National Library of Energy BETA

Sample records for model construction start

  1. DOE's Jefferson Lab Receives Approval To Start Construction of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE's Jefferson Lab Receives Approval To Start Construction of 310 Million Upgrade NEWPORT NEWS, Va., Sept. 15, 2008 - The U.S. Department of Energy's Thomas Jefferson National...

  2. Construction, Qualification, and Low Rate Production Start-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High Volume...

  3. Construction, Qualification, and Low Rate Production Start-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of a DC Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a...

  4. Data Modeling and Theory Construction

    E-Print Network [OSTI]

    Jan de Leeuw

    2011-01-01

    MODELING AND THEORY CONSTRUCTION F. Suppe. The Structure ofMODELING AND THEORY CONSTRUCTION JAN DE LEEUW This paper wasMODELING AND THEORY CONSTRUCTION F????? 1. The Scientist

  5. Starting laminar plumes: Comparison of laboratory and numerical modeling

    E-Print Network [OSTI]

    van Keken, Peter

    Starting laminar plumes: Comparison of laboratory and numerical modeling Judith Vatteville Institut, France (davaille@fast.u-psud.fr) [1] A detailed comparison of starting laminar plumes in viscous fluids. Davaille (2009), Starting laminar plumes: Comparison of laboratory and numerical modeling, Geochem. Geophys

  6. Modeling and cold start in alcohol-fueled engines

    SciTech Connect (OSTI)

    Markel, A.J.; Bailey, B.K.

    1998-05-01

    Neat alcohol fuels offer several benefits over conventional gasoline in automotive applications. However, their low vapor pressure and high heat of vaporization make it difficult to produce a flammable vapor composition from a neat alcohol fuel during a start under cold ambient conditions. Various methods have been introduced to compensate for this deficiency. In this study, the authors applied computer modeling and simulation to evaluate the potential of four cold-start technologies for engines fueled by near-neat alcohol. The four technologies were a rich combustor device, a partial oxidation reactor, a catalytic reformer, and an enhanced ignition system. The authors ranked the competing technologies by their ability to meet two primary criteria for cold starting an engine at {minus}25 deg C and also by several secondary parameters related to commercialization. Their analysis results suggest that of the four technologies evaluated, the enhanced ignition system is the best option for further development.

  7. Modeling Cold Start in a Polymer-Electrolyte Fuel Cell

    E-Print Network [OSTI]

    Balliet, Ryan

    2010-01-01

    of starting a cold PEFC . . . . . . . . . . . . . 1.2.3 Theand Design Parameters on PEFC Cold Start,” Journal of Powera) Expanded View of a single PEFC. (b) Cells arranged in a

  8. Modeling Cold Start in a Polymer-Electrolyte Fuel Cell

    E-Print Network [OSTI]

    Balliet, Ryan

    2010-01-01

    3.2.2.9 3.3 Cold—Start Simulation Transport of ions andperformance during cold start. Transport of water in thetransport overpotentials for the hydrogen electrode are neglected. Table 1.3: Automotive cold-

  9. Modeling Cold Start in a Polymer-Electrolyte Fuel Cell

    E-Print Network [OSTI]

    Balliet, Ryan

    2010-01-01

    Boundary conditions used for fuel—cell simulations. 3.12to the Problem of Cold Start 1.1 Polymer—Electrolyte Fuelin Polymer Electrolyte Fuel Cells — II. Parametric Study,”

  10. Numerical Model Construction with Closed Observables

    E-Print Network [OSTI]

    Felix Dietrich; Gerta Köster; Hans-Joachim Bungartz

    2015-10-18

    Performing analysis, optimization and control using simulations of many-particle systems is computationally demanding when no macroscopic model for the dynamics of the variables of interest is available. In case observations on the macroscopic scale can only be produced via legacy simulator code or live experiments, finding a model for these macroscopic variables is challenging. In this paper, we employ time-lagged embedding theory to construct macroscopic numerical models from output data of a black box, such as a simulator or live experiments. Since the state space variables of the constructed, coarse model are dynamically closed and observable by an observation function, we call these variables closed observables. The approach is an online-offline procedure, as model construction from observation data is performed offline and the new model can then be used in an online phase, independent of the original. We illustrate the theoretical findings with numerical models constructed from time series of a two-dimensional ordinary differential equation system, and from the density evolution of a transport-diffusion system. Applicability is demonstrated in a real-world example, where passengers leave a train and the macroscopic model for the density flow onto the platform is constructed with our approach. If only the macroscopic variables are of interest, simulation runtimes with the numerical model are three orders of magnitude lower compared to simulations with the original fine scale model. We conclude with a brief discussion of possibilities of numerical model construction in systematic upscaling, network optimization and uncertainty quantification.

  11. Construction and Evaluation of Actuarial Models Exam

    E-Print Network [OSTI]

    SOA USER

    2012-10-10

    The Construction and Evaluation of Actuarial Models exam is called Exam C by the SOA and. Exam 4 by the CAS. This three-and-a-half hour exam consists of ...

  12. Effectiveness of 4D construction modeling in detecting time-space conflicts of construction sites 

    E-Print Network [OSTI]

    Nigudkar, Narendra Shriniwas

    2005-11-01

    This research investigated whether 4D construction model effectively helps project participants on construction sites in detecting time-space conflicts in the schedule. Previous researchers on construction space management typically modeled space...

  13. Application of the cumulative risk model in predicting school readiness in Head Start children 

    E-Print Network [OSTI]

    Rodriguez-Escobar, Olga Lydia

    2009-05-15

    This study investigates the degree to which the cumulative risk index predicted school readiness in a Head Start population. In general, the reviewed studies indicated the cumulative risk model was efficacious in predicting adverse developmental...

  14. Comparisons of Statistical Modeling for Constructing Gene Regulatory

    E-Print Network [OSTI]

    Murphy, Kevin Patrick

    Comparisons of Statistical Modeling for Constructing Gene Regulatory Networks by Xiaohui Chen B. In this thesis, we compare a variety of existing regression models and apply them to construct regulatory network construction algorithm. Finally, we apply our models on a p53-related data set, NCI-60 data

  15. Journal of Power Sources 172 (2007) 816830 One-dimensional thermal model of cold-start in a polymer

    E-Print Network [OSTI]

    Mench, Matthew M.

    2007-01-01

    A transient, one-dimensional thermal model for a generic polymer electrolyte fuel cell (PEFC) stack; PEFC; Stack; Thermal model 1. Introduction The current state of fuel cell technology faces a number the internal combustion engine. Among those, cold-start (i.e. start-up of polymer elec- trolyte fuel cell (PEFC

  16. Algebraic constructive quantum field theory: Integrable models and deformation techniques

    E-Print Network [OSTI]

    Gandalf Lechner

    2015-03-12

    Several related operator-algebraic constructions for quantum field theory models on Minkowski spacetime are reviewed. The common theme of these constructions is that of a Borchers triple, capturing the structure of observables localized in a Rindler wedge. After reviewing the abstract setting, we discuss in this framework i) the construction of free field theories from standard pairs, ii) the inverse scattering construction of integrable QFT models on two-dimensional Minkowski space, and iii) the warped convolution deformation of QFT models in arbitrary dimension, inspired from non-commutative Minkowski space.

  17. Dynamic competition model for construction contractors 

    E-Print Network [OSTI]

    Kim, Hyung Jin

    2004-01-01

    as an entity in a dynamic system, in which every entity is a profit optimizer responding to market conditions as well as its competitors' actions. In construction, the issue of competition has been focused on competitive bidding, which is a critical mechanism...

  18. Construction

    Broader source: Energy.gov [DOE]

    Learn about the energy-efficient construction projects that are saving businesses and communities money while creating jobs.

  19. Construction Logistics Improvements using the SCOR model Tornet Case

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Construction Logistics Improvements using the SCOR model ­Tornet Case Fredrik Persson1 , Jonas are emerging that leads to cost reductions in construction. In this strive towards improvement, logistics on cost savings from the logistics perspective in different areas of the logistic system. Keywords

  20. Start-to-end modelling of a mode-locked optical klystron free electron laser amplifier

    SciTech Connect (OSTI)

    Dunning, D. J.; Thompson, N. R. [University of Strathclyde (SUPA), Glasgow G4 0NG (United Kingdom); ASTeC, Daresbury Laboratory, Warrington WA4 4AD (United Kingdom); Mc Neil, B. W. J. [University of Strathclyde (SUPA), Glasgow G4 0NG (United Kingdom); Williams, P. H. [ASTeC, Daresbury Laboratory, Warrington WA4 4AD (United Kingdom)

    2011-07-15

    A free electron laser (FEL) in a mode-locked optical klystron (MLOK) configuration is modelled using start-to-end simulations that simulate realistic electron beam acceleration and transport before input into a full three-dimensional FEL simulation code. These simulations demonstrate that the MLOK scheme is compatible with the present generation of radiofrequency accelerator designs. A train of few-optical cycle pulses is predicted with peak powers similar to those of the equivalent conventional FEL amplifier. The role of electron beam energy modulation in these results is explained and the limitations of some simulation codes discussed. It is shown how seeding the FEL interaction using a High Harmonic seed laser can improve the coherence properties of the output.

  1. Constructing Bayesiannetwork Models of Software Testing and Maintenance Uncertainties

    E-Print Network [OSTI]

    Ziv, Hadar

    Constructing Bayesian­network Models of Software Testing and Maintenance Uncertainties To appear, Software requirements, Software test­ ing, Software maintenance 1 #12; 1 Introduction Development­to­market constraints. In real­life software projects, testing is often done after coding is complete, does

  2. A Multiphase Model for Cold Start of Polymer Electrolyte Fuel Leng Mao, Chao-Yang Wang,*,z

    E-Print Network [OSTI]

    interactions. The governing equations of mass, momentum, species, heat, and charge transport under coldA Multiphase Model for Cold Start of Polymer Electrolyte Fuel Cells Leng Mao, Chao-Yang Wang is presented to describe transport and electrochemical processes with ice formation during startup of polymer

  3. Identification of slow molecular order parameters for Markov model construction

    E-Print Network [OSTI]

    Perez-Hernandez, Guillermo; Giorgino, Toni; de Fabritiis, Gianni; Noé, Frank

    2013-01-01

    A goal in the kinetic characterization of a macromolecular system is the description of its slow relaxation processes, involving (i) identification of the structural changes involved in these processes, and (ii) estimation of the rates or timescales at which these slow processes occur. Most of the approaches to this task, including Markov models, Master-equation models, and kinetic network models, start by discretizing the high-dimensional state space and then characterize relaxation processes in terms of the eigenvectors and eigenvalues of a discrete transition matrix. The practical success of such an approach depends very much on the ability to finely discretize the slow order parameters. How can this task be achieved in a high-dimensional configuration space without relying on subjective guesses of the slow order parameters? In this paper, we use the variational principle of conformation dynamics to derive an optimal way of identifying the "slow subspace" of a large set of prior order parameters - either g...

  4. A probabilistic graphical model based stochastic input model construction

    SciTech Connect (OSTI)

    Wan, Jiang [Materials Process Design and Control Laboratory, Sibley School of Mechanical and Aerospace Engineering, 101 Frank H.T. Rhodes Hall, Cornell University, Ithaca, NY 14853-3801 (United States); Zabaras, Nicholas, E-mail: nzabaras@gmail.com [Materials Process Design and Control Laboratory, Sibley School of Mechanical and Aerospace Engineering, 101 Frank H.T. Rhodes Hall, Cornell University, Ithaca, NY 14853-3801 (United States); Center for Applied Mathematics, 657 Frank H.T. Rhodes Hall, Cornell University, Ithaca, NY 14853-3801 (United States)

    2014-09-01

    Model reduction techniques have been widely used in modeling of high-dimensional stochastic input in uncertainty quantification tasks. However, the probabilistic modeling of random variables projected into reduced-order spaces presents a number of computational challenges. Due to the curse of dimensionality, the underlying dependence relationships between these random variables are difficult to capture. In this work, a probabilistic graphical model based approach is employed to learn the dependence by running a number of conditional independence tests using observation data. Thus a probabilistic model of the joint PDF is obtained and the PDF is factorized into a set of conditional distributions based on the dependence structure of the variables. The estimation of the joint PDF from data is then transformed to estimating conditional distributions under reduced dimensions. To improve the computational efficiency, a polynomial chaos expansion is further applied to represent the random field in terms of a set of standard random variables. This technique is combined with both linear and nonlinear model reduction methods. Numerical examples are presented to demonstrate the accuracy and efficiency of the probabilistic graphical model based stochastic input models. - Highlights: • Data-driven stochastic input models without the assumption of independence of the reduced random variables. • The problem is transformed to a Bayesian network structure learning problem. • Examples are given in flows in random media.

  5. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePageStarted Getting Started

  6. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePageStarted GettingStarted

  7. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePageStartedStarted Getting

  8. Construction of a driver-vehicle model and identification of the driver model parameters 

    E-Print Network [OSTI]

    Su, Jemeng

    1981-01-01

    CONSTRUCTION OF A DRIVER-VEHICLE MODEL AND IDENTIFICATION OF THE DRIVER MODEL PARAMETERS A Thesis by , JEMENG SU Submitted to the Graduate College of Texas A8M University in partial fulfillment of the requiremr nt for the degree of MASTER... OF SCIENCE December 1981 Major Subject: Mechanical Engineering CONSTRUCTION OF A DRIVER-VEHICLE MODEL AND IDENTIFICATION OF THE DRIVER MODEL PARAMETERS A Thesis by JEMENG SU Approved as to style and content by: (Chairman of Committe ) / I...

  9. Automatic Construction of Anomaly Detectors from Graphical Models

    SciTech Connect (OSTI)

    Ferragut, Erik M [ORNL; Darmon, David M [ORNL; Shue, Craig A [ORNL; Kelley, Stephen [ORNL

    2011-01-01

    Detection of rare or previously unseen attacks in cyber security presents a central challenge: how does one search for a sufficiently wide variety of types of anomalies and yet allow the process to scale to increasingly complex data? In particular, creating each anomaly detector manually and training each one separately presents untenable strains on both human and computer resources. In this paper we propose a systematic method for constructing a potentially very large number of complementary anomaly detectors from a single probabilistic model of the data. Only one model needs to be trained, but numerous detectors can then be implemented. This approach promises to scale better than manual methods to the complex heterogeneity of real-life data. As an example, we develop a Latent Dirichlet Allocation probability model of TCP connections entering Oak Ridge National Laboratory. We show that several detectors can be automatically constructed from the model and will provide anomaly detection at flow, sub-flow, and host (both server and client) levels. This demonstrates how the fundamental connection between anomaly detection and probabilistic modeling can be exploited to develop more robust operational solutions.

  10. Genealogical constructions of population models Alison M. Etheridge Thomas G. Kurtz

    E-Print Network [OSTI]

    Kurtz, Tom

    Genealogical constructions of population models Alison M. Etheridge Thomas G. Kurtz Department, Moran model, lookdown construction, genealogies, voter model, generators, stochastic equations, Lambda number of individuals in the population is used to infer the `genealogical trees' that relate those genes

  11. What are the Starting Points? Evaluating Base-Year Assumptions in the Asian Modeling Exercise

    SciTech Connect (OSTI)

    Chaturvedi, Vaibhav; Waldhoff, Stephanie; Clarke, Leon E.; Fujimori, Shinichiro

    2012-12-01

    A common feature of model inter-comparison efforts is that the base year numbers for important parameters such as population and GDP can differ substantially across models. This paper explores the sources and implications of this variation in Asian countries across the models participating in the Asian Modeling Exercise (AME). Because the models do not all have a common base year, each team was required to provide data for 2005 for comparison purposes. This paper compares the year 2005 information for different models, noting the degree of variation in important parameters, including population, GDP, primary energy, electricity, and CO2 emissions. It then explores the difference in these key parameters across different sources of base-year information. The analysis confirms that the sources provide different values for many key parameters. This variation across data sources and additional reasons why models might provide different base-year numbers, including differences in regional definitions, differences in model base year, and differences in GDP transformation methodologies, are then discussed in the context of the AME scenarios. Finally, the paper explores the implications of base-year variation on long-term model results.

  12. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePageStarted Getting

  13. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePageStarted

  14. Getting started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunitiesNERSC Getting Started at NERSC June 7,Getting

  15. Getting started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunitiesNERSC Getting Started at NERSC June 7,GettingGetting

  16. START: Status and Region Aware Taxi Mobility Model for Urban Vehicular Networks

    E-Print Network [OSTI]

    Wang, Yu

    networks [1]­[3] play a critical role in building smart cities and supporting comprehensive urban, and other important tasks of smart cities. Mobility models for mobile networks [4], [5] have been well

  17. Construction of energy-stable Galerkin reduced order models.

    SciTech Connect (OSTI)

    Kalashnikova, Irina; Barone, Matthew Franklin; Arunajatesan, Srinivasan; van Bloemen Waanders, Bart Gustaaf

    2013-05-01

    This report aims to unify several approaches for building stable projection-based reduced order models (ROMs). Attention is focused on linear time-invariant (LTI) systems. The model reduction procedure consists of two steps: the computation of a reduced basis, and the projection of the governing partial differential equations (PDEs) onto this reduced basis. Two kinds of reduced bases are considered: the proper orthogonal decomposition (POD) basis and the balanced truncation basis. The projection step of the model reduction can be done in two ways: via continuous projection or via discrete projection. First, an approach for building energy-stable Galerkin ROMs for linear hyperbolic or incompletely parabolic systems of PDEs using continuous projection is proposed. The idea is to apply to the set of PDEs a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The resulting ROM will be energy-stable for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special weighted L2 inner product, termed the %E2%80%9Csymmetry inner product%E2%80%9D. Attention is then turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, a weighted L2 inner product termed the %E2%80%9CLyapunov inner product%E2%80%9D, is derived. The weighting matrix that defines the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system arising from the discretization of a system of PDEs in space. It is shown that a ROM constructed via discrete projection using the Lyapunov inner product will be energy-stable for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. Comparisons are also made between the symmetry inner product and the Lyapunov inner product. The performance of ROMs constructed using these inner products is evaluated on several benchmark test cases.

  18. Modeling cost and time uncertainty in rail line construction

    E-Print Network [OSTI]

    Moret, Yvonne

    2011-01-01

    Transportation construction projects are often plagued by cost overruns and delays. Technical, economic-political, psychological, and legal causes explain the frequent underestimations. To counteract such underestimations, ...

  19. 1 Imbedded Heat Pipe Prototype Modelling, Design, and Construction for Particle Ac-

    E-Print Network [OSTI]

    Cinabro, David

    1 Imbedded Heat Pipe Prototype Modelling, Design, and Construction for Particle Ac- celerator for predicting heat pipe performance has been generated and a design based on the results of that model has been implemented. A prototype heat pipe is under construction to test the validity of the model. The prototype

  20. Constructing Irregular Surfaces to Enclose Macromolecular Complexes for Mesoscale Modeling Using the Discrete

    E-Print Network [OSTI]

    Schlick, Tamar

    Constructing Irregular Surfaces to Enclose Macromolecular Complexes for Mesoscale Modeling Using proteins. DiSCO is generally applicable to other interesting macromolecular systems for which mesoscale

  1. Adaptive CAD model (re)construction with THBsplines Gabor Kissa,

    E-Print Network [OSTI]

    Jüttler, Bert

    ", Universit`a degli Studi di Firenze, Italy cMTU Aero Engines AG, Munich, Germany Abstract Computer Aided­)construction of critical turbine blade parts. Furthermore, the local THB­spline evaluation in terms of B­spline patches can B-splines, adaptive refinement, CAD interfaces, turbine blades. 1. Introduction Computer Aided

  2. Assessing the cumulative environmental impact of hydropower construction on river systems based on energy network model

    E-Print Network [OSTI]

    Fath, Brian D.

    Assessing the cumulative environmental impact of hydropower construction on river systems based 2014 Keywords: Hydropower construction Sustainable energy development Environmental impact assessment Energy network model a b s t r a c t Hydropower is the major renewable energy source for many nations

  3. CONSTRUCTION OF COST-EFFICIENT SELF-QUANTO CALLS AND PUTS IN EXPONENTIAL L EVY MODELS

    E-Print Network [OSTI]

    Rüschendorf, Ludger

    martingale measure. Whereas the construction and evaluation of the efficient self- quanto call these difficulties and arrive at numerically tractable expressions. The potential savings of the cost-efficientCONSTRUCTION OF COST-EFFICIENT SELF-QUANTO CALLS AND PUTS IN EXPONENTIAL L ´EVY MODELS Ernst August

  4. Thermal mass performance in residential construction : an energy analysis using a cube model

    E-Print Network [OSTI]

    Ledwith, Alison C. (Alison Catherine)

    2012-01-01

    Given the pervasiveness of energy efficiency concerns in the built environment, this research aims to answer key questions regarding the performance of thermal mass construction. The work presents the Cube Model, a simplified ...

  5. The decision-making modeling for concurrent planning of construction projects 

    E-Print Network [OSTI]

    Shim, Euysup

    2009-05-15

    conditions. Furthermore, the model was applied to a hypothetical construction project. From the simulations the major conclusions include: (1) The decentralized approach becomes preferred with more activities; (2) Considering more methods provides more...

  6. Efficient ray tracing algorithms based on wavefront construction and model based interpolation method 

    E-Print Network [OSTI]

    Lee, Kyoung-Jin

    2006-08-16

    Understanding and modeling seismic wave propagation is important in regional and exploration seismology. Ray tracing is a powerful and popular method for this purpose. Wavefront construction (WFC) method handles wavefronts ...

  7. An examination of the construct validity of predictors of productive and counterproductive job performance using structural equation modeling 

    E-Print Network [OSTI]

    Tice, Julie Anne Goodwin

    1996-01-01

    This research used structural equation modeling to test the construct validity of measures I I ion, and work of four global constructs: trait socialization, self-concept, organizational socialization' concept. Using measurement model procedures...

  8. Generalized Algorithms for Constructing Statistical Language Models Cyril Allauzen, Mehryar Mohri, Brian Roark

    E-Print Network [OSTI]

    Allauzen, Cyril

    applications or for adaptation purposes, one often needs to construct a language model based on the out- put library for language modeling, the GRM Library, that includes many other text and grammar processing classification. In all cases, a language model is used in combination with other in- formation sources to rank

  9. Generalized Algorithms for Constructing Statistical Language Models Cyril Allauzen, Mehryar Mohri, Brian Roark

    E-Print Network [OSTI]

    Mohri, Mehryar

    applications or for adaptation purposes, one often needs to construct a language model based on the out­ put has been incorporated in a general software library for language modeling, the GRM Library, information extraction, machine translation, or document classification. In all cases, a language model

  10. Discovering Block-Structured Process Models From Event Logs -A Constructive Approach

    E-Print Network [OSTI]

    van der Aalst, Wil

    Discovering Block-Structured Process Models From Event Logs - A Constructive Approach S University of Technology, P.O. Box 513, NL-5600 MB, Eindhoven, The Netherlands Abstract Process discovery is the problem of, given a log of observed behaviour, finding a process model that `best' describes

  11. Self-Constructive High-Rate System Energy Modeling for Battery-Powered Mobile Systems

    E-Print Network [OSTI]

    Zhong, Lin

    of a system in the lab using high quality external power measurements. Such methods are not only laborSelf-Constructive High-Rate System Energy Modeling for Battery-Powered Mobile Systems Mian Dong, low power, mobile systems 1. Introduction An energy model estimates the energy consumption by a mobile

  12. Getting Started on Carver

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting Started Getting Started Logging in In order to follow this page, you will need an account, a username and a password. If you do not have all of these things please visit...

  13. A Neural Network Model for Construction Projects Site Overhead Cost Estimating in Egypt

    E-Print Network [OSTI]

    ElSawy, Ismaail; Razek, Mohammed Abdel

    2011-01-01

    Estimating of the overhead costs of building construction projects is an important task in the management of these projects. The quality of construction management depends heavily on their accurate cost estimation. Construction costs prediction is a very difficult and sophisticated task especially when using manual calculation methods. This paper uses Artificial Neural Network (ANN) approach to develop a parametric cost-estimating model for site overhead cost in Egypt. Fifty-two actual real-life cases of building projects constructed in Egypt during the seven year period 2002-2009 were used as training materials. The neural network architecture is presented for the estimation of the site overhead costs as a percentage from the total project price.

  14. Constructing Bayesian-network Models of Software Testing and Maintenance Uncertainties

    E-Print Network [OSTI]

    Ziv, Hadar

    Constructing Bayesian-network Models of Software Testing and Maintenance Uncertainties-lived software, requirements are analyzed and speci ed, designs and code modules are developed, test- ing, Software testing, Software maintenance 1 #12;1 Introduction Development of complex software is fraught

  15. A Simplified Multivariate Markov Chain Model for the Construction and Control of Genetic Regulatory

    E-Print Network [OSTI]

    Chan, Raymond

    networks, linear model, Bayesian networks, non-linear ordinary differential equations, Petri nets, Boolean Networks Shu-Qin Zhang School of Mathematical Sciences, Fudan University, Shanghai,200433, China E-mail:rchan@math.cuhk.edu.hk Abstract--The construction and control of genetic regulatory networks using gene expression data

  16. Construction of a Mechanical Model for the Expansion of a Virus

    E-Print Network [OSTI]

    Guest, Simon

    Construction of a Mechanical Model for the Expansion of a Virus S.D. Guest1 , F. Kovács2 , T@eng.cam.ac.uk, fax +44 1223 332662 Abstract Many viruses have an outer protein coat with the structure of a truncated icosahedron, and can expand following changes to the environment around the virus. The protein coat consists

  17. Efficient Smoothing and Interpolation of Velocity Models for Seismic Wavefront Construction Algorithms 

    E-Print Network [OSTI]

    Chen, Bo

    2012-10-19

    The wavefront construction (WFC) method is an effective tool to compute seismic ray fields and has wide applications. This paper applies the WFC method to a heterogeneous earth model represented as a 3-D grid instead of a sequence of smooth layers...

  18. A Plutonium Finishing Plant Model for the Cercla Removal Action and Decommissioning Construction Final Report

    SciTech Connect (OSTI)

    Hopkins, A. [Fluor Hanford, Inc, Richland, WA (United States)

    2008-07-01

    The joint policy between the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE) for decommissioning buildings at DOE facilities documents an agreement between the agencies to perform decommissioning activities including demolition under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). The use of removal actions for decommissioning integrates EPA oversight authority, DOE lead agency responsibility, and state authority for decommissioning activities. Once removal actions have been performed under CERCLA, a construction completion report is required to document the completion of the required action. Additionally, a decommissioning report is required under DOE guidance. No direct guidance was found for documenting completion of decommissioning activities and preparing a final report that satisfies the CERCLA requirements and the DOE requirements for decommissioning. Additional guidance was needed for the documentation of construction completion under CERCLA for D and D projects undertaken under the joint policy that addresses the requirements of both agencies. A model for the construction completion report was developed to document construction completion for CERCLA D and D activities performed under the joint EPA/DOE policy at the Plutonium Finishing Plant (PFP). The model documentation report developed at PFP integrates the DOE requirements for establishing decommissioning end-points, documenting end-point completion and preparing a final decommissioning report with the CERCLA requirements to document completion of the action identified in the Action Memorandum (AM). The model includes the required information on health and safety, data management, cost and schedule and end-points completion. (authors)

  19. Constructing de Sitter vacua in no-scale string models without uplifting

    E-Print Network [OSTI]

    Laura Covi; Marta Gomez-Reino; Christian Gross; Gonzalo A. Palma; Claudio A. Scrucca

    2009-03-10

    We develop a method for constructing metastable de Sitter vacua in N=1 supergravity models describing the no-scale volume moduli sector of Calabi-Yau string compactifications. We consider both heterotic and orientifold models. Our main guideline is the necessary condition for the existence of metastable vacua coming from the Goldstino multiplet, which constrains the allowed scalar geometries and supersymmetry-breaking directions. In the simplest non-trivial case where the volume is controlled by two moduli, this condition simplifies and turns out to be fully characterised by the intersection numbers of the Calabi-Yau manifold. We analyse this case in detail and show that once the metastability condition is satisfied it is possible to reconstruct in a systematic way the local form of the superpotential that is needed to stabilise all the fields. We apply then this procedure to construct some examples of models where the superpotential takes a realistic form allowed by flux backgrounds and gaugino condensation effects, for which a viable vacuum arises without the need of invoking corrections to the Kahler potential breaking the no-scale property or uplifting terms. We finally discuss the prospects of constructing potentially realistic models along these lines.

  20. A New, Stochastic, Energy Model of the U.S. is Under Construction: SEDS and Its Industrial Structure 

    E-Print Network [OSTI]

    Roop, J. M.

    2009-01-01

    "A new energy model for the United States is currently being constructed by staff at five National Laboratories for the Office of Energy Efficiency and Renewable Energy at the Department of Energy. This new model, SEDS (Stochastic Energy Deployment...

  1. Getting Started at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePageStartedStartedNERSC

  2. Getting Started on Edison

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunitiesNERSC Getting Started at NERSC June 7, 2011Started

  3. Graybox and adaptative dynamic neural network identification models to infer the steady state efficiency of solar thermal collectors starting from the transient condition

    SciTech Connect (OSTI)

    Roberto, Baccoli; Ubaldo, Carlini; Stefano, Mariotti; Roberto, Innamorati; Elisa, Solinas; Paolo, Mura

    2010-06-15

    This paper deals with the development of methods for non steady state test of solar thermal collectors. Our goal is to infer performances in steady-state conditions in terms of the efficiency curve when measures in transient conditions are the only ones available. We take into consideration the method of identification of a system in dynamic conditions by applying a Graybox Identification Model and a Dynamic Adaptative Linear Neural Network (ALNN) model. The study targets the solar collector with evacuated pipes, such as Dewar pipes. The mathematical description that supervises the functioning of the solar collector in transient conditions is developed using the equation of the energy balance, with the aim of determining the order and architecture of the two models. The input and output vectors of the two models are constructed, considering the measures of 4 days of solar radiation, flow mass, environment and heat-transfer fluid temperature in the inlet and outlet from the thermal solar collector. The efficiency curves derived from the two models are detected in correspondence to the test and validation points. The two synthetic simulated efficiency curves are compared with the actual efficiency curve certified by the Swiss Institute Solartechnik Puffung Forschung which tested the solar collector performance in steady-state conditions according to the UNI-EN 12975 standard. An acquisition set of measurements of only 4 days in the transient condition was enough to trace through a Graybox State Space Model the efficiency curve of the tested solar thermal collector, with a relative error of synthetic values with respect to efficiency certified by SPF, lower than 0.5%, while with the ALNN model the error is lower than 2.2% with respect to certified one. (author)

  4. Starting an Investment Club 

    E-Print Network [OSTI]

    Johnson, Jason; Thompson, Bill; Polk, Wade

    2002-08-12

    An investment club is a group of people who learn about investments together and pool their money to purchase stocks or bonds. Learn how to start such a club, how to manage the tax aspects of joint investments, and how to benefit from club...

  5. PAINTING CHECKLIST GETTING STARTED

    E-Print Network [OSTI]

    Peters, Richard

    PAINTING CHECKLIST GETTING STARTED o Choose your colour scheme o Test colours using sample pots o Measure the area to be painted · Choose paint finish, matt, semi-gloss, gloss etc · Type of paint to use, water-based etc · State of repair of current surface · Painting over oil-based/gloss paint or wallpaper

  6. Verifying the INF and START treaties

    SciTech Connect (OSTI)

    Ifft, Edward [School of Foreign Service, Georgetown University, Washington, DC 20057 (United States)

    2014-05-09

    The INF and START Treaties form the basis for constraints on nuclear weapons. Their verification provisions are one of the great success stories of modern arms control and will be an important part of the foundation upon which the verification regime for further constraints on nuclear weapons will be constructed.

  7. Tsunami inundation modeling in constructed environments: A physical and numerical comparison of free-surface elevation, velocity, and momentum flux

    E-Print Network [OSTI]

    Lynett, Patrick

    Tsunami inundation modeling in constructed environments: A physical and numerical comparison April 2013 Available online 17 May 2013 Keywords: Tsunami Inundation Macro-roughness Benchmark COULWAVE Friction factor A laboratory benchmark test for tsunami inundation through an urban waterfront including

  8. Getting Started at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunitiesNERSC Getting Started at NERSC June 7, 2011 gerbyao

  9. Starting of turbine engines

    SciTech Connect (OSTI)

    Shekleton, J.R.

    1990-05-01

    This patent describes a relatively small turbine engine. It comprises: a rotary turbine wheel; a rotary compressor coupled to the turbine wheel; an annular combustor for receiving air from the compressor and fuel from a fuel source combusting the same and providing gases of combustion to the turbine wheel to drive the same; substantially identical main fuel injectors including fuel injecting nozzles angularly spaced about the compressor; fuel and air from the compressor being introduced into the combustor generally in the tangential direction; a fuel pump; a control schedule valve; and first and second main fuel solenoid valves. The first valve being operable to connect a minority of the injectors to the control schedule valve and the fuel pump for starting the engine, there being an even number of the injectors and the minority of injectors consisting of two diametrically opposite injectors; the first and second valves being operable to connect all of the injectors to the control schedule valve and the pump for causing normal operation of the engine; the engine further being characterized by the absence of start fuel injectors for the combustor.

  10. IEEE TRANSACTIONS ON MAGNETICS, VOL. 45, NO. 12, DECEMBER 2009 5399 Modeling of the Starting Performance of Large Solid-Pole Synchronous

    E-Print Network [OSTI]

    Mi, Chunting "Chris"

    refineries, steel mills, and power plants [1]­[6]. Large solid pole motors are a special category of large virtual windings. Therefore, the two-axis theory can be used for the solid pole synchronous motor. We, starting performance, transformation coefficient, two-axis theory, virtual windings. I. INTRODUCTION LARGE

  11. Sacks R. (1998), `Issues in the Development and Implementation of a Building Project Model for an Automated Building System', International Journal of Construction Information Technology, Salford University, Salford

    E-Print Network [OSTI]

    Sacks, Rafael

    1998-01-01

    of an Automated, Computer Integrated Building Realization System is to automatically generate all. Keywords: Building Project Model, Computer Integrated Construction, Automated Building System. INTRODUCTION for an Automated Building System', International Journal of Construction Information Technology, Salford University

  12. A Recipe for Constructing Exactly Soluble Lattice Models with Gauge and Matter Fields in One and Two Dimensions

    E-Print Network [OSTI]

    Ferreira, Miguel Jorge Bernabé; Padmanabhan, Pramod; Sobrinho, Paulo Teôtonio

    2015-01-01

    State sum models can be used to obtain partition functions of physical systems in various dimensions. Their construction proceeds by associating local tensors or weights to different parts of a closed triangulated manifold. One such approach is the Kuperberg's algorithm for finding 3-manifold invariants. In terms of physics an analogous construction results in the partition functions of three dimensional lattice gauge theories based on involutory Hopf algebras $\\mathcal{A}$. For the familiar case of group algebras we obtain the partition functions of lattice gauge theories. Here we extend this construction to one with gauge and matter fields in two and three dimensions. The additional ingredients are the matter fields located on the vertices which are acted upon by the gauge fields living on the edges. The matter fields correspond to Potts spin configurations. They can be described by a vector space, carrying the representation of the gauge fields, with an inner product. Performing this construction on a tria...

  13. On the separability of the extended molecule: Constructing the best localized molecular orbitals for an organic molecule bridging two model electrodes

    SciTech Connect (OSTI)

    Moreira, Rodrigo A.; Melo, Celso P. de

    2014-09-28

    Based on a quantum chemical valence formalism that allows the rigorous construction of best-localized molecular orbitals on specific parts of an extended system, we examined the separability of individual components of model systems relevant to the description of electron transport in molecular devices. We started by examining how to construct the maximally localized electronic density at the tip of a realistic model of a gold electrode. By varying the number of gold atoms included in the local region where to project the total electronic density, we quantitatively assess how many molecular orbitals are entirely localized in that region. We then considered a 1,4-benzene-di-thiol molecule connected to two model gold electrodes and examined how to localize the electronic density of the total system in the extended molecule, a fractional entity comprising the organic molecule plus an increasing number of the closest metal atoms. We were able to identify in a rigorous manner the existence of three physically different electronic populations, each one corresponding to a distinct set of molecular orbitals. First, there are those entirely localized in the extended molecule, then there is a second group of those completely distributed in the gold atoms external to that region, and, finally, there are those delocalized over the entire system. This latter group can be associated to the shared electronic population between the extended molecule and the rest of the system. We suggest that the treatment here presented could be useful in the theoretical analysis of the electronic transport in nanodevices whenever the use of localized molecular states are required by the physics of the specific problem, such as in cases of weak coupling and super-exchange limits.

  14. New Jersey SmartStart Buildings - New Construction and Retrofits |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOEDepartmentNew Jersey is home to energy-intensiveof

  15. A Local Ensemble Prediction System for Fog and Low Clouds: Construction, Bayesian Model Averaging Calibration, and Validation

    E-Print Network [OSTI]

    A Local Ensemble Prediction System for Fog and Low Clouds: Construction, Bayesian Model Averaging. Meteorologists face the challenge of supplying airport authorities with accurate forecasts of fog and cloud during their life cycle. To obtain accurate forecasts of fog and low clouds, the Code de Brouillard à l

  16. VIP-MAN: AN IMAGE-BASED WHOLE-BODY ADULT MALE MODEL CONSTRUCTED FROM COLOR PHOTOGRAPHS OF

    E-Print Network [OSTI]

    Duncan, James S.

    -Man, this article provides detailed information about how to construct an image-based model, as well as how to adopt physics (radiation protection) relies largely on a few sets of basic organ dosimetric quantities then * Nuclear Engineering and Engineering Physics Programs, NES Building, Tibbits Avenue, Rensselaer Polytechnic

  17. PSNH- Municipal Smart Start Program

    Broader source: Energy.gov [DOE]

    Public Service of New Hampshire (PSNH), an electric utility, offers the Smart Start Program to Municipal customers. This program assists municipalities in reducing energy consumption and electric...

  18. Portuguese refiner starts up new gasoline complex

    SciTech Connect (OSTI)

    Not Available

    1995-03-13

    Petroleos de Portugal S.A. (Petrogal) has started up a new $85 million gasoline complex at its Sines, Portugal, refinery. The complex includes HF alkylation and Hydrisom units. The refinery also has completed an overall $650 million upgrade that includes a new visbreaker and vacuum column. Petrogal says the project has increased gasoline production to about 30,000 b/d. Major units constructed for the overall refinery expansion included: a 35,000 b/sd FCCU; a 26,000 b/sd visbreaker; a 45,000 b/sd vacuum distillation unit; two extractive mercaptan columns; an amylene treater; a sulfur-recovery system; and an 8,000 b/sd alkylation complex. The paper describes the gasoline complex, laboratory, safety, control room operation, and start-up.

  19. Research Services START UP FUNDS

    E-Print Network [OSTI]

    Calgary, University of

    Research Services START UP FUNDS www.ucalgary.ca/research START UP FUNDS From time to time some of their research program. The nature of the grants can vary. For example, some grants are discretionary allowing the researcher to use the funds for a wide variety of activities such as travel, office furniture, students

  20. Modeling the costs and benefits of dam construction from a multidisciplinary perspective

    E-Print Network [OSTI]

    Tullos, Desiree

    - over, new dams continue to be planned and constructed in many developing countries. The checkered for electricity, recent experience has shown that many dams have serious negative environmental, human contributed to human development by providing reliable sources of drinking water and irrigation, hydropower

  1. Getting Started Videoconferences | Argonne Leadership Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting Started Videoconferences Start Date: Jun 25 2015 - 9:00am Location: Argonne National Laboratory Event Website: https:www.alcf.anl.govworkshopsgetting-started-videoconfe...

  2. Getting Started and Optimization Strategy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    you started thinking about how to optimize your application for the Knights Landing Architecture that will be on Cori. This page will walk you through the high level steps and give...

  3. START Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesA TokenCommercial BuildingsSTART Program START

  4. Project Construction

    Broader source: Energy.gov [DOE]

    Integrating renewable energy into Federal new construction or major renovations requires effective structuring of the construction team and project schedule. This overview discusses key construction team considerations for renewable energy as well as timing and expectations for the construction phase. The project construction phase begins after a project is completely designed and the construction documents (100%) have been issued. Construction team skills and experience with renewable energy technologies are crucial during construction, as is how the integration of renewable energy affects the project construction schedule.

  5. Constructing a GIS-based 3D urban model using LiDAR and aerial photographs 

    E-Print Network [OSTI]

    Lin, Wei-Ming

    2005-02-17

    Due to the increasing availability of high-resolution remotely sensed imagery and detailed terrain surface elevation models, urban planners and municipal managers can now model and visualize the urban space in ...

  6. Phosphorus water quality model evaluation and comparison for natural and constructed wetlands 

    E-Print Network [OSTI]

    Paasch, Mary Margaret

    1998-01-01

    model, and the detailed ecosystem model, were evaluated at three wetland sites across the U.S. The three sites included: Boney Marsh Experimental Area, Florida; Jackson Bottom Experimental Wetlands, Oregon; and the Des Plaines River Wetland Demonstration...

  7. System for conversion between the boundary representation model and a constructive solid geometry model of an object

    DOE Patents [OSTI]

    Christensen, Noel C. (Kansas City, MO); Emery, James D. (Kansas City, MO); Smith, Maurice L. (Kansas City, MO)

    1988-04-05

    A system converts from the boundary representation of an object to the constructive solid geometry representation thereof. The system converts the boundary representation of the object into elemental atomic geometrical units or I-bodies which are in the shape of stock primitives or regularized intersections of stock primitives. These elemental atomic geometrical units are then represented in symbolic form. The symbolic representations of the elemental atomic geometrical units are then assembled heuristically to form a constructive solid geometry representation of the object usable for manufacturing thereof. Artificial intelligence is used to determine the best constructive solid geometry representation from the boundary representation of the object. Heuristic criteria are adapted to the manufacturing environment for which the device is to be utilized. The surface finish, tolerance, and other information associated with each surface of the boundary representation of the object are mapped onto the constructive solid geometry representation of the object to produce an enhanced solid geometry representation, particularly useful for computer-aided manufacture of the object.

  8. System for conversion between the boundary representation model and a constructive solid geometry model of an object

    DOE Patents [OSTI]

    Christensen, N.C.; Emery, J.D.; Smith, M.L.

    1985-04-29

    A system converts from the boundary representation of an object to the constructive solid geometry representation thereof. The system converts the boundary representation of the object into elemental atomic geometrical units or I-bodies which are in the shape of stock primitives or regularized intersections of stock primitives. These elemental atomic geometrical units are then represented in symbolic form. The symbolic representations of the elemental atomic geometrical units are then assembled heuristically to form a constructive solid geometry representation of the object usable for manufacturing thereof. Artificial intelligence is used to determine the best constructive solid geometry representation from the boundary representation of the object. Heuristic criteria are adapted to the manufacturing environment for which the device is to be utilized. The surface finish, tolerance, and other information associated with each surface of the boundary representation of the object are mapped onto the constructive solid geometry representation of the object to produce an enhanced solid geometry representation, particularly useful for computer-aided manufacture of the object. 19 figs.

  9. For what number of cars must self organization occur in the Biham-Middleton-Levine traffic model from any possible starting configuration?

    E-Print Network [OSTI]

    Tim D. Austin; Itai Benjamini

    2006-08-22

    For any initial configuration of fewer than N/2 cars the BML model will self organize to attain speed one. On the other hand, there is a configuration of size m in which no car can move if and only if m is at least 2N.

  10. What is TCP optimizing? In order to understand what TCP is optimizing, let us start with a model for the following

    E-Print Network [OSTI]

    Venkataramani, Arun

    ) of the system. What is the utility function corresponding to a max-min fair allocation? What is the utility function corresponding to a TCP-fair allocation? To understand this, we formalize the resource allocation with a model for the following resource allocation problem: Given a network and a set of users, (i.e., flows

  11. Methodology for Constructing Reduced-Order Power Block Performance Models for CSP Applications: Preprint

    SciTech Connect (OSTI)

    Wagner, M.

    2010-10-01

    The inherent variability of the solar resource presents a unique challenge for CSP systems. Incident solar irradiation can fluctuate widely over a short time scale, but plant performance must be assessed for long time periods. As a result, annual simulations with hourly (or sub-hourly) timesteps are the norm in CSP analysis. A highly detailed power cycle model provides accuracy but tends to suffer from prohibitively long run-times; alternatively, simplified empirical models can run quickly but don?t always provide enough information, accuracy, or flexibility for the modeler. The ideal model for feasibility-level analysis incorporates both the detail and accuracy of a first-principle model with the low computational load of a regression model. The work presented in this paper proposes a methodology for organizing and extracting information from the performance output of a detailed model, then using it to develop a flexible reduced-order regression model in a systematic and structured way. A similar but less generalized approach for characterizing power cycle performance and a reduced-order modeling methodology for CFD analysis of heat transfer from electronic devices have been presented. This paper builds on these publications and the non-dimensional approach originally described.

  12. Method of and apparatus for determining the similarity of a biological analyte from a model constructed from known biological fluids

    DOE Patents [OSTI]

    Robinson, Mark R. (Albuquerque, NM); Ward, Kenneth J. (Albuquerque, NM); Eaton, Robert P. (Albuquerque, NM); Haaland, David M. (Albuquerque, NM)

    1990-01-01

    The characteristics of a biological fluid sample having an analyte are determined from a model constructed from plural known biological fluid samples. The model is a function of the concentration of materials in the known fluid samples as a function of absorption of wideband infrared energy. The wideband infrared energy is coupled to the analyte containing sample so there is differential absorption of the infrared energy as a function of the wavelength of the wideband infrared energy incident on the analyte containing sample. The differential absorption causes intensity variations of the infrared energy incident on the analyte containing sample as a function of sample wavelength of the energy, and concentration of the unknown analyte is determined from the thus-derived intensity variations of the infrared energy as a function of wavelength from the model absorption versus wavelength function.

  13. A Rational Agent for the Construction of a Semantic Model* PAUTRET Vincent

    E-Print Network [OSTI]

    to integrate our methodology into this type of theory. Introduction Knowledge Based Systems separate that aims at building knowledge models from a natural language description of a domain. Our methodology agents. We can thus consider a more complete automation of the process of modelling and show how

  14. Dialectica and Chu Constructions: Cousins? Valeria de Paiva

    E-Print Network [OSTI]

    de Paiva, Valeria

    to compare them abstractly. But while the Dialec- tica construction has been mainly explored by the author on the (underprivileged) Dialec- tica constructions. We start small: we show that the Dialectica construction can be done

  15. Construction of SDE-based wind speed models with exponential autocorrelation

    E-Print Network [OSTI]

    Miñano, Rafael Zárate

    2015-01-01

    This paper provides a systematic method to build wind speed models based on stochastic differential equations (SDEs). The resulting models produce stochastic processes with a given probability distribution and exponential decaying autocorrelation function. The only information needed to build the models is the probability density function of the wind speed and its autocorrelation coefficient. Unlike other methods previously proposed in the literature, the proposed method leads to models able to reproduce an exact exponential autocorrelation even if the probability distribution is not Gaussian. A sufficient condition for the property above is provided. The paper includes the explicit formulation of SDE-based wind speed models obtained from several probability distributions used in the literature to describe different wind speed behaviors.

  16. Getting Started and Optimization Strategy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePageStartedStarted

  17. Building robust chemical reaction mechanisms : next generation of automatic model construction software

    E-Print Network [OSTI]

    Song, Jing, 1972-

    2004-01-01

    Building proper reaction mechanisms is crucial to model the system dynamic properties for many industrial processes with complex chemical reaction phenomena. Because of the complexity of a reaction mechanism, computer-aided ...

  18. Remote monitoring of a model levee constructed on soft peaty organic soil

    E-Print Network [OSTI]

    Reinert, Edward T; Lemke, John; Stewart, Jonathan P; Brandenberg, Scott J

    2013-01-01

    of the model levee. MEMS sensor readings were recorded at 10is not measured by the MEMS sensors, but could conceivablySystems (MEMS) accelerometer sensors spaced 0.30m (1 ft)

  19. Unveiling Stability Criteria of DNA-Carbon Nanotubes Constructs by Scanning Tunneling Microscopy and Computational Modeling

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kilina, Svetlana; Yarotski, Dzmitry A.; Talin, A. Alec; Tretiak, Sergei; Taylor, Antoinette J.; Balatsky, Alexander V.

    2011-01-01

    We present a combined approach that relies on computational simulations and scanning tunneling microscopy (STM) measurements to reveal morphological properties and stability criteria of carbon nanotube-DNA (CNT-DNA) constructs. Application of STM allows direct observation of very stable CNT-DNA hybrid structures with the well-defined DNA wrapping angle of 63.4 ° and a coiling period of 3.3?nm. Using force field simulations, we determine how the DNA-CNT binding energy depends on the sequence and binding geometry of a single strand DNA. This dependence allows us to quantitatively characterize the stability of a hybrid structure with an optimal ?-stacking between DNA nucleotides andmore »the tube surface and better interpret STM data. Our simulations clearly demonstrate the existence of a very stable DNA binding geometry for (6,5) CNT as evidenced by the presence of a well-defined minimum in the binding energy as a function of an angle between DNA strand and the nanotube chiral vector. This novel approach demonstrates the feasibility of CNT-DNA geometry studies with subnanometer resolution and paves the way towards complete characterization of the structural and electronic properties of drug-delivering systems based on DNA-CNT hybrids as a function of DNA sequence and a nanotube chirality. « less

  20. Starting apparatus for internal combustion engines

    DOE Patents [OSTI]

    Dyches, G.M.; Dudar, A.M.

    1995-01-01

    This report is a patent description for a system to start an internal combustion engine. Remote starting and starting by hearing impaired persons are addressed. The system monitors the amount of current being drawn by the starter motor to determine when the engine is started. When the engine is started the system automatically deactivates the starter motor. Five figures are included.

  1. Hymenaea courbaril Marine construction, heavy construction,

    E-Print Network [OSTI]

    FSC Jatoba Hymenaea courbaril Marine construction, heavy construction, light construction, interior construction, furniture FSC Pine Pinus spp. Marine construction, heavy construction, light construction, interior construction, panel products, furniture FSC Larch Larix spp. (European Larch, Larix decidua

  2. START Renewable Energy Project Development Technical Assistance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    START Renewable Energy Project Development Technical Assistance START Renewable Energy Project Development Technical Assistance The U.S. Department of Energy (DOE) Office of Indian...

  3. Starting Points | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    (M&O) Contract Competition Starting Points Starting Points Kansas City Plant Related Web Pages Summary Kansas City Plant Home Page Kansas City Plant Contracts DOE Directives...

  4. Constructive physics

    E-Print Network [OSTI]

    Yuri Ozhigov

    2008-09-16

    Discussion of the necessity to use the constructive mathematics as the formalism of quantum theory for systems with many particles.

  5. Electrochemical construction

    DOE Patents [OSTI]

    Einstein, Harry (Springfield, NJ); Grimes, Patrick G. (Westfield, NJ)

    1983-08-23

    An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

  6. Starting pitch for carbon fibers

    SciTech Connect (OSTI)

    Uemura, S.; Takashima, H.; Kato, O.; Harakawa, M.

    1986-04-01

    This patent describes a starting pitch for producing carbon fiber. This pitch essentially consists of a mixture of (a) 100 parts by weight of a petroleum pitch and (b) 5 to 500 parts by weight of a methanol-insoluble and benzene-soluble component contained in a heavy oil obtained in a fluid catalytic cracking of petroleum. The heavy oil has a boiling range not lower than 200/sup 0/C. The component has been obtained by treating the heavy oil with methanol and benzene so as to remove methanol soluble and benzene insoluble fractions therefrom while retaining therein methanol-insoluble and benzene-soluble fractions.

  7. Rapid starting methanol reactor system

    DOE Patents [OSTI]

    Chludzinski, Paul J. (38 Berkshire St., Swampscott, MA 01907); Dantowitz, Philip (39 Nancy Ave., Peabody, MA 01960); McElroy, James F. (12 Old Cart Rd., Hamilton, MA 01936)

    1984-01-01

    The invention relates to a methanol-to-hydrogen cracking reactor for use with a fuel cell vehicular power plant. The system is particularly designed for rapid start-up of the catalytic methanol cracking reactor after an extended shut-down period, i.e., after the vehicular fuel cell power plant has been inoperative overnight. Rapid system start-up is accomplished by a combination of direct and indirect heating of the cracking catalyst. Initially, liquid methanol is burned with a stoichiometric or slightly lean air mixture in the combustion chamber of the reactor assembly. The hot combustion gas travels down a flue gas chamber in heat exchange relationship with the catalytic cracking chamber transferring heat across the catalyst chamber wall to heat the catalyst indirectly. The combustion gas is then diverted back through the catalyst bed to heat the catalyst pellets directly. When the cracking reactor temperature reaches operating temperature, methanol combustion is stopped and a hot gas valve is switched to route the flue gas overboard, with methanol being fed directly to the catalytic cracking reactor. Thereafter, the burner operates on excess hydrogen from the fuel cells.

  8. Constructive Matrix Theory

    E-Print Network [OSTI]

    V. Rivasseau

    2007-06-08

    We extend the technique of constructive expansions to compute the connected functions of matrix models in a uniform way as the size of the matrix increases. This provides the main missing ingredient for a non-perturbative construction of the $\\phi^{\\star 4}_4$ field theory on the Moyal four dimensional space.

  9. Construction Certifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certifications Individual Permit: Construction Certifications Enhanced control measures were designed and installed at 67 Sites in 42 SMAs in 2012. Contact Environmental...

  10. Commissioning and Start Up of a 110 MegaWatt Cogeneration Facility 

    E-Print Network [OSTI]

    Good, R.

    1988-01-01

    "In December of 1987, Union Carbide successfully brought on line a 110,000 KVA combined cycle cogeneration facility. The construction, commissioning and start up of this complex facility was accomplished in a remarkably short twelve months...

  11. Integrated starting and running amalgam assembly for an electrodeless fluorescent lamp

    DOE Patents [OSTI]

    Borowiec, Joseph Christopher (Schenectady, NY); Cocoma, John Paul (Clifton Park, NY); Roberts, Victor David (Burnt Hills, NY)

    1998-01-01

    An integrated starting and running amalgam assembly for an electrodeless SEF fluorescent lamp includes a wire mesh amalgam support constructed to jointly optimize positions of a starting amalgam and a running amalgam in the lamp, thereby optimizing mercury vapor pressure in the lamp during both starting and steady-state operation in order to rapidly achieve and maintain high light output. The wire mesh amalgam support is constructed to support the starting amalgam toward one end thereof and the running amalgam toward the other end thereof, and the wire mesh is rolled for friction-fitting within the exhaust tube of the lamp. The positions of the starting and running amalgams on the wire mesh are jointly optimized such that high light output is achieved quickly and maintained, while avoiding any significant reduction in light output between starting and running operation.

  12. The start-up of the bi-provincial upgrader

    SciTech Connect (OSTI)

    Chase, S. [Husky Oil Operations Ltd., Calgary, Alberta (Canada)

    1995-12-31

    The Bi-Provincial Upgrader is a $1.63 x 10{sup 9} Cdn grass-roots heavy oil upgrading facility located near Lloydminster, Saskatchewan. The facility, which started operation in August 1992, is designed to produce 7300 m{sup 3}/day of 34{degrees}API synthetic crude from 11-15{degrees}API heavy crude oils. The start-up and initial operation of the facility has been a technical success. The facility reached design capacity in a much shorter time than typically reported for the start-up of similar units and has operated reliably at better than design capacity. In this paper, the plant operating performance is reviewed in some detail. A review of the engineering and construction phases and a summary of regional benefits is also included.

  13. Eastman, AP start on coal unit

    SciTech Connect (OSTI)

    1995-10-25

    Eastman Chemical and Air Products and Chemicals (AP) have started construction of a $214-million, coal-to-methanol demonstration unit at Eastmans site in Kingsport, TN. The project is part of the Department of Energy`s clean coal technology program and is receiving $93 million in federal support. The demonstration unit-which will have a methanol capacity of 260 tons/day-will use novel catalyst technology for converting coal-derived synthesis gas (syngas) to methanol. Unlike conventional technology that processes syngas through a fixed bed of dry catalyst particles, the liquid-phase methanol process converts the syngas in a single vessel containing catalysts suspended in mineral oil. The companies say the innovation allows the process to better able handle the gases from coal gasifiers and is more stable and reliable than existing processes. Eastman says it will use the methanol produced by the plant as a chemical feedstock. It currently uses methanol as an intermediate in making acetic anhydride and dimethyl terephthalate. In addition, the companies say the methanol will be evaluated as a feedstock in making methyl tert-butyl ether for reformulated fuels. Eastman also says it will evaluate coproducing dimethyl ether (DME) with the methanol. DME can be used as a fuel additive or blended with methanol for a chemical feedstock, according to Eastman.

  14. Getting Started with Mathematica Introduction

    E-Print Network [OSTI]

    Barkana, Rennan

    remarkable word-processing capabilities as well. Mathematicians can (and often do) search for a working model in a standard way. In the mid-to-long term, this makes Mathematica a very easy-to-use, enjoyable tool. The concept is like that of a "document" in a word processor. You enter information and commands

  15. Improving Construction Workflow- The Role of Production Planning and Control

    E-Print Network [OSTI]

    Hamzeh, Farook

    2009-01-01

    Reduction of Waste in Construction Projects. ” ProceedingsReduction of Waste in Construction Projects. ” Proceedings1993). “Modeling Waste and Performance in Construction. ”

  16. Construction proprietary

    E-Print Network [OSTI]

    2. Construction a. The composite mirrors The mirror was made of a graphite #12;ber backing, coated An aerogel radiator can in principle pro- vide hadron separation throughout the full momentum range. However proton aerogel gas GeV mrad 0 50 100 150 200 250 2 4 6 8 10 12 14 track parameters Direct Ray Tracing

  17. Worldwide construction

    SciTech Connect (OSTI)

    Williamson, M.

    1995-10-16

    Listed are major construction projects by processing and pipeline categories. Contractors, status of project, estimated completion date, and added capacity are provided when available. The table is divided into refineries, petrochemical plants, sulfur recovery plants, gas processing plants, and pipelines (crude, gas, products, and condensates).

  18. Alaska START Application | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Alaska START Round Three Application More Documents & Publications CERTIFIED REALTY SPECIALIST Heating Ventilation and Air Conditioning Efficiency SITN Regional Outreach Map...

  19. Prediction of martensite start temperature Mathew Peet

    E-Print Network [OSTI]

    Cambridge, University of

    Prediction of martensite start temperature Mathew Peet September 23, 2014 Abstract Methods have been evaluated for the prediction of the martensite­ start temperature as a function of composition to the importance of phase transformations and heat treatments on the mechanical properties of steels, and due

  20. Library Construction 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    Research on food consumption and expenditures usually employs the use of unitary models that do not account for type of family financial structure. This research presents two collective models of household behavior, ...

  1. Twisted K-theory constructions in the case of a decomposable Dixmier-Douady class II: Topological and equivariant models

    E-Print Network [OSTI]

    Antti J. Harju

    2014-05-28

    This is a study of twisted K-theory on a product space $T \\times M$. The twisting comes from a decomposable cup product class which applies the 1-cohomology of $T$ and the 2-cohomology of $M$. In the case of a topological product, we give a concrete realization for the gerbe associated to a cup product characteristic class and use this to realize twisted $K^1$-theory elements in terms of supercharge sections in a Fredholm bundle. The nontriviality of this construction is proved. Equivariant twisted K-theory and gerbes are studied in the product case as well. This part applies Lie groupoid theory. Superconnection formalism is used to provide a construction for characteristic polynomials which are used to extract information from the twisted K-theory classes.

  2. New Construction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shinesSolar Photovoltaic(MillionNatureThousand Cubic Feet)NewofConstruction

  3. Stop and Restart Effects on Modern Vehicle Starting System Components

    SciTech Connect (OSTI)

    Windover, Paul R.; Owens, Russell J.; Levinson, Terry M.; Laughlin, Michael; Gaines, Linda

    2015-01-01

    Many drivers of personal and commercial vehicles believe that turning the vehicle off and on frequently instead of idling will cause premature wear of the starter system (starter motor and starter battery). As a result, they are concerned that the replacement cost of the starter motor and/or battery due to increased manual engine cycling would be more than the cumulative cost of the fuel saved by not idling unnecessarily. A number of variables play a role in addressing this complex concern, including the number of starting cycles per day, the time between starting cycles, the intended design life of the starting system, the amount of fuel used to restart an engine, and the cumulative cost of the saved fuel. Qualitative and quantitative information from a variety of sources was used to develop a life-cycle economic model to evaluate the cost and quantify the realistic factors that are related to the permissible frequency of starter motor cycles for the average vehicle to economically minimize engine idle time. Annual cost savings can be calculated depending on shutdown duration and the number of shutdown cycles per day. Analysis shows that cost savings are realized by eliminating idling exceeding one minute by shutting down the engine and restarting it. For a typical motorist, the damage to starting system components resulting from additional daily start cycles will be negligible. Overall, it was found that starter life is mostly dependent on the total number of start cycles, while battery life is more dependent on ensuring a full charge between start events.

  4. Getting Started in Research Administration v2 5/26/2015 Getting Started in Research Administration

    E-Print Network [OSTI]

    Hammack, Richard

    1 Getting Started in Research Administration v2 5/26/2015 Getting Started in Research Administration Training Opportunities and Online Resources Contents Introduction........................................................................................................................................................................2 Mandatory Training for Investigators and Administrators

  5. Organizational Project Management Maturity Model (OPM3) to Improve Ministery of Construction and Housing (MOCAH) Within Kurdistan Regional Government 

    E-Print Network [OSTI]

    Mustafa, Azad Jabbar

    2015-05-06

    The Organizational Project Management Maturity Model (OPM3®), a standard developed by the Project Management Institute (PMI), has become an effective model to help an organization successfully implement strategies and achieve its objectives...

  6. Simplifying Construction of Complex Workflows for Non-Expert Users of the Southern California Earthquake Center Community Modeling Environment

    E-Print Network [OSTI]

    Kim, Jihie

    the earth as a system, to gain a better understanding of the complex interactions between crustal stress more accurate models of the different system components: fault models, rupture dynamics, wave elements into an integrated model of the earth. It is with this goal in mind that that the Southern

  7. Introduction to Benchmarking: Starting a Benchmarking Plan

    Broader source: Energy.gov [DOE]

    Presentation for the Introduction to Benchmarking: Starting a Benchmarking Plan webinar, presented on February 21, 2013 as part of the U.S. Department of Energy's Technical Assistance Program (TAP).

  8. Why Do Start-Ups Patent?

    E-Print Network [OSTI]

    Graham, Stuart; Sichelman, Ted

    2008-01-01

    Why Do Start-Ups Patent? another employee who actuallyBut Seriously, Folks! No patent for PBJ! , 41 T ENN . B ARBoy Takes Swing at U.S. Patents, N EW S CIENTIST , Apr. 17,

  9. Constructing an idealized model of the North Atlantic Ocean using slippery sacks Patrick T. Haertel a,*, Luke Van Roekel b

    E-Print Network [OSTI]

    Jensen, Tommy

    steps are taken to reduce the potential energy barrier to sacks crossing one another, the model the northern boundary for a time. Taking advantage of the new mixing scheme and lessons learned from Institute of Technol- ogy general circulation model (MITgcm). The SSOM and the MITgcm produce similar wind

  10. Tactical Portfolio Construction

    E-Print Network [OSTI]

    Chen, Yue

    2012-01-01

    Chapter 2 Portfolio Construction Data source In thisTactical Portfolio Construction A thesis submitted inTHESIS Tactical Portfolio Construction by Yue Chen Master of

  11. Getting Started Videoconferences | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePageStartedStarted Getting

  12. Getting Started Videoconferences | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePageStartedStarted Getting

  13. SUSY GUT Model Building

    E-Print Network [OSTI]

    Stuart Raby

    2008-08-27

    I discuss an evolution of SUSY GUT model building, starting with the construction of 4d GUTs, to orbifold GUTs and finally to orbifold GUTs within the heterotic string. This evolution is an attempt to obtain realistic string models, perhaps relevant for the LHC. This review is in memory of the sudden loss of Julius Wess, a leader in the field, who will be sorely missed.

  14. Construction of a two-parameter empirical model of left ventricle wall motion using cardiac tagged magnetic resonance imaging data

    E-Print Network [OSTI]

    Shi, Jack J; Alenezy, Mohammed D.; Smirnova, Irina V.; Bilgen, Mehmet

    2012-10-24

    /Tcardiac=0.4, but read 0.2 for the apex and - 0.08 for the base level. The difference indicated that the apex twisted more than the base. Conclusion It is feasible to empirically model the spatial and temporal evolution of the LV wall motion using a two...

  15. Start your information security planning here!

    E-Print Network [OSTI]

    Magee, Joseph W.

    Start your information security planning here! Save the Date July 15, 2008 8:30 am ­ 12:30 pm-technology crimes. For additional information, visit http://csrc.nist.gov/secure iz/b or contact: securebiz developed a workshop to help the small business owner increase information system security. Learn how

  16. Getting Started Advanced Search for Funding Opportunities

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    Getting Started Advanced Search for Funding Opportunities For Assistance Delete Criteria to Update Search Funding ­ Finding Additional Sources Saving and Printing SPIN Search Results Past funding opportunities can be searched in InfoEd to: · find opportunities that were added prior to your account set

  17. Getting Started Guide ESA Series Spectrum Analyzers

    E-Print Network [OSTI]

    Anlage, Steven

    Getting Started Guide ESA Series Spectrum Analyzers This manual provides documentation yourself with the symbols and their meaning before operating this analyzer. WARNING Warning denotes, if not correctly performed or adhered to, could result in damage to or destruction of the analyzer. Do not proceed

  18. Health Coaching Available Starting November 20th

    E-Print Network [OSTI]

    Marsh, David

    Health Coaching Available Starting November 20th ! If you've completed your health survey and printed your report, which explains what you are doing well and what you can do better, health coaches are now available. . Our health coaches can work with you to help you take your health to the next level

  19. START Renewable Energy Project Development Assistance

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Office of Indian Energy is now accepting applications for the third round of the Strategic Technical Assistance Response Team (START) Renewable Energy Project Development Assistance Program to provide Tribes with technical assistance with furthering the development of community- and commercial-scale renewable energy projects.

  20. New method for classifying construction information 

    E-Print Network [OSTI]

    Lee, Sunku

    2001-01-01

    market with very little commonality among them. With continued globalization of the construction industry and the rapid development toward a computer integrated construction process based on computer-aided product data modeling, the need for a uniform...

  1. Green Buildings: Construction Design Firms' Implementation of Sustainable Design Standards

    E-Print Network [OSTI]

    Malone, Nathan

    2008-12-19

    in order to stay competitive in the construction design industry. The paper starts by describing the parts of the current industry standard green building rating system, Leadership in Energy and Environmental Design (LEED), and explaining whom uses LEED...

  2. Method of forming and starting a sodium sulfur battery

    DOE Patents [OSTI]

    Paquette, David G. (Costa Mesa, CA)

    1981-01-01

    A method of forming a sodium sulfur battery and of starting the reactive capability of that battery when heated to a temperature suitable for battery operation is disclosed. An anodic reaction zone is constructed in a manner that sodium is hermetically sealed therein, part of the hermetic seal including fusible material which closes up openings through the container of the anodic reaction zone. The hermetically sealed anodic reaction zone is assembled under normal atmospheric conditions with a suitable cathodic reaction zone and a cation-permeable barrier. When the entire battery is heated to an operational temperature, the fusible material of the hermetically sealed anodic reaction zone is fused, thereby allowing molten sodium to flow from the anodic reaction zone into reactive engagement with the cation-permeable barrier.

  3. Physical model construction for electrical anisotropy of single crystal zinc oxide micro/nanobelt using finite element method

    SciTech Connect (OSTI)

    Yu, Guangbin [The Higher Educational Key Laboratory for Measuring and Control Technology and Instrumentations of Heilongjiang Province, Harbin University of Science and Technology, Harbin 150080 (China); Tang, Chaolong [Department of Metallurgical and Materials Engineering, Center for Materials for Information Technology (MINT), University of Alabama, Tuscaloosa, Alabama 35487 (United States); Song, Jinhui, E-mail: jhsong@eng.ua.edu, E-mail: wqlu@cigit.ac.cn [The Higher Educational Key Laboratory for Measuring and Control Technology and Instrumentations of Heilongjiang Province, Harbin University of Science and Technology, Harbin 150080 (China); Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing 400714 (China); Department of Metallurgical and Materials Engineering, Center for Materials for Information Technology (MINT), University of Alabama, Tuscaloosa, Alabama 35487 (United States); Lu, Wenqiang, E-mail: jhsong@eng.ua.edu, E-mail: wqlu@cigit.ac.cn [Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing 400714 (China)

    2014-04-14

    Based on conductivity characterization of single crystal zinc oxide (ZnO) micro/nanobelt (MB/NB), we further investigate the physical mechanism of nonlinear intrinsic resistance-length characteristic using finite element method. By taking the same parameters used in experiment, a model of nonlinear anisotropic resistance change with single crystal MB/NB has been deduced, which matched the experiment characterization well. The nonlinear resistance-length comes from the different electron moving speed in various crystal planes. As the direct outcome, crystallography of the anisotropic semiconducting MB/NB has been identified, which could serve as a simple but effective method to identify crystal growth direction of single crystal semiconducting or conductive nanomaterial.

  4. Starting apparatus for internal combustion engines

    DOE Patents [OSTI]

    Dyches, Gregory M. (Barnwell, SC); Dudar, Aed M. (Augusta, GA)

    1997-01-01

    An internal combustion engine starting apparatus uses a signal from a curt sensor to determine when the engine is energized and the starter motor should be de-energized. One embodiment comprises a transmitter, receiver, computer processing unit, current sensor and relays to energize a starter motor and subsequently de-energize the same when the engine is running. Another embodiment comprises a switch, current transducer, low-pass filter, gain/comparator, relay and a plurality of switches to energize and de-energize a starter motor. Both embodiments contain an indicator lamp or speaker which alerts an operator as to whether a successful engine start has been achieved. Both embodiments also contain circuitry to protect the starter and to de-energize the engine.

  5. Technical Assistance Program: Off to a Running Start (Newsletter)

    SciTech Connect (OSTI)

    Not Available

    2012-02-01

    This newsletter describes key activities of the DOE Office of Indian Energy Policy and Programs for Winter 2012. Between December 2, 2011, and January 15, 2012, 46 American Indian and Alaska Native Tribes submitted applications to receive technical assistance through the program, which provides Tribes with on-the-ground technical support from DOE and National Renewable Energy Laboratory (NREL) staff to help move tribal energy efficiency and renewable energy projects forward. The applications are being considered through the Strategic Technical Assistance Response Team (START) selection process, which incorporates expert reviews and outreach to Tribes who present a need for assistance with their community-based energy efficiency and renewable energy projects. The final successful applicants will be selected based on the clarity of their requests for technical assistance and the ability of START to successfully work with each unique project or community. At least three selected Tribes in Alaska will receive technical assistance between March and May 2012, and up to five selected Tribes in the contiguous United States will receive technical assistance between March and August 2012. During the months of START Program activity, DOE and NREL experts will work in the two locations. In Alaska, START experts will work directly with community-based project teams to analyze local energy issues and provide assistance with energy projects and cost savings initiatives. This effort will be bolstered by DOE-IE's partnership with the Denali Commission, which will provide further assistance and expertise. In the lower 48 states, NREL experts will work with the selected renewable energy START projects to evaluate financial and technical feasibility and provide early development technical assistance to better position the projects for financing and construction. This on-the-ground technical assistance is part of a broader DOE-IE effort to make reliable, accurate technical information and skills-based training available to tribal communities throughout the United States. The primary goal of the START initiative, according to DOE-IE Director Tracey A. LeBeau, is to bring about the next generation of energy development in Indian Country. Through energy project planning, quality training, and technical assistance, The START program will leverage the early-stage resource characterization and pre-feasibility investments that DOE has made in Indian Country over the years, and unlock the energy resources that exist on tribal lands to help build a 21st century tribal energy economy. Working collaboratively with a select group of Tribes and Alaska Native entities, the DOE Office of Indian Energy, NREL, and the Denali Commission will empower tribal leaders to make informed energy decisions and help build capacity to bring tribal energy visions to fruition and get renewable energy projects off the ground, said LeBeau. Ultimately, these efforts will serve to further the Obama Administration and DOE's shared commitment to provide Native American and Alaska Native communities with the tools and resources they need to foster tribal energy self-sufficiency and sustainability, advancing job creation and enhancing economic competitiveness.

  6. Assessment of the effectiveness of the advanced programmatic risk analysis and management model (apram) as a decision support tool for construction projects 

    E-Print Network [OSTI]

    Imbeah, William Kweku Ansah

    2007-09-17

    Construction projects are complicated and fraught with so many risks that many projects are unable to meet pre-defined project objectives. Managers of construction projects require decision support tools that can be used ...

  7. Energy Department Extends Deadline to Apply for START Tribal...

    Energy Savers [EERE]

    Extends Deadline to Apply for START Tribal Renewable Energy Project Development Assistance to May 22, 2015 Energy Department Extends Deadline to Apply for START Tribal Renewable...

  8. Energy Department Extends Deadline to Apply for START Tribal...

    Broader source: Energy.gov (indexed) [DOE]

    for the third round of Strategic Technical Assistance Response Team (START) Renewable Energy Project Development Assistance to May 22, 2015. The START Program provides federally...

  9. Applications for START Clean Energy Project Development Technical...

    Broader source: Energy.gov (indexed) [DOE]

    for the third round of Strategic Technical Assistance Response Team (START) Renewable Energy Project Development Assistance. Through START, federally recognized tribal...

  10. Construction, Qualification, and Low Rate Production Start-up of a DC Bus

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels|ProgramsLake PaiuteHanford, IncofWorker ScreeningOhio |Capacitor

  11. Construction, Qualification, and Low Rate Production Start-up of a DC Bus

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels|ProgramsLake PaiuteHanford, IncofWorker ScreeningOhio

  12. Construction, Qualification, and Low Rate Production Start-up of a DC Bus

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels|ProgramsLake PaiuteHanford, IncofWorker ScreeningOhioCapacitor High

  13. SWERA/Getting Started | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc Jump to:Newberg,EnergyEastCarbon Development |SMC CoSWERA/Getting Started <

  14. WestStart CALSTART | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThinWarsaw, Poland:EnergyWeVirginia UniversityWestStart CALSTART

  15. Starting Points | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4) August 20123/%2A en Signature ofSebStarting Points |

  16. CleanStart | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company) Jump to:New York:ClayBurnVita JumpCleanCleanCleanStart Jump

  17. Fast Start Financing | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdisto Electric Coop,ErosionNewCoalFarmland Protection Policy ActStart

  18. ADA Retrofit and Construction

    E-Print Network [OSTI]

    Minnesota, University of

    ADA Retrofit and Construction Management Richfield, MN Breckenridge, MN #12;Introduction & Outline Design vs. Construction § Case Studies § City of Richfield's Transition Plan #12;How Detailed Should, MN #12;Case Study Breckenridge, MN #12;§ Construction Plans § Intersection Details for "tough

  19. Team work: Construction

    E-Print Network [OSTI]

    Berdichevsky, Victor

    teamwork outside the classroom as well. Construction Management at Wayne StateTeam work: Construction Management The Division of Engineering Technology! Your coursework is just the beginning. Construction management students work

  20. Construction | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policymakers Construction at Jefferson Lab The Technology & Engineering Development Facility or TEDF is one of the new facilities being constructed at Jefferon Lab is support of...

  1. Education and Construction

    E-Print Network [OSTI]

    Bogyo, Matthew

    Construction Bioengineering/Chemical Engineering Building, Under Construction Lucile Packard Children Center Lyman Graduate Residences Sterling Quad Mirrielees Pearce Mitchell Houses Stanford Hospital

  2. Education and Construction

    E-Print Network [OSTI]

    Straight, Aaron

    Construction Bioengineering/Chemical Engineering Building, Under Construction Lucile Packard Children Graduate Residences Sterling Quad Mirrielees Pearce Mitchell Houses Stanford Hospital Varsity Lot Jordan

  3. Education and Construction

    E-Print Network [OSTI]

    Bogyo, Matthew

    Construction Bioengineering/Chemical Engineering Building, Under Construction Lucile Packard Children Residences Sterling Quad Mirrielees Pearce Mitchell Houses Stanford Hospital Varsity Lot Jordan Quad

  4. Education and Construction

    E-Print Network [OSTI]

    Bogyo, Matthew

    Construction Bioengineering/Chemical Engineering Building, Under Construction Lucile Packard Children Houses Schwab Residential Center Lyman Graduate Residences Sterling Quad Mirrielees Pearce Mitchell

  5. Education and Construction

    E-Print Network [OSTI]

    Bejerano, Gill

    Construction Bioengineering/Chemical Engineering Building, Under Construction Lucile Packard Children Wilbur Hall Kimball Hall Cowell Houses Schwab Residential Center Lyman Graduate Residences Sterling Quad

  6. Method and apparatus for starting supersonic compressors

    DOE Patents [OSTI]

    Lawlor, Shawn P

    2013-08-06

    A supersonic gas compressor with bleed gas collectors, and a method of starting the compressor. The compressor includes aerodynamic duct(s) situated for rotary movement in a casing. The aerodynamic duct(s) generate a plurality of oblique shock waves for efficiently compressing a gas at supersonic conditions. A convergent inlet is provided adjacent to a bleed gas collector, and during startup of the compressor, bypass gas is removed from the convergent inlet via the bleed gas collector, to enable supersonic shock stabilization. Once the oblique shocks are stabilized at a selected inlet relative Mach number and pressure ratio, the bleed of bypass gas from the convergent inlet via the bypass gas collectors is effectively eliminated.

  7. World`s developing regions provide spark for pipeline construction

    SciTech Connect (OSTI)

    Koen, A.D.; True, W.R.

    1996-02-05

    This paper reviews the proposed construction of oil and gas pipelines which are underway or proposed to be started in 1996. It breaks down the projects by region of the world, type of product to be carried, and diameter of pipeline. It also provides mileage for each category of pipeline. Major projects in each region are more thoroughly discussed giving details on construction expenditures, construction problems, and political issues.

  8. Nonrecovery cokemaking/cogeneration complex at Inland Steel scheduled to start up in mid-1998

    SciTech Connect (OSTI)

    Samways, N.L.

    1997-12-01

    A 1.33 million ton/year cokemaking/cogeneration power complex is under construction at the Indiana Harbor Works. The cokemaking plant consists of four batteries of nonrecovery type coke ovens representing a total of 268 ovens. The cogeneration energy facilities include: 16 heat recovery boilers; a steam turbine generator, and a flue gas desulfurization system. Start-up is scheduled for mid-1998. Both facilities are described.

  9. GettingStartedVideoconferenceSlides2014.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are well balanced Minimal system overhead - Simple lightweight OS (CNK) minimizes noise Standard Programming Models - Fortran, C, C++ & Python languages supported -...

  10. An adelic construction of Chern classes

    SciTech Connect (OSTI)

    Budylin, Roman Ya [M. V. Lomonosov Moscow State University, Faculty of Mechanics and Mathematics, Moscow (Russian Federation)

    2011-11-30

    We give a formula expressing the second Chern class c{sub 2}(E) in terms of trivializations of a rank two vector bundle E at scheme points of a surface X over a field. To do this, starting with these trivializations, we construct a cocycle in the adelic complex associated with the sheaf K{sub 2}(O{sub X}). Furthermore we prove that the Severi formula for the second Chern class is obtained as a special case of the formula constructed in this work. Bibliography: 10 titles.

  11. Green Business in Indian Country Start-Up Award

    Broader source: Energy.gov [DOE]

    Trees, Water, & People is accepting applications for the Green Business in Indian Country Start-Up Award and offering assistance to one selected applicant in starting their own business in a related field.

  12. Start-Up of FEL Oscillator from Shot Noise

    E-Print Network [OSTI]

    Kumar, V.; Krishnagopal, S.; Fawley, W.M.

    2007-01-01

    of start-up of the CUTE-FEL oscillator from shot noiseof passes required for the FEL to saturate is equivalent toSTART-UP OF FEL OSCILLATOR FROM SHOT NOISE V. Kumar ? , S.

  13. Start-up manufacturing firms: operations for survival 

    E-Print Network [OSTI]

    Liu, Kuangyi

    2009-11-25

    Start-up firms play an important role in the economy. Statistics show that a large percent of start-up firms fail after few years of establishment. Raising capital, which is crucial to success, is one of the difficulties ...

  14. Modeling Cold Start in a Polymer-Electrolyte Fuel Cell

    E-Print Network [OSTI]

    Balliet, Ryan

    2010-01-01

    Polymer Electrolyte Fuel Cell Cross—Section Below Freezingstart—up of a fuel cell from below freezing. Because waterFreezing in a Polymer—Electrolyte—Membrane Fuel Cell,” ECS

  15. Modeling Cold Start in a Polymer-Electrolyte Fuel Cell

    E-Print Network [OSTI]

    Balliet, Ryan

    2010-01-01

    conditions used for fuel—cell simulations. 3.12 Values usedFuel Cells . . . . . . . . . . . . . . . . . . . . . . 1.1.1in Polymer Electrolyte Fuel Cells — II. Parametric Study,”

  16. Modeling Cold Start in a Polymer-Electrolyte Fuel Cell

    E-Print Network [OSTI]

    Balliet, Ryan

    2010-01-01

    renewable source of energy, a signi?cant drawback of PEFCS relative to batteriesrenewable Table 1.1: Comparison of the overall ef?ciency for PEFCs to that of Li—ion batteries.

  17. Modeling Cold Start in a Polymer-Electrolyte Fuel Cell

    E-Print Network [OSTI]

    Balliet, Ryan

    2010-01-01

    2.4 Understanding PCI Flow and Frost Heave 2.4.1 The driving2.4.3 Examples of PCI Flow and Frost Heave inthree methods for stopping PCI ?ow . . . . . . . . . . . .

  18. Modeling Cold Start in a Polymer-Electrolyte Fuel Cell

    E-Print Network [OSTI]

    Balliet, Ryan

    2010-01-01

    layers present in the UTC Power cell hardware. The core oflimits the performance. Cell power density, given by P =Figure 5.2 compares the cell power output and temperature as

  19. Modeling Cold Start in a Polymer-Electrolyte Fuel Cell

    E-Print Network [OSTI]

    Balliet, Ryan

    2010-01-01

    conditions used for fuel—cell simulations. 3.12 Values usedin Polymer Electrolyte Fuel Cells — II. Parametric Study,”of Polymer Electrolyte Fuel Cells,” Electrochimica Acta, 53,

  20. Construction News Report Construction News Report

    E-Print Network [OSTI]

    and 3rd floors. · Continued heating hot water piping on the 1st floor. · Continued low pressure duct. · Continued plumbing and HVAC insulation on the 4th floor. · Continued duct insulation on the 3rd floor and domestic at restrooms on the 2nd, 3rd and 4th floors. · Started testing sanitary and domestic on the 2nd

  1. Construction News Report Construction News Report

    E-Print Network [OSTI]

    . · Started heating hot water on the 1st floor. · Set gas meter and completed tie in· Installed west insulation and drywall at perimeter walls on the 3rd floor g, y g g y g help minimize the heat island effect paving. · Installed bollards. · Continued RODI piping on the 4th floor. · Continued miscellaneous

  2. Structure finance for hybrid infrastructure models : the application of project finance into public-private partnerships for the construction and operation of infrastructure

    E-Print Network [OSTI]

    Patramanis, Theodoros

    2006-01-01

    This thesis studies the application of project finance as the most efficient financing method for the construction and operation of infrastructure projects such as motorways, airports, power plants, pipelines, wastewater/sewage ...

  3. WORKSHOP ON CONSTRUCTION ENGINEERING

    E-Print Network [OSTI]

    Tommelein, Iris D.

    WORKSHOP ON CONSTRUCTION ENGINEERING BASIC RESEARCH Final Report Robert I. Carr William F. Maloney September, 1982 THE UNIVERSITY OF MICHIGAN DEPARTMENT OF CIVIL ENGINEERING CONSTRUCTION ENGINEERING on Construction Engineering Basic Research Final Report Held at The University of Michigan Ann Arbor, Michigan May

  4. AVTA: 2010 Volkswagon Golf Diesel Start-Stop Testing Results

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following reports describe results of testing done on a 2010 Volkswagon Golf Diesel vehicle with stop-start technology. Baseline data, which provides a point of comparison for the other test results, was collected at two different research laboratories. Baseline and other data collected at Idaho National Laboratory is in the attached documents. Baseline and battery testing data collected at Argonne National Laboratory is available in summary and CSV form on the Argonne Downloadable Dynometer Database site (http://www.anl.gov/energy-systems/group/downloadable-dynamometer-databas...). Taken together, these reports give an overall view of how this vehicle functions under extensive testing.

  5. Start-up control system and vessel for LMFBR

    DOE Patents [OSTI]

    Durrant, Oliver W. (Akron, OH); Kakarala, Chandrasekhara R. (Clinton, OH); Mandel, Sheldon W. (Galesburg, IL)

    1987-01-01

    A reflux condensing start-up system comprises a steam generator, a start-up vessel connected parallel to the steam generator, a main steam line connecting steam outlets of the steam generator and start-up vessel to a steam turbine, a condenser connected to an outlet of the turbine and a feedwater return line connected between the condenser and inlets of the steam generator and start-up vessel. The start-up vessel has one or more heaters at the bottom thereof for heating feedwater which is supplied over a start-up line to the start-up vessel. Steam is thus generated to pressurize the steam generator before the steam generator is supplied with a heat transfer medium, for example liquid sodium, in the case of a liquid metal fast breeder reactor. The start-up vessel includes upper and lower bulbs with a smaller diameter mid-section to act as water and steam reservoirs. The start-up vessel can thus be used not only in a start-up operation but as a mixing tank, a water storage tank and a level control at low loads for controlling feedwater flow.

  6. Start-up control system and vessel for LMFBR

    DOE Patents [OSTI]

    Durrant, Oliver W. (Akron, OH); Kakarala, Chandrasekhara R. (Clinton, OH); Mandel, Sheldon W. (Galesburg, IL)

    1987-01-01

    A reflux condensing start-up system includes a steam generator, a start-up vessel connected parallel to the steam generator, a main steam line connecting steam outlets of the steam generator and start-up vessel to a steam turbine, a condenser connected to an outlet of the turbine and a feedwater return line connected between the condenser and inlets of the steam generator and start-up vessel. The start-up vessel has one or more heaters at the bottom thereof for heating feedwater which is supplied over a start-up line to the start-up vessel. Steam is thus generated to pressurize the steam generator before the steam generator is supplied with a heat transfer medium, for example liquid sodium, in the case of a liquid metal fast breeder reactor. The start-up vessel includes upper and lower bulbs with a smaller diameter mid-section to act as water and steam reservoirs. The start-up vessel can thus be used not only in a start-up operation but as a mixing tank, a water storage tank and a level control at low loads for controlling feedwater flow.

  7. MAINTENANCE (Purchasing Department) CONSTRUCTION (Design & Construction Services Department)

    E-Print Network [OSTI]

    MAINTENANCE (Purchasing Department) vs. CONSTRUCTION (Design & Construction Services Department NO NO Maintenance or Construction Decision Tree Maintenance : Maintenance is the upkeep of property , machinery

  8. Dislocation focus construction in Chinese

    E-Print Network [OSTI]

    Cheung, Lawrence Yam-Leung

    2009-01-01

    of dislocation focus construction in Cantonese. MA thesis,London. Dislocation focus construction in Chinese Leung,SP Dislocation focus construction in Chinese (a) (b) (c) (

  9. Commercial New Construction

    Broader source: Energy.gov [DOE]

    Efficiency Vermont offers support to encourage energy efficient design for new construction. Efficiency Vermont will provide support for new commercial buildings, including technical assistance at...

  10. Construction of Channels (Indiana)

    Broader source: Energy.gov [DOE]

    Permission is required from the Natural Resources Commission is required for the construction or alteration of artificial channels or improved channels of natural watercourses that connect to any...

  11. SF6432-CN Construction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    under the tab titled "Forms" or obtained from the Control : SF 6432-CN Title: Standard Terms and Conditions for Firm-Fixed Price Commercial Construction Contracts Owner:...

  12. Construction Control Representative

    Broader source: Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Rocky Mountain Region Maintenance, (J5600) Engineering and Construction 5555 E....

  13. Straightedge and compass constructibility

    E-Print Network [OSTI]

    2009-11-09

    NOTES AND EXERCISES ON CONSTRUCTIBILITY. In what follows, we identify the euclidean plane with the set of complex numbers C. All fields are assumed ...

  14. Cold-Start Emissions Control in Hybrid Vehicles Equipped with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emissions Control in Hybrid Vehicles Equipped with a Passive Adsorber for Hydrocarbons and NOx Cold-Start Emissions Control in Hybrid Vehicles Equipped with a Passive Adsorber for...

  15. Start-up Plan for Plautonium-238 Production for Radioisotope...

    Broader source: Energy.gov (indexed) [DOE]

    The Administration has requested the restart of plutonium-238 (Pu-238) production in fiscal year (FY) 2011. The following joint start-up plan, consistent with the President's...

  16. Deep Energy Cuts for a Fresh Start

    SciTech Connect (OSTI)

    Gilbride, Theresa L.

    2009-01-30

    This case study describes an energy-efficient retrofit of 1930's bungalow in Pittsburgh, PA, done in 2008 by New Jersey builder and remodeler Bill Asdal. The gut rehab brought the home’s Home Energy Rating System (HERS) index scores from 185 down to an impressive 65, performance that makes the home 35% better than the 2006 International Energy Conservation Code. The builder kept the shell but stripped the walls down to the studs to seal, caulk, and insulate the building envelope; they also upgraded HVAC, water heating, appliances, lighting, and windows with higher performance but readily available products. A blower door infiltration test showed an air infiltration rate reduction from 0.53 ACH to 0.21 ACH and modeling of energy use showed a drop in total annual energy use from 271 million BTU to 92 million BTU. The home was used as a demonstration home at the ACI 2008 conference in Pittsburgh PA. The builder, Bill Asdal, was the chair of the retrofit committee of the National Association of Home Builders which is partially sponsored by DOE's Building America program. The article, under this title, appeared as the cover story in the trade journal Home Energy magazine Jan Feb 2009 issue. A modified version of this case study under the title "Comprehensive Energy Retrofits Case Study: Asdal Builders, LLC, Pittsburgh, PA" was distributed at the EEBA (Energy and Environmental Building Alliance) Annual Conference in Denver, Colorado, Sept 28-30, 2009.

  17. Ge#ng Started on HokieSpeed

    E-Print Network [OSTI]

    Crawford, T. Daniel

    Ge#ng Started on HokieSpeed Advanced Research Computing #12;Advanced Research Compu:ng;Advanced Research Compu:ng Important Login Informa:on · Account sheets provide login Compu:ng Ge#ng Started Steps 1. Sheet distributed provides your training account

  18. Optimal Deployment of Emissions Reduction Technologies for Construction Equipment

    E-Print Network [OSTI]

    Quadrifoglio, Luca

    Optimal Deployment of Emissions Reduction Technologies for Construction Equipment Muhammad Ehsanul The objective of this research was to develop a multiob- jective optimization model to deploy emissions reduction technologies for nonroad construction equipment to re- duce emissions in a cost

  19. Application of lean enterprise concept to construction firms in Japan

    E-Print Network [OSTI]

    Taguchi, Hiroshi, 1973-

    2004-01-01

    Construction firms in Japan are struggling with the change in construction industry environment and need a new business model to meet the change. On the other hand, Japanese manufacturing companies, especially automobile ...

  20. START Fact Sheet START, June 2014 1 The Evolution of the Islamic State of Iraq and the Levant (ISIL)

    E-Print Network [OSTI]

    Hill, Wendell T.

    -Baghdadi announced the expansion of ISI to Syria, officially rebranding the organization as the Islamic State of IraqSTART Fact Sheet © START, June 2014 1 FACT SHEET The Evolution of the Islamic State of Iraq PREVIOUSLY POSITIVE 1) The group currently known as Islamic State of Iraq and the Levant (ISIL

  1. Construction work process management 

    E-Print Network [OSTI]

    Soares, Jorge Barbosa

    1994-01-01

    for organizationand project-level work processes. Data to support the analysis were collected through a mailed questionnaire sent to construction executives and managers who were asked to provide information on organizational and project work processes, respectively....

  2. Pipeline Construction Guidelines (Indiana)

    Broader source: Energy.gov [DOE]

    The Division of Pipeline Safety of the Indiana Utility Regulatory Commission regulates the construction of any segment of an interstate pipeline on privately owned land in Indiana. The division has...

  3. Passive solar construction handbook

    SciTech Connect (OSTI)

    Levy, E.; Evans, D.; Gardstein, C.

    1981-08-01

    Many of the basic elements of passive solar design are reviewed. The unique design constraints presented in passive homes are introduced and many of the salient issues influencing design decisions are described briefly. Passive solar construction is described for each passive system type: direct gain, thermal storage wall, attached sunspace, thermal storage roof, and convective loop. For each system type, important design and construction issues are discussed and case studies illustrating designed and built examples of the system type are presented. Construction details are given and construction and thermal performance information is given for the materials used in collector components, storage components, and control components. Included are glazing materials, framing systems, caulking and sealants, concrete masonry, concrete, brick, shading, reflectors, and insulators. The Load Collector Ratio method for estimating passive system performance is appended, and other analysis methods are briefly summarized. (LEW)

  4. Genomic library construction

    DOE Patents [OSTI]

    Church, George M. (Brookline, MA); Zhang, Kun (San Diego, CA)

    2011-07-26

    Compositions and methods for amplifying nucleic acid sequences from a single cell are provided. Compositions and methods for constructing a genomic library from a single cell are also provided.

  5. Material efficiency in construction

    E-Print Network [OSTI]

    Moynihan, Muiris

    2014-10-07

    Nomenclature Roman Symbols CO2e Carbon dioxide equivalent CO2 Carbon dioxide BCSA British Constructional Steelwork Association BREEAM Building Research Establishment Environmental Assessment Method BSI British Standards Institute CCS Carbon capture and storage...

  6. COLD-START CHARACTERISTICS OF POLYMER ELECTROLYTE FUEL CELLS

    SciTech Connect (OSTI)

    Mukherjee, Partha P [ORNL

    2010-01-01

    In this paper, we investigate the electrochemical reaction kinetics, species transport, and solid water dynamics in a polymer electrolyte fuel cell (PEFC) during cold start. A simplified analysis is developed to enable the evaluation of the impact of ice volume fraction on cell performance during cold-start. Supporting neutron imaging data are also provided to reveal the real-time water evolution. Temperature-dependent voltage changes due to the reaction kinetics and ohmic loss are also analyzed based on the ionic conductivity of the membrane at subfreezing temperature. The analysis is valuable for the fundamental study of PEFC cold-start.

  7. Cold-Start Performance and Emissions Behavior of Alcohol Fuels...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance and Emissions Behavior of Alcohol Fuels in an SIDI Engine Using Transient Hardware-In-Loop Test Meth Cold-Start Performance and Emissions Behavior of Alcohol Fuels in...

  8. Product Design Specifications Starting Product Development Projects Right

    E-Print Network [OSTI]

    Salustri, Filippo A.

    Product Design Specifications Starting Product Development Projects Right Filippo A What? How? teams must solve same problem unfettered innovation v.risk management need to created balanced designs a structured control document a thinking tool a collaboration tool promotes innovation

  9. Does START triage work? An outcomes assessment after a disaster.

    E-Print Network [OSTI]

    Kahn, Christopher A; Schultz, Carl H; Miller, Ken T; Anderson, Craig L

    2009-01-01

    Does START Triage Work? An Outcomes Assessment after ato one with a score of 16 (red). Does one require anICU while the other does not? This is akin to the problems

  10. Laboratory Director Stewart Prager heralds start of new era with...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Director Stewart Prager heralds start of new era with NSTX-U and looks to future projects in "State of the Laboratory" address By Jeanne Jackson DeVoe October 13, 2015...

  11. Laboratory Director Stewart Prager heralds start of new era with...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Director Stewart Prager heralds start of new era with NSTX-U and looks to future projects in "State of the Laboratory" address By Jeanne Jackson DeVoe October 28, 2015...

  12. Are You Pregnant? Prevent Lead Poisoning. Start Now.

    E-Print Network [OSTI]

    Are You Pregnant? Prevent Lead Poisoning. Start Now. Lead poisoning is caused by breathing to keep your baby safe from lead poisoning. Here's what you can do: 1 Watch out for lead in your home

  13. Feasibility of Starting a Waterjet Fabrication Plant in Amman, Jordan

    E-Print Network [OSTI]

    Ahmad, Khaled A.

    2010-05-14

    This project is an attempt to investigate the feasibility of starting a waterjet fabrication plant in Amman, Jordan to precisely cut marble, granite, and ceramics. The frame work of the feasibility study included analyzing the proposed product...

  14. Large-eddy simulation of starting buoyant jets

    E-Print Network [OSTI]

    Law, Adrian Wing-Keung

    A series of Large Eddy Simulations (LES) are performed to investigate the penetration of starting buoyant jets. The LES code is first validated by comparing simulation results with existing experimental data for both steady ...

  15. Univalent Foundation and Constructive Mathematics

    E-Print Network [OSTI]

    Coquand, Thierry

    Univalent Foundation and Constructive Mathematics Thierry Coquand Oberwolfach, November 18, 2014 #12;Univalent Foundation and Constructive Mathematics Univalent Foundations Voevodsky's program to express mathematics in type theory instead of set theory 1 #12;Univalent Foundation and Constructive

  16. Constructive Artificial Intelligence Information Theory

    E-Print Network [OSTI]

    Polani, Daniel

    Constructive Artificial Intelligence Information Theory Daniel Polani School of Computer Science referenced. Constructive Artificial Intelligence #12;Coin Weighing Problem (after Denker 2004) Problem Given (minimax principle) Constructive Artificial Intelligence #12;Considerations Note in a measurement, left

  17. Considerations in Construction Sequence Scheduling Pre-Construction Evaluation: Before construction, evaluate, mark, and protect trees,

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Considerations in Construction Sequence Scheduling Pre-Construction Evaluation: Before construction, evaluate, mark, and protect trees, areas to be preserved, and areas of vegetation suitable for filter strips. Construction Access: Construct a stabilized entrance and limit vehicle access to the site

  18. Existing Commercial Reference Buildings Constructed In or After 1980 — Archive

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location.

  19. Volume 2, Chapter 1: A General Discussion on Construction of Ch'in

    E-Print Network [OSTI]

    Binkley, Jim

    to explain these mysteries in successive order starting from selecting materials, to construction, to repairs) ch'in handbook 7 . Nowadays these ch'in are seldom seen. Also if one examines all of the ch'in handbooks it is rare that one will find anything about construction. Some of them occasionally will mention

  20. REVISED CONSTRUCTION ALERT For On-going Construction Project

    E-Print Network [OSTI]

    REVISED CONSTRUCTION ALERT For On-going Construction Project TO: Deans, Directors, Chairpersons routes are affected by this work. ADVISORY: All persons in the vicinity of this construction project are advised to respect all construction barricades and all posted safety/detour signs. Your patience

  1. CONSTRUCTION NOTICE SUPPLEMENT For On-going Construction Project

    E-Print Network [OSTI]

    CONSTRUCTION NOTICE SUPPLEMENT For On-going Construction Project TO: Deans, Directors, Chairpersons Alarm System UHM 05-537A CONTRACTOR: Biven's Electric, Inc. Dba West Coast Construction SCOPE OF WORK OF CONSTRUCTION FROM 7:30 AM TO 4:30 PM ACCESSIBLE ROUTES: No accessible routes will be affected by this test

  2. CONSTRUCTION ALERT For On-going Construction Project

    E-Print Network [OSTI]

    CONSTRUCTION ALERT For On-going Construction Project TO: Deans, Directors, Chairpersons, Building. ADVISORY: #12;All persons in the vicinity of this construction project are advised to respect all construction barricades and all posted safety/detour signs. Your patience, cooperation and understanding

  3. CONSTRUCTION NOTICE SUPPLEMENT For On-going Construction Project

    E-Print Network [OSTI]

    CONSTRUCTION NOTICE SUPPLEMENT For On-going Construction Project TO: Deans, Directors, Chairpersons routes are affected by this work. #12;ADVISORY: All persons in the vicinity of this construction project are advised to respect all construction barricades and all posted safety/detour signs. Your patience

  4. Cold-start characteristics of polymer electrolyte fuel cells

    SciTech Connect (OSTI)

    Mishler, Jeff [Los Alamos National Laboratory; Mukundan, Rangachary [Los Alamos National Laboratory; Wang, Yun [UNIV. CAL. RIVERSIDE; Mishler, Jeff [UNIV. CAL. RIVERSIDE; Mukherjee, Partha P [ORNL

    2010-01-01

    In this paper, we investigate the electrochemical reaction kinetics, species transport, and solid water dynamics in a polymer electrolyte fuel cell (PEFC) during cold start. A simplitied analysis is developed to enable the evaluation of the impact of ice volume fraction on cell performance during coldstart. Supporting neutron imaging data are also provided to reveal the real-time water evolution. Temperature-dependent voltage changes due to the reaction kinetics and ohmic loss are also analyzed based on the ionic conductivity of the membrane at subfreezing temperature. The analysis is valuable for the fundamental study of PEFC cold-start.

  5. 1920 IEEE TRANSACTIONS ON MAGNETICS, VOL. 40, NO. 4, JULY 2004 Improving the Starting Performance of Large

    E-Print Network [OSTI]

    Mi, Chunting "Chris"

    of the starting system of the salient-pole synchronous machines in a pumping-generating plant. We focused of Large Salient-Pole Synchronous Machines Haran Karmaker, Senior Member, IEEE, and Chunting Mi, Senior of the generator/motor units. The predicted results from both the FEA model and the analytical model agree well

  6. 2015 Construction Safety Workshop Presentations

    Broader source: Energy.gov [DOE]

    2015 Construction Safety Workshop Presentations, June 16, 2015 - Forrestal Building - Washington, DC

  7. Construction quality assurance report

    SciTech Connect (OSTI)

    Roscha, V.

    1994-09-08

    This report provides a summary of the construction quality assurance (CQA) observation and test results, including: The results of the geosynthetic and soil materials conformance testing. The observation and testing results associates with the installation of the soil liners. The observation and testing results associated with the installation of the HDPE geomembrane liner systems. The observation and testing results associated with the installation of the leachate collection and removal systems. The observation and testing results associated with the installation of the working surfaces. The observation and testing results associated with in-plant manufacturing process. Summary of submittal reviews by Golder Construction Services, Inc. The submittal and certification of the piping material specifications. The observation and verification associated of the Acceptance Test Procedure results of the operational equipment functions. Summary of the ECNs which are incorporated into the project.

  8. Toward a constructive physics

    SciTech Connect (OSTI)

    Noyes, H.P.; Gefwert, C.; Manthey, M.J.

    1983-06-01

    We argue that the discretization of physics which has occurred thanks to the advent of quantum mechanics has replaced the continuum standards of time, length and mass which brought physics to maturity by counting. The (arbitrary in the sense of conventional dimensional analysis) standards have been replaced by three dimensional constants: the limiting velocity c, the unit of action h, and either a reference mass (eg m/sub p/) or a coupling constant (eg G related to the mass scale by hc/(2..pi..Gm/sub p//sup 2/) approx. = 1.7 x 10/sup 38/). Once these physical and experimental reference standards are accepted, the conventional approach is to connect physics to mathematics by means of dimensionless ratios. But these standards now rest on counting rather than ratios, and allow us to think of a fourth dimensionless mathematical concept, which is counting integers. According to constructive mathematics, counting has to be understood before engaging in the practice of mathematics in order to avoid redundancy. In its strict form constructive mathematics allows no completed infinities, and must provide finite algorithms for the computation of any acceptable concept. This finite requirement in constructive mathematics is in keeping with the practice of physics when that practice is restricted to hypotheses which are testable in a finite time. In this paper we attempt to outline a program for physics which will meet these rigid criteria while preserving, in so far as possible, the successes that conventional physics has already achieved.

  9. Quick Start Guide: Completing Your CHP November 2014

    E-Print Network [OSTI]

    Brown, Sally

    Quick Start Guide: Completing Your CHP November 2014 This Laboratory Safety Manual (LSM) is your of what the Washington Department of Labor and Industries calls a "Chemical Hygiene Plan (CHP)." The CHP is required for all laboratories that use hazardous chemicals. EH&S developed much of your CHP for you

  10. Capital Assets...Start to Finish Business & Financial Services

    E-Print Network [OSTI]

    their inventory responsibilities #12;CAPITAL ASSETS · Capital Items ­ Equipment that has an acquisition cost of $5Capital Assets...Start to Finish Business & Financial Services Property Management Professional & Roles Acquisition Tracking Disposition #12;PROPERTY MANGEMENT OVERVIEW · Record and track capital assets

  11. LBTO Forest Fire Contingency Plan 5 Doc_info_start

    E-Print Network [OSTI]

    Ziurys, Lucy M.

    LBTO Forest Fire Contingency Plan 5 Doc_info_start Title: LBTO Forest Fire Contingency Plan: Date_of_Release: File Type: MS Word Local Name: LBTO Forest Fire Contingency Plan Category: Overview: 004s001 Revision: a Doc_info_end #12;LBTO Forest Fire Contingency Plan 4 TO SECURE THE LBTO ENCLOSURE

  12. Advanced Research Compu2ng Before We Start

    E-Print Network [OSTI]

    Crawford, T. Daniel

    Advanced Research Compu2ng Before We Start · Sign in · If you would like Research Compu2ng Outline · Introduc2on · Snow Basics · Examples · Conclusions #12;Advanced Research Compu2ng 4 INTRODUCTION #12;Advanced Research Compu2ng R

  13. Search Technology Internet Start-Ups Business Computing Companies

    E-Print Network [OSTI]

    Oyet, Alwell

    #12;Search Technology Internet Start-Ups Business Computing Companies Inside Technology Bits Blog Bits Blog Personal Tech Pogue's Posts More Articles in Technology » Today's Headlines Daily E-Mail Ads.com Technology WORLD U.S. N.Y. / REGION BUSINESS TECHNOLOGY SCIENCE HEALTH SPORTS OPINION ARTS STYLE TRAVEL JOBS

  14. Start Paint Branch Dr End 3501 University Blvd E

    E-Print Network [OSTI]

    Maryland at College Park, University of

    Start Paint Branch Dr End 3501 University Blvd E Hyattsville, MD 20783 Travel 1.3 mi ­ about 5 mins ©2008 Google - Map data ©2008 NAVTEQTM - Terms of Use Page 1 of 2Paint Branch Dr to 3501 University Blvd E, Hyattsville, MD 20783 - Google Maps 6/1/2008http://maps.google.com/maps?f=d&hl=en&geocode=&saddr=Paint

  15. Eleven Tribes Jump START Clean Energy Projects, Summer 2012 (Newsletter)

    SciTech Connect (OSTI)

    Not Available

    2012-06-01

    This newsletter describes key activities of the DOE Office of Indian Energy Policy and Programs for Summer 2012. The U.S. Department of Energy Office of Indian Energy Policy and Programs (DOE-IE) has selected 11 Tribes - five in Alaska and six in the contiguous United States - to receive on-the-ground technical support for community-based energy efficiency and renewable energy projects as part of DOE-IE's Strategic Technical Assistance Response Team (START) Program. START finalists were selected based on the clarity of their requests for technical assistance and the ability of START to successfully work with their projects or community. Technical experts from DOE and its National Renewable Energy Laboratory (NREL) will work directly with community-based project teams to analyze local energy issues and assist the Tribes in moving their projects forward. In Alaska, the effort will be bolstered by DOE-IE's partnership with the Denali Commission, which will provide additional assistance and expertise, as well as funding to fuel the Alaska START initiative.

  16. Get started with the Internet of Things in

    E-Print Network [OSTI]

    Chaudhuri, Surajit

    Get started with the Internet of Things in your organization Introducing Microsoft Azure Internet the Internet of Things (IoT). When you see definitions and hype about IoT, it's easy to feel overwhelmed. When on the flexible and scalable Microsoft Cloud Platform. With Microsoft Azure Internet of Things services, you can

  17. Investigation and demonstration of a rich combustor cold-start device for alcohol-fueled engines

    SciTech Connect (OSTI)

    Hodgson, J.W.; Irick, D.K. [Univ. of Tennessee, Knoxville, TN (United States)] [Univ. of Tennessee, Knoxville, TN (United States)

    1998-04-01

    The authors have completed a study in which they investigated the use of a rich combustor to aid in cold starting spark-ignition engines fueled with either neat ethanol or neat methanol. The rich combustor burns the alcohol fuel outside the engine under fuel-rich conditions to produce a combustible product stream that is fed to the engine for cold starting. The rich combustor approach significantly extends the cold starting capability of alcohol-fueled engines. A design tool was developed that simulates the operation of the combustor and couples it to an engine/vehicle model. This tool allows the user to determine the fuel requirements of the rich combustor as the vehicle executes a given driving mission. The design tool was used to design and fabricate a rich combustor for use on a 2.8 L automotive engine. The system was tested using a unique cold room that allows the engine to be coupled to an electric dynamometer. The engine was fitted with an aftermarket engine control system that permitted the fuel flow to the rich combustor to be programmed as a function of engine speed and intake manifold pressure. Testing indicated that reliable cold starts were achieved on both neat methanol and neat ethanol at temperatures as low as {minus}20 C. Although starts were experienced at temperatures as low as {minus}30 C, these were erratic. They believe that an important factor at the very low temperatures is the balance between the high mechanical friction of the engine and the low energy density of the combustible mixture fed to the engine from the rich combustor.

  18. TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT

    SciTech Connect (OSTI)

    LESKO KF; BERRIOCHOA MV

    2010-02-26

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, "Management of Construction Projects, A Constructor's Perspective", University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by URS personnel. Each small contractor is mentored and supported utilizing the principles of the Construction Industry Institute (CII) Partnering process. Some of the key mentoring and partnering areas that are explored in this paper are, internal and external safety professional support, subcontractor safety teams and the interface with project and site safety teams, quality assurance program support to facilitate compliance with NQA-1, construction, team roles and responsibilities, work definition for successful fixed price contracts, scheduling and interface with project schedules and cost projection/accruals. The practical application of the CII Partnering principles, with the Construction Management expertise of URS, has led to a highly successful construction model that also meets small business contracting goals.

  19. High Performance New Construction 

    E-Print Network [OSTI]

    Flores, M.

    2013-01-01

    -Build • Age Myth • Cost Myth • Complexity Myth • Time Advantage • Early Cost Confirmation • Lower Cost For Design Changes ESL-KT-13-12-40 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16-18 What It Means … When... Energy Efficiency Conference, San Antonio, Texas Dec. 16-18 Facility Economics – Building Costs Over 40 yrs. Construction Financing Alterations Operations & Utility Costs 11% 14% 25% 50% ESL-KT-13-12-40 CATEE 2013: Clean Air Through Energy Efficiency...

  20. Construction Readiness RM

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (BillionProvedTravel TravelChallenges |1-01Concentrating Solar PowerBlogExperience |Construction

  1. The start-up of the DIOS pilot plant (DIOS Project)

    SciTech Connect (OSTI)

    Sawada, Terutoshi

    1995-12-01

    The DIOS process has been successfully developed as an 8-year project commenced in April 1988. Based on the results of the element studies reported at the previous conference and at other meetings, the pilot plant, with a designed capacity of 500 t/d, was constructed and started up in october 1993. After the starting operation with the single smelting reduction furnace in the beginning of the first campaign, the pilot plant has been principally operated in integration, that is, with the smelting reduction furnace connected with the preheating and prereduction furnaces. So far five campaigns have been successfully conducted on schedule. The operation has been improved gradually and the designed performance has been achieved. New processes are targeted at the direct use of coal and iron ore fines to eliminate not only the problematic coke ovens but also pellet and sinter plants. The direct smelting reduction processes currently at the most advanced stage of development are the DIOS in Japan, the AISI in the USA and the HIsmelt in Australia.

  2. Alternative Constructions Alternative Constructions of Science and Science Education

    E-Print Network [OSTI]

    Cobern, William W.

    Alternative Constructions Alternative Constructions of Science and Science Education A plenary;Alternative Constructions 2 I want to begin today with two short personal remarks. My field of research of one's position on the singularity of science proper; one ought to consider alternative, culturally

  3. Starting low compression ratio rotary Wankel diesel engine

    SciTech Connect (OSTI)

    Kamo, R.; Yamada, T.Y.; Hamada, Y.

    1987-01-01

    The single stage rotary Wankel engine is difficult to convert into a diesel version having an adequate compression ratio and a compatible combustion chamber configuration. Past efforts in designing a rotary-type Wankel diesel engine resorted to a two-stage design. Complexity, size, weight, cost and performance penalties were some of the drawbacks of the two-stage Wankel-type diesel designs. This paper presents an approach to a single stage low compression ratio Wankel-type rotary engine. Cold starting of a low compression ratio single stage diesel Wankel becomes the key problem. It was demonstrated that the low compression single stage diesel Wankel type rotary engine can satisfactorily be cold started with a properly designed combustion chamber in the rotor and a variable heat input combustion aid.

  4. Major_Projects_Quick_Starts_Jobs_Creation_Office_Clean_Coal.pdf...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MajorProjectsQuickStartsJobsCreationOfficeCleanCoal.pdf MajorProjectsQuickStartsJobsCreationOfficeCleanCoal.pdf MajorProjectsQuickStartsJobsCreationOfficeCle...

  5. Long pulse EBW start-up experiments in MAST

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shevchenko, V. F.; Baranov, Y. F.; Bigelow, T.; Caughman, J. B.; Diem, S.; Dukes, C.; Finburg, P.; Hawes, J.; Gurl, C.; Griffiths, J.; et al

    2015-03-12

    Start-up technique reported here relies on a double mode conversion (MC) for electron Bernstein wave (EBW) excitation. It consists of MC of the ordinary (O) mode, entering the plasma from the low field side of the tokamak, into the extraordinary (X) mode at a mirror-polarizer located at the high field side. The X mode propagates back to the plasma, passes through electron cyclotron resonance (ECR) and experiences a subsequent X to EBW MC near the upper hybrid resonance (UHR). Finally the excited EBW mode is totally absorbed at the Doppler shifted ECR. The absorption of EBW remains high even inmore »cold rarefied plasmas. Furthermore, EBW can generate significant plasma current giving the prospect of a fully solenoid-free plasma start-up. First experiments using this scheme were carried out on MAST [1]. Plasma currents up to 33 kA have been achieved using 28 GHz 100kW 90ms RF pulses. Recently experimental results were extended to longer RF pulses showing further increase of plasma currents generated by RF power alone. A record current of 73kA has been achieved with 450ms RF pulse of similar power. The current drive enhancement was mainly achieved due to RF pulse extension and further optimisation of the start-up scenario.« less

  6. Univalent Foundation and Constructive Mathematics

    E-Print Network [OSTI]

    Coquand, Thierry

    Univalent Foundation and Constructive Mathematics Thierry Coquand Luminy, April 7, 2014 #12;Univalent Foundation and Constructive Mathematics References on univalent foundation V. Voevodsky Univalent foundation home page and "Experimental library of univalent foundation of mathematics" B. Ahrens. C. Kapulkin

  7. The 4-dimensional masonry construction

    E-Print Network [OSTI]

    Davis, Lara K. (Lara Katherine)

    2010-01-01

    This design-research thesis - The 4-Dimensional Masonry Construction - presents innovation in the design and construction of thin-shell tile vaulted structures. The core research contributions of this thesis are: #1 Testing ...

  8. Engineering Accomplishments in the Construction of NCSX

    SciTech Connect (OSTI)

    G. H. Neilson; P.J. Heitzenroeder; B.E. Nelson; W.T. Reiersen; A. Brooks; T.G. Brown; J.H. Chrzanowski; M.J. Cole; F. Dahlgren; T. Dodson; L.E. Dudek; R.A. Ellis; H.M. Fan; P.J. Fogarty; K.D. Freudenberg; P.L. Goranson; J.H. Harris; M.R. Kalish; G. Labik; J.F. Lyon; N. Pomphrey; C.D. Priniski; S. Raftopoulos; D.J. Rej; W.R. Sands; R.T. Simmons; B.E. Stratton; R.L. Strykowsky; M.E. Viola; D.E. Williamson; M.C. Zarnstorff

    2008-09-01

    The National Compact Stellarator Experiment (NCSX) was designed to test a compact, quasiaxisymmetric stellarator configuration. Flexibility and accurate realization of its complex 3D geometry were key requirements affecting the design and construction. While the project was terminated before completing construction, there were significant engineering accomplishments in design, fabrication, and assembly. The design of the stellarator core device was completed. All of the modular coils, toroidal field coils, and vacuum vessel sectors were fabricated. Critical assembly steps were demonstrated. Engineering advances were made in the application of CAD modeling, structural analysis, and accurate fabrication of complex-shaped components and subassemblies. The engineering accomplishments of the project are summarized

  9. Construction of Articulated Models from Range Data

    E-Print Network [OSTI]

    Ashbrook, A.P.; Fisher, R.B.; Robertson, C.; Werghi, N.

    Ashbrook,A.P. Fisher,R.B. Robertson,C. Werghi,N. Proceedings of the British Machine Vision Conference, BMVC'99 (Nottingham) pp 183-192

  10. Biomass Scenario Model Scenario Library: Definitions, Construction...

    Office of Scientific and Technical Information (OSTI)

    phase reforming. Multiple products can be produced, including gasoline, diesel, and jet fuel. The oil crops module captures development of conversion capacity for soy-to-refinery...

  11. Biomass Scenario Model Scenario Library: Definitions, Construction...

    Office of Scientific and Technical Information (OSTI)

    S. 09 BIOMASS FUELS; 59 BASIC BIOLOGICAL SCIENCES; 29 ENERGY PLANNING, POLICY AND ECONOMY BIOMASS; BIOFUEL; BSM; SYSTEM DYNAMICS; BIOFUEL INCENTIVES; SCENARIOS; Bioenergy;...

  12. On the consistent use of Constructed Observables

    E-Print Network [OSTI]

    Trott, Michael

    2015-01-01

    We define "constructed observables" as relating experimental measurements to terms in a Lagrangian while simultaneously making assumptions about possible deviations from the Standard Model (SM), in other Lagrangian terms. Ensuring that the SM effective field theory (EFT) is constrained correctly when using constructed observables requires that their defining conditions are imposed on the EFT in a manner that is consistent with the equations of motion. Failing to do so can result in a "functionally redundant" operator basis and the wrong expectation as to how experimental quantities are related in the EFT. We illustrate the issues involved considering the $\\rm S$ parameter and the off shell triple gauge coupling (TGC) verticies. We show that the relationships between $h \\rightarrow V \\bar{f} \\, f$ decay and the off shell TGC verticies are subject to these subtleties, and how the connections between these observables vanish in the limit of strong bounds due to LEP. The challenge of using constructed observables...

  13. Widget:ExpandableTextStart | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThinWarsaw,What Is aDisqusHelper Jump to:ExpandableTextStart Jump

  14. Property:Building/StartPeriod | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceIIInformationEnergy InformationInformation Total Jump to:StartPeriod

  15. Getting Started on ALCF Resources | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunitiesNERSC Getting Started at NERSC June 7, 2011

  16. Getting Started | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunitiesNERSC Getting Started at NERSC June 7,

  17. Building wall construction

    SciTech Connect (OSTI)

    Mulford, C.E.

    1987-04-21

    A building wall construction is described comprising, in combination: (a) an elongated top plate; (b) an elongated bottom plate extending in spaced, horizontal, parallel relation to the top plate; (c) elongated studs arranged in spaced, vertical, parallel relation and affixed at their upper and lower ends to the top and bottom plates, respectively; (d) each of the studs, top plates and bottom plates comprises a pair of spaced wooden members of equal length having a substantially rectangular groove centrally disposed in one face thereof extending for the entire length of the wooden members, and at least one web member of fire-rated gypsum board having opposite, marginal edge portions secured in the grooves; (e) sheathing layers affixed to both sides of the stud members and extending vertically between the bottom and top plates, and horizontally between the studs to enclose the space therebetween; and (f) at least one panel member of fire-rated gypsum board extending horizontally between each successive pair of studs parallel to and spaced from each of the sheathing layers, thus providing at least two, separated spaces between the sheathing layers.

  18. Frequency-Sweeping Alfvén Instabilities Driven by Super-Alfvénic Beams in the Spherical Tokamak START

    E-Print Network [OSTI]

    Frequency-Sweeping Alfvén Instabilities Driven by Super-Alfvénic Beams in the Spherical Tokamak START

  19. START Program for Renewable Energy Project Development Assistance – Round Three Application

    Broader source: Energy.gov [DOE]

    Download the application for the START Program for Renewable Energy Project Development Assistance–Round Three.

  20. Long Pulse EBW Start-up Experiments in MAST

    E-Print Network [OSTI]

    Shevchenko, V F; Caughman, J B; Diem, S; Mailloux, J; Brien, M R O; Peng, M; Saveliev, A N; Takase, Y; Tanaka, H; Taylor, G

    2015-01-01

    The non-solenoid start-up technique reported here relies on a double mode conversion for electron Bernstein wave (EBW) excitation. It consists of the mode conversion of the ordinary mode, entering the plasma from the low field side of the tokamak, into the extraordinary (X) mode at a mirror-polarizer located at the high field side. The X mode propagates back to the plasma, passes through electron cyclotron resonance and experiences a subsequent X to EBW mode conversion near the upper hybrid resonance. Finally the excited EBW mode is totally absorbed at the Doppler shifted electron cyclotron resonance. The absorption of EBW remains high even in cold rarefied plasmas. Furthermore, EBW can generate significant plasma current giving the prospect of a fully solenoid-free plasma start-up. First experiments using this scheme were carried out on MAST [V. Shevchenko et al, Nuclear Fusion 50, 022004 (2010)]. Plasma currents up to 33 kA have been achieved using 28 GHz 100kW 90ms RF pulses. Recently experimental results ...

  1. MODULAR CONSTRUCTION SYSTEM EVALUATION

    SciTech Connect (OSTI)

    S. Gillespie

    2002-08-08

    The purpose of this study is to respond to U.S. Department of Energy (DOE) Technical Direction Letter (TDL) 02-003 (Waisley 2001), which directs Bechtel SAIC Company, LLC (BSC) to complete a design study to recommend repository design options to support receipt and/or emplacement of any or all of the following: commercial spent nuclear fuel (CSNF), high-level radioactive waste (HLW), DOE-managed spent nuclear fuel (DSNF) (including naval spent nuclear fuel [SNF]), and immobilized plutonium (if available), as soon as practicable, but no later than 2010. From the possible design options, a recommended approach will be determined for further evaluation to support the preliminary design of the repository. This study integrates the results of the repository Design Evolution Study (Rowe 2002) with supporting studies concerning national transportation options (BSC 2002b) and Nevada transportation options (Gehner 2002). The repository Design Evolution Study documents the processes used to reevaluate the design, construction, operation, and cost of the repository in response to TDL 02-003 (Waisley 2001), and to determine possible repository conceptual design options. The transportation studies evaluate the national and Nevada transportation options that support the repository conceptual design options. An evaluation methodology was established, based on Program-level requirements developed for the study in reference BSC 2001a, to allow the repository and system design options to be evaluated on a consistent basis. The transportation options and the design components were integrated into system design implementation options, which were evaluated using receipt and emplacement scenarios. The scenarios tested the ability of the design concept to adapt to changes in funding, waste receipt rate, and Nevada rail transportation availability. The results of the evaluation (in terms of system throughput, cost, and schedule) were then compared to the Program-level requirements, and recommendations for design alternatives, requirements changes, or further evaluation were developed.

  2. A Study of Dust Movement through Construction Barriers 

    E-Print Network [OSTI]

    Zhang, Wei

    2014-12-12

    that models a construction site in a laboratory setting. The results demonstrate movement of the dust occurs with the provision of an opening in a plastic construction wall. The filter collection system analysis showed that the distribution of the dust did...

  3. Integrating Safety into Design and Construction | Department...

    Office of Environmental Management (EM)

    Integrating Safety into Design and Construction Integrating Safety into Design and Construction DepSecMemoIntegratingSafetyInDesignAndConstruction05Dec2005.pdf More Documents &...

  4. Construction Tonology: The Case of Kalabari

    E-Print Network [OSTI]

    Harry, Otelemate; Hyman, Larry M

    2012-01-01

    of Nkoroo nominal constructions. In Eno-Abasi Urua, MosesPub. Booij, Geert. 2010. Construction Morphology. OxfordLab Annual Report (2012) Construction Tonology: The Case of

  5. FAQS Reference Guide – Construction Management

    Broader source: Energy.gov [DOE]

    This reference guide addresses the competency statements in the March 2004 edition of DOE-STD-1180-2004, Construction Management Functional Area Qualification Standard.

  6. Construction Work in Progress (Kansas)

    Broader source: Energy.gov [DOE]

    This Act allows nuclear power plants to qualify for recovery of Construction Work in Progress (CWIP) and other preconstruction expenditures in rates. Previously, nuclear power plants were excluded...

  7. Utility Power Plant Construction (Indiana)

    Broader source: Energy.gov [DOE]

    This statute requires a certificate of necessity from the Indiana Utility Regulatory Commission for the construction, purchase, or lease of an electricity generation facility by a public utility.

  8. Bing Concert Hall, Under Construction

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    Freidenrich Center, Under Construction Terman Engineering Center, Demolition Frost Amphitheater Ford Plaza Center Lyman Graduate Residences Sterling Quad Mirrielees Pearce Mitchell Houses Stanford Hospital

  9. Bing Concert Hall, Under Construction

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    Freidenrich Center, Under Construction Terman Engineering Center, Demolition Frost Amphitheater Ford Plaza Hall Cowell Houses Schwab Residential Center Lyman Graduate Residences Sterling Quad Mirrielees Pearce

  10. Bing Concert Hall, Under Construction

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    Center, Under Construction Terman Engineering Center, Demolition Frost Amphitheater Ford Plaza Galvez Houses Schwab Residential Center Lyman Graduate Residences Sterling Quad Mirrielees Pearce Mitchell

  11. Building accurate initial models using gain functions for waveform inversion in the Laplace domain

    E-Print Network [OSTI]

    Wansoo Ha; Changsoo Shin

    2014-08-20

    We suggest an initial model building technique using time gain functions in the Laplace domain. Applying the gain expressed as a power of time is equivalent to taking the partial derivative of the Laplace-domain wavefield with respect to a damping constant. We construct an objective function, which minimizes the logarithmic differences between the gained field data and the partial derivative of the modeled data with respect to the damping constant. We calculate the modeled wavefield, the partial derivative wavefield, and the gradient direction in the Laplace domain using the analytic Green's function starting from a constant velocity model. This is an efficient method to generate an accurate initial model for a following Laplace-domain inversion. Numerical examples using two marine field datasets confirm that a starting model updated once from a scratch using the gradient direction calculated with the proposed method can be successfully used for a subsequent Laplace-domain inversion.

  12. Dual-Fuel Truck Fleet: Start-Up Experience

    SciTech Connect (OSTI)

    NREL

    1998-09-30

    Although dual-fuel engine technology has been in development and limited use for several years, it has only recently moved toward full-scale operational capability for heavy-duty truck applications. Unlike a bifuel engine, which has two separate fuel systems that are used one at a time, a dual-fuel engine uses two fuel systems simultaneously. One of California's South Coast Air Quality Management District (SCAQMD) current programs is a demonstration of dual-fuel engine technology in heavy-duty trucks. These trucks are being studied as part of the National Renewable Energy Laboratory's (NREL's) Alternative Fuel Truck Program. This report describes the start-up experience from the program.

  13. Existing Commercial Reference Buildings Constructed Before 1980 — Archive

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary of building types and...

  14. Topobo : a 3-D constructive assembly system with kinetic memory

    E-Print Network [OSTI]

    Raffle, Hayes Solos, 1974-

    2004-01-01

    We introduce Topobo, a 3-D constructive assembly system em- bedded with kinetic memory, the ability to record and playback physical motion. Unique among modeling systems is Topobo's coincident physical input and output ...

  15. Compositions of constructed microbial mats

    DOE Patents [OSTI]

    Bender, Judith A. (Atlanta, GA); Phillips, Peter C. (Decatur, GA)

    1999-01-01

    Compositions and methods of use of constructed microbial mats, comprising cyanobacteria and purple autotrophic bacteria and an organic nutrient source, in a laminated structure, are described. The constructed microbial mat is used for bioremediation of different individual contaminants and for mixed or multiple contaminants, and for production of beneficial compositions and molecules.

  16. Lecture Compiler Construction Franz Wotawa

    E-Print Network [OSTI]

    Lecture Compiler Construction Franz Wotawa wotawa@ist.tugraz.at Institute for Software Technology Graz) Compiler Construction Summer term 2015 1 / 63 #12;Compilers are everywhere Programming languages compilers (HTML, LATEX,...) Means for communication between computers like XML Natural languages Compilers

  17. BUILDING PERFORMANCE ENGINEERING DURING CONSTRUCTION

    E-Print Network [OSTI]

    Toole, T. Michael

    1 BUILDING PERFORMANCE ENGINEERING DURING CONSTRUCTION T. Michael Toole1 and Matthew Hallowell2 of building performance engineering tasks on design-bid-build projects are typically provided by entities building construction projects. Twenty four building performance engineering tasks were required

  18. CONSTRUCTION OF NUCLEAR POWER PLANTS

    E-Print Network [OSTI]

    CONSTRUCTION OF NUCLEAR POWER PLANTS A Workshop on "NUCLEAR ENERGY RENAISSANCE" Addressing OF ST. LUCIE-2 at FLORIDA POWER & LIGHT COMPANY · Robert E. Uhrig 1974-1986 ­ Vice President, Nuclear IN CONSTRUCTION OF ST. LUCIE-2 #12;LESSONS LEARNED FROM St. Lucie-2 NUCLEAR POWER PLANTS CAN BE BUILT

  19. TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT TO SAFELY AND EFFECTIVELY COMPLETE NUCLEAR CONSTRUCTION WORK

    SciTech Connect (OSTI)

    LESO KF; HAMILTON HM; FARNER M; HEATH T

    2010-01-14

    Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small contractor is mentored and supported utilizing the principles of the Construction Industry Institute (CII) Partnering process. Some of the key mentoring and partnering areas that are explored in this paper are, internal and external safety professional support, subcontractor safety teams and the interface with project and site safety teams, quality assurance program support to facilitate compliance with NQA-1, construction, team roles and responsibilities, work definition for successful fixed price contracts, scheduling and interface with project schedules and cost projection/accruals. The practical application of the CII Partnering principles, with the Construction Management expertise of URS, has led to a highly successful construction model that also meets small business contracting goals.

  20. Application of the Veneziano model to the analysis of three pion charmonium decays

    SciTech Connect (OSTI)

    Szczepaniak, Adam P; Pennington, Michael R [JLAB

    2014-10-01

    We adapt the Veneziano model to the analysis of vector charmonium decays. Starting from a set of covariant Veneziano terms we show how to construct partial waves amplitudes that receive contributions from selected Regge trajectories. The amplitudes, nevertheless retain the proper asymptotic limit. This arises from duality between directly produced resonances and cross-channel Reggeon and in practical applications helps remove uncertainties in the parametrization of backgrounds.

  1. Passive-solar construction handbook

    SciTech Connect (OSTI)

    Levy, E.; Evans, D.; Gardstein, C.

    1981-02-01

    Many of the basic elements of passive solar design are reviewed. Passive solar construction is covered according to system type, each system type discussion including a general discussion of the important design and construction issues which apply to the particular system and case studies illustrating designed and built examples of the system type. The three basic types of passive solar systems discussed are direct gain, thermal storage wall, and attached sunspace. Thermal performance and construction information is presented for typical materials used in passive solar collector components, storage components, and control components. Appended are an overview of analysis methods and a technique for estimating performance. (LEW)

  2. Construction News Report January 2011

    E-Print Network [OSTI]

    . · Continued heating hot water piping on the 1st floor. · Completed sanitary and domestic on the 1st floor metal on the 3rd and 4th floors. · Started interior caulk at break metal on the 4th floor · Completed installation of frames and glass on the 2nd floor. · Completed installing backer rod at 1st and 2nd floor

  3. Contact and Stress Anisotropies in Start-Up Flow of Colloidal...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contact and Stress Anisotropies in Start-Up Flow of Colloidal Suspensions Authors: Martys, N.S., Lootens, D., George, W., and H Spatiotemporal correlations in start-up flows of...

  4. Fact #853 December 29, 2014 Stop/Start Technology is in nearly...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 December 29, 2014 StopStart Technology is in nearly 5% of All New Light Vehicles Produced Fact 853 December 29, 2014 StopStart Technology is in nearly 5% of All New Light...

  5. Postdoc position in machine learning for robot movement control ERC Starting Grant Project CONT-ACT

    E-Print Network [OSTI]

    information drives the development of high-performance, adaptive and robust planning and control methods year (renewable up to 3 years) Starting Date: June 1st or later Evaluation of candidates starts

  6. Order Module--DOE O 425.1D, VERIFICATION OF READINESS TO START...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5.1D, VERIFICATION OF READINESS TO START UP OR RESTART NUCLEAR FACILITIES Order Module--DOE O 425.1D, VERIFICATION OF READINESS TO START UP OR RESTART NUCLEAR FACILITIES "The...

  7. On the consistent use of Constructed Observables

    E-Print Network [OSTI]

    Michael Trott

    2015-01-17

    We define "constructed observables" as relating experimental measurements to terms in a Lagrangian while simultaneously making assumptions about possible deviations from the Standard Model (SM), in other Lagrangian terms. Ensuring that the SM effective field theory (EFT) is constrained correctly when using constructed observables requires that their defining conditions are imposed on the EFT in a manner that is consistent with the equations of motion. Failing to do so can result in a "functionally redundant" operator basis and the wrong expectation as to how experimental quantities are related in the EFT. We illustrate the issues involved considering the $\\rm S$ parameter and the off shell triple gauge coupling (TGC) verticies. We show that the relationships between $h \\rightarrow V \\bar{f} \\, f$ decay and the off shell TGC verticies are subject to these subtleties, and how the connections between these observables vanish in the limit of strong bounds due to LEP. The challenge of using constructed observables to consistently constrain the Standard Model EFT is only expected to grow with future LHC data, as more complex processes are studied.

  8. Dam Construction and Maintenance (Minnesota)

    Broader source: Energy.gov [DOE]

    Dams may be constructed, improved, or repaired on private, non-navigable waters subject to certain timelines; however, previously-developed hydropower mechanisms cannot be disrupted. The State may...

  9. Automatic Semigroups: Constructions and Subsemigroups

    E-Print Network [OSTI]

    St Andrews, University of

    Automatic Semigroups: Constructions and Subsemigroups Luis Descal#24;co Ph.D. Thesis University Semigroups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Automatic semigroups . . . . . . . . . . . . . . . . . . . . . . . . 9 2 Syntactic monoids and the free group 18 1 Automatic structure

  10. The valuation of construction companies

    E-Print Network [OSTI]

    Sassine, Edmond, 1980-

    2004-01-01

    The main objective of this thesis is to study the valuation of construction companies in mergers and acquisitions. The thesis is divided into three main parts; Mergers and Acquisitions, Valuation, and a Case Study. Mergers ...

  11. Relay Attacks on Passive Keyless Entry and Start Systems in Modern Cars

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Relay Attacks on Passive Keyless Entry and Start Systems in Modern Cars Aur´elien Francillon, Boris and Start (PKES) systems used in modern cars. We build two efficient and inexpensive attack realizations, wired and wireless physical-layer relays, that allow the attacker to en- ter and start a car by relaying

  12. Quick start guide for IBM Cognos 8 Business Intelligence online trial

    E-Print Network [OSTI]

    Quick start guide for IBM Cognos 8 Business Intelligence online trial IBM Cognos 8 Business Intelligence comes with a "Quick Tour" and a "Getting Started Guide". It is recommended that you take Cognos 8 Business Intelligence" in the "Getting Started Guide". The "IBM Cognos Connection" is the portal

  13. Start-up Optimization of a Combined Cycle Power Plant A. Linda, E. Sllberga,

    E-Print Network [OSTI]

    Start-up Optimization of a Combined Cycle Power Plant A. Linda, E. Sällberga, S. Velutb, S the dynamic start-up procedure of a com- bined cycle power plant can be optimized using di- rect collocation. Keywords: Combined Cycle Power Plants, Start-up, Dynamic optimization, Optimica, Control, Modelica

  14. (c) 2014 Robert W Heath Jr. WHAT STARTS HERE CHANGES THE WORLD

    E-Print Network [OSTI]

    Heath Jr., - Robert W.

    (c) 2014 Robert W Heath Jr. WHAT STARTS HERE CHANGES THE WORLD Robert W. Heath Jr., Ph.D., P STARTS HERE CHANGES THE WORLD (c) 2014 Robert W Heath Jr. 2 mmWave beamforming mmWave for tactical ad hoc @ UT Austin 11 PhD students #12;WHAT STARTS HERE CHANGES THE WORLD (c) 2014 Robert W Heath Jr. MIMO

  15. 1. What year did you first start fishing in saltwater? 2. What year did you first start fishing from the shore in saltwater?

    E-Print Network [OSTI]

    1. What year did you first start fishing in saltwater? 19______ 2. What year did you first start fishing from the shore in saltwater? 19______ 3. In the past 12 months, how many days did you go saltwater fishing from: _______ DAYS THE SHORE IN MASSACHUSETTS _______ DAYS A PARTYBOAT IN MASSACHUSETTS

  16. 1. What year did you first start fishing in saltwater? 2. What year did you first start fishing from partyboats in saltwater?

    E-Print Network [OSTI]

    1. What year did you first start fishing in saltwater? 19______ 2. What year did you first start fishing from partyboats in saltwater? 19______ 3. In the past 12 months, how many days did you go saltwater fishing from: _______ DAYS A PARTYBOAT IN MASSACHUSETTS _______ DAYS A PARTYBOAT IN ANOTHER STATE

  17. The effect of shot noise on the start up of the fundamental and harmonics in free-electron lasers

    SciTech Connect (OSTI)

    Freund, H. P.; Miner, W. H. Jr.; Giannessi, L.

    2008-12-15

    The problem of radiation start up in free-electron lasers (FELs) is important in the simulation of virtually all FEL configurations including oscillators and amplifiers in both seeded master oscillator power amplifier (MOPA) and self-amplified spontaneous emission (SASE) modes. Both oscillators and SASE FELs start up from spontaneous emission due to shot noise on the electron beam, which arises from the random fluctuations in the phase distribution of the electrons. The injected power in a MOPA is usually large enough to overwhelm the shot noise. However, this noise must be treated correctly in order to model the initial start up of the harmonics. In this paper, we discuss and compare two different shot noise models that are implemented in both one-dimensional wiggler-averaged (PERSEO) and non-wiggler-averaged (MEDUSA1D) simulation codes, and a three-dimensional non-wiggler-averaged (MEDUSA) formulation. These models are compared for examples describing both SASE and MOPA configurations in one dimension, in steady-state, and time-dependent simulations. Remarkable agreement is found between PERSEO and MEDUSA1D for the evolution of the fundamental and harmonics. In addition, three-dimensional correction factors have been included in the MEDUSA1D and PERSEO, which show reasonable agreement with MEDUSA for a sample MOPA in steady-state and time-dependent simulations.

  18. Major deepwater pipelay vessel starts work in North Sea

    SciTech Connect (OSTI)

    Heerema, E.P.

    1998-05-04

    Industry`s deepwater pipelaying capability has received a boost this year with the entry into the world`s fleet of Solitaire, a dynamically positioned pipelay vessel of about 350 m including stinger. The converted bulk carrier, formerly the Trentwood, will arrive on station in the North Sea and begin laying pipe this month on Statoil`s Europipe II project, a 600-km, 42-in. OD gas pipeline from Norway to Germany. Next year, the vessel will install pipe for the Exxon U.S.A.`s Gulf of Mexico South Diana development (East Breaks Block 945) in a water depth of 1,643 m and for Mobil Oil Canada as part of the Sable Island Offshore and Energy Project offshore Nova Scotia. Using the S-lay mode, Solitaire is particularly well-suited for laying large lines economically, including the deepwater projects anticipated for the US Gulf of Mexico. Table 1 presents Solitaire`s technical specifications. The design, construction, pipelaying, and justification for building vessels such as the Solitaire are discussed.

  19. Construction Design anD Materials

    E-Print Network [OSTI]

    Firewise Construction Design anD Materials #12;Firewise Construction Design anD Materials Peter a lecture on firewise construction that Peter presented for several years. Acknowledgements This publication Firewise Construction i #12;Firewise Construction Table of Contents 1. Introduction

  20. Reflective Cracking Study: Initial Construction, Phase 1 HVS Testing, and Overlay Construction

    E-Print Network [OSTI]

    Bejarano, Manuel O.; Jones, David; Morton, Bruce S.; Scheffy, Clark

    2008-01-01

    hq/esc/ctms/). Construction Manual. Sacramento, CA:Division of Construction. (http://www.dot.ca.gov/hq/Information, Test Pavements Construction, Pavement Materials

  1. The Relation between Lean Construction and Performance in the Korean Construction Industry

    E-Print Network [OSTI]

    Cho, Seongkyun

    2011-01-01

    in 2006 and overall construction waste decreased by 25% atperformance and reduce construction waste such as woodenbenchmarked waste reduction that Lean Construction academic

  2. Construction, Startup and Operation of a New LLRW Disposal Facility in Andrews County, Texas - 12151

    SciTech Connect (OSTI)

    Van Vliet, James A. [Waste Control Specialists LLC, Andrews County, Texas (United States)

    2012-07-01

    During this last year, Waste Control Specialists LLC (WCS) completed construction and achieved start of operations of a new low level radioactive waste (LLRW) disposal facility in Andrews County Texas. Disposal operations are underway for commercial LLRW, and start up evolutions are in progress for disposal of Department of Energy (DOE) LLRW. The overall approach to construction and start up are presented as well as some of the more significant challenges and how they were addressed to achieve initial operations of the first new commercial low level radioactive waste disposal facility in more than 30 years. The WCS disposal facility consists of two LLRW disposal cells, one for Texas Compact waste, and a separate disposal cell for DOE waste. Both disposal cells have very robust and unique designs. The cells themselves are constructed entirely in very low permeability red bed clay. The cell liners include a 0.91 meter thick clay liner meeting unprecedented permeability limits, 0.3 meter thick reinforced concrete barriers, as well as the standard geo-synthetic liners. Actions taken to meet performance criteria and install these liners will be discussed. Consistent with this highly protective landfill design, WCS chose to install a zero discharge site water management system. The considerations behind the design and construction of this system will be presented. Other activities essential to successful start of LLRW disposal operations included process and procedure development and refinement, staffing and staff development, and training. Mock ups were built and used for important evolutions and functions. Consistent with the extensive regulation of LLRW operations, engagement with the Texas Commission on Environmental Quality (TCEQ) was continuous and highly interactive. This included daily activity conference calls, weekly coordination calls and numerous topical conference calls and meetings. TCEQ staff and consultants frequently observed specific construction evolutions, such as geological feature mapping of designated excavation faces, disposal cell clay liner installation, disposal cell concrete barrier construction, etc. (author)

  3. Quick Start Guide Cisco Small Business Pro IP Phone

    E-Print Network [OSTI]

    Cerveny, Vlastislav

    are using an external power source, insert one end of the power cord into an outlet and insert the other end of the power cord into the power port on the phone body. STEP 7 Connect your phone to the network: · Using to the network and receives a basic configuration, your phone line keys should glow green (on models with phone

  4. Choosing a Starting Configuration for Particle Swarm Optimization

    E-Print Network [OSTI]

    Martinez, Tony R.

    with the standard PSO algorithm on several standard test functions. Results suggest that CVT initialization improves PSO performance in high-dimensional spaces. I. INTRODUCTION Particle Swarm Optimization (PSO functions [7][8]. PSO models the search through the problem space as the flight of a swarm of particles

  5. Habemus Superstratum! A constructive proof of the existence of superstrata

    E-Print Network [OSTI]

    Bena, Iosif; Russo, Rodolfo; Shigemori, Masaki; Warner, Nicholas P

    2015-01-01

    We construct the first example of a superstratum: a class of smooth horizonless supergravity solutions that are parameterized by arbitrary continuous functions of (at least) two variables and have the same charges as the supersymmetric D1-D5-P black hole. We work in Type IIB string theory on T^4 or K3 and our solutions involve a subset of fields that can be described by a six-dimensional supergravity with two tensor multiplets. The solutions can thus be constructed using a linear structure, and we give an explicit recipe to start from a superposition of modes specified by an arbitrary function of two variables and impose regularity to obtain the full horizonless solutions in closed form. We also give the precise CFT description of these solutions and show that they are not dual to descendants of chiral primaries. They are thus much more general than all the known solutions whose CFT dual is precisely understood. Hence our construction represents a substantial step toward the ultimate goal of constructing the ...

  6. Habemus Superstratum! A constructive proof of the existence of superstrata

    E-Print Network [OSTI]

    Iosif Bena; Stefano Giusto; Rodolfo Russo; Masaki Shigemori; Nicholas P. Warner

    2015-03-04

    We construct the first example of a superstratum: a class of smooth horizonless supergravity solutions that are parameterized by arbitrary continuous functions of (at least) two variables and have the same charges as the supersymmetric D1-D5-P black hole. We work in Type IIB string theory on T^4 or K3 and our solutions involve a subset of fields that can be described by a six-dimensional supergravity with two tensor multiplets. The solutions can thus be constructed using a linear structure, and we give an explicit recipe to start from a superposition of modes specified by an arbitrary function of two variables and impose regularity to obtain the full horizonless solutions in closed form. We also give the precise CFT description of these solutions and show that they are not dual to descendants of chiral primaries. They are thus much more general than all the known solutions whose CFT dual is precisely understood. Hence our construction represents a substantial step toward the ultimate goal of constructing the fully generic superstratum that can account for a finite fraction of the entropy of the three-charge black hole in the regime of parameters where the classical black hole solution exists.

  7. Bosch, F, Turkan, Y, Haas, C T and Haas, R (2009) Fusing 4D modelling and laser scanning for construction schedule control. In: Egbu, C. (Ed) Procs 26th Annual ARCOM Conference, 6-8

    E-Print Network [OSTI]

    Bosché, Frédéric

    2009-01-01

    , University of Waterloo, Canada The construction industry remains one of the riskiest of all. This risk it too time- and labour-intensive. However, the progress made in the last two decades in 3D (even 4D scheme aimed at better transferring risk from the government (the client) to the contractors and thus

  8. Collaborative Unit Construction in Korean: Pivot Turns

    E-Print Network [OSTI]

    Ju, Hee

    2011-01-01

    A. (1996). Practices in the construction of turns: the ‘TCU’Scheutz, H. (2005). Pivot constructions in spoken German. InM. (2000). The construction of units in conversational talk.

  9. Constructibility review process framework for transportation facilities 

    E-Print Network [OSTI]

    Liman, Majed

    1995-01-01

    Constructibility is the optimum use of construction knowledge and experience in planning, design, procurement, and field operations in order to achieve overall project objectives ("Constructibility: a primer" 1986). This Thesis presents a framework...

  10. Polymer Composites in Construction: An Overview

    E-Print Network [OSTI]

    Mosallam, AS; Bayraktar, A; Elmikawi, M; Pul, S; Adanur, S

    2015-01-01

    Pul S, Adanur S (2013) Polymer Composites in Construction:Pul S, Adanur S (2013) Polymer Composites in Construction:Mater Sci Eng 2(1), 25. Polymer Composites in Construction:

  11. Cogeneration project slated for construction

    SciTech Connect (OSTI)

    Not Available

    1993-09-13

    Destec Energy Inc. plans to begin construction of a 212-Mw gas-fired cogeneration plant in Polk County, Fla., late this year. The Houston-based firm will perform engineering and constructionmanagement services for the $150-million, combined-cycle project, but will call for proposals for construction services later this year, says project manager Bob Taylor. The plant north of Tampa, is scheduled to go on line in early 1995. All its electrical output will be sold to Florida Power Co. under a 30-year contract and process steam will go to the host, US Agrichemical Co., a large phosphate producer and fertilizer manufacturer.

  12. Construction Schedule | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit the followingConcentrating SolarConstruction Review Basic Energy Construction

  13. Topological Massive Sigma Models

    E-Print Network [OSTI]

    N. D. Lambert

    1995-05-03

    In this paper we construct topological sigma models which include a potential and are related to twisted massive supersymmetric sigma models. Contrary to a previous construction these models have no central charge and do not require the manifold to admit a Killing vector. We use the topological massive sigma model constructed here to simplify the calculation of the observables. Lastly it is noted that this model can be viewed as interpolating between topological massless sigma models and topological Landau-Ginzburg models.

  14. Summary of Construction Equipment Tests and Activities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Equipment Tests A series of tests were conducted by the APS Construction Vibration Measurement Task Force using various pieces of construction equipment at the APCF...

  15. (Electric and Gas) Residential New Construction Program

    Broader source: Energy.gov [DOE]

    The Energize CT offers a program designed to encourage the construction of energy efficient homes. The Residential New Construction Program offers incentives targeted at increasing energy...

  16. Roberta Oldenburg, LEED AP Mortenson Construction

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    - Hyperbaric Therapy, Milwaukee, WI Froedtert Hospital Renovation, Milwaukee, WI Wisconsin Energy Institute and Construction Facility Management Use of New Technology in Construction Sustainable Building: Energy Efficiency

  17. Register now at career.ucla.edu/JumpStart The JumpStart Series is a fee-based program open to currently registered UCLA students.

    E-Print Network [OSTI]

    Ferguson, Thomas S.

    . Blogs Winter 2015 Internship Search Wednesday, January 7, 4-7pm Engineering / Technology / Consulting-7pm Graduate Student JumpStart Engineering and Technology Thursday, Oct 16, 4-7pm #12;

  18. Our system for constructing Web

    E-Print Network [OSTI]

    de Lara, Juan

    Our system for constructing Web documents features visual interactive simulations and other. The methods and tools presented stress key points in the development of Web-based appli- cations such as main- tainability, reusability integration, and easy testing. T he Web is changing the way we work. We see

  19. AUTOMATIC PRESENTATIONS AND SEMIGROUP CONSTRUCTIONS

    E-Print Network [OSTI]

    St Andrews, University of

    AUTOMATIC PRESENTATIONS AND SEMIGROUP CONSTRUCTIONS Alan J. Cain1, Graham Oliver2, Nik Ruskuc3 nik@mcs.st-andrews.ac.uk, 4 rmt@mcs.le.ac.uk abstract An automatic presentation for a relational an automatic presentation is said to be FA-presentable. This pa- per studies the interaction of automatic

  20. Automatic presentations and semigroup constructions

    E-Print Network [OSTI]

    St Andrews, University of

    Automatic presentations and semigroup constructions Alan J. Cain1 , Graham Oliver2 , Nik Ruskuc3 nik@mcs.st-andrews.ac.uk, 4 rmt@mcs.le.ac.uk Abstract An automatic presentation for a relational an automatic presenta- tion is said to be FA-presentable. This paper studies the interac- tion of automatic

  1. ALGORITHMS FOR CONSTRUCTING COMPARATIVE MAPS

    E-Print Network [OSTI]

    Kleinberg, Jon

    (i.e. that the segments are homeologous). The construction of comparative maps between the genomes and phylogenetic relationships among species as well as fundamental principles of genome evolution. Comparative maps allow us to use structural and functional information about one genome to make predictions about

  2. CONSTRUCTING VIRTUAL HUMAN LIFE SIMULATIONS

    E-Print Network [OSTI]

    Kallmann, Marcelo

    , Virtual Environments, Behavioral Animation, Object Interaction, Python. 1. INTRODUCTION Virtual humanCONSTRUCTING VIRTUAL HUMAN LIFE SIMULATIONS Marcelo Kallmann, Etienne de Sevin and Daniel Thalmann human life simulations. Our main goal is to have virtual human actors living and working autonomously

  3. 2015 GRADUATE STUDIES CONSTRUCTION ENGINEERING

    E-Print Network [OSTI]

    Processes · Green Construction · Integrated Project Delivery System · Heavy Equipment and Automation at the Georgia Institute of Technology focuses on methods of building civil infrastructure projects for building and transportation-related infrastructure. The facility is equipped with a custom-built hybrid

  4. SuperShuttle CNG Fleet Start-Up Experience

    SciTech Connect (OSTI)

    Leslie Eudy.

    1999-05-18

    The Gas Research Institute (GRI) and the U.S. Department of Energy (DOE), along with several industry partners, are collaborating with SuperShuttle of Denver, Colorado, to evaluate natural gas vans added to the SuperShuttle fleet in 1999. Brand new (1999 model year) dedicated and bi-fuel compressed natural gas (CNG) vans manufactured by Ford Motor Company will be operated side-by-side with several similar gasoline vehicles in normal revenue service. Once the study is complete, DOE's National Renewable Energy Laboratory will analyze and compile the results for release.

  5. Cosmic Logic: a Computational Model

    E-Print Network [OSTI]

    Vitaly Vanchurin

    2015-07-05

    We describe a simple computational model of cosmic logic suitable for analysis of, for example, discretized cosmological systems. The construction is based on a particular model of computation, developed by Alan Turing, with cosmic observers (CO), cosmic measures (CM) and cosmic symmetries (CS) described by Turing machines. CO machines always start with a blank tape and CM machines take CO's Turing number (also known as description number or G{\\" o}del number) as input and output the corresponding probability. Similarly, CS machines take CO's Turing number as input, but output either one if the CO machines are in the same equivalence class or zero otherwise. We argue that CS machines are more fundamental than CM machines and, thus, should be used as building blocks in constructing CM machines. We prove the non-computability of a CS machine which discriminates between two classes of CO machines: mortal that halts in finite time and immortal that runs forever. In context of eternal inflation this result implies that it is impossible to construct CM machines to compute probabilities using cut-off prescriptions or that all of the cut-off measures are non-computable.

  6. Building Information Modeling (BIM), Utilized During the Design and Construction Phase of a Project Has the Potential to Create a Valuable Asset in Its Own Right ('BIMASSET') at Handover that in Turn Enhances the Value of the Development 

    E-Print Network [OSTI]

    Patrick, R.; Munir, M.; Jeffrey, H.

    2012-01-01

    the economic performance of a property/investment. 2.4 SIMILARITY WITH OTHER INDUSTRIES (IN THEORY AND PRACTICE) Similarities can be found with the IT and manufacturing industries. Theoretically, Lean Production goes in line with BIM methodology. BIM... is generally seen as a promising approach that would aid in achieving the principles of lean construction by reducing waste, improving efficiency, enhancing information management and improving communication (Gerber et al., 2010). The work of Khanzode et al...

  7. AVTA: 2010 Smart Fortwo Start-Stop Testing Results

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. Baseline data, which provides a point of comparison for the other test results, was collected at two different research laboratories. Baseline and other data collected at Idaho National Laboratory is in the attached documents. Baseline and battery testing data collected at Argonne National Laboratory is available in summary and CSV form on the Argonne Downloadable Dynometer Database site (http://www.anl.gov/energy-systems/group/downloadable-dynamometer-databas...). Taken together, these reports give an overall view of how this vehicle functions under extensive testing.

  8. A Fast Start-up On-Board Fuel Reformer for NOx Adsorber Regeneration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for NOx Adsorber Regeneration and Desulfation A Fast Start-up On-Board Fuel Reformer for NOx Adsorber Regeneration and Desulfation 2004 Diesel Engine Emissions Reduction (DEER)...

  9. The Art of the Start: Moving Science from the Lab to the Marketplace

    ScienceCinema (OSTI)

    Larry Bock

    2010-01-08

    April 25, 2009 Berkeley Lab Nano*High lecture: The Art of the Start: Moving Science from the Lab to the Marketplace

  10. Text-Alternative Version: L Prize-PAR 38 Competition: A New Start

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "L Prize-PAR 38 Competition: A New Start" webcast, held March 27, 2012.

  11. Evaluation of Neutron Radiography Reactor LEU-Core Start-Up Measurements

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bess, John D.; Maddock, Thomas L.; Smolinski, Andrew T.; Marshall, Margaret A.

    2014-11-04

    Benchmark models were developed to evaluate the cold-critical start-up measurements performed during the fresh core reload of the Neutron Radiography (NRAD) reactor with Low Enriched Uranium (LEU) fuel. Experiments include criticality, control-rod worth measurements, shutdown margin, and excess reactivity for four core loadings with 56, 60, 62, and 64 fuel elements. The worth of four graphite reflector block assemblies and an empty dry tube used for experiment irradiations were also measured and evaluated for the 60-fuel-element core configuration. Dominant uncertainties in the experimental keff come from uncertainties in the manganese content and impurities in the stainless steel fuel cladding asmore »well as the 236U and erbium poison content in the fuel matrix. Calculations with MCNP5 and ENDF/B-VII.0 neutron nuclear data are approximately 1.4% (9?) greater than the benchmark model eigenvalues, which is commonly seen in Monte Carlo simulations of other TRIGA reactors. Simulations of the worth measurements are within the 2? uncertainty for most of the benchmark experiment worth values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments.« less

  12. Nonlinear dynamics analysis of a membrane Stirling engine: Starting and stable operation

    E-Print Network [OSTI]

    Formosa, Fabien

    2013-01-01

    This paper presents the work devoted to the study of the operation of a miniaturized membrane Stirling engine. Indeed, such an engine relies on the dynamic coupling of the motion of two membranes to achieve a prime mover Stirling thermodynamic cycle. The modelling of the system introduces the large vibration amplitudes of the membrane as well as the nonlinear dissipative effects associated to the fluid flow within the engine. The nonlinearities are expressed as polynomial functions with quadratic and cubic terms. This paper displays the stability analysis to predict the starting of the engine and the instability problem which leads to the steady state behaviour. The centre manifold - normal form theory is used to obtain the simplest expression for the limit cycle amplitudes. The approach allows the reduction of the number of equations of the original system in order to obtain a simplified system, without loosing the dynamics of the original system as well as the contributions of non-linear terms. The model in...

  13. Evaluation of Neutron Radiography Reactor LEU-Core Start-Up Measurements

    SciTech Connect (OSTI)

    Bess, John D.; Maddock, Thomas L.; Smolinski, Andrew T.; Marshall, Margaret A.

    2014-11-04

    Benchmark models were developed to evaluate the cold-critical start-up measurements performed during the fresh core reload of the Neutron Radiography (NRAD) reactor with Low Enriched Uranium (LEU) fuel. Experiments include criticality, control-rod worth measurements, shutdown margin, and excess reactivity for four core loadings with 56, 60, 62, and 64 fuel elements. The worth of four graphite reflector block assemblies and an empty dry tube used for experiment irradiations were also measured and evaluated for the 60-fuel-element core configuration. Dominant uncertainties in the experimental keff come from uncertainties in the manganese content and impurities in the stainless steel fuel cladding as well as the 236U and erbium poison content in the fuel matrix. Calculations with MCNP5 and ENDF/B-VII.0 neutron nuclear data are approximately 1.4% (9?) greater than the benchmark model eigenvalues, which is commonly seen in Monte Carlo simulations of other TRIGA reactors. Simulations of the worth measurements are within the 2? uncertainty for most of the benchmark experiment worth values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments.

  14. Evaluation of Neutron Radiography Reactor LEU-Core Start-Up Measurements

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    None

    2014-11-04

    Benchmark models were developed to evaluate the cold-critical start-up measurements performed during the fresh core reload of the Neutron Radiography (NRAD) reactor with Low Enriched Uranium (LEU) fuel. Experiments include criticality, control-rod worth measurements, shutdown margin, and excess reactivity for four core loadings with 56, 60, 62, and 64 fuel elements. The worth of four graphite reflector block assemblies and an empty dry tube used for experiment irradiations were also measured and evaluated for the 60-fuel-element core configuration. Dominant uncertainties in the experimental keff come from uncertainties in the manganese content and impurities in the stainless steel fuel cladding as well as the 236U and erbium poison content in the fuel matrix. Calculations with MCNP5 and ENDF/B-VII.0 neutron nuclear data are approximately 1.4% (9?) greater than the benchmark model eigenvalues, which is commonly seen in Monte Carlo simulations of other TRIGA reactors. Simulations of the worth measurements are within the 2? uncertainty for most of the benchmark experiment worth values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments.

  15. Direct Numerical Simulation of Surfactant-Stabilized Emulsions Morphology and Shear Viscosity in Starting Shear Flow

    SciTech Connect (OSTI)

    Roar Skartlien; Espen Sollum; Andreas Akselsen; Paul Meakin

    2012-07-01

    A 3D lattice Boltzmann model for two-phase flow with amphiphilic surfactant was used to investigate the evolution of emulsion morphology and shear stress in starting shear flow. The interfacial contributions were analyzed for low and high volume fractions and varying surfactant activity. A transient viscoelastic contribution to the emulsion rheology under constant strain rate conditions was attributed to the interfacial stress. For droplet volume fractions below 0.3 and an average capillary number of about 0.25, highly elliptical droplets formed. Consistent with affine deformation models, gradual elongation of the droplets increased the shear stress at early times and reduced it at later times. Lower interfacial tension with increased surfactant activity counterbalanced the effect of increased interfacial area, and the net shear stress did not change significantly. For higher volume fractions, co-continuous phases with a complex topology were formed. The surfactant decreased the interfacial shear stress due mainly to advection of surfactant to higher curvature areas. Our results are in qualitative agreement with experimental data for polymer blends in terms of transient interfacial stresses and limited enhancement of the emulsion viscosity at larger volume fractions where the phases are co-continuous.

  16. NRC Construction Light Source Flicker: What We

    E-Print Network [OSTI]

    California at Davis, University of

    NRC Construction Light Source Flicker: What We Need to Know, and Why You Should Care NRC Construction Jennifer A. Veitch, Ph.D. (c) 2013, National Research Council Canada #12;NRC Construction Handbook: Reference & Application (9th Ed.), 2000, p. 3-20 #12;NRC Construction Flicker Effects 1

  17. Predicting Highway Construction Impacts on a

    E-Print Network [OSTI]

    Minnesota, University of

    Predicting Highway Construction Impacts on a Community #12;Making the Best Decisions in the Face 212 &TH 52 Construction Challenges TH 212 &TH 52 Construction Challenges Ü TH 212 Unsuitable Matls Construction Access Environmentally Sensitive Areas Payment Curve Illegal dump sites Noise Mitigation ­ Walls

  18. Physical properties of naked DNA influence nucleosome positioning and correlate with transcription start and termination sites in yeast

    E-Print Network [OSTI]

    Deniz, Özgen; Flores, Oscar; Battistini, Federica; Pérez, Alberto; Soler-López, Montserrat; Orozco, Modesto

    2011-01-01

    with transcription start and termination sites in yeast. BMCtranscription start and termination sites in yeast Özgenand TTS (Transcription Termination Site) (at least in yeast)

  19. Rezac Construction | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onRAPID/Geothermal/Exploration/ColoradoRemsenburg-Speonk, New York: EnergyOpenReykjanes Geothermal PowerRezac Construction

  20. Nuclear power plant construction activity, 1986

    SciTech Connect (OSTI)

    Not Available

    1987-07-24

    Cost estimates, chronological data on construction progress, and the physical characteristics of nuclear units in commercial operation and units in the construction pipeline as of December 31, 1986, are presented. This report, which is updated annually, was prepared to provide an overview of the nuclear power plant construction industry. The report contains information on the status of nuclear generating units, average construction costs and lead-times, and construction milestones for individual reactors.

  1. Audit of construction of protective force training facilities at the Pantex Plant

    SciTech Connect (OSTI)

    1995-05-05

    A goal of the Department of Energy project management system is to ensure that projects are necessary to fulfill mission needs and are cost effective. This requires that the Department justify each project and explore competitive alternatives. The objective of this audit was to assess the need to construct protective force training facilities at the Department`s Pantex Plant. Our audit disclosed that (1) construction of a physical training facility was not necessary to fulfill mission needs, and (2) the Department did not consider all viable alternatives to constructing a weapons tactics and training facility. These conditions occurred, in part, because a Justification for New Start was never prepared and approved for the Security Enhancements Major System Acquisition, which included these two projects. We recommended that the Manager, Albuquerque Operations Office, cancel construction of the physical training facility, make needed repairs and upgrades to the existing facilities, and reduce the cost of the Security Enhancements Major System Acquisition accordingly. Implementation of this recommendation will save about $1.7 million. We also recommended that the Manager direct Mason & Hanger to perform economic analyses of all viable alternatives to constructing a weapons tactics and training facility before proceeding with construction. Such analyses could lead to cancellation or rescoping of the proposed facility and result in savings to the Department. Albuquerque management did not agree to cancel construction of the physical training facility, but did agree to perform economic analyses of all viable alternatives to the proposed weapons tactics and training facility before proceeding with construction.

  2. Hydrodynamic construction of the electromagnetic field

    E-Print Network [OSTI]

    Peter Holland

    2014-10-03

    We present an alternative Eulerian hydrodynamic model for the electromagnetic field in which the discrete vector indices in Maxwell\\s equations are replaced by continuous angular freedoms, and develop the corresponding Lagrangian picture in which the fluid particles have rotational and translational freedoms. This enables us to extend to the electromagnetic field the exact method of state construction proposed previously for spin 0 systems, in which the time-dependent wavefunction is computed from a single-valued continuum of deterministic trajectories where two spacetime points are linked by at most a single orbit. The deduction of Maxwell\\s equations from continuum mechanics is achieved by generalizing the spin 0 theory to a general Riemannian manifold from which the electromagnetic construction is extracted as a special case. In particular, the flat-space Maxwell equations are represented as a curved-space Schr\\"odinger equation for a massive system. The Lorentz covariance of the Eulerian field theory is obtained from the non-covariant Lagrangian-coordinate model as a kind of collective effect. The method makes manifest the electromagnetic analogue of the quantum potential that is tacit in Maxwell\\s equations. This implies a novel definition of the \\classical limit\\ of Maxwell\\s equations that differs from geometrical optics. It is shown that Maxwell\\s equations may be obtained by canonical quantization of the classical model. Using the classical trajectories a novel expression is derived for the propagator of the electromagnetic field in the Eulerian picture. The trajectory and propagator methods of solution are illustrated for the case of a light wave.

  3. Electrochimica Acta 53 (2007) 610621 Non-isothermal cold start of polymer electrolyte fuel cells

    E-Print Network [OSTI]

    2007-01-01

    electrolyte fuel cell (PEFC) engine in a sub-freezing environment, referred to as "cold start", remainsElectrochimica Acta 53 (2007) 610­621 Non-isothermal cold start of polymer electrolyte fuel cells of a polymer electrolyte fuel cell (PEFC) and to delineate intricate interactions between ice formation

  4. Thermodynamic extrapolation and martensite-start temperature of substitutionally alloyed steels

    E-Print Network [OSTI]

    Cambridge, University of

    Thermodynamic extrapolation and martensite-start temperature of substitutionally alloyed steels H appraisethe superelementtechniqueby considering martensitic transformations in low-alloy steels. K. D. H. Bhadeshia +AFt;'{T-l00~ }jATmag,}I +Af* (1) The martensite-start temperature M, of any

  5. IBM XL Fortran Enterprise Edition V10.1 for AIX Getting Started with XL Fortran

    E-Print Network [OSTI]

    Hickman, Mark

    IBM XL Fortran Enterprise Edition V10.1 for AIX Getting Started with XL Fortran SC09-8009-00 #12;#12;IBM XL Fortran Enterprise Edition V10.1 for AIX Getting Started with XL Fortran SC09-8009-00 #12;Note "Notices" on page 37. First Edition (September 2005) This edition applies to IBM® XL Fortran Enterprise

  6. Getting Started 1) Visit the Java VChill website at http://chill.colostate.edu/java/

    E-Print Network [OSTI]

    Rutledge, Steven

    VCHILL Getting Started 1) Visit the Java VChill website at http://chill.colostate.edu/java/ 2) Click on "Launch VChill" (you will see Java start up * ) 3) Enter signon name (password dialog pops up bookmark case * If it does not, you may need to install Java first. Click on the Download Center link (in

  7. (c) 2014 Robert W Heath Jr. WHAT STARTS HERE CHANGES THE WORLD

    E-Print Network [OSTI]

    Heath Jr., - Robert W.

    (c) 2014 Robert W Heath Jr. WHAT STARTS HERE CHANGES THE WORLD Robert W. Heath Jr., Ph.D., P THE WORLD (c) 2014 Robert W Heath Jr. 2 mmWave beamforming mmWave for tactical ad hoc networks mmD students #12;WHAT STARTS HERE CHANGES THE WORLD (c) 2014 Robert W Heath Jr. MIMO precoding Precoding

  8. Quick-Start Operating Guide Document No. 1800-13 Stainless Steel Glove Boxes

    E-Print Network [OSTI]

    Yoo, S. J. Ben

    Quick-Start Operating Guide Document No. 1800-13 Stainless Steel Glove Boxes (Series 300 ­ 600-Start Operating Guide Stainless Steel Glove Boxes (Series 300 ­ 600) © Copyright 2010 Terra Universal Inc. All.0Introduction This manual provides information on installing and operating your Terra Stainless Steel Glove Box

  9. The No-Boundary Probability for the Universe starting at the top of the hill

    E-Print Network [OSTI]

    Tim Clunan

    2007-04-16

    We use the Hartle-Hawking No-Boundary Proposal to make a comparison between the probabilities of the universe starting near, and at, the top of a hill in the effective potential. In the context of top-down cosmology, our calculation finds that the universe doesn't start at the top.

  10. Handbook of energy use for building construction

    SciTech Connect (OSTI)

    Stein, R.G.; Stein, C.; Buckley, M.; Green, M.

    1980-03-01

    The construction industry accounts for over 11.14% of the total energy consumed in the US annually. This represents the equivalent energy value of 1 1/4 billion barrels of oil. Within the construction industry, new building construction accounts for 5.19% of national annual energy consumption. The remaining 5.95% is distributed among new nonbuilding construction (highways, ralroads, dams, bridges, etc.), building maintenance construction, and nonbuilding maintenance construction. The handbook focuses on new building construction; however, some information for the other parts of the construction industry is also included. The handbook provides building designers with information to determine the energy required for buildings construction and evaluates the energy required for alternative materials, assemblies, and methods. The handbook is also applicable to large-scale planning and policy determination in that it provides the means to estimate the energy required to carry out major building programs.

  11. The ground state construction of bilayer graphene

    E-Print Network [OSTI]

    Alessandro Giuliani; Ian Jauslin

    2015-07-31

    We consider a model of half-filled bilayer graphene, in which the three dominant Slonczewski-Weiss-McClure hopping parameters are retained, in the presence of short range interactions. Under a smallness assumption on the interaction strength $U$ as well as on the inter-layer hopping $\\epsilon$, we construct the ground state in the thermodynamic limit, and prove its analyticity in $U$, uniformly in $\\epsilon$. The interacting Fermi surface is degenerate, and consists of eight Fermi points, two of which are protected by symmetries, while the locations of the other six are renormalized by the interaction, and the effective dispersion relation at the Fermi points is conical. The construction reveals the presence of different energy regimes, where the effective behavior of correlation functions changes qualitatively. The analysis of the crossover between regimes plays an important role in the proof of analyticity and in the uniform control of the radius of convergence. The proof is based on a rigorous implementation of fermionic renormalization group methods, including determinant estimates for the renormalized expansion.

  12. The ground state construction of bilayer graphene

    E-Print Network [OSTI]

    Alessandro Giuliani; Ian Jauslin

    2015-07-22

    We consider a model of half-filled bilayer graphene, in which the three dominant Slonczewski-Weiss-McClure hopping parameters are retained, in the presence of short range interactions. Under a smallness assumption on the interaction strength $U$ as well as on the inter-layer hopping $\\epsilon$, we construct the ground state in the thermodynamic limit, and prove its analyticity in $U$, uniformly in $\\epsilon$. The interacting Fermi surface is degenerate, and consists of eight Fermi points, two of which are protected by symmetries, while the locations of the other six are renormalized by the interaction, and the effective dispersion relation at the Fermi points is conical. The construction reveals the presence of different energy regimes, where the effective behavior of correlation functions changes qualitatively. The analysis of the crossover between regimes plays an important role in the proof of analyticity and in the uniform control of the radius of convergence. The proof is based on a rigorous implementation of fermionic renormalization group methods, including determinant estimates for the renormalized expansion.

  13. Construction of file database management

    SciTech Connect (OSTI)

    MERRILL,KYLE J.

    2000-03-01

    This work created a database for tracking data analysis files from multiple lab techniques and equipment stored on a central file server. Experimental details appropriate for each file type are pulled from the file header and stored in a searchable database. The database also stores specific location and self-directory structure for each data file. Queries can be run on the database according to file type, sample type or other experimental parameters. The database was constructed in Microsoft Access and Visual Basic was used for extraction of information from the file header.

  14. Martifer Construction | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OFAMERICA'SHeavyAgency (IRENA) JumpLiterature ReviewMaka WindkraftConstruction

  15. Cold-Start Emissions Control in Hybrid Vehicles Equipped with a Passive Hydrocarbon and NOx Adsorber

    SciTech Connect (OSTI)

    Gao, Zhiming; Kim, Miyoung; Choi, Jae-Soon; Daw, C Stuart; Parks, II, James E; Smith, David E

    2012-01-01

    We presents a study of the potential for using low-cost sorbent materials (i.e. Ag-Beta-zeolite and Fe-Mn-Zr transition metal oxides) to temporally trap hydrocarbons (HCs) and nitrogen oxides (NOx) emissions during cold-start periods in HEVs and PHEVs over transient driving cycles. The adsorption behavior of the candidate sorbent materials was characterized in our laboratory flow reactor experiments. The parameters were then used to develop a one-dimensional, transient device model which has been implemented in the Powertrain Systems Analysis Toolkit (PSAT) to simulate a passive HC and NOx absorber device. The results show that such an absorber can substantially reduce HC and NOx emissions by storing them when the 3-way catalyst is too cool to function and re-releasing them when the exhaust temperature rises. These improved emission controls do not involve any penalty in fuel consumption or require any change in engine operation. The cost of these sorbent materials is also much less than conventional 3-way catalysts.

  16. The new Kaiserstuhl coking plant: The heating system -- Design, construction and initial operating experience

    SciTech Connect (OSTI)

    Strunk, J.

    1996-12-31

    At the end of 1992 the new coke plant Kaiserstuhl in Dortmund/Germany with presently the largest coke ovens world-wide started its production operation in close linkage to the Krupp-Hoesch Metallurgical Works after about 35 months construction time. This plant incorporating comprehensive equipment geared to improve environmental protection is also considered as the most modern coke plant of the world. The heating-system and first results of operation will be presented.

  17. Scenario Reduction and Scenario Tree Construction for Power Management Problems

    E-Print Network [OSTI]

    Römisch, Werner

    1 Scenario Reduction and Scenario Tree Construction for Power Management Problems Nicole Gr¨owe-Kuska, Holger Heitsch and Werner R¨omisch Abstract-- Portfolio and risk management problems of power utilities and corresponding probabilities to model the multivariate random data process (electrical load, stream flows

  18. CONSTRUCTING SECURE CONTENT-DEPENDENT WATERMARKING SCHEME USING HOMOMORPHIC ENCRYPTION

    E-Print Network [OSTI]

    Sun, Qibin

    CONSTRUCTING SECURE CONTENT-DEPENDENT WATERMARKING SCHEME USING HOMOMORPHIC ENCRYPTION Zhi Li.a-star.edu.sg ABSTRACT Content-dependent watermarking (CDWM) has been pro- posed as a solution to overcome the potential and cryptography. 1. INTRODUCTION Consider a simplified model of Spread-Spectrum (SS) water- marking. Let x

  19. The Relation between Lean Construction and Performance in the Korean Construction Industry

    E-Print Network [OSTI]

    Cho, Seongkyun

    2011-01-01

    satisfaction with the construction process. 1.Degree ofOften. Process improvement in construction 1. 50-75% of theto Lead time in Construction Supply Chains: Case of Pipe

  20. Construction design as a process for flow : applying lean principles to construction design

    E-Print Network [OSTI]

    Soto, Leticia, S.M. Massachusetts Institute of Technology

    2007-01-01

    Delays and cost overruns are the rule rather than the exception in the construction industry. Design changes due to lack of constructability late in the construction phase generating costly ripple effect which create delay ...

  1. Sustainable Construction Materials Objective: Conduct comprehensive research into sustainable construction materials,

    E-Print Network [OSTI]

    Wolberg, George

    of these novel materials. Suggested Approaches: Research typical compositions of construction waste streams (with accompanying presentation) summarizing the construction waste stream, opportunities for alternateSustainable Construction Materials Objective: Conduct comprehensive research into sustainable

  2. Modeling uncertainty in the New York City no. 7 subway line extension project using Decision Aids for Tunnelling (DAT)

    E-Print Network [OSTI]

    Hung, Vinnie

    2012-01-01

    Given the frequent cost overruns and schedule delays associated with underground construction projects, it is imperative that a detailed estimate of both be developed and considered prior to starting construction. The ...

  3. Department of Manufacturing & Construction Engineering Technology (MCET)

    E-Print Network [OSTI]

    Hamburger, Peter

    Department of Manufacturing & Construction Engineering Technology (MCET) Position title professional/industrial experience and teaching experience are desired. Additional expectations include, and community is also required. Description of the department: The Department of Manufacturing & Construction

  4. Onsite Wastewater Treatment Systems: Constructed Wetlands 

    E-Print Network [OSTI]

    Lesikar, Bruce J.

    2008-10-23

    A constructed wetland system for domestic wastewater treatment is designed to mimic the natural wetland treatment process of Mother Nature. This publication explains the treatment, design, operation and maintenance of constructed wetlands....

  5. Sustainable construction in Mexican housing markets

    E-Print Network [OSTI]

    Jung, Bomee

    2007-01-01

    This thesis examines recent developments in Mexico's housing markets as an example of how sustainable construction is being adapted and applied in developing countries. The recognition that the construction, operation, and ...

  6. Pseudo one-dimensional analysis of polymer electrolyte fuel cell cold-start

    SciTech Connect (OSTI)

    Mukherjee, Partha P [Los Alamos National Laboratory; Mukundan, Rangachary [Los Alamos National Laboratory; Borup, Rodney L [Los Alamos National Laboratory; Wang, Yun [NON LANL; Mishlera, Jeff [NON LANL

    2009-01-01

    This paper investigates the electrochemical kinetics, oxygen transport, and solid water formation in polymer electrolyte fuel cell (PEFC) during cold start. Following [Yo Wang, J. Electrochem. Soc., 154 (2007) B1041-B1048], we develop a pseudo one-dimensional analysis, which enables the evaluation of the impact of ice volume fraction and temperature variations on cell performance during cold-start. The oxygen profile, starvation ice volume fraction, and relevant overpotentials are obtained. This study is valuable for studying the characteristics of PEFC cold-start.

  7. Nuclear Power Plant Construction Activity, 1985

    SciTech Connect (OSTI)

    Not Available

    1986-08-13

    Nuclear Power Plant Construction Activity 1985 presents cost estimates, chronological data on construction progress, and the physical characteristics of nuclear units in commercial operation and units in the construction pipeline as of December 31, 1985. This Report, which is updated annually, was prepared to respond to the numerous requests received by the Energy Information Administration for the data collected on Form EIA-254, ''Semiannual Report on Status of Reactor Construction.''

  8. Constructing a Cleaner Economy Info Graphic

    Broader source: Energy.gov [DOE]

    An overview of the impact that the clean energy economy is having on the U.S. construction industry.

  9. Start End

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fabricated coupler subjected to 190 KW for 0.5 sec without breakdown with taper or transformer at input. Four-Way Splitter with Correction Phasors Transformer launch...

  10. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you not findGeoscience/Environment Geoscience/Environment GeothermalGet

  11. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePage UnknownChadGetBusiness

  12. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities NuclearlongGeneralGeorgePage

  13. Hybrid: Starting

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageBlenderBusiness Case forbutton highlighted Braking

  14. CONSTRUCTION ALERT Additional Notice to Ongoing Project

    E-Print Network [OSTI]

    CONSTRUCTION ALERT Additional Notice to Ongoing Project TO: Deans, Directors, Chairpersons: November 28 to December 1, 2011 HOURS OF CONSTRUCTION: 6:30 a.m. to 9:30 a.m. ACCESSIBLE ROUTES: No accessible routes will be affected. ADVISORY: All persons in the vicinity of this construction project

  15. National Construction Safety Teams Annual Report

    E-Print Network [OSTI]

    Magee, Joseph W.

    National Construction Safety Teams Annual Report Fiscal Year 2006 Introduction In October 2002, the President signed into law the National Construction Safety Team (NCST) Act (P.L. 107-231), which authorized the Director of the National Institute of Standards and Technology (NIST) to establish National Construction

  16. INVESTIGATION Construction of Reference Chromosome-Scale

    E-Print Network [OSTI]

    Douches, David S.

    INVESTIGATION Construction of Reference Chromosome-Scale Pseudomolecules for Potato: Integrating was genotyped with several types of molecular genetic markers to construct a new ~936 cM linkage map comprising and orientation within the pseudo- molecules are closely collinear with independently constructed high density

  17. National Construction Safety Team Act Annual Report

    E-Print Network [OSTI]

    Magee, Joseph W.

    National Construction Safety Team Act Annual Report Fiscal Year 2008 Summary This annual report to Congress for FY 2008 is required by the National Construction Safety Team Act. NIST completed its federal report. The ICC Codes are widely adopted and used as the basis for state and local construction codes

  18. CONSTRUCTION INTERNATIONALE ET RESPONSABILIT CIVILE DU CONSTRUCTEUR

    E-Print Network [OSTI]

    Spino, Claude

    CONSTRUCTION INTERNATIONALE ET RESPONSABILITÉ CIVILE DU CONSTRUCTEUR: LES PERSPECTIVES EN DROIT contrat international de construction, jusqu'à présent négligée en droit international privé québécois, en construction vis-à-vis du maître d'ouvrage et, accessoirement, dupoint de vue des rapports entre ces deux

  19. Enantioselective Construction of Cyclic Quaternary Centers: (-)-Mesembrine

    E-Print Network [OSTI]

    Taber, Douglass

    Enantioselective Construction of Cyclic Quaternary Centers: (-)-Mesembrine Douglass F. Taber, (-)-mesembrine 1. Amide 2 should be a useful chiron for the enantioselective construction of cyclic quaternary of mesembrine2,3 and its analogues is the enantioselective construction of the chiral quaternary center.4 We

  20. Clemson University Construction Science and Management BS

    E-Print Network [OSTI]

    Bolding, M. Chad

    Clemson University Construction Science and Management BS 2011 ­ 2012 Outcome Assessment Plan Mission / Purpose - The mission of the Department of Construction Science and Management undergraduate of improving the quality of the construction industry and thus the built environment. Goals G 1: Accreditation

  1. National Construction Safety Team Act Annual Report

    E-Print Network [OSTI]

    Magee, Joseph W.

    National Construction Safety Team Act Annual Report Fiscal Year 2007 Introduction In October 2002, the President signed into law the National Construction Safety Team (NCST) Act (P.L. 107 National Construction Safety Teams for deployment after events causing the failure of a building

  2. Method of constructing an improved electrochemical cell

    DOE Patents [OSTI]

    Grimes, Patrick G. (Westfield, NJ); Einstein, Harry (Springfield, NJ)

    1984-10-09

    An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

  3. SECTION GS1020 CONSTRUCTION CODE REQUIREMENTS

    E-Print Network [OSTI]

    Zhang, Yuanlin

    101, Life Safety Code; 5. National Fire Protection Association Codes and Standards; 6. ANSI/ASME A17SECTION GS1020 ­ CONSTRUCTION CODE REQUIREMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings includes the following: 1. Construction code requirements for all construction at Texas Tech University. 1

  4. Automatic Thesaurus Construction for Cross Generation Corpus

    E-Print Network [OSTI]

    Ido, Dagan

    4 Automatic Thesaurus Construction for Cross Generation Corpus HADAS ZOHAR, CHAYA LIEBESKIND for semiautomatic thesaurus construction, for a cross generation, cross genre, and cross cultural corpus. Semiautomatic thesaurus construction is a complex task, and applying it on a cross generation corpus brings its

  5. Evaluation of the Start-Up Core Physics Tests at Japan's High Temperature Engineering Test Reactor (Annular Core Loadings)

    SciTech Connect (OSTI)

    John D. Bess; Nozomu Fujimoto; James W. Sterbentz; Luka Snoj; Atsushi Zukeran

    2010-03-01

    The High Temperature Engineering Test Reactor (HTTR) of the Japan Atomic Energy Agency (JAEA) is a 30 MWth, graphite-moderated, helium-cooled reactor that was constructed with the objectives to establish and upgrade the technological basis for advanced high-temperature gas-cooled reactors (HTGRs) as well as to conduct various irradiation tests for innovative high-temperature research. The core size of the HTTR represents about one-half of that of future HTGRs, and the high excess reactivity of the HTTR, necessary for compensation of temperature, xenon, and burnup effects during power operations, is similar to that of future HTGRs. During the start-up core physics tests of the HTTR, various annular cores were formed to provide experimental data for verification of design codes for future HTGRs. The Japanese government approved construction of the HTTR in the 1989 fiscal year budget; construction began at the Oarai Research and Development Center in March 1991 and was completed May 1996. Fuel loading began July 1, 1998, from the core periphery. The first criticality was attained with an annular core on November 10, 1998 at 14:18, followed by a series of start-up core physics tests until a fully-loaded core was developed on December 16, 1998. Criticality tests were carried out into January 1999. The first full power operation with an average core outlet temperature of 850ºC was completed on December 7, 2001, and operational licensing of the HTTR was approved on March 6, 2002. The HTTR attained high temperature operation at 950 ºC in April 19, 2004. After a series of safety demonstration tests, it will be used as the heat source in a hydrogen production system by 2015. Hot zero-power critical, rise-to-power, irradiation, and safety demonstration testing , have also been performed with the HTTR, representing additional means for computational validation efforts. Power tests were performed in steps from 0 to 30 MW, with various tests performed at each step to confirm core characteristics, thermal-hydraulic properties, and radiation shielding. The high-temperature test operation at 950 ºC represented the fifth and final phase of the rise-to-power tests. The safety tests demonstrated inherent safety features of the HTTR such as slow temperature response during abnormal events due to the large heat capacity of the core and the negative reactivity feedback. The experimental benchmark performed and currently evaluated in this report pertains to the data available for the annular core criticals from the initial six isothermal, annular and fully-loaded, core critical measurements performed at the HTTR. Evaluation of the start-up core physics tests specific to the fully-loaded core is compiled elsewhere (HTTR-GCR-RESR-001).

  6. Media Summary 04 17 April Bristol Post Construction work to start on UWE Bristol 50 million Faculty of Business and Law

    E-Print Network [OSTI]

    Aickelin, Uwe

    was interviewed by Made in Bristol TV about the recent air pollution across England. Dr Lisa Harrison is providing and Control Today - Ashtead Technology helps Bristol schoolchildren monitor local air quality Insider Media around the world. Professor Alan Winfield was interviewed for a Channel 4 documentary aired recently

  7. Angular momentum in turns and abrupt starts : strategies for bipedal balance control

    E-Print Network [OSTI]

    Farrell, Matthew Todd

    2009-01-01

    Transients occur in human walking during a transition to, from, and between steady state walking and act as an impulse destabilizing an otherwise normal gait cycle. Turns and accelerated starts are all common transients ...

  8. 1. The derivative of y = mm“ at x = 2. A bacteria culture starts with ...

    E-Print Network [OSTI]

    The derivative of y = mm“ at x = 2. A bacteria culture starts with 200 bacteria and grows at a rate proportional to its size. After 2 hours there were 400 bacteria.

  9. Vehicle Technologies Office Merit Review 2015: A 12V Start-Stop Li Polymer Battery Pack

    Broader source: Energy.gov [DOE]

    Presentation given by LG Chem Power at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about A 12V start-stop Li polymer...

  10. Supporting Information All analytical expressions were obtained starting from Equation 3, the tQSSA approximation

    E-Print Network [OSTI]

    Mirny, Leonid

    information. All numerical analysis was done in Matlab, starting from the full MAK description of the cycle equations for the given inputs using the ODE23s Matlab function. Finally, the data in Figure 6 was obtained

  11. Influence of RNA Polymerase II Catalytic Activity on Transcription Start Site Selection 

    E-Print Network [OSTI]

    Jin, Huiyan

    2015-08-01

    catalytic activity influences the first step of gene expression, transcription initiation, in Saccharomyces cerevisiae. My dissertation focuses on the mechanisms by which Pol II activity defects contribute to transcription start site (TSS) selection...

  12. The Health Component of Head Start: Potential Impacts on Childhood Obesity, Immunizations, and Dental Health 

    E-Print Network [OSTI]

    Banda, Tanya Y.

    2010-01-14

    Head Start, an early intervention program administered by the Administration for Children and Families of the Department of Health and Human Services, offers children of low-income families comprehensive services in an ...

  13. Growth strategies : how software start-ups can leverage alliances, acquisitions, IPOs and venture capital

    E-Print Network [OSTI]

    Ybanez, Sergio D

    2007-01-01

    The identification of the different factors impacting a software start-up company's decision to pursue an alliance, acquisition, IPO or venture capital to sustain growth is the main objective of this research study. First ...

  14. Effects of secondary air injection during cold start of SI engines

    E-Print Network [OSTI]

    Lee, Dongkun

    2010-01-01

    The paucity of exhaust oxygen during cold start of automobile SI engines limits the extent of exothermic chemical reactions in the exhaust port, manifold, and catalyst. The injection of air into the exhaust system therefore ...

  15. START Program for Renewable Energy Project Development Assistance Non-Disclosure Agreement

    Broader source: Energy.gov [DOE]

    Download the Non-Disclosure Agreement to submit along with your application for the DOE Office of Indian Energy Strategic Technical Assistance Response Team (START) Program for Renewable Energy...

  16. Optimizing a start-stop system to minimize fuel consumption using machine learning

    E-Print Network [OSTI]

    Hollingsworth, Noel

    2014-01-01

    Many people are working on improving the efficiency of car's engines. One approach to maximizing efficiency has been to create start-stop systems. These systems shut the car's engine off when the car comes to a stop, saving ...

  17. STC.UNM: THE IMPACT OF START-UP COMPANIES ON THE

    E-Print Network [OSTI]

    New Mexico, University of

    and facilitating the creation of start-up companies, and is a vital tool in the economic development of a high-tech and an effective conduit not only for UNM research but also UNM graduates who want to enter high-tech fields://stc.unm.edu/about/metrics.php). This analysis updates the previous studies and emphasizes the impact of high-tech start-up companies that have

  18. Method and apparatus for rapid stopping and starting of a thermoacoustic engine

    SciTech Connect (OSTI)

    Swift, Gregory W.; Backhaus, Scott N.; Gardner, David L.

    2003-11-11

    A thermoacoustic engine-driven system with a hot heat exchanger, a regenerator or stack, and an ambient heat exchanger includes a side branch load for rapid stopping and starting, the side branch load being attached to a location in the thermoacoustic system having a nonzero oscillating pressure and comprising a valve, a flow resistor, and a tank connected in series. The system is rapidly stopped simply by opening the valve and rapidly started by closing the valve.

  19. Imagine Homes New Construction Occupied Test House

    SciTech Connect (OSTI)

    Stecher, D.; Rapport, A.; Allison, K.

    2013-07-01

    This report summarizes the research findings of a long-term monitoring plan to evaluate the performance of an energy-efficient home constructed in 2010 in San Antonio, Texas. Monitoring of the energy use, energy generation, and temperature conditions for this project occurred between July 2010 and October 2011. The heating, ventilation, and air conditioning system effectively maintained acceptable temperatures and humidity levels in peak cooling and heating and non-peak operating periods. Discrepancies were found between modeled and actual energy use values, with actual space cooling energy use closest to the corresponding modeled value. Energy consumption predicted for lighting, appliances, and miscellaneous electrical loads was significantly higher than measured amounts, and energy consumption predicted for cooling was significantly lower than measured amounts. A high amount of the 1,600 kWh of PV-generated electricity produced annually was sent to the electric grid every month. The solar thermal DHW system was the main source of hot water for most of the year and performed well; during summer, electrical use by the backup system was rare.

  20. Construction and AvailabilityConstruction and Availability Uncertainty in the RegionalUncertainty in the Regional

    E-Print Network [OSTI]

    Page 1 Construction and AvailabilityConstruction and Availability Uncertainty in the Regional and Technology Availability Construction Costs Economic Retirement Variable Capacity for Existing Units #12;Page to construction power plants or to take other action May include policies for particular resources "Scenario

  1. Cosmic Logic: a Computational Model

    E-Print Network [OSTI]

    Vanchurin, Vitaly

    2015-01-01

    We describe a simple computational model of cosmic logic suitable for analysis of, for example, discretized cosmological systems. The construction is based on a particular model of computation, developed by Alan Turing, with cosmic observers (CO), cosmic measures (CM) and cosmic symmetries (CS) described by Turing machines. CO machines always start with a blank tape and CM machines take CO's Turing number (also known as description number or G{\\" o}del number) as input and output the corresponding probability. Similarly, CS machines take CO's Turing number as input, but output either one if the CO machines are in the same equivalence class or zero otherwise. We argue that CS machines are more fundamental than CM machines and, thus, should be used as building blocks in constructing CM machines. We prove the non-computability of a CS machine which discriminates between two classes of CO machines: mortal that halts in finite time and immortal that runs forever. In context of eternal inflation this result implies...

  2. Status of NIO1 construction

    SciTech Connect (OSTI)

    Cavenago, M.; Fagotti, E.; Poggi, M. [INFN-LNL, v.le dell'Universita' 2, 35020 Legnaro (PD) (Italy); Serianni, G.; Antoni, V.; Bigi, M.; Fellin, F.; Gazza, E.; Recchia, M.; Veltri, P. [Consorzio RFX, Associazione Euratom-ENEA sulla fusione, c.so S. Uniti 4, 35127 Padova (Italy); Petrenko, S.; Kulevoy, T. [INFN-LNL, Legnaro, Italy and ITEP, B. Cheremushkinskaya 25, 117218 Moscow (Russian Federation)

    2011-09-26

    The NIO1 (Negative Ion Optimization phase 1) project consists of a multiaperture negative ion source mounted on a 60 kV accelerating column; up to 9 beamlets (15 mA H{sup -} each one) arranged in 3x3 matrix with 14 mm spacing can be extracted. The moderate size and the modular concept make some relative rotation of the source magnetic filter and the electrodes possible, so that the effect of crossed and aligned field can be easily compared. Other goals of source experimental program are emittance (and beam profile) measurement at several distances (for simulation code validation), testing of diagnostic components and of radiofrequency coupling. A full set of construction drawing was completed; also the Fast Emittance Scanner (FES) and its vacuum chambers were built (four mounting positions are reserved to FES). Some low power rf matching boxes were developed for a test plasma, approximately half the source size. A cesium oven compatible with NIO1 is being also developed; by using some industrial standard 100 W heaters (with a proper driver) a careful control of temperature is planned.

  3. K:\\Web\\WebMirror2\\ospa\\policiesandprocedures\\Allowability of B I start up costs Policy-1-12.doc SPA Procedure for Allowable B&I Clinical Trial Start-Up Costs

    E-Print Network [OSTI]

    Thomas, David D.

    K:\\Web\\WebMirror2\\ospa\\policiesandprocedures\\Allowability of B I start up costs Policy-1-12.doc SPA Procedure for Allowable B&I Clinical Trial Start-Up Costs This internal procedure is intended to resolve issues relating to Business and Industry (B&I)-sponsored clinical trials that have start-up costs

  4. Construction of an embankment with a fly and bottom ash mixture: field performance study

    SciTech Connect (OSTI)

    Yoon, S.; Balunaini, U.; Yildirim, I.Z.; Prezzi, M.; Siddiki, N.Z.

    2009-06-15

    Fly ash and bottom ash are coal combustion by-products (CCBPs) that are generated in large quantities throughout the world. It is often economical to dispose ash as mixtures rather than separately; that notwithstanding, only a few studies have been performed to investigate the behavior of fly and bottom ash mixtures, particularly those with high contents of fly ash. Also, there is very limited data available in the literature on the field performance of structures constructed using ash mixtures. This paper describes the construction and the instrumentation of a demonstration embankment built with an ash mixture (60:40 by weight of fly ash:bottom ash) on State Road 641, Terre Haute, Ind. Monitoring of the demonstration embankment was conducted for a period of 1 year from the start of construction of the embankment. The settlement of the embankment stabilized approximately 5 months after the end of its construction. According to horizontal inclinometer readings, the differential settlement at the top of the embankment is about 5 mm. Results from field quality control tests performed during construction of the demonstration embankment and monitoring data from vertical and horizontal inclinometers and settlement plates indicate that the ash mixture investigated can be considered an acceptable embankment construction material.

  5. National Ignition Facility wet weather construction plan

    SciTech Connect (OSTI)

    Kugler, A N

    1998-01-01

    This report presents a wet weather construction plan for the National Ignition Facility (NIF) construction project. Construction of the NIF commenced in mid- 1997, and excavation of the site was completed in the fall. Preparations for placing concrete foundations began in the fall, and above normal rainfall is expected over the tinter. Heavy rainfall in late November impacted foundation construction, and a wet weather construction plan was determined to be needed. This wet weather constiction plan recommends a strategy, techniques and management practices to prepare and protect the site corn wet weather effects and allow construction work to proceed. It is intended that information in this plan be incorporated in the Stormwater Pollution Prevention Plan (SWPPP) as warranted.

  6. Construction and Control of Genetic Regulatory Networks: A Multivariate Markov Chain Approach

    E-Print Network [OSTI]

    Chan, Raymond

    such as neural networks, linear model, Bayesian networks, non-linear ordinary differential equations, Petri netsConstruction and Control of Genetic Regulatory Networks: A Multivariate Markov Chain Approach Shu In the post-genomic era, the construction and control of genetic regulatory networks using gene expression

  7. Conservative and reactive solute transport in constructed wetlands Steffanie H. Keefe,1

    E-Print Network [OSTI]

    Ryan, Joe

    ] Constructed wetlands are increasingly being used to provide supplemental treatment of wastewater treatment wastewater-dependent wetlands near Phoenix, Arizona, using a solute transport model with transient storage in constructed wetlands. Solutes are transported through primary flow conveying pathways in the main channel

  8. W3 Constructions on Affine Lie Algebras

    E-Print Network [OSTI]

    A. Deckmyn; S. Schrans

    1991-09-16

    We use an argument of Romans showing that every Virasoro construction leads to realizations of $W_3$, to construct $W_3$ realizations on arbitrary affine Lie algebras. Solutions are presented for generic values of the level as well as for specific values of the level but with arbitrary parameters. We give a detailed discussion of the $\\aff{su}(2)_\\ell$-case. Finally, we discuss possible applications of these realizations to the construction of $W$-strings.

  9. Collecting Construction Equipment Activity Data from Caltrans Project Records

    E-Print Network [OSTI]

    Kable, Justin M

    2008-01-01

    Niemeier, D. , (2002). Construction Emissions Review Memo.Documents/June_2002_TO8_construction_memo_for_mjb.pdf Pope,s Fleet Remains Strong. Construction Equipment Magazine,

  10. What Explains Manhattan's Declining Share of Residential Construction?

    E-Print Network [OSTI]

    DAVIDOFF, THOMAS

    2007-01-01

    Share of Residential Construction? Thomas Davido? ? June 20,market. Residential construction in Manhattan has fallento total US residential construction over the last 45 years.

  11. Evaluating a Telenovela: The Safety of Latino Construction Workers

    E-Print Network [OSTI]

    Castaneda, Diego Emiliano

    2011-01-01

    associated with nonfatal construction falls. AmericanBass. The Center for Construction Research and Training. (2007). The Construction Chart Book-Section 15. Fourth.

  12. Grammar in Metaphor: A Construction Grammar Account of Metaphoric Language

    E-Print Network [OSTI]

    Sullivan, Karen

    2007-01-01

    Chang 2004. “Embodied Construction Grammar in Simulation-Mirjam Fried (eds. ), Construction Grammar(s): Cognitive andin Grammar: Conditional Constructions. Cambridge: Cambridge

  13. Improving Construction Workflow- The Role of Production Planning and Control

    E-Print Network [OSTI]

    Hamzeh, Farook

    2009-01-01

    Intl. Group for Lean Construction, Taipei, Taiwan. Ballard,2 nd Edition, Lean Construction Institute, San Francisco,Implementing Lean Construction: Stabilizing Workflow”,

  14. 1999 Commercial Building Characteristics--Year Constructed Comparison

    U.S. Energy Information Administration (EIA) Indexed Site

    Year Constructed Comparison Percentage of Floorspace and Buildings by Year Constructed, 1999 Percentage of Floorspace and Buildings by Year Constructed, 1999. If having trouble...

  15. Roseville Electric- Residential New Construction Rebate Program

    Broader source: Energy.gov [DOE]

    Roseville Electric provides financial incentives to encourage local builders to construct energy efficient homes which incorporate  photovoltaics (PV). Participating builders can choose from three...

  16. CONSTRUCTION OF COVARIANCE MATRICES WITH A ...

    E-Print Network [OSTI]

    2009-05-28

    corresponding minimizer of the discrepancy function has a specified value. Often construction of such matrices is a first step in Monte Carlo studies of statistical ...

  17. Energy Efficient Affordable Housing Construction Program

    Broader source: Energy.gov [DOE]

    The Department of Commerce and Economic Opportunity (DCEO) provides grants through the Energy Efficient Affordable Housing Construction Program. Under this program, grants are provided to Illinois...

  18. Wastewater Construction and Operation Permits (Iowa)

    Broader source: Energy.gov [DOE]

    These regulations describe permit requirements for the construction and operation of facilities treating wastewater, and provide separation distances from other water sources.

  19. Suffolk County- LEED Program for County Construction

    Broader source: Energy.gov [DOE]

    In 2006, the Suffolk County Legislature enacted Resolution No. 126-2006, creating the Leadership in Energy and Environment Design (LEED) Program for county construction projects. The program...

  20. Example Cost Codes for Construction Projects

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    This chapter provides an example outline of cost items and their corresponding cost codes that may be used for construction projects.

  1. Catawba County- Green Construction Permitting Incentive Program

    Broader source: Energy.gov [DOE]

    Catawba County is providing incentives to encourage the construction of sustainably built homes and commercial buildings. Rebates on permit fees and plan reviews are available for certain...

  2. Passive Constructions in Kwak'wala

    E-Print Network [OSTI]

    Rosenblum, Daisy

    2013-01-01

    Publications, Oosterhout, NB. ) Passive Constructions in K !Bernard. 2007. “What is a Passive? ” Studies in Voice andClauses in Bella Coola: Passive vs. Inverse. Voice and

  3. Austin Energy- Commercial New Construction Efficiency Rebates

    Broader source: Energy.gov [DOE]

    Austin Energy offers incentives for the construction and major renovation of commercial buildings within its service territory. The program rewards customers by using a tiered payment format, which...

  4. Construction Consultants, L.I., Inc.

    Broader source: Energy.gov (indexed) [DOE]

    Enterprise Assessments' Office of Enforcement has completed an investigation into an electrical shock incident involving a worker employed by a subcontractor to Construction...

  5. Colorado Air Pollution Control Division - Construction Permits...

    Open Energy Info (EERE)

    Colorado Air Pollution Control Division - Construction Permits Forms and Air Pollutant Emission Notices (APENs) Jump to: navigation, search OpenEI Reference LibraryAdd to library...

  6. Washington Environmental Permit Handbook - NPDES Construction...

    Open Energy Info (EERE)

    Washington Environmental Permit Handbook - NPDES Construction Stormwater General Permit Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory...

  7. Labor Standards for Construction | Department of Energy

    Energy Savers [EERE]

    for Construction More Documents & Publications Chapter 23 - Environment, Energy and Water Efficiency, Renewable Energy Technologies, Occupational Safety, and Drug-free Workplace....

  8. Computer Automated Start-Up and Shutdown of an Air Separation Plant 

    E-Print Network [OSTI]

    Russek, S. L.; Beckowski, T. M.; Vinson, D. R.

    1985-01-01

    halted. The expanders are shutdown. The a1r 1s removed from the plant. and the alr compressor ls shutdown. The ma1n heat exchangers are blocked 1n and are then vented at the cold end. By vent1ng the cold gas at the cold end, the warm end w111 rema1n... and rellab1l1ty. II Incorporate a "Best Operator" ph110sophy. II Mlnlmlze unproductlve power. II Be easy to learn. II Be easy to use. II Allow one operator to start-up and shutdown the plant. PROCESS DESCRIPTION The computer start-up and shutdown...

  9. Civil n Construction n Architectural n Environmental Department of Civil, Construction, and Environmental Engineering Rev: February 22, 2014

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    and Sophomore Years (credit hours) Semester Civil Engineering Construction EngineeringCivil n Construction n Architectural n Environmental Department of Civil, Construction

  10. Post-project appraisals of constructed vernal pools in Solano County, California

    E-Print Network [OSTI]

    Baraona, Maya; Ippolito, Teresa; Renz, Wendy

    2007-01-01

    listed plant taxa of vernal pool associations in California.California's Ephemeral Vernal Pools May Be a Good Model forDe Weese, J . M . 1998. Vernal Pool Construction Monitoring

  11. Construction of problemsolving methods as parametric design

    E-Print Network [OSTI]

    ten Teije, Annette

    Construction of problem­solving methods as parametric design A. ten Teije 1 , F. van Harmelen 2 , A of the functionality of problem solving methods that allows us to view the construction of problem solvers for parametric design, we use propose­critique­modify for the automated configuration of problem solving methods

  12. Decentralized Control of Construction Behavior in Paper

    E-Print Network [OSTI]

    Karsai, Istvan

    through the common medium of the environment of the colony. 1 Introduction Most man-made systems are basedDecentralized Control of Construction Behavior in Paper Wasps: An Overview of the Stigmergy, construction behavior, so- cial wasps In order to understand complex systems, it is necessary to study

  13. The Syntax of the Ba-Constructions

    E-Print Network [OSTI]

    Yan, Ling

    2004-01-01

    The Ba-construction has been widely discussed in the literature; however, few satisfactory studies have been carried out on the Ba-construction from a syntactic approach. In this paper 1 will argue for the fact that the Ba predicate describes a...

  14. Construction of Higher Order Finite Element with

    E-Print Network [OSTI]

    Kern, Michel

    ' & $ % Construction of Higher Order Finite Element with Mass Lumping Using Computer Algebra. (3D, combinatorial analysis, new third order element) 2 #12; ' & $ % Guidelines for the construction of nodes must be ~ P k unisolvent. 2. Finite element must be continuous. 3. Quadrature formula must satisfy

  15. Local Constructive Set Theory and Inductive Definitions

    E-Print Network [OSTI]

    Aczel, Peter

    Local Constructive Set Theory and Inductive Definitions Peter Aczel 1 Introduction Local Constructive Set Theory (LCST) is intended to be a local version of con- structive set theory (CST principles, is also acceptable in topos mathematics, the mathematics that can be carried out in an arbi

  16. CALIFORNIA INSTITUTE OF TECHNOLOGY CAPITAL CONSTRUCTION POLICY

    E-Print Network [OSTI]

    Goddard III, William A.

    CALIFORNIA INSTITUTE OF TECHNOLOGY CAPITAL CONSTRUCTION POLICY 12/3/03 Page 1 of 5 SUMMARY guidelines related to the funding and the estimating of costs. It also formalizes the review and approval construction project or major renovation with a project cost estimated to be $3 million or greater should

  17. A Generalized Construction of Mirror Manifolds

    E-Print Network [OSTI]

    P. Berglund; T. Hübsch

    1992-01-09

    We generalize the known method for explicit construction of mirror pairs of $(2,2)$-superconformal field theories, using the formalism of Landau-Ginzburg orbifolds. Geometrically, these theories are realized as Calabi-Yau hypersurfaces in weighted projective spaces. This generalization makes it possible to construct the mirror partners of many manifolds for which the mirror was not previously known.

  18. Qualification of concrete mixtures for fast track construction applications 

    E-Print Network [OSTI]

    Secmen, Serhan

    1997-01-01

    Fast track construction is a special type of construction where construction methods and activities are planned to minimize the construction duration. Since the duration of the hardening period of concrete is largely undefined at the time...

  19. Moratorium on Construction of Nuclear Power Facilities (Connecticut...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Moratorium on Construction of Nuclear Power Facilities (Connecticut) Moratorium on Construction of Nuclear Power Facilities (Connecticut) < Back Eligibility Agricultural Commercial...

  20. Constructing a Weyl semimetal by stacking one dimensional topological phases

    E-Print Network [OSTI]

    Sriram Ganeshan; S. Das Sarma

    2015-04-02

    Topological semimetals in three-dimensions (e.g. Weyl semimetal) can be built by stacking two dimensional topological phases. The interesting aspect of such a construction is that even though the topological building blocks in the low dimension may be gapped, the higher dimensional semimetallic phase emerges as a gapless critical point of a topological phase transition between two distinct insulating phases. In this work, we extend this idea by constructing three-dimensional topological semimetallic phases akin to Weyl systems by stacking one-dimensional Aubry-Andre-Harper (AAH) lattice tight binding models with non-trivial topology. The generalized AAH model is a family of one dimensional tight binding models with cosine modulations in both hopping and onsite energy terms. In this paper, we present a two-parameter generalization of the AAH model that can access topological phases in three dimensions within a unified framework. We show that the $\\pi$-flux state of this two-parameter AAH model manifests three dimensional topological semimetallic phases where the topological features are embedded in one dimension. The topological nature of the band touching points of the semimetallic phase in 3D is explicitly established both analytically and numerically from the 1D perspective. This dimensional reduction provides a simple protocol to experimentally construct the three dimensional Brillouin zone of the topological semimetallic phases using `legos' of simple 1D double well optical lattices. We also propose Zak phase imaging of optical lattices as a tool to capture the topological nature of the band touching points. Our work provides a theoretical connection between the commensurate AAH model in 1D and Weyl semimetals in 3D, and points toward practical methods for the laboratory realization of such three dimensional topological systems in atomic optical lattices.

  1. New Faculty Getting-Started Check List page 1 of 2 (Last updated: April 2015)

    E-Print Network [OSTI]

    . PARKING PERMIT & LOT ASSIGNMENT Don't get ticketed or towed. All vehicles parked on campus (including-Started Check List NOTES: (1) A printable campus map is available in the right-hand menu here: http://inside.mines.edu/Parking campus street parking) must be registered with Parking Services. Go to http://inside.mines.edu/Parking

  2. GETTING STARTED IN THE GREENHOUSE SCHOOL Southern Piedmont Ag Research and Extension Center,

    E-Print Network [OSTI]

    Virginia Tech

    GETTING STARTED IN THE GREENHOUSE SCHOOL Southern Piedmont Ag Research and Extension Center Planning for a Greenhouse Operation Joyce Latimer, VCE 9:30-11:00 Greenhouse Vegetable Production Allen Straw, SW VA AREC, VCE BREAK 11:15-12:30 Greenhouse Structures and Operations (Heating, Cooling

  3. In Situ Imaging of Liquid Water and Ice Formation in an Operating PEFC during Cold Start

    E-Print Network [OSTI]

    . Cold-start capability and survivability of polymer electrolyte fuel cells PEFCs in a subzero is insufficient to contain all of the accumulated water before the cell operating temperature rises above freezing to freeze/ thaw cycling between -40 and 80°C. St-Pierre et al.5 found that if a cell was purged with dry gas

  4. Natural versus forced convection in laminar starting plumes Michael C. Rogers and Stephen W. Morris

    E-Print Network [OSTI]

    Morris, Stephen W.

    fluid from a small, submerged outlet. The plumes were laminar and spanned a wide range of plume, the most important fac- tor determining jet or plume behaviour and evolution is whether the flow is laminar orNatural versus forced convection in laminar starting plumes Michael C. Rogers and Stephen W. Morris

  5. First LNG from North field overcomes feed, start-up problems

    SciTech Connect (OSTI)

    Redha, A.; Rahman, A.; Al-Thani, N.H.; Ishikura, Masayuki; Kikkawa, Yoshitsugi

    1998-08-24

    Qatar Gas LNG is the first LNG project in the gas-development program of the world`s largest gas reservoir, North field. The LNG plant was completed within the budget and schedule. The paper discusses the LNG plant design, LNG storage and loading, alternative mercaptan removal, layout modification, information and control systems, training, data management systems, start-up, and performance testing.

  6. Chemical and dynamical discontinuity at the extratropical tropopause based on START08 and WACCM analyses

    E-Print Network [OSTI]

    Pan, Laura

    Chemical and dynamical discontinuity at the extratropical tropopause based on START08 and WACCM gas gradients of O3 and CO, the discontinuity in the chemical composition of the upper troposphere (UT good consistency between the chemical discontinuity in trace gas distributions and the PV gradientbased

  7. Method and device for reducing overpenetration at the start of plasma arc welds

    SciTech Connect (OSTI)

    Sanders, J.M.; Lehmann, J.M.; Ryan, P.M.

    2000-03-14

    A shim for improving plasma arc weld quality has ends tapered at about 25{degree} and notches at each end roughly centered over the corner between the tapered ends and main body of the shim. The improved shim allows lower starting plasma arc heat input and reduces the occurrence of sagging, or overpenetration, of the weld.

  8. Vehicle Technologies Office: AVTA- Start-Stop (Micro) Hybrid Vehicles Performance Data

    Broader source: Energy.gov [DOE]

    The Advanced Vehicle Testing Activity (AVTA) uses standard procedures and test specifications to test and collect data from vehicles on dynamometers, closed test tracks, and on-the-road. Performance and testing data on the stop-start hybrid versions of the following vehicles is available: 2010 Smart Fortwo, 2010 Volkswagen Golf Diesel, and 2010 Mazda3 Hatchback.

  9. Examination of microbial fuel cell start-up times with domestic wastewater and additional amendments

    E-Print Network [OSTI]

    Examination of microbial fuel cell start-up times with domestic wastewater and additional, University Park, PA 16802, USA c State Key Laboratory of Clean Energy Utilization, Department of Energy Available online 30 April 2011 Keywords: Microbial fuel cell Domestic wastewater Startup time Substrate a b

  10. Andor XDI Start Up/Shut Down 1. Turn on power strip against wall.

    E-Print Network [OSTI]

    Goldman, Robert D.

    Andor XDI Start Up/Shut Down Turn On: 1. Turn on power strip against wall. a. Wait until you hear a noise from the spinning disk. 2. (Optional) If you want CO2/Heated chamber turn on the power switch these. 5. Turn off power strip TIPS: 1. If your imaging isn't going well first check that the optical

  11. For students starting in Fall 2014 BA Double Major Social Studies & Secondary Education

    E-Print Network [OSTI]

    ­ Intro. to Environmental Studies 3 EDU 102 ­ Philosophy of Education OR EDU 103 ­ History of Education 3For students starting in Fall 2014 BA Double Major Social Studies & Secondary Education Major in Social Studies ­ Discipline Courses Major in Secondary Education - Courses Practicum Requirements ESG 100

  12. Big Data Big Talent The Master's in Business Analytics program starting Spring 2015 is designed to

    E-Print Network [OSTI]

    Huang, Haiying

    Business Analytics Big Data Big Talent The Master's in Business Analytics program starting Spring Intelligence Web and Social Analytics Big Data Analytics Python for Data Analytics Forecasting Applied 2015 is designed to create an empowered workforce that understands how data - regardless of size

  13. The agreement gives the go-ahead for work to start

    E-Print Network [OSTI]

    and endless energy resource in the years ahead. "We represent more than half of the world's population that the billions of euros would result in a commercially viable energy source. "Investment in energy efficiency in Brussels gives the go-ahead for practical work on the project to start. Nuclear fusion taps energy from

  14. Method and device for reducing overpenetration at the start of plasma arc welds

    DOE Patents [OSTI]

    Sanders, John M. (Jackson Township, Stark County, OH); Lehmann, John M. (Bedford County, VA); Ryan, Patrick M. (Washington Township, Stark County, OH)

    1998-01-01

    A shim for improving plasma arc weld quality has ends tapered at about 25.degree. and notches at each end roughly centered over the corner between the tapered ends and main body of the shim. The improved shim allows lower starting plasma arc heat input and reduces the occurrence of sagging, or overpenetration, of the weld.

  15. Start S Morgan St End 1933 W Polk St, Chicago, IL 60612

    E-Print Network [OSTI]

    Spirtes, Peter

    Start S Morgan St End 1933 W Polk St, Chicago, IL 60612 When 10/5/11 after 9:09pm Duration 19 mins total Loading... ©2011 Google - Map data ©2011 Google, Sanborn - S Morgan St to 1933 W Polk St, Chicago District Walk to 1933 W Polk St, Chicago, IL 60612 Beta: Use caution ­ This route may be missing sidewalks

  16. Start S Morgan St End 1933 W Polk St, Chicago, IL 60612

    E-Print Network [OSTI]

    Spirtes, Peter

    Start S Morgan St End 1933 W Polk St, Chicago, IL 60612 When 10/5/11 after 7:00pm Duration 11 mins total Loading... ©2011 Google - Map data ©2011 Google, Sanborn - S Morgan St to 1933 W Polk St, Chicago stops) Polk & Wolcott Walk to 1933 W Polk St, Chicago, IL 60612 About 1 min 1933 W Polk St, Chicago, IL

  17. Start S Morgan St End 1933 W Polk St, Chicago, IL 60612

    E-Print Network [OSTI]

    Spirtes, Peter

    Start S Morgan St End 1933 W Polk St, Chicago, IL 60612 When 10/5/11 after 9:00pm Duration 17 mins total Loading... ©2011 Google - Map data ©2011 Google, Sanborn - S Morgan St to 1933 W Polk St, Chicago mins Harrison & Morgan Bus - 7 - Harrison towards Central 9:07pm - 9:14pm (7 mins, 10 stops) Polk

  18. HKUST ENTREPRENEURSHIP CENTER "BUILDYOUR OWN BUSINESS "SEMINAR Starting new venture as

    E-Print Network [OSTI]

    ;DIFFICULTIES FACED INTHE STARTING STAGE Huge investment Correct direction Immature Infrastructure HRM many years ago Good HRM -With CSR in mind and develop well-planned HRM #12;HUMAN RESOURCES MANAGEMENT (HRM) Training and Development - Company System training within working hours - System Integration

  19. Where to Start Reading a Textual XML Document? Jaap Kamps1,2

    E-Print Network [OSTI]

    Kamps, Jaap

    the user to go straight to the relevant material. This paper looks at the so-called best entry points (BEPs choose the best entry point some distance from the start of the document. Second, many of the best entry Retrieval, Element retrieval, Best entry point 1. INTRODUCTION Focused structured document retrieval employs

  20. ICS313 Game Demonstrations, POST 126 Monday, Dec. 2, 2013 (starting at1:30 pm)

    E-Print Network [OSTI]

    Reed, Nancy E.

    Savior By Jaimar and Micah Code Monkey By Taylor, Alvin and Brent The Aragorn Trail By William G Sharknado By Michael W. and Steven R. Wednesday, Dec. 4, 2013 (starting at1:30 pm) Starbreak By Andy, Troy By Taylor, Alvin and Brent #12;The Aragorn Trail By William G. and Michael T. #12;Don't Die Day, a Zombie

  1. NSTX Weekly Report (December 10, 2010) FY 2011 NSTX plasma operations started on October 4, 2010

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    cable installations for the addition of the second Switching Power Amplifier system. Access to the NSTX, helium and water piping modifications needed for the new MSE-LIF diagnostic continued, as well as power (LLD) - Design and planning work started for fabricating and testing an upgraded ceramic break

  2. NSTX Weekly Report (December 17, 2010) FY 2011 NSTX plasma operations started on October 4, 2010

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    , and poloidal velocities and their radial shearing rate are well correlated with the fraction of D-alpha light Lithium Divertor (LLD) plates and surrounding tiles, and the start of in-vessel tile sanding Switching Power Amplifier system have been installed and tested this week, and helium and water piping

  3. 2014/15 Whole Group Timetable Semester 2 Code Module Title Event Type Day Start Finish

    E-Print Network [OSTI]

    Banaji,. Murad

    Start Finish Timetable Weeks Lecturer Room Name Room Code Capacity Class Size 643672 AM1004 American Lecture Theatre 3 KE LT3 150 137 705552 AM1004 American History, 1877-Present Lecture Mon 15:00 16:00 TT Weeks 14-22, 24 Johnstone A E Dr Attenborough Basement Lecture Theatre 1 ATT LT1 204 137 643719 AM1005

  4. Statewide average major timber product prices started the year on a decline except

    E-Print Network [OSTI]

    Statewide average major timber product prices started the year on a decline except for a slight rise in hardwood pulpwood price. Pine sawlog price continued to fall during the January/February 2008 period. State- wide pine sawlog averaged $35.20/ton, the lowest price since January 2006. This was a 5

  5. Cold starting capabilities of petroleum and syntehetic lubricants in heavy-duty diesel engines

    SciTech Connect (OSTI)

    Margeson, M.A.; Belmesch, B.J. )

    1989-01-01

    The objective of the work described in this paper was to compare the cold weather starting ability of diesel engines lubricated with SAE 15W-40 petroleum and SAE 5W-30 synthetic motor oil. Laboratory bench tests were used to compare rhelogical features such as borderline pumping temperature and cold cranking simulator profiles. A cold box provided a well controlled environment in which cranking and starting studies were carried out on the two oils in a turbocharged diesel engine. The SAE 5W-30 synthetic exhibited higher cranking speeds, lower starter amperage draw and immediate oil pressure readings when compared to the SAE l5W-40 petroleum. The SAE 5W-30 synthetic oil was safely started at {minus} l0 {sup 0}F oil temperature without auxiliary heaters. The comparative cylinder turbocharged diesel engines representing conditions commonly found in the commercial and off-highway sectors, These studies indicate that combining high capacity cold cranking amperage batteries, high pressure ether aid injection, and SAE 5W-30 synthetic oil resulted in a system that safely starts diesel engines down to actual oil temperatures of at least {minus} 10 {sup 0}F.

  6. PNNL delivers expertise, technology to biofuels start-up, InEnTec

    ScienceCinema (OSTI)

    None

    2012-12-31

    Initially through its Entrepreneurial Leave of Absence Program, PNNL gives biofuels innovators a start in opening up a new business based on technology developed for incinerating waste on the Hanford Site. Today, the companies Plasma Enhanced Melters are in operation around the world converting organic waste into valuable, clean fuels.

  7. HOW TO FORMAT PHOTOS FOR PUBLICATION 1. Start Paint.net

    E-Print Network [OSTI]

    Alpay, S. Pamir

    HOW TO FORMAT PHOTOS FOR PUBLICATION 1. Start Paint.net 2. Open your photo by selecting FILE, OPEN. You photo will appear in the PAINT. NET screen 3. At the top of the window, click the IMAGE link. 4 should still be visible in PAINT.NET. If not, reopen it. All THUMBNAILS should be sized to 85x85 pixels

  8. >> The broadcast is now starting, all attendees are in listen-only mode.

    E-Print Network [OSTI]

    Baker, Chris I.

    pertinent to grantees. So the archived webinar will be hosted publicly. So that the information is available to all our foreign grantees. This presentation is intended to provide information for staff so that you to appropriately advise grantees when you receive questions about the changes. With that intro done, let me start

  9. For students starting in Fall 2015 BSc. Science Teaching Major -Chemistry Concentration & Secondary Education

    E-Print Network [OSTI]

    Physical Chemistry I (+ Lab CHL 131) 3 CHM 141 Analytical Chemistry (+ Lab CHL 141) 3 CHM 111 OrganicFor students starting in Fall 2015 BSc. Science Teaching Major - Chemistry Concentration Technology 3 SLP 399 International Situated Learning Major in Chemistry ­ Discipline Courses (48 credits) All

  10. Prince Entrepreneurship Program At Stetson University, entrepreneurship isn't just about starting

    E-Print Network [OSTI]

    Miles, Will

    Prince Entrepreneurship Program At Stetson University, entrepreneurship isn't just about starting Features The School of Business Administration, through the Joseph C. Prince Entrepreneurship Program-up enterprises. Fast Facts Faculty: 1 Program website: stetson.edu/prince Contact: William Andrews wandrews

  11. A Bibliography of Genealogical Resources at the University of Idaho Library Where to Start Searching

    E-Print Network [OSTI]

    O'Laughlin, Jay

    A Bibliography of Genealogical Resources at the University of Idaho Library Where to Start a subject search of su: Latah County Genealogy. More family histories and general guides to early settlers: Whitman County Genealogy. For many more Idaho Genealogical resources, and also for other states, try

  12. Transient Analysis of Proton Electrolyte Membrane Fuel Cells (PEMFC) at Start-Up

    E-Print Network [OSTI]

    Yanikoglu, Berrin

    Transient Analysis of Proton Electrolyte Membrane Fuel Cells (PEMFC) at Start-Up and Failure M. F perfor- mance of the fuel cell has already been reported, when inter- digitated flow fields are used [1 with experiments to study the effect of temperature, humidity, and pressure on fuel cell performance

  13. ECEMA 2000 Sequential constructs 2.1 Declarations and sequential constructs

    E-Print Network [OSTI]

    Aboulhamid, El Mostapha

    © ECEMA 2000 Sequential constructs 2.1 SECTION 2 Declarations and sequential constructs Page conversions 2.32 Sequential statements 2.36 Subprograms 2.50 © ECEMA 2000 Sequential constructs 2.2 Lexical " # & ' () +, -. / : ; _ | ! $ % @ ? [ ] ^ ` {} ~ * Space An identifier is · letter {[underline] letter_or_digit} · not case sensitive #12;© ECEMA 2000

  14. Bridging nanotechnological opportunities and construction needs A survey of nanoinnovation in Danish Construction

    E-Print Network [OSTI]

    Bridging nanotechnological opportunities and construction needs NanoByg A survey of nanoinnovation in Danish Construction Risø-R-1602 (EN) Risø National Laboratory Technical University of Denmark Roskilde in Danish construction Department: Systems Analysis Department Risø-R-1602 (EN) May 2007 ISSN 0106-2840 ISBN

  15. Bridging nanotechnological opportunities and construction needs A survey of nanoinnovation in Danish construction

    E-Print Network [OSTI]

    Bridging nanotechnological opportunities and construction needs NanoByg A survey of nanoinnovation in Danish construction Executive summary, English May 2007 #12;NanoByg Author: Maj Munch Andersen, Måns Molin Title: NanoByg ­ A survey of nanoinnovation in Danish construction ­ Executive summary English

  16. Bridging nanotechnological opportunities and construction needs A survey of nanoinnovation in Danish construction

    E-Print Network [OSTI]

    Bridging nanotechnological opportunities and construction needs NanoByg A survey of nanoinnovation in Danish construction Executive summary, Dansk Maj 2007 #12;NanoByg Author: Maj Munch Andersen, Måns Molin Title: NanoByg ­ A survey of nanoinnovation in Danish construction ­ Executive summary Dansk Department

  17. Compiler Construction--The Art of Niklaus Wirth 1 Compiler Construction

    E-Print Network [OSTI]

    Mössenböck, Hanspeter

    Compiler Construction--The Art of Niklaus Wirth 1 Compiler Construction The Art of Niklaus Wirth a master of language design but also a pioneer of compiler construction. For four decades he has refined his techniques for building simple, efficient and reliable compilers. This paper tries to collect some

  18. Construction Standards and Costs UC Irvine new construction pursues performance goals and applies quality standards that

    E-Print Network [OSTI]

    Rose, Michael R.

    Construction Standards and Costs UC Irvine new construction pursues performance goals and applies quality standards that affect the costs of capital projects. Periodic re-examination of these goals and standards is warranted. Construction costs are not "high" or "low" in the abstract, but rather in relation

  19. The Gemini Planet Imager: From Science to Design to Construction

    SciTech Connect (OSTI)

    Macintosh, B; Graham, J R; Palmer, D; Doyon, R; Dunn, J; Gavel, D; Larkin, J; Oppenheimer, B; Saddlemyer, L; Sivaramakrishnan, A; Wallace, J K; Bauman, B; Erickson, D; Marois, C; Poyneer, L; Soummer, R

    2008-07-01

    The Gemini Planet Imager (GPI) is a facility instrument under construction for the 8-m Gemini South telescope. It combines a 1500 subaperture AO system using a MEMS deformable mirror, an apodized-pupil Lyot coronagraph, a high-accuracy IR interferometer calibration system, and a near-infrared integral field spectrograph to allow detection and characterization of self-luminous extrasolar planets at planet/star contrast ratios of 10{sup -7}. I will discuss the evolution from science requirements through modeling to the final detailed design, provide an overview of the subsystems and show models of the instrument's predicted performance.

  20. Construction progress of the RHIC electron lenses

    SciTech Connect (OSTI)

    Fischer W.; Altinbas, Z.; Anerella, M.; Beebe, E.; et al

    2012-05-20

    In polarized proton operation the RHIC performance is limited by the head-on beam-beam effect. To overcome this limitation two electron lenses are under construction. We give an overview of the construction progress. Guns, collectors and the warm electron beam transport solenoids with their power supplies have been constructed. The superconducting solenoids that guide the electron beam during the interaction with the proton beam are near completion. A test stand has been set up to verify the performance of the gun, collector and some of the instrumentation. The infrastructure is being prepared for installation, and simulations continue to optimize the performance.

  1. Protein Structure Modeling With MODELLER Narayanan Eswar$

    E-Print Network [OSTI]

    Sali, Andrej

    of MODELLER to construct a comparative model for a protein with unknown structure. Automation of similar se- quence and the template(s); (iii) building a model based on the alignment with the cho- sen user intervention and within minutes on a desktop computer. Apart from model building, MODELLER can

  2. EIS-0458: Proposed Loan Guarantee to Support Construction and Startup of the Topaz Solar Farm, San Luis Obispo County, CA

    Broader source: Energy.gov [DOE]

    This EIS evaluates the environmental impacts from DOE’s proposal to issue a federal loan guarantee to Royal Bank of Scotland to provide funding to Topaz Solar Farms, LLC, to construct and start up the Topaz Solar Farm, a nominal 550-megawatt photovoltaic solar energy generating facility. The facility would be located in unincorporated eastern San Luis Obispo County, California, approximately one mile north of the community of California Valley, California, and six miles northwest of the Carrizo Plain National Monument.

  3. Interpretation of simulated global warming using a simple model

    SciTech Connect (OSTI)

    Watterson, I.G.

    2000-01-01

    A simple energy balance model with two parameters, an effective heat capacity and an effective climate sensitivity, is used to interpret six GCM simulations of greenhouse gas-induced global warming. By allowing the parameters to vary in time, the model can be accurately calibrated for each run. It is found that the sensitivity can be approximated as a constant in each case. However, the effective heat capacity clearly varies, and it is important that the energy equation is formulated appropriately, and thus unlike many such models. For simulations with linear forcing and from a cold start, the capacity is in each case close to that of a homogeneous ocean with depth initially 200 m, but increasing some 4.3 m each year, irrespective of the sensitivity and forcing growth rate. Analytic solutions for t his linear capacity function are derived, and these reproduce the GCM runs well, even for cases where the forcing is stabilized after a century or so. The formation of a subsurface maximum in the mean ocean temperature anomaly is a significant feature of such cases. A simple model for a GCM run with a realistic forcing scenario starting from 1,880 is constructed using component results for forcing segments. Given this, an estimate of the cold start error of a simulation of the warming due to forcing after the present would be given by the negative of the temperature drift of the anomaly due to the past forcing. The simple model can evidently be used to give an indication of likely warming curves, at lest for this range of scenarios and GCM sensitivities.

  4. Standard information system for construction management 

    E-Print Network [OSTI]

    Sultanbekov, Kanat A

    2000-01-01

    , data communication and integration between different organizations still remains a "gray" area in construction management. There are several means of communication used in the industry: mail, phone, fax and information technology. Yet, only...

  5. DNA Assembly Line for Nano-Construction

    ScienceCinema (OSTI)

    Oleg Gang

    2010-01-08

    Building on the idea of using DNA to link up nanoparticles scientists at Brookhaven National Lab have designed a molecular assembly line for high-precision nano-construction. Nanofabrication is essential for exploiting the unique properties of nanoparticl

  6. Replay: a self-documenting construction kit

    E-Print Network [OSTI]

    Tseng, Tiffany

    2012-01-01

    Replay is a self-documenting construction kit for children to both share their designs with others and reflect on their own design process. Replay consists of a set of angular pieces that can sense their connection and ...

  7. Construction Permits and Fees (New Mexico)

    Broader source: Energy.gov [DOE]

    Industries that wish to build or modify facilities that emit air pollutants (emissions) into the air must obtain an air quality permit prior to constructing. Thus, these permits are called...

  8. Construction of a regular 17-gon

    E-Print Network [OSTI]

    Hence our construction is possible if we can reduce the solution of. (5.8.1) to that of such a series of equations. The problem was solved by Gauss, who proved ...

  9. Self-assembling multimeric nucleic acid constructs

    DOE Patents [OSTI]

    Cantor, Charles R. (Boston, MA); Niemeyer, Christof M. (Bremen, DE); Smith, Cassandra L. (Boston, MA); Sano, Takeshi (Boston, MA); Hnatowich, Donald J. (Brookline, MA); Rusckowski, Mary (Southborough, MA)

    1996-01-01

    The invention is directed to constructs and compositions containing multimeric forms of nucleic acid. Multimeric nucleic acids comprise single-stranded nucleic acids attached via biotin to streptavidin and bound with a functional group. These constructs can be utilized in vivo to treat or identify diseased tissue or cells. Repeated administrations of multimeric nucleic acid compositions produce a rapid and specific amplification of nucleic acid constructs and their attached functional groups. For treatment purposes, functional groups may be toxins, radioisotopes, genes or enzymes. Diagnostically, labeled multimeric constructs may be used to identify specific targets in vivo or in vitro. Multimeric nucleic acids may also be used in nanotechnology and to create self-assembling polymeric aggregates such as membranes of defined porosity, microcircuits and many other products.

  10. Self-assembling multimeric nucleic acid constructs

    DOE Patents [OSTI]

    Cantor, Charles R. (Boston, MA); Niemeyer, Christof M. (Bremen, DE); Smith, Cassandra L. (Boston, MA); Sano, Takeshi (Boston, MA); Hnatowich, Donald J. (Brookline, MA); Rusckowski, Mary (Southborough, MA)

    1999-10-12

    The invention is directed to constructs and compositions containing multimeric forms of nucleic acid. Multimeric nucleic acids comprise single-stranded nucleic acids attached via biotin to streptavidin and bound with a functional group. These constructs can be utilized in vivo to treat or identify diseased tissue or cells. Repeated administrations of multimeric nucleic acid compositions produce a rapid and specific amplification of nucleic acid constructs and their attached functional groups. For treatment purposes, functional groups may be toxins, radioisotopes, genes or enzymes. Diagnostically, labeled multimeric constructs may be used to identify specific targets in vivo or in vitro. Multimeric nucleic acids may also be used in nanotechnology and to create self-assembling polymeric aggregates such as membranes of defined porosity, microcircuits and many other products.

  11. New Construction Commercial Reference Buildings — Archive

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  12. Constructed Wetlands for Industry in Thailand

    E-Print Network [OSTI]

    - Establish in 1998 - Research focuses in ­ Management/Treatment/Disposal ­ Bioremediation / Phytoremediation treatment ponds 1 water quality improvement pond #12;23/05/2012 5 The Constructed Wetland System - Shallow

  13. Digital Construction Platform: A Compound Arm Approach

    E-Print Network [OSTI]

    Spielberg, Nathan A.

    2014-01-01

    We introduce a novel large-scale Digital Construction Platform (DCP) for on-site sensing, analysis, and fabrication. The DCP is an in-progress research project consisting of a compound robotic arm system comprised of a ...

  14. CPS Energy- New Commercial Construction Incentives

    Broader source: Energy.gov [DOE]

    CPS Energy offers incentives for new commercial construction that is at least 15% more efficient than required by the City of San Antonio Building Code (based on IECC 2009). The building code and...

  15. CPS Energy- New Residential Construction Incentives

    Broader source: Energy.gov [DOE]

    CPS Energy offers incentives for new residential construction that is at least 15% more efficient than required by the [http://dsireusa.org/incentives/incentive.cfm?Incentive_Code=TX29R&re=1...

  16. Self-assembling multimeric nucleic acid constructs

    DOE Patents [OSTI]

    Cantor, C.R.; Niemeyer, C.M.; Smith, C.L.; Sano, Takeshi; Hnatowich, D.J.; Rusckowski, M.

    1996-10-01

    The invention is directed to constructs and compositions containing multimeric forms of nucleic acid. Multimeric nucleic acids comprise single-stranded nucleic acids attached via biotin to streptavidin and bound with a functional group. These constructs can be utilized in vivo to treat or identify diseased tissue or cells. Repeated administrations of multimeric nucleic acid compositions produce a rapid and specific amplification of nucleic acid constructs and their attached functional groups. For treatment purposes, functional groups may be toxins, radioisotopes, genes or enzymes. Diagnostically, labeled multimeric constructs may be used to identify specific targets in vivo or in vitro. Multimeric nucleic acids may also be used in nanotechnology and to create self-assembling polymeric aggregates such as membranes of defined porosity, microcircuits and many other products. 5 figs.

  17. General Construction Company Private Development Procedure

    E-Print Network [OSTI]

    Eason, Scott W.

    2006-05-19

    superintendent is handed the project • Personnel placement: a network of field personnel within the grading, bridge and paving divisions are chosen by the superintendent, as well as, subcontractors are utilized • Working to completion: successfully constructing...

  18. Construction project partnering in Texas' public universities 

    E-Print Network [OSTI]

    Francis, Paul

    2007-09-17

    Proposal (CSP): A project delivery method in which the owner first selects an architect to design the project, and once the construction documents are fully complete, they (the owner in consultation with the architect) request competitive sealed...

  19. General overview of the Nigerian construction industry

    E-Print Network [OSTI]

    Dantata, Sanusi (Sanusi A.)

    2008-01-01

    The purpose of this study is to investigate and provide a general overview of the Nigerian construction industry, its role in the national economy, the main participants in the industry, the problems that they face, and ...

  20. Landscape Design, Construction and Management Concentration

    E-Print Network [OSTI]

    Isaacs, Rufus

    plant production, landscape design, construction and maintenance, marketing, management: HRT 213 (2) Landscape Maintenance HRT 213L(1) Landscape Maintenance Field Lab HRT 214 (2) Landscape and Turfgrass Business Operations HRT 219 (2) Landscape CAD HRT 220 (3) Annual