Powered by Deep Web Technologies
Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Moab Mill Tailings Removal Project Celebrates 5 Years of Success |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success October 3, 2012 - 12:00pm Addthis Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Moab Federal Project Director Donald Metzler stands on a final cover layer of the disposal cell. Several other layers are visible behind him. Moab Federal Project Director Donald Metzler stands on a final cover layer

2

Moab Mill Tailings Removal Project Celebrates 5 Years of Success |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mill Tailings Removal Project Celebrates 5 Years of Success Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success October 3, 2012 - 12:00pm Addthis Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Moab Federal Project Director Donald Metzler stands on a final cover layer of the disposal cell. Several other layers are visible behind him. Moab Federal Project Director Donald Metzler stands on a final cover layer

3

Moab Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches Significant Milestone Moab Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches Significant Milestone June 3, 2011 - 12:00pm Addthis Media Contacts Donald Metzler Moab Federal Project Director (970) 257-2115 Wendee Ryan S&K Aerospace Public Affairs Manager (970) 257-2145 Grand Junction, CO - One quarter of the uranium mill tailings pile located in Moab, Utah, has been relocated to the Crescent Junction, Utah, site for permanent disposal. Four million tons of the 16 million tons total has been relocated under the Uranium Mill Tailings Remedial Action Project managed by the U.S. Department of Energy (DOE). A little over 2 years ago, Remedial Action Contractor EnergySolutions began

4

Moab Uranium Mill Tailings Cleanup Project Steps into Spotlight at  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Uranium Mill Tailings Cleanup Project Steps into Spotlight at Uranium Mill Tailings Cleanup Project Steps into Spotlight at International Meeting in Vienna Moab Uranium Mill Tailings Cleanup Project Steps into Spotlight at International Meeting in Vienna October 22, 2012 - 12:00pm Addthis Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler Moab Federal Project Director Donald Metzler Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler

5

DOE Awards Technical Assistance Contract for Moab Mill Tailings Cleanup |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Assistance Contract for Moab Mill Tailings Technical Assistance Contract for Moab Mill Tailings Cleanup DOE Awards Technical Assistance Contract for Moab Mill Tailings Cleanup May 31, 2012 - 12:00pm Addthis Media Contact Bill Taylor bill.taylor@srs.gov 803-952-8564 Cincinnati-The U.S. Department of Energy (DOE) today announced the award of an $18 million small disadvantaged business contract with S&K Aerospace, LLC, of St. Ignatius, Montana to continue to provide technical assistance services for the Moab Uranium Mill Tailings Remedial Action (UMTRA) Project in Moab, Utah. The basic contract is for three years with two one-year options to extend, for a total of up to five years. S&K Aerospace, LLC, a tribal organization 8(a) small business, will assist in the Department's removal of uranium tailings at the former Atlas

6

CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE August 2, 2010 - 12:00pm Addthis A sheep’s foot roller compacts the tailings in the disposal cell. A sheep's foot roller compacts the tailings in the disposal cell. Moab, UT MILL TAILINGS REMOVAL Sixteen million tons of uranium mill tailings 80 feet high stood on the banks of the Colorado River near Moab in southeast Utah, as a legacy to the former ore-processing site that operated for nearly three decades beginning in the mid-1950s. That is until April 2009, when the U.S. Department of Energy began moving the tailings by rail to an engineered disposal cell constructed 30 miles north near Crescent Junction, Utah. The mill tailings,

7

DOE Amends Decision for the Remediation of the Moab Uranium Mill Tailings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Amends Decision for the Remediation of the Moab Uranium Mill Amends Decision for the Remediation of the Moab Uranium Mill Tailings in Moab, Utah DOE Amends Decision for the Remediation of the Moab Uranium Mill Tailings in Moab, Utah February 29, 2008 - 11:43am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced an amendment to its 2005 Record of Decision (ROD) for the Moab Uranium Mill Tailings Remedial Action (UMTRA) Project to allow for the use of truck or rail in transporting residual radioactive materials from the Moab site in Utah. These materials will be relocated to a new disposal site 30 miles north at Crescent Junction, Utah. "The Department is committed to ensuring the protection of human health and the environment in the Moab area and in the communities served by the Colorado River," Assistant Secretary for Environmental Management Jim

8

DOE to Transport Moab Mill Tailings by Rail | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to Transport Moab Mill Tailings by Rail to Transport Moab Mill Tailings by Rail DOE to Transport Moab Mill Tailings by Rail August 5, 2008 - 2:40pm Addthis Department Approves Project Baseline and Obtains Nuclear Regulatory Commission Nod WASHINGTON, DC - The U.S. Department of Energy (DOE) today reaffirmed its prior decision to relocate mill tailings predominantly by rail from the former uranium-ore processing site near Moab, Utah, 30 miles north to Crescent Junction, Utah. As determined previously, oversized material that is not practical to be sized to fit into the containers will be transported by truck. "After evaluating the alternatives for safely transporting the mill tailings from Moab and considering input received from citizens in the Moab community and surrounding areas, DOE has decided to ship the tailings using

9

DOE to Transport Moab Mill Tailings by Rail | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transport Moab Mill Tailings by Rail Transport Moab Mill Tailings by Rail DOE to Transport Moab Mill Tailings by Rail August 5, 2008 - 2:40pm Addthis Department Approves Project Baseline and Obtains Nuclear Regulatory Commission Nod WASHINGTON, DC - The U.S. Department of Energy (DOE) today reaffirmed its prior decision to relocate mill tailings predominantly by rail from the former uranium-ore processing site near Moab, Utah, 30 miles north to Crescent Junction, Utah. As determined previously, oversized material that is not practical to be sized to fit into the containers will be transported by truck. "After evaluating the alternatives for safely transporting the mill tailings from Moab and considering input received from citizens in the Moab community and surrounding areas, DOE has decided to ship the tailings using

10

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds The Moab Uranium Mill Tailings Remedial Action Project reached its primary American Recovery and Reinvestment Act milestone ahead of schedule on Wednesday with the disposal of 2 million tons of uranium mill tailings. The project had originally planned to ship 2 million tons of tailings with Recovery Act funds. Now, Recovery Act workers are surpassing that goal. Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds More Documents & Publications EIS-0355: Record of Decision EIS-0355: Draft Environmental Impact Statement EIS-0355: Final Environmental Impact Statement

11

EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

355: Remediation of the Moab Uranium Mill Tailings, Grand and 355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah Summary The Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Environmental Impact Statement and associated supplements and amendments provides information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water

12

DOE Moab Project Safely Removes 7 Million Tons of Mill Tailings  

Energy.gov (U.S. Department of Energy (DOE))

(Grand Junction, CO) ? The U.S. Department of Energy (DOE) has safely moved another million tons of uranium mill tailings from the Moab site in Utah under the Uranium Mill Tailings Remedial Action Project.

13

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site June 18, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager (970) 257-2145 (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. The shipments mark continued progress toward relocating the 16-million-ton uranium mill tailings pile away from the Colorado River. "The federal budget continues to be stretched thin, and I am proud this

14

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site June 18, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager (970) 257-2145 (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. The shipments mark continued progress toward relocating the 16-million-ton uranium mill tailings pile away from the Colorado River. "The federal budget continues to be stretched thin, and I am proud this

15

Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project Accomplishes Milestone While Doing it Safely Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project Accomplishes Milestone While Doing it Safely February 27, 2012 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director, (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager, (970) 257-2145 Grand Junction, CO- The U.S. Department of Energy (DOE) reached another milestone today for the Uranium Mill Tailings Remedial Action Project, having shipped 5 million tons of tailings from the massive pile located in Moab, Utah, to the engineered disposal cell near Crescent Junction, Utah. The pile comprised an estimated 16 million tons total when DOE's Remedial

16

DOE Awards Contract for Moab Mill Tailings Cleanup | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Cleanup Moab Mill Tailings Cleanup DOE Awards Contract for Moab Mill Tailings Cleanup November 4, 2011 - 12:00pm Addthis Media Contact Bill Taylor bill.taylor@srs.gov 803-952-8564 Cincinnati- The Department of Energy (DOE) announced today that it has awarded a competitive small business contract worth $121.2 million over the next five years as part of the Department's continued efforts to protect the Colorado River and downstream water users by removing uranium tailings at the former Atlas uranium-ore processing facility in Moab, Utah. Portage, Inc., a small business based in Idaho Falls, Idaho, will be leading the new contract. "The Moab project has the potential of being one of the Department of Energy's most successful environmental cleanup projects," Donald

17

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Moab Uranium Mill Tailings Remedial Action The Moab Uranium Mill Tailings Remedial Action Project reached its primary American Recovery and Reinvestment Act milestone ahead of schedule on Wednesday with the disposal of 2 million tons of uranium mill tailings. The project had originally planned to ship 2 million tons of tailings with Recovery Act funds. Now, Recovery Act workers are surpass- ing that goal. "Although shipping 2 million tons was the original Recovery Act goal, we are planning to exceed this goal by shipping about 300,000 tons more using savings resulting from efficiencies we've gained in our first 2 years of moving tailings," Moab Federal Project Director Donald Metzler said. The project is using $108 million from the Recovery Act to move the tailings from the banks of the Colorado River by rail to a permanent

18

Moab Mill Tailings Removal Project Plans to Resume Train Shipments...  

Energy Savers (EERE)

result in a cost savings to the project over the long term. Made of -inch durable plastic, the liners will prevent the tailings material, which tends to be sticky, from...

19

Moab Mill Tailings Removal Project Plans to Resume Train Shipments in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Plans to Resume Train Shipments Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return Moab Mill Tailings Removal Project Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return February 25, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, donald.metzler@gjem.doe.gov 970-257-2115 Jeff Biagini, jeff.biagini@gjemrac.doe.gov 970-257-2117 Wendee Ryan, wryan@gjemtac.doe.gov 970-257-2145 Grand Junction, CO - All 27 employees of the Remedial Action Contractor (RAC) to the U.S. Department of Energy will return to work on the Uranium Mill Tailings Remedial Action Project on March 4, following a 3-month planned furlough. Project shipping and disposal operations have been shut down, as planned, since late November 2012, but are scheduled to resume

20

Moab Project Continues Progress on Tailings Removal with Contract  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Project Continues Progress on Tailings Removal with Contract Moab Project Continues Progress on Tailings Removal with Contract Transition Moab Project Continues Progress on Tailings Removal with Contract Transition December 27, 2012 - 12:00pm Addthis Laborers place a disposable liner in a tailings container. Laborers place a disposable liner in a tailings container. MOAB, Utah - The Moab mill tailings removal project in Utah ended the year having shipped more than 35 percent of the total 16 million tons of uranium mill tailings off-site. The tailings are being transported by rail 30 miles north to a disposal cell for permanent storage. More than 1 million tons of tailings were shipped during fiscal year 2012, which closed at the end of September. The Moab Project also successfully transitioned both of its prime contracts

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Moab Project Continues Progress on Tailings Removal with Contract  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Project Continues Progress on Tailings Removal with Contract Moab Project Continues Progress on Tailings Removal with Contract Transition Moab Project Continues Progress on Tailings Removal with Contract Transition December 27, 2012 - 12:00pm Addthis Laborers place a disposable liner in a tailings container. Laborers place a disposable liner in a tailings container. MOAB, Utah - The Moab mill tailings removal project in Utah ended the year having shipped more than 35 percent of the total 16 million tons of uranium mill tailings off-site. The tailings are being transported by rail 30 miles north to a disposal cell for permanent storage. More than 1 million tons of tailings were shipped during fiscal year 2012, which closed at the end of September. The Moab Project also successfully transitioned both of its prime contracts

22

Moab Project Continues Excellent Safety Record  

Energy.gov (U.S. Department of Energy (DOE))

MOAB, Utah The Moab Uranium Mill Tailings Remedial Action Project has had a safe, productive year.

23

DOE Signs Decision to Move Moab Tailings | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Decision to Move Moab Tailings Decision to Move Moab Tailings DOE Signs Decision to Move Moab Tailings September 14, 2005 - 10:23am Addthis WASHINGTON, DC - U.S. Secretary of Energy Samuel W. Bodman today announced that a Record of Decision (ROD) clearing the way for the removal of 11.9 million tons of radioactive Uranium Mill Tailings from the banks the Colorado River in Utah has been signed. Under the Moab Uranium Mill Tailings Remedial Action Project Site Record of Decision, the tailings will be moved, predominately by rail, to the proposed Crescent Junction, Utah, site more than 30 miles from the Colorado River. "Today's announcement shows that through hard work and cooperative efforts, great progress can be made," Secretary Bodman said. "This decision demonstrates our commitment to fulfilling our Cold War cleanup obligations

24

DOE/EIS-0355 Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Volumes IV Volumes IV Chapters 4 -5 Comment Responses U.S. Department of Energy Office of Environmental Management Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah Final Environmental Impact Statement i Contents Volume IV 4.0 Responses............................................................................................................................4-1 4.1 Response Index Tables ..............................................................................................4-1 4.2 Responses to Comments ..........................................................................................4-70 5.0 References...........................................................................................................................5-1

25

Moab Reaches 40-Percent Mark in Tailings Removal | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Reaches 40-Percent Mark in Tailings Removal Moab Reaches 40-Percent Mark in Tailings Removal Moab Reaches 40-Percent Mark in Tailings Removal December 24, 2013 - 12:00pm Addthis A haul truck carrying a container is loaded with mill tailings at the Moab site. Once loaded and lidded, the container will be placed on a railcar for shipment by train to the Crescent Junction disposal site. A haul truck carrying a container is loaded with mill tailings at the Moab site. Once loaded and lidded, the container will be placed on a railcar for shipment by train to the Crescent Junction disposal site. MOAB, Utah - The Moab Uranium Mill Tailings Remedial Action Project had a productive year, despite continued budget constraints and a first-ever, three-month curtailment of shipping operations last winter. On June 18, the project reached a significant milestone of having shipped 6

26

DOE/EIS-0355 Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summary Summary U.S. Department of Energy Office of Environmental Management COVER SHEET Lead Agency: U.S. Department of Energy Cooperating Agencies: * National Park Service * Bureau of Land Management * U.S. Nuclear Regulatory Commission * U.S. Army Corps of Engineers * U.S. Fish and Wildlife Service * State of Utah * U.S. Environmental Protection Agency * Ute Mountain Ute Tribe * San Juan County * Grand County * City of Blanding * Community of Bluff Title: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement (DOE/EIS-0355). Contact: For further information about this Environmental Impact Statement, contact: Don Metzler Moab Federal Project Director U.S. Department of Energy 2597 B ¾ Road

27

DOE/EIS-0355 Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

I I Chapters 1-11 U.S. Department of Energy Office of Environmental Management COVER SHEET Lead Agency: U.S. Department of Energy Cooperating Agencies: * National Park Service * Bureau of Land Management * U.S. Nuclear Regulatory Commission * U.S. Army Corps of Engineers * U.S. Fish and Wildlife Service * State of Utah * U.S. Environmental Protection Agency * Ute Mountain Ute Tribe * San Juan County * Grand County * City of Blanding * Community of Bluff Title: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement (DOE/EIS-0355). Contact: For further information about this Environmental Impact Statement, contact: Don Metzler Moab Federal Project Director U.S. Department of Energy

28

DOE/EIS-0355 Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

II II Appendices A-H U.S. Department of Energy Office of Environmental Management Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah Final Environmental Impact Statement i Contents Page Volume II Appendix A, Biological Assessment/Screening Level Risk Assessment/Biological Opinion Appendix A1, Biological Assessment A1-1.0 Introduction ..............................................................................................................A1-1 A1-2.0 Species Evaluated.....................................................................................................A1-3 A1-2.1 Critical Habitat..................................................................................................A1-3 A1-3.0 Consultation to Date.................................................................................................A1-4

29

Moab Resumes Rail Shipments After Rockslide  

Energy.gov (U.S. Department of Energy (DOE))

MOAB, Utah EMs Moab Uranium Mill Tailings Remedial Action Project recently resumed rail shipments after an almost two-month halt due to a major rockslide.

30

MOAB PROJECT REACHES SIGNIFICANT MILESTONE | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MOAB PROJECT REACHES SIGNIFICANT MILESTONE MOAB PROJECT REACHES SIGNIFICANT MILESTONE MOAB PROJECT REACHES SIGNIFICANT MILESTONE August 1, 2011 - 12:00pm Addthis View of the mill tailings pile at the MOAB site, looking east. View of the mill tailings pile at the MOAB site, looking east. The day crew at the Crescent Junction Disposal site stands in front of the container carrying the 4 millionth ton of mill tailings from the Moab site. The day crew at the Crescent Junction Disposal site stands in front of the container carrying the 4 millionth ton of mill tailings from the Moab site. View of the mill tailings pile at the MOAB site, looking east. The day crew at the Crescent Junction Disposal site stands in front of the container carrying the 4 millionth ton of mill tailings from the Moab site. Moab, UT - One quarter of the uranium mill tailings pile located in Moab,

31

Moab Site | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Site Moab Site Moab Site Two scrapers work together to excavate Mancos Shale at the Crescent Junction site to create the second portion of a disposal cell for uranium mill tailings Two scrapers work together to excavate Mancos Shale at the Crescent Junction site to create the second portion of a disposal cell for uranium mill tailings One of two gantry cranes that load and unload tailings containers from the railcars is pictured on the hillside rail bench west of Moab One of two gantry cranes that load and unload tailings containers from the railcars is pictured on the hillside rail bench west of Moab Two scrapers work together to excavate Mancos Shale at the Crescent Junction site to create the second portion of a disposal cell for uranium mill tailings One of two gantry cranes that load and unload tailings containers from the railcars is pictured on the hillside rail bench west of Moab

32

EM Leaders Visit Employees at Moab Site | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Leaders Visit Employees at Moab Site Leaders Visit Employees at Moab Site EM Leaders Visit Employees at Moab Site March 14, 2013 - 12:00pm Addthis Moab Site employees Moab Site employees EM Principal Deputy Assistant Secretary Tracy Mustin and EM Consolidated Business Center Director Jack Craig visited the Moab Project sites in Utah on March 12. After touring the Moab site to see the uranium mill tailings removal operations and groundwater remediation well field, Mustin and Craig met with employees. "It was really great to meet with the employees and to see the important work they are carrying out safely and efficiently every day. The commitment of the federal and contractor team to getting the job done right is clear," Mustin said. In this photo, Mustin is tenth from right and Craig is ninth from right in the front row. The mill tailings are

33

Moab Marks 6-Million-Ton Cleanup Milestone | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Marks 6-Million-Ton Cleanup Milestone Moab Marks 6-Million-Ton Cleanup Milestone Moab Marks 6-Million-Ton Cleanup Milestone June 20, 2013 - 12:00pm Addthis At Tuesday's Grand County Council meeting in Utah, Moab Federal Project Director Donald Metzler, center, moves a piece from a plaque representing Moab’s uranium mill tailings pile to a plaque representing the disposal cell in recognition of the site achieving a milestone by shipping 6 million tons of the tailings. Grand County Council Chair Gene Ciarus is on the left and Grand County Council Vice Chair Lynn Jackson is on the right. At Tuesday's Grand County Council meeting in Utah, Moab Federal Project Director Donald Metzler, center, moves a piece from a plaque representing Moab's uranium mill tailings pile to a plaque representing the disposal

34

DOE Issues Final Environmental Impact Statement for Moab, Utah Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Impact Statement for Moab, Utah Site Environmental Impact Statement for Moab, Utah Site DOE Issues Final Environmental Impact Statement for Moab, Utah Site July 25, 2005 - 2:27pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today issued its final environmental impact statement (EIS) for the Moab Uranium Mill Tailings Remedial Action Project Site, located on the bank of the Colorado River. The EIS details the preferred option of removal of the tailings pile and contaminated materials, along with ground water remediation. The tailings will be moved, predominately by rail, to the proposed Crescent Junction, Utah, site, more than 30 miles from the Colorado River. "Taking all facts into account, we believe the recommendations issued today provide the best solution to cleaning up Moab and protecting the River,"

35

SUBAQUEOUS DISPOSAL OF MILL TAILINGS  

SciTech Connect

A study of mill tailings and sulfide minerals was carried out in order to understand their behavior under subaqueous conditions. A series of electrochemical experiments, namely, cyclic voltammetry, electrochemical impedance spectroscopy and galvanic coupling tests were carried out in artificial seawater and in pH 6.8 buffer solutions with chloride and ferric salts. Two mill tailings samples, one from the Kensington Mine, Alaska, and the other from the Holden Mine, Washington, were studied along with pyrite, galena, chalcopyrite and copper-activated sphalerite. SEM analysis of mill tailings revealed absence of sulfide minerals from the Kensington Mine mill tailings, whereas the Holden Mine mill tailings contained approximately 8% pyrite and 1% sphalerite. In order to conduct electrochemical tests, carbon matrix composite (CMC) electrodes of mill tailings, pyrite and galena were prepared and their feasibility was established by conducting a series of cyclic voltammetry tests. The cyclic voltammetry experiments carried out in artificial seawater and pH 6.8 buffer with chloride salts showed that chloride ions play an important role in the redox processes of sulfide minerals. For pyrite and galena, peaks were observed for the formation of chloride complexes, whereas pitting behavior was observed for the CMC electrodes of the Kensington Mine mill tailings. The electrochemical impedance spectroscopy conducted in artificial seawater provided with the Nyquist plots of pyrite and galena. The Nyquist plots of pyrite and galena exhibited an inert range of potential indicating a slower rate of leaching of sulfide minerals in marine environments. The galvanic coupling experiments were carried out to study the oxidation of sulfide minerals in the absence of oxygen. It was shown that in the absence of oxygen, ferric (Fe3+) ions might oxidize the sulfide minerals, thereby releasing undesirable oxidation products in the marine environment. The source of Fe{sup 3{minus}} ions may be attributed to iron-bearing sulfide (and oxide) minerals present in the mill tailings. However, the concentration of available Fe{sup 3{minus}} ions can be reduced by the precipitation of insoluble ferric hydroxides (Fe(OH ){sub 3}) by seawater due to its near neutral pH. In such case, the oxidation of a sulfide mineral is inhibited due to the absence of an oxidizing agent (viz. oxygen and/or Fe{sup 3+} ions). The experiments carried out in this study provided a better understanding of behavior of sulfide minerals and mill tailings in subaqueous conditions and may be useful for further investigation of sulfide minerals and mill tailings in other environments.

Neeraj K. Mendiratta; Roe-Hoan Yoon; Paul Richardson

1999-09-03T23:59:59.000Z

36

Moab Project Offers Unique Educational Resource in Site Tours | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Offers Unique Educational Resource in Site Tours Project Offers Unique Educational Resource in Site Tours Moab Project Offers Unique Educational Resource in Site Tours May 2, 2013 - 12:00pm Addthis Students from the University of Utah contemplate the hillside geology at the rail load out area while Moab Federal Project Director Donald Metzler (in orange vest) addresses a question. The uranium mill tailings pile is behind and below the viewing area. Students from the University of Utah contemplate the hillside geology at the rail load out area while Moab Federal Project Director Donald Metzler (in orange vest) addresses a question. The uranium mill tailings pile is behind and below the viewing area. As Durham University students stand on the bank of the Colorado River, Moab Groundwater Manager Ken Pill (in yellow vest at left) explains how the groundwater interim action system operates. A well vault is in the foreground.

37

URANIUM MILL TAILINGS RADON FLUX CALCULATIONS  

E-Print Network (OSTI)

at the Piñon Ridge Property in western Montrose County, Colorado. The Piñon Ridge Mill includesURANIUM MILL TAILINGS RADON FLUX CALCULATIONS PI?ON RIDGE PROJECT MONTROSE COUNTY, COLORADO Submitted To: Energy Fuels Resources Corporation 44 Union Boulevard, Suite 600 Lakewood, Colorado 80228

38

Engineering assessment of inactive uranium mill tailings  

SciTech Connect

The Grand Junction site has been reevaluated in order to revise the October 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Grand Junction, Colorado. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.9 million tons of tailings at the Grand Junction site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The eight alternative actions presented herein range from millsite and off-site decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through VIII). Cost estimates for the eight options range from about $10,200,000 for stabilization in-place to about $39,500,000 for disposal in the DeBeque area, at a distance of about 35 mi, using transportation by rail. If transportation to DeBeque were by truck, the cost estimated to be about $41,900,000. Three principal alternatives for the reprocessing of the Grand Junction tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $200/lb by heap leach and $150/lb by conventional plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery appears not to be economically attractive.

Not Available

1981-07-01T23:59:59.000Z

39

Moab Project Exceeds 5 Years of Operations Without Lost-Time Injury, Illness  

Energy.gov (U.S. Department of Energy (DOE))

GRAND JUNCTION, Colo. It has been more than five years since workers on the Moab Uranium Mill Tailings Remedial Action Project in Utah had a lost-time injury or illness. This represents roughly 2.2 million hours of safe work.

40

Uranium mill tailings neutralization: contaminant complexation and tailings leaching studies  

SciTech Connect

Laboratory experiments were performed to compare the effectiveness of limestone (CaCO/sub 3/) and hydrated lime (Ca(OH)/sub 2/) for improving waste water quality through the neutralization of acidic uranium mill tailings liquor. The experiments were designed to also assess the effects of three proposed mechanisms - carbonate complexation, elevated pH, and colloidal particle adsorption - on the solubility of toxic contaminants found in a typical uranium mill waste solution. Of special interest were the effects each of these possible mechanisms had on the solution concentrations of trace metals such as Cd, Co, Mo, Zn, and U after neutralization. Results indicated that the neutralization of acidic tailings to a pH of 7.3 using hydrated lime provided the highest overall waste water quality. Both the presence of a carbonate source or elevating solution pH beyond pH = 7.3 resulted in a lowering of previously achieved water quality, while adsorption of contaminants onto colloidal particles was not found to affect the solution concentration of any constituent investigated. 24 refs., 8 figs., 19 tabs.

Opitz, B.E.; Dodson, M.E.; Serne, R.J.

1985-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

EIS-0198: Uranium Mill Tailings Remedial Action Groundwater Project |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

198: Uranium Mill Tailings Remedial Action Groundwater Project 198: Uranium Mill Tailings Remedial Action Groundwater Project EIS-0198: Uranium Mill Tailings Remedial Action Groundwater Project SUMMARY This EIS assesses the potential programmatic impacts of conducting the Ground Water Project, provides a method for determining the site-specific ground water compliance strategies, and provides data and information that can be used to prepare site-specific environmental impacts analyses more efficiently. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD April 28, 1997 EIS-0198: Record of Decision Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project (April 1997) December 1, 1996 EIS-0198: Programmatic Environmental Impact Statement Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project

42

DOE/EA-1155 Uranium Mill Tailing Remedial Action Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

55 55 Uranium Mill Tailing Remedial Action Project Environmental Assessment of Ground- Water Compliance Activities At the Uranium Mill Tailings Site Spook, Wyoming February 1997 Prepared by U.S. Department of Energy Albuquerque Operations Office Grand Junction Office This page intentionally blank : illegible Portions of tbis DISCLAIMER document may be in electronic image products. Images are produced fiom the best available original dOClMXlf?IlL DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, express or implied, or assumes any legal liabili- ty or responsibility for the accuracy, completeness,

43

Uranium mill tailings remedial action project real estate management plan  

SciTech Connect

This plan summarizes the real estate requirements of the US Department of Energy`s (DOE) Uranium Mill Tailings Action (UMTRA) Project, identifies the roles and responsibilities of project participants involved in real estate activities, and describes the approaches used for completing these requirements. This document is intended to serve as a practical guide for all project participants. It is intended to be consistent with all formal agreements, but if a conflict is identified, the formal agreements will take precedence.

Not Available

1994-09-01T23:59:59.000Z

44

Radon attenuation handbook for uranium mill tailings cover design  

SciTech Connect

This handbook has been prepared to facilitate the design of earthen covers to control radon emission from uranium mill tailings. Radon emissions from bare and covered uranium mill tailings can be estimated from equations based on diffusion theory. Basic equations are presented for calculating surface radon fluxes from covered tailings, or alternately, the cover thicknesses required to satisfy a given radon flux criterion. Also described is a computer code, RAECOM, for calculating cover thicknesses and surface fluxes. Methods are also described for measuring diffusion coefficients for radon, or for estimating them from empirical correlations. Since long-term soil moisture content is a critical parameter in determining the value of the diffusion coefficient, methods are given for estimating the long-term moisture contents of soils. The effects of cover defects or advection are also discussed and guidelines are given for determining if they are significant. For most practical cases, advection and cover defect effects on radon flux can be neglected. Several examples are given to demonstrate cover design calculations, and an extensive list of references is included. 63 references, 18 figures, 6 tables.

Rogers, V.C.; Nielson, K.K.; Kalkwarf, D.R.

1984-04-01T23:59:59.000Z

45

E-Print Network 3.0 - armoring uranium-mill tailings Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Donahue R, Hendry MJ, Landine P (2000b) Geochemistry of arsenic and nickel in uranium mill tailings... , Mahoney J, MacDonald A, Rowson J (1999) ... Source: Pichler,...

46

EA-1155: Ground-water Compliance Activities at the Uranium Mill Tailings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: Ground-water Compliance Activities at the Uranium Mill 5: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook, Wyoming EA-1155: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook, Wyoming SUMMARY This EA evaluates the environmental impacts for the proposal to comply with the Environmental Protection Agency's ground-water standards set forth in 40 CFR 192 at the Spook, Wyoming Uranium Mill Tailings Site by using the selected alternative stated in the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water Project. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD March 1, 1997 EA-1155: Final Environmental Assessment Ground-water Compliance Activities at the Uranium Mill Tailings Site,

47

Process for Transition of Uranium Mill Tailings Radiation Control Act Title  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Uranium Mill Tailings Radiation Control Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance (March 2012) Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance (March 2012)

48

Monticello Mill Tailings Site Operable Unit Ill Interim Remedial Action  

Office of Legacy Management (LM)

Site Site Operable Unit Ill Interim Remedial Action Mark Perfxmed Under DOE Contrici No. DE-AC13-96CJ873.35 for th3 U.S. De[:ar!menf of Energy app~oveJioi'ptiL#ic re1ease;dCinWlionis Unlimilra' This page intentionally left blank Monticello Mill Tailings Site Operable Unit I11 Interim Remedial Action Annual Status Report August 1999 Prepared for U.S. Department of Energy Albuquerque Operations Office Grand Junction Office Project Number MSG-035-0011-00-000 Document Number Q0017700 Work Performed Under DOE Contract Number DE-AC13-96GJ87335 Task Order Number MAC99-03 This page intentionally blank Document Number Q0017700 Acronyms Contents Page ACRONYMS .............................................................................................................................. V

49

Monticello Mill Tailings Site Operable Unit III Ecological Risk  

Office of Legacy Management (LM)

Monticello Monticello Mill Tailings Site Operable Unit III Ecological Risk Assessment September 1998 Prepared by U.S. Department of Energy Grand JunctionOffice Grand Junction, Colorado Project Number MSG-035-0004-00-000 Document Number Q0002l 00 Work Performed Under DOE Contract Number DE-AC13-96GJ87335 Task Order Number MAC98-03 This page intentionally blank , ** 1 ( ( Document Number Q00021 00 Contents Contents Page Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. ix Executive Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. xi 1.0 Introduction I-I 2.0 Problem Formulation : 2-1 2.1 Site Description 2-1 2.1.1 Physical Setting 2-1 2.1.2 Ecological Setting '.' 2-5 2.2 Ecological Contaminants of Concern 2-9 2.3 Contaminant Fate and Transport, Ecosystems Potentially at Risk, and Complete Exposure Pathways 2-11 i3.1

50

Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendum1  

Office of Legacy Management (LM)

Monticello Mill Tailings Site Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendum1 Focused Feasibility Study January 2004 Prepared by U.S. Department of Energy Grand Junction, Colorado Work performed under DOE Contract No. DE-AC1342GJ79491 DOE Task Order No. ST03-205 Document N u m b e r Q0029500 S i g t ~ a t u r e Page Signature Page Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendud Focused Feasibility Study January 2004 Submitted By: Arthur W. Kleinrath, Project Manager U.S. Department of Energy, Grand Junction, Colorado U.S. Department of Energyat Gmnd Junction MMTS OU 111 Remedial Investigation AddendutdFocuscd Feasibilily Study January 2004 Final iii This page intentionally left blank Document Number Q0029500 Contents U.S. Department of Energy at Grand Junction MMTS OU III Remedial Investigation Addendum/Focused Feasibility Study

51

Assessment of the radiological impact of the inactive uranium-mill tailings at Mexican Hat, Utah  

SciTech Connect

High surface soil concentrations of /sup 226/Ra and high above-ground measurements of gamma-ray intensity in the vicinity of the inactive uranium-mill tailings at Mexican Hat show both wind and water erosion of the tailings. The former mill area, occupied by a trade school at the time of this survey, shows a comparatively high level of contamination, probably from unprocessed ore on the surface of the ore storage area near the location of the former mill buildings. However, the estimated health effect of exposure to gamma rays during a 2000-hr work year in the area represents an increase of 0.1% in the risk of death from cancer. Exposure of less than 600 persons within 1.6 km of the tailings to radon daughters results in an estimated 0.2%/year increase in risk of lung cancer.

Haywood, F.F.; Goldsmith, W.A.; Ellis, B.S.; Hubbard, H.M. Jr.; Fox, W.F.; Shinpaugh, W.H.

1980-03-01T23:59:59.000Z

52

Environmental assessment of remedial action at the Gunnison Uranium Mill Tailings Site, Gunnison, Colorado. [UMTRA Project  

SciTech Connect

This document assesses and compares the environmental impacts of various alternatives for remedial action at the Gunnison uranium of mill tailings site located 0.5 miles south of Gunnison, Colorado. The site covers 56 acres and contains 35 acres of tailings, 2 of the original mill buildings and a water tower. The Uranium Mill Tailings Radiation Control of Act of 1978 (UMTRCA), Public Law 95-604, authorizes the US Department of Energy to clean up the site to reduce the potential health impacts associated with the residual radioactive materials remaining at the site and at associated (vicinity) properties off the site. The US Environmental Protection Agency promulgated standards for the remedial actions (40 CFR 192). Remedial actions must be performed in accordance with these standards and with the occurrence of the Nuclear Regulatory Commission. Four alternatives have been addressed in this document. The first alternative is to consolidate the tailings and associated contaminated soils into a recontoured pile on the southern portion of the existing site. A radon barrier of silty clay would be constructed over the pile and various erosion control measures would be taken to assure the long-term integrity of the pile. Two other alternatives which involve moving the tailings to new locations are assessed in this document. These alternatives generally involve greater short-term impacts and are more costly but would result in the tailings being stabilized in a location farther from the city of Gunnison. The no action alternative is also assessed.

Bachrach, A.; Hoopes, J.; Morycz, D. (Jacobs Engineering Group, Inc., Pasadena, CA (USA)); Bone, M.; Cox, S.; Jones, D.; Lechel, D.; Meyer, C.; Nelson, M.; Peel, R.; Portillo, R.; Rogers, L.; Taber, B.; Zelle, P. (Weston (Roy F.), Inc., Washington, DC (USA)); Rice, G. (Sergent, Hauskins and Beckwith (USA))

1984-12-01T23:59:59.000Z

53

Engineering assessment of inactive uranium mill tailings: Maybell Site, Maybell, Colorado  

SciTech Connect

Ford, Bacon and Davis Utah Inc. has reevaluated the Maybell site in order to revise the October 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Maybell, Colorado. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 2.6 million dry tons of tailings at the Maybell site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The two alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material (Option I), to disposal of the tailings in a nearby open pit mine and decontamination of the tailings site (Option II). Cost estimates for the two options are about $11,700,000 for stabilization in-place and about $22,700,000 for disposal within a distance of 2 mi. Three principal alternatives for the reprocessing of the Maybell tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $125 and $165/lb of U/sub 3/O/sub 8/ by heap leach and conventional plant processes, respectively. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery is not economically attractive at present.

none,

1981-09-01T23:59:59.000Z

54

Engineering assessment of inactive uranium mill tailings, Shiprock site, Shiprock, New Mexico  

SciTech Connect

Ford, Bacon and Davis Utah Inc. has reevaluated the Shiprock site in order to revise the March 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Shiprock, New Mexico. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.5 million dry tons of tailings at the Shiprock site constitutes the most significant environental impact, although windblown tailings and external gamma radiation also are factors. The eight alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through VIII). Cost estimates for the eight options range from about $13,400,000 for stabilization in place to about $37,900,000 for disposal at a distance of about 16 miles. Three principal alternatives for the reprocessing of the Shiprock tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $230/lb by heap leach and $250/lb by conventional plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery is not economically attractive.

Not Available

1981-07-01T23:59:59.000Z

55

Engineering assessment of inactive uranium mill tailings: Slick Rock sites, Slick Rock, Colorado  

SciTech Connect

Ford, Bacon and Davis Utah, Inc., has reevaluated the Slick Rock sites in order to revise the October 1977 engineering radioactive uranium mill tailings at Slick Rock, Colorado. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 387,000 tons of tailings at the Slick Rock sites constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The five alternative actions presented in this engineering assessment include millsite decontamination with the addition of 3 m of stabilization cover material, consolidation of the piles, and removal of the tailings to remote disposal sites and decontamination of the tailings sites. Cost estimates for the five options range from about $6,800,000 for stabilization in-place, to about $11,000,000 for disposal at a distance of about 6.5 mi. Three principal alternatives for the reprocessing of the Slick Rock tailings were examined: heap leaching; treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be over $800/lb of U/sub 3/O/sub 8/ whether by conventional or heap leach plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery is not economically attractive at present, nor for the foreseeable future.

none,

1981-09-01T23:59:59.000Z

56

Engineering assessment of inactive uranium mill tailings: Phillips/United Nuclear site, Ambrosia Lake, New Mexico  

SciTech Connect

Ford, Bacon and Davis Utah, Inc., has reevaluated the Phillips/United Nuclear site in order to revise the December 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Ambrosia Lake, New Mexico. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from 2.6 million dry tons of tailings at the Phillips/United Nuclear site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material, to removal of the tailings to remote disposal sites and decontamination of the tailings site. Cost estimates for the four options range from about $21,500,000 for stabilization in-place, to about $45,200,000 for disposal at a distance of about 15 mi. Three principal alternatives for the reprocessing of the Phillips/United Nuclear tailings were examined: heap leaching; treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing.The cost of the uranium recovered would be about $87/lb of U/sub 3/O/sub 8/ by either heap leach or conventional plant process. The spot market price for uranium was $25/lb early in 1981. Reprocessing the Phillips/United Nuclear tailings for uranium recovery does not appear to be economically attractive under present or foreseeable market conditions.

none,

1981-10-01T23:59:59.000Z

57

Asphalt emulsion sealing of uranium mill tailings. 1980 annual report  

SciTech Connect

Studies of asphalt emulsion sealants conducted by the Pacific Northwest Laboratory have demonstrated that the sealants are effective in containing radon and other potentially hazardous material within uranium tailings. The laboratory and field studies have further demonstrated that radon exhalation from uranium tailings piles can be reduced by greater than 99% to near background levels. Field tests at the tailings pile in Grand Junction, Colorado, confirmed that an 8-cm admix seal containing 22 wt% asphalt could be effectively applied with a cold-mix paver. Other techniques were successfully tested, including a soil stabilizer and a hot, rubberized asphalt seal that was applied with a distributor truck. After the seals were applied and compacted, overburden was applied over the seal to protect the seal from ultraviolet degradation.

Hartley, J.N.; Koehmstedt, P.L; Esterl, D.J.; Freeman, H.D.; Buelt, J.L.; Nelson, D.A.; Elmore, M.R.

1981-05-01T23:59:59.000Z

58

Engineering assessment of inactive uranium mill tailings, Green River Site, Green River, Utah  

SciTech Connect

Ford, Bacon and Davis Utah Inc. has reevaluated the Green River site in order to revise the December 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Green River, Utah. This evaluation has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative remedial actions. Radon gas released from the 123,000 tons of tailings at the Green River site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors.

none,

1981-08-01T23:59:59.000Z

59

The U.S. regulatory framework for long-term management of uranium mill tailings  

SciTech Connect

The US established the regulatory structure for the management, disposal, and long-term care of uranium mill tailings in 1978 with the passage of the Uranium Mill Tailings Radiation Control Act (UMTRCA) (Pub. L. 95-604). This legislation has governed the cleanup and disposal of uranium tailings at both inactive and active sites. The passage of the UMTRCA established a federal regulatory program for the cleanup and disposal of uranium mill tailings in the US. This program involves the DOE, the NRC, the EPA, various states and tribal governments, private licensees, and the general public. The DOE has completed surface remediation at 14 sites, with the remaining sites either under construction or in planning. The DOE`s UMTRA Project has been very successful in dealing with public and agency demands, particularly regarding disposal site selection and transportation issues. The active sites are also being cleaned up, but at a slower pace than the inactive sites, with the first site tentatively scheduled for completion in 1996.

Smythe, C. [Dept. of Energy, Albuquerque, NM (United States); Bierley, D.; Bradshaw, M. [Roy F. Weston, Inc., Albuquerque, NM (United States)

1995-03-01T23:59:59.000Z

60

Engineering assessment of inactive uranium mill tailings: Lakeview site, Lakeview, Oregon  

SciTech Connect

This assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The three alternative actions presented in this engineering assessment include millsite decontamination with the addition of 3 m of stabilization cover material (Option I) and removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II and III). Cost estimates range from about $6,000,000 for stabilization in-place, to about $7,500,000 for disposal at a distance of about 10 miles. Three alternatives for reprocessing the Lakeview tailings were examined: heap leaching, treatment at an existing mill, and reprocessing at a new conventional mill. The cost of the uranium recovered would be over $450/lb of U/sub 3/O/sub 8/ and hence reprocessing is not economical.

none,

1981-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Summary of the engineering assessment of inactive uranium-mill tailings: Canonsburg Site, Canonsburg, Pennsylvania  

SciTech Connect

Ford, Bacon and Davis Utah Inc. has evaluated the Canonsburg site in order to assess the problems resulting from the existence of radioactive residues at Canonsburg, Pennsylvania. This engineering assessment has included the preparation of topographic maps, radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative remedial actions. Radon gas released from the approximately 300,000 tons of tailings and contaminated soil at the Canonsburg site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite and off-site decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings and contaminated materials to a remote disposal site and decontamination of the Canonsburg site (Options II through IV). Cost estimates for the four options range from $23,244,000 for stabilization in-place, to $27,052,000 for disposal at a distance of about 17 mi. Three principal alternatives for the reprocessing of the Canonsburg tailings were examined: heap leaching; treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing. As required by Public Law 95-604, under whose auspices this project is conducted, the US Department of Energy has solicited expressions of interest in reprocessing the tailings and residues at the Canonsburg site for uranium recovery. Since no such interest was demonstrated, no effort has been made to estimate the value of the residual uranium resource at the Canonsburg site.

Not Available

1982-04-01T23:59:59.000Z

62

Baseline risk assessment of ground water contamination at the Uranium Mill Tailings Site near Riverton, Wyoming  

SciTech Connect

This Risk Assessment evaluated potential impacts to public health or the environment caused by ground water contamination at the former uranium mill processing site. In the first phase of the U.S. Department of Energy`s Uranium Mill Tailings Remedial Action (UMTRA) Project, the tailing and other contaminated material at this site were placed in a disposal cell near the Gas Hills Plant in 1990. The second phase of the UMTRA Project is to evaluate ground water contamination. This risk assessment is the first site-specific document to evaluate potential health and environmental risks for the Riverton site under the Ground Water Project; it will help determine whether remedial actions are needed for contaminated ground water at the site.

Not Available

1994-09-01T23:59:59.000Z

63

Scoping session of the programmatic environmental impact statement for the Uranium Mill Tailings Remedial Action Project  

SciTech Connect

This document is about the scoping session which was held at the Community Center in Falls City, Texas. The purpose was to obtain public comment on the Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Project (UMTRA), specifically on the ground water project. Presentations made by the manager for the entire UMTRA program, manager of the site and ground water program, comments made by two residents of Fall City are included in this document.

none,

1992-12-31T23:59:59.000Z

64

Radiological survey of the inactive uranium-mill tailings at Rifle, Colorado  

SciTech Connect

Results of radiological surveys of two inactive uranium-mill sites near Rifle, Colorado, in May 1976 are presented. These sites are referred to as Old Rifle and New Rifle. The calculated /sup 226/Ra inventory of the latter site is much higher than at the older mill location. Data on above-ground measurements of gamma exposure rates, surface and near-surface concentration of /sup 226/Ra in soil and sediment samples, concentration of /sup 226/Ra in water, calculated subsurface distribution of /sup 226/Ra, and particulate radionuclide concentrations in air samples are given. The data serve to define the extent of contamination in the vicinity of the mill sites and their immediate surrounding areas with tailings particles. Results of these measurements were utilized as technical input for an engineering assessment of these two sites.

Haywood, F.F.; Jacobs, D.J.; Ellis, B.S.; Hubbard, H.M. Jr.; Shinpaugh, W.H.

1980-06-01T23:59:59.000Z

65

Radiological survey of the inactive uranium-mill tailings at Durango, Colorado  

SciTech Connect

Results of a radiological survey of the inactive uranium-mill site at Durango, Colorado, conducted in April 1976, in cooperation with a team from Ford, Bacon and Davis Utah Inc., are presented together with descriptions of the instruments and techniques used to obtain the data. Direct above-ground gamma measurements and analysis of surface soil and sediment samples indicate movement of tailings from the piles toward Lightner Creek on the north and the Animas River on the east side of the piles. The concentration of /sup 226/Ra in the former raffinate pond area is only slightly above the background level. Two structures in Durango were found to contain high concentrations of airborne radon daughters, where tailings are known to have been utilized in construction. Near-background concentrations of radon daughters were found in a well-ventilated building close to the tailings.

Haywood, F.F.; Perdue, P.T.; Shinpaugh, W.H.; Ellis, B.S.; Chou, K.D.

1980-03-01T23:59:59.000Z

66

The influence of fractal size distribution of covers on radon exhalation from uranium mill tailings  

Science Journals Connector (OSTI)

Tailings produced during mining and milling of uranium ores represent potentially large volumes of low level radioactive materials. A typical environmental problem associated with mill tailings is radon emanation. Covering tailings is widely applied to reduce radon exhalation rate. In this paper, the fractal theories and field covering tests are used to study the fractal characters of size distribution of six types of covering materials, including waste rock, sand, laterite, kaolin, mixture of sand and laterite, and mixture of waste rock and laterite, and their influences on radon exhalation. The size distributions of uranium tailings and the six aforementioned covering materials all exhibit a good fractal structure. The contents of fine grain increase with the increasing value of fractal dimension. The results of field radon measurement show that the radon emanation rate of tailings without covers is 14.718.6Bq/m2s. Covering tests were carried out of the six abovementioned covering materials with thickness of 0.4m, 0.8m, 1.2m, 1.6m and 2.0m. The results indicate that the application of these materials for cover layers can decrease the radon exhalation rate markedly. The effectiveness of a cover layer in reducing radon exhalation is related to its fractal texture of size distribution. Under the same thickness conditions, the attenuation coefficient of radon exhalation rate increases with the increasing fractal dimension of size distribution of covers. The empirical expressions of the attenuation coefficients in relation to fractal dimension D of size distribution and thickness x of covers is obtained for evaluating the effectiveness of final covers for uranium tailings impoundments.

Kaixuan Tan; Zehua Liu; Liangshu Xia; Junwen Lv; Hanqiao Hu

2012-01-01T23:59:59.000Z

67

Laboratory measurements of contaminant attenuation of uranium mill tailings leachates by sediments and clay liners  

SciTech Connect

We discuss FY82 progress on the development of laboratory tools to aid in the prediction of migration potential of contaminants present in acidic uranium mill tailings leachate. Further, empirical data on trace metal and radionuclide migration through a clay liner are presented. Acidic uranium mill tailings solution from a Wyoming mill was percolated through a composite sediment called Morton Ranch Clay liner. These laboratory columns and subsequent sediment extraction data show: (1) As, Cr, Pb, Ag, Th and V migrate very slowly; (2) U, Cd, Ni, Zn, Fe, Mn and similar transition metals are initially immobilized during acid neutralization but later are remobilized as the tailings solution exhausts the clay liner's acid buffering capacity. Such metals remain immobilized as long as the effluent pH remains above a pH value of 4 to 4.5, but they become mobile once the effluent pH drops below this range; and (3) fractions of the Se and Mo present in the influent tailings solution are very mobile. Possible controlling mechanisms for the pH-dependent immobilization-mobilization of the trace metals are discussed. More study is required to understand the controlling mechanisms for Se and Mo and Ra for which data were not successfully collected. Using several column lengths (from 4.5 to 65 cm) and pore volume residence times (from 0.8 to 40 days) we found no significant differences in contaminant migration rates or types and extent of controlling processes. Thus, we conclude that the laboratory results may be capable of extrapolation to actual disposal site conditions.

Serne, R.J.; Peterson, S.R.; Gee, G.W.

1983-04-01T23:59:59.000Z

68

DOE Moab Site Cost-Effectively Eliminates 200 Million Gallons of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Site Cost-Effectively Eliminates 200 Million Gallons of Moab Site Cost-Effectively Eliminates 200 Million Gallons of Contaminated Ground Water DOE Moab Site Cost-Effectively Eliminates 200 Million Gallons of Contaminated Ground Water July 29, 2013 - 12:00pm Addthis View of the evaporation pond (right center) on the tailings pile with the forced-air evaporators running. The extraction wells are between the pile and the Colorado River, which can be seen in the lower left. View of the evaporation pond (right center) on the tailings pile with the forced-air evaporators running. The extraction wells are between the pile and the Colorado River, which can be seen in the lower left. Media Contacts Donald Metzler, donald.metzler@gjem.doe.gov (970) 257-2115 Wendee Ryan, wryan@gjemtac.doe.gov (970) 257-2145 Grand Junction, CO - The Department of Energy (DOE) announced today that

69

Using alternative chemicals in the flotation of heavy metals from lead mill tailings  

SciTech Connect

The U.S. Bureau of Mines (USBM) investigated alternative chemicals for the flotation of heavy metal values from southeast Missouri lead mill tailings. The objectives of the study were to lower the Pb remaining in the reprocessed tailings to <500 ppm, concentrate the metal values, and lower the overall toxicity of the flotation reagent scheme. Due to the high toxicity of classic flotation chemicals, collectorless flotation, as well as nontoxic or less-toxic chemicals, was studied for use in the flotation process. The investigation centered on the National tailings pile in Flat River, MO. Advantages to using alternative chemicals for the flotation process are presented. Novel reagent schemes are discussed for the treatment of the tailings. Various nontoxic or less-toxic oils were tested, and a substitute for sodium sulfide was investigated. Using a food additive oil, soda ash, and a frother as the reagent scheme, froth flotation recovered 89% of the Pb values. Further scavenging lowered the Pb remaining in the reprocessed tailings to <500 ppm. A less-toxic substitute for sodium cyanide was also studied for use in the cleaner flotation stages. Preliminary results indicate that the food additive oil, canola oil, to be as effective as classic sulfide flotation reagents.

Benn, F.W. [Bureau of Mines, Rolla, MO (United States)

1995-04-01T23:59:59.000Z

70

Notice of Availability of the Moab Uranium Mill Tailings Remediation Draft Environmental Impact Statement (DOE/EIS-0355) (11/12/04)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

27 27 Federal Register / Vol. 69, No. 218 / Friday, November 12, 2004 / Notices Pursuant to 40 CFR 1506.9. EIS No. 040512, Draft EIS, BLM, ID, Fire, Fuels and Related Vegetation Management Direction Plan Amendment, Upper Snake River District (The District), Amending 12 Existing Land Use Plans, Several Counties, ID, Comment Period Ends: February 10, 2005, Contact: Eric Limbach (208) 478-6392. EIS No. 040513, Final EIS, BLM, CA, King Range National Conservation Area (KRNCA) Resource Management Plan, Implementation, Humboldt and Mendocino Counties, CA, Wait Period Ends: December 13, 2004, Contact: Lynda J. Roush (707) 825-2300. EIS No. 040514, Final EIS, AFS, AK, Resurrection Creek Stream and Riparian Restoration Project, Proposes to Accelerate the Recovery of Riparian

71

Record of Decision for the Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, UT (DOE/EIS-0355) (09/21/05)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

58 Federal Register 58 Federal Register / Vol. 70, No. 182 / Wednesday, September 21, 2005 / Notices assistive listening devices, materials in alternative format) should notify Bernard Garcia at 202-260-1454 by September 29, 2005. We will attempt to meet requests after this date, but cannot guarantee availability of the requested accommodation. The meeting site is accessible to individuals with disabilities. Records are kept of all Council proceedings and are available for public inspection at the Office of Indian Education, United States Department of Education, Room 5C141, 400 Maryland Avenue, SW., Washington, DC 20202. Henry L. Johnson, Assistant Secretary for Elementary and Secondary Education. [FR Doc. 05-18858 Filed 9-20-05; 8:45 am] BILLING CODE 4000-01-M DEPARTMENT OF EDUCATION

72

Amended Record of Decision for the Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, UT (DOE/EIS-0355) (02/29/08)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 Federal Register 3 Federal Register / Vol. 73, No. 41 / Friday, February 29, 2008 / Notices 6:45 p.m. Presentation. 7 p.m. Public Comments. 7:15 p.m. Administrative Issues * Motions. * Review of Work Plan. * Review Next Agenda. 8 p.m. Final Comments. 8:15 p.m. Adjourn. Breaks taken as Appropriate. Public Participation: The meeting is open to the public. Written statements may be filed with the Board either before or after the meeting. Individuals who wish to make oral statements pertaining to agenda items should contact Reinhard Knerr at the address or telephone number listed above. Requests must be received five days prior to the meeting and reasonable provision will be made to include the presentation in the agenda. The Deputy Designated Federal Officer is empowered to conduct the meeting in a

73

Radioecological investigations of uranium mill tailings systems. Progress report, September 1, 1979-September 30, 1980  

SciTech Connect

The initial 13 months of this program have been devoted to staffing, development of a radiochemistry capability, development of a mill tailings reclamation study, studies on hydraulic properties of soils, initiation of plant uptake studies, preparation for metabolic studies with deer and antelope, and sample collections. Through the addition of new personnel and equipment, we are rapidly developing analytical capabilities for /sup 238/U, /sup 230/Th, /sup 226/Ra, /sup 210/Pb and /sup 210/Po in matrices such as soil, water, plant material, and animal tissues. A 4 acre study site was developed in cooperation with the Pathfinder Mines Corp. at the Shirley Basin Uranium Mine in Wyoming. The study site is designed for investigations on the influence of various kinds and thicknesses of mill tailings soil covers on the integrity of reclaimed tailings and inherent radionuclides. Studies on the hydraulic properties of various soil materials were conducted and data analysis is in progress. Plots and procedures for conducting plant uptake studies on uranium and progeny were established and long-term investigations have been initiated. A colony of tame mule deer and pronghorn antelope has been developed for studies on the uptake and retention of /sup 210/Pb and /sup 210/Po. Numerous collections of soil, vegetation and water from the Shirley Basin Uranium Mine environs were conducted and radiochemical assay is in progress.

Whicker, F W

1980-10-10T23:59:59.000Z

74

Baseline risk assessment for groundwater contamination at the uranium mill tailings site near Monument Valley, Arizona. Draft  

SciTech Connect

This baseline risk assessment evaluates potential impact to public health or the environment resulting from groundwater contamination at the former uranium mill processing site near Monument Valley, Arizona. The tailings and other contaminated material at this site are being relocated and stabilized in a disposal cell at Mexican Hat, Utah, through the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project. The tailings removal is planned for completion by spring 1994. After the tailings are removed, groundwater contamination at the site will continue to be evaluated. This risk assessment is the first document specific to this site for the Groundwater Project. It will be used to assist in determining what remedial action is needed for contaminated groundwater at the site.

Not Available

1993-09-01T23:59:59.000Z

75

Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Annual Site Inspection and Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites November 2012 LMS/S09415 ENERGY Legacy Management U.S. DEPARTMENT OF Sherwood, Washington, Disposal Site, 2012 Sherwood, Washington, Disposal Site, 2012 L-Bar, New Mexico, Disposal Site, 2012 L-Bar, New Mexico, Disposal Site, 2012 Bluewater, New Mexico, Disposal Site, 2012 Bluewater, New Mexico, Disposal Site, 2012 Maybell West, Colorado, Disposal Site, 2012 Maybell West, Colorado, Disposal Site, 2012 This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy,

76

BASELINE RISK ASSESSMENT OF GROUND WATER CONTAMINATION AT THE URAN~UM MILL TAILINGS  

Office of Legacy Management (LM)

I~:-:ii*.i: i,<;.;.-;_r- --:-:ir-- I~:-:ii*.i: i,<;.;.-;_r- --:-:ir-- - . . - -. . - . . - , -, . , , , - - - - . BASELINE RISK ASSESSMENT OF GROUND WATER CONTAMINATION AT THE URAN~UM MILL TAILINGS SITE NEAR RIVERTON, WYOMING I i I I I Prepared by the U.S. Department of Energy Albuquerque, New Mexico September 1995 INTENDED FOR PUBLIC RELEASE This report has been reproduced from the best available copy. Avai and microfiche Number of pages in this report: 166 DOE and DOE contractors can obtain copies of this report from: Office of Scientific and Technical information P.O. Box 62 Oak Ridge, TN 37831 (61 5) 576-8401 This report is publicly available from: National Technical information Service Department of Commerce 5285 Port Royal Road Springfield, VA 22161 (703) 487-4650 DOEIAL162350-65

77

Baseline risk assessment of ground water contamination at the Monument Valley Uranium Mill Tailings Site, Cane Valley, Arizona. Revision 1  

SciTech Connect

This baseline risk assessment evaluates potential impact to public health or the environment from ground water contamination at the former uranium mill processing site in Cane Valley near Monument Valley, Arizona. The US Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project has relocated and stabilized this site`s tailings and other contaminated material in a disposal cell at Mexican Hat, Utah. The second phase of the UMTRA Project is to evaluate ground water contamination. This risk assessment is the first document specific to this site for the Ground Water Project that evaluates potential health and environmental risks. It will help determine the approach required to address contaminated ground water at the site.

Not Available

1994-08-01T23:59:59.000Z

78

Environmental assessment of remedial action at the Slick Rock uranium mill tailings sites Slick Rock, Colorado. Draft  

SciTech Connect

The Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA) authorized the US Department of Energy (DOE) to clean up two uranium mill tailings processing sites near Slick Rock, Colorado, in San Miguel County. The purpose of the cleanup is to reduce the potential health effects associated with the radioactive materials remaining on the sites and on vicinity properties (VP) associated with the sites. The US Environmental Protection Agency (EPA) promulgated standards for the UMTRCA that contained measures to control the contaminated materials and to protect the groundwater from further degradation. Remedial actions at the Slick Rock sites must be performed in accordance with these standards and with the concurrence of the US Nuclear Regulatory Commission (NRC).

NONE

1993-06-01T23:59:59.000Z

79

DOE/EA-1388: Environmental Assessment of Ground Water Compliance at the Shiprock Uranium Mill Tailings Site (September 2001)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

388 388 Environmental Assessment of Ground Water Compliance at the Shiprock Uranium Mill Tailings Site Final September 2001 Prepared by U.S. Department of Energy Grand Junction Office Grand Junction, Colorado Work Performed Under DOE Contract No. DE-AC13-96GJ87335 This Page Intentionally Blank DOE Grand Junction Office EA of Ground Water Compliance at the Shiprock Site September 2001 Final Page iii Contents Page Acronyms and Abbreviations ........................................................................................................ vii Executive Summary ....................................................................................................................... ix 1.0 Introduction .............................................................................................................................1

80

Remedial action and site design for stabilization of the inactive uranium mill tailings sites at Slick Rock, Colorado. Attachment 2, Geology report  

SciTech Connect

This report presents geologic considerations that are pertinent to the Remedial Action Plan for Slick Rock mill tailings. Topics covered include regional geology, site geology, geologic stability, and geologic suitability.

Not Available

1993-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Radiological survey of the inactive uranium-mill tailings at Falls City, Texas  

SciTech Connect

Results of a radiological survey conducted at the Falls City, Texas, site in July 1976 are presented. There are seven partial to fully stabilized tailings piles, and an overburden pile from an open-pit mine. Above ground gamma-ray exposure rate measurements show moderate levels of contamination throughout the area with a maximum exposure rate of 500 ..mu..R/hr above tailings pile 2. The average exposure rate over the different areas varied from 14 ..mu..R/hr over the southwest end of tailings pile 7 to 207 ..mu..R/hr over the northeast end of the same pile. Analyses of surface soil and dry-wash sediment samples, as well as calculations of subsurface /sup 226/Ra distribution, serve to define the spread of tailings around the area. Water erosion of the tailings is evident, but, because of abundant growth of vegetation on the tailings piles, wind erosion probably is not a major problem.

Haywood, F.F.; Christian, D.J.; Loy, E.T.; Lorenzo, D.; Ellis, B.S.

1980-10-01T23:59:59.000Z

82

Radiologic characterization of the Mexican Hat, Utah, uranium mill tailings remedial action site: Appendix D, Addenda D1--D7  

SciTech Connect

This radiologic characterization of the inactive uranium millsite at Mexican Hat, Utah, was conducted by Bendix Field Engineering Corporation foe the US Department of Energy (DOE), Grand Junction Project Office, in response to and in accord with a Statement of Work prepared by the DOE Uranium Mill tailings Remedial Action Project (UMTRAP) Technical Assistance Contractor, Jacobs Engineering Group, Inc. the objective of this project was to determine the horizontal and vertical extent of contamination that exceeds the US Environmental Protection Agency (EPA) standards at the Mexican Hat site. The data presented in this report are required for characterization of the areas adjacent to the Mexican Hat tailings piles and for the subsequent design of cleanup activities. Some on-pile sampling was required to determine the depth of the 15-pCi/g Ra-226 interface in an area where wind and water erosion has taken place.

Ludlam, J.R.

1985-01-01T23:59:59.000Z

83

Survey of Radionuclide Distributions Resulting from the Church Rock, New Mexico, Uranium Mill Tailings Pond Dam Failure  

SciTech Connect

An intensive site survey and on-site analysis program were conducted to evaluate the distribution of four radionucliGes in the general vicinity of Gallup, New Mexico, subsequent to the accidental breach of a uranium mill tailings pond dam and the release of a large quantity of tailings pond materials. The objective of this work was to determine the distribution and concentration levels of {sup 210}Pb, {sup 226}Ra, {sup 230}Th, and {sup 238}U in the arroyo that is immediately adjacent to the uranium tailings pond (pipeline arroyo) and in the Rio Puerco arroyo into which the pipeline arroyo drains. An intensive survey between the United Nuclear Corporation (UNC) Church Rock Mill site and the New Mexico-Arizona state border was performed. Sampling locations were established at approximately 500-ft intervals along the arroyo. During the weeks of September 24 through October 5, 1979, a series of samples was collected from alternate sampling locations along the arroyo. The purpose of this collection of samples and their subsequent analysis was to provide an immediate evaluation of the extent and the levels of radioactive contamination. The data obtained from this extensive survey were then compared to action levels which had been proposed by the Nuclear Regulatory Commission and were adapted by the New Mexico Environmental Improvement Division (NMEID) for {sup 230}Th and {sup 226}Ra concentrations that would require site cleanup. The Pacific Northwest Laboratory/Nuclear Regulatory Commission mobile laboratory van was on-site at the UNC Church Rock Mill from September 22, 1979, through December 13, 1979, and was manned by one or more PNL personnel for all but four weeks of this time period. Approximately 1200 samples associated with the Rio Puerco survey were analyzed 1n the laboratory. An additional 1200 samples related to the Rio Puerco cleanup operations which the United Nuclear Corporation was conducting were analyzed on-site in the mobile laboratory. The purpose of these analyses was to determine the effectiveness of the cleanup operations that were ongoing and to evaluate what additional cleanup would be required. This on-site analysis of radioactive contamination constituted the principal task of this project, with the identification of those portions of the arroyo exceeding the NMEID proposed cleanup criteria being the major output. Additiond1 tasks included an evaluation of the initial soil sampling scheme (letter from T. Wolff [NMEID] to J. Abiss [UNC]. oated September 25, 1979) and the proposed NMEID verification sampling scheme (letter from T. Buhl [NMEID] to H. Miller [NRC]. dated April 23, 1980).

Weimer, W. C.; Kinnison, R. R.; Reeves, J. H.

1981-12-01T23:59:59.000Z

84

2013 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites  

SciTech Connect

This report, in fulfillment of a license requirement, presents the results of long-term surveillance and maintenance activities conducted by the U.S. Department of Energy (DOE) Office of Legacy Management (LM) in 2013 at 19 uranium mill tailings disposal sites established under Title I of the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978.1 These activities verified that the UMTRCA Title I disposal sites remain in compliance with license requirements. DOE operates 18 UMTRCA Title I sites under a general license granted by the U.S. Nuclear Regulatory Commission (NRC) in accordance with Title 10 Code of Federal Regulations Part 40.27 (10 CFR 40.27). As required under the general license, a long-term surveillance plan (LTSP) for each site was prepared by DOE and accepted by NRC. The Grand Junction, Colorado, Disposal Site, one of the 19 Title I sites, will not be included under the general license until the open, operating portion of the cell is closed. The open portion will be closed either when it is filled or in 2023. This site is inspected in accordance with an interim LTSP. Long-term surveillance and maintenance services for these disposal sites include inspecting and maintaining the sites; monitoring environmental media and institutional controls; conducting any necessary corrective actions; and performing administrative, records, stakeholder relations, and other regulatory stewardship functions. Annual site inspections and monitoring are conducted in accordance with site-specific LTSPs and procedures established by DOE to comply with license requirements. Each site inspection is performed to verify the integrity of visible features at the site; to identify changes or new conditions that may affect the long-term performance of the site; and to determine the need, if any, for maintenance, follow-up or contingency inspections, or corrective action in accordance with the LTSP. LTSPs and site compliance reports are available on the Internet at http://www.lm.doe.gov/.

none,

2014-03-01T23:59:59.000Z

85

2013 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites  

SciTech Connect

This report, in fulfillment of a license requirement, presents the results of long-term surveillance and maintenance activities conducted by the U.S. Department of Energy (DOE) Office of Legacy Management in 2013 at six uranium mill tailings disposal sites reclaimed under Title II of the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978. These activities verified that the UMTRCA Title II disposal sites remain in compliance with license requirements. DOE manages six UMTRCA Title II disposal sites under a general license granted by the U.S. Nuclear Regulatory Commission (NRC) established at Title 10 Code of Federal Regulations Part 40.28. Reclamation and site transition activities continue at other sites, and DOE ultimately expects to manage approximately 27 Title II disposal sites. Long-term surveillance and maintenance activities and services for these disposal sites include inspecting and maintaining the sites; monitoring environmental media and institutional controls; conducting any necessary corrective action; and performing administrative, records, stakeholder services, and other regulatory functions. Annual site inspections and monitoring are conducted in accordance with site-specific long-term surveillance plans (LTSPs) and procedures established by DOE to comply with license requirements. Each site inspection is performed to verify the integrity of visible features at the site; to identify changes or new conditions that may affect the long-term performance of the site; and to determine the need, if any, for maintenance, follow-up inspections, or corrective action. LTSPs and site compliance reports are available online at http://www.lm.doe.gov

none,

2013-11-01T23:59:59.000Z

86

Remedial Action Plan and Site Design for Stabilization of the Inactive Uranium Mill Tailings Site, Maybell, Colorado. Remedial action selection report: Attachment 2, Geology report, Final  

SciTech Connect

The Maybell uranium mill tailings site is 25 miles (mi) (40 kilometers [km]) west of the town of Craig, Colorado, in Moffat County, in the northwestern part of the state. The unincorporated town of Maybell is 5 road mi (8 km) southwest of the site. The designated site covers approximately 110 acres (ac) (45 hectares [ha]) and consists of a concave-shaped tailings pile and rubble from the demolition of the mill buildings buried in the former mill area. Contaminated materials at the Maybell processing site include the tailings pile, which has an average depth of 20 feet (ft) (6 meters [m]) and contains 2.8 million cubic yards (yd{sup 3}) (2.1 million cubic meters [m{sup 3}]) of tailings. The former mill processing area is on the north side of the site and contains 20,000 yd{sup 3} (15,000 m{sup 3}) of contaminated demolition debris. Off-pile contamination is present and includes areas adjacent to the tailings pile, as well as contamination dispersed by wind and surface water flow. The volume of off-pile contamination to be placed in the disposal cell is 550,000 yd{sup 3} (420,000 m{sup 3}). The total volume of contaminated materials to be disposed of as part of the remedial action is estimated to be 3.37 million yd{sup 3} (2.58 million m{sup 3}). Information presented in this Final Remedial Action Plan (RAP) and referenced in supporting documents represents the current disposal cell design features and ground water compliance strategy proposed by the US Department of Energy (DOE) for the Maybell, Colorado, tailings site. Both the disposal cell design and the ground water compliance strategy have changed from those proposed prior to the preliminary final RAP document as a result of prudent site-specific technical evaluations.

Not Available

1994-06-01T23:59:59.000Z

87

Notice of Intent to Prepare an Environmental Impact Statement and to Conduct Public Scoping Meetings, and Notice of Floodplain and Wetlands Involvement for Remediation of the Moab Uranium Mill Tailings Site in Grand County, UT (12/20/02)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

69 69 Federal Register / Vol. 67, No. 245 / Friday, December 20, 2002 / Notices reauthorization that would improve the framework in which the Federal Government promotes access to postsecondary education and ensures accountability of taxpayer funds? Invitation To Comment Interested persons are invited to submit comments and recommendations regarding the reauthorization of the Higher Education Act. All comments submitted in response to this notice will be available for public inspection, during and after the comment period at 1990 K Street, NW., 8th floor, Washington, DC, between the hours of 9 a.m. and 4 p.m., Monday through Friday of each week except Federal holidays. Electronic Access to This Document You may view this document, as well as all other Department of Education

88

Notice of Availability of the Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Draft Environmental Impact Statement (DOE/EIS-0355D) (12/3/04)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

256 256 Federal Register / Vol. 69, No. 232 / Friday, December 3, 2004 / Notices 877-8339 between 8 a.m. and 8 p.m. Eastern time, Monday through Friday. SUPPLEMENTARY INFORMATION: The changes to the agenda for the December 2004 meeting of the National Advisory Committee, to be held at the Ritz Carlton Hotel at Pentagon City, 1250 South Hayes Street, Arlington, VA, are as follows: (1) On Monday, December 13, and Tuesday, December 14, 2004, the National Advisory Committee is now scheduled to meet from 8 a.m. to approximately 6 p.m. The National Advisory Committee will not meet on Wednesday, December 15, 2004. (2) On Wednesday, December 15, the Accreditation and State Liaison Staff will provide an informational briefing on the new Web-based process for electronic submission of petitions for

89

Notice of Availability of the Remediation of the Moab Uranium Mill Tailings Final Environmental Impact Statement, Grand and San Juan Counties, Utah, Final Environmental Impact Statement (DOE/EIS-0355) (08/05/05)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 0 Federal Register / Vol. 70, No. 150 / Friday, August 5, 2005 / Notices that is cross referenced by the individual's name on a separate list. SAFEGUARDS: All physical access to the Department's site, and the site of the Department's contractor where this system of records is maintained, is controlled and monitored by security personnel. The computer system employed by the Department offers a high degree of resistance to tampering and circumvention. This computer system limits data access to Department and contract staff on a ''need to know'' basis, and controls individual users'' ability to access and alter records within the system. The contractor, Mathematica Policy Research, Inc. (MPR), has established a set of procedures to ensure confidentiality of data. The system

90

Baseline risk assessment of ground water contamination at the Monument Valley uranium mill tailings site Cane Valley, Arizona  

SciTech Connect

The U.S. Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project consists of the Surface Project (Phase I) and the Ground Water Project (Phase II). Under the UMTRA Surface Project, tailings, radioactive contaminated soil, equipment, and materials associated with the former uranium ore processing at UMTRA Project sites are placed into disposal cells. The cells are designed to reduce radon and other radiation emissions and to minimize further contamination of ground water. Surface cleanup at the Monument Valley UMTRA Project site near Cane Valley, Arizona, was completed in 1994. The Ground Water Project evaluates the nature and extent of ground water contamination that resulted from the uranium ore processing activities. The Ground Water Project is in its beginning stages. Human health may be at risk from exposure to ground water contaminated by uranium ore processing. Exposure could occur by drinking water pumped out of a hypothetical well drilled in the contaminated areas. Adverse ecological and agricultural effects may also result from exposure to contaminated ground water. For example, livestock should not be watered with contaminated ground water. A risk assessment describes a source of contamination, how that contamination reaches people and the environment, the amount of contamination to which people or the ecological environment may be exposed, and the health or ecological effects that could result from that exposure. This risk assessment is a site-specific document that will be used to evaluate current and potential future impacts to the public and the environment from exposure to contaminated ground water. The results of this evaluation and further site investigations will be used to determine a compliance strategy to comply with the UMTRA ground water standards.

NONE

1996-03-01T23:59:59.000Z

91

Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance  

SciTech Connect

This document presents guidance for implementing the process that the U.S. Department of Energy (DOE) Office of Legacy Management (LM) will use for assuming perpetual responsibility for a closed uranium mill tailings site. The transition process specifically addresses sites regulated under Title II of the Uranium Mill Tailings Radiation Control Act (UMTRCA) but is applicable in principle to the transition of sites under other regulatory structures, such as the Formerly Utilized Sites Remedial Action Program.

none,

2012-03-01T23:59:59.000Z

92

DOE/EA-1313: Environmental Assessment of Ground Water Compliance at the Monument Valley, Arizona, Uranium Mill Tailings Site (03/22/05)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE/EA-1313 DOE/EA-1313 Rev. 0 Environmental Assessment of Ground Water Compliance at the Monument Valley, Arizona, Uranium Mill Tailings Site Final March 2005 Prepared by U.S. Department of Energy Office of Legacy Management Grand Junction, Colorado Work Performed Under DOE Contract No. DE-AC01-02GJ79491 for the U.S. Department of Energy Document Number U0069700 This Page Intentionally Blank DOE Office of Legacy Management EA of Ground Water Compliance at the Monument Valley Site March 2005 Final Page iii Contents Page Acronyms and Abbreviations ....................................................................................................... vii Executive Summary.......................................................................................................................

93

Remedial Action Plan and site design for stabilization of the inactive uranium mill tailings site at Mexican Hat, Utah: Appendix E. Final report  

SciTech Connect

This document provides Appendix E of the Remedial Action Plan (RAP) presented in 1988 for the stabilization of the inactive uranium mill tailings at the Mexican Hat, Utah site. The RAP was developed to serve a two- fold purpose. It presents the activities proposed by the Department of Energy (DOE) to accomplish long-term stabilization and control of the residual radioactive materials (RRM) from Monument Valley, Arizona, and Mexican Hat, Utah, at the Mexican Hat disposal site. It also serves to document the concurrence of both the Navajo Nation and the Nuclear Regulatory Commission (NRC) in the remedial action. This agreement, upon execution by the DOE and the Navajo Nation and concurrence by the NRC, becomes Appendix B of the Cooperative Agreement. The RAP has been structured to provide a comprehensive understanding of the remedial action proposed for the Monument Valley and Mexican Hat sites. It includes specific design and construction requirements for the remedial action.

NONE

1988-07-01T23:59:59.000Z

94

Evaluation of Background Concentrations of Contaminants in an Unusual Desert Arroyo Near a Uranium Mill Tailings Disposal Cell - 12260  

SciTech Connect

The U.S. Department of Energy (DOE) Office of Legacy Management (LM) manages 27 sites that have groundwater containing uranium concentrations above background levels. The distal portions of the plumes merge into background groundwater that can have 50 ?g/L or more uranium. Distinguishing background from site-related uranium is often problematic, but it is critical to determining if remediation is warranted, establishing appropriate remediation goals, and evaluating disposal cell performance. In particular, groundwater at disposal cells located on the upper Cretaceous Mancos Shale may have relatively high background concentrations of uranium. Elevated concentrations of nitrate, selenium, and sulfate accompany the uranium. LM used geologic analogs and uranium isotopic signatures to distinguish background groundwater from groundwater contaminated by a former uranium processing site. The same suite of contaminants is present in groundwater near former uranium processing sites and in groundwater seeps emanating from the Mancos Shale over a broad area. The concentrations of these contaminants in Many Devils Wash, located near LM's Shiprock disposal cell, are similar to those in samples collected from many Mancos seeps, including two analog sites that are 8 to 11 km from the disposal cell. Samples collected from Many Devils Wash and the analog sites have high AR values (about 2.0)-in contrast, groundwater samples collected near the tailings disposal cell have AR values near 1.0. These chemical signatures raise questions about the origin of the contamination seeping into Many Devils Wash. (authors)

Bush, Richard P. [U.S. Department of Energy Office of Legacy Management (United States); Morrison, Stan J. [S.M. Stoller Corporation (United States)

2012-07-01T23:59:59.000Z

95

Ground water remediation at the Moab, Utah, USA, former uranium-ore processing site  

Science Journals Connector (OSTI)

Seepage from the Moab, Utah, USA, former uranium-ore processing site resulted in ammonia and uranium contamination of naturally occurring saline ground water in alluvium adjacent to the Colorado River. An interim...

Donald R. Metzler; Joseph D. Ritchey; Kent A. Bostick

2008-01-01T23:59:59.000Z

96

Date centerdTimes New Roman  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Cleanup Moab Mill Tailings Cleanup Project OAS-RA-L-10-03 April 2010 DOE F 1325.8 (08-93) United States Government Department of Energy Memorandum DATE: April 23, 2010 Audit Report Number: OAS-RA-L-10-03 REPLY TO ATTN OF: IG-34 (A09ID019) SUBJECT: Report on "Moab Mill Tailings Cleanup Project" TO: Deputy Assistant Secretary, Program and Site Support, EM-50 INTRODUCTION AND OBJECTIVE The Moab Uranium Mill Tailings Remedial Action Project (Moab Project) is located at a former uranium-ore processing facility near Moab, Utah on the west bank of the Colorado River. In 2005, the Department of Energy (Department) issued a Record of Decision to relocate, by rail, approximately 16 million tons of uranium mill tailings from

97

Microsoft PowerPoint - News Flash_FINAL_073009_vvb  

NLE Websites -- All DOE Office Websites (Extended Search)

July 30, 2009 July 30, 2009 Moab Steps Up the Pace of Mill Tailings Shipments U.S. Department of Energy For more information on EM Recovery Act, visit: www.em.doe.gov/emrecovery Recovery Act funds ($108 million) are being used to accelerate the frequency of uranium mill tailings shipments from the Moab Uranium Mill Tailings Remedial Action (UMTRA) Project site to a disposal site near Crescent Junction, Utah. Mill tailings are a byproduct of uranium mining and processing. Located northwest of Moab in Grand County, Utah, and on the west bank of the Colorado River, the Moab UMTRA Project includes the former Atlas uranium mill site that ceased operations in 1984. About 130 acres of the site is covered by a 16-million-ton uranium mill tailings pile. The mill tailings are being moved by train to the disposal site 30 miles away,

98

Remedial action and site design for stabilization of the inactive uranium mill tailings sites at Slick Rock, Colorado. Attachment 2, Geology report: Appendix B, Preliminary final  

SciTech Connect

Detailed investigations of geologic, geomorphic, and seismic conditions at the Burro Canyon site were conducted by the US Department of Energy (DOE) as a disposal site for the tailings at two processing sites near the Slick Rock, Colorado, post office. The purposes of these studies are basic site characterization and identification of potential geologic hazards that could affect long-term site stability. Subsequent engineering studies (e.g., analyses of hydrologic and liquefaction hazards) used the data developed in these studies. The geomorphic analysis was employed in the design of effective erosion protection. Studies of the regional and local seismotectonic setting, which included a detailed search for possible capable faults within a 65-km radius of the site, provided the basis for seismic design parameters.

Not Available

1994-03-01T23:59:59.000Z

99

DOE - Office of Legacy Management -- Falls City Mill Site - TX...  

Office of Legacy Management (LM)

Control Act Title I Disposal Sites-Falls City, Texas, Disposal Site. LMSS10631. March 2014 Baseline Risk Assessment of Ground Water Contamination at the Uranium Mill Tailings...

100

EM Newsletters  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

newsletters Office of Environmental Management 1000 newsletters Office of Environmental Management 1000 Independence Ave., SW Washington, DC 20585 202-586-7709 en Moab Reaches 40-Percent Mark in Tailings Removal http://energy.gov/em/articles/moab-reaches-40-percent-mark-tailings-removal moab-reaches-40-percent-mark-tailings-removal" class="title-link">Moab Reaches 40-Percent Mark in Tailings Removal

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

DOE - Office of Legacy Management -- Monticello Mill Site - UT 03  

NLE Websites -- All DOE Office Websites (Extended Search)

Mill Site - UT 03 Mill Site - UT 03 FUSRAP Considered Sites Site: Monticello Mill Site (UT.03) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Monticello, Utah, Disposal and Processing Sites Documents Related to Monticello Mill Site Monticello Mill Tailings Site Operable Unit III Interim Remedial Action Progress Report July 1999-July 2000. GJO-2000-163-TAR. September 2000 U.S. Department of Energy at Grand Junction 2003 Annual Inspection Monticello, Utah November 2003 2005 Annual Inspection of the Monticello Mill Tailings (USDOE) and Monticello Radioactively Contaminated Properties Sites December 2005 Office

102

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 21490 of 28,905 results. 81 - 21490 of 28,905 results. Page Manhattan Project Signature Facilities The Department of Energy, in the mid-1990s, developed a list of eight Manhattan Project properties that were designated as "Signature Facilities." These properties, taken together, provided the... http://energy.gov/management/manhattan-project-signature-facilities Article DOE Amends Decision for the Remediation of the Moab Uranium Mill Tailings in Moab, Utah WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced an amendment to its 2005 Record of Decision (ROD) for the Moab Uranium Mill Tailings Remedial Action (UMTRA) Project to allow... http://energy.gov/articles/doe-amends-decision-remediation-moab-uranium-mill-tailings-moab-utah Page EIS-0250: Geologic Repository for the Disposal of Spent Nuclear Fuel

103

Audit Letter Report: OAS-RA-L-10-03 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 Audit Letter Report: OAS-RA-L-10-03 April 23, 2010 Audit of Moab Mill Tailings Cleanup Project The Moab Uranium Mill Tailings Remedial Action Project (Moab Project) is located at a former uranium-ore processing facility near Moab, Utah on the west bank of the Colorado River. In 2005, the Department of Energy (Department) issued a Record of Decision to relocate, by rail, approximately 16 million tons of uranium mill tailings from that location to a disposal site 30 miles away in Crescent Junction, Utah. In June 2008, the Department awarded a $92 million contract, with approximately $6 million in available fee, to EnergySolutions to construct the necessary infrastructure, upgrade the rail lines, and begin the transportation of mill tailings to Crescent Junction. Under the terms of the contract,

104

Microbiological and Geochemical Characterization of Fluvially Deposited Sulfidic Mine Tailings  

Science Journals Connector (OSTI)

...NO3 , and Mn(IV) are depleted. However, it has been...REFERENCES American Public Health Association Phenanthroline...microorganisms inhabiting uranium mill tailings. . Moore...Microbial diversity in uranium mine waste heaps...bacteria in the Nordic Uranium tailings deposit, Elliot...

Bruce Wielinga; Juliette K. Lucy; Johnnie N. Moore; October F. Seastone; James E. Gannon

1999-04-01T23:59:59.000Z

105

EIS-0355: Draft Environmental Impact Statement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Draft Environmental Impact Statement Draft Environmental Impact Statement EIS-0355: Draft Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah The purpose of the Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Draft Environmental Impact Statement is to provide information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water Project (DOE/EIS-0198,

106

EIS-0355: EPA Notice of Availability of the Final Environmental Impact  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

55: EPA Notice of Availability of the Final Environmental 55: EPA Notice of Availability of the Final Environmental Impact Statement EIS-0355: EPA Notice of Availability of the Final Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah The Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement provides information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings

107

EIS-0355: EPA Notice of Availability of the Final Environmental Impact  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EPA Notice of Availability of the Final Environmental EPA Notice of Availability of the Final Environmental Impact Statement EIS-0355: EPA Notice of Availability of the Final Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah The Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement provides information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings

108

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 1040 of 28,905 results. 31 - 1040 of 28,905 results. Article CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE Moab, UT - Sixteen million tons of uranium mill tailings 80 feet high stood on the banks of the Colorado River near Moab in southeast Utah, as a legacy to the former ore-processing site that operated for nearly three decades beginning in the mid-1950s. http://energy.gov/em/articles/cleaning-mill-tailings-and-ground-water-moab-umtra-project-site Download CX-001669: Categorical Exclusion Determination Install Fence Around Bryan Mound K-9 Training Area CX(s) Applied: B1.11 Date: 04/20/2010 Location(s): Freeport, Texas Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-001669-categorical-exclusion-determination

109

EIS-0355: DOE Notice of Availability of the Final Environmental Impact  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final Environmental Final Environmental Impact Statement EIS-0355: DOE Notice of Availability of the Final Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah The Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement provides information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings

110

EIS-0355: DOE Notice of Availability of the Final Environmental Impact  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Notice of Availability of the Final Environmental DOE Notice of Availability of the Final Environmental Impact Statement EIS-0355: DOE Notice of Availability of the Final Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah The Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement provides information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings

111

EIS-0355: Final Environmental Impact Statement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final Environmental Impact Statement Final Environmental Impact Statement EIS-0355: Final Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah The Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Final Environmental Impact Statement provides information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water Project (DOE/EIS-0198, October 1996). The

112

EIS-0355: Draft Environmental Impact Statement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Draft Environmental Impact Statement Draft Environmental Impact Statement EIS-0355: Draft Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah The purpose of the Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Draft Environmental Impact Statement is to provide information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water Project (DOE/EIS-0198,

113

Evan Mills  

NLE Websites -- All DOE Office Websites (Extended Search)

Evan Mills Evan Mills Evan Mills Residential Building Systems Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R2000 Berkeley CA 94720 Office Location: 90-2058 (510) 486-6784 EMills@lbl.gov Evan Mills is a Staff Scientist in the Building Technology and Urban Systems Department, and has worked in the energy efficiency field since 1982. His core commercial-buildings expertise is in energy benchmarking, commissioning, high-tech buildings, risk management, and the efficiency business case. He is a frequent speaker to academic and industry audiences on buildings energy efficiency, author of over 200 publications, and member of the Intergovernmental Panel on Climate Change, which shared the 2007 Nobel Peace Prize. He is recipient of an R&D 100 award for commercializing

114

Andrew Mills  

NLE Websites -- All DOE Office Websites (Extended Search)

Andrew D. Mills Andrew D. Mills Andrew Mills Electricity Markets and Policy Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R4000 Berkeley CA 94720 Office Location: 90-4126J (510) 486-4059 ADMills@lbl.gov Andrew D. Mills is a Principal Research Associate in the Electricity Markets and Policy Group at Lawrence Berkeley National Laboratory. Andrew conducts research and provides policy analysis on renewables and transmission, including power system operations and valuation of wind and solar. Andrew's has published his research in Energy Policy and was a contributing author to the IPCC Special Report on Renewable Energy. Previously, Andrew worked with All Cell Technologies, a battery technologystart-up company. Andrew has an M.S. in Energy and Resources from UC Berkeley and a B.S. in

115

Wind Mills  

Science Journals Connector (OSTI)

Over 5,000 years ago, the ancient Egyptians used wind to sail ships on the Nile River. While the proliferation of water mills was in full swing, windmills appeared to harness more inanimate energy by employing wind

J. S. Rao

2011-01-01T23:59:59.000Z

116

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 9770 of 28,905 results. 61 - 9770 of 28,905 results. Article V-112: Microsoft SharePoint Input Validation Flaws Permit Cross-Site Scripting and Denial of Service Attacks This security update resolves four reported vulnerabilities in Microsoft SharePoint and Microsoft SharePoint Foundation. http://energy.gov/cio/articles/v-112-microsoft-sharepoint-input-validation-flaws-permit-cross-site-scripting-and Article 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. http://energy.gov/em/articles/6-million-tons-mill-tailings-removed-doe-moab-project-site

117

American Recovery & Reinvestment Act Newsletter - Issue 24  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moving 2.4 million tons of uranium mill tail- Moving 2.4 million tons of uranium mill tail- ings away from the Colorado River is only one of the activi- ties the Moab Uranium Mill Tailings Remedial Action Project accomplished with $108 million from the American Recovery and Reinvestment Act. The Moab Project has achieved numerous accomplishments in Recovery Act-funded efforts to help move the tailings safely and efficiently to a permanent disposal facility near Crescent Junction, 30 miles north of the Moab site. The Recovery Act funded the construction of an underpass of a state highway specifically for project vehicles, which mostly include haul trucks carrying the tailings. The underpass was a significant safety enhancement because it eliminated the intersection of the project haul road and the public highway.

118

EIS-0355: Notice of Intent to Prepare an Environmental Impact Statement and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Notice of Intent to Prepare an Environmental Impact Notice of Intent to Prepare an Environmental Impact Statement and to Conduct Public Scoping Meetings and Notice of Floodplain and Wetlands Involvement EIS-0355: Notice of Intent to Prepare an Environmental Impact Statement and to Conduct Public Scoping Meetings and Notice of Floodplain and Wetlands Involvement Remediation of the Moab Uranium Mill Tailings Site in Grand County, UT DOE announces its intent to prepare an Environmental Impact Statement (EIS) to assess the potential environmental impacts of actions that would remediate contaminated soils, tailings, and ground water at the Moab Uranium Mill Tailings Site (Moab Project Site), Grand County, Utah, and contaminated soils in adjacent public and private properties (vicinity properties) near the Moab Project Site.

119

EM News | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 24, 2013 December 24, 2013 A haul truck carrying a container is loaded with mill tailings at the Moab site. Once loaded and lidded, the container will be placed on a railcar for shipment by train to the Crescent Junction disposal site. Moab Reaches 40-Percent Mark in Tailings Removal MOAB, Utah - The Moab Uranium Mill Tailings Remedial Action Project had a productive year, despite continued budget constraints and a first-ever, three-month curtailment of shipping operations last winter. December 24, 2013 The Akuna customized model setup user environment contains NASA World Wind and LaGrit/Gridder in its toolset user interface. The High Performance Computing environment allows the user to do Single Run, Sensitivity Analysis, Parameter Estimation and Uncertainty Qualification.

120

EM Newsletters | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 27, 2012 December 27, 2012 Laborers place a disposable liner in a tailings container. Moab Project Continues Progress on Tailings Removal with Contract Transition MOAB, Utah - The Moab mill tailings removal project in Utah ended the year having shipped more than 35 percent of the total 16 million tons of uranium mill tailings off-site. The tailings are being transported by rail 30 miles north to a disposal cell for permanent storage. More than 1 million tons of tailings were shipped during fiscal year 2012, which closed at the end of September. December 27, 2012 From left, EM Deputy Assistant Secretary for Waste Management Frank Marcinowski, San Ildefonso Pueblo Governor Terry Aguilar, Los Alamos County Council Chair Sharon Stover, New Mexico Governor Susana Martinez, Los Alamos Site Office Manager Kevin Smith, and Laboratory Director Charles McMillan applaud as the 1,000th shipment of waste leaves Los Alamos National Laboratory.

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

EIS-0355: Amended Record of Decision | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: Amended Record of Decision 5: Amended Record of Decision EIS-0355: Amended Record of Decision Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, UT The U.S. Department of Energy (DOE) is amending its decision regarding the transportation method that DOE will use to relocate uranium mill tailings and other contaminated materials (residual radioactive material) at the Moab milling site and vicinity properties in Utah. Amended Record of Decision for the Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, UT (DOE/EIS-0355) (February 2008) 73 FR 11103 More Documents & Publications Meeting Minutes: February 20-21, 2007 Generation-IV Roadmap Report of the Fuel Cycle Crosscut Group International Nuclear Energy Research Initiative: 2011 Annual Report

122

DOE - Office of Legacy Management -- Edgemont Mill Site - SD 01  

Office of Legacy Management (LM)

Edgemont Mill Site - SD 01 Edgemont Mill Site - SD 01 FUSRAP Considered Sites Site: Edgemont Mill Site (SD.01) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Edgemont, South Dakota, Disposal Site Documents Related to Edgemont Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites-Edgemont, South Dakota, Disposal Site. LMS/S09415. November 2012 U.S. Department of Energy 2008 UMTRCA Title II Sites Annual Report November 2008 Edgemont, South Dakota FACT SHEET Office of Legacy Management Edgemont, South Dakota, Disposal Site This fact sheet provides information about the Uranium Mill

123

EIS-0355: EPA Notification of Availability of the Draft Environmental  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EPA Notification of Availability of the Draft EPA Notification of Availability of the Draft Environmental Impact Statement EIS-0355: EPA Notification of Availability of the Draft Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah The purpose of the Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Draft Environmental Impact Statement is to provide information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Final Programmatic Environmental Impact Statement for the

124

EIS-0355: DOE Notice of Availability of the Draft Environmental Impact  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Draft Environmental Draft Environmental Impact Statement EIS-0355: DOE Notice of Availability of the Draft Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah The purpose of the Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Draft Environmental Impact Statement is to provide information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Final Programmatic Environmental Impact Statement for the

125

DOE - Office of Legacy Management -- Tuba City Mill Site - AZ 0-02  

Office of Legacy Management (LM)

Mill Site - AZ 0-02 Mill Site - AZ 0-02 FUSRAP Considered Sites Site: Tuba City Mill Site (AZ.0-02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Tuba City, Arizona, Disposal Site Documents Related to Tuba City Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Tuba City, Arizona, Disposal Site. LMS/S09461. February 2013 2008 UMTRCA Title I Annual Report January 2009 Tuba City, Arizona February 2009 Groundwater and Surface Water Sampling at the Tuba City, Arizona Disposal Site May 2009 This fact sheet provides information about the Uranium Mill Tailings

126

DOE - Office of Legacy Management -- Uravan Mill Site - CO 02  

Office of Legacy Management (LM)

Uravan Mill Site - CO 02 Uravan Mill Site - CO 02 FUSRAP Considered Sites Site: Uravan Mill Site (CO.02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Naturita, Colorado, Processing Site Documents Related to Uravan Mill Site Data Validation Package for the July and October 2008 Water Sampling at the Naturita Processing and Disposal Sites Data Validation Report for the July 2009 Groundwater and Surface Water Sampling at the Naturita, Colorado, Processing Site; LMS/NAP/S00709; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Naturita, Colorado,

127

Uranium mill tailings: Congress addresses a long-neglected problem  

Science Journals Connector (OSTI)

...environmental viewpoint," says one public-interest lobbyist. This...a nu-clear power piant in Hanford, Washing-ton. The study...congressional advocates of the public's right to government information...ap-praising each according to its public re-sponsiveness and recommending...

LJ Carter

1978-10-13T23:59:59.000Z

128

Monticello Mill Tailings, Operable Unit III Surface and Ground...  

Office of Legacy Management (LM)

use of the contaminated alluvial aquifer as a primary drinking water source fails, then Alternative 4 will have the greatest short-term effectiveness because it has the shortest...

129

DOE 2012 Occupational Radiation Exposure Report ALARA Activities...  

Office of Environmental Management (EM)

near Crescent Junction, Utah. The scope also includes active remediation of ground water at the mill site (Moab site). The Uranium Reduction Company constructed the Moab...

130

White-Tailed Deer  

NLE Websites -- All DOE Office Websites (Extended Search)

White-Tailed Deer White-Tailed Deer Nature Bulletin No. 208-A November 27, 1965 Forest Preserve District of Cook County Seymour Simon, President Roland F. Eisenbeis, Supt. of Conservation WHITE-TAILED DEER. In October, 1621, the Pilgrims decreed a harvest festival -- a holiday so that all might "after a more special manner, rejoice together". They had a good yield from the 20 acres of "Indian corn" which Squanto, the friendly Patuxet redskin had showed them how to plant in little mounds properly spaced and tended -- each fertilized with three herring placed like the spokes of a wheel, with the heads toward the center. They invited Massasoit, chief of the neighboring tribes, but when he arrived with 90 hungry braves, it was necessary for some of these to go out and kill five deer.

131

21 - Milling Control  

Science Journals Connector (OSTI)

Publisher Summary This chapter discusses milling control. Brix graph curves are used to denote and compare mill control efficiency. The degree to which the values obtained in the mills approach the theoretical curve indicates how well each mill is doing its work. To establish these brix curves, the brix of back-roller juice is generally taken. In dry crushing mills, the brix of the feed-roller juice is higher. In wet crushing mills, on the contrary, it is the back-roller juice which has the higher brix. Mill control is based on an equation expressing the fact that the weight of material entering the milling plant is equal to the weight leaving, cane = imbibition water = mixed juice = bagasse. This equation though does not work out strictly correct in practice. The basic equation serves mainly to determine the weight of bagasse, the three other terms being generally weighed or measured. Also, before analysis, the bagasse, in turn, also loses a small fraction of its weight, which is generally negligible. One important method for milling control calculation is using the Hawaiian method.

E. HUGOT

2014-01-01T23:59:59.000Z

132

Performance Period Total Fee Paid  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Period Period Total Fee Paid 4/29/2012 - 9/30/2012 $418,348 10/1/2012 - 9/30/2013 $0 10/1/2013 - 9/30/2014 $0 10/1/2014 - 9/30/2015 $0 10/1/2015 - 9/30/2016 $0 Cumulative Fee Paid $418,348 Contract Type: Cost Plus Award Fee Contract Period: $116,769,139 November 2011 - September 2016 $475,395 $0 Fee Information Total Estimated Contract Cost $1,141,623 $1,140,948 $1,140,948 $5,039,862 $1,140,948 Maximum Fee $5,039,862 Minimum Fee Fee Available Portage, Inc. DE-DT0002936 EM Contractor Fee Site: MOAB Uranium Mill Tailings - MOAB, UT Contract Name: MOAB Uranium Mill Tailings Remedial Action Contract September 2013 Contractor: Contract Number:

133

Colorado | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 9, 2011 June 9, 2011 EA-1770: Final Environmental Assessment Photovoltaic Solar Project at the Durango, Colorado, Disposal Site, La Plata County June 9, 2011 EA-1770: Finding of No Significant Impact Photovoltaic Solar Project at the Durango, Colorado Site June 4, 2011 CX-005942: Categorical Exclusion Determination Characterization of Most Promising Sequestration Formations in the Rocky Mountain Region - Drilling/Coring Actions CX(s) Applied: B3.1, B3.8 Date: 06/04/2011 Location(s): Craig, Colorado Office(s): Fossil Energy, National Energy Technology Laboratory June 3, 2011 Moab Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches Significant Milestone Grand Junction, CO - One quarter of the uranium mill tailings pile located in Moab, Utah, has been relocated to the Crescent Junction, Utah,

134

SCHEDULE OF FEES Wet Milling  

E-Print Network (OSTI)

SCHEDULE OF FEES Wet Milling 100 g.......................$120..per sample* 1 kilogram of Illinois offers five milling procedures to determine processing characteristics of corn. Laboratory times. WET MILLING The wet milling process is used to produce starch (99.6% purity) as the primary

Illinois at Urbana-Champaign, University of

135

DOE - Office of Legacy Management -- Riverton Mill Site - WY 0-04  

Office of Legacy Management (LM)

Mill Site - WY 0-04 Mill Site - WY 0-04 FUSRAP Considered Sites Site: Riverton Mill Site (WY.0-04 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Riverton, Wyoming, Processing Site Documents Related to Riverton Mill Site Data Validation Package for the November 2008 Groundwater and Surface Water Sampling at the Riverton, Wyoming, Processing Site. February 2009 U. S. Department of Energy (DOE) Status and Planned Actions at the Riverton, Wyoming, Uranium Mill Tailing Radiation Control Act (UMTRCA) Title I Site April Gil, PhD Environment Team Lead Office of Legacy Management (LM) May 2, 20122 Status and Action Summary 􀂄 Surface

136

DOE - Office of Legacy Management -- Gunnison Mill Site - CO 0-06  

Office of Legacy Management (LM)

Gunnison Mill Site - CO 0-06 Gunnison Mill Site - CO 0-06 FUSRAP Considered Sites Site: Gunnison Mill Site (CO.0-06 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Gunnison, Colorado, Processing Site Documents Related to Gunnison Mill Site Verification Montioring Report for the Gunnison, Colorado, Processing Site, September 2007. 2011 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Gunnison, Colorado, Disposal Site. LMS/S08056. January 2012 U.S. Department of Energy 2009 UMTRCA Title I Annual Report January 2010 Gunnison, Colorado Page 8-1 8.0 Gunnison, Colorado, Disposal Site

137

DOE - Office of Legacy Management -- Naturita Mill Site - CO 0-08  

Office of Legacy Management (LM)

Naturita Mill Site - CO 0-08 Naturita Mill Site - CO 0-08 FUSRAP Considered Sites Site: Naturita Mill Site (CO.0-08) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Naturita, Colorado, Processing Site Documents Related to Naturita Mill Site Data Validation Package for the July and October 2008 Water Sampling at the Naturita Processing and Disposal Sites Data Validation Report for the July 2009 Groundwater and Surface Water Sampling at the Naturita, Colorado, Processing Site; LMS/NAP/S00709; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Naturita, Colorado,

138

DOE - Office of Legacy Management -- Slick Rock Mill Site - CO 08  

NLE Websites -- All DOE Office Websites (Extended Search)

Slick Rock Mill Site - CO 08 Slick Rock Mill Site - CO 08 FUSRAP Considered Sites Site: Slick Rock Mill Site (CO.08) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Slick Rock, Colorado, Processing Site Documents Related to Slick Rock Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Slick Rock, Colorado, Disposal Site. LMS/S09461. February 2013 Verification Monitoring Report for the Slick Rock, Colorado, Processing Sites, 2007 Update June 2008 Office of Legacy Management DOE M/1577 2008 - -L Work Performed Under DOE Contract No. for the U.S.

139

DOE - Office of Legacy Management -- Green River Mill Site - UT 0-01  

Office of Legacy Management (LM)

Green River Mill Site - UT 0-01 Green River Mill Site - UT 0-01 FUSRAP Considered Sites Site: Green River Mill Site (UT.0-01 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Green River, Utah, Disposal Site Documents Related to Green River Mill Site Data Validation Package for the June 2009 Groundwater and Surface Water Sampling at the Green River, Utah, Disposal Site; LMS/GRN/S0609; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Green River, Utah, Disposal Site. LMS/S09461. February 2013 Historic Fact Sheet: Green River Disposal Site Uranium ore was

140

Long-Term Performance of Uranium Tailings Disposal Cells - 13340  

SciTech Connect

Recently, there has been interest in the performance and evolution of Uranium Mill Tailings Remedial Action (UMTRA) Project disposal cell covers because some sites are not compliant with groundwater standards. Field observations of UMTRA disposal cells indicate that rock covers tend to become vegetated and that saturated conductivities in the upper portion of radon barriers may increase due to freeze/thaw cycles and biointrusion. This paper describes the results of modeling that addresses whether these potential changes and transient drainage of moisture in the tailings affect overall performance of the disposal cells. A numerical unsaturated/saturated 3-dimensional flow model was used to simulate whether increases in saturated conductivities in radon barriers with rock covers affect the overall performance of the disposal cells using field data from the Shiprock, NM, UMTRA site. A unique modeling approach allowed simulation with daily climatic conditions to determine changes in moisture and moisture flux from the disposal cell. Modeling results indicated that increases in the saturated conductivity at the top of radon barrier do not influence flux from the tailings with time because the tailings behave similar hydraulically to the radon barrier. The presence of a thin layer of low conductivity material anywhere in the cover or tailings restricts flux in the worst case to the saturated conductivity of that material. Where materials are unsaturated at depth within the radon barrier of tailings slimes, conductivities are typically less than 10{sup -8} centimeters per second. If the low conductivity layer is deep within the disposal cell, its saturated properties are less likely to change with time. The significance of this modeling is that operation and maintenance of the disposal cells can be minimized if they are allowed to progress to a natural condition with some vegetation and soil genesis. Because the covers and underlying tailings have a very low saturated hydraulic conductivity after transient drainage, eventually the amount of moisture leaving the tailings has a negligible effect on groundwater quality. Although some of the UMTRA sites are not in compliance with the groundwater standards, the explanation may be legacy contamination from mining, or earlier higher fluxes from the tailings or unlined processing ponds. Investigation of other legacy sources at the UMTRA sites may help explain persistent groundwater contamination. (authors)

Bostick, Kent; Daniel, Anamary; Pill, Ken [Professional Project Services, Inc., 1100 Bethel Valley Road, Oak Ridge, TN, 37922 (United States)] [Professional Project Services, Inc., 1100 Bethel Valley Road, Oak Ridge, TN, 37922 (United States); Tachiev, Georgio; Noosai, Nantaporn; Villamizar, Viviana [Florida International University, 10555 W. Flagler St., EC 2100, Miami FL, 33174 (United States)] [Florida International University, 10555 W. Flagler St., EC 2100, Miami FL, 33174 (United States)

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Photo of the Week: An Express Train to Crescent Junction | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

An Express Train to Crescent Junction An Express Train to Crescent Junction Photo of the Week: An Express Train to Crescent Junction January 4, 2013 - 1:53pm Addthis In the 1950s, one of the largest uranium deposits in the U.S. was found near Moab, Utah. The Department of Energy began cleaning up the uranium mill tailings from the Moab Site in April 2009, using steel containers to transport more than five million tons of tailings for safe disposal near Crescent Junction, Utah. In this May 2012 photo, one of the trains is shown on the Union Pacific Railroad in Utah, passing a butte capped by a familiar southwest U.S. rock formation known as Navajo Sandstone. | Photo courtesy of the Department of Energy. In the 1950s, one of the largest uranium deposits in the U.S. was found near Moab, Utah. The Department of Energy began cleaning up the uranium

142

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 15490 of 26,764 results. 81 - 15490 of 26,764 results. Download Letter: Direction and Guidance for Implementing Direct DOE Relationship & Funding for EMSSABs From: Assistant Secretary, Jessie Hill Roberson (EM-11) To: Mr. Monte Wilson, Chair, INEEL Citizens Advisory Board http://energy.gov/em/downloads/letter-direction-and-guidance-implementing-direct-doe-relationship Article Summary of Decisions- November 19, 2012 - November 23, 2012 Summary: Decisions were issued on: - Application for Exception http://energy.gov/oha/articles/summary-decisions-november-19-2012-november-23-2012 Article Moab Project Continues Progress on Tailings Removal with Contract Transition MOAB, Utah - The Moab mill tailings removal project in Utah ended the year having shipped more than 35 percent of the total 16 million tons of

143

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 24560 of 28,905 results. 51 - 24560 of 28,905 results. Article Accelerating Offshore Wind Development Today the Energy Department announced investments in seven offshore wind demonstration projects. Check out our map to see where these projects will be located. http://energy.gov/articles/accelerating-offshore-wind-development Event Community Renewable Energy Webinar: Developing PV Projects This webinar will take place from 1-2:15 p.m. Mountain Standard Time. It will provide information on how the cities of Tucson, Arizona, and Minneapolis, Minnesota, utilized requests for proposals ... http://energy.gov/indianenergy/events/community-renewable-energy-webinar-developing-pv-projects Article Moab Project Continues Progress on Tailings Removal with Contract Transition MOAB, Utah - The Moab mill tailings removal project in Utah ended the

144

White Tail | Open Energy Information  

Open Energy Info (EERE)

Tail Tail Jump to: navigation, search Name White Tail Facility White Tail Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Exelon Wind Developer MAP Royalty Energy Purchaser Austin Energy Location Oilton TX Coordinates 27.490513°, -98.985926° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":27.490513,"lon":-98.985926,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

145

Evaluation of End Mill Coatings  

SciTech Connect

Milling tests were run on families of High Speed Steel (HSS) end mills to determine their lives while machining 304 Stainless Steel. The end mills tested were made from M7, M42 and T15-CPM High Speed Steels. The end mills were also evaluated with no coatings as well as with Titanium Nitride (TiN) and Titanium Carbo-Nitride (TiCN) coatings to determine which combination of HSS and coating provided the highest increase in end mill life while increasing the cost of the tool the least. We found end mill made from M42 gave us the largest increase in tool life with the least increase in cost. The results of this study will be used by Cutting Tool Engineering in determining which end mill descriptions will be dropped from our tool catalog.

L. J. Lazarus; R. L. Hester,

2005-08-01T23:59:59.000Z

146

Mills Laboratory | Savannah River Ecology Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Currently, Angela is working with Dr. Gary Mills research program on constructed wetlands. Additional responsibilities include chemical coordinator for the Mills lab and...

147

Radionuclides in the terrestrial ecosystem near a Canadian uranium mill -- Part 3: Atmospheric deposition rates (pilot test)  

SciTech Connect

Atmospheric deposition rates of uranium series radionuclides were directly measured at three sites near the operating Key Lake uranium mill in northern Saskatchewan. Sites impacted by windblown tailings and mill dusts had elevated rates of uranium deposition near the mill and elevated {sup 226}Ra deposition near the tailings compared to a control site. Rainwater collectors, dust jars, and passive vinyl collectors previously used at the Ranger Mine in Australia were pilot-tested. Adhesive vinyl surfaces (1 m{sup 2}) were oriented horizontally, vertically, and facing the ground as a means of measuring gravitational settling, wind impaction, and soil resuspension, respectively. Although the adhesive glue on the vinyls proved difficult to digest, relative differences in deposition mode were found among radionuclides and among sites. Dry deposition was a more important transport mechanism for uranium, {sup 226}Ra, and {sup 210}Pb than rainfall, while more {sup 210}Po was deposited with rainfall.

Thomas, P.A.

2000-06-01T23:59:59.000Z

148

Tail use in bioinspired quadrupedal locomotion  

E-Print Network (OSTI)

Tails are seen in nature to be used in an amazing number of different applications. Many of these applications seen in nature may be of use to bioinspired roboticists in the future. I have provided a brief review of tail ...

Briggs, Randall (Randall Miller)

2012-01-01T23:59:59.000Z

149

Estimated dose to man from uranium milling via the terrestrial food-chain pathway  

SciTech Connect

One of the major pathways of radiological exposure to man from uranium milling operations is through the terrestrial food chain. Studies by various investigators have shown the extent of uptake and distribution of U-238, U-234, Th-230, Ra-226, Pb-210, and Po-210 in plants and animals. These long-lived natural radioisotopes, all nuclides of the uranium decay series, are found in concentrated amounts in uranium mill tailings. Data from these investigations are used to estimate the dose to man from consumption of beef and milk contaminated by the tailings. This dose estimate from this technologically enhanced source is compared with that from average normal dietary intake of these radionuclides from natural sources.

Rayno, D.R.

1982-01-01T23:59:59.000Z

150

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

11 - 22220 of 28,905 results. 11 - 22220 of 28,905 results. Article DOE to Transport Moab Mill Tailings by Rail Department Approves Project Baseline and Obtains Nuclear Regulatory Commission Nod http://energy.gov/articles/doe-transport-moab-mill-tailings-rail Article Revitalized Board Lays Out New Path amid EM's Recent Underground Tank Waste Successes IDAHO FALLS, Idaho - A board charged with advancing the cleanup of underground waste storage tanks met this month to establish new working groups and draw lessons from recent successes at the Savannah River and Idaho sites. http://energy.gov/em/articles/revitalized-board-lays-out-new-path-amid-em-s-recent-underground-tank Article Department of Energy Formally Commits $1 Billion in Recovery Act Funding to FutureGen 2.0 U.S. Energy Secretary Steven Chu today announced that the Department of

151

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 10340 of 28,905 results. 31 - 10340 of 28,905 results. Download NEPA Contracting Reform Guidance http://energy.gov/nepa/downloads/nepa-contracting-reform-guidance Article U-139: IBM Tivoli Directory Server Input Validation Flaw The Web Admin Tool does not properly filter HTML code from user-supplied input before displaying the input. http://energy.gov/cio/articles/u-139-ibm-tivoli-directory-server-input-validation-flaw Page EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah The Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Environmental Impact Statement and associated supplements and amendments provides information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate

152

Notices of Availability (NOA) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 23, 2004 December 23, 2004 EIS-0183: DOE Notice of Availability of the Record of Decision Hopkins Ridge Wind Interconnection Project December 17, 2004 EIS-0365: EPA Notice of Availability of the Final Environmental Impact Statement Imperial-Mexicali 230-kV Transmission Lines December 3, 2004 EIS-0355: DOE Notice of Availability of the Draft Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah November 23, 2004 EIS-0349: DOE Notice of Availability of the Record of Decision BP Cherry Point Cogeneration Project, Washington and Oregon November 12, 2004 EIS-0355: EPA Notification of Availability of the Draft Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah

153

The Mathematics of Mills College  

E-Print Network (OSTI)

The Mathematics of Doodling Mills College The Möbius Band November 12, 2010 #12;Doodle Warm-up Draw the nar- whal to Bonus Project #1! #12;Every Doodle is a Winding Road Problem: Suppose X is a convex

Easton, Robert W.

154

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

11 - 11120 of 28,905 results. 11 - 11120 of 28,905 results. Download Study of Factors Affecting Shrub Establishment on the Monticello, Utah, Disposal Cell Cover Study of Factors Affecting Shrub Establishment on the Monticello, Utah, Disposal Cell Cover http://energy.gov/lm/downloads/study-factors-affecting-shrub-establishment-monticello-utah-disposal Article DOE Signs Decision to Move Moab Tailings WASHINGTON, DC - U.S. Secretary of Energy Samuel W. Bodman today announced that a Record of Decision (ROD) clearing the way for the removal of 11.9 million tons of radioactive Uranium Mill Tailings... http://energy.gov/articles/doe-signs-decision-move-moab-tailings Page Long-Term Stewardship Related Information http://energy.gov/em/long-term-stewardship-related-information-0 Download Vulnerability Analysis of Energy Delivery Control Systems- 2011

155

Gas fluidized-bed stirred media mill  

DOE Patents (OSTI)

A gas fluidized-bed stirred media mill is provided for comminuting solid ticles. The mill includes a housing enclosing a porous fluidizing gas diffuser plate, a baffled rotor and stator, a hollow drive shaft with lateral vents, and baffled gas exhaust exit ports. In operation, fluidizing gas is forced through the mill, fluidizing the raw material and milling media. The rotating rotor, stator and milling media comminute the raw material to be ground. Small entrained particles may be carried from the mill by the gas through the exit ports when the particles reach a very fine size.

Sadler, III, Leon Y. (Tuscaloosa, AL)

1997-01-01T23:59:59.000Z

156

Enzymatic corn wet milling: engineering process and cost model  

Science Journals Connector (OSTI)

Enzymatic corn wet milling (E-milling) is a process derived from conventional wet milling for the recovery and purification of starch ... the total starch production in USA by conventional wet milling equaled 23 ...

Edna C Ramrez; David B Johnston; Andrew J McAloon

2009-01-01T23:59:59.000Z

157

John Stuart Mill's Sanction Utilitarianism: A Philosophical and Historical Interpretation  

E-Print Network (OSTI)

This dissertation argues for a particular interpretation of John Stuart Mills utilitarianism, namely that Mill is best read as a sanction utilitarian. In general, scholars commonly interpret Mill as some type of act or rule utilitarian. In making...

Wright, David

2014-04-24T23:59:59.000Z

158

Solutions to Yang-Mills equations  

E-Print Network (OSTI)

This article gives explicit solutions to the Yang-Mills equations. The solutions have positive energy that can be made arbitrarily small by selection of a parameter showing that Yang-Mills field theories do not have a mass gap.

Jorma Jormakka

2010-11-15T23:59:59.000Z

159

Gary Mills | Savannah River Ecology Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Mills Curriculum Vitae Faculty & Scientists SREL Home Gary Mills Savannah River Ecology Laboratory P O Drawer E, Aiken, SC 29802 (803) 725-5368 office (803) 725-3309 fax...

160

Design of a human powered maize mill  

E-Print Network (OSTI)

The process of milling corn into flour in many rural communities of East Africa has remained a traditional mortar and pestle process for centuries. Milling machines have failed in these communities largely due to poor ...

Salinas, Melvin Gustavo

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Delay tails in MapReduce scheduling  

Science Journals Connector (OSTI)

MapReduce/Hadoop production clusters exhibit heavy-tailed characteristics for job processing times. These phenomena are resultant of the workload features and the adopted scheduling algorithms. Analytically understanding the delays under different schedulers ... Keywords: MapReduce, coupling scheduler, fair scheduler, first in first out, hadoop, heavy-tails, processor sharing

Jian Tan; Xiaoqiao Meng; Li Zhang

2012-06-01T23:59:59.000Z

162

Active tails enhance arboreal acrobatics in geckos  

Science Journals Connector (OSTI)

...active tail in the legged-robot named RiSE (27), which can climb...was coated with latex-based paint after having cooled down to room...on the safety net with white paint and only used this section for video recording...an active tail on a climbing robot, and we anticipate their use...

Ardian Jusufi; Daniel I. Goldman; Shai Revzen; Robert J. Full

2008-01-01T23:59:59.000Z

163

Thermodynamics of the Yang-Mills gas  

Science Journals Connector (OSTI)

The contribution of nonlinear fluctuations (instantons) to the thermodynamics of the Yang-Mills gas at high temperature is estimated.

Barry J. Harrington and Harvey K. Shepard

1978-10-15T23:59:59.000Z

164

Standard Operating Procedure (SOP) -Milling Machine  

E-Print Network (OSTI)

Standard Operating Procedure (SOP) - Milling Machine · Keep all guards in place while operating the machine. · While operating the milling machine allow no one else to touch it. · Keep hands away from moving cutting tools. · Do not make measurements of the stock while the milling machine is powered. · Do

Veiga, Pedro Manuel Barbosa

165

Engineering assessment of inactive uranium mill tailings, Belfield Site, Belfield, North Dakota  

SciTech Connect

Ford, Bacon and Davis Utah Inc. has evaluated the Belfield site in order to assess the problems resulting from the existence of radiactive ash at Belfield, South Dakota. This engineering assessment has included drilling of boreholes and radiometric measurements sufficient to determine areas and volumes of ash and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actons. Radon gas released from the 55,600 tons of ash and contaminated material at the Belfield site constitutes a significant environmental impact, although external gamma radiation also is a factor. The four alternative actions presented in this engineering assessment range from millsite and off-site decontamination with the addition of 3 m of stabilization cover material, to removal of the ash and contaminated materials to remote disposal sites, and decontamination of the Belfield site. Cost estimates for the four options range from about $1,500,000 for stabilization in-place, to about $2,500,000 for disposal at a distance of about 17 mi from the Belfield site. Reprocessing the ash for uranium recovery is not feasible because of the extremely small amount of material available at the site and because of its low U/sub 3/O/sub 8/ content.

Not Available

1981-11-01T23:59:59.000Z

166

A case against Kd-based transport models: natural attenuation at a mill tailings site  

Science Journals Connector (OSTI)

This study compares numerical modeling results of contaminant transport using a multi-component coupled reactive mass transport model and a distribution coefficient (Kd)-based transport model. The study site is a contaminated groundwater ... Keywords: contaminant, coupled processes, geochemical modeling, transport

Chen Zhu

2003-04-01T23:59:59.000Z

167

EM News Flashes | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 21, 2013 June 21, 2013 Associate Principal Deputy Assistant Secretary Alice Williams, left, and EM Senior Advisor Dave Huizenga, center, talk with Environmental Management Advisory Board Vice-Chair Dennis Ferrigno at the recent board meeting. EM Reviews Budget, Technology Challenges with Advisory Board EM leadership met with the Environmental Management Advisory Board (EMAB) recently to discuss a range of topics, from EM's fiscal year 2014 budget request to its technology challenges. June 20, 2013 At Tuesday's Grand County Council meeting in Utah, Moab Federal Project Director Donald Metzler, center, moves a piece from a plaque representing Moab's uranium mill tailings pile to a plaque representing the disposal cell in recognition of the site achieving a milestone by shipping 6 million tons of the tailings. Grand County Council Chair Gene Ciarus is on the left and Grand County Council Vice Chair Lynn Jackson is on the right.

168

Photo of the Week: 2013 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Photo of the Week: 2013 Photo of the Week: 2013 Photo of the Week: 2013 Addthis An Express Train to Crescent Junction 1 of 45 An Express Train to Crescent Junction In the 1950s, one of the largest uranium deposits in the U.S. was found near Moab, Utah. The Department of Energy began cleaning up the uranium mill tailings from the Moab Site in April 2009, using steel containers to transport more than five million tons of tailings for safe disposal near Crescent Junction, Utah. In this May 2012 photo, one of the trains is shown on the Union Pacific Railroad in Utah, passing a butte capped by a familiar southwest U.S. rock formation known as Navajo Sandstone. Image: Department of Energy Date taken: 2013-01-04 09:00 I, Robot Olympics 2 of 45 I, Robot Olympics Last week, students from dozens of local Tennessee high schools gathered at

169

Ohio | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 7, 2011 December 7, 2011 CX-007407: Categorical Exclusion Determination Advanced Floating Turbine CX(s) Applied: A9 Date: 12/07/2011 Location(s): Ohio Offices(s): Golden Field Office November 4, 2011 DOE Awards Contract for Moab Mill Tailings Cleanup Cincinnati- The Department of Energy (DOE) announced today that it has awarded a competitive small business contract worth $121.2 million over the next five years as part of the Department's continued efforts to protect the Colorado River and downstream water users by removing uranium tailings at the former Atlas uranium-ore processing facility in Moab, Utah. Portage, Inc., a small business based in Idaho Falls, Idaho, will be leading the new contract. October 12, 2011 CX-007107: Categorical Exclusion Determination Development of Novel Carbon Sorbents for Carbon Dioxide Capture

170

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21 - 21830 of 28,905 results. 21 - 21830 of 28,905 results. Article Hanford Selects Small Business for $99M Contract Small businesses are the backbone of our economy, employing half of all workers in America and creating two out of every three new jobs in the U.S. http://energy.gov/diversity/articles/hanford-selects-small-business-99m-contract Article DOE Awards Contract for Moab Mill Tailings Cleanup Cincinnati- The Department of Energy (DOE) announced today that it has awarded a competitive small business contract worth $121.2 million over the next five years as part of the Department's continued efforts to protect the Colorado River and downstream water users by removing uranium tailings at the former Atlas uranium-ore processing facility in Moab, Utah. Portage, Inc., a small business based in Idaho Falls, Idaho, will be

171

A Dynamic Twist in the Tail  

Science Journals Connector (OSTI)

...the draped field magnetotail of Venus will change the topology of the magnetic fields near the planet and channel solar wind energy to the nightside ionosphere in a manner not previously envisioned. For example, this tail reconnection is expected...

James A. Slavin

2012-05-04T23:59:59.000Z

172

Online SAG Mill Pluse Measurement and Optimization  

SciTech Connect

The grinding efficiency of semi autogenous milling or ball milling depends on the tumbling motion of the total charge within the mill. Utilization of this tumbling motion for efficient breakage of particles depends on the conditions inside the mill. However, any kind of monitoring device to measure the conditions inside the mill shell during operation is virtually impossible due to the severe environment presented by the tumbling charge. An instrumented grinding ball, which is capable of surviving a few hours and transmitting the impacts it experiences, is proposed here. The spectrum of impacts collected over 100 revolutions of the mills presents the signature of the grinding environment inside mill. This signature could be effectively used to optimize the milling performance by investigating this signature's relation to mill product size, mill throughput, make-up ball size, mill speed, liner profile and ball addition rates. At the same time, it can also be used to design balls and liner systems that can survive longer in the mill. The technological advances made in electronics and communication makes this leap in instrumentation certainly viable. Hence, the instrumented grinding ball offers the ability to qualitatively observe and optimize the milling environment. An instrumented load cell package that can measure the force of impacts inside the grinding chamber of a mill is developed here. The signal from the instrumented load cell package is interpreted in terms of a histogram termed as an impact spectrum which is a plot of the number of impacts at a specific energy level against the energy. It reflects on the average force regime of the mill. The instrumented load cell package was calibrated against the ultra fast load cell which has been unanimously accepted as a standard to measure single breakage events. The load cell package was successfully used to produce impact spectra in an 8.5 inch lab scale mill. The mill speed and the ball size were varied to study their effect on the impact spectra. A good correlation was found between the process variables and the impact spectra. The load cell package was then used in a 16 inch pilot scale mill. The mill speed, ball size, and mill filling were varied here and a consistent trend between these variables and impact spectra was observed. With a better understanding developed from the initial tests, the design of the load cell package was significantly changed to eliminate noise. With the new design, the impact spectra were re-determined in the 16 inch pilot mill varying the process variables - ball size, mill speed, and mill filling. Finally, it is successfully shown that a change in the operating variables of a mill can be seen in the impact spectra and that this concept can be successfully developed to monitor the grinding operation of industrial mills. To adapt it to industrial level it is mandatory to make the load cell package wireless. A design of a wireless circuit that is capable of transferring data at the required speed of 1000 kbps was also developed and tested at Cortez Gold Mines (CGM), Nevada.

Raj Rajamani; Jose Delgadillo; Vishal Duriseti

2007-06-30T23:59:59.000Z

173

The Bowersock Mills and Power Company 1874  

NLE Websites -- All DOE Office Websites (Extended Search)

Incremental Hydroelectric Energy The Bowersock Mills and Power Co., Lawrence, KS Hydroelectric Energy Potential for U.S. BMPC Plant At Forefront of Development Curve "In our...

174

Colony Mills Limited | Open Energy Information  

Open Energy Info (EERE)

Limited Place: Lahore, Pakistan Sector: Solar Product: Yarn manufacturer, plans to set up solar thermal plant. References: Colony Mills Limited1 This article is a stub. You can...

175

Welcome to Cotton Mills At Cotton Mills, we believe your accommodation should help you make the most of your  

E-Print Network (OSTI)

Welcome to Cotton Mills At Cotton Mills, we believe your accommodation should help you make to an amazing £1,200 per annum. Cotton Mills is fully certificated by: Cotton Mills is fully certificated. Cotton Mills is conveniently located on Radford Boulevard, right next to Norton Court (NTU accommodation

Evans, Paul

176

Virtual cutter path display for dental milling machine  

E-Print Network (OSTI)

This paper presents the prototype of a mixed reality system using the computer controlled dental milling machine, which is called MRD Mill. First, overview of the core dental milling machine developed in this study is ...

Ito, Teruaki

177

Radiological health aspects of uranium milling  

SciTech Connect

This report describes the operation of conventional and unconventional uranium milling processes, the potential for occupational exposure to ionizing radiation at the mill, methods for radiological safety, methods of evaluating occupational radiation exposures, and current government regulations for protecting workers and ensuring that standards for radiation protection are adhered to. In addition, a survey of current radiological health practices is summarized.

Fisher, D.R.; Stoetzel, G.A.

1983-05-01T23:59:59.000Z

178

DOE - Office of Legacy Management -- Belfield Mill Site - ND...  

Office of Legacy Management (LM)

Belfield Mill Site - ND 0-01 FUSRAP Considered Sites Site: Belfield Mill Site (ND.0-01 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site...

179

TIDAL TAILS OF MINOR MERGERS: STAR FORMATION EFFICIENCY IN THE WESTERN TAIL OF NGC 2782  

SciTech Connect

While major mergers and their tidal debris are well studied, they are less common than minor mergers (mass ratios {approx}< 0.3). The peculiar spiral NGC 2782 is the result of a merger between two disk galaxies with a mass ratio of {approx}4: 1 occurring {approx}200 Myr ago. This merger produced a molecular and H I-rich, optically bright eastern tail and an H I-rich, optically faint western tail. Non-detection of CO in the western tail by Braine et al. suggested that star formation had not yet begun to occur in that tidal tail. However, deep H{alpha} narrowband images show evidence of recent star formation in the western tail. Across the entire western tail, we find the global star formation rate per unit area ({Sigma}{sub SFR}) to be several orders of magnitude less than expected from the total gas density. Together with extended FUV+NUV emission from Galaxy Evolution Explorer along the tail, this indicates a low global star formation efficiency in the tidal tail producing lower mass star clusters. The H II region that we observed has a local (few-kiloparsec scale) {Sigma}{sub SFR} from H{alpha} that is less than that expected from the total gas density, which is consistent with other observations of tidal debris. The star formation efficiency of this H II region inferred from the total gas density is low, but normal when inferred from the molecular gas density. These results suggest the presence of a very small, locally dense region in the western tail of NGC 2782 or of a low-metallicity and/or low-pressure star-forming region.

Knierman, Karen; Scowen, Paul; Jansen, Rolf A. [School of Earth and Space Exploration, Arizona State University, 550 East Tyler Mall, Room PSF-686 (P.O. Box 871404), Tempe, AZ 85287-1404 (United States); Knezek, Patricia M. [WIYN Consortium, Inc., 950 North Cherry Avenue, Tucson, AZ 85719 (United States); Wehner, Elizabeth, E-mail: karen.knierman@asu.edu, E-mail: paul.scowen@asu.edu, E-mail: rolf.jansen@asu.edu, E-mail: pknezek@noao.edu, E-mail: ewehner@haverford.edu [Department of Astronomy, Haverford College, Haverford, PA 19041 (United States)

2012-04-10T23:59:59.000Z

180

Asymptotic Analysis of Multivariate Tail Conditional Expectations  

E-Print Network (OSTI)

instruments so that the resulting position (X) - X is acceptable to regulators/supervisors. The coherent risk related to various coherent risk measures. In the univari- ate case, the tail conditional expectation is asymptotically proportional to the value-at-risk, a popular risk measure. The focus of this paper

Li, Haijun

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Asymptotic Analysis of Multivariate Tail Conditional Expectations  

E-Print Network (OSTI)

instruments so that the resulting position (X) - X is acceptable to regulators/supervisors. The coherent risk and are closely related to various coherent risk measures. In the univari- ate case, the tail conditional expectation is asymptotically proportional to the value-at-risk, a popular risk measure. The focus

Li, Haijun

182

Wet Corn Milling Energy Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

307 307 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY Energy Efficiency Improvement and Cost Saving Opportunities for the Corn Wet Milling Industry An ENERGY STAR Guide for Energy and Plant Managers Christina Galitsky, Ernst Worrell and Michael Ruth Environmental Energy Technologies Division Sponsored by the U.S. Environmental Protection Agency July 2003 Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product,

183

PERFORMANCE MODEL FOR MULTIBLADED WATER-PUMPING WIND-MILLS  

Science Journals Connector (OSTI)

ABSTRACT The steady and the dynamic equilibrium of a multibladed water-pumping wind-mill has been studied under the assumption of a simple model. Good agreement has been found between theoretical and experimental results. KEYWORDS Wind energy; water-pumping wind-mills; wind-mill design; wind-mill test; performance optimization.

R. Pallabazzer

1986-01-01T23:59:59.000Z

184

Final environmental statement related to the Western Nuclear, Inc. , Split Rock Uranium Mill (Fremont County, Wyoming)  

SciTech Connect

The proposed action is the renewal of Source Material License SUA-56 (with amendments) issued to Western Nuclear, Inc. (WNI), for the operation of the Split Rock Uranium Mill near Jeffrey City and the Green Mountain Ion-Exchange Facility, both in Fremont County, Wyoming. The license also permits possession of material from past operations at four ancillary facilities in the Gas Hills mining area - the Bullrush, Day-Loma, Frazier-Lamac, and Rox sites (Docket No. 40-1162). However, although heap leaching operations were previously authorized at Frazier-Lamac, there has never been any processing of material at this site. The Split Rock mill is an acid-leach, ion-exchange and solvent-extraction uranium-ore processing mill with a design capacity of 1540 MT (1700 tons) of ore per day. WNI has proposed by license amendment request to increase the storage capacity of the tailings ponds in order to permit the continuation of present production rates of U/sub 3/O/sub 8/ through 1996 using lower-grade ores.

Not Available

1980-02-01T23:59:59.000Z

185

Mille Lacs Energy Cooperative | Open Energy Information  

Open Energy Info (EERE)

Mille Lacs Energy Cooperative Mille Lacs Energy Cooperative (Redirected from Mille Lacs Electric Coop) Jump to: navigation, search Name Mille Lacs Energy Cooperative Place Minnesota Utility Id 12546 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Dual Fuel Space Heating Rate Electric Combination Heating Rate Freedom Heating Rate Residential General Service Residential Green Power Energy Large Power Commercial Large Power - Industrial Industrial Light - 100 watt HPS Lighting Light - 150 watt HPS Lighting

186

Otter Tail Power Co | Open Energy Information  

Open Energy Info (EERE)

Otter Tail Power Co Otter Tail Power Co Place Minnesota Utility Id 14232 Utility Location Yes Ownership I NERC Location MISO NERC MRO Yes Operates Generating Plant Yes Activity Generation Yes Activity Transmission Yes Activity Buying Transmission Yes Activity Distribution Yes Activity Wholesale Marketing Yes Activity Bundled Services Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] Energy Information Administration Form 826[2] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png COGENERATION PURCHASE RATE Commercial Civil Defense - Fire Sirens Commercial Farm Service Single Phase Commercial

187

Lightning prevention systems for paper mills  

SciTech Connect

Paper mills are increasingly relying on sensitive electronic equipment to control their operations. However, the sensitivity of these devices has made mills vulnerable to the effects of lightning strokes. An interruption in the power supply or the destruction of delicate microcircuits can have devastating effects on mill productivity. The authors discuss how lightning strokes can be prevented by a Dissipation Array system (DAS). During the past 17 years, the concept has been applied to a host of applications in regions with a high incidence of lightning activity. With nearly 700 systems now installed, more than 4000 system-years of history have been accumulated. Areas as large as 1 km{sup 2} and towers as high as 2000 ft have been protected and completely isolated from lightning strokes. There have been very few failures, and in every case, the cause of the failure was determined and corrected.

Carpenter, R.B. Jr. (Lightning Eliminators and Consultants, Santa Fe Springs, CA (US))

1989-05-01T23:59:59.000Z

188

Otter Tail Power Company - Commercial and Industrial Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Otter Tail Power Company - Commercial and Industrial Energy Otter Tail Power Company - Commercial and Industrial Energy Efficiency Grant Program Otter Tail Power Company - Commercial and Industrial Energy Efficiency Grant Program < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Other Heat Pumps Manufacturing Appliances & Electronics Program Info State Minnesota Program Type Utility Grant Program Rebate Amount Varies Provider Customer Service Otter Tail Power Company Grants for Conservation Program allows its commercial and industrial customers to submit energy-saving proposals and receive grants for their custom efficiency projects. Possibilities include but are not limited to:

189

The mobility of petroleum hydrocarbons in Athabasca oil sands tailings.  

E-Print Network (OSTI)

??Several oil sands tailings from Suncor Energy Inc. were analysed with respect to the mobility and solubility of the petroleum hydrocarbon (PHC) contaminants. At sites (more)

Brickner, Heather

2014-01-01T23:59:59.000Z

190

Free Energy Analysis of Lipid Tail Protrusions from Atomistic...  

NLE Websites -- All DOE Office Websites (Extended Search)

Free Energy Analysis of Lipid Tail Protrusions from Atomistic Molecular Dynamics Simulations Event Sponsor: Mathematics and Computing Science - LANS Seminar Start Date: Oct 29 2014...

191

Numerical simulations of a vertical tail of a commercial aircraft...  

NLE Websites -- All DOE Office Websites (Extended Search)

of a commercial aircraft with active flow control Authors: Rasquin, M., Martin, J., Jansen, K. A series of numerical simulations of a realistic vertical tail of a commercial...

192

Environmental Impact Statements (EIS) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 25, 2005 November 25, 2005 EIS-0372: Final Environmental Impact Statement Bangor Hydro-Electric Company (BHE) Northeast Reliability Interconnect September 1, 2005 EIS-0351: Final Environmental Impact Statement Operation of Flaming Gorge Dam August 26, 2005 EIS-0372: Draft Environmental Impact Statement Bangor Hydro-Electric Company (BHE) Northeast Reliability Interconnect August 5, 2005 EIS-0355: Final Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah July 1, 2005 EIS-0353: Final Environmental Impact Statement South Fork Flathead Watershed Westslope Cutthroat Trout Conservation Program April 29, 2005 EIS-0348: Final Site-wide Environmental Impact Statement Continued Operation of Lawrence Livermore National Laboratory and

193

DOE - Office of Legacy Management -- Bowman Mill Site - ND 0...  

Office of Legacy Management (LM)

Bowman Mill Site - ND 0-02 FUSRAP Considered Sites Site: Bowman Mill Site (ND.0-02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition:...

194

De-dusting Filter Bags Reduce Indian Petcoke Mill Emissions  

Science Journals Connector (OSTI)

BWF Envirotec has installed more than 400 filter bags in a pulse jet clean filter system at an Indian industrial mill producing petroleum coke, a fuel commonly used in rotary kilns for cement production. The pulse jet filter separates the fine grain petcoke product from the exhaust gases escaping out of the mill. The installation by the German-based company has reduced the mills measured emissions over the last nine months to under 10 mg/Nm3.

2003-01-01T23:59:59.000Z

195

THE NARROW X-RAY TAIL AND DOUBLE H? TAILS OF ESO 137-002 IN A3627  

SciTech Connect

We present the analysis of a deep Chandra observation of a ?2 L{sub *} late-type galaxy, ESO 137-002, in the closest rich cluster A3627. The Chandra data reveal a long (?>40 kpc) and narrow tail with a nearly constant width (?3 kpc) to the southeast of the galaxy, and a leading edge ?1.5 kpc from the galaxy center on the upstream side of the tail. The tail is most likely caused by the nearly edge-on stripping of ESO 137-002's interstellar medium (ISM) by ram pressure, compared to the nearly face-on stripping of ESO 137-001 discussed in our previous work. Spectral analysis of individual regions along the tail shows that the gas throughout it has a rather constant temperature, ?1 keV, very close to the temperature of the tails of ESO 137-001, if the same atomic database is used. The derived gas abundance is low (?0.2 solar with the single-kT model), an indication of the multiphase nature of the gas in the tail. The mass of the X-ray tail is only a small fraction (<5%) of the initial ISM mass of the galaxy, suggesting that the stripping is most likely at an early stage. However, with any of the single-kT, double-kT, and multi-kT models we tried, the tail is always 'over-pressured' relative to the surrounding intracluster medium (ICM), which could be due to the uncertainties in the abundance, thermal versus non-thermal X-ray emission, or magnetic support in the ICM. The H? data from the Southern Observatory for Astrophysical Research show a ?21 kpc tail spatially coincident with the X-ray tail, as well as a secondary tail (?12 kpc long) to the east of the main tail diverging at an angle of ?23 and starting at a distance of ?7.5 kpc from the nucleus. At the position of the secondary H? tail, the X-ray emission is also enhanced at the ?2? level. We compare the tails of ESO 137-001 and ESO 137-002, and also compare the tails to simulations. Both the similarities and differences of the tails pose challenges to the simulations. Several implications are briefly discussed.

Zhang, B.; Lin, X. B.; Kong, X. [Center for Astrophysics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Sun, M. [Department of Physics, University of Alabama in Huntsville, Huntsville, AL 35899 (United States); Ji, L. [Purple Mountain Observatory, Chinese Academy of Sciences, Nanjing, Jiangsu 210008 (China); Sarazin, C. [Department of Astronomy, University of Virginia, P.O. Box 400325, Charlottesville, VA 22904-4325 (United States); Nulsen, P. E. J.; Forman, W.; Jones, C. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Roediger, E. [Germany Hamburger Sternwarte, Universitt Hamburg, Gojensbergsweg 112, D-21029 Hamburg (Germany); Donahue, M.; Voit, G. M., E-mail: xkong@ustc.edu.cn, E-mail: mingsun.cluster@gmail.com [Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States)

2013-11-10T23:59:59.000Z

196

Original article Impact of spreading olive mill wastewater on soil  

E-Print Network (OSTI)

Original article Impact of spreading olive mill wastewater on soil characteristics: laboratory 2001) Abstract ­ A dynamic of soil pollution with olive mill wastewater (OMW) was investigated process forms an olive mill wastewater (OMW). The amount of this waste depends on the process used for oil

Paris-Sud XI, Université de

197

Old mills, new condos; sound isolation in mill building conversion projects  

Science Journals Connector (OSTI)

Up and down the New England Coast century?old mill buildings are being converted into condominium and apartment buildings amidst one of the biggest housing booms in recent memory. While the inherent acoustical conflicts in multi?family dwelling are not new (oft?cited HUD guidelines are approaching their 40th birthday) the flood of mill conversions is bringing to light a number of new constructions that architects use to chop former factories into discrete living spaces. This paper will present field?collected data and case studies that illustrate some of the problems and common pitfalls associated with mill building conversion projects. Among the construction details discussed include exposed timber ceilings that run continuously across gypsum board partitions the creative reuse of existing brick walls and some acoustical properties of wood deck construction common to many mill buildings.

2006-01-01T23:59:59.000Z

198

The effect of conditioning rice during the laboratory milling process on the quality of the milled sample  

E-Print Network (OSTI)

THE EFFECT OF CONDITIONING RICE DURING THE LABORATORY MILLING PROCESS ON THE QUALITY OF THE MILLED SAMPLE A Thesis by ROY EUGENE CHILDERS, JR. Submitted to the Graduate College of Texas A8M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1972 Major Subject: Agricultural Engineering THE EFFECT OF CONDITIONING RICE DURING THE LABORATORY MILLING PROCESS ON THE I1UALITY OF THE MILLED SAMPLE A Thesis by ROY EUGENE CHILDERS, JR...

Childers, Roy Eugene

2012-06-07T23:59:59.000Z

199

Lymphatic Pathways from the Tail in Rats and Mice  

Science Journals Connector (OSTI)

...from the Tail in Rats and Mice Arnfinn Engeset * Enok Tjotta ( Norsk Hydro's Institute for Cancer Research, Norwegian Radium Hospital...from the Tail in Rats and Mice ARNFINNENGESET*ANDENOKTJ TTA (Norsk Hydro's Institute for Cancer Research, Norwegian Radium Hospital...

Arnfinn Engeset and Enok Tjtta

1960-06-01T23:59:59.000Z

200

Accelerated Carbonation of Brucite in Mine Tailings for Carbon Sequestration  

Science Journals Connector (OSTI)

Atmospheric CO2 is sequestered within ultramafic mine tailings via carbonation of Mg-bearing minerals. ... If carbonation of bulk tailings were accelerated, large mines may have the capacity to sequester millions of tonnes of CO2 annually, offsetting mine emissions. ... A Greenhouse-Scale Photosynthetic Microbial Bioreactor for Carbon Sequestration in Magnesium Carbonate Minerals ...

Anna L. Harrison; Ian M. Power; Gregory M. Dipple

2012-07-06T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Tail Risk of Multivariate Regular Variation Third Revision, May 2010  

E-Print Network (OSTI)

that the resulting position (X) - X is acceptable to regulators/supervisors. The general theory of coherent riskTail Risk of Multivariate Regular Variation Harry Joe Haijun Li Third Revision, May 2010 Abstract Tail risk refers to the risk associated with extreme values and is often affected by extremal

Li, Haijun

202

Ashtabula - Otter Tail Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Ashtabula - Otter Tail Wind Farm Ashtabula - Otter Tail Wind Farm Facility Ashtabula - Otter Tail Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Otter Tail Power Co. Developer NextEra Energy Resources Energy Purchaser Otter Tail Power Co. Location Northeastern Barnes County- ND ND Coordinates 47.123021°, -97.895° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":47.123021,"lon":-97.895,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

203

Final programmatic environmental impact statement for the uranium mill tailings remedial action ground water project. Volume II  

SciTech Connect

Volume II of the programmatic environmental impact statement (PElS) is a comment and response document; it is the collection of the comments received on the draft PElS. The U.S. Department of Energy's (DOE) response to each comment is provided after each comment. If the comment resulted in a change to the PElS, the affected section number of the PElS is provided in the response. Comments 1 through 259 were received at public hearings. The name of the hearing at which the comment was received is listed after each comment. Comments were recorded on flip charts and by notetakers. DOE representatives were present to hear the comments and respond to them. The DOE's written response is provided after each comment. Comments 260 through 576 were received in writing at the hearings, and from various federal, tribal, and state agencies and from individuals during the public comment period. Copies of the written comments follow the comments and responses.

none,

1996-10-01T23:59:59.000Z

204

Remedial action plan and site design for stabilization of the inactive uranium mill tailings sites at Rifle, Colorado: Final report  

SciTech Connect

This volume contains Appendix F, bid schedule and specifications for remedial action on three sites: Old Rifle processing site; New Rifle processing site and Estes Gulch disposal site.

Not Available

1992-02-01T23:59:59.000Z

205

Mitigation action plan for remedial action at the Uranium Mill Tailing Sites and Disposal Site, Rifle, Colorado  

SciTech Connect

The Estes Gulch disposal site is approximately 10 kilometers (6 miles) north of the town of Rifle, off State Highway 13 on Federal land administered by the Bureau of Land Management. The Department of Energy (DOE) will transport the residual radioactive materials (RRM) by truck to the Estes Gulch disposal site via State Highway 13 and place it in a partially below-grade disposal cell. The RRM will be covered by an earthen radon barrier, frost protection layers, and a rock erosion protection layer. A toe ditch and other features will also be constructed to control erosion at the disposal site. After removal of the RRM and disposal at the Estes Gulch site, the disturbed areas at all three sites will be backfilled with clean soils, contoured to facilitate surface drainage, and revegetated. Wetlands areas destroyed at the former Rifle processing sites will be compensated for by the incorporation of now wetlands into the revegetation plan at the New Rifle site. The UMTRA Project Office, supported by the Remedial Action Contractor (RAC) and the Technical Assistance Contractor (TAC), oversees the implementation of the MAP. The RAC executes mitigation measures in the field. The TAC provides monitoring of the mitigation actions in cases where mitigation measures are associated with design features. Site closeout and inspection compliance will be documented in the site completion report.

Not Available

1992-07-01T23:59:59.000Z

206

Uranium Mill Tailings Remedial Action Project (UMTRAP), Slick Rock, Colorado, Revision 1. Volume 2, Calculations, Final design for construction  

SciTech Connect

Volume two contains calculations for: embankment design--slope stability analysis; embankment design--excavation stability; embankment design--settlement and cover cracking analysis; radon barrier design--statistical analysis of ra-226 concentrations for North Continent and Union Carbide sites; radon barrier design--RAECOM input data; radon barrier design--design thickness; and cover design--frost penetration depth.

NONE

1995-09-01T23:59:59.000Z

207

Evaluation of Wind-Induced Resuspension on the Performance of a Mine Tailings Storage Facility.  

E-Print Network (OSTI)

??Proper management of sulphide rich reactive mine tailings is a growing concern for mining industries. Oxidation of tailings can release acids and toxic metals into (more)

Kachhwal, Laxmi Kant

2011-01-01T23:59:59.000Z

208

Geothermal Mill Redevelopment Project in Massachusetts  

SciTech Connect

Anwelt Heritage Apartments, LLC redeveloped a 120-year old mill complex into a mixed-use development in a lower-income neighborhood in Fitchburg, Massachusetts. Construction included 84 residential apartments rented as affordable housing to persons aged 62 and older. The Department of Energy (DOE) award was used as an essential component of financing the project to include the design and installation of a 200 ton geothermal system for space heating and cooling.

Vale, A.Q.

2009-03-17T23:59:59.000Z

209

Corn Wet Milling: Separation Chemistry and Technology  

Science Journals Connector (OSTI)

Publisher Summary This chapter focuses on the separation chemistry and technology of corn wet milling. The purpose of corn wet milling is to separate the kernel into its constituent chemical components. Wet milling processing begins with steeping whole kernel corn in an aqueous solution of sulfur dioxide and lactic acid (produced by microorganisms) at 50C for 2448 hours. The corn is then coarsely ground and the lipid-containing germ and fibrous hull portions are separated. After the remaining components are more finely ground, the starch and protein are separated using hydrocyclones, essentially continuous centrifuges; corn starch is slightly denser than corn protein. Germ is further processed into oil and the protein and fiber components are usually blended and used as animal feeds. The wet starch is either dried, chemically modified to change its functional properties, converted into intermediate-sized glucose polymers, or fully depolymerized into sugars. Starch is also often used as a raw ingredient for adjacent processing facilities that produce ethanol or other alcohols and other industrial chemicals.

David S. Jackson; Donald L. Shandera Jr.

1995-01-01T23:59:59.000Z

210

Reduction of unsteady underwater propeller forces via active tail articulation  

E-Print Network (OSTI)

This study investigates the use of biologically-inspired tail articulation as a means to reduce unsteady propeller forces and by extension, noise due to stator wake blade interaction. This study is experimental in nature ...

James, Richard A. (Richard Alexander), 1982-

2006-01-01T23:59:59.000Z

211

Western Red-tailed Skink Distribution in Southern Nevada  

SciTech Connect

This slide show reports a study to: determine Western Red-tailed Skink (WRTS) distribution on Nevada National Security Site (NNSS); identify habitat where WRTS occur; learn more about WRTS natural history; and document distribution of other species.

Hall, D. B. and Gergor, P. D.

2011-11-01T23:59:59.000Z

212

Otter Tail Power Company- Residential Energy Efficiency Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

Otter Tail Power Company offers incentives to all residential customers in South Dakota to install energy efficient equipment in residences. Rebates are available for geothermal and air source heat...

213

Microbiological and Geochemical Characterization of Fluvially Deposited Sulfidic Mine Tailings  

Science Journals Connector (OSTI)

...investigation final report/ground water and tailings investigation...been overlooked when remediation strategies for metal...geochemistry geomicrobiology ground water heavy metals heterogeneity...pollutants pollution remediation sediments Silver Bow...

Bruce Wielinga; Juliette K. Lucy; Johnnie N. Moore; October F. Seastone; James E. Gannon

1999-04-01T23:59:59.000Z

214

Mailuu-Suu Tailings problems and options for remediation  

Science Journals Connector (OSTI)

The area of the town of Mailuu Suu, Kyrgyzstan, is polluted by ra-dionucldes ... the historic exploitation of U-mines in the Mailuu Suu area in Kyrgyzstan. Radioactive substances are stored ... three tailings an...

Hildegarde Vandenhove; Jean Jacques Clerc

2002-01-01T23:59:59.000Z

215

Texas white-tailed deer Internet harvest model  

E-Print Network (OSTI)

in Texas?????????????????????... 4 2 Counties within the Edwards Plateau Ecological Region of Texas, Armstrong and Young 2000??????????????????? 9 3 Conceptual diagram of the general structure of the Texas Deer Manager (TDM), 2006...-tailed deer (Odocoileus virginianus) is one of the most recognizable and sought after wildlife game species in North America (Xie et al. 1999). In Texas, there are an estimated 4 million white-tailed deer (WTD) (Armstrong and Young 2000), which provides...

Garrett, Jennifer Nicole

2009-05-15T23:59:59.000Z

216

PSR J0357+3205: THE TAIL OF THE TURTLE  

SciTech Connect

Using a new XMM-Newton observation, we have characterized the X-ray properties of the middle-aged radio-quiet {gamma}-ray pulsar J0357+3205 (named Morla) and its tail. The X-ray emission from the pulsar is consistent with a magnetospheric non-thermal origin plus a thermal emission from a hot spot (or hot spots). The lack of a thermal component from the whole surface makes Morla the coldest neutron star in its age range. We found marginal evidence for a double-peaked modulation of the X-ray emission. The study of the 9' long tail confirmed the lack of extended emission near the pulsar itself. The tail shows a very asymmetric brightness profile and its spectrum lacks any spatial variation. We found the nebular emission to be inconsistent with a classical bow shock, ram-pressure-dominated pulsar wind nebula. We propose thermal bremsstrahlung as an alternative mechanism for Morla's tail emission. In this scenario, the tail emission comes from the shocked interstellar medium (ISM) material heated up to X-ray temperatures. This can fully explain the peculiar features of the tail, assuming a hot, moderately dense ISM around the pulsar. For a bremsstrahlung-emitting tail, we can estimate the pulsar distance to be between 300 and 900 pc. A pulsar velocity of {approx}1900 km s{sup -1} is required, which would make Morla the pulsar with the largest velocity, and high inclination angles (>70 Degree-Sign ) are preferred. We propose Morla's nebula as the first example of a new 'turtle's tail' class of thermally emitting nebulae associated with high-velocity pulsars.

Marelli, M.; De Luca, A.; Salvetti, D.; Sartore, N.; Sartori, A.; Caraveo, P.; Pizzolato, F.; Belfiore, A. [INAF-Istituto di Astrofisica Spaziale e Fisica Cosmica Milano, via E. Bassini 15, I-20133 Milano (Italy)] [INAF-Istituto di Astrofisica Spaziale e Fisica Cosmica Milano, via E. Bassini 15, I-20133 Milano (Italy); Saz Parkinson, P. M., E-mail: marelli@iasf-milano.inaf.it [Santa Cruz Institute for Particle Physics, University of California, Santa Cruz, CA 95064 (United States)

2013-03-01T23:59:59.000Z

217

Raw Cotton Requirements of Textile Mills: Implications for Southwestern Cotton.  

E-Print Network (OSTI)

B-1072 December 1967 Raw Cotton Requirements of Tmtile Mills Implications for Southwestern Cotton TEXAS A&M UNIVERSITY TEXAS AGRICULTURAL EXPERIMENT STATION H. 0. Kunkel, Acting Director, College Station, Texas Summary During the summer... inch averaged 3.8 million bales. During this same period, annual domestic mill consumption of cotton under 1 inch ranged from 1.2 to 1.6 million bales. Exports of this cotton have remained at approximately the same level as domestic mill...

Graves, James W. (James Wilson)

1967-01-01T23:59:59.000Z

218

Langdon II - Otter Tail Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Langdon II - Otter Tail Wind Farm Langdon II - Otter Tail Wind Farm Facility Langdon II - Otter Tail Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Otter Tail Power Co. Developer NextEra Energy Resources/Otter Tail Power Co. Energy Purchaser Otter Tail Power Co. Location Cavalier County ND Coordinates 48.687255°, -98.309298° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.687255,"lon":-98.309298,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

219

DOE - Office of Legacy Management -- Cincinnati Milling and Machining...  

Office of Legacy Management (LM)

of Ohio Memorandum; Ruhe to Quigley; Subject: Trip Report to Cincinnati Milling Machine Company, Cincinnati, Ohio on September 17, 1963; October 7, 1963 OH.25-2 - DOE...

220

Comments of Mille Lacs Energy Cooperative | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

the National Broadband Plan by Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policy Comments of Mille Lacs Energy Cooperative More...

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Feeding Corn Milling Byproducts to Feedlot Cattle  

Science Journals Connector (OSTI)

Corn milling byproducts are expected to increase dramatically in supply as the ethanol industry expands. Distillers grains, corn gluten feed, or a combination of both byproducts offer many feeding options when included in feedlot rations. These byproduct feeds may effectively improve cattle performance and operation profitability. When these byproducts are fed in feedlot diets, adjustments to grain processing method and roughage level may improve cattle performance. Innovative storage methods for wet byproducts and the use of dried byproducts offer small operations flexibility when using byproducts. As new byproducts are developed by ethanol plants, they should be evaluated with performance data to determine their product-specific feeding values.

Terry J. Klopfenstein; Galen E. Erickson; Virgil R. Bremer

2007-01-01T23:59:59.000Z

222

Subsidiary condition for Yang-Mills theory  

Science Journals Connector (OSTI)

A subsidiary condition for Yang-Mills theory is given. A prescription is proposed for using such a subsidiary condition to eliminate unphysical degrees of freedom from gauge theories in covariant gauges. It is pointed out that elimination of such unphysical modes can generate explicit nonlocal interactions among particles in the physical subspace. The Coulomb interactions among charged particles in QED is one such nonlocal interaction that can be generated in this way. It is argued that confining forces among color-bearing combinations of quarks and transverse gluons in QCD might be another.

Kurt Haller

1983-12-15T23:59:59.000Z

223

Grinding media oscillation: effect on torsional vibrations in tumble mills  

E-Print Network (OSTI)

of oscillation of grinding media on torsional vibrations of the mill. A theoretical model was developed to determine the oscillating frequency of the grinding media. A 12" (0.3 m) diameter tumble mill test rig was built with a 0.5 hp DC motor. The rig is tested...

Toram, Kiran Kumar

2005-11-01T23:59:59.000Z

224

Tons of Heavy Metals in Mill Creek Sediments Heather Freeman  

E-Print Network (OSTI)

objectives for this summer research were to: 1.) determine how much heavy metal pollution has accumulatedTons of Heavy Metals in Mill Creek Sediments Heather Freeman 8/30/99 Geology Department Advisors: Dr. Kees DeJong Dr. Barry Manyard Dr. David Nash #12;Tons of heavy metals in Mill Creek sediments

Maynard, J. Barry

225

Rapid nutrient determination of sugarcane milling by-products using near infrared spectroscopy.  

E-Print Network (OSTI)

??This thesis investigates the use of near infrared (NIR) spectroscopic methods for rapid measurement of nutrient elements in mill mud and mill ash. Adoption of (more)

Keeffe, Eloise Caitlin

2013-01-01T23:59:59.000Z

226

PSR J0357+3205: the tail of the turtle  

E-Print Network (OSTI)

Using a new XMM-Newton observation, we have characterized the X-ray properties of the middle-aged radio-quiet gamma-ray pulsar J0357+3205 (named Morla) and its tail. The X-ray emission from the pulsar is consistent with a magnetospheric non-thermal origin plus a thermal emission from a hot spot (or hot spots). The lack of a thermal component from the whole surface makes Morla the coldest neutron star in its age range. We found marginal evidence for a double-peaked modulation of the X-ray emission. The study of the 9'-long tail confirmed the lack of extended emission near the pulsar itself. The tail shows a very asymmetric brightness profile and its spectrum lacks any spatial variation. We found the nebular emission to be inconsistent with a classical bow-shock, ram-pressure dominated pulsar wind nebula. We propose thermal bremsstrahlung as an alternative mechanism for Morla's tail emission. In this scenario, the tail emission comes from the shocked interstellar medium (ISM) material heated up to X-ray tempera...

Marelli, Martino; Salvetti, David; Sartore, Nicola; Sartori, Angelica; Caraveo, Patrizia; Pizzolato, Fabio; Parkinson, Pablo M Saz; Belfiore, Andrea

2013-01-01T23:59:59.000Z

227

Otter Tail Power Company - Commercial Energy Efficiency Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Otter Tail Power Company - Commercial Energy Efficiency Rebate Otter Tail Power Company - Commercial Energy Efficiency Rebate Program Otter Tail Power Company - Commercial Energy Efficiency Rebate Program < Back Eligibility Agricultural Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Heating Heat Pumps Appliances & Electronics Commercial Lighting Lighting Manufacturing Water Heating Maximum Rebate Water Heaters: $5,000 Lighting: over $4,500 must be preapproved Program Info State South Dakota Program Type Utility Rebate Program Rebate Amount Lighting (Hard-Wired Systems): $0.20/watt of demand reduction Lighting (Screw-In CFL/LED): $0.05/watt of demand reduction Motors: $20 - $3,000 Air Source Heat Pumps: $160 Geothermal Heat Pumps: $350 Water Heaters: $150 - $300; or $20/kw Thermal Storage: $20 - $40

228

Otter Tail Power Company - Dollar Smart Financing Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Loans may not exceed 80% of projects total cost Loans may not exceed 80% of projects total cost General Residential: $7,000 Geothermal for Residential: $20,000 Dual Fuel for Residential: $15,000 General Business: $25,000 Geothermal for Business: $40,000 Program Info State North Dakota Program Type Utility Loan Program Rebate Amount Minimum: $150 Provider Otter Tail Power Company Otter Tail Power Company's Dollar Smart Financing Program offers $150 - $40,000 loans to its residential and business customers. Customers who have satisfactory 12-month payment histories with Otter Tail or another utility may use the 8.5% interest rate loan to finance purchases of new electric technologies. Loans may not exceed 80 percent of the project's total cost, and the maximum residential loan is $7,000 with the exception of geothermal

229

Otter Tail Power Company - Dollar Smart Financing Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential: $20,000 Residential: $20,000 Commercial: $40,000 Program Info State South Dakota Program Type Utility Loan Program Rebate Amount Residential: $7,000 Residential Geothermal Heat Pump: $15,000 - $20,000 Commercial: $25,000 Commercial Geothermal Heat Pump: $40,000 Provider Otter Tail Power Company Otter Tail Power Company's Dollar Smart Financing Program offers loans of $150 - $40,000 to residential and business customers. Customers who have satisfactory 12-month payment histories with Otter Tail or another utility may use the 8.5% interest rate loan to finance purchases of new electric technologies. Loans may not exceed 80 percent of the project's total cost, and the maximum residential loan is $7,000 with the exception of geothermal heat pump installations and combination electric systems such as a thermal

230

The annual behavioral cycle of male white-tailed deer  

E-Print Network (OSTI)

THE ANNUAL BEHAVIORAL CYCLE OF MALE WHITE-TAILED DEER A Thesis by BENNETT ANDREW BROWN, JR. Submitted to the Graduate College of Texas AlkM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE December... 1971 Major Subject: Wildlife Science THE ANNUAL BEHAVIORAL CYCLE OF MALE WHITE-TAILED DEER A Thesis by BENNETT ANDREW BROWN, JR. Approved as to style d content by: ( hairman of Co i tee Head of Department) Member (Member ) (Member) M er Member...

Brown, Bennett A

2012-06-07T23:59:59.000Z

231

Adrenal weight in a Texas white-tailed deer herd  

E-Print Network (OSTI)

ADRENAL WEIGHT IN A TEXAS WHITE-TAILED DEER HERD A Thesis by CHARLES WARREN RAMSEY Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE December 1975 Major... Subject: Wildlife and Fisheries Sciences ADRENAL WEIGHT IN A TEXAS WHITE-TAILED DEER HERD A Thesis by CHARLES WARREN RAMSEY Approved as to style and content by: ( airman o Committ ) (Head of Department) (Member) (Member) December 1975 1. 1, 1...

Ramsey, Charles Warren

2012-06-07T23:59:59.000Z

232

Mille Lacs Energy Cooperative | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Jump to: navigation, search Name Mille Lacs Energy Cooperative Place Minnesota Utility Id 12546 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Dual Fuel Space Heating Rate Electric Combination Heating Rate Freedom Heating Rate Residential General Service Residential Green Power Energy Large Power Commercial Large Power - Industrial Industrial Light - 100 watt HPS Lighting Light - 150 watt HPS Lighting Off-Peak Energy Rate Residential Peak Shave Water Heating Rate Residential

233

Dams, Mills, and Electric Power (Missouri) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mills, and Electric Power (Missouri) Mills, and Electric Power (Missouri) Dams, Mills, and Electric Power (Missouri) < Back Eligibility Commercial Industrial Institutional Investor-Owned Utility Local Government Municipal/Public Utility Retail Supplier Rural Electric Cooperative State/Provincial Govt Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Missouri Program Type Siting and Permitting Provider Missouri Department of Natural Resources The Water Resources Center of the Missouri Department of Natural Resources is responsible for implementing regulations pertaining to dam and reservoir safety. Any person or corporation may erect a dam across any watercourse, provided that: (a) the entity is chartered to construct, operate and

234

4-Poster Tick Management and White-tailed Deer Management  

E-Print Network (OSTI)

Update on: 4-Poster Tick Management and White-tailed Deer Management Tim Green Environmental Protection Division April 12, 2012 #12;4-Poster Tick Management System Employees affected by ticks account for the highest number of visits annually to the Occupational Medical Clinic 4-Poster Tick Management System

Homes, Christopher C.

235

On Prof. Arrhenius' Theory of Cometary Tails and Auror  

Science Journals Connector (OSTI)

... certain statements made in recent accounts of Arrhenius' theory which were disproved by Prof. Schwarzschild's computations. I was fully aware at the time that Arrhenius himself had already ... vapours carried into the extreme parts of the tail, since the analysis of Prof. Schwarzschild shows that the pressure of light is far too insignificant to exert a repulsion upon ...

J. HALM

1902-05-15T23:59:59.000Z

236

On Prof. Arrhenius' Theory of Cometary Tails and Auror  

Science Journals Connector (OSTI)

... and gravitation follows an entirely different law. This has recently been demonstrated by Prof. Schwarzschild by an exhaustive mathematical treatment of the question in a paper entitled Der Druck ... so that it is then always exceeded by gravitation. It would appear from Prof. Schwarzschild's computations that the globular corpuscles thrown off in the tails of comets should have ...

J. HALM

1902-03-06T23:59:59.000Z

237

Head-Tail Modes for Strong Space Charge  

SciTech Connect

Head-tail modes are described here for the space charge tune shift significantly exceeding the synchrotron tune. General equation for the modes is derived. Spatial shapes of the modes, their frequencies, and coherent growth rates are explored. The Landau damping rates are also found. Suppression of the transverse mode coupling instability by the space charge is explained.

Burov, Alexey

2008-12-01T23:59:59.000Z

238

The fish tail motion forms an attached leading edge vortex  

Science Journals Connector (OSTI)

...research-article Research articles 1001 25 18 The fish tail motion forms an attached leading edge...of the most prominent characteristics of fishes, and the analysis of the flow pattern...this mechanism has not been reported in fish-like swimming probably owing to the overemphasis...

Iman Borazjani; Mohsen Daghooghi

2013-01-01T23:59:59.000Z

239

APPLICATION FOR APPROVAL OF CONSTRUCTION PION RIDGE TAILINGS FACILITIES  

E-Print Network (OSTI)

) and the State of Colorado. The Radiation Control Program of CDPHE is currently reviewing the tailings cell plans Corporation Prepared By: 44 Union Boulevard, Suite 600 Lakewood, Colorado 80228 U.S. Environmental Protection ........................................................................................................ 4 FIGURES Figure 1 Site Location Map Figure 2 Site Plan ATTACHMENTS Attachment 1 Operating Plan

240

Extremal shot noises, heavy tails and maxstable random fields.  

E-Print Network (OSTI)

Extremal shot noises, heavy tails and max­stable random fields. Clément Dombry # May 31, 2010 Abstract We consider the extremal shot noise defined by M(y) = sup{mh(y - x); (x, m) # #}, where function. Extremal shot noises naturally appear in extreme value theory as a model for spatial extremes

Recanati, Catherine

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Controlling a Steel Mill with BOXES Michael McGarity, Claude Sammut and David Clements  

E-Print Network (OSTI)

Controlling a Steel Mill with BOXES Michael McGarity, Claude Sammut and David Clements and Chambers (1968) to a large-scale, real-world problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made

Sammut, Claude

242

Microfiltration of gluten processing streams from corn wet milling C.I. Thompson a  

E-Print Network (OSTI)

Microfiltration of gluten processing streams from corn wet milling C.I. Thompson a , K.D. Rausch b 2005; accepted 6 February 2005 Available online 12 April 2005 Abstract In corn wet milling, dry matter composition; Corn processing; Membrane filtration; Corn gluten meal; Wet milling 1. Introduction Wet milling

243

96 CEREAL CHEMISTRY Comparison Between Alkali and Conventional Corn Wet-Milling: 100-g Procedures  

E-Print Network (OSTI)

96 CEREAL CHEMISTRY Comparison Between Alkali and Conventional Corn Wet-Milling: 100-g Procedures S ABSTRACT Cereal Chem. 76(1):96-99 A corn wet-milling process in which alkali was used was studied as an alternative to the conventional corn wet-milling procedure. In the alkali wet-milling process, corn was soaked

244

Blood Chemistry of Free-Ranging and Captive White-tailed Deer (Odocoileus virginianus) in Texas  

E-Print Network (OSTI)

Blood samples were collected from 602 white-tailed deer (WTD) (Odocoileus virginianus) between October 2008 October 2009, from 15 different counties throughout Texas. White-tailed deer were evaluated for serum biochemical parameters (total...

Smith, Melanie Love

2012-07-16T23:59:59.000Z

245

East Millinocket Mill Biomass Facility | Open Energy Information  

Open Energy Info (EERE)

Millinocket Mill Biomass Facility Millinocket Mill Biomass Facility Jump to: navigation, search Name East Millinocket Mill Biomass Facility Facility East Millinocket Mill Sector Biomass Location Penobscot County, Maine Coordinates 45.3230777°, -68.5806727° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.3230777,"lon":-68.5806727,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

246

DOE - Office of Legacy Management -- Marion Mill Site - CO 09  

Office of Legacy Management (LM)

Marion Mill Site - CO 09 Marion Mill Site - CO 09 FUSRAP Considered Sites Site: MARION MILL SITE (CO.09 ) Eliminated from further consideration under FUSRAP - deferred to the State of Colorado for appropriate action. Designated Name: Not Designated Alternate Name: None Location: Sugar Leaf Road , Boulder , Colorado CO.09-1 Evaluation Year: Circa 1983 CO.09-1 Site Operations: Milled and processed thorite and other rare earth ores in 1957 and 1958. Some of the thorium concentrate produced was shipped to Davison Chemical Company for further processing. CO.09-1 CO.09-3 Site Disposition: Eliminated - Site was licensed by AEC and the State of Colorado CO.09-2 CO.09-3 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Thorium, Natural Uranium, Other Rare Earth Ores CO.09-1

247

Milling Machine Replacement Project (4587), 5/11/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Milling Machine Replacement Projects (4587) Milling Machine Replacement Projects (4587) Program or Field Office: Y-12 Site Office Location(s) (City/County/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: Submit by E-mail The proposed action is to replace two large milling machines with two new medium sized CNC milling machines. The new machines will be connected to the digital network communication (DNC) system. Categorical Exclusion(s) Applied: 81.31 -Installation or relocation of machinery and equipment For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation)

248

Enhanced Dispersion from Tall Stacks Near Modern Wind Mills  

Science Journals Connector (OSTI)

Dispersion modeling of emissions from tall stacks is often done with regulatory models, based on the Gaussian plume concept. When the plumes of tall stacks are influenced by the turbulence of nearby wind mills, t...

J. J. Erbrink; Luc Verhees

2014-01-01T23:59:59.000Z

249

A hybrid type small 5-axis CNC milling machine  

E-Print Network (OSTI)

5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these ...

Son, Seung-Kil, 1964-

2002-01-01T23:59:59.000Z

250

THE PERRYMAN GROUP 510 N. Valley Mills Dr., Suite 300  

E-Print Network (OSTI)

THE PERRYMAN GROUP 510 N. Valley Mills Dr., Suite 300 Waco, TX 76710 ph. 254.751.9595, fax 254 by The Perryman Group Introduction The University of Texas at Arlington (UT Arlington or UTA) has long been

Huang, Haiying

251

Parametric Study of End Milling Glass Fibre Reinforced Composites  

SciTech Connect

This paper discusses the application of Taguchi 'Design of Experiment' method to investigate the effects of end milling parameters on machinability characteristics of unidirectional E-glass fibre reinforced polymer (GFRP) composites. A series of milling experiments were conducted using tungsten carbide end milling cutters at various spindle speeds, feed rates and depths of cut. Taguchi analysis was carried out and the signal to noise (S/N) ratio with analysis of variance (ANOVA) was employed to analyse the effects of those parameters on GFRP machinability. Overall, the results of the current investigations present some desirable combinations of the machining parameters that can further enhance the end milling machinability characteristics to suit the final requirements of the finished GFRP products.

Azmi, Azwan I.; Lin, Richard J. T.; Bhattacharyya, Debes [Centre for Advanced Composite Materials (CACM), Department of Mechanical Engineering, University of Auckland, Private Bag 92019, Auckland Mail Centre 1142, Auckland (New Zealand)

2011-01-17T23:59:59.000Z

252

Finite Action Yang-Mills Solutions on the Group Manifold  

E-Print Network (OSTI)

We demonstrate that the left (and right) invariant Maurer-Cartan forms for any semi-simple Lie group enable one to construct solutions of the Yang-Mills equations on the group manifold equipped with the natural Cartan-Killing metric. For the unitary unimodular groups the Yang-Mills action integral is finite for such solutions. This is explicitly exhibited for the case of $SU(3)$.

T Dereli; J Schray; Robin W Tucker

1996-05-17T23:59:59.000Z

253

Integration of reclamation and tailings management in oil sands surface mine planning  

Science Journals Connector (OSTI)

The processing of oil sands generates large volumes of slurry, known as tailings, that is impounded in tailings ponds. Oil sands operators are committed to develop reclamation plans to ensure that the mine site is restored to a natural or economically ... Keywords: Integer programming, Mine planning, Oil sands, Open-pit mining, Reclamation planning, Strategic planning, Tailings management

Mohammad Mahdi Badiozamani; Hooman Askari-Nasab

2014-01-01T23:59:59.000Z

254

A Process for the Aqueous Enzymatic Extraction of Corn Oil from Dry Milled Corn Germ and Enzymatic Wet Milled Corn Germ (E-Germ)  

Science Journals Connector (OSTI)

A bench-scale aqueous enzymatic method was developed to extract corn oil from corn germ from either a commercial corn dry mill or corn germ from a newly-developed experimental enzymatic wet milling process (E-Ger...

Robert A. Moreau; Leland C. Dickey

2009-05-01T23:59:59.000Z

255

Replacing chemicals in recycle mills with mechanical alternatives  

SciTech Connect

A high-intensity spark fired underwater decomposes a small amount of the water into hydroxyl radicals, which are strong oxidants. These are able to oxidize contaminants such as glue and wood pitch that enter paper recycling mills as a part of the incoming furnish and cost the industry several hundred million dollars. The sparking technique is safe, inexpensive, and is capable of treating large volumes of water, which makes it attractive for mill applications. Several mill trials were run. Sparking caused a decrease in the tack of the deposits in one case. Lower bleach use occurred in two other mills; sparking reduced the degree of ink reattachment to fiber. The payback for either application is attractive. Sparking induced deposition of contaminants in another mill, which is a positive development--if it can be controlled. The technique is also able to degas water and to oxidize odor-causing sulfur compounds. Although one unit has been purchased by a mill, second-order effects caused by the technology needs to be defined further before the technology can be broadly applied.

Institute of Paper Science Technology

2002-07-01T23:59:59.000Z

256

Experimental determination of the distribution of tail states of hydrogenated amorphous silicon: A transient photocurrent analysis  

SciTech Connect

Recent experimental developments have cast doubt on the validity of the common assumption that the distribution of tail states of hydrogenated amorphous silicon exhibits a single exponential functional form. The authors employ transient photocurrent decay measurements to determine this distribution of tail states. In their approach, however, they determine the distribution of tail states directly from the experimental data, without assuming, a priori, a specific functional form. It is found that these experimental results are consistent with other more recent experimental determinations of the distribution of tail states, suggesting the possibility of deviations from a single exponential distribution of tail states in hydrogenated amorphous silicon.

Webb, D.P.; Chan, F.Y.M.; Zou, X.C.; Chan, Y.C.; Lam, Y.W.; Lin, S.H.; O'Leary, S.K.; Lim, P.K.

1997-07-01T23:59:59.000Z

257

Otter Tail Power Company - Residential Energy Efficiency Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Residential Energy Efficiency Rebate Program Otter Tail Power Company - Residential Energy Efficiency Rebate Program < Back Eligibility Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate Refrigeration/Cooking/Lighting: rebate will not exceed 75% of project cost Program Info State Minnesota Program Type Utility Rebate Program Rebate Amount Water Heaters: $150 - $300 Thermal Storage Units: $20 - $40/KW Insulation: up to $300 Refrigerator Recycling: $50 Air-Source Heat Pumps: $240/ton Geothermal Heat Pumps: $600/ton Lighting: In-store discount Provider Customer Service Otter Tail Power Company Rebate Program offers rebates to qualifying

258

Recombination via tail states in polythiophene:fullerene solar cells  

Science Journals Connector (OSTI)

State-of-the-art models used for drift-diffusion simulations of organic bulk heterojunction solar cells based on band transport are not capable of reproducing the voltage dependence of dark current density and carrier concentration of such devices, as determined by current-voltage and charge-extraction measurements. Here, we show how to correctly reproduce this experimental data by including an exponential tail of localized states into the density of states for both electrons and holes, and allowing recombination to occur between free charge carriers and charge carriers trapped in these states. When this recombination via tail states is included, the dependence of charge-carrier concentration on voltage is distinctly different from the case of band-to-band recombination and the dependence of recombination current on carrier concentration to a power higher than 2 can be explained.

Thomas Kirchartz; Bart E. Pieters; James Kirkpatrick; Uwe Rau; Jenny Nelson

2011-03-29T23:59:59.000Z

259

Biological treatment options for consolidated tailings release waters  

SciTech Connect

Suncor Inc., Oil Sands Group, operates a large oil sands mining and extraction operation in northeastern Alberta. The extraction plant produces large volumes of a tailings slurry which resists dewatering and treatment, and is toxic to aquatic organisms. Consolidated tailings (CT) technology is used to treat tailings by either acid/lime or gypsum and enhances the possibility of treating residual fine tails in a ``dry`` land reclamation scenario and treating the release water in a wastewater treatment reclamation scenario. The objective was to assess the treatability of CT release water (i.e., the reduction of acute and chronic toxicities to trout, Ceriodaphnia, and bacteria) in bench-scale biological treatment systems. Microtox{reg_sign} IC20 test showed complete detoxification for the gypsum CT release water within 3 to 5 weeks compared with little reduction in toxicity for dyke drainage. Acute toxicity (fish) and chronic toxicity (Ceriodaphnia, bacterial) was removed from both CT release waters. Phosphate and aeration enhanced detoxification rates. Concentrations of naphthenic acids (an organic toxicant) were not reduced, but levels of dissolved organic compounds decreased faster than was the case for dyke drainage water, indicating that some of the organic compounds in both acid/lime and gypsum CT waters were more biodegradable. There was a pattern of increasing toxicity for dyke drainage water which confirmed observations during field-scale testing in the constructed wetlands and which was not observed for CT release waters. Acid/lime and gypsum CT water can be treated biologically in either an aeration pond, constructed wetlands, or a combination of both thereby avoiding the expense of long-term storage and/or conventional waste treatment systems.

Gunter, C.P.; Nix, P.G.; Sander, B. [EVS Environment Consultants, North Vancouver, British Columbia (Canada); Knezevic, Z.

1995-12-31T23:59:59.000Z

260

Levinsons theorem for potentials with Coulomb tails  

Science Journals Connector (OSTI)

In terms of the Sturm-Liouville theorem, Levinsons theorem is extended to cases of potentials with a Coulomb tail, for both the Schrdinger and Dirac equations. A concept of increasing to an infinitely large number of bound states is discussed and defined. The solutions of both equations with a Coulomb potential and their asymptotic behavior at small momentum k are calculated in detail.

Zhong-Qi Ma

1986-03-15T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Device for Writing the Time Tail from Spallation Neutron Pulses  

SciTech Connect

Recent work at Los Alamos Neutron Science Center (LANSCE), has shown that there are large gains in neutron beam intensity to be made by using coupled moderators at spallation neutron sources. Most of these gains result from broadening the pulse-width in time. However the accompanying longer exponential tail at large emission times can be a problem in that it introduces relatively large beam-related backgrounds at high resolutions. We have designed a device that can reshape the moderated neutron beam by cutting the time-tail so that a sharp time resolution can be re-established without a significant loss in intensity. In this work the basic principles behind the tail-cutter and some initial results of Monte Carlo simulations are described. Unwanted neutrons in the long time-tail are diffracted out of the transmitted neutron beam by a nested stack of aperiodic multi-layers, rocking at the same frequency as the source. Nested aperiodic multi-layers have recently been used at X-ray sources and as band-pass filters in quasi-Laue neutron experiments at reactor neutron sources. Optical devices that rock in synchronization with a pulsed neutron beam are relatively new but are already under construction at LANSCE. The tail-cutter described here is a novel concept that uses existing multi-layer technology in a new way for spallation neutrons. Coupled moderators in combination with beam shaping devices offer the means of increasing flux whilst maintaining a sharp time distribution. A prototype device is being constructed for the protein crystallography station at LANSCE. The protein crystallography station incorporates a water moderator that has been judiciously coupled in order to increase the flux over neutron energies that are important to structural biology (3-80meV). This development in moderator design is particularly important because protein crystallography is flux limited and because conventional ambient water and cold hydrogen moderators do not provide relatively large neutron fluxes over this neutron energy range.

Langan, P. (Paul); Schoenborn, Benno P.; Langan, P. (Paul); Schoenborn, Benno P.; Daemen, L. L. (Luc L.)

2001-01-01T23:59:59.000Z

262

West Coast Paper Mills Ltd WCPML | Open Energy Information  

Open Energy Info (EERE)

Mills Ltd WCPML Mills Ltd WCPML Jump to: navigation, search Name West Coast Paper Mills Ltd. (WCPML) Place Dandeli, Karnataka, India Zip 581 325 Sector Biomass Product Dandeli based biomass project developers. Coordinates 15.25272°, 74.626404° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":15.25272,"lon":74.626404,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

263

City of Lake Mills, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Mills Mills Place Iowa Utility Id 10606 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes ISO MISO Yes Operates Generating Plant Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Commercial Commercial All Electric Commercial Industrial Electric Rate Industrial Residential Residential Average Rates Residential: $0.0988/kWh Commercial: $0.0948/kWh Industrial: $0.0786/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=City_of_Lake_Mills,_Iowa_(Utility_Company)&oldid=409818

264

DOE - Office of Legacy Management -- Loma Mill - CO 03  

Office of Legacy Management (LM)

Loma Mill - CO 03 Loma Mill - CO 03 FUSRAP Considered Sites Site: Loma Mill (CO.03 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: This site is one of a group of 77 FUSRAP considered sites for which few, if any records are available in their respective site files to provide an historical account of past operations and their relationship, if any, with MED/AEC operations. Reviews of contact lists, accountable station lists, health and safety records and other documentation of the period do not provide sufficient information to warrant further search of historical records for information on these sites. These site files remain "open" to

265

Mill Run Wind Power Project | Open Energy Information  

Open Energy Info (EERE)

Wind Power Project Wind Power Project Jump to: navigation, search Name Mill Run Wind Power Project Facility Mill Run Wind Power Project Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner NextEra Energy Resources Developer Atlantic Renewable Energy Energy Purchaser Exelon Location Mill Run PA Coordinates 39.921026°, -79.388666° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.921026,"lon":-79.388666,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

266

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste December 6, 2011 - 3:57pm Addthis Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of Washington DNR. Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of

267

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste December 6, 2011 - 3:57pm Addthis Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of Washington DNR. Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of

268

Mechanical alloying of Si and Ge in a planetary ball mill: Milling parameters and microscopic evolution of alloy formation  

SciTech Connect

The external parameters geometry and frequency of a planetary ball mill were adjusted in order to minimize the duration of mechanically induced Si-Ge alloy formation. Experimental results were compared with theoretical calculations on impact energies and milling power. It was found that a planetary ball mill with a ratio of the planetary to the system wheel`s frequency of {minus}3 delivers the best milling performance for vial sizes between 0.2 and 0.33 that of the system wheel size. Microstructural investigations on powder compacts revealed that a solid state diffusion mechanism of Ge into the harder Si seems to be the responsible process for realizing a homogeneous Si-Ge alloy. Crystallite sizes of the processed powders were 30 nm. The knowledge of the influence of external milling parameters on the comminution and alloying behavior of substances and the resulting internal structure of the processed ingots may help in a future correlation between thermoelectrical properties and microstructure. {copyright} {ital 1995} {ital American} {ital Institute} {ital of} {ital Physics}.

Schilz, J.; Pixius, K.; Amend, W. [Institute of Materials Research, German Aerospace Research Establishment (DLR), Linder Hoehe, 51147 Koehn (Germany); Plate, M.; Meyer, H. [Retsch Co., Rheinische Str. 36, 42781 Haan (Germany)

1994-08-10T23:59:59.000Z

269

Mills, Dams, and Reservoirs (Massachusetts) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » Mills, Dams, and Reservoirs (Massachusetts) Mills, Dams, and Reservoirs (Massachusetts) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Massachusetts Program Type Siting and Permitting Provider Department of Conservation and Recreation This chapter of the Massachusetts General Laws outlines procedures to

270

Rockwell Automation & General Mills Teaming Profile | ENERGY STAR Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation & General Mills Teaming Profile Rockwell Automation & General Mills Teaming Profile Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

271

Fermentation and chemical treatment of pulp and paper mill sludge  

DOE Patents (OSTI)

A method of chemically treating partially de-ashed pulp and/or paper mill sludge to obtain products of value comprising taking a sample of primary sludge from a Kraft paper mill process, partially de-ashing the primary sludge by physical means, and further treating the primary sludge to obtain the products of value, including further treating the resulting sludge and using the resulting sludge as a substrate to produce cellulase in an efficient manner using the resulting sludge as the only carbon source and mixtures of inorganic salts as the primary nitrogen source, and including further treating the resulting sludge and using the resulting sludge to produce ethanol.

Lee, Yoon Y; Wang, Wei; Kang, Li

2014-12-02T23:59:59.000Z

272

Detection of instabilities and transition in milling operation using wavelets  

E-Print Network (OSTI)

conditions was developed by Burney et al. (1977). During the 1980's the pnmary focus of the research in this area was on the dynamics of the cutting process and its modeling as indicated by Wu and Liu (1985a, 1985b) and Lauderbaugh and Ulsoy (1988). Tlusty... for the milling process that can be used to determine the cutting forces and surface finish under both rigid and dynamic cutting. Smith and Tlusty (1991) gave a good overview of the different models for the milling process. The 90's saw the advent of new...

Khurjekar, Parag Padmakar

2000-01-01T23:59:59.000Z

273

Dust size distribution and concentrations with cottonseed oil mills  

E-Print Network (OSTI)

-VOLUME SAMPLES FOR P. S. D OF PARTICLES & 100 um DIAMETER (MMD) ANALYSIS OF VARIANCE ON HIGH-VOLUME SAMPLES FOR P. S. D. OF PARTICLES & 100 um DIAMETER (og) MULTIPLE RANGE TEST FOR MEAN VALUES OF MMD BY AREA MULTIPLE RANGE TEST OF MMD BY MILL PARTICLE SIZE... TEST OF AREA DUST CONCENTRATIONS = 15 Pm IN DIAMETER MULTIPLE RANGE TEST OF MILL DUST CONCENTRATIONS & 15 um IN DIAMETER ANALYSIS OF VARIANCE ON PARTICLE SIZING HEAD SAMPLES OF CONCENTRATIONS FOR PARTICLES & 100 IJBI DIAMETER . . . . 47 47 54...

Wiederhold, Lee Roy

2012-06-07T23:59:59.000Z

274

Condition Monitoring in End-Milling Using Wireless Sensor Networks (WSNs)  

E-Print Network (OSTI)

Estimation of tool wear during CNC milling using neuralsensors to a standard CNC machine tool. In related work, thehead of a Haas VF-0 20HP CNC 3-axis milling machine. The

Wright, Paul; Dornfeld, David; Ota, Nathan

2008-01-01T23:59:59.000Z

275

Analysis and Strategies for Five-Axis Near-Dry EDM Milling.  

E-Print Network (OSTI)

??Strategies for precision five-axis near-dry electric discharge machining (EDM) milling are investigated. By understanding the material removal process behind near-dry EDM milling, its performance can (more)

Fujiki, Masahiro

2009-01-01T23:59:59.000Z

276

Solution of symmetry equation and hierarchy of self dual Yang-Mills systems  

E-Print Network (OSTI)

The solution of symmetry equation of Yang-Mills self dual system is found in explicit form of its raising Hamiltonian operator. Thus explicit form of equations of self dual Yang Mills hierarchy is constructed.

A. N. Leznov

2008-02-11T23:59:59.000Z

277

Advanced Powerhouse Controls Save Pulp Mill $500 in Purchased Energy in First Month  

E-Print Network (OSTI)

This case study describes the application of advanced regulatory and supervisory controls to powerhouse operations at a large pulp mill in central British Columbia. Substantial reductions in mill operating costs were achieved by actively managing...

Morrison, R.; Hilder, S.

2004-01-01T23:59:59.000Z

278

EXTENDED TAILS FROM SGR 1806-20 BURSTS  

SciTech Connect

In 2004, SGR 1806-20 underwent a period of intense and long-lasting burst activity that included the giant flare of 2004 December 27-the most intense extra-solar transient event ever detected at Earth. During this active episode, we routinely monitored the source with Rossi X-ray Timing Explorer and occasionally with Chandra. During the course of these observations, we identified two relatively bright bursts observed with Konus-Wind in hard X-rays that were followed by extended X-ray tails or afterglows lasting hundreds to thousands of seconds. Here, we present detailed spectral and temporal analysis of these events observed about 6 and 1.5 months prior to the 2004 December 27 giant flare. We find that both X-ray tails are consistent with a cooling blackbody of constant radius. These spectral results are qualitatively similar to those of the burst afterglows recorded from SGR 1900+14 and recently from SGR 1550-5418. However, the latter two sources exhibit significant increase in their pulsed X-ray intensity following the burst, while we did not detect any significant changes in the rms pulsed amplitude during the SGR 1806-20 events. Moreover, we find that the fraction of energy partitioned to the burst (prompt energy release) and the tail (afterglow) differs by an order of magnitude between SGR 1900+14 and SGR 1806-20. We suggest that such differences can be attributed to differences in the crustal heating mechanism of these neutron stars combined with the geometry of the emitting areas.

Goegues, Ersin; Kaneko, Yuki [Faculty of Engineering and Natural Sciences, Sabanci University, Orhanli-Tuzla, Istanbul 34956 (Turkey); Woods, Peter M. [Corvid Technologies, 689 Discovery Drive, Huntsville, AL 35806 (United States); Kouveliotou, Chryssa [Space Science Office, VP-62, NASA/Marshall Space Flight Center, Huntsville, AL 35812 (United States); Finger, Mark H. [Universities Space Research Association, 6767 Old Madison Pike, Huntsville, AL 35805 (United States); Pal'shin, Valentin; Golenetskii, Sergey; Frederiks, Dmitry [Ioffe Physical-Technical Institute of the Russian Academy of Sciences, 26 Polytekhnicheskaya, St Petersburg 194021 (Russian Federation); Airhart, Carol, E-mail: ersing@sabanciuniv.edu [Dynetics Inc., 1000 Explorer Boulevard, Huntsville, AL 35806 (United States)

2011-10-20T23:59:59.000Z

279

Motional Broadening in Ensembles With Heavy-Tail Frequency Distribution  

E-Print Network (OSTI)

We show that the spectrum of an ensemble of two-level systems can be broadened through `resetting' discrete fluctuations, in contrast to the well-known motional-narrowing effect. We establish that the condition for the onset of motional broadening is that the ensemble frequency distribution has heavy tails with a diverging first moment. We find that the asymptotic motional-broadened lineshape is a Lorentzian, and derive an expression for its width. We explain why motional broadening persists up to some fluctuation rate, even when there is a physical upper cutoff to the frequency distribution.

Yoav Sagi; Rami Pugatch; Ido Almog; Nir Davidson; Michael Aizenman

2011-03-02T23:59:59.000Z

280

Motional broadening in ensembles with heavy-tail frequency distribution  

SciTech Connect

We show that the spectrum of an ensemble of two-level systems can be broadened through ''resetting'' discrete fluctuations, in contrast to the well-known motional-narrowing effect. The broadening occurs if the ensemble frequency distribution has heavy tails with a diverging first moment. The asymptotic motional broadened line shape is then a Lorentzian. In case there is a physical upper cutoff in the frequency distribution, the broadening effect may still be observed, though only up to a certain fluctuation rate.

Sagi, Yoav; Pugatch, Rami; Almog, Ido; Davidson, Nir; Aizenman, Michael [Department of Physics of Complex Systems, Weizmann Institute of Science, Rehovot 76100 (Israel); Departments of Physics and Mathematics, Princeton University, Princeton, NJ 08544 (United States)

2011-04-15T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Characterization and heritability studies on factors which affect milling properties of sorghum (Sorghum bicolor [L.] Moench)  

E-Print Network (OSTI)

Udy mi 1 1 was that milled for 120 seconds) was reduced into flour with the Udy cyclone sample mill (UD Corporation, Boulder Colorado USA ) for reflectance test . The reflectance reading was conducted on a Gardner co lorimeter . The standard values... Udy mi 1 1 was that milled for 120 seconds) was reduced into flour with the Udy cyclone sample mill (UD Corporation, Boulder Colorado USA ) for reflectance test . The reflectance reading was conducted on a Gardner co lorimeter . The standard values...

Saadan, Hamis Mohamed

2012-06-07T23:59:59.000Z

282

128 CEREAL CHEMISTRY Effects of Alkali Debranning, Roller Mill Cracking and Gap Setting, and Alkali  

E-Print Network (OSTI)

was obtained when steeping corn in 0.5% NaOH for 1 hr at 45�C. Alkali corn wet-milling has been studied Steeping Conditions on Milling Yields from a Dent Corn Hybrid P. Yang,1 L. Du,1,2 D. L. Wang,1 B. H. Li,1 K was significantly affected by all three main unit oper- ations in alkali wet-milling (debranning, roller milling

283

Life in Challenge Mills, Yuba County, California, 18751915 Andrew Martin Leach  

E-Print Network (OSTI)

Mills, Yuba County, California, 1875­1915 steam engine and boiler, production increased to 40,000 board

Standiford, Richard B.

284

A strategy for selection of the optimal machining sequence in high speed milling process  

Science Journals Connector (OSTI)

In order to reduce total manufacturing time for dies and moulds, machining process should be optimised. In this method, the parts, characterised by complex geometry, are produced by significant application of high speed milling utilisation of ball end ... Keywords: ball end milling, high speed machining, high speed milling, machining sequences, machining strategy, process optimisation, process planning, rest machining, sculptured surfaces, sequence selection

Rezo Aliyev

2006-09-01T23:59:59.000Z

285

Survival in lake water of Klebsiella pneumoniae discharged by a paper mill.  

Science Journals Connector (OSTI)

...Klebsiella pneumoniae discharged by a paper mill. S I Niemela P Vaatanen We investigated...receiving bacteria mainly from a paper mill. An mFC-inositol-carbenicillin-agar...Klebsiella pneumoniae discharged by a paper mill. | We investigated survival of Klebsiella...

S I Niemel; P Vtnen

1982-08-01T23:59:59.000Z

286

Solving Steel Mill Slab Problems with Constraint-Based Techniques: CP, LNS, and  

E-Print Network (OSTI)

Solving Steel Mill Slab Problems with Constraint-Based Techniques: CP, LNS, and CBLS Pierre Schaus, 2010 Abstract The Steel Mill Slab Problem is an optimization benchmark that has been studied for a long approaches. In a second part of the paper, we present a variation of the Steel Mill Slab Problem whose aim

Deville, Yves

287

Determination of Fumonisins in Milled Corn Grains Using HPLC-MS  

Science Journals Connector (OSTI)

......No. 1126/2007 (for milling fractions of maize with...m1,400 g/kg and for milling fractions of maize with...of Fumonisins in Milled Corn Grains Using HPLCMS Vlastimil...because the aerosol was wet and caused discharges...samples of grounded maize corn. The mycotoxin content......

Vlastimil Dohnal; Alena Jezkov; Ivana Polisensk; Kamil Kuca

2010-09-01T23:59:59.000Z

288

Vol. 82, No. 4, 2005 431 Phosphorus Concentrations and Flow in Maize Wet-Milling Streams  

E-Print Network (OSTI)

gluten meal (CGM) and corn gluten feed (CGF) is important to the maize wet-milling industry. HighVol. 82, No. 4, 2005 431 Phosphorus Concentrations and Flow in Maize Wet-Milling Streams Kent D in animal wastes. The objective was to measure the concentration and flow of phosphorus in the wet-milling

289

Characterization of light gluten and light steep water from a corn wet milling plant  

E-Print Network (OSTI)

Characterization of light gluten and light steep water from a corn wet milling plant K.D. Rausch March 2003; accepted 10 March 2003 Abstract The primary commodity of corn wet milling is starch, but two Ltd. All rights reserved. Keywords: Coproducts; Corn gluten meal; Corn gluten feed; Corn wet milling

290

ENGINEERING AND PROCESSING A 100-g Laboratory Corn Wet-Milling Procedure  

E-Print Network (OSTI)

ENGINEERING AND PROCESSING A 100-g Laboratory Corn Wet-Milling Procedure S. R. ECKHOFF,' S. K in replicates of 0.36% when the replicates were per- The feasibility of corn wet-milling facilities processing of biotechnology and genetic engineering in corn hybrid development. Identification of better wet-milling hybrids

291

Low Temperature Milling of the LiNH2 + LiH Hydrogen Storage System...  

NLE Websites -- All DOE Office Websites (Extended Search)

Milling of the LiNH2 + LiH Hydrogen Storage System. Low Temperature Milling of the LiNH2 + LiH Hydrogen Storage System. Abstract: Ball milling of the LiNH2 + LiH storage system was...

292

Radio-Ecological Conditions of Groundwater in the Area of Uranium Mining and Milling Facility - 13525  

SciTech Connect

Manmade chemical and radioactive contamination of groundwater is one of damaging effects of the uranium mining and milling facilities. Groundwater contamination is of special importance for the area of Priargun Production Mining and Chemical Association, JSC 'PPMCA', because groundwater is the only source of drinking water. The paper describes natural conditions of the site, provides information on changes of near-surface area since the beginning of the company, illustrates the main trends of contaminators migration and assesses manmade impact on the quality and mode of near-surface and ground waters. The paper also provides the results of chemical and radioactive measurements in groundwater at various distances from the sources of manmade contamination to the drinking water supply areas. We show that development of deposits, mine water discharge, leakages from tailing dams and cinder storage facility changed general hydro-chemical balance of the area, contributed to new (overlaid) aureoles and flows of scattering paragenetic uranium elements, which are much smaller in comparison with natural ones. However, increasing flow of groundwater stream at the mouth of Sukhoi Urulyungui due to technological water infiltration, mixing of natural water with filtration streams from industrial reservoirs and sites, containing elevated (relative to natural background) levels of sulfate-, hydro-carbonate and carbonate- ions, led to the development and moving of the uranium contamination aureole from the undeveloped field 'Polevoye' to the water inlet area. The aureole front crossed the southern border of water inlet of drinking purpose. The qualitative composition of groundwater, especially in the southern part of water inlet, steadily changes for the worse. The current Russian intervention levels of gross alpha activity and of some natural radionuclides including {sup 222}Rn are in excess in drinking water; regulations for fluorine and manganese concentrations are also in excess. Possible ways to improve the situation are considered. (authors)

Titov, A.V.; Semenova, M.P.; Seregin, V.A.; Isaev, D.V.; Metlyaev, E.G. [FSBU SRC A.I.Burnasyan Federal Medical Biophysical Center of FMBA of Russia, Zhivopisnaya Street, 46, Moscow (Russian Federation)] [FSBU SRC A.I.Burnasyan Federal Medical Biophysical Center of FMBA of Russia, Zhivopisnaya Street, 46, Moscow (Russian Federation); Glagolev, A.V.; Klimova, T.I.; Sevtinova, E.B. [FSESP 'Hydrospecgeologiya' (Russian Federation)] [FSESP 'Hydrospecgeologiya' (Russian Federation); Zolotukhina, S.B.; Zhuravleva, L.A. [FSHE 'Centre of Hygiene and Epidemiology no. 107' under FMBA of Russia (Russian Federation)] [FSHE 'Centre of Hygiene and Epidemiology no. 107' under FMBA of Russia (Russian Federation)

2013-07-01T23:59:59.000Z

293

Development Of Reclamation Substrates For Alberta Oil Sands Using Mature Fine Tailings And Coke.  

E-Print Network (OSTI)

??Mature fine tailings and coke are waste products of the oil sands industry with potential for reclamation. A greenhouse study assessed whether substrates of various (more)

Luna-Wolter, Gabriela L.

2012-01-01T23:59:59.000Z

294

Revisiting Directed Polymers with heavy-tailed disorder  

E-Print Network (OSTI)

In this mostly numerical study, we revisit the statistical properties of the ground state of a directed polymer in a $d=1+1$ "hilly" disorder landscape, i.e. when the quenched disorder has power-law tails. When disorder is Gaussian, the polymer minimizes its total energy through a collective optimization, where the energy of each visited site only weakly contributes to the total. Conversely, a hilly landscape forces the polymer to distort and explore a larger portion of space to reach some particularly deep energy sites. As soon as the fifth moment of the disorder diverges, this mechanism radically changes the standard "KPZ" scaling behaviour of the directed polymer, and new exponents prevail. After confirming again that the Flory argument accurately predicts these exponent in the tail-dominated phase, we investigate several other statistical features of the ground state that shed light on this unusual transition and on the accuracy of the Flory argument. We underline the theoretical challenge posed by this situation, which paradoxically becomes even more acute above the upper critical dimension.

Thomas Gueudr; Pierre Le Doussal; Jean-Philippe Bouchaud; Alberto Rosso

2014-11-05T23:59:59.000Z

295

Veeco Solar Equipment formerly Mill Lane Engineering | Open Energy  

Open Energy Info (EERE)

Veeco Solar Equipment formerly Mill Lane Engineering Veeco Solar Equipment formerly Mill Lane Engineering Jump to: navigation, search Name Veeco Solar Equipment (formerly Mill Lane Engineering) Place Lowell, Massachusetts Zip 1851 Sector Solar Product Mill Lane Engineering is a privately held Massachusetts corporation that designs, builds, and integrates custom solar equipment and flexible solar panel coating systems. Coordinates 43.33937°, -88.817939° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.33937,"lon":-88.817939,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

296

INTRODUCTION TO MACHINING 1.2 MILLING MACHINE  

E-Print Network (OSTI)

and rotates inside the quill (which can be moved vertically). Spindle speed selector: typically a wheel which in either the x or y direction into the workpiece (peripheral cutting). -Ball nose end mill: Ball nose end advanced, sculpted surfaces. Figure 1.2.3: Endmills Figure1. 2.4: Ball Nose Endmill 19 #12;INTRODUCTION

Sun, Yu

297

The inheritance of fruit colour in apple (Malus pumila Mill.)  

E-Print Network (OSTI)

The inheritance of fruit colour in apple (Malus pumila Mill.) Allan G. WHITE Yves LESPINASSE that red fruit colour was determined by two dominant complementary genes. Blush and red colour did key words : Skin colour, hybridization. R?SUM? Hérédité de la couleur du fruit chez le pommier (Malus

Paris-Sud XI, Université de

298

Microfiltration of gluten processing streams from corn wet milling  

Science Journals Connector (OSTI)

In corn wet milling, dry matter can be separated from liquids in process streams with centrifuges or vacuum belt filtration (VBF). Because separations usually are not complete, dry matter can be lost in the liquid streams (overflow from the gluten thickener centrifuge and filtrate from VBF). This represents a loss of nutrients, especially protein, to low valued coproducts and reduces quality of water for recycling within the process. The objective was to compare microfiltration of light and heavy gluten process streams to conventional separation methods. Batches of light and heavy gluten were obtained from a wet mill plant and processed by microfiltration. Samples of permeate and concentrate from microfiltration were analyzed and compared to corresponding streams from wet milling. Microfiltration of light gluten resulted in concentrate and permeate streams similar in composition to conventionally processed light gluten using a centrifuge, suggesting that microfiltration is as effective as centrifugation in partitioning solids and water in light gluten. Dewatering of heavy gluten found that conventional VBF caused dry matter concentrations in gluten cake to be higher than concentrate from microfiltration. Permeate from microfiltration of heavy gluten had higher concentrations of ash and lower soluble nitrogen than filtrate from VBF. Microfiltration was able to remove more ash from concentrate, which may improve the value of wet milling coproducts. These data demonstrated microfiltration has potential for separation of light and heavy gluten streams, but more data are needed on effectiveness and practicality.

C.I. Thompson; K.D. Rausch; R.L. Belyea; M.E. Tumbleson

2006-01-01T23:59:59.000Z

299

Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings  

SciTech Connect

This case study describes how the Boise Inc. paper mill in St. Helens, Oregon, achieved annual savings of approximately 154,000 MMBtu and more than $1 million after receiving a DOE Save Energy Now energy assessment and implementing recommendations to improve the efficiency of its steam system.

Not Available

2008-05-01T23:59:59.000Z

300

Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings  

Energy.gov (U.S. Department of Energy (DOE))

This case study describes how the Boise Inc. paper mill in St. Helens, Oregon, achieved annual savings of approximately 154,000 MMBtu and more than $1 million. This was accomplished after receiving a DOE energy assessment and implementing recommendations to improve the efficiency of its steam system.

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Milling Machine Policies This milling machine must be used by only qualified users. A qualified user list is posted  

E-Print Network (OSTI)

, replace it with one from stock and throw the old one in the sharps disposal unit. Do not put of the damaged bit and sand down any burs introduced to the milling plate to keep the face as flat as possible contour routing, keep looking to see if the contour bit goes down. If so, shut off the machine immediately

Chappell, William J.

302

Vertical Tail Buffeting Alleviation Using Piezoelectric Actuators---Some Results of the Actively Controlled Response of Buffet-Affected Tails (ACROBAT) Program  

Science Journals Connector (OSTI)

Buffet is an aeroelastic phenomenon associated with high performance aircraft especially those with twin vertical tails. In particular, for the F/A-18 aircraft at high angles of attack, vortices emanating from wing/fuselage leading edge extensions burst, ...

Moses Robert W.

1997-04-01T23:59:59.000Z

303

Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd | Open Energy  

Open Energy Info (EERE)

Jingye Bearing Manufacture for Rolling Mills Co Ltd Jingye Bearing Manufacture for Rolling Mills Co Ltd Jump to: navigation, search Name Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd Place Beijing Municipality, China Sector Wind energy Product Beijing-based wind turbine bearing maker. References Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd is a company located in Beijing Municipality, China . References ↑ "Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd" Retrieved from "http://en.openei.org/w/index.php?title=Beijing_Jingye_Bearing_Manufacture_for_Rolling_Mills_Co_Ltd&oldid=342621

304

Otter Tail Power Co (South Dakota) | Open Energy Information  

Open Energy Info (EERE)

South Dakota South Dakota Utility Id 14232 References Energy Information Administration.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png GS (General Service Secondary) Commercial GS-TOU (General Service Time-Of-Use) RDC Residential RS Commercial SGS (Small General Service Secondary Service) Commercial test Residential Average Rates Residential: $0.0813/kWh Commercial: $0.0656/kWh Industrial: $0.0569/kWh The following table contains monthly sales and revenue data for Otter Tail Power Co (South Dakota). Month RES REV (THOUSAND $) RES SALES (MWH) RES CONS COM REV (THOUSAND $) COM SALES (MWH) COM CONS IND_REV (THOUSAND $) IND SALES (MWH) IND CONS OTH REV (THOUSAND $) OTH SALES (MWH) OTH CONS TOT REV (THOUSAND $) TOT SALES (MWH) TOT CONS

305

Otter Tail Power Company - Commercial and Industrial Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial and Industrial Energy Commercial and Industrial Energy Efficiency Rebate Program Otter Tail Power Company - Commercial and Industrial Energy Efficiency Rebate Program < Back Eligibility Agricultural Commercial Industrial Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Heating Heat Pumps Appliances & Electronics Commercial Lighting Lighting Manufacturing Water Heating Maximum Rebate Refrigeration/Cooking/Lighting: rebate will not exceed 75% of project cost Retrocommissioning: $20,000 Retrocommissioning: Building must have at least 40,000 sq ft of conditioned space Program Info State Minnesota Program Type Utility Rebate Program Rebate Amount Water Heating: $150 - $300 or $20/kW Thermal Storage: $20 - $40/kW Condensers: $25/HP - $100/HP

306

Otter Tail Power Company - Energy Efficiency Rebate Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Rebate Program Energy Efficiency Rebate Program Otter Tail Power Company - Energy Efficiency Rebate Program < Back Eligibility Commercial Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Appliances & Electronics Water Heating Maximum Rebate Commercial Water Heaters: $5,000 Program Info State North Dakota Program Type Utility Rebate Program Rebate Amount Residential Demand Control: $300/unit Water Heaters: $150 - $300 Commercial Water Heaters: $20/kW RDC Thermal Storage Units: $20/kW, up to 100 kW Deferred-load Thermal Storage Units: $20/kw, up to 200 kW, plus $10/kW for up to 1,000 additional kW Fixed-time-of-delivery Thermal Storage Units: $40/kw, up to 200 kW, plus $20/kW for up to 1,000 additional kW AC Controls: $7/month seasonally

307

Sloshing in the LNG shipping industry: risk modelling through multivariate heavy-tail analysis  

E-Print Network (OSTI)

Sloshing in the LNG shipping industry: risk modelling through multivariate heavy-tail analysis In the liquefied natural gas (LNG) shipping industry, the phenomenon of slosh- ing can lead to the occurrence in the LNG shipping industry. KEYWORDS: Sloshing, multivariate heavy-tail distribution, asymptotic depen

308

MEASUREMENT OF OXYGEN CONSUMPTION AND DIFFUSION IN EXPOSED AND COVERED REACTIVE MINE TAILINGS1  

E-Print Network (OSTI)

MEASUREMENT OF OXYGEN CONSUMPTION AND DIFFUSION IN EXPOSED AND COVERED REACTIVE MINE TAILINGS1 the in situ oxygen diffusion and consumption in tailings. It provides measured values for the oxygen reaction rate Kr and the effective diffusion De coefficients based on oxygen consumption and diffusion tests

Aubertin, Michel

309

Processing Quantities with Heavy-Tailed Distribution of Measurement Uncertainty: How  

E-Print Network (OSTI)

Processing Quantities with Heavy-Tailed Distribution of Measurement Uncertainty: How to Estimate, the distribution of measurement errors is sometimes heavy-tailed, when very large values have a reasonable, in the amount of oil in an oil well, etc. In such situations in which we cannot measure y directly, we can often

Kreinovich, Vladik

310

Author's personal copy Structure and stability of the lamin A tail domain and HGPS mutant  

E-Print Network (OSTI)

online 24 May 2011 Keywords: Laminopathy Structure Mechanics Protein stability Nuclear mechanics a b the confor- mation of the mostly intrinsically disordered tail domain of lamin A. Here we perform replica exchange molecular dynamics simulations of the tail domain and determine an ensemble of semi

Buehler, Markus J.

311

Low Probability Tail Event Analysis and Mitigation in BPA Control Area: Task 2 Report  

SciTech Connect

Task report detailing low probability tail event analysis and mitigation in BPA control area. Tail event refers to the situation in a power system when unfavorable forecast errors of load and wind are superposed onto fast load and wind ramps, or non-wind generators falling short of scheduled output, causing the imbalance between generation and load to become very significant.

Lu, Shuai; Makarov, Yuri V.; McKinstry, Craig A.; Brothers, Alan J.; Jin, Shuangshuang

2009-09-18T23:59:59.000Z

312

DNA search efficiency is modulated by charge composition and distribution in the intrinsically disordered tail  

Science Journals Connector (OSTI)

...the charges on the tail, ?r?, calculated as {sigma}ri...along the tail. Values of ?r? range from 01, where a value of zero indicates that...3 14 . 13 Tran HT Mao A Pappu RV ( 2008 ) Role of backbone-solvent...Crick SL Vitalis A Chicoine CL Pappu RV ( 2010 ) Net charge per residue modulates...

Dana Vuzman; Yaakov Levy

2010-01-01T23:59:59.000Z

313

Otter Tail Power Company - DollarSmart Energy Efficiency Loan Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Otter Tail Power Company - DollarSmart Energy Efficiency Loan Otter Tail Power Company - DollarSmart Energy Efficiency Loan Program Otter Tail Power Company - DollarSmart Energy Efficiency Loan Program < Back Eligibility Agricultural Commercial Industrial Residential Savings Category Other Heating & Cooling Commercial Heating & Cooling Heating Cooling Home Weatherization Commercial Weatherization Sealing Your Home Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Manufacturing Water Heating Maximum Rebate Residential: $20,000 Business: $100,000 Loans may not exceed 80% of the project's total cost Program Info State Minnesota Program Type Utility Loan Program Rebate Amount Residential: $150 - $20,000 Business: $150 - $100,000 Provider Otter Tail Power Company Otter Tail Power Company's DollarSmart Financing Program offers $150 -

314

EA-1928: White-Tailed Deer Management at Brookhaven National Lab, Upton,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: White-Tailed Deer Management at Brookhaven National Lab, 8: White-Tailed Deer Management at Brookhaven National Lab, Upton, New York EA-1928: White-Tailed Deer Management at Brookhaven National Lab, Upton, New York SUMMARY This EA evaluates the potential environmental impacts of a proposal to lower, then maintain the deer herd on the 5,265 acre Brookhaven National Laboratory to levels protective of the ecosystem (estimated to be between 80 and 250 animals) using one or more methods for population growth. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD March 6, 2013 EA-1928: Finding of No Significant Impact White-Tailed Deer Management at Brookhaven National Lab, Upton, New York March 6, 2013 EA-1928: Final Environmental Assessment White-Tailed Deer Management at Brookhaven National Lab, Upton, New York

315

Record of Decision for the Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project (DOE/EIS-0198) (4/28/97)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

13 13 Federal Register / Vol. 62, No. 81 / Monday, April 28, 1997 / Notices export to Canada should be clearly marked with Docket EA-144. Additional copies are to be filed directly with: Kevin J. Lipson, Jolanta Sterbenz, Hogan & Hartson L.L.P. Columbia Square, 555 Thirteenth Street, N.W., Washington, D.C. 20004-1109, (202)637-5600 and Gary A. Jeffries, CNG Energy Services Corporation, One Park Ridge Center, P.O. Box 15746, Pittsburgh, Pennsylvania 15244-0746, (412)787-4268. A final decision will be made on these applications after the environmental impacts have been evaluated pursuant to the National Environmental Policy Act of 1969 (NEPA), and a determination is made by the DOE that the proposed actions will not adversely impact on the reliability of the U.S. electric power supply system.

316

Remedial Action Plan and site design for stabilization of the inactive uranium mill tailings site at Gunnison, Colorado. Attachment 2, Geology report: Final report  

SciTech Connect

Detailed investigations of geologic, geomorphic, and seismic conditions at the Landfill disposal site were conducted. The purpose of these studies was basic site characterization and identification of potential geologic hazards that could affect long-term site stability. Subsequent engineering studies, such as analyses of hydrologic and liquefaction hazards, used the data developed in these studies. The geomorphic analysis was employed in the design of effective erosion protection. Studies of the regional and local seismotectonic setting, which included a detailed search for possible capable faults within a 65-kilometer (km) (40-mile) radius of the site, provided the basis for seismic design parameters. The scope of work performed included the following: Compilation and analysis of previous published and unpublished geologic literature and maps. Review of historical and instrumental earthquake data. Review of site-specific subsurface geologic data, including lithologic and geophysical logs of exploratory boreholes advanced in the site area. Photogeologic interpretations of existing conventional aerial photographs. Ground reconnaissance and mapping of the site region.

Not Available

1992-10-01T23:59:59.000Z

317

Anderson Mill, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Anderson Mill, Texas: Energy Resources Anderson Mill, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 30.4549224°, -97.8058432° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":30.4549224,"lon":-97.8058432,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

318

Kemp Mill, Maryland: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Kemp Mill, Maryland: Energy Resources Kemp Mill, Maryland: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.0389982°, -77.0191436° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.0389982,"lon":-77.0191436,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

319

Mills County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mills County, Iowa: Energy Resources Mills County, Iowa: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 41.0624496°, -95.6457951° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.0624496,"lon":-95.6457951,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

320

Mille Lacs County, Minnesota: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mille Lacs County, Minnesota: Energy Resources Mille Lacs County, Minnesota: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 45.9228403°, -93.6218744° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.9228403,"lon":-93.6218744,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Gang Mills, New York: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Gang Mills, New York: Energy Resources Gang Mills, New York: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 42.1461852°, -77.1116375° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.1461852,"lon":-77.1116375,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

322

Roger Mills County, Oklahoma: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Roger Mills County, Oklahoma: Energy Resources Roger Mills County, Oklahoma: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.616176°, -99.634135° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.616176,"lon":-99.634135,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

323

Quantum Yang-Mills Condensate Dark Energy Models  

E-Print Network (OSTI)

We review the quantum Yang-Mills condensate (YMC) dark energy models. As the effective Yang-Mills Lagrangian is completely determined by the quantum field theory, there is no adjustable parameter in the model except the energy scale. In this model, the equation-of-state (EOS) of the YMC dark energy, $w_y > -1$ and $w_y 0$ into $w_y < -1$, which is slightly suggested by the observations. At the same time, the total EOS in the attractor solution is $w_{tot} = -1$, the universe being the de Sitter expansion in the late stage, and the cosmic big rip is naturally avoided. These features are all independent of the interacting forms.

Zhao, W; Tong, M L

2009-01-01T23:59:59.000Z

324

Cedar Mill, Oregon: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mill, Oregon: Energy Resources Mill, Oregon: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 45.5048397°, -122.7984325° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.5048397,"lon":-122.7984325,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

325

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

71 - 31080 of 31,917 results. 71 - 31080 of 31,917 results. Download EIS-0169-SA-04: Supplement Analysis Yakima Fisheries Project-Construction/modification upgrades to the Prosser Hatchery and the Marion Drain Hatchery Facilities http://energy.gov/nepa/downloads/eis-0169-sa-04-supplement-analysis Download EIS-0355: Amended Record of Decision Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, UT http://energy.gov/nepa/downloads/eis-0355-amended-record-decision Download EIS-0358: Notice of Intent to Prepare an Environmental Impact Statement Construction and Operation of the Proposed Wellton-Mohawk Generating Facility, Yuma County, Arizona http://energy.gov/nepa/downloads/eis-0358-notice-intent-prepare-environmental-impact-statement Download UMore Park Wind Turbine Project Loggerhead Shrike Survey,

326

Calendar Year 2010 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April 27, 2010 April 27, 2010 Audit Report: OAS-RA-10-08 The Department of Energy's Program to Assist Federal Buyers in the Purchasing of Energy Efficient Products April 27, 2010 Audit Letter Report: OAS-RA-L-10-04 Progress in Implementing the Advanced Batteries and Hybrid Components Program under the American Recovery and Reinvestment Act April 23, 2010 Audit Letter Report: OAS-RA-L-10-03 Audit of Moab Mill Tailings Cleanup Project April 16, 2010 Audit Letter Report: OAS-RA-L-10-02 Audit of Fermi National Accelerator Laboratory's NOvA Project April 9, 2010 Audit Report: OAS-RA-10-07 Management Alert on Environmental Management's Select Strategy for Disposition of Savannah River Site Depleted Uranium Oxides April 6, 2010 Audit Letter Report: OAS-RA-L-10-01 The Department of Energy's Management of the NSLS-II Project

327

EM Press Releases | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 26, 2013 February 26, 2013 B Reactor Tour Registration Opens March 2 - Visitors Have Come From 60 Countries Worldwide RICHLAND, Wash. - The U.S. Department of Energy (DOE) will open online registration for the B Reactor National Historic Landmark's 2013 tour season on March 2 at noon. Families with children above the age of 12, along with middle schools and high schools, are invited to sign up for the coveted tour slots. February 25, 2013 Registration Starts Soon for 2013 Hanford Site Public Tours RICHLAND, Wash. - The U.S. Department of Energy (DOE) will open online registration on March 4 at 6 p.m. for tours of the Hanford Site in 2013. February 25, 2013 Moab Mill Tailings Removal Project Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return

328

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 5990 of 26,764 results. 81 - 5990 of 26,764 results. Download EA-1503: Final Environmental Assessment Vermont Electric Power Company Proposed Northern Loop Project http://energy.gov/nepa/downloads/ea-1503-final-environmental-assessment Download EIS-0297: Record of Decision Interconnection of the Griffith Power Plant With the Western Area Power Administration's Parker-Davis and Pacific Northwest-Pacific Southwest Intertie Transmission Systems http://energy.gov/nepa/downloads/eis-0297-record-decision Download EIS-0355: DOE Notice of Availability of the Draft Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah http://energy.gov/nepa/downloads/eis-0355-doe-notice-availability-draft-environmental-impact-statement Download DOE O 420.1B/1C Crosswalk Matrix

329

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 3390 of 26,777 results. 81 - 3390 of 26,777 results. Download EIS-0355: EPA Notice of Availability of the Final Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah http://energy.gov/nepa/downloads/eis-0355-epa-notice-availability-final-environmental-impact-statement Download 2013 Transmission Reliability Program Peer Review- Day 1 Presentations The Transmission Reliability Program Peer Review included six sessions over 2 days on June 27 - 28, 2013. Here are presentations from Day 1 (Sessions I through IV). http://energy.gov/oe/downloads/2013-transmission-reliability-program-peer-review-day-1-presentations Download CE: Compromise Agreement (2013-SE-1429) DOE and CE North America entered into a Compromise Agreement to resolve a

330

Environmental Cleanup Reports | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Cleanup Reports Environmental Cleanup Reports Environmental Cleanup Reports September 8, 2010 Audit Report: OAS-L-10-10 The Audit of Precious Metals at NNSA Sites August 12, 2010 Audit Letter Report: OAS-RA-L-10-05 Decommissioning and Demolition Activities at Office of Science Sites May 25, 2010 Audit Report: OAS-RA-10-10 Waste Processing and Recovery Act Acceleration Efforts for Contact-Handled Transuranic Waste at the Hanford Site May 3, 2010 Audit Report: OAS-L-10-04 The Interim Treatment of Salt Waste at the Savannah River Site April 23, 2010 Audit Letter Report: OAS-RA-L-10-03 Audit of Moab Mill Tailings Cleanup Project April 9, 2010 Audit Report: OAS-RA-10-07 Management Alert on Environmental Management's Select Strategy for Disposition of Savannah River Site Depleted Uranium Oxides

331

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 20070 of 29,416 results. 61 - 20070 of 29,416 results. Page February 14, 2002: Yucca Mountain February 14, 2002Secretary Abraham formally recommends to President Bush that the Yucca Mountain site in Nevada be developed as the nation's first long-term geologic repository for high-level... http://energy.gov/management/february-14-2002-yucca-mountain Article EM Convenes Historic Meeting with Leaders of Tribal Nations DOE Office of Environmental Management (EM) made history by bringing together leaders of eight Tribal Nations to discuss progress in the nuclear cleanup and build partnerships to better shape the future of DOE sites. http://energy.gov/indianenergy/articles/em-convenes-historic-meeting-leaders-tribal-nations Article DOE Awards Technical Assistance Contract for Moab Mill Tailings

332

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 3350 of 26,777 results. 41 - 3350 of 26,777 results. Download EIS-0355: EPA Notification of Availability of the Draft Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah http://energy.gov/nepa/downloads/eis-0355-epa-notification-availability-draft-environmental-impact-statement Download OCC Pamphlet http://energy.gov/gc/downloads/occ-pamphlet Page US e-Chromic US e-Chromic LLC, based in Boulder, Colorado, will use electrochromic technology developed by the National Renewable Energy Laboratory (NREL) to create a new thin film window material that reflects sunlight on demand, making windows more energy efficient while reducing cooling costs for consumers. http://energy.gov/americas-next-top-energy-innovator/us-e-chromic Download Comments on Docket ID: DOE-HQ-2011-0014

333

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

01 - 5110 of 28,905 results. 01 - 5110 of 28,905 results. Download 2Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2009. Data for these indicators are gathered by Field elements... http://energy.gov/hss/downloads/2q-cy2009-pdf-facility-representative-program-performance-indicators Download EIS-0355: Final Environmental Impact Statement Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah http://energy.gov/nepa/downloads/eis-0355-final-environmental-impact-statement Download CX-006718: Categorical Exclusion Determination Naturally Occurring Radioactive Material Storage Facility

334

Hydrogen From MillHydrogen From Mill--Scale Waste Via MetalScale Waste Via Metal--Steam ReformingSteam Reforming INTRODUCTIONINTRODUCTION  

E-Print Network (OSTI)

1 Hydrogen From MillHydrogen From Mill--Scale Waste Via MetalScale Waste Via Metal--Steam ReformingSteam Reforming INTRODUCTIONINTRODUCTION Hydrogen is considered to be the ideal energy carrying medium for fuel and supplying hydrogen to the end user in more reversible, much simpler and far safer ways. Metal-steam

Azad, Abdul-Majeed

335

The rhetoric of economic inquiry in Smith, Whately, and Mill  

E-Print Network (OSTI)

Reflections on a Grant to a Roman Catholic Seminary, 1845???????????????????? 195 Michael Novak and The Spirit of Democratic Capitalism??. 202 Conclusion????????????????????.. 209 IV MILL AND THE ART AND BUSINESS OF LIFE????.. 213 Logic, Liberty... experience. Nevertheless, it often happens that our talk and trade create as many problems as they resolve, promoting or obscuring inequalities, diminishing brother and sisterhood, and crumbling moral foundations for liberty and justice. Hence, for all our...

Gore, David Charles

2005-08-29T23:59:59.000Z

336

Functional Approach to Classical Yang-Mills Theories  

E-Print Network (OSTI)

Sometime ago it was shown that the operatorial approach to classical mechanics, pioneered in the 30's by Koopman and von Neumann, can have a functional version. In this talk we will extend this functional approach to the case of classical field theories and in particular to the Yang-Mills ones. We shall show that the issues of gauge-fixing and Faddeev-Popov determinant arise also in this classical formalism.

P. Carta; D. Mauro

2001-07-10T23:59:59.000Z

337

High-speed EDM milling with moving electric arcs  

Science Journals Connector (OSTI)

A novel high-speed electrical discharge machining (EDM) milling method using moving electric arcs has been proposed in this study. We connected a copper electrode rotating rapidly around its axis and a work piece to a DC power supply to generate a moving electric arc. To ensure high relative speed of any point on the electrode with respect to the work piece, the electrode was shaped like a pipe. It was observed that the electric arcs move rapidly within the discharge gap due to the revolution of the tool electrode, removing the materials on the electrode along the track of the arc roots. To explore the characteristics of machining with moving electric arcs, an EDM milling apparatus was devised. Two planes with approximately the same roughness were machined separately by this equipment and a traditional EDM machine for comparison. It was found that a much higher material removal rate can be easily achieved by EDM milling with moving electric arcs. In the meanwhile, wear of the tool electrode in this new method is negligible, which is greatly favorable for machining accuracy. The microstructures of these surfaces were also investigated for further information.

Fuzhu Han; Yongxain Wang; Ming Zhou

2009-01-01T23:59:59.000Z

338

Biosolids recycling at a pulp and paper mill  

SciTech Connect

The Bio Gro Division of Wheelabrator Water Technologies Inc. has traditionally been involved in recycling biosolids from domestic wastewater treatment plants. The biosolids, or primarily organic residuals that result from the treatment of wastewater, have long been used in agriculture as a soil conditioner, fertilizer, organic lime material and also for other soil fertility practices. It has long been known that residuals from certain industrial wastewater processes are very high in nutrients and organic matter which can also be successfully used in agricultural activities. One of these industrial biosolids with well-documented agricultural value is the organic residual from the treatment of wastewater from pulp and paper mills. Most pulp and paper producers in the US recognize the value of pulp and paper biosolids as a material that can fertilize their own tree stands or can be used in normal agricultural practices. In 1995, Bio Gro entered into a contract with a two large pulp and paper mills in Maine for the management of its pulp and paper biosolids. Bio Gro was responsible for implementing the beneficial use options for a mixture of primary and secondary biosolids from the wastewater treatment process which was combined with combustion ash from the facility`s power generation facilities. The contract included the layout of spreading areas, mixing of the residuals and spreading the material on the sites. This paper will explain the process that Bio Gro employed to manage the pulp and paper biosolids generated at the mill.

Gratton, P.F. [Wheelabrator Water Technologies Inc., Annapolis, MD (United States). Bio Gro Div.; Montgomery, K.L. [Wheelabrator Water Technologies Inc., Fredericksburg, VA (United States). Bio Gro Div.; Page, S.H. [Wheelabrator Water Technologies Inc., Portland, ME (United States). Bio Gro Div.

1997-12-31T23:59:59.000Z

339

Evapotranspiration And Geochemical Controls On Groundwater Plumes At Arid Sites: Toward Innovative Alternate End-States For Uranium Processing And Tailings Facilities  

SciTech Connect

Management of legacy tailings/waste and groundwater contamination are ongoing at the former uranium milling site in Tuba City AZ. The tailings have been consolidated and effectively isolated using an engineered cover system. For the existing groundwater plume, a system of recovery wells extracts contaminated groundwater for treatment using an advanced distillation process. The ten years of pump and treat (P&T) operations have had minimal impact on the contaminant plume primarily due to geochemical and hydrological limits. A flow net analysis demonstrates that groundwater contamination beneath the former processing site flows in the uppermost portion of the aquifer and exits the groundwater as the plume transits into and beneath a lower terrace in the landscape. The evaluation indicates that contaminated water will not reach Moenkopi Wash, a locally important stream. Instead, shallow groundwater in arid settings such as Tuba City is transferred into the vadose zone and atmosphere via evaporation, transpiration and diffuse seepage. The dissolved constituents are projected to precipitate and accumulate as minerals such as calcite and gypsum in the deep vadose zone (near the capillary fringe), around the roots of phreatophyte plants, and near seeps. The natural hydrologic and geochemical controls common in arid environments such as Tuba City work together to limit the size of the groundwater plume, to naturally attenuate and detoxify groundwater contaminants, and to reduce risks to humans, livestock and the environment. The technical evaluation supports an alternative beneficial reuse (brownfield) scenario for Tuba City. This alternative approach would have low risks, similar to the current P&T scenario, but would eliminate the energy and expense associated with the active treatment and convert the former uranium processing site into a resource for future employment of local citizens and ongoing benefit to the Native American Nations.

Looney, Brian B.; Denham, Miles E.; Eddy-Dilek, Carol A.; Millings, Margaret R.; Kautsky, Mark

2014-01-08T23:59:59.000Z

340

BLENDING LOW ENRICHED URANIUM WITH DEPLETED URANIUM TO CREATE A SOURCE MATERIAL ORE THAT CAN BE PROCESSED FOR THE RECOVERY OF YELLOWCAKE AT A CONVENTIONAL URANIUM MILL  

SciTech Connect

Throughout the United States Department of Energy (DOE) complex, there are a number of streams of low enriched uranium (LEU) that contain various trace contaminants. These surplus nuclear materials require processing in order to meet commercial fuel cycle specifications. To date, they have not been designated as waste for disposal at the DOE's Nevada Test Site (NTS). Currently, with no commercial outlet available, the DOE is evaluating treatment and disposal as the ultimate disposition path for these materials. This paper will describe an innovative program that will provide a solution to DOE that will allow disposition of these materials at a cost that will be competitive with treatment and disposal at the NTS, while at the same time recycling the material to recover a valuable energy resource (yellowcake) for reintroduction into the commercial nuclear fuel cycle. International Uranium (USA) Corporation (IUSA) and Nuclear Fuel Services, Inc. (NFS) have entered into a commercial relationship to pursue the development of this program. The program involves the design of a process and construction of a plant at NFS' site in Erwin, Tennessee, for the blending of contaminated LEU with depleted uranium (DU) to produce a uranium source material ore (USM Ore{trademark}). The USM Ore{trademark} will then be further processed at IUC's White Mesa Mill, located near Blanding, Utah, to produce conventional yellowcake, which can be delivered to conversion facilities, in the same manner as yellowcake that is produced from natural ores or other alternate feed materials. The primary source of feed for the business will be the significant sources of trace contaminated materials within the DOE complex. NFS has developed a dry blending process (DRYSM Process) to blend the surplus LEU material with DU at its Part 70 licensed facility, to produce USM Ore{trademark} with a U235 content within the range of U235 concentrations for source material. By reducing the U235 content to source material levels in this manner, the material will be suitable for processing at a conventional uranium mill under its existing Part 40 license to remove contaminants and enable the product to re-enter the commercial fuel cycle. The tailings from processing the USM Ore{trademark} at the mill will be permanently disposed of in the mill's tailings impoundment as 11e.(2) byproduct material. Blending LEU with DU to make a uranium source material ore that can be returned to the nuclear fuel cycle for processing to produce yellowcake, has never been accomplished before. This program will allow DOE to disposition its surplus LEU and DU in a cost effective manner, and at the same time provide for the recovery of valuable energy resources that would be lost through processing and disposal of the materials. This paper will discuss the nature of the surplus LEU and DU materials, the manner in which the LEU will be blended with DU to form a uranium source material ore, and the legal means by which this blending can be accomplished at a facility licensed under 10 CFR Part 70 to produce ore that can be processed at a conventional uranium mill licensed under 10 CFR Part 40.

Schutt, Stephen M.; Hochstein, Ron F.; Frydenlund, David C.; Thompson, Anthony J.

2003-02-27T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Bioenergy Pumps New Life into Pulp and Paper Mills | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills December 13, 2011 - 4:12pm Addthis Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Neil Rossmeissl General Engineer What does this project do? Breathes new life into shuttered factories and mills. Saves and creates jobs. Despite Americans' voracious appetite for paper products -- a staggering 700 pounds per person annually -- America's pulp and paper industry has been struggling as of late due to competition from countries where

342

Bioenergy Pumps New Life into Pulp and Paper Mills | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills December 13, 2011 - 4:12pm Addthis Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Neil Rossmeissl General Engineer What does this project do? Breathes new life into shuttered factories and mills. Saves and creates jobs. Despite Americans' voracious appetite for paper products -- a staggering 700 pounds per person annually -- America's pulp and paper industry has been struggling as of late due to competition from countries where

343

Effects of controlled dog hunting on movements of female white-tailed deer.  

SciTech Connect

D'Angelo, Gino, J., John C. Kilgo, Christopher E. Comer, Cory D. Drennan, David A. Osborn, and Karl V. Miller. 2003. Effects of controlled dog hunting on movements of female white-tailed deer. In: Proceedings of the Annu. Conf. Southeast. Assoc. Fish and Wildl. Agencies. 57:317-325. This article explores the relationship between controlled dog hunting and the movements of female white tailed deer at the Savannah River Site, South Carolina. The data suggests that short term, controlled dog hunting has little long-term effect on adult, female white-tailed deer movement on the Savannah River Site.

D'Angelo, Gino, J.; Kilgo, John, C.; Comer, Christopher, E.; Drennan, Cory, D.; Osborn, David, A.; Miller, Karl, V.

2003-12-31T23:59:59.000Z

344

Low energy milling method, low crystallinity alloy, and negative electrode composition  

DOE Patents (OSTI)

A method of making nanostructured alloy particles includes milling a millbase in a pebble mill containing milling media. The millbase comprises: (i) silicon, and (ii) at least one of carbon or a transition metal, and wherein the nanostructured alloy particles are substantially free of crystalline domains greater than 50 nanometers in size. A method of making a negative electrode composition for a lithium ion battery including the nanostructured alloy particles is also disclosed.

Le, Dihn B; Obrovac, Mark N; Kube, Robert Y; Landucci, James R

2012-10-16T23:59:59.000Z

345

Otter Tail Power Co (North Dakota) | Open Energy Information  

Open Energy Info (EERE)

North Dakota North Dakota Utility Id 14232 References Energy Information Administration.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Service GS 50-401 Commercial Large General Service LGS 50-603 Commercial Large General Service Time of Day 50-611 Commercial Residential Service RS 50-101 Residential Small General Service SGS 50-404 Commercial Average Rates Residential: $0.0772/kWh Commercial: $0.0688/kWh Industrial: $0.0604/kWh The following table contains monthly sales and revenue data for Otter Tail Power Co (North Dakota). Month RES REV (THOUSAND $) RES SALES (MWH) RES CONS COM REV (THOUSAND $) COM SALES (MWH) COM CONS IND_REV (THOUSAND $) IND SALES (MWH) IND CONS OTH REV (THOUSAND $) OTH SALES (MWH) OTH CONS TOT REV (THOUSAND $) TOT SALES (MWH) TOT CONS

346

Vertically and Horizontally Mounted Wind Mills : Wind Energy Production in Tampere University of Applied Sciences.  

E-Print Network (OSTI)

??The purpose of this thesis was to gather information about vertical and horizontal wind mills and to complete a research on wind power production by (more)

Evdokimova, Ekaterina

2013-01-01T23:59:59.000Z

347

Phase evolution in carbide dispersion strengthened nanostructured copper composite by high energy ball milling  

SciTech Connect

In this study, high-energy ball milling was applied to synthesis in situ nanostructured copper based composite reinforced with metal carbides. Cu, M (M=W or Ti) and graphite powder mixture were mechanically alloyed for various milling time in a planetary ball mill with composition of Cu-20vol%WC and Cu-20vol%TiC. Then the as-milled powder were compacted at 200 to 400 MPa and sintered in a vacuum furnace at 900 Degree-Sign C. The results of X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy analysis showed that formation of tungsten carbides (W{sub 2}C and WC phases) was observed after sintering of Cu-W-C mixture while TiC precipitated in as-milled powder of Cu-Ti-C composite after 5 h and become amorphous with longer milling. Mechanism of MA explained the cold welding and fracturing event during milling. Cu-W-C system shows fracturing event is more dominant at early stage of milling and W particle still existed after milling up to 60 h. While in Cu-Ti-C system, cold welding is more dominant and all Ti particles dissolved into Cu matrix.

Hussain, Zuhailawati; Nur Hawadah, M. S. [School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

2012-09-06T23:59:59.000Z

348

Application of hazard analysis (HACCP) in starch production by the wet milling of maize.  

E-Print Network (OSTI)

??This study is based on the Hazard Analysis in the Wet Milling of maize for the production of starch at the Bellville plant of African (more)

Samuels, R. C.

1993-01-01T23:59:59.000Z

349

Contamination issues in a continuous ethanol production corn wet milling facility  

Science Journals Connector (OSTI)

Low ethanol yields and poor yeast viability were investigated at a continuous ethanol production corn wet milling facility. Using starch slurries and recycle streams...

Esha Khullar; Angela D. Kent

2013-05-01T23:59:59.000Z

350

Adaptive Detached Eddy Simulation of a Vertical Tail with Active Flow  

NLE Websites -- All DOE Office Websites (Extended Search)

Adaptive Detached Eddy Simulation of a Vertical Tail with Active Flow Control Adaptive Detached Eddy Simulation of a Vertical Tail with Active Flow Control Adaptive Detached Eddy Simulation of a Vertical Tail with Active Flow Control PI Name: Kenneth Jansen PI Email: jansenke@colorado.edu Institution: University of Colorado Allocation Program: INCITE Allocation Hours at ALCF: 40 Million Year: 2012 Research Domain: Engineering The use of fuel-and its accompanying costs-has become an increasing concern in many industries. Researchers are examining the issue of fuel reduction in commercial jet aircraft from the perspective of redesign. By redesigning the vertical tail of a commercial jet, they hope to reduce jet fuel use by 0.5%, resulting in annual savings of $300 million. Using -synthetic commercial jet aircraft, the team will perform a series

351

Inertial and Aerodynamic Tail Steering of a Meso-scale Legged Robot  

E-Print Network (OSTI)

a constant yaw disturbance to a robotic system, but this mayYaw data for the tail and body were recorded using an OptiTrack 1 motion capture system.

Kohut, Nicholas Jospeh

2013-01-01T23:59:59.000Z

352

Mineralogy and Geochemistry of Pb, Zn and Ag Mine Tailings Originating From Carbonate-Rich Deposits  

E-Print Network (OSTI)

Mining for silver, lead, zinc, and copper in Zimapan, Hidalgo State, Mexico has been ongoing since 1576. Unsecured tailings heaps and associated acid mine drainage have presented problems related to soil quality, water quality, and dust emission...

McClure, Roberta 1981-

2012-11-29T23:59:59.000Z

353

The long tail: a usage analysis of pre-1993 print biomedical journal literature  

E-Print Network (OSTI)

volumes, will likely require usage studies and the knowledgeThe long tail: a usage analysis of pre-1993 print biomedicalThe research analyzes usage of a major biomedical librarys

Starr, Susan S.; Williams, Jeff

2008-01-01T23:59:59.000Z

354

Blade tonal noise reduction using tail articulation at high Reynolds number  

E-Print Network (OSTI)

The biologically inspired method of tail articulation is investigated as a means of reducing tonal noise due to the stator wake blade interaction in underwater vehicles. This work is experimental in nature and conducted ...

Macumber, Daniel Lee, 1981-

2005-01-01T23:59:59.000Z

355

Long Tails vs. Superstars: The Effect of Information Technology on Product Variety and Sales Concentration Patterns  

E-Print Network (OSTI)

The Internet and related information technologies are transforming the distribution of product sales across products, and these effects are likely to grow in coming years. Both the Long Tail and the Superstar effect are ...

Brynjolfsson, Erik

356

Environmental Risk Management at Uranium Tailings Ponds in Mailuu-Suu, Kyrgyzstan  

Science Journals Connector (OSTI)

The complex of natural and geotechnical factors, disaster scenarios and conditions of reliable rehabilitation of uranium tailings in Mayluu Suu is considered. The forecast of consequences of destruction of the...

U. G. Aleshyn; I. A. Torgoev; G. Shmidt

2002-01-01T23:59:59.000Z

357

Habitat selection and movement patterns of cattle and white-tailed deer in a temperate savanna  

E-Print Network (OSTI)

This study investigated the use of high resolution satellite imagery in research involving habitat selection, and movement patterns of white-tailed deer and cattle in a semi-arid landscape. Vegetation classification was developed based on Ikonos...

Depew, Jarrod Jason

2005-11-01T23:59:59.000Z

358

Assessment of the urban public's knowledge of white-tailed deer management in two Texas communities  

E-Print Network (OSTI)

Urbanization throughout much of Texas has resulted in diminished wildlife habitat, resulting from fragmented landscapes. Several previous studies addressed the publics attitudes concerning the most acceptable white-tailed deer management techniques...

Alderson, Jessica Lynn

2009-05-15T23:59:59.000Z

359

Comparative foraging ecology of white-tailed deer and Angora goats on the Edwards Plateau, Texas  

E-Print Network (OSTI)

This study investigated how seasonal patterns in forage abundance and quality influenced the feeding behavior of white-tailed deer ( Odocolieus virginianus) and Angora goats; two similar-sized ungulates with different digestive morphologies. I...

Jacobson, Roy Arthur

2012-06-07T23:59:59.000Z

360

White-tailed deer population dynamics and management on the Lyndon B. Johnson Space Center  

E-Print Network (OSTI)

White-tailed deer (Odocoileus virginianus) numbers on the National Aeronautics and Space Administration's (NASA) Johnson Space Center (JSC) in Houston, Texas have increased in recent years and are a cause of urban-related accidents (e.g., deer...

Whisenant, Shane Weston

2004-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Photoperiod and melatonin effects on growth and endocrine response in white-tailed deer (Odocoileus virginianus)  

E-Print Network (OSTI)

Captive white-tailed deer (Odocoileus virginianus) fawns (4-11 mo) were utilized to establish the role of endogenous versus exogenous melatonin on patterns of growth. A deuterium oxide (D20) dilution system was developed with I I fawns...

Moritz, Jonathan Theodore

2012-06-07T23:59:59.000Z

362

Multivariate Extremes Dependence Comparison Stochastic Tail Order Back to Multivariate Extremes Dependence Comparison of Multivariate  

E-Print Network (OSTI)

Multivariate Extremes Dependence Comparison Stochastic Tail Order Back to Multivariate Extremes Dependence Comparison of Multivariate Extremes Haijun Li Department of Mathematics Washington State University IWAP12, Jerusalem Haijun Li Dependence Comparison of Multivariate Extremes IWAP12, Jerusalem 1

Li, Haijun

363

Improvements to laboratory-scale maize wet-milling procedures  

Science Journals Connector (OSTI)

The wet milling of maize is difficult to study in the laboratory because some of the required separation steps are challenging to implement at bench-scale. This work was conducted to develop an improved 100-g wet-milling procedure that better models the industrial process. Several separation steps were modified from previously reported methods. Among the changes, germ was recovered by a flotation/skimming technique that is normally used on larger-scale procedures. Starch was recovered by tabling, but the flow profile at the end of the table was changed to reduce gluten settling and the partitioning and pumping of slurry fractions was changed to allow the tabling process to begin immediately after fiber recovery. Gluten was dewatering directly on the table overflow, and starch was recovered from the table before drying. These modifications eliminated some problems associated with other procedures, e.g. the scraping of tabled starch to reduce protein contamination, the loss of germ due to size reduction, and the separate recovery of coarse and fine fiber fractions. Compared with routine tabling methods, the modified method used in this work produced starch with less protein (0.42 versus 0.55% for the maize variety tested); however, the improvement was achieved at the expense of a slightly lower starch yield (64.4 versus 65.4%). Standard deviations for the product yields were 0.28% for starch, 0.27% for gluten, 0.24% for fiber, 0.13% for germ, and 0.07% for total solubles. The procedure will be beneficial for some maize wet-milling experiments.

Michael K. Dowd

2003-01-01T23:59:59.000Z

364

Low Probability Tail Event Analysis and Mitigation in the BPA Control Area  

SciTech Connect

This report investigated the uncertainties with the operations of the power system and their contributions to tail events, especially under high penetration of wind. A Bayesian network model is established to quantify the impact of these uncertainties on system imbalance. The framework is presented for a decision support tool, which can help system operators better estimate the need for balancing reserves and prepare for tail events.

Lu, Shuai; Brothers, Alan J.; McKinstry, Craig A.; Jin, Shuangshuang; Makarov, Yuri V.

2010-10-31T23:59:59.000Z

365

Follicular changes and reproductive hormones in captive white- tailed deer during the breeding season  

E-Print Network (OSTI)

FOLLICULAR CHANGES AND REPRODUCTIVE HORMONES IN CAPTIVE WHITE-TAILED DEER DURING THE RREEDING SEASON A Thesis by TIMOTHY GERARD BIEDIGER Submitted to the Graduate College of Texas ALM University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 1986 Major Subject: Veterinary Physiology FOLLICULAR CHANGES AND REPRODUCTIVE HORMONES IN CAPTIVE WHITE-TAILED DEER DURING THE BREEDING SEASON A Thesis by TIMOTHY GERARD BIEDIGER Approved as to style and content...

Biediger, Timothy Gerard

2012-06-07T23:59:59.000Z

366

Complement fixation antigen production for Theileria in white-tailed deer (Odocoileus virginianus)  

E-Print Network (OSTI)

COMPLEMENT FIXATION ANTIGEN PRODUCTION FOR THEILERIA IN WHITE- TAILED DEER (ODOCOILEUS VIR GINIANUS) A Thesis By FAISAL ABDEI GADIR Submitted to the Graduate College of the Texas ARM University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE January 1968 Major Subject: Veterinary Microbiology COMPLEMENT FIXATION ANTIGEN PRODUCTION FOR THEILERIA IN WHITE- TAILED DEER (ODOCOILEUS VIRGINIANUS) A Thesis By FAISAL ABDEL GADIR Approved as to style and content...

Gadir, Faisal Abdel

2012-06-07T23:59:59.000Z

367

Movements of white-tailed deer, Odocoileus virginianus Texanus (Mearns), on the Welder Wildlife Refuge  

E-Print Network (OSTI)

MOVEMENTS OF WHITE-TAILED DEER, ODOCOILEUS VIRGINIANUS TEXANUS (MEARNS), ON THE WELDER WILDLIFE REFUGE A Thesis By EDWIN DARYL MICHAEL Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE January, 1963 Major Subject: Wildlife Management MOVEMENTS OF WHITE-TAILED DEER, ODOCOILEUS VIRGINIANUS TEXANUS (MaARNS), Ol THE WELDER WILDLIFE REFUGE A Thesis EDWIN DARYL MICHAEL Appr e as to tyle a...

Michael, Edwin Daryl

2012-06-07T23:59:59.000Z

368

Population characteristics and diets of two white-tailed deer herds with contrasting densities  

E-Print Network (OSTI)

POPULATION CHARACTERISTICS AND DIETS QF TWQ WHITE-TAILED DEER HERDS WITH CONTRASTING DENSITIES A Thesis by DAVID ALAN TILTON Submitted to the Gnaduace College of Texas AAM Univer sity in partial fulfillmer. t of the r equi' ements... for the degree of' MASTER OF SCIENCE December l9B5 Major Subject: Wildlife and Fisheries Sciences POPULATION CHARACTERISTICS AND DIETS OF TWO WHITE-TAILED DEER HERDS WITH CONTRASTING DENSITIES A Thesis by DAVID ALAN TILTON Approved as to style...

Tilton, David Alan

2012-06-07T23:59:59.000Z

369

Some grazing system impacts on white-tailed deer on the northern Rio Grande Plain  

E-Print Network (OSTI)

SOME GRAZING SYSTEM IMPACTS ON WHITE-TAILED DEER ON THE NORTHERN RIO GRANDE PLAIN A Thesis by HUGH DOUGLAS PATRICKSON Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement for the degree... of MASTER OF SCIENCE May 1983 Major Subject: Wildlife and Fisheries Sciences SOME GRAZING SYSTEM IMPACTS ON WHITE-TAILED DEER ON THE NORTHERN RIO GRANDE PLAIN A Thesis by HUGH DOUGLAS PATRICKSON Approved as to style and content by: (Chairman...

Patrickson, Hugh Douglas

2012-06-07T23:59:59.000Z

370

The stresses in the reels of cold reduction mills  

Science Journals Connector (OSTI)

An investigation into the stress distribution in the reels of a cold reduction mill is described. The results indicated that the distribution is nearly axially symmetrical, and it was concluded that Inglis's theory of wire winding might be adapted to give a reasonable approximation of the stresses over the surface of a reel drum in the form of a thick-walled tube. This has been confirmed by the direct measurement of tangential stress in the lap of a coil next to the reel.

R B Sims; J A Place

1953-01-01T23:59:59.000Z

371

Fusion hierarchies for N = 4 superYang-Mills theory  

E-Print Network (OSTI)

We employ the analytic Bethe Anzats to construct eigenvalues of transfer matrices with finite-dimensional atypical representations in the auxiliary space for the putative long-range spin chain encoding anomalous dimensions of all composite single-trace gauge invariant operators of the maximally supersymmetric Yang-Mills theory. They obey an infinite fusion hierarchy which can be reduced to a finite set of integral relations for a minimal set of transfer matrices. This set is used to derive a finite systems of functional equations for eigenvalues of nested Baxter polynomials.

A. V. Belitsky

2008-03-13T23:59:59.000Z

372

Neumann domination for the Yang-Mills heat equation  

E-Print Network (OSTI)

Long time existence and uniqueness of solutions to the Yang-Mills heat equation have been proven over a compact 3-manifold with boundary for initial data of finite energy. In the present paper we improve on previous estimates by using a Neumann domination technique that allows us to get much better pointwise bounds on the magnetic field. As in the earlier work, we focus on Dirichlet, Neumann and Marini boundary conditions. In addition, we show that the Wilson Loop functions, gauge invariantly regularized, converge as the parabolic time goes to infinity.

Nelia Charalambous; Leonard Gross

2014-05-30T23:59:59.000Z

373

Energy efficiency improvement and cost saving opportunities for the Corn Wet Milling Industry: An ENERGY STAR Guide for Energy and Plant Managers  

E-Print Network (OSTI)

Alkali and Conventional Corn Wet-Milling: 100-g Procedures.Membrane Application in Corn Wet Milling Proceedings of theP. H. (1992). Technology of Corn Wet Milling and Associated

Galitsky, Christina; Worrell, Ernst; Ruth, Michael

2003-01-01T23:59:59.000Z

374

Mathematical circulation model for the blood-flow-heat-loss relationship in the rat tail  

Science Journals Connector (OSTI)

A mathematical model for the heat-loss-blood-flow relationship is developed for the rat tail. When supplied with experimental values of heat loss and blood flow, the model allows one to compute the distribution of flow in deep and cutaneous vessels as a function of body core and tail temperature and to determine the savings in heat loss that result from alterations in the pattern of circulation and from counter-current heat transfer. Blood flow in the cutaneous and deep lying veins of the tail is controlled by both central and local temperatures and increases fairly linearly with deep body temperature. However, the distribution of blood flow in the tail is controlled only by local tail temperature and is independent of deep body temperature. The change in venous distribution of flow has a great impact on the conservation of heat and can reduce the heat loss from the circulating blood by more than 50% when venous return is directed to deep lying veins. On the other hand, counter-current heat transfer is of only minor importance in the control of heat loss from the tail, resulting at most in a 10% saving of heat loss, and that only at the smallest rate of blood flow.

E R Raman; V J Vanhuyse; M F Roberts

1987-01-01T23:59:59.000Z

375

Vertical Tail Buffeting Alleviation Using Piezoelectric Actuators - Some Results of the Actively Controlled Response Of Buffet-Affected Tails (ACROBAT) Program  

Science Journals Connector (OSTI)

A 1/6-scale F-18 wind-tunnel model was tested in the Transonic Dynamics Tunnel at the NASA Langley Research Center as part of the Actively Controlled Response of Buffet-Affected Tails (ACROBAT) program to assess the use of active controls in reducing ...

Moses Robert W.

1997-03-01T23:59:59.000Z

376

A loop of SU(2) gauge fields stable under the Yang-Mills flow  

E-Print Network (OSTI)

A loop of SU(2) gauge fields stable under the Yang-Mills flow Daniel Friedan Department of Physics The gradient flow of the Yang-Mills action acts pointwise on closed loops of gauge fields. We construct in perturbations of the loop. The stable loop might play a role in physics as a classical winding mode

Friedan, Daniel

377

Seasonal and Regional Contributors of 1-Hydroxypyrene among Children near a Steel Mill  

Science Journals Connector (OSTI)

...neighborhood of a steel mill located in the southern...sites were chosen based on wind direction and distance...included model II plus south wind; and model IV included...after adjusting for south wind from a steel mill (model III): 30.2...

Mi-Sun Lee; Ki-Do Eum; Kiyoung Lee; Ho Kim; and Domyung Paek

2009-01-01T23:59:59.000Z

378

Modeling of the wet end part of a paper mill with Dymola  

Science Journals Connector (OSTI)

This paper describes the ongoing research on the physical modeling of AssiDomn paper mill in Frvi (Sweden). This project includes the developing of a Modelica base library for thermohydraulic, pulp and paper systems. Up to now, the model ... Keywords: modeling, object-oriented, paper mill

Gianantonio Bortolin; Stefan Borg; Per Olof Gutman

2004-04-01T23:59:59.000Z

379

Effect of Soya Flour on the Lactic Fermentation of Milled Corn  

Science Journals Connector (OSTI)

...Lactic Fermentation of Milled Corn I. A. AKINRELE, A. MAKANJU...for publication 18 November 1968 Corn (Zea mays) is principally eaten...in Nigeria consists of steeping corn in water, then wet-milling, and finally allowing it to turn...

I. A. Akinrele; A. Makanju; C. C. Edwards

1969-01-01T23:59:59.000Z

380

Enviro-Friendly Hydrogen Generation From Steel Mill-Scale via Metal-Steam Reforming  

E-Print Network (OSTI)

Enviro-Friendly Hydrogen Generation From Steel Mill-Scale via Metal-Steam Reforming Abdul of certain metals with steam, called metal- steam reforming (MSR). This technique does not gen- erate any: hydrogen generation; metal-steam reform- ing; mill-scale; nanoscale iron; electron microscopy Hydrogen

Azad, Abdul-Majeed

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Grant Title: GENERAL MILLS -CHAMPIONS FOR HEALTHY KIDS GRANT Funding Opportunity Number: N/A  

E-Print Network (OSTI)

Grant Title: GENERAL MILLS - CHAMPIONS FOR HEALTHY KIDS GRANT Funding Opportunity Number: N, developed the Champions for Healthy Kids grant program in 2002. Each year since inception, the General Mills Foundation awards 50 grants of $10,000 each to community-based groups that develop creative ways to help

Farritor, Shane

382

Color Removal from Pulp Mill Effluent Using Coal Ash Produced from Georgia Coal Combustion Power Plants  

E-Print Network (OSTI)

/0702/citing-global- warming-georgia-judge-blocks-coal-plant/picture1.jpg/5307532-1-eng-US/picture1.jpgColor Removal from Pulp Mill Effluent Using Coal Ash Produced from Georgia Coal Combustion Power color from pulp mill effluent using coal ash. Prevent coal ash adsorbent from leaching arsenic

Hutcheon, James M.

383

Command Shaping for Micro-Mills and CNC Controllers Joel Fortgang*, William Singhose*, Juan de Juanes Marquez**, Jesus Perez**  

E-Print Network (OSTI)

Command Shaping for Micro-Mills and CNC Controllers Joel Fortgang*, William Singhose*, Juan de-mill which can be implemented with a standard CNC controller. The robustness of this technique to modelling

Singhose, William

384

Experimental and computational investigation of end-milling and development of a simulation model describing the machining process  

E-Print Network (OSTI)

1 Experimental and computational investigation of end-milling and development of a simulation model simulation model, which allows the selection of optimum cutting conditions in end-milling processes, taking

Aristomenis, Antoniadis

385

DOE - Office of Legacy Management -- Rifle Mill Site - CO 0-11  

Office of Legacy Management (LM)

Rifle Mill Site - CO 0-11 Rifle Mill Site - CO 0-11 FUSRAP Considered Sites Site: Rifle Mill Site (CO.0-11 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Rifle, Colorado, New Processing Site Rifle, Colorado, Old Processing Site Documents Related to Rifle Mill Site 2009 Verification Monitoring Report for the Old and New Rifle, Colorado, Processing Sites; LMS/RFO/RFN/S05775; September 2009. This report evaluates and interprets groundwater monitoring data collected at the Old and New Rifle Sites and assesses the progress of meeting the compliance strategy for groundwater cleanup. 2012 Annual Site Inspection and Monitoring Report for Uranium Mill

386

Experimental Research on Ultrasonic Vibration Milling Metal Matrix Composites SiCp/Al  

SciTech Connect

Although particle reinforced metal matrix composites possess excellent physical properties, its machining performance is rather bad because of its specific structure. It is difficult to obtain good cutting effect by traditional machining method. So machining has become the bottleneck which strictly restricts its industry application. This paper mainly focuses on both wear characteristics of different tool materials and material removal mechanism in ultrasonic milling high volume fraction particle reinforced metal matrix composites SiCp/Al. An acoustic device for ultrasonic vibration milling was developed to introduce the ultrasonic vibration into the traditional machining process. Through the contrast experiment of traditional milling and ultrasonic vibration milling SiCp/Al, the mechanism of tool wear and characteristics of surface topography were analyzed. The experimental results showed that the surface integrity and tool life in the ultrasonic vibration milling SiCp/Al were improved.

Gao, G. F.; Zhao, B.; Xiang, D. H.; Zhao, M. L. [School of Mechanical Engineering, Henan Polytechnic University, Jiaozuo (China)

2011-01-17T23:59:59.000Z

387

Tail-ion transport and Knudsen layer formation in the presence of magnetic fields  

SciTech Connect

Knudsen layer losses of tail fuel ions could reduce significantly the fusion reactivity of highly compressed cylindrical and spherical targets in inertial confinement fusion (ICF). With the class of magnetized ICF targets in mind, the effect of embedded magnetic fields on Knudsen layer formation is investigated for the first time. The modified energy scaling of ion diffusivity in magnetized hot spots is found to suppress the preferential losses of tail-ions perpendicular to the magnetic field lines to a degree that the tail distribution can be at least partially, if not fully, restored. Two simple threshold conditions are identified leading to the restoration of fusion reactivity in magnetized hot spots. A kinetic equation for tail-ion transport in the presence of a magnetic field is derived, and solutions to the equation are obtained numerically in simulations. Numerical results confirm the validity of the threshold conditions for restored reactivity and identify two different asymptotic regimes of the fusion fuel. While Knudsen layer formation is shown to be suppressed entirely in strongly magnetized cylindrical hot spot cavities, uniformly magnetized spherical cavities demonstrate remnant, albeit reduced, levels of tail-ion depletion.

Schmit, P. F. [Sandia National Laboratories, MS 1186, P.O. Box 5800, Albuquerque, New Mexico 87185-1186 (United States)] [Sandia National Laboratories, MS 1186, P.O. Box 5800, Albuquerque, New Mexico 87185-1186 (United States); Molvig, Kim; Nakhleh, C. W. [Los Alamos National Laboratory, MS B259, P.O. Box 1663, Los Alamos, New Mexico 87545 (United States)] [Los Alamos National Laboratory, MS B259, P.O. Box 1663, Los Alamos, New Mexico 87545 (United States)

2013-11-15T23:59:59.000Z

388

Integration of reclamation and tailings management in oil sands surface mine planning  

Science Journals Connector (OSTI)

Abstract The processing of oil sands generates large volumes of slurry, known as tailings, that is impounded in tailings ponds. Oil sands operators are committed to develop reclamation plans to ensure that the mine site is restored to a natural or economically usable landscape. Since most of the material that is needed for capping of the tailings pond is produced in mining operation, it is reasonable to include material requirement for reclamation as part of mine planning. In this paper, an integrated long-term mine planning model is proposed that includes tailings capacity and reclamation material requirements. A mixed integer linear programming (MILP) model is developed to test the performance of the proposed model. The MILP model is coded in Matlab. It is verified by carrying out a case study on an actual oil sands dataset, and has resulted in an integer solution within a 2% gap to the optimality. The resulted production schedule meets the capacity constraint of the tailings facility and guarantees the production of the required reclamation material.

Mohammad Mahdi Badiozamani; Hooman Askari-Nasab

2014-01-01T23:59:59.000Z

389

Lake Mills Light & Water | Open Energy Information  

Open Energy Info (EERE)

Water Water Jump to: navigation, search Name Lake Mills Light & Water Place Wisconsin Utility Id 10605 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Cp-1 Small Power Service between 50kW and 200kW Demand Primary Metering and Transformer Ownership Discount with Parallel Generation(20kW or less) Industrial Cp-1 Small Power Service between 50kW and 200kW Demand Primary Metering and Transformer Ownership Discount Industrial

390

Protect and Restore Mill Creek Watershed : Annual Report CY 2005.  

SciTech Connect

The Nez Perce Tribe Department of Fisheries Resource Management, Watershed Division approaches watershed restoration with a ridge-top to ridge-top approach. The Nez Perce Tribe and the Nez Perce National Forest (NPNF) have formed a partnership in completing watershed restoration activities, and through this partnership, more work is accomplished by sharing funding and resources in our effort. The Nez Perce Tribe began watershed restoration projects within the Mill Creek watershed of the South Fork Clearwater River in 2000. Progress has been made in restoring the watershed through excluding cattle from critical riparian areas through fencing. Starting in FY 2002, continuing into 2004, trees were planted in riparian areas in the meadow of the upper watershed. In addition, a complete inventory of culverts at road-stream crossings was completed. Culverts have been prioritized for replacement to accommodate fish passage throughout the watershed, and one high priority culvert was replaced in 2004. Maintenance to the previously built fence was also completed.

McRoberts, Heidi

2006-03-01T23:59:59.000Z

391

Titania Prepared by Ball Milling: Its Characterization and Application as Liquefied Petroleum Gas Sensor  

E-Print Network (OSTI)

Present paper reports the LPG sensing of TiO2 obtained through ball milling. The milled powder was characterized by XRD, TEM and UV-visible spectroscopy. Further the ball milled powder was compressed in to pellet using hydraulic press. This pellet was investigated with the exposure of LPG. Variations in resistance with exposure of LPG to the sensing pellet were recorded. The sensitivity of the sensor was ~ 11 for 5 vol.% of LPG. Response and recovery times of the sensor were ~ 100 and 250 sec. The sensor was quite sensitive to LPG and results were found reproducible within 91%.

Yadav, B C; Singh, Satyendra; Yadav, T P

2012-01-01T23:59:59.000Z

392

A model for feed forward control of chatter in end milling  

E-Print Network (OSTI)

research topic over the years, as it is widely used in industry due to its suitability for machining of complex shapes. In 1975, Tlusty and MacNeil [6] published a paper on the dynamics of the cutting forces in end milling. The paper explained... coefficient was used there to describe the milling process. In order to have stability regions with broad information about a range of milling cuts, Smith and Tlusty (1993) [9] developed an efficient simulation program for chatter. An improved model...

Dassanayake, Achala Viomy

2002-01-01T23:59:59.000Z

393

Using treated municipal wastewater in a linerboard mill -- legal, political, and technical issues  

SciTech Connect

When plans to expand production at an antiquated mill were jeopardized by an inadequate source of process water, the mill explored the possibility of producing first-quality linerboard using treated municipal wastewater. This paper outlines the legal, technical, and political issues encountered in developing a plan that would allow the mill to use effluent from a municipal wastewater treatment system. The technology is available to make reuse of municipal wastewater feasible, as evidence by the closed-loop delivery and discharge system describe in this report. Nevertheless, legal and political concerns make the implementation process arduous and time consuming.

Bowen, W. (Montville Water Pollution Control Authority, Montville, CT (United States)); Scogin, R. (Rand-Whitney Containerboard, L.P., Montville, CT (United States)); Cobery, J.E. (Bingham, Dana and Gould, Boston, MA (United States))

1994-10-01T23:59:59.000Z

394

The most important thing is the tail: Multitudinous functionalities of intrinsically disordered protein termini  

Science Journals Connector (OSTI)

Abstract Many functional proteins do not have well-folded structures in their substantial parts, representing hybrids that possess both ordered and disordered regions. Disorder is unevenly distributed within these hybrid proteins and is typically more common at protein termini. Disordered tails are engaged in a wide range of functions, some of which are unique for termini and cannot be found in other disordered parts of a protein. This review covers some of the key functions of disordered protein termini and emphasizes that these tails are not simple flexible protrusions but are evolved to serve.

Vladimir N. Uversky

2013-01-01T23:59:59.000Z

395

Population dynamics and predator-prey relationships of the Carmen Mountains white-tailed deer  

E-Print Network (OSTI)

POPULATION DYNAMICS AND PREDATOR-PREY RELATIONSHIPS OF THE CARMEN MOUNTAINS WHITE-TAILED DEER A Thesis by DON EUGENE ATKINSON Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree... of MASTER OF SCIENCE December 1976 Major Subject: Wildlife and Fisheries Sciences POPULATION DYNAMICS AND PREDATOR-PREY RELATIONSHIPS OF THE CARMEN MOUNTAINS NHITE-TAILED DEER A Thesis by DON EUGENE ATKINSON Approved as to style a by: Cha i e Head...

Atkinson, Don Eugene

2012-06-07T23:59:59.000Z

396

A comparison of utilization of two forages by sheep, goats, and white-tailed deer  

E-Print Network (OSTI)

A COMPARISON OF UTILIZATION OF TWO FORAGES BY SHEEP, GOATS, AND WHITE-TAILED DEER A Thesis by MARSHA LYNN ALLEN Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE May 1981 Major Subject: Animal Science A COMPARISON OF UTILIZATION OF TWO FORAGES BY SHEEP, GOATS, AND WHITE-TAILED DEER A Thesis by MARSHA LYNN ALLEN Approv d as to style and content by (Co-Chairman of Commi. ttee) (Co...

Allen, Marsha Lynn

2012-06-07T23:59:59.000Z

397

Observation of the cervix and artificial insemination in captive white-tailed deer  

E-Print Network (OSTI)

OBSERVATION OF THE CERVIX AliD ARTIFICIAL INSEMINATION IN CAPTIVE WHITE-TAILED DEER A Thesis by STEPHEN JOHN MAGYAR Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE August 1986 Major Subject: Veterinary Physiology OBSERVATION OF THE CERVIX AND ARTIFICIAL INSEMINATION IN CAPTIVE WHITE-TAILED DEER A Thesis by STEPHEN JOHN MAGYAR Approved as to style and content by: Stephen W. J. Sea er (Chairman of Co...

Magyar, Stephen John

2012-06-07T23:59:59.000Z

398

The botanical composition of the diet of white-tailed deer  

E-Print Network (OSTI)

! ' . . (. , member / / j///z' ( ember 1&iembe r Hember Fiembe r December 1972 ABSTRACT The Botanical Composit1on of the Diet of White-tailed Deer. (December 1972) James Michael McCollum, B. S, , Texas MM Un1versity Directed by: Dr. M. M. Kothmann A. 9... of the diets of the white-tailed deer, and to evaluate the competition of deer with domestic livestock. The study was conducted on 7 pa tures used in a High-intens1ty, Low-frequency grazing system. The amount of available forage was de- termined prior...

McCollum, James Michael

2012-06-07T23:59:59.000Z

399

DOE - Office of Legacy Management -- Monument Valley Mill Site - AZ 0-01  

Office of Legacy Management (LM)

Monument Valley Mill Site - AZ 0-01 Monument Valley Mill Site - AZ 0-01 FUSRAP Considered Sites Site: Monument Valley Mill Site (AZ.0-01) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Monument Valley, Arizona, Processing Site Documents Related to Monument Valley Mill Site Data Validation Package for the June 2009 Water Sampling at the Monument Valley, Arizona, Processing Site; LMS/MON/S0609; October 2009 Natural and Enhanced Attenuation of Soil and Ground Water at Monument Valley, Arizona, and Shiprock, New Mexico 2006 Status Report June 2008 Data Validation Package for 2007 Groundwater Sampling at the Monument Valley, AZ Processing Site

400

SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK  

Office of Legacy Management (LM)

SURVEY OF ROLLING MILL USED BY SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK Work performed by the Health and Safety Research Division Gak Ridge fiational Laboratory Oak Ridge, Tennessee 37830 September 1980 OAK RIDGE NATIONAL LABORATORY operated by UNION CARBIDE CORPORATION for the DEPARTMENT OF ENERGY as part of the Formerly Utilized Sites!- Remedial Action Program SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK A radiological survey was conducted at the Bethelem Steel Corporation Plant in Lackawanna, New York, on September 23, 1980, by representatives of Oak Ridge National Laboratory (ORNL). The subject of the radiological survey was a portion of the original 25.4-cm (lo-inch) bar mill used in converting uranium billets into 3.8-cm rods. All radiation survey

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Trapping and excitation of modes in the magnetotail Katharine J. Mills and Andrew N. Wrighta)  

E-Print Network (OSTI)

Trapping and excitation of modes in the magnetotail Katharine J. Mills and Andrew N. Wrighta wind speed, Dungey obtained a value of about 1000 RE for the length of the magnetotail. Magnetometer

Wright, Andrew N.

402

Multi-Instanton Measure from Recursion Relations in N = 2 Supersymmetric Yang-Mills Theory  

Science Journals Connector (OSTI)

By using the recursion relations found in the framework of N = 2 Super Yang-Mills theory with gauge group SU(2), we reconstruct the structure of the instanton moduli space and its volume form for all winding numbers.

Marco Matone

2001-01-01T23:59:59.000Z

403

Kelvin-Helmholtz driven modes of the magnetosphere Katharine J. Mills and Andrew N. Wright  

E-Print Network (OSTI)

Kelvin-Helmholtz driven modes of the magnetosphere Katharine J. Mills and Andrew N. Wright to the speed of the upstream solar wind,1 with a significant increase in amplitude for solar wind speeds above

Wright, Andrew N.

404

Case Study of Optimal Byproduct Gas Distribution in Integrated Steel Mill Using Multi-Period Optimization  

E-Print Network (OSTI)

? ? ? Case Study of Optimal Byproduct Gas Distribution in Integrated Steel Mill Using Multi-Period Optimization KIMMO M?KINEN BUSINESS MANAGER TONI KYM?L?INEN PRODUCT MANAGER JAAKKO JUNTTILA SALES MANAGER ABB OY HELSINKI FINLAND...

Makinen, K.; Kymalainen, T.; Junttila, J.

2012-01-01T23:59:59.000Z

405

E-Print Network 3.0 - amorphous ball-milled powders Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Vols. 2-6 (1999) pp. 375-380. 375 Summary: of Nanoporous Carbon Powders Produced by High Energy Ball Milling and Formation of Carbon Nanotubes During... Procedure Graphite powder...

406

Economic Modeling of Energy Supply from Burning Wood Wastes at British Columbia Pulp and Paper Mills  

Science Journals Connector (OSTI)

This paper analyzes the use of wood wastes to replace the extensive fossil-fuel consumption ... Columbia, and the further use of wood wastes to produce electricity at these mills. The ... would be willing to pay ...

A. J. Cox

1980-01-01T23:59:59.000Z

407

Extraction and Functional Properties of Non-Zein Proteins in Corn Germ from Wet-Milling  

Science Journals Connector (OSTI)

This study was conducted to evaluate the extractability of wet-milled corn germ protein, characterize the recovered protein and ... potential applications. Protein was extracted from both wet germ and finished (d...

Mila P. Hojilla-Evangelista

2012-01-01T23:59:59.000Z

408

Improved Solubility and Emulsification of Wet-Milled Corn Germ Protein Recovered by UltrafiltrationDiafiltration  

Science Journals Connector (OSTI)

This study evaluated UltrafiltrationDiafiltration (UFDF) as a means to improve the extractability of wet-milled corn germ protein and determined its effects on ... functional properties of the recovered protein ...

Mila P. Hojilla-Evangelista

2014-09-01T23:59:59.000Z

409

Demand side management of a run-of-mine ore milling circuit  

Science Journals Connector (OSTI)

Increasing electricity costs coupled with lower prices for some metals such as platinum group metals require a reevaluation of the operation of grinding processes. Demand side management (DSM) has received increasing attention in the field of industrial control as an opportunity to reduce operating costs. DSM through grinding mill power load shifting is presented in this paper using model predictive control and a real-time optimizer. Simulation results indicate that mill power load shifting can potentially achieve cost reductions of $9.90 per kg of unrefined product when applied to a run-of-mine (ROM) ore milling circuit processing platinum bearing ore. DSM is however still not economically feasible when there is a demand to continuously run the milling circuit at maximum throughput.

B. Matthews; I.K. Craig

2013-01-01T23:59:59.000Z

410

Optimization of cutting parameters in end milling using tool life as an objective function  

E-Print Network (OSTI)

milling has been chosen because of its many versatile applications in the industry. The optimization model has the flexibility to accept any combination of tool and workpiece material, in order to perform the optimization. The background...

Das, Arindam

2001-01-01T23:59:59.000Z

411

High-Capacity High-Energy Ball Mill for Nanophase Materials  

Science Journals Connector (OSTI)

A high-energy high-capacity ball mill, which can be easily ... scaled-up, for the synthesis of nanophase materials is described. The synthesis of nanophase iron...

Diego Basset; Paolo Matteazzi; Fabio Miani

1994-01-01T23:59:59.000Z

412

Improvement in commercial scale dry mill corn ethanol production using controlled flow cavitation and cellulose hydrolysis  

Science Journals Connector (OSTI)

During commercial-scale dry-mill ethanol production from corn, as much as 6 ... In this study, two methods to improve ethanol production during commercial-scale corn ethanol production were tested that release an...

David A. Ramirez-Cadavid; Oleg Kozyuk

2014-09-01T23:59:59.000Z

413

Absorption of Narrow-Gap HgCdTe Near the Band Edge Including Nonparabolicity and the Urbach Tail  

E-Print Network (OSTI)

Absorption of Narrow-Gap HgCdTe Near the Band Edge Including Nonparabolicity and the Urbach Tail, USA. 6.--e-mail: yonchang@uic.edu An analytical model describing the absorption behavior of Hg1-x. This model smoothly fits experimental absorption coefficients over energies ranging from the Urbach tail

Flatte, Michael E.

414

Ball nose milling cutter radius compensation in Z axis for CNC  

Science Journals Connector (OSTI)

A new AutoCAD/VisualLISP based method to substitute the 3D tool radius compensation in Z axis for CNC milling processes is here described. Specific features of VisualLISP programming language combined with AutoCAD facilities are used to gather the data ... Keywords: AutoCAD VisualLISP, CNC milling, Z axis compensation, complex shaped parts, tool radius compensation

Dragoi Mircea Viorel

2009-02-01T23:59:59.000Z

415

Effect of high temperature on fruit set of selected genotypes of Lycopersicon esculentum mill.  

E-Print Network (OSTI)

EFFECT OF HIGH TEMPERATURE ON FRUIT SET OF SELECTED GENOTYPES OF LYCOPERSICON ESCULENTUM MILL. A Thesis by ROBERT KEVAN BARRINGER Submitted to the Graduate College of Texas A&M University in partial fullfillment of the requirements... for the degree of MASTER OF SCIENCE December 1982 Major Subject: Horticulture EFFECT OF HIGH TEMPERATURE ON FRUIT SET OF SELECTED GENOTYPES OF LYCOPERSICON ESCULENTUM MILL. A Thes(s by ROBERT KEVAN BARRINGER Approved as to style and content by: Chalrma...

Barringer, Robert Kevan

1982-01-01T23:59:59.000Z

416

Head/tail Breaks for Visualization of City Structure and Dynamics  

E-Print Network (OSTI)

The things surrounding us vary dramatically, which implies that there are far more small things than large ones, e.g., far more small cities than large ones in the world. This dramatic variation is often referred to as fractal or scaling. To better reveal the fractal or scaling structure, a new classification scheme, namely head/tail breaks, has been developed to recursively derive different classes or hierarchical levels. The head/tail breaks works as such: divide things into a few large ones in the head (those above the average) and many small ones (those below the average) in the tail, and recursively continue the dividing process for the large ones (or the head) until the notion of far more small things than large ones has been violated. This paper attempts to argue that head/tail breaks can be a powerful visualization tool for illustrating structure and dynamics of natural cities. Natural cities refer to naturally or objectively defined human settlements based on a meaningful cutoff averaged from a massi...

Jiang, Bin

2015-01-01T23:59:59.000Z

417

Helping in cooperatively breeding long-tailed tits: a test of Hamilton's rule  

Science Journals Connector (OSTI)

...cooperatively breeding long-tailed tits: a test of Hamilton's rule Ben J. Hatchwell...there have been relatively few empirical tests of Hamilton's rule, and hardly any among...few studies have attempted to directly test a key prediction of inclusive fitness theory...

2014-01-01T23:59:59.000Z

418

Decay of a weak shock followed by a tail of arbitrary waveform  

Science Journals Connector (OSTI)

Weak?shock theory is used to find the decay of a shock that is propagating into a quiet fluid. The tail or flow field behind the shock is assumed to be smooth but otherwise arbitrary. Let the time wave?form of the pressure at the initial measurement point be given by p = P 0 g(t) where P 0 is the initial pressure amplitude and g(t) is the arbitrary tail function normalized so that g(0) = 1. For plane waves the dependence of the shock amplitude P on distance x is found from the following coupled equations: Ax?=?[g(? b )] ?2 ? ? 0 ? b ?g(?)d? and P = P 0 g(? b ) where A is a constant and ? b is the time?like parameter (for the shock) from the Earnshaw solution. For example if G = exp(?at) (an exponential tail) the coupled equations yield P?=?(P 0 /Ax)[(2Ax?+?1) ?1/2 ?+?1] in agreement with P. H. Rogers' result [J. Acoust. Soc. Am. 62 14121419 (1977)]. Solutions have also been obtained for the model tail functions described by J. W. Reed [J. Acoust. Soc. Am. 61 3949 (1977)]. For spherical waves replace x by r 0 ln(r/r 0) where r is radial distance and r 0 is the initial measurement distance. [Work supported by ONR and AFOSR.

David T. Blackstock

1978-01-01T23:59:59.000Z

419

Attitude Stabilization in Hover Flight of a Mini Tail-Sitter UAV with Variable Pitch Propeller  

E-Print Network (OSTI)

Attitude Stabilization in Hover Flight of a Mini Tail-Sitter UAV with Variable Pitch Propeller K-sitters VTOL-UAVs have operational flexibility of typical helicopters while having the cruise performance and development of Unmanned Aerial Vehicles (UAVs) has matured over recent years due to the fact that they can

Paris-Sud XI, Université de

420

Electronic copy available at: http://ssrn.com/abstract=1676368 Long Tails Versus Superstars  

E-Print Network (OSTI)

are not simply the result of increases in the capacity of digital communications, computing and storage, but also a "Long Tail" in the distribution of product sales.1 At the same time, many markets can be increasingly described as "Superstar" or "winner-take-all" markets where blockbuster products dominate sales.2

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

A tail strength measure for assessing the overall significance in a dataset  

E-Print Network (OSTI)

A tail strength measure for assessing the overall significance in a dataset Jonathan Taylor Robert, and illustrate its use on a number of real datasets. 1 Introduction Dave et al. (2004) published a study we would expect to see by chance. Perhaps this is why the Golub dataset has become the most common

Tibshirani, Robeert

422

A tail strength measure for assessing the overall significance in a dataset  

E-Print Network (OSTI)

A tail strength measure for assessing the overall significance in a dataset Jonathan Taylor, and illustrate its use on a number of real datasets. 1 Introduction Dave et al. (2004) published a study than we would expect to see by chance. Perhaps this is why the Golub dataset has become the most common

Tibshirani, Robeert

423

J. Astrophys. Astr. (0000) 00, 000000 ATLAS, and Wide-Angle Tail Galaxies in ATLAS  

E-Print Network (OSTI)

J. Astrophys. Astr. (0000) 00, 000­000 ATLAS, and Wide-Angle Tail Galaxies in ATLAS Minnie Y. Mao1 Telescope Compact Array (ATCA), ATLAS (Australia Telescope Large Area Survey) is imaging two fields large extent of 12 Mpc, with a velocity range of 4500 km s-1. Here we present the WATs in ATLAS

Norris, Ray

424

Insecticides and bridge-roosting colonies of Mexican free-tailed bats (Tadarida brasiliensis) in Texas  

E-Print Network (OSTI)

that agricultural insects constitute one-third to one-half of the free-tail's total diet (DesMarais et al. , 1980; Mizutani, 1992), with moths and other lepidopterans constituting the majority of the morning diet (Whitaker et aL, 1996). Recently, foraging of free...

Sandel, Jody Kay

1999-01-01T23:59:59.000Z

425

Autopilot for a Nonlinear Non-Minimum Phase Tail-Controlled Missile  

E-Print Network (OSTI)

Autopilot for a Nonlinear Non-Minimum Phase Tail-Controlled Missile Anshu Narang controlled missiles: 1. Exploiting the full physical capabilities of the missile system Fulfilling demanding aerodynamics is expensive and inaccurate Only certain states can be measured #12;3 Acceleration Control

Valasek, John

426

Extremal shot noises, heavy tails and max-stable random fields.  

E-Print Network (OSTI)

Extremal shot noises, heavy tails and max-stable random fields. Cl´ement Dombry May 31, 2010 Abstract We consider the extremal shot noise defined by M(y) = sup{mh(y - x); (x, m) }, where. Extremal shot noises naturally appear in extreme value theory as a model for spatial extremes and serve

Paris-Sud XI, Université de

427

CONDITIONAL EXTREMES FROM HEAVY-TAILED DISTRIBUTIONS: AN APPLICATION TO THE ESTIMATION  

E-Print Network (OSTI)

CONDITIONAL EXTREMES FROM HEAVY-TAILED DISTRIBUTIONS: AN APPLICATION TO THE ESTIMATION OF EXTREME author, Stephane.Girard@inrialpes.fr Abstract - This paper is dedicated to the estimation of extreme on a simulation study. An application to the estimation of pointwise return levels of extreme rainfalls in the C

Paris-Sud XI, Université de

428

MOVEMENT OF FEMALE WHITE-TAILED DEER: EFFECTS OF CLIMATE AND INTENSIVE ROW-CROP AGRICULTURE  

E-Print Network (OSTI)

1099 MOVEMENT OF FEMALE WHITE-TAILED DEER: EFFECTS OF CLIMATE AND INTENSIVE ROW-CROP AGRICULTURE in intensively (>80%) cultivated areas. From January 2001 to August 2002, we monitored movements of 77 (61 adult of seasonal migration, whereas crop emergence and harvest had minimal effects. Four deer (8%) dispersed a mean

429

Treatment of pulp mill sludges by supercritical water oxidation  

SciTech Connect

Supercritical water oxidation (SCWO) is new process that can oxidize organics very effectively at moderate temperatures (400 to 650{degree}C) and high pressure (3700 psi). It is an environmentally acceptable alternative for sludge treatment. In bench scale tests, total organic carbon (TOC) and total organic halide (TOX) reductions of 99 to 99.9% were obtained; dioxin reductions were 95 to 99.9%. A conceptual design for commercial systems has been completed and preliminary economics have been estimated. Comparisons confirm that SCWO is less costly than dewatering plus incineration for treating pulp mill sludges. SCWO can also compete effectively with dewatering plus landfilling where tipping fees exceed $35/yd{sup 3}. In some regions of the US, tipping fees are now $75/yd{sup 3} and rising steadily. In the 1995 to 2000 time frame, SCWO has a good chance of becoming the method of choice. MODEC's objective is to bring the technology to commercial availability by 1993. 10 refs., 6 figs., 19 tabs.

Modell, M.

1990-07-01T23:59:59.000Z

430

Engineering process and cost model for a conventional corn wet milling facility  

Science Journals Connector (OSTI)

Conventional wet milling of corn is a process designed for the recovery and purification of starch and several coproducts (germ, gluten, fiber and steep liquor). The total starch produced by the wet milling industry in the USA in 2004 equaled 21.5billionkg, including modified starches and starches used for sweeteners and ethanol production. Process engineering and cost models for a corn wet milling process (for steeping and milling facilities) have been developed for a generic processing plant with a capacity of 2.54millionkg of corn per day (100,000bu/day). The process includes grain cleaning, steeping, germ separation and recovery, fiber separation and recovery, gluten separation and recovery and starch separation. Information for the development of the models was obtained from a variety of technical sources including commercial wet milling companies, industry experts and equipment suppliers. The models were developed using process and cost simulation software (SuperPro Designer) and include processing information such as composition and flow rates of the various process streams, descriptions of the various unit operations and detailed breakdowns of the operating and capital cost of the facility. Based on the information from the model, we can estimate the cost of production per kilogram of starch using the input prices for corn and other wet milling coproducts. We have also used the model to conduct a variety of sensitivity studies utilizing modifications such as feedstock costs, corn compositional variations, and the sale of wet corn gluten feed. The model is also being used as a base-case for the development of models to test alternative processing technologies and to help in the scale-up and commercialization of new wet milling technologies. This model is available upon request from the authors for educational, non-commercial and research uses.

Edna C. Ramirez; David B. Johnston; Andrew J. McAloon; Winnie Yee; Vijay Singh

2008-01-01T23:59:59.000Z

431

Selective enrichment of a methanol-utilizing consortium using pulp & paper mill waste streams  

SciTech Connect

Efficient utilization of carbon inputs is critical to the economic viability of the current forest products sector. Input carbon losses occur in various locations within a pulp mill, including losses as volatile organics and wastewater . Opportunities exist to capture this carbon in the form of value-added products such as biodegradable polymers. Waste activated sludge from a pulp mill wastewater facility was enriched for 80 days for a methanol-utilizing consortium with the goal of using this consortium to produce biopolymers from methanol-rich pulp mill waste streams. Five enrichment conditions were utilized: three high-methanol streams from the kraft mill foul condensate system, one methanol-amended stream from the mill wastewater plant, and one methanol-only enrichment. Enrichment reactors were operated aerobically in sequencing batch mode at neutral pH and 25C with a hydraulic residence time and a solids retention time of four days. Non-enriched waste activated sludge did not consume methanol or reduce chemical oxygen demand. With enrichment, however, the chemical oxygen demand reduction over 24 hour feed/decant cycles ranged from 79 to 89 %, and methanol concentrations dropped below method detection limits. Neither the non-enriched waste activated sludge nor any of the enrichment cultures accumulated polyhydroxyalkanoates (PHAs) under conditions of nitrogen sufficiency. Similarly, the non-enriched waste activated sludge did not accumulate PHAs under nitrogen limited conditions. By contrast, enriched cultures accumulated PHAs to nearly 14% on a dry weight basis under nitrogen limited conditions. This indicates that selectively-enriched pulp mill waste activated sludge can serve as an inoculum for PHA production from methanol-rich pulp mill effluents.

Gregory R. Mockos; William A. Smith; Frank J. Loge; David N. Thompson

2007-04-01T23:59:59.000Z

432

Proceedings of The South African Sugar Technologists ' Association- June 1995 IMPROVING OLDER SUGAR MILL BOILERS IL BOSHOFF  

E-Print Network (OSTI)

Improvements which can be made to sugar mill boilers when they are being moved or in situ, are listed. Examples of such improvements are given.

unknown authors

433

Performance Assessment and Recommendations for Rejuvenation of a Permeable Reactive Barrier: Cotter Corporations Caon City, Colorado, Uranium Mill  

Energy.gov (U.S. Department of Energy (DOE))

Performance Assessment and Recommendations for Rejuvenation of a Permeable Reactive Barrier: Cotter Corporations Canon City, Colorado, Uranium Mill (April 2005)

434

Burning mill sludge in a fluidized-bed incinerator and waste-heat-recovery system; Ten years of successful operation  

SciTech Connect

This paper reports on burning mill sludge in a fluidized-bed incinerator and waste-heat-recovery system. In the late 1970s, the Lielahti sulfite mill of G.A. Serlachius Corp. (now Metsa Serla Oy) began investigating alternative methods of sludge disposal. The mill had an annual capacity of 100,000 tons of bleached pulp, generated 80,000 tons of by-product lignin sulfonates, and specialized in dissolving pulps. Because of the end product's high quality requirements, the mill had a low pulp yield and high losses in the form of both dissolved and suspended solids.

Nickull, O. (Metsa Serla, Oy (FI)); Lehtonen, O. (Tampella Ltd., Tampere (FI)); Mullen, J. (Tampella Keeler, Williamsport, PA (US))

1991-03-01T23:59:59.000Z

435

Helium ion beam milling to create a nano-structured domain wall magnetoresistance spin valve  

Science Journals Connector (OSTI)

We have fabricated and measured single domain wall magnetoresistance devices with sub-20nm gap widths using a novel combination of electron beam lithography and helium ion beam milling. The measurement wires and external profile of the spin valve are fabricated by electron beam lithography and lift-off. The critical bridge structure is created using helium ion beam milling, enabling the formation of a thinner gap (and so a narrower domain wall) than that which is possible with electron beam techniques alone. Four-point probe resistance measurements and scanning electron microscopy are used to characterize the milled structures and optimize the He ion dose. Successful operation of the device as a spin valve is demonstrated, with a 0.2% resistance change as the external magnetic field is cycled. The helium ion beam milling efficiency as extracted from electrical resistance measurements is 0.044atoms/ion, about half the theoretical value. The gap in the device is limited to a maximum of 20nm with this technique due to sub-surface swelling caused by injected ions which can induce catastrophic failure in the device. The fine patterning capabilities of the helium ion microscope milling technique indicate that sub-5nm constriction widths could be possible.

Yudong Wang; S A Boden; D M Bagnall; H N Rutt; C H de Groot

2012-01-01T23:59:59.000Z

436

Microstructural refinement and strengthening of Cu-4 Cr-2 Nb alloy by mechanical milling  

SciTech Connect

Lately, a variety of dispersion strengthened (DS) copper alloys that provide a good combination of thermal/electrical conductivity and mechanical strength have been developed. Strengthening is usually achieved by the introduction of a ceramic, refractory metal or intermetallic secondary phase. Cu-Cr-Nb is one such DS alloy in which strengthening is provided by Cr{sub 2}Nb intermetallic particles. Mechanical milling of as-atomized Cu-4 Cr-2 Nb alloy powders substantially increases the mechanical strength (hardness) of the starting material. This is achieved through a drastic grain size, as well as large precipitate size refinement. A more uniform precipitate distribution is also attained. Whether milling is performed with steel or WC vial and balls the hardness saturates at approximately 100 HRB after about 4 hr milling. However, this benefit of MM was offset by an equally severe decrease in electrical conductivity. This decrease is attributed to impurities/contamination from the milling media introduced into the milled powder, primarily, Fe and C, or, WC and Co.

Anderson, K.R.; Groza, J.R. [Univ. of California, Davis, CA (United States). Dept. of Chemical Engineering and Materials Science] [Univ. of California, Davis, CA (United States). Dept. of Chemical Engineering and Materials Science; Ulmer, D.G. [Rockwell International, Canoga Park, CA (United States). Rocketdyne Div.] [Rockwell International, Canoga Park, CA (United States). Rocketdyne Div.

1997-07-15T23:59:59.000Z

437

Microscopic mechanisms of metastable phase formation during ball milling of intermetallic TiAl phases  

SciTech Connect

Powders of the intermetallic equilibrium phases {alpha}{sub 2}-Ti{sub 3}Al, {gamma}-TiAl and TiAl{sub 3} were ball milled in order to investigate the microscopic origins of the energetic destabilization and the transformation into metastable phases during the milling process. It was found that the intermetallic phases were chemically partially disordered on milling followed by the transformation into solid solution phases after long milling. In detail, for the {gamma} phase, the formation of numerous deformation twins, thin h.c.p. lamellae and lamellae of the 9R phase formed by an antitwin operation was observed by TEM. The disordering of the D0{sub 22}-TiAl{sub 3} phase occurred inhomogeneously in the material via the formation of antiphase boundaries on (001) planes, resulting in a f.c.c. solid solution in the final state. In summary, it can be concluded that the formation of the observed metastable phases results from chemical disordering, whereas the excess enthalpy of grain boundaries plays only a minor role for the energetical destabilization of the intermetallic compounds during milling in this case.

Klassen, T.; Oehring, M.; Bormann, R. [GKSS Research Centre, Geesthacht (Germany)] [GKSS Research Centre, Geesthacht (Germany)

1997-09-01T23:59:59.000Z

438

Calculation of the fast ion tail distribution for a spherically symmetric hot spot  

SciTech Connect

The fast ion tail for a spherically symmetric hot spot is computed via the solution of a simplified Fokker-Planck collision operator. Emphasis is placed on describing the energy scaling of the fast ion distribution function in the hot spot as well as the surrounding cold plasma throughout a broad range of collisionalities and temperatures. It is found that while the fast ion tail inside the hot spot is significantly depleted, leading to a reduction of the fusion yield in this region, a surplus of fast ions is observed in the neighboring cold plasma region. The presence of this surplus of fast ions in the neighboring cold region is shown to result in a partial recovery of the fusion yield lost in the hot spot.

McDevitt, C. J.; Tang, X.-Z.; Guo, Z. [Theoretical Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Berk, H. L. [Department of Physics, University of Texas, Austin, Texas 78712 (United States)

2014-10-15T23:59:59.000Z

439

Near-threshold quantization for potentials with inverse-cube tails  

Science Journals Connector (OSTI)

For potential wells with long-range attractive tails proportional to -1/r3, as occur in the resonant dipole-dipole interaction in homonuclear alkali-metal dimers, we present a highly accurate analytical expression for the tail contribution to the quantization function F(E). This quantization function determines the near-threshold bound-state energies via the quantization rule nth-n=F(En). The performance of the quantization function derived in this paper is demonstrated by applying it to a model Lennard-Jones potential and to vibrational bound-state spectra of sodium dimers (Na2). These results are compared with those obtained via the semiclassical LeRoy-Bernstein formula which neglects quantum effects that are important in the near-threshold regime.

Tim-Oliver Mller and Harald Friedrich

2011-02-02T23:59:59.000Z

440

Deep-Sea Research II 49 (2002) 61476156 Diets of short-tailed shearwaters in the southeastern Bering Sea  

E-Print Network (OSTI)

Department, The Claremont Colleges, 925 N. Mills Ave., Claremont, CA 91711, USA 0967-0645/02/$ - see front- tion of tidal and wind mixing. The middle shelf domain (depth between 50 and 100 m) is two- layered

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

"Double swallow-tail" singularity and glass-glass transition in a quasibinary system  

E-Print Network (OSTI)

The system with the square shoulder (SS) potential is considered in the frame of Mode Coupling Theory (MCT) approach. An approximation for the structure factor is used that emphasizes the quasibinary character of the system. The qualitative phase diagram is constructed that includes continuous and discontinuous glass-glass transitions. The phase diagram is governed by two swallow tails connected with two $A_4$ singularities.

V. N. Ryzhov; E. E. Tareyeva

2013-12-05T23:59:59.000Z

442

Allozymic and mitochondrial DNA analysis of sympatric white-tailed and mule deer in West Texas  

E-Print Network (OSTI)

ALLOZYMIC AND MITOCHONDRIAL DNA ANALYSIS OF SYMPATRIC WHITE ZAILED AND MULE DEER IN WEST TEXAS A Thesis by SCOTT WEBSTER BALLINGER Subsd. tted to the Graduate College of Texas ASM University in partial fulfillnent of the requirenents... for the degree of MASTER OF SCIENCE December 1987 Ma)or Sub)act: Wildlife and Fisheries Science ALLOZYMIC AND MITOCHONDRIAL DNA ANALYSIS OF SYMPATRIC WHITE-TAILED AND MULE DEER IN WEST TEXAS A Thesis by SCOTT WEBSTER BALLINGER Approved as to style...

Ballinger, Scott Webster

2012-06-07T23:59:59.000Z

443

The role of the Ord Arid Intrusion in the historical and contemporary genetic division of long-tailed finch  

E-Print Network (OSTI)

-tailed finch subspecies in northern Australia Lee Ann Rollins, Nina Svedin, Sarah R. Pryke & Simon C. Griffith, and a Postdoctoral Fellowship to Nina Svedin from the Research Council FORMAS. Received: 15 January 2012; Revised: 15

444

Habitat use and population fluctuations of white-tailed deer at La Copita Research Area, Jim Wells County, Texas  

E-Print Network (OSTI)

HABITAT USE AND POPULATION FLUCTUATIONS OF WHITE-TAILED DEER AT LA COPITA RESEARCH AREA, JIM WELLS COUNTY, TEXAS A Thesis by PATRICK BRENDAN WALSH Submitted to the Graduate College of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE May 1985 Major Subject: Wildlife and Fisheries Sciences HABITAT USE AND POPULATION FLUCTUATIONS OF WHITE-TAILED DEER AT LA COPITA RESEARCH AREA, JIM WELLS COUNTY, TEXAS A Thesis by PATRICK BRENDAN WALSH...

Walsh, Patrick Brendan

2012-06-07T23:59:59.000Z

445

Effects of grazing pressure by Angora goats on intra/interspecific foraging competition with white-tailed deer  

E-Print Network (OSTI)

EFFECTS OF GRAZING PRESSURE BY ANGORA GOATS ON INTRA/INTERSPECIFIC FORAGING COMPETITION WITH WHITE-TAILED DEER A Thesis by RHONDA LYNNE HERVEY Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE August 1989 Major Subject: Range Science EFFECTS OF GRAZING PRESSURE BY ANGORA GOATS ON INTRA/INTERSPECIFIC FORAGING COMPETITION WITH WHITE-TAILED DEER A Thesis by RHONDA LYNNE HERVEY Approved...

Hervey, Rhonda Lynne

2012-06-07T23:59:59.000Z

446

Movement of white-tailed deer in the Edwards Plateau region of Texas: and responses to point attractants  

E-Print Network (OSTI)

MOVEMENT OF WHITE-TAILED DEER IN THE EDWARDS PLATEAU REGION OF TEXAS AND RESPONSES TO POINT ATTRACTANTS A Thesis by DANIEL SCOTl' LICHT Submitted to the Graduate College of Texas ARM University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE May 1987 Major Subject: Wildlife and Fisheries Sciences MOVEMENT OF WHITE-TAILED DEER IN THE EDWARDS PLATEAU REGION OF TEXAS AND RESPONSES TO POINT ATTIQCTANTS A Thesis by DANIEL SCOTT LIGHT Approved as to style...

Licht, Daniel S.

2012-06-07T23:59:59.000Z

447

A clinical, histopathological, and immuno-fluorescent study of Babesia spp. infection in white-tailed deer  

E-Print Network (OSTI)

A CLINICAL, HISTOPATHOLOGICAL, AND IMMUNOFLUORESCENT STUD Y OF BABESIA SPP. INFECTION IN WHITE- TAILED DEER A Thesis by HAROLD RAY EMERSON Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE January 1969 Major Subject: Veterinary Pathology A CLINICAL, HISTOPATHOLOGICAL, AND IMMUNOFLUORESCENT STUDY OF BABESIA SPP. INFECTION IN WHITE- TAILED DEER A Thesis by HAROLD RAY EMERSON Approved as to style...

Emerson, Harold Ray

2012-06-07T23:59:59.000Z

448

Effects of short duration grazing on white-tailed deer in the Edwards PLateau and Rio Grande Plain of Texas  

E-Print Network (OSTI)

EFFECTS OF SHORT DURATION GRAZING ON WHITE-TAILED DEER IN THE EDWARDS PLATEAU AND RIO GRANDE PLAIN OF TEXAS A Thesis by CALVIN LEMUIEL RICHARDSON Submitted to the Graduate College of Texas ARM L'niversity in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE December 1986 Major Subject: Wildlife and Fisheries Sciences EFFECTS OF SHORT DURATION GRAZING ON WHITE-TAILED DEER IN THE EDWARDS PLATEAU AND RIO GRANDE PLAIN OF TEXAS A Thesis by CALVIN LEMUIEL...

Richardson, Calvin Lemuiel

2012-06-07T23:59:59.000Z

449

The quality of white-tailed deer meat (Odocoileus virginianus) as influenced by slaughtering and handling practices  

E-Print Network (OSTI)

THE QUALITY OF WHITE-TAILED DEER MEAT (ODOCOILEUS VIRGINIANUS) AS INFLUENCED BY SLAUGHTERING AND HANDLING PRACTICES A Thesis by JOYCE ALINE HOSCH Submitted to the Graduate College of Texas A&M University in partial fulfillme nt o...( the requirement for the degree of MASTER OF SCIENCE May 1976 Major Subject: Food Technology THE QUALITY OF WHITE-TAILED DEER MEAT (ODOCOILEUS VIRGINIANUS) AS INFLUENCED BY SLAUGHTERING AND HANDLING PRACTICES A Thesis by JOYCE ALINE BOSCH Approved...

Hosch, Joyce Aline

2012-06-07T23:59:59.000Z

450

311221," Wet Corn Milling",0,0,"X",0  

U.S. Energy Information Administration (EIA) Indexed Site

3 Relative Standard Errors for Table 11.3;" 3 Relative Standard Errors for Table 11.3;" " Unit: Percents." " "," ",,,"Renewable Energy" " "," ",,,"(excluding Wood" "NAICS"," ","Total Onsite",,"and" "Code(a)","Subsector and Industry","Generation","Cogeneration(b)","Other Biomass)(c)","Other(d)" ,,"Total United States" 311,"Food",2.8,1.1,86.8,37.8 3112," Grain and Oilseed Milling",0.7,0.7,"X",0 311221," Wet Corn Milling",0,0,"X",0 31131," Sugar Manufacturing",0,0,"X",0 3114," Fruit and Vegetable Preserving and Specialty Foods ",1.2,1.2,"X",44.1

451

Pulp and Paper Mills: Profiting for Efficient Motor System Use | ENERGY  

NLE Websites -- All DOE Office Websites (Extended Search)

Pulp and Paper Mills: Profiting for Efficient Motor System Use Pulp and Paper Mills: Profiting for Efficient Motor System Use Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

452

Microsoft Word - PS-MST-MILLING-2012-05-22.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

71.doc 1 (03/2012) 71.doc 1 (03/2012) BROOKHAVEN NATIONAL LABORATORY MACHINE SHOP SAFE WORK PRACTICES EVALUATION FORM Dept./Div.: PS______ Machine: PhoSci MSJPM Milling Machine (PS-MST-MILLING) Machine Shop Supervisor's Name(s): Employee Name: _________________________________ Life Number: Competencies Date Completed Evaluated By (Initials) Comments 1. State BNL policy for use of eye protection in machine shops. 2. Identify main disconnect for tool and explain the requirement for access to it. 3. Identify all controls and describe their functions. 4. Identify all machine guards and describe their functions. 5. Explain the process when defects are found. 6. Demonstrate safe work practices while performing

453

The effects of cottonseed oil mill design on fire insurance costs  

E-Print Network (OSTI)

not standard Jll grinding or disc huller: Pisc huller in mill building Right angle drives and spur gears Total Add 5JT4 of Hay Rate of city or town Total Deduct for chemical engine on wheels: 5'K of above rate Total Deduct for sprinklers...). The provisions of the TGBS state that 50$ of the key rate is to be added in determining a gross rate for a cottonseed oil mill if the property is within the city limits of an incorporated municipality with a recognized water works, and if the property...

Clark, Stanley Preston

2012-06-07T23:59:59.000Z

454

Direct-write milling of diamond by a focused oxygen ion beam  

E-Print Network (OSTI)

Recent advances in focused ion beam technology have enabled high-resolution, direct-write nanofabrication using light ions. Studies with light ions to date have, however, focused on milling of materials where sub-surface ion beam damage does not inhibit device performance. Here we report on direct-write milling of single crystal diamond using a focused beam of oxygen ions. Material quality is assessed by Raman and luminescence analysis, and reveals that the damage layer generated by oxygen ions can be removed by nonintrusive post-processing methods such as localised electron beam induced chemical etching.

Martin, Aiden A; Botman, Aurelien; Toth, Milos; Aharonovich, Igor

2015-01-01T23:59:59.000Z

455

Sociologically imagined: the decentering of C. Wright Mills, the postmodern cowboy  

E-Print Network (OSTI)

the image as symbol as opposed to language, perhaps the most enduring and aptly appropriate image of Mills is that of him in leather jacket and gloves, donning riding boots and riding-goggles, helmetless on his BMW motorcycle with the wind blowing through... the image as symbol as opposed to language, perhaps the most enduring and aptly appropriate image of Mills is that of him in leather jacket and gloves, donning riding boots and riding-goggles, helmetless on his BMW motorcycle with the wind blowing through...

Kerr, Keith Thomas

2009-05-15T23:59:59.000Z

456

Extended Kalman Filter Based Neural Networks Controller For Hot Strip Rolling mill  

SciTech Connect

The present paper deals with the application of an Extended Kalman filter based adaptive Neural-Network control scheme to improve the performance of a hot strip rolling mill. The suggested Neural Network model was implemented using Bayesian Evidence based training algorithm. The control input was estimated iteratively by an on-line extended Kalman filter updating scheme basing on the inversion of the learned neural networks model. The performance of the controller is evaluated using an accurate model estimated from real rolling mill input/output data, and the usefulness of the suggested method is proved.

Moussaoui, A. K. [Electrical Engineering Laboratory of Guelma (LGEG), BP.401, University of Guelma, 24000 (Algeria); Abbassi, H. A.; Bouazza, S. [Universite Badji Mokhtar BP 12--23000-Annaba Algerie (Algeria)

2008-06-12T23:59:59.000Z

457

Bayesian models for elevated disease risk due to exposure to uranium mine and mill waste on the Navajo Nation  

E-Print Network (OSTI)

ForReview Only Bayesian models for elevated disease risk due to exposure to uranium mine and mill of Pharmacy, Community Environmental Health Program Keywords: abandoned uranium mines, conditionally specified to ex- posure to uranium mine and mill waste on the Navajo Nation Glenn A. Stark University of New

Huerta, Gabriel

458

The BF Formalism for Yang-Mills Theory and the `t Hooft Algebra  

E-Print Network (OSTI)

The deformation of a topological field theory, namely the pure BF theory, gives the first order formulation of Yang-Mills theory; Feynman rules are given and the standard uv-behaviour is recovered. In this formulation new non local observables can be introduced following the topological theory and giving an explicit realization of `t Hooft algebra.

Maurizio Martellini; Mauro Zeni

1996-10-13T23:59:59.000Z

459

Recycling of water in bleached kraft pulp mills by using electrodialysis.  

SciTech Connect

Conservation of water in bleached kraft pulp mills by recycling the bleach plant effluent directly without treatment will cause accumulation of inorganic ''non-process elements'' (NPEs) and serious operational problems. In this work, an electrodialysis process is being developed for recycling the acidic bleach plant effluent of bleached kraft pulp mills. In this process, electrodialysis functions as a selective kidney to remove inorganic NPEs from bleach plant effluents, before they reach the recovery cycle. Acidic bleach plant effluents from several mills using bleaching sequences based on chlorine dioxide were characterized. The total dissolved solids were mostly inorganic NPEs. Sodium was the predominant cation and chloride was present at significant levels in all these effluents. In laboratory electrodialysis experiments, selective removal of chloride and potentially harmful cations, such as potassium, calcium, and magnesium, were removed efficiently. Rejection of organic compounds was up to 98%. Electrodialysis was shown to be resistant to membrane fouling and scaling, in a 100-hour laboratory experiment. Based on a model mill with 1,000 ton/day pulp production, the economic analysis suggests that the energy cost of electrodialysis is less than $200/day, and the capital cost of the stack is about $500,000.

Fracaro, A. T.; Henry, M. P.; Pfromm, P.; Tsai, S.-P.

1999-01-15T23:59:59.000Z

460

BismuthCeramic Nanocomposites with Unusual Thermal Stability via High-Energy Ball Milling**  

E-Print Network (OSTI)

Bismuth±Ceramic Nanocomposites with Unusual Thermal Stability via High-Energy Ball Milling, nanostructured bismuth±ceramic nanocomposites with unusual thermal stabil- ity. These materials contain a high. Important for electrical and thermoelectric applications, the ceramic phase is electrically and thermally

Braun, Paul

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Internet Time Synchronization: the Network Time Protocol 1,2,3 David L. Mills  

E-Print Network (OSTI)

the Internet backbone networks and gateways are carefully engineered for good service, op­ erating speedsInternet Time Synchronization: the Network Time Protocol 1,2,3 David L. Mills Electrical), which is designed to distribute time information in a large, diverse internet system operating at speeds

Mills, David L.

462

Internet Time Synchronization: the Network Time Protocol1,2,3 David L. Mills  

E-Print Network (OSTI)

Internet Time Synchronization: the Network Time Protocol1,2,3 David L. Mills Electrical Engineering is designed to distribute time information in a large, diverse internet system operating at speeds from and resulted in the designation of NTP as an Internet Standard protocol. The NTP synchronization system, which

Mills, David L.

463

Timber Products' Mississippi mill earns formaldehyde certification Tuesday, February 10, 2009 -Modern Woodworking  

E-Print Network (OSTI)

., have been certified to meet the California Air Resources Board (CARB) requirements. Timber Products of the California Air Resources Board (CARB). Corinth's designation means that all Timber Products hardwood plywoodTimber Products' Mississippi mill earns formaldehyde certification Tuesday, February 10, 2009

464

Shifting Identities in South Kansas City: Hickman Mills's Transformation from a Suburban to Urban School District  

E-Print Network (OSTI)

and students. The study's five chapters present an analysis of fifty years (1950-2000) of the history of Hickman Mills, a small community on the south side of Kansas City, Missouri. The history of the school district and the neighborhoods it served reveals...

Rife, Aaron Tyler

2014-08-31T23:59:59.000Z

465

The milling process monitoring using 3D envelope method BISU Claudiu1,a  

E-Print Network (OSTI)

over the past decades that measure vibration (acceleration) [3], dynamic force [4], acoustic emission monitored, vibration measurement has been widely adopted as a popular tool. Effective utilization proposes a method to vibration analysis in order to on-line monitoring of milling process quality. Adapting

Paris-Sud XI, Université de

466

SEP Success Story: Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste  

Energy.gov (U.S. Department of Energy (DOE))

A dedicated group of small business owners are using a $771,000 Recovery Act grant from the Energy Departments State Energy Program and $4 million from the U.S. Forest Service to purchase the shuttered Springdale Lumber timber mill and install a combined heat and power (CHP) system. Learn more.

467

LLaannggeerrhhaannss LLaabb PPrroottooccoollss Handling of Dead Fish at Yates Mill Facility  

E-Print Network (OSTI)

LLaannggeerrhhaannss LLaabb PPrroottooccoollss Handling of Dead Fish at Yates Mill Facility If a study fish is found dead, preserve it and return it to the lab for DRILL recording. If you are going to DCL shortly after finding the fish: 1. Put it in a plastic bag and bring it to DCL. 2. Put

Langerhans, Brian

468

A Robust MPC Design for Hot Rolling Mills: A Polyhedral Invariant Sets Approach  

E-Print Network (OSTI)

rolling stands. The rolled strip is cooled down by spraying water in a run­out table and coiled by a down stand i+1th stand main motor ASR ASR/ACR looper-tension control system tension looper roll M strip looper motor looper main motor ASR M Fig. 2. Tension and looper control in finishing mills: ASR

469

Radon releases from Australian uranium mining and milling projects: assessing the UNSCEAR approach  

Science Journals Connector (OSTI)

The release of radon gas and progeny from the mining and milling of uranium-bearing ores has long been recognised as a potential radiological health hazard. The standards for exposure to radon and progeny have decreased over time as the understanding of their health risk has improved. In recent years there has been debate on the long-term releases (10,000 years) of radon from uranium mining and milling sites, focusing on abandoned, operational and rehabilitated sites. The primary purpose has been estimates of the radiation exposure of both local and global populations. Although there has been an increasing number of radon release studies over recent years in the USA, Australia, Canada and elsewhere, a systematic evaluation of this work has yet to be published in the international literature. This paper presents a detailed compilation and analysis of Australian studies. In order to quantify radon sources, a review of data on uranium mining and milling wastes in Australia, as they influence radon releases, is presented. An extensive compilation of the available radon release data is then assembled for the various projects, including a comparison to predictions of radon behaviour where available. An analysis of cumulative radon releases is then developed and compared to the UNSCEAR approach. The implications for the various assessments of long-term releases of radon are discussed, including aspects such as the need for ongoing monitoring of rehabilitation at uranium mining and milling sites and life-cycle accounting.

Gavin M. Mudd

2008-01-01T23:59:59.000Z

470

Perturbative Ward identities for Yang-Mills field theory stochastically quantized  

Science Journals Connector (OSTI)

We compute the divergent part of the three-point vertex function of the non-Abelian Yang-Mills gauge field theory within the stochastic quantization approach to the one-loop order. This calculation allows us to find four renormalization constants which, together with the four previously obtained, verify, to the calculated order, some Ward identities.

A. Muoz Sudupe

1986-04-15T23:59:59.000Z

471

Properties of Fine Superconducting YBCO Particles Prepared by Dry- and Wet-Type Jet-Mill  

Science Journals Connector (OSTI)

Small YBCO particles which has an average size of 12 m were prepered from high quality YBCO pellets by dry-type jet-mill system. The resulting small YBCO...3COCH2CH3) or toluene(C6H5CH3).As a result, the fine Y...

Hiroshi Kezuka

1996-01-01T23:59:59.000Z

472

Description of $?$-cluster tail in $^{8}$Be and $^{20}$Ne: Delocalization of $?$ cluster because of quantum penetration  

E-Print Network (OSTI)

We analyze the $\\alpha$-cluster wave functions in cluster states of $^8$Be and $^{20}$Ne by comparing the exact relative wave function obtained by the generator coordinate method (GCM) with various types of trial functions. For the trial functions, we adopt the fixed range shifted Gaussian of the Brink-Bloch (BB) wave function, the spherical Gaussian with the adjustable range parameter of the spherical Thosaki-Horiuchi-Schuck-R\\"opke (sTHSR), the deformed Gaussian of the deformed THSR (dTHSR), and a function with the Yukawa tail (YT). The quality of the description of the exact wave function with a trial function is judged by the squared overlap between the trial function and the GCM wave function. The better result is obtained with the sTHSR wave function than the BB wave function, and further improvement can be done with the dTHSR wave function because these wave functions can describe the outer tail better. The YT wave function gives almost the equal quality to or even better quality than the dTHSR wave function indicating that the outer tail of $\\alpha$ cluster states is characterized by the Yukawa-like tail rather than the Gaussian tail. In the weakly bound $\\alpha$ cluster states with the small $\\alpha$ separation energy and the low centrifugal and Coulomb barriers, the outer tail part is the slowly damping function described well by the quantum penetration through the effective barrier. This outer tail characterizes the almost zero-energy free $\\alpha$ gas behavior, i.e., the delocalization of cluster.

Yoshiko Kanada-En'yo

2014-07-11T23:59:59.000Z

473

Energy Efficiency Feasibility Study and Resulting Plan for the Bay Mills Indian Community  

SciTech Connect

In 2011 the Inter-Tribal Council of Michigan, Inc. was awarded an Energy Efficiency Development and Deployment in Indian Country grant from the U.S. Department of Energys Tribal Energy Program. This grant aimed to study select Bay Mills Indian Community community/government buildings to determine what is required to reduce each buildings energy consumption by 30%. The Bay Mills Indian Community (BMIC) buildings with the largest expected energy use were selected for this study and included the Bay Mills Ellen Marshall Health Center building, Bay Mills Indian Community Administration Building, Bay Mills Community College main campus, Bay Mills Charter School and the Waishkey Community Center buildings. These five sites are the largest energy consuming Community buildings and comprised the study area of this project titled Energy Efficiency Feasibility Study and Resulting Plan for the Bay Mills Indian Community. The end objective of this study, plan and the Tribe is to reduce the energy consumption at the Communitys most energy intensive buildings that will, in turn, reduce emissions at the source of energy production, reduce energy expenditures, create long lasting energy conscious practices and positively affect the quality of the natural environment. This projects feasibility study and resulting plan is intended to act as a guide to the Communitys first step towards planned energy management within its buildings/facilities. It aims to reduce energy consumption by 30% or greater within the subject facilities with an emphasis on energy conservation and efficiency. The energy audits and related power consumption analyses conducted for this study revealed numerous significant energy conservation and efficiency opportunities for all of the subject sites/buildings. In addition, many of the energy conservation measures require no cost and serve to help balance other measures requiring capital investment. Reoccurring deficiencies relating to heating, cooling, thermostat setting inefficiencies, powering computers, lighting, items linked to weatherization and numerous other items were encountered that can be mitigated with the energy conservation measures developed and specified during the course of this project.

Kushman, Chris

2014-02-03T23:59:59.000Z

474

CDAW 8 observations of plasmoid signatures in the geomagnetic tail: An assessment  

SciTech Connect

A primary objective of the Coordinated Data Analysis Workshop 8 (CDAW 8) was the critical assessment of the plasmoid hypothesis. In this study, various types of magnetic phenomena, including closed loops and flux ropes, were considered as candidates for producing the north-then-south magnetic field perturbations characteristic of the plasmoids observed in the magnetotail by ISEE 3 during the CDAW 8 A and G events. For these two events the principal axis analyses of the magnetic field data and supporting energetic particle and measurements are found to be consistent with the closed-loop model of plasmoids for which the plane of rotation for {bold B} lies near the GSE {ital X}--{ital Z} plane and only small field components lie in the minimum variance direction oriented largely along the {ital Y} direction. While small pitch angle spiraling of the field lines within these structures such as suggested by Hughes and Sibeck (1987) and Birn {ital et} {ital al}. (1989) cannot be definitively measured using single-spacecraft magnetometer observations, the ISEE 3 measurements are not consistent with moderate strength or Venus-type strong core field flux ropes. The event A and G plasmoids were preceded by smoothly draped lobe field lines and followed by strong southward fields in the postplasmoid plasma sheet as predicted by the reconnection model of substorms. This latter feature of the observations is consistent with plasmoids moving down the tail, at least in part, due to the Maxwell stress exerted by lobe field lines which were disconnected at the near-tail neutral line and have draped about the earthward side of the plasmoid. Calculations, based upon typical plasmoid and tail parameters, are presented which indicate that the {ital J}{times}{ital B} force associated with these disconnected lobe field lines may be sufficient to accelerate plasmoids up to the speeds observed by ISEE 3.

Slavin, J.A.; Baker, D.N.; Fairfield, D.H. (NASA Goddard Space Flight Center, Greenbelt, Maryland (USA)); Craven, J.D.; Frank, L.A. (Department of Physics and Astronomy, University of Iowa, Iowa City, Iowa (USA)); Elphic, R.C. (Institute of Geophysics and Planetary Physics, University of California, Los Angeles, California (USA)); Galvin, A.B.; Richardson, I.G. (Department of Physics and Astronomy, University of Maryland, College Park, Maryland (USA)); Hughes, W.J. (Department of Astronomy, Boston University, Boston, Massachusetts (USA)); Manka, R.H. (National Research Council, Washington, D.C. (USA)); Mitchell, D.G.; Sibeck, D.J. (Applied Physics Laboratory, Johns Hopkins University, Laurel, Maryland (USA)); Sanderson, T.R. (European Space Research and Technology Centre, Noordwijk, (Netherlands)); Smith, E.J. (Jet Propulsion Laboratory, California Institute of Technology, Pasadena, California (USA)); Zwickl, R.D. (NOAA Space Environment Laboratory, Boulder, Colorado (USA))

1989-11-01T23:59:59.000Z

475

A CMOS Tailed Tent Map for the Generation of Uniformly Distributed Chaotic Sequences  

E-Print Network (OSTI)

This paper describes the design of a modified tent map characterized by a uniform probability density function. The use of this map is proposed as an alternative to the tent map and the Bernoulli shift. It is shown that practical circuits implementing the latter two maps may possess parasitic stable equilibria, fact which would prevent the desired chaotic behavior of the system. On the other hand, commonly used strategies to avoid the parasitic equilibria onset also affect the uniformity of the probability density function. Conversely, the use of the proposed tailed tent map allows to assure a certain degree of parameter deviation robustness, without compromising on the statistical properties of the system.

Sergio Callegari; Gianluca Setti; Peter J. Langlois

2014-09-26T23:59:59.000Z

476

Inelastic neutron scattering investigation of ball-milled FeSiB described as a magnetic nanoglass-like structure  

Science Journals Connector (OSTI)

Abstract An inelastic neutron scattering study has been carried out to assess the effects of mechanical milling treatments (10, 20 and 70h) on an amorphous melt-spun FeSiB ribbon. Faint traces of crystallization were observed after 10 and 20h milling by X-ray diffraction and Mssbauer spectroscopy and a minor fraction of bcc-Fe was clearly detected after 70h. Whilst the neutron spectrum S(E) of the 10h-milled sample, at temperature T=300K, does not differ from that of the precursor FeSiB ribbon, the area of the inelastic region of S(E) decreases more and more after 20 and 70h milling. Moreover, in the samples milled for 20 and 70h, also the area of the elastic region of the S(E) spectrum is definitely smaller than the one of the FeSiB ribbon. This is consistent with a reduction of the magnetic cross section upon milling and it agrees also with magnetization measurements. We interpret this behavior assuming that the milling treatment causes local alterations of the short-range atomic order within the amorphous phase, and hence of the precursor collinear ferromagnetic order, finally giving rise to a sort of magnetic nanoglass structure.

L. Del Bianco; F. Spizzo; A. Deriu; A. Orecchini

2014-01-01T23:59:59.000Z

477

MATURE FINE TAILINGS (MFTs): A STUDY OF COMPRESSIVE STRENGTH AND RHEOLOGICAL PROPERTIES OF ATHABASCA OIL SANDS PETROLEUM MINING WASTE APPLIED IN CONCRETE MIXTURES.  

E-Print Network (OSTI)

?? This study investigates the compressive properties of concrete incorporating Mature Fine Tailings (MFTs) waste stream from a tar sands mining operation. The objectives of (more)

Leav, Jean S.

2013-01-01T23:59:59.000Z

478

Daily movements of female white-tailed deer relative to parturition and breeding.  

SciTech Connect

Abstract: To assess how white-tailed deer (Odocoileus virginianus) herd demographics influence reproductive behaviors, we examined 24-h diel movements of female whitetailed deer relative to parturition and breeding in a low-density population with a near even sex ratio at the Savannah River Site (SRS), South Carolina. We conducted a series of intensive, 24-h radio-tracking periods of 13 females during spring and fall 2002. We compared daily range (ha), rate of travel (m/h), and distance between extreme daily locations (m), among the periods of pre-parturition and post-parturition and pre-, peak-, and post-rut. From pre-parturition to post-parturition, we observed decreases in diel range size (?¢????38.2%), distance between extreme diel locations (?¢????17.0%), and diel rate of travel (?¢????18.2%). Diel range size, distance between extreme diel locations, and diel rate of travel during the pre-rut and rut exceeded those observed during post-rut. We further identified substantial increases in mobility during 12 24-h diel periods for eight females during our fall monitoring. Our data suggest that female white-tailed deer reduce mobility post-fawning following exaggerated movements during pre-parturition. Furthermore, despite a near equal sex ratio, estrous does may be required to actively seek potential mates due to low population density.

Gino J. D'Angelo; Christopher E. Comer; John C. Kilgo; Cory D. Drennan; David A. Osborn; Karl V. Miller

2005-10-01T23:59:59.000Z

479

Rotor dynamic analysis of GCEP (Gas Centrifuge Enrichment Plant) Tails Withdrawal Test Facility AC-12 compressor  

SciTech Connect

The reliable operation of the centrifugal compressors utilized in the gaseous diffusion process is of great importance due to the critical function of these machines in product and tails withdrawal, cascade purge and evacuation processes, the purge cascade and product booster applications. The same compressors will be used in equally important applications within the Gas Centrifuge Enrichment Plant (GCEP). In response to concern over the excessive vibration exhibited by the AC-12 compressor in the No. 3 position of the GCEP Tails Withdrawal Test Facility, a rotor-bearing dynamic analysis was performed on the compressor. This analysis included the acquisition and reduction of compressor vibration data, characterization and modeling of the rotorbearing system, a computer dynamic study, and recommendations for machine modification. The compressor dynamic analysis was performed for rotor speeds of 9000 rpm and 7200 to 7800 rpm, which includes all possible opreating speeds of the compressor in the GCEP Test Facility. While the analysis was performed on this particular AC-12 compressor, the results should be pertinent to other AC-12 applications as well. Similar diagnostic and analytical techniques can be used to evaluate operation of other types of centrifugal compressors.

Spencer, J.W.

1982-01-22T23:59:59.000Z

480

Sharp-Tailed Grouse and Pygmy Rabbit Wildlife Mitigation Project : Final Environmental Assessment.  

SciTech Connect

The Proposed Action is needed to protect and enhance shrub-steppe and riparian habitat for sharp-tailed grouse (Tympanuchus phasianellus columbianus), Pygmy rabbits (Brachylagus idahoensis), and other indigenous wildlife species. The purpose of the Proposed Action is to compensate, in part, for wildlife habitat lost from the construction of Grand Coulee Dam and the inundation of Lake Roosevelt. Bonneville Power Administration proposes to fund management agreements, conservation easements, acquisition of fee title, or a combination of these on as many as 29,000 acres in Lincoln and Douglas Counties to improve shrub-steppe and riparian habitat for sharp-tailed grouse and pygmy rabbits. The BPA also proposes to fund habitat improvements (enhancements) on project lands including existing public lands. Proposed habitat treatments would include control of grazing; planting of native trees, shrubs, forbs and grasses; protection of wetlands and streambanks; herbicide use; fire prescriptions; and wildfire suppression. Proposed management activities may include predator control, population introductions, and control of crop depredation.

Untied States. Bonneville Power Adminsitration.

1992-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "moab mill tailings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Sharp-tailed Grouse and Pygmy Rabbit Wildlife Mitigation Project. Final Environmental Assessment  

SciTech Connect

The Proposed Action is needed to protect and enhance shrub-steppe and riparian habitat for sharp-tailed grouse (Tympanuchus phasianellus columbianus), Pygmy rabbits (Brachylagus idahoensis), and other indigenous wildlife species. The purpose of the Proposed Action is to compensate, in part, for wildlife habitat lost from the construction of Grand Coulee Dam and the inundation of Lake Roosevelt. Bonneville Power Administration proposes to fund management agreements, conservation easements, acquisition of fee title, or a combination of these on as many as 29,000 acres in Lincoln and Douglas Counties to improve shrub-steppe and riparian habitat for sharp-tailed grouse and pygmy rabbits. The BPA also proposes to fund habitat improvements (enhancements) on project lands including existing public lands. Proposed habitat treatments would include control of grazing; planting of native trees, shrubs, forbs and grasses; protection of wetlands and streambanks; herbicide use; fire prescriptions; and wildfire suppression. Proposed management activities may include predator control, population introductions, and control of crop depredation.

Not Available

1992-10-01T23:59:59.000Z

482

Vegetation success, seepage, and erosion on tailing sites reclaimed with cattle and biosolids  

SciTech Connect

Reclamation field studies were designed at the Phelps Dodge Morenci Mine in Arizona to evaluate the benefits of biosolids, cattle impact, and other treatment variables on soil-capped tailings. First-year monitoring has provided preliminary data about soil chemical and physical parameters, soil matrix potential profiles, erosion, and vegetation measurements of ground cover, biomass production and frequency. Plots were first seeded in January 1998 with a cover crop of oats or barley. Plots were seeded again in August 1998 with native and native plus non-native plant species. Early productivity from the second seeding was inversely related to seedling density. Plots capped with unamended Gila conglomerate (Gila) materials contained meager plant nutrient levels and produced numerous small seedlings that were poorly rooted and had little standing biomass. Vegetation on the cattle and biosolids treatments was vigorous and productive but at a much lower density than unamended Gila plots. Cattle treatment added little plant-nutrient value to the Gila cap compared to biosolids amendment. However, high rates of biosolids brought excessive salinity. Straw from the cattle treatment provided an effective mulch to improve soil moisture storage but increased the potential for deep seepage. Unamended Gila and biosolids plots had intermediate moisture storage and a modest potential for seepage compared to bare tailings. Mulch cover plus a lower rate of biosolids on Gila is seen as a promising, cost-effective amendment combination for future evaluation.

Vinson, J.; Jones, B.; Milczarek, M.; Hammermeister, D.; Word, J.

1999-07-01T23:59:59.000Z

483

The use of fecal nitrogen as an indicator of dietary protein content in white-tailed deer  

E-Print Network (OSTI)

THE USE 01' FEC. " L NITROGEN AS AN 1NDICATOR OF DIETARy PROTEIN CONTENT IN WHITE-TAILED DEER A Thesis PE UL EUGENE NASCORRO Submitted to the Grarluate College of Texas A6, N University . n partial fulfillment of the requirement for the degree... of MASTER OF SCIENCE Nay 1982 Na jor Subject: Nildlife and Fisheries Sciences THE USE OF FECAL NITROGEN AS AN INDICATOR OF DIETARY PROTEIN CONTENT IN WHITE-TAILED DEER Thesis by PAUL EUGENE MASCORRO Approved as to style and content by: '(Chairman...

Mascorro, Paul Eugene

2012-06-07T23:59:59.000Z

484

Social organization and group dynamics of white-tailed deer on brush-free coastal prairie in Texas  

E-Print Network (OSTI)

SOCIAL ORGANIZATION AND GROUP DYNAMICS OF WHITE-TAILED DEER ON BRUSH-FREE COASTAL PRAIRIE IN TEXAS A Thesis by WENDY MARGARET BROWN Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE August 1981 Major Subject: Wildlife and Fisheries Science SOCIAL ORGANIZATION AND GROUP DYNAMICS OF WHITE-TAILED DEER ON BRUSH-FREE COASTAL PRAIRIE IN TEXAS A Thesis by WENDY MARGARET BROWN Approved as to style...

Brown, Wendy Margaret

2012-06-07T23:59:59.000Z

485

Home ranging and habitat use by white-tailed deer on brush-free Texas coastal prairie  

E-Print Network (OSTI)

HOME RANGING AND HABITAT USE BY WHITE-TAILED DEER ON BRUSH-FREE TEXAS COASTAL PRAIRIE A Thesis by KENNETH LYNN GEE Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE August 1981 Major Subject: Nildlife and Fisheries Sciences HOME RANGING AND HABITAT USE BY WHITE-TAILED DEER ON BRUSH-FREE TEXAS COASTAL PRAIRIE A Thesis by KENNETH LYNN GEE Approved as to style and content by: (Chairman of Committee...

Gee, Kenneth L

2012-06-07T23:59:59.000Z

486

Movement of white-tailed deer in the eastern Edwards Plateau in response to land use practices  

E-Print Network (OSTI)

NOVEHENT OF WHITE-TAILED DEER IN THE EASTERN EDWARDS PLATEAU IN RESPONSE TO LAND USE PRACTICES A Thesis by RAY DUANE FAHLSING Submitted to the Graduate College of Texas AAH University in partial fulfillment of the requirement for the degree... of HASTER OF SCIENCE August 1985 Major Subject: Wildlife and Fisheries Sciences NOVEHENT OF WHITE-TAILED DEER IN THE EASTERN EDWARDS PLATEAU IN RESPONSE TO LAND USE PRACTICES A Thesis by RAY DUANE FAHLSING Approved as to style and content by: Jack H...

Fahlsing, Ray Duane

2012-06-07T23:59:59.000Z

487

Effects of a short duration grazing system on white-tailed deer (Odocoileus virginianus) in the Rio Grande Plain, Texas  

E-Print Network (OSTI)

EF'FECTS OF A SHCRT DURATION GRAZING SYSIKN ON WHITE-TAILED DEER (ODOCOILEUS VZRGINIANUS) ZN THE RIO GRANDE PLAIN, TEXAS A Thesis by VIN LEIGH ALLRED Submitted to the Graduate College of Texas AdH University in partial fulfillment... of the requirement for the degree of YASTER OF SCIENCE Nay 1980 Major Subject: Pange Science EFFECTS OF' A SHORT DURATION GRAZING SYSTEM ON WHITE-TAILED DEER (ODOCOILEUS VIRGINIANUS) IN THE RIO GRANDE PLAIN, TEXAS A Thesis by KEVIN LEIGH ALLRED Approved...

Allred, Kevin Leigh

2012-06-07T23:59:59.000Z

488

Silverthorn, Johnson, Mills, eds., Laboratory Manual for Physiology Copyright 2005 Pearson Education, Inc., publishing as Benjamin Cummings.  

E-Print Network (OSTI)

1 Silverthorn, Johnson, Mills, eds., Laboratory Manual for Physiology Copyright © 2005 Pearson and test-tube clamp for holding the tethered locust · wind tunnel (optional) fabricated from a utility fan

Dawson, Jeff W.

489

Small mill for the high-temperature rotary rolling of semifinished products composed of refractory metals in protective media  

Science Journals Connector (OSTI)

A description is presented of a small vacuum-type rotary rolling mill designed for the high-temperature deformation of semifinished products to obtain bars 710mm in diameter. It is shown that the CAD software Autodesk

S. M. Gorbatyuk; E. Z. Tuktarov; L. A. Rudenskii

2012-01-01T23:59:59.000Z

490

Production of carotenoids byPhaffia rhodozyma grown on media composed of corn wet-milling co-products  

Science Journals Connector (OSTI)

Natural isolates of the carotenoid-producing yeastPhaffia rhodozyma...were analyzed for their ability to grow and to produce carotenoids in culture media composed exclusively of co-products of corn wet-milling fo...

G. Thomas Hayman; Bruno M. Mannarelli

1995-05-01T23:59:59.000Z

491

Longest-Serving Active Paper Mill in the Western United States Uncovers New Ways to Save Energy  

Energy.gov (U.S. Department of Energy (DOE))

This case study describes how West Linn Paper Company's coated paper mill in West Linn, Oregon, saved nearly 58,200 MMBtu and $379,000 annually after receiving a DOE energy assessment and implementing steam system improvement recommendations.

492

Composition of sugar cane, energy cane, and sweet sorghum suitable for ethanol production at Louisiana sugar mills  

Science Journals Connector (OSTI)

A challenge facing the biofuel industry is to develop an economically viable and sustainable biorefinery. The existing potential biorefineries in Louisiana, raw sugar mills, operate only 3months of the year. For...

Misook Kim; Donal F. Day

2011-07-01T23:59:59.000Z

493

Safe Management of Residues from Former Uranium Mining and Milling Activities in Central Asian IAEA Regional Technical Cooperation Project  

Science Journals Connector (OSTI)

Several of the Central Asian countries of the former Soviet Union were involved in the uranium mining and milling industry from about 1945 for varying periods until the break up of the Soviet Union in 1991. Ev...

P. W. Waggitt

2008-01-01T23:59:59.000Z

494

Structural analysis of arabinoxylans isolated from ball-milled switchgrass biomass  

NLE Websites -- All DOE Office Websites (Extended Search)

analysis analysis of arabinoxylans isolated from ball-milled switchgrass biomass Koushik Mazumder, William S. York * Complex Carbohydrate Research Center, University of Georgia, 315 Riverbend Road, Athens, GA 30602, USA a r t i c l e i n f o Article history: Received 16 June 2010 Received in revised form 20 July 2010 Accepted 22 July 2010 Available online 30 July 2010 Keywords: Switchgrass Enzymatic digestion Arabinoxylan oligosaccharides Per-O-methylation Multiple-step mass spectrometry Structural analysis a b s t r a c t Ball-milled alcohol-insoluble residue (AIR) was prepared from switchgrass (Panicum virgatum var Alamo) and sequentially extracted with 50 mM ammonium oxalate buffer, 50 mM sodium carbonate, 1 M KOH containing 1% NaBH 4 , and 4 M KOH containing 1% NaBH 4 . Arabinoxylan was the most abundant component of the 1 M KOH-extracted fraction, which was treated with endoxylanase

495

Koopman-von Neumann Formulation of Classical Yang-Mills Theories: I  

E-Print Network (OSTI)

In this paper we present the Koopman-von Neumann (KvN) formulation of classical non-Abelian gauge field theories. In particular we shall explore the functional (or classical path integral) counterpart of the KvN method. In the quantum path integral quantization of Yang-Mills theories concepts like gauge-fixing and Faddeev-Popov determinant appear in a quite natural way. We will prove that these same objects are needed also in this classical path integral formulation for Yang-Mills theories. We shall also explore the classical path integral counterpart of the BFV formalism and build all the associated universal and gauge charges. These last are quite different from the analog quantum o