National Library of Energy BETA

Sample records for models date released

  1. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    in Renewable Energy Consumption and Electricity 2010 Release Date: December 11, 2012 Next Release Date: August 2013 Table 10. Renewable electric power sector net generation by energy source and State, 2009 (thousand kilowatthours) Landfill Gas/MSW Biogenic 1 Other Biomass 2 Alabama 12,535,373 - 2,050 245,980 - - - 248,030 12,783,403 Alaska 1,323,744 - - - - - 7,027 7,027 1,330,771 Arizona 6,427,345 18,299 - 136,641 - 14,145 29545 198,630 6,625,975 Arkansas 4,192,706 34,371 17,645 - - - - 52,016

  2. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    2012 Next Release Date: August 2013 Table 20. Total renewable net summer capacity by energy source and State, 2010 (megawatts) Landfill Gas/MSW 1 Other Biomass 2 Alabama 3,272 - - 583 - - - 583 3,855 Alaska 414 - - - - - 7 7 422 Arizona 2,720 4 - 29 - 20 128 181 2,901 Arkansas 1,341 9 6 312 - - - 326 1,667 California 10,141 292 97 639 2,004 475 2,812 6,319 16,460 Colorado 662 3 10 - - 41 1,294 1,348 2,010 Connecticut 122 159 - - - - - 159 281 Delaware - 8 - - - - 2 10 10 District of Columbia -

  3. Report No. U.S. Department of Eney Release Date:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    No. U.S. Department of Eney Release Date: WR-B-95-06 Office of Inspector General May 5, 1995 Report on Audit of Construction of Protective Force Training Faciliti at the Pantex Plant This report can be obtained from the U.S. Department of Energy Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, Tennessee 37831 S tPrined wth soy ink n recycled pper U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL AUDIT OF CONSTRUCTION OF PROTECTIVE FORCE TRAINING FACILITIES AT THE PANTEX

  4. DATE:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    x JDA 1/31/13 Jan 31, 2013 DATE: 01/31/2013 x Aardal, Janis D Y-Public, See below. Approved for Public Release; Further Dissemination Unlimited By Janis D. Aardal at 1:25 pm, Jan 31, 2013 DOE/RL-2001-41 Revision 6 SITEWIDE INSTITUTIONAL CONTROLS PLAN FOR HANFORD CERCLA RESPONSE ACTIONS AND RCRA CORRECTIVE ACTIONS Prepared for the U.S. Department of Energy Assistant Secretary for Environmental Management P.O. Box 550 Richland, Washington 99352 Approved for Public Release; Further Dissemination

  5. DATE:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    POLICY FLASH 2013-45 DATE: April 16, 2013 TO: Procurement Directors FROM: Director Contract and Financial Assistance Policy Division Office of Policy Office of Acquisition and ...

  6. DATE:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    61 DATE: June 19, 2013 TO: Procurement Directors FROM: Director Policy Division Office of Procurement and Assistance Policy Office of Acquisition and Project Management SUBJECT: ...

  7. DATE:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 DATE: April 10, 2014 TO: Procurement Directors FROM: Director Contract and Financial Assistance Policy Division Office of Policy Office of Acquisition and Project Management ...

  8. DATE:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 DATE: March 10, 2014 TO: Procurement Directors FROM: Director Contract and Financial Assistance Policy Division Office of Policy Office of Acquisition and Project Management ...

  9. DATE:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3-12 DATE: December 7, 2012 TO: Procurement Directors FROM: Director Contract and Financial Assistance Policy Division Office of Policy Office of Acquisition and Project Management ...

  10. DATE:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4-35 DATE: July 09, 2014 TO: Procurement Directors FROM: Director Contract and Financial Assistance Policy Division Office of Policy Office of Acquisition and Project Management ...

  11. DATE:

    Broader source: Energy.gov (indexed) [DOE]

    36 DATE: April 23, 2012 TO: Procurement Directors FROM: Director, Policy Division Office of Procurement and Assistance Policy Office of Procurement and Assistance Management...

  12. DATE:

    Broader source: Energy.gov (indexed) [DOE]

    DATE: February 1, 2012 TO: Procurement Directors FROM: Director, Office of Procurement and Assistance Policy Office of Procurement and Assistance Management SUBJECT: Acquisition...

  13. DATE:

    Broader source: Energy.gov (indexed) [DOE]

    38 DATE: May 03, 2012 TO: Procurement Directors FROM: Director, Contract and Financial Assistance Policy Division Office of Policy Office of Procurement and Assistance Management...

  14. DATE:

    Office of Legacy Management (LM)

    -RL5- DATE: September 13, 1990 TO: Alexander Williams (w 39 fusrap6 I FROM: Ed Mitchellzm SUBJECT: Elimination Recommendation for American Machine and Foundry in New York City The...

  15. DATE:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 By Julia Raymer at 7:58 am, Nov 05, 2013 Nov 05, 2013 DATE: of 1 RPP-RPT-54981, Revision 0 i Table of Contents 1. Summary .................................................................................................................................. 1 2. Introduction ............................................................................................................................. 3 3. Discussion

  16. Date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Template Revised: 6/12/2014 Template Reviewed: 6/12/2014 Operated for the U.S. Department of Energy by Sandia Corporation P.O. Box 5800 MS-1461 Albuquerque, New Mexico 87185-1461 Date Contractor Name Address Attention: Based on our earlier discussions, the Contract Audit Department at Sandia Corporation, which operates Sandia National Laboratories (Sandia) will audit costs incurred through your fiscal year ending XXXXXX on the following contracts placed with your company: Contract(s) Type of

  17. Dated:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    cause appearing, IT IS HEREBY ORDERED: 1. The Schedule Scheduling Order is stayed pending execution of a settlement agreement and stipulated final order. Dated: ~ /,/ .,2015 Christopher T. Saucedo Hearing Officer 3 Complainant, v. UNITED STATES DEPARTMENT OF ENERGY, and NUCLEAR WASTE PARTNERSHIP, LLC, Respondents. No. HWB 14-21 (CO) CERTIFICATE OF SERVICE I hereby certify that a copy of the STIPULATED JOINT MOTION TO STAY THE SCHEDULING ORDER has been sent electronically to the following on May

  18. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2011 Buildings Energy Data Book March 2012 Prepared for the Buildings Technologies Program Energy Efficiency and Renewable Energy U.S. Department of Energy by D&R International, Ltd. under contract to Pacific Northwest National Laboratory This version is dated: March 2012 This document was designed for the internal use of the United States Department of Energy. This document will be occasionally updated and, therefore, this copy may not reflect the most current version. This document was

  19. DATE:

    Office of Environmental Management (EM)

    2-22 DATE: February 1, 2012 TO: Procurement Directors FROM: Director, Office of Procurement and Assistance Policy Office of Procurement and Assistance Management SUBJECT: Acquisition Letter AL 2012-07/Financial Acquisition Letter FAL 2012-01 Congressional Notification of Pending Award of a Contract Action, Announcement of Selected Applications for Negotiation of Financial Assistance Awards, or to Award a Financial Assistance Action in Excess of $1 Million SUMMARY: AL 2012-07/FAL 2012-01 (AL/FAL)

  20. DATE:

    Office of Environmental Management (EM)

    3-45 DATE: April 16, 2013 TO: Procurement Directors FROM: Director Contract and Financial Assistance Policy Division Office of Policy Office of Acquisition and Project Management SUBJECT: DOE Acquisition Guide Chapter 15.1 Source Selection Guide SUMMARY: Attached is a revised Source Selection Guide. The Guide has been updated to reflect changes to DOE policies and practices and includes new topics such as Flow of the Source Selection Process, Source Selection Official Designation,

  1. DATE:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    POLICY FLASH 2014-35 DATE: July 09, 2014 TO: Procurement Directors FROM: Director Contract and Financial Assistance Policy Division Office of Policy Office of Acquisition and Project Management SUBJECT: Rescission of American Recovery and Reinvestment Act Reporting Requirements. SUMMARY: Financial Assistance Letter (FAL) 2014-xx provides COs with: 1) notice of the recession of the reporting requirements for recipients of ARRA funds in accordance with the recently passed P.L. 113- 76,

  2. DATE:

    Office of Legacy Management (LM)

    DATE: AUG 12 1991 REPLY TO ATTN OF: EM-421 (J. Wagoner, 3-8147) SUBIECT: Elimination of the Duriron Company Site TO: The File I have reviewed the attached site summary and elimination recommendation for the Duriron Company Site in Dayton, Ohio. I have determined that there is little likelihood of radioactive contamination at this site. Based on the above, the Ouriron Company Site is hereby eliminated from further consideration under the Formerly Utilized Sites Remedial Action Program. W.

  3. DATE:

    Office of Legacy Management (LM)

    -RL5- DATE: September 13, 1990 TO: Alexander Williams (w 39 fusrap6 I FROM: Ed Mitchellzm SUBJECT: Elimination Recommendation for American Machine and Foundry in New York City The purpose of this note is to provide the following with respect to the former American Machine and Foundry Company (AMF) in New York City, New York--FUSRAP Considered Site Recommendation (g/13/90). 1 he recommendation is to eliminate the AMF New York City sites. If you agree, then please return an "approved"

  4. DATE:

    Office of Legacy Management (LM)

    OOE F 1325.3 m e m o randum DATE: SEP 23 1988 Department of Energy IL_. 9 REPLY TO AlTN OF, NE-23 SUElJECT. Owner Searches for Potential Sites in Chicago IL, (7 TO: W . Cottrell, ORNL 0. Kozlouski, OTS W h ile in Chicago, Illinois, on September 13, 14, and 15, 1988, I drove to the suspected addresses of several potential FUSRAP sites. No owners were contacted during this activity because most of the work was done after normal working hours or while on the way to the airport when tim e would not

  5. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    07 SECTION A. Project Title: Experimentally Validated Computational Modeling of Creep and Creep-Cracking for Nuclear Concrete Structures - Texas Engineering Experiment Station (TEES - TAMU) SECTION B. Project Description Texas A&M University proposes to 1) devise new, 3D concrete material constitutive models base on 3D creep and cracking experiments, 2) establish an improved large-scale structural modeling approach that considers full 3D stress fields rather than plane stress as has been

  6. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: Development and Integration of Light Water Reactor (LWR) Materials Corrosion Degradation Codes into Grizzly - University of California at Berkeley SECTION B. Project Description The University of California, Berkeley proposes to develop deterministic, physico chemical models for predicting the accumulation of localized corrosion damage in the primary coolant circuits of the currently operating fleet of light water reactors. The successful modeling of the accumulation

  7. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: CFA-16-10885: Turbulent MHD flow modeling in annular linear induction pumps with validation experiments SECTION B. Project Description The scope of work consists of modeling and constructing an experimental flow loop facility and diagnostic tools to benchmark to refine and validate the predictions of computational fluid mechanics analyses. This task also involves fabrication of a modular annular linear induction pump (ALIP) pump that, combined with the added

  8. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    19 SECTION A. Project Title: Validation of RELAP-7 for forced convection and natural circulation reactor flows - University of Illinois at Urbana-Champaign SECTION B. Project Description The University of Illinois at Urbana-Champaign proposes to aid in the development of RELAP-7 through required experimental and computational efforts. The validation of the two-phase modeling capability of RELAP-7 will be accomplished through a series of tasks which include synthesis of existing forced convective

  9. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    40 SECTION A. Project Title: Quantifying Properties for a Mechanistic, Predictive Understanding of Aqeous Impact on Ageing of Medium and Low Voltage AC and DC Cabling in Nuclear Power Plants - University of Minnesota, Duluth SECTION B. Project Description The University of Minnesota, Duluth proposes to develop a mechanistic, predictive model for medium and low voltage cable failure based on the primary environmental degradation parameters of aqueous immersion time, temperature, and the oxidation

  10. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SECTION A. Project Title: CFD and System Code Benchmark Data for Plenum-to-Plenum Flow Under Natural Mixed and Forced Circulation Conditions SECTION B. Project Description The project will conduct computer modeling, as well as experimental initiatives. The experimental initiatives include modifications to the current Utah State University experimental wind tunnel to evaluate flows and buoyancy-driven phenomena present in Very High Temperature Reactors during Loss of flow accident conditions.

  11. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SECTION A. Project Title: Thermal Hydraulic & Structural Testing and Modeling of Compact diffusion-bonded heat exchanges for Supercritical CO2 Brayton Cycles SECTION B. Project Description The primary focus of this research proposal would be on validating and verifying the structural integrity of continuous channel -type PCHEs such as the Heatric zig/zag or Marbond (otherwise known as Shimtec) continuous micro-channel heat exchanger opposed to fin-type geometries. The proposed research

  12. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: Microstructure, Thermal, and Mechanical Properties Relationships in U and UZr Alloys SECTION B. Project Description The proposed research will use the state-of-the-art, 3D, synchrotron-based characterization techniques, novel techniques that couple thermal and mechanical properties, existing experimental facilities, and complementary multiscale modeling to evaluate microstructure-properties relationships (both thermal and mechanical) in U and UZr alloys that have been

  13. Model for TCLP Releases from Waste Glasses

    SciTech Connect (OSTI)

    Kim, Dong-Sang; Vienna, John D.

    2003-05-01

    A first-order property model for normalized Toxicity Characteristic Leaching Procedure (TCLP) release as a function of glass composition was developed using data collected from various studies. The normalized boron release is used to estimate the release of toxic elements based on the observation that the boron release represents the conservative release for those constituents of interest. The current TCLP model has two targeted application areas: (1) delisting of waste-glass product as radioactive (not mixed) waste and (2) designating the glass wastes generated from waste-glass research activities as hazardous or non-hazardous. This report describes the data collection and model development for TCLP releases and discusses the issues related to the application of the model.

  14. Sandia National Laboratories Releases Updated Wind Plant Modeling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sandia National Laboratories Releases Updated Wind Plant Modeling Guidelines Sandia National Laboratories Releases Updated Wind Plant Modeling Guidelines September 12, 2014 - ...

  15. DOE's AMO Releases Workshop "Save the Date" and New RFI on Composite Manufacturing

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Advanced Manufacturing Office released a Request for Information on Fiber Reinforced Polymer Composite Manufacturing and plans to host a related workshop on January 13, 2014 in the Washington, D.C. area.

  16. Sandia Labs releases wavelet variability model (WVM)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    releases wavelet variability model (WVM) - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management

  17. DOE Releases Maturity Model to Better Protect the Nation's Grid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Maturity Model to Better Protect the Nation's Grid from Cybersecurity Threats DOE Releases Maturity Model to Better Protect the Nation's Grid from Cybersecurity Threats May 31, 2012 ...

  18. Media contact: Release date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2010 media@wch-rcc.com Local veteran-owned small business gets ARRA funds to upgrade ERDF RICHLAND, Wash.-Washington Closure Hanford has awarded a subcontract worth nearly $7 million to ERLFowler, a local small business, to design and build an operations center and three maintenance facilities at Hanford's Environmental Restoration Disposal Facility. The new facilities are part of a $100 million expansion and upgrade of ERDF funded by the American Recovery and Reinvestment Act. The expansion

  19. Media contact: Release date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    12, 2010 media@wch-rcc.com River Corridor cleanup drivers reach 15 million miles RICHLAND, Wash.-The truck drivers working on the River Corridor Closure Project recently logged 15 million miles transporting waste for disposal at Hanford's Environmental Restoration Disposal Facility. That is the equivalent of more than 600 trips around the Earth. ERDF is the onsite disposal facility for cleanup wastes at the 586-square-mile Hanford Site in south-central Washington state. Most of the 9.3 million

  20. Media contact: Release date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 24, 2010 media@wch-rcc.com Local business receives $3.8 million ARRA cleanup subcontract RICHLAND, Wash.-Washington Closure Hanford has awarded a subcontract worth $3.8 million to Ojeda Business Ventures of Richland. The subcontract is to cleanup 13 waste sites, with an option for cleanup of additional waste sites as needed, in Hanford's F Area. Funding for the work comes from the American Recovery and Reinvestment Act. The sites being cleaned up include a coal pit, underground piping and

  1. Media contact: Release date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 10, 2010 media@wch-rcc.com Local business receives $30 million ARRA subcontract to expand landfill RICHLAND, Wash.-Washington Closure Hanford has awarded a subcontract worth up to $30 million to TradeWind Services, a service-disabled, veteran-owned small business based in Richland. The project, which will expand Hanford's Environmental Restoration Disposal Facility by 50 percent, is funded by the American Recovery and Reinvestment Act. ERDF is an engineered, low-level radioactive and

  2. Media contact: Release date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    electrical equipment, lighting fixtures, barrels, laboratory equipment and hoods, and high-dose-rate wastes in shielded drums. -more- Page 2 The site is roughly six acres in size. ...

  3. Sandia, NREL Release Wave Energy Converter Modeling and Simulation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Release Wave Energy Converter Modeling and Simulation Code: WEC-Sim - Sandia Energy ... Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar ...

  4. Offshore Wind Farm Model Development - Upcoming Release of the...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Offshore Wind Farm Model Development - Upcoming Release of the University of Minnesota's ... September 16, 2015 - 1:14pm Addthis Large-eddy simulation of wind farms with ...

  5. Modeling of Fission Gas Release in UO2

    SciTech Connect (OSTI)

    MH Krohn

    2006-01-23

    A two-stage gas release model was examined to determine if it could provide a physically realistic and accurate model for fission gas release under Prometheus conditions. The single-stage Booth model [1], which is often used to calculate fission gas release, is considered to be oversimplified and not representative of the mechanisms that occur during fission gas release. Two-stage gas release models require saturation at the grain boundaries before gas is release, leading to a time delay in release of gases generated in the fuel. Two versions of a two-stage model developed by Forsberg and Massih [2] were implemented using Mathcad [3]. The original Forsbers and Massih model [2] and a modified version of the Forsberg and Massih model that is used in a commercially available fuel performance code (FRAPCON-3) [4] were examined. After an examination of these models, it is apparent that without further development and validation neither of these models should be used to calculate fission gas release under Prometheus-type conditions. There is too much uncertainty in the input parameters used in the models. In addition. the data used to tune the modified Forsberg and Massih model (FRAPCON-3) was collected under commercial reactor conditions, which will have higher fission rates relative to Prometheus conditions [4].

  6. News Releases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases News Releases We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. News Releases - 2016» News Releases - 2015» News Releases - 2014» News Releases - 2013» News Releases - 2012» News Releases - 2011» News Releases - 2010» News Releases - 2009» News Releases - 2008» The thermal traits of a leaf, critical for photosynthesis, may be under strong evolutionary selection

  7. Sandia National Laboratories Releases Updated Wind Plant Modeling Guidelines

    Office of Energy Efficiency and Renewable Energy (EERE)

    Sandia National Laboratories (Sandia), in collaboration with the Western Electricity Coordinating Council’s (WECC’s) Renewable Energy Modeling Task Force (REMTF), has released an updated version of the WECC Wind Plant Dynamic Modeling Guidelines for the second generation of generic wind turbine generator models.

  8. Stochastic Modeling of Radioactive Material Releases

    SciTech Connect (OSTI)

    Andrus, Jason; Pope, Chad

    2015-09-01

    Nonreactor nuclear facilities operated under the approval authority of the U.S. Department of Energy use unmitigated hazard evaluations to determine if potential radiological doses associated with design basis events challenge or exceed dose evaluation guidelines. Unmitigated design basis events that sufficiently challenge dose evaluation guidelines or exceed the guidelines for members of the public or workers, merit selection of safety structures, systems, or components or other controls to prevent or mitigate the hazard. Idaho State University, in collaboration with Idaho National Laboratory, has developed a portable and simple to use software application called SODA (Stochastic Objective Decision-Aide) that stochastically calculates the radiation dose associated with hypothetical radiological material release scenarios. Rather than producing a point estimate of the dose, SODA produces a dose distribution result to allow a deeper understanding of the dose potential. SODA allows users to select the distribution type and parameter values for all of the input variables used to perform the dose calculation. SODA then randomly samples each distribution input variable and calculates the overall resulting dose distribution. In cases where an input variable distribution is unknown, a traditional single point value can be used. SODA was developed using the MATLAB coding framework. The software application has a graphical user input. SODA can be installed on both Windows and Mac computers and does not require MATLAB to function. SODA provides improved risk understanding leading to better informed decision making associated with establishing nuclear facility material-at-risk limits and safety structure, system, or component selection. It is important to note that SODA does not replace or compete with codes such as MACCS or RSAC, rather it is viewed as an easy to use supplemental tool to help improve risk understanding and support better informed decisions. The work was

  9. Posting Date: 28 May, 2015 Posting Close Date: TBD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PO Value: TBD Estimated Period of Performance: TBD Estimated RFPRFQ Release Date: FY 2016 Estimated Award Date: TBD Competition Type: TBD Buyer Contact Email:...

  10. Sandia, NREL Release Wave Energy Converter Modeling and Simulation Code:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WEC-Sim NREL Release Wave Energy Converter Modeling and Simulation Code: WEC-Sim - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing

  11. Probabilistic consequence model of accidenal or intentional chemical releases.

    SciTech Connect (OSTI)

    Chang, Y.-S.; Samsa, M. E.; Folga, S. M.; Hartmann, H. M.

    2008-06-02

    In this work, general methodologies for evaluating the impacts of large-scale toxic chemical releases are proposed. The potential numbers of injuries and fatalities, the numbers of hospital beds, and the geographical areas rendered unusable during and some time after the occurrence and passage of a toxic plume are estimated on a probabilistic basis. To arrive at these estimates, historical accidental release data, maximum stored volumes, and meteorological data were used as inputs into the SLAB accidental chemical release model. Toxic gas footprints from the model were overlaid onto detailed population and hospital distribution data for a given region to estimate potential impacts. Output results are in the form of a generic statistical distribution of injuries and fatalities associated with specific toxic chemicals and regions of the United States. In addition, indoor hazards were estimated, so the model can provide contingency plans for either shelter-in-place or evacuation when an accident occurs. The stochastic distributions of injuries and fatalities are being used in a U.S. Department of Homeland Security-sponsored decision support system as source terms for a Monte Carlo simulation that evaluates potential measures for mitigating terrorist threats. This information can also be used to support the formulation of evacuation plans and to estimate damage and cleanup costs.

  12. Release Date: February, 2011 Next Release Date: February 2012

    U.S. Energy Information Administration (EIA) Indexed Site

  13. Release Date: February, 2011 Next Release Date: February 2012

    U.S. Energy Information Administration (EIA) Indexed Site

  14. Hanford tank residual waste contaminant source terms and release models

    SciTech Connect (OSTI)

    Deutsch, William J.; Cantrell, Kirk J.; Krupka, Kenneth M.; Lindberg, Michael J.; Serne, R. Jeffrey

    2011-08-23

    Residual waste is expected to be left in 177 underground storage tanks after closure at the U.S. Department of Energys Hanford Site in Washington State (USA). In the long term, the residual wastes represent a potential source of contamination to the subsurface environment. Residual materials that cannot be completely removed during the tank closure process are being studied to identify and characterize the solid phases and estimate the release of contaminants from these solids to water that might enter the closed tanks in the future. As of the end of 2009, residual waste from five tanks has been evaluated. Residual wastes from adjacent tanks C-202 and C-203 have high U concentrations of 24 and 59 wt%, respectively, while residual wastes from nearby tanks C-103 and C-106 have low U concentrations of 0.4 and 0.03 wt%, respectively. Aluminum concentrations are high (8.2 to 29.1 wt%) in some tanks (C-103, C-106, and S-112) and relatively low (<1.5 wt%) in other tanks (C-202 and C-203). Gibbsite is a common mineral in tanks with high Al concentrations, while non-crystalline U-Na-C-O-PH phases are common in the U-rich residual wastes from tanks C-202 and C-203. Iron oxides/hydroxides have been identified in all residual waste samples studied to date. Contaminant release from the residual wastes was studied by conducting batch leach tests using distilled deionized water, a Ca(OH)2-saturated solution, or a CaCO3-saturated water. Uranium release concentrations are highly dependent on waste and leachant compositions with dissolved U concentrations one or two orders of magnitude higher in the tests with high U residual wastes, and also higher when leached with the CaCO3-saturated solution than with the Ca(OH)2-saturated solution. Technetium leachability is not as strongly dependent on the concentration of Tc in the waste, and it appears to be slightly more leachable by the Ca(OH)2-saturated solution than by the CaCO3-saturated solution. In general, Tc is much less leachable

  15. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    1. U.S. energy consumption by energy source, 2006 - 2010 (quadrillion Btu) Energy Source 2006 2007 2008 2009 2010 Total R 99.629 R 101.296 R 99.275 R 94.559 97.722 Fossil Fuels R 84.702 R 86.211 R 83.549 R 78.488 81.109 Coal 22.447 22.749 22.385 19.692 20.850 Coal Coke Net Imports 0.061 0.025 0.041 -0.024 -0.006 Natural Gas 1 R 22.239 R 23.663 R 23.843 R 23.416 24.256 Petroleum 2 39.955 39.774 37.280 35.403 36.010 Electricity Net Imports 0.063 R 0.107 0.112 0.116 0.089 Nuclear Electric Power

  16. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    1. Renewable commercial and industrial sector net generation by energy source and State, 2009 (thousand kilowatthours) Landfill Gas/MSW Biogenic 1 Other Biomass 2 Alabama - - 12,432 2,789,395 - - - 2,801,827 2,801,827 Alaska - - 6,511 - - - - 6,511 6,511 Arizona - - 3,691 - - - - 3,691 3,691 Arkansas - - 5,034 1,528,501 - - - 1,533,534 1,533,534 California 330 205,837 271,843 680,936 - - - 1,158,616 1,158,946 Colorado - - - - - - - - - Connecticut - - - - - - - - - Delaware - - - - - - - - -

  17. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    2. Total renewable net generation by energy source and State, 2010 (thousand kilowatthours) Landfill Gas/MSW Biogenic 1 Other Biomass 2 Alabama 8,704,254 - 11,533 2,365,453 - - - 2,376,986 11,081,240 Alaska 1,433,141 - 6,304 - - - 12,607 18,911 1,452,053 Arizona 6,622,160 24,384 4,027 139,826 - 15,754 134,916 318,907 6,941,067 Arkansas 3,658,962 38,323 18,636 1,566,984 - - - 1,623,943 5,282,905 California 33,430,870 1,812,011 638,772 3,550,877 12,600,098 769,331 6,078,632 25,449,721 58,880,591

  18. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    4. Renewable commercial and industrial sector net generation by energy source and State, 2010 (thousand kilowatthours) Landfill Gas/MSW Biogenic 1 Other Biomass 2 Alabama - - 10,342 2,105,498 - - - 2,115,840 2,115,840 Alaska - - 6,304 - - - - 6,304 6,304 Arizona - - 4,027 - - - - 4,027 4,027 Arkansas - - 4,624 1,566,984 - - - 1,571,608 1,571,608 California 6,657 129,521 276,596 660,619 - 3,934 - 1,070,669 1,077,327 Colorado - - - - - - - - - Connecticut - - - - - - - - - Delaware - - - - - - - -

  19. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    5. Renewable market share of net generation by State, 2009 and 2010 (thousand kilowatthours) Total Generation Percent Renewable Percent NonHydro Renewable Total Generation Percent Renewable Percent NonHydro Renewable Alabama 143,255,556 10.9 2.1 152,150,512 7.3 1.6 Alaska 6,702,159 20.0 0.2 6,759,576 21.5 0.3 Arizona 111,971,250 5.9 0.2 111,750,957 6.2 0.3 Arkansas 57,457,739 10.1 2.8 61,000,185 8.7 2.7 California 204,776,132 26.1 12.5 204,125,596 28.8 12.5 Colorado 50,565,952 10.1 6.4

  20. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    Table 16. U.S. electric net summer capacity, 2006 - 2010 (megawatts) Source 2006 2007 2008 2009 2010 Total 986,215 994,888 1,010,171 1,025,400 1,039,137 Renewable Total 101,934 107,954 116,396 127,070 132,711 Biomass 10,100 10,839 11,050 11,256 11,406 Waste 3,727 4,134 4,186 4,317 4,369 Landfill Gas 978 1,319 1,429 1,418 1,471 MSW 1 2,188 2,218 2,215 2,227 2,220 Other Biomass 2 561 598 542 671 678 Wood and Derived Fuels 3 6,372 6,704 6,864 6,939 7,037 Geothermal 2,274 2,214 2,229 2,382 2,405

  1. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    7. Total renewable net summer capacity by energy source and State, 2009 (megawatts) Landfill Gas/MSW 1 Other Biomass 2 Alabama 3,272 - - 591 - - - 591 3,863 Alaska 414 - - - - - 7 7 422 Arizona 2,720 4 - 29 - 11 63 106 2,826 Arkansas 1,337 5 6 312 - - - 323 1,659 California 10,144 306 96 646 2,004 450 2,650 6,152 16,295 Colorado 666 3 10 - - 14 1,238 1,265 1,931 Connecticut 122 166 - - - - - 166 287 Delaware - 7 - - - - - 7 7 District of Columbia - - - - - - - - - Florida 55 492 171 351 - 25 -

  2. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    8. Renewable electric power sector net summer capacity by energy source and State, 2009 (megawatts) Landfill Gas/MSW 1 Other Biomass 2 Alabama 3,272 - - - - - - - 3,272 Alaska 414 - - - - - 7 7 422 Arizona 2,720 4 - 29 - 11 63 106 2,826 Arkansas 1,337 5 4 - - - - 9 1,346 California 10,138 292 33 489 2,004 450 2,650 5,918 16,056 Colorado 666 3 10 - - 14 1,238 1,265 1,931 Connecticut 122 166 - - - - - 166 287 Delaware - 7 - - - - - 7 7 District of Columbia - - - - - - - - - Florida 55 492 105 67 -

  3. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    9. Renewable commercial and industrial sector net summer capacity by energy source and State, 2009 (megawatts) Landfill Gas/MSW 1 Other Biomass 2 Alabama - - - 591 - - - 591 591 Alaska - - - - - - - - - Arizona - - - - - - - - - Arkansas - - 2 312 - - - 314 314 California 6 13 64 156 - - - 233 239 Colorado - - - - - - - - - Connecticut - - - - - - - - - Delaware - - - - - - - - - District of Columbia - - - - - - - - - Florida - - 66 284 - - - 350 350 Georgia 7 3 - 587 - - - 590 597 Hawaii 5 60 3

  4. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    Table 2. Renewable energy consumption by energy-use sector and energy source, 2006 - 2010 (quadrillion Btu) Sector and Source 2006 2007 2008 2009 2010 Total 6.649 6.523 R 7.186 R 7.600 8.090 Biomass 3.267 3.474 3.849 R 3.912 4.294 Biofuels 0.771 0.991 1.372 R 1.568 1.837 Biodiesel 1 0.033 0.046 0.040 R 0.042 0.034 Ethanol 2 0.453 0.569 0.800 0.910 1.061 Losses and Co-products 0.285 0.377 0.532 0.617 0.742 Biodiesel Feedstock 3 * 0.001 0.001 0.001 0.001 Ethanol Feedstock 4 0.285 0.376 0.531

  5. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    1. Renewable electric power sector net summer capacity by energy source and State, 2010 (megawatts) Landfill Gas/MSW 1 Other Biomass 2 Alabama 3,272 - - - - - - - 3,272 Alaska 414 - - - - - 7 7 422 Arizona 2,720 4 - 29 - 20 128 181 2,901 Arkansas 1,341 9 4 - - - - 13 1,354 California 10,135 279 34 481 2,004 473 2,812 6,082 16,216 Colorado 662 3 10 - - 39 1,289 1,340 2,002 Connecticut 122 159 - - - - - 159 281 Delaware - 8 - - - - 2 10 10 District of Columbia - - - - - - - - - Florida 55 491 105

  6. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    2. Renewable commercial and industrial sector net summer capacity by energy source and State, 2010 (megawatts) Landfill Gas/MSW 1 Other Biomass 2 Alabama - - - 583 - - - 583 583 Alaska - - - - - - - - - Arizona - - - - - - - - - Arkansas - - 2 312 - - - 314 314 California 6 13 64 159 - 2 - 238 244 Colorado - - - - - 2 6 8 8 Connecticut - - - - - - - - - Delaware - - - - - - - - - District of Columbia - - - - - - - - - Florida - - 66 277 - - - 343 343 Georgia 7 3 4 600 - - - 607 614 Hawaii 10 60

  7. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    3. Net summer capacity of plants with the capability to cofire biomass and coal, 2009 and 2010 (megawatts) Biomass/ Coal Cofiring Capacity Total Plant Capacity Biomass/ Coal Cofiring Capacity Total Plant Capacity AL DTE Energy Services 50407 Mobile Energy Services LLC Mobile 73 73 73 73 AL Georgia-Pacific Corp 10699 Georgia Pacific Naheola Mill Choctaw 29 73 29 73 AL International Paper Co 52140 International Paper Prattville Mill Autauga 46 84 45 76 AR Domtar Industries Inc 54104 Ashdown Little

  8. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    4. Renewable energy consumption for non-electric use by energy-use sector and energy source, 2006 - 2010 (quadrillion Btu) Sector and Source 2006 2007 2008 2009 2010 Total 2.776 2.987 3.369 R 3.464 3.836 Biomass 2.676 2.876 3.243 R 3.321 3.662 Biofuels 0.771 0.991 1.372 R 1.569 1.836 Biodiesel 1 0.033 0.046 0.040 R 0.042 0.034 Ethanol 2 0.453 0.569 0.800 0.910 1.060 Losses and Co-products 0.285 0.377 0.532 0.617 0.742 Biodiesel Feedstock 3 * 0.001 0.001 0.001 0.001 Ethanol Feedstock 4 0.285

  9. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    5. Biofuels overview, 2006 - 2010 (trillion Btu) Type 2006 2007 2008 2009 2010 Ethanol Feedstock 1 688 914 1300 1517 1839 Losses and Co-products 2 285 376 531 616 742 Denaturant 11 14 21 26 30 Production 3 414 553 790 928 1127 Net Imports 4 62 37 45 17 -32 Stock Change 5 11 6 13 8 5 Consumption 465 584 821 936 1090 Consumption minus Denaturant 453 569 800 910 1061 Biodiesel Feedstock 6 32 63 88 R67 44 Losses and Co-products 7 * 1 1 1 1 Production 8 32 62 87 R66 44 Net Imports 1 -17 -46 -24 -10

  10. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    6. Waste energy consumption by type of waste and energy-use sector, 2010 (trillion Btu) Electric Utilities Independent Power Producers Total 36 169 17 247 469 Landfill Gas 3 107 10 93 213 MSW Biogenic 1 28 4 3 130 165 Other Biomass 2 5 59 4 23 91 MSW = Municipal Solid Waste. 1 Includes paper and paper board, wood, food, leather, textiles and yard trimmings. 2 Agriculture byproducts/crops, sludge waste, and other biomass solids, liquids and gases. Note: Totals may not equal sum of components due

  11. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    9. Total renewable net generation by energy source and State, 2009 Landfill Gas/MSW Biogenic 1 Other Biomass 2 Alabama 12,535,373 - 14,482 3,035,375 - - - 3,049,857 15,585,230 Alaska 1,323,744 - 6,511 - - - 7,027 13,538 1,337,283 Arizona 6,427,345 18,299 3,691 136,641 - 14,145 29545 202,321 6,629,666 Arkansas 4,192,706 34,371 22,679 1,528,501 - - - 1,585,550 5,778,256 California 27,888,036 1,841,859 625,802 3,732,016 12,852,783 647,390 5,839,813 25,539,662 53,427,698 Colorado 1,885,724 17,463

  12. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    A1. Other non-renewable energy consumption by energy-use sector and energy source, 2006 - 2010 (quadrillion Btu) Sector and Source 2006 2007 2008 2009 2010 Total R 0.258 0.276 0.248 R 0.265 0.275 Commercial 0.021 0.017 0.021 0.022 0.022 MSW Non-Biogenic 1 0.020 0.017 0.021 0.022 0.022 Other Non-Biogenic 2 * 0.001 * * * Industrial R 0.113 0.135 R 0.097 R 0.119 0.129 MSW Non-Biogenic 1 0.005 0.004 0.002 0.003 0.003 Other Non-Biogenic 2 R 0.108 0.130 R 0.095 R 0.116 0.126 Electric Power 3 0.125

  13. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    A2. Other non-renewable net electricity generation by energy-use sector and energy source, 2006 - 2010 (thousand kilowatthours) Sector and Source 2006 2007 2008 2009 2010 Total 12,974,399 12,231,131 11,803,665 11,928,334 12,855,342 Commercial 758,464 764,083 719,532 841,850 834,069 MSW Non-Biogenic 1 751,077 756,260 715,716 820,737 810,045 Other Non-Biogenic 2 7,388 7,823 3,815 21,113 24,024 Industrial 5,103,173 4,690,087 4,124,817 4,457,306 5,213,564 MSW Non-Biogenic 1 27,138 31,258 - - - Other

  14. Next Release Date: August 2013

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Agency, Landfill Methane Outreach Program estimates; ethanol and biofuel losses and ... Office of Electricity, Coal, Nuclear, and Renewables analysis. 2 Primary ...

  15. Next Release Date: August 2013

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    - - Hydroelectric Conventional 0.029 0.016 0.017 0.018 0.016 Solar ThermalPV - - - - * Wind - - - - - Electric Power 4 3.632 3.307 3.596 3.931 4.031 Biomass 0.379 0.386 0.401 ...

  16. Next Release Date: August 2013

    Gasoline and Diesel Fuel Update (EIA)

    Conventional 2,899,048 1,589,981 1,675,889 1,868,336 1,667,690 Solar ThermalPV - - - - 1798 Electric Power 4 352,187,707 320,547,239 350,179,231 387,983,371 397,337,996 ...

  17. Next Release Date: August 2013

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    3. Renewable electric power sector net generation by energy source and State, 2010 (thousand ... NonHydroelectric Total Biomass Geothermal Solar ThermalPV Wind Total Vermont ...

  18. Posting Date: OPEN Posting Close Date: OPEN

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OPEN Posting Close Date: OPEN North American Industry Classification System (NAICS) code for the request: TBD Estimated Subcontract/PO Value: TBD Estimated Period of Performance N/A Estimated RFP/RFQ Release Date: TBD Estimated Award Date: TBD Competition Type: Full Set-Aside Buyer Contact Email: business@lanl.gov Title: General Construction Services Description of Product or Service Required Looking for small business construction companies in all sectors of construction. Must be familiar with

  19. Model and control of heat release in engines

    SciTech Connect (OSTI)

    Oppenheim, A.K.; Packard, A.K.; Hedrick, J.K.; Kuhl, A.L.; Johnson, W.P.

    1996-09-01

    The concept of the paper stems from the premise that the process of heat release in engines involves in essence the evolution and deposition of exothermic energy generated by combustion--events that can be governed promptly by a feedback, adaptive micro-electronic control system. The key to its realization is the principle of DISC (Direct Injection Stratified Charge) engine, implemented by a multi-jet system. The background and the salient features of such a system, referred to as a CCE (Controlled Combustion Engine), have been described in a companion paper (SAE 951961). Presented here are fundamental aspects of the model of the exothermic process and the intrinsic properties of its control system.

  20. Latest News Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Release Release Date: Contact: Shelley Martin, DOE National Energy Technology Laboratory, 304-285-0228, contact.publicaffairs@netl.doe.gov 2016 2015 2014 2013

  1. Grain Boundary Percolation Modeling of Fission Gas Release in Oxide Fuels

    SciTech Connect (OSTI)

    Paul C. Millett; Michael R. Tonks; S. B. Biner

    2012-05-01

    We present a new approach to fission gas release modeling in oxide fuels based on grain boundary network percolation. The method accounts for variability in the bubble growth and coalescence rates on individual grain boundaries, and the resulting effect on macroscopic fission gas release. Two-dimensional representa- tions of fuel pellet microstructures are considered, and the resulting gas release rates are compared with traditional two-stage Booth models, which do not account for long-range percolation on grain boundary net- works. The results show that the requirement of percolation of saturated grain boundaries can considerably reduce the total gas release rates, particularly when gas resolution is considered.

  2. FINAL RELEASE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RELEASE AWARDEE: ____________________________________________________ The work under Award No. DE-__________________________, dated ______________, between the United States of America (represented by the Department of Energy, National Energy Technology Laboratory, and the undersigned awardee, having been completed and finally accepted , and in consideration of Final Payment thereunder, the United States of America, its officers, agents and employees are hereby released from all liabilities,

  3. Municipal Consortium Releases Updated Model Specification for Networked Outdoor Lighting Control Systems

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Municipal Solid-State Street Lighting Consortium (MSSLC) has released an update to its Model Specification for Adaptive Control and Remote Monitoring of LED Roadway...

  4. Data Catalog for Models Simulating Release of Contaminants from Hanford Site Waste Sources

    SciTech Connect (OSTI)

    Riley, Robert G.; Lopresti, Charles A.

    2001-09-26

    This report provides summaries of release models used in Hanford Site assessments published over the past 14 years (1987 to 2001). Mathematical formulations that commonly have been used in recent years (i.e., salt-cake, cement, soil-debris, reactor block, glass, and corrosion) are described, along with associated parameter definitions and their units. Tables in this report provide links to data sources needed to implement the models. These links enable users to quickly locate the specific release model information and data sources they need for applying the models to future to site assessments.

  5. Experiments and Modeling of High Altitude Chemical Agent Release

    SciTech Connect (OSTI)

    Nakafuji, G.; Greenman, R.; Theofanous, T.

    2002-07-08

    Using ASCA data, we find, contrary to other researchers using ROSAT data, that the X-ray spectra of the VY Scl stars TT Ari and KR Aur are poorly fit by an absorbed blackbody model but are well fit by an absorbed thermal plasma model. The different conclusions about the nature of the X-ray spectrum of KR Aur may be due to differences in the accretion rate, since this Star was in a high optical state during the ROSAT observation, but in an intermediate optical state during the ASCA observation. TT Ari, on the other hand, was in a high optical state during both observations, so directly contradicts the hypothesis that the X-ray spectra of VY Sol stars in their high optical states are blackbodies. Instead, based on theoretical expectations and the ASCA, Chandra, and XMM spectra of other nonmagnetic cataclysmic variables, we believe that the X-ray spectra of VY Sol stars in their low and high optical states are due to hot thermal plasma in the boundary layer between the accretion disk and the surface of the white dwarf, and appeal to the acquisition of Chandra and XMM grating spectra to test this prediction.

  6. Nonlinear heat-release/acoustic model for thermoacoustic instability in lean premixed combustors

    SciTech Connect (OSTI)

    Peracchio, A.A.; Proscia, W.M.

    1999-07-01

    Lean premixed combustors, such as those used in industrial gas turbines to achieve low emissions, are often susceptible to thermoacoustic combustion instabilities, which manifest themselves as pressure and heat release oscillations in the combustor. These oscillations can result in increased noise and decreased durability due to vibration and flame motion. A physically based nonlinear parametric model has been developed that captures this instability. It describes the coupling of combustor acoustics with the rate of heat release. The model represents this coupling by accounting for the effect of acoustic pressure fluctuations on the varying fuel/air ratio being delivered to the flame, causing a fluctuating heat release due to both fuel air ratio variations and flame front oscillations. If the phasing of the fluctuating heat release and pressure are proper, an instability results that grows into a limit cycle. The nonlinear nature of the model predicts the onset of the instability and additionally captures the resulting limit cycle. Tests of a lean premixed nozzle at engine scale and engine operating conditions in the UTRC single nozzle rig, conducted under DARPA contract, exhibited instabilities. Parameters from the model were adjusted so that analytical results were consistent with relevant experimental data from this test. The parametric model captures the limit cycle behavior over a range of mean fuel air ratios, showing the instability amplitude (pressure and heat release) to increase and limit cycle frequency to decrease as mean fuel air ratio is reduced.

  7. Model for Simulating Dispersion due to Atmospheric Release of UF6

    Energy Science and Technology Software Center (OSTI)

    1997-01-01

    HGSYSTEMUF6 is a suite of models designed for use in estimating consequences associated with accidental, atmospheric release of Uranium Hexafluoride (UF6) and its reaction products, namely Hydrogen Fluoride (HF), and other non-reactive contaminants which are either negatively, neutrally, or positively buoyant. It is based on HGSYSTEM Version 3.0 of Shell Research LTD., and contains specific algorithms for the treatment of UF6 chemistry and thermodynamics. HGSYSTEMUF6 contains algorithms for the treatment of dense gases, dry andmore » wet deposition, effects due to the presence of buildings (canyon and wake), plume lift-off, and the effects of complex terrain. The models components of the suite include (1) AEROPLUME/RK, used to model near-field dispersion from pressurized two-phase jet releases of UF6 and its reaction products, (2) HEGADAS/UF6 for simulating dense, ground based release of UF6, (3) PGPLUME for simulation of passive, neutrally buoyant plumes (4) UF6Mixer for modeling warm, potentially reactive, ground-level releases of UF6 from buildings, and (5) WAKE, used to model elevated and ground-level releases into building wake cavities of non-reactive plumes that are either neutrally or positively buoyant.« less

  8. HGSYSTEMUF6. Model for Simulating Dispersion due to Atmospheric Release of UF6

    SciTech Connect (OSTI)

    Hanna, G; Chang, J.C.; Zhang, J.X.; Bloom, S.G.; Goode, W.D. Jr; Lombardi, D.A.; Yambert, M.W.

    1998-08-01

    HGSYSTEMUF6 is a suite of models designed for use in estimating consequences associated with accidental, atmospheric release of Uranium Hexafluoride (UF6) and its reaction products, namely Hydrogen Fluoride (HF), and other non-reactive contaminants which are either negatively, neutrally, or positively buoyant. It is based on HGSYSTEM Version 3.0 of Shell Research LTD., and contains specific algorithms for the treatment of UF6 chemistry and thermodynamics. HGSYSTEMUF6 contains algorithms for the treatment of dense gases, dry and wet deposition, effects due to the presence of buildings (canyon and wake), plume lift-off, and the effects of complex terrain. The models components of the suite include (1) AEROPLUME/RK, used to model near-field dispersion from pressurized two-phase jet releases of UF6 and its reaction products, (2) HEGADAS/UF6 for simulating dense, ground based release of UF6, (3) PGPLUME for simulation of passive, neutrally buoyant plumes (4) UF6Mixer for modeling warm, potentially reactive, ground-level releases of UF6 from buildings, and (5) WAKE, used to model elevated and ground-level releases into building wake cavities of non-reactive plumes that are either neutrally or positively buoyant.

  9. Atmospheric Dispersion Modeling of the February 2014 Waste Isolation Pilot Plant Release

    SciTech Connect (OSTI)

    Nasstrom, John; Piggott, Tom; Simpson, Matthew; Lobaugh, Megan; Tai, Lydia; Pobanz, Brenda; Yu, Kristen

    2015-07-22

    This report presents the results of a simulation of the atmospheric dispersion and deposition of radioactivity released from the Waste Isolation Pilot Plant (WIPP) site in New Mexico in February 2014. These simulations were made by the National Atmospheric Release Advisory Center (NARAC) at Lawrence Livermore National Laboratory (LLNL), and supersede NARAC simulation results published in a previous WIPP report (WIPP, 2014). The results presented in this report use additional, more detailed data from WIPP on the specific radionuclides released, radioactivity release amounts and release times. Compared to the previous NARAC simulations, the new simulation results in this report are based on more detailed modeling of the winds, turbulence, and particle dry deposition. In addition, the initial plume rise from the exhaust vent was considered in the new simulations, but not in the previous NARAC simulations. The new model results show some small differences compared to previous results, but do not change the conclusions in the WIPP (2014) report. Presented are the data and assumptions used in these model simulations, as well as the model-predicted dose and deposition on and near the WIPP site. A comparison of predicted and measured radionuclide-specific air concentrations is also presented.

  10. Posting Date: 3/15/2016 Posting Close Date: 4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3/15/2016 Posting Close Date: 4 th QTR 2016 North American Industry Classification System (NAICS) code for the request: 236210 Estimated Subcontract/PO Value: TBD Estimated Period of Performance: TBD Estimated RFP/RFQ Release Date: 4 th QTR 2016 Estimated Award Date: TBD Competition Type: TBD Buyer Contact Email: shanej@lanl.gov Title: Transuranic (TRU) Liquid Waste (TLW) Project Description of Product or Service Required The Transuranic (TRU) Liquid Waste (TLW) Project is a congressionally

  11. Posting Date: July 16, 2015 Posting Close Date: TBD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 16, 2015 Posting Close Date: TBD North American Industry Classification System (NAICS) code for the request: 812332 Estimated Subcontract/PO Value TBD Estimated Period of Performance 8-03-15 Estimated RFP/RFQ Release Date: TBD Estimated Award Date: FY 2018 Competition Type: Open Buyer Contact Email: pbeauparlant@lanl.gov Title: Radioactive Laundry and Respirator Services Description of Product or Service Required Radioactive Laundry and Respirator Services * Current forecasted bid

  12. DOE Releases Maturity Model to Better Protect the Nation's Grid from

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cybersecurity Threats | Department of Energy Maturity Model to Better Protect the Nation's Grid from Cybersecurity Threats DOE Releases Maturity Model to Better Protect the Nation's Grid from Cybersecurity Threats May 31, 2012 - 4:32pm Addthis The Electricity Subsector Cybersecurity Capability Maturity Model, which allows electric utilities and grid operators to assess their cybersecurity capabilities and prioritize their actions and investments to improve cybersecurity, combines elements

  13. Kinetics Study of Solid Ammonia Borane Hydrogen Release Modeling and Experimental Validation for Chemical Hydrogen Storage

    SciTech Connect (OSTI)

    Choi, Yong-Joon; Ronnebro, Ewa; Rassat, Scot D.; Karkamkar, Abhijeet J.; Maupin, Gary D.; Holladay, Jamelyn D.; Simmons, Kevin L.; Brooks, Kriston P.

    2014-02-24

    Ammonia borane (AB), NH3BH3, is a promising material for chemical hydrogen storage with 19.6 wt% gravimetric hydrogen capacity of which 16.2 wt% hydrogen can be utilized below 200C. We have investigated the kinetics of hydrogen release from AB and from an AB-methyl cellulose (AB/MC) composite at temperatures of 160-300C using both experiments and modeling. The purpose of our study was to show safe hydrogen release without thermal runaway effects and to validate system model kinetics. AB/MC released hydrogen at ~20C lower than neat AB and at a rate that is two times faster. Based on the experimental results, the kinetics equations were revised to better represent the growth and nucleation process during decomposition of AB. We explored two different reactor concepts; Auger and fixed bed. The current Auger reactor concept turned out to not be appropriate, however, we demonstrated safe self-propagation of the hydrogen release reaction of solid AB/MC in a fixed bed reactor.

  14. A Fission Gas Release Model for High-Burnup LWR ThO{sub 2}-UO{sub 2} Fuel

    SciTech Connect (OSTI)

    Long, Yun; Yi Yuan; Kazimi, Mujid S.; Ballinger, Ronald G.; Pilat, Edward E.

    2002-06-15

    Fission gas release in thoria-urania fuel has been investigated by creating a specially modified FRAPCON-3 code. Because of the reduced buildup of {sup 239}Pu and a flatter distribution of {sup 233}U, the new model THUPS (Thoria-Urania Power Shape) was developed to calculate the radial power distribution, including the effects of both plutonium and {sup 233}U. Additionally, a new porosity model for the rim region was introduced at high burnup. The mechanisms of fission gas release in ThO{sub 2}-UO{sub 2} fuel are expected to be essentially similar to those of UO{sub 2} fuel; therefore, the general formulations of the existing fission gas release models in FRAPCON-3 were retained. However, the gas diffusion coefficient was adjusted to a lower level to account for the smaller observed release fraction in the thoria-based fuel. To model the accelerated fission gas release at high burnup properly, a new athermal fission gas release model was introduced. The modified version of FRAPCON-3 was calibrated using the measured fission gas release data from the light water breeder reactor. Using the new model to calculate the gas release in typical pressurized water reactor hot pins gives data that indicate that the ThO{sub 2}-UO{sub 2} fuel will have considerably lower fission gas release above a burnup of 50 MWd/kg HM.

  15. Recommended Parameter Values for INEEL Subsurface Disposal Area Source Release Modeling

    SciTech Connect (OSTI)

    Riley, Robert G.; Lopresti, Charles A.

    2004-06-23

    The purpose of this report is to summarize 1) associated information and values for key release model parameters (i.e., best estimate, minimum and maximum) obtained where possible from published experimental data, 2) a structure for selection of sensitivity tests cases that can be used to identify test cases, and 3) recommended test cases for selected contaminants of potential concern to assess remedy effectiveness against a no-treatment base case.

  16. Hanford Tank 241-C-106: Residual Waste Contaminant Release Model and Supporting Data

    SciTech Connect (OSTI)

    Deutsch, William J.; Krupka, Kenneth M.; Lindberg, Michael J.; Cantrell, Kirk J.; Brown, Christopher F.; Schaef, Herbert T.

    2005-06-03

    CH2M HILL is producing risk/performance assessments to support the closure of single-shell tanks at the DOE's Hanford Site. As part of this effort, staff at PNNL were asked to develop release models for contaminants of concern that are present in residual sludge remaining in tank 241-C-106 (C-106) after final retrieval of waste from the tank. This report provides the information developed by PNNL.

  17. Posting Date: 28 May, 2015 Posting Close Date: TBD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    300M Estimated Period of Performance: 5 Years Estimated RFP/RFQ Release Date: 2 nd QTR 2018 Estimated Award Date: TBD Competition Type: TBD Buyer Contact Email: pia@lanl.gov Title: Staff Augmentation Services Description of Product or Service Required Staff Augmentation Services (Current subcontract expires 2019) * Current forecasted bid opportunities are subject to change or cancellation due to scope, mission, or funding requirements. * Some procurements are reserved for small businesses. Note

  18. Posting Date: 28 May, 2015 Posting Close Date: TBD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    700K Estimated Period of Performance: TBD Estimated RFP/RFQ Release Date: FY 2018 Estimated Award Date: TBD Competition Type: TBD Buyer Contact Email: m_armijo@lanl.gov Title: Poly Com Phones Description of Product or Service Required Poly Com Phones (Current subcontracts expires 2019) * Current forecasted bid opportunities are subject to change or cancellation due to scope, mission, or funding requirements. * Some procurements are reserved for small businesses. Note the competition type on the

  19. THETRIS: A MICRO-SCALE TEMPERATURE AND GAS RELEASE MODEL FOR TRISO FUEL

    SciTech Connect (OSTI)

    J. Ortensi; A.M. Ougouag

    2011-12-01

    The dominating mechanism in the passive safety of gas-cooled, graphite-moderated, high-temperature reactors (HTRs) is the Doppler feedback effect. These reactor designs are fueled with sub-millimeter sized kernels formed into TRISO particles that are imbedded in a graphite matrix. The best spatial and temporal representation of the feedback effect is obtained from an accurate approximation of the fuel temperature. Most accident scenarios in HTRs are characterized by large time constants and slow changes in the fuel and moderator temperature fields. In these situations a meso-scale, pebble and compact scale, solution provides a good approximation of the fuel temperature. Micro-scale models are necessary in order to obtain accurate predictions in faster transients or when parameters internal to the TRISO are needed. Since these coated particles constitute one of the fundamental design barriers for the release of fission products, it becomes important to understand the transient behavior inside this containment system. An explicit TRISO fuel temperature model named THETRIS has been developed and incorporated into the CYNOD-THERMIX-KONVEK suite of coupled codes. The code includes gas release models that provide a simple predictive capability of the internal pressure during transients. The new model yields similar results to those obtained with other micro-scale fuel models, but with the added capability to analyze gas release, internal pressure buildup, and effects of a gap in the TRISO. The analyses show the instances when the micro-scale models improve the predictions of the fuel temperature and Doppler feedback. In addition, a sensitivity study of the potential effects on the transient behavior of high-temperature reactors due to the presence of a gap is included. Although the formation of a gap occurs under special conditions, its consequences on the dynamic behavior of the reactor can cause unexpected responses during fast transients. Nevertheless, the strong

  20. Recommended Parameter Values for GENII Modeling of Radionuclides in Routine Air and Water Releases

    SciTech Connect (OSTI)

    Snyder, Sandra F.; Arimescu, Carmen; Napier, Bruce A.; Hay, Tristan R.

    2012-11-01

    The GENII v2 code is used to estimate dose to individuals or populations from the release of radioactive materials into air or water. Numerous parameter values are required for input into this code. User-defined parameters cover the spectrum from chemical data, meteorological data, agricultural data, and behavioral data. This document is a summary of parameter values that reflect conditions in the United States. Reasonable regional and age-dependent data is summarized. Data availability and quality varies. The set of parameters described address scenarios for chronic air emissions or chronic releases to public waterways. Considerations for the special tritium and carbon-14 models are briefly addressed. GENIIv2.10.0 is the current software version that this document supports.

  1. Modeling and validating tritium transfer in a grassland ecosystem in response to {sup 3}H releases

    SciTech Connect (OSTI)

    Le Dizes, S.

    2015-03-15

    In this paper a radioecological model (TOCATTA) for tritium transfer in a grassland ecosystem developed on an hourly time-step basis is proposed and compared with the first data set obtained in the vicinity of the AREVA-NC reprocessing plant of La Hague (France). The TOCATTA model aims at simulating dynamics of tritium transfer in agricultural soil and plant ecosystems exposed to time-varying HTO concentrations in air water vapour and possibly in irrigation and rain water. In the present study, gaseous releases of tritium from the AREVA NC nuclear reprocessing plant in normal operation can be intense and intermittent over a period of less than 24 hours. A first comparison of the model predictions with the field data has shown that TOCATTA should be improved in terms of kinetics of tritium transfer.

  2. MODELING DISPERSION FROM CHEMICALS RELEASED AFTER A TRAIN COLLISION IN GRANITEVILLE, SOUTH CAROLINA

    SciTech Connect (OSTI)

    Buckley, R; Chuck Hunter, C; Robert Addis, R; Matt Parker, M

    2006-08-07

    The Savannah River National Laboratory's (SRNL) Weather INformation and Display (WIND) System was used to provide meteorological and atmospheric modeling/consequence assessment support to state and local agencies following the collision of two Norfolk Southern freight trains on the morning of January 6, 2005. This collision resulted in the release of several toxic chemicals to the environment, including chlorine. The dense and highly toxic cloud of chlorine gas that formed in the vicinity of the accident was responsible for nine fatalities, and caused injuries to more than five hundred others. Transport model results depicting the forecast path of the ongoing release were made available to emergency managers in the county's Unified Command Center shortly after SRNL received a request for assistance. Support continued over the ensuing two days of the active response. The SRNL also provided weather briefings and transport/consequence assessment model results to responders from South Carolina Department of Health and Environmental Control (SCDHEC), the Savannah River Site's (SRS) Emergency Operations Center (EOC), Department of Energy Headquarters, and hazmat teams dispatched from the SRS. Although model-generated forecast winds used in consequence assessments conducted during the incident were provided at 2-km horizontal grid spacing during the accident response, a high-resolution Regional Atmospheric Modeling System (RAMS, version 4.3.0) simulation was later performed to examine potential influences of local topography on plume migration. The detailed RAMS simulation was used to determine meteorology using multiple grids with an innermost grid spacing of 125 meters. Results from the two simulations are shown to generally agree with meteorological observations at the time; consequently, local topography did not significantly affect wind in the area. Use of a dense gas dispersion model to simulate localized plume behavior using the higher resolution winds indicated

  3. The {ital Energy Interaction Model}: A promising new methodology for projecting GPHS-RTG cladding failures, release amounts & respirable release fractions for postulated pre-launch, launch, and post-reentry earth impact accidents

    SciTech Connect (OSTI)

    Coleman, J.R.; Sholtis, J.A. Jr.; McCulloch, W.H.

    1998-01-01

    Safety analyses and evaluations must be scrutable, defensible, and credible. This is particularly true when nuclear systems are involved, with their attendant potential for releases of radioactive materials (source terms) to the unrestricted environment. Analytical projections of General Purpose Heat Source Radioisotope Thermoelectric Generator (GPHS-RTG) source terms, for safety analyses conducted to date, have relied upon generic data correlations using a single parameter of cladding damage, termed {open_quotes}distortion.{close_quotes} However, distortion is not an unequivocal measure of cladding insult, failure, or release. Furthermore, the analytical foundation, applicability, and broad use of distortion are argumentative and, thus, somewhat troublesome. In an attempt to avoid the complications associated with the use of distortion, a new methodology, referred to as the {ital Energy Interaction Model (EIM)}, has been preliminarily developed. This new methodology is based upon the physical principles of energy and energy exchange during mechanical interactions. Specifically, the {ital EIM} considers the energy imparted to GPHS-RTG components (bare fueled clads, GPHS modules, and full GPHS-RTGs) when exposed to mechanical threats (blast/overpressure, shrapnel and fragment impacts, and Earth surface impacts) posed by the full range of potential accidents. Expected forms are developed for equations intended to project cladding failure probabilities, the number of cladding failures expected, release amounts, and the fraction released as respirable particles. The coefficients of the equations developed are then set to fit the GPHS-RTG test data, ensuring good agreement with the experimental database. This assured, fitted agreement with the test database, along with the foundation of the {ital EIM} in first principles, provides confidence in the model{close_quote}s projections beyond the available database. In summary, the newly developed {ital EIM} methodology is

  4. Modeling the influence of bubble pressure on grain boundary separation and fission gas release

    SciTech Connect (OSTI)

    Pritam Chakraborty; Michael R. Tonks; Giovanni Pastore

    2014-09-01

    Grain boundary (GB) separation as a mechanism for fission gas release (FGR), complementary to gas bubble interlinkage, has been experimentally observed in irradiated light water reactor fuel. However there has been limited effort to develop physics-based models incorporating this mechanism for the analysis of FGR. In this work, a computational study is carried out to investigate GB separation in UO2 fuel under the effect of gas bubble pressure and hydrostatic stress. A non-dimensional stress intensity factor formula is obtained through 2D axisymmetric analyses considering lenticular bubbles and Mode-I crack growth. The obtained functional form can be used in higher length-scale models to estimate the contribution of GB separation to FGR.

  5. Date | Open Energy Information

    Open Energy Info (EERE)

    Date Jump to: navigation, search Properties of type "Date" Showing 48 properties using this type. A Property:ASHRAE 169 End Date Property:ASHRAE 169 Start Date B Property:Building...

  6. Evaluating Potential for Large Releases from CO2 StorageReservoirs: Analogs, Scenarios, and Modeling Needs

    SciTech Connect (OSTI)

    Birkholzer, Jens; Pruess, Karsten; Lewicki, Jennifer; Tsang,Chin-Fu; Karimjee, Anhar

    2005-09-19

    While the purpose of geologic storage of CO{sub 2} in deep saline formations is to trap greenhouse gases underground, the potential exists for CO{sub 2} to escape from the target reservoir, migrate upward along permeable pathways, and discharge at the land surface. Such discharge is not necessarily a serious concern, as CO{sub 2} is a naturally abundant and relatively benign gas in low concentrations. However, there is a potential risk to health, safety and environment (HSE) in the event that large localized fluxes of CO{sub 2} were to occur at the land surface, especially where CO{sub 2} could accumulate. In this paper, we develop possible scenarios for large CO{sub 2} fluxes based on the analysis of natural analogues, where large releases of gas have been observed. We are particularly interested in scenarios which could generate sudden, possibly self-enhancing, or even eruptive release events. The probability for such events may be low, but the circumstances under which they might occur and potential consequences need to be evaluated in order to design appropriate site selection and risk management strategies. Numerical modeling of hypothetical test cases is needed to determine critical conditions for such events, to evaluate whether such conditions may be possible at designated storage sites, and, if applicable, to evaluate the potential HSE impacts of such events and design appropriate mitigation strategies.

  7. DOE and EPA Release Annual Fuel Economy Guide with 2013 Models

    Broader source: Energy.gov [DOE]

    The U.S. Environmental Protection Agency and the Department of Energy release the 2013 Fuel Economy Guide.

  8. Dates Fact Sheet.cdr

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Concept DATES is a detection and security information/event management (SIEM) solution enabling asset owners to protect their energy control systems at the network, host, and device level from cyber attacks. DATES complements traditional, signature-based detection with multiple detection algorithms, including model- based and flow anomaly detection and cross-site attack correlation. The DATES detection and SIEM solution gives operators succinct and intuitive attack visualization, with attacks

  9. Estimates of Radioxenon Released from Southern Hemisphere Medical isotope Production Facilities Using Measured Air Concentrations and Atmospheric Transport Modeling

    SciTech Connect (OSTI)

    Eslinger, Paul W.; Friese, Judah I.; Lowrey, Justin D.; McIntyre, Justin I.; Miley, Harry S.; Schrom, Brian T.

    2014-09-01

    Abstract The International Monitoring System (IMS) of the Comprehensive-Nuclear-Test-Ban-Treaty monitors the atmosphere for radioactive xenon leaking from underground nuclear explosions. Emissions from medical isotope production represent a challenging background signal when determining whether measured radioxenon in the atmosphere is associated with a nuclear explosion prohibited by the treaty. The Australian Nuclear Science and Technology Organisation (ANSTO) operates a reactor and medical isotope production facility in Lucas Heights, Australia. This study uses two years of release data from the ANSTO medical isotope production facility and Xe-133 data from three IMS sampling locations to estimate the annual releases of Xe-133 from medical isotope production facilities in Argentina, South Africa, and Indonesia. Atmospheric dilution factors derived from a global atmospheric transport model were used in an optimization scheme to estimate annual release values by facility. The annual releases of about 6.8×1014 Bq from the ANSTO medical isotope production facility are in good agreement with the sampled concentrations at these three IMS sampling locations. Annual release estimates for the facility in South Africa vary from 1.2×1016 to 2.5×1016 Bq and estimates for the facility in Indonesia vary from 6.1×1013 to 3.6×1014 Bq. Although some releases from the facility in Argentina may reach these IMS sampling locations, the solution to the objective function is insensitive to the magnitude of those releases.

  10. DATE: | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DATE: DATE: PDF icon DATE: More Documents & Publications Policy Flash 2013-2 Policy Flash 2013-51 311 Notice Aquisition Letter 2013-05 Financial Assistance Letter 2013-03 ...

  11. MELCOR 1.8.5 modeling aspects of fission product release, transport and deposition an assessment with recommendations.

    SciTech Connect (OSTI)

    Gauntt, Randall O.

    2010-04-01

    The Phebus and VERCORS data have played an important role in contemporary understanding and modeling of fission product release and transport from damaged light water reactor fuel. The data from these test programs have allowed improvement of MELCOR modeling of release and transport processes for both low enrichment uranium fuel as well as high burnup and mixed oxide (MOX) fuels. This paper discusses the synthesis of these findings in the MELCOR severe accident code. Based on recent assessments of MELCOR 1.8.5 fission product release modeling against the Phebus FPT-1 test and on observations from the ISP-46 exercise, modifications to the default MELCOR 1.8.5 release models are recommended. The assessments identified an alternative set of Booth diffusion parameters recommended by ORNL (ORNL-Booth), which produced significantly improved release predictions for cesium and other fission product groups. Some adjustments to the scaling factors in the ORNL-Booth model were made for selected fission product groups, including UO{sub 2}, Mo and Ru in order to obtain better comparisons with the FPT-1 data. The adjusted model, referred to as 'Modified ORNL-Booth,' was subsequently compared to original ORNL VI fission product release experiments and to more recently performed French VERCORS tests, and the comparisons was as favorable or better than the original CORSOR-M MELCOR default release model. These modified ORNL-Booth parameters, input to MELCOR 1.8.5 as 'sensitivity coefficients' (i.e. user input that over-rides the code defaults) are recommended for the interim period until improved release models can be implemented into MELCOR. For the case of ruthenium release in air-oxidizing conditions, some additional modifications to the Ru class vapor pressure are recommended based on estimates of the RuO{sub 2} vapor pressure over mildly hyperstoichiometric UO{sub 2}. The increased vapor pressure for this class significantly increases the net transport of Ru from the fuel to

  12. Background and Derivation of ANS-5.4 Standard Fission Product Release Model

    SciTech Connect (OSTI)

    Beyer, Carl E.; Turnbull, Andrew J.

    2010-01-29

    This background report describes the technical basis for the newly proposed American Nuclear Society (ANS) 5.4 standard, Methods for Calculating the Fractional Release of Volatile Fission Products from Oxide Fuels. The proposed ANS 5.4 standard provides a methodology for determining the radioactive fission product releases from the fuel for use in assessing radiological consequences of postulated accidents that do not involve abrupt power transients. When coupled with isotopic yields, this method establishes the 'gap activity,' which is the inventory of volatile fission products that are released from the fuel rod if the cladding are breached.

  13. National Atmospheric Release Advisory Center dispersion modeling of the Full-scale Radiological Dispersal device (FSRDD) field trials

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Neuscamman, Stephanie J.; Yu, Kristen L.

    2016-05-01

    The results of the National Atmospheric Release Advisory Center (NARAC) model simulations are compared to measured data from the Full-Scale Radiological Dispersal Device (FSRDD) field trials. The series of explosive radiological dispersal device (RDD) experiments was conducted in 2012 by Defence Research and Development Canada (DRDC) and collaborating organizations. During the trials, a wealth of data was collected, including a variety of deposition and air concentration measurements. The experiments were conducted with one of the stated goals being to provide measurements to atmospheric dispersion modelers. These measurements can be used to facilitate important model validation studies. For this study, meteorologicalmore » observations recorded during the tests are input to the diagnostic meteorological model, ADAPT, which provides 3–D, time-varying mean wind and turbulence fields to the LODI dispersion model. LODI concentration and deposition results are compared to the measured data, and the sensitivity of the model results to changes in input conditions (such as the particle activity size distribution of the source) and model physics (such as the rise of the buoyant cloud of explosive products) is explored. The NARAC simulations predicted the experimentally measured deposition results reasonably well considering the complexity of the release. Lastly, changes to the activity size distribution of the modeled particles can improve the agreement of the model results to measurement.« less

  14. Potential Release Site Sediment Concentrations Correlated to Storm Water Station Runoff through GIS Modeling

    SciTech Connect (OSTI)

    C.T. McLean

    2005-06-01

    This research examined the relationship between sediment sample data taken at Potential Release Sites (PRSs) and storm water samples taken at selected sites in and around Los Alamos National Laboratory (LANL). The PRSs had been evaluated for erosion potential and a matrix scoring system implemented. It was assumed that there would be a stronger relationship between the high erosion PRSs and the storm water samples. To establish the relationship, the research was broken into two areas. The first area was raster-based modeling, and the second area was data analysis utilizing the raster based modeling results and the sediment and storm water sample results. Two geodatabases were created utilizing raster modeling functions and the Arc Hydro program. The geodatabase created using only Arc Hydro functions contains very fine catchment drainage areas in association with the geometric network and can be used for future contaminant tracking. The second geodatabase contains sub-watersheds for all storm water stations used in the study along with a geometric network. The second area of the study focused on data analysis. The analytical sediment data table was joined to the PRSs spatial data in ArcMap. All PRSs and PRSs with high erosion potential were joined separately to create two datasets for each of 14 analytes. Only the PRSs above the background value were retained. The storm water station spatial data were joined to the table of analyte values that were either greater than the National Pollutant Discharge Elimination System (NPDES) Multi-Sector General Permit (MSGP) benchmark value, or the Department of Energy (DOE) Drinking Water Defined Contribution Guideline (DWDCG). Only the storm water stations were retained that had sample values greater than the NPDES MSGP benchmark value or the DOE DWDCG. Separate maps were created for each analyte showing the sub-watersheds, the PRSs over background, and the storm water stations greater than the NPDES MSGP benchmark value or the

  15. Large releases from CO2 storage reservoirs: analogs, scenarios,and modeling needs

    SciTech Connect (OSTI)

    Birkholzer, Jens; Pruess, Karsten; Lewicki, Jennifer; Rutqvist,Jonny; Tsang, Chin-Fu; Karimjee, Anhar

    2005-09-01

    While the purpose of geologic storage in deep salineformations is to trap greenhouse gases underground, the potential existsfor CO2 to escape from the target reservoir, migrate upward alongpermeable pathways, and discharge at the land surface. In this paper, weevaluate the potential for such CO2 discharges based on the analysis ofnatural analogs, where large releases of gas have been observed. We areparticularly interested in circumstances that could generate sudden,possibly self-enhancing release events. The probability for such eventsmay be low, but the circumstances under which they occur and thepotential consequences need to be evaluated in order to designappropriate site-selection and risk-management strategies. Numericalmodeling of hypothetical test cases is suggested to determine criticalconditions for large CO2 releases, to evaluate whether such conditionsmaybe possible at designated storage sites, and, if applicable, toevaluate the potential impacts of such events as well as designappropriate mitigation strategies.

  16. Large releases from CO2 storage reservoirs: Analogs, scenarios,and modeling needs

    SciTech Connect (OSTI)

    Birkholzer, Jens; Pruess, Karsten; Lewicki, Jennifer; Rutqvist,Jonny; Tsang, Chin-Fu; Karimjee, Anhar

    2006-03-25

    While the purpose of geologic storage in deep salineformations is to trap greenhouse gases underground, the potential existsfor CO2 to escape from the target reservoir, migrate upward alongpermeable pathways, and discharge at the land surface. In this paper, weevaluate the potential for such CO2 discharges based on the analysis ofnatural analogs, where large releases of gas have been observed. We areparticularly interested in circumstances that could generate sudden,possibly self enhancing release events. The probability for such eventsmay be low, but the circumstances under which they occur and thepotential consequences need to be evaluated in order to designappropriate site-selection and risk-managementstrategies. Numericalmodeling of hypothetical test cases is suggested to determine criticalconditions for large CO2 releases, to evaluate whether such conditionsmay be possible at designated storage sites, and, if applicable, toevaluate the potential impacts of such events as well as designappropriate mitigation strategies.

  17. New Perspectives for the Spent Nuclear Fuel Radionuclides Release Model in a Deep Geological Repository

    SciTech Connect (OSTI)

    Poinssot, Christophe; Ferry, Cecile; Poulesquen, Arnaud

    2007-07-01

    Spent Nuclear Fuel (SNF) source terms are used to define the release rate of radionuclides (RN) in a direct disposal and to assess the performance of this waste form. They classically distinguish between two contributions: (i) the Instant Release Fraction (IRF) of RN which are directly leached when water contacts the fuel, (ii) the slow and long term release of RN which are embedded within the fuel matrix. Recent experimental results bring significant input in our understanding and assessment of both contributions. However, they have not yet been integrated in the definition of the SNF source term. This paper will present the impact on the RN source term of the latest results on the SNF long term evolution and the key remaining scientific issues. (authors)

  18. News Releases - 2016

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases » News Releases - 2016 News Releases - 2016 We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. August» July» June» May» April» March» February» January» James TenCate James TenCate elected Acoustical Society of America fellow TenCate's research focuses on nonlinear acoustics and elasticity, seismology and nonlinear imaging. - 8/30/16 The thermal traits of a leaf,

  19. DOCUMENT RELEASE FORM C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RELEASE FORM C (1) Document Number: RPP-RPT-431 74 (2) Revision Number: (3) Effective Date: 9/30/2009 (4) Document Type: El Digital Image El Hard copy (a) Number of pages (including the DRF) or 107 E PDF E] Video number of digital images (5) Release Type 0 New El Cancel El Page Change El complete Revision (6) Document Title: 2009 Auto-TOR for Tank 241 -T-204 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure Location: (c)

  20. Air Monitoring Modeling of Radioactive Releases During Proposed PFP Complex Demolition Activities

    SciTech Connect (OSTI)

    Napier, Bruce A.; Droppo, James G.; Rishel, Jeremy P.

    2011-01-24

    This report is part of the planning process for the demolition of the 234-5Z, 236-Z, 242-Z, and 291-Z-1 structures at the Plutonium Finishing Plant (PFP) facilities on the Hanford Site. Pacific Northwest National Laboratory (PNNL) supports the U.S. Department of Energy (DOE) and the CH2M HILL Plateau Remediation Company (CHPRC) demolition planning effort by making engineering estimates of potential releases for various potential demolition alternatives. This report documents an analysis considering open-air demolition using standard techniques. It does not document any decisions about the decommissioning approaches; it is expected that this report will be revisited as demolition plans are finalized.

  1. EIA - Annual Energy Outlook 2016 Early Release

    U.S. Energy Information Administration (EIA) Indexed Site

    ‹ Analysis & Projections AEO2016 Early Release: Summary of Two Cases Release Date: May 17, 2016 | Full Report Release Date: July 7, 2016 | Report Number: DOE/EIA-0383ER(2016) This release is an annotated PowerPoint summary and the data for two cases from the Annual Energy Outlook 2016-the Reference case and the No Clean Power Plan case. The AEO2016 full version, including additional cases and discussion, will be released July 7, 2016. Download the AEO2016 Early Release: An Annotated

  2. Large Releases from CO2 Storage Reservoirs: A Discussion ofNatural Analogs, FEPS, and Modeling Needs

    SciTech Connect (OSTI)

    Birkholzer, J.; Pruess, K.; Lewicki, J.L.; Rutqvist, J.; Tsang,C-F.; Karimjee, A.

    2005-11-01

    While the purpose of geologic storage in deep saline formations is to trap greenhouse gases underground, the potential exists for CO{sub 2} to escape from the target reservoir, migrate upward along permeable pathways, and discharge at the land surface. In this paper, we evaluate the potential for such CO{sub 2} discharges based on the analysis of natural analogs, where large releases of gas have been observed. We are particularly interested in circumstances that could generate sudden, possibly self-enhancing release events. The probability for such events may be low, but the circumstances under which they occur and the potential consequences need to be evaluated in order to design appropriate site-selection and risk-management strategies. Numerical modeling of hypothetical test cases is suggested to determine critical conditions for large CO{sub 2} releases, to evaluate whether such conditions may be possible at designated storage sites, and, if applicable, to evaluate the potential impacts of such events as well as design appropriate mitigation strategies.

  3. Air Dispersion Modeling of Radioactive Releases During Proposed PFP Complex Demolition Activities

    SciTech Connect (OSTI)

    Napier, Bruce A.; Droppo, James G.; Rishel, Jeremy P.

    2011-01-11

    This report is part of the planning process for the demolition of the 234-5Z, 236-Z, 242-Z, and 291-Z-1 structures at the Plutonium Finishing Plant (PFP) on the Hanford Site. Pacific Northwest National Laboratory (PNNL) supports the U.S. Department of Energy (DOE) and the CH2M HILL Plateau Remediation Company (CHPRC) demolition planning effort by making engineering estimates of potential releases for various potential demolition alternatives. This report documents an analysis considering open-air demolition using standard techniques. It does not document any decisions about the decommissioning approaches; it is expected that this report will be revisited as the final details of the demolition are developed.

  4. Fuel Performance Experience, Analysis and Modeling: Deformations, Fission Gas Release and Pellet-Clad Interaction

    SciTech Connect (OSTI)

    Zhou, G.; Hallstadius, L.; Helmersson, S.; Massih, A.R.; Schrire, D.; Kaellstroem, R.; Wikmark, G.; Hellwig, C.

    2007-07-01

    Some basic attributes of light water reactor fuel performance, determined by measurements, are evaluated. In particular, data on fuel volume swelling, cladding creep/growth, fission product gas release and cladding deformation due to pellet-clad mechanical interaction of rods irradiated in power reactors to rod burnups up to about 70 MWd/kgU are presented and appraised. A thermal fuel matrix swelling caused by fission products shows a linear increase in the fuel volume fraction with burnup up to 70 MWd/kgU with a mean rate of 0.76% per 10 MWd/kgU at a best-estimate level. Cladding hoop strain data due to in-reactor creep as a function of burnup from 15 to 70 MWd/kgU for pressurized water reactor (PWR) rods and from 5 to 50 MWd/kgU for boiling water reactor (BWR) rods are presented. The maximum measured cladding creep-down hoop strain in the considered BWR rods is {epsilon}{sub {theta}} {approx_equal} -0.5% and in the PWR rods {epsilon}{sub {theta}} {approx_equal} -1.25%. Rod growth data on BWR and PWR rods as a function of burnup are presented and discussed. Rod internal free volume data, measured and calculated as a function of burnup, are presented. Recent high burnup (52-70 MWd/kgU) fission product gas release data obtained by destructive methods are evaluated with the STAV7 computer code. Finally, slow power ramp experiments conducted at the Studsvik R2 reactor are simulated with the STAV7 code and it is observed that by accounting the contribution of fuel thermal gaseous swelling, the code describes the clad diameter increase due to pellet-clad mechanical interaction under the power bump satisfactorily. (authors)

  5. Modeling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Sandia Labs Releases New Version of PVLib Toolbox Sandia has released version 1.3 of PVLib, its widely used Matlab toolbox for modeling photovoltaic (PV) power ...

  6. Multi-scale Atmospheric Modeling of Green House Gas Dispersion in Complex Terrain. Controlled Release Study

    SciTech Connect (OSTI)

    Costigan, Keeley Rochelle; Sauer, Jeremy A.; Dubey, Manvendra Krishna

    2015-07-10

    This report discusses the ghgas IC project which when applied, allows for an evaluation of LANL's HIGRAD model which can be used to create atmospheric simulations.

  7. News Releases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Releases News Releases Accessible by Topic, Keywords (See "Search Releases") or Chronologically (See "ALL") News Releases Science Briefs Photos Picture of the Week Publications Social Media Videos Fact Sheets The thermal traits of a leaf, critical for photosynthesis, may be under strong evolutionary selection that occurs in response to environmental temperatures. Here a thermal leaf image details temperature variation, which greatly affects plant functions since

  8. Unsteady flow model of Priest Rapids Dam releases at Hanford Reach, Columbia River, Washington

    SciTech Connect (OSTI)

    Sneider, S.C.; Skaggs, R.L.

    1983-02-01

    A model was developed to simulate water levels at three locations on the Columbia River between Priest Rapids Dam River Mile 396.1 (River Kilometer 639.0) and River Mile 361.50 (River Kilometer 581.7). The model was calibrated and verified over a range of flows. The results of calibration and verification indicate that the model, with reasonable accuracy, simulates stages to within +-0.08 m (+- 0.25 ft) and surface wave timing to within +-20 min. The model can be used by researchers, river system managers, planners, and decision makers as a tool to predict fluctuating water levels at locations downstream of dams. Data produced by the model can be used to evaluate and quantify possible impacts on aquatic organisms, water supply, navigation, irrigation, recreation, and additional hydropower enhancement. Although the results of this model calibrationand the model simulations presented are site-specific, the methodology is generic. Therefore, the model can be adapted to reflect dam discharges and resulting river flows at other river systems affected by water-level fluctuations.

  9. DOCUMENT RELEASE FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 (2) Revision Number: 0 (3) Effective Date: 9/28/2009 (4) Document Type: [] Digital Image El Hard copy (a) Number of pages (including the DRF) or 74 0PDF E] Video number of digital images (5) Release Type E New El cancel l Page Change El complete Revision (6) Document Title: 2009 Auto-TCR for Tank 241-13-204 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure Location: (c) Building Number: Structure, System, and Component N/A

  10. DOCUMENT RELEASE FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    31 97 (2) Revision Number: 0 -- (3) Effective Date: 9/30/2009 (4) Document Type: E] Digital Image l Hard copy (a) Number of pages (including the DRF) or 84 0 POE E Video number of digital images (5) Release Type Z New 1:1 Cancel liiPage Change Elcomplete Revision (6) Document Title: 2009 Auto-TOR for Tank 241 -TY-1 05 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure Location: (c) Building Number: Structure, System, and

  11. Web-based DOE/ORNL Heat Pump Design Model Released

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE/Oak Ridge National Laboratory's (ORNL) Heat Pump Design Model (HPDM), a hardware-based vapor-compression system research and design tool originally developed in the mid-1970s, remains cutting edge through continuous evolution.

  12. Dating the Vinland Map

    ScienceCinema (OSTI)

    None

    2013-07-17

    Scientists from Brookhaven National Laboratory, the University of Arizona, and the Smithsonian Institution used carbon-dating technology to determine the age of a controversial parchment that might be the first-ever map of North America.

  13. DATE: REPLY TO

    Office of Legacy Management (LM)

    DOE F 1325.8 (NW ed States Governhent ilmemorandum DATE: REPLY TO ' bPfl29 1993 Al-fN OF: EM-421 (W. W illiams, 903-8149) SUBJECT: Authorization for Remedial Action at the Former...

  14. DATE SUBMITTED: GRADE LEVEL:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    two total hours per visit. For more students than that, please plan a visit on another date. To make a request, please complete the form below and submit it to...

  15. HEMORANDUH TO: FILE DATE

    Office of Legacy Management (LM)

    HEMORANDUH TO: FILE DATE 1123 lLjl ---WV-------------- FROM: P. s&w+ -------v-----s-- SUBJECT: lJ+ - e;& SITE NAME: LJo"zL - /L,' de Cd -J--h=- ALTERNATE l --e-e-- ------w------- ---,,,' ,m--, NAME: ---------------------- CITY: LL-pL~ ------------ ------------- STATE3 e--w-- OWNER tS) -----w-- Past I --k-!!.l~ -pa L . -v-----w------- Current: Owner contac?-ed 0 yes 0 no; if yes, I+Lff A zid;&m - -------------------------- date contacted ------B--m--- TYPE OF OPERATION

  16. Uranium Marketing Annual Report - Release Date: May 31, 2011

    Gasoline and Diesel Fuel Update (EIA)

    1. Unfilled uranium market requirements of owners and operators of U.S. civilian nuclear ... Source: U.S. Energy Information Administration, Form EIA-858 "Uranium Marketing Annual ...

  17. Uranium Marketing Annual Report - Release Date: May 31, 2011

    Gasoline and Diesel Fuel Update (EIA)

    4. Uranium purchased by owners and operators of U.S. civilian nuclear power reactors by origin and material type, 2015 deliveries thousand pounds U3O8 equivalent; dollars per pound U3O8 equivalent Deliveries Uranium concentrate Natural UF6 Enriched UF6 Natural UF6 and Enriched UF6 Total U.S.-origin uranium Purchases 2,733 W W 686 3,419 Weighted-average price 46.23 W W 34.44 43.86 Foreign-origin uranium Purchases 28,179 W W 24,927 53,106 Weighted-average price 43.61 W W 44.77 44.14 Total

  18. Report No. U.S. Department of Eney Release Date:

    Energy Savers [EERE]

    ... Range 2 was built in the 1950's and is used primarily for tactics training. This range, which is small in size, is also used for pistol and submachine gun training on a contingency ...

  19. MEMORANDUfl J: FILE DATE

    Office of Legacy Management (LM)

    J: FILE DATE r so ---...w------m FROM: 9. 34oyc -w---...v----- SUBJECT: D3 Bo;s CL&;C J mL-;+J; - Rcc cap 049 'A :j: &336;s L-.fh w-f L-1 ALE"nirTE ---...

  20. MODEL IMPLEMENTATION TO EVALUATE THE COLLECTIVE FUTURE RADIONUCLIDE RELEASES FROM MULTIPLE FACILITIES AT THE SAVANNAH RIVER SITE

    SciTech Connect (OSTI)

    Hiergesell, R.; Smith, F.; Hamm, L.; Phifer, M.; Swingle, R.

    2009-12-15

    A comprehensive Composite Analysis (CA) has been performed considering 152 sources of residual radioactive material at the Savannah River Site (SRS). As part of the CA a model was developed to perform deterministic base case calculations using the commercial GoldSim software. The model treated transport and decay of radionuclides as they are released at the source location and transported through the source region, vadose zone and aquifer to stream outcrops and from there to the Savannah River. A dose to the public was calculated assuming recreational use of stream water and residential use of river water. The specific results from the GoldSim modeling evaluation conducted as part of the CA indicate that the collective maximum dose resulting from the release of radionuclides from all 152 anticipated SRS End State sources of residual radionuclides demonstrate that maximum exposures expected to occur to any offsite MOP will not approach the 300 uSv/yr (30 mrem/yr) dose constraint, and in fact are currently estimated to be only 10% of this. For each of the POA's evaluated, the highest cumulative dose is realized at the Lower Three Runs POA and is calculated to be 29.7 uSv/yr (2.97 mrem/yr). The major dose contributing radionuclide for all of the POA's, with the exception of Upper Three Runs, was {sup 137}Cs in the contaminated streambed sediments. In Upper Three Runs {sup 237}Np from the H-Area Canyon Building was the major dose contributing radionuclide. The major exposure pathway for the SRS streams (where the Recreational Scenario was evaluated) was by the ingestion of fish. In the Savannah River, where the Residential Scenario was evaluated, ingestion of vegetation was the dominant exposure pathway. The uncertainty evaluation lends added assurance to the conclusion that the 30 mrem/yr dose constraint will not be exceeded, in that even at the 95th Percentile, this performance measure is not expected to be exceeded. It must also be added that these conclusions

  1. DATE: TO: FROM:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    POLICY FLASH 2015-30 DATE: TO: FROM: June 18, 2015 Procurement Directors/Contracting Officers ~~-- Chief Contract and Financial Assistance Policy Division Office of Policy Office of Acquisition and Project Management SUBJECT: Clarification on the Drug Testing Custody and Control Form for Department of Energy Contractors SUMMARY: Effective immediately, please ensure that all DOE contractors use the Forensic Drug Testing Custody and Control Form for their drug testing programs to comply with the

  2. News Release Closure of Russian Nuclear Plant.PDF

    National Nuclear Security Administration (NNSA)

    CONTACTS: FOR IMMEDIATE RELEASE Jonathan Kiell, 202586-7371 September 27, 2001 Date Set for Closure of Russian Nuclear Weapons Plant U.S. National Nuclear Security Administration ...

  3. NOON TUESDAY: Energy Department to Release New Report on Progress...

    Broader source: Energy.gov (indexed) [DOE]

    Affairs, will host a conference call with reporters to release a new DOE report on electric vehicles. The report will examine progress to date in meeting President Obama's...

  4. DOCUMENT RELEASE FORM G5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOCUMENT RELEASE FORM G5 (1) Document Number: RPP-RPT-431 69 (2) Revision Number: 0 (3) Effective Date: 9/30/2009 (4) Document Type: E] Digital Image l Hard copy (a) Number of pages (including the IDRF) or 125 E PDF ElVideo number of digital images (5) Release Type Z New 0 Cancel El Page Change l complete Revision (6) Document Title: 2009 Auto-TCR for Tank 241 -T-1 11 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure

  5. Use Release Instruction form in Site Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Release 77 TABLE OF CONTENTS September 23, 2015 Rev 1 Page 1 MAIN TABLE OF CONTENTS Effective Date 1.0 INTRODUCTION 042414 2.0 RESPONSIBILITIES 092315 3.0 CRITICAL, SPECIAL,...

  6. United States Government DATE:

    Office of Legacy Management (LM)

    5oE(E;,8 ' 0 H .2+ L-1 United States Government DATE: MAR 0 8 1994 REPLY TO AlTN OF: EM-421 (W. A. Williams, 903-8149) SUBJECT: Authority Determination -- Former Herring-Hall-Marvin Safe Co., Hamilton, Ohio TO: The File The attached review documents the basis for determining whether the Department of Energy (DOE) has authority for taking remedial action at the former Herring-Hall-Marvin Safe Co. facility in Hamilton, Ohio, under the Formerly Utilized Sites Remedial Action Program (FUSRAP). The

  7. SPECIAL DATE AND TIME

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SPECIAL DATE AND TIME Evolving views of the outer solar system: new insights from NASA's New Horizons mission's historic first Pluto fly-by Dr. Kimberly Ennico Smith NASA Ames Research Center, Astrophysics Branch April 11, 2016 2:00 p.m. - Wilson Hall, One West On July 14, 2015, after a 9.5 year trek across the solar system, NASA's New Horizons spacecraft successfully flew by Pluto and its system of moons, taking imagery, spectra and in-situ particle data. In this internet- information age, this

  8. Source Term Estimation of Radioxenon Released from the Fukushima Dai-ichi Nuclear Reactors Using Measured Air Concentrations and Atmospheric Transport Modeling

    SciTech Connect (OSTI)

    Eslinger, Paul W.; Biegalski, S.; Bowyer, Ted W.; Cooper, Matthew W.; Haas, Derek A.; Hayes, James C.; Hoffman, Ian; Korpach, E.; Yi, Jing; Miley, Harry S.; Rishel, Jeremy P.; Ungar, R. Kurt; White, Brian; Woods, Vincent T.

    2014-01-01

    Systems designed to monitor airborne radionuclides released from underground nuclear explosions detected radioactive fallout from the Fukushima Daiichi nuclear accident in March 2011. Atmospheric transport modeling (ATM) of plumes of noble gases and particulates were performed soon after the accident to determine plausible detection locations of any radioactive releases to the atmosphere. We combine sampling data from multiple International Modeling System (IMS) locations in a new way to estimate the magnitude and time sequence of the releases. Dilution factors from the modeled plume at five different detection locations were combined with 57 atmospheric concentration measurements of 133-Xe taken from March 18 to March 23 to estimate the source term. This approach estimates that 59% of the 1.24×1019 Bq of 133-Xe present in the reactors at the time of the earthquake was released to the atmosphere over a three day period. Source term estimates from combinations of detection sites have lower spread than estimates based on measurements at single detection sites. Sensitivity cases based on data from four or more detection locations bound the source term between 35% and 255% of available xenon inventory.

  9. Press Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 29, 2013 CORRECTED: DOE, Nevada Announce Public Meetings on Nuclear Waste Shipments Following Successful First Meeting of the Working Group, DOE Officials Will Brief Nevadans in November WASHINGTON - Today, the U.S. Department of Energy (DOE) and the State of Nevada announced the dates for two public meetings in Nevada on critical departmental efforts in the state. The public meetings will offer an opportunity for an open dialogue with the public on the Consolidated Edison Uranium

  10. code release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    code release - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy

  11. Sandia Energy - Sandia Releases Open-Source Hydrokinetic Turbine...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases Open-Source Hydrokinetic Turbine Design Model, CACTUS Home Renewable Energy Energy Water Power News News & Events Computational Modeling & Simulation Sandia Releases...

  12. Posting Date: July 16, 2015 Posting Close Date: TBD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 16, 2015 Posting Close Date: TBD North American Industry Classification System (NAICS) code for the request: 812332 Estimated SubcontractPO Value TBD Estimated Period of...

  13. Posting Date: 28 May, 2015 Posting Close Date: TBD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Estimated Award Date: TBD Competition Type: TBD Buyer Contact Email: Itmartinez@lanl.gov Title: QA Support Description of Product or Service Required QA Support (Current...

  14. Improved Meteorological Input for Atmospheric Release Decision support Systems and an Integrated LES Modeling System for Atmospheric Dispersion of Toxic Agents: Homeland Security Applications

    SciTech Connect (OSTI)

    Arnold, E; Simpson, M; Larsen, S; Gash, J; Aluzzi, F; Lundquist, J; Sugiyama, G

    2010-04-26

    When hazardous material is accidently or intentionally released into the atmosphere, emergency response organizations look to decision support systems (DSSs) to translate contaminant information provided by atmospheric models into effective decisions to protect the public and emergency responders and to mitigate subsequent consequences. The Department of Homeland Security (DHS)-led Interagency Modeling and Atmospheric Assessment Center (IMAAC) is one of the primary DSSs utilized by emergency management organizations. IMAAC is responsible for providing 'a single piont for the coordination and dissemination of Federal dispersion modeling and hazard prediction products that represent the Federal position' during actual or potential incidents under the National Response Plan. The Department of Energy's (DOE) National Atmospheric Release Advisory Center (NARAC), locatec at the Lawrence Livermore National Laboratory (LLNL), serves as the primary operations center of the IMAAC. A key component of atmospheric release decision support systems is meteorological information - models and data of winds, turbulence, and other atmospheric boundary-layer parameters. The accuracy of contaminant predictions is strongly dependent on the quality of this information. Therefore, the effectiveness of DSSs can be enhanced by improving the meteorological options available to drive atmospheric transport and fate models. The overall goal of this project was to develop and evaluate new meteorological modeling capabilities for DSSs based on the use of NASA Earth-science data sets in order to enhance the atmospheric-hazard information provided to emergency managers and responders. The final report describes the LLNL contributions to this multi-institutional effort. LLNL developed an approach to utilize NCAR meteorological predictions using NASA MODIS data for the New York City (NYC) region and demonstrated the potential impact of the use of different data sources and data parameterizations on

  15. Application of a watershed computer model to assess reclaimed landform stability in support of reclamation liability release

    SciTech Connect (OSTI)

    Peterson, M.R.; Zevenbergen, L.W.; Cochran, J.

    1995-09-01

    The Surface Mining Control and Reclamation Act of 1977 (SMCRA) instituted specific requirements for surface coal mine reclamation that included reclamation bonding and tied release of liability to achieving acceptable reclamation standards. Generally, such reclamation standards include successfully revegetating the site, achieving the approved postmine land use and minimizing disturbances to the prevailing hydrologic balance. For western surface coal mines the period of liability continues for a minimum of 10 years commencing with the last year of augmented seeding, fertilizing, irrigation or other work. This paper describes the methods and procedures conducted to evaluate the runoff and sediment yield response from approximately 2,700 acres of reclaimed lands at Peabody Western Coal Company`s (PWCC) Black Mesa Mine located near Kayenta, Arizona. These analyses were conducted in support of an application for liability release submitted to the Office of Surface Mining (OSM) for reclaimed interim land parcels within the 2,700 acres evaluated.

  16. Final Report - Enhanced LAW Glass Property - Composition Models - Phase 1 VSL-13R2940-1, Rev. 0, dated 9/27/2013

    SciTech Connect (OSTI)

    Kruger, Albert A.; Muller, I.; Gilbo, K.; Joseph, I.; Pegg, I. L.

    2013-11-13

    The objectives of this work are aimed at the development of enhanced LAW propertycomposition models that expand the composition region covered by the models. The models of interest include PCT, VHT, viscosity and electrical conductivity. This is planned as a multi-year effort that will be performed in phases with the objectives listed below for the current phase.  Incorporate property- composition data from the new glasses into the database.  Assess the database and identify composition spaces in the database that need augmentation.  Develop statistically-designed composition matrices to cover the composition regions identified in the above analysis.  Prepare crucible melts of glass compositions from the statistically-designed composition matrix and measure the properties of interest.  Incorporate the above property-composition data into the database.  Assess existing models against the complete dataset and, as necessary, start development of new models.

  17. Dates Fact Sheet.cdr

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The DATES monitoring platform uses multiple algorithms to examine packet headers, including a Snort sensor enhanced with a SCADA-aware rule set, stateful protocol analysis, and a ...

  18. Release of UF/sub 6/ from a ruptured model 48Y cylinder at Sequoyah Fuels Corporation Facility: lessons-learned report

    SciTech Connect (OSTI)

    Not Available

    1986-08-01

    The uranium hexafluoride (UF/sub 6/) release of January 4, 1986, at the Sequoyah Fuels Corporation facility has been reviewed by a NRC Lessons-Learned Group. A Model 48Y cylinder containing UF/sub 6/ ruptured upon being heated after it was grossly overfilled. The UF/sub 6/ released upon rupture of the cylinder reacted with airborne moisture to produce hydrofluoric acid (HF) and uranyl fluoride (UO/sub 2/F/sub 2/). One individual died from exposure to airborne HF and several others were injured. There were no significant immediate effects from exposure to uranyl fluoride. This supplement report contains NRC's response to the recommendations made in NUREG-1198 by the Lessons Learned Group. In developing a response to each of the recommendations, the staff considered actions that should be taken: (1) for the restart of the Sequoyah Fuels Facility; (2) to make near-term improvement; and (3) to improve the regulatory framework.

  19. Property:Deployment Date | Open Energy Information

    Open Energy Info (EERE)

    Deployment Date Jump to: navigation, search Property Name Deployment Date Property Type String Retrieved from "http:en.openei.orgwindex.php?titleProperty:DeploymentDate&oldid...

  20. Property:Achievement Date | Open Energy Information

    Open Energy Info (EERE)

    Achievement Date Jump to: navigation, search Property Name Achievement Date Property Type String Retrieved from "http:en.openei.orgwindex.php?titleProperty:AchievementDate&ol...

  1. L4:PHI.REL.P8.01 VERA Release Notes ID: 2013 VERA RSICC Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    L4:PHI.REL.P8.01 VERA Release Notes ID: 2013 VERA RSICC Release (VERA 3.2) Matt Sieger Oak Ridge National Laboratory November 16, 2013 CASL-U-2014-0172-000 DRAFT VERA Release Notes Document VERA Release Notes (DRAFT) Release ID 2013 VERA RSICC Release (VERA 3.2) Release Date Sept. 30, 2013 Support Information Email questions or comments to the VERA development team at casl-support@CASL.gov 1. Introduction VERA, a "Virtual Environment for Reactor Applications", is a collection of

  2. Event reconstruction for line source releases

    SciTech Connect (OSTI)

    Zajic, Dragan; Brown, Michael J; Williams, Michael D

    2010-01-01

    The goal of source inversion, also called event reconstruction, is the calculation of source parameters from information obtained by network of concentration (or dosage) and meteorological sensors. Source parameters include source location and strength, but in certain cases there could be more than one source so the inversion procedure could deal with determination of number of sources, as well. In a case of limited time period pollutant emission events, as for example during accidents or intentional releases, it is of great use to estimate starting and ending times of the event. This kind of research is very useful for estimating the source parameters of industrial pollutants since it provides important information for regulation purposes. Also it provides information to fast responders in a case of accidental pollutant releases or for homeland security needs when chemical, biological or radiological agent is deliberately released. Development of faster and more accurate algorithms is very important since it could help reduce the populace's exposure to dangerous airborne contaminants, plan evacuation routes, and help assess the magnitude of clean up. During the last decade, the large number of research papers in area of source inversion was published where many different approaches were used. Most of the source inversion work publish to date apply to point source releases. The forward dispersion models used range from fast Gaussian plume and puff codes that enable almost instantaneous calculations of concentrations and dosages to Computational Fluid Dynamics (CFD) codes that provide more detailed and precise calculation but at the same time are expensive with respect to time and computer resources. The optimization methods were often used and examples are simulated annealing and genetic algorithms.

  3. Press Releases - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Newsroom Press Releases Newsroom Press Releases Media Contacts Photo Gallery The Hanford Story Hanford Blog Hanford YouTube Channel

  4. A Variable Trajectory Plume Segment Model to Assess Ground-Level Air Concentrations and Depositions of Routine Effluent Releases from Nuclear Power Facilities.

    Energy Science and Technology Software Center (OSTI)

    1986-05-27

    Version: 00 MESODIF-II, which embodies a variable trajectory plume segment atmospheric transport model, is designed to predict normalized air concentrations and deposition of radioactive, but otherwise non-reactive, effluents released from one or two levels over the same position in an xy-plane. In such a model, calculated particle trajectories vary as synoptic scale wind varies. At all sampling times, the particles are connected to form a segmented plume centerline. The lateral and vertical dimensions of themore » plume are determined by a parameterization of turbulence scale diffusion. The impetus for the development of this model arose from the need of the U. S. Nuclear Regulatory Commission to assess radiological effects resulting from routine nuclear power reactor operations, as outlined in U. S. Nuclear Regulatory Guide 1.111.« less

  5. Cryogenic hydrogen release research.

    SciTech Connect (OSTI)

    LaFleur, Angela Christine

    2015-12-01

    The objective of this project was to devolop a plan for modifying the Turbulent Combustion Laboratory (TCL) with the necessary infrastructure to produce a cold (near liquid temperature) hydrogen jet. The necessary infrastructure has been specified and laboratory modifications are currently underway. Once complete, experiments from this platform will be used to develop and validate models that inform codes and standards which specify protection criteria for unintended releases from liquid hydrogen storage, transport, and delivery infrastructure.

  6. Date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... We will provide a letter template to you. Sandia will treat all aspects of this engagement as privileged and confidential. We will not disclose any engagement-related information ...

  7. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Impact The action consists of purchasing equipment to be used in research and teaching. The action would not create additional environmental impacts above those already...

  8. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CAES-061 292012 Rev. 04 CAES Microscopy & Characterization Suite (MaCS) Service Request Form Page 1 of 2 Contact Information: Requestor Name: *Researcher Name: Requestor Email:...

  9. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Transuranic elements are accumulated in the electrorefining salt and extracted as a uraniumtransuranicrare earth product using a liquid cadmium cathode (LCC) in order to acquire ...

  10. DATE:

    Broader source: Energy.gov (indexed) [DOE]

    For questions concerning this policy flash, contact Kevin M. Smith at (202) 287-1614 or at Kevin.M.Smith@hq.doe.gov. Contracting Officers should contact their field counsel, the ...

  11. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Standards and Corrective Action Requirements for Owners and Operators of Underground Storage Tanks"). These actions do not include rebuilding or modifying substantial portions of...

  12. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with a pressure relief valve that discharges to the gas flare or fume hood exhaust. ... from the hydrogen line pressure relief valve to prevent uncontrolled accumulation or ...

  13. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Air System Drain Line Modification and Valve Replacement SECTION B. Project ... on M-6, M-8 and M-9; install a new check valve in the compressed air system auxiliary ...

  14. Date:

    Office of Legacy Management (LM)

    Tetra Tech developed design flow rates from these rainfall depths and evaluated the ... Design precipitation depths of 3.7 and 5.5 inches yielded runoff depths of 2.3 and 3.9 ...

  15. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The cooling unit will be specified to meet ASHRAE 90.1, "Energy Standard for Buildings Except Low-Rise Residential Buildings" or "DOE Energy Star" as appropriate. SECTION D. ...

  16. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SECTION A. Project Title: In situ Raman Spectroscopy to Enhance Nuclear Materials Research and Education - University of Nevada Reno SECTION B. Project Description The University ...

  17. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    removed would be evaluated (mercury switches) and managed appropriately. Polychlorinated Biphenyls (PCBs) may be encountered in items painted prior to 1980. All waste would be ...

  18. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Any switches that are removed would be evaluated (mercury switches) and managed appropriately. Polychlorinated Biphenyls (PCBs) and lead may be encountered in items painted prior ...

  19. DATE:

    Office of Legacy Management (LM)

    Ohio TO: W. Seay, DOE Oak Ridge Field Office The former Associate Aircraft Tool and Manufacturing, Inc., site at 3660 Dixie Highway, Fairfield, Ohio, is designated for remedial...

  20. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    successfully form dense U 3 Si 2 pellets with a density greater than 94% of theoretical. ... apparatus into dense ceramic pellets for characterization by spark plasma sintering. ...

  1. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A container(s) of hazardous debris andor RLS is placed inside the macrobagliner system and void space filler (e.g. vermiculite, foam pellets, etc.) is added to fill the package ...

  2. DATE:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    has been revised. The subject form has been posted on the DOE Financial Assistance web page on the Recipients Page under the Financial Assistance Forms and Information for...

  3. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    water system and will be coated on both exterior and interior surfaces to prevent corrosion. All valves and lines will be closed off to the construction area until the new tank...

  4. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    09 SECTION A. Project Title: High Temperature Melt Solution Calorimeter: The Thermodynamic Characterization of Oxides n Nuclear Energy - Clemson University SECTION B. Project...

  5. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The craftsmen also need another wash sink in the East Bay. The current method of ... The East Bay will require a new power panel with power run from the main distribution ...

  6. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    generate high fidelity thermal stratification and flow field data under various geometric and physical conditions for scaled modes of outlet plena in sodium-cooled fast reactors. ...

  7. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CX Posting No.: DOE-ID-INL-10-008 SECTION A. Project Title: Maintenance and Modification ... provide corrective and preventative maintenance that would prevent or minimize future ...

  8. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SECTION A. Project Title: ICP Routine Maintenance SECTION B. Project Description The ... types of actions, such as routine maintenance, minor modifications, and custodial ...

  9. Dated:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CERTIFICATE OF SERVICE I hereby certify that a copy of the STIPULATED JOINT MOTION TO STAY THE SCHEDULING ORDER has been sent electronically to the following on May 12, 2015:...

  10. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This security building is located on Taylor Blvd approximately one mile south of the Materials and Fuels Complex (MFC) and already houses a Vehicle Explosives Detection System...

  11. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6-002 SECTION A. Project Title: Experimental Verification of Post-Accident iPWR Aerosol Behavior - Electric Power Research Institute, Inc. SECTION B. Project Description EPRI ...

  12. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    42 SECTION A. Project Title: Innovative Manufacturing Process for Improving the Erosion/Corrosion Resistance of Power Plant Components via Powder Metallurgy & Hot Isostatic Processing Methods - Electric Power Research Institute SECTION B. Project Description The objective of this project is to conduct the necessary design, processing, manufacturing, and validation studies to assess powder metallurgy/hot isostatic processing (PM/HIP) as a method to produce very large near-net shaped (NNS)

  13. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 SECTION A. Project Title: Development of a Research and Education Facility for Evaluation of Environmental Degradation of Advanced Nuclear Materials in Simulated LWR Conditions - University of Idaho SECTION B. Project Description The University of Idaho proposes to a) upgrade the existing static autoclave system in order to simulate the light water reactor conditions without contaminating the high temperature waster with corrosion products; b) install a rotating a cylinder system in the

  14. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SECTION A. Project Title: Nuclear Materials Science and Instrumentation Research Infrastructure Upgrade at Pennsylvania State University SECTION B. Project Description Pennsylvania State University proposes to purchase and install an inductively coupled plasma - atomic emission spectrometer (ICP- AES), glass melting furnace and crucible, and data acquisition system for use in research and education. SECTION C. Environmental Aspects / Potential Sources of Impact Chemical Use/Storage / Chemical

  15. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 SECTION A. Project Title: Integrated Approach to Fluoride High Temperature Reactor (FHR) Technology and Licensing Challenges - Georgia Tech SECTION B. Project Description Georgia Tech, in collaboration with Ohio State University, Texas A&M, Texas A&M - Kingsville, Oak Ridge National Laboratory and several industry and international partners, proposes to follow an integrated approach to address several key technology gaps associated with fluoride high temperature reactors, thereby

  16. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SECTION A. Project Title: Solving Critical Challenges to Enable the Xe-100 Pebble Bed Advanced Reactor Concept - X Energy, LLC SECTION B. Project Description X Energy, in collaboration with BWXT Nuclear Energy, Inc. (BWXT), Oak Ridge National Laboratory (ORNL), Idaho National Laboratory (INL), and Oregon State University (OSU), proposes to leverage prior and current DOE programs and previous Xe-100 design investments to further key pebble-bed high temperature gas-cooled reactor (HTGR)

  17. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SECTION A. Project Title: DOE-EM Traineeship in Robotics - Carnegie Mellon University SECTION B. Project Description Carnegie Mellon University (CMU) proposes to develop an Environmental Management (EM) Traineeship in robotics. The traineeship will build on the existing core robotics curricula while introducing specialized topics that ensure a thorough understanding of EM-relevant concerns. The proposed program will also incorporate supervised research opportunities with CMU faculty advisors

  18. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 SECTION A. Project Title: CFA-16-12043: Using Radioiodine Speciation to Address Environmental Remediation and Waste Stream Sequestration Problems at the Fukushima Daiichi Nuclear Power Plant and a DOE Site, MS-EM-1: Radioactive Waste Management - Texas A&M University - Galveston SECTION B. Project Description Texas A&M University - Galveston proposes to 1) measure radioiodine speciation to provide information that will be used in the development of species-specific stabilization

  19. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SECTION A. Project Title: CFA-16-10285: Tribological Damage Mechanisms from Experiments and Validated Simulations of Alloy 800H and Inconel 617 in a Simulated HTGR/VHTR Helium Environment - Purdue University SECTION B. Project Description Purdue University proposes to perform a series of tribological experiments on Alloy 800H and Inconel 617 in a simulated He environment with controlled concentrations of gaseous species follow by microstructure characterization using electron microscopy,

  20. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SECTION A. Project Title: Integrated Computational Materials Engineering (ICME) and In-site Process Monitoring for Rapid Qualification of Components Made by Laser-Based Powder Bed Additive Manufacturing (AM) Processes for Nuclear Structural and Pressure Boundary Applications - Electric Power Research Institute SECTION B. Project Description The Electric Power Research Institute (EPRI) proposes to develop an innovative qualification strategy for complex nuclear components produced by laser

  1. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 SECTION A. Project Title: Online Monitoring System for Concrete Structures Affected by Alkali-Silica Reaction (ASR) - University of Nebraska, Lincoln SECTION B. Project Description The University of Nebraska, in collaboration with the University of Alabama, proposes to develop and employ two highly sensitive active and passive stress wave sensing techniques and advanced signal processing algorithms to monitor and quantify alkali-silica reaction-induced microcracking damage in concrete. SECTION

  2. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 SECTION A. Project Title: Feasibility of Combined Ion-Neutron Irradiation for Accessing High Dose Levels - University of Michigan SECTION B. Project Description The University of Michigan, in collaboration with the Oak Ridge National Laboratory (ORNL), proposes to assess the feasibility of re-irradiating existing neutron irradiated alloys 304SS and 316SS to high dose levels using ion irradiation, for the purpose of achieving microstructures that represent those from reactor irradiation to

  3. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 SECTION A. Project Title: Overcoming Kinetic Barriers to Actinide Recovery in ALSEP - Colorado School of Mines SECTION B. Project Description The Colorado School of Mines, in collaboration with the Argonne National Laboratory, proposes to test the hypothesis that slow kinetics in the solvent separation process ALSEP and its related separation systems, for the recovery of Am from the fission product lanthanide elements, originate in the poor ability of the aqueous complexants to penetrate and

  4. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 SECTION A. Project Title: Immobilization of High-Level Waste Salt in Dechlorinated Zeolite Waste Forms - University of Utah SECTION B. Project Description The University of Utah, in collaboration with Idaho National Laboratory, proposes to evaluate the main challenges associated with the disposal of electrorefiner salt: maximization of fission products in a final waste form and the associated processing costs. The proposed research will focus on two main objectives to overcome these process-

  5. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: ASME Code Application of the Compact Heat Exchanger for High Temperature Nuclear Service - North Carolina State University SECTION B. Project Description North Carolina State University proposes to characterize the high temperature materials properties of a diffusion welded laminated structure and to develop the ASME Code methodologies for preventing failure of a printed channel and hybrid compact heat exchangers under sustained and cyclic pressure and thermal loading

  6. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SECTION A. Project Title: Integral System Testing for Prismatic Block Core Design HTGR - Oregon State University SECTION B. Project Description Oregon State University proposes to complete eight integral thermal-fluid tests investigating a range of gas reactor events. This is planned as a two-year project and will be conducted in a gas-reactor thermal-fluid facility that is already in operation. The overall objective of the test program will be to collect data that will fully cover the

  7. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    28 SECTION A. Project Title: Localized Imaging, Surveying and Mapping for Nuclearized Underwater Robots - Carnegie Mellon University SECTION B. Project Description Carnegie Mellon University proposes to develop, demonstrate, and infuse a leap of sensing, robotics, spatial positioning and visualization capability into underwater nuclear operations relevant to DOE environmental management. The program will develop and demonstrate a prototype robotic system to maneuver in a water-filled basin,

  8. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    30 SECTION A. Project Title: Additive Manufacturing of Functional Materials and Sensor Devices for Nuclear Energy Applications - Boise State University SECTION B. Project Description Boise State University proposes to procure an aerosol jet printer and establish additive manufacturing capability to accelerate research and development of integrated sensor systems for nuclear energy applications. Procuring a versatile aerosol jet printer that can directly print functional semiconductors, metals,

  9. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 SECTION A. Project Title: An Integrated Multiscale Experimental-Numerical Analysis on Reconsolidation of Salt-Clay Mixture for Disposal of Heat-Generating Waste - Columbia University SECTION B. Project Description Columbia University, in collaboration with Sandia National Laboratory, proposes to improve the understanding of the thermal- hydrological-mechanical-chemical (THMC) coupling effect on the reconsolidation of granular salt-clay mixture used for the seal systems of shafts and drifts in

  10. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SECTION A. Project Title: Integration of Microwave Readout into Nuclear Process Monitoring - University of Colorado, Boulder SECTION B. Project Description The University of Colorado, in collaboration with Los Alamos National Laboratory and Savannah River National Laboratory, proposes to demonstrate that high-resolution γ-ray spectroscopy, based on emerging microcalorimeter sensors, can determine elemental and isotopic fractions with accuracy comparable to much slower mass spectrometry and

  11. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SECTION A. Project Title: Calorimeter for Nuclear Energy Teaching and Research - Washington State University SECTION B. Project Description Washington State University proposes to purchase and setup a new calorimeter for use with radioactive material at the university. The project would improve the capability of the university's Department of Chemistry for nuclear-related teaching and research. SECTION C. Environmental Aspects / Potential Sources of Impact The action consists of purchasing

  12. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 SECTION A. Project Title: Fission Product Transport in TRISO Fuel - University of Michigan SECTION B. Project Description The University of Michigan, in collaboration with Idaho National Laboragtory, proposes to measure diffusion coefficients of fission products in SiC under thermal and irradiation conditions, as well as, synergistic effects of radiation damage, and fission products behavior at the IPyC/SiC interface. The project will use a multi-layered diffusion couple developed at a NSUF

  13. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 SECTION A. Project Title: Development of a Comprehensive Two-phase Flow Database for the Validation of NEK-2P - Virginia Tech SECTION B. Project Description Virginia Polytechnic Institute and State University, in collaboration with Ohio State University and Argonne National Laboratory, proposes to perform detailed uncertainty quantification to determine the applicable ranges and associated measurement uncertainties in simulated two-phase boiling flows. The best combination of these techniques

  14. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 SECTION A. Project Title: Feasibility of Combined Ion-Neutron Irradiation for Accessing High Dose Levels - Florida International University SECTION B. Project Description Florida International University, in collaboration with the Idaho National Laboratory (INL), proposes to achieve the separation of Am from lanthanides by electrochemical oxidation of Am(III) to its higher oxidation states, Am(V) and AM(VI), through the design, and testing of new high surface area electrodes and porous sorbent

  15. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SECTION A. Project Title: Development of Reactor Thermal-Hydraulics and Safety Research Facilities at Kansas State University SECTION B. Project Description Kansas State University proposes to purchase advanced instrumentation for thermalhydraulics and reactor safety-related fundamental experiments. This instrumentation includes a high-speed multispectral infrared imaging system, a high-speed imaging system capable of recording up to 500,000 frames per second for flow visualization, a laser

  16. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: An Experimental Study of Design and Performance for the Water-based Reactor Cavity Cooling System - Texas A&M University SECTION B. Project Description Texas A&M University, in collaboration with the University of Wisconsin and Ultra Safe Nuclear Corporation, proposes to extend and enhance the experimental tests previously conducted using the existing water-cooled Reactor Cavity Cooling System (RCCS) in close collaboration with the water-cooled research team

  17. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SECTION A. Project Title: Wireless Reactor Power Distribution Measurement System Utilizing an In-Core Radiation and Temperature Tolerant Wireless Transmitter and a Gamma-Harvesting Power Supply - Westinghouse Electric Company SECTION B. Project Description Westinghouse Electric Company, in collaboration with the Pennsylvania State, proposes to design, manufacture, and operate a vacuum micro-electronic- (VME) based wireless transmitter that continuously broadcasts vanadium self-powered neutron

  18. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 SECTION A. Project Title: Earth Abundant High Temperature Materials for Radiological Power Conversion System SECTION B. Project Description The project consists of performing research and development using earth abundant elements to increase efficiencies to 20-30% through solid state alloying and composites of high temperature materials, thereby improving thermoelectric generator system performance without the need to invest in a single-purpose supply chain. Earth abundant high temperature

  19. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    49 SECTION A. Project Title: Tribological Behavior of Structural Materials in High Temperature Helium Gas-Cooled Reactor Environments SECTION B. Project Description The project will investigate the wear mechanisms of surface treatments for alloys 800H and 617 will be investigated to: (i) mitigate tribological damage in High Temperature Gas Reactor (HTGR) environments, (ii) minimize sensitivity of corrosion to various impurity regimes and provide greater predictability in wear behavior, (iii)

  20. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SECTION A. Project Title: Effect of Gamma Irradiation on the Microstructure and Mechanical Properties of Nano-modified Concrete - Vanderbilt University SECTION B. Project Description Vanderbilt University, in collaboration with Oak Ridge National Laboratory, proposes to perform gamma irradiation of nano-modified concrete and appropriate control reference samples that are also relevant to current and historic concrete mixes. The research plan will consist of multiscale chemical and mechanical

  1. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SECTION A. Project Title: Enhancing Irradiation Tolerance of Steels Via Nanostructuring by Innovative Manufacturing Techniques - Idaho State University SECTION B. Project Description Idaho State University, in collaboration with Idaho National Laboratory, proposes to enhance the fundamental understanding of irradiation effects in ultrafine-grained or nanocrystalline steels produced by equal-channel angular pressing (ECAP) or high-pressure torsion (HPT), and to assess the potential application

  2. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 SECTION A. Project Title: A Science Based Approach for Selecting Dopants in FCCI-Resistant Metallic Fuel Systems SECTION B. Project Description The goal of this project is to identify minor alloying additions (dopants) for minimizing or eliminating the effect of fuel cladding chemical interactions (FCCI) in fast reactor metallic fuels. The proposed program combines the following research tasks: i) Selection of dopant elements based on using electronic structure calculated thermokinetic and

  3. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 SECTION A. Project Title: Versatile D-T Neutron-Generation System for Fast-Neutron Research and Education - Pennsylvania State University SECTION B. Project Description Pennsylvania State University proposes to acquire an Adelphi dual-tube 14-MeV Deuterium-Tritium (D-T) neutron-generation system. One tube has a neutron output of 10 8 n/sec, and the other tube has a neutron output of 10 10 n/sec. the lower-neutron-output part of the system will provide a capability to accurately detect the

  4. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 SECTION A. Project Title: Self-powered Wireless Through-wall Data Communication for Nuclear Environments SECTION B. Project Description The proposed action consists of developing and demonstrating an enabling technology for the data communications for nuclear reactors and fuel cycle facilities using radiation and thermal energy harvesters, through-wall ultrasound communication, and harsh environment electronics. Specifically, the consist of three actions: (1) Directly harvest electrical energy

  5. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 SECTION A. Project Title: Understanding fundamental science governing the development and performance of nuclear waste glasses SECTION B. Project Description This proposal aims to combine the strengths of experimental and computational materials science to address four difficult technical challenges related to development and performance of glass based radioactive waste forms. The project consists of four tasks: 1. Understanding the fundamental science governing the nucleation and growth of

  6. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SECTION A. Project Title: Cask Mis-Loads Evaluation Techniques SECTION B. Project Description The main objective of this project is to develop a probabilistically-informed methodology, which involves innovative non- destructive evaluation (NDE) techniques, to determine the extent of potential damage or degradation of internal components of used nuclear fuel canisters/casks during normal conditions of transport or Hypothetical accident conditions. The University of Houston will use NDE based on

  7. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 SECTION A. Project Title: Research and teaching equipment for nuclear materials characterization SECTION B. Project Description The proposal to upgrade the UC Berkeley teaching and research laboratory's to enhance the understanding of mechanical and physical properties of nuclear materials on all length scales. Purchasing state-of-the-art equipment dedicate to be used on active materials allows to investigate reactor and ion beam irradiated materials to enhance accelerated materials testing

  8. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 SECTION A. Project Title: High Temperature Tribological Performance of Ni Alloys Under Helium Environment for Very High Temperature Gas Cooled Reactors (VHTRs) [RC-2.3] Helium Tribology for HTGRs - Texas A&M University SECTION B. Project Description Texas A&M University proposes to systematically evaluate the tribological response of 800H and 617 alloys at relevant reactor operating temperatures (700 o -950 o C) and in the presence of helium coolant. To achieve this objective, the

  9. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SECTION A. Project Title: Experimental and Computational Studies of NEAMS Pebble Bed Reactors - Texas A&M University SECTION B. Project Description Texas A&M University proposes to perform a coordinated experimental and computational effort to quantitatively map the full-field 3-D velocity and temperature fields in the interstitial spaces within a pebble bed. The project will measure in-situ velocity and temperature distributions within a pebble bed flow system using state-of-the-art

  10. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 SECTION A. Project Title: Mobile Manipulation and Survey System for H-Canyon and Other Applications Across the DOE Complex - University of Texas SECTION B. Project Description The University of Texas, in collaboration with the University of Florida, Florida International University, AREVA, and Savannah River National Laboratory, proposes to develop a hybrid mobile platform capable of maneuvering using wheels, treads or articulated legs to perform inspections and collect data in the H-Canyon

  11. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: Upgrade of the MIT Research Reactor's Post Irradiation Examination (PIE) Capabilities - Massachusetts Institute of Technology SECTION B. Project Description The Massachusetts Institute of Technology proposes to purchase and install sample sectioning and polishing equipment and optical and electon microscopes to improve the MIT Research Reactor post-irradiation examination facilities. This will provide for preparation and initial characterization of activated materials

  12. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SECTION A. Project Title: Understand the Phase Transformation of Thermally Aged and Neutron Irradiated Duplex Stainless Steels Used in LWRs - University of Florida SECTION B. Project Description The University of Florida, in collaboration with Argonne National Laboratory (ANL), proposes to use the capability of the high energy X-ray MRCAT facility at ANL, including X-ray diffraction (XRD), Extended X-ray Absorption Fine Structure Specroscopy (EXAFS) and in-situ tensile testing with wide angle

  13. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 SECTION A. Project Title: Two-Phase Flow Facility for Dynamic Characterization of Thermal Hydraulics in Light Water Reactors - Texas A&M University SECTION B. Project Description Texas A&M University proposes to construct an experimental facility that will enable single and two-phase flow experimental data to be acquired in a 3x3 fuel rod array under a wide range of steady-state and transient conditions. The neutronic behavior of a light water reactor will be simulated in real-time and

  14. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 SECTION A. Project Title: Mechanistic Understanding of Silver Sorbent Aging Processes in Off-Gas Treatment - Syracuse University SECTION B. Project Description Syracuse University proposes to develop an understanding of the different mechanisms of silver-aging processes on adsorbents exposed to off-gas streams to enable prediction of long-term operation of gas treatment systems. Experiments to be conducted on silver-exchanged mordenite (Ag0Z) and silver-functionalized silica aerogel

  15. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 SECTION A. Project Title: Alloying Agents to Stabilize Lanthanides Against Fuel Cladding Chemical Interaction: Tellurium and Antimony Studies - Ohio State University SECTION B. Project Description Ohio State University proposes to develop new minor additives which can form high-temperature stabilizing compounds with lanthanide fission products during operation. The proposed additives are expected to have the capability of immobilizing lanthanide fission products and preventing their transport

  16. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 SECTION A. Project Title: Tribal DOE Program/Agreement-In-Principle - Shoshone-Bannock Tribes SECTION B. Project Description The Tribal DOE Program will continue to operate under the Cooperative Agreement No. DE-NE000587, which was negotiated between the Fort Hall Business Council and the Department of Energy-Idaho Office on December 18, 2012 for a 5-year period under the Agreement-In-Principle (AIP). The Tribal DOE AIP Program mission for FY2016 involves oversight and monitoring of DOE

  17. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-001 SECTION A. Project Title: INL - Idaho Completion Project Environmental and Regulatory Services Activities SECTION B. Project Description The proposed action addresses the site-wide sampling and monitoring and waste characterization sampling programs that support the Idaho Completion Project (ICP) operations. Actions include:  groundwater monitoring,  day-to-day monitoring activities (i.e., measurement of liquid or gaseous effluents for purposes of characterizing and quantifying

  18. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6-007 SECTION A. Project Title: INTEC - INTEC - Transfer ATR Fuel From Wet (CPP-666) to Dry (CPP-603) Irradiated Fuel Storage Facility Fuel Conditioning Station SECTION B. Project Description The purpose of this project is to transfer approximately 1,000 ATR fuel elements from wet fuel storage located at the CPP-666 Fuel Storage Area (FSA) at the Idaho Nuclear Technology and Engineering Center (INTEC) to the dry fuel storage located within CPP-603B, Irradiated Fuels Storage Facility (IFSF). The

  19. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EC Document No.: DOE-ID-INL-09-002 SECTION A. Project Title: Smoking Shelters SECTION B. Project Description. Install up to three prefabricated outdoor shelters for smokers. Design and install a shelter base so that shelters can be movable. The base shall be designed to prevent shelters from moving or tipping over due to high winds. Specific location for shelters is to be determined, but the shelter bases will be placed atop existing concrete or asphalt such that no subsurface soil disturbance

  20. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    09-003 SECTION A. Project Title: Removal of Central Facilities Area (CFA)-661 Interior Walls and Mezzanine. SECTION B. Project Description The initial action to be covered under this Environmental Checklist will be removal of the mezzanines from CFA-661 to provide for material storage and work space for the National and Homeland Security (N&HS) Wireless Test Bed project. More specifically, this involves storage of electronic equipment, antennas and antenna masts, personnel supplies, and a

  1. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 __________________________ 1 DOE's strategic plans included the Nuclear Energy Research and Development Roadmap" (2010 Predecisional draft) and reports such as "Facilities for the Future of Nuclear Energy Research: A Twenty-year Outlook". SECTION A. Project Title: Materials and Fuel Complex (MFC) Infrastructure Upgrades: Sewage Lagoons Upgrades SECTION B. Project Description: MFC Infrastructure Upgrades - MFC Sewage Lagoon Upgrades This EC focuses on upgrades to the existing 2.4

  2. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 SECTION A. Project Title: Materials and Fuels Complex (MFC) Infrastructure Upgrades - Technical Support Building SECTION B. Project Description: Materials and Fuels Complex (MFC) Infrastructure Upgrades - General The number of researchers and operators at the Materials and Fuels Complex has significantly increased, and is projected to increase further in the future to support the expanding research activities at the facility. These activities will require infrastructure upgrades (office space,

  3. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 SECTION A. Project Title: Materials and Fuel Complex (MFC) Infrastructure Upgrades: Modular Office Units SECTION B. Project Description: MFC Infrastructure Upgrades - General The number of researchers and operators at MFC has significantly increased, and is projected to increase further in the future to support the expanding research activities at the facility. These activities will require Infrastructure upgrades (office space, potable water, wastewater treatment, communications, etc.) to

  4. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-017 SECTION A. Project Title: Test Reactor Area (TRA)-653 Conference Room Modifications SECTION B. Project Description: The Advanced Test Reactor (ATR) Maintenance Shop, building Test Reactor Area (TRA)-653, located at the ATR Complex, has an upstairs conference room capable of being used as one large conference room or can be split into two conference rooms by a sliding curtain divider. The current configuration causes meeting interruptions due to the one available door limiting personnel

  5. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE-ID-ICP-16-001 R1 SECTION A. Project Title: INTEC - Macroencapsulation/Overpack Operations in CPP-659 and CPP-1617, Rev. 1 SECTION B. Project Description The proposed action will treat mixed low-level waste (MLLW) at the Idaho Nuclear Technology and Engineering Center (INTEC). The treatment process, macroencapsulation, will result in the waste stream meeting the treatment standards for debris and radioactive lead solids (RLS) for disposition at the Nevada National Security Site (NNSS). The

  6. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 SECTION A. Project Title: INTEC - Upgrade of the Emergency Communication System SECTION B. Project Description The proposed action will design, procure, and install an upgrade to the emergency communication system (ECS) for the Idaho Nuclear Technology and Engineering Center (INTEC). The existing system does not meet the new Life Safety codes and parts are no longer available for the antiquated system. Approximately 39 buildings will be included in the system modification and upgrade of ECS

  7. DATE:

    Office of Environmental Management (EM)

    Portaledge, March 2010 | Department of Energy Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010 Cyber Security Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010 This project of the cyber security audit and attack detection toolkit will employ Bandolier Audit Files for optimizing security configurations and the Portaledge event detection capability for energy control systems. By building configuration audit and attack detection capabilities into

  8. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    testing, high efficiency particulate air filter testing and certification, stress tests (such as "burn-in" testing of electrical components and leak testing), and...

  9. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    action will abandon inactive wells and injection wells at the Idaho National Laboratory (INL) Site. Wells and injection wells will be abandoned as per MCP-1442, MCP-3480 and ...

  10. DATE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Welding is done in another portion of the building (weld shop, insignificant activity) served by a different ventilation system. Certified Refrigeration Technicians will use ...