Powered by Deep Web Technologies
Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Source category survey: mineral wool manufacturing industry. Final report  

SciTech Connect

This report contains background information which was used for determining the need for new source performance standards (NSPS) for the mineral wool manufacturing industry in accordance with Section 111 of the Clean Air Act. Air pollution emissions and growth trends of the mineral wool industry are examined. Manufacturing processes, control strategies, and state and local air pollution regulations are discussed. The impact of a potential NSPS on particulate and carbon monoxide emissions is calculated.

Not Available

1980-06-01T23:59:59.000Z

2

Solar energy industry survey  

SciTech Connect

This report describes the results of a survey of companies in the solar energy industry. The general objective of the survey was to provide information to help evaluate the effectiveness of technology transfer mechanisms for the development of the solar industry. The specific objectives of the survey included: (1) determination of the needs of the solar industry; (2) identification of special concerns of the solar industry; and (3) determination of the types of technology transfer mechanisms that would be most helpful to the solar industry in addressing these needs and concerns. The major focus was on technical problems and developments, but institutional and marketing considerations were also treated. The majority of the sample was devoted to the solar heating and cooling (SHAC) component of the industry. However, a small number of photovoltaic (PV), wind, and power generation system manufacturers were also surveyed. Part I discusses the methodology used in the selection, performance, and data reduction stages of the survey, comments on the nature of the responses, and describes the conclusions drawn from the survey. The latter include both general conclusions concerning the entire solar industry, and specific conclusions concerning component groups, such as manufacturers, architects, installers, or dealers. Part II consists of tabulated responses and non-attributed verbatim comments that summarize and illustrate the survey results.

1979-08-06T23:59:59.000Z

3

Mineral Sequestration Utilizing Industrial By-Products, Residues, and Minerals  

NLE Websites -- All DOE Office Websites (Extended Search)

J. Fauth and Yee Soong J. Fauth and Yee Soong U.S. Department of Energy National Energy Technology Laboratory Pittsburgh PA, 15236-0940 Mineral Sequestration Workshop National Energy Technology Laboratory August 8, 2001 Mineral Sequestration Utilizing Industrial By-Products, Residues, and Minerals Mineral Sequestration Workshop, U.S. Department of Energy, NETL, August 8, 2001 Overview * Introduction - Objective - Goals - NETL Facilities * Effect of Solution Chemistry on Carbonation Efficiency - Buffered Solution + NaCl - Buffered Solution + MEA * Effect of Pretreatment on Carbonation Efficiency - Thermal Treatments - Chemical Treatments * Carbonation Reaction with Ultramafic Minerals - Serpentine - Olivine Mineral Sequestration Workshop, U.S. Department of Energy, NETL, August 8, 2001 Overview * Carbonation Reaction with Industrial By-products

4

Vietnam National Coal Mineral Industries Group Vinacomin | Open...  

Open Energy Info (EERE)

Coal Mineral Industries Group Vinacomin Jump to: navigation, search Name Vietnam National Coal-Mineral Industries Group (Vinacomin) Place Vietnam Product Vietnam-based project...

5

Minerals yearbook: The mineral industry of Mexico. 1988 international review  

SciTech Connect

Mexico is one of the major mineral-producing countries in the world, continuing in 1988 a role that the nation had assumed since the first European settlement of the Western Hemisphere. With respect to nonfuel minerals, Mexico was the world's leading producer of bismuth and silver; was among the top 5 producers of barite, fluorspar, graphite, molybdenum, and strontium; and was among the top 10 producers of antimony, white arsenic, cadmium, copper, lead, manganese, mercury, salt, selenium, sulfur, and zinc. In the mineral fuels sector, Mexico was the sixth largest producer of crude oil and ranked eighth in terms of proven oil reserves. In addition, Mexico was the largest foreign supplier of crude oil and cement to the United States. Topics discussed in the report include: Government policies and programs; Production; Trade; Commodity review--Metals, Industrial minerals, and Mineral fuels.

Machamer, J.F.

1988-01-01T23:59:59.000Z

6

Climate VISION: PrivateSector Initiatives: Minerals - Industry...  

Office of Scientific and Technical Information (OSTI)

together to achieve common goals. Industrial minerals - ball clay, bentonite, borates, feldspar, industrial sand, mica, soda ash and talc - are a miraculous gift from times past....

7

Energy Efficiency in Mineral Processing Industry Using High ...  

Science Conference Proceedings (OSTI)

Presentation Title, Energy Efficiency in Mineral Processing Industry Using High ... These studies were prepared by Tetra Tech on eight different projects at ...

8

World Economics of Selected Industrial Minerals  

Science Conference Proceedings (OSTI)

Jan 1, 1971 ... It is a very interesting field, different in many respects from metals and certainly far different from petroleum. The minerals chosen are celestite, ...

9

Sustainability education for minerals industry professionals  

Science Conference Proceedings (OSTI)

Decomposition of methane during oxide reduction using Natural gas · DELIVERING A NATIONAL PROCESS DESIGN UNIT WITH INDUSTRY SUPPORT.

10

Assessment of industrial minerals and rocks in the controlled area  

Science Conference Proceedings (OSTI)

Yucca Mountain in Nye County, Nevada, is a potential site for a permanent repository for high-level nuclear waste in Miocene ash flow tuff. The Yucca Mountain controlled area occupies approximately 98 km{sup 2} that includes the potential repository site. The Yucca Mountain controlled area is located within the southwestern Nevada volcanic field, a large area of Miocene volcanism that includes at least four major calderas or cauldrons. It is sited on a remnant of a Neogene volcanic plateau that was centered around the Timber Mountain caldera complex. The Yucca Mountain region contains many occurrences of valuable or potentially valuable industrial minerals, including deposits with past or current production of construction aggregate, borate minerals, clay, building stone, fluorspar, silicate, and zeolites. The existence of these deposits in the region and the occurrence of certain mineral materials at Yucca Mountain, indicate that the controlled area may have potential for industrial mineral and rock deposits. Consideration of the industrial mineral potential within the Yucca Mountain controlled area is mainly based on petrographic and lithologic studies of samples from drill holes in Yucca Mountain. Clay minerals, zeolites, fluorite, and barite, as minerals that are produced economically in Nevada, have been identified in samples from drill holes in Yucca Mountain.

Castor, S.B. [Nevada Bureau of Mines and Geology, Reno, NV (United States); Lock, D.E. [Mackay School of Mines, Reno, NV (United States)

1996-08-01T23:59:59.000Z

11

STATE OF OREGON DEPARTMENT OF GEOLOGY AND MINERAL INDUSTRIES  

NLE Websites -- All DOE Office Websites (Extended Search)

OREGON OREGON DEPARTMENT OF GEOLOGY AND MINERAL INDUSTRIES Portland, Oregon 97201 910 State Office Building r DOE/ID/12526--T2 OPEN-FILE REPORT 0-86-3 DE87 013077 INVESTIGATION OF THE TEIERMAL REGIME AND GEOLOGIC HISTORY OF THE DRILLING IN THE CASCADE RANGE CASCADE VOLCANIC ARC: FIRST PHASE OF A PROGRAM FOR SCIENTIFIC Prepared by George R . Priest Oregon Department of Geology and Mineral Industries Preparation and publication of this document were supported b the Ore on Department of Geology and Mineral Industries and Grant No. DE-%G07-841&.2526 from the U . S . Department of Energy DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees,

12

Illinois mineral industry in 1978, and review of preliminary mineral production data for 1979  

SciTech Connect

This annual report of mineral production in Illinois in 1978 summarizes the output and value of minerals mined, and processed in Illinois, and of mineral products manufactured but not necessarily mined in Illinois. The total value of production in all three categories was $3170.7 million. The total value of mineral materials mined was $1637.0 million, with the mineral fuels-coal, crude oil, and natural gas-contributing 80.7 percent of the total value. Processed mineral materials were valued at $1206.9 million, and mineral products manufactured totaled $326.8 million in 1978. Coal continued to be the leading commodity in terms of value; oil ranked second; stone and sand and gravel, used largely for construction, ranked third and fourth; and fluorspar was fifth. Illinois remained the leading US producer of fluorspar, tripoli, and industrial sand, and ranked third in stone and peat, fifth in bituminous coal, sixth in total sand and gravel. Preliminary data indicate that the value of minerals mined in 1979 reached an all time high of $2131.0 million, from $1637.0 million in 1978. Detailed production summaries and analyses-including maps, tables, and graphs-are given for all mineral commodities.

Samson, I.

1981-02-01T23:59:59.000Z

13

Oregon State Department of Geology and Mineral Industries | Open Energy  

Open Energy Info (EERE)

State Department of Geology and Mineral Industries State Department of Geology and Mineral Industries Jump to: navigation, search Logo: Oregon State Department of Geology and Mineral Industries Name Oregon State Department of Geology and Mineral Industries Address Ste. 965 Northeast Oregon Street Place Portland, OR Zip 97232 Website http://www.oregongeology.org/s Coordinates 45.5286301°, -122.656652° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.5286301,"lon":-122.656652,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

14

Illinois mineral industry in 1984 and review of preliminary mineral production data for 1985. Illinois mineral notes  

SciTech Connect

The annual output and value of Illinois minerals extracted, processed, and manufactured into products in 1984 are summarized in the report. Materials used in manufacturing were not necessarily extracted within the state. Coal continued to be the leading commodity in terms of value; oil ranked second; stone and sand and gravel ranked third and fourth; fluorspar was fifth. Nationally, Illinois ranked eighteenth in value of nonfuel mineral production. It remained the principal U.S. producer of fluorspar, tripoli, and industrial sand and led in the manufacture of iron-oxide pigments. In stone and peat production, the state ranked fourth. Preliminary data for 1985 indicate that the value of minerals mined was $2,947.8 million, a decrease of 6.1 percent from the $3,138.0 million in 1984. Detailed production summaries and analyses--including maps, tables, and graphs--for all mineral commodities are based on data available for 1984.

Samson, I.E.; Bhagwat, S.B.

1986-01-01T23:59:59.000Z

15

Industry Survey of Radioactive Material Control Practices  

Science Conference Proceedings (OSTI)

Workers and materials entering and exiting the radiation control areas (RCAs) of nuclear power plants are carefully monitored for radioactivity. This report documents a survey developed to evaluate the range of instrumentation and practices used by the industry for performing such measurements.

2003-11-26T23:59:59.000Z

16

Geothermal industry employment: Survey results & analysis  

DOE Green Energy (OSTI)

The Geothermal Energy Association (GEA) is ofteh asked about the socioeconomic and employment impact of the industry. Since available literature dealing with employment involved in the geothermal sector appeared relatively outdated, unduly focused on certain activities of the industry (e.g. operation and maintenance of geothermal power plants) or poorly reliable, GEA, in consultation with the DOE, decided to conduct a new employment survey to provide better answers to these questions. The main objective of this survey is to assess and characterize the current workforce involved in geothermal activities in the US. Several initiatives have therefore been undertaken to reach as many organizations involved in geothermal activities as possible and assess their current workforce. The first section of this document describes the methodology used to contact the companies involved in the geothermal sector. The second section presents the survey results and analyzes them. This analysis includes two major parts. The first part analyzes the survey responses, presents employment numbers that were captured and describes the major characteristics of the industry that have been identified. The second part of the analysis estimates the number of workers involved in companies that are active in the geothermal business but did not respond to the survey or could not be reached. Preliminary conclusions and the study limits and restrictions are then presented. The third section addresses the potential employment impact related to manufacturing and construction of new geothermal power facilities. Indirect and induced economic impacts related with such investment are also investigated.

Not Available

2005-09-01T23:59:59.000Z

17

Summary of Industry Surveys on Future Capacity Commitments  

U.S. Energy Information Administration (EIA)

Energy Information Administration Natural Gas 1996: Issues and Trends 141 Appendix C Summary of Industry Surveys on Future Capacity Commitments Table C1.

18

Minerals yearbook: Mineral industries of Africa. Volume 3. 1992 international review  

SciTech Connect

The 53 countries that constituted Africa in 1992 accounted for a significant portion of total world output of a number of mineral commodities. Among the most significant mineral commodities produced in Africa were andalusite, antimony, asbestos, bauxite, chromite, coal, cobalt, copper, diamond, fluorspar, gold, lithium minerals, manganese, phosphate, platinum-group metals, the titanium minerals-ilmenite and rutile, vanadium, vermiculite, uranium, and zircon. Chromite, cobalt, and manganese, were not mined in the Untied States.

Not Available

1992-01-01T23:59:59.000Z

19

Climate VISION: Private Sector Initiatives: Minerals: GHG Information  

Office of Scientific and Technical Information (OSTI)

Read the Industrial Minerals Association - North America (IMA-NA) 2011 Greenhouse Gas and Energy Survey Industry Summary for the period from 2000 to 2010 (PDF 16 KB)...

20

emissions: mineral carbonation and Finnish pulp and paper industry (CO2  

E-Print Network (OSTI)

- ation of slags from iron- and steel industry" pre- sented at the 4th Nordic Mini-symposium on CO2CO2 emissions: mineral carbonation and Finnish pulp and paper industry (CO2 Nordic Plus) and Use of serpentinites in energy and metal industry (ECOSERP) Carl-Johan Fogelholm, Project leader, professor Sanni

Zevenhoven, Ron

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Minerals yearbook: Mineral industries of Africa. Volume 3. 1990 international review  

SciTech Connect

The 53 countries that constituted Africa in 1990 accounted for a significant portion of total world output of a number of mineral commodities. Among the most significant to be produced in Africa were andalusite, antimony, asbestos, bauxite, chromite, coal, cobalt, copper, diamond, fluorspar, gold, lithium minerals, manganese, phosphate, platinum-group metals, the titanium minerals--ilmenite and rutile, vanadium, vermiculite, uranium, and zircon. Several of these, chromite, cobalt, diamond, and manganese, were not produced in the United States.

Not Available

1990-01-01T23:59:59.000Z

22

LASER Welding Survey for Power Generation Industry  

Science Conference Proceedings (OSTI)

EPRI has developed technology for laser weld repair of steam generator tubes in light water reactors. This technology has promise for other specialized welding and heat treatment applications in the power generation industry.

1998-04-23T23:59:59.000Z

23

Industry  

E-Print Network (OSTI)

oxide emission reductions in industry in the EU. Europeanissues: Annual survey of industries. Central StatisticalDesiccated coconut industry of Sri- Lanka’s opportunities

Bernstein, Lenny

2008-01-01T23:59:59.000Z

24

Survey paper: A survey on industrial applications of fuzzy control  

Science Conference Proceedings (OSTI)

Fuzzy control has long been applied to industry with several important theoretical results and successful results. Originally introduced as model-free control design approach, model-based fuzzy control has gained widespread significance in the past decade. ... Keywords: Adaptive fuzzy control, Mamdani fuzzy controllers, Predictive control, Stable design, Takagi-Sugeno fuzzy controllers

Radu-Emil Precup; Hans Hellendoorn

2011-04-01T23:59:59.000Z

25

Industry  

E-Print Network (OSTI)

the paper, glass or ceramics industry) making it difficulttechnology in the ceramic manufacturing industry. industries: iron and steel, non-ferrous metals, chemicals (including fertilisers), petroleum refining, minerals (cement, lime, glass and ceramics) and

Bernstein, Lenny

2008-01-01T23:59:59.000Z

26

Survey of government assistance for the world's hard-coal industries  

Science Conference Proceedings (OSTI)

This report investigates the existence and use of subsidies and incentives that foreign nations give their coal industries. Of particular interest are those aids that promote and facilitate the export of coal. A survey of hard coal producing countries was conducted to compile, and quantify if possible, direct and indirect financial aids given by governments for the purposes of maintaining, expanding or creating an indigenous coal industry and facilitating exports. The survey found that government measures commonly used to maintain, expand or create coal production include deficit operating grants, capital grants, preferential loan credits, labor and tax benefits, and export marketing assistance. Typical measures used to guarantee and protect domestic coal markets are long-term supply agreements, price supports, government purchases, tariffs, import licenses, and quotas. Common types of financial assistance provided by governments that do not benefit current coal production or use are research and development funds, environmental grants for restoring past mined lands, and payments to unemployed miners.

Neme, L.A.; Yancik, J.J.

1989-05-01T23:59:59.000Z

27

Illinois mineral industry in 1981-83 and review of preliminary mineral production data for 1984. Illinois mineral notes  

SciTech Connect

The output and value of minerals mined, processed, and manufactured into products in Illinois are summarized in this report for 1981-83. Materials used in manufacturing were not necessarily extracted within the state. Coal continued to be the leading commodity in terms of value. Oil ranked second; stone, third; sand and gravel, fourth; and fluorspar, fifth.

Samson, I.E.; Bhagwat, S.B.

1985-01-01T23:59:59.000Z

28

Manufacturing-Industrial Energy Consumption Survey(MECS) Historical  

U.S. Energy Information Administration (EIA) Indexed Site

> Historical Publications > Historical Publications Manufacturing Establishments reports, data tables and questionnaires Released: May 2008 The Manufacturing Energy Consumption Survey (MECS) is a periodic national sample survey devoted to measuring energy consumption and related issues in the manufacturing sector. The MECS collects data on energy consumption, purchases and expenditures, and related issues and behaviors. Links to previously published documents are given below. Beginning in 1998, reports were only issued electronically. Additional electronic releases are available on the MECS Homepage. The basic unit of data collection for this survey is the manufacturing establishment. Industries are selected according to definitions found in the North American Industry Classification System (NAICS), which replace the earlier Standard Industrial Classification (SIC) system.

29

A Survey of the U.S. Energy ServiceA Survey of the U.S. Energy Service Company (ESCO) Industry: MarketCompany (ESCO) Industry: MarketCompany (ESCO) Industry: MarketCompany (ESCO) Industry: Market  

E-Print Network (OSTI)

A Survey of the U.S. Energy ServiceA Survey of the U.S. Energy Service Company (ESCO) Industry and savings 33 #12;Estimated Size of U.S. ESCO IndustryEstimated Size of U.S. ESCO Industry Energy AnalysisGrowth Projections for U.S. ESCO Industry Energy Analysis Department Electricity Markets and Policy Group 55 #12

30

Mineral-wool industry: opportunities for natural gas technologies. Topical report, January-July 1987  

SciTech Connect

To quantify the opportunities for natural gas and identify technological advances needed to capture such opportunities, the mineral-wool industry was analyzed with respect to the principal companies, their capabilities, and markets. The mineral-wool industry is stable with a slightly declining market. Of its market segments, only commercial acoustic insulation (which is currently dominant) is likely to be affected by growth in the next ten years. The principal process is based on treatment of blast-furnace slags in a cupola furnace using coke as the fuel and reducing agent. Expanded use of gas, as a substitute for coke, would eliminate environmental problems and expand the latitude of suitable raw materials. The study provides insights into the mineral-wool industry and identifies factors that may constitute bases for future usage of natural gas.

Not Available

1988-05-01T23:59:59.000Z

31

Minerals yearbook: Mineral industries of the Middle East. Volume 3. 1989 international review  

SciTech Connect

The production and processing of crude petroleum and natural gas are the dominant economic sectors of the Middle East. The 15 countries that constitute the region accounted for 26% of world crude petroleum output, 17% of world natural gas plant liquid production, and almost 5% of world dry natural gas production. About 66% of total world crude petroleum reserves and 31% of total world natural gas reserves are in the Middle East. U.S. imports of mineral-based materials from the region were primarily energy products. U.S. net oil imports from the Middle East, which include crude petroleum, natural gas liquids, and petroleum refinery products, were about 26% of total U.S. net oil imports or about 680 million barrels in 1989.

Not Available

1989-01-01T23:59:59.000Z

32

Regional gravity and aeromagnetic surveys of the Mineral Mountains and vicinity, Millard and Beaver Counties, Utah  

DOE Green Energy (OSTI)

The results of gravity and aeromagnetic surveys of the Mineral Mountains and vicinity are presented as a terrain-corrected Bouguer gravity anomaly map (about 1450 stations with 1-mgal contour interval) and a total magnetic field intensity residual anomaly map (with contour interval 50 gammas), respectively. Combined interpretation of the gravity and aeromagnetic data was conducted based on comparing and contrasting various processed maps and interpretative geologic cross sections produced from each survey. (MHR)

Carter, J.A.; Cook, K.L.

1978-04-01T23:59:59.000Z

33

RADIATION: A TOOL FOR INDUSTRY. A Survey of Current Technology  

SciTech Connect

This one-year survey of industrial applications of ionizing radiation is based on interviews with workers in the field and on analysis of selected literature. ionizing radiation at kilowatt power levels from electron accelerators and from radionuclides is finding a few special applications, notably sterilization and be in various stages of process development and tcsting. These are concentrated heavily in the plastics field, though examples are found in petrochemical synthesis, product sterilization, and portable energy sources such as batteries. Ionizing radiation is not yet a processing tool of major importance to industry generally, however, because it has not yet demonstrated sufficient advantages over established methods of achieving a similar result. Thus, though ionizing radiation produces free radicals under a wide variety of conditions, it has, with few exceptions, not proved superior to other agents, such as heat and chemicals, that also produce free radicals. Insufficient specificity of action, low yields, and costs higher than those of competitive processes are among the chief difficulties found. Possible unique features of radiation have not been fully explored. Optimization of enviromental variables has not been thoroughly studied. Indirect advantages associated with radiation, such as greater processing or packaging flexibility, have already proved significantly important but have not yet been thoroughly evaluated in most potential applications. Even radiation engineering is relatively undeveloped and radiation economics uncertain. Skillfully oriented research and development on such problems will improve the likelihood of radiation becoming a tool of major importance for U.S. industry. (auth)

1959-01-01T23:59:59.000Z

34

Survey and analyze the business conditions of the solar industry, June-July 1981. Task I  

DOE Green Energy (OSTI)

Progress is reported on the following tasks: surveying and analyzing the business conditions of the solar industry, administrative analysis of solar system product certification standards and codes, and solar industry advertising guidelines. (MHR)

Not Available

1981-01-01T23:59:59.000Z

35

Changing role of the nonfuel mineral industry in the state and local economies of Arizona (1981-1986)  

Science Conference Proceedings (OSTI)

The Bureau of Mines is currently analyzing the impacts of changes in nonfuel mineral industry activity upon regional economies. As part of the project the Bureau examined the impacts on Arizona and four of its counties resulting from significant changes in nonfuel mineral production between 1981 and 1986. Regional input-output models for Arizona and the counties of Gila, Greenlee, Pima, and Pinal were developed through IMPLAN, the U.S. Forest Service's economic impact model. These models generated multipliers to measure total impacts of changes in activity on employment, earnings, and indirect business taxes. From 1981 to 1983 metallic nonfuel mineral production in Arizona declined significantly. Findings show that county economies are quite sensitive to changes in nonfuel mineral production.

Opyrchal, A.M.; Swisko, G.M.; Adams, R.L.

1988-04-01T23:59:59.000Z

36

3rd International Conference on Sustainable Development Indicators 495 in the Minerals Industry, June 2007, Milos island, Greece  

E-Print Network (OSTI)

to develop a process for stake- holder education and engagement in sustainable energy. 1. INTRODUCTION 1 the release of greenhouse gases and the development of sustainable energy technologies. Figure 2: U.S. DOE3rd International Conference on Sustainable Development Indicators 495 in the Minerals Industry

37

Member Survey of Industry Issues for Hardware and Conductors  

Science Conference Proceedings (OSTI)

This report presents the results of a survey to obtain information on atmospheric corrosion issues associated with overhead transmission line hardware and conductors exposed to the environment. Atmospheric corrosion is a natural and unavoidable phenomenon that can lead to the premature failure of conductors, shield wires, hardware or components and result in momentary or even sustained outages. Survey results will help support research and development activities to extend the capabilities of ...

2012-12-12T23:59:59.000Z

38

Member Survey on Steel Crossarms: Industry Issues Regarding Degradation, Inspection, Life Assessment and Mitigation  

Science Conference Proceedings (OSTI)

This report presents the results of a survey to obtain information on industry issues related to steel crossarm degradation and failures, and utility practices regarding inspection, life assessment, and mitigation. Survey results will help improve understanding of crossarm issues to be addressed, and provide guidance for further research on degradation modes, inspection technologies, and mitigation techniques.A web-based survey tool was used to construct a set of focused questions to ...

2012-12-12T23:59:59.000Z

39

Review: Industrial aspects and literature survey: Fleet composition and routing  

Science Conference Proceedings (OSTI)

The purpose of this paper is to describe industrial aspects of combined fleet composition and routing in maritime and road-based transportation, and to present the current status of research in the form of a comprehensive literature review. First, presents ... Keywords: Fleet composition, Fleet dimensioning, Fleet size and mix, Maritime transportation, Road-based transportation, Vehicle routing

Arild Hoff; Henrik Andersson; Marielle Christiansen; Geir Hasle; Arne Løkketangen

2010-12-01T23:59:59.000Z

40

Workforce Development: A Survey of Industry Needs and Training Approaches  

DOE Green Energy (OSTI)

This paper presents information and data collected during 2008 on PV workforce needs by the Interstate Renewable Energy Council for the U.S. Department of Energy. The data was collected from licensed contractors, PV practitioners, educators and expert instructors at training sessions, and at focus group and advisory committee meetings. Respondents were primarily from three states: Florida, New York and California. Other states were represented, but to a lesser extent. For data collection, a 12-item questionnaire was developed that addressed key workforce development issues from the perspectives of both the PV industry and training institutions. A total of 63 responses were collected, although not every respondent answered every question. Industry representatives slightly outnumbered the educators, although the difference in responses was not significant.

Ventre, Jerry; Weissman, Jane

2009-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

1983 annual report on Alaska's mineral resources. Geological Survey Circular 908  

Science Conference Proceedings (OSTI)

This report describes activity during 1982 in Alaska relating to oil and gas, uranium, coal and peat, geothermal resources, and non-fuel, critical and strategic minerals. (ACR)

Not Available

1983-01-01T23:59:59.000Z

42

Development of mineral wool from industrial wastes. Phase i. Final report 1 Sep 80-28 Feb 81  

SciTech Connect

The feasibility of using unprocessed industrial wastes to produce mineral wool was investigated by literature and patent searches and by experimental production of mineral wool. Slag ash from coal burning utilities and cement kiln waste from cement companies were combined in batch formulations having acid to alkali ratios of 0.8 to 1.2, then melted, fiberized, and analyzed for physical, thermal, chemical, and optical properties. Cement kiln waste added to the slag ash in controlled quantities served as a fluxing agent, and lowered the melting point of the slag ash from 2800 degrees F to 2500 degrees F. The softening point of the fibers was between 1250 degrees F and 1480 degrees F. The surface of the fibers was smooth at a magnification of 800x, and X-ray analysis showed no crystallization. The glasses were chemically stable, and possessed the rheological properties necessary to produce mineral wool. Potential applications include using the mineral wool for insulation. Immersion in cement slurry for 24 hours did not affect the fibers, indicating that they might also be used as alkali resistant components for fiber-reinforced concrete.

Ali, M.A.

1981-02-01T23:59:59.000Z

43

The relationship between the bone mineral density and urinary cadmium concentration of residents in an industrial complex  

SciTech Connect

Background: An association between cadmium exposure and bone mineral density (BMD) has been demonstrated in elderly women, but has not been well studied in youths and men. Some studies report either no or a weak association between cadmium exposure and bone damage. Objectives: This study was designed to investigate the relationship between the urinary cadmium (U-Cd) levels and BMD of females and males of all ages. Methods: A total of 804 residents near an industrial complex were surveyed in 2007. U-Cd and BMD on the heel (non-dominant calcaneus) were analyzed with AAS-GTA and Dual-Energy X-ray absorptiometry, respectively. Demographic characteristics were collected by structured questionnaires. Osteoporosis and osteopenia were defined by BMD cut-off values and T-scores set by the WHO; T score>-1, normal; -2.5=}1.0 {mu}g/g creatinine) in females (OR=2.92; 95% CI, 1.51-5.64) and in males (OR=3.37; 95% CI, 1.09-10.38). With the multiple linear regression model, the BMD of the adult group was negatively associated with U-Cd (<0.05), gender (female, p<0.001) and age (p<0.001). The BMD of participants who were {<=}19 years of age was negatively associated with gender (female, p<0.01), whereas it was positively associated with age and BMI (p<0.001). BMD was not associated with exercise, smoking habits, alcohol consumption, job or parental education. Conclusion: Results suggested that U-Cd might be associated with osteopenia as well as osteoporosis in both male and female adults. Age and female gender were negatively associated with BMD in the adult group, whereas age was positively associated with BMD in the youth group. Cadmium exposure may be a potential risk factor for lower-BMD and osteopenia symptoms as well as for osteoporosis symptoms. - Research Highlights: {yields} The relationship between the urinary cadmium levels and BMD was investigated. {yields} U-Cd was associated with osteopenia and osteoporosis in adults. {yields} Cadmium exposure may be a potential risk factor for lower-BMD and osteopenia.

Shin, Minah; Paek, Domyung [Institute of Health and Environment, Department of Environmental Health, School of Public Health, Seoul National University, Gwanak-599, Gwanak-gu, Seoul 151-742 (Korea, Republic of)] [Institute of Health and Environment, Department of Environmental Health, School of Public Health, Seoul National University, Gwanak-599, Gwanak-gu, Seoul 151-742 (Korea, Republic of); Yoon, Chungsik, E-mail: csyoon@snu.ac.kr [Institute of Health and Environment, Department of Environmental Health, School of Public Health, Seoul National University, Gwanak-599, Gwanak-gu, Seoul 151-742 (Korea, Republic of)] [Institute of Health and Environment, Department of Environmental Health, School of Public Health, Seoul National University, Gwanak-599, Gwanak-gu, Seoul 151-742 (Korea, Republic of)

2011-01-15T23:59:59.000Z

44

Wellbore thermal simulation for geothermal wells. Survey of existing capability and industry needs and interest  

DOE Green Energy (OSTI)

Four operating companies and five service companies in the petroleum and geothermal industry were contacted (1) to determine needs for wellbore temperature predictions during operations and (2) to evaluate interest in use of a wellbore thermal simulator (computer program) if developed by ERDA. As a basis for contacting industry, a literature survey was undertaken to assess the state-of-the-art and availability of wellbore thermal simulation capability. The literature review is summarized in the four tables of Appendix 1. Written abstracts of the individual articles is given in Appendix 2. The feedback from industry is presented in Appendix 3 in the form of completed questionaires.

Goodman, M.A.

1977-06-01T23:59:59.000Z

45

Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report  

Science Conference Proceedings (OSTI)

Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

Azimi, S.A.; Conrad, J.L.; Reed, J.E.

1985-03-01T23:59:59.000Z

46

Gravity survey of the Cove Fort-Sulphurdale KGRA and the north Mineral Mountains area, Millard and Beaver Counties, Utah  

DOE Green Energy (OSTI)

During the summers of 1975 and 1976, a gravity survey was conducted in the Cove Fort-Sulphurdale KGRA and north Mineral Mountains area, Millard and Beaver Counties, Utah. The survey consisted of 671 gravity stations covering an area of about 1300 km{sup 2}, and included two orthogonal gravity profiles traversing the area. The gravity data are presented as a terrain-corrected Bouguer gravity anomaly map with a contour interval of 1 mgal and as an isometric three-dimensional gravity anomaly surface. Selected anomaly separation techniques were applied to the hand-digitized gravity data (at 1-km intervals on the Universal Transverse Mercator grid) in both the frequency and space domains, including Fourier decomposition, second vertical derivative, strike-filter, and polynomial fitting analysis, respectively.

Brumbaugh, W.D.; Cook, K.L.

1977-08-01T23:59:59.000Z

47

Goa, India Risk Assessment of Surface Miner for Estonian Oil Shale Mining Industry  

E-Print Network (OSTI)

The paper deals with risk assessment of a high-selective oil-shale mining technology using surface miner Wirtgen 2500SM. This study addresses risk associated with productivity and cutting quality on example of Estonian oil shale deposit in areas with complicated layering conditions. The risk assessment method allows choosing relevant technology with friendly environment and economic value. For risk estimation the event tree is used. The results of the risk assessment are of practical interest for different purposes. 1

S. Sabanov; J-r. Pastarus; O. Nikitin; E. Väli

2008-01-01T23:59:59.000Z

48

A Survey of LTR Program Industry Partner Satisfaction at Oak Ridge National Lab  

SciTech Connect

As a US Department of Energy (DOE) Office of Science (SC) National Laboratory, the Oak Ridge National Lab (ORNL) participates in the Laboratory Technology Research (LTR) Program. The mission of the LTR Program is to advance science and technology, in support of DOE missions, toward innovative applications through cost-shared partnerships with the private sector. The benefits to industry participants include gaining access to world-class researchers and facilities, while the benefits to the ORNL researchers includes leveraging the declining government-provided funds. Thus, the importance placed upon industry partner satisfaction is large, especially if the LTR Program is to be sustained during episodes of government budget constraints. Realizing the critical nature of partner satisfaction, in 1998 the DOE-SC National Laboratories surveyed industrial partners to assess their satisfaction with the cooperative research projects in which they were involved. This paper will describe the survey methodology including development of the questionnaire and a summary of the responses (particularly those which are germane to the ORNL.) The results of the survey will be categorized as follows: (1) Desire to partner again with ORNL; (2) Benefits obtained by the company from the partnership; and (3) LTR Program ratings assigned in 11 key areas (i.e., quality of work, expertise, protection of intellectual property, value, facilities, understanding company needs, reliability of funding, schedule responsiveness, project management, contract negotiation, and contract administration.) More information about the LTR Program can be found at http://www.er.doe.gov/production/octr/aentr/aeptrnr.html.

Payne, T.L.; Kniel, C.

2000-02-01T23:59:59.000Z

49

A Survey of the U.S. ESCO Industry: Market Growth and Development from 2008 to 2011  

E-Print Network (OSTI)

Evolution of the U.S. Energy Service Company Industry: NewAn international survey of the energy service company (ESCO)Association of Energy Service Companies Environmental Energy

Satchwell, Andrew

2010-01-01T23:59:59.000Z

50

Industry  

E-Print Network (OSTI)

from refrigeration equipment used in industrial processesfrom refrigeration equipment used in industrial processesfrom refrigeration equipment used in industrial processes

Bernstein, Lenny

2008-01-01T23:59:59.000Z

51

Tax and Fiscal Policies for Promotion of Industrial EnergyEfficiency: A Survey of International Experience  

SciTech Connect

The Energy Foundation's China Sustainable Energy Program (CSEP) has undertaken a major project investigating fiscal and tax policy options for stimulating energy efficiency and renewable energy development in China. This report, which is part of the sectoral sub-project studies on energy efficiency in industry, surveys international experience with tax and fiscal policies directed toward increasing investments in energy efficiency in the industrial sector. The report begins with an overview of tax and fiscal policies, including descriptions and evaluations of programs that use energy or energy-related carbon dioxide (CO2) taxes, pollution levies, public benefit charges, grants or subsidies, subsidized audits, loans, tax relief for specific technologies, and tax relief as part of an energy or greenhouse gas (GHG) emission tax or agreement scheme. Following the discussion of these individual policies, the report reviews experience with integrated programs found in two countries as well as with GHG emissions trading programs. The report concludes with a discussion of the best practices related to international experience with tax and fiscal policies to encourage investment in energy efficiency in industry.

Price, Lynn; Galitsky, Christina; Sinton, Jonathan; Worrell,Ernst; Graus, Wina

2005-09-15T23:59:59.000Z

52

RADIOACTIVE WASTE DISPOSAL PRACTICES IN THE ATOMIC ENERGY INDUSTRY. A Survey of the Costs  

SciTech Connect

A survey was made on methcds and related costs of disposing of radioactive wastes as practiced in 1955 by twelve atomic industry installations. Wherever possible, estimated unit costs of differentiated stages of waste handling are shown- these are integrated to show the over-all scope of waste dispesal practices at each site. Tabular data summarize costs and operation magnitades at the installations. A pattern is established for standardizing the reporting of fixed costs and equipment unsage costs. The economy of solid waste volume reduction is analyzed. Material costs are listed. An outline for recording monthly waste disposal costs is presented. Obvious conclusions drawn from the factual data are: that it is more expensive per cubic foot to handle high-level wastes than low-level wastes. and that land disposal is less expenaive than sea disposal. A reexamination of baling economics shows that high compression of solid wastes is more expensive than simpler forms of compaction. (auth)

Joseph, A.B.

1955-12-31T23:59:59.000Z

53

Mapping evaporate minerals by ASTER  

Science Conference Proceedings (OSTI)

Evaporate minerals are important industrial raw materials that have been used in diverse industries for many years. As one of the most extensively used evaporate minerals, gypsum is an important raw material in the construction, agriculture, textile, ...

N. Serkan Oztan; M. Lutfi Suzen

2011-03-01T23:59:59.000Z

54

Industry  

E-Print Network (OSTI)

in the iron and steel industry: a global model. Energy, 30,report of the world steel industry 2005. International Irontrends in the iron and steel industry. Energy Policy, 30,

Bernstein, Lenny

2008-01-01T23:59:59.000Z

55

Industry  

E-Print Network (OSTI)

and power in US industry. Energy Policy, 29, pp. 1243-1254.Paris. IEA, 2004: Energy Policies of IEA Countries: Finlandand steel industry. Energy Policy, 30, pp. 827-838. Kim, Y.

Bernstein, Lenny

2008-01-01T23:59:59.000Z

56

3rd International Conference on Sustainable Development Indicators 73 in the Minerals Industry, June 2007, Milos island, Greece  

E-Print Network (OSTI)

philosophy. Continued production of minerals and fossil energy fuels may not fit into commonly under- stood dominating the energy mix. US electricity generation relies heavily on fossil fu- els. Coal is the dominant to be a crucial element in a modern, bal- anced energy portfolio, providing a bridge to the future as an important

57

Gravity survey of the Cove Fort-Sulphurdale KGRA and the North Mineral Mountains area, Millard and Beaver Counties, Utah. Technical report: Volume 77-4  

DOE Green Energy (OSTI)

During the summers of 1975 and 1976, a gravity survey was conducted in the Cove Fort-Sulphurdale KGRA and north Mineral Mountains area, Millard and Beaver Counties, Utah. The survey consisted of 671 gravity stations covering an area of about 1300 km/sup 2/, and included two orthogonal gravity profiles traversing the area. The gravity data are presented as a terrain-corrected Bouguer gravity anomaly map with a contour interval of 1 mgal and as an isometric three-dimensional gravity anomaly surface. Selected anomaly separation techniques were applied to the hand-digitized gravity data (at 1-km intervals on the Universal Transverse Mercator grid) in both the frequency and space domains, including Fourier decomposition, second vertical derivative, strike-filter, and polynomial fitting analysis, respectively.

Brumbaugh, W.D.; Cook, K.L.

1977-08-01T23:59:59.000Z

58

Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and...

59

Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

An Exploration of Innovation and An Exploration of Innovation and Energy Efficiency in an Appliance Industry Prepared by Margaret Taylor, K. Sydny Fujita, Larry Dale, and James McMahon For the European Council for an Energy Efficient Economy March 29, 2012 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY LBNL - 5689E An Exploration of Innovation and Energy Efficiency in an Appliance Industry Abstract This report provides a starting point for appliance energy efficiency policy to be informed by an understanding of: the baseline rate and direction of technological change of product industries; the factors that underlie the outcomes of innovation in these industries; and the ways the innovation system might respond to any given intervention. The report provides an overview of the dynamics of energy efficiency policy and innovation in the appliance

60

Industry  

E-Print Network (OSTI)

milling industry: An ENERGY STAR Guide for Energy and Plantcement mak- ing - An ENERGY STAR Guide for Energy and Plantre- fineries - An ENERGY STAR Guide for Energy and Plant

Bernstein, Lenny

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Minerals on Public Lands (Texas) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Minerals on Public Lands (Texas) Minerals on Public Lands (Texas) Minerals on Public Lands (Texas) < Back Eligibility Utility Fed. Government Commercial Investor-Owned Utility Industrial Construction Municipal/Public Utility Local Government Rural Electric Cooperative Tribal Government Program Info State Texas Program Type Siting and Permitting Provider Texas General Land Office Any tract of land that belongs to the state, including islands, salt and freshwater lakes, bays, inlets, marshes, and reefs owned by the state within tidewater limits, the part of the Gulf of Mexico within the state's jurisdiction, unsold surveyed public school land, rivers and channels that belong to the state, and land sold with a reservation of minerals to the state are subject to prospect by any person for those minerals which are

62

Industry  

Science Conference Proceedings (OSTI)

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01T23:59:59.000Z

63

Tax and Fiscal Policies for Promotion of Industrial Energy Efficiency: A Survey of International Experience  

E-Print Network (OSTI)

IEA), 2004b. Renewable Energy Policy Review, Sweden. Paris:and Challenges,” Energy Policy, Vol. 26, No. 11: 813-829.in Chinese Industry," Energy Policy 22 pp.239 255. Sinton,

Price, Lynn; Galitsky, Christina; Sinton, Jonathan; Worrell, Ernst; Graus, Wina

2005-01-01T23:59:59.000Z

64

Survey of Instrumentation and Control Practices in the Process Industries for Application to the Power Utilities  

Science Conference Proceedings (OSTI)

With impending deregulation and ever-tightening environmental constraints, utilities are increasing their emphasis on maximizing operating efficiency and reducing maintenance and operational costs. It is likely that utilities can use the capabilities of modern control and information management systems more effectively than they currently do. This report documents lessons learned over many years by experts in the process industries that might benefit the utility industry as it transitions to a competitiv...

1999-04-08T23:59:59.000Z

65

Industry Survey and Assessment of Available Corrosion Mitigation Technologies: 20th Century State of the Art  

Science Conference Proceedings (OSTI)

This report summarizes the findings of searching various industry databases and soliciting information from suppliers regarding available corrosion detection of mitigation technologies. The focus of the search was for methods that can mitigate, detect, or monitor corrosion on pipe-type cable systems; methods appropriate for submarine cables were also considered. Special attention was given to new corrosion technologies or the application of different technologies from associated industries. Information w...

2000-03-31T23:59:59.000Z

66

Independent Mineral Processing Project Technical Due Diligence  

Science Conference Proceedings (OSTI)

Presentation Title, Independent Mineral Processing Project Technical Due Diligence ... CRIMM Energy-saving Magnetic Separation Equipment and Industrial ...

67

C. KIMBLE & V. B. PRABHU -CIM and Manufacturing Industry in the North East of England: a Survey of some Current Issues in Ergonomics of Advanced Manufacturing  

E-Print Network (OSTI)

C. KIMBLE & V. B. PRABHU - CIM and Manufacturing Industry in the North East of England: a Survey. Pub Elsevier publications, 1988, pp 133 - 140. ISBN 0 444 70486 8 CIM AND MANUFACTURING INDUSTRY and the computer technologies it uses. One label often applied to this approach is CIM (Computer Integrated

Kimble, Chris

68

Electricity in lieu of nautral gas and oil for industrial thermal energy: a preliminary survey  

SciTech Connect

In 1974, industrial processors accounted for nearly 50% of the nation's natural gas consumption and nearly 20% of its consumption of petroleum. This report is a preliminary assessment of the potential capability of the process industries to substitute utility-generated electricity for these scarce fuels. It is tacitly assumed that virtually all public utilities will soon be relying on coal or nuclear fission for primary energy. It was concluded that the existing technology will permit substitution of electricity for approximately 75% of the natural gas and petroleum now being consumed by industrial processors, which is equivalent to an annual usage of 800 million barrels of oil and 9 trillion cubic feet of gas at 1974 levels. Process steam generation, used throughout industry and representing 40% of its energy usage, offers the best near-term potential for conversion to electricity. Electric boilers and energy costs for steam are briefly discussed. Electrically driven heat pumps are considered as a possible method to save additional low-grade energy. Electrical reheating at high temperatures in the primary metals sector will be an effective way to conserve gas and oil. A wholesale shift by industry to electricity to replace gas and oil will produce impacts on the public utilities and, perhaps, those of a more general socio-economic nature. The principal bar to large-scale electrical substitution is economics, not technology. 174 references.

Tallackson, J. R.

1979-02-01T23:59:59.000Z

69

Daylighting practices of the architectural industry (baseline results of a national survey)  

DOE Green Energy (OSTI)

A national survey of over 300 commercial design architects was conducted to develop baseline information on their knowledge, perceptions, and use of daylighting in commercial building designs. Pacific Northwest Laboratory conducted the survey for the US Department of Energy's (DOE) Office of Building and Community Systems (BCS). In the survey daylighting was defined as the intentional use of natural light as a partial substitute for artificially generated light. The results suggested that architects need to be educated about the true benefits of daylighting and the impacts it can have on a building's energy performance. Educational programs that will increase the architects' understanding and awareness of modern daylighting technologies and practices should be developed by utilities, stage agencies, and the federal government. If more architects can be made aware of the true effectiveness and positive attributes of daylighting systems and technologies, daylighting may be used in more commercial buildings. The results of the survey show that the more familiar architects feel they are with daylighting, the more they use daylighting. 3 refs., 19 tabs.

Hattrup, M.P.

1990-05-01T23:59:59.000Z

70

National survey of industrial markets for steam produced from burning municipal solid waste  

DOE Green Energy (OSTI)

This report presents the methodology and findings of an analysis to determine the maximum size of the industrial market for steam produced from municipal solid waste in the United States. The data used in the analysis were developed from the 1980 census report and the US Chamber of Commerce's 1979 Standard Industrial Classification (SIC) listing. The process used to match potential steam users with populations large enough to generate suitable quantities of waste is presented. No attempt was made to rank the markets or analyze the market economics.

Pearson, C.V.

1983-09-01T23:59:59.000Z

71

Invited Review: Industrial aspects and literature survey: Combined inventory management and routing  

Science Conference Proceedings (OSTI)

This paper describes industrial aspects of combined inventory management and routing in maritime and road-based transportation, and gives a classification and comprehensive literature review of the current state of the research. The literature is contrasted ... Keywords: Inventory management, Inventory routing, Vehicle routing

Henrik Andersson; Arild Hoff; Marielle Christiansen; Geir Hasle; Arne Løkketangen

2010-09-01T23:59:59.000Z

72

Industrial  

Gasoline and Diesel Fuel Update (EIA)

Industrial Industrial 8,870,422 44.3% Commercial 3,158,244 15.8% Electric Utilities 2,732,496 13.7% Residential 5,241,414 26.2% Source: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition." T e x a s L o u i s i a n a C a l i f o r n i a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Industrial Billion Cubic Meters T e x a s C a l i f o r n i a F l o r i d a A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Electric Utilities Billion Cubic Meters N e w Y o r k C a l i f o r n i a I l l i n o i s A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Commercial Billion Cubic Meters I l l i n o i s C a l i f o r n i a N e w Y o r k A l l O t h e r S t a t e s 0 1 2 3 4 5 0 30 60 90 120 Trillion Cubic Feet Residential Billion Cubic Meters 11. Natural Gas Delivered to Consumers in the United States, 1996 Figure Volumes in Million Cubic Feet Energy Information Administration

73

Industry-Wide Error Rate Database in Power Switching: Switching Practices Survey  

Science Conference Proceedings (OSTI)

This report describes a survey that was conducted in 2013 to collect data on utility practices in operational power switching and on rates of switching errors. Over the years, the Electric Power Research Institute (EPRI) Switching Safety and Reliability (SS&R) project has developed two previous estimates of switching errors. These estimates were derived as part of research reported in the 1996 EPRI report Field Operation Power Switching Safety (TR-106465) and in the 2000 EPRI report ...

2013-11-19T23:59:59.000Z

74

A utility survey and market assessment on repowering in the electric power industry  

SciTech Connect

Section 1 of this report provides a background about the DOE High Performance Power Systems (HIPPS) program. There are two kinds of HIPPS cycles under development. One team is led by the Foster Wheeler Development Corporation, the other team is led by the United Technologies Research Center. These cycles are described. Section 2 summarizes the feedback from the survey of the repowering needs of ten electric utility companies. The survey verified that the utility company planners favor a repowering for a first-of-a-kind demonstration of a new technology rather than an all-new-site application. These planners list the major factor in considering a unit as a repowering candidate as plant age: they identify plants built between 1955 and 1965 as the most likely candidates. Other important factors include the following: the need to reduce operating costs; the need to perform major maintenance/replacement of the boiler; and the need to reduce emissions. Section 3 reports the results of the market assessment. Using the size and age preferences identified in the survey, a market assessment was conducted (with the aid of a power plant data base) to estimate the number and characteristics of US generating units which constitute the current, primary potential market for coal-based repowering. Nearly 250 units in the US meet the criteria determined to be the potential repowering market.

Klara, J.M. [USDOE Pittsburgh Energy Technology Center, PA (United States); Weinstein, R.E. [Parsons Power Group Inc., Reading, PA (United States); Wherley, M.R. [Science Applications International Corp., Reston, VA (United States)

1996-08-01T23:59:59.000Z

75

U.S. Geological Survey Data Series 140 | Open Energy Information  

Open Energy Info (EERE)

Geological Survey Data Series 140 Geological Survey Data Series 140 Jump to: navigation, search Name U.S. Geological Society Data Series 140 Data Format Excel Spreadsheets Geographic Scope United States TODO: Import actual dataset contents into OpenEI "The US Minerals Databrowser (USGS DS140) is a collection of Excel spreadsheets which contain United States' historical consumption, production, imports and exports of various minerals. [1] It is produced by the United States Geological Survey. Many of the minerals it covers are important to the energy industry. Data from DS140 is used in various tools, including the US Minerals Databrowser.[2]" References ↑ "USGS DS140 Homepage" ↑ "US Minerals Databrowser" Retrieved from "http://en.openei.org/w/index.php?title=U.S._Geological_Survey_Data_Series_140&oldid=381562"

76

Lost circulation in geothermal wells: survey and evaluation of industry experience  

DOE Green Energy (OSTI)

Lost circulation during drilling and completion of geothermal wells can be a severe problem, particularly in naturally fractured and/or vugular formations. Geothermal and petroleum operators, drilling service companies, and independent consultants were interviewed to assess the lost circulation problem in geothermal wells and to determine general practices for preventing lost circulation. This report documents the results and conclusions from the interviews and presents recommendations for needed research. In addition, a survey was also made of the lost circulation literature, of currently available lost circulation materials, and of existing lost circulation test equipment.

Goodman, M.A.

1981-07-01T23:59:59.000Z

77

Survey of industrial coal conversion equipment capabilities: high-temperature, high-pressure gas purification  

SciTech Connect

In order to ensure optimum operating efficiencies for combined-cycle electric generating systems, it is necessary to provide gas treatment equipment capable of operating at high temperatures (>1000/sup 0/F) and high pressure (>10 atmospheres absolute). This equipment, when assembled in a process train, will be required to condition the inlet stream to a gas turbine to suitable levels of gas purity (removal of particulate matter, sulfur, nitrogen, and alkali metal compounds) so that it will be compatible with both environmental and machine constraints. In this work, a survey of the available and developmental equipment for the removal of particulate matter and sulfur compounds has been conducted. In addition, an analysis has been performed to evaluate the performance of a number of alternative process configurations in light of overall system needs. Results from this study indicate that commercially available, reliable, and economically competitive hot-gas cleanup equipment capable of conditioning raw product gas to the levels required for high-temperatue turbine operation will not be available for some time.

Meyer, J. P.; Edwards, M. S.

1978-06-01T23:59:59.000Z

78

“Critical Minerals Policy Act” (S. 1113)  

Science Conference Proceedings (OSTI)

Jul 23, 2012 ... surveys and production to research and recycling – and, in particular, to see that additional critical mineral supplies can ... Exploration. Strategic ...

79

Fluidization Technologies for the Mineral, Materials, and Energy ...  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, 2014 TMS Annual Meeting & Exhibition. Symposium, Fluidization Technologies for the Mineral, Materials, and Energy Industries.

80

Introducing International Minerals Innovation Institute of Saskatchewan  

Science Conference Proceedings (OSTI)

Cross Pollination between Industry and Engineering Programs/Students in Manitoba · Improving the Health & Performance of Miners Working at Moderate to

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Mineral Processing Technology Development—Challenges and ...  

Science Conference Proceedings (OSTI)

Cross Pollination between Industry and Engineering Programs/Students in Manitoba · Improving the Health & Performance of Miners Working at Moderate to

82

Manufacturing Energy Consumption Survey (MECS) - Analysis & Projections -  

Gasoline and Diesel Fuel Update (EIA)

Manufacturing Energy Consumption Survey (MECS) Manufacturing Energy Consumption Survey (MECS) Glossary › FAQS › Overview Data 2010 2006 2002 1998 1994 1991 Archive Analysis & Projections MECS Industry Analysis Briefs Steel Industry Analysis The steel industry is critical to the U.S. economy. Steel is the material of choice for many elements of construction, transportation, manufacturing, and a variety of consumer products. It is the backbone of bridges, skyscrapers, railroads, automobiles, and appliances. Most grades of steel used today - particularly high-strength steels that are lighter and more versatile - were not available a decade ago. Chemical Industry Analysis The chemical industries are a cornerstone of the U.S. economy, converting raw materials such as oil, natural gas, air, water, metals, and minerals

83

Industrial Buildings  

U.S. Energy Information Administration (EIA) Indexed Site

Industrial Industrial Industrial / Manufacturing Buildings Industrial/manufacturing buildings are not considered commercial, but are covered by the Manufacturing Energy Consumption Survey (MECS). See the MECS home page for further information. Commercial buildings found on a manufacturing industrial complex, such as an office building for a manufacturer, are not considered to be commercial if they have the same owner and operator as the industrial complex. However, they would be counted in the CBECS if they were owned and operated independently of the manufacturing industrial complex. Specific questions may be directed to: Joelle Michaels joelle.michaels@eia.doe.gov CBECS Manager Release date: January 21, 2003 Page last modified: May 5, 2009 10:18 AM http://www.eia.gov/consumption/commercial/data/archive/cbecs/pba99/industrial.html

84

Soil Minerals  

NLE Websites -- All DOE Office Websites (Extended Search)

Soil Minerals Soil Minerals Nature Bulletin No. 707 March 2, 1963 Forest Preserve District of Cook County Seymour Simon, President Roberts Mann, Conservation Editor SOIL MINERALS We all depend upon the land Our food is obtained from plants and animals -- bread and meat, potatoes and fish, fruit and eggs and milk and the rest of it. Our livestock feed on plants and plant products such as grass and grain. Plants, by means of their root systems, take moisture and nutrients from the soils on which they grow. Their food values, for us or for animals that furnish us food, depend upon the available nutrients in those soils. Soils contain solids, water and air. The solids, the bulk of a soil -- except in purely organic types such as peat and muck -- are mostly mineral materials. Ordinarily they also contain some organic material: decayed and decaying remains of plants and animals.

85

A Survey of the U.S. ESCO Industry: Market Growth and Development from 2008 to 2011  

SciTech Connect

In this study, LBNL analyzes the current size of the Energy Service Company (ESCO) industry, industry growth projections to 2011, and market trends in order to provide policymakers with a more indepth understanding of energy efficiency activity among private sector firms. We draw heavily on information from interviews with ESCOs conducted from October 2009 to February 2010 and from our review of publicly available financial information regarding individual ESCOs. A significant ramp-up in energy efficiency activities is occurring at the local, state, and federal level. These activities include the establishment in {approx}18 states of statewide energy savings goals to be obtained from adoption of an Energy Efficiency Resource Standard (EERS), legislative or state regulatory directives to obtain all cost-effective demand-side resources (Barbose et al 2009), and a significant increase in federal funding for energy efficiency programs as part of the American Recovery and Reinvestment Act (ARRA). As part of this increased focus on energy efficiency, policymakers are evaluating the role of private sector companies, including ESCOs, in delivering cost-effective energy savings to end-users. The U.S. ESCO industry has long been recognized for its role in successfully delivering comprehensive energy projects in the public sector. This study analyzes the current size of the ESCO industry, industry growth projections, and market trends in order to provide policymakers with a more in-depth understanding of energy efficiency activity among private sector firms. This study may also be of interest to policymakers abroad who are exploring options to encourage development of a private-sector energy services industry in their own countries. This study draws heavily on information from interviews with ESCOs conducted from October 2009 to February 2010 and is part of a series of ESCO industry reports prepared by Lawrence Berkeley National Laboratory (LBNL) in collaboration with the National Association of Energy Services Companies (NAESCO). The analysis builds on previous ESCO industry reports (see Goldman et al. 2005 and Hopper et al. 2007) and provides updated estimates of ESCO industry revenues and ESCO views on perceived trends in costs and savings.

Satchwell, Andrew; Goldman, Charles; Larsen, Peter; Gilligan, Donald; Singer, Terry

2010-06-08T23:59:59.000Z

86

State of the Art of Artificial Intelligence and Predictive Analytics in the E&P Industry: A Technology Survey  

E-Print Network (OSTI)

) production management, (5) process control, (6) filtering/cleaning data, and (7) virtual metering and event/Cleansing Data VirtualMetering& Events recognition FaultDetection SurfaceFacility Modeling& Simulation related to several E&P operations and service companies is presented. This survey captures the level of AI

Mohaghegh, Shahab

87

Bioleaching of Minerals  

Science Conference Proceedings (OSTI)

Bioleaching is the term used to describe the microbial dissolution of metals from minerals. The commercial bioleaching of metals, particularly those hosted in sulfide minerals, is supported by the technical disciplines of biohydrometallurgy, hydrometallurgy, pyrometallurgy, chemistry, electrochemistry, and chemical engineering. The study of the natural weathering of these same minerals, above and below ground, is also linked to the fields of geomicrobiology and biogeochemistry. Studies of abandoned and disused mines indicate that the alterations of the natural environment due to man's activities leave as remnants microbiological activity that continues the biologically mediated release of metals from the host rock (acid rock drainage; ARD). A significant fraction of the world's copper, gold and uranium is now recovered by exploiting native or introduced microbial communities. While some members of these unique communities have been extensively studied for the past 50 years, our knowledge of the composition of these communities, and the function of the individual species present remains relatively limited. Nevertheless, bioleaching represents a major strategy in mineral resource recovery whose importance will increase as ore reserves decline in quality, become more difficult to process (due to increased depth, increased need for comminution, for example), and as environmental considerations eliminate traditional physical processes such as smelting, which have served the mining industry for hundreds of years.

F. Roberto

2002-02-01T23:59:59.000Z

88

Shadow Algorithm References Not Covered in the "Shadow Algorithms Data Miner" Book -P. 5 include as reference for survey of shadow volume algorithms: "Combining cutting edge  

E-Print Network (OSTI)

, 2012. http://www.cspaul.com/publications/Rosen.2012.I3D.pdf - Section 2.3.7 ­ "Improved Ray HierarchyBA&usg=AFQjCNFKeUWA1zjkFvL95WubOMvB2iMMzA - Section 2.4.3 ­ "Real-time shadow using a combination of stencil and the z as reference for survey of shadow volume algorithms: "Combining cutting edge shadow volume algorithms: using

Montréal, Université de

89

Improving the Health & Performance of Miners Working at Moderate ...  

Science Conference Proceedings (OSTI)

Cross Pollination between Industry and Engineering Programs/Students in Manitoba · Improving the Health & Performance of Miners Working at Moderate to

90

Climate VISION: Private Sector Initiatives: Minerals: GHG Inventory...  

Office of Scientific and Technical Information (OSTI)

GHG Inventory Protocols Read the Industrial Minerals Association - North America (IMA-NA) Borates and Soda Ash Sections Greenhouse Gas Inventory Protocol (PDF 75 KB) Download...

91

Climate VISION: PrivateSector Initiatives: Minerals - Resources...  

Office of Scientific and Technical Information (OSTI)

of IntentAgreements Work Plans GHG Information GHG Inventory Protocols Resources & Links Energy Management Industry Associations Software Tools Results Minerals - Resources &...

92

DOE - Office of Legacy Management -- International Minerals and Chemicals  

NLE Websites -- All DOE Office Websites (Extended Search)

and and Chemicals Corp - Bonnie Mill Plant - FL 03 FUSRAP Considered Sites Site: International Minerals and Chemicals Corp., Bonnie Mill Plant (FL.03) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: CF Industries Bonnie Uranium Plant FL.03-2 Location: Approximately 2 miles south of Highway 60 between Mulberry and Bartow , Bartow , Florida FL.03-2 Evaluation Year: 1985 FL.03-2 Site Operations: Recovered uranium concentrates from phosphate solutions produced at this plant. FL.03-2 Site Disposition: Eliminated - No Authority FL.03-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium FL.03-2 Radiological Survey(s): Yes FL.03-4 Site Status: Eliminated from consideration under FUSRAP

93

Industrial-hygiene survey report of General Electric Company, Albuquerque, New Mexico, April 18-24, 1989  

Science Conference Proceedings (OSTI)

A walk through survey was conducted at the General Electric Company (SIC-3079), located in Albuquerque, New Mexico, to obtain information on the extent of exposure to 4,4{prime}-methylenedianiline (101779) (MDA) during hand layup work with preimpregnated graphite fabric while making molded jet engine parts, to obtain information on the elimination of MDA in the urine of potentially exposed workers, and to identify deficiencies in the handling of MDA and to offer recommendations for improving worker protection. A total of 210 worker urine samples was taken. Other samples taken included air samples, samples of glove washings, surface wipe samples, shoe samples, and bulk samples. From the data obtained it was possible to estimate the primary sources of exposure and their relative importance. Comparing the mass of airborne MDA inhaled with the amounts measured in the urine the following day suggested that skin contact was a significant contributory route of exposure. The author states that further efforts should therefore be made to reduce this exposure. Such efforts would include the selection of better personal protective equipment and improved work practices. Possible engineering modifications would be limited due to the manual nature of the work involved.

Boeniger, M.F.

1990-12-01T23:59:59.000Z

94

Opportunities for Energy Efficiency and Demand Response in the California Cement Industry  

E-Print Network (OSTI)

Applications in the Cement Industry. ” Mineral Engineering Cement  Production,” Cement Industry Technical Conference, gearless mill drive,” Cement Industry Technical Conference, 

Olsen, Daniel

2012-01-01T23:59:59.000Z

95

Yemen Ministry of Oil and Minerals | Open Energy Information  

Open Energy Info (EERE)

Yemen Ministry of Oil and Minerals Yemen Ministry of Oil and Minerals Jump to: navigation, search Logo: Yemen Ministry of Oil and Minerals Country Yemen Name Yemen Ministry of Oil and Minerals Website http://www.mom.gov.ye/en/ References Yemen Ministry of Oil and Minerals Website[1] The Yemen Ministry of Oil and Minerals Website contains some content in English. Associated Organizations Yemeni Company for Oil-Product Distribution Petroleum Exploration and Production Authority Safr Company for Scouting Production Operations Organization of Oil Scouting Aden Refinery Company Yemen Company for Oil Refining Yemen Investments Company for Oil & Mineral Geological Land Survey & Mineral Wealth Organization References ↑ "Yemen Ministry of Oil and Minerals Website" Retrieved from "http://en.openei.org/w/index.php?title=Yemen_Ministry_of_Oil_and_Minerals&oldid=334954"

96

Mining and minerals policy: 1976 bicentennial edition  

DOE Green Energy (OSTI)

The report is organized into three basic parts. The first part, the Executive Summary, provides a brief description of the major topics and lists the issues and recommendations. The report then is divided into two sections. Section I, Summary, is comprised of three chapters: Increased Energy Security; Metals and Nonmetallic Minerals; and Trends and Events. Section II, Issues in Energy and Minerals Policy, is comprised of seven chapters: Federal Leasing; The Federal Role in Reducing the Fiscal Impacts of Energy Development; Availability of Federal Lands for Mineral Exploration and Development; Environmental Issues and the Mineral Industry; Developments in International Minerals Trade and Investment; Ocean Mining; and The Development of New Tools for Energy and Minerals Policy Analysis. (MCW)

Not Available

1976-07-01T23:59:59.000Z

97

Uranium industry annual 1998  

SciTech Connect

The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

NONE

1999-04-22T23:59:59.000Z

98

waste recycling in mineral and metallurgical industries  

Science Conference Proceedings (OSTI)

A Computer Simulation of an Agitation Mill Abrasion Process for Waste Printed ... Effect of Electricity Mix and Ore Grade on the Carbon Footprint of Chilean ...

99

Salary Survey Top Industries | Individual  

E-Print Network (OSTI)

to graduation. The new report contains more data, and the data are more robust, allowing for additional analysis additional changes: First, in the past, the Winter report had been the first report for the new year's class the most new graduates of a particular major. (example: average salary that manufacturing firms

Miami, University of

100

Quarterly minerals outlook, June 1983  

Science Conference Proceedings (OSTI)

An overview is presented of the mineral industry of Wyoming. Petroleum production shows a slight annual decline. Many producers have been shutting in their natural gas wells due to the sharp decline in demand. Activities in the base, precious, and ferrous metals industry are summarized. Uranium and trona production is down from the previous year. Other minerals mentioned are gypsum, limestone, bentonite, and phosphorus. Production of coal is given by county. Electric utilities have not used all the coal they bought last year, and construction of several power plants have been delayed indefinitely. Underground coal gasification projects are mentioned. Tables present production forecasts for coal to 1990, for oil and gas to 1988, and for uranium and trona to 1987. 5 tables.

Glass, G.B.

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Wyoming mineral development monitoring system  

Science Conference Proceedings (OSTI)

The monitoring system covers, or will cover, all segments of the mineral industry except oil and gas exploration under one of eight main sections: coal uranium, bentonite, power plants, refineries, gas plants, synthetic fuels, trona, and others. Projects are grouped alphabetically by county and indexed by county, commodity, and company. Index maps all the location of projects within the state. A notebook format allows easy updating of information on ownership, production, numbers of employees, contracts, etc.

Not Available

1984-01-01T23:59:59.000Z

102

Uranium industry annual 1994  

SciTech Connect

The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

NONE

1995-07-05T23:59:59.000Z

103

Absorbents for Mineral Oil Spill Cleanup  

Science Conference Proceedings (OSTI)

Residual mineral oil on the ground surface following electrical equipment spills is often removed using a surface application of an absorbent material. Traditional absorbent products include clays, sawdust-like products, silica-based products, and various organic industry byproduct materials. After the material has had time to absorb the mineral oil on the ground surface, it is removed and normally sent to a landfill with a liner and leachate collection system designed to Subtitle D standards for municip...

2011-08-23T23:59:59.000Z

104

Table Commercial Industrial Vehicle Fuel Electric Power  

U.S. Energy Information Administration (EIA)

State Residential Commercial Industrial Vehicle Fuel Electric Power ... Form EIA?886, “Annual Survey of Alternative Fueled Vehicles”; ...

105

Boost Process Heating Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)  

Science Conference Proceedings (OSTI)

This fact sheet describes how the Industrial Technologies Program Process Heating Assessment and Survey Tool (PHAST) can help industrial plants indentify opportunities to save energy.

Not Available

2008-12-01T23:59:59.000Z

106

Poultry Industry: Industry Brief  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) Industry Brief provides an overview of the U.S. poultry industry and ways in which electric-powered processes and technologies can be used in poultry and egg production and processing. The poultry industry, which consists of poultry production for meat as well as egg production and processing, is one of the fastest growing segments of the U.S. food manufacturing industry. It is also an energy-intensive industry. In fact, a 2010 report by the USDA illustrates ...

2011-03-30T23:59:59.000Z

107

Two-Phase Liquid Dielectrics - Industrial Partnerships Office  

Industry uses liquid dielectrics for a number of applications. For example, Mineral oil is used extensively inside electrical transformers as a fluid dielectric and ...

108

Uranium industry annual 1995  

SciTech Connect

The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

NONE

1996-05-01T23:59:59.000Z

109

Characterization of Minerals  

Science Conference Proceedings (OSTI)

Mar 7, 2013 ... A Minimum Pollution, Low Energy Process for the Recovery of Cobalt and Copper from Complex Sulphide Minerals: Yotamu Hara1; 1Leeds ...

110

Mineral and water resources of Nevada  

SciTech Connect

The mineral and water resources of Nevada are summarily described in this report. Following a general description of the mineral industry and of the geology of the State as a whole, the occurrence, distribution, and relative importance of individual commodities are discussed in some detail. All mineral commodities are described that are known to occur in Nevada and that might have economic significance in the foreseeable future, whether or not they have been mined. In the description of the geology of the State, a section on economic geology describes the distribution of the metallic and nonmetallic mineral deposits both areally and with respect to the general geologic features. A knowledge of the pattern of distribution of known mineral deposits of various types is essential to the successful search for new ore bodies. A section on mineral exploration discusses the methods and problems of exploration, and also considers which commodities in Nevada offer the greatest promise of new discoveries in the future. Water resources are described rather fully in this report; water in this generally arid part of the Great Basin is vital to the economy of the State and to the well-being of its people. Sources of waterpower and geothermal power are also discussed. (auth)

1974-01-01T23:59:59.000Z

111

Figure 2. Energy Consumption of Vehicles, Selected Survey Years  

U.S. Energy Information Administration (EIA) Indexed Site

Home > Households, Buildings & Industry >Transportation Surveys > Household Vehicles Energy Use > Figure 2 Figure 2. Energy Consumption of Vehicles, Selected Survey Years...

112

Mineral Test Hole Regulatory Act (Tennessee) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mineral Test Hole Regulatory Act (Tennessee) Mineral Test Hole Regulatory Act (Tennessee) Mineral Test Hole Regulatory Act (Tennessee) < Back Eligibility Commercial Construction Developer Fuel Distributor Industrial Installer/Contractor Investor-Owned Utility Municipal/Public Utility Utility Program Info State Tennessee Program Type Environmental Regulations Siting and Permitting Provider Tennessee Department Of Environment and Conservation The Mineral Hole Regulatory Act is applicable to any person (individual, corporation, company, association, joint venture, partnership, receiver, trustee, guardian, executor, administrator, personal representative or private organization of any kind) who wishes to drill a mineral test hole (any hole in excess of one hundred (100) feet drilled during the exploration for minerals but shall exclude auger drilling in surficial or

113

Fluidization Technologies for the Mineral, Materials, and Energy ...  

Science Conference Proceedings (OSTI)

Fluidized Bed Applications for the Minerals Industry and Renewable Energy: Marcus ... adaptation and scale-up to meet specific customer/market requirements. ... In the course of developing a new industrial process, information produced at the ... Chemical analysis of the reduced ore sample, the metal sample and the slag ...

114

Formaldehyde-exposure characterization in garment-manufacturing plants: a composite summary of three in-depth industrial-hygiene surveys  

SciTech Connect

The extent of exposure to formaldehyde was investigated at three garment manufacturing facilities using fabrics pretreated with a formaldehyde-based resin system. Two of the facilities (in Georgia) operated on a two-shift basis with approximately 1000 and 500 workers; one facility (in Pennsylvania) operated on a one-shift basis and had approximately 600 workers. The facilities cut and sewed men's dress shirts from treated fabric. Measured exposures to formaldehyde, respirable dust, and organic cleaning solvent vapors were all below the applicable American Conference of Governmental Industrial Hygienists Threshold Limit Values and Occupational Safety and Health Administration Permissible Exposure Limits.

Elliott, L.J.; Stayner, L.T.; Blade, L.M.; Halperin, W.; Keenlyside, R.

1987-01-01T23:59:59.000Z

115

Dairy Industry: Industry Brief  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) Industry Brief provides an overview of the U.S. dairy industry and ways in which electric-powered processes and technologies can be used in milk production and processing. Because of the different processes involved, the characteristics of energy consumption at milk production and processing facilities vary by facility. Most energy used in milk production is in the form of diesel fuel, followed by electricity and then by petroleum products such as gasoline an...

2011-03-30T23:59:59.000Z

116

Carbon Emissions: Food Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Food Industry Food Industry Carbon Emissions in the Food Industry The Industry at a Glance, 1994 (SIC Code: 20) Total Energy-Related Emissions: 24.4 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 6.6% Total First Use of Energy: 1,193 trillion Btu -- Pct. of All Manufacturers: 5.5% Carbon Intensity: 20.44 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 24.4 Net Electricity 9.8 Natural Gas 9.1 Coal 4.2 All Other Sources 1.3 Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998

117

Survey report: study of information/educational discussions with private industries and public institutions on the direct-heat utilization of geothermal energy  

DOE Green Energy (OSTI)

Results of a study of private and public institutions' responses to the proposed use of geothermal energy in the form of direct heat are summarized. This heat energy would be used as an alternate or supportive source for their process or other heat requirements. The summary includes information from over 75 personal contacts with firms in several categories. No attempt is made to reference specific data to any particular company. Although not necessarily confidential, some financial information concerning energy costs to profits was considered sensitive and is respected as such. The companies contacted are in the following categories: food processing--canning, drying, dehydration; chemicals; paper/wood-pulp processing; food machinery; horticulture; and dairy. The area covered in the study was from Seattle, Washington, to San Diego, California, during mid-1976. Industry's response varied from mild interest, as with corporations that had little or no knowledge of geothermal energy (and regard it as a new unproven science), to enthusiasm from corporations that employ their own energy departments. The study clearly indicated the need for a basic educational/promotional program and an operating demonstration project (industrial park) to prove economic feasibility and instill confidence in the potential of geothermal energy.

Davey, J.V.

1977-03-01T23:59:59.000Z

118

DOE - Office of Legacy Management -- Foote Mineral Co - PA 27  

NLE Websites -- All DOE Office Websites (Extended Search)

Foote Mineral Co - PA 27 Foote Mineral Co - PA 27 FUSRAP Considered Sites Site: Foote Mineral Co. (PA.27 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Exton , Pennsylvania PA.27-1 Evaluation Year: 1987 PA.27-1 Site Operations: Processed rare earth, principally zirconium and monazite sand was processed on a pilot-plant scale. PA.27-2 Site Disposition: Eliminated - Limited quantity of material handled - Potential for contamination considered remote PA.27-1 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Zirconium, Possibly Uranium PA.27-1 PA.27-2 PA.27-3 Radiological Survey(s): None Indicated Site Status: Eliminated from further consideration under FUSRAP Also see Documents Related to Foote Mineral Co.

119

Mercury Contents of Natural Thermal and Mineral Fluids, In- U.S. Geological  

Open Energy Info (EERE)

Mercury Contents of Natural Thermal and Mineral Fluids, In- U.S. Geological Mercury Contents of Natural Thermal and Mineral Fluids, In- U.S. Geological Survey Professional Paper 713 Jump to: navigation, search OpenEI Reference LibraryAdd to library Book Section: Mercury Contents of Natural Thermal and Mineral Fluids, In- U.S. Geological Survey Professional Paper 713 Abstract Abstract unavailable. Authors D.E. White, M.E. Hinkle and I. Barnes Published U.S. Government Printing Office, 1970 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Mercury Contents of Natural Thermal and Mineral Fluids, In- U.S. Geological Survey Professional Paper 713 Citation D.E. White,M.E. Hinkle,I. Barnes. 1970. Mercury Contents of Natural Thermal and Mineral Fluids, In- U.S. Geological Survey Professional Paper 713.

120

Minerals Yearbook, 1988. Boron  

Science Conference Proceedings (OSTI)

U.S. production and sales of boron minerals and chemicals decreased during the year. Glass-fiber insulation was the largest use for borates, followed by sales to distributors, textile-grade glass fibers, and borosilicate glasses. California was the only domestic source of boron minerals. The report discusses the following: domestic data coverage; legislation and government programs; domestic production; comsumption and uses; prices; foreign trade; world capacity; world review--Argentina, Chile, France, Italy, Turkey, United Kingdom; Technology.

Lyday, P.A.

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

EIA Energy Efficiency-Table 4f. Industrial Production Indexes...  

Annual Energy Outlook 2012 (EIA)

f Page Last Modified: May 2010 Table 4f. Industrial Production Indexes by Selected Industries, 1998, 2002, and 2006 (2000 100) MECS Survey Years NAICS Subsector and Industry 1998...

122

Business Innovation Programs Agribusiness Supply Chain Survey  

E-Print Network (OSTI)

Business Innovation Programs Agribusiness Supply Chain Survey Industrial Energy Efficiency Healthy LAFAYETTE, Ind. - An industry's supply chain is only as strong as its weakest link. For the agribusiness Workforce Green Worker Certification Nanotechnology Transfer Energy Systems Network Innovations Link #12

123

Absorbents for Mineral Oil Spill Cleanup, Phase 3: Field Performance  

Science Conference Proceedings (OSTI)

Residual mineral oil on the ground surface following electrical equipment spills is often removed using a surface application of an absorbent material. Traditional absorbent products include clays, sawdust-like products, silica-based products, and various organic industry byproduct materials. This project was performed in three phases. Phase 1 included testing to measure overall mineral oil absorption efficiency of 24 absorbents. In Phase 2, absorbents studied in Phase 1 were further ...

2012-12-10T23:59:59.000Z

124

MINERAL COUNTY COMMISSIONERS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Board of Board of MINERAL COUNTY COMMISSIONERS Telephone: 702-945-2446 Fax: 702-945-0706 P.O. Box 4150 Hawthorne, Nevada 89415 JACKIE WALLIS, Chairman GOVERNING BOARD FOR THE TOWNS OF DAN DILLARD, Vice Chairman HAWTHORNE, LUNING AND MINA BOB LYBARGER, Member LIQUOR BOARD GAMING BOARD U.S. Department of Energy Office of General Counsel, GC-52 1000 Independence Ave. S.W. Washington, DC 20585 Dear Sirs: Attached are the comments for modification of the Price-Anderson Act Notice of Inquiry(NOI) provided to the Board of Mineral County Commissioners, in a letter dated January

125

Telluric Survey | Open Energy Information  

Open Energy Info (EERE)

Telluric Survey Telluric Survey Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Telluric Survey Details Activities (3) Areas (3) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Geophysical Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Electromagnetic Sounding Techniques Information Provided by Technique Lithology: Rock composition, mineral and clay content Stratigraphic/Structural: Detection of permeable pathways, fracture zones, faults Hydrological: Resistivity influenced by porosity, grain size distribution, permeability, fluid saturation, fluid type and phase state of the pore water Thermal: Resistivity influenced by temperature Cost Information Low-End Estimate (USD): 522.2252,222 centUSD

126

CO2 Mineral Sequestration Studies  

NLE Websites -- All DOE Office Websites (Extended Search)

Sequestration Studies Sequestration Studies Introduction, Issues and Plans Philip Goldberg National Energy Technology Laboratory Workshop on CO 2 Sequestration with Minerals August 8, 2001 Mineral Sequestration Program Research effort seeks to refine and validate a promising CO 2 sequestration technology option, mineral sequestration also known as mineral carbonation Goals: * Understand the fundamental mechanisms involved in mineral carbonation * Generate data to support process development * Operate continuous, integrated small-scale process unit to support design Current Partnerships In order to effectively develop Mineral Sequestration, a multi-laboratory Working Group was formed in the Summer of 1998, participants include: * Albany Research Center * Arizona State University * Los Alamos National Laboratory

127

Carbon Emissions: Paper Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Paper Industry Paper Industry Carbon Emissions in the Paper Industry The Industry at a Glance, 1994 (SIC Code: 26) Total Energy-Related Emissions: 31.6 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 8.5% Total First Use of Energy: 2,665 trillion Btu -- Pct. of All Manufacturers: 12.3% -- Pct. Renewable Energy: 47.7% Carbon Intensity: 11.88 MMTC per quadrillion Btu Renewable Energy Sources (no net emissions): -- Pulping liquor: 882 trillion Btu -- Wood chips and bark: 389 trillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 31.6 Net Electricity 11.0

128

Carbon Emissions: Chemicals Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Chemicals Industry Chemicals Industry Carbon Emissions in the Chemicals Industry The Industry at a Glance, 1994 (SIC Code: 28) Total Energy-Related Emissions: 78.3 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 21.1% -- Nonfuel Emissions: 12.0 MMTC Total First Use of Energy: 5,328 trillion Btu -- Pct. of All Manufacturers: 24.6% Energy Sources Used As Feedstocks: 2,297 trillion Btu -- LPG: 1,365 trillion Btu -- Natural Gas: 674 trillion Btu Carbon Intensity: 14.70 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 78.3 Natural Gas 32.1

129

US Minerals Databrowser | Open Energy Information  

Open Energy Info (EERE)

US Minerals Databrowser AgencyCompany Organization Jonathan Callahan Resource Type Maps Website http:mazamascience.comMiner References US Minerals Databrowser1 The US...

130

DOE - Office of Legacy Management -- International Minerals and Chemical  

Office of Legacy Management (LM)

International Minerals and Chemical International Minerals and Chemical Corp - Pilot Plant - FL 02 FUSRAP Considered Sites Site: International Minerals and Chemical Corp - Pilot Plant (FL.02) Designated Name: Not Designated Alternate Name: None Location: Mulberry , Florida FL.02-1 Evaluation Year: 1985 FL.02-2 Site Operations: Erected and operated a pilot plant to process material from the leached zone of the Florida pebble phosphate field for the recovery of uranium and other saleable products and also conducted experimental investigations to recover uranium from phosphates. FL.02-3 FL.02-4 Site Disposition: Eliminated - No Authority FL.02-6 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium FL.02-3 FL.02-4 Radiological Survey(s): Yes FL.02-1

131

Industrial Applications  

Science Conference Proceedings (OSTI)

Table 2   Frequently used rubber linings in other industries...Application Lining Power industry Scrubber towers Blended chlorobutyl Limestone slurry tanks Blended chlorobutyl Slurry piping Blended chlorobutyl 60 Shore A hardness natural rubber Seawater cooling water

132

EIA Energy Efficiency-Table 3d. Value Added by Selected Industries, 1998,  

Gasoline and Diesel Fuel Update (EIA)

d d Page Last Modified: May 2010 Table 3d. Value Added1 by Selected Industries, 1998, 2002, and 2006 (Current Brillion Dollars) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 173 205 233 312 Beverage and Tobacco Product Manufacturing 62 67 79 313 Textile Mills 24 19 17 314 Textile Product Mills 13 13 15 315 Apparel Manufacturing 32 21 16 316 Leather and Allied Product Manufacturing 5 3 3 321 Wood Product Manufacturing 34 35 44 322 Paper Manufacturing 73 76 80 323 Printing and Related Support Activities 60 59 60 324 Petroleum and Coal Products Manufacturing 32 37 126 325 Chemical Manufacturing 230 254 340 326 Plastics and Rubber Products Manufacturing 86 92 99 327 Nonmetallic Mineral Product Manufacturing 53 55 72 331 Primary Metal Manufacturing 69 57 84 332 Fabricated Metal Product Manufacturing

133

EIA Energy Efficiency-Table 3e. Gross Output by Selected Industries, 1998,  

Gasoline and Diesel Fuel Update (EIA)

e e Page Last Modified: May 2010 Table 3e. Gross Output1 by Selected Industries, 1998, 2002, and 2006 (Current Billion Dollars) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 417 444 526 312 Beverage and Tobacco Product Manufacturing 114 128 144 313 Textile Mills 57 45 38 314 Textile Product Mills 31 30 32 315 Apparel Manufacturing 63 40 26 316 Leather and Allied Product Manufacturing 10 6 6 321 Wood Product Manufacturing 91 88 111 322 Paper Manufacturing 153 151 167 323 Printing and Related Support Activities 99 95 99 324 Petroleum and Coal Products Manufacturing 135 212 530 325 Chemical Manufacturing 407 444 639 326 Plastics and Rubber Products Manufacturing 162 169 208 327 Nonmetallic Mineral Product Manufacturing 91 94 126 331 Primary Metal Manufacturing 166 139 230 332 Fabricated Metal Product Manufacturing

134

EIA Energy Efficiency-Table 4d. Value Added by Selected Industries, 1998  

Gasoline and Diesel Fuel Update (EIA)

d d Page Last Modified: May 2010 Table 4d. Value Added1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars 2) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 193 182 214 312 Beverage and Tobacco Product Manufacturing 70 59 73 313 Textile Mills 23 18 17 314 Textile Product Mills 13 13 15 315 Apparel Manufacturing 32 22 17 316 Leather and Allied Product Manufacturing 5 3 3 321 Wood Product Manufacturing 35 35 37 322 Paper Manufacturing 84 77 85 323 Printing and Related Support Activities 62 56 59 324 Petroleum and Coal Products Manufacturing 38 46 53 325 Chemical Manufacturing 225 248 291 326 Plastics and Rubber Products Manufacturing 84 88 99 327 Nonmetallic Mineral Product Manufacturing 55 54 66

135

Industries Affected  

Science Conference Proceedings (OSTI)

Table 2   Industries affected by microbiologically influenced corrosion...generation: nuclear, hydro, fossil fuel,

136

COMPUTER-AIDED TRANSLATION AN INDUSTRY SURVEY  

E-Print Network (OSTI)

u s i n e s s School, this report is essential to anyone in the translation field. The report. ii·.·:··~i / / "An exceptionally important and original publication not merely for English but lin- ·: ' Gv :i:iii?i:iii ~:!;:::guistics and science as well." - Neoterm. iiii!i~i:~i Over 1/4 million

137

REGULATING HAWAII'S PETROLEUM INDUSTRY  

E-Print Network (OSTI)

This study was prepared in response to House Resolution No. 174, H.D. 2, which was adopted during the Regular Session of 1995. The Resolution requested the Legislative Reference Bureau to conduct a study to obtain the views of selected state agencies and representatives of Hawaii's petroleum industry in order to assist the Legislature in formulating policies that protect the interests of Hawaii's gasoline consumers. The Resolution sought information and the views of survey participants on a broad range of proposals to regulate Hawaii's petroleum industry. This study reviews each of these proposals in terms of their value to consumers, and explores both regulatory policy options and alternatives to regulation available to state lawmakers. The Bureau extends its sincere appreciation to all those whose participation and cooperation made this study possible. A list of contact persons, including the names of survey participants and others who helped to contribute to this study, is contained in Appendix B.

Mark J. Rosen; Wendell K. Kimura

1995-01-01T23:59:59.000Z

138

Oxidative Mineralization and Characterization of Polyvinyl Alcohol Solutions for Wastewater Treatment  

SciTech Connect

The principal objectives of this study are to identify an appropriate polyvinyl alcohol (PVA) oxidative mineralization technique, perform compatibility and evaporation fate tests for neat and mineralized PVA, and determine potential for PVA chemical interferences which may affect ion exchange utilization for radioactive wastewater processing in the nuclear industry.

Oji, L.N.

1999-08-31T23:59:59.000Z

139

Market analysis of the solar energy industry  

SciTech Connect

This report describes the results of a survey of companies in the solar energy industry. The general objective of the survey was to provide information to help evaluate the effectiveness of technology transfer mechanisms for the development of the solar industry. The specific objectives of the survey included: (1) determination of the needs of the solar industry; (2) identification of special concerns of the solar industry; and (3) determination of the types of technology transfer mechanisms that would be most helpful to the solar industry in addressing these needs and concerns. The major focus was on technical problems and developments, but institutional and marketing considerations were also treated. The majority of the sample was devoted to the solar heating and cooling (SHAC) component of the industry. However, a small number of photovoltaic (PV), wind, and power generation system manufacturers were also surveyed. Part I discusses the methodology used in the selection, performance, and data reduction stages of the survey, comments on the nature of the responses, and describes the conclusions drawn from the survey. The latter include both general conclusions concerning the entire solar industry, and specific conclusions concerning component groups, such as manufacturers, architects, installers, or dealers. Part II consists of tabulated responses and non-attributed verbatim comments that summarize and illustrate the survey results.

1979-08-01T23:59:59.000Z

140

Industrial Retrofits are Possible  

E-Print Network (OSTI)

Ontario is the industrial heartland of Canada and more than 80% of its energy comes from Canadian sources with the remainder from the neighbouring U.S. states. Because of the ever increasing demand for energy relating to increased economic activity, the provincial government's major energy priority is efficiency. In April of 1987, the provincial government initiated a program to assist industrial energy users to reduce their energy usage. This program was designed to concentrate on an in-depth analysis of the complete operations of industrial plants with the analyses being performed by specialist, private sector, engineering consultants. The program is in 3 phases providing an Ontario industrial plant with an Energy Analysis, a Feasibility Analysis Grant and a Project Engineering Design Grant. In this presentation, the author will outline the results of the program to date and will attempt to share with the audience the individual case experiences. Since the program's start, the Ontario Ministry of Energy has completed over 320 energy analyses of industrial plants which had combined energy bills of over $420 million. The potential annual energy savings identified were over $40 million or 9.51%. Electricity and natural gas are the major fuels used by Ontario industries and our surveys to date have shown savings of 6% in electricity and 11% in natural gas. Over the first two years of the program, individual plants have or are intending to implement more than half of the energy analysis recommendations.

Stobart, E. W.

1990-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Survey Expectations  

E-Print Network (OSTI)

of Michigan and is known as the Michigan survey, with many other similar surveys conducted across OECD countries so as to provide up to date information on consumer expectations. Questions on expectations are also sometimes included in panel surveys... be formed, do of course make it possible to assess whether, or how far, such expectations are well-founded by comparing the experiences of individual households with their prior expectations. A key aspect of the Michigan survey, and of many other more recent...

Pesaran, M Hashem; Weale, Martin

2006-03-14T23:59:59.000Z

142

Hearing protection for miners  

Science Conference Proceedings (OSTI)

A NIOSH analysis showed that at age 50 approximately 90% of coal miners have a hearing impairment, yet noise included hearing loss is 100% preventable. The article discusses requirements of the MSHA regulations, 30 CFR Part 62 - occupational noise exposure (2000) and a 2008-MSHA document describing technologically achievable and promising controls for several types of mining machinery. Hearing protection is still required for exposure to greater than 90 dBA. These are now commercially available ways to determine how much attenuation an individual gets from a given hearing protector, known as 'fit testing'. 3 refs., 1 fig., 1 tab., 1 photo.

Schulz, T. [Sperian Hearing Protection (United States)

2008-10-15T23:59:59.000Z

143

Guidelines for Estimating Unmetered Industrial Water Use  

SciTech Connect

The document provides a methodology to estimate unmetered industrial water use for evaporative cooling systems, steam generating boiler systems, batch process applications, and wash systems. For each category standard mathematical relationships are summarized and provided in a single resource to assist Federal agencies in developing an initial estimate of their industrial water use. The approach incorporates industry norms, general rules of thumb, and industry survey information to provide methodologies for each section.

Boyd, Brian K.

2010-08-01T23:59:59.000Z

144

Industry @ ALS  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry @ ALS Industry @ ALS Industry @ ALS Concrete Industry Benefits from Ancient Romans and the ALS Print Thursday, 17 October 2013 14:24 New insights into the Romans' ingenious concrete harbor structures emerging from ALS beamline research could move the modern concrete industry toward its goal of a reduced carbon footprint. Summary Slide Read more... Moving Industry Forward: Finding the Environmental Opportunity in Biochar Print Thursday, 12 September 2013 08:41 Using ALS Beamlines 10.3.2 and 8.3.2, the Environmental Protection Agency (EPA) is currently investigating how biochar sorbs environmental toxins and which kinds of biochar are the most effective. The possibilities for widespread use have already launched entrepreneurial commercial ventures. Summary Slide

145

A Visualization Application for the Mining Industry Using Standard Tools  

E-Print Network (OSTI)

-mining related data, such as the look of the exposed orebody, the overburden material, the reclaimed area-Based Visualization of Reclaimed Mine Sites". APCOM'99: Computer Applications in the Minerals Industries, Golden, CO

146

Survey Statisticians  

U.S. Energy Information Administration (EIA) Indexed Site

Survey Statisticians Survey Statisticians The U.S.Energy Information Administration (EIA) within the Department of Energy has forged a world-class information program that stresses quality, teamwork, and employee growth. In support of our program, we offer a variety of profes- sional positions, including the Survey Statistician, who measures the amounts of energy produced and consumed in the United States. Responsibilities: Survey Statisticians perform or participate in one or more of the following important functions: * Design energy surveys by writing questions, creating layouts and testing questions for clarity and accuracy. * Conduct energy surveys to include sending out and tracking survey responses, editing and analyzing data submis- sions and communicating with respondents to verify data.

147

Magma Source Location Survey  

DOE Green Energy (OSTI)

A survey of Industry/University geophysicists was conducted to obtain their opinions on the existence of shallow (less than 10 km from surface) magma bodies in the western conterminous United States and methods for locating and defining them. Inputs from 35 individuals were received and are included. Responses were that shallow magma bodies exist and that existing geophysical sensing systems are adequate to locate them.

Hardee, H.C.; Dunn, J.C.; Colp, J.L.

1982-03-01T23:59:59.000Z

148

Aeromagnetic Survey | Open Energy Information  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » Aeromagnetic Survey Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Aeromagnetic Survey Details Activities (26) Areas (19) Regions (1) NEPA(0) Exploration Technique Information Exploration Group: Geophysical Techniques Exploration Sub Group: Magnetic Techniques Parent Exploration Technique: Magnetic Techniques Information Provided by Technique Lithology: Stratigraphic/Structural: map structure, basin fill thickness, and magnetic mineral concentrations in ore bodies Hydrological: Thermal: Cost Information Low-End Estimate (USD): 22.532,253 centUSD

149

Trade in Mineral Resources Graham A. Davis and Arturo L. Vsquez Cordano  

E-Print Network (OSTI)

and natural gas involves special considerations of market power and energy security that warrant a separate, Journal of Economics Surveys, doi: 10.1111/j.1467-6419.2011.00695.x, which has been published to provide a survey of the state of knowledge regarding mineral trade. Given the paucity of previous work

150

Fluidized Bed Applications for the Minerals Industry and Renewable ...  

Science Conference Proceedings (OSTI)

Experiences from metallurgical processes have been expanded to new applications in the oil shale processing, biomass combustion and renewable energy ...

151

Iowa State Mining and Mineral Resources Research Institute  

SciTech Connect

This final report describes the activities of the Iowa State Mining and Mineral Resources Research Institute (ISMMRRI) at Iowa State University for the period July 1, 1989, to June 30, 1990. Activities include research in mining- and mineral-related areas, education and training of scientists and engineers in these fields, administration of the Institute, and cooperative interactions with industry, government agencies, and other research centers. During this period, ISMMRRI has supported research efforts to: (1) Investigate methods of leaching zinc from sphalerite-containing ores. (2) Study the geochemistry and geology of an Archean gold deposit and of a gold-telluride deposit. (3) Enchance how-quality aggregates for use in construction. (4) Pre-clean coal by triboelectric charging in a fluidized-bed. (5) Characterize the crystal/grain alignment during processing of yttrium-barium-copper-perovskite (1-2-3) superconductors. (5) Study the fluid inclusion properties of a fluorite district. (6) Study the impacts of surface mining on community planning. (7) Assess the hydrophobicity of coal and pyrite for beneficiation. (8) Investigate the use of photoacoustic absorption spectroscopy for monitoring unburnt carbon in the exhaust gas from coal-fired boilers. The education and training program continued within the interdepartmental graduate minor in mineral resources includes courses in such areas as mining methods, mineral processing, industrial minerals, extractive metallurgy, coal science and technology, and reclamation of mined land. In addition, ISMMRRI hosted the 3rd International Conference on Processing and Utilization of High-Sulfur Coals in Ames, Iowa. The Institute continues to interact with industry in order to foster increased cooperation between academia and the mining and mineral community.

Not Available

1990-08-01T23:59:59.000Z

152

AERIAL RADIOLOGICAL SURVEYS  

SciTech Connect

Measuring terrestrial gamma radiation from airborne platforms has proved to be a useful method for characterizing radiation levels over large areas. Over 300 aerial radiological surveys have been carried out over the past 25 years including U.S. Department of Energy (DOE) sites, commercial nuclear power plants, Formerly Utilized Sites Remedial Action Program/Uranium Mine Tailing Remedial Action Program (FUSRAP/UMTRAP) sites, nuclear weapons test sites, contaminated industrial areas, and nuclear accident sites. This paper describes the aerial measurement technology currently in use by the Remote Sensing Laboratory (RSL) for routine environmental surveys and emergency response activities. Equipment, data-collection and -analysis methods, and examples of survey results are described.

Proctor, A.E.

1997-06-09T23:59:59.000Z

153

Economic Impacts of the Forest Industry in Florida, 2003 Final Report to the Florida Forestry Association  

E-Print Network (OSTI)

.......................................16 List of Tables Table ES-1. Florida forest industry groups surveyed, response rates, and reported .......................................................................15 Table 3.1. Florida forest industry survey responses and response rates was estimated at around 30 thousand jobs. Table ES-1. Florida forest industry groups surveyed, response rates

Florida, University of

154

"Annual Electric Power Industry Report (EIA-861 data file)  

Annual Energy Outlook 2012 (EIA)

Data Released: September 20, 2012 Data for: 2011 Next Release: September 2013 Re-Release Date: November 27, 2012 (CORRECTION) Survey form EIA-861 -- Annual Electric Power Industry...

155

Digital Surveying Directional Surveying Specialists | Open Energy  

Open Energy Info (EERE)

Digital Surveying Directional Surveying Specialists Digital Surveying Directional Surveying Specialists Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Digital Surveying Directional Surveying Specialists Author Directional Surveying Specialists Published Publisher Not Provided, 2012 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Digital Surveying Directional Surveying Specialists Citation Directional Surveying Specialists. Digital Surveying Directional Surveying Specialists [Internet]. 2012. [cited 2013/10/08]. Available from: http://www.digitalsurveying.co.za/services/geophysical-borehole-surveying/overview/optical-televiewer/ Retrieved from "http://en.openei.org/w/index.php?title=Digital_Surveying_Directional_Surveying_Specialists&oldid=690244"

156

NETL Mineral Carbonation Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview Overview Mineral Carbonation Workshop August 8, 2001 Carl O. Bauer, Associate Laboratory Director Descriptor - include initials, /org#/date We Are: * One of DOE's 15 national laboratories * Government owned and operated * Sites in Oklahoma, Pennsylvania, and West Virginia * Over 1,100 federal and support contractor employees * FY01 budget of $774 million July 2001 Descriptor - include initials, /org#/date Sites in Pennsylvania, West Virginia, Oklahoma Morgantown, WV Pittsburgh, PA Tulsa, OK Descriptor - include initials, /org#/date Our Mission * Resolve the environmental, supply, and reliability constraints of producing and using fossil resources to provide Americans with a stronger economy, healthier environment, and more secure future * Support development and deployment of environmental technologies that reduce

157

SCO Survey  

Science Conference Proceedings (OSTI)

Survey on Future of NIST's Standards Information Services. June 5, 2013. *. Bookmark and Share. Contact: Clare Allocca 301-975-4359. ...

2013-06-05T23:59:59.000Z

158

Sustainable Water Management in the Minerals Industry 1 SUSTAINABLE WATER MANAGEMENT IN THE MINERALS  

E-Print Network (OSTI)

interest. It arises in the provision of water for Queensland coal mines, where additional water Introduction In the operation of a coal mine, water is an important resource, without which the mine cannot operate. Central Queensland coal mines collect rain water in dams and also have access to a water pipeline

McGuinness, Mark

159

Survey of toxicity and carcinogenity of mineral deposits  

SciTech Connect

The toxicities and biogeochemical cycles of arsenic, cadmium, chromium, lead and nickel are reviewed in some detail, and other trace elements briefly mentioned. These heavy metals are used as a framework within which the problem of low-level radioactive waste disposal can be compared. (ACR)

Furst, A.; Harding-Barlow, I.

1981-11-03T23:59:59.000Z

160

Survey Consumption  

Gasoline and Diesel Fuel Update (EIA)

fsidentoi fsidentoi Survey Consumption and 'Expenditures, April 1981 March 1982 Energy Information Administration Wasningtoa D '" N """"*"""*"Nlwr. . *'.;***** -. Mik>. I This publication is available from ihe your COr : 20585 Residential Energy Consumption Survey: Consum ption and Expendi tures, April 1981 Through March 1982 Part 2: Regional Data Prepared by: Bruce Egan This report was prepared by the Energy Information Administra tion, the independent statistical

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Coal industry annual 1997  

Science Conference Proceedings (OSTI)

Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

NONE

1998-12-01T23:59:59.000Z

162

Economic Impact of the Texas Poultry Industry  

E-Print Network (OSTI)

It is estimated that the Texas poultry industry contributes more than $1.6 billion to the state's economy, according to results of a survey of broiler, egg and turkey producers operating in 2003. Details about industry income, employees and economic impact are presented in this publication.

Carey, John B.

2004-12-02T23:59:59.000Z

163

Field Laboratory in the Osage Reservation -- Determination of the Status of Oil and Gas Operations: Task 1. Development of Survey Procedures and Protocols  

SciTech Connect

Procedures and protocols were developed for the determination of the status of oil, gas, and other mineral operations on the Osage Mineral Reservation Estate. The strategy for surveying Osage County, Oklahoma, was developed and then tested in the field. Two Osage Tribal Council members and two Native American college students (who are members of the Osage Tribe) were trained in the field as a test of the procedures and protocols developed in Task 1. Active and inactive surface mining operations, industrial sites, and hydrocarbon-producing fields were located on maps of the county, which was divided into four more or less equal areas for future investigation. Field testing of the procedures, protocols, and training was successful. No significant damage was found at petroleum production operations in a relatively new production operation and in a mature waterflood operation.

Carroll, Herbert B.; Johnson, William I.

1999-04-27T23:59:59.000Z

164

Climate Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Operations Employee Operations Employee Climate Survey March 2009 Acknowledgements The Berkeley Lab Survey Team consisted of the following: Jim Krupnick, Sponsor Vera Potapenko, Project Lead Karen Ramorino, Project Manager Chris Paquette, MOR Associates Alexis Bywater, MOR Associates MOR Associates, an external consulting firm, acted as project manager for this effort, analyzing the data and preparing this report. MOR Associates specializes in continuous improve- ment, strategic thinking and leadership development. MOR Associates has conducted a number of large-scale surveys for organizations in higher education, including MIT, Stanford, the University of Chicago, and others. MOR Associates, Inc. 462 Main Street, Suite 300 Watertown, MA 02472 tel: 617.924.4501

165

Industrial Use of Infrared Inspections  

E-Print Network (OSTI)

Infrared is and has been an established technology in the military and aerospace fields. However, only relatively recently has this technology found a "use" in the industrial sector. Many reasons exist why the technology has not been used, but in the final analysis it comes down to the fact that the industrial management responsible for the operations and production budgets did not, and in many cases, still does not understand the economic benefits to the company that infrared industrial inspections can bring about. Over the last 2-3 years a number of articles have appeared in various industrial publications concerning infrared surveys. However, all of the articles have dealt with the technical aspects of infrared inspections, with the economics either completely neglected or mentioned only in passing. I believe that in the real industrial world it is the economic benefits of a technology that allow the product of that technology to reach the market and become a success, and not the fact that a technology is useful per se. In this presentation, I shall be focusing primarily on the major economic aspects of the surveys and what the end results really represent in terms of economic benefits. Once the economic benefits of these inspections are clearly understood, it will be readily apparent why the industrial use of these inspections is developing rapidly.

Duch, A. A.

1979-01-01T23:59:59.000Z

166

VLBI surveys  

E-Print Network (OSTI)

Systematic surveys of astronomical objects often lead to discoveries, but always provide invaluable information for statistical studies of well-defined samples. They also promote follow-up investigations of individual objects or classes. Surveys using a yet unexplored observing wavelength, a novel technique or a new instrument are of special importance. Significantly improved observing parameters (e.g. sensitivity, angular resolution, monitoring capability) provide new insight into the morphological and physical properties of the objects studied. I give a brief overview of the important Very Long Baseline Interferometry (VLBI) imaging surveys conducted in the past. A list of surveys guides us through the developments up until the present days. I also attempt to show directions for the near future.

S. Frey

2006-11-08T23:59:59.000Z

167

Industrial Energy Efficiency Programs: Development and Trends  

E-Print Network (OSTI)

As more states establish Energy Efficiency Resource Standards (EERS), goals for energy efficiency savings are increasing across the country. Increasingly, states are relying on their industrial energy efficiency programs to find and help implement those savings. Historically, industrial energy efficiency programs have not been completely effective at finding those savings, in large part because the programs have not been flexible enough to accommodate the heterogeneous needs and unique characteristics of the industrial sector. This paper will discuss the state of industrial energy efficiency programs today. Relying on an ACEEE-administered survey of 35 industrial energy efficiency programs, we will determine current trends and challenges, address emerging needs, and identify best practices in the administration of today's industrial efficiency programs. The paper will serve as an update on industrial energy efficiency program activities and discuss the ways in which today's programs are trying to serve their industrial clients better.

Chittum, A.; Kaufman, N.; Elliot, N.

2010-01-01T23:59:59.000Z

168

Carbon Emissions: Petroleum Refining Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Petroleum Refining Industry Petroleum Refining Industry Carbon Emissions in the Petroleum Refining Industry The Industry at a Glance, 1994 (SIC Code: 2911) Total Energy-Related Emissions: 79.9 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 21.5% -- Nonfuel Emissions: 16.5 MMTC Total First Use of Energy: 6,263 trillion Btu -- Pct. of All Manufacturers: 28.9% Nonfuel Use of Energy Sources: 3,110 trillion Btu (49.7%) -- Naphthas and Other Oils: 1,328 trillion Btu -- Asphalt and Road Oil: 1,224 trillion Btu -- Lubricants: 416 trillion Btu Carbon Intensity: 12.75 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey", "Monthly Refinery Report" for 1994, and Emissions of Greenhouse Gases in the United States 1998.

169

Associations and Industry - TMS  

Science Conference Proceedings (OSTI)

... Associations and Industry, Research Programs, ==== Basic Metallurgy ==== ... FORUMS > ASSOCIATIONS AND INDUSTRY, Replies, Views, Originator, Last ...

170

Available Technologies: Mineralization of Biocompatible ...  

For Industry; For Researchers; Success Stories; About Us; ... Unlike the bioinert materials currently used in the fabrication of orthopedic implants ...

171

Minerals outlook for Wyoming  

Science Conference Proceedings (OSTI)

Wyoming drilling activity was down. The rig count was at a seven year low in February. Crude oil prices also affect Wyoming's gas production. Fuel oil prices are already low enough to compete with higher priced gas, and may edge out part of the market for natural gas. This year's coal production is still forecast at 112 million tons - a 3.7 percent increase over the 108 million tons produced in 1982. Average coal prices are currently forecast at $13.20 in 1982 and $13.86 in 1983. In 1983, demand for soda ash (trona), iron ore, limestone, and gypsum should reflect any improvements in the national economy. Bentonite is dependent enough on oil and gas drilling activity that significant improvements will probably mirror the status of the petroleum industry. Aggregate (sand, gravel, ballast, clinker, etc.) production will primarily depend on the levels of highway construction and railroad maintenance. Uranium production will remain at low levels, and may even decline with the closure of the Sweetwater mine. There will be some exploration for metals and diamonds in Wyoming this year, however, unless gold and silver prices improve, exploration will fall short of earlier expectations. (DP)

Glass, G.B.

1983-01-01T23:59:59.000Z

172

Industrial alliances  

Science Conference Proceedings (OSTI)

The United States is emerging from the Cold War era into an exciting, but challenging future. Improving the economic competitiveness of our Nation is essential both for improving the quality of life in the United States and maintaining a strong national security. The research and technical skills used to maintain a leading edge in defense and energy now should be used to help meet the challenge of maintaining, regaining, and establishing US leadership in industrial technologies. Companies recognize that success in the world marketplace depends on products that are at the leading edge of technology, with competitive cost, quality, and performance. Los Alamos National Laboratory and its Industrial Partnership Center (IPC) has the strategic goal to make a strong contribution to the nation`s economic competitiveness by leveraging the government`s investment at the Laboratory: personnel, infrastructure, and technological expertise.

Adams, K.V.

1993-09-13T23:59:59.000Z

173

MINERAL: A program for the propagation of analytical uncertainty through mineral formula recalculations  

Science Conference Proceedings (OSTI)

MINERAL (MINeral ERror AnaLysis) is a MATLAB^(R) based program that performs mineral formula recalculations and calculates the error on formula unit cations though the propagation of analytical uncertainties. The program is focused on 9 common mineral ... Keywords: Error, Mineral recalculation, Uncertainty

Sarah M. H. De Angelis; Owen K. Neill

2012-11-01T23:59:59.000Z

174

Pacific Walrus Sightings Documented by COMIDA Aerial Surveys of the Northeastern Chukchi Sea in 2010  

E-Print Network (OSTI)

Pacific Walrus Sightings Documented by COMIDA Aerial Surveys of the Northeastern Chukchi Sea agreement with the Minerals Management Service, conducted aerial surveys in the northeastern Chukchi Sea as part of the Chukchi Offshore Monitoring in Drilling Area (COMIDA) project. The surveys, which have been

175

CRYSTAL CHEMISTRY OF HYDROUS MINERALS  

DOE Green Energy (OSTI)

Hydrogen has long been appreciated for its role in geological processes of the Earth's crust. However, its role in Earth's deep interior has been neglected in most geophysical thinking. Yet it is now believed that most of our planet's hydrogen may be locked up in high pressure phases of hydrous silicate minerals within the Earth's mantle. This rocky interior (approximately 7/8 of Earth's volume) is conjectured to contain 1-2 orders of magnitude more water than the more obvious oceans (the ''hydrosphere'') and atmosphere. This project is aimed at using the capability of neutron scattering from hydrogen to study the crystal chemistry and stability of hydrogen-bearing minerals at high pressures and temperatures. At the most basic level this is a study of the atomic position and hydrogen bond itself. We have conducted experimental runs on hydrous minerals under high pressure and high temperature conditions. The crystallographic structure of hydrous minerals at extreme conditions and its structural stability, and hydrogen bond at high P-T conditions are the fundamental questions to be addressed. The behavior of the hydrous minerals in the deep interior of the Earth has been discussed.

Y. ZHAO; ET AL

2001-02-01T23:59:59.000Z

176

Transforming the Freight Industry  

E-Print Network (OSTI)

Transforming the Freight Industry From Regulation to Icommon-carrier freight industry was Competition to backwardjourneys. When the freight industry was deregulated, it was

Regan, Amelia

2002-01-01T23:59:59.000Z

177

Demographics and industry returns  

E-Print Network (OSTI)

Demographics and Industry Returns By Stefano DellaVigna andand returns across industries. Cohort size fluc- tuationspredict profitability by industry. Moreover, forecast demand

Pollet, Joshua A.; DellaVigna, Stefano

2007-01-01T23:59:59.000Z

178

High temperature mineral fiber binder  

SciTech Connect

A modified phenol formaldehyde condensate is reacted with boric acid and cured in the presence of a polyfunctional nitrogeneous compound to provide a binder for mineral wool fibers which is particularly suited for thermal insulation products intended for high temperature service.

Miedaner, P.M.

1980-11-25T23:59:59.000Z

179

A Low Cost Energy Management Program at Engelhard Industries Division  

E-Print Network (OSTI)

Engelhard Corporation, established as an independent company on May 20, 1981, consists of the Engelhard Industries and the Minerals and Chemicals Divisions of the former Engelhard Minerals and Chemicals Corporation. Engelhard is a world leader in technology related to precious metals and nonmetallic minerals. It manufactures high-performance chemical and precious metals products, including catalysts for the petroleum and automotive industries. Engelhard's energy costs have risen dramatically over the past few years. Increases over 19% were experienced both in 1979 and 1980. Energy cost in 1980 was over $7.8 million. Engelhard Industries management realizes that with the continuously escalating cost of energy, energy management has become extremely important to the profitability of the division.

Brown, T. S.; Michalek, R.; Reiter, S.

1982-01-01T23:59:59.000Z

180

JOM Salary Survey - TMS  

Science Conference Proceedings (OSTI)

JOM Salary Survey. This survey is currently closed. Please contact the author of this survey for further assistance. Javascript is required for this site to function, ...

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Industry Perspective  

NLE Websites -- All DOE Office Websites (Extended Search)

idatech.com idatech.com info@idatech.com 63065 NE 18 th Street Bend, OR 97701 541.383.3390 Industry Perspective Biogas and Fuel Cell Workshop National Renewable Energy Laboratory June 11 - 13, 2012 Mike Hicks Chairman of the Board of Directors, FCHEA Treasurer of the Board of Directors, FCS&E Engineering Manager, Technology Development & Integration, IdaTech Outline 1. Critical Factors * Fuel Purity * Fuel Cost 2. Natural Gas - The Wild Card & Competition 3. IdaTech's Experience Implementing Biofuel Critical Factor - Fuel Purity All fuel cell system OEMs have fuel purity specifications * Independent of * Raw materials or feed stocks * Manufacturing process * Depends on * Fuel processor technology * Fuel cell technology - low temp PEM versus SOFC

182

Minerals and Mining Program (South Dakota) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Mining Program (South Dakota) and Mining Program (South Dakota) Minerals and Mining Program (South Dakota) < Back Eligibility Commercial Developer Fed. Government Industrial Installer/Contractor Investor-Owned Utility Local Government Municipal/Public Utility Rural Electric Cooperative State/Provincial Govt Tribal Government Utility Program Info State South Dakota Program Type Siting and Permitting Provider South Dakota Department of Environment and Natural Resources The Minerals and Mining Program has the authority to oversee mining activities in the state and issue regulations pertaining to the permitting and environmental impact mitigation of, and reclamation following, exploration, mining, and oil and gas production. Exploration and mining activities require permits, and mines require licenses for construction and

183

Mineral Transformation and Biomass Accumulation Associated With  

E-Print Network (OSTI)

Mineral Transformation and Biomass Accumulation Associated With Uranium Bioremediation at Rifle transformation and biomass accumulation, both of which can alter the flow field and potentially bioremediation to understand the biogeochemical processes and to quantify the biomass and mineral transformation/ accumulation

Hubbard, Susan

184

Industrial hygiene aspects of underground oil shale mining  

SciTech Connect

Health hazards associated with underground oil shale mining are summarized in this report. Commercial oil shale mining will be conducted on a very large scale. Conventional mining techniques of drilling, blasting, mucking, loading, scaling, and roof bolting will be employed. Room-and-pillar mining will be utilized in most mines, but mining in support of MIS retorting may also be conducted. Potential health hazards to miners may include exposure to oil shale dusts, diesel exhaust, blasting products, gases released from the oil shale or mine water, noise and vibration, and poor environmental conditions. Mining in support of MIS retorting may in addition include potential exposure to oil shale retort offgases and retort liquid products. Based upon the very limited industrial hygiene surveys and sampling in experimental oil shale mines, it does not appear that oil shale mining will result in special or unique health hazards. Further animal toxicity testing data could result in reassessment if findings are unusual. Sufficient information is available to indicate that controls for dust will be required in most mining activities, ventilation will be necessary to carry away gases and vapors from blasting and diesel equipment, and a combination of engineering controls and personal protection will likely be required for control of noise. Recommendations for future research are included.

Hargis, K.M.; Jackson, J.O.

1982-01-01T23:59:59.000Z

185

Office of Industrial Technologies: Industry partnerships  

SciTech Connect

US industries are making progress in turning the vision of the future into reality: More effective competition in global markets, increased industrial efficiency, more jobs, reduced waste generation and greenhouse gas emissions (to 1990 levels), improved environment. DOE`s Office of Industrial Technologies is catalyzing and supporting industry progress in many ways. This pamphlet gives an overview of OIT.

1995-04-01T23:59:59.000Z

186

Photovoltaic industry manufacturing technology. Final report  

DOE Green Energy (OSTI)

This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

1998-08-01T23:59:59.000Z

187

2012 NERSC User Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Results 2012 User Survey Text 2012 NERSC User Survey Text The 2012 NERSC User Survey is closed. The following is the text of the survey. Section 1: Overall Satisfaction with...

188

1980 Active-Solar Installations Survey  

SciTech Connect

The survey covers active solar installations made during and prior to calendar year 1980. As the first survey of active solar installations in the United States, the objective was to establish a national baseline information system that could provide current data on residential and commercial active solar installations as well as a listing of firms involved in the active solar industry, including installers. Potential respondents were identified from regional lists of solar equipment dealers and installers compiled by each Regional Solar Energy Center (RSEC). The RSEC lists were computerized and combined into a mailing list of 5466 company names and addresses. An additional 1619 referrals, were provided by survey respondents from the RSEC list. However, because of resource constraints, 981 of these referrals were not included in the survey. To substantiate that the results of this survey represent accurate statistics on the number of active solar installations in the United States, a comparison was made to the Solar Collector Manufacturing Survey installations. (PSB)

1982-10-01T23:59:59.000Z

189

EIA Energy Efficiency-Table 4e. Gross Output by Selected Industries...  

Gasoline and Diesel Fuel Update (EIA)

e Page Last Modified: May 2010 Table 4e. Gross Output1by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars 2) MECS Survey Years NAICS Subsector and Industry 1998 2002...

190

Method for the Production of Mineral Wool andIron from Serpentine Ore  

NLE Websites -- All DOE Office Websites (Extended Search)

the Production of Mineral Wool and Iron from the Production of Mineral Wool and Iron from Serpentine Ore Overview This invention discloses a method to fabricate a product that has the potential to replace asbestos, which harbors health and environmental risks, with magnesium silicate-based mineral wools. The mineral wool product yields advantages similar to asbestos while eliminating its inherent detriments. Since the late 19th century and into the late 20th century, asbestos has been a commonly used building material for home and industrial use. The popularity of its use can be traced to advantages of high resistance to heat, aversion to electrical and chemical damage, high mechanical strength, and excellent acoustical properties. Despite those advantages, asbestos has been directly

191

Resource Management Services: Mineral Resources, Parts 550-559 (New York) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mineral Resources, Parts 550-559 (New Mineral Resources, Parts 550-559 (New York) Resource Management Services: Mineral Resources, Parts 550-559 (New York) < Back Eligibility Commercial Construction Industrial Investor-Owned Utility Municipal/Public Utility Tribal Government Utility Program Info State New York Program Type Environmental Regulations Provider NY Department of Environmental Conservation This section establishes a Bureau of Mineral Resources within the Department of Environmental Conservation, which has the authority to regulate the exploration and mining for oil and gas resources in New York State. The regulations include permitting and reporting requirements for exploration or production well drilling or deepening, well spacing, drilling practices, well plugging and abandonment, secondary recovery and

192

The Role of Emerging Technologies in Improving Energy Efficiency: Examples from the Food Processing Industry  

E-Print Network (OSTI)

2002 Manufacturing Energy Consumption Survey”, Washington,impacts on industrial energy consumption. The cumulativeemerging technologies on energy consumption in the U.S. food

Lung, Robert Bruce; Masanet, Eric; McKane, Aimee

2006-01-01T23:59:59.000Z

193

Commodity Flow Survey | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Commodity Flow Survey Commodity Flow Survey BusinessUSA Data/Tools Apps Challenges Let's Talk BusinessUSA You are here Data.gov » Communities » BusinessUSA » Data Commodity Flow Survey Dataset Summary Description The Commodity Flow Survey provides information on commodities shipped, their value, weight, and mode of transportation, as well as the origin and destination of shipments of commodities from manufacturing, mining, wholesale, and selected retail and services establishments. It is undertaken through a partnership between the Bureau of the Census, U.S. Department of Commerce, and the Bureau of Transportation Statistics, Research and Innovative Technology Administration. Tags {cfc,commodity,flow," federal",state,local,transportation,facilities,services,energy,safety,environment,Mining,Manufacturing,Wholesale,trade,Retail,Services,auxiliary,establishments,warehouses,industries,export,shipment,distance,tons,weight,hazardous,miles,ton-miles,destination,industry,hazard,ship,intrastate,interstate,"UN number",packaging,"TIH number",u.s.,metropolitan}

194

U.S. Department of the Interior U.S. Geological Survey  

E-Print Network (OSTI)

. Trona deposi- tion dominates the lacustrine basin in its current lowstand state, but lake level varies of a mineral mining industry (Flint and Gale, 1958; Smith, 2000, 2009) and is also home to the Trona Pinnacles

Fleskes, Joe

195

Integrating Steel Production with Mineral Carbon Sequestration  

Science Conference Proceedings (OSTI)

The objectives of the project were (i) to develop a combination iron oxide production and carbon sequestration plant that will use serpentine ores as the source of iron and the extraction tailings as the storage element for CO2 disposal, (ii) the identification of locations within the US where this process may be implemented and (iii) to create a standardized process to characterize the serpentine deposits in terms of carbon disposal capacity and iron and steel production capacity. The first objective was not accomplished. The research failed to identify a technique to accelerate direct aqueous mineral carbonation, the limiting step in the integration of steel production and carbon sequestration. Objective (ii) was accomplished. It was found that the sequestration potential of the ultramafic resource surfaces in the US and Puerto Rico is approximately 4,647 Gt of CO2 or over 500 years of current US production of CO2. Lastly, a computer model was developed to investigate the impact of various system parameters (recoveries and efficiencies and capacities of different system components) and serpentinite quality as well as incorporation of CO2 from sources outside the steel industry.

Klaus Lackner; Paul Doby; Tuncel Yegulalp; Samuel Krevor; Christopher Graves

2008-05-01T23:59:59.000Z

196

Static Temperature Survey At Blue Mountain Area (Fairbank Engineering,  

Open Energy Info (EERE)

Static Temperature Survey At Blue Mountain Area (Fairbank Engineering, Static Temperature Survey At Blue Mountain Area (Fairbank Engineering, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Static Temperature Survey At Blue Mountain Area (Fairbank Engineering, 2010) Exploration Activity Details Location Blue Mountain Area Exploration Technique Static Temperature Survey Activity Date Usefulness useful DOE-funding Unknown Notes Using a precision thermistor probe, EGI, University of Utah, obtained detailed temperature logs of eleven new mineral exploration holes drilled at Blue Mountain. The holes, ranging in depth from 99 to 244 meters (325 to 800 feet), were drilled in areas to the northeast, northwest and southwest of, and up to distances of two kilometers from, the earlier mineral exploration drill holes that encountered hot artesian flows. Unfortunately,

197

Accuracy in quantitative phase analysis of complex mineral ...  

Science Conference Proceedings (OSTI)

... Soil formed on a parent material rich in ferromagnesian minerals and amorphous soil minerals • Petroleum shale • Nickel laterite • Bauxite ...

2013-06-07T23:59:59.000Z

198

Minerals  

Science Conference Proceedings (OSTI)

Title, Author, Publisher, Product Type, In Stock, Date Published. Add to Cart, Image, Click on Title to view details, Member (Student) Price, Non-member Price.

199

Underground Distribution: Urban Network Practices Survey - 2012  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) has undertaken a multiyear research effort to identify and describe leading industry practices for managing urban network systems in the key functional areas of planning, design, construction, maintenance, operations, and safety. This report summarizes the results of the 2012 survey of urban network practices issued by EPRI and provides comparisons to a similar survey issued by EPRI in 2009.

2012-07-11T23:59:59.000Z

200

Analysis of concentrating PV-T systems for the commercial/industrial sector. Volume II. PV-T state-of-the-art survey and site/application pair selection and analysis  

DOE Green Energy (OSTI)

As part of a project to develop feasibility assessments, design procedures, and reference designs for total energy systems that could use actively cooled concentrating photovoltaic collectors, a survey was conducted to provide an overview of available photovoltaic-thermal (PV-T) technology. General issues associated with the design and installation of a PV-T system are identified. Electrical and thermal efficiencies for the line-focus Fresnel, the linear parabolic trough, and the point-focus Fresnel collectors are specified as a function of operating temperature, ambient temperature, and insolation. For current PV-T technologies, the line-focus Fresnel collector proved to have the highest thermal and electrical efficiencies, lowest array cost, and lowest land area requirement. But a separate feasibility analysis involving 11 site/application pairs showed that for most applications, the cost of the photovoltaic portion of a PV-T system is not recovered through the displacement of an electrical load, and use of a thermal-only system to displace the thermal load would be a more economical alternative. PV-T systems are not feasible for applications that have a small thermal load, a large steam requirement, or a high load return temperature. SAND82-7157/3 identifies the technical issues involved in designing a photovoltaic-thermal system and provides guidance for resolving such issues. Detailed PV-T system designs for three selected applications and the results of a trade-off study for these applications are presented in SAND82-7157/4. A summary of the major results of this entire study and conclusions concerning PV-T systems and applications is presented in SAND82-7157/1.

Schwinkendorf, W.E.

1984-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Table 1c. Off-Site Produced Energy (Site Energy)For Selected Industries,  

Gasoline and Diesel Fuel Update (EIA)

c c Page Last Modified: May 2010 Table 1c. Off-Site Produced Energy (Site Energy) for Selected Industries, 1998, 2002 and 2006 (Trillion Btu) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food 992 1,079 1,124 312 Beverage and Tobacco Products 109 104 101 313 Textile Mills 255 206 178 314 Textile Product Mills 49 60 72 315 Apparel 48 30 14 316 Leather and Allied Products 8 7 3 321 Wood Products 285 198 296 322 Paper 1,648 1,413 1,350 323 Printing and Related Support 97 98 85 324 Petroleum and Coal Products 1,475 1,290 1,434 325 Chemicals 3,377 3,154 2,772 326 Plastics and Rubber Products 327 347 336 327 Nonmetallic Mineral Products 921 960 1,105 331 Primary Metals 2,010 1,614 1,353 332 Fabricated Metal Products 441 387 396

202

EIA Energy Efficiency-Table 1b. Fuel Consumption for Selected Industries,  

Gasoline and Diesel Fuel Update (EIA)

b b Page Last Modified: May 2010 Table 1b. End Uses of Fuel Consumption (Site Energy) for Selected Industries, 1998, 2002, and 2006 (Trillion Btu) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food 1,044 1,116 1,186 312 Beverage and Tobacco Products 108 104 109 313 Textile Mills 254 205 178 314 Textile Product Mills 49 60 72 315 Apparel 48 30 14 316 Leather and Allied Products 8 7 3 321 Wood Products 504 375 445 322 Paper 2,744 2,361 2,354 323 Printing and Related Support 98 98 85 324 Petroleum and Coal Products 3,622 3,202 3,396 325 Chemicals 3,704 3,769 3,195 326 Plastics and Rubber Products 327 348 336 327 Nonmetallic Mineral Products 969 1,052 1,105 331 Primary Metals 2,576 2,123 1,744 332 Fabricated Metal Products 441 387 397

203

Natural balance of graminicolous aphids in Pakistan. Survey of populations  

E-Print Network (OSTI)

Natural balance of graminicolous aphids in Pakistan. Survey of populations Sulaiman HAMID Sind Sugar Industry Research Institute, 14-A, Latifabad III, Hyderabad Sind, Pakistan SUMMARY Aphids attacking gramineous crops were studied in seven climatically and ecologically different regions of Pakistan

Recanati, Catherine

204

NSLS Industrial User Program  

NLE Websites -- All DOE Office Websites (Extended Search)

| Industrial Program Coordinator | Publications Courtesy of The New York Times, Noah Berger The overall goal of the plan to enhance the NSLS facility's Industrial Users'...

205

Uranium industry annual 1997  

SciTech Connect

This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

NONE

1998-04-01T23:59:59.000Z

206

Construction Industry Institute  

Science Conference Proceedings (OSTI)

... in one of our country's most vital industries. ... An industry-led program to disseminate practical ... fire-proofing materials, connections, and steel trusses; ...

2010-10-05T23:59:59.000Z

207

Airborne Electromagnetic Survey | Open Energy Information  

Open Energy Info (EERE)

Airborne Electromagnetic Survey Airborne Electromagnetic Survey Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Airborne Electromagnetic Survey Details Activities (2) Areas (2) Regions (0) NEPA(1) Exploration Technique Information Exploration Group: Geophysical Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Electromagnetic Techniques Information Provided by Technique Lithology: provide data on rock type and mineral content Stratigraphic/Structural: Hydrological: can be used to detect changes in density of fluids and indicate if there is salt water intrusion Thermal: Cost Information Low-End Estimate (USD): 48.274,827 centUSD 0.0483 kUSD 4.827e-5 MUSD 4.827e-8 TUSD / mile Median Estimate (USD): 317.3831,738 centUSD 0.317 kUSD

208

Survey Background and Technical Information on CBECS  

U.S. Energy Information Administration (EIA) Indexed Site

Survey Background and Technical Information Survey Background and Technical Information Survey Background and Technical Information Survey Background The commercial sector encompasses a vast range of building types- service businesses, such as retail and wholesale stores, hotels and motels, restaurants, and hospitals, as well as certain buildings that would not be considered "commercial" in a traditional economic sense, such as public and private schools, correctional institutions, and religious and fraternal organizations. Excluded from the sector are the goods-producing industries: manufacturing, agriculture, mining, forestry and fisheries, and construction. Nearly all energy use in the commercial sector takes place in, or is associated with, the buildings that house these commercial activities. Analysis of the structures, activities, and equipment associated with different types of buildings is the clearest way to evaluate commercial sector energy use. The Commercial Buildings Energy Consumption Survey (CBECS) is a national-level sample survey of commercial buildings and their energy suppliers conducted quadrennially (previously triennially) by the Energy Information Administration (EIA). The 2003 CBECS was the eighth survey in the series begun in 1979. From 1979 to 1986, the survey was known as the Nonresidential Buildings Energy Consumption Survey, or NBECS.

209

First high-temperature electronics products survey 2005.  

Science Conference Proceedings (OSTI)

On April 4-5, 2005, a High-Temperature Electronics Products Workshop was held. This workshop engaged a number of governmental and private industry organizations sharing a common interest in the development of commercially available, high-temperature electronics. One of the outcomes of this meeting was an agreement to conduct an industry survey of high-temperature applications. This report covers the basic results of this survey.

Normann, Randy Allen

2006-04-01T23:59:59.000Z

210

Roadmap to the Project: Uranium Miners Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

suggested revisions of criteria for the compensation of lung cancer among underground uranium miners from the eligible regions of the U.S. Radioactive radon (more specifically...

211

Multiphase Sequestration Geochemistry: Model for Mineral Carbonation  

SciTech Connect

Carbonation of formation minerals converts low viscosity supercritical CO2 injected into deep saline reservoirs for geologic sequestration into an immobile form. Until recently the scientific focus of mineralization reactions with reservoir rocks has been those that follow an aqueous-mediated dissolution/precipitation mechanism, driven by the sharp reduction in pH that occurs with CO2 partitioning into the aqueous phase. For sedimentary basin formations the kinetics of aqueous-mediated dissolution/precipitation reactions are sufficiently slow to make the role of mineralization trapping insignificant over a century period. For basaltic saline formations aqueous-phase mineralization progresses at a substantially higher rate, making the role of mineralization trapping significant, if not dominant, over a century period. The overlooked mineralization reactions for both sedimentary and basaltic saline formations, however, are those that occur in liquid or supercritical CO2 phase; where, dissolved water appears to play a catalyst role in the formation of carbonate minerals. A model is proposed in this paper that describes mineral carbonation over sequestration reservoir conditions ranging from dissolved CO2 in aqueous brine to dissolved water in supercritical CO2. The model theory is based on a review of recent experiments directed at understanding the role of water in mineral carbonation reactions of interest in geologic sequestration systems occurring under low water contents.

White, Mark D.; McGrail, B. Peter; Schaef, Herbert T.; Hu, Jian Z.; Hoyt, David W.; Felmy, Andrew R.; Rosso, Kevin M.; Wurstner, Signe K.

2011-04-01T23:59:59.000Z

212

Carbon Dioxide Sequestration: Aqueous Mineral Carbonation Studies...  

NLE Websites -- All DOE Office Websites (Extended Search)

appears independent of test time * Agitation phenomena (?) Solid product passes EPA TCLP Pittsburgh, PA, August 8, 2001 National Energy Technology Laboratory: Mineral...

213

Industrial Applications of Renewable Resources  

Science Conference Proceedings (OSTI)

Archive of Industrial Applications of Renewable Resources Industrial Applications of Renewable Resources Cincinnati, Ohio, USA Industrial Applications of Renewable Resources ...

214

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 51 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and nonenergy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Module calculates

215

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and non-energy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Demand Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Demand Module calculates energy consumption for the four Census Regions (see Figure 5) and disaggregates the energy consumption

216

Annual Capital Expenditures Survey | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Annual Capital Expenditures Survey Annual Capital Expenditures Survey BusinessUSA Data/Tools Apps Challenges Let's Talk BusinessUSA You are here Data.gov » Communities » BusinessUSA » Data Annual Capital Expenditures Survey Dataset Summary Description Provides national estimates of investment in new and used buildings and other structures, machinery, and equipment by U.S. nonfarm businesses with and without employees. Data are published by industry for companies with employees for NAICS 3-digit and selected 4-digit industries. Data on the amount of business expenditures for new plant and equipment and measures of the stock of existing facilities are critical to evaluate productivity growth, the ability of U.S. business to compete with foreign business, changes in industrial capacity, and measures of overall economic performance. In addition, ACES data provide industry analysts with capital expenditure data for market analysis, economic forecasting, identifying business opportunities and developing new and strategic plans. The ACES is an integral part of the Federal Government's effort to improve and supplement ongoing statistical programs. Private companies and organizations,, educators and students, and economic researchers use the survey results for analyzing and conducting impact evaluations on past and current economic performance, short-term economic forecasts, productivity, long-term economic growth, tax policy, capacity utilization, business fixed capital stocks and capital formation, domestic and international competitiveness trade policy, market research, and financial analysis.

217

Industrial Geospatial Analysis Tool for Energy Evaluation  

E-Print Network (OSTI)

IGATE-E is an industrial energy analysis tool. The tool is intended to be a decision support and planning tool to a wide spectrum of energy analysts, engineers, researchers, government organizations, private consultants, industry partners, and alike. The tool applies statistical modeling to multiple datasets and provides information at the geospatial resolution of zip code using bottom up approaches. Within each zip code, the current version of the tool estimates electrical energy consumption of manufacturing industries based on each type of industries using information from DOE's Industrial Assessment Center database (IAC-DB) and DOE's Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition to commercially available databases such as the Manufacturing News database (MNI, Inc.). Ongoing and future work include adding modules for the predictions of fuel energy consumption streams, manufacturing process steps energy consumption, major energy intensive processes (EIPs) within each industry type among other metrics of interest. The tool utilizes the DOE EIA-MECS energy survey data to validate bottom-up estimates and permits several statistical examinations.

Alkadi, N.; Starke, M.; Ma, O.; Nimbalkar, S.; Cox, D.; Dowling, K.; Johnson, B.; Khan, S.

2013-01-01T23:59:59.000Z

218

1998 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

8 User Survey Results 1998 User Survey Results Respondent Summary NERSC has completed its first user survey since its move to Lawrence Berkeley National Laboratory. The survey is...

219

Robotic Surveying  

SciTech Connect

ZAPATA ENGINEERING challenged our engineers and scientists, which included robotics expertise from Carnegie Mellon University, to design a solution to meet our client's requirements for rapid digital geophysical and radiological data collection of a munitions test range with no down-range personnel. A prime concern of the project was to minimize exposure of personnel to unexploded ordnance and radiation. The field season was limited by extreme heat, cold and snow. Geographical Information System (GIS) tools were used throughout this project to accurately define the limits of mapped areas, build a common mapping platform from various client products, track production progress, allocate resources and relate subsurface geophysical information to geographical features for use in rapidly reacquiring targets for investigation. We were hopeful that our platform could meet the proposed 35 acres per day, towing both a geophysical package and a radiological monitoring trailer. We held our breath and crossed our fingers as the autonomous Speedrower began to crawl across the playa lakebed. We met our proposed production rate, and we averaged just less than 50 acres per 12-hour day using the autonomous platform with a path tracking error of less than +/- 4 inches. Our project team mapped over 1,800 acres in an 8-week (4 days per week) timeframe. The expertise of our partner, Carnegie Mellon University, was recently demonstrated when their two autonomous vehicle entries finished second and third at the 2005 Defense Advanced Research Projects Agency (DARPA) Grand Challenge. 'The Grand Challenge program was established to help foster the development of autonomous vehicle technology that will some day help save the lives of Americans who are protecting our country on the battlefield', said DARPA Grand Challenge Program Manager, Ron Kurjanowicz. Our autonomous remote-controlled vehicle (ARCV) was a modified New Holland 2550 Speedrower retrofitted to allow the machine-actuated functions to be controlled by an onboard computer. The computer-controlled Speedrower was developed at Carnegie Mellon University to automate agricultural harvesting. Harvesting tasks require the vehicle to cover a field using minimally overlapping rows at slow speeds in a similar manner to geophysical data acquisition. The Speedrower had demonstrated its ability to perform as it had already logged hundreds of acres of autonomous harvesting. This project is the first use of autonomous robotic technology on a large-scale for geophysical surveying.

Suzy Cantor-McKinney; Michael Kruzic

2007-03-01T23:59:59.000Z

220

DC Resistivity Survey (Dipole-Dipole Array) | Open Energy Information  

Open Energy Info (EERE)

DC Resistivity Survey (Dipole-Dipole Array) DC Resistivity Survey (Dipole-Dipole Array) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: DC Resistivity Survey (Dipole-Dipole Array) Details Activities (1) Areas (1) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Geophysical Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Electrical Profiling Configurations Information Provided by Technique Lithology: Rock composition, mineral and clay content Stratigraphic/Structural: Detection of permeable pathways, fracture zones, faults Hydrological: Resistivity influenced by porosity, grain size distribution, permeability, fluid saturation, fluid type and phase state of the pore water Thermal: Resistivity influenced by temperature

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Direct-Current Resistivity Survey | Open Energy Information  

Open Energy Info (EERE)

Direct-Current Resistivity Survey Direct-Current Resistivity Survey Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Direct-Current Resistivity Survey Details Activities (65) Areas (34) Regions (4) NEPA(0) Exploration Technique Information Exploration Group: Geophysical Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Electrical Techniques Information Provided by Technique Lithology: Rock type, mineral and clay content may be inferred. Stratigraphic/Structural: Determination of fracture zones, faults, depth to groundwater aquifers. Hydrological: Resistivity influenced by porosity, permeability, fluid saturation, fluid type and phase state of the pore water. Thermal: Resistivity influenced by temperature.[1] Cost Information

222

A survey of software testing practices in Canada  

Science Conference Proceedings (OSTI)

Software testing is an important activity in the software development life-cycle. In an earlier study in 2009, we reported the results of a regional survey of software testing practices among practitioners in the Canadian province of Alberta. To get ... Keywords: Canada, Industry practices, Software testing, Survey

Vahid Garousi; Junji Zhi

2013-05-01T23:59:59.000Z

223

Sponsors of CIEEDAC: Natural Resources Canada, Canadian Industry Program for Energy Conservation, Aluminium Industry Association, Canadian Petroleum Products Institute, Canadian Portland Cement Association, Canadian Pulp  

E-Print Network (OSTI)

2. Industrial Consumption of Energy, and the Quarterly Report of Energy Supply and Demand 3. Annual Canada (NRCan): 1. Annual Survey of Manufacturers (ASM, from STC) 2. Industrial Consumption of Energy consistent source of historical data related to energy consumption in all Canadian industry by region

224

Climate VISION: Industry Associations  

Office of Scientific and Technical Information (OSTI)

Industry Associations Industry Associations Aluminum Aluminum Association (Coordinating aluminum industry Climate VISION activities) The Aluminum Association, Inc. is the trade association for producers of primary aluminum, recyclers and semi-fabricated aluminum products, as well as suppliers to the industry. The Association provides leadership to the industry through its programs and services which aim to enhance aluminum's position in a world of proliferating materials, increase its use as the "material of choice," remove impediments to its fullest use, and assist in achieving the industry's environmental, societal, and economic objectives. Automobile Manufacturers Alliance of Automobile Manufacturers (Coordinating automobile industry Climate VISION activities) The Alliance of Automobile Manufacturers, Inc. is a trade association

225

Alternative Fuels - A New Field For Mine Surveying | Open Energy  

Open Energy Info (EERE)

Alternative Fuels - A New Field For Mine Surveying Alternative Fuels - A New Field For Mine Surveying Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Alternative Fuels - A New Field For Mine Surveying Details Activities (0) Areas (0) Regions (0) Abstract: Due to the public's increased interest in renewable energies and the "Erneuerbare Energien Gesetz" (EEG) from February 2000, geothermal energy and other alternative or renewable energies gain more and more importance. As far as Germany is concerned, geothermal energy and coal bed/mine methane are considered as mineral resources according to the German mining law. This demands the participation of mine surveyors/mineral resources managers from the planning to the production stage and even beyond it. The main tasks that have to be fulfilled are, among others,

226

Exploration for uranium deposits, Grants mineral belt  

Science Conference Proceedings (OSTI)

Uranium ore deposits in the Grants mineral belt, New Mexico, occur in fluvial sandstones in the Morrison Formation (Jurassic). Uranium mineralization is concentrated by a dark-gray to black substance that has been identified as humate, which is derived from decaying vegetation. Black ore is truncated by overlying sandstone in at least three ore deposits, documenting an early age for mineralization. Ore deposits in the Grants mineral belt vary greatly in size and shape, tend to occur in clusters, and often present difficult drill targets. Current exploration is largely a matter of drilling in stages to distinguish favorable from unfavorable ground on a wide spacing, to seek mineralization in favorable ground, and to conduct close-spaced drilling in mineralized areas. Criteria for favorability differ among exploration groups but generally include 1) presence of a host sandstone, 2) anomalous mineralization, 3) color of the host rock, 4) presence of carbonaceous matter, and 5) position of the area relative to mineralized trends. A description of the drilling sequence, from ore discovery to the development of a mine at the Johnny M deposit (in the east part of the Ambrosia Lake district), exemplifies the problem of predicting where orebodies may occur. A study of the drill data at the Johnny M indicates the uranium ore is not related to specific geologic features other than humate, which is commonly associated with coalified plant fragments in mudstone-rich parts of the host sandstone.

Fitch, D.C.

1980-01-01T23:59:59.000Z

227

Nevada Division of Minerals | Open Energy Information  

Open Energy Info (EERE)

Nevada Division of Minerals Nevada Division of Minerals Jump to: navigation, search Logo: Nevada Division of Minerals Name Nevada Division of Minerals Address 400 W. King St. #106 Place Carson City, Nevada Zip 89703 Website http://minerals.state.nv.us/ Coordinates 39.16409°, -119.7699779° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.16409,"lon":-119.7699779,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

228

Case Studies of Industrial Cogeneration in the U. S.  

E-Print Network (OSTI)

This paper describes the results of a survey and evaluation of plant-specific information on industrial cogeneration. The study was performed as part of a project sponsored by the Electric Power Research Institute to evaluate Dual Energy Use Systems (DEUS). The purpose of this project was to evaluate site specific data on DEUS from the utility perspective, identify promising candidates, and define R&D opportunities. The first major task in this DEUS project was a survey of industrial cogeneration sites to identify the technoeconomic and institutional factors affecting the success of cogeneration systems in industry. Sites were selected based on a mix of industry types, geographic location, type of cogeneration system, generating capacity, age of plant and other characteristics. Site-specific surveys were conducted and supplemented by information from secondary sources such as FERC and DOE statistical data systems. This paper presents information on 17 cogeneration facilities. Also presented is information on the perspectives of the relevant utilities.

Limaye, D. R.; Isser, S.; Hinkle, B.; Hough, T.

1980-01-01T23:59:59.000Z

229

Manufacturing Energy Consumption Survey (MECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

1 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive 1 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive Data Methodology & Forms + EXPAND ALL Consumption of Energy for All Purposes (First Use) Total Primary Consumption of Energy for All Purposes by Census Region, Industry Group, and Selected Industries, 1991: Part 1 (Estimates in Btu or Physical Units) XLS Total Primary Consumption of Energy for All Purposes by Census Region, Industry Group, and Selected Industries, 1991: Part 2 (Estimates in Trillion Btu) XLS Total Consumption of LPG, Distillate Fuel Oil, and Residual Fuel Oil for Selected Purposes by Census Region, Industry Group, and Selected Industries, 1991 (Estimates in Barrels per Day) XLS Total Primary Consumption of Energy for All Purposes by Census Region and Economic Characteristics of the Establishment, 1991 (Estimates in Btu or Physical Units) XLS

230

High Tech and Industrial Systems Group  

NLE Websites -- All DOE Office Websites (Extended Search)

High Tech and Industrial Systems Group High Tech and Industrial Systems Group Some of the largest energy users in today's economy are high tech buildings and industrial systems. They operate up to 24 hours per day with energy intensities much greater than typical commercial or residential buildings, and they are essential to the national economy. High-tech buildings, such as laboratories, cleanrooms, data centers, and hospitals, are characterized by large base-loads, continuous operation, and high energy-use intensities. These buildings crosscut many industries and institutions. Group activities and products include: benchmarking surveys and metrics, case study reports, technology development, technology demonstrations, assessment and profiling tools, best practice guides, workshops, training guides, and development of other strategies.

231

Carbon Emissions: Iron and Steel Industry  

U.S. Energy Information Administration (EIA) Indexed Site

Iron and Steel Industry Iron and Steel Industry Carbon Emissions in the Iron and Steel Industry The Industry at a Glance, 1994 (SIC Code: 3312) Total Energy-Related Emissions: 39.9 million metric tons of carbon (MMTC) -- Pct. of All Manufacturers: 10.7% -- Nonfuel Emissions: 22.2 MMTC Total First Use of Energy: 1,649 trillion Btu -- Pct. of All Manufacturers: 7.6% Nonfuel Use of Energy: 886 trillion Btu (53.7%) -- Coal: 858 trillion Btu (used to make coke) Carbon Intensity: 24.19 MMTC per quadrillion Btu Energy Information Administration, "1994 Manufacturing Energy Consumption Survey" and Emissions of Greenhouse Gases in the United States 1998 Energy-Related Carbon Emissions, 1994 Source of Carbon Carbon Emissions (million metric tons) All Energy Sources 39.9 Coal 22.7

232

A Manpower Assessment of the Geothermal Industry  

DOE Green Energy (OSTI)

The authors were asked to estimate the net employment gains in the geothermal industry from 1980 to 1985 and 1990. Method was by survey. Response rates were high, so the estimates here likely reflect industry knowledge and outlooks at the start of the most active construction decade of the U.S. geothermal industry. An untitled table following Table IV-1 is of great interest because it breaks out employment requirement estimates for different phases/aspects of project development, i.e., exploration and resource assessment, exploratory drilling, production drilling, power plant construction, feed system (field piping) construction, field operation and maintenance, power plant operation and maintenance, and transmission line construction. Estimates like these are rare in the U.S. geothermal literature. While these estimates are dated, they comprise an historical economic baseline from which improvements in labor use in the geothermal industry might be constructed. (DJE 2005)

None

1979-08-24T23:59:59.000Z

233

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 12 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module forecasts energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region forecast using the SEDS 27 data.

234

Industrial Decision Making  

E-Print Network (OSTI)

Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy although, freight costs, favorable exchange rates and high capacity utilization will encourage future industrial investment. Industry will eventually enter a new period of major investment. Future industrial investment will be an opportunity to influence the energy efficiency of these facilities for generations to come. Program managers must begin engaging industrial customers now, in order to exploit this unprecedented opportunity to change future energy use patterns. This paper reviews recent market trends and industrial investment decision-making. The paper will also address several important questions: • Why has industrial investment declined? • What is the outlook for industrial investment? • How can programs engage industry for future opportunities?

Elliott, R. N.; McKinney, V.; Shipley, A.

2008-01-01T23:59:59.000Z

235

California`s forest products industry: 1992. Forest Service resource bulletin  

SciTech Connect

The report presents the findings of a survey of primary forest products industries in California for 1992. The survey included the following sectors: Lumber, pulp and board; shake and shingle; export; and post, pole, and piling. Veneer and plywood mills are not included because they could not be presented without disclosng critical details. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of logs consumed, and disposition of mill residence.

Ward, F.R.

1995-03-01T23:59:59.000Z

236

Oregon`s forest products industry: 1992. Forest Service resource bulletin  

SciTech Connect

The report presents the findings of a survey of primary forest products industries in Oregon for 1992. The survey included the following sectors; lumber; veneer and plywood; pulp and board; shake and shingle; export; and post, pole, and piling. Tables presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of logs consumed, and disposition of mill residues.

Ward, F.R.

1995-03-01T23:59:59.000Z

237

Innovative Carbon Dioxide Sequestration from Flue Gas Using an In-Duct Scrubber Coupled with Alkaline Clay Mineralization  

NLE Websites -- All DOE Office Websites (Extended Search)

Innovative Carbon Dioxide Sequestration Innovative Carbon Dioxide Sequestration from Flue Gas Using an In-Duct Scrubber Coupled with Alkaline Clay Mineralization Background The United States Department of Energy (DOE) is leading an effort to find novel approaches to reduce carbon dioxide (CO 2 ) emissions from industrial sources. The Industrial Carbon Capture and Sequestration (ICCS) program is funded by the American Recovery and Reinvestment Act (ARRA) to encourage development of processes that

238

FAQs for Survey Form EIA-821  

Gasoline and Diesel Fuel Update (EIA)

21 21 What is the purpose of the EIA-821 survey? The EIA-821 survey is used to collect annual data on the sales of distillate and residual fuel oils, and kerosene to various categories of energy users at the state level. How is this data used? The data collected on the EIA-821 survey are used by EIA and the Department of Energy (DOE) in determining petroleum product supply and demand changes. In addition, the data are used by Federal, State, and local agencies, Congress, industry analysts, trade publications, academia, and the public to analyze, model and forecast petroleum product sales by state and energy use category. Where can I find published data from the EIA-821 survey? The annual data are published in the Fuel Oil and Kerosene Sales. The Fuel Oil and Kerosene Sales report provides information, illustrations

239

Industrial production index forecast: Methods comparison  

Science Conference Proceedings (OSTI)

The purpose of this work is to investigate the suitability of different methods as short term forecast tools. It is studied and compared the application of the Kalman filter method with other forecasting methods when applied to a set of qualitative and quantitative information. The work data set is made of qualitative surveys of conjunture and the industrial production index (IPI). The objective is the attainment of short term forecast models for the Portuguese IPI of the transforming industry. After the previous treatment of the data

M. Filomena Teodoro

2012-01-01T23:59:59.000Z

240

Oil, Gas, and Minerals, Exploration and Production, Lease of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oil, Gas, and Minerals, Exploration and Production, Lease of Public Land (Iowa) Oil, Gas, and Minerals, Exploration and Production, Lease of Public Land (Iowa) Eligibility Utility...

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

DOE - Office of Legacy Management -- International Minerals and...  

Office of Legacy Management (LM)

International Minerals and Chemical Corp - Pilot Plant - FL 02 FUSRAP Considered Sites Site: International Minerals and Chemical Corp - Pilot Plant (FL.02) Designated Name: Not...

242

Relations Of Ammonium Minerals At Several Hydrothermal Systems...  

Open Energy Info (EERE)

minerals at known hydrothermal systems is critical for the proper interpretation of remote sensing data and for testing of possible links to mineralization. Submicroscopic...

243

"Terrywallaceite" now in official roster of known minerals  

NLE Websites -- All DOE Office Websites (Extended Search)

metallic-black crystals of Terrywallaceite were found in the Julcani Mining District of Peru. June 8, 2011 The mineral "Terrywallaceite" The mineral "Terrywallaceite" I am honored...

244

Underground radio technology saves miners and emergency response...  

NLE Websites -- All DOE Office Websites (Extended Search)

Underground radio technology saves miners and emergency response personnel Underground radio technology saves miners and emergency response personnel Founded through LANL, Vital...

245

User_LaunchSurvey  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Completing Assigned Survey and Completing Assigned Survey © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Launching and Completing Assigned Survey Purpose The purpose of this job aid is to guide users through the step-by-step process of launching and completing assigned surveys. Task A. Launch and Complete Assigned Survey From the Home page, filter the To-Do List to show only Surveys. Hover over the course evaluation title. Click Open. 1 2 3 3 2 1 Launch and Complete Assigned Survey 6 Steps Task A SuccessFactors Learning v 6.4 User Job Aid Launching and Completing Assigned Survey © 2011 SuccessFactors, Inc. - 2 - SuccessFactors Learning Complete the survey by selecting the radio button for the appropriate rating

246

A survey of thin-film solar photovoltaic industry & technologies  

E-Print Network (OSTI)

A new type of solar cell technology using so-called thin-film solar photovoltaic material has the potential to make a great impact on our lives. Because it uses very little or no silicon at all, thin- film (TF) solar ...

Grama, Sorin

2007-01-01T23:59:59.000Z

247

Users from Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Users from Industry Users from Industry Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

248

Industrial | Open Energy Information  

Open Energy Info (EERE)

to: navigation, search Click to return to AEO2011 page AEO2011 Data From AEO2011 report . Market Trends Despite a 54-percent increase in industrial shipments, industrial energy...

249

The Copper Industry  

Science Conference Proceedings (OSTI)

...These products are sold to a wide variety of industrial users. Certain mill productsâ??chiefly wire, cable, and most

250

NIST Industry Day 2012  

Science Conference Proceedings (OSTI)

... at www.fedbizopps.gov. Search NIST-AMD-INDUSTRY-DAY-2012 in the Quick Search engine. Deadline for registration ...

2013-08-30T23:59:59.000Z

251

Industrial Development Projects (Montana)  

Energy.gov (U.S. Department of Energy (DOE))

This legislation authorizes municipalities and counties to issue bonds or interest coupons to finance industrial projects, including energy generation facilities.

252

America's Booming Wind Industry  

Energy.gov (U.S. Department of Energy (DOE))

Sharing key findings from two new Energy Department reports that highlight the record growth of America's wind industry.

253

ORISE: Characterization surveys  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization surveys Characterization surveys An ORISE technicians performs a characterization survey The Oak Ridge Institute for Science and Education (ORISE) performs independent, objective characterization surveys to define the extent of radiological contamination at sites scheduled for decontamination and decommissioning (D&D). A fundamental aspect of all D&D projects, characterization surveys provide guidance to determine the best remediation procedures and are a cost-effective method of ensuring a site meets preliminary regulatory standards. ORISE designs characterization surveys using the data quality objectives process. This approach focuses on the particular objective of characterization, and ensures that only the data needed to address the characterization decisions are collected. Data collection efforts are

254

California Industrial Energy Efficiency Potential  

SciTech Connect

This paper presents an overview of the modeling approach andhighlights key findings of a California industrial energy efficiencypotential study. In addition to providing estimates of technical andeconomic potential, the study examines achievable program potential undervarious program-funding scenarios. The focus is on electricity andnatural gas savings for manufacturing in the service territories ofCalifornia's investor-owned utilities (IOUs). The assessment is conductedby industry type and by end use. Both crosscutting technologies andindustry-specific process measures are examined. Measure penetration intothe marketplace is modeled as a function of customer awareness, measurecost effectiveness, and perceived market barriers. Data for the studycomes from a variety of sources, including: utility billing records, theEnergy Information Association (EIA) Manufacturing Energy ConsumptionSurvey (MECS), state-sponsored avoided cost studies, energy efficiencyprogram filings, and technology savings and cost data developed throughLawrence Berkeley National Laboratory (LBNL). The study identifies 1,706GWh and 47 Mth (million therms) per year of achievable potential over thenext twelve years under recent levels of program expenditures, accountingfor 5.2 percent of industrial electricity consumption and 1.3 percent ofindustrial natural gas consumption. These estimates grow to 2,748 GWh and192 Mth per year if all cost-effective and achievable opportunities arepursued. Key industrial electricity end uses, in terms of energy savingspotential, include compressed air and pumping systems that combine toaccount for about half of the total achievable potential estimates. Fornatural gas, savings are concentrated in the boiler and process heatingend uses, accounting for over 99 percent to total achievablepotential.

Coito, Fred; Worrell, Ernst; Price, Lynn; Masanet, Eric; RafaelFriedmann; Rufo, Mike

2005-06-01T23:59:59.000Z

255

Carbon dioxide sequestration in cement kiln dust through mineral carbonation  

Science Conference Proceedings (OSTI)

Carbon sequestration through the formation of carbonates is a potential means to reduce CO{sub 2} emissions. Alkaline industrial solid wastes typically have high mass fractions of reactive oxides that may not require preprocessing, making them an attractive source material for mineral carbonation. The degree of mineral carbonation achievable in cement kiln dust (CKD) under ambient temperatures and pressures was examined through a series of batch and column experiments. The overall extent and potential mechanisms and rate behavior of the carbonation process were assessed through a complementary set of analytical and empirical methods, including mass change, thermal analysis, and X-ray diffraction. The carbonation reactions were carried out primarily through the reaction of CO{sub 2} with Ca(OH){sub 2}, and CaCO{sub 3} was observed as the predominant carbonation product. A sequestration extent of over 60% was observed within 8 h of reaction without any modifications to the waste. Sequestration appears to follow unreacted core model theory where reaction kinetics are controlled by a first-order rate constant at early times; however, as carbonation progresses, the kinetics of the reaction are attenuated by the extent of the reaction due to diffusion control, with the extent of conversion never reaching completion. 35 refs., 3 figs., 1 tab.

Deborah N. Huntzinger; John S. Gierke; S. Komar Kawatra; Timothy C. Eisele; Lawrence L. Sutter [University of Michigan, Ann Arbor, MI (United States). Department of Civil and Environmental Engineering

2009-03-15T23:59:59.000Z

256

Minerals on School and Public Lands  

Energy.gov (U.S. Department of Energy (DOE))

The Commissioner of School and Public Lands is authorized to lease the mineral interests of such lands for development. Section 5-7 of the SD Codified Laws describes provisions for the leasing of...

257

Hydrothermal alteration mineral mapping using hyperspectral imagery...  

Open Energy Info (EERE)

front of the Stillwater Mountain Range inDixie Valley, Nevada. Analysis of this data set reveals that severaloutcrops of these altered minerals exist in the area, and thatone...

258

Oil, Gas, and Metallic Minerals (Iowa)  

Energy.gov (U.S. Department of Energy (DOE))

Operators of oil, gas, and metallic mineral exploration and production operations are required to obtain a drilling permit from the Iowa Department of Natural Resources and file specific forms with...

259

Sustainable growth and valuation of mineral reserves  

E-Print Network (OSTI)

The annual change in the value of an in-ground mineral is equal to the increase or decrease of inventories ("reserves"), multiplied by the market value of a reserve unit. The limited shrinking resource base does not exist. ...

Adelman, Morris Albert

1994-01-01T23:59:59.000Z

260

Water and Energy in Mineral Processing  

Science Conference Proceedings (OSTI)

The theme will be "Water and energy in mineral processing". ... Analysis of Polymer Adsorption on Hematite Using Zeta Potential Distributions ... Trends with Selection and Sizing Large Flotation Circuits- What's Available in the Market Place.

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Mineral Leases by Political Subdivisions (Texas)  

Energy.gov (U.S. Department of Energy (DOE))

This legislation authorizes local political subdivisions to lease lands they own for the development of mineral interests, including coal and lignite. A public hearing process is required prior to...

262

Geochronologic studies in the Grants mineral belt  

SciTech Connect

Geologic observation coupled with radiometric age dating can be used to assess ages of ore formation and, in some cases, ages of sedimentation in the Grants mineral belt. Rb-Sr studies indicate the earliest mineralization is trend ore at Ambrosia Lake and Smith Lake, dated at 139 +- 9.5 m.y. This date is similar to that for barren-rock montmorillonite from the Jackpile sandstone (Late Jurassic): 142 +- 14 m.y.; it may be used, with caution, to indicate the minimum age of sedimentation for the Morrison Formation. Geologic evidence indicates epigenetic rather than syngenetic ore formation. Barren-rock montmorillonites from Ambrosia Lake yield a poorly defined isochron of 132 +- 26 m.y. Early formed ore at the Jackpile-Paguate mine, Laguna district, was remobilized and reprecipitated at 113 +- 7 m.y. This date is older than the range of dates for the Dakota Formation (Cretaceous) and Mancos Shale. The 113 +- 7 m.y. mid-Cretaceous date for the Jackpile-Paguate ore is consistent with geologic evidence; geologic control suggests that other ore deposits are post-Late Jurassic but pre-Dakota Formation. Based on geologic evidence, mineralization in the Dakota Formation is thought to be very young. Laramide mineralization (60 to 70 m.y.) is evidenced by the presence of some stack ore. At least one uranium deposit, located partly in oxidized ground at the main redox front of the Grants mineral belt, may represent Tertiary mineralization; the clay-mineral Rb-Sr systematics of this deposit have been severely perturbed. Younger mineralization is indicated by U-Pb dates on uranophane (9 to 10 m.y.), and Pleistocene mineralization is noted for some ore. U-Pb dates of U/sup 4 +/ -rich ore minerals cluster between 80 and 100 m.y., although some are as old as 140 to 150 m.y. K-Ar dates on clay minerals range from 49 to 138 m.y. The reasons for this scatter are not known, although loss of radiogenic /sup 40/Ar due to burial is probable.

Brookins, D.G.

1980-01-01T23:59:59.000Z

263

Transforming the Oil Industry into the Energy Industry  

E-Print Network (OSTI)

innovation and lets industry pick winning technologies. TheTransforming the Oil Industry intothe Energy Industry BY DANIEL SPERLING AND SONIA YEH A C C E

Sperling, Daniel; Yeh, Sonia

2009-01-01T23:59:59.000Z

264

From Industry Protection to Industry Promotion: IT Policy in Brazil  

E-Print Network (OSTI)

Brazilian banking automation industry. Science, TechnologyBrazilian liberalisation of the IT industry on technologicalWorking paper. Computer Industry Almanac, Inc. (1999).

Botelho, Antonio Jose Junqueira; Dedrick, Jason; Kraemer, Kenneth L.; Tigre, Paulo Bastos

1999-01-01T23:59:59.000Z

265

Mineral Wool Production Monitoring Using Neural Networks  

E-Print Network (OSTI)

Homogeneity of the primary layer in mineral wool production process is required for high quality products. State-of-the-art measurement techniques for the evaluation of primary layer homogeneity are very slow and can only be applied after the product is manufactured. We present here a method that enables on-line monitoring and control and is based on experimental modeling using neural networks. The experimental method is based on image acquisition and image processing of the mineral wool primary layer structure. As a estimator of the mineral wool primary layer structure and quality, the weight of the primary wool layer is used, measured by an on- line weighting device in four locations of the conveyor belt. The instrumentation of on- line weighting device was upgraded for the purpose of the present experiment and enabled high speed acquisition of all measurement channels. The structure of the mineral wool primary layer was measured by visualization of the modified entrance to the on- line balance using a CCD camera. All data channels were simultaneously sampled. Radial basis neural networks are used for prediction. The structure of the mineral wool primary layer is predicted on the basis of experimentally provided weights data. The learning set consists of weights- images pairs. The prediction of the mineral wool primary layer structure consists of providing only weights. A good agreement between statistical properties of measured and modeled structures of the primary wool layer like spatial homogeneity of the primary mineral wool layer thickness, is shown. The results of the study confirm that the time- delayed vector of weights bears enough information for the monitoring of the production process. The modeling of primary mineral wool structure is of lesser quality due to high dimensionality of the modeled variable.

Marko Ho?evar; Brane Širok; Bogdan Blagojevi?

2005-01-01T23:59:59.000Z

266

Utility FGD Survey, January--December 1989  

Science Conference Proceedings (OSTI)

The Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.

Hance, S.L.; McKibben, R.S.; Jones, F.M. (IT Corp., Cincinnati, OH (United States))

1992-03-01T23:59:59.000Z

267

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry banner Industry banner Neutron scattering research has applications in practically every field, and neutron research at ORNL is leading to productive partnerships with the industrial and business communities. We welcome proposals for all types of research, including those involving proprietary work. Recent studies have led to discoveries with potential applications in fields such as medicine, energy, and various metals technologies. For more information, please see our recent research highlights. Research Collaborations Industry-Driven Research Benefits Plastics Manufacturing Corning uses VULCAN to test limits of ceramic material for car emission controls, filtration devices Neutrons Probe Inner Workings of Batteries Industry and Neutron Science: Working To Make a Match

268

Manufacturing Energy Consumption Survey (MECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

10 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive 10 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive Data Methodology & Forms + EXPAND ALL Consumption of Energy for All Purposes (First Use) Table 1.1 By Mfg. Industry & Region (physical units) XLS PDF Table 1.2 By Mfg. Industry & Region (trillion Btu) XLS PDF Table 1.3 By Value of Shipments & Employment Size Category & Region XLS PDF Table 1.5 By Further Classification of "Other" Energy Sources XLS PDF Energy Used as a Nonfuel (Feedstock) Table 2.1 By Mfg. Industry & Region (physical units) XLS PDF Table 2.2 By Mfg. Industry & Region (trillion Btu) XLS PDF Table 2.3 By Value of Shipments & Employment Size Category XLS PDF Energy Consumption as a Fuel Table 3.1 By Mfg. Industry & Region (physical units) XLS PDF

269

INFRASTRUCTURE SURVEY 2011  

E-Print Network (OSTI)

10 Appendices Appendix 1. Glossary of Terminology and Definitions 11 Appendix 2. Survey Definitions. There is a Glossary of Terminology and Definitions (Appendix 1). The survey form is Appendix 3 of this Report

270

Users from Industry  

NLE Websites -- All DOE Office Websites (Extended Search)

Users from Industry Print Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial users to access our user facilities and engage in productive relationships with our scientific and engineering staff. Examples of past and current research conducted at the ALS can be viewed on the Industry @ ALS Web page. There are several modes of access; the ALS User and Scientific Support Groups are especially committed to helping new industrial users gain a foothold in our user community and welcome inquiries about how to make that happen.

271

ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry (December 2002)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MINING MINING INDUSTRY OF THE FUTURE December 2002 ENERGY AND ENVIRONMENTAL PROFILE OF THE U.S. MINING INDUSTRY ENERGY AND ENVIRONMENTAL PROFILE OF THE U.S. MINING INDUSTRY December 2002 Prepared By: BCS, Incorporated Prepared for U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Preface The U.S. Department of Energy and the National Mining Association are working in partnership to implement the Mining Industry of the Future strategy. Cooperatively, the two organizations selected specific mineral commodities to review in the Mining Industry Profile. These mineral commodities selected are those that require significant energy to extract and prepare for a first saleable product, and have the potential for energy and environmental improvement through research and development. The eight groups of

272

Tobacco Industry Involvement in Colorado  

E-Print Network (OSTI)

Accessed May 25, 2004) Industry Summary. 1992 (est. ).11 May 2004) Tobacco Industry Involvement in Colorado Pageor (800) LUNG-USA. Tobacco Industry Involvement in Colorado

Landman, BA, Anne; Bialick, Peter

2004-01-01T23:59:59.000Z

273

For Industry | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

R&D accelerates battery technology | More news Home | Connect with ORNL | For Industry For Industry | For Industry SHARE There are a few different way of "working" with...

274

Method for the Production of Mineral Wool and Iron from Serpentine Ore  

mineral wools. The mineral wool product yields advantages similar to asbestos while eliminating its inherent detriments.

275

THE BLACK-EARED MINER A DECADE OF RECOVERY  

E-Print Network (OSTI)

THE BLACK-EARED MINER A DECADE OF RECOVERY David Baker-Gabb 2007 #12;Copyright © 2007. All or otherwise without prior written permission. The Black-eared Miner. A Decade of Recovery. © 2007 Black-eared Miner Recovery Team. Recommended citation: Baker-Gabb, D. (2007). The Black-eared Miner. A Decade

Frappell, Peter

276

A Method for Detecting Miners in Underground Coal Mine Videos  

Science Conference Proceedings (OSTI)

Detecting miners in underground coal mine videos is significant for the production safety. But, the miners are very similar to the background in underground coal mine videos, it is difficult to detect. In this paper, we proposed a method to detect miners ... Keywords: moving detection, miner detection, underground coal mine video

Limei Cai; Jiansheng Qian

2009-12-01T23:59:59.000Z

277

Optoelectronics Industry Development Association  

Science Conference Proceedings (OSTI)

... those systems that meet final demand are information ... One survey found that 45 percent of respondents ... there was a tremendous response from the ...

2010-10-05T23:59:59.000Z

278

PIA - Industry Interactive Procurement System (IIPS) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industry Interactive Procurement System (IIPS) PIA - Industry Interactive Procurement System (IIPS) PIA - Industry Interactive Procurement System (IIPS) PIA - Industry Interactive...

279

Mining and Minerals Policy Act of 1970 | Open Energy Information  

Open Energy Info (EERE)

and Minerals Policy Act of 1970 and Minerals Policy Act of 1970 Jump to: navigation, search Statute Name Mining and Minerals Policy Act of 1970 Year 1970 Url Actof1970.jpg Description An amendment to the Mineral Leasing Act References Mining and Minerals Policy Act of 1970[1] The Mining and Minerals Policy Act of 1970 (30 U.S.C. § 21 et seq.) - An amendment to the Mineral Leasing Act, this statute encompasses both hard rock mining and oil and gas and established modern federal policy regarding mineral resources in the United States. The Act articulates a national interest to foster and encourage private enterprise while mitigating adverse environmental impacts. References ↑ "Mining and Minerals Policy Act of 1970" Retrieved from "http://en.openei.org/w/index.php?title=Mining_and_Minerals_Policy_Act_of_1970&oldid=334610"

280

Environmental Survey preliminary report  

SciTech Connect

This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

Not Available

1988-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

PRELIMINARY SURVEY O F INTERNATIONAL M INERALS AND CHEMICAL CORPORATION  

Office of Legacy Management (LM)

Pk.. = "p' Pk.. = "p' . PRELIMINARY SURVEY O F INTERNATIONAL M INERALS AND CHEMICAL CORPORATION M u lberry, F lorida I Work performed by the Health and Safety Research Division Oak Ridge National Laboratory Oak Ridge, Tennessee 37830 March 1980 OAK.RIDGE NATIONAL LABORATORY operated by UNION CARBIDE CORPORATION for the DEPARTMENT O F ENERGY as part of the Formerly Utilized Sites-- Remedial Action Program .-. _ ._-. .__._ ..-...- -. .,. _... I_-.-.- INTERNATIONAL MINERALS AND CHEMICAL CORPORATION Mulberry, Florida At the request of the Department of Energy (DOE, then ERDA), a preliminary survey was performed at the International Minerals and Chemical Corporation in Mulberry, Florida (see Fig. 1), on April 6, 1977, to assess the radiological status of the facilities utilized under

282

MINERAL RESOURCES Mineral Resources is divided into two subsections: general and  

E-Print Network (OSTI)

: subsidies and tax incentives; regulations; research programs; and mining laws. The energy minerals; geothermal energy; coal; and other miscellaneous energy technology. General Folder 363. Mineral Resources-1965. Statement of Assistant Secretary of Interior C. Girard Davidson before the House Subcommittee on Mines

US Army Corps of Engineers

283

South Dakota timber industry: An assessment of timber product output and use, 1993. Forest Service resource bulletin  

SciTech Connect

Reports findings of a survey of all primary wood-using mills in South Dakota in 1993 and compares those findings with earlier surveys. Reports production and receipts of industrial roundwood by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by South Dakota`s primary wood-using industry.

Hackett, R.L.; Sowers, R.A.

1996-10-04T23:59:59.000Z

284

Infrared Surveys for AGN  

E-Print Network (OSTI)

From the earliest extragalactic infrared studies AGN have shown themselves to be strong infrared sources and IR surveys have revealed new populations of AGN. I briefly review current motivations for AGN surveys in the infrared and results from previous IR surveys. The Luminous Infrared Galaxies, which in some cases house dust-enshrouded AGN, submillimeter surveys, and recent studies of the cosmic x-ray and infrared backgrounds suggest that there is a population of highly-obscured AGN at high redshift. ISO Surveys have begun to resolve the infrared background and may have detected this obscured AGN population. New infrared surveys, particularly the SIRTF Wide-area Infrared Extragalactic Legacy Survey (SWIRE), will detect this population and provide a platform for understanding the evolution of AGN, Starbursts and passively evolving galaxies in the context of large-scale structure and environment.

Smith, H E

2002-01-01T23:59:59.000Z

285

Infrared Surveys for AGN  

E-Print Network (OSTI)

From the earliest extragalactic infrared studies AGN have shown themselves to be strong infrared sources and IR surveys have revealed new populations of AGN. I briefly review current motivations for AGN surveys in the infrared and results from previous IR surveys. The Luminous Infrared Galaxies, which in some cases house dust-enshrouded AGN, submillimeter surveys, and recent studies of the cosmic x-ray and infrared backgrounds suggest that there is a population of highly-obscured AGN at high redshift. ISO Surveys have begun to resolve the infrared background and may have detected this obscured AGN population. New infrared surveys, particularly the SIRTF Wide-area Infrared Extragalactic Legacy Survey (SWIRE), will detect this population and provide a platform for understanding the evolution of AGN, Starbursts and passively evolving galaxies in the context of large-scale structure and environment.

Harding E. Smith

2002-03-06T23:59:59.000Z

286

Survey of Emerging Nondestructive Evaluation Technologies  

Science Conference Proceedings (OSTI)

Four emerging nondestructive evaluation (NDE) technologies were surveyed in this report for potential applications in the electric power industry. Some of them are new, and others have experienced renewed interest based on recent technical improvements. These four NDE technologies are phased array curvature correction, guided wave focusing and imaging, laser shearography, and acoustic camera. For each of these technologies, this report provides background information, challenges, technical solutions, pot...

2012-03-30T23:59:59.000Z

287

Industrial | OpenEI  

Open Energy Info (EERE)

Industrial Industrial Dataset Summary Description The Industrial Assessment Centers (IAC) Database is a collection of all the publicly available data from energy efficiency assessments conducted by IACs at small and medium-sized industrial facilities. Source Department of Energy Industrial Assessment Centers Date Released September 20th, 2012 (2 years ago) Date Updated September 20th, 2012 (2 years ago) Keywords assessment energy efficiency Industrial manufacturing small and medium-sized Data application/vnd.ms-excel icon copy_of_iac_database.xls (xls, 28.7 MiB) Quality Metrics Level of Review Standards Comment Temporal and Spatial Coverage Frequency Daily Time Period License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset

288

2010 Georgia Manufacturing Survey  

Science Conference Proceedings (OSTI)

... Linked to Innovation Manufacturing Wages by Percentages of Respondents ... Manufacturing Strategies by Industry Group (Percentage of firms ...

2013-07-31T23:59:59.000Z

289

Nuclear dual-purpose plants for industrial energy  

SciTech Connect

One of the major obstacles to extensive application of nuclear power to industrial heat is the difference between the relatively small energy requirements of individual industrial plants and the large thermal capacity of current power reactors. A practical way of overcoming this obstacle would be to operate a centrally located dual-purpose power plant that would furnish process steam to a cluster of industrial plants, in addition to generating electrical power. The present study indicates that even relatively remote industrial plants could be served by the power plant, since it might be possible to convey steam economically as much as ten miles or more. A survey of five major industries indicates a major potential market for industrial steam from large nuclear power stations.

Klepper, O.H.

1976-01-01T23:59:59.000Z

290

Merging High Resolution Geophysical and Geochemical Surveys to Reduce  

Open Energy Info (EERE)

Merging High Resolution Geophysical and Geochemical Surveys to Reduce Merging High Resolution Geophysical and Geochemical Surveys to Reduce Exploration Risk at Glass Buttes, Oregon Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Merging High Resolution Geophysical and Geochemical Surveys to Reduce Exploration Risk at Glass Buttes, Oregon Project Type / Topic 1 Recovery Act: Geothermal Technologies Program Project Type / Topic 2 Validation of Innovative Exploration Technologies Project Description This program will combine detailed gravity, high resolution aeromagnetic, and LIDAR data, all of which will be combined for structural modeling, with hyperspectral data, which will identify and map specific minerals and mineral assemblages that may point to upflow zones. The collection of these surveys and analyses of the merged data and model will be used to site deeper slim holes. Slim holes will be flow tested to determine whether or not Ormat can move forward with developing this resource. An innovative combination of geophysical and geochemical tools will significantly reduce risk in exploring this area, and the results will help to evaluate the value of these tools independently and in combination when exploring for blind resources where structure, permeability, and temperature are the most pressing questions. The slim holes will allow testing of models and validation of methods, and the surveys within the wellbores will be used to revise the models and site production wells if their drilling is warranted.

291

Industrial Energy Efficiency Assessments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Energy Efficiency Assessments Lynn Price Staff Scientist China Energy Group Energy Analysis Department Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Industrial Energy Efficiency Assessments - Definition and overview of key components - International experience - Chinese situation and recommendations - US-China collaboration Industrial Energy Efficiency Assessments - Analysis of the use of energy and potential for energy efficiency in an industrial facility * Current situation * Recommendations for improving energy efficiency * Cost-benefit analysis of recommended options * An action plan for realizing potential savings Types of Industrial Energy Efficiency Assessments - Preliminary or walk-through - Detailed or diagnostic Audit criteria

292

Industrial Partnerships Office  

Industrial Partnerships Office 6/13 Richard Rankin Director----Roger Werne Deputy Director-----Yvonne King Administrator Nina Potter Manager Intellectual Property

293

Industrial Waste Generation  

NLE Websites -- All DOE Office Websites (Extended Search)

9) Page 2 of 7 Industrial Waste Generation Work with Engineered Nanomaterials Power Consumption Historical Contamination (groundwater, soil) Hazardous Waste Generation Atmospheric...

294

Search - Industrial Partnerships Office  

Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988 Operated by Lawrence Livermore ...

295

Construction Industry Software  

Science Conference Proceedings (OSTI)

... Translates a CIS/2 (CIMsteel Integration Standards) file into a 3D interactive VRML model of a steel structure or an IFC (Industry Foundation Classes ...

2012-04-23T23:59:59.000Z

296

Technologies - Industrial Partnerships Office  

Energy, Utilities, & Power Systems. Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988

297

OpenEI - Industrial  

Open Energy Info (EERE)

renewable energy consumption (in quadrillion btu) for electricity generation in the United States by energy use sector (commercial, industrial and electric power) and by...

298

CO2 Mineral Sequestration Studies in US  

NLE Websites -- All DOE Office Websites (Extended Search)

Mineral Sequestration Studies in US Mineral Sequestration Studies in US Philip Goldberg 1 , Zhong-Ying Chen 2 , William O'Connor 3 , Richard Walters 3 , and Hans Ziock 4 1 National Energy Technology Laboratory, P.O. Box 10940, Pittsburgh, PA 15236, goldberg@netl.doe.gov, (412)386-5806 2 Science Applications International Corporation, 1710 Goodridge Dr. McLean, VA, zhong- ying.chen@saic.com, (703)676-7328 3 Albany Research Center, Albany, OR oconner@arc.doe.gov, walters@alrc.doe, (541)967-5834 4 Los Alamos National Laboratory, Los Alamos, NM, ksl@lanl.gov, ziock@lanl.gov, (505)667- 7265 Abstract Carbon sequestration by reacting naturally occurring Mg and Ca containing minerals with CO 2 to form carbonates has many unique advantages. Most notably is the fact that carbonates have a lower energy state than CO

299

ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry: Chapter 3: Potash, Soda Ash, and Borates  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Potash, Potash, Soda Ash, and Borates 3 Potash, soda ash and borates are industrial minerals. They are used primary as feedstock for other industries. They are used to make fertilizers, glass, chemicals and other materials used throughout manufacturing industries. For example, the agricultural industry relies heavily on potash and borates as fertilizers. It is the dependence of these manufacturing industries that make industrial minerals so important. Forms of Potash Potash is used primarily as an agricultural fertilizer because it is a source for soluble potassium. Potash denotes a variety of mined and manufactured salts, all containing the element potassium in water-soluble form. Potash can be potassium chloride [KCL, or muriate of potash (MOP)], potassium sulfate [K

300

Recent developments: Industry briefs  

SciTech Connect

This article is the `Industry Briefs` portion of the March 1992 `Recent Developments` section of Nuexco. Specific issues mentioned are: (1) closure of Yankee Rowe, (2) steam-generator tube plugging at Trojan, (3) laser enrichment in South Africa, (4) the US uranium industry, (5) planning for two nuclear units in Taiwan, and (6) the establishment of a Czech/French joint venture.

NONE

1992-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Geothermal industry assessment  

DOE Green Energy (OSTI)

An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

Not Available

1980-07-01T23:59:59.000Z

302

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry and Neutron Science Industry and Neutron Science Industry and Neutron Science: Working To Make a Match "In fundamental research, we want to know everything. Industry wants to know enough to answer a question." Research Contact: Mike Crawford September 2011, Written by Deborah Counce Mike Crawford and Souleymane Diallo Mike Crawford of Dupont (right) and Souleymane Diallo, instrument scientist for the Backscattering Spectrometer at SNS, prepare a material sample for an experiment on the instrument. Industrial users are starting to eye the potential of neutron science for solving problems that can't be solved in any other way. At the same time, the SNS and HFIR neutron science facilities at ORNL are exploring ways to woo such users and to make a match of it, to the benefit of both.

303

Uranium industry annual 1996  

SciTech Connect

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

NONE

1997-04-01T23:59:59.000Z

304

Case Study of the California Cement Industry  

SciTech Connect

California is the largest cement producing state in theU.S., accounting for between 10 percent and 15 percent of U.S. cementproduction and cement industry employment. The cement industry inCalifornia consists of 31 sites that consume large amounts of energy,annually: 1,600 GWh of electricity, 22 million therms of natural gas, 2.3million tons of coal, 0.25 tons of coke, and smaller amounts of wastematerials, including tires. The case study summarized in this paperfocused on providing background information, an assessment ofenergy-efficiency opportunities and barriers, and program recommendationsthat can be used by program planners to better target products to thecement industry. The primary approach to this case study involvedwalk-through surveys of customer facilities and in depth interviews withcustomer decision makers and subsequent analysis of collected data. Inaddition, a basic review of the cement production process was developed,and summary cement industry energy and economic data were collected, andanalyzed. The analysis of secondary data provides background informationon the cement industry and identification of potential energy-efficiencyopportunities. The interviews provide some understanding of the customerperspective about implementation of energy-efficiencyprojects.

Coito, Fred; Powell, Frank; Worrell, Ernst; Price, Lynn; Friedmann, Rafael

2005-05-01T23:59:59.000Z

305

Manufacturing Energy Consumption Survey (MECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

2 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive 2 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive Data Methodology & Forms all tables + EXPAND ALL Consumption of Energy for All Purposes (First Use) Values RSE Table 1.1 By Mfg. Industry & Region (physical units) XLS PDF XLS Table 1.2 By Mfg. Industry & Region (trillion Btu) XLS PDF XLS Table 1.3 By Value of Shipments & Employment Size Category & Region XLS PDF Table 1.4 Number of Establishments Using Energy Consumed for All Purpose XLSPDF Table 1.5 By Further Classification of "Other" Energy Sources XLS PDF Energy Used as a Nonfuel (Feedstock) Values RSE Table 2.1 By Mfg. Industry & Region (physical units) XLS PDF XLS Table 2.2 By Mfg. Industry & Region (trillion Btu) XLS PDF XLS Table 2.3 By Value of Shipments & Employment Size Category XLS PDF

306

Berkeley Lab Postdoc Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Founded in 1983, MOR Associates has led dozens of major survey efforts on behalf of higher education, such as UC Berkeley, MIT, Stanford University, University of Washington,...

307

ORISE: Characterization surveys  

NLE Websites -- All DOE Office Websites (Extended Search)

extent of radiological contamination at sites scheduled for decontamination and decommissioning (D&D). A fundamental aspect of all D&D projects, characterization surveys provide...

308

The Dark Energy Survey  

Science Conference Proceedings (OSTI)

A new proposed optical?near infrared survey of 5000 square degrees of the South Galactic Cap is presented. To perform it

E. Sánchez; Dark Energy Survey Collaboration

2006-01-01T23:59:59.000Z

309

Property:MineralManager | Open Energy Information  

Open Energy Info (EERE)

MineralManager MineralManager Jump to: navigation, search Property Name MineralManager Property Type Page Pages using the property "MineralManager" Showing 25 pages using this property. (previous 25) (next 25) B BLM-NV-WN-ES-08-01-1310, NV-020-08-01 + BLM + C CA-017-05-051 + BLM + CA-170-02-15 + BLM + CA-650-2005-086 + BLM + CA-670-2010-107 + BLM + CA-670-2010-CX + BLM + D DOE-EA-1733 + California + DOE-EA-1759 + Naknek Electric Association + DOE-EA-1849 + BLM + DOE-EIS-0298 + BLM + DOI-BLM-CA-C050-2009-0005-EA + BLM + DOI-BLM-CA-EA-2002-??? + BLM + DOI-BLM-CA-ES-2013-002+1793-EIS + BLM +, BLM + DOI-BLM-ID-220-2009-EA-3709 + BLM + DOI-BLM-ID-B010-2010-0083-CX + BLM + DOI-BLM-ID-I020-2012-0017-CX + BLM + DOI-BLM-ID-T020-2012-0003-CX + BLM + DOI-BLM-NM-L000-2012-0020-DNA + BLM +

310

NEXRAD and the Broadcast Weather Industry: Preparing to Share the Technology  

Science Conference Proceedings (OSTI)

This paper describes results from a survey designed to establish the current level of radar and computer technology of the television weather industry, and to assess the awareness and attitudes of television weather forecasters toward the Next ...

Michele M. Robertson; Kelvin K. Droegemeier

1990-01-01T23:59:59.000Z

311

NSLS Industrial User Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Jun Wang Physicist, Industrial Program Coordinator Phone: 344-2661 Email: junwang@bnl.gov Jun Wang is an Industrial Program Coordinator in the Photon Science Directorate at Brookhaven National Laboratory. She is working closely with industrial researchers as well as beamline staff to identify and explore new opportunities in industrial applications using synchrotron radiation. She has been leading the industrial research program including consultation, collaboration and outreach to the industrial user groups. Before joining BNL in 2008, Jun Wang was a Lead Scientist for a high-resolution high throughput powder diffraction program at the Advanced Photon Source (APS). As a Physicist at BNL, her research focuses on materials structure determination and evolution. Her expertise covers wide range x-ray techniques such as thin film x-ray diffraction and reflectivity, powder diffraction, small angle x-ray scattering, protein solution scattering and protein crystallography, as well as x-ray imaging. Currently she is the project leader of a multi-million dollar project on transmission x-ray microscopy recently funded by the U.S. DOE and the spokesperson for this new imaging beamline at the NSLS. She has also been collaborating with universities and industries for several projects on energy research at the NSLS.

312

Effects of physical and geochemical heterogeneities on mineral transformation and biomass accumulation during uranium bioremediation at Rifle, Colorado  

E-Print Network (OSTI)

2009. Mineral transformation and biomass accumulation duringof mineral precipitates and biomass during bioremediation aton mineral transformation and biomass accumulation during

Li, Li

2010-01-01T23:59:59.000Z

313

Industrial process surveillance system  

DOE Patents (OSTI)

A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W. (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

1998-01-01T23:59:59.000Z

314

Industrial Process Surveillance System  

DOE Patents (OSTI)

A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

2001-01-30T23:59:59.000Z

315

Industrial process surveillance system  

DOE Patents (OSTI)

A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

1998-06-09T23:59:59.000Z

316

REMOTE SENSING GEOLOGICAL SURVEY  

E-Print Network (OSTI)

REMOTE SENSING IN GEOLOGICAL SURVEY OF BRAZIL August/2010 Mônica Mazzini Perrotta Remote Sensing Division Head #12;SUMMARY The Geological Survey of Brazil mission The Remote Sensing Division Main remote, Paleontology, Remote Sensing Director of Hydrology and Land Management But Remote Sensing Division gives

317

Utility Baghouse Survey 2009  

Science Conference Proceedings (OSTI)

EPRI conducted comprehensive surveys of utility baghouse installations in 1981, 1991, and 2005 to summarize the state of the technology. The current survey focuses on nine selected pulse-jet baghouses to provide a better understanding of the design, performance, and operation of recent installations.

2009-12-14T23:59:59.000Z

318

NASA Customer Satisfaction Survey  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Satisfaction Survey Customer Satisfaction Survey NASA's Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC) would like to encourage you to participate in the NASA ESDIS 2013 American Customer Satisfaction Survey. The ORNL DAAC is one of twelve data centers sponsored by NASA's Earth Science Data and Information System (ESDIS) project. The ESDIS project uses the results of this survey to evaluate our success and to determine where improvements are needed. Invitations will be sent to you, our users, from CFI Group [CFI Group on behalf of NASA (NASA@jangomail.com)] during the week of August 20, 2013. Each invitation will reference us as "ORNL DAAC / FLUXNET", and contain a unique secure link to this Web-based anonymous survey. We encourage you to participate!

319

Building Technologies Residential Survey  

SciTech Connect

Introduction A telephone survey of 1,025 residential occupants was administered in late October for the Building Technologies Program (BT) to gather information on residential occupant attitudes, behaviors, knowledge, and perceptions. The next section, Survey Results, provides an overview of the responses, with major implications and caveats. Additional information is provided in three appendices as follows: - Appendix A -- Summary Response: Provides summary tabular data for the 13 questions that, with subparts, comprise a total of 25 questions. - Appendix B -- Benchmark Data: Provides a benchmark by six categories to the 2001 Residential Energy Consumption Survey administered by EIA. These were ownership, heating fuel, geographic location, race, household size and income. - Appendix C -- Background on Survey Method: Provides the reader with an understanding of the survey process and interpretation of the results.

Secrest, Thomas J.

2005-11-07T23:59:59.000Z

320

CSEM WP 112 Consumer Choice and Industrial Policy  

E-Print Network (OSTI)

residential natural gas market and examine responses to a specially commissioned survey of nearly seven the UK domestic natural gas market1 As such, it provides a useful example of the developmentCSEM WP 112 Consumer Choice and Industrial Policy: A Study of UK Energy Markets Monica Giulietti

California at Berkeley. University of

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Working Through Outsourcing: Software Practice, Industry Organization and Industry Evolution in India  

E-Print Network (OSTI)

Outsourcing: Software Practice, Industry Organizationand Industry Evolution in India Kyle EischenSoftware Practice, Industry Organization and Industry

Eischen, Kyle

2004-01-01T23:59:59.000Z

322

North Shore Gas - Commercial and Industrial Prescriptive Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

North Shore Gas - Commercial and Industrial Prescriptive Rebate North Shore Gas - Commercial and Industrial Prescriptive Rebate Program North Shore Gas - Commercial and Industrial Prescriptive Rebate Program < Back Eligibility Commercial Savings Category Heating & Cooling Commercial Heating & Cooling Heating Other Commercial Weatherization Manufacturing Appliances & Electronics Water Heating Maximum Rebate Contact North Shore Gas Program Info Expiration Date 05/31/2013 State Illinois Program Type Utility Rebate Program Rebate Amount Steam Traps (Low Pressure): $60/unit Steam Traps (High Pressure): $150/unit Industrial/Process Steam Trap (Low Pressure): $150 Industrial/Process Steam Trap (High Pressure): $200 HVAC Steam Trap Test: $5/unit surveyed Condensing Unit Heater: $2/MBH Boilers: $2 - $6.67/MBH Boiler Cutout/Reset Control: $250

323

Industry | OpenEI  

Open Energy Info (EERE)

Industry Industry Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by other industries and construction. Data is only available for Paraguay and the U.S., years 2000 to 2007. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption Industry UN Data application/zip icon XML (zip, 514 bytes) application/zip icon XLS (zip, 425 bytes) Quality Metrics

324

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Former User Group Chair Enthusiastic About Relevance of Neutron Scattering Former User Group Chair Enthusiastic About Relevance of Neutron Scattering to Industrial Research Former User Group Chair Mike Crawford Mike Crawford, DuPont Research and Development. The drive is intensifying to encourage research partnerships between Neutron Sciences and private industry. Such partnerships, a long-term strategic goal set by the DOE's Basic Energy Sciences Advisory Committee, will deliver industry and its technological problems to SNS and HFIR, where joint laboratory-industry teams can use the unparalleled resources available here to resolve them. "SNS is a tremendous facility. It has the potential to have a couple of thousand user visits a year and, if they build another target station in the future, you're probably talking about 4000 user visits a year,"

325

Argonne CNM: Industrial Users  

NLE Websites -- All DOE Office Websites (Extended Search)

For Industrial Users For Industrial Users The Center for Nanoscale Materials (CNM) has specific interest in growing the industrial user program and encourages researchers in industry to consider the capabilities and expertise we have to offer. As a CNM user, you have easy access to sophisticated scientific instrumentation geared toward nanoscience and nanotechnology. Moreover, our widely recognized staff researchers offer support in designing your experiments, using the equipment, and analyzing your data. Access to the CNM is through peer review of user proposals. Before you submit your first user proposal, we encourage you to contact any of our staff researchers, group leaders, the User Office, or division management to discuss the feasibility of your intended research using the expertise and facilities at the CNM. We are here to serve you as part of our user community and will be happy to address any questions you might have.

326

Electric Utility Industry Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric Utility Industry Update Electric Utility Industry Update Steve Kiesner Director, National Customer Markets Edison Electric Institute FUPWG Spring 2012 April 12, 2012 Edison Electric Institute ï‚› Investor-Owned Electric Companies ï‚› Membership includes ï‚› 200 US companies, ï‚› More than 65 international affiliates and ï‚› 170 associates ï‚› US members ï‚› Serve more than 95% of the ultimate customers in the investor-owned segment of the industry and ï‚› Nearly 70% of all electric utility ultimate customers, and ï‚› Our mission focuses on advocating public policy; expanding market opportunities; and providing strategic business information Agenda ï‚›Significant Industry Trends ï‚›Utility Infrastructure Investments ï‚›Generation and Fuel Landscape

327

Technologies - Industrial Partnerships Office  

Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988 Operated by Lawrence Livermore National Security, LLC ...

328

Industrial Oil Products Division  

Science Conference Proceedings (OSTI)

A forum for professionals involved in research, development, engineering, marketing, and testing of industrial products and co-products from fats and oils, including fuels, lubricants, coatings, polymers, paints, inks, cosmetics, dielectric fluids, and ad

329

Industrial Demand Module  

Reports and Publications (EIA)

Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

Kelly Perl

2013-05-14T23:59:59.000Z

330

Optimization of Industrial Enzymes  

Enzymes are highly efficient naturally occurring catalysts that are used in a wide range of applications from industrial processes to new drug development. Conventional mechanism for understanding the mechanisms of enzyme functions are costly and time ...

331

Industrial Demand Module  

Reports and Publications (EIA)

Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

Kelly Perl

2013-09-30T23:59:59.000Z

332

Industry - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Hidden Stresses in Materials HTML, HFIR Team Work with Industry To Find Hidden Stresses in Materials Metalsa, EPRI, John Deere among partners in high-impact projects Whether it's...

333

Electric Power Industry Restructuring:  

U.S. Energy Information Administration (EIA)

Good morning. I was asked to speak to you today about EIA’s data collection efforts in a more competitive electric power industry. I know that you want to hear ...

334

Uranium Industry Annual, 1992  

Science Conference Proceedings (OSTI)

The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

Not Available

1993-10-28T23:59:59.000Z

335

Industrial Assessment Center  

SciTech Connect

The University of Dayton (UD) performed energy assessments, trained students and supported USDOE objectives. In particular, the UD Industrial Assessment Center (IAC) performed 96 industrial energy assessment days for mid-sized manufacturers. The average identified and implemented savings on each assessment were $261,080 per year and $54,790 per year. The assessments served as direct training in industrial energy efficiency for 16 UD IAC students. The assessments also served as a mechanism for the UD IAC to understand manufacturing energy use and improve upon the science of manufacturing energy efficiency. Specific research results were published in 16 conference proceedings and journals, disseminated in 22 additional invited lectures, and shared with the industrial energy community through the UD IAC website.

J. Kelly Kissock; Becky Blust

2007-04-17T23:59:59.000Z

336

Calculation of fluid-mineral equilibria using the simplex algorithm  

Science Conference Proceedings (OSTI)

Keywords: CHILLER, K-feldspar, PATH, SIMCALC, SIMPLEX, equilibria, fluid-mineral, geochemistry, hydrolysis, mass transfer, paragenesis

J. R. Wood

1993-01-01T23:59:59.000Z

337

The beam business: Accelerators in industry  

SciTech Connect

Most physicists know that particle accelerators are widely used for treating cancer. But few are acquainted with the depth and breadth of their use in a myriad of applications outside of pure science and medicine. Society benefits from the use of particle beams in the areas of communications, transportation, the environment, security, health, and safety - in terms both of the global economy and quality of life. On the manufacturing level, the use of industrial accelerators has resulted in the faster and cheaper production of better parts for medical devices, automobiles, aircraft, and virtually all modern electronics. Consumers also benefit from the use of accelerators to explore for oil, gas, and minerals; sterilize food, wastewater, and medical supplies; and aid in the development of drugs and biomaterials.

Hamm, Robert W.; Hamm, Marianne E. [Pleasanton, California (United States)

2011-06-15T23:59:59.000Z

338

A guide to surveys of motor vehicle fleets  

DOE Green Energy (OSTI)

In response to directives in Section 407 of the Energy Policy Act of 1992 (EPACT), the Energy Information Administration (EIA) developed a data collection program designed to provide information useful to persons interested in the alternative fuels market. The target audience includes those seeking to manufacture, convert, sell, own, or operate alternative-fuel vehicles (AFVs) or alternative fueling facilities. Among the various projects EIA conducted as part of this data collection program were two fleet surveys conducted in Department of Energy-designated Clean Cities. The Clean Cities program is a locally-based government/industry partnership coordinated by the Department of Energy to expand the use of alternative transportation fuels. These surveys were designed to collect a broad range of information regarding the fleets and fleet vehicles in operation in the Atlanta, Georgia and Denver, Colorado areas. One of the objectives of these surveys was to attempt to identify and describe the market for AFVs. Due to inherent limitations associated with AFVs and limited alternative-fuel infrastructure, it`s believed that the first practical applications for AFVs will be within private and government fleets. Another objective in conducting the Clean Cities Fleet surveys was to develop a useful methodology for accessing and surveying private and municipal fleets that would aid other interested parties in conducting similar surveys. This report is intended to provide a description of how EIA gathered information on private and municipal fleets, but the basic survey design could be used to design surveys of other difficult-to-access populations. There are 3 basic steps to any survey: define the target population, constructing the survey frame, and implementing the survey. The procedures outlined in this report are, for the most part, the procedures used for the fleet survey conducted in Denver. The major changes between the two surveys are described in Appendix A.

NONE

1996-11-01T23:59:59.000Z

339

Innovative Utility Pricing for Industry  

E-Print Network (OSTI)

The electric utility industry represents only one source of power available to industry. Although the monopolistic structure of the electric utility industry may convey a perception that an electric utility is unaffected by competition, this is an erroneous perception with regard to industry. Electric utilities face increased competition, both from other utilities and from industrial self-generation. The paper discusses competition for industrial customers and innovative pricing trends that have evolved nationally to meet the growing competition for industrial sales. Cogeneration activities and the emerging concepts of wheeling power are also discussed. Specifics of industry evaluation and reaction to utility pricing are presented. Also enumerated are examples of the response various utilities throughout the United States have made to the needs of their industrial customers through innovative rate design. Industry/utility cooperation can result in benefits to industry, to the electric utility and to all other ratepayers. This discussion includes examples of successful cooperation between industry and utilities.

Ross, J. A.

1986-06-01T23:59:59.000Z

340

Mineral Oil Transport and Fate Investigation at Franklin Station  

Science Conference Proceedings (OSTI)

This report presents results of an investigation to evaluate the fate and transport of mineral oil in the subsurface of a substation. Understanding subsurface migration of mineral oil will help utilities who are involved in cleanup of past mineral oil spills and leaks.

1998-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

West Virginia University College of Engineering and Mineral Resources  

E-Print Network (OSTI)

of designing and managing a modern coal or mineral mining operation, or continuing into research, banking, law or consulting. Fields of Study Surface Mining - Extracting minerals and coal from the earth's surface safely of extracting minerals from the earth. Materials Handling - Efficiently and safely moving people, equipment

Mohaghegh, Shahab

342

Mineral resources of the North Algodones Dunes Wilderness Study Area (CDCA-360), Imperial County, California  

DOE Green Energy (OSTI)

This report presents the results of a mineral survey of the North Algodones Dunes Wilderness Study Area (CDCA-360), California Desert Conservation Area, Imperial County, California. The potential for undiscovered base and precious metals, and sand and gravel within the North Algodones Dunes Wilderness Study Area is low. The study area has a moderate potential for geothermal energy. One small sand-free area between the Coachella Canal and the west edge of the dune field would probably be the only feasible exploration site for geothermal energy. The study area has a moderate to high potential for the occurrence of undiscovered gas/condensate within the underlying rocks. 21 refs.

Smith, R.S.U.; Yeend, W.; Dohrenwend, J.C.; Gese, D.D.

1984-01-01T23:59:59.000Z

343

China Brief, Volume 7, Issue 1 SAFETY CHALLENGES IN CHINA'S COAL MINING INDUSTRY  

E-Print Network (OSTI)

China Brief, Volume 7, Issue 1 1/4 SAFETY CHALLENGES IN CHINA'S COAL MINING INDUSTRY By Jianjun Tu Coal extraction, by no means a safe endeavor, has had a particularly disastrous record in China. According to official statistics, more than 250,000 Chinese coal miners have died in mining accidents since

344

Does the CO2 emission trading directive threaten the competitiveness of European industry?  

E-Print Network (OSTI)

, gas and water; non-metallic minerals; iron and steel; petroleum refining, coke and nuclear fuel industry refining, coke and nuclear fuels chemicals machinery and equipement, N.E.C. textile, textile sector, the loss in turnover is then the higher, the higher the four items below: 1. the cost of CO2

Paris-Sud XI, Université de

345

Advanced technology options for industrial heating equipment research  

Science Conference Proceedings (OSTI)

This document presents a strategy for a comprehensive program plan that is applicable to the Combustion Equipment Program of the DOE Office of Industrial Technologies (the program). The program seeks to develop improved heating equipment and advanced control techniques which, by improvements in combustion and beat transfer, will increase energy-use efficiency and productivity in industrial processes and allow the preferred use of abundant, low grade and waste domestic fuels. While the plan development strategy endeavors to be consistent with the programmatic goals and policies of the office, it is primarily governed by the needs and concerns of the US heating equipment industry. The program, by nature, focuses on energy intensive industrial processes. According to the DOE Manufacturing Energy Consumption Survey (MECS), the industrial sector in the US consumed about 21 quads of energy in 1988 in the form of coal, petroleum, natural gas and electricity. This energy was used as fuels for industrial boilers and furnaces, for agricultural uses, for construction, as feedstocks for chemicals and plastics, and for steel, mining, motors, engines and other industrial use over 75 percent of this energy was consumed to provide heat and power for manufacturing industries. The largest consumers of fuel energy were the primary metals, chemical and allied products, paper and allied products, and stone, clay and glass industry groups which accounted for about 60% of the total fuel energy consumed by the US manufacturing sector.

Jain, R.C.

1992-10-01T23:59:59.000Z

346

Solids transportation model of an industrial rotary dryer  

SciTech Connect

A complete simulation model has been developed for an industrial rotary dryer to account for the heat and mass exchange between the solids and the gas. This simulator is mainly composed of three models: solids transportation model, furnace model, and gas model. The solids transportation model is the modified Cholette-Cloutier model. It consists of a series of interactive reservoirs which are subdivided into an active and dead compartments to account for the characteristic extended tail of the residence time distribution (RTD) curves observed in industrial dryers. To expand the validity of the model, experiments have been performed in an industrial rotary dryer to obtain RTD curves under different mineral concentrate and gas flow rates. This paper describes these experiments and presents the variation of the average residence time and model parameters as function of solids and gas flow rates.

Renaud, M.; Thibault, J.; Trusiak, A.

2000-05-01T23:59:59.000Z

347

Electrical Resistivity and Self-Potential Surveys Blue Mountain Geothermal  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Electrical Resistivity and Self-Potential Surveys Blue Mountain Geothermal Area, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Electrical Resistivity and Self-Potential Surveys Blue Mountain Geothermal Area, Nevada Abstract Self potential and electrical resistivity surveys have been completed at the Blue Mountain geothermal area to search for the source of thermal fluids discovered during drilling for mineral exploration, and to help characterize the geothermal resource. Two large SP anomalies are associated with the artesian thermal area and the area of highest temperature observed in drill holes. Two similar anomalies were mapped 1 to 3 km to the south

348

Preliminary Results from Two Spectral-Geobotanical Surveys over Geothermal  

Open Energy Info (EERE)

Preliminary Results from Two Spectral-Geobotanical Surveys over Geothermal Preliminary Results from Two Spectral-Geobotanical Surveys over Geothermal Areas- Cove Fort-Sulphurdale, Utah and Dixie Valley, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Preliminary Results from Two Spectral-Geobotanical Surveys over Geothermal Areas- Cove Fort-Sulphurdale, Utah and Dixie Valley, Nevada Abstract Geobotanical anomalies have been associated with mineralization and hydrocarbon microseepage. As both of these phenomena have been associated with hydrothermal convection systems in the Great Basin it is likely that geobotanical anomalies are present over geothermal areas. This paper present preliminary results for the ongoing Cove Fort Sulphurdale, Utah and Dixie Valley, Utah, studies. Data acquisition for these areas has included

349

Baseline study of US industry solar exports  

DOE Green Energy (OSTI)

This study is a detailed aggregate profile of US solar export activity in 1979 based on a survey of all segments of the solar industry. It identifies the dollar volume of exports by technology: (1) solar heating and cooling products; (2) wind products; (3) photovoltaics; (4) solar thermal electric; (5) OTEC and biomass; and (6) support products and services. The study offers to government and industry groups, for the first time, comprehensive information with which to formulate export goals and assistance measures based on the current realities of the solar export marketplace. Specific and aggregate recommendations which can lead to identification of realistic solar export opportunities and development of solar export markets are included.

Jacobius, T M; Levi, R S; Bereny, J A

1980-10-01T23:59:59.000Z

350

Tutorial Luncheon: The Role of Minerals in Papermaking and Paper ...  

Science Conference Proceedings (OSTI)

There he has worked on surfactant development for paper industry, oil industry, industrial cleaning, and household cleaning applications. Dr. Borchardt is the ...

351

Materials Reliability Program: Inspection Data Survey Report (MRP-219, revision 8)  

Science Conference Proceedings (OSTI)

This document provides summaries and details of inspection data collected from U.S. Pressurized Water Reactors (PWRs) in response to a biannual survey conducted by the Electric Power Research Institute’s (EPRI’s) Materials Reliability Program (MRP). This revision includes results through fall 2011. The results of the MRP surveys have informed industry practices and prompted mitigative actions, the results of which are already reflected in the current industry ...

2012-12-23T23:59:59.000Z

352

California Industrial Energy Efficiency Potential  

E-Print Network (OSTI)

The Potential for Energy Efficiency. Prepared for The EnergyIndustrial Sector Energy Efficiency Potential Study - DraftIndustrial Energy Efficiency Market Characterization Study.

Coito, Fred; Worrell, Ernst; Price, Lynn; Masanet, Eric; Rafael Friedmann; Rufo, Mike

2005-01-01T23:59:59.000Z

353

Industrial Technologies - Energy Innovation Portal  

Industrial Technologies Marketing Summaries Here you’ll find marketing summaries of industrial technologies available for licensing from U.S. Department of Energy ...

354

EIA Electric Industry Data Collection  

U.S. Energy Information Administration (EIA)

Steam Production EIA Electric Industry Data Collection Residential Industrial ... Monthly data on cost and quality of fuels delivered to cost-of-service plants

355

NEMS industrial module documentation report  

SciTech Connect

The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2010) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of output of industrial activity. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

1994-01-01T23:59:59.000Z

356

Sustainable Development Indicators 353 In the Mineral Industries, Milos 2003, Greece  

E-Print Network (OSTI)

of the exposed orebody, the overburden material, the reclaimed area, the landscape, etc. - 3D representations presents the pit reclaimed as a lake for scenario I. It can easily be deduced that VR representations York. Figure 8: Virtual realty representation of quarry pit reclaimed as a lake. #12;

357

Stream sediment geochemical surveys for uranium  

SciTech Connect

Stream sediment is more universally available than ground and surface waters and comprises the bulk of NURE samples. Orientation studies conducted by the Savannah River Laboratory indicate that several mesh sizes can offer nearly equivalent information. Sediment is normally sieved in the field to pass a 420-micrometer screen (US Std. 40 mesh) and that portion of the dried sediment passing a 149-micrometer screen (US Std. 100 mesh) is recovered for analysis. Sampling densities usually vary with survey objectives and types of deposits anticipated. Principal geologic features that can be portrayed at a scale of 1:250,000, such as major tectonic units, plutons, and pegmatite districts, are readily defined using a sampling density of 1 site per 5 square miles (13 km/sup 2/). More detailed studies designed to define individual deposits require greater sampling density. Analyses for elements known to be associated with uranium in a particular mineral host may be used to estimate the relative proportion of uranium in several forms. For example, uranium may be associated with thorium and cerium in monazite, and with zirconium and hafnium in zircon. Readily leachable uranium may be adsorbed to trapped in oxide coatings on mineral particles. Soluble or mobile uranium may indicate an ore source, whereas uranium in monazite or zircon is not likely to be economically attractive. Various schemes may be used to estimate for form of uranium in a sample. Simple elemental ratios are a useful first approach. Multiple ratios and subtractive formulas empirically designed to account for the presence of particular minerals are more useful. Residuals calculated from computer-derived regression equations or factor scores appear to have the greatest potential for locating uranium anomalies.

Price, V.; Ferguson, R.B.

1979-01-01T23:59:59.000Z

358

Human computation: a survey and taxonomy of a growing field  

Science Conference Proceedings (OSTI)

The rapid growth of human computation within research and industry has produced many novel ideas aimed at organizing web users to do great things. However, the growth is not adequately supported by a framework with which to understand each new system ... Keywords: crowdsourcing, data mining, human computation, literature review, social computing, survey, taxonomy

Alexander J. Quinn; Benjamin B. Bederson

2011-05-01T23:59:59.000Z

359

Energy Efficiency Fund (Electric) - Commercial and Industrial...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial and Industrial Energy Efficiency Programs Energy Efficiency Fund (Electric) - Commercial and Industrial Energy Efficiency Programs Eligibility Commercial Industrial...

360

Industrial Distributed Energy: Combined Heat & Power | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial Distributed Energy: Combined Heat & Power Industrial Distributed Energy: Combined Heat & Power Information about the Department of Energy's Industrial Technologies...

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Industrial Oil Products Newsletter April 2013  

Science Conference Proceedings (OSTI)

Read the Industrial Oil Products Newsletter April 2013. Industrial Oil Products Newsletter April 2013 Industrial Oil Products Newsletter April 2013 ...

362

Coldwater Board of Public Utilities - Commercial & Industrial...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial & Industrial Lighting Rebate Program Coldwater Board of Public Utilities - Commercial & Industrial Lighting Rebate Program Eligibility Commercial Industrial Local...

363

Generalized survey propagation  

Science Conference Proceedings (OSTI)

Survey propagation (SP) has recently been discovered as an efficient algorithm in solving classes of hard constraint-satisfaction problems (CSP). Powerful as it is, SP is still a heuristic algorithm, and further understanding its algorithmic nature, ...

Ronghui Tu / Yongyi Mao, Jiying Zhao

2011-01-01T23:59:59.000Z

364

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

n tal Specialist and the DOE NEPA Compliance Officer. NOTE: If Change of Scope oc:c:urs, Project Lead must submit a new NEPA Compliance Survey and contact the Technical...

365

Site Energy Surveys  

E-Print Network (OSTI)

Operating improvements and selected investments have already improved US refining and petrochemical energy utilization efficiency by about 20%, compared to 1972 operating efficiencies. This is equivalent to saving well over 250,000 B/D of crude; which is equal to the output of several major synthetic fuels projects! Site Energy Surveys can be an important technique for achieving the next major increment (1520%) in energy savings, even when using existing technology. These surveys encompass the total site, all associated plants, and investigate all aspects of energy requirements, heat integration configurations, steam/power cogeneration possibilities and inefficient practices. After potential energy conservation opportunities have been identified, screening is conducted to develop their economic attractiveness. This presentation reviews factors leading to the need for Site Energy Surveys, the objectives for conducting surveys, the approach utilized, considerations given to values of energy and concludes with overall improvements achieved.

Lockett, W., Jr.; Guide, J. J.

1981-01-01T23:59:59.000Z

366

Evaluating Our Instruction: Surveys  

E-Print Network (OSTI)

you put in; and as the grandest mill in the world will not extract wheat flour from peascod, so pagesEvaluating Our Instruction: Surveys Mathematics may be compared to a mill of exquisite workmanship

Maryland at College Park, University of

367

Development of an advanced gas-fired mineral-wool melter. Annual report, January-December 1988  

SciTech Connect

A gas-fired mineral-wool melter was designed to provide a melting technology option to the existing coke-fired cupola melters used by the mineral wool industry. Over the past few years, mineral-wool producers have been increasingly pressured to reduce their level of pollutant gaseous emissions. Including the fuel consumption for an afterburner required with a cupola melter, the direct production costs for fuel currently range from $32 to $44 per ton of melted product; dependent on the effectiveness of a heat-recovery system. The estimated direct fuel cost for a gas-fired mineral-wool melter could be as low as $16 per ton. The configuration of the prototype melter contributes to the energy savings because waste heat is reclaimed by preheating the feedstock in a counterflow shaft. Besides the beneficial decrease in energy costs, the proposed gas-fired melter will virtually eliminate carbon monoxide and unburned hydrocarbon emissions as well as substantially reduce emissions of hydrogen sulfide. Finally, with an improved capability to process the melted product at a controlled temperature and flow rate, the gas-fired melter should improve the overall quality of the mineral fiber product compared to the state-of-the-art coke-fired cupola melter.

Vereecke, F.J.; Thekdi, A.C.

1989-06-01T23:59:59.000Z

368

Tribology of earthmoving, mining, and minerals processing  

Science Conference Proceedings (OSTI)

Earthmoving, mining, and minerals processing each involve frequent, and often severe, mechanical interactions between metals, and between metals and abrasive nonmetallic and metallic materials (i.e., mineral bearing ores). The abrasive nature of ores causes significant wear to extracting, handling, and processing equipment. Consequently, wear in earthmoving, mining, and minerals processing operations results in the removal of large amounts of material from the wear surfaces of scraping, digging, and ore processing equipment. From an energy point of view, material wear of this nature is classified as an indirect tribological loss (Imhoff et al., 1985). Additionally, a significant amount of energy is expended to overcome frictional forces in the operation of all earthmoving, mining, and minerals processing machinery (i.e., a direct tribological loss). However, in these particular processes, wear losses are more than five times those of frictional losses. In general, the amount of material lost from a particular component in these operations, before it becomes unserviceable, is far greater than that which can be tolerated in typical metal-to-metal wear situations (e.g., lubricated bearing-shaft wear couples in machinery). Consequently, much of the equipment used in earthmoving, mining, and ore processing makes use of easily replaceable or repairable, and preferably low-cost, wear components. The mechanisms by which metal-to-metal and abrasive wear occurs, and the relationships between material properties and wear behavior, are reasonably well-understood in general terms. However, the specific wear mechanisms/wear material interactions that occur during earthmoving, digging, and the processing of ore are more complex, and depend on the wear material, and on the nature of abrasive, the type of loading, and the environment. As a result of this general knowledge, reliable predictions can be made regarding the performance of particular materials under a range of in-service operating conditions. This knowledge has allowed the rational selection of wear-resistant materials for use as earthmoving, mining, and minerals processing components, and new wear-resistant materials can be designed using our knowledge of the impact and abrasion mechanisms encountered in the day-to-day operation of components used in these operations.

Hawk, Jeffrey A.; Wilson, Rick D.

2001-01-01T23:59:59.000Z

369

Indian Mineral Development Act of 1982 | Open Energy Information  

Open Energy Info (EERE)

Mineral Development Act of 1982 Mineral Development Act of 1982 Jump to: navigation, search Statute Name Indian Mineral Development Act Year 1982 Url IndianDevelopment1982.jpg Description Provides for tribes to enter into energy development agreements with DOI approval References Indian Mineral Development Act of 1982[1] Bureau of Indian Affairs[2] The Indian Mineral Development Act of 1982 (IMDA) 25 U.S.C. Secs. 2101-2108 was enacted to provide Indian tribes with flexibilty in the development and sale of mineral resources. S.Rep. No. 97-472, 97th Cong.2d Sess. 2 (1982). Foremost among the beneficial effects of IMDA was the opportunity for Indian tribes to enter into joint venture agreements with mineral developers. The contractual relationships permitted by IMDA were designed to meet two objectives: First, to further the policy of self-determination

370

Relations Of Ammonium Minerals At Several Hydrothermal Systems In The  

Open Energy Info (EERE)

Relations Of Ammonium Minerals At Several Hydrothermal Systems In The Relations Of Ammonium Minerals At Several Hydrothermal Systems In The Western Us Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Relations Of Ammonium Minerals At Several Hydrothermal Systems In The Western Us Details Activities (5) Areas (1) Regions (0) Abstract: Ammonium bound to silicate and sulfate minerals has recently been located at several major hydrothermal systems in the western U.S. utilizing newly-discovered near-infrared spectral properties. Knowledge of the origin and mineralogic relations of ammonium minerals at known hydrothermal systems is critical for the proper interpretation of remote sensing data and for testing of possible links to mineralization. Submicroscopic analysis of ammonium minerals from two mercury- and gold-bearing

371

Advanced Research Power Program--CO2 Mineral Sequestration  

NLE Websites -- All DOE Office Websites (Extended Search)

Sequestration Sequestration Robert Romanosky National Energy Technology Laboratory Mineral Carbonation Workshop August 8, 2001 Advanced Research Power Program Descriptor - include initials, /org#/date Mineral Sequestration Research Research effort seeks to refine and validate a promising CO 2 sequestration technology option, mineral sequestration also known as mineral carbonation Descriptor - include initials, /org#/date What is Mineral Carbonation * Reaction of CO 2 with Mg or Ca containing minerals to form carbonates * Lowest energy state of carbon is a carbonate and not CO 2 * Occurs naturally in nature as weathering of rock * Already proven on large scale - Carbonate formation linked to formation of the early atmosphere Descriptor - include initials, /org#/date Advantages of Mineral Carbonation

372

Stream sediment detailed geochemical survey for Date Creek Basin, Arizona  

SciTech Connect

Results of the Date Creek Basin detailed geochemical survey are reported. Field and laboratory data are reported for 239 stream sediment samples. Statistical and areal distributions of uranium and possible uranium-related variables are displayed. A generalized geologic map of the area is provided, and pertinent geologic factors which may be of significance in evaluating the potential for uranium mineralization are briefly discussed. Based on stream sediment geochemical data, significant concentrations of uranium are restricted to the Anderson Mine area. The 84th percentile concentrations of U-FL, U-NT, and U-FL/U-NT combined with low thorium/U-NT values reflect increased mobility and enrichment of uranium in the carbonate host rocks of that area. Elements characteristically associated with the uranium mineralization include lithium and arsenic. No well defined diffusion halos suggesting outliers of similar uranium mineralization were observed from the stream sediment data in other areas of the Date Creek Basin. Significant concentrations of U-FL or U-NT found outside the mine area are generally coincident with low U-FL/U-NT values and high concentrations of zirconium, titanium, and phosphorus. This suggests that the uranium is related to a resistate mineral assemblage derived from surrounding crystalline igneous and metamorphic rocks.

Butz, T.R.; Tieman, D.J.; Grimes, J.G.; Bard, C.S.; Helgerson, R.N.; Pritz, P.M.

1980-06-30T23:59:59.000Z

373

ET Industries, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ET Industries, Inc. ET Industries, Inc. (showerheads) Issued: May 24, 2013 BEFORE THE U.S. DEPARTMENT OF ENERGY Washington, D.C. 20585 ) ) ) ) ) Case Number: 2012-SE-2902 AMENDED NOTICE OF NONCOMPLIANCE DETERMINATION 1 Manufacturers (including importers) are prohibited from distributing covered products in the United States that do not comply with applicable federal water conservation standards. See 10 C.F.R. §§ 429.5, 429.102; 42 U.S.C. §§ 6291(10), 6302. On April 3, 2012, DOE tested one unit of the "ThunderHead" showerhead basic model ("basic model TH-1 " 2 ), which ET Industries, Inc. ("ET") imported into the United States. On April 24, 2012, DOE completed testing of three additional units of basic model TH-1, also imported into

374

Industrial lighting handbook  

SciTech Connect

Technological advances in industrial lighting system components now make it possible to reduce lighting system consumption by up to 50% or more without loss of the benefits inherent in good quality electric illumination. Management involvement in decisions about industrial lighting is essential, however, and this document provides generalized information in lay terms to help decision-makers become familiar with the concerns that affect industrial environment and the financial well-being of their companies. The five sections (1) discuss the benefits of good lighting, (2) review certain major lighting issues and terms, (3) identify procedures for developing a lighting energy management plan, (4) identify lighting energy management options (LEMOs), and (5) discuss sources of assistance. 19 figures, 8 tables.

1985-01-01T23:59:59.000Z

375

INDUSTRIAL ASSESSMENT CENTER PROGRAM  

Science Conference Proceedings (OSTI)

Since its establishment in 1990, San Diego State University’s Industrial Assessment Center (IAC) has served close to 400 small and medium-sized manufacturing plants in Southern California. SDSU/IAC’s efforts to transfer state-of-the-art technologies to industry have increased revenues, cultivated creativity, improved efficiencies, and benefited the environment. A substantial benefit from the program has been the ongoing training of engineering faculty and students. During this funding cycle, SDSU/IAC has trained 31 students, 7 of the graduate. A total of 92 assessments and 108 assessment days were completed, resulting in 638 assessment recommendations.

ASFAW BEYENE

2008-09-29T23:59:59.000Z

376

China's Industrial Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

China's Industrial Energy China's Industrial Energy Consumption Trends and Impacts of the Top-1000 Enterprises Energy- Saving Program and the Ten Key Energy-Saving Projects Jing Ke, Lynn Price, Stephanie Ohshita, David Fridley, Nina Khanna, Nan Zhou, Mark Levine China Energy Group Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Reprint version of journal article published in "Energy Policy", Volume 50, Pages 562-569, November 2012 October 2012 This work was supported by the China Sustainable Energy Program of the Energy Foundation through the U.S. Department of Energy under Contract No. DE-AC02- 05CH11231. ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY

377

Natural Gas Industrial Price  

Gasoline and Diesel Fuel Update (EIA)

Citygate Price Residential Price Commercial Price Industrial Price Electric Power Price Gross Withdrawals Gross Withdrawals From Gas Wells Gross Withdrawals From Oil Wells Gross Withdrawals From Shale Gas Wells Gross Withdrawals From Coalbed Wells Repressuring Nonhydrocarbon Gases Removed Vented and Flared Marketed Production NGPL Production, Gaseous Equivalent Dry Production Imports By Pipeline LNG Imports Exports Exports By Pipeline LNG Exports Underground Storage Capacity Gas in Underground Storage Base Gas in Underground Storage Working Gas in Underground Storage Underground Storage Injections Underground Storage Withdrawals Underground Storage Net Withdrawals Total Consumption Lease and Plant Fuel Consumption Pipeline & Distribution Use Delivered to Consumers Residential Commercial Industrial Vehicle Fuel Electric Power Period: Monthly Annual

378

Solar industrial process heat  

DOE Green Energy (OSTI)

The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

Lumsdaine, E.

1981-04-01T23:59:59.000Z

379

Industrial Assessment Center  

SciTech Connect

Since its inception, the University of Florida Industrial Assessment Center has successfully completed close to 400 energy assessments of small to medium manufacturing facilities in Florida, southern Georgia and southern Alabama. Through these efforts, recommendations were made that would result in savings of about $5 million per year, with an implementation rate of 20-25%. Approximately 80 engineering students have worked for the UF-IAC, at least 10 of whom went on to work in energy related fields after graduation. Additionally, through the popular course in Industrial Energy Management, many students have graduated from the University of Florida with a strong understanding and support of energy conservation methods.

Dr. Diane Schaub

2007-03-05T23:59:59.000Z

380

> FAQs for Survey Form EIA-888  

Gasoline and Diesel Fuel Update (EIA)

88 88 What is the purpose of this survey? The U.S. Energy Information Administration (EIA) Form EIA-888, "On-Highway Diesel Fuel Price Survey," is designed to collect and publish data on the cash price (including taxes) of self-serve, on-highway diesel fuel. The data are used to calculate average diesel fuel oil prices at the national, regional, and select State levels which are vital to the trucking industry and shippers throughout the United States. These data are point-in-time estimates as of 8:00 a.m. Monday. The prices are released every Monday (Tuesday if Monday is a Federal holiday) through DOE's 24-hour telephone hotline at 202-586-6966. These average prices are also published in the Gasoline & Diesel Fuel Update and released electronically to subscribers of EIA's email notification (regular

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Utility FGD survey: January--December 1989  

Science Conference Proceedings (OSTI)

This is Volume 1 of the Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.

Hance, S.L.; McKibben, R.S.; Jones, F.M.

1992-03-01T23:59:59.000Z

382

Utility FGD survey, Janurary--December 1988  

SciTech Connect

The Utility FGD Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company. Simplified process flow diagrams of FGD systems, definitions, and a glossary of terms are attached to the report. Current data for domestic FGD systems show systems in operation, systems under construction, and systems planned. The current total FGD-controlled capacity in the United States is 67,091 MW. 2 figs., 9 tabs.

Hance, S.L.; McKibben, R.S.; Jones, F.M. (IT Corp., Cincinnati, OH (United States)) [IT Corp., Cincinnati, OH (United States)

1991-09-01T23:59:59.000Z

383

Utility FGD survey, January--December 1988  

Science Conference Proceedings (OSTI)

The Utility FGD Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company. Simplified process flow diagrams of FGD systems, definitions, and a glossary of terms are attached to the report. Current data for domestic FGD systems show systems in operation, systems under construction, and systems planned. The current total FGD-controlled capacity in the United States is 67,091 MW.

Hance, S.L.; McKibben, R.S.; Jones, F.M. (IT Corp., Cincinnati, OH (United States)) [IT Corp., Cincinnati, OH (United States)

1991-09-01T23:59:59.000Z

384

U.S. Geological Survey Energy and Minerals Science Strategy--A Resource Lifecycle Approach  

E-Print Network (OSTI)

.......................................................................................9 5. Isoresource map of Mahogany oil shale zone in Uinta and Piceance Basins showing oil yield....................................... 9 Oil Shale: Evaluating an Energy Resource and Its Extractive Effects

Fleskes, Joe

385

Energy conservation in the primary aluminum and chlor-alkali industries  

SciTech Connect

The primary aluminum and chlor-alkali industries together use nearly 13% of the electrical energy consumed by US industry. As part of its mission to promote energy conservation in basic US industries, the DOE surveys the present technological status of the major electrochemical industries and evaluates promising technological innovations that may lead to reduced energy requirements. This study provides technical and economic analyses in support of a government program of research and development in advanced electrolytic technology. This program is intended to supplement the development efforts directed toward energy savings by private industry. Sections II and III of this report cover aluminum and chlorine production processes only, since these two industries represent over 90% of the electrical energy requirements of all electrolytic industries in the United States. Section IV examines barriers to accelerated research and development by the electrolytic industries, and makes suggestions for government actions to overcome these barriers.

1980-10-01T23:59:59.000Z

386

Industrial Partnerships | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Carbon Fiber Consortium Manufacturing Industrial Partnerships Staff University Partnerships Events and Conferences Success Stories Video Newsletters Staff Contacts Partnerships Home | Connect with ORNL | For Industry | Partnerships | Industrial Partnerships SHARE Industrial Partnerships ORNL takes great pride in its work with U.S. industry. Each year, the Industrial Partnerships team hosts more than 100 visits to ORNL by both large corporations and small companies to help our potential partners understand the capabilities and expertise that exist at the laboratory and the various mechanisms available to help facilitate collaboration. Mechanism for Partnering How do I get started exploring industrial partnerships at ORNL? As the nation's largest science and energy laboratory, it can sometimes be

387

Turning industry visions into reality  

Science Conference Proceedings (OSTI)

This brochure outlines the activities of the Office of Industrial Technologies (OIT) in the Department of Energy. OIT activities are aimed at industry adoption of energy-efficient, pollution-reducing technologies and include research and development on advanced technologies, financing, technical assistance, information dissemination, education, and bringing together industry groups, universities, National Laboratories, states, and environmentalists. OIT`s core initiative is to facilitate partnerships within seven materials and process industries: aluminum, chemicals, forest products, glass, metalcasting, petroleum refining, and steel industries.

NONE

1997-01-01T23:59:59.000Z

388

INTERMOUNTAIN INDUSTRIAL ASSESSMENT CENTER  

SciTech Connect

The U. S. Department of Energy’s Intermountain Industrial Assessment Center (IIAC) at the University of Utah has been providing eligible small- and medium-sized manufacturers with no-cost plant assessments since 2001, offering cost-effective recommendations for improvements in the areas of energy efficiency, pollution prevention, and productivity improvement.

MELINDA KRAHENBUHL

2010-05-28T23:59:59.000Z

389

Industrial cogeneration optimization program  

SciTech Connect

The purpose of this program was to identify up to 10 good near-term opportunities for cogeneration in 5 major energy-consuming industries which produce food, textiles, paper, chemicals, and refined petroleum; select, characterize, and optimize cogeneration systems for these identified opportunities to achieve maximum energy savings for minimum investment using currently available components of cogenerating systems; and to identify technical, institutional, and regulatory obstacles hindering the use of industrial cogeneration systems. The analysis methods used and results obtained are described. Plants with fuel demands from 100,000 Btu/h to 3 x 10/sup 6/ Btu/h were considered. It was concluded that the major impediments to industrial cogeneration are financial, e.g., high capital investment and high charges by electric utilities during short-term cogeneration facility outages. In the plants considered an average energy savings from cogeneration of 15 to 18% compared to separate generation of process steam and electric power was calculated. On a national basis for the 5 industries considered, this extrapolates to saving 1.3 to 1.6 quads per yr or between 630,000 to 750,000 bbl/d of oil. Properly applied, federal activity can do much to realize a substantial fraction of this potential by lowering the barriers to cogeneration and by stimulating wider implementation of this technology. (LCL)

1980-01-01T23:59:59.000Z

390

Synfuels industry opportunities  

SciTech Connect

Presentations made at the seminar are included in this volume. The present state in the development of synthetic fuels and the creation of the Synthetic Fuels Corporation are discussed by representatives of federal agencies and private industry. Separate abstracts of individual items were prepared for inclusion in the Energy Data Base and Energy Abstracts for Policy Analysis. (DMC)

Hill, R.F.; Boardman, E.B.; Heavner, M.L. (eds.)

1981-01-01T23:59:59.000Z

391

Industrial Assessment Center  

SciTech Connect

This project involved providing technical assistance to help small and medium size industries in Wisconsin to reduce operating costs by managing energy, waste and productivity. The project helped save 525 companies on average about $40,000 per year. Under the direction of Dr. Saxena, more than twenty undergraduate and ten graduate students were trained in energy, waste, and productivity management.

Umesh K. Saxena

2009-06-04T23:59:59.000Z

392

Industrial battery stack  

SciTech Connect

A novel industrial battery stack is disclosed, wherein positive plates which have been longitudinally wrapped with a perforate or semi-perforate material are accurately aligned with respect to the negative plates and separators in the stack during the stacking operation. The novel spacing members of the present invention have a generally U-shaped cross section for engaging through the wrapping a portion of the positive plate adjacent to the longitudinal edges of that plate. Projections protruding substantially from the base of the ''U'' provide the proper distance between the edge of the wrapped plate and an adjacent longitudinal surface. During the stacking and burning operation, this longitudinal surface comprises the back wall of a novel industrial battery plate holder. Following the burning of the battery stack and its subsequent assembly into an appropriate industrial battery case, the spacing member or members act to protect the positive battery plates and retain them in their proper alignment during the operation of the battery. Applicants have also provided a novel apparatus and method for stacking, aligning and burning industrial battery stacks which comprises a battery stack holder having several upstanding walls which define a stacking column having a coplanar terminus. An adjustably locatable partition within said stacking column may be disposed at any of a plurality of positions parallel with respect to the coplanar terminus so that the battery stack holder may be adjusted for any of a variety of given sizes of plates and separators. The battery plates and separators may then be stacked into the battery stack holder so that only the plate lugs extrude beyond the coplanar terminus. A dam is insertable along the top of the battery plates and across the top of the upstanding side walls of the battery stack holder to facilitate the rapid efficient burning of the industrial battery stack.

Digiacomo, H.L.; Sacco, J.A.

1980-08-19T23:59:59.000Z

393

Roadmap to the Project: Uranium Miners Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE Roadmap DOE Roadmap Experiments List Oral Histories Records Series Descriptions Overview Documents Declassified Documents Project Events ACHRE Report Uranium Miners Resources Building Public Trust Department of Defense Report FINAL REPORT OF THE RADIATION EXPOSURE COMPENSATION ACT COMMITTEE SUBMITTED TO THE HUMAN RADIATION INTERAGENCY WORKING GROUP JULY, 1996 CONTENTS Executive Summary Proposed Amendments to the Statute Recommended Modifications to the Department of Justice Regulations Introduction Issues Relating to Compensation for Lung Cancer Statutory and Regulatory Framework for Compensation Fairness of the Present Statutory Compensation Criteria Alternative Compensation Criteria Description of the Relative Risk Model Used to Derive Proposed Alternative Criteria, and Model Parameters

394

ConEd (Electric) - Commercial and Industrial Energy Efficiency Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ConEd (Electric) - Commercial and Industrial Energy Efficiency ConEd (Electric) - Commercial and Industrial Energy Efficiency Program ConEd (Electric) - Commercial and Industrial Energy Efficiency Program < Back Eligibility Commercial Industrial Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Manufacturing Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate Large Commercial Energy Study: $50,000 (electric); $67,000 (combined with gas) Program Info Expiration Date 12/31/2015 State New York Program Type Utility Rebate Program Rebate Amount Lighting: Varies widely by type Small Business Energy Surveys: Free Small Business Equipment Upgrades: up to 70% of cost Large Commercial Energy Study: 50% of the cost

395

Mineral revenues: the 1983 report on receipts from Federal and Indian leases with summary data from 1920 to 1983  

DOE Green Energy (OSTI)

Tables and figures abound for: mineral revenue management in 1983; offshore federal mineral revenues; onshore federal mineral revenues; Indian mineral revenues; distribution of federal and Indian mineral revenues; plus appended lease management data. (PSB)

Not Available

1984-01-01T23:59:59.000Z

396

NEPA COMPLIANCE SURVEY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Range Management Survey Date: Range Management Survey Date: 12/6/10 DOE Code: 6730.020.0000 Contractor 8067-788 Code: Project Lead: I Anthony Bowler Project Overview We will use a backhoe to get samples for our range management survey. At each site. one or 1. Brief project descnptlon [include anything that two holes will be excavated, and the samples will be taken from 0-1' and 1-2' deep. After could 1mpad the environment] excavating and the samples taken. the remaining soli Will be replaced and tamped back into 2. Legal location place. 3. Duratfon of tile project See attached NPR-3 Maps for preliminary locations : N~ area well 6-A-2\ NVV SW Section 21 . 4. Major equipment to be used f Township 39N, Range 78E) Middle area well 48-1 -Sh (SE SW 34 Township 39N, Range 4 WU-LSIT£5

397

Operations Improvement Surveys  

E-Print Network (OSTI)

Exxon Chemical Company developed unique site-wide energy optimization technology in the mid1970's. This technology was applied by means of site energy surveys which were carried out at every major Exxon facility throughout the world during the 1976-1981 timeframe. The first 20% of energy savings, versus the 1972 reference, had already been captured or was in progress via conventional energy conservation methods. The site energy surveys identified attractive investments to save a second 20% of energy use. In early 1982, Exxon Corp. started to apply this same technology to its major facilities to define attractive NO INVESTMENT and LOW INVESTMENT operational improvement savings which could be implemented quickly. This presentation covers Exxon's approach to site energy optimization and the Operations Improvement Survey Program. The Program has identified at many sites, an average of 5% reduction in today's energy costs at No/Low investment plus additional savings in the feedstock and energy supply areas.

Guide, J. J.; O'Brien, W. J.

1984-01-01T23:59:59.000Z

398

Hydrothermal alteration in Oregon's Newberry Volcano No. 2: fluid chemistry and secondary-mineral distribution  

SciTech Connect

Newberry 2 was drilled in the caldera floor of Newberry Volcano, Oregon, by the US Geological Survey during 1979-81. The maximum temperature measured was 265C at the bottom of the hole, 932 m below the surface. Rocks recovered fr9om the drill hole are divided into three intervals on the basis of hydrothermal alteration and mineral deposition: (1) 0-290 m consists of unaltered, largely glassy volcanic material, with present temperatures ranging from 20 to 40C; (2) 290-700 m consists of permeable tuff layers, tuff breccia units, and brecciated and fractured rhyodacitic to dacitic lava flows, with temperatures ranging from 40 to 100C; (3) 700-932 m consists of impermeable andesitic to basaltic lava flows that generally show little effect of alteration, interlayered with permeable hydrothermally altered flow breccia, with temperatures gradually increasing from 100 at 700 m to 265C at 932 m. Hydrothermal alteration throughout the system is controlled by rock permeability, temperature, composition of geothermal fluids, and composition and crystallinity of host rocks. Rock alteration consists mainly of replacement of glass by clay minerals and, locally, zeolites, partial replacement of plagioclase phenocrysts by calcite +/- epidote +/- illite, and whole-rock leaching adjacent to fluids channels. Open-space deposition of hydrothermal minerals in fractures, vesicles, and interbreccia pore space is far more abundant than replacement. A cooling shallow convection system in the upper 700 m is indicated by the occurrence of hydrothermal minerals that were deposited in a slightly higher temperature environment than presently exists. Below 700 m, the heat flow is conductive, and fluid flow is controlled by horizontal lava flows. Homogenization temperatures of secondary quartz fluid inclusions were as high as 370C.

Keith, T.E.C.; Mariner, R.H.; Bargar, K.E.; Evans, W.C.; Presser, T.S.

1984-04-01T23:59:59.000Z

399

Industrial Technologies Success Stories - Energy Innovation Portal  

Bookmark Industrial Technologies Success Stories - Energy Innovation Portal on Google; Bookmark Industrial Technologies Success Stories ...

400

Heliostat mirror survey and analysis  

DOE Green Energy (OSTI)

The mirrors used on concentrating solar systems must be able to withstand severe and sustained environmental stresses for long periods of time if they are to be economically acceptable. Little is known about how commercially produced wet process silvered second surface mirrors will withstand the test of time in solar applications. Field experience in existing systems has shown that the performance of the reflective surface varies greatly with time and is influenced to a large extent by the construction details of the mirror module. Degradation of the reflective layer has been seen that ranges from non-observable to severe. The exact mechanisms involved in the degradation process are not well understood from either the phenomenological or microanalytical points of view and are thus subject to much debate. The three chapters of this report summarize the work recently performed in three general areas that are key to understanding and ultimately controlling the degradation phenomena. These areas are: a survey of the present commercial mirroring industry, the microanalytical examination of numerous degraded and nondegraded mirrors, and an investigation of several novel techniques that might be used to extend the life of heliostat mirrors. Appendices include: (a) list of mirror manufacturers and (b) recommended specifications for second surface silvered mirrors for central receiver heliostat applications. (WHK)

Lind, M.A.; Buckwalter, C.Q.; Daniel, J.L.; Hartman, J.S.; Thomas, M.T.; Pederson, L.R.

1979-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Control center survey: Installed and planned applications software  

SciTech Connect

This project surveyed the utility industry use of applications. In addition, the survey collected information regarding future plans to add applications, interest in and knowledge about new control center technologies and identification of current problems that might be solved by new software applications. Over three hundred (300) utilities were surveyed consisting of the investor-owned, rural electric generation and transmission cooperatives, municipal power pools and federally chartered utilities. Of these utilities, 10 are Canadian and 7 are power pools. The rest are United States utilities having a peak demand on installed capacity above 200 MW. The survey was conducted by mailing a questionnaire and/or following up with a telephone call. Information was received from 282 utilities, a 94% response. 13 figs., 14 tabs.

Not Available

1990-02-01T23:59:59.000Z

402

New Geophysical Technique for Mineral Exploration and Mineral Discrimination Based on Electromagnetic Methods  

DOE Green Energy (OSTI)

The research during the first two years of the project was focused on developing the foundations of a new geophysical technique for mineral exploration and mineral discrimination, based on electromagnetic (EM) methods. The developed new technique is based on examining the spectral induced polarization effects in electromagnetic data using effective-medium theory and advanced methods of 3-D modeling and inversion. The analysis of IP phenomena is usually based on models with frequency dependent complex conductivity distribution. In this project, we have developed a rigorous physical/mathematical model of heterogeneous conductive media based on the effective-medium approach. The new generalized effective-medium theory of IP effect (GEMTIP) provides a unified mathematical method to study heterogeneity, multi-phase structure, and polarizability of rocks. The geoelectrical parameters of a new composite conductivity model are determined by the intrinsic petrophysical and geometrical characteristics of composite media: mineralization and/or fluid content of rocks, matrix composition, porosity, anisotropy, and polarizability of formations. The new GEMTIP model of multi-phase conductive media provides a quantitative tool for evaluation of the type of mineralization, and the volume content of different minerals using electromagnetic data. We have developed a 3-D EM-IP modeling algorithm using the integral equation (IE) method. Our IE forward modeling software is based on the contraction IE method, which improves the convergence rate of the iterative solvers. This code can handle various types of sources and receivers to compute the effect of a complex resistivity model. We have demonstrated that the generalized effective-medium theory of induced polarization (GEMTIP) in combination with the IE forward modeling method can be used for rock-scale forward modeling from grain-scale parameters. The numerical modeling study clearly demonstrates how the various complex resistivity models manifest differently in the observed EM data. These modeling studies lay a background for future development of the IP inversion method, directed at determining the electrical conductivity and the intrinsic chargeability distributions, as well as the other parameters of the relaxation model simultaneously. The new technology introduced in this project can be used for the discrimination between uneconomic mineral deposits and the location of zones of economic mineralization and geothermal resources.

Michael S. Zhdanov

2009-03-09T23:59:59.000Z

403

Thermally Speciated Mercury in Mineral Exploration | Open Energy  

Open Energy Info (EERE)

Thermally Speciated Mercury in Mineral Exploration Thermally Speciated Mercury in Mineral Exploration Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Thermally Speciated Mercury in Mineral Exploration Abstract Abstract unavailable. Author S.C. Smith Conference IGES; Dublin, CA; 2003/09/01 Published IGES, 2003 DOI Not Provided Check for DOI availability: http://crossref.org Citation S.C. Smith. 2003. Thermally Speciated Mercury in Mineral Exploration. In: Programs & Abstracts: Soil and Regolith Geochemistry in the Search for Mineral Deposits. IGES; 2003/09/01; Dublin, CA. Dublin, CA: IGES; p. 78 Retrieved from "http://en.openei.org/w/index.php?title=Thermally_Speciated_Mercury_in_Mineral_Exploration&oldid=681717" Categories: References Geothermal References

404

Radioactive Mineral Occurences in Nevada | Open Energy Information  

Open Energy Info (EERE)

Radioactive Mineral Occurences in Nevada Radioactive Mineral Occurences in Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Radioactive Mineral Occurences in Nevada Abstract Abstract unavailable. Author Larry J. Garside Organization Nevada Bureau of Mines and Geology Published Nevada Bureau of Mines and Geology, 1973 Report Number Open File Report 94-2 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Radioactive Mineral Occurences in Nevada Citation Larry J. Garside (Nevada Bureau of Mines and Geology). 1973. Radioactive Mineral Occurences in Nevada. Reno, NV: Nevada Bureau of Mines and Geology. Report No.: Open File Report 94-2. Retrieved from "http://en.openei.org/w/index.php?title=Radioactive_Mineral_Occurences_in_Nevada&oldid=690513"

405

Roadmap to the Project: Uranium Miners Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

EXECUTIVE SUMMARY EXECUTIVE SUMMARY On October 15, 1990, Congress passed the Radiation Exposure Compensation Act of 1990 (RECA), which provided for compassionate payments to individuals who suffered from specified diseases presumably as a result of exposure to radiation in connection with the federal government's nuclear weapons testing program. Among those eligible for compensation under the Act are individuals who were employed in underground uranium mines in Arizona, Colorado, New Mexico, Utah or Wyoming during the 1947 to 1971 time period, who were exposed to specified minimum levels of radon, and who contracted specified lung disorders. The Department of Justice administers the RECA through the Radiation Exposure Compensation Program (Program). The provisions of the RECA defining compensation for uranium miners have been characterized by critics as unfair and inconsistent with current scientific information. The regulations of the Department of Justice implementing the statute have also been criticized as being unnecessarily stringent and unreasonably burdensome. These criticisms were noted, and in some cases affirmed, by the President's Advisory Committee on Human Radiation Experiments, charged by the President to investigate the history of human radiation experimentation conducted by the federal government during the Cold War period. In its Final Report, issued on October 3, 1995, the Advisory Committee recommended, among other things, that the Administration review the provisions of RECA governing compensation for uranium miners and the implementing regulations to ensure that they are fair, consistent with current scientific evidence, and compatible with the objectives of the Act.

406

Update on Energy Saving Opportunities in Industrial Electrical Power Systems  

E-Print Network (OSTI)

High electrical power costs, rising at a rate consistently above that of general inflation, force the industrial power user to continuously update and evaluate available means of saving electrical energy. This paper provides a survey of one company's experience with several methods of energy conservation in electrical distribution systems, and its present practices in this area. Topics covered include the location of large and reducible losses, the determination of the worth of these losses, and a survey of ways to reduce them in an economical manner.

Frasure, J. W.; Fredericks, C. J.

1986-06-01T23:59:59.000Z

407

ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry: Chapter 8: Phosphate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 8 Phosphates The element phosphorus, a nonmetal, is relatively rare in nature. In fact, phosphorus is less than one tenth of one percent of the mass of the earth's crust. Common mineral forms of phosphorus include apatite, wavellite, vivianite, and phosphorite. The most important sources of phosphorus are phosphorite or phosphate rock. Phosphate rock consists of the mineral apatite, an impure tricalcium phosphate, mixed with clay and other elements. Forms of Phosphorus Elemental phosphorus is made commercially in several different forms called allotropes. These occur within three major categories: white or yellow phosphorus; red phosphorus; and black or violet phosphorus. Other phosphorus compounds are used by industry in the production of steel,

408

Industrial Energy Procurement Contracts  

E-Print Network (OSTI)

Rates are going down and services are improving! Or are they? As opportunities to directly contract for energy expand from the larger industrials to include mid-market companies, existing energy supply and service contracts will be renegotiated and new ones developed. Many of these mid-level industrial customers typically lack in-house expertise on energy procurement, yet their operations use significant amounts of energy. This paper looks at some of the issues involved in the main terms of a procurement contract, as well as issues in contract formation and termination. Finally the paper reviews some of the recent energy aggregation and outsourcing deals to highlight some that worked and some that didn't.

Thompson, P.; Cooney, K.

2000-04-01T23:59:59.000Z

409

Coal industry annual 1993  

Science Conference Proceedings (OSTI)

Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

Not Available

1994-12-06T23:59:59.000Z

410

Industrial Facilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial Facilities Industrial Facilities Industrial Facilities October 8, 2013 - 10:14am Addthis The Federal Energy Management Program (FEMP) encourages Federal agencies requiring assistance with implementing energy-efficiency measures in their industrial facilities to hire a U.S. Department of Energy Industrial Assessment Center (IAC) for assessment services. The following resources can be used to plan and implement industrial facility energy-efficiency projects. Technical Publications: The Advanced Manufacturing Office (AMO) website offers fact sheets, handbooks, and self-assessment manuals covering steam system efficiency, fundamentals of compressed air systems, motor systems management, and other topics. Tools: The AMO website offers valuable software tools for evaluating

411

Transforming the Oil Industry into the Energy Industry  

E-Print Network (OSTI)

Transforming the Oil Industry into the Energy Industry BYculprit. It consumes half the oil used in the world andconsuming two thirds of the oil and causing about one third

Sperling, Daniel; Yeh, Sonia

2009-01-01T23:59:59.000Z

412

Evolution of industrial automation  

Science Conference Proceedings (OSTI)

Automation has been of high priority for the manufacturing sector, from Ford's first set of Model-T Assembly lines in the early 1920s to the modern factory floor. With appropriate automation, the aim was to rationalise the production and keep ... Keywords: Ethernet, architecture, automated manufacturing, bus topology, control servers, distributed control, economies of scale, embedded intelligence, functionality, fuzzy logic, global village, graphic panel, industrial automation, networking, networks

R. Murugesan

2006-03-01T23:59:59.000Z

413

Industrial - Utility Cogeneration Systems  

E-Print Network (OSTI)

Cogeneration may be described as an efficient method for the production of electric power in conjunction with process steam or heat which optimizes the energy supplied as fuel to maximize the energy produced for consumption. In a conventional electric utility power plant, considerable energy is wasted in the form of heat rejection to the atmosphere thru cooling towers, ponds or lakes, or to rivers. In a cogeneration system heat rejection can be minimized by systems which apply the otherwise wasted energy to process systems requiring energy in the form of steam or heat. Texas has a base load of some 75 million pounds per hour of process steam usage, of which a considerable portion could be generated through cogeneration methods. The objective of this paper is to describe the various aspects of cogeneration in a manner which will illustrate the energy saving potential available utilizing proven technology. This paper illustrates the technical and economical benefits of cogeneration in addition to demonstrating the fuel savings per unit of energy required. Specific examples show the feasibility and desirability of cogeneration systems for utility and industrial cases. Consideration of utility-industrial systems as well as industrial-industrial systems will be described in technical arrangement as well as including a discussion of financial approaches and ownership arrangements available to the parties involved. There is a considerable impetus developing for the utilization of coal as the energy source for the production of steam and electricity. In many cases, because of economics and site problems, the central cogeneration facility will be the best alternative for many users.

Harkins, H. L.

1979-01-01T23:59:59.000Z

414

Industrial Energy Use Indices  

E-Print Network (OSTI)

Energy use indices and associated coefficients of variation are computed for major industry categories for electricity and natural gas use in small and medium-sized plants in the U.S. Standard deviations often exceed the average EUI for an energy type, with coefficients of variation averaging 290% for 8,200 plants from all areas of the continental U.S. Data from milder climates appears more scattered than that from colder climates. For example, the ratio of the average of coefficient of variations for all industry types in warm versus cold regions of the U.S. generally is greater than unity. Data scatter may have several explanations, including climate, plant area accounting, the influence of low cost energy and low cost buildings used in the south of the U.S. This analysis uses electricity and natural gas energy consumption and area data of manufacturing plants available in the U.S. Department of Energy’s national Industrial Assessment Center database.

Hanegan, A.; Heffington, W. M.

2007-01-01T23:59:59.000Z

415

Evolution of the U.S. Energy Service Company Industry: Market Size and Project Performance from 1990-2008  

E-Print Network (OSTI)

and S. Rezessy. 2010. “Energy Service Companies Market inSurvey of the U.S. Energy Services Company (ESCO) Industry:and E. Vine, 2006. “Energy service companies in European

Goldman, Charles A.

2013-01-01T23:59:59.000Z

416

DC Resistivity Survey (Schlumberger Array) | Open Energy Information  

Open Energy Info (EERE)

Schlumberger Array) Schlumberger Array) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: DC Resistivity Survey (Schlumberger Array) Details Activities (2) Areas (2) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Geophysical Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Vertical Electrical Sounding Configurations Information Provided by Technique Lithology: Rock composition, mineral and clay content Stratigraphic/Structural: Detection of permeable pathways, fracture zones, faults Hydrological: Resistivity influenced by porosity, grain size distribution, permeability, fluid saturation, fluid type and phase state of the pore water Thermal: Resistivity influenced by temperature

417

DC Resistivity Survey (Wenner Array) | Open Energy Information  

Open Energy Info (EERE)

Wenner Array) Wenner Array) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: DC Resistivity Survey (Wenner Array) Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Geophysical Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Vertical Electrical Sounding Configurations Information Provided by Technique Lithology: Rock composition, mineral and clay content Stratigraphic/Structural: Detection of permeable pathways, fracture zones, faults Hydrological: Resistivity influenced by porosity, grain size distribution, permeability, fluid saturation, fluid type and phase state of the pore water Thermal: Resistivity influenced by temperature Dictionary.png

418

DC Resistivity Survey (Pole-Dipole Array) | Open Energy Information  

Open Energy Info (EERE)

Pole-Dipole Array) Pole-Dipole Array) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: DC Resistivity Survey (Pole-Dipole Array) Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Geophysical Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Electrical Profiling Configurations Information Provided by Technique Lithology: Rock composition, mineral and clay content Stratigraphic/Structural: Detection of permeable pathways, fracture zones, faults Hydrological: Resistivity influenced by porosity, grain size distribution, permeability, fluid saturation, fluid type and phase state of the pore water Thermal: Resistivity influenced by temperature Dictionary.png

419

New techniques and products solve industry problems. [New technology available for the natural gas pipeline industry  

SciTech Connect

Recently introduced technology advances in data handling, manipulation and delivery; new gas and storage marketing products; a nonintrusive pipe-crack arrester; and responsive pipe-coating mill construction show promise for cutting industry costs by increasing efficiency in pipe line construction, repair, rehabilitation, and operations. The products, services and methods described in this new technology survey include: a PC-compatible dataserver that requires no user programming; flexible, responsive gas transportation scheme; evaluation of possible further uses on brittle transmission lines for fiberglass-reinforced resin composite; new multilayer epoxy PE coating mill in Corinth, Greece, near areas where large pipe line construction and rehabilitation projects are contemplated.

Bullion, L.

1993-09-01T23:59:59.000Z

420

Biogas yield and quality improvement and purification with natural minerals.  

E-Print Network (OSTI)

??Research goal and objective. To investigate the possibilities of the use of mineral raw materials of local origin for the purification of biogas produced from… (more)

?iutelyt?, R?ta

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

DOE - Office of Legacy Management -- Heavy Minerals Inc - IL...  

Office of Legacy Management (LM)

Subject: FUSRAP Considered Site Recommendation; July 9, 1990. IL.14-2 - Heavy Minerals Co. Letter; Wyatt to Faulkner; Subject: Crude Thorium Hydroxide Proposal; December 1, 1954...

422

Investigation on Mineral, Microstructure and Activity of Coal Gangue ...  

Science Conference Proceedings (OSTI)

In this study, seven coal gangue samples covering a wide range of chemical composition were collected from Shanxi Province, China. The mineral composition ...

423

Hyperspectral mineral mapping in support of geothermal exploration...  

Open Energy Info (EERE)

2004 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Hyperspectral mineral mapping in support of geothermal exploration- Examples...

424

Epithermal Gold Mineralization and a Geothermal Resource at Blue...  

Open Energy Info (EERE)

1991 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Epithermal Gold Mineralization and a Geothermal Resource at Blue Mountain,...

425

Mineralization of Synthetic Polymer Scaffolds: A Bottom-Up ...  

Mineralization of Synthetic Polymer Scaffolds: A Bottom-Up Approach for the Development of Artificial Bone Jie Song,*,†,‡ Viengkham Malathong,† and Carolyn R ...

426

Optimization on Compression Strength of Resin Mineral Composite  

Science Conference Proceedings (OSTI)

Abstract Scope, Using natural granite particles as aggregate and organic resin as binder, resin mineral composite (RMC) has good vibration damping properties ...

427

Reclamation of Land Used for Mineral Mining (Virginia)  

Energy.gov (U.S. Department of Energy (DOE))

This legislation aims to provide for the rehabilitation and conservation of land affected by the mining of minerals through proper planning, proper use of appropriate methods of mining,...

428

Application of Biomass Waste Materials in the Nano Mineral Synthesis  

Science Conference Proceedings (OSTI)

Some of the biomass waste material were effectively applied to the nano-sized minerals synthesis under conrolled boundry experimenta conditions.

429

A Review Of Water Contents Of Nominally Anhydrous Natural Minerals...  

Open Energy Info (EERE)

A Review Of Water Contents Of Nominally Anhydrous Natural Minerals In The Mantles Of Earth, Mars And The Moon Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal...

430

Heterogeneous Reactions on Mineral Dust: Surface Reactions of...  

NLE Websites -- All DOE Office Websites (Extended Search)

Reactions on Mineral Dust: Surface Reactions of Sulfur Dioxide, Ozone, Nitric and Acetic Acid on Oxide and Carbonate Particles Speaker(s): Vicki Grassian Date: June 14,...

431

Economics and policy implications of industrial fuel usage  

Science Conference Proceedings (OSTI)

The nation's use of wood as fuel is put into perspective, recognizing constraints imposed by governmental initiatives and actions. The forest product industry, and its use of wood for energy, is surveyed. The effect of PURPA on this industry, the nation's leader in cogeneration, is discussed. Proposed energy taxes would reverse recent trends in energy conservation. Low sulphur content frees wood and its residues from environmental legislation. Federal funding is needed to determine the extent of the economically accessible fuel wood. The proposed deregulation of natural gas will affect wood use adversely.

Slinn, D.J.

1983-06-01T23:59:59.000Z

432

Industrial applications of solar energy. First quarterly progress report  

DOE Green Energy (OSTI)

The objective of this program is to define solar energy systems that are technically and economically feasible, can satisfy all or part of selected industry demands, and to determine the market potential for such systems. The primary emphasis is placed on the application of total energy systems where industrial process heat, electrical needs, and space heating and cooling requirements are satisfied with a single solar collector field at maximum possible efficiency. Industrial energy usage in the United States and the Southwest was surveyed to determine which industries were most energy intensive. This resulted in the selection of six major groups: (1) Chemicals and Allied Products - SIC 28, (2) Primary Metals - SIC 33, (3) Petroleum and Coal Products - SIC 29, (4) Paper and Allied Products - SIC 26, (5) Stone, Clay, and Glass Products - SIC 32, and (6) Food and Kindred Products - SIC 20. These groupings account for approximately 80% of the total industrial energy usage, both nationwide and within the Southwest. These major groups were then pursued through their subdivisions to determine more specifically the largest energy users and their locations within the Southwest, allowing the final industry selection. Approximately 300 representatives of the selected industries were contacted to determine their specific energy requirements as well as architecturally related energy parameters. Climatic and seismic data is also being collected for the areas encompassing the selected regions.

Rogan, J.E.

1976-01-01T23:59:59.000Z

433

Wireless sensor network survey  

Science Conference Proceedings (OSTI)

A wireless sensor network (WSN) has important applications such as remote environmental monitoring and target tracking. This has been enabled by the availability, particularly in recent years, of sensors that are smaller, cheaper, and intelligent. These ... Keywords: Protocols, Sensor network deployment, Sensor network services, Survey, Wireless sensor network

Jennifer Yick; Biswanath Mukherjee; Dipak Ghosal

2008-08-01T23:59:59.000Z

434

NETL: Industrial Capture & Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Capture & Storage Industrial Capture & Storage Technologies Industrial Capture & Storage The United States Department of Energy, National Energy Technology Laboratory (DOE/NETL, or DOE) is currently implementing a program titled "Carbon Capture and Sequestration from Industrial Sources and Innovative Concepts for Beneficial CO2 Use." This CO2 Capture and Sequestration (CCS) and CO2 use program is a cost-shared collaboration between the Government and industry whose purpose is to increase investment in clean industrial technologies and sequestration projects. In accordance with the American Recovery and Reinvestment Act of 2009, and Section 703 of Public Law 110-140, DOE's two specific objectives are to demonstrate: (1) Large-Scale Industrial CCS projects from industrial sources, and (2) Innovative Concepts for beneficial CO2 use.

435

Deaerators in Industrial Steam Systems  

SciTech Connect

This revised ITP tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

436

Industry Professional | Open Energy Information  

Open Energy Info (EERE)

Industry Professional Jump to: navigation, search How to GET INVOLVED WITH OpenEI Get involved with OpenEI Programmer.jpg Industry Professional Do you have valuable information...

437

Texas Industries of the Future  

E-Print Network (OSTI)

The purpose of the Texas Industries of the Future program is to facilitate the development, demonstration and adoption of advanced technologies and adoption of best practices that reduce industrial energy usage, emissions, and associated costs, resulting in improved competitive performance. The bottom line for Texas industry is savings in energy and materials, cost-effective environmental compliance, increased productivity, reduced waste, and enhanced product quality. The state program leverages the programs and tools of the federal Department of Energy's Industries of the Future. At the federal level, there are nine Industries of the Future: refining, chemicals, aluminum, steel, metal casting, glass, mining, agriculture, and forest products. These industries were selected nationally because they supply over 90% of the U.S. economy's material needs and account for 75% of all energy use by U.S. industry. In Texas, three IOF sectors, chemicals, refining and forest products, account for 86% of the energy used by industry in this state.

Ferland, K.

2002-04-01T23:59:59.000Z

438

Empirical essays in industrial organization  

E-Print Network (OSTI)

In this dissertation, I present three empirical essays that encompass topics in industrial organization. The first essay examines the degree of competition and spatial differentiation in the retail industry by exploiting ...

Chiou, Lesley C

2005-01-01T23:59:59.000Z

439

High Technology and Industrial Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Semiconductor clean room Semiconductor clean room High Technology and Industrial Systems EETD's research on high technology buildings and industrial systems is aimed at reducing energy consumed by the industrial sector in manufacturing facilities, including high technology industries such as data centers, cleanrooms in the such industries as electronics and pharmaceutical manufacturing, and laboratories, improving the competitiveness of U.S. industry. Contacts William Tschudi WFTschudi@lbl.gov (510) 495-2417 Aimee McKane ATMcKane@lbl.gov (518) 782-7002 Links High-Performance Buildings for High-Tech Industries Industrial Energy Analysis Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

440

Industrial Applications for Renewable Resources  

Science Conference Proceedings (OSTI)

This CD-ROM contains the PowerPoint presentations from the presenters from Industrial Applications of Renewable Resources: A Conference on Sustainable Technologies. Industrial Applications for Renewable Resources Biofuels and Bioproducts and Biodiesel DV

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

2010 Federal Employee Viewpoint Survey  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Employee Viewpoint Survey Federal Employee Viewpoint Survey Page 1 of 20 ________________________________________________________________________________________________________________________________________________________________________________________________________________ Department of Energy 2010 Federal Employee Viewpoint Survey: Trend Report (2006 and 2008 results have been recalculated to exclude Do Not Know/No Basis to Judge responses) Response Summary Surveys Completed 2010 Governmentwide 263,475 2010 Department of Energy 6,648 2008 Department of Energy 6,093 2006 Department of Energy 7,742 This 2010 Federal Employee Viewpoint Survey Report provides summary results for your department or agency. The results include Positive, Neutral, and Negative response percentages for each survey item. For each of the

442

Small DR Industry Experiences  

Science Conference Proceedings (OSTI)

Over the past twenty years, a number of companies have developed products and provided services for the small distributed resources (DR) market. There are powerful lessons and insights to gain from these efforts. With the growing interest in DR and the emergence of new technologies and products in the less than 300kW size range, this report looks at the past and the different paths that companies have taken to bring small power products to market. Representative surveys were conducted of major players in...

2000-12-06T23:59:59.000Z

443

FACILITY SURVEY & TRANSFER Facility Survey & Transfer Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SURVEY & TRANSFER SURVEY & TRANSFER Facility Survey & Transfer Overview Transfer Activities Checklist Pre-Survey Information Request Survey Report Content Detailed Walkdown Checklist Walkdown Checklist Clipboard Aids S & M Checklist Survey Report Example - Hot Storage Garden Survey Report Example - Tritium System Test Assembly Survey Report Example - Calutron Overview As DOE facilities become excess, many that are radioactively and/or chemically contaminated will become candidate for transfer to DOE-EM for deactivation and decommissioning. Requirements and guidance for such transfers are contained in:  DOE Order 430.1B Chg. 2, REAL PROPERTY & ASSET MANAGEMENT  DOE Guide 430.1-5, TRANSITION IMPLEMENTATION GUIDE The transfer process is illustrated in the Transfer Process figure. The purpose here is to provide examples of methods and

444

Partnering Highlights - Industrial Partnerships Office  

Lawrence Livermore National Laboratory (LLNL) is participating in six industry projects for the advancement of energy technologies using high ...

445

New Geophysical Technique for Mineral Exploration and Mineral Discrimination Based on Electromagnetic Methods  

DOE Green Energy (OSTI)

The research during the first year of the project was focused on developing the foundations of a new geophysical technique for mineral exploration and mineral discrimination, based on electromagnetic (EM) methods. The proposed new technique is based on examining the spectral induced polarization effects in electromagnetic data using modern distributed acquisition systems and advanced methods of 3-D inversion. The analysis of IP phenomena is usually based on models with frequency dependent complex conductivity distribution. One of the most popular is the Cole-Cole relaxation model. In this progress report we have constructed and analyzed a different physical and mathematical model of the IP effect based on the effective-medium theory. We have developed a rigorous mathematical model of multi-phase conductive media, which can provide a quantitative tool for evaluation of the type of mineralization, using the conductivity relaxation model parameters. The parameters of the new conductivity relaxation model can be used for discrimination of the different types of rock formations, which is an important goal in mineral exploration. The solution of this problem requires development of an effective numerical method for EM forward modeling in 3-D inhomogeneous media. During the first year of the project we have developed a prototype 3-D IP modeling algorithm using the integral equation (IP) method. Our IE forward modeling code INTEM3DIP is based on the contraction IE method, which improves the convergence rate of the iterative solvers. This code can handle various types of sources and receivers to compute the effect of a complex resistivity model. We have tested the working version of the INTEM3DIP code for computer simulation of the IP data for several models including a southwest US porphyry model and a Kambalda-style nickel sulfide deposit. The numerical modeling study clearly demonstrates how the various complex resistivity models manifest differently in the observed EM data. These modeling studies lay a background for future development of the IP inversion method, directed at determining the electrical conductivity and the intrinsic chargeability distributions, as well as the other parameters of the relaxation model simultaneously. The new technology envisioned in this proposal, will be used for the discrimination of different rocks, and in this way will provide an ability to distinguish between uneconomic mineral deposits and the location of zones of economic mineralization and geothermal resources.

Michael S. Zhdanov

2005-03-09T23:59:59.000Z

446

Aluminum: Industry of the future  

SciTech Connect

For over a century, the US aluminum industry has led the global market with advances in technology, product development, and marketing. Industry leaders recognize both the opportunities and challenges they face as they head into the 21st century, and that cooperative R and D is key to their success. In a unique partnership, aluminum industry leaders have teamed with the US Department of Energy`s Office of Industrial Technologies (OIT) to focus on innovative technologies that will help to strengthen the competitive position of the US aluminum industry and, at the same time, further important national goals. This industry-led partnership, the Aluminum Industry of the Future, promotes technologies that optimize the use of energy and materials in operations and reduce wastes and energy-related emissions. Led by The Aluminum Association, industry leaders began by developing a unified vision of future market, business, energy, and environmental goals. Their vision document, Partnerships for the Future, articulates a compelling vision for the next 20 years: to maintain and grow the aluminum industry through the manufacture and sale of competitively priced, socially desirable, and ecologically sustainable products. Continued global leadership in materials markets will require the combined resources of industry, universities, and government laboratories. By developing a unified vision, the aluminum industry has provided a framework for the next step in the Industries of the Future process, the development of a technology roadmap designed to facilitate cooperative R and D.

1998-11-01T23:59:59.000Z

447

Growth and Characterization of Complex Mineral Surfaces  

SciTech Connect

Precipitation of mineral aggregates near the Earth's surface or in subsurface fractures and cavities often produces complex microstructures and surface morphologies. Here we demonstrate how a simple surface normal growth (SNG) process may produce microstructures and surface morphologies very similar to those observed in some natural carbonate systems. A simple SNG model was used to fit observed surfaces, thus providing information about the growth history and also about the frequency and spatial distribution of nucleation events during growth. The SNG model can be extended to systems in which the symmetry of precipitation is broken, for example by fluid flow. We show how a simple modification of the SNG model in which the local growth rate depends on the distance from a fluid source and the local slope or fluid flow rate, produces growth structures with many similarities to natural travertine deposits.

P. Meakin; E. Jettestuen; B. Jamtveit; Y. Y. Podladchikov; S. deVilliers; H. E. F. Amundsen

2006-09-01T23:59:59.000Z

448

The impact of government policies on industrial evolution : the case of China's automotive industry  

E-Print Network (OSTI)

Governmental industrial policies have great influence on industrial performances and development trajectories. The infant industry theory has been the dominating theoretical foundation of the industrial policies in developing ...

Luo, Jianxi

2006-01-01T23:59:59.000Z

449

Recent developments: Industry briefs  

SciTech Connect

The January 1992 Industry Briefs includes brief articles on: (1) the startup of Chinese and Indian nuclear units, (2) agreements between China and Pakistan for the construction of a nuclear unit, (3) international safeguards agreements, (4) restart of a nuclear unit in Armenia, (5) closure of a German nuclear waste site, (6) restructuring of the Hungarian state-owned utility MVMT, (7) requests for bids for Wolsong Units 3 and 4, (8) signing of the European Energy charter, (9) continued operation of the MAGNOX reactors, and (10) changing Canadian requirements on uranium.

NONE

1992-01-01T23:59:59.000Z

450

Coal industry annual 1996  

Science Conference Proceedings (OSTI)

This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

NONE

1997-11-01T23:59:59.000Z

451

Recent developments: Industry briefs  

Science Conference Proceedings (OSTI)

This article is the `Industry Briefs` portion of Nuexco`s September 1992 `Recent Developments` section. Specific iems discussed include: (1) merger of Urangesellschaft and Interuran, (2) cessation of uranium mining in Bulgaria, (3) record operation of Limerick-2 and Tokai-2, (4) MRS in Wyoming, (5) low-level waste facilities at Perry, (6) closure of Trojan, (7) restart of Kozloduy-6, (8) agreements between Cogema and Minatom, (9) planning for a large nuclear power plant in Japan moves forward, (10) order of a new reactor at Civaux, (11) relicensing of Yankee Rowe, (12) operation of Bradwell-2, and (13) high-level waste management in Japan.

NONE

1992-09-01T23:59:59.000Z

452

Recent developments: Industry briefs  

Science Conference Proceedings (OSTI)

This article is the `Industry Briefs` portion of Nuexco`s August 2992 `Recent Developments` section. Specific items discussed include: (1) non-proliferation in Argentina and Brazil, (2) a joint-venture uranium leaching project in the USA, (3) life extension for Yankee Rowe, (4) contracts for nuclear plants in the Republic of Korea, (5) cleanup of Wismut, (6) record operation of Three Mile Island-1, Oconee-1, and Cook-1, (7) closure of Kozloduy units, (8) China`s ascension to the non-proliferation treaty, and (9) a centrifuge enrichment facility in Japan.

NONE

1991-08-01T23:59:59.000Z

453

Coal Industry Annual 1995  

SciTech Connect

This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

1996-10-01T23:59:59.000Z

454

The changing battery industry  

SciTech Connect

This report provides an economic and technological assessment of the electrical battery industry, highlighting major trends. Among those systems considered are lithium-based, sodium-sulfur nickel-zinc, nickel-iron, nickel-hydrogen, zinc-chloride, conductive polymer, and redox cells. Lead-acid, nickel-cadmium, and manganese dioxide-based batteries and direct solar power and fuel cells are discussed in relation to these new techniques. New applications, including electric vehicles, solar power storage, utility load leveling, portable appliances, computer power and memory backup, and medical implants are discussed. Predictions and development scenarios for the next twenty years are provided for the U.S. market.

Not Available

1987-01-01T23:59:59.000Z

455

Pretreatment of industrial discharges to publicly owned treatment works (POTW)  

SciTech Connect

A discussion covers a brief survey of federal regulations establishing standards for the pretreatment of pollutants discharged into POTW's; the experience of the Municipality of Metropolitan Seattle (Metro) in dealing with the pretreatment of heavy metals in industrial and commercial discharges; a study and analysis by Seattle Metro of organic priority pollutants in wastewater including identification sources; and POTW treatment control technology for organic priority pollutants in Seattle Metro.

Ongerth, J.E.; Dewalle, F.B.

1980-08-01T23:59:59.000Z

456

Industrial safety and applied health physics. Annual report for 1977  

SciTech Connect

Progress is reported on the following: radiation monitoring with regard to personnel monitoring and health physics instrumentation; environs surveillance with regard to atmospheric monitoring, water monitoring, radiation background measurements, and soil and grass samples; radiation and safety surveys with regard to laboratory operations monitoring, radiation incidents, and laundry monitoring; industrial safety and special projects with regard to accident analysis, disabling injuries, and safety awards. (HLW)

Auxier, J.A.; Davis, D.M.

1978-06-01T23:59:59.000Z

457

Human factors aspects of advanced instrumentation in the nuclear industry  

SciTech Connect

An important consideration in regards to the use of advanced instrumentation in the nuclear industry is the interface between the instrumentation system and the human. A survey, oriented towards identifying the human factors aspects of digital instrumentation, was conducted at a number of United States (US) and Canadian nuclear vendors and utilities. Human factors issues, subsumed under the categories of computer-generated displays, controls, organizational support, training, and related topics were identified. 20 refs., 2 tabs.

Carter, R.J.

1989-01-01T23:59:59.000Z

458

ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry: Chapter 1: U.S. Mining Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 Mining Overview 1. Mining: Backbone of the U.S. Economy Mining is the search for, extraction, and beneficiation and processing of solid minerals from the earth. The kinds of minerals extracted from the earth vary widely. For thousands of years, these and other minerals have provided the raw materials with which human civilizations have been built. The United States Department of Energy and the National Mining Association are working in partnership to implement the Mining Industry of the Future strategy. Cooperatively, the Department of Energy and National Mining Association selected specific mineral commodities to review in this Mining Energy and Environmental Profile. These commodities require significant energy to extract and prepare for first saleable product and have the potential for

459

2006 NERSC User Survey Results  

NLE Websites -- All DOE Office Websites (Extended Search)

6 User Survey Results 6 User Survey Results Show All | 1 2 3 4 5 ... 15 | Next » 2006 User Survey Results Table of Contents Survey Results Users are invited to provide overall comments about NERSC: Here are the survey results: Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness Ratings All Usefulness Topics Hardware Resources Software Visualization and Data Analysis HPC Consulting Services and Communications Web Interfaces Training Comments about NERSC Survey Results Many thanks to the 256 users who responded to this year's User Survey. This represents a response rate of about 13 percent of the active NERSC users. The respondents represent all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's

460

Building materials using binders and solid combustible minerals  

Science Conference Proceedings (OSTI)

Local materials including low-quality solid combustible minerals and their wastes, are being used to cheapen building costs. The author reviews the use of solid combustible minerals and their carbonaceous wastes as nonbaking binders of the lime-pozzolana type in the production of building and other materials.

Gorlov, E.G.

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Mineral formation during simulated leaks of Hanford waste tanks  

E-Print Network (OSTI)

Mineral formation during simulated leaks of Hanford waste tanks Youjun Deng a , James B. Harsh a at the US DOE Hanford Site, Washington, caus- ing mineral dissolution and re-precipitation upon contact mimicking tank leak conditions at the US DOE Hanford Site. In batch experiments, Si-rich solutions

Flury, Markus

462

Reduction of carbon dioxide emissions by mineral carbonation  

Science Conference Proceedings (OSTI)

The study investigates the technologies that have the potential to provide feasible reduction of carbon dioxide (CO2) from a reference power plant. Particular focus has been given to mineral carbonation (at 1 bar) in which magnesium (Mg) and/or ... Keywords: carbon dioxide, emissions, mineral carbonation

C. J. Sturgeon; M. G. Rasul; Ashfaque Ahmed Chowdhury

2010-02-01T23:59:59.000Z

463

Use of hybrid intelligent computing in mineral resources evaluation  

Science Conference Proceedings (OSTI)

Mineral resources are a formal quantification of naturally occurring materials. Estimation of resource parameters such as grade and thickness may be carried out using different methodologies. In this paper, a soft methodology, which is artificial neural ... Keywords: Fuzzy-neural network, Grade estimation, Hybrid modelling, Mineral resource

B. Tutmez

2009-06-01T23:59:59.000Z

464

Guardian Industries | Open Energy Information  

Open Energy Info (EERE)

Industries Industries Jump to: navigation, search Name Guardian Industries Place Auburn Hills, MI Website http://www.guardian.com/ References Results of NREL Testing (Glass Magazine)[1] Guardian News Archive[2] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Other Relationship Partnering Center within NREL Transportation Technologies and Systems Partnership Year 2002 LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Guardian Industries is a company located in Auburn Hills, MI. References ↑ "Results of NREL Testing (Glass Magazine)" ↑ "Guardian News Archive" Retrieved from "http://en.openei.org/w/index.php?title=Guardian_Industries&oldid=381719" Categories: Clean Energy Organizations

465

Outlook for Industrial Energy Benchmarking  

E-Print Network (OSTI)

The U.S. Environmental Protection Agency is exploring options to sponsor an industrial energy efficiency benchmarking study to identify facility specific, cost-effective best practices and technologies. Such a study could help develop a common understanding of opportunities for energy efficiency improvements and provide additional information to improve the competitiveness of U.S. industry. The EPA's initial benchmarking efforts will focus on industrial power facilities. The key industries of interest include the most energy intensive industries, such as chemical, pulp and paper, and iron and steel manufacturing.

Hartley, Z.

2000-04-01T23:59:59.000Z

466

Chemical production from industrial by-product gases: Final report  

DOE Green Energy (OSTI)

The potential for conservation of natural gas is studied and the technical and economic feasibility and the implementation of ventures to produce such chemicals using carbon monoxide and hydrogen from byproduct gases are determined. A survey was performed of potential chemical products and byproduct gas sources. Byproduct gases from the elemental phosphorus and the iron and steel industries were selected for detailed study. Gas sampling, preliminary design, market surveys, and economic analyses were performed for specific sources in the selected industries. The study showed that production of methanol or ammonia from byproduct gas at the sites studied in the elemental phosphorus and the iron and steel industries is technically feasible but not economically viable under current conditions. Several other applications are identified as having the potential for better economics. The survey performed identified a need for an improved method of recovering carbon monoxide from dilute gases. A modest experimental program was directed toward the development of a permselective membrane to fulfill that need. A practical membrane was not developed but further investigation along the same lines is recommended. (MCW)

Lyke, S.E.; Moore, R.H.

1981-04-01T23:59:59.000Z

467

Sloan digital sky survey  

SciTech Connect

The Sloan Digital Sky Survey will produce a detailed digital photometric map of half the northern sky to about 23 magnitude using a special purpose wide field 2.5 meter telescope. From this map we will select {approximately} 10{sup 6} galaxies and 10{sup 5} quasars, and obtain high resolution spectra using the same telescope. The imaging catalog will contain 10{sup 8} galaxies, a similar number of stars, and 10{sup 6} quasar candidates.

Kent, S.M.; Stoughton, C.; Newberg, H.; Loveday, J.; Petravick, D.; Gurbani, V.; Berman, E.; Sergey, G. [Fermi National Accelerator Lab., Batavia, IL (United States); Lupton, R. [Princeton Univ., NJ (United States)

1994-04-01T23:59:59.000Z

468

Survey of solar homeowners  

SciTech Connect

Some key results are presented of a national mail survey of 3800 solar homeowners. The solar owners expressed their perceptions about performance, cost, problem areas, and their own motivations and degree of satisfaction. Various types of residential solar installations are represented, including active and passive water heating, space heating, and wind energy systems. After each question put to the respondents, the breakdown of answers is listed and a brief interpretation of the findings is presented. (LEW)

1981-09-01T23:59:59.000Z

469

Treatment of Wastewater from Mineral Processing by using Algae.  

E-Print Network (OSTI)

??Nowadays, the utilisation of algae in industrial processes to produce useful compounds or to treat waste streams is of great interest. Industrial wastewaters such as… (more)

Sprock, Stefan

2013-01-01T23:59:59.000Z

470

Isotope Geochemistry Of Minerals And Fluids From Newberry Volcano, Oregon |  

Open Energy Info (EERE)

Isotope Geochemistry Of Minerals And Fluids From Newberry Volcano, Oregon Isotope Geochemistry Of Minerals And Fluids From Newberry Volcano, Oregon Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Isotope Geochemistry Of Minerals And Fluids From Newberry Volcano, Oregon Details Activities (2) Areas (1) Regions (0) Abstract: Isotopic compositions were determined for hydrothermal quartz, calcite, and siderite from core samples of the Newberry 2 drill hole, Oregon. The Δ15O values for these minerals decrease with increasing temperatures. The values indicate that these hydrothermal minerals precipitated in isotopic equilibrium with water currently present in the reservoirs. The Δ18O values of quartz and calcite from the andesite and basalt flows (700-932 m) have isotopic values which require that the equilibrated water Δ18O values increase slightly (- 11.3 to -9.2‰) with

471

Epithermal Gold Mineralization and a Geothermal Resource at Blue Mountain,  

Open Energy Info (EERE)

Epithermal Gold Mineralization and a Geothermal Resource at Blue Mountain, Epithermal Gold Mineralization and a Geothermal Resource at Blue Mountain, Humboldt County, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Epithermal Gold Mineralization and a Geothermal Resource at Blue Mountain, Humboldt County, Nevada Abstract Shallow exploration drilling on the west flank of Blue Mountain discovered sub economic gold mineralization and a spatially associated active geothermal system. The gold mineralization is an unusual example of an acid sulfate type epithermal system developed in pre Tertiary sedimentary host rocks. The geothermal system is largely unexplored but is unusual in that surface manifestation s typically associated with active geothermal system are not present. Authors Andrew J. Parr and Timothy J. Percival

472

Hydrothermal alteration mineral mapping using hyperspectral imagery in  

Open Energy Info (EERE)

alteration mineral mapping using hyperspectral imagery in alteration mineral mapping using hyperspectral imagery in Dixie Valley, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Hydrothermal alteration mineral mapping using hyperspectral imagery in Dixie Valley, Nevada Abstract Hyperspectral (HyMap) data was used to map the location ofoutcrops of high temperature, hydrothermally alterated minerals(including alunite, pyrophyllite, and hematite) along a 15 kmswath of the eastern front of the Stillwater Mountain Range inDixie Valley, Nevada. Analysis of this data set reveals that severaloutcrops of these altered minerals exist in the area, and thatone outcrop, roughly 1 square kilometer in area, shows abundanthigh temperature alteration. Structural analysis of the alteredregion using a

473

Mineral Leasing Act of 1920 | Open Energy Information  

Open Energy Info (EERE)

Leasing Act of 1920 Leasing Act of 1920 Jump to: navigation, search Statute Name Mineral Leasing Act of 1920 Year 1920 Url MineralLeasingAct.jpg Description The Mineral Leasing Act established the authority of the Secretary of the Interior to oversee oil and gas operations on federal land. References Federal Oil and Gas Statutes[1] Mineral Leasing Act of 1920 (30 U.S.C. § 181 et seq.) - The Mineral Leasing Act established the authority of the Secretary of the Interior to oversee oil and gas operations on federal land. "The Secretary of the Interior is authorized to prescribe necessary and proper rules and regulations and to do any and all things necessary to carry out and accomplish the purposes of this Act." 30 U.S.C. § 189 References ↑ "Federal Oil and Gas Statutes"

474

Oxygen And Carbon Isotope Ratios Of Hydrothermal Minerals From Yellowstone  

Open Energy Info (EERE)

Oxygen And Carbon Isotope Ratios Of Hydrothermal Minerals From Yellowstone Oxygen And Carbon Isotope Ratios Of Hydrothermal Minerals From Yellowstone Drill Cores Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Oxygen And Carbon Isotope Ratios Of Hydrothermal Minerals From Yellowstone Drill Cores Details Activities (3) Areas (1) Regions (0) Abstract: Oxygen and carbon isotope ratios were measured for hydrothermal minerals (silica, clay and calcite) from fractures and vugs in altered rhyolite, located between 28 and 129 m below surface (in situ temperatures ranging from 81 to 199°C) in Yellowstone drill holes. The purpose of this study was to investigate the mechanism of formation of these minerals. The Δ18O values of the thirty-two analyzed silica samples (quartz, chalcedony, α-cristobalite, and β-cristobalite) range from -7.5 to +2.8‰. About one

475

Cementation process for minerals recovery from Salton Sea geothermal brines  

DOE Green Energy (OSTI)

The potential for minerals recovery from a 1000-MWe combined geothermal power and minerals recovery plant in the Salton Sea is examined. While the possible value of minerals recovered would substantially exceed the revenue from power production, information is insufficient to carry out a detailed economic analysis. The recovery of precious metals - silver, gold, and platinum - is the most important factor in determining the economics of a minerals recovery plant; however, the precious metals content of the brines is not certain. Such a power plant could recover 14 to 31% of the US demand for manganese and substantial amounts of zinc and lead. Previous work on minerals extraction from Salton Sea brines is also reviewed and a new process, based on a fluidized-bed cementation reaction with metallic iron, is proposed. This process would recover the precious metals, lead, and tin present in the brines.

Maimoni, A.

1982-01-26T23:59:59.000Z

476

NETL: Industrial Capture & Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 Technologies Industrial Capture & Storage Area 1 Large-Scale Industrial CCS Program The United States Department of Energy, National Energy Technology Laboratory (DOE/NETL, or DOE) is currently implementing a program titled "Carbon Capture and Sequestration from Industrial Sources and Innovative Concepts for Beneficial CO2 Use." This CO2 Capture and Sequestration (CCS) and CO2 use program is a cost-shared collaboration between the Government and industry whose purpose is to increase investment in clean industrial technologies and sequestration projects. In accordance with the American Recovery and Reinvestment Act of 2009, and Section 703 of Public Law 110-140, DOE's two specific objectives are to demonstrate: (1) Large-Scale Industrial CCS projects from industrial sources, and (2) Innovative Concepts for beneficial CO2 use.

477

Evaluating the DSM Potential for Industrial Electrotechnologies and Management Practices  

E-Print Network (OSTI)

In an effort to help balance load requirements and generating capacity, Houston Lighting & Power Company (HL&P) contracted with SRI International (SRI) to identify existing and emerging electrotechnologies and management practices (technologies) for possible inclusion in an industrial demand side management (DSM) program. This paper outlines the procedures used to evaluate technologies that may impact oil refining, pulp & paper production, and 26 major chemical processes of industrial customers within HL&P's service area. Each technology was reviewed with regard to its electricity requirements and applicability to various industries. In addition, each technology's basic principles, existing industrial applications, possible new applications, product or process limitations, and representative economics were investigated. Where applicable, concerns other than economic attractiveness such as environmental issues, worker safety, and product quality were identified. Additional information was also obtained from preliminary efforts to project the commercial penetration of each of these technologies. Factors affecting commercial penetration include the existing level of market penetration, fuel prices, electricity prices, capital investment requirements, perceived risk, and internal hurdles rates for investment. In order to fully determine which of these technologies should be included in an industrial DSM program, various HL&P industrial customers were interviewed with regard to their knowledge and/or acceptance levels of selected electrotechnologies and management practices. This enabled HL&P to better understand the specific needs of industrial customers within their service area. This survey data, along with the information provided by SRI and other sources, formed the basis for initial selection of technologies to include in an industrial DSM program. The value of encouraging HL&P's industrial customers to use any of these technologies will be compared to DSM programs for other customer classes, as well as more traditional generating resource options, before the final selection of electrotechnologies and management practices is made.

Harrell, P. J.; Pavone, A.

1991-06-01T23:59:59.000Z

478

NSLS Industrial User Program | Synchrotron Techniques  

NLE Websites -- All DOE Office Websites (Extended Search)

NSLS Industrial Users' Program Industry Home | Synchrotron Techniques | Battery Lab | Science Highlights | Industrial Program Coordinator | Publications Battery Lab NSLS users are...

479

Emerging energy-efficient industrial technologies  

E-Print Network (OSTI)

Performance for Industrial Refrigeration Systems. ” M.Sc.the performance of industrial refrigeration systems. SystemIndustrial Technologies Cooling and Storage (Food-4) Refrigeration

2000-01-01T23:59:59.000Z

480

Litigation in Argentina: challenging the tobacco industry.  

E-Print Network (OSTI)

Profits over people: Tobacco Industry Activities to MarketBarnoya J, Glantz S. Tobacco industry success in preventingL. Implications of the tobacco industry documents for public

Flores, M L; Barnoya, J; Mejia, R; Alderete, E; Pérez-Stable, E J

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "minerals industry surveys" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Emerging energy-efficient technologies for industry  

E-Print Network (OSTI)

Efficient Technologies for Industry Ernst Worrell Staff20036, USA ABSTRACT U.S. industry consumes approximately 37%efficient technologies for industry, focusing on over 50

2004-01-01T23:59:59.000Z

482

Federal Energy Management Program: Industrial Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Facilities to someone by E-mail Share Federal Energy Management Program: Industrial Facilities on Facebook Tweet about Federal Energy Management Program: Industrial...

483

Industrial Partnerships - Oak Ridge National Laboratory | ORNL  

Industrial Partnerships Overview. ORNL takes great pride in its work with U.S. industry, both large and small. Each year, the Industrial Partnerships team hosts more ...

484

Industrial Energy Efficiency and Climate Change Mitigation  

E-Print Network (OSTI)

and Paper n Other Industries, Electricity Conservation s65% of electricity consumed by industry is used by motorof the main industries include electricity savings. q

Worrell, Ernst

2009-01-01T23:59:59.000Z

485

Case Study of the California Cement Industry  

E-Print Network (OSTI)

2 compares cement industry electricity and natural gas useTable 2. Cement Industry Electricity and Natural GasFigure 2. Cement Industry End Use Electricity Consumption

Coito, Fred; Powell, Frank; Worrell, Ernst; Price, Lynn; Friedmann, Rafael

2005-01-01T23:59:59.000Z

486

Industrial Energy Audit Guidebook: Guidelines for Conducting...  

Open Energy Info (EERE)

Industrial Energy Audit Guidebook: Guidelines for Conducting an Energy Audit in Industrial Facilities Jump to: navigation, search Name Industrial Energy Audit Guidebook: Guidelines...

487

Definition: Airborne Gravity Survey | Open Energy Information  

Open Energy Info (EERE)

Survey Jump to: navigation, search Dictionary.png Airborne Gravity Survey Airborne gravity gradiometry (AGG) surveys provide information regarding the mass distribution of the...

488

2010 State Laboratory Program Workload Survey  

Science Conference Proceedings (OSTI)

Page 1. 2010 State Laboratory Program Workload Survey 2010 SLP Survey v.1.00 August 17, 2011 Page 2. SLP Survey 2010 - Page 2 of 122 ...

2011-08-24T23:59:59.000Z

489

2002 Manufacturing Energy Consumption Survey - User Needs Survey  

U.S. Energy Information Administration (EIA) Indexed Site

2002 Manufacturing Energy Consumption Survey: User-Needs Survey 2002 Manufacturing Energy Consumption Survey: User-Needs Survey View current results. We need your help in designing the next “ Energy Consumption Survey” (MECS)! As our valued customer, you are in an important position to tell us what kinds of data are most useful in helping you understand energy consumption in the U.S. manufacturing sector. Below is a short electronic survey with just a few questions. We will stop collecting responses for user feedback on May 17, 2002. This deadline serves to meet our intended release date of April/May 2003 for fielding MECS2002. The MECS is designed to produce estimates of energy consumption and other energy-related activities in manufacturing. The survey also collects information on energy expenditures, average prices, onsite generation of

490

Energy Flow Models for the Steel Industry  

E-Print Network (OSTI)

Energy patterns in the U. S. steel industry are examined using several models. First is an end-use model based on data in the 1994 Manufacturing Energy Consumption Survey (MECS). Then a seven-step process model is presented and material flow through each step is calibrated against Commerce Dept. data. Third, a detailed energy flow model is presented for coke ovens and blast furnaces, two very energy-intensive steps in our seven step model of steelmaking. This process-step model is calibrated against both our energy end use and material flow models. These models can serve as the base case for simulating changes in energy utilization and waste streams for steelmaking spurred by economic or regulatory conditions or technology innovations.

Hyman, B.; Andersen, J. P.

1998-04-01T23:59:59.000Z

491

Probabilistic neural networks applied to mineral potential mapping for platinum group elements in the Serra Leste region, Carajás Mineral Province, Brazil  

Science Conference Proceedings (OSTI)

This work presents an application of probabilistic neural networks to map the potential for platinum group elements (PGE) mineralization sites in the northeast portion of the Carajas Mineral Province (CMP), Brazilian Amazon. Geological and geophysical ... Keywords: Carajás Mineral Province, Leave-one-out test, Mineral potential mapping, Probabilistic neural network

Emilson Pereira Leite; Carlos Roberto de Souza Filho

2009-03-01T23:59:59.000Z

492

Industrial Geospatial Analysis Tool for Energy Evaluation (IGATE-E)  

Science Conference Proceedings (OSTI)

IGATE-E is an energy analysis tool for industrial energy evaluation. The tool applies statistical modeling to multiple publicly available datasets and provides information at the geospatial resolution of zip code using bottom up approaches. Within each zip code, the current version of the tool estimates electrical energy consumption of manufacturing industries based on each type of industries using DOE s Industrial Assessment Center database (IAC-DB) and DOE s Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition to other commercially available databases such as the Manufacturing News database (MNI, Inc.). Ongoing and future work include adding modules for the predictions of fuel energy consumption streams, manufacturing process steps energy consumption, major energy intensive processes (EIPs) within each industry type among other metrics of interest. The tool provides validation against DOE s EIA-MECS state level energy estimations and permits several statistical examinations. IGATE-E is intended to be a decision support and planning tool to a wide spectrum of energy analysts, researchers, government organizations, private consultants, industry partners, and alike.

Alkadi, Nasr E [ORNL; Starke, Michael R [ORNL; Ma, Ookie [DOE EERE; Nimbalkar, Sachin U [ORNL; Cox, Daryl [ORNL

2013-01-01T23:59:59.000Z

493

Manufacturing Energy Consumption Survey (MECS) - Data - U.S. Energy  

U.S. Energy Information Administration (EIA) Indexed Site

6 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive 6 MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive Data Methodology & Forms 2006 Data Tables Revision notice (November 2009): Tables 1.1, 1.2, 2.1, 2.2, 3.1, 3.2, 3.5, 4.1 and 4.2 have been slightly revised due to further editing. The revisions in XLS are indicated with a value of "R" in an adjacent column. In the PDF versions, the revised values are superscripted with an "R". No further revisions are anticipated for these tables. all tables + EXPAND ALL Consumption of Energy for All Purposes (First Use) Values RSE Table 1.1 By Mfg. Industry & Region (physical units) XLS PDF XLS Table 1.2 By Mfg. Industry & Region (trillion Btu) XLS PDF XLS Table 1.3 By Value of Shipments & Employment Size Category & Region XLS PDF XLS

494

The estimation of the number of underground coal miners and the annual dose to coal miners in China  

Science Conference Proceedings (OSTI)

This paper introduces an estimation method for the number of underground coal miners and the annual dose to coal miners in China. It shows that there are about 6 million underground miners at present and the proportion is about 1, 1 and 4 million for national key coal mines, state-owned local coal mines, and township and private-ownership coal mines, respectively. The collective dose is about 1.65 X 10{sup 4} person-Sv y{sup -1}, of which township and private-ownership coal mines contribute about 91%. This paper also points out that the 2000 UNSCEAR report gives the number of miners of coal production and their collective dose, which are underestimated greatly because the report only includes the number of underground miners in national key coal mines, which only accounts for 1/6 of the workers all working under the best ventilation conditions in China.

Liu, F.D.; Pan, Z.Q.; Liu, S.L.; Chen, L.; Ma, J.Z.; Yang, M.L.; Wang, N.P. [China Institute of Atomic Energy, Beijing (China)

2007-08-15T23:59:59.000Z

495

Chemically Accelerated Carbon Mineralization: Chemical and Biological Catalytic Enhancement of Weathering of Silicate Minerals as Novel Carbon Capture and Storage  

SciTech Connect

IMPACCT Project: Columbia University is developing a process to pull CO2 out of the exhaust gas of coal-fired power plants and turn it into a solid that can be easily and safely transported, stored above ground, or integrated into value-added products (e.g. paper filler, plastic filler, construction materials, etc.). In nature, the reaction of CO2 with various minerals over long periods of time will yield a solid carbonate—this process is known as carbon mineralization. The use of carbon mineralization as a CO2 capture and storage method is limited by the speeds at which these minerals can be dissolved and CO2 can be hydrated. To facilitate this, Columbia University is using a unique process and a combination of chemical catalysts which increase the mineral dissolution rate, and the enzymatic catalyst carbonic anhydrase which speeds up the hydration of CO2.

2010-07-01T23:59:59.000Z

496

Energy Department Develops Tool with Industry to Help Utilities Strengthen  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Develops Tool with Industry to Help Utilities Develops Tool with Industry to Help Utilities Strengthen Their Cybersecurity Capabilities Energy Department Develops Tool with Industry to Help Utilities Strengthen Their Cybersecurity Capabilities June 28, 2012 - 10:24am Addthis News Media Contact (202) 586-4940 WASHINGTON -- As part of the Obama Administration's commitment to protecting America's critical energy infrastructure, U.S. Energy Secretary Steven Chu today announced the release of a new Cybersecurity Self-Evaluation Survey Tool for utilities that will strengthen protection of the nation's electric grid from cybersecurity threats. Today's announcement is part of a broader White House initiative to develop a Cybersecurity Capability Maturity Model for the electricity sector, which aims to support the private sector and utilities nationwide in determining

497

Comparison of National Programs for Industrial Energy Efficiency: Industry Brief  

Science Conference Proceedings (OSTI)

This report looks at the Better Buildings, Better Plants program from the Department of Energy; E3, an initiative of five U.S. federal agencies; ENERGY STAR for Industry from the Environmental Protection Agency; and Superior Energy Performance, a product of the U.S. Council for Energy-Efficient Manufacturing. By comparing the goals of several energy-efficiency programs that have been established to support industry, this report hopes to help industrial facilities find the right fit for their own ...

2013-02-25T23:59:59.000Z

498

Research Projects in Industrial Technology.  

Science Conference Proceedings (OSTI)

The purpose of this booklet is to briefly describe ongoing and completed projects being carried out by Bonneville Power Administration's (BPA) Industrial Technology Section. In the Pacific Northwest, the industrial sector is the largest of the four consuming sectors. It accounted for thirty-nine percent of the total firm demand in the region in 1987. It is not easy to asses the conservation potential in the industrial sector. Recognizing this, the Northwest Power Planning Council established an objective to gain information on the size, cost, and availability of the conservation resource in the