Sample records for mining productivity lead

  1. Standardization of Components, Products and Processes with Data Mining

    E-Print Network [OSTI]

    Kusiak, Andrew

    1 Standardization of Components, Products and Processes with Data Mining Bruno AGARD Département de databases. This paper discusses applications of data mining in standardization of components, products, and processes. Standardization of components is accomplished using association rules derived from customers

  2. Identification of lead chemical form in mine waste materials by X-ray absorption spectroscopy

    SciTech Connect (OSTI)

    Taga, Raijeli L.; Ng, Jack [University of Queensland, National Research Centre for Environmental Toxicology (EnTox), Brisbane, 4108 (Australia); Zheng Jiajia; Huynh, Trang; Noller, Barry [University of Queensland, Centre for Mined Land Rehabilitation, Brisbane, 4072 (Australia); Harris, Hugh H. [School of Chemistry and Physics, University of Adelaide, Adelaide, 5005 (Australia)

    2010-06-23T23:59:59.000Z

    X-ray absorption spectroscopy (XAS) provides a direct means for measuring lead chemical forms in complex samples. In this study, XAS was used to identify the presence of plumbojarosite (PbFe{sub 6}(SO{sub 4}){sub 4}(OH){sub 12}) by lead L{sub 3}-edge XANES spectra in mine waste from a small gold mining operation in Fiji. The presence of plumbojarosite in tailings was confirmed by XRD but XANES gave better resolution. The potential for human uptake of Pb from tailings was measured using a physiologically based extract test (PBET), an in-vitro bioaccessibility (BAc) method. The BAc of Pb was 55%. Particle size distribution of tailings indicated that 40% of PM{sub 10} particulates exist which could be a potential risk for respiratory effects via the inhalation route. Food items collected in the proximity of the mine site had lead concentrations which exceed food standard guidelines. Lead within the mining lease exceeded sediment guidelines. The results from this study are used to investigate exposure pathways via ingestion and inhalation for potential risk exposure pathways of Pb in that locality. The highest Pb concentration in soil and tailings was 25,839 mg/kg, exceeding the Australian National Environment Protection Measure (NEPM) soil health investigation levels.

  3. Childhood lead poisoning near abandoned lead mining and smelting areas: A case study of two affected households

    SciTech Connect (OSTI)

    Moehr, A.D. (Jasper County Health Dept., Webb City, MO (United States)); Roberts, D.W.; Phillips, P.E.; Evans, R.G.

    1993-10-01T23:59:59.000Z

    In October, 1990 the Missouri Dept. of Health entered a contract with the Agency for Toxic Substances and Disease Registry (ATSDR) to conduct an exposure study at the Jasper County, Missouri Superfund Site. The primary concern was exposure to elevated levels of lead and cadmium resulting from previous mining of lead and zinc in the area. Several individuals were found to have elevated lead levels and this article is a case study of two households where children with elevated levels resided. Due to the lowering of the Centers for Disease Control and Prevention (CDC) standard for a level of concern in childhood lead poisoning from 25 [mu]g/dl to 10 [mu]g/dl, many environmental heath personnel may be requested to evaluate exposure routes and give advice regarding risk reduction to families who reside in areas not previously thought to be problematic. Accomplishing this risk reduction may require passage of local ordinances requiring lead abatement, additional training of field personnel, and cooperative work with other public and governmental entities.

  4. Effective Conveyor Belt Inspection for Improved Mining Productivity

    SciTech Connect (OSTI)

    Chris Fromme

    2006-06-01T23:59:59.000Z

    This document details progress on the project entitled ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2004 to May 14, 2004. Highlights include fabrication of low-cost prototype hardware, acquisition of infrared thermal data, and initial design of a Smart-Camera based system.

  5. Effective Conveyor Belt Inspection for Improved Mining Productivity

    SciTech Connect (OSTI)

    Chris Fromme

    2006-06-01T23:59:59.000Z

    This document details progress on the project entitled ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2004 to May 14, 2004. Highlights include fabrication of an improved LED lightbar, fabrication of a line-scan sensor head for the Smart-Camera based prototype, and development of prototype vulcanized splice detection algorithms.

  6. Bull World Health Organ 2012;90:878886 |doi:10.2471/BLT.12.106419 Lead exposure from soil in Peruvian mining towns: a national

    E-Print Network [OSTI]

    van Geen, Alexander

    the world's top five producers of silver, zinc, lead and copper5 and has a long and conflict-ridden mining processing plants and smelters in other parts of the world have already been shown to reduce dramatically of mining silver, copper, zinc and lead deposits throughout the region. Today when a new mine enters

  7. [Data in metric tons of yttrium oxide (Y2O3) content unless otherwise noted] Domestic Production and Use: Rare earths were mined by one U.S. company in 2013. Bastnasite, a rare-earth

    E-Print Network [OSTI]

    to represent 0.12 percent of the rare-earth elements in the Mountain Pass bastnasite ore. The leading end uses Production and Use: Rare earths were mined by one U.S. company in 2013. Bastnasite, a rare-earth fluorocarbonate mineral, was mined as a primary product at Mountain Pass, CA. Domestic production of rare-earth

  8. Leading Particle Production in Light Flavour Jets

    E-Print Network [OSTI]

    Abbiendi, G; Åkesson, P F; Alexander, Gideon; Allison, J; Anderson, K J; Arcelli, S; Asai, S; Ashby, S F; Axen, D A; Azuelos, Georges; Bailey, I; Ball, A H; Barberio, E; Barlow, R J; Batley, J Richard; Baumann, S; Behnke, T; Bell, K W; Bella, G; Bellerive, A; Bentvelsen, Stanislaus Cornelius Maria; Bethke, Siegfried; Betts, S; Biebel, O; Biguzzi, A; Bloodworth, Ian J; Bock, P; Böhme, J; Boeriu, O; Bonacorsi, D; Boutemeur, M; Braibant, S; Bright-Thomas, P G; Brigliadori, L; Brown, R M; Burckhart, Helfried J; Capiluppi, P; Carnegie, R K; Carter, A A; Carter, J R; Chang, C Y; Charlton, D G; Chrisman, D; Ciocca, C; Clarke, P E L; Clay, E; Cohen, I; Conboy, J E; Cooke, O C; Couchman, J; Couyoumtzelis, C; Coxe, R L; Cuffiani, M; Dado, S; Dallavalle, G M; Dallison, S; Davis, R; de Roeck, A; Dervan, P J; Desch, Klaus; Dienes, B; Dixit, M S; Donkers, M; Dubbert, J; Duchovni, E; Duckeck, G; Duerdoth, I P; Estabrooks, P G; Etzion, E; Fabbri, Franco Luigi; Fanfani, A; Fanti, M; Faust, A A; Feld, L; Ferrari, P; Fiedler, F; Fierro, M; Fleck, I; Frey, A; Fürtjes, A; Futyan, D I; Gagnon, P; Gary, J W; Gaycken, G; Geich-Gimbel, C; Giacomelli, G; Giacomelli, P; Gingrich, D M; Glenzinski, D A; Goldberg, J; Gorn, W; Grandi, C; Graham, K; Gross, E; Grunhaus, Jacob; Gruwé, M; Hajdu, C; Hanson, G G; Hansroul, M; Hapke, M; Harder, K; Harel, A; Hargrove, C K; Harin-Dirac, M; Hauschild, M; Hawkes, C M; Hawkings, R; Hemingway, Richard J; Herten, G; Heuer, R D; Hildreth, M D; Hill, J C; Hobson, P R; Höcker, Andreas; Hoffman, K; Homer, R James; Honma, A K; Horváth, D; Hossain, K R; Howard, R; Hüntemeyer, P; Igo-Kemenes, P; Imrie, D C; Ishii, K; Jacob, F R; Jawahery, A; Jeremie, H; Jimack, Martin Paul; Jones, C R; Jovanovic, P; Junk, T R; Kanaya, N; Kanzaki, J I; Karapetian, G V; Karlen, D A; Kartvelishvili, V G; Kawagoe, K; Kawamoto, T; Kayal, P I; Keeler, Richard K; Kellogg, R G; Kennedy, B W; Kim, D H; Klier, A; Kobayashi, T; Kobel, M; Kokott, T P; Kolrep, M; Komamiya, S; Kowalewski, R V; Kress, T; Krieger, P; Von Krogh, J; Kühl, T; Kupper, M; Kyberd, P; Lafferty, G D; Landsman, Hagar Yaël; Lanske, D; Lauber, J; Lawson, I; Layter, J G; Lellouch, Daniel; Letts, J; Levinson, L; Liebisch, R; Lillich, J; List, B; Littlewood, C; Lloyd, A W; Lloyd, S L; Loebinger, F K; Long, G D; Losty, Michael J; Lü, J; Ludwig, J; Macchiolo, A; MacPherson, A L; Mader, W F; Mannelli, M; Marcellini, S; Marchant, T E; Martin, A J; Martin, J P; Martínez, G; Mashimo, T; Mättig, P; McDonald, W J; McKenna, J A; McKigney, E A; McMahon, T J; McPherson, R A; Meijers, F; Méndez-Lorenzo, P; Merritt, F S; Mes, H; Meyer, I; Michelini, Aldo; Mihara, S; Mikenberg, G; Miller, D J; Mohr, W; Montanari, A; Mori, T; Nagai, K; Nakamura, I; Neal, H A; Nisius, R; O'Neale, S W; Oakham, F G; Odorici, F; Ögren, H O; Okpara, A N; Oreglia, M J; Orito, S; Pásztor, G; Pater, J R; Patrick, G N; Patt, J; Pérez-Ochoa, R; Petzold, S; Pfeifenschneider, P; Pilcher, J E; Pinfold, James L; Plane, D E; Poli, B; Polok, J; Przybycien, M B; Quadt, A; Rembser, C; Rick, Hartmut; Robins, S A; Rodning, N L; Roney, J M; Rosati, S; Roscoe, K; Rossi, A M; Rozen, Y; Runge, K; Runólfsson, O; Rust, D R; Sachs, K; Saeki, T; Sahr, O; Sang, W M; Sarkisyan-Grinbaum, E; Sbarra, C; Schaile, A D; Schaile, O; Scharff-Hansen, P; Schieck, J; Schmitt, S; Schöning, A; Schröder, M; Schumacher, M; Schwick, C; Scott, W G; Seuster, R; Shears, T G; Shen, B C; Shepherd-Themistocleous, C H; Sherwood, P; Siroli, G P; Skuja, A; Smith, A M; Snow, G A; Sobie, Randall J; Söldner-Rembold, S; Spagnolo, S; Sproston, M; Stahl, A; Stephens, K; Stoll, K; Strom, D; Ströhmer, R; Surrow, B; Talbot, S D; Taras, P; Tarem, S; Teuscher, R; Thiergen, M; Thomas, J; Thomson, M A; Torrence, E; Towers, S; Trefzger, T M; Trigger, I; Trócsányi, Z L; Tsur, E; Turner-Watson, M F; Ueda, I; Van Kooten, R; Vannerem, P; Verzocchi, M; Voss, H; Wäckerle, F; Waller, D; Ward, C P; Ward, D R; Watkins, P M; Watson, A T; Watson, N K; Wells, P S; Wengler, T; Wermes, N; Wetterling, D; White, J S; Wilson, G W; Wilson, J A; Wyatt, T R; Yamashita, S; Zacek, V; Zer-Zion, D

    2000-01-01T23:59:59.000Z

    The energy distribution and type of the particle with the highest momentum in quark jets are determined for each of the five quark flavours making only minimal model assumptions. The analysis is based on a large statistics sample of hadronic Z0 decays collected with the OPAL detector at the LEP e+e- collider. These results provide a basis for future studies of light flavour production at other centre-of-mass energies. We use our results to study the hadronisation mechanism in light flavour jets and compare the data to the QCD models JETSET and HERWIG. Within the JETSET model we also directly determine the suppression of strange quarks to be gamma_s=0.422+-0.049 (stat.)+-0.059 (syst.) by comparing the production of charged and neutral kaons in strange and non-strange light quark events. Finally we study the features of baryon production.

  9. Metal contamination of soils and crops affected by the Chenzhou lead/zinc mine spill (Hunan, China)

    E-Print Network [OSTI]

    Mailhes, Corinne

    Metal contamination of soils and crops affected by the Chenzhou lead/zinc mine spill (Hunan, China Avenue Edouard Belin, 31400 Toulouse, France b Department of Environmental Science, Hunan Agricultural polluted with As, Cd, Zn, Pb and Cu. The contamination levels were in the order of GYBNSZYNJTC showing

  10. Assessment of water resources in lead-zinc mined areas in Cherokee County, Kansas, and adjacent areas

    SciTech Connect (OSTI)

    Spruill, T.B.

    1984-01-01T23:59:59.000Z

    A study was conducted to evaluate water-resources problems related to abandoned lead and zinc mines in Cherokee County, Kansas, and adjacent areas in Missouri and Oklahoma. Past mining activities have caused changes in the hydrogeology of the area. Lead and zinc mining has caused discontinuities and perforations in the confining shale west of the Pennsylvanian-Mississippian geologic contact (referred to as the western area), which have created artificial ground-water recharge and discharge areas. Recharge to the shallow aquifer (rocks of Mississippian age) through collapses, shafts, and drill holes in the shale has caused the formation of a groundwater ''mound'' in the vicinity of the Picher Field in Kansas and Oklahoma. Discharge of mine-contaminated ground water to Tar Creek occurs in Oklahoma from drill holes and shafts where the potentiometric surface of the shallow aquifer is above the land surface. Mining of ore in the shallow aquifer has resulted in extensive fracturing and removal of material, which has created highly transmissive zones and voids and increased ground-water storage properties of the aquifer. In the area east of the Pennsylvanian-Mississippian geologic contact (referred to as the eastern area), fractured rock and tailings on the land surface increased the amount of water available for infiltration to the shallow aquifer; in the western area, tailings on the impermeable shale created artificial, perched aquifer systems that slowly drain to surface streams. 45 refs., 23 figs., 21 tabs.

  11. CO2 gas production understanding above a partly flooded coal post-mining area

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    - The Westphalian deposit is constituted by numerous exploited coal seams of different thicknesses. These seamsCO2 gas production understanding above a partly flooded coal post-mining area Candice Lagnya, a former coal mining area. To understand the origin of this production, a borehole of 90 meters deep

  12. Mining and Gas and Oil Production (North Dakota)

    Broader source: Energy.gov [DOE]

    This chapter of the North Dakota Code contains provisions for oil, gas, and coal mining and the development of geothermal resources. This chapter addresses claims to mines, licensing and control of...

  13. Automated genome mining of ribosomal peptide natural products

    SciTech Connect (OSTI)

    Mohimani, Hosein; Kersten, Roland; Liu, Wei; Wang, Mingxun; Purvine, Samuel O.; Wu, Si; Brewer, Heather M.; Pasa-Tolic, Ljiljana; Bandeira, Nuno; Moore, Bradley S.; Pevzner, Pavel A.; Dorrestein, Pieter C.

    2014-07-31T23:59:59.000Z

    Ribosomally synthesized and posttranslationally modified peptides (RiPPs), especially from microbial sources, are a large group of bioactive natural products that are a promising source of new (bio)chemistry and bioactivity (1). In light of exponentially increasing microbial genome databases and improved mass spectrometry (MS)-based metabolomic platforms, there is a need for computational tools that connect natural product genotypes predicted from microbial genome sequences with their corresponding chemotypes from metabolomic datasets. Here, we introduce RiPPquest, a tandem mass spectrometry database search tool for identification of microbial RiPPs and apply it for lanthipeptide discovery. RiPPquest uses genomics to limit search space to the vicinity of RiPP biosynthetic genes and proteomics to analyze extensive peptide modifications and compute p-values of peptide-spectrum matches (PSMs). We highlight RiPPquest by connection of multiple RiPPs from extracts of Streptomyces to their gene clusters and by the discovery of a new class III lanthipeptide, informatipeptin, from Streptomyces viridochromogenes DSM 40736 as the first natural product to be identified in an automated fashion by genome mining. The presented tool is available at cy-clo.ucsd.edu.

  14. Mining

    Broader source: Energy.gov [DOE]

    Supply and cost management–including energy costs–pose key challenges for U.S. mining companies. The industry has worked with AMO to develop a range of resources for increasing energy efficiency and reducing costs.

  15. Assessment of water resources in lead-zinc mined areas in Cherokee County, Kansas, and adjacent areas

    SciTech Connect (OSTI)

    Spruill, T.B.

    1987-01-01T23:59:59.000Z

    A study was conducted to evaluate water resources problems related to abandoned lead and zinc mines in Cherokee County, Kansas, and adjacent areas in Missouri and Oklahoma. Past mining activities have caused changes in the geohydrology of the area. Discharge of mine-contaminated groundwater to Tar Creek occurs in Oklahoma from drill holes and shafts where the potentiometric surface of the shallow aquifer is above the land surface. Pumping of the deep aquifer has resulted in a potential for downward movement of water from the shallow aquifer. Water from mines in the eastern area contained dissolved solids concentrations of < 500 mg/L a median pH of 3.9, sulfate concentrations that ranged between 98 and 290 mg/L, and median concentrations for zinc of 37,600 micrograms/L (ug/L) for lead of 240 ug/L, for cadmium of 180 ug/L, for iron of 70 ug/L, for manganese of 240 ug/L, and for silica of 15 mg/L. Water from mines in the western area contained dissolved solids concentrations of generally > 500 mg/L, a median pH of 6.8, sulfate concentrations that ranged between 170 and 2,150 mg/L, and median concentrations for zinc of 3,200 ug/L for lead of 0 ug/L. No conclusive evidence of lateral migration of water from the mines into domestic well water supplies in the shallow aquifer was found in the study area in Kansas. Effects of abandoned lead and zinc mines on tributaries of the Spring River in the eastern area are most severe in Short Creek. Drainage from tailings cause large concentrations of sulfate, zinc, and cadmium in Tar Creek in Kansas. Compared with four other major streams in the western area in Kansas, Tar Creek contained the largest low flow concentrations of sulfate (910 mg/L), zinc (5,800 ug/L), and cadmium (40 ug/L). 45 refs., 23 figs., 26 tabs.

  16. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, Arokiasamy J. (Middle Island, NY); Dodge, Cleveland (Wading River, NY); Chendrayan, Krishnachetty (Coimbatore Tamil Nadu, IN); Quinby, Helen L. (Cambridge, MD)

    1988-01-01T23:59:59.000Z

    The present invention relates to an anaerobic bacterial culture of Clostridium sp. ATCC No. 53464 which solubilizes lead oxide under anaerobic conditions in coal and industrial wastes and therefore presents a method of removing lead from such wastes before they are dumped into the environment. The rate of lead dissolution during logarithmic growth of the bacteria in 40 ml medium containing 3.32 .mu.moles of lead as lead oxide was 0.042 .mu.moles ml.sup.-1 hr.sup.-1. Dissolution of lead oxide by the bacterial isolate is due to the production of metabolites and acidity in the culture medium. The major metabolites are acetic, butyric and lactic acid. Clostridium sp. ATCC No. 53464 can be used in the recovery of strategic metals from ores and wastes and also for the production of lactic acid for commercial purposes. The process yields large quantities of lactic acid as well as lead complexed in a stable form with said acids.

  17. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, A.J.; Dodge, C.; Chendrayan, K.; Quinby, H.L.

    1987-04-16T23:59:59.000Z

    The present invention related to an anaerobic bacterial culture of Clostridium sp. ATCC No. 53464 which solubilizes lead oxide under anaerobic conditions in coal and industrial wastes and therefore presents a method of removing lead from such wastes before they are dumped into the environment. The rat of lead dissolution during logarithmic growth of the bacteria in 40 ml medium containing 3.32 ..mu..moles of lead as lead oxide was 0.042 ..mu..moles m1/sup /-/1/ hr/sup /-/1/. Dissolution of lead oxide by the bacterial isolate is due to the production of metabolites and acidity in the culture medium. The major metabolites are acetic, butyric and lactic acid. The major metabolites are acetic, butyric and lactic acid. Clostridium sp. ATCC No. 53464 can be used in the recovery of the strategic metals from ores and wastes and also for the production of lactic acid for commercial purposes. The process yields large quantities of lactic acid as well as lead complexed in a stable form with said acids. 4 figs., 3 tabs.

  18. Comparison of leading and next-to-leading logarithmic electroweak corrections to Higgs production

    E-Print Network [OSTI]

    Fabio Siringo

    2013-07-29T23:59:59.000Z

    Using soft-collinear effective theory, the leading-log radiative electroweak corrections are written in a closed and analytical form for the hadronic cross section of Higgs production through vector boson fusion, qq->qqH, one of the most promising channels for studying the Higgs boson at the LHC. The simple leading-log resummation is compared with a full next-to-leading-log calculation, and its accuracy is found to be of order 1% up to 10 TeV, i.e. better than the accuracy of PDFs. Corrections are found to be larger than predicted by one-loop fixed order approximations at LHC energies. The method provides a simple way of incorporating the electroweak corrections in software packages, improving the accuracy of simulations.

  19. Comparison of leading and next-to-leading logarithmic electroweak corrections to Higgs production

    E-Print Network [OSTI]

    Siringo, Fabio

    2013-01-01T23:59:59.000Z

    Using soft-collinear effective theory, the leading-log radiative electroweak corrections are written in a closed and analytical form for the hadronic cross section of Higgs production through vector boson fusion, qq->qqH, one of the most promising channels for studying the Higgs boson at the LHC. The simple leading-log resummation is compared with a full next-to-leading-log calculation, and its accuracy is found to be of order 1% up to 10 TeV, i.e. comparable with the accuracy of PDFs. Corrections are found to be larger than predicted by one-loop fixed order approximations at LHC energies. The method provides a simple way of incorporating the electroweak corrections in software packages, improving the accuracy of simulations.

  20. Longwall mining

    SciTech Connect (OSTI)

    NONE

    1995-03-14T23:59:59.000Z

    As part of EIA`s program to provide information on coal, this report, Longwall-Mining, describes longwall mining and compares it with other underground mining methods. Using data from EIA and private sector surveys, the report describes major changes in the geologic, technological, and operating characteristics of longwall mining over the past decade. Most important, the report shows how these changes led to dramatic improvements in longwall mining productivity. For readers interested in the history of longwall mining and greater detail on recent developments affecting longwall mining, the report includes a bibliography.

  1. High-volume, high-value usage of flue gas desulfurization (FGD) by-products in underground mines - Phase I: Laboratory investigations. Quarterly report, October 1993--December 1993

    SciTech Connect (OSTI)

    Not Available

    1994-03-01T23:59:59.000Z

    This project proposes to use pneumatically or hydraulically emplaced dry-flue gas desulfurization (FGD) by-products to backfill the adits left by highwall mining. Backfilling highwall mine adits with dry-FGD materials is technically attractive. The use of an active highwall mine would allow the dry-FGD material to be brought in using the same transportation network used to move the coal out, eliminating the need to recreated the transportation infrastructure, thereby saving costs. Activities during the period included the negotiations leading to the final cooperative agreement for the project and the implementation of the necessary instruments at the University of Kentucky to administer the project. Early in the negotiations, a final agreement on a task structure was reached and a milestone plan was filed. A review was initiated of the original laboratory plan as presented in the proposal, and tentative modifications were developed. Selection of a mine site was made early; the Pleasant Valley mine in Greenup County was chosen. Several visits were made to the mine site to begin work on the hydrologic monitoring plan. The investigation of the types of permits needed to conduct the project was initiated. Considerations concerning the acceptance and implementation of technologies led to the choice of circulating fluidized bed ash as the primary material for the study. Finally, the membership of a Technical Advisory Committee for the study was assembled.

  2. Automated genome mining of ribosomal peptide natural products. | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone byDearTechnical InformationAugust 29,with Highgenome mining

  3. Historical mining and smelting in the Vosges Mountains (France) recorded in two ombrotrophic peat bogs

    E-Print Network [OSTI]

    Demouchy, Sylvie

    resources (lead, silver, copper, and iron) they have provided through the ages. Metal production is attested-Marie-aux-Mines, counted 3000 miners, 600 mines and prospection areas, 12 smelters, and 150 km of galleries (Fluck and Weil

  4. Anaerobic microbial dissolution of lead and production of organic acids

    DOE Patents [OSTI]

    Francis, A.J.; Dodge, C.; Chendrayan, K.

    1986-02-28T23:59:59.000Z

    The present invention relates to a method of solubilizing lead, in the form of lead oxide, found in industrial wastes, before these wastes are dumped into the environment. The lead is solubilized by dissolving the lead oxide in the wastes through contact with an anaerobic bacterial culture containing the bacterium ATCC No. 53464. The solubilized lead can then be removed from the wastes by chemical separation. It could also be removed by extending the contact period with the bacterial culture. As the culture grows, the solubilized lead is removed from the wastes by bioaccumulation by the microorganism or by immobilization by a polymer-like material produced by the microorganism. At this point, the lead is then removed from the wastes when the waste material is separated from the bacterial culture. If desired, the bacterial culture could be digested at this point to yield relatively pure lead for further industrial use.

  5. Exploration of Opportunities to Reduce Lead Times for Engineered-to-Order Products

    E-Print Network [OSTI]

    Tommelein, Iris D.

    Exploration of Opportunities to Reduce Lead Times for Engineered-to-Order Products by Jan Alarik;Abstract Exploration of Opportunities to Reduce Lead Times for Engineered-To-Order Products by Jan Alarik proposes alternative practices to improve the current process of ETO products that can lead to major

  6. Lead

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't Happen to HighJosephNOx Traps forLM2LarryLaws andtopic Lead

  7. The effects of part commonality on product development lead time

    E-Print Network [OSTI]

    Svensson, Nicholas, 1965-

    2005-01-01T23:59:59.000Z

    Nortel Networks, a leading global supplier of telecommunications equipment, is engaged in an increasingly competitive global market place. Within this market, Nortel Networks is positioning itself as the leader of global ...

  8. The production of acid mine drainage (AMD) from sur-face and underground coal mines in northern West Virginia

    E-Print Network [OSTI]

    Wilson, Thomas H.

    West Virginia is a major environmental problem and continues to receive much attention in affected (Figure 1) has produced some of the worst AMD problems in West Virginia surface mines due to low pH, high was successfully completed by Nobes and McCahon (1999). Data were collected over a mine spoil area in northern West

  9. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    SciTech Connect (OSTI)

    Jonathan Aggett

    2003-12-15T23:59:59.000Z

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. In this segment of work, our goal was to review methods for estimating tree survival, growth, yield and value of forests growing on surface mined land in the eastern coalfields of the USA, and to determine the extent to which carbon sequestration is influenced by these factors. Public Law 95-87, the Surface Mining Control and Reclamation Act of 1977 (SMCRA), mandates that mined land be reclaimed in a fashion that renders the land at least as productive after mining as it was before mining. In the central Appalachian region, where prime farmland and economic development opportunities for mined land are scarce, the most practical land use choices are hayland/pasture, wildlife habitat, or forest land. Since 1977, the majority of mined land has been reclaimed as hayland/pasture or wildlife habitat, which is less expensive to reclaim than forest land, since there are no tree planting costs. As a result, there are now hundreds of thousands of hectares of grasslands and scrublands in various stages of natural succession located throughout otherwise forested mountains in the U.S. A literature review was done to develop the basis for an economic feasibility study of a range of land-use conversion scenarios. Procedures were developed for both mixed hardwoods and white pine under a set of low product prices and under a set of high product prices. Economic feasibility is based on land expectation values. Further, our review shows that three types of incentive schemes might be important: (1) lump sum payment at planting (and equivalent series of annual payments); (2) revenue incentive at harvest; and (3) benefit based on carbon volume.

  10. (Data in thousand metric tons of zinc content, unless otherwise noted) Domestic Production and Use: The value of zinc mined in 2000, based on contained zinc recoverable from

    E-Print Network [OSTI]

    three-fourths of production. Three primary and 12 large- and medium-sized secondary smelters refined 92 Employment: Mine and mill, numbere 2,700 2,500 2,400 2,500 2,600 Smelter primary, numbere 1,000 1 production of zinc concentrate by about 3% in 2000. U.S. mine production greatly exceeded smelter capacity

  11. Radio-Ecological Situation in the Area of the Priargun Production Mining and Chemical Association - 13522

    SciTech Connect (OSTI)

    Semenova, M.P.; Seregin, V.A.; Kiselev, S.M.; Titov, A.V. [FSBI SRC A.I. Burnasyan Federal Medical Biophysical Center of FMBA of Russia, Zhivopisnaya Street, 46, Moscow (Russian Federation)] [FSBI SRC A.I. Burnasyan Federal Medical Biophysical Center of FMBA of Russia, Zhivopisnaya Street, 46, Moscow (Russian Federation); Zhuravleva, L.A. [FSHE 'Centre of Hygiene and Epidemiology no. 107' under FMBA of Russia (Russian Federation)] [FSHE 'Centre of Hygiene and Epidemiology no. 107' under FMBA of Russia (Russian Federation); Marenny, A.M. [Ltd 'Radiation and Environmental Researches' (Russian Federation)] [Ltd 'Radiation and Environmental Researches' (Russian Federation)

    2013-07-01T23:59:59.000Z

    'The Priargun Production Mining and Chemical Association' (hereinafter referred to as PPMCA) is a diversified mining company which, in addition to underground mining of uranium ore, carries out refining of such ores in hydrometallurgical process to produce natural uranium oxide. The PPMCA facilities are sources of radiation and chemical contamination of the environment in the areas of their location. In order to establish the strategy and develop criteria for the site remediation, independent radiation hygienic monitoring is being carried out over some years. In particular, this monitoring includes determination of concentration of the main dose-forming nuclides in the environmental media. The subjects of research include: soil, grass and local foodstuff (milk and potato), as well as media of open ponds (water, bottom sediments, water vegetation). We also measured the radon activity concentration inside surface workshops and auxiliaries. We determined the specific activity of the following natural radionuclides: U-238, Th-232, K-40, Ra-226. The researches performed showed that in soil, vegetation, groundwater and local foods sampled in the vicinity of the uranium mines, there is a significant excess of {sup 226}Ra and {sup 232}Th content compared to areas outside the zone of influence of uranium mining. The ecological and hygienic situation is as follows: - at health protection zone (HPZ) gamma dose rate outdoors varies within 0.11 to 5.4 ?Sv/h (The mean value in the reference (background) settlement (Soktui-Molozan village) is 0.14 ?Sv/h); - gamma dose rate in workshops within HPZ varies over the range 0.14 - 4.3 ?Sv/h. - the specific activity of natural radionuclides in soil at HPZ reaches 12800 Bq/kg and 510 Bq/kg for Ra-226 and Th-232, respectively. - beyond HPZ the elevated values for {sup 226}Ra have been registered near Lantsovo Lake - 430 Bq/kg; - the radon activity concentration in workshops within HPZ varies over the range 22 - 10800 Bq/m{sup 3}. The seasonal dependence of radon activity concentration is observed in the air of workshops (radon levels are lower in winter in comparison with spring-summer period). - in drinking water, intervention levels by gross alpha activity and by some radionuclides, in particular by Rn-222, are in excess. Annual effective dose of internal exposure due to ingestion of such water will be 0.14-0.28 mSv. (authors)

  12. Premium Fuel Production From Mining and Timber Waste Using Advanced Separation and Pelletizing Technologies

    SciTech Connect (OSTI)

    Honaker, R. Q.; Taulbee, D.; Parekh, B. K.; Tao, D.

    2005-12-05T23:59:59.000Z

    The Commonwealth of Kentucky is one of the leading states in the production of both coal and timber. As a result of mining and processing coal, an estimated 3 million tons of fine coal are disposed annually to waste-slurry impoundments with an additional 500 million tons stored at a number of disposal sites around the state due to past practices. Likewise, the Kentucky timber industry discards nearly 35,000 tons of sawdust on the production site due to unfavorable economics of transporting the material to industrial boilers for use as a fuel. With an average heating value of 6,700 Btu/lb, the monetary value of the energy disposed in the form of sawdust is approximately $490,000 annually. Since the two industries are typically in close proximity, one promising avenue is to selectively recover and dewater the fine-coal particles and then briquette them with sawdust to produce a high-value fuel. The benefits are i) a premium fuel product that is low in moisture and can be handled, transported, and utilized in existing infrastructure, thereby avoiding significant additional capital investment and ii) a reduction in the amount of fine-waste material produced by the two industries that must now be disposed at a significant financial and environmental price. As such, the goal of this project was to evaluate the feasibility of producing a premium fuel with a heating value greater than 10,000 Btu/lb from waste materials generated by the coal and timber industries. Laboratory and pilot-scale testing of the briquetting process indicated that the goal was successfully achieved. Low-ash briquettes containing 5% to 10% sawdust were produced with energy values that were well in excess of 12,000 Btu/lb. A major economic hurdle associated with commercially briquetting coal is binder cost. Approximately fifty binder formulations, both with and without lime, were subjected to an extensive laboratory evaluation to assess their relative technical and economical effectiveness as binding agents for the briquetting of 90% coal and 10% sawdust blends. Guar gum, wheat starch, and a multi-component formulation were identified as most cost-effective for the production of briquettes targeted for the pulverized-coal market with costs being around $8 per ton of the coal-sawdust blend. REAX/lime and a second multi-component formulation were identified as the most cost-effective for the production of briquettes targeted for the stoker-coal market. Various sources of sawdust generated from different wood types were also investigated to determine their chemical properties and to evaluate their relative performance when briquetted with clean coal to form a premium fuel. The highest heating values, approaching 7,000 Btu/lb, were obtained from oak. Sawdusts from higher-density, red oak, white oak, hickory, and beech trees provided higher quality briquettes relative to their lower-density counterparts. In addition to sawdust type, a number of other parameters were evaluated to characterize their impact on briquette properties. The parameters that exhibited the greatest impact on briquette performance were binder concentration; sawdust concentration and particle size; cure temperature; and ash content. Parameters that had the least impact on briquette properties, at least over the ranges studied, were moisture content, briquetting force, and briquetting dwell time. The continuous production of briquettes from a blend of coal and sawdust was evaluated using a 200 lbs/hr Komarek Model B-100 briquetter. The heating values of briquettes produced by the unit exceeded the goal of the project by a large margin. A significant observation was the role of feed moisture on the stability of the mass flow rate through the briquetter and on briquette strength. Excessive feed moisture levels caused inconsistent or stoppage of material flow through the feed hopper and resulted in the production of variable-quality briquettes. Obviously, the limit on feed moisture content has a significant impact on the economics of coal-sawdust briquetting since it will ultimately dictate dew

  13. (Data in metric tons of lithium content unless otherwise noted) Domestic Production and Use: The only commercially active lithium mine in the United States was a brine

    E-Print Network [OSTI]

    94 LITHIUM (Data in metric tons of lithium content unless otherwise noted) Domestic Production and Use: The only commercially active lithium mine in the United States was a brine operation in Nevada. The mine's production capacity was expanded in 2012, and a new lithium hydroxide plant opened in North

  14. WIRELESS MINE-WIDE TELECOMMUNICATIONS TECHNOLOGY

    SciTech Connect (OSTI)

    Zvi H. Meiksin

    2004-03-01T23:59:59.000Z

    A comprehensive mine-wide, two-way wireless voice and data communication system for the underground mining industry was developed. The system achieves energy savings through increased productivity and greater energy efficiency in meeting safety requirements within mines. The mine-wide system is comprised of two interfaced subsystems: a through-the-earth communications system and an in-mine communications system. The mine-wide system permits two-way communication among underground personnel and between underground and surface personnel. The system was designed, built, and commercialized. Several systems are in operation in underground mines in the United States. The use of these systems has proven they result in considerable energy savings. A system for tracking the location of vehicles and people within the mine was also developed, built and tested successfully. Transtek's systems are being used by the National Institute of Occupational Safety and Health (NIOSH) in their underground mine rescue team training program. This project also resulted in a spin-off rescue team lifeline and communications system. Furthermore, the project points the way to further developments that can lead to a GPS-like system for underground mines allowing the use of autonomous machines in underground mining operations, greatly reducing the amount of energy used in these operations. Some products developed under this program are transferable to applications in fields other than mining. The rescue team system is applicable to use by first responders to natural, accidental, or terrorist-caused building collapses. The in-mine communications system can be installed in high-rise buildings providing in-building communications to security and maintenance personnel as well as to first responders.

  15. Charged-Higgs-boson production at the LHC: Next-to-leading-order supersymmetric QCD corrections

    SciTech Connect (OSTI)

    Dittmaier, Stefan; Kraemer, Michael; Spira, Michael; Walser, Manuel [Physikalisches Institut, Albert-Ludwigs-Universitaet Freiburg, D-79104 Freiburg (Germany); Max-Planck-Institut fuer Physik (Werner-Heisenberg-Institut), Foehringer Ring 6, D-80805 Muenchen (Germany); Institute for Theoretical Particle Physics and Cosmology, RWTH Aachen University, D-52056 Aachen (Germany); Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Institute for Theoretical Physics, ETH Zuerich, CH-8093 Zuerich (Switzerland)

    2011-03-01T23:59:59.000Z

    The dominant production process for heavy charged-Higgs bosons at the LHC is the associated production with heavy quarks. We have calculated the next-to-leading-order supersymmetric QCD corrections to charged-Higgs production through the parton processes qq,gg{yields}tbH{sup {+-}} and present results for total cross sections and differential distributions. The QCD corrections reduce the renormalization and factorization scale dependence and thus stabilize the theoretical predictions. We present a comparison of the next-to-leading-order results for the inclusive cross section with a calculation based on bottom-gluon fusion gb{yields}tH{sup {+-}} and discuss the impact of the next-to-leading-order corrections on charged-Higgs searches at the LHC.

  16. Automated third generation squark production to next-to-leading order

    E-Print Network [OSTI]

    Dorival Goncalves; David Lopez-Val; Kentarou Mawatari; Tilman Plehn

    2014-07-16T23:59:59.000Z

    If light--flavor squarks and gluinos are indeed heavy and chargino pair production is plagued with overwhelming backgrounds, pair production and associated production of stops and charginos will become the key signatures in the upcoming LHC runs. We present fully automated next-to-leading order predictions for heavy flavor squark production at the LHC, including stop-chargino associated production, based on MadGolem. We compute the total and differential NLO rates for a variety of MSSM scenarios with a light third generation. We focus on theoretical uncertainties on differential rates, including a comparison to multi-jet merging and the impact of bottom parton densities for stop-chargino associated production. We find that for the associated production channel the rates can reach tens of femtobarns, but the scale dependence does not provide a conservative estimate of the theoretical uncertainties.

  17. Next-to-leading order slepton pair production at hadron colliders

    E-Print Network [OSTI]

    Howard Baer; B. W. Harris; Mary Hall Reno

    1997-12-09T23:59:59.000Z

    We compute total cross sections for various slepton pair production reactions in next-to-leading order QCD. For pbarp collisions at root S=2TeV, we find leading order cross sections to be enhanced by typically 35% to 40%. For pp collisions at root S=14TeV, the enhancement ranges from 25% to 35% depending on the mass of the sleptons. We comment upon the phenomenological implications of these results.

  18. UNDERGROUNG PLACEMENT OF COAL PROCESSING WASTE AND COAL COMBUSTION BY-PRODUCTS BASED PASTE BACKFILL FOR ENHANCED MINING ECONOMICS

    SciTech Connect (OSTI)

    Y.P. Chugh; D. Biswas; D. Deb

    2002-06-01T23:59:59.000Z

    This project has successfully demonstrated that the extraction ratio in a room-and-pillar panel at an Illinois mine can be increased from the current value of approximately 56% to about 64%, with backfilling done from the surface upon completion of all mining activities. This was achieved without significant ground control problems due to the increased extraction ratio. The mined-out areas were backfilled from the surface with gob, coal combustion by-products (CCBs), and fine coal processing waste (FCPW)-based paste backfill containing 65%-70% solids to minimize short-term and long-term surface deformations risk. This concept has the potential to increase mine productivity, reduce mining costs, manage large volumes of CCBs beneficially, and improve the miner's health, safety, and environment. Two injection holes were drilled over the demonstration panel to inject the paste backfill. Backfilling was started on August 11, 1999 through the first borehole. About 9,293 tons of paste backfill were injected through this borehole with a maximum flow distance of 300-ft underground. On September 27, 2000, backfilling operation was resumed through the second borehole with a mixture of F ash and FBC ash. A high-speed auger mixer (new technology) was used to mix solids with water. About 6,000 tons of paste backfill were injected underground through this hole. Underground backfilling using the ''Groutnet'' flow model was simulated. Studies indicate that grout flow over 300-foot distance is possible. Approximately 13,000 tons of grout may be pumped through a single hole. The effect of backfilling on the stability of the mine workings was analyzed using SIUPANEL.3D computer program and further verified using finite element analysis techniques. Stiffness of the backfill mix is most critical for enhancing the stability of mine workings. Mine openings do not have to be completely backfilled to enhance their stability. Backfill height of about 50% of the seam height is adequate to minimize surface deformations. Freeman United Coal Company performed engineering economic evaluation studies for commercialization. They found that the costs for underground management at the Crown III mine would be slightly higher than surface management at this time. The developed technologies have commercial potential but each site must be analyzed on its merit. The Company maintains significant interest in commercializing the technology.

  19. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    SciTech Connect (OSTI)

    J. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2004-06-04T23:59:59.000Z

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. In this quarterly report, we present a preliminary comparison of the carbon sequestration potential of forests growing on 14 mined sites in a seven-state region in the Midwestern and Eastern Coalfields. Carbon contents of these forests were compared to adjacent forests on non-mined land. The study was installed as a 3 x 3 factorial in a random complete block design with three replications at each location. The treatments include three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots requires 4.5 acres, and the complete installation at each site requires 13.5 acres. The plots at all three locations have been installed and the plot corners marked with PVC stakes. GPS coordinates of each plot have been collected. Soil samples were collected from each plot to characterize the sites prior to treatment. Analysis of soil samples was completed and these data are being used to prepare fertilizer prescriptions. Fertilizer prescripts will be developed for each site. Fertilizer will be applied during the second quarter 2004. Data are included as appendices in this report. As part of our economic analysis of mined land reforestation, we focused on the implications of a shift in reforestation burden from the landowner to the mine operator. Results suggest that the reforestation of mined lands as part of the mining operation creates a viable and profitable forest enterprise for landowners with greater potential for carbon sequestration.

  20. (Data in thousand metric tons of copper content, unless otherwise noted) Domestic Production and Use: Domestic mine production, which had remained unchanged in 1995, resumed the

    E-Print Network [OSTI]

    recovered from scrap, copper smelters and refiners recovered 26%; ingot makers, 10%; brass mills, 5752 COPPER (Data in thousand metric tons of copper content, unless otherwise noted) Domestic% of domestic production; copper was also recovered at mines in six other States. While copper was recovered

  1. Open charm production in deep inelastic scattering at next-to-leading order at HERA

    E-Print Network [OSTI]

    B. W. Harris

    1999-09-09T23:59:59.000Z

    An introduction and overview of charm production in deep inelastic scattering at HERA is given. The existing next-to-leading order perturbative QCD calculations are then reviewed, and key results are summarized. Finally, comparisons are made with the most recent HERA data, and unresolved issues are highlighted.

  2. Observation of Z production in proton-lead collisions at LHCb

    E-Print Network [OSTI]

    Counts, Ian Thomas Hunt

    The first observation of Z boson production in proton-lead collisions at a centre-of-mass energy per proton-nucleon pair of ?sNN = 5 TeV is presented. The data sample corresponds to an integrated luminosity of 1.6 ...

  3. Measurement of Leading Neutron Production in Deep-Inelastic Scattering at HERA

    E-Print Network [OSTI]

    H1 Collaboration

    2010-01-04T23:59:59.000Z

    The production of leading neutrons, where the neutron carries a large fraction x_L of the incoming proton's longitudinal momentum, is studied in deep-inelastic positron-proton scattering at HERA. The data were taken with the H1 detector in the years 2006 and 2007 and correspond to an integrated luminosity of 122 pb^{-1}. The semi-inclusive cross section is measured in the phase space defined by the photon virtuality 6 neutron transverse momentum p_T neutron structure function, F_2^{LN(3)}(Q^2,x,x_L), and the fraction of deep-inelastic scattering events containing a leading neutron are studied as a function of Q^2, x and x_L. Assuming that the pion exchange mechanism dominates leading neutron production, the data provide constraints on the shape of the pion structure function.

  4. Automized squark-neutralino production to next-to-leading order

    SciTech Connect (OSTI)

    Binoth, Thomas; Wigmore, Ioan [SUPA, School of Physics and Astronomy, University of Edinburgh (United Kingdom); Netto, Dorival Goncalves; Lopez-Val, David; Plehn, Tilman [Institut fuer Theoretische Physik, Universitaet Heidelberg (Germany); Mawatari, Kentarou [Theoretische Natuurkunde and IIHE/ELEM, Vrije Universiteit, Brussels (Belgium); International Solvay Institutes, Brussels (Belgium)

    2011-10-01T23:59:59.000Z

    The production of one hard jet in association with missing transverse energy is a major LHC search channel motivated by many scenarios for physics beyond the standard model. In scenarios with a weakly interacting dark matter candidate, like supersymmetry, it arises from the associated production of a quark partner with the dark matter agent. We present the next-to-leading-order cross section calculation as the first application of the fully automized MadGolem package. We find moderate corrections to the production rate with a strongly reduced theory uncertainty.

  5. Proceedings of the sixteenth international symposium on mine planning and equipment selection (MPES 2007) and the tenth international symposium on environmental issues and waste management in energy and mineral production (SWEMP 2007)

    SciTech Connect (OSTI)

    Singhal, R.K.; Fytas, K.; Jongsiri, S.; Ge, Hao (eds.) [Universite Laval, Quebec, PQ (Canada)

    2007-07-01T23:59:59.000Z

    Papers presented at MPES 2007 covered: coal mining and clean coal processing technologies; control, design and planning of surface and underground mines; drilling, blasting and excavation engineering; mining equipment selection; automation and information technology; maintenance and production management for mines and mining systems; health, safety and environment; cost effective methods of mine reclamation; mine closure and waste disposal; and rock mechanics and geotechnical issues. Papers from SWEMP 2007 discussed methods and technologies for assessing, minimizing and preventing environmental problems associated with mineral and energy production. Topics included environmental impacts of coal-fired power projects; emission control in thermal power plants; greenhouse gas abatement technologies; remediation of contaminated soil and groundwater; environmental issues in surface and underground mining of coal, minerals and ores; managing mine waste and mine water; and control of effluents from mineral processing, metallurgical and chemical plants.

  6. (Data in metric tons of contained tin, unless otherwise noted) Domestic Production and Use: In 1998, there was no domestic tin mine production. Production of tin at the only U.S.

    E-Print Network [OSTI]

    180 TIN (Data in metric tons of contained tin, unless otherwise noted) Domestic Production and Use: In 1998, there was no domestic tin mine production. Production of tin at the only U.S. tin smelter, at Texas City, TX, stopped in 1989. Twenty-five firms consumed about 85% of the primary tin. The major uses

  7. (Data in metric tons of contained tin, unless otherwise noted) Domestic Production and Use: In 1997, there was no domestic tin mine production. Production of tin at the only

    E-Print Network [OSTI]

    178 TIN (Data in metric tons of contained tin, unless otherwise noted) Domestic Production and Use: In 1997, there was no domestic tin mine production. Production of tin at the only U.S. tin smelter, at Texas City, TX, stopped in 1989. Twenty-five firms consumed about 85% of the primary tin. The major uses

  8. (Data in metric tons of contained tin, unless otherwise noted) Domestic Production and Use: In 1999, there was no domestic tin mine production. Production of tin at the only

    E-Print Network [OSTI]

    176 TIN (Data in metric tons of contained tin, unless otherwise noted) Domestic Production and Use: In 1999, there was no domestic tin mine production. Production of tin at the only U.S. tin smelter, at Texas City, TX, stopped in 1989. Twenty-five firms consumed about 97% of the primary tin. The major uses

  9. (Data in metric tons of contained tin, unless otherwise noted) Domestic Production and Use: In 1996, there was no domestic tin mine production. Production of tin at the only U.S.

    E-Print Network [OSTI]

    178 TIN (Data in metric tons of contained tin, unless otherwise noted) Domestic Production and Use: In 1996, there was no domestic tin mine production. Production of tin at the only U.S. tin smelter, at Texas City, TX, stopped in 1989. Twenty-five firms consumed about 85% of the primary tin. The major uses

  10. XAFS determination of the chemical form of lead in smelter-contaminated soils and mine tailings: Importance of adsorption processes

    SciTech Connect (OSTI)

    Morin, G.; Juillot, F.; Ildefonse, P.; Calas, G. [Univ. de Paris 6 et 7 (France). Lab. de Mineralogie-Cristallographie; Ostergren, J.D. [Stanford Univ., CA (United States). Dept. of Geological and Environmental Sciences; Brown, G.E. Jr. [Stanford Univ., CA (United States). Dept. of Geological and Environmental Sciences]|[Stanford Synchrotron Radiation Lab., CA (United States)

    1999-03-01T23:59:59.000Z

    The authors investigated smelter-contaminated soils from Evin-Malmaison, Nord-Pas-de-Calais, France, and mine tailings from Leadville, Colorado, U.S.A. Bulk Pb concentrations range from 460 to 1900 ppm in the topsoils at Evin-Malmaison site and from 6000 to 10,000 ppm in the tailings samples from the Leadville site. These concentrations necessarily raise human health and environmental concerns, but bioavailability and chemical lability of Pb in these materials vary dramatically and show little correlation with bulk concentrations. This study provides detailed information on the speciation of Pb in these materials. Emphasis is on the identification and characterization of poorly crystalline and/or fine-grained species, such as sorption complexes and poorly crystalline (co)precipitates, which are likely to control Pb bioavailability and mobility in these natural systems. In the Evin-Malmaison samples, direct spectroscopic evidence for Pb sorbed to humic acids was found, as well as to both manganese and iron (oxyhydr)oxides. In the Leadville samples, variations in Pb speciation with pH are consistent with predictions based on simplified model system studies of adsorption processes; specifically, the carbonate-buffered tailings with near-neutral pH contain up to 50% of total Pb as adsorption complexes on iron (oxyhydr)oxides, whereas Pb speciation in sulfide-rich low pH samples is dominated by Pb-bearing jarosites with no evidence for adsorbed Pb in these latter samples.

  11. abandoned mined lands: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mines Using Coal Combustion By-Products Engineering Websites Summary: subject headings: Remedial action; Acid mine water; Mines; Coals; Recycling; Maryland; Fly ashRemediation of...

  12. abandoned mined land: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mines Using Coal Combustion By-Products Engineering Websites Summary: subject headings: Remedial action; Acid mine water; Mines; Coals; Recycling; Maryland; Fly ashRemediation of...

  13. abandoned mining land: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mines Using Coal Combustion By-Products Engineering Websites Summary: subject headings: Remedial action; Acid mine water; Mines; Coals; Recycling; Maryland; Fly ashRemediation of...

  14. advance mining: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mines Using Coal Combustion By-Products Engineering Websites Summary: subject headings: Remedial action; Acid mine water; Mines; Coals; Recycling; Maryland; Fly ashRemediation of...

  15. Measurement of Leading Neutron Production in Deep-Inelastic Scattering at HERA

    E-Print Network [OSTI]

    Aaron, F D; Alimujiang, K; Andreev, V; Antunovic, B; Backovic, S; Baghdasaryan, A; Barrelet, E; Bartel, W; Begzsuren, K; Belousov, A; Bizot, J C; Boudry, V; Bozovic-Jelisavcic, I; Bracinik, J; Brandt, G; Brinkmann, M; Brisson, V; Bruncko, D; Bunyatyan, A; Buschhorn, G; Bystritskaya, L; Campbell, A J; Cantun Avila, K B; Cerny, K; Cerny, V; Chekelian, V; Cholewa, A; Contreras, J G; Coughlan, J A; Cozzika, G; Cvach, J; Dainton, J B; Daum, K; Deak, M; Delcourt, B; Delvax, J; De Wolf, E A; Diaconu, C; Dodonov, V; Dossanov, A; Dubak, A; Eckerlin, G; Efremenko, V; Egli, S; Eliseev, A; Elsen, E; Falkiewicz, A; Favart, L; Fedotov, A; Felst, R; Feltesse, J; Ferencei, J; Fischer, D.-J; Fleischer, M; Fomenko, A; Gabathuler, E; Gayler, J; Ghazaryan, Samvel; Glazov, A; Glushkov, I; Goerlich, L; Gogitidze, N; Gouzevitch, M; Grab, C; Greenshaw, T; Grell, B R; Grindhammer, G.; Habib, S; Haidt, D; Helebrant, C; Henderson, R C W; Hennekemper, E; Henschel, H; Herbst, M; Herrera, G; Hildebrandt, M; Hiller, K H; Hoffmann, D; Horisberger, R; Hreus, T; Jacquet, M; Janssen, X; Jonsson, L; Jung, Andreas Werner; INSPIRE-00183962; Jung, H; Kapichine, M; Katzy, J; Kenyon, I R; Kiesling, C; Klein, M; Kleinwort, C; Kluge, T; Knutsson, A; Kogler, R; Kostka, P; Kraemer, M; Krastev, K; Kretzschmar, J; Kropivnitskaya, A; Kruger, K; Kutak, K; Landon, M P J; Lange, W; Lastovicka-Medin, G; Laycock, P; Lebedev, A; Lendermann, V; Levonian, S; Li, G; Lipka, K; Liptaj, A; List, B; List, J; Loktionova, N; Lopez-Fernandez, R; Lubimov, V; Lytkin, L; Makankine, A; Malinovski, E; Marage, P; Marti, Ll; Martyn, H.-U.; Maxfield, S J; Mehta, A; Meyer, A B; Meyer, H; Meyer, H; Meyer, J; Mikocki, S; Milcewicz-Mika, I; Moreau, F; Morozov, A; Morris, J V; Mozer, Matthias Ulrich; Mudrinic, M; Muller, K; Murin, P; Naumann, Th; Newman, P R; Niebuhr, C; Nikiforov, A; Nikitin, D; Nowak, G; Nowak, K; Olsson, J E; Osman, S; Ozerov, D; Pahl, P; Palichik, V; Panagoulias, I; Pandurovic, M; Papadopoulou, Th; Pascaud, C; Patel, G D; Pejchal, O; Perez, E; Petrukhin, A; Picuric, I; Piec, S; Pitzl, D; Placakyte, R; Pokorny, B; Polifka, R; Povh, B; Radescu, V; Rahmat, A J; Raicevic, N; Raspiareza, A; Ravdandorj, T; Reimer, P; Rizvi, E; Robmann, P; Roland, B; Roosen, R; Rostovtsev, A; Rotaru, M; Ruiz Tabasco, J E; Rusakov, S; Salek, D; Sankey, D P C; Sauter, M; Sauvan, E; Schmitt, S; Schoeffel, L; Schoning, A; Schultz-Coulon, H.-C; Sefkow, F; Shaw-West, R N; Shtarkov, L N; Shushkevich, S; Sloan, T; Smiljanic, Ivan; Soloviev, Y; Sopicki, P; South, D; Spaskov, V; Specka, Arnd E; Staykova, Z; Steder, M; Stella, B; Stoicea, G; Straumann, U.; Sunar, D; Sykora, T; Tchoulakov, V; Thompson, G; Thompson, P D; Toll, T; Tomasz, F; Tran, T H; Traynor, D; Trinh, T N; Truol, P; Tsakov, I; Tseepeldorj, B; Turnau, J; Urban, K; Valkarova, A; Vallee, C; Van Mechelen, P; Vargas Trevino, A; Vazdik, Y; Vinokurova, S; Volchinski, V; von den Driesch, M; Wegener, D; Wissing, Ch; Wunsch, E; Zacek, J; Zalesak, J; Zhang, Z; Zhokin, A; Zimmermann, T; Zohrabyan, H; Zomer, F

    2010-01-01T23:59:59.000Z

    The production of leading neutrons, where the neutron carries a large fraction x_L of the incoming proton's longitudinal momentum, is studied in deep-inelastic positron-proton scattering at HERA. The data were taken with the H1 detector in the years 2006 and 2007 and correspond to an integrated luminosity of 122 pb^{-1}. The semi-inclusive cross section is measured in the phase space defined by the photon virtuality 6 < Q^2 < 100 GeV^2, Bjorken scaling variable 1.5x10^{-4} < x < 3x10^{-2}, longitudinal momentum fraction 0.32 < x_L < 0.95 and neutron transverse momentum p_T < 0.2 GeV. The leading neutron structure function, F_2^{LN(3)}(Q^2,x,x_L), and the fraction of deep-inelastic scattering events containing a leading neutron are studied as a function of Q^2, x and x_L. Assuming that the pion exchange mechanism dominates leading neutron production, the data provide constraints on the shape of the pion structure function.

  16. Restoring Sustainable Forests on Appalachian Mined Lands for Wood Products, Renewable Energy, Carbon Sequestration, and Other Ecosystem Services

    SciTech Connect (OSTI)

    James A. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2005-12-01T23:59:59.000Z

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in Virginia, West Virginia, Kentucky, Ohio, and Pennsylvania mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, one each in Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots is 4.5 acres, and the complete installation at each site is 13.5 acres. Regression models of chemical and physical soil properties were created in order to estimate the SOC content down the soil profile. Soil organic carbon concentration and volumetric percent of the fines decreased exponentially down the soil profile. The results indicated that one-third of the total SOC content on mined lands was found in the surface 0-13 cm soil layer, and more than two-thirds of it was located in the 0-53 cm soil profile. A relative estimate of soil density may be best in broad-scale mine soil mapping since actual D{sub b} values are often inaccurate and difficult to obtain in rocky mine soils. Carbon sequestration potential is also a function of silvicultural practices used for reforestation success. Weed control plus tillage may be the optimum treatment for hardwoods and white pine, as any increased growth resulting from fertilization may not offset the decreased survival that accompanied fertilization. Relative to carbon value, our analysis this quarter shows that although short-rotation hardwood management on reclaimed surface mined lands may have higher LEVs than traditional long-rotation hardwood management, it is only profitable in a limited set of circumstances.

  17. (Data in thousand metric tons of copper content, unless otherwise noted) Domestic Production and Use: Domestic mine production in 1997 was essentially unchanged at 1.9 million metric

    E-Print Network [OSTI]

    52 COPPER (Data in thousand metric tons of copper content, unless otherwise noted) Domestic Mexico, Nevada, and Montana, accounted for 98% of domestic production; copper was also recovered at mines in six other States. While copper was recovered at about 35 mines operating in the United States, 15

  18. Restoring Sustainable Forests on Appalachian Mined Lands for Wood Products, Renewable Energy, Carbon Sequestration, and Other Ecosystem Services

    SciTech Connect (OSTI)

    Burger, James A

    2005-07-20T23:59:59.000Z

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in Virginia, West Virginia, Kentucky, Ohio, and Pennsylvania mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, one each in Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots is 4.5 acres, and the complete installation at each site is 13.5 acres. During the reporting period we determined that by grinding the soil samples to a finer particle size of less than 250 ?m (sieve No. 60), the effect of mine soil coal particle size on the extent to which these particles will be oxidized during the thermal treatment of the carbon partitioning procedure will be eliminated, thus making the procedure more accurate and precise. In the second phase of the carbon sequestration project, we focused our attention on determining the sample size required for carbon accounting on grassland mined fields in order to achieve a desired accuracy and precision of the final soil organic carbon (SOC) estimate. A mine land site quality classification scheme was developed and some field-testing of the methods of implementation was completed. The classification model has been validated for softwoods (white pine) on several reclaimed mine sites in the southern Appalachian coal region. The classification model is a viable method for classifying post-SMCRA abandoned mined lands into productivity classes for white pine. A thinning study was established as a random complete block design to evaluate the response to thinning of a 26-year-old white pine stand growing on a reclaimed surface mine in southwest Virginia. Stand parameters were projected to age 30 using a stand table projection. Site index of the stand was found to be 32.3 m at base age 50 years. Thinning rapidly increased the diameter growth of the residual trees to 0.84 cm yr{sup -1} compared to 0.58 cm yr{sup -1} for the unthinned treatment; however, at age 26, there was no difference in volume or value per hectare. At age 30, the unthinned treatment had a volume of 457.1 m{sup 3} ha{sup -1} but was only worth $8807 ha{sup -1}, while the thinned treatment was projected to have 465.8 m{sup 3} ha{sup -1}, which was worth $11265 ha{sup -1} due to a larger percentage of the volume being in sawtimber size classes.

  19. Minijet transverse energy production in the next-to-leading order in hadron and nuclear collisions

    E-Print Network [OSTI]

    A. V. Leonidov; D. M. Ostrovsky

    1998-11-23T23:59:59.000Z

    The transverse energy flow generated by minijets in hadron and nuclear collisions into a given rapidity window in the central region is calculated in the next-to-leading (NLO) order in QCD at RHIC and LHC energies. The NLO transverse energy production in pp collisions cross sections are larger than the LO ones by the factors of K_{RHIC} ~ 1.9 and K_{LHC} ~ 2.1 at RHIC and LHC energies correspondingly. These results were then used to calculate transverse energy spectrum in nuclear collisions in a Glauber geometrical model. We show that accounting for NLO corrections in the elementary pp collisions leads to a substantial broadening of the E_{perp} distribution for the nuclear ones, while its form remains practically unchanged.

  20. Single-Spin Asymmetries in W Boson Production at Next-to-Leading Order

    E-Print Network [OSTI]

    Ringer, Felix

    2015-01-01T23:59:59.000Z

    We present an analytic next-to-leading order QCD calculation of the partonic cross sections for single-inclusive lepton production in hadronic collisions, when the lepton originates from the decay of an intermediate electroweak boson and is produced at high transverse momentum. In particular, we consider the case of incoming longitudinally polarized protons for which parity-violating single-spin asymmetries arise that are exploited in the $W$ boson program at RHIC to constrain the proton's helicity parton distributions. Our calculation enables a very fast and efficient numerical computation of the relevant spin asymmetries at RHIC, which is an important ingredient for the inclusion of RHIC data in a global analysis of nucleon helicity structure. We confirm the validity of our calculation by comparing with an existing code that treats the next-to-leading order cross sections entirely numerically by Monte-Carlo integration techniques. We also provide new comparisons of the present RHIC data with results for som...

  1. Minijet transverse energy production in the next-to-leading order in hadron and nuclear collisions

    E-Print Network [OSTI]

    Leonidov, A V

    1998-01-01T23:59:59.000Z

    The transverse energy flow generated by minijets in hadron and nuclear collisions into a given rapidity window in the central region is calculated in the next-to-leading (NLO) order in QCD at RHIC and LHC energies. The NLO transverse energy production in pp collisions cross sections are larger than the LO ones by the factors of $K_{RHIC} \\sim 1.9$ and $K_{LHC} \\sim 2.1$ at RHIC and LHC energies correspondingly. These results were then used to calculate transverse energy spectrum in nuclear collisions in a Glauber geometrical model. We show that accounting for NLO corrections in the elementary pp collisions leads to a substantial broadening of the $E_{\\perp}$ distribution for the nuclear ones, while its form remains practically unchanged.

  2. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    SciTech Connect (OSTI)

    James A. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2005-06-08T23:59:59.000Z

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in VA, WV, KY, OH, and PA mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots is 4.5 acres, and the complete installation at each site is 13.5 acres. During the reporting period we compiled and evaluated all soil properties measured on the study sites. Statistical analysis of the properties was conducted, and first year survival and growth of white pine, hybrid poplars, and native hardwoods was assessed. Hardwood species survived better at all sites than white pine or hybrid poplar. Hardwood survival across treatments was 80%, 85%, and 50% for sites in Virginia, West Virginia, and Ohio, respectively, while white pine survival was 27%, 41%, and 58%, and hybrid poplar survival was 37%, 41%, and 72% for the same sites, respectively. Hybrid poplar height and diameter growth were superior to those of the other species tested, with the height growth of this species reaching 126.6cm after one year in the most intensive treatment at the site in Virginia. To determine carbon in soils on these sites, we developed a cost-effective method for partitioning total soil carbon to pedogenic carbon and geogenic carbon in mine soils. We are in the process of evaluating the accuracy and precision of the proposed carbon partitioning technique for which we are designing an experiment with carefully constructed mine soil samples. In a second effort, as part of a mined land reforestation project for carbon sequestration in southwestern Virginia we implemented the first phase of the carbon monitoring protocol that was recently delivered to DOE.

  3. (Data in thousand metric tons of zinc content unless otherwise noted) Domestic Production and Use: The value of zinc mined in 2005, based on contained zinc recoverable from

    E-Print Network [OSTI]

    accounted for 86% of total U.S. production. Two primary and 12 large- and medium-sized secondary smelters Production: Mine, zinc in ore1 842 780 768 739 760 Primary slab zinc 203 182 187 189 250 Secondary slab zinc a major price recovery that started in the third quarter of 2004 and picked up renewed momentum

  4. Restoring Sustainable Forests on Appalachian Mined Lands for Wood Product, Renewable Energy, Carbon Sequestration, and Other Ecosystem Services

    SciTech Connect (OSTI)

    Burger, James A

    2006-09-30T23:59:59.000Z

    Concentrations of CO{sub 2} in the Earth’s atmosphere have increased dramatically in the past 100 years due to deforestation, land use change, and fossil fuel combustion. These humancaused, higher levels of CO{sub 2} may enhance the atmospheric greenhouse effect and may contribute to climate change. Many reclaimed coal-surface mine areas in the eastern U.S. are not in productive use. Reforestation of these lands could provide societal benefits, including sequestration of atmospheric carbon. The goal of this project was to determine the biological and economic feasibility of restoring high-quality forests on the tens of thousands of hectares of mined land and to measure carbon sequestration and wood production benefits that would be achieved from large-scale application of forest restoration procedures. We developed a mine soil quality model that can be used to estimate the suitability of selected mined sites for carbon sequestration projects. Across the mine soil quality gradient, we tested survival and growth performance of three species assemblages under three levels of silvicultural. Hardwood species survived well in WV and VA, and survived better than the other species used in OH, while white pine had the poorest survival of all species at all sites. Survival was particularly good for the site-specific hardwoods planted at each site. Weed control plus tillage may be the optimum treatment for hardwoods and white pine, as any increased growth resulting from fertilization may not offset the decreased survival that accompanied fertilization. Grassland to forest conversion costs may be a major contributor to the lack of reforestation of previously reclaimed mine lands in the Appalachian coal-mining region. Otherwise profitable forestry opportunities may be precluded by these conversion costs, which for many combinations of factors (site class, forest type, timber prices, regeneration intensity, and interest rate) result in negative land expectation values. Improved technology and/or knowledge of reforestation practices in these situations may provide opportunities to reduce the costs of converting many of these sites as research continues into these practices. It also appears that in many cases substantial payments, non-revenue values, or carbon values are required to reach “profitability” under the present circumstances. It is unclear when, or in what form, markets will develop to support any of these add-on values to supplement commercial forestry revenues. However, as these markets do develop, they will only enhance the viability of forestry on reclaimed mined lands, although as we demonstrate in our analysis of carbon payments, the form of the revenue source may itself influence management, potentially mitigating some of the benefits of reforestation. For a representative mined-land resource base, reforestation of mined lands with mixed pine-hardwood species would result in an average estimated C accumulation in forms that can be harvested for use as wood products or are likely to remain in the soil C pool at ~250 Mg C ha{sup -1} over a 60 year period following reforestation. The “additionality” of this potential C sequestration was estimated considering data in scientific literature that defines C accumulation in mined-land grasslands over the long term. Given assumptions detailed in the text, these lands have the potential to sequester ~180 Mg C ha{sup -1}, a total of 53.5 x 10{sup 6} Mg C, over 60 years, an average of ~900,000 Mg C / yr, an amount equivalent to about 0.04% of projected US C emissions at the midpoint of a 60-year period (circa 2040) following assumed reforestation. Although potential sequestration quantities are not great relative to potential national needs should an energy-related C emissions offset requirement be developed at some future date, these lands are available and unused for other economically valued purposes and many possess soil and site properties that are well-suited to reforestation. Should such reforestation occur, it would also produce ancillary benefits by providing env

  5. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    SciTech Connect (OSTI)

    James A. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2004-11-29T23:59:59.000Z

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in VA, WV, KY, OH, and PA mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots requires 4.5 acres, and the complete installation at each site requires 13.5 acres. The plots at all three locations have been installed and the plot corners marked with PVC stakes. GPS coordinates of each plot have been collected. Tree survival, height and diameter were measured after the first growing season. There were significant treatment and treatment x site interactions. A STELLA{reg_sign}-based model helped us develop insight as to whether it is possible to differentiate the permanent SOC from the C contained in the labile forms of SOM. The model can be used for predicting the amount of C sequestered on mine lands, and the amount of C that is expected to reside in the mine soil for more than 1,000 years. Based on our work, it appears that substantial carbon payments to landowners would be required to reach ''profitability'' under present circumstances. However, even though the payments that we examine could generate non-negative LEVs, there is no guarantee that the payments will actually cause landowners to reforest in practice. It is landowner utility associated with forestland profitability that will be the determining factor in actual conversion--utility that likely would include cash flow timing, amenities, and even the credit position of the landowner.

  6. THE USE OF COAL COMBUSTION BY-PRODUCTS FOR IN SITU TREATMENT OF ACID MINE DRAINAGE

    SciTech Connect (OSTI)

    Geoffrey A. Canty; Jess W. Everett

    2004-09-30T23:59:59.000Z

    In 1994 a demonstration project was undertaken to investigate the effectiveness of using CCBs for the in situ treatment of acidic mine water. Actual injection of alkaline material was performed in 1997 with initial positive results; however, the amount of alkalinity added to the system was limited and resulted in short duration treatment. In 1999, a CBRC grant was awarded to further investigate the effectiveness of alkaline injection technology (AIT). Funds were released in fall 2001. In December 2001, 2500 tons of fluidized bed combustion (FBC) ash were injected into the wells used in the 1997 injection project. Post injection monitoring continued for 24 months. During this period the mine chemistry had gone through a series of chemical changes that manifested as stages or ''treatment phases.'' The mine system appeared to be in the midst of reestablishing equilibrium with the partial pressure of mine headspace. Alkalinity and pH appeared to be gradually increasing during this transition. As of December 2003, the pH and alkalinity were roughly 7.3 and 65 ppm, respectively. Metal concentrations were significantly lower than pre-injection levels, but iron and manganese concentrations appeared to be gradually increasing (roughly 30 ppm and 1.25 ppm, respectively). Aluminum, nickel, and zinc were less than pre-injection concentrations and did not appear to be increasing (roughly

  7. Long-term population, productivity, and energy use trends in the sequence of leading capitalist nations.

    SciTech Connect (OSTI)

    LePoire, D. J. (Environmental Science Division)

    2010-10-01T23:59:59.000Z

    There are many theories on why sustainable science, technology, and commerce emerged first in Western Europe rather than elsewhere. A general theory is that the geography of Europe facilitated the development of diverse and independent states and resultant competition among them. Over the past 500 years, the sequence of leading states began with Portugal and the Netherlands on the edge of continental Western Europe, then moved to the British Isles, and finally moved across the Atlantic Ocean to the United States. The transitions of leadership from one state to another occurred about every 100 years. This sequence suggests that leadership moves from smaller states to larger states (although not to the largest existing state at the time), perhaps because larger states have the flexibility to develop more complex organizational processes and adapt new technology. To explore this theory further, this paper analyzes state population data at the beginning and end of each leadership period. The data reveal an accelerating initial population sequence. Further understanding is gained from comparing the populations of the preceding and succeeding states at the time of each transition: the succeeding state's population is usually about two times larger than that of the preceding state. It is also seen that over time, the new organizational processes and technologies developed by the leading state are diffused and adapted by other states. Evidence of the effects of this diffusion should be seen in the dynamics of relative productivity and energy use (since the relative advantage of new ideas and technology can be maintained for a short period of about 100 years). This paper investigates these trends in population, trade, and resources to provide insight on possible future transitions.

  8. Management of dry gas desulfurization by-products in underground mines. Quarterly report, October 1--December 31, 1996

    SciTech Connect (OSTI)

    NONE

    1996-12-31T23:59:59.000Z

    The objective is to develop and demonstrate two technologies for the placement of coal combustion by-products in abandoned underground coal mines, and to assess the environmental impact of these technologies for the management of coal combustion by-products. The two technologies for the underground placement that will be developed and demonstrated are: (1) pneumatic placement using virtually dry coal combustion by-products, and (2) hydraulic placement using a paste mixture of combustion by-products with about 70% solids. Phase 2 of the overall program began April 1, 1996. The principal objective of Phase 2 is to develop and fabricate the equipment for both the pneumatic and hydraulic placement technologies, and to conduct a limited, small-scale shakedown test of the pneumatic and hydraulic placement equipment. The shakedown test originally was to take place on the surface, in trenches dug for the tests. However, after a thorough study it was decided, with the concurrence of DOE-METC, to drill additional injection wells and conduct the shakedown tests underground. This will allow a more thorough test of the placement equipment.

  9. (Data in metric tons of tin content, unless otherwise noted) Domestic Production and Use: Tin has not been mined domestically since 1993. Production of tin at the only U.S.

    E-Print Network [OSTI]

    176 TIN (Data in metric tons of tin content, unless otherwise noted) Domestic Production and Use: Tin has not been mined domestically since 1993. Production of tin at the only U.S. tin smelter, at Texas City, TX, stopped in 1989. Twenty-five firms used about 92% of the primary tin consumed

  10. (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined domestically since 1993. Production of tin at the only U.S.

    E-Print Network [OSTI]

    174 TIN (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined domestically since 1993. Production of tin at the only U.S. tin smelter, at Texas City, TX, stopped in 1989. Twenty-five firms used about 80% of the primary tin consumed

  11. (Data in metric tons of tin content, unless otherwise noted) Domestic Production and Use: Tin has not been mined domestically since 1993. Production of tin at the only U.S.

    E-Print Network [OSTI]

    174 TIN (Data in metric tons of tin content, unless otherwise noted) Domestic Production and Use: Tin has not been mined domestically since 1993. Production of tin at the only U.S. tin smelter, at Texas City, TX, stopped in 1989. Twenty-five firms used about 77% of the primary tin consumed

  12. (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: U.S. mine production of copper in 2012 increased by 4% to about 1.15 million tons,

    E-Print Network [OSTI]

    %; and copper smelters and refiners, 5%. Copper in all old and new, refined or remelted scrap contributed about48 COPPER (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: U.S. mine production of copper in 2012 increased by 4% to about 1.15 million tons

  13. (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: U.S. mine production of copper in 2011 increased slightly to about 1.1 million tons

    E-Print Network [OSTI]

    %; and copper smelters and refiners, 5%. Copper in all old and new, refined or remelted scrap contributed about48 COPPER (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: U.S. mine production of copper in 2011 increased slightly to about 1.1 million tons

  14. (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: U.S. mine production of copper in 2013 increased by 4% to about 1.22 million tons,

    E-Print Network [OSTI]

    manufacturers, foundries, and chemical plants, 11%; ingot makers,10%; and copper smelters and refiners, 548 COPPER (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: U.S. mine production of copper in 2013 increased by 4% to about 1.22 million tons

  15. (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: Domestic mine production of copper in 2010 declined by about 5% to 1.12 million

    E-Print Network [OSTI]

    plants, 14%; ingot makers, 11%; and copper smelters and refiners, 5%. Copper in all old and new, refined48 COPPER (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: Domestic mine production of copper in 2010 declined by about 5% to 1.12 million tons

  16. (Data in metric tons of lithium content unless otherwise noted) Domestic Production and Use: The only commercially active lithium mine operating in the United States was a

    E-Print Network [OSTI]

    94 LITHIUM (Data in metric tons of lithium content unless otherwise noted) Domestic Production and Use: The only commercially active lithium mine operating in the United States was a brine operation in Nevada. Two companies produced a large array of downstream lithium compounds in the United States from

  17. By Daniel L. Edelstein Mine production of recoverable copper in the United States United States retained its position as both the largest producer

    E-Print Network [OSTI]

    , copper availability remained tight and average annual smelter and an electrolytic refinery in Michigan1 COPPER By Daniel L. Edelstein Mine production of recoverable copper in the United States United-high level of 1.85 and consumer of refined copper, accounting for 19% and 22%, million metric tons

  18. (Data in metric tons of tungsten content, unless noted) Domestic Production and Use: In 1995, one mine in California produced tungsten concentrate. The mine operated

    E-Print Network [OSTI]

    , concentrate 21 38 63 44 -- Government stockpile shipments, concentrate -- -- -- -- -- Consumption: Reported and equipment, 77%; electrical and electronic machinery and equipment and transportation, 10%; lamps, mine shipments W W W W W Imports for consumption, concentrate 7,800 2,500 1,700 3,000 5,500 Exports

  19. Management of dry flue gas desulfurization by-products in underground mines. Topical report, April 1, 1996--April 30, 1997

    SciTech Connect (OSTI)

    Chugh, Y.P.; Brackebusch, F.; Carpenter, J. [and others

    1998-12-31T23:59:59.000Z

    This report represents the Final Technical Progress Report for Phase II of the overall program for a cooperative research agreement between the U.S. Department of Energy - MORGANTOWN Energy Technology Center (DOE-METC) and Southern Illinois University at Carbondale (SIUC). Under the agreement, SIUC will develop and demonstrate technologies for the handling, transport, and placement in abandoned underground coal mines of dry flue gas desulfurization by-products, such as fly ash, scrubber sludge, fluidized bed combustion by-products, and will assess the environmental impact of such underground placement. The overall program is divided into three (3) phases. Phase II of the program is primarily concerned with developing and testing the hardware for the actual underground placement demonstrations. Two technologies have been identified and hardware procured for full-scale demonstrations: (1) hydraulic placement, where coal combustion by-products (CCBs) will be placed underground as a past-like mixture containing about 70 to 75 percent solids; and (2) pneumatic placement, where CCBs will be placed underground as a relatively dry material using compressed air. 42 refs., 36 figs., 36 tabs.

  20. Charmonium production in proton-proton collisions and in collisions of lead nuclei at CERN and comparison with Brookhaven data

    SciTech Connect (OSTI)

    Topilskaya, N. S., E-mail: topilska@inr.ru [Russian Academy of Sciences, Institute for Nuclear Research (Russian Federation)

    2013-10-15T23:59:59.000Z

    A review of experimental data on charmoniumproduction that were obtained in fixed-target experiments at the SPS synchrotron and in proton-proton collisions and in collisions of lead nuclei in beams of the Large Hadron Collider (LHC) at CERN (Switzerland) is presented. A comparison with data obtained at the Brookhaven National Laboratory (USA) from experiments at the Relativistic Heavy Ion Collider (RHIC) is performed. Measurement of the suppression of J/{psi}-meson production as a possible signal of the production of quark-gluon plasmawas proposed back in 1986 by T. Matsui and H. Satz. An anomalous suppression of J/{psi}-meson production was discovered by the NA50 Collaboration at SPS (CERN) in central collisions of lead nuclei at the c.m. collision energy of 158 GeV per nucleon. Data obtained at the c.m. energy of 200 GeV per nucleon in the PHENIX experiment at RHIC indicate that, depending on multiplicity, the suppression of J/{psi}-meson production at this energy approximately corresponds to the suppression of J/{psi}-meson production in collisions of lead nuclei at the SPS accelerator. Theoretical models that take into account the regeneration of J/{psi} mesons describe better RHIC experimental data. The measurement of charmonium production in proton-proton collisions and in collisions of lead nuclei in LHC beams revealed the importance of taking into account the regeneration process. At the LHC energies, it is also necessary to take into account the contribution of B-meson decays. Future measurements of charmonium production at the LHC to a higher statistical precision and over an extended energy region would be of importance for obtaining deeper insight into the mechanism of charmonium production and for studying the properties of matter at high energy density and temperature.

  1. Mines and Mining (Maryland)

    Broader source: Energy.gov [DOE]

    It is the policy of the state to encourage the development of mined resources in Maryland while protecting the environment and public health and safety. This legislation establishes the Bureau of...

  2. Spatial patterns of cadmium and lead deposition on and adjacent to National Park Service lands in the vicinity of Red Dog Mine, Alaska

    SciTech Connect (OSTI)

    Hasselbach, L; Ver Hoef, J M.; Ford, Jesse; Neitlich, P; Crecelius, Eric A.; Berryman, Shanti D.; Wolk, B; Boehle, T

    2005-04-26T23:59:59.000Z

    Heavy metal escapement associated with ore trucks is known to affect the DeLong Mountain Regional Transportation System (DMTS) haul road corridor in Cape Krusenstern National Monument, northwest Alaska. Tissue concentrations in Hylocomium splendens moss (n = 226) were used to determine the extent and pattern of airborne heavy metal deposition on Monument lands. A stratified grid-based sample design was used with more intensive sampling near mining-related activities. Spatial predictions using geostatistical models were employed to produce maps of depositional patterns, and to estimate the geographic area affected above various thresholds. Spatial regression analyses indicated that heavy metal deposition decreased with the log of distance from the DMTS haul road and the DMTS port site. Analysis of subsurface soil demonstrated that observed patterns of heavy metal deposition reflected in moss tissue concentrations were not attributable to local subsurface lithology. Based on comparisons with regional background data from arctic Alaska, deposition of airborne heavy metals related to mining activities appears to affect the northern half of the Monument. The affected area extends northward (beyond Monument boundaries) through the Kisimilot/Iyikrok hills (north of the Wulik River), and possibly beyond. South of the DMTS haul road, airborne deposition appears to be constrained by the Tahinichok Mountains. Moss tissue concentrations were highest immediately adjacent to the DMTS haul road (Cd > 24 mg/kg dw; Pb > 900 mg/kg dw). The influence of the mine site was not studied.

  3. Management of dry flue gas desulfurization by-products in underground mines. Annual report, October 1993--September 1994

    SciTech Connect (OSTI)

    Chugh, Y.P.; Dutta, D.; Esling, S.; Ghafoori, N.; Paul, B.; Sevim, H.; Thomasson, E.

    1994-10-01T23:59:59.000Z

    Preliminary environmental risk assessment on the FGD by-products to be placed underground is virtually complete. The initial mixes for pneumatic and hydraulic placement have been selected and are being subject to TCLP, ASTM, and modified SLP shake tests as well as ASTM column leaching. Results of these analyses show that the individual coal combustion residues, and the residues mixes, are non-hazardous in character. Based on available information, including well logs obtained from Peabody Coal Company, a detailed study of the geology of the placement site was completed. The study shows that the disposal site in the abandoned underground mine workings at depths of between 325 and 375 feet are well below potable groundwater resources. This, coupled with the benign nature of the residues and residues mixtures, should alleviate any concern that the underground placement will have adverse effects on groundwater resources. Seven convergence stations were installed in the proposed underground placement area of the Peabody Coal Company No. 10 mine. Several sets of convergence data were obtained from the stations. A study of materials handling and transportation of coal combustion residues from the electric power plant to the injection site has been made. The study evaluated the economics of the transportation of coal combustion residues by pneumatic trucks, by pressure differential rail cars, and by SEEC, Inc. collapsible intermodal containers (CICs) for different annual handling rates and transport distances. The preliminary physico-chemical characteristics and engineering properties of various FBC fly ash-spent bed mixes have been determined, and long-term studies of these properties are continuing.

  4. 2008 Underground/Longwall Mining Buyer's Guide

    SciTech Connect (OSTI)

    NONE

    2008-06-15T23:59:59.000Z

    The guide lists US companies supplying equipment and services to mines. An index by product category is included.

  5. 2009 underground/longwall mining buyer's guide

    SciTech Connect (OSTI)

    NONE

    2009-06-15T23:59:59.000Z

    The guide lists US companies supplying equipment and services to underground mining operations. An index by product category is included.

  6. (Data in metric tons of yttrium oxide (Y2O3) content, unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was mined as a constituent of the mineral bastnasite,

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was mined as a constituent of the mineral bastnasite, but was not recovered as a separate element during processing. Bastnasite, a rare-earth fluocarbonate mineral, was mined and concentrates (monazite) 2612.20.0000 Free. Rare-earth metals, scandium and yttrium, whether or not intermixed

  7. (Data in metric tons of yttrium oxide (Y2O3) content, unless otherwise noted) Domestic Production and Use: The rare-earth element, yttrium, was mined as a constituent of the mineral

    E-Print Network [OSTI]

    Production and Use: The rare-earth element, yttrium, was mined as a constituent of the mineral bastnasite, but was not recovered as a separate element during processing. Bastnasite, a rare-earth fluocarbonate mineral, was mined.20.0000 Free. Rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed 2805.30.0000 5

  8. Lead Section Grower Four Star Greenhouse has been producing high quality garden products since

    E-Print Network [OSTI]

    products since 1977 and is the largest partner/supplier of the nationally recognized Greenhouse's Mission Statement in all job related functions. Minimum Qualifications: 1

  9. Management of dry flue gas desulfurization by-products in underground mines. Quarterly report, August 1--October 31, 1997

    SciTech Connect (OSTI)

    Chugh, Y.P.

    1997-12-31T23:59:59.000Z

    The objective of this project was to develop and demonstrate two technologies for the placement of coal combustion by-products in abandoned underground coal mines, and to assess the environmental impact of these technologies for the management of CCB materials. The two technologies for the underground placement that were to be developed and demonstrated are: (1) pneumatic placement using virtually dry CCB products, and (2) hydraulic placement using a paste mixture of CCB products with about 70% solids. The period covered by this report is the second quarter of Phase 3 of the overall program. During this period over 8,000 tons of CCB mixtures was injected using the hydraulic paste technology. This amount of material virtually filled the underground opening around the injection well, and was deemed sufficient to demonstrate fully the hydraulic injection technology. By the end of this quarter about 2,000 tons of fly ash had been placed underground using the pneumatic placement technology. While the rate of injection of about 50 tons per hour met design criteria, problems were experienced in the delivery of fly ash to the pneumatic demonstration site. The source of the fly ash, the Archer Daniels Midland Company power plant at Decatur, Illinois is some distance from the demonstration site, and often sufficient tanker trucks are not available to haul enough fly ash to fully load the injection equipment. Further, on some occasions fly ash from the plant was not available. The injection well was plugged three times during the demonstration. This typically occurred due to cementation of the FBC ash in contact with water. After considerable deliberations and in consultation with the technical project officer, it was decided to stop further injection of CCB`s underground using the developed pneumatic technology.

  10. (Data in thousand metric tons of copper content, unless otherwise noted) Domestic Production and Use: Domestic mine production in 2002 declined to 1.13 million metric tons and was

    E-Print Network [OSTI]

    - and nickel-base scrap), brass mills recovered 70%; copper smelters and refiners, 8%; ingot makers, 1156 COPPER (Data in thousand metric tons of copper content, unless otherwise noted) Domestic, accounted for 99% of domestic production; copper was also recovered at mines in three other States. Although

  11. (Data in thousand metric tons of copper content, unless otherwise noted) Domestic Production and Use: Domestic mine production in 2000 declined to 1.45 million metric tons and was

    E-Print Network [OSTI]

    scrap, brass mills recovered 67%; copper smelters and refiners,18%; ingot makers, 11%; and miscellaneous52 COPPER (Data in thousand metric tons of copper content, unless otherwise noted) Domestic, and Montana, accounted for 99% of domestic production; copper was also recovered at mines in three other

  12. (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: Domestic mine production in 2004 rose to 1.16 million tons and was valued at

    E-Print Network [OSTI]

    scrap (including aluminum- and nickel-base scrap), brass mills recovered 71%; copper smelters54 COPPER (Data in thousand metric tons of copper content unless otherwise noted) Domestic% of domestic production; copper was also recovered at mines in four other States. Although copper was recovered

  13. (Data in thousand metric tons of copper content, unless otherwise noted) Domestic Production and Use: Domestic mine production in 2001 declined to 1.34 million metric tons and was

    E-Print Network [OSTI]

    scrap (including aluminum- and nickel-base scrap), brass mills recovered 65%; copper smelters54 COPPER (Data in thousand metric tons of copper content, unless otherwise noted) Domestic, accounted for 99% of domestic production; copper was also recovered at mines in three other States. Although

  14. (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: Domestic mine production in 2006 rose to more than 1.2 million tons and was

    E-Print Network [OSTI]

    manufacturers, foundries, and chemical plants, 12%; ingot makers, 10%; and copper smelters and refiners, 452 COPPER (Data in thousand metric tons of copper content unless otherwise noted) Domestic Mexico, Nevada, and Montana--accounted for 99% of domestic production; copper was also recovered at mines

  15. (Data in thousand metric tons of copper content, unless otherwise noted) Domestic Production and Use: Domestic mine production in 1999 declined to 1.66 million metric tons and was

    E-Print Network [OSTI]

    mills. Of the total copper recovered from scrap, brass mills recovered 67%; copper smelters and refiners56 COPPER (Data in thousand metric tons of copper content, unless otherwise noted) Domestic, Nevada, and Montana, accounted for 99% of domestic production; copper was also recovered at mines

  16. (Data in thousand metric tons of copper content, unless otherwise noted) Domestic Production and Use: Domestic mine production in 2003 declined to 1.12 million tons and was valued at

    E-Print Network [OSTI]

    - and nickel-base scrap), brass mills recovered 70%; copper smelters and refiners, 6%; ingot makers, 1254 COPPER (Data in thousand metric tons of copper content, unless otherwise noted) Domestic% of domestic production; copper was also recovered at mines in three other States. Although copper

  17. (Data in thousand metric tons of copper content, unless otherwise noted) Domestic Production and Use: Domestic mine production in 1998 declined to 1.85 million metric tons and was

    E-Print Network [OSTI]

    , copper smelters and refiners recovered 23%; ingot makers, 10%; brass mills, 63%; and miscellaneous56 COPPER (Data in thousand metric tons of copper content, unless otherwise noted) Domestic, Nevada, and Montana, accounted for 99% of domestic production; copper was also recovered at mines

  18. (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: Domestic mine production in 2005 fell nominally to 1.15 million tons and was

    E-Print Network [OSTI]

    (including aluminum- and nickel-base scrap), brass mills recovered 73%; copper smelters and refiners, 556 COPPER (Data in thousand metric tons of copper content unless otherwise noted) Domestic Mexico, Nevada, and Montana, accounted for 99% of domestic production; copper was also recovered at mines

  19. LONG-AND SHORT-TERM PRODUCTION SCHEDULING AT LKAB'S KIRUNA MINE

    E-Print Network [OSTI]

    in the manufacture of steel end-products. For about half a century, iron ore at Kiruna was extracted exclusively via or two 25-ton-capacity electric Load Haul Dump Units (LHDs) operating on a sublevel within each to prevent LHD drivers from driving over and damaging LHD cables. The site on which each LHD operates is also

  20. Forecasting, Sensitivity and Economic Analysis of Hydrocarbon Production from Shale Plays Using Artificial Intelligence & Data Mining

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    SPE 162700 Forecasting, Sensitivity and Economic Analysis of Hydrocarbon Production from Shale-cluster, multi-stage hydraulic fractures, that have proven to be essential for economic recovery from Shale plays, sensitivity and economic analysis are performed in order to identify the impact of different reservoir

  1. MINING PROCESS AND PRODUCT INFORMATION FROM PRESSURE FLUCTUATIONS WITHIN A FUEL PARTICLE COATER

    SciTech Connect (OSTI)

    Douglas W. Marshall; Charles M. Barnes

    2008-09-01T23:59:59.000Z

    The Next Generation Nuclear Power (NGNP) Fuel Development and Qualification Program included the design, installation, and testing of a 6-inch diameter nuclear fuel particle coater to demonstrate quality TRISO fuel production on a small industrial scale. Scale-up from the laboratory-scale coater faced challenges associated with an increase in the kernel charge mass, kernel diameter, and a redesign of the gas distributor to achieve adequate fluidization throughout the deposition of the four TRISO coating layers. TRISO coatings are applied at very high temperatures in atmospheres of dense particulate clouds, corrosive gases, and hydrogen concentrations over 45% by volume. The severe environment, stringent product and process requirements, and the fragility of partially-formed coatings limit the insertion of probes or instruments into the coater vessel during operation. Pressure instrumentation were installed on the gas inlet line and exhaust line of the 6-inch coater to monitor the bed differential pressure and internal pressure fluctuations emanating from the fuel bed as a result of bed and gas “bubble” movement. These instruments are external to the particle bed and provide a glimpse into the dynamics of fuel particle bed during the coating process and data that could be used to help ascertain the adequacy of fluidization and, potentially, the dominant fluidization regimes. Pressure fluctuation and differential pressure data are not presently useful as process control instruments, but data suggest a link between the pressure signal structure and some measurable product attributes that could be exploited to get an early estimate of the attribute values.

  2. Next-to-Leading-Order QCD Corrections to W{sup +}W{sup -}bb Production at Hadron Colliders

    SciTech Connect (OSTI)

    Denner, A. [Institut fuer Theoretische Physik und Astrophysik, Universitaet Wuerzburg, 97074 Wuerzburg (Germany); Dittmaier, S. [Physikalisches Institut, Albert-Ludwigs-Universitaet Freiburg, 79104 Freiburg (Germany); Kallweit, S. [Paul Scherrer Institut, Wuerenlingen und Villigen, 5232 Villigen PSI (Switzerland); Pozzorini, S. [Institut fuer Theoretische Physik, Universitaet Zuerich, 8057 Zuerich (Switzerland)

    2011-02-04T23:59:59.000Z

    Top-antitop quark pairs belong to the most abundantly produced and precisely measurable heavy-particle signatures at hadron colliders and allow for crucial tests of the standard model and new physics searches. Here we report on the calculation of the next-to-leading order (NLO) QCD corrections to hadronic W{sup +}W{sup -}bb production, which provides a complete NLO description of the production of top-antitop pairs and their subsequent decay into W bosons and bottom quarks, including interferences, off-shell effects, and nonresonant backgrounds. Numerical predictions for the Tevatron and the LHC are presented.

  3. Software Escalation Prediction with Data Mining Tilmann Bruckhaus

    E-Print Network [OSTI]

    Ling, Charles X.

    Software Escalation Prediction with Data Mining Tilmann Bruckhaus Customer Network Services Sun (EP) is to avoid such escalations from known product defects using data mining technology [1, 2 is then augmented within the SPSS Clementine data-mining

  4. The production of dense lead-ion beams for the CERN LHC

    E-Print Network [OSTI]

    Bosser, Jacques; Chanel, M; MacCaferri, R; Molinari, G; Maury, S; Möhl, D; Tranquille, G

    2000-01-01T23:59:59.000Z

    To reach the design luminosity for lead-ions in the LHC, the present Low Energy Antiproton Ring (LEAR) has to be converted into a Low Energy Ion Ring (LEIR). Since the present ECR lead-ion source does not provide sufficient intensity, the main goal of LEIR is to act as a low-energy (4.2MeV/u) accumulator where the ion beam is stacked and cooled (with the help of an electron-cooler) to reach the required intensity and emittances. An experimental program has been carried out at LEAR in recent years in order to test the cooling and stacking process with the present electron-cooler. A variety of results have been reported at previous conferences. This paper will focus on the electron cooling aspects resulting from the afore mentioned experiments. Taking into account the experience

  5. Diffractive Dijet Production with a Leading Proton in ep Collisions at HERA

    E-Print Network [OSTI]

    ,

    2015-01-01T23:59:59.000Z

    The cross section of the diffractive process e^+p -> e^+Xp is measured at a centre-of-mass energy of 318 GeV, where the system X contains at least two jets and the leading final state proton p is detected in the H1 Very Forward Proton Spectrometer. The measurement is performed in photoproduction with photon virtualities Q^2 <2 GeV^2 and in deep-inelastic scattering with 4 GeV^2leading order QCD calculations based on diffractive parton distribution functions as extracted from measurements of inclusive cross sections in diffractive deep-inelastic scattering.

  6. Automated next-to-leading order predictions for colored scalar production at the LHC

    E-Print Network [OSTI]

    Céline Degrande; Benjamin Fuks; Valentin Hirschi; Josselin Proudom; Hua-Sheng Shao

    2014-12-17T23:59:59.000Z

    We explore scenarios beyond the Standard Model where new colored scalar particles can be pair produced in hadron collisions. Using simplified models to describe the new field interactions with the Standard Model, we present precision predictions for the LHC by automatically matching next-to-leading order matrix elements with parton showers within the MadGraph5 aMC@NLO framework. We illustrate in this way, for the first time in our field, the full automation of Monte Carlo event generation at the next-to-leading order accuracy in QCD for new physics theories with an extended colored sector, the sole inputs being the model Lagrangian and the process of interest.

  7. Mining (Montana)

    Broader source: Energy.gov [DOE]

    This section provides general rules and regulations pertaining to mining practices in the state of Montana. It addresses mining locations and claims, procedures for rights-of-way and eminent domain...

  8. South Carolina Mining Act (South Carolina)

    Broader source: Energy.gov [DOE]

    The South Carolina Mining Act seeks to offer the greatest practical degree of protection and restoration to usefulness, productivity, and scenic values of all SC lands and waters involved in mining...

  9. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    SciTech Connect (OSTI)

    J. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

    2003-12-18T23:59:59.000Z

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. In this quarterly report, we present a preliminary comparison of the carbon sequestration benefits for two forest types used to convert abandoned grasslands for carbon sequestration. Annual mixed hardwood benefits, based on total stand carbon volume present at the end of a given year, range from a minimum of $0/ton of carbon to a maximum of $5.26/ton of carbon (low prices). White pine benefits based on carbon volume range from a minimum of $0/ton of carbon to a maximum of $18.61/ton of carbon (high prices). The higher maximum white pine carbon payment can primarily be attributed to the fact that the shorter rotation means that payments for white pine carbon are being made on far less cumulative carbon tonnage than for that of the long-rotation hardwoods. Therefore, the payment per ton of white pine carbon needs to be higher than that of the hardwoods in order to render the conversion to white pine profitable by the end of a rotation. These carbon payments may seem appealingly low to the incentive provider. However, payments (not discounted) made over a full rotation may add up to approximately $17,493/ha for white pine (30-year rotation), and $18,820/ha for mixed hardwoods (60-year rotation). The literature suggests a range of carbon sequestration costs, from $0/ton of carbon to $120/ton of carbon, although the majority of studies suggest a cost below $50/ ton of carbon, with van Kooten et al. (2000) suggesting a cutoff cost of $20/ton of carbon sequestered. Thus, the ranges of carbon payments estimated for this study fall well within the ranges of carbon sequestration costs estimated in previous studies.

  10. Competition of fusion and quasi-fission in the reactions leading to production of the superheavy elements

    E-Print Network [OSTI]

    M. Veselsky

    2003-02-11T23:59:59.000Z

    The mechanism of fusion hindrance, an effect observed in the reactions of cold, warm and hot fusion leading to production of the superheavy elements, is investigated. A systematics of transfermium production cross sections is used to determine fusion probabilities. Mechanism of fusion hindrance is described as a competition of fusion and quasi-fission. Available evaporation residue cross sections in the superheavy region are reproduced satisfactorily. Analysis of the measured capture cross sections is performed and a sudden disappearance of the capture cross sections is observed at low fusion probabilities. A dependence of the fusion hindrance on the asymmetry of the projectile-target system is investigated using the available data. The most promising pathways for further experiments are suggested.

  11. Carbon Sequestration on Surface Mine Lands

    SciTech Connect (OSTI)

    Donald Graves; Christopher Barton; Richard Sweigard; Richard Warner; Carmen Agouridis

    2006-03-31T23:59:59.000Z

    Since the implementation of the federal Surface Mining Control and Reclamation Act of 1977 (SMCRA) in May of 1978, many opportunities have been lost for the reforestation of surface mines in the eastern United States. Research has shown that excessive compaction of spoil material in the backfilling and grading process is the biggest impediment to the establishment of productive forests as a post-mining land use (Ashby, 1998, Burger et al., 1994, Graves et al., 2000). Stability of mine sites was a prominent concern among regulators and mine operators in the years immediately following the implementation of SMCRA. These concerns resulted in the highly compacted, flatly graded, and consequently unproductive spoils of the early post-SMCRA era. However, there is nothing in the regulations that requires mine sites to be overly compacted as long as stability is achieved. It has been cultural barriers and not regulatory barriers that have contributed to the failure of reforestation efforts under the federal law over the past 27 years. Efforts to change the perception that the federal law and regulations impede effective reforestation techniques and interfere with bond release must be implemented. Demonstration of techniques that lead to the successful reforestation of surface mines is one such method that can be used to change perceptions and protect the forest ecosystems that were indigenous to these areas prior to mining. The University of Kentucky initiated a large-scale reforestation effort to address regulatory and cultural impediments to forest reclamation in 2003. During the three years of this project 383,000 trees were planted on over 556 acres in different physiographic areas of Kentucky (Table 1, Figure 1). Species used for the project were similar to those that existed on the sites before mining was initiated (Table 2). A monitoring program was undertaken to evaluate growth and survival of the planted species as a function of spoil characteristics and reclamation practice. In addition, experiments were integrated within the reforestation effort to address specific questions pertaining to sequestration of carbon (C) on these sites.

  12. By Stephen M. Jasinski Zinc was produced at 24 mines in the United (except for Japan) and improved in Europe. (USBM) from a voluntary survey on Lode-Mine

    E-Print Network [OSTI]

    % from Zinc exports from China, Kazakhstan, North Production of Gold, Silver, Copper, Lead, and 1993 of and Colorado. U.S. mine production greatly refined zinc to reach a record high of 1,230,000 exceeded smelter stocks. Total world $619 million. stocks were 1,800,000 tons at yearend, which Three smelters produced

  13. Vector Boson Production at Hadron Colliders: A Fully Exclusive QCD Calculation at Next-to-Next-to-Leading Order

    SciTech Connect (OSTI)

    Catani, Stefano; Ferrera, Giancarlo; Grazzini, Massimiliano [INFN, Sezione di Firenze and Dipartimento di Fisica, Universita di Firenze, I-50019 Sesto Fiorentino, Florence (Italy); Cieri, Leandro; Florian, Daniel de [Departamento de Fisica, FCEYN, Universidad de Buenos Aires, (1428) Pabellon 1 Ciudad Universitaria, Capital Federal (Argentina)

    2009-08-21T23:59:59.000Z

    We consider QCD radiative corrections to the production of W and Z bosons in hadron collisions. We present a fully exclusive calculation up to next-to-next-to-leading order (NNLO) in QCD perturbation theory. To perform this NNLO computation, we use a recently proposed version of the subtraction formalism. The calculation includes the gamma-Z interference, finite-width effects, the leptonic decay of the vector bosons, and the corresponding spin correlations. Our calculation is implemented in a parton level Monte Carlo program. The program allows the user to apply arbitrary kinematical cuts on the final-state leptons and the associated jet activity and to compute the corresponding distributions in the form of bin histograms. We show selected numerical results at the Fermilab Tevatron and the LHC.

  14. The use of NTA and EDTA for lead phytoextraction from soil from a battery recycling site

    E-Print Network [OSTI]

    Freitas, Eriberto; Nascimento, Clistenes; Silva, Airon

    2009-01-01T23:59:59.000Z

    are lead mining, lead smelting and battery recycling.Areas near Pb recycling facilities may be enriched bysoil with lead. A battery recycling site is a location where

  15. Mines in the Four Corners anticipate growth

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2008-02-15T23:59:59.000Z

    Productive mines in the southwest deplete reserves, while the government drags its heels on new power projects. Production in Arizona and New Mexico has fallen 18% over the last four years to 34.1 million tons. With Chevron Mining's McKinley mine rapidly depleting its reserves the industry will continue to contract. In the last three years at least three large mines in the Four Corners have terminated operations. Three others remain captive operations: BHP Billiton's San Juan Underground and Navajo Surface operations and Peabody Energy's Kayenta surface mine. In 2006 the Black Mesa mine stopped producing coal. These four mines are isolated from the national railways. Peabody's new El Segundo surface mine near Grants, NM is increasing production. If the planned $3 billion Desert Rock coal-fired power plant is built this will present a new market for the Navajo mine. The article gives details about the state of the aforementioned mines and of the new King II coal mine on the northern periphery of the San Juan basin and discusses the state of plans for the Desert Rock Energy Project. 5 photos.

  16. (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989,

    E-Print Network [OSTI]

    170 TIN (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989, respectively. Twenty-five firms used about 90% of the primary tin consumed domestically in 2012. The major uses were as follows

  17. (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989,

    E-Print Network [OSTI]

    172 TIN (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989, respectively. Twenty-five firms used about 81% of the primary tin consumed domestically in 2006. The major uses were as follows

  18. (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989,

    E-Print Network [OSTI]

    172 TIN (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989, respectively. Twenty-five firms used about 86% of the primary tin consumed domestically in 2008. The major uses were as follows

  19. (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989,

    E-Print Network [OSTI]

    176 TIN (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989, respectively. Twenty-five firms used about 81% of the primary tin consumed domestically in 2005. The major uses were as follows

  20. (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989,

    E-Print Network [OSTI]

    170 TIN (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989, respectively. Twenty-five firms used about 84% of the primary tin consumed domestically in 2009. The major uses were as follows

  1. (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989,

    E-Print Network [OSTI]

    168 TIN (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989, respectively. Twenty-five firms accounted for about 90% of the primary tin consumed domestically in 2013. The major uses for tin

  2. (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989,

    E-Print Network [OSTI]

    170 TIN (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989, respectively. Twenty-five firms used about 91% of the primary tin consumed domestically in 2010. The major uses were as follows

  3. (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989,

    E-Print Network [OSTI]

    176 TIN (Data in metric tons of tin content unless otherwise noted) Domestic Production and Use: Tin has not been mined or smelted in the United States since 1993 and 1989, respectively. Twenty-five firms used about 84% of the primary tin consumed domestically in 2007. The major uses were as follows

  4. (Data in metric tons of yttrium oxide (Y2O3) content unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was not mined in the United States in 2007. All

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was not mined in the United States in 2007. All yttrium Number Normal Trade Relations 12-31-07 Thorium ores and concentrates (monazite) 2612.20.0000 Free. Rare-earth-bearing materials and compounds containing by weight >19% to rare-earth

  5. (Data in metric tons of yttrium oxide (Y2O3) content unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was not mined in the United States in 2009. All

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was not mined in the United States in 2009. All yttrium. Rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed 2805.30.0000 5.0% ad. Other rare-earth compounds, including yttrium oxide >85% Y2O3, yttrium nitrate, and other individual

  6. [Data in metric tons of yttrium oxide (Y2O3) content unless otherwise noted] Domestic Production and Use: The rare-earth element yttrium was not mined in the United States in 2010. All

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was not mined in the United States in 2010. All yttrium. Rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed 2805.30.0000 5.0% ad. Other rare-earth compounds, including yttrium oxide >85% Y2O3, yttrium nitrate, and other individual

  7. (Data in metric tons of yttrium oxide (Y2O3) content, unless noted) Domestic Production and Use: The rare-earth element, yttrium, was mined by one company as a constituent of the

    E-Print Network [OSTI]

    Production and Use: The rare-earth element, yttrium, was mined by one company as a constituent of the mineral bastnasite, but was not recovered as a separate element during processing. Bastnasite, a rare-earth ores and concentrates (monazite) 2612.20.0000 Free Free. Rare-earth metals, scandium and yttrium

  8. (Data in metric tons of yttrium oxide (Y2O3) content unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was not mined in the United States in 2008. All

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was not mined in the United States in 2008. All yttrium 12-31-08 Thorium ores and concentrates (monazite) 2612.20.0000 Free. Rare-earth metals, scandium and compounds containing by weight >19% to rare-earth compounds, including

  9. (Data in metric tons of yttrium oxide (Y2O3) content, unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was mined as a constituent of the mineral bastnsite

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was mined as a constituent of the mineral bastnäsite at Mountain Pass, CA, but was not recovered as a separate element during processing. Bastnäsite, a rare-earth Number Normal Trade Relations 12/31/02 Thorium ores and concentrates (monazite) 2612.20.0000 Free. Rare-earth

  10. (Data in metric tons of yttrium oxide (Y2O3) content unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was not mined in the United States in 2006. All

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was not mined in the United States in 2006. All yttrium-31-06 Thorium ores and concentrates (monazite) 2612.20.0000 Free. Rare-earth metals, scandium and yttrium and compounds containing by weight >19% to rare-earth compounds, including

  11. (Data in metric tons of yttrium oxide (Y2O3) content unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was not mined in the United States in 2010. All

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was not mined in the United States in 2010. All yttrium Normal Trade Relations 12-31-10 Thorium ores and concentrates (monazite) 2612.20.0000 Free. Rare-earth-bearing materials and compounds containing by weight >19% to rare-earth compounds

  12. (Data in metric tons of yttrium oxide (Y2O3) content, unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was not mined in the United States in 2003.

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was not mined in the United States in 2003. Yttrium Relations 12/31/03 Thorium ores and concentrates (monazite) 2612.20.0000 Free. Rare-earth metals, scandium and compounds containing by weight >19% to rare-earth compounds, including

  13. (Data in metric tons of yttrium oxide (Y O ) content, unless otherwise noted)2 3 Domestic Production and Use: The rare-earth element, yttrium, was mined by one company as a constituent of the

    E-Print Network [OSTI]

    Domestic Production and Use: The rare-earth element, yttrium, was mined by one company as a constituent of the mineral bastnasite, but was not recovered as a separate element during processing. Bastnasite, a rare-earth.20.0000 Free Free. Rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed 2805

  14. (Data in metric tons of yttrium oxide (Y2O3) content unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was not mined in the United States in 2004. Yttrium

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was not mined in the United States in 2004. Yttrium Relations 12-31-04 Thorium ores and concentrates (monazite) 2612.20.0000 Free. Rare-earth metals, scandium and compounds containing by weight >19% to rare-earth compounds, including

  15. (Data in metric tons of yttrium oxide (Y O ) content, unless otherwise noted)2 3 Domestic Production and Use: The rare-earth element, yttrium, was mined by one company as a constituent of the

    E-Print Network [OSTI]

    Domestic Production and Use: The rare-earth element, yttrium, was mined by one company as a constituent of the mineral bastnasite, but was not recovered as a separate element during processing. Bastnasite, a rare-earth/31/96 Thorium ores and concentrates (monazite) 2612.20.0000 Free Free. Rare-earth metals, scandium and yttrium

  16. (Data in metric tons of yttrium oxide (Y2O3) content unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was not mined in the United States in 2005. All

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was not mined in the United States in 2005. All yttrium-31-05 Thorium ores and concentrates (monazite) 2612.20.0000 Free. Rare-earth metals, scandium and yttrium and compounds containing by weight >19% to rare-earth compounds, including

  17. (Data in metric tons of yttrium oxide (Y O ) content, unless otherwise noted)2 3 Domestic Production and Use: The rare-earth element, yttrium, was mined as a constituent of the mineral bastnasite,

    E-Print Network [OSTI]

    Domestic Production and Use: The rare-earth element, yttrium, was mined as a constituent of the mineral bastnasite, but was not recovered as a separate element during processing. Bastnasite, a rare-earth/31/98 Thorium ores and concentrates (monazite) 2612.20.0000 Free Free. Rare-earth metals, scandium and yttrium

  18. (Data in metric tons of yttrium oxide (Y2O3) content, unless otherwise noted) Domestic Production and Use: The rare-earth element yttrium was mined as a constituent of the mineral bastnasite

    E-Print Network [OSTI]

    Production and Use: The rare-earth element yttrium was mined as a constituent of the mineral bastnasite at Mountain Pass, CA, but was not recovered as a separate element during processing. Bastnasite, a rare-earth Number Normal Trade Relations 12/31/01 Thorium ores and concentrates (monazite) 2612.20.0000 Free. Rare-earth

  19. Lead reduction in ambient air

    SciTech Connect (OSTI)

    Smith, R.D.; Kiehn, O.A.; Wilburn, D.R.; Bowyer, R.C.

    1987-01-01T23:59:59.000Z

    The Bureau of Mines evaluated the emission control methods, including the capital investments and operating cost, necessary for further reducing lead levels in ambient air at the Glover, Herculaneum, and Buick smelter-refineries in Missouri and the East Helena, MT, smelter. This report presents theoretically achievable lead emission reductions and estimated capital and operating costs.

  20. SOLUTION MINING IN SALT DOMES OF THE GULF COAST EMBAYMENT

    SciTech Connect (OSTI)

    Griswold, G. B.

    1981-02-01T23:59:59.000Z

    Following a description of salt resources in the salt domes of the gulf coast embayment, mining, particularly solution mining, is described. A scenario is constructed which could lead to release of radioactive waste stored in a salt dome via inadvertent solution mining and the consequences of this scenario are analyzed.

  1. EUROBRISA products documentation This page (http://eurobrisa.cptec.inpe.br/) presents 1-month lead South America precipitation

    E-Print Network [OSTI]

    South America precipitation forecasts and verification products for three month seasons. For example surface temperatures as predictor variables for precipitation over South America. For example

  2. EUROBRISA products documentation This page (http://eurobrisa.cptec.inpe.br/) presents 1-month lead South America precipitation

    E-Print Network [OSTI]

    South America precipitation forecasts and verification products for three month seasons. For example Pacific and Atlantic sea surface temperatures as predictor variables for precipitation over South America

  3. (Data in thousand metric tons of copper content, unless noted) Domestic Production and Use: Domestic mine production in 1995 continued its upward trend, begun in 1984, rising

    E-Print Network [OSTI]

    in new scrap was consumed at brass mills. Of the total copper recovered from scrap, copper smelters50 COPPER (Data in thousand metric tons of copper content, unless noted) Domestic Production, Arizona, Utah, New Mexico, Montana, and Michigan, accounted for 97% of domestic production; copper

  4. Data Mining Ryan Benton

    E-Print Network [OSTI]

    Raghavan, Vijay

    Data Mining Ryan Benton Center for Advanced Computer Studies University of Louisiana at Lafayette in Databases (KDD) ! Data Mining Related Fields Research Issues Tasks ! Association Mining Problem;9 KDD vs. DATA MINING ! Synonyms (?) ! KDD More than just finding pattern Mining, dredging

  5. Coal mine directory: United States and Canada

    SciTech Connect (OSTI)

    NONE

    2004-07-01T23:59:59.000Z

    The directory gives a state-by-state listing of all US and Canadian coal producers. It contains contact information as well as the type of mine, production statistics, coal composition, transportation methods etc. A statistical section provides general information about the US coal industry, preparation plants, and longwall mining operations.

  6. EUROBRISA products documentation This page (http://eurobrisa.cptec.inpe.br/) presents 1-month lead South America precipitation

    E-Print Network [OSTI]

    South America precipitation forecasts and verification products for three month seasons. For example) that uses Pacific and Atlantic sea surface temperatures as predictor variables for precipitation over South America. For example, the observed sea surface temperature in the previous February is used as predictor

  7. (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: In 1998, little if any tungsten concentrate was produced from U.S. mines.

    E-Print Network [OSTI]

    as cutting and wear-resistant materials primarily in the metalworking, oil and gas drilling, mining plan Disposals Material inventory inventory for disposal FY 1998 FY 1998 Carbide powder 871

  8. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: A mine in California restarted operations and made its first shipment of tungsten

    E-Print Network [OSTI]

    in the metalworking, mining, oil- and gas-drilling, and construction industries. The remaining tungsten was consumed inventory inventory for disposal FY 2007 FY 2007 Ferrotungsten 6 136 Metal powder 268 268 136 34 Ores

  9. (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: In 1997, little if any tungsten concentrate was produced from U.S. mines.

    E-Print Network [OSTI]

    as cutting and wear-resistant materials primarily in the metalworking, oil and gas drilling, mining inventory inventory for disposal FY 1997 FY 1997 Carbide powder 871 -- -- -- -- Ferrotungsten 385

  10. Precision Mining

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for medical point ofPowerSaver ExemplaryPrecision Mining

  11. An improved formulation of the underground mine scheduling ...

    E-Print Network [OSTI]

    2012-11-21T23:59:59.000Z

    set within a resource production/consumption framework is presented, ...... Mining Engineering, Amer. Inst. Min. Metall. Pet. Eng, 55(8):33–39,. 2003. 8. J. Little ...

  12. A Multistage Stochastic Programming Approach to Open Pit Mine ...

    E-Print Network [OSTI]

    2008-10-24T23:59:59.000Z

    Oct 24, 2008 ... have been made to use such multiple estimates in mine production ..... should, perhaps, be viewed as a process that is part “exploration” and.

  13. Equipment Selection for Surface Mining: A Review

    E-Print Network [OSTI]

    2013-07-19T23:59:59.000Z

    extract and haul mined material, including both waste and ore, over the lifetime .... tions where primary excavations occur and stockpiles where reserve material is ... with respect to period demand, productivity balancing requirements between

  14. Longwall mining of thin seams

    SciTech Connect (OSTI)

    Curth, E A

    1981-01-01T23:59:59.000Z

    Thin seam operations pose a challenge to the ingenuity of mining engineers to overcome the factor of human inconvenience in the restricted environment and associated high cost production. Surprisingly, low seam longwalls in the Federal Republic of Germany in an average thickness of 35 in. and dipping less than 18/sup 0/ come close to achieving the average production rate of all German longwall operations. They are all plow faces, and a consistent production of 3300 tons per day and a productivity of 40 tons per man shift are reported from one of the thin seam longwalls. These results were attained by reliable high-capacity equipment and roof support by shields that can be collapsed to as low as 22 inches. Maximum mining height for plow operated faces lies at 31.5 inches. Technology for mechanized mining of flat lying coalbeds less than 31.5 inches in thickness without rock cutting is not available, and firmness of coal, undulation of the strata, coalbed thickness variation, and the necessity of cutting rock, particularly through faults, set limits to plow application. The in-web shearer can be used in firm coal to a minimum mining height of 40 inches, and a daily production of 1650 to 2200 tons is reported from a longwall in the Saar district of Germany equipped with such a shearer and shields. Numerous in-web shearers are employed in the United Kingdom; reports as to their success are contradictory. Also, experience in the United States, though limited, has been negative. The steady increase in output from single drum shearer faces in Pennsylvania is a remarkable achievement, and occasional record breaking peaks in production indicate the potential of such mining. Technology development for the future is discussed.

  15. Theoretical Studies of Rare-Earth Nuclei leading to $_{50}$Sn-Daughter Products and the Associated Shell Effects

    E-Print Network [OSTI]

    Sushil Kumar

    2012-05-26T23:59:59.000Z

    Cluster decays of rare-earth nuclei are studied with a view to look for neutron magic shells for the $_{50}$Sn nucleus as the daughter product always. The $^{100}$Sn and $^{132}$Sn radioactivities are studied to find the most probable cluster decays and the possibility, if any, of new neutron shells. For a wide range of parent nuclei considered here (from Ba to Pt) $^{12}$C from $^{112}$Ba and $^{78}$Ni from $^{210}$Pt parent are predicted to be the most probable clusters (minimum decay half-life) referring to $^{100}$Sn and $^{132}$Sn daughters, respectively. Also, $^{22}$Mg decay of $^{122}$Sm is indicated at the second best possibilty for $^{100}$Sn-daughter decay. In addition to these well known magic shells (Z=50, N=50 and 82), a new magic shell at Z=50, N=66 ($^{116}$Sn daughter) is indicated for the $^{64}$Ni decay from $^{180}$Pt parent.

  16. Mineralogy and Geochemistry of Pb, Zn and Ag Mine Tailings Originating From Carbonate-Rich Deposits

    E-Print Network [OSTI]

    McClure, Roberta 1981-

    2012-11-29T23:59:59.000Z

    Mining for silver, lead, zinc, and copper in Zimapan, Hidalgo State, Mexico has been ongoing since 1576. Unsecured tailings heaps and associated acid mine drainage have presented problems related to soil quality, water quality, and dust emission...

  17. Rights and Duties of Mines and Mine Owners, General (Missouri)

    Broader source: Energy.gov [DOE]

    This legislation addresses general operational guidelines for mine owners regarding public notices, fees, land and mineral ownership, requirements for mining in certain municipalities, and mining...

  18. Next-to-Next-to-Leading-Order Subtraction Formalism in Hadron Collisions and its Application to Higgs-Boson Production at the Large Hadron Collider

    SciTech Connect (OSTI)

    Catani, Stefano; Grazzini, Massimiliano [INFN, Sezione di Firenze and Dipartimento di Fisica, Universita di Firenze, I-50019 Sesto Fiorentino, Florence (Italy)

    2007-06-01T23:59:59.000Z

    We consider higher-order QCD corrections to the production of colorless high-mass systems (lepton pairs, vector bosons, Higgs bosons, etc.) in hadron collisions. We propose a new formulation of the subtraction method to numerically compute arbitrary infrared-safe observables for this class of processes. To cancel the infrared divergences, we exploit the universal behavior of the associated transverse-momentum (q{sub T}) distributions in the small-q{sub T} region. The method is illustrated in general terms up to the next-to-next-to-leading order in QCD perturbation theory. As a first explicit application, we study Higgs-boson production through gluon fusion. Our calculation is implemented in a parton level Monte Carlo program that includes the decay of the Higgs boson into two photons. We present selected numerical results at the CERN Large Hadron Collider.

  19. Supplemental Release Limits for the Directed Reuse of Steel in Road Barriers and Lead in Shielding Products by the Department of Energy

    SciTech Connect (OSTI)

    Coleman, RL

    2006-04-07T23:59:59.000Z

    The DOE National Center of Excellence for Metals Recycle (NMR) proposes to define and implement a complex-wide directed reuse strategy for surplus radiologically impacted lead (Pb) and steel as part of the U.S. Department of Energy's commitment to the safe and cost-effective recycle or reuse of excess materials and equipment across the DOE complex. NMR will, under this proposal, act on behalf of the DOE Office of Environmental Management, Office of Technical Program Integration (specifically EM-22), as the Department's clearinghouse for DOE surplus lead, steel and products created from these materials by developing and maintaining a cost-effective commercially-based contaminated lead and steel recycle program. It is NMR's intention, through this directed reuse strategy, to mitigate the adverse environmental and economic consequences of managing surplus lead and steel as a waste within the complex. This approach promotes the safe and cost-effective reuse of scrap metals in support of the Department's goals of resource utilization, energy conservation, pollution prevention and waste minimization. This report discusses recommendations for supplemental radiological release limits for the directed reuse of contaminated lead and steel by the DOE within the nuclear industry. The limits were originally selected from the American National Standards Institute and Health Physics Society standard N13.12 titled ''Surface and Volume Radioactivity Standards for Clearance'' (Health Physics Society, 1999) but were subsequently modified as a result of application-specific issues. Both the health and measurement implications from the adoption and use of the limits for directed reuse scenarios are discussed within this report.

  20. Coal mine methane global review

    SciTech Connect (OSTI)

    NONE

    2008-07-01T23:59:59.000Z

    This is the second edition of the Coal Mine Methane Global Overview, updated in the summer of 2008. This document contains individual, comprehensive profiles that characterize the coal and coal mine methane sectors of 33 countries - 22 methane to market partners and an additional 11 coal-producing nations. The executive summary provides summary tables that include statistics on coal reserves, coal production, methane emissions, and CMM projects activity. An International Coal Mine Methane Projects Database accompanies this overview. It contains more detailed and comprehensive information on over two hundred CMM recovery and utilization projects around the world. Project information in the database is updated regularly. This document will be updated annually. Suggestions for updates and revisions can be submitted to the Administrative Support Group and will be incorporate into the document as appropriate.

  1. Mined land reclamation by biological reactivation

    SciTech Connect (OSTI)

    Gozon, J.S.; Konya, C.J.; Lukovic, S.S.; Lundquist, R.G.; Olah, J.

    1982-12-01T23:59:59.000Z

    A mine reclamation technique, developed in Europe, restores land to full productivity within two years without topsoil replacement. The method deliberately reestablishes within one year following mining, the required biological balance between microbes, enzymes, and trace elements in the rock spoil rather than waiting five or more years for natural processes to restore balance. The technique is called Biological Reactivation (BR). This paper discusses the feasibility of BR reclamation after surface mining operations in the US. Staff of the Ohio Mining and Mineral Resources Research Institute completed an OSM-sponsored research project on BR in which physical and chemical tests characterized 140 spoil samples obtained from 10 surface mining operations. Test results indicated that Biological Reactivation technology could be effectively applied, at least in the test areas sampled within Appalachia. Preliminary estimates make clear that the new technique reduces reclamation costs on prime farmland by approximately 95% compared to topsoil segregation and replacement methods.

  2. Industrial hygiene aspects of underground oil shale mining

    SciTech Connect (OSTI)

    Hargis, K.M.; Jackson, J.O.

    1982-01-01T23:59:59.000Z

    Health hazards associated with underground oil shale mining are summarized in this report. Commercial oil shale mining will be conducted on a very large scale. Conventional mining techniques of drilling, blasting, mucking, loading, scaling, and roof bolting will be employed. Room-and-pillar mining will be utilized in most mines, but mining in support of MIS retorting may also be conducted. Potential health hazards to miners may include exposure to oil shale dusts, diesel exhaust, blasting products, gases released from the oil shale or mine water, noise and vibration, and poor environmental conditions. Mining in support of MIS retorting may in addition include potential exposure to oil shale retort offgases and retort liquid products. Based upon the very limited industrial hygiene surveys and sampling in experimental oil shale mines, it does not appear that oil shale mining will result in special or unique health hazards. Further animal toxicity testing data could result in reassessment if findings are unusual. Sufficient information is available to indicate that controls for dust will be required in most mining activities, ventilation will be necessary to carry away gases and vapors from blasting and diesel equipment, and a combination of engineering controls and personal protection will likely be required for control of noise. Recommendations for future research are included.

  3. Method of locating underground mines fires

    DOE Patents [OSTI]

    Laage, Linneas (Eagam, MN); Pomroy, William (St. Paul, MN)

    1992-01-01T23:59:59.000Z

    An improved method of locating an underground mine fire by comparing the pattern of measured combustion product arrival times at detector locations with a real time computer-generated array of simulated patterns. A number of electronic fire detection devices are linked thru telemetry to a control station on the surface. The mine's ventilation is modeled on a digital computer using network analysis software. The time reguired to locate a fire consists of the time required to model the mines' ventilation, generate the arrival time array, scan the array, and to match measured arrival time patterns to the simulated patterns.

  4. Centrality and rapidity dependence of inclusive jet production in $\\sqrt{s_\\mathrm{NN}} = 5.02$ TeV proton--lead collisions with the ATLAS detector

    E-Print Network [OSTI]

    ATLAS Collaboration

    2014-12-12T23:59:59.000Z

    Measurements of the centrality and rapidity dependence of inclusive jet production in $\\sqrt{s_\\mathrm{NN}} = 5.02$ TeV proton--lead ($p$+Pb) collisions and the jet cross-section in $\\sqrt{s} = 2.76$ TeV proton--proton collisions are presented. These quantities are measured in datasets corresponding to an integrated luminosity of 27.8 nb$^{-1}$ and 4.0 pb$^{-1}$, respectively, recorded with the ATLAS detector at the Large Hadron Collider in 2013. The $p$+Pb collision centrality was characterised using the total transverse energy measured in the pseudorapidity interval $-4.9 < \\eta < -3.2$ in the direction of the lead beam. Results are presented for the double-differential per-collision yields as a function of jet rapidity and transverse momentum ($p_\\mathrm{T}$) for minimum-bias and centrality-selected $p$+Pb collisions, and are compared to the jet rate from the geometric expectation. The total jet yield in minimum-bias events is slightly enhanced above the expectation in a $p_\\mathrm{T}$-dependent manner but is consistent with the expectation within uncertainties. The ratios of jet spectra from different centrality selections show a strong modification of jet production at all $p_\\mathrm{T}$ at forward rapidities and for large $p_\\mathrm{T}$ at mid-rapidity, which manifests as a suppression of the jet yield in central events and an enhancement in peripheral events. These effects imply that the factorisation between hard and soft processes is violated at an unexpected level in proton--nucleus collisions. Furthermore, the modifications at forward rapidities are found to be a function of the total jet energy only, implying that the violations may have a simple dependence on the hard parton-parton kinematics.

  5. Mining Regulations (Missouri)

    Broader source: Energy.gov [DOE]

    This legislation applies to all mines in this state engaged in the mining or extraction of minerals for commercial purposes, except barite, marble, limestone, and sand and gravel, or the...

  6. Vendors boot up a new generation of mining software

    SciTech Connect (OSTI)

    Carter, R.A.

    2008-10-15T23:59:59.000Z

    From complete mine management down to the smallest detail of process or machine design, the latest programs are claimed to process and display data easier, faster, and more accurately. MINExpo 2008 held in Las Vegas in September offered a bonanza of information on complete mine management to specilaized financial modules. Gemcom Software introduced new versions of five of its key products - Surpac 6.1, GEMS 6.2, Minex 5.3, MinerSched 6.0 and Whittle 4.2. Lerca Geosystems launched its Jigsaw 360 mine management suite, encompassing GPS navigation. Products launched by Modular Mining systems, Carlson Software, DEM Solutions and Logimine are also mentioned. 2 figs.

  7. High volume - high value usage of Flue Gas Desulfurization (FGD) by-products in underground mines. Quarterly report, October 1, 1995--December 31, 1995

    SciTech Connect (OSTI)

    NONE

    1997-05-01T23:59:59.000Z

    The amount of dry FGD materials produced in the U.S. has not been increasing at the high rate originally anticipated. This has been due to a number of economic factors affecting the utility industry. Technologies for the disposal of large amounts of materials are not going to be implemented in the near term. In light of this development the target application for this project is being changed from highwall adit filling to the filling of auger holes to allow for highwall mining. This application focuses on using the dry FGD material to recover coal isolated by excessive augering. It produces 10 or more times the amount of coal per ton of dry FGD utilized than the originally proposed methodology. It also does not require extensive equipment development and, if applied to abandoned mine lands, may have substantially more significant environmental benefit. We also propose to use a spray dryer material for the demonstration instead of the fluidized bed material originally proposed. The spray dryer material is already slacked eliminating problems associated with heat generation at the mine site. Auger hole grouting with FGD material is also best performed by hydraulic emplacement methods.

  8. Coal conversion siting on coal mined lands: water quality issues

    SciTech Connect (OSTI)

    Triegel, E.K.

    1980-01-01T23:59:59.000Z

    The siting of new technology coal conversion facilities on land disturbed by coal mining results in both environmental benefits and unique water quality issues. Proximity to mining reduces transportation requirements and restores disrupted land to productive use. Uncertainties may exist, however, in both understanding the existing site environment and assessing the impact of the new technology. Oak Ridge National Laboratory is currently assessing the water-related impacts of proposed coal conversion facilities located in areas disturbed by surface and underground coal mining. Past mining practices, leaving highly permeable and unstable fill, may affect the design and quality of data from monitoring programs. Current mining and dewatering, or past underground mining may alter groundwater or surface water flow patterns or affect solid waste disposal stability. Potential acid-forming material influences the siting of waste disposal areas and the design of grading operations. These and other problems are considered in relation to the uncertainties and potentially unique problems inherent in developing new technologies.

  9. ITP Mining: Education Roadmap for Mining Professionals (December...

    Broader source: Energy.gov (indexed) [DOE]

    of Mining Engineering University of Missouri-Rolla John R. Sturgul JRS Consulting Services Richard J. Sweigard ProfessorChair of Mining Engineering University of Kentucky...

  10. Labor and Safety: Mines and Mining Safety (Indiana)

    Broader source: Energy.gov [DOE]

    This section contains labor regulations pertaining specifically to coal mine workers. The law establishes the Indiana Mining Board. The Board's duties include: collecting and distributing...

  11. ITP Mining: Mining Industry of the Future Mineral Processing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of the Future Mineral Processing Technology Roadmap ITP Mining: Mining Industry of the Future Mineral Processing Technology Roadmap mptroadmap.pdf More Documents & Publications ITP...

  12. Mine Safety & Health Specialist

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will serve as the Carlsbad Field Office (CBFO) Mine Safety & Health Specialist and is primarily responsible for inspecting and evaluating the performance...

  13. Interstate Mining Compact (Maryland)

    Broader source: Energy.gov [DOE]

    This legislation authorizes the state's entrance into the Interstate Mining Compact, a multi-state governmental agency / organization that represents the natural resource and related environmental...

  14. Coal Mining (Iowa)

    Broader source: Energy.gov [DOE]

    These sections describe procedures for coal exploration and extraction, as well as permitting requirements relating to surface and underground coal mining. These sections also address land...

  15. Coal Mining Regulations (Kentucky)

    Broader source: Energy.gov [DOE]

    Kentucky Administrative Regulation Title 405 chapters 1, 2, 3, 5, 7, 8, 10, 12, 16, 18 and 20 establish the laws governing coal mining in the state.

  16. Coal Mining Tax Credit (Arkansas)

    Broader source: Energy.gov [DOE]

    The Coal Mining Tax Credit provides an income or insurance premium tax credit of $2.00 per ton of coal mined, produced or extracted on each ton of coal mined in Arkansas in a tax year. An...

  17. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: Limited shipments of tungsten concentrates were made from a California mine in

    E-Print Network [OSTI]

    178 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and primary products, wrought and unwrought tungsten, and waste and scrap: China, 43%; Germany, 11%; Canada,630 1,450 Events, Trends, and Issues: World tungsten supply was dominated by Chinese production

  18. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: A tungsten mine in California produced concentrates in 2012. Approximately eight

    E-Print Network [OSTI]

    176 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and concentrates, intermediate and primary products, wrought and unwrought tungsten, and waste and scrap: China, 45,200 3,630 1,610 Events, Trends, and Issues: World tungsten supply was dominated by Chinese production

  19. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: One mine in California produced tungsten concentrates in 2010. Approximately

    E-Print Network [OSTI]

    176 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production. Import Sources (2006­09): Tungsten contained in ores and concentrates, intermediate and primary products, Trends, and Issues: World tungsten supply is dominated by Chinese production and exports. China

  20. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: A mine in California produced tungsten concentrates in 2009. Approximately eight

    E-Print Network [OSTI]

    176 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production. Import Sources (2005-08): Tungsten contained in ores and concentrates, intermediate and primary products, and Issues: World tungsten supply was dominated by Chinese production and exports. China's Government limited

  1. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: A tungsten mine in California produced concentrates in 2013. Approximately eight

    E-Print Network [OSTI]

    174 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and concentrates, intermediate and primary products, wrought and unwrought tungsten, and waste and scrap: China, 45,100 2,300 2,240 Events, Trends, and Issues: World tungsten supply was dominated by Chinese production

  2. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: One mine in California produced tungsten concentrates in 2011. Approximately

    E-Print Network [OSTI]

    176 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production (2007­10): Tungsten contained in ores and concentrates, intermediate and primary products, wrought: World tungsten supply is dominated by Chinese production and exports. China's Government regulates its

  3. High pressure water jet mining machine

    DOE Patents [OSTI]

    Barker, Clark R. (Rolla, MO)

    1981-05-05T23:59:59.000Z

    A high pressure water jet mining machine for the longwall mining of coal is described. The machine is generally in the shape of a plowshare and is advanced in the direction in which the coal is cut. The machine has mounted thereon a plurality of nozzle modules each containing a high pressure water jet nozzle disposed to oscillate in a particular plane. The nozzle modules are oriented to cut in vertical and horizontal planes on the leading edge of the machine and the coal so cut is cleaved off by the wedge-shaped body.

  4. Coal Mine Safety Act (Virginia)

    Broader source: Energy.gov [DOE]

    This Act is the primary legislation pertaining to coal mine safety in Virginia. It contains information on safety rules, safety standards and required certifications for mine workers, prohibited...

  5. E-Print Network 3.0 - artisanal mining communities Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Artisanal mining Gold Fair Trade Participation Ghana a b... s t r a c t In sub-Saharan Africa, artisanal ... Source: Louisiana Forest Products Development Center Collection:...

  6. E-Print Network 3.0 - artisanal gold mining Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    being produced at artisanal mines, rather than... market is relevant in achieving fairer trade in ... Source: Louisiana Forest Products Development Center Collection: Renewable...

  7. PRB mines mature

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2007-08-15T23:59:59.000Z

    Already seeing the results of reclamation efforts, America's largest surface mines advance as engineers prepare for the future. 30 years after the signing of the Surface Mining Control and Reclamation Act by Jimmy Carter, western strip mines in the USA, especially in the Powder River Basin, are producing more coal than ever. The article describes the construction and installation of a $38.5 million near-pit crusher and overland belt conveyor system at Foundation Coal West's (FCW) Belle Ayr surface mine in Wyoming, one of the earliest PRB mines. It goes on to describe the development by Rio Tinto of an elk conservatory, the Rochelle Hill Conservation Easement, on reclaimed land at Jacobs Ranch, adjacent to the Rochelle Hills. 4 photos.

  8. Nevada Bureau of Mines and Geology

    E-Print Network [OSTI]

    Tingley, Joseph V.

    are included. Metals Industrial Minerals Oil and Gas Geothermal Exploration Development Mining Processing This report, nineteenth of an annual series, describes 1997 mineral, oil and gas, and geothermal activities and accomplishments in Nevada: production statistics, exploration and development including drilling for petroleum

  9. Nevada Bureau of Mines and Geology

    E-Print Network [OSTI]

    Tingley, Joseph V.

    are included. Metals Industrial Minerals Oil and Gas Geothermal Exploration Development Mining Processing This report, twentieth of an annual series, describes 1998 mineral, oil and gas, and geothermal activities and accomplishments in Nevada: production statistics, exploration and development including drilling for petroleum

  10. Sentiment Analysis and Opinion Mining Bibliography

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    of Conference of the European Chapter of the Association for Computational Linguistics (EACL-06). 2006. 6 power of product features by mining consumer reviews. in Proceedings of the ACM SIGKDD Conference? in Proceedings of the International Conference on Computational Linguistics (COLING-2010). 2010. 14. Banea

  11. Table 23. Coal Mining Productivity by State, Mine Type, and Mine Production Range, 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystallineForeign ObjectOUR Table 1. Summary: ReportedEnergy Intensity,

  12. Research at Mines Fiscal Year

    E-Print Network [OSTI]

    Matlock, De Moor, Speer #12;New Initiatives · Unconventional Oil & gas, Fracking (Santi) · Mines NREL

  13. WIPP's Mine Rescue Teams Lead Competition | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation | Department of EnergyDepartment ofResponsible2013)EnergyUpdate

  14. Mining vertical coal seams in France

    SciTech Connect (OSTI)

    Schneiderman, S.J.

    1981-05-01T23:59:59.000Z

    French coal miners in the Lorraine Basin coalfields of Charbonnages de France, work under extremely difficult mining conditions. The coal seams are located in two parallel anticlines dipping to the southwest. On the northwest flanks the coal dips at angles up to 40/sup 0/; on the southeast flanks the coal dips as steep as 90/sup 0/. In addition to the problems associated with steeply dipping coal seams, the coal is often more than 3 meters (10 feet) thick, thus contributing the additional problems that are associated with thick seams. A cut-and-fill mining method is used and production of up to 400 tons per day for a three-shift working face has been achieved. The cut-and-fill mining method employed at Puit Reumaux, rising horizontal rooms with hydraulic stowing, is used in areas of the mine where seam dips exceed 45/sup 0/ and where seam thickness is from 2 to 5 meters (6.5 to 16.5 feet). Hydraulic stowing has many advantages for the Merlebach mine: The coalis located under urbanized areas and is also covered by water-bearing strata with hydraulic sand stowing there is little subsidence, so disturbances to the surface and the aquiferous zones are minimized. Hydraulic sand stowing also helps prevent eating and combustion.

  15. ITP Mining: Exploration and Mining Technology Roadmap

    Broader source: Energy.gov (indexed) [DOE]

    disturbance. Low-Cost and Efficient Production- Use advanced technologies to improve process efficiencies from exploration to final product. Advanced Products- Maintain and...

  16. Strip Mine Law (Missouri)

    Broader source: Energy.gov [DOE]

    This law authorizes the Land Reclamation Commission of the Department of Natural Resources to adopt and promulgate rules and regulations pertaining to strip mining of coal and reclamation, review...

  17. (Data in metric tons of lithium content unless otherwise noted) Domestic Production and Use: Chile was the leading lithium chemical producer in the world; Argentina, China, and

    E-Print Network [OSTI]

    and Use: Chile was the leading lithium chemical producer in the world; Argentina, China, and the United the recycling of lithium batteries. Import Sources (2005-08): Chile, 63%; Argentina, 35%; China, 1%; and other in 2009. Many claims in Nevada, as well as in Argentina, Australia, Bolivia, and Canada, have been leased

  18. (Data in thousand metric tons of zinc content, unless otherwise noted) Domestic Production and Use: The value of zinc mined in 2001, based on contained zinc recoverable from

    E-Print Network [OSTI]

    -fourths of production. Three primary and 12 large- and medium-sized secondary smelters refined zinc metal of commercial,500 2,600 2,400 Smelter primary, numbere 1,000 1,000 1,000 1,000 900 Net import reliance3 greatly exceeded smelter capacity, necessitating exports of concentrate. More than one-third of all

  19. Spatially resolved characterization of biogenic manganese oxide production within a bacterial biofilm

    E-Print Network [OSTI]

    Toner, Brandy; Fakra, Sirine; Villalobos, Mario; Warwick, Tony; Sposito, Garrison

    2004-01-01T23:59:59.000Z

    copper, zinc, lead, and arsenic by iron and manganese oxyhydroxide coatings on plankton in lakes polluted with mine and smelter

  20. CAERs's mine mapping program and Kentucky's mine mapping initiative

    SciTech Connect (OSTI)

    Hiett, J. [University of Kentucky Center for Applied Energy Research, Lexington, KY (United States). Mine Map Repository and Mine Map Information Systems

    2007-07-01T23:59:59.000Z

    Since 1884 the Kentucky Department of Mines and Minerals (KDMM now OMSL) has had a mine mapping function as it relates to mine safety. The CAER's Mine Mapping Program has provided this service to that agency since 1972. The program has been in continuous operation under the current staff and management over that period. Functions include operating the Mine Map Repository/Mine Map Information Center of the OMSL; and receiving and processing all annual coal mine license maps, old maps, and related data. The Kentucky Mine Mapping Initiative's goal is to ensure that every underground and surface mine map in Kentucky is located, digitized and online. The Kentucky mine mapping website plays a vital role in the safety of Kentuckians. The purpose of the web service is to make available electronic maps of mined out areas and approximately 32,000 engineering drawings of operating or closed mines that are located in the state. Future phases of the project will include the archival scanning of all submitted mine maps; the recovery from outside sources of maps that were destroyed in a 1948 fire; and the development of further technology to process maps and related data. 7 photos.

  1. (Data in metric tons of lithium content unless otherwise noted) Domestic Production and Use: Chile was the leading lithium chemical producer in the world; Argentina, China, and

    E-Print Network [OSTI]

    States is extremely difficult because of the large number of compounds used in a wide variety of end uses are estimated as follows: ceramics and glass, 31%; batteries, 23%; lubricating greases, 9%; air treatment, 6 conditions improved for lithium-based products in 2010. Sales volumes for the major lithium producers were

  2. National Mining Association Experimental Determination

    E-Print Network [OSTI]

    National Mining Association Experimental Determination of Radon Fluxes over Water #12;Introduction research funded by the National Mining Association (NMA) regarding radon fluxes from water surfaces surfaces at uranium recovery operations are insignificant and approximate background soil fluxes for most

  3. Privacy-preserving data mining

    E-Print Network [OSTI]

    Zhang, Nan

    2009-05-15T23:59:59.000Z

    sharing. We present and compare strategies for realizing these protocols. Theoretical analysis and experimental evaluation show that our protocols can generate accurate data mining models while protecting the privacy of the data being mined....

  4. Surface Coal Mining Regulations (Mississippi)

    Broader source: Energy.gov [DOE]

    The Surface Coal Mining Regulations are a combination of permitting requirements and environmental regulations that limit how, where and when coal can be mined. It protects lands that are under...

  5. Montana Coal Mining Code (Montana)

    Broader source: Energy.gov [DOE]

    The Department of Labor and Industry is authorized to adopt rules pertaining to safety standards for all coal mines in the state. The Code requires coal mine operators to make an accurate map or...

  6. Detailed mining study phase 3: Saba Yoi lignite deposit. Export trade information

    SciTech Connect (OSTI)

    NONE

    1994-07-01T23:59:59.000Z

    The study, conducted by John T. Boyd Company, was funded by the U.S. Trade and Development Agency on behalf of the Electricity Generating Authority of Thailand. The report presents Phase 3 of the feasibility study conducted for the development of the Saba Yoi Coal Mine. The study focuses on technical issues related to the development of the project including geological data and detailed mine development and scheduling. The report is divided into the following sections: (1) General Statement; (2) Summarized Findings; (3) Background; (4) Geology and Resources; (5) Geotechnical/Hydrogeological; (6) Detailed Mine Development; (7) Detailed Mine Production Scheduling; (8) Detailed Mine Analysis; (9) Mine Development and Facilities; (10) Mine Labor and Wages; and (11) Project Economics.

  7. Decontaminating lead bricks and shielding

    SciTech Connect (OSTI)

    Lussiez, G.

    1994-02-01T23:59:59.000Z

    Lead used for shielding is often surface contaminated with radioisotopes and is therefore a RCRA D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Laboratory decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 50 tons and likely to grow substantially of planned decommissioning operations. Thus lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for contaminated lead is removing the superficial layer of contamination with an abrasive medium under pressure. For lead, a mixture of alumina with water and air at about 40 psig rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a scaled-off area. The slurry of abrasive and particles of lead falls through a floor and is collected in a sump. A pump sends the slurry mixture back to the spray gun, creating a continuous process. The process generates small volumes of lead slurry that can be solidified and, because it passes the TCLP, is not a mixed waste. The decontaminated lead can be released for recycling.

  8. Decontaminating lead bricks and shielding

    SciTech Connect (OSTI)

    Lussiez, G.W.

    1993-05-01T23:59:59.000Z

    Lead used for shielding is often surface contaminated with radioisotopes and is therefore a RCRA D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Laboratory decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 50 tons and likely to grow substantially because of planned decommissioning operations. This lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for decontaminating lead is removing the thin superficial layer of contamination with an abrasive medium trader pressure. For lead, a mixture of alumina with water and air at about 40 psig rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a sealed-off area. The slurry of abrasive and particles of lead falls through a floor grating and is collected in a sump. A pump sends the slurry mixture back to the spray gun, creating a continuous process. The process generates small volumes of contaminated lead slurry that can be solidified and, because it passes the TCLP, is not a mixed waste. The decontaminated lead can be released for recycling.

  9. Decontaminating lead bricks and shielding

    SciTech Connect (OSTI)

    Lussiez, G.W.

    1993-01-01T23:59:59.000Z

    Lead used for shielding is often surface contaminated with radioisotopes and is therefore a RCRA D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Laboratory decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 50 tons and likely to grow substantially because of planned decommissioning operations. This lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for decontaminating lead is removing the thin superficial layer of contamination with an abrasive medium trader pressure. For lead, a mixture of alumina with water and air at about 40 psig rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a sealed-off area. The slurry of abrasive and particles of lead falls through a floor grating and is collected in a sump. A pump sends the slurry mixture back to the spray gun, creating a continuous process. The process generates small volumes of contaminated lead slurry that can be solidified and, because it passes the TCLP, is not a mixed waste. The decontaminated lead can be released for recycling.

  10. The Sudbury Mining District

    E-Print Network [OSTI]

    Bedell, Frank G.

    1906-06-01T23:59:59.000Z

    for Digital Scholarship. http://kuscholarworks.ku.edu Submitted to the School of Engineering of the University of Kansas in partial fulfillment of the requirements for a course in Mining Engineering ran THE SUDBURY MINING DISTRICT. A D i s s e r t a t i o... n P r e s e n t e d t o the F a c u l t y o f the SCHOOL OP ENGINEERING i n the UNIVERSITY OP KANSAS. F o r the Completion o f a Course i n MINING ENGINEERING. fey Prank G. B e d e l l . June 1906. PREFACE• I n t h i s paper w i l l be g i...

  11. Mining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy HealthComments MEMA:May1.docEx5.docof Energy AdverseMining Mining Supply

  12. Production

    Broader source: Energy.gov [DOE]

    Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of...

  13. Reclamation planning and operation at the Mae Moh Lignite Mine, Thailand

    SciTech Connect (OSTI)

    Miller, S.D. [Stuart D. Miller & Associates, Balmain (Australia); Teparat, C. [Electricity Generating Authority of Thailand, Mae Moh (Thailand)

    1990-12-31T23:59:59.000Z

    The Mae Moh Mine is a large open cut lignite mine situated in Northern Thailand. The mine produces lignite for coal fired power stations located adjacent to the mine. Current mine production is approximately 9 Mtpa providing lignite to eight power stations with a total output of 1,125 MW. The power development plan for Mae Moh provides for 19 power stations by the year 1999 which will require lignite production to be increased to 30.5 Mtpa and overburden will be mined at a rate approaching 300 Mtpa. Environmental management and reclamation planning at Mae Moh are major issues due to water quality impact and land use conflicts. This paper presents the key elements of the reclamation master plan and works strategy for progressive reclamation and water pollution control.

  14. Pre-Inca mining in the Southern Nasca Region, Peru

    E-Print Network [OSTI]

    that mining, as a process, is composed of three phases: exploration, development and production. Exploration for housing and transportation, if necessary. Production is the phase in which raw materials are processed (e analogies from modern practice they are able to distinguish the ancient sites dedicated to exploration

  15. Coal Mining on Pitching Seams

    E-Print Network [OSTI]

    Brown, George MacMillan

    1915-01-01T23:59:59.000Z

    . 1915* App r ov e d: Department of Mining Engineering* COAL MUTING ON PITCHING SEAMS A THESIS SUBMITTED TO THE FACULTY OP THE SCHOOL OP ENGINEERING OF THE UNIVERSITY OP KANSAS for THE DEGREE OF ENGINEER OF MINES BY GEORGE MACMILLAN BROWN 1915... PREFACE In the following dissertation on the subject of "Coal Mining in Pitching Beams" the writer desires to describe more particularly those methods of mining peculiar to coal mines in Oklahoma, with which he has been more or less familiar during...

  16. Recommendations for Preventing Lead Poisoning among the Internally Displaced Roma Population in Kosovo

    E-Print Network [OSTI]

    in Europe. The Trepca smelter in Mitrovica extracted metals including zinc, arsenic, lead, and cadmium from in the past, providing employment in both the smelter and the mines to people in the region, but the UN halted (BLLs). Work is underway to reopen the Trepca smelter and mining compound in North Mitrovica. Currently

  17. Tests of Enhanced Leading Order QCD in W Boson plus Jet Production in 1.96-TeV Proton-Antiproton Collisions

    SciTech Connect (OSTI)

    Tsuno, Soushi; /Tsukuba U.

    2004-01-01T23:59:59.000Z

    The authors have studied the W + {ge} n jets process in Tevatron Run II experiment. The data used correspond to a total integrated luminosity of 72 pb{sup -1} taken from March 2002 through January 2003. The lowest order QCD predictions have been tested with a new prescription of the parton-jet matching, which allows to construct the enhanced LO phase space. According to this procedure, one gets unique results which do not depend on unphysical bias of kinematical cuts to avoid the collinear/infrared divergence in calculation. Namely, one can get the meaningful results in the lowest order prediction. The controllable event samples of the W boson plus jets events by the enhanced lowest order prediction will lead smaller systematic uncertainty than the naive prediction without any cares of the collinear/infrared divergence. They expect their method will be also useful to make systematically small samples as the background estimates in the top quark analysis. They found a good agreement between data and theory in typical kinematics distributions. The number of events for each inclusive sample up to 3 jets are compared with Monte Carlo calculations. A comparison with Run I results is also presented. This is the first result for the CDF Run II experiment.

  18. Production

    Broader source: Energy.gov [DOE]

    Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of cultivation systems.

  19. (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: Domestic mine production in 2009 declined by about 9% to 1.2 million tons and its

    E-Print Network [OSTI]

    makers, 11%; and copper smelters and refiners, 6%. Copper in all old and new, refined or remelted scrap48 COPPER (Data in thousand metric tons of copper content unless otherwise noted) Domestic--Arizona, Utah, New Mexico, Nevada, and Montana--accounted for more than 99% of domestic production; copper also

  20. (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: Domestic mine production in 2008 increased by about 12% to 1.3 million tons and

    E-Print Network [OSTI]

    plants, 14%; ingot makers, 9%; and copper smelters and refiners, 5%. Copper in all old and new, refined50 COPPER (Data in thousand metric tons of copper content unless otherwise noted) Domestic--Arizona, Utah, New Mexico, Nevada, and Montana--accounted for more than 99% of domestic production; copper also

  1. (Data in thousand metric tons of copper content unless otherwise noted) Domestic Production and Use: Domestic mine production in 2007 declined nominally to 1.19 million tons, but its

    E-Print Network [OSTI]

    plants, 11%; ingot makers, 9%; and copper smelters and refiners, 5%. Copper in all old and new, refined54 COPPER (Data in thousand metric tons of copper content unless otherwise noted) Domestic--Arizona, Utah, New Mexico, Nevada, and Montana--accounted for 99% of domestic production; copper was also

  2. Assessment of effective parameters on dilution using approximate reasoning methods in longwall mining method, Iran coal mines

    E-Print Network [OSTI]

    Owladeghaffari, H; Saeedi, G H R

    2008-01-01T23:59:59.000Z

    Approximately more than 90% of all coal production in Iranian underground mines is derived directly longwall mining method. Out of seam dilution is one of the essential problems in these mines. Therefore the dilution can impose the additional cost of mining and milling. As a result, recognition of the effective parameters on the dilution has a remarkable role in industry. In this way, this paper has analyzed the influence of 13 parameters (attributed variables) versus the decision attribute (dilution value), so that using two approximate reasoning methods, namely Rough Set Theory (RST) and Self Organizing Neuro- Fuzzy Inference System (SONFIS) the best rules on our collected data sets has been extracted. The other benefit of later methods is to predict new unknown cases. So, the reduced sets (reducts) by RST have been obtained. Therefore the emerged results by utilizing mentioned methods shows that the high sensitive variables are thickness of layer, length of stope, rate of advance, number of miners, type of...

  3. ITP Mining: Mining Industry of the Future Mineral Processing...

    Broader source: Energy.gov (indexed) [DOE]

    and activities in the industry and crossed various mined commodities including copper, uranium, iron ore, coal and others. The workshop participants included individuals from...

  4. Drinking Water Problems: Lead

    E-Print Network [OSTI]

    Dozier, Monty; McFarland, Mark L.

    2004-02-20T23:59:59.000Z

    Lead in drinking water can damage the brain, kidneys, nervous system and red blood cells. This publication explains how lead can enter drinking water, how to have your water tested, and how to eliminate lead from drinking water....

  5. ITP Mining: Energy and Environmental Profile of the U.S. Mining...

    Broader source: Energy.gov (indexed) [DOE]

    methods to produce lead metal. Some countries have significant electrolytic refinery production associated with cheap coal, hydroelectric power, or subsidized power....

  6. Mines and Quarries: The Coal Mines (Firedamp Drainage) Regulations, 1960 

    E-Print Network [OSTI]

    Wood, Richard

    1960-01-01T23:59:59.000Z

    These regulations, which are made by the Minister of Power under section 141 of the Mines and Quarries Act, 1954, apply to the collecting of firedamp in coal mines before it has been diluted by any ventilation therein and its safe disposal (this...

  7. November 2012 SOCIETY for MINING, METALLURGY, and

    E-Print Network [OSTI]

    November 2012 2013-2014 SOCIETY for MINING, METALLURGY, and EXPLORATION (SME) Colorado Section goals (mining/civil/environmental engineering, metallurgy, economic geology, geochemistry

  8. Minerals and Mining Program (South Dakota)

    Broader source: Energy.gov [DOE]

    The Minerals and Mining Program has the authority to oversee mining activities in the state and issue regulations pertaining to the permitting and environmental impact mitigation of, and...

  9. Mineralogical transformations controlling acid mine drainage...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mineralogical transformations controlling acid mine drainage chemistry. Mineralogical transformations controlling acid mine drainage chemistry. Abstract: The role of Fe(III)...

  10. Arkansas Surface Coal Mining Reclamation Act (Arkansas)

    Broader source: Energy.gov [DOE]

    The Arkansas Surface Coal Mining Reclamation Act authorizes the state to develop, adopt, issue and amend rules and regulations pertaining to surface coal mining and reclamation operations. These...

  11. Hydraulic mining method

    DOE Patents [OSTI]

    Huffman, Lester H. (Kent, WA); Knoke, Gerald S. (Kent, WA)

    1985-08-20T23:59:59.000Z

    A method of hydraulically mining an underground pitched mineral vein comprising drilling a vertical borehole through the earth's lithosphere into the vein and drilling a slant borehole along the footwall of the vein to intersect the vertical borehole. Material is removed from the mineral vein by directing a high pressure water jet thereagainst. The resulting slurry of mineral fragments and water flows along the slant borehole into the lower end of the vertical borehole from where it is pumped upwardly through the vertical borehole to the surface.

  12. Solar for Mining Hugh Rudnick

    E-Print Network [OSTI]

    Catholic University of Chile (Universidad Católica de Chile)

    the storage requirement to increase its participation worldwide #12;Solar Energy in Mining · Electrical Energy footprint · Electrowinning Heating on electrowinning process · Non-Metallic Mining Heating on nitrate Desalinization process Pumping Water treatment · Heating Water heating Space heating Space cooling #12;Ref

  13. Data Mining Tools Irfan Altas

    E-Print Network [OSTI]

    Turlach, Berwin A.

    Data Mining Tools Irfan Altas School of Information Studies, Charles Sturt University Wagga Wagga discuss several scalable and parallel discovery and predictive data mining tools. They successfully address many of the computational challenges associated with the analy­ sis of data sets with millions

  14. Web Mining for Hyperlinked Communities

    E-Print Network [OSTI]

    Hu, Wen-Chen

    Web Mining for Hyperlinked Communities Gary William Flake flake@research.nj.nec.com NEC Research Institute #12;Motivation for Web Mining More than 1B web pages and 20TB of raw data. Even more content will always be disorganized (or at best self-organized). In the future, everything will be on the web

  15. 1 INTRODUCTION Appalachian coal recovered during mining fre-

    E-Print Network [OSTI]

    of Appalachian underground coal mining (Newman 2003). Storage of coal processing waste is limited to above ground- ground room-and-pillar or longwall coal production do not allow for the separation of waste during coal. Such an analysis requires the ability to predict potential surface ground movements, both vertical (i

  16. Field site investigation: Effect of mine seismicity on groundwater hydrology

    SciTech Connect (OSTI)

    Ofoegbu, G.I.; Hsiung, S.; Chowdhury, A.H. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses; Philip, J. [Nuclear Regulatory Commission, Washington, DC (United States)

    1995-04-01T23:59:59.000Z

    The results of a field investigation on the groundwater-hydrologic effect of mining-induced earthquakes are presented in this report. The investigation was conducted at the Lucky Friday Mine, a silver-lead-zinc mine in the Coeur d`Alene Mining District of Idaho. The groundwater pressure in sections of three fracture zones beneath the water table was monitored over a 24-mo period. The fracture zones were accessed through a 360-m-long inclined borehole, drilled from the 5,700 level station of the mine. The magnitude, source location, and associated ground motions of mining-induced seismic events were also monitored during the same period, using an existing seismic instrumentation network for the mine, augmented with additional instruments installed specifically for the project by the center for Nuclear Waste Regulatory Analyses (CNWRA). More than 50 seismic events of Richter magnitude 1.0 or larger occurred during the monitoring period. Several of these events caused the groundwater pressure to increase, whereas a few caused it to decrease. Generally, the groundwater pressure increased as the magnitude of seismic event increased; for an event of a given magnitude, the groundwater pressure increased by a smaller amount as the distance of the observation point from the source of the event increased. The data was examined using regression analysis. Based on these results, it is suggested that the effect of earthquakes on groundwater flow may be better understood through mechanistic modeling. The mechanical processes and material behavior that would need to be incorporated in such a model are examined. They include a description of the effect of stress change on the permeability and water storage capacity of a fracture rock mass; transient fluid flow; and the generation and transmission of seismic waves through the rock mass.

  17. Data Analysis and Mining at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOffice ofINL is a U.S.11-26-20131DarenDataMining Data

  18. ESF Mine Power Center Platforms

    SciTech Connect (OSTI)

    T.A. Misiak

    2000-02-10T23:59:59.000Z

    The purpose and objective of this analysis is to structurally evaluate the existing Exploratory Studies Facility (ESF) mine power center (MPC) support frames and to design service platforms that will attach to the MPC support frames. This analysis follows the Development Plan titled ''Produce Additional Design for Title 111 Evaluation Report'' (CRWMS M&O 1999a). This analysis satisfies design recommended in the ''Title III Evaluation Report for the Surface and Subsurface Power System'' (CRWMS M&O 1999b, Section 7.6) and concurred with in the ''System Safety Evaluation of Title 111 Evaluation Reports Recommended Work'' (Gwyn 1999, Section 10.1.1). This analysis does not constitute a level-3 deliverable, a level-4 milestone, or a supporting work product. This document is not being prepared in support of the Monitored Geologic Repository (MGR) Site Recommendation (SR), Environmental Impact Statement (EIS), or License Application (LA) and should not be cited as a reference in the MGR SR, EIS, or LA.

  19. From Data Mining to Knowledge Mining Kenneth A. Kaufman and Ryszard S. Michalski

    E-Print Network [OSTI]

    Michalski, Ryszard S.

    From Data Mining to Knowledge Mining Kenneth A. Kaufman and Ryszard S. Michalski ABSTRACT In view learning, statistical data analysis, data mining, text mining, data visualization, pattern recognition, etc for an emerging research direction, called knowledge mining, by which we mean the derivation of high

  20. NEW MEXICO SCHOOL OF MINES STATE BUREAU OF MINES AND MINERAL RESOURCES

    E-Print Network [OSTI]

    Lee, Cin-Ty Aeolus

    NEW MEXICO SCHOOL OF MINES STATE BUREAU OF MINES AND MINERAL RESOURCES BULLETIN 13 FRONTISPIECE PIT AT HARDING MINE (To left of dump) DUMP AT HARDING MINE (To right of pit) #12;NEW MEXICO SCHOOL OF MINES STATE and Economic Features of the Pegmatites of Taos and Rio Arriba Counties, New Mexico By EVAN JUST SOCORRO, N. M

  1. The Economic Impact of Coal Mining in New Mexico

    SciTech Connect (OSTI)

    Peach, James; Starbuck, C.

    2009-06-01T23:59:59.000Z

    The economic impact of coal mining in New Mexico is examined in this report. The analysis is based on economic multipliers derived from an input-output model of the New Mexico economy. The direct, indirect, and induced impacts of coal mining in New Mexico are presented in terms of output, value added, employment, and labor income for calendar year 2007. Tax, rental, and royalty income to the State of New Mexico are also presented. Historical coal production, reserves, and price data are also presented and discussed. The impacts of coal-fired electricity generation will be examined in a separate report.

  2. Mining and Reclamation Technology Symposium

    SciTech Connect (OSTI)

    None Available

    1999-06-24T23:59:59.000Z

    The Mining and Reclamation Technology Symposium was commissioned by the Mountaintop Removal Mining/Valley Fill Environmental Impact Statement (EIS) Interagency Steering Committee as an educational forum for the members of the regulatory community who will participate in the development of the EIS. The Steering Committee sought a balanced audience to ensure the input to the regulatory community reflected the range of perspectives on this complicated and emotional issue. The focus of this symposium is on mining and reclamation technology alternatives, which is one of eleven topics scheduled for review to support development of the EIS. Others include hydrologic, environmental, ecological, and socio-economic issues.

  3. Proceedings, 27th international conference on ground control in mining

    SciTech Connect (OSTI)

    Peng, S.S.; Mark, C.; Finfinger, G. (and others) (eds.)

    2008-07-01T23:59:59.000Z

    Topics covered include: coal bumps and rockbursts, surface subsidence, surface mining, mine seals, longwall mining, pillars, roof bolting, rock mechanics and standing supports.

  4. Surface Coal Mining Law (Missouri)

    Broader source: Energy.gov [DOE]

    This law aims to provide for the regulation of coal mining in order to minimize or prevent its adverse effects, protect the environment to the extent possible, protect landowner rights, and...

  5. Coal Mining Reclamation (North Dakota)

    Broader source: Energy.gov [DOE]

    The Reclamation Division of the Public Service Commission is tasked with administering the regulation of surface coal mining and reclamation. Specific regulations can be found in article 69-05.2 of...

  6. DEVELOPMENT AND DEMONSTRATION OF A PILOT SCALE FACILITY FOR FABRICATION AND MARKETING OF LIGHTWEIGHT-COAL COMBUSTION BYPRODUCTS-BASED SUPPORTS AND MINE VENTILATION BLOCKS FOR UNDERGROUND MINES

    SciTech Connect (OSTI)

    Yoginder P. Chugh

    2002-10-01T23:59:59.000Z

    The overall goal of this program was to develop a pilot scale facility, and design, fabricate, and market CCBs-based lightweight blocks for mine ventilation control devices, and engineered crib elements and posts for use as artificial supports in underground mines to replace similar wooden elements. This specific project was undertaken to (1) design a pilot scale facility to develop and demonstrate commercial production techniques, and (2) provide technical and marketing support to Fly Lite, Inc to operate the pilot scale facility. Fly Lite, Inc is a joint venture company of the three industrial cooperators who were involved in research into the development of CCBs-based structural materials. The Fly-Lite pilot scale facility is located in McLeansboro, Illinois. Lightweight blocks for use in ventilation stoppings in underground mines have been successfully produced and marketed by the pilot-scale facility. To date, over 16,000 lightweight blocks (30-40 pcf) have been sold to the mining industry. Additionally, a smaller width (6-inch) full-density block was developed in August-September 2002 at the request of a mining company. An application has been submitted to Mine Safety and Health Administration for the developed block approval for use in mines. Commercialization of cribs and posts has also been accomplished. Two generations of cribs have been developed and demonstrated in the field. MSHA designated them suitable for use in mines. To date, over 2,000 crib elements have been sold to mines in Illinois. Two generations of posts were also demonstrated in the field and designated as suitable for use in mines by MSHA. Negotiations are currently underway with a mine in Illinois to market about 1,000 posts per year based on a field demonstration in their mine. It is estimated that 4-5 million tons CCBs (F-fly ash or FBC fly ash) may be utilized if the developed products can be commercially implemented in U.S. coal and non-coal mines.

  7. E-Print Network 3.0 - anthracite mines mines Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Land Management over Endangered Species Act violations connected to Grand Canyon uranium mining... of the Arizona 1 uranium mine, located just north of Grand Canyon...

  8. ITP Mining: Energy and Environmental Profile of the U.S. Mining...

    Broader source: Energy.gov (indexed) [DOE]

    with which human civilizations have been built. The United States Department of Energy and the National Mining Association are working in partnership to implement the Mining...

  9. Oil shale mining processing, uses, and environmental impacts. (Latest citations from the EI compendex*plus database). Published Search

    SciTech Connect (OSTI)

    NONE

    1995-09-01T23:59:59.000Z

    The bibliography contains citations concerning oil shale mining and retorting, uses, and related environmental aspects. References discuss pyrolyzed, gasified, and combusted oil shales. Product yields and oil quality, socioeconomic impacts, exploration, reclamation of mined lands, and waste disposal are covered. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  10. A waterjet mining machine for use in room and pillar mining operations. [Final report

    SciTech Connect (OSTI)

    Summers, D.A.

    1990-06-01T23:59:59.000Z

    A new mining machine is constructed for use in room and pillar mining operations. This machine uses the action of computer controlled, centrally located high pressure cutting lances to cut deep slots in a coal face. These slots stress relieve the coal ahead of the machine and outline blocks of coal. The movement forward of the machine then wedges up the lower block of coal. This wedging action is assisted by the gathering arms of the loader section of the machine, and by underlying oscillating waterjets which create a slot ahead of the loading wedge as it advances. Finally the top section of coal is brought down by the sequential advance of wedge faced roof support members, again assisted by the waterjet action from the central cutting arms. The machine is designed to overcome major disadvantages of existing room and pillar mining machines in regard to a reduction in respirable dust, the creation of an immediate roof support, and an increase in product size, with concomitant reduction in cleaning costs.

  11. A waterjet mining machine for use in room and pillar mining operations

    SciTech Connect (OSTI)

    Summers, D.A.

    1990-06-01T23:59:59.000Z

    A new mining machine is constructed for use in room and pillar mining operations. This machine uses the action of computer controlled, centrally located high pressure cutting lances to cut deep slots in a coal face. These slots stress relieve the coal ahead of the machine and outline blocks of coal. The movement forward of the machine then wedges up the lower block of coal. This wedging action is assisted by the gathering arms of the loader section of the machine, and by underlying oscillating waterjets which create a slot ahead of the loading wedge as it advances. Finally the top section of coal is brought down by the sequential advance of wedge faced roof support members, again assisted by the waterjet action from the central cutting arms. The machine is designed to overcome major disadvantages of existing room and pillar mining machines in regard to a reduction in respirable dust, the creation of an immediate roof support, and an increase in product size, with concomitant reduction in cleaning costs.

  12. Survey of nine surface mines in North America. [Nine different mines in USA and Canada

    SciTech Connect (OSTI)

    Hayes, L.G.; Brackett, R.D.; Floyd, F.D.

    1981-01-01T23:59:59.000Z

    This report presents the information gathered by three mining engineers in a 1980 survey of nine surface mines in the United States and Canada. The mines visited included seven coal mines, one copper mine, and one tar sands mine selected as representative of present state of the art in open pit, strip, and terrace pit mining. The purpose of the survey was to investigate mining methods, equipment requirements, operating costs, reclamation procedures and costs, and other aspects of current surface mining practices in order to acquire basic data for a study comparing conventional and terrace pit mining methods, particularly in deeper overburdens. The survey was conducted as part of a project under DOE Contract No. DE-AC01-79ET10023 titled The Development of Optimal Terrace Pit Coal Mining Systems.

  13. COST AND SCHEDULE FOR DRILLING AND MINING UNDERGROUND TEST FACILITIES

    E-Print Network [OSTI]

    Lamb, D.W.

    2013-01-01T23:59:59.000Z

    SHAFT SINKING IN-MINE DRILLiNG NEW MINE - 1500 M SURFACEORILUNG SHAFT SINKiNG FACIUTY DEVELOPMENT IN-MINE DRILLINGSURFACE DRILLING FACIUTY DEVELOPMENT IN-MINE DRILLING ~~NGM!

  14. Lead carbonate scintillator materials

    DOE Patents [OSTI]

    Derenzo, S.E.; Moses, W.W.

    1991-05-14T23:59:59.000Z

    Improved radiation detectors containing lead carbonate or basic lead carbonate as the scintillator element are disclosed. Both of these scintillators have been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to other known scintillator materials. The radiation detectors disclosed are favorably suited for use in general purpose detection and in medical uses. 3 figures.

  15. AS A MINING ENGINEER Mining provides the raw materials and energy resources needed to sustain modern civilization. Mining Engineers

    E-Print Network [OSTI]

    Simons, Jack

    AS A MINING ENGINEER Mining provides the raw materials and energy resources needed to sustain modern civilization. Mining Engineers are trained to determine the safest most sustainable way to remove for energy and mineral resources. The average American consumes approximately 45,000 pounds of minerals

  16. SkyMine Carbon Mineralization Pilot Project

    SciTech Connect (OSTI)

    Joe Jones; Clive Barton; Mark Clayton; Al Yablonsky; David Legere

    2010-09-30T23:59:59.000Z

    This Topical Report addresses accomplishments achieved during Phase 1 of the SkyMine{reg_sign} Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO{sub 2} from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO{sub 2} to products having commercial value (i.e., beneficial use), show the economic viability of the CO{sub 2} capture and conversion process, and thereby advance the technology to a point of readiness for commercial scale demonstration and proliferation. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at commercial scale. The primary objectives of Phase 1 of the project were to elaborate proven SkyMine{reg_sign} process chemistry to commercial pilot-scale operation and complete the preliminary design ('Reference Plant Design') for the pilot plant to be built and operated in Phase 2. Additionally, during Phase 1, information necessary to inform a DOE determination regarding NEPA requirements for the project was developed, and a comprehensive carbon lifecycle analysis was completed. These items were included in the formal application for funding under Phase 2. All Phase 1 objectives were successfully met on schedule and within budget.

  17. SkyMine Carbon Mineralization Pilot Project

    SciTech Connect (OSTI)

    Christenson, Norm; Walters, Jerel

    2014-12-31T23:59:59.000Z

    This Topical Report addresses accomplishments achieved during Phase 2b of the SkyMine® Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO2 from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO2 to products having commercial value (i.e., beneficial use), show the economic viability of the CO2 capture and conversion process, and thereby advance the technology to the point of readiness for commercial scale demonstration and deployment. The overall process is carbon negative, resulting in mineralization of CO2 that would otherwise be released into the atmosphere. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at the commercial scale. The project is being conducted in two phases. The primary objectives of Phase 1 were to evaluate proven SkyMine® process chemistry for commercial pilot-scale operation and complete the preliminary design for the pilot plant to be built and operated in Phase 2, complete a NEPA evaluation, and develop a comprehensive carbon life cycle analysis. The objective of Phase 2b was to build the pilot plant to be operated and tested in Phase 2c.

  18. Spatial Data Mining, Michael May, Fraunhofer AIS 1 Spatial Data Mining for Customer

    E-Print Network [OSTI]

    Morik, Katharina

    Spatial Data Mining, Michael May, Fraunhofer AIS 1 Spatial Data Mining for Customer Segmentation Intelligente Systeme #12;Spatial Data Mining, Michael May, Fraunhofer AIS 2 Introduction: a classic example? A good representation is the key to solving a problem Disease cluster #12;Spatial Data Mining, Michael

  19. LLM Oil, Gas and Mining Law Module Information: Oil, Gas & Mining Environmental Law I and

    E-Print Network [OSTI]

    Evans, Paul

    provide the arena in which the petroleum and mining conduct their operations, including the specific

  20. 8/19/2002 Data Mining: Foundation, Techniques and Applications 1 Data Mining: Foundation,

    E-Print Network [OSTI]

    Tung, Anthony Kum Hoe

    8/19/2002 Data Mining: Foundation, Techniques and Applications 1 Data Mining: Foundation;12/3/2007 Data Mining: Foundation, Techniques and Applications 2 Outline Introduction Foundation Graph Similarity for Keyword Search #12;12/3/2007 Data Mining: Foundation, Techniques and Applications 3 Graph, Graph

  1. Colorado School of Mines Graduate Bulletin 1999-2000 1 School of Mines

    E-Print Network [OSTI]

    Colorado School of Mines Graduate Bulletin 1999-2000 1 Colorado School of Mines 1999-2000 Graduate Bulletin #12;2 Colorado School of Mines Graduate Bulletin 1999-2000 To CSM Graduate Students This Bulletin is for your use as a source of continuing reference. Please save it. Published by Colorado School of Mines

  2. Colorado School of Mines Graduate Bulletin 2001-2002 1 School of Mines

    E-Print Network [OSTI]

    Colorado School of Mines Graduate Bulletin 2001-2002 1 Colorado School of Mines 2001-2002 Graduate Bulletin #12;2 Colorado School of Mines Graduate Bulletin 2001-2002 To CSM Graduate Students This Bulletin is for your use as a source of continuing reference. Please save it. Published by Colorado School of Mines

  3. "MINE YOUR OWN BUSINESS": USING PROCESS MINING TO TURN BIG DATA INTO REAL VALUE

    E-Print Network [OSTI]

    van der Aalst, Wil

    "MINE YOUR OWN BUSINESS": USING PROCESS MINING TO TURN BIG DATA INTO REAL VALUE Van der Aalst, Wil is to turn event data into valuable insights. Only process mining techniques directly relate event data-oriented analysis techniques (e.g., data mining and machines learning) typically focus on simple classification

  4. NU-MineBench: Understanding the Performance and Scalability Characteristics of Data Mining Algorithms

    E-Print Network [OSTI]

    Choudhary, Alok

    NU-MineBench: Understanding the Performance and Scalability Characteristics of Data Mining Clara. CA - 95052 pradeep.dubey@intel.com Abstract Data mining has become one of the most essential and distributed systems have provided abundant venues for improving the performance of data mining algorithms

  5. Mining royalties: a global study of their impact on investors, government and civil society

    SciTech Connect (OSTI)

    Otto James (and others)

    2006-08-15T23:59:59.000Z

    The book discusses the history of royalties and the types currently in use, covering issues such as tax administration, revenue distribution and reporting. It identifies the strengths and weaknesses of various royalty approaches and their impact on production decisions and mine economics. A section on governance looks at the management of mining revenue by governments and the need for transparency. There is an attached CD with 4 appendixes with examples of royalty legislation from over 40 countries. 10 figs., 40 tabs., 4 apps.

  6. Data Analysis and Mining at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mining Data Analysis and Mining microCTdani.jpg Data analysis techniques include post-processing (e.g., data statistics) of experimental datasets andor simulation output, as well...

  7. Oil, Gas, and Mining Leases (Nebraska)

    Broader source: Energy.gov [DOE]

    This section contains rules on oil, gas, and mining leases, and grants authority to the State of Nebraska and local governments to issue leases for oil and gas mining and exploration on their lands.

  8. Black Thunder Coal Mine and Los Alamos National Laboratory experimental study of seismic energy generated by large scale mine blasting

    SciTech Connect (OSTI)

    Martin, R.L.; Gross, D. [Thunder Basin Coal Co., Wright, WY (United States); Pearson, D.C.; Stump, B.W. [Los Alamos National Lab., NM (United States); Anderson, D.P. [Southern Methodist Univ., Dallas, TX (United States). Dept. of Geological Sciences

    1996-12-31T23:59:59.000Z

    In an attempt to better understand the impact that large mining shots will have on verifying compliance with the international, worldwide, Comprehensive Test Ban Treaty (CTBT, no nuclear explosion tests), a series of seismic and videographic experiments has been conducted during the past two years at the Black Thunder Coal Mine. Personnel from the mine and Los Alamos National Laboratory have cooperated closely to design and perform experiments to produce results with mutual benefit to both organizations. This paper summarizes the activities, highlighting the unique results of each. Topics which were covered in these experiments include: (1) synthesis of seismic, videographic, acoustic, and computer modeling data to improve understanding of shot performance and phenomenology; (2) development of computer generated visualizations of observed blasting techniques; (3) documentation of azimuthal variations in radiation of seismic energy from overburden casting shots; (4) identification of, as yet unexplained, out of sequence, simultaneous detonation in some shots using seismic and videographic techniques; (5) comparison of local (0.1 to 15 kilometer range) and regional (100 to 2,000 kilometer range) seismic measurements leading to determine of the relationship between local and regional seismic amplitude to explosive yield for overburden cast, coal bulking and single fired explosions; and (6) determination of the types of mining shots triggering the prototype International Monitoring System for the CTBT.

  9. Dawdon Mine Water Heat Pump Trial

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    14-Dec-12 Dawdon Mine Water Heat Pump Trial #12;14 December 2012 2 Potential for Mine Water sourced heating Dawdon heat pump trial A demonstration project Contents #12;Friday, 14 December 2012 3 The UK salinity High Iron (removed by lime treatment) Offices , 8 rooms #12;Dawdon heat pump Warm mine water

  10. SPATIAL DATA MINING IMPLEMENTATION Alternatives and perfermances

    E-Print Network [OSTI]

    Zeitouni, Karine

    SPATIAL DATA MINING IMPLEMENTATION Alternatives and perfermances NADJIM CHELGHOUM, KARINE ZEITOUNI Abstract: Spatial data mining requires the analysis of the interactions in space. These interactions can be materialized using distance tables, reducing spatial data mining to multi-table analysis. However, conventional

  11. Mining Binary Expressions: Applications and Toon Calders

    E-Print Network [OSTI]

    Antwerpen, Universiteit

    ,pareda}@uia.ua.ac.be Technical report TR0008, June 2000 Abstract In data mining, searching for frequent patterns is a common exponentially large, we use data mining techniques to avoid expo- nential execution times. We present results of the number of partial orders 22 B Example run of the algorithm 24 2 #12;1 Introduction In data mining

  12. Massively Parallel Data Mining Using Reconfigurable Hardware

    E-Print Network [OSTI]

    Chamberlain, Roger

    ]. The basic idea is to decompose the data mining oper- ation into two components. The low-level componentMassively Parallel Data Mining Using Reconfigurable Hardware: Approximate String Matching Qiong. Chamberlain, Ronald S. Indeck, Benjamin West, and Jason White, "Massively Parallel Data Mining Using

  13. ZART: A Multifunctional Itemset Mining Algorithm

    E-Print Network [OSTI]

    Boyer, Edmond

    independent, multi-purposed data mining platform, incorporating a rich collection of data mining algorithms, allowing a number of auxiliary operations for preparing and filtering data, and, for interpreting in data mining today. Generating strong association rules from frequent itemsets often results in a huge

  14. Frontiers of biomedical text mining: current progress

    E-Print Network [OSTI]

    Yu, Hong

    Frontiers of biomedical text mining: current progress Pierre Zweigenbaum, Dina Demner-Fushman, Hong of biomedical text mining continue to present interesting challenges and opportunities for great improvements and interesting research. In this article we review the current state of the art in biomedical text mining or `Bio

  15. HYDROLOGY AND EROSION IMPACTS OF MINING DERIVED COASTAL SAND DUNES, C H ~ A R A LBAY, CHILE

    E-Print Network [OSTI]

    HYDROLOGY AND EROSION IMPACTS OF MINING DERIVED COASTAL SAND DUNES, C H ~ A R A LBAY, CHILE Daniel, nitrates, iodine, and lithium. Some of the gold and silverandallofthemolybdenumareproducedasby- products

  16. AI en Data mining Van AI tot Data mining

    E-Print Network [OSTI]

    Kosters, Walter

    een heel breed vakgebied, met onder andere: · robotica: Hoe programmeer je een robot? · data mining soort computerprogramma's doet mee in de jaarlijkse Loebner-contest. 6 #12;AI Robotica Een robot is een science fiction schrijver Isaac Asimov (auteur van "I, Robot") zijn de drie wetten van de robotica: 1. Een

  17. Modeled atmospheric radon concentrations from uranium mines

    SciTech Connect (OSTI)

    Droppo, J.G.

    1985-04-01T23:59:59.000Z

    Uranium mining and milling operations result in the release of radon from numerous sources of various types and strengths. The US Environmental Protection Agency (EPA) under the Clean Air Act, is assessing the health impact of air emissions of radon from underground uranium mines. In this case, the radon emissions may impact workers and residents in the mine vicinity. To aid in this assessment, the EPA needs to know how mine releases can affect the radon concentrations at populated locations. To obtain this type of information, Pacific Northwest Laboratory used the radon emissions, release characteristics and local meterological conditions for a number of mines to model incremental radon concentrations. Long-term, average, incremental radon concentrations were computed based on the best available information on release rates, plume rise parameters, number and locations of vents, and local dispersion climatology. Calculations are made for a model mine, individual mines, and multiple mines. Our approach was to start with a general case and then consider specific cases for comparison. A model underground uranium mine was used to provide definition of the order of magnitude of typical impacts. Then computations were made for specific mines using the best mine-specific information available for each mine. These case study results are expressed as predicted incremental radon concentration contours plotted on maps with local population data from a previous study. Finally, the effect of possible overlap of radon releases from nearby mines was studied by calculating cumulative radon concentrations for multiple mines in a region with many mines. The dispersion model, modeling assumptions, data sources, computational procedures, and results are documented in this report. 7 refs., 27 figs., 18 tabs.

  18. Robot to the Mine Rescue

    Broader source: Energy.gov [DOE]

    To increase the speed of rescue efforts, scientists and engineers at the Energy Department’s Sandia National Laboratories recently developed a new robot, called the Gemini-Scout Mine Rescue Robot, that quickly finds dangers and provides relief to trapped miners.

  19. Corner-cutting mining assembly

    DOE Patents [OSTI]

    Bradley, J.A.

    1981-07-01T23:59:59.000Z

    This invention resulted from a contract with the United States Department of Energy and relates to a mining tool. More particularly, the invention relates to an assembly capable of drilling a hole having a square cross-sectional shape with radiused corners. In mining operations in which conventional auger-type drills are used to form a series of parallel, cylindrical holes in a coal seam, a large amount of coal remains in place in the seam because the shape of the holes leaves thick webs between the holes. A higher percentage of coal can be mined from a seam by a means capable of drilling holes having a substantially square cross section. It is an object of this invention to provide an improved mining apparatus by means of which the amount of coal recovered from a seam deposit can be increased. Another object of the invention is to provide a drilling assembly which cuts corners in a hole having a circular cross section. These objects and other advantages are attained by a preferred embodiment of the invention.

  20. Data Mining: Concepts and Techniques

    E-Print Network [OSTI]

    Geldenhuys, Jaco

    1 Data Mining: Concepts and Techniques (3rd ed.) -- Chapter 3 -- Jiawei Han, Micheline Kamber. All rights reserved. #12;2013/08/12 2 #12;33 Chapter 3: Data Preprocessing n Data Preprocessing: An Overview n Data Quality n Major Tasks in Data Preprocessing n Data Cleaning n Data Integration n Data

  1. Image Mining: Detecting Deforestation Patterns

    E-Print Network [OSTI]

    Camara, Gilberto

    54 Chapter IV Image Mining: Detecting Deforestation Patterns Through Satellites Marcelino Pereira to analyze satellite images and extract knowledge from this kind of data. The Amazonia deforestation problem of change on deforested areas of Amazonia. The purpose of the authors is to present relevant technologies

  2. Speedy backfilling for old mines

    SciTech Connect (OSTI)

    Dyni, R.C. (Bureau of Mines, Philadelphia, PA (United States)); Burnett, M. (Burnett Associates, Inc., Farmingham, MA (United States))

    1993-09-01T23:59:59.000Z

    This article describes pneumatic equipment that can help fill the underground voids left by abandoned coal mines that threaten nearly half a million acres of densely populated urban areas in the US alone. In 1910, when coal was king in northeastern Pennsylvania, engineers built a 600 ft cut-and-cover tunnel to transport coal from a mine entrance to a rail siding in the town of Vandling. In December 1992, engineers filled it up. The tunnel, known as the Hillside Coal and Iron Slope, had been well designed and constructed. Where it crossed under a main road, the roof was reinforced by three concrete columns--protection against loads from trolley cars whose rails shared the road. In October 1991, a hole opened up in one of the town's roads, and a subsidence complaint brought investigators from the US Department of the Interior's Office of Surface Mining (OSM) in Wilkes Barre, Pa. The tunnel, which passes directly underneath several of Vandling's residential streets as well as State Highway 171, was declared a potential hazard. The OSM engineers decided that complete backfilling was necessary to support the tunnel roof. After remediating the original subsidence hole, they contacted the US Bureau of Mines and offered the tunnel as a field demonstration site for two new pneumatic backfilling devices. The demonstration, a success, completely filled the tunnel in only 23 working days.

  3. Semi autonomous mine detection system

    SciTech Connect (OSTI)

    Douglas Few; Roelof Versteeg; Herman Herman

    2010-04-01T23:59:59.000Z

    CMMAD is a risk reduction effort for the AMDS program. As part of CMMAD, multiple instances of semi autonomous robotic mine detection systems were created. Each instance consists of a robotic vehicle equipped with sensors required for navigation and marking, a countermine sensors and a number of integrated software packages which provide for real time processing of the countermine sensor data as well as integrated control of the robotic vehicle, the sensor actuator and the sensor. These systems were used to investigate critical interest functions (CIF) related to countermine robotic systems. To address the autonomy CIF, the INL developed RIK was extended to allow for interaction with a mine sensor processing code (MSPC). In limited field testing this system performed well in detecting, marking and avoiding both AT and AP mines. Based on the results of the CMMAD investigation we conclude that autonomous robotic mine detection is feasible. In addition, CMMAD contributed critical technical advances with regard to sensing, data processing and sensor manipulation, which will advance the performance of future fieldable systems. As a result, no substantial technical barriers exist which preclude – from an autonomous robotic perspective – the rapid development and deployment of fieldable systems.

  4. Panel data analysis of U.S. coal productivity

    E-Print Network [OSTI]

    Stoker, Thomas M.

    2000-01-01T23:59:59.000Z

    We analyze labor productivity in coal mining in the United States using indices of productivity change associated with the concepts of panel data modeling. This approach is valuable when there is extensive heterogeneity ...

  5. Productivity improvement for longwall development

    SciTech Connect (OSTI)

    Whipkey, K. [Norwest, Ashland, KY (United States)

    2005-08-01T23:59:59.000Z

    Industry survey reveals coal operators thoughts about the use of different techniques to keep development ahead of longwall production. Factors considered that can optimise productivity include mine design (the number of entries, size of pillars etc.), work schedules, preventative maintenance programs and good management. The article was adapted from a presentation to Longwall USA 2005, in June 2005 (Pittsburgh, PA, USA). 3 figs.

  6. DETECTION OF EVENTS CAUSING PLUGGAGE OF A COAL-FIRED BOILER: A DATA MINING

    E-Print Network [OSTI]

    Kusiak, Andrew

    DETECTION OF EVENTS CAUSING PLUGGAGE OF A COAL-FIRED BOILER: A DATA MINING APPROACH ANDREW KUSIAK to analyze events leading to plug- gage of a boiler. The proposed approach involves statistics, data. The proposed approach has been tested on a 750 MW commercial coal-fired boiler affected with an ash fouling

  7. CHARACTERISATION OF ACID MINE DRAINAGE USING A COMBINATION OF HYDROMETRIC, CHEMICAL AND

    E-Print Network [OSTI]

    Williams, Mark W.

    to affect stream water quality throughout the western United States. Traditional remediation, involving which produced gold, silver, copper, lead and zinc from 1870 to 1951. Source waters and flowpaths within the mine were characterised using analysis of hydrogen and oxygen isotopes of water (water isotopes

  8. Prediction of buried mine-like target radar signatures using wideband electromagnetic modeling

    SciTech Connect (OSTI)

    Warrick, A.L.; Azevedo, S.G.; Mast, J.E.

    1998-04-06T23:59:59.000Z

    Current ground penetrating radars (GPR) have been tested for land mine detection, but they have generally been costly and have poor performance. Comprehensive modeling and experimentation must be done to predict the electromagnetic (EM) signatures of mines to access the effect of clutter on the EM signature of the mine, and to understand the merit and limitations of using radar for various mine detection scenarios. This modeling can provide a basis for advanced radar design and detection techniques leading to superior performance. Lawrence Livermore National Laboratory (LLNL) has developed a radar technology that when combined with comprehensive modeling and detection methodologies could be the basis of an advanced mine detection system. Micropower Impulse Radar (MIR) technology exhibits a combination of properties, including wideband operation, extremely low power consumption, extremely small size and low cost, array configurability, and noise encoded pulse generation. LLNL is in the process of developing an optimal processing algorithm to use with the MIR sensor. In this paper, we use classical numerical models to obtain the signature of mine-like targets and examine the effect of surface roughness on the reconstructed signals. These results are then qualitatively compared to experimental data.

  9. Relations between health indicators and residential proximity to coal mining in West Virginia

    SciTech Connect (OSTI)

    Hendryx, M.; Ahern, M.M. [West Virginia University, Morgantown, WV (United States). Dept. for Community Medicine

    2008-04-15T23:59:59.000Z

    We used data from a survey of 16493 West Virginians merged with county-level coal production and other covariates to investigate the relations between health indicators and residential proximity to coal mining. Results of hierarchical analyses indicated that high levels of coal production were associated with worse adjusted health status and with higher rates of cardiopulmonary disease, chronic obstructive pulmonary disease, hypertension, lung disease, and kidney disease. Research is recommended to ascertain the mechanisms, magnitude, and consequences of a community coal-mining exposure effect.

  10. Mine-induced sinkholes over the U.S. Strategic Petroleum Reserve (SPR) storge facility

    SciTech Connect (OSTI)

    Neal, J.T.; Bauer, S.J.; Ehgartner, B.L.

    1995-12-31T23:59:59.000Z

    The initial sinkhole at the Weeks Island SPR site that was first observed in May 1992 gradually enlarged and deepened, concurrent with the increasing dissolution of salt over the mined oil storage area below. Beginning in 1994 and continuing to the present, the injection of saturated brine directly into the sinkhole throat some 76 in (250 ft) beneath the surface essentially arrested further dissolution, buying time to make adequate preparation for the safe and orderly transfer of crude oil to other storage facilities. A second and much smaller sinkhole was first noticed in early 1995 on an opposite edge of the SPR mine, but with a very similar geological and mine mechanics setting. Both sinkholes occur where the edges of upper-152 in (-500 ft) and lower-213 m (-700 ft) storage levels are nearly vertically aligned. Such coincidence maximizes the tensional stress development leading to fracturing in the salt. Such cracking takes years to develop, perhaps 20 or more. The cracks then become flowpaths for brine incursion, wherein after time it is released into mined openings. Undersaturated ground water gradually enlarges the cracks in salt, leading to further dissolution and eventual collapse of the overlying sand to form sinkholes. Other geologic conditions may have been secondary factors in controlling both mining extent and sinkhole location. An en echelon alignment of sinkholes over other mine edges has been observed. Thus most likely areas of future occurrence at Weeks Island are adjacent to the existing sinkholes; surface inspections are now concentrated at those locations. Although neither timing nor location is predictable with precision, the study of numerous sinkholes elsewhere shows that progression is inevitable, provided that relevant conditions and enough time exists for development. These principles should provide mine designers and operators the knowledge to minimize the occurrence of sinkholes, and to plan for their progression when they occur.

  11. Legacy of historic mining and water quality in a heavily mined Scottish river catchment 

    E-Print Network [OSTI]

    Haunch, Simon

    2013-11-28T23:59:59.000Z

    Mine abandonment and the discharge of contaminated mine water is recognised globally as a major source of surface water and groundwater pollution. Contamination generally arises from the oxidation of sulphide minerals, ...

  12. Injury experience in stone mining, 1992

    SciTech Connect (OSTI)

    Not Available

    1994-05-01T23:59:59.000Z

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of stone mining in the United States for 1992. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  13. Oil Shale Mining Claims Conversion Act. Hearing before the Subcommittee on Mineral Resources Development and Production of the Committee on Energy and Natural Resources, United States Senate, One Hundredth Congress, Second Session on S. 2089, H. R. 1039, April 22, 1988

    SciTech Connect (OSTI)

    Not Available

    1988-01-01T23:59:59.000Z

    The hearing was called to examine two bills which address the processing of oil shale mining claims and patents by the Department of the Interior under the General Mining Law of 1872. S.2089 would provide for certain requirements relating to the conversion of oil shale mining claims located under the Mining Law of 1872 to leases and H.R.1039 would amend section 37 of the Mineral Lands Leasing Act of 1920 relating to oil shale claims. Under the new bills the owners of oil shale mining claims must make an election within 180 days after enactment as to whether to convert their claims to leases or to maintain their claims by performing 1000 dollars of annual assessment work on the claim, filing annually an affidavit of assessment work performed, and producing oil shale in significant marketable amounts within 10 years from the date of enactment of the legislation.

  14. Institut Mines-Tlcom EPOC : Energy Proportional

    E-Print Network [OSTI]

    Lefèvre, Laurent

    ? ? Renewable energy #12;Institut Mines-Télécom29/11/13 Green@Days Lille 28-29 Novembre 2013 Problem 5 time Workload Renewable energy ? ? regular electric #12;Institut Mines-Télécom29/11/13 Green@Days Lille 28Institut Mines-Télécom EPOC : Energy Proportional and Opportunistic Computing system 1 Labex Comin

  15. THE DEVELOPMENT OF SYNTHETIC SOIL MATERIALS FOR THE SUCCESSFUL RECLAMATION OF ABANDONED MINED LAND SITES

    SciTech Connect (OSTI)

    Song Jin

    2006-03-01T23:59:59.000Z

    Abandoned mine sites associated with coal and metal mining across the western United States have been left as unproductive wastelands. The availability of soil materials or other materials to support the restoration of the vegetative cover and enhance the recovery of such areas is limited. The restoration of these areas often requires the use of available amendments such as organic waste products or to help stabilize the soil. Many of the organic waste products, including sewage sludge, clarifier sludge, fly ash sludge, and other by-products from the agricultural industries such as compost can be employed for beneficial uses. This study looked at the feasibility of applying organic waste products to a mine soil in Montana to increase soil fertility and enhance plant productivity. Waste rock samples were tested for acid forming potential via acid base accounting. Samples cores were constructed and leached with simulated rainwater to determine amendment affect on metal leaching. A greenhouse study was completed to determine the most suitable amendment(s) for the field mine land site. Results from the acid base accounting indicate that acid formed from the waste rock would be neutralized with the alkalinity in the system. Results also show that metals in solution are easily held by organics from the amendments and not allowed to leach in to the surrounding water system. Data from the greenhouse study indicated that the amendment of sewage sludge was most promising. Application of 2% sewage sludge along with 1% sewage sludge plus 1% clarifier sludge, 2% compost, and no treatment were used for mine land application. Initial results were encouraging and it appears that sewage sludge may be a good reclamation option for mine lands.

  16. Data Mining: Concepts and TechniquesFebruary 19, 2008 1 Data Mining

    E-Print Network [OSTI]

    Raghavan, Vijay

    Data Mining: Concepts and TechniquesFebruary 19, 2008 1 Data Mining: Concepts and Techniques.cs.uiuc.edu/~hanj ©2006 Jiawei Han and Micheline Kamber, All rights reserved #12;Data Mining: Concepts and TechniquesFebruary 19, 2008 2 Chapter 2: Data Preprocessing Why preprocess the data? Descriptive data summarization

  17. LLM Oil, Gas and Mining Law Module Information: Oil, Gas and Mining Investment Law I and

    E-Print Network [OSTI]

    Evans, Paul

    LLM Oil, Gas and Mining Law Module Information: Oil, Gas and Mining Investment Law I and Oil, Gas and Mining Investment Law II Overview & Aims: This core module aims to introduce students to the political economy background as well as the international legal framework for transnational foreign investment

  18. Mercury Contamination from Hydraulic Placer-Gold Mining in the Dutch Flat Mining

    E-Print Network [OSTI]

    179 Mercury Contamination from Hydraulic Placer-Gold Mining in the Dutch Flat Mining District, California By Michael P. Hunerlach, James J. Rytuba, and Charles N. Alpers ABSTRACT Mercury contamination mercury (quicksilver) was used extensively for the recovery of gold at both placer and hardrock mines

  19. Colorado School of Mines Undergraduate Bulletin 2001-2002 1 School of Mines

    E-Print Network [OSTI]

    Colorado School of Mines Undergraduate Bulletin 2001-2002 1 Colorado School of Mines 2001 ­ 2002 Undergraduate Bulletin #12;2 Colorado School of Mines Undergraduate Bulletin 2001-2002 To CSM Students This Bulletin is for your use as a source of continuing reference. Please save it. Published by Colorado School

  20. Colorado School of Mines Undergraduate Bulletin 1999-2000 1 School of Mines

    E-Print Network [OSTI]

    Colorado School of Mines Undergraduate Bulletin 1999-2000 1 Colorado School of Mines 1999-2000 Undergraduate Bulletin #12;2 Colorado School of Mines Undergraduate Bulletin 1999-2000 To CSM Students This Bulletin is for your use as a source of continuing reference. Please save it. Published by Colorado School

  1. THE IMPACT OF A URANIUM MINING SITE ON THE STREAM SEDIMENTS (CRUCEA MINE, ROMANIA)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    THE IMPACT OF A URANIUM MINING SITE ON THE STREAM SEDIMENTS (CRUCEA MINE, ROMANIA) Petrescu L. 1 , Bilal E. 2 , Iatan L.E. 1 1 University of Bucharest, Faculty of Geology et Geophysics, Department methods were used to evaluate the impact of uranium mine dumps on the stream sedi- ments from Crucea

  2. Interstate Mining Compact Commission (multi-state)

    Broader source: Energy.gov [DOE]

    The Interstate Mining Compact is a multi-state governmental agency / organization that represents the natural resource and related environmental protection interests of its member states. Currently...

  3. Oil shale mining studies and analyses of some potential unconventional uses for oil shale

    SciTech Connect (OSTI)

    McCarthy, H.E.; Clayson, R.L.

    1989-07-01T23:59:59.000Z

    Engineering studies and literature review performed under this contract have resulted in improved understanding of oil shale mining costs, spent shale disposal costs, and potential unconventional uses for oil shale. Topics discussed include: costs of conventional mining of oil shale; a mining scenario in which a minimal-scale mine, consistent with a niche market industry, was incorporated into a mine design; a discussion on the benefits of mine opening on an accelerated schedule and quantified through discounted cash flow return on investment (DCFROI) modelling; an estimate of the costs of disposal of spent shale underground and on the surface; tabulation of potential increases in resource recovery in conjunction with underground spent shale disposal; the potential uses of oil shale as a sulfur absorbent in electric power generation; the possible use of spent shale as a soil stabilizer for road bases, quantified and evaluated for potential economic impact upon representative oil shale projects; and the feasibility of co-production of electricity and the effect of project-owned and utility-owned power generation facilities were evaluated. 24 refs., 5 figs., 19 tabs.

  4. (Data in metric tons of silver content, unless otherwise noted)1 Domestic Production and Use: Silver, produced by about 76 mines in 16 States, had an estimated value of $338

    E-Print Network [OSTI]

    ,8002 Shipments from Government stockpile excesses 186 220 232 109 250 Consumption, apparent NA NA NA 4,980 5 and technical uses. Industrial and technical uses include photographic materials, electrical products, catalysts NA 1,360 1,700 Imports for consumption 2,600 3,250 3,010 2,540 2,6002 Exports 967 2,890 2,950 3,080 3

  5. Emissions and Durability of Underground Mining Diesel Particulate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Durability of Underground Mining Diesel Particulate Filter Applications Emissions and Durability of Underground Mining Diesel Particulate Filter Applications Presentation given...

  6. COST AND SCHEDULE FOR DRILLING AND MINING UNDERGROUND TEST FACILITIES

    E-Print Network [OSTI]

    Lamb, D.W.

    2013-01-01T23:59:59.000Z

    Waste Storage in Mined Caverns in Crystalline Rock, LBL-Waste Storage in Mined Caverns in Crystalline Rock, LBL-for additional shaft and cavern support and stabilization.

  7. Reclamation of Land Used for Mineral Mining (Virginia)

    Broader source: Energy.gov [DOE]

    This legislation aims to provide for the rehabilitation and conservation of land affected by the mining of minerals through proper planning, proper use of appropriate methods of mining,...

  8. Mines Welcomes Middle School Students | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Science and Technology. The students spent the day at Mines to learn about Earth, energy, the environment, critical materials and mining. The students enjoyed a chemistry show...

  9. Virginia Coal Surface Mining Control and Reclamation Act (Virginia)

    Broader source: Energy.gov [DOE]

    This legislation implements the federal Surface Mining Control and Reclamation Act and establishes a statewide regulatory program for reclamation following coal surface mining activities. The...

  10. Occupational health and safety regulation in the coal mining industry: public health at the workplace

    SciTech Connect (OSTI)

    Weeks, J.L. (Department of Occupational Health and Safety, United Mine Workers of America, Washington, DC (USA))

    1991-01-01T23:59:59.000Z

    The strategy for preventing occupational disease and injury in the coal mining industry employs several elements. Standards are set and enforced; technical assistance, research, and development are provided; and surveillance is conducted. Compensation for black lung is a vivid reminder of the consequences of failure to prevent disease. And, workers are represented by a union that encourages active participation in all aspects of this strategy. There are significant problems in each of these elements. Regulatory reform threatens to weaken many standards, there is a decline in government research budgets, surveillance is not well monitored, and compensation for black lung is significantly more difficult to obtain now than in the past. Moreover, the conservative governments of the past decade are not friendly towards unions. Nevertheless, the fundamental structure of disease and injury prevention remains intact and, more importantly, it has a historical record of success. The Mine Safety and Health Act provided for a wide array of basic public health measures to prevent occupational disease and injury in the mining industry. These measures have been effective in reducing both risk of fatal injury and exposure to respirable coal mine dust. They are also associated with temporary declines in productivity. In recent years, however, productivity has increased, while risk of fatal injury and exposure to respirable dust have declined. At individual mines, productivity with longwall mining methods appear to be associated with increases in exposure to respirable dust. These trends are not inconsistent with similar trends following implementation of regulations by OSHA. When OSHA promulgated regulations to control exposure to vinyl chloride monomer, enforcement of the standard promoted significant efficiencies in vinyl chloride production (5).21 references.

  11. Data mining for ontology development.

    SciTech Connect (OSTI)

    Davidson, George S.; Strasburg, Jana (Pacific Northwest National Laboratory, Richland, WA); Stampf, David (Brookhaven National Laboratory, Upton, NY); Neymotin,Lev (Brookhaven National Laboratory, Upton, NY); Czajkowski, Carl (Brookhaven National Laboratory, Upton, NY); Shine, Eugene (Savannah River National Laboratory, Aiken, SC); Bollinger, James (Savannah River National Laboratory, Aiken, SC); Ghosh, Vinita (Brookhaven National Laboratory, Upton, NY); Sorokine, Alexandre (Oak Ridge National Laboratory, Oak Ridge, TN); Ferrell, Regina (Oak Ridge National Laboratory, Oak Ridge, TN); Ward, Richard (Oak Ridge National Laboratory, Oak Ridge, TN); Schoenwald, David Alan

    2010-06-01T23:59:59.000Z

    A multi-laboratory ontology construction effort during the summer and fall of 2009 prototyped an ontology for counterfeit semiconductor manufacturing. This effort included an ontology development team and an ontology validation methods team. Here the third team of the Ontology Project, the Data Analysis (DA) team reports on their approaches, the tools they used, and results for mining literature for terminology pertinent to counterfeit semiconductor manufacturing. A discussion of the value of ontology-based analysis is presented, with insights drawn from other ontology-based methods regularly used in the analysis of genomic experiments. Finally, suggestions for future work are offered.

  12. WEB MINING: A ROADMAP Magdalini Eirinaki

    E-Print Network [OSTI]

    Eirinaki, Magdalini

    1 WEB MINING: A ROADMAP Magdalini Eirinaki Dept. of Informatics Athens University of Economics and Business CHAPTER 1 Introduction ­ The three axes of Web Mining 1.1 WWW Impact The World Wide Web, has grown of the Web content, the creation of some meta- knowledge out of the information which is available on the Web

  13. High Performance Subgraph Mining in Molecular Compounds

    E-Print Network [OSTI]

    Reiterer, Harald

    High Performance Subgraph Mining in Molecular Compounds Giuseppe Di Fatta1,2 and Michael R data makes distributed graph mining techniques particularly relevant. In this paper, we present method has been evaluated on the well-known National Cancer Institute's HIV-screening dataset, where

  14. ANALYSIS OF MINING EXPLOSION PERFORMANCE WITH MULTIPLE

    E-Print Network [OSTI]

    Stump, Brian W.

    Limitations of Video Data · Effect of Blast Design on Near-Source Seismograms · Different Types of Cast Blasts of Models in Visualization ß Two-Dimensional Blast Model ß Three-Dimensional Blast Models 3. Applications to Different Types of Mining Explosions · Single Shot · Cast Blast · Coal Fragmentation #12;Analysis of Mining

  15. COLORADO SCHOOL OF MINES COUNSELING CENTER

    E-Print Network [OSTI]

    NOTICE OF PRIVACY PRACTICES COLORADO SCHOOL OF MINES COUNSELING CENTER THIS NOTICE DESCRIBES HOW be revoked at any time in writing delivered to the Director, Counseling Center, except to the extent Colorado restrictions on the use and disclosure of medical information about you; however, Colorado School of Mines CC

  16. The Neon DSEL for mining Helium programs

    E-Print Network [OSTI]

    Utrecht, Universiteit

    studies We consider three case studies to illustrate how Neon can be used to data mine the collectionThe Neon DSEL for mining Helium programs Jurriaan Hage Peter van Keeken Department of Information and Computing Sciences, Utrecht University Technical Report UU-CS-2007-023 www.cs.uu.nl ISSN: 0924-3275 #12

  17. INFRASTRUCTURE FOR INTEGRATED DATA ENVIRONMENTS AND ANALYSIS (IIDEA) FOR MINING AND PROCESSING SYSTEMS

    SciTech Connect (OSTI)

    Dessureault, Sean

    2007-06-29T23:59:59.000Z

    Almost all the high-production businesses face a problem of having terabytes of data but very little information is extracted from them. Efforts are being made continuously to bring the raw data into a usable format so that the meaningful information can be inferred. Once the knowledge discovery is done, proper action can be taken accordingly. The data mining and process modeling approach are used in many business sectors to better understand the process interactions within production chains by analyzing huge data repositories. A decade of intense investment in information technology by mining companies as resulted in vast quantities of underutilized data. Other industries have undergone fundamental changes through the innovative application of IT and business intelligence. This project was to undertake the investigation of the tools and techniques that would bring such data mining and requisite business processes to the mining industry. Phase I of this project was to establish the research infrastructure for Phase II and to pilot the tools and techniques through the development of an Energy Consumption Model (ECM) to predict the energy consumption in the material handling processes based on the key input variables like distance, elevation, tons hauled etc. Data mining techniques that can extract meaningful information from a raw data is available. The model developed as part of this research is an example of how energy consumption can be estimated from fundamental data.

  18. Reason, Risk and Rights: Toxins and Pollutants Lead in paint

    E-Print Network [OSTI]

    Callender, Craig

    contain many toxic chemicals...inhaled · combustion of chlorine products often leads to formation of HCl and dioxin, both of which are released into air and water · products leak, drip, break..e.g., light up chemicals · pesticides -- 500 active ingredients · 11,700 consumer products -- 1010 chemicals · electronics

  19. Uranium mine and mill tailings - Liabilities in the European Union

    SciTech Connect (OSTI)

    Hilden, Wolfgang; Murphy, Simon [European Commission, Maison de l'Europe, L-2920 (Luxembourg); Vrijen, Jan [KARUWEEG BV, Leliendaalsedreef 9, 4333 JZ Middelburg (Netherlands)

    2007-07-01T23:59:59.000Z

    Available in abstract form only. Full text of publication follows: Uranium mining and milling has taken place on large scale in the Member States of the European Union (EU) for some 60 years. Although, compared to mining, milling activities are normally concentrated in fewer locations, this can still result in a relatively large number of disposal sites for the tailings, compared to other radioactive wastes. In addition these sites are also quite large, in terms of both volume and surface area. Coupled with the residual uranium in the tailings together with other radionuclides, heavy metals, chemicals etc this results in an environmental legacy continuing far into the future. Often during production no or little provision has been made for the closure, remediation and future supervision of such sites. In 1996 the European Commission funded an inventory of uranium mining and milling liabilities in nine Central and Eastern European Countries. Additionally, pilot projects were funded to carry out remediation activities at several sites. Almost ten years later the Commission has identified the need to address the situation of these large liabilities in all EU Member States and to assess the progress made in remediation of the sites, especially in view of the closure of almost all mining activities in Europe. The Commission study has identified the current tailings liabilities in Europe, their status, the future plans for these sites and the hazards that continue to be associated with them. It is clear that although considerable progress has been made in recent years, much work remains to be carried out in the areas of remediation, and ensuring the long-term safety of many of the identified objects. The paper presents the main findings of the study, as well as the challenges identified to ensure long-term safety of these wastes. (authors)

  20. Computer-Aided Visual Assessment in Mine Planning and Design1

    E-Print Network [OSTI]

    Standiford, Richard B.

    Colorado and in Four Corners, New Mexico. We are actively seeking opportunities to develop additional operations around the world. Our mineral products include copper, iron ore, uranium, and coal. Uranium is pro- duced through a wholly--owned subsidiary. Our producing domestic coal mines are located in northwestern

  1. Study of the properties of mine waste in the midwestern coal fields. Phase I report

    SciTech Connect (OSTI)

    None

    1980-07-04T23:59:59.000Z

    In an effort to assist the coal industry in complying with the applicable regulations, to design safe and environmentally acceptable disposal systems, and to encourage secondary use of coal mine waste, the US Department of Energy has initiated research programs to develop coal mine waste disposal and use technology. This study of the properties of mine wastes in the Midwestern coal fields has been limited to the waste materials obtained from underground coal mines and preparation plants attached to both underground and surface mines. The program has been divided into two phases. In Phase I, the 20 most important properties relevant to safe disposal, reclamation, underground disposal, and secondary uses have been identified. An inventory of the significant waste disposal sites in the Midwestern coal fields has been prepared. The site locations have been plotted on USGS maps. Estimates of coal production and coal mine waste production during the next 2 decades have been prepared and are presented in this report. Also, all available information obtained from a search of existing literature on physical and chemical properties, including analysis results of the general runoff from the refuse disposal areas, has been collected and is presented. In order to fill the gaps in information, 20 sites have been identified for drilling and sampling to determine the various physical and chemical properties. They have been selected on the basis of the distribution and quantity of waste at the existing locations (both abandoned and active), the future trends in production and likely locations of waste disposal areas, their geographical and geological distribution, and ease of accessibility for drilling and sampling.

  2. Breakthrough: Lead-free Solder

    ScienceCinema (OSTI)

    Anderson, Iver

    2013-03-01T23:59:59.000Z

    Ames Laboratory senior metallurgist Iver Anderson explains the importance of lead-free solder in taking hazardous lead out of the environment by eliminating it from discarded computers and electronics that wind up in landfills. Anderson led a team that developed a tin-silver-copper replacement for traditional lead-tin solder that has been adopted by more than 50 companies worldwide.

  3. Breakthrough: Lead-free Solder

    SciTech Connect (OSTI)

    Anderson, Iver

    2012-01-01T23:59:59.000Z

    Ames Laboratory senior metallurgist Iver Anderson explains the importance of lead-free solder in taking hazardous lead out of the environment by eliminating it from discarded computers and electronics that wind up in landfills. Anderson led a team that developed a tin-silver-copper replacement for traditional lead-tin solder that has been adopted by more than 50 companies worldwide.

  4. Off Earth Mining Forum 19-21 February 2013

    E-Print Network [OSTI]

    Sekercioglu, Y. Ahmet

    1 Off Earth Mining Forum 19-21 February 2013 www.acser.unsw.edu.au/oemf Never Stand Still Faculty of Engineering Australian Centre for Space Engineering Research (ACSER) #12;Off Earth Mining Forum, UNSW, Sydney Australia's place in space. Off Earth Mining Forum Sponsors Off Earth Mining Forum The prospect of people

  5. A Fast Algorithm for Data Mining CS 297 Report

    E-Print Network [OSTI]

    Pollett, Chris

    A Fast Algorithm for Data Mining CS 297 Report Aarathi Raghu Advisor: Dr.Chris Pollett December 2005 #12;A Fast Algorithm For Data Mining Abstract This report describes the data mining algorithms implemented and lessons learned during the course of my CS 297. Data Mining is a growing field and a plethora

  6. Semantic Analysis of Role Mining Results and Shadowed Roles Detection

    E-Print Network [OSTI]

    Garcia-Alfaro, Joaquin

    . These techniques get inspiration from data mining techniques, hence, they are known as role mining (RM). Several eSemantic Analysis of Role Mining Results and Shadowed Roles Detection Safa`a Hachanaa,c , Fr, Email: safa@swid.fr bInstitut Telecom-Mines/Telecom Bretagne, D´ept. LUSSI, Rennes, France Emails

  7. Mining patterns of events in students' teamwork data

    E-Print Network [OSTI]

    Zaiane, Osmar R.

    Mining patterns of events in students' teamwork data Judy Kay, Nicolas Maisonneuve, Kalina Yacef the electronic traces of their collaborations. The paper describes data mining of student group interaction data quantities, preprocessing it into a suitable alphabet for use in data mining. Then, we need data mining

  8. Method of underground mining by pillar extraction

    DOE Patents [OSTI]

    Bowen, Ray J. (1879 Delann, Salt Lake City, UT 84121); Bowen, William R. (1636 Sunnydale La., Salt Lake City, UT 84108)

    1980-08-12T23:59:59.000Z

    A method of sublevel caving and pillar and top coal extraction for mining thick coal seams includes the advance mining of rooms and crosscuts along the bottom of a seam to a height of about eight feet, and the retreat mining of the top coal from the rooms, crosscuts and portions of the pillars remaining from formation of the rooms and cross-cuts. In the retreat mining, a pocket is formed in a pillar, the top coal above the pocket is drilled, charged and shot, and then the fallen coal is loaded by a continuous miner so that the operator remains under a roof which has not been shot. The top coal from that portion of the room adjacent the pocket is then mined, and another pocket is formed in the pillar. The top coal above the second pocket is mined followed by the mining of the top coal of that portion of the room adjacent the second pocket, all by use of a continuous miner which allows the operator to remain under a roof portion which has not been shot.

  9. Environmental Health and Safety COLORADO SCHOOL OF MINES Colorado School of Mines GOLDEN, COLORADO 80401-1887

    E-Print Network [OSTI]

    Environmental Health and Safety COLORADO SCHOOL OF MINES Colorado School of Mines GOLDEN, COLORADO AND REMEDIATION PROJECT - SOUTH SIDE OF CLEAR CREEK Dear Mr. Glueck: The Colorado School of Mines Research to the environmental project, the Colorado School of Mines has constructed road base improvements between Maple

  10. The Colorado School of Mines (Mines) Career Center supports the mission, academic programs, and advancement of the Colorado School

    E-Print Network [OSTI]

    TMS: TEYJS #12;M The Colorado School of Mines (Mines) Career Center supports the mission, academic programs, and advancement of the Colorado School of Mines. The CSM Career Center of CSM graduates and to the mission of CSM. All Colorado School of Mines graduates will be able

  11. Querying Multiple Sets of Discovered Rules Rule mining is an important data mining task that has been

    E-Print Network [OSTI]

    Liu, Bing

    operating on multiple rulebases because many practically important data mining queries naturally requireQuerying Multiple Sets of Discovered Rules ABSTRACT Rule mining is an important data mining task querying of multiple data mining rulebases to retrieve interesting rules. In this paper, we propose a new

  12. Remediation of inactive mining and milling sites

    SciTech Connect (OSTI)

    Mao, H.; Pan, Y.; Li, R.

    1993-12-31T23:59:59.000Z

    The presentation introduces relevant environment remediation standards and describes some measures of engineering remedied for inactive mines and mills. Since 1990, the remediation of decommissioned nuclear facilities has obtained fixed financial aid from state government, part of which is offered to inactive mines and mills. Considering the environmental characteristics of Chinese uranium mines and mills, the major task of decommissioning is to prevent radon release, and keep surface water and underground water from contamination. In order to control the rate of radon release effectively, the authors` research institutes conducted a series of experiments on the covers of tailings with two kinds of different material, clay and concrete.

  13. STPMiner: A Highperformance Spatiotemporal Pattern Mining Toolbox

    SciTech Connect (OSTI)

    Vatsavai, Raju [ORNL] [ORNL

    2011-01-01T23:59:59.000Z

    The volume of spatiotemporal data being generated from scientific simulations and observations from sensors is growing at an astronomical rate. This data explosion is going to pose three challenges to the existing data mining infrastructure: algorithmic, computational, and I/O. Over the years we have implemented several spatiotemporal data mining algorithms including: outliers/anomalies, colocation patterns, change patterns, clustering, classification, and prediction algorithms. In this paper we briefly discuss the core spatiotemporal pattern mining algorithms along with some of the computational and I/O challenges associated with the big data.

  14. Colorado SChool of MineS We are Colorado School of Mines. Full of pride in our distinguished

    E-Print Network [OSTI]

    that are not trademarked have been eliminated. Too many visual symbols dilute and weaken Mines' identity in our marketing, Energy, Materials and Environment. This Graphic Standards Guide sets forth the trademarked logos -- both

  15. Mercury Methylation in Mine Wastes Collected from Abandoned Mercury Mines in the USA

    SciTech Connect (OSTI)

    Gray, John E. (U.S. Geological Survey); Hines, Mark E. (Massachusetts, Univ Of); Biester, Harald (Heidelberg College); Lasorsa, Brenda K. (BATTELLE (PACIFIC NW LAB))

    2003-05-01T23:59:59.000Z

    Mercury mines contain highly elevated Hg contents, but more problematic environmentally are elemental Hg and soluble Hg salts produced during ore retorting that remain in wastes at mine sites. Under certain conditions, these inorganic Hg compounds convert to bioavailable, highly toxic organic Hg forms. Speciation and transformation of Hg was studied in wastes collected from abandoned Hg mines at McDermitt, NV, and Terlingua, TX, which are moderate size on an international scale and produced about 10,000 and 5,000 t of elemental Hg, respectively. In waste samples, we measured total Hg and methyl-Hg contents, identified various Hg compounds using Hg-thermo-desorption pyrolysis, and determined rates of Hg methylation and methyl-Hg demethylation using isotopic-tracer methods. Pyrolysis analysis of mine wastes showed variable amounts of cinnabar, metacinnabar, Hg salts, elemental Hg, and elemental Hg sorbed onto particulates such as clay and Fe-oxides. Mine wastes with the highest methyl-Hg contents correspond to those with elemental Hg and particulate-sorbed elemental Hg, and also produced the highest laboratory-estimated potential Hg methylation rates, as much as 4.8%/day. Samples containing dominantly cinnabar showed little or no Hg methylation. Mine wastes with high methyl-Hg contents generally showed low methyl-Hg demethylation, suggesting that Hg methylation was dominant. Both mines are located in semiarid climates, and during this study, streambeds below the mines were dry. Total Hg contents in stream sediment collected below the mines show significant dilution, and methyl-Hg contents were typically below the limit of determination. Methylation of Hg downstream from Hg mines is probably lower in arid climates due to lack of mine-water runoff and lower microbial activity. The correspondence of mine wastes containing elemental Hg and high methyl-Hg contents suggests that Hg0 oxidizes to Hg2+, which is subsequently bioavailable for microbial Hg methylation.

  16. ITP Mining: Energy and Environmental Profile of the U.S. Mining...

    Broader source: Energy.gov (indexed) [DOE]

    objectives. Overburden Designates material of any nature, consolidated or unconsolidated, that overlies a deposit of useful materials, ores, oar coal that are mined from...

  17. Impact analysis of OSM regulations on highwall mining systems. Final report

    SciTech Connect (OSTI)

    Not Available

    1980-09-01T23:59:59.000Z

    The establishment of the federal surface mining performance standards has placed additional restraints on auger mining. The federal regulations impose barrier pillar and hole sealing requirements on augering, stipulate time frames for hole sealing and discharge treatment, and prohibit auger mining under certain conditions. Barrier pillar requirements between groups of auger holes and between auger holes and underground workings decrease the augerable reserve base on a site by a minimum of ten percent. Barrier requirements may also reduce productivity levels due to increased delay and scheduling problems. Federal auger hole sealing requirements are more stringent than most state regulations, and consequently have increased the cost of augering in almost all auger mining areas. The availability of impervious materials on the site and the extent of backfilling required to form a water-tight seal may have the greatest effect on auger hole reclamation costs. The federal regulations require auger mining to be prohibited: if adverse water quality impacts cannot be prevented; if stability of sealings cannot be achieved; if subsidence resulting from augering may damage powerlines, pipelines, buildings, or other facilities; or if coal reserve recovery is not maximized by augering. As a result, all up dip augering may be restricted on the grounds that seal stability cannot be maintained for long time periods if water pressure builds behind the plug. Also, since tradiational augering techniques have a lower recovery rate than surface or underground methods, augering may be prohibited in many situations by the stipulation that maximum resource recovery will not be achieved.

  18. Cost to the Indian economy of mining coal

    SciTech Connect (OSTI)

    Bansal, N.K.; Bhave, A. [Indian Inst. of Technology, New Delhi (India). Centre of Energy Studies

    1995-03-01T23:59:59.000Z

    Like steel production, energy production is one of the significant parameters of stage of advancement of a developing economy. Availability of energy at the right price is vital for development. Coal is a primary resource of energy. The price of coal has been a very important parameter in the Indian economy. In the past 20 years coal has been marketed at administered prices. There has been a very complex mechanism at work for this purpose. There have been a lot of incentives given to thin industry. These, in fact, are tantamount to subsidies. The role of subsidies is well acknowledged and is considered quite useful to the economy. A detailed analysis by carefully studying the methodology of mining and delineating various stages in mining has been conducted, and the subsidies, which have traditionally not been quantified, have been calculated The impact of each parameter on the total subsidy has been studied to facilitate continuance or change in the subsidy by adopting a suitable strategy for coal pricing, as presently the considerations show unaccounted-for subsidies to be more than 70% of the price charged.

  19. A Study of Lead Ingot Cargoes from Ancient Mediterranean Shipwrecks

    E-Print Network [OSTI]

    Brown, Heather Gail

    2011-10-21T23:59:59.000Z

    Lead is often relegated to a footnote or sidebar in the study of ancient metals. However, the hundreds of lead ingots discovered in underwater sites over the past half-century have attested to the widespread production and trade of this utilitarian...

  20. Fuelcell-Hybrid Mine loader (LHD)

    SciTech Connect (OSTI)

    James L Dippo; Tim Erikson; Kris Hess

    2009-07-10T23:59:59.000Z

    The fuel cell hybrid mine loader project, sponsored by a government-industry consortium, was implemented to determine the viability of proton exchange membrane (PEM) fuel cells in underground mining applications. The Department of Energy (DOE) sponsored this project with cost-share support from industry. The project had three main goals: (1) to develop a mine loader powered by a fuel cell, (2) to develop associated metal-hydride storage and refueling systems, and (3) to demonstrate the fuel cell hybrid loader in an underground mine in Nevada. The investigation of a zero-emissions fuel cell power plant, the safe storage of hydrogen, worker health advantages (over the negative health effects associated with exposure to diesel emissions), and lower operating costs are all key objectives for this project.

  1. civil engineering College of Engineering and Mines

    E-Print Network [OSTI]

    Hartman, Chris

    civil engineering College of Engineering and Mines Department of Civil and Environmental's degree program can include courses in environmental engineering, engineering management and other areas. An advanced degree in environmental engineering administered within the civil en- gineering department

  2. Georgia Surface Mining Act of 1968 (Georgia)

    Broader source: Energy.gov [DOE]

    This law regulates all surface mining in Georgia, including the coastal zone. It includes provisions to “advance the protection of fish and wildlife and the protection and restoration of land,...

  3. Analysis of Bitcoin Pooled Mining Reward Systems

    E-Print Network [OSTI]

    Rosenfeld, Meni

    2011-01-01T23:59:59.000Z

    In this paper we describe the various scoring systems used to calculate rewards of participants in Bitcoin pooled mining, explain the problems each were designed to solve and analyze their respective advantages and disadvantages.

  4. New approaches to weighted frequent pattern mining

    E-Print Network [OSTI]

    Yun, Unil

    2007-04-25T23:59:59.000Z

    Researchers have proposed frequent pattern mining algorithms that are more efficient than previous algorithms and generate fewer but more important patterns. Many techniques such as depth first/breadth first search, use of tree/other data structures...

  5. DATA MINING IN TELECOMMUNICATIONS Gary M. Weiss

    E-Print Network [OSTI]

    Weiss, Gary

    DATA MINING IN TELECOMMUNICATIONS Gary M. Weiss Department of Computer and Information Science Fordham University Abstract: Telecommunication companies generate a tremendous amount of data. These data include call detail data, which describes the calls that traverse the telecommunication networks, network

  6. Nonmetallic Mining Reclamation; Oil and Gas (Wisconsin)

    Broader source: Energy.gov [DOE]

    These regulations describe standards relevant to reclamation that must be followed both during and after the completion of mining in a given area. An operator who wishes to engage in nonmetallic...

  7. Surface Coal Mining and Reclamation (Indiana)

    Broader source: Energy.gov [DOE]

    The Indiana Department of Natural Resources implements and enforces the federal Surface Mining Control and Reclamation Act of 1977, as well as a statewide program to protect society and the...

  8. Coal Mining Regulatory and Reclamation Act (Massachusetts)

    Broader source: Energy.gov [DOE]

    These regulations aim to ensure that any coal mining or extraction will be conducted in a manner that will not significantly damage the environment or area of land affected. The Department of...

  9. ITP Mining: Mining Industry Roadmap for Crosscutting Technologies

    Broader source: Energy.gov (indexed) [DOE]

    and disposal of waste and products containing metals, long range transport of air pollutants, and agreements addressing other environmental concerns presage an increasing global...

  10. High temperature superconductor current leads

    DOE Patents [OSTI]

    Hull, J.R.; Poeppel, R.B.

    1995-06-20T23:59:59.000Z

    An electrical lead is disclosed having one end for connection to an apparatus in a cryogenic environment and the other end for connection to an apparatus outside the cryogenic environment. The electrical lead includes a high temperature superconductor wire and an electrically conductive material distributed therein, where the conductive material is present at the one end of the lead at a concentration in the range of from 0 to about 3% by volume, and at the other end of the lead at a concentration of less than about 20% by volume. Various embodiments are shown for groups of high temperature superconductor wires and sheaths. 9 figs.

  11. Dragline mining returns to western Kentucky

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2009-05-15T23:59:59.000Z

    Armstrong Coal Co. now owns three Page draglines-one now operating at the Midway Surface mine, one due to go into operation at the Equality surface mine and a third that is being rebuilt also for use there. Armstrong is banking on the economics of scale to once again prove that these older machines are still the most efficient way to move large volumes of overburden. 4 photos.

  12. Acoustic resonance for nonmetallic mine detection

    SciTech Connect (OSTI)

    Kercel, S.W.

    1998-04-01T23:59:59.000Z

    The feasibility of acoustic resonance for detection of plastic mines was investigated by researchers at the Oak Ridge National Laboratory`s Instrumentation and Controls Division under an internally funded program. The data reported in this paper suggest that acoustic resonance is not a practical method for mine detection. Representative small plastic anti-personnel mines were tested, and were found to not exhibit detectable acoustic resonances. Also, non-metal objects known to have strong acoustic resonances were tested with a variety of excitation techniques, and no practical non-contact method of exciting a consistently detectable resonance in a buried object was discovered. Some of the experimental data developed in this work may be useful to other researchers seeking a method to detect buried plastic mines. A number of excitation methods and their pitfalls are discussed. Excitation methods that were investigated include swept acoustic, chopped acoustic, wavelet acoustic, and mechanical shaking. Under very contrived conditions, a weak response that could be attributed to acoustic resonance was observed, but it does not appear to be practical as a mine detection feature. Transfer properties of soil were investigated. Impulse responses of several representative plastic mines were investigated. Acoustic leakage coupling, and its implications as a disruptive mechanism were investigated.

  13. Toward a Remotely-Manned Energy and Production Economy

    E-Print Network [OSTI]

    Minsky, Marvin

    1979-09-01T23:59:59.000Z

    We can solve many problems of Energy, Health, Productivity, and Environmental Quality by improving the technology of remote control. This will produce Nuclear Safety and Security, Advances in Mining, Increases in ...

  14. Investigation of GPS/IMU Positioning System for Mining Equipment

    SciTech Connect (OSTI)

    Ken L. Stratton

    2006-09-13T23:59:59.000Z

    The objective of this project is to investigate the applicability of a combined Global Positioning System and Inertial Measurement Unit (GPS/IMU) for information based displays on earthmoving machines and for automated earthmoving machines in the future. This technology has the potential of allowing an information-based product like Caterpillar's Computer Aided Earthmoving System (CAES) to operate in areas with satellite shading. Satellite shading is an issue in open pit mining because machines are routinely required to operate close to high walls, which reduces significantly the amount of the visible sky to the GPS antenna mounted on the machine. An inertial measurement unit is a product, which provides data for the calculation of position based on sensing accelerations and rotation rates of the machine's rigid body. When this information is coupled with GPS it results in a positioning system that can maintain positioning capability during time periods of shading.

  15. Acid-producing potential of the various lithic units associated with the mining of coal. Technical completion report

    SciTech Connect (OSTI)

    Renton, J.J.; Stiller, A.H.

    1986-01-01T23:59:59.000Z

    A collection of the seven different potentially toxic lithotypes encountered in the mining of coal were collected for five coals in 18 mines over a 5 county area in northern West Virginia for a total of 89 samples. Each sample was subjected to total sulfur analysis and to the soxhlet extraction/oven reoxidation procedure devised by the authors for the evaluation of an acid-production rate constant, alpha. The data show that the samples with the lowest sulfur contents have the highest acid production rate constants.

  16. LEADING ADULT SQUAWFISH (Ptychocheilus oregonensis)

    E-Print Network [OSTI]

    of Federal, State or cooperating agencies and in processed form for economy and to avoid delay in publicationLEADING ADULT SQUAWFISH (Ptychocheilus oregonensis) WITHIN AN ELECTRIC FIELD Marine Biological, Arnie J. Suomela, Commissioner LEADING ADULT SQUAWFISH ( PTYCHOCHEILUS OREGONENSIS ) WITHIN AN ELECTRIC

  17. MINING ENGINEERING AT McGILL Bachelor of Engineering in Mining Engineering

    E-Print Network [OSTI]

    Barthelat, Francois

    engineers have a solid foundation in math, chemistry, physics and geology.They enjoy taking research in Quebec, and oil sands mining in northern Alberta.Very importantly, all McGill engineering required courses in math, chemistry, physics, geology and mining. A co-op program, it includes four paid

  18. MINES-TELECOM INSTITUTE, MINES DOUAI RMOD INRIA LILLE NORD EUROPE

    E-Print Network [OSTI]

    Boyer, Edmond

    MINES-TELECOM INSTITUTE, MINES DOUAI RMOD INRIA LILLE NORD EUROPE TECHNICAL REPORT Extended results for this case. We succeed to reduce the application's size to 1% of its original counterpart. 1 FileStream startUp: true. 2 1 to: 10 do: [ :i | FileStream stdout nextPutAll: 'hello'; crlf ]. Figure 1: Entry point

  19. MINES-TELECOM INSTITUTE, MINES DOUAI RMOD INRIA LILLE NORD EUROPE

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    MINES-TELECOM INSTITUTE, MINES DOUAI RMOD INRIA LILLE NORD EUROPE TECHNICAL REPORT Tornado: A Run the application's size to 1% of its original counterpart. 1 FileStream startUp: true. 2 1 to: 10 do: [ :i | FileStream

  20. Introduction to Bitcoin Mining A Guide For Gamers, Geeks, and Everyone Else

    E-Print Network [OSTI]

    Shamos, Michael I.

    Introduction to Bitcoin Mining A Guide For Gamers, Geeks, and Everyone Else by David R. Sterry;Introduction to Bitcoin Mining Contents Introduction.....................................4 Why Start Mining...........................................................11 Creating New Bitcoins .......................................................12 Mining Hardware

  1. Introduction: Lessons Learned from Data Mining Applications and Collaborative Problem Solving

    E-Print Network [OSTI]

    Langley, Pat

    Introduction: Lessons Learned from Data Mining Applications and Collaborative Problem Solving Nada paper to the special issue on Data Mining Lessons Learned presents lessons from data mining applications. Keywords: data mining, machine learning, scientific discovery, lessons learned, applications, collaborative

  2. Mining Of Text In The Product Development Process

    E-Print Network [OSTI]

    Loh, Han Tong

    In the prevailing world economy, competition is keen and firms need to have an edge over their competitors for profitability and sometimes, even for the survival of the business itself. One way to help achieve this is the ...

  3. Automated genome mining of ribosomal peptide natural products...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of microbial RiPPs and apply it for lanthipeptide discovery. RiPPquest uses genomics to limit search space to the vicinity of RiPP biosynthetic genes and proteomics to...

  4. U.S. mine production of uranium, 1993-2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlong version) The U.S.1, 2014 U.S.gasoline prices

  5. Electrochemical behavior of lead telluride

    SciTech Connect (OSTI)

    Danilova, M.G.; Sveshnikova, L.L.; Repinskii, S.M.

    1987-07-01T23:59:59.000Z

    The electrochemical behavior of lead telluride was studied in acidic, neutral, and alkaline solutions. It was shown that in the case of anodic polarization in 1 M NaOH the PbTe surface composition is nearly stoichiometric. During cathodic polarization in 1 M NaOH and during anodic polarization in 1 M HCl the surface layer is lead-rich. In the case of anodic polarization in 1 M HCl the surface is tellurium-rich. Cathodic polarization in 1 M NaCl leads to tellurium depletion of the surface layer. Reaction equations describing the electrochemical processes at the PbTe electrode are reported.

  6. Central solar heating plants with seasonal storage in mines

    SciTech Connect (OSTI)

    Eikmeier, B.; Mohr, M.; Unger, H.

    1999-07-01T23:59:59.000Z

    The solar assisted heat supply of building offers a great technical potential for the substitution of fossil energy sources. Central solar Heating Plants with Seasonal Storage (CSHPSS) supply 100 and more buildings and reach a solar fraction of 50% or more of the total load with far less specific heat costs [$/kWh{sub solar}] compared to small domestic hot water systems (DHW) for single-family houses. However, the construction of seasonal storage is too expensive. At the Ruhu University Bochum the use of mines for a seasonal storage of low temperature heat is examined in cooperation with industrial partners. The use of available storage volumes may lead to a decrease of investment costs. Additional geothermal heat gains can be obtained from the warm surrounding rock; therefore a high efficiency can be achieved.

  7. Coalbed methane production case histories

    SciTech Connect (OSTI)

    Not Available

    1981-02-01T23:59:59.000Z

    The production of methane gas from coal and coal-bearing rocks is one of the prime objectives of the Department of Energy's Methane Recovery from Coalbeds Project. This report contains brief description of wells that are presently producing gas from coal or coal-bearing rocks. Data from three gob gas production areas in Illinois, an in-mine horizontal borehole degasification, and eleven vertical boreholes are presented. Production charts and electric logs of the producing zones are included for some of the wells. Additional information on dry gas production from the San Juan Basin, Colorado/New Mexico and the Greater Green River Coal Region, Colorado/Wyoming is also included.

  8. Low glare luminaire for thin seam mining. Open file report 29 Sep 78-28 Feb 82

    SciTech Connect (OSTI)

    Parker, J.R.; Hahn, W.F.

    1982-10-01T23:59:59.000Z

    Work places of an underground coal mine are required (30 CFR 1719) to be illuminated while self-propelled equipment is used. Permissible machine-mounted systems have been developed and applied satisfactorily to many mining operations. However, some low-seam and thin-seam equipment has been difficult to illuminate because reliable, direct current (dc) systems and compact, low output, low-glare luminaires were not available. This program resulted in the design and prototype construction of compact, low-glare luminaires and alternate current (ac) power systems, particularly suited to resolving illumination problems on low- and thin-seam mining equipment. Design objectives were based on enhancing the prospects for thin-seam illumination solutions through definition of a product that could challenge markets enjoyed by higher glare luminaires and through reduction of technical risks associated with any new product development as well as the MSHA certification process.

  9. Design criteria applicable to the environmental restoration of sites affected by uranium mining activities in the past

    SciTech Connect (OSTI)

    Carboneras, P. [ENRESA, Madrid (Spain); Sanchez, M. [INITEC, Madrid (Spain)

    1993-12-31T23:59:59.000Z

    In this paper the authors discuss the basic aspects to be considered while evaluating different alternatives to perform environmental restoration of sites affected by naturally occurring radionuclides, enhanced by human actions, as is the case in some old uranium mining activities. The discussion is confined to sites where radiation hazards had existed forever (sites with uranium deposits) and where the mining activities have introduced several factors modifying the initial situation, leading to the now existing one, requiring intervention as decided by the relevant authorities, in accordance with recommendations of ICRP60.

  10. 2.0 GEOGRAPHIC ANALYSIS ON THE LOCATION OF URANIUM MINES

    E-Print Network [OSTI]

    2.0 GEOGRAPHIC ANALYSIS ON THE LOCATION OF URANIUM MINES With the exception of some phosphate mine areas in central and northern Florida, people are most likely to be exposed to uranium mining mines. Figure 2.1 was generated from uranium mining-related records from the U.S. Bureau of Mines-- now

  11. USE of mine pool water for power plant cooling.

    SciTech Connect (OSTI)

    Veil, J. A.; Kupar, J. M .; Puder, M. G.

    2006-11-27T23:59:59.000Z

    Water and energy production issues intersect in numerous ways. Water is produced along with oil and gas, water runs off of or accumulates in coal mines, and water is needed to operate steam electric power plants and hydropower generating facilities. However, water and energy are often not in the proper balance. For example, even if water is available in sufficient quantities, it may not have the physical and chemical characteristics suitable for energy or other uses. This report provides preliminary information about an opportunity to reuse an overabundant water source--ground water accumulated in underground coal mines--for cooling and process water in electric generating facilities. The report was funded by the U.S. Department of Energy's (DOE's) National Energy Technology Laboratory (NETL), which has implemented a water/energy research program (Feeley and Ramezan 2003). Among the topics studied under that program is the availability and use of ''non-traditional sources'' of water for use at power plants. This report supports NETL's water/energy research program.

  12. Scholarship Opportunity for Graduate Studies School of Mining Engineering

    E-Print Network [OSTI]

    Wagner, Stephan

    of Mineral Resources and Reserves, School of Mining Engineering University of the Witwatersrand Tel: +27 11 and a keen interest in the mining industry. In alignment with this mission, the COSMO Consortium of global

  13. Distributed Multivariate Regression Using Wavelet-based Collective Data Mining.

    E-Print Network [OSTI]

    Kargupta, Hilol

    an approach to the analysis of distributed, heterogeneous databases with distinct feature spacesDistributed Multivariate Regression Using Wavelet-based Collective Data Mining. Daryl E a method for distributed multivariate regression using wavelet- based Collective Data Mining (CDM

  14. An experimental investigation of mine burial penetration in soft sediments

    E-Print Network [OSTI]

    Munim, Mohammed Abdul

    2003-01-01T23:59:59.000Z

    An experimental program was conducted to study the penetration behavior of mines in soft sediment. Model tests were conducted on sediments collected from the Gulf of Mexico seabed. The size of the model mine was approximately one third...

  15. Water Management Plans for Surface Coal Mining Operations (North Dakota)

    Broader source: Energy.gov [DOE]

    A water management plan is required for all surface coal mining operations. This plan must be submitted to the State Engineer of the State Water Commission at the same time a surface mining permit...

  16. Texas Surface Coal Mining and Reclamation Act (Texas)

    Broader source: Energy.gov [DOE]

    The Railroad Commission of Texas regulates all surface mining activities for the extraction of coal. The Commission acts with the authority of the Texas Surface Coal Mining and Reclamation Act,...

  17. Texas Uranium Exploration, Surface Mining, and Reclamation Act (Texas)

    Broader source: Energy.gov [DOE]

    The Railroad Commission of Texas is the regulatory authority for uranium surface mining. Law authorizes the Commission to assure that reclamation of mining sites is possible, to protect land owners...

  18. A generic study of strip mining impacts on groundwater resources

    E-Print Network [OSTI]

    Hamilton, David Andrew

    1977-01-01T23:59:59.000Z

    This report evaluates the influence of strip mining features, commonly found in the Northern Great Plains Coal Region, on ground

  19. Mining Spatial Data: Opportunities and Challenges of a Relational Approach

    E-Print Network [OSTI]

    Malerba, Donato

    Mining Spatial Data: Opportunities and Challenges of a Relational Approach D. Malerba1 1: Spatial Data Mining, Multi-Relational Data Mining. Abstract Remote sensing and mobile devices nowadays collect a huge amount of spatial data which have to be analysed in order to discover interesting knowledge

  20. FUZZY SPATIAL DATA MINING George Brannon Smith Susan M. Bridges

    E-Print Network [OSTI]

    Bridges, Susan M.

    FUZZY SPATIAL DATA MINING George Brannon Smith Susan M. Bridges Department of Computer Science Box@cs.mssstate.edu Abstract A fuzzy spatial data mining technique has been developed to extract relationships describing been tested with hand-generated, synthetic, and sonar imagery. Keywords: data mining, spatial relations

  1. Spatial Data Mining: Database Primitives, Algorithms and Efficient DBMS Support

    E-Print Network [OSTI]

    Ester, Martin

    - 1 - Spatial Data Mining: Database Primitives, Algorithms and Efficient DBMS Support Martin Ester: Spatial data mining algorithms heavily depend on the efficient processing of neighbor- hood relations of these concepts will allow a tight integration of spatial data mining algo- rithms with a spatial database

  2. Efficient and Anonymous Web-Usage Mining for Web Personalization

    E-Print Network [OSTI]

    Shahabi, Cyrus

    Efficient and Anonymous Web-Usage Mining for Web Personalization Cyrus Shahabi · Farnoush Banaei fixed. The full economic potential of the web will not be realized unless enabling technologies approach to remedy this problem, and web mining, particularly web-usage mining, is considered a crucial

  3. Sustained Storage and Transport of Hydraulic Gold Mining Sediment

    E-Print Network [OSTI]

    James, L. Allan

    Sustained Storage and Transport of Hydraulic Gold Mining Sediment in the Bear River, California L deposits of hydraulic gold mining sediment remain in main channels of the Bear River more than 100 years- sic model of sediment transport in a symmet- rical wave that is based on hydraulic mining sediment

  4. A Visualization Application for the Mining Industry Using Standard Tools

    E-Print Network [OSTI]

    1/1 A Visualization Application for the Mining Industry Using Standard Tools Steven J. Schafrik visualization tools for modeling an orebody, or a mining process such as loading and tramming. This is usually accomplished using commercial tools, such as mine design packages, process simulators, etc., that have a custom

  5. KOINOTITES: A Web Usage Mining Tool for Personalization

    E-Print Network [OSTI]

    Paliouras, George

    KOINOTITES: A Web Usage Mining Tool for Personalization Dimitrios Pierrakos Inst. of Informatics@iit.demokritos.gr SUMMARY This paper presents the Web Usage Mining system KOINOTITES, which uses data mining techniques for the construction of user communities on the Web. User communities model groups of visitors in a Web site, who have

  6. Dynamic Load Balancing for the Distributed Mining of Molecular Structures

    E-Print Network [OSTI]

    Berthold, Michael R.

    Dynamic Load Balancing for the Distributed Mining of Molecular Structures Giuseppe Di Fatta, Member the data mining community, where algorithms to find frequent graphs have received increasing attention over a distributed approach to the frequent subgraph mining problem to discover interesting patterns in molecular

  7. Vipin Kumar SDM April 2010 0 Mining Scientific Data

    E-Print Network [OSTI]

    Kumar, Vipin

    Mining PhD student Rohit Gupta was selected to present his work on "Colorectal cancer despite colonoscopy© Vipin Kumar SDM ­ April 2010 0 Mining Scientific Data: Past, Present, and Future Vipin Kumar Geo-spatial data Homeland Security #12;© Vipin Kumar SDM ­ April 2010 2 Why Data Mining? Commercial

  8. Distributed Mining of Molecular Fragments Giuseppe Di Fatta

    E-Print Network [OSTI]

    Berthold, Michael R.

    Distributed Mining of Molecular Fragments Giuseppe Di Fatta ICAR-CNR, Consiglio Nazionale delle Michael.Berthold@uni-konstanz.de Abstract In real world applications sequential algorithms of data mining mining algorithms. However, the computational complexity of the problem and the large amount of data

  9. Data mining in high energy physics Bertrand Brelier

    E-Print Network [OSTI]

    Prodiæ, Aleksandar

    Bertrand Brelier (SOSCIP) Data mining in high energy physics July 3, 2014 5 / 8 #12;Jobs User submit job if failing Output of job downloaded on local computer Bertrand Brelier (SOSCIP) Data mining in high energyData mining in high energy physics Bertrand Brelier SOSCIP July 3, 2014 Bertrand Brelier (SOSCIP

  10. Colorado School of Mines Graduate Bulletin 2007-08

    E-Print Network [OSTI]

    Colorado School of Mines Graduate Bulletin 2007-08 nitelluBetaudarGseniMfoloohcSodaroloC80-7002 #12;Colorado School of Mines 20072008 Graduate Bulletin #12;To CSM Graduate Students: This Bulletin is for your use as a source of continuing reference. Please save it. Published by Colorado School of Mines, Golden

  11. Web Mining: Pattern Discovery from World Wide Web Transactions

    E-Print Network [OSTI]

    Kumar, Vipin

    ­based organizations often generate and collect large volumes of data in their daily operations. Analyzing such data access logs. We propose a framework for Web mining, the applications of data mining and knowledge from the Web data. We also present a Web mining system, WEBMINER, which has been implemented based upon

  12. Research Report Integrating Association Rule Mining with Relational

    E-Print Network [OSTI]

    Sarawagi, Sunita

    Research Report Integrating Association Rule Mining with Relational Database Systems: Alternatives­6099 ABSTRACT: Data mining on large data warehouses is becoming increasingly important. In support of this trend in a stored procedure; caching the data to a file system on­the­fly and mining; tight­coupling using primarily

  13. Open Source Data Mining: Workshop Report Bart Goethals

    E-Print Network [OSTI]

    Open Source Data Mining: Workshop Report Bart Goethals University of Antwerp Antwerp, Belgium bart tremendous progress has been made in data mining methods like clustering, classification, fre- quent pattern advances in the field. With this workshop we intended to promote open source data mining (OSDM) by creating

  14. Data Mining in Learning Classifier Systems: Comparing XCS with GAssist

    E-Print Network [OSTI]

    Bacardit, Jaume

    Data Mining in Learning Classifier Systems: Comparing XCS with GAssist Jaume Bacardit1 and Martin V several structural properties of the underlying datasets. 1 Introduction Successful data mining mining including data volume, search space size and type, complexity of the concept, noise in the data

  15. MODERN INTRUSION DETECTION, DATA MINING, AND DEGREES OF ATTACK GUILT

    E-Print Network [OSTI]

    Noel, Steven

    MODERN INTRUSION DETECTION, DATA MINING, AND DEGREES OF ATTACK GUILT Steven Noel Center for Secure, with a particular emphasis on the emerging approach of data mining. The discussion parallels two important aspects security, Intrusion detection, data mining 1. Introduction The goal of intrusion detection is to discover

  16. Segmentation for Medical Image Mining: A Technical Ashraf Elsayed1

    E-Print Network [OSTI]

    Atkinson, Katie

    Segmentation for Medical Image Mining: A Technical Report Ashraf Elsayed1 , Frans Coenen1 , Marta, such as relational databases, has been the focal point of much work in data mining. However, with advances, sound, etc). There is currently a very substantial collection of image data that can be mined

  17. Beyond Process Mining: From the Past to Present and Future

    E-Print Network [OSTI]

    van der Aalst, Wil

    . However, thus far, process mining is mainly used in an of- fline fashion and not for operational decision a framework for operational support using process mining and details a coherent set of approaches that focuses in an operational setting. Process mining is mainly used in an offline setting where historical information

  18. An Autonomous Robotic System for Mapping Abandoned Mines

    E-Print Network [OSTI]

    Thrun, Sebastian

    control. The system has been tested in a number of mines. Some of the results reported here were obtainedAn Autonomous Robotic System for Mapping Abandoned Mines D. Ferguson, A. Morris, D. H¨ahnel, C system for mapping aban- doned mines. The software is capable of acquiring consistent 2D maps of large

  19. Fast Mining of Sequential Patterns in Very Large Databases

    E-Print Network [OSTI]

    Zaki, Mohammed Javeed

    : Knowledge Discovery, Data Mining, Sequential Patterns, Sequence Discovery, Temporal Association Rules growth of data has spurred the growth of the new field called Data Mining and Knowledge Discovery mining refers to the core model/pattern discovery step. The other steps include data selection, cleaning

  20. GPU-Accelerated Text Mining Yongpeng Zhang, Frank Mueller

    E-Print Network [OSTI]

    Mueller, Frank

    GPU-Accelerated Text Mining Yongpeng Zhang, Frank Mueller North Carolina State University of parallelism and novel programming environ- ments. This present work assesses the viability of text mining on CUDA. Text mining is one of the key concepts that has become prominent as an effective means to index

  1. Security Issues in Data Warehousing and Data Mining: Panel Discussion

    E-Print Network [OSTI]

    Lin, Tsau Young

    and mining. Position by Linda Schlipper For most enterprises there is no shortage of data. Operational dataSecurity Issues in Data Warehousing and Data Mining: Panel Discussion Bhavani Thuraisingham Corporation Abstract This paper describes the panel discussion on data warehousing, data mining and security

  2. Data Mining in Learning Classifier Systems: Comparing XCS with GAssist

    E-Print Network [OSTI]

    Bacardit, Jaume

    Data Mining in Learning Classifier Systems: Comparing XCS with GAssist Jaume Bacardit and Martin V) 333­2346 Fax: (217) 244­5705 #12; Data Mining in Learning Classifier Systems: Comparing XCS be distinguished in data mining including data volume, search space size and type, complexity of the concept, noise

  3. Mining Competitive Relationships by Learning across Heterogeneous Networks

    E-Print Network [OSTI]

    Menczer, Filippo

    . Existing studies mainly focus on mining competitive relationships within a single data source, whileMining Competitive Relationships by Learning across Heterogeneous Networks Yang Yang , Jie Tang. In this paper, we study the problem of mining competitive rela- tionships by learning across heterogeneous

  4. Parallel Formulations of Tree-Projection-Based Sequence Mining Algorithm

    E-Print Network [OSTI]

    Karypis, George

    , database projection algorithms, data mining, parallel processing This work was supported by NSF CCR-9972519 Institute. 1 #12;1 Introduction In recent years there has been an increased interest in using data miningParallel Formulations of Tree-Projection-Based Sequence Mining Algorithm Valerie Guralnik

  5. Underground Coal Mine Monitoring with Wireless Sensor Networks

    E-Print Network [OSTI]

    Liu, Yunhao

    10 Underground Coal Mine Monitoring with Wireless Sensor Networks MO LI and YUNHAO LIU Hong Kong University of Science and Technology Environment monitoring in coal mines is an important application queries under instable circumstances. A prototype is deployed with 27 mica2 motes in a real coal mine. We

  6. WITS MINING : DISTINCTLY EXCEPTIONAL As the largest School of Mining Engineering in the English-speaking world, we continue to invest in

    E-Print Network [OSTI]

    Wagner, Stephan

    Mining in 2012? Mining Fundamentals ·Mineral resources are wasting assets - Minerals become valuable) Feel good factors ·Mineral exports as % of total exports 31% ·Mining's (direct) contribution to GDP 9," Nick Holland to Reuters Global Mining "Our Vision is to be the global leader in sustainable gold mining

  7. Coal mine ground control. 3rd ed.

    SciTech Connect (OSTI)

    Peng, S.S.

    2008-09-15T23:59:59.000Z

    The third edition not only completely revises and updates the original subject areas, but also is broadened to include a number of new topics such as high horizontal stresses, computer modeling, and highwall stability. The subject areas covered in this book define the current field of coal mine ground control, except for the recently emerging topic of mine seals and some conventional subjects such as coal/rock cutting and impoundment dams. It contains 1,134 references from all published sources, and archived since 1876.

  8. Made in China, Mined in Australia: Interdependency and Business-Cycle Transmission between Chinese and Australian Industries

    E-Print Network [OSTI]

    1 Made in China, Mined in Australia: Interdependency and Business- Cycle Transmission between of interdependence between Australia and China due to the transmission of economic shocks between production in the two countries. I analyse two models to ascertain the impact of Chinese development on Australia

  9. SEISMIC MONITORING APPLIED TO MINES SAFETY AND OPTIMAL DESIGN OF MINE LAYOUTS IN HARD ROCK MASS SITATIONS

    E-Print Network [OSTI]

    Boyer, Edmond

    SEISMIC MONITORING APPLIED TO MINES SAFETY AND OPTIMAL DESIGN OF MINE LAYOUTS IN HARD ROCK MASSRockMechanics, School of Mines ofNancy, France. ABSTRACT : The paper intends to show how seismic data can be usefülly rock, tabular situations are usually associated with induced, seismic activity, i.e. the occurrence

  10. Considerations concerning the installation of mine planning computers at the Sar Cheshmeh copper complex in Iran

    SciTech Connect (OSTI)

    Raieszadeh, A.; Hooper, G.; Spratley, B.

    1993-09-01T23:59:59.000Z

    Large mining companies have appreciated the benefits to be gained by the improvement of the technical and financial aspects of mining operations through the use of computers. Since the early 1960`s they have spent large amounts of money in attempting to realize the benefits of improved operational direction and control. Today the emphasis is on desktop workstations and software packages for the main applications rather than the mainframe or minicomputer and in-house software development. There is substantial experience in the industry of the wide range of computer software and hardware currently available, but there are still operations where the pace of development of computer assistance has been restricted due to a variety of factors. The lack of computing facilities at Sar Cheshmeh gave the management of the mine the opportunity to review the state of current technology and choose the most appropriate configuration without having to retrofit to any existing system. The primary areas for computerization that were evaluated were: geology and ore reserves; mine design and planning; geotechnical analysis, planning and monitoring; production scheduling and reporting; equipment selection, costing and optimization; equipment maintenance management; stock control and ordering; management reporting; equipment scheduling.

  11. ITP Mining: Water Use in Industries of the Future: Mining Industry

    Broader source: Energy.gov (indexed) [DOE]

    Water Use in Industries of the Future: Mining Industry 1 Contributed by: Jim Mavis CH2M HILL 777 108 th Ave., NE Bellevue, WA 98004 Prepared under contract to Center for Waste...

  12. ITP Mining: Energy and Environmental Profile of the U.S. Mining...

    Broader source: Energy.gov (indexed) [DOE]

    1 Combustion Engineering, Combustion-Fossil Power, Chapter 2-7, 1991. Coal 2-1 Energy and Environmental Profile of the U.S. Mining Industry Anthracite - Hard and very...

  13. ITP Mining: Energy and Environmental Profile of the U.S. Mining...

    Broader source: Energy.gov (indexed) [DOE]

    oil is consumed by bulldozers, portable mining equipment, and dryers. Dryers are usually gas-fired, but use oil as a standby fuel. Power consumption is a function of material...

  14. NATIONAL LEAD COMPANY OF OHIO

    Office of Legacy Management (LM)

    t-t AL- 1. + T fi r,y* t ,.- . NATIONAL LEAD COMPANY OF OHIO Ofll i iy Ci)wp HEALTH AND SAFETY DIVISION - ANALYTICAL DEPT. ANALYTICAL DATA SHEET U-G b ;33y jl:tL G c-w &3(y I...

  15. Estimation of Lead and Arsenic Bioavailability Using a

    E-Print Network [OSTI]

    Ma, Lena

    - ability of Pb derived from mining wastes or smelter emissions have confirmed the dependence of Pb bioavail

  16. Soluble Lead Flow Battery: Soluble Lead Flow Battery Technology

    SciTech Connect (OSTI)

    None

    2010-09-01T23:59:59.000Z

    GRIDS Project: General Atomics is developing a flow battery technology based on chemistry similar to that used in the traditional lead-acid battery found in nearly every car on the road today. Flow batteries store energy in chemicals that are held in tanks outside the battery. When the energy is needed, the chemicals are pumped through the battery. Using the same basic chemistry as a traditional battery but storing its energy outside of the cell allows for the use of very low cost materials. The goal is to develop a system that is far more durable than today’s lead-acid batteries, can be scaled to deliver megawatts of power, and which lowers the cost of energy storage below $100 per kilowatt hour.

  17. Preliminary report on LLNL mine seismicity deployment at the Twentymile Coal Mine

    SciTech Connect (OSTI)

    Walter, W.R.; Hunter, S.L.; Glenn, L.A.

    1996-01-01T23:59:59.000Z

    This report summarizes the preliminary results of a just completed experiment at the Twentymile Coal Mine, operated by the Cyprus Amax Coal Company near Oak Creek, CO. The purpose of the experiment was to obtain local and regional seismic data from roof caves associated with long-wall mining activities and to use this data to help determine the effectiveness with which these events can be discriminated from underground nuclear explosions under a future Comprehensive Test Ban Treaty.

  18. Computer Science MAPO: Mining API Usages from

    E-Print Network [OSTI]

    Xie, Tao

    Computer Science MAPO: Mining API Usages from Open Source Repositories Tao Xie Department of Computer Science North Carolina State University, USA Jian Pei Department of Computer Science Simon Fraser University, Canada ·http://ase.csc.ncsu.edu/ #12;Computer Science Learning API Usages is Challenging ·org

  19. Global integration for metals, mining and forest

    E-Print Network [OSTI]

    such as coils, bars and sheets. · Forest and paper companies own or lease forests, cut timber, process woodBeyond the familiar Global integration for metals, mining and forest and paper companies Industrial commitment by IBM Global Business Services to provide analysis and viewpoints that help companies realize

  20. Geospatial Data Store Colorado School of Mines

    E-Print Network [OSTI]

    Geospatial Data Store Colorado School of Mines White Paper February 2006 Martin Spann, Adjunct Professor EPICS #12;2 A Geospatial Data Store Contents Executive Summary Proposed Budget (short version) General Information Geospatial Data Geospatial Data Store Library Geospatial Committee Academic

  1. Database Transposition for Constrained (Closed) Pattern Mining

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Database Transposition for Constrained (Closed) Pattern Mining Baptiste Jeudy1 and Fran¸cois Rioult pat- terns in databases with pathological size. For example, experiments in genome biology usually provide databases with thousands of attributes (genes) but only tens of objects (experiments

  2. Generating power with drained coal mine methane

    SciTech Connect (OSTI)

    NONE

    2005-09-01T23:59:59.000Z

    The article describes the three technologies most commonly used for generating electricity from coal mine methane: internal combustion engines, gas turbines, and microturbines. The most critical characteristics and features of these technologies, such as efficiency, output and size are highlighted. 5 refs.

  3. Rare Earth Element Mines, Deposits, and Occurrences

    E-Print Network [OSTI]

    Torgersen, Christian

    Rare Earth Element Mines, Deposits, and Occurrences by Greta J. Orris1 and Richard I. Grauch2 Open. For many years, the deposit at Mountain Pass was the world's dominant source of rare earth elements of rare earth element concentration. Many of the occurrences have not been well studied and the economic

  4. Bornholm Cases in Web Mining rup Nielsen

    E-Print Network [OSTI]

    Nielsen, Finn Ã?rup

    Bornholm Cases in Web Mining Finn A Ã? rup Nielsen Informatics and Mathematical Modelling Technical A Ã? rup Nielsen, IMM, DTU April 7, 2002 OVERVIEW #15; PubMed & ISI #15; ResearchIndex. Web; DEADLINER. Special topic search engine. #15; Webgames. #15; Modeling the growth of the web. #15; Gene

  5. Bornholm Web Mining Techniques rup Nielsen

    E-Print Network [OSTI]

    Nielsen, Finn Ã?rup

    Bornholm Web Mining Techniques Finn A Ã? rup Nielsen Informatics and Mathematical Modelling; Focused crawling #15; Counting links #15; Size of web-sites #15; PostScript/PDF conversion #15; Generation and Giles, 1998). \\[...] no engine indexes more than about 16% of the web" (Lawrence and Giles, 1999). #15

  6. Physical Limitations on Mining Natural Earth Systems

    E-Print Network [OSTI]

    Patzek, Tadeusz W.

    Physical Limitations on Mining Natural Earth Systems A view of the Himalayas from Lhasa Tad Patzek of fossil fuels ("resources") left all over the Earth The resource size (current balance of a banking flow-based solutions (wind turbines, photovoltaics, and biofuels) will require most radical changes

  7. State Budget and its Impacts on Mines

    E-Print Network [OSTI]

    1 State Budget and its Impacts on Mines Faculty Conference August 23, 2010 Kirsten M. Volpi, CPA Senior Vice President for Finance and Administration #12;Agenda State of Colorado budget overview budget Future Financial outlook State Senate Bill 10-003 2 #12;State of Colorado Budget (OSPB October

  8. WIRELESS MINE-WIDE TELECOMMUNICATIONS TECHNOLOGY

    SciTech Connect (OSTI)

    Zvi H. Meiksin

    2004-01-01T23:59:59.000Z

    A prototype tracking system was built and tested. Moving vehicles were detected by the tracking system when a vehicle was 20 to 30 feet away from a location sensor. The identity of the vehicle was transmitted to Transtek's in-mine communications system and relayed to a desktop computer.

  9. Colorado School of Mines Service Center Procedures

    E-Print Network [OSTI]

    will usually develop and incorporate its own indirect cost rate in order to recover utilities, space School of Mines Service Center Procedures - 2 - I. PURPOSE CSM conducts research under Government sponsored awards. Therefore, service center procedures must reflect government regulatory costing principles

  10. Mining malware specifications through static reachability analysis

    E-Print Network [OSTI]

    Boyer, Edmond

    Mining malware specifications through static reachability analysis Hugo Daniel Macedo1 and Tayssir be used to model the stack operations occurring during the binary code execution), use reachability the file under analysis is malicious. Experimental data shows that our approach can be used to learn

  11. New Mexico Bureau Mines and Mineral

    E-Print Network [OSTI]

    Dunbar, Nelia W.

    Number22 - 1999 New Mexico Bureau of Mines and Mineral Resources a division of Nei~, Mexico Tech forsandblasting five times! ThisIssue Earth Briefs-Better age estimates on some New Mexico volcanic rocks Have You) NewMexico's Most Wanted Minera Is (pageT) Magnification of microscopic miner- als and glass (page 8

  12. WWW-2005 Tutorial Web Content Mining

    E-Print Network [OSTI]

    Hu, Wen-Chen

    of surface Web and deep Web. Surface Web: pages that can be browsed using a browser. Deep Web: databasesWWW-2005 Tutorial Web Content Mining Bing Liu Department of Computer Science University of Illinois at Chicago (UIC) liub@cs.uic.edu http://www.cs.uic.edu/~liub The 14th International World Wide Web Conference

  13. Precipitation and Transformation of Secondary Fe Oxyhydroxides in a Histosol Impacted by Runoff from a Lead Smelter

    SciTech Connect (OSTI)

    Gao, X.; Schulze, D

    2010-01-01T23:59:59.000Z

    Secondary Fe(III) oxyhydroxides play a key role in controlling the mobility and bioavailability of trace metals in acidic, sulfate-rich soils, such as mining and smelter sites. Schwertmannite, jarosite, goethite, and ferrihydrite are the most common mineral phases identified in such soils. A good understanding of the precipitation and transformation of these minerals in soils is very important for predicting the mobility and long-term stability of trace metals associated with them. In the present study, bulk powder X-ray diffraction (XRD), scanning electron microscopy (SEM), synchrotron based micro-X-ray diffraction ({mu}-XRD), and micro X-ray fluorescence ({mu}-SXRF) spectroscopy were used to investigate precipitates from the surface horizon of an organic soil (Histosol) at a site that once contained a lead smelter. Soil samples were collected from 0 to -10 cm depth during both wet and dry seasons. Goethite and akaganeite were identified as the major mineral phases in this soil. Schwertmannite and jarosite were also occasionally identified, particularly in the soil samples from dry periods. The peaks in the akaganeite XRD pattern were significantly broadened and the relative intensities of some major peaks were distinctly different compared with the diffraction pattern of synthetic akaganeite, possibly due to the effects of pH and the incorporation of sulfate. The SEM and {mu}-XRD data support the hypothesis that the goethite in the precipitates is not the product of direct precipitation from solution but the transformation of previously precipitated schwertmannite or akaganeite.

  14. QCD analysis and effective temperature of direct photons in lead-lead collisions at the LHC

    E-Print Network [OSTI]

    M. Klasen; C. Klein-Bösing; F. König; J. P. Wessels

    2014-09-11T23:59:59.000Z

    We present a systematic theoretical analysis of the ALICE measurement of low-$p_T$ direct-photon production in central lead-lead collisions at the LHC with a centre-of-mass energy of $\\sqrt{s_{NN}}=2.76$ TeV. Using next-to-leading order of perturbative QCD, we compute the relative contributions to prompt-photon production from different initial and final states and the theoretical uncertainties coming from independent variations of the renormalisation and factorisation scales, the nuclear parton densities and the fragmentation functions. Based on different fits to the unsubtracted and prompt-photon subtracted ALICE data, we consistently find an exponential, possibly thermal, photon spectrum from the quark-gluon plasma (or hot medium) with slope $T=304\\pm 58$ MeV and $309\\pm64$ MeV at $p_T\\in[0.8;2.2]$ GeV and $p_T\\in[1.5;3.5]$ GeV as well as a power-law ($p_T^{-4}$) behavior for $p_T>4$ GeV as predicted by QCD hard scattering.

  15. An Insoluble Titanium-Lead Anode for Sulfate Electrolytes

    SciTech Connect (OSTI)

    Ferdman, Alla

    2005-05-11T23:59:59.000Z

    The project is devoted to the development of novel insoluble anodes for copper electrowinning and electrolytic manganese dioxide (EMD) production. The anodes are made of titanium-lead composite material produced by techniques of powder metallurgy, compaction of titanium powder, sintering and subsequent lead infiltration. The titanium-lead anode combines beneficial electrochemical behavior of a lead anode with high mechanical properties and corrosion resistance of a titanium anode. In the titanium-lead anode, the titanium stabilizes the lead, preventing it from spalling, and the lead sheathes the titanium, protecting it from passivation. Interconnections between manufacturing process, structure, composition and properties of the titanium-lead composite material were investigated. The material containing 20-30 vol.% of lead had optimal combination of mechanical and electrochemical properties. Optimal process parameters to manufacture the anodes were identified. Prototypes having optimized composition and structure were produced for testing in operating conditions of copper electrowinning and EMD production. Bench-scale, mini-pilot scale and pilot scale tests were performed. The test anodes were of both a plate design and a flow-through cylindrical design. The cylindrical anodes were composed of cylinders containing titanium inner rods and fitting over titanium-lead bushings. The cylindrical design allows the electrolyte to flow through the anode, which enhances diffusion of the electrolyte reactants. The cylindrical anodes demonstrate higher mass transport capabilities and increased electrical efficiency compared to the plate anodes. Copper electrowinning represents the primary target market for the titanium-lead anode. A full-size cylindrical anode performance in copper electrowinning conditions was monitored over a year. The test anode to cathode voltage was stable in the 1.8 to 2.0 volt range. Copper cathode morphology was very smooth and uniform. There was no measurable anode weight loss during this time period. Quantitative chemical analysis of the anode surface showed that the lead content after testing remained at its initial level. No lead dissolution or transfer from the anode to the product occurred.A key benefit of the titanium-lead anode design is that cobalt additions to copper electrolyte should be eliminated. Cobalt is added to the electrolyte to help stabilize the lead oxide surface of conventional lead anodes. The presence of the titanium intimately mixed with the lead should eliminate the need for cobalt stabilization of the lead surface. The anode should last twice as long as the conventional lead anode. Energy savings should be achieved due to minimizing and stabilizing the anode-cathode distance in the electrowinning cells. The anode is easily substitutable into existing tankhouses without a rectifier change.The copper electrowinning test data indicate that the titanium-lead anode is a good candidate for further testing as a possible replacement for a conventional lead anode. A key consideration is the cost. Titanium costs have increased. One of the ways to get the anode cost down is manufacturing the anodes with fewer cylinders. Additional prototypes having different number of cylinders were constructed for a long-term commercial testing in a circuit without cobalt. The objective of the testing is to evaluate the need for cobalt, investigate the effect of decreasing the number of cylinders on the anode performance, and to optimize further the anode design in order to meet the operating requirements, minimize the voltage, maximize the life of the anode, and to balance this against a reasonable cost for the anode. It is anticipated that after testing of the additional prototypes, a whole cell commercial test will be conducted to complete evaluation of the titanium-lead anode costs/benefits.

  16. Superfund Record of Decision (EPA Region 10): Bunker Hill Mining and Metallurgical Complex, Shoshone County, ID. (First remedial action), August 1991

    SciTech Connect (OSTI)

    Not Available

    1991-08-30T23:59:59.000Z

    The Bunker Hill Mining and Metallurgical Complex site is a 21 square-mile area centered around an inactive industrial mining and smelting site, and includes the cities of Kellogg, Smelterville, Wardner, Pinehurst, and Page, in Shoshone County, Idaho. The inactive industrial complex includes the Bunker Hill mine and mill, a lead smelter, a zinc smelter and a phosphoric acid fertilizer plant, all totalling several hundred acres. Initially, most of the solid and liquid residue from the complex was discharged into the river. When the river flooded, these materials were deposited onto the valley floor, and have leached into onsite soil and ground water. The selected remedial action for the site includes soil sampling; excavating contaminated soil and sod exceeding 1,000 mg/kg lead on approximately 1,800 residential properties, and replacing it with clean soil and sod; disposing of the contaminated soil and sod at an onsite repository; and capping the repository.

  17. LEAD PAINT DISCLOSURE Housing built before 1978 may contain lead-based paint. Lead from paint, paint chips, and dust

    E-Print Network [OSTI]

    Royer, Dana

    Your Family from Lead In Your Home. All Wesleyan housing was built before 1978 with the exceptionLEAD PAINT DISCLOSURE Housing built before 1978 may contain lead-based paint. Lead from paint, paint chips, and dust can pose health hazards if not taken care of properly. Lead exposure is especially

  18. The LHC Lead Injector Chain

    E-Print Network [OSTI]

    Beuret, A; Blas, A; Burkhardt, H; Carli, Christian; Chanel, M; Fowler, A; Gourber-Pace, M; Hancock, S; Hourican, M; Hill, C E; Jowett, John M; Kahle, K; Küchler, D; Lombardi, A M; Mahner, E; Manglunki, Django; Martini, M; Maury, S; Pedersen, F; Raich, U; Rossi, C; Royer, J P; Schindl, Karlheinz; Scrivens, R; Sermeus, L; Shaposhnikova, Elena; Tranquille, G; Vretenar, Maurizio; Zickler, T

    2004-01-01T23:59:59.000Z

    A sizeable part of the LHC physics programme foresees lead-lead collisions with a design luminosity of 1027 cm-2 s-1. This will be achieved after an upgrade of the ion injector chain comprising Linac3, LEIR, PS and SPS machines [1,2]. Each LHC ring will be filled in 10 min by almost 600 bunches, each of 7×107 lead ions. Central to the scheme is the Low Energy Ion Ring (LEIR) [3,4], which transforms long pulses from Linac3 into high-brilliance bunches by means of multi-turn injection, electron cooling and accumulation. Major limitations along the chain, including space charge, intrabeam scattering, vacuum issues and emittance preservation are highlighted. The conversion from LEAR (Low Energy Antiproton Ring) to LEIR involves new magnets and power converters, high-current electron cooling, broadband RF cavities, and a UHV vacuum system with getter (NEG) coatings to achieve a few 10-12 mbar. Major hardware changes in Linac3 and the PS are also covered. An early ion scheme with fewer bunches (but each at nominal...

  19. Safer blasting agents and procedures for blasting in gassy non-coal mines. [Quarterly] technical progress report, January 1--March 31, 1993

    SciTech Connect (OSTI)

    Weiss, E.S.

    1993-11-01T23:59:59.000Z

    The US Bureau of Mines` research program is focused on developing procedures and guidelines for acceptable underground oil shale blasting that fulfill the operational requirements for efficiency while maintaining a high level of safety when operating under gassy mine conditions. This work is aimed at providing new information, alternate methods, and innovation in underground blasting procedures. The results from this research will have direct impact on regulatory standards for blasting under gassy mine conditions. Based on the low incendivity data from the Cannon Gallery and several months of recent testing in their mine, Kennecott`s Greens Creek base metal mine in Alaska had decided to exclusively use a low incendive bulk emulsion product in place of the low incendive water gel prod ct for all blasting operations. As was the case with the low incendive water gel product, the use of this bulk product resulted in: no dust ignitions and related injuries and/or production/equipment losses; the elimination if preblasting measures of using stemming and water sprays, and the improvement of roadways due to the reduction of water.

  20. Where Is Lead Found? Paint in many homes built before 1978 may contain lead.

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    in lead crystal or lead-glazed pottery may contain lead. Where Is Lead Most Likely to Be a Hazard on toys and furniture -- especially if antique or imported -- may contain lead. · Food or liquids stored

  1. Safeguards on uranium ore concentrate? the impact of modern mining and milling process

    SciTech Connect (OSTI)

    Francis, Stephen [National Nuclear Laboratory, Chadwick House, Birchwood Park, Warrington WA3 6AE (United Kingdom)

    2013-07-01T23:59:59.000Z

    Increased purity in uranium ore concentrate not only raises the question as to whether Safeguards should be applied to the entirety of uranium conversion facilities, but also as to whether some degree of coverage should be moved back to uranium ore concentrate production at uranium mining and milling facilities. This paper looks at uranium ore concentrate production across the globe and explores the extent to which increased purity is evident and the underlying reasons. Potential issues this increase in purity raises for IAEA's strategy on the Starting Point of Safeguards are also discussed.

  2. Synthesis and regeneration of lead (IV) acetate

    SciTech Connect (OSTI)

    Boyle, T.J.; Al-Shareef, H.N.; Moore, G.J. [Sandia National Labs., Albuquerque, NM (United States). Advanced Materials Lab.

    1996-11-01T23:59:59.000Z

    Lead acetate [Pb(O{sub 2}CMe){sub 4}] was easily synthesized from a warm solution of Pb{sub 3}O{sub 4}, HO{sub 2}CMe and O(OCMe){sub 2} following literature preparations when the appropriate measures to minimize water contamination were followed. Furthermore, Pb(O{sub 2}CMe){sub 4} which has been decomposed (evidenced by the appearance of a purple color due to oxidation) can be regenerated using a similar preparatory route. Introduction of Pb(O{sub 2}CMe){sub 4} from the two routes outlined above into the IMO process for production of PZT thin films gave films with comparable ferroelectric properties to commercially available Pb(O{sub 2}CMe){sub 4} precursors. However, the freshly synthesized material yields PZT films with better properties compared to the recycled material.

  3. Usage Mining for the World Wide Web WenChen Hu, wenchen@cs.und.edu

    E-Print Network [OSTI]

    Hu, Wen-Chen

    an overview and analysis of current Web usage mining technologies and systems. A Web usage mining system recommendations, etc. This paper provides an overview and analysis of current Web usage mining technologies usage mining is also given. Related Web usage mining technology reviews can also be found in [13, 17

  4. An Algorithm for In-Core Frequent Itemset Mining on Streaming Data Ruoming Jin Gagan Agrawal

    E-Print Network [OSTI]

    Agrawal, Gagan

    .ohio-state.edu Abstract Frequent itemset mining is a core data mining operation and has been extensively studied over Frequent itemset mining is a core data mining operation and has been extensively studied over the lastAn Algorithm for In-Core Frequent Itemset Mining on Streaming Data Ruoming Jin Gagan Agrawal

  5. Approximate Mining of Consensus Sequential Patterns Hye-Chung (Monica) Kum

    E-Print Network [OSTI]

    Whitton, Mary C.

    . Mining sequential patterns in large databases of such data has become an important data mining task pattern mining, to mine databases with long sequences. A paradigm, which defines patterns operationallyApproximate Mining of Consensus Sequential Patterns by Hye-Chung (Monica) Kum A dissertation

  6. Proc. of IEEE DMGrid 2004, Workshop on Data Mining and Grid of IEEE ICDM 2004, Int. Conf. on Data Mining, Brighton (UK), 1-4 Nov., 2004 Distributed Mining of Molecular Fragments

    E-Print Network [OSTI]

    Reiterer, Harald

    Proc. of IEEE DMGrid 2004, Workshop on Data Mining and Grid of IEEE ICDM 2004, Int. Conf. on Data Mining, Brighton (UK), 1-4 Nov., 2004 Distributed Mining of Molecular Fragments Giuseppe Di Fatta ICAR sequential algorithms of data mining and data exploration are often unsuitable for datasets with enormous

  7. Mining Gamma-Ray Burst Data

    E-Print Network [OSTI]

    Jon Hakkila; Richard J. Roiger; David J. Haglin; Robert S. Mallozzi; Geoffrey N. Pendleton; Charles A. Meegan

    2000-11-30T23:59:59.000Z

    Gamma-ray bursts provide what is probably one of the messiest of all astrophysical data sets. Burst class properties are indistinct, as overlapping characteristics of individual bursts are convolved with effects of instrumental and sampling biases. Despite these complexities, data mining techniques have allowed new insights to be made about gamma-ray burst data. We demonstrate how data mining techniques have simultaneously allowed us to learn about gamma-ray burst detectors and data collection, cosmological effects in burst data, and properties of burst subclasses. We discuss the exciting future of this field, and the web-based tool we are developing (with support from the NASA AISR Program). We invite others to join us in AI-guided gamma-ray burst classification (http://grb.mnsu.edu/grb/).

  8. Marine clathrate mining and sediment separation

    DOE Patents [OSTI]

    Borns, David J. (Albuquerque, NM); Hinkebein, Thomas E. (Albuquerque, NM); Lynch, Richard W. (Albuquerque, NM); Northrop, David A. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    A method and apparatus for mining of hydrocarbons from a hydrocarbon-containing clathrate such as is found on the ocean floor. The hydrocarbon containing clathrate is disaggregated from sediment by first disrupting clathrate-containing strata using continuous mining means such as a rotary tilling drum, a fluid injector, or a drill. The clathrate-rich portion of sediment thus disrupted from the sea floor strata are carried through the apparatus to regions of relative lower pressure and/or relative higher temperature where the clathrate further dissociates into component hydrocarbons and water. The hydrocarbon is recovered with the assistance of a gas that is injected and buoys the hydrocarbon containing clathrate helping it to rise to regions of lower pressure and temperature where hydrocarbon is released. The sediment separated from the hydrocarbon returns to the ocean floor.

  9. Cutting sound enhancement system for mining machines

    DOE Patents [OSTI]

    Leigh, Michael C. (Coal Center, PA); Kwitowski, August J. (Clairton, PA)

    1992-01-01T23:59:59.000Z

    A cutting sound enhancement system (10) for transmitting an audible signal from the cutting head (101) of a piece of mine machinery (100) to an operator at a remote station (200), wherein, the operator using a headphone unit (14) can monitor the difference in sounds being made solely by the cutting head (101) to determine the location of the roof, floor, and walls of a coal seam (50).

  10. Nick Wright Named Advanced Technologies Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nick Wright Named Advanced Technologies Group Lead Nick Wright Named Advanced Technologies Group Lead February 4, 2013 Nick Nick Wright has been named head of the National Energy...

  11. NERSC seeks Computational Systems Group Lead

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    seeks Computational Systems Group Lead NERSC seeks Computational Systems Group Lead January 6, 2011 by Katie Antypas Note: This position is now closed. The Computational Systems...

  12. Distributed Generation Lead-by-Example Resources

    Broader source: Energy.gov [DOE]

    State governments can lead by example by promoting renewable energy programs and policies. Efforts to lead by example include using renewable energy resources (including alternative fuel for...

  13. Injury experience in stone mining, 1991. Information report

    SciTech Connect (OSTI)

    Not Available

    1993-10-01T23:59:59.000Z

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of stone mining in the united States for 1991. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  14. Safety at coal mines: what role does methane play?

    SciTech Connect (OSTI)

    NONE

    2006-04-01T23:59:59.000Z

    The recent Sago Mine disaster in West Virginia and other widely publicized coal mine accidents around the world have received a great deal of attention and have generated some confusion about the link between methane drainage and safety. In response, this article provides an overview of safety concerns faced by coal mines and how they do or do not relate to methane. The first section explains the variety of safety issues a coal mine must take into consideration, including methane build-up. The second section summarizes the recent coal mines accident at Sago Mine in West Virginia. The final section describes the regulatory and legislative responses in the US. 2 refs., 2 figs.

  15. Research and Development of a New Silica-Alumina Based Cementitious Material Largely Using Coal Refuse for Mine Backfill, Mine Sealing and Waste Disposal Stabilization

    SciTech Connect (OSTI)

    Henghu Sun; Yuan Yao

    2012-06-29T23:59:59.000Z

    Coal refuse and coal combustion byproducts as industrial solid waste stockpiles have become great threats to the environment. To activate coal refuse is one practical solution to recycle this huge amount of solid waste as substitute for Ordinary Portland Cement (OPC). The central goal of this project is to investigate and develop a new silica-alumina based cementitious material largely using coal refuse as a constituent that will be ideal for durable construction, mine backfill, mine sealing and waste disposal stabilization applications. This new material is an environment-friendly alternative to Ordinary Portland Cement. The main constituents of the new material are coal refuse and other coal wastes including coal sludge and coal combustion products (CCPs). Compared with conventional cement production, successful development of this new technology could potentially save energy and reduce greenhouse gas emissions, recycle vast amount of coal wastes, and significantly reduce production cost. A systematic research has been conducted to seek for an optimal solution for enhancing pozzolanic reactivity of the relatively inert solid waste-coal refuse in order to improve the utilization efficiency and economic benefit as a construction and building material.

  16. Nevada Production and Injection Well Data for Facilities with Flash Steam Plants

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Mines, Greg

    Files contain a summary of the production and injection data submitted by the geothermal operators to the Nevada Bureau of Mines and Geology over the period from 1985 thru 2009

  17. Nevada Production and Injection Well Data for Facilities with Flash Steam Plants

    SciTech Connect (OSTI)

    Mines, Greg

    2014-03-26T23:59:59.000Z

    Files contain a summary of the production and injection data submitted by the geothermal operators to the Nevada Bureau of Mines and Geology over the period from 1985 thru 2009

  18. Effects of unseeded areas on species richness of coal mines reclaimed with municipal biosolids

    SciTech Connect (OSTI)

    Halofsky, J.E.; McCormick, L.H. [Penn State University, University Park, PA (United States). School for Forest Resources

    2005-12-01T23:59:59.000Z

    Land application of municipal biosolids on coal mine spoils can benefit vegetation establishment in mine reclamation. However, the application of biosolids leads to domination by early-successional species, such as grasses, and low establishment of woody and volunteer species, thus reducing potential for forestry as a postmining land use. In this experiment, tree seedlings were planted in strips (0.6-, 1-, and 4-m wide) that were not seeded with grasses, and the effects of unseeded strip width on seedling growth and species richness were assessed. Planted seedling mortality was high; therefore, the effect of unseeded strip width on seedling growth could not be determined. However, it was found that natural plant invasion and species richness were highest in the 4-m unseeded strips. The practice of leaving 4-m-wide unseeded strips in mine reclamation with biosolids in the eastern United States, along with the improvement of tree seedling planting practices and planting stock, would help promote a more species-rich plant community that could be utilized for forestry or a variety of other postmining land uses.

  19. The 'Mine/Yours' method of international comparisons of carbon emissions

    SciTech Connect (OSTI)

    Murtishaw, Scott; Schipper, Lee; Unander, Fridtjof

    2000-09-01T23:59:59.000Z

    In previous work (Schipper, Unander & Lilliu 1999), we summarized a new method for comparing energy use and carbon emissions among various countries. We call this the ''Mine/Yours'' comparison. In this paper, we provide details of the comparisons methodology, and carry out the comparison on a number of IEA countries. We calculate the average energy intensities I for a sample of countries (''yours'') and multiply them by structural parameters S for a particular country (''mine''). Comparing the results with the actual energy use of the country in question gives us an estimate of how much energy that country would use with average intensities but with its own structural conditions. The converse can be calculated as well, that is, average structure and own intensities. Emissions can be introduced through the F (fuel mix) term. These calculations show where differences in the components of emissions lead to large gaps among countries, and where those differences are not important. We show which components cause the largest variance in emissions by sector. In households, home size, average winter climate, and energy intensity appear to be the most important differentiating characteristics for space heating. For other residential energy uses the mix of fuels used to generate electricity (utility mix) is most important. Because some of the differences are ''built in'' - geography, climate, natural resources endowment - we conclude by questioning whether uniform emissions reductions targets make sense. Indeed, the ''Mine/Yours'' tool provides a valuable guide to important ways in which emissions may or may not be flexible.

  20. Determining Mountaintop Mining Locations in West Virginia Using Elevation Datasets

    E-Print Network [OSTI]

    Rowland, Danny

    2009-11-18T23:59:59.000Z

    Determining Mountaintop Mining Locations in West Virginia Using Elevation Datasets Danny Rowland Haskell Indian Nations University Image from: http://www.colorado.edu/geography/cartpro/cartography2/spring2006/syphers.../projects/westvirginia/whatis.htm Image from: http://washingtonindependent.com/49008/congress-takes-on-mountaintop-mining Mountaintop Mining Operation 2 Elevation datasets: NED & SRTM West Virginia NED SRTM Elevation Change Over ~30 Year Period 20021970’s SRTM Subtracted from...

  1. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, Lars D. (Albuquerque, NM)

    1984-01-01T23:59:59.000Z

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again.

  2. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, L.D.

    1982-08-25T23:59:59.000Z

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again.

  3. Multi-lead heat sink

    DOE Patents [OSTI]

    Roose, L.D.

    1984-07-03T23:59:59.000Z

    The disclosure relates to a heat sink used to protect integrated circuits from the heat resulting from soldering them to circuit boards. A tubular housing contains a slidable member which engages somewhat inwardly extending connecting rods, each of which is rotatably attached at one end to the bottom of the housing. The other end of each rod is fastened to an expandable coil spring loop. As the member is pushed downward in the housing, its bottom edge engages and forces outward the connecting rods, thereby expanding the spring so that it will fit over an integrated circuit. After the device is in place, the member is slid upward and the spring contracts about the leads of the integrated circuit. Soldering is now conducted and the spring absorbs excess heat therefrom to protect the integrated circuit. The placement steps are repeated in reverse order to remove the heat sink for use again. 4 figs.

  4. After record sales and production, international met markets plummet

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2009-03-15T23:59:59.000Z

    After surging in 2007 and most of 2008, both the demand and the pricing for coal collapsed in 2008's final quarter. The article discusses last year's market and gives some predictions on 2009's production and prices. The National Mining Association predicts that production of coking coal will fall 11% due to plunging demand for steel. 4 photos.

  5. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization CLEAN COAL BY-PRODUCTS UTILIZATION IN ROADWAY, EMBANKMENTS-fueled plants, particularly use of eastern coals, has lead to the use of clean coal and using advanced sulfur dioxide control technologies. Figure 1 shows clean coal technology benefits(2) . In 1977, the concept

  6. Linking heavy metal bioavailability (Cd, Cu, Zn and Pb) in Scots pine needles to soil properties in reclaimed mine areas

    E-Print Network [OSTI]

    Battles, John

    concentrations in mine soils. An exception was in the case of Cd in soils on sand quarry and hard coal spoil heap. Introduction Post-mining facilities such as open pit quarries, lignite mine spoil heaps, open pit sulphur mine

  7. Development of alternatives to lead-bearing solders

    SciTech Connect (OSTI)

    Vianco, P.T. [Sandia National Labs., Albuquerque, NM (United States)

    1993-07-01T23:59:59.000Z

    Soldering technology, using tin-lead alloys has had a significant role in the packaging of highly functional, low cost electronic devices. The elimination of lead from all manufactured products, whether through legislation or tax incentives, will impact the electronics community which uses lead-containing solders. In response to these proposed measures, the National Center for Manufacturing Sciences has established a multi-year program involving participants from industry, academia, and the national laboratories with the objective to identify potential replacements for lead-bearing solders. Selection of candidate alloys is based upon the analysis of materials properties, manufacturability, modeling codes for reliability prediction, as well as toxicological properties and resource availability, data developed in the program.

  8. Application of the directional hydraulic fracturing at Berezovskaya Mine

    SciTech Connect (OSTI)

    Lekontsev, Y.M.; Sazhin, P.V. [Russian Academy of Sciences, Novosibirsk (Russian Federation). Institute for Mining

    2008-05-15T23:59:59.000Z

    The paper analyzes the experimental research of the directional hydraulic fracturing applied for weakening of rocks at Berezovskaya Mine (Kuznetsk Coal Basin) in 2005-2006.

  9. Development Wells At Salt Wells Area (Nevada Bureau of Mines...

    Open Energy Info (EERE)

    Salt Wells Area (Nevada Bureau of Mines and Geology, 2009) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Development Wells At Salt Wells Area...

  10. abandoned underground mines: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . Atmospheric pressure . Air temperature on the surface . Exits . Open or closed old mining voids Introduction, atmospheric pressure, speed and direction of the wind have also...

  11. association rule mining: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    itemsets Example: Milk, Diaper Beer Rule Evaluation Terzi, Evimaria 16 Mining Spatial Gene Expression Data Using Negative Association Rules CERN Preprints Summary: Over...

  12. The market for large rigid haul trucks in surface mining

    SciTech Connect (OSTI)

    Gilewicz, P.

    2002-04-15T23:59:59.000Z

    Originally published in 2001 this updated report provides a definition of the market for large rigid haulers in surface mining. The analysis covers changes to the mining market segments buying these machines including the gains made by coal producers, retrenchment in copper mining, the consolidation taking place among gold mining companies, and the expansion of iron ore producers in Australia and Brazil. It includes a detailed accounting of 2001 truck shipments, and an analysis of trends in the Ultra-truck segment. It concludes with a revised forecast for shipments through 2006. 12 charts, 56 tabs., 2 apps.

  13. Truckee Meadows Community College and Colorado School of Mines...

    Broader source: Energy.gov (indexed) [DOE]

    student teams-from Truckee Meadows Community College in Reno, Nevada and Colorado School of Mines in Denver, Colorado-demonstrated exceptional rigor in their research and...

  14. Reclaiming Altered Landscapes: The Bingham Canyon Mine Memorial.

    E-Print Network [OSTI]

    Haddadin, Dafer S.

    2013-01-01T23:59:59.000Z

    ??Open-Pit mining in America has created landscape alterations that are vast and permanent. These landscapes have created and erased entire communities in order to extract… (more)

  15. DOE Evaluates Environmental Impacts of Uranium Mining on Government...

    Office of Environmental Management (EM)

    DOE identified the preferred alternative of continued management of the program with exploration, mine development and operations, and reclamation at 31 lease tracts for the...

  16. NPDES Rule for Coal Mining Facilities (West Virginia)

    Broader source: Energy.gov [DOE]

    This rule establishes requirements implementing the powers, duties, and responsibilities of State's Water Pollution Control Act with respect to all coal mines, preparation plants and all refuse and...

  17. !"#$%&'()&"*'+,"('+(-.'(/'(01$2,'+,%$+( !"#$%&!'#!'#()*+'"%#!'#,-cole des Mines de Nantes

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    -Marc Menaud, HdR, cole des Mines de Nantes M. Jean-Pierre Gudon, Professeur, cole Polytechnique de Nantes M

  18. Rule of Tennessee Department of Conservation Division of Surface Mining (Tennessee)

    Broader source: Energy.gov [DOE]

    The Division of Surface Mining, under the authority of the Department of Environment and Conservation, has established rules specific to the mining of coal. All coal mining operations must first...

  19. LARGE SCALE PERMEABILITY TEST OF THE GRANITE IN THE STRIPA MINE AND THERMAL CONDUCTIVITY TEST

    E-Print Network [OSTI]

    Lundstrom, L.

    2011-01-01T23:59:59.000Z

    PERMEABILITY TEST OF THE GRANITE' IN THE STRIPA MINE AND,PERMEABILITY TEST OF THE GRANITE IN THE STRIPA MINE ANDPERMEABILITY TEST OF THE GRANITE IN THE STRIPA MINE AND

  20. SWEDISH-AMERICAN COOPERATIVE PROGRAM ON RADIOACTIVE WASTE STORAGE IN MINED CAVERNS. PROGRAM SUMMARY

    E-Print Network [OSTI]

    Witherspoon, P.A.

    2011-01-01T23:59:59.000Z

    WASTE STORAGE IN MINED CAVERNS by P. A. Witherspoon LawrenceWASTE STORAGE IN MINED CAVERNS INTRODUCTION Final and safeon the possibility of using mined caverns in salt as waste

  1. E-Print Network 3.0 - arlit uranium mines Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mathematics 5 geology and Ranger 1 open-pit uranium mine in Australia Summary: Uranium geology and mining Ranger 1 open-pit uranium mine in Australia Mikael Hk UHDSG...

  2. E-Print Network 3.0 - abandoned uranium mines Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sciences and Ecology 15 geology and Ranger 1 open-pit uranium mine in Australia Summary: Uranium geology and mining Ranger 1 open-pit uranium mine in Australia Mikael Hk UHDSG...

  3. Colliers in Corsets? Uncovering Stark County's Nineteenth-Century Coal Mining Women

    E-Print Network [OSTI]

    Sampson, Jason

    2012-01-01T23:59:59.000Z

    notion of family labor that persisted in the coal mines. InAmerican women first entered the coal mines en masse, theyCounty’s Nineteenth-Century Coal Mining Women According to

  4. Chapter 3. Volume and Characteristics of Uranium Mine Wastes Uranium has been found and mined in a wide variety of rocks, including sandstone, carbonates1

    E-Print Network [OSTI]

    3-1 Chapter 3. Volume and Characteristics of Uranium Mine Wastes Uranium has been found and mined conventional mining, solution extraction, and milling of uranium, a principal focus of this report is TENORM, or which may need future reclamation. When uranium mining first started, most of the ores were recovered

  5. RADIOACTIVE WASTE STORAGE IN MINED CAVERNS IN CRYSTALLINE ROCK-RESULTS OF FIELD INVESTIGATIONS AT STRIPA, SWEDEN

    E-Print Network [OSTI]

    Witherspoon, P.A.

    2010-01-01T23:59:59.000Z

    Waste Storage in Mined Caverns—Program Summary. LawrenceWASTE STORAGE IN MINED CAVERNS IN CRYSTALLINE ROCK- BESULTS

  6. Lead Safety Awareness This Bulletin provides information on the safe handling of lead

    E-Print Network [OSTI]

    . CONTROLLING THE HAZARDS: LEAD STORAGE · Use inventory tracking to facilitate proper lead storage and to keep lead inventories to a minimum. · Store lead in containers or covered in specially designed areas. · Routinely monitor lead inventories to check for lead dust contamination. GENERAL GOOD WORK PRACTICES · When

  7. E-Print Network 3.0 - asan mining district Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    University of Hawai'i at Manoa Collection: Environmental Sciences and Ecology 7 Spatial Data Mining, Michael May, Fraunhofer AIS 1 Spatial Data Mining for Customer...

  8. Constructing the aesthetic sense : traversing scales of habitation in the Bingham Canyon Mine .

    E-Print Network [OSTI]

    Pierce, Matthew W., 1973-

    2004-01-01T23:59:59.000Z

    ??The activities of mining and mine reclamation in the American West raise questions of how we perceive, value, and differentiate between 'natural' and man-made landscapes,… (more)

  9. WIPP Employee Inducted Into Mine Rescue Hall of Fame - WIPP Teams...

    Broader source: Energy.gov (indexed) [DOE]

    Waste Isolation Pilot Plant Blue Mine Rescue Team Captain Gary Kessler (right) receives an award from Neal Merrifield, administrator for the Mine Safety and Health Administration...

  10. E-Print Network 3.0 - advanced mining training Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Techniques and Applications Summary: organization: how do research idea come about? Train up talents who can eventually run their own data mining... Data Mining: Foundation,...

  11. Stability evaluation of the Markel Mine at Weeks Island, Louisiana

    SciTech Connect (OSTI)

    Hoffman, E.L.

    1994-06-01T23:59:59.000Z

    A three dimensional (3D) finite element analysis of the Markel Mine located on Weeks Island was performed to: (1) evaluate the stability of the mine and (2) determine the effect of mine failure on the nearby Morton Salt mine and SPR facilities. The first part of the stability evaluation investigates the effect of pillar failure on mine stability. These simulations revealed that tensile stresses and dilatant damage develop in the overlying salt as a result of pillar loss. These tensile stresses extend to the salt/overburden interface only for the case where all 45 of the pillars are assumed to fail. Tensile stresses would likely cause microfracturing of the salt, resulting in a flow path for groundwater from the overlying aquifer to enter the mine. The dilatant damage bridges between the mine and the overburden in the case where 15 or more pillars are removed from the model. Dilatant damage is attributed to microfracturing or changes in the pore structure of the salt and could also result in a flow path for groundwater to enter the mine. The second part of the Markel Mine evaluation investigates the stability of the pillars with respect to three failure mechanisms: tensile failure, compressive failure, and creep rupture. A 3D slabbing pillar model of the Markel mine was developed to investigate progressive failure of the pillars and the effect of slabbing on mine stability. Based on a strain-limiting creep rupture criterion, pillar failure is predicted to be extensive at present. The associated loss of pillar strength should be equivalent to removing all pillars from the model as was done in the first part of this stability analysis, resulting in the possibility of ground water intrusion. Since creep rupture is not a well understood phenomenon, further development and validation of this criterion is recommended.

  12. Knowledge Discovery and Data Mining (KDDM) survey report.

    SciTech Connect (OSTI)

    Phillips, Laurence R.; Jordan, Danyelle N.; Bauer, Travis L.; Elmore, Mark T. (Oak Ridge National Laboratory, Oak Ridge, TN); Treadwell, Jim N. (Oak Ridge National Laboratory, Oak Ridge, TN); Homan, Rossitza A.; Chapman, Leon Darrel; Spires, Shannon V.

    2005-02-01T23:59:59.000Z

    The large number of government and industry activities supporting the Unit of Action (UA), with attendant documents, reports and briefings, can overwhelm decision-makers with an overabundance of information that hampers the ability to make quick decisions often resulting in a form of gridlock. In particular, the large and rapidly increasing amounts of data and data formats stored on UA Advanced Collaborative Environment (ACE) servers has led to the realization that it has become impractical and even impossible to perform manual analysis leading to timely decisions. UA Program Management (PM UA) has recognized the need to implement a Decision Support System (DSS) on UA ACE. The objective of this document is to research the commercial Knowledge Discovery and Data Mining (KDDM) market and publish the results in a survey. Furthermore, a ranking mechanism based on UA ACE-specific criteria has been developed and applied to a representative set of commercially available KDDM solutions. In addition, an overview of four R&D areas identified as critical to the implementation of DSS on ACE is provided. Finally, a comprehensive database containing detailed information on surveyed KDDM tools has been developed and is available upon customer request.

  13. A top-down assessment of energy, water and land use in uranium mining, milling, and refining

    SciTech Connect (OSTI)

    E. Schneider; B. Carlsen; E. Tavrides; C. van der Hoeven; U. Phathanapirom

    2013-11-01T23:59:59.000Z

    Land, water and energy use are key measures of the sustainability of uranium production into the future. As the most attractive, accessible deposits are mined out, future discoveries may prove to be significantly, perhaps unsustainably, more intensive consumers of environmental resources. A number of previous attempts have been made to provide empirical relationships connecting these environmental impact metrics to process variables such as stripping ratio and ore grade. These earlier attempts were often constrained by a lack of real world data and perform poorly when compared against data from modern operations. This paper conditions new empirical models of energy, water and land use in uranium mining, milling, and refining on contemporary data reported by operating mines. It shows that, at present, direct energy use from uranium production represents less than 1% of the electrical energy produced by the once-through fuel cycle. Projections of future energy intensity from uranium production are also possible by coupling the empirical models with estimates of uranium crustal abundance, characteristics of new discoveries, and demand. The projections show that even for the most pessimistic of scenarios considered, by 2100, the direct energy use from uranium production represents less than 3% of the electrical energy produced by the contemporary once-through fuel cycle.

  14. Mines and Quarries: The Coal Mines (Precautions against Inflammable Dust) Order, 1956 

    E-Print Network [OSTI]

    Her Majesty's Stationary Office

    1957-01-01T23:59:59.000Z

    This order is made under the Mines and Quarries Act, 1954, s. 190, which empowers the Minister of Fuel and Power to re-enact (to the extent to which they could be enacted in regulations made under the Act and subject to ...

  15. Mines and Quarries: The Coal and Other Mines (Safety -Lamps and Lighting) Order, 1956 

    E-Print Network [OSTI]

    Her Majesty's Stationary Office

    1960-01-01T23:59:59.000Z

    This order is made under the Mines and Quarries Act, 1954, s. 190, which empowers the Minister of Fuel and Power to re-enact (to the extent to which they could be enacted in regulations made under the Act and subject to modifications of the kind...

  16. Safety in Mine Research EstablishmentPresent-day requirements for protection against fire in coal mines 

    E-Print Network [OSTI]

    Kushnarev, A.; Koslyuk, A.; Petrov, P.

    Analysis of a statistical data shows that, on an average, about 50% of the total underground emergencies occurring in coal mines in the USSR are due to fires. Great attention is, therefore, paid in our country to the problem of protection against...

  17. Patent data mining method and apparatus

    DOE Patents [OSTI]

    Boyack, Kevin W. (Albuquerque, NM); Grafe, V. Gerald (Corrales, NM); Johnson, David K. (Albuquerque, NM); Wylie, Brian N. (Albuquerque, NM)

    2002-01-01T23:59:59.000Z

    A method of data mining represents related patents in a multidimensional space. Distance between patents in the multidimensional space corresponds to the extent of relationship between the patents. The relationship between pairings of patents can be expressed based on weighted combinations of several predicates. The user can select portions of the space to perceive. The user also can interact with and control the communication of the space, focusing attention on aspects of the space of most interest. The multidimensional spatial representation allows more ready comprehension of the structure of the relationships among the patents.

  18. Clarification of construction and mining rainfall runoff

    E-Print Network [OSTI]

    Perry, Roberta Davyd

    1982-01-01T23:59:59.000Z

    in the April 26, 1977, issue of the Federal Re ister. These guide- lines apply to discharges from coal mining sites and associated areas, including surface rainfall runoff. The parameters limited in these standards include pH, total suspended solids, total...H, coagulant dose, and mixing on the efficiency of selected coagulants are evaluated. For the use of either the polymer, American Cyanamid Super- floc 340 or alum with lime for pH adjustment, lower pH levels gave improved removal of total suspended solids...

  19. Acid mine water aeration and treatment system

    DOE Patents [OSTI]

    Ackman, Terry E. (Finleyville, PA); Place, John M. (Bethel Park, PA)

    1987-01-01T23:59:59.000Z

    An in-line system is provided for treating acid mine drainage which basically comprises the combination of a jet pump (or pumps) and a static mixer. The jet pump entrains air into the acid waste water using a Venturi effect so as to provide aeration of the waste water while further aeration is provided by the helical vanes of the static mixer. A neutralizing agent is injected into the suction chamber of the jet pump and the static mixer is formed by plural sections offset by 90 degrees.

  20. The Silicon Mine | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-gTaguspark JumpDetective Jump to:the Nature ofMine Jump to: navigation,