National Library of Energy BETA

Sample records for model pc version

  1. ISTUM PC: industrial sector technology use model for the IBM-PC

    SciTech Connect (OSTI)

    Roop, J.M.; Kaplan, D.T.

    1984-09-01

    A project to improve and enhance the Industrial Sector Technology Use Model (ISTUM) was originated in the summer of 1983. The project had dix identifiable objectives: update the data base; improve run-time efficiency; revise the reference base case; conduct case studies; provide technical and promotional seminars; and organize a service bureau. This interim report describes which of these objectives have been met and which tasks remain to be completed. The most dramatic achievement has been in the area of run-time efficiency. From a model that required a large proportion of the total resources of a mainframe computer and a great deal of effort to operate, the current version of the model (ISTUM-PC) runs on an IBM Personal Computer. The reorganization required for the model to run on a PC has additional advantages: the modular programs are somewhat easier to understand and the data base is more accessible and easier to use. A simple description of the logic of the model is given in this report. To generate the necessary funds for completion of the model, a multiclient project is proposed. This project will extend the industry coverage to all the industrial sectors, including the construction of process flow models for chemicals and petroleum refining. The project will also calibrate this model to historical data and construct a base case and alternative scenarios. The model will be delivered to clients and training provided. 2 references, 4 figures, 3 tables.

  2. Glass Furnace Model Version 2

    Energy Science and Technology Software Center (OSTI)

    2003-05-06

    GFM2.0 is a derivative of the GFM code with substantially altered and enhanced capabilities. Like its predecessor, it is a fully three-dimensional, furnace simulation model that provides a more accurate representation of the entire furnace, and specifically, the glass melting process, by coupling the combustion space directly to the glass batch and glass melt via rigorous radiation heat transport models for both the combustion space and the glass melt. No assumptions are made with regardmore » to interfacial parameters of heat, flux, temperature distribution, and batch coverage as must be done using other applicable codes available. These critical parameters are calculated. GFM2.0 contains a processor structured to facilitate use of the code, including the entry of teh furnace geometry and operating conditions, the execution of the program, and display of the computational results. Furnace simulations can therefore be created in a straightforward manner.« less

  3. Model Analysis ToolKit (MATK), Version 0

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Version 0 MATK provides basic functionality to facilitate model analysis within the Python computational environment. June 19, 2015 software MATK provides basic functionality to...

  4. Comparison of U.S. Environmental Protection Agency’s CAP88 PC versions 3.0 and 4.0

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jannik, Tim; Farfan, Eduardo B.; Dixon, Ken; Newton, Joseph; Sailors, Christopher; Johnson, Levi; Moore, Kelsey; Stahman, Richard

    2015-08-01

    The Savannah River National Laboratory (SRNL) with the assistance of Georgia Regents University, completed a comparison of the U.S. Environmental Protection Agency's (EPA) environmental dosimetry code CAP88 PC V3.0 with the recently developed V4.0. CAP88 is a set of computer programs and databases used for estimation of dose and risk from radionuclide emissions to air. At the U.S. Department of Energy's Savannah River Site, CAP88 is used by SRNL for determining compliance with EPA's National Emission Standards for Hazardous Air Pollutants (40 CFR 61, Subpart H) regulations. Using standardized input parameters, individual runs were conducted for each radionuclide within itsmore » corresponding database. Some radioactive decay constants, human usage parameters, and dose coefficients changed between the two versions, directly causing a proportional change in the total effective 137Cs, 3H, 129I, 239Pu, and 90Sr) is provided. In general, the total effective doses will decrease for alpha/beta emitters because of reduced inhalation and ingestion rates in V4.0. However, for gamma emitters, such as 60Co and 137Cs, the total effective doses will increase because of changes EPA made in the external ground shine calculations.« less

  5. Comparison of U.S. Environmental Protection Agency’s CAP88 PC versions 3.0 and 4.0

    SciTech Connect (OSTI)

    Jannik, Tim; Farfan, Eduardo B.; Dixon, Ken; Newton, Joseph; Sailors, Christopher; Johnson, Levi; Moore, Kelsey; Stahman, Richard

    2015-08-01

    The Savannah River National Laboratory (SRNL) with the assistance of Georgia Regents University, completed a comparison of the U.S. Environmental Protection Agency's (EPA) environmental dosimetry code CAP88 PC V3.0 with the recently developed V4.0. CAP88 is a set of computer programs and databases used for estimation of dose and risk from radionuclide emissions to air. At the U.S. Department of Energy's Savannah River Site, CAP88 is used by SRNL for determining compliance with EPA's National Emission Standards for Hazardous Air Pollutants (40 CFR 61, Subpart H) regulations. Using standardized input parameters, individual runs were conducted for each radionuclide within its corresponding database. Some radioactive decay constants, human usage parameters, and dose coefficients changed between the two versions, directly causing a proportional change in the total effective 137Cs, 3H, 129I, 239Pu, and 90Sr) is provided. In general, the total effective doses will decrease for alpha/beta emitters because of reduced inhalation and ingestion rates in V4.0. However, for gamma emitters, such as 60Co and 137Cs, the total effective doses will increase because of changes EPA made in the external ground shine calculations.

  6. The integrated Earth System Model Version 1: formulation and functionality

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect The integrated Earth System Model Version 1: formulation and functionality Citation Details In-Document Search Title: The integrated Earth System Model Version 1: formulation and functionality The integrated Earth System Model (iESM) has been developed as a new tool for pro- jecting the joint human/climate system. The iESM is based upon coupling an Integrated Assessment Model (IAM) and an Earth System Model (ESM) into a common modeling in- frastructure.

  7. Solar Advisor Model User Guide for Version 2.0

    SciTech Connect (OSTI)

    Gilman, P.; Blair, N.; Mehos, M.; Christensen, C.; Janzou, S.; Cameron, C.

    2008-08-01

    The Solar Advisor Model (SAM) provides a consistent framework for analyzing and comparing power system costs and performance across the range of solar technologies and markets, from photovoltaic systems for residential and commercial markets to concentrating solar power and large photovoltaic systems for utility markets. This manual describes Version 2.0 of the software, which can model photovoltaic and concentrating solar power technologies for electric applications for several markets. The current version of the Solar Advisor Model does not model solar heating and lighting technologies.

  8. A regular version of Smilansky model

    SciTech Connect (OSTI)

    Barseghyan, Diana; Exner, Pavel; Nuclear Physics Institute ASCR, 25068 ?e near Prague

    2014-04-15

    We discuss a modification of Smilansky model in which a singular potential channel is replaced by a regular, below unbounded potential which shrinks as it becomes deeper. We demonstrate that, similarly to the original model, such a system exhibits a spectral transition with respect to the coupling constant, and determine the critical value above which a new spectral branch opens. The result is generalized to situations with multiple potential channels..

  9. Smart Grid Interoperability Maturity Model Beta Version

    SciTech Connect (OSTI)

    Widergren, Steven E.; Drummond, R.; Giroti, Tony; Houseman, Doug; Knight, Mark; Levinson, Alex; longcore, Wayne; Lowe, Randy; Mater, J.; Oliver, Terry V.; Slack, Phil; Tolk, Andreas; Montgomery, Austin

    2011-12-02

    The GridWise Architecture Council was formed by the U.S. Department of Energy to promote and enable interoperability among the many entities that interact with the electric power system. This balanced team of industry representatives proposes principles for the development of interoperability concepts and standards. The Council provides industry guidance and tools that make it an available resource for smart grid implementations. In the spirit of advancing interoperability of an ecosystem of smart grid devices and systems, this document presents a model for evaluating the maturity of the artifacts and processes that specify the agreement of parties to collaborate across an information exchange interface. You are expected to have a solid understanding of large, complex system integration concepts and experience in dealing with software component interoperation. Those without this technical background should read the Executive Summary for a description of the purpose and contents of the document. Other documents, such as checklists, guides, and whitepapers, exist for targeted purposes and audiences. Please see the www.gridwiseac.org website for more products of the Council that may be of interest to you.

  10. IDC Use Case Model Survey Version 1.0.

    SciTech Connect (OSTI)

    Carr, Dorthe B.; Harris, James M.

    2014-12-01

    This document contains the brief descriptions for the actors and use cases contained in the IDC Use Case Model Survey. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Re- engineering Project Team Initial delivery M. Harris

  11. IDC Use Case Model Survey Version 1.1.

    SciTech Connect (OSTI)

    Harris, James Mark; Carr, Dorthe B.

    2015-02-01

    This document contains the brief descriptions for the actors and use cases contained in the IDC Use Case Model. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 SNL IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 SNL IDC Reengineering Project Team Iteration I2 Review Comments M. Harris

  12. Climate Sensitivity of the Community Climate System Model, Version 4

    SciTech Connect (OSTI)

    Bitz, Cecilia M.; Shell, K. M.; Gent, P. R.; Bailey, D. A.; Danabasoglu, G.; Armour, K. C.; Holland, M. M.; Kiehl, J. T.

    2012-05-01

    Equilibrium climate sensitivity of the Community Climate System Model Version 4 (CCSM4) is 3.20°C for 1° horizontal resolution in each component. This is about a half degree Celsius higher than in the previous version (CCSM3). The transient climate sensitivity of CCSM4 at 1° resolution is 1.72°C, which is about 0.2°C higher than in CCSM3. These higher climate sensitivities in CCSM4 cannot be explained by the change to a preindustrial baseline climate. We use the radiative kernel technique to show that from CCSM3 to CCSM4, the global mean lapse-rate feedback declines in magnitude, and the shortwave cloud feedback increases. These two warming effects are partially canceled by cooling due to slight decreases in the global mean water-vapor feedback and longwave cloud feedback from CCSM3 to CCSM4. A new formulation of the mixed-layer, slab ocean model in CCSM4 attempts to reproduce the SST and sea ice climatology from an integration with a full-depth ocean, and it is integrated with a dynamic sea ice model. These new features allow an isolation of the influence of ocean dynamical changes on the climate response when comparing integrations with the slab ocean and full-depth ocean. The transient climate response of the full-depth ocean version is 0.54 of the equilibrium climate sensitivity when estimated with the new slab ocean model version for both CCSM3 and CCSM4. We argue the ratio is the same in both versions because they have about the same zonal mean pattern of change in ocean surface heat flux, which broadly resembles the zonal mean pattern of net feedback strength.

  13. Climate Sensitivity of the Community Climate System Model, Version 4

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bitz, Cecilia M.; Shell, K. M.; Gent, P. R.; Bailey, D. A.; Danabasoglu, G.; Armour, K. C.; Holland, M. M.; Kiehl, J. T.

    2012-05-01

    Equilibrium climate sensitivity of the Community Climate System Model Version 4 (CCSM4) is 3.20°C for 1° horizontal resolution in each component. This is about a half degree Celsius higher than in the previous version (CCSM3). The transient climate sensitivity of CCSM4 at 1° resolution is 1.72°C, which is about 0.2°C higher than in CCSM3. These higher climate sensitivities in CCSM4 cannot be explained by the change to a preindustrial baseline climate. We use the radiative kernel technique to show that from CCSM3 to CCSM4, the global mean lapse-rate feedback declines in magnitude, and the shortwave cloud feedback increases. These twomore » warming effects are partially canceled by cooling due to slight decreases in the global mean water-vapor feedback and longwave cloud feedback from CCSM3 to CCSM4. A new formulation of the mixed-layer, slab ocean model in CCSM4 attempts to reproduce the SST and sea ice climatology from an integration with a full-depth ocean, and it is integrated with a dynamic sea ice model. These new features allow an isolation of the influence of ocean dynamical changes on the climate response when comparing integrations with the slab ocean and full-depth ocean. The transient climate response of the full-depth ocean version is 0.54 of the equilibrium climate sensitivity when estimated with the new slab ocean model version for both CCSM3 and CCSM4. We argue the ratio is the same in both versions because they have about the same zonal mean pattern of change in ocean surface heat flux, which broadly resembles the zonal mean pattern of net feedback strength.« less

  14. Models and Results Database (MAR-D), Version 4. 0

    SciTech Connect (OSTI)

    Branham-Haar, K.A.; Dinneen, R.A.; Russell, K.D.; Skinner, N.L. )

    1992-05-01

    The Nuclear Regulatory Commission's Office of Nuclear Regulatory Research (NRC-RES) is presently funding the development of the Models and Results Database (MAR-D) at the Idaho National Engineering Laboratory. MAR-D's primary function is to create a data repository for NUREG-1150 and other permanent data by providing input, conversion, and output capabilities for data used by IRRAS, SARA, SETS, and FRANTIC personal computer (PC) codes. As probabilistic risk assessments and individual plant examinations are submitted to the NRC for review, MAR-D can be used to convert the models and results from the study for use with IRRAS and SARA. Then, these data can be easily accessed by future studies and will be in a form that will enhance the analysis process. This reference manual provides an overview of the function available within MAR-D and step-by-step operating instructions.

  15. H2A Production Model, Version 2 User Guide

    SciTech Connect (OSTI)

    Steward, D.; Ramsden, T.; Zuboy, J.

    2008-09-01

    The H2A Production Model analyzes the technical and economic aspects of central and forecourt hydrogen production technologies. Using a standard discounted cash flow rate of return methodology, it determines the minimum hydrogen selling price, including a specified after-tax internal rate of return from the production technology. Users have the option of accepting default technology input values--such as capital costs, operating costs, and capacity factor--from established H2A production technology cases or entering custom values. Users can also modify the model's financial inputs. This new version of the H2A Production Model features enhanced usability and functionality. Input fields are consolidated and simplified. New capabilities include performing sensitivity analyses and scaling analyses to various plant sizes. This User Guide helps users already familiar with the basic tenets of H2A hydrogen production cost analysis get started using the new version of the model. It introduces the basic elements of the model then describes the function and use of each of its worksheets.

  16. Text-Alternative Version: Model Specification for LED Roadway Luminaires Webcast

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Model Specification for LED Roadway Luminaires" webcast, held November 15, 2011.

  17. The integrated Earth System Model Version 1: formulation and functionality

    SciTech Connect (OSTI)

    Collins, William D.; Craig, Anthony P.; Truesdale, John E.; Di Vittorio, Alan; Jones, Andrew D.; Bond-Lamberty, Benjamin; Calvin, Katherine V.; Edmonds, James A.; Kim, Son H.; Thomson, Allison M.; Patel, Pralit L.; Zhou, Yuyu; Mao, Jiafu; Shi, Xiaoying; Thornton, Peter E.; Chini, Louise M.; Hurtt, George C.

    2015-07-23

    The integrated Earth System Model (iESM) has been developed as a new tool for pro- jecting the joint human/climate system. The iESM is based upon coupling an Integrated Assessment Model (IAM) and an Earth System Model (ESM) into a common modeling in- frastructure. IAMs are the primary tool for describing the human–Earth system, including the sources of global greenhouse gases (GHGs) and short-lived species, land use and land cover change, and other resource-related drivers of anthropogenic climate change. ESMs are the primary scientific tools for examining the physical, chemical, and biogeochemical impacts of human-induced changes to the climate system. The iESM project integrates the economic and human dimension modeling of an IAM and a fully coupled ESM within a sin- gle simulation system while maintaining the separability of each model if needed. Both IAM and ESM codes are developed and used by large communities and have been extensively applied in recent national and international climate assessments. By introducing heretofore- omitted feedbacks between natural and societal drivers, we can improve scientific under- standing of the human–Earth system dynamics. Potential applications include studies of the interactions and feedbacks leading to the timing, scale, and geographic distribution of emissions trajectories and other human influences, corresponding climate effects, and the subsequent impacts of a changing climate on human and natural systems. This paper de- scribes the formulation, requirements, implementation, testing, and resulting functionality of the first version of the iESM released to the global climate community.

  18. The integrated Earth system model version 1: formulation and functionality

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Collins, W. D.; Craig, A. P.; Truesdale, J. E.; Di Vittorio, A. V.; Jones, A. D.; Bond-Lamberty, B.; Calvin, K. V.; Edmonds, J. A.; Kim, S. H.; Thomson, A. M.; et al

    2015-07-23

    The integrated Earth system model (iESM) has been developed as a new tool for projecting the joint human/climate system. The iESM is based upon coupling an integrated assessment model (IAM) and an Earth system model (ESM) into a common modeling infrastructure. IAMs are the primary tool for describing the human–Earth system, including the sources of global greenhouse gases (GHGs) and short-lived species (SLS), land use and land cover change (LULCC), and other resource-related drivers of anthropogenic climate change. ESMs are the primary scientific tools for examining the physical, chemical, and biogeochemical impacts of human-induced changes to the climate system. Themore » iESM project integrates the economic and human-dimension modeling of an IAM and a fully coupled ESM within a single simulation system while maintaining the separability of each model if needed. Both IAM and ESM codes are developed and used by large communities and have been extensively applied in recent national and international climate assessments. By introducing heretofore-omitted feedbacks between natural and societal drivers, we can improve scientific understanding of the human–Earth system dynamics. Potential applications include studies of the interactions and feedbacks leading to the timing, scale, and geographic distribution of emissions trajectories and other human influences, corresponding climate effects, and the subsequent impacts of a changing climate on human and natural systems. This paper describes the formulation, requirements, implementation, testing, and resulting functionality of the first version of the iESM released to the global climate community.« less

  19. Vadose Zone Contaminant Migration Multi-Layer Model Software (Version 4.0)

    Energy Science and Technology Software Center (OSTI)

    2009-08-12

    The Version 4.0 model is designed to improve functionality and addresses a greater range of unsaturated zone scenarios than previous versions. The additional flexibility is accomplished in the model by including user-defined hydraulic layer functions and hydraulic parameters.

  20. Integrated Air Pollution Control System (IAPCS), Executable Model (Version 4. 0) (for microcomputers). Model-Simulation

    SciTech Connect (OSTI)

    Not Available

    1990-10-29

    The Integrated Air Pollution Control System (IAPCS) Cost Model is an IBM PC cost model that can be used to estimate the cost of installing SO2, NOx, and particulate matter control systems at coal-fired utility electric generating facilities. The model integrates various combinations of the following technologies: physical coal cleaning, coal switching, overfire air/low NOx burners, natural gas reburning, LIMB, ADVACATE, electrostatic precipitator, fabric filter, gas conditioning, wet lime or limestone FGD, lime spray drying/duct spray drying, dry sorbent injection, pressurized fluidized bed combustion, integrated gasification combined cycle, and pulverized coal burning boiler. The model generates capital, annualized, and unitized pollutant removal costs in either constant or current dollars for any year.

  1. Estimating Parameters for the PVsyst Version 6 Photovoltaic Module Performance Model

    SciTech Connect (OSTI)

    Hansen, Clifford

    2015-10-01

    We present an algorithm to determine parameters for the photovoltaic module perf ormance model encoded in the software package PVsyst(TM) version 6. Our method operates on current - voltage (I - V) measured over a range of irradiance and temperature conditions. We describe the method and illustrate its steps using data for a 36 cell crystalli ne silicon module. We qualitatively compare our method with one other technique for estimating parameters for the PVsyst(TM) version 6 model .

  2. The integrated Earth System Model Version 1: formulation and...

    Office of Scientific and Technical Information (OSTI)

    The iESM is based upon coupling an Integrated Assessment Model (IAM) and an Earth System ... The iESM project integrates the economic and human dimension modeling of an IAM and a ...

  3. Integrated Baseline System (IBS) Version 2.0: Models guide

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    The Integrated Baseline System (IBS) is an emergency management planning and analysis tool being developed under the direction of the US Army Nuclear and Chemical Agency. This Models Guide summarizes the IBS use of several computer models for predicting the results of emergency situations. These include models for predicting dispersion/doses of airborne contaminants, traffic evacuation, explosion effects, heat radiation from a fire, and siren sound transmission. The guide references additional technical documentation on the models when such documentation is available from other sources. The audience for this manual is chiefly emergency management planners and analysts, but also data managers and system managers.

  4. Integrated Baseline Bystem (IBS) Version 1.03: Models guide

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Integrated Baseline System)(IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planning and analysis. This document is the models guide for the IBS and explains how to use the emergency related computer models. This document provides information for the experienced system user, and is the primary reference for the computer modeling software supplied with the system. It is designed for emergency managers and planners, and others familiar with the concepts of computer modeling. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other IBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary.

  5. Macro System Model (MSM) User Guide, Version 1.3

    SciTech Connect (OSTI)

    Ruth, M.; Diakov, V.; Sa, T.; Goldsby, M.

    2011-09-01

    This user guide describes the macro system model (MSM). The MSM has been designed to allow users to analyze the financial, environmental, transitional, geographical, and R&D issues associated with the transition to a hydrogen economy. Basic end users can use the MSM to answer cross-cutting questions that were previously difficult to answer in a consistent and timely manner due to various assumptions and methodologies among different models.

  6. Red Storm usage model :Version 1.12.

    SciTech Connect (OSTI)

    Jefferson, Karen L.; Sturtevant, Judith E.

    2005-12-01

    Red Storm is an Advanced Simulation and Computing (ASC) funded massively parallel supercomputer located at Sandia National Laboratories (SNL). The Red Storm Usage Model (RSUM) documents the capabilities and the environment provided for the FY05 Tri-Lab Level II Limited Availability Red Storm User Environment Milestone and the FY05 SNL Level II Limited Availability Red Storm Platform Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model is focused on the needs of the ASC user working in the secure computing environments at Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and SNL. Additionally, the Red Storm Usage Model maps the provided capabilities to the Tri-Lab ASC Computing Environment (ACE) requirements. The ACE requirements reflect the high performance computing requirements for the ASC community and have been updated in FY05 to reflect the community's needs. For each section of the RSUM, Appendix I maps the ACE requirements to the Limited Availability User Environment capabilities and includes a description of ACE requirements met and those requirements that are not met in that particular section. The Red Storm Usage Model, along with the ACE mappings, has been issued and vetted throughout the Tri-Lab community.

  7. Integrated Air Pollution Control System (IAPCS), Executable Model and Source Model (version 4. 0) (for microcomputers). Model-Simulation

    SciTech Connect (OSTI)

    Not Available

    1990-10-29

    The Integrated Air Pollution Control System (IAPCS) Cost Model is an IBM PC cost model that can be used to estimate the cost of installing SO2, NOx, and particulate matter control systems at coal-fired utility electric generating facilities. The model integrates various combinations of the following technologies: physical coal cleaning, coal switching, overfire air/low NOx burners, natural gas reburning, LIMB, ADVACATE, electrostatic precipitator, fabric filter, gas conditioning, wet lime or limestone FGD, lime spray drying/duct spray drying, dry sorbent injection, pressurized fluidized bed combustion, integrated gasification combined cycle, and pulverized coal burning boiler. The model generates capital, annualized, and unitized pollutant removal costs in either constant or current dollars for any year.

  8. Analyzing the Levelized Cost of Centralized and Distributed Hydrogen Production Using the H2A Production Model, Version 2

    SciTech Connect (OSTI)

    Ramsden, T.; Steward, D.; Zuboy, J.

    2009-09-01

    Analysis of the levelized cost of producing hydrogen via different pathways using the National Renewable Energy Laboratory's H2A Hydrogen Production Model, Version 2.

  9. Building Restoration Operations Optimization Model Beta Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2007-05-31

    The Building Restoration Operations Optimization Model (BROOM), developed by Sandia National Laboratories, is a software product designed to aid in the restoration of large facilities contaminated by a biological material. BROOM’s integrated data collection, data management, and visualization software improves the efficiency of cleanup operations, minimizes facility downtime, and provides a transparent basis for reopening the facility. Secure remote access to building floor plans Floor plan drawings and knowledge of the HVAC system are criticalmore » to the design and implementation of effective sampling plans. In large facilities, access to these data may be complicated by the sheer abundance and disorganized state they are often stored in. BROOM avoids potentially costly delays by providing a means of organizing and storing mechanical and floor plan drawings in a secure remote database that is easily accessed. Sampling design tools BROOM provides an array of tools to answer the question of where to sample and how many samples to take. In addition to simple judgmental and random sampling plans, the software includes two sophisticated methods of adaptively developing a sampling strategy. Both tools strive to choose sampling locations that best satisfy a specified objective (i.e. minimizing kriging variance) but use numerically different strategies to do so. Surface samples are collected early in the restoration process to characterize the extent of contamination and then again later to verify that the facility is safe to reenter. BROOM supports sample collection using a ruggedized PDA equipped with a barcode scanner and laser range finder. The PDA displays building floor drawings, sampling plans, and electronic forms for data entry. Barcodes are placed on sample containers for the purpose of tracking the specimen and linking acquisition data (i.e. location, surface type, texture) to laboratory results. Sample location is determined by activating the integrated laser range finder which uses the PDA drawings to accurately measure position relative to nearby walls or other interior structures. The PDA and desktop application exchange information over a secure wireless network, Through this network, the progress of sampling activities may be monitored in real-time. PDA-acquired data is ultimately transferred over the network to the desktop where it is stored permanently in the project database. Once in the database, the data may be viewed, analyzed, or reported from the desktop. Mapping A picture is worth a thousand words. BROOM includes both inverse distance and kriging interpolation algorithms which are used to generate continuous contamination maps and display underlying confidence. Such maps greatly assist in interpreting discrete sample data and communicating results to others. Data Management The BROOM database provides a streamlined means of storing. retrieving, viewing, and analyzing the various data associated with recovery operations. Critical floor plan drawings and other pertinent images may be organized and stored in the database before an event occurs. History indicates that thousands of samples will need to be collected and analyzed by contractors, laboratories, government agencies. and other stakeholders. The BROOM database provides a secure, easy to use plafform, where these data may be centrally stored and shared among all concerned parties.« less

  10. The Community Climate System Model Version 4 (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect The fourth version of the Community Climate System Model (CCSM4) was recently completed and released to the climate community. This paper describes developments to all the CCSM components, and documents fully coupled pre-industrial control runs compared to the previous version, CCSM3. Using the standard atmosphere and land resolution of 1{sup o} results in the sea surface temperature biases in the major upwelling regions being comparable to the 1.4{sup o} resolution CCSM3. Two

  11. The Lagrangian particle dispersion model FLEXPART-WRF VERSION 3.1

    SciTech Connect (OSTI)

    Brioude, J.; Arnold, D.; Stohl, A.; Cassiani, M.; Morton, Don; Seibert, P.; Angevine, W. M.; Evan, S.; Dingwell, A.; Fast, Jerome D.; Easter, Richard C.; Pisso, I.; Bukhart, J.; Wotawa, G.

    2013-11-01

    The Lagrangian particle dispersion model FLEXPART was originally designed for cal- culating long-range and mesoscale dispersion of air pollutants from point sources, such as after an accident in a nuclear power plant. In the meantime FLEXPART has evolved into a comprehensive tool for atmospheric transport modeling and analysis at different scales. This multiscale need from the modeler community has encouraged new developments in FLEXPART. In this document, we present a version that works with the Weather Research and Forecasting (WRF) mesoscale meteoro- logical model. Simple procedures on how to run FLEXPART-WRF are presented along with special options and features that differ from its predecessor versions. In addition, test case data, the source code and visualization tools are provided to the reader as supplementary material.

  12. Community Land Model Version 3.0 (CLM3.0) Developer's Guide

    SciTech Connect (OSTI)

    Hoffman, FM

    2004-12-21

    This document describes the guidelines adopted for software development of the Community Land Model (CLM) and serves as a reference to the entire code base of the released version of the model. The version of the code described here is Version 3.0 which was released in the summer of 2004. This document, the Community Land Model Version 3.0 (CLM3.0) User's Guide (Vertenstein et al., 2004), the Technical Description of the Community Land Model (CLM) (Oleson et al., 2004), and the Community Land Model's Dynamic Global Vegetation Model (CLM-DGVM): Technical Description and User's Guide (Levis et al., 2004) provide the developer, user, or researcher with details of implementation, instructions for using the model, a scientific description of the model, and a scientific description of the Dynamic Global Vegetation Model integrated with CLM respectively. The CLM is a single column (snow-soil-vegetation) biogeophysical model of the land surface which can be run serially (on a laptop or personal computer) or in parallel (using distributed or shared memory processors or both) on both vector and scalar computer architectures. Written in Fortran 90, CLM can be run offline (i.e., run in isolation using stored atmospheric forcing data), coupled to an atmospheric model (e.g., the Community Atmosphere Model (CAM)), or coupled to a climate system model (e.g., the Community Climate System Model Version 3 (CCSM3)) through a flux coupler (e.g., Coupler 6 (CPL6)). When coupled, CLM exchanges fluxes of energy, water, and momentum with the atmosphere. The horizontal land surface heterogeneity is represented by a nested subgrid hierarchy composed of gridcells, landunits, columns, and plant functional types (PFTs). This hierarchical representation is reflected in the data structures used by the model code. Biophysical processes are simulated for each subgrid unit (landunit, column, and PFT) independently, and prognostic variables are maintained for each subgrid unit. Vertical heterogeneity is represented by a single vegetation layer, 10 layers for soil, and up to five layers for snow, depending on the snow depth. For computational efficiency, gridcells are grouped into ''clumps'' which are divided in cyclic fashion among distributed memory processors. Additional parallel performance is obtained by distributing clumps of gridcells across shared memory processors on computer platforms that support hybrid Message Passing Interface (MPI)/OpenMP operation. Significant modifications to the source code have been made over the last year to support efficient operation on newer vector architectures, specifically the Earth Simulator in Japan and the Cray X1 at Oak Ridge National Laboratory (Homan et al., 2004). These code modifications resulted in performance improvements even on the scalar architectures widely used for running CLM presently. To better support vectorized processing in the code, subgrid units (columns and PFTs) are grouped into ''filters'' based on their process-specific categorization. For example, filters (vectors of integers) referring to all snow, non-snow, lake, non-lake, and soil covered columns and PFTs within each clump are built and maintained when the model is run. Many loops within the scientific subroutines use these filters to indirectly address the process-appropriate subgrid units.

  13. Aerosol specification in single-column Community Atmosphere Model version 5

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lebassi-Habtezion, B.; Caldwell, P. M.

    2015-03-27

    Single-column model (SCM) capability is an important tool for general circulation model development. In this study, the SCM mode of version 5 of the Community Atmosphere Model (CAM5) is shown to handle aerosol initialization and advection improperly, resulting in aerosol, cloud-droplet, and ice crystal concentrations which are typically much lower than observed or simulated by CAM5 in global mode. This deficiency has a major impact on stratiform cloud simulations but has little impact on convective case studies because aerosol is currently not used by CAM5 convective schemes and convective cases are typically longer in duration (so initialization is less important).more » By imposing fixed aerosol or cloud-droplet and crystal number concentrations, the aerosol issues described above can be avoided. Sensitivity studies using these idealizations suggest that the Meyers et al. (1992) ice nucleation scheme prevents mixed-phase cloud from existing by producing too many ice crystals. Microphysics is shown to strongly deplete cloud water in stratiform cases, indicating problems with sequential splitting in CAM5 and the need for careful interpretation of output from sequentially split climate models. Droplet concentration in the general circulation model (GCM) version of CAM5 is also shown to be far too low (~ 25 cm−3) at the southern Great Plains (SGP) Atmospheric Radiation Measurement (ARM) site.« less

  14. PC Basic Linear Algebra Subroutines

    Energy Science and Technology Software Center (OSTI)

    1992-03-09

    PC-BLAS is a highly optimized version of the Basic Linear Algebra Subprograms (BLAS), a standardized set of thirty-eight routines that perform low-level operations on vectors of numbers in single and double-precision real and complex arithmetic. Routines are included to find the index of the largest component of a vector, apply a Givens or modified Givens rotation, multiply a vector by a constant, determine the Euclidean length, perform a dot product, swap and copy vectors, andmore » find the norm of a vector. The BLAS have been carefully written to minimize numerical problems such as loss of precision and underflow and are designed so that the computation is independent of the interface with the calling program. This independence is achieved through judicious use of Assembly language macros. Interfaces are provided for Lahey Fortran 77, Microsoft Fortran 77, and Ryan-McFarland IBM Professional Fortran.« less

  15. EIA model documentation: World oil refining logistics demand model,``WORLD`` reference manual. Version 1.1

    SciTech Connect (OSTI)

    Not Available

    1994-04-11

    This manual is intended primarily for use as a reference by analysts applying the WORLD model to regional studies. It also provides overview information on WORLD features of potential interest to managers and analysts. Broadly, the manual covers WORLD model features in progressively increasing detail. Section 2 provides an overview of the WORLD model, how it has evolved, what its design goals are, what it produces, and where it can be taken with further enhancements. Section 3 reviews model management covering data sources, managing over-optimization, calibration and seasonality, check-points for case construction and common errors. Section 4 describes in detail the WORLD system, including: data and program systems in overview; details of mainframe and PC program control and files;model generation, size management, debugging and error analysis; use with different optimizers; and reporting and results analysis. Section 5 provides a detailed description of every WORLD model data table, covering model controls, case and technology data. Section 6 goes into the details of WORLD matrix structure. It provides an overview, describes how regional definitions are controlled and defines the naming conventions for-all model rows, columns, right-hand sides, and bounds. It also includes a discussion of the formulation of product blending and specifications in WORLD. Several Appendices supplement the main sections.

  16. Distributed Energy Resources Customer Adoption Model (DER-CAM), Investment & Planing Version 3.10.5.m

    SciTech Connect (OSTI)

    2014-04-01

    Version 3.10.5 is a multi-year Decision Support tool for Distributed Generation (DG). DER-CAM was initially created as an exclusively economic energy model, able to find the cost minimizing combination and operation profile of a set of DER technologies that meet heat and electric loads of a single building or microgrid for a typical test year. Now, version 3.10.5.m solves for a multiple-year horizon the technology choice question, the appropriate capacity for each selected technology as well as the operational and investment schedule. Optimized investment decisions are based on techno-economic criteria, along with site information such as energy loads, economic forecast, and technology characterization. Version 3.10.5 contains: 1. a PV and battery degradation model and 2. variable performance for technologies. Efficiency, investment costs, etc. can vary over time and model technology breakthroughs and advancements.

  17. Distributed Energy Resources Customer Adoption Model (DER-CAM), Investment & Planing Version 3.10.5.m

    Energy Science and Technology Software Center (OSTI)

    2014-04-01

    Version 3.10.5 is a multi-year Decision Support tool for Distributed Generation (DG). DER-CAM was initially created as an exclusively economic energy model, able to find the cost minimizing combination and operation profile of a set of DER technologies that meet heat and electric loads of a single building or microgrid for a typical test year. Now, version 3.10.5.m solves for a multiple-year horizon the technology choice question, the appropriate capacity for each selected technology asmore » well as the operational and investment schedule. Optimized investment decisions are based on techno-economic criteria, along with site information such as energy loads, economic forecast, and technology characterization. Version 3.10.5 contains: 1. a PV and battery degradation model and 2. variable performance for technologies. Efficiency, investment costs, etc. can vary over time and model technology breakthroughs and advancements.« less

  18. Distributed Energy Resources Customer Adoption Model (DER-CAM), Investment & Planing Version 3.10.5.m

    Energy Science and Technology Software Center (OSTI)

    2014-04-01

    Version 3.10.5 is a multi-year Decision Support tool for Distributed Generation (DG). DER-CAM was initially created as an exclusively economic energy model, able to find the cost minimizing combination and operation profile of a set of DER technologies that meet heat and electric loads of a single building or microgrid for a typical test year. Now, version 3.10.5.m solves for a multiple-year horizon the technology choice question, the appropriate capacity for each selected technology asmorewell as the operational and investment schedule. Optimized investment decisions are based on techno-economic criteria, along with site information such as energy loads, economic forecast, and technology characterization. Version 3.10.5 contains: 1. a PV and battery degradation model and 2. variable performance for technologies. Efficiency, investment costs, etc. can vary over time and model technology breakthroughs and advancements.less

  19. Accelerator System Model (ASM) user manual with physics and engineering model documentation. ASM version 1.0

    SciTech Connect (OSTI)

    1993-07-01

    The Accelerator System Model (ASM) is a computer program developed to model proton radiofrequency accelerators and to carry out system level trade studies. The ASM FORTRAN subroutines are incorporated into an intuitive graphical user interface which provides for the {open_quotes}construction{close_quotes} of the accelerator in a window on the computer screen. The interface is based on the Shell for Particle Accelerator Related Codes (SPARC) software technology written for the Macintosh operating system in the C programming language. This User Manual describes the operation and use of the ASM application within the SPARC interface. The Appendix provides a detailed description of the physics and engineering models used in ASM. ASM Version 1.0 is joint project of G. H. Gillespie Associates, Inc. and the Accelerator Technology (AT) Division of the Los Alamos National Laboratory. Neither the ASM Version 1.0 software nor this ASM Documentation may be reproduced without the expressed written consent of both the Los Alamos National Laboratory and G. H. Gillespie Associates, Inc.

  20. Energy Integration for 2050 - A Strategic Impact Model (2050 SIM), Version 2.0

    SciTech Connect (OSTI)

    John Collins

    2011-09-01

    The United States (U.S.) energy infrastructure is among the most reliable, accessible, and economic in the world. On the other hand, it is also excessively reliant on foreign energy sources, experiences high volatility in energy prices, does not always practice good stewardship of finite indigenous energy resources, and emits significant quantities of greenhouse gas. The U.S. Department of Energy is conducting research and development on advanced nuclear reactor concepts and technologies, including High Temperature Gas Reactor (HTGR) technologies, directed at helping the United States meet its current and future energy challenges. This report discusses the Draft Strategic Impact Model (SIM), an initial version of which was created during the later part of FY-2010. SIM was developed to analyze and depict the benefits of various energy sources in meeting the energy demand and to provide an overall system understanding of the tradeoffs between building and using HTGRs versus other existing technologies for providing energy (heat and electricity) to various energy-use sectors in the United States. This report also provides the assumptions used in the model, the rationale for the methodology, and the references for the source documentation and source data used in developing the SIM.

  1. Energy Integration for 2050 - A Strategic Impact Model (2050 SIM), Version 1.0

    SciTech Connect (OSTI)

    Not Available

    2010-10-01

    The United States (U.S.) energy infrastructure is among the most reliable, accessible, and economic in the world. On the other hand, it is also excessively reliant on foreign energy sources, experiences high volatility in energy prices, does not always practice good stewardship of finite indigenous energy resources, and emits significant quantities of greenhouse gas. The U.S. Department of Energy is conducting research and development on advanced nuclear reactor concepts and technologies, including High Temperature Gas Reactor (HTGR) technologies, directed at helping the United States meet its current and future energy challenges. This report discusses the Draft Strategic Impact Model (SIM), an initial version of which was created during the later part of FY-2010. SIM was developed to analyze and depict the benefits of various energy sources in meeting the energy demand and to provide an overall system understanding of the tradeoffs between building and using HTGRs versus other existing technologies for providing energy (heat and electricity) to various energy-use sectors in the United States. This report also provides the assumptions used in the model, the rationale for the methodology, and the references for the source documentation and source data used in developing the SIM.

  2. Boreal winter MJO teleconnection in the Community Atmosphere Model version 5 with the Unified Convection parameterization

    SciTech Connect (OSTI)

    Yoo, Changhyun; Park, Sungsu; Kim, Daehyun; Yoon, Jin-Ho; Kim, Hye-Mi

    2015-10-15

    The Madden-Julian Oscillation (MJO), the dominant mode of tropical intraseasonal variability, influences weather and climate in the extratropics through atmospheric teleconnection. In this study, two simulations using the Community Atmosphere Model version 5 (CAM5) - one with the default shallow and deep convection schemes and the other with the Unified Convection scheme (UNICON) - are employed to examine the impacts of cumulus parameterizations on the simulation of the boreal wintertime MJO teleconnection in the Northern Hemisphere. We demonstrate that the UNICON substantially improves the MJO teleconnection. When the UNICON is employed, the simulated circulation anomalies associated with the MJO better resemble the observed counterpart, compared to the simulation with the default convection schemes. Quantitatively, the pattern correlation for the 300-hPa geopotential height anomalies between the simulations and observation increases from 0.07 for the default schemes to 0.54 for the UNICON. These circulation anomalies associated with the MJO further help to enhance the surface air temperature and precipitation anomalies over North America, although room for improvement is still evident. Initial value calculations suggest that the realistic MJO teleconnection with the UNICON is not attributed to the changes in the background wind, but primarily to the improved tropical convective heating associated with the MJO.

  3. Version pressure feedback mechanisms for speculative versioning...

    Office of Scientific and Technical Information (OSTI)

    Version pressure feedback mechanisms for speculative versioning caches Citation Details In-Document Search Title: Version pressure feedback mechanisms for speculative versioning ...

  4. Analyzing the Levelized Cost of Centralized and Distributed Hydrogen Production Using the H2A Production Model, Version 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    267 September 2009 Analyzing the Levelized Cost of Centralized and Distributed Hydrogen Production Using the H2A Production Model, Version 2 T. Ramsden and D. Steward National Renewable Energy Laboratory J. Zuboy Independent Contractor National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Operated by the Alliance for

  5. UNSAT-H Version 3.0: Unsaturated Soil Water and Heat Flow Model Theory, User Manual, and Examples

    SciTech Connect (OSTI)

    MJ Fayer

    2000-06-12

    The UNSAT-H model was developed at Pacific Northwest National Laboratory (PNNL) to assess the water dynamics of arid sites and, in particular, estimate recharge fluxes for scenarios pertinent to waste disposal facilities. During the last 4 years, the UNSAT-H model received support from the Immobilized Waste Program (IWP) of the Hanford Site's River Protection Project. This program is designing and assessing the performance of on-site disposal facilities to receive radioactive wastes that are currently stored in single- and double-shell tanks at the Hanford Site (LMHC 1999). The IWP is interested in estimates of recharge rates for current conditions and long-term scenarios involving the vadose zone disposal of tank wastes. Simulation modeling with UNSAT-H is one of the methods being used to provide those estimates (e.g., Rockhold et al. 1995; Fayer et al. 1999). To achieve the above goals for assessing water dynamics and estimating recharge rates, the UNSAT-H model addresses soil water infiltration, redistribution, evaporation, plant transpiration, deep drainage, and soil heat flow as one-dimensional processes. The UNSAT-H model simulates liquid water flow using Richards' equation (Richards 1931), water vapor diffusion using Fick's law, and sensible heat flow using the Fourier equation. This report documents UNSAT-H .Version 3.0. The report includes the bases for the conceptual model and its numerical implementation, benchmark test cases, example simulations involving layered soils and plants, and the code manual. Version 3.0 is an, enhanced-capability update of UNSAT-H Version 2.0 (Fayer and Jones 1990). New features include hysteresis, an iterative solution of head and temperature, an energy balance check, the modified Picard solution technique, additional hydraulic functions, multiple-year simulation capability, and general enhancements.

  6. Experimental density and PC-SAFT modeling of Krytox (R) (perfluoropolyether) at pressures to 275 MPa and temperatures to 533 K

    SciTech Connect (OSTI)

    Bamgbade, B. A.; Wu, Y.; Burgess, W. A.

    2012-10-25

    Density data from 298 to 533 K and to 275 MPa are reported for Krytox GPL 102, a poly(perfluoropropyl ether) (PFPE) with a CF3-branched fluoropropylether repeat group. The Tait equation fit to each density isotherm have mean absolute percent deviations (MAPD) between 0.11 and 0.30% with standard deviations (SD) not exceeding 0.20%. The perturbed-chain statistical associating fluid theory (PC-SAFT) fit to the density data has an MAPD of 0.67% and an SD of 0.67%. Likewise the PC-SAFT fit to previously reported density data of Demnum, a PFPE with an n-fluoropropylether repeat group, has an MAPD of 0.22% and a SD of 0.21% for Demnum S-20 and an MAPD of 0.27% with a SD of 0.14% for Demnum S-65. The trends exhibited by the PC-SAFT pure component parameters obtained from the fits of these three PFPEs are similar to those reported for linear and branched hydrocarbons with the same number of carbons.

  7. A system analysis computer model for the High Flux Isotope Reactor (HFIRSYS Version 1)

    SciTech Connect (OSTI)

    Sozer, M.C.

    1992-04-01

    A system transient analysis computer model (HFIRSYS) has been developed for analysis of small break loss of coolant accidents (LOCA) and operational transients. The computer model is based on the Advanced Continuous Simulation Language (ACSL) that produces the FORTRAN code automatically and that provides integration routines such as the Gear`s stiff algorithm as well as enabling users with numerous practical tools for generating Eigen values, and providing debug outputs and graphics capabilities, etc. The HFIRSYS computer code is structured in the form of the Modular Modeling System (MMS) code. Component modules from MMS and in-house developed modules were both used to configure HFIRSYS. A description of the High Flux Isotope Reactor, theoretical bases for the modeled components of the system, and the verification and validation efforts are reported. The computer model performs satisfactorily including cases in which effects of structural elasticity on the system pressure is significant; however, its capabilities are limited to single phase flow. Because of the modular structure, the new component models from the Modular Modeling System can easily be added to HFIRSYS for analyzing their effects on system`s behavior. The computer model is a versatile tool for studying various system transients. The intent of this report is not to be a users manual, but to provide theoretical bases and basic information about the computer model and the reactor.

  8. Hydrogen Macro System Model User Guide, Version 1.2.1

    SciTech Connect (OSTI)

    Ruth, M.; Diakov, V.; Sa, T.; Goldsby, M.; Genung, K.; Hoseley, R.; Smith, A.; Yuzugullu, E.

    2009-07-01

    The Hydrogen Macro System Model (MSM) is a simulation tool that links existing and emerging hydrogen-related models to perform rapid, cross-cutting analysis. It allows analysis of the economics, primary energy-source requirements, and emissions of hydrogen production and delivery pathways.

  9. Moment-Based Probability Modeling and Extreme Response Estimation, The FITS Routine Version 1.2

    SciTech Connect (OSTI)

    MANUEL,LANCE; KASHEF,TINA; WINTERSTEIN,STEVEN R.

    1999-11-01

    This report documents the use of the FITS routine, which provides automated fits of various analytical, commonly used probability models from input data. It is intended to complement the previously distributed FITTING routine documented in RMS Report 14 (Winterstein et al., 1994), which implements relatively complex four-moment distribution models whose parameters are fit with numerical optimization routines. Although these four-moment fits can be quite useful and faithful to the observed data, their complexity can make them difficult to automate within standard fitting algorithms. In contrast, FITS provides more robust (lower moment) fits of simpler, more conventional distribution forms. For each database of interest, the routine estimates the distribution of annual maximum response based on the data values and the duration, T, over which they were recorded. To focus on the upper tails of interest, the user can also supply an arbitrary lower-bound threshold, {chi}{sub low}, above which a shifted distribution model--exponential or Weibull--is fit.

  10. Solergy (Beta Version 1)

    Energy Science and Technology Software Center (OSTI)

    2009-03-30

    SOLERGY simulates the operation and power output of a user-defined solar central receiver power plant for a time period of up to one year. SOLERGY utilizes recorded or simulated weather data and plant component performance models to calculate the power flowing through each part of the solar plant. A plant control subroutine monitors these powers and determines when to operate the various plant subsystems. The original version of the code was released in May 1987,more » within SAND86-8060 and was widely distributed. The Beta Version 1 to be released in 2009, includes some relatively small modifications to the original code.« less

  11. Offshore Wind Guidance Document: Oceanography and Sediment Stability (Version 1) Development of a Conceptual Site Model.

    SciTech Connect (OSTI)

    Roberts, Jesse D.; Jason Magalen; Craig Jones

    2014-06-01

    This guidance document provide s the reader with an overview of the key environmental considerations for a typical offshore wind coastal location and the tools to help guide the reader through a thoro ugh planning process. It will enable readers to identify the key coastal processes relevant to their offshore wind site and perform pertinent analysis to guide siting and layout design, with the goal of minimizing costs associated with planning, permitting , and long - ter m maintenance. The document highlight s site characterization and assessment techniques for evaluating spatial patterns of sediment dynamics in the vicinity of a wind farm under typical, extreme, and storm conditions. Finally, the document des cribe s the assimilation of all of this information into the conceptual site model (CSM) to aid the decision - making processes.

  12. Fuel Cell Power Model Version 2: Startup Guide, System Designs, and Case Studies. Modeling Electricity, Heat, and Hydrogen Generation from Fuel Cell-Based Distributed Energy Systems

    SciTech Connect (OSTI)

    Steward, D.; Penev, M.; Saur, G.; Becker, W.; Zuboy, J.

    2013-06-01

    This guide helps users get started with the U.S. Department of Energy/National Renewable Energy Laboratory Fuel Cell Power (FCPower) Model Version 2, which is a Microsoft Excel workbook that analyzes the technical and economic aspects of high-temperature fuel cell-based distributed energy systems with the aim of providing consistent, transparent, comparable results. This type of energy system would provide onsite-generated heat and electricity to large end users such as hospitals and office complexes. The hydrogen produced could be used for fueling vehicles or stored for later conversion to electricity.

  13. Sensitivity of precipitation to parameter values in the community atmosphere model version 5

    SciTech Connect (OSTI)

    Johannesson, Gardar; Lucas, Donald; Qian, Yun; Swiler, Laura Painton; Wildey, Timothy Michael

    2014-03-01

    One objective of the Climate Science for a Sustainable Energy Future (CSSEF) program is to develop the capability to thoroughly test and understand the uncertainties in the overall climate model and its components as they are being developed. The focus on uncertainties involves sensitivity analysis: the capability to determine which input parameters have a major influence on the output responses of interest. This report presents some initial sensitivity analysis results performed by Lawrence Livermore National Laboratory (LNNL), Sandia National Laboratories (SNL), and Pacific Northwest National Laboratory (PNNL). In the 2011-2012 timeframe, these laboratories worked in collaboration to perform sensitivity analyses of a set of CAM5, 2 runs, where the response metrics of interest were precipitation metrics. The three labs performed their sensitivity analysis (SA) studies separately and then compared results. Overall, the results were quite consistent with each other although the methods used were different. This exercise provided a robustness check of the global sensitivity analysis metrics and identified some strongly influential parameters.

  14. PC/104 Embedded IOCs at Jefferson Lab

    SciTech Connect (OSTI)

    Jianxun Yan, Trent Allison, Sue Witherspoon, Anthony Cuffe

    2009-10-01

    Jefferson Lab has developed embedded IOCs based on PC/104 single board computers (SBC) for low level control systems. The PC/104 IOCs run EPICS on top of the RTEMS operating system. Two types of control system configurations are used in different applications, PC/104 SBC with commercial PC/104 I/O cards and PC/104 SBC with custom designed FPGA-based boards. RTEMS was built with CEXP shell to run on the PC/104 SBC. CEXP shell provides the function of dynamic object loading, which is similar to the widely used VxWorks operating system. Standard software configurations were setup for PC/104 IOC application development to provide a familiar format for new projects as well as ease the conversion of applications from VME based IOCs to PC/104 IOCs. Many new projects at Jefferson Lab are going to employ PC/104 SBCs as IOCs and some applications have already been running them for accelerator operations. The PC/104 - RTEMS IOC provides a free open source Real-Time Operating System (RTOS), low cost/maintenance, easily installed/ configured, flexible, and reliable solution for accelerator control and 12GeV Upgrade projects.

  15. PVWatts Version 5 Manual

    SciTech Connect (OSTI)

    Dobos, A. P.

    2014-09-01

    The NREL PVWatts calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes includes several built-in parameters that are hidden from the user. This technical reference describes the sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimate. This reference is applicable to the significantly revised version of PVWatts released by NREL in 2014.

  16. Simion 3D Version 6.0 User`s Manual

    SciTech Connect (OSTI)

    Dahl, D.A.

    1995-11-01

    The original SIMION was an electrostatic lens analysis and design program developed by D.C. McGilvery at Latrobe University, Bundoora Victoria, Australia, 1977. SIMION for the PC, developed at the Idaho National Engineering Laboratory, shares little more than its name with the original McGilvery version. INEL`s fifth major SIMION release, version 6.0, represents a quantum improvement over previous versions. This C based program can model complex problems using an ion optics workbench that can hold up to 200 2D and/or 3D electrostatic/magnetic potential arrays. Arrays can have up to 10,000,000 points. SIMION 3D`s 32 bit virtual Graphics User Interface provides a highly interactive advanced user environment. All potential arrays are visualized as 3D objects that the user can cut away to inspect ion trajectories and potential energy surfaces. User programs have been greatly extended in versatility and power. A new geometry file option supports the definition of highly complex array geometry. Extensive algorithm modifications have dramatically improved this version`s computational speed and accuracy.

  17. STONIX, Version 0.x

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Version 0.x STONIX, Version 0.x STONIX is a program for configuring UNIX and Linux computer operating systems. May 14, 2015 software STONIX is a program for configuring UNIX and...

  18. DOE/PC/88921--5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE/PC/88921--5 _)/ DE91 004343 DOE Technical Report No. DOE/PC/88921-5 Filth Quarterly Report on Research Grant No. DE-FG22-88PC88921 Title: SPIN-MAPPING OF COAL STRUCTURES WITH ESE AND ENDOR #._; Principal Investigators: R. L. Bellord and R. B. Clarkson ct"_, _' Institution: University of Illinois at Urbana-Champaign Date: December 1, 1989 t. US/DOE Patent Clearance is _ required prior to publication o! this document, " ABSTRACT The broad goals oi this project are Lodetermine by

  19. Version pressure feedback mechanisms for speculative versioning caches

    Office of Scientific and Technical Information (OSTI)

    (Patent) | SciTech Connect Version pressure feedback mechanisms for speculative versioning caches Citation Details In-Document Search Title: Version pressure feedback mechanisms for speculative versioning caches Mechanisms are provided for controlling version pressure on a speculative versioning cache. Raw version pressure data is collected based on one or more threads accessing cache lines of the speculative versioning cache. One or more statistical measures of version pressure are

  20. Sophia Library Version 12

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    Sophia Library Version 12 is the source code shared by all the executables related to the Sophia package.

  1. Modeling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PVLibMatlab Permalink Gallery Sandia Labs Releases New Version of PVLib Toolbox Modeling, News, Photovoltaic, Solar Sandia Labs Releases New Version of PVLib Toolbox Sandia has released version 1.3 of PVLib, its widely used Matlab toolbox for modeling photovoltaic (PV) power systems. The version 1.3 release includes the following added functions: functions to estimate parameters for popular PV module models, including PVsyst and the CEC '5 parameter' model a new model of the effects of solar

  2. GENII Version 2 Users Guide

    SciTech Connect (OSTI)

    Napier, Bruce A.

    2004-03-08

    The GENII Version 2 computer code was developed for the Environmental Protection Agency (EPA) at Pacific Northwest National Laboratory (PNNL) to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) and the radiological risk estimating procedures of Federal Guidance Report 13 into updated versions of existing environmental pathway analysis models. The resulting environmental dosimetry computer codes are compiled in the GENII Environmental Dosimetry System. The GENII system was developed to provide a state-of-the-art, technically peer-reviewed, documented set of programs for calculating radiation dose and risk from radionuclides released to the environment. The codes were designed with the flexibility to accommodate input parameters for a wide variety of generic sites. Operation of a new version of the codes, GENII Version 2, is described in this report. Two versions of the GENII Version 2 code system are available, a full-featured version and a version specifically designed for demonstrating compliance with the dose limits specified in 40 CFR 61.93(a), the National Emission Standards for Hazardous Air Pollutants (NESHAPS) for radionuclides. The only differences lie in the limitation of the capabilities of the user to change specific parameters in the NESHAPS version. This report describes the data entry, accomplished via interactive, menu-driven user interfaces. Default exposure and consumption parameters are provided for both the average (population) and maximum individual; however, these may be modified by the user. Source term information may be entered as radionuclide release quantities for transport scenarios, or as basic radionuclide concentrations in environmental media (air, water, soil). For input of basic or derived concentrations, decay of parent radionuclides and ingrowth of radioactive decay products prior to the start of the exposure scenario may be considered. A single code run can accommodate unlimited numbers of radionuclides including the source term and any radionuclides that accumulate from decay of the parent, because the system works sequentially on individual decay chains. The code package also provides interfaces, through the Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES), for external calculations of atmospheric dispersion, geohydrology, biotic transport, and surface water transport.

  3. Femaxi-6 Version 1

    Energy Science and Technology Software Center (OSTI)

    2006-10-01

    FEMAXI-6(Updated) predicts the thermal and mechanical behaviour of a light water reactor fuel rod during normal and transient (not accident) conditions. It can analyse the integral behaviour of a whole fuel rod throughout its life as well as the localised behaviour of a small part of fuel rod. Temperature distribution, radial and axial deformations, fission gas release, and inner gas pressure are calculated as a function of irradiation time and axial position. Stresses and strainsmore » in the pellet and cladding are calculated and PCMI analysis is performed. Also, thermal conductivity degradation of pellet and cladding waterside oxidation are modeled. Its analytical capabilities also cover the boiling transient anticipated in BWR. RODBURN calculates the power generation density profile in the radial and axial directions and fast neutron flux, and concentrations of fission product isotopes and fissile materials of a single rod irradiated in PWR, BWR and Halden BWR. RODBURN gives an output file which can be read by FEMAXI-6. NEA-1080/10: This version differs from the previous one in the following: a few formulae were updated in the manual and the source code. the input options were expanded in the following points: Thermal expansion modelling; Pellet swelling option; Pellet plasticity model; Cladding surface heat transfer model All changes are marked in red in the reference report.« less

  4. Sophia Daemon Version 12

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    Sophia Daemon Version 12 contains the code that is exclusively used by the ‘sophiad’ application. It runs as a service on a Linux host and analyzes network traffic obtained from libpcap and produces a network fingerprint based on hosts and channels. Sophia Daemon Version 12 can, if desired by the user, produce alerts when its fingerprint changes. Sophia Daemon Version 12 can receive data from another Sophia Daemon or raw packet data. It can outputmore » data to another Sophia Daemon Version 12, OglNet Version 12 or MySQL. Sophia Daemon Version 12 runs in a passive real-time manner that allows it to be used on a SCADA network. Its network fingerprint is designed to be applicable to SCADA networks rather than general IT networks.« less

  5. MDF Overview (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the Manufacturing Demonstration Facilities (MDF) overview video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  6. A Multi-Year Plan for Enhancing Turbulence Modeling in Hydra-TH Revised and Updated Version 2.0

    SciTech Connect (OSTI)

    Smith, Thomas M.; Berndt, Markus; Baglietto, Emilio; Magolan, Ben

    2015-10-01

    The purpose of this report is to document a multi-year plan for enhancing turbulence modeling in Hydra-TH for the Consortium for Advanced Simulation of Light Water Reactors (CASL) program. Hydra-TH is being developed to the meet the high- fidelity, high-Reynolds number CFD based thermal hydraulic simulation needs of the program. This work is being conducted within the thermal hydraulics methods (THM) focus area. This report is an extension of THM CASL milestone L3:THM.CFD.P10.02 [33] (March, 2015) and picks up where it left off. It will also serve to meet the requirements of CASL THM level three milestone, L3:THM.CFD.P11.04, scheduled for completion September 30, 2015. The objectives of this plan will be met by: maturation of recently added turbulence models, strategic design/development of new models and systematic and rigorous testing of existing and new models and model extensions. While multi-phase turbulent flow simulations are important to the program, only single-phase modeling will be considered in this report. Large Eddy Simulation (LES) is also an important modeling methodology. However, at least in the first year, the focus is on steady-state Reynolds Averaged Navier-Stokes (RANS) turbulence modeling.

  7. APEX user`s guide - (Argonne production, expansion, and exchange model for electrical systems), version 3.0

    SciTech Connect (OSTI)

    VanKuiken, J.C.; Veselka, T.D.; Guziel, K.A.; Blodgett, D.W.; Hamilton, S.; Kavicky, J.A.; Koritarov, V.S.; North, M.J.; Novickas, A.A.; Paprockas, K.R.

    1994-11-01

    This report describes operating procedures and background documentation for the Argonne Production, Expansion, and Exchange Model for Electrical Systems (APEX). This modeling system was developed to provide the U.S. Department of Energy, Division of Fossil Energy, Office of Coal and Electricity with in-house capabilities for addressing policy options that affect electrical utilities. To meet this objective, Argonne National Laboratory developed a menu-driven programming package that enables the user to develop and conduct simulations of production costs, system reliability, spot market network flows, and optimal system capacity expansion. The APEX system consists of three basic simulation components, supported by various databases and data management software. The components include (1) the investigation of Costs and Reliability in Utility Systems (ICARUS) model, (2) the Spot Market Network (SMN) model, and (3) the Production and Capacity Expansion (PACE) model. The ICARUS model provides generating-unit-level production-cost and reliability simulations with explicit recognition of planned and unplanned outages. The SMN model addresses optimal network flows with recognition of marginal costs, wheeling charges, and transmission constraints. The PACE model determines long-term (e.g., longer than 10 years) capacity expansion schedules on the basis of candidate expansion technologies and load growth estimates. In addition, the Automated Data Assembly Package (ADAP) and case management features simplify user-input requirements. The ADAP, ICARUS, and SMN modules are described in detail. The PACE module is expected to be addressed in a future publication.

  8. A Generic Biogeochemical Module for Earth System Models: Next Generation BioGeoChemical Module (NGBGC), Version 1.0

    SciTech Connect (OSTI)

    Fang, Yilin; Huang, Maoyi; Liu, Chongxuan; Li, Hongyi; Leung, Lai-Yung R.

    2013-11-13

    Physical and biogeochemical processes regulate soil carbon dynamics and CO2 flux to and from atmosphere, influencing global climate changes. Integration of these processes into earth system models (e.g., community land models (CLM)), however, currently faces three major challenges: 1) extensive efforts are required to modify modeling structures and to rewrite computer programs to incorporate new or updated processes as new knowledge is being generated, 2) computational cost is prohibitively expensive to simulate biogeochemical processes in land models due to large variations in the rates of biogeochemical processes, and 3) various mathematical representations of biogeochemical processes exist to incorporate different aspects of fundamental mechanisms, but systematic evaluation of the different mathematical representations is difficult, if not possible. To address these challenges, we propose a new computational framework to easily incorporate physical and biogeochemical processes into land models. The new framework consists of a new biogeochemical module with a generic algorithm and reaction database so that new and updated processes can be incorporated into land models without the need to manually set up the ordinary differential equations to be solved numerically. The reaction database consists of processes of nutrient flow through the terrestrial ecosystems in plants, litter and soil. This framework facilitates effective comparison studies of biogeochemical cycles in an ecosystem using different conceptual models under the same land modeling framework. The approach was first implemented in CLM and benchmarked against simulations from the original CLM-CN code. A case study was then provided to demonstrate the advantages of using the new approach to incorporate a phosphorus cycle into the CLM model. To our knowledge, the phosphorus-incorporated CLM is a new model that can be used to simulate phosphorus limitation on the productivity of terrestrial ecosystems.

  9. CalTOX (registered trademark), A multimedia total exposure model spreadsheet user's guide. Version 4.0(Beta)

    SciTech Connect (OSTI)

    McKone, T.E.; Enoch, K.G.

    2002-08-01

    CalTOX has been developed as a set of spreadsheet models and spreadsheet data sets to assist in assessing human exposures from continuous releases to multiple environmental media, i.e. air, soil, and water. It has also been used for waste classification and for setting soil clean-up levels at uncontrolled hazardous wastes sites. The modeling components of CalTOX include a multimedia transport and transformation model, multi-pathway exposure scenario models, and add-ins to quantify and evaluate uncertainty and variability. All parameter values used as inputs to CalTOX are distributions, described in terms of mean values and a coefficient of variation, rather than as point estimates or plausible upper values such as most other models employ. This probabilistic approach allows both sensitivity and uncertainty analyses to be directly incorporated into the model operation. This manual provides CalTOX users with a brief overview of the CalTOX spreadsheet model and provides instructions for using the spreadsheet to make deterministic and probabilistic calculations of source-dose-risk relationships.

  10. Testing ice microphysics parameterizations in the NCAR Community Atmospheric Model Version 3 using Tropical Warm Pool-International Cloud Experiment data

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wang, Weiguo; Liu, Xiaohong; Xie, Shaocheng; Boyle, Jim; McFarlane, Sally A.

    2009-07-23

    Here, cloud properties have been simulated with a new double-moment microphysics scheme under the framework of the single-column version of NCAR Community Atmospheric Model version 3 (CAM3). For comparison, the same simulation was made with the standard single-moment microphysics scheme of CAM3. Results from both simulations compared favorably with observations during the Tropical Warm Pool–International Cloud Experiment by the U.S. Department of Energy Atmospheric Radiation Measurement Program in terms of the temporal variation and vertical distribution of cloud fraction and cloud condensate. Major differences between the two simulations are in the magnitude and distribution of ice water content within themore » mixed-phase cloud during the monsoon period, though the total frozen water (snow plus ice) contents are similar. The ice mass content in the mixed-phase cloud from the new scheme is larger than that from the standard scheme, and ice water content extends 2 km further downward, which is in better agreement with observations. The dependence of the frozen water mass fraction on temperature from the new scheme is also in better agreement with available observations. Outgoing longwave radiation (OLR) at the top of the atmosphere (TOA) from the simulation with the new scheme is, in general, larger than that with the standard scheme, while the surface downward longwave radiation is similar. Sensitivity tests suggest that different treatments of the ice crystal effective radius contribute significantly to the difference in the calculations of TOA OLR, in addition to cloud water path. Numerical experiments show that cloud properties in the new scheme can respond reasonably to changes in the concentration of aerosols and emphasize the importance of correctly simulating aerosol effects in climate models for aerosol-cloud interactions. Further evaluation, especially for ice cloud properties based on in-situ data, is needed.« less

  11. Text-Alternative Version: Webcast of the Renewable Energy Competency Model: An Aid to Build a Renewable Energy Skilled Workforce

    Broader source: Energy.gov [DOE]

    This is the Webcast of Renewable Energy and Competency model. Led by Linda Silverman an economist at Energy Efficiency and Renewable Energy and Pam Frugoli Department of Labor. This webcast was on...

  12. Versioning Complex Data

    SciTech Connect (OSTI)

    Macduff, Matt C.; Lee, Benno; Beus, Sherman J.

    2014-06-29

    Using the history of ARM data files, we designed and demonstrated a data versioning paradigm that is feasible. Assigning versions to sets of files that are modified with some special assumptions and domain specific rules was effective in the case of ARM data, which has more than 5000 datastreams and 500TB of data.

  13. Greenland and Antarctic mass balances for present and doubled atmospheric CO{sub 2} from the GENESIS version-2 global climate model

    SciTech Connect (OSTI)

    Thompson, S.L.; Pollard, D.

    1997-05-01

    As anthropogenic greenhouse warming occurs in the next century, changes in the mass balances of Greenland and Antarctica will probably accelerate and may have significant effects on global sea level. Recent trends and possible future changes in these mass balances have received considerable attention in the glaciological literature, but until recently relatively few general circulation modeling (GCM) studies have focused on the problem. However, there are two significant problems in using GCMs to predict mass balance distributions on ice sheets: (i) the relatively coarse GCM horizontal resolution truncates the topography of the ice-sheet flanks and smaller ice sheets such as Greenland, and (ii) the snow and ice physics in most GCMs does not include ice-sheet-specific processes such as the refreezing of meltwater. Two techniques are described that attack these problems, involving (i) an elevation-based correction to the surface meteorology and (ii) a simple a posteriori correction for the refreezing of meltwater following Pfeiffer et al. Using these techniques in a new version 2 of the Global Environmental and Ecological Simulation of Interactive Systems global climate model, the authors present global climate and ice-sheet mass-balance results from two equilibrated runs for present and doubled atmospheric CO{sub 2}. This GCM is well suited for ice-sheet mass-balance studies because (a) the surface can be represented at a finer resolution (2{degrees} lat x 2{degrees} long) than the atmospheric GCM, (b) the two correction techniques are included as part of the model, and the model`s mass balances for present-day Greenland and Antarctica are realistic. 131 refs., 23 figs., 2 tabs.

  14. Sophia Client Version 12

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    Sophia Client Version 12 offers command line access to the Sophia Daemon and the Sophia database files. It provides print, fingerprint, acknowledge, color coding and status access to these other resources.

  15. Sophia Support Version 12

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    Sophia Support Version 12 is the assemblage of scripts and files that turn the Sophia tool suite source code into the Sophia Debian installation package that is used by Ubuntu 10.04 LTS.

  16. Underwire Version 12 (SOPHIA)

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    Underwire Version 12 is code that provides generic functionality that is common between several projects of these authors. This functionality provides a common API for such things as logging and signal handling that speed up development of new applications.

  17. DOE/PC/89870-Tl,(Suppl,)

    Office of Scientific and Technical Information (OSTI)

    -Tl,(Suppl,) (DE92011C12) ,11 COMPARISON OF SLURRY VERSUS FIXED-BED REACTOR COSTS FOR ' INDIRECT LIQUEFACTION APPLICATIONS A Supplement to Final Report Design of Slurry Reactor tor Indirect Liquefaction Applications By Anand Prakash Prakash G. Bendale =, December 1991 Work Performed Under Contract No. AC22.89PC89870 Viking Systems International Pittsburgh, Pennsylvania p DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the

  18. CTH Version 11.0

    SciTech Connect (OSTI)

    2014-10-22

    The CTH suite of computer codes is a flexible software system designed to treat a wide range of shock wave propagation and material motion phenomena in one, two or three dimensions. CTH has models suitable for most conditions encountered in shock physics including material strength, fracture, distended materials, high explosives, and a variety of boundary conditions. The material equation-of-state models allow description of most states of matter normally encountered in shock physics. A powerful suite of on-the-fly and post-processing analysis options are available which can generate three-dimensional, two-dimensional, and one-dimensional color and contour plots. History plots of thermo-mechanical data at spatially fixed and material fixed points can be generated. CTH is available for a variety of computers ranging from a single PC to massively-parallel distributed-data systems.

  19. CTH Version 11.0

    Energy Science and Technology Software Center (OSTI)

    2014-10-22

    The CTH suite of computer codes is a flexible software system designed to treat a wide range of shock wave propagation and material motion phenomena in one, two or three dimensions. CTH has models suitable for most conditions encountered in shock physics including material strength, fracture, distended materials, high explosives, and a variety of boundary conditions. The material equation-of-state models allow description of most states of matter normally encountered in shock physics. A powerful suitemore » of on-the-fly and post-processing analysis options are available which can generate three-dimensional, two-dimensional, and one-dimensional color and contour plots. History plots of thermo-mechanical data at spatially fixed and material fixed points can be generated. CTH is available for a variety of computers ranging from a single PC to massively-parallel distributed-data systems.« less

  20. SHMTools, Version 0.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SHMTools, Version 0.1 SHMTools, Version 0.1 SHMTools is a MATLAB package that facilitates the construction of structural health monitoring (SHM) processes. September 24, 2013...

  1. Preliminary Thermal Modeling of Hi-Storm 100S-218 Version B Storage Modules at Hope Creek Nuclear Power Station ISFSI

    SciTech Connect (OSTI)

    Cuta, Judith M.; Adkins, Harold E.

    2013-08-30

    This report fulfills the M3 milestone M3FT-13PN0810022, Report on Inspection 1, under Work Package FT-13PN081002. Thermal analysis is being undertaken at Pacific Northwest National Laboratory (PNNL) in support of inspections of selected storage modules at various locations around the United States, as part of the Used Fuel Disposition Campaign of the U.S. Department of Energy, Office of Nuclear Energy (DOE-NE) Fuel Cycle Research and Development. This report documents pre-inspection predictions of temperatures for four modules at the Hope Creek Nuclear Generating Station ISFSI that have been identified as candidates for inspection in late summer or early fall/winter of 2013. These are HI-STORM 100S-218 Version B modules storing BWR 8x8 fuel in MPC-68 canisters. The temperature predictions reported in this document were obtained with detailed COBRA-SFS models of these four storage systems, with the following boundary conditions and assumptions.

  2. Conceptual Design of Supercritical O2-Based PC Boiler (Technical...

    Office of Scientific and Technical Information (OSTI)

    Conceptual Design of Supercritical O2-Based PC Boiler Citation Details In-Document Search Title: Conceptual Design of Supercritical O2-Based PC Boiler You are accessing a ...

  3. Conceptual Design of Supercritical O2-Based PC Boiler (Technical...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Conceptual Design of Supercritical O2-Based PC Boiler Citation Details In-Document Search Title: Conceptual Design of Supercritical O2-Based PC Boiler No abstract ...

  4. Version No.: 2002.001

    U.S. Energy Information Administration (EIA) Indexed Site

    ,,,,,,"OMB No. 1905-0175" ,,,..."Expiration Date: 12312017" ,,,..."Version No.: 2015.01" "MONTHLY REPORT OF ...

  5. mpiP Version 3.0

    Energy Science and Technology Software Center (OSTI)

    2006-08-07

    For applications that make use of MPI communication libraries, the lightweight MPI profiling tool mpiP Version 3 provides a library that can generate MPI profile data based on time spent in MPI calls, the communication volume of the MPI calls and the volume of I/O from MPI-I/O calls. The mpiP out put is generated as a text report that can present summary information or specific detail of the call site data for each task. Themore » library also provides an API that users and tool developers can use to access mpiP functionality, such as timers, stack traces, and PC address-to-source translation.« less

  6. Transport Version 3

    Energy Science and Technology Software Center (OSTI)

    2008-05-16

    The Transport version 3 (T3) system uses the Network News Transfer Protocol (NNTP) to move data from sources to a Data Reporisoty (DR). Interested recipients subscribe to newsgroups to retrieve data. Data in transport is protected by AES-256 and RSA cryptographic services provided by the external OpenSSL cryptographic libraries.

  7. TriBITS lifecycle model. Version 1.0, a lean/agile software lifecycle model for research-based computational science and engineering and applied mathematical software.

    SciTech Connect (OSTI)

    Willenbring, James M.; Bartlett, Roscoe Ainsworth; Heroux, Michael Allen

    2012-01-01

    Software lifecycles are becoming an increasingly important issue for computational science and engineering (CSE) software. The process by which a piece of CSE software begins life as a set of research requirements and then matures into a trusted high-quality capability is both commonplace and extremely challenging. Although an implicit lifecycle is obviously being used in any effort, the challenges of this process - respecting the competing needs of research vs. production - cannot be overstated. Here we describe a proposal for a well-defined software lifecycle process based on modern Lean/Agile software engineering principles. What we propose is appropriate for many CSE software projects that are initially heavily focused on research but also are expected to eventually produce usable high-quality capabilities. The model is related to TriBITS, a build, integration and testing system, which serves as a strong foundation for this lifecycle model, and aspects of this lifecycle model are ingrained in the TriBITS system. Here, we advocate three to four phases or maturity levels that address the appropriate handling of many issues associated with the transition from research to production software. The goals of this lifecycle model are to better communicate maturity levels with customers and to help to identify and promote Software Engineering (SE) practices that will help to improve productivity and produce better software. An important collection of software in this domain is Trilinos, which is used as the motivation and the initial target for this lifecycle model. However, many other related and similar CSE (and non-CSE) software projects can also make good use of this lifecycle model, especially those that use the TriBITS system. Indeed this lifecycle process, if followed, will enable large-scale sustainable integration of many complex CSE software efforts across several institutions.

  8. EnergyPlus Version 6

    Energy Science and Technology Software Center (OSTI)

    2011-01-14

    EnergyPlus is a whole building energy simulation program that engineers, architects, and researchers use to model energy and water use in buildings. Modeling the performance of a building with EnergyPlus enables building professionals to optimize the building design to use less energy and water. Each version of EnergyPlus is tested extensively before release. EnergyPlus models heating, cooling, lighting, ventilation, other energy flows, and water use. EnergyPlus includes many innovative simulation capabilities: time-steps less than anmore » hour, modular systems and plant integrated with heat balance-based zone simulation, multizone air flow, thermal comfort, water use, natural ventilation, and photovoltaic systems. Read about new features. EnergyPlus runs on the Windows, Macintosh, and Linux platforms. Free add-ons and other third-party software products are available for use with EnergyPlus.« less

  9. EnergyPlus Version 7

    Energy Science and Technology Software Center (OSTI)

    2011-11-01

    EnergyPlus is a whole building energy simulation program that engineers, architects and researchers use to model energy and water use in buildings. Modeling the performance of a building with EnergyPlus enables building professionals to optimize the building design to use less energy and water. Each version of EnergyPlus is tested extensively before release. EnergyPlus models heating, cooling, lighting, ventilation, other energy flows, and water use. EnergyPlus includes many innovation simulation capabilities: time-steps less than anmore » hour, modular systems and plant integrated with heat balance-based zone simulation, multizone air flow, thermal comfort, water use, natural ventilation, and photovoltaic systems. EnergyPlus runs on the Windows, Macintosh, and Linux platforms. Free add-ons and other third party software products are available for use with EnergyPlus.« less

  10. Version pressure feedback mechanisms for speculative versioning caches

    Office of Scientific and Technical Information (OSTI)

    (Patent) | SciTech Connect Version pressure feedback mechanisms for speculative versioning caches Citation Details In-Document Search Title: Version pressure feedback mechanisms for speculative versioning caches × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science

  11. FAROW Version 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    THEORY MANUAL FOR FAROW VERSION 1 .1 : umerical Analysis of the Fatigue and Reliability of Wind Turbine ii /; , Component5 i I' I Steven R. Winterstein / Department of Civil Engineering Stanford University Stanford, California Paul S. Veers Wind Energy Technology Department Sandia National Laboratories Albuquerque, NM SAND94-2459 Unlimited Release Printed January 2000 Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sand& Corporation. NOTICE:

  12. MOBILE4. 1: Highway-vehicle mobile-source emission-factor model (Apple MacIntosh version) (for microcomputers). Model-Simulation

    SciTech Connect (OSTI)

    Not Available

    1991-08-01

    MOBILE4.1 is the latest revision to EPA's highway vehicle mobile source emission factor model. Relative to MOBILE4, it contains numerous revisions and provides the user with additional options for modeling highway vehicle emission factors. it will calculate emission factors for hydrocarbons (HC), carbon monoxide, (CO), and oxides of nitrogen (NOx) from highway motor vehicles. It calculates emission factors for eight individual vehicle types, in two regions of the country (low and high altitude). The emission factors depend on various conditions such as ambient temperature, fuel volatility, speed, and mileage accrual rates. It will estimate emission factors for any calendar year between 1960 and 2020 inclusive. The 25 most recent model years are considered in operation in each calendar year. EPA is requiring that states and others preparing emission inventories for nonattainment areas for CO and ozone to use MOBILE4.1 in the development of the base year 1990 emission inventories required under the Clean Air Act of 1990.

  13. CEMI Industrial Efficiency (text version)

    Broader source: Energy.gov [DOE]

    Below is the text version for the Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video.  

  14. Embrittlement data base, version 1

    SciTech Connect (OSTI)

    Wang, J.A.

    1997-08-01

    The aging and degradation of light-water-reactor (LWR) pressure vessels is of particular concern because of their relevance to plant integrity and the magnitude of the expected irradiation embrittlement. The radiation embrittlement of reactor pressure vessel (RPV) materials depends on many different factors such as flux, fluence, fluence spectrum, irradiation temperature, and preirradiation material history and chemical compositions. These factors must be considered to reliably predict pressure vessel embrittlement and to ensure the safe operation of the reactor. Based on embrittlement predictions, decisions must be made concerning operating parameters and issues such as low-leakage-fuel management, possible life extension, and the need for annealing the pressure vessel. Large amounts of data from surveillance capsules and test reactor experiments, comprising many different materials and different irradiation conditions, are needed to develop generally applicable damage prediction models that can be used for industry standards and regulatory guides. Version 1 of the Embrittlement Data Base (EDB) is such a comprehensive collection of data resulting from merging version 2 of the Power Reactor Embrittlement Data Base (PR-EDB). Fracture toughness data were also integrated into Version 1 of the EDB. For power reactor data, the current EDB lists the 1,029 Charpy transition-temperature shift data points, which include 321 from plates, 125 from forgoings, 115 from correlation monitor materials, 246 from welds, and 222 from heat-affected-zone (HAZ) materials that were irradiated in 271 capsules from 101 commercial power reactors. For test reactor data, information is available for 1,308 different irradiated sets (352 from plates, 186 from forgoings, 303 from correlation monitor materials, 396 from welds and 71 from HAZs) and 268 different irradiated plus annealed data sets.

  15. PC Board Mountable Corrosion Sensors - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Technologies Industrial Technologies Find More Like This Return to Search PC Board Mountable Corrosion Sensors Sandia National Laboratories Contact SNL About This Technology Publications: PDF Document Publication Market Sheet (1,115 KB) PC-mount corrosion sensors of various serpentine widths. Capacitive sensor shown on far right. PC-mount corrosion sensors of various serpentine widths. Capacitive sensor shown on far right. A line of corrosion sensors of various widths and thicknesses

  16. Adversary Sequence Interruption Model

    Energy Science and Technology Software Center (OSTI)

    1985-11-15

    PC EASI is an IBM personal computer or PC-compatible version of an analytical technique for measuring the effectiveness of physical protection systems. PC EASI utilizes a methodology called Estimate of Adversary Sequence Interruption (EASI) which evaluates the probability of interruption (PI) for a given sequence of adversary tasks. Probability of interruption is defined as the probability that the response force will arrive before the adversary force has completed its task. The EASI methodology is amore » probabilistic approach that analytically evaluates basic functions of the physical security system (detection, assessment, communications, and delay) with respect to response time along a single adversary path. It is important that the most critical scenarios for each target be identified to ensure that vulnerabilities have not been overlooked. If the facility is not overly complex, this can be accomplished by examining all paths. If the facility is complex, a global model such as Safeguards Automated Facility Evaluation (SAFE) may be used to identify the most vulnerable paths. PC EASI is menu-driven with screen forms for entering and editing the basic scenarios. In addition to evaluating PI for the basic scenario, the sensitivities of many of the parameters chosen in the scenario can be analyzed. These sensitivities provide information to aid the analyst in determining the tradeoffs for reducing the probability of interruption. PC EASI runs under the Micro Data Base Systems'' proprietary database management system Knowledgeman. KMAN provides the user environment and file management for the specified basic scenarios, and KGRAPH the graphical output of the sensitivity calculations. This software is not included. Due to errors in release 2 of KMAN, PC EASI will not execute properly; release 1.07 of KMAN is required.« less

  17. version 1 | OpenEI Community

    Open Energy Info (EERE)

    update utility Utility Companies utility rate Utility Rates version 1 version 2 version 3 web service Smart meter After several months of development and testing, the next...

  18. Assessing Energy Resources Webinar Text Version | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Text Version Assessing Energy Resources Webinar Text Version Download the text version of the audio from the DOE Office of Indian Energy webinar on assessing energy resources. PDF ...

  19. Comparison of experimental and analytical temperatures achieved by DT-18 and PC-1 shipping containers during hypothetical thermal accident tests

    SciTech Connect (OSTI)

    Anderson, J.C.

    1992-03-01

    Temperatures were monitored at various locations on DT-18 and PC-1 shipping packages during furnace tests at the Y-12 Plant in Oak Ridge, Tennessee. The furnace tests are intended to simulate hypothetical thermal accident conditions specified in Title 10 CFR, Pt. 71.73 (c)(3). Maximum temperatures of the outer containers ranged from 750 to 965{degrees}C while typical maximum temperatures recorded on the inner containers were 60 to 77{degrees}C. One exceptionally high temperature of 196{degrees}C occurred on the PC-1 inner container. Heating 7.1 models of both the DT-18 and PC-1 packages were developed. Models with and without heat generation in the inner containers were developed for each shipping package. The models with heat generation are intended to simulate condensation and convection of hot vapors generated during the heating of the Celotex{trademark} insulating material used in the packages. In general, the analytical models calculate temperatures for the outer containers which agree well with the test data. The HEATING models with and without heat generation bound the inner container test data. These findings are significant in that they lead to the conclusion that heat is transferred to the inner containers through a mechanism other than conduction alone. The high temperature of 196{degrees}C recorded at the PC-1 inner container is within 4{degrees}C of the maximum temperature calculated by the PC-1 HEATING model with heat generation.

  20. User`s guide and documentation manual for ``PC-Gel`` simulator

    SciTech Connect (OSTI)

    Chang, Ming-Ming; Gao, Hong W.

    1993-10-01

    PC-GEL is a three-dimensional, three-phase (oil, water, and gas) permeability modification simulator developed by incorporating an in-situ gelation model into a black oil simulator (BOAST) for personal computer application. The features included in the simulator are: transport of each chemical species of the polymer/crosslinker system in porous media, gelation reaction kinetics of the polymer with crosslinking agents, rheology of the polymer and gel, inaccessible pore volume to macromolecules, adsorption of chemical species on rock surfaces, retention of gel on the rock matrix, and permeability reduction caused by the adsorption of polymer and gel. The in-situ gelation model and simulator were validated against data reported in the literature. The simulator PC-GEL is useful for simulating and optimizing any combination of primary production, waterflooding, polymer flooding, and permeability modification treatments. A general background of permeability modification using crosslinked polymer gels is given in Section I and the governing equations, mechanisms, and numerical solutions of PC-GEL are given in Section II. Steps for preparing an input data file with reservoir and gel-chemical transport data, and recurrent data are described in Sections III and IV, respectively. Example data inputs are enclosed after explanations of each input line to help the user prepare data files. Major items of the output files are reviewed in Section V. Finally, three sample problems for running PC-GEL are described in Section VI, and input files and part of the output files of these problems are listed in the appendices. For the user`s reference a copy of the source code of PC-GEL computer program is attached in Appendix A.

  1. Enforcing positivity in intrusive PC-UQ methods for reactive ODE systems

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Najm, Habib N.; Valorani, Mauro

    2014-04-12

    We explore the relation between the development of a non-negligible probability of negative states and the instability of numerical integration of the intrusive Galerkin ordinary differential equation system describing uncertain chemical ignition. To prevent this instability without resorting to either multi-element local polynomial chaos (PC) methods or increasing the order of the PC representation in time, we propose a procedure aimed at modifying the amplitude of the PC modes to bring the probability of negative state values below a user-defined threshold. This modification can be effectively described as a filtering procedure of the spectral PC coefficients, which is applied on-the-flymore » during the numerical integration when the current value of the probability of negative states exceeds the prescribed threshold. We demonstrate the filtering procedure using a simple model of an ignition process in a batch reactor. This is carried out by comparing different observables and error measures as obtained by non-intrusive Monte Carlo and Gauss-quadrature integration and the filtered intrusive procedure. Lastly, the filtering procedure has been shown to effectively stabilize divergent intrusive solutions, and also to improve the accuracy of stable intrusive solutions which are close to the stability limits.« less

  2. Three-Dimensional Inversion of Magnetotelluric Data on a PC,...

    Open Energy Info (EERE)

    Inversion of Magnetotelluric Data on a PC, Methodology and Applications to the Coso Geothermal Field Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference...

  3. brulilo, Version 0.x

    Energy Science and Technology Software Center (OSTI)

    2015-04-16

    brulilo is a Python package for building and evolving thermonuclear reaction networks, such as those used in astrophysical explosion calculations. It is very much a current work in progress, and much of the intended functionality is still under development. The main goal of brulilo is an easy-to-use code for quick calculations or post-processing, as well as a learning tool to test various implementations of solvers on both CPUs and GPUs. Currently, brulilo parses an inputmore » text file that specifies the reactions to be included in the network. The notation of the inputs are in the typical astrophysical notation; i.e. hydrogen burning to deuterium in the sun, "p + p + e --> d + neutrino", is given as "p(p,)d." Each reaction is added to a list comprising the reaction network, and once completed, the network contains a list of all isotopes and reactions involved. brulilo then parses publicly available nuclear data (binding energy, spin, partition function data, etc.) for each isotope from the WebNucleo group's data at nucleo.ces.clemson.edu. Fits to reaction rate data for each reaction are obtained from the publicly available data provided by the Joint Institute for Nuclear Astrophysics' Reaclib database. Reverse reactions are calculated from detailed balance. The reaction network then consists of a sparse system of mathematically stiff ordinary differential equations (ODEs). Physically, "stiffness" here means that there are some reaction rates that are occurring much faster than others; the ratio of the fast to slow often being greater than 10^15 in astrophysics. Numerical integration of such systems typically involves implicit integration schemes, which brulilo will leverage from the scientific computing Python package, Numpy, as well as implement its own. There has recently been work from researchers at Oak Ridge National Lab who have found good results from applying quasi-equilibrium and quasi-asymptotic conditions to the stiff system of ODEs, which effectively remove some of the stiffness and allow for efficient explicit integration techniques to be used. The original intent of brulilo was to implement these stiffness-alleviating techniques with explicit integrators and compare the performance to traditional implicit integrations of the full stiff system. This is still underway, as the code is very much in an alpha-release state. Furthermore, explicit integrators are often much easier to parallelize than their implicit counterparts. brulilo will implement parallelization of these techniques, leveraging both the Python implementation of MPI, mpi4py, as well as highly parallelized versions targeted at GPUs with PyOpenCL and/or PyCUDA.« less

  4. IES version 2013 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 IES version 2013 PDF icon Tax Deduction Qualified Software - IES <Virtual Environment> version 2013 More Documents & Publications Tax Deduction Qualified Software: Trace 700 version 6.2.10 Tax Deduction Qualified Software TRACE 700 version 6.3.0 Tax Deduction Qualified Software: EnergyPlus version 8.0.0.008

  5. Solar Webinar Text Version | Department of Energy

    Energy Savers [EERE]

    Text Version Solar Webinar Text Version Download the text version of the audio from the DOE Office of Indian Energy webinar on solar renewable energy. PDF icon DOE Office of Indian Energy Foundational Course on Solar: Text Version More Documents & Publications SERC Photovoltaics for Residential Buildings Webinar Transcript text_alternative_stat_webinar_2012_8_15.doc Wind Webinar Text Version

  6. Version Control Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Verification & Validation Verification and Validation (V&V) provides assurance that the models in the codes produce mathematically correct answers and that the answers reflect physical reality. The V&V subprogram funds the critical skills needed to apply systematic measurement, documentation, and demonstration of the ability of the models and codes to predict physical behavior. The V&V subprogram is developing and implementing Uncertainty Quantification (UQ) methodologies as part

  7. New Version of FAST Released

    Broader source: Energy.gov [DOE]

    NREL recently released a more robust version of its FAST software under a modularization framework that represents a generational change in how computer-aided engineering (CAE) tools are developed.

  8. Checkpointing in speculative versioning caches

    DOE Patents [OSTI]

    Eichenberger, Alexandre E; Gara, Alan; Gschwind, Michael K; Ohmacht, Martin

    2013-08-27

    Mechanisms for generating checkpoints in a speculative versioning cache of a data processing system are provided. The mechanisms execute code within the data processing system, wherein the code accesses cache lines in the speculative versioning cache. The mechanisms further determine whether a first condition occurs indicating a need to generate a checkpoint in the speculative versioning cache. The checkpoint is a speculative cache line which is made non-speculative in response to a second condition occurring that requires a roll-back of changes to a cache line corresponding to the speculative cache line. The mechanisms also generate the checkpoint in the speculative versioning cache in response to a determination that the first condition has occurred.

  9. GNATSCVS Version 0.4

    Energy Science and Technology Software Center (OSTI)

    2004-04-02

    GNATSCVS is a set of utilities for loosely integratig the GNATS bug tracking system with the CVS version control system. This allows bug fixes to be bound to bug reports.

  10. Gasoline prices increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    gasoline prices increase (short version) The U.S. average retail price for regular gasoline rose to 3.69 a gallon on Monday. That's up 1.2 cents from a week ago, based on the ...

  11. Packet Daemon Version 12(SOPHIA)

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    Packet Daemon Version 12 is the code exclusively used by the ‘packetd’ executable. It provides packet data to the OglNet Version 12 visualization tool. It reads PCAP data and sends an abstraction of the packets to the ‘oglnet’ executable for display. ‘packetd’will run as a service on a Linux host thereby capturing data continuously and make that data available for ‘oglnet’ whenever it connects to the service.

  12. Biomass Webinar Text Version | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Text Version Biomass Webinar Text Version Dowload the text version of the audio from the DOE Office of Indian Energy webinar on biomass. PDF icon DOE Office of Indian Energy ...

  13. Demonstration of a PC 25 Fuel Cell in Russia

    SciTech Connect (OSTI)

    John C. Trocciola; Thomas N. Pompa; Linda S. Boyd

    2004-09-01

    This project involved the installation of a 200kW PC25C{trademark} phosphoric-acid fuel cell power plant at Orgenergogaz, a Gazprom industrial site in Russia. In April 1997, a PC25C{trademark} was sold by ONSI Corporation to Orgenergogaz, a subsidiary of the Russian company ''Gazprom''. Due to instabilities in the Russian financial markets, at that time, the unit was never installed and started by Orgenergogaz. In October of 2001 International Fuel Cells (IFC), now known as UTC Fuel Cells (UTCFC), received a financial assistance award from the United States Department of Energy (DOE) entitled ''Demonstration of PC 25 Fuel Cell in Russia''. Three major tasks were part of this award: the inspection of the proposed site and system, start-up assistance, and installation and operation of the powerplant.

  14. UQTk version 2.0 user manual.

    SciTech Connect (OSTI)

    Debusschere, Bert J.; Sargsyan, Khachik; Safta, Cosmin

    2013-10-01

    The UQ Toolkit (UQTk) is a collection of libraries and tools for the quanti cation of uncer- tainty in numerical model predictions. Version 2.0 o ers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity anal- ysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

  15. Impact of horizontal resolution on simulation of precipitation extremes in an aqua-planet version of the Community Atmosphere Model (CAM)

    SciTech Connect (OSTI)

    Li, F.; Collins, W.D.; Wehner, M.F.; Williamson, D.L.; Olson, J.G.; Algieri, C.

    2011-03-01

    One key question regarding current climate models is whether the projection of climate extremes converges to a realistic representation as the spatial and temporal resolutions of the model are increased. Ideally the model extreme statistics should approach a fixed distribution once the resolutions are commensurate with the characteristic length and time scales of the processes governing the formation of the extreme phenomena of interest. In this study, a series of AGCM runs with idealized 'aquaplanet-steady-state' boundary conditions have been performed with the Community Atmosphere Model CAM3 to investigate the effect of horizontal resolution on climate extreme simulations. The use of the aquaplanet framework highlights the roles of model physics and dynamics and removes any apparent convergence in extreme statistics due to better resolution of surface boundary conditions and other external inputs. Assessed at a same large spatial scale, the results show that the horizontal resolution and time step have strong effects on the simulations of precipitation extremes. The horizontal resolution has a much stronger impact on precipitation extremes than on mean precipitation. Updrafts are strongly correlated with extreme precipitation at tropics at all the resolutions, while positive low-tropospheric temperature anomalies are associated with extreme precipitation at mid-latitudes.

  16. FESTR, Version 0.x

    Energy Science and Technology Software Center (OSTI)

    2015-07-10

    FESTR is a modeling tool for calculating spectroscopic-quality synthetic outputs (e.g., spectra and images) based on (in general) the time evolutions of 3-D spatial distributions of materials characterized by their chemical composition, temperature, and density conditions. FESTR performs raytracing across unstructured meshes, builds intrinsic optical properties of mixed materials by performing equation-of-state lookups in external data, and then solves the radiation-transport equation along rays to obtain emergent time and space resolved synthetic spectra. These resultsmore » can be further processed into time and/or space integrated spectra, as well as into spectral-band-integrated synthetic images, radiated power histories, and total radiated energy values. FESTR is also applicable to spatial reconstructions of material properties via the analysis of experimental data.« less

  17. FESTR, Version 0.x

    SciTech Connect (OSTI)

    Hakel, Peter

    2015-07-10

    FESTR is a modeling tool for calculating spectroscopic-quality synthetic outputs (e.g., spectra and images) based on (in general) the time evolutions of 3-D spatial distributions of materials characterized by their chemical composition, temperature, and density conditions. FESTR performs raytracing across unstructured meshes, builds intrinsic optical properties of mixed materials by performing equation-of-state lookups in external data, and then solves the radiation-transport equation along rays to obtain emergent time and space resolved synthetic spectra. These results can be further processed into time and/or space integrated spectra, as well as into spectral-band-integrated synthetic images, radiated power histories, and total radiated energy values. FESTR is also applicable to spatial reconstructions of material properties via the analysis of experimental data.

  18. Simulating operations at Glen Canyon Dam, Colorado River Storage Project, Arizona gcflow version 1.4 (for microcomputers). Model-Simulation

    SciTech Connect (OSTI)

    1996-06-01

    This product is a modeling tool for examining the amount and pattern of daily water releases from Glen Canyon Dam under various operational constraints. This program is an extension of the geometric model used by Western Area Power Administration and is primarily an educational tool. It is designed to help the user understand hydropower operations at Glen Canyon Dam and to illustrate how the alternatives examined in the Glen Canyon Dam Environmental Impact Statement affect power production. This program demonstrates, in a simplified way, the relationship between monthly release volume, flow constraints, lake elevation, and power production.

  19. Reduced-Order Model for the Geochemical Impacts of Carbon Dioxide, Brine and Trace Metal Leakage into an Unconfined, Oxidizing Carbonate Aquifer, Version 2.1

    SciTech Connect (OSTI)

    Bacon, Diana H.

    2013-03-31

    The National Risk Assessment Partnership (NRAP) consists of 5 U.S DOE national laboratories collaborating to develop a framework for predicting the risks associated with carbon sequestration. The approach taken by NRAP is to divide the system into components, including injection target reservoirs, wellbores, natural pathways including faults and fractures, groundwater and the atmosphere. Next, develop a detailed, physics and chemistry-based model of each component. Using the results of the detailed models, develop efficient, simplified models, termed reduced order models (ROM) for each component. Finally, integrate the component ROMs into a system model that calculates risk profiles for the site. This report details the development of the Groundwater Geochemistry ROM for the Edwards Aquifer at PNNL. The Groundwater Geochemistry ROM for the Edwards Aquifer uses a Wellbore Leakage ROM developed at LANL as input. The detailed model, using the STOMP simulator, covers a 5x8 km area of the Edwards Aquifer near San Antonio, Texas. The model includes heterogeneous hydraulic properties, and equilibrium, kinetic and sorption reactions between groundwater, leaked CO2 gas, brine, and the aquifer carbonate and clay minerals. Latin Hypercube sampling was used to generate 1024 samples of input parameters. For each of these input samples, the STOMP simulator was used to predict the flux of CO2 to the atmosphere, and the volume, length and width of the aquifer where pH was less than the MCL standard, and TDS, arsenic, cadmium and lead exceeded MCL standards. In order to decouple the Wellbore Leakage ROM from the Groundwater Geochemistry ROM, the response surface was transformed to replace Wellbore Leakage ROM input parameters with instantaneous and cumulative CO2 and brine leakage rates. The most sensitive parameters proved to be the CO2 and brine leakage rates from the well, with equilibrium coefficients for calcite and dolomite, as well as the number of illite and kaolinite sorption sites proving to be of secondary importance. The Groundwater Geochemistry ROM was developed using nonlinear regression to fit the response surface with a quadratic polynomial. The goodness of fit was excellent for the CO2 flux to the atmosphere, and very good for predicting the volumes of groundwater exceeding the pH, TDS, As, Cd and Pb threshold values.

  20. ASSESSMENT OF RADIONUCLIDES DATABASES IN CAP88 MAINFRAME VERSION 1.0 AND WINDOWS-BASED VERSION 3.0

    SciTech Connect (OSTI)

    Farfan, E.; Lee, P.; Jannik, T.; Donnelly, E.

    2008-09-16

    In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants (NESHAP) regulations. CAP88 Mainframe, referred to as Version 1.0 on the Environmental Protection Agency (EPA) website (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based Version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection (ICRP) Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, thirty-five radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, one hundred and twenty-two radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

  1. NREL Releases New Version of Energy Evaluation Software - News Releases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL NREL Releases New Version of Energy Evaluation Software January 4, 2005 Golden, Colo. - Researchers at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) recently released Version 2.1 of HOMER, a micropower optimization software model that simplifies the task of evaluating design options for both off-grid and grid-connected power systems. Users supply information about electrical loads, renewable resources and component costs and HOMER simulates multiple designs

  2. Wind Webinar Text Version | Department of Energy

    Energy Savers [EERE]

    Text Version Wind Webinar Text Version Download the text version of the audio from the DOE Office of Indian Energy webinar on wind renewable energy. PDF icon Text Version of the DOE Office of Indian Energy Foundational Course on Wind More Documents & Publications SERC Photovoltaics for Residential Buildings Webinar Transcript strategiesforsuccessfulenergymanagement.doc Biomass Webinar

  3. A New Two-Moment Bulk Stratiform Cloud Microphysics Scheme in the Community Atmosphere Model, Version 3 (CAM3). Part II: Single-Column and Global Results

    SciTech Connect (OSTI)

    Gettelman, A.; Morrison, H.; Ghan, Steven J.

    2008-08-11

    The global performance of a new 2-moment cloud microphysics scheme for a General Circulation Model (GCM) is presented and evaluated relative to observations. The scheme produces reasonable representations of cloud particle size and number concentration when compared to observations, and represents expected and observed spatial variations in cloud microphysical quantities. The scheme has smaller particles and higher number concentrations over land than the standard bulk microphysics in the GCM, and is able to balance the radiation budget of the planet with 60% the liquid water of the standard scheme, in better agreement with observations. The new scheme treats both the mixing ratio and number concentration of rain and snow, and is therefore able to differentiate the two key regimes, consisting of drizzle in shallow warm clouds and larger rain drops in deeper cloud systems. The modeled rain and snow size distributions are consistent with observations.

  4. Directory of Energy Information Administration Models 1993

    SciTech Connect (OSTI)

    Not Available

    1993-07-06

    This directory contains descriptions about each model, including the title, acronym, purpose, followed by more detailed information on characteristics, uses, and requirements. Sources for additional information are identified. Included in this directory are 35 EIA models active as of May 1, 1993. Models that run on personal computers are identified by ``PC`` as part of the acronym. EIA is developing new models, a National Energy Modeling System (NEMS), and is making changes to existing models to include new technologies, environmental issues, conservation, and renewables, as well as extend forecast horizon. Other parts of the Department are involved in this modeling effort. A fully operational model is planned which will integrate completed segments of NEMS for its first official application--preparation of EIA`s Annual Energy Outlook 1994. Abstracts for the new models will be included in next year`s version of this directory.

  5. PCDAS Version 2. 2: Remote network control and data acquisition

    SciTech Connect (OSTI)

    Fishbaugher, M.J.

    1987-09-01

    This manual is intended for both technical and non-technical people who want to use the PCDAS remote network control and data acquisition software. If you are unfamiliar with remote data collection hardware systems designed at Pacific Northwest Laboratory (PNL), this introduction should answer your basic questions. Even if you have some experience with the PNL-designed Field Data Acquisition Systems (FDAS), it would be wise to review this material before attempting to set up a network. This manual was written based on the assumption that you have a rudimentary understanding of personal computer (PC) operations using Disk Operating System (DOS) version 2.0 or greater (IBM 1984). You should know how to create subdirectories and get around the subdirectory tree.

  6. Preliminary Thermal Modeling of HI-Storm 100S-218 Version B Storage Modules at Hope Creek Cuclear Power Station ISFSI

    SciTech Connect (OSTI)

    Cuta, Judith M.; Adkins, Harold E.

    2013-08-30

    As part of the Used Fuel Disposition Campaign of the U. S. Department of Energy, Office of Nuclear Energy (DOE-NE) Fuel Cycle Research and Development, a consortium of national laboratories and industry is performing visual inspections and temperature measurements of selected storage modules at various locations around the United States. This report documents thermal analyses in in support of the inspections at the Hope Creek Nuclear Generating Station ISFSI. This site utilizes the HI-STORM100 vertical storage system developed by Holtec International. This is a vertical storage module design, and the thermal models are being developed using COBRA-SFS (Michener, et al., 1987), a code developed by PNNL for thermal-hydraulic analyses of multi assembly spent fuel storage and transportation systems. This report describes the COBRA-SFS model in detail, and presents pre-inspection predictions of component temperatures and temperature distributions. The final report will include evaluation of inspection results, and if required, additional post-test calculations, with appropriate discussion of results.

  7. SophiNet Version 12

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    SophiNet Version 12 is part of the code contained in the application ‘oglnet’ and comprises the portions that make ‘oglnet’ receive and display Sophia data from the Sophia Daemon ‘sophiad’. Specifically this encompasses the channel, host and alert receiving and the treeview HUD widget.

  8. Gasoline prices decrease (Short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Short version) The U.S. average retail price for regular gasoline fell to $3.65 a gallon on Monday. That's down 2.8 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  9. Gasoline prices decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices decrease (short version) The U.S. average retail price for regular gasoline fell to $3.68 a gallon on Monday. That's down 2.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  10. Gasoline prices decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices decrease (short version) The U.S. average retail price for regular gasoline fell to $3.67 a gallon on Monday. That's down 3-tenths of a penny from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  11. Gasoline prices decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.63 a gallon on Monday. That's down 2.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  12. IES version 6.1

    Broader source: Energy.gov [DOE]

    On this page you'll find information about the IES version 6.1 qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  13. CCAIN, Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2005-05-26

    CCAIN, Version 1.0 Date: 06/15/2005 This software is an instantiation of Common Component Architecture (CCA) framework written in C. The framework is used to compose (create, register, destroy) C, C++, and Fortran components into a running CCA application. Language bindings are provided for F90 and F03 to allow codes in these languages to interface with the framework.

  14. Nuclear Energy Advanced Modeling and Simulation Waste Integrated Performance and Safety Codes (NEAMS Waste IPSC) verification and validation plan. version 1.

    SciTech Connect (OSTI)

    Bartlett, Roscoe Ainsworth; Arguello, Jose Guadalupe, Jr.; Urbina, Angel; Bouchard, Julie F.; Edwards, Harold Carter; Freeze, Geoffrey A.; Knupp, Patrick Michael; Wang, Yifeng; Schultz, Peter Andrew; Howard, Robert; McCornack, Marjorie Turner

    2011-01-01

    The objective of the U.S. Department of Energy Office of Nuclear Energy Advanced Modeling and Simulation Waste Integrated Performance and Safety Codes (NEAMS Waste IPSC) is to provide an integrated suite of computational modeling and simulation (M&S) capabilities to quantitatively assess the long-term performance of waste forms in the engineered and geologic environments of a radioactive-waste storage facility or disposal repository. To meet this objective, NEAMS Waste IPSC M&S capabilities will be applied to challenging spatial domains, temporal domains, multiphysics couplings, and multiscale couplings. A strategic verification and validation (V&V) goal is to establish evidence-based metrics for the level of confidence in M&S codes and capabilities. Because it is economically impractical to apply the maximum V&V rigor to each and every M&S capability, M&S capabilities will be ranked for their impact on the performance assessments of various components of the repository systems. Those M&S capabilities with greater impact will require a greater level of confidence and a correspondingly greater investment in V&V. This report includes five major components: (1) a background summary of the NEAMS Waste IPSC to emphasize M&S challenges; (2) the conceptual foundation for verification, validation, and confidence assessment of NEAMS Waste IPSC M&S capabilities; (3) specifications for the planned verification, validation, and confidence-assessment practices; (4) specifications for the planned evidence information management system; and (5) a path forward for the incremental implementation of this V&V plan.

  15. Nuclear Energy -- Knowledge Base for Advanced Modeling and Simulation (NE-KAMS) Code Verification and Validation Data Standards and Requirements: Fluid Dynamics Version 1.0

    SciTech Connect (OSTI)

    Greg Weirs; Hyung Lee

    2011-09-01

    V&V and UQ are the primary means to assess the accuracy and reliability of M&S and, hence, to establish confidence in M&S. Though other industries are establishing standards and requirements for the performance of V&V and UQ, at present, the nuclear industry has not established such standards or requirements. However, the nuclear industry is beginning to recognize that such standards are needed and that the resources needed to support V&V and UQ will be very significant. In fact, no single organization has sufficient resources or expertise required to organize, conduct and maintain a comprehensive V&V and UQ program. What is needed is a systematic and standardized approach to establish and provide V&V and UQ resources at a national or even international level, with a consortium of partners from government, academia and industry. Specifically, what is needed is a structured and cost-effective knowledge base that collects, evaluates and stores verification and validation data, and shows how it can be used to perform V&V and UQ, leveraging collaboration and sharing of resources to support existing engineering and licensing procedures as well as science-based V&V and UQ processes. The Nuclear Energy Knowledge base for Advanced Modeling and Simulation (NE-KAMS) is being developed at the Idaho National Laboratory in conjunction with Bettis Laboratory, Sandia National Laboratories, Argonne National Laboratory, Utah State University and others with the objective of establishing a comprehensive and web-accessible knowledge base to provide V&V and UQ resources for M&S for nuclear reactor design, analysis and licensing. The knowledge base will serve as an important resource for technical exchange and collaboration that will enable credible and reliable computational models and simulations for application to nuclear power. NE-KAMS will serve as a valuable resource for the nuclear industry, academia, the national laboratories, the U.S. Nuclear Regulatory Commission (NRC) and the public and will help ensure the safe, economical and reliable operation of existing and future nuclear reactors.

  16. SPIN (Version 3. 83): A Fortran program for modeling one-dimensional rotating-disk/stagnation-flow chemical vapor deposition reactors

    SciTech Connect (OSTI)

    Coltrin, M.E. ); Kee, R.J.; Evans, G.H.; Meeks, E.; Rupley, F.M.; Grcar, J.F. )

    1991-08-01

    In rotating-disk reactor a heated substrate spins (at typical speeds of 1000 rpm or more) in an enclosure through which the reactants flow. The rotating disk geometry has the important property that in certain operating regimes{sup 1} the species and temperature gradients normal to the disk are equal everywhere on the disk. Thus, such a configuration has great potential for highly uniform chemical vapor deposition (CVD),{sup 2--5} and indeed commercial rotating-disk CVD reactors are now available. In certain operating regimes, the equations describing the complex three-dimensional spiral fluid motion can be solved by a separation-of-variables transformation{sup 5,6} that reduces the equations to a system of ordinary differential equations. Strictly speaking, the transformation is only valid for an unconfined infinite-radius disk and buoyancy-free flow. Furthermore, only some boundary conditions are consistent with the transformation (e.g., temperature, gas-phase composition, and approach velocity all specified to be independent of radius at some distances above the disk). Fortunately, however, the transformed equations will provide a very good practical approximation to the flow in a finite-radius reactor over a large fraction of the disk (up to {approximately}90% of the disk radius) when the reactor operating parameters are properly chosen, i.e, high rotation rates. In the limit of zero rotation rate, the rotating disk flow reduces to a stagnation-point flow, for which a similar separation-of-variables transformation is also available. Such flow configurations ( pedestal reactors'') also find use in CVD reactors. In this report we describe a model formulation and mathematical analysis of rotating-disk and stagnation-point CVD reactors. Then we apply the analysis to a compute code called SPIN and describe its implementation and use. 31 refs., 4 figs.

  17. Implications of a J{sup PC} exotic

    SciTech Connect (OSTI)

    P.R. Page

    1997-09-01

    Recent experimental data from BNL on the isovector J{sup PC} = 1{sup {-+}} exotic at 1.6 GeV indicate the existence of a non-quarkonium state consistent with lattice gauge theory predictions. The authors discuss how further experiments can strengthen this conclusion. They show that the {rho}{pi}, {eta}{prime}{pi} and {eta}{pi} couplings of this state qualitatively support the hypothesis that it is a hybrid meson, although other interpretations cannot be eliminated.

  18. MeGAMerge, Version 1.0

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MeGAMerge, Version 1.0 MeGAMerge, Version 1.0 A novel method of merging of multiple genomic assembly or long read data sources for assembly September 3, 2015 software MetaGenomic...

  19. Energy & Manufacturing Workforce Training Topics List - Version...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Manufacturing Workforce Training Topics List - Version 1.7 (02.11.14) Energy & Manufacturing Workforce Training Topics List - Version 1.7 (02.11.14) View this searchable list of ...

  20. Managing Financing Programs-- Spreadsheet Models (Text Version)

    Broader source: Energy.gov [DOE]

    Chris: - financial market development team. I'm really glad that all of you have been able to take time out of your busy days to come and share some time with us talking about using spreadsheet...

  1. Hydropower Baseline Cost Modeling, Version 2

    SciTech Connect (OSTI)

    O'Connor, Patrick W.

    2015-09-01

    Recent resource assessments conducted by the United States Department of Energy have identified significant opportunities for expanding hydropower generation through the addition of power to non-powered dams and on undeveloped stream-reaches. Additional interest exists in the powering of existing water resource infrastructure such as conduits and canals, upgrading and expanding existing hydropower facilities, and the construction new pumped storage hydropower. Understanding the potential future role of these hydropower resources in the nation’s energy system requires an assessment of the environmental and techno-economic issues associated with expanding hydropower generation. To facilitate these assessments, this report seeks to fill the current gaps in publically available hydropower cost estimating tools that can support the national-scale evaluation of hydropower resources.

  2. Gasoline prices decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices decrease (long version) The U.S. average retail price for regular gasoline fell to $3.70 a gallon on Monday. That's down 1.4 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 4.01 a gallon, down 4.2 cents from a week ago. Prices were lowest in the Rocky Mountain States at 3.47 a gallon, remaining unchanged from last week

  3. Gasoline prices decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    5, 2014 Gasoline prices decrease (long version) The U.S. average retail price for regular gasoline fell to $3.68 a gallon on Monday. That's down 2.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast states at 4.06 a gallon, down 1.8 cents from a week ago. Prices were lowest in the Gulf Coast region at 3.47 a gallon, down 2.6 cents.This is Amerine Woodyard, with EIA, in Washington.

  4. Gasoline prices decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    long version) The U.S. average retail price for regular gasoline fell to $3.65 a gallon on Monday. That's down 2.8 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 3.93 a gallon, down 1.9 cents from a week ago. Prices were lowest in the Gulf Coast States at 3.37 a gallon, down 2.6 cents

  5. Gasoline prices decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    long version) The U.S. average retail price for regular gasoline fell to $3.63 a gallon on Monday. That's down 2.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 3.89 a gallon, up a penny from a week ago. Prices were lowest in the Gulf Coast States at 3.38 a gallon, down 3.9 cents

  6. Microsoft PowerPoint - Final translated version of Tsinghua Speech...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final translated version of Tsinghua Speech Microsoft PowerPoint - Final translated version of Tsinghua Speech PDF icon Microsoft PowerPoint - Final translated version of Tsinghua ...

  7. Geothermal Webinar Presentation Slides and Text Version | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Geothermal Webinar Presentation Slides and Text Version Geothermal Webinar Presentation Slides and Text Version Download presentation slides and a text version of the audio from ...

  8. METHANE DE-NOX FOR UTILITY PC BOILERS

    SciTech Connect (OSTI)

    Joseph Rabovitser; Bruce Bryan; Serguei Nester; Stan Wohadlo

    2001-10-30

    The project seeks to develop and validate a new pulverized coal combustion system to reduce utility PC boiler NO{sub x} emissions to 0.15 lb/million Btu or less without post-combustion flue gas cleaning. Work during the quarter included completion of the equipment fabrication and installation efforts for the 3-million Btu/h pilot system at BBP's Pilot-Scale Combustion Facility (PSCF) in Worcester, MA. Final selection of the first two test coals and preliminary selection of the final two test coals were also completed.

  9. UPC Language and Library Specifications, Version 1.3

    SciTech Connect (OSTI)

    UPC Consortium; Bonachea, Dan; Funck, Gary

    2013-11-16

    UPC is an explicitly parallel extension to the ISO C 99 Standard. UPC follows the partitioned global address space programming model. This document is the formal specification for the UPC language and library syntax and semantics, and supersedes prior specification version 1.2 (LBNL-59208).

  10. SAMRSolvers Version 0.1

    Energy Science and Technology Software Center (OSTI)

    2006-09-01

    SAMRSolvers is a collection of multilevel solvers for systems of linear equations that result from finite volume discretization of an elliptic partial differential equation on a block-structure (or patch-based) locally refined grid. SAMRSolvers provides implementations of the Fast Adaptive Composite grid (FAC) method, and the AFACx method, which is a less expensive version of AFAC that smooths the error instead of solving for it on all but the coarsest level. These methods can be shownmore » to converge at rates that are independent of the number of refinement levels. SAMRSolvers is intended for use with SAMRAIV2.0 and requires the SAMRUtilities package.« less

  11. ARM - Kim Nitschke Interview (English Version)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DeployementKim Nitschke Interview (English Version) Azores Deployment AMF Home Graciosa Island Home Data Plots and Baseline Instruments Satellite Retrievals Experiment Planning...

  12. ARM - Carlos Sousa Interview (English Version)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DeployementCarlos Sousa Interview (English Version) Azores Deployment AMF Home Graciosa Island Home Data Plots and Baseline Instruments Satellite Retrievals Experiment Planning...

  13. Manufacturing Ecosystems and Keystone Technologies (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the Manufacturing Ecosystems and Keystone Technologies video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  14. IES version 2012 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Tax Deduction Qualified Software - IES version 2012 More Documents & Publications Building Technologies Program: Tax Deduction Qualified Software - ...

  15. DOE and Critical Materials Video (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the "DOE and Critical Materials" video presented at the Critical Materials Workshop, held on April 3, 2012 in Arlington, Virginia.

  16. Fuel Cell Animation- Chemical Process (Text Version)

    Broader source: Energy.gov [DOE]

    This text version of the fuel cell animation demonstrates how a fuel cell uses hydrogen to produce electricity, with only water and heat as byproducts.

  17. Welcome and Advanced Manufacturing Partnership (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the Welcome and Advanced Manufacturing Partnership video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  18. Power-cable-carrier control (PC/sup 3/) system

    SciTech Connect (OSTI)

    Alvis, R.L.; Wally, K.; Rosborough, J.R.

    1981-04-01

    A control system has been developed that uses a carrier signal imposed on an existing ac power circuit to transmit commands. This system was specifically developed to control an entire solar collector field by sending sun-tracking information to the trough collectors or by commanding them to assume safe positions (STOW) if out-of-limit conditions were encountered. Objectives were to develop a control system that operates reliably and has enough functions to control an entire collector field, yet do it at less cost than for conventional approaches. Development, design, operating characteristics, and field testing and results of the new system, the Power Cable Carrier Control (PC/sup 3/) System are described.

  19. VZCOMML©, Version 4.0 - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    VZCOMML©, Version 4.0 A Multi-Layer Vadose Zone Contaminant Muigration Modeling Program Savannah River National Laboratory Contact SRNL About This Technology Technology Marketing Summary A researcher at the Savannah River Site has developed an analytical software application to simulate contaminant fate and transport through the vadose zone to groundwater. VZCOMML© (pronounced Vee-Zee-Com-M-L) is a one-dimensional, three-phase equilibrium, analytical contaminant transport model incorporating

  20. Aerosol specification in single-column Community Atmosphere Model...

    Office of Scientific and Technical Information (OSTI)

    Aerosol specification in single-column Community Atmosphere Model version 5 Title: Aerosol specification in single-column Community Atmosphere Model version 5 Single-column model ...

  1. ROSE Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2005-02-17

    ROSE is an object-oriented software infrastructure for source-to-source translation that provides an interface for programmers to write their own specialized translators for optimizing scientific applications. ROSE is a part of current research on telescoping languages, which provides optimizations of the use of libraries in scientific applications. ROSE defines approaches to extend the optimization techniques, common in well defined languages, to the optimization of scientific applications using well defined libraries. ROSE includes a rich set ofmore » tools for generating customized transformations to support optimization of applications codes. We currently support full C and C++ (including template instantiation etc.), with Fortran 90 support under development as part of a collaboration and contract with Rice to use their version of the open source Open64 F90 front-end. ROSE represents an attempt to define an open compiler infrastructure to handle the full complexity of full scale DOE applications codes using the languages common to scientific computing within DOE. We expect that such an infrastructure will also be useful for the development of numerous tools that may then realistically expect to work on DOE full scale applications.« less

  2. VruiNet Version 12(SOPHIA)

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    VruiNet Version 12 is the code used exclusively by the executable ‘vruinet’. VruiNet Version 12 provides a wrapper around the code for ‘oglnet’ that makes it compatible for VRUI systems such as the CAVE at CAES.

  3. P.C. 21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS; BWR...

    Office of Scientific and Technical Information (OSTI)

    Erosioncorrosion-induced pipe wall thinning in US Nuclear Power Plants Wu, P.C. 21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS; BWR TYPE REACTORS; PIPES; CORROSION; EROSION;...

  4. Correlating High Power Conversion Efficiency of PTB7:PC71BM Inverted Organic Solar Cells with Nanoscale Structures

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Das, Sanjib; Keum, Jong Kahk; Browning, Jim; Gu, Gong; Yang, Bin; Do, Changwoo; Chen, Wei; Chen, Jihua; Ivanov, Ilia N; Hong, Kunlun; et al

    2015-01-01

    Advances in materials design and device engineering led to inverted organic solar cells (i-OSCs) with superior power conversion efficiencies (PCEs) to their conventional counterparts, in addition to the well-known better ambient stability. Despite the significant progress, however, it has so far been unclear how the morphologies of the photoactive layer and its interface with the cathode modifying layer impact device performance. Here, we report an in-depth morphology study of the i-OSC active and cathode modifying layers, employing a model system with the well-established bulk-heterojunction, PTB7:PC71BM as the active layer and poly-[(9,9-bis(3 -(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) as the cathode surface modifying layer. Wemore » have also identified the role of a processing additive, 1,8-diiodooctane (DIO), used in the spin-casting of the active layer to increase PCE. Using a variety of characterization techniques, we demonstrate that the high PCEs of i-OSCs are due to the smearing (diffusion) of electron-accepting PC71BM into the PFN layer, resulting in improved electron transport. The PC71BM diffusion occurs after spin-casting the active layer onto the PFN layer, when residual solvent molecules act as a plasticizer. The DIO additive, with a higher boiling point than the host solvent, has a longer residence time in the spin-cast active layer, resulting in more PC71BM smearing and therefore more efficient electron transport. This work provides important insight and guidance to further enhancement of i-OSC performance by materials and interface engineering.« less

  5. Correlating High Power Conversion Efficiency of PTB7:PC71BM Inverted Organic Solar Cells to Nanoscale Structure

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Das, Sanjib; Keum, Jong Kahk; Browning, Jim; Gu, Gong; Yang, Bin; Do, Changwoo; Chen, Wei; Chen, Jihua; Ivanov, Ilia N; Hong, Kunlun; et al

    2015-07-16

    Advances in materials design and device engineering led to inverted organic solar cells (i-OSCs) with superior power conversion efficiencies (PCEs) to their conventional counterparts, in addition to the well-known better ambient stability. Despite the significant progress, however, it has so far been unclear how the morphologies of the photoactive layer and its interface with the cathode modifying layer impact device performance. Here, we report an in-depth morphology study of the i-OSC active and cathode modifying layers, employing a model system with the well-established bulk-heterojunction, PTB7:PC71BM as the active layer and poly-[(9,9-bis(3 -(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) as the cathode surface modifying layer. Wemorehave also identified the role of a processing additive, 1,8-diiodooctane (DIO), used in the spin-casting of the active layer to increase PCE. Using a variety of characterization techniques, we demonstrate that the high PCEs of i-OSCs are due to the smearing (diffusion) of electron-accepting PC71BM into the PFN layer, resulting in improved electron transport. The PC71BM diffusion occurs after spin-casting the active layer onto the PFN layer, when residual solvent molecules act as a plasticizer. The DIO additive, with a higher boiling point than the host solvent, has a longer residence time in the spin-cast active layer, resulting in more PC71BM smearing and therefore more efficient electron transport. This work provides important insight and guidance to further enhancement of i-OSC performance by materials and interface engineering.less

  6. DOE Releases Updated Versions of EnergyPlus and OpenStudio | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Releases Updated Versions of EnergyPlus and OpenStudio DOE Releases Updated Versions of EnergyPlus and OpenStudio September 30, 2015 - 4:24pm Addthis DOE Releases Updated Versions of EnergyPlus and OpenStudio Amir Roth, Ph.D. Amir Roth, Ph.D. Building Energy Modeling Technology Manager With the end of fiscal year 2015 approaching, DOE is releasing updates to its flagship building energy modeling software products. EnergyPlus 8.4.0 is the second update released this year; updates are

  7. GENII Version 2 Software Design Document

    SciTech Connect (OSTI)

    Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

    2004-03-08

    This document describes the architectural design for the GENII-V2 software package. This document defines details of the overall structure of the software, the major software components, their data file interfaces, and specific mathematical models to be used. The design represents a translation of the requirements into a description of the software structure, software components, interfaces, and necessary data. The design focuses on the major components and data communication links that are key to the implementation of the software within the operating framework. The purpose of the GENII-V2 software package is to provide the capability to perform dose and risk assessments of environmental releases of radionuclides. The software also has the capability of calculating environmental accumulation and radiation doses from surface water, groundwater, and soil (buried waste) media when an input concentration of radionuclide in these media is provided. This report represents a detailed description of the capabilities of the software product with exact specifications of mathematical models that form the basis for the software implementation and testing efforts. This report also presents a detailed description of the overall structure of the software package, details of main components (implemented in the current phase of work), details of data communication files, and content of basic output reports. The GENII system includes the capabilities for calculating radiation doses following chronic and acute releases. Radionuclide transport via air, water, or biological activity may be considered. Air transport options include both puff and plume models, each allow use of an effective stack height or calculation of plume rise from buoyant or momentum effects (or both). Building wake effects can be included in acute atmospheric release scenarios. The code provides risk estimates for health effects to individuals or populations; these can be obtained using the code by applying appropriate risk factors to the effective dose equivalent or organ dose. In addition, Version 2 uses cancer risk factors from Federal Guidance Report 13 to estimate risk to specific organs or tissues.

  8. Nissan Video 2 (Text Version)

    Broader source: Energy.gov [DOE]

    Narrator: Charlie Yaeger is 97 years old. He's been driving for more than 80 years. He's driven everything from a Ford Model T to Nissan Maxima to a 1916 Baker Electric.

  9. Minions Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2012-02-20

    Establishes the input/output dependencies between individual application tasks, schedules and executes them on available computing resources in order of their dependencies. Uses statistical modeling algorithms to summarize the properties of the tasks to present to users a compact view of the surrent state of the overall application tasks and the effectiveness of various runtime optimizations on such tasks to improve utility of scheduling. Finally, uses statistical models to predict availability of computing resources

  10. MDF Form and Function (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the Manufacturing Demonstration Facilities (MDF) Form and Function video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  11. Gasoline prices up this week (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to 3.78 a gallon on Monday. That's up 3.7 cents from a week ago and up almost 43 cents from 4 weeks ago,...

  12. Gasoline prices inch down (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices inch down (long version) The U.S. average retail price for regular ... Pump prices were highest in the West Coast region at 3.96 a gallon, down 4.2 cents from a ...

  13. Gasoline prices inch down slightly (short version)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    short version) The U.S. average retail price for regular gasoline fell slightly to 3.54 a gallon on Monday. That's down 6-tenths of a penny from a week ago, based on the weekly...

  14. Gasoline prices inch down (Short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose slightly to 3.66 a gallon on Monday. That's up nine tenths of a penny from a week ago, based on the weekly ...

  15. Gasoline prices fall slightly (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell slightly to 3.49 a gallon on Monday. That's down 4-tenths of a penny from a week ago, based on the weekly ...

  16. Gasoline prices show sharp increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline saw its sharpest increase this year at 3.54 a gallon on Monday. That's up 18.1 cents from a week ago, based on ...

  17. Vehicle Technologies Office: Lightweighting Video Text Version

    Broader source: Energy.gov [DOE]

    This is a text version of the Motorweek video segment Materials Technology / Vehicle Lightweighting, which aired on April 21, 2014. The full video is on the Lightweight Materials for Cars and...

  18. New version of PTRACE. Internal report

    SciTech Connect (OSTI)

    Penner, S.

    1985-01-30

    A modified version of PTRACE has been created containing some features that are useful in ray tracing calculations for the NBS microtron. The modified version, called STRACE, will run with an input data deck from PTRACE, producing essentially the same results but with improved numerical accuracy and slightly faster computation time. The new features and the changes in input data needed to activate them are discussed. (LEW)

  19. Available Paper Versions of TUNL Evaluations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Available Paper Versions of TUNL Evaluations Paper versions of the following reprints and preprints are available upon request. Also if you would like to be added to our regular distribution list for upcoming or future preprint mailings, please email us your name and mailing address. Reprints: Reprint - Energy Levels of Light Nuclei, A = 11, Nucl. Phys. A880 (2012) 88. Reprint - Energy Levels of Light Nuclei, A = 3, Nucl. Phys. A848 (2010) 1. Reprint - Energy Levels of Light Nuclei, A = 8, 9,

  20. DI-MGMT-81861 DOE Changes Version | Department of Energy

    Energy Savers [EERE]

    DI-MGMT-81861 DOE Changes Version DI-MGMT-81861 DOE Changes Version PDF icon DI-MGMT-81861 IPMR DOE Version 20140211 Chgs.pdf More Documents & Publications Integrated Program...

  1. Printing a Car: A Team Effort in Innovation (Text Version) |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Printing a Car: A Team Effort in Innovation (Text Version) Printing a Car: A Team Effort in Innovation (Text Version) Below is the text version of the video Printing a Car: A Team ...

  2. IBM Presentation Template Full Version

    U.S. Energy Information Administration (EIA) Indexed Site

    0 IBM Corporation Smart Grid: Impacts on Electric Power Supply and Demand 2010 Energy Conference: Short-Term Stresses, Long-Term Change Michael Valocchi, Global Energy and Utilities Industry Leader, IBM Global Business Services April, 2010 © 2010 IBM Corporation 2 Discussion Topics The Business Model will Evolve The Consumer Value Model will Transform A New Energy Consumer will Emerge Customers Segmentation will be Done in a Different Manner Information and Data Sources will

  3. PVWatts Version 1 Technical Reference

    SciTech Connect (OSTI)

    Dobos, A. P.

    2013-10-01

    The NREL PVWatts(TM) calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes several hidden assumptions about performance parameters. This technical reference details the individual sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimation.

  4. Version Tracking Document for DOE Challenge Homes, National Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03) Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. ...

  5. Exploiting New Features of COMSOL Version 4 on Conjugate Heat...

    Office of Scientific and Technical Information (OSTI)

    Exploiting New Features of COMSOL Version 4 on Conjugate Heat Transfer Problems Citation Details In-Document Search Title: Exploiting New Features of COMSOL Version 4 on Conjugate ...

  6. ENERGY STAR Certified Homes, Version 3 (Rev. 07) Inspection Checklists...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ENERGY STAR Certified Homes, Version 3 (Rev. 07) Inspection Checklists for National Program Requirements ENERGY STAR Certified Homes, Version 3 (Rev. 07) Inspection Checklists for ...

  7. Cyber Security Procurement Language for Control Systems Version...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Procurement Language for Control Systems Version 1.8 Cyber Security Procurement Language for Control Systems Version 1.8 Supervisory Control and Data Acquisition (SCADA), Process ...

  8. Electronic and structural properties at the interface between CuPc and graphene

    SciTech Connect (OSTI)

    Tao, Yongsheng; Mao, Hongying; He, Pimo

    2015-01-07

    The electronic and structural properties at Copper phthalocyanine (CuPc)/graphene have been studied using ultraviolet photoemission spectroscopy and first-principles density function theory calculation. The five emission features ?, ?, ?, ?, and ? originating from the CuPc molecules locate at 1.48, 3.66, 4.98, 6.90, and 9.04?eV, respectively. These features shift in binding energy with the increasing CuPc coverage. The feature ? is mostly deriving from Cu 3d orbital with some contributions from C 2p orbital. Further theoretical calculation indicates that the adsorption of CuPc on a top site is the most favorable configuration, and the separation between the adsorbate and graphene is about 3.47?. According to the density of states before and after CuPc adsorption, the LUMO of CuPc is slightly occupied, while the Dirac point of graphene slightly shift towards higher energy, suggesting that a small amount of electron transfer from graphene to CuPc upon contact.

  9. Acoustics- Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2012-09-13

    This package contains modules that model acoustic sensors and acoustic sources (hearable) in Umbra. It is typically used to represent hearing in characters within Umbra. Typically, the acoustic sensors detect acoustic sources at a given point; however, it also contains the capability to detect bullet cracks by detecting the sound along the bullet path that is closest to the sensor. A memory module, acoustic memory, represents remembered sounds within a given character. Over time, themore » sounds are removed, as a character forgets what it has heard.« less

  10. YAP Version 4.0

    Energy Science and Technology Software Center (OSTI)

    2004-05-20

    The YAP software library computes (1) electromagnetic modes, (2) electrostatic fields, (3) magnetostatic fields and (4) particle trajectories in 2d and 3d models. The code employs finite element methods on unstructured grids of tetrahedral, hexahedral, prism and pyramid elements, with linear through cubic element shapes and basis functions to provide high accuracy. The novel particle tracker is robust, accurate and efficient, even on unstructured grids with discontinuous fields. This software library is a component ofmore » the MICHELLE 3d finite element gun code.« less

  11. SealSim Version 1.1

    Energy Science and Technology Software Center (OSTI)

    2005-05-16

    SealSim 1.1 is a state-of-the-art, Microsoft Windows based computer program developed for the U.S. Department of Energy by Aspen Research Corporation with Contracted support from TNO TPD. It is intended to be used by manufacturers, engineers, educators, students, architects, and others to help determine the relative durability of Insulating Glass Units (IGU). As a function of time, SealSim 1.1 simulates the behaviour of an Insulating Glass Unit, exposed to realistic or user-defined weather climates. Stressesmore » and strains in the IGU are calculated as a function of time, together with temperature distributions, gas permeation effects (gas loss, desiccant loading), dew point temperature, U-factor, etc. The current version of SealSim 1.1 supports double-glazing Units. where the spacer system is either a Thermo Plastic Spacer (TPS) or Box type spacer. For the determination of solar properties of glazing systems, SealSim 1.1 uses the Tntemational Glazing Database of LBNL, which is also used by OPTICS and WINDOW. The goal of the SealSim 1.1 simulations is to predict the IGU’s average lifetime, expressed in terms of the "Durability Index", together with the associated failure mechanisms. The Durability Index of a particular IGU and its most probable failure mechanism can be compared with other IGU’s. How the predicted Durability Index relates to the actual durability of an IGU is not known, simply because sufficient experimental data is lacking for describing the behaviour of IG Units over extended periods of time together with a lack of knowledge of the conditions it is subjected to and initial state of the CU at the time of manufacturing. In order to simulate the IGU behaviour in time, the conditions of the IGU must be defined; together with the weather and or climate that the IGU is subjected to. Using physical models of the IGU, SealSim 1.1 calculates tte response of the CU in time. These physical models are described in more detail in separate documents provided with the SealSim 1.1 program. Though much care was taken to test the correct implementation of physical sub models in SealSim 1.1, make the graphical user interface intuitive, making it robust, and to check all options that are available in SealSim 1.1, it will certainly suffer from the deficiencies of a first release. Aspen Research Corporation 1700 Buerkle Road St Paul, Minnesota 55110« less

  12. Text-Alternative Version: LED Essentials- Technology, Applications, Advantages, Disadvantages

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the LED Essentials - Technology, Applications, Advantages, Disadvantages webcast.

  13. Insider Alert 1.0 Beta Version

    Energy Science and Technology Software Center (OSTI)

    2004-02-01

    Insider Alert 1.0 Beta Version supports interactive selection and graphical display of data generated by the Sandia Cognitive Framework, which simulates the examination of security data by experts of various specialties. Insider Alert also encompasses the configuration and data files input to the Cognitive Framework for this application. Insider Alert 1.0 Beta Version is a computer program for analyzing data indicative of possible espionage or improper handling of data by employees at Sandia National Laboratoriesmore » (or other facilities with comparable policies and procedures for managing sensitive information) It prioritizes and displays information for review by security analysts.« less

  14. Beta.-glucosidase coding sequences and protein from orpinomyces PC-2

    DOE Patents [OSTI]

    Li, Xin-Liang; Ljungdahl, Lars G.; Chen, Huizhong; Ximenes, Eduardo A.

    2001-02-06

    Provided is a novel .beta.-glucosidase from Orpinomyces sp. PC2, nucleotide sequences encoding the mature protein and the precursor protein, and methods for recombinant production of this .beta.-glucosidase.

  15. U-088: Symantec pcAnywhere Bugs Let Remote Users Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    Two vulnerabilities were reported in Symantec pcAnywhere. A remote user can execute arbitrary code on the target system. A local user can obtain elevated privileges on the target system.

  16. Video, Audio, and Animation Text Versions for Web Accessibility |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Videos, Animations, & Audio » Video, Audio, and Animation Text Versions for Web Accessibility Video, Audio, and Animation Text Versions for Web Accessibility For accessibility, Section 508 requires text versions of video, audio, and animations. Follow the Office of Energy Efficiency and Renewable Energy's (EERE's) requirements for developing a text version for a video, audio file, or animation. Requirements Follow these requirements for developing a text version for

  17. Alternative Fuels Data Center: CNG Vehicle Fueling Animation Text Version

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Natural Gas Printable Version Share this resource Send a link to Alternative Fuels Data Center: CNG Vehicle Fueling Animation Text Version to someone by E-mail Share Alternative Fuels Data Center: CNG Vehicle Fueling Animation Text Version on Facebook Tweet about Alternative Fuels Data Center: CNG Vehicle Fueling Animation Text Version on Twitter Bookmark Alternative Fuels Data Center: CNG Vehicle Fueling Animation Text Version on Google Bookmark Alternative Fuels Data Center: CNG Vehicle

  18. Gasoline price shows small increase (Short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    shows small increase (Short version) The U.S. average retail price for regular gasoline rose to $3.32 a gallon on Monday. That's up 1.2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  19. Gasoline price shows small increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Short version) The U.S. average retail price for regular gasoline showed little movement from last week. Prices rose 4/10 of a cent to $3.30 a gallon on Monday, based on the weekly price survey by the U.S. Energy Information Administration.

  20. Gasoline price up this week (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $3.36 a gallon on Monday. That's up 4.2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  1. Gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    (short version) The U.S. average retail price for regular gasoline fell to $3.65 a gallon on Monday. That's down 3 1/2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. This is Amerine Woodyard, with EIA, in Washington.

  2. Gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices continue to decrease (short version) The U.S. average retail price for regular gasoline fell to $3.29 a gallon on Monday. That's down 3-tenths of a penny from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  3. Gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.50 a gallon on Monday. That's down 8.1 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  4. Gasoline prices continue to fall (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    (short version) The U.S. average retail price for regular gasoline fell to $3.54 a gallon on Monday. That's down 6.6 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  5. Gasoline prices continue to fall (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    (short version) The U.S. average retail price for regular gasoline decreased for the second week in a row to $3.71 a gallon on Monday. That's down 4.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. This is Amerine Woodyard, with EIA, in Washington.

  6. Gasoline prices continue to fall (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.70 a gallon on Monday. That's down 1.4 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. This is Amerine Woodyard, with EIA, in Washington.

  7. Gasoline prices continue to fall (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.61 a gallon on Monday. That's down 3.7 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. This is Amerine Woodyard, with EIA, in Washington.

  8. Gasoline prices continue to fall (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.52 a gallon on Monday. That's down 1.6 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  9. Gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices continue to increase (short version) The U.S. average retail price for regular gasoline rose to $3.44 a gallon on Monday. That's up 6.4 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  10. Gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices continue to increase (short version) The U.S. average retail price for regular gasoline rose to $3.48 a gallon on Monday. That's up 3 ½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  11. Gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices continue to increase (short version) The U.S. average retail price for regular gasoline rose to $3.51 a gallon on Monday. That's up 3.3 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  12. Gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices continue to increase (short version) The U.S. average retail price for regular gasoline rose to $3.55 a gallon on Monday. That's up 3½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  13. Gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    4, 2014 Gasoline prices continue to increase (short version) The U.S. average retail price for regular gasoline rose to $3.65 a gallon on Monday. That's up 5½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. This is Amerine Woodyard, with EIA, in Washington.

  14. Gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    1, 2014 Gasoline prices continue to increase (short version) The U.S. average retail price for regular gasoline rose to $3.68 a gallon on Monday. That's up 3.2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. This is Amerine Woodyard, with EIA, in Washington.

  15. Gasoline prices continue to rise (Short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices continue to rise (short version) The U.S. average retail price for regular gasoline rose to $3.67 a gallon on Monday. That's up 7 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  16. Gasoline prices up this week (short version)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    short version) The U.S. average retail price for regular gasoline rose to 3.61 a gallon on Monday. That's up 7.3 cents from a week ago and up 25.4 cents from two weeks ago, based...

  17. DISCOVERY OF A ?250 K BROWN DWARF AT 2 pc FROM THE SUN

    SciTech Connect (OSTI)

    Luhman, K. L.

    2014-05-10

    Through a previous analysis of multi-epoch astrometry from the Wide-field Infrared Survey Explorer (WISE), I identified WISE J085510.83071442.5 as a new high proper motion object. By combining astrometry from WISE and the Spitzer Space Telescope, I have measured a proper motion of 8.1 0.1'' yr{sup 1} and a parallax of 0.454 0.045'' (2.20{sub ?0.20}{sup +0.24} pc) for WISE J085510.83071442.5, giving it the third highest proper motion and the fourth largest parallax of any known star or brown dwarf. It is also the coldest known brown dwarf based on its absolute magnitude at 4.5 ?m and its color in [3.6]-[4.5]. By comparing M {sub 4.5} with the values predicted by theoretical evolutionary models, I estimate an effective temperature of 225-260 K and a mass of 3-10 M {sub Jup} for the age range of 1-10 Gyr that encompasses most nearby stars.

  18. The white dwarfs within 25 pc of the Sun: Kinematics and spectroscopic subtypes

    SciTech Connect (OSTI)

    Sion, Edward M.; McCook, George P.; Wasatonic, Richard; Myszka, Janine; Holberg, J. B.; Oswalt, Terry D. E-mail: george.mccook@villanova.edu E-mail: janine.myszka@villanova.edu E-mail: toswalt@fit.edu

    2014-06-01

    We present the fractional distribution of spectroscopic subtypes, range and distribution of surface temperatures, and kinematical properties of the white dwarfs (WDs) within 25 pc of the Sun. There is no convincing evidence of halo WDs in the total 25 pc sample of 224 WDs. There is also little to suggest the presence of genuine thick disk subcomponent members within 25 pc. It appears that the entire 25 pc sample likely belongs to the thin disk. We also find no significant kinematic differences with respect to spectroscopic subtypes. The total DA to non-DA ratio of the 25 pc sample is 1.8, a manifestation of deepening envelope convection, which transforms DA stars with sufficiently thin H surface layers into non-DAs. We compare this ratio with the results of other studies. We find that at least 11% of the WDs within 25 pc of the Sun (the DAZ and DZ stars) have photospheric metals that likely originate from accretion of circumstellar material (debris disks) around them. If this interpretation is correct, then it suggests the possibility that a similar percentage have planets, asteroid-like bodies, or debris disks orbiting them. Our volume-limited sample reveals a pileup of DC WDs at the well-known cutoff in DQ WDs at T {sub eff} ? 6000 K. Mindful of small number statistics, we speculate on its possible evolutionary significance. We find that the incidence of magnetic WDs in the 25 pc sample is at least 8% in our volume-limited sample, dominated by cool WDs. We derive approximate formation rates of DB and DQ degenerates and present a preliminary test of the evolutionary scenario that all cooling DB stars become DQ WDs via helium convective dredge-up with the diffusion tail of carbon extending upward from their cores.

  19. DOE-2 supplement: Version 2.1E

    SciTech Connect (OSTI)

    Winkelmann, F.C.; Birdsall, B.E.; Buhl, W.F.; Ellington, K.L.; Erdem, A.E.; Hirsch, J.J.; Gates, S.

    1993-11-01

    This publication updates the DOE-2 Supplement form version 2.1D to version to 2.1E. It contains detailed discussions and instructions for using the features and enhancements introduced into the 2.1B, 2.1C, 2.1D, and 2.1E versions of the program. The building description section contains information on input functions in loads and systems, hourly report frequencies, saving files of hourly output for post processing, sharing hourly report data among program modules, the metric option, and input macros and general library features. The loads section contains information on sunspaces, sunspace modeling, window management and solar radiation, daylighting, trombe walls, fixed shades, fins and overhangs, shade schedules, self shades, heat distribution from lights, the Sherman-Grimsrud infiltrations method. terrain and height modification to wind speed, floor multipliers and interior wall types, improved exterior infrared radiation loss calculation, improved outside air film conductance calculation, window library, window frames, and switchable glazing. The systems section contains information on energy end use and meters, powered induction units, a packaged variable volume -- variable temperature system, a residential variable volume -- variable temperature system, air source heat pump enhancements, water loop heat pump enhancements, variable speed electric heat pump, gas heat pumps, hot water heaters, evaporative cooling, total gas solid-desiccant systems, add on desiccant cooling, water cooled condensers, evaporative precoolers outside air economizer control, optimum fan start, heat recovery from refrigerated case work, night ventilation, baseboard heating, moisture balance calculations, a residential natural ventilation algorithm, improved cooling coil model, system sizing and independent cooling and heating sizing ratios. The plant section contains information on energy meters, gas fired absorption chillers, engine driven compressor chillers, and ice energy storage.

  20. Improved version of the PHOBOS Glauber Monte Carlo

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Loizides, C.; Nagle, J.; Steinberg, P.

    2015-09-01

    “Glauber” models are used to calculate geometric quantities in the initial state of heavy ion collisions, such as impact parameter, number of participating nucleons and initial eccentricity. Experimental heavy-ion collaborations, in particular at RHIC and LHC, use Glauber Model calculations for various geometric observables for determination of the collision centrality. In this document, we describe the assumptions inherent to the approach, and provide an updated implementation (v2) of the Monte Carlo based Glauber Model calculation, which originally was used by the PHOBOS collaboration. The main improvement w.r.t. the earlier version (v1) (Alver et al. 2008) is the inclusion of Tritium,more » Helium-3, and Uranium, as well as the treatment of deformed nuclei and Glauber–Gribov fluctuations of the proton in p +A collisions. A users’ guide (updated to reflect changes in v2) is provided for running various calculations.« less

  1. Physics-Based Constraints in the Forward Modeling Analysis of...

    Office of Scientific and Technical Information (OSTI)

    Image Data, (Long Version) Citation Details In-Document Search Title: Physics-Based Constraints in the Forward Modeling Analysis of Time-Correlated Image Data, (Long Version) ...

  2. CREST Cost of Renewable Energy Spreadsheet Tool: A Model for Developing Cost-Based Incentives in the United States; User Manual Version 4, August 2009 - March 2011 (Updated July 2013)

    SciTech Connect (OSTI)

    Gifford, J. S.; Grace, R. C.

    2013-07-01

    The objective of this document is to help model users understand how to use the CREST model to support renewable energy incentives, FITs, and other renewable energy rate-setting processes. This user manual will walk the reader through the spreadsheet tool, including its layout and conventions, offering context on how and why it was created. This user manual will also provide instructions on how to populate the model with inputs that are appropriate for a specific jurisdiction's policymaking objectives and context. Finally, the user manual will describe the results and outline how these results may inform decisions about long-term renewable energy support programs.

  3. Remote facility sharing with ATM networks [PC based ATM Link Delay Simulator (LDS)]. Final report

    SciTech Connect (OSTI)

    Kung, H. T.

    2001-06-01

    The ATM Link Delay Simulator (LDS) adds propagation delay to the ATM link on which it is installed, to allow control of link propagation delay in network protocol experiments simulating an adjustable piece of optical fiber. Our LDS simulates a delay of between 1.5 and 500 milliseconds and is built with commodity PC hardware, only the ATM network interface card is not generally available. Our implementation is special in that it preserves the exact spacing of ATM data cells a feature that requires sustained high performance. Our implementation shows that applications demanding sustained high performance are possible on commodity PC hardware. This illustrates the promise that PC hardware has for adaptability to demanding specialized testing of high speed network.

  4. Tritium Migration Analysis Program Version 4

    Energy Science and Technology Software Center (OSTI)

    1991-06-12

    TMAP4 was developed as a safety analysis code, mainly to analyze tritium retention and loss in fusion reactor structures and systems during normal operational and accident conditions. It incorporates one-dimensional thermal and mass-diffusive transport and trapping calculations through structures and zero dimensional fluid transport between enclosures and across the interface between enclosures and structures. Diffusion structures may be linked together with other structures, and multiple structures may interact with an enclosure. A key feature ismore » the ability to input problem definition parameters as constants, interpolation tables, or FORTRAN equations. The code is specifically intended for use under a DOS operating system on PC type minicomputers, but it has also been run successfully on workstations and mainframe computer systems. Use of the equation-input feature requires access to a FORTRAN-77 compiler, and a linker program is required.« less

  5. Retrofit Financial Analysis Tool, Version 1.1.01

    Broader source: Energy.gov [DOE]

    Download a zip file containing the Retrofit Financial Analysis Tool, Version 1.1.01, and an example version of the Tool filled in with sample data. Save the file to your computer before opening..

  6. Template:PrintFullVersionButton | Open Energy Information

    Open Energy Info (EERE)

    PrintFullVersionButton Jump to: navigation, search This is the PrintFullVersionButton template. It is intended for inclusion on any page where the printing of a superset of pages...

  7. DOE Challenge Home Better Business for Builders Webinar (Text Version)

    Broader source: Energy.gov [DOE]

    Below is a text version of the webinar titled "DOE Challenge Home: Better Business for Builders," originally presented in May 2012. In addition to this text version of the audio, you can access the...

  8. Intel uses very old version of libstdc++ by default [updated...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    node, which is typically quite old. This test case illustrates the problem on Edison: > cat TestLibVersion.C include int main() std::cout<<"libstdc++ version is "<<...

  9. National Residential Efficiency Measures Database Unveiled (text version)

    Broader source: Energy.gov [DOE]

    Below is the text version of the Webinar titled "National Residential Efficiency Measures Database Unveiled," originally presented on January 18, 2011. In addition to this text version of the audio...

  10. Tax Deduction Qualified Software Tas version 9.3.1

    Broader source: Energy.gov [DOE]

    Information about the Tas version 9.3.1 qualified computer software and federal tax incentive requirements for commercial buildings.

  11. Text-Alternative Version: LEDs for Interior Office Applications

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the LEDs for Interior Office Applications webcast, held March 18, 2010.

  12. EECBG Strategies and Considerations Approaching Lenders Webcast (Text Version)

    Broader source: Energy.gov [DOE]

    Below is a text version of the December 3, 2009 What Drives Consumer Borrowing for Energy Efficiency?

  13. Strategic Energy Planning Webinar Text Version | Department of Energy

    Energy Savers [EERE]

    Text Version Strategic Energy Planning Webinar Text Version Download the text version of the audio from the DOE Office of Indian Energy webinar on strategic energy planning. PDF icon DOE Office of Indian Energy Foundational Course on Strategic Energy Planning Audio Version More Documents & Publications Strategic Energy Planning Webinar Presentation Slides 2016 Tribal Energy and Economic Development January Webinar: Energy Planning for Tribal Economic Development Community-Scale Tribal

  14. Text-Alternative Version: Pedestrian-Friendly Nighttime Lighting Webinar

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Pedestrian-Friendly Nighttime Lighting" webcast, held November 19, 2013.

  15. EECLP Webinar #1: Overview and Cost Effectiveness-- Text Version

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar, EECLP Webinar 1: Overview and Cost Effectiveness, presented in December 2014.

  16. Structuring Credit Enhancements for Clean Energy Finance Programs (Text Version)

    Broader source: Energy.gov [DOE]

    Below is a text version of the January 15, 2010 Structuring Loan Loss Reserve Funds for Clean Energy Finance Programs.

  17. Text-Alternative Version: LED Replacements for Linear Fluorescent Lamps

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "LED Replacements for Linear Fluorescent Lamps" webcast, held June 20, 2011.

  18. Text-Alternative Version: Smithsonian GATEWAY Demonstration Video

    Broader source: Energy.gov [DOE]

    Following is a text version of a video about the GATEWAY demonstration project at the Smithsonian American Art Museum.

  19. EECLP Webinar #6: Solar Program Overview-- Text Version

    Broader source: Energy.gov [DOE]

    Below is the text version of the EECLP Webinar 6: Solar Program Overview, presented in January 2015.

  20. Tax Deduction Qualified Software Tas version 9.3.2

    Broader source: Energy.gov [DOE]

    Information about the Tas version 9.3.2 qualified computer software and federal tax incentive requirements for commercial buildings.

  1. Text-Alternative Version: Evaluating LED Street Lighting Solutions

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the Evaluating LED Street Lighting Solutions webcast, held July 20, 2010.

  2. DOE Challenge Home Comprehensive Building Science Webinar (Text Version)

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar, DOE Zero Energy Ready Home - Comprehensive Building Science, presented in March 2014.

  3. OCIO Organization Chart (printable version) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OCIO Organization Chart (printable version) OCIO Organization Chart (printable version) Printable PDF version of the OCIO Organization Chart. PDF icon OCIO Org Chart (as of 4 18 16).pdf More Documents & Publications Office of Energy Efficiency and Renewable Energy Organization Chart IT Modernization Strategy DOE Organization Chart - May 1, 2013

  4. Tax Deduction Qualified Software TRNSYS version 17.01.0016 TESS Libraries version 17.1.01

    Broader source: Energy.gov [DOE]

    provides information about the TRNSYS version 17.01.0016 and TESS Libraries version 17.1.01 qualified computer software, which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  5. MARVEL: A PC-based interactive software package for life-cycle evaluations of hybrid/electric vehicles

    SciTech Connect (OSTI)

    Marr, W.W.; He, J.

    1995-07-01

    As a life-cycle analysis tool, MARVEL has been developed for the evaluation of hybrid/electric vehicle systems. It can identify the optimal combination of battery and heat engine characteristics for different vehicle types and performance requirements, on the basis of either life-cycle cost or fuel efficiency. Battery models that allow trade-offs between specific power and specific energy, between cycle life and depth of discharge, between peak power and depth of discharge, and between other parameters, are included in the software. A parallel hybrid configuration, using an internal combustion engine and a battery as the power sources, can be simulated with a user-specified energy management strategy. The PC-based software package can also be used for cost or fuel efficiency comparisons among conventional, electric, and hybrid vehicles.

  6. PR-EDB: Power Reactor Embrittlement Database - Version 3

    SciTech Connect (OSTI)

    Wang, Jy-An John; Subramani, Ranjit

    2008-03-01

    The aging and degradation of light-water reactor pressure vessels is of particular concern because of their relevance to plant integrity and the magnitude of the expected irradiation embrittlement. The radiation embrittlement of reactor pressure vessel materials depends on many factors, such as neutron fluence, flux, and energy spectrum, irradiation temperature, and preirradiation material history and chemical compositions. These factors must be considered to reliably predict pressure vessel embrittlement and to ensure the safe operation of the reactor. Large amounts of data from surveillance capsules are needed to develop a generally applicable damage prediction model that can be used for industry standards and regulatory guides. Furthermore, the investigations of regulatory issues such as vessel integrity over plant life, vessel failure, and sufficiency of current codes, Standard Review Plans (SRPs), and Guides for license renewal can be greatly expedited by the use of a well-designed computerized database. The Power Reactor Embrittlement Database (PR-EDB) is such a comprehensive collection of data for U.S. designed commercial nuclear reactors. The current version of the PR-EDB lists the test results of 104 heat-affected-zone (HAZ) materials, 115 weld materials, and 141 base materials, including 103 plates, 35 forgings, and 3 correlation monitor materials that were irradiated in 321 capsules from 106 commercial power reactors. The data files are given in dBASE format and can be accessed with any personal computer using the Windows operating system. "User-friendly" utility programs have been written to investigate radiation embrittlement using this database. Utility programs allow the user to retrieve, select and manipulate specific data, display data to the screen or printer, and fit and plot Charpy impact data. The PR-EDB Version 3.0 upgrades Version 2.0. The package was developed based on the Microsoft .NET framework technology and uses Microsoft Access for backend data storage, and Microsoft Excel for plotting graphs. This software package is compatible with Windows (98 or higher) and has been built with a highly versatile user interface. PR-EDB Version 3.0 also contains an "Evaluated Residual File" utility for generating the evaluated processed files used for radiation embrittlement study.

  7. This version is dated: September 2007

    Buildings Energy Data Book [EERE]

    7 D I S C L A I M E R This document was designed for the internal use of the United States Department of Energy. This document will be occasionally updated and, therefore, this copy may not reflect the most current version. This document was prepared as account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or

  8. Network Markup Language Base Schema version 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GFD-R-P.206 NML-WG nml-wg@ogf.org Jeroen van der Ham, UvA (editor) Freek Dijkstra, SURFsara Roman Łapacz, PSNC Jason Zurawski, Internet2 May 2013 Network Markup Language Base Schema version 1 Status of This Document Grid Final Draft (GFD), Proposed Recommendation (R-P). Copyright Notice Copyright c Open Grid Forum (2008-2013). Some Rights Reserved. Distribution is unlim- ited. Abstract This document describes a set of normative schemas which allow the description of computer network topologies.

  9. A multi-threaded version of MCFM

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Campbell, John M.; Ellis, R. Keith; Giele, Walter T.

    2015-06-03

    We report on our findings modifying MCFM using OpenMP to implement multi-threading. By using OpenMP, the modified MCFM will execute on any processor, automatically adjusting to the number of available threads. We then modified the integration routine VEGAS to distribute the event evaluation over the threads, while combining all events at the end of every iteration to optimize the numerical integration. Furthermore, we took special care so that the results of the Monte Carlo integration were independent of the number of threads used, to facilitate the validation of the OpenMP version of MCFM.

  10. Gasoline price shows small increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    long version) The U.S. average retail price for regular gasoline showed little movement from last week. Prices rose 4/10 of a cent to $3.30 a gallon on Monday, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the New England States, at 3.52 a gallon, down 1/10 of a penny from a week ago. Prices were lowest at 2.87 a gallon in the Rocky Mountain States, with the biggest regional price drop at close to 7 cents.

  11. Gasoline price up this week (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    up this week (long version) The U.S. average retail price for regular gasoline rose to $3.32 a gallon on Monday. That's up 1.2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. For the first time since early December pump prices were highest in the West Coast at 3.50 a gallon, up 1.2 cents from a week ago. For the fourth week in a row, prices were lowest in the Rocky Mountain States at 2.88 a gallon, up 1.3 cents.

  12. Gasoline price up this week (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    long version) The U.S. average retail price for regular gasoline rose to $3.36 a gallon on Monday. That's up 4.2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. For the second week in a row, pump prices were highest in the West Coast at 3.55 a gallon, up 4.2 cents from a week ago. Prices were lowest in the Rocky Mountain States at 2.98 a gallon, up 10.1 cents marking the greatest regional increase this week.

  13. Gasoline prices continue to decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    (long version) The U.S. average retail price for regular gasoline fell to $3.65 a gallon on Monday. That's down 3 1/2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 3.95 a gallon, down 1.7 cents from a week ago. Prices were lowest in the Gulf Coast States at 3.48 a gallon, down 2.5 cents. This is Amerine Woodyard, with EIA, in Washington.

  14. Gasoline prices continue to decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    3, 2014 Gasoline prices continue to decrease (long version) The U.S. average retail price for regular gasoline fell to $3.29 a gallon on Monday. That's down 3-tenths of a penny from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast states at 3.49 a gallon, up 6-tenths of a penny from a week ago. Prices were lowest in the Gulf Coast region at 3.08 a gallon, down 9-tenths of a penny. This is Amerine Woodyard, with

  15. Gasoline prices continue to decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    19, 2014 Gasoline prices continue to decrease (long version) The U.S. average retail price for regular gasoline fell to $3.67 a gallon on Monday. That's down 3-tenths of a penny from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast states at 4.02 a gallon, down 7-tenths of a penny from a week ago. Prices were lowest in the Gulf Coast region at 3.44 a gallon, up 2-tenths of a penny.

  16. Gasoline prices continue to decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    long version) The U.S. average retail price for regular gasoline fell to $3.50 a gallon on Monday. That's down 8.1 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 3.89 a gallon, down 5.6 cents from a week ago. Prices were lowest in the Gulf Coast States at 3.31 a gallon, down 6 1/2 cents.

  17. Gasoline prices continue to fall (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices continue to fall (long version) The U.S. average retail price for regular gasoline decreased for the second week in a row to $3.71 a gallon on Monday. That's down 4.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 4.05 a gallon, down 2 cents from a week ago. Prices were lowest in the Rocky Mountain States at 3.47 a gallon, down 7-tenths of a penny

  18. Gasoline prices continue to fall (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices continue to fall (long version) The U.S. average retail price for regular gasoline fell to $3.61 a gallon on Monday. That's down 3.7 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 3.93 a gallon, down 1.7 cents from a week ago. Prices were lowest in the Gulf Coast States at 3.43 a gallon, down 4.6

  19. Gasoline prices continue to fall (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    (long version) The U.S. average retail price for regular gasoline fell to $3.54 a gallon on Monday. That's down 6.6 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 3.89 a gallon, down 4 cents from a week ago. Prices were lowest in the Gulf Coast States at 3.36 a gallon, down 7.1 cents.

  20. Gasoline prices continue to fall (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    long version) The U.S. average retail price for regular gasoline fell to $3.52 a gallon on Monday. That's down 1.6 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 3.80 a gallon, down 3.6 cents from a week ago. Prices were lowest in the Gulf Coast States at 3.30 a gallon, down 2.9 cents.

  1. Gasoline prices continue to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    , 2014 Gasoline prices continue to increase (long version) The U.S. average retail price for regular gasoline rose to $3.48 a gallon on Monday. That's up 3 ½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast states at 3.71 a gallon, up 5.6 cents from a week ago. Prices were lowest in the Gulf Coast region at 3.23 a gallon, up 1.8 cents. This is Marcela Rourk, with EIA, in Washington.

  2. Gasoline prices continue to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    March 10, 2014 Gasoline prices continue to increase (long version) The U.S. average retail price for regular gasoline rose to $3.51 a gallon on Monday. That's up 3.3 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast states at 3.76 a gallon, up 4.7 cents from a week ago. Prices were lowest in the Gulf Coast region at 3.25 a gallon, up 2 ½ cents.

  3. Gasoline prices continue to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    7, 2014 Gasoline prices continue to increase (long version) The U.S. average retail price for regular gasoline rose to $3.55 a gallon on Monday. That's up 3½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast states at 3.81 a gallon, up 5½ cents from a week ago. Prices were lowest in the Gulf Coast region at 3.28 a gallon, up 3.1 cents. This is Marcela Rourk, with EIA, in Washington.

  4. Gasoline prices continue to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    14, 2014 Gasoline prices continue to increase (long version) The U.S. average retail price for regular gasoline rose to $3.65 a gallon on Monday. That's up 5½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast states at 3.98 a gallon, up 9.7 cents from a week ago. Prices were lowest in the Rocky Mountain states at 3.44 a gallon, down 8-tenths of a penny

  5. Gasoline prices continue to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    21, 2014 Gasoline prices continue to increase (long version) The U.S. average retail price for regular gasoline rose to $3.68 a gallon on Monday. That's up 3.2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast states at 4.03 a gallon, up a nickel from a week ago. Prices were lowest in the Rocky Mountain states at 3.45 a gallon, up 8-tenths of a penny

  6. Gasoline prices continue to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    24, 2014 Gasoline prices continue to increase (long version) The U.S. average retail price for regular gasoline rose to $3.44 a gallon on Monday. That's up 6.4 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast states at 3.65 a gallon, up 8 cents from a week ago. Prices were lowest in the Gulf Coast region at 3.21 a gallon, up

  7. Gasoline prices continue to rise (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    Gasoline prices continue to rise (long version) The U.S. average retail price for regular gasoline rose to $3.67 a gallon on Monday. That's up 7 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 3.95 a gallon, up 1.4 cents from a week ago. Prices were lowest in the Gulf Coast States at 3.39 a gallon, up 2.8 cents. The Midwest region boasted the highest weekly increase at 18.8 cents with

  8. A multi-threaded version of MCFM

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Campbell, John M.; Ellis, R. Keith; Giele, Walter T.

    2015-03-20

    We report on our findings modifying MCFM using OpenMP to implement multi-threading. By using OpenMP, the modified MCFM will execute on any processor, automatically adjusting to the number of available threads. We modified the integration routine VEGAS to distribute the event evaluation over the threads, while combining all events at the end of every iteration to optimize the numerical integration. Special care has been taken that the results of the Monte Carlo integration are independent of the number of threads used, to facilitate the validation of the OpenMP version of MCFM.

  9. ALT-3 Target & CMU Version 4

    SciTech Connect (OSTI)

    Griego, Jeffrey R; Atchison, Walter L.; Holtkamp, David; Oro, David M.; Reinovsky, Robert E.; Rousculp, Christopher L.; Tabaka, Leonard J.

    2012-06-11

    The third Advance Liner Technology (ALT-3) experiment is the next in a long tradition of collaborations between LANL and RFNC/VNIIEF in high-explosive pulsed-power. Here a VNIIEF provided Disk Explosive Magnetic Generator (DEMG) will drive a LANL provided experimental load and diagnostic package. The objective of the experiment is to explore the use of a cylindrical liner-ontarget in tera-Pascal equation of state measurement. This presentation will discuss version 4 of the experimental target and central measuring unit (CMU) along with R & D already performed in fabrication of the target.

  10. Utility Rates API Version 2 is Live! | OpenEI Community

    Open Energy Info (EERE)

    utility Utility Companies utility rate Utility Rates version 1 version 2 version 3 web service Smart meter After several months of development and testing, the next...

  11. "EMM Region","PC","IGCC","PC","Conv. CT","Adv. CT","Conv. CC","Adv. CC","Adv. CC w/CCS","Fuel Cell","Nuclear","Biomass","MSW","On-shore Wind","Off-shore Wind","Solar Thermal","Solar PV"

    U.S. Energy Information Administration (EIA) Indexed Site

    Regional cost adjustments for technologies modeled by NEMS by Electric Market Modul (EMM) region 10,11" "EMM Region","PC","IGCC","PC","Conv. CT","Adv. CT","Conv. CC","Adv. CC","Adv. CC w/CCS","Fuel Cell","Nuclear","Biomass","MSW","On-shore Wind","Off-shore Wind","Solar Thermal","Solar PV" ,,,"w/CCS" "1

  12. Correlating High Power Conversion Efficiency of PTB7:PC71BM Inverted Organic Solar Cells with Nanoscale Structures

    SciTech Connect (OSTI)

    Das, Sanjib; Keum, Jong Kahk; Browning, Jim; Gu, Gong; Yang, Bin; Do, Changwoo; Chen, Wei; Chen, Jihua; Ivanov, Ilia N; Hong, Kunlun; Rondinone, Adam J.; Joshi, Pooran C.; Geohegan, David B.; Xiao, Kai

    2015-07-16

    Advances in materials design and device engineering led to inverted organic solar cells (i-OSCs) with superior power conversion efficiencies (PCEs) to their conventional counterparts, in addition to the well-known better ambient stability. Despite the significant progress, however, it has so far been unclear how the morphologies of the photoactive layer and its interface with the cathode modifying layer impact device performance. Here, we report an in-depth morphology study of the i-OSC active and cathode modifying layers, employing a model system with the well-established bulk-heterojunction, PTB7:PC71BM as the active layer and poly-[(9,9-bis(3 -(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) as the cathode surface modifying layer. We have also identified the role of a processing additive, 1,8-diiodooctane (DIO), used in the spin-casting of the active layer to increase PCE. Using a variety of characterization techniques, we demonstrate that the high PCEs of i-OSCs are due to the smearing (diffusion) of electron-accepting PC71BM into the PFN layer, resulting in improved electron transport. The PC71BM diffusion occurs after spin-casting the active layer onto the PFN layer, when residual solvent molecules act as a plasticizer. The DIO additive, with a higher boiling point than the host solvent, has a longer residence time in the spin-cast active layer, resulting in more PC71BM smearing and therefore more efficient electron transport. This work provides important insight and guidance to further enhancement of i-OSC performance by materials and interface engineering.

  13. PC118

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    international standard IEC agreed to work cooperatively with IEEE P2030 on any changes to SEP2 to reach a dual logo IEEE-IEC standard. Pending IEEE acceptance of this proposal. ...

  14. Modifications to the FCHART/SLR version 2. 0 program

    SciTech Connect (OSTI)

    Hill, J. M.

    1981-07-01

    A number of errors have been detected in the FCHART/SLR computer code as it pertains to the thermal performance of passive solar energy systems. Along with minor coding changes, major revisions in the code have been made to improve the computer models used to predict the effects of overhangs on incident solar radiation and the radiation absorbed in attached sunspaces. Modifications to the code were also made to improve the handling of mullions and to reduce the effort required to describe the placement of overhangs. The theoretical basis of these changes, along with the associated alterations to the code, are given. For the cases examined, the program as modified now agrees to within 15% of published LANL passive system performance correlations. This new code has been designated as Version 2.1 and is presently operational at SSEC.

  15. Schedule:DRMAAc, Version 0.8

    Energy Science and Technology Software Center (OSTI)

    2004-04-22

    This Perl module is an implementation of the DRMAA specification. The DRMAA specification is one that makes a common API to distribute jobs via a DRM (Distributed Resource Manager), such as (SGE, LSF, OpenPBS, etc.). The specification is in review stages now (see http://www.drmaa.org) and will be, in my opinion, a defacto standard in a short time. Currently, only SGE has a working interface to the DRMAA, which will be released with version 6.0 ofmore » the product in May of 2004. Other DRM vendors have compliance plans in the works. DRMA does not provide an API for configuring DRMs, just for submitting jobs to them.« less

  16. Buildings GHG Mitigation Estimator Worksheet, Version 1

    Broader source: Energy.gov [DOE]

    Xcel document describes Version 1 of the the Buildings GHG Mitigation Estimator tool. This tool assists federal agencies in estimating the greenhouse gas mitigation reduction from implementing energy efficiency measures across a portfolio of buildings. It is designed to be applied to groups of office buildings, for example, at a program level (regional or site) that can be summarized at the agency level. While the default savings and cost estimates apply to office buildings, users can define their own efficiency measures, costs, and savings estimates for inclusion in the portfolio assessment. More information on user-defined measures can be found in Step 2 of the buildings emission reduction guidance. The output of this tool is a prioritized set of activities that can help the agency to achieve its greenhouse gas reduction targets most cost-effectively.

  17. Current Transportation Models Used in the Vehicle Technologies Program

    SciTech Connect (OSTI)

    2009-04-06

    A summary of various transportation models (VISION, TRUCK, GREET, Oil Peaking Model, Feebate Model, Oil Security Metrics Model, ORNL PHEV Choice Model: Version 1, PSAT, PSAT-PRO,

  18. EOS7C-ECBM Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2012-11-14

    EOS7C is an equation of state module for the TOUGH2 program for CO2 or N2 in Methane (CH4) Reservoirs. In the present work, additions have been made to the EOS7C Version 1.0 module to include the Enhanced Coal Bed Methane (ECBM) modifications developed by Webb (2003). In addition, the Dusty Gas Model for gas-phase diffusion (Webb 2001) has been included. The ECBM modification to the EOS7C equation of state incorporate the extended Langmuir isothem formore » sorbing gases, including the change in porosity associated with the sorbed gas mass. Comparison to hand calculations for pure gas and binary mixture shows very good agreement. Application to a CO2 well injection problem by Law et al. (2002). The Dusty Model modification add options to calculate gas diffusion using the Dusty-Gas Model including separate and coupled approaches. Comparison to low-permeability pure gas diffusion data shows excellent agreement. The results from the DGM are compared to the Fick's Law behavior for diffusion across a capillary fringe. The differences between the models are small due to the relatively high permeability (10-11 m2) of the problem.« less

  19. Small Business Program (Text Version) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small Business Program (Text Version) Small Business Program (Text Version) This is the text version for the images on the EERE Small Business Program page. North American Industry Classification System This pie chart shows the top ten North American Industry Classification System codes used by businesses working with the Department of Energy in September 2015. They are 541611: Administrative Management and General Management Consulting Services: $35,932,769; 541330: Engineering Services:

  20. PGI version 11.3 available on Euclid

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Announcements » PGI version 11.3 available on Euclid PGI version 11.3 available on Euclid March 15, 2011 by Mike Stewart PGI release 11.3 is now available on Euclid. To try it: module swap pgi pgi/11.3. If no problems are reported, this will become the default version in one week (Tues March 22). ===================================== Michael Stewart High Performance Computing Consultant NERSC User Services Group 510-486-6648 pmstewart@lbl.gov ===================================== Subscribe via

  1. Wind Career Map Text Version | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Career Map Text Version Wind Career Map Text Version Below is the text version for the Wind Career Map. The application includes five fields of work-Project Development; Component Manufacturing; Construction; Operations; and Education, Training, and Research. Each section is divided into entry-level, mid-level, and advanced-level jobs, and lists advancement opportunities for each career. All jobs link to the Wind Energy Career Map: Resource List and the Frequently Asked Questions (FAQ). You can

  2. DOE Zero Energy Home Webinar: Comprehensive Building Science (Text Version)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Home Webinar: Comprehensive Building Science (Text Version) DOE Zero Energy Home Webinar: Comprehensive Building Science (Text Version) Below is the text version of the webinar, DOE Zero Energy Ready Home - Comprehensive Building Science, presented in March 2014. Watch the presentation. Lindsay Parker: Hi, everyone. Thanks for joining us for the Department of Energy Challenge Home technical webinar. We'll be starting in a couple minutes. Waiting for people to come on

  3. NREL: Transportation Research - E-Roadway Animation (Text Version)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transportation Research Printable Version E-Roadway Animation (Text Version) This text version of the e-roadway animation describes how electrified roadways can reduce petroleum consumption and vehicle operating costs while extending the range of electric vehicles. Part One: E-Roadway Introduction and Benefits Reducing emissions and oil consumption are crucial worldwide goals. Many technologies can contribute to achieving these goals-efficient homes, biofuels, hybrid electric vehicles, hydrogen

  4. BENEFIT 2015 Funding Opportunity Announcement Webinar 1 (Text Version) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1 (Text Version) BENEFIT 2015 Funding Opportunity Announcement Webinar 1 (Text Version) Below is the text version of the webinar, BENEFIT 2015 Funding Opportunity Announcement, presented in October 2014 by Antonio Bouza, technology manager, and Pat Phelan, program manager, Building Technologies Office. Antonio Bouza: OK. We're going to start the webinar. Can somebody just type in that you're able to hear me, just to give confirmation? Assuming that everybody can hear me.

  5. BENEFIT 2016 Funding Opportunity - Full Applications Webinar (Text Version)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 6 Funding Opportunity - Full Applications Webinar (Text Version) BENEFIT 2016 Funding Opportunity - Full Applications Webinar (Text Version) Here is the text version of the webinar BENEFIT 2016 Funding Opportunity - Full Applications, presented in March 2016. Watch the presentation. Karma Sawyer: Presentation cover slide: Good afternoon, everyone. Welcome to our webinar. Thank-you for your interest in the U.S. Department of Energy's efforts on renewable energy and

  6. BENEFIT Funding Opportunity 2016 Webinar #1 (Text Version) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Funding Opportunity 2016 Webinar #1 (Text Version) BENEFIT Funding Opportunity 2016 Webinar #1 (Text Version) Below is the text version of the BENEFIT Funding Opportunity 2016 Webinar #1, presented in December 2015. Watch the presentation. Karma Sawyer: Presentation cover slide: We are here today for a webinar regarding the 2016 BENEFIT FOA. "BENEFIT" stands for Buildings Energy Efficiency Frontiers and Innovation Technologies. The BENEFIT FOA was released by the Emerging

  7. Better Plants Look Ahead Webinar: Text Version | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance » Better Plants » Better Plants Look Ahead Webinar: Text Version Better Plants Look Ahead Webinar: Text Version Description The Better Plants Program hosted a webinar on January 22, 2015 to review accomplishments to date and detail new initiatives to save partners energy and water. Question and answer session is included. Download presentation slides. Text Version Better Buildings, Better Plants Overview and Look Ahead - January 22, 2015 >> ANDRE DE FONTAINE:

  8. Analysis of the quantum numbers J**PC of the X(3872)

    SciTech Connect (OSTI)

    Abulencia, A.; Adelman, J.; Affolder, T.; Akimoto, T.; Albrow, M.G.; Ambrose, D.; Amerio, S.; Amidei, D.; Anastassov, A.; Anikeev, K.; Annovi, A.; /Taiwan, Inst. Phys. /Argonne /Barcelona, IFAE /Baylor U. /INFN, Bologna /Brandeis U. /UC, Davis /UCLA /UC, San Diego /UC, Santa Barbara /Cantabria Inst. of Phys.

    2006-12-01

    The authors present an analysis of angular distributions and correlations of the X(3872) in the exclusive decay mode X(3872) {yields} J/{psi}{pi}{sup +}{pi}{sup -} with J/{psi} {yields} {mu}{sup +}{mu}{sup -}. They use 780 pb{sup -1} of data from p{bar p} collisions at {radical}s = 1.96 TeV collected with the CDF II detector at the Fermilab Tevatron. They derive constraints on spin, parity, and charge conjugation parity of the X(3872) by comparing measured angular distributions of the decay products with predictions for different J{sup PC} hypotheses. The assignments J{sup PC} = 1{sup ++} and 2{sup -+} are the only ones consistent with the data.

  9. WE-F-16A-01: Commissioning and Clinical Use of PC-ISO for Customized, 3D Printed, Gynecological Brachytherapy Applicators

    SciTech Connect (OSTI)

    Cunha, J; Sethi, R; Mellis, K; Siauw, T; Sudhyadhom, A; Hsu, I; Pouliot, J

    2014-06-15

    Purpose: (1) Evaluate the safety and radiation attenuation properties of PCISO, a bio-compatible, sterilizable 3D printing material by Stratasys, (2) establish a method for commissioning customized multi- and single-use 3D printed applicators, (3) report on use of customized vaginal cylinders used to treat a series of serous endometrial cancer patient. Methods: A custom film dosimetry apparatus was designed to hold a Gafchromic radio film segment between two blocks of PC-ISO and 3D-printed using a Fortus 400mc (StrataSys). A dose plan was computed using 13 dwell positions at 2.5 mm spacing and normalized to 1500 cGy at 1 cm. Film exposure was compared to control tests in only air and only water. The average Hounsfield Unit (HU) was computed and used to verify water equivalency. For the clinical use cases, the physician specifies the dimensions and geometry of a custom applicator from which a CAD model is designed and printed. Results: The doses measured from the PC-ISO Gafchromic film test were within 1% of the dose measured in only water between 1cm and 6cm from the channel. Doses increased 74% measured in only air. HU range was 1143. The applicators were sterilized using the Sterrad system multiple times without damage. As of submission 3 unique cylinders have been designed, printed, and used in the clinic. A standardizable workflow for commissioning custom 3D printed applicators was codified and will be reported. Conclusions: Quality assurance (QA) evaluation of the PC-ISO 3D-printing material showed that PC-ISO is a suitable material for a gynecological brachytherapy vaginal cylinder in a clinical setting. With the material commissioning completed, if the physician determines that a better treatment would Result, a customized design is fabricated with limited additional QA necessary. Although this study was specific to PC-ISO, the same setup can be used to evaluate other 3D-printing materials.

  10. IES version 6.3 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    <Virtual Environment> version 6.3 IES <Virtual Environment> version 6.3 On this page you'll find information about the IES <Virtual Environment> version 6.3 qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. PDF icon qs_iesve_v6_3.pdf More Documents & Publications Tax Deduction Qualified Software TRACE 700 version 6.3.0 Tax Deduction

  11. ARM - Evaluation Product - Microwave Radiometer version 2 (MWRRETv2...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This VAP is an updated version of mwrret1liljclou (documented in Turner et al. 2007) that ... Developed by Laura Riihimaki | Krista Gaustad | David Turner Contact Laura Riihimaki ...

  12. Verification of RESRAD-RDD. (Version 2.01)

    SciTech Connect (OSTI)

    Cheng, Jing-Jy; Flood, Paul E.; LePoire, David; Kamboj, Sunita; Yu, Charley

    2015-09-01

    In this report, the results generated by RESRAD-RDD version 2.01 are compared with those produced by RESRAD-RDD version 1.7 for different scenarios with different sets of input parameters. RESRAD-RDD version 1.7 is spreadsheet-driven, performing calculations with Microsoft Excel spreadsheets. RESRAD-RDD version 2.01 revamped version 1.7 by using command-driven programs designed with Visual Basic.NET to direct calculations with data saved in Microsoft Access database, and re-facing the graphical user interface (GUI) to provide more flexibility and choices in guideline derivation. Because version 1.7 and version 2.01 perform the same calculations, the comparison of their results serves as verification of both versions. The verification covered calculation results for 11 radionuclides included in both versions: Am-241, Cf-252, Cm-244, Co-60, Cs-137, Ir-192, Po-210, Pu-238, Pu-239, Ra-226, and Sr-90. At first, all nuclidespecific data used in both versions were compared to ensure that they are identical. Then generic operational guidelines and measurement-based radiation doses or stay times associated with a specific operational guideline group were calculated with both versions using different sets of input parameters, and the results obtained with the same set of input parameters were compared. A total of 12 sets of input parameters were used for the verification, and the comparison was performed for each operational guideline group, from A to G, sequentially. The verification shows that RESRAD-RDD version 1.7 and RESRAD-RDD version 2.01 generate almost identical results; the slight differences could be attributed to differences in numerical precision with Microsoft Excel and Visual Basic.NET. RESRAD-RDD version 2.01 allows the selection of different units for use in reporting calculation results. The results of SI units were obtained and compared with the base results (in traditional units) used for comparison with version 1.7. The comparison shows that RESRAD-RDD version 2.01 correctly reports calculation results in the unit specified in the GUI.

  13. Text-Alternative Version: Seattle Market Introduction Workshop Video

    Broader source: Energy.gov [DOE]

    Following is a text version of Jim Brodrick's welcome presentation video from the July 2011 DOE SSL Market Introduction Workshop in Seattle, Washington.

  14. Text-Alternative Version: Philadelphia Market Introduction Workshop Video

    Broader source: Energy.gov [DOE]

    Following is a text version of Jim Brodrick's opening presentation video from the July 2010 DOE SSL Market Introduction Workshop in Philadelphia, Pennsylvania.

  15. Tank Monitor and Control System (TMACS) Version Description Document (VDD)

    SciTech Connect (OSTI)

    BARNES, D.A.

    2000-07-06

    This document updates the Version Description Document with the changes incorporated in the Revision 12.0 software installation on the Tank Monitor and Control System (TMACS).

  16. ENERGY STAR Certified Homes, Version 3 (Rev. 07) National Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ENERGY STAR Certified Homes, Version 3 (Rev. 07) National Program Requirements PDF icon energystarv3natprogramrqmntsreV07.pdf More Documents & Publications DOE Zero Energy ...

  17. Indoor airPLUS Construction Specifications Version 1 (Rev. 02...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Indoor airPLUS Construction Specifications Version 1 (Rev. 02), November 2013, from the U.S. Environmental Protection Agency. PDF icon chiap.pdf More Documents & Publications ...

  18. Department of Energy Critical Materials Strategy Video (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the "Department of Energy Critical Materials Strategy" video presented at the Critical Materials Workshop, held on April 3, 2012 in Arlington, Virginia.

  19. ENERGY STAR Certified Homes, Version 3 (Rev. 07) Inspection Checklists...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... the vapor line with good linear thermal contact at the ... ENERGY STAR Certified Homes, Version 3 (Rev. 07) HVAC System ... alternative, a rainwater harvesting system is permitted to ...

  20. Checkpointing in speculative versioning caches (Patent) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    The mechanisms further determine whether a first condition occurs indicating a need to generate a checkpoint in the speculative versioning cache. The checkpoint is a speculative ...

  1. Electricity Grid Basics Webinar Presentation Slides and Text Version

    Broader source: Energy.gov [DOE]

    Download presentation slides and a text version of the audio from the DOE Office of Indian Energy webinar on electricity grid basics.

  2. Text-Alternative Version: Raleigh R&D Workshop Video

    Broader source: Energy.gov [DOE]

    Following is a text version of Jim Brodrick's opening presentation video from the February 2010 DOE SSL R&D Workshop in Raleigh, North Carolina.

  3. Home Energy Score Program Update Webinar (Text Version) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    text version of the webinar titled "Home Energy Score: Program Update for Interested ... who might be interested in becoming a Home Energy Score Partner. OK, so next slide. ...

  4. Accuracy Assessment for Forest and Land Use Maps (English version...

    Open Energy Info (EERE)

    www.leafasia.orglibraryusaid-leaf-accuracy-assessment-forest-and-lan Cost: Free Language: English Accuracy Assessment for Forest and Land Use Maps (English version)...

  5. Fuel Cell Animation- Fuel Cell Stack (Text Version)

    Broader source: Energy.gov [DOE]

    This text version of the fuel cell animation demonstrates how a fuel cell uses hydrogen to produce electricity, with only water and heat as byproducts.

  6. Fuel Cell Animation- Fuel Cell Components (Text Version)

    Broader source: Energy.gov [DOE]

    This text version of the fuel cell animation demonstrates how a fuel cell uses hydrogen to produce electricity, with only water and heat as byproducts.

  7. National Academies Criticality Methodology and Assessment Video (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the "National Academies Criticality Methodology and Assessment" video presented at the Critical Materials Workshop, held on April 3, 2012 in Arlington, Virginia.

  8. Critical Materials Research in DOE Video (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the "Critical Materials Research in DOE" video presented at the Critical Materials Workshop, held on April 3, 2012 in Arlington, Virginia.

  9. CarBen Version 3: Multisector Carbon Dioxide Emissions Accounting...

    Open Energy Info (EERE)

    Name: CarBen Version 3: Multisector Carbon Dioxide Emissions Accounting Tool Focus Area: Geothermal Power Topics: Policy, Deployment, & Program Impact Website: www.netl.doe.gov...

  10. TOWARD A SPECTROSCOPIC CENSUS OF WHITE DWARFS WITHIN 40 pc OF THE SUN

    SciTech Connect (OSTI)

    Limoges, M.-M.; Bergeron, P.; Lepine, S. E-mail: bergeron@astro.umontreal.ca

    2013-05-15

    We present the preliminary results of a survey aimed at significantly increasing the range and completeness of the local census of spectroscopically confirmed white dwarfs. The current census of nearby white dwarfs is reasonably complete only to about 20 pc of the Sun, a volume that includes around 130 white dwarfs, a sample too small for detailed statistical analyses. This census is largely based on follow-up investigations of stars with very large proper motions. We describe here the basis of a method that will lead to a catalog of white dwarfs within 40 pc of the Sun and north of the celestial equator, thus increasing by a factor of eight the extent of the northern sky census. White dwarf candidates are identified from the SUPERBLINK proper motion database, allowing us to investigate stars down to a proper motion limit {mu} > 40 mas yr{sup -1}, while minimizing the kinematic bias for nearby objects. The selection criteria and distance estimates are based on a combination of color-magnitude and reduced proper motion diagrams. Our follow-up spectroscopic observation campaign has so far uncovered 193 new white dwarfs, among which we identify 127 DA (including 9 DA+dM and 4 magnetic), 1 DB, 56 DC, 3 DQ, and 6 DZ stars. We perform a spectroscopic analysis on a subsample of 84 DAs, and provide their atmospheric parameters. In particular, we identify 11 new white dwarfs with spectroscopic distances within 25 pc of the Sun, including five candidates to the D < 20 pc subset.

  11. MACCS version 1.5.11.1: A maintenance release of the code

    SciTech Connect (OSTI)

    Chanin, D.; Foster, J.; Rollstin, J.; Miller, L.

    1993-10-01

    A new version of the MACCS code (version 1.5.11.1) has been developed by Sandia National Laboratories under sponsorship of the US Nuclear Regulatory Commission. MACCS was developed to support evaluations of the off-site consequences from hypothetical severe accidents at commercial power plants. MACCS is the only current public domain code in the US that embodies all of the following modeling capabilities: (1) weather sampling using a year of recorded weather data; (2) mitigative actions such as evacuation, sheltering, relocation, decontamination, and interdiction; (3) economic costs of mitigative actions; (4) cloudshine, groundshine, and inhalation pathways as well as food and water ingestion; (5) calculation of both individual and societal doses to various organs; and (6) calculation of both acute (nonstochastic) and latent (stochastic) health effects and risks of health effects. All of the consequence measures may be fun generated in the form of a complementary cumulative distribution function (CCDF). The current version implements a revised cancer model consistent with recent reports such as BEIR V and ICRP 60. In addition, a number of error corrections and portability enhancements have been implemented. This report describes only the changes made in creating the new version. Users of the code will need to obtain the code`s original documentation, NUREG/CR-4691.

  12. Extraction Utility Design Specification - Version 1.9 | Department of

    Energy Savers [EERE]

    Energy Extraction Utility Design Specification - Version 1.9 Extraction Utility Design Specification - Version 1.9 PDF icon DEC1387487110111_Design_Spec_Dekker_PMIS_Extraction_Utility_v8_0_20101217.pdf More Documents & Publications Dekker PMIS Extraction Utility Dekker PMIS Extraction Utility Release_Notes_V8.0.20110608

  13. Raptor: An Enterprise Knowledge Discovery Engine Version 2.0

    Energy Science and Technology Software Center (OSTI)

    2011-08-31

    The Raptor Version 2.0 computer code uses a set of documents as seed documents to recommend documents of interest from a large, target set of documents. The computer code provides results that show the recommended documents with the highest similarity to the seed documents. Version 2.0 was specifically developed to work with SharePoint 2007 and MS SQL server.

  14. Reference guide to WPP version 2.0

    SciTech Connect (OSTI)

    Petersson, A; Sjogreen, B

    2010-01-22

    WPP is a computer program for simulating seismic wave propagation on parallel machines. WPP solves the governing equations in second order formulation using a node-based finite difference approach. The basic numerical method is described in [9]. WPP implements substantial capabilities for 3-D seismic modeling, with a free surface condition on the top boundary, non-reflecting far-field boundary conditions on the other boundaries, point force and point moment tensor source terms with many predefined time dependencies, fully 3-D heterogeneous material model specification, output of synthetic seismograms in the SAC [4] format, output of GMT [11] scripts for laying out simulation information on a map, and output of 2-D slices of (derived quantites of) the solution field as well as the material model. Version 2.0 of WPP allows the free surface boundary condition to be imposed on a curved topography. For this purpose a curvilinear mesh is used near the free surface, extending into the computational domain down to a user specified level. The elastic wave equations and the free surface boundary conditions are discretized on the curvilinear mesh using the energy conserving technique described in [2]. A curvilinear mesh generator is built into WPP and the curvilinear mesh is automatically generated from the topography. Below the curvilinear grid, the elastic wave equation is discretized on Cartesian meshes, which leads to a more computationally efficient algorithm. In version 2.0 of WPP, Cartesian local mesh refinement can be used to make the computational mesh finer near the free surface, where more resolution often is needed to resolve short wave lenghts in the solution, for example in sedimentary basins. The mesh refinement is performed in the vertical direction and each Cartesian grid is constructed from user specified refinement levels. In this approach, the grid size in all three spatial directions is doubled across each mesh refinement interface, leading to substantial savings in memory and computational effort. The energy conserving mesh refinement coupling method described in [10] is used to handle the hanging nodes along the refinement interface. The examples subdirectory of the WPP source distribution contains several examples and validation tests. Many Matlab/octave scripts are provided in the tools directory.

  15. Benchmarked analyses of neutron and secondary gamma rays for a spent-fuel shipping cask using MORSE-CGA-PC and the DABL69 cross sections

    SciTech Connect (OSTI)

    Golshani, M.; Reichert, P.T. )

    1992-01-01

    The potential neutron radiation dose rates around a spent-fuel shipping cask are a fundamental consideration for the design of such a cask. Neutron radiation from spent fuel is predominantly from decay of {sup 242}Cm and{sup 244}Cm. Secondary gamma can be produced during neutron transport. The combination of the MORSE-SGC computer program and a 32-neutron-group, 18-gamma-group, P5 library derived from ENDF/B-IV could reasonably predict the neutron transport and secondary gamma production and transport, based on actual experimental data. The experimental cask was designed to contain three pressurized water reactor (PWR) or seven boiling water reactor fuel assemblies. The neutron source employed in the experiment was {sup 252}Cf, whose spectrum is similar to the fission spectrum expected from PWR spent fuel. This paper discusses analyses of the same experimental data using the MORSE-CGA program, the DABL69 cross-section set, and a surface crossing estimator. The DLC-130/DABL69 cross-section was employed as the most suitable, readily available, broad-group library. The DABL69 contains 46-neutron and 23-gamma-ray energy groups and the Legendre expansion coefficient for angular distribution is 5(P5). Furthermore, this analysis was done using a personal computer (PC) version of MORSE-CGA, with runs taken to the point of reducing fractional standard deviations to 10% or less. The purpose of this paper is to compare calculated radiation dose rate with available measured data.

  16. New automated inventory/material accounting system (AIMAS) version for former Soviet Union countries

    SciTech Connect (OSTI)

    Kuzminski, Jozef; Ewing, Tom; Sakunov, Igor; Drapey, Sergey; Nations, Jim

    2009-01-01

    AIMAS (Automated Inventory/Material Accounting System) is a PC-based application for site-level nuclear material accountancy that was originally developed in the late 90's as a part of the U.S Department of Energy Assistance Program to Ukraine. Designed to be flexible and secure, plus place minimal demands on computing infrastructure, it was originally developed to run in early Windows operating system (OS) environments like W98 and W3.1. The development, support, and maintenance of AIMAS were transferred to Ukraine in 2002. Because it is highly flexible and can be configured to meet diverse end-user's needs, the software has been used at several facilities in Ukraine. Incorporating added functionality is planned to support nuclear installations in the Republic of Kazakhstan and Uzbekistan, as well. An improved 32-bit version of AIMAS has recently been developed to operate effectively on modern PCs running the latest Windows OS by AVIS, the Ukrainian developer. In the paper we discuss the status of AIMAS, plans for new functions, and describe the strategy for addressing a sustainable software life-cycle while meeting user requirements in multiple FSU countries.

  17. ZFITTER: A Semi-analytical program for fermion pair production in e+ e- annihilation, from version 6.21 to version 6.42

    SciTech Connect (OSTI)

    Arbuzov, A.B.; Awramik, M.; Czakon, M.; Freitas, A.; Grunewald, M.W.; Monig, K.; Riemann, S.; Riemann, T.; /Dubna, JINR /DESY, Zeuthen /Cracow, INP /Wurzburg U. /Silesia U. /Fermilab /University Coll., Dublin

    2005-07-01

    ZFITTER is a Fortran program for the calculation of fermion pair production and radiative corrections at high energy e{sup +}e{sup -} colliders; it is also suitable for other applications where electroweak radiative corrections appear. ZFITTER is based on a semi-analytical approach to the calculation of radiative corrections in the Standard Model. They present a summary of new features of the ZFITTER program version 6.42 compared to version 6.21. The most important additions are: (1) some higher-order QED corrections to fermion pair production, (2) electroweak one-loop corrections to atomic parity violation, (3) electroweak one-loop corrections to {bar {nu}}{sub e}{nu}{sub e} production, (4) electroweak two-loop corrections to the W boson mass and the effective weak mixing angle.

  18. Web/Fact Sheet Version 1

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    These include: OPPORTUNITIES TO PARTICIPATE How can the Department ensure that the process for selecting a site is fair? What models and experience should the Department use in ...

  19. Users guide for ENVSTD program Version 2. 0 and LTGSTD program Version 2. 0

    SciTech Connect (OSTI)

    Crawley, D.B.; Riesen, P.K.; Briggs, R.S.

    1989-02-01

    On January 30, 1989, the US Department of Energy (DOE) promulgated 10 CFR Part 435, Subpart A, an Interim Rule entitled ''Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings.'' As a consequence, federal agencies must design all future federal commercial and multifamily high rise residential buildings in accordance with the Standards, or show that their current standards already meet or exceed the energy-efficiency requirements of the Standards. Although these newly enacted Standards do not regulate the design of nonfederal buildings, DOE recommends that all design professionals use the Standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the Standards were presented in the January 30, 1989, Federal Register in the format typical of commercial standards rather than a federal regulation. As a further help, DOE supported the development of various microcomputer programs to ease the use of the Standards. Two of these programs/emdash/ENVSTD (Version 2.0) and LTGSTD (Version 2.0)/emdash/are detailed in this users guide and provided on the accompanying diskette. This package, developed by Pacific Northwest Laboratory (PNL), is intended to facilitate the designer's use of the Standards dealing specifically with a building's envelope and lighting system designs. Using these programs will greatly simplify the designer's task of performing the sometimes complex calculations needed to determine a design's compliance with the Standards. 3 refs., 6 figs.

  20. High Level Architecture - Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2014-05-13

    This package enables an Umbra simulation to join an HLA federation to co-simulate with other simulations such as another Umbra instance and OpNet. This enables higher fidelity models to be incorporated into an Umbra simulation. This also enables existing simulations/models to be integrated into Umbra without the need of writing the code specifically for Umbra.

  1. Unmanned Air Vehicle -Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2013-04-17

    This package contains modules that model the mobility of systems such as helicopters and fixed wing flying in the air. This package currently models first order physics - basically a velocity integrator. UAV mobility uses an internal clock to maintain stable, high-fidelity simulations over large time steps This package depends on interface that reside in the Mobility package.

  2. WickSolve Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2011-09-27

    WickSolve is a code used to design wick structures for sodium heat pipe receivers for dish Stirling systems. WickSolve can model distributed pore size wicks in domes and cylinders, and interfaces with CIRCE2, another Sandia code, to determine flux boundary conditions to the wick. WickSolve is available as an executable for Windows computer systems. Wicksolve is used for design of wick structures for high temperature sodium heat pipes for solar applications. These wick structures maymore » contain a distribution of pore sizes (felt metal, sintered metal powders, etc) to enhance heat transfer by allowing partial wick dryout. WickSolve incorporates a 2-D liquid flow model (finite differencing) to model in-plane liquid flow, and a 1-D vapor flow finite difference model for vapor flow perpendicular to the liquid flow surface. The models are coupled by the liquid void fraction in the wick, and solved iteratively.« less

  3. From binaries to multiples. I. Data on F and G dwarfs within 67 pc of the Sun

    SciTech Connect (OSTI)

    Tokovinin, Andrei

    2014-04-01

    Data on the multiplicity of F- and G-type dwarf stars within 67 pc of the Sun are presented. This distance-limited sample based on the Hipparcos catalog contains 4847 primary stars (targets) with 0.5 < V I{sub C} < 0.8 and is >90% complete. There are 2196 known stellar pairs; some of them belong to 361 hierarchical systems from triples to quintuples. Models of companion detection by radial velocity, astrometric acceleration, direct resolution, and common proper motion are developed. They serve to compute completeness for each target, using the information on its coverage collected here. About 80% of companions to the primary stars are detected, but the census of subsystems in the secondary components is only about 30%. Masses of binary components are estimated from their absolute magnitudes or by other methods; the periods of wide pairs are evaluated from their projected separations. A third of binaries with periods shorter than ?100 yr are spectroscopic and/or astrometric pairs with yet unknown periods and mass ratios. These data are used in the accompanying Paper II to derive unbiased statistics of hierarchical multiple systems.

  4. Intel uses very old version of libstdc++ by default [updated]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    uses very old version of libstdc++ by default [updated] Intel uses very old version of libstdc++ by default [updated] January 15, 2014 by Mike Stewart, NERSC USG Status: Reported to Cray as case 84319, became bug 806610. Updated October 13, 2014 by Scott French, NERSC USG When PrgEnv-intel is loaded, the Intel compiler gets libstdc++ from on the default environment on the login node, which is typically quite old. This test case illustrates the problem on Edison: > cat TestLibVersion.C

  5. Biomass 2013: Register Now (Text Version) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Register Now (Text Version) Biomass 2013: Register Now (Text Version) Below is the text version for the Biomass 2013: Register Now video. The Video opens with "U.S. Department of Energy Biomass 2013." The Biomass 2013 graphic is shown onscreen. Music with an opening video montage plays. A video of Chris Coons speaking at Biomass 2012 begins. The next phase of biofuels is ready to leap from the lab bench to the marketplace... Video shows pictures of Biomass 2012 conference. Text shows

  6. Fuel Cell Animation (Text Version) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Multimedia » Fuel Cell Animation (Text Version) Fuel Cell Animation (Text Version) This text version of the fuel cell animation demonstrates how a fuel cell uses hydrogen to produce electricity, with only water and heat as byproducts. Fuel cell shown with its inputs and outputs. Hydrogen input on left, oxygen input on right, water and heat outputs on the back, with an electrical circuit going around the top. A fuel cell is a device that uses hydrogen (or hydrogen-rich

  7. BENEFIT 2015 Funding Opportunity Announcement Webinar 2 (Text Version) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 2 (Text Version) BENEFIT 2015 Funding Opportunity Announcement Webinar 2 (Text Version) Below is the text version of the webinar, BENEFIT 2015 Funding Opportunity Announcement 2, presented in October 2014 by Antonio Bouza and Jim Payne of the Building Technologies Office. Presenters talking. Antonio Bouza: I'll give everybody one minute, since we have 21 people. Hello, all. This is Antonio M. Bouza from the U.S. Department of Energy. We're going to wait one minute just

  8. BEopt Version 2.0: New Features | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BEopt Version 2.0: New Features BEopt Version 2.0: New Features This document outlines the new features and capabilities of BEopt Version 2.0, a software that provides capabilities to evaluate residential building designs and identify cost-optimal efficiency packages at various levels of whole-house energy savings along the path to zero net energy. PDF icon beopt_2-0_features.pdf More Documents & Publications Analysis: Targeting Zero Net Energy - 2014 BTO Peer Review Advanced Technical

  9. Feature Based Measuring, Version 2.1

    Energy Science and Technology Software Center (OSTI)

    2002-07-22

    A model-based tool that uses Measurement Features for generating measurement plans that facilitate DMIS compliant CMM Measurement part programs for both manufacturing verification and/or product acceptance.

  10. Special population planner, version 4.0.

    SciTech Connect (OSTI)

    Kuiper, J.; Tanzman, E.; Metz, W.

    2007-03-26

    Emergencies happen every day. Many are caused by storms or auto accidents and can be planned for, if not predicted. Emergencies resulting from natural hazards often affect a large number of people, and planning for them can be difficult, since knowledge of the needs of the people involved is generally unavailable. Emergencies resulting from accidents at industrial and military facilities can also be large scale in nature if people must be evacuated or sheltered in place. Federal planning for large scale emergencies is the responsibility of the Federal Emergency Management Agency (FEMA), which provides assistance to various emergency management agencies at the national, state and local level. More information about FEMA is available at http://www.fema.gov/. The purpose of the Special Population Planner (SPP) is to help emergency planners address the needs of persons with special needs. The exact definition of 'special population' is a policy decision. Policymakers have included a variety of groups in this term, such as persons with disabilities, those who do not have vehicles with which to evacuate, children who are unattended at times (latchkey children), and many others. The SPP was developed initially for the Alabama Emergency Management Agency as part of its Chemical Stockpile Emergency Preparedness Program (CSEPP), which aids emergency planning and preparedness in communities surrounding military installations across the United States where chemical weapons are stored pending their destruction under federal law. Like that specialized application, this open-source version contains a set of specialized Geographic Information System (GIS) tools to facilitate emergency planning on behalf of persons with special needs, regardless of how the term is defined. While the original SPP system was developed for emergency planning relating to chemical hazards, it can be applied to other threats as well. It is apparent from Hurricane Katrina and other natural and man-made disasters that many of the problems posed by emergency planning for a chemical weapons agent release are shared by other hazards as well. The notion that emergency planning shares common functions underlies the decision by FEMA to include the Chemical Stockpile Emergency Preparedness Program (CSEPP) in its 'all-hazards' planning approach. The CSEPP's official planning guidance operationalizes this approach by suggesting that state and local CSEPP emergency plans 'should be appended to the existing all-hazards emergency plan.' The SPP is programmed as a set of tools within an ESRI ArcMap 9.1 project. ArcMap is a component of both ESRI ArcGIS 9.1 and ESRI ArcView 9.1, and it provides a rich GIS user interface for viewing spatial and tabular data, analyzing it, and producing output reports and maps. This GIS interface has been augmented with the SPP tools for a user interface that provides custom functionality for emergency planning. The system as released also includes some hypothetical example records for special needs populations, facilities, resources, control points and sirens sufficient for showing how the system would work with real information. A GIS database is included with some publicly available example layers. The SPP is designed to support emergency planners as they address emergency management issues, and includes capabilities that support the collection and importing of data, the review of data in a spatial context, and GIS tools for emergency planning. The SPP system allows for the identification and categorization of response zones to allow for multiple levels of preparedness. An Immediate Response Zone (IRZ) might be designated as the area 0 to 10 miles from a facility where the response would be the most urgent. SPP can support more than one set of planning zones to accommodate different types of emergencies or the different jurisdictions of emergency response organizations. These areas can be delineated by any number of criteria that make sense for the area. An area like New Orleans might designate response zones based on the depth above/below s

  11. U.S. gasoline prices unchanged (short version)

    Gasoline and Diesel Fuel Update (EIA)

    (short version) The U.S. average retail price for regular gasoline fell for the 5 th week in a row to 3.52 a gallon on Monday. That's down 2.4 cents from a week ago and...

  12. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    continue to increase (short version) The U.S. average retail price for regular gasoline rose to 2.74 a gallon on Monday. That's up 5.3 cents from a week ago, based on the weekly...

  13. U.S. gasoline prices increase slightly (short version)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    short version) The U.S. average retail price for regular gasoline rose slightly to 3.55 a gallon on Monday. That's up 2-tenths of a penny from a week ago, based on the weekly...

  14. U.S. gasoline prices continue to increase (short version)

    Gasoline and Diesel Fuel Update (EIA)

    continue to increase (short version) The U.S. average retail price for regular gasoline rose to 2.49 a gallon on Monday. That's up 1.4 cents from a week ago, based on the weekly...

  15. U.S. gasoline prices increase slightly (short version)

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    short version) The U.S. average retail price for regular gasoline rose slightly to 3.36 a gallon on Monday. That's up 6-tenths of a penny from a week ago, based on the weekly...

  16. U.S. gasoline prices continue to increase (short version)

    Gasoline and Diesel Fuel Update (EIA)

    short version) The U.S. average retail price for regular gasoline rose to 3.68 a gallon on Monday. That's up 4 12 cents from a week ago, based on the weekly price survey by the...

  17. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to 3.61 a gallon on Labor Day Monday. That's up 5.6 cents from a week ago, based on the weekly price survey...

  18. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    continue to increase (short version) The U.S. average retail price for regular gasoline rose to 2.77 a gallon on Memorial Day Monday. That's up 3 cents from a week ago, based on...

  19. U.S. gasoline prices continue to increase (short version)

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    continue to increase (short version) The U.S. average retail price for regular gasoline rose to 2.69 a gallon on Monday. That's up 2.7 cents from a week ago, based on the weekly...

  20. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    increase (short version) The U.S. average retail price for regular gasoline rose to 2.66 a gallon on Monday. That's up 9.4 cents from a week ago, based on the weekly price survey...

  1. U.S. gasoline prices increase (short version)

    Gasoline and Diesel Fuel Update (EIA)

    short version) The U.S. average retail price for regular gasoline rose to 2.03 a gallon on Monday. That's up 8- tenths of a penny from a week ago, based on the weekly price survey...

  2. U.S. gasoline prices continue to increase (short version)

    Gasoline and Diesel Fuel Update (EIA)

    short version) The U.S. average retail price for regular gasoline rose to 3.29 a gallon on Monday. That's up 7.4 cents from a week ago, based on the weekly price survey by the...

  3. U.S. gasoline continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    continue to increase (short version) The U.S. average retail price for regular gasoline rose to 3.33 a gallon on Monday. That's up 6 cents from a week ago, based on the weekly...

  4. U.S. gasoline prices continue to increase (short version)

    Gasoline and Diesel Fuel Update (EIA)

    continue to increase (short version) The U.S. average retail price for regular gasoline rose to 2.78 a gallon on Monday. That's up 6- tenths of a penny from a week ago, based on...

  5. U.S. gasoline continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    continue to increase (short version) The U.S. average retail price for regular gasoline rose to 3.33 a gallon on Monday. That's up 1- tenth of a penny from a week ago, based on...

  6. U.S. Gasoline prices continue increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    continue to increase (short version) The U.S. average retail price for regular gasoline rose to 3.69 a gallon on Monday. That's up 1.6 cents from a week ago, based on the weekly...

  7. U.S. gasoline prices decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    April 6, 2015 U.S. gasoline prices decrease (long version) The U.S. average retail price ... Pump prices were highest in the West Coast states at 2.95 a gallon, down 4.6 cents from a ...

  8. U.S. gasoline prices continue to decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    , 2014 U.S. gasoline prices continue to decrease (long version) The U.S. average retail ... Pump prices were highest in the West Coast states at 3.02 a gallon, down 3.2 cents from a ...

  9. U.S. gasoline prices show little movement (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    30, 2014 U.S. gasoline prices show little movement (long version) The U.S. average retail ... Pump prices were highest in the West Coast states at 4.04 a gallon, up 2 cents from a ...

  10. U.S. gasoline prices continue to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    9, 2015 U.S. gasoline prices continue to increase (long version) The U.S. average retail ... Pump prices were highest in the West Coast states at 3.18 a gallon, up 5.2 cents from a ...

  11. U.S. gasoline prices continue to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    26, 2015 U.S. gasoline prices continue to increase (long version) The U.S. average retail ... Pump prices were highest in the West Coast states at 3.49 a gallon, down 2.6 cents from a ...

  12. U.S. gasoline prices continue to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    June 1, 2015 U.S. gasoline prices continue to increase (long version) The U.S. average ... Pump prices were highest in the West Coast states at 3.44 a gallon, down 4.3 cents from a ...

  13. U.S. gasoline prices show little movement (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    1, 2014 U.S. gasoline prices decrease for third week in a row (long version) The U.S. ... This marks the first time since early April that prices have dipped below 3.60, based on ...

  14. U.S. gasoline prices decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    0, 2015 U.S. gasoline prices decrease (long version) The U.S. average retail price for ... Pump prices were highest in the West Coast states at 3 a gallon, down 4.7 cents from a ...

  15. U.S. gasoline prices continue to decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    1, 2014 U.S. gasoline prices continue to decrease (long version) The U.S. average retail ... Pump prices were highest in the West Coast states at 3.87 a gallon, down 2.1 cents from a ...

  16. U.S. gasoline prices show little movement (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    August 4, 2014 U.S. gasoline prices decrease for fifth week in a row (long version) The ... Pump prices were highest in the West Coast states at 3.89 a gallon, down 3.1 cents from a ...

  17. U.S. gasoline prices continue to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    8, 2015 U.S. gasoline prices continue to increase (long version) The U.S. average retail ... Pump prices were highest in the West Coast states at 3.51 a gallon, up 6.9 cents from a ...

  18. U.S. gasoline prices decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    4, 2014 U.S. gasoline prices decrease (long version) The U.S. average retail price for ... Pump prices were highest in the West Coast states at 4 a gallon, down 3.6 cents from a ...

  19. U.S. gasoline prices continued to decreased (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    6, 2013 U.S. gasoline prices continued to decreased (long version) The U.S. average retail ... Pump prices were highest in the New England region at 3.51 a gallon, up 1.4 cents from a ...

  20. U.S. gasoline prices decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    6, 2014 U.S. gasoline prices decrease (long version) The U.S. average retail price for ... Pump prices were highest in the West Coast states at 3.61 a gallon, down 3 cents from a ...

  1. U.S. gasoline prices show little movement (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    7, 2014 U.S. gasoline prices decrease (long version) The U.S. average retail price for ... Pump prices were highest in the West Coast states at 4.04 a gallon, up a tenth of a penny ...

  2. U.S. gasoline prices decrease (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    September 8, 2014 U.S. gasoline prices decrease (long version) The U.S. average retail ... Pump prices were highest in the West Coast states at 3.77 a gallon, down 2.3 cents from a ...

  3. U.S. Gasoline prices continue to decrease (Long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    , 2014 U.S. Gasoline prices continue to increase (long version) The U.S. average retail ... Pump prices were highest in the West Coast states at 4.01 a gallon, up 3-tenths of a penny ...

  4. Home Energy Score Pilot Analysis Webinar (Text Version) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    text version of the webinar titled "Home Energy Score: Analysis and Improvements to ... up with when we put together the Home Energy Score program and we look back at these ...

  5. U.S. gasoline price falls under $3 (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    November 3, 2014 U.S. gasoline price falls under 3 (long version) The U.S. average retail price for regular gasoline fell to its lowest level since December 2010 at 2.99 a gallon ...

  6. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    long version) The U.S. average retail price for regular gasoline fell to its lowest level since April 2009 to 2.04 a gallon on Monday. That's down 1.6 cents from a week ago, based ...

  7. U.S. gasoline prices decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    decrease (short version) The U.S. average retail price for regular gasoline fell to its lowest level of the year at 3.21 a gallon on Monday. That's down 9.2 cents from a week ...

  8. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to its lowest level since April 2009 to 2.04 a gallon on Monday. That's down 1.6 cents from a week ago, ...

  9. Gasoline prices fall for first time this year (short version...

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell for the first time this year to 3.76 a gallon on Monday. That's down 2 12 cents from a week ago, based on ...

  10. Gasoline prices fall for first time this year (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    long version) The U.S. average retail price for regular gasoline fell for the first time this year to 3.76 a gallon on Monday. That's down 2 12 cents from a week ago, based on ...

  11. Video, Audio, and Animation Text Versions for Web Accessibility...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a text version and understand all of the major themes and messages in a multimedia file. ... visitors who find the page through a search engine to find the original multimedia file. ...

  12. Tax Deduction Qualified Software: TRACE Version 6.3.2

    Broader source: Energy.gov [DOE]

    Provides required documentation that the TRACE version 6.3.2 meets Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements.

  13. Text-Alternative Version: Understanding and Evaluating LM-79 Reports

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of Day 1 of the three-part TINSSL Webinar Series "Understanding and Evaluating LM-79 & LM-80 Reports for SSL Technology," held August 10, 2010.

  14. EV Everywhere: Text Version of Share Your EV Story Video

    Broader source: Energy.gov [DOE]

    This is a text version of the Share Your EV Story video, which features interviews with drivers of electric vehicles who work at the Department of Energy and its national laboratories sharing their experiences.

  15. NREL: Learning - National Wind Technology Center Video (Text Version)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Wind Technology Center Video (Text Version) This is the text version for the National Wind Technology Center video. The video opens with spinning blades of wind turbines and the National Renewable Energy Laboratory logo. It then cuts to images of windmills turning on farms. The video cuts in between shots of wind turbines and face-to-face interviews of scientists from NREL's National Wind Technology Center. (Voiceover) It is a pure, plentiful natural resource. Jim Johnson, Senior

  16. ENERGY STAR Certified Homes, Version 3 (Rev. 07) National Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Requirements | Department of Energy National Program Requirements ENERGY STAR Certified Homes, Version 3 (Rev. 07) National Program Requirements ENERGY STAR Certified Homes, Version 3 (Rev. 07) National Program Requirements PDF icon energy_star_v3_nat_program_rqmnts_reV07.pdf More Documents & Publications DOE Zero Energy Ready Home National Program Requirements (Rev. 05) DOE Zero Energy Ready Home National Program Requirements (Rev. 04) California DOE ZERH Program Requiremets

  17. Volttron version 3.x () | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Software: Volttron version 3.x Citation Details Software Request Title: Volttron version 3.x VOLTTRON™ is an agent execution platform providing services to its agents that allow them to easily communicate with physical devices and other resources. VOLTTRON™ delivers an innovative distributed control and sensing software platform that supports modern control strategies, including agent-based and transaction-based controls. It enables mobile and stationary software agents to perform information

  18. Tax Deduction Qualified Software: EnergyPlus version 5.0.0.031...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software: EnergyPlus version 5.0.0.031 Tax Deduction Qualified Software: EnergyPlus version 5.0.0.031 Provides required documentation that EnergyPlus version 5.0.0.031 meets ...

  19. Residential Lighting Usage Estimate Tool, v1.0, Windows version...

    Energy Savers [EERE]

    Windows version Residential Lighting Usage Estimate Tool, v1.0, Windows version Windows version of the Residential Lighting Usage Estimate Tool, v1.0. Spreadsheet More Documents &...

  20. Residential Lighting Usage Estimate Tool, v1.0, MacOS version...

    Energy Savers [EERE]

    MacOS version Residential Lighting Usage Estimate Tool, v1.0, MacOS version MacOS version of the Residential Lighting Usage Estimate Tool, v1.0. Spreadsheet More Documents &...

  1. Cam Cal - Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2011-01-14

    The camcal package provides camera calibration utilities and C++ drivers to support visual targeting within the Umbra framework. The camera calibration model combines a 4-parameter distortion model, an intrinsic matrix and an extrinsic matrix representation. A table look up allows all of these matrices to be updated based upon a "zoom" parameter which moves between 0 (full -wide) and 1(full-zoom). The software includes a TclfTk Gui tool for calibrating zoom cameras, camera functions for implementingmore » the active sketch visual targeting paradigm, and a SoS (System of System) class that wraps up this functionality.« less

  2. Tandem Mirror Reactor Systems Code (Version I)

    SciTech Connect (OSTI)

    Reid, R.L.; Finn, P.A.; Gohar, M.Y.; Barrett, R.J.; Gorker, G.E.; Spampinaton, P.T.; Bulmer, R.H.; Dorn, D.W.; Perkins, L.J.; Ghose, S.

    1985-09-01

    A computer code was developed to model a Tandem Mirror Reactor. Ths is the first Tandem Mirror Reactor model to couple, in detail, the highly linked physics, magnetics, and neutronic analysis into a single code. This report describes the code architecture, provides a summary description of the modules comprising the code, and includes an example execution of the Tandem Mirror Reactor Systems Code. Results from this code for two sensitivity studies are also included. These studies are: (1) to determine the impact of center cell plasma radius, length, and ion temperature on reactor cost and performance at constant fusion power; and (2) to determine the impact of reactor power level on cost.

  3. April 27, 2011 - How to Work with the Media Webinar (text version...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Home Performance with ENERGY STAR Webinar (text version) May 21, 2011 - Getting Useful Real Time Feedback About Your Program Webinar (text version) Marketing & Driving Demand: ...

  4. Conocimiento de Energía, Spanish Version of the Energy Literacy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conocimiento de Energa, Spanish Version of the Energy Literacy Framework, is Unveiled Conocimiento de Energa, Spanish Version of the Energy Literacy Framework, is Unveiled ...

  5. Algal Supply System Design - Harmonized Version

    SciTech Connect (OSTI)

    Abodeely, Jared; Stevens, Daniel; Ray, Allison; Newby, Deborah; Schaller, Kastli

    2013-03-01

    The objective of this design report is to provide an assessment of current technologies used for production, dewatering, and converting microalgae cultivated in open-pond systems to biofuel. The original draft design was created in 2011 and has subsequently been brought into agreement with the DOE harmonized model. The design report extends beyond this harmonized model to discuss some of the challenges with assessing algal production systems, including the ability to (1) quickly assess alternative algal production system designs, (2) assess spatial and temporal variability, and (3) perform large-scale assessments considering multiple scenarios for thousands of potential sites. The Algae Logistics Model (ALM) was developed to address each of these limitations of current modeling efforts to enable assessment of the economic feasibility of algal production systems across the United States. The (ALM) enables (1) dynamic assessments using spatiotemporal conditions, (2) exploration of algal production system design configurations, (3) investigation of algal production system operating assumptions, and (4) trade-off assessments with technology decisions and operating assumptions. The report discusses results from the ALM, which is used to assess the baseline design determined by harmonization efforts between U.S. DOE national laboratories. Productivity and resource assessment data is provided by coupling the ALM with the Biomass Assessment Tool developed at PNNL. This high-fidelity data is dynamically passed to the ALM and used to help better understand the impacts of spatial and temporal constraints on algal production systems by providing a cost for producing extracted algal lipids annually for each potential site.

  6. Isothermal Multiphase Flash Calculations with the PC-SAFT Equation of State

    SciTech Connect (OSTI)

    Justo-Garcia, Daimler N.; Garcia-Sanchez, Fernando; Romero-Martinez, Ascencion

    2008-03-05

    A computational approach for isothermal multiphase flash calculations with the PC-SAFT (Perturbed-Chain Statistical Associating Fluid Theory) equation of state is presented. In the framework of the study of fluid phase equilibria of multicomponent systems, the general multiphase problem is the single most important calculation which consists of finding the correct number and types of phases and their corresponding equilibrium compositions such that the Gibbs energy of the system is a minimum. For solving this problem, the system Gibbs energy was minimized using a rigorous method for thermodynamic stability analysis to find the most stable state of the system. The efficiency and reliability of the approach to predict and calculate complex phase equilibria are illustrated by solving three typical problems encountered in the petroleum industry.

  7. Epidemilogical Simulation System, Version 2.4

    Energy Science and Technology Software Center (OSTI)

    2004-01-30

    EpiSims uses a detailed simulation of disease spread to evaluate demographically and geographically targeted biological threat reduction strategies. Abstract: EpiSims simulates the spread of disease and analyzes the consequences of intervention strategies in a large urban area at the level of individuals. The simulation combines models of three dynamical systems: urban social networks, disease transmission, and within-host progression of a disease. Validated population mobility and activity generation technology provides the social network models, Disease modelsmore » are based on fusion of expert opinion and available data. EpiSims provides a previously unavailable detailed representation of the course of an outbreak in urban area. A letter of August 16, 2002 from the Office of Homeland Security states: "Ability of EpiSims to provide comprehensive data on daily activity patterns of individuals makes it far superior to traditional SIR models — clearly had an impact on pre-attack smallpox vaccination policy." EpiSims leverages a unique Los Alamos National Laboratory resource — the population mobility and activity data developed by TRANSIMS (Transportation Analysis and SiMulation System) — to create epidemiological analyses at an unprecedented level of detail. We create models of microscopic (individual-level) physical and biological processes from which, through simulation, emerge the macroscopic (urban regional level) quantities that are the inputs to alternative models. For example, the contact patterns of individuals in different demographic groups determine the overall mixing rates those groups. The characteristics of a person-to-person transmission together with their contact patterns determine the reproductive numbers — how many people will be infected on average by each case. Mixing rates and reproductive numbers are the basic parameters of other epidemiological models. Because interventions — and people’s reactions to them — are ultimately applied at the individual level, EpiSims is uniquely suited to evaluate their macroscopic consequences. For example, the debate over the logistics of targeted vaccination for smallpox, and thus the magnitude of the threat it poses, can best be resolved through an individual- based approach. EpiSims is the only available analytical tool using the individual-based approach that can scale to populations of a million or more without introducing ad-hoc assumptions about the nature of the social network. Impact: The first study commissioned for the EpiSims project was to analyze the effectiveness of targeted vaccination and isolation strategies in the aftermath of a covert release of smallpox at a crowded urban location. In particular we compared casualties and resources required for targeted strategies with those in the case of large-scale quarantine and/or mass vaccination campaigns. We produced this analysis in a sixty-day effort, while prototype software was still under development and delivered it to the Office of Homeland Security in June 2002. More recently, EpiSims provided casualty estimates and cost/benefit analyses for various proposed responses to an attack with pneumonic plague during the TOPOFF-2 exercise. Capabilities: EpiSims is designed to simulate human-human transmissible disease, but it is part of a suite of tools that naturally allow it to estimate individual exposures to air-borne or water-borne spread. Combined with data on animal density and mobility, EpiSims could simulate diseases spread by non-human vectors. EpiSims incorporates reactions of individuals, and is particularly powerful if those reactions are correlated with demographics. It provides a standard for modeling scenarios that cuts across agencies.« less

  8. Web/Fact Sheet Version 1

    Energy Savers [EERE]

    Over the coming months there will be a number of ways for the public to provide input on important elements in designing a consent-based process. These include: CONSENT-BASED SITING OPPORTUNITIES TO PARTICIPATE How can the Department ensure that the process for selecting a site is fair? What models and experience should the Department use in designing the process? Who should be involved in the process for selecting a site, and what is their role? What information and resources do you think would

  9. GT Merge Process: Version 1.0

    SciTech Connect (OSTI)

    Flanagan, M P; Dodge, D; Myers, S C

    2008-06-10

    This document summarizes the process used to merge GT25 and better data between LANL and LLNL for use in a tomographic inversion for Pn velocity of Eurasia. The merge process is automated and includes extensive quality control operations at each step. Events in common between the labs are identified and resolved using GT level criteria. Arrivals in common between the labs are also resolved through the use of agreed upon arrival author rankings. Finally, baselined origin times are computed for all crustal events using either teleseismic P-arrivals and the iasp91 model or, in certain regions, regional P-arrivals and regional velocity models that are known to be consistent with teleseismic iasp91 P-wave predictions. We combine the core tables from each lab and first resolve unique and common GT events between LANL and LLNL. Phase names are then checked and possibly adjusted for consistency. Next, we merge at the pick level so that each distinct EVENT-STATION-PHASE tuple has a unique arrival. All BMEB (Bondar-Myers-Engdahl-Bergman) GT are evaluated for adherence to their criteria, and possibly re-calculated. Finally, new origin times are computed (baselining) for the merged GT events. In addition to the reconciliation of events and picks between LANL and LLNL, the merge process involves several quality control steps that are intended to remove outlier and irrelevant data from the final results.

  10. OC)elRM(o-T/^ DOE/PC/60810-TIO TITLE: Superacid Catalyzed Coal Conversion Chemistry DE86 015045

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OC)elRM(o-T/^ DOE/PC/60810-TIO TITLE: Superacid Catalyzed Coal Conversion Chemistry DE86 015045 PIs(Authors): George A. Olah INSTITUTION/ORGANIZATION UNIVERSITY OF SOUTHERN CALIFORNIA HYDROCARBON RESEARCH INSTITUTE CONTRACT NO.: FINAL TECHNICAL REPORT (213)743-5277 DE-FG22-83PC60810 September 1,1983-September 1,1986 The basis of our studies was a novel, low temperature, mild coal conversion process developed in our laboratory. It involves the use of a superacidic system consisting of HF and BF,

  11. ENERGY STAR Certified Homes, Version 3 (Rev. 07) Inspection Checklists for National Program Requirements

    Broader source: Energy.gov [DOE]

    ENERGY STAR Certified Homes, Version 3 (Rev. 07) Inspection Checklists for National Program Requirements

  12. Inclusion in the Workplace - Text Version | Careers | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inclusion in the Workplace - Text Version This is the text version for the Inclusion in the Workplace video. Manajit Sengupta: I work at NREL because of primarily the challenges, the excitement of the work, and the people I work with. Suzy Belmont: When people feel safe and they feel accepted, they're able to bring the best parts of themselves forward, and they're able to bring exciting new ideas forward because they feel like they can fail, they feel like they can try out new things. Bobi

  13. APS beamline standard components handbook, Version 1. 3

    SciTech Connect (OSTI)

    Hahn, U.; Shu, D.; Kuzay, T.M.

    1993-02-01

    This Handbook in its current version (1.3) contains descriptions, specifications, and preliminary engineering design drawings for many of the standard components. The design status and schedules have been provided wherever possible. In the near future, the APS plans to update engineering drawings of identified standard beamline components and complete the Handbook. The completed version of this Handbook will become available to both the CATs and potential vendors. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction.

  14. What's New with BEDES?, The Version 1.2 Release and How You Can Benefit!

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webinar (Text Version) | Department of Energy What's New with BEDES?, The Version 1.2 Release and How You Can Benefit! Webinar (Text Version) What's New with BEDES?, The Version 1.2 Release and How You Can Benefit! Webinar (Text Version) Below is the text version of the webinar What's New with BEDES?, The Version 1.2 Release and How You Can Benefit!, presented in October 2015. Watch the webinar. Nancy Gonzalez: Presentation cover slide: Hi, everyone. This is Nancy Gonzalez with DOE. I think

  15. Observation of 23 supernovae that exploded <300 pc from Earth during the past 300 kyr

    SciTech Connect (OSTI)

    Firestone, R. B.

    2014-07-01

    Four supernovae (SNe), exploding ≤300 pc from Earth, were recorded 44, 37, 32, and 22 kyr ago in the radiocarbon ({sup 14}C) record during the past 50 kyr. Each SN left a nearly identical signature in the record, beginning with an initial sudden increase in atmospheric radiocarbon, when the SN exploded, followed by a hiatus of 1500 yr, and concluding with a sustained 2000 yr increase in global radiocarbon due to γ-rays produced by diffusive shock in the SN remnant (SNR). For the past 18 kyr excess radiocarbon has decayed with the {sup 14}C half-life. SN22kyrBP, is identified as the Vela SN that exploded 250 ± 30 pc from Earth. These SN are confirmed in the {sup 10}Be, {sup 26}Al, {sup 36}Cl, and NO{sub 3}{sup −} geologic records. The rate of near-Earth SNe is consistent with the observed rate of historical SNe giving a galactic rate of 14 ± 3 kyr{sup –1} assuming the Chandra Galactic Catalog SNR distribution. The Earth has been used as a calorimeter to determine that ≈2 × 10{sup 49} erg were released as γ-rays at the time of each SN explosion and ≈10{sup 50} erg in γ-rays following each SN. The background rate of {sup 14}C production by cosmic rays has been determined as 1.61 atoms cm{sup –2} s{sup –1}. Approximately 1/3 of the cosmic ray energy produced by diffusive shock in the SNR was observed to be emitted as high-energy γ-rays. Analysis of the {sup 10}Be/{sup 9}Be ratio in marine sediment identified 19 additional near-Earth SNe that exploded 50-300 kyr ago. Comparison of the radiocarbon record with global temperature variations indicated that each SN explosion is correlated with a concurrent global warming of ≈3°C-4°C.

  16. April 27, 2011 - How to Work with the Media Webinar (text version) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy April 27, 2011 - How to Work with the Media Webinar (text version) April 27, 2011 - How to Work with the Media Webinar (text version) Text version of the Better Buildings webinar on April 27, 2011. PDF icon Webinar transcript More Documents & Publications Home Performance with ENERGY STAR Webinar (text version) May 21, 2011 - Getting Useful Real Time Feedback About Your Program Webinar (text version) Marketing & Driving Demand: Social Media Tools & Strategies

  17. Gasoline prices continue to decrease nationally (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.58 a gallon on Monday. That's down 4.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  18. PGI version 11.3 available on Euclid

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11.3 available on Euclid PGI version 11.3 available on Euclid March 15, 2011 by Mike Stewart PGI release 11.3 is now available on Euclid. To try it: module swap pgi pgi11.3. If...

  19. U.S. gasoline price continues to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $2.30 a gallon on Monday. That's up 5.8 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  20. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.03 a gallon on Monday. That's down 6-tenths of a penny from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  1. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.00 a gallon on Monday. That's down 3.2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  2. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $1.91 a gallon on Monday. That's down 8.2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  3. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $1.86 a gallon on Monday. That's down 5.8 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  4. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $1.82 a gallon on Monday. That's down 3.4 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  5. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $1.76 a gallon on Monday. That's down 6.3 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  6. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $1.72 a gallon on Monday. That's down 3 ½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  7. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $1.73 a gallon on Monday. That's up 6- tenths of a penny from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  8. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $1.78 a gallon on Monday. That's up 5.3 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  9. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $1.84 a gallon on Monday. That's up 5.8 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  10. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $1.96 a gallon on Monday. That's up 12 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  11. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.44 a gallon on Monday. That's down 7.3 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  12. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.38 a gallon on Monday. That's down 6.2 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  13. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.23 a gallon on Monday. That's down 4.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  14. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.22 a gallon on Monday. That's down 4-tenths of a penny from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  15. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.09 a gallon on Monday. That's down 8.4 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  16. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    gasoline prices continue to decrease (short version) The U.S. average retail price for regular gasoline fell to $2.82 a gallon on Monday. That's down 7.3 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  17. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.06 a gallon on Monday. That's down 3 ½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  18. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    gasoline prices continue to decrease (short version) The U.S. average retail price for regular gasoline fell to $2.78 a gallon on Monday. That's down 4.3 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  19. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.05 a gallon on Monday. That's down 6-tenths of a penny from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  20. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.03 a gallon on Monday. That's down 1.1 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  1. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    gasoline prices continue to decrease (short version) The U.S. average retail price for regular gasoline fell to $3.45 a gallon on Monday. That's down 1.8 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  2. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.35 a gallon on Monday. That's down 1.3 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  3. U.S. gasoline prices continue to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.27 a gallon on Monday. That's down 2.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  4. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $2.01 a gallon on Monday. That's up 4.6 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  5. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $2.07 a gallon on Monday. That's up 5.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  6. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $2.08 a gallon on Monday. That's up 1.7 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  7. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $2.16 a gallon on Monday. That's up 2 ½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  8. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline rose to $2.24 a gallon on Monday. That's up 7.8 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  9. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.63 a gallon on Monday. That's down 1.4 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  10. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.56 a gallon on Monday. That's down 7.1 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  11. U.S. gasoline prices continue to increase (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $3.55 a gallon on Monday. That's down 1.1 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  12. U.S. gasoline prices continued to decreased (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    U.S. gasoline prices continued to decreased (short version) The U.S. average retail price for regular gasoline fell to $3.24 a gallon on Monday. That's down 3 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration

  13. U.S. gasoline prices continues to decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    short version) The U.S. average retail price for regular gasoline fell to $2.33 a gallon on Monday. That's down 4.8 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  14. U.S. gasoline prices decrease (Short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    6, 2015 U.S. gasoline prices decrease (Short version) The U.S. average retail price for regular gasoline fell to $2.41 a gallon on Monday. That's down 3 ½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. This is Amerine Woodyard, with EIA, in Washington.

  15. U.S. gasoline prices decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    6, 2014 U.S. gasoline prices decrease (short version) The U.S. average retail price for regular gasoline fell to $3.30 a gallon on Monday. That's down a nickel and a half from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. This is Amerine Woodyard

  16. U.S. gasoline prices decrease (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    gasoline prices decrease (short version) The U.S. average retail price for regular gasoline fell to $3.64 a gallon on Monday. That's down 4.3 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration.

  17. U.S. gasoline prices unchanged (short version)

    U.S. Energy Information Administration (EIA) Indexed Site

    gasoline prices decrease (short version) The U.S. average retail price for regular gasoline fell to $3.68 a gallon on Monday. That's down 2.6 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. This is Amerine Woodyard, with EIA, in Washington

  18. DISCOVERY OF A BINARY BROWN DWARF AT 2 pc FROM THE SUN

    SciTech Connect (OSTI)

    Luhman, K. L.

    2013-04-10

    I am using multi-epoch astrometry from the Wide-field Infrared Survey Explorer (WISE) to search for new members of the solar neighborhood via their high proper motions. Through this work, I have identified WISE J104915.57-531906.1 as a high proper motion object and have found additional detections in images from the Digitized Sky Survey, the Two Micron All-Sky Survey, and the Deep Near-Infrared Survey of the Southern Sky. I have measured a parallax of 0.''496 {+-} 0.''037 (2.0 {+-} 0.15 pc) from the astrometry in these surveys, making WISE J104915.57-531906.1 the third closest system to the Sun. During spectroscopic observations with the Gemini Multi-Object Spectrograph at Gemini Observatory, an i-band acquisition image resolved it as a 1.''5 (3 AU) binary. A spectrum was collected for the primary, which I classify as L8 {+-} 1. The secondary is probably near the L/T transition as well given that it is only modestly fainter than the primary ({Delta}i = 0.45 mag).

  19. POTENTIAL MEMBERS OF STELLAR KINEMATIC GROUPS WITHIN 30 pc OF THE SUN

    SciTech Connect (OSTI)

    Nakajima, Tadashi; Morino, Jun-Ichi

    2012-01-15

    We analyze the kinematic histories of stars within 30 pc of the Sun, for which three-dimensional spatial coordinates and three-dimensional velocity vectors are available. From this sample, we extract members of stellar kinematic groups (SKGs) in the following manner. First, we consider in the three-dimensional velocity space centered on the local standard of rest, a sphere with a radius of 8 km s{sup -1} centered on the mean velocity vector of a particular SKG. Around each SKG velocity center, we have found a significant excess of stars compared to background field stars. For each candidate, in the three-dimensional spatial coordinate space, its trajectory is traced back in time by the age of the relevant SKG to obtain the estimated distance from the SKG center at the time of the SKG's birth by the epicyclic approximation and harmonic vertical motion. It often happens that a star is a candidate member of multiple SKGs. Then we rank the candidacy to multiple SKGs based on the smallness of distance separations. In this manner, we have kinematically selected 238 candidates. We further impose at least one of the following qualitative criteria for being a member: spectral type A or B, variability, or EUV and X-ray emission. We have finally selected 137 candidate members of SKGs out of a sample of 966 stars.

  20. I{sup G}J{sup PC}=1{sup -}1{sup -+} tetraquark states

    SciTech Connect (OSTI)

    Chen Huaxing; Hosaka, Atsushi; Zhu Shilin

    2008-09-01

    We study the tetraquark states with I{sup G}J{sup PC}=1{sup -}1{sup -+} in the QCD sum rule. After exhausting all possible flavor structures, we analyze both the Shifman-Vainshtein-Zakharov (SVZ) and finite energy sum rules. Both approaches lead to a mass around 1.6 GeV for the state with the quark contents qqqq, and around 2.0 GeV for the state with the quark contents qsqs. The flavor structure (3 x 6)+(6 x 3) is preferred. Our analysis strongly indicates that both {pi}{sub 1}(1600) and {pi}{sub 1}(2015) are also compatible with the exotic tetraquark interpretation, which are sometimes labeled as candidates of the 1{sup -+} hybrid mesons. Moreover one of their dominant decay modes is a pair of axial-vector and pseudoscalar mesons such as b{sub 1}(1235){pi}, which is sometimes considered as the characteristic decay mode of the hybrid mesons.

  1. Understanding the Kondo resonance in the d-CoPc/Au(111) adsorption system

    SciTech Connect (OSTI)

    Wang, Yu; Zheng, Xiao Li, Bin; Yang, Jinlong

    2014-08-28

    By combining the density functional theory (DFT) and a hierarchical equations of motion (HEOM) approach, we investigate the Kondo phenomena in a composite system consisting of a dehydrogenated cobalt phthalocyanine molecule (d-CoPc) adsorbed on an Au(111) surface. DFT calculations are performed to determine the ground-state geometric and electronic structures of the adsorption system. It is found that the singly occupied d{sub z{sup 2}} orbital of Co forms a localized spin, which could be screened by the substrate conduction electrons. This screening leads to the prominent Kondo features as observed in the scanning tunneling microscopy experiments. We then employ the HEOM approach to characterize the Kondo correlations of the adsorption system. The calculated temperature-dependent differential conductance spectra and the predicted Kondo temperature agree well with the experiments, and the universal Kondo scaling behavior is correctly reproduced. This work thus provides important insights into the relevant experiments, and it also highlights the applicability of the combined DFT+HEOM approach to the studies of strongly correlated condensed matter systems.

  2. WINDOW 4. 0: Program description. A PC program for analyzing the thermal performance of fenestration products

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    WINDOW 4.0 is a publicly available IBM PC compatible computer program developed by the Windows and Daylighting Group at Lawrence Berkeley Laboratory for calculating total window thermal performance indices (e.g. U-values, solar heat gain coefficients, shading coefficients, and visible transmittances). WINDOW 4.0 provides a versatile heat transfer analysis method consistent with the rating procedure developed by the National Fenestration Rating Council (NFRC). The program can be used to design and develop new products, to rate and compare performance characteristics of all types of window products, to assist educators in teaching heat transfer through windows, and to help public officials in developing building energy codes. WINDOW 4.0 is a major revision to WINDOW 3.1 and we strongly urge all users to read this manual before using the program. Users who need professional assistance with the WINDOW 4.0 program or other window performance simulation issues are encouraged to contact one or more of the NFRC-accredited Simulation Laboratories. A list of these accredited simulation professionals is available from the NFRC.

  3. Guidelines for Sandia ASCI Verification and Validation Plans - Content and Format: Version 1.0

    SciTech Connect (OSTI)

    TRUCANO,TIMOTHY G.; MOYA,JAIME L.

    1999-12-01

    This report summarizes general guidelines for the development of Verification and Validation (V and V) plans for ASCI code projects at Sandia National Laboratories. The main content categories recommended by these guidelines for explicit treatment in Sandia V and V plans are (1) stockpile drivers influencing the code development project (2) the key phenomena to be modeled by the individual code; (3) software verification strategy and test plan; and (4) code validation strategy and test plans. The authors of this document anticipate that the needed content of the V and V plans for the Sandia ASCI codes will evolve as time passes. These needs will be reflected by future versions of this document.

  4. Modeling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Caterpillar, Sandia CRADA Opens Door to Multiple Research Projects Capabilities, Computational Modeling & Simulation, CRF, Materials Science, Modeling, Modeling, Modeling & ...

  5. IDENTIFYING THE YOUNG LOW-MASS STARS WITHIN 25 pc. II. DISTANCES, KINEMATICS, AND GROUP MEMBERSHIP

    SciTech Connect (OSTI)

    Shkolnik, Evgenya L.; Anglada-Escude, Guillem; Liu, Michael C.; Bowler, Brendan P.; Weinberger, Alycia J.; Boss, Alan P.; Reid, I. Neill; Tamura, Motohide

    2012-10-10

    We have conducted a kinematic study of 165 young M dwarfs with ages of {approx}<300 Myr. Our sample is composed of stars and brown dwarfs with spectral types ranging from K7 to L0, detected by ROSAT and with photometric distances of {approx}<25 pc assuming that the stars are single and on the main sequence. In order to find stars kinematically linked to known young moving groups (YMGs), we measured radial velocities for the complete sample with Keck and CFHT optical spectroscopy and trigonometric parallaxes for 75 of the M dwarfs with the CAPSCam instrument on the du Pont 2.5 m Telescope. Due to their youthful overluminosity and unresolved binarity, the original photometric distances for our sample underestimated the distances by 70% on average, excluding two extremely young ({approx}<3 Myr) objects found to have distances beyond a few hundred parsecs. We searched for kinematic matches to 14 reported YMGs and identified 10 new members of the AB Dor YMG and 2 of the Ursa Majoris group. Additional possible candidates include six Castor, four Ursa Majoris, two AB Dor members, and one member each of the Her-Lyr and {beta} Pic groups. Our sample also contains 27 young low-mass stars and 4 brown dwarfs with ages {approx}<150 Myr that are not associated with any known YMG. We identified an additional 15 stars that are kinematic matches to one of the YMGs, but the ages from spectroscopic diagnostics and/or the positions on the sky do not match. These warn against grouping stars together based only on kinematics and that a confluence of evidence is required to claim that a group of stars originated from the same star-forming event.

  6. WIDE COMPANIONS TO HIPPARCOS STARS WITHIN 67 pc OF THE SUN

    SciTech Connect (OSTI)

    Tokovinin, Andrei; Lepine, Sebastien E-mail: lepine@amnh.org

    2012-10-01

    A catalog of common-proper-motion (CPM) companions to stars within 67 pc of the Sun is constructed based on the SUPERBLINK proper-motion survey. It contains 1392 CPM pairs with angular separations 30'' < {rho} < 1800'', relative proper motion between the two components less than 25 mas yr{sup -1}, and magnitudes and colors of the secondaries consistent with those of dwarfs in the (M{sub V} , V - J) diagram. In addition, we list 21 candidate white dwarf CPM companions with separations under 300'', about half of which should be physical. We estimate a 0.31 fraction of pairs with red dwarf companions to be physical systems (about 425 objects), while the rest (mostly wide pairs) are chance alignments. For each candidate companion, the probability of a physical association is evaluated. The distribution of projected separations s of the physical pairs between 2 kAU and 64 kAU follows f(s){proportional_to}s {sup -1.5}, which decreases faster than Oepik's law. We find that solar-mass dwarfs have no less than 4.4% {+-} 0.3% companions with separations larger than 2 kAU, or 3.8% {+-} 0.3% per decade of orbital separation in the 2-16 kAU range. The distribution of mass ratio of those wide companions is approximately uniform in the 0.1 < q < 1.0 range, although we observe a dip at q {approx_equal} 0.5 which, if confirmed, could be evidence of bimodal distribution of companion masses. New physical CPM companions to two exoplanet host stars are discovered.

  7. Characterization of an acetyl xylan esterase from the anaerobic fungus Orpinomyces sp. strain PC-2

    SciTech Connect (OSTI)

    Blum, D.L.; Li, X.L.; Chen, H.; Ljungdahl, L.G.

    1999-09-01

    A 1,067-bp cDNA, designated axeA, coding for an acetyl xylan esterase (AxeA) was cloned from the anaerobic rumen fungus Orpinomyces sp. strain PC-2. The gene had an open reading frame of 939 bp encoding a polypeptide of 313 amino acid residues with a calculated mass of 34,845 Da. An active esterase using the original start codon of the cDNA was synthesized in Escherichia coli. Two active forms of the esterase were purified from recombinant E. coli cultures. The size difference of 8 amino acids was a result of cleavages at two different sites within the signal peptide. The enzyme released acetate from several acetylated substrates, including acetylated xylan. The activity toward acetylated xylan was tripled in the presence of recombinant xylanase A from the same fungus. Using p-nitrophenyl acetate as a substrate, the enzyme had a K{sub m} of 0.9 mM and a V{sub max} of 785 {micro}mol min{sup {minus}} mg{sup {minus}1}. It had temperature and pH optima of 30 C and 9.0, respectively. AxeA had 56% amino acid identity with BnaA, an acetyl xylan esterase of Neocallimastix patriciarum, but the Orpinomyces AxeA was devoid of a noncatalytic repeated peptide domain (NCRPD) found at the carboxy terminus of the Neocallimastix BnaA. The NCRPD found in many glycosyl hydrolases and esterases of anaerobic fungi has been postulated to function as a docking domain for cellulase-hemicellulase complexes, similar to the dockerin of the cellulosome of Clostridium thermocellum.

  8. The Expanded Capabilities Of The Cementitious Barriers Partnership Software Toolbox Version 2.0 - 14331

    SciTech Connect (OSTI)

    Burns, Heather; Flach, Greg; Smith, Frank; Langton, Christine; Brown, Kevin; Kosson, David; Samson, Eric; Mallick, Pramod

    2014-01-10

    The Cementitious Barriers Partnership (CBP) Project is a multi-disciplinary, multi-institutional collaboration supported by the U.S. Department of Energy (US DOE) Office of Tank Waste Management. The CBP program has developed a set of integrated tools (based on state-of-the-art models and leaching test methods) that help improve understanding and predictions of the long-term structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. The CBP Software Toolbox Version 1.0 was released early in FY2013 and was used to support DOE-EM performance assessments in evaluating various degradation mechanisms that included sulfate attack, carbonation and constituent leaching. The sulfate attack analysis predicted the extent and damage that sulfate ingress will have on concrete vaults over extended time (i.e., > 1000 years) and the carbonation analysis provided concrete degradation predictions from rebar corrosion. The new release Version 2.0 includes upgraded carbonation software and a new software module to evaluate degradation due to chloride attack. Also included in the newer version are a dual regime module allowing evaluation of contaminant release in two regimes both fractured and un-fractured. The integrated software package has also been upgraded with new plotting capabilities and many other features that increase the user-friendliness of the package. Experimental work has been generated to provide data to calibrate the models to improve the credibility of the analysis and reduce the uncertainty. Tools selected for and developed under this program have been used to evaluate and predict the behavior of cementitious barriers used in near-surface engineered waste disposal systems for periods of performance up to or longer than 100 years for operating facilities and longer than 1000 years for waste disposal. The CBP Software Toolbox is and will continue to produce tangible benefits to the working DOE Performance Assessment (PA) community.

  9. Text-Alternative Version of Building America Webinar: Central Multifamily

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Water Heating Systems | Department of Energy Central Multifamily Water Heating Systems Text-Alternative Version of Building America Webinar: Central Multifamily Water Heating Systems Central Multifamily Water Heating Systems January 21, 2015 Elizabeth Weitzel, Alliance for Residential Building Innovation (ARBI) Jordan Dentz, Advanced Residential Integrated Energy Solutions (ARIES) Eric Ansanelli, Advanced Residential Integrated Energy Solutions (ARIES) Gail: Hello everyone, I'm Gail Werren

  10. Text-Alternative Version of Building America Webinar: High Performance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments | Department of Energy Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments Text-Alternative Version of Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments October 27, 2015 Speakers Katherine Cort, Research Economist, Pacific Northwest National

  11. Text-Alternative Version of Building America Webinar: Retrofitting Central

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Space Conditioning Strategies for Multifamily Buildings | Department of Energy Retrofitting Central Space Conditioning Strategies for Multifamily Buildings Text-Alternative Version of Building America Webinar: Retrofitting Central Space Conditioning Strategies for Multifamily Buildings Gail Werren: Hello, everyone I am Gail Werren with the National Renewable Energy Laboratory and I'd like to welcome you to today's webinar hosted by the Building America program. We're excited to have

  12. Text-Alternative Version of Building America Webinar: Solutions for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Combustion Safety in Existing Homes | Department of Energy Solutions for Combustion Safety in Existing Homes Text-Alternative Version of Building America Webinar: Solutions for Combustion Safety in Existing Homes Solutions for Combustion Safety in Existing Homes 12/16/15 Speakers Larry Brand, Research and Development Manager at the Gas Technology Institute and the Partnership for Advanced Residential Retrofit (PARR) David Bohac, Director of Research with the Center for Energy and Environment

  13. Text-Alternative Version of Building America Webinar: Ventilation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategies for High Performance Homes, Part I: Application-Specific Ventilation Guidelines | Department of Energy Ventilation Strategies for High Performance Homes, Part I: Application-Specific Ventilation Guidelines Text-Alternative Version of Building America Webinar: Ventilation Strategies for High Performance Homes, Part I: Application-Specific Ventilation Guidelines August 26, 2015 Building America - Ventilation Strategies for High Performance Homes, Part I: Application-Specific

  14. Text-Alternative Version of High Performance Space Conditioning Systems:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Part I | Department of Energy I Text-Alternative Version of High Performance Space Conditioning Systems: Part I High Performance Space Conditioning Systems: Part I October 21, 2014 Andrew Poerschke, Research Initiatives Specialist, IBACOS Kohta Ueno, Senior Associate, Building Science Corporation Gail: Hello everyone. I am Gail Werren with the National Renewable Energy Laboratory. And I'd like to welcome you to today's webinar hosted by the Building America Program. We are excited to have

  15. Text-Alternative Version of High Performance Space Conditioning Systems:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Part II | Department of Energy II Text-Alternative Version of High Performance Space Conditioning Systems: Part II High Performance Space Conditioning Systems: Part II November 18, 2014 William Zoeller, Stephen Winter Associates Dave Mallay, Home Innovation Research Labs Jordan Dentz, The Levy Partnership Francis Conlin, High Performance Building Solutions Hello everyone! I am Gail Werren with the National Renewable Energy Laboratory, and I'd like to welcome you to today's webinar hosted by

  16. 508 Compliant Version - TEPP Training Brochure | Department of Energy

    Office of Environmental Management (EM)

    Training Brochure 508 Compliant Version - TEPP Training Brochure The Transportation Emergency Preparedness Program (TEPP) developed the Modular Emergency Response Radiological Transportation Training (MERRTT) to address concerns from States, Tribes, and local jurisdictions about shipments of radioactive material by the U.S. Department of Energy. MERRTT was developed through the Training and Medical Issues Topic Group of the Transportation External Coordination Working Group (TEC). DOE formed TEC

  17. PRIVACY IMPACT ASSESSMENT: CF GovTrip PIA Template Version

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CF - GovTrip PIA Template Version 3 - May, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1, Department of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetextlneword/206/02061.pdf MODULE 1- PRIVACY NEEDS ASSESSMENT Date Departmental Element &Site July 28, 2009 General Services Administration NORTHROP

  18. PRIVACY IMPACT ASSESSMENT: INL INGSM2009 PIA Template Version

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PRIVACY IMPACT ASSESSMENT: INL INGSM2009 PIA Template Version 3 - May, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1, Department of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetext/neword/206/o2061.pdf Please complete electronically: no hand-written submissions will be accepted. This template may not be

  19. Text-Alternative Version: Challenges in LED Research and Development |

    Energy Savers [EERE]

    Department of Energy LED Research and Development Text-Alternative Version: Challenges in LED Research and Development Narrator: LEDs have made remarkable progress in the past decade and gained a strong foothold in the US marketplace. In 2012, LED lighting saved an estimated 71 trillion BTUs, equivalent to annual energy savings of $675 million. By 2013, that number had more than doubled, which equates to about $1.8 billion in annual energy savings. John Delany, Commonwealth Edison: The LED

  20. Text-Alternative Version: Challenges in OLED Research and Development |

    Energy Savers [EERE]

    Department of Energy OLED Research and Development Text-Alternative Version: Challenges in OLED Research and Development Narrator: Organic light-emitting diodes, OLEDs, are made using organic carbon-based materials. Unlike LEDs, which are small point light sources, OLEDs are made in sheets that create diffuse area lighting. As a result, the OLED offers a range of qualities beyond the scope of the LED - qualities that could revolutionize both commercial and residential lighting. James

  1. IDC System Specification Document Version 1.1.

    SciTech Connect (OSTI)

    Harris, James M.; Lober, Randall R.

    2015-02-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 IDC Reengineering Project Team Iteration I2 Review Comments M. Harris

  2. Sandia Labs Releases New Version of PVLib Toolbox

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Labs Releases New Version of PVLib Toolbox - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management

  3. The National Energy Audit (NEAT) Engineering Manual (Version 6)

    SciTech Connect (OSTI)

    Gettings, M.B.

    2001-04-20

    Government-funded weatherization assistance programs resulted from increased oil prices caused by the 1973 oil embargo. These programs were instituted to reduce US consumption of oil and help low-income families afford the increasing cost of heating their homes. In the summer of 1988, Oak Ridge National Laboratory (ORNL) began providing technical support to the Department of Energy (DOE) Weatherization Assistance Program (WAP). A preliminary study found no suitable means of cost-effectively selecting energy efficiency improvements (measures) for single-family homes that incorporated all the factors seen as beneficial in improving cost-effectiveness and usability. In mid-1989, ORNL was authorized to begin development of a computer-based measure selection technique. In November of 1992 a draft version of the program was made available to all WAP state directors for testing. The first production release, Version 4.3, was made available in october of 1993. The Department of Energy's Weatherization Assistance Program has continued funding improvements to the program increasing its user-friendliness and applicability. initial publication of this engineering manual coincides with availability of Version 6.1, November 1997, though algorithms described generally apply to all prior versions. Periodic updates of specific sections in the manual will permit maintaining a relevant document. This Engineering Manual delineates the assumptions used by NEAT in arriving at the measure recommendations based on the user's input of the building characteristics. Details of the actual data entry are available in the NEAT User's Manual (ORNL/Sub/91-SK078/1) and will not be discussed in this manual.

  4. GridPV Toolbox Version 2 Now Available

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GridPV Toolbox Version 2 Now Available - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management

  5. Electricity Subsector Cybersecurity Capability Maturity Model...

    Broader source: Energy.gov (indexed) [DOE]

    The Electricity Subsector Cybersecurity Capability Maturity Model (ES-C2M2) Version 1.1, which allows electric utilities and grid operators to assess their cybersecurity...

  6. Radiological Safety Analysis Computer (RSAC) Program Version 7.2 Users Manual

    SciTech Connect (OSTI)

    Dr. Bradley J Schrader

    2010-10-01

    The Radiological Safety Analysis Computer (RSAC) Program Version 7.2 (RSAC-7) is the newest version of the RSAC legacy code. It calculates the consequences of a release of radionuclides to the atmosphere. A user can generate a fission product inventory from either reactor operating history or a nuclear criticality event. RSAC-7 models the effects of high-efficiency particulate air filters or other cleanup systems and calculates the decay and ingrowth during transport through processes, facilities, and the environment. Doses are calculated for inhalation, air immersion, ground surface, ingestion, and cloud gamma pathways. RSAC-7 can be used as a tool to evaluate accident conditions in emergency response scenarios, radiological sabotage events and to evaluate safety basis accident consequences. This users manual contains the mathematical models and operating instructions for RSAC-7. Instructions, screens, and examples are provided to guide the user through the functions provided by RSAC-7. This program was designed for users who are familiar with radiological dose assessment methods.

  7. CaveMan Enterprise version 1.0 Software Validation and Verification.

    SciTech Connect (OSTI)

    Hart, David

    2014-10-01

    The U.S. Department of Energy Strategic Petroleum Reserve stores crude oil in caverns solution-mined in salt domes along the Gulf Coast of Louisiana and Texas. The CaveMan software program has been used since the late 1990s as one tool to analyze pressure mea- surements monitored at each cavern. The purpose of this monitoring is to catch potential cavern integrity issues as soon as possible. The CaveMan software was written in Microsoft Visual Basic, and embedded in a Microsoft Excel workbook; this method of running the CaveMan software is no longer sustainable. As such, a new version called CaveMan Enter- prise has been developed. CaveMan Enterprise version 1.0 does not have any changes to the CaveMan numerical models. CaveMan Enterprise represents, instead, a change from desktop-managed work- books to an enterprise framework, moving data management into coordinated databases and porting the numerical modeling codes into the Python programming language. This document provides a report of the code validation and verification testing.

  8. User Guide for VISION 3.4.7 (Verifiable Fuel Cycle Simulation) Model

    SciTech Connect (OSTI)

    Jacob J. Jacobson; Robert F. Jeffers; Gretchen E. Matthern; Steven J. Piet; Wendell D. Hintze

    2011-07-01

    The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters and options; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R&D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating 'what if' scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level. The model is not intended as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., 'reactor types' not individual reactors and 'separation types' not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation or disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. VISION is comprised of several Microsoft Excel input files, a Powersim Studio core, and several Microsoft Excel output files. All must be co-located in the same folder on a PC to function. You must use Powersim Studio 8 or better. We have tested VISION with the Studio 8 Expert, Executive, and Education versions. The Expert and Education versions work with the number of reactor types of 3 or less. For more reactor types, the Executive version is currently required. The input files are Excel2003 format (xls). The output files are macro-enabled Excel2007 format (xlsm). VISION 3.4 was designed with more flexibility than previous versions, which were structured for only three reactor types - LWRs that can use only uranium oxide (UOX) fuel, LWRs that can use multiple fuel types (LWR MF), and fast reactors. One could not have, for example, two types of fast reactors concurrently. The new version allows 10 reactor types and any user-defined uranium-plutonium fuel is allowed. (Thorium-based fuels can be input but several features of the model would not work.) The user identifies (by year) the primary fuel to be used for each reactor type. The user can identify for each primary fuel a contingent fuel to use if the primary fuel is not available, e.g., a reactor designated as using mixed oxide fuel (MOX) would have UOX as the contingent fuel. Another example is that a fast reactor using recycled transuranic (TRU) material can be designated as either having or not having appropriately enriched uranium oxide as a contingent fuel. Because of the need to study evolution in recycling and separation strategies, the user can now select the recycling strategy and separation technology, by year.

  9. VisIt Version 2.0.1

    Energy Science and Technology Software Center (OSTI)

    2010-06-01

    VisIt is an interactive parallel visualization and graphical analysis tool for viewing scientific data on UNIX and PC platforms, Users can quickly generate visualizations from their data, animate them through time, manipulate them, and save the resulting images for presentations, VisIt contains a rich set of visualization features so that you can view your data in a variety of ways. It can be used to visualize scalar and vector fields defined on two and threemore » dimensional (2D and 3D) structured and unstructured meshes. VisIt was designed to handle very large data set sizes in the terascale range and yet can also handle small data sets in kilobyte range.« less

  10. Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps...

    Energy Savers [EERE]

    Information Resources Videos Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer Lighting Text-Alternative Version: CALiPER Series 21 on LED Linear ...

  11. xLPR v2.0 beta 1 version status. (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    beta 1 version status. Citation Details In-Document Search Title: xLPR v2.0 beta 1 version status. Abstract not provided. Authors: Sallaberry, Cedric M. ; Dingreville, Remi ...

  12. Building Technologies Program: Tax Deduction Qualified Software- EnergyPlus version 1.3.0.018

    Broader source: Energy.gov [DOE]

    Provides required documentation that EnergyPlus version 1.3.0.018 version 130 meets Internal Revenue Code §179D, Notice 2006-52, dated June 2, 2006, for calculating commercial building energy and power cost savings.

  13. EA-1086: Amendments to 10 CFR Part 835 (Revised Version- 6/98)

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts of a proposal to issue as a final rulemaking an amended version of 10 CFR Part 835, "Occupational Radiation Protection."  The amended version provides...

  14. How to access older versions of rates? | OpenEI Community

    Open Energy Info (EERE)

    How to access older versions of rates? Home > Groups > Developer In drawing utility rate data from the API, there is a 'revisions' field in the JSON but there are not versions...

  15. Community Renewable Energy Success Stories Webinar: District Heating with Renewable Energy (text version)

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar titled "District Heating with Renewable Energy," originally presented on November 20, 2012.

  16. Text-Alternative Version: Keynote Video from Street and Area Lighting Conference

    Broader source: Energy.gov [DOE]

    Following is a text version of Jim Brodrick's keynote video from the recent Street and Area Lighting Conference.

  17. EECLP Webinar #2: Quality Assurance and Evaluation Monitoring Verification-- Text Version

    Broader source: Energy.gov [DOE]

    Below is the text version of the EECLP Webinar 2: Quality Assurance and Evaluation Monitoring Verification, presented in December 2014.

  18. DOE Zero Energy Ready Home Efficient Hot Water Distribution I-- What's At Stake Webinar (Text Version)

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar, Efficient Hot Water Distribution I -- What's At Stake, presented in January 2014.

  19. Text-Alternative Version: ENERGY STAR® for SSL: Getting Ready for September 30

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the ENERGY STAR® for SSL: Getting Ready for September 30 webcast.

  20. Text-Alternative Version: L Prize™: The Race for Super Efficient Light Bulbs

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the L Prize™: The Race for Super Efficient Light Bulbs webcast.

  1. Community Renewable Energy Success Stories: Community-Scale Anaerobic Digesters (text version)

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar titled "Community-Scale Anaerobic Digesters," originally presented on April 16, 2013.

  2. DOE Building Energy Asset Score: Overview and Deployment Webinar-- Text Version

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar DOE Building Energy Asset Score: Overview and Deployment, presented in March 2015.

  3. Text-Alternative Version of Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study

    Broader source: Energy.gov [DOE]

    Text version of the Building America June 24 Webinar: New Construction Hybrid-Ductless Heat Pumps Study.

  4. Community Renewable Energy Success Stories Webinar: Renewable Energy Parks (text version)

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar titled "Renewable Energy Parks," originally presented on March 19, 2013.

  5. Text-Alternative Version: Successful Selection of LED Streetlight Luminaires Webcast

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Successful Selection of LED Streetlight Luminaires" webcast, held March 6, 2013.

  6. Text-Alternative Version: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting Webcast.

  7. A Comparison of Modifications to MELCOR versions 1.8.2 and 1.8.6 for ITER Safety Analysis

    SciTech Connect (OSTI)

    B. J. Merrill; P. W. Humrickhouse

    2010-06-01

    During the Engineering Design Activity of the International Thermonuclear Experimental Reactor (ITER), the MELCOR 1.8.2 code was selected as one of several codes to be used to perform ITER safety analyses [1]. MELCOR was chosen because it has the capability of predicting coolant pressure, temperature, mass flow rate, and radionuclide and aerosol transport in nuclear facilities and reactor cooling systems. MELCOR can also predict structural temperatures (e.g. first wall, blanket, divertor, and vacuum vessel) resulting from energy produced by radioactive decay heat and/or chemical reactions (oxidation). The Idaho National Laboratory (INL) Fusion Safety Program (FSP) made fusion specific modifications to the MELCOR 1.8.2 code [2-6], including models for water freezing, air condensation, beryllium, carbon, and tungsten oxidation in steam and air environments, flow boiling in coolant loops, and radiation in enclosures, that allowed MELCOR to assess the thermal hydraulic response of ITER cooling systems and the transport of radionuclides as aerosols during accident conditions. Recently, the ITER International Organization (IO) used a “pedigreed” version of MELCOR 1.8.2 [7] to perform accident analyses for ITER’s “Rapport Préliminaire de Sûreté” (Report Preliminary on Safety - RPrS). The MELCOR thermal-hydraulics code [8] is currently under development at the Sandia National Laboratory (SNL) for the US Nuclear Regulatory Commission (NRC). MELCOR is used to model the progression of severe accidents in light water fission reactors. Because MELCOR has undergone many improvements between version 1.8.2 and 1.8.6, the INL FSP decided to introduce fusion modifications into MELCOR 1.8.6, and thereby produce a version of MELCOR 1.8.6 with similar capabilities to the pedigreed version of MELCOR 1.8.2 used for the ITER RPrS. We have applied this version of MELCOR 1.8.6 to the same set of problems used in the MELCOR 1.8.2 pedigree analysis [7]. Section 2 describes a non-regression analysis that involves comparing the results from the modified version of MELCOR 1.8.6 against those predicted by the original, unmodified version of MELCOR 1.8.6. The purpose of this non-regression analysis is to demonstrate that the modifications made to the MELCOR 1.8.6 code do not drastically alter the intended functions of the MELCOR base code, and if they do to explain why the departure occurs and if the change is needed. The analysis was performed using the demonstration problem that came with the MELCOR 1.8.6 source distribution. Section 3 makes a comparison between the pedigreed version of MELCOR 1.8.2 and the new modified version of MELCOR 1.8.6 on a set of accident problems used by the ITER Joint Central Team (JCT) in the Generic Site Safety Report (GSSR) [9]. Finally, in section 4, the two versions of the code are compared on a series of developmental test problems described in the change documents [2-4, 6].

  8. Indoor airPLUS Construction Specifications Version 1 (Rev. 02) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Specifications Version 1 (Rev. 02) Indoor airPLUS Construction Specifications Version 1 (Rev. 02) Indoor airPLUS Construction Specifications Version 1 (Rev. 02), November 2013, from the U.S. Environmental Protection Agency. PDF icon ch_iap.pdf More Documents & Publications Indoor airPLUS Construction Specifications

  9. Microsoft Word - FEMP-State MOU pdf version.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FEMP-State MOU pdf version.doc Microsoft Word - FEMP-State MOU pdf version.doc PDF icon Microsoft Word - FEMP-State MOU pdf version.doc More Documents & Publications FEMP Peer Review 2001 FEMP Customer Survey Report (Appendices) Federal Utility Partnership Working Group Meeting: Washington Update

  10. SMART II : the spot market agent research tool version 2.0.

    SciTech Connect (OSTI)

    North, M. J. N.

    2000-12-14

    Argonne National Laboratory (ANL) has worked closely with Western Area Power Administration (Western) over many years to develop a variety of electric power marketing and transmission system models that are being used for ongoing system planning and operation as well as analytic studies. Western markets and delivers reliable, cost-based electric power from 56 power plants to millions of consumers in 15 states. The Spot Market Agent Research Tool Version 2.0 (SMART II) is an investigative system that partially implements some important components of several existing ANL linear programming models, including some used by Western. SMART II does not implement a complete model of the Western utility system but it does include several salient features of this network for exploratory purposes. SMART II uses a Swarm agent-based framework. SMART II agents model bulk electric power transaction dynamics with recognition for marginal costs as well as transmission and generation constraints. SMART II uses a sparse graph of nodes and links to model the electric power spot market. The nodes represent power generators and consumers with distinct marginal decision curves and varying investment capital as well individual learning parameters. The links represent transmission lines with individual capacities taken from a range of central distribution, outlying distribution and feeder line types. The application of SMART II to electric power systems studies has produced useful results different from those often found using more traditional techniques. Use of the advanced features offered by the Swarm modeling environment simplified the creation of the SMART II model.

  11. Text-Alternative Version of Building America Webinar: Research for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real-World Results | Department of Energy Research for Real-World Results Text-Alternative Version of Building America Webinar: Research for Real-World Results Building America: Research for Real-World Results December 17, 2014 Eric Werling, U.S. Department of Energy, Building America Program Gail: Hello everyone! I am Gail Werren with the National Renewable Energy Laboratory, and I'd like to welcome you to today's webinar hosted by the Building America program. We are excited to have Eric

  12. Gasoline prices continue to decrease nationally (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    long version) The U.S. average retail price for regular gasoline fell to $3.58 a gallon on Monday. That's down 4.9 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast region at 3.95 a gallon, up 6 cents from a week ago, marking the highest regional increase. Prices were lowest in the Gulf Coast States at 3.38 a gallon, down a tenth of a penny.

  13. Text-Alternative Version: Maintenance Practices for LED Streetlights |

    Energy Savers [EERE]

    Department of Energy Maintenance Practices for LED Streetlights Text-Alternative Version: Maintenance Practices for LED Streetlights Bruce Kinzey:So again, I want to welcome everyone to another MSSLC webinar. And we have a great one lined up today. At this point everyone is familiar with the fact that the solid-state street lighting is being installed by the thousands, hundreds of thousands in fact, around the country. I think everyone's also pretty familiar with the kinds of energy savings

  14. NREL: Sustainable NREL - Research Support Facility Photos (Text Version)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Support Facility Photos (Text Version) Here are photos of the Research Support Facility (RSF). An aerial photo with buildings and homes in the foreground, green hills in the background and blue sky above. The RSF is NREL's newest sustainable building on its permanent campus in Golden, Colorado. Credit: Pat Corkery Photo of an office building with two large wings on either side of a courtyard entryway and a tiled roadway in the foreground. The 222,000 sq. ft. RSF achieved the LEED

  15. U.S. gasoline price continues to increase (long version)

    U.S. Energy Information Administration (EIA) Indexed Site

    long version) The U.S. average retail price for regular gasoline rose to $2.30 a gallon on Monday. That's up 5.8 cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Pump prices were highest in the West Coast states at 2.66 a gallon, up 1.4 cents from a week ago. Prices were lowest in the Gulf Coast states at 2.06 a gallon, up 7.7 cents.

  16. Vertical and lateral morphology effects on solar cell performance for a thiophene–quinoxaline copolymer:PC 70BM blend

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hansson, Rickard; Ericsson, Leif K. E.; Holmes, Natalie P.; Rysz, Jakub; Opitz, Andreas; Campoy-Quiles, Mariano; Wang, Ergang; Barr, Matthew G.; Kilcoyne, A. L. David; Zhou, Xiaojing; et al

    2015-02-13

    The distribution of electron donor and acceptor in the active layer is known to strongly influence the electrical performance of polymer solar cells for most of the high performance polymer:fullerene systems. The formulation of the solution from which the active layer is spincoated plays an important role in the quest for morphology control. We have studied how the choice of solvent and the use of small amounts of a low vapour pressure additive in the coating solution influence the film morphology and the solar cell performance for blends of poly[2,3-bis-(3-octyloxyphenyl)quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl] (TQ1) and [6,6]-phenyl C71-butyric acid methyl ester (PC70BM). We havemore » investigated the lateral morphology using atomic force microscopy (AFM) and scanning transmission X-ray microscopy (STXM), the vertical morphology using dynamic secondary ion mass spectrometry (d-SIMS) and variable-angle spectroscopic ellipsometry (VASE), and the surface composition using near-edge X-ray absorption fine structure (NEXAFS). The lateral phase-separated domains observed in films spincoated from single solvents, increase in size with increasing solvent vapour pressure and decreasing PC70BM solubility, but are not observed when 1-chloronaphthalene (CN) is added. A strongly TQ1-enriched surface layer is formed in all TQ1:PC70BM blend films and rationalized by surface energy differences. The photocurrent and power conversion efficiency strongly increased upon the addition of CN, while the leakage current decreased by one to two orders of magnitude. The higher photocurrent correlates with the finer lateral structure and stronger TQ1-enrichment at the interface with the electron-collecting electrode. This indicates that the charge transport and collection are not hindered by this polymer-enriched surface layer. Neither the open-circuit voltage nor the series resistance of the devices are sensitive to the differences in morphology.« less

  17. Modeling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Permalink Wind Generator Modeling Computational Modeling & Simulation, Energy, Energy Surety, Grid Integration, Infrastructure Security, Modeling, Modeling & Analysis, News, News & Events, Renewable Energy, SMART Grid, Systems Analysis, Transmission Grid Integration, Wind Energy Wind Generator Modeling This modular block diagram represents the major components of the generic dynamic wind turbine generator models. Model blocks and parameters are used to represent the different wind

  18. Visual Sample Plan Version 7.0 User's Guide

    SciTech Connect (OSTI)

    Matzke, Brett D.; Newburn, Lisa LN; Hathaway, John E.; Bramer, Lisa M.; Wilson, John E.; Dowson, Scott T.; Sego, Landon H.; Pulsipher, Brent A.

    2014-03-01

    User's guide for VSP 7.0 This user's guide describes Visual Sample Plan (VSP) Version 7.0 and provides instructions for using the software. VSP selects the appropriate number and location of environmental samples to ensure that the results of statistical tests performed to provide input to risk decisions have the required confidence and performance. VSP Version 7.0 provides sample-size equations or algorithms needed by specific statistical tests appropriate for specific environmental sampling objectives. It also provides data quality assessment and statistical analysis functions to support evaluation of the data and determine whether the data support decisions regarding sites suspected of contamination. The easy-to-use program is highly visual and graphic. VSP runs on personal computers with Microsoft Windows operating systems (XP, Vista, Windows 7, and Windows 8). Designed primarily for project managers and users without expertise in statistics, VSP is applicable to two- and three-dimensional populations to be sampled (e.g., rooms and buildings, surface soil, a defined layer of subsurface soil, water bodies, and other similar applications) for studies of environmental quality. VSP is also applicable for designing sampling plans for assessing chem/rad/bio threat and hazard identification within rooms and buildings, and for designing geophysical surveys for unexploded ordnance (UXO) identification.

  19. Sandia Visualization Tools, version 2.2.5.

    Energy Science and Technology Software Center (OSTI)

    2010-01-19

    This is an update to the Sandia Advanced MEMS Design Tools 2.2. It replaces all previous versions. New features in this version: Updated AutoCAD macros to work with Microsoft Update KB960715. Added support for AutoCAD 2010. Added VBA files for 64-bit AutoCAD 2010. Added Hyperlinks to DRC result geometry. Added 48-pin module to CompLib. Changed FirstDRC to display error count and description. Updated lower case "x" char to eliminate false DRC errors. This CD containsmore » an integrated set of electronic files that: a) Describe the SUMMiT V fabrication process b) Provide enabling educational information (including pictures, videos, technical information) c) Facilitate the process of designing MEMS with the SUMMiT process (prototype file, Design Rule Checker, Standard Parts Library) d) Facilitate the process of having MEMS fabricated at Sandia National Laboratories e) Facilitate the process of having post-fabrication services performed. While there exists some files on the CD that are used in conjunction with software package AutoCAD, these files are not intended for use independent of the CD. Note that the customer must purchase his/her own copy of AutoCAD to use with these files.« less

  20. Ghrelin inhibits proliferation and increases T-type Ca{sup 2+} channel expression in PC-3 human prostate carcinoma cells

    SciTech Connect (OSTI)

    Diaz-Lezama, Nundehui; Hernandez-Elvira, Mariana; Sandoval, Alejandro; Monroy, Alma; Felix, Ricardo; Monjaraz, Eduardo

    2010-12-03

    Research highlights: {yields} Ghrelin decreases prostate carcinoma PC-3 cells proliferation. {yields} Ghrelin favors apoptosis in PC-3 cells. {yields} Ghrelin increase in intracellular free Ca{sup 2+} levels in PC-3 cells. {yields} Grelin up-regulates expression of T-type Ca{sup 2+} channels in PC-3 cells. {yields} PC-3 cells express T-channels of the Ca{sub V}3.1 and Ca{sub V}3.2 subtype. -- Abstract: Ghrelin is a multifunctional peptide hormone with roles in growth hormone release, food intake and cell proliferation. With ghrelin now recognized as important in neoplastic processes, the aim of this report is to present findings from a series of in vitro studies evaluating the cellular mechanisms involved in ghrelin regulation of proliferation in the PC-3 human prostate carcinoma cells. The results showed that ghrelin significantly decreased proliferation and induced apoptosis. Consistent with a role in apoptosis, an increase in intracellular free Ca{sup 2+} levels was observed in the ghrelin-treated cells, which was accompanied by up-regulated expression of T-type voltage-gated Ca{sup 2+} channels. Interestingly, T-channel antagonists were able to prevent the effects of ghrelin on cell proliferation. These results suggest that ghrelin inhibits proliferation and may promote apoptosis by regulating T-type Ca{sup 2+} channel expression.