Powered by Deep Web Technologies
Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Micro Hydro-Diesel Hybrid Power System  

E-Print Network [OSTI]

This paper presents the design and analysis of Neuro-Fuzzy controller based on Adaptive Neuro-Fuzzy Inference System (ANFIS) architecture for Load frequency control of an isolated wind-micro hydro-diesel hybrid power system, to regulate the frequency deviation and power deviations. Due to the sudden load changes and intermittent wind power, large frequency fluctuation problem can occur. This newly developed control strategy combines the advantage of neural networks and fuzzy inference system and has simple structure that is easy to implement. So, in order to keep system performance near its optimum, it is desirable to track the operating conditions and use updated parameters to control the system. Simulations of the proposed ANFIS based Neuro-Fuzzy controller in an isolated wind-micro hydro-diesel hybrid power system with different load disturbances are performed. Also, a conventional proportional Integral (PI) controller and a fuzzy logic (FL) controller were designed separately to control the same hybrid power system for the performance comparison. The performance of the proposed controller is verified from simulations and comparisons. Simulation results show that the performance of the proposed ANFIS based Neuro-Fuzzy Controller damps out the frequency deviation and attains the steady state value with less settling time. The proposed ANFIS based Neuro-Fuzzy controller provides best control performance over a wide range of operating conditions.

Dhanalakshmi R; Palaniswami S

2

Variable speed drive as an alternative solution for a micro-hydro power plant.  

E-Print Network [OSTI]

?? This diploma work is mainly focused on developing the control strategy for avariable speed drive as an alternative solution to a micro-hydro power plant.… (more)

Akhtar, Malik Usman

2012-01-01T23:59:59.000Z

3

Micro Hydro Power: Promising Solution for Off-grid Renewable Energy Source  

E-Print Network [OSTI]

Abstract — Micro hydro current power plant studies to date have aimed at finding feasible solution of its realistic implementation to the different parts of the world.This paper will briefly review the micro hydro current power plant?s prospect as a possible off grid source of renewable energy.

Md Tanbhir Hoq; Nawshad U. A; Md. N. Islam; Md. K. Syfullah; Raiyan Rahman

4

A test case for implementing feedback control in a micro hydro power plant.  

E-Print Network [OSTI]

??Micro-hydro turbines generate power for small villages and industries in Afghanistan. They usually produce less than 100 kW of power. Currently the flow into the… (more)

Suliman, Ahmad

2010-01-01T23:59:59.000Z

5

Frequency Control Of Micro Hydro Power Plant Using Electronic Load Controller  

E-Print Network [OSTI]

Water turbines, like petrol or diesel engines, will vary in speed as load is applied or relieved. Although not such a great problem with machinery which uses direct shaft power, this speed variation will seriously affect both frequency and voltage output from a generator. Traditionally, complex hydraulic or mechanical speed governors altered flow as the load varied, but more recently an electronic load controller (ELC) has been developed which has increased the simplicity and reliability of modern micro-hydro sets. An ELC is a solid-state electronic device designed to regulate output power of a micro-hydropower system and maintaining a near-constant load on the turbine generates stable voltage and frequency. In this paper an ELC constantly senses and regulates the generated frequency. The frequency is directly proportional to the speed of the turbine.

unknown authors

6

Department for International Development, UK. BEST PRACTICES FOR SUSTAINABLE DEVELOPMENT OF MICRO HYDRO POWER IN DEVELOPING COUNTRIES FINAL SYNTHESIS REPORT  

E-Print Network [OSTI]

and The World Bank March 2000Front page photograph of micro hydro penstock in Peru (ITDG E3 Peru X4.007).TABLE OF CONTENTS Sources and Acknowledgements...........................................................................................vii Executive Summary................................................................................................................ix Abbreviations and Acronyms...............................................................................................xiii

Contract R; Smail Khennas; Andrew Barnett; In Association

7

An experimental study of improvement of a micro hydro turbine performance.  

E-Print Network [OSTI]

??The thesis includes a literature survey of small hydraulic turbines, incorporating a historical review. The possible role of "micro hydros" in generating power in various… (more)

Yassi, Yousef

1999-01-01T23:59:59.000Z

8

Quidi Vidi Lake Hydro Power Demonstration Project  

E-Print Network [OSTI]

walking trail Comprised of a micro hydro generator a wind turbine and a solar array, metered and interpreted This presentation describes the preliminary work on the micro hydro component of the installation interests in using existing infrastructure for low impact micro hydro generation. Insurmountable Roadblocks

Bruneau, Steve

9

North West Hydro Resource Model Research to identify potential capacity and assist NW hydro power development  

E-Print Network [OSTI]

North West Hydro Resource Model Research to identify potential capacity and assist NW hydro power University wide research, aims to develop a system to promote the exploitation of hydro power in North with regard to hydro schemes Reviewing and re-formulating ill defined requirements for environmental

Meju, Max

10

Technical Specifications of Micro-Hydropower System Design and Implementation : Feasibility Analysis and Design of Lamaya Khola Micro-Hydro Power Plant.  

E-Print Network [OSTI]

??The purpose of this thesis is to first conduct a literature review regarding the technical specifications and design parametres required to design a working Micro… (more)

Kunwor, Anil

2012-01-01T23:59:59.000Z

11

Implementation of a low-cost smart grid device to prevent brownouts in village micro-hydro systems.  

E-Print Network [OSTI]

??Brownouts are a common problem in micro-hydro mini-grid systems due to the limited supply of power and the difficulty of restricting usage. The GridShare is… (more)

Quetchenbach, Thomas

2011-01-01T23:59:59.000Z

12

HEITSCH, R OMISCH --HYDRO-STORAGE SUBPROBLEMS IN POWER GENERATION 1 Hydro-Storage Subproblems in Power Generation  

E-Print Network [OSTI]

HEITSCH, R ¨OMISCH -- HYDRO-STORAGE SUBPROBLEMS IN POWER GENERATION 1 Hydro-Storage Subproblems that owns a hydro-thermal generation sys- tem and trades on the power market often lead to complex stochas- tic optimization problems. We present a new approach to solving stochastic hydro-storage subproblems

Römisch, Werner

13

Stochastic Co-optimization for Hydro-Electric Power Generation  

E-Print Network [OSTI]

1 Stochastic Co-optimization for Hydro-Electric Power Generation Shi-Jie Deng, Senior Member, IEEE the optimal scheduling problem faced by a hydro-electric power producer that simultaneously participates in multiple markets. Specifically, the hydro-generator participates in both the electricity spot market

14

Forestry Commission Wales Guidance on rental levels for Hydro Power  

E-Print Network [OSTI]

initiated a process to facilitate the development of small- scale hydro-electricity schemes on land ownedForestry Commission Wales Guidance on rental levels for Hydro Power Guidance on rental levels for hydro power projects Tel: 02920 475961 Email: hydrowales@forestry.gsi.gov.uk Version 1.0 Mike Pitcher 17

15

POWER SCHEDULING IN A HYDRO-THERMAL SYSTEM UNDER UNCERTAINTY  

E-Print Network [OSTI]

POWER SCHEDULING IN A HYDRO-THERMAL SYSTEM UNDER UNCERTAINTY C.C. Car e1, M.P. Nowak2, W. Romisch2 Forschungsgemeinschaft. leads to a tremendous increase in the complex- ity of the traditional power optimization mod- els-burning) thermal units, pumped-storage hydro plants and delivery con- tracts and describe an optimization model

Römisch, Werner

16

Optimal sequencing site of hydro-power stations  

SciTech Connect (OSTI)

At the first stage of a hydro-power survey of a river, it is important to select the optimal hydro-power site. The most important condition to be satisfied is to determine the optimal site where the greatest and most economical amount of hydro-energy can be obtained. This paper proposes a new method in which the optimal arrangement of the hydro-power stations is determined by a computational operation using discrete data at points along the river such as the drainage area, altitude, and distance along the river channel as obtained from topographical maps instead of drawing on engineers` experiences and the intuitions of experts. The results by this method are then compared with data on existing hydro-power stations and the results planned by expert engineers to show that this new computational method is superior.

Hayashi, T.; Yoshino, F.; Waka, R. [Tottori Univ., Koyama (Japan). Dept. of Mechanical Engineering

1995-06-01T23:59:59.000Z

17

Intelligent Voltage and Reactive Power Control of Mini-Hydro Power Stations for Maximisation of Real  

E-Print Network [OSTI]

1 Intelligent Voltage and Reactive Power Control of Mini-Hydro Power Stations for Maximisation Control (APFC) modes. The ability to export active and reactive power from mini-hydro power generators electrical power generation from renewable resources. Additionally, the potential early retiral of central

Harrison, Gareth

18

Micro Hydro Kinetic Turbines from Smart Hydro Power | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's HeatMexico: Energy Resources JumpMicrel Inc Jump to: navigation, search

19

Experimental optimization of a free vortex propeller runner for micro hydro application  

SciTech Connect (OSTI)

The turbine technology for low head application in the micro hydro range has been vastly neglected despite niche available in scattered regions of valley flows as well as in wastewater canals and other energy recovery schemes, where the available head does not exceed 2 meters. The goal of this study is to develop hydraulically optimized propeller turbines for the micro hydro range with a particular focus on ease of manufacture. This paper presents a wide range of geometrical optimization steps carried out on a propeller runner, whose blades have been designed using the free vortex theory, and operating with a gross head from 1.5 to 2 m and discharge of approximately 75 l/s. It further illustrates 3 stages of geometrical modifications carried out on the runner with an objective of optimizing the runner performance. These modifications comprised of changes to the tip angles (both at the runner inlet and exit) as well as the hub angles (at the runner inlet) of the runner blades. The paper also presents an interesting theoretical methodology to analyze the effects of each optimization stage. This method looks at the relative changes to shaft power and discharge at constant head and speed and gives wonderful insight as to how the internal parameters like Euler shaft work and runner hydraulic losses are behaving with respect to each optimization stage. It was found that the performance of the runner was very sensitive to changes to exit tip angle. At two levels of modification, the discharge increased in the range of 15-30%, while shaft power increased in the range of 12-45%, thus influencing the efficiency characteristics. The results of the runner inlet tip modification were very interesting in that a very significant rise of turbine efficiency was recorded from 55% to 74% at the best efficiency point, which was caused by a reduced discharge consumption as well as a higher power generation. It was also found that the optimization study on a propeller runner has reasonably validated the estimates of the free vortex theory despite small deviations. The final runner configuration demonstrated a maximum efficiency of 74% ({+-}1.8%), which is very encouraging from the perspectives of micro hydro application. The paper concludes with recommendations of a series of optimization steps to increase the efficiency of the runner. It also recommends the attempt of Computational Fluid Dynamics both as a validation and optimization tool for future research on propeller runners. (author)

Singh, Punit; Nestmann, Franz [Institute for Water and River Basin Management (IWG), University of Karlsruhe, Kaiser Str. 12, D 76128 Karlsruhe (Germany)

2009-09-15T23:59:59.000Z

20

Hard and soft probe - medium interactions in a 3D hydro+micro approach at RHIC  

E-Print Network [OSTI]

We utilize a 3D hybrid hydro+micro model for a comprehensive and consistent description of soft and hard particle production in ultra-relativistic heavy-ion collisions at RHIC. In the soft sector we focus on the dynamics of (multi-)strange baryons, where a clear strangeness dependence of their collision rates and freeze-out is observed. In the hard sector we study the radiative energy loss of hard partons in a soft medium in the multiple soft scattering approximation. While the nuclear suppression factor $R_{AA}$ does not reflect the high quality of the medium description (except in a reduced systematic uncertainty in extracting the quenching power of the medium), the hydrodynamical model also allows to study different centralities and in particular the angular variation of $R_{AA}$ with respect to the reaction plane, allowing for a controlled variation of the in-medium path-length.

Bass, S A; Ruppert, J; Nonaka, C

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

An Integrated Approach for Optimal Coordination of Wind Power and Hydro Pumping Storage  

E-Print Network [OSTI]

1 An Integrated Approach for Optimal Coordination of Wind Power and Hydro Pumping Storage Edgardo D of the integrated system. Keywords: wind power, generation dispatch, pumped storage, hydro generation, deterministic is the active power delivered by the wind-hydro plant, during interval i; PHi is the active power produced

Paris-Sud XI, Université de

22

ROOT LOCUS TECHNIQUE 323 7.6.1 Hydro Power Plant Experiment  

E-Print Network [OSTI]

ROOT LOCUS TECHNIQUE 323 7.6.1 Hydro Power Plant Experiment The design of a static controller for a real hydro power plant is considered in Skatariâ?? c and Gajiâ?? c (1992). The hydro power plant is treated variables of this hydro power plant are represented by x T = [1` 1! 1u f 1/ d 1/ q 1/ f 1/D 1/Q ] where 1

Gajic, Zoran

23

Hierarchical Control Strategy for a Hybrid Hydro-mechanical Transmission (HMT) Power-Train  

E-Print Network [OSTI]

Hierarchical Control Strategy for a Hybrid Hydro-mechanical Transmission (HMT) Power-Train Kai Loon a Hydro-mechanical Transmission (HMT) or power-split archi- tecture is being developed as a testbed within hybrid powertrain has a hydro- mechanical transmission (HMT) or power-split architecture. This combines

Li, Perry Y.

24

14 IEEE power & energy magazine july/august 2008 THE CONTRIBUTION OF HYDRO-  

E-Print Network [OSTI]

14 IEEE power & energy magazine july/august 2008 T THE CONTRIBUTION OF HYDRO- power to modern%, with these differences reflecting respective economic devel- opment. Hydro contributes 17% of the total world electricity hand, the interna- tional antidam lobby demands that major hydro developments be stopped altogether

Dixon, Juan

25

PRIMAL AND DUAL METHODS FOR UNIT COMMITMENT IN A HYDRO-THERMAL POWER SYSTEM  

E-Print Network [OSTI]

PRIMAL AND DUAL METHODS FOR UNIT COMMITMENT IN A HYDRO-THERMAL POWER SYSTEM R. Gollmer1 , A. Moller comprising thermal and pumped-storage hydro units a large-scale mixed-integer optimization model is developed aims at the cost optimal scheduling of on/o decisions and output levels for generating units. The power

Römisch, Werner

26

Design of Micro-grid System Based on Renewable Power Generation Units  

E-Print Network [OSTI]

Abstract- Micro-grid system is currently a conceptual solution to fulfill the commitment of reliable power delivery for future power systems. Renewable power sources such as wind and hydro offer the best potential for emission free power for future micro-grid systems. This paper presents a micro-grid system based on wind and hydro power sources and addresses issues related to operation, control, and stability of the system. The micro-grid system investigated in this paper represents a case study in Newfoundland, Canada. It consists of a small hydro generation unit and a wind farm that contains nine variable- speed, double-fed induction generator based wind turbines. Using Matlab/Simulink, the system is modeled and simulated to identify the technical issues involved in the operation of a micro-grid system based on renewable power generation units. The operational modes, technical challenges and a brief outline of conceptual approaches to addressing some of the technical issues are presented for further investigation.

Dr. K. Ravich; M. Manasa; Mr. P. Yohan Babu; G. V. P. Anjaneyulu

27

Cumulative Effects of Micro-Hydro Development on the Fisheries of the Swan River Drainage, Montana, First Annual Progress Report (Covering Field Season July-November 1982).  

SciTech Connect (OSTI)

This fisheries study is to determine the potential cumulative biological and economic effects of 20 small or micro-hydro-electric facilities (less than 5 megawatts) proposed to be constructed on tributaries to the Swan River, a 1738 square kilometer (671 square mile) drainage located in northwestern Montana. The study addresses portions of measure 1204 (b) (2) of the Norwthwest Power Planning Council's Columbia River Basin Fish and Wildlife Program. Aerial pre-surveys conducted during 1982 identified 102 stream reaches that may support fish populations in the Swan drainage between Swan and Lindbergh lakes. These reaches were located in 49 tributary streams and constituted 416 kilometers (258 miles) of potential fish habitat. Construction of all proposed small hydro projects would divert water from 54 kilometers (34 miles) or about 13 percent of the tributary system. Only two of the 20 proposed hydro sites did not support trout populations and most were populated by migratory bull trout and westslope cutthroat trout. Potential cumulative habitat losses that could result from dewatering of all proposed project areas were predicted using a stream reach classification scheme involving stream gradient, drainage ara, and fish population data. Preliminary results of this worst case analysis indicate that 23, 19 and 6 percent of the high quality rearing habitat for cutthroat, bull, and brook trout respectively would be lost.

Leathe, Stephen A.; Graham, Patrick J.

1984-03-01T23:59:59.000Z

28

Hydro: A Hybrid Routing Protocol for Low-Power and Lossy Networks  

E-Print Network [OSTI]

1 Hydro: A Hybrid Routing Protocol for Low-Power and Lossy Networks Stephen Dawson-based traffic, or optimize for point-to-point traffic in a homogeneous network. As these networks become more by the resource constraints of low-power and lossy networks (L2Ns). Our design leverages the predominantly two

California at Berkeley, University of

29

EIS-0141: Washington Water Power/B.C. Hydro Transmission Interconnection Project  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy developed this statement to evaluate the environmental impacts of constructing and operating a double-circuit 230-kilovolt electrical transmission line that would link the electrical systems of the Washington Water Power Company and the British Columbia Hydro and Power Authority.

30

Hydrogen Resource Assessment: Hydrogen Potential from Coal, Natural Gas, Nuclear, and Hydro Power  

SciTech Connect (OSTI)

This paper estimates the quantity of hydrogen that could be produced from coal, natural gas, nuclear, and hydro power by county in the United States. The study estimates that more than 72 million tonnes of hydrogen can be produced from coal, natural gas, nuclear, and hydro power per year in the country (considering only 30% of their total annual production). The United States consumed about 396 million tonnes of gasoline in 2007; therefore, the report suggests the amount of hydrogen from these sources could displace about 80% of this consumption.

Milbrandt, A.; Mann, M.

2009-02-01T23:59:59.000Z

31

Micro-hydropower: status and prospects IT Power Limited, The Manor House, Chineham Court, Luytens Close, Chineham, Hants, UK  

E-Print Network [OSTI]

, Luytens Close, Chineham, Hants, UK Abstract: Hydropower on a small scale, or micro-hydro, is one productivity and lifetime. Hydropower on a small-scale, or micro-hydro, is the exploitation of a river's hydro. 1.1 Small-scale hydro Hydropower has various degrees of `smallness'. To date there is still

Kammen, Daniel M.

32

A model for dynamic chance constraints in hydro power reservoir management  

E-Print Network [OSTI]

A model for dynamic chance constraints in hydro power reservoir management L. Andrieu , R. Henrion In this paper, a model for (joint) dynamic chance constraints is proposed and ap- plied to an optimization for two and three stages. 1 Introduction A conventional optimization problem under chance constraints

Römisch, Werner

33

Totara Valley micro-hydro development : a thesis presented in partial fulfillment of the requirements for the degree of Master of Applied Science in Renewable Energy Engineering, Massey University, Palmerston North, New Zealand.  

E-Print Network [OSTI]

??This study focuses on the design, construction and operation of a distributed generation system based on micro-hydro technology. The project is sited in the Totara… (more)

Donnelly, David Ronald

2008-01-01T23:59:59.000Z

34

Special Application Thermoelectric Micro Isotope Power Sources  

SciTech Connect (OSTI)

Promising design concepts for milliwatt (mW) size micro isotope power sources (MIPS) are being sought for use in various space and terrestrial applications, including a multitude of future NASA scientific missions and a range of military applications. To date, the radioisotope power sources (RPS) used on various space and terrestrial programs have provided power levels ranging from one-half to several hundred watts. In recent years, the increased use of smaller spacecraft and planned new scientific space missions by NASA, special terrestrial and military applications suggest the need for lower power, including mW level, radioisotope power sources. These power sources have the potential to enable such applications as long-lived meteorological or seismological stations distributed across planetary surfaces, surface probes, deep space micro-spacecraft and sub-satellites, terrestrial sensors, transmitters, and micro-electromechanical systems. The power requirements are in the range of 1 mW to several hundred mW. The primary technical requirements for space applications are long life, high reliability, high specific power, and high power density, and those for some special military uses are very high power density, specific power, reliability, low radiological induced degradation, and very low radiation leakage. Thermoelectric conversion is of particular interest because of its technological maturity and proven reliability. This paper summarizes the thermoelectric, thermal, and radioisotope heat source designs and presents the corresponding performance for a number of mW size thermoelectric micro isotope power sources.

Heshmatpour, Ben; Lieberman, Al; Khayat, Mo; Leanna, Andrew; Dobry, Ted [Teledyne Energy Systems, Incorporated, 10707 Gilroy Road, Hunt Valley, MD 21031 (United States)

2008-01-21T23:59:59.000Z

35

Nevada: Kingston Creek Hydro Project Powers 100 Households  

Broader source: Energy.gov [DOE]

Hydropower project produces enough electricity to annually power nearly 100 typical American households.

36

Nevada: Kingston Creek Hydro Project Powers 100 Households |...  

Energy Savers [EERE]

in Nevada: Extracting Heat From the Earth to Generate Sustainable Power Geothermal Energy Growth Continues, Industry Survey Reports Project Overview Positive Impact...

37

DESIGN OF SELF-TUNING FUZZY CONTROLLER FOR MICRO HYDROPOWER PLANSTS ON IRRIGATION DAMS.  

E-Print Network [OSTI]

??Micro hydro power plants are stand alone renewable energy sources and free from emission of green house gases. It is an appropriate choice for rural… (more)

Hayato, Jemal

2011-01-01T23:59:59.000Z

38

PP-22 British Columbia Hydro and Power Authority, Amendment 1967 |  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010Energy6 Frontera Generation Limited

39

PP-54 Ontario Hydro Electric Power Commission | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010Energy6 Frontera Generation Limited15 Trico3 Maine268-3134

40

Hydro Capital Asset Manager  

Broader source: Energy.gov [DOE]

This position is located in Federal Hydro Projects, Generation Asset Management, Power Services. Additional vacancies may be filled through this vacancy announcement or if they become available.

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

IEEE Transaction on Power Apparatus and Systems, Vol. PAS-103, No. 12, December 1984 EFFICIENT LARGE-SCALE HYDRO SYSTEM SCHEDULING WITH FORCED SPILL CONDITIONS  

E-Print Network [OSTI]

releases from each reservoir and through each power house so as to optimize the total benefit of the hydroIEEE Transaction on Power Apparatus and Systems, Vol. PAS-103, No. 12, December 1984 EFFICIENT LARGE-SCALE HYDRO SYSTEM SCHEDULING WITH FORCED SPILL CONDITIONS Yoshiro Ikura George Gross Systems

Gross, George

42

Optimization of the Performance of Micro Hydro-Turbines for Electricity Generation .  

E-Print Network [OSTI]

??Rural electrification has long been the most important topic on the development agenda of many countries. The needs for power supplies to rural areas increased… (more)

Yassen, Saeed Rajab

2014-01-01T23:59:59.000Z

43

Negotiating river ecosystems: Impact assessment and conflict mediation in the cases of hydro-power construction  

SciTech Connect (OSTI)

In this paper we discuss how the legitimacy of the impact assessment process is a key issue in conflict mediation in environmental impact assessment. We contrast two EIA cases in hydro-power generation plans made for the Ii River, Finland in different decades, and evaluate how impact assessment in these cases has contributed to the creation, mediation and resolution of conflicts. We focus on the elements of distributional and procedural justice that made the former EIA process more legitimate and consensual and the latter more conflictual. The results indicate that it is crucial for conflict mediation to include all the values and interests of the parties in the goal-setting process and in the definition and assessment of alternatives. The analysis also indicates that procedural justice is the most important to help the people and groups involved to accept the legitimacy of the impact assessment process: how different parties and their values and interests are recognized, and how participation and distribution of power are organized in an impact assessment process. It is confirmed in this article that SIA may act as a mediator or a forum providing a process through which competing knowledge claims, various values and interests can be discussed and linked to the proposed alternatives and interventions.

Karjalainen, Timo P., E-mail: timopauli.karjalainen@oulu.f [Thule Institute, University of Oulu, P.O. Box 7300, FI-90014 University of Oulu (Finland); Jaervikoski, Timo, E-mail: timo.jarvikoski@oulu.f [Unit of Sociology, University of Oulu, P.O. Box 2000, FI-90014 University of Oulu (Finland)

2010-09-15T23:59:59.000Z

44

Microsoft PowerPoint - Vicksburg District Federal Power Projects...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Federal Power Projects Vicksburg District Federal Power Projects Blakely Mountain Hydro DeGray Hydro DeGray Hydro Narrows Hydro Blakely Mountain Rewind Unit 1 ll Rotor...

45

Resource Management Services: Water Regulation, Part 605: Applications for Diversion or Use of Water for Purposes Other Than Hydro-Electric Power Projects (New York)  

Broader source: Energy.gov [DOE]

These rules apply to all applications for a license or a permit to take, divert, appropriate or otherwise use the waters of the State, except applications for hydro-electric power projects....

46

A thermally efficient micro-reactor for thermophotovoltaic power generation  

E-Print Network [OSTI]

Hydrocarbon fuels exhibit very high energy densities, and micro-generators converting the stored chemical energy into electrical power are interesting alternatives to batteries in certain applications. The increasing demands ...

Nielsen, Ole Mattis, 1977-

2006-01-01T23:59:59.000Z

47

Catalog of DC Appliances and Power Systems  

E-Print Network [OSTI]

>95% grid-integrated), 3% micro-hydro, and 2% micro-wind. InIn addition to solar, micro-hydro and wind, we also provide

Garbesi, Karina

2012-01-01T23:59:59.000Z

48

Self-powered wireless sensor system using MEMS piezoelectric micro power generator (PMPG)  

E-Print Network [OSTI]

A thin-film lead zirconate titanate, Pb(Zr,Ti)03, MEMS Piezoelectric Micro Power Generator (PMPG) has been integrated with a commercial wireless sensor node (Telos), to demonstrate a self-powered RF temperature sensor ...

Xia, YuXin, M.B.A. Sloan School of Management.

2006-01-01T23:59:59.000Z

49

SeaMicro Volume Server Power Reduction  

Broader source: Energy.gov [DOE]

Fact sheet about saving 75% of computing energy through an inter-connected array of low-power central processing units

50

Main Canal, Maverick County Water Control and Improvement District above Central Power and Light hydro-electric plant, at Maverick and Kinney Counties, Texas  

E-Print Network [OSTI]

BAIN CANAL NA~ICK COUNTY WATW CONTROL AND INPROllZXBZ DISTRICT ABOVE C~ POWER AND LION HYDRO ELECTRIC PLANT& AT, SIAVERICK AND KINNEY COUNT'S, T~~S By John J. Ledbetter, Jr. Approved as to style and content by: (Che man Committee Heed of pa... ment or Student Advisor May l952 MAIN CANAL RIA~ICK C01E1TY EATER CONTROL AND INPROVZGiWZ DISTRICT ABOVE G~ F01' AND LIGHT HYDRO-ELECTRIC PLANT, AT MAVERICK AND KINNEY GGKJZIES ~ TEXAS By John J. Ledbetter, Jr, A Thesis Submitted...

Ledbetter, John J

2012-06-07T23:59:59.000Z

51

A Practical Theory of Micro-Solar Power Sensor Networks JAEIN JEONG, Cisco Systems  

E-Print Network [OSTI]

9 A Practical Theory of Micro-Solar Power Sensor Networks JAEIN JEONG, Cisco Systems DAVID CULLER Reference Format: Jeong, J. and Culler, D. 2012. A practical theory of micro-solar power sensor networks planning for micro-solar power sensor networks" in Proceedings of the 7th International Conference

California at Berkeley, University of

52

RICE UNIVERSITY Micro Power Management of Active 802.11 Network Interfaces  

E-Print Network [OSTI]

RICE UNIVERSITY Micro Power Management of Active 802.11 Network Interfaces by Jiayang Liu A THESIS.11 Network Interfaces by Jiayang Liu Micro power management (µPM), a standard-complaint MAC level solution AND COMPUTER ENGINEERING HOUSTON, TEXAS NOVEMBER 2008 #12;II ABSTRACT Micro Power Management of Active 802

Zhong, Lin

53

Retail Beamed Power for a Micro Renewable Energy Architecture: Survey Narayanan Komerath, Girish Chowdhary  

E-Print Network [OSTI]

energy systems; space power grid; millimeter wave; power beaming, rural India power I. INTRODUCTIONRetail Beamed Power for a Micro Renewable Energy Architecture: Survey Narayanan Komerath, Girish plants, rural distribution points, UAVs, stratospheric airship platforms or space satellites. The paper

54

Micro Cooling, Heating, and Power (Micro-CHP) and Bio-Fuel Center, Mississippi State University  

SciTech Connect (OSTI)

Initially, most micro-CHP systems will likely be designed as constant-power output or base-load systems. This implies that at some point the power requirement will not be met, or that the requirement will be exceeded. Realistically, both cases will occur within a 24-hour period. For example, in the United States, the base electrical load for the average home is approximately 2 kW while the peak electrical demand is slightly over 4 kW. If a 3 kWe micro- CHP system were installed in this situation, part of the time more energy will be provided than could be used and for a portion of the time more energy will be required than could be provided. Jalalzadeh-Azar [6] investigated this situation and presented a comparison of electrical- and thermal-load-following CHP systems. In his investigation he included in a parametric analysis addressing the influence of the subsystem efficiencies on the total primary energy consumption as well as an economic analysis of these systems. He found that an increase in the efficiencies of the on-site power generation and electrical equipment reduced the total monthly import of electricity. A methodology for calculating performance characteristics of different micro-CHP system components will be introduced in this article. Thermodynamic cycles are used to model each individual prime mover. The prime movers modeled in this article are a spark-ignition internal combustion engine (Otto cycle) and a diesel engine (Diesel cycle). Calculations for heat exchanger, absorption chiller, and boiler modeling are also presented. The individual component models are then linked together to calculate total system performance values. Performance characteristics that will be observed for each system include maximum fuel flow rate, total monthly fuel consumption, and system energy (electrical, thermal, and total) efficiencies. Also, whether or not both the required electrical and thermal loads can sufficiently be accounted for within the system specifications is observed. Case study data for various micro-CHP system configurations have been discussed and compared. Comparisons are made of the different prime mover/fuel combinations. Also, micro- CHP monthly energy cost results are compared for each system configuration to conventional monthly utility costs for equivalent monthly building power, heating, and cooling requirements.

Louay Chamra

2008-09-26T23:59:59.000Z

55

INTEGRATED MICRO FUEL CELL POWER SUPPLY Andr D. Taylor and Levi T. Thompson  

E-Print Network [OSTI]

. Microfabricated micro-fuel cells hold promise for being highly efficient with low cost. Several approaches haveINTEGRATED MICRO FUEL CELL POWER SUPPLY André D. Taylor and Levi T. Thompson University of Michigan Ann Arbor, Michigan 48109-2136 ABSTRACT An integrated thin film micro fuel cell power supply design

Haller, Gary L.

56

Self-Powered Nanosystems DOI: 10.1002/anie.201201656  

E-Print Network [OSTI]

for Self- Powered Micro-/Nanosystems Zhong Lin Wang* and Wenzhuo Wu Angewandte Chemie Keywords: energy energy resources, such as solar energy,[2] geothermal power,[3] biomass/biofuel,[4] and hydro- gen energy, and biofuels. The first target is to power sensors[6] and micro-/nanosystems (MNSs).[7] This Review focuses

Wang, Zhong L.

57

Design and Analysis of Micro-Solar Power Systems for Wireless Sensor Networks  

E-Print Network [OSTI]

Design and Analysis of Micro-Solar Power Systems for Wireless Sensor Networks Jaein Jeong, Xiaofan,fxjiang,culler}@eecs.berkeley.edu Abstract-- Wireless Sensor Networks are fundamentally limited by their energy storage resources and the power they obtain from their environment. Several micro-solar powered designs have been developed

Culler, David E.

58

PP-369 British Columbia Hydro and Power Authority | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010Energy6 Frontera Generation Limited15 Trico Electric26

59

Portland Company to Receive $1.3 Million to Improve Hydro Power  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010Energy6Department of EnergyEnergyDepartment

60

A Silicon-Based Micro Gas Turbine Engine for Power Generation  

E-Print Network [OSTI]

This paper reports on our research in developing a micro power generation system based on gas turbine engine and piezoelectric converter. The micro gas turbine engine consists of a micro combustor, a turbine and a centrifugal compressor. Comprehensive simulation has been implemented to optimal the component design. We have successfully demonstrated a silicon-based micro combustor, which consists of seven layers of silicon structures. A hairpin-shaped design is applied to the fuel/air recirculation channel. The micro combustor can sustain a stable combustion with an exit temperature as high as 1600 K. We have also successfully developed a micro turbine device, which is equipped with enhanced micro air-bearings and driven by compressed air. A rotation speed of 15,000 rpm has been demonstrated during lab test. In this paper, we will introduce our research results major in the development of micro combustor and micro turbine test device.

Shan, X -C; Maeda, R; Sun, Y F; Wu, M; Hua, J S

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Design and Analysis of Micro-Solar Power Systems for Wireless Sensor Networks  

E-Print Network [OSTI]

Design and Analysis of Micro-Solar Power Systems for Wireless Sensor Networks Jaein Jeong Xiaofan or to redistribute to lists, requires prior specific permission. #12;Design and Analysis of Micro-Solar Power Systems for Wireless Sensor Networks Jaein Jeong, Xiaofan Jiang and David Culler EECS Department, University

California at Berkeley, University of

62

Design and Analysis of Micro-Solar Power Systems for Wireless  

E-Print Network [OSTI]

Design and Analysis of Micro- Solar Power Systems for Wireless Sensor Networks Jaein Jeong UC Berkeley, Computer Science with Xiaofan Jiang and David Culler 11-17-2006 LGE Talk #12;2 Solar Energy in Richmond Field Station Trio Heliomote #12;3 Our Contributions · Model for micro-solar power system

California at Berkeley, University of

63

E-Print Network 3.0 - antas river hydro Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Luytens Close, Chineham, Hants, UK Summary: productivity and lifetime. Hydropower on a small-scale, or micro-hydro, is the exploitation of a river's hydro... of the water at the...

64

Stresa, Italy, 26-28 April 2006 A SILICON-BASED MICRO GAS TURBINE ENGINE FOR POWER GENERATION  

E-Print Network [OSTI]

Stresa, Italy, 26-28 April 2006 A SILICON-BASED MICRO GAS TURBINE ENGINE FOR POWER GENERATION X. C. Our research aims to develop a micro power generation systems based on micro gas turbine engine and a piezoelectric converter, as illustrated in Fig. 1 [6]. The micro gas turbine engine is composed of a centrifugal

Paris-Sud XI, Université de

65

2/1/2014 Tinywindmills mayone daypower cell phones | INDIAN POWER SECTOR http://indianpowersector.com/home/2014/01/tiny-windmills-may-one-day-power-cell-phones/ 1/8  

E-Print Network [OSTI]

Electricity Regulation RGGVY National Solar Mission R-APDRP Power Plant Thermal Power Plant Hydro Power Plant and recharge smartphone batteries. The micro-windmill is so small that 10 such windmills could be mounted, would generate the electricity that could be collected by the cell phone's battery." Figure 1: A micro

Chiao, Jung-Chih

66

2/1/2014 Micro-Windmills Could Power Cell Phones Without Outlets | PopVulture Entertainment Network http://www.popvltr.com/2014/01/micro-windmills-could-power-cell-phones.html 1/3  

E-Print Network [OSTI]

2/1/2014 Micro-Windmills Could Power Cell Phones Without Outlets | PopVulture Entertainment Network;2/1/2014 Micro-Windmills Could Power Cell Phones Without Outlets | PopVulture Entertainment Network http http://www.popvltr.com/2014/01/micro-windmills-could-power-cell-phones.html 1/3 3 weeks ago [http

Chiao, Jung-Chih

67

A Guidebook on Grid Interconnection and Islanded Operation of Mini-Grid Power Systems Up to 200 kW  

E-Print Network [OSTI]

systems, such as ponds for micro-hydro systems or stockpilescontinued to rely on the micro-hydro system. This madeif the water flow to a micro-hydro generator is interrupted.

Greacen, Chris

2014-01-01T23:59:59.000Z

68

Anforderungen an den Energie-und Leistungsumsatz der POWER TO GAS-Einheit im MICRO GRID eines industriellen Produktionsstandortes  

E-Print Network [OSTI]

Anforderungen an den Energie- und Leistungsumsatz der POWER TO GAS- Einheit im MICRO GRID eines MICRO GRID angeschlossenen elektrischen Energiespeicher und eine ,,POWER TO GAS" -Anlage kompensiert werden. Die ,,POWER TO GAS"­ Anlage entnimmt dem MICRO GRID überschüssige elektrische Energie zur

Paderborn, Universität

69

Cumulative Effects of Micro-Hydro Development on the Fisheries of the Swan River Drainage, Montana, Volume II, Technical Information, 1983-1984 Final Report.  

SciTech Connect (OSTI)

This report summarizes a study to determine the potential cumulative effects of proposed small hydro development on the fisheries of the Swan River drainage. This report contains technical information and is a support document for the main report (Leathe and Enk, 1985). Consequently, discussion of results was minimized. The sections on fish population monitoring, streambed monitoring, habitat survey comparisons, and water temperature are the only portions that were not discussed in the main report. 5 refs., 55 figs., 44 tabs.

Leathe, Stephen A.

1985-07-01T23:59:59.000Z

70

A SELF-POWERED, SELF-SUSTAINING SYSTEM-ON-CHIP (SOC) SOLUTION POWERED FROM HYBRID MICRO-FUEL CELLS  

E-Print Network [OSTI]

batteries (e.g., Li-ion, NiMH, NiCd, etc.). Therefore, integrating the battery with a power efficient system-on-ship (SOC) solution with fully integrated micro-fuel cell/thin-film lithium-ion battery hybrids. A power scheme is proposed whereby micro-fuel cells charge an in-package thin-film lithium-ion battery, which

Rincon-Mora, Gabriel A.

71

2/21/2014 Empoprise-BI: Power from micro-windmills http://empoprise-bi.blogspot.com/2014/02/power-from-micro-windmills.html 1/4  

E-Print Network [OSTI]

.solarpumps.... Buy solar powered pumping kits Experts in Solar Pumping #12;2/21/2014 Empoprise-BI: Power from micro2/21/2014 Empoprise-BI: Power from micro-windmills http://empoprise-bi.blogspot.com/2014/02/power-from-micro-windmills.html 1/4 Subscribe to Empoprise-BI (Powered by FeedBurner) Su bscribe in a reader Email subscription

Chiao, Jung-Chih

72

Phase coded, micro-power impulse radar motion sensor  

DOE Patents [OSTI]

A motion sensing, micro-power impulse radar MIR impresses on the transmitted signal, or the received pulse timing signal, one or more frequencies lower than the pulse repetition frequency, that become intermediate frequencies in a ``IF homodyne`` receiver. Thus, many advantages of classical RF receivers can be thereby be realized with ultra-wide band radar. The sensor includes a transmitter which transmits a sequence of electromagnetic pulses in response to a transmit timing signal at a nominal pulse repetition frequency. A receiver samples echoes of the sequence of electromagnetic pulses from objects within the field with controlled timing, in response to a receive timing signal, and generates a sample signal in response to the samples. A timing circuit supplies the transmit timing signal to the transmitter and supplies the receive timing signal to the receiver. The relative timing of the transmit timing signal and the receive timing signal is modulated between a first relative delay and a second relative delay at an intermediate frequency, causing the receiver to sample the echoes such that the time between transmissions of pulses in the sequence and samples by the receiver is modulated at the intermediate frequency. Modulation may be executed by modulating the pulse repetition frequency which drives the transmitter, by modulating the delay circuitry which controls the relative timing of the sample strobe, or by modulating amplitude of the transmitted pulses. The electromagnetic pulses will have a nominal center frequency related to pulse width, and the first relative delay and the second relative delay between which the timing signals are modulated, differ by less than the nominal pulse width, and preferably by about one-quarter wavelength at the nominal center frequency of the transmitted pulses. 5 figs.

McEwan, T.E.

1996-05-21T23:59:59.000Z

73

Phase coded, micro-power impulse radar motion sensor  

DOE Patents [OSTI]

A motion sensing, micro-power impulse radar MIR impresses on the transmitted signal, or the received pulse timing signal, one or more frequencies lower than the pulse repetition frequency, that become intermediate frequencies in a "IF homodyne" receiver. Thus, many advantages of classical RF receivers can be thereby be realized with ultra-wide band radar. The sensor includes a transmitter which transmits a sequence of electromagnetic pulses in response to a transmit timing signal at a nominal pulse repetition frequency. A receiver samples echoes of the sequence of electromagnetic pulses from objects within the field with controlled timing, in response to a receive timing signal, and generates a sample signal in response to the samples. A timing circuit supplies the transmit timing signal to the transmitter and supplies the receive timing signal to the receiver. The relative timing of the transmit timing signal and the receive timing signal is modulated between a first relative delay and a second relative delay at an intermediate frequency, causing the receiver to sample the echoes such that the time between transmissions of pulses in the sequence and samples by the receiver is modulated at the intermediate frequency. Modulation may be executed by modulating the pulse repetition frequency which drives the transmitter, by modulating the delay circuitry which controls the relative timing of the sample strobe, or by modulating amplitude of the transmitted pulses. The electromagnetic pulses will have a nominal center frequency related to pulse width, and the first relative delay and the second relative delay between which the timing signals are modulated, differ by less than the nominal pulse width, and preferably by about one-quarter wavelength at the nominal center frequency of the transmitted pulses.

McEwan, Thomas E. (Livermore, CA)

1996-01-01T23:59:59.000Z

74

REFORMING PROCESSES FOR MICRO COMBINED HEAT AND POWER SYSTEM BASED ON SOLID OXIDE FUEL CELL  

E-Print Network [OSTI]

REFORMING PROCESSES FOR MICRO COMBINED HEAT AND POWER SYSTEM BASED ON SOLID OXIDE FUEL CELL University Denmark ABSTRACT Solid oxide fuel cell (SOFC) is a promising technology for decentralized power be theoretically improved through integration in power cycles; the low emissions; and the pos- sibility of using

Berning, Torsten

75

EIS-0066: The Role of Bonneville Power Administration in the Pacific Northwest Power Supply System- including its Participation in a Hydro-Thermal Power Program  

Broader source: Energy.gov [DOE]

The Bonneville Power Administration (BPA) prepared this EIS to examine the environmental impacts of the Pacific Northwest Power Planning and Conservation Act, which will foster regional electric power planning in the four Northwest states, as well as increase BPA’s authority to address future power needs.

76

Understanding the Impact of Large-Scale Penetration of Micro Combined Heat & Power Technologies within Energy Systems  

E-Print Network [OSTI]

Understanding the Impact of Large-Scale Penetration of Micro Combined Heat & Power Technologies of Micro Combined Heat & Power Technologies within Energy Systems by Karen de los Ángeles Tapia for this purpose. Co-generation of electricity and heat at the residential level, known as micro

Catholic University of Chile (Universidad Católica de Chile)

77

Cumulative Effects of Micro-Hydro Development on the Fisheries of the Swan River Drainage, Montana, Volume I, Summary, 1983-1984 Final Report.  

SciTech Connect (OSTI)

This study was designed to develop and apply methods to evaluate the cumulative effects of 20 proposed small hydro projects on the fisheries resources of the Swan River drainage located in northwestern Montana. Fish population and reach classification information was used to estimate total populations of 107,000 brook trout, 65,000 cut-throat trout and 31,000 juvenile bull trout within the tributary system. Distribution, abundance, and life history of fish species in the drainage and their contribution to the sport fishery were considered in the cumulative impact analysis. Bull trout were chosen as the primary species of concern because of their extensive use of project areas, sensitivity to streambed sedimentation, and their importance to the lake and river sport fisheries. Dewatering of hydroelectric diversion zones and streambed sedimentation (resulting from forest and small hydro development) were the major impacts considered. The developer proposed to divert up to the entire streamflow during low flow months because maintenance of recommended minimum bypass flows would not allow profitable project operation. Dewatering was assumed to result in a total loss of fish production in these areas. 105 refs., 19 figs., 38 tabs.

Leathe, Stephen A.; Enk, Michael D.

1985-04-01T23:59:59.000Z

78

The effect of high penetration of wind power on primary frequency control of power systems.  

E-Print Network [OSTI]

??In this work, a power system with wind power units and hydro power units are considered. The hydro power unit and variable speed wind turbine… (more)

Motamed, Bardia

2013-01-01T23:59:59.000Z

79

Designing Micro Wind Turbines for Portable Power Generation Francois Hogan  

E-Print Network [OSTI]

to the design of a wind turbine rotor. Number of blades The number of blades does not have a significant impact on the efficiency of a wind turbine. We have chosen a two blade design because of ease of fabrication in order) (2) · This two blade micro wind turbine meets the optimal specifications to ensure good efficiency

Barthelat, Francois

80

Feasibility Assessment of Water Energy Resources of the United States for New Low Power and Small Hydro Classes of Hydroelectric Plants  

SciTech Connect (OSTI)

Water energy resource sites identified in the resource assessment study reported in Water Energy Resources of the United States with Emphasis on Low Head/Low Power Resources, DOE/ID-11111, April 2004 were evaluated to identify which could feasibly be developed using a set of feasibility criteria. The gross power potential of the sites estimated in the previous study was refined to determine the realistic hydropower potential of the sites using a set of development criteria assuming they are developed as low power (less than 1 MW) or small hydro (between 1 and 30 MW) projects. The methodologies for performing the feasibility assessment and estimating hydropower potential are described. The results for the country in terms of the number of feasible sites, their total gross power potential, and their total hydropower potential are presented. The spatial distribution of the feasible potential projects is presented on maps of the conterminous U.S. and Alaska and Hawaii. Results summaries for each of the 50 states are presented in an appendix. The results of the study are also viewable using a Virtual Hydropower Prospector geographic information system application accessible on the Internet at: http://hydropower.inl.gov/prospector.

Douglas G. Hall

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

ASSESSMENT OF MICRO HYDRO POWER POTENTIAL OF SELECTED ETHIOPIAN RIVERS- A CASE STUDY IN THE NORTH NORTHWEST.  

E-Print Network [OSTI]

??Ethiopia is a country situated in the horn of Africa with a total population of 80 million of which 85% is living in rural areas… (more)

Abebe, Tilahun

2011-01-01T23:59:59.000Z

82

Sustainability Comparison between EnDev and not-EnDev Micro-Hydro Power (MHP) in Indonesia.  

E-Print Network [OSTI]

?? The Energising Development (EnDev) initiative, for which the GIZ acts as implementing agency, promotes the supply of modern energy technologies to households and small?scale… (more)

Ranzanici, Andrea

2013-01-01T23:59:59.000Z

83

Design, Modeling, and Capacity Planning for Micro-Solar Power Sensor Jay Taneja, Jaein Jeong, David Culler  

E-Print Network [OSTI]

Design, Modeling, and Capacity Planning for Micro-Solar Power Sensor Networks Jay Taneja, Jaein, micro-solar subsystem, and network, which is de- ployed in a challenging, deep forest setting. We the network. 1 Introduction The purpose of this paper is to provide a framework for the design of micro

Culler, David E.

84

Design Of Hydel Power Plant At Mid- Pennar Reservoir  

E-Print Network [OSTI]

Micro-hydro-electric power is both an efficient and reliable form of clean source of renewable energy. It can be an excellent method of harnessing renewable energy from small rivers and streams. The micro-hydro project designed to be a run-of-river type, because it requires very little or no reservoir in order to power the turbine. The water will run straight through the turbine and back into the river or stream to use it for the other purposes. This has a minimal environmental impact on the local ecosystem. The design procedure of micro-hydro power plant was implemented practically. The choice of the turbine type depending mainly on the site head and flow rate. The turbine power and speed were directly proportional with the site head, but there were specific points for maximum turbine power and speed with the variation of the site water flow rate. The head losses in the penstock could range from 5 to 10 percent of the gross head, depending on the length of the penstock, quantity of water flow rate and its velocity. The turbine efficiency could range from 80 to 95 percent depending on the turbine type, and the generator efficiency about 90 percent. The design study showed that construction of micro-hydroelectric project was feasible in the project site and there were no major problems apparent at the design and implementation stages of the micro-hydro-electric power plant.

P. Nagendra; Dr. G. Prasanthi

85

Photo-Activated Low Temperature, Micro Fuel Cell Power Source  

SciTech Connect (OSTI)

A Key objective of this program is to identify electrodes that will make it possible to significantly reduce the operating temperature of micro-SOFC and thin film-based SOFCs. Towards this end, efforts are directed towards: (a) identifying the key rate limiting steps which limit presently utilized electrodes from performing at reduced temperatures, as well as, (b) investigating the use of optical, as opposed to thermal energy, as a means for photocatalyzing electrode reactions and enabling reduced operating temperatures. During Phase I, the following objectives were achieved: (a) assembly and testing of our unique Microprobe Thin Film Characterization System; (b) fabrication of the model cathode materials system in thin film form by both PLD and ink jet printing; and (c) the successful configuration and testing of the model materials as cathodes in electrochemical cells. A further key objective (d) to test the potential of illumination in enhancing electrode performance was also achieved.

Harry L. Tuller

2007-03-30T23:59:59.000Z

86

Recovery Act: SeaMicro Volume Server Power Reduction Research Development  

SciTech Connect (OSTI)

Cloud data centers are projected to be the fastest growing segment of the server market through 2015, according to IDC. Increasingly people and businesses rely on the Cloud to deliver digital content quickly and efficiently. Recovery Act funding from the Department of Energy has helped SeaMicro's technologies enhance the total cost of operation, performance and energy efficiency in large data center and Cloud environments. SeaMicro's innovative supercomputer fabric connects thousands of processor cores, memory, storage and input/output traffic. The company's fabric supports multiple processor instruction sets. Current systems featuring SeaMicro technology typically use one quarter the power and take one sixth the space of traditional servers with the same compute performance, yet deliver up to 12 times the bandwidth per core. Mozilla and eHarmony are two customers successfully using SeaMicro's technology. Numerous non-public customers have been successfully using the SeaMicro product in test and production facilities. As a result of the Recovery Act funding from the U.S. Department of Energy, more than 50 direct jobs were created at SeaMicro. To date, they primarily have been high-value, engineering jobs. Hardware, software and manufacturing engineering positions have been created, as well as sales and sales engineering. The positions have allowed SeaMicro to significantly accelerate engineering development and accelerate commercialization. As a result, commercialization and delivery to market are months ahead of initial schedule. Additional jobs were indirectly created through the development of the SeaMicro product. Through many years of research and hard work prior to receipt of public funding, SeaMicro was awarded 2 patents for its work. SeaMicro's product led the way for industry leaders to reconsider the market for low power servers and create new product lines. With valuable support of the U.S. Department of Energy and through SeaMicro's product, the market has been reshaped by the company's unique approach and ground breaking technology.

Gary Lauterbach

2012-03-22T23:59:59.000Z

87

Predicting the Long-Term Behavior of a Micro-Solar Power System JAEIN JEONG, Cisco Systems  

E-Print Network [OSTI]

35 Predicting the Long-Term Behavior of a Micro-Solar Power System JAEIN JEONG, Cisco Systems DAVID CULLER, University of California, Berkeley Micro-solar power system design is challenging because it must address long-term system behavior under highly variable solar energy conditions and consider a large space

California at Berkeley, University of

88

February 16-18, 2011 / Biel (Bienne), Switzerland Comparison between accelerated thermo-hydro aged wood and naturally  

E-Print Network [OSTI]

Bois 3 DEISTAF ­ University of Florence, Italy Key words: accelerated aging, micro-mechanics, thermo-hydroFebruary 16-18, 2011 / Biel (Bienne), Switzerland Comparison between accelerated thermo-hydro aged]. It has been observed that similar degradation can be found in thermo-hydro (TH) treated wood [4]. The aim

Paris-Sud XI, Université de

89

Business Case for a Micro-Combined Heat and Power Fuel Cell System in Commercial Applications  

SciTech Connect (OSTI)

Combined heat and power fuel cell systems (CHP-FCSs) provide consistent electrical power and hot water with greater efficiency and lower emissions than alternative sources. These systems can be used either as baseload, grid-connected, or as off-the-grid power sources. This report presents a business case for CHP-FCSs in the range of 5 to 50 kWe. Systems in this power range are considered micro-CHP-FCS. For this particular business case, commercial applications rather than residential or industrial are targeted. To understand the benefits of implementing a micro-CHP-FCS, the characteristics that determine their competitive advantage must first be identified. Locations with high electricity prices and low natural gas prices are ideal locations for micro-CHP-FCSs. Fortunately, these high spark spread locations are generally in the northeastern area of the United States and California where government incentives are already in place to offset the current high cost of the micro-CHP-FCSs. As a result of the inherently high efficiency of a fuel cell and their ability to use the waste heat that is generated as a CHP, they have higher efficiency. This results in lower fuel costs than comparable alternative small-scale power systems (e.g., microturbines and reciprocating engines). A variety of markets should consider micro-CHP-FCSs including those that require both heat and baseload electricity throughout the year. In addition, the reliable power of micro-CHP-FCSs could be beneficial to markets where electrical outages are especially frequent or costly. Greenhouse gas emission levels from micro-CHP-FCSs are 69 percent lower, and the human health costs are 99.9 percent lower, than those attributed to conventional coal-fired power plants. As a result, FCSs can allow a company to advertise as environmentally conscious and provide a bottom-line sales advantage. As a new technology in the early stages of adoption, micro-CHP-FCSs are currently more expensive than alternative technologies. As the technology gains a foothold in its target markets and demand increases, the costs will decline in response to improved manufacturing efficiencies, similar to trends seen with other technologies. Transparency Market Research forecasts suggest that the CHP-FCS market will grow at a compound annual growth rate of greater than 27 percent over the next 5 years. These production level increases, coupled with the expected low price of natural gas, indicate the economic payback period will move to less than 5 years over the course of the next 5 years. To better understand the benefits of micro-CHP-FCSs, The U.S. Department of Energy worked with ClearEdge Power to install fifteen 5-kWe fuel cells in the commercial markets of California and Oregon. Pacific Northwest National Laboratory is evaluating these systems in terms of economics, operations, and their environmental impact in real-world applications. As expected, the economic analysis has indicated that the high capital cost of the micro-CHP-FCSs results in a longer payback period than typically is acceptable for all but early-adopter market segments. However, a payback period of less than 3 years may be expected as increased production brings system cost down, and CHP incentives are maintained or improved.

Brooks, Kriston P.; Makhmalbaf, Atefe; Anderson, David M.; Amaya, Jodi P.; Pilli, Siva Prasad; Srivastava, Viraj; Upton, Jaki F.

2013-10-30T23:59:59.000Z

90

A comparison of ground source heat pumps and micro-combined heat and power as residential greenhouse gas reduction strategies  

E-Print Network [OSTI]

Both ground source heat pumps operating on electricity and micro-combined heat and power systems operating on fossil fuels offer potential for the reduction of green house gas emissions in comparison to the conventional ...

Guyer, Brittany (Brittany Leigh)

2009-01-01T23:59:59.000Z

91

Micro capillary pumped loop system for a cooling high power device Chin-Tsan Wang a,*, Tzong-Shyng Leu b  

E-Print Network [OSTI]

Micro capillary pumped loop system for a cooling high power device Chin-Tsan Wang a,*, Tzong-driven two-phase loop, configured on a micro capillary pumped loop (MCPL) system without an external power. The combination of micro-scale heat transfer and fluid dynamics along with high surface-to-volume ratios makes

Leu, Tzong-Shyng "Jeremy"

92

A Study of the Hydro-Mechanical Behaviour of Compacted Crushed Argillite  

E-Print Network [OSTI]

1 A Study of the Hydro-Mechanical Behaviour of Compacted Crushed Argillite C.S. Tang a, b , A and the microstruc- ture on the hydro-mechanical behaviour of the compacted crushed argillite have been in compression only reduces the inter-aggregate porosity in the stress range considered; (iii) the micro

Paris-Sud XI, Université de

93

Hydro Power (pbl/generation)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLC HistoryVeteranstoHuub van

94

Flood survival: Getting a hydro plant back on line  

SciTech Connect (OSTI)

The Remmel Dam and Hydro Plant of Arkansas Power and Light Company was flooded on May 20, 1990. This article describes the teamwork and innovation that went into restoring the powerhouse in a short amount of time.

Weatherford, C.W. (Entergy Services, Inc., Little Rock, AR (United States))

1991-12-01T23:59:59.000Z

95

Thermo-and hydro-mechanical processes along faults during rapid slip  

E-Print Network [OSTI]

Thermo- and hydro-mechanical processes along faults during rapid slip James R. Rice & Eric M micro-contacts, and (2) Thermal pressurization of fault-zone pore fluid. Both have characteristics which

Dunham, Eric M.

96

Failure in shear bands for granular materials: thermo-hydro-chemo-mechanical effects  

E-Print Network [OSTI]

Failure in shear bands for granular materials: thermo-hydro-chemo- mechanical effects M. VEVEAKIS depends on the chemical reaction characteristics and that micro-inertia due to grain translations

Paris-Sud XI, Université de

97

Cumulative Effects of Micro-Hydro Development on the Fisheries of the Swan River Drainage, Montana, Volume III, Fish and Habitat Inventory of Tributary Streams, 1983-1984 Final Report.  

SciTech Connect (OSTI)

This report summarizes a study of the fisheries of the Swan River drainage in relation to potential small hydro development. This information was collected in order to obtain a reliable basin-wide database which was used to evaluate the potential cumulative effects of a number of proposed small hydro developments on the fisheries of the drainage. For each named tributary stream there is a reach-by-reach narrative summary of general habitat characteristics, outstanding features of the stream, and fish populations and spawning use. An attempt was made to rank many of the measured parameters relative to other surveyed stream reaches in the drainage. 3 refs.

Leathe, Stephen A.

1985-03-01T23:59:59.000Z

98

A thermally self-sustained micro solid-oxide fuel-cell stack with high power density  

E-Print Network [OSTI]

A thermally self-sustained micro solid-oxide fuel-cell stack with high power density Zongping Shao1 for portable power generation1,2 . Accordingly, polymer-electrolyte direct- methanol fuel cells design challenges and cannot operate with hydrocarbon fuels of higher energy density. Solid-oxide fuel

Haile, Sossina M.

99

HydroPulse Drilling  

SciTech Connect (OSTI)

Tempress HydroPulse{trademark} tool increases overbalanced drilling rates by generating intense suction pulses at the drill bit. This report describes the operation of the tool; results of pressure drilling tests, wear tests and downhole drilling tests; and the business case for field applications. The HydroPulse{trademark} tool is designed to operate on weighted drilling mud at conventional flow rates and pressures. Pressure drilling tests confirm that the HydroPulse{trademark} tool provides 33% to 200% increased rate of penetration. Field tests demonstrated conventional rotary and mud motor drilling operations. The tool has been operated continuous for 50 hours on weighted mud in a wear test stand. This level of reliability is the threshold for commercial application. A seismic-while-drilling version of the tool was also developed and tested. This tool was used to demonstrate reverse vertical seismic profiling while drilling an inclined test well with a PDC bit. The primary applications for the HydroPulse{trademark} tool are deep onshore and offshore drilling where rate of penetration drives costs. The application of the seismic tool is vertical seismic profiling-while-drilling and look-ahead seismic imaging while drilling.

J.J. Kolle

2004-04-01T23:59:59.000Z

100

Hydro | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio:GreerHiCalifornia: Energy ResourcesPark,isHydro or hydroelectric

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Technology Choices for the PV Industry: A Comparative Life Cycle Assessment  

E-Print Network [OSTI]

electrochemical battery, or micro- hydro using a pre-infrastructure into micro-hydro powered energy storage.

Boyd, Sarah; Dornfeld, David A

2005-01-01T23:59:59.000Z

102

Microminiaturized minimally invasive intravascular micro-mechanical systems powered and controlled via fiber-optic cable  

DOE Patents [OSTI]

A micro-mechanical system for medical procedures is constructed in the basic form of a catheter having a distal end for insertion into and manipulation within a body and a near end providing for a user to control the manipulation of the distal end within the body. A fiberoptic cable is disposed within the catheter and having a distal end proximate to the distal end of the catheter and a near end for external coupling of laser light energy. A microgripper is attached to the distal end of the catheter and providing for the gripping or releasing of an object within the body. A laser-light-to-mechanical-power converter is connected to receive laser light from the distal end of the fiberoptic cable and connected to mechanically actuate the microgripper.

Fitch, Joseph P. (Livermore, CA); Hagans, Karla (Livermore, CA); Clough, Robert (Danville, CA); Matthews, Dennis L. (Moss Beach, CA); Lee, Abraham P. (Walnut Creek, CA); Krulevitch, Peter A. (Los Altos, CA); Benett, William J. (Livermore, CA); Da Silva, Luiz (Danville, CA); Celliers, Peter M. (Berkeley, CA)

1998-01-01T23:59:59.000Z

103

2/24/2014 Micro-windmills Power Portable Devices |IT News Digest, Biz Listings & Community http://www.pc-100.com/micro-windmills-power-portable-devices/ 1/5  

E-Print Network [OSTI]

://www.pc-100.com/micro-windmills-power-portable-devices/ 1/5 Tweet 0 0 Mobile Ver Contact Us Contact Us IT News-assembled from 2D metal pieces utilizing planar multilayer electroplating techniques that have been optimized Login / Register Register Log in Lost Password Search the site... Search IT News Calendar February 2014

Chiao, Jung-Chih

104

ANALYSIS AND CONTROL DESIGN OF A HYDRO-MECHANICAL HYDRAULIC HYBRID PASSENGER VEHICLE  

E-Print Network [OSTI]

for optimal engine management. The hydro-mechanical drive train splits the engine power through two pathsANALYSIS AND CONTROL DESIGN OF A HYDRO-MECHANICAL HYDRAULIC HYBRID PASSENGER VEHICLE Teck Ping, Sim Minneapolis, Minnesota 55455 Email: tpsim@me.umn.edu Perry Y. Li Center for Compact and Efficient Fluid Power

Li, Perry Y.

105

Paper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive  

E-Print Network [OSTI]

for the Center for Compact and Efficient Fluid Power at the University of Minnesota. The hydro-mechanical hybrid is leveraging the intrinsically high power density of the hydraulic energy storage system through optimal enginePaper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive Train with Independent Wheel

Li, Perry Y.

106

Power MEMS 2007, Nov. 28-29, 2007, Freiburg, Germany Fig. 1: Micro quartz combustor. (a) Schematic,  

E-Print Network [OSTI]

Power MEMS 2007, Nov. 28-29, 2007, Freiburg, Germany 265 Fig. 1: Micro quartz combustor. (a, 1.0 mm, and 1.5 mm. FLAME PROPAGATION AND QUENCHING IN ULTRA-THIN QUARTZ COMBUSTORS Yong Fan, Yuji and analysis of premixed CH4/Air flame propagation and quenching in three quartz combustors with chamber depth

Kasagi, Nobuhide

107

Self-powered micro-structured solid state neutron detector with very low leakage current and high efficiency  

E-Print Network [OSTI]

Self-powered micro-structured solid state neutron detector with very low leakage current and high helps to reduce the gammas sensitivity. The neutron detec- tion efficiency of such detectors mainly, fabrication, and performance of solid-state neutron detector based on three-dimensional honeycomb-like silicon

Danon, Yaron

108

Hydro-Mechanical Coupling in Damaged Porous Media Containing Isolated Cracks or/and Vugs: Model and Computations  

E-Print Network [OSTI]

Hydro-Mechanical Coupling in Damaged Porous Media Containing Isolated Cracks or/and Vugs: Model In this paper we present the development of the macroscopic model describing the hydro-mechanical coupling model in the micro-porous domain saturated by a fluid. In the crack/vug domain the Stokes equation

Paris-Sud XI, Université de

109

Technical Analysis of Installed Micro-Combined Heat and Power Fuel-Cell System  

SciTech Connect (OSTI)

Combined heat and power fuel cell systems (CHP-FCSs) provide consistent electrical power and hot water with greater efficiency and lower emissions than alternative sources. These systems can be used either as baseload, grid-connected, or as off-the-grid power sources. This report presents a technical analysis of 5 kWe CHP-FCSs installed in different locations in the U.S. At some sites as many as five 5 kWe system is used to provide up to 25kWe of power. Systems in this power range are considered “micro”-CHP-FCS. To better assess performance of micro-CHP-FCS and understand their benefits, the U.S. Department of Energy worked with ClearEdge Power to install fifteen 5-kWe PBI high temperature PEM fuel cells (CE5 models) in the commercial markets of California and Oregon. Pacific Northwest National Laboratory evaluated these systems in terms of their economics, operations, and technical performance. These units were monitored from September 2011 until June 2013. During this time, about 190,000 hours of data were collected and more than 17 billion data points were analyzed. Beginning in July 2013, ten of these systems were gradually replaced with ungraded systems (M5 models) containing phosphoric acid fuel cell technology. The new units were monitored until June 2014 until they went offline because ClearEdge was bought by Doosan at the time and the new manufacturer did not continue to support data collection and maintenance of these units. During these two phases, data was collected at once per second and data analysis techniques were applied to understand behavior of these systems. The results of this analysis indicate that systems installed in the second phase of this demonstration performed much better in terms of availability, consistency in generation, and reliability. The average net electrical power output increased from 4.1 to 4.9 kWe, net heat recovery from 4.7 to 5.4 kWth, and system availability improved from 94% to 95%. The average net system electric efficiency, average net heat recovery efficiency, and overall net efficiency of the system increased respectively from 33% to 36%, from 38% to 41%, and from 71% to 76%. The temperature of water sent to sit however reduced by about 16% from 51?C to 43 ?C. This was a control strategy and the temperature can be controlled depending on building heat demands. More importantly, the number of shutdowns and maintenance events required to keep the systems running at the manufacturer’s rated performance specifications were substantially reduced by about 76% (for 8 to 10 units running over a one-year period). From July 2012 to June 2013, there were eight CE5 units in operation and a total of 134 scheduled and unscheduled shutdowns took place. From July 2013 to June 2014, between two to ten units were in operation and only 32 shutdowns were reported (all unscheduled). In summary, the number of shutdowns reduced from 10 shutdowns per month on average for eight CE5units to an average of 2.7 shutdowns per month for M5 units (between two to ten units).

Brooks, Kriston P.; Makhmalbaf, Atefe

2014-10-31T23:59:59.000Z

110

Wind/Hydro Study  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun DengWISPWind Industry2 BONNEVILLEWind/Hydro

111

Fiber Optical Micro-detectors for Oxygen Sensing in Power Plants  

SciTech Connect (OSTI)

A reflection mode fiber optic oxygen sensor that can operate at high temperatures for power plant applications has been developed. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. We report on a fiber optic technique for detection of gas phase oxygen up to 100 C based on the {sup 3}O{sub 2} quenching of the luminescence from molybdenum chloride clusters, K{sub 2}Mo{sub 6}Cl{sub 14}. The inorganic sensing film is a composite of sol-gel particles embedded in a thin, oxygen permeable sol-gel binder. The particles are comprised of thermally stable, luminescent K{sub 2}Mo{sub 6}Cl{sub 14} clusters dispersed in a fully equilibrated sol-gel matrix. From 40 to 100 C, the fiber sensor switches {approx}6x in intensity in response to alternating pulses of <0.001% O2 and 21% O{sub 2} between two well defined levels with a response time of 10 s. The sensor signal is a few nW for an input pump power of 250 {micro}W. The normalized sensor signal is linear with molar oxygen concentration and fits the theoretical Stern-Volmer relationship. Although the sensitivity decreases with temperature, sensitivity at 100 C is 160 [O{sub 2}]{sup -1}. These parameters are well suited for in-situ, real-time monitoring of oxygen for industrial process control applications.

Gregory L. Baker; Ruby N. Ghosh; D. J. Osborn; Po Zhang

2006-09-30T23:59:59.000Z

112

Hydrologic Modeling with Arc Hydro Tools 1 Copyright 2007 ESRI. All rights reserved. Arc Hydro  

E-Print Network [OSTI]

Hydrologic Modeling with Arc Hydro Tools 1 Copyright © 2007 ESRI. All rights reserved. Arc Hydro Arc Hydro: GIS in Water Resources Seminar/Workshop Gainesville, Florida ­ November 15, 2007 Christine Dartiguenave, ESRI inc. cdartiguenave@esri.com #12;Hydrologic Modeling with Arc Hydro Tools 2 2Arc Hydro

Kane, Andrew S.

113

A COMPARISON OF THE AQUATIC IMPACTS OF LARGE HYDRO AND SMALL HYDRO PROJECTS  

E-Print Network [OSTI]

A COMPARISON OF THE AQUATIC IMPACTS OF LARGE HYDRO AND SMALL HYDRO PROJECTS by Lara A. Taylor, P Project: A Comparison of the Aquatic Impacts of Large Hydro and Small Hydro Projects Project No.: 501 of small hydro development in British Columbia has raised concerns surrounding the effects

114

ASSESSMENT OF MICRO HYDRO POWER POTENTIAL OF SELECTED ETHIOPIAN RIVERS- A CASE STUDY IN THE NORTH-WEST PART OF THE COUNTRY.  

E-Print Network [OSTI]

??Ethiopia is a country situated in the horn of Africa with a total population of 80 million of which 85% is living in rural areas… (more)

Abebe, Tilahun

2011-01-01T23:59:59.000Z

115

Optimization and Control of a Hydro-Mechanical Transmission based Hybrid Hydraulic Passenger Vehicle  

E-Print Network [OSTI]

Optimization and Control of a Hydro-Mechanical Transmission based Hybrid Hydraulic Passenger Vehicle Perry Y. Li Felicitas Mensing Center for Compact and Efficient Fluid Power, University of Minnesota, Minneapolis, USA ABSTRACT Hydro-mechanical transmission (HMT) based hybrid hydraulic vehicle

Li, Perry Y.

116

Ontario Hydro Motor Efficiency Study  

E-Print Network [OSTI]

Electric motors consume more than one-half of the electrical energy produced by Ontario Hydro. In the residential sector, the major motor load is for refrigerators and freezers while packaged equipment dominate the motor load in the commercial...

Dautovich, D. R.

1980-01-01T23:59:59.000Z

117

Midwest Hydro Users Group Meeting  

Broader source: Energy.gov [DOE]

The Midwest Hydro Users Group will be holding their annual Fall meeting on November 12th and 13th in Wausau, Wisconsin.  An Owners-only meeting on the afternoon of the 12th followed by a full...

118

Feasibility of Hydrogen Production from Micro Hydropower Projects in Nepal  

E-Print Network [OSTI]

The current energy crisis in Nepal clearly indicates that the future energy-demand cannot be met by traditional energy-sources. Community-based micro-hydropower operations are considered to be one of the most feasible options for energy development. However, the power plant capacity factor remains very low due to limited commercial and business opportunities. Generation of hydrogen (H2) from the unutilized power could eradicate this problem. This new energy carrier is clean, can save foreign currency and increases the energy-security. The aim of this study is to determine the potential of H2 production from excess energy of a micro-hydro project in rural Nepal using “HOMER ” from NREL.

M. S. Zaman; A. B. Chhetri; M. S. Tango

2010-01-01T23:59:59.000Z

119

Extreme hydro-meteorological events and their probabilities  

E-Print Network [OSTI]

Extreme hydro-meteorological events and their probabilities Jules Beersma #12;Promotor: Prof. dr. A Onderzoekschool (BBOS) #12;Extreme hydro-meteorological events and their probabilities Extreme hydro

Beersma, Jules

120

3rd Int'l Workshop on Micro & Nano Tech. for Power Generation & Energy Conv. (PowerMEMS'03), Makuhari, Japan, 4-5 Dec. 2003. PRELIMINARY DESIGN OF A MEMS STEAM TURBINE POWER PLANT-ON-A-CHIP  

E-Print Network [OSTI]

), Makuhari, Japan, 4-5 Dec. 2003. 1 PRELIMINARY DESIGN OF A MEMS STEAM TURBINE POWER PLANT-ON-A-CHIP Luc G-mail: lucf@alum.mit.edu ABSTRACT This paper presents the system-level and component design of a micro steam. The microfabricated device consists of a steam turbine that drives an integrated micropump and generator. Two

Frechette, Luc G.

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

"ch01" --2009/7/4 --4:33 --page 3 --#3 Thermo-and hydro-mechanical processes along faults during rapid slip  

E-Print Network [OSTI]

"ch01" -- 2009/7/4 -- 4:33 -- page 3 -- #3 Thermo- and hydro-mechanical processes along faults at highly stressed frictional micro-contacts, and (2) Thermal pressurization of fault-zone pore fluid. Both

122

Hydro-Québec Net Metering (Quebec, Canada)  

Broader source: Energy.gov [DOE]

In line with Hydro-Québec's commitment to the environment and sustainable development, Hydro-Québec is supporting self-generation with a new rate offering: the net metering option. This option...

123

Prparation de votre examen stabilit hydro  

E-Print Network [OSTI]

Préparation de votre examen stabilité hydro: - Relisez vos notes de cours - Refaites les exercices

Hoepffner, Jérôme

124

Runner upgrading: Learning from Ontario Hydro`s experience  

SciTech Connect (OSTI)

Planning, design, and implementation of turbine runner replacement at Ontario Hydro is described in the article. The use of fully homologous modeling for upgrade projects, including both francis and propeller runner types, is outlined. Confirmation of physical model efficiency is obtained through numerical modeling. Inlet connections, setting cavitation-erosion guarantees, and other guarantees included in tender documents are also described in some detail.

Kee, D.C.; Markovich, M.S.; Munro, R.I. [Ontario Hydro (Canada)

1997-02-01T23:59:59.000Z

125

A Guidebook on Grid Interconnection and Islanded Operation of Mini-Grid Power Systems Up to 200 kW  

E-Print Network [OSTI]

Induction generators for small hydro schemes,” PowerManuals/Guidelines for Small Hydro Development, Sep. 19,re.org/assets/no57.pdf Small Hydro Action for the Promotion

Greacen, Chris

2014-01-01T23:59:59.000Z

126

4, 18791891, 2007 hydro-information  

E-Print Network [OSTI]

HESSD 4, 1879­1891, 2007 WS for hydro-information systems J. Horak et al. Title Page Abstract for distributed and interoperable hydro-information systems J. Horak, A. Orlik, and J. Stromsky Institute (antonin.orlik.hgf@vsb.cz) 1879 #12;HESSD 4, 1879­1891, 2007 WS for hydro-information systems J. Horak et

Paris-Sud XI, Université de

127

851 S.W. Sixth Avenue, Suite 1100 Steve Crow 503-222-5161 Portland, Oregon 97204-1348 Executive Director 800-452-5161  

E-Print Network [OSTI]

generation power (with photovoltaic arrays, small wind turbines, micro hydro, or even combined heat power

128

A low-power pressure-and temperature-programmed separation system for a micro gas chromatograph.  

SciTech Connect (OSTI)

This thesis presents the theory, design, fabrication and testing of the microvalves and columns necessary in a pressure- and temperature-programmed micro gas chromatograph ({micro}GC). Two microcolumn designs are investigated: a bonded Si-glass column having a rectangular cross section and a vapor-deposited silicon oxynitride (Sion) column having a roughly circular cross section. Both microcolumns contain integrated heaters and sensors for rapid, controlled heating. The 3.2 cm x 3.2 cm, 3 m-long silicon-glass column, coated with a non-polar polydimethylsiloxane (PDMS) stationary phase, separates 30 volatile organic compounds (VOCs) in less than 6 min. This is the most efficient micromachined column reported to date, producing greater than 4000 plates/m. The 2.7 mm x 1.4 mm Sion column eliminates the glass sealing plate and silicon substrate using deposited dielectrics and is the lowest power and fastest GC column reported to date; it requires only 11 mW to raise the column temperature by 100 C and has a response time of 11s and natural temperature ramp rate of 580 C/min. A 1 m-long PDMS-coated Sion microcolumn separates 10 VOCs in 52s. A system-based design approach was used for both columns.

Sacks, Richard D. (University of Michigan, Ann Arbor, MI); Robinson, Alex Lockwood (Advanced Sensor Technologies, Albuquerque, NM); Lambertus, Gordon R. (University of Michigan, Ann Arbor, MI); Potkay, Joseph A. (University of Michigan, Ann Arbor, MI); Wise, Kensall D. (University of Michigan, Ann Arbor, MI)

2006-10-01T23:59:59.000Z

129

Manitoba Hydro | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429Lacey,(MonasterLowellis a town in Carroll County,Manitoba Hydro Jump to:

130

248 IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 20, NO. 1, JANUARY 2005 Micro-Grid Autonomous Operation During  

E-Print Network [OSTI]

, low-head hydro units and geothermal systems and ii) battery storage, capacitor storage, low- and high regulation. I. INTRODUCTION DISTRIBUTED generation (DG) units, distributed storage (DS) units and integrated distributed generation/storage units constitute the broader family of distributed en- ergy resources (DR

Lehn, Peter W.

131

Linkage of the ArcHydro Data Model with SWAT  

E-Print Network [OSTI]

Linkage of the ArcHydro Data Model with SWAT Francisco Olivera, Ph.D., P.E. Milver Valenzuela Texas on a hub basis. Independent of the already connected models HUB #12;Arc Hydro Arc Hydro can be used as the hub for connecting hydrologic models. #12;Arc Hydro #12;What it is and what it is not ... Arc Hydro

132

Bonneville Power Administration - 2007 Annual Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in the Pacifi c Northwest, the agency markets wholesale electrical power from 31 federal hydro projects, one nonfederal nuclear plant and several other small nonfederal power...

133

Methods and systems for micro transmissions  

DOE Patents [OSTI]

Methods and systems for micro transmissions for a micro machine may comprise an input shaft assembly coupled to a micro actuator, an output shaft assembly coupled to a micro shaft, and one or more power conversion elements operable to convert a first type of movement from the micro actuator into a second, disparate type of movement for the micro shaft.

Stalford, Harold L

2014-12-23T23:59:59.000Z

134

Subsea Pumped Hydro Storage -A Technology Assessment.  

E-Print Network [OSTI]

??A novel technology for energy storage called Subsea Pumped Hydro Storage (SPHS) has been evaluated from a techno-economical point of view. Intermittent renewable energy sources… (more)

Falk, Johan

2013-01-01T23:59:59.000Z

135

DYNAMIC MODELLING OF AUTONOMOUS POWER SYSTEMS INCLUDING RENEWABLE POWER SOURCES.  

E-Print Network [OSTI]

(thermal, gas, diesel) and renewable (hydro, wind) power units. The objective is to assess the impact - that have a special dynamic behaviour, and the wind turbines. Detailed models for each one of the power system components are developed. Emphasis is given in the representation of different hydro power plant

Paris-Sud XI, Université de

136

Reliability of materials in MEMS : residual stress and adhesion in a micro power generation system.  

SciTech Connect (OSTI)

The reliability of thin film systems is important to the continued development of microelectronic and micro-electro-mechanical systems (MEMS). The reliability of these systems is often tied to the ability of the films to remain adhered to its substrate. By measuring the amount of energy to separate the film from the substrate, researchers can predicts film lifetimes. Recent work has resulted in several different testing techniques to measure this energy including spontaneous buckling, indentation induced delamination and four point bending. This report focuses on developing quantifiable adhesion measurements for multiple thin film systems used in MEMS and other thin film systems of interest to Sandia programs. First, methods of accurately assessing interfacial toughness using stressed overlayer methods are demonstrated using both the W/Si and Au/Si systems. For systems where fracture only occurs along the interface, such as Au/Si, the calculated fracture energies between different tests are identical if the energy put into the system is kept near the needed strain energy to cause delamination. When the energy in the system is greater than needed to cause delamination, calculated adhesion energies can increase by a factor of three due to plastic deformation. Dependence of calculated adhesion energies on applied energy in the system was also shown when comparisons of four point bending and stressed overlayer test methods were completed on Pt/Si systems. The fracture energies of Pt/Ti/SiO{sub 2} were studied using four-point bending and compressive overlayers. Varying the thickness of the Ti film from 2 to 17 nm in a Pt/Ti/SiO{sub 2} system, both test methods showed an increase of adhesion energy until the nominal Ti thickness was 12nm. Then the adhesion energy began to decrease. While the trends in toughness are similar, the magnitude of the toughness values measured between the test methods is not the same, demonstrating the difficulty in extracting mode I toughness as mixed mode loading approaches mode II conditions.

Moody, Neville Reid; Kennedy, Marian S. (Washington State University, Pullman, WA); Bahr, David F. (Washington State University, Pullman, WA)

2007-09-01T23:59:59.000Z

137

FIBER OPTICAL MICRO-DETECTORS FOR OXYGEN SENSING IN POWER PLANTS  

SciTech Connect (OSTI)

A reflection mode fiber optic oxygen sensor that can operate at high temperatures for power plant applications is being developed. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. High temperature measurements of the emission of clusters in sol gel films show that the luminescence intensity from the films follow a 1/T relationship from room temperature to 150 C, and then declines at a slower rate at higher temperatures. The large number of photons available at 230 C is consistent with simple low cost optics for fiber optic probes based on the emission from clusters in sol gel films.

Gregory L. Baker; Ruby N. Ghosh; D.J. Osborn III

2004-10-01T23:59:59.000Z

138

Vortex Hydro Energy Develops Transformational Technology to Harness...  

Energy Savers [EERE]

Vortex Hydro Energy Develops Transformational Technology to Harness Energy from Water Currents Vortex Hydro Energy Develops Transformational Technology to Harness Energy from Water...

139

NOAA Fisheries Protocols For Hydro-dynamic Dredge Surveys  

E-Print Network [OSTI]

NOAA Fisheries Protocols For Hydro-dynamic Dredge Surveys: Surf Clams and Ocean Quahogs December 19..................................................................................................................................... 1 NOAA Fisheries Hydro-dynamic Clam Dredge Survey Protocols

140

PHNOMNES DITS HYDRO-LECTRIQUES ET HYDRO-MAGNTIQUES; THO-RMES FONDAMENTAUX ET LEUR CONSTATATION EXPRIMENTALE;  

E-Print Network [OSTI]

PH�NOM�NES DITS HYDRO-�LECTRIQUES ET HYDRO-MAGN�TIQUES; TH�O- R�MES FONDAMENTAUX ET LEUR nouveaux phénomènes. Je les désignerai ainsi comme une hydro-électicité, un hydro-magnétisme, etc. Mais'idée, d'aimants au lieu d'hydro-aimants, de masses électriques au lieu de masses hydro-électriques, et

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

FIBER OPTICAL MICRO-DETECTORS FOR OXYGEN SENSING IN POWER PLANTS  

SciTech Connect (OSTI)

A reflection mode fiber optic oxygen sensor that can operate at high temperatures for power plant applications is being developed. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. Alkali salts of Mo{sub 6}Cl{sub 12} were synthesized and heated to 280 C for one hour in air. Optical measurements of the thermally treated material confirm the potential of the salts as lumophores in high temperature fiber optic sensors. In addition sol-gel films containing Mo{sub 6}Cl{sub 12} were dip coated on quartz substrates and heated at 200 C for one hour. Conditions were developed for successfully immobilizing monomeric complexes that are compatible with sol-gel processing.

Gregory L. Baker; Ruby N. Ghosh; D.J. Osborn III

2004-07-01T23:59:59.000Z

142

Fiber Optical Micro-detectors for Oxygen Sensing in Power Plants  

SciTech Connect (OSTI)

A reflection mode fiber optic oxygen sensor that can operate at high temperatures for power plant applications is being developed. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. Our approach towards immobilizing the potassium salt of the molybdenum cluster, K{sub 2}Mo{sub 6}Cl{sub 14}, at the far end of an optical fiber is to embed the cluster in a thermally cured sol-gel matrix particle. Due to the improved mechanical properties of this approach high temperature sensor measurements were performed up to 100 C. These are promising results for a high temperature fiber optical oxygen sensor based on molybdenum chloride clusters.

Gregory L. Baker; Ruby N. Ghosh; D. J. Osborn; Po Zhang

2006-09-30T23:59:59.000Z

143

Fiber Optical Micro-detectors for Oxygen Sensing in Power Plants  

SciTech Connect (OSTI)

A reflection mode fiber optic oxygen sensor that can operate at high temperatures for power plant applications is being developed. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. Our approach towards immobilizing the potassium salt of the molybdenum cluster, K{sub 2}Mo{sub 6}Cl{sub 14}, at the far end of an optical fiber is to embed the cluster in a thermally cured sol-gel matrix particle. This particle-in-binder approach affords fibers with greatly improved mechanical properties, as compared to previous approaches. The sensor was characterized in 2-21% gas phase oxygen at 40, 70 and 100 C. These are promising results for a high temperature fiber optical oxygen sensor based on molybdenum chloride clusters.

Gregory L. Baker; Ruby N. Ghosh; D.J. Osborn; Po Zhang

2006-06-30T23:59:59.000Z

144

DESIGN, COSTING AND FEASIBILITYOF BUKABA MICRO-HYDRO POWERPLANT.  

E-Print Network [OSTI]

?? Rwanda is one of the world's developing countries located in southern sub-Saharan region in Africa; and one of its most pressing environmental concerns is… (more)

Maximilien, NIYONSABA

2013-01-01T23:59:59.000Z

145

CONTROLLED PART-TO-SUBSTRATE MICRO-ASSEMBLY VIA ELECTROCHEMICAL MODULATION OF SURFACE ENERGY  

E-Print Network [OSTI]

the hydro- phobicity of the binding sites between micro-parts and substrates. Active assembly sites consistCONTROLLED PART-TO-SUBSTRATE MICRO-ASSEMBLY VIA ELECTROCHEMICAL MODULATION OF SURFACE ENERGY-2500, USA ABSTRACT A process designed for repeated parallel micro- assembly has been achieved by controlling

146

FIBER OPTICAL MICRO-DETECTORS FOR OXYGEN SENSING IN POWER PLANTS  

SciTech Connect (OSTI)

A reflection mode fiber optic oxygen sensor is being developed that can operate at high temperatures for power plant applications. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. Two critical materials issues are the cluster's ability to withstand high temperatures when immobilized in a porous the sol-gel support, and whether after heating to high temperatures, the sol-gel matrix maintains a high and constant permeability to oxygen to support rapid quenching of luminescence. We used a composite materials approach to prepare stable sensing layers on optical fibers. We dispersed 60 w/w% of a pre-cured sol-gel composite containing the potassium salt of molybdenum clusters (K{sub 2}Mo{sub 6}Cl{sub 14}) into a sol-gel binder solution, and established the conditions necessary for deposition of sol-gel films on optical fibers and planar substrates. The fiber sensor has an output signal of 5 nW when pumped with an inexpensive commercial 365 nm ultraviolet light emitting diode (LED). Quenching of the sensor signal by oxygen was observed up to a gas temperature of 175 C with no degradation of the oxygen permeability of the composite after high temperature cycling. On planar substrates the cluster containing composite responds within <1 second to a gas exchange from nitrogen to oxygen, indicating the feasibility of real-time oxygen detection.

Gregory L. Baker; Ruby N. Ghosh; D.J. Osborn III; Po Zhang

2005-07-01T23:59:59.000Z

147

FIBER OPTICAL MICRO-DETECTORS FOR OXYGEN SENSING IN POWER PLANTS  

SciTech Connect (OSTI)

A reflection mode fiber optic oxygen sensor that can operate at high temperatures for power plant applications is being developed. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. One of the critical materials issues is to demonstrate that the luminescent cluster immobilized in the sol-gel porous support can withstand high temperature. At the same time the sol-gel matrix must have a high permeability to oxygen. Using a potassium salt of the molybdenum clusters, K{sub 2}Mo{sub 6}Cl{sub 14}, we have established the conditions necessary for deposition of optical quality sol-gel films. From spectroscopic measurements of the film we have shown that the cluster luminescence is stable following heat cycling of 54 hours at 200 C. Quenching of a factor of 1.5X between pure nitrogen and 21% oxygen was observed from in-situ measurements of films heated directly at 200 C. An automated system for characterizing fiber optic oxygen sensors up to 220 C with a temporal resolution better than 10 s is under construction. We estimate a signal of 6 x 10{sup 8} photons/s after complete quenching in 21% oxygen. These are promising results for a high temperature fiber optical oxygen sensor based on molybdenum chloride clusters.

Gregory L. Baker; Ruby N. Ghosh; D.J. Osborn III; Po Zhang

2005-04-01T23:59:59.000Z

148

Fiber Optical Micro-detectors for Oxygen Sensing in Power Plants  

SciTech Connect (OSTI)

A reflection mode fiber optic oxygen sensor that can operate at high temperatures for power plant applications is being developed. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. Previously we described a particle-in-binder approach to immobilizing the potassium salt of a molybdenum cluster, K{sub 2}Mo{sub 6}Cl{sub 14}, at the tips of optical fibers. Compared to previous methods, the particle-in-binder approach affords fibers with greatly improved mechanical properties. We have extensively characterized two fiber sensors at high temperature. We obtain quenching ratios between pure nitrogen and 21% oxygen as high as 3.9 x at 70 C. For the first sensor at 60 C we obtained a {+-} 1% variation in the quenching ratio over 6 cycles of measurement, and monitored the device performance over 23 days. We were able to operate the second sensor continuously for 14 hours at 70 C, and the sensor quenching ratio was stable to 5% over that time period. These are promising results for a high temperature fiber optical oxygen sensor based on molybdenum chloride clusters.

Gregory L. Baker; Ruby N. Ghosh; D.J. Osborn III; Po Zhang

2006-01-01T23:59:59.000Z

149

FIBER OPTICAL MICRO-DETECTORS FOR OXYGEN SENSING IN POWER PLANTS  

SciTech Connect (OSTI)

A reflection mode fiber optic oxygen sensor that can operate at high temperatures for power plant applications is being developed. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. The luminescence of Mo{sub 6}Cl{sub 12} immobilized in a sol-gel matrix was measured as a function of heater temperature up to 200 C, in an inert environment. While the luminescence decreased with temperature, the integrated intensity at 200 C should be sufficient to enable detection of the luminescence in a fiber geometry. Previously we found that aging Mo{sub 6}Cl{sub 12} at temperatures above 250 C converts the canary yellow Mo{sub 6}Cl{sub 12} to a non-luminescent gray solid. Optical and thermal aging experiments show that the alkali metal salts of Mo{sub 6}Cl{sub 12} have higher thermal stabilities and remain luminescent after aging at 280 C.

Gregory L. Baker; Ruby N. Ghosh; D.J. Osborn III

2004-04-01T23:59:59.000Z

150

Fiber Optical Micro-detectors for Oxygen Sensing in Power Plants  

SciTech Connect (OSTI)

A reflection mode fiber optic oxygen sensor that can operate at high temperatures for power plant applications is being developed. The sensor is based on the {sup 3}O{sub 2} quenching of the red emission from hexanuclear molybdenum chloride clusters. Previously we immobilized the potassium salt of a molybdenum cluster, K{sub 2}M{sub 6}Cl{sub 14}, in a sol-gel matrix and showed that the luminescence is stable after 54 hours at 200 C, but the quenching ratios were low and the films delaminated after thermal cycling due to densification of the matrix. Three new approaches to solve decreased quenching over time and delamination of films off fiber tips were investigated. In the first approach K{sub 2}Mo{sub 6}Cl{sub 14} embedded in cured sol-gel particles were incorporated into a TEOS based sol-gel. These gave enhanced quenching (6x), but delaminated. Our second approach was to use a commercial cyanoacrylate glue to immobilize the particles onto the tip of an optical fiber. This gave better adhesion and good quenching initially, but eventually the glue degraded upon heating. Our third approach was to use a 55% OtMOS/ TEOS sol-gel binder. Films based on this new sol-gel binder show high quenching ({approx}6x) and superior mechanical stability even after thermal cycling. Sensor measurements on an optical fiber containing K{sub 2}Mo{sub 6}Cl{sub 14} embedded in cured sol-gel particles were obtained from 100 to 25 C. The signal intensity in nitrogen was stable at 2.8 {+-} 0.2 nW, and the quenching ratio (ratio of signal in N{sub 2} vs. 21 % O{sub 2}) varied from 4.4 to 6.9X. These are promising results for a high temperature fiber optical oxygen sensor based on molybdenum chloride clusters.

Gregory L. Baker; Ruby N. Ghosh; D.J. Osborn III; Po Zhang

2005-10-01T23:59:59.000Z

151

MICRO-CAPTEURS POUR LA GESTION DURABLE DE LA QUALITE DES EAUX Namour Philippe1 *  

E-Print Network [OSTI]

1 MICRO-CAPTEURS POUR LA GESTION DURABLE DE LA QUALITE DES EAUX Namour Philippe1 * , Khadro Basma 2 besoins tant réglementaires (DCE, LEMA) que cognitifs, (exploration du fonctionnement des hydro

Boyer, Edmond

152

Microsystems Micro and Nano Technologies  

E-Print Network [OSTI]

, virtual prototyping · Microsystems reliability · Micro and nano systems for detection and actuation, nanophotonics, MOEMS and micro-optics · Power-electronics components, electrical and photovoltaic energy

Ingrand, François

153

Power MEMS 2005, Nov. 28-30, 2005, Tokyo, Japan We have developed a large-entrainment-ratio micro ejector to supply fuel-air mixture for a catalytic combustor. As the key  

E-Print Network [OSTI]

is that air- entrainment is achieved without additional air container or micro pump, and thus the systemPower MEMS 2005, Nov. 28-30, 2005, Tokyo, Japan J=132 J Abstract We have developed a large-entrainment-ratio micro ejector to supply fuel-air mixture for a catalytic combustor. As the key component of the ejector

Kasagi, Nobuhide

154

Turner Hunt Ocean Renewable (TRL 4 System) - THOR's Power Method...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications CX-004722: Categorical Exclusion Determination Vortex Hydro Energy (TRL 5 6 System) - Advanced Integration of Power Take-Off in VIVACE Water Power...

155

The characterization of flow regimes with power spectral density distributions of pressure fluctuations during condensation in smooth and micro-fin tubes  

SciTech Connect (OSTI)

This paper presents an objective predictor of the prevailing flow regime during refrigerant condensation inside smooth-, micro-fin and herringbone tubes. The power spectral density (PSD) distribution of the fluctuating condensing pressure signal was used to predict the prevailing flow regime, as opposed to the traditional (and subjective) use of visual-only methods, and/or smooth-tube flow regime maps. The prevailing flow regime was observed by using digital cameras and was validated with the use of the conventional smooth-tube flow regime transition criteria, Froude rate criteria, as well as a new flow regime map that was developed for micro-fin tube condensation. Experimental work was conducted for condensing R-22, R-407C, and R-134a at an average saturation temperature of 40{sup o}C with mass fluxes ranging from 300 to 800kg/m{sup 2}s, and with vapour qualities ranging from 0.85-0.95 at condenser inlet to 0.05-0.15 at condenser outlet. Tests were conducted with one smooth-tube condenser and three micro-fin tube condensers (with helix angles of 10{sup o}, 18{sup o}, and 37{sup o}, respectively). It is shown that the micro-fin tubes cause a delay in the transition from annular to intermittent flow by at least 19% (compared to the smooth tube), thus significantly contributing to the enhancement of heat transfer. (author)

Liebenberg, Leon; Meyer, Josua P. [Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria 0002 (South Africa)

2006-11-15T23:59:59.000Z

156

A new multidimensional AMR Hydro+Gravity Cosmological code  

E-Print Network [OSTI]

A new cosmological multidimensional hydrodynamic and N-body code based on an Adaptive Mesh Refinement scheme is described and tested. The hydro part is based on modern high-resolution shock-capturing techniques, whereas N-body approach is based on the Particle Mesh method. The code has been specifically designed for cosmological applications. Tests including shocks, strong gradients, and gravity have been considered. A cosmological test based on Santa Barbara cluster is also presented. The usefulness of the code is discussed. In particular, this powerful tool is expected to be appropriate to describe the evolution of the hot gas component located inside asymmetric cosmological structures.

Vicent Quilis

2004-05-20T23:59:59.000Z

157

Operation of a steam hydro-gasifier in a fluidized bed reactor  

E-Print Network [OSTI]

Using Self-Sustained Hydro- Gasification." [0011] In aprocess, using a steam hydro-gasification reactor (SHR) thepyrolysis and hydro-gasification in a single step. This

Park, Chan Seung; Norbeck, Joseph N.

2008-01-01T23:59:59.000Z

158

Sandia National Laboratories: Conventional Water Power: Market...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in meeting power system grid service requirements. However, the vast complex system of hydro resources warrants investigation into the opportunities for more efficiency operation,...

159

Microsoft PowerPoint - Carlsen.ppt  

Broader source: Energy.gov (indexed) [DOE]

* Pursuing balanced portfolio of renewable and low carbon options - Substantial existing hydro and pumped storage - Biomass * Mitchell conversion 2012 * Studying re-powering and...

160

Geek-Up[04.01.2011]: Charting Wind, Thermal, Hydro Generation  

Broader source: Energy.gov [DOE]

Check out Bonneville Power Administration’s new near real-time energy monitoring – it displays the output of all wind, thermal and hydro generation in the agency’s balancing authority against its load. Updated every five minutes, it’s a great resource for universities, research laboratories and other utilities.

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Capillary Forces in Micro-Fluidic Self-Assembly Andreas Greiner, Jan Lienemann, Jan G. Korvink, Xiaorong Xiong*, Yael Hanein*,  

E-Print Network [OSTI]

Capillary Forces in Micro-Fluidic Self-Assembly Andreas Greiner, Jan Lienemann, Jan G. Korvink are coated with a hydro- phobic alkanethiol layer (a self-assembled monolayer, or SAM), and a lubricant

162

Solving the Unit Commitment Problem in Power Generation by Primal and Dual Methods  

E-Print Network [OSTI]

- storage hydro plants a large-scale mixed integer optimization model for unit commitment is developed optimal scheduling of on/o decisions and output levels for generating units in a power system over on the shares of nuclear, conventional thermal, hydro and pumped-storage hydro power in the underlying

Römisch, Werner

163

Development and use of a Velocity Prediction Program to compare the effects of changes to foil arrangement on a hydro-foiling Moth dinghy  

E-Print Network [OSTI]

arrangement on a hydro-foiling Moth dinghy M W Findlay, S R Turnock, School of Engineering Sciences main reasons. Firstly, the power to weight ratio of most sailing boats is relatively small because

164

Bonneville Power Administration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

In reply refer to: PGP Ms. Renata Kurshner Manager, Generation Resource Management, BC Hydro and Power Authority 6911 Southpoint Drive, Tower 15 Burnaby, BC V3N 4X8 Dear Ms....

165

Bonneville Power Administration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

In reply refer to: PGPO Renata Kurschner Director, Generation Resource Management BC Hydro and Power Authority 691 1 Southpoint Drive, El5 Burnaby, B.C., Canada V3N 4 x 8 Dear...

166

Coupled hydro-mechanical processes in crytalline rock and in induratedand plastic clays: A comparative discussion  

E-Print Network [OSTI]

at Grimsel. In Coupled Thermo-Hydro- Mechanical-ChemicalCOUPLED HYDRO-MECHANICAL PROCESSES IN CRYTALLINE ROCK AND IN

Tsang, Chin-Fu; Blumling, Peter; Bernier, Frederic

2008-01-01T23:59:59.000Z

167

| JANUARY/FEBRUARY 2014 | Hydro INTERNATIONAL22 symbols and features used on a  

E-Print Network [OSTI]

| JANUARY/FEBRUARY 2014 | Hydro INTERNATIONAL22 symbols and features used on a nautical chart #12;Hydro INT

New Hampshire, University of

168

Transcending the Hydro-Illogical Building a Texas Hydrologic  

E-Print Network [OSTI]

Transcending the Hydro-Illogical Cycle Building a Texas Hydrologic Information System TX-HIS #12;Q to couple streamflow models to GCMs · We need to break the hydro-illogical cycle and plan for the delivery

Yang, Zong-Liang

169

1/12/14 World's Smallest "Micro" Wind Turbine Can Charge Your Smartphone & Power Your Home www.offgridworld.com/worlds-smallest-micro-wind-turbine-can-charge-your-smartphone-power-your-home/ 1/3  

E-Print Network [OSTI]

. This means the walls could generate power as well as your roof, which would be covered in solar panels. This would be a phenomenal wind/solar energy platform which could generate more than enough to power your... Subscribe Recent Posts Cave Palace Ranch: Solar Powered Cave Dwelling Is Truly A Palace! Hidden Camera

Chiao, Jung-Chih

170

HydroGen | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpen EnergyBoard"Starting a new pageHuadeHydroChinaHydroGen Jump

171

Fraser River Hydro and Fisheries Research Project fonds  

E-Print Network [OSTI]

Fraser River Hydro and Fisheries Research Project fonds Revised by Erwin Wodarczak (1998 Fraser River Hydro and Fisheries Research Project fonds. ­ 19561961. 13 cm of textual records. Administrative History The Fraser River Hydro and Fisheries Research Project was established in 1956, financed

Handy, Todd C.

172

Interconnected hydro-thermal systems Models, methods, and applications  

E-Print Network [OSTI]

Interconnected hydro-thermal systems Models, methods, and applications Magnus Hindsberger Kgs. Lyngby 2003 IMM-PHD-2003-112 Interconnected hydro-thermalsystems #12;Technical University of Denmark 45882673 reception@imm.dtu.dk www.imm.dtu.dk IMM-PHD-2003-112 ISSN 0909-3192 #12;Interconnected hydro

173

NOAA Technical Memorandum NWS HYDRO 45 RELATIONSHIP BETWEEN  

E-Print Network [OSTI]

NOAA Technical Memorandum NWS HYDRO 45 RELATIONSHIP BETWEEN STORM AND ANTECEDENT PRECIPITATION OVER TECHNICAL MEMORANDUMS National Weather Service. Office of Hydrology Series The Office of Hydrology (HYDRO and development. NOAA Technical Memorandums in the NWS HYDRO series facilitate prompt distribution of scientific

174

Atomic scale mixing for inertial confinement fusion associated hydro instabilities  

E-Print Network [OSTI]

Atomic scale mixing for inertial confinement fusion associated hydro instabilities J. Melvina, , P Alamos, NM 87545, USA Abstract Hydro instabilities have been identified as a potential cause- able. We find numerical convergence for this important quantity, in a purely hydro study, with only

New York at Stoney Brook, State University of

175

NOAA Technical Memorandum NWS HYDRO 46 A CLIMATIC ANALYSIS  

E-Print Network [OSTI]

NOAA Technical Memorandum NWS HYDRO 46 A CLIMATIC ANALYSIS OF OROGRAPHIC PRECIPITATION OVER THE BIGHydrology (HYDRO) ofthe National Weather Service (NWS) develops procedures for making river and water supply, and conducts pertinent research and development NOAA Teclmical Memorandums in the NWS HYDRO series facilitate

176

Micro- & Nano-Technologies Enabling More Compact, Lightweight...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Micro- & Nano-Technologies Enabling More Compact, Lightweight Thermoelectric Power Generation & Cooling Systems Micro- & Nano-Technologies Enabling More Compact, Lightweight...

177

Optimal electricity system planning in a large hydro jurisdiction: Will British Columbia soon become a major importer of electricity?  

E-Print Network [OSTI]

Optimal electricity system planning in a large hydro jurisdiction: Will British Columbia soon T S c Within two decades, BC will need to import substantial power to meet demand. c Operating Burrard capacity. In the absence of these measures, imported power may be more significant in BC's electricity

Pedersen, Tom

178

Micro-Raman spectroscopy of refractive index microstructures in silicone-based hydrogel  

E-Print Network [OSTI]

Micro-Raman spectroscopy of refractive index microstructures in silicone-based hydrogel polymers 26, 2009 (Doc. ID 102944); published March 3, 2009 Micro-Raman spectroscopy was used to study transparent hydro- gel polymer materials through a high (or medium) nu- merical aperture (NA) objective

Novotny, Lukas

179

Ontario Hydro`s transportation of radioactive material and emergency response plan  

SciTech Connect (OSTI)

Ontario Hydro has been transporting radioactive material for almost 30 years without any exposure to the public or release to the environment. However, there have been three accidents involving Hydro`s shipments of radioactive material. In addition to the quality packaging and shipping program, Ontario Hydro has an Emergency Response Plan and capability to deal with an accident involving a shipment of radioactive material. The Corporation`s ability to respond, to effectively control and contain the situation, site remediation, and to provide emergency public information in the event of a road accident minimizes the risk to the public and the environment. This emphasizes their commitment to worker safety, public safety and impact to the environment. Response capability is mandated under various legislation and regulations in Canada.

Karmali, N. [Ontario Hydro, Toronto, Ontario (Canada). Nuclear Operations Branch

1993-12-31T23:59:59.000Z

180

LANL hydro test update(u)  

SciTech Connect (OSTI)

Briefings presenting W78 programmatic activities for FY11 and the status and plan for associated Hydro 3617, is included wherewith in support of the NNSA W78 Program Review Meeting scheduled for January 11 thru 13, 2011, at the Savannah River Plant, SC.

Aragon, Ezekiel D [Los Alamos National Laboratory

2011-01-06T23:59:59.000Z

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

3-D hydro + cascade model at RHIC  

E-Print Network [OSTI]

We present a 3-D hydro + cascade model in which viscosity and a realistic freezeout process for the hadronic phase are taken into account. We compare our results to experimental data and discuss the finite state interaction effects on physical observables.

Chiho Nonaka; Steffen A. Bass

2005-11-07T23:59:59.000Z

182

THERMO-HYDRO-MECHANICAL SIMULATION OF GEOTHERMAL  

E-Print Network [OSTI]

THERMO-HYDRO-MECHANICAL SIMULATION OF GEOTHERMAL RESERVOIR STIMULATIONRESERVOIR STIMULATION Silvia Seminario del Grupo de Hidrologìa Subterrànea - UPC, Barcelona #12;INTRODUCTION Enhanced geothermal systems Geothermal gradient ~ 33 °C/Km Hydraulic stimulation enhances fracture permeability (energy

Politècnica de Catalunya, Universitat

183

Doctoral Defense "Thermal-hydro-mechanical model  

E-Print Network [OSTI]

Doctoral Defense "Thermal-hydro-mechanical model for freezing and thawing soils" Yao Zhang Date & Environmental Engineering Frost susceptible soils are vulnerable to frost action in seasonal freezing as well and strengthening occurs as the soils freeze, whereas settlement and thaw weakening is expected during the melting

Kamat, Vineet R.

184

hydro | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Home Water Power Forum Description: Forum

185

Optimal Power Dispatch via Multistage Stochastic Programming \\Lambda  

E-Print Network [OSTI]

are reported. 1 Introduction Mathematical models for cost­optimal power scheduling in hydro­thermal systems a short­term optimization model for the dis­ patch of electric power in a hydro­thermal generation systemOptimal Power Dispatch via Multistage Stochastic Programming \\Lambda M.P. Nowak 1 and W. R¨omisch 1

Römisch, Werner

186

A Micro-power EEG acquisition SoC with integrated seizure detection processor for continuous patient monitoring  

E-Print Network [OSTI]

Continuous on-scalp EEG monitoring provides a non-invasive means to detect the onset of seizures in epilepsy patients, but cables from the scalp pose a severe strangulation hazard during convulsions. Since the power of ...

Verma, Naveen

187

Dynamic modeling and control strategies for a micro-CSP plant with thermal storage powered by the Organic Rankine cycle  

E-Print Network [OSTI]

Organic Rankine cycle (ORC) systems are gaining ground as a means of effectively providing sustainable energy. Coupling small-scale ORCs powered by scroll expander- generators with solar thermal collectors and storage can ...

Ireland, Melissa Kara

2014-01-01T23:59:59.000Z

188

Design of a model pipeline for testing of piezoelectric micro power generator for the Trans-Alaska Pipeline System  

E-Print Network [OSTI]

In order to provide a reliable corrosion detection system for the Trans-Alaska Pipeline System (TAPS), a distributed wireless self-powered sensor array is needed to monitor the entire length of the pipeline at all times. ...

Lah, Mike M. (Mike Myoung)

2007-01-01T23:59:59.000Z

189

Reading File Bonneville Power Administration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

reply refer to: PG-5 Ms. Renata Kurschner Director, Generation Resource Management B.C. Hydro and Power Authority 691 1 Southpoint Drive, 1 5th Floor Burnaby, B.C. V3N 4 x 8 Dear...

190

Optimizing Trading Decisions for Hydro Storage Systems using ...  

E-Print Network [OSTI]

Trading with a system of hydro storage plants in a wholesale electricity market involves many decisions ...... prices due to higher demand for heating and cooling.

2012-09-19T23:59:59.000Z

191

Robust optimization based self scheduling of hydro-thermal Genco ...  

E-Print Network [OSTI]

Dec 29, 2013 ... Abstract: This paper proposes a robust optimization model for optimal self scheduling of a hydro-thermal generating company. The proposed ...

Alireza Soroudi

2013-12-29T23:59:59.000Z

192

A Hydro-Thermo-Mechanical Numerical Model For Hdr Geothermal...  

Open Energy Info (EERE)

to the most hydraulically conductive fractures in two orthogonal and vertical fracture sets. The mathematical model representing the hydro-mechanical interactions that are...

193

Microsoft Word - SNOPUD_Youngs_Cr_Hydro_CX_+_Checklist.doc  

Broader source: Energy.gov (indexed) [DOE]

Interconnection of Snohomish County Public Utility District No.1 (SNOPUD) Young's Creek Hydro Small Generation Budget Information: WO 00231295, Task 01 Categorical Exclusion...

194

Rye Patch geothermal development, hydro-chemistry of thermal...  

Open Energy Info (EERE)

development, hydro-chemistry of thermal water applied to resource definition Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Rye Patch geothermal...

195

Sustainability in Research: Geography & Planning Researcher Title Respective Activities  

E-Print Network [OSTI]

of micro-hydro power generation (very small-scale electric power generation in streams and water courses to the placement of micro-hydro power generators are how water rights and property rights affect the development

Rose, Annkatrin

196

Thermo-hydro-chemical Predictive analysis for the drift-scale predictive heater test,  

E-Print Network [OSTI]

Characterization Project Thermo-Hydro-Chemical Predictive90-1116 Berkeley, C A 94720 Thermo-Hydro-Chemical PredictiveVersion 1.0 Thermo-Hydro-Chemical Predictive Analysis for

Sonnenthal, Eric L.; Spycher, Nicolas; Apps, John; Simmons, Ardyth

1998-01-01T23:59:59.000Z

197

Operation of a steam hydro-gasifier in a fluidized bed reactor  

E-Print Network [OSTI]

OPERATION OF A S T E A M HYDRO-GASIFIER IN A FLUIDIZED BEDMaterial Using Self-Sustained Hydro- Gasification." [0011]the process, using a steam hydro-gasification reactor (SHR)

Park, Chan Seung; Norbeck, Joseph N.

2008-01-01T23:59:59.000Z

198

Optimierung eines hydro-thermischen Kraftwerks-systems unter Ungewi heit  

E-Print Network [OSTI]

Optimierung eines hydro-thermischen Kraftwerks- systems unter Ungewi heit Dr. rer. nat. N. Growe Arbeit beschreiben wir ein stochastisches Modell fur den ko- stenoptimalen Einsatz eines hydro ein, entwickeln ein Losungsverfahren und validieren dies am Beispiel des hydro

Römisch, Werner

199

Entwicklung eines Netzleitsystems fr das MICRO GRID eines industriellen Produktionsstandortes mit einem hohen Anteil  

E-Print Network [OSTI]

an das lokale MICRO GRID angeschlossenen elektrischen Energiespeicher und eine ,,POWER TO GAS" -Anlage

Paderborn, Universität

200

Voith Hydro Wavegen Limited | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformationSEDS data Jump to: navigation, search ToolVoith Hydro Wavegen

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Ascent Hydro Projects Ltd | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300AlgoilEnergyElectric Coop CorpInformation ArthurAscendantHydro Projects

202

HydroChina Corporation | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpen EnergyBoard"Starting a new pageHuadeHydroChina Corporation

203

Property:HydroSystem | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExploration Jump to:FieldProceduresFY JumpThis is a property ofHydroSystem Jump to:

204

Hydro Green Energy | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat Jump to:PhotonHolyName HousingIII WindHybrids Plus Jump to:EnergyHydro

205

HydroVolts | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat Jump to:PhotonHolyName HousingIII WindHybrids PlusHydroVolts Jump to:

206

1256 IEEE TRANSACTIONS ON POWER SYSTEMS, VOL. 18, NO. 4, NOVEMBER 2003 Short-Term Hydrothermal Generation Scheduling  

E-Print Network [OSTI]

long and mid-term models, have been used to optimize the amount of hydro energy to be used during1256 IEEE TRANSACTIONS ON POWER SYSTEMS, VOL. 18, NO. 4, NOVEMBER 2003 Short-Term Hydrothermal are obtained for each of both hydro and thermal units. Future cost curves of hydro generation, obtained from

Catholic University of Chile (Universidad Católica de Chile)

207

E-Print Network 3.0 - atmosphere-sea hydro-ecological model Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

sensitive to climate change because numerous hydro-ecological processes respond to even small changes... (see section on general hydro-ecology and 6). Even more dramatic...

208

Hydro-Thermal Scheduling (HTS) 1.0 Introduction  

E-Print Network [OSTI]

1 Hydro-Thermal Scheduling (HTS) 1.0 Introduction From an overall systems view, the single most, relative to that of thermal plants, are very small. There are three basic types of hydroelectric plants;2 Pump-storage This kind of hydro plant is a specialized reservoir-type plant which has capability to act

McCalley, James D.

209

NH4-smectite: Characterization, hydration properties and hydro mechanical behaviour  

E-Print Network [OSTI]

NH4-smectite: Characterization, hydration properties and hydro mechanical behaviour M. Gautier a and drive to environmental problems. The purpose of this study was to understand the hydro- physical changes the pressure on small amounts of samples, proved the strong increase of the permeability of NH4-smectite

Paris-Sud XI, Université de

210

EECE 493 -Winter 2012 Introduction to Power Electronics  

E-Print Network [OSTI]

DC-DC Converter Analysis (Ch. 2) Sept 17-19: the DC-Transformer Model and Component Losses (Ch. 3, 4EECE 493 - Winter 2012 Introduction to Power Electronics Instructor: Nathan Ozog Office: BC Hydro) Phone: 604 528 2639 (BC Hydro Direct Line) TA: Soroush Amini Sajjad Zadkhast Office: Power Lab - 3rd

Pulfrey, David L.

211

POWER SCHEDULING IN A HYDROTHERMAL SYSTEM UNDER UNCERTAINTY  

E-Print Network [OSTI]

POWER SCHEDULING IN A HYDRO­THERMAL SYSTEM UNDER UNCERTAINTY C.C. Carøe 1 , M.P. Nowak 2 , W. R in the complex­ ity of the traditional power optimization mod­ els. The remedy we propose is decomposition which­storage hydro plants and delivery con­ tracts and describe an optimization model for its least­cost operation

Römisch, Werner

212

Quantifying the Operational Benefits of Conventional and Advanced Pumped Storage Hydro on Reliability and Efficiency: Preprint  

SciTech Connect (OSTI)

Pumped storage hydro (PSH) plants have significant potential to provide reliability and efficiency benefits in future electric power systems with high penetrations of variable generation. New PSH technologies, such as adjustable-speed PSH, have been introduced that can also present further benefits. This paper demonstrates and quantifies some of the reliability and efficiency benefits afforded by PSH plants by utilizing the Flexible Energy Scheduling Tool for the Integration of Variable generation (FESTIV), an integrated power system operations tool that evaluates both reliability and production costs.

Krad, I.; Ela, E.; Koritarov, V.

2014-07-01T23:59:59.000Z

213

Abstract: This paper describes the on-going work done by Hydro-Qubec to optimize the settings of automatic devices  

E-Print Network [OSTI]

1 Abstract: This paper describes the on-going work done by Hydro-Québec to optimize the settings of automatic devices installed in its main power plants to maintain secure operation under extreme is installed at the Churchill Falls hydroelectric power plant (5500 MW) in Labrador. Data mining techniques

Wehenkel, Louis

214

Power Management under Uncertainty by Lagrangian Relaxation N. GroweKuska 1 ,  

E-Print Network [OSTI]

cost­optimal generation of electric power in a hydro­ thermal generation system is modeled of an electric hydro­thermal based utility under data uncertainty. More specifically, we consider a power system popular in power optimization [2], [3], [4], [5], [6], [7], [8]. Since the coupling constraints contain

Römisch, Werner

215

AD Hydro Power Ltd ADHPL | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende NewSowitec doWinvestFlumeFinal Report | Open23ACPACTANOLAD

216

Antu County Hengxin Hydro Power Development Co Ltd | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300Algoil JumpAltergyExperimentsInformation

217

Kingston Creek Hydro Project Powers 100 Households | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES7.pdfFuel2007 | Department7JanuaryWASTE-TO-ENERGY:AboutKimberly

218

Hydro Power to Make the American Dream Come True  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun withconfinement plasmasSandy-Nor'easter

219

Smart Hydro Power GmbH | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty Ltd Jump to: navigation,PvtSouth Dakota)Slovenia: EnergyFeatures >

220

Microsoft PowerPoint - Cost Estimating for Hydro Planning  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping theEnergyInnovationMichaelGE1PlanARMAqueous two-phase7Estimating

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

HydroCoil Power Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat Jump to:PhotonHolyName HousingIII WindHybrids Plus JumpAddress: 1359

222

Canonical Correlation Analysis (CCA) of GRACE, hydrological and hydro-meteorological signals  

E-Print Network [OSTI]

1 Canonical Correlation Analysis (CCA) of GRACE, hydrological and hydro-meteorological signals M. J and Hydro-meteorology Hydrology GRACE Hydro-meteorology RQ dt dS dt dMdS RETP . dt AH a #12;3 GRACE, times based signals #12;12 CCA on catchments based ­ GRACE and hydro-meteorology T GDGDGD T VUQ dt d

Stuttgart, Universität

223

Sixth Power Plan northwest Power and Conservation Council  

E-Print Network [OSTI]

's loads · Bonneville sells wholesale power to over 120 publicly-owned utilities · Variability in hydro generation led to development of the nation's first major spot market for wholesale power · Bonneville built and wholesale power are low · Retirement of coal-fired plants have been announced; will require development

224

Turbulent Flow Effects on the Biological Performance of Hydro-Turbines  

SciTech Connect (OSTI)

The hydro-turbine industry uses Computational Fluid Dynamics (CFD) tools to predict the flow conditions as part of the design process for new and rehabilitated turbine units. Typically the hydraulic design process uses steady-state simulations based on Reynolds-Averaged Navier-Stokes (RANS) formulations for turbulence modeling because these methods are computationally efficient and work well to predict averaged hydraulic performance, e.g. power output, efficiency, etc. However, in view of the increasing emphasis on environmental concerns, such as fish passage, the consideration of the biological performance of hydro-turbines is also required in addition to hydraulic performance. This leads to the need to assess whether more realistic simulations of the turbine hydraulic environment ?those that resolve unsteady turbulent eddies not captured in steady-state RANS computations? are needed to better predict the occurrence and extent of extreme flow conditions that could be important in the evaluation of fish injury and mortality risks. In the present work, we conduct unsteady, eddy-resolving CFD simulations on a Kaplan hydro-turbine at a normal operational discharge. The goal is to quantify the impact of turbulence conditions on both the hydraulic and biological performance of the unit. In order to achieve a high resolution of the incoming turbulent flow, Detached Eddy Simulation (DES) turbulence model is used. These transient simulations are compared to RANS simulations to evaluate whether extreme hydraulic conditions are better captured with advanced eddy-resolving turbulence modeling techniques. The transient simulations of key quantities such as pressure and hydraulic shear flow that arise near the various components (e.g. wicket gates, stay vanes, runner blades) are then further analyzed to evaluate their impact on the statistics for the lowest absolute pressure (nadir pressures) and for the frequency of collisions that are known to cause mortal injury in fish passing through hydro-turbines.

Richmond, Marshall C.; Romero Gomez, Pedro DJ

2014-08-25T23:59:59.000Z

225

Opportunities for Wide Bandgap Semiconductor Power Electronics...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

(3.3 kV SiC already being adopted in rail) * Grid-tied Solar Applications * HVDC Applications (Off-shore wind, hydro, ...) * Grid-tied Power Distribution...

226

EIS-0166: Bangor Hydro-Electric Transmission Line, Maine  

Broader source: Energy.gov [DOE]

The Department of Energy prepared this environmental impact statement while considering whether to authorize a Presidential permit for Bangor Hydro to construct a new electric transmission facility at the U.S. border with Canada.

227

Final Report - Wind and Hydro Energy Feasibility Study - June 2011  

SciTech Connect (OSTI)

This feasibility examined two of the Yurok Tribe's most promising renewable energy resources, wind and hydro, to provide the Tribe detailed, site specific information that will result in a comprehensive business plan sufficient to implement a favorable renewable energy project.

Jim Zoellick; Richard Engel; Rubin Garcia; Colin Sheppard

2011-06-17T23:59:59.000Z

228

Controlling a group of microCHPs: planning and realization  

E-Print Network [OSTI]

-called Virtual Power Plant (VPP) (see for a German example [2]). For possible methodologies of the control of a group of domestic Combined Heat and Power (microCHP) appliances, which together form a Virtual Power a conventional power plant, and more. To effect these possibilities the individual microCHPs need

Al Hanbali, Ahmad

229

Enhancing fire safety at Hydro plants with dry transformers  

SciTech Connect (OSTI)

Hydroelectric plant owners and engineers can use dry-type transformers to reduce fire hazards in auxiliary power systems. The decision to replace a liquid-immersed transformer with a dry-type product has a price: higher unit cost and a need to be more vigilant in detailing transformer specifications. But, whether the change affects only one failed transformer or is part of a plant rehabilitation project, the benefits in safety can be worth it. Voltages on hydroelectric plant auxiliary power systems can range from a 20 kV medium-voltage system to the normal 480-208/120 V low-voltage system. Dry transformers typically are used in such systems to reduce the fire hazard present with liquid-filled transformers. For a hydro plant owner or engineer seeking alternatives to liquid-filled transformers, there are two main kinds of dry-type transformers to consider: vacuum pressure impregnated (VPI) and cast coil epoxy resin. VPI transformers normally are manufactured in sizes up to 6,000 kVA with primary voltage ratings up to 20 kV. Cast coil transformers can be made in sizes from 75 to 10,000 kVA, with primary voltage ratings up to 34,500 V. Although the same transformer theory applies to dry transformers as to liquid-filled units, the cooling medium, air, required different temperature rise ratings, dielectric tests, and construction techniques to ensure reliability. Consequently, the factory and field tests for dry units are established by a separate set of American National Standards Institute (ANSI)/Institute of Electrical and Electronics Engineers (IEEE) standards. Cast coil transformers have several important advantages over VPI units.

Clemen, D.M. (Harza Engineering Company, Chicago, IL (United States))

1993-06-01T23:59:59.000Z

230

Hydro-Balanced Stuffing Box field test  

SciTech Connect (OSTI)

The Hydro-Balanced Stuffing Box is a seal assembly for polished rod pumping installations commonly used in oil and gas pumping well installations to contain produced well fluids. The improved stuffing box was developed and patented by Harold H. Palmour of The Palmour Group of Livingston, TX. The stuffing box is designed to reduce the incidence of seal leakage and to utilize an environmentally safe fluid, so that if there is any leakage, environmental damage is reduced or eliminated. The unit was tested on two wells at the Rocky Mountain Oilfield Testing Center. During the test period, the performance of the stuffing box was measured by monitoring the pressure on the tubing and the inner chamber with a Barton Two-pen recorder. The amount of safe fluid consumed, fluid leakage at the top of the stuffing box, pressure supplied from the nitrogen bottle, ambient temperature, and polish rod temperature was recorded. The stuffing box is capable of providing a better seal between well fluids an d the environment than conventional stuffing boxes. It allows the polished rod to operate cooler and with lubrication, extending the life of the packing elements, and reducing the amount of attention required to prevent leakage.

Giangiacomo, L.A.

1999-05-28T23:59:59.000Z

231

Using heat demand prediction to optimise Virtual Power Plant production capacity  

E-Print Network [OSTI]

1 Using heat demand prediction to optimise Virtual Power Plant production capacity Vincent Bakker is really produced by the fleet of micro- generators. When using micro Combined Heat and Power micro distributed electricity generation (micro-generation e.g. solar cells, micro Combined Heat and Power (micro

Al Hanbali, Ahmad

232

Evolving Einstein's Field Equations with Matter: The ``Hydro without Hydro'' Test  

E-Print Network [OSTI]

We include matter sources in Einstein's field equations and show that our recently proposed 3+1 evolution scheme can stably evolve strong-field solutions. We insert in our code known matter solutions, namely the Oppenheimer-Volkoff solution for a static star and the Oppenheimer-Snyder solution for homogeneous dust sphere collapse to a black hole, and evolve the gravitational field equations. We find that we can evolve stably static, strong-field stars for arbitrarily long times and can follow dust sphere collapse accurately well past black hole formation. These tests are useful diagnostics for fully self-consistent, stable hydrodynamical simulations in 3+1 general relativity. Moreover, they suggest a successive approximation scheme for determining gravitational waveforms from strong-field sources dominated by longitudinal fields, like binary neutron stars: approximate quasi-equilibrium models can serve as sources for the transverse field equations, which can be evolved without having to re-solve the hydrodynamical equations (``hydro without hydro'').

Thomas W. Baumgarte; Scott A. Hughes; Stuart L. Shapiro

1999-02-09T23:59:59.000Z

233

Assess the key physics that underpins high-hydro coupling-efficiency in NDCX-II experiments and high-gain heavy ion direct drive target designs using proven hydro codes like HYDRA  

E-Print Network [OSTI]

physics that underpins high-hydro coupling-efficiency in N Dtarget designs using proven hydro codes like H Y D R A . byF E targets, we have studied hydro and implosion efficiency

Barnard, J. J.

2010-01-01T23:59:59.000Z

234

A Low-Power Mobile Sensing Architecture  

E-Print Network [OSTI]

airborne wireless sensor network of micro-air vehicles. Inairborne wireless sensor network of micro-air vehicles mayplanning for micro-solar power sensor networks. In IPSN ’08:

Dutta, Prabal

2009-01-01T23:59:59.000Z

235

ACEEE International Journal on Control System and Instrumentation, Vol. 1, No. 1, July 2010 State Of The Art of Electronic Load Controller  

E-Print Network [OSTI]

Of The Art of Electronic Load Controller of Self- Excited Asynchronous Generator Used In Mini / Micro Hydro load controller for a mini / micro hydro power generations using MAT LAB / Simulink software. II characteristics of the turbine and induction machine for mini/micro­ hydro power generation system. He had been

Paris-Sud XI, Université de

236

Reliability and economy -- Hydro electricity for Iran  

SciTech Connect (OSTI)

Reliability is the probability that a device or system will perform its function adequately, for the period of time intended, under the operating conditions intended. Reliability and economy are two important factors in operating any system, especially in power generation. Due to the high rate in population growth in Iran, the experts have estimated that the demand for electricity will be about 63,000 MW in the next 25 years, the installed power is now about 26,000 MW. Therefore, the energy policy decision made in Iran is to go to power generation by hydroelectric plants because of reliability, availability of water resources and the economics of hydroelectric power.

Jahromi-Shirazi, M.J.; Zarbakhsh, M.H. [Teleh Shofage Co., Ghazvin (Iran, Islamic Republic of)

1998-12-31T23:59:59.000Z

237

Dynamic Reactive Power Control of Isolated Power Systems  

E-Print Network [OSTI]

This dissertation presents dynamic reactive power control of isolated power systems. Isolated systems include MicroGrids in islanded mode, shipboard power systems operating offshore, or any other power system operating in islanded mode intentionally...

Falahi, Milad

2012-10-03T23:59:59.000Z

238

Climatic regulation of the Black Sea hydro-meteorological and ecological properties at interannual-to-decadal time scales  

E-Print Network [OSTI]

Climatic regulation of the Black Sea hydro-meteorological and ecological properties at interannual Available online 3 March 2006 Abstract An examination of a wide spectrum of hydro

Dippner, Joachim W.

239

Application of life cycle assessment methodology at Ontario Hydro  

SciTech Connect (OSTI)

Ontario Hydro is an electrical utility located in Ontario, Canada. In 1995, Ontario Hydro adopted Sustainable Energy Development Policy and Principles that include the governing principle: {open_quotes}Ontario Hydro will integrate environmental and social factors into its planning, decision-making, and business practices.{close_quotes} Life cycle assessment was identified as a useful tool for evaluating environmental impacts of products and processes in support of decision-making. Ontario Hydro has developed a methodology for life cycle assessment (LCA) that is consistent with generally accepted practices, practical, and suitable for application in Ontario Hydro Business Units. The methodology is based on that developed by the Society of Environmental Toxicology and Chemistry (SETAC) but follows a pragmatic and somewhat simplified approach. In scoping an LCA, the breadth and depth of analysis are compatible with and sufficient to address the stated goal of the study. The depth of analysis is tied to (i) the dollar value of the commodity, process or activity being assessed, (ii) the degree of freedom available to the assessor to make meaningful choices among options, and (iii) the importance of the environmental or technological issues leading to the evaluation. A pilot study was completed to apply the methodology to an LCA of the light vehicle fleet (cars, vans and light pick-up trucks) at Ontario Hydro. The objective of the LCA was to compare the life cycle impacts of alternative vehicle fuel cycles: gasoline, diesel, natural gas, propane, and alcohol; with particular focus on life cycle emissions, efficiency and cost. The study concluded that for large vehicles (1/2 ton and 3/4 ton) that travel more than 35000 km/year, natural gas and propane fuelling offer both cost reduction and emissions reduction when compared to gasoline vehicles.

Reuber, B.; Khan, A. [Ontario Hydro, Ontario (Canada)

1996-12-31T23:59:59.000Z

240

Hydro-Ecologic Responses to Land Use in Small Urbanizing Watersheds Within the Chesapeake Bay  

E-Print Network [OSTI]

Hydro-Ecologic Responses to Land Use in Small Urbanizing Watersheds Within the Chesapeake Bay. The consequences for both the hydrology and 41 #12;42 HYDRO-ECOLOGIC RESPONSES TO LAND USE IN SMALL URBANIZING

Palmer, Margaret A.

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Simulated watershed responses to land cover changes using the Regional Hydro-Ecological Simulation System  

E-Print Network [OSTI]

Simulated watershed responses to land cover changes using the Regional Hydro-Ecological Simulation Old Main Hill, Logan, UT, 84322-8200, USA Abstract: In this work, we used the Regional Hydro

Tarboton, David

242

Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs  

E-Print Network [OSTI]

Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs Supervisory Committee Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management of Environmental Studies) Departmental Member For energy utilities faced with expanded jurisdictional energy

Victoria, University of

243

Process development of silicon-silicon carbide hybrid structures for micro-engines (January 2002)  

E-Print Network [OSTI]

MEMS-based gas turbine engines are currently under development at MIT for use as a button-sized portable power generator or micro-aircraft propulsion sources. Power densities expected for the micro-engines require very ...

Choi, D.

244

Evaluation of Blade-Strike Models for Estimating the Biological Performance of Large Kaplan Hydro Turbines  

SciTech Connect (OSTI)

BioIndex testing of hydro-turbines is sought as an analog to the hydraulic index testing conducted on hydro-turbines to optimize their power production efficiency. In BioIndex testing the goal is to identify those operations within the range identified by Index testing where the survival of fish passing through the turbine is maximized. BioIndex testing includes the immediate tailrace region as well as the turbine environment between a turbine's intake trashracks and the exit of its draft tube. The US Army Corps of Engineers and the Department of Energy have been evaluating a variety of means, such as numerical and physical turbine models, to investigate the quality of flow through a hydro-turbine and other aspects of the turbine environment that determine its safety for fish. The goal is to use these tools to develop hypotheses identifying turbine operations and predictions of their biological performance that can be tested at prototype scales. Acceptance of hypotheses would be the means for validation of new operating rules for the turbine tested that would be in place when fish were passing through the turbines. The overall goal of this project is to evaluate the performance of numerical blade strike models as a tool to aid development of testable hypotheses for bioIndexing. Evaluation of the performance of numerical blade strike models is accomplished by comparing predictions of fish mortality resulting from strike by turbine runner blades with observations made using live test fish at mainstem Columbia River Dams and with other predictions of blade strike made using observations of beads passing through a 1:25 scale physical turbine model.

Deng, Zhiqun; Carlson, Thomas J.; Ploskey, Gene R.; Richmond, Marshall C.

2005-11-30T23:59:59.000Z

245

Volume reduction/solidification of liquid radioactive waste using bitumen at Ontario Hydro`s Bruce Nuclear Generating Station `A`  

SciTech Connect (OSTI)

Ontario Hydro at the Bruce Nuclear Generating Station `A` has undertaken a program to render the station`s liquid radioactive waste suitable for discharge to Lake Huron by removing sufficient radiological and chemical contaminants to satisfy regulatory requirements for emissions. The system will remove radionuclide and chemical contaminants from five different plant waste streams. The contaminants will be immobilized and stored at on-site radioactive waste storage facilities and the purified streams will be discharged. The discharge targets established by Ontario Hydro are set well below the limits established by the Ontario Ministry of Environment (MOE) and are based on the Best Available Technology Economically Achievable Approach (B.A.T.E.A.). ADTECHS Corporation has been selected by Ontario Hydro to provide volume reduction/solidification technology for one of the five waste streams. The system will dry and immobilize the contaminants from a liquid waste stream in emulsified asphalt using thin film evaporation technology.

Day, J.E.; Baker, R.L.

1995-05-01T23:59:59.000Z

246

To: NW Hydro Association From: Dick Wanderscheid, Angus Duncan and Todd Reeve  

E-Print Network [OSTI]

Memo To: NW Hydro Association From: Dick Wanderscheid, Angus Duncan and Todd Reeve Re: The Bonneville Environmental Foundation's comments on the draft hydro potential study BEF staff completed to address the larger, conceptual picture of the hydro potential in the region. In particular, we attempted

247

Evaluation of the Hydro-Thermodynamic Soil Vegetation Scheme and implementation of a new numerical scheme  

E-Print Network [OSTI]

ii Evaluation of the Hydro-Thermodynamic Soil Vegetation Scheme and implementation of a new.S. Fairbanks, Alaska August 2005 #12;iii Abstract The Hydro-Thermodynamic Soil-Vegetation Scheme (HTSVS........................................................................................................................... 24 Evaluation of snow depth and soil temperatures predicted by the Hydro- Thermodynamic Soil

Moelders, Nicole

248

Arctic Region Evaluation of the Hydro-Thermodynamic Soil Vegetation Scheme (HTSVS)  

E-Print Network [OSTI]

Arctic Region Evaluation of the Hydro-Thermodynamic Soil Vegetation Scheme (HTSVS) Pamela Spier, University of Alaska, Fairbanks, AK Abstract This paper presents an evaluation of the Hydro. Introduction and Motivation The Hydro-Thermodynamic Soil Vegetation Scheme (HTSVS, Kramm et al. 1996, Mölders

Moelders, Nicole

249

Towards Better Utilization of NEXRAD Data in Hydrology: an Overview of Hydro-NEXRAD  

E-Print Network [OSTI]

Towards Better Utilization of NEXRAD Data in Hydrology: an Overview of Hydro-NEXRAD Witold F metadata extraction and management techniques are required. The authors describe and discuss the Hydro of the Hydro-NEXRAD project is to increase the use of NEXRAD data in hydrologic research. The project

Lawrence, Ramon

250

Hydro-thermal flow in a rough fracture EC Contract SES6-CT-2003-502706  

E-Print Network [OSTI]

Hydro-thermal flow in a rough fracture EC Contract SES6-CT-2003-502706 PARTICIPANT ORGANIZATION NAME: CNRS Synthetic 2nd year report Related with Work Package............ HYDRO-THERMAL FLOW in the influence of a realistic geometry of the fracture on its hydro-thermal response. Several studies have

Schmittbuhl, Jean

251

Constraints on the lake volume required for hydro-fracture through ice sheets  

E-Print Network [OSTI]

Constraints on the lake volume required for hydro-fracture through ice sheets M. J. Krawczynski,1 M April 2009; published 16 May 2009. [1] Water-filled cracks are an effective mechanism to drive hydro to rapidly drive hydro-fractures through 1­1.5 km of subfreezing ice. This represents $98% of the meltwater

Skemer, Philip

252

Estimating runoff using hydro-geodetic approaches; assessment and comparison M. J. Tourian1  

E-Print Network [OSTI]

Estimating runoff using hydro-geodetic approaches; assessment and comparison M. J. Tourian1 , C- drological balance equation, hydro-meteorological balance equation, least squares prediction using change from GRACE hydro-meteorological balance equation (Ratm) Ratm = - · Q - dM dt . · Q refers

Stuttgart, Universität

253

Climate Change in Scotland: Impact on Mini-Hydro G.P. Harrison  

E-Print Network [OSTI]

be generated from wind, wave, biomass or small- or mini-hydro plant. Production from these resources some 300 MW is small hydro potential capable of producing energy at less than 7p/kWh (Garrad Hassan, 2001). Although many of the better sites for small and mini-hydro have already been developed

Harrison, Gareth

254

Dimensionnement et gestion d'un systme de stockage thermique par hydro-accumulation : application la  

E-Print Network [OSTI]

Dimensionnement et gestion d'un système de stockage thermique par hydro-accumulation : application de stockage thermique de type hydro-accumulation destiné à une chaufferie collective multi, mix-énergétique, stockage thermique, hydro-accumulation, dimensionnement optimal, gestion, graphe d

Paris-Sud XI, Université de

255

Mod`ele Elements Finis d'un Pli Vocal Artificiel avec Couplage Hydro-elastique  

E-Print Network [OSTI]

Mod`ele El´ements Finis d'un Pli Vocal Artificiel avec Couplage Hydro-´elastique N. Hermanta , F formulation variationnelle du couplage hydro-élastique. Un premier calcul hyper-élastique simule le gonflement dans l'analyse modale des vibrations de petite amplitude du système hydro-élastique, permettant ainsi

Paris-Sud XI, Université de

256

NOAA Technical Memorandum NWS HYDRO 39 PROBABLE MAXIMUM PRECIPITATION FOR THE UPPER  

E-Print Network [OSTI]

NOAA Technical Memorandum NWS HYDRO 39 PROBABLE MAXIMUM PRECIPITATION FOR THE UPPER DEERFIELD RIVER The Office of Hydrology (HYDRO) of the National Weather Service (NWS) develops procedures for making river agencies, and conducts pertinent research and development. NOAA Technical Memorandums in the NWS HYDRO

257

Title: Hydraulic modeling of a mixed water level control hydro-mechanical gate  

E-Print Network [OSTI]

Title: Hydraulic modeling of a mixed water level control hydro-mechanical gate Ludovic Cassan1 Abstract: The article describes the hydraulic functioning of a mixed water level control hydro- mechanical of the model to reproduce the functioning of this complex hydro-mechanical system. CE database Subject headings

Paris-Sud XI, Université de

258

Numerical Modeling of Hydro-acoustic Waves In Weakly Compressible Fluid Ali Abdolali1,2  

E-Print Network [OSTI]

Numerical Modeling of Hydro-acoustic Waves In Weakly Compressible Fluid Ali Abdolali1,2 , James T of Civil Engineering, University of Roma Tre Low-frequency hydro-acoustic waves are precursors of tsunamis. Detection of hydro-acoustic waves generated due to the water column compression triggered by sudden seabed

Kirby, James T.

259

LOCAL UNDERSTANDING OF HYDRO-CLIMATE CHANGES IN MONGOLIA Submitted by  

E-Print Network [OSTI]

THESIS LOCAL UNDERSTANDING OF HYDRO-CLIMATE CHANGES IN MONGOLIA Submitted by Tumenjargal Sukh 2012 All Rights Reserved #12;ABSTRACT LOCAL UNDERSTANDING OF HYDRO-CLIMATE CHANGES IN MONGOLIA Air the degree of change of Mongolian water resources. We find that herders' local knowledge of hydro

MacDonald, Lee

260

A lattice-based query system for assessing the quality of hydro-ecosystems  

E-Print Network [OSTI]

A lattice-based query system for assessing the quality of hydro-ecosystems Agn`es Braud1 Cristina used for building a hierarchy of site pro- files which are annotated by hydro in the project. This paper presents an application of Galois lattices to the hydro-ecological domain, focussing

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Operation of a steam hydro-gasifier in a fluidized bed reactor  

E-Print Network [OSTI]

OF A S T E A M HYDRO-GASIFIER IN A FLUIDIZED BED REACTOROF A S T E A M HYDRO-GASIFIER IN A FLUIDIZED BED REACTOR F Iis fed into a hydro-gasifier reactor. One such process was

Park, Chan Seung; Norbeck, Joseph N.

2008-01-01T23:59:59.000Z

262

Ultra-Micro Wave Rotor Investigations Florin Iancu, Janusz Piechna*  

E-Print Network [OSTI]

Nowowiejska Str., 00-665 Warsaw, Poland Abstract Ultra Micro Gas Turbines (UµGT) are expected to be a next of incorporating a wave rotor to an ultra-micro gas turbine and the advantages of wave rotors, topping gas turbines at about 70%. Keywords: PowerMEMS, wave rotor, ultra micro gas turbine, pressure exchanger, efficiency 1

Müller, Norbert

263

1/12/14 Energytechnologyand engineering: Micro-windmills mayone daypower your smart phone energy-engineer.blogspot.com/2014/01/micro-windmills-may-one-day-power-your.html 1/11  

E-Print Network [OSTI]

trends in 2014 and beyond Two more mega solar deals in China Oil markets and the shale boom 2014 System overload slows Hawaii's solar energy boom Power play: Utilities want solar users to pay up China adds solar pollution funds poised to deliver on advanc... US new solar PV installations reach record 4.2 GW Solar

Chiao, Jung-Chih

264

Optimal Power Dispatch via Multistage Stochastic Programming  

E-Print Network [OSTI]

Mathematical models for cost-optimal power scheduling in hydro-thermal systems often combine several di cultiesOptimal Power Dispatch via Multistage Stochastic Programming M.P. Nowak1 and W. Romisch1 Abstract. The short-term cost-optimal dispatch of electric power in a generation sys- tem under uncertain electricity

Römisch, Werner

265

Hydro, Solar, Wind The Future of Renewable Energy  

E-Print Network [OSTI]

Hydro, Solar, Wind The Future of Renewable Energy Joseph Flocco David Lath Department of Electrical. Hydropower Water has grown in previous years to become the most widely used form of renewable energy across years to come from Hydropower. It is considered to be a renewable energy source because it uses

Lavaei, Javad

266

Downscaling, Data Fusion, and Data Assimilation in Hydro-meteorology  

E-Print Network [OSTI]

Downscaling, Data Fusion, and Data Assimilation in Hydro (1997 -) GPM (2014 -) PR #12;3 GPM: a multi-satellite mission extending beyond the tropics #12;4 DPR of precipitation #12;Multi-sensor Data Fusion Problem · Optimal merging of multi-sensor precipitation observations

267

The implementation of micro hydro projects in remote villages in developing countries: An interdisciplinary approach.  

E-Print Network [OSTI]

??An established body of literature now exists in the field of rural electrification projects in developing countries. Much of this literature has focused on the… (more)

Murni, Sari

2014-01-01T23:59:59.000Z

268

Oxidative desulfurization of dibenzothiophene with tert-butyl hydro peroxide in a photochemical micro-reactor.  

E-Print Network [OSTI]

??Sulfur content in fuels is an increasingly critical environmental issue. Hydrodesulfurization removes sulfur from hydrocarbons; however, further desulfurization is necessary in fuels. New methods are… (more)

Hebert, Eilleen M.

2007-01-01T23:59:59.000Z

269

Micro level study on groundwater contaminant transport modeling of industrial pollution and hydro remediation;.  

E-Print Network [OSTI]

??Water pollution is a serious problem world over, as a growing percentage of surface water resources and groundwater reserves are being contaminated due to uncontrolled… (more)

Hemamalini C G

2014-01-01T23:59:59.000Z

270

OBSTACLES, ACTIONS, AND OUTCOMES: LEARNING PROCESS APPROACH TO COMMUNITY MICRO HYDRO IN KALAHANDI, ORISSA.  

E-Print Network [OSTI]

?? Within the context of sustainable rural development and using action research methodology, the researcher identified and addressed challenges to implementing decentralized renewable energy applications… (more)

Vaghela, Dipti Mulrajsinh

2010-01-01T23:59:59.000Z

271

Kenya-Affecting Electricity Policy through a Community Micro Hydro Project  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place: EdenOverviewKanematsuKas FarmsKenstonsourceKenworth Jump|

272

The second act of hydro: small perturbations  

E-Print Network [OSTI]

Hydrodynamical description of the "Little Bang" in heavy ion collisions is surprisingly successful: here we systematically study propagation of small perturbations %, also treated hydrodynamically. Using analytic description of the expanding fireball known as the "Gubser flow", we proceed to linearized equations for perturbations. As all variables are separated and all equations solved (semi)analytically, we can collect all the harmonics and reconstruct the complete Green function of the problem, even in the viscous case. Applying it to the power spectrum we found acoustic minimum at the $m=7$ and maximum at $m=9$, which remarkably have some evidence for both in the data. We estimate effective viscosity and size of the perturbation from a fit to power spectrum. The shape of the two-point correlator is also reproduced remarcably well. At the end we argue that independent perturbations are local, and thus harmonics phases are correlated.

Pilar Staig; Edward Shuryak

2011-08-26T23:59:59.000Z

273

IEEE TRANSACTIONS ON POWER SYSTEMS 1 On the computational studies of deterministic global  

E-Print Network [OSTI]

optimization of head dependent short-term hydro scheduling Ricardo M. Lima, Marian G. Marcovecchio, Augusto Q scheduling, MINLP, global optimization. NOMENCLATURE A. Indices and sets i,k,I Hydro plants IC PairsIEEE TRANSACTIONS ON POWER SYSTEMS 1 On the computational studies of deterministic global

Grossmann, Ignacio E.

274

A microrheological study of hydrogel kinetics and micro-heterogeneity  

E-Print Network [OSTI]

DOI 10.1140/epje/i2014-14044-y Regular Article Eur. Phys. J. E (2014) 37: 44 THE EUROPEAN PHYSICAL JOURNAL E A microrheological study of hydrogel kinetics and micro-heterogeneity Anders Aufderhorst-Roberts1,a, William J. Frith2, and Athene M. Donald... unique mechan- ical properties [5]. The range of available low-molecular-weight hydro- gelating systems has increased in recent years as their discovery has steadily relied more upon rational de- sign and less upon serendipity [6]. Hydrogelating sys- tems...

Aufderhorst-Roberts, Anders; Frith, William J.; Donald, Athene M.

2014-05-27T23:59:59.000Z

275

Forecasting Uncertainty Related to Ramps of Wind Power Production  

E-Print Network [OSTI]

- namic reserve quantification [8], for the optimal oper- ation of combined wind-hydro power plants [5, 1Forecasting Uncertainty Related to Ramps of Wind Power Production Arthur Bossavy, Robin Girard - The continuous improvement of the accuracy of wind power forecasts is motivated by the increasing wind power

Boyer, Edmond

276

Power Reserve Management by Two-Stage Stochastic Programming  

E-Print Network [OSTI]

reserve management becomes important. Previous studies indicate that power optimization problems can of stochastic programming to a power reserve management problem. Very often power optimization problems involve considerable attention. Examples on hydro-thermal power production planning are [4], [6] and [9]. Both problems

277

Electrostatic Energy Harvester and Li-Ion Charger Circuit for Micro-Scale Applications  

E-Print Network [OSTI]

, low duty-cycle task multiplex- ing, and smart power-aware networks, the energy stored in micro- scaleElectrostatic Energy Harvester and Li-Ion Charger Circuit for Micro-Scale Applications Erick O micro-systems like biomedical implants and ad-hoc wireless transceiver micro-sensors continue

Rincon-Mora, Gabriel A.

278

EA-281 Manitoba Hydro | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle1 Closing American Electric Power80A Rainy Manitoba

279

Challenges and alternatives of the New England-Hydro-Quebec HVDC project  

SciTech Connect (OSTI)

The New England-Hydro-Quebec HVDC (high voltage direct current) Intertie design will allow an asynchronous bidirectional interchange of energy, up to an inital power level of 690 MW, at a system voltage of about 450 kVdc. The advantages of HVDC transmission in conjunction with today's energy production/transportation environment are producing an ever-growing number of planned and potential HVDC projects. HVDC projects present challenges, alternatives, and special considerations, some of which are unique to the specific project and some with a degree of commonality with other HVDC projects. The article summarizes some of the important considerations for the NE-HQ- HVDC project, with an emphasis on the users' perspectives. 4 figures, 1 table.

Allaire, J.F.; Durand, C.; Fink, J.L.; Haralampu, G.S.; Holt, D.L.; Richardson, L.M.

1984-01-01T23:59:59.000Z

280

EUNHA: a new cosmological hydro simulation code  

E-Print Network [OSTI]

We have developed a parallel cosmological hydrodynamic simulation code designed for the study of formation and evolution of cosmological structures. The gravitational force is calculated using the TreePM method and the hydrodynamics is implemented based on the smoothed particle hydrodynamics. The initial displacement and velocity of simulation particles are calculated according to second-order linear perturbation theory using the power spectra of dark matter and baryonic matter. The initial background temperature is given by Recfast and the temperature uctuations at the initial particle position are determined by the adiabatic model. We use a time-limiter scheme over the individual time steps to capture shock-fronts and to ease the time-step tension between the shock and preshock particles. We also include the astrophysical gas processes of radiative heating/cooling, star formation, metal enrichment, and supernova feedback. We have tested the code in several standard cases such as one-dimensional Riemann prob...

Shina, Jihye; Kim, Sungsoo S; Park, Changbom

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

July 22,2010 Department of Electrical and Electronic Engineering  

E-Print Network [OSTI]

, hydro power, wind power, solar energy, other renewable energy sources, distributed generation. (mutually; basic computer building blocks; register transfers and phases of instruction execution; micro

Leung, Ka-Cheong

282

Fundamental Drivers of Pacific Northwest Power Markets  

E-Print Network [OSTI]

, utilities, power marketers, investors, and others on wholesale electricity and natural gas markets. Experts Load Transmission Thermal Hydro Wind (2005) #12;Natural Gas Capacity 6 5,000 MW of Natural Gas;Natural Gas Power Plant Production is Significantly Down 2010 to 2012 13 #12;Mid C Peak Heat Rates 14

283

Stresa, Italy, 26-28 April 2006 A MICRO TURBINE DEVICE WITH ENHANCED  

E-Print Network [OSTI]

reported during test. 1. INTRODUCTION Micro gas turbine engine [1-2] is one of the promising solutions to provide high-density power source for microsystems. We are developing a silicon-based micro gas turbine in micro gas turbine engine, which will generate power output and drive the compressor. The critical

Paris-Sud XI, Université de

284

Towards Wide-angle Micro Vision Sensors Sanjeev J. Koppal* Ioannis Gkioulekas* Travis Young+ Hyunsung Park*  

E-Print Network [OSTI]

, including micro- robots and other small machines [16], and nodes of far- flung sensor networks [46]. Power1 Towards Wide-angle Micro Vision Sensors Sanjeev J. Koppal* Ioannis Gkioulekas* Travis Young on micro-scale devices is a challenge. On these platforms, the power and mass constraints are severe enough

285

PHNOMNES DITS HYDRO-LECTRIQUES ET HYDROMAGNTIQUES; PAR M. C.-A. BJERKNES (1),  

E-Print Network [OSTI]

509 PH�NOM�NES DITS HYDRO-�LECTRIQUES ET HYDROMAGN�TIQUES; PAR M. C.-A. BJERKNES (1), Professeur à corps hydro- électrisés s'attirent ou se repoussent, suivant que leurs vibrations sont concordantes ou- minuent en même temps). Un hydro-aimant, formé ou bien d'une splzère oscillante ou de deux pulsateurs

Paris-Sud XI, Université de

286

Review of Pump as Turbine (PAT) for Micro-Hydropower  

E-Print Network [OSTI]

Abstract — Micro-hydropower projects are the excellent alternative for electricity generation in remote areas. These projects can be installed on small streams, rivers, and channels without any recognizable effect on environment. The only problem in micro-hydro projects is the high cost of turbine, for which Pump as Turbine (PAT) is a successful solution. An objective of the present study is to review the selection criteria of PAT for various hydropower sites having different potential. Since no general model has been developed which can be used to calculate the conversion factors for PAT, so this paper focuses on the research that have been carried out in this field. The limitations of the various available models and other selection criteria have also been discussed in this paper.

Tarang Agarwal

287

BC Hydro Brings Energy Savings to Low-Income Families in Canada...  

Energy Savers [EERE]

needs described in their application. Other BC Hydro incentives not based on income include a rebate program for insulation, draft-proof measures, heat pumps, and water heaters...

288

Role of Pumped Storage Hydro Resources in Electricity Markets and System Operation: Preprint  

SciTech Connect (OSTI)

The most common form of utility- sized energy storage system is the pumped storage hydro system. Originally, these types of storage systems were economically viable simply because they displace more expensive generating units. However, over time, as those expensive units became more efficient and costs declined, pumped hydro storage units no longer have the operational edge. As a result, in the current electricity market environment, pumped storage hydro plants are struggling. To offset this phenomenon, certain market modifications should be addressed. This paper will introduce some of the challenges faced by pumped storage hydro plants in today's markets and purpose some solutions to those problems.

Ela, E.; Kirby, B.; Botterud, A.; Milostan, C.; Krad, I.; Koritarov, V.

2013-05-01T23:59:59.000Z

289

E-Print Network 3.0 - aspect ratio micro-electro-magnetic-mechanical...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

micro-electro-magnetic-mechanical Search Powered by Explorit Topic List Advanced Search Sample search results for: aspect ratio micro-electro-magnetic-mechanical Page: << < 1 2 3 4...

290

Micro-machined resonator oscillator  

DOE Patents [OSTI]

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a telemetered sensor beacon'' that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20--100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available. 21 figs.

Koehler, D.R.; Sniegowski, J.J.; Bivens, H.M.; Wessendorf, K.O.

1994-08-16T23:59:59.000Z

291

Micro-machined resonator oscillator  

DOE Patents [OSTI]

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

Koehler, Dale R. (Albuquerque, NM); Sniegowski, Jeffry J. (Albuquerque, NM); Bivens, Hugh M. (Albuquerque, NM); Wessendorf, Kurt O. (Albuquerque, NM)

1994-01-01T23:59:59.000Z

292

Microsoft PowerPoint - 2014 HydroPower - Stockton Turbine Replacement June 2014 [Compatibility Mode]  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping theEnergyInnovationMichaelGE1Plan forNASEO 2006/07SanSh

293

Microsoft PowerPoint - ACOE Regional HydroPower Conference Presentation.ppt  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping theEnergyInnovationMichaelGE1PlanARM Science Team Meeting Hyatt

294

Pion correlations in hydro-inspired models with resonances  

E-Print Network [OSTI]

The effects of the freeze-out hypersurface and resonance decays on the pion correlation functions in relativistic heavy-ion collisions are studied with help of the hydro-inspired models with single freeze-out. The heavy-ion Monte-Carlo generator THERMINATOR is used to generate hadronic events describing production of particles from a thermalized and expanding source. We find that the short-lived resonances increase the pionic HBT radii by about 1 fm. We also find that the pion HBT data from RHIC are fully compatible with the single freeze-out scenario provided a special choice of the freeze-out hypersurface is made.

W. Florkowski; W. Broniowski; A. Kisiel; J. Pluta

2006-09-19T23:59:59.000Z

295

New England Hydro-Trans Corp | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 -Energieprojekte3InformationofServicesNeuCo620572°,York:Hydro-Trans Corp Jump

296

OpenHydro Group Limited | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(UtilityCounty, Michigan: EnergyOpenBarter Jump to:sourceStub Jump to:OpenHydro

297

MHK Technologies/HydroVenturi | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IE <AirWECHelix < MHK TechnologiesHydroVenturi

298

Renewable Energy, Nuclear Power and Galileo: Do Scientists Have a Duty to Expose Popular Misconceptions?  

E-Print Network [OSTI]

1 OPINION Renewable Energy, Nuclear Power and Galileo: Do Scientists Have a Duty to Expose Popular misconception discussed below concerns the fallacy that renewable energy is rapidly supplanting conventional energy. Total non-hydro renewables today offset o

Hansen, James E.

299

Geek-Up[09.03.10] -- Innovative Silicon Wafers, Real-Time Power...  

Broader source: Energy.gov (indexed) [DOE]

difference. We buy power to decrease the system load or sell to increase it. Or, the hydro operator can increase or decrease generation at the dams." Learn how BPA's real-time...

300

NAPS-2000, Waterloo, ON, October 2000 Stability Improvement Using TCSC in Radial Power Systems  

E-Print Network [OSTI]

, load rejection, break resistors, fast-valving,capacitor bank or reactor switching, etc. More recently (hydro, gas) to majorload centers over longtransmission lines. Power sys- tems with these features

Cañizares, Claudio A.

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Testing the accuracy of the Hydro-PM approximation in numerical simulations of the Lyman-alpha forest  

E-Print Network [OSTI]

We implement the hydro-PM (HPM) technique (Gnedin & Hui 1998) in the hydrodynamical simulation code GADGET-II and quantify the differences between this approximate method and full hydrodynamical simulations of the Lyman-alpha forest in a concordance LCDM model. At redshifts z=3 and z=4, the differences between the gas and dark matter (DM) distributions, as measured by the one-point distribution of density fluctuations, the density power spectrum and the flux power spectrum, systematically decrease with increasing resolution of the HPM simulqation. However, reducing these differences to less than a few percent requires a significantly larger number of grid-cells than particles, with a correspondingly larger demand for memory. Significant differences in the flux decrement distribution remain even for very high resolution hydro-PM simulations, particularly at low redshift. At z=2, the differences between the flux power spectra obtained from HPM simulations and full hydrodynamical simulations are generally large and of the order of 20-30 %, and do not decrease with increasing resolution of the HPM simulation. This is due to the presence of large amounts of shock-heated gas, a situation which is not adequately modelled by the HPM approximation. We confirm the results of Gnedin & Hui (1998) that the statistical properties of the flux distribution are discrepant by > 5-20 % when compared to full hydrodynamical simulations. The discrepancies in the flux power spectrum are strongly scale- and redshift-dependent and extend to large scales. Considerable caution is needed in attempts to use calibrated HPM simulations for quantitative predictions of the flux power spectrum and other statistical properties of the Lyman-alpha forest.

Matteo Viel; Martin G. Haehnelt; Volker Springel

2006-04-20T23:59:59.000Z

302

Formulaire de demande de bourse institutionnelle d'Hydro-Qubec Bourse de recrutement* OU Bourse de persvrance**  

E-Print Network [OSTI]

Annexe B Formulaire de demande de bourse institutionnelle d'Hydro-Québec Bourse de recrutement* OU'étudiant : Montant de la bourse institutionnelle d'Hydro-Québec : 5 000 $ Montant de l

Vellend, Mark

303

Hydro-mechanical modelling of geological CO2 storage and the study of possible caprock fracture mechanisms  

E-Print Network [OSTI]

Hydro-mechanical modelling of geological CO2 storage and the study of possible caprock fracture element modelling of a hypothetical underground carbon dioxide (CO2) storage operation. The hydro

304

Author's personal copy Opportunities and barriers to pumped-hydro energy storage in the United States  

E-Print Network [OSTI]

available commercially for grid-tied electricity storage, pumped- hydro energy storage (PHES) and compressed air energy storage (CAES). Of the two, PHES is far more widely adopted. In the United StatesAuthor's personal copy Opportunities and barriers to pumped-hydro energy storage in the United

Jackson, Robert B.

305

MOMENT-FREQUENCY DISTRIBUTION USED AS A CONSTRAINT FOR HYDRO-MECHANICAL  

E-Print Network [OSTI]

MOMENT-FREQUENCY DISTRIBUTION USED AS A CONSTRAINT FOR HYDRO-MECHANICAL MODELLING IN FRACTURE fractured rocks for EGS purposes is accompanied by microseismicity. From our numerical hydro are partly liberated and the resulting small sliding movements give rise to low frequency stress waves

Paris-Sud XI, Université de

306

Hydro-kinetic approach to relativistic heavy ion collisions  

E-Print Network [OSTI]

We develop a combined hydro-kinetic approach which incorporates a hydrodynamical expansion of the systems formed in \\textit{A}+\\textit{A} collisions and their dynamical decoupling described by escape probabilities. The method corresponds to a generalized relaxation time ($\\tau_{\\text{rel}}$) approximation for the Boltzmann equation applied to inhomogeneous expanding systems; at small $\\tau_{\\text{rel}}$ it also allows one to catch the viscous effects in hadronic component - hadron-resonance gas. We demonstrate how the approximation of sudden freeze-out can be obtained within this dynamical picture of continuous emission and find that hypersurfaces, corresponding to a sharp freeze-out limit, are momentum dependent. The pion $m_{T}$ spectra are computed in the developed hydro-kinetic model, and compared with those obtained from ideal hydrodynamics with the Cooper-Frye isothermal prescription. Our results indicate that there does not exist a universal freeze-out temperature for pions with different momenta, and support an earlier decoupling of higher $p_{T}$ particles. By performing numerical simulations for various initial conditions and equations of state we identify several characteristic features of the bulk QCD matter evolution preferred in view of the current analysis of heavy ion collisions at RHIC energies.

S. V. Akkelin; Y. Hama; Iu. A. Karpenko; Yu. M. Sinyukov

2008-08-28T23:59:59.000Z

307

2/1/2014 Micro Windmill-Powered Chargers -This 1.88MM Wide Windmill Can Recharge Your Smartphone Battery(VIDEO) http://www.trendhunter.com/trends/windmill-powered 1/7  

E-Print Network [OSTI]

Trends Cost Of Solar Panels www.homeadvisor.com Enter Your Zip Code & Connect. Pre-Screened Contractors Battery(VIDEO) http://www.trendhunter.com/trends/windmill-powered 1/7 Select Category TECH Wholesale Solar Panels www.solarhome.org 290W Trina Panels - from $0.69/watt In Pallet or Container Quantity Published

Chiao, Jung-Chih

308

Combustion systems for power-MEMS applications  

E-Print Network [OSTI]

As part of an effort to develop a micro-scale gas turbine engine for power generation and micro-propulsion applications, this thesis presents the design, fabrication, experimental testing, and modeling of the combustion ...

Spadaccini, Christopher M. (Christopher Michael), 1974-

2004-01-01T23:59:59.000Z

309

A thermo-hydro-mechanical coupled model in local thermal non-equilibrium for fractured HDR reservoir  

E-Print Network [OSTI]

A thermo-hydro-mechanical coupled model in local thermal non-equilibrium for fractured HDR of New South Wales, Sydney 2052, Australia. Abstract The constitutive thermo-hydro-mechanical equations is next applied to simulate circulation tests at the Fenton Hill HDR reservoir. The finer thermo-hydro

Boyer, Edmond

310

Do phreatomagmatic eruptions at Ubehebe Crater (Death Valley, California) relate to a wetter than present hydro-climate?  

E-Print Network [OSTI]

present hydro-climate? Peri Sasnett,1,2 Brent M. Goehring,1,2,3 Nicholas Christie-Blick,1,2 and Joerg M the idea that volcanism may relate to a wetter than present hydro-climate. Twelve of the fifteen ages that eruptive timing relates to a wetter hydro-climate. Instead, the presence of a relatively shallow modern

Christie-Blick, Nicholas

311

JOURNAL OF GEOPHYSICAL RESEARCH, VOL. ???, XXXX, DOI:10.1002/, Hydro-acoustic and tsunami waves generated by the1  

E-Print Network [OSTI]

JOURNAL OF GEOPHYSICAL RESEARCH, VOL. ???, XXXX, DOI:10.1002/, Hydro-acoustic and tsunami waves TSUNAMI Abstract. Detection of low-frequency hydro-acoustic waves as precur-4 sor components model gave us the opportunity to study13 the hydro-acoustic wave propagation in a large-scale domain

Kirby, James T.

312

Phenomene couple thermo-hydro-mecanique des roches fracturees: Recents developpements des methodes de modelisation et tests de validation  

E-Print Network [OSTI]

95-54 Phenomene couple thermo-hydro-mecanique des roches fracturees: Recents developpements des methodes de modelisation et tests de validation Coupled thermo-hydro-mechanical phenomena in fractured fracture.La deuxiemequestion concemela modelisation des phenomenes couples thenno-hydro-mecaniques. L

Paris-Sud XI, Université de

313

Combustion and direct energy conversion in a micro-combustor  

E-Print Network [OSTI]

The push toward the miniaturization of electromechanical devices and the resulting need for micro-power generation (milliwatts to watts) with low-weight, long-life devices has led to the recent development of the field of micro-scale combustion...

Lei, Yafeng

2006-10-30T23:59:59.000Z

314

High-speed micro-electro-discharge machining.  

SciTech Connect (OSTI)

When two electrodes are in close proximity in a dielectric liquid, application of a voltage pulse can produce a spark discharge between them, resulting in a small amount of material removal from both electrodes. Pulsed application of the voltage at discharge energies in the range of micro-Joules results in the continuous material removal process known as micro-electro-discharge machining (micro-EDM). Spark erosion by micro-EDM provides significant opportunities for producing small features and micro-components such as nozzle holes, slots, shafts and gears in virtually any conductive material. If the speed and precision of micro-EDM processes can be significantly enhanced, then they have the potential to be used for a wide variety of micro-machining applications including fabrication of microelectromechanical system (MEMS) components. Toward this end, a better understanding of the impacts the various machining parameters have on material removal has been established through a single discharge study of micro-EDM and a parametric study of small hole making by micro-EDM. The main avenues for improving the speed and efficiency of the micro-EDM process are in the areas of more controlled pulse generation in the power supply and more controlled positioning of the tool electrode during the machining process. Further investigation of the micro-EDM process in three dimensions leads to important design rules, specifically the smallest feature size attainable by the process.

Chandrasekar, Srinivasan Dr. (.School of Industrial Engineering, West Lafayette, IN); Moylan, Shawn P. (School of Industrial Engineering, West Lafayette, IN); Benavides, Gilbert Lawrence

2005-09-01T23:59:59.000Z

315

The Nano-Micro Interface Bridging the Micro  

E-Print Network [OSTI]

The Nano-Micro Interface Bridging the Micro and Nano Worlds. Edited by Hans-Jörg Fecht and Matthias- tion among researchers. The book The Nano-Micro Interface: Bridging the Micro and Nano Worlds fills one of these gaps. More specifically, this book, as its subtitle indicates, bridges the micro and nano worlds

Cao, Guozhong

316

Integrated Micro Nano Systems Integrated Micro Nano Systems  

E-Print Network [OSTI]

#12;Integrated Micro Nano Systems 2 #12;Integrated Micro Nano Systems 3 Val Jones (Ed.) Symposium on Integrated Micro Nano Systems: Convergence of bio and nanotechnologies, Enschede, The Netherlands, June 2006 Micro Nano Systems 4 #12;Integrated Micro Nano Systems 5 Preface In order to explore the convergence

Al Hanbali, Ahmad

317

MicroSight Optics  

ScienceCinema (OSTI)

MicroSight is an innovative gunsight technology that allows a marksman's eye to focus on both the front gunsight and the intended target. The MicroSight improves both firearm safety and performance by imaging two objects at different focal distances. The MicroSight was developed at Idaho National Laboratory, and has been licensed by Apollo Optical Systems. You can learn more about INL's research programs at http://www.facebook.com/idahonationallaboratory.

None

2013-05-28T23:59:59.000Z

318

Micro-unmanned aerodynamic vehicle  

DOE Patents [OSTI]

A MEMS-based micro-unmanned vehicle includes at least a pair of wings having leading wing beams and trailing wing beams, at least two actuators, a leading actuator beam coupled to the leading wing beams, a trailing actuator beam coupled to the trailing wing beams, a vehicle body having a plurality of fulcrums pivotally securing the leading wing beams, the trailing wing beams, the leading actuator beam and the trailing actuator beam and having at least one anisotropically etched recess to accommodate a lever-fulcrum motion of the coupled beams, and a power source.

Reuel, Nigel (Rio Rancho, NM); Lionberger, Troy A. (Ann Arbor, MI); Galambos, Paul C. (Albuquerque, NM); Okandan, Murat (Albuquerque, NM); Baker, Michael S. (Albuquerque, NM)

2008-03-11T23:59:59.000Z

319

PowerPoint Presentation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

* No cold or centrifugation steps * Power draw is minimal RNA Prep Module: Digital Microfluidics (DMF) with Macro-to-Micro Fluidic Interface Jebrail MJ et al., Anal Chem 86:3856...

320

Development of a liquid-fueled micro-combustor  

E-Print Network [OSTI]

Advances in Micro-Electro-Mechanical Systems (MEMS) have made possible the development of shirtbutton-sized gas turbine engines for use as portable power sources. As part of an effort to develop a microscale gas turbine ...

Peck, Jhongwoo, 1976-

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Renewables for the Power Rangan Banerjee  

E-Print Network [OSTI]

CONVERSION FACILITY SECONDARY ENERGY TRANSMISSION & DISTRN. SYSTEM FINAL ENERGY ENERGY UTILISATION EQUIPMENT & SYSTEMS USEFUL ENERGY END USE ACTIVITIES (ENERGY SERVICES) COAL, OIL, SOLAR, GAS POWER PLANT, REFINERIES (33%) Total 20500 PJ 19700 PJ (-non energy) Hydro 2.4% Coal 51.7% Oil (D) 9.8% Oil Import 24.9% Nat

Banerjee, Rangan

322

Climate Change, Nuclear Power and Nuclear  

E-Print Network [OSTI]

Climate Change, Nuclear Power and Nuclear Proliferation: Magnitude Matters Rob Goldston MIT IAP plays a large role in replacing coal red plants. al hydro electricity options penetrate in the climate way across scenarios, showing a slight severe climate targets. In Industry, the climate target has

323

Department of Energy Bonneville Power Administration  

E-Print Network [OSTI]

levels for the Action Agencies' implementation of the Pacific Northwest Electric Power and Conservation each of these agencies, states, and tribes to submit complementary recommendations under separate cover ­ to protect, mitigate and enhance fish and wildlife affected by federal and FERC-licensed hydro projects while

324

American Institute of Aeronautics and Astronautics Numerical Solutions for Ultra-Micro Wave Rotors (UWR)  

E-Print Network [OSTI]

, 48824 Starting in 1995, with the MIT "Micro Gas Turbine" project, the mechanical engineering research to an ultra-micro gas turbine. It discusses the advantages of wave rotor as topping units for gas turbines. Introduction ltra Micro Gas Turbines (UµGT) are expected to be the next generation of power source for any

Müller, Norbert

325

ICEPT Working Paper Comparison of Fuel Cell and Combustion Micro-CHP under Future Residential  

E-Print Network [OSTI]

ICEPT Working Paper Comparison of Fuel Cell and Combustion Micro-CHP under Future Residential and Combustion Micro-CHP under Future Residential Energy Demand Scenarios A.D. Hawkes2 and M.A. Leach Centre heat and power (micro-CHP) - a technology to provide heat and some electricity to individual

326

Improved computer models support genetics research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

played key role Scientist Marvin Salazar (left) checks the electric power output of a micro hydro generator for the Elephant Butte Irrigation District near Hatch, New Mexico....

327

Revue. Volume X n x/anne, pages 1 X Comportement thermo-hydro-mcanique  

E-Print Network [OSTI]

Revue. Volume X ­ n° x/année, pages 1 à X Comportement thermo-hydro-mécanique (THM) d'un ouvrage en'évaluer les risques de la dégradation de la pierre dues aux couplages thermo-hydro-mécaniques qui conduisent à'année 2008 par une station météo aérienne située proche du château. Les analyses couplées thermo-hydro

Paris-Sud XI, Université de

328

Scenario Reduction and Scenario Tree Construction for Power Management Problems  

E-Print Network [OSTI]

to hydro units, and fuel and electricity prices). For most practical problems the optimization problem and optimization techniques for the generation and trading of electric power under uncertainty. Utilities partic optimization models for the operation and plan- ning of power utilities use scenarios to deal with uncertainty

Römisch, Werner

329

Ris-R-1118(EN) Power Control for Wind Tur-  

E-Print Network [OSTI]

to increase the wind energy penetration. The main options are to combine wind power with a pumped hydro power been developed to assess that. The economic investigations have shown that for small systems where only small amounts of wind energy would otherwise have been dumped add-on PQ- controllers with battery

330

Topic 5: Renewable Power 1Networking and Distributed Systems  

E-Print Network [OSTI]

in Smart Grid 3 · We are interested in power plants with low carbon footprint: · Both CO2 and CH4 in Smart Grid 5 · Carbon footprint is also defined for power plants: · Conventional coal combustion has. · Desired choices (Renewable Sources): · Marine: Wave and Tidal · PV: Solar · Wind · Hydro #12;Carbon Tax Dr

Mohsenian-Rad, Hamed

331

Quantifying mortal injury of juvenile Chinook salmon exposed to simulated hydro-turbine passage  

SciTech Connect (OSTI)

A proportion of juvenile Chinook salmon and other salmonids travel through one or more turbines during seaward migration in the Columbia and Snake River every year. Despite this understanding, limited information exists on how these fish respond to hydraulic pressures found during turbine passage events. In this study we exposed juvenile Chinook salmon to varied acclimation pressures and subsequent exposure pressures (nadir) to mimic the hydraulic pressures of large Kaplan turbines (ratio of pressure change). Additionally, we varied abiotic (total dissolved gas, rate of pressure change) and biotic (condition factor, fish length, fish weight) factors that may contribute to the incidence of mortal injury associated with fish passing through hydro-turbines. We determined that the main factor associated with mortal injury of juvenile Chinook salmon during simulated turbine passage was the ratio between acclimation and nadir pressures. Condition factor, total dissolved gas, and the rate of pressure change were found to only slightly increase the predictive power of equations relating probability of mortal injury to conditions of exposure or characteristics of test fish during simulated turbine passage. This research will assist engineers and fisheries managers in operating and improving hydroelectric facility efficiency while minimizing mortality and injury of turbine-passed juvenile Chinook salmon. The results are discussed in the context of turbine development and the necessity of understanding how different species of fish will respond to the hydraulic pressures of turbine passage.

Brown, Richard S.; Carlson, Thomas J.; Gingerich, Andrew J.; Stephenson, John R.; Pflugrath, Brett D.; Welch, Abigail E.; Langeslay, Mike; Ahmann, Martin L.; Johnson, Robert L.; Skalski, John R.; Seaburg, Adam; Townsend, Richard L.

2012-02-01T23:59:59.000Z

332

A comparative analysis of accident risks in fossil, hydro, and nuclear energy chains  

SciTech Connect (OSTI)

This study presents a comparative assessment of severe accident risks in the energy sector, based on the historical experience of fossil (coal, oil, natural gas, and LPG (Liquefied Petroleum Gas)) and hydro chains contained in the comprehensive Energy-related Severe Accident Database (ENSAD), as well as Probabilistic Safety Assessment (PSA) for the nuclear chain. Full energy chains were considered because accidents can take place at every stage of the chain. Comparative analyses for the years 1969-2000 included a total of 1870 severe ({>=} 5 fatalities) accidents, amounting to 81,258 fatalities. Although 79.1% of all accidents and 88.9% of associated fatalities occurred in less developed, non-OECD countries, industrialized OECD countries dominated insured losses (78.0%), reflecting their substantially higher insurance density and stricter safety regulations. Aggregated indicators and frequency-consequence (F-N) curves showed that energy-related accident risks in non-OECD countries are distinctly higher than in OECD countries. Hydropower in non-OECD countries and upstream stages within fossil energy chains are most accident-prone. Expected fatality rates are lowest for Western hydropower and nuclear power plants; however, the maximum credible consequences can be very large. Total economic damages due to severe accidents are substantial, but small when compared with natural disasters. Similarly, external costs associated with severe accidents are generally much smaller than monetized damages caused by air pollution.

Burgherr, P.; Hirschberg, S. [Paul Scherrer Institute, Villigen (Switzerland)

2008-07-01T23:59:59.000Z

333

Interpretation of the Helix Planetary Nebula using Hydro-Gravitational Theory  

E-Print Network [OSTI]

Wide angle Hubble Space Telescope (HST/ACS) images of the Helix Planetary Nebula (NGC 7293) are interpreted using the hydro-gravitational theory (HGT) of Gibson 1996-2000 that predicts the baryonic dark matter and interstellar medium (ISM) consists of Mars-mass primordial-fog-particle (PFP) frozen H-He planets. The new ACS images confirm and extend the O'Dell and Handron 1996 WFPC2 images showing thousands of cometary globules, which we suggest are cocoons of PFP and Jupiter frozen-gas-planets evaporated by powerful beamed radiation from the hot central white dwarf and its companion. The atmosphere mass of the largest cometary globules is ~ 3x10^{25} kg with spacing ~ 10^{14} m, supporting the prediction of HGT that the mass density of the ISM in Galaxy star forming regions should match the large baryonic primordial value at the time of first structure formation (10^{12} s or 30,000 years), with \\rho ~ (3-1)x 10^{-17} kg m^{-3}.

Carl H. Gibson; Rudolph E. Schild

2003-06-25T23:59:59.000Z

334

Interpretation of the Helix Planetary Nebula using Hydro-Gravitational-Dynamics: Planets and Dark Energy  

E-Print Network [OSTI]

Hubble Space Telescope images of the Helix Planetary Nebula are interpreted using the hydro-gravitational-dynamics theory (HGD) of Gibson 1996-2006. HGD claims that baryonic-dark-matter (BDM) dominates the halo masses of galaxies (Schild 1996) as Jovian (Primordial-fog-particle [PFP]) Planets (JPPs) in proto-globular-star-cluster (PGC) clumps for all galaxy halo diameters bounded by stars. From HGD, supernova Ia (SNe Ia) events always occur in planetary nebulae (PNe) within PGCs. The dying central star of a PNe slowly accretes JPP mass to grow the white-dwarf to instability. Plasma jets, winds and radiation driven by contraction and spin-up of the carbon star evaporate JPPs revealing its Oort accretional cavity. SNe Ia events may thus be obscured or not obscured by radiation-inflated JPP atmospheres producing systematic SNe Ia distance errors, so the otherwise mysterious ``dark energy'' concept is unnecessary. HST/ACS and WFPC2 Helix images show >7,000 cometary globules and SST/IRAC images show >20,000-40,000, here interpreted as gas-dust cocoons of JPPs evaporated by the spin powered radiation of the PNe central white-dwarf. Observed JPP masses fossilizes the primordial density existing when the plasma universe fragmented into proto-superclusters, proto-clusters, and proto-galaxies. Pulsar scintillation spectra support the postulated multi-planet atmospheres.

Carl H. Gibson; Rudolph E. Schild

2007-11-02T23:59:59.000Z

335

Micro Power Electronics Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 -Energieprojekte GmbH Jump to:Michigan: Energy Resources Jump to:Electronics Inc

336

Micro Power Trading Co | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 -Energieprojekte GmbH Jump to:Michigan: Energy Resources Jump to:Electronics

337

MicroPower Global | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 -Energieprojekte GmbH Jump to:Michigan: Energy Resources JumpEnergy|

338

Sandia National Laboratories: micro power source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1developmentturbine bladelifetime is the cumulativeissuesmetamaterial Newmicro

339

Volume reduction/solidification of liquid radioactive waste using bitumen at Ontario hydro`s Bruce nuclear generating station {open_quotes}A{close_quotes}  

SciTech Connect (OSTI)

Ontario Hydro at the Bruce Nuclear Generating Station {open_quotes}A{close_quotes} has undertaken a program to render the station`s liquid radioactive waste suitable for discharge to Lake Huron by removing sufficient radiological and chemical contaminants from five different plant waste streams. The contaminants will be immobilized and stored at on-site radioactive waste storage facilities and the purified streams will be discharged. The discharge targets established by Ontario Hydro are set well below the limits established by the Ontario Ministry of Environment (MOE) and are based on the Best Available Technology Economically Achievable Approach (B.A.T.E.A.). ADTECHS Corporation has been selected by Ontario Hydro to provide volume reduction/solidification technology for one of the five waste streams. The system will dry and immobilize the contaminants from a liquid waste stream in emulsified asphalt using thin film evaporation technology.

Day, J.E.; Baker, R.L. [ADTECHS Corporation, Herndon, VA (United States)

1994-12-31T23:59:59.000Z

340

Bangor Hydro Electric Company- Residential and Small Commercial Heat Pump Program (Maine)  

Broader source: Energy.gov [DOE]

Bangor Hydro Electric Company offers a two-tiered incentive program for residential and small commercial customers. Mini-Split Heat Pumps are eligible for a rebate of $600, as well as a loan to...

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Hydro-Québec Distribution- Biomass- EAP 2011-1 (Quebec, Canada)  

Broader source: Energy.gov [DOE]

Hydro-Québec Distribution established a program for the purchase of 300 MW of electricity in Quebec from cogeneration based residual forest biomass. Each project is limited to a maximum of 50 MW....

342

A Geological and Hydro-Geochemical Study of the Animas Geothermal...  

Open Energy Info (EERE)

Hydro-Geochemical Study of the Animas Geothermal Area, Hidalgo County, New Mexico Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: A Geological...

343

BC Hydro Industrial Sector: Marketing Sector Marketing Plan (Fiscal 2005/Fiscal 2006)  

E-Print Network [OSTI]

BC Hydro, the major electricity utility in the Province of British Columbia has been promoting industrial energy efficiency for more than 15 years. Recently it has launched a new Demand Side Management initiative with the objective of obtaining 2000...

Willis, P.; Wallace, K.

2005-01-01T23:59:59.000Z

344

Impact of land use change on a hydro-meteorological event in Kampala, Uganda  

E-Print Network [OSTI]

Impact of land use change on a hydro-meteorological event in Kampala, Uganda Problem statement Kampala is the capital city of Uganda on the northern shores of Lake Victoria. Here, future climate change

Jetten, Victor

345

Hydro-Quebec Sustainable Development Action Plan 2009-2013 (Quebec, Canada)  

Broader source: Energy.gov [DOE]

To meet the requirements set out in the Québec government’s Sustainable Development Strategy and strategy to ensure the occupancy and vitality of territories, Hydro-Québec has established a...

346

Polymers with hydro-responsive topography identified using high throughput AFM of an acrylate microarray  

E-Print Network [OSTI]

Atomic force microscopy has been applied to an acrylate polymer microarray to achieve a full topographic characterisation. This process discovered a small number of hydro-responsive materials created from monomers with ...

Hook, Andrew L.

347

Pacific Northwest Power Supply Adequacy Assessment  

E-Print Network [OSTI]

, about 1,200 megawatts of new wind capacity and about 250 megawatts of small hydro and hydro upgrades

348

Review of Strategies and Technologies for Demand-Side Management on Isolated Mini-Grids  

E-Print Network [OSTI]

approach to community micro hydro in Kalahandi, Orissa. Santechnologies, such as micro-hydro, biomass gasification,grids, such as many micro-hydro grids, will mainly concern

Harper, Meg

2014-01-01T23:59:59.000Z

349

Optimizing Dam Operations for Power and for Fish: an Overview of the US Department of Energy and US Army Corps of Engineers ADvanced Turbine Development R&D. A Pre-Conference Workshop at HydroVision 2006, Oregon Convention Center, Portland, Oregon July 31, 2006  

SciTech Connect (OSTI)

This booklet contains abstracts of presentations made at a preconference workshop on the US Department of Energy and US Army Corps of Engineers hydroturbine programs. The workshop was held in conjunction with Hydrovision 2006 July 31, 2006 at the Oregon Convention Center in Portland Oregon. The workshop was organized by the Corps of Engineers, PNNL, and the DOE Wind and Hydropower Program. Presenters gave overviews of the Corps' Turbine Survival Program and the history of the DOE Advanced Turbine Development Program. They also spoke on physical hydraulic models, biocriteria for safe fish passage, pressure investigations using the Sensor Fish Device, blade strike models, optimization of power plant operations, bioindex testing of turbine performance, approaches to measuring fish survival, a systems view of turbine performance, and the Turbine Survival Program design approach.

Dauble, Dennis D.

2006-08-01T23:59:59.000Z

350

Road Map for Renewables Rangan Banerjee  

E-Print Network [OSTI]

for Storage, Additional Cost #12;Renewable Energy Options Wind Solar Small Hydro Biomass Tidal Energy Wave for Solar power #12;Small Hydro Power Classification - based on Capacity -Micro less than 100 kW -Mini 100 k viable 1997 660 GW 2600TWh Hydro (23 GW 90 TWh small

Banerjee, Rangan

351

Profit Maximization of a Power Plant Martin Kragelund, John Leth, Rafal Wisniewski, and Ulf Jonsson  

E-Print Network [OSTI]

[16]. Furthermore, optimal steady state operations have been studied [3]. In [8], the hydro power power plant will be con- sidered, and optimal control will be used for the profit optimization [19], [21]. A problem of the optimal operation of a power plant in a liberal electricity market is a subject of [20

Hansen, René Rydhof

352

Power Electronics and Controls for Wind Turbine F. Blaabjerg, F. Iov, Z. Chen, K. Ma  

E-Print Network [OSTI]

was in the beginning based on a squirrel-cage induction generator connected directly to the grid. Power pulsations technologies used in wind turbine systems. I. INTRODUCTION In classical power systems, large power generation such as wind turbines, wave generators, photovoltaic (PV) generators, small hydro, fuel cells and gas

Chen, Zhe

353

Theory for hydrostatic gas journal bearings for micro-electro-mechanical systems  

E-Print Network [OSTI]

The goal of the MIT micro-engine project is to develop high-speed rotating Power MEMS (Micro-Electro-Mechanical Systems) using computer chip fabrication technologies. To produce high power (10-50 W) in a small volume (less ...

Liu, Lixian, Ph. D. Massachusetts Institute of Technology

2005-01-01T23:59:59.000Z

354

Stresa, Italy, 26-28 April 2006 RECENT DEVELOPMENTS IN MEMS-BASED MICRO FUEL CELLS  

E-Print Network [OSTI]

cell achieved a maximum power density of 58 mW cm-2 at room temperature with hydrogen as fuel. 1Stresa, Italy, 26-28 April 2006 RECENT DEVELOPMENTS IN MEMS-BASED MICRO FUEL CELLS Tristan Pichonat ABSTRACT Micro fuel cells (µ-FC) represent promising power sources for portable applications. Today, one

Boyer, Edmond

355

Vortex Hydro Energy (TRL 5 6 System) - Advanced Integration of...  

Broader source: Energy.gov (indexed) [DOE]

- PB500, 500 kW Utility-Scale PowerBuoy Project WaveBob (TRL 5 6 System) - Advanced Wave Energy Conversion Project Water Power Program About the Program Research &...

356

Assessing the Feasibility of Pico Hydro Technology on TESC  

E-Print Network [OSTI]

;Objective/Motivation · Hydroelectric Power is very clean on small scales · Pacific NW: Lots of water Measure the flow of the stream to estimate the available hydroelectric power #12;Stream Flow Measurements

357

Congrs SHF : Environnement et Hydro-lectricit , Lyon,6 & 7 octobre 2010 Pigay, Aelbrecht, Beal RESTAURATION MORPHO-DYNAMIQUE ET  

E-Print Network [OSTI]

Congrès SHF : « Environnement et Hydro-électricité », Lyon,6 & 7 octobre 2010 ­Piégay, Aelbrecht pour la protection contre les crues et la navigation, puis après la construction de barrages hydro deux projets est de définir un plan de restauration hydro-morphologique et écologique conduisant à la

Paris-Sud XI, Université de

358

An Agent Based Simulation of Smart Metering Technology Adoption  

E-Print Network [OSTI]

domestic Combined Heat and Power unit which produces electricity and heat simultaneously), micro-hydro, micro-wind and photovoltaics. The benefits of wind, solar and hydro micro-generation are the zero fuel cost and that the technologies are carbon free...

Zhang, Tao; Nuttall, William J

359

Mediated Enzyme Electrodes with Combined Micro-and Nanoscale Supports  

E-Print Network [OSTI]

Mediated Enzyme Electrodes with Combined Micro- and Nanoscale Supports Scott Calabrese Barton which is grown multiwall nanotubes by chemical vapor deposition combined with ohmic heating. Power systems based on ambient fuels will be feasible if the power device itself is capable

Hone, James

360

WIND ATLAS FOR EGYPT: MEASUREMENTS, MICRO-AND MESOSCALE MODELLING  

E-Print Network [OSTI]

sets for evaluating the potential wind power output from large electricity-producing wind turbine and accurate wind atlas data sets for evaluating the potential wind power output from large electricityWIND ATLAS FOR EGYPT: MEASUREMENTS, MICRO- AND MESOSCALE MODELLING Niels G. Mortensen1 , Jens

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Micro heat barrier  

DOE Patents [OSTI]

A highly effective, micron-scale micro heat barrier structure and process for manufacturing a micro heat barrier based on semiconductor and/or MEMS fabrication techniques. The micro heat barrier has an array of non-metallic, freestanding microsupports with a height less than 100 microns, attached to a substrate. An infrared reflective membrane (e.g., 1 micron gold) can be supported by the array of microsupports to provide radiation shielding. The micro heat barrier can be evacuated to eliminate gas phase heat conduction and convection. Semi-isotropic, reactive ion plasma etching can be used to create a microspike having a cusp-like shape with a sharp, pointed tip (<0.1 micron), to minimize the tip's contact area. A heat source can be placed directly on the microspikes. The micro heat barrier can have an apparent thermal conductivity in the range of 10.sup.-6 to 10.sup.-7 W/m-K. Multiple layers of reflective membranes can be used to increase thermal resistance.

Marshall, Albert C.; Kravitz, Stanley H.; Tigges, Chris P.; Vawter, Gregory A.

2003-08-12T23:59:59.000Z

362

Method of fabricating a micro machine  

DOE Patents [OSTI]

A micro machine may be in or less than the micrometer domain. The micro machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft is operable to be driven by the micro actuator. A tool is coupled to the micro shaft and is operable to perform work in response to at least motion of the micro shaft.

Stalford, Harold L

2014-11-11T23:59:59.000Z

363

Hydro-Gravitational-Dynamics of Planets and Dark Energy  

E-Print Network [OSTI]

Self-gravitational fluid mechanical methods termed hydro-gravitational-dynamics (HGD) predict plasma fragmentation 0.03 Myr after the turbulent big bang to form protosuperclustervoids, turbulent protosuperclusters, and protogalaxies at the 0.3 Myr transition from plasma to gas. Linear protogalaxyclusters fragment at 0.003 Mpc viscous-inertial scales along turbulent vortex lines or in spirals, as observed. The plasma protogalaxies fragment on transition into white-hot planet-mass gas clouds (PFPs) in million-solar-mass clumps (PGCs) that become globular-star-clusters (GCs) from tidal forces or dark matter (PGCs) by freezing and diffusion into 0.3 Mpc halos with 97% of the galaxy mass. The weakly collisional non-baryonic dark matter diffuses to > Mpc scales and frag-ments to form galaxy cluster halos. Stars and larger planets form by binary mergers of the trillion PFPs per PGC on 0.03 Mpc galaxy accretion disks. Star deaths depend on rates of planet accretion and internal star mixing. Moderate accretion rates produce white dwarfs that evaporate surrounding gas planets by spin-radiation to form planetary nebulae before Supernova Ia events, dimming some events to give systematic distance errors misinterpreted as the dark energy hypothesis and overestimates of the universe age. Failures of standard LCDM cosmological models reflect not only obsolete Jeans 1902 fluid mechanical assumptions, but also failures of standard turbulence models that claim the cascade of turbulent kinetic energy is from large scales to small. Because turbulence is always driven at all scales by inertial-vortex forces the turbulence cascade is always from small scales to large.

Carl H. Gibson; Rudolph E. Schild

2008-08-24T23:59:59.000Z

364

Technologies for Sustainable  

E-Print Network [OSTI]

energy 29 Bioethanol 31 Solar energy 33 Fuel cells 35 Hydro and wave power 37 Geothermal energy 39 Energy Efficiency 40 Energy-efficient power plants 41 Combined heat and power 43 Micro combined heat and power 45

365

Micro-machined resonator  

DOE Patents [OSTI]

A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

Godshall, Ned A. (Albuquerque, NM); Koehler, Dale R. (Albuquerque, NM); Liang, Alan Y. (Albuquerque, NM); Smith, Bradley K. (Albuquerque, NM)

1993-01-01T23:59:59.000Z

366

Micro-machined resonator  

DOE Patents [OSTI]

A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

Godshall, N.A.; Koehler, D.R.; Liang, A.Y.; Smith, B.K.

1993-03-30T23:59:59.000Z

367

Miniature modified Faraday cup for micro electron beams  

DOE Patents [OSTI]

A micro beam Faraday cup assembly includes a refractory metal layer with an odd number of thin, radially positioned traces in this refractory metal layer. Some of the radially positioned traces are located at the edge of the micro modified Faraday cup body and some of the radially positioned traces are located in the central portion of the micro modified Faraday cup body. Each set of traces is connected to a separate data acquisition channel to form multiple independent diagnostic networks. The data obtained from the two diagnostic networks are combined and inputted into a computed tomography algorithm to reconstruct the beam shape, size, and power density distribution.

Teruya, Alan T. (Livermore, CA); Elmer, John W. (Danville, CA); Palmer, Todd A. (Livermore, CA); Walton, Chris C. (Berkeley, CA)

2008-05-27T23:59:59.000Z

368

Multiproject baselines for evaluation of electric power projects  

E-Print Network [OSTI]

Load-Following Gas turbine, small hydro Load-Following Buildprojects consist entirely of small hydro stations. Since theall zero because only small hydro stations have been built

2003-01-01T23:59:59.000Z

369

Battery-Powered Digital CMOS Massoud Pedram  

E-Print Network [OSTI]

(submarines) Stationary batteries 250 Wh~5 MWh Emergency power supplies, local energy storage, remote relay1 Page 1 USC Low Power CAD Massoud Pedram Battery-Powered Digital CMOS Design Massoud Pedram Power CAD Massoud Pedram Motivation Extending the battery service life of battery-powered micro

Pedram, Massoud

370

Development of HydroImage, A User Friendly Hydrogeophysical Characterization Software  

SciTech Connect (OSTI)

HydroImage, user friendly software that utilizes high-resolution geophysical data for estimating hydrogeological parameters in subsurface strate, was developed under this grant. HydroImage runs on a personal computer platform to promote broad use by hydrogeologists to further understanding of subsurface processes that govern contaminant fate, transport, and remediation. The unique software provides estimates of hydrogeological properties over continuous volumes of the subsurface, whereas previous approaches only allow estimation of point locations. thus, this unique tool can be used to significantly enhance site conceptual models and improve design and operation of remediation systems. The HydroImage technical approach uses statistical models to integrate geophysical data with borehole geological data and hydrological measurements to produce hydrogeological parameter estimates as 2-D or 3-D images.

Mok, Chin Man [GSI Environmental] [GSI Environmental; Hubbard, Susan [Lawrence Berkeley National Laboratory] [Lawrence Berkeley National Laboratory; Chen, Jinsong [Lawrence Berkeley National Laboratory] [Lawrence Berkeley National Laboratory; Suribhatla, Raghu [AMEC E& I] [AMEC E& I; Kaback, Dawn Samara [AMEC E& I] [AMEC E& I

2014-01-29T23:59:59.000Z

371

Initial Northwest Power Act Power Sales Contracts : Final Environmental Impact Statement. Volume 2, Appendices A--L.  

SciTech Connect (OSTI)

This report consists of appendices A-L of the final environmental impact statement for the Bonneville Power Administration. The appendices provide information on the following: Ninth circuit Court opinion in Forelaws on Board v. Johnson; guide to Northwest Power act contracts; guide to hydro operations; glossary; affected environment supporting documentation; environmental impacts of generic resource types; information on models used; technical information on analysis; public involvement activities; bibliography; Pacific Northwest Electric Power Planning and Conservation Act; and biological assessment. (CBS)

United States. Bonneville Power Administration.

1992-01-01T23:59:59.000Z

372

Abstract-Coal and hydro will be the main sources of electric energy in Chile for the near future, given that natural gas  

E-Print Network [OSTI]

Abstract- Coal and hydro will be the main sources of electric energy in Chile for the near future and the environmental dilemma faced by the country, where both coal and hydro produce some kind of impact. The role

Dixon, Juan

373

Proposition de sujet de Thse de Doctorat Caractrisation multi chelle des proprits hydro-go-physiques des  

E-Print Network [OSTI]

Proposition de sujet de Thèse de Doctorat Caractérisation multi échelle des propriétés hydro structurales et ainsi développer des méthodologies d'acquisition hydro-géo-physique en ce milieu complexe

Naud Frédéric

374

Hydro-economic models: Concepts, design, applications, and future prospects Julien J. Harou a,*, Manuel Pulido-Velazquez b  

E-Print Network [OSTI]

Review Hydro-economic models: Concepts, design, applications, and future prospects Julien J. Harou Engineering, University College London, Pearson Building, Gouwer Street, London, UK b Departamento de of Frank Ward, Associate Editor Keywords: Hydro-economic models Integrated water resource management (IWRM

Pasternack, Gregory B.

375

Breakthrough: micro-electronic photovoltaics  

SciTech Connect (OSTI)

Sandia developed tiny glitter-sized photovoltaic (PV) cells that could revolutionize solar energy collection. The crystalline silicon micro-PV cells will be cheaper and have greater efficiencies than current PV collectors. Micro-PV cells require relatively little material to form well-controlled, highly efficient devices. Cell fabrication uses common microelectric and micro-electromechanical systems (MEMS) techniques.

Okandan, Murat; Gupta, Vipin

2012-04-23T23:59:59.000Z

376

Breakthrough: micro-electronic photovoltaics  

ScienceCinema (OSTI)

Sandia developed tiny glitter-sized photovoltaic (PV) cells that could revolutionize solar energy collection. The crystalline silicon micro-PV cells will be cheaper and have greater efficiencies than current PV collectors. Micro-PV cells require relatively little material to form well-controlled, highly efficient devices. Cell fabrication uses common microelectric and micro-electromechanical systems (MEMS) techniques.

Okandan, Murat; Gupta, Vipin

2014-06-23T23:59:59.000Z

377

Evaluation of fossil plants versus hydro plants for load frequency control  

SciTech Connect (OSTI)

The economics of using hydroplants with Francis turbines or fossil plants for load frequency control are evaluated. Using data from the TVA Gallatin steam plant and the TVA Cherokee, Wilson, and Fontana hydroplants, a cost comparison of different modes of operation for load frequency control was performed considering two plants at a time. The results showed that when the fossil plant was used for load frequency control instead of a hydro plant a lower system generation cost was incurred. Dynamic responses of fossil and hydro units, improved controls for fossil plants, and maneuvering costs of the Gallatin plant are also considered.

Broadwater, R.P.; Johnson, R.L.; Duckett, F.E.; Boston, W.T.

1985-01-01T23:59:59.000Z

378

A Hydro-mechanical Model and Analytical Solutions for Geomechanical Modeling of Carbon Dioxide Geological Sequestration  

SciTech Connect (OSTI)

We present a hydro-mechanical model for geological sequestration of carbon dioxide. The model considers the poroelastic effects by taking into account the coupling between the geomechanical response and the fluid flow in greater detail. The simplified hydro-mechanical model includes the geomechanical part that relies on the linear elasticity, while the fluid flow is based on the Darcy’s law. Two parts were coupled using the standard linear poroelasticity. Analytical solutions for pressure field were obtained for a typical geological sequestration scenario. The model predicts the temporal and spatial variation of pressure field and effects of permeability and elastic modulus of formation on the fluid pressure distribution.

Xu, Zhijie; Fang, Yilin; Scheibe, Timothy D.; Bonneville, Alain

2012-05-15T23:59:59.000Z

379

86 Home Power #50 December 1995 / January 1996 Code Corner  

E-Print Network [OSTI]

. The power sources include the PV array, the battery bank, a backup generator, a wind turbine, a hydro the charge controller, the inverter, separate low-voltage disconnect devices, and external battery chargers require a main PV disconnect, a main battery disconnect, a main backup generator disconnect, and a main

Johnson, Eric E.

380

A PV Powered BWRO Desalination Installation with Energy Recovery and Hydro-Pneumatic Energy Storage:.  

E-Print Network [OSTI]

??This MSc. Thesis project was performed at the Sanitary Engineering Department of the TU Delft as part of the Sustainable Energy Technology program. It is… (more)

Romero, R.G.C.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Efficient bidding for hydro power plants in markets for energy and ancillary services  

E-Print Network [OSTI]

In order to preserve stability of electricity supply generators must provide ancillary services in addition to energy production. Hydroelectric resources have significant ancillary service capability because of their dynamic ...

Perekhodtsev, Dmitri

2006-01-01T23:59:59.000Z

382

HydroPower: How Electricity gets from the River to Your House  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun withconfinement plasmasSandy-Nor'easterStatistical Self-Similarity in

383

Hydrogen Resource Assessment: Hydrogen Potential from Coal, Natural Gas, Nuclear, and Hydro Power  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun withconfinementEtching. | EMSL Bubbles andof the Trough and its60-42773

384

Microsoft PowerPoint - Bryan Hydro Conf 11 Jun 09.ppt  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping theEnergyInnovationMichaelGE1PlanARM A. Gannet505BPPowerDistrict

385

Microsoft PowerPoint - Entergy-Hydro-Operations_Smethers [Compatibility Mode]  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping Richland Operations Office SiteOuachita River System LAKE

386

Microsoft PowerPoint - SW Fed Hydro Conference Jun 12 presentation Final [Compatibility Mode]  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping Richland OperationsU.S.OnlineTank ClosureProjects Impacting

387

Microsoft PowerPoint - Sub-agreement Status June 2007 Hydro Conf 053007.ppt  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping Richland OperationsU.S.OnlineTank09 Little27,Earl Res lts3, 2007

388

Microsoft PowerPoint - Sub-agreement Status June 2008 Hydro Conf 061208.ppt  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping Richland OperationsU.S.OnlineTank09 Little27,Earl Res lts3,

389

Microsoft PowerPoint - Webbers Hydro Conf 13 Jun 07.ppt  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping RichlandScattering Properties of AggregatesVirginia9/2007 1 US

390

Microsoft PowerPoint - Webbers Hydro Conf 13a Jun 08.ppt  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping RichlandScattering Properties of AggregatesVirginia9/2007 1

391

HydroVenturi Ltd previously RV Power Company Ltd | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat Jump to:PhotonHolyName HousingIII WindHybrids Plus

392

Curriculum Vitae Sagar Prasad Parajuli SAGAR PRASAD PARAJULI  

E-Print Network [OSTI]

of over 20 potential micro-hydro projects Performed preliminary design of surveyed micro-hydro projects

Yang, Zong-Liang

393

Mobile Persuasive Technologies for Rural Health  

E-Print Network [OSTI]

electricity (solar and micro-hydro) to all villages in thepartner NGO has implemented micro hydro systems in a handful

Ramachandran, Divya Lalitha

2010-01-01T23:59:59.000Z

394

Techno-economics of Renewables Rangan Banerjee  

E-Print Network [OSTI]

, Additional Cost #12;Renewable Energy Options Wind Solar Small Hydro Biomass Tidal Energy Wave Energy Ocean/Not Commercial (Total grid connected Small Hydro Power Classification - based on Capacity -Micro less connected Heads as low as 3 m viable 1997 660 GW 2600TWh Hydro (23 GW 90 TWh small

Banerjee, Rangan

395

Assessment of Alternative Energy Resources  

E-Print Network [OSTI]

, Additional Cost Characteristics of Renewables #12;Renewable Energy Options Wind Solar Small Hydro Biomass Cogeneration 379 60% 1992 Small Hydro 1603 50% 7021 Waste to Energy 41 70% 251 Solar PV 2.5 20% 4 4813 14171 Total grid connected Small Hydro Power Classification - based on Capacity -Micro less than 100

Banerjee, Rangan

396

Toward hydro-social modeling: Merging human variables and the social sciences with climate-glacier runoff models (Santa River, Peru)  

E-Print Network [OSTI]

Toward hydro-social modeling: Merging human variables and the social sciences with climate mountain range, this paper provides a holistic hydro-social framework that identifies five major human of watershed dynamics. This hydro-social framework has wide- spread implications for hydrological modeling

McKenzie, Jeffrey M.

397

Virtues of simple hydro-economic optimization: Baja California, Mexico J. Medellin-Azuara a,*, L.G. Mendoza-Espinosa b  

E-Print Network [OSTI]

Virtues of simple hydro-economic optimization: Baja California, Mexico J. Medelli´n-Azuara a,*, L in revised form 1 May 2009 Accepted 22 May 2009 Available online 26 June 2009 Keywords: Hydro-economic models simple hydro-economic optimization to investigate a wide range of regional water system management

Pasternack, Gregory B.

398

Long-term evaluation of the Hydro-Thermodynamic Soil-Vegetation Scheme's frozen ground/permafrost component using observations at  

E-Print Network [OSTI]

Long-term evaluation of the Hydro-Thermodynamic Soil-Vegetation Scheme's frozen ground/permafrost component of the hydro-thermodynamic soil-vegetation scheme (HTSVS) was evaluated by means of permafrost computational time. Citation: Mo¨lders, N., and V. E. Romanovsky (2006), Long-term evaluation of the Hydro

Moelders, Nicole

399

Hydro-climatology: Variability and Change (Proceedings of symposium J-H02 held during IUGG2011 in Melbourne, Australia, July 2011) (IAHS Publ. 344, 2011).  

E-Print Network [OSTI]

Hydro-climatology: Variability and Change (Proceedings of symposium J-H02 held during IUGG2011 in Melbourne, Australia, July 2011) (IAHS Publ. 344, 2011). Copyright © 2011 IAHS Press 195 How could hydro , L. COLLET2 , S. ARDOIN-BARDIN3 & P. ROUCOU4 1 CNRS, 2 UM2, 3 IRD ­ UMR HydroSciences Montpellier

Paris-Sud XI, Université de

400

Operational hydro-meteorological warning and real-time flood forecasting:the Piemonte region case study Hydrology and Earth System Sciences, 9(4), 457466 (2005) EGU  

E-Print Network [OSTI]

Operational hydro-meteorological warning and real-time flood forecasting:the Piemonte region case study 457 Hydrology and Earth System Sciences, 9(4), 457466 (2005) © EGU Operational hydro forecasting system in the context of the Piemonte Regions hydro-meteorological operational alert procedure

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Eco-Hydro-Climate Science/Engineering in SESE Definition: An emerging frontier in Earth system science is the interaction of ecological,  

E-Print Network [OSTI]

Eco-Hydro-Climate Science/Engineering in SESE Definition: An emerging frontier in Earth system that are `retooled' to treat the coupled eco-hydro-climate system. Arid and semiarid regions (deserts) are a fruitful Southwest is thus an ideal laboratory for eco-hydro-climate studies and provides several case studies

Rhoads, James

402

A FULLY COUPLED THERMO-HYDRO MECHANICAL ANALYSIS OF THE IMPACT OF TEMPERATURE AND HUMIDITY VARIATION ON THE STATE OF HISTORICAL STONE  

E-Print Network [OSTI]

A FULLY COUPLED THERMO-HYDRO MECHANICAL ANALYSIS OF THE IMPACT OF TEMPERATURE AND HUMIDITY Keywords: Thermo-hydro-mechanical coupling, modelling, inverse problem, tuffeau, monument, in situ measures initiation and growth due to the variation of climate conditions; thermo-hydro-mechanical incompatibility

Paris-Sud XI, Université de

403

The Need for Speed and Stability in Data Center Power Capping Arka A. Bhattacharya, David Culler  

E-Print Network [OSTI]

because from the power generation standpoint, the cost and environmental impact for large scale power generation plants such as hydro-electric plants as well as green energy installations such as solar or wind by pro- visioning expensive electrical equipment (such as UPS, diesel generators, and cooling capacity

Hunt, Galen

404

Price-based adaptive spinning reserve requirements in power system scheduling1  

E-Print Network [OSTI]

&E, the Hydro-Thermal Optimization (HTO) program was developed almost a decade ago, based on the LagrangianPrice-based adaptive spinning reserve requirements in power system scheduling1 Chung-Li Tsenga function, on a price/value signal. We present three power system scheduling algorithms in which this price

Oren, Shmuel S.

405

Low-Power Maximum Power Point Tracker with Digital Control for Thermophotovoltaic Generators  

E-Print Network [OSTI]

This paper describes the design, optimization, and evaluation of the power electronics circuitry for a low-power portable thermophotovotaic (TPV) generator system. TPV system is based on a silicon micro-reactor design and ...

Pilawa, Robert

406

Scanning micro-sclerometer  

DOE Patents [OSTI]

A scanning micro-sclerometer measures changes in contact stiffness and correlates these changes to characteristics of a scratch. A known force is applied to a contact junction between two bodies and a technique employing an oscillating force is used to generate the contact stiffness between the two bodies. As the two bodies slide relative to each other, the contact stiffness changes. The change is measured to characterize the scratch.

Oliver, Warren C. (Knoxville, TN); Blau, Peter J. (Oak Ridge, TN)

1994-01-01T23:59:59.000Z

407

Scanning micro-sclerometer  

DOE Patents [OSTI]

A scanning micro-sclerometer measures changes in contact stiffness and correlates these changes to characteristics of a scratch. A known force is applied to a contact junction between two bodies and a technique employing an oscillating force is used to generate the contact stiffness between the two bodies. As the two bodies slide relative to each other, the contact stiffness changes. The change is measured to characterize the scratch. 2 figs.

Oliver, W.C.; Blau, P.J.

1994-11-01T23:59:59.000Z

408

MICRO-CHP System for Residential Applications  

SciTech Connect (OSTI)

This is the final report of progress under Phase I of a project to develop and commercialize a micro-CHP system for residential applications that provides electrical power, heating, and cooling for the home. This is the first phase of a three-phase effort in which the residential micro-CHP system will be designed (Phase I), developed and tested in the laboratory (Phase II); and further developed and field tested (Phase III). The project team consists of Advanced Mechanical Technology, Inc. (AMTI), responsible for system design and integration; Marathon Engine Systems, Inc. (MES), responsible for design of the engine-generator subsystem; AO Smith, responsible for design of the thermal storage and water heating subsystems; Trane, a business of American Standard Companies, responsible for design of the HVAC subsystem; and AirXchange, Inc., responsible for design of the mechanical ventilation and dehumidification subsystem.

Joseph Gerstmann

2009-01-31T23:59:59.000Z

409

Autonomous, agile micro-satellites and supporting technologies  

SciTech Connect (OSTI)

This paper updates the on-going effort at Lawrence Livermore National Laboratory to develop autonomous, agile micro-satellites (MicroSats). The objective of this development effort is to develop MicroSats weighing only a few tens of kilograms, that are able to autonomously perform precision maneuvers and can be used telerobotically in a variety of mission modes. The required capabilities include satellite rendezvous, inspection, proximity-operations, docking, and servicing. The MicroSat carries an integrated proximity-operations sensor-suite incorporating advanced avionics. A new self-pressurizing propulsion system utilizing a miniaturized pump and non-toxic mono-propellant hydrogen peroxide was successfully tested. This system can provide a nominal 25 kg MicroSat with 200-300 m/s delta-v including a warm-gas attitude control system. The avionics is based on the latest PowerPC processor using a CompactPCI bus architecture, which is modular, high-performance and processor-independent. This leverages commercial-off-the-shelf (COTS) technologies and minimizes the effects of future changes in processors. The MicroSat software development environment uses the Vx-Works real-time operating system (RTOS) that provides a rapid development environment for integration of new software modules, allowing early integration and test. We will summarize results of recent integrated ground flight testing of our latest non-toxic pumped propulsion MicroSat testbed vehicle operated on our unique dynamic air-rail.

Breitfeller, E; Dittman, M D; Gaughan, R J; Jones, M S; Kordas, J F; Ledebuhr, A G; Ng, L C; Whitehead, J C; Wilson, B

1999-07-19T23:59:59.000Z

410

What does it take to create a clean energy future for Washington? Solar, Wind, Hydro  

E-Print Network [OSTI]

Solar, Wind, Hydro A Complete Energy System Home and Commercial Generation Demand Response 10-10 m 10's leadership and economic advantages in clean energy. - The mission of the Clean Energy Institute is to accelerate the adoption of a clean energy future by advancing next generation solar energy and electrical

Hochberg, Michael

411

HESSD '98 17 Safety concerns at Ontario Hydro: The need for safety  

E-Print Network [OSTI]

HESSD '98 17 Safety concerns at Ontario Hydro: The need for safety management through incident analysis and safety assessment John D. Lee Battelle Seattle Research Center 4000 NE 41st Street Seattle, WA Engineering University of Toronto benfica@mie.utoronto.ca Safety management and the long-term operation

Lee, John D.

412

Hydro-Mechanical Loading and Compressibility of Fibrous Media for Resin Infusion Processes  

E-Print Network [OSTI]

1 Hydro-Mechanical Loading and Compressibility of Fibrous Media for Resin Infusion Processes P investigating the compressibility behaviour of composite preform with a view of modelling resin infusion Infusion The need for manufacturing large composite parts in the aeronautic industry is ever increasing

Paris-Sud XI, Université de

413

MODELING OF HYDRO-PNEUMATIC ENERGY STORAGE USING PUMP TURBINES  

E-Print Network [OSTI]

of delivered power and energy capacities. Hydraulic storage or compressed air energy storage (CAES) can be used-turbine to displace a virtual liquid piston for air compression (Figure 1). A dynamic model of the storage system. It is based upon air compression storage using a hydraulic drive, which allows relatively high conversion

Paris-Sud XI, Université de

414

K.K. Gan IPRD06 1 Bandwidths of Micro Twisted-Pair Cables  

E-Print Network [OSTI]

A or more What is rise/fall time after irradiation? What is optical power after irradiation? What currentK.K. Gan IPRD06 1 Bandwidths of Micro Twisted-Pair Cables and Fusion Spliced SIMM-GRIN Fibers Introduction Bandwidth of micro twisted-pair cables Bandwidth of fusion spliced SIMM-GRIN fibers Radiation

Gan, K. K.

415

Optimisation de pilotage d'installation rsidentielle de chauffage par micro-cognration  

E-Print Network [OSTI]

and Power (mCHP), Energy management, Optimization. 1. INTRODUCTION La production locale d'électricité chez tarifaires dans le temps pour optimiser sa production et sa consommation propres. 2. MICRO-COGENERATION POUROptimisation de pilotage d'installation résidentielle de chauffage par micro- cogénération

Paris-Sud XI, Université de

416

Company Name: Allegro MicroSystems, Inc. Web Site: www.allegromicro.com  

E-Print Network [OSTI]

Company Name: Allegro MicroSystems, Inc. Web Site: www.allegromicro.com Industry: Semiconductor Brief Company Overview: Allegro MicroSystems, Inc. is a leader in developing, manufacturing and marketing high- performance power and Hall-effect sensor integrated circuits. Allegro's innovative solutions

New Hampshire, University of

417

Original Research Article Influence of anodic gas recirculation on solid oxide fuel cells in a micro  

E-Print Network [OSTI]

in a micro combined heat and power system Vincenzo Liso , Mads Pagh Nielsen, Søren Knudsen Kær Aalborg in previous analyses. Riensche et al. [2], conducted a system level analysis on a SOFC-based combined heat the purpose of conserving the de-mineralized and de-ionized water within the system [1]. Many studies on micro

Nielsen, Mads Pagh

418

Policy Issues for Retail Beamed Power Transmission  

E-Print Network [OSTI]

solar electric power using retail delivery of beamed power. Recent advances in power beaming have made to enable widespread adoption of this clean and sustainable contribution to meeting energy needs. It is seen to micro-renewable energy resource exploitation since wired power transmission is only cost effective over

419

La dynamique de communication entre Hydro-Qubec et les Innus dans le cadre du projet de la Romaine  

E-Print Network [OSTI]

La dynamique de communication entre Hydro-Québec et les Innus dans le cadre du projet de la Romaine Fortin, 2014 #12;#12;iii Résumé Le mémoire porte sur la dynamique de communication entre Hydro-Québec et, composées dInnus et de représentants dHydro-Québec, et dont le rôle est de gérer les fonds. De plus, le

420

Understanding and Improving Household Energy Consumption and Carbon Emissions Policies - A System Dynamics Approach  

E-Print Network [OSTI]

? scale?. This covers any energy generation that is decentralized. Micro-generation technologies may take the form of solar photovoltaic (PV), micro-wind turbines, micro-hydro or even micro-combined heat and power (CHP). Micro-generation provides energy...

Oladokun, M.; Motawa, I.; Banfill, P.

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Micro-fluidic interconnect  

DOE Patents [OSTI]

An apparatus for simultaneously aligning and interconnecting microfluidic ports is presented. Such interconnections are required to utilize microfluidic devices fabricated in Micro-Electromechanical-Systems (MEMS) technologies, that have multiple fluidic access ports (e.g. 100 micron diameter) within a small footprint, (e.g. 3 mm.times.6 mm). Fanout of the small ports of a microfluidic device to a larger diameter (e.g. 500 microns) facilitates packaging and interconnection of the microfluidic device to printed wiring boards, electronics packages, fluidic manifolds etc.

Okandan, Murat (Albuquerque, NM); Galambos, Paul C. (Albuquerque, NM); Benavides, Gilbert L. (Los Ranchos, NM); Hetherington, Dale L. (Albuquerque, NM)

2006-02-28T23:59:59.000Z

422

Electrochemical micro sensor  

DOE Patents [OSTI]

A micro-amperometric electrochemical sensor for detecting the presence of a pre-determined species in a fluid material is disclosed. The sensor includes a smooth substrate having a thin coating of solid electrolytic material deposited thereon. The working and counter electrodes are deposited on the surface of the solid electrolytic material and adhere thereto. Electrical leads connect the working and counter electrodes to a potential source and an apparatus for measuring the change in an electrical signal caused by the electrochemical oxidation or reduction of the species. Alternatively, the sensor may be fabricated in a sandwich structure and also may be cylindrical, spherical or other shapes.

Setter, Joseph R. (Naperville, IL); Maclay, G. Jordan (Maywood, IL)

1989-09-12T23:59:59.000Z

423

Microsoft PowerPoint - NERC Reliability Standards and Mandatory Compliance Presentation to Hydro-Power Conference - June 2007.p  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping Richland OperationsU.S. CommercialInMicrobial

424

Micro rotary machine and methods for using same  

DOE Patents [OSTI]

A micro rotary machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft comprises a horizontal shaft and is operable to be rotated by the micro actuator. A micro tool is coupled to the micro shaft and is operable to perform work in response to motion of the micro shaft.

Stalford, Harold L. (Norman, OK)

2012-04-17T23:59:59.000Z

425

Enhanced Performance of Micro-Electro-Mechanical-Systems (MEMS) Microbial  

E-Print Network [OSTI]

Electrospun Microfibrous Anode and Optimizing Operation A. Fraiwan1 , S. Sundermier1 , D. Han2 , A. J. Steckl2 decreasing current generation. They achieved a high power density micro-sized MFC by optimizing the anode as a potential source for renewable energy production. A MFC can transform the chemical energy of bio- degradable

Steckl, Andrew J.

426

LASER TRANSFERRED HYDROUS RUTHENIUM OXIDE ELECTRODES FOR MICRO-ULTRACAPACITORS  

E-Print Network [OSTI]

products and telecommunication devices to electric/hybrid vehicles and stand-by power systems is also critical for the operation of autonomous microelectronic systems such as microsensors. These requirements are unable to be met by the current generation of microbatteries or micro-fuel cells alone (4, 5

Arnold, Craig B.

427

Micro -Thermonuclear AB-Reactors for Aerospace  

E-Print Network [OSTI]

The author offers several innovations that he first suggested publicly early in 1983 for the AB multi-reflex engine, space propulsion, getting energy from plasma, etc. (see: A. Bolonkin, Non-Rocket Space Launch and Flight, Elsevier, London, 2006, Chapters 12, 3A). It is the micro-thermonuclear AB-Reactors. That is new micro-thermonuclear reactor with very small fuel pellet that uses plasma confinement generated by multi-reflection of laser beam or its own magnetic field. The Lawson criterion increases by hundreds of times. The author also suggests a new method of heating the power-making fuel pellet by outer electric current as well as new direct method of transformation of ion kinetic energy into harvestable electricity. These offered innovations dramatically decrease the size, weight and cost of thermonuclear reactor, installation, propulsion system and electric generator. Non-industrial countries can produce these researches and constructions. Currently, the author is researching the efficiency of these innovations for two types of the micro-thermonuclear reactors: multi-reflection reactor (ICF) and self-magnetic reactor (MCF).

Alexander Bolonkin

2007-01-08T23:59:59.000Z

428

Modeling, design and analysis of micro-scale Rankine-based systems  

E-Print Network [OSTI]

This thesis presents the modeling and design of two major types of micro Rankine-cycle-based machines: a single-Rankine-based power system and a waste-heat-driven cooler. As part of the Massachusetts Institute of Technology ...

Cui, Ling, 1978-

2004-01-01T23:59:59.000Z

429

Energie-und Leistungsbilanzierung im MICRO GRID eines industriellen Produktionsstandortes mit  

E-Print Network [OSTI]

an das lokale MICRO GRID angeschlossenen elektrischen Energiespeicher und eine ,,POWER TO GAS" -Anlage ermöglichen. Aufgabe: Um einen effizienten Einsatz des BHKW's, des Speichers und der POWER TO GAS ­ Einheit zu Konzeptes zum wirtschaftlich effizienten Einsatz des BHKW's, des Speichers und der POWER TO GAS ­ Einheit 6

Paderborn, Universität

430

Durham University, School of Engineering, Low Voltage Micro-generation Laboratory  

E-Print Network [OSTI]

. The system can control the micro- source and ESU inverter interfaces in order to regulate active power flow for organisations looking to carry out the following types of work: · Testing new designs of low voltage power. Reactive power flow into and out of the energy storage system may also be controlled, Figure 4. Finally

Wirosoetisno, Djoko

431

Advanced Micro Turbine System (AMTS) -C200 Micro Turbine -Ultra-Low Emissions Micro Turbine  

SciTech Connect (OSTI)

In September 2000 Capstone Turbine Corporation commenced work on a US Department of Energy contract to develop and improve advanced microturbines for power generation with high electrical efficiency and reduced pollutants. The Advanced MicroTurbine System (AMTS) program focused on: (1) The development and implementation of technology for a 200 kWe scale high efficiency microturbine system (2) The development and implementation of a 65 kWe microturbine which meets California Air Resources Board (CARB) emissions standards effective in 2007. Both of these objectives were achieved in the course of the AMTS program. At its conclusion prototype C200 Microturbines had been designed, assembled and successfully completed field demonstration. C65 Microturbines operating on natural, digester and landfill gas were also developed and successfully tested to demonstrate compliance with CARB 2007 Fossil Fuel Emissions Standards for NOx, CO and VOC emissions. The C65 Microturbine subsequently received approval from CARB under Executive Order DG-018 and was approved for sale in California. The United Technologies Research Center worked in parallel to successfully execute a RD&D program to demonstrate the viability of a low emissions AMS which integrated a high-performing microturbine with Organic Rankine Cycle systems. These results are documented in AMS Final Report DOE/CH/11060-1 dated March 26, 2007.

Capstone Turbine Corporation

2007-12-31T23:59:59.000Z

432

EA-281-A Manitoba Hydro | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle1 Closing American Electric Power80A Rainy

433

EA-281-B Manitoba Hydro | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle1 Closing American Electric Power80A Rainy-B

434

Ris Energy Report 5 Hydro, ocean and geothermal 4 This chapter gives an overview of the development of  

E-Print Network [OSTI]

in 2003. [1] OECD, 47% Latin America, 20% China, 11% Former USSR, 9% Other Asia, 7% Africa, 3% Non of the development of other renewable energy technologies such as hydro, ocean and geothermal. These technologies

435

High density, optically corrected, micro-channel cooled, v-groove monolithic laser diode array  

DOE Patents [OSTI]

An optically corrected, micro-channel cooled, high density laser diode array achieves stacking pitches to 33 bars/cm by mounting laser diodes into V-shaped grooves. This design will deliver>4kW/cm2 of directional pulsed laser power. This optically corrected, micro-channel cooled, high density laser is usable in all solid state laser systems which require efficient, directional, narrow bandwidth, high optical power density pump sources.

Freitas, Barry L. (Livermore, CA)

1998-01-01T23:59:59.000Z

436

Spectral Modeling of SNe Ia Near Maximum Light: Probing the Characteristics of Hydro Models  

E-Print Network [OSTI]

We have performed detailed NLTE spectral synthesis modeling of 2 types of 1-D hydro models: the very highly parameterized deflagration model W7, and two delayed detonation models. We find that overall both models do about equally well at fitting well observed SNe Ia near to maximum light. However, the Si II 6150 feature of W7 is systematically too fast, whereas for the delayed detonation models it is also somewhat too fast, but significantly better than that of W7. We find that a parameterized mixed model does the best job of reproducing the Si II 6150 line near maximum light and we study the differences in the models that lead to better fits to normal SNe Ia. We discuss what is required of a hydro model to fit the spectra of observed SNe Ia near maximum light.

E. Baron; S. Bongard; David Branch; Peter H. Hauschildt

2006-03-03T23:59:59.000Z

437

Journal of Power Sources xxx (2005) xxxxxx POWER (power optimization for wireless energy requirements): A  

E-Print Network [OSTI]

, and lifetime in selection of appropriate battery electro- chemistries and configurations (i.e. parallel, series several power ranges (micro-, milli- and Watt); or (3) a power system designed to be housed within-charge of the batteries). Future work will be focused on continuously improving our present tool. © 2005 Elsevier B.V. All

Sastry, Ann Marie

2005-01-01T23:59:59.000Z

438

Advances in constitutive modelling of jointed rock hydro mechanical interactions at laboratory scale  

E-Print Network [OSTI]

) INPL-LAEGO-ENSMN, Parc de Saurupt, Ecole des mines, 54000 Nancy, France) (2) INERIS, Parc de Saurupt. The hydro mechanical modelling performed using 3DEC code can be improved from the previous analysis through débit hydraulique dans la fracture. La modélisation hydromécanique réalisée à l'aide du code 3DEC peut

Paris-Sud XI, Université de

439

Buda-Lund hydro model and the elliptic flow at RHIC  

E-Print Network [OSTI]

The ellipsoidally symmetric Buda-Lund hydrodynamic model describes naturally the transverse momentum and the pseudorapidity dependence of the elliptic flow in Au+Au collisions at $\\sqrt{s_{NN}} = 130$ and 200 GeV. The result confirms the indication of quark deconfinement in Au+Au collisions at RHIC, obtained from Buda-Lund hydro model fits to combined spectra and HBT radii of BRAHMS, PHOBOS, PHENIX and STAR.

M. Csanad; T. Csorgo; B. Lorstad

2004-02-12T23:59:59.000Z

440

Quantifying Barotrauma Risk to Juvenile Fish during Hydro-turbine Passage  

SciTech Connect (OSTI)

We introduce a method for hydro turbine biological performance assessment (BioPA) to bridge the gap between field and laboratory studies on fish injury and turbine engineering design. Using this method, a suite of biological performance indicators is computed based on simulated data from a computational fluid dynamics (CFD) model of a proposed hydro turbine design. Each performance indicator is a measure of the probability of exposure to a certain dose of an injury mechanism. If the relationship between the dose of an injury mechanism (stressor) and frequency of injury (dose-response) is known from laboratory or field studies, the likelihood of fish injury for a turbine design can be computed from the performance indicator. By comparing the values of the indicators from various turbine designs, engineers and biologists can identify the more-promising designs and operating conditions to minimize hydraulic conditions hazardous to passing fish. In this paper, the BioPA method is applied to estimate barotrauma induced mortal injury rates for Chinook salmon exposed to rapid pressure changes in Kaplan-type hydro turbines. Following the description of the general method, application of the BioPA to estimate the probability of mortal injury from exposure to rapid decompression is illustrated using a Kaplan hydro turbine at the John Day Dam on the Columbia River in the Pacific Northwest region of the USA. The estimated rates of mortal injury increased from 0.3% to 1.7% as discharge through the turbine increased from 334 to 564 m3/s for fish assumed to be acclimated to a depth of 5 m. The majority of pressure nadirs occurred immediately below the runner blades, with the lowest values in the gap at the blade tips and just below the leading edge of the blades. Such information can help engineers focus on problem areas when designing new turbine runners to be more fish-friendly than existing units.

Richmond, Marshall C.; Serkowski, John A.; Ebner, Laurie L.; Sick, Mirjam; Brown, Richard S.; Carlson, Thomas J.

2014-03-15T23:59:59.000Z

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

HydroChina ZhongNan Engineering Corp | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpen EnergyBoard"Starting a new pageHuadeHydroChina

442

Boundary Conditions of the Hydro-Cascade Model and Relativistic Kinetic Equations for Finite Domains  

E-Print Network [OSTI]

A detailed analysis of the coupled relativistic kinetic equations for two domains separated by a hypersurface having both space- and time-like parts is presented. Integrating the derived set of transport equations, we obtain the correct system of the hydro+cascade equations to model the relativistic nuclear collision process. Remarkably, the conservation laws on the boundary between domains conserve separately both the incoming and outgoing components of energy, momentum and baryonic charge. Thus, the relativistic kinetic theory generates twice the number of conservation laws compared to traditional hydrodynamics. Our analysis shows that these boundary conditions between domains, the three flux discontinuity, can be satisfied only by a special superposition of two cut-off distribution functions for the ``out'' domain. All these results are applied to the case of the phase transition between quark gluon plasma and hadronic matter. The possible consequences for an improved hydro+cascade description of the relativistic nuclear collisions are discussed. The unique properties of the three flux discontinuity and their effect on the space-time evolution of the transverse expansion are also analyzed. The possible modifications of both transversal radii from pion correlations generated by a correct hydro+cascade approach are discussed.

K. A. Bugaev

2004-01-29T23:59:59.000Z

443

Automated micro-tracking planar solar concentrators  

E-Print Network [OSTI]

tracking mechanics. Solar trackers rotate the solar panel orwith traditional solar trackers but its unique geometrysolar intensity depends on the role the micro micro-tracker

Hallas, Justin Matthew

2011-01-01T23:59:59.000Z

444

EIS-0005: Bonneville Power Administration FY 1979 Program  

Broader source: Energy.gov [DOE]

This final statement is one of a series prepared annually by BPA on each fiscal year's proposed construction and maintenance program. This statement covers the potential impact of the major new facilities and maintenance programs proposed for fiscal year 1979. It must be reviewed and used in conjunction with the overall programmatic environmental statement entitled ""The Role of the Bonneville Power Administration in the Pacific Northwest Power Supply System, Including Its Participation in the Hydro-Thermal Power Program: A Program Environmental Statement and Planning Report"" (The ""Role EIS""), particularly Appendix B - BFA Power Transmission.

445

POWER, THERMAL, AND RELIABILITY MODELING IN NANOMETER-SCALE  

E-Print Network [OSTI]

LEAKAGE POWER. THE WAGES OF POWER ARE BULKY, SHORT-LIVED BATTERIES, HUGE HEAT SINKS, LARGE ON the power consumptions and power densities of high-performance micro- processors; some now consume 100 watts. High power consumption introduces chal- lenges to various aspects of microprocessor and computer system

Dick, Robert

446

Latching micro optical switch  

DOE Patents [OSTI]

An optical switch reliably maintains its on or off state even when subjected to environments where the switch is bumped or otherwise moved. In addition, the optical switch maintains its on or off state indefinitely without requiring external power. External power is used only to transition the switch from one state to the other. The optical switch is configured with a fixed optical fiber and a movable optical fiber. The movable optical fiber is guided by various actuators in conjunction with a latching mechanism that configure the switch in one position that corresponds to the on state and in another position that corresponds to the off state.

Garcia, Ernest J; Polosky, Marc A

2013-05-21T23:59:59.000Z

447

Towards and industrial ecosystem for power MEMS  

E-Print Network [OSTI]

This thesis is concerned with the commercial applications of MEMS (Micro-Electro-Mechanical Systems) manufacturing processes to advanced energy technologies. This field of engineering has come to be known as Power MEMS. ...

Havel, Timothy Franklin

2007-01-01T23:59:59.000Z

448

Development of Electrochemical Micro Machining  

E-Print Network [OSTI]

. Micro electrochemical machining (µECM) removes material while holding micron tolerances and µECM can machine hard metals and alloys. This study aims at developing a novel µECM utilizing high frequency voltage pulses and closed loop control... DEVELOPMENT OF ELECTROCHEMICAL MICRO MACHINING A Thesis by SRIHARSHA SRINIVAS SUNDARRAM Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER...

Srinivas Sundarram, Sriharsha

2008-10-10T23:59:59.000Z

449

A Micro-Thermodynamic Formalism  

E-Print Network [OSTI]

We consider the micro-canonical ensemble of a classical Hamiltonian dynamical system, the Hamiltonian being parameter dependent and in the possible presence of other first integrals. We describe a thermodynamic formalism in which a 1st law of thermodynamics, or fundamental relation, is based upon the bulk-entropy, S. Under an ergodic hypothesis, S is shown to be an adiabatic invariant. Expressions for derivatives and thermodynamic relations are derived within the micro-canonical ensemble itself.

Hans Henrik Rugh

2002-01-30T23:59:59.000Z

450

A Micro-Grid Simulator Tool (SGridSim) using Effective Node-to-Node Complex Impedance (EN2NCI) Models  

SciTech Connect (OSTI)

This paper presents a micro-grid simulator tool useful for implementing and testing multi-agent controllers (SGridSim). As a common engineering practice it is important to have a tool that simplifies the modeling of the salient features of a desired system. In electric micro-grids, these salient features are the voltage and power distributions within the micro-grid. Current simplified electric power grid simulator tools such as PowerWorld, PowerSim, Gridlab, etc, model only the power distribution features of a desired micro-grid. Other power grid simulators such as Simulink, Modelica, etc, use detailed modeling to accommodate the voltage distribution features. This paper presents a SGridSim micro-grid simulator tool that simplifies the modeling of both the voltage and power distribution features in a desired micro-grid. The SGridSim tool accomplishes this simplified modeling by using Effective Node-to-Node Complex Impedance (EN2NCI) models of components that typically make-up a micro-grid. The term EN2NCI models means that the impedance based components of a micro-grid are modeled as single impedances tied between their respective voltage nodes on the micro-grid. Hence the benefit of the presented SGridSim tool are 1) simulation of a micro-grid is performed strictly in the complex-domain; 2) faster simulation of a micro-grid by avoiding the simulation of detailed transients. An example micro-grid model was built using the SGridSim tool and tested to simulate both the voltage and power distribution features with a total absolute relative error of less than 6%.

Udhay Ravishankar; Milos manic

2013-08-01T23:59:59.000Z

451

2007 Wholesale Power Rate Case Initial Proposal : Revenue Requirement Study.  

SciTech Connect (OSTI)

The purpose of this Study is to establish the level of revenues from wholesale power rates necessary to recover, in accordance with sound business principles, the Federal Columbia River Power System (FCRPS) costs associated with the production, acquisition, marketing, and conservation of electric power. The generation revenue requirement includes: recovery of the Federal investment in hydro generation, fish and wildlife and conservation costs; Federal agencies' operations and maintenance (O&M) expenses allocated to power; capitalized contract expenses associated with non-Federal power suppliers such as Energy Northwest (EN); other power purchase expenses, such as short-term power purchases; power marketing expenses; cost of transmission services necessary for the sale and delivery of FCRPS power; and all other generation-related costs incurred by the Administrator pursuant to law.

United States. Bonneville Power Administration.

2005-11-01T23:59:59.000Z

452

Electric Power Interruption Cost Estimates for Individual Industries, Sectors, and the U.S. Economy  

E-Print Network [OSTI]

(Lehtonen et at. 1995) Finland 1992 1993 Industrial- US$15.79/kW - I-Hour Interruption Commercial - US$17.86/kW - I-Hour Interruption Residential- US$3.16/kW - I-Hour Interruption Lehtonen and Lemstroem (Lehtonen et al. 1995) Iceland 1992 1993.... VTT Energy. Jyvaskyla, Finland. (1995). 9. New York City Office of Economic Development. Statistical Profile of Emergency Aid Corrunission Applications. New York, New York. (1977). 10. Ontario Hydro. Ontario Hydro Survey on Power System...

Balducci, P. J.; Roop, J. M.; Schienbein, L. A.; DeSteese, J. G.; Weimar, M. R.

453

Power system applications engineering intern experience at TRW Controls: an internship report  

E-Print Network [OSTI]

nifica nt project involved generator dynamics mode ll in g for Hydro and BWR Nuc lear g ener at or s in a Dis pa tcher Tr ai ning S im ul ator and the other was the ge neratio n of software mo dules to validate data cards for a Hydro Electric... for the degree of DOCTOR OF ENG INEERING August 1984 Major Subject: Electrical Engineering POWER SYSTEM APPLICATIONS ENGINEERING INTERN EXPERIENCE AT TRW CONTROLS An Internship Report by CHANDRAKU MA R JOHN BALACHANDRA Approved as to style and content by...

Balachandra, Chandrakumar John

2013-03-13T23:59:59.000Z

454

The Micro Craft iSTAR Micro Air Vehicle: Control System Design and Testing  

E-Print Network [OSTI]

-rotating propellers) benefits both reliability and cost. Figure 1: iSTAR Micro Air Vehicle The Micro Craft iSTAR VTOLThe Micro Craft iSTAR Micro Air Vehicle: Control System Design and Testing Larry Lipera i Abstract The iSTAR Micro Air Vehicle (MAV) is a unique 9-inch diameter ducted air vehicle weighing

Rotkowitz, Michael C.

455

Micro-layered-photolithography for Micro-Fabrication and Micro-Molding  

E-Print Network [OSTI]

A novel process based on the principle of layered photolithography has been proposed and tested for making real three-dimensional micro-structures. An experimental setup was designed and built for doing experiments on this ...

Tang, Y.

456

inverter. He is the author or co-author of more than 300 publica-tions in his research fields including the book `Control in Power  

E-Print Network [OSTI]

W, the induction generator is favored for small hydro and wind power plants. More recently, with the widespread use Power Electronics Society NEWSLETTER 19 Induction Generators for Small Wind Energy Systems M. Godoy solution for such applications [1]. For its simplicity, robustness, and small size per generated k

Simões, Marcelo Godoy

457

The centrality dependence of v2/epsilon: the ideal hydro limit and eta/s  

E-Print Network [OSTI]

The large elliptic flow observed at RHIC is considered to be evidence for almost perfect liquid behavior of the strongly coupled quark-gluon plasma produced in the collisions. In these proceedings we present a two parameter fit for the centrality dependence of the elliptic flow scaled by the spatial eccentricity. We show by comparing to viscous hydrodynamical calculations that these two parameters are in good approximation proportional to the shear viscosity over entropy ratio and the ideal hydro limit of the ratio v2/epsilon.

H. Masui; J-Y. Ollitrault; R. Snellings; A. Tang

2009-09-25T23:59:59.000Z

458

Analysis of closed-pool boilup using the TRANSIT-HYDRO code. [LMFBR  

SciTech Connect (OSTI)

The benign termination of the transition phase of a hypothetical LMFBR accident rests on the avoidance of highly energetic recriticalities prior to escape of bottled molten core materials from the active core region. In scenarios where molten fuel is trapped due to axial blockages, the maintenance of subcritical configurations until radial flow paths develop requires stable boil-up of the molten fuel/steel mixture. This paper describes the analysis of an experiment investigating the behavior of closed boiling pools using the two-fluid hydrodynamics module of TRANSIT-HYDRO, a deterministic transition-phase analysis code.

Graff, D.L.

1983-01-04T23:59:59.000Z

459

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network [OSTI]

wind turbines, and micro- hydro, PV dominates building-sitedgrid-integrated), 3% micro-hydro, and 2% micro-wind. Grid-

Garbesi, Karina

2012-01-01T23:59:59.000Z

460

Recent Developments in Mems-Based Micro Fuel Cells  

E-Print Network [OSTI]

Micro fuel cells ($\\mu$-FC) represent promising power sources for portable applications. Today, one of the technological ways to make $\\mu$-FC is to have recourse to standard microfabrication techniques used in the fabrication of micro electromechanical systems (MEMS). This paper shows an overview on the applications of MEMS techniques on miniature FC by presenting several solutions developed throughout the world. It also describes the latest developments of a new porous silicon-based miniature fuel cell. Using a silane grafted on an inorganic porous media as the proton-exchange membrane instead of a common ionomer such as Nafion, the fuel cell achieved a maximum power density of 58 mW cm-2 at room temperature with hydrogen as fuel.

Pichonat, T

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

TidGen Power System Commercialization Project  

SciTech Connect (OSTI)

ORPC Maine, LLC, a wholly-owned subsidiary of Ocean Renewable Power Company, LLC (collectively ORPC), submits this Final Technical Report for the TidGen® Power System Commercialization Project (Project), partially funded by the U.S. Department of Energy (DE-EE0003647). The Project was built and operated in compliance with the Federal Energy Regulatory Commission (FERC) pilot project license (P-12711) and other permits and approvals needed for the Project. This report documents the methodologies, activities and results of the various phases of the Project, including design, engineering, procurement, assembly, installation, operation, licensing, environmental monitoring, retrieval, maintenance and repair. The Project represents a significant achievement for the renewable energy portfolio of the U.S. in general, and for the U.S. marine hydrokinetic (MHK) industry in particular. The stated Project goal was to advance, demonstrate and accelerate deployment and commercialization of ORPC’s tidal-current based hydrokinetic power generation system, including the energy extraction and conversion technology, associated power electronics, and interconnection equipment capable of reliably delivering electricity to the domestic power grid. ORPC achieved this goal by designing, building and operating the TidGen® Power System in 2012 and becoming the first federally licensed hydrokinetic tidal energy project to deliver electricity to a power grid under a power purchase agreement in North America. Located in Cobscook Bay between Eastport and Lubec, Maine, the TidGen® Power System was connected to the Bangor Hydro Electric utility grid at an on-shore station in North Lubec on September 13, 2012. ORPC obtained a FERC pilot project license for the Project on February 12, 2012 and the first Maine Department of Environmental Protection General Permit issued for a tidal energy project on January 31, 2012. In addition, ORPC entered into a 20-year agreement with Bangor Hydro Electric Company on January 1, 2013 for up to 5 megawatts at a price of $215/MWh, escalating at 2.0% per year.

Sauer, Christopher R. [President & CEO] [President & CEO; McEntee, Jarlath [VP Engineering & CTO] [VP Engineering & CTO

2013-12-30T23:59:59.000Z

462

E-Print Network 3.0 - aged thermal power Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technologies and Information Sciences ; Engineering 54 Dynamic modelling for thermal micro-actuators using thermal networks Summary: , but sufficiently accurate and powerful...

463

E-Print Network 3.0 - activitieselectric power transmission Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Computer Technologies and Information Sciences 40 MBMS Power Planning in Macro and Micro Cell Environments Antonios Alexiou, Christos Bouras, Vasileios Kokkinos, Evangelos...

464

A Conceptual Approach to Two-Scale Constitutive Modelling For Hydro-Mechanical Coupling  

E-Print Network [OSTI]

Large scale modelling of fluid flow coupled with solid failure in geothermal reservoirs or hydrocarbon extraction from reservoir rocks usually involves behaviours at two scales: lower scale of the inelastic localization zone, and larger scale of the bulk continuum where elastic behaviour can be reasonably assumed. The hydraulic conductivities corresponding to the mechanical properties at these two scales are different. In the bulk elastic host rock, the hydraulic conductivity does not vary much with the deformation, while it significantly changes in the lower scale of the localization zone due to inelastic deformation. Increase of permeability due to fracture and/or dilation, or reduction of permeability due to material compaction can take place inside this zone. The challenge is to predict the evolution of hydraulic conductivities coupled with the mechanical behaviour of the material in all stages of the deformation process. In the early stage of diffuse deformation, the permeability of the material can be reasonably assumed to be homogenous over the whole Representative Volume Element (RVE) However, localized failure results in distinctly different conductivities in different parts of the RVE. This paper establishes a general framework and corresponding field equations to describe the hydro-mechanical coupling in both diffuse and localized stages of deformation in rocks. In particular, embedding the lower scale hydro-mechanical behaviour of the localization zone inside an elastic bulk, together with their corresponding effective sizes, helps effectively deal with scaling issues in large-scale modelling. Preliminary results are presented which demonstrate the promising features of this new approach.

Giang D. Nguyen; Abbas El-Zein; Terry Bennett

2014-06-05T23:59:59.000Z

465

BETHE-Hydro: An Arbitrary Lagrangian-Eulerian Multi-dimensional Hydrodynamics Code for Astrophysical Simulations  

E-Print Network [OSTI]

In this paper, we describe a new hydrodynamics code for 1D and 2D astrophysical simulations, BETHE-hydro, that uses time-dependent, arbitrary, unstructured grids. The core of the hydrodynamics algorithm is an arbitrary Lagrangian-Eulerian (ALE) approach, in which the gradient and divergence operators are made compatible using the support-operator method. We present 1D and 2D gravity solvers that are finite differenced using the support-operator technique, and the resulting system of linear equations are solved using the tridiagonal method for 1D simulations and an iterative multigrid-preconditioned conjugate-gradient method for 2D simulations. Rotational terms are included for 2D calculations using cylindrical coordinates. We document an incompatibility between a subcell pressure algorithm to suppress hourglass motions and the subcell remapping algorithm and present a modified subcell pressure scheme that avoids this problem. Strengths of this code include a straightforward structure, enabling simple inclusion of additional physics packages, the ability to use a general equation of state, and most importantly, the ability to solve self-gravitating hydrodynamic flows on time-dependent, arbitrary grids. In what follows, we describe in detail the numerical techniques employed and, with a large suite of tests, demonstrate that BETHE-hydro finds accurate solutions with 2$^{nd}$-order convergence.

Jeremiah W. Murphy; Adam Burrows

2008-07-09T23:59:59.000Z

466

Power Plant Power Plant  

E-Print Network [OSTI]

Basin Center for Geothermal Energy at University of Nevada, Reno (UNR) 2 Nevada Geodetic LaboratoryStillwater Power Plant Wabuska Power Plant Casa Diablo Power Plant Glass Mountain Geothermal Area Lassen Geothermal Area Coso Hot Springs Power Plants Lake City Geothermal Area Thermo Geothermal Area

Tingley, Joseph V.

467

K.K. Gan IWORID-8 1 Bandwidths of Micro Twisted-Pair Cables  

E-Print Network [OSTI]

-V Characteristics very good optical power candidate for irradiation study Optowell TP85-LCP0N 0.0 0.5 1.0 1.5 2K.K. Gan IWORID-8 1 Bandwidths of Micro Twisted-Pair Cables and Fusion Spliced SIMM-GRIN Fibers Bandwidth of micro twisted-pair cables Bandwidth of fusion spliced SIMM-GRIN fibers Measurement of VCSEL

Gan, K. K.

468

Hydro overview  

E-Print Network [OSTI]

We review recent progress in applying relativistic hydrodynamics to the modeling of heavy-ion collisions at RHIC and LHC, with emphasis on anisotropic flow and flow fluctuations.

Jean-Yves Ollitrault; Fernando G. Gardim

2012-10-31T23:59:59.000Z

469

Power Factor Reactive Power  

E-Print Network [OSTI]

power: 130 watts Induction motor PSERC Incandescent lights 0 0.002 0.004 0.006 0.008 0.01 0.012 0.014 0 power: 150 watts #12;Page 4 PSERC Incandescent Lights PSERC Induction motor with no load #12;Page 5 Incandescent Lights #12;Page 7 PSERC Incandescent lights power: Power = 118 V x 1.3 A = 153 W = 0.15 kW = power

470

Numerical simulation of electrokinetically driven micro flows  

E-Print Network [OSTI]

Spectral element based numerical solvers are developed to simulate electrokinetically driven flows for micro-fluidic applications. Based on these numerical solvers, basic phenomena and devices for electrokinetic applications in micro and nano flows...

Hahm, Jungyoon

2005-11-01T23:59:59.000Z

471

EE 337 Engineering micro and nano-systems EE 337 Engineering micro and nano-systems  

E-Print Network [OSTI]

EE 337 Engineering micro and nano-systems EE 337 Engineering micro and nano-systems A.F.J. Levi as an introduction to micro and nano-technology, methods to control and exploit the new degrees of freedom delivered by nano-science, and the integration of micro and nano-technology into systems. It is a hands

Levi, Anthony F. J.

472

Micro-origin of Macro-strength: Friction  

E-Print Network [OSTI]

This paper presents an analytical study about the behavior of arbitrary shaped and sized non-cohesive two-dimensional granular materials. Several mechanical properties and relations are unraveled by connecting micro and macro scales in an explicit fashion that, at the same time, provides the basis of an analytical-theoretical framework for the development of new multi-scale techniques. Furthermore, the work herein presented is based on three main ideas that are developed and connected progressively; namely, the obtention of explicit expressions that enable us to relate micro-scale parameters, such as contact forces and fabric, to stress as a macro (continuum) physical property. Then, with these powerful tools, physical connections and relations between the mentioned micro-parameters and macro-constitutive parameters, in specific, Mohr-Coulomb's mobilized internal friction angle, are established. Finally, a non-linear optimization problem, which includes physical constraints at the contact point level, is proposed and solved in order to find the limit (maximum) internal friction angle in terms of the aforementioned micro-parameters. Thus, throughout this theoretical study, some important features about strength, anisotropy, contact buckling, and non-uniqueness of systems of contact forces are extracted, allowing us to have a deeper insight, as well as, a better understanding of the mechanical behavior of such complex-to-model materials.

Alex X. Jerves; José E. Andrade

2012-12-11T23:59:59.000Z

473

Theory of hydro-equivalent ignition for inertial fusion and its applications to OMEGA and the National Ignition Facility  

SciTech Connect (OSTI)

The theory of ignition for inertial confinement fusion capsules [R. Betti et al., Phys. Plasmas 17, 058102 (2010)] is used to assess the performance requirements for cryogenic implosion experiments on the Omega Laser Facility. The theory of hydrodynamic similarity is developed in both one and two dimensions and tested using multimode hydrodynamic simulations with the hydrocode DRACO [P. B. Radha et al., Phys. Plasmas 12, 032702 (2005)] of hydro-equivalent implosions (implosions with the same implosion velocity, adiabat, and laser intensity). The theory is used to scale the performance of direct-drive OMEGA implosions to the National Ignition Facility (NIF) energy scales and determine the requirements for demonstrating hydro-equivalent ignition on OMEGA. Hydro-equivalent ignition on OMEGA is represented by a cryogenic implosion that would scale to ignition on the NIF at 1.8?MJ of laser energy symmetrically illuminating the target. It is found that a reasonable combination of neutron yield and areal density for OMEGA hydro-equivalent ignition is 3 to 6?×?10{sup 13} and ?0.3?g/cm{sup 2}, respectively, depending on the level of laser imprinting. This performance has not yet been achieved on OMEGA.

Nora, R.; Betti, R.; Bose, A.; Woo, K. M.; Christopherson, A. R.; Meyerhofer, D. D. [Laboratory for Laser Energetics, University of Rochester, 250 East River Road, Rochester, New York 14623-1299 (United States); Fusion Science Center, University of Rochester, 250 East River Road, Rochester, New York 14623-1299 (United States); Department of Physics and/or Mechanical Engineering, University of Rochester, 250 East River Road, Rochester, New York 14623-1299 (United States); Anderson, K. S.; Shvydky, A.; Marozas, J. A.; Collins, T. J. B.; Radha, P. B.; Hu, S. X.; Epstein, R.; Marshall, F. J.; Sangster, T. C. [Laboratory for Laser Energetics, University of Rochester, 250 East River Road, Rochester, New York 14623-1299 (United States); McCrory, R. L. [Laboratory for Laser Energetics, University of Rochester, 250 East River Road, Rochester, New York 14623-1299 (United States); Department of Physics and/or Mechanical Engineering, University of Rochester, 250 East River Road, Rochester, New York 14623-1299 (United States)

2014-05-15T23:59:59.000Z

474

Lyman Alpha Flux Power Spectrum and Its Covariance  

E-Print Network [OSTI]

We analyze the flux power spectrum and its covariance using simulated Lyman alpha forests. We find that pseudo-hydro techniques are good approximations of hydrodynamical simulations at high redshift. However, the pseudo-hydro techniques fail at low redshift because they are insufficient for characterizing some components of the low-redshift intergalactic medium, notably the warm-hot intergalactic medium. Hence, to use the low-redshift Lyman alpha flux power spectrum to constrain cosmology, one would need realistic hydrodynamical simulations. By comparing one-dimensional mass statistics with flux statistics, we show that the nonlinear transform between density and flux quenches the fluctuations so that the flux power spectrum is much less sensitive to cosmological parameters than the one-dimensional mass power spectrum. The covariance of the flux power spectrum is nearly Gaussian. As such, the uncertainties of the underlying mass power spectrum could still be large, even though the flux power spectrum can be precisely determined from a small number of lines of sight.

Hu Zhan; Romeel Dave; Daniel Eisenstein; Neal Katz

2005-08-10T23:59:59.000Z

475

Using Hydro-Cutting to Aid in Remediation of a Firing Range Contaminated with Depleted Uranium  

SciTech Connect (OSTI)

This paper describes the challenges encountered in decommissioning a firing range that had been used to test fire depleted uranium rounds in the late 1950's and early 1960's. The paper details the operational challenges and innovative solutions involved in remediating and decommissioning a firing range bullet catcher once unexploded ordnance was discovered. It also discusses how the Army dealt with an intertwining web of regulatory and permit issues that arose in treating and disposing of multiple waste streams. The paper will show how the use of a Resource Conservation and Recovery Act (RCRA) Temporary Authorization allowed the Army to deal with the treatment of a variety of waste streams and how hydro-cutting process was used to demilitarize the potentially unexploded rounds.

Styvaert, Michael S.; Conley, Richard D.; Watters, David J.

2003-02-24T23:59:59.000Z

476

Buda-Lund hydro model for ellipsoidally symmetric fireballs and the elliptic flow at RHIC  

E-Print Network [OSTI]

The ellipsoidally symmetric extension of Buda-Lund hydrodynamic model is shown here to yield a natural description of the pseudorapidity dependence of the elliptic flow $v_2(\\eta)$, as determined recently by the PHOBOS experiment for Au+Au collisions at $\\sqrt{s_{NN}} = 130$ and 200 GeV. With the same set of parameters, the Buda-Lund model describes also the transverse momentum dependence of $v_2$ of identified particles at mid-rapidity. The results confirm the indication for quark deconfinement in Au+Au collisions at RHIC, obtained from a successful Buda-Lund hydro model fit to the single particle spectra and two-particle correlation data, as measured by the BRAHMS, PHOBOS, PHENIX and STAR collaborations.

M. Csanad; T. Csorgo; B. Lorstad

2004-03-22T23:59:59.000Z

477

Understanding barotrauma in fish passing hydro structures: a global strategy for sustainable development of water resources  

SciTech Connect (OSTI)

Freshwater fishes are one of the most imperiled groups of vertebrates and species declines have been linked to a number of anthropogenic influences. This is alarming as the diversity and stability of populations are at risk. In addition, freshwater fish serve as important protein sources, particularly in developing countries. One of the focal activities thought to influence freshwater fish population declines is water resource development, which is anticipated to increase over the next several decades. For fish encountering hydro structures, such as passing through hydroturbines, there may be a rapid decrease in pressure which can lead to injuries commonly referred to as barotraumas. The authors summarize the research to date that has examined the effects of rapid pressure changes on fish and outline the most important factors to consider (i.e., swim bladder morphology, depth of acclimation, migration pattern and life stage) when examining the susceptibility of barotraumas for fish of interest.

Brown, Richard S.; Colotelo, Alison HA; Pflugrath, Brett D.; Boys, Craig A.; Baumgartner, Lee J.; Deng, Zhiqun; Silva, Luiz G.; Brauner, Colin J.; Mallen-Cooper, Martin; Phonekhampeng, Oudom; Thorncraft, Garry; Singhanouvong, Douangkham

2014-03-24T23:59:59.000Z

478

A practical design for an integrated HVDC unit - connected hydro-electric generating station  

SciTech Connect (OSTI)

To date, several authors (see reference list) have proclaimed benefits which can be achieved by integrating HVDC converter stations directly with generating units. The cost of a significant amount of plant and facilities found in conventional schemes is thereby eliminated. So far as is known however, no detailed studies have been done to quantify these benefits. This paper outlines the results of a study made recently by the Manitoba HVDC Research Centre to determine the practicality of such a scheme. To give credence to the results an actual hydro station design was used incorporating a HVDC thyristor valve scheme in a hypothetical situation. Financial and other benefits were determined for this example together with conclusions and recommendations for future specific projects and further areas of study.

Ingram, L. (Manitoba HVDC Research Centre, Winnipeg (CA))

1988-10-01T23:59:59.000Z

479

Hydrogen is a clean fuel. When used in fuel cells, the only byproducts are water and heat.  

E-Print Network [OSTI]

can provide energy at all scales, ranging from micro power sources for small consumer devices to multi breakthroughs for hydro- gen and fuel cells to compete in the market. This report offers examples of real

480

A better steam engine: Designing a distributed concentrating  

E-Print Network [OSTI]

, h d thydrogen, etc. · Hydro · Wind · Solar - PV, Thermal ­ 5.4 GW of PV, 20 GW of solar thermal Fluid Isentropic Fluid Dry Fluid [14] Aoun, B., 2009, Micro combined heat and power operating

Kammen, Daniel M.

Note: This page contains sample records for the topic "micro hydro power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

China energy, environment, and climate study: Background issues paper  

E-Print Network [OSTI]

Power Generation Resource Small Hydro Criteria for Selectioncapacity in 2000 (mainly small hydro; excludes large hydro),Generation, MW Technology Small Hydro Wind Solar PV Solar

Sinton, Jonathan E.; Fridley, David G.; Logan, Jeffrey; Guo, Yuan; Wang, Bangcheng; Xu, Qing

2000-01-01T23:59:59.000Z

482

Optimization of efficiency and energy density of passive micro fuel cells and galvanic hydrogen generators  

E-Print Network [OSTI]

A PEM micro fuel cell system is described which is based on self-breathing PEM micro fuel cells in the power range between 1 mW and 1W. Hydrogen is supplied with on-demand hydrogen production with help of a galvanic cell, that produces hydrogen when Zn reacts with water. The system can be used as a battery replacement for low power applications and has the potential to improve the run time of autonomous systems. The efficiency has been investigated as function of fuel cell construction and tested for several load profiles.

Hahn, Robert; Krumbholz, Steffen; Reichl, Herbert

2008-01-01T23:59:59.000Z

483

ULTRA-THIN QUARTZ COMBUSTORS FOR TPV POWER GENERATION  

E-Print Network [OSTI]

ULTRA-THIN QUARTZ COMBUSTORS FOR TPV POWER GENERATION Yong Fan, Yuji Suzuki, and Nobuhide Kasagi in planar quartz combustors with channel height of 0.7/1.0/1.5 mm have been investigated for micro on the wall temperature. Keywords: Quenching distance, Micro combustor, Wall/flame temperature, PLIF 1

Kasagi, Nobuhide

484

L'hlium est donc beaucoup plus difficile liqufier que l'hydro-gne dont le point critique est d'environ -  

E-Print Network [OSTI]

372 L'hélium est donc beaucoup plus difficile à liquéfier que l'hydro- gène dont le point critique près. L'auteur en conclut que le thermomètre à hydro- gène peut servir à déterminer les basses résistance servent à la détermination des températures, est enfermé dans le réservoir du thermomètre à hydro

Boyer, Edmond

485

Microsoft PowerPoint - mcfarquhar_micro.ppt  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping RichlandScattering PropertiesTechnique forTwin Otterheating

486

Smart Energy Management and Control for Fuel Cell Based Micro-Grid Connected Neighborhoods  

SciTech Connect (OSTI)

Fuel cell power generation promises to be an efficient, pollution-free, reliable power source in both large scale and small scale, remote applications. DOE formed the Solid State Energy Conversion Alliance with the intention of breaking one of the last barriers remaining for cost effective fuel cell power generation. The Alliance’s goal is to produce a core solid-state fuel cell module at a cost of no more than $400 per kilowatt and ready for commercial application by 2010. With their inherently high, 60-70% conversion efficiencies, significantly reduced carbon dioxide emissions, and negligible emissions of other pollutants, fuel cells will be the obvious choice for a broad variety of commercial and residential applications when their cost effectiveness is improved. In a research program funded by the Department of Energy, the research team has been investigating smart fuel cell-operated residential micro-grid communities. This research has focused on using smart control systems in conjunction with fuel cell power plants, with the goal to reduce energy consumption, reduce demand peaks and still meet the energy requirements of any household in a micro-grid community environment. In Phases I and II, a SEMaC was developed and extended to a micro-grid community. In addition, an optimal configuration was determined for a single fuel cell power plant supplying power to a ten-home micro-grid community. In Phase III, the plan is to expand this work to fuel cell based micro-grid connected neighborhoods (mini-grid). The economic implications of hydrogen cogeneration will be investigated. These efforts are consistent with DOE’s mission to decentralize domestic electric power generation and to accelerate the onset of the hydrogen economy. A major challenge facing the routine implementation and use of a fuel cell based mini-grid is the varying electrical demand of the individual micro-grids, and, therefore, analyzing these issues is vital. Efforts are needed to determine the most appropriate means of implementing micro-grids and the costs and processes involved with their extended operation. With the development and availability of fuel cell based stand-alone power plants, an electrical mini-grid, encompassing several connected residential neighborhoods, has become a viable concept. A primary objective of this project is to define the parameters of an economically efficient fuel cell based mini-grid. Since pure hydrogen is not economically available in sufficient quantities at the present time, the use of reforming technology to produce and store excess hydrogen will also be investigated. From a broader perspective, the factors that bear upon the feasibility of fuel cell based micro-grid connected neighborhoods are similar to those pertaining to the electrification of a small town with a localized power generating station containing several conventional generating units. In the conventional case, the town or locality would also be connected to the larger grid system of the utility company. Therefore, in the case of the fuel cell based micro-grid connected neighborhoods, this option should also be available. The objectives of this research project are: To demonstrate that smart energy management of a fuel cell based micro-grid connected neighborhood can be efficient and cost-effective;To define the most economical micro-grid configuration; and, To determine how residential micro-grid connected fuel cell(s) can contribute to America's hydrogen energy future.

Dr. Mohammad S. Alam

2006-03-15T23:59:59.000Z

487

THE SYSTEM OF POWER SUPPLIES, CONTROL AND MODULATION OF ELECTRON GUN FOR FREE ELECTRON LASER  

E-Print Network [OSTI]

end components: GaN JFET transistors, 1GHz fiber optic link and RF micro strip transformers. The output of power inverter is connected to input coil of isolated power transformer (300kV). Timer Electric power for part 2 goes from power inverter through isolated power transformer (isolation voltage

Kozak, Victor R.

488

atomic power generation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

a squeezed atom laser is to use Queensland, University of 420 A Silicon-Based Micro Gas Turbine Engine for Power Generation CERN Preprints Summary: This paper reports on our...

489

advanced power generation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ATK Aerospace, ITT Exelis and the University of Texas 324 A Silicon-Based Micro Gas Turbine Engine for Power Generation CERN Preprints Summary: This paper reports on our...

490

Sustainable Development of Renewable Energy Mini-grids for Energy Access: A Framework for Policy Design  

E-Print Network [OSTI]

2011. Under REDP, 317 village micro-hydro installations withthe loans for village micro-hydro projects were administeredvillage electrification program, offers capital subsidies for solar PV, micro-hydro

Deshmukh, Ranjit

2014-01-01T23:59:59.000Z

491

Sustainable Development of Renewable Energy Mini-grids for Energy Access: A Framework for Policy Design  

E-Print Network [OSTI]

S. Ariyabandu, “ Up-scaling Micro Hydro: A Success Story,”the deployment of over 500 micro-hydro facilities to providegrants and financing for micro-hydro mini-grids and solar

Deshmukh, Ranjit

2014-01-01T23:59:59.000Z

492

12827Federal Register / Vol. 77, No. 42 / Friday, March 2, 2012 / Notices National Grid Transmission Services Corporation Bangor Hydro Electric Company .............................................. Docket No. EL1149000.  

E-Print Network [OSTI]

. Cooperating agencies: Federal, state, local, and tribal agencies with jurisdiction and/or special expertise12827Federal Register / Vol. 77, No. 42 / Friday, March 2, 2012 / Notices National Grid Transmission Services Corporation Bangor Hydro Electric Company

493

International Microwave Power Institute 127 ANALYSIS OF OPERATIONAL REGIMES  

E-Print Network [OSTI]

for microwave heating. KEY WORDS: Electric field, dissipated power, micro- wave power, model, permittivity heating systems oper ating at 915 MHz is a standard feature protecting the magnetron from reflections LOAD E. Eves and V. Yakovlev Reflections, electric field and dissipated power of a 915 MHz water load

Yakovlev, Vadim

494

Advanced PID type fuzzy logic power system stabilizer  

SciTech Connect (OSTI)

An advanced fuzzy logic control scheme has been proposed for a micro-computer based power system stabilizer to enhance the overall stability of power systems. The proposed control scheme utilizes the PID information of the generator speed. The input signal to the stabilizer is the real power output of a study unit. Simulations show the effectiveness of the advanced fuzzy logic control scheme.

Hiyama, Takashi; Kugimiya, Masahiko; Satoh, Hironori (Kumamoto Univ. (Japan). Dept. of Electrical Engineering and Computer Science)

1994-09-01T23:59:59.000Z

495

Power Electronics Technology October 2004 www.powerelectronics.com48 Power Converters for  

E-Print Network [OSTI]

Fuel Cells Consideration of power conversion requirements during fuel cell design enables optimization of the energy density, power, size and cost for the complete micro fuel cell system. By Jonathan Systems,Champaign,Ill. M icro fuel cells have made tremendous strides in the past few years. New ma

Kimball, Jonathan W.

496

Flame Dynamics and Structure Within Sub-Millimeter Combustors  

E-Print Network [OSTI]

provided by combusting hydro- carbon fuels has stimulated interest in recent years toward the development of micro-and mesoscale portable heat and power sources, and systems for a myriad of applications,1 of micro- and mesoscale heat sources through development of micro- combustors, engines, heaters

497

2/21/2014 Micro-windmills Power Portable Devices | Power content from Electronic Design http://electronicdesign.com/power/micro-windmills-power-portable-devices 1/4  

E-Print Network [OSTI]

so complex 3D movable mechanical structures can be self-assembled from 2D metal pieces utilizing Turbines Spinning Electronic Design Europe Store Subscribe A bout Us Contact Us RSS A dv ertising Technologies News Markets Learning Resources Community Companies Part Search Electronic Design REGISTER LOG

Chiao, Jung-Chih

498

A Review of Power Electronics Based Microgrids 181 JPE 12-1-23 http://dx.doi.org/10.6113/JPE.2012.12.1.181  

E-Print Network [OSTI]

. With the growing deployment of DER units, especially small-scale Combined Heat and Power (CHP) plants and Renewable Energy Sources (RES) based Distributed Generation (DG) units, distribution systems can no longer in US, Hydro-Quebec microgrid in Canada, NEDO microgrid in Japan, and EU Microgrid in Europe, have shown

Chen, Zhe

499

OPTIMIZATION AND DESIGN GUIDELINES FOR HIGH FLUX MICRO-CHANNEL HEAT SINKS FOR LIQUID AND GASEOUS SINGLE-PHASE FLOW  

E-Print Network [OSTI]

forced convection micro-channel heat sinks for minimum pump power at high heat fluxes. Results gained orders of magnitude, especially for high heat flux devices. Using water and air as coolants, designs for heat fluxes of >10 kW/cm2 and >100 W/cm2 respectively with pump/fan power expenses less than 1

Müller, Norbert

500

FUEL CELL/MICRO-TURBINE COMBINED CYCLE  

SciTech Connect (OSTI)

A wide variety of conceptual design studies have been conducted that describe ultra-high efficiency fossil power plant cycles. The most promising of these ultra-high efficiency cycles incorporate high temperature fuel cells with a gas turbine. Combining fuel cells with a gas turbine increases overall cycle efficiency while reducing per kilowatt emissions. This study has demonstrated that the unique approach taken to combining a fuel cell and gas turbine has both technical and economic merit. The approach used in this study eliminates most of the gas turbine integration problems associated with hybrid fuel cell turbine systems. By using a micro-turbine, and a non-pressurized fuel cell the total system size (kW) and complexity has been reduced substantially from those presented in other studies, while maintaining over 70% efficiency. The reduced system size can be particularly attractive in the deregulated electrical generation/distribution environment where the market may not demand multi-megawatt central stations systems. The small size also opens up the niche markets to this high efficiency, low emission electrical generation option.

Larry J. Chaney; Mike R. Tharp; Tom W. Wolf; Tim A. Fuller; Joe J. Hartvigson

1999-12-01T23:59:59.000Z