-Zambrano; A. Veicht; J. Velkovska; R. Vertesi

2010-02-04T23:59:59.000Z

418

RCRA permit modifications and the functional equivalency demonstration: A case study  

SciTech Connect

Hazardous waste operating permits issued under the Resource Conservation and Recovery Act (RCRA) often impose requirements, typically by reference to the original permit application, that specific components and equipment be used. Consequently, changing these items, even for the purpose of routine maintenance, may first require that the owner/operator request a potentially time-consuming and costly permit modification. However, the owner/operator may demonstrate that a modification is not required because the planned changes are functionally equivalent, as defined by RCRA, to the original specifications embodied by the permit. The Controlled-Air Incinerator at Los Alamos National Laboratory is scheduled for maintenance and improvements that involve replacement of components. The incinerator`s carbon adsorption unit/high efficiency particulate air filtration system, in particular, was redesigned to improve reliability and minimize maintenance. A study was performed to determine whether the redesigned unit would qualify as functionally equivalent to the original component. in performing this study, the following steps were taken: (a) the key performance factors were identified; (b) performance data describing the existing unit were obtained; (c) performance of both the existing and redesigned units was simulated; and (d) the performance data were compared to ascertain whether the components could qualify as functionally equivalent.

Kinker, J.; Lyon, W.; Carnes, R.; Loehr, C. [Benchmark Environmental Corp., Albuquerque, NM (United States); Elsberry, K.; Garcia, P. [Los Alamos National Lab., NM (United States)

1996-05-01T23:59:59.000Z

419

Enhanced top-down characterization of histone post-translational modifications  

Science Conference Proceedings (OSTI)

Background: Multiple post-translational modifications (PTMs) on core histones often work synergistically to fine tune chromatin structure and functions, generating a “histone code” that can be interpreted by a variety of chromatin interacting proteins. Although previous bottom-up and middle-down proteomic approaches have been developed for limited characterization of PTMs on histone N-terminal tails, high-throughput methods for comprehensive identification of PTMs distributed along the entire primary amino acid sequence are yet to be implemented. Results: Here we report a novel online two-dimensional liquid chromatography - tandem mass spectrometry (2D LC–MS/MS) platform for high-throughput and sensitive characterization of histone PTMs at the intact protein level. The metal-free LC system with reverse phase separation followed by weak cation exchange – hydrophilic interaction chromatography (WCX-HILIC) and online Orbitrap Velos tandem mass spectrometry allowed for unambiguous identification of over 700 histone isoforms from a single 2D LC–MS/MS analysis of 7.5 µg of purified core histones. In comparison with previous offline top-down analysis of H4, this online study identified ?100 additional isoforms from ?100-fold less sample. This platform enabled comprehensive characterization of histone modifications, including those beyond tail regions, with dramatically improved throughput and sensitivity compared to more traditional platforms. Isoforms identified included those with combinatorial PTMs extending well beyond the N-terminal tail regions as well as a large number of phosphorylated isoforms.

Tian, Zhixin; Tolic, Nikola; Zhao, Rui; Moore, Ronald J.; Hengel, Shawna M.; Robinson, Errol W.; Stenoien, David L.; Wu, Si; Smith, Richard D.; Pasa-Tolic, Ljiljana

2012-10-03T23:59:59.000Z

420

Recognition of a Mononucleosomal Histone Modification Pattern by BPTF via Multivalent Interactions  

SciTech Connect

Little is known about how combinations of histone marks are interpreted at the level of nucleosomes. The second PHD finger of human BPTF is known to specifically recognize histone H3 when methylated on lysine 4 (H3K4me2/3). Here, we examine how additional heterotypic modifications influence BPTF binding. Using peptide surrogates, three acetyllysine ligands are indentified for a PHD-adjacent bromodomain in BPTF via systematic screening and biophysical characterization. Although the bromodomain displays limited discrimination among the three possible acetyllysines at the peptide level, marked selectivity is observed for only one of these sites, H4K16ac, in combination with H3K4me3 at the mononucleosome level. In support, these two histone marks constitute a unique trans-histone modification pattern that unambiguously resides within a single nucleosomal unit in human cells, and this module colocalizes with these marks in the genome. Together, our data call attention to nucleosomal patterning of covalent marks in dictating critical chromatin associations.

A Ruthenburg; H Li; T Milne; S Dewell; R McGinty; M Yuen; B Ueberheide; Y Dou; T Muir; et al.

2011-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Recognition of a Mononucleosomal Histone Modification Pattern by BPTF via Multivalent Interactions  

Science Conference Proceedings (OSTI)

Little is known about how combinations of histone marks are interpreted at the level of nucleosomes. The second PHD finger of human BPTF is known to specifically recognize histone H3 when methylated on lysine 4 (H3K4me2/3). Here, we examine how additional heterotypic modifications influence BPTF binding. Using peptide surrogates, three acetyllysine ligands are indentified for a PHD-adjacent bromodomain in BPTF via systematic screening and biophysical characterization. Although the bromodomain displays limited discrimination among the three possible acetyllysines at the peptide level, marked selectivity is observed for only one of these sites, H4K16ac, in combination with H3K4me3 at the mononucleosome level. In support, these two histone marks constitute a unique trans-histone modification pattern that unambiguously resides within a single nucleosomal unit in human cells, and this module colocalizes with these marks in the genome. Together, our data call attention to nucleosomal patterning of covalent marks in dictating critical chromatin associations.

Ruthenburg, Alexander J.; Li, Haitao; Milne, Thomas A.; Dewell, Scott; McGinty, Robert K.; Yuen, Melanie; Ueberheide, Beatrix; Dou, Yali; Muir, Tom W.; Patel, Dinshaw J.; Allis, C. David (MSKCC); (Rockefeller); (Michigan-Med)

2011-09-20T23:59:59.000Z

422

Operability test report for core sample truck {number_sign}1 flammable gas modifications  

SciTech Connect

This report primarily consists of the original test procedure used for the Operability Testing of the flammable gas modifications to Core Sample Truck No. One. Included are exceptions, resolutions, comments, and test results. This report consists of the original, completed, test procedure used for the Operability Testing of the flammable gas modifications to the Push Mode Core Sample Truck No. 1. Prior to the Acceptance/Operability test the truck No. 1 operations procedure (TO-080-503) was revised to be more consistent with the other core sample truck procedures and to include operational steps/instructions for the SR weather cover pressurization system. A draft copy of the operations procedure was used to perform the Operability Test Procedure (OTP). A Document Acceptance Review Form is included with this report (last page) indicating the draft status of the operations procedure during the OTP. During the OTP 11 test exceptions were encountered. Of these exceptions four were determined to affect Acceptance Criteria as listed in the OTP, Section 4.7 ACCEPTANCE CRITERIA.

Akers, J.C.

1997-09-15T23:59:59.000Z

423

Categorical Exclusion Determinations: American Recovery and Reinvestment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, 2010 6, 2010 CX-003804: Categorical Exclusion Determination Recovery Act: San Bernardino Associated Government Natural Gas Truck Project (Orange, California Infrastructure Modification) CX(s) Applied: B5.1 Date: 09/16/2010 Location(s): Orange, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory September 16, 2010 CX-003799: Categorical Exclusion Determination Electrochromic Glazing Technology: Improved Performance, Lower Price CX(s) Applied: A9, B2.2, B5.1 Date: 09/16/2010 Location(s): Faribault, Minnesota Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory September 16, 2010 CX-003798: Categorical Exclusion Determination Master Curriculum Development for Energy Auditors, Commissioning Agents and

424

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 4340 of 9,640 results. 31 - 4340 of 9,640 results. Download CX-009260: Categorical Exclusion Determination Water Management in Mature Oil Fields Using Advanced Particle Gels CX(s) Applied: A9 Date: 09/12/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-009260-categorical-exclusion-determination Download CX-009261: Categorical Exclusion Determination Fast Dynamic Simulation-Based Small Signal Stability Assessment and Control CX(s) Applied: A9 Date: 09/12/2012 Location(s): Multiple Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-009261-categorical-exclusion-determination Download CX-009262: Categorical Exclusion Determination Design for High Performance Sustainable Building Modifications Based on E4

425

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21 - 10030 of 26,764 results. 21 - 10030 of 26,764 results. Download CX-005317: Categorical Exclusion Determination University of Arkansas for Medical Sciences (UAMS), District Energy Service Modifications CX(s) Applied: A1, B5.1 Date: 02/24/2011 Location(s): Little Rock, Arkansas Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-005317-categorical-exclusion-determination Download CX-005318: Categorical Exclusion Determination Alternative Fuel/Advanced Vehicle Technology - North Carolina State University CX(s) Applied: A1, B5.1 Date: 02/24/2011 Location(s): North Carolina Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-005318-categorical-exclusion-determination

426

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 4560 of 28,905 results. 51 - 4560 of 28,905 results. Download CX-010829: Categorical Exclusion Determination Coil Tubing (CT) Drilling and Intervention System Using Cost-Effective Vessels (10121-4505-01) CX(s) Applied: A9 Date: 07/30/2013 Location(s): Mexico Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010829-categorical-exclusion-determination Download CX-010892: Categorical Exclusion Determination "Clean Start" - Development of a National Liquid Propane (Autogas) Refueling Network CX(s) Applied: B5.22 Date: 06/28/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010892-categorical-exclusion-determination Download CX-010893: Categorical Exclusion Determination Modification to Demolish Building 900A and Reconstruct Building 900 Project

427

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

71 - 3480 of 28,905 results. 71 - 3480 of 28,905 results. Download CX-000533: Categorical Exclusion Determination Modification to Building 315-M for Savannah River Site Curation Facility CX(s) Applied: B3.1 Date: 11/02/2009 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-000533-categorical-exclusion-determination Download ADMINISTRATIVE RECORDS SCHEDULE 9: TRAVEL AND TRANSPORTATION RECORDS (Revision 2) http://energy.gov/cio/downloads/administrative-records-schedule-9-travel-and-transportation-records-revision-2 Download CX-003551: Categorical Exclusion Determination Two Elk Energy Park Carbon Site Characterization Project - Expanded CX(s) Applied: B3.1 Date: 08/25/2010 Location(s): Campbell County, Wyoming

428

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 9940 of 29,416 results. 31 - 9940 of 29,416 results. Download CX-010893: Categorical Exclusion Determination Modification to Demolish Building 900A and Reconstruct Building 900 Project CX(s) Applied: B1.3, B1.15 Date: 06/28/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010893-categorical-exclusion-determination Download CX-010894: Categorical Exclusion Determination Graphene-Based Composite Sensor for Energy Applications CX(s) Applied: B3.6 Date: 06/27/2013 Location(s): West Virginia Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010894-categorical-exclusion-determination Download CX-010895: Categorical Exclusion Determination Development and Industrialization of Indium Gallium Nitride/Gallium Nitride

429

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 5370 of 28,905 results. 61 - 5370 of 28,905 results. Download CX-000472: Categorical Exclusion Determination Modifications to the Maintenance and Storage Facility 400T Area CX(s) Applied: B3.6 Date: 11/19/2009 Location(s): Benton County, Washington Office(s): Environmental Management, Office of River Protection-Richland Office http://energy.gov/nepa/downloads/cx-000472-categorical-exclusion-determination Download CX-009399: Categorical Exclusion Determination Install 200 Kilowatt Solar Photovoltaic System and Routine Maintenance Actions CX(s) Applied: B1.3, B1.19, B5.16 Date: 11/02/2012 Location(s): Arizona Offices(s): Legacy Management http://energy.gov/nepa/downloads/cx-009399-categorical-exclusion-determination Download CX-009413: Categorical Exclusion Determination CH2MHill Plateau Remediation Company - Small-scale Research and

430

Categorical Exclusion Determinations: Pennsylvania | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 4, 2011 June 4, 2011 CX-005944: Categorical Exclusion Determination Install Government-Supplied Heating, Ventilation, and Air Conditioning Equipment for National Energy Technology Laboratory's Pittsburgh B-167 Fitness Facility CX(s) Applied: B1.4, B2.1, B2.5 Date: 06/04/2011 Location(s): Pittsburgh, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory May 26, 2011 CX-005957: Categorical Exclusion Determination Characterization of Hydrocarbon Samples and/or Qualitative/Quantitative Analysis of Hydrocarbon Mixtures CX(s) Applied: B3.6 Date: 05/26/2011 Location(s): Pittsburgh, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory May 19, 2011 CX-005913: Categorical Exclusion Determination Hydrate Facility Modification to Operations

431

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

01 - 13710 of 31,917 results. 01 - 13710 of 31,917 results. Download CX-005376: Categorical Exclusion Determination Design and Implementation of Geothermal Energy Systems at West Chester University - 2 CX(s) Applied: A9, B5.1, B5.2 Date: 02/28/2011 Location(s): Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office http://energy.gov/nepa/downloads/cx-005376-categorical-exclusion-determination Download CX-002301: Categorical Exclusion Determination Facility Heating, Ventilation, and Air Conditioning System Conversion to Ground Source Heat Pump (Phase 1 Modification) CX(s) Applied: B3.7 Date: 05/12/2010 Location(s): Montana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office http://energy.gov/nepa/downloads/cx-002301-categorical-exclusion-determination

432

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

01 - 22710 of 31,917 results. 01 - 22710 of 31,917 results. Download CX-000575: Categorical Exclusion Determination Building 860 2nd Floor Improvements North End (TA-I) CX(s) Applied: B1.3 Date: 11/24/2009 Location(s): Albuquerque, New Mexico Office(s): Sandia Site Office http://energy.gov/nepa/downloads/cx-000575-categorical-exclusion-determination Download CX-000472: Categorical Exclusion Determination Modifications to the Maintenance and Storage Facility 400T Area CX(s) Applied: B3.6 Date: 11/19/2009 Location(s): Benton County, Washington Office(s): Environmental Management, Office of River Protection-Richland Office http://energy.gov/nepa/downloads/cx-000472-categorical-exclusion-determination Download CX-000478: Categorical Exclusion Determination Proposed rate adjustment for the Jim Woodruff System

433

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 15150 of 28,905 results. 41 - 15150 of 28,905 results. Download Potential Health Hazards of Radiation Potential Health Hazards of Radiation http://energy.gov/lm/downloads/potential-health-hazards-radiation Download CX-009674: Categorical Exclusion Determination Washington River Protection Solutions LLC - Actions to Conserve Energy or Water CX(s) Applied: B5.1 Date: 12/14/2012 Location(s): Washington Offices(s): River Protection-Richland Operations Office http://energy.gov/nepa/downloads/cx-009674-categorical-exclusion-determination Download CX-009641: Categorical Exclusion Determination Dike Construction and Modifications CX(s) Applied: B1.6 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office http://energy.gov/nepa/downloads/cx-009641-categorical-exclusion-determination

434

Categorical Exclusion Determinations: A2 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A2 A2 Categorical Exclusion Determinations: A2 Existing Regulations A2: Clarifying or administrative contract actions Contract interpretations, amendments, and modifications that are clarifying or administrative in nature. DOCUMENTS AVAILABLE FOR DOWNLOAD October 1, 2012 CX-009195: Categorical Exclusion Determination Amendment Number 2 to the Port Townsend Paper Corporation Power Sales Agreement CX(s) Applied: A2 Date: 10/01/2012 Location(s): Oregon, Washington Offices(s): Bonneville Power Administration September 14, 2012 CX-009201: Categorical Exclusion Determination Short-term Additional Amendments to the Alcoa Power Sales Agreement CX(s) Applied: A2 Date: 09/14/2012 Location(s): Oregon, Washington Offices(s): Bonneville Power Administration July 23, 2012 CX-008892: Categorical Exclusion Determination

435

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5, 2011 5, 2011 CX-005119: Categorical Exclusion Determination Somerset County, Maryland Energy Efficiency and Conservation Block Grant (Maryland Energy Administration Subgrantee) CX(s) Applied: B5.1 Date: 01/25/2011 Location(s): Somerset County, Maryland Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 25, 2011 CX-005118: Categorical Exclusion Determination Maryland Energy Efficiency and Conservation Block Grant Water/Wastewater Motor System Upgrades CX(s) Applied: B5.1 Date: 01/25/2011 Location(s): Maryland Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 25, 2011 CX-005112: Categorical Exclusion Determination Environmentally Benign and Permanent Surface Modifications to Prevent Biofueling on Marine and Hydrokinetic Devices

436

Categorical Exclusion Determinations: B1.8 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 8 Categorical Exclusion Determinations: B1.8 Existing Regulations B1.8: Screened water intake and outflow structures Modifications to screened water intake and outflow structures such that intake velocities and volumes and water effluent quality and volumes are consistent with existing permit limits. DOCUMENTS AVAILABLE FOR DOWNLOAD November 8, 2012 CX-009551: Categorical Exclusion Determination Brigham City Hydro Generation Project CX(s) Applied: B1.8, B5.2 Date: 11/08/2012 Location(s): Utah Offices(s): Golden Field Office July 16, 2012 CX-009099: Categorical Exclusion Determination Routine Maintenance CX(s) Applied: B1.3, B1.4, B1.8, B1.16, B1.17 Date: 07/16/2012 Location(s): Washington Offices(s): Pacific Northwest Site Office December 13, 2010 CX-004840: Categorical Exclusion Determination

437

Categorical Exclusion Determinations: B1.4 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 Categorical Exclusion Determinations: B1.4 Existing Regulations B1.4: Air conditioning systems for existing equipment Installation or modification of air conditioning systems required for temperature control for operation of existing equipment. DOCUMENTS AVAILABLE FOR DOWNLOAD May 5, 2013 CX-010293: Categorical Exclusion Determination 2013 B17 Renovation CX(s) Applied: B1.4, B1.15, B1.31, B2.1 Date: 05/03/2013 Location(s): West Virginia Offices(s): National Energy Technology Laboratory April 16, 2013 CX-010193: Categorical Exclusion Determination B-4 Rooms 110, 111, and 112 Roof Top Heating, Ventilation, and Air Conditioning Unit Replacement CX(s) Applied: B1.4, B2.1, B2.2, B2.5 Date: 04/16/2013 Location(s): West Virginia Offices(s): National Energy Technology Laboratory

438

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

11 - 10620 of 26,764 results. 11 - 10620 of 26,764 results. Download CX-004182: Categorical Exclusion Determination Wackenhut Services, Incorporated-Savannah River Site Range 3 Modifications and Live Fire Shoot House Expansion at the Bobby Davis Range (formerly ATTA) CX(s) Applied: B1.15 Date: 09/23/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-004182-categorical-exclusion-determination Download CX-004186: Categorical Exclusion Determination Hydrogen Isotope Application Study CX(s) Applied: B3.6 Date: 09/23/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-004186-categorical-exclusion-determination

439

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

11 - 8020 of 26,764 results. 11 - 8020 of 26,764 results. Download CX-004351: Categorical Exclusion Determination Center for Development of Math, Science and Technology CX(s) Applied: B1.15 Date: 10/29/2010 Location(s): Philadelphia, Pennsylvania Office(s): Science, Chicago Office http://energy.gov/nepa/downloads/cx-004351-categorical-exclusion-determination Download CX-002679: Categorical Exclusion Determination Eastern Avenue Branch Library Improvements CX(s) Applied: B5.1 Date: 06/03/2010 Location(s): Davenport, Iowa Office(s): Energy Efficiency and Renewable Energy, Golden Field Office http://energy.gov/nepa/downloads/cx-002679-categorical-exclusion-determination Download EIS-0075-SA-01: Supplement Analysis Operational and Engineering Modifications, Regulatory Review, and Socioeconomic Variation, Strategic Petroleum Reserve, New Orleans,

440

West Virginia | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2011 1, 2011 EIS-0445: DOE Notice of Availability of the Draft Environmental Impact Statement Mountaineer Commercial Scale Carbon Capture and Storage Project, Mason County, West Virginia March 4, 2011 EIS-0445: EPA Notice of Availability of the Draft Environmental Impact Statement Mountaineer Commercial Scale Carbon Capture and Storage Project, Mason County, West Virginia March 1, 2011 CX-005336: Categorical Exclusion Determination Materials Synthesis Laboratory Modifications/Additions CX(s) Applied: B3.6 Date: 03/01/2011 Location(s): Morgantown, West Virginia Office(s): Fossil Energy, National Energy Technology Laboratory March 1, 2011 CX-005335: Categorical Exclusion Determination National Energy Technology Laboratory Reciprocating Laboratory Decommissioning CX(s) Applied: B3.6

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 3770 of 9,640 results. 61 - 3770 of 9,640 results. Download CX-006401: Categorical Exclusion Determination Laboratory Dissociation Constant (Kd) Measurements of Non-contaminated Solids and Rad Spiked Solutions CX(s) Applied: B3.6 Date: 05/19/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-006401-categorical-exclusion-determination Download CX-006402: Categorical Exclusion Determination 704-N Wireless Access CX(s) Applied: B1.3 Date: 05/19/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-006402-categorical-exclusion-determination Download CX-006403: Categorical Exclusion Determination Enhanced Low Activity Waste Disposal Premix Silo Area Modifications

442

Categorical Exclusion Determinations: B5.1 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2010 7, 2010 CX-003730: Categorical Exclusion Determination Western Baldwin County, Alabama Grid Interconnection Office of Electricity Delivery and Energy Reliability 11.10 CX(s) Applied: A1, A9, B1.3, B4.6, B5.1 Date: 09/17/2010 Location(s): Baldwin County, Alabama Office(s): Electricity Delivery and Energy Reliability, National Energy Technology Laboratory September 16, 2010 CX-003804: Categorical Exclusion Determination Recovery Act: San Bernardino Associated Government Natural Gas Truck Project (Orange, California Infrastructure Modification) CX(s) Applied: B5.1 Date: 09/16/2010 Location(s): Orange, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory September 16, 2010 CX-003802: Categorical Exclusion Determination

443

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

19, 2009 19, 2009 CX-000316: Categorical Exclusion Determination Massachusetts Revision 1 - High Performance Buildings Program CX(s) Applied: B1.15, B1.22, B1.23, B1.31, B2.1, B2.3, B2.5, A1, A9, A11, B1.3, B1.4, B1.5, B1.7, B5.1 Date: 11/19/2009 Location(s): Massachusetts Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory November 19, 2009 CX-000472: Categorical Exclusion Determination Modifications to the Maintenance and Storage Facility 400T Area CX(s) Applied: B3.6 Date: 11/19/2009 Location(s): Benton County, Washington Office(s): Environmental Management, Office of River Protection-Richland Office November 19, 2009 CX-000436: Categorical Exclusion Determination Monitoring and Numerical Modeling of Shallow Carbon Dioxide Injection

444

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 17150 of 28,905 results. 41 - 17150 of 28,905 results. Download EIS-0246-SA-39: Supplement Analysis Wildlife Mitigation Program, Pend Oreille County, Washington http://energy.gov/nepa/downloads/eis-0246-sa-39-supplement-analysis Download CX-006289: Categorical Exclusion Determination Willow Creek Substation -Transformer Replacement and Substation Modifications CX(s) Applied: B4.6 Date: 07/26/2011 Location(s): Grand County, Colorado Office(s): Western Area Power Administration-Rocky Mountain Region http://energy.gov/nepa/downloads/cx-006289-categorical-exclusion-determination Download CX-005783: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant - Golden Triangle Power Plus Project CX(s) Applied: B5.1 Date: 05/09/2011 Location(s): Starkville, Mississippi

445

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 11590 of 28,560 results. 81 - 11590 of 28,560 results. Download CX-005922: Categorical Exclusion Determination Clean and Secure Energy from Coal CX(s) Applied: B3.6 Date: 05/20/2011 Location(s): Salt Lake City, Utah Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-005922-categorical-exclusion-determination Download CX-005913: Categorical Exclusion Determination Hydrate Facility Modification to Operations CX(s) Applied: B3.6 Date: 05/19/2011 Location(s): Pittsburgh, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-005913-categorical-exclusion-determination Download CX-005905: Categorical Exclusion Determination Recovery Act: San Bernardino Associated Governments (SANBAG) Natural Gas

446

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 25790 of 28,560 results. 81 - 25790 of 28,560 results. Download CX-010843: Categorical Exclusion Determination Subcontractor Repair of Roof Leak in Rm. F45 at 703-1B CX(s) Applied: B1.3 Date: 07/31/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010843-categorical-exclusion-determination Download CX-010844: Categorical Exclusion Determination Subcontractor Repair of Leak Over Entry Door #1 at 703-B CX(s) Applied: B1.3 Date: 07/31/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010844-categorical-exclusion-determination Download CX-010845: Categorical Exclusion Determination Temporary Modification (ETP-TMC-13-01) to Install an Ultrasonic Sound Emitting Device to Control Algae in the H-Retention Basin

447

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

01 - 1810 of 29,416 results. 01 - 1810 of 29,416 results. Download CX-004170: Categorical Exclusion Determination Refurbish Bayou Choctaw Static Mixer Government Furnished Equipment CX(s) Applied: B1.3 Date: 09/17/2010 Location(s): Bayou Choctaw, Louisiana Office(s): Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-004170-categorical-exclusion-determination Download CX-002301: Categorical Exclusion Determination Facility Heating, Ventilation, and Air Conditioning System Conversion to Ground Source Heat Pump (Phase 1 Modification) CX(s) Applied: B3.7 Date: 05/12/2010 Location(s): Montana Office(s): Energy Efficiency and Renewable Energy, Golden Field Office http://energy.gov/nepa/downloads/cx-002301-categorical-exclusion-determination Download Lessons Learned Quarterly Report, June 2009

448

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 10590 of 26,764 results. 81 - 10590 of 26,764 results. Download CX-004166: Categorical Exclusion Determination Contributing to Net Zero Building: High Energy Efficient Exterior Insulation and Finishing System Wall Systems CX(s) Applied: B3.6, B5.1 Date: 09/29/2010 Location(s): West Warwick, Rhode Island Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-004166-categorical-exclusion-determination Download CX-004167: Categorical Exclusion Determination Appliance Technology Evaluation Center-Modification CX(s) Applied: A9, B3.6 Date: 09/29/2010 Location(s): Morgantown, West Virginia Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-004167-categorical-exclusion-determination

449

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

91 - 8800 of 31,917 results. 91 - 8800 of 31,917 results. Page Categorical Exclusion Determinations: B5.23 B5.23: Electric vehicle charging stationsThe installation, modification, operation, and removal of electric vehicle charging stations, using commercially available technology, within a previously... http://energy.gov/nepa/categorical-exclusion-determinations-b523 Download CX-006136: Categorical Exclusion Determination Field Testing of Low Impact Oil Field Roads CX(s) Applied: B3.7 Date: 06/15/2011 Location(s): Webb County, Texas Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-006136-categorical-exclusion-determination Download CX-006141: Categorical Exclusion Determination Revised Market Title for Renewable Energy Program CX(s) Applied: A9, A11, B5.1

450

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

91 - 16900 of 26,764 results. 91 - 16900 of 26,764 results. Download CX-006251: Categorical Exclusion Determination Big Hill Heat Exchanger Isolation Valves - Install CX(s) Applied: B1.3 Date: 06/20/2011 Location(s): Jefferson County, Texas Office(s): Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-006251-categorical-exclusion-determination Download CX-006252: Categorical Exclusion Determination Big Hill Heat Exchanger Isolation Valves GFE CX(s) Applied: B1.3 Date: 06/20/2011 Location(s): Jefferson County, Texas Office(s): Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-006252-categorical-exclusion-determination Page Categorical Exclusion Determinations: B5.23 B5.23: Electric vehicle charging stationsThe installation, modification,

451

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 13590 of 26,764 results. 81 - 13590 of 26,764 results. Download CX-010643: Categorical Exclusion Determination Minnesota E85 Fueling Network Expansion Project CX(s) Applied: B5.22 Date: 06/27/2013 Location(s): Minnesota Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010643-categorical-exclusion-determination Download CX-010637: Categorical Exclusion Determination "Clean Start" - Development of a National Liquid Propane (Autogas) Refueling Network CX(s) Applied: B5.22 Date: 06/28/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010637-categorical-exclusion-determination Download CX-010638: Categorical Exclusion Determination Modification to Demolish Building 900A and Reconstruct Building 900 Project

452

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 25740 of 31,917 results. 31 - 25740 of 31,917 results. Download CX-005488: Categorical Exclusion Determination Destructive Evaluation of Plutonium Storage Can Bundles CX(s) Applied: B3.6 Date: 03/02/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005488-categorical-exclusion-determination Download CX-002551: Categorical Exclusion Determination Replace Defense Waste Processing Facility Argon Tank CX(s) Applied: B1.3 Date: 04/07/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-002551-categorical-exclusion-determination Download CX-001412: Categorical Exclusion Determination Maintenance and Modification of Well Test Reactor Area (TRA)-08

453

Polyamide desalination membrane characterization and surface modification to enhance fouling resistance.  

SciTech Connect

The market for polyamide desalination membranes is expected to continue to grow during the coming decades. Purification of alternative water sources will also be necessary to meet growing water demands. Purification of produced water, a byproduct of oil and gas production, is of interest due to its dual potential to provide water for beneficial use as well as to reduce wastewater disposal costs. However, current polyamide membranes are prone to fouling, which decreases water flux and shortens membrane lifetime. This research explored surface modification using poly(ethylene glycol) diglycidyl ether (PEGDE) to improve the fouling resistance of commercial polyamide membranes. Characterization of commercial polyamide membrane performance was a necessary first step before undertaking surface modification studies. Membrane performance was found to be sensitive to crossflow testing conditions. Concentration polarization and feed pH strongly influenced NaCl rejection, and the use of continuous feed filtration led to higher water flux and lower NaCl rejection than was observed for similar tests performed using unfiltered feed. Two commercial polyamide membranes, including one reverse osmosis and one nanofiltration membrane, were modified by grafting PEGDE to their surfaces. Two different PEG molecular weights (200 and 1000) and treatment concentrations (1% (w/w) and 15% (w/w)) were studied. Water flux decreased and NaCl rejection increased with PEGDE graft density ({micro}g/cm{sup 2}), although the largest changes were observed for low PEGDE graft densities. Surface properties including hydrophilicity, roughness and charge were minimally affected by surface modification. The fouling resistance of modified and unmodified membranes was compared in crossflow filtration studies using model foulant solutions consisting of either a charged surfactant or an oil in water emulsion containing n-decane and a charged surfactant. Several PEGDE-modified membranes demonstrated improved fouling resistance compared to unmodified membranes of similar initial water flux, possibly due to steric hindrance imparted by the PEG chains. Fouling resistance was higher for membranes modified with higher molecular weight PEG. Fouling was more extensive for feeds containing the cationic surfactant, potentially due to electrostatic attraction with the negatively charged membranes. However, fouling was also observed in the presence of the anionic surfactant, indicating hydrodynamic forces are also responsible for fouling.

Sharma, Mukul M. (Univeristy of Texas at Austin, Austin, TX); Freeman, Benny D. (Univeristy of Texas at Austin, Austin, TX); Van Wagner, Elizabeth M. (Univeristy of Texas at Austin, Austin, TX); Hickner, Michael A. (Pennsylvania State University, University Park, PA); Altman, Susan Jeanne

2010-08-01T23:59:59.000Z

454

Modification of turbulent structure in channel flows by microbubble injection close to the wall  

E-Print Network (OSTI)

An investigation of turbulent structure modification of a boundary layer for a fully developed channel flow by microbubble injection close to the upper wall was carried out using Particle Image Velocimetry (PIV). Two-dimensional velocity components in an x-y plane at Reynolds number of 5128 based on the half height of the channel and bulk velocity were measured. Microbubbles, with an average diameter of 30 ??m were produced by electrolysis and injected in the buffer layer. Different values of the void fraction were attained and used to evaluate the effects of the presence of microbubbles and their concentration within the boundary layer. A reduction in drag was observed due to the injection of microbubbles. Drag reduction augments as the value of the void fraction increases. Furthermore, increases in both the non-dimensional values of streamwise and normal turbulent intensities, normalized by the friction velocity were observed with the void fraction growth. A gradual decrease in the Reynolds shear stresses was achieved as the void fraction increases. This effect is due to a ??decorrelation?? or ??decoupling?? between the streamwise and normal fluctuating velocities. Modifications in the length and time scales due to the presence of microbubbles were detected by calculating two-point correlation coefficients in one and two dimensions and the autocorrelation coefficient at various locations within the measurement zone. Streamline length and time scales were increased. On the contrary, the normal length and time scales were decreased. The vorticity and strain rate values decreased with the injection of microbubbles. Turbulent energy production was also decreased within the boundary layer. Quadrant analysis was used to find out the contribution of the u?? and v?? fluctuating velocity components to the Reynolds stress. The presence of microbubbles reduces the contribution to the Reynolds stresses by Q4 events (sweeps), which are responsible for the production of skin friction. Vortical structure detection in the measurement area was pursued. The structure with and without the microbubble injection is compared. In this study the presence of microbubbles within the boundary layer has produced several modifications in the flow structure as well as reduction in the drag.

Gutierrez Torres, Claudia del Carmen

2004-08-01T23:59:59.000Z

455

Modification of Multiresolution Feature Analysis for Application to Three-Dimensional Atmospheric Wind Fields  

Science Conference Proceedings (OSTI)

Multiresolution feature analysis (MFA), as originally proposed for estimating the fractal dimension of two-dimensional scalar fields, is described. MFA applies specified correlation filters to a data field (such as a gray-scale image) at ...

F. L. Ludwig; Robert L. Street

1995-01-01T23:59:59.000Z

456

CX-004182: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

182: Categorical Exclusion Determination 182: Categorical Exclusion Determination CX-004182: Categorical Exclusion Determination Wackenhut Services, Incorporated-Savannah River Site Range 3 Modifications and Live Fire Shoot House Expansion at the Bobby Davis Range (formerly ATTA) CX(s) Applied: B1.15 Date: 09/23/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office Wackenhut Services, Incorporated-Savannah River Site (WSI-SRS) proposes temporary modifications to Range 3 at the Bobby Davis Range for firearms qualifications that meet Department of Energy requirements while ongoing modifications on adjacent ranges are being completed. Temporary modifications are comprised of minor excavation for installation of target location markers, firing line markers, and steadying post inserts, as well

457

CX-008358: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: Categorical Exclusion Determination 8: Categorical Exclusion Determination CX-008358: Categorical Exclusion Determination Renovation of E-Wing Ventilation, Building 773-A CX(s) Applied: B2.1 Date: 04/18/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office Y646 is the current project underway to address Modification 2 of the original Commercial Modification Scope Document (CMSD). CMSD was originated to modify the E-Wing heating, ventilation and air conditioning (HVAC) Ventilation System to improve the air flow balance; and to improve radiological confinement and contamination control. These modifications are based on the results of an SRTC Computer Model for 773-A which was performed by Systems Engineering. Revision 3 - Added description and scope for the use of a Temporary Modification for 773-A F-080 exhaust system.

458

Modification No. M081 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620 Page 2 of 4 1. This modification deletes Appendix D entitled, "Key Personnel," dated August 23, 2004, that is currently in Section J of the Contract and replaces it with Attachment 1, Appendix D entitled, "Key Personnel," dated December 23, 2004, of this Modification. 2. This modification deletes Contract Clause I 63. entitled, "DEAR 952.204-2 Security (SEP 1997)(Modified)," and replaces it with Contract Clause I 63. entitled, "DEAR 952.204-2 Security (MAY 2002)(Modified). Contract Clause I 63. entitled, "DEAR 952.204-2 Security (MAY 2002)(Modified)," is stated below in its entirety. 63. DEAR 952.204-2 SECURITY (MAY 2002)(Modified) (a) Responsibility. It is the contractor's duty to safeguard all classified information, special

459

Applied Mathematics Conferences and Workshops | U.S. DOE Office of Science  

Office of Science (SC) Website

Applied Applied Mathematics » Applied Mathematics Conferences And Workshops Advanced Scientific Computing Research (ASCR) ASCR Home About Research Applied Mathematics Applied Mathematics Conferences And Workshops Computer Science Next Generation Networking Scientific Discovery through Advanced Computing (SciDAC) Computational Science Graduate Fellowship (CSGF) ASCR SBIR-STTR Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) News & Resources Contact Information Advanced Scientific Computing Research U.S. Department of Energy SC-21/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-7486 F: (301) 903-4846 E: sc.ascr@science.doe.gov More Information » Applied Mathematics

460

11. CONTRACT ID CODE PAGE OF PAGES I AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT  

National Nuclear Security Administration (NNSA)

11. CONTRACT ID CODE 11. CONTRACT ID CODE PAGE OF PAGES I AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 I 2. AMENDMENTIMODIFICATION NO. 258 6. ISSUED BY CODE 3. EFFECTIVE DATE See Block 16C 05008 4. REQUISITION/PURCHASE REQ. NO. 7. ADMINISTERED BY (If other than Item 6) 15. PROJECT NO. (If applicable) CODE 1 0 5 0 0 8 NNSA/Oakridge Site Office NNSA/Oakridge Site Office U.S. Department of Energy U. S. Department of Energy NNSA/Y-12 Site Office NNSA/Y-12 Site Office P.O. Box 2050 P.O. Box 2050 Building 9704-2 Building 9704-2 Oak Ridge TN 37831 Oak Ridge TN 37831 8. NAME AND ADDRESS OF CONTRACTOR (No., str**t, county, SIal. and ZIP Code) ABCOCK & WILCOX TECHNICAL SERVICES Y-12, ttn: WILLIE J. WILSON o BOX 2009 02 SCARBORO RD. , Nl.149/MS 8004 AK RIDGE TN 378318004

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

In situ permeability modification using gelled polymer systems. Annual report, April 11, 1997--April 10, 1998  

Science Conference Proceedings (OSTI)

Results from a research program on the application of gelled polymer technology for in situ permeability modification are presented in this report. The objective of this technology when used with displacement processes such as waterflooding is to reduce the permeability in fractures and/or high permeability matrix zones to improve volumetric sweep efficiency of the displacement process. In production wells, the objective is to reduce water influx. The research program focused on five areas: Gel treatment in fractured systems; Gel treatment in carbonate rocks; In-depth placement of gels; Gel systems for application in carbon dioxide flooding; and Gel treatment in production wells. The research program is primarily an experimental program directed toward improving the understanding of gelled polymer systems and how these systems can be used to increase oil recovery from petroleum reservoirs. A summary of progress for research conducted in the second 12 month period of a 28 month program is described.

Green, D.W.; Willhite, G.P.; McCool, C.S.; Heppert, J.A.; Vossoughi, S.; Michnick, M.J.

1998-09-01T23:59:59.000Z

462

Primordial production of massive relic gravitational waves from a weak modification of General Relativity  

E-Print Network (OSTI)

The production of a stochastic background of relic gravitational waves is well known in various works in the literature, where, using the so called adiabatically-amplified zero-point fluctuations process it has been shown how the standard inflationary scenario for the early universe can in principle provide a distinctive spectrum of relic gravitational waves. In this paper, it is shown that a weak modification of General Relativity produces a third massive polarization of gravitational waves and the primordial production of this polarization is analysed adapting the adiabatically-amplified zero-point fluctuations process at this case. The presence of the mass could also have important applications in cosmology as the fact that gravitational waves can have mass could give a contribution to the dark matter of the Universe. At the end of the paper an upper bound for these relic gravitational waves, which arises from the WMAP constrains, is also released.

Christian Corda

2008-12-02T23:59:59.000Z

463

Environmental assessment for operations, upgrades, and modifications in SNL/NM Technical Area IV  

Science Conference Proceedings (OSTI)

The proposed action for this EA for Sandia National Laboratories/New Mexico Technical Area IV, includes continuing existing operations, modification of an existing accelerator (Particle Beam Fusion Accelerator II) to support defnese-related Z-pinch experiments, and construction of two transformer oil storage tanks to support the expansion of the Advanced Pulsed Power Research Module, a single pulse accelerator. Based on the analyses in the EA, DOE believes that the proposed action is not a major federal action significantly affecting the quality of the human environment within the meaning of NEPA and CEQ NEPA implementing regulations in 40 CFR 1508.18 and 1508.27. Therefore, an environmental impact statement is not required, and a Finding of No Significant Impact is issued.

NONE

1996-04-01T23:59:59.000Z

464

Precision shape modification of nanodevices with a low-energy electron beam  

DOE Patents (OSTI)

Methods of shape modifying a nanodevice by contacting it with a low-energy focused electron beam are disclosed here. In one embodiment, a nanodevice may be permanently reformed to a different geometry through an application of a deforming force and a low-energy focused electron beam. With the addition of an assist gas, material may be removed from the nanodevice through application of the low-energy focused electron beam. The independent methods of shape modification and material removal may be used either individually or simultaneously. Precision cuts with accuracies as high as 10 nm may be achieved through the use of precision low-energy Scanning Electron Microscope scan beams. These methods may be used in an automated system to produce nanodevices of very precise dimensions. These methods may be used to produce nanodevices of carbon-based, silicon-based, or other compositions by varying the assist gas.

Zettl, Alex (Kensington, CA); Yuzvinsky, Thomas David (Berkeley, CA); Fennimore, Adam (Berkeley, CA)

2010-03-09T23:59:59.000Z

465

Ionospheric modification experiments with satellite-borne and ground-based transmitters  

SciTech Connect

A research program is outlined to investigate the nonlinear VLF propagation and interaction with ionospheric plasmas with the satellite-borne and ground-based transmitters. Coordinated space and ground-based ionospheric modification experiments have been planned to study nonlinear propagation and mode conversion of VLF waves into lower hybrid waves in the presence of HF heater created ionospheric irregularities. Space experiments with the mother (ACTIVE)-daughter (CZAK) satellites are also discussed to examine the excitation of parametric instability by powerful VLF waves. Proposed ground-based radar, optical, and VLF measurements can provide effective diagnoses of the induced ionospheric effects. It is expected that electron acceleration caused by the lower hybrid waves will produce intense airglow emissions. In addition, a broad height distribution of enhanced plasma lines is also expected for radars to detect.

Lee, M.C.

1990-05-03T23:59:59.000Z

466

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 11. CONTRACT ID CODE  

NLE Websites -- All DOE Office Websites (Extended Search)

1 PAGE 1 OF 1 PAGE 1 OF 23 PAGES 2. AMENDMENT/MODIFICATION NO. 13. EFFECTIVE DATE M188 See Block 16C 4. REQUISITION/PURCHASE I5. PROJECT NO. (If applicable) REQ. NO. 6. ISSUED BY CODE U.S. Department of Energy National Nuclear Security Administration Service Center Property and M&O Contract Support Department P.O. Box 5400 Albuquerque, NM 87185·5400 7. ADMINISTERED BY (If other than Item 6) CODE U.S. Department of Energy National Nuclear Security Administration Manager, Pantex Site Office P.O. Box 30030 Amarillo, TX 79120 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, state, ZIP Code) Babcock & Wilcox Technical Services Pantex, LLC PO Box 30020 Amarillo, TX 79120 CODE I FACILITY CODE 9A. AMENDMENT OF SOLICITATION NO. 9B. DATED (SEE ITEM 11)

467

Resource Conservation and Recovery Act permit modifications and the functional equivalency demonstration: a case study  

Science Conference Proceedings (OSTI)

Hazardous waste operating permits issued under the Resource Conservation and Recovery Act (RCRA) often impose requirements that specific components and equipment be used. Consequently, changing these items, may first require that the owner/operator request a potentially time-consuming and costly permit modification. However, the owner/operator may demonstrate that a modification is not required because the planned changes are ``functionally equivalent.`` The Controlled-Air Incinerator at Los Alamos National Laboratory is scheduled for maintenance and improvements. The incinerator`s carbon adsorption unit/high efficiency particulate air filtration system, was redesigned to improve reliability and minimize maintenance. A study was performed to determine whether the redesigned unit would qualify as functionally equivalent to the original component. In performing this study, the following steps were taken: (a) the key performance factors were identified; (b) performance data describing the existing unit were obtained; (c) performance of both the existing and redesigned units was simulated; and (d) the performance data were compared to ascertain whether the components could qualify as functionally equivalent. In this case, the key performance data included gas residence time and distribution of flow over the activated carbon. Because both units were custom designed and fabricated, a simple comparison of manufacturers` specifications was impossible. Therefore, numerical simulation of each unit design was performed using the TEMPEST thermal-hydraulic computer code to model isothermal hydrodynamic performance under steady-state conditions. The results of residence time calculations from the model were coupled with flow proportion and sampled using a Monte Carlo-style simulation to derive distributions that describe the predicted residence times.

Elsberry, K.; Garcia, P. [Los Alamos National Lab., NM (United States); Carnes, R.; Kinker, J.; Loehr, C; Lyon, W. [Benchmark Environmental Corp., Albuquerque, NM (United States)

1996-02-01T23:59:59.000Z

468

Operation, modification, and maintenance of DOE/PETC 700 H. P. Combustion Test Facility. Quarterly activity report, January 1, 1979--April 1, 1979  

SciTech Connect

Number six fuel oil tests, 30% COM tests, and 40% COM tests were conducted. Operation, modification, and maintenance of the combustion test facility is described. (LTN)

1979-01-01T23:59:59.000Z

469

CSP 581: Applied AI Programming Peter Norvig, Paradigms of AI Programming: Case Studies in Common Lisp  

E-Print Network (OSTI)

CSP 581: Applied AI Programming Texts Peter Norvig, Paradigms of AI Programming: Case Studies LISP Programs 4 hours Total 42 hours CSP 581: Applied AI Programming - CS Dept, Illinois Insti... 1

Heller, Barbara

470

Proceedings of the 28th Annual ACM Symposium on Applied Computing  

Science Conference Proceedings (OSTI)

Welcome to the 28th International Symposium on Applied Computing (SAC 2013). For the past 27 years, SAC has become a major international venue for computing researchers and applied practitioners to convene and share ideas on recent developments in a ...

Sung Y. Shin, José Carlos Maldonado

2013-03-01T23:59:59.000Z

471

Performance Evaluation Statistics Applied to Derived Fields of NWP Model Forecasts  

Science Conference Proceedings (OSTI)

NWP model skill as obtained from the standard statistics applied to derived atmospheric fields such as thermal advection and moisture convergence is different from that obtained by the same statistics applied to basic model output fields such as ...

Prakki Satyamurty; Daniel Pires Bittencourt

1999-10-01T23:59:59.000Z

472

Applying engineering principles to the design and construction of transcriptional devices  

E-Print Network (OSTI)

The aim of this thesis is to consider how fundamental engineering principles might best be applied to the design and construction of engineered biological systems. I begin by applying these principles to a key application ...

Shetty, Reshma P. (Reshma Padmini)

2008-01-01T23:59:59.000Z

473

Applying engineering principles to the design and construction of transcriptional devices  

E-Print Network (OSTI)

The aim of this thesis is to consider how fundamental engineering principles might best be applied to the design and construction of engineered biological systems. I begin by applying these principles to a key application ...

Shetty, Reshma P

2008-05-27T23:59:59.000Z

474

Enforcement Letter, EG&G Mound Applied Technologies- August 22, 1996  

Energy.gov (U.S. Department of Energy (DOE))

Issued to EG&G Mound Applied Technologies related to the Inadvertent Transfer of Radiological Contamination at the Mound Plant

475

Radiation Parameterization for Three-Dimensional Inhomogeneous Cirrus Clouds Applied to ARM Data and Climate Models  

DOE Green Energy (OSTI)

OAK-B135 (a) We developed a 3D radiative transfer model to simulate the transfer of solar and thermal infrared radiation in inhomogeneous cirrus clouds. The model utilized a diffusion approximation approach (four-term expansion in the intensity) employing Cartesian coordinates. The required single-scattering parameters, including the extinction coefficient, single-scattering albedo, and asymmetry factor, for input to the model, were parameterized in terms of the ice water content and mean effective ice crystal size. The incorporation of gaseous absorption in multiple scattering atmospheres was accomplished by means of the correlated k-distribution approach. In addition, the strong forward diffraction nature in the phase function was accounted for in each predivided spatial grid based on a delta-function adjustment. The radiation parameterization developed herein is applied to potential cloud configurations generated from GCMs to investigate broken clouds and cloud-overlapping effects on the domain-averaged heating rate. Cloud inhomogeneity plays an important role in the determination of flux and heating rate distributions. Clouds with maximum overlap tend to produce less heating than those with random overlap. Broken clouds show more solar heating as well as more IR cooling as compared to a continuous cloud field (Gu and Liou, 2001). (b) We incorporated a contemporary radiation parameterization scheme in the UCLA atmospheric GCM in collaboration with the UCLA GCM group. In conjunction with the cloud/radiation process studies, we developed a physically-based cloud cover formation scheme in association with radiation calculations. The model clouds were first vertically grouped in terms of low, middle, and high types. Maximum overlap was then used for each cloud type, followed by random overlap among the three cloud types. Fu and Liou's 1D radiation code with modification was subsequently employed for pixel-by-pixel radiation calculations in the UCLA GCM. We showed that the simulated cloud cover and OLR fields without special tuning are comparable to those of ISCCP dataset and the results derived from radiation budget experiments. Use of the new radiation and cloud schemes enhances the radiative warming in the middle to upper tropical troposphere and alleviates the cold bias in the UCLA atmospheric GCM. We also illustrated that ice crystal size and cloud inhomogeneous are significant factors affecting the radiation budgets at the top of the atmosphere and the surface (Gu et al. 2003). (c) An innovative approach has been developed to construct a 3D field of inhomogeneous clouds in general and cirrus in particular in terms of liquid/ice water content and particle size on the basis of a unification of satellite and ground-based cloud radar data. Satellite remote sensing employing the current narrow-band spectro-radiometers has limitation and only the vertically integrated cloud parameters (optical depth and mean particle size) can be determined. However, by combining the horizontal cloud mapping inferred from satellites with the vertical structure derived from the profiling Doppler cloud radar, a 3D cloud field can be constructed. This represents a new conceptual approach to 3D remote sensing and imaging and offers a new perspective in observing the cloud structure. We applied this novel technique to AVHRR/NOAA satellite and mm-wave cloud radar data obtained from the ARM achieve and assessed the 3D cirrus cloud field with the ice crystal size distributions independently derived from optical probe measurements aboard the University of North Dakota Citation. The retrieved 3D ice water content and mean effective ice crystal size involving an impressive cirrus cloud occurring on April 18, 1997, are shown to be comparable to those derived from the analysis of collocated and coincident in situ aircraft measurements (Liou et al. 2002). (d) Detection of thin cirrus with optical depths less than 0.5, particularly those occurring i n the tropics remains a fundamental problem in remote sensing. We developed a new detection scheme for the

Kuo-Nan Liou

2003-12-29T23:59:59.000Z

476

Christina Snow, Compliance Office SUBJECT: Midway Sunset Cogeneration Company (85-AFC-3C) Staff Analysis of Proposed Modification  

E-Print Network (OSTI)

petition with the California Energy Commission requesting to modify the Midway Sunset Cogeneration Project. The 225-megawatt project was certified by the Energy Commission on May 14, 1987, and began commercial operation on May 1, 1989. The facility is located in Fellows in Kern County, California and uses cogeneration steam to aid in the enhanced oil recovery process. Air Quality technical staff reviewed the petition to amend and requested additional revisions for consistency with the San Joaquin Valley Air Pollution Control District (SJVAPCD) Authority to Construct (ATC) permit. A modification of the petition to amend was submitted and posted online and docketed on November 19, 2010. The proposed amendment requests administrative modifications to Units A, B and C and revision of unit B’s DLN9 Combustion System to a DLN1+ Combustion System. Energy Commission staff reviewed the petition and assessed the impacts of this proposal on environmental quality, public health and safety, and proposes the modifications to the Air Quality Conditions of Certification as noted in the attached analysis. It is staff’s opinion that, with the implementation of the revised air quality condition, the project will remain in compliance with applicable laws, ordinances, regulations, and standards and that the proposed modifications will not result in a significant adverse direct or cumulative impact to the environment (Title 20, California Code of Regulations, Section 1769). The amendment petition and staff’s analysis have been posted on the Energy Commission’s webpage at:

unknown authors

2011-01-01T23:59:59.000Z

477

10 CFR 830 Major Modification Determination for Replacement of ATR Primary Coolant Pumps and Motors  

SciTech Connect

The continued safe and reliable operation of the ATR is critical to the Department of Energy (DOE) Office of Nuclear Energy (NE) mission. While ATR is safely fulfilling current mission requirements, a variety of aging and obsolescence issues challenge ATR engineering and maintenance personnel’s capability to sustain ATR over the long term. First documented in a series of independent assessments, beginning with an OA Environmental Safety and Health Assessment conducted in 2003, the issues were validated in a detailed Material Condition Assessment (MCA) conducted as a part of the ATR Life Extension Program in 2007.Accordingly, near term replacement of aging and obsolescent original ATR equipment has become important to ensure ATR capability in support of NE’s long term national missions. To that end, a mission needs statement has been prepared for a non-major system acquisition which is comprised of three interdependent subprojects. The first project will replace the existent diesel-electrical bus (E-3), switchgear, and the 50-year-old obsolescent marine diesels with commercial power that is backed with safety related emergency diesel generators, switchgear, and uninterruptible power supply (UPS). The second project, the subject of this major modification determination, will replace the four, obsolete, original primary coolant pumps (PCPs) and motors. Completion of this and the two other age-related projects (replacement of the ATR diesel bus [E-3] and switchgear and replacement of the existent emergency firewater injection system) will resolve major age-related operational issues plus make a significant contribution in sustaining the ATR safety and reliability profile. The major modification criteria evaluation of the project pre-conceptual design identified several issues that lead to the conclusion that the project is a major modification: 1. Evaluation Criteria #3 (Change of existing process). The proposed strategy for equipping the replacement PCPs with VFDs and having the PCPs also function as ECPs will require significant safety basis changes requiring DOE approval. 2. Evaluation Criteria #4 (Use of new technology). The use of VFD and VFD “pump catcher” technology for the PCPs is not currently in use and has not been previously formally reviewed/approved by DOE for ATR. It is noted that VFD technology has several decades of commercial use and experience. However, the ATR probabilistic risk assessment will have to be updated, reflecting the changes for supplying ECP flows including VFD reliability, to confirm that the proposed activity maintains or reduces the CDF for the ATR. 3. Evaluation Criteria #5 (Create the need for new or revised safety SSCs). It is expected that the proposed activity will result in a revised list of safety-related SSCs. Specifically, as currently proposed, the existing ECPs will be deleted from the list. The PCPs and their associated components, picking up the ECP function, will be classified as safety-related active Seismic Category I.

Noel Duckwitz

2011-05-01T23:59:59.000Z

478

KeV Ion Beam Induced Surface Modification of SiC Hydrogen Sensor  

DOE Green Energy (OSTI)

Silicon carbide, a wide-bandgap semiconductor, is currently used to fabricate an efficient high temperature hydrogen sensor. When a palladium coating is applied on the exposed surface of silicon carbide, the chemical reaction between palladium and hydrogen produces a detectable change in the surface chemical potential. Rather than applying a palladium film, we have implanted palladium ions into the silicon face of 6H, n-type Sic samples. The implantation energies and fluences, as well as the results obtained by monitoring the current through the sample in the presence of hydrogen are included in this paper.

Muntele, C.I.; Ila, D.; Williams, E.K.; Poker, D.B.; Hensley, D.K.

1999-11-29T23:59:59.000Z

479

10 CFR 830 Major Modification Determination for the ATR Diesel Bus (E-3) and Switchgear Replacement  

SciTech Connect

Near term replacement of aging and obsolescent original ATR equipment has become important to ensure ATR capability in support of NE’s long term national missions. To that end, a mission needs statement has been prepared for a non-major system acquisition which is comprised of three interdependent subprojects. The first project, subject of this determination, will replace the existent diesel-electrical bus (E-3) and associated switchgear. More specifically, INL proposes transitioning ATR to 100% commercial power with appropriate emergency backup to include: • Provide commercial power as the normal source of power to the ATR loads currently supplied by diesel-electric power. • Provide backup power to the critical ATR loads in the event of a loss of commercial power. • Replace obsolescent critical ATR power distribution equipment, e.g., switchgear, transformers, motor control centers, distribution panels. Completion of this and two other age-related projects (primary coolant pump and motor replacement and emergency firewater injection system replacement) will resolve major age related operational issues plus make a significant contribution in sustaining the ATR safety and reliability profile. The major modification criteria evaluation of the project pre-conceptual design identified several issues make the project a major modification: 1. Evaluation Criteria #2 (Footprint change). The addition of a new PC-4 structure to the ATR Facility to house safety-related SSCs requires careful attention to maintaining adherence to applicable engineering and nuclear safety design criteria (e.g., structural qualification, fire suppression) to ensure no adverse impacts to the safety-related functions of the housed equipment. 2. Evaluation Criteria #3 (Change of existing process). The change to the strategy for providing continuous reliable power to the safety-related emergency coolant pumps requires careful attention and analysis to ensure it meets a project primary object to maintain or reduce CDF and does not negatively affect the efficacy of the currently approved strategy. 3. Evaluation Criteria #5 (Create the need for new or revised safety SSCs). The change to the strategy for providing continuous reliable power to the safety-related emergency coolant pumps, based on the pre-conceptual design, will require the addition of two quick start diesel generators, their associated power coordination/distribution controls, and a UPS to the list of safety-related SSCs. Similarly to item 1 above, the addition of these active SSCs to the list of safety-related SSCs and replacement of the E-3 bus requires careful attention to maintaining adherence to applicable engineering and nuclear safety design criteria (e.g., seismic qualification, isolation of redundant trains from common fault failures) to ensure no adverse impacts to the safety-related functions.

Noel Duckwtiz

2011-05-01T23:59:59.000Z

480

Environmentally Benign and Permanent Modifications to Prevent Biofouling on Marine and Hydrokinetic Devices  

DOE Green Energy (OSTI)

Semprus Biosciences is developing environmentally benign and permanent modifications to prevent biofouling on Marine and Hydrokinetic (MHK) devices. Biofouling, including growth on external surfaces by bacteria, algae, barnacles, mussels, and other marine organisms, accumulate quickly on MHK devices, causing mechanical wear and changes in performance. Biofouling on crucial components of hydrokinetic devices, such as rotors, generators, and turbines, imposes substantial mass and hydrodynamic loading with associated efficiency loss and maintenance costs. Most antifouling coatings leach toxic ingredients, such as copper and tributyltin, through an eroding process, but increasingly stringent regulation of biocides has led to interest in the development of non-biocidal technologies to control fouling. Semprus Biosciences research team is developing modifications to prevent fouling from a broad spectrum of organisms on devices of all shapes, sizes, and materials for the life of the product. The research team designed and developed betaine-based polymers as novel underwater coatings to resist the attachment of marine organisms. Different betaine-based monomers and polymers were synthesized and incorporated within various coating formulations. The formulations and application methods were developed on aluminum panels with required adhesion strength and mechanical properties. The coating polymers were chemically stable under UV, hydrolytic and oxidative environments. The sulfobetaine formulations are applicable as nonleaching and stable underwater coatings. For the first time, coating formulations modified with highly packed sulfobetaine polymers were prepared and demonstrated resistance to a broad spectrum of marine organisms. Assays for comparing nonfouling performance were developed to evaluate protein adsorption and bacteria attachment. Barnacle settlement and removal were evaluated and a 60-day field test was performed. Silicone substrates including a commercial fouling release coating were used for comparison. Compared with the unmodified silicone substrates, the sulfobetaine-modified formulations were able to exhibit a 98% reduction in fibrinogen adsorption, 97.0% (E. coli), 99.6% (S. aureus), and 99.5% (C. lytica) reduction in bacteria attachment, and 100% reduction in barnacles cyprid attachment. In addition to the significant improvement in fouling resistance of various organisms, the 60-day field test also showed an evident efficacy from visual assessment, foul rating, and fouling removal test. The research confirmed that the novel antifouling mechanism of betaine polymers provides a new avenue for marine coating development. The developed coatings out-performed currently used nontoxic underwater coatings in a broad spectrum of fouling resistance. By further developing formulations and processing methods for specific devices, the technology is ready for the next stage of development with demonstration in MHK systems.

Zheng Zhang

2012-04-19T23:59:59.000Z

Note: This page contains sample records for the topic "modifications cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Geological Sciences Geological Sciences Atomic-scale structure of the orthoclase (001)-water interface measured with high-resolution x-ray reflectivity P. Fenter, H. Teng, P. Geissbühler, J.M. Hanchar, K.L. Nagy, and N.C. Sturchio Chemical analysis of individual interplanetary dust particles G.J. Flynn, S.R. Sutton, M. Rivers, P. Eng, and M. Newville Diffusion-limited biotransformation of metal contaminants in soils/sediments: chromium T. Tokunaga, J. Wan, D. Joyner, T. Hazen, M. Firestone, E. Schwartz, S. Sutton, and M. Newville Investigation of meteorite porosity by computed microtomography G.J. Flynn, M. Rivers, and S.R. Sutton Microscale imaging of pore structure in hydrothermal sulfide chimneys using synchrotron x-ray computed tomography P. O'Day, J. Muccino, S. Thompson, M.Jew, and J. Holloway

482

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Instrumentation and Techniques Instrumentation and Techniques A bent Laue analyzer detection system for dilute fluorescence XAFS C. Karanfil, Z. Zhong, L.D. Chapman, R. Fischetti, C.U. Segre, B.A. Bunker, and G.B. Bunker A classical Hanbury Brown-Twiss experiment with hard x-rays E. Gluskin, E.E. Alp, I. McNulty, W. Sturhahn, and J. Sutter A fixed-angle double-mirror filter for producing a pink undulator beam at the Advanced Photon Source E. Dufresne, T. Sanchez, T. Nurushev, and S. Dierker A hard x-ray scanning microprobe for fluorescence imaging and microdiffraction at the Advanced Photon Source Z. Cai, B. Lai, P. Ilinski, D. Legnini, J. Maser, W. Yun, and W. Rodrigues A high-energy phase retarder for the simultaneous production of right- and left-handed circularly polarized x-rays C.T. Venkataraman, J.C. Lang, C.S. Nelson, G. Srajer, D.R. Haeffner, and

483

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Science EXAFS and XANES of plutonium and uranium edges from titanate ceramics for fissile materials disposition J.A. Fortner, A.J. Kropf, R.J. Finch, M.C. Hash, S.B. Aase,...

484

Modeling and Simulation of Electromutagenic Processes for Multiscale Modification of Concrete Jinko Kanno1  

E-Print Network (OSTI)

.1 Amperes per square foot. The electric field provides a targeted treatment that eventually could be applied a landmark study on the direct costs of corrosion in nearly every major U.S. industrial sector [1]. Corrosion in bridge structures is a global problem. The study found that the annual direct cost of highway bridge

Kanno,Jinko

485

Sorbent preparation/modification/additives. Final report, September 1, 1992--November 30, 1993  

SciTech Connect

Sorbent preparation techniques used today have generally been adapted from techniques traditionally used by the lime industry. Traditional dry hydration and slaking processes have been optimized to produce materials intended for use in the building industry. These preparation techniques should be examined with an eye to optimization of properties important to the SO{sub 2} capture process. The study of calcium-based sorbents for sulfur dioxide capture is complicated by two factors: (1) little is known about the chemical mechanisms by which the standard sorbent preparation and enhancement techniques work, and (2) a sorbent preparation technique that produces a calcium-based sorbent that enjoys enhanced calcium utilization in one regime of operation [flame zone (>2400 F), in-furnace (1600--2400 F), economizer (800--1100 F), after air preheater (<350 F)] may not produce a sorbent that enjoys enhanced calcium utilization in the other reaction zones. Again, an in-depth understanding of the mechanism of sorbent enhancement is necessary if a systematic approach to sorbent development is to be used. As a long-term goal, an experimental program is being carried out for the purpose of (1) defining the effects of slaking conditions on the properties of calcium-based sorbents, (2) determining how the parent limestone properties of calcium-based sorbents, and (3) elucidating the mechanism(s) relating to the activity of various dry sorbent additives. An appendix contains a one-dimensional duct injection model with modifications to handle the sodium additives.

Prudich, M.E.; Venkataramakrishnan, R. [Ohio Univ., Athens, OH (United States)

1994-02-01T23:59:59.000Z