Powered by Deep Web Technologies
Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Change Log  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Change Log Change Log Change Log NERSC-8 / Trinity Benchmarks Change Log 09/03/2013 Correction applied to MiniDFT web-page (to remove inconsistency with MiniDFT README). Capability Improvement measurements do not require 10,000 MPI ranks per k-point. 08/06/2013 Various pages have changed to remove "draft" status 08/02/2013 Correction added to FLOP Counts for "Small" Single-Node Miniapplication Tests page 07/12/2013 README files updated for IOR benchmark to correct an error in wording (no code changes); README file updated for osu-micro-benchmarks (OMB) changing the tests required and conditions including reinserting some tests that had been deleted earlier 07/05/2013 README updated for mpimemu benchmark; Revised version of benchmark results spreadsheet (linked on SSP web page);

2

Rotting Logs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

55 March 2, 1946 55 March 2, 1946 Forest Preserve District of Cook County Clayton F. Smith, President Roberts Mann, Superintendent of Conservation ROTTING LOGS There is drama in a rotting log. Apparently lifeless and useless there on the ground, it harbors thousands of living things within and beneath it. Feeding on the wood of the log, living and dying, generation after generation of them, they convert it back into minerals which a fertile healthy forest soil must have. They also add the humus which not only helps the soil to hold its moisture but also aids in making the soil minerals usable as food by plants, including trees. Finally there is nothing left but crumbling punk shot through and through with the hyphae, or roots, of molds and mushrooms. Some of the common lower plant and animal forms found in a rotting log in our forest preserves are these.

3

Log Summarization  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Log Log Summarization and Anomaly Detection for Troubleshooting Distributed Systems Dan Gunter #1 , Brian L. Tierney #2 , Aaron Brown ∗3 , Martin Swany ∗4 , John Bresnahan !5 , Jennifer M. Schopf !6 # Lawrence Berkeley National Laboratory, Berkeley, CA, USA 1 dkgunter@lbl.gov 2 bltierney@lbl.gov ∗ University of Delaware, Newark, DE, USA 3 brown@cis.udel.edu 4 swany@cis.udel.edu ! Argonne National Laboratory, Argonne, IL, USA 5 bresnaha@mcs.anl.gov 6 jms@mcs.anl.gov Abstract- Today's system monitoring tools are capable of detecting system failures such as host failures, OS errors, and network partitions in near-real time. Unfortunately, the same cannot yet be said of the end-to-end distributed software stack. Any given action, for example, reliably transferring a directory of files, can involve a wide range of complex and interrelated actions across multiple pieces

4

Rotting Logs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

441-A January 22, 1972 441-A January 22, 1972 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation ROTTING LOGS Trees are like people. They die from diseases, infections, injuries, burns, drowning, malnutrition, and sometimes just plain old age. Walking through the woods we see, here and there, dead or dying trees of various kinds. For example: a big white oak, with its bark ripped from crown to root, was literally cooked by a bolt of lightning during a summer thunderstorm. In a grove of black oaks, many are dying lingering deaths from infected wounds started years ago when an autumn fire swept through the fallen leaves and scorched the living wood. In a dense forest there are many that have lost the battle for space and sunlight. In some places we see trees that are slowly starving because dashing rains have carried away the fertile topsoil and the trampling feet of picnickers have injured the shallow roots that bring them food.

5

Geothermal Well Logging: Geological Wireline Logs and Fracture...  

Open Energy Info (EERE)

Logging: Geological Wireline Logs and Fracture Imaging Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Geothermal Well Logging: Geological...

6

Logs / Meeting Minutes Index  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Logs / Meeting Minutes Logs / Meeting Minutes This page supplies links to the various logs and meeting minutes that are pertinent to the UES Group. FC Shift Log An ORACLE database tool used by the Floor Coordinators to record events that occur on the Experiment Hall Floor. FC Shift Log (Pubic View) Members of the APS Computer Network can use this link to view the FC Shift Log. MCR Shift Log An ORACLE database tool used by the MCR Operators to record events that occur relating to the operation of the Accelerating Systems. MCR Operator Message History The MCR Operator message for the past 72 hours are recorded for reference. UES Meeting Minutes The weekly User ESH Support group meeting minutes are recorded for reference. Also included are AOD-EOS and AOD-EFO meeting minutes. APS Radiation Safety PnP Committee Minutes

7

Process Deviation Log  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Process Deviation Log 09_0730 Process Deviation Log 09_0730 EOTA - Business Form Document Title: P-010, Process Deviation Process Document Number: Process Deviation Log EOTA Employees Melissa Otero N/A Referenced Documents: Parent Document: F-014 Rev. 11_0316 Approvers: Melissa Otero Document Owner: Elizabeth Sousa Backup Owner: Notify of Changes: A 09_0730 11_0316 Revision History: Rev. Description of Change Intitial Release. Revised log to reflect date/date range that PD is in effect. Removed drop-down menu items. Added ECD, Extension Date and Closed Column. F-014 Process Deviation Log 09_0730 Process Deviation # Date Requestor Departme nt Process # Has PD Occurred ? (Y/N) CAR/PAR # Distributio n Date Estimated Closure Date Extension Date Closed Date Comment PD-001 PD-002 PD-003 PD-004 PD-005 PD-006 PD-007 PD-008 PD-009

8

openhole_logging.indd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

OPENHOLE LOGGING WELL OPENHOLE LOGGING WELL Objective R MOTC has drilled a mostly vertical well that is specifi cally designat- ed for openhole logging tests. It was drilled to 5,400 feet and has approximately 2,350 feet of open hole to test a variety of openhole logging tools. The wellbore is drilled with an 8-1/2" drill bit. The well was originally drilled with a 3% KCL Polymer mud system that seems to work well for stabilizing sensitive shale zones. The lower formations are very compact and should be able to stay open without signifi - cant caving. RMOTC has the capability to recondition this wellbore with a variety of mud types if needed. The openhole section will pass through a variety of ages, formations, and lithologies common to the Rocky Mountain geologic province. The rocks encoun-

9

Logging in to Franklin  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Logging in Logging in Logging in to Franklin Interactive Access You can log in to Franklin using SSH (Secure Shell) with the following command from any UNIX, Linux, FreeBSD, etc. command shell or terminal: % ssh -l username franklin.nersc.gov There are a number of SSH-capable clients available for Windows, Mac, and UNIX/Linux machines. NERSC does not support or recommend any particular client. Franklin has 10 login nodes; you will be randomly connected to one of those 10 when you ssh to franklin.nersc.gov. In all cases it will appear to you as if you are on "franklin.nersc.gov." The login nodes are where you compile codes, submit jobs, and view data. The login nodes on Franklin are directly connected to the internal high-speed "Seastar" network. Because of this you cannot login and work

10

Logging in to Hopper  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Logging in Logging in Logging in to Hopper Interactive Access You can log in to Hopper using SSH (Secure Shell) with the following command from any UNIX, Mac OS X, Linux, FreeBSD, etc. command shell or terminal: ssh -l username hopper.nersc.gov There are several SSH-capable clients available for Windows, Mac, and UNIX/Linux machines. NERSC does not support or recommend any particular client. Hopper has 12 login nodes. You will be randomly connected to one of those 12 when you ssh to hopper.nersc.gov. In all cases it will appear to you as if you are on "hopper.nersc.gov." The login nodes are where you compile codes, submit jobs, and view data. The login nodes on Hopper are "external," meaning they are not directly connected to Hopper's internal high-speed "Gemini" network. Because the

11

NMR logging apparatus  

DOE Patents [OSTI]

Technologies including NMR logging apparatus and methods are disclosed. Example NMR logging apparatus may include surface instrumentation and one or more downhole probes configured to fit within an earth borehole. The surface instrumentation may comprise a power amplifier, which may be coupled to the downhole probes via one or more transmission lines, and a controller configured to cause the power amplifier to generate a NMR activating pulse or sequence of pulses. Impedance matching means may be configured to match an output impedance of the power amplifier through a transmission line to a load impedance of a downhole probe. Methods may include deploying the various elements of disclosed NMR logging apparatus and using the apparatus to perform NMR measurements.

Walsh, David O; Turner, Peter

2014-05-27T23:59:59.000Z

12

Chemical Logging | Open Energy Information  

Open Energy Info (EERE)

Chemical Logging Chemical Logging Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Chemical Logging Details Activities (1) Areas (1) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: Stratigraphic/Structural: Hydrological: Presence and geochemical composition of fluid producing zones Thermal: Calcium-alkalinity ratios versus depth assist in defining warm and hot water aquifers Dictionary.png Chemical Logging: Chemical logging produces a chemical profile of the formation fluid within a well based on the measurement of changes in the chemical composition of the drilling fluid during drilling operations.

13

Category:Neutron Log | Open Energy Information  

Open Energy Info (EERE)

Neutron Log page? For detailed information on Neutron Log, click here. Category:Neutron Log Add.png Add a new Neutron Log Technique Pages in category "Neutron Log" This category...

14

Neutron Log | Open Energy Information  

Open Energy Info (EERE)

Neutron Log Neutron Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Neutron Log Details Activities (4) Areas (4) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: if used in conjunction with other logs, this technique can provide information on the rock type and the porosity Stratigraphic/Structural: Corelation of rock units Hydrological: Estimate of formation porosity Thermal: Dictionary.png Neutron Log: The neutron log responds primarily to the amount of hydrogen in the formation which is contained in oil, natural gas, and water. The amount of hydrogen can be used to identify zones of higher porosity.

15

Grid Logging: Best Practices Guide  

SciTech Connect (OSTI)

The purpose of this document is to help developers of Grid middleware and application software generate log files that will be useful to Grid administrators, users, developers and Grid middleware itself. Currently, most of the currently generated log files are only useful to the author of the program. Good logging practices are instrumental to performance analysis, problem diagnosis, and security auditing tasks such as incident tracing and damage assessment. This document does not discuss the issue of a logging API. It is assumed that a standard log API such as syslog (C), log4j (Java), or logger (Python) is being used. Other custom logging API or even printf could be used. The key point is that the logs must contain the required information in the required format. At a high level of abstraction, the best practices for Grid logging are: (1) Consistently structured, typed, log events; (2) A standard high-resolution timestamp; (3) Use of logging levels and categories to separate logs by detail and purpose; (4) Consistent use of global and local identifiers; and (5) Use of some regular, newline-delimited ASCII text format. The rest of this document describes each of these recommendations in detail.

Tierney, Brian L; Tierney, Brian L; Gunter, Dan

2008-04-01T23:59:59.000Z

16

Image Logs | Open Energy Information  

Open Energy Info (EERE)

Image Logs Image Logs Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Image Logs Details Activities (2) Areas (1) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: Identify different lithological layers, rock composition, grain size, mineral, and clay content Stratigraphic/Structural: -Fault and fracture identification -Rock texture, porosity, and stress analysis -determine dip, thickness, and geometry of rock strata in vicinity of borehole -Detection of permeable pathways, fracture zones, faults Hydrological: Locate zones of aquifer inflow/outflow Thermal:

17

Geotech Logging Services | Open Energy Information  

Open Energy Info (EERE)

Logging Services Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Geotech Logging Services Author Geotech Logging Servces LLC Published Publisher...

18

Gamma Log | Open Energy Information  

Open Energy Info (EERE)

Gamma Log Gamma Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Gamma Log Details Activities (6) Areas (6) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: provides information on changes in rock type near the wellbore from changes in measured gamma radiation Stratigraphic/Structural: using multiple gamma logs over an area, the depth to the sandstone and shale layers can be correlated over larger areas Hydrological: Thermal: Cost Information Low-End Estimate (USD): 0.2525 centUSD 2.5e-4 kUSD 2.5e-7 MUSD 2.5e-10 TUSD / foot Median Estimate (USD): 0.3838 centUSD

19

Density Log | Open Energy Information  

Open Energy Info (EERE)

Density Log Density Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Density Log Details Activities (6) Areas (6) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: provides data on the bulk density of the rock surrounding the well Stratigraphic/Structural: Stratigraphic correlation between well bores. Hydrological: Porosity of the formations loggesd can be calculated for the Density log andprovide an indication potential aquifers. Thermal: Cost Information Low-End Estimate (USD): 0.4040 centUSD 4.0e-4 kUSD 4.0e-7 MUSD 4.0e-10 TUSD / foot Median Estimate (USD): 0.6868 centUSD

20

Acoustic paramagnetic logging tool  

DOE Patents [OSTI]

New methods and apparatus are disclosed which allow measurement of the presence of oil and water in geological formations using a new physical effect called the Acoustic Paramagnetic Logging Effect (APLE). The presence of petroleum in formation causes a slight increase in the earth's magnetic field in the vicinity of the reservoir. This is the phenomena of paramagnetism. Application of an acoustic source to a geological formation at the Larmor frequency of the nucleons present causes the paramagnetism of the formation to disappear. This results in a decrease in the earth3 s magnetic field in the vicinity of the oil bearing formation. Repetitively frequency sweeping the acoustic source through the Larmor frequency of the nucleons present (approx. 2 kHz) causes an amplitude modulation of the earth's magnetic field which is a consequence of the APLE. The amplitude modulation of the earth's magnetic field is measured with an induction coil gradiometer and provides a direct measure of the amount of oil and water in the excitation zone of the formation . The phase of the signal is used to infer the longitudinal relaxation times of the fluids present, which results in the ability in general to separate oil and water and to measure the viscosity of the oil present. Such measurements may be preformed in open boreholes and in cased well bores.

Vail, III, William B. (Bothell, WA)

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Acoustic Logs | Open Energy Information  

Open Energy Info (EERE)

Acoustic Logs Acoustic Logs Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Acoustic Logs Details Activities (7) Areas (6) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: determine porosity of layers Stratigraphic/Structural: map discontinuities to determine their orientation. Hydrological: Thermal: Cost Information Low-End Estimate (USD): 1.00100 centUSD 1.0e-3 kUSD 1.0e-6 MUSD 1.0e-9 TUSD / foot Median Estimate (USD): 4.62462 centUSD 0.00462 kUSD 4.62e-6 MUSD 4.62e-9 TUSD / foot High-End Estimate (USD): 16.001,600 centUSD 0.016 kUSD 1.6e-5 MUSD 1.6e-8 TUSD / foot

22

Mud Logging | Open Energy Information  

Open Energy Info (EERE)

Mud Logging Mud Logging Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Mud Logging Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: Lithological layers are identified from drill cuttings Stratigraphic/Structural: Porosity of rocks Hydrological: Fluid content of the borehole while drilling can be determined Thermal: Cost Information Low-End Estimate (USD): 1,300.00130,000 centUSD 1.3 kUSD 0.0013 MUSD 1.3e-6 TUSD / day Median Estimate (USD): 1,450.00145,000 centUSD 1.45 kUSD 0.00145 MUSD 1.45e-6 TUSD / day High-End Estimate (USD): 2,000.00200,000 centUSD

23

FMI Log | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » FMI Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: FMI Log Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Image Logs Information Provided by Technique Lithology: Identify different lithological layers, rock composition, mineral, and clay content Stratigraphic/Structural: -Fault and fracture identification -Rock texture, porosity, and stress analysis -determine dip and structural features in vicinity of borehole -Detection of permeable pathways, fracture zones, faults Hydrological: Resistivity influenced by porosity, grain size distribution, permeability, fluid saturation, fluid type and phase state of the pore water

24

LOG HAZARD REGRESSION Huiying Sun  

E-Print Network [OSTI]

LOG HAZARD REGRESSION by Huiying Sun Ph.D, Harbin Institute of Technology, Harbin, CHINA, 1991 .................................................................... .................................................................... .................................................................... .................................................................... THE UNIVERSITY OF BRITISH COLUMBIA September, 1999 c flHuiying Sun, 1999 #12; Abstract We propose using

Heckman, Nancy E.

25

Definition: Image Logs | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Image Logs Jump to: navigation, search Dictionary.png Image Logs Well logging techniques which create images of the inside of a borehole. A 360° view camera is used that can be lowered into a borehole via logging cable. The camera's purpose is to provide live images of the borehole walls. View on Wikipedia Wikipedia Definition Well logging, also known as borehole logging is the practice of making a detailed record (a well log) of the geologic formations penetrated by a borehole. The log may be based either on visual inspection of samples brought to the surface (geological logs) or on physical measurements made by instruments lowered into the hole (geophysical logs). Well logging can

26

Caliper Log | Open Energy Information  

Open Energy Info (EERE)

Caliper Log Caliper Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Caliper Log Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: Stratigraphic/Structural: Hydrological: Thermal: Cost Information Low-End Estimate (USD): 0.4040 centUSD 4.0e-4 kUSD 4.0e-7 MUSD 4.0e-10 TUSD / foot Median Estimate (USD): 0.7878 centUSD 7.8e-4 kUSD 7.8e-7 MUSD 7.8e-10 TUSD / foot High-End Estimate (USD): 3.00300 centUSD 0.003 kUSD 3.0e-6 MUSD 3.0e-9 TUSD / foot Time Required Low-End Estimate: 0.35 days9.582478e-4 years 8.4 hours 0.05 weeks 0.0115 months / job

27

Definition: Density Log | Open Energy Information  

Open Energy Info (EERE)

Density Log Density Log Jump to: navigation, search Dictionary.png Density Log Density logging is a well logging tool that can provide a continuous record of a formation's bulk density along the length of a borehole. In geology, bulk density is a function of the density of the minerals forming a rock (i.e. matrix) and the fluid enclosed in the pore spaces.[1] View on Wikipedia Wikipedia Definition Density logging is a well logging tool that can provide a continuous record of a formation's bulk density along the length of a borehole. In geology, bulk density is a function of the density of the minerals forming a rock and the fluid enclosed in the pore spaces. This is one of three well logging tools that are commonly used to calculate porosity, the other two being sonic logging and neutron porosity logging

28

Optical  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optical Optical fiber-based single-shot picosecond transient absorption spectroscopy Andrew R. Cook a͒ and Yuzhen Shen Department of Chemistry, Brookhaven National Laboratory, Upton, New York 11973, USA ͑Received 27 January 2009; accepted 29 May 2009; published online 17 July 2009͒ A new type of single-shot transient absorption apparatus is described based on a bundle of optical fibers. The bundle contains 100 fibers of different lengths, each successively giving ϳ15 ps longer optical delay. Data are collected by imaging light from the exit of the bundle into a sample where it is overlapped with an electron pulse or laser excitation pulse, followed by imaging onto a charge coupled device ͑CCD͒ detector where the intensity of light from each fiber is measured simultaneously. Application to both ultrafast pump-probe spectroscopy and pulse radiolysis is demonstrated. For pulse

29

Optics  

Science Journals Connector (OSTI)

Optical components such as lenses, mirrors and diffraction gratings are widely used in many inspection systems. These include not only those for visual inspection with CCD cameras, but also in areas of distanc...

C. Loughlin

1993-01-01T23:59:59.000Z

30

Internet Data logging and Display  

E-Print Network [OSTI]

. The solution presented here is to accomplish these goals is to include a miniature web server in a remote-logging module, which we designed as part of our device. Thus allowing data to be accessed more frequently, via the Internet. As it currently stands...

Sweeney, J., Jr.; Culp, C.; Haberl, J. S.

2001-01-01T23:59:59.000Z

31

The Impact of the Russian Log Export Tariff on the Global Market for Logs and Lumber  

E-Print Network [OSTI]

in Russia, estimated at 808,790,000 hectares, represents 20.5% of total global forest area and almost halfSharfofLogExports(%) Figure 1. Russian softwood log exports represent over a quarter of total global log exports. SourceThe Impact of the Russian Log Export Tariff on the Global Market for Logs and Lumber CINTRAFOR News

32

Definition: Resistivity Log | Open Energy Information  

Open Energy Info (EERE)

Resistivity Log Resistivity Log Jump to: navigation, search Dictionary.png Resistivity Log Electrical resistivity logging is the measurement of potential (voltage) differences resulting from electrical current flow in the vicinity of a borehole in order to determine formation resistivity.[1] View on Wikipedia Wikipedia Definition Resistivity logging is a method of well logging that works by characterizing the rock or sediment in a borehole by measuring its electrical resistivity. Resistivity is a fundamental material property which represents how strongly a material opposes the flow of electric current. In these logs, resistivity is measured using 4 electrical probes to eliminate the resistance of the contact leads. The log must run in holes containing electrically conductive mud or water. Resistivity logging is

33

Category:Well Log Techniques | Open Energy Information  

Open Energy Info (EERE)

Category Category Edit History Facebook icon Twitter icon » Category:Well Log Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Well Log Techniques page? For detailed information on Well Log Techniques as exploration techniques, click here. Category:Well Log Techniques Add.png Add a new Well Log Techniques Technique Pages in category "Well Log Techniques" The following 17 pages are in this category, out of 17 total. A Acoustic Logs C Caliper Log Cement Bond Log Chemical Logging Cross-Dipole Acoustic Log D Density Log F FMI Log G Gamma Log I Image Logs M Mud Logging N Neutron Log P Pressure Temperature Log R Resistivity Log Resistivity Tomography S Single-Well and Cross-Well Resistivity Spontaneous Potential Well Log Stoneley Analysis

34

Applying multiwell normalization in open hole log analysis  

E-Print Network [OSTI]

A major problem when analyzing open hole well logging data in large fields is the fact that the logs were run using different logging service companies, using different logging tools over a long time span. To obtain correct log interpretations...

Sinanan, Haydn Brent

2012-06-07T23:59:59.000Z

35

Well Log Techniques | Open Energy Information  

Open Energy Info (EERE)

Well Log Techniques Well Log Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Well Log Techniques Details Activities (4) Areas (4) Regions (1) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Downhole Techniques Information Provided by Technique Lithology: depth and thickness of formations; lithology and porosity can be inferred Stratigraphic/Structural: reservoir thickness, reservoir geometry, borehole geometry Hydrological: permeability and fluid composition can be inferred Thermal: direct temperature measurements; thermal conductivity and heat capacity Dictionary.png Well Log Techniques: Well logging is the measurement of formation properties versus depth in a

36

Energy Citations Database (ECD) - Alerts Log On  

Office of Scientific and Technical Information (OSTI)

Log On You must Log On to use the ECD Alerts. Alerts provide users with e-mail notification of updates to the ECD in specific areas of interest. If you wish to receive an Alert and...

37

Vertical Flowmeter Logging | Open Energy Information  

Open Energy Info (EERE)

Flowmeter Logging Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Vertical Flowmeter Logging Author U.S. Geological Survey Published USGS Groundwater...

38

Geological well log analysis. Third ed  

SciTech Connect (OSTI)

Until recently, well logs have mainly been used for correlation, structural mapping, and quantitive evaluation of hydrocarbon bearing formations. This third edition of Geologic Well Log Analysis, however, describes how well logs can be used for geological studies and mineral exploration. This is done by analyzing well logs for numerous parameters and indices of significant mineral accumulation, primarily in sediments. Contents are: SP and Eh curves as redoxomorphic logs; sedimentalogical studies by log curve shapes; exploration for stratigraphic traps; continuous dipmeter as a structural tool; continuous dipmeter as a sedimentation tool; Paleo-facies logging and mapping; hydrogeology 1--hydrodynamics of compaction; hydrogeology 2--geostatic equilibrium; and hydrogeology 3--hydrodynamics of infiltration. Appendixes cover: Computer program for calculating the dip magnitude, azimuth, and the degree and orientation of the resistivity anisotrophy; a lithology computer program for calculating the curvature of a structure; and basic log analysis package for HP-41CV programmable calculator.

Pirson, S.J.

1983-01-01T23:59:59.000Z

39

Definition: Mud Logging | Open Energy Information  

Open Energy Info (EERE)

Mud Logging Mud Logging Jump to: navigation, search Dictionary.png Mud Logging Mud logs enable the geological description and analysis of rock cuttings suspended within the returned drilling mud and can provide a variety of useful information regarding reservoir parameters.[1] View on Wikipedia Wikipedia Definition Mud logging is the creation of a detailed record of a borehole by examining the cuttings of rock or brought to the surface by the circulating drilling medium (most commonly mud). Mud logging is usually performed by a third-party mud logging company. This provides well owners and producers with information about the lithology and fluid content of the borehole while drilling. Historically it is the earliest type of well log. Under some circumstances compressed air is employed as a circulating fluid,

40

University of Florida Cell Phone Usage Log  

E-Print Network [OSTI]

University of Florida Cell Phone Usage Log Information below must be compared to the monthly statement provided by the cell phone service provider. It is required that this log be completed when of the last page of the usage log. Employee's Name:Business Device - Cell Phone Number: Printed Name

Sin, Peter

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

LogOS: an Automatic Logging Framework for Service-Oriented Architectures  

E-Print Network [OSTI]

LogOS: an Automatic Logging Framework for Service-Oriented Architectures Stéphane Frénot Université architecture focuses on service oriented log- ging for component based architecture. It focuses on two providers in cases of failures. We motivate the need for an automatic logging framework in service-oriented

Paris-Sud XI, Université de

42

Spontaneous Potential Well Log | Open Energy Information  

Open Energy Info (EERE)

Spontaneous Potential Well Log Spontaneous Potential Well Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Spontaneous Potential Well Log Details Activities (2) Areas (2) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: SP technique originally applied to locating sulfide ore-bodies. Stratigraphic/Structural: -Formation bed thickness and boundaries -Detection and tracing of faults -Permeability and porosity Hydrological: Determination of fluid flow patterns: electrochemical coupling processes due to variations in ionic concentrations, and electrokinetic coupling processes due to fluid flow in the subsurface.

43

Definition: Gamma Log | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Gamma Log Jump to: navigation, search Dictionary.png Gamma Log Gamma logging is a method of measuring naturally occurring gamma radiation to characterize the rock or sediment in a borehole or drill hole. It is a wireline logging method used in mining, mineral exploration, water-well drilling, for formation evaluation in oil and gas well drilling and for other related purposes. Different types of rock emit different amounts and different spectra of natural gamma radiation.[1] View on Wikipedia Wikipedia Definition Gamma ray logging is a method of measuring naturally occurring gamma radiation to characterize the rock or sediment in a borehole or drill hole. It is a wireline logging method used in mining, mineral exploration,

44

Request Log Closedl Date Yes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6 FOIA 6 FOIA - Request Log Closedl Date Yes 01 127106 Yes 02/23/06 Yes 04/05/06 Yes 04/03/06 Yes 04/03/06 Yes 05/22/06 Yes 35/30/06 - No. - 00 1 - 002 - 003 - 004 005 006 - 307 - Dated 01 125106 0211 6106 03/29/06 03/31 106 14/03/06 1511 8/06 )5/22/06 Date Rec'd 0 I I2 5/06 02/23/06 03130/06 0313 1 106 04/03/06 05/22/06 05/22/06 HQ or Dir. Direct Transfer from HQ Direct Trans from HQ Direct Direct Transfer 'rom HQ Subject Requesting a list of all your Procurement card holders Requesting copies of any and all Freedom of Information Act (FOIA) requests submitted to the Department of Energy (DOE) by Donna Wright, the Bradenton Herald, or any other individual that requested documentation or information pertaining to the Loral American Beryllium Corporation (also known as the

45

Research and Methodological Foundations of Transaction Log  

E-Print Network [OSTI]

approach to data collection and a research method for both system performance and user behavior analysis and users of that system. These log files can come from a variety of computers and systems (Websites interactions. Transaction log analysis is the methodological approach to studying online systems and users

Jansen, James

46

CORRUPTION AND ILLEGAL LOGGING IN THE WOOD  

E-Print Network [OSTI]

CORRUPTION AND ILLEGAL LOGGING IN THE WOOD PRODUCTS MARKET: the Italian experience in controlling% of wood international trade is based on illegal logging; a total value of 150 Billion $/year (OECD Environmental Outlook, 2001) · At least 50% of wood removals in the Amazon basin, Central Africa and South

Pettenella, Davide

47

SOME RESULTS ON SCATTERING FOR LOG-SUBCRITICAL AND LOG-SUPERCRITICAL  

E-Print Network [OSTI]

SOME RESULTS ON SCATTERING FOR LOG-SUBCRITICAL AND LOG-SUPERCRITICAL NONLINEAR WAVE EQUATIONS HSI equations. First, we consider the H1 x ? L2 x scattering theory for the energy log- subcritical wave regularity) Sobolev space. We include also some observation about scattering in the energy subcritical case

Weinberger, Hans

48

Definition: Chemical Logging | Open Energy Information  

Open Energy Info (EERE)

Logging Logging Jump to: navigation, search Dictionary.png Chemical Logging Chemical logging produces a chemical profile of the formation fluid within a well based on the measurement of changes in the chemical composition of the drilling fluid during drilling operations.[1] References ↑ http://www.osti.gov/bridge/servlets/purl/6076582-xtVTIk/6076582.pdf Ret Like Like You like this.Sign Up to see what your friends like. rieved from "http://en.openei.org/w/index.php?title=Definition:Chemical_Logging&oldid=600357" Category: Definitions What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs Linked Data Developer services OpenEI partners with a broad range of international organizations to grow

49

Definition: Cement Bond Log | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Cement Bond Log Jump to: navigation, search Dictionary.png Cement Bond Log A representation of the integrity of the cement job, especially whether the cement is adhering solidly to the outside of the casing. The log is typically obtained from one of a variety of sonic-type tools. The newer versions, called cement evaluation logs, along with their processing software, can give detailed, 360-degree representations of the integrity of the cement job, whereas older versions may display a single line representing the integrated integrity around the casing.[1] Related Terms Acoustic Logs References ↑ Schlumberger Oilfield Glossary Ret LikeLike UnlikeLike You like this.Sign Up to see what your friends like.

50

Energy Citations Database (ECD) - Alerts Log On  

Office of Scientific and Technical Information (OSTI)

ECD Alerts Log On Alerts provide users with e-mail notification of updates to the ECD in specific areas of interest. If you wish to receive an Alert and are not registered, please...

51

Logs Wood Chips Straw Corn Switchgrass  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Clean energy can come from the sun. The energy in wind can make electricity. Bioenergy comes from plants we can turn into fuel. Logs Wood Chips Straw Corn Switchgrass We can use...

52

Logging-while-coring method and apparatus  

DOE Patents [OSTI]

A method and apparatus for downhole coring while receiving logging-while-drilling tool data. The apparatus includes core collar and a retrievable core barrel. The retrievable core barrel receives core from a borehole which is sent to the surface for analysis via wireline and latching tool The core collar includes logging-while-drilling tools for the simultaneous measurement of formation properties during the core excavation process. Examples of logging-while-drilling tools include nuclear sensors, resistivity sensors, gamma ray sensors, and bit resistivity sensors. The disclosed method allows for precise core-log depth calibration and core orientation within a single borehole, and without at pipe trip, providing both time saving and unique scientific advantages.

Goldberg, David S. (New York, NY); Myers, Gregory J. (Cornwall, NY)

2007-11-13T23:59:59.000Z

53

CMLOG: A common message logging system  

SciTech Connect (OSTI)

The Common Message Logging (CMLOG) system is an object-oriented and distributed system that not only allows applications and systems to log data (messages) of any type into a centralized database but also lets applications view incoming messages in real-time or retrieve stored data from the database according to selection rules. It consists of a concurrent Unix server that handles incoming logging or searching messages, a Motif browser that can view incoming messages in real-time or display stored data in the database, a client daemon that buffers and sends logging messages to the server, and libraries that can be used by applications to send data to or retrieve data from the database via the server. This paper presents the design and implementation of the CMLOG system meanwhile it will also address the issue of integration of CMLOG into existing control systems.

Chen, J.; Akers, W.; Bickley, M.; Wu, D.; Watson, W. III [Thomas Jefferson National Accelerator Facility, Newport News, VA (United States). Control Software Group

1997-12-01T23:59:59.000Z

54

Pressure Temperature Log | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Pressure Temperature Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Pressure Temperature Log Details Activities (13) Areas (13) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Well Log Techniques Information Provided by Technique Lithology: Stratigraphic/Structural: Perturbations in temperature or pressure can be indicative of faults or other structural features Hydrological: fluid cirulation, over-pressured zones, and under-pressured zones. Thermal: Temperature profile with depth Cost Information Low-End Estimate (USD): 0.6060 centUSD 6.0e-4 kUSD

55

VEHICLE USAGE LOG Department ________________________________________ Vehicle Homebase ____________________________ Week Ended (Sunday) _________________  

E-Print Network [OSTI]

VEHICLE USAGE LOG Department ________________________________________ Vehicle Homebase (rev. 10/2005-ecb) #12;Vehicle Usage Log Instructions General instructions: The details of the use

Yang, Zong-Liang

56

Manager's Signature Log Privacy Impact Assessment, Office of...  

Energy Savers [EERE]

Manager's Signature Log Privacy Impact Assessment, Office of Science Chicago Office Manager's Signature Log Privacy Impact Assessment, Office of Science Chicago Office Manager's...

57

Well Log Data At Valles Caldera - Redondo Geothermal Area (Shevenell...  

Open Energy Info (EERE)

Area Exploration Technique Well Log Data Activity Date - 1988 Usefulness useful DOE-funding Unknown Exploration Basis The study reports well log data from five wells...

58

Green Energy Resources Inc formerly New York International Log...  

Open Energy Info (EERE)

International Log Lumber Company Jump to: navigation, search Name: Green Energy Resources Inc (formerly New York International Log & Lumber Company) Place: San Antonio, Texas...

59

Pressure Temperature Log At Glass Buttes Area (DOE GTP) | Open...  

Open Energy Info (EERE)

Pressure Temperature Log At Glass Buttes Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Glass Buttes...

60

Cement Bond Log | Open Energy Information  

Open Energy Info (EERE)

Cement Bond Log Cement Bond Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Cement Bond Log Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Acoustic Logs Information Provided by Technique Lithology: Stratigraphic/Structural: Hydrological: Thermal: Cost Information Low-End Estimate (USD): 0.8585 centUSD 8.5e-4 kUSD 8.5e-7 MUSD 8.5e-10 TUSD / foot Median Estimate (USD): 1.25125 centUSD 0.00125 kUSD 1.25e-6 MUSD 1.25e-9 TUSD / foot High-End Estimate (USD): 3.00300 centUSD 0.003 kUSD 3.0e-6 MUSD 3.0e-9 TUSD / foot Time Required Low-End Estimate: 0.35 days9.582478e-4 years 8.4 hours 0.05 weeks 0.0115 months / job

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Combating Illegal LoggingCombating Illegal Logging in Russia:in Russia  

E-Print Network [OSTI]

Combating Illegal LoggingCombating Illegal Logging in Russia:in Russia: Case study ofCase study of PrimorskyPrimorsky RegionRegion AlexeyAlexey MorozovMorozov Greenpeace RussiaGreenpeace Russia http://www region: 2000 #12;RUSSIA Official Responses 7 of July 2000 Head of Nature Resource Committee

62

Combating Illegal LoggingCombating Illegal Logging in Russia:in Russia  

E-Print Network [OSTI]

Combating Illegal LoggingCombating Illegal Logging in Russia:in Russia: Case study ofCase study of PrimorskyPrimorsky RegionRegion AlexeyAlexey MorozovMorozov Greenpeace RussiaGreenpeace Russia #12;Primorsky #12;RUSSIA Official Responses 7 of July 2000 Head of Nature Resource Committee of the Primorsky

63

2011 Daily Log Report #: 2011-00168  

E-Print Network [OSTI]

2011 Daily Log March 2011 Report #: 2011-00168 Reported: 03/31/2011 1237 Occurred: 03/31/2011 1235 Incident: Medical Emergency Location: Outside of Student Union Disposition: Report--Closed Comments: Female transported to hospital by ambulance for medical treatment. Report #: 2011-00167 Reported: 03/31/2011 1116

Boyce, Richard L.

64

2009 Daily Log Report #: 2009-00202  

E-Print Network [OSTI]

2009 Daily Log March 2009 Report #: 2009-00202 Reported: 03/31/09 2045 Occurred: 03/29/09 1400 to 03/30/09 2000 Incident: Theft Location: Lot Q Disposition: Report--Open Comments: GPS System stolen from unlocked vehicle. Report #: 2009-00201 Reported: 03/31/09 1833 Occurred: Same Incident: Fire

Boyce, Richard L.

65

2009 Daily Log Report #: 2009-00269  

E-Print Network [OSTI]

2009 Daily Log April 2009 Report #: 2009-00269 Reported: 04/30/09 1508 Occurred: Same Incident: Traffic Crash Location: Johns Hill Road and Kenton Drive Disposition: Report--Closed Comments: Two vehicle accident; no injuries. Report #: 2009-00268 Reported: 04/30/09 1049 Occurred: Same Incident: Traffic Crash

Boyce, Richard L.

66

2011 Daily Log Report #: 2011-00229  

E-Print Network [OSTI]

2011 Daily Log April 2011 Report #: 2011-00229 Reported: 04/29/2011 2327 Occurred: 04/29/2011 2325 Incident: Medical Emergency Location: University Center Disposition: Report--Closed Comments: Female transported by ambulance to hospital for medical treatment. Report #: 2011-00228 Reported: 04/29/2011 1702

Boyce, Richard L.

67

2010 Daily Log Report #: 2010-00262  

E-Print Network [OSTI]

2010 Daily Log June 2010 Report #: 2010-00262 Reported: 06/30/10 0957 Occurred: 06/24/10 1630 to 0957 Incident: Theft Location: Founders Hall Disposition: Report--Open Comments: Several textbooks stolen from office. No Reportable Activity on 06/29/10 Report #: 2010-00261 Reported: 06/28/10 1720

Boyce, Richard L.

68

2009 Daily Log Report #: 2009-00327  

E-Print Network [OSTI]

2009 Daily Log June 2009 Report #: 2009-00327 Reported: 06/30/09 1118 Occurred: Same Incident: Fire/Smoke Alarm Location: Dorm--Kentucky Hall Disposition: Report--Closed Comments: Alarm activation caused by drywall dust from contractors; fire department responded and cleared the scene. No Reportable Activity

Boyce, Richard L.

69

2011 Daily Log Report #: 2011-00261  

E-Print Network [OSTI]

2011 Daily Log May 2011 Report #: 2011-00261 Reported: 05/31/2011 1300 Occurred: Same Incident: Medical Emergency Location: University Center Disposition: Report--Closed Comments: Male transported to hospital by ambulance for evaluation and treatment. No Reportable Activity on 05/30/2011 No Reportable

Boyce, Richard L.

70

2011 Daily Log Report #: 2011-00295  

E-Print Network [OSTI]

2011 Daily Log June 2011 Report #: 2011-00295 Reported: 6/30/2011 0813 Occurred: 6/29/2011 1430 Incident: Traffic Crash Location: Sidewalk on Plaza Level Disposition: Report--Closed Comments: Single vehicle accident; no injuries. Report #: 2011-00294 Reported: 06/29/2011 1909 Occurred: Same Incident

Boyce, Richard L.

71

2010 Daily Log Report #: 2010-00221  

E-Print Network [OSTI]

2010 Daily Log April 2010 Report #: 2010-00221 Reported: 04/30/10 1034 Occurred: Same Incident: Found/Recovered Property Location: Founders Hall Disposition: Report--Closed Comments: Small purse was found in classroom. Report #: 2010-00220 Reported: 04/30/10 1347 Occurred: 04/30/10 0820 to 0900

Boyce, Richard L.

72

2011 Daily Log Report #: 2011-00317  

E-Print Network [OSTI]

2011 Daily Log July 2011 Report #: 2011-00317 Reported: 07/30/2011 1446 Occurred: 07/30/2011 1435 Incident: Odor Related Complaint Location: Power Plant Disposition: Report--Closed Comments: Subject reported a strange odor emanating from somewhere in the vicinity; fire department responded and cleared

Boyce, Richard L.

73

Navjot's nightmare revisited: logging, agriculture, and biodiversity  

E-Print Network [OSTI]

forests. Conversely, conversion of primary or logged forests to plantation crops, such as oil palm, causes the biodiversity of this region. Our analysis also suggests that, because South- east Asian forests are tightly and replaced with a nonforest landcover (e.g., agriculture including oil palm and rubber, timber plantations

Vermont, University of

74

Monthly Tank Inspection Log Name of Campus  

E-Print Network [OSTI]

Monthly Tank Inspection Log Name of Campus Street Address of Campus City, State, and Zip Code of Campus 1 of 2 1. Facility PBS Registration Number 6. DISTRIBUTE TO : 2. Tank Number 3. Tank Registered(S) Satisfactory Repair or Adjustment Required Not Applicable Additional Comments Attached ABOVEGROUND STORAGE TANK

Rosen, Jay

75

Gamma-Ray Logging Workshop (February 1981)  

Broader source: Energy.gov (indexed) [DOE]

Borehole logging methods for exploration Borehole logging methods for exploration and evaluation o f uranium deposits . Philip H. O d d , Robert F. Bmullad and Carl P. Lathan rej~rinkttl fnlm Mining and Groundwater Geophysiall967 Borehole logging methods for exploration and evaluation of uranium deposits Philip H. Dodd, Robert F. Droullard and Carl P. Lathan US. Atomic Energy Commhwn GmrPd Jtinct&n, Colorado Abstract, M o l e 1 - i s thc geophysical methad mast exten&@ w r t i n the Udtrrd States for exploratio~ md edwtim of wanhi &pod&. dammow lop, C o r n r n d j suppkrnentd with a singbz-pobt msfstailee log, m t l y supply about 80 percent of the bask data for om regerve c W t i o R a d mu& of the w ~ k r 6 . p ~ &ngk inf~nnatio~ Tmck-mounted 'rotmy eqnipmcnt i s EMhmody emphy&& holes usually hwre a nominai b

76

Energy Efficiency in Log Homes | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Energy Efficiency in Log Homes Energy Efficiency in Log Homes Energy Efficiency in Log Homes April 13, 2012 - 11:29am Addthis Consider energy efficiency when designing or purchasing a log home. | Photo courtesy of ©iStockphoto.com/tinabelle Consider energy efficiency when designing or purchasing a log home. | Photo courtesy of ©iStockphoto.com/tinabelle What does this mean for me? Before designing or purchasing a log home, you should consider several factors related to energy efficiency. Log homes may be site-built or pre-cut in a factory for delivery to the site. Some log home manufacturers can also customize their designs. Before designing or purchasing a manufactured log home, you should consider several factors related to energy efficiency. The R-Value of Wood A material's thermal resistance or resistance to heat flow is measured by

77

Energy Efficiency in Log Homes | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Energy Efficiency in Log Homes Energy Efficiency in Log Homes Energy Efficiency in Log Homes April 13, 2012 - 11:29am Addthis Consider energy efficiency when designing or purchasing a log home. | Photo courtesy of ©iStockphoto.com/tinabelle Consider energy efficiency when designing or purchasing a log home. | Photo courtesy of ©iStockphoto.com/tinabelle What does this mean for me? Before designing or purchasing a log home, you should consider several factors related to energy efficiency. Log homes may be site-built or pre-cut in a factory for delivery to the site. Some log home manufacturers can also customize their designs. Before designing or purchasing a manufactured log home, you should consider several factors related to energy efficiency. The R-Value of Wood A material's thermal resistance or resistance to heat flow is measured by

78

Microsoft Word - FOIA Log FY 2001.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 FOIA - Request Log 1 FOIA - Request Log 1 Closed/ Date No. Dated Date Rec'd HQ or Dir. Subject Yes/ 3/29/01 001 02/01/01 02/01/01 01-0021C Transfer AL Copies of all documents including studies and memoranda, which may identify or consider WIPP site in Carlsbad, NM as a potential site for storage or disposal of spent reactor fuel or high-level radioactive wastes 2. All documents including studies, memoranda, hypothesizing, considering, recommending, or suggesting the WIPP site in NM as an alternative site to the Yucca Mountain site in NV. 3. All documents or lists setting forth the alternative sites that may potential be considered by DOE if the Yucca Mountain site is for any reason not selected to be the DOE site receiving high level radioactive waste or spent reactor fuel. If alternative potential sites have

79

Microsoft Word - FOIA Log FY 2002.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FOIA - Request Log FOIA - Request Log 1 Closed/ Date No. Dated Date Rec'd HQ or Dir. Subject Yes/ 1/30/02 001 12/3/02 12/21/02 Richland Transfer Richland Operation Office search for records they located documents originated by the DOE Carlsbad Field Office that may be responsive to Mr. Hongs request. By transfer of this letter they forwarded Mr. Hong request, along with the documents located at Richland to the Carlsbad FOIA Office. CBFO will respond directly to Mr. Hong with a release determination Yes/ 2/13/02 002 1/30/02 1/30/02 Direct Description of request: answers to 1) What is the makeup of the additional 2 MT now bound for WIPP? What sites will come from, in what quantities, and in what form? 2) What type of NEPA documentation will DOE conduct on this additional 2 MT? (Note: Disposal of this material

80

Microsoft Word - FOIA Log FY 2003.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 FOIA - Request Log 3 FOIA - Request Log 1 Closed/ Date No. Dated Date Rec'd HQ or Dir. Subject Yes/ 11/03/03 001 12/16/02 1/7/03 Transfer from HQ Documentation provided identifying all Waste Isolation Pilot Plant contractors and their sub- contractors, as well as the principals for those entities. Yes 2/20/04 002 12/16/02 1/7/03 Transfer from HQ Documentation provided concerning the following Waste Isolation Pilot Plant related items: 1) Notify as to whether any portion of Westinghouse TRU Solutions work has been outsourced or privatized, and identify the outsource contact affected employees, 2) Notify as to whether environmental work done by Westinghouse TRU Solutions has undergone any changes involving position within company structure, management personnel, addition or deletions to scope of

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Acoustic Waveform Logging - Advances In Theory And Application  

E-Print Network [OSTI]

Full-waveform acoustic logging has made significant advances in both theory and application in recent years, and these advances have greatly increased the capability of log analysts to measure the physical properties of ...

Cheng, C. H.

82

Well Log Data At Blue Mountain Geothermal Area (Fairbank & Niggemann...  

Open Energy Info (EERE)

well Deep Blue No. 1. Notes Well log data was collected in Deep Blue No. 1 upon its completion. The logging was conducted by Welaco Well Analysis Corporation. Temperature,...

83

Upland Log Volumes and Conifer Establishment Patterns in Two Northern,  

E-Print Network [OSTI]

conifer recruit densities on these logs and on the surrounding forest floor. We report significantly greater conifer recruit densities on log substrates as compared to the forest floor. Log substrate, height class and substrate for each established individual. Conifer recruit densities on the forest floor

Standiford, Richard B.

84

Using search logs to recommend images to new users  

Science Journals Connector (OSTI)

We make use of search logs provided by the Belga News Agency to recommend images downloaded by previous users to new users. Each search session in the logs consists of a session ID number, the ID of the images which were downloaded at the conclusion ... Keywords: TF.IDF, cosine similarity coefficient, recommendation, relevance feedback, search engines, search logs, still images

Yan Xu; Michael Oakes

2009-09-01T23:59:59.000Z

85

Well log evaluation of natural gas hydrates  

SciTech Connect (OSTI)

Gas hydrates are crystalline substances composed of water and gas, in which a solid-water-lattice accommodates gas molecules in a cage-like structure. Gas hydrates are globally widespread in permafrost regions and beneath the sea in sediment of outer continental margins. While methane, propane, and other gases can be included in the clathrate structure, methane hydrates appear to be the most common in nature. The amount of methane sequestered in gas hydrates is probably enormous, but estimates are speculative and range over three orders of magnitude from about 100,000 to 270,000,000 trillion cubic feet. The amount of gas in the hydrate reservoirs of the world greedy exceeds the volume of known conventional gas reserves. Gas hydrates also represent a significant drilling and production hazard. A fundamental question linking gas hydrate resource and hazard issues is: What is the volume of gas hydrates and included gas within a given gas hydrate occurrence? Most published gas hydrate resource estimates have, of necessity, been made by broad extrapolation of only general knowledge of local geologic conditions. Gas volumes that may be attributed to gas hydrates are dependent on a number of reservoir parameters, including the areal extent ofthe gas-hydrate occurrence, reservoir thickness, hydrate number, reservoir porosity, and the degree of gas-hydrate saturation. Two of the most difficult reservoir parameters to determine are porosity and degreeof gas hydrate saturation. Well logs often serve as a source of porosity and hydrocarbon saturation data; however, well-log calculations within gas-hydrate-bearing intervals are subject to error. The primary reason for this difficulty is the lack of quantitative laboratory and field studies. The primary purpose of this paper is to review the response of well logs to the presence of gas hydrates.

Collett, T.S.

1992-10-01T23:59:59.000Z

86

Well log evaluation of natural gas hydrates  

SciTech Connect (OSTI)

Gas hydrates are crystalline substances composed of water and gas, in which a solid-water-lattice accommodates gas molecules in a cage-like structure. Gas hydrates are globally widespread in permafrost regions and beneath the sea in sediment of outer continental margins. While methane, propane, and other gases can be included in the clathrate structure, methane hydrates appear to be the most common in nature. The amount of methane sequestered in gas hydrates is probably enormous, but estimates are speculative and range over three orders of magnitude from about 100,000 to 270,000,000 trillion cubic feet. The amount of gas in the hydrate reservoirs of the world greedy exceeds the volume of known conventional gas reserves. Gas hydrates also represent a significant drilling and production hazard. A fundamental question linking gas hydrate resource and hazard issues is: What is the volume of gas hydrates and included gas within a given gas hydrate occurrence Most published gas hydrate resource estimates have, of necessity, been made by broad extrapolation of only general knowledge of local geologic conditions. Gas volumes that may be attributed to gas hydrates are dependent on a number of reservoir parameters, including the areal extent ofthe gas-hydrate occurrence, reservoir thickness, hydrate number, reservoir porosity, and the degree of gas-hydrate saturation. Two of the most difficult reservoir parameters to determine are porosity and degreeof gas hydrate saturation. Well logs often serve as a source of porosity and hydrocarbon saturation data; however, well-log calculations within gas-hydrate-bearing intervals are subject to error. The primary reason for this difficulty is the lack of quantitative laboratory and field studies. The primary purpose of this paper is to review the response of well logs to the presence of gas hydrates.

Collett, T.S.

1992-10-01T23:59:59.000Z

87

Cross-Dipole Acoustic Log | Open Energy Information  

Open Energy Info (EERE)

Cross-Dipole Acoustic Log Cross-Dipole Acoustic Log Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Cross-Dipole Acoustic Log Details Activities (1) Areas (1) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Downhole Techniques Exploration Sub Group: Well Log Techniques Parent Exploration Technique: Acoustic Logs Information Provided by Technique Lithology: Stratigraphic/Structural: Rock stress and fracture analysis Hydrological: Use for fracture identification in open and cased holes. Also used for evaluating hydro fracturing/well stimulation effectiveness. Thermal: Dictionary.png Cross-Dipole Acoustic Log: An acoustic logging technique where the acoustic transmitter and receivers are lowered down hole and waveforms that travel through the well mud,

88

Formation Micro-Imager Logs (FMI) | Open Energy Information  

Open Energy Info (EERE)

Formation Micro-Imager Logs (FMI) Formation Micro-Imager Logs (FMI) Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Formation Micro-Imager Logs (FMI) Author Shakeel Ahmed Published Publisher Not Provided, 2013 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Formation Micro-Imager Logs (FMI) Citation Shakeel Ahmed. Formation Micro-Imager Logs (FMI) [Internet]. 2013. [cited 2013/10/09]. Available from: http://petphy.blogspot.com/2011/12/formation-micro-imager-logs-fmi.html Retrieved from "http://en.openei.org/w/index.php?title=Formation_Micro-Imager_Logs_(FMI)&oldid=687994" Categories: References Geothermal References Uncited References What links here Related changes Special pages Printable version Permanent link Browse properties

89

Chemical Logging At Raft River Geothermal Area (1979) | Open Energy  

Open Energy Info (EERE)

Logging At Raft River Geothermal Area (1979) Logging At Raft River Geothermal Area (1979) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Chemical Logging At Raft River Geothermal Area (1979) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Chemical Logging Activity Date 1979 Usefulness useful DOE-funding Unknown Exploration Basis To use new methods to assist geothermal well drilling. Notes Chemical logging resulted in the development of a technique to assist in geothermal well drilling and resource development. Calcium-alkalinity ratios plotted versus drill depth assisted in defining warm and hot water aquifers. Correlations between the calcium-alkalinity log and lithologic logs were used to determine aquifer types and detection of hot water zones

90

Gamma Log At Coso Geothermal Area (1977) | Open Energy Information  

Open Energy Info (EERE)

Gamma Log At Coso Geothermal Area (1977) Gamma Log At Coso Geothermal Area (1977) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Gamma Log At Coso Geothermal Area (1977) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Gamma Log Activity Date 1977 Usefulness not indicated DOE-funding Unknown Notes extensive geophysical logging surveys were conducted: natural gamma and neutron porosity logs indicate gross rock type References Galbraith, R. M. (1 May 1978) Geological and geophysical analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California Goranson, C.; Schroeder, R. (1 June 1978) Static downhole characteristics of well CGEH-1 at Coso Hot Springs, China Lake, California Retrieved from "http://en.openei.org/w/index.php?title=Gamma_Log_At_Coso_Geothermal_Area_(1977)&oldid=510780"

91

Microsoft Word - FOIA Log FY 2007.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

7 FOIA - Request Log 7 FOIA - Request Log 1 Closed/ Date No. Dated Date Rec'd HQ or Dir. Subject Finalized 02/08/07 001 10/05/06 01/08/07 Transfer from DOE- EM-CBC Copies of contract modifications, performance evaluations, task orders and task order proposals related to contract AT30-05EW03000 with Navarro Research and Engineering, Inc. Finalized 01/31/07 002 01/11/07 01/11/07 Direct For a copy of contract DE-AC04-95AL89446 for the period of September 1995 through the end of the contract. Also, if not included in the above, a copy of the special provisions for the contract specifying the role of the CTAC Program Manager as the single point of contact with DOE. Finalized 02/06/07 003 01/31/07 02/05/07 Transfer from DOE/HQ Copies of the U.S. Department of Energy's ten oldest open or pending Freedom of

92

Microsoft Word - FOIA Log FY 2005.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 FOIA - Request Log 5 FOIA - Request Log 1 Closed/ Date No. Dated Date Rec'd HQ or Dir. Subject Yes 02/23/05 001 02/16/05 02/16/05 Direct Copies of the 2004 Modifications to the Westinghouse TRU Solutions contract (No. DE-AC- 04-01AL66444) for the management and operation of the Waste Isolation Pilot Plant. Yes 04/12/05 002 04/11/05 04/11/05 Direct Copies of the scope of work statement for the EE&G Oversight contract for the Waste Isolation Pilot Plant, dated 1999 or 2000 Yes 04/29/05 003 04/20/05 04/20/05 Direct (1) A copy of the Winning Proposal for RFP No. DE-AC04-89AL58309 (A036), entitled Environmental Evaluation Group (EEG) Oversight Contract for the Waste Isolation Pilot Plant. Subject RFO was issued in FY 2001, and we believe the initials contract was awarded to a company named EG&G.

93

Dual excitation acoustic paramagnetic logging tool  

DOE Patents [OSTI]

New methods and apparatus are disclosed which allow measurement of the presence of oil and water in geological formations using a new physical effect called the Acoustic Paramagnetic Logging Effect (APLE). The presence of petroleum in formation causes a slight increase in the earth's magnetic field in the vicinity of the reservoir. This is the phenomena of paramagnetism. Application of an acoustic source to a geological formation at the Larmor frequency of the nucleons present causes the paramagnetism of the formation to disappear. This results in a decrease in the earth's magnetic field in the vicinity of the oil bearing formation. Repetitively frequency sweeping the acoustic source through the Larmor frequency of the nucleons present (approx. 2 kHz) causes an amplitude modulation of the earth's magnetic field which is a consequence of the APLE. The amplitude modulation of the earth's magnetic field is measured with an induction coil gradiometer and provides a direct measure of the amount of oil and water in the excitation zone of the formation. The phase of the signal is used to infer the longitudinal relaxation times of the fluids present, which results in the ability in general to separate oil and water and to measure the viscosity of the oil present. Such measurements may be performed in open boreholes and in cased well bores. The Dual Excitation Acoustic Paramagnetic Logging Tool employing two acoustic sources is also described. 6 figs.

Vail, W.B. III.

1989-02-14T23:59:59.000Z

94

Dual excitation acoustic paramagnetic logging tool  

DOE Patents [OSTI]

New methods and apparatus are disclosed which allow measurement of the presence of oil and water in gelogical formations using a new physical effect called the Acoustic Paramagnetic Logging Effect (APLE). The presence of petroleum in formation causes a slight increase in the earth's magnetic field in the vicinity of the reservoir. This is the phenomena of paramagnetism. Application of an acoustic source to a geological formation at the Larmor frequency of the nucleous present causes the paramagnetism of the formation to disappear. This results in a decrease in the earth's magnetic field in the vicinity of the oil bearing formation. Repetitively frequency sweeping the acoustic source through the Larmor frequency of the nucleons present (approx. 2 kHz) causes an amplitude modulation of the earth's magnetic field which is a consequence of the APLE. The amplitude modulation of the earth's magnetic field is measured with an induction coil gradiometer and provides a direct measure of the amount of oil and water in the excitation zone of the formation. The phase of the signal is used to infer the longitudinal relaxation times of the fluids present, which results in the ability in general to separate oil and water and to measure the viscosity of the oil present. Such measurements may be preformed in open boreholes and in cased well bores. The Dual Excitation Acoustic Paramagnetic Logging Tool employing two acoustic sources is also described.

Vail, III, William B. (Bothell, WA)

1989-01-01T23:59:59.000Z

95

Dewarless Logging Tool - 1st Generation  

SciTech Connect (OSTI)

This report focuses on Sandia National Laboratories' effort to create high-temperature logging tools for geothermal applications without the need for heat shielding. One of the mechanisms for failure in conventional downhole tools is temperature. They can only survive a limited number of hours in high temperature environments. For the first time since the evolution of integrated circuits, components are now commercially available that are qualified to 225 C with many continuing to work up to 300 C. These components are primarily based on Silicon-On-Insulator (SOI) technology. Sandia has developed and tested a simple data logger based on this technology that operates up to 300 C with a few limiting components operating to only 250 C without thermal protection. An actual well log to 240 C without shielding is discussed. The first prototype high-temperature tool measures pressure and temperature using a wire-line for power and communication. The tool is based around the HT83C51 microcontroller. A brief discussion of the background and status of the High Temperature Instrumentation program at Sandia, objectives, data logger development, and future project plans are given.

HENFLING,JOSEPH A.; NORMANN,RANDY A.

2000-08-01T23:59:59.000Z

96

AVO and anisotropy from logs and walkaways  

SciTech Connect (OSTI)

AVO (amplitude versus offset) is the seismic technique used for mapping lithology, and modeling is an important step for successful AVO interpretations. Shear velocity measurements are essential, since AVO attempts to exploit the elastic (as opposed to acoustic) nature of seismic wave propagation. A property of seismic wave propagation not often considered is anisotropy. This is probably because the magnitude of the anisotropy has been difficult to measure, and its effect on AVO is not widely known. New technology is helping to improve AVO modeling. Dipole source shear logging tools can now measure very slow shear velocities, increasing the range of applicability of AVO, and new borehole seismic techniques can measure anisotropy. When integrated, these new measurements provide more detailed information about the elastic moduli that govern wave propagation, and bring the possibility for greater reliability in AVO interpretation. Two examples of ray-trace AVO synthetics are shown to illustrate typical AVO responses and the importance of shear velocity information. An overview of anisotropy is given and a new technique to estimate anisotropy from walkaway surveys (multi-offset VSPs) is described. The log and walkaway measurements are then integrated to study the impact of anisotropy on AVO. First, the effect of anisotropy on Ostrander's shale-sand model is investigated, and second, isotropic and anisotropic ray-trace synthetics are compared. The effect of anisotropy on AVO is found to be significant and may be lead to misinterpretations of AVO anomalies.

Leaney, S.W.; Borland, W.E. (Schlumberger Geophysics Nusantara, Jakarta (Indonesia))

1994-07-01T23:59:59.000Z

97

Green Energy Resources Inc formerly New York International Log Lumber  

Open Energy Info (EERE)

New York International Log Lumber New York International Log Lumber Company Jump to: navigation, search Name Green Energy Resources Inc (formerly New York International Log & Lumber Company) Place San Antonio, Texas Product GRGR aims to export wood fiber fuel, that is environmentally certified, to overseas power generation utilities. References Green Energy Resources Inc (formerly New York International Log & Lumber Company)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Green Energy Resources Inc (formerly New York International Log & Lumber Company) is a company located in San Antonio, Texas . References ↑ "Green Energy Resources Inc (formerly New York International Log & Lumber Company)"

98

Image Logs At Coso Geothermal Area (2011) | Open Energy Information  

Open Energy Info (EERE)

Image Logs At Coso Geothermal Area (2011) Image Logs At Coso Geothermal Area (2011) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Image Logs At Coso Geothermal Area (2011) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Image Logs Activity Date 2011 Usefulness useful DOE-funding Unknown Exploration Basis Determine crustul stress heterogeneity Notes Borehole induced structures in image logs of wells from the Coso Geothermal Field (CGF) record variation in the azimuth of principal stress. Image logs of these structures from five wells were analyzed to quantify the stress heterogeneity for three geologically distinct locations: two wells within the CGF (one in an actively produced volume), two on the margin of the CGF and outside the production area, and a control well several tens of km

99

Micro-Conductivity Imager Logging Tool | Open Energy Information  

Open Energy Info (EERE)

Micro-Conductivity Imager Logging Tool Micro-Conductivity Imager Logging Tool Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Micro-Conductivity Imager Logging Tool Author Hemisphere Technologies Published Publisher Not Provided, 2011 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Micro-Conductivity Imager Logging Tool Citation Hemisphere Technologies. Micro-Conductivity Imager Logging Tool [Internet]. 2011. [cited 2013/10/09]. Available from: http://www.hemisphereoil.com/mcit.html Retrieved from "http://en.openei.org/w/index.php?title=Micro-Conductivity_Imager_Logging_Tool&oldid=687995" Categories: References Geothermal References Uncited References What links here Related changes Special pages Printable version Permanent link

100

Chemical logging- a geothermal technique | Open Energy Information  

Open Energy Info (EERE)

logging- a geothermal technique logging- a geothermal technique Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Proceedings: Chemical logging- a geothermal technique Details Activities (1) Areas (1) Regions (0) Abstract: Chemical logging studies conducted at the Department of Energy's Raft River Geothermal Test Site in south central Idaho resulted in the development of a technique to assist in geothermal well drilling and resource development. Calcium-alkalinity ratios plotted versus drill depth assisted in defining warm and hot water aquifers. Correlations between the calcium-alkalinity log and lithologic logs were used to determine aquifer types and detection of hot water zones 15 to 120 m before drill penetration. INEL-1 at the Idaho National Engineering Laboratory site in

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Acoustic Logs At Coso Geothermal Area (2005) | Open Energy Information  

Open Energy Info (EERE)

Coso Geothermal Area (2005) Coso Geothermal Area (2005) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Acoustic Logs Activity Date 2005 Usefulness not indicated DOE-funding Unknown Exploration Basis Well bore fracture analysis Notes Electrical and acoustic image logs have been collected from well 58A-10 in crystalline rock on the eastern margin. Electrical image logs appear to be sensitive to variations in mineralogy, porosity, and fluid content that highlight both natural fractures and rock fabrics. These fabric elements account for about 50% of the total population of planar structures seen in the electrical image log, but locally approach 100%. Acoustic image logs reveal a similar natural fracture population, but generally image slightly fewer fractures, and do not reveal rock fabric. Both logs also record

102

A lower bound for routing on a completely connected optical communication parallel computer  

SciTech Connect (OSTI)

The task of routing a 2-relation on an n-processor completely connected optical communication parallel computer (OCPC) is considered. A lower bound is presented that applies to any randomized distributed algorithm for this task: specifically, it is shown that the expected number of steps required to route a 2-relation is {Omega}({radical} log log n) in the worst case. For comparison, the best upper bound known is O(log log n).

Goldberg, L.A. [Sandia National Labs., Albuquerque, NM (United States); Jerrum, M. [Edinburgh Univ. (United Kingdom). Dept. of Computer Science; MacKenzie, P.D. [Texas Univ., Austin, TX (United States). Dept. of Computer Sciences

1993-08-03T23:59:59.000Z

103

Western tight gas sands advanced logging workshop proceedings  

SciTech Connect (OSTI)

An advanced logging research program is one major aspect of the Western Tight Sands Program. Purpose of this workshop is to help BETC define critical logging needs for tight gas sands and to allow free interchange of ideas on all aspects of the current logging research program. Sixteen papers and abstracts are included together with discussions. Separate abstracts have been prepared for the 12 papers. (DLC)

Jennings, J B; Carroll, Jr, H B [eds.

1982-04-01T23:59:59.000Z

104

Induction log analysis of thinly laminated sand/shale formation  

SciTech Connect (OSTI)

The author examines induction log responses to a thinly laminated sand/shale sequence in a deviated borehole for arbitrary deviation (or dip) angle and sand/shale composition. He found that the induction log responses in a thinly laminated sand/shale sequence are the same as they would be if the tool is placed in a homogeneous but anisotropic formation with the horizontal and vertical conductivities given respectively by the parallel and the series conductivities of the sequence. Conversely, a thinly laminated sand/shale sequence can be identified as an anisotropic formation by induction logs. He discusses three methods to identify an anisotropic formation using induction-type logs alone.

Hagiwara, T. [Shell Development Co., Houston, TX (United States)

1995-06-01T23:59:59.000Z

105

Pressure Temperature Log At Fish Lake Valley Area (DOE GTP) ...  

Open Energy Info (EERE)

Fish Lake Valley Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Fish Lake Valley Area (DOE GTP)...

106

NMOCD - Form G-105 - Geothermal Resources Well Log | Open Energy...  

Open Energy Info (EERE)

Well Log Author State of New Mexico Energy and Minerals Department Published New Mexico Oil Conservation Division, 1978 DOI Not Provided Check for DOI availability: http:...

107

Evaluation of Emerging Technology for Geothermal Drilling and Logging Applications  

Broader source: Energy.gov [DOE]

Evaluation of Emerging Technology for Geothermal Drilling and Logging Applications presentation at the April 2013 peer review meeting held in Denver, Colorado.

108

Geophysical logs from water wells in the Yakima area, Washington  

SciTech Connect (OSTI)

The logs include: natural gamma, gamma gamma, neutron neutron, neutron gamma, caliper, fluid temperature, fluid resistivity, wall resistivity, spontaneous potential, and flow meter.

Biggane, J.H.

1983-01-01T23:59:59.000Z

109

COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO...  

Open Energy Info (EERE)

to permeability in the reservoir. Acoustic image logs reveal a similar natural fracture population, but generally image slightly fewer fractures, and do not reveal rock...

110

Well Log Data At North Brawley Geothermal Area (Matlick & Jayne...  

Open Energy Info (EERE)

to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Well Log Data At North Brawley Geothermal Area (Matlick & Jayne, 2008) Exploration Activity Details...

111

Pressure Temperature Log At Fort Bliss Area (DOE GTP) | Open...  

Open Energy Info (EERE)

Fort Bliss Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Fort Bliss Area (DOE GTP) Exploration...

112

Drag reduction in coal log pipelines  

SciTech Connect (OSTI)

It is well-known that solutions of dissolved long-chain macromolecules produce lower friction or drag losses than with the solvent alone. In coal log pipeline (CLP), water is the conveying medium. Synthetic polymers such as poly(ethylene oxide) have been dissolved in water and tested for their extent of drag reduction as a function of concentration and other variables. Lab-scale experimental results for CLP indicate substantial drag reduction at low concentration levels of polymer. But, the macromolecules exhibit degradation under mechanical shear stresses. The large molecules break into smaller units. This degradation effect causes a loss of drag reduction. However, high levels of drag reduction can be maintained as follows: (1) by injecting polymer into the CLP at several locations along the pipeline, (2) by injecting polymer of different particle sizes, (3) by using more robust types of polymers, or (4) by using polymer-fiber mixtures. This report presents the value of drag-reducing agents in terms of pumping power net cost savings. In addition, this report outlines the environmental impact of drag reduction polymers, and end-of-pipeline water treatment processes. For an operating CLP, hundreds of miles in length, the use of poly(ethylene oxide) as a drag reducing agent provides significant pumping power cost savings at a minimal materials cost.

Marrero, T.R.; Liu, H. [Univ. of Missouri, Columbia, MO (United States). Capsule Pipeline Research Center

1996-12-31T23:59:59.000Z

113

Film Badge Application Radioactive Material Package Receipt Log  

E-Print Network [OSTI]

;RADIOACTIVE MATERIAL PACKAGE RECEIPT LOG DATE: DELIVERED BY: AUTHORIZED BY: Contamination Check DPM/100 cm2APPENDIX A Film Badge Application Radioactive Material Package Receipt Log Radioactive Material Package Receipt Form (Off-Campus Locations) Radiation / Contamination Survey Form #12;PERSONNEL MONITORING

Slatton, Clint

114

Synthetic logs generator for fraud detection in mobile transfer services  

E-Print Network [OSTI]

Synthetic logs generator for fraud detection in mobile transfer services Chrystel Gaber, Baptiste to commit crimes and avoid detection, research in the field of fraud is always evolving. However, trans synthetic logs with real ones. I. INTRODUCTION Frauds in the field of electronic payment evolve contin

Paris-Sud XI, Université de

115

Image Logs At Coso Geothermal Area (2004) | Open Energy Information  

Open Energy Info (EERE)

Logs At Coso Geothermal Area (2004) Logs At Coso Geothermal Area (2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Image Logs At Coso Geothermal Area (2004) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Image Logs Activity Date 2004 Usefulness not indicated DOE-funding Unknown Exploration Basis EGS potential of Coso Geothermal Region Notes During the second year of this project, wellbore logs and stress data were acquired in a new production well drilled in the Coso Geothermal Field, 38C-9. The image analysis results include the discrimination of natural from drilling induced fractures in wellbore image data, natural fracture characterization, and wellbore failure analysis References Sheridan, J.; Hickman, S.H. (1 January 2004) IN SITU STRESS,

116

Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation-  

Open Energy Info (EERE)

Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Details Activities (6) Areas (1) Regions (0) Abstract: This paper presents the results of analysis of a state of the art set of wireline petrophysical and wellbore image logs recorded in the Alum 25-29 well, southwestern Nevada. The Alum well penetrated nearly 2000 ft (610 m) of volcano-clastic rocks and more than 1000 ft of basement, separated from the sediments by a shallowly dipping detachment fault. The logs were acquired both to characterize the site and also to select the

117

Log Homes in REScheck | Building Energy Codes Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Log Homes in REScheck Log Homes in REScheck This training includes an introduction to how log homes are handled in the REScheck(tm) software and demonstrates how to show compliance for log homes using REScheck. Estimated Length: 56 minutes Presenters: Rob Picket, Log Homes Council Heather Dillon and Pam Cole, Pacific Northwest National Laboratory Original Webcast Date: Thursday, February 16, 2006 - 13:00 CEUs Offered: 1.0 AIA/CES LU (HSW); .10 CEUs towards ICC renewal certification. Course Type: Video Downloads: Presentation Slides Video Watch on YouTube Visit the BECP Online Training Center for instructions on how to obtain a certificate of completion. Building Type: Residential Focus: Compliance Code Version: International Energy Conservation Code (IECC) Software: REScheck Target Audience:

118

Geothermal well log interpretation state of the art. Final report  

SciTech Connect (OSTI)

An in-depth study of the state of the art in Geothermal Well Log Interpretation has been made encompassing case histories, technical papers, computerized literature searches, and actual processing of geothermal wells from New Mexico, Idaho, and California. A classification scheme of geothermal reservoir types was defined which distinguishes fluid phase and temperature, lithology, geologic province, pore geometry, salinity, and fluid chemistry. Major deficiencies of Geothermal Well Log Interpretation are defined and discussed with recommendations of possible solutions or research for solutions. The Geothermal Well Log Interpretation study and report has concentrated primarily on Western US reservoirs. Geopressured geothermal reservoirs are not considered.

Sanyal, S.K.; Wells, L.E.; Bickham, R.E.

1980-01-01T23:59:59.000Z

119

Acoustic Logs At Coso Geothermal Area (1977) | Open Energy Information  

Open Energy Info (EERE)

Coso Geothermal Area (1977) Coso Geothermal Area (1977) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Acoustic Logs At Coso Geothermal Area (1977) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Acoustic Logs Activity Date 1977 Usefulness not indicated DOE-funding Unknown Notes Acoustic logs indicate fractured rock and potentially permeable zones. References Galbraith, R. M. (1 May 1978) Geological and geophysical analysis of Coso Geothermal Exploration Hole No. 1 (CGEH-1), Coso Hot Springs KGRA, California Goranson, C.; Schroeder, R. (1 June 1978) Static downhole characteristics of well CGEH-1 at Coso Hot Springs, China Lake, California Retrieved from "http://en.openei.org/w/index.php?title=Acoustic_Logs_At_Coso_Geothermal_Area_(1977)&oldid=510216"

120

Well Logging Security Initiatives | Y-12 National Security Complex  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

by this browser. Download video Captions: On Watch as GTRI demonstrates the threat to the security of (oil) well logging systems and outlines the initiatives that are enhancing the...

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Lightweight Indexing of Observational Data in Log-Structured Storage  

E-Print Network [OSTI]

with similar properties, such as process monitoring in manufacturing. 1. INTRODUCTION Humankind has a rapidly-store) is amenable to han- dling such write-intensive scenarios. A log-store appends newly arrived data to the end

Ooi, Beng Chin

122

TRUTH & CONSEQUENCES... LOG 437/537: MODEL-THEORETIC SEMANTICS  

E-Print Network [OSTI]

TRUTH & CONSEQUENCES... LOG 437/537: MODEL-THEORETIC SEMANTICS Spring 2013, TT 11:45am-1:00pm Dr and compactness of first-order logic and introduce along the way the basic notions of structure, truth

Liu, Paul

123

Determination of lithology from well logs using a neural network  

SciTech Connect (OSTI)

The authors have developed a computer program to automatically determine lithologies from well logs using a back-propagation neural network. Unlike a conventional serial computer, a neural network is a computational system composed of nodes (sometimes called neurons, neurodes, or units) and the connections between these nodes. Neural computing attempts to emulate the functions of the mammalian brain, thus mimicking thought processes. The neural network approach differs from previous pattern recognition methods in its ability to learn from examples. Unlike conventional statistical methods, this new approach does not require sophisticated mathematics and a large amount of statistical data. This paper discusses the application of neural networks to a pattern recognition problem in geology: the determination of lithology from well logs. The neural network determined the lithologies (limestone, dolomite, sandstone, shale, sandy and dolomitic limestones, sandy dolomite, and shale sandstone) from selected well logs in a fraction of the time required by an experienced human log analyst.

Rogers, S.J.; Fang, J.H. (Univ. of Alabama, Tuscaloosa (United States)); Karr, C.L.; Stanley, D.A. (Bureau of Mines, Tuscaloosa, AL (United States))

1992-05-01T23:59:59.000Z

124

Heuristic search method for optimal zonation of well logs  

SciTech Connect (OSTI)

Optimal zonation of well-log data, that is, determining an optimal number of major segments such as waveforms in a log, may be achieved by employing a criterion of minimum variance (within a segment) and a heuristic search of potential boundary (link) points of digitized log data. This new method is based on an algorithm originally devised by D.M. Hawkins and D.F. Merriam in 1973. Their method can be improved by introducing a heuristic search procedure, thereby decreasing computer time by 7- to 50-fold, depending on the number of data points and configuration of the logs. Time saving is proportional to the size of the data set. Three examples - one hypothetical and two real-are used to illustrate the modification of the Hawkins and Merriam algorithm.

Chen, H.C.; Fang, J.H.

1986-07-01T23:59:59.000Z

125

Logging, Testing and Monitoring Geothermal Wells | Open Energy Information  

Open Energy Info (EERE)

Logging, Testing and Monitoring Geothermal Wells Logging, Testing and Monitoring Geothermal Wells Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Logging, Testing and Monitoring Geothermal Wells Abstract Wells or boreholes are essential components in both geothermal research and utilization as they enable a drastic increase in geothermal energy production beyond natural out-flow as well as providing access deep into the systems, not otherwise possible. Wells also play a vital role in all geothermal reservoir physics (also called reservoir engineering) research, which would be particularly ineffec-tive without the access into geothermal systems provided by wells. During drilling the main reservoir physics research is performed through logging of different parameters as functions

126

Fluid-Rock Characterization and Interactions in NMR Well Logging  

SciTech Connect (OSTI)

The objective of this project was to characterize the fluid properties and fluid-rock interactions which are needed for formation evaluation by NMR well logging. NMR well logging is finding wide use in formation evaluation. The formation parameters commonly estimated were porosity, permeability, and capillary bound water. Special cases include estimation of oil viscosity, residual oil saturation, location of oil/water contact, and interpretation on whether the hydrocarbon is oil or gas.

Hirasaki, George J.; Mohanty, Kishore K.

2003-02-10T23:59:59.000Z

127

Two-level expert system for well-log correlation  

SciTech Connect (OSTI)

One limitation of conventional (either manual or machine) well-log correlation is that correlation loops do not close; that is, different correlations result depending on the order in which logs are matched. The authors have devised a two-level expert system for a well-log correlation which addresses this nonclosure problem. The first level of the expert system uses heuristic rules to determine zone attributes and degree of matching. The zones or segments of logs are predetermined either by eye or by any zonation algorithm. The second level of the system deals with machine learning and dynamic programming (an optimization technique that uses recursion to find best matches). A set of optimal weights is obtained through machine learning. These weights subsequently will be used in a dynamic programming technique. Training sets for machine learning are selected to reflect geologic settings of the region. Dynamic programming is then used to match the individual zones of logs, which may exhibit gaps, repetitions, and/or thickening-thinning. Five examples having the following features will be illustrated in the poster session: anticline, unconformity, reverse fault, normal fault with an anticline, and growth fault. The first four are made up of synthetic logs, and the fifth is a real-world example of a Gulf Coast growth fault having an extra layer on the downthrown side.

Mahmoud, W.; Chen, H.C.; Shultz, A.W.; Fang, J.H.

1989-03-01T23:59:59.000Z

128

XLOGS: An expert system for environmental interpretation of wireline logs  

SciTech Connect (OSTI)

Wireline logs provide information on vertical sequences that can be useful for preliminary interpretation of depositional environments. Although the specific causes of any log response are related to many factors, including lithology, density, and pore fluid, geologists often can gain a general impression of vertical heterogeneity, cyclicity, and gradation without performing a rigorous petrophysical analysis of log responses. The authors have attempted to model these heuristics of well logs in a computer program - XLOGS - that emphasizes pattern recognition and fuzzy logic. XLOGS begins with segmentation of a given digitized log in interactive graphical mode. Next, the log shape is characterized by comparison with a set of type motifs, such as straight, serrated, funnel, and bell shapes. Shapes are described in terms of numerical attributes such as amplitude and slope. By using fuzzy values to express membership, any shape can be described. Related subenvironments can be recognized from characteristic vertical sequences, such as the upward-coarsening prograding delta lobe that produces a funnel-shaped mouth-bar segment above a straight to serrated prodelta segment. Variability in the depth scale is accommodated by iterative segmentation; trials with coarser or finer segmentation can be evaluated as alternative interpretations for distinguishing sequence and parasequence boundaries.

Shultz, A.W.; Fang, J.H.; Chen, H.C. (Univ. of Alabama, Tuscaloosa (United States))

1991-03-01T23:59:59.000Z

129

Data Compendium for the Logging Test Pits at the ERDA Grand Junction...  

Broader source: Energy.gov (indexed) [DOE]

Data Compendium for the Logging Test Pits at the ERDA Grand Junction Compound (December 1975) Data Compendium for the Logging Test Pits at the ERDA Grand Junction Compound...

130

Connect & Log In | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Account Information Accounts and Access FAQ Connect & Log In Using CRYPTOCards SSH Keys on Surveyor Disk Space Quota Management Allocations Decommissioning of BG/P Systems and Resources Blue Gene/Q Versus Blue Gene/P Mira/Cetus/Vesta Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Connect & Log In Users log into ALCF resources via ssh. ssh mira.alcf.anl.gov -l Resources that are accessible via ssh are vesta.alcf.anl.gov, mira.alcf.anl.gov, surveyor.alcf.anl.gov, intrepid.alcf.anl.gov, cetus.alcf.anl.gov, challenger.alcf.anl.gov, tukey.alcf.anl.gov, eureka.alcf.anl.gov, and gadzooks.alcf.anl.gov.

131

Acoustic Logs At Raft River Geothermal Area (1979) | Open Energy  

Open Energy Info (EERE)

Raft River Geothermal Area (1979) Raft River Geothermal Area (1979) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Acoustic Logs Activity Date 1979 Usefulness useful DOE-funding Unknown Exploration Basis To permit the lateral and vertical extrapolation of core and test data and bridged the gap between surface geophysical data and core analyses. Notes Televiewer logs permitted the location and orientation of numerous fractures and several features that may be faults. References Keys, W. S.; Sullivan, J. K. (1 June 1979) Role of borehole geophysics in defining the physical characteristics of the Raft River geothermal reservoir, Idaho Retrieved from "http://en.openei.org/w/index.php?title=Acoustic_Logs_At_Raft_River_Geothermal_Area_(1979)&oldid=473816"

132

Ultrasonic logging in cased boreholes for corrosion evaluation  

SciTech Connect (OSTI)

The UltraSonic Imager (USI) is a wireline tool used for cement and casing evaluation. The USI tool uses a rotating ultrasonic transducer to give full coverage of the casing at high resolution. Each measurement made by the tool is presented with its associated color image. For corrosion applications, the most important of these measurements are casing internal radius and thickness. The color image format can be used to determine metal loss percentage, but also plays a key role in quality control to validate the characteristics of the log. The Bureau of Land Management has recently instructed operators in the Imperial Valley to perform casing integrity testing on geothermal injection wells sufficiently past the zones of fresh water to prevent contamination. Wireline logging with the USI tool is currently being used to perform the casing evaluations. Field examples illustrate results of the corrosion, mechanical wear, and internal scale deposits detected from the logs. Recovered casing is shown to validate the tool response.

Woods, T. [Schlumberger Well Services, Signal Hill, CA (United States)

1995-12-31T23:59:59.000Z

133

Multi-rate flowing Wellbore electric conductivity logging method  

SciTech Connect (OSTI)

The flowing wellbore electric conductivity logging method involves the replacement of wellbore water by de-ionized or constant-salinity water, followed by constant pumping with rate Q, during which a series of fluid electric conductivity logs are taken. The logs can be analyzed to identify depth locations of inflow, and evaluate the transmissivity and electric conductivity (salinity) of the fluid at each inflow point. The present paper proposes the use of the method with two or more pumping rates. In particular it is recommended that the method be applied three times with pumping rates Q, Q /2, and 2Q. Then a combined analysis of the multi-rate data allows an efficient means of determining transmissivity and salinity values of all inflow points along a well with a confidence measure, as well as their inherent or far-field pressure heads. The method is illustrated by a practical example.

Tsang, Chin-Fu; Doughty, Christine

2003-04-22T23:59:59.000Z

134

VerSum: Verifiable Computations over Large Public Logs Jelle van den Hooff  

E-Print Network [OSTI]

blockchains, or a Certificate Transparency log. VERSUM clients ensure that the output is correct by comparing

Gummadi, Ramakrishna

135

Log-periodic oscillations of transverse momentum distributions  

E-Print Network [OSTI]

Large p_T transverse momentum distributions exhibit apparently a power-like behavior. We argue that, under closer inspection, this behavior is in fact decorated with some log-periodic oscillations. Assuming that this is genuine effect and not experimental artefact, it suggests that either the exponent of the power-like behavior is in reality complex number or that there is a scale parameter which exhibits specific log-eriodic oscillations. This problem is discussed using Tsallis distributions with scale parameter being a temperature T. At this stage we consider both possibilities on equal footing.

Grzegorz Wilk; Zbigniew Wlodarczyk

2014-03-14T23:59:59.000Z

136

Synthetic logs generator for fraud detection in mobile transfer services  

E-Print Network [OSTI]

Synthetic logs generator for fraud detection in mobile transfer services C. Gaber12 , B. Hemery2.gaber,mohammed.achemlal}@orange.com Abstract. This article presents a simulator which generates synthetic data for fraud detection. It models fraudsters and legitimate users. Keywords: synthetic data, simulation, fraud detection Mobile payments become

Boyer, Edmond

137

Ethics, Logs and Videotape: Ethics in Large Scale User Trials  

E-Print Network [OSTI]

Ethics, Logs and Videotape: Ethics in Large Scale User Trials and User Generated Content Abstract ethical responsibilities we have towards participants. This workshop brings together researchers to discuss the ethical issues of running large-scale user trials, and to provide guidance for future research

Paris-Sud XI, Université de

138

Subsistence Halibut Community Harvest Log Page 1 of 4  

E-Print Network [OSTI]

-0512, Expiration date: 07/31/2014 Subsistence Halibut Community Harvest Permit (CHP) Log U.S. Dept of Commerce-1668 Telephone: 1-800-304-4846 FAX: 907-586-7354 BLOCK A ­ CHP COORDINATOR 1. Name of CHP Coordinator 2. Signature of CHP Coordinator BLOCK B -- SUBSISTENCE FISHER IDENTIFICATION 1. Name of Fisher (First, Middle

139

Borehole logging for uranium by measurement of natural ?-radiation  

Science Journals Connector (OSTI)

?-Ray measurements have been made in boreholes since 1939, for the purpose of detecting the radiation from naturally occuring radioelements in rocks. Logs of the ?-radiation in boreholes have evolved to their present acceptance as a quantitative measurement of uranium concentration for uranium exploration and mining development projects. Many factors influence these ?-ray measurements and consequently new methods of overcoming previous problems have had to be developed. Calibration facilities with model holes have been established in several countries to support quantitative borehole measurements. New high density detector materials have been evaluated and have shown to yield considerable improvements for operation in the restricted environment of the borehole. ?-Ray spectral logging has become available partially as a result of spin-off from parallel developments in surface and airborne ?-ray spectrometric survey equipment. The use of the high resolution solid state detector has proceeded through a series of developments to its present availability as a commercial borehole logging service in spite of the inherent detector cooling problems. Digital measurements are replacing the earlier analog measurements, and minicomputer- or micro processor-based logging systems have enabled new data processing techniques such as inverse filtering, to be implemented in real time at the site of the borehole.

P.G. Killeen

1983-01-01T23:59:59.000Z

140

Dataset Descriptions and Results Various StatLog partners  

E-Print Network [OSTI]

9 Dataset Descriptions and Results Various StatLog partners See Appendix C for a full list 1 9.1 INTRODUCTION We group the dataset results according to domain type, although this distinction is perhaps arbitrary at times. There are three credit datasets, of which two follow in the next section; the third

Taylor, Charles C.

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Fluid-Rock Characterization and Interactions in NMR Well Logging  

SciTech Connect (OSTI)

The objective of this report is to characterize the fluid properties and fluid-rock interactions that are needed for formation evaluation by NMR well logging. The advances made in the understanding of NMR fluid properties are summarized in a chapter written for an AAPG book on NMR well logging. This includes live oils, viscous oils, natural gas mixtures, and the relation between relaxation time and diffusivity. Oil based drilling fluids can have an adverse effect on NMR well logging if it alters the wettability of the formation. The effect of various surfactants on wettability and surface relaxivity are evaluated for silica sand. The relation between the relaxation time and diffusivity distinguishes the response of brine, oil, and gas in a NMR well log. A new NMR pulse sequence in the presence of a field gradient and a new inversion technique enables the T{sub 2} and diffusivity distributions to be displayed as a two-dimensional map. The objectives of pore morphology and rock characterization are to identify vug connectivity by using X-ray CT scan, and to improve NMR permeability correlation. Improved estimation of permeability from NMR response is possible by using estimated tortuosity as a parameter to interpolate between two existing permeability models.

George J. Hirasaki; Kishore K. Mohanty

2005-09-05T23:59:59.000Z

142

Optical Fibers Optics and Photonics  

E-Print Network [OSTI]

Optical Fibers Optics and Photonics Dr. Palffy-Muhoray Ines Busuladzic Department of Theoretical and Applied Mathematics The University of Akron April 21, 2008 #12;Outline · History of optical fibers · What are optical fibers? · How are optical fibers made? · Light propagation through optical fibers · Application

Palffy-Muhoray, Peter

143

Well Log Techniques At Coso Geothermal Area (1985) | Open Energy  

Open Energy Info (EERE)

Coso Geothermal Area (1985) Coso Geothermal Area (1985) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Well Log Techniques Activity Date 1985 Usefulness not indicated DOE-funding Unknown Exploration Basis Impact of long term testing on the well pressure Notes The downhole pressure monitoring equipment for each well included a stainless steel pressure chamber attached to a 0.25 inch stainless steel capillary tubing. The surface end of the capillary tubing was connected to a Paroscientific quartz pressure trandsducer. References Sanyal, S.; Menzies, A.; Granados, E.; Sugine, S.; Gentner, R. (20 January 1987) Long-Term Testing of Geothermal Wells in the Coso Hot Springs KGRA Retrieved from "http://en.openei.org/w/index.php?title=Well_Log_Techniques_At_Coso_Geothermal_Area_(1985)&oldid=600462

144

Slimhole Drilling, Logging, and Completion Technology - An Update  

SciTech Connect (OSTI)

Using slim holes (diameter < 15 cm) for geothermal exploration and small-scale power production can produce significant cost savings compared to conventional rotary-drilling methods. In addition, data obtained from slim holes can be used to lower the risks and costs associated with the drilling and completion of large-diameter geothermal wells. As a prime contractor to the U.S. Department of Energy (DOE), Sandia National Laboratories has worked with industry since 1992 to develop and promote drilling, testing, and logging technology for slim holes. This paper describes the current status of work done both in-house and contracted to industry. It focuses on drilling technology, case histories of slimhole drilling projects, data collection and rig instrumentation, and high-temperature logging tools.

FINGER,JOHN T.; JACOBSON,RONALD D.

1999-10-07T23:59:59.000Z

145

Exponential coefficient plots for identifying cement channels from temperature logs  

SciTech Connect (OSTI)

One technique for identifying a cement channel in such a well is to inject cold water or diesel fuel for a period of time, followed by recording shut-in temperature profiles after the injection ceases. Qualitative judgements are made from the appearance of these profiles in order to confirm the existence of a channel. Alternatively, by processing the temperature logs mathematically, an exponential coefficient may be calculated and plotted against depth. This exponential coefficient plot is very responsive to the presence of cold fluid in a cement channel, and confirms a channel's existence quantitatively and conclusively. This paper discusses use of such a mathematical relationship in a predictive fashion for identifying injection zones. Methods are given for deriving and plotting the exponential coefficients from temperature logs of a well placed on cold fluid injection. Three examples are presented on the application of exponential coefficient plots to actual field logs for confirmation of suspected channels and for assessment of the uniformity of cement bonding.

Barnette, J.C.; Lanuke, E.W.; Carlson, N.R.

1984-01-01T23:59:59.000Z

146

Stratigraphic correlation of well logs using relational tree  

SciTech Connect (OSTI)

A heuristic waveform correlation scheme of well logs is based on a relational tree matching. Waveforms (well logs) are represented in a data structure known as a relational tree. A relational tree provides a complete description of the contextural relationships, as defined by peaks and valleys of the waveforms. The correlational scheme consists of a distance-measuring process using all possible peak attributes. First, a distance function is defined for any two nodes in terms of peak attributes. To find the best match for a given node of a given waveform, the authors measure the distance between the given node and each node from a predefined subset of the second waveform. The closest one is considered to be the matched node. The process is repeated for every node in the waveform. This quantitative correlation method has been implemented and tested with well logs from the Black Warrior basin, north Alabama. Results showed that the procedure has the capability of handling the thickening and thinning strata, as well as missing intervals.

Fang, J.H.; Tsay, F.; Lai, P.F.

1986-05-01T23:59:59.000Z

147

V-068: Citrix CloudPlatform Logs Potentially Sensitive Information in the  

Broader source: Energy.gov (indexed) [DOE]

8: Citrix CloudPlatform Logs Potentially Sensitive Information 8: Citrix CloudPlatform Logs Potentially Sensitive Information in the Log File V-068: Citrix CloudPlatform Logs Potentially Sensitive Information in the Log File January 14, 2013 - 12:15am Addthis PROBLEM: Citrix CloudPlatform Logs Potentially Sensitive Information in the Log File PLATFORM: Citrix CloudStack and CloudPlatform up to and including 3.0.5. ABSTRACT: A vulnerability was reported in Citrix CloudPlatform. REFERENCE LINKS: Document ID: CTX136163 SecurityTracker Alert ID: 1027978 CVE-2012-5616 IMPACT ASSESSMENT: Medium DISCUSSION: A vulnerability has been identified in Citrix CloudPlatform, formerly known as Citrix CloudStack, that could result in security-sensitive information being logged during the normal operation of the CloudPlatform server. IMPACT:

148

Well Log Techniques At Raft River Geothermal Area (1977) | Open Energy  

Open Energy Info (EERE)

Well Log Techniques At Raft River Geothermal Area Well Log Techniques At Raft River Geothermal Area (1977) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Well Log Techniques Activity Date 1977 Usefulness not indicated DOE-funding Unknown Exploration Basis Characterize the rock using well log data. Notes Information is given on the following logs: dual-induction focused log, including resistivity, sp, and conductivity; acoustic log; compensated neutron; compensated densilog; and caliper. Lithologic breaks for a drill core to a depth of 2840 ft are illustrated. References Covington, H.R. (1 January 1978) Deep drilling data, Raft River geothermal area, Idaho Raft River geothermal exploration well No. 4 Retrieved from "http://en.openei.org/w/index.php?title=Well_Log_Techniques_At_Raft_River_Geothermal_Area_(1977)&oldid=6004

149

Gamma Log At Alum Area (Moos & Ronne, 2010) | Open Energy Information  

Open Energy Info (EERE)

Gamma Log At Alum Area (Moos & Ronne, 2010) Gamma Log At Alum Area (Moos & Ronne, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Gamma Log At Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Gamma Log Activity Date Usefulness useful DOE-funding Unknown Notes Density, photo-electric factor (PEF), neutron, and gamma ray (GR) logs provided sufficient information to clearly delineate basement lithologic variations, suggesting that pulsed neutron logs may not in many cases be needed, References Daniel Moos, Joel Ronne (2010) Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Retrieved from "http://en.openei.org/w/index.php?title=Gamma_Log_At_Alum_Area_(Moos_%26_Ronne,_2010)&oldid=510779"

150

Boise State University Automobile Use Mileage Log (Documentation for Business Miles)  

E-Print Network [OSTI]

Boise State University Automobile Use Mileage Log (Documentation for Business Miles) Rev. 03 University Automobile Use Mileage Log (Documentation for Business Miles) Rev. 03/10 PAGE ____ (IF YOU NEED

Barrash, Warren

151

MATHEMATICS AND SCIENCE CENTERS STUDENT SERVICES ACTIVITY LOG/EVENT RECORD  

E-Print Network [OSTI]

MATHEMATICS AND SCIENCE CENTERS STUDENT SERVICES ACTIVITY LOG/EVENT RECORD Use this log for all. ENROLLEES BY TYPE: (Check one) ______ GENDER: ETHNICITY: ___ Mathematics ____ Female ___ African ___ No ___ Mathematics ___ Science ___ Technology ___ Other Describe: ____________________ 12. DESCRIPTION: (Purpose

152

Vote Selling, Voter Anonymity, and Forensic Logging of Electronic Voting Machines  

E-Print Network [OSTI]

iVotronic 8.0.1.2 Voting Machine Firmware: Final Report ForLogging of Electronic Voting Machines Sean Peisert and Mattment of electronic voting machinesforensic log- ging and

Peisert, Sean; Bishop, Matt; Yasinsac, Alec

2009-01-01T23:59:59.000Z

153

A Model for Water Factor Measurements With Fission-Neutron Logging...  

Broader source: Energy.gov (indexed) [DOE]

A Model for Water Factor Measurements With Fission-Neutron Logging Tools (May 1983) A Model for Water Factor Measurements With Fission-Neutron Logging Tools (May 1983) A Model for...

154

Nuclear Magnetic Resonance (NMR) is the only logging technique available to estimate pore-size  

E-Print Network [OSTI]

1 ABSTRACT Nuclear Magnetic Resonance (NMR) is the only logging technique available to estimate, Nuclear Magnetic Resonance (NMR) logging has been used to assess a handful of key petrophysical parameters

Torres-Verdín, Carlos

155

Neutron Log At Alum Area (Moos & Ronne, 2010) | Open Energy Information  

Open Energy Info (EERE)

Neutron Log At Alum Area (Moos & Ronne, 2010) Neutron Log At Alum Area (Moos & Ronne, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Neutron Log At Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Neutron Log Activity Date Usefulness useful DOE-funding Unknown Notes Density, photo-electric factor (PEF), neutron, and gamma ray (GR) logs provided sufficient information to clearly delineate basement lithologic variations, suggesting that pulsed neutron logs may not in many cases be needed, References Daniel Moos, Joel Ronne (2010) Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Retrieved from "http://en.openei.org/w/index.php?title=Neutron_Log_At_Alum_Area_(Moos_%26_Ronne,_2010)&oldid=511025"

156

Rapid optical method for logging dust concentration versus depth in glacial ice  

E-Print Network [OSTI]

to a cable that can lower the device down a 3-in. 7.5-cm borehole filled with butyl acetate. LED photons to the attenuation by particles.6 The AMANDA collaboration recently completed a large observatory, buried in deep a hot-water drilling tech- nique, they melted cylindrical holes down to depths of 2000 m in which were

Price, P. Buford

157

Method and apparatus for logging short radius horizontal drainholes  

SciTech Connect (OSTI)

This patent describes an apparatus for use in logging a short radius horizontal drainhole. It comprises: a tubing string having a low portion; the lower portion of the tubing string including sensor support means therein; the lower portion of the tubing string containing openings communicating with the interior thereof in the vicinity of the sensor support means to thereby exposed the interior to the pressure and temperature conditions of the horizontal drainhole; and the lower portion of the tubing string including an end portion extending transversely of the tubing sting.

Taylor, D.E.

1991-04-30T23:59:59.000Z

158

Tsallis Distribution Decorated With Log-Periodic Oscillation  

E-Print Network [OSTI]

In many situations, in all branches of physics, one encounters power-like behavior of some variables which are best described by a Tsallis distribution characterized by a nonextensivity parameter $q$ and scale parameter $T$. However, there exist experimental results which can be described only by a Tsallis distributions which are additionally decorated by some log-periodic oscillating factor. We argue that such a factor can originate from allowing for a complex nonextensivity parameter $q$. The possible information conveyed by such an approach (like the occurrence of complex heat capacity, the notion of complex probability or complex multiplicative noise) will also be discussed.

Wilk, Grzegorz

2015-01-01T23:59:59.000Z

159

Tsallis Distribution Decorated With Log-Periodic Oscillation  

E-Print Network [OSTI]

In many situations, in all branches of physics, one encounters power-like behavior of some variables which are best described by a Tsallis distribution characterized by a nonextensivity parameter $q$ and scale parameter $T$. However, there exist experimental results which can be described only by a Tsallis distributions which are additionally decorated by some log-periodic oscillating factor. We argue that such a factor can originate from allowing for a complex nonextensivity parameter $q$. The possible information conveyed by such an approach (like the occurrence of complex heat capacity, the notion of complex probability or complex multiplicative noise) will also be discussed.

Grzegorz Wilk; Zbigniew Wlodarczyk

2015-01-12T23:59:59.000Z

160

Borehole Calibration Facilities to Support Gamma Logging for Hanford Subsurface Investigation and Contaminant Monitoring - 13516  

SciTech Connect (OSTI)

Repeated gamma logging in cased holes represents a cost-effective means to monitor gamma-emitting contamination in the deep vadose zone over time. Careful calibration and standardization of gamma log results are required to track changes and to compare results over time from different detectors and logging systems. This paper provides a summary description of Hanford facilities currently available for calibration of logging equipment. Ideally, all logging organizations conducting borehole gamma measurements at the Hanford Site will take advantage of these facilities to produce standardized and comparable results. (authors)

McCain, R.G.; Henwood, P.D.; Pope, A.D.; Pearson, A.W. [S M Stoller Corporation, 2439 Robertson Drive, Richland, WA 99354 (United States)] [S M Stoller Corporation, 2439 Robertson Drive, Richland, WA 99354 (United States)

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Coal log pipeline research at the University of Missouri. Second quarterly report, April 1, 1994--June 30, 1994  

SciTech Connect (OSTI)

Coal log pipeline research continued. Progress is discussed in the following areas: fabrication, compaction, pipe abrasion, and machine design for the manufacture of the logs.

Liu, H.

1994-12-31T23:59:59.000Z

162

OPTICS5  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optics5 (5.1.02) Knowledge Base Optics5 (5.1.02) Knowledge Base Last Updated: 09/11/13 Table of Contents INSTALLATION EXECUTION bullet ** Operating Systems -- Microsoft Windows 7 and Vista ** bullet ** Running Optics5 with Microsoft Windows 7 and Vista ** bullet ** Running Optics5 with Microsoft Windows 7 and Vista 64 bit ** Optics5 may not work correctly with regional/locale settings using "," as a decimal separator. bullet Which Windows operating systems can be used to run Optics? "Class Does Not Support Automation or Expected Interface" error message bullet How much hard disk space should be available to install Optics? Optics user manual bullet I receive a virus warning (nimda-virus) when installing Optics. What should I do? NFRC Procedure for Applied Films bullet I have installed Optics but I can't find the program or the icon.

163

Appendix A Lithologic and Monitor Well Completion Logs  

Office of Legacy Management (LM)

A A Lithologic and Monitor Well Completion Logs This page intentionally left blank WELL INSTALLATION BLANK CASING: 1.25 in. Stainless Steel 0.0 to 0.35 METHOD WELL SCREEN: 1.25 in. Stainless Steel 0.35 to 3.27 DATE DEVELOPED SUMPIEND CAP: 1.25 in. Stainless Steel 3.27 to 3.58 WATER LEVEL (FT BGS) SURFACE SEAL: LOGGED BY P. McKenzie REMARKS Drillers hit water at 5 fl: well point removed. LITHOLOGIC DESCRIPTION LOCATION SHIPROCK, NM SURFACE ELEV. ( FT NGVD) 4890.00 SITE SHIPROCK TOP OF CASING (FT) 4890.00 WELL NUMBER 0602 MEAS. PT. ELEV. (FT) 4890.00 SLOT SIZE (IN) 0.125 WELL INSTALLATION INTERVAL (FT) DRILLING METHOD BLANK CASING: 1.25 in. Stainless Steel 0.0 to 0.35 METHOD WELL SCREEN: 1.25 in. Stainless Steel 0.35 to 3.27 DATE DEVELOPED SUMPIEND CAP: 1.25 in. Stainless Steel 3.27 to 3.58

164

Tests show production logging problems in horizontal gas wells  

SciTech Connect (OSTI)

A study has concluded that production logging tools employed to evaluate multiphase horizontal well production behavior should be carefully screened as to their response characteristics in fully-segregated, two-phase flow. The study, performed at Marathon Oil Co.'s petroleum technology center in Littleton, Colo., indicated that gas in highly deviated well bores segregates rapidly in the presence of water, creating a downhole environment that produces sporadic responses from full bore and diverter spinners as well as density and holdup tools. Gas Research Institute (GRI), as part of its horizontal gas well completion technology program, initiated the full-scale laboratory study to determine the severity and consequences of multiphase flow on tool response from horizontal well production. The paper discusses background of the problem, the test objectives, test facility, experimental procedures, single-phase flow, two-phase flow, and recommendations.

Branagan, P. (Branagan and Associates, Las Vegas, NV (United States)); Knight, B.L. (Marathon Oil Co., Littleton, CO (United States)); Aslakson, J. (Gas Research Inst., Chicago, IL (United States)); Middlebrook, M.L. (CER Corp., Las Vegas, NV (United States))

1994-01-10T23:59:59.000Z

165

Coal log pipeline research at the University of Missouri. 2nd quarterly report, April 4, 1995--June 30, 1995  

SciTech Connect (OSTI)

This report describes the accomplishments in coal log pipeline research and manufacturing. Flow results are included.

Liu, H.

1995-12-01T23:59:59.000Z

166

Nonimaging Optics  

Science Journals Connector (OSTI)

The nonimaging optical system, by definition, does not produce an image of the light source. Instead, it is designed to concentrate radiation at a density as high as theoretically possible. Nonimaging optics h...

Dr. Ralf Leutz; Dr. Akio Suzuki

2001-01-01T23:59:59.000Z

167

Optical Switch  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

seven wonders Optical Switch A key component in the laser chain, an optical switch called a plasma electrode Pockels cell (PEPC), was invented and developed at LLNL. A Pockels cell...

168

Forward Modeling of the Induction Log Response of a Fractured Geologic Formation  

E-Print Network [OSTI]

3.1 Layered Earth Model The environment used for the induction log simulations is a layered Earth model. The model consists of six layers that are assigned different thicknesses and conductivities based on the desired induction log... Tx-Rx pair has a fixed separation and is moved along a vertical profile through the subsurface taking measurements at predetermined logging points. 20 The second change to the original Seatem code involves the surrounding environment. The code...

Bray, Steven Hunter

2013-05-02T23:59:59.000Z

169

Pressure Temperature Log At Silver Peak Area (DOE GTP) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Pressure Temperature Log At Silver Peak Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Silver Peak Area (DOE GTP) Exploration Activity Details Location Silver Peak Area Exploration Technique Pressure Temperature Log Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Pressure_Temperature_Log_At_Silver_Peak_Area_(DOE_GTP)&oldid=511053" Categories: Exploration Activities

170

Synthesis of Multipole Acoustic Logging Measurements Using the Generalized Reflection/Transmission Matrices Method  

E-Print Network [OSTI]

Synthesis of Multipole Acoustic Logging Measurements Using the Generalized Reflection analytical method that has been used in multipole waveform synthesis for radially multilayered formations

Torres-Verdín, Carlos

171

Density Log at Fish Lake Valley Area (DOE GTP) | Open Energy...  

Open Energy Info (EERE)

Fish Lake Valley Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Density Log at Fish Lake Valley Area (DOE GTP) Exploration...

172

E-Print Network 3.0 - advanced logging workshop Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ability to corrupt the log 12;les. We describe a ... Source: Schneier, Bruce - BT Group plc Collection: Computer Technologies and Information Sciences 22 Summary Workshop Report...

173

Neutron Log At Silver Peak Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

Neutron Log Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Additional References Retrieved from "http:en.openei.org...

174

Temperatures and Natural Gamma-Ray Logs Obtained in 1986 from...  

Open Energy Info (EERE)

Changes in temperature logs run in July and September appear to result from fluid loss to the formation during and following drilling and possibly to ground shaking...

175

Density Log at Fort Bliss Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

Fort Bliss Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Density Log at Fort Bliss Area (DOE GTP) Exploration Activity Details...

176

Social Network Discovery from Multiple Log Data through a Behavior Model  

Science Journals Connector (OSTI)

This paper proposes a new framework for inferring social networks of smart phone users from log data on web browsing and mobile application execution. In the framework, a behavior model is built by taking into account the effects of homophily, other ... Keywords: social network, log analysis, behavior model

Tomonobu Ozaki; Minoru Etoh

2012-03-01T23:59:59.000Z

177

Department of Industrial & Manufacturing Engineering Spring 2011 Log Splitter Tank Quality Improvement  

E-Print Network [OSTI]

PENNSTATE Department of Industrial & Manufacturing Engineering Spring 2011 Log Splitter Tank around a central hydraulic tank which acts as the base of the log splitter. The tanks can leak due to poor weld integrity, further aggravated by stresses on the tank during towing. Also, internal rust

Demirel, Melik C.

178

Synthesis of class-AB log-domain filters based on nonlinear transconductance  

Science Journals Connector (OSTI)

In this paper a new generalized method for synthesis of class-AB current-mode log-domain filters, using nonlinear transconductance cell, is presented. The proposed nonlinear transconductance cell is designed by employing floating-gate MOS (FG-MOS) transistors ... Keywords: Class-AB, Current splitter, Current-mode, Filter, Log-domain, Transconductance

E. Farshidi

2010-05-01T23:59:59.000Z

179

Integration of Geology, Rock-Physics, Logs, and Pre-stack Seismic for Reservoir Porosity Estimation  

E-Print Network [OSTI]

The main objective of this paper is to obtain reservoir properties, such as porosity, both at the well locations and in the inter-well regions from seismic data and well logs. The seismic and well-log datasets are from an ...

Al Muhaidib, Abdulaziz

2011-01-01T23:59:59.000Z

180

SIMULATION OF RESISTIVITY LOGGING-WHILE-DRILLING (LWD) MEASUREMENTS USING A SELF-ADAPTIVE  

E-Print Network [OSTI]

the electromagnetic response of geophysical resistivity logging instruments in a borehole environment in a borehole environment. The measurements are used to assess electrical properties of rock formations. Logging (see, for example, [7, 18] and references therein) to accurately solve a large class of engineering

Torres-Verdín, Carlos

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

The broad-band fractal nature of heterogeneity in the upper crust from petrophysical logs  

Science Journals Connector (OSTI)

......1991. Deep borehole log evidence for...heterogeneity and large-scale velocity...Continental Deep-Drilling (KTB) Holes...results, for the borehole data, show broad-band...spectral scaling in borehole logs, Geophys...23, 31193122. large-scale velocity......

Sean S. Dolan; Christopher J. Bean; Bruno Riollet

1998-03-01T23:59:59.000Z

182

Impact of assumption of log-normal distribution on monthly rainfall estimation from TMI  

E-Print Network [OSTI]

The log-normal assumption for the distribution of the rain rates used for the estimation of monthly rain totals proposed in Wilheit et al 1991 was examined. Since the log-normal assumption was originally used for the SSM/I, it is now necessary to re...

Lee, Dong Heon

2012-06-07T23:59:59.000Z

183

Weekly Security Incident Log Period of Nov 27 -Dec 2, 2012  

E-Print Network [OSTI]

was obtained. 11/28/2012 01:41 PM Suspicious Person 2012-002119 ROSS BUILDING - NORTH TOWER Private PropertyWeekly Security Incident Log Period of Nov 27 - Dec 2, 2012 Incident No. Reported Date Building:41 AM Theft, Under Weekly Security Incident Log Printed: 12/3/2012 3:18:11 PM 1 Period of Nov 27 - Dec 2

184

Vote Selling, Voter Anonymity, and Forensic Logging of Electronic Voting Machines  

E-Print Network [OSTI]

Vote Selling, Voter Anonymity, and Forensic Logging of Electronic Voting Machines Sean Peisert,bishop}@cs.ucdavis.edu Alec Yasinsac School of Computer and Information Sciences University of South Alabama yasinsac of electronic voting machines---forensic log­ ging and auditing---that, in concert with other el­ ements

Bishop, Matt

185

Vote Selling, Voter Anonymity, and Forensic Logging of Electronic Voting Machines  

E-Print Network [OSTI]

Vote Selling, Voter Anonymity, and Forensic Logging of Electronic Voting Machines Sean Peisert,bishop}@cs.ucdavis.edu Alec Yasinsac School of Computer and Information Sciences University of South Alabama yasinsac voting machines--forensic log- ging and auditing--that, in concert with other el- ements of the VVSG2007

Peisert, Sean

186

Cognition Based Collaboration Log for CSCW Datong Chen & Hans-Werner Gellersen  

E-Print Network [OSTI]

Cognition Based Collaboration Log for CSCW Datong Chen & Hans-Werner Gellersen Tec collaborative work. Analysis and recognition techniques are applied to the collected information and to obtain and stored in a special designed content-based multimedia database called collaboration log

Chen, Datong

187

Computing Reliability Distributions of Windowed Max-log-map (MLM) Detectors : ISI Channels  

E-Print Network [OSTI]

Computing Reliability Distributions of Windowed Max-log-map (MLM) Detectors : ISI Channels Fabian provide exact expressions for both i) the joint distribution of the MLM symbol reliabilities, and ii--detection, intersymbol inteference, max-log- map, probability distribution, reliability I. INTRODUCTION The max

Kavcic, Aleksandar

188

Density Log at Alum Area (Moos & Ronne, 2010) | Open Energy Information  

Open Energy Info (EERE)

Moos & Ronne, 2010) Moos & Ronne, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Density Log at Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Density Log Activity Date Usefulness useful DOE-funding Unknown Notes Density, photo-electric factor (PEF), neutron, and gamma ray (GR) logs provided sufficient information to clearly delineate basement lithologic variations, suggesting that pulsed neutron logs may not in many cases be needed, and density and electrical resistivity data were important to calibrate structural models based on surface surveys. References Daniel Moos, Joel Ronne (2010) Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well,

189

Pressure Temperature Log At Vale Hot Springs Area (Combs, Et Al., 1999) |  

Open Energy Info (EERE)

Vale Hot Springs Area (Combs, Et Al., 1999) Vale Hot Springs Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Vale Hot Springs Area (Combs, Et Al., 1999) Exploration Activity Details Location Vale Hot Springs Area Exploration Technique Pressure Temperature Log Activity Date Usefulness not indicated DOE-funding Unknown Notes Numerous temperature logs were taken with Sandia's platinum-resistance-thermometer (PRT) tool which along with a Sandia logging truck remained on-site for the entire project. Static temperature logs (no flow in hole) were done with this tool when coring operations were suspended for bit trips, rig maintenance, or other time intervals that would permit the hole to warm up near its static temperature K580gradient.

190

Resistivity Log At Long Valley Caldera Area (Sorey, Et Al., 1991) | Open  

Open Energy Info (EERE)

Resistivity Log At Long Valley Caldera Area (Sorey, Resistivity Log At Long Valley Caldera Area (Sorey, Et Al., 1991) Exploration Activity Details Location Long Valley Caldera Area Exploration Technique Resistivity Log Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Lithologic and resistivity logs from wells drilled into areas of less than 20 ohm-m resistivity show clay mineralization resulting from hydrothermal alteration within the volcanic fill (Nordquist, 1987). Low resistivity in the vicinity of well 44-16, identified in wellbore geophysical logs and two dimensional MT modeling is restricted to the thermal-fluid reservoirs in the early rhyolite and Bishop Tuff (Nordquist, 1987; Suemnicht, 1987). The MT data suggest that the resistivity structure near Mammoth Mountain is

191

Geophysical logging case history of the Raft River geothermal system, Idaho  

Open Energy Info (EERE)

Geophysical logging case history of the Raft River geothermal system, Idaho Geophysical logging case history of the Raft River geothermal system, Idaho Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Report: Geophysical logging case history of the Raft River geothermal system, Idaho Details Activities (1) Areas (1) Regions (0) Abstract: Drilling to evaluate the geothermal resource in the Raft River Valley began in 1974 and resulted in the discovery of a geothermal reservoir at a depth of approximately 1523 m (500 ft). Several organizations and companies have been involved in the geophysical logging program. There is no comprehensive report on the geophysical logging, nor has there been a complete interpretation. The objectives of this study are to make an integrated interpretation of the available data and compile a case history. Emphasis has been on developing a simple interpretation

192

Pressure Temperature Log At Mccoy Geothermal Area (DOE GTP) | Open Energy  

Open Energy Info (EERE)

Pressure Temperature Log At Mccoy Geothermal Area (DOE GTP) Pressure Temperature Log At Mccoy Geothermal Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Mccoy Geothermal Area (DOE GTP) Exploration Activity Details Location Mccoy Geothermal Area Exploration Technique Pressure Temperature Log Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Pressure_Temperature_Log_At_Mccoy_Geothermal_Area_(DOE_GTP)&oldid=511052" Categories: Exploration Activities DOE Funded Activities ARRA Funded Activities What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

193

U-039: ISC Update: BIND 9 Resolver crashes after logging an error in  

Broader source: Energy.gov (indexed) [DOE]

9: ISC Update: BIND 9 Resolver crashes after logging an error 9: ISC Update: BIND 9 Resolver crashes after logging an error in query.c U-039: ISC Update: BIND 9 Resolver crashes after logging an error in query.c November 16, 2011 - 2:30pm Addthis PROBLEM: ISC Update: BIND 9 Resolver crashes after logging an error in query.c. PLATFORM: Versions of BIND, 9.4-ESV, 9.6-ESV, 9.7.x, 9.8.x ABSTRACT: A remote server can cause the target connected client to crash. Organizations across the Internet are reporting crashes interrupting service on BIND 9 nameservers performing recursive queries. Affected servers crash after logging an error in query.c with the following message: "INSIST(! dns_rdataset_isassociated(sigrdataset))" Multiple versions are reported as being affected, including all currently supported release versions of ISC BIND 9. ISC is actively investigating the root cause and

194

Acoustic Logs At Alum Area (Moos & Ronne, 2010) | Open Energy Information  

Open Energy Info (EERE)

Acoustic Logs At Alum Geothermal Area (Moos & Ronne, Acoustic Logs At Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Acoustic Logs Activity Date Usefulness useful DOE-funding Unknown Notes The results revealed that acoustic images are superior to electrical images to detect structurally important natural fractures and stress-induced wellbore breakouts and tensile wall fractures, and were adequate to detect stratigraphic features. References Daniel Moos, Joel Ronne (2010) Selecting The Optimal Logging Suite For Geothermal Reservoir Evaluation- Results From The Alum 25-29 Well, Nevada Retrieved from "http://en.openei.org/w/index.php?title=Acoustic_Logs_At_Alum_Area_(Moos_%26_Ronne,_2010)&oldid=510215" Categories: Exploration Activities

195

Well log interpretation of certain geothermal fields in the Imperial Valley, California  

SciTech Connect (OSTI)

This study reviews the wireline log responses of some geothermal fields in the Imperial Valley, California. The fields under study include the Heber, the East Mesa, the Brawley, and the Westmoreland. The well logs used in the study did not include all the wireline surveys obtained by the operators. The selected well logs obtained under special arrangements with the operators were chosen to maintain the anonymity of specific well locations but are only representative of each area. Analysis of the well logs indicates that on an individual field basis, the well logs are excellent for correlation purposes. The presence of extremely saline fluids in some fields precludes the monitoring of Q/sub v/ (cation exchange capacity per unit volume) profile for detection of hydrothermally altered zones. The producing sections in all the fields are characterized by low porosity and high resistivity.

Ershaghi, I.; Abdassah, D.

1984-03-01T23:59:59.000Z

196

Cross-Dipole Acoustic Log At Alum Area (Moos & Ronne, 2010) | Open Energy  

Open Energy Info (EERE)

Dipole Acoustic Log At Alum Area (Moos & Ronne, 2010) Dipole Acoustic Log At Alum Area (Moos & Ronne, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Cross-Dipole Acoustic Log At Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Cross-Dipole Acoustic Log Activity Date Usefulness useful DOE-funding Unknown Notes A crossed-dipole acoustic log detected stress induced anisotropy in the sediments, and also appeared to be able to identify and orient steeply dipping, compliant and therefore possibly conductive fractures in basement rocks. Because the shear-wave velocity was extremely low throughout most of the sedimentary section dipole data was required for its determination. The analysis results, which included a stress determination based on an

197

Well Log Techniques At Snake River Plain Region (DOE GTP) | Open Energy  

Open Energy Info (EERE)

Well Log Techniques At Snake River Plain Region (DOE GTP) Well Log Techniques At Snake River Plain Region (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Well Log Techniques At Snake River Plain Region (DOE GTP) Exploration Activity Details Location Snake River Plain Geothermal Region Exploration Technique Well Log Techniques Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Well_Log_Techniques_At_Snake_River_Plain_Region_(DOE_GTP)&oldid=600470" Categories: Exploration Activities DOE Funded Activities ARRA Funded Activities What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

198

U-038: BIND 9 Resolver crashes after logging an error in query.c |  

Broader source: Energy.gov (indexed) [DOE]

8: BIND 9 Resolver crashes after logging an error in query.c 8: BIND 9 Resolver crashes after logging an error in query.c U-038: BIND 9 Resolver crashes after logging an error in query.c November 16, 2011 - 8:37am Addthis PROBLEM: BIND 9 Resolver crashes after logging an error in query.c. PLATFORM: Multiple version of BIND 9. Specific versions under investigation ABSTRACT: A remote server can cause the target connected client to crash. Organizations across the Internet are reporting crashes interrupting service on BIND 9 nameservers performing recursive queries. Affected servers crash after logging an error in query.c with the following message: "INSIST(! dns_rdataset_isassociated(sigrdataset))" Multiple versions are reported as being affected, including all currently supported release versions of ISC BIND 9. ISC is actively investigating the root cause and

199

OPTICS 5  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

OPTICS (Version 5.1.02) OPTICS (Version 5.1.02) Release notes NOTE: See the Optics Knowledge Base for how to run this version of Optics on the Microsoft Vista and Microsoft Windows 7 operating systems March 5, 2003: Release Maintenance Pack 2 New ! January 7, 2003: Release Maintenance Pack 1 October 23, 2002: Release Optics 5.1.01 September 27, 2002: Release Optics 5.1.00 (only released on CDs at NFRC Annual Fall Meeting) Release notes Maintenance Pack 2 Bug fixes: New features: bullet Applied films that were created could not be saved or exported. This has been fixed. bullet Exporting glazing systems generated a message that the operation failed because the glazing system type is unknown. Glazing systems can now be exported to file (e.g. to view the spectral data), but the structure information will be lost.

200

Optical Magnetism  

Science Journals Connector (OSTI)

Magnetic dipole radiation one fourth as intense as electric dipole radiation, as well as a novel nonlinear magneto-optical effect are reported in dielectric media.

Oliveira, Samuel L; Rand, Stephen C

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Optical Expanders with Applications in Optical Computing  

E-Print Network [OSTI]

Optical Expanders with Applications in Optical Computing John H. Reif Akitoshi Yoshida July 20, 1999 Abstract We describe and investigate an optical system which we call an optical expander. An optical expander elec- trooptically expands an optical boolean pattern encoded in d bits into an optical

Reif, John H.

202

Optical Glass  

Science Journals Connector (OSTI)

... space of time. In the forefront of such vital industries is the manufacture of optical glass. However great the other resources in men and material may be, it would be ... be, it would be quite impossible to wage successful warfare without adequate supplies of optical glass ior binocular field- ...

1919-03-27T23:59:59.000Z

203

Coal log pipeline research at the University of Missouri. 1st Quarterly report for 1995, January 1, 1995--March 31, 1995  

SciTech Connect (OSTI)

Work continued on the study of coal log pipeline research. Individual projects described include fast compaction of coal logs; effect of cooling on coal log quality; coal log capping; effectiveness of adding fiber to enhance coal log quality; fabrication using hydrophobic binders; cost estimation of different lubricants; automatic control of coal log pipeline system; CLP design; coal log train transport; economics of coal log pipeline; legal aspects; heating, cooling, and drying of logs; vacuum systems to enhance production; design; and effect of piston modification on capping.

Liu, H.

1995-08-01T23:59:59.000Z

204

Fiber optic coupled optical sensor  

DOE Patents [OSTI]

A displacement sensor includes a first optical fiber for radiating light to a target, and a second optical fiber for receiving light from the target. The end of the first fiber is adjacent and not axially aligned with the second fiber end. A lens focuses light from the first fiber onto the target and light from the target onto the second fiber.

Fleming, Kevin J. (Albuquerque, NM)

2001-01-01T23:59:59.000Z

205

Grade Assignments for Models Used for Calibration of Gross-Count Gamma-Ray Logging Systems (December 1983)  

Broader source: Energy.gov [DOE]

Grade Assignments for Models Used for Calibration of Gross-Count Gamma-Ray Logging Systems (December 1983)

206

Nonlinear optics  

E-Print Network [OSTI]

Nicolaas Bloembergen, recipient of the Nobel Prize for Physics (1981), wrote Nonlinear Optics in 1964, when the field of nonlinear optics was only three years old. The available literature has since grown by at least three orders of magnitude.The vitality of Nonlinear Optics is evident from the still-growing number of scientists and engineers engaged in the study of new nonlinear phenomena and in the development of new nonlinear devices in the field of opto-electronics. This monograph should be helpful in providing a historical introduction and a general background of basic ideas both for expe

Bloembergen, Nicolaas

1996-01-01T23:59:59.000Z

207

Optical Expanders with Applications in Optical Computing  

E-Print Network [OSTI]

Optical Expanders with Applications in Optical Computing John H. Reif \\Lambda Akitoshi Yoshida \\Lambda July 20, 1999 Abstract We describe and investigate an optical system which we call an optical expander. An optical expander elec­ trooptically expands an optical boolean pattern encoded in d bits

Reif, John H.

208

Acoustic Logs At Newberry Caldera Area (Combs, Et Al., 1999) | Open Energy  

Open Energy Info (EERE)

Acoustic Logs At Newberry Caldera Area (Combs, Et Al., 1999) Acoustic Logs At Newberry Caldera Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Acoustic Logs At Newberry Caldera Area (Combs, Et Al., 1999) Exploration Activity Details Location Newberry Caldera Area Exploration Technique Acoustic Logs Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes The acoustic borehole televiewer (BHTV) was run twice in the wellbore with limited success. There were several problems with the tool's fimctions, but images were successfully obtained over the interval from 2748' to 3635'. References Jim Combs, John T. Finger, Colin Goranson, Charles E. Hockox Jr., Ronald D. Jacobsen, Gene Polik (1999) Slimhole Handbook- Procedures And Recommendations For Slimhole Drilling And Testing In Geothermal Exploration

209

Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Hours  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Hours in VolunteerMatch Community Connections: Our link to Northern New Mexico Communities Latest Issue:Dec. 2013 - Jan. 2014 All Issues » submit Nonprofit Organizations: Have Your Los Alamos Employees/Retirees Log Hours in VolunteerMatch Lab employees and retirees should log their VolunteerMatch hours to benefit local nonprofits. March 1, 2013 Volunteers help fill sandbags during flood season Volunteers help in many different roles including in healthcare. Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email So far, employees and retirees have volunteered more than 1.2 million volunteer hours. If you are a nonprofit organization that has Lab employees or retirees as

210

Neutron Log At Fort Bliss Area (Combs, Et Al., 1999) | Open Energy  

Open Energy Info (EERE)

Area (Combs, Et Al., 1999) Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Neutron Log At Fort Bliss Area (Combs, Et Al., 1999) Exploration Activity Details Location Fort Bliss Area Exploration Technique Neutron Log Activity Date Usefulness not indicated DOE-funding Unknown Notes Three principal types of data were obtained from this drilling project: core samples of the lithology penetrated by the holes, records of drilling behavior (such as water level in the hole, changes in rate of penetration etc.), and multiple temperature logs (both during and after drilling) in each well. A suite of geophysical logs (gamma ray, neutron, sonic, and resistivity) was also run after completion of drilling. References Jim Combs, John T. Finger, Colin Goranson, Charles E. Hockox Jr.,

211

"Tier","PRIORITY","Total Tickets Logged","Tickets Closed","Currently...  

Broader source: Energy.gov (indexed) [DOE]

"TOTAL",,255,261,0 "SCR",,255,255,0 ,,0.9843137255,0.9616858238 "Total Issues Report - ESS",,,,"20120101 - 20120418" "Tier","PRIORITY","Total Tickets Logged","Tickets...

212

UMD WebAssign -General Information Logging into the WebAssign system  

E-Print Network [OSTI]

UMD WebAssign - General Information · Logging into the WebAssign system o If you registered for the course later than the day before classes started you will not yet be enrolled in the course on Web

Johnson, Raymond L.

213

Characterization of the Germania Spraberry unit from analog studies and cased-hole neutron log data  

E-Print Network [OSTI]

a dependent variable (permeability) from multiple independent variables (rock type, shale volume and porosity) will also be investigated in this study. A log data base includes digitized formats of gamma ray, cased hole neutron, limited resistivity...

Olumide, Babajide Adelekan

2005-11-01T23:59:59.000Z

214

Interpretation of some wireline logs in geothermal fields of the Imperial Valley, California  

SciTech Connect (OSTI)

This study reviews the wireline log responses of some geothermal fields in the Imperial Valley, California. The fields under study include the Heber, the East Mesa, the Brawley and the Westmoreland. The selected well logs obtained under special arrangements with the operators were chosen to maintain the anonymity of specific well locations but are only representative of each area. Analysis of the well logs indicate that on an individual field basis, the well logs are excellent for correlation purposes. The presence of extremely saline fluids in some fields precludes the monitoring of Q /SUB V/ profile for detection of hydrothermally altered zones. The producing sections in all the fields are characterized by low porosity and high resistivity.

Ershaghi, I.; Abdassah, D.

1983-03-01T23:59:59.000Z

215

In cooperation with the University of Waterloo, Canada Application of Advanced Geophysical Logging Methods  

E-Print Network [OSTI]

.S. Geological Survey #12;2 Figure 1. Location of Rocketdyne Santa Susana Field Laboratory and logged boreholes sandstone and mudstone at the Rocketdyne Santa Susana Field ,, in southern Ventura County, California (fig

Singha, Kamini

216

Approximate Effects of Off-Center Acoustic Sondes and Elliptic Boreholes Upon Full Waveform Logs  

E-Print Network [OSTI]

Full waveform acoustic well logging has become instrumental to hydrocarbon exploration because of its ability to determine in situ velocity information for P and S waves as well as the attenuation (or absorption) of seismic ...

Willis, M. E.

1983-01-01T23:59:59.000Z

217

Characteristic fuel consumption and exhaust emissions in fully mechanized logging operations  

Science Journals Connector (OSTI)

A study was done using eight different logging machines (harvesters and forwarders) in clear-felling operations to quantify the associated fuel consumption, and to define the inherent relationship between engine ...

Radomir Klvac; Alois Skoupy

2009-12-01T23:59:59.000Z

218

Lithology and well log study of Campbell E-2 geothermal test...  

Open Energy Info (EERE)

well log study of Campbell E-2 geothermal test well, Humboldt House geothermal prospect, Pershing County, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library...

219

Formation evaluation using wavelet analysis on logs of the Chinji and Nagri Formations, northern Pakistan  

E-Print Network [OSTI]

The relatively new method of using wavelets in well log analysis is a powerful tool for defining multiple superimposed scales of lithic trends and contacts. Interpreting depositional processes associated with different scales of vertical variation...

Tanyel, Emre Doruk

2006-10-30T23:59:59.000Z

220

Correction of non-equilibrated temperature logs and implications for geothermal investigations  

Science Journals Connector (OSTI)

Optimum data for any geothermal investigation are densely sampled, high precision temperature logs from boreholes. They should represent the formation temperature as accurately as possible. Often, temperature measurements influenced by the drilling process and the circulation do not have the quality which is required for geothermal methods. Horner's method is a widely used correction method that is based on analysis of a time series of temperature observations. Mostly, these data are not available and a correction is therefore not possible. The approach presented here enables us to correct entire temperature logs even if no repeat measurements were carried out. This is achieved by combination of the theory of Horner's method with estimates for radial heat flow. Given a large number of technically perturbed logs this new approach enlarges considerably the potential database suitable for geothermal methods. The implications for two important fields of application are also discussed. These are fluid flow analysis and analysis of the ground surface temperature history on temperature logs.

Andrei Zschocke

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Using Domain Models for Context-Rich User Logging Stephen Dignum  

E-Print Network [OSTI]

Traversal, User Logging 1. INTRODUCTION Searches within document collections like intranets differ from amount of time is spent by users trying to learn the domain characteristics even before they are able

Kruschwitz, Udo

222

Station location map and audio-magnetotelluric data log for Rye...  

Open Energy Info (EERE)

location map and audio-magnetotelluric data log for Rye Patch known geothermal resource area Jump to: navigation, search OpenEI Reference LibraryAdd to library Map: Station...

223

E-print Network Web Log News: Research Communications for Scientists...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Website Policies and Important Links E-print Web Log E-print Network News E-print Network About Search Browse by Discipline Find Scientific Societies Receive E-print Alerts Contact...

224

COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO GEOTHERMAL  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO GEOTHERMAL FIELD, CA Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Proceedings: COMPARISON OF ACOUSTIC AND ELECTRICAL IMAGE LOGS FROM THE COSO GEOTHERMAL FIELD, CA Details Activities (1) Areas (1) Regions (0) Abstract: Electrical and acoustic image logs collected from well 58A-10 in crystalline rock on the eastern margin of the Coso Geothermal Field, CA, reveal different populations of planar structures intersecting the borehole. Electrical image logs appear to be sensitive to variations in

225

ITTF-016 Website Development-Maintenance Log 09_0909 EOTA - Business Form  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6 Website Development-Maintenance Log 09_0909 6 Website Development-Maintenance Log 09_0909 EOTA - Business Form Document Title: ITTP-015 Web Site Development / Maintenance Document Number: Website Development and Maintenance log ITT Melissa Otero N/A Referenced Documents: Parent Document: ITTF-016 Rev. 11_0419 Approvers: Melissa Otero Document Owner: Ben Aragon Backup Owner: Notify of Changes: A B 08_0818 Revision History: Rev. Description of Change Intitial Release. Added headings to address to include: Performance Requirements, Statutory and Regulatory Requirements, Information from Previous Similar Designs, and Other Requirements. Added additional column to indicate "Estimated Completion Date" of WSD projects. "Design Verification Complete" and "Design Validation Complete" columns removed from log.

226

Gamma Log At Raft River Geothermal Area (1979) | Open Energy Information  

Open Energy Info (EERE)

Gamma Log At Raft River Geothermal Area (1979) Gamma Log At Raft River Geothermal Area (1979) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Gamma Log At Raft River Geothermal Area (1979) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Gamma Log Activity Date 1979 Usefulness useful DOE-funding Unknown Exploration Basis To allow for the lateral and vertical extrapolation of core and test data and bridged the gap between surface geophysical data and core analyses. Notes Borehole gamma spectrometry can be used to identify anomalous concentration of uranium, thorium, and potassium which are probably due to transportation by hydrothermal solutions. Computer crossplotting was used as an aid to the identification of such rock types as quartzite, quartz monzonite, and

227

Gamma Log At Fort Bliss Area (Combs, Et Al., 1999) | Open Energy  

Open Energy Info (EERE)

Fort Bliss Area (Combs, Et Al., 1999) Fort Bliss Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Gamma Log At Fort Bliss Area (Combs, Et Al., 1999) Exploration Activity Details Location Fort Bliss Area Exploration Technique Gamma Log Activity Date Usefulness not indicated DOE-funding Unknown Notes Three principal types of data were obtained from this drilling project: core samples of the lithology penetrated by the holes, records of drilling behavior (such as water level in the hole, changes in rate of penetration etc.), and multiple temperature logs (both during and after drilling) in each well. A suite of geophysical logs (gamma ray, neutron, sonic, and resistivity) was also run after completion of drilling. References Jim Combs, John T. Finger, Colin Goranson, Charles E. Hockox Jr.,

228

Emission formation during wood log combustion in fireplaces ?? part I: volatile combustion stage  

Science Journals Connector (OSTI)

A CFD-based tool for the analysis of combustion and emissions in batch-fired wood log combustion is introduced. It consists of submodels for drying and pyrolysis of a wood log, for combustion of volatilised fuel and char, for radiative heat transfer, and for NO formation implemented in a commercial CFD-programme (Fluent) for turbulent flows. Comparing model predictions to experimental data in a test oven shows the applicability of the different submodels and combination of them.

M. Huttunen; J. Saastamoinen; P. Kilpinen; L. Kjaldman; H. Oravainen; S. Bostrom

2006-01-01T23:59:59.000Z

229

Results of investigations at the Zunil geothermal field, Guatemala: Well logging and brine geochemistry  

SciTech Connect (OSTI)

The well logging team from Los Alamos and its counterpart from Central America were tasked to investigate the condition of four producing geothermal wells in the Zunil Geothermal Field. The information obtained would be used to help evaluate the Zunil geothermal reservoir in terms of possible additional drilling and future power plant design. The field activities focused on downhole measurements in four production wells (ZCQ-3, ZCQ-4, ZCQ-5, and ZCQ-6). The teams took measurements of the wells in both static (shut-in) and flowing conditions, using the high-temperature well logging tools developed at Los Alamos National Laboratory. Two well logging missions were conducted in the Zunil field. In October 1988 measurements were made in well ZCQ-3, ZCQ-5, and ZCQ-6. In December 1989 the second field operation logged ZCQ-4 and repeated logs in ZCQ-3. Both field operations included not only well logging but the collecting of numerous fluid samples from both thermal and nonthermal waters. 18 refs., 22 figs., 7 tabs.

Adams, A.; Dennis, B.; Van Eeckhout, E.; Goff, F.; Lawton, R.; Trujillo, P.E.; Counce, D.; Archuleta, J. (Los Alamos National Lab., NM (USA)); Medina, V. (Instituto Nacional de Electrificacion, Guatemala City (Guatemala). Unidad de Desarollo Geotermico)

1991-07-01T23:59:59.000Z

230

Characteristics of the nuclear magnetic resonance logging response in fracture oil and gas reservoirs  

Science Journals Connector (OSTI)

Fracture oil and gas reservoirs exist in large numbers. The accurate logging evaluation of fracture reservoirs has puzzled petroleum geologists for a long time. Nuclear magnetic resonance (NMR) logging is an effective new technology for borehole measurement and formation evaluation. It has been widely applied in non-fracture reservoirs, and good results have been obtained. But its application in fracture reservoirs has rarely been reported in the literature. This paper studies systematically the impact of fracture parameters (width, number, angle, etc), the instrument parameter (antenna length) and the borehole condition (type of drilling fluid) on NMR logging by establishing the equation of the NMR logging response in fracture reservoirs. First, the relationship between the transverse relaxation time of fluid-saturated fracture and fracture aperture inthe condition of different transverse surface relaxation rates was analyzed; then, the impact of the fracture aperture, dip angle, length of two kinds of antennas and mud type was calculated through forward modeling and inversion. The results show that the existence of fractures affects the NMR logging; the characteristics of the NMR logging response become more obvious with increasing fracture aperture and number of fractures. It is also found that T2 distribution from the fracture reservoir will be affected by echo spacing, type of drilling fluids and length of antennas. A long echo spacing is more sensitive to the type of drilling fluid. A short antenna is more effective for identifying fractures. In addition, the impact of fracture dip angle on NMR logging is affected by the antenna length.

Lizhi Xiao; Kui Li

2011-01-01T23:59:59.000Z

231

Optical memory  

DOE Patents [OSTI]

Optical memory comprising: a semiconductor wire, a first electrode, a second electrode, a light source, a means for producing a first voltage at the first electrode, a means for producing a second voltage at the second electrode, and a means for determining the presence of an electrical voltage across the first electrode and the second electrode exceeding a predefined voltage. The first voltage, preferably less than 0 volts, different from said second voltage. The semiconductor wire is optically transparent and has a bandgap less than the energy produced by the light source. The light source is optically connected to the semiconductor wire. The first electrode and the second electrode are electrically insulated from each other and said semiconductor wire.

Mao, Samuel S; Zhang, Yanfeng

2013-07-02T23:59:59.000Z

232

Coal log pipeline research at University of Missouri. 3rd quarterly report for 1995, July 1, 1995--September 30, 1995  

SciTech Connect (OSTI)

During this quarter (1/1/95-9/30/95), major progress has been made in the following areas of coal log pipeline research, development and technology transfer: (1) Conceptual design of a test machine based on hydraulic presses to mass-produce 5.4-inch-diameter coal logs for testing in a 6-inch-diameter pipeline has been completed. (2) Conceptual design of a rotary-press machine to produce 1.9-inch-diameter coal logs for testing in a 2-inch-diameter pipeline has also been completed. (3) It has been confirmed through experiments that molds with round-edge exit can make logs as good as those made with tapered exit. (4) Conducted a study to determine the effect of surface condition of mold and lubricants on the quality of coal logs. (5) Completed an evaluation of the effect of fiber (wood pulp) on coal log quality. (6) Prepared an apparatus for testing fast compaction of coal logs -- 2 second per log. (7) Compacted coal logs in a 5.3-inch-diameter mold. (8) Completed a preliminary study to assess vacuum and steam heating systems to enhance coal log production and quality. (9) Changed the small-scale-CLP-demo loop from a once-through system to a recirculating system. (10) Completed revision of CLP economic model and revised the 1993 report.

Liu, H.

1995-12-31T23:59:59.000Z

233

Resistivity Log At Alum Area (Moos & Ronne, 2010) | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit History Facebook icon Twitter icon » Resistivity Log At Alum Area (Moos & Ronne, 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Alum Geothermal Area (Moos & Ronne, 2010) Exploration Activity Details Location Alum Geothermal Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness useful DOE-funding Unknown Notes Density and electrical resistivity data were important to calibrate structural models based on surface surveys. Fluid flow appeared to be concentrated beneath the detachment within an interval in which some mud losses occurred while drilling, and shallow-reading resistivity logs recorded much lower values than deeper-reading logs suggesting that

234

Long-term Carbon Loss and Recovery Following Selective Logging in Amazon Forests  

SciTech Connect (OSTI)

Amazon deforestation contributes significantly to global carbon (C) emissions. In comparison, the contribution from selective logging to atmospheric CO2 emissions, and its impact on regional C dynamics, is highly uncertain. Using a new geographically-based modeling approach in combination with high resolution remote sensing data from 1999-2002, we estimate that C emissions were 0.04 0.05 Pg C yr-1 due to selective logging from a ~2,664,960 km2 region of the Brazilian Amazon. Selective logging was responsible for 15-19% higher carbon emissions than reported from deforestation (clear-cutting) alone. Our simulations indicated that forest carbon lost via selective logging lasts two to three decades following harvest, and that the original live biomass takes up to a century to recover, if the forests are not subsequently cleared. The two- to three-decade loss of carbon results from the biomass damaged by logging activities, including leaves, wood, and roots, estimated to be 89.1 Tg C yr-1 from 1999-2002 over the study region, leaving 70.0 Tg C yr-1 and 7.9 Tg C yr-1 to accumulate as coarse woody debris and soil C, respectively. While avoided deforestation is central to crediting rainforest nations for reduced carbon emissions, the extent and intensity of selective logging are also critical to determining carbon emissions in the context of Reduced Emissions from Deforestation and Forest Degradation (REDD). We show that a combination of automated high-resolution satellite monitoring and detailed forest C modeling can yield spatially explicit estimates of harvest related C losses and subsequent recovery in support of REDD and other international carbon market mechanisms.

Huang, Maoyi; Asner, Gregory P.

2010-09-30T23:59:59.000Z

235

Coal log pipeline research at University of Missouri. Fourth quarterly report for 1995, October 1, 1995--December 30, 1995  

SciTech Connect (OSTI)

The purpose of this project is to design and develop fast and efficient machines for manufacturing high quality coal logs. During the last three months, efforts were focused on the revision and improvement of the design of the 300-ton hydraulic press machine for coal log production. The conceptual design of the machine has been sent to Automated Resources, Inc. for review. Experiments were conducted on threshold binder (orimulsion) concentration. It showed that for binder concentrations below 1%, the initial weight loss of coal logs (due to chipping of corner) is unaffected by the binder concentration unless the binder concentration is 1% or more. For binder levels above 0.25%, more binder causes less coal log wear after long time or or large number of cycles of circulation through pipe. After 250 cycles in the pipe, binderless coal logs suffer approximately twice the wear of the logs with 1% binder.

Liu, H.

1995-12-31T23:59:59.000Z

236

Variation in physical rock properties determined from sonic logs at a South Texas lignite mine  

E-Print Network [OSTI]

graph1c units and their sonic properties; 6. comparing the sonic logg1ng data with geotechnical test results; 7. applying the tool through the production of physical rock character1zati on maps using the sonic and strat1graphic logs of overburden...graph1c units and their sonic properties; 6. comparing the sonic logg1ng data with geotechnical test results; 7. applying the tool through the production of physical rock character1zati on maps using the sonic and strat1graphic logs of overburden...

Cato, Kerry Don

2012-06-07T23:59:59.000Z

237

A UNIX security log analyzer based on from/to access matrix  

E-Print Network [OSTI]

A UNIX SECURITY LOG ANALYZER BASED ON FROM/TO ACCESS MATRIX A Thesis by S A M E R A H M A D E L - H A J M A H M O U D Submitted to the Office of Graduate Studies of Texas A & M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 2002 Major Subject: Computer Engineering A UNIX SECURITY LOG ANALYZER BASED ON FROM/TO ACCESS MATRIX A Thesis by S A M E R A H M A D E L - H A J M A H M O U D Submitted to the Office of Graduate Studies...

El-Haj Mahmoud, Samer Ahmad

2012-06-07T23:59:59.000Z

238

Optics and Diagnostics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 14 | Next | Last Back to Index Optics Line up of optics after cleaning. Photo Number: 2013-048779...

239

Coal log pipeline research at the University of Missouri. 4th Quarterly report, October 1, 1993--December 31, 1993  

SciTech Connect (OSTI)

This paper is a progress report on a research project aimed at the development of coal log technology. Efforts have been directed at the development of technology for the fabrication of stable coal logs, as well as the energy efficient transport of these logs, in particular by pipelines. Work has been directed at new types of binders, new fabrication presses, the application of polymers to reduce transport losses, and modeling efforts.

Liu, H.

1994-05-01T23:59:59.000Z

240

Parallel optical sampler  

SciTech Connect (OSTI)

An optical sampler includes a first and second 1.times.n optical beam splitters splitting an input optical sampling signal and an optical analog input signal into n parallel channels, respectively, a plurality of optical delay elements providing n parallel delayed input optical sampling signals, n photodiodes converting the n parallel optical analog input signals into n respective electrical output signals, and n optical modulators modulating the input optical sampling signal or the optical analog input signal by the respective electrical output signals, and providing n successive optical samples of the optical analog input signal. A plurality of output photodiodes and eADCs convert the n successive optical samples to n successive digital samples. The optical modulator may be a photodiode interconnected Mach-Zehnder Modulator. A method of sampling the optical analog input signal is disclosed.

Tauke-Pedretti, Anna; Skogen, Erik J; Vawter, Gregory A

2014-05-20T23:59:59.000Z

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Optical Packet Switching -1 Optical Networks  

E-Print Network [OSTI]

Optical Packet Switching - 1 Optical Networks: from fiber transmission to photonic switching Optical Packet Switching Fabio Neri and Marco Mellia TLC Networks Group ­ Electronics Department e.mellia@polito.it ­ tel. 011 564 4173 #12;Optical Packet Switching - 2 · This work is licensed under the Creative Commons

Mellia, Marco

242

Property:Building/SPPurchasedEngyNrmlYrMwhYrLogs | Open Energy Information  

Open Energy Info (EERE)

SPPurchasedEngyNrmlYrMwhYrLogs SPPurchasedEngyNrmlYrMwhYrLogs Jump to: navigation, search This is a property of type String. Logs Pages using the property "Building/SPPurchasedEngyNrmlYrMwhYrLogs" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 0.0 + Sweden Building 05K0004 + 0.0 + Sweden Building 05K0005 + 0.0 + Sweden Building 05K0006 + 0.0 + Sweden Building 05K0007 + 0.0 + Sweden Building 05K0008 + 0.0 + Sweden Building 05K0009 + 0.0 + Sweden Building 05K0010 + 0.0 + Sweden Building 05K0011 + 0.0 + Sweden Building 05K0012 + 0.0 + Sweden Building 05K0013 + 0.0 + Sweden Building 05K0014 + 0.0 + Sweden Building 05K0015 + 0.0 + Sweden Building 05K0016 + 0.0 + Sweden Building 05K0017 + 0.0 +

243

Property:Building/SPPurchasedEngyForPeriodMwhYrLogs | Open Energy  

Open Energy Info (EERE)

SPPurchasedEngyForPeriodMwhYrLogs SPPurchasedEngyForPeriodMwhYrLogs Jump to: navigation, search This is a property of type String. Logs Pages using the property "Building/SPPurchasedEngyForPeriodMwhYrLogs" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 0.0 + Sweden Building 05K0004 + 0.0 + Sweden Building 05K0005 + 0.0 + Sweden Building 05K0006 + 0.0 + Sweden Building 05K0007 + 0.0 + Sweden Building 05K0008 + 0.0 + Sweden Building 05K0009 + 0.0 + Sweden Building 05K0010 + 0.0 + Sweden Building 05K0011 + 0.0 + Sweden Building 05K0012 + 0.0 + Sweden Building 05K0013 + 0.0 + Sweden Building 05K0014 + 0.0 + Sweden Building 05K0015 + 0.0 + Sweden Building 05K0016 + 0.0 +

244

Property:Building/SPPurchasedEngyPerAreaKwhM2Logs | Open Energy Information  

Open Energy Info (EERE)

Logs Logs Jump to: navigation, search This is a property of type String. Logs Pages using the property "Building/SPPurchasedEngyPerAreaKwhM2Logs" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 0.0 + Sweden Building 05K0004 + 0.0 + Sweden Building 05K0005 + 0.0 + Sweden Building 05K0006 + 0.0 + Sweden Building 05K0007 + 0.0 + Sweden Building 05K0008 + 0.0 + Sweden Building 05K0009 + 0.0 + Sweden Building 05K0010 + 0.0 + Sweden Building 05K0011 + 0.0 + Sweden Building 05K0012 + 0.0 + Sweden Building 05K0013 + 0.0 + Sweden Building 05K0014 + 0.0 + Sweden Building 05K0015 + 0.0 + Sweden Building 05K0016 + 0.0 + Sweden Building 05K0017 + 0.0 +

245

Borehole Logging Methods for Exploration and Evaluation of Uranium Deposits (1967)  

Broader source: Energy.gov (indexed) [DOE]

Borehole logging methods for exploration Borehole logging methods for exploration and evaluation o f uranium deposits . Philip H. O d d , Robert F. Bmullad and Carl P. Lathan rej~rinkttl fnlm Mining and Groundwater Geophysiall967 Borehole logging methods for exploration and evaluation of uranium deposits Philip H. Dodd, Robert F. Droullard and Carl P. Lathan US. Atomic Energy Commhwn GmrPd Jtinct&n, Colorado Abstract, M o l e 1 - i s thc geophysical methad mast exten&@ w r t i n the Udtrrd States for exploratio~ md edwtim of wanhi &pod&. dammow lop, C o r n r n d j suppkrnentd with a singbz-pobt msfstailee log, m t l y supply about 80 percent of the bask data for om regerve c W t i o R a d mu& of the w ~ k r 6 . p ~ &ngk inf~nnatio~ Tmck-mounted 'rotmy eqnipmcnt i s EMhmody emphy&& holes usually hwre a nominai b

246

Cost-effective conservation: calculating biodiversity and logging trade-offs in Southeast Asia  

E-Print Network [OSTI]

LETTER Cost-effective conservation: calculating biodiversity and logging trade-offs in Southeast and Evolutionary Biology, Princeton University, Princeton, NJ 08544, USA Keywords Biodiversity conservation; birds-off between economic interests and biodiversity conservation. Here, we provide an empirical examination

Vermont, University of

247

Quantitative interpretation of pulsed neutron capture logs: Part 1 --Fast numerical simulation  

E-Print Network [OSTI]

Jordan G. Mimoun1 , Carlos Torres-Verdi´n2 , and William E. Preeg3 ABSTRACT Pulsed neutron capture (PNC for shoulder-bed effects on R logs acquired in sand- shale laminated reservoirs. Because of diffusion effects responses of pure-sand and pure- shale end members of the sedimentary sequence. We have developed a new

Torres-Verdín, Carlos

248

Learn from Web Search Logs to Organize Search Results Xuanhui Wang  

E-Print Network [OSTI]

and Subject Descriptors: H.3.3 [Informa- tion Search and Retrieval]: Clustering, Search process General TermsLearn from Web Search Logs to Organize Search Results Xuanhui Wang Department of Computer Science Effective organization of search results is critical for improv- ing the utility of any search engine

Zhai, ChengXiang

249

Improving The Referrer-Based Web Log Session Reconstruction Mehran Nadjarbashi-Noghani  

E-Print Network [OSTI]

Improving The Referrer-Based Web Log Session Reconstruction Mehran Nadjarbashi-Noghani Faculty. We extend the conventional referrer-based heuristic to exploit this adaptation in order to achieve with some noisy or incomplete information such as the null referrer. Session reconstruction is the process

Ghorbani, Ali

250

Web user profiling on proxy logs and its evaluation in personalization  

Science Journals Connector (OSTI)

We propose a web user profiling and clustering framework based on LDA-based topic modeling with an analogy to document analysis in which documents and words represent users and their actions. The main technical challenge addressed here is how to symbolize ... Keywords: latent dirichlet allocation, proxy logs based analysis, topic modeling, web user clustering

Hiroshi Fujimoto; Minoru Etoh; Akira Kinno; Yoshikazu Akinaga

2011-04-01T23:59:59.000Z

251

Topic analysis of web user behavior using LDA model on proxy logs  

Science Journals Connector (OSTI)

We propose a web user profiling and clustering framework based on LDA-based topic modeling with an analogy to document analysis in which documents and words represent users and their actions. The main technical challenge addressed here is how to symbolize ... Keywords: latent dirichlet allocation, proxy logs based analysis, topic modeling, web user clustering

Hiroshi Fujimoto; Minoru Etoh; Akira Kinno; Yoshikazu Akinaga

2011-05-01T23:59:59.000Z

252

ForPeerReview Interpretation of hydraulic rock types with resistivity logs in  

E-Print Network [OSTI]

Tertiary turbidite oil reservoirs in the Gulf of Mexico, verify that inclusion of resistivity logs turbidite reservoirs: pore-scale modeling verified with field observations in the Gulf of Mexico, U and Geosystems Engineering Keywords: electrical/resistivity, permeability, modeling, deepwater, Gulf of Mexico

Torres-Verdín, Carlos

253

2012 International Conference on Lightning Protection (ICLP), Vienna, Austria Lightning Observatory in Gainesville (LOG), Florida  

E-Print Network [OSTI]

) and 1(b), respectively. The LOG was originally designed to respond to both natural lightning flashes2012 International Conference on Lightning Protection (ICLP), Vienna, Austria Lightning Observatory, Inc., Tucson, Arizona, USA E-mail: (rakov@ece.ufl.edu) Abstract--The Lightning Observatory

Florida, University of

254

Annual Logging Symposium, June 3-6, 2007 RAPID SIMULATION OF BOREHOLE NUCLEAR MEASUREMENTS  

E-Print Network [OSTI]

MEASUREMENTS WITH APPROXIMATE SPATIAL FLUX-SCATTERING FUNCTIONS A. Mendoza, and C. Torres and benchmark fast approximate numerical procedures to simulate neutron and density porosity logs making use of Monte Carlo-derived spatial flux- scattering functions (FSFs) for specific nuclear tool configurations

Torres-Verdín, Carlos

255

Deep borehole log evidence for fractal distribution of fractures in crystalline rock  

Science Journals Connector (OSTI)

......as well as large scale-lengths...fractures seen in drilling cores and...register on a borehole scanning...rock in the borehole wall. In...evidence in the drilling logs or retrieved...core that large-scale fractures...samples, and drilling history...control the large-scale trend...sensitive to borehole lithology......

Peter Leary

1991-12-01T23:59:59.000Z

256

Weekly Security Incident Log Period of May 27 -Jun 2, 2013  

E-Print Network [OSTI]

/30/2013 02:37 PM Emergency Medical 2013-000958 ROSS BUILDING - NORTH TOWER Subject not Identified SecurityWeekly Security Incident Log Period of May 27 - Jun 2, 2013 Incident No. Reported Date Building and a Facilities Electrician responded to a report that a lamp standard on the north side of the William Small

257

Weekly Security Incident Log Period of Jun 2 -Jun 8, 2014  

E-Print Network [OSTI]

. A description of a suspect was obtained. 6/4/2014 06:39 PM Theft, Under 2014-000979 ROSS BUILDING - NORTH TOWERWeekly Security Incident Log Period of Jun 2 - Jun 8, 2014 Incident No. Reported Date Building Name lot. No injuries were reported. 6/2/2014 06:19 PM Motor Vehicle Incident 2014-000960 TECHNOLOGY

258

Integrated Visualization Schemes for an Information and Communication Web Log Based Management System  

Science Journals Connector (OSTI)

This paper presents a set of visualization methods incorporated in a system for internal technologically mediated communication and information management. This system, which assumes an organizational context and an intranet built on World Wide Web technologies ... Keywords: information visualization, information and communication management, web logs

Oscar Mealha; Beatriz Sousa Santos; Jose Nunes; Florin Zamfir

2004-07-01T23:59:59.000Z

259

Adaptation of the Concept Hierarchy Model with Search Logs for Query Recommendation on Intranets  

E-Print Network [OSTI]

Adaptation of the Concept Hierarchy Model with Search Logs for Query Recommendation on Intranets for query recommendation on Intranets by ranking terms according to the strength of their links to the query for identical queries and rebuilding it from scratch periodically can be extremely inefficient due to the high

Kruschwitz, Udo

260

A Legacy of Low-Impact Logging does not Elevate Prevalence of Potentially Pathogenic Protozoa  

E-Print Network [OSTI]

in Free-Ranging Gorillas and Chimpanzees in the Republic of Congo: Logging and Parasitism in African Apes Center for the Study and Conservation of Apes, Lincoln Park Zoo, Chicago, IL 4 Congo Program, Wildlife Conservation Society, Brazzaville, Republic of Congo 5 Department of Pathobiology, College of Veterinary

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Stream temperature responses to clearcut logging in British Columbia: the moderating influences of  

E-Print Network [OSTI]

Stream temperature responses to clearcut logging in British Columbia: the moderating influences the temperature responses of small, lake- headed streams to streamside timber harvesting. We examined the temperature patterns of two subboreal outlet streams in north-central British Columbia for 1 year before and 3

Hinch, Scott G.

262

Effects of experimental clearcut logging on thermal stratification, dissolved oxygen, and lake  

E-Print Network [OSTI]

à blanc autour de trois lacs dimictiques de 30 à 40 ha du nord-ouest de l'Ontario a été associée à caused sedimentation and nutrient enrichment in streams in various parts of North America (e.g., Brown water quality changes af- ter logging around boreal lakes and streams (Holopainen et al. 1991; Rask et

Wisenden, Brian D.

263

OpLog: a library for scaling update-heavy data structures  

E-Print Network [OSTI]

Existing techniques (e.g., RCU) can achieve good multi-core scaling for read-mostly data, but for update-heavy data structures only special-purpose techniques exist. This paper presents OpLog, a general-purpose library ...

Boyd-Wickizer, Silas

2014-09-16T23:59:59.000Z

264

Annual Logging Symposium, June 22-26, 2013 PORE-SCALE MODELING OF ELECTRICAL RESISTIVITY  

E-Print Network [OSTI]

. Electrical resistivity is calculated with a finite- difference solution of Kirchhoff's voltage law appliedSPWLA 54th Annual Logging Symposium, June 22-26, 2013 1 PORE-SCALE MODELING OF ELECTRICAL RESISTIVITY AND PERMEABILITY IN FIB-SEM IMAGES OF HYDROCARBON-BEARING SHALE Vahid Shabro, Shaina Kelly, Carlos

Torres-Verdín, Carlos

265

Capacitive conductivity logging and electrical stratigraphy in a high-resistivity aquifer, Boise Hydrogeophysical Research Site  

E-Print Network [OSTI]

Capacitive conductivity logging and electrical stratigraphy in a high-resistivity aquifer, Boise . Examining such a high-resistivity system provides a good test for the ca- pacitive-conductivity tool because the conventional induc- tion-conductivity tool known to have limited effectiveness in high-resistivity systems did

Barrash, Warren

266

Seneca Creek Associates, LLC Wood Resources International, LLC "Illegal" Logging and Global Wood Markets  

E-Print Network [OSTI]

Seneca Creek Associates, LLC Wood Resources International, LLC SUMMARY "Illegal" Logging and Global Wood Markets: The Competitive Impacts on the U.S. Wood Products Industry Prepared for: American Forest Phone: 1-202-463-2713 Fax: 1-202- 463-4703 E-mail: agoetzl@sencreek.com Wood Resources International

267

Speech enhancement by joint statistical characterization in the Log Gabor Wavelet domain  

Science Journals Connector (OSTI)

In speech enhancement, Bayesian Marginal models cannot explain the inter-scale statistical dependencies of different wavelet scales. Simple non-linear estimators for wavelet-based denoising assume that the wavelet coefficients in different scales are ... Keywords: Bayesian bivariate estimator, Circularly Symmetric Probability Density Function, Log Gabor Wavelet, Speech enhancement, Speech recognition, Spherically Invariant Random Processes

Suman Senapati; Sandipan Chakroborty; Goutam Saha

2008-06-01T23:59:59.000Z

268

Optics and Optical Engineering Program Assessment Plan Program Learning Objectives  

E-Print Network [OSTI]

Optics and Optical Engineering Program Assessment Plan Program Learning, and processes that underlie optics and optical engineering. 2. Strong understanding of the fundamental science, mathematics, and processes that underlie optics and optical

Cantlon, Jessica F.

269

Salvage logging and forest renewal affect early aspen stand structure after catastrophic wind  

Science Journals Connector (OSTI)

Abstract Among the major natural disturbances that occur in the North American boreal forest, the effects of catastrophic wind are the least studied due to its infrequent occurrence, often in inaccessible areas, and lack of rapid research response. Most documented studies have been conducted in conifer or mixedwood forests and generally have not considered follow up forest renewal operations such as salvage logging followed by planting and tending. In 2006 after a severe wind disturbance in trembling aspen (Populus tremuloides Michx.) forest in northeastern Ontario, we established an operational study to investigate the effects of post-wind disturbance treatments on stand structure (residual live trees, snags, and downed wood) and early forest regeneration. The treatments were blowdown (B), blowdown followed by salvage logging (BS), blowdown followed by salvage logging, windrowing and planting (BSP), BSP followed by aerial spray (tending) with glyphosate 1year after planting (BSPT), and clearcut (C). The operational salvage logging removed about 55% of the 60 m3 ha?1 of the snags and 15% of the 390 m3 ha?1 of the coarse downed wood. The relatively low rate of salvage removal increased the abundance (density and stocking) of aspen regeneration and reduced moss cover, but did not affect average height of aspen suckers or the abundance (cover) of other vegetation types. The mechanical operations damaged much of the advanced growth of conifers (mostly black spruce and balsam fir (Abies balsamea (L.) Mill.) released by the wind. However, these stems were not sufficiently abundant to contribute significantly to the regenerating forest. Windrowing before planting slightly reduced the amount of area covered by downed wood, while the tending reduced broadleaf regeneration and the abundance of shrubs and increased conifer regeneration and the abundance of grasses. If the management objective is to renew aspen forests lost to catastrophic wind, salvage logging is a viable option to clear the site for regeneration. Forest renewal treatments, including planting and tending, are required when the management objective is conifer regeneration.

Rongzhou Man; Han Y.H. Chen; Andrew Schafer

2013-01-01T23:59:59.000Z

270

Optical microphone  

DOE Patents [OSTI]

An optical microphone includes a laser and beam splitter cooperating therewith for splitting a laser beam into a reference beam and a signal beam. A reflecting sensor receives the signal beam and reflects it in a plurality of reflections through sound pressure waves. A photodetector receives both the reference beam and reflected signal beam for heterodyning thereof to produce an acoustic signal for the sound waves. The sound waves vary the local refractive index in the path of the signal beam which experiences a Doppler frequency shift directly analogous with the sound waves.

Veligdan, James T. (Manorville, NY)

2000-01-11T23:59:59.000Z

271

Coal log pipeline research at the University of Missouri. 3rd Quarterly report, July 1, 1993--September 30, 1993  

SciTech Connect (OSTI)

This report summarizes a research program on the transport of coal by formation of coal logs, and subsequent transport in pipelines. Separate projects within this program address questions on the formation of the coal logs, flow in pipelines, including slurry pipelines, interaction with water, wear in pipelines, and questions on economics and legal aspects.

Liu, H.

1994-05-01T23:59:59.000Z

272

Outage Log  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1814 4:45 PST 111814 10:18 PST Project Unavailable. 111214 0:22 PST - Hopper IDLMATLABMathematica unavailable on Hopper. 111214 0:22 PST - Edison IDLMATLABMathematica...

273

Hislop Log  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Occurrence Reporting Land Lines - Dial 9 - 911 Cell Phones - Dial 911 Reporting Emergencies As the Commerce Park Offices are not within the Oak Ridge National Laboratory...

274

Optical data latch  

DOE Patents [OSTI]

An optical data latch is formed on a substrate from a pair of optical logic gates in a cross-coupled arrangement in which optical waveguides are used to couple an output of each gate to an photodetector input of the other gate. This provides an optical bi-stability which can be used to store a bit of optical information in the latch. Each optical logic gate, which can be an optical NOT gate (i.e. an optical inverter) or an optical NOR gate, includes a waveguide photodetector electrically connected in series with a waveguide electroabsorption modulator. The optical data latch can be formed on a III-V compound semiconductor substrate (e.g. an InP or GaAs substrate) from III-V compound semiconductor layers. A number of optical data latches can be cascaded to form a clocked optical data shift register.

Vawter, G. Allen (Corrales, NM)

2010-08-31T23:59:59.000Z

275

Pressure Temperature Log At Steamboat Springs Area (Combs, Et Al., 1999) |  

Open Energy Info (EERE)

Steamboat Springs Area (Combs, Et Al., 1999) Steamboat Springs Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Pressure Temperature Log At Steamboat Springs Area (Combs, Et Al., 1999) Exploration Activity Details Location Steamboat Springs Area Exploration Technique Pressure Temperature Log Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Downhole data during production and injection tests were acquired using pressure/temperature/spinner (PTS) tools from two dtierent service companies. Although details differed, all the commercial downhole instruments were designed to take data and to transmit that data uphole in real time, using a singleconductor wireline. All the instruments (each company used more than one) employed a dewar, or thermal flasIq to protect

276

LLNL CATEGORICAL EXCLUSION DETERMINATION FORM ESPD LOG No: !ESH-EFA-NEPA-12-26401  

Broader source: Energy.gov (indexed) [DOE]

CATEGORICAL EXCLUSION DETERMINATION FORM CATEGORICAL EXCLUSION DETERMINATION FORM ESPD LOG No: !ESH-EFA-NEPA-12-26401 I NNSA/LSO LoG No: !NA-12-2~ 1. PROJECT/ACTIVITY TITLE: RADIOGRAPHY OF EXPLOSIVE SAMPLES 8321 C 2. PROJECT DESCRIPTION: I DATE: 8/13/2012 This proposed project would use existing radiography systems located in B321 C to provide useful, non-destntctive, three dimensional imaging and characterization of explosive samples. Current B321 C operations include non- destructive evaluations of up to 10 mg of explosive samples. Storage and use of explosives are controlled to ensure that the facility limits are within the definitions of a LSI hazard classification. The total building inventory of explosives shall not exceed 200 grams for all types of explosives except for Hazard Division 1.4S materials meeting the conditions stated below. The room inventoty

277

Resistivity Log At The Needles Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Log At The Needles Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At The Needles Area (DOE GTP) Exploration Activity Details Location The Needles Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Resistivity_Log_At_The_Needles_Area_(DOE_GTP)&oldid=689880" Categories: Exploration Activities

278

Resistivity Log At Fort Bliss Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Log At Fort Bliss Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Fort Bliss Area (DOE GTP) Exploration Activity Details Location Fort Bliss Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Resistivity_Log_At_Fort_Bliss_Area_(DOE_GTP)&oldid=689878" Categories: Exploration Activities

279

Acoustic Logs At Steamboat Springs Area (Combs, Et Al., 1999) | Open Energy  

Open Energy Info (EERE)

Steamboat Springs Area (Combs, Et Al., 1999) Steamboat Springs Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Acoustic Logs At Steamboat Springs Area (Combs, Et Al., 1999) Exploration Activity Details Location Steamboat Springs Area Exploration Technique Acoustic Logs Activity Date Usefulness useful DOE-funding Unknown Notes Two other Sandia instruments were used briefly: the acoustic borehole televiewer (BHTV) yielded wellbore images down to 520';and a Sandia memory tool gave pressuretemperature data for a shut-in test at the end of the project. Because no oriented core has been collected in this field, the televiewer images giving fracture direction were extremely M.ormative, but the BHTV could not be used at greater depths because of its temperature

280

LLNL CATEGORICAL EXCLUSION DETERMINATION FORM ESPD LOG No: !ESH-EFA-NEPA-12-26401  

Broader source: Energy.gov (indexed) [DOE]

CATEGORICAL EXCLUSION DETERMINATION FORM CATEGORICAL EXCLUSION DETERMINATION FORM ESPD LOG No: !ESH-EFA-NEPA-12-26401 I NNSA/LSO LoG No: !NA-12-2~ 1. PROJECT/ACTIVITY TITLE: RADIOGRAPHY OF EXPLOSIVE SAMPLES 8321 C 2. PROJECT DESCRIPTION: I DATE: 8/13/2012 This proposed project would use existing radiography systems located in B321 C to provide useful, non-destntctive, three dimensional imaging and characterization of explosive samples. Current B321 C operations include non- destructive evaluations of up to 10 mg of explosive samples. Storage and use of explosives are controlled to ensure that the facility limits are within the definitions of a LSI hazard classification. The total building inventory of explosives shall not exceed 200 grams for all types of explosives except for Hazard Division 1.4S materials meeting the conditions stated below. The room inventoty

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Resistivity Log At Fish Lake Valley Area (DOE GTP) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Log At Fish Lake Valley Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Fish Lake Valley Area (DOE GTP) Exploration Activity Details Location Fish Lake Valley Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness not indicated DOE-funding Unknown References (1 January 2011) GTP ARRA Spreadsheet Retrieved from "http://en.openei.org/w/index.php?title=Resistivity_Log_At_Fish_Lake_Valley_Area_(DOE_GTP)&oldid=689876" Categories:

282

Quantification of Wellbore Leakage Risk Using Non?destructive Borehole Logging Techniques  

SciTech Connect (OSTI)

Well integrity is important at all potential CCS locations and may play a crucial role establishing leakage risk in areas where there is a high density of existing wells that could be impacted by the storage operations including depleted petroleum fields where EOR or CCS will occur. To address a need for risk quantification methods that can be directly applied to individual wells using borehole logging tools a study was conducted using data from five wells in Wyoming. The objectives of the study were: Objective 1 Develop methods to establish the baseline flow parameters (porosity and permeability or mobility) from individual measurements of the material properties and defects in a well. Objective 2 Develop a correlation between field flow?property data and cement logs that can be used to establish the flow?properties of well materials and well features using cement mapping tools. Objective 3 Establish a method that uses the flow?property model (Objective 2) to analyze the statistical uncertainties associated with individual well leakage that can provide basis for uncertainty in risk calculations. The project objectives were met through the logging of five wells in Carbon and Natrona County Wyoming to collect data that was used to estimate individual and average well flow properties and model the results using ultrasonic data collected during the logging. Three of the five wells provided data on point and average flow properties for well annuli. Data from the other two wells were used to create models of cement permeability and test whether information collected in one well could be used to characterize another well. The results of the in?situ point measurements were confirmed by the lab measurements sidewall cores collected near the same depths Objective 1 was met using the data collected through logging, testing, and sampling. The methods were developed that can establish baseline flow parameters of wells by both point and average test methods. The methods to estimate the flow properties modeling of point pressure tests, modeling of vertical interference tests, and laboratory measurement of cased?hole sidewall cores The wells were in sufficiently good shape to allow the development of the characterization methods while still having enough defects to study differences in results as they relate to well integrity. Samples and tests analyzed from three of five wells studied in showed the cements were largely intact and had not degraded from exposure native brines. Log results taken in conjunction with the core measurements indicate that interfaces and/or problems with cement placement due to eccentering provide preferential flow paths for fluids, which can increase the effective permeability of the barrier several orders of magnitude above the permeability of intact cement. The results of the maps created using logging tools indicating that the cement condition and bond are generally good identify a need for more research to understand how logs can be used to predict effective well permeabilities such as those measured by the VITs in this study.

Duguid, Andrew; Butsch, Robert; Cary, J.; Celia, Michael; Chugunov, Nikita; Gasda, Sarah; Hovorka, Susan; Ramakrishnan, T. S.; Stamp, Vicki; Thingelstad, Rebecca; Wang, James

2014-05-31T23:59:59.000Z

283

Improvement of epidemiological data analysis by unbiased estimates of log-normal dose distribution  

Science Journals Connector (OSTI)

The effects of radiation on population and risk assessment are studied through epidemiological studies that are heavily dependent on dose distribution. Radiation doses to individual workers follow a log-normal distribution. Computation of the collective dose with the minimum detectable values (Detection Limit or DL) as zero is biased. Hence the expectation value of the 'missed' doses is computed as the ratio of the collective dose of all dosimeters with DL to the product of the total number of dosimeters. So far, in all epidemiological studies, doses below DL are set equal to the DL itself and yield a positive bias in the dose-response relation. This paper presents an enhanced method by removing the bias with the help of the Expectation Maximisation (EM) algorithm. This algorithm, along with unbiased characteristic estimates of log-normal distribution, significantly improves the estimation of confounders by 95%, and improves the dose-response relationship.

Joyeeta Mukhopadhyaya; D. Datta; H.S. Kushwaha

2007-01-01T23:59:59.000Z

284

A real-time borehole correction of electromagnetic wave resistivity logging while drilling  

Science Journals Connector (OSTI)

Abstract The response of electromagnetic wave logging while drilling is influenced greatly by borehole and drilling fluid resistivity when the size of borehole is relatively large and drilling fluid resistivity is low. Borehole radius and drilling fluid resistivity were introduced to obtain more accurate transformed resistivity on the basis of the commonly used resistivity transformation model. The influence of borehole was considered in the newly established three dimensional transformation model, and a new borehole correction method was proposed. The resistivity transformation database can be established by calculation according to a certain instrument, and the true resistivity is obtained by three dimensional interpolation search technology of real-time correction in practical use. The results of numerical simulation and modeling verification show that the transformed resistivity by real-time correction coincides with the resistivity corrected by charts. The method can eliminate the borehole influence, reduce calculation dimension, and improve the inversion efficiency of highly deviated and horizontal wells logging data.

Zhen YANG; Jinzhou YANG; Laiju HAN

2013-01-01T23:59:59.000Z

285

Solid Waste Information and Tracking System (SWITS) data change request log  

SciTech Connect (OSTI)

The Data Change Request (DCR) log is designed to promote data integrity within the Solid Waste Information and Tracking System (SWITS). It achieves this function by providing a record of all data changes performed on the database. This document contains records of those data changes from March 91 through June 94. The DCR log is also a supplement to an electronic database -- the DCR Tracking System, which provides an electronic record of all data changes preformed on the SWITS database. The records found in this document are Data Change Request forms. These forms are required for SWITS users who wish to request data changes in the database. The procedure formalizing this policy did not go into effect until September 1, 1994; therefore, some records created before that date may be incomplete.

McKay, R.B.

1994-08-18T23:59:59.000Z

286

A Uniqueness Result for Minimizers of the 1D Log-gas Renormalized Energy  

E-Print Network [OSTI]

Sandier and Serfaty studied the one-dimensional Log-gas model, in particular they gave a crystallization result by showing that the one-dimensional lattice $\\mathbb{z}$ is a minimizer for the so-called renormalized energy which they obtained as a limit of the $N$-particle Log-gas Hamiltonian for $N \\to \\infty$. However, this minimizer is not unique among infinite point configurations (for example small perturbations of $\\mathbb{z}$ leave the renormalized energy unchanged). In this paper, we establish that uniqueness holds at the level of (stationary) point processes, the only minimizer being given by averaging $\\mathbb{z}$ over a choice of the origin in $[0,1]$. This is proved by showing a quantitative estimate on the two-point correlation function of a process in terms of its renormalized energy.

Thomas Lebl

2014-08-10T23:59:59.000Z

287

Density Log at Valles Caldera - Redondo Area (Wilt & Haar, 1986) | Open  

Open Energy Info (EERE)

Valles Caldera - Redondo Area (Wilt & Haar, 1986) Valles Caldera - Redondo Area (Wilt & Haar, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Density at Valles Caldera - Redondo Area (Wilt & Haar, 1986) Exploration Activity Details Location Valles Caldera - Redondo Area Exploration Technique Density Log Activity Date Usefulness not indicated DOE-funding Unknown Notes The density log indicates three major density units within the well section : a surface layer of caldera fill, lake deposits, and other recent alluvium (2.12 g/cm3); the Bandelier Tuff and underlying volcanic and sedimentary units (2.3--2.5 g/cm3); and the basement unit, consisting of the lower Paleozoic and the upper Precambrian (2.65 g/cm3). There are, of course, significant density variations within each unit, but for modeling

288

Analysis of historical gross gamma logging data from BY tank farm  

SciTech Connect (OSTI)

Gross gamma ray logs, recorded from January 1975 through mid-year 1994 as part of the Single-Shell Tank Farm Dry Well Surveillance Program, have been reanalyzed for the BY tank farm to locate the presence of mobile radionuclides in the subsurface. This report presents the BY tank farm gross gamma ray data in such a way as to assist others in their study of vadose zone mechanisms.

MYERS, D.A.

1999-10-13T23:59:59.000Z

289

Analysis of historical gross gamma logging data from BX tank farm  

SciTech Connect (OSTI)

Gross gamma ray logs, recorded from January 1975 through mid-year 1994 as part of the Single-Shell Tank Farm Dry Well Surveillance Program, have been reanalyzed for the BX tank farm to locate the presence of mobile radionuclides in the subsurface. This report presents the BX tank farm gross gamma ray data in such a way as to assist others in their study of vadose zone mechanism.

MYERS, D.A.

1999-10-12T23:59:59.000Z

290

Weekly Security Incident Log Period of Apr 28 -May 4, 2014  

E-Print Network [OSTI]

member who was previously trespassed from campus several years prior. No further action was required. 5/2 transported the individual to hospital for further medical care. 5/2/2014 10:10 AM Emergency Medical 2014 in a washroom. 5/2/2014 03:18 PM Theft, Under Printed: 5/5/2014 4:13:20 PM 1Weekly Security Incident Log Period

291

Recognition of hydrocarbon expulsion using well logs: Bakken Formation, Williston Basin  

SciTech Connect (OSTI)

The Upper Mississippian-Lower Devonian Bakken Formation forms a source/carrier/reservoir system in the Williston basin. Hydrocarbon expulsion within the Bakken has been identified by overlaying sonic and resistivity logs. Typically, these curves track in organically lean, water-saturated mudrocks because both respond mainly to porosity; however, in thermally mature organic-rich rocks and hydrocarbon reservoirs or carrier beds, the curves separate due to the anomalously high resistivity associated with replacement of pore water by hydrocarbons. Sonic/resistivity-log overlays for wells throughout the Montana and North Dakota parts of the Williston basin reveal significant increases and maximum in-curve separation within the middle siltstone member of the Bakken at subsurface temperatures of about 170 and 200{degree}F, respectively. Sequence-stratigraphic characteristics of the Bakken define the framework within which the expulsion process operates. The organic-rich upper and lower shale members represent the transgressive and early highstand systems tracts of two adjacent depositional sequences. A sequence boundary within the intervening middle siltstone member separates nearshore siltstone and sandstone of the late highstand systems tract in the lower sequence from cross-bedded subtidal to intertidal sandstones of the lowstand systems tract in the upper sequence. Reservoir properties vary across this sequence boundary. The authors attribute the log separation in the siltstone member to hydrocarbons expelled from the adjacent shales. Abrupt shifts in several geochemical properties of the shale members, indicative of hydrocarbon generation occur over the same subsurface temperature range as the rapid increase in log separation in the middle siltstone, thus indicating the contemporaneity of generation and expulsion.

Cunningham, R.; Zelt, F.B.; Morgan, S.R.; Passey, Q.R. (Exxon Production Research Co., Houston, TX (USA)); Snavely, P.D. III; Webster, R.L. (Exxon Co., U.S.A., Houston, TX (USA))

1990-05-01T23:59:59.000Z

292

Optics and Diagnostics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 14 | Next | Last Back to Index Optics Optics processing of Target Wedged Focus Lens into cleaningcoating frame. Photo Number: 2013-048765...

293

Optics and Diagnostics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 14 | Next | Last Back to Index Optics Alignment Conducting an optics alignment after replacement of a Pockels Cell in the clean room. Photo Number: 2013-050691...

294

Optics and Diagnostics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

9 14 | Next | Last Back to Index Optics Processing Optics for the National Ignition Facility must be manufactured to exacting standards. To ensure quality, precise measurements...

295

Calibration facilities at Hanford for gamma-ray and fission-neutron well logging  

SciTech Connect (OSTI)

Well-logging tools that detect gamma rays emitted from earth formations need to be calibrated in appropriate facilities to provide quantitative assessments of concentrations o radionuclides based on detected gamma rays. These facilities are typically special models having a hole to insert tools and having sufficient physical size to simulate actual earth formations containing known amounts of radionuclides. The size, generally 3 to 5 feet in diameter and 4 to 6 feet tall, is such that the source of radiation appears infinite in extent to a tool detecting the radiation inside the model. Such models exist at Hanford as concrete cylinders having a central borehole and containing known, enhanced amounts of K, U, and Th. Data collected in these models allow calibration of the logging system to measure radionuclide concentrations in formations around boreholes in the field. The accuracy of the calculated field concentrations depends on the correctness of the original calibration, the statistical precision of the data, and the similarity of the logging conditions to the calibration conditions. Possible methods for analyzing the data collected in the calibration facilities are presented for both spectral and total-count gamma-ray systems. Corrections are typically needed for the effects of steel casing in boreholes and the presence of water rather than air in the holes. Data collected in the calibration models with various steel casings and borehole fluids allow such correction factors to be determined.

Stromswold, D.C.

1994-07-01T23:59:59.000Z

296

Lithology determination from well logs with fuzzy associative memory neural network  

SciTech Connect (OSTI)

An artificial intelligence technique of fuzzy associative memory is used to determine rock types from well-log signatures. Fuzzy associative memory (FAM) is a hybrid of neutral network and fuzzy expert system. This new approach combines the learning ability of neural network and the strengths of fuzzy linguistic modeling to adaptively infer lithologies from well-log signatures based on (1) the relationships between the lithology and log signature that the neural network have learned during the training and/or (2) geologist`s knowledge about the rocks. The method is applied to a sequence of the Ordovician rock units in northern Kansas. This paper also compares the performances of two different methods, using the same data set for meaningful comparison. The advantages of FAM are (1) expert knowledge acquired by geologists is fully utilized; (2) this knowledge is augmented by the neural network learning from the data, when available; and (3) FAM is transparent in that the knowledge is explicitly stated in the fuzzy rules.

Chang, H.C.; Chen, H.C.; Fang, J.H. [Univ. of Alabama, Tuscaloosa, AL (United States)

1997-05-01T23:59:59.000Z

297

State of fallen logs and the occurrence of conifer seedlings and saplings in boreal and subalpine old-growth forests in Japan  

Science Journals Connector (OSTI)

Fallen logs on the forest floor play an important role in tree ... seedling establishment in boreal and subalpine old-growth forests. We examined the abundance and state ( ... their surfaces) of fallen logs on th...

Yoshiko Narukawa; Shigeo Iida; Hiroyuki Tanouchi; Shin Abe

2003-05-01T23:59:59.000Z

298

Optical NAND gate  

SciTech Connect (OSTI)

An optical NAND gate is formed from two pair of optical waveguide devices on a substrate, with each pair of the optical waveguide devices consisting of an electroabsorption modulator and a photodetector. One pair of the optical waveguide devices is electrically connected in parallel to operate as an optical AND gate; and the other pair of the optical waveguide devices is connected in series to operate as an optical NOT gate (i.e. an optical inverter). The optical NAND gate utilizes two digital optical inputs and a continuous light input to provide a NAND function output. The optical NAND gate can be formed from III-V compound semiconductor layers which are epitaxially deposited on a III-V compound semiconductor substrate, and operates at a wavelength in the range of 0.8-2.0 .mu.m.

Skogen, Erik J. (Albuquerque, NM); Raring, James (Goleta, CA); Tauke-Pedretti, Anna (Albuquerque, NM)

2011-08-09T23:59:59.000Z

299

Determination of capillary displacement pressure and representative average capillary pressure vs. depth in shally sandstones from well logs  

SciTech Connect (OSTI)

This research presents a method whereby the capillary displacement pressure Pcd and the representative average capillary pressure in shaly sandstone reservoirs exhibits continuous information vs. depth from well logs. By the aid of special core analysis, correlation functions were obtained that relate the capillary characteristics of the reservoir rock to its lithologic development. Since the lithologic influence factor is a well log-derived parameter the correlations then were used to determine by means of well logs the capillary displacement and average capillary pressures for borehole sections where special core analysis is not available. This technique has been developed and applied to the shaly sandstone reservoir of the Sarir oil field in Libya.

Barlai, Z.; Berruin, N.A.; Mawla, R.A.

1981-01-01T23:59:59.000Z

300

Fiber optic connector  

DOE Patents [OSTI]

A fiber optic connector and method for connecting composite materials within which optical fibers are imbedded. The fiber optic connector includes a capillary tube for receiving optical fibers at opposing ends. The method involves inserting a first optical fiber into the capillary tube and imbedding the unit in the end of a softened composite material. The capillary tube is injected with a coupling medium which subsequently solidifies. The composite material is machined to a desired configuration. An external optical fiber is then inserted into the capillary tube after fluidizing the coupling medium, whereby the optical fibers are coupled.

Rajic, Slobodan (Knoxville, TN); Muhs, Jeffrey D. (Lenior City, TN)

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Optical NOR gate  

DOE Patents [OSTI]

An optical NOR gate is formed from two pair of optical waveguide devices on a substrate, with each pair of the optical waveguide devices consisting of an electroabsorption modulator electrically connected in series with a waveguide photodetector. The optical NOR gate utilizes two digital optical inputs and a continuous light input to provide a NOR function digital optical output. The optical NOR gate can be formed from III-V compound semiconductor layers which are epitaxially deposited on a III-V compound semiconductor substrate, and operates at a wavelength in the range of 0.8-2.0 .mu.m.

Skogen, Erik J. (Albuquerque, NM); Tauke-Pedretti, Anna (Albuquerque, NM)

2011-09-06T23:59:59.000Z

302

The usability of switchgrass, rice straw, and logging residue as feedstocks for power generation in East Texas  

E-Print Network [OSTI]

This thesis examines the economic implications of using agriculturally based feedstock for bio-energy production in East Texas. Specifically I examined the use of switchgrass, rice straw, and logging residue as a feedstock for electrical power...

Hong, Sung Wook

2007-09-17T23:59:59.000Z

303

Stability of finite difference numerical simulations of acoustic logging-while-drilling with different perfectly matched layer schemes  

Science Journals Connector (OSTI)

In acoustic logging-while-drilling (ALWD) finite difference in time domain (FDTD) simulations, large drill collar occupies, most of the fluid-filled borehole and divides the borehole fluid into two thin fluid col...

Hua Wang; Guo Tao; Xue-Feng Shang; Xin-Ding Fang; Daniel R. Burns

2013-12-01T23:59:59.000Z

304

Application of Multi-rate Flowing Fluid Electric ConductivityLogging Method to Well DH-2, Tono Site, Japan  

SciTech Connect (OSTI)

The flowing fluid electric conductivity (FEC) logging method, wellbore fluid is replaced with de-ionized water, following which FEC profiles in the wellbore are measured at a series of times while the well is pumped at a constant rate. Locations were fluid enters the wellbore show peaks in the FEC logs, which may be analyzed to infer inflow strengths and salinities of permeable features intersected by the wellbore. In multi-rate flowing FEC logging, the flowing FEC logging method is repeated using two or more pumping rates, which enables the transmissivities and inherent pressure heads of these features to be estimated as well. We perform multi-rate FEC logging on a deep borehole in fractured granitic rock, using three different pumping rates. Results identify 19 hydraulically conducting fractures and indicate that transmissivity, pressure head, and salinity vary significantly among them. By using three pumping rates rather than the minimum number of two, we obtain an internal consistency check on the analysis that provides a measure of the uncertainty of the results. Good comparisons against static FEC profiles and against independent chemical, geological, and hydrogeological data have further enhanced confidence in the results of the multi-rate flowing FEC logging method.

Doughty, Christine; Takeuchi, Shinji; Amano, Kenji; Shimo, Michito; Tsang, Chin-Fu

2004-10-04T23:59:59.000Z

305

A log-exponential smoothing method for mathematical programs with complementarity constraints  

Science Journals Connector (OSTI)

In this paper a log-exponential smoothing method for mathematical programs with complementarity constraints (MPCC) is analyzed, with some new interesting properties and convergence results provided. It is shown that the stationary points of the resulting smoothed problem converge to the strongly stationary point of MPCC, under the linear independence constraint qualification (LICQ), the weak second-order necessary condition (WSONC), and some reasonable assumption. Moreover, the limit point satisfies the weak second-order necessary condition for MPCC. A notable fact is that the proposed convergence results do not restrict the complementarity constraint functions approach to zero at the same order of magnitude.

Yanyan Li; Tao Tan; Xingsi Li

2012-01-01T23:59:59.000Z

306

High-voltage supply for neutron tubes in well-logging applications  

DOE Patents [OSTI]

A high voltage supply is provided for a neutron tube used in well logging. The biased pulse supply of the invention combines DC and full pulse techniques and produces a target voltage comprising a substantial negative DC bias component on which is superimposed a pulse whose negative peak provides the desired negative voltage level for the neutron tube. The target voltage is preferably generated using voltage doubling techniques and employing a voltage source which generates bipolar pulse pairs having an amplitude corresponding to the DC bias level.

Humphreys, D.R.

1982-09-15T23:59:59.000Z

307

Latching micro optical switch  

DOE Patents [OSTI]

An optical switch reliably maintains its on or off state even when subjected to environments where the switch is bumped or otherwise moved. In addition, the optical switch maintains its on or off state indefinitely without requiring external power. External power is used only to transition the switch from one state to the other. The optical switch is configured with a fixed optical fiber and a movable optical fiber. The movable optical fiber is guided by various actuators in conjunction with a latching mechanism that configure the switch in one position that corresponds to the on state and in another position that corresponds to the off state.

Garcia, Ernest J; Polosky, Marc A

2013-05-21T23:59:59.000Z

308

Quantitative analysis of basin-scale heterogeneities using sonic-log data in the Yanchang Basin  

Science Journals Connector (OSTI)

A random medium is used to investigate reservoir heterogeneities in this study. Random media are characterized by autocorrelation functions that allow a construction of spatially anisotropic random structures with different correlation lengths and fluctuation standard deviations. Based on the analysis, we calculate a power spectrum using fast Fourier transform (FFT), which is observed in spatial wavelengths ranging from a few metres to a few thousand metres. Correlation distance and root mean square (RMS) height are directly obtained from the power spectrum. Numerical experiments show that the correlation length and fluctuation standard deviation can cause correlation distance and RMS height undergoing variations. Combining the characteristics of statistical parameters and sonic-log data, we quantitatively analyse the reservoir heterogeneities in the Yanchang Basin. The correlation distance and RMS height of coarse lithofacies in fluvial sandstones interpret a high-energy deposit and strong heterogeneity, affected by different lithological combinations. The correlation lengths decrease gradually from shales, tight sands to gas-bearing sands. Using the sonic-log data from 28 wells in the Yanchang Basin, we compute the isolines of correlation distances and RMS heights for both the He-8 and Shan-1 members in the studied area, which present a correlation with the distribution of gas. This offers an improved foundation for reservoir lateral prediction.

He-Zhen Wu; Li-Yun Fu; Hong-Kui Ge

2010-01-01T23:59:59.000Z

309

Use of dipmeter logs to refine structural mapping of Teapot Dome, Wyoming  

SciTech Connect (OSTI)

Teapot field, now Naval Petroleum Reserve 3, is an elongated, asymmetric structural dome with a north-northeast axial trend located on the southwest edge of the Powder River basin. Currently, more than 800 wells of various depths penetrate multiple reservoirs; over 30 dipmeter logs have been run during the past 34 years. Although structure contour maps of individual stratigraphic horizons have been drawn simply from conventional well data, more subtle features of deformation are interpreted from the use of dipmeter logs. Because dips are generally less than 15/sup 0/, careful computation of transverse and longitudinal dip directions was required for detailed structural analysis. All depth, dip, and azimuth data were entered into computer files, and a flow chart of steps for computer processing and structural interpretation was devised and followed. As designed by C.A. Bengston, SCAT (Statistical Curvature Analysis Technique) plots were drawn by computer. Interpretation of SCAT plots yielded quantitative descriptions of the asymmetry of Teapot dome, curvature of the anticlinal axial plane, vertical discontinuity of beds, location and orientation of normal faults, and curvature of beds in drag zones adjacent to faults. Structural definition was necessary to outline boundaries of reservoirs with tilted fluid contacts on the flanks of the dome and along fault planes. Location of such faults would be particularly important for the discovery of deeper pools, for instance, in the Tensleep Formation.

Beinkafner, K.J.

1986-08-01T23:59:59.000Z

310

Induction log responses to layered, dipping, and anisotropic formations: Induction log shoulder-bed corrections to anisotropic formations and the effect of shale anisotropy in thinly laminated sand/shale sequences  

SciTech Connect (OSTI)

Induction log responses to layered, dipping, and anisotropic formations are examined analytically. The analytical model is especially helpful in understanding induction log responses to thinly laminated binary formations, such as sand/shale sequences, that exhibit macroscopically anisotropic: resistivity. Two applications of the analytical model are discussed. In one application we examine special induction log shoulder-bed corrections for use when thin anisotropic beds are encountered. It is known that thinly laminated sand/shale sequences act as macroscopically anisotropic: formations. Hydrocarbon-bearing formations also act as macroscopically anisotropic formations when they consist of alternating layers of different grain-size distributions. When such formations are thick, induction logs accurately read the macroscopic conductivity, from which the hydrocarbon saturation in the formations can be computed. When the laminated formations are not thick, proper shoulder-bed corrections (or thin-bed corrections) should be applied to obtain the true macroscopic formation conductivity and to estimate the hydrocarbon saturation more accurately. The analytical model is used to calculate the thin-bed effect and to evaluate the shoulder-bed corrections. We will show that the formation resistivity and hence the hydrocarbon saturation are greatly overestimated when the anisotropy effect is not accounted for and conventional shoulder-bed corrections are applied to the log responses from such laminated formations.

Hagiwara, Teruhiko

1996-12-31T23:59:59.000Z

311

High bandwidth optical mount  

DOE Patents [OSTI]

An optical mount, which directs a laser beam to a point by controlling the position of a light-transmitting optic, is stiffened so that a lowest resonant frequency of the mount is approximately one kilohertz. The optical mount, which is cylindrically-shaped, positions the optic by individually moving a plurality of carriages which are positioned longitudinally within a sidewall of the mount. The optical mount is stiffened by allowing each carriage, which is attached to the optic, to move only in a direction which is substantially parallel to a center axis of the optic. The carriage is limited to an axial movement by flexures or linear bearings which connect the carriage to the mount. The carriage is moved by a piezoelectric transducer. By limiting the carriage to axial movement, the optic can be kinematically clamped to a carriage.

Bender, Donald A. (Dublin, CA); Kuklo, Thomas (Oakdale, CA)

1994-01-01T23:59:59.000Z

312

Optics and Diagnostics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

test optic after receiving chemical process called AMP2.5, which is under development for increasing the damage threshold of 3 fused silica optics. Photo Number: 2013-05031...

313

NIF Final Optics Assemblies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NIF Final Optics Assemblies The Final Optics Assemblies (FOAs) are the last element of the main laser system and the first of the target area systems. Each FOA contains four...

314

Optic Orientation in Stereo  

Science Journals Connector (OSTI)

The visualization and representation of optic orientation is the nittygritty of practical optical mineralogy. A complete description is concisely made with the use of a stereographic projection. Perspective dr...

Richard E. Stoiber; Stearns A. Morse

1994-01-01T23:59:59.000Z

315

Colored optical glass  

Science Journals Connector (OSTI)

The Lytkarino Optical Glass Factory manufactures various types of colored optical glasses: yellow, orange, and red glasses and glasses that are transparent in the IR region, as well as...

Mogilnaya, L G; Zinoveva, O B; Firsova, Yu A; Gulyukin, M N

2013-01-01T23:59:59.000Z

316

''Atomic Optics'': Nonimaging Optics on the Nanoscale  

SciTech Connect (OSTI)

This is the final report for a one year close out extension of our basic research program that was established at the University of Chicago more than sixteen years ago to explore and develop the optical sub-discipline that has come to be known as ''nonimaging optics''. This program has been extremely fruitful, having both broadened the range of formalism available for workers in this field and led to the discovery of many new families of optical devices. These devices and techniques have applications wherever the efficient transport and transformation of light distributions are important, in particular in illumination, fiber optics, collection and concentration of sunlight, and the detection of faint light signals in physics and astrophysics. Over the past thirty years, Nonimaging Optics (Welford and Winston, 1989) has brought a fresh approach to the analysis of many problems in classical macro-scale optics. Through the application of phase-space concepts, statistical methods, thermodynamic arguments, etc., many previously established performance limits were able to be broken and many technical surprises with exciting practical applications were discovered. The most recent three-year phase of our long-term continuing program ended in late 2002 and emphasized extending our work in geometrical optics and expanding it to include some interesting questions in physical optics as well as in the new field of statistical optics. This report presents a survey of the basic history and concepts of nonimaging optics and reviews highlights and significant accomplishments over the past fifteen years. This is followed by a more detailed summary of recent research directions and accomplishments during the last three years. This most recent phase was marked by the broadening in scope to include a separate project involving a collaboration with an industrial partner, Science Applications International Corporation (SAIC). This effort was proposed and approved in 1998 and was incorporated into this project (September, 1998) with the required additional funding provided through this already existing grant.

Roland Winston Joseph O'Gallagher

2005-01-15T23:59:59.000Z

317

Optics and Diagnostics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

10 14 | Next | Last Back to Index Optics Diffraction Gratings for APPOLON laser. Photo Number: 2011-020040...

318

Optical voltage reference  

DOE Patents [OSTI]

An optical voltage reference for providing an alternative to a battery source is described. The optical reference apparatus provides a temperature stable, high precision, isolated voltage reference through the use of optical isolation techniques to eliminate current and impedance coupling errors. Pulse rate frequency modulation is employed to eliminate errors in the optical transmission link while phase-lock feedback is employed to stabilize the frequency to voltage transfer function. 2 figures.

Rankin, R.; Kotter, D.

1994-04-26T23:59:59.000Z

319

Thermodynamics of Optical Tweezers  

Science Journals Connector (OSTI)

We discuss the measurement of the gradient and scattering forces based on a thermodynamic treatment of optical tweezers.

Stilgoe, Alexander B; Nguyen, Lan T P; Nieminen, Timo A; Rubinsztein-Dunlop, Halina

320

U-067:WebSVN Input Validation Flaw in getLog() Permits Cross-Site Scripting  

Broader source: Energy.gov (indexed) [DOE]

7:WebSVN Input Validation Flaw in getLog() Permits Cross-Site 7:WebSVN Input Validation Flaw in getLog() Permits Cross-Site Scripting Attacks U-067:WebSVN Input Validation Flaw in getLog() Permits Cross-Site Scripting Attacks December 22, 2011 - 8:15am Addthis PROBLEM: WebSVN Input Validation Flaw in getLog() Permits Cross-Site Scripting Attacks PLATFORM: WebSVN 2.3.0 and prior versions ABSTRACT: A remote user can access the target user's cookies (including authentication cookies), if any, associated with the site running the WebSVN software, access data recently submitted by the target user via web form to the site, or take actions on the site acting as the target user. reference LINKS: SecurityTracker Alert ID: 1026438 WebSVN version update WebSVN News IMPACT ASSESSMENT: Medium Discussion: The getLog() function does not properly filter HTML code from user-supplied

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Coal log pipeline research at the University of Missouri. 4th Quarterly report for 1994, October 1, 1994--December 31, 1994  

SciTech Connect (OSTI)

Several factors involved in coal log fabrication, storage and handling, such as curing time, aspect ratio and particle size distribution, were evaluated during the fourth quarter of 1994. When Orimulsion is used for coal log fabrication, a certain period of time is required to build up the strength of coal log. From the test results obtained, the longer the curing period the greater the wear resistance of the coal log. From previous studies, the coal log length to diameter ratio (aspect) was found to be an important factor affecting coal log performance during the pipeline degradation test. From the 2 inches pipeline degradation test results, coal logs with aspect ratios ranging from 1.6 to 2.2 traveled in a more stable manner, and had lower weight loss than coal logs with aspect ratios less than 1.6. The influence of particle size on the performance of a coal log was evaluated to determine the optimum particle size for coal log fabrication, based on practical and economical considerations.

Liu, H.; Wilson, J.W.

1995-06-01T23:59:59.000Z

322

Optical Diagnostics Thomas Tsang  

E-Print Network [OSTI]

Optical Diagnostics Thomas Tsang · tight environment · high radiation area · non-serviceable area · passive components · optics only, no active electronics · transmit image through flexible fiber bundle #12;New imaging fiber bundle Core size: 12 µm, diameter: 1/8" Optical Diagnostics Total fiber counts ~50

McDonald, Kirk

323

REVIEW ARTICLE Optical trapping  

E-Print Network [OSTI]

REVIEW ARTICLE Optical trapping Keir C. Neuman and Steven M. Blocka) Department of Biological ago, optical traps have emerged as a powerful tool with broad-reaching applications in biology--and the measurement of nanometer-level displacements of--optically trapped objects. We review progress

Block, Steven

324

University of Central Florida College of Optics & Photonics Optics  

E-Print Network [OSTI]

University of Central Florida College of Optics & Photonics Optics Spring 2010 OSE-6432: Principles of guided wave optics; electro -optics, acousto-optics and optoelectronics. Location: CREOL-A-214 or by Appointment Reference Materials: 1. Class Notes. 2. "Fundamentals of Optical Waveguides", K. Okamoto, Academic

Van Stryland, Eric

325

Resistivity Log At Fort Bliss Area (Combs, Et Al., 1999) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Log At Fort Bliss Area (Combs, Et Al., 1999) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Fort Bliss Area (Combs, Et Al., 1999) Exploration Activity Details Location Fort Bliss Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness not indicated DOE-funding Unknown Notes Three principal types of data were obtained from this drilling project: core samples of the lithology penetrated by the holes, records of drilling behavior (such as water level in the hole, changes in rate of penetration

326

Resistivity Log At Valles Caldera - Sulphur Springs Area (Wilt & Haar,  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Resistivity Log At Valles Caldera - Sulphur Springs Area (Wilt & Haar, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Valles Caldera - Sulphur Springs Area (Wilt & Haar, 1986) Exploration Activity Details Location Valles Caldera - Sulphur Springs Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date Usefulness useful DOE-funding Unknown Notes The generalized resistivity tog (Fig. 8) indicates a multilayer section with considerable resistivity contrast between the layers. The near-surface

327

A case study of multipole acoustic logging in heavy oil sand reservoirs  

Science Journals Connector (OSTI)

The multipole acoustic logging tool (MPAL) was tested in the heavy oil sand reservoirs of Canada. Compared with near shales the P-wave slowness of heavy oil sands does not change obviously with the value of about 125?s/ft; the dipole shear slowness decreases significantly to 275?s/ft. The heavy oil sands have a Vp/Vs value of less than 2.4. The slowness and amplitude of dipole shear wave are good lithology discriminators that have great differences between heavy oil sands and shales. The heavy oil sand reservoirs are anisotropic. The crossover phenomenon in the fast and slow dipole shear wave dispersion curves indicates that the anisotropy is induced by unbalanced horizontal stress in the region.

Xiaohua Che

2014-01-01T23:59:59.000Z

328

A new effective Monte Carlo Midway coupling method in MCNP applied to a well logging problem  

Science Journals Connector (OSTI)

The background of the Midway forwardadjoint coupling method including the black absorber technique for efficient Monte Carlo determination of radiation detector responses is described. The method is implemented in the general purpose MCNP Monte Carlo code. The utilization of the method is fairly straightforward and does not require any substantial extra expertise. The method was applied to a standard neutron well logging porosity tool problem. The results exhibit reliability and high efficiency of the Midway method. For the studied problem the efficiency gain is considerably higher than for a normal forward calculation, which is already strongly optimized by weight-windows. No additional effort is required to adjust the Midway model if the position of the detector or the porosity of the formation is changed. Additionally, the Midway method can be used with other variance reduction techniques if extra gain in efficiency is desired.

I.V. Serov; T.M. John; J.E. Hoogenboom

1998-01-01T23:59:59.000Z

329

Processing dipole acoustic logging data to image fracture network in shale gas reservoirs  

Science Journals Connector (OSTI)

A recent advance in borehole remote acoustic reflection imaging is the utilization of a dipole acoustic system in a borehole to emit and receive elastic waves to and from a remote geologic reflector in formation. An important application of this new technique is the delineation of fracture network in shale gas reservoirs as interest and activities in shale gas exploration increase in China. We develop a data processing procedure and implement it to handle routine processing of dipole acoustic logging data. The procedure takes into account the characteristics of the dipole data such as frequency dispersion attenuation recording length and dipole source orientation etc. to obtain an image of reflectors within 20~30 meters around the borehole. We have applied the technique to process dipole acoustic data from several wells drilled into gas reservoirs in China. The obtained images clearly identify major fracture network in the gas producing intervals of the reservoir demonstrating the effectiveness of the imaging technique.

Zhuang Chunxi; Su Yuanda; Tang Xiaoming

2012-01-01T23:59:59.000Z

330

Log-normal distribution based EMOS models for probabilistic wind speed forecasting  

E-Print Network [OSTI]

Ensembles of forecasts are obtained from multiple runs of numerical weather forecasting models with different initial conditions and typically employed to account for forecast uncertainties. However, biases and dispersion errors often occur in forecast ensembles, they are usually under-dispersive and uncalibrated and require statistical post-processing. We present an Ensemble Model Output Statistics (EMOS) method for calibration of wind speed forecasts based on the log-normal (LN) distribution, and we also show a regime-switching extension of the model which combines the previously studied truncated normal (TN) distribution with the LN. Both presented models are applied to wind speed forecasts of the eight-member University of Washington mesoscale ensemble, of the fifty-member ECMWF ensemble and of the eleven-member ALADIN-HUNEPS ensemble of the Hungarian Meteorological Service, and their predictive performances are compared to those of the TN and general extreme value (GEV) distribution based EMOS methods an...

Baran, Sndor

2014-01-01T23:59:59.000Z

331

Electric Micro Imager Log At Coso Geothermal Area (2003) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Electric Micro Imager Log At Coso Geothermal Area (2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Single-Well and Cross-Well Resistivity At Coso Geothermal Area (2003) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Single-Well and Cross-Well Resistivity Activity Date 2003 Usefulness not indicated DOE-funding Unknown Exploration Basis Fracture/stress analysis Notes A preliminary fracture/stress analysis was conducted for the recently drilled well 38C-9 as part of a continuing effort to characterize the

332

Near perfect optics  

SciTech Connect (OSTI)

This report discusses a novel fabrication process to produce nearly perfect optics. The process utilizes vacuum deposition techniques to optimally modify polished optical substrate surfaces. The surface figure, i.e. contour of a polished optical element, is improved by differentially filling in the low spots on the surface using flux from a physical vapor deposition source through an appropriate mask. The process is expected to enable the manufacture of diffraction-limited optical systems for the UV, extreme UV, and soft X-ray spectral regions, which would have great impact on photolithography and astronomy. This same technique may also reduce the fabrication cost of visible region optics with aspheric surfaces.

Goeke, R.; Farnsworth, A.V.; Neumann, C.C.; Sweatt, W.C.; Warren, M.E.; Weed, J.W.

1996-06-01T23:59:59.000Z

333

Modular Optical PDV System  

SciTech Connect (OSTI)

A modular optical photon Doppler velocimetry (PDV) detector system has been developed by using readily available optical components with a 20-GHz Miteq optical detector into eight channels of single-wide modules integrated into a 3U rack unit (1U = 1.75 inches) with a common power supply. Optical fibers were precisely trimmed, welded, and timed within each unit. This system has been used to collect dynamic velocity data on various physics experiments. An optical power meter displays the laser input power to the module and optical power at the detector. An adjustable micro-electromechanical system (MEMS) optical attenuator is used to adjust the amount of unshifted light entering the detector. Front panel LEDs show the presence of power to the module. A fully loaded chassis with eight channels consumes 45 watts of power. Each chassis requires 1U spacing above and below for heat management. Modules can be easily replaced.

Araceli Rutkowski, David Esquibel

2008-12-11T23:59:59.000Z

334

Fiber optic vibration sensor  

DOE Patents [OSTI]

A fiber optic vibration sensor utilizes two single mode optical fibers supported by a housing with one optical fiber fixedly secured to the housing and providing a reference signal and the other optical fiber having a free span length subject to vibrational displacement thereof with respect to the housing and the first optical fiber for providing a signal indicative of a measurement of any perturbation of the sensor. Damping or tailoring of the sensor to be responsive to selected levels of perturbation is provided by altering the diameter of optical fibers or by immersing at least a portion of the free span length of the vibration sensing optical fiber into a liquid of a selected viscosity.

Dooley, Joseph B. (Harriman, TN); Muhs, Jeffrey D. (Lenoir City, TN); Tobin, Kenneth W. (Harriman, TN)

1995-01-01T23:59:59.000Z

335

Fiber optic vibration sensor  

DOE Patents [OSTI]

A fiber optic vibration sensor utilizes two single mode optical fibers supported by a housing with one optical fiber fixedly secured to the housing and providing a reference signal and the other optical fiber having a free span length subject to vibrational displacement thereof with respect to the housing and the first optical fiber for providing a signal indicative of a measurement of any perturbation of the sensor. Damping or tailoring of the sensor to be responsive to selected levels of perturbation is provided by altering the diameter of optical fibers or by immersing at least a portion of the free span length of the vibration sensing optical fiber into a liquid of a selected viscosity. 2 figures.

Dooley, J.B.; Muhs, J.D.; Tobin, K.W.

1995-01-10T23:59:59.000Z

336

Long-term overstory and understory change following logging and fire exclusion in a Sierra Nevada mixed-conifer forest  

Science Journals Connector (OSTI)

Abstract In many forests of the western US, increased potential for fires of uncharacteristic intensity and severity is frequently attributed to structural changes brought about by fire exclusion, past land management practices, and climate. Extent of forest change and effect on understory vegetation over time are not well understood, but such information is useful to forest management focused on restoring biodiversity and resilience to these ecosystems. We re-measured three large (4ha) historical Methods of Cutting (MC) plots in mixed-conifer forest of the central Sierra Nevada installed in 1929 to evaluate the effects of different logging methods. Trees ?10cm were surveyed across the entire plots and understory vegetation (tree seedlings, shrubs, and herbaceous species) was quantified within quadrats in the old-growth condition in 1929 prior to logging, later in 1929 after logging, and again in 2007 or 2008. We also compared forest structure in the MC plots with an adjacent unlogged control area and collected fire scar samples from nearby stumps to evaluate the historical fire regime. The contemporary tree density in the MC plots (739treesha?1) was 2.4times greater than the 1929 pre-logging density (314treesha?1). Trees in the small and intermediate size classes (1075cmdbh) were significantly over-represented, and trees in the larger size classes (>90cmdbh) generally significantly under-represented, compared with historical conditions. The proportion of pine dropped from 37% of tree basal area in 1929 to 21% in 2007/08. Density of small to intermediate sized trees was similar in the contemporary logged and unlogged control plots, suggesting that over the long term, ingrowth may have been influenced more by lack of fire than historical logging. Change to non-tree vegetation was most pronounced for shrub cover, which averaged 28.6% in 1929 but only 2.5% in 2008. CART analysis indicated that the highest shrub cover in 1929 was in areas having four or fewer trees growing within 15m to the south of the quadrat, suggesting that reduced light was the most likely explanation for the decline over time. Herbaceous species richness in 2008 was significantly lower than in 1931, two years after logging, but did not differ significantly from 1929, prior to logging. Understory vegetation should benefit from thinning or prescribed fire treatments that lead to a greater abundance of higher light environments within stands.

Eric E. Knapp; Carl N. Skinner; Malcolm P. North; Becky L. Estes

2013-01-01T23:59:59.000Z

337

A Brief Review of the Basis for, and the Procedures Currently Utilized in, Gross Gamma-Ray Log Calibration (October 1976)  

Broader source: Energy.gov [DOE]

A Brief Review of the Basis for, and the Procedures Currently Utilized in, Gross Gamma-Ray Log Calibration (October 1976)

338

THE STRUCTURE OF THE X-RAY AND OPTICAL EMITTING REGIONS OF THE LENSED QUASAR Q 2237+0305  

SciTech Connect (OSTI)

We use gravitational microlensing to determine the size of the X-ray and optical emission regions of the quadruple lens system Q 2237+0305. The optical half-light radius, log(R{sub 1/2,V}/cm) = 16.41 {+-} 0.18 (at {lambda}{sub rest} = 2018 A), is significantly larger than the observed soft, log(R{sub 1/2,soft}/cm)=15.76{sup +0.41}{sub -0.34} (1.1-3.5 keV in the rest frame), and hard, log(R{sub 1/2,hard}/cm)=15.46{sup +0.34}{sub -0.29} (3.5-21.5 keV in the rest frame), band X-ray emission. There is weak evidence that the hard component is more compact than the soft, with log(R{sub 1/2,soft}/R{sub 1/2,hard}){approx_equal}0.30{sup +0.53}{sub -0.45}. This wavelength-dependent structure agrees with recent results found in other lens systems using microlensing techniques, and favors geometries in which the corona is concentrated near the inner edge of the accretion disk. While the available measurements are limited, the size of the X-ray emission region appears to be roughly proportional to the mass of the central black hole.

Mosquera, A. M.; Kochanek, C. S.; Blackburne, J. A. [Department of Astronomy, Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Chen, B.; Dai, X. [Homer L. Dodge Department of Physics and Astronomy, University of Oklahoma, Norman, OK 73019 (United States); Chartas, G. [Department of Physics and Astronomy, College of Charleston, Charleston, SC 29424 (United States)

2013-05-20T23:59:59.000Z

339

Transpiration purged optical probe  

DOE Patents [OSTI]

An optical apparatus for clearly viewing the interior of a containment vessel by applying a transpiration fluid to a volume directly in front of the external surface of the optical element of the optical apparatus. The fluid is provided by an external source and transported by means of an annular tube to a capped end region where the inner tube is perforated. The perforation allows the fluid to stream axially towards the center of the inner tube and then axially away from an optical element which is positioned in the inner tube just prior to the porous sleeve. This arrangement draws any contaminants away from the optical element keeping it free of contaminants. In one of several embodiments, the optical element can be a lens, a viewing port or a laser, and the external source can provide a transpiration fluid having either steady properties or time varying properties.

2004-01-06T23:59:59.000Z

340

Quantum optical waveform conversion  

E-Print Network [OSTI]

Currently proposed architectures for long-distance quantum communication rely on networks of quantum processors connected by optical communications channels [1,2]. The key resource for such networks is the entanglement of matter-based quantum systems with quantum optical fields for information transmission. The optical interaction bandwidth of these material systems is a tiny fraction of that available for optical communication, and the temporal shape of the quantum optical output pulse is often poorly suited for long-distance transmission. Here we demonstrate that nonlinear mixing of a quantum light pulse with a spectrally tailored classical field can compress the quantum pulse by more than a factor of 100 and flexibly reshape its temporal waveform, while preserving all quantum properties, including entanglement. Waveform conversion can be used with heralded arrays of quantum light emitters to enable quantum communication at the full data rate of optical telecommunications.

D Kielpinski; JF Corney; HM Wiseman

2010-10-11T23:59:59.000Z

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Annual Logging Symposium, June 21-24, 2009 Wireline and While-Drilling Formation-Tester Sampling with Oval, Focused,  

E-Print Network [OSTI]

SPWLA 50th Annual Logging Symposium, June 21-24, 2009 1 Wireline and While-Drilling Formation-Tester Sampling with Oval, Focused, and Conventional Probe Types in the Presence of Water- and Oil-Base Mud existed since the introduction of formation pressure testing to the drilling environment in 2002

Torres-Verdín, Carlos

342

Using Landsat imagery to map forest change in southwest China in response to the national logging ban and ecotourism development  

E-Print Network [OSTI]

ban and ecotourism development Jodi S. Brandt a, , Tobias Kuemmerle b,c , Haomin Li d , Guopeng Ren e government has legislated strong forest protection and fostered the growth of ecotourism-based economic periods of forestry policy and ecotourism development from 1974 to 2009. Our analysis showed that logging

Radeloff, Volker C.

343

Neural network modelling and classification of lithofacies using well log data: A case study from KTB borehole site  

Science Journals Connector (OSTI)

......study from KTB borehole site Saumen Maiti...Continental Deep Drilling Project (KTB...from the KTB borehole log data and...and require a large amount of data...Continental Deep Drilling Project (KTB...the problems of borehole geophysics...to interpret large amount of borehole......

Saumen Maiti; Ram Krishna Tiwari; Hans-Joachim Kmpel

2007-05-01T23:59:59.000Z

344

Upper-crustal seismic velocity heterogeneity as derived from a variety of P-wave sonic logs  

Science Journals Connector (OSTI)

......removing a large-scale...probed rocks. borehole geophysics...Continental Deep Drilling Program...range from borehole logs, Geophys...continental deep-drilling (KTB) holes...removing a large-scale...representative of larger volumes of...vicinity of the borehole wall. Hornby...introduced during drilling. Although......

K. Holliger

1996-06-01T23:59:59.000Z

345

Numerical simulation of borehole acoustic logging in the frequency and time domains with hp-adaptive finite elements  

E-Print Network [OSTI]

Numerical simulation of borehole acoustic logging in the frequency and time domains with hp elasticity Coupled problems hp-adaptive finite elements a b s t r a c t Accurate numerical simulation physical modeling combined with accurate and efficient numerical dis- cretization and solution techniques

Torres-Verdín, Carlos

346

Optical atomic magnetometer  

DOE Patents [OSTI]

An optical atomic magnetometers is provided operating on the principles of nonlinear magneto-optical rotation. An atomic vapor is optically pumped using linearly polarized modulated light. The vapor is then probed using a non-modulated linearly polarized light beam. The resulting modulation in polarization angle of the probe light is detected and used in a feedback loop to induce self-oscillation at the resonant frequency.

Budker, Dmitry; Higbie, James; Corsini, Eric P

2013-11-19T23:59:59.000Z

347

Optics in Brazil  

Science Journals Connector (OSTI)

For Brazilian scientists, optics is considered a leading field in technology transfer. The discipline plays a large role in the country?s ongoing scientific ...

Bagnato, Vanderlei; Brito Cruz, Carlos H de

2006-01-01T23:59:59.000Z

348

LSST Camera Optics Design  

SciTech Connect (OSTI)

The Large Synoptic Survey Telescope (LSST) uses a novel, three-mirror, telescope design feeding a camera system that includes a set of broad-band filters and three refractive corrector lenses to produce a flat field at the focal plane with a wide field of view. Optical design of the camera lenses and filters is integrated in with the optical design of telescope mirrors to optimize performance. We discuss the rationale for the LSST camera optics design, describe the methodology for fabricating, coating, mounting and testing the lenses and filters, and present the results of detailed analyses demonstrating that the camera optics will meet their performance goals.

Riot, V J; Olivier, S; Bauman, B; Pratuch, S; Seppala, L; Gilmore, D; Ku, J; Nordby, M; Foss, M; Antilogus, P; Morgado, N

2012-05-24T23:59:59.000Z

349

Optically measuring interior cavities  

DOE Patents [OSTI]

A method of measuring the three-dimensional volume or perimeter shape of an interior cavity includes the steps of collecting a first optical slice of data that represents a partial volume or perimeter shape of the interior cavity, collecting additional optical slices of data that represents a partial volume or perimeter shape of the interior cavity, and combining the first optical slice of data and the additional optical slices of data to calculate of the three-dimensional volume or perimeter shape of the interior cavity.

Stone, Gary Franklin (Livermore, CA)

2008-12-21T23:59:59.000Z

350

Optical limiting materials  

DOE Patents [OSTI]

Optical limiting materials. Methanofullerenes, fulleroids and/or other fullerenes chemically altered for enhanced solubility, in liquid solution, and in solid blends with transparent glass (SiO.sub.2) gels or polymers, or semiconducting (conjugated) polymers, are shown to be useful as optical limiters (optical surge protectors). The nonlinear absorption is tunable such that the energy transmitted through such blends saturates at high input energy per pulse over a wide range of wavelengths from 400-1100 nm by selecting the host material for its absorption wavelength and ability to transfer the absorbed energy into the optical limiting composition dissolved therein. This phenomenon should be generalizable to other compositions than substituted fullerenes.

McBranch, Duncan W. (Santa Fe, NM); Mattes, Benjamin R. (Santa Fe, NM); Koskelo, Aaron C. (Los Alamos, NM); Heeger, Alan J. (Santa Barbara, CA); Robinson, Jeanne M. (Los Alamos, NM); Smilowitz, Laura B. (Los Alamos, NM); Klimov, Victor I. (Los Alamos, NM); Cha, Myoungsik (Goleta, CA); Sariciftci, N. Serdar (Santa Barbara, CA); Hummelen, Jan C. (Groningen, NL)

1998-01-01T23:59:59.000Z

351

Nanotechnology for Optical Networks  

Science Journals Connector (OSTI)

Transparent optical networks will rely on electronics for control and monitoring. Integrating infrared optoelectronic devices such as lasers, modulators, and detectors onto silicon...

Sargent, Edward

352

Transverse Optical Magnetism  

Science Journals Connector (OSTI)

Magnetic interactions with light are usually so small that they are ignored, even in nonlinear optics. Scientists have discovered that parametric processes can drive the interactions...

Rand, Stephen

2010-01-01T23:59:59.000Z

353

Optical contact micrometer  

SciTech Connect (OSTI)

Certain examples provide optical contact micrometers and methods of use. An example optical contact micrometer includes a pair of opposable lenses to receive an object and immobilize the object in a position. The example optical contact micrometer includes a pair of opposable mirrors positioned with respect to the pair of lenses to facilitate viewing of the object through the lenses. The example optical contact micrometer includes a microscope to facilitate viewing of the object through the lenses via the mirrors; and an interferometer to obtain one or more measurements of the object.

Jacobson, Steven D.

2014-08-19T23:59:59.000Z

354

Characterization of gas hydrate reservoirs by integration of core and log data in the Ulleung Basin, East Sea  

Science Journals Connector (OSTI)

Abstract Examinations of core and well-log data from the Second Ulleung Basin Gas Hydrate Drilling Expedition (UBGH2) drill sites suggest that Sites UBGH2-2_2 and UBGH2-6 have relatively good gas hydrate reservoir quality in terms of individual and total cumulative thicknesses of gas-hydrate-bearing sand (HYBS) beds. In both of the sites, core sediments are generally dominated by hemipelagic muds which are intercalated with turbidite sands. The turbidite sands are usually thin-to-medium bedded and mainly consist of well sorted coarse silt to fine sand. Anomalies in infrared core temperatures and porewater chlorinity data and pressure core measurements indicate that gas hydrate occurrence zones (GHOZ) are present about 68155mbsf at Site UBGH2-2_2 and 110155mbsf at Site UBGH2-6. In both the GHOZ, gas hydrates are preferentially associated with many of the turbidite sands as pore-filling type hydrates. The HYBS identified in the cores from Site UBGH2-6 are medium-to-thick bedded particularly in the lower part of the GHOZ and well coincident with significant high excursions in all of the resistivity, density, and velocity logs. Gas-hydrate saturations in the HYBS range from 12% to 79% with an average of 52% based on pore-water chlorinity. In contrast, the HYBS from Site UBGH2-2_2 are usually thin-bedded and show poor correlations with both of the resistivity and velocity logs owing to volume averaging effects of the logging tools on the thin HYBS beds. Gas-hydrate saturations in the HYBS range from 15% to 65% with an average of 37% based on pore-water chlorinity. In both of the sites, large fluctuations in biogenic opal contents have significant effects on the sediment physical properties, resulting in limited usage of gamma ray and density logs in discriminating sand reservoirs.

J.-J. Bahk; G.-Y. Kim; J.-H. Chun; J.-H. Kim; J.Y. Lee; B.-J. Ryu; J.-H. Lee; B.-K. Son; T.S. Collett

2013-01-01T23:59:59.000Z

355

AN INTRODUCTION TO QUANTUM OPTICS...  

E-Print Network [OSTI]

AN INTRODUCTION TO QUANTUM OPTICS... ...the light as you've never seen before... Optics:http://science.howstuffworks.com/laser5.htm #12;5 DEFINITION Quantum Optics: "Quantum optics is a field in quantum physics, dealing OPTICS OPERATORS Light is described in terms of field operators for creation and annihilation of photons

Palffy-Muhoray, Peter

356

NETL: News Release - DOE's Oil and Gas Produced-Water Program Logs Key  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

July 20, 2007 July 20, 2007 DOE's Oil and Gas Produced-Water Program Logs Key Milestones Cost-Effectively Treating Coproduced Water Boosts U.S. Energy, Water Supplies MORGANTOWN, WV - A research program funded by the U.S. Department of Energy (DOE) is making significant progress in developing new ways to treat and use water coproduced with oil and natural gas. The ultimate benefit is a two-for-one solution that expects to boost domestic energy supplies while enhancing the Nation's water supply. Coproduced water-some of which occurs naturally in subsurface formations, and some that is recovered following injection of water into an oil or gas reservoir to boost production-accounts for 98 percent of all waste generated by U.S. oil and natural gas operations. Produced-water volumes average nine barrels for each barrel of oil produced. Handling, treating, and safely disposing of this produced water has been a tough, costly challenge for oil and natural gas producers for decades. Much of the produced water has high concentrations of minerals or salts that make it unsuitable for beneficial use or surface discharge. An oilfield operator often must reinject such produced water into deep formations, sometimes resorting to costly trucking of the water to deep-injection well sites specially designated by the U.S. Environmental Protection Agency.

357

Parameter estimation from flowing fluid temperature logging data in unsaturated fractured rock using multiphase inverse modeling  

SciTech Connect (OSTI)

A simple conceptual model has been recently developed for analyzing pressure and temperature data from flowing fluid temperature logging (FFTL) in unsaturated fractured rock. Using this conceptual model, we developed an analytical solution for FFTL pressure response, and a semianalytical solution for FFTL temperature response. We also proposed a method for estimating fracture permeability from FFTL temperature data. The conceptual model was based on some simplifying assumptions, particularly that a single-phase airflow model was used. In this paper, we develop a more comprehensive numerical model of multiphase flow and heat transfer associated with FFTL. Using this numerical model, we perform a number of forward simulations to determine the parameters that have the strongest influence on the pressure and temperature response from FFTL. We then use the iTOUGH2 optimization code to estimate these most sensitive parameters through inverse modeling and to quantify the uncertainties associated with these estimated parameters. We conclude that FFTL can be utilized to determine permeability, porosity, and thermal conductivity of the fracture rock. Two other parameters, which are not properties of the fractured rock, have strong influence on FFTL response. These are pressure and temperature in the borehole that were at equilibrium with the fractured rock formation at the beginning of FFTL. We illustrate how these parameters can also be estimated from FFTL data.

Mukhopadhyay, S.; Tsang, Y.; Finsterle, S.

2009-01-15T23:59:59.000Z

358

Future of Optical Astronomy  

Science Journals Connector (OSTI)

... I BELIEVE that optical astronomy in Great Britain has now reached, for virtually the first time in its history, ... studied in universities and in Government and industrial laboratories; but with two exceptions, optical astronomy is studied almost entirely in university laboratories only, and its future largely depends on ...

D. E. BLACKWELL

1962-09-01T23:59:59.000Z

359

Optical fuel pin scanner  

DOE Patents [OSTI]

An optical scanner for indicia arranged in a focal plane at a cylindrical outside surface by use of an optical system including a rotatable dove prism. The dove prism transmits a rotating image of an encircled cylindrical surface area to a stationary photodiode array.

Kirchner, Tommy L. (Richland, WA); Powers, Hurshal G. (Richland, WA)

1983-01-01T23:59:59.000Z

360

Optical scanning apparatus  

DOE Patents [OSTI]

An optical scanner employed in a radioactive environment for reading indicia imprinted about a cylindrical surface of an article by means of an optical system including metallic reflective and mirror surfaces resistant to degradation and discoloration otherwise imparted to glass surfaces exposed to radiation is described.

Villarreal, R.A.

1985-11-06T23:59:59.000Z

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Vibration insensitive optical cavity  

Science Journals Connector (OSTI)

An optical cavity is designed and implemented that is insensitive to vibration in all directions. The cavity is mounted with its optical axis in the horizontal plane. A minimum response of 0.1 (3.7)kHz?ms?2 is achieved for low-frequency vertical (horizontal) vibrations.

S. A. Webster; M. Oxborrow; P. Gill

2007-01-09T23:59:59.000Z

362

Multimode optical fiber  

DOE Patents [OSTI]

A depressed graded-index multimode optical fiber includes a central core, an inner depressed cladding, a depressed trench, an outer depressed cladding, and an outer cladding. The central core has an alpha-index profile. The depressed claddings limit the impact of leaky modes on optical-fiber performance characteristics (e.g., bandwidth, core size, and/or numerical aperture).

Bigot-Astruc, Marianne; Molin, Denis; Sillard, Pierre

2014-11-04T23:59:59.000Z

363

Fiber optic hydrophone  

DOE Patents [OSTI]

A miniature fiber optic hydrophone based on the principles of a Fabry-Perot interferometer. The hydrophone, in one embodiment, includes a body having a shaped flexible bladder at one end which defines a volume containing air or suitable gas, and including a membrane disposed adjacent a vent. An optic fiber extends into the body with one end terminating in spaced relation to the membrane. Acoustic waves in the water that impinge on the bladder cause the pressure of the volume therein to vary causing the membrane to deflect and modulate the reflectivity of the Fabry-Perot cavity formed by the membrane surface and the cleaved end of the optical fiber disposed adjacent to the membrane. When the light is transmitted down the optical fiber, the reflected signal is amplitude modulated by the incident acoustic wave. Another embodiment utilizes a fluid filled volume within which the fiber optic extends.

Kuzmenko, Paul J. (Livermore, CA); Davis, Donald T. (Livermore, CA)

1994-01-01T23:59:59.000Z

364

Digital optical conversion module  

DOE Patents [OSTI]

A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer.

Kotter, Dale K. (North Shelley, ID); Rankin, Richard A. (Ammon, ID)

1991-02-26T23:59:59.000Z

365

Digital optical conversion module  

DOE Patents [OSTI]

A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer. 2 figs.

Kotter, D.K.; Rankin, R.A.

1988-07-19T23:59:59.000Z

366

Fiber optic hydrophone  

DOE Patents [OSTI]

A miniature fiber optic hydrophone based on the principles of a Fabry-Perot interferometer is disclosed. The hydrophone, in one embodiment, includes a body having a shaped flexible bladder at one end which defines a volume containing air or suitable gas, and including a membrane disposed adjacent a vent. An optical fiber extends into the body with one end terminating in spaced relation to the membrane. Acoustic waves in the water that impinge on the bladder cause the pressure of the volume therein to vary causing the membrane to deflect and modulate the reflectivity of the Fabry-Perot cavity formed by the membrane surface and the cleaved end of the optical fiber disposed adjacent to the membrane. When the light is transmitted down the optical fiber, the reflected signal is amplitude modulated by the incident acoustic wave. Another embodiment utilizes a fluid filled volume within which the fiber optic extends. 2 figures.

Kuzmenko, P.J.; Davis, D.T.

1994-05-10T23:59:59.000Z

367

Optically Interconnected MulticomputersUsing  

E-Print Network [OSTI]

Optically Interconnected MulticomputersUsing Inverted-GraphTopologies Tosuccessfullyexploitthebenefitsofopticaltechnologyinatightlycoupledmulticomputer, the architecturaldesignmust reflectboth the advantages and limitationsof optics. This article systems. Although optics have con- tributed dramatically to long-distance communi- cation and more

Krchnavek, Robert R.

368

Optical amplifier-powered quantum optical amplification  

E-Print Network [OSTI]

I show that an optical amplifier, when combined with photon subtraction, can be used for quantum state amplification, adding noise at a level below the standard minimum. The device could be used to significantly decrease the probability of incorrectly identifying coherent states chosen from a finite set.

John Jeffers

2011-05-16T23:59:59.000Z

369

Fast Inverse Nonlinear Fourier Transform For Generating Multi-Solitons In Optical Fiber  

E-Print Network [OSTI]

The achievable data rates of current fiber-optic wavelength-division-multiplexing (WDM) systems are limited by nonlinear interactions between different subchannels. Recently, it was thus proposed to replace the conventional Fourier transform in WDM systems with an appropriately defined nonlinear Fourier transform (NFT). The computational complexity of NFTs is a topic of current research. In this paper, a fast inverse NFT algorithm for the important special case of multi-solitonic signals is presented. The algorithm requires only $\\mathcal{O}(D\\log^{2}D)$ floating point operations to compute $D$ samples of a multi-soliton. To the best of our knowledge, this is the first algorithm for this problem with $\\log^{2}$-linear complexity. The paper also includes a many samples analysis of the generated nonlinear Fourier spectra.

Wahls, Sander

2015-01-01T23:59:59.000Z

370

Science, Optics and You: Shadows  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

http:micro.magnet.fsu.eduopticstutorialsindex.html INTRODUCTION SHADOWS MODULE m5 SCIENCE, OPTICS & YOU GUIDEBOOK - 96 - SCIENCE, OPTICS & YOU GUIDEBOOK - 97 - m5: Shadows...

371

Optical Modulation of Molecular Conductance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optical Modulation of Molecular Conductance Authors: Battacharyya, S., Kibel, A., Kodis, G., Liddell, P. A., Gervaldo, M., Gust, D., and Lindsay, S. Title: Optical Modulation of...

372

Gregorian optical system with non-linear optical technology for protection against intense optical transients  

DOE Patents [OSTI]

An optical system comprising a concave primary mirror reflects light through an intermediate focus to a secondary mirror. The secondary mirror re-focuses the image to a final image plane. Optical limiter material is placed near the intermediate focus to optically limit the intensity of light so that downstream components of the optical system are protected from intense optical transients. Additional lenses before and/or after the intermediate focus correct optical aberrations.

Ackermann, Mark R. (Albuquerque, NM); Diels, Jean-Claude M. (Albuquerque, NM)

2007-06-26T23:59:59.000Z

373

Silicon fiber optic sensors  

DOE Patents [OSTI]

A Fabry-Perot cavity is formed by a partially or wholly reflective surface on the free end of an integrated elongate channel or an integrated bounding wall of a chip of a wafer and a partially reflective surface on the end of the optical fiber. Such a constructed device can be utilized to detect one or more physical parameters, such as, for example, strain, through the optical fiber using an optical detection system to provide measuring accuracies of less than aboutb0.1%.

Pocha, Michael D. (Livermore, CA); Swierkowski, Steve P. (Livermore, CA); Wood, Billy E. (Livermore, CA)

2007-10-02T23:59:59.000Z

374

Optical Quadratic Measure Eigenmodes  

E-Print Network [OSTI]

We report a mathematically rigorous technique which facilitates the optimization of various optical properties of electromagnetic fields. The technique exploits the linearity of electromagnetic fields along with the quadratic nature of their interaction with matter. In this manner we may decompose the respective fields into optical quadratic measure eigenmodes (QME). Key applications include the optimization of the size of a focused spot, the transmission through photonic devices, and the structured illumination of photonic and plasmonic structures. We verify the validity of the QME approach through a particular experimental realization where the size of a focused optical field is minimized using a superposition of Bessel beams.

Michael Mazilu; Joerg Baumgartl; Sebastian Kosmeier; Kishan Dholakia

2010-07-13T23:59:59.000Z

375

Fiber optic laser rod  

DOE Patents [OSTI]

A laser rod is formed from a plurality of optical fibers, each forming an individual laser. Synchronization of the individual fiber lasers is obtained by evanescent wave coupling between adjacent optical fiber cores. The fiber cores are dye-doped and spaced at a distance appropriate for evanescent wave coupling at the wavelength of the selected dye. An interstitial material having an index of refraction lower than that of the fiber core provides the optical isolation for effective lasing action while maintaining the cores at the appropriate coupling distance. 2 figs.

Erickson, G.F.

1988-04-13T23:59:59.000Z

376

Tuned optical cavity magnetometer  

DOE Patents [OSTI]

An atomic magnetometer is disclosed which utilizes an optical cavity formed from a grating and a mirror, with a vapor cell containing an alkali metal vapor located inside the optical cavity. Lasers are used to magnetically polarize the alkali metal vapor and to probe the vapor and generate a diffracted laser beam which can be used to sense a magnetic field. Electrostatic actuators can be used in the magnetometer for positioning of the mirror, or for modulation thereof. Another optical cavity can also be formed from the mirror and a second grating for sensing, adjusting, or stabilizing the position of the mirror.

Okandan, Murat (Edgewood, NM); Schwindt, Peter (Albuquerque, NM)

2010-11-02T23:59:59.000Z

377

Interpretation of Pennsylvania Bartlesville sandstone in southeastern Kansas and northeastern Oklahoma from continuous dipmeter and gamma-ray logs  

E-Print Network [OSTI]

INTERPRETATION OF PENNSYLVANIAN BARTLESVILLE SANDSTONE IN SOUTHEASTERN KANSAS AND NORTHEASTERN OKLAHOMA FROM CONTINUOUS DIPMETER AND GAMMA-RAY LOGS A Thesis by DWIGHT STANLEY KRANZ Submitted to the Graduate College of Texas A&M University... in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE May 1981 Major Subject: Geology INTERPRETATION OF PENNSYLVANIAN SARTLESVILLE SANDSTONE IN SOUTHEASTERN KANSAS AND NORTHEASTERN OKLAHOMA FROM CONTINUOUS DIPMETER AND GAMMA...

Kranz, Dwight Stanley

2012-06-07T23:59:59.000Z

378

A simulation model for determining the productivity and costs associated with a mobile small-log sawmill  

E-Print Network [OSTI]

Committee) 7 ad of partment (Memb r) (Member) Member) December 1975 ABSTRACT A Simulation Model for Determining The Productivity and Costs Associated With a Mobile Small-Log Sawmill. (December 1975) Ken E. Rogers, B. S. F. , Stephen F. Austin... for their fine suggestions and critical comments. They are: Dr. Don F. Durso, Dr. Clifford Hickman, and Dr. August Smith. Lastly, I would like to express sincere appreciation to my wife, Kathy, for her continued patience, help, and encouragement through...

Rogers, Kenneth E

1975-01-01T23:59:59.000Z

379

Jessen/Deutsch, "Optical Lattices" 1 OPTICAL LATTICES  

E-Print Network [OSTI]

Jessen/Deutsch, "Optical Lattices" 1 OPTICAL LATTICES P. S. JESSEN Optical Sciences Center@rhea.opt-sci.arizona.edu I. H. DEUTSCH Center for Advanced Studies University of New Mexico Albuquerque, NM, 87131 Phone, 1996). #12;Jessen/Deutsch, "Optical Lattices" 2 CONTENTS I. Introduction

Jessen, Poul S.

380

Adaptive optics enhanced simultaneous en-face optical coherence tomography  

E-Print Network [OSTI]

Adaptive optics enhanced simultaneous en-face optical coherence tomography and scanning laser ophthalmoscopy David Merino and Chris Dainty Applied Optics Group, Department of Experimental Physics, National and Adrian Gh. Podoleanu Applied Optics Group, School of Physical Sciences, University of Kent at Canterbury

Dainty, Chris

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Statistical model for source rock maturity and organic richness using well-log data, Bakken Formation, Williston basin, United States  

SciTech Connect (OSTI)

A study of the Bakken Formation, the proposed source rock for much of the hydrocarbons generated in the Williston basin, was done using bulk density, neutron porosity, and resistivity logs, and formation temperatures. Principal components, cluster, and discriminant analyses indicate that the present-day distribution of organic matter controls much of the variability in the log values. Present-day total organic carbon values are high in the central part of the basin near northeastern Montana and along the east edge of the basin, and low in the area of the Nesson anticline and along the southwest edge of the basin. Using a regression of density on temperature and the analysis of residuals from this regression, hydrocarbon maturity effects were partially separated from depositional effects. These analyses suggest that original concentrations of organic matter were low near the limits of the Bakken and increased to a high in northeastern Montana. The pre-maturation distribution of total organic carbon and the present-day total organic carbon distribution, as determined by statistical analyses of well-log data, agree with the results of geochemical analyses. The distributions can be explained by a relatively simple depositional pattern and thermal history for the Bakken. 6 figures, 3 tables.

Krystinik, K.B.; Charpentier, R.R.

1987-01-01T23:59:59.000Z

382

Optical Landau damping  

SciTech Connect (OSTI)

We study the transfer of energy from an optical potential to atomic and molecular gases and demonstrate that this process is analogous to collisionless Landau damping of electrostatic potentials in plasmas and gravitational potentials observed on astrophysical scales. We show that a signficant fraction of the light attenuation within a cavity can be attributed to this mechanism when the cavity is filled with a gas at high density. The resulting motion of particles created by optical Landau damping can be used to induce transport when a periodic potential produced by two counterpropagating high-intensity pulsed optical fields is used. Bulk drift of the gas also appears feasible even when the mean kinetic energy is much greater that the maximum optical potential.

Shneider, M.N.; Barker, P.F. [Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, New Jersey 08544 (United States); Department of Physics, School of Engineering and Physical Sciences, Heriott-Watt University, Edinburgh EH14 4AS, Scotland (United Kingdom)

2005-05-15T23:59:59.000Z

383

Cryogenic optical refrigeration.  

E-Print Network [OSTI]

??This thesis compiles recent achievements in optical refrigeration, cooling a 5 wt. % ytterbium doped yttrium lithium fluoride (Yb+3:YLF) crystal through anti-Stokes fluorescence to a (more)

Melgaard, Seth

2011-01-01T23:59:59.000Z

384

Intracoronary Optical Diagnostics  

E-Print Network [OSTI]

Optical coherence tomography (OCT), is a novel intravascular imaging modality analogous to intravascular ultrasound but uses light instead of sound. This review details the background, development, and status of current ...

Lowe, Harry C.

385

Optical displacement sensor  

DOE Patents [OSTI]

An optical displacement sensor is disclosed which uses a vertical-cavity surface-emitting laser (VCSEL) coupled to an optical cavity formed by a moveable membrane and an output mirror of the VCSEL. This arrangement renders the lasing characteristics of the VCSEL sensitive to any movement of the membrane produced by sound, vibrations, pressure changes, acceleration, etc. Some embodiments of the optical displacement sensor can further include a light-reflective diffractive lens located on the membrane or adjacent to the VCSEL to control the amount of lasing light coupled back into the VCSEL. A photodetector detects a portion of the lasing light from the VCSEL to provide an electrical output signal for the optical displacement sensor which varies with the movement of the membrane.

Carr, Dustin W. (Albuquerque, NM)

2008-04-08T23:59:59.000Z

386

Optical Quantum Computing  

E-Print Network [OSTI]

In 2001 all-optical quantum computing became feasible with the discovery that scalable quantum computing is possible using only single photon sources, linear optical elements, and single photon detectors. Although it was in principle scalable, the massive resource overhead made the scheme practically daunting. However, several simplifications were followed by proof-of-principle demonstrations, and recent approaches based on cluster states or error encoding have dramatically reduced this worrying resource overhead, making an all-optical architecture a serious contender for the ultimate goal of a large-scale quantum computer. Key challenges will be the realization of high-efficiency sources of indistinguishable single photons, low-loss, scalable optical circuits, high efficiency single photon detectors, and low-loss interfacing of these components.

Jeremy L. O'Brien

2008-03-11T23:59:59.000Z

387

Stereoscopic optical viewing system  

DOE Patents [OSTI]

An improved optical system which provides the operator with a stereoscopic viewing field and depth of vision, particularly suitable for use in various machines such as electron or laser beam welding and drilling machines. The system features two separate but independently controlled optical viewing assemblies from the eyepiece to a spot directly above the working surface. Each optical assembly comprises a combination of eye pieces, turning prisms, telephoto lenses for providing magnification, achromatic imaging relay lenses and final stage pentagonal turning prisms. Adjustment for variations in distance from the turning prisms to the workpiece, necessitated by varying part sizes and configurations and by the operator's visual accuity, is provided separately for each optical assembly by means of separate manual controls at the operator console or within easy reach of the operator.

Tallman, C.S.

1986-05-02T23:59:59.000Z

388

Optical gamma thermometer  

DOE Patents [OSTI]

An optical gamma thermometer includes a metal mass having a temperature proportional to a gamma flux within a core of a nuclear reactor, and an optical fiber cable for measuring the temperature of the heated metal mass. The temperature of the heated mass may be measured by using one or more fiber grating structures and/or by using scattering techniques, such as Raman, Brillouin, and the like. The optical gamma thermometer may be used in conjunction with a conventional reactor heat balance to calibrate the local power range monitors over their useful in-service life. The optical gamma thermometer occupies much less space within the in-core instrument tube and costs much less than the conventional gamma thermometer.

Koster, Glen Peter; Xia, Hua; Lee, Boon Kwee

2013-08-06T23:59:59.000Z

389

Absorbance modulation optical lithography  

E-Print Network [OSTI]

In this thesis, the concept of absorbance-modulation optical lithography (AMOL) is described, and the feasibility experimentally verified. AMOL is an implementation of nodal lithography, which is not bounded by the diffraction ...

Tsai, Hsin-Yu Sidney

2007-01-01T23:59:59.000Z

390

Fiber optic fluid detector  

DOE Patents [OSTI]

Particular gases or liquids are detected with a fiber optic element having a cladding or coating of a material which absorbs the fluid or fluids and which exhibits a change of an optical property, such as index of refraction, light transmissiveness or fluoresence emission, for example, in response to absorption of the fluid. The fluid is sensed by directing light into the fiber optic element and detecting changes in the light, such as exit angle changes for example, that result from the changed optical property of the coating material. The fluid detector may be used for such purposes as sensing toxic or explosive gases in the atmosphere, measuring ground water contamination or monitoring fluid flows in industrial processes, among other uses. 10 figs.

Angel, S.M.

1987-02-27T23:59:59.000Z

391

Electro-Optical Characterization  

SciTech Connect (OSTI)

In the Electro-Optical Characterization group, within the National Center for Photovoltaic's Measurements and Characterization Division, we use various electrical and optical experimental techniques to relate photovoltaic device performance to the methods and materials used to produce them. The types of information obtained by these techniques range from small-scale atomic-bonding information to large-scale macroscopic quantities such as optical constants and electron-transport properties. Accurate and timely measurement of the electro-optical properties as a function of device processing provides researchers and manufacturers with the knowledge needed to troubleshoot problems and develop the knowledge base necessary for reducing cost, maximizing efficiency, improving reliability, and enhancing manufacturability. We work collaboratively with you to solve materials- and device-related R&D problems. This sheet summarizes our primary techniques and capabilities.

Not Available

2006-06-01T23:59:59.000Z

392

Optical Quantum Computation  

E-Print Network [OSTI]

We review the field of Optical Quantum Computation, considering the various implementations that have been proposed and the experimental progress that has been made toward realizing them. We examine both linear and nonlinear approaches and both particle and field encodings. In particular we discuss the prospects for large scale optical quantum computing in terms of the most promising physical architectures and the technical requirements for realizing them.

T. C. Ralph; G. J. Pryde

2011-03-31T23:59:59.000Z

393

Relaying an optical wavefront  

DOE Patents [OSTI]

A wavefront rely devices samples an incoming optical wavefront at different locations, optically relays the samples while maintaining the relative position of the samples and the relative phase between the samples. The wavefront is reconstructed due to interference of the samples. Devices can be designed for many different wavelengths, including for example the ultraviolet, visible, infrared and even longer wavelengths such as millimeter waves. In one application, the device function as a telescope but with negligible length.

Sweatt, William C. (Albuquerque, NM); Vawter, G. Allen (Corrales, NM)

2007-03-06T23:59:59.000Z

394

Fault location in optical networks  

DOE Patents [OSTI]

One apparatus embodiment includes an optical emitter and a photodetector. At least a portion of the optical emitter extends a radial distance from a center point. The photodetector provided around at least a portion of the optical emitter and positioned outside the radial distance of the portion of the optical emitter.

Stevens, Rick C. (Apple Valley, MN); Kryzak, Charles J. (Mendota Heights, MN); Keeler, Gordon A. (Albuquerque, NM); Serkland, Darwin K. (Albuquerque, NM); Geib, Kent M. (Tijeras, NM); Kornrumpf, William P. (Schenectady, NY)

2008-07-01T23:59:59.000Z

395

Optical computing Damien Woods a  

E-Print Network [OSTI]

Optical computing Damien Woods a aDepartment of Computer Science and Artificial Intelligence Institute, Vierimaantie 5, 84100 Ylivieska, Finland Abstract In this survey we consider optical computers of such optical computing archi- tectures, including descriptions of the type of hardware commonly used in optical

Woods, Damien

396

Optical Solitons and their applications  

E-Print Network [OSTI]

Optical Solitons and their applications By: Mohammad Nopoush Supervisor: Professor Palffy-Muhoray #12;Definition Optical: Non-changing optical field during propagation due to delicate balance between nonlinear and linear effects. Nonlinear effects: Due to the optical Kerr effect (AC Kerr effect

Palffy-Muhoray, Peter

397

Undergraduate Handbook Dear Optics student,  

E-Print Network [OSTI]

Undergraduate Handbook Fall 2013 #12;2 Dear Optics student, It is my great pleasure to welcome you to The Institute of Optics. The Institute of Optics has been educating the next generation of leaders in the field since it was founded in 1929 as the first optics department in the country

Cantlon, Jessica F.

398

Embedded fiducials in optical surfaces  

DOE Patents [OSTI]

Embedded fiducials are provided in optical surfaces and a method for embedding the fiducials. Fiducials, or marks on a surface, are important for optical fabrication and alignment, particularly when individual optical elements are aspheres. Fiducials are used during the course of the polishing process to connect interferometric data, and the equation describing the asphere, to physical points on the optic. By embedding fiducials below the surface of the optic and slightly outside the clear aperture of the optic, the fiducials are not removed by polishing, do not interfere with the polishing process, and do not affect the performance of the finished optic.

Sommargren, Gary E. (Santa Cruz, CA)

2000-01-01T23:59:59.000Z

399

E-Print Network 3.0 - applied optical metrology Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optical Sciences Summary: Research - Quantum Optics Applied Optics & Photonics - Optoelectronics - Optical Communications - Medical... Optics Engineering - Optical System Design...

400

INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF OPTICS A: PURE AND APPLIED OPTICS Polarization Optics  

E-Print Network [OSTI]

INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF OPTICS A: PURE AND APPLIED OPTICS EDITORIAL Polarization Optics Guest Editors Jari Turunen University of Joensuu, Finland Asher A Friesem Weizmann Institute This special issue on Polarization Optics contains one review article and 23 research papers, many of which

Friesem, Asher A.

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

The eLog is a vital part of your licence with Access Copyright. It is your tool for reporting everything that is copied into coursepacks at your institution. The eLog spreadsheet will even automatically calculate the royalties payable just enter in the  

E-Print Network [OSTI]

calculate the royalties payable ­ just enter in the relevant information. Based on your feedback, we have refined the eLog to make it more user-friendly. This will help us ensure the appropriate royalties charged the appropriate royalty during each reporting period. The eLog contains a feature

Boonstra, Rudy

402

Quantifying the Permeability Heterogeneity of Sandstone Reservoirs in Boonsville Field, Texas by Integrating Core, Well Log and 3 D Seismic Data  

E-Print Network [OSTI]

the permeability heterogeneity of the target reservoir by integrating core, well log and 3 D seismic data. A set of permeability coefficients, variation coefficient, dart coefficient, and contrast coefficient, was defined in this study to quantitatively identify...

Song, Qian

2013-04-29T23:59:59.000Z

403

Estimation of Dry-Rock Elastic Moduli Based on the Simulation of Mud-Filtrate Invasion Effects on Borehole Acoustic Logs  

E-Print Network [OSTI]

Effects on Borehole Acoustic Logs Tobiloluwa Odumosu, SPE, Carlos Torres-Verdín, SPE, Jesús M Salazar, SPE. Jun Ma, Ben Voss, and Gong Li Wang, SPE, The University of Texas at Austin Copyright 2007, Society

Torres-Verdín, Carlos

404

Fiber optic hydrogen sensor  

DOE Patents [OSTI]

An apparatus and method for detecting a chemical substance by exposing an optic fiber having a core and a cladding to the chemical substance so that the chemical substance can be adsorbed onto the surface of the cladding. The optic fiber is coiled inside a container having a pair of valves for controlling the entrance and exit of the substance. Light from a light source is received by one end of the optic fiber, preferably external to the container, and carried by the core of the fiber. Adsorbed substance changes the transmissivity of the fiber as measured by a spectrophotometer at the other end, also preferably external to the container. Hydrogen is detected by the absorption of infrared light carried by an optic fiber with a silica cladding. Since the adsorption is reversible, a sensor according to the present invention can be used repeatedly. Multiple positions in a process system can be monitored using a single container that can be connected to each location to be monitored so that a sample can be obtained for measurement, or, alternatively, containers can be placed near each position and the optic fibers carrying the partially-absorbed light can be multiplexed for rapid sequential reading by a single spectrophotometer.

Buchanan, Bruce R. (1985 Willis, Batesburg, SC 29006); Prather, William S. (2419 Dickey Rd., Augusta, GA 30906)

1992-01-01T23:59:59.000Z

405

Optical high acidity sensor  

DOE Patents [OSTI]

An apparatus and method for determining acid concentrations in solutions having acid concentrations of from about 0.1 Molar to about 16 Molar is disclosed. The apparatus includes a chamber for interrogation of the sample solution, a fiber optic light source for passing light transversely through the chamber, a fiber optic collector for receiving the collimated light after transmission through the chamber, a coating of an acid resistant polymeric composition upon at least one fiber end or lens, the polymeric composition in contact with the sample solution within the chamber and having a detectable response to acid concentrations within the range of from about 0.1 Molar to about 16 Molar, a measurer for the response of the polymeric composition in contact with the sample solution, and, a comparer of the measured response to predetermined standards whereby the acid molarity of the sample solution within the chamber can be determined. Preferably, a first lens is attached to the end of the fiber optic light source, the first lens adapted to collimate light from the fiber optic light source, and a second lens is attached to the end of the fiber optic collector for focusing the collimated light after transmission through the chamber.

Jorgensen, Betty S. (Jemez Springs, NM); Nekimken, Howard L. (Los Alamos, NM); Carey, W. Patrick (Lynnwood, WA); O'Rourke, Patrick E. (Martinez, GA)

1997-01-01T23:59:59.000Z

406

Fiber optic hydrogen sensor  

DOE Patents [OSTI]

Apparatus and method for detecting a chemical substance by exposing an optic fiber having a core and a cladding to the chemical substance so that the chemical substance can be adsorbed onto the surface of the cladding. The optic fiber is coiled inside a container having a pair of valves for controlling the entrance and exit of the substance. Light from a light source is received by one end of the optic fiber, preferably external to the container, and carried by the core of the fiber. Adsorbed substance changes the transmissivity of the fiber as measured by a spectrophotometer at the other end, also preferably external to the container. Hydrogen is detected by the absorption of infrared light carried by an optic fiber with a silica cladding. Since the adsorption is reversible, a sensor according to the present invention can be used repeatedly. Multiple positions in a process system can be monitored using a single container that can be connected to each location to be monitored so that a sample can be obtained for measurement, or, alternatively, containers can be placed near each position and the optic fibers carrying the partially-absorbed light can be multiplexed for rapid sequential reading, by a single spectrophotometer.

Buchanan, B.R.; Prather, W.S.

1991-01-01T23:59:59.000Z

407

Fiber optic hydrogen sensor  

DOE Patents [OSTI]

An apparatus and method are described for detecting a chemical substance by exposing an optic fiber having a core and a cladding to the chemical substance so that the chemical substance can be adsorbed onto the surface of the cladding. The optic fiber is coiled inside a container having a pair of valves for controlling the entrance and exit of the substance. Light from a light source is received by one end of the optic fiber, preferably external to the container, and carried by the core of the fiber. Adsorbed substance changes the transmissivity of the fiber as measured by a spectrophotometer at the other end, also preferably external to the container. Hydrogen is detected by the absorption of infrared light carried by an optic fiber with a silica cladding. Since the adsorption is reversible, a sensor according to the present invention can be used repeatedly. Multiple positions in a process system can be monitored using a single container that can be connected to each location to be monitored so that a sample can be obtained for measurement, or, alternatively, containers can be placed near each position and the optic fibers carrying the partially-absorbed light can be multiplexed for rapid sequential reading by a single spectrophotometer. 4 figs.

Buchanan, B.R.; Prather, W.S.

1992-10-06T23:59:59.000Z

408

Optical quantum memory  

E-Print Network [OSTI]

Quantum memory is important to quantum information processing in many ways: a synchronization device to match various processes within a quantum computer, an identity quantum gate that leaves any state unchanged, and a tool to convert heralded photons to photons-on-demand. In addition to quantum computing, quantum memory would be instrumental for the implementation of long-distance quantum communication using quantum repeaters. The importance of this basic quantum gate is exemplified by the multitude of optical quantum memory mechanisms being studied: optical delay lines, cavities, electromagnetically-induced transparency, photon-echo, and off-resonant Faraday interaction. Here we report on the state-of-the-art in the field of optical quantum memory, including criteria for successful quantum memory and current performance levels.

A. I. Lvovsky; B. C. Sanders; W. Tittel

2010-02-24T23:59:59.000Z

409

Development and anlysis of fast, approximate 3D Algorithms for interpretation of multi-component induction logging data  

SciTech Connect (OSTI)

This report addresses the effects of electrical anisotropy on the 3D inversion of single-well induction logging data when anisotropy is not considered. Of concern are possible artifacts that may lead to an incorrect interpretation of the formation about the borehole. Comparison is made of 3D isotropic inversion on a suite of model data, with and without anisotropy, consisting of an infinite layer and layer terminated at the borehole. In both cases, the layer dip (or well deviation) is varied. Inversion of the anisotropic data result in an overestimate of the layer conductivity, and the lateral extent of the layer about the borehole.

David L. Alumbaugh

2006-07-03T23:59:59.000Z

410

Log-derived evaluation of gas-bearing Cherokee, Red Fork, and Morrow formations, Custer County, OK  

SciTech Connect (OSTI)

Medium to low porosity and rather tight Cherokee, Red Fork and Morrow sands, located in Oklahoma, contain significant hydrocarbon resources. To evaluate the commercial importance of wells drilled in Custer County, Oklahoma, an innovative digital shaly sand analysis approach (CLASS - Epilog) has been applied, which provides information on total and effective reservoir porosity, total and effective fluid distribution based on the Waxman-Smits equation, shaliness, clay typing, and reservoir productivity. Several field case examples are presented and discussed based on (1) open hole logging suite, consisting of induction, compensated density/neutron and Spectralog, (2) CLASS analysis, (3) well completion and stimulation data, and (4) the resulting production test results.

Busch, E.A.; Fertl, W.H.; Neill, B.E.; Sinha, A.K.; Sobkowich, K.N.

1985-03-01T23:59:59.000Z

411

Optical dichroism in nanotubes  

Science Journals Connector (OSTI)

Utilizing the line-group symmetry of single-wall nanotubes, we have assigned their electron-energy bands by symmetry-based quantum numbers. The selection rules for optical absorption are presented in terms of these quantum numbers. Different interband transitions become allowed as the polarization of incident light is varied, and we predict a substantial optical dichroism. We suggest how to observe this effect in experiments on a single nanotube, and how it can be used to control quantum transport in nanotubes to obtain information about the structure.

I. Boovi?; N. Boovi?; M. Damnjanovi?

2000-09-15T23:59:59.000Z

412

Solid state optical microscope  

DOE Patents [OSTI]

A solid state optical microscope wherein wide-field and high-resolution images of an object are produced at a rapid rate by utilizing conventional optics with a charge-coupled photodiode array. A galvanometer scanning mirror, for scanning in one of two orthogonal directions is provided, while the charge-coupled photodiode array scans in the other orthogonal direction. Illumination light from the object is incident upon the photodiodes, creating packets of electrons (signals) which are representative of the illuminated object. The signals are then processed, stored in a memory, and finally displayed as a video signal. 2 figs.

Young, I.T.

1983-08-09T23:59:59.000Z

413

Solid state optical microscope  

DOE Patents [OSTI]

A solid state optical microscope wherein wide-field and high-resolution images of an object are produced at a rapid rate by utilizing conventional optics with a charge-coupled photodiode array. A galvanometer scanning mirror, for scanning in one of two orthogonal directions is provided, while the charge-coupled photodiode array scans in the other orthogonal direction. Illumination light from the object is incident upon the photodiodes, creating packets of electrons (signals) which are representative of the illuminated object. The signals are then processed, stored in a memory, and finally displayed as a video signal.

Young, Ian T. (Pleasanton, CA)

1983-01-01T23:59:59.000Z

414

Full spectrum optical safeguard  

DOE Patents [OSTI]

An optical safeguard device with two linear variable Fabry-Perot filters aligned relative to a light source with at least one of the filters having a nonlinear dielectric constant material such that, when a light source produces a sufficiently high intensity light, the light alters the characteristics of the nonlinear dielectric constant material to reduce the intensity of light impacting a connected optical sensor. The device can be incorporated into an imaging system on a moving platform, such as an aircraft or satellite.

Ackerman, Mark R. (Albuquerque, NM)

2008-12-02T23:59:59.000Z

415

High-index-contrast electromechanical optical switches  

E-Print Network [OSTI]

System developers are looking to replace protocol-dependent, bandwidth-limited optical networks with intelligent optically-transparent integrated photonic networks. Several electromechanical optical switches are explored ...

Bryant, Reginald (Reginald Eugene), 1978-

2011-01-01T23:59:59.000Z

416

2.71 Optics, Fall 2001  

E-Print Network [OSTI]

Introduction to optical science with elementary engineering applications. Geometrical optics: ray-tracing, aberrations, lens design, apertures and stops, radiometry and photometry. Wave optics: basic electrodynamics, ...

Barbastathis, George

417

Multi-Scale Optical Coherence Tomography Imaging  

E-Print Network [OSTI]

Fourier domain optical coherence tomography and methods forspeed spectral-domain optical coherence tomography at 1.3umJ. G. (1991). Optical coherence tomography. Science, 254(

Oliveira, Michael

2014-01-01T23:59:59.000Z

418

Integrated optics and new wave phenomena in optical waveguides  

Science Journals Connector (OSTI)

Research in integrated optics has two goals: One is to apply thin-film technology to the formation of optical devices and circuits. The other is the integration of a large number of optical devices on a small substrate, so forming an optical circuit reminiscent of the integrated circuit in microelectronics. The result is a new breed of optical devices in the form of miniature optical waveguides. They include lasers, modulators, switches, detectors, prisms, lenses, and polarizers, and many of them have efficiencies better than their bulk counterparts. Simple integrated optical circuits have also been constructed, and rapidly advancing semiconductor technology indicates that monolithic integrated optical circuits can readily be developed using GaAs-related compounds. In this paper, we review the state-of-the-art of integrated optics and explore new wave phenomena in optical circuits. The specific topics to be discussed are: light-wave couplers and m-line spectroscopy, refraction and reflection of light in thin films, normal modes of the uniform, the graded and the metal-clad waveguides, optics in tapered films, theory of corrugated waveguides, and more importantly, physics of various thin-film optical devices and the method of the circuit formation.

P. K. Tien

1977-04-01T23:59:59.000Z

419

Bachelor of Science Degree in Optics Bachelor of Science Degree in Optical Engineering  

E-Print Network [OSTI]

Bachelor of Science Degree in Optics Bachelor of Science Degree in Optical Engineering The Institute of Optics Major Requirements OPT 201 Geometrical Optics Lab (2 cr.) OPT 202 Physical Optics Lab (2 Theory of Optics OPT 225 Optical Sources and Detectors OPT 241 Geometrical Optics OPT 242 Aberrations

420

Bachelor of Science Degree in Optics Bachelor of Science Degree in Optical Engineering  

E-Print Network [OSTI]

Bachelor of Science Degree in Optics Bachelor of Science Degree in Optical Engineering The Institute of Optics Major Requirements OPT 197 Geometrical Optics Lab (2 cr.) OPT 198 Physical Optics Lab (2 Theory of Optics OPT 225 Optical Sources and Detectors OPT 241 Geometrical Optics OPT 242 Aberrations

Mahon, Bradford Z.

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

High throughput optical scanner  

DOE Patents [OSTI]

A scanning apparatus is provided to obtain automated, rapid and sensitive scanning of substrate fluorescence, optical density or phosphorescence. The scanner uses a constant path length optical train, which enables the combination of a moving beam for high speed scanning with phase-sensitive detection for noise reduction, comprising a light source, a scanning mirror to receive light from the light source and sweep it across a steering mirror, a steering mirror to receive light from the scanning mirror and reflect it to the substrate, whereby it is swept across the substrate along a scan arc, and a photodetector to receive emitted or scattered light from the substrate, wherein the optical path length from the light source to the photodetector is substantially constant throughout the sweep across the substrate. The optical train can further include a waveguide or mirror to collect emitted or scattered light from the substrate and direct it to the photodetector. For phase-sensitive detection the light source is intensity modulated and the detector is connected to phase-sensitive detection electronics. A scanner using a substrate translator is also provided. For two dimensional imaging the substrate is translated in one dimension while the scanning mirror scans the beam in a second dimension. For a high throughput scanner, stacks of substrates are loaded onto a conveyor belt from a tray feeder.

Basiji, David A. (Seattle, WA); van den Engh, Gerrit J. (Seattle, WA)

2001-01-01T23:59:59.000Z

422

Split image optical display  

DOE Patents [OSTI]

A video image is displayed from an optical panel by splitting the image into a plurality of image components, and then projecting the image components through corresponding portions of the panel to collectively form the image. Depth of the display is correspondingly reduced.

Veligdan, James T. (Manorville, NY)

2007-05-29T23:59:59.000Z

423

Quantum Optics (Nir Davidson -  

E-Print Network [OSTI]

Capacity and Cost Effectiveness Enhancment Technique Using a Combined Time Division and Multilevel California, USA, "Advanced System Functions in Optical Communications Using E-O Technologies" Moshe Nazarathy for fabricating printed circuit boards" Solar Cells (Jeffrey Gordon, Uzi Efron - Ben- Gurion University) David

Ribak, Erez

424

Glass for Optical Purposes  

Science Journals Connector (OSTI)

... THE importance of an adequate supply of optical glass of all the principal types cannot be overestimated. The improvement of the microscope has ... improvement of the microscope has been and is still retarded for the want of suitable glasses, the construction of large telescopes is limited by the capacity of the glassmaker to ...

S. D. CHALMERS

1914-10-01T23:59:59.000Z

425

Optical pumping of ions  

Science Journals Connector (OSTI)

Radiofrequency spectroscopy has been extended to positive ions with S ground states by means of optical pumping. The ions are stored in buffer gases or ion traps and are polarized directly by optical pumping or indirectly by spin exchange, change exchange, or Penning ionization with optically pumped atoms. The applied methods are described. The experiments can be divided into two categories: Collisional interactions of the polarized ions are investigated, like the exchange processes mentioned above, spin exchange with free electrons, spin depolarization and hyperfine density shifts in rare gases. For the two latter effects drastic differences are observed between atomic and ionic 2S12 states the explanations of which reveal the influence of the ionic charge on the interactions. The comparison of equivalent processes involving isoelectronic 2S or 2P configurations of atoms and ions provides a test of current collision theories. Precision rf spectroscopy of ionic ground states yields the 2S12 hyperfine structure splittings of 3He+ and group II ions with relative accuracies of up to 10?9, with further improvement possible. Direct and indirect optical pumping of 1S0 ions is used to determine nuclear magnetic moments, diamagnetic shielding coefficients, and chemical shifts. Applications and further developments of the present methods are discussed.

E.W. Weber

1977-01-01T23:59:59.000Z

426

Optical imaging of Rydberg atoms  

E-Print Network [OSTI]

We present an experiment exploring electromagnetically induced transparency (EIT) in Rydberg atoms in order to observe optical nonlinearities at the single photon level. ??Rb atoms are trapped and cooled using a magneto-optical ...

Mazurenko, Anton

2012-01-01T23:59:59.000Z

427

Miniature MT optical assembly (MMTOA)  

DOE Patents [OSTI]

An optical assembly (10) includes a rigid mount (12) with a recess (26) proximate a first side thereof, a substrate (14), and an optical die (16) flip-chip bonded to the substrate (14). The substrate (14) is secured to the first side of the mount and includes a plurality of die bonding elements (40), a plurality of optical apertures (32), and a plurality of external bonding elements (42). A plurality of traces (44) interconnect the die bonding elements (40) and the external bonding elements (42). The optical die (16) includes a plurality of optical elements, each element including an optical signal interface (48), the die being bonded to the plurality of die bonding elements (40) such that the optical signal interface (48) of each element is in registry with an optical aperture (32) of the substrate (14) and the die (16) is at least partially enclosed by the recess (26).

Laughlin, Daric (Overland Park, KS); Abel, Phillip (Overland Park, KS)

2008-04-01T23:59:59.000Z

428

Science, Optics and You Guidebook  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- i - INTRODUCTION WHAT IS SCIENCE, 0PTICS & YOU? The Science, Optics and You Guidebook is made up as follows: Science, Optics and You is a standards-based interdisciplinary...

429

Science, Optics and You: Introduction  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- i - INTRODUCTION WHAT IS SCIENCE, 0PTICS & YOU? The Science, Optics and You Guidebook is made up as follows: Science, Optics and You is a standards-based interdisciplinary...

430

Crooker named Optical Society Fellow  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Crooker named Optical Society Fellow January 23, 2014 Scott Crooker of LANL's Condensed Matter and Magnet Science group is a 2014 Fellow of the Optical Society (OSA). The Society...

431

Consortium for coal log pipeline research and development. Final technical progress report, August 10, 1993--August 9, 1996  

SciTech Connect (OSTI)

The main objective of this project was to conduct intensive research and development of the Coal Log Pipeline (CLP). Specifically, the R & D was to concentrate on previously neglected and insufficiently studied aspects of CLP which were deemed significant. With improvements in these areas, CLP could be implemented for commercial use within five years. CLP technology is capable of transporting coal logs for long distances. The many potential advantages of CLP over truck and railroad transportation include: lower freight costs, less energy consumption, less air pollution, decreased environmental problems, increased safety, and improved reliability. Previous studies have shown that CLP is advantageous over slurry pipeline technology. First, CLP uses one-third the water required by a coal slurry pipeline. Second, CLP provides easier coal dewatering. Third, the CLP conveying capacity of coal is twice as much as a slurry transport line of equal diameter. In many situations, the cost for transporting each ton of coal is expected to be less expensive by CLP as compared to other competing modes of transportation such as: truck, unit train and slurry pipeline.

Marrero, T.R.

1996-10-01T23:59:59.000Z

432

The stratigraphy of selected Mission Canyon wireline log markers, US portion of the Williston basin, North Dakota  

SciTech Connect (OSTI)

The Mission Canyon Formation along the northeast flank of the US Williston basin has been informally subdivided into intervals (members) based on wireline log markers. Wireline log responses of the markers are produced by both lithologic changes and radioactive elements present within these thin stratigraphic intervals. The wireline markers were originally described as transgressive events. Detailed stratigraphic analyses of the Sherwood and State A markers indicate they were deposited during progradation and sea level stillstand. A typical facies tract from east to west within the Sherwood marker contains anhydrites and anhydritic dolomites deposited in sabkha environments; patterned dolomudstones along shoreline trends (the Sherwood argillaceous marker); and limestones in shoaling environments along the Mission Canyon shelf (Sherwood gamma marker). During stillstand, brines produced in sabkha environments (east of the Sherwood shoreline) were enriched in magnesium and potassium. These brines migrated basinward first, dolomitizing mudstones. These brines were magnesium depleted by the time they reached shoals along the shelf. Potassium, however, remained in the system and is present within the marker along the shelf, as shown by a slight increase in API units on Spectrologs.

Hendricks, M.L. (Hendricks and Associates, Inc., Denver, CO (United States))

1991-06-01T23:59:59.000Z

433

Large core fiber optic cleaver  

DOE Patents [OSTI]

The present invention relates to a device and method for cleaving optical fibers which yields cleaved optical fiber ends possessing high damage threshold surfaces. The device can be used to cleave optical fibers with core diameters greater than 400 {micro}m. 30 figs.

Halpin, J.M.

1996-03-26T23:59:59.000Z

434

Optical computing Damien Woods a  

E-Print Network [OSTI]

Optical computing Damien Woods a aDepartment of Computer Science and Artificial Intelligence Institute, Vierimaantie 5, 84100 Ylivieska, Finland Abstract We consider optical computers that encode data using images and compute by transforming such images. We give an overview of a number of such optical

Woods, Damien

435

Nonlinear optics at maximum coherence  

Science Journals Connector (OSTI)

...D. Walls Nonlinear optics at maximum coherence S. E. Harris G. Y. Yin M. Jain H...optical processes which utilize maximum coherence of a non-allowed transition. The nonlinear...frequency. Nonlinear optics at maximum coherence B y S. E. Harris, G. Y. Yin, M...

1997-01-01T23:59:59.000Z

436

Aerogel-clad optical fiber  

DOE Patents [OSTI]

An optical fiber is surrounded by an aerogel cladding. For a low density aerogel, the index of refraction of the aerogel is close to that of air, which provides a high numerical aperture to the optical fiber. Due to the high numerical aperture, the aerogel clad optical fiber has improved light collection efficiency.

Sprehn, Gregory A. (Livermore, CA); Hrubesh, Lawrence W. (Pleasanton, CA); Poco, John F. (Livermore, CA); Sandler, Pamela H. (San Marino, CA)

1997-01-01T23:59:59.000Z

437

In situ optical sensing of diesel exhaust particulates using a polychromatic  

Science Journals Connector (OSTI)

A novel optical probe for in situ monitoring of diesel exhaust particulates has been developed and is demonstrated. The probe uses a transmissive configuration to interrogate a particulate stream using polychromatic (white) light from an electroluminescent LED, the probe being mounted transversely to the exhaust flow in the tailpipe. Consequently the effects of scattering and absorption are measured on the transmission spectrum. The optical signal is relayed via an optical fibre bundle to a remote detection and data logging unit. Photodetector signals representing red, green and blue spectral information are monitored using detectors having overlapping spectral responsivities. Data collection is by redgreenblue (RGB) tristimulus detection and spectral analysis uses the huelightnesssaturation (HLS) algorithms. It is shown that changes in spectral width may be used to represent particulate bursts (scattering) via the saturation parameter with a compensation algorithm being used to compensate for shifts in the operating point due to contamination of the optics. As polychromatic light is used it is demonstrated that variation in the mean particle size may be represented in terms of the ratios of polydisperse extinction for adjacent spectral bands. The potential advantages of chromatic sensing for signal processing in terms of reduced susceptibility to vapour content and optical contamination is demonstrated by comparison with an intensity based sensor.

R A Aspey; K J Brazier

2003-01-01T23:59:59.000Z

438

Optical Tweezer Arrays and Optical Substrates Created with Diffractive Optics Eric R. Dufresne and David G. Grier  

E-Print Network [OSTI]

Optical Tweezer Arrays and Optical Substrates Created with Diffractive Optics Eric R. Dufresne optical tweezers from a single laser beam using diffractive optical elements. As a demonstration of this technique, we have implemented a 4 \\Theta 4 square array of optical tweezers -- the hexadeca

Grier, David

439

Bonded, walk-off compensated optical elements  

DOE Patents [OSTI]

A bonded, walk-off compensated crystal, for use with optical equipment, and methods of making optical components including same.

Ebbers, Christopher A. (Livermore, CA)

2003-04-08T23:59:59.000Z

440

Inference of strata separation and gas emission paths in longwall overburden using continuous wavelet transform of well logs and geostatistical simulation  

Science Journals Connector (OSTI)

Abstract Prediction of potential methane emission pathways from various sources into active mine workings or sealed gobs from longwall overburden is important for controlling methane and for improving mining safety. The aim of this paper is to infer strata separation intervals and thus gas emission pathways from standard well log data. The proposed technique was applied to well logs acquired through the Mary Lee/Blue Creek coal seam of the Upper Pottsville Formation in the Black Warrior Basin, Alabama, using well logs from a series of boreholes aligned along a nearly linear profile. For this purpose, continuous wavelet transform (CWT) of digitized gamma well logs was performed by using Mexican hat and Morlet, as the mother wavelets, to identify potential discontinuities in the signal. Pointwise Hlder exponents (PHE) of gamma logs were also computed using the generalized quadratic variations (GQV) method to identify the location and strength of singularities of well log signals as a complementary analysis. \\{PHEs\\} and wavelet coefficients were analyzed to find the locations of singularities along the logs. Using the well logs in this study, locations of predicted singularities were used as indicators in single normal equation simulation (SNESIM) to generate equi-probable realizations of potential strata separation intervals. Horizontal and vertical variograms of realizations were then analyzed and compared with those of indicator data and training image (TI) data using the KruskalWallis test. A sum of squared differences was employed to select the most probable realization representing the locations of potential strata separations and methane flow paths. Results indicated that singularities located in well log signals reliably correlated with strata transitions or discontinuities within the strata. Geostatistical simulation of these discontinuities provided information about the location and extents of the continuous channels that may form during mining. If there is a gas source within their zone of influence, paths may develop and allow methane movement towards sealed or active gobs under pressure differentials. Knowledge gained from this research will better prepare mine operations for potential methane inflows, thus improving mine safety.

C. zgen Karacan; Ricardo A. Olea

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Large optics inspection, tilting, and washing stand  

DOE Patents [OSTI]

A large optics stand provides a risk free means of safely tilting large optics with ease and a method of safely tilting large optics with ease. The optics are supported in the horizontal position by pads. In the vertical plane the optics are supported by saddles that evenly distribute the optics weight over a large area.

Ayers, Marion Jay (Brentwood, CA); Ayers, Shannon Lee (Brentwood, CA)

2010-08-24T23:59:59.000Z

442

[open quotes]2-Step[close quotes] log analysis of the Spellacy reservoir in the giant Midway-Sunset Field, Kern County, California  

SciTech Connect (OSTI)

A technique is presented for simple, effective log analysis of (Miocene) [open quotes]Spellacy[close quotes] sands and conglomerates of the Santa Margarita Formation at Midway-Sunset Field in Kern County, California. Results are shown graphically on the log display and are quantified for mapping. Requirements are digital wireline data -- in this simple case, just resistivity and porosities - and flexible log analysis software such as QLA2[trademark]. The first step of this technique discriminates between reservoir-quality and non-reservoir-quality intervals yielding three color-coded categories. A narrow color-filled column is added to the well log display to graphically communicate the vertical distribution of reservoir-quality and barrier intervals. The second step performs a fluid analysis on the reservoir-quality category (intervals) yielding three more color-coded categories. The results of the fluid analysis are graphically displayed in a second narrow color-filled column on the well log. Analysis results are captured from a tabular report for mapping. Quantifiable products include (1) thicknesses: original net pay, current net pay, reservoir quality, total sand, total porosity, phi-H, etc.; (2) averages: original net pay porosity; current net pay porosity, current net pay saturation, current net pay bulk volume oil, etc.; and (3) ratios: thickness of reservoir quality to total sand and thickness of current net pay to total interval.

Sturm, D.H. (Santa Fe Energy Resources, Bakersfield, CA (United States))

1996-01-01T23:59:59.000Z

443

{open_quotes}2-Step{close_quotes} log analysis of the Spellacy reservoir in the giant Midway-Sunset Field, Kern County, California  

SciTech Connect (OSTI)

A technique is presented for simple, effective log analysis of (Miocene) {open_quotes}Spellacy{close_quotes} sands and conglomerates of the Santa Margarita Formation at Midway-Sunset Field in Kern County, California. Results are shown graphically on the log display and are quantified for mapping. Requirements are digital wireline data -- in this simple case, just resistivity and porosities - and flexible log analysis software such as QLA2{trademark}. The first step of this technique discriminates between reservoir-quality and non-reservoir-quality intervals yielding three color-coded categories. A narrow color-filled column is added to the well log display to graphically communicate the vertical distribution of reservoir-quality and barrier intervals. The second step performs a fluid analysis on the reservoir-quality category (intervals) yielding three more color-coded categories. The results of the fluid analysis are graphically displayed in a second narrow color-filled column on the well log. Analysis results are captured from a tabular report for mapping. Quantifiable products include (1) thicknesses: original net pay, current net pay, reservoir quality, total sand, total porosity, phi-H, etc.; (2) averages: original net pay porosity; current net pay porosity, current net pay saturation, current net pay bulk volume oil, etc.; and (3) ratios: thickness of reservoir quality to total sand and thickness of current net pay to total interval.

Sturm, D.H. [Santa Fe Energy Resources, Bakersfield, CA (United States)

1996-12-31T23:59:59.000Z

444

Methods and apparatus to produce stick-slip motion of logging tool attached to a wireline drawn upward by a continuously rotating wireline drum  

DOE Patents [OSTI]

Methods and apparatus are described to produce stick-slip motion of a logging tool within a cased well attached to a wireline that is drawn upward by a continuously rotating wireline drum. The stick-slip motion results in the periodic upward movement of the tool in the cased well described in terms of a dwell time during which time the tool is stationary, the move time during which time the tool moves, and the stroke that is upward distance that the tool translates during the "slip" portion of the stick-slip motion. This method of measurement is used to log the well at different vertical positions of the tool. Therefore, any typical "station-to-station logging tool" may be modified to be a "continuous logging tool", where "continuous" means that the wireline drum continually rotates while the tool undergoes stick-slip motion downhole and measurements are performed during the dwell times when the tool is momentarily stationary. The stick-slip methods of operation and the related apparatus are particularly described in terms of making measurements of formation resistivity from within a cased well during the dwell times when the tool is momentarily stationary during the periodic stick-slip motion of the logging tool.

Vail, III, William Banning (Bothell, WA); Momii, Steven Thomas (Seattle, WA)

1998-01-01T23:59:59.000Z

445

Methods and apparatus to produce stick-slip motion of logging tool attached to a wireline drawn upward by a continuously rotating wireline drum  

DOE Patents [OSTI]

Methods and apparatus are described to produce stick-slip motion of a logging tool within a cased well attached to a wireline that is drawn upward by a continuously rotating wireline drum. The stick-slip motion results in the periodic upward movement of the tool in the cased well described in terms of a dwell time during which time the tool is stationary, the move time during which time the tool moves, and the stroke that is upward distance that the tool translates during the ``slip`` portion of the stick-slip motion. This method of measurement is used to log the well at different vertical positions of the tool. Therefore, any typical ``station-to-station logging tool`` may be modified to be a ``continuous logging tool,`` where ``continuous`` means that the wireline drum continually rotates while the tool undergoes stick-slip motion downhole and measurements are performed during the dwell times when the tool is momentarily stationary. The stick-slip methods of operation and the related apparatus are particularly described in terms of making measurements of formation resistivity from within a cased well during the dwell times when the tool is momentarily stationary during the periodic stick-slip motion of the logging tool. 12 figs.

Vail, W.B. III; Momii, S.T.

1998-02-10T23:59:59.000Z

446

Optical Network Testbeds Workshop  

SciTech Connect (OSTI)

This is the summary report of the third annual Optical Networking Testbed Workshop (ONT3), which brought together leading members of the international advanced research community to address major challenges in creating next generation communication services and technologies. Networking research and development (R&D) communities throughout the world continue to discover new methods and technologies that are enabling breakthroughs in advanced communications. These discoveries are keystones for building the foundation of the future economy, which requires the sophisticated management of extremely large qualities of digital information through high performance communications. This innovation is made possible by basic research and experiments within laboratories and on specialized testbeds. Initial network research and development initiatives are driven by diverse motives, including attempts to solve existing complex problems, the desire to create powerful new technologies that do not exist using traditional methods, and the need to create tools to address specific challenges, including those mandated by large scale science or government agency mission agendas. Many new discoveries related to communications technologies transition to wide-spread deployment through standards organizations and commercialization. These transition paths allow for new communications capabilities that drive many sectors of the digital economy. In the last few years, networking R&D has increasingly focused on advancing multiple new capabilities enabled by next generation optical networking. Both US Federal networking R&D and other national R&D initiatives, such as those organized by the National Institute of Information and Communications Technology (NICT) of Japan are creating optical networking technologies that allow for new, powerful communication services. Among the most promising services are those based on new types of multi-service or hybrid networks, which use new optical networking technologies. Several years ago, when many of these optical networking research topics were first being investigated, they were the subject of controversial debate. The new techniques challenged many long-held concepts related to architecture and technology. However, today all major networking organizations are transitioning toward infrastructure that incorporates these new concepts. This progress has been assisted through the series of Optical Networking Testbed Workshops (ONT). The first (ONT1) outlined a general framework of key issues and topics and developed a series of recommendations (www.nren.nasa.gov/workshop7). The second (ONT2) developed a common vision of optical network technologies, services, infrastructure, and organizations (www.nren.nasa.gov/workshop8). Processes that allow for a common vision encourage widespread deployment of these types of resources among advanced networking communities. Also, such a shared vision enables key concepts and technologies to migrate from basic research testbeds to wider networking communities. The ONT-3 workshop built on these earlier activities by expanding discussion to include additional considerations of the international interoperability and of greater impact of optical networking technology on networking in general. In accordance with this recognition, the workshop confirmed that future-oriented research and development is indispensable to fundamentally change the current Internet architecture to create a global network incorporating completely new concepts. The workshop also recognized that the first priority to allow for this progress is basic research and development, including international collaborative activities, which are important for the global realization of interoperability of a new generation architecture.

Joe Mambretti

2007-06-01T23:59:59.000Z

447

Modular optical detector system  

DOE Patents [OSTI]

A modular optical detector system. The detector system is designed to detect the presence of molecules or molecular species by inducing fluorescence with exciting radiation and detecting the emitted fluorescence. Because the system is capable of accurately detecting and measuring picomolar concentrations it is ideally suited for use with microchemical analysis systems generally and capillary chromatographic systems in particular. By employing a modular design, the detector system provides both the ability to replace various elements of the detector system without requiring extensive realignment or recalibration of the components as well as minimal user interaction with the system. In addition, the modular concept provides for the use and addition of a wide variety of components, including optical elements (lenses and filters), light sources, and detection means, to fit particular needs.

Horn, Brent A. (Livermore, CA); Renzi, Ronald F. (Tracy, CA)

2006-02-14T23:59:59.000Z

448

LSST Camera Optics  

SciTech Connect (OSTI)

The Large Synoptic Survey Telescope (LSST) is a unique, three-mirror, modified Paul-Baker design with an 8.4m primary, a 3.4m secondary, and a 5.0m tertiary feeding a camera system that includes corrector optics to produce a 3.5 degree field of view with excellent image quality (<0.3 arcsecond 80% encircled diffracted energy) over the entire field from blue to near infra-red wavelengths. We describe the design of the LSST camera optics, consisting of three refractive lenses with diameters of 1.6m, 1.0m and 0.7m, along with a set of interchangeable, broad-band, interference filters with diameters of 0.75m. We also describe current plans for fabricating, coating, mounting and testing these lenses and filters.

Olivier, S S; Seppala, L; Gilmore, K; Hale, L; Whistler, W

2006-06-05T23:59:59.000Z

449

Fiber optic moisture sensor  

DOE Patents [OSTI]

A method and apparatus for sensing moisture changes by utilizing optical fiber technology. One embodiment uses a reflective target at the end of an optical fiber. The reflectance of the target varies with its moisture content and can be detected by a remote unit at the opposite end of the fiber. A second embodiment utilizes changes in light loss along the fiber length. This can be attributed to changes in reflectance of cladding material as a function of its moisture content. It can also be affected by holes or inserts interposed in the cladding material and/or fiber. Changing light levels can also be coupled from one fiber to another in an assembly of fibers as a function of varying moisture content in their overlapping lengths of cladding material.

Kirkham, R.R.

1984-08-03T23:59:59.000Z

450

Existence of Optical Vortices  

E-Print Network [OSTI]

Optical vortices arise as phase singularities of the light fields and are of central interest in modern optical physics. In this paper, some existence theorems are established for stationary vortex wave solutions of a general class of nonlinear Schr\\"{o}dinger equations. There are two types of results. The first type concerns the existence of positive-radial-profile solutions which are obtained through a constrained minimization approach. The second type addresses the existence of saddle-point solutions through a mountain-pass-theorem or min-max method so that the wave propagation constant may be arbitrarily prescribed in an open interval. Furthermore some explicit estimates for the lower bound and sign of the wave propagation constant with respect to the light beam power and vortex winding number are also derived for the first type solutions.

Yisong Yang; Ruifeng Zhang

2012-09-21T23:59:59.000Z

451

Use of treatment log files in spot scanning proton therapy as part of patient-specific quality assurance  

SciTech Connect (OSTI)

Purpose: The purpose of this work was to assess the monitor unit (MU) values and position accuracy of spot scanning proton beams as recorded by the daily treatment logs of the treatment control system, and furthermore establish the feasibility of using the delivered spot positions and MU values to calculate and evaluate delivered doses to patients. Methods: To validate the accuracy of the recorded spot positions, the authors generated and executed a test treatment plan containing nine spot positions, to which the authors delivered ten MU each. The spot positions were measured with radiographic films and Matrixx 2D ion-chambers array placed at the isocenter plane and compared for displacements from the planned and recorded positions. Treatment logs for 14 patients were then used to determine the spot MU values and position accuracy of the scanning proton beam delivery system. Univariate analysis was used to detect any systematic error or large variation between patients, treatment dates, proton energies, gantry angles, and planned spot positions. The recorded patient spot positions and MU values were then used to replace the spot positions and MU values in the plan, and the treatment planning system was used to calculate the delivered doses to patients. The results were compared with the treatment plan. Results: Within a treatment session, spot positions were reproducible within {+-}0.2 mm. The spot positions measured by film agreed with the planned positions within {+-}1 mm and with the recorded positions within {+-}0.5 mm. The maximum day-to-day variation for any given spot position was within {+-}1 mm. For all 14 patients, with {approx}1 500 000 spots recorded, the total MU accuracy was within 0.1% of the planned MU values, the mean (x, y) spot displacement from the planned value was (-0.03 mm, -0.01 mm), the maximum (x, y) displacement was (1.68 mm, 2.27 mm), and the (x, y) standard deviation was (0.26 mm, 0.42 mm). The maximum dose difference between calculated dose to the patient based on the plan and recorded data was within 2%. Conclusions: The authors have shown that the treatment log file in a spot scanning proton beam delivery system is precise enough to serve as a quality assurance tool to monitor variation in spot position and MU value, as well as the delivered dose uncertainty from the treatment delivery system. The analysis tool developed here could be useful for assessing spot position uncertainty and thus dose uncertainty for any patient receiving spot scanning proton beam therapy.

Li Heng; Sahoo, Narayan; Poenisch, Falk; Suzuki, Kazumichi; Li Yupeng; Li Xiaoqiang; Zhang Xiaodong; Gillin, Michael T.; Zhu, X. Ronald [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States); Lee, Andrew K. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States)

2013-02-15T23:59:59.000Z

452

MicroSight Optics  

SciTech Connect (OSTI)

MicroSight is an innovative gunsight technology that allows a marksman's eye to focus on both the front gunsight and the intended target. The MicroSight improves both firearm safety and performance by imaging two objects at different focal distances. The MicroSight was developed at Idaho National Laboratory, and has been licensed by Apollo Optical Systems. You can learn more about INL's research programs at http://www.facebook.com/idahonationallaboratory.

None

2010-01-01T23:59:59.000Z

453

Optically pulsed electron accelerator  

DOE Patents [OSTI]

An optically pulsed electron accelerator can be used as an injector for a free electron laser and comprises a pulsed light source, such as a laser, for providing discrete incident light pulses. A photoemissive electron source emits electron bursts having the same duration as the incident light pulses when impinged upon by same. The photoemissive electron source is located on an inside wall of a radiofrequency-powered accelerator cell which accelerates the electron burst emitted by the photoemissive electron source.

Fraser, J.S.; Sheffield, R.L.

1985-05-20T23:59:59.000Z

454

Fourier optics on graphene  

Science Journals Connector (OSTI)

Using numerical simulations, here, we demonstrate that a single sheet of graphene with properly designed inhomogeneous, nonuniform conductivity distributions can act as a convex lens for focusing and collimating the transverse-magnetic (TM) surface plasmon polariton (SPP) surface waves propagating along the graphene. Consequently, we show that the graphene can act as a platform for obtaining spatial Fourier transform of infrared (IR) SPP signals. This may lead to rebirth of the field of Fourier optics on a 1-atom-thick structure.

Ashkan Vakil and Nader Engheta

2012-02-27T23:59:59.000Z

455

Optically Controlled Jitter Generator  

E-Print Network [OSTI]

A new simple circuit producing random pulse trains is proposed and experimentally studied. The circuit is composed of an operational amplifier and two feedback links, one of which comprises two photodiodes. The photodiodes are responsible for nonlinearity in the feedback. By varying the illumination it is possible to control the nonlinearity in the photodiode current-voltage characteristics and change the degree of randomness in the oscillations. The circuit's simplicity and optical control make it attractive for coupled map lattices.

Julia Manasson; V. A. Manasson

2006-08-17T23:59:59.000Z

456

Fiber optic geophysical sensors  

DOE Patents [OSTI]

A fiber optic geophysical sensor in which laser light is passed through a sensor interferometer in contact with a geophysical event, and a reference interferometer not in contact with the geophysical event but in the same general environment as the sensor interferometer. In one embodiment, a single tunable laser provides the laser light. In another embodiment, separate tunable lasers are used for the sensor and reference interferometers. The invention can find such uses as monitoring for earthquakes, and the weighing of objects.

Homuth, Emil F. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

457

Optically pulsed electron accelerator  

DOE Patents [OSTI]

An optically pulsed electron accelerator can be used as an injector for a free electron laser and comprises a pulsed light source, such as a laser, for providing discrete incident light pulses. A photoemissive electron source emits electron bursts having the same duration as the incident light pulses when impinged upon by same. The photoemissive electron source is located on an inside wall of a radio frequency powered accelerator cell which accelerates the electron burst emitted by the photoemissive electron source.

Fraser, John S. (Los Alamos, NM); Sheffield, Richard L. (Los Alamos, NM)

1987-01-01T23:59:59.000Z

458

MicroSight Optics  

ScienceCinema (OSTI)

MicroSight is an innovative gunsight technology that allows a marksman's eye to focus on both the front gunsight and the intended target. The MicroSight improves both firearm safety and performance by imaging two objects at different focal distances. The MicroSight was developed at Idaho National Laboratory, and has been licensed by Apollo Optical Systems. You can learn more about INL's research programs at http://www.facebook.com/idahonationallaboratory.

None

2013-05-28T23:59:59.000Z

459

Optical fiber inspection system  

DOE Patents [OSTI]

A remote optical inspection system including an inspection head. The inspection head has a passageway through which pellets or other objects are passed. A window is provided along the passageway through which light is beamed against the objects being inspected. A plurality of lens assemblies are arranged about the window so that reflected light can be gathered and transferred to a plurality of coherent optical fiber light guides. The light guides transfer the light images to a television or other image transducer which converts the optical images into a representative electronic signal. The electronic signal can then be displayed on a signal viewer such as a television monitor for inspection by a person. A staging means can be used to support the objects for viewing through the window. Routing means can be used to direct inspected objects into appropriate exit passages for accepted or rejected objects. The inspected objects are advantageously fed in a singular manner to the staging means and routing means. The inspection system is advantageously used in an enclosure when toxic or hazardous materials are being inspected. 10 figs.

Moore, F.W.

1985-04-05T23:59:59.000Z

460

Virtual Optical Comparator  

SciTech Connect (OSTI)

The Virtual Optical Comparator, VOC, was conceived as a result of the limitations of conventional optical comparators and vision systems. Piece part designs for mechanisms have started to include precision features on the face of parts that must be viewed using a reflected image rather than a profile shadow. The VOC concept uses a computer generated overlay and a digital camera to measure features on a video screen. The advantage of this system is superior edge detection compared to traditional systems. No vinyl charts are procured or inspected. The part size and expensive fixtures are no longer a concern because of the range of the X-Y table of the Virtual Optical Comparator. Product redesigns require only changes to the CAD image overlays; new vinyl charts are not required. The inspection process is more ergonomic by allowing the operator to view the part sitting at a desk rather than standing over a 30 inch screen. The procurement cost for the VOC will be less than a traditional comparator with a much smaller footprint with less maintenance and energy requirements.

Thompson, Greg

2008-10-20T23:59:59.000Z

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Optical ionization detector  

DOE Patents [OSTI]

An optical ionization detector wherein a beam of light is split so that one arm passes through a fiber optics and the other arm passes through a gas-filled region, and uses interferometry to detect density changes in a gas when charged particles pass through it. The gas-filled region of the detector is subjected to a high electric field and as a charged particle traverses this gas region electrons are freed from the cathode and accelerated so as to generate an electron avalanche which is collected on the anode. The gas density is effected by the electron avalanche formation and if the index or refraction is proportional to the gas density the index will change accordingly. The detector uses this index change by modulating the one arm of the split light beam passing through the gas, with respect to the other arm that is passed through the fiber optic. Upon recombining of the beams, interference fringe changes as a function of the index change indicates the passage of charged particles through the gaseous medium. 3 figures.

Wuest, C.R.; Lowry, M.E.

1994-03-29T23:59:59.000Z

462

Optical ionization detector  

DOE Patents [OSTI]

An optical ionization detector wherein a beam of light is split so that one arm passes through a fiber optics and the other arm passes through a gas-filled region, and uses interferometry to detect density changes in a gas when charged particles pass through it. The gas-filled region of the detector is subjected to a high electric field and as a charged particle traverses this gas region electrons are freed from the cathode and accelerated so as to generate an electron avalanche which is collected on the anode. The gas density is effected by the electron avalanche formation and if the index or refraction is proportional to the gas density the index will change accordingly. The detector uses this index change by modulating the one arm of the split light beam passing through the gas, with respect to the other arm that is passed through the fiber optic. Upon recombining of the beams, interference fringe changes as a function of the index change indicates the passage of charged particles through the gaseous medium.

Wuest, Craig R. (Danville, CA); Lowry, Mark E. (Castro Valley, CA)

1994-01-01T23:59:59.000Z

463

Analysis and evaluation of interwell seismic logging techniques for reservoir characterization. [Quarterly report], April 1--June 30, 1993  

SciTech Connect (OSTI)

The objective of this three-year research program is to investigate interwell seismic logging techniques for indirectly interpreting oil and gas reservoir geology and rock physical properties. This work involves a balanced study of advanced theoretical and numerical modeling of seismic waves transmitted between pairs of reservoir wells combined with experimental dam acquisition and processing of measurements at controlled sites as well as in full-scale reservoirs. This reservoir probing concept is aimed at demonstrating high-resolution measurements and detailed interpretation of heterogeneous hydrocarbon-bearing formations. In this quarterly report technical progress is summarized for Task 3, data processing and analysis of: preliminary interpretation of interwell seismic data from wells 5-7 and 7-7 at the Gypsy Test Site; and the response of a thin layer in an anistropic shale.

Parra, J.O.

1993-12-31T23:59:59.000Z

464

Optical Microscopy and 4Optical Microscopy and 4 Pi MicroscopyPi Microscopy  

E-Print Network [OSTI]

Optical Microscopy and 4Optical Microscopy and 4 Pi MicroscopyPi Microscopy Carolyn A. SuttonCarolyn A. Sutton PH 464PH 464 #12;OverviewOverview The OpticalThe Optical MicroscopeMicroscopy 4 Pi Microscopy4 Pi Microscopy Optical Microscope for Metallography #12;Optical Microscope: OriginsOptical

La Rosa, Andres H.

465

An optical fan for light beams for high-precision optical measurements and optical switching  

E-Print Network [OSTI]

The polarization and orbital angular momentum properties of light are of great importance in optical science and technology in the fields of high precision optical measurements and high capacity and high speed optical communications. Here we show, a totally new method, based on a combination of these two properties and using the thermal dispersion and electro-optical effect of birefringent crystals, the construction of a simple and robust scheme to rotate a light beam like a fan. Using a computer-based digital image processing technique, we determine the temperature and the thermal dispersion difference of the crystal with high resolution. We also use the rotation phenomenon to realize thermo-optic and electro-optic switches. The basic operating principles for measurement and switching processes are presented in detail. The methods developed here will have wide practical applicability in various fields, including remote sensing, materials science and optical communication networks.

Zhou, Zhi-Yuan; Ding, Dong-Sheng; Jiang, Yun-Kun; Zhang, Wei; Shi, Shuai; Shi, Bao-Sen; Guo, Guang-Can

2014-01-01T23:59:59.000Z

466

An optical fan for light beams for high-precision optical measurements and optical switching  

E-Print Network [OSTI]

The polarization and orbital angular momentum properties of light are of great importance in optical science and technology in the fields of high precision optical measurements and high capacity and high speed optical communications. Here we show, a totally new method, based on a combination of these two properties and using the thermal dispersion and electro-optical effect of birefringent crystals, the construction of a simple and robust scheme to rotate a light beam like a fan. Using a computer-based digital image processing technique, we determine the temperature and the thermal dispersion difference of the crystal with high resolution. We also use the rotation phenomenon to realize thermo-optic and electro-optic switches. The basic operating principles for measurement and switching processes are presented in detail. The methods developed here will have wide practical applicability in various fields, including remote sensing, materials science and optical communication networks.

Zhi-Yuan Zhou; Yan Li; Dong-Sheng Ding; Yun-Kun Jiang; Wei Zhang; Shuai Shi; Bao-Sen Shi; Guang-Can Guo

2014-05-08T23:59:59.000Z

467

A Ubiquitous Optical Microsystem Platform with Application to Optical Metrology and Chemical Sensing  

E-Print Network [OSTI]

sensor platform for optical metrology and chemical sensing.Platform with Application to Optical Metrology and ChemicalPlatform with Application to Optical Metrology and Chemical

Gerling, John

2012-01-01T23:59:59.000Z

468

Double common-path interferometer for flexible optical probe of optical coherence tomography  

E-Print Network [OSTI]

J. Fujimoto, Optical coherence tomography, Science 254(D. E. N. Davies, Optical coherence-domain reflectometry: afiber common-path optical coherence tomography: sensitivity

Park, Jae Seok; Chen, Zhongping; Jeong, Myung Yung; Kim, Chang-Seok

2012-01-01T23:59:59.000Z

469

Fiber optic geophysical sensors  

DOE Patents [OSTI]

A fiber optic geophysical sensor is described in which laser light is passed through a sensor interferometer in contact with a geophysical event, and a reference interferometer not in contact with the geophysical event but in the same general environment as the sensor interferometer. In one embodiment, a single tunable laser provides the laser light. In another embodiment, separate tunable lasers are used for the sensor and reference interferometers. The invention can find such uses as monitoring for earthquakes, and the weighing of objects. 2 figures.

Homuth, E.F.

1991-03-19T23:59:59.000Z

470

Integrated optical XY coupler  

DOE Patents [OSTI]

An integrated optical XY coupler having two converging input waveguide arms meeting in a central section and a central output waveguide arm and two diverging flanking output waveguide arms emanating from the central section. In-phase light from the input arms constructively interferes in the central section to produce a single mode output in the central output arm with the rest of the light being collected in the flanking output arms. Crosstalk between devices on a substrate is minimized by this collection of the out-of-phase light by the flanking output arms of the XY coupler. 9 figs.

Vawter, G.A.; Hadley, G.R.

1997-05-06T23:59:59.000Z

471

Integrated optical XY coupler  

DOE Patents [OSTI]

An integrated optical XY coupler having two converging input waveguide arms meeting in a central section and a central output waveguide arm and two diverging flanking output waveguide arms emanating from the central section. In-phase light from the input arms constructively interfers in the central section to produce a single mode output in the central output arm with the rest of the light being collected in the flanking output arms. Crosstalk between devices on a substrate is minimized by this collection of the out-of-phase light by the flanking output arms of the XY coupler.

Vawter, G. Allen (Albuquerque, NM); Hadley, G. Ronald (Albuquerque, NM)

1997-01-01T23:59:59.000Z

472

Spatial optic multiplexer/diplexer  

DOE Patents [OSTI]

An apparatus for simultaneous transmission of optic signals having different wavelengths over a single optic fiber. Multiple light signals are transmitted through optic fibers that are formed into a circumference surrounding a central core fiber. The multiple light signals are directed by a lens into a single receiving fiber where the light combines and is then focused into the central core fiber which transmits the light to a wavelength discriminating receiver assembly.

Tremblay, Paul L. (Idaho Falls, ID)

1991-01-01T23:59:59.000Z

473

Optical Tweezer Arrays and Optical Substrates Created with Diffractive Optics Eric R. Dufresne and David G. Grier  

E-Print Network [OSTI]

Optical Tweezer Arrays and Optical Substrates Created with Diffractive Optics Eric R. Dufresne)) We describe a simple method for creating multiple optical tweezers from a single laser beam using diffractive optical elements. As a demonstration of this technique, we have implemented a 4 ? 4 square array

Grier, David

474

Optical Tweezer Arrays and Optical Substrates Created with Di#ractive Optics Eric R. Dufresne and David G. Grier  

E-Print Network [OSTI]

Optical Tweezer Arrays and Optical Substrates Created with Di#ractive Optics Eric R. Dufresne)) We describe a simple method for creating multiple optical tweezers from a single laser beam using di#ractive optical elements. As a demonstration of this technique, we have implemented a 4 ? 4 square array

Grier, David

475

High Temperature Optical Gas Sensing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optical Gas Sensing Optical Gas Sensing Opportunity Research is active on optical sensors integrated with advanced sensing materials for high temperature embedded gas sensing applications. Patent applications have been filed for two inventions in this area and several other methods are currently under development. These technologies are available for licensing and/or further collaborative research from the U.S. Department of Energy's National Energy Technology Laboratory (NETL). Organizations or individuals with capabilities in optical sensor packaging for harsh environment and high temperature applications are encouraged to contact NETL to explore potential collaborative opportunities. Overview Contact NETL Technology Transfer Group techtransfer@netl.doe.gov

476

Optical Airborne Particle Counter Operation  

Science Journals Connector (OSTI)

For most cleanroom airborne particle measurements, an optical single particle ... or surrogates of the product or of the cleanroom environment. The last procedure is used to...

Alvin Lieberman

1992-01-01T23:59:59.000Z

477

Optically stimulated differential impedance spectroscopy  

DOE Patents [OSTI]

Methods and apparatuses for evaluating a material are described. Embodiments typically involve use of an impedance measurement sensor to measure the impedance of a sample of the material under at least two different states of illumination. The states of illumination may include (a) substantially no optical stimulation, (b) substantial optical stimulation, (c) optical stimulation at a first wavelength of light, (d) optical stimulation at a second wavelength of light, (e) a first level of light intensity, and (f) a second level of light intensity. Typically a difference in impedance between the impedance of the sample at the two states of illumination is measured to determine a characteristic of the material.

Maxey, Lonnie C; Parks, II, James E; Lewis, Sr., Samuel A; Partridge, Jr., William P

2014-02-18T23:59:59.000Z

478

Optical imaging of Rydberg atoms .  

E-Print Network [OSTI]

??We present an experiment exploring electromagnetically induced transparency (EIT) in Rydberg atoms in order to observe optical nonlinearities at the single photon level. ??Rb atoms (more)

Mazurenko, Anton

2012-01-01T23:59:59.000Z

479

Phase correlations and optical coherence  

Science Journals Connector (OSTI)

We examine the properties of the recently introduced degrees of coherence regarding the phase correlations of the optical field. It is seen that some of these quantities are...

Tervo, Jani; Setl, Tero; Friberg, Ari T

2012-01-01T23:59:59.000Z

480

Efficiencies of Quantum Optical Detectors  

E-Print Network [OSTI]

We propose a definition for the efficiency that can be universally applied to all classes of quantum optical detectors. This definition is based on the maximum amount of optical loss that a physically plausible device can experience while still replicating the properties of a given detector. We prove that detector efficiency cannot be increased using linear optical processing. That is, given a set of detectors, as well as arbitrary linear optical elements and ancillary light sources, it is impossible to construct detection devices that would exhibit higher efficiencies than the initial set.

Daniel Hogg; Dominic W. Berry; A. I. Lvovsky

2014-12-15T23:59:59.000Z

Note: This page contains sample records for the topic "microresistivity log optical" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Sandia National Laboratories: Optics Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engine Test Facility Central Receiver Test Facility Power Towers for Utilities Solar Furnace Dish Test Facility Optics Lab Parabolic Dishes Work For Others (WFO) User...

482

Optical oxygen concentration monitor  

DOE Patents [OSTI]

A system for measuring and monitoring the concentration of oxygen uses as a light source an argon discharge lamp, which inherently emits light with a spectral line that is close to one of oxygen`s A-band absorption lines. In a preferred embodiment, the argon line is split into sets of components of shorter and longer wavelengths by a magnetic field of approximately 2,000 Gauss that is parallel to the light propagation from the lamp. The longer wavelength components are centered on an absorption line of oxygen and thus readily absorbed, and the shorter wavelength components are moved away from that line and minimally absorbed. A polarization modulator alternately selects the set of the longer wavelength, or upshifted, components or the set of the shorter wavelength, or downshifted, components and passes the selected set to an environment of interest. After transmission over a path through that environment, the transmitted optical flux of the argon line varies as a result of the differential absorption. The system then determines the concentration of oxygen in the environment based on the changes in the transmitted optical flux between the two sets of components. In alternative embodiments modulation is achieved by selectively reversing the polarity of the magnetic field or by selectively supplying the magnetic field to either the emitting plasma of the lamp or the environment of interest. 4 figs.

Kebabian, P.

1997-07-22T23:59:59.000Z

483

Optical oxygen concentration monitor  

DOE Patents [OSTI]

A system for measuring and monitoring the concentration of oxygen uses as a light source an argon discharge lamp, which inherently emits light with a spectral line that is close to one of oxygen's A-band absorption lines. In a preferred embodiment, the argon line is split into sets of components of shorter and longer wavelengths by a magnetic field of approximately 2000 Gauss that is parallel to the light propagation from the lamp. The longer wavelength components are centered on an absorption line of oxygen and thus readily absorbed, and the shorter wavelength components are moved away from that line and minimally absorbed. A polarization modulator alternately selects the set of the longer wavelength, or upshifted, components or the set of the shorter wavelength, or downshifted, components and passes the selected set to an environment of interest. After transmission over a path through that environment, the transmitted optical flux of the argon line varies as a result of the differential absorption. The system then determines the concentration of oxygen in the environment based on the changes in the transmitted optical flux between the two sets of components. In alternative embodiments modulation is achieved by selectively reversing the polarity of the magnetic field or by selectively supplying the magnetic field to either the emitting plasma of the lamp or the environment of interest.

Kebabian, Paul (Acton, MA)

1997-01-01T23:59:59.000Z

484

Optical transcutaneous bilirubin detector  

DOE Patents [OSTI]

This invention consists of a transcutaneous bilirubin detector comprising a source of light having spectral components absorbable and not absorbable by bilirubin, a handle assembly, electronic circuitry and a fiber optic bundle connecting the assembly to the light source and circuitry. Inside the assembly is a prism that receives the light from one end of the fiber optic bundle and directs it onto the skin and directs the reflected light back into the bundle. The other end of the bundle is trifucated, with one end going to the light source and the other two ends going to circuitry that determines how much light of each kind has been reflected. A relatively greater amount absorbed by the skin from the portion of the spectrum absorbable by bilirubin may indicate the presence of the illness. Preferably, two measurements are made, one on the kneecap and one on the forehead, and compared to determine the presence of bilirubin. To reduce the impact of light absorption by hemoglobin in the blood carried by the skin, pressure is applied with a plunger and spring in the handle assembly, the pressure limited by points of a button slidably carried in the assembly that are perceived by touch when the pressure applied is sufficient.

Kronberg, J.W.

1991-03-04T23:59:59.000Z

485

X-ray optics for scanning fluorescence microscopy and other applications  

SciTech Connect (OSTI)

Scanning x-ray fluorescence microscopy is analogous to scanning electron microscopy. Maps of chemical element distribution are produced by scanning with a very small x-ray beam. Goal is to perform such scanning microscopy with resolution in the range of <1 to 10 {mu}m, using standard laboratory x-ray tubes. We are investigating mirror optics in the Kirkpatrick-Baez (K-B) configuration. K-B optics uses two curved mirrors mounted orthogonally along the optical axis. The first mirror provides vertical focus, the second mirror provides horizontal focus. We have used two types of mirrors: synthetic multilayers and crystals. Multilayer mirrors are used with lower energy radiation such as Cu K{alpha}. At higher energies such as Ag K{alpha}, silicon wafers are used in order to increase the incidence angles and thereby the photon collection efficiency. In order to increase the surface area of multilayers which reflects x-rays at the Bragg angle, we have designed mirrors with the spacing between layers graded along the optic axis in order to compensate for the changing angle of incidence. Likewise, to achieve a large reflecting surface with silicon, the wafers are placed on a specially designed lever arm which is bent into a log spiral by applying force at one end. In this way, the same diffracting angle is maintained over the entire surface of the wafer, providing a large solid angle for photon collection.

Ryon, R.W. [Lawrence Livermore National Lab., CA (United States); Warburton, W.K. [X-Ray Instrumentation Associates, Menlo Park, CA (United States)

1992-05-01T23:59:59.000Z

486

Optical cavity furnace for semiconductor wafer processing  

DOE Patents [OSTI]

An optical cavity furnace 10 having multiple optical energy sources 12 associated with an optical cavity 18 of the furnace. The multiple optical energy sources 12 may be lamps or other devices suitable for producing an appropriate level of optical energy. The optical cavity furnace 10 may also include one or more reflectors 14 and one or more walls 16 associated with the optical energy sources 12 such that the reflectors 14 and walls 16 define the optical cavity 18. The walls 16 may have any desired configuration or shape to enhance operation of the furnace as an optical cavity 18. The optical energy sources 12 may be positioned at any location with respect to the reflectors 14 and walls defining the optical cavity. The optical cavity furnace 10 may further include a semiconductor wafer transport system 22 for transporting one or more semiconductor wafers 20 through the optical cavity.

Sopori, Bhushan L.

2014-08-05T23:59:59.000Z

487

CHARACTERISATION OF SEMICONDUCTOR OPTICAL AMPLIFIERS FOR ALL-OPTICAL REGENERATION  

E-Print Network [OSTI]

electrical pumping, broad spectral range and opportunities for integration and mass production. Among these components, the semiconductor optical amplifier (SOA) with gain saturation, low optical and electrical power Various SOAs from Alcatel-Thales III-V lab were characterized in the framework of the French project FUTUR

Paris-Sud XI, Université de

488

University Student Centers' RSO Advisor Handbook: Revision Log 2/7/14 `Activities & Programs Office' has changed to `Student Involvement Office' (all pages)  

E-Print Network [OSTI]

University Student Centers' RSO Advisor Handbook: Revision Log 2/7/14 ­ `Activities & Programs can be accessed online at www.udel.edu/usc/pdf/ AdvisorHandbook.pdf Bringing Insight & Guidance to have an advisor from among the full-time faculty or full-time exempt staff. LINKS All underlined text

Firestone, Jeremy

489

Combined simulation and inversion of SP and resistivity logs for the estimation of connate-water resistivity and Archie's cementation exponent  

E-Print Network [OSTI]

Combined simulation and inversion of SP and resistivity logs for the estimation of connate and water injection/steam flooding has been applied to enhance production. Fluid samples tak- en by fluid developed using a resistor net- work Segesman, 1962 , where dipole layers were simulated using voltage

Torres-Verdín, Carlos

490

COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.1.2.3 Capability to Log Diagnostics  

E-Print Network [OSTI]

COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.1.2.3 Capability to Log Diagnostics. Brownsberger 2-13-01 The Center for Astrophysics and Space Astronomy Reviewed: Approved: COS DCE BOOT FSW v1 Astronomy Initial Release COS DCE BOOT FSW v1.09 Component Test Results Requirement 5.1.2.3 Capability

Colorado at Boulder, University of

491

COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.1.2.3 Capability to Log Diagnostics  

E-Print Network [OSTI]

COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.1.2.3 Capability to Log Diagnostics. Brownsberger 2-13-01 The Center for Astrophysics and Space Astronomy Reviewed: Approved: COS DCE BOOT FSW v1 Astronomy Initial Release COS DCE BOOT FSW v1.13 Component Test Results Requirement 5.1.2.3 Capability

Colorado at Boulder, University of

492

A GIS-LIKE TRAINING ALGORITHM FOR LOG-LINEAR MODELS WITH HIDDEN Georg Heigold, Thomas Deselaers, Ralf Schluter, and Hermann Ney  

E-Print Network [OSTI]

A GIS-LIKE TRAINING ALGORITHM FOR LOG-LINEAR MODELS WITH HIDDEN VARIABLES Georg Heigold, Thomas with Generalized Iterative Scal- ing (GIS). GIS offers, upon others, the immediate advantages that it is locally convergent, completely parameter free, and guarantees an improvement of the criterion in each step. GIS

Deselaers, Thomas

493

Quantum Optical Version of Classical Optical Transformations and Beyond  

E-Print Network [OSTI]

By the newly developed technique of integration within an ordered product (IWOP) of operators, we explore quantum optical version of classical optical transformations such as optical Fresnel transform, Hankel transform, fractional Fourier transform, Wigner transform, wavelet transform and Fresnel-Hadmard combinatorial transform etc. In this way one may gain benefit for developing classical optics theory from the research in quantum optics, or vice-versa. We can not only find some new quantum mechanical unitary operators which correspond to the known optical transformations, deriving a new theorem for calculating quantum tomogram of density operators, but also can reveal some new classical optical transformations. We derive GFO's normal product form and its canonical coherent state representation and find that GFO is the loyal representation of symplectic group multiplication rule. We show that GFT is just the transformation matrix element of GFO in the coordinate representation such that two successive GFTs is still a GFT. The ABCD rule of the Gaussian beam propagation is directly demonstrated in the context of quantum optics. Especially, the introduction of quantum mechanical entangled state representations opens up a new area to finding new classical optical transformations. The complex wavelet transform and the condition of mother wavelet are studied in the context of quantum optics too. Throughout our discussions, the coherent state, the entangled state representation of the two-mode squeezing operators and the IWOP technique are fully used. All these confirms Dirac's assertion: " ... for a quantum dynamic system that has a classical analogue, unitary transformation in the quantum theory is the analogue of contact transformation in the classical theory".

Hong-yi Fan; Li-yun Hu

2010-10-03T23:59:59.000Z

494

Optical forces and optical torques on various materials arising from optical lattices in the Lorentz-Mie regime  

E-Print Network [OSTI]

By combining the Maxwell stress tensor with the finite-difference time-domain (FDTD) method, we calculate the optical force and optical torque on particles from optical lattices. We compare our method to the two-component ...

Jia, Lin

495

Semiconductor-based optical refrigerator  

DOE Patents [OSTI]

Optical refrigerators using semiconductor material as a cooling medium, with layers of material in close proximity to the cooling medium that carries away heat from the cooling material and preventing radiation trapping. In addition to the use of semiconducting material, the invention can be used with ytterbium-doped glass optical refrigerators.

Epstein, Richard I. (Santa Fe, NM); Edwards, Bradley C. (Nekoosa, WI); Sheik-Bahae, Mansoor (Albuquerque, NM)

2002-01-01T23:59:59.000Z

496

Bi-stable optical actuator  

DOE Patents [OSTI]

The present invention is a bi-stable optical actuator device that is depowered in both stable positions. A bearing is used to transfer motion and smoothly transition from one state to another. The optical actuator device may be maintained in a stable position either by gravity or a restraining device.

Holdener, Fred R. (Tracy, CA); Boyd, Robert D. (Livermore, CA)

2000-01-01T23:59:59.000Z

497

New Types of Optical Glass  

Science Journals Connector (OSTI)

... IN view of the interest shown in new optical glasses recently produced in Great Britain and in the United States, we wish to summarize ... probable lines of development. Advances in lens design have led to a demand for new glasses with optical properties different from those available hitherto as outlined in a recent paper by ...

W. M. HAMPTON; R. E. BASTICK; W. N. WHEAT

1944-03-04T23:59:59.000Z

498

Optical Signal Processing in All-Optical Packet Routing Systems S. J. Ben Yoo  

E-Print Network [OSTI]

Optical Signal Processing in All-Optical Packet Routing Systems S. J. Ben Yoo Department@ece.ucdavis.edu, Abstract: This paper discusses important signal processing functions in all-optical packet routing systems. We will pay special attention to all-optical time-to-live, optical performance monitoring, optical

Kolner, Brian H.

499

Optical Approach to Gravitational Redshift  

E-Print Network [OSTI]

An optical approach begins by interpreting the gravitational redshift resulting to a change in the relative velocity of light due to the medium of propagation in the gravitational field. The discussion continues by pointing out an agreement in structure between the equation for rays in geometrical optics and the geodesic equation of general relativity. From their comparison we learn that the path of rays should be given by the relation $ds^2=n^2(r)dr^2+r^2d\\theta^2$, not by $ds^2=dr^2+r^2d\\theta^2$, in a medium with spherical symmetry of refractive index $n(r)$. The development of an optical analogy suggests introducing $n^2(r)$ in place of $g_{rr}$ as an optical version of the Schwarzschild metric. In form and content, $n^2(r)$ is different from $g_{rr}$. The optical point of view replaces the general-relativity explanations in terms of time and gravitation.

Y. G. Yi

2012-04-12T23:59:59.000Z

500

Size distributions of fly ash using Coulter Multisizer: Use of multiple orifices and fitting to truncated log-normal distributions  

SciTech Connect (OSTI)

Fly ash particles, which are predominantly spherical and glassy, are produced by melting of the mineral inclusions in the coal during combustion. Particle diameters can range from sub-micrometer (micron or {mu}m) to greater than 100 {mu}m. The size distribution of fly ash is needed to determine its role in the radiation transfer process in pulverized coal combustors. The Coulter Multisizer is an useful instrument for sizing powders with a broad size distribution. A single Multisizer orifice can size particles only within a specific size range limited at the lower end to a few percent of orifice diameter by sensitivity and at the upper end by increasing non-linearity of the signal-volume relation. A scheme for combining data obtained using orifices of different diameters is described. The manufacturers state that the smallest particle which can be sized accurately is nominally 2% of the diameter of the orifice. However, it was found that the data for particles less than 4% of the orifice diameter were not reliable. In order to use the smaller orifices, the larger particles have to be removed from the sample. A wet-sieving apparatus, designed for accurate separation of the particles by size, is described. A log-normal distribution function, truncated outside the measurement limits, fits the size distribution data well. Size parameters for fly ashes of six representative US coals are presented.

Ghosal, S.; Ebert, J.L.; Self, S.A.

1991-11-01T23:59:59.000Z