National Library of Energy BETA

Sample records for mining incorporated cxs

  1. Mining

    Broader source: Energy.gov [DOE]

    Supply and cost management–including energy costs–pose key challenges for U.S. mining companies. The industry has worked with AMO to develop a range of resources for increasing energy efficiency and reducing costs.

  2. Longwall mining

    SciTech Connect (OSTI)

    1995-03-14

    As part of EIA`s program to provide information on coal, this report, Longwall-Mining, describes longwall mining and compares it with other underground mining methods. Using data from EIA and private sector surveys, the report describes major changes in the geologic, technological, and operating characteristics of longwall mining over the past decade. Most important, the report shows how these changes led to dramatic improvements in longwall mining productivity. For readers interested in the history of longwall mining and greater detail on recent developments affecting longwall mining, the report includes a bibliography.

  3. African mining

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This book contains papers presented at a conference addressing the development of the minerals industry in Africa. Topics covered include: A review - past, present and future - of Zimbabwe's mining industry; Geomorphological processes and related mineralization in Tanzania; and Rock mechanics investigations at Mufulira mine, Zambia.

  4. Precision Mining

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Precision Mining Double Beta Decay Dark Matter Biology Repository Science Renewable Energy Precision Mining at WIPP is Routine All tunnels that make up the WIPP underground are mined with the same precision that is exhibited in this photo. Typical drift cross sections are about 8m x 4m. Custom excavation and maintenance of openings of any configuration can be made. In 2005, WIPP completed renovations to the 6,000 cubic meter North Experimental Area (NExA). The area, located at the northern end

  5. ITP Mining: Exploration and Mining Technology Roadmap | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Exploration and Mining Technology Roadmap ITP Mining: Exploration and Mining Technology Roadmap PDF icon emroadmap.pdf More Documents & Publications ITP Mining: Mining Industry of the Future Mineral Processing Technology Roadmap ITP Mining: Mining Industry Roadmap for Crosscutting Technologies ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry (December 2002)

  6. Coal mine methane global review

    SciTech Connect (OSTI)

    2008-07-01

    This is the second edition of the Coal Mine Methane Global Overview, updated in the summer of 2008. This document contains individual, comprehensive profiles that characterize the coal and coal mine methane sectors of 33 countries - 22 methane to market partners and an additional 11 coal-producing nations. The executive summary provides summary tables that include statistics on coal reserves, coal production, methane emissions, and CMM projects activity. An International Coal Mine Methane Projects Database accompanies this overview. It contains more detailed and comprehensive information on over two hundred CMM recovery and utilization projects around the world. Project information in the database is updated regularly. This document will be updated annually. Suggestions for updates and revisions can be submitted to the Administrative Support Group and will be incorporate into the document as appropriate.

  7. ITP Mining: Mining Industry Roadmap for Crosscutting Technologies |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Roadmap for Crosscutting Technologies ITP Mining: Mining Industry Roadmap for Crosscutting Technologies PDF icon ccroadmap.pdf More Documents & Publications ITP Mining: Exploration and Mining Technology Roadmap ITP Mining: Mining Industry of the Future Mineral Processing Technology Roadmap ITP Mining: Education Roadmap for Mining Professionals

  8. ITP Mining: The Future Begins with Mining - A Vision of the Mining Industry

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of the Future | Department of Energy The Future Begins with Mining - A Vision of the Mining Industry of the Future ITP Mining: The Future Begins with Mining - A Vision of the Mining Industry of the Future PDF icon vision.pdf More Documents & Publications ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry (December 2002) ITP Mining: Exploration and Mining Technology Roadmap ITP Mining: Mining Industry of the Future Mineral Processing Technology Roadmap

  9. Surface mining

    SciTech Connect (OSTI)

    Not Available

    1989-06-01

    This paper reports on a GAO study of attorney and expert witness fees awarded as a result of litigation brought under the Surface Mining Control and Reclamation Act. As of March 24, 1989, a total of about $1.4 million had been awarded in attorney fees and expenses - about $1.3 subject to the provisions of the Employee Retirement Income Security Act, a comparison of its features with provisions of ERISA showed that the plan differed from ERISA provisions in areas such as eligibility, funding, and contribution limits.

  10. Energy Use Loss and Opportunities Analysis: U.S. Manufacturing & Mining

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Use, Loss and Opportunities Analysis: U.S. Manufacturing & Mining Prepared by Energetics, Incorporated and E3M, Incorporated for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Industrial Technologies Program December 2004 Energy Use, Loss and Opportunities Analysis: U.S. Manufacturing & Mining Prepared by Energetics, Incorporated and E3M, Incorporated for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Industrial Technologies

  11. Mining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mining Mining Supply and cost management-including energy costs-pose key challenges for U.S. mining companies. The industry has worked with AMO to develop a range of resources for increasing energy efficiency and reducing costs. Analytical Studies & Other Publications Manufacturing Energy and Carbon Footprints provide a mapping of energy use, energy loss, and carbon emissions for selected industry sectors. Mining Industry Energy Bandwidth Study (2007) Documents for historical reference Water

  12. Mountaintop mining update

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2006-07-15

    In a bad year for the US mining industry's safety record and public image, Morehead State University hosted a public meeting titled 'Mountaintop mining, health and safety forum'. This was a balanced event, with representatives from the mining industry as well as activists from the environmental community. A full account is given of the presentations and debate at the forum. 6 photos.

  13. Table 23. Coal Mining Productivity by State, Mine Type, and Mine Production Range, 2013

    Gasoline and Diesel Fuel Update (EIA)

    Coal Mining Productivity by State, Mine Type, and Mine Production Range, 2013 (short tons produced per employee hour) U.S. Energy Information Administration | Annual Coal Report 2013 Table 23. Coal Mining Productivity by State, Mine Type, and Mine Production Range, 2013 (short tons produced per employee hour) U.S. Energy Information Administration | Annual Coal Report 2013 Mine Production Range (thousand short tons) Coal-Producing State, Region 1 and Mine Type Above 1,000 Above 500 to 1,000

  14. ICM, Incorporated | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ICM, Incorporated ICM, Incorporated ICM will construct and operate a pilot integrated biorefinery using a proven biochemical platform pretreatment technology enhanced by energy recycling and process flow innovations to refine terrestrial lignocellulosic biomass into fuel ethanol. The proposed process furthers the cost effective production of ethanol from lignocellulosic biomass. PDF icon ICM_Incorporated.pdf More Documents & Publications ICM, Incorporated ICM, Incorporated Biomass IBR Fact

  15. ICM, Incorporated | Department of Energy

    Office of Environmental Management (EM)

    ICM, Incorporated ICM, Incorporated One page on ICM, Incorporated project. ICM will construct and operate a pilot integrated biorefinery using a proven biochemical platform pretreatment technology enhanced by energy recycling and process flow innovations to refine terrestrial lignocellulosic biomass into fuel ethanol. The proposed process furthers the cost effective production of ethanol from lignocellulosic biomass. PDF icon ICM, Incorporated More Documents & Publications ICM, Incorporated

  16. RADIATION APPLICATIONS INCORPORATED

    Office of Legacy Management (LM)

    . <' ," . . * . RADIATION APPLICATIONS INCORPORATED . 370 Lexl.ngton Avenue New York 17# New York jq.5' L- Contract No. A T (30-l)-2093 with the United States Atom ic Energy Commission F O A M SEPARATION Progress Report for March, 1959 Abstract Appreciable cesium enrichment in the foam has been obtained using the system sodium tetraphenyl boron-Geigy reagent. Enrichment ratios varied from 1.5 to 3.5 depending upon operating conditions. The en- richment appears to depend on the ratio of

  17. ITP Mining: Mining Industry of the Future Mineral Processing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of the Future Mineral Processing Technology Roadmap ITP Mining: Mining Industry of the Future Mineral Processing Technology Roadmap PDF icon mptroadmap.pdf More Documents & ...

  18. About the Uranium Mine Team | Department of Energy

    Energy Savers [EERE]

    Uranium Mine Team About the Uranium Mine Team Text coming

  19. PRB mines mature

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2007-08-15

    Already seeing the results of reclamation efforts, America's largest surface mines advance as engineers prepare for the future. 30 years after the signing of the Surface Mining Control and Reclamation Act by Jimmy Carter, western strip mines in the USA, especially in the Powder River Basin, are producing more coal than ever. The article describes the construction and installation of a $38.5 million near-pit crusher and overland belt conveyor system at Foundation Coal West's (FCW) Belle Ayr surface mine in Wyoming, one of the earliest PRB mines. It goes on to describe the development by Rio Tinto of an elk conservatory, the Rochelle Hill Conservation Easement, on reclaimed land at Jacobs Ranch, adjacent to the Rochelle Hills. 4 photos.

  20. Land reclamation beautifies coal mines

    SciTech Connect (OSTI)

    Coblentz, B.

    2009-07-15

    The article explains how the Mississippi Agricultural and Forestry Experiments station, MAFES, has helped prepare land exploited by strip mining at North American Coal Corporation's Red Hills Mine. The 5,800 acre lignite mine is over 200 ft deep and uncovers six layers of coal. About 100 acres of land a year is mined and reclaimed, mostly as pine plantations. 5 photos.

  1. Mine roof support system

    SciTech Connect (OSTI)

    Culley, D.H.

    1982-01-26

    A mine roof support system is disclosed having sets of laterally spaced pairs of elongated support members adapted to be moved into and out of abutting relation with a mine roof. Wheel supported frames extend between and connect adjacent end portions of each pair of support members with adjacent wheel supported frames at the ends of the support members being in spaced tandem relation and connected to each other by connector members. Extensible prop members are connected to and move the wheel supported frames and the elongated support members connected thereto selectively toward and away from the mine roof.

  2. LEHR Incorporated | Open Energy Information

    Open Energy Info (EERE)

    committed to the application of environmentally friendly technology and finding green energy solutions for retail and commercial products. References: LEHR Incorporated1 This...

  3. Indonesian coal mining

    SciTech Connect (OSTI)

    2008-11-15

    The article examines the opportunities and challenges facing the Indonesian coal mining industry and how the coal producers, government and wider Indonesian society are working to overcome them. 2 figs., 1 tab.

  4. Acid mine drainage: Balancing environmental protection and mining realities

    SciTech Connect (OSTI)

    Sturgill, B.J. Jr.; Poland, K.B.

    1995-12-31

    A major environmental concern leading to the enactment of the Surface Mining Control and Reclamation Act of 1977 (SMCRA) was the degradation of streams and waterways from discharges of acid mine drainage (AMD) resulting from coal mining operations. Although SMCRA and its regulatory scheme contains specific provisions addressing the drainage of acidic water from mine sites, as do various other agencies statutes and regulations, AMD from active and abandoned mines remains a major environmental problem in the Appalachian region. The formation of acidic water during coal mining operations is pervasive and some believe impossible to prevent.

  5. Inflatable partition for fighting mine fires

    DOE Patents [OSTI]

    Conti, Ronald S.; Lazzara, Charles P.

    1995-01-01

    The seal is a lightweight, inflatable, bag which may be inflated by a portable air generator and is used to seal a burning mine passage. A collapsible tube-like aperture extends through the seal and allows passage of high expansion foam through the seal in a feed tube. The foam fills the passageway and extinguishes the fire. In other embodiments, the feed tubes incorporate means to prevent collapse of the aperture. In these embodiments a shroud connects the feed tube to a foam generator. This seal allows creation of a high expansion foam fire fighting barrier even in upward sloping passages.

  6. ORS 517 - Mining and Mining Claims | Open Energy Information

    Open Energy Info (EERE)

    - Mining and Mining ClaimsLegal Published NA Year Signed or Took Effect 2013 Legal Citation ORS 517 (2013) DOI Not Provided Check for DOI availability: http:crossref.org...

  7. TOXCO Incorporated | Open Energy Information

    Open Energy Info (EERE)

    Place: British Columbia, Canada Zip: V1R 4L5 Product: British Columbia-based, lithium battery recycling firm. References: TOXCO Incorporated1 This article is a stub. You...

  8. ITP Mining: Education Roadmap for Mining Professionals (December 2002) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Education Roadmap for Mining Professionals (December 2002) ITP Mining: Education Roadmap for Mining Professionals (December 2002) PDF icon edroadmap.pdf More Documents & Publications ITP Metal Casting: A Vision for the U.S. Metal Casting Industry: 2002 and Beyond Education and Outreach Fact Sheet Building America Building Science Education

  9. Mine roof support

    SciTech Connect (OSTI)

    Bollmann, A.

    1982-01-05

    A mine roof support has a base, a supporting prop extending upwardly from the base, an elongated roof-supporting element having one portion supported by the supporting prop and another portion telescopable relative to the one portion toward a mine face and having a free end formed as a housing with a width corresponding to the width of the one portion, and a thrust prop arranged to support the free end section of the telescopable portion of the roof-supporting element and having a roof-side end section which is forcedly displaceable in the housing in direction of elongation of a mine and pivotable in a substantially vertical plane about an axle arranged in the housing.

  10. ITP Mining: Water Use in Industries of the Future: Mining Industry |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Water Use in Industries of the Future: Mining Industry ITP Mining: Water Use in Industries of the Future: Mining Industry PDF icon water_use_mining.pdf More Documents & Publications ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry (December 2002) U.S. Mining Industry Energy Bandwidth Study ITP Mining: Mining Industry of the Future Mineral Processing Technology Roadmap

  11. Incorporating externalities in conservation programs

    SciTech Connect (OSTI)

    Jordan, J.L.

    1995-06-01

    As water utilities incorporate integrated resource planning in their management processes, it is necessary to incorporate the concept of externalities. This is particularly important as methods evolve of evaluating the costs and benefits of water conservation programs. The purpose of this article is to provide an introduction to the issues surrounding externalities, including their definition, methods of internalizing externalities, and a survey of ways to estimate costs and benefits of externalities. Although most discussions of externalities emphasize negative effects on the environment, this article will illustrate both positive and negative externalities associated with practicing water conservation.

  12. mhtml:file://H:\CATX\APPROVED-CXS\EERE FOA 1201 - Rankine Cycle

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Eaton Corporation STATE: WI PROJECT TITLE : Affordable Rankine Cycle Waste Heat Recovery for Heavy Duty Trucks Funding Opportunity Announcement Number Procurement Instrument Number NEPA Control Number CID Number DE-FOA-0001201 DE-EE0007286 Based on my review of the information concerning the proposed action, as NEPA Compliance Officer (authorized under DOE Order 451.1A), I have made the following determination: CX, EA, EIS APPENDIX AND NUMBER: Description: B3.6 Small-scale research and

  13. Mine roof support

    SciTech Connect (OSTI)

    Bollmann, A.

    1981-02-24

    A mine roof support has a base and a roof shield pivoted to the base and carrying at its upper end a pivoted cap which is urged upwardly against the mine roof by a hydraulic pit prop reacting between the cap and the base. The lower end of the roof shield is connected to the base by two links each having a pivot cooperating with a pivot on the roof shield, and a pivot cooperating with a pivot on the base. In addition, the base and/or the lower end of the roof shield has an auxiliary for each link and each link has an auxiliary pivot which can be connected with one of the auxiliary pivots of the base or lower end.

  14. Green River Biodiesel Incorporated | Open Energy Information

    Open Energy Info (EERE)

    River Biodiesel Incorporated Jump to: navigation, search Name: Green River Biodiesel Incorporated Place: Houston, Texas Zip: 77056 Product: Biodiesel project developer and...

  15. General Biodiesel Incorporated | Open Energy Information

    Open Energy Info (EERE)

    Biodiesel Incorporated Jump to: navigation, search Name: General Biodiesel Incorporated Place: Seattle, Washington Zip: 98136 Product: General BioDiesel", Inc. specializes in...

  16. Guidance on Incorporating EPA's Pollution Prevention Strategy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Incorporating EPA's Pollution Prevention Strategy into the Environmental Review Process Guidance on Incorporating EPA's Pollution Prevention Strategy into the Environmental Review ...

  17. MAN Ferrostaal Incorporated | Open Energy Information

    Open Energy Info (EERE)

    Incorporated Jump to: navigation, search Name: MAN Ferrostaal Incorporated Place: Cleveland Zip: 44122 Product: Project developer and engineering company and US-based operating...

  18. Incorporating Weather Data into Energy Savings Calculations ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Incorporating Weather Data into Energy Savings Calculations Incorporating Weather Data into Energy Savings Calculations Better Buildings Residential Network Peer Exchange Call...

  19. A modified version of the geomechanics classification for entry design in underground coal mines

    SciTech Connect (OSTI)

    Newman, D.A.; Bieniawski, Z.T.

    1985-01-01

    The Geomechanics Classification was modified for entry and roof support design in underground room-and-pillar coal mines. Adjustment multipliers were introduced to incorporate the influence of strata weatherability, high horizontal stresses, and the roof support reinforcement factor into the existing classification system. Sixty-two case histories of both standing and fallen mine roof were collected from two mines in the northern Appalachian coalfield. Twenty-seven engineering and geologic parameters were recorded for each case. A partial correlation analysis was carried out on the cases to establish which parameters have a significant impact upon the supported stand-up time of coal mine roof. Survival analysis, a statistical technique used in medical research to assess the effect of a drug or treatment on a patient's life expectancy, was conducted together with stepwise multiple regression to derive values for the adjustment multipliers. A practical example is included to illustrate the application of the modified Geomechanics Classification to underground coal mine design.

  20. Colorado School of Mines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Colorado School of Mines - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  1. Germany knows mining

    SciTech Connect (OSTI)

    2006-11-15

    Whether it is the nuance of precision or robust rock breaking strength, German suppliers have the expertise. Germany has about 120 companies in the mining equipment industry, employing some 16,000 people. The article describes some recent developments of the following companies: DBT, Liebherr, Atlas Copco, BASF, Boart Longyear, Eickhoff, IBS, Maschinenfabrik Glueckauf, Komatsu, TAKRA, Terex O & R, Thyssen Krupp Foerdertechnik and Wirtgen. 7 photos.

  2. Ground control for highwall mining

    SciTech Connect (OSTI)

    Zipf, R.K.; Mark, C.

    2007-09-15

    Perhaps the greatest risk to both equipment and personnel associated with highwall mining is from ground control. The two most significant ground control hazards are rock falls from highwall and equipment entrapment underground. In the central Appalachians, where the majority of highwall mining occurs in the USA, hillseams (or mountain cracks) are the most prominent structure that affects highwall stability. The article discusses measures to minimise the risk of failure associated with hillstreams. A 'stuck' or trapped highwall miner, and the ensuring retrieval or recovery operation, can be extremely disruptive to the highwall mining process. Most entrapment, are due to roof falls in the hole. The options for recovery are surface retrieval, surface excavation or underground recovery. Proper pillar design is essential to maintain highwall stability and prevent entrapments. NIOSH has developed the Analysis of Retreat Mining Pillar stability-Highwall Mining (ARMPS-HWM) computer program to help mine planners with this process. 10 figs.

  3. Field site investigation: Effect of mine seismicity on groundwater hydrology

    SciTech Connect (OSTI)

    Ofoegbu, G.I.; Hsiung, S.; Chowdhury, A.H.; Philip, J.

    1995-04-01

    The results of a field investigation on the groundwater-hydrologic effect of mining-induced earthquakes are presented in this report. The investigation was conducted at the Lucky Friday Mine, a silver-lead-zinc mine in the Coeur d`Alene Mining District of Idaho. The groundwater pressure in sections of three fracture zones beneath the water table was monitored over a 24-mo period. The fracture zones were accessed through a 360-m-long inclined borehole, drilled from the 5,700 level station of the mine. The magnitude, source location, and associated ground motions of mining-induced seismic events were also monitored during the same period, using an existing seismic instrumentation network for the mine, augmented with additional instruments installed specifically for the project by the center for Nuclear Waste Regulatory Analyses (CNWRA). More than 50 seismic events of Richter magnitude 1.0 or larger occurred during the monitoring period. Several of these events caused the groundwater pressure to increase, whereas a few caused it to decrease. Generally, the groundwater pressure increased as the magnitude of seismic event increased; for an event of a given magnitude, the groundwater pressure increased by a smaller amount as the distance of the observation point from the source of the event increased. The data was examined using regression analysis. Based on these results, it is suggested that the effect of earthquakes on groundwater flow may be better understood through mechanistic modeling. The mechanical processes and material behavior that would need to be incorporated in such a model are examined. They include a description of the effect of stress change on the permeability and water storage capacity of a fracture rock mass; transient fluid flow; and the generation and transmission of seismic waves through the rock mass.

  4. Incorporation of additives into polymers

    DOE Patents [OSTI]

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  5. Imaging Ahead of Mining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Imaging Ahead of Mining Imaging Ahead of Mining Radio-Imaging Method (RIM(tm)) Improves Mine Planning and Products Coal mining is becoming more difficult as machines must extract the coal from deeper, thinner, and more geologically complex coal beds. This type of mining also includes the need to reduce risk and costs. To address these mining issues, Stolar Horizon, with support from AMO, redesigned and improved a technology developed twenty years ago. The Radio-Imaging Method (RIM) uses wireless

  6. Hydraulic mining method

    DOE Patents [OSTI]

    Huffman, Lester H. (Kent, WA); Knoke, Gerald S. (Kent, WA)

    1985-08-20

    A method of hydraulically mining an underground pitched mineral vein comprising drilling a vertical borehole through the earth's lithosphere into the vein and drilling a slant borehole along the footwall of the vein to intersect the vertical borehole. Material is removed from the mineral vein by directing a high pressure water jet thereagainst. The resulting slurry of mineral fragments and water flows along the slant borehole into the lower end of the vertical borehole from where it is pumped upwardly through the vertical borehole to the surface.

  7. Enterprise Assessments Review of Mine Safety, Stabilization,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mine Safety, Stabilization, and Habitability at the Waste Isolation Pilot Plant - October 2015 Enterprise Assessments Review of Mine Safety, Stabilization, and Habitability at the...

  8. Education Roadmap for Mining Professionals

    SciTech Connect (OSTI)

    none,

    2002-12-01

    This document represents the roadmap for education in the U.S. mining industry. It was developed based on the results of an Education Roadmap Workshop sponsored by the National Mining Association in conjunction with the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held February 23, 2002 in Phoenix, Arizona.

  9. Proceedings, 26th international conference on ground control in mining

    SciTech Connect (OSTI)

    Peng, S.S.; Mark, C.; Finfinger, G.

    2007-07-01

    Papers are presented under the following topic headings: multiple-seam mining, surface subsidence, coal pillar, bunker and roadway/entry supports, mine design and highwall mining, longwall, roof bolting, stone and hardrock mining, rock mechanics and mine seal.

  10. Measuring mine roof bolt strains

    DOE Patents [OSTI]

    Steblay, Bernard J. (Lakewood, CO)

    1986-01-01

    A mine roof bolt and a method of measuring the strain in mine roof bolts of this type are disclosed. According to the method, a flat portion on the head of the mine roof bolt is first machined. Next, a hole is drilled radially through the bolt at a predetermined distance from the bolt head. After installation of the mine roof bolt and loading, the strain of the mine roof bolt is measured by generating an ultrasonic pulse at the flat portion. The time of travel of the ultrasonic pulse reflected from the hole is measured. This time of travel is a function of the distance from the flat portion to the hole and increases as the bolt is loaded. Consequently, the time measurement is correlated to the strain in the bolt. Compensation for various factors affecting the travel time are also provided.

  11. ISO New England, Incorporated | Open Energy Information

    Open Energy Info (EERE)

    Incorporated Jump to: navigation, search Name: ISO New England, Incorporated Place: Holyoke, MA References: SGIC1 This article is a stub. You can help OpenEI by expanding it. ISO...

  12. Tomographic inversion techniques incorporating physical constraints...

    Office of Scientific and Technical Information (OSTI)

    inversion techniques incorporating physical constraints for line integrated spectroscopy in stellarators and tokamaksa) Citation Details In-Document Search Title:...

  13. Mining Industry Energy Bandwidth Study

    SciTech Connect (OSTI)

    none,

    2007-07-01

    The Industrial Technologies Program (ITP) relies on analytical studies to identify large energy reduction opportunities in energy-intensive industries and uses these results to guide its R&D portfolio. The energy bandwidth illustrates the total energy-saving opportunity that exists in the industry if the current processes are improved by implementing more energy-efficient practices and by using advanced technologies. This bandwidth analysis report was conducted to assist the ITP Mining R&D program in identifying energy-saving opportunities in coal, metals, and mineral mining. These opportunities were analyzed in key mining processes of blasting, dewatering, drilling, digging, ventilation, materials handling, crushing, grinding, and separations.

  14. Mining and Reclamation Technology Symposium

    SciTech Connect (OSTI)

    None Available

    1999-06-24

    The Mining and Reclamation Technology Symposium was commissioned by the Mountaintop Removal Mining/Valley Fill Environmental Impact Statement (EIS) Interagency Steering Committee as an educational forum for the members of the regulatory community who will participate in the development of the EIS. The Steering Committee sought a balanced audience to ensure the input to the regulatory community reflected the range of perspectives on this complicated and emotional issue. The focus of this symposium is on mining and reclamation technology alternatives, which is one of eleven topics scheduled for review to support development of the EIS. Others include hydrologic, environmental, ecological, and socio-economic issues.

  15. Surface mine regulations complicate reclamation

    SciTech Connect (OSTI)

    Seltz-Patrash, A.

    1980-09-01

    The Surface Mining Control and Reclamation Act of 1977 is a landmark environmental law intended to protect U.S. lands from stripmining effects. However, coal mine operators claim that some SMCRA regulations are misguidedcosting time and money, but yielding no substantial environmental benefit. Unlike other environmental acts, SMCRA details specifically the goals of reclamation and the methods that must be implemented to meet these goals. Coal industry representatives believe that this discourages innovation, promotes inefficiency by ignoring regional differences among sites, and results in unnecessary expense to the industry. Reclamation practices and progress among western coal mining companies are evaluated. (1 map, 5 photos)

  16. Mining fatty acids from algae

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mining fatty acids from algae Mining fatty acids from algae Scientists at Los Alamos National Laboratory and the University of Washington are exploring the use of lipids for energy: as a starting material for creating biofuels. February 24, 2016 Chrysochromulina tobin cell structure. (A) Scanning electron micrograph of C. tobin. Two flagella are visible (marked F) along with the prominent coiled haptonema (white arrow). Scale bar represents 2.5 microns. (B) Electron micrograph of whole cell:

  17. Proceedings, 27th international conference on ground control in mining

    SciTech Connect (OSTI)

    Peng, S.S.; Mark, C.; Finfinger, G.

    2008-07-01

    Topics covered include: coal bumps and rockbursts, surface subsidence, surface mining, mine seals, longwall mining, pillars, roof bolting, rock mechanics and standing supports.

  18. Westinghouse Earns Mine Safety Award for Exceptional Underground...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    On September 19, New Mexico State Inspector of Mines Gilbert Miera and the New Mexico Mining Association presented Westinghouse with the "Mine Operator of the Year" award. The...

  19. Shahe Huada Mining Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Shahe Huada Mining Co Ltd Jump to: navigation, search Name: Shahe Huada Mining Co Ltd Place: Hebei Province, China Sector: Biomass Product: Shahe-based private mining company....

  20. Mine roof supporting system

    SciTech Connect (OSTI)

    Curry, P.F.

    1981-06-23

    A stabilizing arrangement for mine roof support systems of the type in which a series of support units, each including a transverse beam supported at opposite ends by extensible props, are interconnected by extensible struts in a manner to be selfadvancing by alternate retraction of support units from a roof supporting condition and extension of the struts to advance such retracted units relative to others of such units which are in an extended roof engaging condition. The connection of each prop to the beam in a given unit is pivotal to allow deflection of the beam and props of a supporting unit from a normal perpendicular relationship under load. The stabilizing means restores the props and beam to a normal perpendicular relationship for advancing movement of each support unit. The supporting units are further stabilized relative to the struts by prop supporting brackets permitting canting movement of the props from a perpendicular relationship with respect to the struts but maintaining the props in a generally upright position for unit advance.

  1. In vivo incorporation of unnatural amino acids

    DOE Patents [OSTI]

    Schultz, Peter (La Jolla, CA); Wang, Lei (San Diego, CA); Anderson, John Christopher (San Diego, CA); Chin, Jason W. (Cambridge, GB); Liu, David R. (Lexington, MA); Magliery, Thomas J. (North Haven, CT); Meggers, Eric (Philadelphia, PA); Mehl, Ryan Aaron (Lancaster, PA); Pastrnak, Miro (San Diego, CA); Santoro, Stephen William (Cambridge, MA); Zhang, Zhiwen (San Diego, CA)

    2011-03-29

    The invention provides methods and compositions for in vivo incorporation of unnatural amino acids. Also provided are compositions including proteins with unnatural amino acids.

  2. In vivo incorporation of unnatural amino acids

    DOE Patents [OSTI]

    Schultz, Peter G. (La Jolla, CA); Wang, Lei (San Diego, CA); Anderson, John Christopher (San Diego, CA); Chin, Jason W. (Cambridge, GB); Liu, David R. (Lexington, MA); Magliery, Thomas J. (North Haven, CT); Meggers, Eric L. (Philadelphia, PA); Mehl, Ryan Aaron (Lancaster, PA); Pastrnak, Miro (San Diego, CA); Santoro, Stephen William (Cambridge, MA); Zhang, Zhiwen (San Diego, CA)

    2011-10-04

    The invention provides methods and compositions for in vivo incorporation of unnatural amino acids. Also provided are compositions including proteins with unnatural amino acids.

  3. In vivo incorporation of unnatural amino acids

    DOE Patents [OSTI]

    Schultz, Peter G. (La Jolla, CA); Wang, Lei (San Diego, CA); Anderson, John Christopher (San Diego, CA); Chin, Jason W. (Cambridge, GB); Liu, David R. (Lexington, MA); Magliery, Thomas J. (North Haven, CT); Meggers, Eric L. (Philadelphia, PA); Mehl, Ryan Aaron (Lancaster, PA); Pastrnak, Miro (San Diego, CA); Santoro, Stephen William (Cambridge, MA); Zhang, Zhiwen (San Diego, CA)

    2012-02-14

    The invention provides methods and compositions for in vivo incorporation of unnatural amino acids. Also provided are compositions including proteins with unnatural amino acids.

  4. In vivo incorporation of unnatural amino acids

    DOE Patents [OSTI]

    Schultz, Peter G. (La Jolla, CA); Wang, Lei (San Diego, CA); Anderson, John Christopher (San Diego, CA); Chin, Jason W. (Cambridge, GB); Liu, David R. (Lexington, MA); Magliery, Thomas J. (North Haven, CT); Meggers, Eric L. (Philadelphia, PA); Mehl, Ryan Aaron (Lancaster, PA); Pastrnak, Miro (San Diego, CA); Santoro, Stephen William (Cambridge, MA); Zhang, Zhiwen (San Diego, CA)

    2012-05-08

    The invention provides methods and compositions for in vivo incorporation of unnatural amino acids. Also provided are compositions including proteins with unnatural amino acids.

  5. Incorporating Energy Efficiency into Disaster Recovery Efforts...

    Broader source: Energy.gov (indexed) [DOE]

    9, 2014. Call Slides and Discussion Summary More Documents & Publications Coordinating Energy Efficiency with Other Disaster Resiliency Services Model Guidelines for Incorporating...

  6. Incorporating Weather Data into Energy Savings Calculations

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Incorporating Weather Data into Energy Savings Calculations, Call Slides and Discussion Summary, February 26, 2015.

  7. Incorporating Energy Efficiency into Disaster Recovery Efforts

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Program Sustainability Peer Exchange Call Series: Incorporating Energy Efficiency into Disaster Recovery Efforts, Call Slides and Discussion Summary, October 9, 2014.

  8. In vivo incorporation of unnatural amino acids

    DOE Patents [OSTI]

    Schultz, Peter (La Jolla, CA); Wang, Lei (San Diego, CA); Anderson, John Christopher (San Diego, CA); Chin, Jason W. (Cambridge, GB); Liu, David R. (Lexington, MA); Magliery, Thomas J. (North Haven, CT); Meggers, Eric (Philadelphia, PA); Mehl, Ryan Aaron (Lancaster, PA); Pastrnak, Miro (San Diego, CA); Santoro, Steven William (Cambridge, MA); Zhang, Zhiwen (San Diego, CA)

    2008-05-06

    The invention provides methods and compositions for in vivo incorporation of unnatural amino acids. Also provided are compositions including proteins with unnatural amino acids.

  9. In vivo incorporation of unnatural amino acids

    DOE Patents [OSTI]

    Schultz, Peter (La Jolla, CA); Wang, Lei (San Diego, CA); Anderson, John Christopher (San Diego, CA); Chin, Jason W. (Cambridge, GB); Liu, David R. (Lexington, MA); Magliery, Thomas J. (North Haven, CT); Meggers, Eric (Philadelphia, PA); Mehl, Ryan Aaron (Lancaster, PA); Pastrnak, Miro (San Diego, CA)

    2009-12-29

    The invention provides methods and compositions for in vivo incorporation of unnatural amino acids. Also provided are compositions including proteins with unnatural amino acids

  10. In vivo incorporation of unnatural amino acids

    DOE Patents [OSTI]

    Schultz, Peter; Wang, Lei; Anderson, John Christopher; Chin, Jason William; Liu, David R.; Magliery, Thomas J.; Meggers, Eric L.; Mehl, Ryan A.; Pastrnak, Miro; Santoro, Steven William; Zhang, Zhiwen

    2006-05-16

    The invention provides methods and compositions for in vivo incorporation of unnatural amino acids. Also provided are compositions including proteins with unnatural amino acids.

  11. Survey of nine surface mines in North America. [Nine different mines in USA and Canada

    SciTech Connect (OSTI)

    Hayes, L.G.; Brackett, R.D.; Floyd, F.D.

    1981-01-01

    This report presents the information gathered by three mining engineers in a 1980 survey of nine surface mines in the United States and Canada. The mines visited included seven coal mines, one copper mine, and one tar sands mine selected as representative of present state of the art in open pit, strip, and terrace pit mining. The purpose of the survey was to investigate mining methods, equipment requirements, operating costs, reclamation procedures and costs, and other aspects of current surface mining practices in order to acquire basic data for a study comparing conventional and terrace pit mining methods, particularly in deeper overburdens. The survey was conducted as part of a project under DOE Contract No. DE-AC01-79ET10023 titled The Development of Optimal Terrace Pit Coal Mining Systems.

  12. Mine locations: Kazakhstan

    SciTech Connect (OSTI)

    Perry, Bradley A

    2008-01-01

    Upon accepting this internship at Los Alamos National Laboratory, I was excited but a bit nervous because I was placed into a field I knew nothing about and did not incorporate my mechanical engineering background. However, I stayed positive and realized that experience and education can come in many forms and that this would be a once in a lifetime opportunity. The EES-II Division (which stands for Earth and Environmental Sciences, Geophysics division) concentrates on several topics, including Nuclear Treaty Verification Seismology. The study of this is extremely important in order to monitor countries that have nuclear capability and make sure they follow the rules of the international comprehensive nuclear test ban treaty. Seismology is only one aspect of this monitoring and EES-II works diligently with many other groups here at Los Alamos and across the world.

  13. Surface mining: State management of abandoned mine land funds

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    The Surface Mining Control and Reclamation Act of 1977 promotes the reclamation of areas severely damaged in the past by coal mining operations. GAO reviewed the reclamation programs in Colorado, Kentucky, Pennsylvania, West Virginia, and Wyoming and found that they implemented financial control procedures and practices to ensure that the expenditures of reclamation funds are proper. Only one state, however, is complying with all related grant payment, audit, and inventory requirements. The states are generally reclaiming eligible, high priority projects as required under the act and are managing their reclamation projects in compliance with federal requirements.

  14. Tomographic inversion techniques incorporating physical constraints for

    Office of Scientific and Technical Information (OSTI)

    line integrated spectroscopy in stellarators and tokamaks (Journal Article) | SciTech Connect Tomographic inversion techniques incorporating physical constraints for line integrated spectroscopy in stellarators and tokamaks Citation Details In-Document Search Title: Tomographic inversion techniques incorporating physical constraints for line integrated spectroscopy in stellarators and tokamaks Accurate tomographic inversion is important for diagnostic systems on stellarators and tokamaks

  15. Incorporating Biodiversity Considerations Into Environmental Impact

    Office of Environmental Management (EM)

    Analysis Under NEPA | Department of Energy Incorporating Biodiversity Considerations Into Environmental Impact Analysis Under NEPA Incorporating Biodiversity Considerations Into Environmental Impact Analysis Under NEPA This Council on Environmental Quality (CEQ) report is intended to provide background on the emerging, complex subject of biodiversity, outline some general concepts that underlie biological diversity analysis and management, describe how the issue is currently addressed in

  16. WIPP Takes Second in Mine Rescue Competition

    Broader source: Energy.gov [DOE]

    CARLSBAD, N.M. – EM’s Waste Isolation Pilot Plant (WIPP) mine rescue team placed second in the Southwestern Regional Mine Rescue Competition this past spring in Carlsbad, and it took home more than a trophy.

  17. MINES ParisTech | Open Energy Information

    Open Energy Info (EERE)

    it. MINES ParisTech was created in 1783, when the exploitation of mines was a high-technology industry. Quite naturally, the skills of the School followed the development of...

  18. Table 17. Recoverable Coal Reserves and Average Recovery Percentage at Producing U.S. Mines by Mine Production Range and Mine Type,

    Gasoline and Diesel Fuel Update (EIA)

    Recoverable Coal Reserves and Average Recovery Percentage at Producing U.S. Mines by Mine Production Range and Mine Type, 2013 (million short tons) U.S. Energy Information Administration | Annual Coal Report 2013 Table 17. Recoverable Coal Reserves and Average Recovery Percentage at Producing U.S. Mines by Mine Production Range and Mine Type, 2013 (million short tons) U.S. Energy Information Administration | Annual Coal Report 2013 Underground Surface Total Mine Production Range (thousand short

  19. UK mining invests, suppliers profit

    SciTech Connect (OSTI)

    2009-04-15

    In the midst of a major economic crisis in the United Kingdom, equipment suppliers have been reporting a number of considerable purchases by British coal mining companies. In December 2008, Liebherr-Great Britain delivered the first two of four Rq350 Litronic hydraulic excavators for use at the Broken Cross opencast coal site in Lanarkshire, Scotland. Ten Terex TR100 rigid haulers were delivered to the site in late 2008. Hatfield Colliery at Stainforth, South Yorkshire, has been reopened by PowerFuel. The main equipment for two longwall faces was supplied by Joy Mining Machinery UK Ltd. 2 photos.

  20. Logistics background study: underground mining

    SciTech Connect (OSTI)

    Hanslovan, J. J.; Visovsky, R. G.

    1982-02-01

    Logistical functions that are normally associated with US underground coal mining are investigated and analyzed. These functions imply all activities and services that support the producing sections of the mine. The report provides a better understanding of how these functions impact coal production in terms of time, cost, and safety. Major underground logistics activities are analyzed and include: transportation and personnel, supplies and equipment; transportation of coal and rock; electrical distribution and communications systems; water handling; hydraulics; and ventilation systems. Recommended areas for future research are identified and prioritized.

  1. Turnaround team revitalizes mining operations

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2005-11-01

    Starting from scratch, the Broe Companies' Century Coal trains the next generation. The article describes how the newly created Century Coal LLC, controlled by Denver-based Broe Companies investment firm, is rebuilding and expanding its highwall mining operations, increasing production from a current 1 million tons to 5 to 6 million tons in 2006 and 2007. The company has a $100,000 outreach program with 95% of these funds going to local communities. Present coal mining operations are spread around Bell, Clay, Harlan Knox and Leslie Counties. A priority is the renovation of the WenLar preparation plant in Bell County. 5 photos.

  2. Oil shale mining studies and analyses of some potential unconventional uses for oil shale

    SciTech Connect (OSTI)

    McCarthy, H.E.; Clayson, R.L.

    1989-07-01

    Engineering studies and literature review performed under this contract have resulted in improved understanding of oil shale mining costs, spent shale disposal costs, and potential unconventional uses for oil shale. Topics discussed include: costs of conventional mining of oil shale; a mining scenario in which a minimal-scale mine, consistent with a niche market industry, was incorporated into a mine design; a discussion on the benefits of mine opening on an accelerated schedule and quantified through discounted cash flow return on investment (DCFROI) modelling; an estimate of the costs of disposal of spent shale underground and on the surface; tabulation of potential increases in resource recovery in conjunction with underground spent shale disposal; the potential uses of oil shale as a sulfur absorbent in electric power generation; the possible use of spent shale as a soil stabilizer for road bases, quantified and evaluated for potential economic impact upon representative oil shale projects; and the feasibility of co-production of electricity and the effect of project-owned and utility-owned power generation facilities were evaluated. 24 refs., 5 figs., 19 tabs.

  3. Coal mining in the United States: SMCRA`s successful blueprint

    SciTech Connect (OSTI)

    Henry, K.L.

    1997-06-01

    In his forward in Night Comes to the Cumberlands, former Secretary of the Interior Stewart Udall observed that Caudill`s constructive proposals for rehabilitation of the coal counties {open_quotes}will take deep concern by people in Washington and Frankfort to bring them to fruition.{close_quotes} Deep concern for the impacts that poorly regulated surface coal mining were having on the human and natural environment animated a decade-long struggle to establish national policy for surface coal mining. The result was the Surface Mining Control and Reclamation Act of 1977, P.L. 95-97 (SMCRA). Enacted to implement a national framework for regulating the environmental effects of surface coal mining, the law established a national program for controlling environmental impacts and ensuring the reclamation of lands affected by surface mining activity. From the perspective of nearly two decades, most observers would conclude that SMCRA is an example of successful policy implementation. Few national environmental laws have succeeded as well in terms of on-the-ground results: coal production has increased dramatically and industry has made significant gains in productivity while incorporating environmental and reclamation requirements in its daily operations, lowering the cost of reclamation and environmental protection. This article discusses and evaluates the SMCRA and its effect on surface coal mining. 2 tabs.

  4. 2008 Underground/Longwall Mining Buyer's Guide

    SciTech Connect (OSTI)

    2008-06-15

    The guide lists US companies supplying equipment and services to mines. An index by product category is included.

  5. 2009 underground/longwall mining buyer's guide

    SciTech Connect (OSTI)

    2009-06-15

    The guide lists US companies supplying equipment and services to underground mining operations. An index by product category is included.

  6. Colorado School of Mines | Department of Energy

    Office of Environmental Management (EM)

    Colorado School of Mines Colorado School of Mines Back row: Alex Dell, Zachary Weber, Aaron Troyer, Cabe Bonner, Jeremy Webb. Front row: Katherine Rooney, Jyotsana Gandhi, Kevin Tan, Kelsey Wokasch. Photo from Colorado School of Mines. Back row: Alex Dell, Zachary Weber, Aaron Troyer, Cabe Bonner, Jeremy Webb. Front row: Katherine Rooney, Jyotsana Gandhi, Kevin Tan, Kelsey Wokasch. Photo from Colorado School of Mines. Project Description Named after the Greek god of the west wind, Team Zephyrus

  7. Program of mining research, 1998--1999

    SciTech Connect (OSTI)

    1998-12-31

    The paper contains: Reflections on 1998; Project summaries; Noise; Injury prevention, ergonomics, and human factors; Surface, sand and gravel, and stone mines; Hazard detection and warning devices; Ground control -- metal/nonmetal mines; Ground control -- coal mines; Explosion and fire detection and suppression; Methane detection; Electrical hazards; Emerging technologies; Surveillance; Construction; Training and education; and Communication activity.

  8. Robot to the Mine Rescue

    Broader source: Energy.gov [DOE]

    To increase the speed of rescue efforts, scientists and engineers at the Energy Department’s Sandia National Laboratories recently developed a new robot, called the Gemini-Scout Mine Rescue Robot, that quickly finds dangers and provides relief to trapped miners.

  9. The quest data mining system

    SciTech Connect (OSTI)

    Agrawal, R.; Mehta, M.; Shafer, J.; Srikant, R.

    1996-12-31

    The goal of the Quest project at the IBM Almaden Research center is to develop technology to enable a new breed of data-intensive decision-support applications. This paper is a capsule summary of the current functionality and architecture of the Quest data mining System.

  10. Corner-cutting mining assembly

    DOE Patents [OSTI]

    Bradley, J.A.

    1981-07-01

    This invention resulted from a contract with the United States Department of Energy and relates to a mining tool. More particularly, the invention relates to an assembly capable of drilling a hole having a square cross-sectional shape with radiused corners. In mining operations in which conventional auger-type drills are used to form a series of parallel, cylindrical holes in a coal seam, a large amount of coal remains in place in the seam because the shape of the holes leaves thick webs between the holes. A higher percentage of coal can be mined from a seam by a means capable of drilling holes having a substantially square cross section. It is an object of this invention to provide an improved mining apparatus by means of which the amount of coal recovered from a seam deposit can be increased. Another object of the invention is to provide a drilling assembly which cuts corners in a hole having a circular cross section. These objects and other advantages are attained by a preferred embodiment of the invention.

  11. Corner-cutting mining assembly

    DOE Patents [OSTI]

    Bradley, John A. (San Antonio, TX)

    1983-01-01

    A mining assembly includes a primary rotary cutter mounted on one end of a support shaft and four secondary rotary cutters carried on the same support shaft and positioned behind the primary cutters for cutting corners in the hole cut by the latter.

  12. Mining into the new millennium

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2009-06-15

    After more than 3 years of production and a billion tons of coal shipped, Foundation Coal West, a subsidiary of Foundation Coal Holding Inc., continues to operate two of the original surface mines in Wyoming's Powder River Basin. The article describes equipment (conveyors, trucks, surface miners etc.) deployed at Belle Ayr and Eagle Butte PRB operations. 3 photos.

  13. Longwall mining of thin seams

    SciTech Connect (OSTI)

    Curth, E A

    1981-01-01

    Thin seam operations pose a challenge to the ingenuity of mining engineers to overcome the factor of human inconvenience in the restricted environment and associated high cost production. Surprisingly, low seam longwalls in the Federal Republic of Germany in an average thickness of 35 in. and dipping less than 18/sup 0/ come close to achieving the average production rate of all German longwall operations. They are all plow faces, and a consistent production of 3300 tons per day and a productivity of 40 tons per man shift are reported from one of the thin seam longwalls. These results were attained by reliable high-capacity equipment and roof support by shields that can be collapsed to as low as 22 inches. Maximum mining height for plow operated faces lies at 31.5 inches. Technology for mechanized mining of flat lying coalbeds less than 31.5 inches in thickness without rock cutting is not available, and firmness of coal, undulation of the strata, coalbed thickness variation, and the necessity of cutting rock, particularly through faults, set limits to plow application. The in-web shearer can be used in firm coal to a minimum mining height of 40 inches, and a daily production of 1650 to 2200 tons is reported from a longwall in the Saar district of Germany equipped with such a shearer and shields. Numerous in-web shearers are employed in the United Kingdom; reports as to their success are contradictory. Also, experience in the United States, though limited, has been negative. The steady increase in output from single drum shearer faces in Pennsylvania is a remarkable achievement, and occasional record breaking peaks in production indicate the potential of such mining. Technology development for the future is discussed.

  14. Comments of Qualcomm Incorporated | Department of Energy

    Office of Environmental Management (EM)

    Qualcomm Incorporated Comments of Qualcomm Incorporated Qualcomm is pleased to provide these detailed comments to the Department of Energy ("DOE" or "Department") on how current and future wireless broadband communications capabilities can support the energy management needs of electric utilities, businesses, and consumers, which include requirements for the evolving and growing Smart Grid. The DOE should be applauded for timely following-up on the recommendations in the

  15. Mines in the Four Corners anticipate growth

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2008-02-15

    Productive mines in the southwest deplete reserves, while the government drags its heels on new power projects. Production in Arizona and New Mexico has fallen 18% over the last four years to 34.1 million tons. With Chevron Mining's McKinley mine rapidly depleting its reserves the industry will continue to contract. In the last three years at least three large mines in the Four Corners have terminated operations. Three others remain captive operations: BHP Billiton's San Juan Underground and Navajo Surface operations and Peabody Energy's Kayenta surface mine. In 2006 the Black Mesa mine stopped producing coal. These four mines are isolated from the national railways. Peabody's new El Segundo surface mine near Grants, NM is increasing production. If the planned $3 billion Desert Rock coal-fired power plant is built this will present a new market for the Navajo mine. The article gives details about the state of the aforementioned mines and of the new King II coal mine on the northern periphery of the San Juan basin and discusses the state of plans for the Desert Rock Energy Project. 5 photos.

  16. Mining machine having vibration sensor

    SciTech Connect (OSTI)

    Peterson, C.R.

    1987-04-07

    This patent describes a mining machine having means for sensing property variations of the materials associated with a seam of a mine comprising: a cutting tool including a member rotatable about an axis, at least one cutter carried by the rotatable member at a point spaced from the axis for cutting material from the seam, a conductor rod carried by the rotatable member and held in releasable engagement with the cutter, the rod extending to the axis of the rotatable member to conduct to the axis, strain waves which are induced by variations in cutter vibration as the cutter encounters property variations of the materials associated with the seam, and a transducer located at the axis of the rotatable member in communication with the conductor rod to convert the strain waves in the rod to electric signals.

  17. WIRELESS MINE-WIDE TELECOMMUNICATIONS TECHNOLOGY

    SciTech Connect (OSTI)

    Zvi H. Meiksin

    2004-03-01

    A comprehensive mine-wide, two-way wireless voice and data communication system for the underground mining industry was developed. The system achieves energy savings through increased productivity and greater energy efficiency in meeting safety requirements within mines. The mine-wide system is comprised of two interfaced subsystems: a through-the-earth communications system and an in-mine communications system. The mine-wide system permits two-way communication among underground personnel and between underground and surface personnel. The system was designed, built, and commercialized. Several systems are in operation in underground mines in the United States. The use of these systems has proven they result in considerable energy savings. A system for tracking the location of vehicles and people within the mine was also developed, built and tested successfully. Transtek's systems are being used by the National Institute of Occupational Safety and Health (NIOSH) in their underground mine rescue team training program. This project also resulted in a spin-off rescue team lifeline and communications system. Furthermore, the project points the way to further developments that can lead to a GPS-like system for underground mines allowing the use of autonomous machines in underground mining operations, greatly reducing the amount of energy used in these operations. Some products developed under this program are transferable to applications in fields other than mining. The rescue team system is applicable to use by first responders to natural, accidental, or terrorist-caused building collapses. The in-mine communications system can be installed in high-rise buildings providing in-building communications to security and maintenance personnel as well as to first responders.

  18. Data mining and visualization techniques

    DOE Patents [OSTI]

    Wong, Pak Chung (Richland, WA); Whitney, Paul (Richland, WA); Thomas, Jim (Richland, WA)

    2004-03-23

    Disclosed are association rule identification and visualization methods, systems, and apparatus. An association rule in data mining is an implication of the form X.fwdarw.Y where X is a set of antecedent items and Y is the consequent item. A unique visualization technique that provides multiple antecedent, consequent, confidence, and support information is disclosed to facilitate better presentation of large quantities of complex association rules.

  19. Injury experience in coal mining, 1990

    SciTech Connect (OSTI)

    1991-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1990. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  20. ITP Mining: Mining Industry of the Future Mineral Processing Technology Roadmap

    Broader source: Energy.gov [DOE]

    In June 1998, the Chairman of the National Mining Association and the Secretary of energy entered into a Compact to pursue a collaborative technology research partnership, the Mining Industry of the Future.

  1. ORS 517.705 Exploration Permit Regulations for Mining and Mining...

    Open Energy Info (EERE)

    .705 Exploration Permit Regulations for Mining and Mining Claims Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: ORS 517.705...

  2. Bauma returns with a large mining component

    SciTech Connect (OSTI)

    Casteel, K.

    2007-04-15

    The world's largest construction trade fair is also a major mining show covering equipment from excavation to product load out. This comprehensive preview of the bauma 2007 exposition (23-29 April 2007) describes construction equipment which will be displayed, concentrating on mining equipment. It includes drilling equipment; earthmoving, excavation and grading machinery; loading and hauling machines; underground mining equipment; crushing and screening equipment; conveyors; and pumps. 25 photos.

  3. Mining Industry Profile | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    These mined minerals include coal, metals such as iron, copper, or zinc, and industrial minerals such as potash, limestone, and other crushed rocks. Oil and natural gas extraction ...

  4. DOE - Fossil Energy: Coal Mining and Transportation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mining Fossil Energy Study Guides Coal Mining and Transportation Coal Miners - One type of mining, called "longwall mining", uses a rotating blade to shear coal away from the underground seam. - In the centuries since early humans learned that the black rocks they picked up on the ground would burn, we have had to look for coal below that was hidden below the earth's surface. One of the areas it was easiest to find was where it appeared as one of many layers of materials along the side

  5. PP-85-A Westmin Mines, Inc.

    Broader source: Energy.gov [DOE]

    Presidential Permit authorizing Westmin Mines, Inc. to construct, operate, and maintain electric transmission facilities at the U.S. -Canada Border.

  6. WIPP Mine Rescue Team Wins Colorado Competition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    including the current National Mine Rescue Competition Champions (OCI, Inc. from Rock Springs, Wyoming) and three former national champions. Faced with solving problems in the...

  7. Combined cycle power plant incorporating coal gasification

    DOE Patents [OSTI]

    Liljedahl, Gregory N. (Tariffville, CT); Moffat, Bruce K. (Simsbury, CT)

    1981-01-01

    A combined cycle power plant incorporating a coal gasifier as the energy source. The gases leaving the coal gasifier pass through a liquid couplant heat exchanger before being used to drive a gas turbine. The exhaust gases of the gas turbine are used to generate both high pressure and low pressure steam for driving a steam turbine, before being exhausted to the atmosphere.

  8. Data mining for ontology development.

    SciTech Connect (OSTI)

    Davidson, George S.; Strasburg, Jana; Stampf, David; Neymotin,Lev; Czajkowski, Carl; Shine, Eugene; Bollinger, James; Ghosh, Vinita; Sorokine, Alexandre; Ferrell, Regina; Ward, Richard; Schoenwald, David Alan

    2010-06-01

    A multi-laboratory ontology construction effort during the summer and fall of 2009 prototyped an ontology for counterfeit semiconductor manufacturing. This effort included an ontology development team and an ontology validation methods team. Here the third team of the Ontology Project, the Data Analysis (DA) team reports on their approaches, the tools they used, and results for mining literature for terminology pertinent to counterfeit semiconductor manufacturing. A discussion of the value of ontology-based analysis is presented, with insights drawn from other ontology-based methods regularly used in the analysis of genomic experiments. Finally, suggestions for future work are offered.

  9. Self advancing mine roof supports

    SciTech Connect (OSTI)

    Seddon, J.; Jones, F.

    1985-03-19

    A self-advancing mine-roof-support for use in or aligned with a main roadway or gate has a floor-engaging part and a roof engaging part spaced apart by extensible load-bearing prop or jack means, and engagement means for a face-conveyor and a transversely acting transfer conveyor whereby their relative positions are constrained to facilitate discharge of mineral from one conveyor to the other. The engagement means for the face conveyor comprises sliding anchor beams that assure maintenance of the relative attitudes of the support and the face conveyor and the transfer conveyor is held fore and aft of the support.

  10. Energy Efficiency Measures to Incorporate into Remodeling Projects...

    Office of Scientific and Technical Information (OSTI)

    Energy Efficiency Measures to Incorporate into Remodeling Projects Citation Details In-Document Search Title: Energy Efficiency Measures to Incorporate into Remodeling Projects...

  11. U.S. CHP Installations Incorporating Thermal Energy Storage ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CHP Installations Incorporating Thermal Energy Storage (TES) andor Turbine Inlet Cooling (TIC), September 2003 U.S. CHP Installations Incorporating Thermal Energy Storage (TES) ...

  12. BIG SUN Energy Technology Incorporation | Open Energy Information

    Open Energy Info (EERE)

    Technology Incorporation Place: Taiwan Zip: 303 Sector: Solar Product: Taiwan-based solar cell manufacturer. References: BIG SUN Energy Technology Incorporation1 This...

  13. National Policy Assurances to be Incorporated as Award Terms...

    Energy Savers [EERE]

    National Policy Assurances to be Incorporated as Award Terms National Policy Assurances to be Incorporated as Award Terms The following are the National Policy Assurances which are...

  14. Longwall mining thrives in Colorado's North Fork Valley

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2006-08-15

    With mining units poised for record-setting capacity and rail service restored, these mines in Colorado's North Fork valley are ready to cut coal. 4 photos.

  15. DOE Evaluates Environmental Impacts of Uranium Mining on Government...

    Energy Savers [EERE]

    Evaluates Environmental Impacts of Uranium Mining on Government Land in Western Colorado DOE Evaluates Environmental Impacts of Uranium Mining on Government Land in Western...

  16. Colorado School of Mines - Colorado Energy Research Institute...

    Open Energy Info (EERE)

    Mines - Colorado Energy Research Institute Jump to: navigation, search Name: Colorado School of Mines - Colorado Energy Research Institute Address: 1500 Illinois Street Place:...

  17. Montana Bureau of Mines and Geology Website | Open Energy Information

    Open Energy Info (EERE)

    Web Site: Montana Bureau of Mines and Geology Website Abstract Provides access to digital information on Montana's geology. Author Montana Bureau of Mines and Geology...

  18. Inner Mongolia Fengwei New Energy Mining Co Ltd | Open Energy...

    Open Energy Info (EERE)

    Fengwei New Energy Mining Co Ltd Jump to: navigation, search Name: Inner Mongolia Fengwei New Energy Mining Co Ltd Place: Inner Mongolia Autonomous Region, China Product:...

  19. U.S. Mining Industry Energy Bandwidth Study

    Broader source: Energy.gov [DOE]

    This bandwidth analysis report was conducted to assist the ITP Mining R&D program in identifying energy-saving opportunities in coal, metals, and mineral mining.

  20. Zhangjiajie Guinie Mining Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Zhangjiajie Guinie Mining Co Ltd Jump to: navigation, search Name: Zhangjiajie Guinie Mining Co Ltd Place: Zhangjiajie, Hunan Province, China Product: Miner, refiner and processor...

  1. Mines Welcomes Middle School Students | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Science and Technology. The students spent the day at Mines to learn about Earth, energy, the environment, critical materials and mining. The students enjoyed a chemistry show ...

  2. Colorado School of Mines Technology Marketing Summaries - Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Colorado School of Mines Technology Marketing Summaries Here you'll find marketing summaries for technologies available for licensing from the Colorado School of Mines (CSM). The...

  3. Emissive sensors and devices incorporating these sensors

    DOE Patents [OSTI]

    Swager, Timothy M; Zhang, Shi-Wei

    2013-02-05

    The present invention generally relates to luminescent and/or optically absorbing compositions and/or precursors to those compositions, including solid films incorporating these compositions/precursors, exhibiting increased luminescent lifetimes, quantum yields, enhanced stabilities and/or amplified emissions. The present invention also relates to sensors and methods for sensing analytes through luminescent and/or optically absorbing properties of these compositions and/or precursors. Examples of analytes detectable by the invention include electrophiles, alkylating agents, thionyl halides, and phosphate ester groups including phosphoryl halides, cyanides and thioates such as those found in certain chemical warfare agents. The present invention additionally relates to devices and methods for amplifying emissions, such as those produced using the above-described compositions and/or precursors, by incorporating the composition and/or precursor within a polymer having an energy migration pathway. In some cases, the compositions and/or precursors thereof include a compound capable of undergoing a cyclization reaction.

  4. Coal mine directory: United States and Canada

    SciTech Connect (OSTI)

    2004-07-01

    The directory gives a state-by-state listing of all US and Canadian coal producers. It contains contact information as well as the type of mine, production statistics, coal composition, transportation methods etc. A statistical section provides general information about the US coal industry, preparation plants, and longwall mining operations.

  5. Statistically significant relational data mining :

    SciTech Connect (OSTI)

    Berry, Jonathan W.; Leung, Vitus Joseph; Phillips, Cynthia Ann; Pinar, Ali; Robinson, David Gerald; Berger-Wolf, Tanya; Bhowmick, Sanjukta; Casleton, Emily; Kaiser, Mark; Nordman, Daniel J.; Wilson, Alyson G.

    2014-02-01

    This report summarizes the work performed under the project (3z(BStatitically significant relational data mining.(3y (BThe goal of the project was to add more statistical rigor to the fairly ad hoc area of data mining on graphs. Our goal was to develop better algorithms and better ways to evaluate algorithm quality. We concetrated on algorithms for community detection, approximate pattern matching, and graph similarity measures. Approximate pattern matching involves finding an instance of a relatively small pattern, expressed with tolerance, in a large graph of data observed with uncertainty. This report gathers the abstracts and references for the eight refereed publications that have appeared as part of this work. We then archive three pieces of research that have not yet been published. The first is theoretical and experimental evidence that a popular statistical measure for comparison of community assignments favors over-resolved communities over approximations to a ground truth. The second are statistically motivated methods for measuring the quality of an approximate match of a small pattern in a large graph. The third is a new probabilistic random graph model. Statisticians favor these models for graph analysis. The new local structure graph model overcomes some of the issues with popular models such as exponential random graph models and latent variable models.

  6. Reclamation of acidic copper mine tailings using municipal biosolids

    SciTech Connect (OSTI)

    Rogers, M.T.; Thompson, T.L.; Bengson, S.A.

    1998-12-31

    Reclamation of copper mine tailings in a cost effective, successful, and sustainable manner is an ongoing area of evaluation in the arid southwest. A study was initiated in September, 1996 near Hayden, Arizona to evaluate the use of municipal biosolids for reclaiming acidic copper mine tailings (pH of 2.5 to 4.0). The main objectives of the study were to (1) define an appropriate level of biosolids application for optimum plant growth, and (2) evaluate the effects of green waste and lime amendments. The experiment was a randomized complete block design with four biosolid rates of 20, 70, 100 and 135 dry tons/acre, three amendment treatments (none, green waste, and green waste plus lime); with three replications. Non-replicated controls (no treatment, green waste only and lime only) were included for comparison. Shortly after biosolids incorporation to a depth of 10--12 inches, composite soil samples (0--12 inches) of each plot were taken. Biosolids incorporation increased the pH of the tailings (>5.75) and additional increases in pH were noted with lime application. In January 1997, the plots were seeded and sprinkler irrigation was commenced. A total of 4.47 inches of rainfall and 3.8 inches of irrigation were applied until harvest in May 1997. Data from the first growing season indicates optimum growth (>66 lbs/acre) at biosolids rates of 70--100 dry tons/acre. There was a significant positive effect on growth of green waste and lime amendments. Surface NO{sub 3}-N concentrations in biosolids amended plots were greatly reduced (from 23 to 6 mg/kg) by addition of green waste. There was no evidence for NO{sub 3}N leaching below 12 inches.

  7. MINEs: Open access databases of computationally predicted enzyme promiscuity products for untargeted metabolomics

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jeffryes, James G.; Colastani, Ricardo L.; Elbadawi-Sidhu, Mona; Kind, Tobias; Niehaus, Thomas D.; Broadbelt, Linda J.; Hanson, Andrew D.; Fiehn, Oliver; Tyo, Keith E. J.; Henry, Christopher S.

    2015-08-28

    Metabolomics have proven difficult to execute in an untargeted and generalizable manner. Liquid chromatography–mass spectrometry (LC–MS) has made it possible to gather data on thousands of cellular metabolites. However, matching metabolites to their spectral features continues to be a bottleneck, meaning that much of the collected information remains uninterpreted and that new metabolites are seldom discovered in untargeted studies. These challenges require new approaches that consider compounds beyond those available in curated biochemistry databases. Here we present Metabolic In silico Network Expansions (MINEs), an extension of known metabolite databases to include molecules that have not been observed, but are likelymore » to occur based on known metabolites and common biochemical reactions. We utilize an algorithm called the Biochemical Network Integrated Computational Explorer (BNICE) and expert-curated reaction rules based on the Enzyme Commission classification system to propose the novel chemical structures and reactions that comprise MINE databases. Starting from the Kyoto Encyclopedia of Genes and Genomes (KEGG) COMPOUND database, the MINE contains over 571,000 compounds, of which 93% are not present in the PubChem database. However, these MINE compounds have on average higher structural similarity to natural products than compounds from KEGG or PubChem. MINE databases were able to propose annotations for 98.6% of a set of 667 MassBank spectra, 14% more than KEGG alone and equivalent to PubChem while returning far fewer candidates per spectra than PubChem (46 vs. 1715 median candidates). Application of MINEs to LC–MS accurate mass data enabled the identity of an unknown peak to be confidently predicted. MINE databases are freely accessible for non-commercial use via user-friendly web-tools at http://minedatabase.mcs.anl.gov and developer-friendly APIs. MINEs improve metabolomics peak identification as compared to general chemical databases whose results include irrelevant synthetic compounds. MINEs complement and expand on previous in silico generated compound databases that focus on human metabolism. We are actively developing the database; future versions of this resource will incorporate transformation rules for spontaneous chemical reactions and more advanced filtering and prioritization of candidate structures.« less

  8. MINEs: Open access databases of computationally predicted enzyme promiscuity products for untargeted metabolomics

    SciTech Connect (OSTI)

    Jeffryes, James G.; Colastani, Ricardo L.; Elbadawi-Sidhu, Mona; Kind, Tobias; Niehaus, Thomas D.; Broadbelt, Linda J.; Hanson, Andrew D.; Fiehn, Oliver; Tyo, Keith E. J.; Henry, Christopher S.

    2015-08-28

    Metabolomics have proven difficult to execute in an untargeted and generalizable manner. Liquid chromatographymass spectrometry (LCMS) has made it possible to gather data on thousands of cellular metabolites. However, matching metabolites to their spectral features continues to be a bottleneck, meaning that much of the collected information remains uninterpreted and that new metabolites are seldom discovered in untargeted studies. These challenges require new approaches that consider compounds beyond those available in curated biochemistry databases. Here we present Metabolic In silico Network Expansions (MINEs), an extension of known metabolite databases to include molecules that have not been observed, but are likely to occur based on known metabolites and common biochemical reactions. We utilize an algorithm called the Biochemical Network Integrated Computational Explorer (BNICE) and expert-curated reaction rules based on the Enzyme Commission classification system to propose the novel chemical structures and reactions that comprise MINE databases. Starting from the Kyoto Encyclopedia of Genes and Genomes (KEGG) COMPOUND database, the MINE contains over 571,000 compounds, of which 93% are not present in the PubChem database. However, these MINE compounds have on average higher structural similarity to natural products than compounds from KEGG or PubChem. MINE databases were able to propose annotations for 98.6% of a set of 667 MassBank spectra, 14% more than KEGG alone and equivalent to PubChem while returning far fewer candidates per spectra than PubChem (46 vs. 1715 median candidates). Application of MINEs to LCMS accurate mass data enabled the identity of an unknown peak to be confidently predicted. MINE databases are freely accessible for non-commercial use via user-friendly web-tools at http://minedatabase.mcs.anl.gov and developer-friendly APIs. MINEs improve metabolomics peak identification as compared to general chemical databases whose results include irrelevant synthetic compounds. MINEs complement and expand on previous in silico generated compound databases that focus on human metabolism. We are actively developing the database; future versions of this resource will incorporate transformation rules for spontaneous chemical reactions and more advanced filtering and prioritization of candidate structures.

  9. Incorporation of noble metals into aerogels

    DOE Patents [OSTI]

    Hair, Lucy M.; Sanner, Robert D.; Coronado, Paul R.

    1998-01-01

    Aerogels or xerogels containing atomically dispersed noble metals for applications such environmental remediation. New noble metal precursors, such as Pt--Si or Pd(Si--P).sub.2, have been created to bridge the incompatibility between noble metals and oxygen, followed by their incorporation into the aerogel or xerogel through sol-gel chemistry and processing. Applications include oxidation of hydrocarbons and reduction of nitrogen oxide species, complete oxidation of volatile organic carbon species, oxidative membranes for photocatalysis and partial oxidation for synthetic applications.

  10. Incorporation of noble metals into aerogels

    DOE Patents [OSTI]

    Hair, L.M.; Sanner, R.D.; Coronado, P.R.

    1998-12-22

    Aerogels or xerogels containing atomically dispersed noble metals for applications such as environmental remediation are disclosed. New noble metal precursors, such as Pt--Si or Pd(Si--P){sub 2}, have been created to bridge the incompatibility between noble metals and oxygen, followed by their incorporation into the aerogel or xerogel through sol-gel chemistry and processing. Applications include oxidation of hydrocarbons and reduction of nitrogen oxide species, complete oxidation of volatile organic carbon species, oxidative membranes for photocatalysis and partial oxidation for synthetic applications.

  11. Radiation collimator and systems incorporating same

    DOE Patents [OSTI]

    Norman, Daren R.; Yoon, Woo Y.; Jones, James L.; Haskell, Kevin J.; Bennett, Brion D.; Tschaggeny, Charles W.; Jones, Warren F.

    2011-09-13

    A collimator including a housing having disposed therein a shield element surrounding a converter core in which a photon beam is generated from electrons emanating from a linear accelerator. A beam channeler longitudinally adjacent the shield element has a beam aperture therethrough coaxially aligned with, and of the same diameter as, an exit bore of the converter core. A larger entry bore in the converter core is coaxial with, and longitudinally separated from, the exit bore thereof. Systems incorporating the collimator are also disclosed.

  12. Enhanced carbon dioxide capture upon incorporation of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    N,N'-dimethylethylenediamine in the metal-organic framework CuBTTri | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Enhanced carbon dioxide capture upon incorporation of N,N'-dimethylethylenediamine in the metal-organic framework CuBTTri Previous Next List Thomas M. McDonald, Deanna M. D'Alessandro, Rajamani Krishna and Jeffrey R. Long, Chem. Sci., 2011,2, 2022-2028 DOI: 10.1039/C1SC00354B Graphical abstract: Enhanced carbon dioxide capture upon

  13. Method of underground mining by pillar extraction

    DOE Patents [OSTI]

    Bowen, Ray J. (1879 Delann, Salt Lake City, UT 84121); Bowen, William R. (1636 Sunnydale La., Salt Lake City, UT 84108)

    1980-08-12

    A method of sublevel caving and pillar and top coal extraction for mining thick coal seams includes the advance mining of rooms and crosscuts along the bottom of a seam to a height of about eight feet, and the retreat mining of the top coal from the rooms, crosscuts and portions of the pillars remaining from formation of the rooms and cross-cuts. In the retreat mining, a pocket is formed in a pillar, the top coal above the pocket is drilled, charged and shot, and then the fallen coal is loaded by a continuous miner so that the operator remains under a roof which has not been shot. The top coal from that portion of the room adjacent the pocket is then mined, and another pocket is formed in the pillar. The top coal above the second pocket is mined followed by the mining of the top coal of that portion of the room adjacent the second pocket, all by use of a continuous miner which allows the operator to remain under a roof portion which has not been shot.

  14. Mined land reclamation in Wisconsin since 1973

    SciTech Connect (OSTI)

    Hunt, T.C.

    1989-01-01

    Reclamation has long been recognized as an essential action necessary to mitigate the degradation of land caused by mining activities. But, it is only within the past several decades that reclamation has become an integral component of the mineral extraction process. While the Metallic Mining Reclamation Act (MMRA) was passed in 1973, Wisconsin is yet to enact comprehensive state-wide reclamation requirements for mining other than metallic minerals and the code for metallic mining has yet to establish procedures and standards for reclamation success, specifically revegetation and postmining land use. This study integrates several interdisciplinary methodologies including a history of reclamation; an inventory and status report of mined lands; a critique and comparison of existing reclamation policy with previous state and current federal reclamation policies; in-field case studies of revegetation parameters, procedures, and performance standards; and an economic analysis of reclamation technology. This study makes three major recommendations: (1) The metallic mining code should be amended to establish vegetation parameters, measuring methods, and performance standards for revegetation success similar to those contained in the federal Surface Mining Control and Reclamation Act (SMCRA); (2) The metallic mining code should be amended to resolve semantic loopholes by clearly defining the endpoints of terms such as restoration, reclamation, and rehabilitation and by utilizing the reclamation continuum as a planning tool for determining acceptable postmining land use alternatives; and (3) Mandatory statewide nonmetallic legislation should be enacted to strengthen the mineral resource management program in Wisconsin by systematically and uniformly regulating the mining and reclamation of nonmetallic minerals, the state's most important mineral resource.

  15. Colorado School of Mines: Technical Design Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Design Report Design Team Contacts: Name Email Cell Aaron Troyer atroyer@mymail.mines.edu 928-486-2304 Jeremy Webb jewebb@mymail.mines.edu 727-537-9322 Quinn Weber zweber@mymail.mines.edu 805-458-3403 April 18, 2014 1 1. Introduction The Revolve, designed by Zephyrus, is a portable wind turbine capable of powering small electronic devices off the grid. The purpose of this document is to outline the process by which Zephyrus developed the Revolve from concept to final prototype to

  16. Method of locating underground mines fires

    DOE Patents [OSTI]

    Laage, Linneas (Eagam, MN); Pomroy, William (St. Paul, MN)

    1992-01-01

    An improved method of locating an underground mine fire by comparing the pattern of measured combustion product arrival times at detector locations with a real time computer-generated array of simulated patterns. A number of electronic fire detection devices are linked thru telemetry to a control station on the surface. The mine's ventilation is modeled on a digital computer using network analysis software. The time reguired to locate a fire consists of the time required to model the mines' ventilation, generate the arrival time array, scan the array, and to match measured arrival time patterns to the simulated patterns.

  17. Usibelli Coal Mine - Cleaner Energy, Brighter Future

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bureau of Indian Affairs Providers Conference The History of UCM Emil Usibelli started Usibelli Coal Mine in 1943 with used equipment and a contract for 10,000 tons of coal to the Army's Ladd Airfield. Three Generations of Usibelli Leadership Emil Usibelli founded the mine in 1943. Joe Usibelli Jr. has been president since 1987. Joe Usibelli became president in 1964. The People of Usibelli Coal Mine * About 112 Full-time employees * Average years of service: 12 * Average age in the workforce: 45

  18. Are surface coal mine sediment ponds working

    SciTech Connect (OSTI)

    Poe, M.L.; Betson, R.P.

    1985-12-09

    Flowrates and storm generated water quality data were collected at sedimentation ponds on four surface mines in the states of Pennsylvania, Maryland, and West Virginia. The water quality data were analyzed for suspended solids and settleable solids content, and particle size distribution. The results were compared to the effluent limitations guidelines for total suspended solids as promulgated under the Clean Water Act for Coal Mining Point Source Category and adopted under the Surface Mine Control and Reclamation Act of 1977 and the resulting state regulatory programs. 3 references, 1 figure, 2 tables.

  19. Optoelectronic devices incorporating fluoropolymer compositions for protection

    SciTech Connect (OSTI)

    Chen, Xuming; Chum, Pak-Wing S.; Howard, Kevin E.; Lopez, Leonardo C.; Sumner, William C.; Wu, Shaofu

    2015-12-22

    The fluoropolymer compositions of the present invention generally incorporate ingredients comprising one or more fluoropolymers, an ultraviolet light protection component (hereinafter UV protection component), and optionally one or more additional ingredients if desired. The UV protection component includes a combination of at least one hindered tertiary amine (HTA) compound having a certain structure and a weight average molecular weight of at least 1000. This tertiary amine is used in combination with at least one organic, UV light absorbing compound (UVLA compound) having a weight average molecular weight greater than 500. When the HTA compound and the UVLA compound are selected according to principles of the present invention, the UV protection component provides fluoropolymer compositions with significantly improved weatherability characteristics for protecting underlying materials, features, structures, components, and/or the like. In particular, fluoropolymer compositions incorporating the UV protection component of the present invention have unexpectedly improved ability to resist blackening, coloration, or other de gradation that may be caused by UV exposure. As a consequence, devices protected by these compositions would be expected to have dramatically improved service life. The compositions have a wide range of uses but are particularly useful for forming protective layers in optoelectronic devices.

  20. Incorporating Experience Curves in Appliance Standards Analysis

    SciTech Connect (OSTI)

    Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery; Kantner, Colleen; Lekov, Alex; Meyers, Stephen; Rosenquist, Gregory; Buskirk, Robert Van; Yang, Hung-Chia; Desroches, Louis-Benoit

    2011-10-31

    The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.

  1. Paramont's Black Bear No. 4 mine does it right, again

    SciTech Connect (OSTI)

    Sanda, A.

    2007-07-15

    The Paramont Coal Company Virginia, LLC, a subsidiary of Alpha Natural Resources, recently won the '2007 overall award for excellence in mining and reclamation from the Virginia Division of Mined Land Reclamation and the Virginia Mining Association. Coal People Magazine recently visited Black Bear No. 4 mine where a settling pond was being removed and stream bed placed to drain the area, part of the 451-acre award winning reclamation project. The article recounts discussions with mining engineers about the company's operations with emphasis on the Black Bear No. 4 mine. Black Bear No. 1 mine won five state and national awards last year for conservation and land management practices. 8 photos.

  2. ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (December 2002) | Department of Energy Energy and Environmental Profile of the U.S. Mining Industry (December 2002) ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry (December 2002) PDF icon Cover, Preface, and Table of Contents PDF icon Chapter 1 - Mining Overview PDF icon Chapter 2 - Coal PDF icon Chapter 3 - Potash, Soda Ash, and Borates PDF icon Chapter 4 - Iron PDF icon Chapter 5 - Copper PDF icon Chapter 6 - Lead and Zinc PDF icon Chapter 7 - Gold and Silver PDF

  3. Knight Hawk adapts highwall mining for Southern Illinois

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2007-10-15

    A few years ago while planning their first underground operation and trying to decide how to mine shallow seams, Knight Hawk purchased a 'Superior Highwall Miner' (SHM). Since then this small innovative company has been pioneering the use of highwall mining in a trenching application in for example the Illinois Basin. Highwall mining is very suitable for contour mining in Appalachia. The article discusses the recent improvements and the advantages of SHM mining systems. 3 photos.

  4. CMI Course Inventory: Mining Engineering | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Course Inventory: Mining Engineering Mining Engineering Of the six CMI Team members that are educational institutions, one offers a major in Mining Engineering: Colorado School of Mines. CMI Education and Outreach group at Colorado School of Mines developed an inventory of courses offered by CMI Team members that are related to rare earths and critical materials. Other courses are available in these areas: Geology Engineering/Geochemistry Metallurgical Engineering/Materials Science Chemistry

  5. Fuelcell-Hybrid Mine loader (LHD)

    SciTech Connect (OSTI)

    James L Dippo; Tim Erikson; Kris Hess

    2009-07-10

    The fuel cell hybrid mine loader project, sponsored by a government-industry consortium, was implemented to determine the viability of proton exchange membrane (PEM) fuel cells in underground mining applications. The Department of Energy (DOE) sponsored this project with cost-share support from industry. The project had three main goals: (1) to develop a mine loader powered by a fuel cell, (2) to develop associated metal-hydride storage and refueling systems, and (3) to demonstrate the fuel cell hybrid loader in an underground mine in Nevada. The investigation of a zero-emissions fuel cell power plant, the safe storage of hydrogen, worker health advantages (over the negative health effects associated with exposure to diesel emissions), and lower operating costs are all key objectives for this project.

  6. WIPP Mine Rescue Team Wins, Retires Trophy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    third. Kevin Cummins of IMC-Kalium won first place in the benchman's competition. Joe Baca of the WIPP Blue Team won second place. Mine Rescue teams have been participating in...

  7. The Silicon Mine | Open Energy Information

    Open Energy Info (EERE)

    produce solar grade polysilicon suitable for the production of wafers or as the base material for the manufacture of solar cells. References: The Silicon Mine1 This article is a...

  8. Rock mechanics design in mining and tunneling

    SciTech Connect (OSTI)

    Bieniawski, Z.T.

    1984-01-01

    This book introduces the design process as applied to rock mechanics aspects of underground mining and tunneling. Topics covered include a historical perspective, the design process in engineering, empirical methods of design, observational methods of design, and guided design.

  9. WIPP Receives Top Mine Safety Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Top Mine Safety Award CARLSBAD, N.M., September 18, 2013 - The U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) received top safety honors from the New Mexico...

  10. Radiation shielding materials and containers incorporating same

    DOE Patents [OSTI]

    Mirsky, Steven M. (Greenbelt, MD); Krill, Stephen J. (Arlington, VA); Murray, Alexander P. (Gaithersburg, MD)

    2005-11-01

    An improved radiation shielding material and storage systems for radioactive materials incorporating the same. The PYRolytic Uranium Compound ("PYRUC") shielding material is preferably formed by heat and/or pressure treatment of a precursor material comprising microspheres of a uranium compound, such as uranium dioxide or uranium carbide, and a suitable binder. The PYRUC shielding material provides improved radiation shielding, thermal characteristic, cost and ease of use in comparison with other shielding materials. The shielding material can be used to form containment systems, container vessels, shielding structures, and containment storage areas, all of which can be used to house radioactive waste. The preferred shielding system is in the form of a container for storage, transportation, and disposal of radioactive waste. In addition, improved methods for preparing uranium dioxide and uranium carbide microspheres for use in the radiation shielding materials are also provided.

  11. Solar cells incorporating light harvesting arrays

    DOE Patents [OSTI]

    Lindsey, Jonathan S.; Meyer, Gerald J.

    2003-07-22

    A solar cell incorporates a light harvesting array that comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: ##EQU1## wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2 ; and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

  12. Solar cells incorporating light harvesting arrays

    DOE Patents [OSTI]

    Lindsey, Jonathan S. (Raleigh, NC); Meyer, Gerald J. (Baltimore, MD)

    2002-01-01

    A solar cell incorporates a light harvesting array that comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2 ; and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

  13. Radiation Shielding Materials and Containers Incorporating Same

    DOE Patents [OSTI]

    Mirsky, Steven M.; Krill, Stephen J.; and Murray, Alexander P.

    2005-11-01

    An improved radiation shielding material and storage systems for radioactive materials incorporating the same. The PYRolytic Uranium Compound (''PYRUC'') shielding material is preferably formed by heat and/or pressure treatment of a precursor material comprising microspheres of a uranium compound, such as uranium dioxide or uranium carbide, and a suitable binder. The PYRUC shielding material provides improved radiation shielding, thermal characteristic, cost and ease of use in comparison with other shielding materials. The shielding material can be used to form containment systems, container vessels, shielding structures, and containment storage areas, all of which can be used to house radioactive waste. The preferred shielding system is in the form of a container for storage, transportation, and disposal of radioactive waste. In addition, improved methods for preparing uranium dioxide and uranium carbide microspheres for use in the radiation shielding materials are also provided.

  14. Dragline mining returns to western Kentucky

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2009-05-15

    Armstrong Coal Co. now owns three Page draglines-one now operating at the Midway Surface mine, one due to go into operation at the Equality surface mine and a third that is being rebuilt also for use there. Armstrong is banking on the economics of scale to once again prove that these older machines are still the most efficient way to move large volumes of overburden. 4 photos.

  15. Incorporating the min-max mesh optimization method within the...

    Office of Scientific and Technical Information (OSTI)

    Incorporating the min-max mesh optimization method within the Target-Matrix Paradigm. Citation Details In-Document Search Title: Incorporating the min-max mesh optimization method...

  16. A Study of SSI Effects Incorporating Seismic Wave Incoherence...

    Office of Environmental Management (EM)

    A Study of SSI Effects Incorporating Seismic Wave Incoherence within the DOE Complex A Study of SSI Effects Incorporating Seismic Wave Incoherence within the DOE Complex A Study of...

  17. ESF Mine Power Center Platforms

    SciTech Connect (OSTI)

    T.A. Misiak

    2000-02-10

    The purpose and objective of this analysis is to structurally evaluate the existing Exploratory Studies Facility (ESF) mine power center (MPC) support frames and to design service platforms that will attach to the MPC support frames. This analysis follows the Development Plan titled ''Produce Additional Design for Title 111 Evaluation Report'' (CRWMS M&O 1999a). This analysis satisfies design recommended in the ''Title III Evaluation Report for the Surface and Subsurface Power System'' (CRWMS M&O 1999b, Section 7.6) and concurred with in the ''System Safety Evaluation of Title 111 Evaluation Reports Recommended Work'' (Gwyn 1999, Section 10.1.1). This analysis does not constitute a level-3 deliverable, a level-4 milestone, or a supporting work product. This document is not being prepared in support of the Monitored Geologic Repository (MGR) Site Recommendation (SR), Environmental Impact Statement (EIS), or License Application (LA) and should not be cited as a reference in the MGR SR, EIS, or LA.

  18. Incorporating Energy Efficiency into Multifamily, Affordable Housing Rehabilitation Projects (201)

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Incorporating Energy Efficiency into Multifamily, Affordable Housing Rehabilitation Projects (201).

  19. Energy Efficiency Measures to Incorporate into Remodeling Projects...

    Office of Scientific and Technical Information (OSTI)

    Efficiency Measures to Incorporate into Remodeling Projects Liaukus, C. 32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION RESIDENTIAL; RESIDENTIAL BUILDINGS; BARA; BUILDING...

  20. Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Fuels in Its Fleet Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet to someone by E-mail Share Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Facebook Tweet about Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Twitter Bookmark Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Google Bookmark Alternative Fuels Data Center: Blue Ridge

  1. Remining to reclaim abandoned mined lands: Virginia`s initiative

    SciTech Connect (OSTI)

    Zipper, C.E.; Lambert, B.

    1998-12-31

    Abandoned Mined Lands (AML) are lands that were mined prior to implementation of the federal Surface Mining Control and Reclamation Act (SMCRA) in 1977, but were inadequately reclaimed. Re-mining of AML is being conducted on a routine basis by coal-mining operations in eastern states such as Virginia. Re-mining is a potentially important means of reclaiming AML. However, under current policies, re-mining operations often fail to permit and reclaim priority 1, 2, and 3 AML, especially those areas which present the most severe environmental problems. This paper describes policy issues which affect the potential for AML reclamation by re-mining operations in mountainous mining areas, such as Virginia; efforts underway in Virginia which seek to resolve those issues; and progress achieved to date under that initiative.

  2. Incorporating Behavior Change Efforts Into Energy Efficiency Programs |

    Energy Savers [EERE]

    Department of Energy Incorporating Behavior Change Efforts Into Energy Efficiency Programs Incorporating Behavior Change Efforts Into Energy Efficiency Programs Better Buildings Residential Network Program Sustainability Peer Exchange Call Series: Incorporating Behavior Change Efforts into Energy Efficiency Programs Call Slides and Discussion Summary, July 10, 2014. PDF icon Call Slides and Discussion Summary More Documents & Publications Complementary Energy and Health Strategies

  3. Guidance on Incorporating EPA's Pollution Prevention Strategy into the

    Office of Environmental Management (EM)

    Environmental Review Process | Department of Energy on Incorporating EPA's Pollution Prevention Strategy into the Environmental Review Process Guidance on Incorporating EPA's Pollution Prevention Strategy into the Environmental Review Process The guidance discusses the Environmental Protection Agency's definition of pollution prevention; how to incorporate pollution prevention into the EPA environmental review process and interagency liaison function; and federal pollution prevention awards

  4. Regulating for the long term: SMCRA and acid mine drainage

    SciTech Connect (OSTI)

    Shea, C.W.

    1995-12-31

    With the passage of the Surface Mining Control and Reclamation Act of 1977 (SMCRA), regulators and industry representatives expected to solve the problem of pollution of the Nation`s waterways caused by acidic discharges from coal mines. Eighteen years after the passage of SMCRA, hard issues of predicting, regulating and treating acid mine drainage remain. Acid mine drainage is most common in the coal seams of the Midwest and Appalachia: Pennsylvania, West Virginia, Maryland, Ohio, Illinois, and Tennessee. This article discusses regulation of coal mines and acid mine drainage for the long term.

  5. Carbon Sequestration on Surface Mine Lands

    SciTech Connect (OSTI)

    Donald Graves; Christopher Barton; Richard Sweigard; Richard Warner; Carmen Agouridis

    2006-03-31

    Since the implementation of the federal Surface Mining Control and Reclamation Act of 1977 (SMCRA) in May of 1978, many opportunities have been lost for the reforestation of surface mines in the eastern United States. Research has shown that excessive compaction of spoil material in the backfilling and grading process is the biggest impediment to the establishment of productive forests as a post-mining land use (Ashby, 1998, Burger et al., 1994, Graves et al., 2000). Stability of mine sites was a prominent concern among regulators and mine operators in the years immediately following the implementation of SMCRA. These concerns resulted in the highly compacted, flatly graded, and consequently unproductive spoils of the early post-SMCRA era. However, there is nothing in the regulations that requires mine sites to be overly compacted as long as stability is achieved. It has been cultural barriers and not regulatory barriers that have contributed to the failure of reforestation efforts under the federal law over the past 27 years. Efforts to change the perception that the federal law and regulations impede effective reforestation techniques and interfere with bond release must be implemented. Demonstration of techniques that lead to the successful reforestation of surface mines is one such method that can be used to change perceptions and protect the forest ecosystems that were indigenous to these areas prior to mining. The University of Kentucky initiated a large-scale reforestation effort to address regulatory and cultural impediments to forest reclamation in 2003. During the three years of this project 383,000 trees were planted on over 556 acres in different physiographic areas of Kentucky (Table 1, Figure 1). Species used for the project were similar to those that existed on the sites before mining was initiated (Table 2). A monitoring program was undertaken to evaluate growth and survival of the planted species as a function of spoil characteristics and reclamation practice. In addition, experiments were integrated within the reforestation effort to address specific questions pertaining to sequestration of carbon (C) on these sites.

  6. Noise exposures in US coal mines

    SciTech Connect (OSTI)

    Seiler, J.P.; Valoski, M.P.; Crivaro, M.A.

    1994-05-01

    Mine Safety and Health Administration (MSHA) inspectors conduct full-shift environmental noise surveys to determine the occupational noise levels to which coal miners are exposed. These noise surveys are performed to determine compliance with the noise standard promulgated under the Federal Mine Safety and Health Act of 1977. Data from over 60,000 full-shift noise surveys conducted from fiscal year 1986 through 1992 were entered into a computer data base to facilitate analysis. This paper presents the mean and standard deviation of over 60,000 full-shift noise dose measurements for various underground and surface coal mining occupations. Additionally, it compares and contrasts the levels with historical noise exposure measurements for selected coal mining occupations that were published in the 1970`s. The findings were that the percentage of miners surveyed that were subjected to noise exposures above 100%, neglecting personal hearing protectors, were 26.5% and 21.6% for surface and underground mining, respectively. Generally, the trend is that the noise exposures for selected occupations have decreased since the 1970`s.

  7. Active mines in Arizona - 1993. Directory 40

    SciTech Connect (OSTI)

    Phillips, K.A.; Niemuth, N.J.; Bain, D.R.

    1992-01-01

    A directory of the active mines in Arizona is presented. The directory was compiled in November, 1992 from field visits and information received by the Department's technical staff. For the purpose of this directory, an active mine is defined as a mine in continuous operation, either in production or under full-time development for production. Custom milling operations that are active or available on a full-time basis are also included in the directory. It is acknowledged that there are additional mines not listed that are in an exploration, evaluation, or part-time development phase. There are others where production is on an intermittent basis that are not listed. The report is dependent on the cooperation of government agencies, private industry, and individuals who voluntarily provide information on their projects and activities. The directory is arranged alphabetically by company name. Each listing includes corporate addresses, mine name and location, operation description, and key personnel. The listing for the sand and gravel operations include name, address, and phone number.

  8. Incorporating psychological influences in probabilistic cost analysis

    SciTech Connect (OSTI)

    Kujawski, Edouard; Alvaro, Mariana; Edwards, William

    2004-01-08

    Today's typical probabilistic cost analysis assumes an ''ideal'' project that is devoid of the human and organizational considerations that heavily influence the success and cost of real-world projects. In the real world ''Money Allocated Is Money Spent'' (MAIMS principle); cost underruns are rarely available to protect against cost overruns while task overruns are passed on to the total project cost. Realistic cost estimates therefore require a modified probabilistic cost analysis that simultaneously models the cost management strategy including budget allocation. Psychological influences such as overconfidence in assessing uncertainties and dependencies among cost elements and risks are other important considerations that are generally not addressed. It should then be no surprise that actual project costs often exceed the initial estimates and are delivered late and/or with a reduced scope. This paper presents a practical probabilistic cost analysis model that incorporates recent findings in human behavior and judgment under uncertainty, dependencies among cost elements, the MAIMS principle, and project management practices. Uncertain cost elements are elicited from experts using the direct fractile assessment method and fitted with three-parameter Weibull distributions. The full correlation matrix is specified in terms of two parameters that characterize correlations among cost elements in the same and in different subsystems. The analysis is readily implemented using standard Monte Carlo simulation tools such as {at}Risk and Crystal Ball{reg_sign}. The analysis of a representative design and engineering project substantiates that today's typical probabilistic cost analysis is likely to severely underestimate project cost for probability of success values of importance to contractors and procuring activities. The proposed approach provides a framework for developing a viable cost management strategy for allocating baseline budgets and contingencies. Given the scope and magnitude of the cost-overrun problem, the benefits are likely to be significant.

  9. Graph Mining Meets the Semantic Web

    SciTech Connect (OSTI)

    Lee, Sangkeun; Sukumar, Sreenivas R; Lim, Seung-Hwan

    2015-01-01

    The Resource Description Framework (RDF) and SPARQL Protocol and RDF Query Language (SPARQL) were introduced about a decade ago to enable flexible schema-free data interchange on the Semantic Web. Today, data scientists use the framework as a scalable graph representation for integrating, querying, exploring and analyzing data sets hosted at different sources. With increasing adoption, the need for graph mining capabilities for the Semantic Web has emerged. We address that need through implementation of three popular iterative Graph Mining algorithms (Triangle count, Connected component analysis, and PageRank). We implement these algorithms as SPARQL queries, wrapped within Python scripts. We evaluate the performance of our implementation on 6 real world data sets and show graph mining algorithms (that have a linear-algebra formulation) can indeed be unleashed on data represented as RDF graphs using the SPARQL query interface.

  10. Alaska Division of Mining Land and Water | Open Energy Information

    Open Energy Info (EERE)

    Mining Land and Water Jump to: navigation, search Name: Alaska Division of Mining Land and Water Address: 550 W. 7th Ave., Suite 1260 Place: Anchorage, Alaska Zip: 99501-3557 Phone...

  11. Colorado School of Mines | OpenEI Community

    Open Energy Info (EERE)

    of Mines Home CSM's picture Submitted by CSM(5) Member 14 May, 2014 - 21:59 Travis Brown and Kamran Baksh, Final Submission Colorado School of Mines Waunita Hot Springs...

  12. LM Progressing with Uranium Mines Report to Congress | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Progressing with Uranium Mines Report to Congress LM Progressing with Uranium Mines Report to Congress July 12, 2013 - 10:50am Addthis As reported in an earlier Program Update...

  13. Minnesota Mining and Manufacturing Co 3M | Open Energy Information

    Open Energy Info (EERE)

    Mining and Manufacturing Co 3M Jump to: navigation, search Name: Minnesota Mining and Manufacturing Co (3M) Place: Saint Paul, Minnesota Zip: MN 55144-1000 Product: US-based...

  14. DOE - Office of Legacy Management -- Abandoned Uranium Mines

    Office of Legacy Management (LM)

    Uranium Mines Report to Congress The U.S. Department of Energy (DOE) Office of Legacy Management completed a report on defense-related uranium mines in consultation with...

  15. Westinghouse Earns Mine Safety Award for 16th Consecutive Year

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    was recently awarded the "Mine Operator of the Year Award" at the annual New Mexico Mining Association Convention held in Silver City, N.M. WTS, the management and operating...

  16. WIPP’s Mine Rescue Teams Lead Competition

    Broader source: Energy.gov [DOE]

    CARLSBAD, N.M. – The Waste Isolation Pilot Plant’s (WIPP) two mine rescue teams recently led the field of 13 groups competing in the Southwest Regional Mine Rescue Contest.

  17. High pressure water jet mining machine

    DOE Patents [OSTI]

    Barker, Clark R. (Rolla, MO)

    1981-05-05

    A high pressure water jet mining machine for the longwall mining of coal is described. The machine is generally in the shape of a plowshare and is advanced in the direction in which the coal is cut. The machine has mounted thereon a plurality of nozzle modules each containing a high pressure water jet nozzle disposed to oscillate in a particular plane. The nozzle modules are oriented to cut in vertical and horizontal planes on the leading edge of the machine and the coal so cut is cleaved off by the wedge-shaped body.

  18. Coal mine ground control. 3rd ed.

    SciTech Connect (OSTI)

    Peng, S.S.

    2008-09-15

    The third edition not only completely revises and updates the original subject areas, but also is broadened to include a number of new topics such as high horizontal stresses, computer modeling, and highwall stability. The subject areas covered in this book define the current field of coal mine ground control, except for the recently emerging topic of mine seals and some conventional subjects such as coal/rock cutting and impoundment dams. It contains 1,134 references from all published sources, and archived since 1876.

  19. Conversion of Coal Mine Gas to LNG

    Office of Scientific and Technical Information (OSTI)

    Conversion of Coal Mine Gas to LNG Final Technical Report Reporting Period Start Date Reporting Period End Date Report issued October 01, 2000 March 31, 2013 February 5, 2016 Cooperative Agreement No. DE-FC26-00NT40978 Submitted by: Appalachian-Pacific Coal Mine Methane Power Company 5053 Glenbrook Terrace NW Washington, DC 20016-2602 1 DISCLAIMER: "This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor

  20. Methane modeling: predicting the inflow of methane gas into coal mines. Quarterly technical progress report, October 1, 1982-December 31, 1982

    SciTech Connect (OSTI)

    Boyer, C.M. II; Hoysan, P.M.; Pavone, A.M.; Schwerer, F.C.

    1982-01-01

    Maintenance and laboratory calibrations were obtained for automatic recording methanometers for use during in-mine tests. Speecifications and quotations have been obtained for battery operated versions of the automatic recording methanometers for monitoring in the tailgate region of the longwall operation. Due to mine closings, meetings with mine operators to discuss in-mine testing and to observe the mining section to be monitored have been delayed until February 1983. Assuming a resumption of coal production, actual in-mine tests are tentatively scheduled for March, 1983. Development and testing of software modules for a general two-dimensional model has continued with good progress. The major work emphasis is on the efficient computer execution of the numerical algorithms. Preliminary simulation test runs of an isolated, unstimulated well in an isotropic, homogeneous coalbed have been made. Work has been initiated on incorporating an infinite conductivity fracture in the simulation. Graphical representation of the data generated from the two-dimensional model will be produced and verified. A request was initiated for a no-cost, six-minths extension; this request has subsequently been approved. There is no change in the contract objectives or technical approach, and the project is on target with respect to expenditures.

  1. Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Colorado | Department of Energy Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern Colorado Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern Colorado Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern Colorado PDF icon Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern Colorado More Documents & Publications EA-1535: Final Programmatic Environmental Assessment EA-1037: Final Environmental Assessment Final Uranium Leasing

  2. U.S. Mining Industry Energy Bandwidth Study

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contents Executive Summary .................................................................................................................1 1. Introduction..................................................................................................................5 2. Background ..................................................................................................................7 2.1 Mining Industry Energy Sources

  3. Coal recovery from mine wastes of the historic longwall mining district of north-central illinois. Illinois mineral notes

    SciTech Connect (OSTI)

    Khan, L.A.; Berggren, D.J.; Camp, L.R.

    1986-01-01

    Recovery of coal from mine wastes produced by historic longwall mines in northeastern Illinois was studied as part of a project undertaken in 1982 for the Illinois Abandoned Mined Lands Reclamation Council. About 100 of these mines operated in the Wilmington and La Salle Districts of the Illinois Coal Field between about 1870 and 1940; all worked the Colchester (No. 2) Coal Seam, using a manual high-extraction mining method. Large samples of the three major kinds of mine waste - gray mining gob, preparation gob, and preparation slurry - were collected from deposits at nine of the larger mine sites and analyzed to determine their general ranges of sulfur, ash, and heating values. Preparation gob and slurry from six of the sites had significant combustible contents, and were evaluated by a simple procedure in which ash analyses and wet-screening tests were used to determine the washability and yield of combustibles to recovery processes.

  4. SOLUTION MINING IN SALT DOMES OF THE GULF COAST EMBAYMENT

    SciTech Connect (OSTI)

    Griswold, G. B.

    1981-02-01

    Following a description of salt resources in the salt domes of the gulf coast embayment, mining, particularly solution mining, is described. A scenario is constructed which could lead to release of radioactive waste stored in a salt dome via inadvertent solution mining and the consequences of this scenario are analyzed.

  5. Rock mass response to the decline in underground coal mining

    SciTech Connect (OSTI)

    Holub, K.

    2006-01-15

    Geomechanical problems of mining in the Ostrava-Karvina Coal Basin were studied on the basis of longterm experience gained from seismological observations. They could serve as reasonable models of rock-mass response to temporary reduction and gradual decline in mining activities and mine closure.

  6. Incorporating Bioenergy into Sustainable Landscape Designs Workshop Two

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summary Report | Department of Energy Incorporating Bioenergy into Sustainable Landscape Designs Workshop Two Summary Report Incorporating Bioenergy into Sustainable Landscape Designs Workshop Two Summary Report This report is based on the proceedings of the U.S. Department of Energy's Bioenergy Technologies Office's second Incorporating Bioenergy into Sustainable Landscape Designs Workshop, held from June 24-26, 2014, in Argonne, Illinois. PDF icon

  7. DOE Cites Bechtel National Incorporated for Price-Anderson Violations |

    Energy Savers [EERE]

    Department of Energy Incorporated for Price-Anderson Violations DOE Cites Bechtel National Incorporated for Price-Anderson Violations March 16, 2006 - 12:46pm Addthis WASHINGTON, DC - The Department of Energy (DOE) today notified Bechtel National Incorporated (BNI) that it will fine the company $198,000 for violations of the Department's nuclear safety requirements. BNI is the primary design and construction contractor for the Waste Treatment and Immobilization Plant (WTP). The Preliminary

  8. Cincinnati Incorporated - A Success Story in American Manufacturing |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cincinnati Incorporated - A Success Story in American Manufacturing Cincinnati Incorporated - A Success Story in American Manufacturing Cincinnati Incorporated, a fourth-generation-owned company, is one of the largest machine tool manufacturers in the United States, with almost 400 employees at its 500-thousand square foot plant and technical center. It's also the first company in the manufacturing machine tool industry sector to enter the additive manufacturing arena.

  9. National Policy Assurances to be Incorporated as Award Terms | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy National Policy Assurances to be Incorporated as Award Terms National Policy Assurances to be Incorporated as Award Terms The following are the National Policy Assurances which are incorporated by reference as Award Terms at time of Award. The National Policy Assurances which apply to the award are those in effect on the date of award. For example, the August 2008 version applies to all awards from August 2008 through the present. PDF icon National_Policy_Assurances-September_

  10. EIS-0521: Incorporating Gunnison Sage-Grouse Conservation Measures into

    Office of Environmental Management (EM)

    Resource Management Plans; Colorado and Utah | Department of Energy 1: Incorporating Gunnison Sage-Grouse Conservation Measures into Resource Management Plans; Colorado and Utah EIS-0521: Incorporating Gunnison Sage-Grouse Conservation Measures into Resource Management Plans; Colorado and Utah Summary Bureau of Land Management (BLM) is preparing an EIS that will analyze the potential environmental impacts of proposed Resource Management Plan amendments that would incorporate conservation

  11. Table 15. Recoverable Coal Reserves at Producing Mines, Estimated Recoverable Reserves, and Demonstrated Reserve Base by Mining

    Gasoline and Diesel Fuel Update (EIA)

    Recoverable Coal Reserves at Producing Mines, Estimated Recoverable Reserves, and Demonstrated Reserve Base by Mining Method, 2013 (million short tons) U.S. Energy Information Administration | Annual Coal Report 2013 Table 15. Recoverable Coal Reserves at Producing Mines, Estimated Recoverable Reserves, and Demonstrated Reserve Base by Mining Method, 2013 (million short tons) U.S. Energy Information Administration | Annual Coal Report 2013 Underground - Minable Coal Surface - Minable Coal Total

  12. Table 16. Recoverable Coal Reserves and Average Recovery Percentage at Producing Underground Coal Mines by State and Mining Method,

    Gasoline and Diesel Fuel Update (EIA)

    Recoverable Coal Reserves and Average Recovery Percentage at Producing Underground Coal Mines by State and Mining Method, 2013 (million short tons) U.S. Energy Information Administration | Annual Coal Report 2013 Table 16. Recoverable Coal Reserves and Average Recovery Percentage at Producing Underground Coal Mines by State and Mining Method, 2013 (million short tons) U.S. Energy Information Administration | Annual Coal Report 2013 Continuous 1 Conventional and Other 2 Longwall 3 Total

  13. WIPP Hazardous Waste Permit - Incorporated Class 1 Modifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modifications Submitted for Incorporation into the Permit Class 1 Permit Modification - Change in Department of Energy, Carlsbad Field Office Manager, October 12, 2010 Class 1...

  14. Database (Report) of U.S. CHP Installations Incorporating Thermal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Database (Report) of U.S. CHP Installations Incorporating Thermal Energy Storage (TES) andor Turbine Inlet Cooling (TIC), 2004 Database (Report) of U.S. CHP Installations ...

  15. Voluntary Protection Program Onsite Review, Bechtel National Incorporated- October 2008

    Broader source: Energy.gov [DOE]

    Evaluation to determine whether the Bechtel National Incorporated Waste Treatment Plant is continuing to perform at a level deserving DOE-VPP Star recognition.

  16. Pakistan-Technical Assistance to PDMA Punjab in Incorporating...

    Open Energy Info (EERE)

    Climate Compatibility Considerations into Reconstruction and Village Development Planning Jump to: navigation, search Name Technical Assistance to PDMA Punjab in Incorporating...

  17. Motor technology for mining applications advances

    SciTech Connect (OSTI)

    Fiscor, S.

    2009-08-15

    AC motors are steadily replacing DC motors in mining and mineral processing equipment, requiring less maintenance. The permanent magnet rotor, or the synchronous motor, has enabled Blador to introduce a line of cooling tower motors. Synchronous motors are soon likely to take over from the induction motor. 1 photo.

  18. Generating power with drained coal mine methane

    SciTech Connect (OSTI)

    2005-09-01

    The article describes the three technologies most commonly used for generating electricity from coal mine methane: internal combustion engines, gas turbines, and microturbines. The most critical characteristics and features of these technologies, such as efficiency, output and size are highlighted. 5 refs.

  19. Geotechnical considerations in surface mine reclamation

    SciTech Connect (OSTI)

    Kuhn, A.K.

    1999-07-01

    Most attention in surface mine reclamation is given to agronomic soils and revegetation, but reclamation success depends on the geotechnical characteristics of the underlying earth. If the soil and rock that underline the surface are not stable, surface treatments lack the dependable foundation needed for them to succeed. Reclamation practioners need to understand those geotechnical considerations--material properties, structure, and processes--that affect stability. properties of rock and soil are altered by mining, and those altered materials together with water and processing waste form often-complex mixtures of materials that must be stabilized in reclamation. Surface mining alters existing landforms and creates new ones such as pit walls, spoil and waste rock piles, tailings impoundments, and earthfills. those structures need to be constructed or stabilized so that they can endure and support successful reclamation. processes that affect material properties and landforms include mechanical breakage, accelerated weathering, erosion, and mass movements. Mechanical breakage and the resulting accelerated weathering combine to change material properties, usually expressed as degraded strength, that can lead to instability of landforms. Erosion, especially that related to extreme storm events, and mass movements in the form of slop failures are the most problematic processes that must be taken into account in reclaiming mined lands. These geotechnical considerations are essential in successful reclamation, and practioners who overlook them may find their work literally sliding down a slippery slope.

  20. Development of surface mine cost estimating equations

    SciTech Connect (OSTI)

    Not Available

    1980-09-26

    Cost estimating equations were developed to determine capital and operating costs for five surface coal mine models in Central Appalachia, Northern Appalachia, Mid-West, Far-West, and Campbell County, Wyoming. Engineering equations were used to estimate equipment costs for the stripping function and for the coal loading and hauling function for the base case mine and for several mines with different annual production levels and/or different overburden removal requirements. Deferred costs were then determined through application of the base case depreciation schedules, and direct labor costs were easily established once the equipment quantities (and, hence, manpower requirements) were determined. The data points were then fit with appropriate functional forms, and these were then multiplied by appropriate adjustment factors so that the resulting equations yielded the model mine costs for initial and deferred capital and annual operating cost. (The validity of this scaling process is based on the assumption that total initial and deferred capital costs are proportional to the initial and deferred costs for the primary equipment types that were considered and that annual operating cost is proportional to the direct labor costs that were determined based on primary equipment quantities.) Initial capital costs ranged from $3,910,470 in Central Appalachia to $49,296,785; deferred capital costs ranged from $3,220,000 in Central Appalachia to $30,735,000 in Campbell County, Wyoming; and annual operating costs ranged from $2,924,148 in Central Appalachia to $32,708,591 in Campbell County, Wyoming. (DMC)

  1. WIRELESS MINE-WIDE TELECOMMUNICATIONS TECHNOLOGY

    SciTech Connect (OSTI)

    Zvi H. Meiksin

    2004-01-01

    A prototype tracking system was built and tested. Moving vehicles were detected by the tracking system when a vehicle was 20 to 30 feet away from a location sensor. The identity of the vehicle was transmitted to Transtek's in-mine communications system and relayed to a desktop computer.

  2. Preliminary report on LLNL mine seismicity deployment at the Twentymile Coal Mine

    SciTech Connect (OSTI)

    Walter, W.R.; Hunter, S.L.; Glenn, L.A.

    1996-01-01

    This report summarizes the preliminary results of a just completed experiment at the Twentymile Coal Mine, operated by the Cyprus Amax Coal Company near Oak Creek, CO. The purpose of the experiment was to obtain local and regional seismic data from roof caves associated with long-wall mining activities and to use this data to help determine the effectiveness with which these events can be discriminated from underground nuclear explosions under a future Comprehensive Test Ban Treaty.

  3. A study of mining-induced seismicity in Czech mines with longwall coal exploitation

    SciTech Connect (OSTI)

    Holub, K.

    2007-01-15

    A review is performed for the data of local and regional seismographical networks installed in mines of the Ostrava-Karvina Coal Basin (Czech Republic), where underground anthracite mining is carried out and dynamic events occur in the form of rockbursts. The seismological and seismoacoustic observations data obtained in panels that are in limiting state are analyzed. This aggregate information is a basic for determining hazardous zones and assigning rockburst prevention measures.

  4. Expert systems - An overview and a mining example

    SciTech Connect (OSTI)

    Kohler, J.L.; Ramani, R.V.; Bieniawski, Z.T.

    1986-01-01

    The knowledge-based expert systems (KBES) is a potentially powerful technique to the mining engineer in traditional areas of mine design and operations, as well as in the emerging areas of mining automation and robotics. Since KBES is still experimental in many respects, caution must be exercised as this ''high tech'' tool is developed and applied to mining. The objective of this paper is to demystify expert systems by introducing the elements of KBES, discussing the strengths and weaknesses, and identifying some areas of application in mining, based on the authors' experiences.

  5. Reduction of fire hazards on large mining equipment

    SciTech Connect (OSTI)

    Maria I. De Rosa

    2008-09-15

    Although standards and regulations are in place to prevent large mining equipment fires, recent analyses of mine accident data show that mining equipment fires still occur with alarming frequency and grave consequences, particularly at all surface mines and in underground metal/nonmetal mines. Recently technological advances in fire protection, combined with the statistical data on equipment fires, led NIOSH to reinvestigate this and to improve operator safety. NIOSH demonstrated that newly developed technologies, such as dual cab fire inerting systems and engine compartment fire barriers, can greatly enhance operator safety and lessen the damage of property during large mobile equipment fires. 10 refs., 5 figs.

  6. Selective incorporation of 5-hydroxytryptophan into proteins in mammalian cells

    DOE Patents [OSTI]

    Zhang, Zhiwen; Alfonta, Lital; Schultz, Peter G

    2014-02-25

    This invention provides methods and compositions for incorporation of an unnatural amino acid into a peptide using an orthogonal aminoacyl tRNA synthetase/tRNA pair. In particular, an orthogonal pair is provided to incorporate 5-hydroxy-L-tryptophan in a position encoded by an opal mutation.

  7. Incorporation of pollution prevention into the engineering command media

    SciTech Connect (OSTI)

    Harrington, E.; Hammonds, C.

    1997-10-08

    It has long been recognized that incorporation of pollution prevention (P2) into projects during the design phase yields superior results as compared to modification of facilities after construction. Generation of waste during construction can be minimized, products containing recycled materials can be incorporated into the facility, and the processes or systems can be optimized for P2 from the beginning. However, design engineers must have the proper mindset and training in order to achieve this, since standard engineering practice does not necessarily lead to construction of systems that are optimized for P2. It was determined that incorporation of P2 principles and methods into command media that govern the conduct of design and construction was one way of achieving P2 objectives during design. This would incorporate certain P2 elements into criteria and standard designs so that these elements are automatically incorporated into the designs. The Central Engineering Services (CES) Command Media, which provide direction, methodology, and criteria for performance of engineering design and construction, consist of Engineering Procedures, Master Design Criteria, Technical Specifications, and Engineering Standards. Incorporated in these documents are regulatory requirements, national consensus codes and standards, accepted and proven practices and designs, as well as DOE Orders governing design and construction. The documents were reviewed to identify potential areas into which P2 principles, practices, and methodologies could be incorporated.

  8. Site selection report: characterization of subsidence over longwall mining panels

    SciTech Connect (OSTI)

    Not Available

    1981-02-20

    We have completed our evaluation of candidate longwall mines available for study in the Rocky Mountain Coal Province. This report summarizes our views and evaluation of two candidate mines, the Allen Mine in Weston, Colorado, and the Hawk's Nest Mine in Somerset, Colorado. WCC visited the Allen and the Hawk's Nest Mines, and rated them in order of preference for subsidence monitoring according to criteria given in this report. Based on these evaluations and related discussions with the Technical Project Officer, the Hawk's Nest Mine appears to be the preferred mine for subsidence monitoring, because it is the only candidate mine offering two adjacent longwall panels for monitoring wherein a full subsidence profile may be obtained for at least one of the panels. Selection of this mine requires that provisions be made for monitoring 2000 ft of overburden, whereas our proposal addressed a mine with 600 ft of overburden. Changes in instrumentation which may permit the project to remain within the current budget were investigated and are discussed.

  9. Marine clathrate mining and sediment separation

    DOE Patents [OSTI]

    Borns, David J. (Albuquerque, NM); Hinkebein, Thomas E. (Albuquerque, NM); Lynch, Richard W. (Albuquerque, NM); Northrop, David A. (Albuquerque, NM)

    2001-01-01

    A method and apparatus for mining of hydrocarbons from a hydrocarbon-containing clathrate such as is found on the ocean floor. The hydrocarbon containing clathrate is disaggregated from sediment by first disrupting clathrate-containing strata using continuous mining means such as a rotary tilling drum, a fluid injector, or a drill. The clathrate-rich portion of sediment thus disrupted from the sea floor strata are carried through the apparatus to regions of relative lower pressure and/or relative higher temperature where the clathrate further dissociates into component hydrocarbons and water. The hydrocarbon is recovered with the assistance of a gas that is injected and buoys the hydrocarbon containing clathrate helping it to rise to regions of lower pressure and temperature where hydrocarbon is released. The sediment separated from the hydrocarbon returns to the ocean floor.

  10. Automation of the longwall mining system

    SciTech Connect (OSTI)

    Zimmerman, W.; Aster, R.; Harris, J.; High, J.

    1982-11-01

    The longwall automation study presented is the first phase of a study to evaluate mining automation opportunities. The objective was to identify cost-effective, safe, and technologically sound applications of automation technology to understand coal mining. The prime automation candidates resulting from the industry experience and survey were: (1) the shearer operation, (2) shield and conveyor pan-line advance, (3) a management information system to allow improved mine logistics support, and (4) component fault isolation and diagnostics to reduce untimely maintenance delays. A system network analysis indicated that a 40% improvement in productivity was feasible if system delays associated with all of the above four areas were removed. A technology assessment and conceptual system design of each of the four automation candidate areas showed that state-of-the-art digital computer, servomechanism, and actuator technologies could be applied to automate the longwall system. The final cost benefit analysis of all of the automation areas indicated a total net national benefit (profit) of roughly $200 million to the longwall mining industry if all automation candidates were installed. This cost benefit represented an approximate order of magnitude payback on the research and development (R and D) investment. In conclusion, it is recommended that the shearer operation be automated first because it provides a large number of other sensor inputs required for face alignment (i.e., shields and conveyor). Automation of the shield and conveyor pan-line advance is suggested as the next step since both the shearer and face alignment operations contributed the greatest time delays to the overall system downtime.

  11. Cutting sound enhancement system for mining machines

    DOE Patents [OSTI]

    Leigh, Michael C. (Coal Center, PA); Kwitowski, August J. (Clairton, PA)

    1992-01-01

    A cutting sound enhancement system (10) for transmitting an audible signal from the cutting head (101) of a piece of mine machinery (100) to an operator at a remote station (200), wherein, the operator using a headphone unit (14) can monitor the difference in sounds being made solely by the cutting head (101) to determine the location of the roof, floor, and walls of a coal seam (50).

  12. Mining landforms - A renewable energy development opportunity

    SciTech Connect (OSTI)

    Lombardi, J.A.

    1995-12-01

    A {open_quotes}landforming{close_quotes} land development opportunity unique to metals mining is described. {open_quotes}Landforming{close_quotes}, wherein the earth`s surface is reconfigured with mining waste rock and tails for the capture of renewable energy, is proposed by the United States Bureau of Mines (USBM) to be ecologically acceptable and, in selected cases, economically superior to conventional mineral extraction, reclamation, and minesite abandonment practices. Landforming is primary land construction that uses mining waste and applies the principles of land overlay architecture. Landforms can be layered, shaped, and configured through the use of binders and plastic sheeting to the engineering specifications necessary for the support of physical structures and passage or retention of fluids. Landforms that are terraced and south facing (in the Northern Hemisphere) are an ideal mount for sun-tracking mirror (heliostat) arrays. In {open_quotes}blue sky{close_quotes}. solar-rich environments, the mirrors can be targeted on a common area to form a {open_quotes}solar furnace.{close_quotes} The heat generated at the focal point of the solar array can be used to flash generate steam and run a turbine electric generator. The solar steam power generation cycle coproducers distilled water that can be sprayed onto the surfaces of the landform to create {open_quotes}greenscape.{close_quotes} Waters not consumed or evaporated in the site greening process percolate into and are stored by the landform if it is underlain with plastic. The landform serves, in effect as a shallow aquifer. The terrace-landform development of mineral properties in remote, infrastructurally destitute areas creates renewable energy, sustainable, electric power-water {open_quotes}oases.{close_quotes} The landform development of mineral properties adjacent to metropolitan areas creates utilities expansions and recreational {open_quotes}greenspace{close_quotes} in areas of growing urban need.

  13. NEVADA BUREAU OF MINES AND GEOLOGY

    National Nuclear Security Administration (NNSA)

    " ,,"'1' NEVADA BUREAU OF MINES AND GEOLOGY BULLETIN 104 OIL AND GAS DEVELOPMENTS IN NEVADA LARRY J. GARSIDE, RONALD H. HESS, KERYL L. FLEMING, AND BECKY S. WEIMER I 1988 .,", " "- "" ~-". - CONTENTS INTRODUCTION 3 LYON COUNTY 41 Sources of infonnation 3 Well data 42 Regulation 3 Organization of bulletin and NYE COUNTY 42 explanation of tenns 3 Railroad Valley field summaries 44 Acknowledgments 5 Well data 47 HISTORICAL SUMMARY 5 PERSHING COUNTY 79 Well

  14. Innovative secondary support technologies for western mines

    SciTech Connect (OSTI)

    Barczak, T.M.; Molinda, G.M.

    1996-12-01

    With the development of the shield support, the primary requirement for successful ground control in longwall mining is to provide stable gate road and bleeder entries. Wood cribbing has been the dominant form of secondary support. However, the cost and limited availability of timber, along with the poor performance of softwood crib supports, has forced western U.S. mines to explore the utilization of other support systems. The recent success of cable bolts has engendered much interest from western operators. Several innovative freestanding support systems have been developed recently including: (1) {open_quotes}The Can{close_quotes} support by Burrell Mining Products International, Inc., (2) Hercules and Link-N-Lock wood cribs and Propsetter by Strata Products (USA) Inc., (3) Variable Yielding Crib and Power Crib supports by Mountainland Support Systems, (4) the Confined Core Crib developed by Southern Utah Fuels Corporation; and (5) the MEGA prop by MBK Hydraulik. This paper assesses design considerations and compares the performance and application of these alternative secondary support systems.

  15. Long term contracts, expansion, innovation and stability: North Dakota's lignite mines thrive

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2009-08-15

    North Dakota's lignite coal industry is mainly located in three countries in the central part of the state. Its large surface lignite mines are tied through long-term (20-40 years) contracts to power plants. The article talks about operations at three of the most productive mines - the Freedom mine, Falkirk mine and Center Mine. 4 figs.

  16. The mine management professions in the twentieth-century Scottish coal mining industry

    SciTech Connect (OSTI)

    Perchard, A.

    2007-07-01

    This book seeks to redress the exclusion of colliery managers and other mining professionals from the history of British, and particularly Scottish, coal industries. This is accomplished by examining these groups within the most crucial period of their ascendancy in the Scottish coal mining industry, 1930-1966. This work seeks to place such persons within their context and to examine their roles, statuses and behaviours through their relationships with employees and the execution of their functions, also examining their terms and conditions of employment, the outlook of their professional associations, and that of their union. Through all this, Dr. Perchard illustrates how this growing consciousness amongst managerial employees in the industry was accompanied by an intense public discussion, within the mining professions, over their future shape, principles and occupational standards.

  17. ENHANCEMENT OF STRUCTURAL FOAM MATERIALS BY INCORPORATION OF GASIFIER SLAG

    SciTech Connect (OSTI)

    Olin Perry Norton; Ronald A. Palmer; W. Gene Ramsey

    2006-03-15

    As advanced gasification technology is increasingly adopted as an energy source, disposal of the resulting slag will become a problem. We have shown that gasifier slag can be incorporated into foamed glass, which is currently being manufactured as an abrasive and as an insulating material. The slag we add to foamed glass does not simply act as filler, but improves the mechanical properties of the product. Incorporation of gasifier slag can make foamed glass stronger and more abrasion resistant.

  18. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3, 3/11/13) Construction Subcontract Appendix SFA-1 Page 1 of 8 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: http://www.acquisition.gov/far/ or

  19. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 7/14/14) Appendix SFA-1 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at the following website addresses: * FAR: http://farsite.hill.af.mil/vffara.htm and * DEAR:

  20. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 7/14/14) Appendix SFA-1 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at the following website addresses: * FAR: http://farsite.hill.af.mil/vffara.htm and * DEAR:

  1. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 7/14/14) Appendix SFA-1 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at the following website addresses: * FAR: http://farsite.hill.af.mil/vffara.htm and * DEAR:

  2. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 7/14/14) Appendix SFA-1 Page 1 of 5 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website addresses: FAR: http://farsite.hill.af.mil/vffara.htm DEAR:

  3. Center for Next Generation of Materials by Design: Incorporating

    Office of Science (SC) Website

    Metastability (CNGMD) | U.S. DOE Office of Science (SC) Center for Next Generation of Materials by Design: Incorporating Metastability (CNGMD) Energy Frontier Research Centers (EFRCs) EFRCs Home Centers EFRC External Websites Research Science Highlights News & Events Publications History Contact BES Home Centers Center for Next Generation of Materials by Design: Incorporating Metastability (CNGMD) Print Text Size: A A A FeedbackShare Page CNGMD Header Director William Tumas Lead

  4. NOx Abatement Research and Development CRADA with Navistar Incorporated |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Abatement Research and Development CRADA with Navistar Incorporated NOx Abatement Research and Development CRADA with Navistar Incorporated 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. PDF icon ace_33_toops.pdf More Documents & Publications CLEERS Coordination & Joint Development of Benchmark Kinetics for LNT & SCR CLEERS Coordination & Joint Development of

  5. Manufacturing Plants Incorporate Energy Efficiency into Business Model |

    Office of Environmental Management (EM)

    Department of Energy Plants Incorporate Energy Efficiency into Business Model Manufacturing Plants Incorporate Energy Efficiency into Business Model April 27, 2011 - 12:15pm Addthis Participants of the Superior Energy Performance certification program | Photo Courtesy of Texas Industries of the Future/Dave Bray Participants of the Superior Energy Performance certification program | Photo Courtesy of Texas Industries of the Future/Dave Bray Lowell Sachs Lead Technology Partnership Specialist,

  6. Performance requirements and case histories for a specialized industrial gear lubricant for use in underground coal mining

    SciTech Connect (OSTI)

    Hart, M.D.

    1993-12-31

    The recent release of a new gear lubricant specification by an original equipment manufacturer from the mining industry is an indication that the need for a new specification is recognized in other segments of the mining industry. unfortunately, this new specification appears too ambitious in at least one of it`s performance requirements and not ambitious enough in some of it`s other requirements. This new specification requires that the lubricant be able to emulsify 50% (by volume) water for at least 24 hours. It is technically difficult to achieve this goal and at the same time retain some of the other properties that are essential to the success of a specialized lubricant for underground mining applications. The ability to maintain excellent anti-wear and extreme pressure performance even when water and solid contamination is present is one such property. This effort to incorporate contamination tolerance into a gear lubricant specification should be applauded but it also needs to be recognized that any new gear lubricant specification that attempts to do so should be based on and evolved from existing specialized gear lubricants. A review of the data presented leads to the conclusion that there needs to be a better benchmark available to insure that the enclosed gear lubricants used in underground mining will provide the best service possible. It is more than a matter of upgrading the US Steel 224 lubricant specification. A new enclosed gear lubricant benchmark specification which deals with the important contamination issues that are found in the mining environment is needed.

  7. Instrumentation plan for characterization of subsidence over longwall mining panels at Allen Mine, Weston, Colorado

    SciTech Connect (OSTI)

    O'Rourke, J.

    1980-01-01

    The program includes surface, subsurface, and mine-level instrumentation to monitor subsidence characteristics over two adjacent longwall mining panels, situated in mountainous topography in southern Colorado. An installation plan has been detailed to show numbers and arrangements of instruments in and over the panels, and includes pertinent installation details. The appendix contains technical descriptions of standard features of some of the instrument systems, though in certain cases standard instruments will be modified by Woodward-Clyde Consultants (WCC) or the manufacturer to suit site specific installation requirements detailed on attached drawings. Technical discussions on the application of the instrument arrangements and data monitored to subsidence modeling are given in the report.

  8. Effective Conveyor Belt Inspection for Improved Mining Productivity

    SciTech Connect (OSTI)

    David LaRose

    2006-07-01

    This document details progress on the project ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2005 to May 14, 2006. Highlights include significant improvements in the accuracy and reliability of computer-vision based vulcanized splice detection, deployment of the vulcanized splice detection algorithms for daily use in two working mines, and successful demonstration of an early prototype of a Smart-Camera based system for on-site mechanical splice detection in coal mine installations.

  9. Enterprise Assessments Review of Mine Safety, Stabilization, and

    Energy Savers [EERE]

    Habitability at the Waste Isolation Pilot Plant - October 2015 | Department of Energy Mine Safety, Stabilization, and Habitability at the Waste Isolation Pilot Plant - October 2015 Enterprise Assessments Review of Mine Safety, Stabilization, and Habitability at the Waste Isolation Pilot Plant - October 2015 October 2015 Review of Mine Safety, Stabilization, and Habitability at the Waste Isolation Pilot Plant The U.S. Department of Energy Office of Enterprise Assessments (EA) conducted an

  10. CMI Education Partner: Colorado School of Mines | Critical Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute Education Partner: Colorado School of Mines Colorado School of Mines offers courses in several areas: Geology Engineering/Geochemistry Mining Engineering Metallurgical Engineering/Materials Science Chemistry Engineering Mineral Economics and Business Geology Engineering/Geochemistry GEGN101. EARTH AND ENVIRONMENTAL SYSTEMS. 4.0 Hours. (I, II, S) Fundamental concepts concerning the nature, composition and evolution of the lithosphere, hydrosphere, atmosphere and biosphere of the

  11. Human Resources at Colorado School of Mines | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Colorado School of Mines Employment at Colorado School of Mines Office of Human Resources: 1500 Illinois St., Suite 110 Golden, CO 80401 (303) 273-3250 (303) 384-2025 FAX Mike Dougherty mdougher@imines.edu Associate Vice President and Director (303)273-3554 Veronica Graves vgraves@mines.edu Assistant Director (303)-273-3056 Link to Office of Human Resources Link to Job Openings

  12. Defense-Related Uranium Mines Report to Congress (August 2014) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Defense-Related Uranium Mines Report to Congress (August 2014) Defense-Related Uranium Mines Report to Congress (August 2014) Section 3151 of the National Defense Authorization Act for Fiscal Year 2013 directed the Secretary of Energy, in consultation with the Secretary of the Interior and the Administrator of the U.S. Environmental Protection Agency (EPA), to undertake a review of, and prepare a report on, abandoned uranium mines in the United States that provided

  13. Determining the research needs of the surface coal mining industry

    SciTech Connect (OSTI)

    Zell, L.M.

    1982-12-01

    This paper reveals avenues open to the coal industry to help gain technology and research information needed to meet the requirements of the Surface Mining Control and Reclamation Act of 1977. It discusses projects of the Department of Energy's (DOE) Office of Coal Mining and the Mining and Reclamation Council of America (MARC) to help meet the environmental needs as well as the coal industry needs.

  14. Application of the directional hydraulic fracturing at Berezovskaya Mine

    SciTech Connect (OSTI)

    Lekontsev, Y.M.; Sazhin, P.V.

    2008-05-15

    The paper analyzes the experimental research of the directional hydraulic fracturing applied for weakening of rocks at Berezovskaya Mine (Kuznetsk Coal Basin) in 2005-2006.

  15. Complementary influence functions for predicting subsidence caused by mining

    SciTech Connect (OSTI)

    Sutherland, H.J.; Munson, D.E.

    1982-01-01

    Surface subsidence caused by underground mining is described through complementary influence functions. The complementary functions developed here differ from the simple functions previously used in that the surface displacement is the result of the combined contributions of the mined and unmined zones. This eliminates computational difficulties experienced with the simple functions in determining the deflections above the rib side and in the eventual application of influence functions to complex room-and-pillar configurations. Although the analysis framework presented is intended for predicting subsidence over complex mine configurations, use of the complementary functions is illustrated adequately by application to a longwall panel of the Old Ben No. 24 coal mine.

  16. Alternative Fuels - A New Field For Mine Surveying | Open Energy...

    Open Energy Info (EERE)

    more importance. As far as Germany is concerned, geothermal energy and coal bedmine methane are considered as mineral resources according to the German mining law. This demands...

  17. Mining and Minerals Policy Act of 1970 | Open Energy Information

    Open Energy Info (EERE)

    Act, this statute encompasses both hard rock mining and oil and gas and established modern federal policy regarding mineral resources in the United States. The Act articulates a...

  18. WIPP Mine Rescue Team Sweeps Southeast Missouri Competition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in a mine maintained by the University of Missouri at Rolla. Individually, WIPP's Joe Baca won the bench competition, with teammate Richard West placing third. The benchman...

  19. General Mining Act of 1872 | Open Energy Information

    Open Energy Info (EERE)

    1872 Year 1890 Url Generalmininglaw1872.jpg Description The seminal law regarding mineral management on federal lands in the United States. References General Mining Act of 18721...

  20. Development Wells At Salt Wells Area (Nevada Bureau of Mines...

    Open Energy Info (EERE)

    (Nevada Bureau of Mines and Geology, 2009) Exploration Activity Details Location Salt Wells Geothermal Area Exploration Technique Development Drilling Activity Date 2005 - 2005...

  1. Vendors boot up a new generation of mining software

    SciTech Connect (OSTI)

    Carter, R.A.

    2008-10-15

    From complete mine management down to the smallest detail of process or machine design, the latest programs are claimed to process and display data easier, faster, and more accurately. MINExpo 2008 held in Las Vegas in September offered a bonanza of information on complete mine management to specilaized financial modules. Gemcom Software introduced new versions of five of its key products - Surpac 6.1, GEMS 6.2, Minex 5.3, MinerSched 6.0 and Whittle 4.2. Lerca Geosystems launched its Jigsaw 360 mine management suite, encompassing GPS navigation. Products launched by Modular Mining systems, Carlson Software, DEM Solutions and Logimine are also mentioned. 2 figs.

  2. Famur delivers longwall system to Russian coal mine

    SciTech Connect (OSTI)

    2008-08-15

    The first complete Polish longwall system that was recently delivered to Russia for mining coal seams with a thickness exceeding 5 m is described. 2 photos.

  3. Abandoned Uranium Mine Technical Services and Cleanup Industry...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Abandoned Uranium Mine Technical Services and Cleanup Industry Day In January 2015, the United States (U.S.) and the Anadarko Litigation Trust ("Litigation Trust") entered into a...

  4. CMI at Mines Hosts 160 Sixth Graders | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Colorado Fuel Cell Center, the Advanced Water Technology Center (AQWATEC), and the Geology Museum. Colorado School of Mines Economics and Business Professor Jim Horan is...

  5. Westinghouse Earns 15th Consecutive Mine Safety Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for profit. This award recognizes Westinghouse's close attention to safety in a mining environment. WTS is the management and operating contractor for the DOE at the Waste...

  6. Westinghouse TRU Solutions LLC Earns Corporate Award for Mining...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Earns Corporate Award for Mining Operations CARLSBAD, N.M., May 3, 2001 - Washington Group International has selected Westinghouse TRU Solutions LLC (WTS) for a 2000 Eagle Award....

  7. Abandoned Uranium Mines Report to Congress: LM Wants Your Input

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Office of Legacy Management (LM) is seeking stakeholder input on an abandoned uranium mines report to Congress.

  8. Ex Parte Communications with Caterpillar Global Mining LLC |...

    Energy Savers [EERE]

    would affect above ground mobile mining equipment that would have distribution transformers onboard. PDF icon Ex Parte Communications with Mark Medenwaldt.pdf More Documents &...

  9. Nippon Mining Holdings Inc aka Shinnikko | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Nippon Mining Holdings Inc (aka Shinnikko) Place: Tokyo, Japan Zip: 105-0001 Product: Japanese holding company engaged in oil, metals, and...

  10. WIPP Employee Inducted Into Mine Rescue Hall of Fame - WIPP Teams...

    Broader source: Energy.gov (indexed) [DOE]

    award from Neal Merrifield, administrator for the Mine Safety and Health Administration MetalNon-Metal mines, after Kessler was inducted into the National Mine Rescue Hall of Fame...

  11. Improving mine safety technology and training in the U.S. recommendations of the Mine Safety Technology and Training Commission

    SciTech Connect (OSTI)

    Grayson, R. Larry

    2008-09-15

    The key issues studied focused on underground coal mining and included (1) prevention of explosions in sealed areas, (2) better emergency preparedness and response, (3) improvement of miners' ability to escape, (4) better protection of miners before and after a fire or explosion, (5) improved provision of oxygen, and (6) development and implementation of more robust post-incident communication. The U.S. Congress passed the Mine Improvement and New Emergency Response Act of 2006, which mandated new laws to address the issues. Concurrent with investigations and congressional deliberations, the National Mining Association formed the independent Mine Safety Technology and Training Commission to study the state-of-the-art relative to technology and training that could address the vulnerabilities exposed by the mine disasters. As discussed, the report outlined persistent vulnerabilities linked with significant hazards in underground coal mines, and made recommendations to provide a path for addressing them. Overall the commission report made 75 recommendations in the areas of risk-based design and management, communications technology, emergency response and mine rescue procedures, training for preparedness, and escape and protection strategies. In its deliberations, the commission importantly noted that mine safety in the U.S. needs to follow a new paradigm for ensuring mine safety and developing a culture of prevention that supports safe production at the business core. In the commission's viewpoint, the bottom line in protecting coal miners is not only adopting a culture of prevention but also systematically pursuing mitigation of significant risks. 4 refs., 2 figs.

  12. Gauging apparatus and method, particularly for controlling mining by a mining machine

    SciTech Connect (OSTI)

    Campbell, J.A.; Moynihan, D.J.

    1980-04-29

    Apparatus for and method are claimed for controlling the mining by a mining machine of a seam of material (e.g., coal) overlying or underlying a stratum of undesired material (e.g., clay) to reduce the quantity of undesired material mined with the desired material, the machine comprising a cutter movable up and down and adapted to cut down into a seam of coal on being lowered. The control apparatus comprises a first electrical signal constituting a slow-down signal adapted to be automatically operated to signal when the cutter has cut down into a seam of desired material generally to a predetermined depth short of the interface between the seam and the underlying stratum for slowing down the cutting rate as the cutter approaches the interface, and a second electrical signal adapted to be automatically operated subsequent to the first signal for signalling when the cutter has cut down through the seam to the interface for stopping the cutting operation, thereby to avoid mining undesired material with the desired material. Similar signalling may be provided on an upward cut to avoid cutting into the overlying stratum.

  13. Patent data mining method and apparatus

    DOE Patents [OSTI]

    Boyack, Kevin W. (Albuquerque, NM); Grafe, V. Gerald (Corrales, NM); Johnson, David K. (Albuquerque, NM); Wylie, Brian N. (Albuquerque, NM)

    2002-01-01

    A method of data mining represents related patents in a multidimensional space. Distance between patents in the multidimensional space corresponds to the extent of relationship between the patents. The relationship between pairings of patents can be expressed based on weighted combinations of several predicates. The user can select portions of the space to perceive. The user also can interact with and control the communication of the space, focusing attention on aspects of the space of most interest. The multidimensional spatial representation allows more ready comprehension of the structure of the relationships among the patents.

  14. Options for developing countries in mining development

    SciTech Connect (OSTI)

    Walrond, G.W.; Kumar, R.

    1985-01-01

    This book is a study of the issues that developing countries face in planning and implementing mineral development, taking as case studies Botswana, Sierra Leone, Zambia, Tanzania, Malaysia, Papua New Guinea and the developed states of Quebec and Western Australia. The authors consider the major aspects of the matter including organization and administration; regulation; taxation and surplus distribution; the dynamics of such instruments as royalty, rent resource tax and capital allowances under various cost/price scenarios; and selected mining agreements and their key provisions. They stress throughout the need for foreign investment while maximizing the economic benefits reaped from exhaustible resources.

  15. Acid mine water aeration and treatment system

    DOE Patents [OSTI]

    Ackman, Terry E.; Place, John M.

    1987-01-01

    An in-line system is provided for treating acid mine drainage which basically comprises the combination of a jet pump (or pumps) and a static mixer. The jet pump entrains air into the acid waste water using a Venturi effect so as to provide aeration of the waste water while further aeration is provided by the helical vanes of the static mixer. A neutralizing agent is injected into the suction chamber of the jet pump and the static mixer is formed by plural sections offset by 90 degrees.

  16. Uranium Mining, Conversion, and Enrichment Industries

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis of Potential Impacts of Uranium Transfers on the Domestic Uranium Mining, Conversion, and Enrichment Industries May 1, 2015 ii EXECUTIVE SUMMARY: The Department of Energy ("Department" or "DOE") plans to transfer the equivalent of up to 2,100 metric tons ("MTU") of natural uranium per year (with a higher total for calendar year 2015, mainly because of transfers already executed or under way before today's determination). These transfers would include 1,600

  17. MSHA (Mine Safety and Health Administration) approved mine rescue - training module (coal): fires, fire fighting, and explosions. Mine rescue team series

    SciTech Connect (OSTI)

    Not Available

    1984-01-01

    Mine rescue teams frequently must fight fires and guard against the propagation of fires or explosions during a rescue and recovery operation. The team's ability to fight fires depends a great deal on hands-on experience with different fire fighting agents and equipment. The team's work includes an assessment of fire conditions, mine fire gases and other potential hazards associated with fire fighting activity. This training module covers the underlying principles of the fire triangle and the different methods for controlling, containing and extinguishing fires in a mine. The manual also covers fire-fighting equipment, considerations involved in a sealing operation and the cause-effect of explosions.

  18. Mining industry and US government cooperative research: Lessons learned and benefits to mining industry

    SciTech Connect (OSTI)

    Pearson, D.C.; Stump, B.W.; Phillips, W.S.; Martin, R.; Anderson, D.P.

    1997-09-01

    Since 1994, various mines in the US have cooperated with research scientists at the Los Alamos and Lawrence Livermore National Laboratories to address issues related to verification of the Comprehensive Test Ban Treaty (CTBT). The CTBT requires that no country may conduct any nuclear explosion in the future. While the CTBT is a significant step toward reducing the global nuclear danger, verifying compliance with the treat requires that the monitoring system be able to detect, locate and identify much larger numbers of smaller amplitude seismic events than had been required previously. Large mining blasts conducted world-wide will be of sufficient amplitude to trigger the monitoring system at the lower threshold. It is therefore imperative that research into the range various blasting practices employed, the relationship of yield to seismic magnitude, and identification of anomalous blasting results be performed. This paper will describe a suite of experiments funded by the Department of Energy and conducted by the Los Alamos and Lawrence Livermore National Laboratories in cooperation with the US mining industry. Observations of cast blasting, underground long wall generated coal bumps, stoping, and explosively induced collapse of room and pillar panels will be presented. Results of these dual use experiments which are of interest to the mining community will be discussed. These include (1) variation of amplitude of seismic energy at various azimuths from cast blasts, (2) identification of the extent of back failure following explosive removal of pillars, and (3) the use of single fired shots for calibration of the monitoring system. The wealth of information and discovery described in this paper is a direct result of mutual cooperation between the US Government and the US Mining Industry.

  19. Temporal Shifts in the Geochemistry and Microbial Community Structure of an Ultradeep Mine Borehole Following Isolation

    SciTech Connect (OSTI)

    Moser, Duane P. ); Onstott, T C.; Fredrickson, Jim K. ); Brockman, Fred J. ); Balkwill, David L.; Drake, G R.; Pfiffner, S; White, D C.; Takai, K Project Japan); Pratt, L M.; Fong, J; Lollar, B S.; Slater, G; Phelps, T J. ); Spoelstra, N ); Deflaun, M; Southam, G; Welty, A T.; Baker, B J.; Hoek, J

    2003-12-01

    A borehole draining a water-bearing dyke fracture at 3.2 km depth in a South African Au mine was isolated from the open mine environment...

  20. Microsoft Word - DOE-ID-12-009 Colorado School of Mines.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    09 SECTION A. Project Title: Upgrades to the Colorado School of Mines Neutron Imaging Beam-Line SECTION B. Project Description The Colorado School Mines project has three...

  1. Incorporation of metal nanoparticles into wood substrate and methods

    DOE Patents [OSTI]

    Rector, Kirk D; Lucas, Marcel

    2015-11-04

    Metal nanoparticles were incorporated into wood. Ionic liquids were used to expand the wood cell wall structure for nanoparticle incorporation into the cell wall structure. Nanoparticles of elemental gold or silver were found to be effective surface enhanced Raman spectroscopy (SERS) imaging contrast or sensing agents. Nanoparticles of elemental iron were found to be efficient microwave absorbers and caused localized heating for disrupting the integrity of the lignocellulosic matrix. Controls suggest that the localized heating around the iron nanoparticles reduces losses of cellulose in the form of water, volatiles and CO.sub.2. The ionic liquid is needed during the incorporation process at room temperature. The use of small amounts of ionic liquid combined with the absence of an ionic liquid purification step and a lower energy and water use are expected to reduce costs in an up-scaled pretreatment process.

  2. Dust control technology in longwall coal mining. Progress report No. 37, August 1-31, 1984

    SciTech Connect (OSTI)

    Ruggieri, S.K.

    1984-09-20

    Consistent data-recording intervals offer much greater insight into the mechanics of shield dust than the traditional one-reading-per-movement approach. Based on the upstream-downstream comparisons, it would appear that a significant amount of shield-generated dust does occur, and that a large fraction of the upstream content may in fact be from residual shield dust filtering through the canopy gaps. It appears that the vast majority of respirable dust in the walkway occurs during the set cycle. A large amount of visually impressive nuisance debris is dropped during the drop and advance, however, this does not appear to be as dangerous as the set cycle. Not enough consistent data were collected to ascertain any positive, quantifiable cause and effect relationship between dust and debris accumulation, amounts lost, canopy, and checkplate gaps. The graphical plots, however, are extremely suggestive and the next field visits should incorporate a more intensive examination of these parameters. It may also be instructive to follow the mining sequence throughout a mining day, such that shift to shift variations would be minimized and determinable. The canopy gap water sprays could not be tested due to operational constraint.

  3. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    .1, 6/17/13) Appendix SFA-1 Page 1 of 6 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: http://www.acquisition.gov/far/ or http://www.management.energy.gov/DEAR.htm (c) The

  4. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2, 3/11/13) Appendix SFA-1 Page 1 of 9 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: http://www.acquisition.gov/far/ or http://www.management.energy.gov/DEAR.htm (c) The

  5. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SFA (Rev. 2, 3/11/13) Appendix SFA-1 Page 1 of 8 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: http://www.acquisition.gov/far/ or http://www.management.energy.gov/DEAR.htm

  6. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1, 3/11/13) Appendix SFA-1 Page 1 of 3 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: http://www.acquisition.gov/far/ or http://www.management.energy.gov/DEAR.htm (c) The

  7. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2, 3/11/13) Appendix SFA-1 Page 1 of 8 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: http://www.acquisition.gov/far/ or http://www.management.energy.gov/DEAR.htm (c) The

  8. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 3/11/13) Page 1 of 6 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: http://www.acquisition.gov/far/ or http://www.management.energy.gov/DEAR.htm (c) The following

  9. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 3/11/13) Appendix SFA-1 Page 1 of 6 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: http://www.acquisition.gov/far/ or http://www.management.energy.gov/DEAR.htm (c) The

  10. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 7/14/14) Appendix SFA-1 Page 1 of 7 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: FAR: http://farsite.hill.af.mil/vffara.htm DEAR: http://farsite.hill.af.mil/vfdoea.htm

  11. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 7/14/14) Appendix SFA-1 Page 1 of 8 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: FAR: http://farsite.hill.af.mil/vffara.htm DEAR: http://farsite.hill.af.mil/vfdoea.htm

  12. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2, 7/14/14) Appendix SFA-1 Page 1 of 3 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: FAR: http://farsite.hill.af.mil/vffara.htm DEAR: http://farsite.hill.af.mil/vfdoea.htm

  13. Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , 7/14/14) Appendix SFA-1 Page 1 of 8 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: FAR: http://farsite.hill.af.mil/vffara.htm DEAR: http://farsite.hill.af.mil/vfdoea.htm

  14. SkyMine Carbon Mineralization Pilot Project

    SciTech Connect (OSTI)

    Christenson, Norm; Walters, Jerel

    2014-12-31

    This Topical Report addresses accomplishments achieved during Phase 2b of the SkyMine® Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO2 from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO2 to products having commercial value (i.e., beneficial use), show the economic viability of the CO2 capture and conversion process, and thereby advance the technology to the point of readiness for commercial scale demonstration and deployment. The overall process is carbon negative, resulting in mineralization of CO2 that would otherwise be released into the atmosphere. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at the commercial scale. The project is being conducted in two phases. The primary objectives of Phase 1 were to evaluate proven SkyMine® process chemistry for commercial pilot-scale operation and complete the preliminary design for the pilot plant to be built and operated in Phase 2, complete a NEPA evaluation, and develop a comprehensive carbon life cycle analysis. The objective of Phase 2b was to build the pilot plant to be operated and tested in Phase 2c.

  15. Bioreactor for acid mine drainage control

    DOE Patents [OSTI]

    Zaluski, Marek H. (Butte, MT); Manchester, Kenneth R. (Butte, MT)

    2001-01-01

    A bioreactor for reacting an aqueous heavy metal and sulfate containing mine drainage solution with sulfate reducing bacteria to produce heavy metal sulfides and reduce the sulfuric acid content of the solution. The reactor is an elongated, horizontal trough defining an inlet section and a reaction section. An inlet manifold adjacent the inlet section distributes aqueous mine drainage solution into the inlet section for flow through the inlet section and reaction section. A sulfate reducing bacteria and bacteria nutrient composition in the inlet section provides sulfate reducing bacteria that with the sulfuric acid and heavy metals in the solution to form solid metal sulfides. The sulfate reducing bacteria and bacteria nutrient composition is retained in the cells of a honeycomb structure formed of cellular honeycomb panels mounted in the reactor inlet section. The honeycomb panels extend upwardly in the inlet section at an acute angle with respect to the horizontal. The cells defined in each panel are thereby offset with respect to the honeycomb cells in each adjacent panel in order to define a tortuous path for the flow of the aqueous solution.

  16. Mining Bug Databases for Unidentified Software Vulnerabilities

    SciTech Connect (OSTI)

    Dumidu Wijayasekara; Milos Manic; Jason Wright; Miles McQueen

    2012-06-01

    Identifying software vulnerabilities is becoming more important as critical and sensitive systems increasingly rely on complex software systems. It has been suggested in previous work that some bugs are only identified as vulnerabilities long after the bug has been made public. These vulnerabilities are known as hidden impact vulnerabilities. This paper discusses the feasibility and necessity to mine common publicly available bug databases for vulnerabilities that are yet to be identified. We present bug database analysis of two well known and frequently used software packages, namely Linux kernel and MySQL. It is shown that for both Linux and MySQL, a significant portion of vulnerabilities that were discovered for the time period from January 2006 to April 2011 were hidden impact vulnerabilities. It is also shown that the percentage of hidden impact vulnerabilities has increased in the last two years, for both software packages. We then propose an improved hidden impact vulnerability identification methodology based on text mining bug databases, and conclude by discussing a few potential problems faced by such a classifier.

  17. SkyMine Carbon Mineralization Pilot Project

    SciTech Connect (OSTI)

    Joe Jones; Clive Barton; Mark Clayton; Al Yablonsky; David Legere

    2010-09-30

    This Topical Report addresses accomplishments achieved during Phase 1 of the SkyMine{reg_sign} Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO{sub 2} from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO{sub 2} to products having commercial value (i.e., beneficial use), show the economic viability of the CO{sub 2} capture and conversion process, and thereby advance the technology to a point of readiness for commercial scale demonstration and proliferation. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at commercial scale. The primary objectives of Phase 1 of the project were to elaborate proven SkyMine{reg_sign} process chemistry to commercial pilot-scale operation and complete the preliminary design ('Reference Plant Design') for the pilot plant to be built and operated in Phase 2. Additionally, during Phase 1, information necessary to inform a DOE determination regarding NEPA requirements for the project was developed, and a comprehensive carbon lifecycle analysis was completed. These items were included in the formal application for funding under Phase 2. All Phase 1 objectives were successfully met on schedule and within budget.

  18. Electric shovels meet the demands for mining operations

    SciTech Connect (OSTI)

    Fiscor, S.

    2008-03-15

    Rugged, intelligent shovels offer better productivity and help mine operators avoid costly downtime in a very tight market. In 2007 P & H Mining Equipment began to produce a new breed of electric mining shovels designed to help reduce operating cost in coal and other mining operations. These were designated the P & H C-Series. All have an advanced communication, command and control system called the Centurion system. Coal mining applications for this series include 4100XPCs in Australia, China and Wyoming, USA. The Centurion system provides information on shovel performance and systems health which is communicated via graphic user interface terminals to the operators cab. Bucyrus International is developing a hydraulic crowd mechanism for its electric shovels and is now field testing one for its 495 series shovel. The company has also added greater capability in the primary software in the drive system for troubleshooting and fault identification to quickly diagnose problems onboard or remotely. 4 photos.

  19. Concept for the Intermountain Center for Mining Research and Development

    SciTech Connect (OSTI)

    Not Available

    2005-06-01

    The Intermountain Center for Mining Research and Development (ICMRD) was established with the Idaho National Laboratory (INL) as the cornerstone, and with regional universities, mining schools, and the Western mining industry as full members. In aggregate, the members provide the strong mining research and development capabilities and knowledge that are essential to the success of such a research center. The ICMRD is an organization that identifies technical needs, partially funds, and provides project management for research projects. The ICMRD will primarily serve the nine Intermountain States, but will not restrict other regions, research organizations, or academic institutions from membership. The ICMRD's nine primary states are: Idaho, Montana, Wyoming, Utah, Colorado, Nevada, Arizona, Alaska, and New Mexico. The business and project management functions of the ICMRD will be located at INL. Research projects may be performed by INL, one of the member research organizations, academic institutions, mining companies/suppliers, or preferably, by a partnership of several of these institutions. Teaming among members will be essential in providing quality R&D. The ICMRD will accomplish its research goals by creating partnerships between the research organizations, federal and state agencies, and the mining industry. The ICMRD will provide project management, technical and financial support, and technology transfer opportunities. The ICMRD, through its associated academic partners, will provide a base for development and testing of mining, metallurgical, and environmental technologies in the laboratory through pilot-scale environments. Through these partnerships, the ICMRD will provide a vehicle to achieve its objectives of developing innovative mining technologies, enhancing the capabilities of the regional mining schools and universities, and improving the global competitiveness of the U.S. mining industry.

  20. High conductivity electrolyte solutions and rechargeable cells incorporating such solutions

    DOE Patents [OSTI]

    Angell, Charles Austen (Mesa, AZ); Zhang, Sheng-Shui (Tucson, AZ); Xu, Kang (Tempe, AZ)

    1998-01-01

    This invention relates generally to electrolyte solvents for use in liquid or rubbery polymer electrolyte solutions as are used, for example, in electrochemical devices. More specifically, this invention relates to sulfonyl/phospho-compound electrolyte solvents and sulfonyl/phospho-compound electrolyte solutions incorporating such solvents.

  1. Site specific incorporation of keto amino acids into proteins

    DOE Patents [OSTI]

    Schultz, Peter G. (La Jolla, CA); Wang, Lei (San Diego, CA)

    2012-02-14

    Compositions and methods of producing components of protein biosynthetic machinery that include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, and orthogonal pairs of tRNAs/synthetases, which incorporate keto amino acids into proteins are provided. Methods for identifying these orthogonal pairs are also provided along with methods of producing proteins with keto amino acids using these orthogonal pairs.

  2. Site specific incorporation of keto amino acids into proteins

    DOE Patents [OSTI]

    Schultz, Peter G. (La Jolla, CA); Wang, Lei (San Diego, CA)

    2011-03-22

    Compositions and methods of producing components of protein biosynthetic machinery that include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, and orthogonal pairs of tRNAs/synthetases, which incorporate keto amino acids into proteins are provided. Methods for identifying these orthogonal pairs are also provided along with methods of producing proteins with keto amino acids using these orthogonal pairs.

  3. Site specific incorporation of keto amino acids into proteins

    DOE Patents [OSTI]

    Schultz, Peter G. (La Jolla, CA); Wang, Lei (San Diego, CA)

    2011-12-06

    Compositions and methods of producing components of protein biosynthetic machinery that include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, and orthogonal pairs of tRNAs/synthetases, which incorporate keto amino acids into proteins are provided. Methods for identifying these orthogonal pairs are also provided along with methods of producing proteins with keto amino acids using these orthogonal pairs.

  4. High conductivity electrolyte solutions and rechargeable cells incorporating such solutions

    DOE Patents [OSTI]

    Angell, C.A.; Zhang, S.S.; Xu, K.

    1998-10-20

    This invention relates generally to electrolyte solvents for use in liquid or rubbery polymer electrolyte solutions as are used, for example, in electrochemical devices. More specifically, this invention relates to sulfonyl/phospho-compound electrolyte solvents and sulfonyl/phospho-compound electrolyte solutions incorporating such solvents. 9 figs.

  5. Site specific incorporation of keto amino acids into proteins

    DOE Patents [OSTI]

    Schultz, Peter G. (La Jolla, CA); Wang, Lei (San Diego, CA)

    2008-10-07

    Compositions and methods of producing components of protein biosynthetic machinery that include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, and orthogonal pairs of tRNAs/synthetases, which incorporate keto amino acids into proteins are provided. Methods for identifying these orthogonal pairs are also provided along with methods of producing proteins with keto amino acids using these orthogonal pairs.

  6. Site specific incorporation of keto amino acids into proteins

    DOE Patents [OSTI]

    Schultz, Peter G. (La Jolla, CA); Wang, Lei (San Diego, CA)

    2009-04-28

    Compositions and methods of producing components of protein biosynthetic machinery that include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, and orthogonal pairs of tRNAs/synthetases, which incorporate keto amino acids into proteins are provided. Methods for identifying these orthogonal pairs are also provided along with methods of producing proteins with keto amino acids using these orthogonal pairs.

  7. Method for incorporating radioactive phosphoric acid solutions in concrete

    DOE Patents [OSTI]

    Wolf, Gary A [Kennewick, WA; Smith, Jeffrey W [Lancaster, OH; Ihle, Nathan C [Walla Walla, WA

    1984-01-01

    A method for incorporating radioactive phosphoric acid solutions in concrete is described wherein the phosphoric acid is reacted with Ca(OH).sub.2 to form a precipitate of hydroxyapatite and the hydroxyapatite is mixed with portland cement to form concrete.

  8. Method for incorporating radioactive phosphoric acid solutions in concrete

    DOE Patents [OSTI]

    Wolf, G.A.; Smith, J.W.; Ihle, N.C.

    1982-07-08

    A method for incorporating radioactive phosphoric acid solutions in concrete is described wherein the phosphoric acid is reacted with Ca(OH)/sub 2/ to form a precipitate of hydroxyapatite and the hydroxyapatite is mixed with Portland cement to form concrete.

  9. Preliminary Notice of Violation, EG&G Incorporated - EA-97-10...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EG&G Incorporated - EA-97-10 Preliminary Notice of Violation, EG&G Incorporated - EA-97-10 October 21, 1997 Issued to EG&G Incorporated, related to Bioassay and Internal Dosimetry...

  10. Stability analysis of a backfilled room-and-pillar mine

    SciTech Connect (OSTI)

    Tesarik, D.R.; Seymour, J.B.; Yanske, T.R.; McKibbin, R.W.

    1995-12-31

    Displacement and stress changes in cemented backfill and ore pillars at the Buick Mine, near Boss, MO, were monitored by engineers from the US Bureau of Mines and The Doe Run Co., St. Louis, MO. A test area in this room-and-pillar mine was backfilled to provide support when remnant ore pillars were mined. Objectives of this research were to evaluate the effect of backfill on mine stability, observe backfill conditions during pillar removal, and calibrate a numerical model to be used to design other areas of the mine. Relative vertical displacements in the backfill were measured with embedment strain gauges and vertical extensometers. Other types of instruments used were earth pressure cells (to identify loading trends in the backfill), borehole extensometers (to measure relative displacement changes in the mine roof and support pillars), and biaxial stressmeters (to measure stress changes in several support pillars and abutments). Two- and three-dimensional numeric codes were used to model the study area. With information from these codes and the installed instruments, two failed pillars were identified and rock mass properties were estimated.

  11. Illinois abandoned mined lands reclamation program: a progress report

    SciTech Connect (OSTI)

    Hickmann, T.J.; Jenkusky, S.M.; Massie, S.

    1985-12-01

    The Illinois Abandoned Mined Lands Reclamation Council (AMLRC), created in 1975, is responsible for the abatement of hazardous and environmental problems associated with pre-law abandoned coal mines throughout the State. The availability of federal funds for reclamation, through passage of the Surface Mining Control and Reclamation Act of 1977 (SMCRA), greatly expanded the program. With funds provided through early cooperative agreements and current annual grants from the federal Office of Surface Mining (OSM), the State has reclaimed, or is currently reclaiming, 182 mine sites and has assisted OSM in the abatement of 67 emergency situations. This paper reviews the progress made by the AMLRC in dealing with the State's abandoned mine problems. Specifically, the numbers and types of problem sites reclaimed annually, their costs, and reclamation methods are identified. Progress of the program relative to the entire State's abandoned mine problems is reviewed. The effects of other reclamation factors, such as natural revegetation, remaining privately-funded reclamation, and secondary carbon recovery, on the overall scope of the State's program are also examined. General comments are made concerning grant preparation, State-OSM cooperation and AML-Inventory control. Selected reclamation projects and techniques are also discussed. 11 references, 3 tables.

  12. Surface and groundwater management in surface mined-land reclamation

    SciTech Connect (OSTI)

    Evoy, B.; Holland, M.

    1990-06-01

    This report provides information on surface water and groundwater management for use in the mined-land reclamation planning process in California. Mined-land reclamation, as defined by the California Surface Mining and Reclamation Act, is the combination of land treatments which prevent or minimize water degradation, air pollution, damage to aquatic or wildlife habitat, and erosion resulting from a surface mining operation. Surface water and groundwater management play an integral role in nearly every reclamation plan. Groundwater and surface water runoff (both onto and off of the site) must often be evaluated (1) to design flooding and erosion protection measures such as drainage channels, levees, culverts, or riprap; (2) to prepare and carry out a successful revegetation program; (3) to design stable final slopes; (4) to maximize potential available water for the operation and reclamation stages; (5) to prevent the discharge of contaminants from mine processes or from mined areas; and (6) to limit long-term leachate formation and movement from tailings, pit, or waste rock disposal areas. This report is a guide for mine operators, local government, planners, and plan reviewers.

  13. Aquatic Ecosystem Enhancement at Mountaintop Mining Sites Symposium

    SciTech Connect (OSTI)

    Black, D. Courtney; Lawson, Peter; Morgan, John; Maggard, Randy; Schor, Horst; Powell, Rocky; Kirk, Ed. J.

    2000-01-12

    Welcome to this symposium which is part of the ongoing effort to prepare an Environmental Impact Statement (EIS) regarding mountaintop mining and valley fills. The EIS is being prepared by the U.S. Environmental Protection Agency, U.S. Army Corps of Engineers, U.S. Office of Surface Mining, and U.S. Fish and Wildlife Service, in cooperation with the State of West Virginia. Aquatic Ecosystem Enhancement (AEE) at mountaintop mining sites is one of fourteen technical areas identified for study by the EIS Interagency Steering Committee. Three goals were identified in the AEE Work Plan: 1. Assess mining and reclamation practices to show how mining operations might be carried out in a way that minimizes adverse impacts to streams and other environmental resources and to local communities. Clarify economic and technical constraints and benefits. 2. Help citizens clarify choices by showing whether there are affordable ways to enhance existing mining, reclamation, mitigation processes and/or procedures. 3. Ide identify data needed to improve environmental evaluation and design of mining projects to protect the environment. Todays symposium was proposed in the AEE Team Work Plans but coordinated planning for the event began September 15, 1999 when representatives from coal industry, environmental groups and government regulators met in Morgantown. The meeting participants worked with a facilitator from the Canaan Valley Institute to outline plans for the symposium. Several teams were formed to carry out the plans we outlined in the meeting.

  14. A waterjet mining machine for use in room and pillar mining operations

    SciTech Connect (OSTI)

    Summers, D.A.

    1990-06-01

    A new mining machine is constructed for use in room and pillar mining operations. This machine uses the action of computer controlled, centrally located high pressure cutting lances to cut deep slots in a coal face. These slots stress relieve the coal ahead of the machine and outline blocks of coal. The movement forward of the machine then wedges up the lower block of coal. This wedging action is assisted by the gathering arms of the loader section of the machine, and by underlying oscillating waterjets which create a slot ahead of the loading wedge as it advances. Finally the top section of coal is brought down by the sequential advance of wedge faced roof support members, again assisted by the waterjet action from the central cutting arms. The machine is designed to overcome major disadvantages of existing room and pillar mining machines in regard to a reduction in respirable dust, the creation of an immediate roof support, and an increase in product size, with concomitant reduction in cleaning costs.

  15. Mining Machine Control Signal Processing System

    SciTech Connect (OSTI)

    Fecitt, G.J.

    1984-01-31

    A signal processing system for an underground mining machine having a steerable mineral cutter and a sensor which senses natural radiation emitted from rock strata overlaying the radiation absorbing mineral and which derives a sensor signal representative of the cutting horizon of the cutter, comprises processing means for receiving and processing the sensor signal to derive an operational signal indicative of the cutter horizon of the cutter, calibration means for accepting a fed in calibration signal representative of a known existing condition of the cutting horizon and comparator means for comparing the derived operational signal with the calibration signal to determine an error in the derived operational signal and for instructing the processing means to apply a suitable correction to the derived operational signal.

  16. Parallel object-oriented data mining system

    DOE Patents [OSTI]

    Kamath, Chandrika; Cantu-Paz, Erick

    2004-01-06

    A data mining system uncovers patterns, associations, anomalies and other statistically significant structures in data. Data files are read and displayed. Objects in the data files are identified. Relevant features for the objects are extracted. Patterns among the objects are recognized based upon the features. Data from the Faint Images of the Radio Sky at Twenty Centimeters (FIRST) sky survey was used to search for bent doubles. This test was conducted on data from the Very Large Array in New Mexico which seeks to locate a special type of quasar (radio-emitting stellar object) called bent doubles. The FIRST survey has generated more than 32,000 images of the sky to date. Each image is 7.1 megabytes, yielding more than 100 gigabytes of image data in the entire data set.

  17. GASFLOW comparisons with bureau of mines experiments

    SciTech Connect (OSTI)

    Mueller, C.; Travis, J.R.

    1994-09-01

    At the request of the Department of Energy and Westinghouse Hanford Company, the Bureau of Mines has investigated the flammability of mixtures of hydrogen, ammonia, nitrous oxide, and air. The tests were performed in a spherical chamber under quiescent and turbulent conditions. This paper describes combustion calculations using the GASFLOW code and compares the calculated pressure ratios with experiments mentioned above. GASFLOW is a finite-volume computer code that solves the transient, three-dimensional, compressible fluid, Navier-Stokes equations with multiple species coupled with finite-rate chemical kinetics. The computational results show good agreement with the experimental data and confirm GASFLOW to be a valuable tool for evaluating the above combustion process.

  18. Capture and Use of Coal Mine Ventilation Air Methane

    SciTech Connect (OSTI)

    Deborah Kosmack

    2008-10-31

    CONSOL Energy Inc., in conjunction with MEGTEC Systems, Inc., and the U.S. Department of Energy with the U.S. Environmental Protection Agency, designed, built, and operated a commercial-size thermal flow reversal reactor (TFRR) to evaluate its suitability to oxidize coal mine ventilation air methane (VAM). Coal mining, and particularly coal mine ventilation air, is a major source of anthropogenic methane emissions, a greenhouse gas. Ventilation air volumes are large and the concentration of methane in the ventilation air is low; thus making it difficult to use or abate these emissions. This test program was conducted with simulated coal mine VAM in advance of deploying the technology on active coal mine ventilation fans. The demonstration project team installed and operated a 30,000 cfm MEGTEC VOCSIDIZER oxidation system on an inactive coal mine in West Liberty, WV. The performance of the unit was monitored and evaluated during months of unmanned operation at mostly constant conditions. The operating and maintenance history and how it impacts the implementation of the technology on mine fans were investigated. Emission tests showed very low levels of all criteria pollutants at the stack. Parametric studies showed that the equipment can successfully operate at the design specification limits. The results verified the ability of the TFRR to oxidize {ge}95% of the low and variable concentration of methane in the ventilation air. This technology provides new opportunities to reduce greenhouse gas emissions by the reduction of methane emissions from coal mine ventilation air. A large commercial-size installation (180,000 cfm) on a single typical mine ventilation bleeder fan would reduce methane emissions by 11,000 to 22,100 short tons per year (the equivalent of 183,000 to 366,000 metric tonnes carbon dioxide).

  19. Restoration of abandoned mine lands through cooperative coal resource evaluations

    SciTech Connect (OSTI)

    Hoskins, D.M.; Smith, M.

    1996-12-31

    The public reclamation cost of reclaiming all of Pennsylvania`s abandoned mine lands is estimated at $15 billion. Drainage from abandoned mines poses another $5 billion water pollution clean-up problem. Although it is unlikely that public reclamation alone could ever tackle these problems, much can be done to alleviate the nuisances through the remining of previously mined areas to recover remaining reserves, restore the land and improve water quality in the same process. Remining of priority areas is encouraged through a new Pennsylvania policy which provides incentives to mining companies. One incentive, initiated under Pennsylvania`s comprehensive mine reclamation strategy, is to identify and geologically map reminable coal resources in selected watersheds, and then to expedite mine permitting in these watersheds. At present, two such priority watersheds, Little Toby Creek in Elk County and Tangascootak Creek in Clinton County, are the focus of geologic map compilation based on recent quadrangle mapping, or new, directed, geologic mapping, including new research core drilling to establish the geologic stratigraphic framework. In order to maximize environmental benefits the comprehensive mine reclamation strategy identifies watersheds which are affected by acid mine drainage (AMD), but that are reasonably capable of restoration, if sufficient coal reserves remain. Pennsylvania`s geochemical quality database of rock overburden, in combination with detailed coal resource mapping by the Pennsylvania Geological Survey, and the cooperation of coal companies and leaseholders, is being used by the Department of Environmental Protection (DEP) to identify and design remining projects which will not only allow the recovery of coal resources, but will also improve the water quality through a variety of innovative mining techniques.

  20. 87th regular meeting of the Rocky Mountain Coal Mining Institute: Proceedings

    SciTech Connect (OSTI)

    Finnie, D.G.

    1991-01-01

    Eleven papers are included in these proceedings. Topics include management of coal mining operations, improving mine health and safety, new technologies for longwall mining, coal haulage, coal drying, a demonstration of the LFC process, and state of the art in mining automation. All eleven papers have been processed for inclusion on the data base.

  1. Mine seismicity and the Comprehensive Nuclear Test Ban Treaty

    SciTech Connect (OSTI)

    Chiappetta, F.; Heuze, F.; Walter, W.; Hopler, R.; Hsu, V.; Martin, B.; Pearson, C.; Stump, B.; Zipf, K.

    1998-12-09

    Surface and underground mining operations generate seismic ground motions which are created by chemical explosions and ground failures. It may come as a surprise to some that the ground failures (coal bumps, first caves, pillar collapses, rockbursts, etc.) can send signals whose magnitudes are as strong or stronger than those from any mining blast. A verification system that includes seismic, infrasound, hydroacoustic and radionuclide sensors is being completed as part of the CTBT. The largest mine blasts and ground failures will be detected by this system and must be identified as distinct from signals generated by small nuclear explosions. Seismologists will analyze the seismic records and presumably should be able to separate them into earthquake-like and non earthquake-like categories, using a variety of so-called seismic discriminants. Non-earthquake essentially means explosion- or implosion-like. Such signals can be generated not only by mine blasts but also by a variety of ground failures. Because it is known that single-fired chemical explosions and nuclear explosion signals of the same yield give very similar seismic records, the non-earthquake signals will be of concern to the Treaty verification community. The magnitude of the mine-related events is in the range of seismicity created by smaller nuclear explosions or decoupled tests, which are of particular concern under the Treaty. It is conceivable that legitimate mining blasts or some mine-induced ground failures could occasionally be questioned. Information such as shot time, location and design parameters may be all that is necessary to resolve the event identity. In rare instances where the legitimate origin of the event could not be resolved by a consultation and clarification procedure, it might trigger on On-Site Inspection (OSI). Because there is uncertainty in the precise location of seismic event as determined by the International Monitoring System (IMS), the OSI can cover an area of up to 1,000 squared kilometers. In active mining districts this area could include several different mining operations. So, an OSI could be disruptive both to the mining community and to the US Government which must host the foreign inspection team. Accordingly, it is in the best interest of all US parties to try and eliminate the possible occurrence of false alarms. This can be achieved primarily by reducing the ambiguity of mine-induced seismic signals, so that even if these remain visible to the IMS they are clearly consistent with recognizable mining patterns.

  2. Water spray ventilator system for continuous mining machines

    DOE Patents [OSTI]

    Page, Steven J. (Pittsburgh, PA); Mal, Thomas (Pittsburgh, PA)

    1995-01-01

    The invention relates to a water spray ventilator system mounted on a continuous mining machine to streamline airflow and provide effective face ventilation of both respirable dust and methane in underground coal mines. This system has two side spray nozzles mounted one on each side of the mining machine and six spray nozzles disposed on a manifold mounted to the underside of the machine boom. The six spray nozzles are angularly and laterally oriented on the manifold so as to provide non-overlapping spray patterns along the length of the cutter drum.

  3. Active mines in Arizona and Arizona exploration offices

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This book is a directory that lists 91 mining operations and 107 sand and gravel operations. It lists the company name, address, key personnel, mine, mill, or smelter location, and a description of the operation. A map plotting the locations of all the active mines is also available ($2). Arizona Exploration Offices is a directory that lists 68 exploration companies in Arizona, 80% of whom list gold or silver as their principal exploration target. Other exploration companies are searching for industrial minerals, uranium, beryllium, rare earths, ferroalloys, and sulfur.

  4. Microsoft Word - Mine Rescue Team Wins Best Overall at Competition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - More - For Immediate Release WIPP Mine Rescue Team Wins Best Overall at Competition CARLSBAD, N.M., June 1, 2009 - Members of the U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) Blue Mine Rescue Team recently brought home top honors from the Southern Regional Mine Rescue Competition. The event, held in New Iberia, La., boasted 12 teams from Missouri, Texas, Wyoming, Nevada, New Mexico and Louisiana. The WIPP team won Best Overall Team, by scoring first-place victories in

  5. Self advancing mine roof supports (Patent) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Self advancing mine roof supports Citation Details In-Document Search Title: Self advancing mine roof supports A self-advancing mine-roof-support for use in or aligned with a main roadway or gate has a floor-engaging part and a roof engaging part spaced apart by extensible load-bearing prop or jack means, and engagement means for a face-conveyor and a transversely acting transfer conveyor whereby their relative positions are constrained to facilitate discharge of mineral from one conveyor to the

  6. 14. International conference on ground control in mining: Proceedings

    SciTech Connect (OSTI)

    Peng, S.S.

    1995-11-01

    This volume contains the 38 papers presented at the conference. Papers have been divided into the following sections: Innovative longwall tailgate support; Effects of high horizontal stresses; Pillar recovery; Pillar design; Prop support; Roof and rib bolting; Floor stability; Surface subsidence; Longwall operations; Longwall entry stability; and Multiple seam mine design. Except for two papers, one on iron ore mining and the second on the Waste Isolation Pilot Plant, all papers deal with underground coal mining. Thirty-seven papers have been processed separately for inclusion on the data base.

  7. Environmental regulation of coal mining, SMCRA`s second decade

    SciTech Connect (OSTI)

    McElfish, J.M.; Beier, A.E.

    1990-12-31

    This controversial book examines environmental regulation of coal mining in the United States over the 1979-1989 period. The Surface Mining Control and Reclamation Act of 1977 (SMCRA) established federal regulation of the environmental effects of coal mining. The permanent regulatory program implementing SMCRA was initiated in 1979. This book looks at the first ten years of SMCRA, seeking to draw lessons from experience that will improve regulation, so that the objectives of the law may be achieved in SMCRA`s second decade.

  8. Acid mine drainage: Common law, SMCRA, and the Clean Water Act

    SciTech Connect (OSTI)

    Henrich, C.

    1995-12-31

    Acid mine drainage is a major problem related to coal mining which, if unabated, can severely damage the aquatic environment. Damage resulting from acid mine drainage was first addressed by common law and riparian principles. As societal laws changed, common law principles alone could not effectively control this problem. Preventing and controlling pollution including acid mine drainage are important goals of the Surface Mining Control Reclamation Act (SMCRA) and the Clean Water Act (CWA). This article examines how common law, SMCRA, and the CWA address the acid mine drainage issue independently, and how improvements in the control of acid mine drainage can be achieved.

  9. INTERIM REPORT IMPROVED METHODS FOR INCORPORATING RISK IN DECISION MAKING

    SciTech Connect (OSTI)

    Clausen, M. J.; Fraley, D. W.; Denning, R. S.

    1980-08-01

    This paper reports observations and preliminary investigations in the first phase of a research program covering methodologies for making safety-related decisions. The objective has been to gain insight into NRC perceptions of the value of formal decision methods, their possible applications, and how risk is, or may be, incorporated in decision making. The perception of formal decision making techniques, held by various decision makers, and what may be done to improve them, were explored through interviews with NRC staff. An initial survey of decision making methods, an assessment of the applicability of formal methods vis-a-vis the available information, and a review of methods of incorporating risk and uncertainty have also been conducted.

  10. Flow cytomeric measurement of DNA and incorporated nucleoside analogs

    DOE Patents [OSTI]

    Dolbeare, Frank A. (Livermore, CA); Gray, Joe W. (Livermore, CA)

    1989-01-01

    A method is provided for simultaneously measuring total cellular DNA and incorporated nucleoside analog. The method entails altering the cellular DNA of cells grown in the presence of a nucleoside analog so that single stranded and double stranded portions are present. Separate stains are used against the two portions. An immunochemical stain is used against the single stranded portion to provide a measure of incorporated nucleoside analog, and a double strand DNA-specific stain is used against the double stranded portion to simultaneously provide a measure of total cellular DNA. The method permits rapid flow cytometric analysis of cell populations, rapid identification of cycling and noncycling subpopulations, and determination of the efficacy of S phase cytotoxic anticancer agents.

  11. Incorporating Bioenergy in Sustainable Landscape Designs Workshop Two: Agricultural Landscapes

    SciTech Connect (OSTI)

    Negri, M. Cristina; Ssegane, H.

    2015-08-01

    The Bioenergy Technologies Office hosted two workshops on Incorporating Bioenergy in Sustainable Landscape Designs with Oak Ridge and Argonne National Laboratories in 2014. The second workshop focused on agricultural landscapes and took place in Argonne, IL from June 24—26, 2014. The workshop brought together experts to discuss how landscape design can contribute to the deployment and assessment of sustainable bioenergy. This report summarizes the discussions that occurred at this particular workshop.

  12. Passive Tamper Indicating Enclosures Incorporating Embedded Optical Fibre

    SciTech Connect (OSTI)

    Wynn, Paul; White, Helen; Allen, Keir; Simmons, Kevin L.; Sliva, Paul; Benz, Jacob M.; Tanner, Jennifer E.

    2011-08-14

    AWE and PNNL are engaged in a technical collaboration investigating techniques to enhance continuity of knowledge over Accountable Items within a verified nuclear weapons dismantlement process. Tamper Indicating Enclosures (TIE) will likely be deployed as part of a chain of custody regime to indicate an unauthorised attempt to access an Accountable Item. This paper looks at the use of passive TIEs incorporating embedded optical fibre; concepts relating to deployment, tamper indication and unique identification will be discussed.

  13. DOE Cites Bechtel National Incorporated for Price-Anderson Violations |

    Energy Savers [EERE]

    Department of Energy October 4, 2007 - 3:14pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today notified Bechtel National Incorporated (BNI) that it will fine the company $165,000 for violations of the Department's nuclear safety requirements. BNI is the primary design and construction contractor for the Waste Treatment and Immobilization Plant (WTP) located at the Hanford Site in Richland, Washington. The Preliminary Notice of Violation (PNOV) issued today cited a series of

  14. Mapping Metals Incorporation of a Single Catalyst Particle Using Element

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Specific X-ray Nanotomography | Stanford Synchrotron Radiation Lightsource Mapping Metals Incorporation of a Single Catalyst Particle Using Element Specific X-ray Nanotomography Tuesday, March 31, 2015 Fluid catalytic cracking (FCC) is the refining process for converting large and/or heavy molecules of oil feedstock into smaller and lighter hydrocarbons, such as gasoline. The workhorse of the FCC process is a tiny catalyst particle of 50-150 µm diameter that consists of a complex mixture of

  15. New Mexico Department of Fish and Game Mining Guidelines webpage...

    Open Energy Info (EERE)

    New Mexico Department of Fish and Game Mining Guidelines webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: New Mexico Department of Fish and Game...

  16. Salinity gradient solar pond technology applied to potash solution mining

    SciTech Connect (OSTI)

    Martell, J.A.; Aimone-Martin, C.T.

    2000-06-12

    A solution mining facility at the Eddy Potash Mine, Eddy County, New Mexico has been proposed that will utilize salinity gradient solar pond (SGSP) technology to supply industrial process thermal energy. The process will include underground dissolution of potassium chloride (KCl) from pillars and other reserves remaining after completion of primary room and pillar mining using recirculating solutions heated in the SGSP. Production of KCl will involve cold crystallization followed by a cooling pond stage, with the spent brine being recirculated in a closed loop back to the SGSP for reheating. This research uses SGSP as a renewable, clean energy source to optimize the entire mining process, minimize environmental wastes, provide a safe, more economical extraction process and reduce the need for conventional processing by crushing, grinding and flotation. The applications of SGSP technology will not only save energy in the extraction and beneficiation processes, but also will produce excess energy available for power generation, desalination, and auxiliary structure heating.

  17. Alteration And Geochemical Zoning In Bodie Bluff, Bodie Mining...

    Open Energy Info (EERE)

    Banded, epithermal quartz-adularia veins have produced about 1.5 million ounces of gold and 7 million ounces of silver from the Bodie mining district, eastern California. The...

  18. Abandoned Mine Reclamation Fund - a view from the West

    SciTech Connect (OSTI)

    Collins, J.D.

    1985-01-01

    Congress created the Abandoned Mine Reclamation Fund (AML) in 1977 as part of the Surface Mining Control and Reclamation Act. The AML is funded by a special tax on coal mining. About one-third of AML fees will be paid by coal operators in the western states. The author examines the disbursement of AML funds under the Reagan Administration. He describes how the western state governments expected a generous portion of the AML funds for coal and non-coal reclamation, as well as community impact assistance projects in their states. Finally, the author shows how the Office of Surface Mining has largely frustrated the western expectations through its interpretation of the AML disbursement priorities.

  19. Surface coal mining in Alaska: an investigation of the Surface Mining Control and Reclamation Act of 1977 in relation to Alaskan conditions. Final report

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    This report was written in response to a mandate in section 708 of the Surface Mining Control and Reclamation Act of 1977 which required the study of surface coal mining conditions in the State of Alaska, in order to determine which, if any, of the provisions of the Act should be modified with respect to surface coal mining operations in Alaska. The report discusses both surface mining and the surface effects of underground mining. The report examines not only the impact of mining at the site of operations but also the effects that extend beyond the mine itself, including effects on social institutions, the economy, the physical well-being of people, and the use of land. The report considers Alaska conditions primarily from the perspective of a potential increase in coal development, not of mining limited to meeting local needs of energy.

  20. Effective Conveyer Belt Inspection for Improved Mining Productivity

    SciTech Connect (OSTI)

    David LaRose

    2006-11-14

    This document details progress on the project ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from May 15, 2006 to November 14, 2006. Progress during this period includes significant advances in development of a Smart Camera based prototype system for on-site mechanical splice detection, and continued deployment of both the mechanical splice detection system and the vulcanized splice detection system in area coal mines.

  1. Colorado School of Mines Researchers Win Patent | Critical Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute News News releases CMI in the news News archive CMI social media Colorado School of Mines Researchers Win Patent The Coloroado School of Mines 2013 highlights include news that Prof. Corby Anderson along with co-inventors Dr. Paul Miranda of Thompson Creek minerals and Dr. Ed Rosenberg of University of Montana were granted a US patent for styrene based ion exchange resins with oxine functionalized groups. The original work was focused on separating iron and gallium, but the

  2. In a mining accident, first responders are working against

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a mining accident, first responders are working against the clock and against a myriad of dangers such as debris, poisonous gases, flooding, explosive vapors, and unstable structures to assess the situation and rescue trapped miners. These unknown and potentially deadly conditions create a challenge for first responders and often limit their ability to assess the situation and respond in a timely matter. There is a need for a robotic system that could be used to support a mine rescue team,

  3. Emissions and Durability of Underground Mining Diesel Particulate Filter

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applications | Department of Energy Durability of Underground Mining Diesel Particulate Filter Applications Emissions and Durability of Underground Mining Diesel Particulate Filter Applications Presentation given at DEER 2006, August 20-24, 2006, Detroit, Michigan. Sponsored by the U.S. DOE's EERE FreedomCar and Fuel Partnership and 21st Century Truck Programs. PDF icon 2006_deer_rubeli.pdf More Documents & Publications Testing an Active Diesel Particulate Filter on a 2-Cycle Marine

  4. Mercury Speciation in Piscivorous Fish from Mining-impacted Reservoirs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mercury Speciation in Piscivorous Fish from Mining-impacted Reservoirs Mercury toxicity generates environmental concerns in diverse aquatic systems because methylmercury enters the water column in diverse ways then biomagnifies through food webs. At the apex of many freshwater food webs, piscivorous fish can then extend that trophic transfer and potential for neurotoxicity to wildlife and humans. Mining activities, particularly those associated with the San Francisco Bay region, can generate

  5. Environmental regulation of coal mining. SMCRA`s Second Decade

    SciTech Connect (OSTI)

    McElfish, J.M.; Beier, A.E.

    1990-12-31

    If you find yourself involved in the workings of the Surface Mining Control and Reclamation Act of 1977 (SMCRA), let ELI`s guide take you through SMCRA`s second decade. Environmental Regulation of Coal mining: SMCRA`s Second Decade gives you a clear picture of SMCRA`s statutory and regulatory requirements, and identifies the key policy disputes and problems that will be confronted in the years ahead.

  6. Dr. George Ansell, President Colorado School of Mines Research Institute

    Office of Legacy Management (LM)

    Dr. George Ansell, President Colorado School of Mines Research Institute Golden, Colorado 80403 Dear Dr. Ansell: As you may know, the Department of Energy (DOE) is evaluating the radiological condition of sites that were utilized under the Manhattan Engineer District (MED) and the Atomic Energy Comnission (AEC) during the early years of nuclear development to determine whether they need remedial action. Mr. J. Krause of the Colorado School of Mines Research Institute was notified by letter (Mott

  7. Incorporating Sustainability into Lease and Build Agreements; U.S. Department of Homeland Security (DHS)

    SciTech Connect (OSTI)

    2015-05-26

    This fact sheet discusses the benefits of incorporating sustainability into lease and build agreements.

  8. Reactivation of landslides by surface subsidence from longwall mining

    SciTech Connect (OSTI)

    Iannacchione, A.T.; Ackman, T.E.

    1984-12-01

    Subsidence research by the US Bureau of Mines has identified and documented the occurrence of landslides over a longwall mining area in the Dunkard basin. Mining by longwall methods has been observed or produce a gradual surface subsidence profile of up to 60% of the thickness of the mined coal bed. The gradual subsidence of panels averaging 600 x 5000 ft (180 x 1525 m) can cause reactivation of older landslide deposits by decreasing the support to the landslide toe area. Examination of surficial features over a longwall mining area comprised of nine panels has led to the identification of several reactivated landslides. The two largest landslides occurred above a thin sandstone member with several associated springs. The largest landslides ranged from 100 to 300 ft (30 to 90 m) in length and from 100 to 200 ft (30 to 60 m) in width. Maximum scarp-slope displacements were approximately 7 ft (2 m). Less significant mass wasting was also observed over the longwall panels. Identification of landslides was accomplished through examination of premining aerial photographs and geologic field investigation. Characterization of reactivated zones was achieved through evaluation of current aerial 2-ft (0.6-m) surface contour map and field surveys. Recognition of problem areas will make civic and mining personnel aware of the landslide potential so that damage in such areas can be minimized.

  9. Development of a Mine Rescue Drilling System (MRDS) :

    SciTech Connect (OSTI)

    Raymond, David W.; Gaither, Katherine N.; Polsky, Yarom; Knudsen, Steven D.; Broome, Scott Thomas; Su, Jiann-Cherng; Blankenship, Douglas A.; Costin, Laurence S.

    2014-06-01

    Sandia National Laboratories (Sandia) has a long history in developing compact, mobile, very high-speed drilling systems and this technology could be applied to increasing the rate at which boreholes are drilled during a mine accident response. The present study reviews current technical approaches, primarily based on technology developed under other programs, analyzes mine rescue specific requirements to develop a conceptual mine rescue drilling approach, and finally, proposes development of a phased mine rescue drilling system (MRDS) that accomplishes (1) development of rapid drilling MRDS equipment; (2) structuring improved web communication through the Mine Safety & Health Administration (MSHA) web site; (3) development of an improved protocol for employment of existing drilling technology in emergencies; (4) deployment of advanced technologies to complement mine rescue drilling operations during emergency events; and (5) preliminary discussion of potential future technology development of specialized MRDS equipment. This phased approach allows for rapid fielding of a basic system for improved rescue drilling, with the ability to improve the system over time at a reasonable cost.

  10. Teleoperated control system for underground room and pillar mining

    DOE Patents [OSTI]

    Mayercheck, William D. (New Stanton, PA); Kwitowski, August J. (Clairton, PA); Brautigam, Albert L. (Pittsburgh, PA); Mueller, Brian K. (Pittsburgh, PA)

    1992-01-01

    A teleoperated mining system is provided for remotely controlling the various machines involved with thin seam mining. A thin seam continuous miner located at a mining face includes a camera mounted thereon and a slave computer for controlling the miner and the camera. A plurality of sensors for relaying information about the miner and the face to the slave computer. A slave computer controlled ventilation sub-system which removes combustible material from the mining face. A haulage sub-system removes material mined by the continuous miner from the mining face to a collection site and is also controlled by the slave computer. A base station, which controls the supply of power and water to the continuous miner, haulage system, and ventilation systems, includes cable/hose handling module for winding or unwinding cables/hoses connected to the miner, an operator control module, and a hydraulic power and air compressor module for supplying air to the miner. An operator controlled host computer housed in the operator control module is connected to the slave computer via a two wire communications line.

  11. Effects of surface mining on aquatic resources in North America

    SciTech Connect (OSTI)

    Starnes, L.B.; Gasper, D.C.

    1995-05-01

    Surface mining is highly visible land use because it temporarily eliminates surface vegetation and can permanently change topography as with mountain-top removal and valley fill operations. It also permanently and drastically alters soil and subsurface geologic structure and disrupts surface and subsurface hydrologic regimes. The American Fisheries Society (AFS) encourages energy conservation, use of renewable resources, and recycling to minimize the need for non-renewable minerals and fuels that are obtained through mining processes. When mining occurs, it is AFS policy to encourage legislation and diligent regulation of all surface mining by local, state, province, and federal government to provide adequate protection for aquatic resources. Federal legislation provides uniformity of standards nationwide. While the Surface Mining Control and Reclamation Act has attempted to minimize environmental impacts from coal mining, similar legislation and enforcement should be encourages for other minerals. The Society encourages its members to become involved in this process by providing technical information essential for protection and continued propagation of fishery resources to policy makers so decisions are made on a scientific, rather than emotional or political basis.

  12. Small surface coal mine operators handbook. Final report

    SciTech Connect (OSTI)

    Tourbier, J.T.; Westmacott, R.

    1980-06-01

    The purpose of this handbook is to interpret the Regulations of the Surface Mining Control and Reclamation Act of 1977 (Public Law 95-87) (hereafter referred to as the Act) as they affect the operators of small surface coal mines. Further, the purpose of this handbook is to make it easier for the small operator to compare his operation with the act in order to determine compliance with the regulations. Part 795 of the Regulations deals specifically with the Small Operator Assistance Program. This program relieves the operator of the cost of carrying out certain hydrologic and geologic analyses required by the Regulations. The emphasis of this handbook is on the protection of water resources during mining and reclamation operations. As almost all the operations in surface mining directly or indirectly affect water the authors have included some operations which may only marginally affect water quality or hydrology. Anthracite mining, lignite mining, coal processing, refuse disposal, and slurry disposal are not covered in this handbook.

  13. Hydraulically operated mine prop with safety valve

    SciTech Connect (OSTI)

    Koppers, M.; Marr, P.

    1981-02-24

    A mine prop is disclosed that is provided with an overpressure valve of large flowthrough section which opens when excessive forces suddenly act on the prop to discharge pressure fluid from the interior of the prop. The overpressure valve comprises a hollow cylindrical housing forming at one end a valve seat communicating with the fluid-filled inner space of the prop and a valve member axially guided in the housing for movement between a closed position engaging the valve seat and an open position. The fluid-filled space of the prop communicates with channels leading to the outside of the prop. The valve member is normally maintained in the closed position by a gas pillow under high pretension confined in a pressure space delimited peripherally by the wall of the valve housing and at opposite ends respectively by the valve member and a plug fluid tightly mounted in and closing the other end of the housing. The valve member and the plug are both formed from metal and are both provided at facing ends with annular slender sealing lips of triangular cross-section tapering toward each other, the outer surfaces of which are pressed into engagement with the inner peripheral surface of the housing by the pressure of the gas pillow.

  14. Stable benzimidazole-incorporated porous polymer network for carbon capture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with high efficiency and low cost | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Stable benzimidazole-incorporated porous polymer network for carbon capture with high efficiency and low cost Previous Next List Muwei Zhang, Zachary Perry, Jinhee Park, Hong-Cai Zhou, Polymer 55, 335-339 (2014) DOI: 10.1016/j.polymer.2013.09.029 1-s2.0-S0032386113008951-fx1.jpg Abstract: Porous Polymer Networks (PPNs) are an emerging category of advanced porous materials

  15. The Kelastic variable wall mining machine. Interim final report

    SciTech Connect (OSTI)

    1995-11-12

    This machine cuts coal along a longwall face extending up to 500 feet by a rotating auger with bits. The machine also transports the coal that is cut acting as screw conveyor. By virtue of an integral shroud comprising part of the conveyor the machine is also amenable to a separation of the zones where men work from air being contaminated by dust and methane gas by the cutting action. Beginning as single intake air courses, the air separates at the working section where one split provides fresh air to the Occupied Zone (OZ) for human needs and the other split purges and carries away dust and methane from face fragmentation in the Cutting Zone (CZ). The attractiveness of the Variable Wall Mining Machine is that it addresses the limitations of current longwall mining equipment: it can consistently out-produce continuous mining machines and most longwall shearing machines. It also is amenable to configuring an environment, the dual-duct system, where the air for human breathing is separated from dust-laden ventilating air with methane mixtures. The objective of the research was to perform a mathematical and experimental study of the interrelationships of the components of the system so that a computer model could demonstrate the workings of the system in an animation program. The analysis resulted in the compilation of the parameters for three different configurations of a dual aircourse system of ventilating underground mines. In addressing the goal of an inherently safe mining system the dual-duct adaptation to the Variable Wall Mining Machine appears to offer the path to solution. The respirable dust problem is solvable; the explosive dust problem is nearly solvable; and the explosive methane problem can be greatly reduced. If installed in a highly gassy mine, the dual duct models would also be considerably less costly.

  16. Modeling of Groundwater Flow and Radionuclide Transport at the Climax Mine sub-CAU, Nevada Test Site

    SciTech Connect (OSTI)

    K. Pohlmann; M. Ye; D. Reeves; M. Zavarin; D. Decker; J. Chapman

    2007-09-28

    The Yucca Flat-Climax Mine Corrective Action Unit (CAU) on the Nevada Test Site comprises 747 underground nuclear detonations, all but three of which were conducted in alluvial, volcanic, and carbonate rocks in Yucca Flat. The remaining three tests were conducted in the very different hydrogeologic setting of the Climax Mine granite stock located in Area 15 at the northern end of Yucca Flat. As part of the Corrective Action Investigation (CAI) for the Yucca Flat-Climax Mine CAU, models of groundwater flow and radionuclide transport will be developed for Yucca Flat. However, two aspects of these CAU-scale models require focused modeling at the northern end of Yucca Flat beyond the capability of these large models. First, boundary conditions and boundary flows along the northern reaches of the Yucca Flat-Climax Mine CAU require evaluation to a higher level of detail than the CAU-scale Yucca Flat model can efficiently provide. Second, radionuclide fluxes from the Climax tests require analysis of flow and transport in fractured granite, a unique hydrologic environment as compared to Yucca Flat proper. This report describes the Climax Mine sub-CAU modeling studies conducted to address these issues, with the results providing a direct feed into the CAI for the Yucca Flat-Climax Mine CAU. Three underground nuclear detonations were conducted for weapons effects testing in the Climax stock between 1962 and 1966: Hard Hat, Pile Driver, and Tiny Tot. Though there is uncertainty regarding the position of the water table in the stock, it is likely that all three tests were conducted in the unsaturated zone. In the early 1980s, the Spent Fuel Test-Climax (SFT-C) was constructed to evaluate the feasibility of retrievable, deep geologic storage of commercial nuclear reactor wastes. Detailed mapping of fractures and faults carried out for the SFT-C studies greatly expanded earlier data sets collected in association with the nuclear tests and provided invaluable information for subsequent modeling studies at Climax. The objectives of the Climax Mine sub-CAU work are to (1) provide simulated heads and groundwater flows for the northern boundaries of the Yucca Flat-Climax Mine CAU model, while incorporating alternative conceptualizations of the hydrogeologic system with their associated uncertainty, and (2) provide radionuclide fluxes from the three tests in the Climax stock using modeling techniques that account for groundwater flow in fractured granite. Meeting these two objectives required two different model scales. The northern boundary groundwater fluxes were addressed using the Death Valley Regional Flow System (DVRFS) model (Belcher, 2004) developed by the U.S. Geological Survey as a modeling framework, with refined hydrostratigraphy in a zone north of Yucca Flat and including Climax stock. Radionuclide transport was simulated using a separate model confined to the granite stock itself, but linked to regional groundwater flow through boundary conditions and calibration targets.

  17. Technology experience and economics of oil shale mining in Estonia

    SciTech Connect (OSTI)

    Fraiman, J.; Kuzmiv, I. [Estonian Oil Shale State Co., Jyhvi (Estonia). Scientific Research Center

    1995-11-01

    The exhaustion of fuel-energy resources became an evident problem of the European continent in the 1960s. Careful utilization of their own reserves of coal, oil, and gas (Germany, France, Spain) and assigned shares of imports of these resources make up the strategy of economic development of the European countries. The expansion of oil shale utilization is the most topical problem. The experience of mining oil shale deposits in Estonia and Russia, in terms of the practice and the economic results, is reviewed in this article. The room-and-pillar method of underground mining and the open-cut technology of clearing the ground ensure the fertility of a soil. The economics of underground and open pit oil shale mines is analyzed in terms of natural, organizational, and technical factors. These analyses are used in the planning and management of oil shale mining enterprises. The perspectives of the oil shale mining industry of Estonia and the economic expediency of multiproduction are examined. Recommendations and guidelines for future industrial utilization of oil shale are given in the summary.

  18. Flow cytometric measurement of total DNA and incorporated halodeoxyuridine

    DOE Patents [OSTI]

    Dolbeare, F.A.; Gray, J.W.

    1983-10-18

    A method for the simultaneous flow cylometric measurement of total cellular DNA content and of the uptake of DNA precursors as a measure of DNA synthesis during various phases of the cell cycle in normal and malignant cells in vitro and in vivo is described. The method comprises reacting cells with labelled halodeoxyuridine (HdU), partially denaturing cellular DNA, adding to the reaction medium monoclonal antibodies (mabs) reactive with HdU, reacting the bound mabs with a second labelled antibody, incubating the mixture with a DNA stain, and measuring simultaneously the intensity of the DNA stain as a measure of the total cellular DNA and the HdU incorporated as a measure of DNA synthesis. (ACR)

  19. Efficient incorporation of silver to improve superconducting fibers

    DOE Patents [OSTI]

    Gleixner, Richard A.; LaCount, Dale F.; Finnemore, Douglas K.

    1994-04-26

    An improved method for the efficient incorporation of a metal such as silver in a superconducting material includes blending the metal with a high temperature superconductor or precursor powder and consolidating the same into pellets. The pellets are charged directly into a heating assembly where it is melted and heated sufficiently to a uniform temperature prior to fiberization. Droplets of the melted blend fall through a collar into a nozzle where they are subjected to a high velocity gas to break the melted material into ligaments which solidify into improved flexible fibers having the metal homogeneously dis This invention was made with Government support under a contract with the Department of Energy (DOE) and Ames Laboratory, Contract No. SC-91-225, our reference No. CRD-1272. The Government has certain rights in this invention.

  20. Coal mining and the resource community cycle: A longitudinal assessment of the social impacts of the Coppabella coal mine

    SciTech Connect (OSTI)

    Lockie, S.; Franettovich, M.; Petkova-Timmer, V.; Rolfe, J.; Ivanova, G.

    2009-09-15

    Two social impact assessment (SIA) studies of Central Queensland's Coppabella coal mine were undertaken in 2002-2003 and 2006-2007. As ex post studies of actual change, these provide a reference point for predictive assessments of proposed resource extraction projects at other sites, while the longitudinal element added by the second study illustrates how impacts associated with one mine may vary over time due to changing economic and social conditions. It was found that the traditional coupling of local economic vitality and community development to the life cycle of resource projects - the resource community cycle - was mediated by labour recruitment and social infrastructure policies that reduced the emphasis on localised employment and investment strategies. and by the cumulative impacts of multiple mining projects within relative proximity to each other. The resource community cycle was accelerated and local communities forced to consider ways of attracting secondary investment and/or alternative industries early in the operational life of the Coppabella mine in order to secure significant economic benefits and to guard against the erosion of social capital and the ability to cope with future downturns in the mining sector.

  1. Potential highwall use by raptors in coal mine reclamation

    SciTech Connect (OSTI)

    Waage, B.

    1990-12-31

    In 1982, Western Energy Company`s Rosebud Mine, located in southeastern Montana, received legal exception, {open_quotes}a first{close_quotes} in Montana to leave a standing mine highwall extending a native bluff. This bluff extension stands 110 feet high and 900 feet long. Normally, all highwalls by law are reduced to a 5:1 slope. This legal exception was accomplished with the support of several governmental agencies and was justified on the highwalls potential value for raptors. Enhancement measures undertaken on the highwall included the construction of three artificial eryies and the release of young prairie falcons (Falco mexicanus) employing hacking methods of the Peregrine Fund. The hack is now in its fourth year with a total of 46 young falcons having been released. Opportunities exist for creating a more diverse habitat for raptors and other cliff obligate species on reclaimed mine lands in the west. It is believed that this practical approach should be explored.

  2. Table 9. Major U.S. Coal Mines, 2013 U.S. Energy Information Administration | Annual Coal Report 2013

    Gasoline and Diesel Fuel Update (EIA)

    Major U.S. Coal Mines, 2013 U.S. Energy Information Administration | Annual Coal Report 2013 Table 9. Major U.S. Coal Mines, 2013 U.S. Energy Information Administration | Annual Coal Report 2013 Rank Mine Name / Operating Company Mine Type State Production (short tons) 1 North Antelope Rochelle Mine / Peabody Powder River Mining Ll Surface Wyoming 111,005,549 2 Black Thunder / Thunder Basin Coal Company LLC Surface Wyoming 100,687,876 3 Cordero Mine / Cordero Mining LLC Surface Wyoming

  3. Performance potential of the coal strip mining in the east of Russia

    SciTech Connect (OSTI)

    Cheskidov, V.I.

    2007-07-15

    The potentialities of the leading mining districts in Russia to improve coal production by strip mining are analyzed. The operational issues of the Erunakovskiy (Kuzbass), Kansko-Achinskiy and South Yakutia territorial production complexes are considered.

  4. APUI Incubateur de l Ecole des Mines de Douai | Open Energy Informatio...

    Open Energy Info (EERE)

    APUI Incubateur de l Ecole des Mines de Douai Jump to: navigation, search Name: APUI Incubateur de l'Ecole des Mines de Douai Place: France Sector: Services Product: General...

  5. NPDES compliance monitoring report: Silver bell mine, Pima County, Arizona. Final report

    SciTech Connect (OSTI)

    Ganter, W.

    1992-10-01

    This presents the findings of a compliance evaluation inspection of the Silver Bell Mine in Pima County, Arizona, conducted on August 19, 1992. It is part of a series of inspections of uncontrolled discharges of mine drainage.

  6. NPDES compliance monitoring report: Oracle Ridge Mine, San Manuel, Arizona. Draft report

    SciTech Connect (OSTI)

    Stevens, J.

    1992-11-03

    This presents the findings of a compliance evaluation inspection of the Oracle Ridge Copper Mine near San Manuel, Arizona, conducted on August 17, 1992. It is part of a series of inspections of uncontrolled discharges of mine drainage.

  7. XsunX Inc formerly Sun River Mining Inc | Open Energy Information

    Open Energy Info (EERE)

    XsunX Inc formerly Sun River Mining Inc Jump to: navigation, search Name: XsunX Inc (formerly Sun River Mining Inc) Place: Aliso Viejo, California Zip: 92656 Product: US-based...

  8. Televised remote control system of a continuous mining machine

    SciTech Connect (OSTI)

    Lansberry, J.B.

    1981-08-04

    A method of recovering particulate material from a seam of such material within the earth bounded above and below by different material which comprises the steps of positioning in mining relation to the seam a continuous mining machine having a power driven mechanism thereon for moving the machine through successive seam material cutting cycles which include an advancing movement along a mined entry within the seam in a direction toward the working face of the seam; illuminating portions of the space surrounding the continuous mining machine including portions of the working face disposed forwardly thereof and adjacent portions of the roof, floor and side walls of the mined entry rearwardly of the working face; establishing electromagnetic signals indicative of the appearance of the illuminated portions of the working face of the seam and the adjacent portions of the roof, floor and side walls; transmitting the established electromagnetic signals to a remote control station; converting at the remote control station the transmitted electromagnetic signals to a continuous picture of the appearance of at least a selected portion of the illuminated portions of the working face of the seam and the adjacent portions of the roof, floor and side walls; and controlling from the remote control station the cutting cycle of the continuous mining machine so that the material cut during a cycle is cut from the seam up to the different material defining the roof and down to the different material defining the floor based upon visually distinguishing between the material of the seam and the different material which forms the roof and floor by viewing the continuous picture provided at the remote control station and apparatus for carrying out the method.

  9. Incorporation of Catalytic Compounds in the Porosity of SiC Wall...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Incorporation of Catalytic Compounds in the Porosity of SiC Wall Flow Filters - 4 Way Catalyst and DeNOx Application examples Incorporation of Catalytic Compounds in the Porosity...

  10. The Economic Impact of Coal Mining in New Mexico

    SciTech Connect (OSTI)

    Peach, James; Starbuck, C.

    2009-06-01

    The economic impact of coal mining in New Mexico is examined in this report. The analysis is based on economic multipliers derived from an input-output model of the New Mexico economy. The direct, indirect, and induced impacts of coal mining in New Mexico are presented in terms of output, value added, employment, and labor income for calendar year 2007. Tax, rental, and royalty income to the State of New Mexico are also presented. Historical coal production, reserves, and price data are also presented and discussed. The impacts of coal-fired electricity generation will be examined in a separate report.

  11. Surface Mining Control and Reclamation Act: A Utah perspective

    SciTech Connect (OSTI)

    Nielson, D.

    1989-01-01

    The authority to regulate the coal industry at the state level, under state statute and rules, the importance of the coal industry to the state, the importance of an environmentally sound regulatory program, and the benefit of a state-managed abandoned mine reclamation program, in short the ability of the state to manage its own natural resources, make state primacy a necessity, not an option. Implementation of SMCRA cannot be measured in the myriad of oversight statistics. Effectiveness means cost-effective, timely reclamation of abandoned sites; consistent, workable rules and regulatory practices; responsive program management; and compliance which is internalized in the mine's operations.

  12. Update on use of mine pool water for power generation.

    SciTech Connect (OSTI)

    Veil, J. A.; Puder, M. G.; Environmental Science Division

    2006-09-30

    In 2004, nearly 90 percent of the country's electricity was generated at power plants using steam-based systems (EIA 2005). Electricity generation at steam electric plants requires a cooling system to condense the steam. With the exception of a few plants using air-cooled condensers, most U.S. steam electric power plants use water for cooling. Water usage occurs through once-through cooling or as make-up water in a closed-cycle system (generally involving one or more cooling towers). According to a U.S. Geological Survey report, the steam electric power industry withdrew about 136 billion gallons per day of fresh water in 2000 (USGS 2005). This is almost the identical volume withdrawn for irrigation purposes. In addition to fresh water withdrawals, the steam electric power industry withdrew about 60 billion gallons per day of saline water. Many parts of the United States are facing fresh water shortages. Even areas that traditionally have had adequate water supplies are reaching capacity limits. New or expanded steam electric power plants frequently need to turn to non-traditional alternate sources of water for cooling. This report examines one type of alternate water source-groundwater collected in underground pools associated with coal mines (referred to as mine pool water in this report). In 2003, the U.S. Department of Energy's (DOE's) National Energy Technology Laboratory (NETL) funded Argonne National Laboratory (Argonne) to evaluate the feasibility of using mine pool water in Pennsylvania and West Virginia. That report (Veil et al. 2003) identified six small power plants in northeastern Pennsylvania (the Anthracite region) that had been using mine pool water for over a decade. It also reported on a pilot study underway at Exelon's Limerick Generating Station in southeastern Pennsylvania that involved release of water from a mine located about 70 miles upstream from the plant. The water flowed down the Schuylkill River and augmented the natural flow so that the Limerick plant could withdraw a larger volume of river water. The report also included a description of several other proposed facilities that were planning to use mine pool water. In early 2006, NETL directed Argonne to revisit the sites that had previously been using mine pool water and update the information offered in the previous report. This report describes the status of mine pool water use as of summer 2006. Information was collected by telephone interviews, electronic mail, literature review, and site visits.

  13. Nature-oriented open coal mining technologies using mined-out space in an open-pit. Part II: A method for selecting rational sequence of mining flat dipping stratified deposits

    SciTech Connect (OSTI)

    Molotilov, S.G.; Norri, V.K.; Cheskidov, V.I.; Mattis, A.R.

    2007-01-15

    A method is proposed for selecting a rational mining sequence with internal dumping for flat stratified deposits, using new principles of the open-pit process-space formation and development. The main criteria for substantiating the mining sequence are geometrical form and development direction of the open-pit space, structure of the working wall and transportation network, internal dumping capacities and mining earthworks volumes.

  14. In-mine evaluation of catalyzed diesel particulate filters at two underground metal mines. Report of investigations/1995

    SciTech Connect (OSTI)

    Watts, W.F.; Cantrell, B.K.; Bickel, K.L.; Olson, K.S.; Rubow, K.L.

    1995-11-01

    The U.S. Bureau of Mines evaluated the performance of a catalyzed diesel particulate filter (CDPF) and a CDPF combined with a diesel oxidation catalyst (DOC) at two metal mines. This paper describes the results from the two field evaluations. The CDPF/DOC was installed on an Elphinstone load-haul-dump (LHD) powered by a Caterpillar 3306 prechambered, turbocharged engine. The CDPF was installed on a Tamrock diesel-hydraulic roof-bolting jumbo, powered by a Deutz F6L912W engine. The underground evaluation at this mine was more difficult because of frequent movement by the roof-bolting jumbo, variation in the daily workload, tremendous fluctuation in ventilation air flow rate and the use of a high sulfur diesel fuel, which promotes the formation of sulfate particles, decreases filtration efficiency, and hastens the deterioration of the catalyst.

  15. Incorporation of learning curve costs in acquisition strategy optimization

    SciTech Connect (OSTI)

    Loerch, A.

    1994-12-31

    Each year, the United States Army procures billions of dollars worth of weapons and equipment so that it can accomplish its worldwide mission of deterrence. The process of deciding what to buy, in what quantities, and when to best respond to the threat posed by potential adversaries, is extremely complex, requiring extensive analysis. Two techniques commonly used in this analysis are mathematical programming and cost estimation. Although they are related through constraints on available procurement funds, the use of nonlinear cost learning curves, which more accurately represent system costs as a function of quantity produced, have not been incorporated into mathematical programming formulations that compute the quantities of items to be procured. As a result, the solutions obtained could be either suboptimal, or even infeasible with respect to budgetary limitations. We present a mixed integer programming formulation that uses a piecewise linear approximation of the learning curve costs for a more accurate portrayal of budgetary constraints. In addition, implementation issues are discussed, and performance results are given.

  16. Incorporating Non-energy Benefits into Energy Savings Performance Contracts

    SciTech Connect (OSTI)

    Larsen, Peter; Goldman, Charles; Gilligan, Donald; Singer, Terry

    2012-06-01

    This paper evaluates the issue of non-energy benefits within the context of the U.S. energy services company (ESCO) industry?a growing industry comprised of companies that provide energy savings and other benefits to customers through the use of performance-based contracting. Recent analysis has found that ESCO projects in the public/institutional sector, especially at K-12 schools, are using performance-based contracting, at the behest of the customers, to partially -- but not fully -- offset substantial accumulated deferred maintenance needs (e.g., asbestos removal, wiring) and measures that have very long paybacks (roof replacement). This trend is affecting the traditional economic measures policymakers use to evaluate success on a benefit to cost basis. Moreover, the value of non-energy benefits which can offset some or all of the cost of the non-energy measures -- including operations and maintenance (O&M) savings, avoided capital costs, and tradable pollution emissions allowances-- are not always incorporated into a formal cost-effectiveness analysis of ESCO projects. Nonenergy benefits are clearly important to customers, but state and federal laws that govern the acceptance of these types of benefits for ESCO projects vary widely (i.e., 0-100percent of allowable savings can come from one or more non-energy categories). Clear and consistent guidance on what types of savings are recognized in Energy Savings agreements under performance contracts is necessary, particularly where customers are searching for deep energy efficiency gains in the building sector.

  17. OPF incorporating load models maximizing net revenue. [Optimal Power Flow

    SciTech Connect (OSTI)

    Dias, L.G.; El-Hawary, M.E. . Dept. of Electrical Engineering)

    1993-02-01

    Studies of effects of load modeling in optimal power flow studies using minimum cost and minimum loss objective reveal that a main disadvantage of cost minimization is the reduction of the objective via a reduction in the power demand. This inevitably results in lowering the total revenue and in most cases, reducing net revenue as well. An alternative approach for incorporating load models in security-constrained OPF (SCOPF) studies apparently avoids reducing the total power demand for the intact system, but reduces the voltages. A study of the behavior of conventional OPF solutions in the presence of loads not controlled by ULTC's shows that this result in a reducing the total power demand for the intact system. In this paper, the authors propose an objective that avoids the tendency to lower the total power demand, total revenue and net revenue, for OPF neglecting contingencies (normal OPF), as well as for security-constrained OPF. The minimum cost objective is modified by subtracting the total power demand from the total fuel cost. This is equivalent to maximizing the net revenue.

  18. Energy Efficiency Measures to Incorporate into Remodeling Projects

    SciTech Connect (OSTI)

    Liaukus, C.

    2014-12-01

    Energy improvements in a home are often approached as one concerted effort, beginning with a simple walk-through assessment or more in-depth energy audit and followed by the installation of recommended energy measures. While this approach allows for systems thinking to guide the efforts, comprehensive energy improvements of this nature are undertaken by a relatively small number of U.S. households compared to piecemeal remodeling efforts. In this report, the U.S Department of Energy Building America Retrofit Alliance research team examines the improvement of a home’s energy performance in an opportunistic way by examining what can be done to incorporate energy efficiency measures into general remodeling work and home repair projects. This allows for energy efficiency upgrades to occur at the same time as remodeling proejcts. There are challenges to this approach, not the least of which being that the work will take place over time in potentially many separate projects. The opportunity to improve a home’s energy efficiency at one time expands or contracts with the scope of the remodel. As such, guidance on how to do each piece thoughtfully and with consideration for potential future projects, is critical.

  19. Energy Efficiency Measures to Incorporate into Remodeling Projects

    SciTech Connect (OSTI)

    Liaukus, C.

    2014-12-01

    Energy improvements in a home are often approached as one concerted effort, beginning with a simple walk-through assessment or more in-depth energy audit and followed by the installation of recommended energy measures. While this approach allows for systems thinking to guide the efforts, comprehensive energy improvements of this nature are undertaken by a relatively small number of the households in our nation compared to more piecemeal remodeling efforts. Even when programs like the Weatherization Assistance Program and Home Performance with ENERGY STAR are considered, homes that have had a comprehensive energy makeover still represent a small fraction of the 111.1 million households. In this report, the U.S Department of Energy Building America Retrofit Alliance research team looks at the improvement of a home's energy performance in an opportunistic way: it examines what can be done to incorporate energy efficiency measures into general remodeling work and home repair projects. This allows for the possibility for people who would not normally pursue energy efficiency but will remodel their kitchen or re-side their home to improve their home's performance at the same time. There are challenges to this approach, not the least of which being that the work will take place over time in potentially many separate projects. The opportunity to improve a home's energy efficiency at one time expands or contracts with the scope of the remodel. As such, guidance on how to do each piece thoughtfully and with consideration for potential future projects, is critical.

  20. Types and causes of haulage-system delays out by the face in US underground coal mines. Final report. [Data from 5 mines

    SciTech Connect (OSTI)

    Douglas, W.J.; Kiefer, J.A.; Kohler, J.L.

    1982-04-01

    This report summarizes the results of a study to characterize and quantify the occurrence and impact of outby haulage delays on production in US underground coal mines. An instrumentation system employing digital data loggers was used to acquire data for over 500 belt shifts in six mines. Observers collected section production data and section delay data to supplement the haulage database. A statistical data reduction system was applied to develop statistics on failure rates and delay lengths. A production impact model was developed and applied to analyze the effect of reducing delays and implementing engineering changes to the haulage systems. Analytical investigations of the relationship between delays and mine characteristics were conducted, and the impact of feeder-breakers and bunkerage, and the addition of longwall units to existing mines was investigated. The study provides a quantitative information base on underground belt haulage delays for use by mining companies and mining researchers.

  1. Effective Conveyor Belt Inspection for Improved Mining Productivity

    SciTech Connect (OSTI)

    Chris Fromme

    2006-06-01

    This document details progress on the project entitled ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2004 to May 14, 2004. Highlights include fabrication of low-cost prototype hardware, acquisition of infrared thermal data, and initial design of a Smart-Camera based system.

  2. Effective Conveyor Belt Inspection for Improved Mining Productivity

    SciTech Connect (OSTI)

    Chris Fromme

    2006-06-01

    This document details progress on the project entitled ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2004 to May 14, 2004. Highlights include fabrication of an improved LED lightbar, fabrication of a line-scan sensor head for the Smart-Camera based prototype, and development of prototype vulcanized splice detection algorithms.

  3. Remote mining for in-situ waste containment. Final report

    SciTech Connect (OSTI)

    Martinelli, D.; Banta, L.; Peng, S.

    1995-10-01

    This document presents the findings of a study conducted at West Virginia University to determine the feasibility of using a combination of longwall mining and standard landfill lining technologies to mitigate contamination of groundwater supplies by leachates from hazardous waste sites.

  4. Evaluation of the Kloswall longwall mining system. Final report

    SciTech Connect (OSTI)

    Not Available

    1982-04-01

    This report presents the results of design studies and critical requiremental tests of a new longwall mining system specifically designed to extract a very deep web (48 inches or deeper) from a longwall panel. The report includes a productivity and cost analysis comparing the new mining system with a conventional longwall operation taking a 30-inch wide web. The analysis shows the new system will increase annual production and return on investment in most cases. The report also includes conceptual drawings and specifications for a high capacity three-drum shearer and a unique shield type of roof support specifically designed for very wide web operation. The advantages and problems associated with wide web mining are discussed in general and as they relate specifically to the equipment selected for the new mining system. Details of the critical testing and the test results are presented. The study concludes by recommending that surface tests of the haulage and guidance system be conducted as the follow-on work.

  5. EXAFS of heavy metal coordination in acid mine drainage sediments

    SciTech Connect (OSTI)

    Carroll, S.; O`Day, P.; Waychunas, G.; Phillips, B.

    1995-12-01

    We use extended x-ray adsorption fine structure (EXAFS) spectroscopy to examine the chemical environment of zinc (1-2 wt. %), lead (300-600 ppm) and cadmium (50-200 ppm) in complex acid mine drainage sediments from the Tri-State Mining District (KS, MO, OK). The sediments in streams draining tailings piles and open mine shafts are dominated by quartz or amorphous iron hydroxides; accessory minerals include calcite. The bulk water chemistry is buffered by the limestone geology and is undersaturated with respect to pure heavy metal carbonates and hydroxides. EXAFS spectra of the sediment samples were taken at SSRL with a fluorescence detector at low temperature ({approximately}10 K). Heavy metals do not form pure carbonate or hydroxide phases, nor do they appear to sorb to quartz surfaces. In sediments near the mine source, the metals are present primarily as sulfides, the original host mineral. With increasing distance from the source, second-neighbor backscattering from Fe indicates that the metals leached from the sulfides are taken up with amorphous iron hydroxides.

  6. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    SciTech Connect (OSTI)

    Kenneth L. Knittel

    2005-05-09

    The work performed on this program was to develop wear resistant, tough FM composite materials with efforts focused on WC-Co based FM systems. The materials were developed for use in mining industry wear applications. Components of interest were drill bit inserts for drilling blast holes. Other component applications investigated included wear plates for a variety of equipment such as pit shovels, wear surfaces for conveyors, milling media for ball milling operations, hydrocyclone cones, grader blades and dozer teeth. Cross-cutting technologies investigated included hot metal extrusion dies, drill bits for circuit board fabrication, cutting tools for cast iron and aluminum machining. An important part of the work was identification of the standard materials used in drilling applications. A materials trade study to determine those metals and ceramics used for mining applications provided guidance for the most important materials to be investigated. WC-Co and diamond combinations were shown to have the most desirable properties. Other considerations such as fabrication technique and the ability to consolidate shifted the focus away from diamond materials and toward WC-Co. Cooperating partners such as Kennametal and Kyocera assisted with supplies, evaluations of material systems, fabricated parts and suggestions for cross-cutting technology applications for FM architectures. Kennametal provided the raw materials (WC-Co and Al-TiCN powders) for the extent of the material evaluations. Kyocera shared their research into various FM systems and provided laboratory testing of fabricated materials. Kyocera also continued research of the FM systems with the intention of developing commercial markets for a variety of applications. The continued development of FM technology by Kyocera is seen as a direct result of the cooperation established under this funding. Kyocera has a specific interest in the commercial development of the FM technology and have licensed it and have paid for the right to develop FM materials for the commercial exploitation. Field testing provided by partners Superior Rock Bit and Brady Mining and Construction provided insight into the performance of the fabricated materials under actual operational conditions. Superior Rock Bit was permitted to evaluate tri-cone roller bits in drilling applications at a mine in the Iron Range of Minnesota. Brady performed evaluation of the roof bit inserts at coal mines in medium hardness strata. The coal mine used for testing was not revealed. Additional field testing of cross-cutting technology, the extrusion of hot metals, at Extruded Metals showed the potential for additional market development. While ACR was able to perform field testing in a number of mines, tunnel boring locations and at a hot metal extrusion house under this effort, limitations of material suppliers reduced our ability to take advantage of the offered facilities at mines in the southern Arizona region. Phelps Dodge mine at Green Valley Arizona provided equipment inserts to modify for evaluation. It was a lack of available standard materials that prevented a field test to evaluate the ACR FM inserts in the application at the Green Valley mine. Efforts to develop an alternate copper electrowinning anode were pursued with additional funding from DOE. Material systems were fabricated and evaluated by research partner Hazen Research. While a drop-in replacement was not identified promising directions for future research were suggested.

  7. Big River mine tailings Superfund site lead exposure study, Jefferson City, Missouri. Final report

    SciTech Connect (OSTI)

    Murgueytio, A.M.; Clardy, S.A.; Sterling, D.A.; Shadel, B.N.; Clements, B.W.

    1998-08-01

    The purpose of this study was to determine if living close to the Big River Mine Tailings Superfund site increased blood lead levels of resident children and what contribution mining waste had to any increase. The results of this study indicated that blood lead levels were a product of exposure to lead mining waste, lead-based paint, and other sources. Because the only substantial difference between the study and control areas, in terms of exposure to lead, was the presence of lead mining, mining waste is the reasonable explanation for the difference between the blood lead levels in the two communities.

  8. Incorporating Genomics and Bioinformatics across the Life Sciences Curriculum

    SciTech Connect (OSTI)

    Ditty, Jayna L.; Kvaal, Christopher A.; Goodner, Brad; Freyermuth, Sharyn K.; Bailey, Cheryl; Britton, Robert A.; Gordon, Stuart G.; Heinhorst, Sabine; Reed, Kelynne; Xu, Zhaohui; Sanders-Lorenz, Erin R.; Axen, Seth; Kim, Edwin; Johns, Mitrick; Scott, Kathleen; Kerfeld, Cheryl A.

    2011-08-01

    Undergraduate life sciences education needs an overhaul, as clearly described in the National Research Council of the National Academies publication BIO 2010: Transforming Undergraduate Education for Future Research Biologists. Among BIO 2010's top recommendations is the need to involve students in working with real data and tools that reflect the nature of life sciences research in the 21st century. Education research studies support the importance of utilizing primary literature, designing and implementing experiments, and analyzing results in the context of a bona fide scientific question in cultivating the analytical skills necessary to become a scientist. Incorporating these basic scientific methodologies in undergraduate education leads to increased undergraduate and post-graduate retention in the sciences. Toward this end, many undergraduate teaching organizations offer training and suggestions for faculty to update and improve their teaching approaches to help students learn as scientists, through design and discovery (e.g., Council of Undergraduate Research [www.cur.org] and Project Kaleidoscope [www.pkal.org]). With the advent of genome sequencing and bioinformatics, many scientists now formulate biological questions and interpret research results in the context of genomic information. Just as the use of bioinformatic tools and databases changed the way scientists investigate problems, it must change how scientists teach to create new opportunities for students to gain experiences reflecting the influence of genomics, proteomics, and bioinformatics on modern life sciences research. Educators have responded by incorporating bioinformatics into diverse life science curricula. While these published exercises in, and guidelines for, bioinformatics curricula are helpful and inspirational, faculty new to the area of bioinformatics inevitably need training in the theoretical underpinnings of the algorithms. Moreover, effectively integrating bioinformatics into courses or independent research projects requires infrastructure for organizing and assessing student work. Here, we present a new platform for faculty to keep current with the rapidly changing field of bioinformatics, the Integrated Microbial Genomes Annotation Collaboration Toolkit (IMG-ACT). It was developed by instructors from both research-intensive and predominately undergraduate institutions in collaboration with the Department of Energy-Joint Genome Institute (DOE-JGI) as a means to innovate and update undergraduate education and faculty development. The IMG-ACT program provides a cadre of tools, including access to a clearinghouse of genome sequences, bioinformatics databases, data storage, instructor course management, and student notebooks for organizing the results of their bioinformatic investigations. In the process, IMG-ACT makes it feasible to provide undergraduate research opportunities to a greater number and diversity of students, in contrast to the traditional mentor-to-student apprenticeship model for undergraduate research, which can be too expensive and time-consuming to provide for every undergraduate. The IMG-ACT serves as the hub for the network of faculty and students that use the system for microbial genome analysis. Open access of the IMG-ACT infrastructure to participating schools ensures that all types of higher education institutions can utilize it. With the infrastructure in place, faculty can focus their efforts on the pedagogy of bioinformatics, involvement of students in research, and use of this tool for their own research agenda. What the original faculty members of the IMG-ACT development team present here is an overview of how the IMG-ACT program has affected our development in terms of teaching and research with the hopes that it will inspire more faculty to get involved.

  9. PEM Electrolyzer Incorporating an Advanced Low-Cost Membrane

    SciTech Connect (OSTI)

    Hamdan, Monjid

    2013-08-29

    The Department of Energy (DOE) has identified hydrogen production by electrolysis of water at forecourt stations as a critical technology for transition to the hydrogen economy; however, the cost of hydrogen produced by present commercially available electrolysis systems is considerably higher than the DOE 2015 and 2020 cost targets. Analyses of proton-exchange membrane (PEM) electrolyzer systems indicate that reductions in electricity consumption and electrolyzer stack and system capital cost are required to meet the DOE cost targets. The primary objective is to develop and demonstrate a cost-effective energy-based system for electrolytic generation of hydrogen. The goal is to increase PEM electrolyzer efficiency and to reduce electrolyzer stack and system capital cost to meet the DOE cost targets for distributed electrolysis. To accomplish this objective, work was conducted by a team consisting of Giner, Inc. (Giner), Virginia Polytechnic Institute & University (VT), and domnick hunter group, a subsidiary of Parker Hannifin (Parker). The project focused on four (4) key areas: (1) development of a high-efficiency, high-strength membrane; (2) development of a long-life cell-separator; (3) scale-up of cell active area to 290 cm2 (from 160 cm); and (4) development of a prototype commercial electrolyzer system. In each of the key stack development areas Giner and our team members conducted focused development in laboratory-scale hardware, with analytical support as necessary, followed by life-testing of the most promising candidate materials. Selected components were then scaled up and incorporated into low-cost scaled-up stack hardware. The project culminated in the fabrication and testing of a highly efficient electrolyzer system for production of 0.5 kg/hr hydrogen and validation of the stack and system in testing at the National Renewable Energy Laboratory (NREL).

  10. Western surface mine permitting and reclamation. Volume 2. Contractor documents. Part B. Hydrologic evaluation and reclamation technologies for western surface coal mining

    SciTech Connect (OSTI)

    Not Available

    1986-07-01

    The report presents an analysis of the hydrologic evaluation and reclamation technologies of western surface coal mining as they have evolved and advanced since passage of the Federal Surface Mine Control and Reclamation Act of 1977 (SMCRA). The primary emphasis of the report is threefold, addressing: Hydrologic data used in the preparation and review of mining and reclamation plans. Analytical techniques used to predict and evaluate the hydrologic impacts of mining. Evaluation criteria used to determine the success of hydrologic restoration. The report also discusses special reclamation practices used to preserve and restore the essential hydrologic functions of alluvial valley floors.

  11. Department of the Interior's Office of Surface Mining should more fully recover or eliminate its costs of regulating coal mining

    SciTech Connect (OSTI)

    Not Available

    1985-05-28

    The Department of the Interior's Office of Surface Mining Reclamation and Enforcement (OSM) is spending about $65 million annually to implement regulatory program requirements of the Surface Mining Control and Reclamation Act of 1977. The act requires the regulatory authority, whether OSM or that of a state with an OSM-approved program, to charge fees to mining operators for reviewing, enforcing, and administering coal mine operating permits and authorizes that the amount of such fees can fully recover costs. The OSM and states assess certain fees, but the fees recover only a small portion of their program costs. GAO found that if OSM and states fully recovered their regulatory costs, OSM could save over $50 million a year and the impact on coal demand and production would be minimal. GAO recommends that the Secretary of the Interior collect fees that fully recover OSM's regulatory costs, phase out or substantially reduce financial assistance to states, and encourage states to fully recover their own costs.

  12. Mortality in Appalachian coal mining regions: the value of statistical life lost

    SciTech Connect (OSTI)

    Hendryx, M.; Ahern, M.M.

    2009-07-15

    We examined elevated mortality rates in Appalachian coal mining areas for 1979-2005, and estimated the corresponding value of statistical life (VSL) lost relative to the economic benefits of the coal mining industry. We compared age-adjusted mortality rates and socioeconomic conditions across four county groups: Appalachia with high levels of coal mining, Appalachia with lower mining levels, Appalachia without coal mining, and other counties in the nation. We converted mortality estimates to VSL estimates and compared the results with the economic contribution of coal mining. We also conducted a discount analysis to estimate current benefits relative to future mortality costs. The heaviest coal mining areas of Appalachia had the poorest socioeconomic conditions. Before adjusting for covariates, the number of excess annual age-adjusted deaths in coal mining areas ranged from 3,975 to 10,923, depending on years studied and comparison group. Corresponding VSL estimates ranged from $18.563 billion to $84.544 billion, with a point estimate of $50.010 billion, greater than the $8.088 billion economic contribution of coal mining. After adjusting for covariates, the number of excess annual deaths in mining areas ranged from 1,736 to 2,889, and VSL costs continued to exceed the benefits of mining. Discounting VSL costs into the future resulted in excess costs relative to benefits in seven of eight conditions, with a point estimate of $41.846 billion.

  13. Spoil handling and reclamation costs at a contour surface mine in steep slope Appalachian topography

    SciTech Connect (OSTI)

    Zipper, C.E.; Hall, A.T.; Daniels, W.L.

    1985-12-09

    Accurate overburden handling cost estimation methods are essential to effective pre-mining planning for post-mining landforms and land uses. With the aim of developing such methods, the authors have been monitoring costs at a contour surface mine in Wise County, Virginia since January 1, 1984. Early in the monitoring period, the land was being returned to its Approximate Original Contour (AOC) in a manner common to the Appalachian region since implementation of the Surface Mining Control and Reclamation Act of 1977 (SMCRA). More recently, mining has been conducted under an experimental variance from the AOC provisions of SMCRA which allowed a near-level bench to be constructed across the upper surface of two mined points and an intervening filled hollow. All mining operations are being recorded by location. The cost of spoil movement is calculated for each block of coal mined between January 1, 1984, and August 1, 1985. Per cubic yard spoil handling and reclamation costs are compared by mining block. The average cost of spoil handling was $1.90 per bank cubic yard; however, these costs varied widely between blocks. The reasons for those variations included the landscape positions of the mining blocks and spoil handling practices. The average reclamation cost was $0.08 per bank cubic yard of spoil placed in the near level bench on the mined point to $0.20 for spoil placed in the hollow fill. 2 references, 4 figures.

  14. Characterization of cores from an in-situ recovery mined uranium deposit in Wyoming: Implications for post-mining restoration

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    WoldeGabriel, G.; Boukhalfa, H.; Ware, S. D.; Cheshire, M.; Reimus, P.; Heikoop, J.; Conradson, S. D.; Batuk, O.; Havrilla, G.; House, B.; et al

    2014-10-08

    In-situ recovery (ISR) of uranium (U) from sandstone-type roll-front deposits is a technology that involves the injection of solutions that consist of ground water fortified with oxygen and carbonate to promote the oxidative dissolution of U, which is pumped to recovery facilities located at the surface that capture the dissolved U and recycle the treated water. The ISR process alters the geochemical conditions in the subsurface creating conditions that are more favorable to the migration of uranium and other metals associated with the uranium deposit. There is a lack of clear understanding of the impact of ISR mining on themore » aquifer and host rocks of the post-mined site and the fate of residual U and other metals within the mined ore zone. We performed detailed petrographic, mineralogical, and geochemical analyses of several samples taken from about 7 m of core of the formerly the ISR-mined Smith Ranch–Highland uranium deposit in Wyoming. We show that previously mined cores contain significant residual uranium (U) present as coatings on pyrite and carbonaceous fragments. Coffinite was identified in three samples. Core samples with higher organic (> 1 wt.%) and clay (> 6–17 wt.%) contents yielded higher 234U/238U activity ratios (1.0–1.48) than those with lower organic and clay fractions. The ISR mining was inefficient in mobilizing U from the carbonaceous materials, which retained considerable U concentrations (374–11,534 ppm). This is in contrast with the deeper part of the ore zone, which was highly depleted in U and had very low 234U/238U activity ratios. This probably is due to greater contact with the lixiviant (leaching solution) during ISR mining. EXAFS analyses performed on grains with the highest U and Fe concentrations reveal that Fe is present in a reduced form as pyrite and U occurs mostly as U(IV) complexed by organic matter or as U(IV) phases of carbonate complexes. Moreover, U–O distances of ~ 2.05 Å were noted, indicating the potential formation of other poorly defined U(IV/VI) species. We also noted a small contribution from Udouble bond; length as m-dashO at 1.79 Å, which indicates that U is partially oxidized. There is no apparent U–S or U–Fe interaction in any of the U spectra analyzed. However, SEM analysis of thin sections prepared from the same core material reveals surficial U associated with pyrite which is probably a minor fraction of the total U present as thin coatings on the surface of pyrite. Our data show the presence of different structurally variable uranium forms associated with the mined cores. U associated with carbonaceous materials is probably from the original U mobilization that accumulated in the organic matter-rich areas under reducing conditions during shallow burial diagenesis. U associated with pyrite represents a small fraction of the total U and was likely deposited as a result of chemical reduction by pyrite. Our data suggest that areas rich in carbonaceous materials had limited exposure to the lixiviant solution, continue to be reducing, and still hold significant U resources. Because of their limited access to fluid flow, these areas might not contribute significantly to post-mining U release or attenuation. Areas with pyrite that are accessible to fluids seem to be more reactive and could act as reductants and facilitate U reduction and accumulation, limiting its migration.« less

  15. Dynamic Slope Stability Analysis of Mine Tailing Deposits: the Case of Raibl Mine

    SciTech Connect (OSTI)

    Roberto, Meriggi; Marco, Del Fabbro; Erica, Blasone; Erica, Zilli

    2008-07-08

    Over the last few years, many embankments and levees have collapsed during strong earthquakes or floods. In the Friuli Venezia Giulia Region (North-Eastern Italy), the main source of this type of risk is a slag deposit of about 2x10{sup 6} m{sup 3} deriving from galena and lead mining activity until 1991 in the village of Raibl. For the final remedial action plan, several in situ tests were performed: five boreholes equipped with piezometers, four CPTE and some geophysical tests with different approaches (refraction, ReMi and HVSR). Laboratory tests were conducted on the collected samples: geotechnical classification, triaxial compression tests and constant head permeability tests in triaxial cell. Pressure plate tests were also done on unsaturated slag to evaluate the characteristic soil-water curve useful for transient seepage analysis. A seepage analysis was performed in order to obtain the maximum pore water pressures during the intense rainfall event which hit the area on 29th August 2003. The results highlight that the slag low permeability prevents the infiltration of rainwater, which instead seeps easily through the boundary levees built with coarse materials. For this reason pore water pressures inside the deposits are not particularly influenced by rainfall intensity and frequency. Seismic stability analysis was performed with both the pseudo-static method, coupled with Newmark's method, and dynamic methods, using as design earthquake the one registered in Tolmezzo (Udine) on 6{sup th} May 1976. The low reduction of safety factors and the development of very small cumulative displacements show that the stability of embankments is assured even if an earthquake of magnitude 6.4 and a daily rainfall of 141.6 mm occur at the same time.

  16. U.S. CHP Installations Incorporating Thermal Energy Storage (TES) and/or

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Turbine Inlet Cooling (TIC), September 2003 | Department of Energy CHP Installations Incorporating Thermal Energy Storage (TES) and/or Turbine Inlet Cooling (TIC), September 2003 U.S. CHP Installations Incorporating Thermal Energy Storage (TES) and/or Turbine Inlet Cooling (TIC), September 2003 This 2003 chart of U.S. CHP installations incorporating Thermal Energy Storage (TES) and/or Turbine Inlet Cooling (TIC) was prepared by the Cool Solutions Company of Lisle, Illinois, for UT-Battelle,

  17. Model Guidelines for Incorporating Energy Efficiency and Renewable EnerÞ~/

    Office of Environmental Management (EM)

    | Department of Energy Model Guidelines for Incorporating Energy Efficiency and Renewable EnerÞ~/ Model Guidelines for Incorporating Energy Efficiency and Renewable EnerÞ~/ PDF icon sep_emergency_plan_guide.pdf More Documents & Publications Problems and Solutions: Training Disaster Organizations of the Use of PV Incorporating Energy Efficiency into Disaster Recovery Efforts Coordinating Energy Efficiency with Other Disaster Resiliency Services

  18. Database (Report) of U.S. CHP Installations Incorporating Thermal Energy

    Office of Environmental Management (EM)

    Storage (TES) and/or Turbine Inlet Cooling (TIC), 2004 | Department of Energy Database (Report) of U.S. CHP Installations Incorporating Thermal Energy Storage (TES) and/or Turbine Inlet Cooling (TIC), 2004 Database (Report) of U.S. CHP Installations Incorporating Thermal Energy Storage (TES) and/or Turbine Inlet Cooling (TIC), 2004 The primary objective of this project was to develop a database of combined heat and power (CHP) installations incorporating TES and/or TIC systems, throughout

  19. Site-specific study on stabilization of acid-generating mine tailings using coal fly ash

    SciTech Connect (OSTI)

    Shang, J.Q.; Wang, H.L.; Kovac, V.; Fyfe, J.

    2006-03-15

    A site-specific study on stabilizing acid-generating mine tailings from Sudbury Mine using a coal fly ash from Nanticoke Generating Station is presented in this paper. The objective of the study is to evaluate the feasibility of codisposal of the fly ash and mine tailings to reduce environmental impacts of Sudbury tailings disposal sites. The study includes three phases, i.e., characterization of the mine tailings, and coal fly ash, oxidation tests on the mine tailings and kinetic column permeation tests. The results of the experiments indicate that when permeated with acid mine drainage, the hydraulic conductivity of Nanticoke coal fly ash decreased more than three orders of magnitude (from 1 x 10{sup -6} to 1 x 10{sup -9} cm/s), mainly due to chemical reactions between the ash solids and acid mine drainage. Furthermore, the hydraulic gradient required for acid mine drainage to break through the coal fly ash is increased up to ten times (from 17 to 150) as compared with that for water. The results also show that the leachate from coal fly ash neutralizes the acidic pore fluid of mine tailings. The concentrations of trace elements in effluents from all kinetic column permeation tests indicated that coplacement of coal fly ash with mine tailings has the benefit of immobilizing trace elements, especially heavy metals. All regulated element concentrations from effluent during testing are well below the leachate quality criteria set by the local regulatory authority.

  20. Underground coal operators install several new longwall mining systems

    SciTech Connect (OSTI)

    Fiscor, S.

    2008-02-15

    Several new names appear in the annual US Longwall Census, but the population remains the same: 52 although the number of longwall mines dropped from 40 to 47. CONSOL Energy remains the leader with 12 faces. Robert E. Murray owns 8 longwall mines followed by Arch Coal with 5 and Foundation Coal with 3. West Virginia has 13 longwalls followed by 9 in Pennsylvania, 7 in Utah and 6 in Alabama. The article describes CONSOL Energy's operations. A detailed table gives for each longwall installation, the ownership, seam height, cutting height, panel width and length, overburden, number of gate entries, depth of cut, model of equipment used (shearer, haulage system, roof support, face conveyor, stage loader, crusher, electrical controls and voltage to face). 2 tabs.

  1. The states and deregulation: The case of surface mining

    SciTech Connect (OSTI)

    Scicchitano, M.J.; Hedge, D.; Metz, P.

    1989-01-01

    The Surface Mining Control and Reclamation Act of 1977 (SMCRA), passed to correct the abuses of surface mining, assigned key implementation roles to the states. While the federal government originally enforced SMCRA states could operate the program themselves. Once states decided to run their own program the federal government would oversee them to insure they properly enforce the Act. This research examines the enforcement behavior of states in the 1980s. The results indicate that early in the Reagan administration eastern states enforced the SMCRA less stringently than other states. Eastern states increased their level of enforcement later in the 1980s in response to pressures for increased federal oversight from Congress, interest groups and others.

  2. Preliminary Notice of Violation, Fluor Hanford Incorporated- EA-2005-07

    Broader source: Energy.gov [DOE]

    Issued to Fluor Hanford, Incorporated, related to issues at the Plutonium Finishing Plant and K-Basins facilities at the Hanford Site

  3. Feasibility of high recovery highwall mining equipment. Final report

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    Three equipment systems exhibited significant promise: the RSV Miner, a surface longwall using standard underground equipment, and the variable angle auger. Other equipment systems showing considerable merit were the surface shortwall, and the two extended depth augers. Of the three most significant systems, the RSV Miner exhibits the greatest versatility and adaptability. It may be used competently in many surface mining applications and readily adapts to geologic anomalies and changing seam heights. The machine employs steering and guidance equipment and provides the necessary capabilities for extended depth operation. Safety is good, as no men are required to work underground. However, most important is the system's recovery factor of approximately 75% to 80% of the in-situ coal reserve within reach. The surface longwall system using standard underground equipment (preferably a ranging drum shearer in conjunction with shield supports) is most suited to either a trench mining or a modified area mining application. Both applications would allow the length of the face to be held constant. Another important consideration is legal requirements for a tailgate entry, which would necessitate additional equipment for development in a modified area mining application. When compared to surface shortwall, surface longwall exhibits higher productivity, a far greater equipment selection which allows system tailoring to geologic conditions, and greater roof control due to the significantly smaller section of overburden that must be supported. Recovery should approach, and possibly exceed, 90% of the coal in-place. The variable angle auger, which is currently only a concept, fills a very real need for which no other equipment is available at this time.

  4. The ABCs of pump selection for mine dewatering

    SciTech Connect (OSTI)

    Morgan, S.E.

    2008-10-15

    Choosing the right type of pump for removing water from mine operations can provide significant benefits in overall performance and cost of operation. The article describes the types of pump most commonly used: vertical turbine pumps, electric and hydraulic submersible pumps, horizontal multistage centrifugal pumps and horizontal single-stage centrifugal pumps. It gives points to consider when selecting a suitable pump, including solids handling capacity and acid content, portability, automatic operation, easy maintenance and parts availability. 1 photo.

  5. The Methane to Markets Coal Mine Methane Subcommittee meeting

    SciTech Connect (OSTI)

    2008-07-01

    The presentations (overheads/viewgraphs) include: a report from the Administrative Support Group; strategy updates from Australia, India, Italy, Mexico, Nigeria, Poland and the USA; coal mine methane update and IEA's strategy and activities; the power of VAM - technology application update; the emissions trading market; the voluntary emissions reduction market - creating profitable CMM projects in the USA; an Italian perspective towards a zero emission strategies; and the wrap-up and summary.

  6. Colorado School of Mines Technologies Available for Licensing - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Portal CSM Site Map Printable Version Share this resource About Search Categories (15) Advanced Materials Biomass and Biofuels Building Energy Efficiency Electricity Transmission Energy Analysis Energy Storage Geothermal Hydrogen and Fuel Cell Hydropower, Wave and Tidal Industrial Technologies Solar Photovoltaic Solar Thermal Startup America Vehicles and Fuels Wind Energy Partners (27) Visual Patent Search Success Stories Colorado School of Mines Technologies Available for

  7. MINING PENNSYLVANIA NATIONAL ENERGY TECHNOLOGY LAB - PA POC

    Office of Environmental Management (EM)

    MINING PENNSYLVANIA NATIONAL ENERGY TECHNOLOGY LAB - PA POC Larry Sullivan Telephone (412) 386-6115 Email larry.sullivan@netl.doe.gov Support Activities for Oil and Gas Operations 213112 WEST VIRGINIA NATIONAL ENERGY TECHNOLOGY LAB -WV POC Larry Sullivan Telephone (412) 386-6115 Email larry.sullivan@netl.doe.gov Support Activities for Oil and Gas Operations 213112 WYOMING ROCKY MOUNTAIN OILFIELD CENTER POC Jenny Krom Telephone (307) 233-4818 Email jenny.krom@rmotc.doe.gov Support Activities for

  8. Development of mine explosion ground truth smart sensors

    SciTech Connect (OSTI)

    Taylor, Steven R.; Harben, Phillip E.; Jarpe, Steve; Harris, David B.

    2015-09-14

    Accurate seismo-acoustic source location is one of the fundamental aspects of nuclear explosion monitoring. Critical to improved location is the compilation of ground truth data sets for which origin time and location are accurately known. Substantial effort by the National Laboratories and other seismic monitoring groups have been undertaken to acquire and develop ground truth catalogs that form the basis of location efforts (e.g. Sweeney, 1998; Bergmann et al., 2009; Waldhauser and Richards, 2004). In particular, more GT1 (Ground Truth 1 km) events are required to improve three-dimensional velocity models that are currently under development. Mine seismicity can form the basis of accurate ground truth datasets. Although the location of mining explosions can often be accurately determined using array methods (e.g. Harris, 1991) and from overhead observations (e.g. MacCarthy et al., 2008), accurate origin time estimation can be difficult. Occasionally, mine operators will share shot time, location, explosion size and even shot configuration, but this is rarely done, especially in foreign countries. Additionally, shot times provided by mine operators are often inaccurate. An inexpensive, ground truth event detector that could be mailed to a contact, placed in close proximity (< 5 km) to mining regions or earthquake aftershock regions that automatically transmits back ground-truth parameters, would greatly aid in development of ground truth datasets that could be used to improve nuclear explosion monitoring capabilities. We are developing an inexpensive, compact, lightweight smart sensor unit (or units) that could be used in the development of ground truth datasets for the purpose of improving nuclear explosion monitoring capabilities. The units must be easy to deploy, be able to operate autonomously for a significant period of time (> 6 months) and inexpensive enough to be discarded after useful operations have expired (although this may not be part of our business plan). Key parameters to be automatically determined are event origin time (within 0.1 sec), location (within 1 km) and size (within 0.3 magnitude units) without any human intervention. The key parameter ground truth information from explosions greater than magnitude 2.5 will be transmitted to a recording and transmitting site. Because we have identified a limited bandwidth, inexpensive two-way satellite communication (ORBCOMM), we have devised the concept of an accompanying Ground-Truth Processing Center that would enable calibration and ground-truth accuracy to improve over the duration of a deployment.

  9. Landfill mining: A critical review of two decades of research

    SciTech Connect (OSTI)

    Krook, Joakim; Svensson, Niclas; Eklund, Mats

    2012-03-15

    Highlights: Black-Right-Pointing-Pointer We analyze two decades of landfill mining research regarding trends and topics. Black-Right-Pointing-Pointer So far landfill mining has mainly been used to solve waste management issues. Black-Right-Pointing-Pointer A new perspective on landfills as resource reservoirs is emerging. Black-Right-Pointing-Pointer The potential of resource extraction from landfills is significant. Black-Right-Pointing-Pointer We outline several key challenges for realization of resource extraction from landfills. - Abstract: Landfills have historically been seen as the ultimate solution for storing waste at minimum cost. It is now a well-known fact that such deposits have related implications such as long-term methane emissions, local pollution concerns, settling issues and limitations on urban development. Landfill mining has been suggested as a strategy to address such problems, and in principle means the excavation, processing, treatment and/or recycling of deposited materials. This study involves a literature review on landfill mining covering a meta-analysis of the main trends, objectives, topics and findings in 39 research papers published during the period 1988-2008. The results show that, so far, landfill mining has primarily been seen as a way to solve traditional management issues related to landfills such as lack of landfill space and local pollution concerns. Although most initiatives have involved some recovery of deposited resources, mainly cover soil and in some cases waste fuel, recycling efforts have often been largely secondary. Typically, simple soil excavation and screening equipment have therefore been applied, often demonstrating moderate performance in obtaining marketable recyclables. Several worldwide changes and recent research findings indicate the emergence of a new perspective on landfills as reservoirs for resource extraction. Although the potential of this approach appears significant, it is argued that facilitating implementation involves a number of research challenges in terms of technology innovation, clarifying the conditions for realization and developing standardized frameworks for evaluating economic and environmental performance from a systems perspective. In order to address these challenges, a combination of applied and theoretical research is required.

  10. Stability analysis of a backfilled room-and-pillar mine. Report of investigations/1995

    SciTech Connect (OSTI)

    Tesarik, D.R.; Seymour, J.B.; Yanske, T.R.; McKibbin, R.W.

    1995-03-01

    Displacement and stress changes in cemented backfill and ore pillars at the Buick Mine, near Boss, MO, were monitored by engineers from the U.S. Bureau of Mines (USBM) and The Doe Run Co., St Louis, MO. A test area in this room-and-pillar mine was backfilled to provide support when remnant ore pillars were mined. Objectives of this research were to evaluate the effect of backfill on mine stability, observe backfill conditions during pillar removal, and calibrate a numeric model to be used to design other areas of the mine. Two-dimensional, finite-element and three-dimensional, displacement-discontinuity codes were used to model the study area. Combined with instrument data, these codes identified two failed pillars.

  11. Taxation of expenditures required by the Surface Mining Control and Reclamation Act of 1977 (SMCRA)

    SciTech Connect (OSTI)

    McNally, K.J.

    1987-01-01

    There has been disagreement over whether the expenditures made by the mine operator to comply with the Surface Mining Control and Reclamation Act of 1977 are characterized as capital or deductible expenses. An examination of expenditures made by mine operators during the life of a mine illustrates the dichotomy between deductible and capital expenditures in which special rules may override general capitalization rules to allow the mine operator to deduct a capital expenditure. This makes some expenditures difficult to categorize. Citing case law, the author treats expenditures for exploration and mining permits, performance bonds, and liability insurance. A new provision, section 468, allowing the current deduction for future reclamation and closing costs removed the uncertainty created by prior case law.

  12. DEVELOPMENT AND DEMONSTRATION OF A PILOT SCALE FACILITY FOR FABRICATION AND MARKETING OF LIGHTWEIGHT-COAL COMBUSTION BYPRODUCTS-BASED SUPPORTS AND MINE VENTILATION BLOCKS FOR UNDERGROUND MINES

    SciTech Connect (OSTI)

    Yoginder P. Chugh

    2002-10-01

    The overall goal of this program was to develop a pilot scale facility, and design, fabricate, and market CCBs-based lightweight blocks for mine ventilation control devices, and engineered crib elements and posts for use as artificial supports in underground mines to replace similar wooden elements. This specific project was undertaken to (1) design a pilot scale facility to develop and demonstrate commercial production techniques, and (2) provide technical and marketing support to Fly Lite, Inc to operate the pilot scale facility. Fly Lite, Inc is a joint venture company of the three industrial cooperators who were involved in research into the development of CCBs-based structural materials. The Fly-Lite pilot scale facility is located in McLeansboro, Illinois. Lightweight blocks for use in ventilation stoppings in underground mines have been successfully produced and marketed by the pilot-scale facility. To date, over 16,000 lightweight blocks (30-40 pcf) have been sold to the mining industry. Additionally, a smaller width (6-inch) full-density block was developed in August-September 2002 at the request of a mining company. An application has been submitted to Mine Safety and Health Administration for the developed block approval for use in mines. Commercialization of cribs and posts has also been accomplished. Two generations of cribs have been developed and demonstrated in the field. MSHA designated them suitable for use in mines. To date, over 2,000 crib elements have been sold to mines in Illinois. Two generations of posts were also demonstrated in the field and designated as suitable for use in mines by MSHA. Negotiations are currently underway with a mine in Illinois to market about 1,000 posts per year based on a field demonstration in their mine. It is estimated that 4-5 million tons CCBs (F-fly ash or FBC fly ash) may be utilized if the developed products can be commercially implemented in U.S. coal and non-coal mines.

  13. Measurement and modeling of transfer functions for lightning coupling into the Sago mine.

    SciTech Connect (OSTI)

    Morris, Marvin E.; Higgins, Matthew B.

    2007-04-01

    This report documents measurements and analytical modeling of electromagnetic transfer functions to quantify the ability of cloud-to-ground lightning strokes (including horizontal arc-channel components) to couple electromagnetic energy into the Sago mine located near Buckhannon, WV. Two coupling mechanisms were measured: direct and indirect drive. These transfer functions are then used to predict electric fields within the mine and induced voltages on conductors that were left abandoned in the sealed area of the Sago mine.

  14. GIS-technologies for integrated assessment of the productive mining areas

    SciTech Connect (OSTI)

    Zamaraev, R.Y.; Oparin, V.N.; Popov, S.E.; Potapov, V.P.; Pyastunovich,O.L.

    2008-05-15

    The paper describes the bases of a new application of GIS-technologies for integrated assessment and comparison of the productive mining areas, involving a wide range of mining and technological factors, considering mineral properties, mineral occurrence conditions and geographical advantages of a mineral deposit location. The model capabilities are exemplified by a comparison of technological characteristics of coals, transportation and power supply infrastructure of the productive mining areas at the Kuznetsk Coal Basin.

  15. Woody vegetation and succession on the Fonde surface mine demonstration area, Bell County, Kentucky

    SciTech Connect (OSTI)

    Wade, G.L.; Thompson, R.L.

    1999-07-01

    The long term impact of surface mining on vegetation and plant succession has always been of concern to environmentalists and residents of Appalachia. The Fonde Surface Mine Demonstration Area is a 7.3-ha, NE-NW-aspect contour coal mine at an elevation of 562 m. It was reclaimed in 1965 to show state-of-the-art surface mine reclamation techniques consistent with then-current law and regulations after coal mining in 1959 and 1963. The mine spoils were lightly graded to control erosion and crates a bench with water control and two sediment ponds. Soil pH ranged from 2.8 to 5.9. About 80 percent of the mine was planted with 18 tree and shrub species including plantations of mixed pine, mixed hardwoods, black locust, and shrubs for wildlife. In a complete floristic inventory conducted 25 years later, the authors found the woody flora consisted of 34 families, 53 genera, and 70 species including 7 exotics. This inventory of the Fonde mine shows that a diverse forest vegetation can be reestablished after extreme disturbances in Appalachia. Black locust, yellow poplar, and Virginia pine reproduction varied significantly among plantation types. Canopy tree species significantly affected ground layer cover, total species richness, number of tree seedling species, and total number of tree seedlings present. Mine soil type affected ground layer percent cover and total species richness. Pre-SMCRA (Surface Mining Control and Reclamation Act of 1977) reclaimed and inventoried mines can be used to evaluate biodiversity on post-SMCRA mines.

  16. WIPP Team Chosen as Overall Champion at National Mine Rescue Competition |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy CBFO Manager Joe Franco (sixth from left) with the WIPP Red Team and competition officials at the 2014 National Metal and Nonmetal Mine Rescue Competition. CBFO Manager Joe Franco (sixth from left) with the WIPP Red Team and competition officials at the 2014 National Metal and Nonmetal Mine Rescue Competition. CARLSBAD, N.M. - EM's Waste Isolation Pilot Plant (WIPP) Mine Rescue Red Team was selected as overall champion from among 41 teams that participated in the

  17. Unclassified Sources Term and Radionuclide Data for Corrective Action Unit 97: Yucca Flat/Climax Mine, Nevada Test Site, Nevada, Revision 2

    SciTech Connect (OSTI)

    Peter Martian

    2009-08-01

    This report documents the evaluation of the information and data available on the unclassified source term and radionuclide contamination for CAU 97: Yucca Flat/Climax Mine. The total residual inventory of radionuclides associated with one or more tests is known as the radiologic source term (RST). The RST is comprised of radionuclides in water, glass, or other phases or mineralogic forms. The hydrologic source term (HST) of an underground nuclear test is the portion of the total RST that is released into the groundwater over time following the test. In this report, the HST represents radionuclide release some time after the explosion and does not include the rapidly evolving mechanical, thermal, and chemical processes during the explosion. The CAU 97: Yucca Flat/Climax Mine has many more detonations and a wider variety of settings to consider compared to other CAUs. For instance, the source term analysis and evaluation performed for CAUs 101 and 102: Central and Western Pahute Mesa and CAU 98: Frenchman Flat did not consider vadose zone attenuation because many detonations were located near or below the water table. However, the large number of Yucca Flat/Climax Mine tests and the location of many tests above the water table warrant a more robust analysis of the unsaturated zone. The purpose of this report is to develop and document conceptual models of the Yucca Flat/Climax Mine HST for use in implementing source terms for the Yucca Flat/Climax Mine models. This document presents future plans to incorporate the radionuclide attenuation mechanisms due to unsaturated/multiphase flow and transport within the Yucca Flat CAU scale modeling. The important processes that influence radionuclide migration for the unsaturated and saturated tests in alluvial, volcanic, and carbonate settings are identified. Many different flow and transport models developed by Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory (LANL), including original modeling of multiphase flow and transport by the Stoller-Navarro Joint Venture (SNJV), are integrated to form a general understanding of how the RST relates to the HST. This report is unlike the Frenchman Flat source term analysis because it does not calculate the HST for each test. Instead, this work only identifies the important processes that must be considered when the CAU-transport modeling is performed.

  18. Electrical installations in oil shale mines. Open file report 21 Sep 81-13 Aug 83

    SciTech Connect (OSTI)

    Gillenwater, B.B.; Kline, R.J.; Paas, N.

    1983-08-01

    This report presents recommended guidelines and regulatory changes applicable to electrical installations in underground oil shale mines. These recommendations are based on information gathered from oil shale operators, government agencies, and other knowledgeable sources familiar with existing plans for mining systems and electrical installations, and on present understanding of the problems and hazards associated with oil shale mining. Additional discussions of specific electrical problems related to oil shale mining include ground fault current levels, permissible electric wheel motors, permissible batteries and electric starting systems, intrinsically safe instrumentation, and applicability of existing test standards.

  19. Expansion of the commercial output of Estonian oil shale mining and processing

    SciTech Connect (OSTI)

    Fraiman, J.; Kuzmiv, I. [Estonian Oil Shale State Co., Jyhvi (Estonia). Scientific Research Center

    1996-09-01

    Economic and ecological preconditions are considered for the transition from monoproduct oil shale mining to polyproduct Estonian oil shale deposits. Underground water, limestone, and underground heat found in oil shale mines with small reserves can be operated for a long time using chambers left after oil shale extraction. The adjacent fields of the closed mines can be connected to the operations of the mines that are still working. Complex usage of natural resources of Estonian oil shale deposits is made possible owing to the unique features of its geology and technology. Oil shale seam development is carried out at shallow depths (40--70 m) in stable limestones and does not require expensive maintenance. Such natural resources as underground water, carbonate rocks, heat of rock mass, and underground chambers are opened by mining and are ready for utilization. Room-and-pillar mining does not disturb the surface, and worked oil shale and greenery waste heaps do not breach its ecology. Technical decisions and economic evaluation are presented for the complex utilization of natural resources in the boundaries of mine take of the ``Tammiku`` underground mine and the adjacent closed mine N2. Ten countries have already experienced industrial utilization of oil shale in small volumes for many years. Usually oil shale deposits are not notable for complex geology of the strata and are not deeply bedded. Thus complex utilization of quite extensive natural resources of Estonian oil shale deposits is of both scientific and practical interest.

  20. Land Mine Detection at TJNAF | U.S. DOE Office of Science (SC...

    Office of Science (SC) Website

    Land Mine Detection at TJNAF Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science Applications of Nuclear Science ...

  1. Setting the course for the Surface Mining Control and Reclamation Act of 1977

    SciTech Connect (OSTI)

    Beck, R.E.

    1995-12-31

    The Surface Mining Control and Reclamation Act of 1977 focuses on ensuring reclamation of the land after mining by restoring land affected to a condition capable of supporting prior uses and sets up a program for reclaiming abandoned mined land to be financed by a tax on coal produced. This article discusses the landmark legal decisions which represent major efforts to limit the federal role in the Surface Mining Control and Reclamation Act of 1977 through the Commerce Clause, the Tenth Amendment, and statutory interpretation.

  2. Restoration of surface-mined lands with rainfall harvesting

    SciTech Connect (OSTI)

    Sauer, R.H.; Rickard, W.H.

    1982-12-01

    Strip mining for coal in the arid western US will remove grazing land as energy demands are met. Conventional resotration usually includes leveling the spoil banks and covering them with top soil, fertilizing, seeding and irrigation with well or river water. An overview of research on an alternate method of restoring this land is reported. From 1976 through 1981 studies were conducted on the use of water harvesting, the collection and use of rainfall runoff, to restore the vegetative productivity of strip mined lands in arid regions. These studies tested the technical and economic feasibility of using partially leveled spoil banks at strip mines as catchment areas to collect and direct runoff to the topsoiled valley floor where crops were cultivated. Information was collected on the efficiency of seven treatments to increase runoff from the catchment areas and on the productivity of seven crops. The experiments were conducted in arid areas of Washington, Arizona, and Colorado. It was concluded that water harvesting can replace or augment expensive and inadequate supplies of well and river water in arid regions with a suitable climate. These studies showed that some treatments provided adequate runoff to produce a useful crop in the valleys, thus making this alternative approach to restoration technically feasible. This approach was also potentially economically feasible where the treatment costs of the catchment areas were low, the treatment was effective, the crop was productive and valuable, and earthmoving costs were lower than with conventional restoration involving complete leveling of spoil banks. It was also concluded that water harvesting can be made more effective with further information on catchment area treatments, which crops are most adaptable to water harvesting, the optimum incline of the catchment areas and climatic influences on water harvesting.

  3. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    SciTech Connect (OSTI)

    Mike L. Fulcher; Kenneth L. Knittel

    2004-06-08

    The work performed on this program was to develop wear resistant, tough FM composite materials with efforts focused on WC-Co based FM systems. The materials were developed for use in mining industry wear applications. Components of interest were drill bit inserts for drilling blast holes. Other component applications investigated included wear plates for a variety of equipment such as pit shovels, wear surfaces for conveyors, milling media for ball milling operations, hydrocyclone cones, grader blades and dozer teeth. Cross-cutting technologies investigated included hot metal extrusion dies, drill bits for circuit board fabrication, cutting tools for cast iron and aluminum machining. An important part of the work was identification of the standard materials used in drilling applications. A materials trade study to determine those metals and ceramics used for mining applications provided guidance for the most important materials to be investigated. WC-Co and diamond combinations were shown to have the most desirable properties. Other considerations such as fabrication technique and the ability to consolidate shifted the focus away from diamond materials and toward WC-Co. Cooperating partners such as Kennametal and Kyocera assisted with supplies, evaluations of material systems, fabricated parts and suggestions for cross-cutting technology applications for FM architectures. Kennametal provided the raw materials (WC-Co and Al-TiCN powders) for the extent of the material evaluations. Kyocera shared their research into various FM systems and provided laboratory testing of fabricated materials. Field testing provided by partners Superior Rock Bit and Brady Mining and Construction provided insight into the performance of the fabricated materials under actual operational conditions. Additional field testing of cross-cutting technology, the extrusion of hot metals, at Extruded Metals showed the potential for additional market development.

  4. ADVANCED UNDERGROUND GAS STORAGE CONCEPTS REFRIGERATED-MINED CAVERN STORAGE

    SciTech Connect (OSTI)

    1998-09-01

    Limited demand and high cost has prevented the construction of hard rock caverns in this country for a number of years. The storage of natural gas in mined caverns may prove technically feasible if the geology of the targeted market area is suitable; and economically feasible if the cost and convenience of service is competitive with alternative available storage methods for peak supply requirements. It is believed that mined cavern storage can provide the advantages of high delivery rates and multiple fill-withdrawal cycles in areas where salt cavern storage is not possible. In this research project, PB-KBB merged advanced mining technologies and gas refrigeration techniques to develop conceptual designs and cost estimates to demonstrate the commercialization potential of the storage of refrigerated natural gas in hard rock caverns. Five regions of the U.S.A. were studied for underground storage development and PB-KBB reviewed the literature to determine if the geology of these regions was suitable for siting hard rock storage caverns. Area gas market conditions in these regions were also studied to determine the need for such storage. Based on an analysis of many factors, a possible site was determined to be in Howard and Montgomery Counties, Maryland. The area has compatible geology and a gas industry infrastructure for the nearby market populous of Baltimore and Washington D.C.. As Gas temperature is lowered, the compressibility of the gas reaches an optimum value. The compressibility of the gas, and the resultant gas density, is a function of temperature and pressure. This relationship can be used to commercial advantage by reducing the size of a storage cavern for a given working volume of natural gas. This study looks at this relationship and and the potential for commercialization of the process in a storage application. A conceptual process design, and cavern design were developed for various operating conditions. Potential site locations were considered and a typical plant layout was developed. In addition a geomechanical review of the proposed cavern design was performed, evaluating the stability of the mine rooms and shafts, and the effects of the refrigerated gas temperatures on the stability of the cavern. Capital and operating cost estimates were also developed for the various temperature cases considered. The cost estimates developed were used to perform a comparative market analysis of this type of gas storage system to other systems that are commercially used in the region of the study.

  5. Rapid extinguishing of sponcom fires in underground mines

    SciTech Connect (OSTI)

    Kajdasz, Z.; Zieba, G.

    1999-07-01

    The main purpose presented in this paper is to present active and passive methods to fight a sponcom fire. The active method uses an inert gas generator called the GAG while the passive method is through the use of ventilation software. In most sponcom situations a combination of these two methods results in rapid extinguishing of the overheated areas. The presented software allows for accurate and real time analysis of the ventilation network. Application of the GAG has been proven on many occasions as an effective means of producing large volumes of inert mine atmospheres with which to fight fires.

  6. Design and Synthesis of Nucleobase-Incorporated Metal-Organic Materials |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Design and Synthesis of Nucleobase-Incorporated Metal-Organic Materials Previous Next List Zhang, Muwei; Lu, Weigang; Li, Jian-Rong; Bosch, Mathieu; Chen,Ying-Pin; Liu, Tian-Fu; Liu, Yangyang; Zhou, Hong-Cai. Design and Synthesis of Nucleobase-Incorporated Metal-Organic Materials. Inorg. Chem. Front., 1, 159-162 (2015). DOI: 10.1039/c3qi00042g design&synthesis Abstract: Two nucleobase-incorporated

  7. Preliminary Notice of Violation, Fluor Hanford, Incorporated - EA-2002-03 |

    Energy Savers [EERE]

    Department of Energy Hanford, Incorporated - EA-2002-03 Preliminary Notice of Violation, Fluor Hanford, Incorporated - EA-2002-03 August 12, 2002 Issued to Fluor Hanford, Incorporated, related to Quality Assurance issues at the Hanford Site. On August 12, 2002, the U.S. Department of Energy (DOE) issued a Preliminary Notice of Violation (EA-2002-03) to Fluor Hanford, Inc for violations of 10 C.F.R. 830 associated with discrepancies in nondestructive assay data provided to another contractor

  8. WIPP Employee Inducted Into Mine Rescue Hall of Fame- WIPP Teams Recognized at National Competition

    Broader source: Energy.gov [DOE]

    CARLSBAD, N.M., August 2, 2013 - Long-time Waste Isolation Pilot Plant (WIPP) employee Gary Kessler was inducted into the Metal/Non-Metal National Mine Rescue Hall of Fame on Aug. 1, 2013 at the biennial mine rescue competition in Reno, Nevada.

  9. Treatment and prevention systems for acid mine drainage and halogenated contaminants

    DOE Patents [OSTI]

    Jin, Song (Fort Collins, CO); Fallgren, Paul H. (Laramie, WY); Morris, Jeffrey M. (Laramie, WY)

    2012-01-31

    Embodiments include treatments for acid mine drainage generation sources (10 perhaps by injection of at least one substrate (11) and biologically constructing a protective biofilm (13) on acid mine drainage generation source materials (14). Further embodiments include treatments for degradation of contaminated water environments (17) with substrates such as returned milk and the like.

  10. Coal mine wastes. (Latest citations from the NTIS database). Published Search

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    The bibliography contains citations concerning the characterization, environmental aspects, and engineering studies of coal mining refuse. Topics include disposal strategies, materials usage, and revegetation and reclamation programs. Appropriate legislation, and surveys performed at specific mining sites are also presented. Water pollution aspects of coal wastes are not covered in this report. (Contains 250 citations and includes a subject term index and title list.)

  11. Coal mine wastes. (Latest citations from the Selected Water Resources Abstracts database). Published Search

    SciTech Connect (OSTI)

    Not Available

    1994-05-01

    The bibliography contains citations concerning coal mining wastes, refuse dumps, and spoil. The disposal, environmental impact, waste treatment, utilization, and pollution control of these wastes are discussed. The revegetation of mined lands using waste water sludge is also considered. (Contains a minimum of 138 citations and includes a subject term index and title list.)

  12. Energy Use Loss and Opportunities Analysis: U.S. Manufacturing & Mining |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Use Loss and Opportunities Analysis: U.S. Manufacturing & Mining Energy Use Loss and Opportunities Analysis: U.S. Manufacturing & Mining PDF icon energy_use_loss_opportunities_analysis.pdf More Documents & Publications U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis Bandwidth Study U.S. Chemical Manufacturing MECS 2006 - Cement

  13. Colorado School of Mines: Spring 2016 Career Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Colorado School of Mines: Spring 2016 Career Day Colorado School of Mines: Spring 2016 Career Day February 9, 2016 11:00AM to 5:00PM EST 1500 Illinois Street, Golden, CO 80401 Website Link Contact Kimberly Chappell and/or

  14. S. 3168: A Bill to amend the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage, and for other purposes. Introduced in the Senate of the United States, August 11, 1992

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    This Act may be cited as the [open quotes]Acid Mine Drainage Abatement Act of 192[close quotes]. The purpose of this bill is to amend the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage, and for other purposes. The proposed amendments are listed.

  15. Mine demonstration of longwall dust control techniques: Final report

    SciTech Connect (OSTI)

    Pothini, B.R.

    1988-07-01

    This report represents the results of in-mine demonstration of three dust control techniques for controlling respirable dust levels on shearer-longwall faces. The techniques were: water infusion, foam spray and reverse shearer drum rotation. The mines in which tests were conducted were in Upper Freeport seam and Pocahontas No. 3 seam. Both gravimetric samplers and GCA RAM-1 real time dust monitors were used for dust surveys. Dust control technology was reviewed, pertinent techniques were selected, equipment was procured and demonstrated as part of the program. The results indicated that water infusion can be readily implemented, foam spray holds promise, but requires more work to be done, and reverse drum rotations effective in select conditions. The tests showed that reversing cutting drum rotation has brought several positive results: (1) lower dust levels; (2) lower methane liberations; (3) improved productivity and (4) less fines. Although the improvements were only in the 10% range, the costs except for the initial change of cutting drums are nil. Therefore this technique should further be tested in soft seams with thick binder rock and also in hard blocky seams. Such investigations may lead to universal application of reverse drum rotation in the industry for beneficial reductions in respirable dust levels at insignificant costs. 13 refs., 34 figs.

  16. Mining machine with cutter drums and sensing apparatus

    SciTech Connect (OSTI)

    Borowski, K.

    1980-02-19

    A drum cutter for a mining machine includes spaced-apart pick elements projecting radially therefrom and a disc forming part of a sensing apparatus disposed to follow a preceding one of the pick elements through rotational movement of the drum cutter. A disc is mounted by a pivot pin extending generally parallel with the rotational axis of the drum cutter. A sensor responds to the radial loading on the disc and produces a signal delivered to a controller for an actuator coupled to a pivot arm carrying the drum cutter. The disc is mounted to project radially about 10-20 millimeters beyond the radially-projected distance by a pick element. The sensor is a strain gage, a piezoelectric gage, an induction gage, a capacitive gage or a load cell. The sensor may be mounted within a hydraulically-power piston and cylinder assembly forming the actuator for the pivot arm. When a load cell is used, it filters out and detects pressure variations at peak magnitudes occurring as the disc penetrates the mine face with a rhythmic rotation for producing corresponding electric signals that are delivered to the controller for the pivot arm.

  17. USE of mine pool water for power plant cooling.

    SciTech Connect (OSTI)

    Veil, J. A.; Kupar, J. M .; Puder, M. G.

    2006-11-27

    Water and energy production issues intersect in numerous ways. Water is produced along with oil and gas, water runs off of or accumulates in coal mines, and water is needed to operate steam electric power plants and hydropower generating facilities. However, water and energy are often not in the proper balance. For example, even if water is available in sufficient quantities, it may not have the physical and chemical characteristics suitable for energy or other uses. This report provides preliminary information about an opportunity to reuse an overabundant water source--ground water accumulated in underground coal mines--for cooling and process water in electric generating facilities. The report was funded by the U.S. Department of Energy's (DOE's) National Energy Technology Laboratory (NETL), which has implemented a water/energy research program (Feeley and Ramezan 2003). Among the topics studied under that program is the availability and use of ''non-traditional sources'' of water for use at power plants. This report supports NETL's water/energy research program.

  18. A Study of SSI Effects Incorporating Seismic Wave Incoherence within the DOE Complex

    Broader source: Energy.gov [DOE]

    A Study of SSI Effects Incorporating Seismic Wave Incoherence within the DOE Complex 2014 U.S. DOE Natural Phenomena Hazards Meeting Carl J. Costantino and Associates www.cjcassoc.com

  19. A jewel in the desert: BHP Billiton's San Juan underground mine

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2007-12-15

    The Navajo Nation is America's largest native American tribe by population and acreage, and is blessed with large tracks of good coal deposits. BHP Billiton's New Mexico Coal Co. is the largest in the Navajo regeneration area. The holdings comprise the San Juan underground mine, the La Plata surface mine, now in reclamation, and the expanding Navajo surface mine. The article recounts the recent history of the mines. It stresses the emphasis on sensitivity to and helping to sustain tribal culture, and also on safety. San Juan's longwall system is unique to the nation. It started up as an automated system from the outset. Problems caused by hydrogen sulfide are being tackled. San Juan has a bleederless ventilation system to minimise the risk of spontaneous combustion of methane and the atmospheric conditions in the mine are heavily monitored, especially within the gob areas. 3 photos.

  20. Evaluation of remediation of coal mining wastewater by chitosan microspheres using biomarkers

    SciTech Connect (OSTI)

    Benassi, J.C.; Laus, R.; Geremias, R.; Lima, P.L.; Menezes, C.T.B.; Laranjeira, M.C.M.; Wilhelm, D.; Favere, V.T.; Pedrosa, R.C.

    2006-11-15

    The aim of this work was to evaluate the remediation of mining wastewater effluents by chitosan microspheres using biomarkers of exposure and effect. DNA damage (Comet assay) and several biomarkers of oxidative stress, such as lipoperoxidation levels (TBARS), superoxide dismutase (SOD), catalase (CAT), and glutathione S-transferase (GST) activities, and contents of reduced glutathione (GSH), were measured in blood and liver of tilapia (Oreochromis niloticus) exposed for 7, 15, and 30 days to dechlorinated tap water, 10% coal mining wastewater (CMW), and coal mining wastewater treated with chitosan microspheres (RCM). The results obtained indicated that the use of oxidative stress biomarkers were useful tools for the toxicity evaluation of coal mining effluents and also suggest that chitosan microspheres may be used as an alternative approach for remediation of coal mining wastewaters.

  1. Federal oversight of alternative bond systems under SMCRA (Surface Mining Control and Reclamation Act)

    SciTech Connect (OSTI)

    Beier, A.E.; McElfish, J.M. Jr.

    1989-01-01

    The 1977 Surface Mining Control and Reclamation Act (SMCRA) requires mine operators to post reclamation bonds before mining begins. The Federal Office of Surface Mining Reclamation and Enforcement (OSMRE) has approved alternative bond systems in seven states. These systems, rather than requiring bond amounts at the full cost of reclamation, require operators to submit only a flat rate, acreage specific bond. Additional reclamation costs should be covered by a supplemental fund composed generally of permit fees, taxes, or penalties. In many cases, alternative bond systems fail to ensure that funds will be available to reclaim coal mined land in the event of operator default, as required by SMCRA. OSMRE needs to take a more active role in oversight of existing state alternative bond systems to ensure that reclamation occurs.

  2. INTEGRATED POWER GENERATION SYSTEMS FOR COAL MINE WASTE METHANE UTILIZATION

    SciTech Connect (OSTI)

    Peet M. Soot; Dale R. Jesse; Michael E. Smith

    2005-08-01

    An integrated system to utilize the waste coal mine methane (CMM) at the Federal No. 2 Coal Mine in West Virginia was designed and built. The system includes power generation, using internal combustion engines, along with gas processing equipment to upgrade sub-quality waste methane to pipeline quality standards. The power generation has a nominal capacity of 1,200 kw and the gas processing system can treat about 1 million cubic feet per day (1 MMCFD) of gas. The gas processing is based on the Northwest Fuel Development, Inc. (NW Fuel) proprietary continuous pressure swing adsorption (CPSA) process that can remove nitrogen from CMM streams. The two major components of the integrated system are synergistic. The byproduct gas stream from the gas processing equipment can be used as fuel for the power generating equipment. In return, the power generating equipment provides the nominal power requirements of the gas processing equipment. This Phase III effort followed Phase I, which was comprised of a feasibility study for the project, and Phase II, where the final design for the commercial-scale demonstration was completed. The fact that NW Fuel is desirous of continuing to operate the equipment on a commercial basis provides the validation for having advanced the project through all of these phases. The limitation experienced by the project during Phase III was that the CMM available to operate the CPSA system on a commercial basis was not of sufficiently high quality. NW Fuel's CPSA process is limited in its applicability, requiring a relatively high quality of gas as the feed to the process. The CPSA process was demonstrated during Phase III for a limited time, during which the processing capabilities met the expected results, but the process was never capable of providing pipeline quality gas from the available low quality CMM. The NW Fuel CPSA process is a low-cost ''polishing unit'' capable of removing a few percent nitrogen. It was never intended to process CMM streams containing high levels of nitrogen, as is now the case at the Federal No.2 Mine. Even lacking the CPSA pipeline delivery demonstration, the project was successful in laying the groundwork for future commercial applications of the integrated system. This operation can still provide a guide for other coal mines which need options for utilization of their methane resources. The designed system can be used as a complete template, or individual components of the system can be segregated and utilized separately at other mines. The use of the CMM not only provides an energy fuel from an otherwise wasted resource, but it also yields an environmental benefit by reducing greenhouse gas emissions. The methane has twenty times the greenhouse effect as compared to carbon dioxide, which the combustion of the methane generates. The net greenhouse gas emission mitigation is substantial.

  3. Photo-induced hydrogen production in a helical peptide incorporating a

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    [FeFe] hydrogenase active site mimic Photo-induced hydrogen production in a helical peptide incorporating a [FeFe] hydrogenase active site mimic Authors: Roy, A., Madden, C., and Ghirlanda, G. Title: Photo-induced hydrogen production in a helical peptide incorporating a [FeFe] hydrogenase active site mimic Source: Chemical Communications Year: 2012 Volume: 48 Pages: 9816-9818 ABSTRACT: There is growing interest in the development of hydrogenase mimics for solar fuel production. Here, we

  4. Nickel(II) and Copper(I,II)-based Metal-Organic Frameworks Incorporating an

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Extended Trispyrazolate Linker | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Nickel(II) and Copper(I,II)-based Metal-Organic Frameworks Incorporating an Extended Trispyrazolate Linker Previous Next List Tabacaru, Aurel; Galli, Simona; Pettinari, Claudio; Masciocchi, Norberto; McDonald, Thomas M.; and Long, Jeffrey R. Nickel(II) and Copper(I,II)-based Metal-organic Frameworks Incorporating an Extended Trispyrazolate Linker. Cryst. Eng. Comm., 17,

  5. First QER Report Incorporates Tribal Input on U.S. Transmission System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Updates | Department of Energy First QER Report Incorporates Tribal Input on U.S. Transmission System Updates First QER Report Incorporates Tribal Input on U.S. Transmission System Updates April 23, 2015 - 1:16pm Addthis Affordable, clean, and secure energy and energy services are essential for improving U.S. economic productivity, enhancing quality of life, protecting the environment, and ensuring national security. To help the federal government meet these energy goals, President Obama

  6. Grid Integration and the Carrying Capacity of the U.S. Grid to Incorporate

    Energy Savers [EERE]

    Variable Renewable Energy | Department of Energy Grid Integration and the Carrying Capacity of the U.S. Grid to Incorporate Variable Renewable Energy Grid Integration and the Carrying Capacity of the U.S. Grid to Incorporate Variable Renewable Energy This report summarizes the challenges to integrating increasing amounts of variable renewable energy (RE), identifies emerging practices in power system planning and operation that can facilitate grid integration, and proposes a unifying

  7. Documentation of Hybrid Hydride Model for Incorporation into Moose-Bison

    Office of Environmental Management (EM)

    and Validation Strategy | Department of Energy Documentation of Hybrid Hydride Model for Incorporation into Moose-Bison and Validation Strategy Documentation of Hybrid Hydride Model for Incorporation into Moose-Bison and Validation Strategy This report documents the development, demonstration and validation of a mesoscale, microstructural evolution model for simulation of zirconium hydride d-ZrH1.5 precipitation in the cladding of used nuclear fuels that may occur during long-term dry

  8. Electron trap level of hydrogen incorporated nitrogen vacancies in silicon nitride

    SciTech Connect (OSTI)

    Sonoda, Ken'ichiro Tsukuda, Eiji; Tanizawa, Motoaki; Yamaguchi, Yasuo

    2015-03-14

    Hydrogen incorporation into nitrogen vacancies in silicon nitride and its effects on electron trap level are analyzed using simulation based on density functional theory with temperature- and pressure-dependent hydrogen chemical potential. If the silicon dangling bonds around a nitrogen vacancy are well separated each other, hydrogen incorporation is energetically stable up to 900?C, which is in agreement with the experimentally observed desorption temperature. On the other hand, if the dangling bonds strongly interact, the incorporation is energetically unfavorable even at room temperature because of steric hindrance. An electron trap level caused by a nitrogen vacancy becomes shallow by the hydrogen incorporation. An electron is trapped in a deep level created by a silicon dangling bond before hydrogen incorporation, whereas it is trapped in a shallow level created by an anti-bonding state of a silicon-silicon bond after hydrogen incorporation. The simulation results qualitatively explain the experiment, in which reduced hydrogen content in silicon nitride shows superior charge retention characteristics.

  9. ICM, Incorporated

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    innovations to refine terrestrial lignocellulosic biomass into fuel ethanol. The proposed process furthers the cost effective production of ethanol from lignocellulosic biomass....

  10. Assessment of the single-pass thick-seam longwall mining method. Final report

    SciTech Connect (OSTI)

    Adam, R.F.J.; Douglas, W.J.

    1982-04-01

    The objectives of the project are a review of the foreign experiences in longwall mining of thick seams, an evaluation of the US thick seam reserves, a mine design, equipment specifications, and an economic study for longwall mining in a single pass up to 16 feet in US conditions. The review of foreign experience shows a steady increase in the maximum height of extraction with several examples in the range of 13 to 15 feet. Longwall face equipment is available up to an 18 feet height of extraction, based upon shields support and shearer loader. There are important reserves of thick coal seams which can be mined by a longwall in a single pass (125 billion tons). In US conditions, a retreating face with a 16 foot height of extraction and a double entry system, driven 10 feet high, are proposed. The face stability can be improved by using a two bench face cut in good geological conditions. The economic study compares longwall mining with the room-and-pillar method. Longwall mining 16 feet high coal in a single pass can compete advantageously with room-and-pillar mining. 74 figures, 14 tables.

  11. Livestock grazing for management of reclaimed land at Navajo Mine: Animal response

    SciTech Connect (OSTI)

    Gamble, D.C.; Gadzia, K.L.; Raisbeck, M.F.

    1997-12-31

    Livestock responses dining grazing of reclaimed land were monitored at the Navajo Mine since 1994. The Navajo Mine Grazing Management Program (GNP) began in 1991 to prepare for bond release and return of reclaimed land to the Navajo Nation by demonstrating the ability of the land to sustain the post-mining land use of livestock grazing. Local Navajos, whose livestock are used in the GMP, are interested in the ability of the land to sustain their livestock. Sustainable livestock grazing implies the ability of animals to thrive, successfully reproduce and maintain the health of the land. Daily care and monitoring of livestock health was carried out by herders hired by the mining company. General animal health parameters including blood selenium levels were monitored quarterly. Livestock responses to grazing reclaimed land have been largely positive. Cows have produced healthy offspring and owners indicate satisfaction with calf size, and overall performance of the cows. Selenium and other blood testing parameters indicate no adverse effect on animal health to date. Hazards associated with reclamation and ongoing mining activities are important considerations for lands being reclaimed for livestock grazing as a post-mining land use and must be monitored carefully during any grazing program. Preliminary results indicate that planned grazing by cattle on reclaimed land at Navajo Mine is feasible and does not adversely affect animal health.

  12. LLNL`s partnership with selected US mines, for CTBT verification: A pictorial and some reflections

    SciTech Connect (OSTI)

    Heuze, F.E.

    1996-01-01

    The verification of an upcoming Comprehensive Test Ban Treaty (CTBT) will involve seismic monitoring and will provide for on-site inspections which may include drilling. Because of the fact that mining operations can send out strong seismic signals, many mining districts in the US and abroad may come under special scrutiny. The seismic signals can be generated by the use of large quantities of conventional explosives, by the collapse of underground workings, or by sudden energy release in the ground such as in rock bursts and coal bumps. These mining activities may be the cause of false alarms, but may also offer opportunities for evasive nuclear testing. So in preparing for future verification of a CTBT it becomes important to address the mining-related questions. For the United States, these are questions to be answered with respect to foreign mines. But there is a good amount of commonality in mining methods worldwide. Studies conducted at US mine sites can provide good analogs of activities that may be carried out for overseas CTBT verification, save for the expected logistical impediments.

  13. Mining Behavior Based Safety Data to Predict Safety Performance

    SciTech Connect (OSTI)

    Jeffrey C. Joe

    2010-06-01

    The Idaho National Laboratory (INL) operates a behavior based safety program called Safety Observations Achieve Results (SOAR). This peer-to-peer observation program encourages employees to perform in-field observations of each other's work practices and habits (i.e., behaviors). The underlying premise of conducting these observations is that more serious accidents are prevented from occurring because lower level at risk behaviors are identified and corrected before they can propagate into culturally accepted unsafe behaviors that result in injuries or fatalities. Although the approach increases employee involvement in safety, the premise of the program has not been subject to sufficient empirical evaluation. The INL now has a significant amount of SOAR data on these lower level at risk behaviors. This paper describes the use of data mining techniques to analyze these data to determine whether they can predict if and when a more serious accident will occur.

  14. Mining Large Heterogeneous Graphs using Cray s Urika

    SciTech Connect (OSTI)

    Sukumar, Sreenivas R; Bond, Nathaniel A

    2013-01-01

    Pattern discovery and predictive modeling from seemingly related Big Data represented as massive, ad-hoc, heterogeneous networks (e.g., extremely large graphs with complex, possibly unknown structure) is an outstanding problem in many application domains. To address this problem, we are designing graph-mining algorithms capable of discovering relationship-patterns from such data and using those discovered patterns as features for classification and predictive modeling. Specifically, we are: (i) exploring statistical properties, mechanics and generative models of behavior patterns in heterogeneous information networks, (ii) developing novel, automated and scalable graph-pattern discovery algorithms and (iii) applying our relationship-analytics (data science + network science) expertise to domains spanning healthcare to homeland security.

  15. S. 276: A Bill to amend the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage, and for other purposes. Introduced in the Senate of the United States, One Hundred Third Congress, First Session, February 2, 1993

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    This bill amends the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage. State use of funds is addressed.

  16. Respirable dust control on longwall mining operations in the United States

    SciTech Connect (OSTI)

    Mundell, R.L.; Jankowski, R.A.; Ondrey, R.S.; Tomb, T.F.

    1984-01-01

    Between 1967 and 1978 use of longwall methods to mine coal in the United States continually increased. Although these methods offer several advantages, health hazards often exist because of unique and difficult problems in the control of respirable dust. This paper discusses the results of respirable dust studies conducted on United States longwall mining operations in 1972 and 1978. Prevalent engineering control methods (ventilation, water application and use of machine cutting parameters) and administrative controls for minimizing employees' respirable dust exposure are discussed. Current research efforts for the control of respirable dust on longwall mining operations are reviewed. 21 figs.

  17. Text and Structural Data Mining of Influenza Mentions in Web and Social Media

    SciTech Connect (OSTI)

    Corley, Courtney D.; Cook, Diane; Mikler, Armin R.; Singh, Karan P.

    2010-02-22

    Text and structural data mining of Web and social media (WSM) provides a novel disease surveillance resource and can identify online communities for targeted public health communications (PHC) to assure wide dissemination of pertinent information. WSM that mention influenza are harvested over a 24-week period, 5-October-2008 to 21-March-2009. Link analysis reveals communities for targeted PHC. Text mining is shown to identify trends in flu posts that correlate to real-world influenza-like-illness patient report data. We also bring to bear a graph-based data mining technique to detect anomalies among flu blogs connected by publisher type, links, and user-tags.

  18. New Forces at Work in Mining: Industry View of Critical Technologies

    SciTech Connect (OSTI)

    Peterson, D. J.; LaTourrette, Tom; Bartis, James T.

    2007-04-01

    RAND has just published a report entitled, "New Forces at Work in Mining: Industry Views of Critical Technologies," by D. J. Peterson, Tom LaTourrette, and James T. Bartis. The report presents the results of a series of in-depth discussions with leading mining industry representatives selected for their prominent position and their ability to think broadly about technology trends. The discussions highlighted the importance of collaborative technology research, development, and implementation strategies and the increasingly critical role of mine personnel in the utilization of new technologies.

  19. DOE - Office of Legacy Management -- Union Mines Development Corp - NY 0-22

    Office of Legacy Management (LM)

    Mines Development Corp - NY 0-22 FUSRAP Considered Sites Site: UNION MINES DEVELOPMENT CORP. (NY.0-22) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Union Carbide NY.0-22-1 Location: New York , New York NY.0-22-1 Evaluation Year: 1987 NY.0-22-1 Site Operations: The company owned uranium mines or reserves located in the western U.S. NY.0-22-1 Site Disposition: Eliminated - No reason to believe radioactive material was used at this site NY.0-22-1

  20. H. R. 4804: A bill to amend titles I, II, IV and V of the Surface Mining Control and Reclamation Act of 1977, and to add a new title X, to encourage the remining and reclamation of abandoned mined lands by active mining operations, and for other purposes. Introduced in the House of Representatives, One Hundredth Congress, Second Session, June 14, 1988

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    Surface coal mining operations can be effective in the reclamation of abandoned mined lands and are being encouraged by the amendments to the existing Surface Mining Control and Reclamation Act of 1977. The new section X - Remining spells out the authority of the Secretary of the Interior to enter into agreements with mining companies to use excess spoil from an active surface mine to reclaim an abandoned site, to develop a bond guarantee program whereby the operators may be compensated with reclamation bond credits for up to 80% of the reclamation costs incurred, and to make funds available on a matching basis to states or tribes to collect certain geologic and hydrologic data for watersheds or regions adversely affected by past coal mining abuses for the use of regulatory authorities to assist applicants for surface mining permits within such areas.

  1. Incorporation of memory effects in coarse-grained modeling via the

    Office of Scientific and Technical Information (OSTI)

    Mori-Zwanzig formalism (Journal Article) | DOE PAGES Incorporation of memory effects in coarse-grained modeling via the Mori-Zwanzig formalism This content will become publicly available on November 13, 2016 « Prev Next » Title: Incorporation of memory effects in coarse-grained modeling via the Mori-Zwanzig formalism Authors: Li, Zhen [1] Search DOE PAGES for author "Li, Zhen" Search DOE PAGES for ORCID "0000000209366928" Search orcid.org for ORCID

  2. Incorporation of Catalytic Compounds in the Porosity of SiC Wall Flow

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Filters - 4 Way Catalyst and DeNOx Application examples | Department of Energy Incorporation of Catalytic Compounds in the Porosity of SiC Wall Flow Filters - 4 Way Catalyst and DeNOx Application examples Incorporation of Catalytic Compounds in the Porosity of SiC Wall Flow Filters - 4 Way Catalyst and DeNOx Application examples 2007 Diesel Engine-Efficiency & Emissions Research Conference (DEER 2007). 13-16 August, 2007, Detroit, Michigan. Sponsored by the U.S. Department of Energy's

  3. Design and synthesis of nucleobase-incorporated metal-organic materials |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Design and synthesis of nucleobase-incorporated metal-organic materials Previous Next List Muwei Zhang, Weigang Lu, Jian-Rong Li, Mathieu Bosch, Ying-Pin Chen, Tian-Fu Liu, Yangyang Liu and Hong-Cai Zhou, Inorg. Chem. Front., 1, 159-162 (2014) DOI: 10.1039/C3QI00042G GA Abstract: Two nucleobase-incorporated metal-organic materials were designed, synthesized and structurally characterized. PCN-530 is among the

  4. Tips and Tricks of Incorporating Industry Standards into a Library Collection

    SciTech Connect (OSTI)

    Abbott, Jennifer; Sandberg, Tami

    2015-11-05

    Professional literature on the incorporation of industry standards into a library collection is somewhat limited. The objective of this presentation is to discuss the intricate details of acquiring, managing, and delivering electronic industry standards to library patrons in a seamless manner. Lessons learned regarding vendor selection and license agreements will also be discussed. Results from a survey administer at the National Renewable Energy Laboratory will be used to analyze how collection policies can properly be developed to incorporate industry standards into a library setting. The key points of acquisition decisions, avoidance of liability issues, and cost will be addressed.

  5. Pre-operational survey of a U mine near Val Vedello, Italy

    SciTech Connect (OSTI)

    Fenzi, A.

    1986-08-01

    Results obtained from radiometric research carried out from 1980-81 in the region of U mines in the Val Vedello are provided. Data are presented on /sup 2/)2''/sup 2/Rn, /sup 226/Ra and natural U concentrations in spring and surface waters. Concentrations were found to be relatively low. There is some increase in the vicinity of the exploratory U mine but this is, at least up to the present, only of a local character. Data are presented on external gamma exposure, /sup 210/Pb and /sup 210/Po in foodstuffs and in the urine of normal and exposed population as well as /sup 226/Ra in milk and vegetable samples. The aim of this study is to outline a preliminary map of natural radioactivity on the site before starting the mining activity. This will enable us later to detect changes caused by the U mining, milling and mill-tailing disposal operations.

  6. EIA new releases: EIA examines the growing importance of longwall mining

    SciTech Connect (OSTI)

    1995-05-17

    This publication disseminates information on progress in various DOE research areas. This issues contains information on Longwall mining; electric fleet utility survey; electronic publishing system; other publications of the EIA; and places from which to purchase publications.

  7. EIS-0010: Strategic Petroleum Reserves, Sulphur Mines Salt Dome, Calcasieu Parish, Louisiana

    Broader source: Energy.gov [DOE]

    The Strategic Petroleum Reserves prepared this EIS to assess the environmental impacts of the proposed storage of 24 million barrels of crude oil at the Sulphur Mines salt dome located in Calcasieu Parish, Louisiana, including construction and operation impacts.

  8. DOE Submits Its Defense-Related Uranium Mines Report to Congress

    Broader source: Energy.gov [DOE]

    Dr. Ernest Moniz, the U.S. Secretary of Energy, submitted the U.S. Department of Energy (DOE) Defense-Related Uranium Mines Report to Congress on September 2, 2014. Section 3151 of the National...

  9. Characterization of seven United States coal regions. The development of optimal terrace pit coal mining systems

    SciTech Connect (OSTI)

    Wimer, R.L.; Adams, M.A.; Jurich, D.M.

    1981-02-01

    This report characterizes seven United State coal regions in the Northern Great Plains, Rocky Mountain, Interior, and Gulf Coast coal provinces. Descriptions include those of the Fort Union, Powder River, Green River, Four Corners, Lower Missouri, Illinois Basin, and Texas Gulf coal resource regions. The resource characterizations describe geologic, geographic, hydrologic, environmental and climatological conditions of each region, coal ranks and qualities, extent of reserves, reclamation requirements, and current mining activities. The report was compiled as a basis for the development of hypothetical coal mining situations for comparison of conventional and terrace pit surface mining methods, under contract to the Department of Energy, Contract No. DE-AC01-79ET10023, entitled The Development of Optimal Terrace Pit Coal Mining Systems.

  10. Nevada Bureau of Mines and Geology Open-File Report 12-3: Data...

    Open Energy Info (EERE)

    2012 Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Nevada Bureau of Mines and Geology Open-File Report 12-3: Data Tables and graphs of geothermal power...

  11. Legacy Management Work Progresses on Defense-Related Uranium Mines Report to Congress

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy Office of Legacy Management (LM) continues to work on a report to Congress regarding defense-related legacy uranium mines. LM was directed by the U.S. Congress in the...

  12. Estimated use of explosives in the mining industries of Algeria, Iran, Iraq, and Libya

    SciTech Connect (OSTI)

    Wilburn, D.R.; Russell, J.A.; Bleiwas, D.I.

    1995-09-01

    This work was performed under Memorandum of Agreement B291534 Between the Lawrence Livermore National Laboratory (LLNL) and the United States Bureau of Mines. The Bureau of Mines authors are members of the Minerals Availability Field Office (MAFO) in Denver, CO, which uses an extensive network of information sources to develop and maintain the Minerals Availability database concerning mining and minerals properties worldwide. This study was initiated and directed by F. Heuze at LLNL. A previous study on the same subject had been commissioned by LLNL from the Mining Journal Research Services (MJRS) in London ,UK. Its results were integrated into this report. MJRS is shown as one of the numerous sources which were used for this work. All sources are listed in the report. This document is arranged in four sections, one for each country, in alphabetical order. Thie outline is the same for each country.

  13. 31 TAC, part 4, chapter 155, rule 155.42 Mining Leases on Properties...

    Open Energy Info (EERE)

    2 Mining Leases on Properties Subject to Prospect Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 31 TAC, part 4, chapter...

  14. Cost analysis of aerial photographic and satellite imagery for monitoring mined land reclamation

    SciTech Connect (OSTI)

    Green, J.E.; Buschur, J.P.

    1980-12-01

    Five sections of the Surface Mining Control and Reclamation Act of 1977 require information that is easily and efficiently obtainable by aerial photographic and remote sensing methods. Most states in which mining is important and to which the Act most specifically applies, maintain or have available to them aerial photographic or remotely sensed information of the type required. This information could be used to meet the requirements of the Act which call for monitoring reclamation progress, identifying land areas unsuitable for mining and determining land use prior to mining to name a few examples. At the regional scale, LANDSAT imagery of a scale of 1:250,000 provides a good combination of aerial coverage and detail for regional problem solving. At the local scale, such coverage as is provided by the Agricultural Stabilization and Conservation Service through their aerial observation method of compliance technique can supply local, detailed information to meet site specific needs.

  15. Microsoft Word - DOE-ID-11-007 Colorado Mines EC.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 SECTION A. Project Title: Imaging Upgrades for the Colorado School of Mines Nuclear Science and Engineering Program - Colorado School of Mines SECTION B. Project Description This project has three objectives: 1. Upgrade the Transmission Electron Microscope in the Active Materials Characterization Laboratory (ActMCL) with a digital imaging system 2. Upgrade the ActMCL and Nuclear Fuel Development Lab (NFDL) with modern radiation detection and measurement equipment, for both research and

  16. Microsoft Word - DOE-ID-12-013 Colorado School of Mines.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: Automated Serial Sectioning and Imaging in Support of Nuclear Materials Analysis - Colorado School of Mines SECTION B. Project Description The Colorado School of Mines will purchase a Robo-Met.3D automated polishing, serial-sectioning, and image acquisition station. The automated serial sectioning and imaging capabilities of the new system will expand the digital microstructure imaging and tomographic capabilities, allowing for the acquisition of micrometer scale 3-D

  17. Conversion of Coal Mine Gas to LNG (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Conversion of Coal Mine Gas to LNG Citation Details In-Document Search Title: Conversion of Coal Mine Gas to LNG This project evolved from a 1995, DOE-NETL competitive solicitation for practical CMM capture and utilization concepts. Appalachian Pacific was one of three companies selected to proceed with the construction and operation of a cost-shared demonstration plant. In the course of trying to proceed with this demonstration plant, AP examined several liquefaction technologies, discussed

  18. DEVELOPMENT OF A COMPREHENSIVE WIRELESS COMMUNICATIONS SYSTEM FOR THE UNDERGROUND MINING INDUSTRY

    SciTech Connect (OSTI)

    Zvi H. Meiksin

    2001-04-01

    Progress continued along both subsystems towards an integrated comprehensive wireless communications system for the underground mining industry. Designing an automated continuous self-tuning mechanism that optimizes signal transmission intensity for a given power input enhanced through-the-earth communications. In-mine communications was enhanced through the design of a circuit that eliminates multi-antenna interference, cleaning-up the received signal.

  19. U.S. Energy Deputy Secretary Poneman, Brazil's Deputy Minister of Mines

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Energy Zimmermann Sign Advance Bilateral Energy Relationship | Department of Energy Deputy Secretary Poneman, Brazil's Deputy Minister of Mines and Energy Zimmermann Sign Advance Bilateral Energy Relationship U.S. Energy Deputy Secretary Poneman, Brazil's Deputy Minister of Mines and Energy Zimmermann Sign Advance Bilateral Energy Relationship March 20, 2013 - 4:34pm Addthis NEWS MEDIA CONTACT (202) 586-4940 JOINT STATEMENT Brasilia, Brazil - U.S. Energy Deputy Secretary Daniel Poneman

  20. DOE - Office of Legacy Management -- Colorado School of Mines - CO 01

    Office of Legacy Management (LM)

    School of Mines - CO 01 FUSRAP Considered Sites Site: Colorado School of Mines ( CO.01 ) Eliminated from consideration under FUSRAP - Licensed operation Designated Name: Not Designated Alternate Name: None Location: Golden , Colorado CO.01-1 Evaluation Year: 1987 CO.01-1 CO.01-2 Site Operations: Research and Development on testing and processing of uranium ores. CO.01-3 Site Disposition: Eliminated - No Authority - Engaged in state licensed operations CO.01-1 CO.01-2 Radioactive Materials

  1. Site-specific incorporation of redox active amino acids into proteins

    DOE Patents [OSTI]

    Alfonta; Lital (San Diego, CA), Schultz; Peter G. (La Jolla, CA), Zhang; Zhiwen (San Diego, CA)

    2010-10-12

    Compositions and methods of producing components of protein biosynthetic machinery that include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, and orthogonal pairs of tRNAs/synthetases, which incorporate redox active amino acids into proteins are provided. Methods for identifying these orthogonal pairs are also provided along with methods of producing proteins with redox active amino acids using these orthogonal pairs.

  2. Site-specific incorporation of redox active amino acids into proteins

    DOE Patents [OSTI]

    Alfonta, Lital (San Diego, CA); Schultz, Peter G. (La Jolla, CA); Zhang, Zhiwen (San Diego, CA)

    2012-02-14

    Compositions and methods of producing components of protein biosynthetic machinery that include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, and orthogonal pairs of tRNAs/synthetases, which incorporate redox active amino acids into proteins are provided. Methods for identifying these orthogonal pairs are also provided along with methods of producing proteins with redox active amino acids using these orthogonal pairs.

  3. Site-specific incorporation of redox active amino acids into proteins

    DOE Patents [OSTI]

    Alfonta, Lital (San Diego, CA); Schultz, Peter G. (La Jolla, CA); Zhang, Zhiwen (San Diego, CA)

    2009-02-24

    Compositions and methods of producing components of protein biosynthetic machinery that include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, and orthogonal pairs of tRNAs/synthetases, which incorporate redox active amino acids into proteins are provided. Methods for identifying these orthogonal pairs are also provided along with methods of producing proteins with redox active amino acids using these orthogonal pairs.

  4. Site-specific incorporation of redox active amino acids into proteins

    DOE Patents [OSTI]

    Alfonta, Lital (San Diego, CA); Schultz, Peter G. (La Jolla, CA); Zhang, Zhiwen (Austin, TX)

    2011-08-30

    Compositions and methods of producing components of protein biosynthetic machinery that include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, and orthogonal pairs of tRNAs/synthetases, which incorporate redox active amino acids into proteins are provided. Methods for identifying these orthogonal pairs are also provided along with methods of producing proteins with redox active amino acids using these orthogonal pairs.

  5. Assessing Fossil and New Carbon in Reclaimed Mined Soils

    SciTech Connect (OSTI)

    Rattan Lal; David Ussiri

    2008-09-30

    Soil organic carbon (SOC) pool in the reclaimed minesoils (RMS) is the mixture of coal C originating from mining and reclamation activities and recent plant-derived organic carbon (OC). Accurate estimates of OC pools and sequestration rates in the RMS are limited by lack of standard and cost-effective method for determination of coal-C concentration. The main objective of this project was to develop and test analytical procedures for quantifying pool sizes of coal-derived C in RMS and to partition organic C in RMS into coal-derived and newly deposited SOC fractions. Analysis of soil and coal artificial mixtures indicated that the {Delta}{sup 13}C method developed was very effective in estimating coal C added in the mixtures, especially soils under C4 plants. However, most of the reclaimed sites in Ohio are under C3 plants with range of {Delta}{sup 13}C signal falling within ranges of coal. The wide range of {Delta}{sup 13}C signal observed in minesoils, (i.e. -26 to -30 for plants and -23 to -26 for coal) limits the ability of this approach to be used for southeast Ohio minesoils. This method is applicable for reclaimed prime farm land under long term corn or corn soybean rotation. Chemi-thermal method was very effective in quantifying coal-C fraction in both soil-coal artificial mixtures and minesoils. The recovery of coal-C from the mixture ranged from 93 to 100% of coal. Cross-validation of chemi-thermal method with radiocarbon analysis revealed that chemi-thermal method was as effective as radiocarbon analysis in quantifying coal-C in RMS. Coal C determined after chemi-thermal treatment of samples was highly correlated with coal C concentration calculated by radiocarbon activity (r{sup 2} = 0.95, P < 0.01). Therefore, both radiocarbon activity and chemi-thermal method were effective in estimating coal carbon concentration in reclaimed minesoils of southeast Ohio. Overall, both coal-C and recent OC fraction exhibited high spatial and depth variation, suggesting that approaches used to obtain representative samples in undisturbed soils may not be effective in RMS sites. Analysis of coal-C fraction in RMS indicated that the contribution of coal C to SOC increased with increase in soil depth, accounting for up to 92% of SOC in the sub-soil. Our data indicated that land use and land management practices plays significant role in enhancing SOC sequestration in reclaimed mined lands.

  6. Electricity and technical progress: The bituminous coal mining industry, mechanization to automation

    SciTech Connect (OSTI)

    Devine, W.D. Jr.

    1987-07-01

    Development and use of electric mobile machinery facilitated the mechanization of underground bituminous coal mining and has played a lesser but important role in the growth of surface mining. Electricity has been central to the rise of mechanically integrated mining, both underground (after 1950) and on the surface (recently). Increasing labor productivity in coal mining and decreasing total energy use per ton of coal mined are associated with penetration of new electric technology through at least 1967. Productivity declined and energy intensity increased during the 1970s due in part to government regulations. Recent productivity gains stem partly from new technology that permits automation of certain mining operations. On most big electric excavating machines, a pair of large alternating current (ac) motors operate continuously at full speed. These drive direct current (dc) generators that energize dc motors, each matched to the desired power and speed range of a particular machine function. Direct-current motors provide high torque at low speeds, thus reducing the amount of gearing required; each crawler is independently propelled forward or backward by its own variable-speed dc motors. The principal advantages of electric power are that mechanical power-transmission systems - shafts, gears, etc. - are eliminated or greatly simplified. Reliability is higher, lifetime is longer, and maintenance is much simpler with electric power than with diesel power, and the spare parts inventory is considerably smaller. 100 refs., 11 figs., 12 tabs.

  7. Methodology for tomographic imaging ahead of mining using the shearer as a seismic source

    SciTech Connect (OSTI)

    King, A.; Luo, X.

    2009-03-15

    Poor rock conditions in a coal long wall panel can result in roof collapse when a problematic zone is mined, significantly interrupting mine production. The ability to image rock conditions (stress and degree of fracturing) ahead of the face gives the miners the ability to respond proactively to such problems. This method uses the energy from mining machinery, in this case a coal shearer, to produce an image of the rock velocity ahead of the mining face without interrupting mining. Data from an experiment illustrates the concept. Geophones installed in gate-road roofs record the noise generated by the shearer after it has traversed the panel ahead of the mining face. A generalized crosscorrelation of the signals from pairs of sensors determines relative arrival times from the continuous seismic noise produced by the shearer. These relative times can then be inverted for a velocity structure. The crosscorrelations, performed in the frequency domain, are weighted by a confidence value derived from the spectral coherence between the traces. This produces stable crosscorrelation lags in the presence of noise. The errors in the time-domain data are propagated through to the relative traveltimes and then to the final tomographic velocity image, yielding an estimate of the uncertainty in velocity at each point. This velocity image can then be used to infer information about the stress and fracture state of the rock, providing advance warning of potentially hazardous zones.

  8. Knowledge Discovery and Data Mining (KDDM) survey report.

    SciTech Connect (OSTI)

    Phillips, Laurence R.; Jordan, Danyelle N.; Bauer, Travis L.; Elmore, Mark T.; Treadwell, Jim N.; Homan, Rossitza A.; Chapman, Leon Darrel; Spires, Shannon V.

    2005-02-01

    The large number of government and industry activities supporting the Unit of Action (UA), with attendant documents, reports and briefings, can overwhelm decision-makers with an overabundance of information that hampers the ability to make quick decisions often resulting in a form of gridlock. In particular, the large and rapidly increasing amounts of data and data formats stored on UA Advanced Collaborative Environment (ACE) servers has led to the realization that it has become impractical and even impossible to perform manual analysis leading to timely decisions. UA Program Management (PM UA) has recognized the need to implement a Decision Support System (DSS) on UA ACE. The objective of this document is to research the commercial Knowledge Discovery and Data Mining (KDDM) market and publish the results in a survey. Furthermore, a ranking mechanism based on UA ACE-specific criteria has been developed and applied to a representative set of commercially available KDDM solutions. In addition, an overview of four R&D areas identified as critical to the implementation of DSS on ACE is provided. Finally, a comprehensive database containing detailed information on surveyed KDDM tools has been developed and is available upon customer request.

  9. Automated genome mining of ribosomal peptide natural products

    SciTech Connect (OSTI)

    Mohimani, Hosein; Kersten, Roland; Liu, Wei; Wang, Mingxun; Purvine, Samuel O.; Wu, Si; Brewer, Heather M.; Pasa-Tolic, Ljiljana; Bandeira, Nuno; Moore, Bradley S.; Pevzner, Pavel A.; Dorrestein, Pieter C.

    2014-07-31

    Ribosomally synthesized and posttranslationally modified peptides (RiPPs), especially from microbial sources, are a large group of bioactive natural products that are a promising source of new (bio)chemistry and bioactivity (1). In light of exponentially increasing microbial genome databases and improved mass spectrometry (MS)-based metabolomic platforms, there is a need for computational tools that connect natural product genotypes predicted from microbial genome sequences with their corresponding chemotypes from metabolomic datasets. Here, we introduce RiPPquest, a tandem mass spectrometry database search tool for identification of microbial RiPPs and apply it for lanthipeptide discovery. RiPPquest uses genomics to limit search space to the vicinity of RiPP biosynthetic genes and proteomics to analyze extensive peptide modifications and compute p-values of peptide-spectrum matches (PSMs). We highlight RiPPquest by connection of multiple RiPPs from extracts of Streptomyces to their gene clusters and by the discovery of a new class III lanthipeptide, informatipeptin, from Streptomyces viridochromogenes DSM 40736 as the first natural product to be identified in an automated fashion by genome mining. The presented tool is available at cy-clo.ucsd.edu.

  10. CX-007787: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Line Relocation Project for Farrell Cooper Mining Company CX(s) Applied: B4.13 Date: 01/04/2012 Location(s): Oklahoma Offices(s): Southwestern Power Administration

  11. CX-010897: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Data Mining and Playback of Hybrid Synchrophasor Data for Research and Education CX(s) Applied: A9 Date: 06/27/2013 Location(s): Virginia Offices(s): National Energy Technology Laboratory

  12. CX-010642: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Data Mining and Playback of Hybrid Synchrophasor Data for Research and Education CX(s) Applied: A9 Date: 06/27/2013 Location(s): Virginia Offices(s): National Energy Technology Laboratory

  13. CX-011787: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Development and Validation of an Acid Mine Drainage Treatment Process for Source Water CX(s) Applied: B3.6 Date: 02/14/2014 Location(s): Ohio Offices(s): National Energy Technology Laboratory

  14. CX-011782: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Development and Validation of an Acid Mine Drainage Treatment Process for Source Water CX(s) Applied: B3.6 Date: 02/19/2014 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  15. CX-008752: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Upgrades to the Colorado School of Mines Neutron Imaging Beam-Line CX(s) Applied: B3.6 Date: 05/17/2012 Location(s): Idaho Offices(s): Idaho Operations Office

  16. CX-012672: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Controlling Hexavalent Americium A Centerpiece to a Compact Nuclear Fuel Cycle Colorado School of Mines CX(s) Applied: B3.6Date: 41872 Location(s): ColoradoOffices(s): Nuclear Energy

  17. CX-008748: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Automated Serial Sectioning and Imaging in Support of Nuclear Materials Analysis – Colorado School of Mines CX(s) Applied: B3.6 Date: 05/21/2012 Location(s): Idaho Offices(s): Idaho Operations Office

  18. The variable wall mining machine. Third quarterly technical report, April 1, 1994--June 30, 1994

    SciTech Connect (OSTI)

    Not Available

    1994-08-20

    This is the Third Technical Report to develop the Variable Wall Mining Machine(VWM), a patented mining system that has the potential of greatly improving the underground mining of coal and other flat-lying mineral beds by providing a greater safety for workers, a healthier human environment, and a higher productivity. One of the thrusts of this project is to analyze the adaptation of the VWM system to a dual duct ventilation system which separates the air for human breathing from the air which becomes contaminated from dust and dangerous gases. In conventional practice there is one zone in an underground working section where workers breathe the air used to carry away gases and dust. A proposed dual duct system divides the single zone into two zones: one for cutting and fragmentation and one for worker occupancy. It is both technically and economically impossible to ventilate longwall face with the conventional method when methane emission rate is higher than 1,500 cfM. The only available option to the methane problem is to pre-drain the methane before mining so the methane emission rate will be lower later during longwall mining. But it is questionable that enough methane can be predrained to significantly erase the explosibility problem. Contrariwise, the dual-duct gas control method requires significantly less ventilating air, resulting in large savings in fans, air course construction, and energy. The overall costs are measurably less. Since the cutting chamber is sealed, the dust and methane are extracted from the mine in a separate ventilation system at a speed which is independent of the general mine ventilation system.

  19. Design procedures for coal mine tunnels. Open file report 1 Oct 79-31 Dec 82 (final)

    SciTech Connect (OSTI)

    Bieniawski, Z.T.

    1983-03-31

    Although coal mine tunnels such as the main haulageways or roadways are the lifelines of coal mines, little attention has been paid to them in the United States in terms of preconstruction planning and design. This report summarizes the results of a 3-year research project aimed at improving the design procedures for coal mine tunnels. A new design approach was developed for this purpose and roof-support design charts were prepared for mine tunnels and their intersections. Analytical studies, 'base friction' model experiments, and in situ rock stress measurements were performed during this research.

  20. Barrier-free subsurface incorporation of 3d metal atoms into Bi(111) films

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Klein, C.; Vollmers, N. J.; Gerstmann, U.; Zahl, P.; Lukermann, D.; Jnawali, G.; Pfnur, H.; Sutter, P.; Tegenkamp, C.; Schmidt, W. G.; et al

    2015-05-27

    By combining scanning tunneling microscopy with density functional theory it is shown that the Bi(111) surface provides a well-defined incorporation site in the first bilayer that traps highly coordinating atoms such as transition metals (TMs) or noble metals. All deposited atoms assume exactly the same specific sevenfold coordinated subsurface interstitial site while the surface topography remains nearly unchanged. Notably, 3d TMs show a barrier-free incorporation. The observed surface modification by barrier-free subsorption helps to suppress aggregation in clusters. Thus, it allows a tuning of the electronic properties not only for the pure Bi(111) surface, but may also be observed formore » topological insulators formed by substrate-stabilized Bi bilayers.« less

  1. One-Piece Battery Incorporating A Circulating Fluid Type Heat Exchanger

    DOE Patents [OSTI]

    Verhoog, Roelof (Bordeaux, FR)

    2001-10-02

    A one-piece battery comprises a tank divided into cells each receiving an electrode assembly, closure means for the tank and a circulating fluid type heat exchanger facing the relatively larger faces of the electrode assembly. The fluid flows in a compartment defined by two flanges which incorporate a fluid inlet orifice communicating with a common inlet manifold and a fluid outlet orifice communicating with a common outlet manifold. The tank comprises at least two units and each unit comprises at least one cell delimited by walls. The wall facing a relatively larger face of the electrode assembly constitutes one of the flanges. Each unit further incorporates a portion of an inlet and outlet manifold. The units are fastened together so that the flanges when placed face-to-face form a sealed circulation compartment and the portions of the same manifold are aligned with each other.

  2. Formation and incorporation of SiF{sub 4} molecules in F-implanted preamorphized Si

    SciTech Connect (OSTI)

    De Salvador, D.; Bisognin, G.; Napolitani, E.; Mastromatteo, M.; Baggio, N.; Carnera, A.; Boscherini, F.; Cristiano, F.

    2009-09-07

    The local structure of fluorine incorporated in crystalline silicon following solid phase epitaxial regrowth was investigated by means of x-ray absorption spectroscopy at the F K-edge. We clearly demonstrate that most F is found in SiF{sub 4} molecules in the crystalline matrix. A kinetic pathway, which explains our observation and which is also able to rationalize previous results in a common and coherent framework, is proposed.

  3. Orthogonal translation components for the in vivo incorporation of unnatural amino acids

    DOE Patents [OSTI]

    Schultz, Peter G.; Alfonta, Lital; Chittuluru, Johnathan R.; Deiters, Alexander; Groff, Dan; Summerer, Daniel; Tsao, Meng -Lin; Wang, Jiangyun; Wu, Ning; Xie, Jianming; Zeng, Huaqiang; Seyedsayamdost, Mohammad; Turner, James

    2015-08-11

    The invention relates to orthogonal pairs of tRNAs and aminoacyl-tRNA synthetase that can incorporate unnatural amino acid into proteins produced in eubacterial host cells such as E. coli, or in a eukaryotic host such as a yeast cell. The invention provides, for example but not limited to, novel orthogonal synthetases, methods for identifying and making the novel synthetases, methods for producing proteins containing unnatural amino acids, and translation systems.

  4. Orthogonal translation components for the in vivo incorporation of unnatural amino acids

    DOE Patents [OSTI]

    Schultz, Peter G.; Xie, Jianming; Zeng, Huaqiang

    2012-07-10

    The invention relates to orthogonal pairs of tRNAs and aminoacyl-tRNA synthetases that can incorporate unnatural amino acids into proteins produced in eubacterial host cells such as E. coli, or in a eukaryotic host such as a yeast cell. The invention provides, for example but not limited to, novel orthogonal synthetases, methods for identifying and making the novel synthetases, methods for producing proteins containing unnatural amino acids, and translation systems.

  5. Incorporate Minimum Efficiency Requirements for Heating and Cooling Products into Federal Acquisition Documents

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) organized information about FEMP-designated and ENERGY STAR-qualified heating, ventilating, and air conditioning (HVAC) and water heating products into tables that mirror American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1-2013 minimum efficiency requirement tables. Federal buyers can use these tables as a reference and to incorporate the proper purchasing requirements set by FEMP and ENERGY STAR into federal acquisition documents.

  6. Kootznoowoo Incorporated: 1+ MW Thayer Creek Hydro-electric Development Project

    Office of Environmental Management (EM)

    Presentation Kootznoowoo Incorporated 1+ MW Thayer Creek Hydro-electric Development Project Peter Naoroz General Manager Kootznoowoo, Inc. Final Design Grant No Construction Previous work done by HDR, Alaska Cost Reduction  Angoon Community Association  City of Angoon  Sealaska Corporation  Central Council of Tlingit and Haida Indian Tribes of Alaska  Inside Passage Electrical Cooperative  Our Neighboring Communities  Our First Nation Brothers and Sisters  DOE, USDA FS,

  7. Hr. Michael Esposito Audio-Tex Industries, Incorporated 4555 West Addison Street

    Office of Legacy Management (LM)

    -- Hr. Michael Esposito Audio-Tex Industries, Incorporated 4555 West Addison Street Chicago, Illinois 60641 Dear Mr. Esposito: Enclosed is a copy of the final survey report for your facility in Chicago,. Illinois , which is the site of the former ERA Tool & Engineering Company. The survey report documents the fact that the radiological condition of your facility is in compliance with applicable Department of Energy Guidelines and that no remedial action or further investigaticns are

  8. ORNL/TM-11118 RESULTS OF THE RADIOLOGICAL SURVEY AT METPATH INCORPORATED,

    Office of Legacy Management (LM)

    TM-11118 RESULTS OF THE RADIOLOGICAL SURVEY AT METPATH INCORPORATED, 1 MALCOLM AVENUE, TETERBORO, NEW JERSEY (TJOO3) FL D. Foley L. M. Floyd, Printed in the United States of America. Available from National Technical Information Serwce U.S. Department of Commerce I 5265 Port Royal Road. Springfield, Virginia 22161 NTIS price codes-Printed Copy:A03 Microfiche A01 This report was prepared as an account of work sponsored by an 8ge"cy of the

  9. Associations between iron oxyhydroxide nanoparticle growth and metal adsorption/structural incorporation

    SciTech Connect (OSTI)

    Kim, C.S.; Lentini, C.J.; Waychunas, G.A.

    2008-09-15

    The interaction of metal ions and oxyanions with nanoscale mineral phases has not yet been extensively studied despite the increased recognition of their prevalence in natural systems as a significant component of geomedia. A combination of macroscopic uptake studies to investigate the adsorption behavior of As(V), Cu(II), Hg(II), and Zn(II) onto nanoparticulate goethite ({alpha}-FeOOH) as a function of aging time at elevated temperature (75 C) and synchrotron-based X-ray studies to track changes in both the sorption mode and the rate of nanoparticle growth reveal the effects that uptake has on particle growth. Metal(loid) species which sorb quickly to the iron oxyhydroxide particles (As(V), Cu(II)) appear to passivate the particle surface, impeding the growth of the nanoparticles with progressive aging; in contrast, species that sorb more slowly (Hg(II), Zn(II)) have considerably less impact on particle growth. Progressive changes in the speciation of these particular metals with time suggest shifts in the mode of metal uptake with time, possibly indicating structural incorporation of the metal(loid) into the nanoparticle; this is supported by the continued increase in uptake concomitant with particle growth, implying that metal species may transform from surface-sorbed species to more structurally incorporated forms. This type of incorporation would have implications for the long-term fate and mobility of metals in contaminated regions, and affect the strategy for potential remediation/modeling efforts.

  10. Higher coronary heart disease and heart attack morbidity in Appalachian coal mining regions

    SciTech Connect (OSTI)

    Hendryx, M.; Zullig, K.J.

    2009-11-15

    This study analyzes the U.S. 2006 Behavioral Risk Factor Surveillance System survey data (N = 235,783) to test whether self-reported cardiovascular disease rates are higher in Appalachian coal mining counties compared to other counties after control for other risks. Dependent variables include self-reported measures of ever (1) being diagnosed with cardiovascular disease (CVD) or with a specific form of CVD including (2) stroke, (3) heart attack, or (4) angina or coronary heart disease (CHD). Independent variables included coal mining, smoking, BMI, drinking, physician supply, diabetes co-morbidity, age, race/ethnicity, education, income, and others. SUDAAN Multilog models were estimated, and odds ratios tested for coal mining effects. After control for covariates, people in Appalachian coal mining areas reported significantly higher risk of CVD (OR = 1.22, 95% CI = 1.14-1.30), angina or CHO (OR = 1.29, 95% C1 = 1.19-1.39) and heart attack (OR = 1.19, 95% C1 = 1.10-1.30). Effects were present for both men and women. Cardiovascular diseases have been linked to both air and water contamination in ways consistent with toxicants found in coal and coal processing. Future research is indicated to assess air and water quality in coal mining communities in Appalachia, with corresponding environmental programs and standards established as indicated.

  11. Passive seismic tomography application for cave monitoring in DOZ underground mine PT. Freeport Indonesia

    SciTech Connect (OSTI)

    Nurhandoko, Bagus Endar B.; Wely, Woen; Setiadi, Herlan; Riyanto, Erwin

    2015-04-16

    It is already known that tomography has a great impact for analyzing and mapping unknown objects based on inversion, travel time as well as waveform inversion. Therefore, tomography has used in wide area, not only in medical but also in petroleum as well as mining. Recently, tomography method is being applied in several mining industries. A case study of tomography imaging has been carried out in DOZ ( Deep Ore Zone ) block caving mine, Tembagapura, Papua. Many researchers are undergoing to investigate the properties of DOZ cave not only outside but also inside which is unknown. Tomography takes a part for determining this objective.The sources are natural from the seismic events that caused by mining induced seismicity and rocks deformation activity, therefore it is called as passive seismic. These microseismic travel time data are processed by Simultaneous Iterative Reconstruction Technique (SIRT). The result of the inversion can be used for DOZ cave monitoring. These information must be used for identifying weak zone inside the cave. In addition, these results of tomography can be used to determine DOZ and cave information to support mine activity in PT. Freeport Indonesia.

  12. INFRASTRUCTURE FOR INTEGRATED DATA ENVIRONMENTS AND ANALYSIS (IIDEA) FOR MINING AND PROCESSING SYSTEMS

    SciTech Connect (OSTI)

    Dessureault, Sean

    2007-06-29

    Almost all the high-production businesses face a problem of having terabytes of data but very little information is extracted from them. Efforts are being made continuously to bring the raw data into a usable format so that the meaningful information can be inferred. Once the knowledge discovery is done, proper action can be taken accordingly. The data mining and process modeling approach are used in many business sectors to better understand the process interactions within production chains by analyzing huge data repositories. A decade of intense investment in information technology by mining companies as resulted in vast quantities of underutilized data. Other industries have undergone fundamental changes through the innovative application of IT and business intelligence. This project was to undertake the investigation of the tools and techniques that would bring such data mining and requisite business processes to the mining industry. Phase I of this project was to establish the research infrastructure for Phase II and to pilot the tools and techniques through the development of an Energy Consumption Model (ECM) to predict the energy consumption in the material handling processes based on the key input variables like distance, elevation, tons hauled etc. Data mining techniques that can extract meaningful information from a raw data is available. The model developed as part of this research is an example of how energy consumption can be estimated from fundamental data.

  13. The Use of Oil Refinery Wastes as a Dust Suppression Surfactant for Use in Mining

    SciTech Connect (OSTI)

    Dixon-Hardy, D.W.; Beyhan, S.; Ediz, I.G.; Erarslan, K.

    2008-10-15

    In this research, the suitability of a selection of petroleum refinery wastes as a dust suppressant were examined. Dust is a significant problem in surface and underground mining mainly because of its adverse effects on human health and machinery. Hence, dust control and suppression is a vital part of mine planning for mining engineers. Water is the oldest and the cheapest suppressant in dealing with the mine dusts. However, surfactant use has recently been used for a wider range of applications in the mining industry. In order to carry out laboratory experiments, a dust chamber was designed and manufactured. The chamber has an inlet for coal dust entrance and a nozzle for spraying water and the oil refinery wastes. Water and the surfactants were mixed at various ratios and then sprayed onto the coal dusts within the cell. Dust concentration was measured systematically to determine the effects of surfactant containing solution on the coal dust and the data obtained by the measurements were analyzed. The results showed that the oil refinery wastes could be used as a dust suppressant, which may create an economical utilization for the wastes concerned.

  14. Establishment and growth of experimental grass species mixtures on coal mine sites reclaimed with municipal biosolids

    SciTech Connect (OSTI)

    Halofsky, J.E.; McCormick, L.H.

    2005-05-01

    The Surface Mining Control and Reclamation Act of 1977 requires that coal mine sites in the United States be reclaimed to establish vegetative cover that is diverse, native, and capable of plant succession. However, there is a question as to whether vegetation established on coal mine sites reclaimed with biosolids is diverse and capable of plant succession. The influx of nutrients with the addition of biosolids leads to long-term dominance by early-successional species, most notably grasses, and consequently, a low establishment of woody and volunteer species. Additionally, many grass species commonly planted in reclamation have aggressive growth habits that lead to their dominance in coal mine plant communities. The establishment and growth of selected grass mixes was evaluated to determine whether alternative grass mixes would be less competitive with woody and volunteer species as compared to commonly used grass mixes. Percent vegetative cover, species richness, and the survival of direct-seeded woody species were assessed for each treatment grass mixture. It was found that Poa compress and a mixture of P. compress, Panicum virgatum, and Trifolium repens provided adequate coverage while still allowing the highest species richness and survival of woody species. Use of these species mixtures in coal mine reclamation with biosolids in the eastern United States would likely lead to establishment of a more species-rich plant community with a greater woody species component while still providing erosion control and site protection.

  15. Characterization of cores from an in-situ recovery mined uranium deposit in Wyoming: Implications for post-mining restoration

    SciTech Connect (OSTI)

    WoldeGabriel, G.; Boukhalfa, H.; Ware, S. D.; Cheshire, M.; Reimus, P.; Heikoop, J.; Conradson, S. D.; Batuk, O.; Havrilla, G.; House, B.; Simmons, A.; Clay, J.; Basu, A.; Christensen, J. N.; Brown, S. T.; DePaolo, D. J.

    2014-10-08

    In-situ recovery (ISR) of uranium (U) from sandstone-type roll-front deposits is a technology that involves the injection of solutions that consist of ground water fortified with oxygen and carbonate to promote the oxidative dissolution of U, which is pumped to recovery facilities located at the surface that capture the dissolved U and recycle the treated water. The ISR process alters the geochemical conditions in the subsurface creating conditions that are more favorable to the migration of uranium and other metals associated with the uranium deposit. There is a lack of clear understanding of the impact of ISR mining on the aquifer and host rocks of the post-mined site and the fate of residual U and other metals within the mined ore zone. We performed detailed petrographic, mineralogical, and geochemical analyses of several samples taken from about 7 m of core of the formerly the ISR-mined Smith RanchHighland uranium deposit in Wyoming. We show that previously mined cores contain significant residual uranium (U) present as coatings on pyrite and carbonaceous fragments. Coffinite was identified in three samples. Core samples with higher organic (> 1 wt.%) and clay (> 617 wt.%) contents yielded higher 234U/238U activity ratios (1.01.48) than those with lower organic and clay fractions. The ISR mining was inefficient in mobilizing U from the carbonaceous materials, which retained considerable U concentrations (37411,534 ppm). This is in contrast with the deeper part of the ore zone, which was highly depleted in U and had very low 234U/238U activity ratios. This probably is due to greater contact with the lixiviant (leaching solution) during ISR mining. EXAFS analyses performed on grains with the highest U and Fe concentrations reveal that Fe is present in a reduced form as pyrite and U occurs mostly as U(IV) complexed by organic matter or as U(IV) phases of carbonate complexes. Moreover, UO distances of ~ 2.05 were noted, indicating the potential formation of other poorly defined U(IV/VI) species. We also noted a small contribution from Udouble bond; length as m-dashO at 1.79 , which indicates that U is partially oxidized. There is no apparent US or UFe interaction in any of the U spectra analyzed. However, SEM analysis of thin sections prepared from the same core material reveals surficial U associated with pyrite which is probably a minor fraction of the total U present as thin coatings on the surface of pyrite. Our data show the presence of different structurally variable uranium forms associated with the mined cores. U associated with carbonaceous materials is probably from the original U mobilization that accumulated in the organic matter-rich areas under reducing conditions during shallow burial diagenesis. U associated with pyrite represents a small fraction of the total U and was likely deposited as a result of chemical reduction by pyrite. Our data suggest that areas rich in carbonaceous materials had limited exposure to the lixiviant solution, continue to be reducing, and still hold significant U resources. Because of their limited access to fluid flow, these areas might not contribute significantly to post-mining U release or attenuation. Areas with pyrite that are accessible to fluids seem to be more reactive and could act as reductants and facilitate U reduction and accumulation, limiting its migration.

  16. Port Radium Canada's Original Radium/Uranium Mine, The Complete Story of Canada's Historic Radium/Uranium Mine, 1932 to 2012 - 13159

    SciTech Connect (OSTI)

    Chambers, Doug; Wiatzka, Gerd; Brown, Steve

    2013-07-01

    This paper provides the life story of Canada's original radium/uranium mine. In addition to the history of operations, it discusses the unique and successful approach used to identify the key issues and concerns associated with the former radium, uranium and silver mining property and the activities undertaken to define the remedial actions and subsequent remedial plan. The Port Radium Mine site, situated approximately 275 km north of Yellowknife on the east shore of Great Bear Lake, Northwest Territories, was discovered in 1930 and underground mining began in 1932. The mine operated almost continuously from 1932 to 1982, initially for recovery of radium, then uranium and finally, for recovery of silver. Tailings production totaled an estimated 900,000 tons and 800,000 tons from uranium and silver processing operations respectively. In the early days of mining, Port Radium miners were exposed to radon and associated decay product levels (in Working Level Months of exposure - WLM) hundreds of times greater than modern standards. The experience of the Port Radium miners provides important contribution to understanding the risks from radon. While the uranium mine was originally decommissioned in the early 1960's, to the standards of the day, the community of Deline (formerly Fort Franklin) had concerns about residual contamination at the mine site and the potential effects arising from use of traditional lands. The Deline people were also concerned about the possible risks to Deline Dene arising from their work as ore carriers. In the late 1990's, the community of Deline brought these concerns to national attention and consequently, the Government of Canada and the community of Deline agreed to move forward in a collaborative manner to address these concerns. The approach agreed to was to establish the Canada-Deline Uranium Table (CDUT) to provide a joint process by which the people of Deline could have their concerns expressed and addressed. A great deal of work was done through the CDUT, including efforts to assess site environment and safety issues in the context of modern reclamation standards. In addition to the environmental and remediation studies, an assessment of historic exposures of Deline ore carriers to radiation and a follow-up epidemiological feasibility study were performed. SENES Consultants Limited (SENES) carried out the dose reconstruction for the Port Radium miners in the 1990's, was the environmental consultant to the CDUT from 2000 to 2005, developed the Remedial Action Plan (RAP), engineering plans and specifications for decommissioning the Port Radium mine and vicinity sites in 2005/6, supervised the remedial works in 2007 and carried out the long term post closure monitoring from 2008 to 2012. Our firsthand experience from working cooperatively with the CDUT provides insights into effective decommissioning of historic contaminated sites. (authors)

  17. Downstream effects of mountaintop coal mining: comparing biological conditions using family- and genus-level macroinvertebrate bioassessment tools

    SciTech Connect (OSTI)

    Pond, G.J.; Passmore, M.E.; Borsuk, F.A.; Reynolds, L.; Rose, C.J.

    2008-09-15

    Surface coal mining with valley fills has impaired the aquatic life in numerous streams in the Central Appalachian Mountains. We characterized macroinvertebrate communities from riffles in 37 small West Virginia streams (10 unmined and 27 mined sites with valley fills) sampled in the spring index period (March-May) and compared the assessment results using family- and genus-level taxonomic data. Specific conductance was used to categorize levels of mining disturbance in mined watersheds as low (<500 {mu} S/cm), medium (500-1000 {mu} S/cm), or high (>1000 {mu} S/cm). Four lines of evidence indicate that mining activities impair biological condition of streams: shift in species assemblages, loss of Epherneroptera taxa, changes in individual metrics and indices, and differences in water chemistry. Results were consistent whether family- or genus-level data were used. In both family- and genus-level nonmetric multidimensional scaling (NMS) ordinations, mined sites were significantly separated from unmined sites, indicating that shifts in community structure were caused by mining. Several Epherneroptera genera (e.g., Ephemerella, Epeorus, Drunella) and their families (Ephemerellidae, Heptageniidae) were correlated most strongly with the primary NMS axis. These same Ephemeroptera were absent and, thus, eliminated from most of the mined sites. Total Ephemeroptera richness and relative abundance both declined with increasing mining disturbance. Several other metrics, such as richness, composition, tolerance, and diversity, clearly discriminated unmined vs mined sites. The results show that mining activity has had subtle to severe impacts on benthic macroinvertebrate communities and that the biological condition most strongly correlates with a gradient of ionic strength.

  18. A Hydrostratigraphic Model and Alternatives for the Groundwater Flow and Contaminant Transport Model of Corrective Action Unit 97: Yucca Flat-Climax Mine, Lincoln and Nye Counties, Nevada

    SciTech Connect (OSTI)

    Geotechnical Sciences Group Bechtel Nevada

    2006-01-01

    A new three-dimensional hydrostratigraphic framework model for the Yucca Flat-Climax Mine Corrective Action Unit was completed in 2005. The model area includes Yucca Flat and Climax Mine, former nuclear testing areas at the Nevada Test Site, and proximal areas. The model area is approximately 1,250 square kilometers in size and is geologically complex. Yucca Flat is a topographically closed basin typical of many valleys in the Basin and Range province. Faulted and tilted blocks of Tertiary-age volcanic rocks and underlying Proterozoic and Paleozoic sedimentary rocks form low ranges around the structural basin. During the Cretaceous Period a granitic intrusive was emplaced at the north end of Yucca Flat. A diverse set of geological and geophysical data collected over the past 50 years was used to develop a structural model and hydrostratigraphic system for the basin. These were integrated using EarthVision? software to develop the 3-dimensional hydrostratigraphic framework model. Fifty-six stratigraphic units in the model area were grouped into 25 hydrostratigraphic units based on each unit's propensity toward aquifer or aquitard characteristics. The authors organized the alluvial section into 3 hydrostratigraphic units including 2 aquifers and 1 confining unit. The volcanic units in the model area are organized into 13 hydrostratigraphic units that include 8 aquifers and 5 confining units. The underlying pre-Tertiary rocks are divided into 7 hydrostratigraphic units, including 3 aquifers and 4 confining units. Other units include 1 Tertiary-age sedimentary confining unit and 1 Mesozoic-age granitic confining unit. The model depicts the thickness, extent, and geometric relationships of these hydrostratigraphic units (''layers'' in the model) along with the major structural features (i.e., faults). The model incorporates 178 high-angle normal faults of Tertiary age and 2 low-angle thrust faults of Mesozoic age. The complexity of the model area and the non-uniqueness of some of the interpretations incorporated into the base model made it necessary to formulate alternative interpretations for some of the major features in the model. Five of these alternatives were developed so they could be modeled in the same fashion as the base model. This work was done for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Underground Test Area subproject of the Environmental Restoration Project.

  19. Coal mining and the environment: Does SMCRA give regulators appropriate enforcement tools?

    SciTech Connect (OSTI)

    Shea, C.W.

    1994-12-31

    The Surface Mining Control and Reclamation Act of 1977 (SMCRA), 30 U.S.C. 1201 et seq (1990), reshaped the regulation of coal mining and affored government regulators a comprehensive set of enforcement tools. Major controveries remain, such as the definitions haping the Application Violator System, and the extent of federal authority to oversee the states` primary enforcement responsibility. Despite these contentious issues the federal and state programs have fundamentally succeeded in enforcing SMCRA and have successfully altered the landscape of coal mining. The structure of SMCRA`s enforcement provisions is a critical factor in this success. The article discusses in more detain the following areas: the core of SMCRA: permits and Bonds; Maintaining Standards: inspections and sanction for noncompliance; the applicant violator system; other enforcement tools.

  20. National inventory of abandoned mine land problems: an emphasis on health, safety, and general welfare impacts

    SciTech Connect (OSTI)

    Honea, R.B.; Baxter, F.P.

    1984-07-01

    In 1977 Congress passed the Surface Mining Control and Reclamation Act, which provided for the abatement of abandoned mine land (AML) problems through a reclamation program funded by a severance tax on current mining. AML was defined as any land, including associated buildings, equipment, and affected areas, that was no longer being used for coal mining by August 1977. This act also created the Office of Surface Mining (OSM) in the Department of the Interior to administer the AML program and to assume other regulatory and research responsibilities. This report documents the design, implementation, and results of a National inventory of the most serious problems associated with past mining practices. One of the objectives of the Inventory was to help OSM and the participating states locate, identify, and rank AML problems and estimate their reclamation costs. Other objectives were to encourage states and Indian tribes to collect such data and to provide OSM with the information necessary to guide its decision-making processes and to quantify the progress of the reclamation program. Because only limited funds were available to design and implement the National inventory and because the reclamation fund established by the Act may never be sufficient to correct all AML problems, OSM has focused on only the top-priority problems. It is stressed that this is not an inventory of AML features but rather an inventory of AML impacts. It should be noted that the data and analysis contained in this report are based on a data collection effort conducted by the states, Indian tribes, and OSM contractors between 1979 and mid-1982.