National Library of Energy BETA

Sample records for millstream heights apartments

  1. APART

    Energy Science and Technology Software Center (OSTI)

    002662MLTPL00 Automated Pre-processing for NMR Assignments with Reduced Tedium http://sir.lanl.gov/APART.htm

  2. Earth-sheltered apartments

    SciTech Connect (OSTI)

    Germer, J.

    1984-12-01

    Earth-sheltered apartments for students at St. Johns University, Collegeville, MN are described. The intent was to provide energy-efficient, low maintenance housing in a neighborhood environment for the students. Students would learn about energy-conscious architecture from living in the buildings. The buildings have had few problems, but energy performance has not been up to expectations. The consumption of electricity exceeded predictions by 49%. The most likely answer to the problem is deviation from design. Several items of energy-efficient design were specified but deleted in order to cut costs.

  3. Indoor-Outdoor Air Leakage of Apartments and Commercial Buildings

    SciTech Connect (OSTI)

    Price, P.N.; Shehabi, A.; Chan, R.W.; Gadgil, A.J.

    2006-06-01

    We compiled and analyzed available data concerning indoor-outdoor air leakage rates and building leakiness parameters for commercial buildings and apartments. We analyzed the data, and reviewed the related literature, to determine the current state of knowledge of the statistical distribution of air exchange rates and related parameters for California buildings, and to identify significant gaps in the current knowledge and data. Very few data were found from California buildings, so we compiled data from other states and some other countries. Even when data from other developed countries were included, data were sparse and few conclusive statements were possible. Little systematic variation in building leakage with construction type, building activity type, height, size, or location within the u.s. was observed. Commercial buildings and apartments seem to be about twice as leaky as single-family houses, per unit of building envelope area. Although further work collecting and analyzing leakage data might be useful, we suggest that a more important issue may be the transport of pollutants between units in apartments and mixed-use buildings, an under-studied phenomenon that may expose occupants to high levels of pollutants such as tobacco smoke or dry cleaning fumes.

  4. Klamath Apartment Buildings (13) Space Heating Low Temperature...

    Open Energy Info (EERE)

    (13) Space Heating Low Temperature Geothermal Facility Facility Klamath Apartment Buildings (13) Sector Geothermal energy Type Space Heating Location Klamath Falls, Oregon...

  5. Apartment Hunting with an Eye to Energy Savings: Part I

    Broader source: Energy.gov [DOE]

    Apartment hunting can be a long and stressful process. Finding that right place is difficult, let alone finding the right place with the right price.

  6. Building America Case Study: Conway Street Apartments, Greenfield...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Name: Conway Street Apartments: A Multifamily Deep ... America program is engineering the American home for ... LIGHTING, APPLIANCES, AND WATER HEATING * Solar thermal ...

  7. Title: Ames Blue Alert- Wood Cabinet Falls Apart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ames Blue Alert- Wood Cabinet Falls Apart Lessons Learned Statement- Cumulative damage can cause a loss of structural integrity. When furnishings are repeatedly exposed to water,...

  8. Apartment Hunting – Part II- Keeping those Energy Bills Down

    Broader source: Energy.gov [DOE]

    In the second of two entries on apartment hunting, I discuss things to look for that might help keep your energy bills low.

  9. Ventilation and occupant behavior in two apartment buildings

    SciTech Connect (OSTI)

    Diamond, R.C.; Modera, M.P.; Feustel, H.E.

    1986-10-01

    In this paper we approach the subject of ventilation and occupant behavior in multifamily buildings by asking three questions: (1) why and how do occupants interact with ventilation in an apartment building, (2) how does the physical environment (i.e., building characteristics and climate) affect the ventilation in an apartment, and (3) what methods can be used to answer the first two questions. To investigate these and related questions, two apartment buildings in Chicago were monitored during the 1985-1986 heating season. In addition to collecting data on energy consumption, outdoor temperature, wind speed, and indoor apartment temperatures, we conducted diagnostic measurements and occupant surveys in both buildings. The diagnostic tests measured leakage areas of the individual apartments, both through the exterior envelope and to other apartments. The measured leakage areas are used in conjunction with a multizone air flow model to simulate infiltration and internal air flows under different weather conditions. The occupants were questioned about their attitudes and behavior regarding the comfort, air quality, ventilation, and energy use of their apartments. This paper describes each of the research methods utilized, the results of these efforts, and conclusions that can be drawn about ventilation-occupant interactions in these apartment buildings. We found that there was minimal window opening during the winter, widespread use of auxiliary heating to control thermal comfort, and that the simulations show little outside air entry in the top-floor apartments during periods of low wind speeds. The major conclusion of this work is that a multi-disciplinary approach is required to understand or predict occupant-ventilation interactions. Such an approach must take into account the physical characteristics of the building and the climate, as well as the preferences and available options of the occupants.

  10. PULSE HEIGHT ANALYZER

    DOE Patents [OSTI]

    Goldsworthy, W.W.

    1958-06-01

    A differential pulse-height discriminator circuit is described which is readily adaptable for operation in a single-channel pulse-height analyzer. The novel aspect of the circuit lies in the specific arrangement of differential pulse-height discriminator which includes two pulse-height discriminators having a comnnon input and an anticoincidence circuit having two interconnected vacuum tubes with a common cathode resistor. Pulses from the output of one discriminator circuit are delayed and coupled to the grid of one of the anticoincidence tubes by a resistor. The output pulses from the other discriminator circuit are coupled through a cathode follower circuit, which has a cathode resistor of such value as to provide a long time constant with the interelectrode capacitance of the tube, to lenthen the output pulses. The pulses are then fed to the grid of the other anticoincidence tube. With such connections of the circuits, only when the incoming pulse has a pesk value between the operating levels of the two discriminators does an output pulse occur from the anticoincidence circuit.

  11. How Do You Save Energy in Your Apartment or Rental?

    Broader source: Energy.gov [DOE]

    It's not always easy to find ways to save when you don't own your home, but there are simple things you can do to make your apartment or rental more comfortable and efficient.

  12. Building America Technology Solutions for New and Existing Homes: Apartment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compartmentalization with an Aerosol-Based Sealing Process | Department of Energy Apartment Compartmentalization with an Aerosol-Based Sealing Process Building America Technology Solutions for New and Existing Homes: Apartment Compartmentalization with an Aerosol-Based Sealing Process In this study, the Consortium for Advanced Residential Buildings team demonstrated the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant developed by the

  13. Apartment Compartmentalization With an Aerosol-Based Sealing Process

    SciTech Connect (OSTI)

    Maxwell, Sean; Berger, David; Harrington, Curtis

    2015-03-01

    The U.S. Department of Energy Building America Team, Consortium for Advanced Residential Buildings, sought to demonstrate this new technology application in a new construction multifamily building in Queens, New York. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before-and-after sealing, point-source testing of individual leaks, and pressure measurements in the walls of an apartment during sealing.

  14. DIFFERENTIAL PULSE HEIGHT DISCRIMINATOR

    DOE Patents [OSTI]

    Test, L.D.

    1958-11-11

    Pulse-height discriminators are described, specifically a differential pulse-height discriminator which is adapted to respond to pulses of a band of amplitudes, but to reject pulses of amplitudes greater or less than tbe preselected band. In general, the discriminator includes a vacuum tube having a plurality of grids adapted to cut off plate current in the tube upon the application of sufficient negative voltage. One grid is held below cutoff, while a positive pulse proportional to the amplltude of each pulse is applled to this grid. Another grid has a negative pulse proportional to the amplitude of each pulse simultaneously applied to it. With this arrangement the tube will only pass pulses which are of sufficlent amplitude to counter the cutoff bias but not of sufficlent amplitude to cutoff the tube.

  15. EIS-0050-S: Commercial and Apartment Conservation Service Program, Supplemental

    Broader source: Energy.gov [DOE]

    The Office of Buildings Energy Research and Development prepared this SEIS to analyze the potential environmental impacts resulting from national implementation of the Commercial and Apartment Conservation Service Program. This SEIS is a supplement to DOE/EIS-0050, Residential Conservation Service Program.

  16. Method for fabricating a substrate having spaced apart microcapillaries thereon

    DOE Patents [OSTI]

    Jarvis, E.E.

    1995-01-24

    Methods are disclosed for manufacturing a self-supporting substrate having a plurality of spaced-apart needles (spikes or microcapillaries) projecting upwardly from a major surface of the substrate. In a preferred method, metal is deposited onto a porous membrane such that the metal extends into the pores, after which the membrane is dissolved. 9 figures.

  17. PULSE HEIGHT ANALYZER

    DOE Patents [OSTI]

    Johnstone, C.W.

    1958-01-21

    An anticoincidence device is described for a pair of adjacent channels of a multi-channel pulse height analyzer for preventing the lower channel from generating a count pulse in response to an input pulse when the input pulse has sufficient magnitude to reach the upper level channel. The anticoincidence circuit comprises a window amplifier, upper and lower level discriminators, and a biased-off amplifier. The output of the window amplifier is coupled to the inputs of the discriminators, the output of the upper level discriminator is connected to the resistance end of a series R-C network, the output of the lower level discriminator is coupled to the capacitance end of the R-C network, and the grid of the biased-off amplifier is coupled to the junction of the R-C network. In operation each discriminator produces a negative pulse output when the input pulse traverses its voltage setting. As a result of the connections to the R-C network, a trigger pulse will be sent to the biased-off amplifier when the incoming pulse level is sufficient to trigger only the lower level discriminator.

  18. Apartment Compartmentalization With an Aerosol-Based Sealing Process

    SciTech Connect (OSTI)

    Maxwell, S.; Berger, D.; Harrington, C.

    2015-03-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. The innovation demonstrated under this research study was the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant, developed by the Western Cooling Efficiency Center at University of California Davis. CARB sought to demonstrate this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing.

  19. Indoor Environmental Quality Benefits of Apartment Energy Retrofits

    SciTech Connect (OSTI)

    Noris, Federico; Adamkiewicz, Gary; Delp, William W.; Hotchi, Toshifumi; Russell, Marion; Singer, Brett C.; Spears, Michael; Vermeer, Kimberly; Fisk, William J.

    2013-06-01

    Sixteen apartments serving low-income populations in three buildings were retrofit with the goal of simultaneously reducing energy consumption and improving indoor environmental quality (IEQ). Retrofit measures varied among apartments and included, among others, envelope sealing, installation of continuous mechanical ventilation systems, upgrading bathroom fans and range hoods, attic insulation, replacement of heating and cooling systems, and adding wall-mounted particle air cleaners. IEQ parameters were measured, generally for two one-week periods before and after the retrofits. The measurements indicate an overall improvement in IEQ conditions after the retrofits. Comfort conditions, bathroom humidity, and concentrations of carbon dioxide, acetaldehyde, volatile organic compounds, and particles generally improved. Formaldehyde and nitrogen dioxide levels decreased in the building with the highest concentrations, were unchanged in a second building, and increased in a third building. IEQ parameters other than particles improved more in apartments with continuous mechanical ventilation systems installed. In general, but not consistently, larger percent increases in air exchange rates were associated with larger percent decreases in indoor levels of the pollutants that primarily come from indoor sources.

  20. ITP Industrial Distributed Energy: Boa Vista Apartments: New Bedford Housing Authority/ New Bedford, MA

    Broader source: Energy.gov [DOE]

    Overview of Boa Vista Apartments housing development, with CHP system to provide electricity and hot water.

  1. Newporter Apartments: Deep Energy Retrofit Short-Term Results

    SciTech Connect (OSTI)

    Gordon, A.; Howard, L.; Kunkle, R.; Lubliner, M.; Auer, D.; Clegg, Z.

    2012-12-01

    This project demonstrates a path to meet the goal of the Building America program to reduce home energy use by 30% in multi-family buildings. The project demonstrates cost effective energy savings targets as well as improved comfort and indoor environmental quality (IEQ) associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort. The project focuses on a typical 1960's vintage low-rise multi-family apartment community (120 units in three buildings).

  2. Newporter Apartments. Deep Energy Retrofit Short Term Results

    SciTech Connect (OSTI)

    Gordon, Andrew; Howard, Luke; Kunkle, Rick; Lubliner, Michael; Auer, Dan; Clegg, Zach

    2012-12-01

    This project demonstrates a path to meet the goal of the Building America program to reduce home energy use by 30% in multi-family buildings. The project demonstrates cost-effective energy savings targets as well as improved comfort and indoor environmental quality (IEQ) associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort. The project focuses on a typical 1960’s vintage low-rise multi-family apartment community (120 units in three buildings).

  3. West Village Student Housing Phase I: Apartment Monitoring and Evaluation

    SciTech Connect (OSTI)

    German, A.; Bell, C.; Dakin, B.; Hoeschele, M.

    2014-06-01

    Building America team Alliance for Residential Building Innovation (ARBI) worked with the University of California, Davis (UC Davis) and the developer partner West Village Community Partnership (WVCP) to evaluate performance on 192 student apartments completed in September, 2011 as part of Phase I of the multi-purpose West Village project. West Village, the largest planned zero net energy community in the United States. The campus neighborhood is designed to enable faculty, staff and students to affordably live near campus, take advantage of environmentally friendly transportation options, and participate fully in campus life. The aggressive energy efficiency measures that are incorporated in the design contribute to source energy reductions of 37% over the B10 Benchmark. The energy efficiency measures that are incorporated into these apartments include increased wall & attic insulation, high performance windows, high efficiency heat pumps for heating and cooling, central heat pump water heaters (HPWHs), 100% high efficacy lighting, and ENERGY STAR major appliances. Results discuss how measured energy use compares to modeling estimates over a 10 month monitoring period and includes a cost effective evaluation.

  4. 01-02-2008 - Wood Cabinet Falls Apart | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 - Wood Cabinet Falls Apart Document Number: NA Effective Date: 012008 File (public): PDF icon 01-02-2008blue...

  5. West Village Student Housing Phase I: Apartment Monitoring and Evaluation

    SciTech Connect (OSTI)

    German, A.; Bell, C.; Dakin, B.; Hoeschele, M.

    2014-06-01

    Building America team Alliance for Residential Building Innovation (ARBI) worked with the University of California, Davis and the developer partner West Village Community Partnership (WVCP) to evaluate performance on 192 student apartments completed in September, 2011 as part of Phase I of the multi-purpose West Village project. West Village is the largest planned zero net energy community in the United States. The campus neighborhood is designed to enable faculty, staff, and students to affordably live near campus, take advantage of environmentally friendly transportation options, and participate fully in campus life. The aggressive energy efficiency measures that are incorporated in the design contribute to source energy reductions of 37% over the B10 Benchmark. These measures include increased wall and attic insulation, high performance windows, high efficiency heat pumps for heating and cooling, central heat pump water heaters (HPWHs), 100% high efficacy lighting, and ENERGY STAR major appliances. The report discusses how measured energy use compares to modeling estimates over a 10-month monitoring period and includes a cost effective evaluation.

  6. Idaho Site D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demolition Project | Department of Energy D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in Demolition Project Idaho Site D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in Demolition Project November 25, 2015 - 12:05pm Addthis A worker employs a thermal lance to cut apart a massive tank so it can be removed from a building slated for demolition at the Idaho Site's Materials and Fuels Complex. A worker employs a thermal lance to cut apart a massive tank so it can

  7. MULTICHANNEL PULSE-HEIGHT ANALYZER

    DOE Patents [OSTI]

    Russell, J.T.; Lefevre, H.W.

    1958-01-21

    This patent deals with electronic computing circuits and more particularly to pulse-height analyzers used for classifying variable amplitude pulses into groups of different amplitudes. The device accomplishes this pulse allocation by by converting the pulses into frequencies corresponding to the amplitudes of the pulses, which frequencies are filtered in channels individually pretuned to a particular frequency and then detected and recorded in the responsive channel. This circuit substantially overcomes the disadvantages of prior annlyzers incorporating discriminators pre-set to respond to certain voltage levels, since small variation in component values is not as critical to satisfactory circuit operation.

  8. Estimating vehicle height using homographic projections

    DOE Patents [OSTI]

    Cunningham, Mark F; Fabris, Lorenzo; Gee, Timothy F; Ghebretati, Jr., Frezghi H; Goddard, James S; Karnowski, Thomas P; Ziock, Klaus-peter

    2013-07-16

    Multiple homography transformations corresponding to different heights are generated in the field of view. A group of salient points within a common estimated height range is identified in a time series of video images of a moving object. Inter-salient point distances are measured for the group of salient points under the multiple homography transformations corresponding to the different heights. Variations in the inter-salient point distances under the multiple homography transformations are compared. The height of the group of salient points is estimated to be the height corresponding to the homography transformation that minimizes the variations.

  9. Protocol for maximizing energy savings and indoor environmental quality improvements when retrofitting apartments

    SciTech Connect (OSTI)

    Noris, Federico; Delp, William W.; Vermeer, Kimberly; Adamkiewicz, Gary; Singer, Brett C.; Fisk, William J.

    2013-06-01

    The current focus on building energy retrofit provides an opportunity to simultaneously improve indoor environmental quality (IEQ). Toward this end, we developed a protocol for selecting packages of retrofits that both save energy and improve IEQ in apartments. The protocol specifies the methodology for selecting retrofits from a candidate list while addressing expected energy savings, IEQ impacts, and costs in an integrated manner. Interviews, inspections and measurements are specified to collect the needed input information. The protocol was applied to 17 apartments in three buildings in two different climates within California. Diagnostic measurements and surveys conducted before and after retrofit implementation indicate enhanced apartment performance.

  10. Table HC1.1.4 Housing Unit Characteristics by Average Floorspace--Apartments, 2

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Housing Unit Characteristics by Average Floorspace--Apartments, 2005" ,,,"Average Square Feet per Apartment in a --" ," Housing Units (millions)" ,,,"2 to 4 Unit Building",,,"5 or More Unit Building" ,,"Apartments (millions)" "Housing Unit Characteristics",,,"Total","Heated","Cooled","Total","Heated","Cooled" "Total",111.1,24.5,1090,902,341,872,780,441

  11. Table HC1.2.4 Living Space Characteristics by Average Floorspace--Apartments, 2

    U.S. Energy Information Administration (EIA) Indexed Site

    2.4 Living Space Characteristics by Average Floorspace--Apartments, 2005" ,,,"Average Square Feet per Apartment in a --" ," Housing Units (millions)" ,,,"2 to 4 Unit Building",,,"5 or More Unit Building" ,,"Apartments (millions)" "Living Space Characteristics",,,"Total","Heated","Cooled","Total","Heated","Cooled" "Total",111.1,24.5,1090,902,341,872,780,441

  12. Protocol for Maximizing Energy Savings and Indoor Environmental Quality Improvements when Retrofitting Apartments

    SciTech Connect (OSTI)

    Noris, Federico; Delp, William W.; Vermeer, Kimberly; Adamkiewicz, Gary; Singer, Brett C.; Fis, William J.

    2012-06-18

    The current focus on building energy retrofit provides an opportunity to simultaneously improve indoor environmental quality (IEQ). Toward this end, we developed a protocol for selecting packages of retrofits that both save energy and improve IEQ in apartments. The protocol specifies the methodology for selecting retrofits from a candidate list while addressing expected energy savings, IEQ impacts, and costs in an integrated manner. Interviews, inspections and measurements are specified to collect the needed input information. The protocol was applied to 17 apartments in three buildings in two different climates within California. Diagnostic measurements and surveys conducted before and after retrofit implementation indicate enhanced apartment performance.

  13. ARM - Measurement - Planetary boundary layer height

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govMeasurementsPlanetary boundary layer height ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Planetary boundary layer height Top of the planetary boundary layer; also known as depth or height of the mixing layer. Categories Atmospheric State Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each

  14. Raman lidar/AERI PBL Height Product

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Ferrare, Richard

    2012-12-14

    Planetary Boundary Layer (PBL) heights have been computed using potential temperature profiles derived from Raman lidar and AERI measurements. Raman lidar measurements of the rotational Raman scattering from nitrogen and oxygen are used to derive vertical profiles of potential temperature. AERI measurements of downwelling radiance are used in a physical retrieval approach (Smith et al. 1999, Feltz et al. 1998) to derive profiles of temperature and water vapor. The Raman lidar and AERI potential temperature profiles are merged to create a single potential temperature profile for computing PBL heights. PBL heights were derived from these merged potential temperature profiles using a modified Heffter (1980) technique that was tailored to the SGP site (Della Monache et al., 2004). PBL heights were computed on an hourly basis for the period January 1, 2009 through December 31, 2011. These heights are provided as meters above ground level.

  15. Raman lidar/AERI PBL Height Product

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Ferrare, Richard

    Planetary Boundary Layer (PBL) heights have been computed using potential temperature profiles derived from Raman lidar and AERI measurements. Raman lidar measurements of the rotational Raman scattering from nitrogen and oxygen are used to derive vertical profiles of potential temperature. AERI measurements of downwelling radiance are used in a physical retrieval approach (Smith et al. 1999, Feltz et al. 1998) to derive profiles of temperature and water vapor. The Raman lidar and AERI potential temperature profiles are merged to create a single potential temperature profile for computing PBL heights. PBL heights were derived from these merged potential temperature profiles using a modified Heffter (1980) technique that was tailored to the SGP site (Della Monache et al., 2004). PBL heights were computed on an hourly basis for the period January 1, 2009 through December 31, 2011. These heights are provided as meters above ground level.

  16. Saving money with energy conservation: an energy audit workbook for apartment buildings

    SciTech Connect (OSTI)

    Not Available

    1980-07-01

    Part 1 of this booklet lists 14 ideas with high potential for savings. Part 2 is a list of ideas intended for the apartment renter. Part 3 contains more ideas for management which require little or no initial investment and offer significant savings. Part 4 has even more ways to save but with some investment. Following these idea sections, Part 5 contains four forms to help manage an energy conservation program. Part 5 also has two examples to show how the dollar savings potential of the various ideas can be estimated. This workbook provides a do-it-yourself, fill-in-the blanks approach to an energy conservation program for apartments.

  17. Technology Solutions Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process

    SciTech Connect (OSTI)

    2015-07-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. This research study by Building America team Consortium for Advanced Residential Buildings demonstrated the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant developed by the Western Cooling Efficiency Center at University of California Davis. CARB demonstrated this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.

  18. Existing Whole-House Solutions Case Study: Conway Street Apartments - Greenfield, Massachusetts

    SciTech Connect (OSTI)

    2014-12-01

    Through recent research efforts, CARB has been evaluating strategies and technologies that can make dramatic improvements in energy performance in multifamily buildings. In this project, the team helped to transform a 100-year-old empty school building into 12 high performance apartments with low energy costs. The advanced features included an excellent thermal envelope of closed-cell spray foam and triple-pane windows, ductless heat pumps, solar thermal hot water system, and photovoltaic system.

  19. Wind Turbine Scaling Enables Projects to Reach New Heights |...

    Broader source: Energy.gov (indexed) [DOE]

    chapter that focuses on trends in wind turbine nameplate capacity, hub height, rotor ... chapter that focuses on trends in wind turbine nameplate capacity, hub height, rotor ...

  20. MULTI-CHANNEL PULSE HEIGHT ANALYZER

    DOE Patents [OSTI]

    Boyer, K.; Johnstone, C.W.

    1958-11-25

    An improved multi-channel pulse height analyzer of the type where the device translates the amplitude of each pulse into a time duration electrical quantity which is utilized to control the length of a train of pulses forwarded to a scaler is described. The final state of the scaler for any one train of pulses selects the appropriate channel in a magnetic memory in which an additional count of one is placed. The improvement consists of a storage feature for storing a signal pulse so that in many instances when two signal pulses occur in rapid succession, the second pulse is preserved and processed at a later time.

  1. Monitoring of the performance of a solar heated and cooled apartment building. Final report

    SciTech Connect (OSTI)

    Vliet, G.C.; Srubar, R.L.

    1980-03-01

    An all-electric apartment building in Texas was retrofitted for solar heating and cooling and hot water. The system consists of an array of 1280 square feet of Northrup concentrating tracking collectors, a 5000-gallon hot water storage vessel, a 500-gallon chilled water storage vessel, a 25-ton Arkla Industries absorption chiller, and a two-pipe hydronic air conditioning system. The solar air conditioning equipment is installed in parallel with the existing conventional electric heating and cooling system, and the solar domestic water heating serves as preheat to the existing electric water heaters. The system was fully instrumented for monitoring. Detailed descriptions are given of the solar system, the performance monitoring system, and the data reduction processes. Results are presented and discussed. (WHK)

  2. Property:Maximum Wave Height(m) | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Property Name Maximum Wave Height(m) Property Type String Pages using the property "Maximum Wave Height(m)" Showing 25 pages using this property....

  3. A new technique to measure tunneling barrier height in solid...

    Office of Scientific and Technical Information (OSTI)

    A new technique to measure tunneling barrier height in solid media Citation Details In-Document Search Title: A new technique to measure tunneling barrier height in solid media ...

  4. University Heights, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    University Heights, Ohio: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 41.4978306, -81.5373456 Show Map Loading map... "minzoom":false,"mapp...

  5. Alamo Heights, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Alamo Heights, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 29.4849531, -98.4658502 Show Map Loading map... "minzoom":false,"mappings...

  6. Barker Heights, North Carolina: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Barker Heights, North Carolina: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.3112279, -82.444008 Show Map Loading map......

  7. East Richmond Heights, California: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Richmond Heights, California: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 37.944924, -122.3135811 Show Map Loading map......

  8. NREL: Wind Research - New Wind Resource Maps Reach Higher Heights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    capacity map at a 140-meter hub height. Photo courtesy of WINDExchange August 11, 2015 The National Renewable Energy Laboratory and AWS Truepower LLC recently released maps...

  9. Huber Heights, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    by expanding it. Huber Heights is a city in Greene County and Miami County and Montgomery County, Ohio. It falls under Ohio's 8th congressional district.12 References ...

  10. Drexel Heights, Arizona: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Drexel Heights, Arizona: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 32.1411888, -111.028427 Show Map Loading map... "minzoom":false,"mappi...

  11. Microscopic Description of Nuclear Fission: Fission Barrier Heights...

    Office of Scientific and Technical Information (OSTI)

    Conference: Microscopic Description of Nuclear Fission: Fission Barrier Heights of Even-Even Actinides Citation Details In-Document Search Title: Microscopic Description of Nuclear ...

  12. Ben Avon Heights, Pennsylvania: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Avon Heights, Pennsylvania: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 40.5136795, -80.0731112 Show Map Loading map......

  13. ARM - PI Product - Raman lidar/AERI PBL Height Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsRaman lidar/AERI PBL Height Product ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Raman lidar/AERI PBL Height Product Planetary Boundary Layer (PBL) heights have been computed using potential temperature profiles derived from Raman lidar and AERI measurements. Raman lidar measurements of the rotational Raman scattering from nitrogen and oxygen are used to derive vertical profiles of potential

  14. Wind Turbine Inspection Technology Reaches New Heights | GE Global...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wind Turbine Inspection Technology Reaches New Heights Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new ...

  15. Vadnais Heights, Minnesota: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    article is a stub. You can help OpenEI by expanding it. Vadnais Heights is a city in Ramsey County, Minnesota. It falls under Minnesota's 4th congressional district.12...

  16. Windsor Heights, Iowa: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    article is a stub. You can help OpenEI by expanding it. Windsor Heights is a city in Polk County, Iowa. It falls under Iowa's 3rd congressional district.12 References US...

  17. San Antonio Heights, California: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. San Antonio Heights is a census-designated place in San Bernardino County, California.1...

  18. Codes for Unfolding Activation Detector Data and Pulse Height Spectra.

    Energy Science and Technology Software Center (OSTI)

    1980-01-30

    Version 00 ITER-2 includes two versions of the ITER code; these are ITERAD and ITERMS. ITER-2 was previously used for unfolding data from neutron activation detectors; it is now capable, also, of unfolding pulse height spectra.

  19. Perry Heights, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Perry Heights is a census-designated place in Stark County, Ohio.1 References US...

  20. Richmond Heights, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Richmond Heights is a census-designated place in Miami-Dade County, Florida.1 References ...

  1. Property:Building/InteriorHeight | Open Energy Information

    Open Energy Info (EERE)

    InteriorHeight" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 3.5 + Sweden Building 05K0002 + 3 + Sweden Building 05K0003 + 3 +...

  2. Federal Heights, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    article is a stub. You can help OpenEI by expanding it. Federal Heights is a city in Adams County, Colorado. It falls under Colorado's 2nd congressional district.12...

  3. Maple Heights-Lake Desire, Washington: Energy Resources | Open...

    Open Energy Info (EERE)

    help OpenEI by expanding it. Maple Heights-Lake Desire is a census-designated place in King County, Washington.1 References US Census Bureau 2005 Place to 2006 CBSA...

  4. Porter Heights, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Porter Heights is a census-designated place in Montgomery County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  5. Control of bed height in a fluidized bed gasification system

    DOE Patents [OSTI]

    Mehta, Gautam I.; Rogers, Lynn M.

    1983-12-20

    In a fluidized bed apparatus a method for controlling the height of the fdized bed, taking into account variations in the density of the bed. The method comprises taking simultaneous differential pressure measurements at different vertical elevations within the vessel, averaging the differential pressures, determining an average fluidized bed density, then periodically calculating a weighting factor. The weighting factor is used in the determination of the actual bed height which is used in controlling the fluidizing means.

  6. DOE Taking Wind Forecasting to New Heights | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Taking Wind Forecasting to New Heights DOE Taking Wind Forecasting to New Heights May 18, 2015 - 3:24pm Addthis A 2013 study conducted for the U.S. Department of Energy (DOE) by the National Oceanic and Atmospheric Administration (NOAA), AWS Truepower, and WindLogics in the Great Plains and Western Texas, demonstrated that wind power forecasts can be improved substantially using data collected from tall towers, remote sensors, and other devices, and incorporated into improved forecasting models

  7. 'Data Deluge' Pushes Mass Spec Imaging to New Heights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    'Data Deluge' Pushes Mass Spec Imaging to New Heights 'Data Deluge' Pushes Mass Spec Imaging to New Heights MANTISSA Team Takes Novel Approach to Improve Experimental Data Analysis July 15, 2015 Contact: Kathy Kincade, +1 510 495 2124, kkincade@lbl.gov MANTISSA Ion-intensity visualization of the 20 most important ions in a mouse brain segment selected by the CX/CUR algorithm. Of the 20 ions, little redundancy is present, pointing to the effectiveness of the CX approach for information

  8. Critical Question #4: What are the Best Off-the-Shelf HVAC Solutions for Low-Load, High-Performance Homes and Apartments?

    Broader source: Energy.gov [DOE]

    What is currently in the market? What are the limitations of these systems? What are the desired specifications for these systems? What are the realistic space conditioning loads of these high-performance homes and apartments?

  9. ARM: X-SAPR Range Height Indicator scan (Dataset) | Data Explorer

    Office of Scientific and Technical Information (OSTI)

    Data Explorer Search Results ARM: X-SAPR Range Height Indicator scan Title: ARM: X-SAPR Range Height Indicator scan X-SAPR Range Height Indicator scan Authors: Widener, Kevin ; ...

  10. Building Height-Characteristics in Three U.S. Cities

    SciTech Connect (OSTI)

    Burian, S. J.; Brown, M. J.; Velugubantla, S. P.

    2002-01-01

    Urban canopy parameterizations have been used to represent urban effects in numerical models of mesoscale meteorology, the surface energy budget, and pollutant dispersion. The urban canopy parameterization accounts for the drag exerted by urban roughness elements, the enhancement of turbulent kinetic energy, and the alteration of the surface energy budget (Brown 2000). Accurate representation of urban effects in numerical simulations requires the determination of urban morphological parameters, including building height statistics. Computer analysis of 3-D building digital datasets can provide details of the urban environment in an efficient manner. Ratti ut al. (2001) describe a method for obtaining urban canopy parameters from digital imagery using image processing techniques, Burian et al. (2002) present an alternative analysis approach using a geographic information system (GIS). In this paper, building height statistics computed for three U.S. cities following the GIS approach are presented.

  11. Limiting Factors for Convective Cloud Top Height in the Tropics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Limiting Factors for Convective Cloud Top Height in the Tropics M. P. Jensen and A. D. Del Genio National Aeronautics and Space Administration Goddard Institute for Space Studies Columbia University New York, New York Introduction Populations of tropical convective clouds are mainly comprised of three types: shallow trade cumulus, mid-level cumulus congestus and deep convective clouds (Johnson et al. 1999). Each of these cloud types has different impacts on the local radiation and water budgets.

  12. Process for preparing schottky diode contacts with predetermined barrier heights

    DOE Patents [OSTI]

    Chang, Y. Austin; Jan, Chia-Hong; Chen, Chia-Ping

    1996-01-01

    A process is provided for producing a Schottky diode having a preselected barrier height .phi..sub.Bn. The substrate is preferably n-GaAs, the metallic contact is derived from a starting alloy of the Formula [.SIGMA.M.sub..delta. ](Al.sub.x Ga.sub.1-x) wherein: .SIGMA.M is a moiety which consists of at least one M, and when more than one M is present, each M is different, M is a Group VIII metal selected from the group consisting of nickel, cobalt, ruthenium, rhodium, indium and platinum, .delta. is a stoichiometric coefficient whose total value in any given .SIGMA.M moiety is 1, and x is a positive number between 0 and 1 (that is, x ranges from greater than 0 to less than 1). Also, the starting alloy is capable of forming with the substrate a two phase equilibrium reciprocal system of the binary alloy mixture [.SIGMA.M.sub..delta. ]Ga-[.SIGMA.M.sub..delta. ]Al-AlAs-GaAs. When members of an alloy subclass within this Formula are each preliminarily correlated with the barrier height .phi..sub.Bn of a contact producable therewith, then Schottky diodes of predetermined barrier heights are producable by sputtering and annealing. Further provided are the product Schottky diodes that are produced according to this process.

  13. Plant community composition and vegetation height, Barrow, Alaska, Ver. 1

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Sloan, Victoria; Norby, Richard; Siegrist, Julia; Iversen, Colleen; Brooks, Jonathan; Liebig, Jennifer; Wood, Sarah

    This dataset contains i) the results of field surveys of plant community composition and vegetation height made between 17th and 29th July 2012 in 48, 1 x 1 m plots located in areas A-D of Intensive Site 1 at the Next-Generation Ecosystem Experiments (NGEE) Arctic site near Barrow, Alaska and ii) results of a mapping exercise undertaken in August 2013 using two perpendicular transects across each polygon containing vegetation plots to determine the boundaries of vegetation communities described in 2012.

  14. Plant community composition and vegetation height, Barrow, Alaska, Ver. 1

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Sloan, Victoria; Norby, Richard; Siegrist, Julia; Iversen, Colleen; Brooks, Jonathan; Liebig, Jennifer; Wood, Sarah

    2014-04-25

    This dataset contains i) the results of field surveys of plant community composition and vegetation height made between 17th and 29th July 2012 in 48, 1 x 1 m plots located in areas A-D of Intensive Site 1 at the Next-Generation Ecosystem Experiments (NGEE) Arctic site near Barrow, Alaska and ii) results of a mapping exercise undertaken in August 2013 using two perpendicular transects across each polygon containing vegetation plots to determine the boundaries of vegetation communities described in 2012.

  15. Building America Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process - Queens, NY; Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect (OSTI)

    2015-07-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. The innovation demonstrated under this research study was the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant, developed by the Western Cooling Efficiency Center at University of California Davis.
    CARB sought to demonstrate this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.

  16. EIS-0505: Vantage to Pomona Heights 230 kV Transmission Line...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: Vantage to Pomona Heights 230 kV Transmission Line Project; Yakima, Grant, Benton, and Kittitas Counties, Washington EIS-0505: Vantage to Pomona Heights 230 kV Transmission Line ...

  17. Property:Maximum Wave Height(m) at Wave Period(s) | Open Energy...

    Open Energy Info (EERE)

    at Wave Period(s) Jump to: navigation, search Property Name Maximum Wave Height(m) at Wave Period(s) Property Type String Pages using the property "Maximum Wave Height(m) at Wave...

  18. 23 V.S.A. Section 1431 Height and Width Limits | Open Energy...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: 23 V.S.A. Section 1431 Height and Width LimitsLegal Abstract Limits for the height and width...

  19. Dilution calculations for determining laboratory exhaust stack heights

    SciTech Connect (OSTI)

    Ratcliff, M.A.; Sandru, E.

    1999-07-01

    Laboratory exhaust stacks should be designed with sufficient height and exit momentum to avoid re-entry of exhaust and possible air quality problems, and the design should be evaluated before construction. One evaluation method is presented in this paper that combines dilution prediction equations from the 1997 ASHRAE Handbook--Fundamentals (1997) and a dilution criteria of Halitsky (1988). This method is less conservative than a geometric method in the ASHRAE Handbook and is less costly than wind-tunnel modeling. The method should only be applied to relatively simple building geometries with no larger buildings adjacent to them. A planned change to the ASHRAE equations, which would result in larger stacks being necessary, is discussed. Further investigation of this change is recommended using comparisons to wind tunnel data.

  20. The physics and chemistry of the Schottky barrier height

    SciTech Connect (OSTI)

    Tung, Raymond T.

    2014-03-15

    The formation of the Schottky barrier height (SBH) is a complex problem because of the dependence of the SBH on the atomic structure of the metal-semiconductor (MS) interface. Existing models of the SBH are too simple to realistically treat the chemistry exhibited at MS interfaces. This article points out, through examination of available experimental and theoretical results, that a comprehensive, quantum-mechanics-based picture of SBH formation can already be constructed, although no simple equations can emerge, which are applicable for all MS interfaces. Important concepts and principles in physics and chemistry that govern the formation of the SBH are described in detail, from which the experimental and theoretical results for individual MS interfaces can be understood. Strategies used and results obtained from recent investigations to systematically modify the SBH are also examined from the perspective of the physical and chemical principles of the MS interface.

  1. Indium Growth and Island Height Control on Si Submonolayer Phases

    SciTech Connect (OSTI)

    Chen, Jizhou

    2009-05-09

    wave length of 13.4nm so it can curve on the surface of an sample to make structure as small as the order of 10nm. however, lithograph usually causes permanent damages to the surface and in many cases the QDs are damaged during the lithograph and therefore result in high percentage of defects. Quantum size effect has attracted more and more interests in surface science due to many of its effects. One of its effects is the height preference in film growing and the resulting possibility of uniformly sized self-assemble nanostructure. The experiment of Pb islands on In 4x1 phase shows that both the height and the width can be controlled by proper growth conditions, which expands the growth dimensions from 1 to 2. This discover leads us to study the In/Pb interface. In Ch.3, we found that the Pb islands growing on In 4x1-Si(111) surface which have uniform height due to QSE and uniform width due to the constriction of In 4x1 lattice have unexpected stability. These islands are stable in even RT, unlike usual nanostructures on Pb/Si surface which are stable only at low temperature. Since similar structures are usually grown at low temperature, this discovery makes the grown structures closer to technological applications. It also shows the unusual of In/Pb interface. Then we studied the In islands grown on Pb-{alpha}-{radical}3x{radical}3-Si(111) phase in Ch.4. These islands have fcc structure in the first few layers, and then convert to bct structure. The In fcc islands have sharp height preference due to QSE like Pb islands. However, the preferred height is different (7 layer for Pb on Si 7x7 and 4 layer for Pb on In 4x1), due to the difference of interface. The In islands structure prefers to be bct than fcc with coverage increase. It is quantitatively supported by first-principle calculation. Unexpectedly, the In islands grown on various of In interfaces didn't show QSE effects and phase transition from fcc and bct structures as on the Pb-{alpha} interface (Ch.6). In g

  2. Cascade Apartments - Deep Energy Multifamily Retrofit , Kent, Washington (Fact Sheet), Building America Case Study: Whole-House Solutions for New Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cascade Apartments - Deep Energy Multifamily Retrofit Kent, Washington PROJECT INFORMATION Construction: Retrofit Type: Multifamily, affordable Builder: King County Housing Authority, Kent, Washington http://www.kcha.org/ Size: 108 units in 27 four-plexes Rent: 30% of household income Date completed: 2010 Climate Zone: Marine PERFORMANCE DATA State low-income weatherization investment: $385,850 for all 108 units $15,850 per 4-plex $3,858 per unit Site savings per unit: Billing analysis:

  3. Systems and methods that generate height map models for efficient three dimensional reconstruction from depth information

    DOE Patents [OSTI]

    Frahm, Jan-Michael; Pollefeys, Marc Andre Leon; Gallup, David Robert

    2015-12-08

    Methods of generating a three dimensional representation of an object in a reference plane from a depth map including distances from a reference point to pixels in an image of the object taken from a reference point. Weights are assigned to respective voxels in a three dimensional grid along rays extending from the reference point through the pixels in the image based on the distances in the depth map from the reference point to the respective pixels, and a height map including an array of height values in the reference plane is formed based on the assigned weights. An n-layer height map may be constructed by generating a probabilistic occupancy grid for the voxels and forming an n-dimensional height map comprising an array of layer height values in the reference plane based on the probabilistic occupancy grid.

  4. On the influence of shrub height and expansion on boreal climate...

    Office of Scientific and Technical Information (OSTI)

    Title: On the influence of shrub height and expansion on boreal climate Authors: Bonfils, C ; Phillips, T ; Lawrence, D ; Cameron-Smith, P ; Riley, W ; Subin, Z Publication Date: ...

  5. EIS-0505: Vantage to Pomona Heights 230 kV Transmission Line...

    Energy Savers [EERE]

    BPA's proposed action is to interconnect the proposed transmission line to an existing BPA substation. EIS-0505: Vantage to Pomona Heights 230 kV Transmission Line Project Public ...

  6. Comparison of Cloud Top Height and Optical Depth Histograms from ISCCP,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MISR, and MODIS Comparison of Cloud Top Height and Optical Depth Histograms from ISCCP, MISR, and MODIS Marchand, Roger Pacific Northwest National Laboratory Ackerman, Thomas Pacific Northwest National Laboratory Category: Cloud Properties Joint histograms of Cloud Top Height (CTH) and Optical Depth (OD) derived by the International Satellite Cloud Climatology Project (ISCCP) are being widely used by the climate modeling community in evaluating global climate models. Similar joint histograms

  7. ARM: ARSCL: cloud base height from first Clothiaux algorithms on Vaisala or Belfort ceilometers, Micropulse lidar, and MMCR

    SciTech Connect (OSTI)

    Karen Johnson; Michael Jensen

    1996-11-08

    ARSCL: cloud base height from first Clothiaux algorithms on Vaisala or Belfort ceilometers, Micropulse lidar, and MMCR

  8. ARM: ARSCL: cloud base height from first Clothiaux algorithms on Vaisala or Belfort ceilometers, Micropulse lidar, and MMCR

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Karen Johnson; Michael Jensen

    ARSCL: cloud base height from first Clothiaux algorithms on Vaisala or Belfort ceilometers, Micropulse lidar, and MMCR

  9. Determination of the Schottky barrier height of ferromagnetic contacts to few-layer phosphorene

    SciTech Connect (OSTI)

    Anugrah, Yoska; Robbins, Matthew C.; Koester, Steven J.; Crowell, Paul A.

    2015-03-09

    Phosphorene, the 2D analogue of black phosphorus, is a promising material for studying spin transport due to its low spin-orbit coupling and its ½ nuclear spin, which could allow the study of hyperfine effects. In this work, the properties of permalloy (Py) and cobalt (Co) contacts to few-layer phosphorene are presented. The Schottky barrier height was extracted and determined as a function of gate bias. Flat-band barrier heights, relative to the valence band edge, of 110 meV and 200 meV were determined for Py and Co, respectively. These results are important for future studies of spin transport in phosphorene.

  10. Effect of habitat and foraging height on bat activity in the coastal plain of South Carolina.

    SciTech Connect (OSTI)

    Menzel, Jennifer, M.; Menzel, Michael A.; Kilgo, John C.; Ford, W. Mark; Edwards, John W.; McCracken, Gary F.

    2005-07-01

    A comparison of bat activity levels in the Coastal Plain of South Carolina among 5 habitat types: forested riparian areas, clearcuts, young pine plantations, mature pine plantations and pine savannas, using time expansion radio-microphones and integrated detectors to simultaneously monitor bat activity at three heights in each habitat type.

  11. Estimation of the mixing layer height over a high altitude site in Central Himalayan region by using Doppler lidar

    SciTech Connect (OSTI)

    Shukla, K. K.; Phanikumar, D. V.; Newsom, Rob K.; Kumar, Niranjan; Ratnam, Venkat; Naja, M.; Singh, Narendra

    2014-03-01

    A Doppler lidar was installed at Manora Peak, Nainital (29.4 N; 79.2 E, 1958 amsl) to estimate mixing layer height for the first time by using vertical velocity variance as basic measurement parameter for the period September-November 2011. Mixing layer height is found to be located ~0.57 +/- 0.1and 0.45 +/- 0.05km AGL during day and nighttime, respectively. The estimation of mixing layer height shows good correlation (R>0.8) between different instruments and with different methods. Our results show that wavelet co-variance transform is a robust method for mixing layer height estimation.

  12. Chamberlain Heights Redevelopment: A Large Scale, Cold Climate Study of Affordable Housing Retrofits

    SciTech Connect (OSTI)

    Donnelly, K.; Mahle, M.

    2012-03-01

    The City of Meriden Housing Authority (MHA) collaborated with affordable housing developer Jonathon Rose Companies (JRC) to complete a gut renovation of 124 residential units in the Chamberlain Heights retrofit project. The affordable housing community is made up of 36 buildings in duplex and quad configurations located on 22 acres within two miles of downtown Meriden, CT. The final post-retrofit analysis showed 40%-45% source energy savings over the existing pre-retrofit conditions.

  13. Chamberlain Heights Redevelopment: A Large Scale, Cold Climate Study of Affordable Housing Retrofits

    SciTech Connect (OSTI)

    Donnelly, K.; Mahle, M.

    2012-03-01

    The City of Meriden Housing Authority (MHA) collaborated with affordable housing developer Jonathon Rose Companies (JRC) to complete a gut renovation of 124 residential units in the Chamberlain Heights retrofit project. The affordable housing community is made up of 36 buildings in duplex and quad configurations located on 22 acres within two miles of downtown Meriden, CT. The final post-retrofit analysis showed 40-45% source energy savings over the existing pre-retrofit conditions.

  14. Estimating Three-Dimensional Cloudy Radiative Transfer Effects from Time-Height Cross Sections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Estimating Three-Dimensional Cloudy Radiative Transfer Effects from Time-Height Cross Sections C. Hannay and R. Pincus National Oceanic and Atmospheric Administration Climate Diagnostics Center Boulder, Colorado K. F. Evans Program in Atmospheric and Oceanic Sciences University of Colorado Boulder, Colorado Introduction Clouds in the atmosphere are finite in extent and variable in every direction and in time. Long data sets from ground-based profilers, such as lidars or cloud radars, could

  15. Very low Schottky barrier height at carbon nanotube and silicon carbide interface

    SciTech Connect (OSTI)

    Inaba, Masafumi Suzuki, Kazuma; Shibuya, Megumi; Lee, Chih-Yu; Masuda, Yoshiho; Tomatsu, Naoya; Norimatsu, Wataru; Kusunoki, Michiko; Hiraiwa, Atsushi; Kawarada, Hiroshi

    2015-03-23

    Electrical contacts to silicon carbide with low contact resistivity and high current durability are crucial for future SiC power devices, especially miniaturized vertical-type devices. A carbon nanotube (CNT) forest formed by silicon carbide (SiC) decomposition is a densely packed forest, and is ideal for use as a heat-dissipative ohmic contact in SiC power transistors. The contact resistivity and Schottky barrier height in a Ti/CNT/SiC system with various SiC dopant concentrations were evaluated in this study. Contact resistivity was evaluated in relation to contact area. The Schottky barrier height was calculated from the contact resistivity. As a result, the Ti/CNT/SiC contact resistivity at a dopant concentration of 3??10{sup 18?}cm{sup ?3} was estimated to be ?1.3??10{sup ?4} ??cm{sup 2} and the Schottky barrier height of the CNT/SiC contact was in the range of 0.400.45?eV. The resistivity is relatively low for SiC contacts, showing that CNTs have the potential to be a good ohmic contact material for SiC power electronic devices.

  16. Could crop height affect the wind resource at agriculturally productive wind farm sites?

    SciTech Connect (OSTI)

    Vanderwende, Brian; Lundquist, Julie K.

    2015-11-07

    The collocation of cropland and wind turbines in the US Midwest region introduces complex meteorological interactions that could influence both agriculture and wind-power production. Crop management practices may affect the wind resource through alterations of land-surface properties. We use the weather research and forecasting (WRF) model to estimate the impact of crop height variations on the wind resource in the presence of a large turbine array. A hypothetical wind farm consisting of 121 1.8-MW turbines is represented using the WRF model wind-farm parametrization. We represent the impact of selecting soybeans rather than maize by altering the aerodynamic roughness length in a region approximately 65 times larger than that occupied by the turbine array. Roughness lengths of 0.1 and 0.25 m represent the mature soy crop and a mature maize crop, respectively. In all but the most stable atmospheric conditions, statistically significant hub-height wind-speed increases and rotor-layer wind-shear reductions result from switching from maize to soybeans. Based on simulations for the entire month of August 2013, wind-farm energy output increases by 14 %, which would yield a significant monetary gain. Further investigation is required to determine the optimal size, shape, and crop height of the roughness modification to maximize the economic benefit and minimize the cost of such crop-management practices. As a result, these considerations must be balanced by other influences on crop choice such as soil requirements and commodity prices.

  17. Could crop height affect the wind resource at agriculturally productive wind farm sites?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Vanderwende, Brian; Lundquist, Julie K.

    2015-11-07

    The collocation of cropland and wind turbines in the US Midwest region introduces complex meteorological interactions that could influence both agriculture and wind-power production. Crop management practices may affect the wind resource through alterations of land-surface properties. We use the weather research and forecasting (WRF) model to estimate the impact of crop height variations on the wind resource in the presence of a large turbine array. A hypothetical wind farm consisting of 121 1.8-MW turbines is represented using the WRF model wind-farm parametrization. We represent the impact of selecting soybeans rather than maize by altering the aerodynamic roughness length inmore » a region approximately 65 times larger than that occupied by the turbine array. Roughness lengths of 0.1 and 0.25 m represent the mature soy crop and a mature maize crop, respectively. In all but the most stable atmospheric conditions, statistically significant hub-height wind-speed increases and rotor-layer wind-shear reductions result from switching from maize to soybeans. Based on simulations for the entire month of August 2013, wind-farm energy output increases by 14 %, which would yield a significant monetary gain. Further investigation is required to determine the optimal size, shape, and crop height of the roughness modification to maximize the economic benefit and minimize the cost of such crop-management practices. As a result, these considerations must be balanced by other influences on crop choice such as soil requirements and commodity prices.« less

  18. Genetic analysis of inflorescence and plant height components in sorghum (Panicoidae) and comparative genetics with rice (Oryzoidae)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Dong; Kong, Wenqian; Robertson, Jon; Goff, Valorie H.; Epps, Ethan; Kerr, Alexandra; Mills, Gabriel; Cromwell, Jay; Lugin, Yelena; Phillips, Christine; et al

    2015-04-19

    Domestication has played an important role in shaping characteristics of the inflorescence and plant height in cultivated cereals. Taking advantage of meta-analysis of QTLs, phylogenetic analyses in 502 diverse sorghum accessions, GWAS in a sorghum association panel (n = 354) and comparative data, we provide insight into the genetic basis of the domestication traits in sorghum and rice. We performed genome-wide association studies (GWAS) on 6 traits related to inflorescence morphology and 6 traits related to plant height in sorghum, comparing the genomic regions implicated in these traits by GWAS and QTL mapping, respectively. In a search for signatures ofmoreselection, we identify genomic regions that may contribute to sorghum domestication regarding plant height, flowering time and pericarp color. Comparative studies across taxa show functionally conserved hotspots in sorghum and rice for awn presence and pericarp color that do not appear to reflect corresponding single genes but may indicate co-regulated clusters of genes. We also reveal homoeologous regions retaining similar functions for plant height and flowering time since genome duplication an estimated 70 million years ago or more in a common ancestor of cereals. In most such homoeologous QTL pairs, only one QTL interval exhibits strong selection signals in modern sorghum. Intersections among QTL, GWAS and comparative data advance knowledge of genetic determinants of inflorescence and plant height components in sorghum, and add new dimensions to comparisons between sorghum and rice.less

  19. Genetic analysis of inflorescence and plant height components in sorghum (Panicoidae) and comparative genetics with rice (Oryzoidae)

    SciTech Connect (OSTI)

    Zhang, Dong; Kong, Wenqian; Robertson, Jon; Goff, Valorie H; Epps, Ethan; Kerr, Alexandra; Mills, Gabriel; Cromwell, Jay; Lugin, Yelena; Phillips, Christine; Paterson, Andrew H

    2015-12-01

    Domestication has played an important role in shaping characteristics of the inflorescence and plant height in cultivated cereals. Taking advantage of meta-analysis of QTLs, phylogenetic analyses in 502 diverse sorghum accessions, GWAS in a sorghum association panel (n = 354) and comparative data, we provide insight into the genetic basis of the domestication traits in sorghum and rice. We performed genome-wide association studies (GWAS) on 6 traits related to inflorescence morphology and 6 traits related to plant height in sorghum, comparing the genomic regions implicated in these traits by GWAS and QTL mapping, respectively. In a search for signatures of selection, we identify genomic regions that may contribute to sorghum domestication regarding plant height, flowering time and pericarp color. Comparative studies across taxa show functionally conserved ‘hotspots’ in sorghum and rice for awn presence and pericarp color that do not appear to reflect corresponding single genes but may indicate co-regulated clusters of genes. We also reveal homoeologous regions retaining similar functions for plant height and flowering time since genome duplication an estimated 70 million years ago or more in a common ancestor of cereals. In most such homoeologous QTL pairs, only one QTL interval exhibits strong selection signals in modern sorghum. Intersections among QTL, GWAS and comparative data advance knowledge of genetic determinants of inflorescence and plant height components in sorghum, and add new dimensions to comparisons between sorghum and rice.

  20. Genetic analysis of inflorescence and plant height components in sorghum (Panicoidae) and comparative genetics with rice (Oryzoidae)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Dong; Kong, Wenqian; Robertson, Jon; Goff, Valorie H; Epps, Ethan; Kerr, Alexandra; Mills, Gabriel; Cromwell, Jay; Lugin, Yelena; Phillips, Christine; et al

    2015-12-01

    Domestication has played an important role in shaping characteristics of the inflorescence and plant height in cultivated cereals. Taking advantage of meta-analysis of QTLs, phylogenetic analyses in 502 diverse sorghum accessions, GWAS in a sorghum association panel (n = 354) and comparative data, we provide insight into the genetic basis of the domestication traits in sorghum and rice. We performed genome-wide association studies (GWAS) on 6 traits related to inflorescence morphology and 6 traits related to plant height in sorghum, comparing the genomic regions implicated in these traits by GWAS and QTL mapping, respectively. In a search for signatures ofmore » selection, we identify genomic regions that may contribute to sorghum domestication regarding plant height, flowering time and pericarp color. Comparative studies across taxa show functionally conserved ‘hotspots’ in sorghum and rice for awn presence and pericarp color that do not appear to reflect corresponding single genes but may indicate co-regulated clusters of genes. We also reveal homoeologous regions retaining similar functions for plant height and flowering time since genome duplication an estimated 70 million years ago or more in a common ancestor of cereals. In most such homoeologous QTL pairs, only one QTL interval exhibits strong selection signals in modern sorghum. Intersections among QTL, GWAS and comparative data advance knowledge of genetic determinants of inflorescence and plant height components in sorghum, and add new dimensions to comparisons between sorghum and rice.« less

  1. Early Pennsylvanian wrenching along the Red River-Matador Arch: Formation of a pull-apart basin, Depocenter for Atokan to Lower Des Moines (bend) clastics, Cottle County, Texas

    SciTech Connect (OSTI)

    Stephens, W.C. Jr.; Gunn, R.D.

    1995-06-01

    Early Pennsylvanian wrenching along the Red River-Matador Arch (Tectonic Zone) created a braided series of en echelon faults and folds with associated pop-up structures and pull-apart basins. Local extension, or overstepping, in Southeast Cottle County, Texas, has produced the deepest pull-apart basin along the arch with over 10,000` of structural relief. The emerging Wichita-Amarillo Uplift, to the north, provided an abundant sediment source, which prograded rapidly southward as an alluvial fan-braided river complex. Exposure of basement rocks and lower Paleozoic sediments along the Red River-Matador Arch, also contributed to the basin fill. Syntectonic sedimentation led to the accumulation of over 6000` of Bend (Atoka-lower Des Moines) sediments within the basin. Deposition was dominated initially by alluvial fan to fluvial siliciclastics. As basin subsidence was further amplified by sediment loading, accommodation exceeded sedimentation capturing a large segment of the southward prograding Wichita-Amarillo derived clastic wedge. Encroachment of the late Atoka to lower Des Moines epeiric sea promoted further evolution of depositional environments to fan deltas, marine dominated clastics and, later, localized carbonate development. Type III kerogen rich organic shales produced abundant gas prone source rocks. The extreme depth of the basin combined with the local geothermal gradient provided for significant hydrocarbon generation. By early 1988 new well control helped revise previous stratigraphic correlation demonstrating a rapidly expanding lower Des Moines to Atokan section. The drilling of the Gunn Oil Company-Brothers No. 1 to a total depth of 10,301` in the Mississippian Chappel Limestone, encountered 2025` of Bend sediments, with 279` of gross Bend Conglomerate (162` of net pay). The Brothers No. 1 was potentialled on 11/19/89 with a CAOF of 6.0 MMCFD and filed as the field discovery for the Broken Bone (Bend Conglomerate) field.

  2. Reference Buildings by Building Type: Midrise Apartment

    Broader source: Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  3. Building America Case Study: Apartment Compartmentalization with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    These leaks are often easy to identify during a preliminary air leakage test, but they can be diffcult to address because of their complicated geometry. The aerosol process also ...

  4. Cascade Apartments: Deep Energy Multifamily Retrofit

    SciTech Connect (OSTI)

    Gordon, A.; Mattheis, L.; Kunkle, R.; Howard, L.; Lubliner, M.

    2014-02-01

    In December of 2009-10, King County Housing Authority (KCHA) implemented energy retrofit improvements in the Cascade multifamily community, located in Kent, Washington (marine climate.)This research effort involved significant coordination from stakeholders KCHA, WA State Department of Commerce, utility Puget Sound Energy, and Cascade tenants. This report focuses on the following three primary BA research questions: 1. What are the modeled energy savings using DOE low income weatherization approved TREAT software? 2. How did the modeled energy savings compare with measured energy savings from aggregate utility billing analysis? 3. What is the Savings to Investment Ratio (SIR) of the retrofit package after considering utility window incentives and KCHA capitol improvement funding.

  5. Cascade Apartments: Deep Energy Multifamily Retrofit

    SciTech Connect (OSTI)

    Gordon, A.; Mattheis, L.; Kunkle, R.; Howard, L.; Lubliner, M.

    2014-02-01

    In December of 2009-10, King County Housing Authority (KCHA) implemented energy retrofit improvements in the Cascade multifamily community, located in Kent, Washington (marine climate.)This research effort involved significant coordination from stakeholders KCHA, WA State Department of Commerce, utility Puget Sound Energy, and Cascade tenants. This report focuses on the following three primary BA research questions : 1. What are the modeled energy savings using DOE low income weatherization approved TREAT software? 2. How did the modeled energy savings compare with measured energy savings from aggregate utility billing analysis? 3. What is the Savings to Investment Ratio (SIR) of the retrofit package after considering utility window incentives and KCHA capitol improvement funding.

  6. Archived Reference Building Type: Midrise Apartment

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zonesis available for reference.Current versionsare also available.

  7. Archived Reference Building Type: Midrise Apartment

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  8. Experimental study of the influence of collector height on the steady state performance of a passive solar air heater

    SciTech Connect (OSTI)

    Ryan, D.; Burek, S.A.M.

    2010-09-15

    Passive solar air heaters, such as solar chimneys and Trombe Walls, rely on solar-induced buoyancy-driven (natural) convection to produce the flow of air. Although buoyancy-driven convection is well understood for a single vertical plate, buoyancy-driven convection in an asymmetrically-heated channel is more problematic, and in particular, the effects of the channel height on the flow rate and heat transfer. This paper reports on experiments on test rigs resembling lightweight passive solar air-heating collectors. The test rigs were of heights 0.5, 1.0 and 2.0 m, with adjustable channel depths (20-150 mm) and heat inputs (up to 1000 W/m{sup 2}). Measurements were made of the air, plate and cover temperatures, and air velocities. Results are presented as dimensionless correlations of mass flow (as Reynolds number) and efficiency against heat input (as Rayleigh number), channel depth and height. Thermal efficiency is shown to be a function of the heat input and the system height, but not of the channel depth; mass flow is shown to be a dependent on all three parameters. (author)

  9. The commanding heights of oil: Control over the International oil market

    SciTech Connect (OSTI)

    Krapels, E.N.

    1992-01-01

    The Commanding Heights of Oil is an analysis of oil's role in the international environment. It identifies the degree of control over oil in terms of what is asserted as the most important processes and factors that determine the condition of international affairs: (1) The state of oil demand in relation to the capacity to supply, with special emphasis on the amount of spare production capacity; (2) The nature of the business, and how the structure of the industry changes over time as companies cope with the risks peculiar to an extremely capital intensive enterprise; (3) The financial strength of the parties contending for control, including their ability to outlast their opponents in contests for influence over oil affairs; and (4) The nature of the mechanisms whereby the governments and companies strive to create a situation in which they do not have to rely on price to balance supply and demand. Each of the four central factors was prominent at every major turn of the international oil market over the decades. The dissertation argues that the international oil market was controlled in the past by first a group of companies, and, later, a group of countries, for a combination of reasons that is unlikely to be repeated. That does not mean that the 1990s will be spared oil price shocks such as occurred in the 1970s and 1980s. It does suggest that those shocks are unlikely to last long, that OPEC members are unlikely to be able to leverage their position in oil into larger positions in world affairs. It means that oil is unlikely to play as prominent a role in world affairs in the 1990s as it has in the past, even if oil demand, and along with it dependence on OPEC oil, rises.

  10. Schottky barrier height reduction for holes by Fermi level depinning using metal/nickel oxide/silicon contacts

    SciTech Connect (OSTI)

    Islam, Raisul, E-mail: raisul@stanford.edu; Shine, Gautam; Saraswat, Krishna C. [Department of Electrical Engineering, Stanford University, Stanford, California 94305 (United States)

    2014-11-03

    We report the experimental demonstration of Fermi level depinning using nickel oxide (NiO) as the insulator material in metal-insulator-semiconductor (M-I-S) contacts. Using this contact, we show less than 0.1?eV barrier height for holes in platinum/NiO/silicon (Pt/NiO/p-Si) contact. Overall, the pinning factor was improved from 0.08 (metal/Si) to 0.26 (metal/NiO/Si). The experimental results show good agreement with that obtained from theoretical calculation. NiO offers high conduction band offset and low valence band offset with Si. By reducing Schottky barrier height, this contact can be used as a carrier selective contact allowing hole transport but blocking electron transport, which is important for high efficiency in photonic applications such as photovoltaics and optical detectors.

  11. Annealing dependence of diamond-metal Schottky barrier heights probed by hard x-ray photoelectron spectroscopy

    SciTech Connect (OSTI)

    Gaowei, M.; Muller, E. M.; Rumaiz, A. K.; Weiland, C.; Cockayne, E.; Woicik, J. C.; Jordan-Sweet, J.; Smedley, J.

    2012-05-14

    Hard x-ray photoelectron spectroscopy was applied to investigate the diamond-metal Schottky barrier heights for several metals and diamond surface terminations. The position of the diamond valence-band maximum was determined by theoretically calculating the diamond density of states and applying cross section corrections. The diamond-platinum Schottky barrier height was lowered by 0.2 eV after thermal annealing, indicating annealing may increase carrier injection in diamond devices leading to photoconductive gain. The platinum contacts on oxygen-terminated diamond was found to provide a higher Schottky barrier and therefore a better blocking contact than that of the silver contact in diamond-based electronic devices.

  12. The Influence of Angiography Table Shields and Height on Patient and Angiographer Irradiation During Interventional Radiology Procedures

    SciTech Connect (OSTI)

    D'Othee, Bertrand Janne Lin, Pei-Jan Paul

    2007-06-15

    Purpose. To quantify the influence of angiography table height on patient and angiographer irradiation, as compared with other routine protective measures such as the use of protective shields hanging at the tableside and from the ceiling of angiography suites. Methods. An experimental study was carried out in which a phantom (substitute for a human body) placed on the angiography table was irradiated by pulsed fluoroscopy. Entrance exposure rates were measured at the phantom surface (surrogate of patient skin exposure by incident X-ray beam) and at 60 cm from the phantom (analog to angiographer skin exposure by scatter). Exposure rates were measured at levels corresponding to the knees, testes, waist, xyphoid appendix, shoulders, and eyes of an angiographer 178 cm tall. Measurements were repeated at angiography table heights of 85, 95, 105, and 110 cm from the floor, with and without protective shields. Results. Moving the table from its highest to lowest position increased by 32% the phantom entrance exposure but decreased scatter to the angiographer. Scatter to the angiographer could be reduced most by using the protective shields (30-105 times less), but low table heights provided relatively more important protection (412-1121 {mu}Sv/hr reduction, or 15-72% scatter reduction) when shields were not used (e.g., for unprotected regions of the angiographer's body such as the hands). Conclusion. Working at lower table heights provides a little additional protection to exposed body parts of angiographers, at the cost of somewhat higher patient exposure. Although small, this incremental protection could be clinically relevant in the long term. The choice of table position should be a compromise based on multiple factors, including at least patient exposure, scatter to angiographers, and angiographer comfort.

  13. Adequacy of Power-to-Mass Scaling in Simulating PWR Incident Transient for Reduced-Height, Reduced-Pressure and Full-Height, Full-Pressure Integral System Test Facilities

    SciTech Connect (OSTI)

    Liu, T.-J.; Lee, C.-H

    2004-03-15

    A complete scheme of scaling methods to design the reduced-height, reduced-pressure (RHRP) Institute of Nuclear Energy Research Integral System Test (IIST) facility and to specify test conditions for incident simulation was developed. In order to preserve core decay power history and coolant mass inventory during a transient, a unique power-to-mass scaling method is proposed and utilized for RHRP and full-height, full-pressure (FHFP) systems. To validate the current scaling method, three counterpart tests done at the IIST facility are compared with the FHFP tests in small-break loss-of-coolant, station blackout, and loss-of-feedwater accidents performed at the Large-Scale Test Facility (LSTF) and the BETHSY test facility. Although differences appeared in design, scaling, and operation conditions among the IIST, LSTF, and BETHSY test facilities, the important physical phenomena shown in the facilities are almost the same. The physics involved in incident transient phenomena are well measured and modeled by showing the common thermal-hydraulic behavior of key parameters and the general consistency of chronological events. The results also confirm the adequacy of power-to-mass scaling methodology.

  14. Evaluation of WRF predicted near hub-height winds and ramp events over a Pacific Northwest site with complex terrain

    SciTech Connect (OSTI)

    Yang, Qing; Berg, Larry K.; Pekour, Mikhail S.; Fast, Jerome D.; Newsom, Rob K.; Stoelinga, Mark; Finley, Cathy

    2013-08-16

    The WRF model version 3.3 is used to simulate near hub-height winds and power ramps utilizing three commonly used planetary boundary-layer (PBL) schemes: Mellor-Yamada-Janji? (MYJ), University of Washington (UW), and Yonsei University (YSU). The predicted winds have small mean biases compared with observations. Power ramps and step changes (changes within an hour) consistently show that the UW scheme performed better in predicting up ramps under stable conditions with higher prediction accuracy and capture rates. Both YSU and UW scheme show good performance predicting up- and down- ramps under unstable conditions with YSU being slightly better for ramp durations longer than an hour. MYJ is the most successful simulating down-ramps under stable conditions. The high wind speed and large shear associated with low-level jets are frequently associated with power ramps, and the biases in predicted low-level jet explain some of the shown differences in ramp predictions among different PBL schemes. Low-level jets were observed as low as ~200 m in altitude over the Columbia Basin Wind Energy Study (CBWES) site, located in an area of complex terrain. The shear, low-level peak wind speeds, as well as the height of maximum wind speed are not well predicted. Model simulations with 3 PBL schemes show the largest variability among them under stable conditions.

  15. A Bayesian inversion framework for yield and height-of-burst/depth-of-burial for near-surface explosions

    SciTech Connect (OSTI)

    Johannesson, Gardar; Bulaevskaya, Vera; Ramirez, Abe; Ford, Sean; Rodgers, Artie

    2015-09-07

    A Bayesian inversion framework is presented to estimate the yield of an explosion and height-of-burst/depth-of-burial (HOB/DOB) using seismic and air pressure data. This is accomplished by first calibrating the parameters in the forward models that relate the observations to the yield and HOB/DOB and then using the calibrated model to estimate yield and HOB/DOB associated with a new set of seismic and air pressure observations. The MCMC algorithms required to perform these steps are outlined, and the results with real data are shown. Finally, an extension is proposed for a case when clustering in the seismic displacement occurs as a function of different types of rock and other factors.

  16. Low resistance Ti Ohmic contacts to 4H-SiC by reducing barrier heights without high temperature annealing

    SciTech Connect (OSTI)

    Huang Lingqin; Liu Bingbing; Zhu Qiaozhi; Chen Suhua; Gao Mingchao; Wang Dejun; Qin Fuwen

    2012-06-25

    Ti Ohmic contacts to relatively highly doped (1 Multiplication-Sign 10{sup 18} cm{sup -3}) n-type 4H-SiC have been produced, without high temperature annealing, by means of low temperature electronic cyclotron resonance microwave hydrogen plasma pre-treatment (HPT) of the SiC surface. The as-deposited Ti/4H-SiC contacts show Ohmic properties, and the specific contact resistance obtained is as low as 2.07 Multiplication-Sign 10{sup -4}{Omega}{center_dot}cm{sup 2} after annealing at low temperatures (400 Degree-Sign C). This is achieved by low barrier height at Ti/SiC interface, which could be attributed to decrease of surface states density by the HPT releasing Fermi level pinning, and to band-gap narrowing, image-force, and thermionic-field emission at high doping.

  17. The Independence Heights House

    Broader source: Energy.gov (indexed) [DOE]

    1.7 Percentage of Population Below the Poverty Level 41.6% Houston- Demographics ... 1.2 Percentage of Population Below the Poverty Level 23.8% CONTEXT CONTEXT DESIGN GOALS ...

  18. Barrier height of Pt-In{sub x}Ga{sub 1-x}N (0{<=}x{<=}0.5) nanowire Schottky diodes

    SciTech Connect (OSTI)

    Guo Wei; Banerjee, Animesh; Zhang Meng; Bhattacharya, Pallab

    2011-05-02

    The barrier height of Schottky diodes made on In{sub x}Ga{sub 1-x}N nanowires have been determined from capacitance-voltage measurements. The nanowires were grown undoped on n-type (001) silicon substrates by plasma-assisted molecular beam epitaxy. The length, diameter and density of the nanowires are {approx}1 {mu}m, 20 nm, and 1x10{sup 11} cm{sup -2}. The Schottky contact was made on the top surface of the nanowires with Pt after planarizing with parylene. The measured barrier height {Phi}{sub B} varies from 1.4 eV (GaN) to 0.44 eV (In{sub 0.5}Ga{sub 0.5}N) and agrees well with the ideal barrier heights in the Schottky limit.

  19. Indoor air pollution from portable kerosene-fired space heaters. [Effects of wick height and fuel consumption rate

    SciTech Connect (OSTI)

    Traynor, G.W.; Apte, M.G.; Dillworth, J.F.; Grimsrud, D.T.

    1983-02-01

    Indoor use of unvented combustion appliances is known to cause an increase in indoor air pollutant levels. Laboratory tests were conducted on radiant and convective portable kerosene-fired space heaters to identify the pollutants they emit and to determine their emission rates. Laboratory-derived CO and NO/sub 2/ emission rates from unvented portable kerosense-fired space heaters are summarized and the effect of wick height and fuel consumption rate on CO and NO/sub 2/ emissions is given. Pollutant concentration profiles resulting from the use of kerosene heaters in a 27m/sup 3/ environmental chamber and a 240m/sup 3/ house are presented. When such heaters are operated for one hour in a 27m/sup 3/ chamber with 0.4 air changes per hour, the resultant CO/sub 2/ concentrations are well above the U.S. occupational standard, and NO/sub 2/ concentrations are well above California's short-term outdoor standard. Further data on parameters such as heater usage patterns and air exchange rates are needed to determine the actual pollutant exposure that kerosene heater users experience.

  20. Effects of surface properties on barrier height and barrier inhomogeneities of platinum contacts to n-type 4H-SiC

    SciTech Connect (OSTI)

    Huang Lingqin; Li Shijuan; Wang Dejun [School of Electronic Science and Technology, Faculty of Electronic Information and Electrical Engineering, Dalian University of Technology, Dalian 116024 (China); Qin Fuwen [State Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education), Dalian University of Technology, Dalian 116024 (China)

    2013-07-15

    We investigated the Schottky barrier of Pt/4H-SiC contact as a function of 4H-SiC surface properties which effectively controlled by electronic cyclotron resonance hydrogen plasma pretreatment for different periods and annealing. It is found that the effective barrier height monotonically increases with decreasing the degree of Fermi level pinning. Electrically homogeneous contacts are observed when the Fermi level (FL) is 'pinned (Bardeen limit)' and 'free-pinned (Schottky limit).' However, a partial pinning of FL leads to Gaussian distribution of inhomogeneous barrier height. These results could be correlated with changes in the magnitude and spatial distribution of surface state density after different pretreatments.

  1. Radiation May Indirectly Impair Growth Resulting in Reduced Standing Height via Subclinical Inflammation in Atomic-Bomb Survivors Exposed at Young Ages

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Nakashima, Eiji; Neriishi, Kazuo; Hsu, Wan-Ling

    2015-01-01

    For youngmore » atomic-bomb (A-bomb) survivors, A-bomb radiation’s (total) effect on standing height is thought to comprise the sum of direct effect and indirect effect via inflammation. With the data of five inflammatory markers—white blood cell count, sialic acid, corrected erythrocyte sedimentation rate (ESR), α 1 globulin, and α 2 globulin—obtained in adulthood during the period 1988 to 1992, a summary inflammatory index was constructed as a surrogate for the five subclinical inflammatory markers. For 3,327 A-bomb survivors exposed at ages of less than 25 years, a structural equation model was analyzed to measure direct radiation effects on adult height as well as mediating effect of radiation via inflammation on the height after adjustment for other risk factors, smoking, cancer, inflammatory disease, obesity, and diabetes mellitus. The mediation proportion of the radiation effect on height via inflammation was approximately 5% for both sexes for all ages, and indirect dose effects via inflammation were statistically significant for both sexes combined and for females exposed at ages 0 to 5 years. Indirect dose effects for all ages via sialic acid, corrected ESR, and α 2 globulin were marginally significant for both sexes combined and for females. These proportions are likely underestimated.« less

  2. Correlation between amplitude of spin accumulation signals investigated by Hanle effect measurement and effective junction barrier height in CoFe/MgO/n{sup +}-Si junctions

    SciTech Connect (OSTI)

    Saito, Y. Ishikawa, M.; Sugiyama, H.; Inokuchi, T.; Hamaya, K.; Tezuka, N.

    2015-05-07

    Correlation between the amplitude of the spin accumulation signals and the effective barrier height estimated from the slope of the log (RA) - t{sub MgO} plot (RA: resistance area product, t{sub MgO}: thickness of MgO tunnel barrier) in CoFe/MgO/n{sup +}-Si junctions was investigated. The amplitude of spin accumulation signals increases with increasing effective barrier heights. This increase of the amplitude of spin accumulation is originated from the increase of the spin polarization (P{sub Si}) in Si. The estimated absolute values of P{sub Si} using three-terminal Hanle signals are consistent with those estimated by four-terminal nonlocal-magnetoresistance (MR) and two-terminal local-MR. To demonstrate large spin accumulation in Si bulk band and enhance the local-MR through Si channel, these results indicate that the increase of the effective barrier height at ferromagnet/(tunnel barrier)/n{sup +}-Si junction electrode is important.

  3. Conway Street Apartments: A Multifamily Deep Energy Retrofit...

    Office of Scientific and Technical Information (OSTI)

    for Advanced Residential Buildings (CARB), Norwalk, Connecticut Research Org: National Renewable Energy Laboratory (NREL), Golden, CO. Sponsoring Org: USDOE Office of Energy...

  4. Conway Street Apartments: A Multifamily Deep Energy Retrofit...

    Office of Scientific and Technical Information (OSTI)

    CONSORTIUM FOR ADVANCED RESIDENTIAL BUILDINGS; MULTIFAMILY; RETROFIT; ZERO ENERGY; SOLAR THERMAL; DRAIN WATER RECOVERY SYSTEM; DEMAND-CONTROLLED RECIRCULATION SYSTEM; BRICK;...

  5. Cascade Apartments - Deep Energy Multifamily Retrofit , Kent, Washington (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-02-01

    In December of 2009-10, King County Housing Authority (KCHA) implemented energy retrofit improvements in the Cascade multifamily community, located in Kent, Washington (marine climate.)This research effort involved significant coordination from stakeholders KCHA, WA State Department of Commerce, utility Puget Sound Energy, and Cascade tenants. This report focuses on the following three primary BA research questions : 1. What are the modeled energy savings using DOE low income weatherization approved TREAT software? 2. How did the modeled energy savings compare with measured energy savings from aggregate utility billing analysis? 3. What is the Savings to Investment Ratio (SIR) of the retrofit package after considering utility window incentives and KCHA capitol improvement funding.

  6. Stay Warm in Your Apartment | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Several international organizations have made significant progress in the characterization and performance evaluation of other disposal design options and host rock characteristics (clay/shale, granite), most of which were very different from those studied in the United States. The DOE recognizes that close international collaboration is a beneficial and cost effective strategy for advancing disposal science. This report describes the active collaboration opportunities

  7. Easy Energy Tips for Apartments or Rental Homes | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Warm your home during the day by leaving the curtains on sun-facing windows open. Over the last few weeks we've talked about things like energy audits and energy-saving incentives, ...

  8. Conway Street Apartments: A Multifamily Deep Energy Retrofit

    SciTech Connect (OSTI)

    Aldrich, R.; Williamson, J.

    2014-11-01

    While single-family, detached homes account for 63% of households (EIA 2009); multi-family homes account for a very large portion of that remaining housing stock, and this fraction is growing. Through recent research efforts, CARB has been evaluating strategies and technologies that can make dramatic improvements in energy performance in multi-family buildings.

  9. EMISSION HEIGHT AND TEMPERATURE DISTRIBUTION OF WHITE-LIGHT EMISSION OBSERVED BY HINODE/SOT FROM THE 2012 JANUARY 27 X-CLASS SOLAR FLARE

    SciTech Connect (OSTI)

    Watanabe, Kyoko; Shimizu, Toshifumi [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan); Masuda, Satoshi [Solar-Terrestrial Environment Laboratory, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8601 (Japan); Ichimoto, Kiyoshi [Kwasan and Hida Observatories, Kyoto University, Yamashina, Kyoto 607-8471 (Japan); Ohno, Masanori, E-mail: watanabe.kyoko@isas.jaxa.jp [Department of Physical Sciences, Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8516 (Japan)

    2013-10-20

    White-light emissions were observed from an X1.7 class solar flare on 2012 January 27, using three continuum bands (red, green, and blue) of the Solar Optical Telescope on board the Hinode satellite. This event occurred near the solar limb, and so differences in the locations of the various emissions are consistent with differences in heights above the photosphere of the various emission sources. Under this interpretation, our observations are consistent with the white-light emissions occurring at the lowest levels of where the Ca II H emission occurs. Moreover, the centers of the source regions of the red, green, and blue wavelengths of the white-light emissions are significantly displaced from each other, suggesting that those respective emissions are emanating from progressively lower heights in the solar atmosphere. The temperature distribution was also calculated from the white-light data, and we found the lower-layer emission to have a higher temperature. This indicates that high-energy particles penetrated down to near the photosphere, and deposited heat into the ambient lower layers of the atmosphere.

  10. Schottky barrier height measurements of Cu/Si(001), Ag/Si(001), and Au/Si(001) interfaces utilizing ballistic electron emission microscopy and ballistic hole emission microscopy

    SciTech Connect (OSTI)

    Balsano, Robert; Matsubayashi, Akitomo; LaBella, Vincent P.

    2013-11-15

    The Schottky barrier heights of both n and p doped Cu/Si(001), Ag/Si(001), and Au/Si(001) diodes were measured using ballistic electron emission microscopy and ballistic hole emission microscopy (BHEM), respectively. Measurements using both forward and reverse ballistic electron emission microscopy (BEEM) and (BHEM) injection conditions were performed. The Schottky barrier heights were found by fitting to a linearization of the power law form of the Bell-Kaiser BEEM model. The sum of the n-type and p-type barrier heights are in good agreement with the band gap of silicon and independent of the metal utilized. The Schottky barrier heights are found to be below the region of best fit for the power law form of the BK model, demonstrating its region of validity.

  11. Excitonic fine-structure splitting in telecom-wavelength InAs/GaAs quantum dots: Statistical distribution and height-dependence

    SciTech Connect (OSTI)

    Goldmann, Elias Barthel, Stefan; Florian, Matthias; Jahnke, Frank; Schuh, Kolja

    2013-12-09

    The variation of the excitonic fine-structure splitting is studied for semiconductor quantum dots under the influence of a strain-reducing layer, utilized to shift the emission wavelength of the excitonic transition into the telecom-wavelength regime of 1.31.5 ?m. By means of a sp{sup 3}s{sup *}-tight-binding model and configuration interaction, we calculate wavelength shifts and fine-structure splittings for various quantum dot geometries. We find the splittings remaining small and even decreasing with strain-reducing layer composition for quantum dots with large height. Combined with an observed increased emission efficiency, the applicability for generation of entanglement photons is persistent.

  12. The signal introduced into a through transducer as a function of the height of the specimen and the diameter of a concentric hole in it

    SciTech Connect (OSTI)

    Dyakin, V.V.; Raevskii, V.Ya.; Sandovskii, V.A.

    1994-10-01

    A method is described for solving the problem of calculating the electromagnetic field excited by an a.c. winding around a nonmagnetic cylinder with or without a hole and of limited height. The result of the pertinent computer calculations were interpreted with the aid of holographs of the relative signal. It was found that the procedure can be used to calculate the signal of a through eddy-current transducer with various cylinder configurations. When a infinitely long cylinder in a through transducer is replaced by a cylinder with a length three times its radius the resulting error is less than 10%. It was also found that a direct transistion can be made from the theory of a superposed transducer to the theory of a through transducer.

  13. Correlations between In Situ Conductivity and Uniform-Height Epitaxial Morphology in Pb/Si(111)₋(7×7)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jałochowski, M.; Zdyb, R.; Tringides, M. C.

    2016-02-23

    The growth of Pb on Si(111)-7x7 at temperatures from 72 K to 201 K has been investigated using in situ electrical resistivity measurements and Scanning Tunneling Microscopy (STM). For temperatures T>140 K the specific resistivity ρ(θ) vs coverage θ shows an unusual "hump", instead of the expected monotonic decrease with θ. This novel result correlates well with the formation of uniform height 8-layer Pb islands and the superdiffusive motion of the wetting layer, despite the low temperatures. A model of the film resistivity as two resistors in series, the amorphous wetting layer and the crystalline islands, explains quantitatively the resistivitymore » dependence on θ.« less

  14. ARM - Measurement - Cloud top height

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RUC : Rapid Update Cycle Model Data Field Campaign Instruments CO2LIDAR : Carbon Dioxide Doppler Lidar MPLCMASK : Cloud mask from Micropulse Lidar VARANAL : Constrained...

  15. ARM - Measurement - Cloud base height

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARM Instruments BLC : Belfort Laser Ceilometer CEIL : Ceilometer IRSI : Infra-Red Sky ... External Instruments NOAASURF : NOAA Surface Meteorology Data, collected by NWS and ...

  16. Spatiotemporal Monte Carlo transport methods in x-ray semiconductor detectors: Application to pulse-height spectroscopy in a-Se

    SciTech Connect (OSTI)

    Fang Yuan; Badal, Andreu; Allec, Nicholas; Karim, Karim S.; Badano, Aldo

    2012-01-15

    Purpose: The authors describe a detailed Monte Carlo (MC) method for the coupled transport of ionizing particles and charge carriers in amorphous selenium (a-Se) semiconductor x-ray detectors, and model the effect of statistical variations on the detected signal. Methods: A detailed transport code was developed for modeling the signal formation process in semiconductor x-ray detectors. The charge transport routines include three-dimensional spatial and temporal models of electron-hole pair transport taking into account recombination and trapping. Many electron-hole pairs are created simultaneously in bursts from energy deposition events. Carrier transport processes include drift due to external field and Coulombic interactions, and diffusion due to Brownian motion. Results: Pulse-height spectra (PHS) have been simulated with different transport conditions for a range of monoenergetic incident x-ray energies and mammography radiation beam qualities. Two methods for calculating Swank factors from simulated PHS are shown, one using the entire PHS distribution, and the other using the photopeak. The latter ignores contributions from Compton scattering and K-fluorescence. Comparisons differ by approximately 2% between experimental measurements and simulations. Conclusions: The a-Se x-ray detector PHS responses simulated in this work include three-dimensional spatial and temporal transport of electron-hole pairs. These PHS were used to calculate the Swank factor and compare it with experimental measurements. The Swank factor was shown to be a function of x-ray energy and applied electric field. Trapping and recombination models are all shown to affect the Swank factor.

  17. RELAP5 / MOD3.2 analysis of INSC standard problem INSCSP - R7 : void fraction distribution over RBMK fuel channel height for experiments performed in the ENTEK BM test facility.

    SciTech Connect (OSTI)

    Garner, P. L.

    2002-08-22

    The RELAP5/MOD3.2 computer program has been used to analyze a series of tests investigating void fraction distribution over height in RBMK fuel channels performed in Facility BM at the ENTEK. This is RBMK Standard Problem 7 in Joint Project 6, which is the investigation of Computer Code Validation for Transient Analysis of RBMK and VVER Reactors, between the United States and Russian Minatom International Nuclear Safety Centers. The experiment facility and data, RELAP5 nodalization, and results are shown for all tests. Agreement between RELAP5 and the experiment data is reasonable.

  18. RELAP5/MOD3.2 analysis of INSC standard problem INSCSP - R7 : void fraction distribution over RBMK fuel channel height for experiments performed in the ENTEK BM test facility.

    SciTech Connect (OSTI)

    Garner, P. L.

    2002-05-24

    The RELAP5/MOD3.2 computer program has been used to analyze a series of tests investigating void fraction distribution over height in RBMK fuel channels performed in Facility BM at the ENTEK. This is RBMK Standard Problem 7 in Joint Project 6, which is the investigation of Computer Code Validation for Transient Analysis of RBMK and VVER Reactors, between the United States and Russian Minatom International Nuclear Safety Centers. The experiment facility and data, RELAP5 nodalization, and results are shown for all tests. Agreement between RELAP5 and the experiment data is reasonable.

  19. Providence Heights Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Status In Service Owner Iberdrola Renewables Developer Midwest Wind Energy Location Bureau County IL Coordinates 41.264075, -89.580853 Show Map Loading map......

  20. MULTI-CHANNEL ELECTRIC PULSE HEIGHT ANALYZER

    DOE Patents [OSTI]

    Gallagher, J.D. et al.

    1960-11-22

    An apparatus is given for converting binary information into coded decimal form comprising means, in combination with a binary adder, a live memory and a source of bigit pulses, for synchronizing the bigit pulses and the adder output pulses; a source of digit pulses synchronized with every fourth bigit pulse; means for generating a conversion pulse in response to the time coincidence of the adder output pulse and a digit pulse: means having a delay equal to two bigit pulse periods coupling the adder output with the memory; means for promptly impressing said conversion pulse on the input of said memory: and means having a delay equal to one bigit pulse period for again impressing the conversion pulse on the input of the memory whereby a fourth bigit adder pulse results in the insertion into the memory of second, third and fourth bigits.

  1. Property:Height (m) | Open Energy Information

    Open Energy Info (EERE)

    Float Wave Electric Power Station + 12 + MHK TechnologiesFloating anchored OTEC plant + 540 + MHK TechnologiesGyroWaveGen + 4.5 + MHK TechnologiesHyPEG + 20 + MHK...

  2. Wind Industry Soars to New Heights

    Broader source: Energy.gov [DOE]

    Watch the video as Jose Zayas, Director of the Wind and Water Power Technologies Office, highlights the latest wind industry trends in the 2012 Wind Technologies Market Report.

  3. Vantage Pomona Heights | Open Energy Information

    Open Energy Info (EERE)

    lands, and federal lands managed by the BLM, the Bureau of Reclamation, and the U.S. Army - Joint Base Lewis McChord-Yakima Training Center (JBLM-YTC), as well as State of...

  4. THE ROTATION OF THE WHITE LIGHT SOLAR CORONA AT HEIGHT 4 R{sub sun} FROM 1996 TO 2010: A TOMOGRAPHICAL STUDY OF LARGE ANGLE AND SPECTROMETRIC CORONAGRAPH C2 OBSERVATIONS

    SciTech Connect (OSTI)

    Morgan, Huw

    2011-09-10

    Solar rotational tomography is applied to Large Angle and Spectrometric Coronagraph (LASCO) C2/Solar and Heliospheric Observatory (SOHO) observations covering the period 1996-2010, resulting in a set of electron density maps at a height of 4 R{sub sun} from which rotation rates can be calculated. Large variation of rotation rates is measured. Rates are dominated by the Carrington rotation rate (14.18 deg d{sup -1} sidereal), but at times over the solar cycle, rates are measured between -3 and 3 deg d{sup -1} relative to the Carrington rotation rate. Rotation rates can vary considerably between latitudes, even between neighboring latitudes. They can remain relatively stable or change smoothly over long periods of times, or can change rather abruptly. There are periods for certain latitudes (for example, the equator at solar maximum) when the movement is dominated by rapid structural reconfiguration, not a coherent rotation. These results raise new questions regarding the link between the Sun and the corona, and provide fresh challenges to interpretations of the coronal structural evolution and the development of large-scale coronal models. In particular, can interchange reconnection provide an explanation of the considerable latitudinal differences in rotation rates, and what mechanism can explain abrupt changes in rotation rates?

  5. Non-Residential Solar Water Heating Site Assessment at Milwaukee Apartment Buildings

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Midwest Renewable Energy Association's certified site assessors conducted 25 site assessments under a subcontract with NREL in 2009. The attached is one of the SHW assessments.

  6. Catalysts on the Cusp of Coming Apart | U.S. DOE Office of Science...

    Office of Science (SC) Website

    Catalysts are molecular "machines" that speed chemical reactions. They are used by both ... For example, Ted developed a program to show minority students how to design careers in ...

  7. Native Village of Unalakleet - Feasability Study for Retrofit of 14 Apartment Complexes

    Office of Environmental Management (EM)

    American Renewable Energy Program Development November 17, 2003 Sandra Begay-Campbell Principal Member of the Technical Staff Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy under contract DE-AC04-94AL85000. Native American RE activities featured in Sandia Technology Quarterly & Lockheed Martin Customer Focus Newsletter Sandra Begay-Campbell with two Navajo electrical technicians checking an NTUA PV

  8. Idaho Site D&D Crew Uses Specialized Tools to Cut Apart Massive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    floor of a boiler building where heat exchangers used heated sodium from the Experimental Breeder Reactor-II (EBR-II) to produce steam to drive a turbine and generate electricity. ...

  9. Pull-Apart in Strike-Slip Fault Zone | Open Energy Information

    Open Energy Info (EERE)

    of sinistral fault systems, resulting in localized crustal extension and enhanced permeability. Other definitions:Wikipedia Reegle Controlling Structures List of controlling...

  10. Existing Whole-House Solutions Case Study: Cascade Apartments - Deep Energy Multifamily Retrofit

    SciTech Connect (OSTI)

    2014-02-01

    In December of 2009-10, King County Housing Authority (KCHA) implemented energy retrofit improvements in the Cascade multifamily community, located in Kent, Washington, which resulted in annual energy cost savings of 22%, improved comfort and air quality for residents, and increased durability of the units. This research effort involved significant coordination from stakeholders KCHA, WA State Department of Commerce, utility Puget Sound Energy, and Cascade tenants. This report focuses on the following three primary Building America research questions: 1. What are the modeled energy savings using DOE low income weatherization approved TREAT software? 2. How did the modeled energy savings compare with measured energy savings from aggregate utility billing analysis? 3. What is the Savings to Investment Ratio of the retrofit package after considering utility window incentives and KCHA capital improvement funding.

  11. Building America Case Study: Conway Street Apartments, Greenfield, Massachusetts (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-12-01

    While single-family, detached homes account for 63% of households (EIA 2009); multi-family homes account for a very large portion of that remaining housing stock, and this fraction is growing. Through recent research efforts, CARB has been evaluating strategies and technologies that can make dramatic improvements in energy performance in multi-family buildings

  12. Controlling potential barrier height by changing V-shaped pit size and the effect on optical and electrical properties for InGaN/GaN based light-emitting diodes

    SciTech Connect (OSTI)

    Okada, Narihito Kashihara, Hiroyuki; Sugimoto, Kohei; Yamada, Yoichi; Tadatomo, Kazuyuki

    2015-01-14

    The internal quantum efficiency (IQE) of InGaN/GaN multiple quantum wells (MQWs) with blue light emission was improved by inserting an InGaN/GaN superlattice (SL) beneath the MQWs. While the SL technique is useful for improving the light-emitting diode (LED) performance, its effectiveness from a multilateral point of view requires investigation. V-shaped pits (V-pits), which generate a potential barrier and screen the effect of the threading dislocation, are one of the candidates for increasing the light emission efficiency of LEDs exceptionally. In this research, we investigated the relationship between the V-pit and SL and revealed that the V-pit diameter is strongly correlated with the IQE by changing the number of SL periods. Using scanning near-field optical microscopy and photoluminescence measurements, we demonstrated the distinct presence of the potential barrier formed by the V-pits around the dislocations. The relationship between the V-pit and the number of SL periods resulted in changing the potential barrier height, which is related to the V-pit diameter determined by the number of SL periods. In addition, we made an attempt to insert pit expansion layers (PELs) composed of combination of SL and middle temperature grown GaN layer instead of only SL structure. As a result of the evaluation of LEDs using SL or PEL, the EL intensity was strongly related to pit diameter regardless of the structures to form the V-pits. In addition, it was clear that larger V-pits reduce the efficiency droop, which is considered to be suppression of the carrier loss at high injection current.

  13. Method and apparatus for fabrication of high gradient insulators with parallel surface conductors spaced less than one millimeter apart

    DOE Patents [OSTI]

    Sanders, David M. (Livermore, CA); Decker, Derek E. (Livermore, CA)

    1999-01-01

    Optical patterns and lithographic techniques are used as part of a process to embed parallel and evenly spaced conductors in the non-planar surfaces of an insulator to produce high gradient insulators. The approach extends the size that high gradient insulating structures can be fabricated as well as improves the performance of those insulators by reducing the scale of the alternating parallel lines of insulator and conductor along the surface. This fabrication approach also substantially decreases the cost required to produce high gradient insulators.

  14. Building America Whole-House Solutions for Existing Homes: Cascade Apartments- Deep Energy Multifamily Retrofit (Fact Sheet)

    Broader source: Energy.gov [DOE]

    In December of 2009-10, King County Housing Authority implemented energy retrofit improvements in the Cascade multifamily community, located in Kent, Washington, which resulted in annual energy cost savings of 22%, improved comfort and air quality for residents, and increased durability of the units.

  15. Glenn Heights, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    lse,"poi":true,"imageoverlays":,"markercluster":false,"searchmarkers":"","locations":"text":"","title":"","link":null,"lat":32.5487479,"lon":-96.8566667,"alt":0,"address":"","i...

  16. Richmond Heights, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    lse,"poi":true,"imageoverlays":,"markercluster":false,"searchmarkers":"","locations":"text":"","title":"","link":null,"lat":41.5528288,"lon":-81.5101208,"alt":0,"address":"","i...

  17. Microscopic Description of Nuclear Fission: Fission Barrier Heights...

    Office of Scientific and Technical Information (OSTI)

    Resource Type: Conference Resource Relation: Conference: Presented at: 5th International Conference on Fission and properties of neutron-rich nuclei, Sanibel Island, FL, United ...

  18. Raman lidar/AERI PBL Height Product (Dataset) | Data Explorer

    Office of Scientific and Technical Information (OSTI)

    AERI measurements of downwelling radiance are used in a physical retrieval approach (Smith et al. 1999, Feltz et al. 1998) to derive profiles of temperature and water vapor. The ...

  19. About Effective? Height of the Aerosol Atmosphere in Visible...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kabanov, M. V. Panchenko, Yu. A. Pkhalagov, and S. M. Sakerin Institute of Atmospheric Optics Tomsk, Russia Introduction Aerosol component of the atmosphere is one of the important...

  20. A new technique to measure tunneling barrier height in solid...

    Office of Scientific and Technical Information (OSTI)

    Authors: Mason, Thomas A 1 ; Dattelbaum, Andrew M 1 ; Mara, Nathan A 1 ; Kaschner, George C 1 ; Johnson, Oliver K 2 ; Seegmiller, Daniel 2 ; Fullwood, David T 2 + ...

  1. Admiralty Inlet Hub-Height Turbulence Measurements from June 2012

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kilcher, Levi

    2012-06-18

    This data is from measurements at Admiralty Head, in admiralty inlet. The measurements were made using an IMU equipped ADV mounted on a mooring, the 'Tidal Turbulence Mooring' or 'TTM'. The inertial measurements from the IMU allows for removal of mooring motion in post processing. The mooring motion has been removed from the stream-wise and vertical velocity signals (u, w). The lateral (v) velocity may have some 'persistent motion contamination' due to mooring sway. The ADV was positioned 11m above the seafloor in 58m of water at 48.1515N, 122.6858W. Units ----- - Velocity data (_u, urot, uacc) is in m/s. - Acceleration (Accel) data is in m/s^2. - Angular rate (AngRt) data is in rad/s. - The components of all vectors are in 'ENU' orientation. That is, the first index is True East, the second is True North, and the third is Up (vertical). - All other quantities are in the units defined in the Nortek Manual. Motion correction and rotation into the ENU earth reference frame was performed using the Python-based open source DOLfYN library (http://lkilcher.github.io/dolfyn/). Details on motion correction can be found there. For additional details on this dataset see the included Marine Energy Technology Symposium paper.

  2. ARM - Publications: Science Team Meeting Documents: The height...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    operating in a vertical cloud mode. This analysis was partly driven by the suggestion of Johnson et al (1999) and May and Rajopadhyaya (1999) that there were two distinct modes of...

  3. 'Data Deluge' Pushes Mass Spec Imaging to New Heights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in industry-such as image search and speech recognition-but ... Enter randomized linear algebra (RLA), a mathematical ... compounds and locations in terms of their importance," said ...

  4. Airports Soar to New Heights with Alternative Fuels

    Broader source: Energy.gov [DOE]

    A number of airports have adopted the use of alternative fuels and advanced technology vehicles, ranging from gaseous fuels to hybrid cars.

  5. CHIP House Takes Design to Different Heights (Literally)

    Broader source: Energy.gov [DOE]

    Check out the SCI-Arc/Caltech 2011 Solar Decathlon team's house to find out more about their net-zero energy use home -- the CHIP House.

  6. Reaching New Heights in Accelerator Technology | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    many of the most compelling questions of the 21st century - regarding the fundamental nature of matter, energy, space and time, dark matter, dark energy, and extra dimensions. ...

  7. Battery driven 8 channel pulse height analyzer with compact, single gamma-peak display

    DOE Patents [OSTI]

    Morgan, John P.; Piper, Thomas C.

    1991-01-01

    The invention comprises a hand-held wand including an l.e.d. display and a aI photomultiplier tube encased in lead or other suitable gamma shielding material, and an electronics and battery back-pack package connected to the wand.

  8. Influences of photosynthetically active radiation on cladode orientation, stem tilting, and height of cacti

    SciTech Connect (OSTI)

    Nobel, P.S.

    1981-08-01

    Stem orientation and morphology were investigated for 14 species of cacti in Chile, Ecuador, Mexico, and the United States. The interception of photosynthetically active radiation (PAR) was specifically considered for cladodes (flattened stems) of platyopuntias, for tilted cylindrical stems, and in the presence of surrounding vegetation.

  9. On the influence of shrub height and expansion on boreal climate...

    Office of Scientific and Technical Information (OSTI)

    Authors: Bonfils, C ; Phillips, T ; Lawrence, D ; Cameron-Smith, P ; Riley, W ; Subin, Z Publication Date: 2011-08-22 OSTI Identifier: 1113486 Report Number(s): LLNL-JRNL-495260 ...

  10. OPERATION UPSHOT-KNOTHOLE Project 6.12 DETERMINATION OF HEIGHT...

    Office of Scientific and Technical Information (OSTI)

    ... Attempts to modify a Mark III Type Bhangmeter by substituting a lead sulfide cell for the photo cell made possible successful time of flight measurements on the 260 mm gun when ...

  11. DOE Zero Energy Ready Home Case Study: Amaris Homes, Fishers Circle, Vadnais Heights, MN

    Broader source: Energy.gov [DOE]

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the cold climate that got a HERS 47 without PV or HERS 22 with PV, with 2x4 24” on-center walls with 1 inch rigid foam plus 3” ccsf in cavity, a slab on grade foundation with 2” rigid foam under and around slab, a vented attic with with 2” ccsf plus R-15 blown cellulose, a central heat pump and HRV.

  12. Potential Wind Capacity at 110-m Hub Height for the United States

    Wind Powering America (EERE)

  13. Potential Wind Capacity at 140-m Hub Height for the United States

    Wind Powering America (EERE)

  14. ARM: Boundary-layer height data with CEIL (Dataset) | Data Explorer

    Office of Scientific and Technical Information (OSTI)

    Sponsoring Org: USDOE Office of Science (SC), Biological and Environmental Research (BER) Country of Publication: United States Availability: ORNL Language: English Subject: 54 ...

  15. Mechanisms of flame stabilisation at low lifted height in a turbulent lifted slot-jet flame

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Karami, Shahram; Hawkes, Evatt R.; Talei, Mohsen; Chen, Jacqueline H.

    2015-07-23

    A turbulent lifted slot-jet flame is studied using direct numerical simulation (DNS). A one-step chemistry model is employed with a mixture-fraction-dependent activation energy which can reproduce qualitatively the dependence of the laminar burning rate on the equivalence ratio that is typical of hydrocarbon fuels. The basic structure of the flame base is first examined and discussed in the context of earlier experimental studies of lifted flames. Several features previously observed in experiments are noted and clarified. Some other unobserved features are also noted. Comparison with previous DNS modelling of hydrogen flames reveals significant structural differences. The statistics of flow andmore » relative edge-flame propagation velocity components conditioned on the leading edge locations are then examined. The results show that, on average, the streamwise flame propagation and streamwise flow balance, thus demonstrating that edge-flame propagation is the basic stabilisation mechanism. Fluctuations of the edge locations and net edge velocities are, however, significant. It is demonstrated that the edges tend to move in an essentially two-dimensional (2D) elliptical pattern (laterally outwards towards the oxidiser, then upstream, then inwards towards the fuel, then downstream again). It is proposed that this is due to the passage of large eddies, as outlined in Suet al.(Combust. Flame, vol. 144 (3), 2006, pp. 494–512). However, the mechanism is not entirely 2D, and out-of-plane motion is needed to explain how flames escape the high-velocity inner region of the jet. Finally, the time-averaged structure is examined. A budget of terms in the transport equation for the product mass fraction is used to understand the stabilisation from a time-averaged perspective. The result of this analysis is found to be consistent with the instantaneous perspective. The budget reveals a fundamentally 2D structure, involving transport in both the streamwise and transverse directions, as opposed to possible mechanisms involving a dominance of either one direction of transport. Lastly, it features upstream transport balanced by entrainment into richer conditions, while on the rich side, upstream turbulent transport and entrainment from leaner conditions balance the streamwise convection.« less

  16. DOE/SC-ARM/TR-132 Planetary Boundary Layer (PBL) Height Value

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Figure 4 shows an example quicklook for a case classified as NRL by the Liu-Liang method. Here, there is only one panel as the wind speed and LLJ do not enter into the ...

  17. ARM: Vaisala Ceilometer (VCEIL): cloud base heights, 25,000 feet...

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 1025313 DOE Contract Number: DE-AC05-00OR22725 Resource Type: Dataset Data Type: Numeric Data Research Org: Atmospheric Radiation Measurement (ARM) Archive, Oak ...

  18. ARM: X-SAPR Horizon-to-horizon Range-Height Indicator scan (Dataset...

    Office of Scientific and Technical Information (OSTI)

    OSTI Identifier: 1025326 DOE Contract Number: DE-AC05-00OR22725 Resource Type: Dataset Data Type: Numeric Data Research Org: Atmospheric Radiation Measurement (ARM) Archive, Oak ...

  19. 23 V.S.A. Section 1402 Overweight, Width, Height, and Length...

    Open Energy Info (EERE)

    FeesLegal Abstract Sets forth fee requirements for issuing permits for operating a motor vehicle in excess of weight and size limits. Published NA Year Signed or Took Effect...

  20. Mechanisms of flame stabilisation at low lifted height in a turbulent lifted slot-jet flame

    SciTech Connect (OSTI)

    Karami, Shahram; Hawkes, Evatt R.; Talei, Mohsen; Chen, Jacqueline H.

    2015-07-23

    A turbulent lifted slot-jet flame is studied using direct numerical simulation (DNS). A one-step chemistry model is employed with a mixture-fraction-dependent activation energy which can reproduce qualitatively the dependence of the laminar burning rate on the equivalence ratio that is typical of hydrocarbon fuels. The basic structure of the flame base is first examined and discussed in the context of earlier experimental studies of lifted flames. Several features previously observed in experiments are noted and clarified. Some other unobserved features are also noted. Comparison with previous DNS modelling of hydrogen flames reveals significant structural differences. The statistics of flow and relative edge-flame propagation velocity components conditioned on the leading edge locations are then examined. The results show that, on average, the streamwise flame propagation and streamwise flow balance, thus demonstrating that edge-flame propagation is the basic stabilisation mechanism. Fluctuations of the edge locations and net edge velocities are, however, significant. It is demonstrated that the edges tend to move in an essentially two-dimensional (2D) elliptical pattern (laterally outwards towards the oxidiser, then upstream, then inwards towards the fuel, then downstream again). It is proposed that this is due to the passage of large eddies, as outlined in Suet al.(Combust. Flame, vol. 144 (3), 2006, pp. 494–512). However, the mechanism is not entirely 2D, and out-of-plane motion is needed to explain how flames escape the high-velocity inner region of the jet. Finally, the time-averaged structure is examined. A budget of terms in the transport equation for the product mass fraction is used to understand the stabilisation from a time-averaged perspective. The result of this analysis is found to be consistent with the instantaneous perspective. The budget reveals a fundamentally 2D structure, involving transport in both the streamwise and transverse directions, as opposed to possible mechanisms involving a dominance of either one direction of transport. Lastly, it features upstream transport balanced by entrainment into richer conditions, while on the rich side, upstream turbulent transport and entrainment from leaner conditions balance the streamwise convection.

  1. Mechanisms of flame stabilisation at low lifted height in a turbulent lifted slot-jet flame

    SciTech Connect (OSTI)

    Karami, Shahram; Hawkes, Evatt R.; Talei, Mohsen; Chen, Jacqueline H.

    2015-07-23

    A turbulent lifted slot-jet flame is studied using direct numerical simulation (DNS). A one-step chemistry model is employed with a mixture-fraction-dependent activation energy which can reproduce qualitatively the dependence of the laminar burning rate on the equivalence ratio that is typical of hydrocarbon fuels. The basic structure of the flame base is first examined and discussed in the context of earlier experimental studies of lifted flames. Several features previously observed in experiments are noted and clarified. Some other unobserved features are also noted. Comparison with previous DNS modelling of hydrogen flames reveals significant structural differences. The statistics of flow and relative edge-flame propagation velocity components conditioned on the leading edge locations are then examined. The results show that, on average, the streamwise flame propagation and streamwise flow balance, thus demonstrating that edge-flame propagation is the basic stabilisation mechanism. Fluctuations of the edge locations and net edge velocities are, however, significant. It is demonstrated that the edges tend to move in an essentially two-dimensional (2D) elliptical pattern (laterally outwards towards the oxidiser, then upstream, then inwards towards the fuel, then downstream again). It is proposed that this is due to the passage of large eddies, as outlined in Suetal.(Combust. Flame, vol.144 (3), 2006, pp.494512). However, the mechanism is not entirely 2D, and out-of-plane motion is needed to explain how flames escape the high-velocity inner region of the jet. Finally, the time-averaged structure is examined. A budget of terms in the transport equation for the product mass fraction is used to understand the stabilisation from a time-averaged perspective. The result of this analysis is found to be consistent with the instantaneous perspective. The budget reveals a fundamentally 2D structure, involving transport in both the streamwise and transverse directions, as opposed to possible mechanisms involving a dominance of either one direction of transport. It features upstream transport balanced by entrainment into richer conditions, while on the rich side, upstream turbulent transport and entrainment from leaner conditions balance the streamwise convection.

  2. DOE ZERH Case Study: Amaris Homes, Fishers Circle, Vadnais Heights, MN

    SciTech Connect (OSTI)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the cold climate that got a HERS 47 without PV or HERS 22 with PV, with 2x4 24” on-center walls with 1 inch rigid foam plus 3” ccsf in cavity, a slab on grade foundation with 2” rigid foam under and around slab, a vented attic with with 2” ccsf plus R-15 blown cellulose, a central heat pump and HRV.

  3. Eddy-driven sediment transport in the Argentine Basin: Is the height of the Zapiola Rise hydrodynamically controlled?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Weijer, Wilbert; Maltrud, Mathew E.; Homoky, William B.; Polzin, Kurt L.; Maas, Leo R. M.

    2015-03-27

    In this study, we address the question whether eddy-driven transports in the Argentine Basin can be held responsible for enhanced sediment accumulation over the Zapiola Rise, hence accounting for the existence and growth of this sediment drift. To address this question, we perform a 6 year simulation with a strongly eddying ocean model. We release two passive tracers, with settling velocities that are consistent with silt and clay size particles. Our experiments show contrasting behavior between the silt fraction and the lighter clay. Due to its larger settling velocity, the silt fraction reaches a quasisteady state within a few years,more » with abyssal sedimentation rates that match net input. In contrast, clay settles only slowly, and its distribution is heavily stratified, being transported mainly along isopycnals. Yet, both size classes display a significant and persistent concentration minimum over the Zapiola Rise. We show that the Zapiola Anticyclone, a strong eddy-driven vortex that circulates around the Zapiola Rise, is a barrier to sediment transport, and hence prevents significant accumulation of sediments on the Rise. We conclude that sediment transport by the turbulent circulation in the Argentine Basin alone cannot account for the preferred sediment accumulation over the Rise. We speculate that resuspension is a critical process in the formation and maintenance of the Zapiola Rise.« less

  4. Eddy-driven sediment transport in the Argentine Basin: Is the height of the Zapiola Rise hydrodynamically controlled?

    SciTech Connect (OSTI)

    Weijer, Wilbert; Maltrud, Mathew E.; Homoky, William B.; Polzin, Kurt L.; Maas, Leo R. M.

    2015-03-27

    In this study, we address the question whether eddy-driven transports in the Argentine Basin can be held responsible for enhanced sediment accumulation over the Zapiola Rise, hence accounting for the existence and growth of this sediment drift. To address this question, we perform a 6 year simulation with a strongly eddying ocean model. We release two passive tracers, with settling velocities that are consistent with silt and clay size particles. Our experiments show contrasting behavior between the silt fraction and the lighter clay. Due to its larger settling velocity, the silt fraction reaches a quasisteady state within a few years, with abyssal sedimentation rates that match net input. In contrast, clay settles only slowly, and its distribution is heavily stratified, being transported mainly along isopycnals. Yet, both size classes display a significant and persistent concentration minimum over the Zapiola Rise. We show that the Zapiola Anticyclone, a strong eddy-driven vortex that circulates around the Zapiola Rise, is a barrier to sediment transport, and hence prevents significant accumulation of sediments on the Rise. We conclude that sediment transport by the turbulent circulation in the Argentine Basin alone cannot account for the preferred sediment accumulation over the Rise. We speculate that resuspension is a critical process in the formation and maintenance of the Zapiola Rise.

  5. EIS-0505: Vantage to Pomona Heights 230 kV Transmission Line Project; Yakima, Grant, Benton, and Kittitas Counties, Washington

    Broader source: Energy.gov [DOE]

    The Bureau of Land Management is preparing, with DOE’s Bonneville Power Administration (BPA) as a cooperating agency, an EIS that evaluates the potential environmental impacts of a proposal to construct a 230-kV transmission line in Washington State. BPA’s proposed action is to interconnect the proposed transmission line to an existing BPA substation.

  6. GAMMA-PULSE-HEIGHT EVALUATION OF A USA SAVANNAH RIVER SITE BURIAL GROUND SPECIAL CONFIGURATION WASTE ITEM

    SciTech Connect (OSTI)

    Dewberry, R.; Sigg, R.; Salaymeh, S.

    2009-03-23

    The Savannah River Site (SRS) Burial Ground had a container labeled as Box 33 for which they had no reliable solid waste stream designation. The container consisted of an outer box of dimensions 48-inch x 46-inch x 66-inch and an inner box that contained high density and high radiation dose material. From the outer box Radiation Control measured an extremity dose rate of 22 mrem/h. With the lid removed from the outer box, the maximum dose rate measured from the inner box was 100 mrem/h extremity and 80 mrem/h whole body. From the outer box the material was sufficiently high in density that the Solid Waste Management operators were unable to obtain a Co-60 radiograph of the contents. Solid Waste Management requested that the Analytical Development Section of Savannah River National Laboratory perform a {gamma}-ray assay of the item to evaluate the radioactive content and possibly to designate a solid waste stream. This paper contains the results of three models used to analyze the measured {gamma}-ray data acquired in an unusual configuration.

  7. Alliance for Sustainable Colorado Renovation Raises Its Energy Performance to New Heights, Commercial Building Energy Efficiency (Fact Sheet); Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect (OSTI)

    2015-03-01

    The Alliance for Sustainable Colorado (The Alliance) is a nonprofit organization aiming to transform sustainability from vision to reality. Part of its mission is to change the operating paradigms of commercial building design to make them more sustainable. Toward that end The Alliance uses its headquarters, The Alliance Center at 1536 Wynkoop Street in Denver, as a living laboratory, conductingpilot studies of innovative commercial-building-design solutions for using and generating energy.

  8. Corium shield

    DOE Patents [OSTI]

    McDonald, Douglas B.; Buchholz, Carol E.

    1994-01-01

    A shield for restricting molten corium from flowing into a water sump disposed in a floor of a containment vessel includes upper and lower walls which extend vertically upwardly and downwardly from the floor for laterally bounding the sump. The upper wall includes a plurality of laterally spaced apart flow channels extending horizontally therethrough, with each channel having a bottom disposed coextensively with the floor for channeling water therefrom into the sump. Each channel has a height and a length predeterminedly selected for allowing heat from the molten corium to dissipate through the upper and lower walls as it flows therethrough for solidifying the molten corium therein to prevent accumulation thereof in the sump.

  9. FLUID CONTACTOR APPARATUS

    DOE Patents [OSTI]

    Spence, R.; Streeton, R.J.W.

    1956-04-17

    The fluid contactor apparatus comprises a cylindrical column mounted co- axially and adapted to rotate within a cylindrical vessel, for the purpose of extracting a solute from am aqueous solution by means of an organic solvent. The column is particularly designed to control the vortex pattern so as to reduce the height of the vortices while, at the same time, the width of the annular radius in the radial direction between the vessel and column is less than half the radius of the column. A plurality of thin annular fins are spaced apart along the rotor approximately twice the radial dimension of the column such that two contrarotating substantially circular vortices are contained within each pair of fins as the column is rotated.

  10. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Apartment Compartmentalization with an Aerosol-Based Sealing Process Building America Technology Solutions for New and Existing Homes: Apartment Compartmentalization with an...

  11. "Table HC14.2 Living Space Characteristics by West Census Region...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Basements" "Basement in Single-Family Homes" "and Apartments in 2-4 Unit ... "Attics" "Attic in Single-Family Homes and" "Apartments in 2-4 Unit ...

  12. "Table HC13.2 Living Space Characteristics by South Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Basements" "Basement in Single-Family Homes" "and Apartments in 2-4 Unit ... "Attics" "Attic in Single-Family Homes and" "Apartments in 2-4 Unit ...

  13. "Table HC10.2 Living Space Characteristics by U.S. Census Region...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Basements" "Basement in Single-Family Homes" "and Apartments in 2-4 Unit ... "Attics" "Attic in Single-Family Homes and" "Apartments in 2-4 Unit ...

  14. "Table HC12.2 Living Space Characteristics by Midwest Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Basements" "Basement in Single-Family Homes" "and Apartments in 2-4 Unit ... "Attics" "Attic in Single-Family Homes and" "Apartments in 2-4 Unit ...

  15. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    ... "Basements" "Basement in Single-Family Homes" "and Apartments in 2-4 Unit ... "Attics" "Attic in Single-Family Homes and" "Apartments in 2-4 Unit ...

  16. "Table HC15.2 Living Space Characteristics by Four Most Populated...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Basements" "Basement in Single-Family Homes" "and Apartments in 2-4 Unit ... "Attics" "Attic in Single-Family Homes and" "Apartments in 2-4 Unit ...

  17. " Million U.S. Housing Units"

    U.S. Energy Information Administration (EIA) Indexed Site

    Unit" ,"Housing Units (millions)","Single-Family Units",,"Apartments in Buildings ... Housing Unit" ,"RSEs for Housing Units ","Single-Family Units",,"Apartments in Buildings ...

  18. "Table HC4.6 Air Conditioning Characteristics by Renter-Occupied...

    U.S. Energy Information Administration (EIA) Indexed Site

    Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings ... Unit" ,"RSEs for Housing Units " ,,,"Single-Family Units",,"Apartments in Buildings ...

  19. Building America Whole-House Solutions for Existing Homes: Cascade...

    Energy Savers [EERE]

    Homes: Cascade Apartments - Deep Energy Multifamily Retrofit (Fact Sheet) Building America Whole-House Solutions for Existing Homes: Cascade Apartments - Deep Energy Multifamily...

  20. Building America Whole-House Solutions for Existing Homes: Conway...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conway Street Apartments - Greenfield, Massachusetts Building America Whole-House Solutions for Existing Homes: Conway Street Apartments - Greenfield, Massachusetts Through recent ...

  1. CNS helps provide housing to homeless veterans | Y-12 National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    second phase of the project is rehabilitating a former apartment complex off Washington Pike that will provide another 15 apartment homes. The three-building Washington Oaks...

  2. ARM - Datastreams - mwrp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    equilibriumLevelPres ( time ) Frequency gHz frequency ( frequency ) Height meters above ground level height ( height ) Zenith-pointing infrared temperature at 10um K...

  3. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Insects as Clear Air Vertical Velocity Profilers Edward Luke Brookhaven National Lab Pavlos Kollias McGill University Steve Klein LLNL Velocity (m/s) Height (km) Velocity (m/s) Height (km) Cloud Base Height Velocity Velocity (m/s) Height (km) Velocity Velocity Updraft Insect Spectrum Velocity (m/s) Height (km) Velocity (m/s) Height (km) Velocity (m/s) Height (km) Velocity (m/s) Height (km) Velocity (m/s) Height (km) Velocity (m/s) Height (km) Velocity (m/s) Height (km) Velocity (m/s) Height (km)

  4. Tall Tower Wind Energy Monitoring and Numerical Model Validation in Northern Nevada

    SciTech Connect (OSTI)

    Koracin, D.; Kaplan, M.; Smith, C.; McCurdy, G.; Wolf, A.; McCord, T.; King, K.; Belu, R.; Horvath, K.

    2015-10-01

    The main objectives of this project were to conduct a tall-tower and sodar field campaign in complex terrain, investigate wind properties relevant to wind energy assessment, and evaluate high-resolution models with fixed and adaptive grid structures. Two 60-m towers at Virginia Peak ridges near Washoe Valley, Nevada, were instrumented with cup and vane anemometers as well as sonic anemometers, and an acoustic sounder (hereafter sodar) was installed near one of the towers. The towers were located 2,700 m apart with a vertical distance of 140 m elevation between their bases. Each tower had a downhill exposure of rolling complex terrain, with the nearby valley floor 3,200 m to the west and 800 m below the summit. Cup anemometers were installed at both towers at 20, 40, and 60 m, wind vanes at 20 and 60 m, and sonic anemometers at 20 and 60 m. The sodar measurements were nominally provided every 10 m in vertical distance from 40 to 200 m with the quality of the data generally decreasing with height. Surface air temperature, atmospheric pressure, and radiation measurements were conducted at 1.5 m AGL at both of the towers. Although the plan was to conduct a 1-year period of data collection, we extended the period (October 5, 2012 through February 24, 2014) to cover for possible data loss from instrument or communication problems. We also present a preliminary analysis of the towers and sodar data, including a detailed inventory of available and missing data as well as outliers. The analysis additionally includes calculation of the Weibull parameters, turbulence intensity, and initial computation of wind power density at various heights.

  5. Category:Little Rock, AR | Open Energy Information

    Open Energy Info (EERE)

    71 KB SVMediumOffice Little Rock AR Entergy Arkansas Inc.png SVMediumOffice Little ... 68 KB SVMidriseApartment Little Rock AR Entergy Arkansas Inc.png SVMidriseApartment Lit......

  6. Table HC1.2.2 Living Space Characteristics by Average Floorspace

    U.S. Energy Information Administration (EIA) Indexed Site

    ... "Basement (in Single-Family Homes and" "Apartments in 2-4 Unit ...926,828,474,427,382,219 "Attic (in Single-Family Homes and" "Apartments in 2-4 Unit ...

  7. Total..........................................................

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Basements Basement in Single-Family Homes and Apartments in 2-4 Unit Buildings ... Attics Attic in Single-Family Homes and Apartments in 2-4 Unit Buildings ...

  8. "Table HC3.6 Air Conditioning Characteristics by Owner-Occupied...

    U.S. Energy Information Administration (EIA) Indexed Site

    Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings ... for U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings ...

  9. Total..........................................................

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Average Square Feet per Apartment in a -- Apartments (millions) Major Outside Wall Construction Siding (Aluminum, Vinyl, Steel)...... 35.3 3.5 1,286 1,090 325 852 786 461 ...

  10. Energy Impacts of Energy and Indoor Environmental Quality Retrofits...

    Office of Scientific and Technical Information (OSTI)

    Monthly gas and electricity use data from a set of 13 study apartments and 20 control ... The control apartments were not retrofit. Pre-retrofit modeling indicated annual energy ...

  11. HUD CHP GUIDE #1- Questions and Answers ON CHP FOR MULTIFAMILIY HOUSING, September 2005

    Broader source: Energy.gov [DOE]

    This guide explains the basics of Combined Heat and Power (CHP) for apartment building owners and managers

  12. South Bronx Overall Economic Development Corporation

    SciTech Connect (OSTI)

    2004-09-01

    This is a fact sheet that describes the energy efficient design and appliances that were used in South Bronx apartments.

  13. Smart-E loans

    Broader source: Energy.gov [DOE]

    Apart from custom energy efficiency financing, the program also offers special bundle financing for certain qualified energy improvements.

  14. Laser heterodyne surface profiler

    DOE Patents [OSTI]

    Sommargren, Gary E. (Livermore, CA)

    1982-01-01

    A method and apparatus is disclosed for testing the deviation of the face of an object from a flat smooth surface using a beam of coherent light of two plane-polarized components, one of a frequency constantly greater than the other by a fixed amount to produce a difference frequency with a constant phase to be used as a reference. The beam also is split into its two components with the separate components directed onto spaced apart points onthe face of the object to be tested for smoothness. The object is rotated on an axis coincident with one component which is directed to the face of the object at the center which constitutes a virtual fixed point. This component also is used as a reference. The other component follows a circular track on the face of the object as the object is rotated. The two components are recombined after reflection to produce a reflected frequency difference of a phase proportional to the difference in path length which is compared with the reference phase to produce a signal proportional to the deviation of the height of the surface along the circular track with respect to the fixed point at the center.

  15. Laser heterodyne surface profiler

    DOE Patents [OSTI]

    Sommargren, Gary E. (Livermore, CA)

    1984-01-01

    Method and apparatus for testing the deviation of the face of an object from a flat smooth surface using a laser beam having two plane-polarized components, one of a frequency greater than the other to produce a difference frequency with a phase to be used as a reference. The beam also is split into its two components which are directed onto spaced apart points on the face of the object. The object is rotated on an axis coincident with one component as a reference. The other component follows a circular track on the face of the object as the object is rotated. The two components are recombined after reflection to produce a difference frequency having a phase that is shifted in an amount that is proportional to the difference in path length as compared to the reference phase to produce an electrical output signal proportional to the deviation of the height of the surface along the circular track. The output signal is generated by means of a phase detector that includes a first photodetector in the path of the recombined components and a second photodetector in the path of the reference phase. The output signal is dependent on the phase difference of the two photodetector signals. A polarizer, a quarter-wave plate and a half-wave plate are in series in the path of the reference phase. Rotation of the half-wave plate can be used for phase adjustment over a full 360.degree. range for initial calibration of the apparatus.

  16. ARM: Multi-Filter Radiometer (MFR): upwelling irradiance at 3...

    Office of Scientific and Technical Information (OSTI)

    Multi-Filter Radiometer (MFR): upwelling irradiance at 3-meter height Title: ARM: Multi-Filter Radiometer (MFR): upwelling irradiance at 3-meter height Multi-Filter Radiometer ...

  17. ARM - VAP Product - arsclwacr1kollias

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The measurements below provided by this product are those considered scientifically relevant. Cloud base height Cloud top height Radar Doppler Radar polarization Radar reflectivity...

  18. ARM - VAP Process - kazrarscl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are those considered scientifically relevant. Cloud base height Cloud top height Radar Doppler Radar polarization Radar reflectivity Vertical velocity Locations North Slope...

  19. ARM - Datastreams - wacrspeccmaskxpol

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Units Variable Locator Mask for Spectra unitless LocatorMask ( time, heights ) Radar Doppler Mean Doppler Velocity ms MeanDopplerVelocity ( time, heights ) Calculated...

  20. ARM - Campaign Instrument - nawx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    available measurements, including those recorded for diagnostic or quality assurance purposes. Cloud fraction Cloud base height Cloud top height Radar Doppler Radar reflectivity...

  1. ARM - Datastreams - wacrspeccmaskcopol

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Units Variable Locator Mask for Spectra unitless LocatorMask ( time, heights ) Radar Doppler Mean Doppler Velocity ms MeanDopplerVelocity ( time, heights ) Calculated...

  2. ARM - Datastreams - mwacr

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ( height ) North latitude degreeN lat ( time ) East longitude degreeE lon ( time ) Radar Doppler Mean Doppler velocity ms meandopplervelocity ( time, height ) Receiver...

  3. ARM - VAP Product - pblhtsondeyr1mcfarl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    height Planetary boundary layer height above mean sea level calculated from bulk Richardson number using critical threshold of 0.5 m pblheightbulkrichardsonpt5 ( time )...

  4. ARM - Datastreams - twr

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    qcvaporpressuremean ( time, height ) Quality check results on field: Wind direction vector mean unitless qcwdirvecmean ( time, height ) Quality check results on field: Wind...

  5. Search for: All records | Data Explorer

    Office of Scientific and Technical Information (OSTI)

    ARM: X-SAPR Range Height Indicator scan Widener, Kevin ; Nelson, Dan ; Bharadwaj, Nitin ; Lindenmaier, Iosif ; Collis, Scott X-SAPR Range Height Indicator scan View Dataset January ...

  6. ARM - Data Announcements Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2015 Data Announcements New and Improved Ceilometer Datastream Available Bookmark and Share First cloud base height data are shown above at the various heights at which cloud ...

  7. Heat exchange apparatus

    DOE Patents [OSTI]

    Degtiarenko, Pavel V.

    2003-08-12

    A heat exchange apparatus comprising a coolant conduit or heat sink having attached to its surface a first radial array of spaced-apart parallel plate fins or needles and a second radial array of spaced-apart parallel plate fins or needles thermally coupled to a body to be cooled and meshed with, but not contacting the first radial array of spaced-apart parallel plate fins or needles.

  8. Building America Whole-House Solutions for Existing Homes: Cascade

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Apartments - Deep Energy Multifamily Retrofit (Fact Sheet) | Department of Energy Building America Whole-House Solutions for Existing Homes: Cascade Apartments - Deep Energy Multifamily Retrofit (Fact Sheet) Building America Whole-House Solutions for Existing Homes: Cascade Apartments - Deep Energy Multifamily Retrofit (Fact Sheet) This project implemented energy retrofit improvements in the Cascade multifamily community, which resulted in annual energy cost savings of 22%, improved comfort

  9. Building America Whole-House Solutions for Existing Homes: Conway Street

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Apartments - Greenfield, Massachusetts | Department of Energy Conway Street Apartments - Greenfield, Massachusetts Building America Whole-House Solutions for Existing Homes: Conway Street Apartments - Greenfield, Massachusetts Through recent research efforts, CARB has been evaluating strategies and technologies that can make dramatic improvements in energy performance in multifamily buildings. In this project, the team helped to transform a 100-year-old empty school building into 12 high

  10. Micro-scale mass-transfer variations during electrodeposition

    SciTech Connect (OSTI)

    Sutija, D.P.

    1991-08-01

    Results of two studies on micro-scale mass-transfer enhancement are reported: (1) Profiled cross-sections of striated zinc surfaces deposited in laminar channel flow were analyzed with fast-fourier transforms (FFT) to determine preferred striation wavelengths. Striation frequency increases with current density until a minimum separation between striae of 150 {mu}m is reached. Beyond this point, independent of substrate used, striae meld together and form a relatively smooth, nodular deposit. Substrates equipped with artificial micron-sized protrusions result in significantly different macro-morphology in zinc deposits. Micro-patterned electrodes (MPE) with hemispherical protrusions 5 {mu}m in diameter yield thin zinc striae at current densities that ordinarily produce random nodular deposits. MPEs with artificial hemi-cylinders, 2.5 {mu}m in height and spaced 250 {mu}m apart, form striae with a period which matches the spacing of micron-sized ridges. (2) A novel, corrosion-resistant micromosaic electrode was fabricated on a silicon wafer. Measurements of mass-transport enhancement to a vertical micromosaic electrode caused by parallel bubble streams rising inside of the diffusion boundary-layer demonstrated the presence of two co-temporal enhancement mechanisms: surface-renewal increases the limiting current within five bubble diameters of the rising column, while bubble-induced laminar flows cause weaker enhancement over a much broader swath. The enhancement caused by bubble curtains is predicted accurately by linear superposition of single-column enhancements. Two columns of smaller H{sub 2} bubbles generated at the same volumetric rate as a single column of larger bubbles cause higher peak and far-field enhancements. 168 refs., 96 figs., 6 tabs.

  11. ROTATING MOTIONS AND MODELING OF THE ERUPTING SOLAR POLAR-CROWN PROMINENCE ON 2010 DECEMBER 6

    SciTech Connect (OSTI)

    Su, Yingna; Van Ballegooijen, Adriaan

    2013-02-10

    A large polar-crown prominence composed of different segments spanning nearly the entire solar disk erupted on 2010 December 6. Prior to the eruption, the filament in the active region part split into two layers: a lower layer and an elevated layer. The eruption occurs in several episodes. Around 14:12 UT, the lower layer of the active region filament breaks apart: One part ejects toward the west, while the other part ejects toward the east, which leads to the explosive eruption of the eastern quiescent filament. During the early rise phase, part of the quiescent filament sheet displays strong rolling motion (observed by STEREO-B) in the clockwise direction (viewed from east to west) around the filament axis. This rolling motion appears to start from the border of the active region, then propagates toward the east. The Atmospheric Imaging Assembly (AIA) observes another type of rotating motion: In some other parts of the erupting quiescent prominence, the vertical threads turn horizontal, then turn upside down. The elevated active region filament does not erupt until 18:00 UT, when the erupting quiescent filament has already reached a very large height. We develop two simplified three-dimensional models that qualitatively reproduce the observed rolling and rotating motions. The prominence in the models is assumed to consist of a collection of discrete blobs that are tied to particular field lines of a helical flux rope. The observed rolling motion is reproduced by continuous twist injection into the flux rope in Model 1 from the active region side. Asymmetric reconnection induced by the asymmetric distribution of the magnetic fields on the two sides of the filament may cause the observed rolling motion. The rotating motion of the prominence threads observed by AIA is consistent with the removal of the field line dips in Model 2 from the top down during the eruption.

  12. Laser heterodyne surface profiler

    DOE Patents [OSTI]

    Sommargren, G.E.

    1980-06-16

    A method and apparatus are disclosed for testing the deviation of the face of an object from a flat smooth surface using a beam of coherent light of two plane-polarized components, one of a frequency constantly greater than the other by a fixed amount to produce a difference frequency with a constant phase to be used as a reference, and splitting the beam into its two components. The separate components are directed onto spaced apart points on the face of the object to be tested for smoothness while the face of the object is rotated on an axis normal to one point, thereby passing the other component over a circular track on the face of the object. The two components are recombined after reflection to produce a reflected frequency difference of a phase proportional to the difference in path length of one component reflected from one point to the other component reflected from the other point. The phase of the reflected frequency difference is compared with the reference phase to produce a signal proportional to the deviation of the height of the surface along the circular track with respect to the fixed point at the center, thereby to produce a signal that is plotted as a profile of the surface along the circular track. The phase detector includes a quarter-wave plate to convert the components of the reference beam into circularly polarized components, a half-wave plate to shift the phase of the circularly polarized components, and a polarizer to produce a signal of a shifted phase for comparison with the phase of the frequency difference of the reflected components detected through a second polarizer. Rotation of the half-wave plate can be used for phase adjustment over a full 360/sup 0/ range.

  13. Laser heterodyne surface profiler

    DOE Patents [OSTI]

    Sommargren, G.E.

    1984-06-26

    Method and apparatus are disclosed for testing the deviation of the face of an object from a flat smooth surface using a laser beam having two plane-polarized components, one of a frequency greater than the other to produce a difference frequency with a phase to be used as a reference. The beam also is split into its two components which are directed onto spaced apart points on the face of the object. The object is rotated on an axis coincident with one component as a reference. The other component follows a circular track on the face of the object as the object is rotated. The two components are recombined after reflection to produce a difference frequency having a phase that is shifted in an amount that is proportional to the difference in path length as compared to the reference phase to produce an electrical output signal proportional to the deviation of the height of the surface along the circular track. The output signal is generated by means of a phase detector that includes a first photodetector in the path of the recombined components and a second photodetector in the path of the reference phase. The output signal is dependent on the phase difference of the two photodetector signals. A polarizer, a quarter-wave plate and a half-wave plate are in series in the path of the reference phase. Rotation of the half-wave plate can be used for phase adjustment over a full 360[degree] range for initial calibration of the apparatus. 12 figs.

  14. Austin Energy- Multi-Family Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    The Austin Energy Multi-Family Program provides cash incentives to owners, developers, and property managers of apartments and other multi-family properties for making energy efficiency...

  15. Maryland Heats Up Student Appliance Design Competition

    Broader source: Energy.gov [DOE]

    For the second year in a row, the University of Maryland won the Energy Department's Max Tech and Beyond Design Competition. Learn what set the team's design apart.

  16. Project Reports for Native Village of Unalakleet- 2011 Project

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Native Village of Unalakleet (NVU) project is a feasibility study for a retrofit of a tribally owned three-story 14-apartment complex, located in Unalakleet, Alaska.

  17. Seeing the Light: LED Under-Cabinet and Recessed Downlights

    Broader source: Energy.gov [DOE]

    I moved into my apartment about four years ago. Little by little, I've continued to make improvements that help me save money on my energy bills.

  18. Native Village of Unalakleet- 2011 Project

    Broader source: Energy.gov [DOE]

    The Native Village of Unalakleet (NVU) project is a feasibility study for a retrofit of a tribally owned three-story 14-apartment complex, located in Unalakleet, Alaska.

  19. Category:Utility Rate Impacts on PV Economics By Building Type...

    Open Energy Info (EERE)

    navigation, search Impact of Utility Rates on PV Economics Full Service Restaurant Hospital Large Hotel Large Office Medium Office Midrise Apartment Outpatient Primary School...

  20. San Antonio Better Buildings Partners Recognized for Advancing...

    Office of Environmental Management (EM)

    officials had the opportunity to tour SAHA's, Better Building's showcase project, Marie McGuire Lofts apartments. SAHA expects to save 10% this year on energy costs within...

  1. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... and phosphatidylcholine in a cerebellum mouse brain thin tissue section were ... Distinguishing between features approximately 13 m apart in a cerebellum mouse brain thin ...

  2. Category:Burlington, VT | Open Energy Information

    Open Energy Info (EERE)

    Burlington VT Central Vermont Pub Serv Corp.png SVMidriseApartment Bur... 68 KB SVQuickServiceRestaurant Burlington VT Central Vermont Pub Serv Corp.png...

  3. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    and property managers of apartments and other multi-family properties for making energy efficiency... Eligibility: Commercial, Construction, Multifamily Residential Savings...

  4. Sandia Researchers Win Best Paper Award from the American Institute...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 ... that operates at super- to hypersonic ... The methodology's critical component, apart ...

  5. Idaho Site Workers Continue to Finish D&D Cleanup Projects Under Budget |

    Office of Environmental Management (EM)

    Demolition Project | Department of Energy D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in Demolition Project Idaho Site D&D Crew Uses Specialized Tools to Cut Apart Massive Tank in Demolition Project November 25, 2015 - 12:05pm Addthis A worker employs a thermal lance to cut apart a massive tank so it can be removed from a building slated for demolition at the Idaho Site's Materials and Fuels Complex. A worker employs a thermal lance to cut apart a massive tank so it can

  6. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    programs, are sure to delight big and small. Apart from being fun, these activities teach kids important scientific principles and applications, said science educator Gordon...

  7. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    rental apartment owners. The program is designed to offer rebates on some of the most energy intensive household... Eligibility: Multifamily Residential Savings Category:...

  8. Team Middlebury On How to Create Buildings That Improve Communities...

    Energy Savers [EERE]

    Because of my upbringing in Brooklyn, NY, where electricity flows invisibly throughout apartment buildings and skyscrapers as opposed to solar panels or windmills, I didn't know ...

  9. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Residential Consumption Gas used in private dwellings, including apartments, for heating, air-conditioning, cooking, water heating, and other household uses. Sales Consumers ...

  10. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Residential Price The price of gas used in private dwellings, including apartments, for heating, cooking, water heating, and other household uses. For definitions of related energy ...