Powered by Deep Web Technologies
Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

How do I convert between short tons and metric tons? - FAQ - U ...  

U.S. Energy Information Administration (EIA)

Other FAQs about Conversion & Equivalents. How do I convert between short tons and metric tons? How do I compare heating fuels?

2

DOE to Remove 200 Metric Tons of Highly Enriched Uranium from U.S. Nuclear  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to Remove 200 Metric Tons of Highly Enriched Uranium from U.S. to Remove 200 Metric Tons of Highly Enriched Uranium from U.S. Nuclear Weapons Stockpile DOE to Remove 200 Metric Tons of Highly Enriched Uranium from U.S. Nuclear Weapons Stockpile November 7, 2005 - 12:38pm Addthis Will Be Redirected to Naval Reactors, Down-blended or Used for Space Programs WASHINGTON, DC - Secretary of Energy Samuel W. Bodman today announced that the Department of Energy's (DOE) National Nuclear Security Administration (NNSA) will remove up to 200 metric tons (MT) of Highly Enriched Uranium (HEU), in the coming decades, from further use as fissile material in U.S. nuclear weapons and prepare this material for other uses. Secretary Bodman made this announcement while addressing the 2005 Carnegie International Nonproliferation Conference in Washington, DC.

3

DOE to Remove 200 Metric Tons of Highly Enriched Uranium from...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Other Agencies You are here Home DOE to Remove 200 Metric Tons of Highly Enriched Uranium from U.S. Nuclear Weapons Stockpile DOE to Remove 200 Metric Tons of Highly...

4

DOE Will Dispose of 34 Metric Tons of Plutonium by Turning it...  

National Nuclear Security Administration (NNSA)

Metric Tons of Plutonium by Turning it into Fuel for Civilian Reactors January 23, 2002 Washington, DC DOE Will Dispose of 34 Metric Tons of Plutonium by Turning it into Fuel for...

5

U.S. Removes Nine Metric Tons of Plutonium From Nuclear Weapons Stockpile |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Removes Nine Metric Tons of Plutonium From Nuclear Weapons U.S. Removes Nine Metric Tons of Plutonium From Nuclear Weapons Stockpile U.S. Removes Nine Metric Tons of Plutonium From Nuclear Weapons Stockpile September 17, 2007 - 2:41pm Addthis Declaration Reinforces U.S. Commitment to Nonproliferation VIENNA, AUSTRIA - Secretary of Energy Samuel W. Bodman today announced that the Department of Energy's National Nuclear Security Administration (NNSA) will remove nine metric tons of plutonium from further use as fissile material in U.S. nuclear weapons, signifying the Bush Administration's ongoing commitment to nonproliferation. Nine metric tons of plutonium is enough material to make over 1,000 nuclear weapons. The Secretary made today's announcement while speaking before the International Atomic Energy Agency's annual general conference.

6

U.S. Removes Nine Metric Tons of Plutonium From Nuclear Weapons Stockpile |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Removes Nine Metric Tons of Plutonium From Nuclear Weapons Removes Nine Metric Tons of Plutonium From Nuclear Weapons Stockpile U.S. Removes Nine Metric Tons of Plutonium From Nuclear Weapons Stockpile September 17, 2007 - 2:41pm Addthis Declaration Reinforces U.S. Commitment to Nonproliferation VIENNA, AUSTRIA - Secretary of Energy Samuel W. Bodman today announced that the Department of Energy's National Nuclear Security Administration (NNSA) will remove nine metric tons of plutonium from further use as fissile material in U.S. nuclear weapons, signifying the Bush Administration's ongoing commitment to nonproliferation. Nine metric tons of plutonium is enough material to make over 1,000 nuclear weapons. The Secretary made today's announcement while speaking before the International Atomic Energy Agency's annual general conference.

7

How do I convert between short tons and metric tons? - FAQ - U ...  

U.S. Energy Information Administration (EIA)

Energy Conversion Calculators. Metric and Other Physical Conversion Factors. Last reviewed: September 13, 2013. Other FAQs about Coal.

8

How do I convert between short tons and metric tons? - FAQ - U ...  

U.S. Energy Information Administration (EIA)

Energy Conversion Calculators. Metric and Other Physical Conversion Factors. Last reviewed: September 13, 2013. Other FAQs about Prices.

9

Improving AMBER, an MT evaluation metric  

Science Conference Proceedings (OSTI)

A recent paper described a new machine translation evaluation metric, AMBER. This paper describes two changes to AMBER. The first one is incorporation of a new ordering penalty; the second one is the use of the downhill simplex algorithm to tune the ...

Boxing Chen; Roland Kuhn; George Foster

2012-06-01T23:59:59.000Z

10

DOE Hydrogen and Fuel Cells Program Record 11002: Number of Cars Equivalent to 100 Metric Tons of Avoided Greenhouse Gases per Year  

NLE Websites -- All DOE Office Websites (Extended Search)

02 Date: January 5, 2011 02 Date: January 5, 2011 Title: Number of Cars Equivalent to 100 Metric Tons of Avoided Greenhouse Gases per Year Originator: Andrea Chew & Tien Nguyen Approved by: Sunita Satyapal Date: January 25, 2011 A conventional mid-size gasoline car emits 0.45 kg of greenhouse gases (GHG) per mile. 1 One hundred (100) metric tons (t) of GHG per year are equivalent to emissions from 17 conventional gasoline cars. Item: The GHG emissions cited above are from an analysis record prepared by the Department of Energy's Fuel Cell Technologies and Vehicle Technologies Programs on life-cycle emissions of greenhouse gases and petroleum use for several light-duty vehicles. 1 For cars that are between 1 and 5 years old, the average mileage is approximately 13,000,

11

How do I convert between short tons and metric tons? - FAQ - U.S ...  

U.S. Energy Information Administration (EIA)

Financial market analysis and financial data for major energy companies ... What are the sources of energy-related carbon dioxide emissions by type of fuel ...

12

Transportation system benefits of early deployment of a 75-ton multipurpose canister system  

SciTech Connect

In 1993 the US Civilian Radioactive Waste Management System (CRWMS) began developing two multipurpose canister (MPC) systems to provide a standardized method for interim storage and transportation of spent nuclear fuel (SNF) at commercial nuclear power plants. One is a 75-ton concept with an estimated payload of about 6 metric tons (t) of SNF, and the other is a 125-ton concept with an estimated payload of nearly 11 t of SNF. These payloads are two to three times the payloads of the largest currently certified US rail transport casks, the IF-300. Although is it recognized that a fully developed 125-ton MPC system is likely to provide a greater cost benefit, and radiation exposure benefit than the lower-capacity 75-ton MPC, the authors of this paper suggest that development and deployment of the 75-ton MPC prior to developing and deploying a 125-ton MPC is a desirable strategy. Reasons that support this are discussed in this paper.

Wankerl, M.W. [Oak Ridge National Lab., TN (United States); Schmid, S.P. [Science Applications International Corp., Oak Ridge, TN (United States)

1995-12-31T23:59:59.000Z

13

Saving Tons at the Register  

SciTech Connect

Duct losses have a significant effect on the efficiency of delivering space cooling to U.S. homes. This effect is especially dramatic during peak demand periods where half of the cooling equipment's output can be wasted. Improving the efficiency of a duct system can save energy, but can also allow for downsizing of cooling equipment without sacrificing comfort conditions. Comfort, and hence occupant acceptability, is determined not only by steady-state temperatures, but by how long it takes to pull down the temperature during cooling start-up, such as when the occupants come home on a hot summer afternoon. Thus the delivered tons of cooling at the register during start-up conditions are critical to customer acceptance of equipment downsizing strategies. We have developed a simulation technique which takes into account such things as weather, heat-transfer (including hot attic conditions), airflow, duct tightness, duct location and insulation, and cooling equipment performance to determine the net tons of cooling delivered to occupied space. Capacity at the register has been developed as an improvement over equipment tonnage as a system sizing measure. We use this concept to demonstrate that improved ducts and better system installation is as important as equipment size, with analysis of pull-down capability as a proxy for comfort. The simulations indicate that an improved system installation including tight ducts can eliminate the need for almost a ton of rated equipment capacity in a typical new 2,000 square foot house in Sacramento, California. Our results have also shown that a good duct system can reduce capacity requirements and still provide equivalent cooling at start-up and at peak conditions.

Brown, Karl; Seigel, Jeff; Sherman, Max; Walker, Iain

1998-05-01T23:59:59.000Z

14

Metric Program  

Science Conference Proceedings (OSTI)

... The NIST metric program encourages the use of the SI in all facets of education, including honing of worker skills. All Levels of Government. ...

2013-01-11T23:59:59.000Z

15

Metric Units  

Science Conference Proceedings (OSTI)

... A, B, C, D, E, F, G, H, I, J. 1, Steam Point Calculator: Metric Units, Elevation Converter, ... 6, Height of steam point apparatus above ground (m), 0, m, ...

2011-12-22T23:59:59.000Z

16

Metric Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

MODERN GRID S T R A T E G Y Smart Grid Metrics Monitoring our Progress Smart Grid Implementation Workshop Joe Miller - Modern Grid Team June 19, 2008 1 Conducted by the National...

17

Aligning tool set metrics for operation in a Multi Technology High Mix Low Volume manufacturing environment  

E-Print Network (OSTI)

Ireland Fab Operations (IFO) is transitioning and leading the way within Intel to Multi- Technology High Mix Low Volume (MT-HMLV) manufacturing. To avoid errors in estimating metrics, specific capacity tool set metrics for ...

Naughton, Alyson B. (Alyson Bourne)

2005-01-01T23:59:59.000Z

18

EU Metric Directive  

Science Conference Proceedings (OSTI)

... View EU Metric Directive Commission Services Working Document PDF ... of European Union (EU) Meeting on Metric Directives (2005); Packaging ...

2012-12-13T23:59:59.000Z

19

NETL: News Release - DOE Partner Begins Injecting 50,000 Tons of Carbon  

NLE Websites -- All DOE Office Websites (Extended Search)

February 27, 2009 February 27, 2009 DOE Partner Begins Injecting 50,000 Tons of Carbon Dioxide in Michigan Basin Project Expected to Advance National Carbon Sequestration Program, Create Jobs Washington, DC-Building on an initial injection project of 10,000 metric tons of carbon dioxide (CO2) into a Michigan geologic formation, a U.S. Department of Energy (DOE) team of regional partners has begun injecting 50,000 additional tons into the formation, which is believed capable of storing hundreds of years worth of CO2, a greenhouse gas that contributes to climate change. MORE INFO Learn more about DOE's Regional Carbon Sequestration Partnership Program DOE's Midwest Regional Carbon Sequestration Partnership (MRCSP), led by Battelle of Columbus, Ohio, began injecting the CO2 this week in the

20

Hanford Landfill Reaches 15 Million Tons Disposed - Waste Disposal...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Million Tons Disposed - Waste Disposal Mark Shows Success Cleaning Up River Corridor Hanford Landfill Reaches 15 Million Tons Disposed - Waste Disposal Mark Shows Success...

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Metric Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

MODERN GRID MODERN GRID S T R A T E G Y Smart Grid Metrics Monitoring our Progress Smart Grid Implementation Workshop Joe Miller - Modern Grid Team June 19, 2008 1 Conducted by the National Energy Technology Laboratory Funded by the U.S. Department of Energy, Office of Electricity Delivery and Energy Reliability 2 Office of Electricity Delivery and Energy Reliability MODERN GRID S T R A T E G Y Many are working on the Smart Grid FERC DOE-OE Grid 2030 GridWise Alliance EEI NERC (FM) DOE/NETL Modern Grid Strategy GridWise Program GridWorks NW GridWise Testbed GridApps CERTS DOE-OE CEC PIER NYSERDA CPUC AMI Galvin Initiative EPRI Intelligrid PSERC NIST GWAC Utility AMI Open AMI CEC PIER EPACT05 Nat'al Labs EISA-2007 IEEE DOE Smart Grid Task Force 3 Office of Electricity Delivery and Energy Reliability

22

NEWTON's Metric System Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Please select any link below. Search this page, using your web browser's search function. Please select any link below. Search this page, using your web browser's search function. Metric System References Do you have a great metric reference link? Please click our Ideas page. Featured Reference Links: Metric (SI) References Metric (SI) References Having trouble with the metric system? Visit the National Institute of Standards and Technology's site about the rules and style conventions of the International System of Units (SI). The Metric System The Metric System Need another reference? Try this site provided by Wikipedia that discusses the metric system and its history in depth. Metric Converter Metric Converter Need to convert to Metric? OnlineConversion.com allows you to convert just about anything to just about anything else. This will let you easily from metric to US Standard notation, and vice versa.

23

DOE Partner Begins Injecting 50,000 Tons of CO2 in Michigan Basin |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Partner Begins Injecting 50,000 Tons of CO2 in Michigan Basin Partner Begins Injecting 50,000 Tons of CO2 in Michigan Basin DOE Partner Begins Injecting 50,000 Tons of CO2 in Michigan Basin February 27, 2009 - 12:00pm Addthis Washington, D.C. -- Building on an initial injection project of 10,000 metric tons of carbon dioxide (CO2) into a Michigan geologic formation, a U.S. Department of Energy (DOE) team of regional partners has begun injecting 50,000 additional tons into the formation, which is believed capable of storing hundreds of years worth of CO2, a greenhouse gas that contributes to climate change. DOE's Midwest Regional Carbon Sequestration Partnership (MRCSP), led by Battelle of Columbus, Ohio, began injecting the CO2 this week in the Michigan Basin near Gaylord, Mich., in a deep saline formation, the Silurian-age Bass Island dolomite. The MRCSP is one of seven partnerships

24

CYBER SECURITY METRICS AND MEASURES  

Science Conference Proceedings (OSTI)

... CYBER SECURITY METRICS AND MEASURES ... Keywords: cyber security; metrics; measures; software; computer systems; IT ...

2013-05-07T23:59:59.000Z

25

DOE Will Dispose of 34 Metric Tons of Plutonium by Turning it...  

NLE Websites -- All DOE Office Websites (Extended Search)

in nuclear reactors. The decision follows an exhaustive Administration review of non-proliferation programs, including alternative technologies to dispose of surplus plutonium to...

26

Table 11.3 Methane Emissions, 1980-2009 (Million Metric Tons ...  

U.S. Energy Information Administration (EIA)

Climate Change's Guidelines for National Greenhouse Gas Inventories (2006 and revised 1996 guidelines)—see http://www.ipcc-nggip.iges.or.jp/public/gl/invs6.html; ...

27

Table 11.3 Methane Emissions, 1980-2009 (Million Metric Tons ...  

U.S. Energy Information Administration (EIA)

Burning: Total 5: 1980. 3.06: 4.42: NA: 0.28: 0.45: 8.20: 10.52: 0.52: 11.04: 5.47: 2.87: 0.48: 0.04: 8.86: ... 4 Consumption of coal, petroleum, natural gas, and ...

28

Table 11.3 Methane Emissions, 1980-2009 (Million Metric Tons of ...  

U.S. Energy Information Administration (EIA)

Short-Term Energy Outlook › Annual Energy Outlook ... 1984 forward, industrial and domestic wastewater. Sources: U.S. Energy Information Administration ...

29

Metrics for enterprise transformation  

E-Print Network (OSTI)

The objective of this thesis is to depict the role of metrics in the evolving journey of enterprise transformation. To this end, three propositions are explored: (i) metrics and measurement systems drive transformation, ...

Blackburn, Craig D. (Craig David), S. M. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

30

SYSTRAN MT dictionary development  

E-Print Network (OSTI)

SYSTRAN has demonstrated success in the MT field with its long history spanning nearly 30 years. As a general-purpose fully automatic MT system, SYSTRAN employs a transfer approach. Among its several components, large, carefully encoded, high-quality dictionaries are critical to SYSTRAN's translation capability. A total of over 2.4 million words and expressions are now encoded in the dictionaries for twelve source language systems (30 language pairs- one per year!). SYSTRAN'S dictionaries, along with its parsers, transfer modules, and generators, have been tested on huge amounts of text, and contain large terminology databases covering various domains and detailed linguistic rules. Using these resources, SYSTRAN MT systems have successfully served practical translation needs for nearly 30 years, and built a reputation in the MT world for their large, mature dictionaries. This paper describes various aspects of SYSTRAN MT dictionary development as an important part of the development and refinement of SYSTRAN MT systems. There are 4 major sections: 1) Role and Importance of Dictionaries in the SYSTRAN Paradigm describes the importance of coverage and depth in the dictionaries; 2) Dictionary Structure discusses the specifics of

Laurie Gerber; Jin Yang

1997-01-01T23:59:59.000Z

31

Performance Metrics for Proteomics  

Science Conference Proceedings (OSTI)

... for Cancer (CPTC), NIST researchers are developing specific and quantitative metrics, implemented in a software pipeline, for evaluating sources ...

2013-07-10T23:59:59.000Z

32

Metric Conversion Guide  

Science Conference Proceedings (OSTI)

...Documents, U.S. Government Printing Office, Washington, DC 20402-9325 Metric Editorial Guide, 5th ed. (revised), 1993,

33

Metric Conversion Guide  

Science Conference Proceedings (OSTI)

...Documents, U.S. Government Printing Office, Washington, DC 20402-9325 Metric Editorial Guide , 5th ed. (revised), 1993,

34

ARM - 2008 Performance Metrics  

NLE Websites -- All DOE Office Websites (Extended Search)

8 Performance Metrics 8 Performance Metrics Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) ARM Science Team Meetings User Meetings Annual Meetings of the Atmospheric System Research (ASR) Science Team and Fall Working Groups Accomplishments Read about the 20 years of accomplishments (PDF, 696KB) from the ARM Program and user facility. Performance Metrics ASR Metrics 2009 2008 2007 2006 2008 Performance Metrics Each year, the ARM Program must submit to DOE an overall performance measure related to scientific achievement. The overall performance measure includes specific metrics for reporting progress each quarter. This reporting process includes support documentation (usually a report or data file) appropriate for the metric. Overall Performance Measures

35

Property:OpenEI/CETSI/Metrics | Open Energy Information  

Open Energy Info (EERE)

Metrics Metrics Jump to: navigation, search Property Name OpenEI/CETSI/Metrics Property Type Text Description Environmental aspects and performance metrics associated with the resource. Pages using the property "OpenEI/CETSI/Metrics" Showing 25 pages using this property. (previous 25) (next 25) A An Overview of Existing Wind Energy Ordinances + The objective of these communities is to facilitate and regulate the development of Wind Energy Conversion Systems. Animal Farm Powers Village + The plant will produce 350 kilowatts per hour, "enough to supply 175 homes with electricity). C City of Aspen Climate Action Plan + The Climate Action Plan calls for greenhouse gas reductions of 30 percent by 2020 and 80 percent by 2050 from its 2004 baseline. Performance metrics are quantified by tons of CO2-e reduced. Based on a 2007 update to the baseline emissions inventory, the community achieved emissions reductions of 68,380 tons. The energy and environmental achievements as of the Plan's adoption in 2007 are outlined as updates within the Plan. To date, there has been no progress report on the Climate Action Plan per se, however the City's environmental achievements are described in the biennial Sustainability Report available at: http://www.aspenpitkin.com/Portals/0/docs/City/GreenInitiatives/enviro_sustainability_report_2008.pdf

36

Ton père et autre débris ; suivi de Entretien.  

E-Print Network (OSTI)

??Ce mémoire en création littéraire est constitué de deux parties. La première, Ton père et autres débris, est un récit composé de vingt-quatre tableaux divisés… (more)

Grenier, Jacques

2006-01-01T23:59:59.000Z

37

KCP relocates 18-ton machine | National Nuclear Security Administratio...  

NLE Websites -- All DOE Office Websites (Extended Search)

relocates 18-ton machine | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

38

Metrics and Measures - SAMATE  

Science Conference Proceedings (OSTI)

... For instance, weather reports give hurricane intensity on ... 2006] proposed a metric for static analysis tools. ... depending on whether the tool claims to ...

2013-09-09T23:59:59.000Z

39

Metric in Sports: Bicycling  

Science Conference Proceedings (OSTI)

Bicycling. Tour de France. ... Up-to-date information on the Tour de France 2011 can be found at the official site. Metric Biking Events. ...

2011-12-23T23:59:59.000Z

40

INEAP Metrics Report  

Science Conference Proceedings (OSTI)

... Opportunities of the Current Usage of Metrics; ... consumption of non-local, non-renewable, non-recyclable ... recycled materials, water, energy and fuels ...

2012-04-30T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Tons of Heavy Metals in Mill Creek Sediments Heather Freeman  

E-Print Network (OSTI)

with industries. Paper, woolen, flour, and cotton mills, starch factories, slaughterhouses, distilleriesTons of Heavy Metals in Mill Creek Sediments Heather Freeman 8/30/99 Geology Department Advisors: Dr. Kees DeJong Dr. Barry Manyard Dr. David Nash #12;Tons of heavy metals in Mill Creek sediments

Maynard, J. Barry

42

Department of Energy Releases New 'Billion-Ton' Study Highlighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

'Billion-Ton' Study 'Billion-Ton' Study Highlighting Opportunities for Growth in Bioenergy Resources Department of Energy Releases New 'Billion-Ton' Study Highlighting Opportunities for Growth in Bioenergy Resources August 10, 2011 - 3:41pm Addthis Washington, D.C. - The U.S. Department of Energy today released a report - 2011 U.S. Billion-Ton Update: Biomass Supply for a Bioenergy and Bioproducts Industry - detailing U.S. biomass feedstock potential nationwide. The report examines the nation's capacity to produce a billion dry tons of biomass resources annually for energy uses without impacting other vital U.S. farm and forest products, such as food, feed, and fiber crops. The study provides industry, policymakers, and the agricultural community with county-level data and includes analyses of

43

Metrics White Paper Introduction  

E-Print Network (OSTI)

Metrics White Paper March 2010 Introduction Through the years, Unidata has conducted metrics, strategic partners, presentations, scientific papers, budgets, proposals, and other instances where or tools from Unidata's web site. Determining the classification of data to be captured, ad hoc committees

44

Surveillance Metrics Sensitivity Study  

Science Conference Proceedings (OSTI)

In September of 2009, a Tri-Lab team was formed to develop a set of metrics relating to the NNSA nuclear weapon surveillance program. The purpose of the metrics was to develop a more quantitative and/or qualitative metric(s) describing the results of realized or non-realized surveillance activities on our confidence in reporting reliability and assessing the stockpile. As a part of this effort, a statistical sub-team investigated various techniques and developed a complementary set of statistical metrics that could serve as a foundation for characterizing aspects of meeting the surveillance program objectives. The metrics are a combination of tolerance limit calculations and power calculations, intending to answer level-of-confidence type questions with respect to the ability to detect certain undesirable behaviors (catastrophic defects, margin insufficiency defects, and deviations from a model). Note that the metrics are not intended to gauge product performance but instead the adequacy of surveillance. This report gives a short description of four metrics types that were explored and the results of a sensitivity study conducted to investigate their behavior for various inputs. The results of the sensitivity study can be used to set the risk parameters that specify the level of stockpile problem that the surveillance program should be addressing.

Bierbaum, R; Hamada, M; Robertson, A

2011-11-01T23:59:59.000Z

45

Surveillance metrics sensitivity study.  

SciTech Connect

In September of 2009, a Tri-Lab team was formed to develop a set of metrics relating to the NNSA nuclear weapon surveillance program. The purpose of the metrics was to develop a more quantitative and/or qualitative metric(s) describing the results of realized or non-realized surveillance activities on our confidence in reporting reliability and assessing the stockpile. As a part of this effort, a statistical sub-team investigated various techniques and developed a complementary set of statistical metrics that could serve as a foundation for characterizing aspects of meeting the surveillance program objectives. The metrics are a combination of tolerance limit calculations and power calculations, intending to answer level-of-confidence type questions with respect to the ability to detect certain undesirable behaviors (catastrophic defects, margin insufficiency defects, and deviations from a model). Note that the metrics are not intended to gauge product performance but instead the adequacy of surveillance. This report gives a short description of four metrics types that were explored and the results of a sensitivity study conducted to investigate their behavior for various inputs. The results of the sensitivity study can be used to set the risk parameters that specify the level of stockpile problem that the surveillance program should be addressing.

Hamada, Michael S. (Los Alamos National Laboratory); Bierbaum, Rene Lynn; Robertson, Alix A. (Lawrence Livermore Laboratory)

2011-09-01T23:59:59.000Z

46

EM Corporate Performance Metrics, Complex Level  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Complex Level Complex Level July, 2013 Performance Measure Unit Lifecycle Total Estimate Pre-2013 Lifecycle Values 2013 Target 2014 Target Pu packaged for long-term disposition Number of Containers 5,089 5,089 5,089 5,089 eU packaged for disposition Number of Containers 8,198 8,016 8,016 8,016 Pu/U residues packaged for disposition Kilograms of Bulk 107,828 107,828 107,828 107,828 DU & U packaged for disposition Metric Tons 736,801 32,452 45,317 76,817 Liquid Waste eliminated Thousands of Gallons 91,907 5,340 6,260 6,812 Liquid Waste Tanks closed Number of Tanks 239 11 11 13 HLW packaged for disposition Number of Containers 24,183 3,802 4,077 4,283 SNF packaged for disposition Metric Tons of Heavy Metal 2,450 2,128 2,128 2,128

47

ARM - 2009 Performance Metrics  

NLE Websites -- All DOE Office Websites (Extended Search)

9 Performance Metrics 9 Performance Metrics Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) ARM Science Team Meetings User Meetings Annual Meetings of the Atmospheric System Research (ASR) Science Team and Fall Working Groups Accomplishments Read about the 20 years of accomplishments (PDF, 696KB) from the ARM Program and user facility. Performance Metrics ASR Metrics 2009 2008 2007 2006 2009 Performance Metrics Improve Climate Models - Develop a coupled climate model with fully interactive carbon and sulfur cycles, as well as dynamic vegetation to enable simulations of aerosol effects, carbon chemistry, and carbon sequestration by the land surface and oceans and the interactions between the carbon cycle and climate. In fiscal year 2009: Provide improved climate

48

ARM - 2007 Performance Metrics  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Performance Metrics 7 Performance Metrics Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) ARM Science Team Meetings User Meetings Annual Meetings of the Atmospheric System Research (ASR) Science Team and Fall Working Groups Accomplishments Read about the 20 years of accomplishments (PDF, 696KB) from the ARM Program and user facility. Performance Metrics ASR Metrics 2009 2008 2007 2006 2007 Performance Metrics A Single Column Model (SCM) represents the evolution of the atmosphere in a single grid box of a Global Climate Model (GCM). This illustration represents the observing strategy of ARM, which takes continuous atmospheric observations from fixed sites in three climate regimes around the world. A Single Column Model (SCM) represents the evolution of the atmosphere in a

49

STAR METRICS | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

STAR METRICS STAR METRICS May 4, 2011 - 4:47pm Addthis Energy continues to define Phase II of the STAR METRICS program, a collaborative initiative to track Research and Development...

50

Hanford Landfill Reaches 15 Million Tons Disposed - Waste Disposal Mark  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Landfill Reaches 15 Million Tons Disposed - Waste Disposal Landfill Reaches 15 Million Tons Disposed - Waste Disposal Mark Shows Success Cleaning Up River Corridor Hanford Landfill Reaches 15 Million Tons Disposed - Waste Disposal Mark Shows Success Cleaning Up River Corridor July 9, 2013 - 12:00pm Addthis Media Contacts Cameron Hardy, DOE, (509) 376-5365 Cameron.Hardy@rl.doe.gov Mark McKenna, WCH, (509) 372-9032 media@wch-rcc.com RICHLAND, Wash. - The U.S. Department of Energy (DOE) and its contractors have disposed of 15 million tons of contaminated material at the Environmental Restoration Disposal Facility (ERDF) since the facility began operations in 1996. Removing contaminated material and providing for its safe disposal prevents contaminants from reaching the groundwater and the Columbia River. ERDF receives contaminated soil, demolition debris, and solid waste from

51

Department of Energy Releases New 'Billion-Ton' Study Highlighting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

report supports the conclusion of the original 2005 Billion-Ton Study with added in-depth production and costs analyses and sustainability studies. The 2011 report uses more...

52

Buildings Performance Metrics Terminology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy's Commercial Building Initiative Page 1 Energy's Commercial Building Initiative Page 1 January 2009 Buildings Performance Metrics Terminology To clarify how the terms are used in the Department of Energy's Performance Metrics Research Project, a list of terms related to performance metrics are defined and include examples and comments. Visit www.commercialbuildings.energy.gov/performance_metrics.html to learn more. Baseline - a standard reference case used as a basis for comparison Examples: a simulation model of an ASHRAE 90.1 compliant building, control building, measurement of energy consumption prior to application of an energy conservation measure Comments: Establishing a clearly defined baseline very important and is often the most difficult task. Defining a repeatable baseline is essential if the work is to be compared to results of other

53

Appendix B Metric  

Gasoline and Diesel Fuel Update (EIA)

Metric Metric and Thermal Conversion Tables Metric Conversions Table B1 presents Summary Statistics for Natural Gas in the United States for 1992 through 1996 in metric units of measure. Volumes are shown in cubic meters instead of cubic feet. Prices are shown in dollars per thousand cubic meters instead of dollars per thousand cubic feet. The data in this table have been converted from the data that appear in Table 1 of this report. Thermal Conversions Table B2 presents the thermal (Btu) conversion factors and the converted data for natural gas supply and disposition from 1992 through 1996. A brief documentation for the thermal conversion factors follows: * Marketed Production. The conversion factor is calcu- lated by adding the total heat content of dry production to the total heat content of extraction loss and dividing the resulting sum by the total quantity of dry production and extraction

54

Cyber threat metrics.  

SciTech Connect

Threats are generally much easier to list than to describe, and much easier to describe than to measure. As a result, many organizations list threats. Fewer describe them in useful terms, and still fewer measure them in meaningful ways. This is particularly true in the dynamic and nebulous domain of cyber threats - a domain that tends to resist easy measurement and, in some cases, appears to defy any measurement. We believe the problem is tractable. In this report we describe threat metrics and models for characterizing threats consistently and unambiguously. The purpose of this report is to support the Operational Threat Assessment (OTA) phase of risk and vulnerability assessment. To this end, we focus on the task of characterizing cyber threats using consistent threat metrics and models. In particular, we address threat metrics and models for describing malicious cyber threats to US FCEB agencies and systems.

Frye, Jason Neal; Veitch, Cynthia K.; Mateski, Mark Elliot; Michalski, John T.; Harris, James Mark; Trevino, Cassandra M.; Maruoka, Scott

2012-03-01T23:59:59.000Z

55

NIST Open Machine Translation (OpenMT) Evaluation  

Science Conference Proceedings (OSTI)

DARPA TIDES Machine Translation 2004 Evaluation (MT04). Current and Recent DARPA TIDES MT Activities. MT04 takes ...

56

Smart Grid Characteristics, Values, and Metrics | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Characteristics, Values, and Metrics Smart Grid Characteristics, Values, and Metrics DOE Smart Grid Implementation Worksho Smart Grid Characteristics, Values, and Metrics More...

57

Defining a Standard Metric for Electricity Savings  

SciTech Connect

The growing investment by governments and electric utilities in energy efficiency programs highlights the need for simple tools to help assess and explain the size of the potential resource. One technique that is commonly used in this effort is to characterize electricity savings in terms of avoided power plants, because it is easier for people to visualize a power plant than it is to understand an abstraction such as billions of kilowatt-hours. Unfortunately, there is no standardization around the characteristics of such power plants. In this letter we define parameters for a standard avoided power plant that have physical meaning and intuitive plausibility, for use in back-of-the-envelope calculations. For the prototypical plant this article settles on a 500 MW existing coal plant operating at a 70percent capacity factor with 7percent T&D losses. Displacing such a plant for one year would save 3 billion kW h per year at the meter and reduce emissions by 3 million metric tons of CO2 per year. The proposed name for this metric is the Rosenfeld, in keeping with the tradition among scientists of naming units in honor of the person most responsible for the discovery and widespread adoption of the underlying scientific principle in question--Dr. Arthur H. Rosenfeld.

Brown, Marilyn; Akbari, Hashem; Blumstein, Carl; Koomey, Jonathan; Brown, Richard; Calwell, Chris; Carter, Sheryl; Cavanagh, Ralph; Chang, Audrey; Claridge, David; Craig, Paul; Diamond, Rick; Eto, Joseph H.; Fulkerson, William; Gadgil, Ashok; Geller, Howard; Goldemberg, Jose; Goldman, Chuck; Goldstein, David B.; Greenberg, Steve; Hafemeister, David; Harris, Jeff; Harvey, Hal; Heitz, Eric; Hirst, Eric; Hummel, Holmes; Kammen, Dan; Kelly, Henry; Laitner, Skip; Levine, Mark; Lovins, Amory; Masters, Gil; McMahon, James E.; Meier, Alan; Messenger, Michael; Millhone, John; Mills, Evan; Nadel, Steve; Nordman, Bruce; Price, Lynn; Romm, Joe; Ross, Marc; Rufo, Michael; Sathaye, Jayant; Schipper, Lee; Schneider, Stephen H; Sweeney, James L; Verdict, Malcolm; Vorsatz, Diana; Wang, Devra; Weinberg, Carl; Wilk, Richard; Wilson, John; Worrell, Ernst

2009-03-01T23:59:59.000Z

58

Metric Properties of Euclidean Buildings  

E-Print Network (OSTI)

This is a survey on nondiscrete euclidean buildings, with a focus on metric properties of these spaces.

Kramer, Linus

2010-01-01T23:59:59.000Z

59

Performance Metrics for Commercial Buildings  

SciTech Connect

Commercial building owners and operators have requested a standard set of key performance metrics to provide a systematic way to evaluate the performance of their buildings. The performance metrics included in this document provide standard metrics for the energy, water, operations and maintenance, indoor environmental quality, purchasing, waste and recycling and transportation impact of their building. The metrics can be used for comparative performance analysis between existing buildings and industry standards to clarify the impact of sustainably designed and operated buildings.

Fowler, Kimberly M.; Wang, Na; Romero, Rachel L.; Deru, Michael P.

2010-09-30T23:59:59.000Z

60

On Multi-Metric Spaces  

E-Print Network (OSTI)

A Smarandache multi-space is a union of $n$ spaces $A_1,A_2,..., A_n$ with some additional conditions holding. Combining Smarandache multi-spaces with classical metric spaces, the conception of multi-metric space is introduced. Some characteristics of a multi-metric space are obtained and Banach's fixed-point theorem is generalized in this paper.

Linfan Mao

2005-10-22T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Metrics And The Software Designer  

E-Print Network (OSTI)

This paper will focus on these key topics in an effort to propose a means by which software designers can become effective contributors in the process of metrics collection analysis and reporting. METRICS AND THE SOFTWARE DESIGNER 4 2. KEY TOPICS FOR METRICS USAGE BY DESIGNERS

John T. Kalisz

1996-01-01T23:59:59.000Z

62

Category:Billings, MT | Open Energy Information  

Open Energy Info (EERE)

MT MT Jump to: navigation, search Go Back to PV Economics By Location Media in category "Billings, MT" The following 16 files are in this category, out of 16 total. SVFullServiceRestaurant Billings MT NorthWestern Corporation.png SVFullServiceRestauran... 64 KB SVHospital Billings MT NorthWestern Corporation.png SVHospital Billings MT... 62 KB SVLargeHotel Billings MT NorthWestern Corporation.png SVLargeHotel Billings ... 62 KB SVLargeOffice Billings MT NorthWestern Corporation.png SVLargeOffice Billings... 62 KB SVMediumOffice Billings MT NorthWestern Corporation.png SVMediumOffice Billing... 62 KB SVMidriseApartment Billings MT NorthWestern Corporation.png SVMidriseApartment Bil... 63 KB SVOutPatient Billings MT NorthWestern Corporation.png SVOutPatient Billings ...

63

Metric adjusted skew information  

E-Print Network (OSTI)

We extend the concept of Wigner-Yanase-Dyson skew information to something we call ``metric adjusted skew information'' (of a state with respect to a conserved observable). This ``skew information'' is intended to be a non-negative quantity bounded by the variance (of an observable in a state) that vanishes for observables commuting with the state. We show that the skew information is a convex function on the manifold of states. It also satisfies other requirements, proposed by Wigner and Yanase, for an effective measure-of-information content of a state relative to a conserved observable. We establish a connection between the geometrical formulation of quantum statistics as proposed by Chentsov and Morozova and measures of quantum information as introduced by Wigner and Yanase and extended in this article. We show that the set of normalized Morozova-Chentsov functions describing the possible quantum statistics is a Bauer simplex and determine its extreme points. We determine a particularly simple skew information, the ``lambda-skew information,'' parametrized by a lambda in (0,1], and show that the convex cone this family generates coincides with the set of all metric adjusted skew informations. Key words: Skew information, convexity, monotone metric, Morozova-Chentsov function, lambda-skew information.

Frank Hansen

2006-07-23T23:59:59.000Z

64

THERMAL MODELING ANALYSIS OF SRS 70 TON CASK  

SciTech Connect

The primary objective of this work was to perform the thermal calculations to evaluate the Material Test Reactor (MTR) fuel assembly temperatures inside the SRS 70-Ton Cask loaded with various bundle powers. MTR fuel consists of HFBR, MURR, MIT, and NIST. The MURR fuel was used to develop a bounding case since it is the fuel with the highest heat load. The results will be provided for technical input for the SRS 70 Ton Cask Onsite Safety Assessment. The calculation results show that for the SRS 70 ton dry cask with 2750 watts total heat source with a maximum bundle heat of 670 watts and 9 bundles of MURR bounding fuel, the highest fuel assembly temperatures are below about 263 C. Maximum top surface temperature of the plastic cover is about 112 C, much lower than its melting temperature 260 C. For 12 bundles of MURR bounding fuel with 2750 watts total heat and a maximum fuel bundle of 482 watts, the highest fuel assembly temperatures are bounded by the 9 bundle case. The component temperatures of the cask were calculated by a three-dimensional computational fluid dynamics approach. The modeling calculations were performed by considering daily-averaged solar heat flux.

Lee, S.; Jordan, J.; Hensel, S.

2011-03-08T23:59:59.000Z

65

Metric Selection for Ecosystem Restoration  

E-Print Network (OSTI)

managers identify the best metrics to evaluate and select the recommended restoration plan, monitor and assess progress toward achieving project objectives, and, if necessary, inform adaptive management decisions. Performance metrics, or measurable system components used to estimate and track the state of critical aspects of the project, are often the basis for project decision making and furthering scientific understanding. As such, ecosystem restoration planners should take time to carefully select an appropriate and effective metric set. To help planners with this task, this technical note accomplishes the following: 1. Reviews current USACE ecosystem restoration planning and monitoring policy, regulations and guidelines. 2. Explains the importance of metric selection and its roles during planning and post-construction monitoring and assessment. 3. Reviews common options for identifying and selecting metrics including conceptual modeling, historical precedence, and best professional judgment. 4. Presents two metric evaluation methods, screening and multi-criteria decision analysis. 5. Discusses metric application to ecosystem restoration project planning and monitoring.

Matteo Convertino; Kelsie Baker; Connie Lu; John T. Vogel; Kyle Mckay; Igor Linkov

2013-01-01T23:59:59.000Z

66

Analyses of sweep-up, ejecta, and fallback material from the 4250 metric ton high explosive test ''MISTY PICTURE'  

SciTech Connect

The MISTY PICTURE surface burst was detonated at the White Sands Missle range in May of 1987. The Los Alamos National Laboratory dust characterization program was expanded to help correlate and interrelate aspects of the overall MISTY PICTURE dust and ejecta characterization program. Pre-shot sampling of the test bed included composite samples from 15 to 75 m distance from Surface Ground Zero (SGZ) representing depths down to 2.5 m, interval samples from 15 to 25 m from SGZ representing depths down to 3m, and samples of surface material (top 0.5 cm) out to distances of 190 m from SGZ. Sweep-up samples were collected in GREG/SNOB gages located within the DPR. All samples were dry-sieved between 8.0 mm and 0.045 mm (16 size fractures); selected samples were analyzed for fines by a contrifugal settling technique. The size distributions were analyzed using spectral decomposition based upon a sequential fragmentation model. Results suggest that the same particle size subpopulations are present in the ejecta, fallout, and sweep-up samples as are present in the pre-shot test bed. The particle size distribution in post-shot environments apparently can be modelled taking into account heterogeneities in the pre-shot test bed and dominant wind direction during and following the shot. 13 refs., 12 figs., 2 tabs.

Wohletz, K.H.; Raymond, R. Jr.; Rawson, G.; Mazzola, T.

1988-01-01T23:59:59.000Z

67

Materials management in an internationally safeguarded fuels reprocessing plant. [1500 and 210 metric tons heavy metal per year  

SciTech Connect

The second volume describes the requirements and functions of materials measurement and accounting systems (MMAS) and conceptual designs for an MMAS incorporating both conventional and near-real-time (dynamic) measurement and accounting techniques. Effectiveness evaluations, based on recently developed modeling, simulation, and analysis procedures, show that conventional accountability can meet IAEA goal quantities and detection times in these reference facilities only for low-enriched uranium. Dynamic materials accounting may meet IAEA goals for detecting the abrupt (1-3 weeks) diversion of 8 kg of plutonium. Current materials accounting techniques probably cannot meet the 1-y protracted-diversion goal of 8 kg for plutonium.

Hakkila, E.A.; Cobb, D.D.; Dayem, H.A.; Dietz, R.J.; Kern, E.A.; Markin, J.T.; Shipley, J.P.; Barnes, J.W.; Scheinman, L.

1980-04-01T23:59:59.000Z

68

Thermodynamic Metrics and Optimal Paths  

E-Print Network (OSTI)

Thermodynamic metrics and optimal paths David A. Sivak ? andmanifold on the space of thermodynamic states. Within theconnection to the existing thermodynamic length formalism,

Sivak, David

2013-01-01T23:59:59.000Z

69

WebMetrics: Technical Overview  

Science Conference Proceedings (OSTI)

VUG Home Page NIST Web Metrics Technical Overview. Technical Overview. NIST Logo. Good usability is critical to the success of a website. ...

70

US-Russia Partnership Reaches Key Milestone in Converting Russian...  

National Nuclear Security Administration (NNSA)

it has monitored the elimination of more than 475 metric tons (MT) of Russian highly enriched uranium (HEU) under a landmark nuclear nonproliferation program, commonly known as...

71

Microsoft PowerPoint - 6_Mitch Hembree_Monday 5-20 1115 NMMSS...  

National Nuclear Security Administration (NNSA)

& Obligations Review Distribution of Depleted Uranium (MT 10) Obligations 2011 Inventory (Metric Tons) 15 ImportExport & Obligations Review Distribution of Enriched Uranium...

72

Dilution Refrigeration of Multi-Ton Cold Masses  

E-Print Network (OSTI)

Dilution refrigeration is the only means to provide continuous cooling at temperatures below 250 mK. Future experiments featuring multi-ton cold masses require a new generation of dilution refrigeration systems, capable of providing a heat sink below 10 mK at cooling powers which exceed the performance of present systems considerably. This thesis presents some advances towards dilution refrigeration of multi-ton masses in this temperature range. A new method using numerical simulation to predict the cooling power of a dilution refrigerator of a given design has been developed in the framework of this thesis project. This method does not only allow to take into account the differences between an actual and an ideal continuous heat exchanger, but also to quantify the impact of an additional heat load on an intermediate section of the dilute stream. In addition, transient behavior can be simulated. The numerical model has been experimentally verified with a dilution refrigeration system which has been designed, ...

Wikus, P; CERN. Geneva

2007-01-01T23:59:59.000Z

73

VOC Exposure Metrics  

NLE Websites -- All DOE Office Websites (Extended Search)

6 6 VOC Exposure Metrics ... and "Sick Building Syndrome" Figure1: The elevated odds ratios (above unity) in this figure suggest that exposures to VOCs from water-based points and solvents are associated with a variety of sick building symptions (* indicates the OR is significant at p < 0.05; ** for p < 0.01). The indoors is often regarded as safe haven from problems associated with outdoor air pollution, but a growing number of reports have suggested that exposures in indoor environments may lead to health problems. One area in which evidence has been accumulating is the relationship between working in office buildings (as opposed to industrial exposure conditions) and a variety of health effects, such as eye, nose, and throat irritation and

74

Normalization of Process Safety Metrics  

E-Print Network (OSTI)

This study is aimed at exploring new process safety metrics for measuring the process safety performance in processing industries. Following a series of catastrophic incidents such as the Bhopal chemical tragedy (1984) and Phillips 66 explosion (1989), process safety became a more important subject than ever. These incidents triggered the development and promulgation of the Process Safety Management (PSM) standard in 1992. While PSM enables management to optimize their process safety programs and organizational risks, there is an emerging need to evaluate the process safety implementation across an organization through measurements. Thus, the process safety metric is applied as a powerful tool that measures safety activities, status, and performance within PSM. In this study, process safety lagging metrics were introduced to describe the contribution of process related parameters in determining the safety performance of an organization. Lagging metrics take process safety incidents as the numerator and divide it by different process-related denominators. Currently a process lagging metric (uses work hours as denominator) introduced by the Center for Chemical Process Safety (CCPS) has been used to evaluate the safety performance in processing industries. However, this lagging metric doesn't include enough process safety information. Therefore, modified denominators are proposed in this study and compared with the existing time-based denominator to validate the effectiveness and applicability of the new metrics. Each proposed metric was validated using available industry data. Statistical unitization method has converted incident rates of different ranges for the convenience of comparison. Trend line analysis was the key indication for determining the appropriateness of new metrics. Results showed that some proposed process-related metrics have the potential as alternatives, along with the time-based metric, to evaluate process safety performance within organizations.

Wang, Mengtian

2012-08-01T23:59:59.000Z

75

Acceptance test report for the Westinghouse 100 ton hydraulic trailer  

DOE Green Energy (OSTI)

The SY-101 Equipment Removal System 100 Ton Hydraulic Trailer was designed and built by KAMP Systems, Inc. Performance of the Acceptance Test Procedure at KAMP`s facility in Ontario, California (termed Phase 1 in this report) was interrupted by discrepancies noted with the main hydraulic cylinder. The main cylinder was removed and sent to REMCO for repair while the trailer was sent to Lampson`s facility in Pasco, Washington. The Acceptance Test Procedure was modified and performance resumed at Lampson (termed Phase 2 in this report) after receipt of the repaired cylinder. At the successful conclusion of Phase 2 testing the trailer was accepted as meeting all the performance criteria specified.

Barrett, R.A.

1995-03-06T23:59:59.000Z

76

Cleanroom Energy Efficiency: Metrics and Benchmarks  

E-Print Network (OSTI)

The key metrics and benchmarks to evaluate the efficiency ofEfficiency: Metrics and Benchmarks Paul A. Mathew, WilliamEfficiency: Metrics and Benchmarks Paul A. Mathew, Ph.D,

Mathew, Paul A.

2012-01-01T23:59:59.000Z

77

Effectiveness of various error metrics in SCEPTRE.  

Science Conference Proceedings (OSTI)

The objective of this project is to investigate accuracy of error metrics in SCEPTRE and produce useful benchmarks, identify metrics that do not work well, identify metrics that do work well, and produce easy to reference results.

Olson, Aaron

2010-08-01T23:59:59.000Z

78

Experimental comparison of software metrics (abstract only)  

Science Conference Proceedings (OSTI)

Software complexity metrics attempt to objectively measure the difficulty involved in creating and maintaining a program. This experiment will compare five complexity metrics as measures for reading comprehension of programs. The metrics compared are ...

Beth Clark

1985-03-01T23:59:59.000Z

79

Function points as a universal software metric  

Science Conference Proceedings (OSTI)

Function point metrics are the most accurate and effective metrics yet developed for software sizing and also for studying software productivity, quality, costs, risks, and economic value. Unlike the older "lines of code" metric function points can be ...

Capers Jones

2013-07-01T23:59:59.000Z

80

Daylight metrics and energy savings  

SciTech Connect

The drive towards sustainable, low-energy buildings has increased the need for simple, yet accurate methods to evaluate whether a daylit building meets minimum standards for energy and human comfort performance. Current metrics do not account for the temporal and spatial aspects of daylight, nor of occupants comfort or interventions. This paper reviews the historical basis of current compliance methods for achieving daylit buildings, proposes a technical basis for development of better metrics, and provides two case study examples to stimulate dialogue on how metrics can be applied in a practical, real-world context.

Mardaljevic, John; Heschong, Lisa; Lee, Eleanor

2009-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Building Technologies Office: Performance Metrics Tiers  

NLE Websites -- All DOE Office Websites (Extended Search)

Performance Metrics Performance Metrics Tiers to someone by E-mail Share Building Technologies Office: Performance Metrics Tiers on Facebook Tweet about Building Technologies Office: Performance Metrics Tiers on Twitter Bookmark Building Technologies Office: Performance Metrics Tiers on Google Bookmark Building Technologies Office: Performance Metrics Tiers on Delicious Rank Building Technologies Office: Performance Metrics Tiers on Digg Find More places to share Building Technologies Office: Performance Metrics Tiers on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score Energy Modeling Software

82

The NERSC Sustained System Performance (SSP) Metric  

E-Print Network (OSTI)

Effective System Performance (ESP) Metric High performancerefers to this metric as the ESP (Effective Peak TFlop/sSystem Performance) 4 . ESP 5 has several characteristics

Kramer, William; Shalf, John; Strohmaier, Erich

2005-01-01T23:59:59.000Z

83

The NERSC Sustained System Performance (SSP) Metric  

E-Print Network (OSTI)

The NERSC Sustained System Performance (SSP) Metric WilliamSSP) metric developed by NERSC for its procurements. Theis important. One system at NERSC consistently slowed down

Kramer, William; Shalf, John; Strohmaier, Erich

2005-01-01T23:59:59.000Z

84

Buildings Performance Metrics Terminology | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Terminology Buildings Performance Metrics Terminology This document provides the terms and definitions used in the Department of Energys Performance Metrics Research...

85

Defining a Standard Metric for Electricity Savings  

NLE Websites -- All DOE Office Websites (Extended Search)

Defining a Standard Metric for Electricity Savings Title Defining a Standard Metric for Electricity Savings Publication Type Report LBNL Report Number LBNL-2213E Year of...

86

Conversion to the Metric System  

U.S. Energy Information Administration (EIA)

Appendix C Conversion to the Metric System Public Law 100–418, the Omnibus Trade and Competitiveness Act of 1988, states: “It is the declared policy of the United ...

87

Segmental alternations and metrical theory  

E-Print Network (OSTI)

This dissertation focuses on phonological alternations that are influenced or constrained by word-internal prosody, i.e. prominence and foot structure, and what these alternations can tell us about metrical theory. Detailed ...

Vaysman, Olga

2009-01-01T23:59:59.000Z

88

Application guide for 25-ton solar system (unitized)  

DOE Green Energy (OSTI)

Arkla has developed a unitary solar system for air conditioning, heating and service hot water loads in commercial buildings of up to 25 tons cooling requirement. A semi-exploded view shows the basic elements of the Arkla system. These elements, listed below, are described in individual sections of the guide in sufficient detail to enable a competent designer to duplicate the Arkla unitary system in a site built system. The elements are: (1) collectors with summary procedure guide; (2) storage/receiver; (3) pumps/piping/valves; (4) controls; (5) chiller; (6) cooling tower; (7) gas boiler back-up; (8) central air handling unit; and (9) service and DHW. Any successful solar HVAC system requires careful analysis of the integration of the elements. This is particularly true due to the large year-round variation in the temperature of the solar HW available. Several items of this nature are discussed in the element sections. Consequently, the designer should review this entire guide before proceeding to individual elements particularly A and B. This guide presumes that the monthly (and design) hot water loads have been determined for the heating, cooling, and service-DHW water Btu requirements. In addition to these normal calculations, an hourly profile for a typical day each month should be made. The hourly profile is necessary to maximize the solar fraction for a given amount of collector surface in conjunction with the size of the storage system; that is, the coincidence, or lack of, sunshine to the instantaneous demands.

Not Available

1983-01-01T23:59:59.000Z

89

Characterization of Arsenic Contamination on Rust from Ton Containers  

Science Conference Proceedings (OSTI)

The speciation and spatial distribution of arsenic on rusted steel surfaces affects both measurement and removal approaches. The chemistry of arsenic residing in the rust of ton containers that held the chemical warfare agents bis(2-chloroethyl)sulfide (sulfur mustard) and 2-chlorovinyldichloroarsine (Lewisite) is of particular interest, because while the agents have been decontaminated, residual arsenic could pose a health or environmental risk. The chemistry and distribution of arsenic in rust samples was probed using imaging secondary ion mass spectrometry (SIMS), X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy, and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX). Arsenic in the +3 and or +5 oxidation state is homogeneously distributed at the very top-most layer of the rust samples, and is intimately associated with iron. Sputter depth profiling followed by SIMS and XPS shows As at a depth of several nm, in some cases in a reduced form. The SEM/EDX experiments show that As is present at a depth of several microns, but is inhomogeneously distributed; most locations contained oxidized As at concentrations of a few percent, however several locations showed very high As in a metallic form. These results indicate that the rust material must be removed if the steel containers are to be cleared of arsenic.

Gary S. Groenewold; Recep Avci; Robert V. Fox; Muhammedin Deliorman; Jayson Suo; Laura Kellerman

2013-01-01T23:59:59.000Z

90

Metric spaces with unique pretangent spaces  

E-Print Network (OSTI)

We find necessary and sufficient conditions under which an arbitrary metric space $X$ has a unique pretangent space at the marked point $a\\in X$. Key words: Metric spaces; Tangent spaces to metric spaces; Uniqueness of tangent metric spaces; Tangent space to the Cantor set.

Dovgoshey, Oleksiy; Kugukaslan, Mehmet

2009-01-01T23:59:59.000Z

91

Security metrics for source code structures  

Science Conference Proceedings (OSTI)

Software security metrics are measurements to assess security related imperfections (or perfections) introduced during software development. A number of security metrics have been proposed. However, all the perspectives of a software system have not ... Keywords: code quality and security., metrics, security metrics

Istehad Chowdhury; Brian Chan; Mohammad Zulkernine

2008-05-01T23:59:59.000Z

92

Energy Cost Calculator for Commercial Heat Pumps (5.4 >=< 20 Tons) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heat Pumps (5.4 >=< 20 Tons) Heat Pumps (5.4 >=< 20 Tons) Energy Cost Calculator for Commercial Heat Pumps (5.4 >=< 20 Tons) October 8, 2013 - 2:22pm Addthis Vary equipment size, energy cost, hours of operation, and /or efficiency level. INPUT SECTION Input the following data (if any parameter is missing, calculator will set to default value). Defaults Project Type New Installation Replacement New Installation Condenser Type Air Source Water Source Air Source Existing Capacity * ton - Existing Cooling Efficiency * EER - Existing Heating Efficiency * COP - Existing IPLV Efficiency * IPLV - New Capacity ton 10 tons New Cooling Efficiency EER 10.1 EER New Heating Efficiency COP 3.2 COP New IPLV Efficiency IPLV 10.4 IPLV Energy Cost $ per kWh $0.06 per kWh

93

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds The Moab Uranium Mill Tailings Remedial Action Project reached its primary American Recovery and Reinvestment Act milestone ahead of schedule on Wednesday with the disposal of 2 million tons of uranium mill tailings. The project had originally planned to ship 2 million tons of tailings with Recovery Act funds. Now, Recovery Act workers are surpassing that goal. Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds More Documents & Publications EIS-0355: Record of Decision EIS-0355: Draft Environmental Impact Statement EIS-0355: Final Environmental Impact Statement

94

data center energy sustainability metric  

E-Print Network (OSTI)

Data centers represent an increasingly popular construction project type, supported by the continued growth in internet-based services. These facilities can, however, consume large amounts of electricity and—especially if growth trends continue—put strain on utility grids and energy resources. Many metrics have been proposed to evaluate and communicate energy use in data centers. In many cases, the goal is that these metrics will be used to develop energy conscious behavior and perhaps data center sustainability ratings or building codes to reduce average energy use. In this paper, we examine one of the more popular metrics, Power Usage Effectiveness (PUE), and discuss its shortcomings toward effectively communicating energy sustainability. Our inference is that PUE is an instantaneous representation of electrical energy consumption that encourages operators to report the minimum observed values of PUE. Hence, PUE only conveys an understanding of the minimum possible energy use. Instead we propose the use of energy-based metrics or average PUE over a significant time period—e.g., a year—to better understand the energy efficiency of a data center and to develop sustainability rating/ranking systems and energy codes. Keywords-Data centers; energy efficiency metrics; sustainability standards; Power Usage Effectiveness

Jumie Yuventi; Roshan Mehdizadeh; Jumie Yuventi; Roshan Mehdizadeh

2013-01-01T23:59:59.000Z

95

Table 7.1 Coal Overview, 1949-2011 (Million Short Tons)  

U.S. Energy Information Administration (EIA)

Table 7.1 Coal Overview, 1949-2011 (Million Short Tons) Year: Production 1: Waste Coal Supplied 2: Trade: Stock Change 4,5: Losses and

96

Interpreting the C-metric  

E-Print Network (OSTI)

The basic properties of the C-metric are well known. It describes a pair of causally separated black holes which accelerate in opposite directions under the action of forces represented by conical singularities. However, these properties can be demonstrated much more transparently by making use of recently developed coordinate systems for which the metric functions have a simple factor structure. These enable us to obtain explicit Kruskal-Szekeres-type extensions through the horizons and construct two-dimensional conformal Penrose diagrams. We then combine these into a three-dimensional picture which illustrates the global causal structure of the space-time outside the black hole horizons. Using both the weak field limit and some invariant quantities, we give a direct physical interpretation of the parameters which appear in the new form of the metric. For completeness, relations to other familiar coordinate systems are also discussed.

J. B. Griffiths; P. Krtous; J. Podolsky

2006-09-15T23:59:59.000Z

97

Common Carbon Metric | Open Energy Information  

Open Energy Info (EERE)

Common Carbon Metric Common Carbon Metric Jump to: navigation, search Tool Summary Name: Common Carbon Metric Agency/Company /Organization: United Nations Environment Programme, World Resources Institute Sector: Energy Focus Area: Buildings, Energy Efficiency, Industry Topics: GHG inventory, Implementation Resource Type: Guide/manual, Publications Website: www.unep.org/sbci/pdfs/Common-Carbon-Metric-for_Pilot_Testing_220410.p Common Carbon Metric Screenshot References: Common Carbon Metrics [1] "This paper is offered by the United Nations Environment Programme's Sustainable Buildings & Climate Initiative (UNEP-SBCI), a partnership between the UN and public and private stakeholders in the building sector, promoting sustainable building practices globally. The purpose of this

98

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site June 18, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager (970) 257-2145 (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. The shipments mark continued progress toward relocating the 16-million-ton uranium mill tailings pile away from the Colorado River. "The federal budget continues to be stretched thin, and I am proud this

99

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site June 18, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager (970) 257-2145 (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. The shipments mark continued progress toward relocating the 16-million-ton uranium mill tailings pile away from the Colorado River. "The federal budget continues to be stretched thin, and I am proud this

100

Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project Accomplishes Milestone While Doing it Safely Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project Accomplishes Milestone While Doing it Safely February 27, 2012 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director, (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager, (970) 257-2145 Grand Junction, CO- The U.S. Department of Energy (DOE) reached another milestone today for the Uranium Mill Tailings Remedial Action Project, having shipped 5 million tons of tailings from the massive pile located in Moab, Utah, to the engineered disposal cell near Crescent Junction, Utah. The pile comprised an estimated 16 million tons total when DOE's Remedial

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Disposal Facility Reaches 15-Million-Ton Milestone | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Disposal Facility Reaches 15-Million-Ton Milestone Disposal Facility Reaches 15-Million-Ton Milestone Disposal Facility Reaches 15-Million-Ton Milestone July 30, 2013 - 12:00pm Addthis Matt McCormick, manager of the Richland Operations Office, commends a large group of Hanford workers for the 15-million-ton milestone at a public event at the Environmental Restoration Disposal Facility. Matt McCormick, manager of the Richland Operations Office, commends a large group of Hanford workers for the 15-million-ton milestone at a public event at the Environmental Restoration Disposal Facility. RICHLAND, Wash. - EM's Environmental Restoration Disposal Facility (ERDF) - a massive landfill for low-level radioactive and hazardous waste at the Hanford site - has achieved a major cleanup milestone. Since beginning operations in 1996, workers supporting the Richland

102

Billion-Ton Update: Home-Grown Energy Resources Across the Nation |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Billion-Ton Update: Home-Grown Energy Resources Across the Nation Billion-Ton Update: Home-Grown Energy Resources Across the Nation Billion-Ton Update: Home-Grown Energy Resources Across the Nation August 11, 2011 - 3:59pm Addthis Total potential biomass resources by county in the contiguous U.S. from the baseline scenario of the Update (Figure 6.4, page 159) | Map from Billion-Ton Update Total potential biomass resources by county in the contiguous U.S. from the baseline scenario of the Update (Figure 6.4, page 159) | Map from Billion-Ton Update Paul Bryan Biomass Program Manager, Office of Energy Efficiency & Renewable Energy What does this mean for me? With continued developments in biorefinery capacity and technology, the feedstock resources identified in the report could produce about 85 billion gallons of biofuels -- enough to replace approximately 30 percent

103

Self-benchmarking Guide for Cleanrooms: Metrics, Benchmarks, Actions  

E-Print Network (OSTI)

for Cleanrooms: Metrics, Benchmarks, Actions Paul Mathew,efficiency metrics and benchmarks that can be used to trackalso use the metrics and benchmarks described in this guide

Mathew, Paul

2010-01-01T23:59:59.000Z

104

Self-benchmarking Guide for Data Centers: Metrics, Benchmarks, Actions  

E-Print Network (OSTI)

for Data Centers: Metrics, Benchmarks, Actions Paul Mathew,efficiency metrics and benchmarks that can be used to trackalso use the metrics and benchmarks described in this guide

Mathew, Paul

2010-01-01T23:59:59.000Z

105

Appendix B Metric and Thermal Conversion Tables  

U.S. Energy Information Administration (EIA)

2011 U.S. Energy Information Administration | Natural Gas Annual 193 Appendix B Metric and Thermal Conversion Tables

106

Local discriminative distance metrics ensemble learning  

Science Conference Proceedings (OSTI)

The ultimate goal of distance metric learning is to incorporate abundant discriminative information to keep all data samples in the same class close and those from different classes separated. Local distance metric methods can preserve discriminative ... Keywords: Distance metrics learning, Local learning

Yang Mu; Wei Ding; Dacheng Tao

2013-08-01T23:59:59.000Z

107

Energy and momentum in multiple metric theories  

E-Print Network (OSTI)

We derive the expressions for canonical energy, momentum, and angular momentum for multiple metric theories. We prove that although the metric fields are generally interacting, the total energy is the sum of conserved energies corresponding to each metric. A positive energy theorem is given as a result.

Talshir, Idan

2013-01-01T23:59:59.000Z

108

Energy and momentum in multiple metric theories  

E-Print Network (OSTI)

We derive the expressions for canonical energy, momentum, and angular momentum for multiple metric theories. We prove that although the metric fields are generally interacting, the total energy is the sum of conserved energies corresponding to each metric. A positive energy theorem is given as a result.

Talshir, Idan

2012-01-01T23:59:59.000Z

109

Controlled Source Audio MT | Open Energy Information  

Open Energy Info (EERE)

Controlled Source Audio MT Controlled Source Audio MT Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Controlled Source Audio MT Details Activities (5) Areas (5) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Geophysical Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Magnetotelluric Techniques Information Provided by Technique Lithology: Rock composition, mineral and clay content Stratigraphic/Structural: Detection of permeable pathways, fracture zones, faults Hydrological: Resistivity influenced by porosity, grain size distribution, permeability, fluid saturation, fluid type and phase state of the pore water Thermal: Resistivity influenced by temperature Cost Information Low-End Estimate (USD): 1,866.44186,644 centUSD

110

Ground Gravity Survey At Marysville Mt Area (Blackwell) | Open...  

Open Energy Info (EERE)

Ground Gravity Survey At Marysville Mt Area (Blackwell) Exploration Activity Details Location Marysville Mt Area Exploration Technique Ground Gravity Survey Activity Date...

111

Marysville Mt Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Marysville Mt Geothermal Area Marysville Mt Geothermal Area (Redirected from Marysville Mt Area) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Marysville Mt Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (7) 10 References Area Overview Geothermal Area Profile Location: Montana Exploration Region: Other GEA Development Phase: 2008 USGS Resource Estimate Mean Reservoir Temp: Estimated Reservoir Volume: Mean Capacity: Click "Edit With Form" above to add content History and Infrastructure Operating Power Plants: 0 No geothermal plants listed. Add a new Operating Power Plant

112

Rough order of magnitude cost estimate for immobilization of 18.2 MT of plutonium sharing existing facilities at Hanford with pit disassembly {ampersand} conversion facility: alternative 2  

SciTech Connect

The purpose of this Cost Estimate Report is to identify preliminary capital and operating costs for a facility to immobilize 18.2 metric tons (nominal) of plutonium as a ceramic in an existing facility at Hanford, the Fuels and Materials Examination Facility (FMEF). The Pit Disassembly and Conversion Facility (PDCF), which is being costed in a separate report will also be located in the FMEF in this co- location option. The technical engineering data used as the basis for this study is presented in the EIS Data Call Input Report, `Plutonium Immobilization Plant Using Ceramic in Existing Facilities at Hanford.` The FMEF will require minimal facility modifications to accommodate the Plutonium Immobilization Plant (PIP). Adequate space is available within the FMEF for installation of the immobilization process equipment. Facility HVAC, utility, and support systems exist to support the immobilization operations. Building modifications are primarily the removal of the SAF line (gloveboxes and support equipment) on the 70` level and building interior changes. The plutonium immobilization equipment will primarily occupy the 42` and 70` levels of the FMEF, with the same equipment layout as in the sole occupancy case. The Pit Disassembly and Conversion Facility would occupy the 21` and O` (Entry) levels. Elements of the FMEF and adjacent Fuel Assembly Area (FAA) that will be shared by PIP and PDCF include shipping and receiving, laboratory, waste handling, security, offices, maintenance shops, SNM storage vault, and utilities. It was assumed that the existing utilities and support systems are adequate or only need minor upgrades to support both the PIP and PDCF. The PIP cost estimate was reconciled with the PDCF cost estimate to confirm the use and costs of shared systems and personnel. The facility design for a 50 metric ton plutonium throughput plant will be used for the 18.2 metric ton facility. Plutonium conversion operations will operate at the same design rate as the 50 metric ton facility over the 10 year operating period. Some of the process equipment will operate for a shorter period of time and fewer operators will be required. The assumptions, missions, design bases, facility and process descriptions, and accident analyses are the same. Therefore it is assumed that the capital cost for the 18.2 metric ton facility is identical to that of the 50 metric ton facility. However, the following operating costs will be less: consumable materials, equipment replacement and maintenance labor, employment requirements, and waste generation.

DiSabatino, A., LLNL

1998-06-01T23:59:59.000Z

113

Performance Metrics Tiers | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Performance Metrics Tiers Performance Metrics Tiers Performance Metrics Tiers The performance metrics defined by the Commercial Buildings Integration Program offer different tiers of information to address the needs of various users. On this page you will find information about the various goals users are trying to achieve by using performance metrics and the tiers of metrics. Goals in Measuring Performance Many individuals and groups are involved with a building over its lifetime, and all have different interests in and requirements for the building. Although these interests differ, the value in using metrics reflects a small number of driving factors: Controlling energy costs and energy consumption Minimizing environmental impacts Enhancing the image through marketing Improving load forecasting, energy management, and reliability.

114

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Moab Uranium Mill Tailings Remedial Action The Moab Uranium Mill Tailings Remedial Action Project reached its primary American Recovery and Reinvestment Act milestone ahead of schedule on Wednesday with the disposal of 2 million tons of uranium mill tailings. The project had originally planned to ship 2 million tons of tailings with Recovery Act funds. Now, Recovery Act workers are surpass- ing that goal. "Although shipping 2 million tons was the original Recovery Act goal, we are planning to exceed this goal by shipping about 300,000 tons more using savings resulting from efficiencies we've gained in our first 2 years of moving tailings," Moab Federal Project Director Donald Metzler said. The project is using $108 million from the Recovery Act to move the tailings from the banks of the Colorado River by rail to a permanent

115

Moab Marks 6-Million-Ton Cleanup Milestone | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Marks 6-Million-Ton Cleanup Milestone Moab Marks 6-Million-Ton Cleanup Milestone Moab Marks 6-Million-Ton Cleanup Milestone June 20, 2013 - 12:00pm Addthis At Tuesday's Grand County Council meeting in Utah, Moab Federal Project Director Donald Metzler, center, moves a piece from a plaque representing Moab’s uranium mill tailings pile to a plaque representing the disposal cell in recognition of the site achieving a milestone by shipping 6 million tons of the tailings. Grand County Council Chair Gene Ciarus is on the left and Grand County Council Vice Chair Lynn Jackson is on the right. At Tuesday's Grand County Council meeting in Utah, Moab Federal Project Director Donald Metzler, center, moves a piece from a plaque representing Moab's uranium mill tailings pile to a plaque representing the disposal

116

A Concept for a Scalable 2 kTon Liquid Argon TPC Detector for Astroparticle Physics  

E-Print Network (OSTI)

-module configuration and to its large liquid nitrogen consumption (~1 liquid m3 /hour), the 300-ton geometry purity (UHP) liquefied noble gas and for coping with the engineering and safety issues related

McDonald, Kirk

117

DOE-Sponsored Mississippi Project Hits 1-Million-Ton Milestone for Injected  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mississippi Project Hits 1-Million-Ton Milestone for Mississippi Project Hits 1-Million-Ton Milestone for Injected CO2 DOE-Sponsored Mississippi Project Hits 1-Million-Ton Milestone for Injected CO2 November 5, 2009 - 12:00pm Addthis Washington, DC - A large-scale carbon dioxide (CO2) storage project in Mississippi has become the fifth worldwide to reach the important milestone of more than 1 million tons injected. As a result, it is helping to both further carbon capture and storage (CCS) as a mitigation strategy for global climate change and move forward G-8 recommendations for launching 20 projects of this type internationally by 2010. The project, sponsored by the U.S. Department of Energy's (DOE) Office of Fossil Energy (FE), is located at the Cranfield site in Southwestern Mississippi. It is led by the Southeast Regional Carbon Sequestration

118

Metric selection for evaluating human supervisory control of unmanned vehicles  

Science Conference Proceedings (OSTI)

Broad metric classes were proposed in the literature in order to facilitate metric selection for evaluating human-autonomous vehicle interaction. However, there still lacks a systematic method for selecting an efficient set of metrics from the many metrics ... Keywords: AHP, analytic hierarchy process, experiments, human supervisory control, metric quality, metrics

Birsen Donmez; M. L. Cummings

2010-09-01T23:59:59.000Z

119

Cyber Security Metrics and Measures abstract  

Science Conference Proceedings (OSTI)

Paul E. Black, Karen Scarfone, and Murugiah Souppaya, Cyber Security Metrics and Measures, in Wiley Handbook of Science and Technology for ...

2013-05-07T23:59:59.000Z

120

Defining a Standard Metric for Electricity Savings  

E-Print Network (OSTI)

1991. The Potential for Electricity Efficiency Improvementswww.eia.doe.gov/cneaf/electricity/page/eia860.html>. FigureA STANDARD METRIC FOR ELECTRICITY SAVINGS Jonathan Koomey*,

Koomey, Jonathan

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Metric Week Begins 10/10/10!  

Science Conference Proceedings (OSTI)

... Begun by the National Council of Teachers of Mathematics on May 10, 1976, approximately one year after the Metric Conversion Act of 1975 ...

2010-10-07T23:59:59.000Z

122

DEFINING A STANDARD METRIC FOR ELECTRICITY SAVINGS  

NLE Websites -- All DOE Office Websites (Extended Search)

DEFINING A STANDARD METRIC FOR ELECTRICITY SAVINGS Jonathan Koomey*, Hashem Akbari, Carl Blumstein, Marilyn Brown, Richard Brown, Chris Calwell, Sheryl Carter, Ralph Cavanagh,...

123

Argonne TDC: Phase Metrics - Argonne National Laboratory  

A magneto-optical imaging capability developed by Argonne, Phase Metrics, and the Institute of Solid State Physics (Moscow, Russia) could be the key to developing ...

124

Mt Ranier Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Mt Ranier Geothermal Area Mt Ranier Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Mt Ranier Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (2) 10 References Area Overview Geothermal Area Profile Location: Washington Exploration Region: Cascades GEA Development Phase: 2008 USGS Resource Estimate Mean Reservoir Temp: Estimated Reservoir Volume: Mean Capacity: Click "Edit With Form" above to add content History and Infrastructure Operating Power Plants: 0 No geothermal plants listed. Add a new Operating Power Plant Developing Power Projects: 0

125

Mt. Baker Geothermal Project | Open Energy Information  

Open Energy Info (EERE)

Mt. Baker Geothermal Project Mt. Baker Geothermal Project Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Development Project: Mt. Baker Geothermal Project Project Location Information Coordinates 48.777222222222°, -121.81333333333° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.777222222222,"lon":-121.81333333333,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

126

Marysville Mt Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Marysville Mt Geothermal Area Marysville Mt Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Marysville Mt Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (7) 10 References Area Overview Geothermal Area Profile Location: Montana Exploration Region: Other GEA Development Phase: 2008 USGS Resource Estimate Mean Reservoir Temp: Estimated Reservoir Volume: Mean Capacity: Click "Edit With Form" above to add content History and Infrastructure Operating Power Plants: 0 No geothermal plants listed. Add a new Operating Power Plant Developing Power Projects: 0

127

Three-dimensional metrics as deformations of a constant curvature metric  

E-Print Network (OSTI)

Any three-dimensional Riemannian metric can be locally obtained by deforming a constant curvature metric along one direction. The general interest of this result, both in geometry and physics, and related open problems are stressed.

B. Coll; J. Llosa; D. Soler

2001-04-23T23:59:59.000Z

128

Rough order of magnitude cost estimate for immobilization of 50 MT of plutonium sharing existing facilities at Hanford with pit disassembly {ampersand} conversion facility: alternative 11  

SciTech Connect

The purpose of this Cost Estimate Report is to identify preliminary capital and operating costs for a facility to immobilize 50 metric tons (nominal) of plutonium as a ceramic in an existing facility at Hanford, the Fuels and Materials Examination Facility (FMEF). The Pit Disassembly and Conversion Facility (PDCF), which is being costed in a separate report by LANL, will also be located in the FMEF in this co-location option.

DiSabatino, A., LLNL

1998-06-01T23:59:59.000Z

129

NETL: News Release - DOE Regional Partnerships Find Up To 3.5 Billion Tons  

NLE Websites -- All DOE Office Websites (Extended Search)

7, 2007 7, 2007 DOE Regional Partnerships Find More Than 3,500 Billion Tons of Possible CO2 Storage Capacity Atlas Details Stationary Sources and Geologic Reservoirs in U.S. and Canada WASHINGTON, DC - The Department of Energy's Regional Carbon Sequestration Partnerships have identified the powerplant and other stationary sources of more than 3.8 billion tons a year of the greenhouse gas CO2 in the United States and Canada and companion candidate storage capacity for more than 3,500 billion tons. The results are detailed in the new Carbon Sequestration Atlas of the United States and Canada which became available online today. MORE INFO Link to NETL's Carbon Sequestration Atlas web page Link to the Interactive Carbon Sequestration Atlas Learn more about DOE's Regional Carbon Sequestration Partnership program

130

NNSA's Global Threat Reduction Initiative Removes More Than One Ton of  

NLE Websites -- All DOE Office Websites (Extended Search)

Removes More Than One Ton of Removes More Than One Ton of Food | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > NNSA's Global Threat Reduction Initiative Removes More ... NNSA's Global Threat Reduction Initiative Removes More Than One Ton of Food Posted By Office of Public Affairs Contributing to DOE/NNSA's efforts to support the Office of Personnel

131

Information flow metrics analysis in object oriented programming and metrics validation process by RAA algorithm  

Science Conference Proceedings (OSTI)

Transparent data flow metrics and control flow metrics had no main concern which to be handled by a compiler. Nowadays similar hardware and multithreaded coding is increased. Consequently, both data flow and control flow become more important in analyses ... Keywords: Ant colony algorithm, Information flow metrics, Object oriented information flow, Object oriented programming, Rule accuracy algorithm, Rule induction

Abdul Jabbar; Subramani Sarala

2012-12-01T23:59:59.000Z

132

Implementing the data center energy productivity metric  

Science Conference Proceedings (OSTI)

As data centers proliferate in size and number, the endeavor to improve their energy efficiency and productivity is becoming increasingly important. We discuss the properties of a number of the proposed metrics of energy efficiency and productivity. ... Keywords: Energy, data center, metrics, productivity

Landon H. Sego; Andrés Márquez; Andrew Rawson; Tahir Cader; Kevin Fox; William I. Gustafson, Jr.; Christopher J. Mundy

2012-10-01T23:59:59.000Z

133

Modular Robot Motion Planning Using Similarity Metrics  

Science Conference Proceedings (OSTI)

In order for a modular self-reconfigurable robotic system to autonomously change from its current state to a desired one, it is critical to have a cost function (or metric) that reflects the effort required to reconfigure. A reconfiguration sequence ... Keywords: group, metric, modular robots, morphing, optimal assignment, pattern matching

Chih-Jung Chiang; Gregory S. Chirikjian

2001-01-01T23:59:59.000Z

134

The Arabidopsis TRM1TON1 Interaction Reveals a Recruitment Network Common to Plant Cortical  

E-Print Network (OSTI)

microtubules via its C-terminal TON1 interaction motif. Interestingly, three motifs of TRMs are found in CAP350, a human centrosomal protein interacting with FOP, and the C-terminal M2 motif of CAP350 is responsible., 2006). CAP350 has also been proposed to specifically stabilize Golgi-associated microtubules

Paris-Sud XI, Université de

135

Photo of the Week: An Incredible Journey -- Transporting a 50-ton Magnet |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

An Incredible Journey -- Transporting a 50-ton An Incredible Journey -- Transporting a 50-ton Magnet Photo of the Week: An Incredible Journey -- Transporting a 50-ton Magnet July 11, 2013 - 4:38pm Addthis The Muon g-2 (pronounced gee minus two) is an experiment that will use the Fermilab accelerator complex to create an intense beam of muons -- a type of subatomic particle -- traveling at the speed of light. The experiment is picking up after a previous muon experiment at Brookhaven National Laboratory, which concluded in 2001. In this photo, the massive electromagnet is beginning its 3,200-mile journey from the woods of Long Island to the plains near Chicago, where scientists at Fermilab will refill its storage ring with muons created at Fermilab’s Antiproton Source. The 50-foot-diameter ring is made of steel, aluminum and superconducting wire. It will travel down the East Coast, around the tip of Florida, and up the Mississippi River to Fermilab in Illinois. Transporting the 50-ton device by truck requires meticulous precision -- just a tilt or a twist of a few degrees could leave the internal wiring irreparably damaged.

136

2 million tons per year: A performing biofuels supply chain for  

E-Print Network (OSTI)

1 2 million tons per year: A performing biofuels supply chain for EU aviation NOTE It is understood that in the context of this text the term "biofuel(s) use in aviation" categorically implies "sustainably produced biofuel(s)" according to the EU legislation. June 2011 #12;2 This technical paper was drafted

137

SAPHIRE 8 Quality Assurance Software Metrics Report  

SciTech Connect

The purpose of this review of software metrics is to examine the quality of the metrics gathered in the 2010 IV&V and to set an outline for results of updated metrics runs to be performed. We find from the review that the maintenance of accepted quality standards presented in the SAPHIRE 8 initial Independent Verification and Validation (IV&V) of April, 2010 is most easily achieved by continuing to utilize the tools used in that effort while adding a metric of bug tracking and resolution. Recommendations from the final IV&V were to continue periodic measurable metrics such as McCabe's complexity measure to ensure quality is maintained. The four software tools used to measure quality in the IV&V were CodeHealer, Coverage Validator, Memory Validator, Performance Validator, and Thread Validator. These are evaluated based on their capabilities. We attempted to run their latest revisions with the newer Delphi 2010 based SAPHIRE 8 code that has been developed and was successful with all of the Validator series of tools on small tests. Another recommendation from the IV&V was to incorporate a bug tracking and resolution metric. To improve our capability of producing this metric, we integrated our current web reporting system with the SpiraTest test management software purchased earlier this year to track requirements traceability.

Kurt G. Vedros

2011-08-01T23:59:59.000Z

138

Energy-Momentum Distribution in Weyl Metrics  

E-Print Network (OSTI)

In this paper, we evaluate energy and momentum density distributions for the Weyl metric by using the well-known prescriptions of Einstein, Landau-Lifshitz, Papaterou and M$\\ddot{o}$ller. The metric under consideration is the static axisymmetric vacuum solution to the Einstein field equations and one of the field equations represents the Laplace equation. Curzon metric is the special case of this spacetime. We find that the energy density is different for each prescription. However, momentum turns out to be constant in each case.

M. Sharif; Tasnim Fatima

2005-07-16T23:59:59.000Z

139

Data Collection and Reporting for Metrics and Benefits: Smart...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Reporting for Metrics and Benefits: Smart Grid Investment Grant Program Data Collection and Reporting for Metrics and Benefits: Smart Grid Investment Grant Program Presentation...

140

Self-benchmarking Guide for Cleanrooms: Metrics, Benchmarks,...  

NLE Websites -- All DOE Office Websites (Extended Search)

Cleanrooms: Metrics, Benchmarks, Actions Title Self-benchmarking Guide for Cleanrooms: Metrics, Benchmarks, Actions Publication Type Report LBNL Report Number LBNL-3392E Year of...

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Self-benchmarking Guide for Data Centers: Metrics, Benchmarks...  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Centers: Metrics, Benchmarks, Actions Title Self-benchmarking Guide for Data Centers: Metrics, Benchmarks, Actions Publication Type Report LBNL Report Number LBNL-3393E Year...

142

Self-benchmarking Guide for Laboratory Buildings: Metrics, Benchmarks...  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory Buildings: Metrics, Benchmarks, Actions Title Self-benchmarking Guide for Laboratory Buildings: Metrics, Benchmarks, Actions Publication Type Report LBNL Report Number...

143

Metrics and Benchmarks for Energy Efficiency in Laboratories  

E-Print Network (OSTI)

Report 4-10-08 Metrics and Benchmarks for Energy Efficiencybenchmarking database. The benchmarks for standard, good andefficiency metrics and benchmarks for laboratories, which

Mathew, Paul; Rumsey Engineers

2008-01-01T23:59:59.000Z

144

U.S. Billion-Ton Update: Biomass Supply for a Bioenergy and Bioproducts Industry  

SciTech Connect

The report, Biomass as Feedstock for a Bioenergy and Bioproducts Industry: The Technical Feasibility of a Billion-Ton Annual Supply (generally referred to as the Billion-Ton Study or 2005 BTS), was an estimate of 'potential' biomass based on numerous assumptions about current and future inventory, production capacity, availability, and technology. The analysis was made to determine if conterminous U.S. agriculture and forestry resources had the capability to produce at least one billion dry tons of sustainable biomass annually to displace 30% or more of the nation's present petroleum consumption. An effort was made to use conservative estimates to assure confidence in having sufficient supply to reach the goal. The potential biomass was projected to be reasonably available around mid-century when large-scale biorefineries are likely to exist. The study emphasized primary sources of forest- and agriculture-derived biomass, such as logging residues, fuel treatment thinnings, crop residues, and perennially grown grasses and trees. These primary sources have the greatest potential to supply large, reliable, and sustainable quantities of biomass. While the primary sources were emphasized, estimates of secondary residue and tertiary waste resources of biomass were also provided. The original Billion-Ton Resource Assessment, published in 2005, was divided into two parts-forest-derived resources and agriculture-derived resources. The forest resources included residues produced during the harvesting of merchantable timber, forest residues, and small-diameter trees that could become available through initiatives to reduce fire hazards and improve forest health; forest residues from land conversion; fuelwood extracted from forests; residues generated at primary forest product processing mills; and urban wood wastes, municipal solid wastes (MSW), and construction and demolition (C&D) debris. For these forest resources, only residues, wastes, and small-diameter trees were considered. The 2005 BTS did not attempt to include any wood that would normally be used for higher-valued products (e.g., pulpwood) that could potentially shift to bioenergy applications. This would have required a separate economic analysis, which was not part of the 2005 BTS. The agriculture resources in the 2005 BTS included grains used for biofuels production; crop residues derived primarily from corn, wheat, and small grains; and animal manures and other residues. The cropland resource analysis also included estimates of perennial energy crops (e.g., herbaceous grasses, such as switchgrass, woody crops like hybrid poplar, as well as willow grown under short rotations and more intensive management than conventional plantation forests). Woody crops were included under cropland resources because it was assumed that they would be grown on a combination of cropland and pasture rather than forestland. In the 2005 BTS, current resource availability was estimated at 278 million dry tons annually from forestlands and slightly more than 194 million dry tons annually from croplands. These annual quantities increase to about 370 million dry tons from forestlands and to nearly 1 billion dry tons from croplands under scenario conditions of high-yield growth and large-scale plantings of perennial grasses and woody tree crops. This high-yield scenario reflects a mid-century timescale ({approx}2040-2050). Under conditions of lower-yield growth, estimated resource potential was projected to be about 320 and 580 million dry tons for forest and cropland biomass, respectively. As noted earlier, the 2005 BTS emphasized the primary resources (agricultural and forestry residues and energy crops) because they represent nearly 80% of the long-term resource potential. Since publication of the BTS in April 2005, there have been some rather dramatic changes in energy markets. In fact, just prior to the actual publication of the BTS, world oil prices started to increase as a result of a burgeoning worldwide demand and concerns about long-term supplies. By the end of the summer, oil pri

Downing, Mark [ORNL; Eaton, Laurence M [ORNL; Graham, Robin Lambert [ORNL; Langholtz, Matthew H [ORNL; Perlack, Robert D [ORNL; Turhollow Jr, Anthony F [ORNL; Stokes, Bryce [Navarro Research & Engineering; Brandt, Craig C [ORNL

2011-08-01T23:59:59.000Z

145

Mt Peak Utility | Open Energy Information  

Open Energy Info (EERE)

Peak Utility Peak Utility Jump to: navigation, search Name Mt Peak Utility Facility Mt Peak Utility Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner Mnt Peak Utility Energy Purchaser Mnt Peak Utility Location Midlothian TX Coordinates 32.42144978°, -97.02427357° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.42144978,"lon":-97.02427357,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

146

Mt Poso Cogeneration | Open Energy Information  

Open Energy Info (EERE)

Poso Cogeneration Poso Cogeneration Jump to: navigation, search Name Mt Poso Cogeneration Place Bakersfield, California Zip 93308 Product California-based project developer for the Mt Poso Cogeneration project near Bakersfield, California. Coordinates 44.78267°, -72.801369° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.78267,"lon":-72.801369,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

147

Microsoft Word - MtRichmond_CX  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 REPLY TO ATTN OF: KEC-4 SUBJECT: Environmental Clearance Memorandum Dorie Welch Project Manager - KEWM-4 Proposed Action: Mt. Richmond property funding Fish and Wildlife Project No.: 2011-003-00, BPA-007071 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.25 Real Property transfers for cultural protection, habitat preservation, and wildlife management. Location: Fairdale and Yamhill quadrangles, in Yamhill County, Oregon (near Yamhill, Oregon). Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA is proposing to fund the Yamhill Soil and Water Conservation District's (YSWCD) purchase of the Mt. Richmond property (Property), a 284.66-acre parcel of land located west of the City of Yamhill in Yamhill County Oregon.

148

Spatial Error Metrics for Oceanographic Model Verification  

Science Conference Proceedings (OSTI)

A common problem with modern numerical oceanographic models is spatial displacement, including misplacement and misshapenness of ocean circulation features. Traditional error metrics, such as least squares methods, are ineffective in many such ...

Sean B. Ziegeler; James D. Dykes; Jay F. Shriver

2012-02-01T23:59:59.000Z

149

Harmonizing Global Metrics for Data Center Efficiency  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 Page 1 Harmonizing Global Metrics for Data Center Energy Efficiency Global Taskforce Reaches Agreement on Measurement Protocols for PUE - Continues Discussion of Additional Energy Efficiency Metrics February 28th, 2011 The data center has become an increasingly important part of most business operations in the twenty-first century. With escalating demand and rising energy prices, it is essential for the owners and operators of these mission critical facilities to assess and improve their performance with energy efficiency metrics. However, even with the global presence of many companies, these metrics are often not applied consistently at a global level. To address these inconsistencies, a group of global leaders has been meeting regularly to agree

150

Metrics of Risk Associated with Defects Rediscovery  

E-Print Network (OSTI)

Software defects rediscovered by a large number of customers affect various stakeholders and may: 1) hint at gaps in a software manufacturer's Quality Assurance (QA) processes, 2) lead to an over-load of a software manufacturer's support and maintenance teams, and 3) consume customers' resources, leading to a loss of reputation and a decrease in sales. Quantifying risk associated with the rediscovery of defects can help all of these stake-holders. In this chapter we present a set of metrics needed to quantify the risks. The metrics are designed to help: 1) the QA team to assess their processes; 2) the support and maintenance teams to allocate their resources; and 3) the customers to assess the risk associated with using the software product. The paper includes a validation case study which applies the risk metrics to industrial data. To calculate the metrics we use mathematical instruments like the heavy-tailed Kappa distribution and the G/M/k queuing model.

Miranskyy, Andriy V; Reesor, Mark

2011-01-01T23:59:59.000Z

151

Does General Relativity Require a Metric  

E-Print Network (OSTI)

The nexus between the gravitational field and the space-time metric was an essential element in Einstein's development of General Relativity and led him to his discovery of the field equations for the gravitational field/metric. I will argue here that the metric is in fact an inessential element of this theory and can be dispensed with entirely. Its sole function in the theory was to describe the space-time measurements made by ideal clocks and rods. However, the behavior of model clocks and measuring rods can be derived directly from the field equations of General Relativity using the Einstein-Infeld-Hoffmann (EIH) approiximation procedure. Therefore one does not need to introduce these ideal clocks and rods and hence has no need of a metric.

James L. Anderson

1999-12-13T23:59:59.000Z

152

Clean Cities Annual Metrics Report 2009 (Revised)  

SciTech Connect

Document provides Clean Cities coalition metrics about the use of alternative fuels; the deployment of alternative fuel vehicles, hybrid electric vehicles (HEVs), and idle reduction initiatives; fuel economy activities; and programs to reduce vehicle miles driven.

Johnson, C.

2011-08-01T23:59:59.000Z

153

Data Acquisition-Manipulation At Marysville Mt Area (Blackwell) | Open  

Open Energy Info (EERE)

Marysville Mt Area (Blackwell) Marysville Mt Area (Blackwell) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Data Acquisition-Manipulation At Marysville Mt Area (Blackwell) Exploration Activity Details Location Marysville Mt Area Exploration Technique Data Acquisition-Manipulation Activity Date Usefulness useful DOE-funding Unknown Notes Heat flow analysis. References D. D. Blackwell (Unknown) Exploration In A Blind Geothermal Area Near Marysville, Montana, Usa Retrieved from "http://en.openei.org/w/index.php?title=Data_Acquisition-Manipulation_At_Marysville_Mt_Area_(Blackwell)&oldid=388982" Category: Exploration Activities What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs

154

Evidential structures and metrics for network forensics  

Science Conference Proceedings (OSTI)

Evaluation of forensics evidence is an essential step in proving the malicious intents of an attacker or adversary and the severity of the damages caused to any network. This paper takes a step forward showing how security metrics can be used to sustain ... Keywords: CVSS, NFR, common vulnerability scoring system, evidential database, evidential structure, network attacks, network evidence, network forensic readiness, network forensics, security metrics

Ahmad R. Amran; Raphael C-W. Phan; David J. Parish; John N. Whitley

2010-12-01T23:59:59.000Z

155

NETL: News Release - DOE-Sponsored Mississippi Project Hits 1-Million-Ton  

NLE Websites -- All DOE Office Websites (Extended Search)

5, 2009 5, 2009 DOE-Sponsored Mississippi Project Hits 1-Million-Ton Milestone for Injected CO2 Project Helping Further CCS Technology and Meeting G-8 Goals for Deployment Washington, D.C. -A large-scale carbon dioxide (CO2) storage project in Mississippi has become the fifth worldwide to reach the important milestone of more than 1 million tons injected. As a result, it is helping to both further carbon capture and storage (CCS) as a mitigation strategy for global climate change and move forward G-8 recommendations for launching 20 projects of this type internationally by 2010. MORE INFO Learn more about DOE's Regional Carbon Sequestration Partnership Program Link to SECARB web site The project, sponsored by the U.S. Department of Energy's (DOE) Office of Fossil Energy (FE), is located at the Cranfield site in Southwestern

156

U.S. Manufacturers Save $1 Billion, 11 Million Tons of CO2 through Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » U.S. Manufacturers Save $1 Billion, 11 Million Tons of CO2 through Energy Efficiency Investments U.S. Manufacturers Save $1 Billion, 11 Million Tons of CO2 through Energy Efficiency Investments September 25, 2013 - 12:00pm Addthis News Media Contact (202) 586-4940 WASHINGTON - Underscoring the Obama Administration's efforts to double energy productivity by 2030 and help businesses save money and energy, the Energy Department today recognized more than 120 manufacturers that are making smart investments to save on energy costs, cut greenhouse gas emissions and improve their bottom lines. Through the Department's Better Buildings, Better Plants Program (Better Plants), over 1,750 plants across the United States have saved about $1 billion in energy costs and

157

Cleanup of 77 Waste Sites Meets Two TPA Milestones: 1.2 million tons of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cleanup of 77 Waste Sites Meets Two TPA Milestones: 1.2 million Cleanup of 77 Waste Sites Meets Two TPA Milestones: 1.2 million tons of soil and debris disposed of from D, H Reactor Areas Cleanup of 77 Waste Sites Meets Two TPA Milestones: 1.2 million tons of soil and debris disposed of from D, H Reactor Areas January 11, 2012 - 12:00pm Addthis Media Contacts Cameron Hardy, DOE (509) 376-5365, Cameron.Hardy@rl.doe.gov Dieter Bohrmann, Ecology (509) 372-7954, Dieter.Bohrmann@ecy.wa.gov Emerald Laija, EPA (509) 376-4919, Laija.Emerald@epamail.epa.gov RICHLAND, WASH. - Department of Energy (DOE) contractor, Washington Closure Hanford, recently cleaned up 77 waste sites at Hanford to meet two Tri-Party Agreement (TPA) milestones before the end of 2011. The waste sites were located in the D and H Reactor Areas at Hanford along

158

Great Plains Coal Gasification Project will make 17. 5 tons/day of methanol  

SciTech Connect

The Great Plains Coal Gasification Project will make 17.5 tons/day of methanol in addition to 125 million cu ft/day of pipeline-quality substitute natural gas (SNG), making the facility the first commercial producer of methanol-from-coal in the United States, according to the consortium building the $1.5 billion facility in Beulah, North Dakota. As originally conceived, the plant would have used 17 tons/day of purchased methanol to clean the raw-gas product stream of impurities, primarily sulfur. But based on the cost of transporting methanol to the plant site and storing it for use, the consortium decided it was more economical to produce its own methanol from lignite. The construction started in July 1980, and the facility is to come on stream in 1984.

Not Available

1980-11-17T23:59:59.000Z

159

Metrics for Evaluating the Accuracy of Solar Power Forecasting (Presentation)  

DOE Green Energy (OSTI)

This presentation proposes a suite of metrics for evaluating the performance of solar power forecasting.

Zhang, J.; Hodge, B.; Florita, A.; Lu, S.; Hamann, H.; Banunarayanan, V.

2013-10-01T23:59:59.000Z

160

Annex A Metrics for the Smart Grid System Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Annex A Annex A Metrics for the Smart Grid System Report A.iii Table of Contents Introduction ........................................................................................................................................... A.1 Metric #1: The Fraction of Customers and Total Load Served by Real-Time Pricing, Critical Peak Pricing, and Time-of-Use Pricing ........................................................................................ A.2 Metric #2: Real-Time System Operations Data Sharing ...................................................................... A.9 Metric #3: Standard Distributed Resource Connection Policies .......................................................... A.18 Metric #4: Regulatory Recovery for Smart Grid Investments ............................................................. A.23

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Cleanroom Energy Efficiency: Metrics and Benchmarks  

Science Conference Proceedings (OSTI)

Cleanrooms are among the most energy-intensive types of facilities. This is primarily due to the cleanliness requirements that result in high airflow rates and system static pressures, as well as process requirements that result in high cooling loads. Various studies have shown that there is a wide range of cleanroom energy efficiencies and that facility managers may not be aware of how energy efficient their cleanroom facility can be relative to other cleanroom facilities with the same cleanliness requirements. Metrics and benchmarks are an effective way to compare one facility to another and to track the performance of a given facility over time. This article presents the key metrics and benchmarks that facility managers can use to assess, track, and manage their cleanroom energy efficiency or to set energy efficiency targets for new construction. These include system-level metrics such as air change rates, air handling W/cfm, and filter pressure drops. Operational data are presented from over 20 different cleanrooms that were benchmarked with these metrics and that are part of the cleanroom benchmark dataset maintained by Lawrence Berkeley National Laboratory (LBNL). Overall production efficiency metrics for cleanrooms in 28 semiconductor manufacturing facilities in the United States and recorded in the Fabs21 database are also presented.

International SEMATECH Manufacturing Initiative; Mathew, Paul A.; Tschudi, William; Sartor, Dale; Beasley, James

2010-07-07T23:59:59.000Z

162

Implementing the Data Center Energy Productivity Metric  

SciTech Connect

As data centers proliferate in both size and number, their energy efficiency is becoming increasingly important. We discuss the properties of a number of the proposed metrics of energy efficiency and productivity. In particular, we focus on the Data Center Energy Productivity (DCeP) metric, which is the ratio of useful work produced by the data center to the energy consumed performing that work. We describe our approach for using DCeP as the principal outcome of a designed experiment using a highly instrumented, high performance computing data center. We found that DCeP was successful in clearly distinguishing between different operational states in the data center, thereby validating its utility as a metric for identifying configurations of hardware and software that would improve (or even maximize) energy productivity. We also discuss some of the challenges and benefits associated with implementing the DCeP metric, and we examine the efficacy of the metric in making comparisons within a data center and among data centers.

Sego, Landon H.; Marquez, Andres; Rawson, Andrew; Cader, Tahir; Fox, Kevin M.; Gustafson, William I.; Mundy, Christopher J.

2012-10-01T23:59:59.000Z

163

Normand Mousseau Dpartement de physique,  

E-Print Network (OSTI)

1992 2001 2010 Productionannuelle(Mtép) Année #12;Figure 3 Production of oil shale in million metric tons from selected oil shale deposits from 1880 to 2000 (Dyni, 2003) US Geological Survey, 2002

Skorobogatiy, Maksim

164

Discussion for Metrics and Benefits Data Collection  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Metrics and Benefits Analysis for Metrics and Benefits Analysis for the ARRA Smart Grid Programs Joe Paladino Office of Electricity Delivery and Energy Reliability U.S. Department of Energy OE Electricity Advisory Committee Meeting March 10, 2011 140 ARRA-Funded Smart Grid Projects 1 Customer Systems Customer Systems Customer Systems Customer Systems SGIG/SGDP/RDSI Areas of Smart Grid Technology Deployment Customer Systems Advance Metering Infrastructure Electric Distribution Systems Electric Transmission Systems * Displays * Portals * Energy management * Direct load controls * Smart meters * Data management * Back office integration * Switches * Feeder optimization * Equipment monitoring * Energy Storage * Wide area monitoring and visualization * Synchrophasor Technology * Energy Storage Customer Systems Equipment Manufacturing

165

Projective Space Codes for the Injection Metric  

E-Print Network (OSTI)

In the context of error control in random linear network coding, it is useful to construct codes that comprise well-separated collections of subspaces of a vector space over a finite field. In this paper, the metric used is the so-called "injection distance", introduced by Silva and Kschischang. A Gilbert-Varshamov bound for such codes is derived. Using the code-construction framework of Etzion and Silberstein, new non-constant-dimension codes are constructed; these codes contain more codewords than comparable codes designed for the subspace metric.

Khaleghi, Azadeh

2009-01-01T23:59:59.000Z

166

Powder River Basin (WY, MT) Coal and Coalbed Methane: Evaluating...  

Open Energy Info (EERE)

Powder River Basin (WY, MT) Coal and Coalbed Methane: Evaluating and Revising 100 Years of Studies The USGS published a USGS Professional Paper in 2010 entitled 

167

Powder River Basin (WY, MT) Coal and Coalbed Methane: Evaluating...  

Open Energy Info (EERE)

Search Share this page on Facebook icon Twitter icon Powder River Basin (WY, MT) Coal and Coalbed Methane: Evaluating and Revising 100 Years of Studies Dataset Summary...

168

Integrated dense array and transect MT surveying at dixie valley...  

Open Energy Info (EERE)

2007 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Integrated dense array and transect MT surveying at dixie valley geothermal...

169

,"Whitlash, MT Natural Gas Pipeline Imports From Canada (MMcf...  

U.S. Energy Information Administration (EIA) Indexed Site

Whitlash, MT Natural Gas Pipeline Imports From Canada (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest...

170

,"Havre, MT Natural Gas Pipeline Imports From Canada (MMcf)"  

U.S. Energy Information Administration (EIA) Indexed Site

Of Series","Frequency","Latest Data for" ,"Data 1","Havre, MT Natural Gas Pipeline Imports From Canada (MMcf)",1,"Annual",2003 ,"Release Date:","172014" ,"Next...

171

,"Babb, MT Natural Gas Pipeline Imports From Canada (MMcf)"  

U.S. Energy Information Administration (EIA) Indexed Site

Of Series","Frequency","Latest Data for" ,"Data 1","Babb, MT Natural Gas Pipeline Imports From Canada (MMcf)",1,"Annual",2012 ,"Release Date:","172014" ,"Next...

172

,"Sweetgrass, MT Natural Gas Pipeline Imports From Canada (MMcf...  

U.S. Energy Information Administration (EIA) Indexed Site

Sweetgrass, MT Natural Gas Pipeline Imports From Canada (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest...

173

Controlled Source Audio MT At Roosevelt Hot Springs Area (Combs...  

Open Energy Info (EERE)

Activity Date Usefulness not indicated DOE-funding Unknown Notes "SP, MT, dipole-dipole resistivity, CSAMT; sufficient electrical data may be available" References Jim Combs (1...

174

Performance Metrics Research Project - Final Report  

SciTech Connect

NREL began work for DOE on this project to standardize the measurement and characterization of building energy performance. NREL's primary research objectives were to determine which performance metrics have greatest value for determining energy performance and to develop standard definitions and methods of measuring and reporting that performance.

Deru, M.; Torcellini, P.

2005-10-01T23:59:59.000Z

175

Cohesion and coupling metrics for ontology modules  

Science Conference Proceedings (OSTI)

In recent years, an increasing number of ontologies and semantic web applications have been developed and used. A conscious effort has been made to develop methods to modularize ontologies. These methods contribute to building a new ontology. However, ... Keywords: Cohesion, Coupling, Metrics, Modularity, Ontology

Sunju Oh; Heon Y. Yeom; Joongho Ahn

2011-06-01T23:59:59.000Z

176

Clean Cities 2011 Annual Metrics Report  

DOE Green Energy (OSTI)

This report details the petroleum savings and vehicle emissions reductions achieved by the U.S. Department of Energy's Clean Cities program in 2011. The report also details other performance metrics, including the number of stakeholders in Clean Cities coalitions, outreach activities by coalitions and national laboratories, and alternative fuel vehicles deployed.

Johnson, C.

2012-12-01T23:59:59.000Z

177

Clean Cities 2010 Annual Metrics Report  

DOE Green Energy (OSTI)

This report details the petroleum savings and vehicle emissions reductions achieved by the U.S. Department of Energy's Clean Cities program in 2010. The report also details other performance metrics, including the number of stakeholders in Clean Cities coalitions, outreach activities by coalitions and national laboratories, and alternative fuel vehicles deployed.

Johnson, C.

2012-10-01T23:59:59.000Z

178

APC: a performance metric of memory systems  

Science Conference Proceedings (OSTI)

Due to the infamous "memory wall" problem and a drastic increase in the number of data intensive applications, memory rather than processor has become the leading performance bottleneck of modern computing systems. Evaluating and understanding memory ... Keywords: measurement methodology, memory metric, memory performance measurement

Xian-He Sun; Dawei Wang

2012-10-01T23:59:59.000Z

179

LANNDD -A line of liquid argon TPC detectors scalable in mass from 200 Tons to 100 KTons  

E-Print Network (OSTI)

and to its large liquid nitrogen consumption (~1 liquid m3/hour), the 300-ton geometry and construction required for a detector based on an ultra high purity (UHP) liquefied noble gas and for coping

McDonald, Kirk

180

Mt Signal Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Signal Geothermal Area Signal Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Mt Signal Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (0) 10 References Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"TERRAIN","zoom":6,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"500px","height":"300px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.65,"lon":-115.71,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

WPA Omnibus Award MT Wind Power Outreach  

DOE Green Energy (OSTI)

The objective of this grant was to further the development of Montanaâ??s vast wind resources for small, medium, and large scale benefits to Montana and the nation. This was accomplished through collaborative work with wind industry representatives, state and local governments, the agricultural community, and interested citizens. Through these efforts MT Dept Environmental Quality (DEQ) was able to identify development barriers, educate and inform citizens, as well as to participate in regional and national dialogue that will spur the development of wind resources. The scope of DEQâ??s wind outreach effort evolved over the course of this agreement from the development of the Montana Wind Working Group and traditional outreach efforts, to the current focus on working with the stateâ??s university system to deliver a workforce trained to enter the wind industry.

Brian Spangler, Manager Energy Planning and Renewables

2012-01-30T23:59:59.000Z

182

Data Update for Mt. Tom, Holyoke, MA September 2005  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA September 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for September 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

183

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA March 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for March 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

184

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA June 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for June 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

185

Data Update for Mt. Tom, Holyoke, MA February 2006  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA February 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for February 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

186

Data Update for Mt. Tom, Holyoke, MA January 2007  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA January 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for January 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

187

Data Update for Mt. Tom, Holyoke, MA October 2005  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA October 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for October 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

188

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA June 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for June 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

189

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA March 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for March 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

190

Data Update for Mt. Tom, Holyoke, MA January 2006  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA January 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for December 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

191

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA April 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for April 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

192

Data Update for Mt. Tom, Holyoke, MA January 2008  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA January 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for January 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

193

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA March 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for March 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59.2" N, 72

Massachusetts at Amherst, University of

194

Data Update for Mt. Tom, Holyoke, MA September 2007  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA September 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for September 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

195

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA July 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for July 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59.2" N, 72

Massachusetts at Amherst, University of

196

Data Update for Mt. Tom, Holyoke, MA August 2006  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA August 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for August 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

197

Data Update for Mt. Tom, Holyoke, MA November 2007  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA November 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for November 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

198

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA April 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for April 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59.2" N, 72

Massachusetts at Amherst, University of

199

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA July 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for July 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

200

Data Update for Mt. Tom, Holyoke, MA November 2005  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA November 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for November 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA April 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for April 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

202

Data Update for Mt. Tom, Holyoke, MA September 2006  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA September 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for September 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

203

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA May 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for May 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

204

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA July 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for July 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

205

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA May 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for May 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59.2" N, 72

Massachusetts at Amherst, University of

206

Data Update for Mt. Tom, Holyoke, MA Prepared for  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA June 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for June 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59.2" N, 72

Massachusetts at Amherst, University of

207

Data Update for Mt. Tom, Holyoke, MA October 2007  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA October 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for October 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

208

Data Update for Mt. Tom, Holyoke, MA February 2008  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA February 2008 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for February 2008 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

209

Data Update for Mt. Tom, Holyoke, MA August 2007  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA August 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for August 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

210

Data Update for Mt. Tom, Holyoke, MA November 2006  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA November 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for November 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

211

Data Update for Mt. Tom, Holyoke, MA October 2006  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA October 2006 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Elkinton Monthly Data Summary for October 2006 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

212

Data Update for Mt. Tom, Holyoke, MA February 2007  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA February 2007 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Puneet Malhotra Monthly Data Summary for February 2007 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

213

Data Update for Mt. Tom, Holyoke, MA December 2005  

E-Print Network (OSTI)

Data Update for Mt. Tom, Holyoke, MA December 2005 Prepared for Massachusetts Technology Collaborative 75 North Drive, Westborough, MA 01581 By Melissa Ray Monthly Data Summary for December 2005 This update summarizes the monthly data results for the Mt. Tom monitoring site in Holyoke, MA, at 42° 14' 59

Massachusetts at Amherst, University of

214

Ground Magnetics At Marysville Mt Area (Blackwell) | Open Energy  

Open Energy Info (EERE)

Ground Magnetics At Marysville Mt Area (Blackwell) Ground Magnetics At Marysville Mt Area (Blackwell) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Magnetics At Marysville Mt Area (Blackwell) Exploration Activity Details Location Marysville Mt Area Exploration Technique Ground Magnetics Activity Date Usefulness not useful DOE-funding Unknown Notes A ground magnetic survey located no anomaly with an amplitude of more than 20 or 30 gammas that could be associated with the thermal anomaly, however the magnetic data did outline the Cretaceous stock in great detail and allow the removal from the gravity field of the effect of the stock. References D. D. Blackwell (Unknown) Exploration In A Blind Geothermal Area Near Marysville, Montana, Usa Retrieved from "http://en.openei.org/w/index.php?title=Ground_Magnetics_At_Marysville_Mt_Area_(Blackwell)&oldid=389390"

215

Metrics and Benchmarks for Energy Efficiency in Laboratories  

E-Print Network (OSTI)

2004 pro- vide an additional benchmark. F O R T H E Table 3.Performance Metrics & Benchmarks Notes A performance MetricBTU/sf-yr). A performance Benchmark is a particular value of

Mathew, Paul

2007-01-01T23:59:59.000Z

216

New Categorical Metrics for Air Quality Model Evaluation  

Science Conference Proceedings (OSTI)

Traditional categorical metrics used in model evaluations are “clear cut” measures in that the model’s ability to predict an “exceedance” is defined by a fixed threshold concentration and the metrics are defined by observation–forecast sets that ...

Daiwen Kang; Rohit Mathur; Kenneth Schere; Shaocai Yu; Brian Eder

2007-04-01T23:59:59.000Z

217

Metrics: How to Improve Key Business Results, 1st edition  

Science Conference Proceedings (OSTI)

Metrics are a hot topic. Executive leadership, boards of directors, management, and customers are all asking for data-based decisions. As a result, many managers, professionals, and change agents are asked to develop metrics, but have no clear idea ...

Martin Klubeck

2011-12-01T23:59:59.000Z

218

Performance Metrics for Soil Moisture Retrievals and Application Requirements  

Science Conference Proceedings (OSTI)

Quadratic performance metrics such as root-mean-square error (RMSE) and time series correlation are often used to assess the accuracy of geophysical retrievals (satellite measurements) with respect to true fields. These metrics are related; ...

Dara Entekhabi; Rolf H. Reichle; Randal D. Koster; Wade T. Crow

2010-06-01T23:59:59.000Z

219

Numerical Consistency of Metric Terms in Terrain-Following Coordinates  

Science Conference Proceedings (OSTI)

In numerically integrating the equations of motion in terrain-following coordinates, care must be taken in treating the metric terms that arise due to the sloping coordinate surfaces. In particular, metric terms that appear in the advection and ...

Joseph B. Klemp; William C. Skamarock; Oliver Fuhrer

2003-07-01T23:59:59.000Z

220

Metrics and Benchmarks for Energy Efficiency in Laboratories  

E-Print Network (OSTI)

Rated Efficiency Meet ASHRAE 90.1 NPLV kW/ton Cooling TowerEfficiency Cooling Tower Approach Chilled Water Pumping

Mathew, Paul

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

On the history of fourth order metric theories of gravitation  

E-Print Network (OSTI)

We present the history of fourth order metric theories of gravitation from its beginning in 1918 until 1988.

R. Schimming; H. -J. Schmidt

2004-12-08T23:59:59.000Z

222

Financial Metrics Data Collection Protocol, Version 1.0  

SciTech Connect

Brief description of data collection process and plan that will be used to collect financial metrics associated with sustainable design.

Fowler, Kimberly M.; Gorrissen, Willy J.; Wang, Na

2010-04-30T23:59:59.000Z

223

2012 Proceedings of the Performance Metrics for Intelligent ...  

Science Conference Proceedings (OSTI)

Page 1. NIST Special Publication 1136 2012 Proceedings of the Performance Metrics for Intelligent Systems (PerMI '12) Workshop ...

2012-11-19T23:59:59.000Z

224

Questions and Answers - How many atoms would it take to create a ton?  

NLE Websites -- All DOE Office Websites (Extended Search)

there in the world? there in the world? Previous Question (How many atoms are there in the world?) Questions and Answers Main Index Next Question (Could you please explain density?) Could you please explain density? How many atoms would it take to create a ton? There's a lot more to this question than first appears. There are many types of atoms and each of them has its own mass, so the answer varies depending on which atom you are talking about. Since even a tiny bit of matter has many atoms, it has become customary to use the unit "mole" to signify a standard number of atoms, namely, it is Avogadro's number which (almost) equals 6*1023, or 600,000 billion billon. If you look up the periodic table of elements, one of the numbers usually listed is the atomic mass which is the mass (in grams) of one mole of those atoms. Let's use

225

Dynamic performance testing of prototype 3 ton air-cooled carrier absorption chiller  

SciTech Connect

The performance of a prototype 3 ton cooling capacity air-cooled lithium bromide/water absorption chiller was tested using an absorption chiller test facility which was modified to expand its testing capabilities to include air-cooled chillers in addition to water-cooled chillers. Temperatures of the three externally supplied fluid loops: hot water, chilled water, and cooling air, were varied in order to determine the effects this would have on the two principal measures of chiller performance: cooling capacity and thermal coefficient of performance (COP). A number of interrelated factors were identified as contributing to less than expected performance. For comparison, experimental correlations of other investigators for this and other similar absorption chillers are presented. These have been plotted as both contour and three-dimensional performance maps in order to more clearly show the functional dependence of the chiller performance on the fluid loop temperatures.

Borst, R.R.; Wood, B.D.

1985-05-01T23:59:59.000Z

226

Background studies for a ton-scale argon dark matter detector (ArDM)  

E-Print Network (OSTI)

The ArDM project aims at operating a large noble liquid detector to search for direct evidence of Weakly Interacting Massive Particles (WIMP) as Dark Matter in the universe. Background sources relevant to ton-scale liquid and gaseous argon detectors, such as neutrons from detector components, muon-induced neutrons and neutrons caused by radioactivity of rock, as well as the internal $^{39}Ar$ background, are studied with simulations. These background radiations are addressed with the design of an appropriate shielding as well as with different background rejection potentialities. Among them the project relies on event topology recognition, event localization, density ionization discrimination and pulse shape discrimination. Background rates, energy spectra, characteristics of the background-induced nuclear recoils in liquid argon, as well as the shielding performance and rejection performance of the detector are described.

L. Kaufmann; A. Rubbia

2006-12-05T23:59:59.000Z

227

The Universal Connection and Metrics on Moduli Spaces  

E-Print Network (OSTI)

We introduce a class of metrics on gauge theoretic moduli spaces. These metrics are made out of the universal matrix that appears in the universal connection construction of M. S. Narasimhan and S. Ramanan. As an example we construct metrics on the c_{2}=1 SU(2) moduli space of instantons on R^4 for various universal matrices.

Fortune Massamba; George Thompson

2003-11-12T23:59:59.000Z

228

Tangent spaces to metric spaces and to their subspaces  

E-Print Network (OSTI)

We investigate a tangent space at a point of a general metric space and metric space valued derivatives. The conditions under which two different subspace of a metric space have isometric tangent spaces in a common point of these subspaces are completely determinated.

Dovgoshey, O

2009-01-01T23:59:59.000Z

229

Clean Cities 2010 Annual Metrics Report  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

0 Annual 0 Annual Metrics Report Caley Johnson Technical Report NREL/TP-7A30-52714 October 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Clean Cities 2010 Annual Metrics Report Caley Johnson Prepared under Task No. VTP.20020 Technical Report NREL/TP-7A30-52714 October 2012 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

230

Clean Cities 2011 Annual Metrics Report  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

1 Annual 1 Annual Metrics Report Caley Johnson National Renewable Energy Laboratory Technical Report NREL/TP-7A30-56091 December 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Clean Cities 2011 Annual Metrics Report Caley Johnson Prepared under Task No. VTP2.0020 Technical Report NREL/TP-7A30-56091 December 2012 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty,

231

Null limits of the C-metric  

E-Print Network (OSTI)

The C-metric is usually understood as describing two black holes which accelerate in opposite directions under the action of some conical singularity. Here, we examine all the solutions of this type which represent accelerating sources and investigate the null limit in which the accelerations become unbounded. We show that the resulting space-times represent spherical impulsive gravitational waves generated by snapping or expanding cosmic strings.

J. Podolsky; J. B. Griffiths

2000-06-27T23:59:59.000Z

232

Transmission System Reliability Performance Metrics Requirements  

Science Conference Proceedings (OSTI)

Transmission availability has become the significant indicator of overall transmission system operational health, due to increased utilization of the transmission system, growth of deregulated energy wholesale markets, and decreased investment in new transmission assets. Availability trends reflect the increasing dependence upon transmission assets from a technical and market perspective. Presently availability metrics lack comparability due to the non-standardization of underlying data collection method...

2003-12-12T23:59:59.000Z

233

On the Metric of Space-time  

E-Print Network (OSTI)

Maxwell's equations are obeyed in a one-parameter group of isotropic gravity-free flat space-times whose metric depends upon the value of the group parameter. An experimental determination of this value has been proposed. If it is zero, the metric is Minkowski's. If it is non-zero, the metric is not Poincare invariant and local frequencies of electromagnetic waves change as they propagate. If the group parameter is positive, velocity independent red shifts develop and the group parameter plays a role similar to that of Hubble's constant in determining the relation of these redshifts to propagation distance. In the resulting space-times, the velocity dependence of Doppler shifts is a function of propagation distance. If the group parameter and Hubble's constant have the same order of magnitude, observed frequency shifts in radiation received from stellar sources can imply source velocities quite different from those implied in Minkowski space. In these space-times, electromagnetic waves received from bodies in galactic Kepler orbits undergo frequency shifts which are indistinguishable from shifts currently attributed to dark matter and dark energy in Minkowski space, or to a non-Newtonian physics.

Carl E. Wulfman

2013-02-02T23:59:59.000Z

234

Controlled Source Audio MT At Pilgrim Hot Springs Area (DOE GTP...  

Open Energy Info (EERE)

Controlled Source Audio MT At Pilgrim Hot Springs Area (DOE GTP) Exploration Activity Details Location Pilgrim Hot Springs Area Exploration Technique Controlled Source Audio MT...

235

Controlled Source Audio MT At Soda Lake Area (Combs 2006) | Open...  

Open Energy Info (EERE)

Exploration Technique Controlled Source Audio MT Activity Date Usefulness not indicated DOE-funding Unknown Notes "EM sounding, MT, CSAMT, dipole-dipole resistivity; reservoir...

236

Performance metrics and life-cycle information management for building performance assurance  

E-Print Network (OSTI)

is influenced by chiller and cooling tower efficiencies andyr) Chiller (kW/ton) Cooling Tower (kW/ton) Cooling Load (

Hitchcock, R.J.; Piette, M.A.; Selkowitz, S.E.

1998-01-01T23:59:59.000Z

237

Mt St Helens Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Mt St Helens Geothermal Area Mt St Helens Geothermal Area (Redirected from Mt St Helens Area) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Mt St Helens Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (8) 10 References Area Overview Geothermal Area Profile Location: Washington Exploration Region: Cascades GEA Development Phase: 2008 USGS Resource Estimate Mean Reservoir Temp: Estimated Reservoir Volume: Mean Capacity: Click "Edit With Form" above to add content History and Infrastructure Operating Power Plants: 0 No geothermal plants listed. Add a new Operating Power Plant

238

3D Mt Resistivity Imaging For Geothermal Resource Assessment And  

Open Energy Info (EERE)

Resistivity Imaging For Geothermal Resource Assessment And Resistivity Imaging For Geothermal Resource Assessment And Environmental Mitigation At The Glass Mountain Kgra, California Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: 3D Mt Resistivity Imaging For Geothermal Resource Assessment And Environmental Mitigation At The Glass Mountain Kgra, California Details Activities (3) Areas (2) Regions (0) Abstract: MT and TDEM surveys acquired in 2005 were integrated with existing MT and TDEM data recovered from obsolete formats to characterize the geometry of the geothermal reservoir. An interpretation based on the correlation of the 3D MT resistivity with well properties indicated that most of the previous exploration wells had been tarted close to but not in the center of areas tha appeared most likely to be permeable. Such

239

Definition: Controlled Source Audio MT | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Controlled Source Audio MT Jump to: navigation, search Dictionary.png Controlled Source Audio MT Controlled Source Audio-Magnetotellurics (CSAMT) is an active source application of a magnetotelluric survey aimed at providing a more reliable signal and rapid acquisition time relative to a natural source MT measurement.[1] View on Wikipedia Wikipedia Definition Magnetotellurics (MT) is an electromagnetic geophysical method of imaging the earth's subsurface by measuring natural variations of electrical and magnetic fields at the Earth's surface. Investigation depth ranges from 300m below ground by recording higher frequencies down to 10,000m or deeper with long-period soundings. Developed in Russia and

240

Field Mapping At Marysville Mt Area (Blackwell) | Open Energy Information  

Open Energy Info (EERE)

Mt Area (Blackwell) Mt Area (Blackwell) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Field Mapping At Marysville Mt Area (Blackwell) Exploration Activity Details Location Marysville Mt Area Exploration Technique Field Mapping Activity Date Usefulness useful DOE-funding Unknown Notes Geologic mapping has outlined a structure which may be a partial control on the high heat flow. The Cretaceous intrusive (outlined by the magnetic data) and the heat flow anomaly occupy a broad dome in the Precambrian rocks, the stock outcropping in the northwest portion of the dome, and the heat flow anomaly restricted to the southwest portion of the dome. References D. D. Blackwell (Unknown) Exploration In A Blind Geothermal Area Near Marysville, Montana, Usa

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

MT Energie GmbH Co KG | Open Energy Information  

Open Energy Info (EERE)

Saxony, Germany Zip 27404 Sector Services Product MT-Energie provides both turn-key biogas plants and related components and services. Coordinates 53.295765, 9.27964 Loading...

242

Mt. St. Helens' Aerosols: Some Tropospheric and Stratospheric Effects  

Science Conference Proceedings (OSTI)

Aerosol optical depth measurements based on the attenuation of direct solar radiation before and after the six major explosive eruptions of Mt. St. Helens during 1980 are presented. These automated measurements are from a site 200 km mostly cut ...

J. J. Michalsky; G. M. Stokes

1983-04-01T23:59:59.000Z

243

Havre, MT Natural Gas Pipeline Imports From Canada (Million Cubic...  

Annual Energy Outlook 2012 (EIA)

Million Cubic Feet) Havre, MT Natural Gas Pipeline Imports From Canada (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1990's NA...

244

Sweetgrass, MT Liquefied Natural Gas Pipeline Exports to Canada...  

U.S. Energy Information Administration (EIA) Indexed Site

Million Cubic Feet) Sweetgrass, MT Liquefied Natural Gas Pipeline Exports to Canada (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2012 2 2013 3 5 4 6 9...

245

Havre, MT Natural Gas Pipeline Imports From Canada (Dollars per...  

Gasoline and Diesel Fuel Update (EIA)

Dollars per Thousand Cubic Feet) Havre, MT Natural Gas Pipeline Imports From Canada (Dollars per Thousand Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7...

246

Measurable Control System Security through Ideal Driven Technical Metrics  

Science Conference Proceedings (OSTI)

The Department of Homeland Security National Cyber Security Division supported development of a small set of security ideals as a framework to establish measurable control systems security. Based on these ideals, a draft set of proposed technical metrics was developed to allow control systems owner-operators to track improvements or degradations in their individual control systems security posture. The technical metrics development effort included review and evaluation of over thirty metrics-related documents. On the bases of complexity, ambiguity, or misleading and distorting effects the metrics identified during the reviews were determined to be weaker than necessary to aid defense against the myriad threats posed by cyber-terrorism to human safety, as well as to economic prosperity. Using the results of our metrics review and the set of security ideals as a starting point for metrics development, we identified thirteen potential technical metrics - with at least one metric supporting each ideal. Two case study applications of the ideals and thirteen metrics to control systems were then performed to establish potential difficulties in applying both the ideals and the metrics. The case studies resulted in no changes to the ideals, and only a few deletions and refinements to the thirteen potential metrics. This led to a final proposed set of ten core technical metrics. To further validate the security ideals, the modifications made to the original thirteen potential metrics, and the final proposed set of ten core metrics, seven separate control systems security assessments performed over the past three years were reviewed for findings and recommended mitigations. These findings and mitigations were then mapped to the security ideals and metrics to assess gaps in their coverage. The mappings indicated that there are no gaps in the security ideals and that the ten core technical metrics provide significant coverage of standard security issues with 87% coverage. Based on the two case studies and evaluation of the seven assessments, the security ideals demonstrated their value in guiding security thinking. Further, the final set of core technical metrics has been demonstrated to be both usable in the control system environment and provide significant coverage of standard security issues.

Miles McQueen; Wayne Boyer; Sean McBride; Marie Farrar; Zachary Tudor

2008-01-01T23:59:59.000Z

247

DOE Uranium Leasing Program - Lease Tract Metrics  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Uranium Leasing Program -- Lease Tract Metrics Uranium Leasing Program -- Lease Tract Metrics Lease Tract Lessee Lease Date Bid (%) Reclamation Bond a Total Acres Acres Excluded b Comment C-JD-5 Gold Eagle Mining, Inc. 04/30/08 12.00 37,000 150.71 C-JD-5A Golden Eagle Uranium, LLC 06/27/08 20.10 5,000 24.54 C-JD-6 Cotter Corporation 04/30/08 14.20 19,000 530.08 C-JD-7 c Cotter Corporation 04/30/08 27.30 1,206,000 493.01 C-JD-8 Cotter Corporation 04/30/08 36.20 4,000 954.62 C-JD-8A No bids received - remains inactive N/A N/A N/A 77.91 C-JD-9 Cotter Corporation 04/30/08 24.30 72,000 1,036.50 C-SR-10 Golden Eagle Uranium, LLC 06/27/08 13.10 5,000 637.64 C-SR-11 Cotter Corporation 04/30/08 11.67 43,000 1,303.22 200.25 Summit Canyon area excluded from lease tract C-SR-11A Golden Eagle Uranium, LLC 06/27/08 14.30 5,000 1,296.81 C-SR-12 Colorado Plateau Partners 06/27/08

248

Performance Metrics and Budget Division (HC-51) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Performance Metrics and Budget Division (HC-51) Performance Metrics and Budget Division (HC-51) Performance Metrics and Budget Division (HC-51) MISSION: The mission of the Performance Metrics and Budget Division (HC-51) is to support the effective and efficient implementation of the Department of Energy's human capital initiatives and functions through the strategic integration of corporate human capital performance metrics and the budget of the Office of the Chief Human Capital Officer (HC). FUNCTIONS: Human capital performance measurement and strategic functions at the DOE and interagency levels include: Provides analytical support and strategic advice to internal and external HC stakeholders on the appropriate and effective use of performance metrics as a key to effective strategic human capital management.

249

Self-benchmarking Guide for Data Centers: Metrics, Benchmarks, Actions  

E-Print Network (OSTI)

Hours (full cooling) Electrical Power Chain dP1 UPS Peak20 Electrical Power ChainBenchmarking Guide 6. Electrical Power Chain Metrics ID P1

Mathew, Paul

2010-01-01T23:59:59.000Z

250

Harmonizing Global Metrics for Data Center Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

Harmonizing Global Metrics for Data Center Energy Efficiency The United States of America, European Union and Japan Reach Agreement on Guiding Principles for Data Center Energy...

251

Harmonizing Global Metrics for Data Center Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

expanded to provide measurement guidelines and next steps for three additional metrics; Green Energy Coefficient (GEC), Energy Reuse Factor (ERF), and Carbon Usage Effectiveness...

252

About nonlinear contractive conditions on cone metric spaces  

E-Print Network (OSTI)

In the present work we shall show that nonlinear contractive conditions on TVS-cone metric spaces can be reduced to nonlinear contractive conditions on usual metric spaces. Our results extend the results of Du (2010) [W.S. Du, A note on cone metric fixed point theory and its equivalence, Nonlinear Anal. 72 (2010), 2259-2261] and results of Abdeljawad and Rezapour [T. Abdeljawad, Sh. Rezapour, Some fixed point results in TVS-cone metric spaces, Fixed Point Theory (to appear 2012)].

Olaru, Ion

2011-01-01T23:59:59.000Z

253

DOE Hydrogen Analysis Repository: The Oil Security Metrics Model  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary Full Title: The Oil Security Metrics Model: A Tool for Evaluating the Prospective Oil Security Benefits of DOE's Energy Efficiency and Renewable Energy Research and...

254

Harmonizing Global Metrics for Data Center Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

Harmonizing Global Metrics for Data Center Energy Efficiency, February 2, 2010 Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers...

255

How Does Your Data Center Measure Up? Energy Efficiency Metrics...  

NLE Websites -- All DOE Office Websites (Extended Search)

How Does Your Data Center Measure Up? Energy Efficiency Metrics and Benchmarks for Data Center Infrastructure Systems Title How Does Your Data Center Measure Up? Energy Efficiency...

256

Enterprise performance measurement system : metric design framework and tools  

E-Print Network (OSTI)

Existing metric selection methodologies and performance measurement frameworks provide practicing managers with good checklists and tools to evaluate and design their enterprise performance measurement systems (EPMS) and ...

Teo, Kai Siang

2013-01-01T23:59:59.000Z

257

Proposed Rules Would Allow Metric Only Labeling for Some ...  

Science Conference Proceedings (OSTI)

... the FPLA to allow manufacturers to label their products with US customary units (inch/pound/pint, etc.) and metric units (centimeter/kilogram/liter, etc ...

2010-10-05T23:59:59.000Z

258

Self-benchmarking Guide for Laboratory Buildings: Metrics, Benchmarks, Actions  

E-Print Network (OSTI)

Purpose This guide describes energy efficiency metrics andEnergy Use Intensity 28 Laboratory Benchmarking Guidethe energy benchmarking approach describe in this guide can

Mathew, Paul

2010-01-01T23:59:59.000Z

259

Self-benchmarking Guide for Data Centers: Metrics, Benchmarks, Actions  

E-Print Network (OSTI)

Purpose This guide describes energy efficiency metrics andthe energy benchmarking approach describe in this guide candesigners and energy managers. This guide also builds on

Mathew, Paul

2010-01-01T23:59:59.000Z

260

Self-benchmarking Guide for Cleanrooms: Metrics, Benchmarks, Actions  

E-Print Network (OSTI)

Purpose This guide describes energy efficiency metrics andfor Reheat Energy Use Factor Cleanroom Benchmarking Guidethe energy benchmarking approach describe in this guide can

Mathew, Paul

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Forecast error metrics for Navy inventory management performance .  

E-Print Network (OSTI)

??This research establishes metrics for determining overall Navy secondary inventory forecasting accuracy when compared to actual demands at the Naval Inventory Control Point (NAVICP). Specifically,… (more)

Jackson, Kenneth J.

2011-01-01T23:59:59.000Z

262

Grid Performance Metrics Using Model-less Algorithms Pete Sauer...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Grid Performance Metrics Using Model-less Algorithms Pete Sauer and Alejandro D. Domnguez-Garca Department of Electrical and Computer Engineering University of Illinois at...

263

Projections of Full-Fuel-Cycle Energy and Emissions Metrics  

E-Print Network (OSTI)

2012a. “Analysis & Projections - Models & Documentation. ”Projections of Full-Fuel-Cycle Energy and Emissions MetricsGovernment purposes. Projections of Full-Fuel-Cycle Energy

Coughlin, Katie

2013-01-01T23:59:59.000Z

264

NIST Offers US Interpretations of Recent SI (Metric) Changes  

Science Conference Proceedings (OSTI)

... It “Americanizes” the SI to cover correct US usage of metric units, such as the accepted spelling of “meter” and “liter.” In addition, the revised guide ...

2011-10-11T23:59:59.000Z

265

NIST Offers US Interpretations of Recent SI (Metric) Changes  

Science Conference Proceedings (OSTI)

... The 2008 edition of NIST Special Publications (SP) 330, The International System of Units (SI), cover correct US usage of metric units, such as the ...

2013-04-05T23:59:59.000Z

266

Metrics and Benchmarks for Energy Efficiency in Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

commercial buildings. These include daylight factors, illu- minance levels, lamp and ballast efficacy, lighting power density, etc. There are two key metrics for which the...

267

Non-perturbative scalar gauge-invariant metric fluctuations from the Ponce de Leon metric in the STM theory of gravity  

E-Print Network (OSTI)

We study our non-perturbative formalism to describe scalar gauge-invariant metric fluctuations by extending the Ponce de Leon metric.

Mariano Anabitarte; Mauricio Bellini

2007-10-08T23:59:59.000Z

268

Clean Cities 2012 Annual Metrics Report  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Energy Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC. This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. Contract No. DE-AC36-08GO28308 Clean Cities 2012 Annual Metrics Report Caley Johnson National Renewable Energy Laboratory Technical Report NREL/TP-5400-60274 December 2013 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC. This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. Contract No. DE-AC36-08GO28308 National Renewable Energy Laboratory

269

Boundary conditions for metric fluctuations in Lifshitz  

E-Print Network (OSTI)

We consider the quantisation of linearised fluctuations of the metric and matter fields about a Lifshitz background, exploring the possibility of alternative boundary conditions, allowing the slow fall-off modes to fluctuate. We find that for $z >2$, slow fall-off modes for some of the linearised fluctuations are normalizable, which opens up the possibility of considering alternative boundary conditions. Analysing stability, we find that alternative boundary conditions for the momentum density are allowed, but alternative boundary conditions for the energy density lead to an instability of the type we recently discovered in a similar analysis for scalar fields on a fixed Lifshitz background. Our investigation is in the context of the simple massive vector model, but we would expect the conclusions to be more general.

Andrade, Tomas

2013-01-01T23:59:59.000Z

270

Metrics correlation and analysis service (MCAS)  

SciTech Connect

The complexity of Grid workflow activities and their associated software stacks inevitably involves multiple organizations, ownership, and deployment domains. In this setting, important and common tasks such as the correlation and display of metrics and debugging information (fundamental ingredients of troubleshooting) are challenged by the informational entropy inherent to independently maintained and operated software components. Because such an information 'pond' is disorganized, it a difficult environment for business intelligence analysis i.e. troubleshooting, incident investigation and trend spotting. The mission of the MCAS project is to deliver a software solution to help with adaptation, retrieval, correlation, and display of workflow-driven data and of type-agnostic events, generated by disjoint middleware.

Baranovski, Andrew; Dykstra, Dave; Garzoglio, Gabriele; Hesselroth, Ted; Mhashilkar, Parag; Levshina, Tanya; /Fermilab

2009-05-01T23:59:59.000Z

271

Mt. Wachusett Community College Makes Huge Investment in Wind Power |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mt. Wachusett Community College Makes Huge Investment in Wind Power Mt. Wachusett Community College Makes Huge Investment in Wind Power Mt. Wachusett Community College Makes Huge Investment in Wind Power March 14, 2011 - 1:14pm Addthis Mount Wachusett Community College staff Bill Swift, Bob LaBonte, Norm Boudreau, George Couillard and Vestas trainer Bill Fulkerson about to ascend the MWCC north wind turbine | Photo courtesy of GreenOnGreenStreet Mount Wachusett Community College staff Bill Swift, Bob LaBonte, Norm Boudreau, George Couillard and Vestas trainer Bill Fulkerson about to ascend the MWCC north wind turbine | Photo courtesy of GreenOnGreenStreet Mark Higgins Operations Supervisor, Wind & Water Power Technologies Office What will this project do? The turbines are expected to provide an annual savings of approximately $700,000 based on the area's current utility rates.

272

Mt St Helens Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Mt St Helens Geothermal Area Mt St Helens Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Mt St Helens Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (8) 10 References Area Overview Geothermal Area Profile Location: Washington Exploration Region: Cascades GEA Development Phase: 2008 USGS Resource Estimate Mean Reservoir Temp: Estimated Reservoir Volume: Mean Capacity: Click "Edit With Form" above to add content History and Infrastructure Operating Power Plants: 0 No geothermal plants listed. Add a new Operating Power Plant Developing Power Projects: 0

273

CIM: A Reliable Metric for Evaluating Program Phase Classifications  

E-Print Network (OSTI)

CIM: A Reliable Metric for Evaluating Program Phase Classifications Sreekumar V. Kodakara, Jinpyo Interval of estimated Mean (CIM), a metric based on statistical sampling theory, to evaluate the quality of estimated Mean (CIM) correctly estimates the quality of phase classification with a meaningful statistical

Minnesota, University of

274

Integration using invariant operators:Conformally flat radiation metrics  

E-Print Network (OSTI)

A new method is presented for obtaining the general conformally flat radiation metric by using the differential operators of Machado Ramos and Vickers (a generalisation of the GHP operators) which are invariant under null rotations and spin and boosts. The solution is found by constructing involutive tables of these derivatives applied to the quantities which arise in the Karlhede classification of metrics.

S. B. Edgar; J. A. Vickers

1998-08-05T23:59:59.000Z

275

Scalar Metric fluctuations in space time matter inflation  

E-Print Network (OSTI)

Using the Ponce de Leon background metric, which describes a 5D universe in an apparent vacuum: $\\bar{G}_{AB}=0$, we study the effective 4D evolution of both, the inflaton and gauge-invariant scalar metric fluctuations, in the recently introduced model of space time matter inflation.

Mariano Anabitarte; Mauricio Bellini

2006-05-15T23:59:59.000Z

276

Diving decompression models and bubble metrics: Modern computer syntheses  

Science Conference Proceedings (OSTI)

A quantitative summary of computer models in diving applications is presented, underscoring dual phase dynamics and quantifying metrics in tissue and blood. Algorithms covered include the multitissue, diffusion, split phase gradient, linear-exponential, ... Keywords: Bubble metrics, Computer algorithms, Decompression models, Dive computers, Diver staging

B. R. Wienke

2009-04-01T23:59:59.000Z

277

Ideal based cyber security technical metrics for control systems  

Science Conference Proceedings (OSTI)

Much of the world's critical infrastructure is at risk from attack through electronic networks connected to control systems. Security metrics are important because they provide the basis for management decisions that affect the protection of the ... Keywords: control system security, cyber security metrics

Wayne Boyer; Miles McQueen

2007-10-01T23:59:59.000Z

278

Phantom dark energy with tachyonic instability: metric perturbations  

E-Print Network (OSTI)

We study the behavior of metric perturbations in a recently proposed model of phantom dark energy with tachyonic instability at long wavelengths. We find that metric perturbations exponentially grow in time, starting from very small values determined by vacuum fluctuations, and may become sizeable at late times. This property may be of interest for phenomenology.

S. Sergienko; V. Rubakov

2008-03-21T23:59:59.000Z

279

Metrics for Evaluating Conventional and Renewable Energy Technologies (Presentation)  

SciTech Connect

With numerous options for the future of natural gas, how do we know we're going down the right path? How do we designate a metric to measure and demonstrate change and progress, and how does that metric incorporate all stakeholders and scenarios?

Mann, M. K.

2013-01-01T23:59:59.000Z

280

Metrics for Evaluating Conventional and Renewable Energy Technologies (Presentation)  

SciTech Connect

With numerous options for the future of natural gas, how do we know we're going down the right path? How do we designate a metric to measure and demonstrate change and progress, and how does that metric incorporate all stakeholders and scenarios?

Mann, M. K.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Methodology for Estimating ton-Miles of Goods Movements for U.S. Freight Mulitimodal Network System  

SciTech Connect

Ton-miles is a commonly used measure of freight transportation output. Estimation of ton-miles in the U.S. transportation system requires freight flow data at disaggregated level (either by link flow, path flows or origin-destination flows between small geographic areas). However, the sheer magnitude of the freight data system as well as industrial confidentiality concerns in Census survey, limit the freight data which is made available to the public. Through the years, the Center for Transportation Analysis (CTA) of the Oak Ridge National Laboratory (ORNL) has been working in the development of comprehensive national and regional freight databases and network flow models. One of the main products of this effort is the Freight Analysis Framework (FAF), a public database released by the ORNL. FAF provides to the general public a multidimensional matrix of freight flows (weight and dollar value) on the U.S. transportation system between states, major metropolitan areas, and remainder of states. Recently, the CTA research team has developed a methodology to estimate ton-miles by mode of transportation between the 2007 FAF regions. This paper describes the data disaggregation methodology. The method relies on the estimation of disaggregation factors that are related to measures of production, attractiveness and average shipments distances by mode service. Production and attractiveness of counties are captured by the total employment payroll. Likely mileages for shipments between counties are calculated by using a geographic database, i.e. the CTA multimodal network system. Results of validation experiments demonstrate the validity of the method. Moreover, 2007 FAF ton-miles estimates are consistent with the major freight data programs for rail and water movements.

Oliveira Neto, Francisco Moraes [ORNL; Chin, Shih-Miao [ORNL; Hwang, Ho-Ling [ORNL

2013-01-01T23:59:59.000Z

282

Global oil yields: Have we got it seriously wrong?  

Science Conference Proceedings (OSTI)

Up to now, most oilseed crop specialists have assumed that one metric ton (MT) per hectare (1MT/ha) was a pretty good ballpark figure for average oil yields from annual oilseed crops such as canola or sunflower. Global oil yields: Have we got it seriously

283

Selecting Metrics for Sustainable Bioenergy Feedstocks  

SciTech Connect

Key decisions about land-use practices and dynamics in biofuel systems affect the long-term sustainability of biofuels. Choices about what crops are grown and how are they planted, fertilized, and harvested determine the effects of biofuels on native plant diversity, competition with food crops, and water and air quality. Those decisions also affect economic viability since the distance that biofuels must be transported has a large effect on the market cost of biofuels. The components of a landscape approach include environmental and socioeconomic conditions and the bioenergy features [type of fuel, plants species, management practices (e.g., fertilizer and pesticide applications), type and location of production facilities] and ecological and biogeochemical feedbacks. Significantly, while water (availability and quality) emerges as one of the most limiting factors to sustainability of bioenergy feedstocks, the linkage between water and bioenergy choices for land use and management on medium and large scales is poorly quantified. Metrics that quantify environmental and socioeconomic changes in land use and landscape dynamics provide a way to measure and communicate the influence of alternative bioenergy choices on water quality and other components of the environment. Cultivation of switchgrass could have both positive and negative environmental effects, depending on where it is planted and what vegetation it replaces. Among the most important environmental effects are changes in the flow regimes of streams (peak storm flows, base flows during the growing season) and changes in stream water quality (sediment, nutrients, and pesticides). Unfortunately, there have been few controlled studies that provide sufficient data to evaluate the hydrological and water quality impacts of conversion to switchgrass. In particular, there is a need for experimental studies that use the small watershed approach to evaluate the effects of growing a perennial plant as a biomass crop. Small watershed studies have been used for several decades to identify effects of vegetation type, disturbance, and land use and agriculture practices on hydrology and water quality. An ideal experimental design to determine the effects of conversion to switchgrass on surface water hydrology and quality would involve (1) small catchment (5-20 ha) drained by a perennial or ephemeral stream, (2) crop treatments including conversion from row crops to switchgrass; pasture to switchgrass (other likely scenarios); controls (no change in vegetation), (3) treatments to compare different levels of fertilization and pesticide application, (4) riparian treatments to compare riparian buffers with alternative cover types, and a treatment with no buffer, and (5) 3-4 replicates of each treatment or BACI (before-after, control-intervention) design for unreplicated treatments (ideally with several years of measurements prior to the imposition of treatments for BACI design). Hydrologic measurements would include soil moisture patterns with depth and over time; nitrogen and phosphorus chemistry; soil solution chemistry - major anions and cations, inorganic and organic forms of carbon, nitrogen and phosphorus; precipitation amount and chemical deposition; stream discharge; and streamwater chemistry. These water quality metrics would need to be put into context of the other environmental and social conditions that are altered by growth of bioenergy feedstocks. These conditions include farm profits and yield of food and fuel, carbon storage and release, and a variety of ecosystem services such as enhanced biodiversity and pollinator services. Innovations in landscape design for bioenergy feedstocks take into account environmental and socioeconomic dynamics and consequences with consideration of alternative bioenergy regimes and policies. The ideal design would be scale-sensitive so that economic, social, and environmental constraints can be measured via metrics applicable at relevant scales. To develop a landscape design, land managers must consider (1) what are the environmental im

Dale, Virginia H [ORNL; Kline, Keith L [ORNL; Mulholland, Patrick J [ORNL; Downing, Mark [ORNL; Graham, Robin Lambert [ORNL; Wright, Lynn L [ORNL

2009-01-01T23:59:59.000Z

284

Practical Diagnostics for Evaluating Residential Commissioning Metrics  

SciTech Connect

In this report, we identify and describe 24 practical diagnostics that are ready now to evaluate residential commissioning metrics, and that we expect to include in the commissioning guide. Our discussion in the main body of this report is limited to existing diagnostics in areas of particular concern with significant interactions: envelope and HVAC systems. These areas include insulation quality, windows, airtightness, envelope moisture, fan and duct system airflows, duct leakage, cooling equipment charge, and combustion appliance backdrafting with spillage. Appendix C describes the 83 other diagnostics that we have examined in the course of this project, but that are not ready or are inappropriate for residential commissioning. Combined with Appendix B, Table 1 in the main body of the report summarizes the advantages and disadvantages of all 107 diagnostics. We first describe what residential commissioning is, its characteristic elements, and how one might structure its process. Our intent in this discussion is to formulate and clarify these issues, but is largely preliminary because such a practice does not yet exist. Subsequent sections of the report describe metrics one can use in residential commissioning, along with the consolidated set of 24 practical diagnostics that the building industry can use now to evaluate them. Where possible, we also discuss the accuracy and usability of diagnostics, based on recent laboratory work and field studies by LBNL staff and others in more than 100 houses. These studies concentrate on evaluating diagnostics in the following four areas: the DeltaQ duct leakage test, air-handler airflow tests, supply and return grille airflow tests, and refrigerant charge tests. Appendix A describes those efforts in detail. In addition, where possible, we identify the costs to purchase diagnostic equipment and the amount of time required to conduct the diagnostics. Table 1 summarizes these data. Individual equipment costs for the 24 practical diagnostics range from a few hundred dollars to many thousands of dollars. The higher costs are associated with infrared thermography and state-of-the-art automated diagnostic systems. Most tests can be performed in one hour or less, using equipment priced toward the lower end of the cost spectrum.

Wray, Craig; Walker, Iain; Siegel, Jeff; Sherman, Max

2002-06-11T23:59:59.000Z

285

Werner Steimle, MT(ASCP) OSU Student Health Services Laboratory  

E-Print Network (OSTI)

Werner Steimle, MT(ASCP) OSU Student Health Services Laboratory Staff Medical Technologist OSU Student Health Services Laboratory Corvallis, OR · 1998 ­ 2007 Section Supervisor, Laboratory Salem Hospital Regional Health Services Salem, OR · 1994 ­ 1998 Lead Medical Technologist/ Oregon

Tullos, Desiree

286

Evaluating N-gram based evaluation metrics for automatic keyphrase extraction  

Science Conference Proceedings (OSTI)

This paper describes a feasibility study of n-gram-based evaluation metrics for automatic keyphrase extraction. To account for near-misses currently ignored by standard evaluation metrics, we adapt various evaluation metrics developed for machine ...

Su Nam Kim; Timothy Baldwin; Min-Yen Kan

2010-08-01T23:59:59.000Z

287

Overcoming the l1 non-embeddability barrier: algorithms for product metrics  

Science Conference Proceedings (OSTI)

A common approach for solving computational problems over a difficult metric space is to embed the "hard" metric into L1 which admits efficient algorithms and is thus considered an "easy" metric. This approach has proved successful ...

Alexandr Andoni; Piotr Indyk; Robert Krauthgamer

2009-01-01T23:59:59.000Z

288

Weighting and Bayes Nets for Rollup of Surveillance Metrics  

SciTech Connect

The LANL IKE team proposes that the surveillance metrics for several data stream that are used to detect the same failure mode be weighted. Similarly, the failure mode metrics are weighted to obtain a subsystem metric. E.g., if there n data streams (nodes 1-n), the failure mode (node 0) metric is obtained as M{sub 0} = w{sub 1}M{sub 1} + {hor_ellipsis} + w{sub n}M{sub n}, where {Sigma}{sub i=1}{sup n} w{sub i} = 1. This proposal has been implemented with Bayes Nets using the Netica/IKE software by specifying an appropriate conditional probability table (CPT). This CPT is calculated using the same form as (1), where the data stream metrics for the true (T) and false (F) states are replaced by 1 and 0, respectively. Then using this CPT, the failure mode metric calculated by Netica/IKE equals (1). This result has two nice features. First, the rollup Bayes nets is doing can be easily explained. Second, because Bayes Nets can implement this rollup using Netica/IKE, then data marshalling (allocating next year's budget) can be studied. A proof that the claim 'failure mode metric calculated by Netica/IKE equals (1)' for n = 2 and n = 3 follows as well as the sketch of a proof by induction for general n.

Henson, Kriste [Los Alamos National Laboratory; Sentz, Kari [Los Alamos National Laboratory; Hamada, Michael [Los Alamos National Laboratory

2012-04-30T23:59:59.000Z

289

Self-benchmarking Guide for Data Centers: Metrics, Benchmarks, Actions  

SciTech Connect

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in data centers. This guide is primarily intended for personnel who have responsibility for managing energy use in existing data centers - including facilities managers, energy managers, and their engineering consultants. Additionally, data center designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior data center benchmarking studies supported by the California Energy Commission. Much of the benchmarking data are drawn from the LBNL data center benchmarking database that was developed from these studies. Additional benchmark data were obtained from engineering experts including facility designers and energy managers. This guide also builds on recent research supported by the U.S. Department of Energy's Save Energy Now program.

Mathew, Paul; Ganguly, Srirupa; Greenberg, Steve; Sartor, Dale

2009-07-13T23:59:59.000Z

290

Measuring solar reflectance-Part I: Defining a metric that accurately...  

NLE Websites -- All DOE Office Websites (Extended Search)

I: Defining a metric that accurately predicts solar heat gain Title Measuring solar reflectance-Part I: Defining a metric that accurately predicts solar heat gain Publication Type...

291

GRR/Section 13-MT-a - Land Use Assessment | Open Energy Information  

Open Energy Info (EERE)

MT-a - Land Use Assessment < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 13-MT-a - Land Use...

292

Metrics of Software Evolution as Effort Predictors - A Case Study  

Science Conference Proceedings (OSTI)

Despite its importance, cost estimation in the context of continuing software evolution has been relatively unexplored. This paper addresses this omission by describing some models that predict effort as a function of a suite of metrics of software evolution. ...

Juan F. Ramil; Meir M. Lehman

2000-10-01T23:59:59.000Z

293

Metrics and Benchmarks for Energy Efficiency in Laboratories  

E-Print Network (OSTI)

energy efficiency metrics and benchmarks for laboratories, at the whole buildingBuilding Site Energy BTU/sf-yr). A performance Benchmark isBenchmarks Good Practice ID Building B1 Name Unit Building Site Energy

Mathew, Paul

2007-01-01T23:59:59.000Z

294

Islands of Reliability for Hybrid Topological-Metric Mapping  

E-Print Network (OSTI)

Islands of Reliability for Hybrid Topological-Metric Mapping Shlomo Saul Simhon TR-CIM-99-6319 Telex: 05 268510 FAX: (514) 398-7348 Email: cim@cim.mcgill.ca #12;ABSTRACT This thesis describes

Dudek, Gregory

295

Nonlinear Gravity Theories in the Metric and Palatini Formalisms  

E-Print Network (OSTI)

We study nonlinear gravity theories in both the metric and the Palatini (metric-affine) formalisms. The nonlinear character of the gravity lagrangian in the metric formalism causes the appearance of a scalar source of matter in Einstein’s equations that can be interpreted as a quintessence field. However, in the Palatini case no new energy sources appear, though the equations of motion get modified in such a way that usual matter can lead to repulsive gravity at very low densities. Thus, the Palatini formalism could provide a mechanism to explain the recent acceleration of the universe without the necessity of dark energy sources. We also show that in contrast to the metric formalism where only the Einstein frame should be considered as physical, the Palatini formalism allows both the Einstein and the Jordan frames to be physically acceptable.

Gonzalo J. Olmo A; William Komp A

2004-01-01T23:59:59.000Z

296

Nonlinear Gravity Theories in the Metric and Palatini Formalisms  

E-Print Network (OSTI)

We study nonlinear gravity theories in both the metric and the Palatini (metric-affine) formalisms. The nonlinear character of the gravity lagrangian in the metric formalism causes the appearance of a scalar source of matter in Einstein's equations that can be interpreted as a quintessence field. However, in the Palatini case no new energy sources appear, though the equations of motion get modified in such a way that usual matter can lead to repulsive gravity at very low densities. Thus, the Palatini formalism could provide a mechanism to explain the recent acceleration of the universe without the necessity of dark energy sources. We also show that in contrast to the metric formalism where only the Einstein frame should be considered as physical, the Palatini formalism allows both the Einstein and the Jordan frames to be physically acceptable.

Gonzalo J. Olmo; William Komp

2004-03-22T23:59:59.000Z

297

Towards Efficient Supercomputing: Searching for the Right Efficiency Metric  

Science Conference Proceedings (OSTI)

The efficiency of supercomputing has traditionally been in the execution time. In early 2000 s, the concept of total cost of ownership was re-introduced, with the introduction of efficiency measure to include aspects such as energy and space. Yet the supercomputing community has never agreed upon a metric that can cover these aspects altogether and also provide a fair basis for comparison. This paper exam- ines the metrics that have been proposed in the past decade, and proposes a vector-valued metric for efficient supercom- puting. Using this metric, the paper presents a study of where the supercomputing industry has been and how it stands today with respect to efficient supercomputing.

Hsu, Chung-Hsing [ORNL; Kuehn, Jeffery A [ORNL; Poole, Stephen W [ORNL

2012-01-01T23:59:59.000Z

298

Generalized Banach contraction in probabilistic metric/normed spaces  

E-Print Network (OSTI)

In this paper, we present the generalization of B-contraction and C-contraction due to Sehgal and Hicks respectively. We also study some properties of C-contraction in probabilistic metric space.

Lafuerza-Guillen, Bernardo

2007-01-01T23:59:59.000Z

299

Analyses Of Two End-User Software Vulnerability Exposure Metrics  

SciTech Connect

The risk due to software vulnerabilities will not be completely resolved in the near future. Instead, putting reliable vulnerability measures into the hands of end-users so that informed decisions can be made regarding the relative security exposure incurred by choosing one software package over another is of importance. To that end, we propose two new security metrics, average active vulnerabilities (AAV) and vulnerability free days (VFD). These metrics capture both the speed with which new vulnerabilities are reported to vendors and the rate at which software vendors fix them. We then examine how the metrics are computed using currently available datasets and demonstrate their estimation in a simulation experiment using four different browsers as a case study. Finally, we discuss how the metrics may be used by the various stakeholders of software and to software usage decisions.

Jason L. Wright; Miles McQueen; Lawrence Wellman

2012-08-01T23:59:59.000Z

300

Modified gravity from the quantum part of the metric  

E-Print Network (OSTI)

It is shown that if a metric in quantum gravity can be decomposed as a sum of classical and quantum parts then Einstein quantum gravity looks approximately like modified gravity with a nonminimal interaction between gravity and matter.

Vladimir Dzhunushaliev; Vladimir Folomeev; Burkhard Kleihaus; Jutta Kunz

2013-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Impact of Different Economic Performance Metrics on the Perceived...  

NLE Websites -- All DOE Office Websites (Extended Search)

low IRRs up to the reinvestment rate and high IRRs down to the reinvestment rate (McKinsey & Co. 2004). The IRR and MIRR metrics are likely to be used to evaluate commercial...

302

Performance metrics for soil moisture retrievals and application requirements  

E-Print Network (OSTI)

Quadratic performance metrics such as root-mean-square error (RMSE) and time series correlation are often used to assess the accuracy of geophysical retrievals (satellite measurements) with respect to true fields. These ...

Entekhabi, Dara

303

Issues and Uncertainties Affecting Metrics for Aviation Impacts on Climate  

Science Conference Proceedings (OSTI)

Metrics such as radiative forcing and global warming potential have proven to be useful tools in climate policy–related studies, including evaluation of the effects of aviation on climate, to relate different emissions to one another in order to ...

Don Wuebbles; Piers Forster; Helen Rogers; Redina Herman

2010-04-01T23:59:59.000Z

304

PARABOLIC COMPARISON PRINCIPLE AND QUASIMINIMIZERS IN METRIC MEASURE SPACES  

E-Print Network (OSTI)

PARABOLIC COMPARISON PRINCIPLE AND QUASIMINIMIZERS IN METRIC MEASURE SPACES JUHA KINNUNEN AND MATHIAS MASSON Abstract. We give several characterizations of parabolic (quasisuper)- minimizers prove a version of com- parison principle for super- and subminimizers on parabolic space-time cylinders

Kinnunen, Juha

305

Applying Software Engineering Metrics to Land Surface Parameterization Schemes  

Science Conference Proceedings (OSTI)

In addition to model validation techniques and intermodel comparison projects, the authors propose the use of software engineering metrics as an additional tool for the enhancement of “quality” in climate models. By discriminating between ...

A. Henderson-Sellers; A. J. Pitman; B. Henderson-Sellers; D. Pollard; J. M. Verner

1995-05-01T23:59:59.000Z

306

Analysis of Solar Cell Quality Using Voltage Metrics: Preprint  

DOE Green Energy (OSTI)

The highest efficiency solar cells provide both excellent voltage and current. Of these, the open-circuit voltage (Voc) is more frequently viewed as an indicator of the material quality. However, since the Voc also depends on the band gap of the material, the difference between the band gap and the Voc is a better metric for comparing material quality of unlike materials. To take this one step further, since Voc also depends on the shape of the absorption edge, we propose to use the ultimate metric: the difference between the measured Voc and the Voc calculated from the external quantum efficiency using a detailed balance approach. This metric is less sensitive to changes in cell design and definition of band gap. The paper defines how to implement this metric and demonstrates how it can be useful in tracking improvements in Voc, especially as Voc approaches its theoretical maximum.

Toberer, E. S.; Tamboli, A. C.; Steiner, M.; Kurtz, S.

2012-06-01T23:59:59.000Z

307

Schwarzschild-de Sitter Metric and Inertial Beltrami Coordinates  

E-Print Network (OSTI)

Under consideration of coordinate conditions, we get the Schwarzschild-Beltrami-de Sitter (S-BdS) metric solution of the Einstein field equations with a cosmological constant $\\Lambda$. A brief review to the de Sitter invariant special relativity (dS-SR), and de Sitter general relativity (dS-GR, or GR with a $\\Lambda$) is presented. The Beltrami metric $B_{\\mu\

Li-Feng Sun; Mu-Lin Yan; Ya Deng; Wei Huang; Sen Hu

2013-08-23T23:59:59.000Z

308

Software Metrics Knowledge and Databases for Project Management  

Science Conference Proceedings (OSTI)

Abstract¿Construction and maintenance of large, high-quality software projects is a complex, error-prone, and difficult process. Tools employing software database metrics can play an important role in efficient execution and management of such large ... Keywords: Knowledge-based tools for software project management, efficiency and robustness in large-scale software development, knowledge abstraction from raw data, software metrics databases, test and evaluation, cost-effective project management.

Raymond A. Paul; Tosiyasu L. Kunii; Yoshihisa Shinagawa; Muhammad F. Khan

1999-01-01T23:59:59.000Z

309

Measures of agreement between computation and experiment:validation metrics.  

SciTech Connect

With the increasing role of computational modeling in engineering design, performance estimation, and safety assessment, improved methods are needed for comparing computational results and experimental measurements. Traditional methods of graphically comparing computational and experimental results, though valuable, are essentially qualitative. Computable measures are needed that can quantitatively compare computational and experimental results over a range of input, or control, variables and sharpen assessment of computational accuracy. This type of measure has been recently referred to as a validation metric. We discuss various features that we believe should be incorporated in a validation metric and also features that should be excluded. We develop a new validation metric that is based on the statistical concept of confidence intervals. Using this fundamental concept, we construct two specific metrics: one that requires interpolation of experimental data and one that requires regression (curve fitting) of experimental data. We apply the metrics to three example problems: thermal decomposition of a polyurethane foam, a turbulent buoyant plume of helium, and compressibility effects on the growth rate of a turbulent free-shear layer. We discuss how the present metrics are easily interpretable for assessing computational model accuracy, as well as the impact of experimental measurement uncertainty on the accuracy assessment.

Barone, Matthew Franklin; Oberkampf, William Louis

2005-08-01T23:59:59.000Z

310

File:INL-geothermal-mt.pdf | Open Energy Information  

Open Energy Info (EERE)

mt.pdf mt.pdf Jump to: navigation, search File File history File usage Montana Geothermal Resources Size of this preview: 728 × 600 pixels. Full resolution ‎(5,100 × 4,200 pixels, file size: 1.99 MB, MIME type: application/pdf) Description Montana Geothermal Resources Sources Idaho National Laboratory Authors Patrick Laney; Julie Brizzee Related Technologies Geothermal Creation Date 2003-11-01 Extent State Countries United States UN Region Northern America States Montana File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment current 12:41, 16 December 2010 Thumbnail for version as of 12:41, 16 December 2010 5,100 × 4,200 (1.99 MB) MapBot (Talk | contribs) Automated upload from NREL's "mapsearch" data

311

Micro-Earthquake At Marysville Mt Area (Blackwell) | Open Energy  

Open Energy Info (EERE)

Area (Blackwell) Area (Blackwell) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Micro-Earthquake At Marysville Mt Area (Blackwell) Exploration Activity Details Location Marysville Mt Area Exploration Technique Micro-Earthquake Activity Date Usefulness not indicated DOE-funding Unknown Notes A seismic ground noise was carried out but the ground noise in the anomaly area (and the surrounding region) was extremely low, approximately 4 orders of magnitude below that observed in the geothermal areas in the Salton Sea between 1-10 Hz (in units of power density). Because of this very low background noise the micro-earthquake survey was possible with instrument gains well in excess of a million. Regional micro-earthquake activity was located within about 15 km of the geothermal area but no micro-earthquakes

312

Mt. Edgecumbe High School Wind Project | Open Energy Information  

Open Energy Info (EERE)

Edgecumbe High School Wind Project Edgecumbe High School Wind Project Jump to: navigation, search Name Mt. Edgecumbe High School Wind Project Facility Mt. Edgecumbe High School Sector Wind energy Facility Type Community Wind Location AK Coordinates 57.053928°, -135.356903° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":57.053928,"lon":-135.356903,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

313

Conceptual design study on incorporating a 25-ton/day pyrolysis unit into an operating total energy system. Final report  

DOE Green Energy (OSTI)

The results of a conceptual design study on incorporating a pyrolysis unit into an existing total energy plant are presented. The objectives of this study were to examine the institutional, technical and economic factors affecting the incorporation of a 25-ton/day pyrolysis unit into the Indian Creek Total Energy Plant. The Indian Creek total energy plant is described. Results of the conceptual design are presented. A survey of the availability of waste materials and a review of health and safety ordinances are included. The technical aspects of the pyrolysis system are discussed, including the results of the review of facilities requirements for the pyrolysis unit, the analysis of necessary system modification, and an estimate of the useful energy contribution by the pyrolysis unit. Results of the life-cycle cost analysis of the pyrolysis unit are presented. The major conclusions are that: there appears to be no institutional or technical barriers to constructing a waste pyrolysis unit at the Indian Creek Total Energy Plant; pyrolysis gas can be consumed in the engines and the boilers by utilizing venturi mixing devices; the engines can consume only 5% of the output of the 25-ton/day pyrolysis unit; Therefore, consumption of pyrolysis gas will be controlled by boiler energy demand patterns; a waste pyrolysis unit is not cost effective at the current natural gas price of $0.90/10/sup 6/ Btu; and pyrolysis is economically attractive at natural gas prices above $3.00/10/sup 6/ Btu.

None

1976-12-13T23:59:59.000Z

314

Thermal And-Or Near Infrared At Marysville Mt Area (Blackwell) | Open  

Open Energy Info (EERE)

Marysville Mt Area (Blackwell) Marysville Mt Area (Blackwell) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Thermal And-Or Near Infrared At Marysville Mt Area (Blackwell) Exploration Activity Details Location Marysville Mt Area Exploration Technique Thermal And-Or Near Infrared Activity Date Usefulness not indicated DOE-funding Unknown Notes No further mention of infrared photography. References D. D. Blackwell (Unknown) Exploration In A Blind Geothermal Area Near Marysville, Montana, Usa Retrieved from "http://en.openei.org/w/index.php?title=Thermal_And-Or_Near_Infrared_At_Marysville_Mt_Area_(Blackwell)&oldid=386636" Category: Exploration Activities What links here Related changes Special pages Printable version Permanent link Browse properties

315

Integrating Process Unit Energy Metrics into Plant Energy Management Systems  

E-Print Network (OSTI)

As energy costs continue to rise across the process industry, many plants have responded by developing improved energy monitoring and reporting programs. At the center of such programs are typically spreadsheet or database applications that pull information, such as fired heater excess oxygen and steam vent rates, from the plant data historian and generate summary reports that compare and trend actual performance relative to targets. On average, plants can expect to reduce overall energy costs by up to 10% through improved management of plant variables, or metrics, that influence energy consumption. Energy metrics can generally be classified into three categories: Equipment, Utility System, and Process. Examples of each type of metric will be given in the paper. As a percentage of the overall savings sited above, the energy savings through stewardship and optimization of Equipment, Utility System and Process metrics are generally 50%, 40% and 10%, respectively. Plants have generally done a good job of stewarding the 90% of savings available through Utility and Equipment related energy metrics, primarily because target setting is fairly straightforward. However, the 10% of savings available from Process metrics, such as tower reflux ratios, pumparound rates, and steam stripping ratios, are typically missing from energy management systems due to the difficulty in first identifying them, and second in determining the optimum targets. Target setting is most difficult because with process metrics, yield considerations must be included in the target setting process. It is quite easy, for example, to save energy by cutting tower reflux rates. But too much reduction will sacrifice yield performance. Even at elevated energy prices, even the smallest reduction in yield will typically offset any energy savings that might have been captured. Therefore, in order to effectively incorporate Process energy metrics into the plant energy management system, knowledge of both energy and yield parameters is required. This paper will explore an effective methodology for determining what process unit energy metrics are important, how to effectively set their targets, and how to incorporate them into an effective energy management system. In terms of how to identify process energy metrics, the paper will discuss which energy intensive processes should be examined first, such as crude distillation and cat cracking. In terms of target setting, the paper will describe how process engineering experience is combined with simulation to develop meaningful targets that characterize the point where yield and energy are simultaneously optimized. Finally, the work process required

Davis, J. L.; Knight, N.

2005-01-01T23:59:59.000Z

316

Use of metrics in an effective ALARA program  

Science Conference Proceedings (OSTI)

ALARA radiological protection programs require metrics to meet their objectives. Sources of metrics include external dosimetry; internal dosimetry; radiological occurrences from the occurrence reporting an processing system (ORPS); and radiological incident reports (RIR). The sources themselves contain an abundance of specific {open_quotes}indicators.{close_quotes} To choose the site-specific indicators that will be tracked and trended requires careful review. Justification is needed to defend the indicators selected and maybe even stronger justification is needed for those indicators that are available, but not chosen as a metric. Historically, the many different sources of information resided in a plethora of locations. Even the same type of metric had data located in different areas and could not be easily totaled for the entire Site. This required the end user to expend valuable time and effort to locate the data they needed. To address this problem, a central metrics database has been developed so that a customer can have all their questions addressed quickly and correctly. The database was developed in the beginning to answer some of the customer`s most frequently asked questions. IL is now also a tool to communicate the status of the radiation protection program to facility managers. Finally, it also addresses requirements contained in the Rad Con manual and the 10CFR835 implementation guides. The database uses currently available, {open_quotes}user friendly,{close_quotes} software and contains information from RIR`s, ORPS, and external dosimetry records specific to ALARA performance indicators. The database is expandable to allow new metrics input. Specific reports have been developed to assist customers in their tracking and trending of ALARA metrics. These include quarterly performance indicator reports, monthly radiological incident reports, monthly external dose history and goals tracking reports, and the future use of performance indexing.

Bates, B.B. Jr. [Los Alamos National Laboratory, NM (United States)

1996-06-01T23:59:59.000Z

317

Exploration Cost and Time Metric | Open Energy Information  

Open Energy Info (EERE)

Exploration Cost and Time Metric Exploration Cost and Time Metric Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Exploration Cost and Time Metric Agency/Company /Organization: NREL Sector: Energy Focus Area: Geothermal Phase: Prepare a Plan Topics: Background analysis, Baseline projection, Resource assessment Resource Type: Application prototype, Online calculator User Interface: Website Website: openei.org/apps/xct_metric/ Country: United States Web Application Link: openei.org/apps/xct_metric/ Cost: Free OpenEI Keyword(s): Featured UN Region: Northern America Coordinates: 37.09024°, -95.712891° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.09024,"lon":-95.712891,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

318

Effective use of metrics in an ALARA program  

SciTech Connect

ALARA radiological protection programs require metrics to meet their objectives. Sources of metrics include; external dosimetry; internal dosimetry; radiological occurrences from the occurrence reporting and processing system (ORPS); and radiological incident reports (RIR). The sources themselves contain an abundance of specific ``indicators``. To choose the site-specific indicators that will be tracked and trended requires careful review. This required the end users to expend valuable time and effort to locate the data they needed. To address this problem, a central metrics database has been developed so that customers can have all their questions addressed quickly and correctly. The database was developed in the beginning to answer some of the customer`s most frequently asked questions. It is now also a tool to communicate the status of the radiation protection program to facility managers. Finally it also addresses requirements contained in the Rad Con manual and the 10CFR835 implementation guides. The database uses currently available, ``user friendly``, software and contains information from RIR`s, ORPS, and external dosimetry records specific to ALARA performance indicators. The database is expandable to allow new metrics input. Specific reports have been developed to assist customers in their tracking and trending of ALARA metrics.

Bates, B.B. Jr.

1996-07-01T23:59:59.000Z

319

Metrics Evolution in an Energy Research & Development Program  

Science Conference Proceedings (OSTI)

All technology programs progress through three phases: Discovery, Definition, and Deployment. The form and application of program metrics needs to evolve with each phase. During the discovery phase, the program determines what is achievable. A set of tools is needed to define program goals, to analyze credible technical options, and to ensure that the options are compatible and meet the program objectives. A metrics system that scores the potential performance of technical options is part of this system of tools, supporting screening of concepts and aiding in the overall definition of objectives. During the definition phase, the program defines what specifically is wanted. What is achievable is translated into specific systems and specific technical options are selected and optimized. A metrics system can help with the identification of options for optimization and the selection of the option for deployment. During the deployment phase, the program shows that the selected system works. Demonstration projects are established and classical systems engineering is employed. During this phase, the metrics communicate system performance. This paper discusses an approach to metrics evolution within the Department of Energy's Nuclear Fuel Cycle R&D Program, which is working to improve the sustainability of nuclear energy.

Brent Dixon

2011-08-01T23:59:59.000Z

320

Methods and results for stress analyses on 14-ton, thin-wall depleted UF{sub 6} cylinders  

Science Conference Proceedings (OSTI)

Uranium enrichment operations at the three US gaseous diffusion plants produce depleted uranium hexafluoride (DUF{sub 6}) as a residential product. At the present time, the inventory of DUF{sub 6} in this country is more than half a million tons. The inventory of DUF{sub 6} is contained in metal storage cylinders, most of which are located at the gaseous diffusion plants. The principal objective of the project is to ensure the integrity of the cylinders to prevent causing an environmental hazard by releasing the contents of the cylinders into the atmosphere. Another objective is to maintain the cylinders in such a manner that the DUF{sub 6} may eventually be converted to a less hazardous material for final disposition. An important task in the DUF{sub 6} cylinders management project is determining how much corrosion of the walls can be tolerated before the cylinders are in danger of being damaged during routine handling and shipping operations. Another task is determining how to handle cylinders that have already been damaged in a manner that will minimize the chance that a breach will occur or that the size of an existing breach will be significantly increased. A number of finite element stress analysis (FESA) calculations have been done to analyze the stresses for three conditions: (1) while the cylinder is being lifted, (2) when a cylinder is resting on two cylinders under it in the customary two-tier stacking array, and (3) when a cylinder is resting on tis chocks on the ground. Various documents describe some of the results and discuss some of the methods whereby they have been obtained. The objective of the present report is to document as many of the FESA cases done at Oak Ridge for 14-ton thin-wall cylinders as possible, giving results and a description of the calculations in some detail.

Kirkpatrick, J.R.; Chung, C.K.; Frazier, J.L.; Kelley, D.K.

1996-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Property:ExplorationCostPerMetric | Open Energy Information  

Open Energy Info (EERE)

ExplorationCostPerMetric ExplorationCostPerMetric Jump to: navigation, search Property Name ExplorationCostPerMetric Property Type String Description the unit ratio denominator for exploration cost Allows Values 100 feet cut;30 foot core;compound;day;element;foot;hour;mile;point;process;sample;sq. mile;station;Subject;well Subproperties This property has the following 107 subproperties: A Active Seismic Methods Active Seismic Techniques Active Sensors Analytical Modeling B Borehole Seismic Techniques C Cation Geothermometers Chemical Logging Conceptual Model Core Holes Cross-Dipole Acoustic Log D DC Resistivity Survey (Dipole-Dipole Array) DC Resistivity Survey (Mise-Á-La-Masse) DC Resistivity Survey (Pole-Dipole Array) DC Resistivity Survey (Schlumberger Array) DC Resistivity Survey (Wenner Array)

322

Property:ExplorationTimePerMetric | Open Energy Information  

Open Energy Info (EERE)

ExplorationTimePerMetric ExplorationTimePerMetric Jump to: navigation, search Property Name ExplorationTimePerMetric Property Type String Description the unit ratio denominator for exploration time Allows Values job;10 mile;10 stn;100 mile;sq. mile;foot Subproperties This property has the following 121 subproperties: A Active Seismic Methods Active Seismic Techniques Active Sensors Analytical Modeling B Borehole Seismic Techniques C Cation Geothermometers Chemical Logging Compound and Elemental Analysis Conceptual Model Core Holes Cross-Dipole Acoustic Log D DC Resistivity Survey (Dipole-Dipole Array) DC Resistivity Survey (Mise-Á-La-Masse) DC Resistivity Survey (Pole-Dipole Array) DC Resistivity Survey (Schlumberger Array) DC Resistivity Survey (Wenner Array) Data Collection and Mapping Data Techniques

323

Metrics for Evaluating the Accuracy of Solar Power Forecasting: Preprint  

Science Conference Proceedings (OSTI)

Forecasting solar energy generation is a challenging task due to the variety of solar power systems and weather regimes encountered. Forecast inaccuracies can result in substantial economic losses and power system reliability issues. This paper presents a suite of generally applicable and value-based metrics for solar forecasting for a comprehensive set of scenarios (i.e., different time horizons, geographic locations, applications, etc.). In addition, a comprehensive framework is developed to analyze the sensitivity of the proposed metrics to three types of solar forecasting improvements using a design of experiments methodology, in conjunction with response surface and sensitivity analysis methods. The results show that the developed metrics can efficiently evaluate the quality of solar forecasts, and assess the economic and reliability impact of improved solar forecasting.

Zhang, J.; Hodge, B. M.; Florita, A.; Lu, S.; Hamann, H. F.; Banunarayanan, V.

2013-10-01T23:59:59.000Z

324

m(T2): The Truth behind the glamour.  

E-Print Network (OSTI)

ar X iv :h ep -p h/ 03 04 22 6v 1 2 3 A pr 2 00 3 Cavendish HEP-2002-02/14 PACS: 14.80.Ly 13.85.Qk mT2 : the truth behind the glamour Alan Barr† Christopher Lester‡ Phil Stephens§ Cavendish Laboratory, University of Cambridge, Madingley Road... .5 % 22.2 % Table 1: The lightest chargino mass, the mass difference, ?M?˜1 = m?+1 ?m?01 , and two chargino branching ratios for the AMSB-like points discussed in section 4.2. The hadronic branching ratios can be found in [7]. 4.2 Case 2 – AMSB...

Barr, Alan; Lester, Christopher G; Stephens, Phil

325

Full list of Portfolio Manager custom reporting metrics | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Full list of Portfolio Manager custom reporting metrics Full list of Portfolio Manager custom reporting metrics Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

326

Harmonizing Global Metrics for Data Center Energy Efficiency, February 2,  

NLE Websites -- All DOE Office Websites (Extended Search)

Harmonizing Global Metrics for Data Center Energy Efficiency, Harmonizing Global Metrics for Data Center Energy Efficiency, February 2, 2010 Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

327

Primer Control System Cyber Security Framework and Technical Metrics  

Science Conference Proceedings (OSTI)

The Department of Homeland Security National Cyber Security Division supported development of a control system cyber security framework and a set of technical metrics to aid owner-operators in tracking control systems security. The framework defines seven relevant cyber security dimensions and provides the foundation for thinking about control system security. Based on the developed security framework, a set of ten technical metrics are recommended that allow control systems owner-operators to track improvements or degradations in their individual control systems security posture.

Wayne F. Boyer; Miles A. McQueen

2008-05-01T23:59:59.000Z

328

Inhomogeneous parabolic equations on unbounded metric measure spaces  

E-Print Network (OSTI)

We study inhomogeneous semilinear parabolic equations with source term f independent of time u_{t}={\\Delta}u+u^{p}+f(x) on a metric measure space, subject to the conditions that f(x)\\geq 0 and u(0,x)=\\phi(x)\\geq 0. By establishing Harnack-type inequalities in time t and some powerful estimates, we give sufficient conditions for non-existence, local existence, and global existence of weak solutions. This paper generalizes previous results on Euclidean spaces to general metric measure spaces.

Kenneth J. Falconer; Jiaxin Hu; Yuhua Sun

2011-03-29T23:59:59.000Z

329

Metrics and Benchmarks for Energy Efficiency in Laboratories  

E-Print Network (OSTI)

benchmarks that are based on the actual measured energy use of comparable buildings.energy efficiency metrics and benchmarks for laboratories, which have been developed and applied to several laboratory buildings –building targets be evaluated against empirical benchmarks that are based on the measured energy

Mathew, Paul; Rumsey Engineers

2008-01-01T23:59:59.000Z

330

Fuzzy Logic-based Mobility Metric Clustering Algorithm for MANETs  

Science Conference Proceedings (OSTI)

Mobile ad-hoc network, MANET is a collection of wireless mobile nodes dynamically forming a temporary communication network without using any existing infrastructure or centralized administration. To reduce routing overhead, computational complexity ... Keywords: Cluster, Fuzzy Clustering, Fuzzy Logic, MANET, Mobility Metric

P. Venkateswaran; Mousumi Kundu; Srishti Shaw; Kanika Orea; R. Nandi

2011-07-01T23:59:59.000Z

331

A Fisher-Rao Metric for Paracatadioptric Images of Lines  

Science Conference Proceedings (OSTI)

In a central paracatadioptric imaging system a perspective camera takes an image of a scene reflected in a paraboloidal mirror. A 360° field of view is obtained, but the image is severely distorted. In particular, straight lines in the scene project ... Keywords: Central projection, Fisher-Rao metric, Hough transform, Line detection, Paraboloidal mirror, Paracatadioptric system, Sobel operator, Trace transform

Stephen J. Maybank; Siohoi Ieng; Ryad Benosman

2012-09-01T23:59:59.000Z

332

Density-metric unimodular gravity: Vacuum maximal symmetry  

SciTech Connect

We have investigated the vacuum maximally symmetric solutions of recently proposed density-metric unimodular gravity theory. The results are widely different from inflationary scenario. The exponential dependence on time in deSitter space is substituted by a power law. Open space-times with non-zero cosmological constant are excluded.

Abbassi, A.H., E-mail: ahabbasi@modares.ac.ir [Department of Physics, School of Sciences, Tarbiat Modares University, P.O. Box 14155-4838, Tehran (Iran, Islamic Republic of); Abbassi, A.M., E-mail: amabasi@khayam.ut.ac.ir [Department of Physics, University of Tehran, P.O. Box 14155-6455, Tehran (Iran, Islamic Republic of)

2011-05-15T23:59:59.000Z

333

Enabling Large-Scale Deliberation Using Attention-Mediation Metrics  

Science Conference Proceedings (OSTI)

Humanity now finds itself faced with a range of highly complex and controversial challenges--such as climate change, the spread of disease, international security, scientific collaborations, product development, and so on--that call upon us to bring ... Keywords: Argumentation, Deliberation, Metrics

Mark Klein

2012-10-01T23:59:59.000Z

334

Robust Metric Inequalities for the ?-Robust Network Loading Problem  

E-Print Network (OSTI)

classical NLP and give the state of the art of metric inequalities. ... routed between the nodes of G. Every commodity consists of an ordered source-target pair (sk, tk) ... with a unit cost ?e for e ? E. The number of capacity units installed at edge e ...

335

Metrics based performance control over text mining tools in bioinformatics  

Science Conference Proceedings (OSTI)

Bioinformatics is a field of biology merging with few other sciences like information technology and statistics which involves in the discovery of new tools for data analysis and interpretation of accurate result. Some of the areas in which bioinformatics ... Keywords: bioinformatics, performance control, performance evaluation, software metrics, text mining

Jayanthi Manicassamy; P. Dhavachelvan

2009-01-01T23:59:59.000Z

336

Metrics and Benchmarks for Energy Efficiency in Laboratories  

Science Conference Proceedings (OSTI)

A wide spectrum of laboratory owners, ranging from universities to federal agencies, have explicit goals for energy efficiency in their facilities. For example, the Energy Policy Act of 2005 (EPACT 2005) requires all new federal buildings to exceed ASHRAE 90.1-2004 1 by at least 30 percent. The University of California Regents Policy requires all new construction to exceed California Title 24 2 by at least 20 percent. A new laboratory is much more likely to meet energy efficiency goals if quantitative metrics and targets are explicitly specified in programming documents and tracked during the course of the delivery process. If efficiency targets are not explicitly and properly defined, any additional capital costs or design time associated with attaining higher efficiencies can be difficult to justify. The purpose of this guide is to provide guidance on how to specify and compute energy efficiency metrics and benchmarks for laboratories, at the whole building as well as the system level. The information in this guide can be used to incorporate quantitative metrics and targets into the programming of new laboratory facilities. Many of these metrics can also be applied to evaluate existing facilities. For information on strategies and technologies to achieve energy efficiency, the reader is referred to Labs21 resources, including technology best practice guides, case studies, and the design guide (available at www.labs21century.gov/toolkit).

Mathew, Paul

2007-10-26T23:59:59.000Z

337

MESUR: USAGE-BASED METRICS OF SCHOLARLY IMPACT  

SciTech Connect

The evaluation of scholarly communication items is now largely a matter of expert opinion or metrics derived from citation data. Both approaches can fail to take into account the myriad of factors that shape scholarly impact. Usage data has emerged as a promising complement to existing methods o fassessment but the formal groundwork to reliably and validly apply usage-based metrics of schlolarly impact is lacking. The Andrew W. Mellon Foundation funded MESUR project constitutes a systematic effort to define, validate and cross-validate a range of usage-based metrics of schlolarly impact by creating a semantic model of the scholarly communication process. The constructed model will serve as the basis of a creating a large-scale semantic network that seamlessly relates citation, bibliographic and usage data from a variety of sources. A subsequent program that uses the established semantic network as a reference data set will determine the characteristics and semantics of a variety of usage-based metrics of schlolarly impact. This paper outlines the architecture and methodology adopted by the MESUR project and its future direction.

BOLLEN, JOHAN [Los Alamos National Laboratory; RODRIGUEZ, MARKO A. [Los Alamos National Laboratory; VAN DE SOMPEL, HERBERT [Los Alamos National Laboratory

2007-01-30T23:59:59.000Z

338

Wireless capacity with oblivious power in general metrics  

Science Conference Proceedings (OSTI)

The capacity of a wireless network is the maximum possible amount of simultaneous communication, taking interference into account. Formally, we treat the following problem. Given is a set of links, each a sender-receiver pair located in a metric space, ...

Magnús M. Halldórsson; Pradipta Mitra

2011-01-01T23:59:59.000Z

339

Preliminary results for the abundance of multicored EAS at Mt. Norikura  

Science Conference Proceedings (OSTI)

Multicore type EAS was observed by 54 m2 spark chamber at Mt. Norikura (740 g/?cm2). As a preliminary result

Norikura Air Shower Group

1979-01-01T23:59:59.000Z

340

Taking out 1 billion tons of CO2: The magic of China's 11th Five-Year Plan?  

SciTech Connect

China's 11th Five-Year Plan (FYP) sets an ambitious target for energy-efficiency improvement: energy intensity of the country's gross domestic product (GDP) should be reduced by 20% from 2005 to 2010 (NDRC, 2006). This is the first time that a quantitative and binding target has been set for energy efficiency, and signals a major shift in China's strategic thinking about its long-term economic and energy development. The 20% energy intensity target also translates into an annual reduction of over 1.5 billion tons of CO2 by 2010, making the Chinese effort one of most significant carbon mitigation effort in the world today. While it is still too early to tell whether China will achieve this target, this paper attempts to understand the trend in energy intensity in China and to explore a variety of options toward meeting the 20% target using a detailed end-use energy model.

Zhou, Nan; Lin, Jiang; Zhou, Nan; Levine, Mark; Fridley, David

2007-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Chemical reactions of UF{sub 6} with water on ingress to damaged model 48X 10 ton cylinder  

Science Conference Proceedings (OSTI)

Chemistry studies of the effects of water flooding in Model 48X 10-ton UF{sub 6} storage cylinders, as a result of impact fractures, were conducted to support the Safety Analysis Report for Packaging (SARP) review of the Paducah Tiger Overpack for transportation of those cylinders. The objectives of the study were to determine the maximum amount of water that could be admitted to the interior of such a damaged cylinder, the resulting geometries and chemical compositions from reactions of water with the UF{sub 6} contents of the cylinder, and the end-state water moderated and reflected configurations for input to nuclear criticality safety analyses. The case identified for analysis was the flooding of the inside of a cylinder, submerged horizontally in 3 ft of water. The flooding was driven by an initial pressure drop of 13 psig, through an assumed fracture (1/32 in. wide {times} 1/2 in. deep {times} 18 in. long) in the barrel of the cylinder. During the initial addition of water, transient back pressures occur from the effects of the heats of reaction and solution at the water/UF{sub 6} interface, with some chugging as more water is added to alternately coot the reaction surface and then heat it again as the added water reacts with more UF{sub 6}.

Rothman, A.B.

1996-02-01T23:59:59.000Z

342

Mt Carmel Public Utility Co | Open Energy Information  

Open Energy Info (EERE)

Public Utility Co Public Utility Co Jump to: navigation, search Name Mt Carmel Public Utility Co Place Illinois Utility Id 13032 Utility Location Yes Ownership I NERC Location SERC NERC SERC Yes ISO MISO Yes Activity Buying Transmission Yes Activity Distribution Yes Activity Bundled Services Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] Energy Information Administration Form 826[2] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Electric Service Commercial Commercial Electric Space Heating Service Commercial Large Light and Power Electric Service - Less Than 10 MW Industrial Large Light and Power Electric Service - equal or greater than 10 MW

343

Mt Wheeler Power, Inc (Utah) | Open Energy Information  

Open Energy Info (EERE)

Utah Utah Utility Id 13073 References Energy Information Administration.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png No rate schedules available. Average Rates Residential: $0.0786/kWh Commercial: $0.0810/kWh Industrial: $0.0610/kWh The following table contains monthly sales and revenue data for Mt Wheeler Power, Inc (Utah). Month RES REV (THOUSAND $) RES SALES (MWH) RES CONS COM REV (THOUSAND $) COM SALES (MWH) COM CONS IND_REV (THOUSAND $) IND SALES (MWH) IND CONS OTH REV (THOUSAND $) OTH SALES (MWH) OTH CONS TOT REV (THOUSAND $) TOT SALES (MWH) TOT CONS 2009-03 11.289 138.131 203 9.256 101.356 114 1.61 12.38 14 22.155 251.867 331

344

Village of Mt Horeb, Wisconsin (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Horeb, Wisconsin (Utility Company) Horeb, Wisconsin (Utility Company) Jump to: navigation, search Name Mt Horeb Village of Place Wisconsin Utility Id 13036 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Cp-1 Small Power Service Industrial Cp-1 Small Power Service Primary Metering Discount with Parallel Generation(20kW or less) Industrial Cp-1 Small Power Service Primary Metering and Transformer Ownership Discount Industrial Cp-1 Small Power Service Primary Metering and Transformer Ownership

345

A novel multi-scale intensity metric for evaluation of tropical cyclone intensity forecasts  

Science Conference Proceedings (OSTI)

In this study, a new Multi-Scale Intensity (MSI) metric for evaluating Tropical Cyclone (TC) intensity forecasts is presented. The metric consists of the resolvable and observable, low wavenumber intensity represented by the sum of amplitudes of ...

Tomislava Vukicevic; Eric Uhlhorn; Paul Reasor; Bradley Klotz

346

Rule-based partial MT using enhanced finite-state grammars in NooJ  

Science Conference Proceedings (OSTI)

The paper argues for the viability and utility of partial machine translation (MT) in multilingual information systems. The notion of partial MT is modelled on partial parsing and involves a bottomup pattern matching approach where the finite-state transducers ... Keywords: NooJ system, finite-state language processing, local grammars, machine translation, multilingual information systems

Tamás Váradi

2007-06-01T23:59:59.000Z

347

Complexity results on labeled shortest path problems from wireless routing metrics  

Science Conference Proceedings (OSTI)

Metrics to assess the cost of paths through networks are critical to ensuring the efficiency of network routing. This is particularly true in multi-radio multi-hop wireless networks. Effective metrics for these networks must measure the cost of a wireless ... Keywords: Approximation algorithms, Labeled paths, Shortest paths, Wireless routing metrics

Charles B. Ward; Nathan M. Wiegand

2010-02-01T23:59:59.000Z

348

By Thomas S. Jones Manganese (Mn) is essential to iron and silicomanganese increased about 7%. consisted of, in tons, natural battery-grade ore,  

E-Print Network (OSTI)

about 7%. consisted of, in tons, natural battery-grade ore, steel production by virtue of its sulfur aluminum alloys and is used in oxide form in dry cell batteries. The overall level and nature of manganese consumption in batteries was denoted by the expansion on schedule of domestic capacity for production

Torgersen, Christian

349

GRR/Section 7-MT-a - Energy Facility Siting | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 7-MT-a - Energy Facility Siting GRR/Section 7-MT-a - Energy Facility Siting < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 7-MT-a - Energy Facility Siting 07MTAEnergyFacilitySiting (6).pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Regulations & Policies Montana Major Facility Siting Act ARM Title 17 Triggers None specified Click "Edit With Form" above to add content 07MTAEnergyFacilitySiting (6).pdf 07MTAEnergyFacilitySiting (6).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative The Montana Major Facility Siting Act governs the siting of energy facilities in Montana. 7-MT-a.1 to 7-MT-a.2 - Does the Power Plant Have a Production Capacity of

350

Self Potential At Mt Princeton Hot Springs Area (Richards, Et Al., 2010) |  

Open Energy Info (EERE)

Self Potential At Mt Princeton Hot Springs Area (Richards, Et Al., 2010) Self Potential At Mt Princeton Hot Springs Area (Richards, Et Al., 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Self Potential At Mt Princeton Hot Springs Area (Richards, Et Al., 2010) Exploration Activity Details Location Mt Princeton Hot Springs Area Exploration Technique Self Potential Activity Date Usefulness useful DOE-funding Unknown Notes Used to map fracture and fluid flow patterns. References K. Richards, A. Revil, A. Jardani, F. Henderson, M. Batzle, A. Haas (2010) Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs, Colorado, Using Geoelectrical Methods Retrieved from "http://en.openei.org/w/index.php?title=Self_Potential_At_Mt_Princeton_Hot_Springs_Area_(Richards,_Et_Al.,_2010)&oldid=388680"

351

Direct-Current Resistivity Survey At Marysville Mt Area (Blackwell) | Open  

Open Energy Info (EERE)

Direct-Current Resistivity Survey At Marysville Mt Area (Blackwell) Direct-Current Resistivity Survey At Marysville Mt Area (Blackwell) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current Resistivity Survey At Marysville Mt Area (Blackwell) Exploration Activity Details Location Marysville Mt Area Exploration Technique Direct-Current Resistivity Survey Activity Date Usefulness not indicated DOE-funding Unknown Notes A dipole-dipole resistivity survey of the area was carried out with estimated penetration up to 700 meters and no indication of low values of resistivity were found associated with the thermal anomaly. References D. D. Blackwell (Unknown) Exploration In A Blind Geothermal Area Near Marysville, Montana, Usa Retrieved from "http://en.openei.org/w/index.php?title=Direct-Current_Resistivity_Survey_At_Marysville_Mt_Area_(Blackwell)&oldid=510539

352

Custom Reporting: Full List of Available Information and Metrics  

NLE Websites -- All DOE Office Websites (Extended Search)

Custom Reporting: Custom Reporting: Full List of Available Information and Metrics Cost Performance Metrics Units Energy Cost Dollars Energy Cost Intensity Dollars National Median Energy Cost Dollars Total Water Cost (All Water Types) Dollars Indoor Water Cost (All Water Types) Dollars Indoor Water Cost Intensity (All Water Types) Dollars/ft2 Outdoor Water Cost (All Water Types) Dollars Investment in Energy Projects, Cumulatve Dollars Investment in Energy Projects, Cumulatve Dollars/ft2 Water/Wastewater Investment in Energy Projects, Cumulative Dollars/GPD Estimated Savings from Energy Projects, Cumulative Dollars Estimated Savings from Energy Projects, Cumulative Dollars/ft2 Water/Wastewater Estimated Savings from Energy Projects, Cumulative Dollars/GPD Electricity (Grid Purchase) Cost Dollars

353

Advanced Space Propulsion Based on Vacuum (Spacetime Metric) Engineering  

E-Print Network (OSTI)

A theme that has come to the fore in advanced planning for long-range space exploration is the concept that empty space itself (the quantum vacuum, or spacetime metric) might be engineered so as to provide energy/thrust for future space vehicles. Although far-reaching, such a proposal is solidly grounded in modern physical theory, and therefore the possibility that matter/vacuum interactions might be engineered for space-flight applications is not a priori ruled out. As examples, the current development of theoretical physics addresses such topics as warp drives, traversable wormholes and time machines that provide for such vacuum engineering possibilities. We provide here from a broad perspective the physics and correlates/consequences of the engineering of the spacetime metric.

Harold E. Puthoff

2012-02-03T23:59:59.000Z

354

Aspects of metric-like higher-spin geometry  

Science Conference Proceedings (OSTI)

We consider the higher-derivative equations obtained setting to zero the divergence of the higher-spin curvatures in metric-like form, showing their equivalence to the second-order equations emerging from the tensionless limit of open string field theory, propagating reducible spectra of particles with different spins. This result can be viewed as complementary to the possibility of setting to zero a single trace of the higher-spin field strengths, yielding an equation known to imply Fronsdal's equation in the compensator form. We review the general context and results obtained in the investigation of metric-like higher-spin geometry, the structure of the corresponding non-local actions, together with their links to more conventional, local forms including a recently proposed one for higher-spin theories with transverse gauge invariance.

Francia, D. [Centro Studi e Ricerche E. Fermi, piazza del Viminale 1, I-00184 Roma, Italy and Scuola Normale Superiore and INFN, Piazza dei Cavalieri 7, I-56126 Pisa (Italy)

2012-09-24T23:59:59.000Z

355

Review of corrosion in 10- and 14-ton mild steel depleted UF{sub 6} storage cylinders  

Science Conference Proceedings (OSTI)

A literature review was conducted to determine the type, extent and severity of corrosion found in the 10- and 14-ton mild steel depleted UF{sub 6} storage cylinders. Also discussed in this review is corrosion found in the valves and plugs used in the cylinders. Corrosion of the cylinders is a gradual process which occurs slowly over time. Understanding corrosion of the cylinders is an important concern for long term storage of the UF{sub 6} in the cylinder yards, as well as the final disposition of the depleted UF{sub 6} tails inventory in the future. The following conclusions are made from the literature review: (1) The general external corrosion rate of the cylinders is about 1 to 2 mils per year (1 mil = 0.001{double_prime}). The highest general external corrosion rate was over 5 mpy on the 48G type cylinders. (2) General internal corrosion from the depleted UF{sub 6} is negligible under normal storage conditions. Crevice corrosion can occur at the cylinder/saddle interface from the retention of water in this area. Crevice corrosion can occur at the cylinder/skirt interface on the older skirted cylinders due to the lack of water drainage in this area. Crevice corrosion can occur on cylinders that have been in ground contact. Crevice corrosion and galvanic corrosion can occur where the stainless steel I.D. nameplates are attached to the cylinder. The packing nuts on the bronze one-inch valves used in the cylinders are susceptible to stress corrosion cracking (SCC). Mechanical damage from routine handling can lead to a breach in a cylinder with subsequent accelerated corrosion of the mild steel due to attack from HF and other UF{sub 6} hydrolysis by-products.

Lykins, M.L.

1995-08-01T23:59:59.000Z

356

Applicability of the linearly perturbed FRW metric and Newtonian cosmology  

E-Print Network (OSTI)

It has been argued that the effect of cosmological structure formation on the average expansion rate is negligible, because the linear approximation to the metric remains applicable in the regime of non-linear density perturbations. We discuss why the arguments based on the linear theory are not valid. We emphasise the difference between Newtonian gravity and the weak field, small velocity limit of general relativity in the cosmological setting.

Syksy Rasanen

2010-02-25T23:59:59.000Z

357

Development of Technology Readiness Level (TRL) Metrics and Risk Measures  

Science Conference Proceedings (OSTI)

This is an internal project milestone report to document the CCSI Element 7 team's progress on developing Technology Readiness Level (TRL) metrics and risk measures. In this report, we provide a brief overview of the current technology readiness assessment research, document the development of technology readiness levels (TRLs) specific to carbon capture technologies, describe the risk measures and uncertainty quantification approaches used in our research, and conclude by discussing the next steps that the CCSI Task 7 team aims to accomplish.

Engel, David W.; Dalton, Angela C.; Anderson, K. K.; Sivaramakrishnan, Chandrika; Lansing, Carina

2012-10-01T23:59:59.000Z

358

Colliding Wave Solutions in a Symmetric Non-metric Theory  

E-Print Network (OSTI)

A method is given to generate the non-linear interaction (collision) of linearly polarized gravity coupled torsion waves in a non-metric theory. Explicit examples are given in which strong mutual focussing of gravitational waves containing impulsive and shock components coupled with torsion waves does not result in a curvature singularity. However, the collision of purely torsion waves displays a curvature singularity in the region of interaction.

Ozay Gurtug; Mustafa Halilsoy

2008-09-22T23:59:59.000Z

359

Mt Princeton Hot Springs Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Princeton Hot Springs Geothermal Area Princeton Hot Springs Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Mt Princeton Hot Springs Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (2) 10 References Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"TERRAIN","zoom":6,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"500px","height":"300px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.73166667,"lon":-106.17,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

360

Biomass as Feedstock for a Bioenergy and Bioproducts Industry: The Technical Feasability of a Billion-Ton Annual Supply  

SciTech Connect

The U.S. Department of Energy (DOE) and the U.S. Department of Agriculture (USDA) are both strongly committed to expanding the role of biomass as an energy source. In particular, they support biomass fuels and products as a way to reduce the need for oil and gas imports; to support the growth of agriculture, forestry, and rural economies; and to foster major new domestic industries--biorefineries--making a variety of fuels, chemicals, and other products. As part of this effort, the Biomass R&D Technical Advisory Committee, a panel established by the Congress to guide the future direction of federally funded biomass R&D, envisioned a 30 percent replacement of the current U.S. petroleum consumption with biofuels by 2030. Biomass--all plant and plant-derived materials including animal manure, not just starch, sugar, oil crops already used for food and energy--has great potential to provide renewable energy for America's future. Biomass recently surpassed hydropower as the largest domestic source of renewable energy and currently provides over 3 percent of the total energy consumption in the United States. In addition to the many benefits common to renewable energy, biomass is particularly attractive because it is the only current renewable source of liquid transportation fuel. This, of course, makes it invaluable in reducing oil imports--one of our most pressing energy needs. A key question, however, is how large a role could biomass play in responding to the nation's energy demands. Assuming that economic and financial policies and advances in conversion technologies make biomass fuels and products more economically viable, could the biorefinery industry be large enough to have a significant impact on energy supply and oil imports? Any and all contributions are certainly needed, but would the biomass potential be sufficiently large to justify the necessary capital replacements in the fuels and automobile sectors? The purpose of this report is to determine whether the land resources of the United States are capable of producing a sustainable supply of biomass sufficient to displace 30 percent or more of the country's present petroleum consumption--the goal set by the Advisory Committee in their vision for biomass technologies. Accomplishing this goal would require approximately 1 billion dry tons of biomass feedstock per year.

Perlack, R.D.

2005-12-15T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Biomass as Feedstock for a Bioenergy and Bioproducts Industry: The Technical Feasability of a Billion-Ton Annual Supply  

DOE Green Energy (OSTI)

The U.S. Department of Energy (DOE) and the U.S. Department of Agriculture (USDA) are both strongly committed to expanding the role of biomass as an energy source. In particular, they support biomass fuels and products as a way to reduce the need for oil and gas imports; to support the growth of agriculture, forestry, and rural economies; and to foster major new domestic industries--biorefineries--making a variety of fuels, chemicals, and other products. As part of this effort, the Biomass R&D Technical Advisory Committee, a panel established by the Congress to guide the future direction of federally funded biomass R&D, envisioned a 30 percent replacement of the current U.S. petroleum consumption with biofuels by 2030. Biomass--all plant and plant-derived materials including animal manure, not just starch, sugar, oil crops already used for food and energy--has great potential to provide renewable energy for America's future. Biomass recently surpassed hydropower as the largest domestic source of renewable energy and currently provides over 3 percent of the total energy consumption in the United States. In addition to the many benefits common to renewable energy, biomass is particularly attractive because it is the only current renewable source of liquid transportation fuel. This, of course, makes it invaluable in reducing oil imports--one of our most pressing energy needs. A key question, however, is how large a role could biomass play in responding to the nation's energy demands. Assuming that economic and financial policies and advances in conversion technologies make biomass fuels and products more economically viable, could the biorefinery industry be large enough to have a significant impact on energy supply and oil imports? Any and all contributions are certainly needed, but would the biomass potential be sufficiently large to justify the necessary capital replacements in the fuels and automobile sectors? The purpose of this report is to determine whether the land resources of the United States are capable of producing a sustainable supply of biomass sufficient to displace 30 percent or more of the country's present petroleum consumption--the goal set by the Advisory Committee in their vision for biomass technologies. Accomplishing this goal would require approximately 1 billion dry tons of biomass feedstock per year.

Perlack, R.D.

2005-12-15T23:59:59.000Z

362

MT3D: a 3 dimensional magnetotelluric modeling program (user's guide and documentation for Rev. 1)  

DOE Green Energy (OSTI)

MT3D.REV1 is a non-interactive computer program written in FORTRAN to do 3-dimensional magnetotelluric modeling. A 3-D volume integral equation has been adapted to simulate the MT response of a 3D body in the earth. An integro-difference scheme has been incorporated to increase the accuracy. This is a user's guide for MT3D.REV1 on the University of Utah Research Institute's (UURI) PRIME 400 computer operating under PRIMOS IV, Rev. 17.

Nutter, C.; Wannamaker, P.E.

1980-11-01T23:59:59.000Z

363

Data Collection and Reporting for Metrics and Benefits  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Collection and Reporting for Collection and Reporting for Metrics and Benefits Smart Grid Investment Grant Program Joe Paladino November 19, 2009 Investments Transformation Results * Equipment Manufacturing * Customer Systems * Advanced Metering Infrastructure * Electric Distribution Systems * Electric Transmission Systems * Integrated and/or Crosscutting Systems Customer Empowerment * Job Creation and Marketplace Innovation * Reduced Peak Load and Consumption * Operational Efficiency * Grid Reliability and Resilience * More Distributed and Renewable Energy * Lower Carbon Dioxide Emissions Advanced Grid Functionality An Opportunity for Transformation Primary Intent Is to Determine SGIG Program Impact Secondary Intent Is to Learn (to Address Uncertainty) Project-Based Cost/Benefit Analysis SGIG Program - Building the

364

Energy Emission by Quantum Systems in an Expanding FRW Metric  

E-Print Network (OSTI)

Bound quantum mechanical systems not expanding with the comoving frame of an expanding, flat FRW metric are found to release energy at a rate linearly proportional to the local Hubble constant ($H_{o}$) and the systems' binding energy ($E_{b}$); {\\em i.e.}, $\\dot{E} = H_{o} E_{b}$. Three exemplary quantum systems are examined. For systems with early cosmological condensation times | notably hadrons | time-integrated energy release could have been significant and could account for an appreciable fraction of the dark matter inventory.

D. P. Sheehan; V. G. Kriss

2004-11-11T23:59:59.000Z

365

Microsoft Word - DOE_ANNUAL_METRICS_2009Q3.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

14404 14404 Third Quarter 2009 Modeling Program Metric: Coupled model comparison with observations using improved dynamics at coarse resolution Quantifying the impact of a finite volume dynamical core in CCSM3 on simulated precipitation over major catchment areas July 2009 Peter J. Gleckler and Karl E. Taylor Lawrence Livermore National Laboratory Livermore, CA Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research 
 2
 Disclaimer This document was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor Lawrence Livermore National Security, LLC, nor any of their employees makes any warranty,

366

Metrics for the National SCADA Test Bed Program  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy Office of Electricity Delivery and Energy Reliability (DOE-OE) National SCADA Test Bed (NSTB) Program is providing valuable inputs into the electric industry by performing topical research and development (R&D) to secure next generation and legacy control systems. In addition, the program conducts vulnerability and risk analysis, develops tools, and performs industry liaison, outreach and awareness activities. These activities will enhance the secure and reliable delivery of energy for the United States. This report will describe metrics that could be utilized to provide feedback to help enhance the effectiveness of the NSTB Program.

Craig, Philip A.; Mortensen, J.; Dagle, Jeffery E.

2008-12-05T23:59:59.000Z

367

Toward a new metric for ranking high performance computing systems.  

SciTech Connect

The High Performance Linpack (HPL), or Top 500, benchmark [1] is the most widely recognized and discussed metric for ranking high performance computing systems. However, HPL is increasingly unreliable as a true measure of system performance for a growing collection of important science and engineering applications. In this paper we describe a new high performance conjugate gradient (HPCG) benchmark. HPCG is composed of computations and data access patterns more commonly found in applications. Using HPCG we strive for a better correlation to real scientific application performance and expect to drive computer system design and implementation in directions that will better impact performance improvement.

Heroux, Michael Allen; Dongarra, Jack. [University of Tennessee, Knoxville, TN

2013-06-01T23:59:59.000Z

368

User's Guide to the Energy Charting and Metrics Tool (ECAM)  

SciTech Connect

The intent of this user guide is to provide a brief description of the functionality of the Energy Charting and Metrics (ECAM) tool, including the expanded building re-tuning functionality developed for Pacific Northwest National laboratory (PNNL). This document describes the tool's general functions and features, and offers detailed instructions for PNNL building re-tuning charts, a feature in ECAM intended to help building owners and operators look at trend data (recommended 15-minute time intervals) in a series of charts (both time series and scatter) to analyze air-handler, zone, and central plant information gathered from a building automation system (BAS).

Taasevigen, Danny J.; Koran, William

2012-02-28T23:59:59.000Z

369

Investigations on catalyzed steam gasification of biomass: feasibility study of methanol production via catalytic gasification of 200 tons of wood per day  

DOE Green Energy (OSTI)

This report is a result of an additional study made of the economic feasibility of producing fuel grade methanol from wood via catalytic gasification with steam. The report has as its basis the original 2000 tons of wood per day study generated from process development unit testing performed by the Pacific Northwest Laboratory (PNL). The goal of this additional work was to determine the feasibility of a smaller scale plant one tenth the size of the original or 200 tons of dry wood feed per day. Plant production based on this wood feed is 100 tons per day of methanol with a HHV of 9784 Btu per pound. All process and support facilities necessary to convert wood to methanol are included in this study. The plant location is Newport, Oregon. The capital cost for the plant is $34,830,000 - September 1980 basis. Methanol production costs which allow for return on capital have been calculated for various wood prices for both utility and private investor financing. These wood costs include delivery to the plant. For utility financing, the methanol production costs are, respectively, $1.20, $1.23, $1.30, and $1.44 per gallon for wood costs of $5, $10, $20, and $40 per dry ton. For private investor financing, the corresponding product costs are $1.60, $1.63, $1.70, and $1.84 per gallon for the corresponding wood costs. The costs calculated by the utility financing method include a return on equity of 15% and an interest rate of 10% on the debt. The private investor financing method, which is 100% equity financing, incorporates a discounted cash flow (DCF) return on equity of 12%. The thermal efficiency of the plant is 52.0%.

Mudge, L.K.; Weber, S.L.; Mitchell, D.H.; Sealock, L.J. Jr.; Robertus, R.J.

1981-01-01T23:59:59.000Z

370

Investigations on catalyzed steam gasification of biomass. Appendix B: feasibility study of methanol production via catalytic gasification of 2000 tons of wood per day  

SciTech Connect

A study has been made of the economic feasibility of producing fuel grade methanol from wood via catalytic gasification with steam. The plant design in this study was developed from information on gasifier operation supplied by the Pacific Northwest Laboratory (PNL), operated by Battelle. PNL obtained this information from laboratory and process development unit testing. The plant is designed to process 2000 tons per day of dry wood to methanol. Plant production is 997 tons per day of methanol with a HHV of 9784 Btu per pound. All process and support facilities necessary to convert wood to methanol are included in this study. The plant location is Newport, Oregon. The capital cost for the plant is $120,830,000 - September 1980 basis. Methanol production costs which allow for return on capital have been calculated for various wood prices for both utility and private investor financing. These wood costs include delivery to the plant. For utility financing, the methanol production costs are respectively $.45, $.48, $.55, and $.69 per gallon for wood costs of $5, $10, $20, and $40 per dry ton. For private investor financing, the corresponding product costs are $.59, $.62, $.69, and $.83 per gallon for the corresponding wood costs. Both calculation methods include a return on equity capital in the costs. The thermal efficiency of the plant is 52.9%.

Mudge, L.K.; Weber, S.L.; Mitchell, D.H.; Sealock, L.J. Jr.; Robertus, R.J.

1981-01-01T23:59:59.000Z

371

Integrated dense array and transect MT surveying at dixie valley geothermal  

Open Energy Info (EERE)

dense array and transect MT surveying at dixie valley geothermal dense array and transect MT surveying at dixie valley geothermal area, Nevada- structural controls, hydrothermal alteration and deep fluid sources Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Integrated dense array and transect MT surveying at dixie valley geothermal area, Nevada- structural controls, hydrothermal alteration and deep fluid sources Authors Philip E. Wannamaker, William M. Doerner and Derrick P. Hasterok Conference proceedings, 32th workshop on geothermal reservoir Engineering, Stanford University; Stanford University; 2007 Published Publisher Not Provided, 2007 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Integrated dense array and transect MT surveying at dixie valley geothermal area, Nevada- structural controls, hydrothermal

372

A Portable Elf-Mt System For Shallow Resistivity Sounding | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » A Portable Elf-Mt System For Shallow Resistivity Sounding Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: A Portable Elf-Mt System For Shallow Resistivity Sounding Details Activities (0) Areas (0) Regions (0) Abstract: In view of recent extensive investigation of shallow resistivity structure for active fault studies and geothermal exploration, we developed a portable magnetotelluric (MT) system for the extremely low frequency (ELF) range. The system aims primarily at making real-time analyses of MT data at the so-called Schumann resonance frequencies of ~ 8, 14 and 20 Hz.

373

Atmospheric Carbon Dioxide Record from In Situ Measurements at Mt. Cimone  

NLE Websites -- All DOE Office Websites (Extended Search)

Mt. Cimone Mt. Cimone Atmospheric Carbon Dioxide Record from In Situ Measurements at Mt. Cimone graphics Graphics data Data Investigators Tiziano Colombo and Riccardo Santaguida Italian Meteorological Service, Via delle Ville, 100-41029 Sestola (MO), Italy Period of Record 1979-1997 Methods Continuous atmospheric CO2 measurements have been carried out at Mt. Cimone since 1979. Since December 1988, air samples have also been collected approximately once per week in a pair of 2-L, electropolished, stainless steel cylindrical flasks. From 1979 until December 1988, a Hartmann and Braun URAS-2T NDIR gas analyzer was used for CO2 determinations. Currently, CO2 determinations are made through the use of a Siemens Ultramat-5E NDIR gas analyzer. Water vapor is eliminated by passing the air through a U-tube

374

Rock Sampling At Mt Ranier Area (Frank, 1995) | Open Energy Information  

Open Energy Info (EERE)

Mt Ranier Area (Frank, 1995) Mt Ranier Area (Frank, 1995) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Rock Sampling At Mt Ranier Area (Frank, 1995) Exploration Activity Details Location Mt Ranier Area Exploration Technique Rock Sampling Activity Date Usefulness not indicated DOE-funding Unknown Notes This paper relies primarily on minerals, gases, and water found in surficial deposits to construct a conceptual model for Mount Rainier that considers the following factors: - Locations of hydrothermal leakage at the surface; - Structures that provide permeable paths of fluid egress to the surface; - Amount of excess heat discharge; - Composition of surficial thermal fluids; - Composition, guided by mineralogy, of subsurface thermal fluids. Analytical data used as a basis for the model are from samples

375

A Large Self-Potential Anomaly And Its Changes On The Quiet Mt Fuji, Japan  

Open Energy Info (EERE)

Self-Potential Anomaly And Its Changes On The Quiet Mt Fuji, Japan Self-Potential Anomaly And Its Changes On The Quiet Mt Fuji, Japan Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: A Large Self-Potential Anomaly And Its Changes On The Quiet Mt Fuji, Japan Details Activities (0) Areas (0) Regions (0) Abstract: Self-potential (SP) surveys were carried out on Mt. Fuji volcano, Japan, and an intense positive anomaly (about 2000 mV) was found in the summit area. The positive SP anomaly was stable on 2001 and 2002, but increased 150 mV in amplitude on September 12, 2003, and suddenly decreased 300 mV two weeks later. This amplitude change coincides with the emergence of the fumaroles, which appeared for the first time in 40 years, on the east-northeast flank 6 km apart from the summit. The SP anomaly is thought

376

GRR/Section 1-MT-a - Land Use Considerations | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 1-MT-a - Land Use Considerations GRR/Section 1-MT-a - Land Use Considerations < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 1-MT-a - Land Use Considerations 01MTALandUseConsiderations.pdf Click to View Fullscreen Triggers None specified Click "Edit With Form" above to add content 01MTALandUseConsiderations.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Add Text Print PDF Retrieved from "http://en.openei.org/w/index.php?title=GRR/Section_1-MT-a_-_Land_Use_Considerations&oldid=685537" Categories: Regulatory Roadmap State Sections Geothermal Regulatory Roadmap Sections

377

3-D Density Model Of Mt Etna Volcano (Southern Italy) | Open Energy  

Open Energy Info (EERE)

3-D Density Model Of Mt Etna Volcano (Southern Italy) 3-D Density Model Of Mt Etna Volcano (Southern Italy) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: 3-D Density Model Of Mt Etna Volcano (Southern Italy) Details Activities (0) Areas (0) Regions (0) Abstract: A detailed density model of Mt. Etna and its surrounding areas has been evaluated using a 3-D inversion of the gravimetric data acquired in the 1980's. Several high-density and low-density bodies are found, penetrating from shallow depths as far down as 12 km bsl. A positive correlation (in terms of location, extent, density, and velocity) is established between several anomalies of the density model and features identified in previously published seismic tomographies. A prominent high-density body extending down to 7 km bsl is recognized in the southern

378

Thermal And-Or Near Infrared At Mt Ranier Area (Frank, 1995) | Open Energy  

Open Energy Info (EERE)

Thermal And-Or Near Infrared At Mt Ranier Area Thermal And-Or Near Infrared At Mt Ranier Area (Frank, 1995) Exploration Activity Details Location Mt Ranier Area Exploration Technique Thermal And-Or Near Infrared Activity Date Usefulness useful DOE-funding Unknown Notes Infrared images acquired through joint US. Department of Energy and U.S. Geological Survey efforts (Kieffer et al., 1982) show a representative pattern of heat emission from the summit area (Fig. 5). References David Frank (1995) Surficial Extent And Conceptual Model Of Hydrothermal System At Mount Rainier, Washington Retrieved from "http://en.openei.org/w/index.php?title=Thermal_And-Or_Near_Infrared_At_Mt_Ranier_Area_(Frank,_1995)&oldid=386481" Categories: Exploration Activities DOE Funded Activities What links here Related changes

379

GRR/Section 6-MT-e - Floodplain Development Permit | Open Energy  

Open Energy Info (EERE)

6-MT-e - Floodplain Development Permit 6-MT-e - Floodplain Development Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 6-MT-e - Floodplain Development Permit 06MTEFloodplainDevelopmentPermit (1).pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Federal Emergency Management Agency Triggers None specified Click "Edit With Form" above to add content 06MTEFloodplainDevelopmentPermit (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Anyone planning new development within a designated Special Flood Hazard Areas (SFHA). Check with local floodplain [www.mtfloodplain.mt.gov

380

Missing Stratospheric Ozone Decrease at Southern Hemisphere Middle Latitudes after Mt. Pinatubo: A Dynamical Perspective  

Science Conference Proceedings (OSTI)

Although large total ozone decreases occurred in the Northern Hemisphere extratropics in the years after the volcanic eruption of Mt. Pinatubo that are generally attributed to the eruption, comparable decreases did not emerge in the Southern ...

C. Schnadt Poberaj; J. Staehelin; D. Brunner

2011-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

GRR/Section 6-MT-f - Short-term Water Quality Standard for Turbidity...  

Open Energy Info (EERE)

GRRSection 6-MT-f - Short-term Water Quality Standard for Turbidity (318 Authorization) < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home...

382

GRR/Section 14-MT-d - 401 Water Quality Certification | Open...  

Open Energy Info (EERE)

Page Edit with form History Facebook icon Twitter icon GRRSection 14-MT-d - 401 Water Quality Certification < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY...

383

Port of Morgan, MT Natural Gas Pipeline Exports to Canada (Million...  

Gasoline and Diesel Fuel Update (EIA)

Million Cubic Feet) Port of Morgan, MT Natural Gas Pipeline Exports to Canada (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9...

384

Port of Morgan, MT Natural Gas Pipeline Exports to Canada (Dollars...  

U.S. Energy Information Administration (EIA) Indexed Site

Dollars per Thousand Cubic Feet) Port of Morgan, MT Natural Gas Pipeline Exports to Canada (Dollars per Thousand Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6...

385

Metrics for Availability Analysis Using a Discrete Event Simulation Method  

Science Conference Proceedings (OSTI)

The system performance metric 'availability' is a central concept with respect to the concerns of a plant's operators and owners, yet it can be abstract enough to resist explanation at system levels. Hence, there is a need for a system-level metric more closely aligned with a plant's (or, more generally, a system's) raison d'etre. Historically, availability of repairable systems - intrinsic, operational, or otherwise - has been defined as a ratio of times. This paper introduces a new concept of availability, called endogenous availability, defined in terms of a ratio of quantities of product yield. Endogenous availability can be evaluated using a discrete event simulation analysis methodology. A simulation example shows that endogenous availability reduces to conventional availability in a simple series system with different processing rates and without intermediate storage capacity, but diverges from conventional availability when storage capacity is progressively increased. It is shown that conventional availability tends to be conservative when a design includes features, such as in - process storage, that partially decouple the components of a larger system.

Schryver, Jack C [ORNL; Nutaro, James J [ORNL; Haire, Marvin Jonathan [ORNL

2012-01-01T23:59:59.000Z

386

EAC Presentation: Metrics and Benefits Analysis for the ARRA Smart Grid  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Metrics and Benefits Analysis for the ARRA Smart Metrics and Benefits Analysis for the ARRA Smart Grid Programs - March 10, 2011 EAC Presentation: Metrics and Benefits Analysis for the ARRA Smart Grid Programs - March 10, 2011 PowerPoint presentation by Joe Paladino from the Office of Electricity Delivery and Energy Reliability before the Electricity Advisory Committee (EAC) on metrics and benefits analysis for the American Recovery and Reinvestment Act smart grid programs including the Smart Grid Investment Grants and the Smart Grid Demonstration Program. Metrics and Benefits Analysis for the ARRA Smart Grid Programs More Documents & Publications Electricity Advisory Committee Meeting Presentations June 2012 - Tuesday, June 12, 2012 Data Collection and Reporting for Metrics and Benefits: Smart Grid

387

Harmonizing Global Metrics for Data Center Energy Efficiency (February 2, 2010)  

NLE Websites -- All DOE Office Websites (Extended Search)

Harmonizing Global Metrics for Data Center Energy Efficiency Harmonizing Global Metrics for Data Center Energy Efficiency The United States of America, European Union and Japan Reach Agreement on Guiding Principles for Data Center Energy Efficiency Metrics February 2, 2010 As business demands and energy costs for data centers rise, owners and operators have focused on the energy efficiency of the data center as a whole, frequently using energy efficiency metrics. However, the metrics are not always applied clearly and consistently at a global level. To address these inconsistencies, a group of global leaders met on February 2, 2010 to agree on data center energy efficiency measurements, metrics, and reporting conventions. Organizations represented were the U.S. Department of Energy's Save Now and Federal Energy Management Programs,

388

EAC Presentation: Metrics and Benefits Analysis for the ARRA Smart Grid  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Metrics and Benefits Analysis for the ARRA Smart Metrics and Benefits Analysis for the ARRA Smart Grid Programs - March 10, 2011 EAC Presentation: Metrics and Benefits Analysis for the ARRA Smart Grid Programs - March 10, 2011 PowerPoint presentation by Joe Paladino from the Office of Electricity Delivery and Energy Reliability before the Electricity Advisory Committee (EAC) on metrics and benefits analysis for the American Recovery and Reinvestment Act smart grid programs including the Smart Grid Investment Grants and the Smart Grid Demonstration Program. Metrics and Benefits Analysis for the ARRA Smart Grid Programs More Documents & Publications Data Collection and Reporting for Metrics and Benefits: Smart Grid Investment Grant Program Electricity Advisory Committee Meeting Presentations June 2012 - Tuesday,

389

Conceptual Soundness, Metric Development, Benchmarking, and Targeting for PATH Subprogram Evaluation  

Science Conference Proceedings (OSTI)

The objective of this study is to evaluate the conceptual soundness of the U.S. Department of Housing and Urban Development (HUD) Partnership for Advancing Technology in Housing (PATH) program's revised goals and establish and apply a framework to identify and recommend metrics that are the most useful for measuring PATH's progress. This report provides an evaluative review of PATH's revised goals, outlines a structured method for identifying and selecting metrics, proposes metrics and benchmarks for a sampling of individual PATH programs, and discusses other metrics that potentially could be developed that may add value to the evaluation process. The framework and individual program metrics can be used for ongoing management improvement efforts and to inform broader program-level metrics for government reporting requirements.

Mosey. G.; Doris, E.; Coggeshall, C.; Antes, M.; Ruch, J.; Mortensen, J.

2009-01-01T23:59:59.000Z

390

Performance measures framework for unmanned systems (PerMFUS): models for contextual metrics  

Science Conference Proceedings (OSTI)

In the development of the Performance Measures Framework for Unmanned Systems (PerMFUS), we have established a multiple-axis performance metrics model for the unmanned systems (UMS). This model characterizes the UMS performance requirements by the missions ... Keywords: ALFUS, HSI, UMS, autonomy, collaboration, communication, contextual autonomy, contextual metrics, energy, environment, goal, human-system interaction, measure, metrics, mission, mobility, perception, performance, power, robot, sensing, task, terminology, test, unmanned system

Hui-Min Huang; Elena Messina; Adam Jacoff; Robert Wade; Michael McNair

2010-09-01T23:59:59.000Z

391

Office of HC Strategy Budget and Performance Metrics (HC-50) | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Strategy Budget and Strategy Budget and Performance Metrics (HC-50) Office of HC Strategy Budget and Performance Metrics (HC-50) Mission Statement and Function Statement The Office of Human Capital Strategy, Budget, and Performance Metrics provides strategic direction and advice to its stakeholders through the integration of budget analysis, workforce projections, and performance metrics in support of the goals and missions of the Department of Energy. Functions: Promotes business partnerships with Departmental elements to define and design HCM implementation strategies in alignment with Departmental mission, goals, and objectives. Provides strategic direction and advice through analysis of budget, workforce projections, and performance to respond to congressional mandates, administration goals, Departmental priorities and mission needs.

392

Building Cost and Performance Metrics: Data Collection Protocol, Revision 1.0  

SciTech Connect

This technical report describes the process for selecting and applying the building cost and performance metrics for measuring sustainably designed buildings in comparison to traditionally designed buildings.

Fowler, Kimberly M.; Solana, Amy E.; Spees, Kathleen L.

2005-09-29T23:59:59.000Z

393

Gauge invariant metric fluctuations in the early universe from STM theory of gravity: nonperturbative formalism  

E-Print Network (OSTI)

We develop a nonperturbative quantum field formalism to describe scalar gauge-invariant metric flucturations in the early universe from a 5D apparent (Ricci flat) vacuum.

Mariano Anabitarte; Mauricio Bellini

2007-05-23T23:59:59.000Z

394

Greenhouse Gas Return on Investment: A New Metric for Energy Technology  

E-Print Network (OSTI)

to decision making beyond energy technology. ACKNOWLEDGMENTSA New Metric for Energy Technology Corinne Reich-Weiser ,INTRODUCTION Alternative energy technologies such as solar,

Reich-Weiser, Corinne; Dornfeld, David; Horne, Steve

2008-01-01T23:59:59.000Z

395

TECHNICAL NOTE: ENERGY METRICS FOR CLEAN ENERGY MINISTERIAL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 10 TECHNICAL NOTE: ENERGY METRICS FOR CLEAN ENERGY MINISTERIAL INITIATIVES Global Efficiency Challenge End-use energy efficiency is a large and largely-untapped low-cost energy resource. The International Energy Agency's World Energy Outlook 2009 estimates (in their "450 Scenario") that cost-effective energy efficiency measures could reduce global annual primary energy demand by 14% and oil demand by 15% (about 5.5 billion barrels) below business-as-usual by 2030. These measures would require an average incremental investment of $185 billion/year over the next decade and $630 billion/year over 2021-2030, and have a net present value of $8.6 trillion at a 3% discount rate.

396

Meaningful Energy Efficiency Performance Metrics for the Process Industries  

E-Print Network (OSTI)

An effective energy performance benchmarking should include a consideration of production rate, product specifications, feedstock mix, and process type, in addition to thermodynamics and economics. Unfortunately, there is no accepted industry standard for developing Energy Efficiency (EE) performance metrics for the chemical process industries, and published literature on the subject is extremely sparse. This paper will present a comprehensive system of EPIs as applied in a complex multi-product multi-plant organization in the oil and gas industry. Four categories of EPIs are recommended: • By equipment • By process unit • By product • By business unit. It will be shown how each type of EPI fulfills a specific business objective in the organization. Successes and failures are described, and recommendations are provided. The principles and practices outlined in this paper are generally applicable, and will hopefully lead to a standard methodology for EE performance reporting.

Kumana, J. D.; Sidhwa, N. R.

2009-05-01T23:59:59.000Z

397

Context-based metrics for evaluating changes to web pages  

E-Print Network (OSTI)

The web provides a lot of fluid information but this information changes, moves, and even disappears over time. Bookmark lists, portals, and paths are collections where the building blocks are web pages, which are susceptible to these changes. A lot of research, both in industry and in academia, focuses on organizing this vast amount of data. In this thesis, I present context-based algorithms for measuring changes to a document. The methods proposed use other documents in a collection as the context for evaluating changes in the web pages. These metrics will be used in maintaining paths as the individual pages in paths change. This approach will enhance the evaluations of change made by the currently existing Path Manager, in the Walden's Paths project that is being developed in the Center for the Study of Digital Libraries at Texas A&M University.

Dash, Suvendu Kumar

2003-12-01T23:59:59.000Z

398

Metric deformation and boundary value problems in 3D  

E-Print Network (OSTI)

A novel perturbative method, proposed by Panda {\\it et al.} [1] to solve the Helmholtz equation in two dimensions, is extended to three dimensions for general boundary surfaces. Although a few numerical works are available in the literature for specific domains in three dimensions such a general analytical prescription is presented for the first time. An appropriate transformation is used to get rid of the asymmetries in the domain boundary by mapping the boundary into an equivalent sphere with a deformed interior metric. The deformed metric produces new source terms in the original homogeneous equation. A deformation parameter measuring the deviation of the boundary from a spherical one is introduced as a perturbative parameter. With the help of standard Rayleigh-Schr{\\"o}dinger perturbative technique the transformed equation is solved and the general solution is written down in a closed form at each order of perturbation. The solutions are boundary condition free and which make them widely applicable for various situations. Once the boundary conditions are applied to these general solutions the eigenvalues and the wavefunctions are obtained order by order. The efficacy of the method has been tested by comparing the analytic values against the numerical ones for three dimensional enclosures of various shapes. The method seems to work quite well for these shapes for both, Dirichlet as well as Neumann boundary conditions. The usage of spherical harmonics to express the asymmetries in the boundary surfaces helps us to consider a wide class of domains in three dimensions and also their fast convergence guarantees the convergence of the perturbative series for the energy. Direct applications of this method can be found in the field of quantum dots, nuclear physics, acoustical and electromagnetic cavities.

Subhasis Panda; S. Pratik Khastgir

2013-07-24T23:59:59.000Z

399

Metrics for Assessment of Smart Grid Data Integrity Attacks  

Science Conference Proceedings (OSTI)

There is an emerging consensus that the nation’s electricity grid is vulnerable to cyber attacks. This vulnerability arises from the increasing reliance on using remote measurements, transmitting them over legacy data networks to system operators who make critical decisions based on available data. Data integrity attacks are a class of cyber attacks that involve a compromise of information that is processed by the grid operator. This information can include meter readings of injected power at remote generators, power flows on transmission lines, and relay states. These data integrity attacks have consequences only when the system operator responds to compromised data by redispatching generation under normal or contingency protocols. These consequences include (a) financial losses from sub-optimal economic dispatch to service loads, (b) robustness/resiliency losses from placing the grid at operating points that are at greater risk from contingencies, and (c) systemic losses resulting from cascading failures induced by poor operational choices. This paper is focused on understanding the connections between grid operational procedures and cyber attacks. We first offer two examples to illustrate how data integrity attacks can cause economic and physical damage by misleading operators into taking inappropriate decisions. We then focus on unobservable data integrity attacks involving power meter data. These are coordinated attacks where the compromised data are consistent with the physics of power flow, and are therefore passed by any bad data detection algorithm. We develop metrics to assess the economic impact of these attacks under re-dispatch decisions using optimal power flow methods. These metrics can be use to prioritize the adoption of appropriate countermeasures including PMU placement, encryption, hardware upgrades, and advance attack detection algorithms.

Annarita Giani; Miles McQueen; Russell Bent; Kameshwar Poolla; Mark Hinrichs

2012-07-01T23:59:59.000Z

400

A nuclear criticality safety assessment of the loss of moderation control in 2 1/2 and 10-ton cylinders containing enriched UF sub 6  

Science Conference Proceedings (OSTI)

Moderation control for maintaining nuclear criticality safety in 2-1/2-ton, 10-ton, and 14-ton cylinders containing enriched uranium hexafluoride (UF{sub 6}) has been used safely within the nuclear industry for over thirty years, and is dependent on cylinder integrity and containment. This assessment evaluates the loss of moderation control by the breaching of containment and entry of water into the cylinders. The first objective of this study was to estimate the required amounts of water entering these large UF{sub 6} cylinders to react with, and to moderate the uranium compounds sufficiently to cause criticality. Hypothetical accident situations were modeled as a uranyl fluoride (UO{sub 2}F{sub 2}) slab above a UF{sub 6} hemicylinder, and a UO{sub 2} sphere centered within a UF{sub 6} hemicylinder. These situations were investigated by computational analyses utilizing the KENO V.a Monte Carlo Computer Code. The results were used to estimate both the masses of water required for criticality, and the limiting masses of water that could be considered safe. The second objective of the assessment was to calculate the time available for emergency control actions before a criticality would occur, i.e., a safetime,'' for various sources of water and different size openings in a breached cylinder. In the situations considered, except the case for a fire hose, the safetime appears adequate for emergency control actions. The assessment shows that current practices for handling moderation controlled cylinders of low enriched UF{sub 6}, along with the continuation of established personnel training programs, ensure nuclear criticality safety for routine and emergency operations. 2 refs., 5 figs., 1 tab.

Newvahner, R.L. (Portsmouth Gaseous Diffusion Plant, OH (United States)); Pryor, W.A. (PAI Corp., Oak Ridge, TN (United States))

1991-08-16T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Investigations on catalyzed steam gasification of biomass: feasibility study of methane production via catalytic gasification of 200 tons of wood per day  

DOE Green Energy (OSTI)

This report is a result of an additional study made of the economic feasibility of producing substitute natural gas (SNG) from wood via catalytic gasification with steam. The report has as its basis the original 2000 tons of wood per day study generated from process development unit testing performed by the Pacific Northwest Laboratory. The goal of this additional work was to determine the feasibility of a smaller scale plant one-tenth the size of the original or 200 tons of dry wood feed per day. Plant production based on this wood feed is 2.16 MM Scfd of SNG with a HHV of 956 Btu per Scf. All process and support facilities necessary to convert wood to SNG are included in this study. The plant location is Newport, Oregon. The capital cost for the plant is $26,680,000 - September 1980 basis. Gas production costs which allow for return on capital have been calculated for various wood prices for both utility and private investor financing. These wood prices represent the cost of unchipped wood delivered to the plant site. For utility financing, the gas production costs are, respectively, $14.34, $14.83, $15.86, and $17.84 per MM Btu for wood costs of $5, $10, $20, and $40 per dry ton. For private investor financing, the corresponding product costs are $18.76, $19.26, $20.28, and $22.31 per MM Btu for the corresponding wood costs. The costs calculated by the utility financing method includes a return on equity of 15% and an interest rate of 10% on the debt. The private investor financing method, which is 100% equity financing, incorporates a discounted cash flow (DCF) return on equity of 12%. The thermal efficiency without taking an energy credit for char is 57.4%.

Mudge, L.K.; Weber, S.L.; Mitchell, D.H.; Sealock, L.J. Jr.; Robertus, R.J.

1981-01-01T23:59:59.000Z

402

Authorized Limits for the Release of a 25 Ton Locomotive, Serial Number 21547, at the Area 25 Engine Maintenance, Assembly, and Disassembly Facility, Nevada Test Site, Nevada  

SciTech Connect

This document contains process knowledge and radiological data and analysis to support approval for release of the 25-ton locomotive, Serial Number 21547, at the Area 25 Engine Maintenance, Assembly, and Disassembly (EMAD) Facility, located on the Nevada Test Site (NTS). The 25-ton locomotive is a small, one-of-a-kind locomotive used to move railcars in support of the Nuclear Engine for Rocket Vehicle Application project. This locomotive was identified as having significant historical value by the Nevada State Railroad Museum in Boulder City, Nevada, where it will be used as a display piece. A substantial effort to characterize the radiological conditions of the locomotive was undertaken by the NTS Management and Operations Contractor, National Security Technologies, LLC (NSTec). During this characterization process, seven small areas on the locomotive had contamination levels that exceeded the NTS release criteria (limits consistent with U.S. Department of Energy [DOE] Order DOE O 5400.5, “Radiation Protection of the Public and the Environment”). The decision was made to perform radiological decontamination of these known accessible impacted areas to further the release process. On February 9, 2010, NSTec personnel completed decontamination of these seven areas to within the NTS release criteria. Although all accessible areas of the locomotive had been successfully decontaminated to within NTS release criteria, it was plausible that inaccessible areas of the locomotive (i.e., those areas on the locomotive where it was not possible to perform radiological surveys) could potentially have contamination above unrestricted release limits. To access the majority of these inaccessible areas, the locomotive would have to be disassembled. A complete disassembly for a full radiological survey could have permanently destroyed parts and would have ruined the historical value of the locomotive. Complete disassembly would also add an unreasonable financial burden for the contractor. A decision was reached between the NTS regulator and NSTec, opting for alternative authorized limits from DOE Headquarters. In doing so, NSTec personnel performed a dose model using the DOE-approved modeling code RESRAD-BUILD v3.5 to evaluate scenarios. The parameters used in the dose model were conservative. NSTec’s Radiological Engineering Calculation, REC-2010-001, “Public Dose Estimate from the EMAD 25 Ton Locomotive,” concluded that the four scenarios evaluated were below the 25-millirem per year limit, the “likely” dose scenarios met the “few millirem in a year” criteria, and that the EMAD 25-ton locomotive met the radiological requirements to be released with residual radioactivity to the public.

Jeremy Gwin and Douglas Frenette

2010-04-08T23:59:59.000Z

403

SOLERAS - Solar Cooling Engineering Field Tests Project: Arizona State University. Prototype carrier 10 ton air-cooled solar absorption chiller. Final evaluation report  

DOE Green Energy (OSTI)

A prototype air-cooled 10 ton solar absorption chiller was disassembled and inspected after having been field-tested for three consecutive cooling seasons. Included in the inspection were some flow visualization experiments which revealed some problems in the absorber header design. The objectives of this evaluation project were to determine possible causes for the frequent crystallization and generally below-design performance of the chiller during the testing period. The major conclusions reached were that a combination of leaks and of poor (50%) flow distribution in the absorber could account for most of the chiller's poor performance.

Not Available

1982-01-01T23:59:59.000Z

404

Monitoring and Targeting (M&T): A Low Investment, Low Risk Approach to Energy Cost Savings  

E-Print Network (OSTI)

Monitoring and Targeting (M&T) is a disciplined approach to energy management that ensures that energy resources are used to their maximum economic advantage. M&T serves two principal functions: • Ongoing, day-to-day control of energy use • Planned improvements in energy efficiency Key elements of an M&T program include: • Measurement of utility (steam, fuel, power) consumption levels • The establishment of consumption targets that take variations in key variables (e.g., throughput, conversion, product quality...etc.) into account • Comparison of actual vs. target energy usage • "Exception reports" to highlight areas experiencing unusually good or unusually poor performance • An established protocol, involving both management and operating personnel, for reviewing and acting upon the energy information available. • Tracking and reporting of the savings achieved • Periodic review and reassessment of the energy targets. This paper briefly reviews key M&T concepts and their application in industrial settings. Practical aspects of program implementation -such as data entry, target setting, report generation, software requirements, and personnel orientation and training -are discussed. Representative savings produced by M&T in a variety of plant types also are presented. These savings typically are achieved with little or no capital investment.

McMullan, A.; Rutkowski, M.; Karp, A.

2001-05-01T23:59:59.000Z

405

A mapping study to investigate component-based software system metrics  

Science Conference Proceedings (OSTI)

A component-based software system (CBSS) is a software system that is developed by integrating components that have been deployed independently. In the last few years, many researchers have proposed metrics to evaluate CBSS attributes. However, the practical ... Keywords: Component-based software system, Software components, Software metrics, Software quality, Systematic mapping study

Majdi Abdellatief; Abu Bakar Md Sultan; Abdul Azim Abdul Ghani; Marzanah A. Jabar

2013-03-01T23:59:59.000Z

406

Solving similarity joins and range queries in metric spaces with the list of twin clusters  

Science Conference Proceedings (OSTI)

The metric space model abstracts many proximity or similarity problems, where the most frequently considered primitives are range and k-nearest neighbor search, leaving out the similarity join, an extremely important primitive. In fact, despite the great ... Keywords: General metric spaces, Indexing methods, Similarity joins

Rodrigo Paredes; Nora Reyes

2009-03-01T23:59:59.000Z

407

CM-tree: A dynamic clustered index for similarity search in metric databases  

Science Conference Proceedings (OSTI)

Repositories of unstructured data types, such as free text, images, audio and video, have been recently emerging in various fields. A general searching approach for such data types is that of similarity search, where the search is for similar objects ... Keywords: Clustering methods, Database indexing, Metric access methods, Metric spaces, Similarity search

Lior Aronovich; Israel Spiegler

2007-12-01T23:59:59.000Z

408

Toward alternative metrics of journal impact: a comparison of download and citation data  

Science Conference Proceedings (OSTI)

We generated networks of journal relationships from citation and download data, and determined journal impact rankings from these networks using a set of social network centrality metrics. The resulting journal impact rankings were compared to the ISI ... Keywords: digital libraries, impact metrics, journal impact ranking, social network analysis, usage analysis

Johan Bollen; Herbert Van de Sompel; Joan A. Smith; Rick Luce

2005-12-01T23:59:59.000Z

409

Toward alternative metrics of journal impact: A comparison of download and citation data  

Science Conference Proceedings (OSTI)

We generated networks of journal relationships from citation and download data, and determined journal impact rankings from these networks using a set of social network centrality metrics. The resulting journal impact rankings were compared to the ISI ... Keywords: Digital libraries, Impact metrics, Journal impact ranking, Social network analysis, Usage analysis

Johan Bollen; Herbert Van de Sompel; Joan A. Smith; Rick Luce

2005-12-01T23:59:59.000Z

410

New measurements reveal weaknesses of image quality metrics in evaluating graphics artifacts  

Science Conference Proceedings (OSTI)

Reliable detection of global illumination and rendering artifacts in the form of localized distortion maps is important for many graphics applications. Although many quality metrics have been developed for this task, they are often tuned for compression/transmission ... Keywords: global illumination, image quality metrics (IQM), noticeable and objectionable distortions, perceptual experiments

Martin ?adík; Robert Herzog; Rafa? Mantiuk; Karol Myszkowski; Hans-Peter Seidel

2012-11-01T23:59:59.000Z

411

Deep and wide metrics for HPC resource capability and project usage  

Science Conference Proceedings (OSTI)

This paper defines and demonstrates application of possible quantitative metrics for the qualitative notions of "deep" and "wide" HPC system use along with the related concepts of capability and capacity computing. By summarizing HPC workloads according ... Keywords: TeraGrid, capability, capacity, deep, high-performance computing, measurement, metrics, wide

David Hart

2011-11-01T23:59:59.000Z

412

On improving temporal and spatial mobility metrics for wireless ad hoc networks  

Science Conference Proceedings (OSTI)

This work shows that two well-known spatial and temporal mobility metrics for wireless multi-hop networks have limitations, possibly resulting in misleading results. Based on the concept of spatial dependence among nodes including transient periods of ... Keywords: Mobile ad hoc network, Mobility metric, Mobility model, Network simulation, Spatial dependence, Temporal dependence

Elmano Ramalho Cavalcanti; Marco Aurélio Spohn

2012-04-01T23:59:59.000Z

413

Review of performance metrics for green data centers: a taxonomy study  

Science Conference Proceedings (OSTI)

Data centers now play an important role in modern IT infrastructures. Although much research effort has been made in the field of green data center computing, performance metrics for green data centers have been left ignored. This paper is devoted to ... Keywords: Data center, Green computing, Performance metrics

Lizhe Wang; Samee U. Khan

2013-03-01T23:59:59.000Z

414

MEASURING THE IMPACT OF ADDITIONAL RAIL TRAFFIC USING HIGHWAY & RAILROAD METRICS  

E-Print Network (OSTI)

are then illustrated by simulating shared corridor operations with freight and passenger trains. TRANSPORTATION METRICS1 MEASURING THE IMPACT OF ADDITIONAL RAIL TRAFFIC USING HIGHWAY & RAILROAD METRICS Samuel L. Sogin of Illinois Urbana, IL, USA ABSTRACT Long term demand for freight movements in North America is expected

Barkan, Christopher P.L.

415

Faithful transformation of quasi-isotropic to Weyl-Papapetrou coordinates: A prerequisite to compare metrics  

E-Print Network (OSTI)

We demonstrate how one should transform correctly quasi-isotropic coordinates to Weyl-Papapetrou coordinates in order to compare the metric around a rotating star that has been constructed numerically in the former coordinates with an axially symmetric stationary metric that is given through an analytical form in the latter coordinates. Since a stationary metric associated with an isolated object that is built numerically partly refers to a non-vacuum solution (interior of the star) the transformation of its coordinates to Weyl-Papapetrou coordinates, which are usually used to describe vacuum axisymmetric and stationary solutions of Einstein equations, is not straightforward in the non-vacuum region. If this point is \\textit{not} taken into consideration, one may end up to erroneous conclusions about how well a specific analytical metric matches the metric around the star, due to fallacious coordinate transformations.

G. Pappas; T. A. Apostolatos

2008-03-05T23:59:59.000Z

416

Impact of Different Economic Performance Metrics on the Perceived Value of Solar Photovoltaics  

DOE Green Energy (OSTI)

Photovoltaic (PV) systems are installed by several types of market participants, ranging from residential customers to large-scale project developers and utilities. Each type of market participant frequently uses a different economic performance metric to characterize PV value because they are looking for different types of returns from a PV investment. This report finds that different economic performance metrics frequently show different price thresholds for when a PV investment becomes profitable or attractive. Several project parameters, such as financing terms, can have a significant impact on some metrics [e.g., internal rate of return (IRR), net present value (NPV), and benefit-to-cost (B/C) ratio] while having a minimal impact on other metrics (e.g., simple payback time). As such, the choice of economic performance metric by different customer types can significantly shape each customer's perception of PV investment value and ultimately their adoption decision.

Drury, E.; Denholm, P.; Margolis, R.

2011-10-01T23:59:59.000Z

417

Understanding Motivations for Facebook Use: Usage Metrics, Network Structure, and Privacy  

E-Print Network (OSTI)

This study explores the links between motives for using a social network service and numerical measures of that activity. Specifically, it identified motives for Facebook use by employing a Uses and Gratifications (U&G) approach and then investigated the extent to which these motives can be predicted through usage and network metrics collected automatically via the Facebook API. In total, 11 Facebook usage metrics and eight personal network metrics served as predictors. Results showed that all three variable types in this expanded U&G frame of analysis (covering social antecedents, usage metrics, and personal network metrics) effectively predicted motives and highlighted interesting behaviors. To further illustrate the power of this framework, the intricate nature of privacy in social media was explored and relationships drawn between privacy attitudes (and acts) and measures of use and network structure. Author Keywords Uses and gratifications; social network sites; social networks; Facebook; privacy; computer-mediated communication.

Tasos Spiliotopoulos; Ian Oakley

2013-01-01T23:59:59.000Z

418

GRR/Section 6-MT-a - Montana Overdimensional or Overweight Load Permit |  

Open Energy Info (EERE)

GRR/Section 6-MT-a - Montana Overdimensional or Overweight Load Permit GRR/Section 6-MT-a - Montana Overdimensional or Overweight Load Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 6-MT-a - Montana Overdimensional or Overweight Load Permit 06MTAMontanaOverdimensionalOrOverweightLoadPermit (1).pdf Click to View Fullscreen Contact Agencies Montana Department of Transportation Regulations & Policies Montana Code Annotated 61-10-101 et seq. Administrative Rules of Monatana 18.8 Triggers None specified Click "Edit With Form" above to add content 06MTAMontanaOverdimensionalOrOverweightLoadPermit (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

419

Controlled Source Audio MT At Cove Fort Area - Liquid (Combs 2006) | Open  

Open Energy Info (EERE)

Cove Fort Area - Liquid (Combs 2006) Cove Fort Area - Liquid (Combs 2006) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Controlled Source Audio MT At Cove Fort Area (Combs 2006) Exploration Activity Details Location Cove Fort Geothermal Area Exploration Technique Controlled Source Audio MT Activity Date Usefulness not indicated DOE-funding Unknown Notes "SP, dipole-dipole resistivity, CSAMT; sufficient electrical data are available. Reservoir model?" References Jim Combs (1 January 2006) Historical Exploration And Drilling Data From Geothermal Prospects And Power Generation Projects In The Western United States Retrieved from "http://en.openei.org/w/index.php?title=Controlled_Source_Audio_MT_At_Cove_Fort_Area_-_Liquid_(Combs_2006)&oldid=598122"

420

GRR/Section 3-MT-e - Encroachment Permit | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 3-MT-e - Encroachment Permit GRR/Section 3-MT-e - Encroachment Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 3-MT-e - Encroachment Permit 03MTEEncroachmentPermit.pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Montana Department of Transportation Triggers None specified Click "Edit With Form" above to add content 03MTEEncroachmentPermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative This flowchart is intended to address the permitting requirements for encroachments on Montana Department of Transportation lands.

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

GRR/Section 18-MT-a - Underground Storage Tanks | Open Energy Information  

Open Energy Info (EERE)

MT-a - Underground Storage Tanks MT-a - Underground Storage Tanks < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 18-MT-a - Underground Storage Tanks 18MTAUndergroundStorageTanks (2).pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Regulations & Policies Montana Code Annotated 75-11-501 Administrative Rules of Montana 17-56 Triggers None specified Click "Edit With Form" above to add content 18MTAUndergroundStorageTanks (2).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative A developer must obtain an Underground Storage Tank Installation Permit

422

GRR/Section 14-MT-a - Nonpoint Source Pollution | Open Energy Information  

Open Energy Info (EERE)

MT-a - Nonpoint Source Pollution MT-a - Nonpoint Source Pollution < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-MT-a - Nonpoint Source Pollution 14MTANonpointSourcePollution (1).pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Montana Watershed Coordination Council United States Environmental Protection Agency Regulations & Policies Clean Water Act Triggers None specified Click "Edit With Form" above to add content 14MTANonpointSourcePollution (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Nonpoint source (NPS) pollution is the state's single largest source of

423

GRR/Section 14-MT-d - Section 401 Water Quality Certification | Open Energy  

Open Energy Info (EERE)

GRR/Section 14-MT-d - Section 401 Water Quality Certification GRR/Section 14-MT-d - Section 401 Water Quality Certification < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-MT-d - Section 401 Water Quality Certification 14MTD401WaterQualityCertification (2).pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Regulations & Policies Federal Clean Water Act (33 USC § 1251 et seq.) Montana Codes Annotated 75-5-401 Aministrative Rules of Montana Chapter 30 Administrative Rules of Montana 17.30.101 through 109 Triggers None specified Click "Edit With Form" above to add content 14MTD401WaterQualityCertification (2).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

424

Water Sampling At Mt St Helens Area (Shevenell & Goff, 1995) | Open Energy  

Open Energy Info (EERE)

Helens Area (Shevenell & Goff, 1995) Helens Area (Shevenell & Goff, 1995) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Mt St Helens Area (Shevenell & Goff, 1995) Exploration Activity Details Location Mt St Helens Area Exploration Technique Water Sampling Activity Date Usefulness not indicated DOE-funding Unknown References Lisa Shevenell, Fraser Goff (1995) Evolution Of Hydrothermal Waters At Mount St Helens, Washington, Usa Retrieved from "http://en.openei.org/w/index.php?title=Water_Sampling_At_Mt_St_Helens_Area_(Shevenell_%26_Goff,_1995)&oldid=389549" Category: Exploration Activities What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

425

Water Sampling At Mt Ranier Area (Frank, 1995) | Open Energy Information  

Open Energy Info (EERE)

Water Sampling At Mt Rainier Area (Frank, 1995) Water Sampling At Mt Rainier Area (Frank, 1995) Exploration Activity Details Location Mt Rainier Area Exploration Technique Water Sampling Activity Date Usefulness not indicated DOE-funding Unknown Notes This paper relies primarily on minerals, gases, and water found in surficial deposits to construct a conceptual model for Mount Rainier that considers the following factors: - Locations of hydrothermal leakage at the surface; - Structures that provide permeable paths of fluid egress to the surface; - Amount of excess heat discharge; - Composition of surficial thermal fluids; - Composition, guided by mineralogy, of subsurface thermal fluids. Analytical data used as a basis for the model are from samples collected during field investigations in 1982-1985 (Frank, 1985), whereas

426

GRR/Section 6-MT-f - Short-term Water Quality Standard for Turbidity (318  

Open Energy Info (EERE)

GRR/Section 6-MT-f - Short-term Water Quality Standard for Turbidity (318 GRR/Section 6-MT-f - Short-term Water Quality Standard for Turbidity (318 Authorization) < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 6-MT-f - Short-term Water Quality Standard for Turbidity (318 Authorization) 06MTFShortTermWaterQualityStandardForTurbidity318Authorization.pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Montana Department of Environmental Quality Montana Fish, Wildlife & Parks Regulations & Policies MCA 75-5-318 Triggers None specified Click "Edit With Form" above to add content 06MTFShortTermWaterQualityStandardForTurbidity318Authorization.pdf Error creating thumbnail: Page number not in range.

427

GRR/Section 6-MT-d - Other Overview | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 6-MT-d - Other Overview GRR/Section 6-MT-d - Other Overview < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 6-MT-d - Other Overview 06MTDOtherOverview.pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Montana Department of Environmental Quality Montana Fish, Wildlife & Parks Triggers None specified Click "Edit With Form" above to add content 06MTDOtherOverview.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative This overview is intended to direct the developer to additional construction permits. For projects intended near waterways, Montana also provides a joint

428

GRR/Section 3-MT-f - Right-of-Way Easement for Utilities | Open Energy  

Open Energy Info (EERE)

3-MT-f - Right-of-Way Easement for Utilities 3-MT-f - Right-of-Way Easement for Utilities < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 3-MT-f - Right-of-Way Easement for Utilities 03MTFRightOfWayEasementForUtilitiesProcess.pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Montana State Historic Preservation Office Triggers None specified Click "Edit With Form" above to add content 03MTFRightOfWayEasementForUtilitiesProcess.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative This flowchart is intended to describe the process for obtaining an

429

GRR/Section 4-MT-a - State Exploration Process | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 4-MT-a - State Exploration Process GRR/Section 4-MT-a - State Exploration Process < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 4-MT-a - State Exploration Process 04MTAStateExplorationProcess (1).pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Montana Board of Oil and Gas Conservation Regulations & Policies ARM 17.20.202: Geothermal Exploration Plan ARM 17.20.203: Initial Field Report ARM 17.20.204: Periodic Field Report ARM 17.20.205: Final Field Report ARM 17.20.206: Geological Report MCA 82-1-103: Notice of Intent MCA 82-1-104: Bond MCA 82-1-105: Permit Issuance MCA 82-1-106: NOI Forwarded MCA 82-1-107: Notice to Surface Owner MCA 82-1-108: Record of Work Performed Triggers

430

GRR/Section 14-MT-b - MPDES Permitting Process | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 14-MT-b - MPDES Permitting Process GRR/Section 14-MT-b - MPDES Permitting Process < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-MT-b - MPDES Permitting Process 14MTBMPDESPermittingProcess.pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality United States Environmental Protection Agency Regulations & Policies MCA 75-5-402: Duties of MDEQ MCA 75-5-403: Denial, Modification, Review 75-5-611: Violation, Hearing Triggers None specified Click "Edit With Form" above to add content 14MTBMPDESPermittingProcess.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative

431

Direct-Current Resistivity Survey At Mt Princeton Hot Springs Area  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Direct-Current Resistivity Survey At Mt Princeton Hot Springs Area (Richards, Et Al., 2010) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current Resistivity Survey At Mt Princeton Hot Springs Area (Richards, Et Al., 2010) Exploration Activity Details Location Mt Princeton Hot Springs Area Exploration Technique Direct-Current Resistivity Survey Activity Date Usefulness useful DOE-funding Unknown Notes Used to map fracture and fluid flow patterns. References K. Richards, A. Revil, A. Jardani, F. Henderson, M. Batzle, A. Haas (2010) Pattern Of Shallow Ground Water Flow At Mount Princeton Hot Springs,

432

GRR/Section 14-MT-e - Groundwater Pollution Control System | Open Energy  

Open Energy Info (EERE)

MT-e - Groundwater Pollution Control System MT-e - Groundwater Pollution Control System < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-MT-e - Groundwater Pollution Control System 14MTEGroundwaterPollutionControlSystemPermit (1).pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Regulations & Policies Water Quality Act (Montana Codes Annotated 75-5-101 et seq.) Administrative Rules of Montana 17.30.1001 et seq. Triggers None specified Click "Edit With Form" above to add content 14MTEGroundwaterPollutionControlSystemPermit (1).pdf 14MTEGroundwaterPollutionControlSystemPermit (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

433

GRR/Section 20-MT-a - Well Abandonment Process | Open Energy Information  

Open Energy Info (EERE)

20-MT-a - Well Abandonment Process 20-MT-a - Well Abandonment Process < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 20-MT-a - Well Abandonment Process 20MTAWellAbandonmentProcess.pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Regulations & Policies Rule 36.21.671 - Abandonment of Flowing Wells Rule 36.21.810 - Abandonment Rule Chapter 36.21 Board of Water Well Contractors Triggers None specified Click "Edit With Form" above to add content 20MTAWellAbandonmentProcess.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Montana requires the employment of particular engineering standards when

434

Geothermal Literature Review At Mt Ranier Area (Frank, 1995) | Open Energy  

Open Energy Info (EERE)

Geothermal Literature Review At Mt Rainier Area Geothermal Literature Review At Mt Rainier Area (Frank, 1995) Exploration Activity Details Location Mt Rainier Area Exploration Technique Geothermal Literature Review Activity Date Usefulness not indicated DOE-funding Unknown Notes This paper relies primarily on minerals, gases, and water found in surficial deposits to construct a conceptual model for Mount Rainier that considers the following factors: - Locations of hydrothermal leakage at the surface; - Structures that provide permeable paths of fluid egress to the surface; - Amount of excess heat discharge; - Composition of surficial thermal fluids; - Composition, guided by mineralogy, of subsurface thermal fluids. Analytical data used as a basis for the model are from samples collected during field investigations in 1982-1985 (Frank, 1985), whereas

435

GRR/Section 17-MT-b - Montana Stream Protection Act (SPA 124 Permit) | Open  

Open Energy Info (EERE)

GRR/Section 17-MT-b - Montana Stream Protection Act (SPA 124 Permit) GRR/Section 17-MT-b - Montana Stream Protection Act (SPA 124 Permit) < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 17-MT-b - Montana Stream Protection Act (SPA 124 Permit) 17MTBMontanaStreamProtectionActSPA124Permit.pdf Click to View Fullscreen Contact Agencies Montana Fish, Wildlife & Parks Regulations & Policies MCA 87-5-501 et seq Montana Stream Protection Triggers None specified Click "Edit With Form" above to add content 17MTBMontanaStreamProtectionActSPA124Permit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Montana has a policy to preserve fish and wildlife habitat as well as

436

GRR/Section 18-MT-b - Hazardous Waste Facility Permit | Open Energy  

Open Energy Info (EERE)

GRR/Section 18-MT-b - Hazardous Waste Facility Permit GRR/Section 18-MT-b - Hazardous Waste Facility Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 18-MT-b - Hazardous Waste Facility Permit 18MTBHazardousWasteFacilityPermit.pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Regulations & Policies Montana Code Annotated Title 75, Chapter 10, Part 4 Administrative Rules of Montana Title 17, Chapter 53 40 CFR 260 through 40 CFR 270 40 CFR 124 Triggers None specified Click "Edit With Form" above to add content 18MTBHazardousWasteFacilityPermit.pdf 18MTBHazardousWasteFacilityPermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

437

GRR/Section 8-MT-a - Transmission Siting Process | Open Energy Information  

Open Energy Info (EERE)

8-MT-a - Transmission Siting Process 8-MT-a - Transmission Siting Process < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 8-MT-a - Transmission Siting Process 08MTATransmission (3).pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Regulations & Policies Montana Code Annotated Title 75, Chapter 20 Montana Environmental Policy Act MCA 75-20-301 Findings Necessary for Certification ARM 17.20.1606 Electric Transmission Lines, Need Standard ARM 17.20.907 ARM 17.20.920 ARM 17.20.921 ARM 17.20.923 ARM 17.20.1902 Triggers None specified Click "Edit With Form" above to add content 08MTATransmission (3).pdf 08MTATransmission (3).pdf Error creating thumbnail: Page number not in range.

438

GRR/Section 15-MT-a - Air Quality Permit | Open Energy Information  

Open Energy Info (EERE)

GRR/Section 15-MT-a - Air Quality Permit GRR/Section 15-MT-a - Air Quality Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 15-MT-a - Air Quality Permit 15MTAAirQualityPermit (1).pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Regulations & Policies Montana Code Annotated 75-2 Administrative Rules of Montana 17.8 Triggers None specified Click "Edit With Form" above to add content 15MTAAirQualityPermit (1).pdf 15MTAAirQualityPermit (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative The Montana Department of Environmental Quality (DEQ) requires a Montana Air Permit to construct and operate a new or modified source of air

439

GRR/Section 3-MT-a - State Geothermal Resource Lease | Open Energy  

Open Energy Info (EERE)

3-MT-a - State Geothermal Resource Lease 3-MT-a - State Geothermal Resource Lease < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 3-MT-a - State Geothermal Resource Lease 03MTAStateGeothermalResourceLease.pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Regulations & Policies Rule 36.25.404 Triggers None specified Click "Edit With Form" above to add content 03MTAStateGeothermalResourceLease.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative This flowchart is intended to document the process behind the geothermal resource lease in Montana. The procedure is outlined in Rule 36.25.404.

440

GRR/Section 5-MT-a - Drilling and Well Development | Open Energy  

Open Energy Info (EERE)

GRR/Section 5-MT-a - Drilling and Well Development GRR/Section 5-MT-a - Drilling and Well Development < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 5-MT-a - Drilling and Well Development 05MTADrillingAndWellDevelopment (1).pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Montana Department of Environmental Quality Regulations & Policies MCA 37-43-104: Monitoring Wells MCA 37-43-302: License Requirements MCA 37-43-306: Bonding Requirements Triggers None specified Click "Edit With Form" above to add content 05MTADrillingAndWellDevelopment (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

RECIPIENT:MT DEQ u.s. DEPARTMENT OF ENERGY EERE PROJECT MANAGEMENT CENTER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MT DEQ MT DEQ u.s. DEPARTMENT OF ENERGY EERE PROJECT MANAGEMENT CENTER NEPA DETERlVIINATION PROJECT TITLE: Montana FormauJ SEP Page 1 of2 STATE: MT Funding Opportunity Announcement Number Procurement Instrument Number NEPA Control Number em Number DE-FOA000643 NT43199 GF0-Q043199-OO1 Based on my review ofthe inrormation concerning the proposed action, as NEPA Compliance Officer (authorized under DOE Order 451.IA), I have made the following determination: ex. EA, [IS APPENDIX AND NUMBER: Description: A9 Information gathering, analysis, and dissemination Information gathering (induding, but not limited to, literature surveys, inventories, site visits, and audits), data analysis (including, but not limited to, computer modeling), document preparation

442

GRR/Section 6-MT-b - Construction Storm Water Permit | Open Energy  

Open Energy Info (EERE)

MT-b - Construction Storm Water Permit MT-b - Construction Storm Water Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 6-MT-b - Construction Storm Water Permit 06MTBConstructionStormWaterPermit (7).pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Regulations & Policies Montana Code Annotated 75-5 [ARM 17.30.1101] Triggers None specified Click "Edit With Form" above to add content 06MTBConstructionStormWaterPermit (7).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative Montana regulates water quality under Montana Code Annotated 75-5. The

443

GRR/Section 12-MT-a - Flora & Fauna Considerations | Open Energy  

Open Energy Info (EERE)

GRR/Section 12-MT-a - Flora & Fauna Considerations GRR/Section 12-MT-a - Flora & Fauna Considerations < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 12-MT-a - Flora & Fauna Considerations 12MTAFloraFaunaConsiderations (2).pdf Click to View Fullscreen Contact Agencies Montana Fish, Wildlife & Parks Regulations & Policies Commercial Use Administrative Rules Triggers None specified Click "Edit With Form" above to add content 12MTAFloraFaunaConsiderations (2).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative This flowchart and the following content outlines the flora and fauna considerations that are specific to Montana and in addition to federal

444

Enhanced Accident Tolerant LWR Fuels National Metrics Workshop Report  

SciTech Connect

The U.S. Department of Energy Office of Nuclear Energy (DOE-NE), in collaboration with the nuclear industry, has been conducting research and development (R&D) activities on advanced Light Water Reactor (LWR) fuels for the last few years. The emphasis for these activities was on improving the fuel performance in terms of increased burnup for waste minimization and increased power density for power upgrades, as well as collaborating with industry on fuel reliability. After the events at the Fukushima Nuclear Power Plant in Japan in March 2011, enhancing the accident tolerance of LWRs became a topic of serious discussion. In the Consolidated Appropriations Act, 2012, Conference Report 112-75, the U.S. Congress directed DOE-NE to: • Give “priority to developing enhanced fuels and cladding for light water reactors to improve safety in the event of accidents in the reactor or spent fuel pools.” • Give “special technical emphasis and funding priority…to activities aimed at the development and near-term qualification of meltdown-resistant, accident-tolerant nuclear fuels that would enhance the safety of present and future generations of light water reactors.” • Report “to the Committee, within 90 days of enactment of this act, on its plan for development of meltdown-resistant fuels leading to reactor testing and utilization by 2020.” Fuels with enhanced accident tolerance are those that, in comparison with the standard UO2-zirconium alloy system currently used by the nuclear industry, can tolerate loss of active cooling in the reactor core for a considerably longer time period (depending on the LWR system and accident scenario) while maintaining or improving the fuel performance during normal operations, and operational transients, as well as design-basis and beyond design-basis events. The overall draft strategy for development and demonstration is comprised of three phases: Feasibility Assessment and Down-selection; Development and Qualification; and Commercialization. The activities performed during the feasibility assessment phase include laboratory scale experiments; fuel performance code updates; and analytical assessment of economic, operational, safety, fuel cycle, and environmental impacts of the new concepts. The development and qualification stage will consist of fuel fabrication and large scale irradiation and safety basis testing, leading to qualification and ultimate NRC licensing of the new fuel. The commercialization phase initiates technology transfer to industry for implementation. Attributes for fuels with enhanced accident tolerance include improved reaction kinetics with steam and slower hydrogen generation rate, while maintaining acceptable cladding thermo-mechanical properties; fuel thermo-mechanical properties; fuel-clad interactions; and fission-product behavior. These attributes provide a qualitative guidance for parameters that must be considered in the development of fuels and cladding with enhanced accident tolerance. However, quantitative metrics must be developed for these attributes. To initiate the quantitative metrics development, a Light Water Reactor Enhanced Accident Tolerant Fuels Metrics Development Workshop was held October 10-11, 2012, in Germantown, Maryland. This document summarizes the structure and outcome of the two-day workshop. Questions regarding the content can be directed to Lori Braase, 208-526-7763, lori.braase@inl.gov.

Lori Braase

2013-01-01T23:59:59.000Z

445

How Does Your Data Center Measure Up? Energy Efficiency Metrics and Benchmarks for Data Center Infrastructure Systems  

E-Print Network (OSTI)

Up? Energy Efficiency Metrics and Benchmarks for Data CenterUp? Energy Efficiency Metrics and Benchmarks for Data CenterHigh Med/High Figure 4. Benchmarks for Return Temperature

Mathew, Paul

2009-01-01T23:59:59.000Z

446

Sensitivity of Multi-gas Climate Policy to Emission Metrics  

Science Conference Proceedings (OSTI)

Multi-gas greenhouse emission targets require that different emissions be combined into an aggregate total. The Global Warming Potential (GWP) index is currently used for this purpose, despite various criticisms of the underlying concept. It is not possible to uniquely define a single metric that perfectly captures the different impacts of emissions of substances with widely disparate atmospheric lifetimes, which leads to a wide range of possible index values. We examine the sensitivity of emissions and climate outcomes to the value of the index used to aggregate methane emissions using a technologically detailed integrated assessment model. We find that the sensitivity to index value is of order 4-14% in terms of methane emissions and 2% in terms of total radiative forcing, using index values between 4 and 70 for methane, with larger regional differences in some cases. The sensitivity to index value is much higher in economic terms, with total 2-gas mitigation cost decreasing 4-5% for a lower index and increasing 10-13% for a larger index, with even larger changes if the emissions reduction targets are small. The sensitivity to index value also depends on the assumed maximum amount of mitigation available in each sector. Evaluation of the maximum mitigation potential for major sources of non-CO2 greenhouse gases would greatly aid analysis

Smith, Steven J.; Karas, Joseph F.; Edmonds, James A.; Eom, Jiyong; Mizrahi, Andrew H.

2013-04-01T23:59:59.000Z

447

From Dark Energy and Dark Matter to Dark Metric  

E-Print Network (OSTI)

It is nowadays clear that General Relativity cannot be the definitive theory of Gravitation due to several shortcomings that come out both from theoretical and experimental viewpoints. At large scales (astrophysical and cosmological) the attempts to match it with the latest observational data lead to invoke Dark Energy and Dark Matter as the bulk components of the cosmic fluid. Since no final evidence, at fundamental level, exists for such ingredients, it is clear that General Relativity presents shortcomings at infrared scales. On the other hand, the attempts to formulate more general theories than Einstein's one give rise to mathematical difficulties that need workarounds that, in turn, generate problems from the interpretative viewpoint. We present here a completely new approach to the mathematical objects in terms of which a theory of Gravitation may be written in a first-order (a' la Palatini) formalism, and introduce the concept of Dark Metric which could completely bypass the introduction of disturbing concepts as Dark Energy and Dark Matter.

S. Capozziello; M. De Laurentis; M. Francaviglia; S. Mercadante

2008-05-23T23:59:59.000Z

448

Characterizing Application Runtime Behavior from System Logs and Metrics  

Science Conference Proceedings (OSTI)

Large-scale systems are heavily shared resource environments where a mix of applications are launched concurrently competing for network and storage resources. It is essential to characterize the runtime behavior of these applications for provisioning system resources and understanding the impact of application s performance when competing for resources. In this paper, we study the use of zero- and low-overhead system logs and other system metric data for characterizing the runtime behavior of several applications. We present our preliminary work on estimating individual application s I/O demands by observing file system usage pattern over multiple runs, and interpreting application s network utilization characteristics by observing link-layer error logs. We also present preliminary findings on using such information in making context-sensitive scheduling decisions that minimize potentially negative interactions between applications competing for shared resources. Our analysis is based on four months of system log data collected on one of the world s largest supercomputing facilities, the Jaguar XT5 petaflop system at Oak Ridge National Laboratory.

Gunasekaran, Raghul [ORNL; Dillow, David A [ORNL; Shipman, Galen M [ORNL; Vuduc, Richard [Georgia Institute of Technology; Chow, Edmond [Georgia Institute of Technology

2011-01-01T23:59:59.000Z

449

Metrics on unitary matrices and their application to quantifying the degree of non-commutativity between unitary matrices  

Science Conference Proceedings (OSTI)

By studying the minimum resources required to perform a unitary transformation, families of metrics and pseudo-metrics on unitary matrices that are closely related to a recently reported quantum speed limit by the author are found. Interestingly, this ... Keywords: eigenvalue perturbation theory, measurement of non-commutativity, metrics for unitary matrices, quantum information processing

H. F. Chau

2011-09-01T23:59:59.000Z

450

Mapping and Embedding of Two Metrics Associated with Dark Matter, Dark Energy, and Ordinary Matter  

E-Print Network (OSTI)

In this paper we build a mapping between two different metrics and embed them in a flat manifold. One of the metrics represents the ordinary matter, and the other describes the dark matter, the dark energy, and the particle-antiparticle asymmetry. The latter was obtained in a recent paper. For the mapping and embedding, we use two new formalisms developed and presented in two previous papers, Mapping Among Manifolds and, Conformal Form of Pseudo-Riemannian Metrics by Normal Coordinate Transformations, which was a generalization of the Cartan's approach of Riemannian normal coordinates.

de Siqueira, A C V V

2010-01-01T23:59:59.000Z

451

Mapping and Embedding of Two Metrics Associated with Dark Matter, Dark Energy, and Ordinary Matter  

E-Print Network (OSTI)

In this paper we build a mapping between two different metrics and embed them in a flat manifold. One of the metrics represents the ordinary matter, and the other describes the dark matter, the dark energy, and the particle-antiparticle asymmetry. The latter was obtained in a recent paper. For the mapping and embedding, we use two new formalisms developed and presented in two previous papers, Mapping Among Manifolds and, Conformal Form of Pseudo-Riemannian Metrics by Normal Coordinate Transformations, which was a generalization of the Cartan's approach of Riemannian normal coordinates.

A. C. V. V. de Siqueira

2010-10-29T23:59:59.000Z

452

Grid Reliability Performance Metrics Using Phasor Data and Model-less Algorithms,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reliability Performance Metrics Using Reliability Performance Metrics Using Phasor Data and Model-less Algorithms, Prototype Development and Field Test Carlos Martinez - Advanced Systems Researchers (ASR) cmartinez@asresearchers.com June 27-28 2013 Washington, DC DOE/OE Transmission Reliability Program 2 Project Objective LOAD-GENERATION CONTROL RELIABILITY PERFORMANCE REALTIME MONITORING GRID RELIABILITY PERFORMANCE PHASOR BASED AND MODELESS REALTIME MONITORING RESEARCH, PROTOTYPE AND FIELD TEST ALL APPLICATIONS IN PRODUCTION PROJECT OBJECTIVES 3 Project Analytics Approach 4 Accomplishments to be Completed in FY 2013 * Deliver to MISO the Extended Prototype Functional Specification * Complete Research, Test and Validation of Grid Post- Disturbance Reliability Metrics

453

MT_GEQ_Handbook_July2009.doc MUSIC EDUCATION AND MUSIC THERAPY (MEMT)  

E-Print Network (OSTI)

MT_GEQ_Handbook_July2009.doc MUSIC EDUCATION AND MUSIC THERAPY (MEMT) Music Therapy Graduate Equivalency Program Handbook Music Therapy Graduate Equivalency Program Individuals who hold baccalaureate in Music Therapy planning outline. This handbook is designed to supplement the information in the KU

Peterson, Blake R.

454

PyMT: a post-WIMP multi-touch user interface toolkit  

Science Conference Proceedings (OSTI)

Multi-touch and tabletop input paradigms open novel doors for post-WIMP (Windows, Icons, Menus, Pointer) user interfaces. Developing these novel interfaces and applications poses unique challenges for designers and programmers alike. We present PyMT ... Keywords: GUI, Python, UI toolkits, graphics, multi-touch, open source, post-WIMP, user interfaces

Thomas E. Hansen; Juan Pablo Hourcade; Mathieu Virbel; Sharath Patali; Tiago Serra

2009-11-01T23:59:59.000Z

455

Scale-up of mild gasification to be a process development unit mildgas 24 ton/day PDU design report. Final report, November 1991--July 1996  

Science Conference Proceedings (OSTI)

From November 1991 to April 1996, Kerr McGee Coal Corporation (K-M Coal) led a project to develop the Institute of Gas Technology (IGT) Mild Gasification (MILDGAS) process for near-term commercialization. The specific objectives of the program were to: design, construct, and operate a 24-tons/day adiabatic process development unit (PDU) to obtain process performance data suitable for further design scale-up; obtain large batches of coal-derived co-products for industrial evaluation; prepare a detailed design of a demonstration unit; and develop technical and economic plans for commercialization of the MILDGAS process. The project team for the PDU development program consisted of: K-M Coal, IGT, Bechtel Corporation, Southern Illinois University at Carbondale (SIUC), General Motors (GM), Pellet Technology Corporation (PTC), LTV Steel, Armco Steel, Reilly Industries, and Auto Research.

NONE

1996-03-01T23:59:59.000Z

456

Table 11.1 Carbon Dioxide Emissions From Energy Consumption by ...  

U.S. Energy Information Administration (EIA)

1 Metric tons of carbon dioxide can be converted to metric tons of carbon equivalent by multiplying by 12/44. 9 Includes electric power sector use of ...

457

Table 11.2d Carbon Dioxide Emissions From Energy Consumption ...  

U.S. Energy Information Administration (EIA)

1 Metric tons of carbon dioxide can be converted to metric tons of carbon equivalent by multiplying by 12/44. 8 Fuel ethanol minus denaturant. 2 Carbo ...

458

Monthly Energy Review - Energy Information Administration  

U.S. Energy Information Administration (EIA)

Year: Coal Transportation Sector CO2 Emissions (Million Metric Tons of Carbon Dioxide) Natural Gas Transportation Sector CO2 Emissions (Million Metric Tons of Carbon ...

459

Table 11.5a Emissions From Energy Consumption for ...  

U.S. Energy Information Administration (EIA)

1 Metric tons of carbon dioxide can be converted to metric tons of carbon equivalent by multiplying by 12/44. 7 Blast furnace gas, propane gas, and ...

460

Investigations on catalyzed steam gasification of biomass. Appendix A. Feasibility study of methane production via catalytic gasification of 2000 tons of wood per day  

DOE Green Energy (OSTI)

A study has been made of the economic feasibility of producing substitute natural gas (SNG) from wood via catalytic gasification with steam. The plant design in this study was developed from information on gasifier operation supplied by the Pacific Northwest Laboratory (PNL). The plant is designed to process 2000 tons per day of dry wood to SNG. Plant production is 21.6 MM scfd of SNG with a HHV of 956 Btu per scf. All process and support facilities necessary to convert wood to SNG are included. The plant location is Newport, Oregon. The capital cost for the plant is $95,115,000 - September, 1980 basis. Gas production costs which allow for return on capital have been calculated for various wood prices for both utility and private investor financing. For utility financing, the gas production costs are respectively $5.09, $5.56, $6.50, and $8.34 per MM Btu for wood costs of $5, $10, $20, and $40 per dry ton delivered to the plant at a moisture content of 49.50 wt %. For private investor financing, the corresponding product costs are $6.62, $7.11, $8.10, and $10.06 per MM Btu. The cost calculated by the utility financing method includes a return on equity of 15% and an interest rate of 10% on the debt. The private investor financing method, which is 100% equity financing, incorporates a discounted cash flow (DCF) return on equity of 12%. The thermal efficiency without taking an energy credit for by-product char is 58.3%.

Mudge, L.K.; Weber, S.L.; Mitchell, D.H.; Sealock, L.J. Jr.; Robertus, R.J.

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Discretization of continuous ECG based risk metrics using asymmetric and warped entropy measures  

E-Print Network (OSTI)

We investigate several entropy based approaches to finding cut points for discretizing continuous ECG-based risk metrics. We describe two existing approaches, Shannon entropy and asymmetric entropy, and one new approach, ...

Singh, Anima

462

Investigating the association between birth weight and complementary air pollution metrics: a cohort study  

E-Print Network (OSTI)

land use regression models for traffic-related air pollution.air pollution metrics, for pregnancy-long exposures (a) Landpollution were used (measurements from ambient monitoring stations, predictions from land

Laurent, Olivier; Wu, Jun; Li, Lianfa; Chung, Judith; Bartell, Scott

2013-01-01T23:59:59.000Z

463

Greenhouse Gas Return on Investment: A New Metric for Energy Technology  

E-Print Network (OSTI)

CarbonPlanet, 2007, Greenhouse Gas Emissions by Country,In this discussion of greenhouse gas emissions and energyGreenhouse Gas Return on Investment: A New Metric for Energy

Reich-Weiser, Corinne; Dornfeld, David; Horne, Steve

2008-01-01T23:59:59.000Z

464

Inflaton field fluctuations from gauge-invariant metric fluctuations during inflation  

E-Print Network (OSTI)

The evolution of the inflaton field fluctuations from gauge-invariant metric fluctuations is discused. In particular, the case of a symmetric $\\phi_c$-exponential potential is analyzed.

Mariano Anabitarte; Mauricio Bellini

2004-06-28T23:59:59.000Z

465

A metric time-point and duration-based temporal model  

Science Conference Proceedings (OSTI)

Constraint-based formalisms are a useful and common way to deal with temporal reasoning tasks. Assertions represent temporal constraints between temporal objects, time-points or intervals: Metric temporal constraints between time points permit us to ...

Federico A. Barber

1993-07-01T23:59:59.000Z

466

Viscose Cosmology in $f(R)$ Gravity for Kasner Type Metric  

E-Print Network (OSTI)

We study $f(R)$ modifications of Einstein's gravity in a viscous Bianchi type I for a Kasner form metric. We get the $f(R)$ function that satisfy dominant energy condition.

Kh. Saaidi; A. Aghamohammadi; H. Hossienkhani

2010-10-25T23:59:59.000Z

467

Metrics and Diagnostics for Precipitation-Related Processes in Climate Model Short-Range Hindcasts  

Science Conference Proceedings (OSTI)

In this study, several metrics and diagnostics are proposed and implemented to systematically explore and diagnose climate model biases in short-range hindcasts and quantify how fast hindcast biases approach to climate biases with an emphasis on ...

H.-Y. Ma; S. Xie; J. S. Boyle; S. A. Klein; Y. Zhang

2013-03-01T23:59:59.000Z

468

Evaluating salience metrics for the context-adequate realization of discourse referents  

Science Conference Proceedings (OSTI)

We describe the application of a framework for salience metrics and linguistic variability with respect to the contextually adequate choice of referring expressions and grammatical roles: Where multiple meaning-equivalent candidate realizations are available ...

Christian Chiarcos

2011-09-01T23:59:59.000Z

469

Investigating Error Metrics for Satellite Rainfall Data at Hydrologically Relevant Scales  

Science Conference Proceedings (OSTI)

This paper addresses the following open question: What set of error metrics for satellite rainfall data can advance the hydrologic application of new-generation, high-resolution rainfall products over land? The authors’ primary aim is to initiate ...

Faisal Hossain; George J. Huffman

2008-06-01T23:59:59.000Z

470

Spatial Forecast Verification: Baddeley’s Delta Metric Applied to the ICP Test Cases  

Science Conference Proceedings (OSTI)

A mathematical displacement metric, Baddeley’s ?, is examined for verifying gridded forecasts against gridded observations using the Spatial Forecast Verification Methods Intercomparison Project test cases. Results are compared with several other ...

Eric Gilleland

2011-06-01T23:59:59.000Z

471

A New Metric for Estimating the Influence of Evaporation on Seasonal Precipitation Rates  

Science Conference Proceedings (OSTI)

The objective of this paper is to introduce a diagnostic metric—termed the local-convergence ratio—that can be used to quantify the contribution of evaporation (and transpiration) to the atmospheric hydrologic cycle, and precipitation in ...

Bruce T. Anderson; Guido Salvucci; Alex C. Ruane; John O. Roads; Masao Kanamitsu

2008-06-01T23:59:59.000Z

472

SECURITY METRICS: MEASUREMENTS TO SUPPORT THE CONTINUED DEVELOPMENT OF INFORMATION SECURITY TECHNOLOGY  

E-Print Network (OSTI)

SECURITY METRICS: MEASUREMENTS TO SUPPORT THE CONTINUED DEVELOPMENT OF INFORMATION SECURITY TECHNOLOGY Shirley Radack, Editor Computer Security Division Information Technology Laboratory National and to protect their systems and information from security threats and risks. There have been many past efforts

473

Evaluation of transient agility metrics through unmanned simulation of the X-31 post-stall aircraft  

E-Print Network (OSTI)

Development of post-stall capable aircraft has enhanced the research of agility, the ability of an aircraft to quickly and precisely change from its present state to a desired new state, and its measurement. Controlled high angle of attack (AOA) flight and rapid nose-pointing are now realities with thrust vectoring. Traditional measures of merit are incapable of comprehensively describing the rapid changes in aircraft state during close-in combat. As complements to conventional performance measures of merit, agility metrics provide a more complete description of an aircraft's rapid maneuvering capabilities. A batch simulation model of the RockwelVMBB X-31A aircraft is used to evaluate recommended open-loop longitudinal, lateral, and axial agility metrics for their effectiveness in describing transient agility characteristics, maneuvering in the 1-3 second time scale, of a post-stall fighter. Comparison to Valasek and Downing's conventional fighter aircraft agility simulations is done for each axis of agility tests, and the performance improvements due to thrust vectoring are highlighted. The power loss rate and onset rate axial agility metrics are acceptable descriptors of an aircraft's ability to rapidly transition between energy levels. The power loss rate test is modified to include a rapid pitch up maneuver and evaluate the ability to create induced drag and maximize power loss rate. The post-stall axial agility metric. Longitudinal nose pointing metrics maneuver is recommended as a post-stall axial agility metric. Longitudinal nose pointing metrics effectively describe post-stall agility and performance improvements due to thrust vectoring with the maximum, minimum, and average pitch rate metrics. A new flight path agility measure, the pitch impulse metric, is developed and simulated on the X-3 IA to describe an aircraft's balance of maximum load factor generation and maintenance during a pitch maneuver. High and low AOA lateral agility tests also show improved roll performance about the velocity vector. A high AOA loaded roll metric is developed using the integral of the velocity vector roll rate as the angle of interest. Acquisition of the X-31A batch simulation Version-120 is recommended as well as incorporating the newly acquired Agile-VU visualization program with metric research and flying recommended closed-loop agility maneuvers on the fixed-base simulator for post-stall agility evaluation.

Fischer, Shiloh Douglas

1996-01-01T23:59:59.000Z

474

Survey of life-cycle measures and metrics for concurrent product and process design  

Science Conference Proceedings (OSTI)

Concurrent Engineering needs a series of measures (or measurement criteria) that are distinct to each process, and a set of metrics to check (and validate) the outcome when two or more of the life-cycle processes are overlapped or required to be executed ... Keywords: Concurrent Engineering, Knowledge-based Systems, Life-cycle Measures and Metrics, Rule-based Optimization, Rule-based Simulation

Biren Prasad

2000-04-01T23:59:59.000Z

475

Metrics and Methods for Consideration of Flexibility in Power System Planning  

Science Conference Proceedings (OSTI)

This report describes work done in 2012 as part of the Grid Planning “Strategic and Flexible Planning” project. This project is concerned with methods and metrics to assess power system flexibility to manage variability and uncertainty. In 2011, a two-tiered approach to this issue was proposed, and aspects of system flexibility were demonstrated. This year’s work continued the development of both high-level screening and detailed, simulation-based metrics and methods for assessing ...

2012-12-31T23:59:59.000Z

476

Graphene and the Zermelo optical metric of the BTZ black hole  

Science Conference Proceedings (OSTI)

It is well known that the low energy electron excitations of the curved graphene sheet {Sigma} are solutions of the massless Dirac equation on a 2+1 dimensional ultra-static metric on R Multiplication-Sign {Sigma}. An externally applied electric field on the graphene sheet induces a gauge potential which could be mimicked by considering a stationary optical metric of the Zermelo form, which is conformal to the BTZ black hole when the sheet has a constant negative curvature. The Randers form of the metric can model a magnetic field, which is related by a boost to an electric one in the Zermelo frame. We also show that there is a fundamental geometric obstacle to obtaining a model that extends all the way to the black hole horizon. - Highlights: Black-Right-Pointing-Pointer Electrons on graphene sheets obey the Dirac equation in ultra-static metrics. Black-Right-Pointing-Pointer External magnetic fields on give ultra-stationary metrics. Black-Right-Pointing-Pointer These metrics are of optical-Zermelo form. Black-Right-Pointing-Pointer Embedded surfaces corresponding to BTZ black holes are given.

Cvetic, M. [Department of Physics and Astronomy, University of Pennsylvania, Philadelphia, PA 19104-6396 (United States) [Department of Physics and Astronomy, University of Pennsylvania, Philadelphia, PA 19104-6396 (United States); Center for Applied Mathematics and Theoretical Physics, University of Maribor, Maribor (Slovenia); Gibbons, G.W, E-mail: gwg1@damtp.cam.ac.uk [D.A.M.T.P., University of Cambridge, Wilberforce Road, Cambridge CB3 0WA (United Kingdom)] [D.A.M.T.P., University of Cambridge, Wilberforce Road, Cambridge CB3 0WA (United Kingdom)

2012-11-15T23:59:59.000Z

477

Saving Tons at the Register  

NLE Websites -- All DOE Office Websites (Extended Search)

Brown, and Max H. Sherman Conference Name Proceedings of the 1998 ACEEE Summer Study on Energy Effciency in Buildings, Pacific Grove, CA Volume 1 Pagination 367-383 Publisher...

478

GRR/Section 17-MT-a - Aesthetic Resource Assessment | Open Energy  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » GRR/Section 17-MT-a - Aesthetic Resource Assessment < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 17-MT-a - Aesthetic Resource Assessment 17MTAAestheticResourceAssessment.pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Montana Department of Environmental Quality Montana Fish, Wildlife & Parks Regulations & Policies MCA 75-7-101 et seq The Natural Streambed and Land Preservation Act of 1975 MCA 87-5-501 et seq Montana Stream Protection

479

Sykes, M.T., I.C. Prentice, and W. Cramer. 1996. A bioclimatic  

NLE Websites -- All DOE Office Websites (Extended Search)

Sykes, M.T., I.C. Prentice, and W. Cramer. 1996. A bioclimatic Sykes, M.T., I.C. Prentice, and W. Cramer. 1996. A bioclimatic model for the potential distributions of north European tree species under present and future climates. Journal of Biogeography 23(2):203- 233. A bioclimatic model based on physiological constraints to plant growth and regeneration is used here in an empirical way to describe the present natural distributions of northern Europe's major trees. Bioclimatic variables were computed from monthly means of temperature, precipitation and sunshine (%) interpolated to a 10' grid taking into account elevation. Minimum values of mean coldest-month temperature (T-c) and 'effective' growing degree days (GDD*) were fitted to species' range limits. GDD* is total annual growing degree days (GDD) minus GDD to budburst (GDD(o)). Each species was assigned to one of the

480

GRR/Section 3-MT-b - State Land Access | Open Energy Information  

Open Energy Info (EERE)

b - State Land Access b - State Land Access < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 3-MT-b - State Land Access 03MTBStateLandAccess (1).pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Montana State Land Board Regulations & Policies Montana Code 77-4-101 et seq Geothermal Resources Natural Resources and Conservation Rules Triggers None specified Click "Edit With Form" above to add content 03MTBStateLandAccess (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative 3-MT-b.1 - Application for Lease, Right-of-Way, or Easement

Note: This page contains sample records for the topic "metric tons mt" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

GRR/Section 14-MT-c - Underground Injection Control Permit | Open Energy  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » GRR/Section 14-MT-c - Underground Injection Control Permit < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 14-MT-c - Underground Injection Control Permit 14MTCUndergroundInjectionControlPermit.pdf Click to View Fullscreen Contact Agencies United States Environmental Protection Agency Triggers None specified Click "Edit With Form" above to add content 14MTCUndergroundInjectionControlPermit.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

482

GRR/Section 11-MT-a - State Cultural Considerations | Open Energy  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » GRR/Section 11-MT-a - State Cultural Considerations < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 11-MT-a - State Cultural Considerations 11MTAStateCulturalConsiderations (1).pdf Click to View Fullscreen Contact Agencies Montana State Historic Preservation Office Regulations & Policies MCA 22-3-421: Report of Discovery on State Land MCA 22-3-800: Human Skeletal Remains and Burial Site Protection Act Triggers None specified Click "Edit With Form" above to add content

483

GRR/Section 3-MT-c - Encroachment Overview | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » GRR/Section 3-MT-c - Encroachment Overview < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 3-MT-c - Encroachment Overview 03MTCEncroachmentOverview.pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Triggers None specified Click "Edit With Form" above to add content 03MTCEncroachmentOverview.pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative There are several individual right of way or encroachment procedures in Montana. This overview is intended to lead the developer to the appropriate

484

GRR/Section 9-MT-a - Montana Environmental Policy Act | Open Energy  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » GRR/Section 9-MT-a - Montana Environmental Policy Act < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 9-MT-a - Montana Environmental Policy Act 09MTAMontanaEnvironmentalPolicyAct.pdf Click to View Fullscreen Contact Agencies Montana Department of Environmental Quality Montana Environmental Quality Council Regulations & Policies Montana Environmental Policy Act National Environmental Policy Act ARM 36-2-521 et seq ARM 17-4-607 General Requirements for MFWP Triggers None specified Click "Edit With Form" above to add content 09MTAMontanaEnvironmentalPolicyAct.pdf Error creating thumbnail: Page number not in range.

485

Aeromagnetic Survey At Mt St Helens Area (Towle, 1983) | Open Energy  

Open Energy Info (EERE)

Towle, 1983) Towle, 1983) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aeromagnetic Survey At Mt St Helens Area (Towle, 1983) Exploration Activity Details Location Mt St Helens Area Exploration Technique Aeromagnetic Survey Activity Date Usefulness useful DOE-funding Unknown Notes The VLF method has proved useful in mapping the crater and central dome of Mount St. Helens. More detailed and extensive VLF investigations as well as other electrical and electromagnetic studies will be useful in determining the electrical structure of Mount St. Helens in more detail. Electrical and electromagnetic methods would be especially useful in determining the actual electrical conductivity of partial melt beneath the dome. The ability of these methods to determine the correlation of surface features

486

GRR/Section 11-MT-b - Human Remains Process | Open Energy Information  

Open Energy Info (EERE)

b - Human Remains Process b - Human Remains Process < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 11-MT-b - Human Remains Process 11MTBHumanRemainsProcess (1).pdf Click to View Fullscreen Contact Agencies Montana State Historic Preservation Office Regulations & Policies MCA 22-3-805: Discovery of Human Remains or Burial Material Triggers None specified Click "Edit With Form" above to add content 11MTBHumanRemainsProcess (1).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range. Flowchart Narrative _ 11-MT-b.1 - Cease Operations and Contact County Coroner MCA 22-3-805: (1) A [developer] who by...construction, or other ground-disturbing

487

GRR/Section 19-MT-a - Water Access & Water Rights Issues | Open Energy  

Open Energy Info (EERE)

GRR/Section 19-MT-a - Water Access & Water Rights Issues GRR/Section 19-MT-a - Water Access & Water Rights Issues < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 19-MT-a - Water Access & Water Rights Issues 19MTAWaterAccessWaterRightsIssues (2).pdf Click to View Fullscreen Contact Agencies Montana Department of Natural Resources & Conservation Regulations & Policies MCA Title 85 Water Use MCA 77-4-108 Water Rights in Connection with Geothermal Development MCA 85-2-307 MCA 85-2-308 MCA 85-2-309 MCA 85-2-310 MCA 85-2-311 MCA 85-2-313 MCA 85-2-315 Triggers None specified Click "Edit With Form" above to add content 19MTAWaterAccessWaterRightsIssues (2).pdf Error creating thumbnail: Page number not in range. Error creating thumbnail: Page number not in range.

488

Structural and heat-flow implications of infrared anomalies at Mt. Hood, Oregon  

DOE Green Energy (OSTI)

Surface thermal features occur in an area of 9700 m/sup 2/ at Mt. Hood, on the basis of an aerial line-scan survey made April 26, 1973. The distribution of the thermal areas below the summit of Mt. Hood, shown on planimetrically corrected maps at 1 : 12,000, suggests structural control by a fracture system and brecciated zone peripheral to a hornblende-dacite plug dome (Crater Rock), and by a concentric fracture system that may have been associated with development of the present crater. The extent and inferred temperature of the thermal areas permits a preliminary estimate of a heat discharge of 10 megawatts, by analogy with similar fumarole and thermal fields of Mt. Baker, Washington. This figure includes a heat loss of 4 megawatts (MW) via conduction, diffusion, evaporation, and radiation to the atmosphere, and a somewhat less certain loss of 6 MW via fumarolic mass transfer of vapor and advective heat loss from runoff and ice melt. The first part of the estimate is based on two-point models for differential radiant exitance and differential flux via conduction, diffusion, evaporation, and radiation from heat balance of the ground surface. Alternate methods for estimating volcanogenic geothermal flux that assume a quasi-steady state heat flow also yield estimates in the 5-11 MW range. Heat loss equivalent to cooling of the dacite plug dome is judged to be insufficient to account for the heat flux at the fumarole fields.

Friedman, J.D.; Frank, D.

1977-01-01T23:59:59.000Z

489

An assessment of regional climate trends and changes to the Mt. Jaya glaciers of Irian Jaya  

E-Print Network (OSTI)

Over the past century, glaciers throughout the tropics have predominately retreated. These small glaciers, which respond quickly to climate changes, are becoming increasingly important in understanding glacier-climate interactions. The glaciers on Mt. Jaya in Irian Jaya, Indonesia are the last remaining tropical glaciers in the Western Pacific region. Although considerable research exists investigating the climatic factors most affecting tropical glacier mass balance, extensive research on the Mt. Jaya glaciers has been lacking since the early 1970s. Using IKONOS satellite images, the ice extents of the Mt. Jaya glaciers in 2000, 2002, 2003, 2004, and 2005 were mapped. The mapping indicates that the recessional trend which began in the mid-19th century has continued. Between 1972 (Allison, 1974; Allison and Peterson, 1976) and 2000, the glaciers lost approximately 67.6% of their area, representing a reduction in surface ice area from 7.2 km2 to 2.35 km2. From 2000 to 2005, the glaciers lost an additional 0.54 km2, representing approximately 24% of the 2000 area. Rates of ice loss, calculated from area measurements for the Mt. Jaya glaciers in 1942, 1972, 1987, and 2005, indicate that ice loss on Mt. Jaya has increased during each subsequent period. Preliminary modeling, using 600 hPa atmospheric temperature, specific humidity, wind speeds, surface precipitation, and radiation values, acquired from the NCEP Reanalysis dataset, indicates that the only climate variable having a statistically-significant change with a magnitude great enough to strongly affect ice loss on these glaciers was an increase in the mean monthly atmospheric temperature of 0.24�°C between 1972 and 1987. However, accelerated ice loss occurring from 1988-2005 without large observed changes in the weather variables indicates that a more complex explanation may be required. Small, though statistically-significant changes were found in regional precipitation, with precipitation decreasing from 1972-1987 and increasing from 1988-2005. While, individually, these changes were not of sufficient magnitude to have greatly affected ice loss on these glaciers, increased precipitation along with a rising freezing level may have resulted in a greater proportion of the glacier surface being affected by rain. This may account for the increased recession rate observed in the latter period.

Kincaid, Joni L.

2003-05-01T23:59:59.000Z

490

An Estimate of the Chemical and Radiative Perturbation of Stratospheric Ozone Following the Eruption of Mt. Pinatubo  

Science Conference Proceedings (OSTI)

In this work a numerical assessment is attempted of trace species interactions with aerosols injected in the stratosphere by the eruption of Mt. Pinatubo. A photochemical two-dimensional model is used for this purpose, with heterogeneous chemical ...

G. Pitari; V. Rizi

1993-10-01T23:59:59.000Z

491

Quantitative Analysis of Mt. St. Helens Ash by X-Ray Diffraction and X-Ray Fluorescence Spectrometry  

Science Conference Proceedings (OSTI)

A quantitative study by x-ray diffraction, optical polarizing microscopy, and x-ray fluorescence spectrometry of fallout and ambient ash from three Mt. St. Helens eruptions has revealed a consistent picture of the mineralogical and elemental ...

Briant L. Davis; L. Ronald Johnson; Dana T. Griffen; William Revell Phillips; Robert K. Stevens; David Maughan

1981-08-01T23:59:59.000Z

492

Measuring solar reflectance-Part I: Defining a metric that accurately  

NLE Websites -- All DOE Office Websites (Extended Search)

solar reflectance-Part I: Defining a metric that accurately solar reflectance-Part I: Defining a metric that accurately predicts solar heat gain Title Measuring solar reflectance-Part I: Defining a metric that accurately predicts solar heat gain Publication Type Journal Article Year of Publication 2010 Authors Levinson, Ronnen M., Hashem Akbari, and Paul Berdahl Journal Solar Energy Volume 84 Pagination 1717-1744 Keywords Heat Island, Methods & Protocols Abstract Solar reflectance can vary with the spectral and angular distributions of incident sunlight, which in turn depend on surface orientation, solar position and atmospheric conditions. A widely used solar reflectance metric based on the ASTM Standard E891 beam-normal solar spectral irradiance underestimates the solar heat gain of a spectrally selective "cool colored" surface because this irradiance contains a greater fraction of near-infrared light than typically found in ordinary (unconcentrated) global sunlight. At mainland US latitudes, this metric RE891BN can underestimate the annual peak solar heat gain of a typical roof or pavement (slope 5:12 [23°]) by as much as 89 W m-2, and underestimate its peak surface temperature by up to 5 K. Using RE891BN to characterize roofs in a building energy simulation can exaggerate the economic value N of annual cool roof net energy savings by as much as 23%.

493

Distance to the scaling law: a useful approach for unveiling relationships between crime and urban metrics  

E-Print Network (OSTI)

We report on a quantitative analysis of relationships between the number of homicides, population size and other ten urban metrics. By using data from Brazilian cities, we show that well defined average scaling laws with the population size emerge when investigating the relations between population and number of homicides as well as population and urban metrics. We also show that the fluctuations around the scaling laws are log-normally distributed, which enabled us to model these scaling laws by a stochastic-like equation driven by a multiplicative and log-normally distributed noise. Because of the scaling laws, we argue that it is better to employ logarithms in order to describe the number of homicides in function of the urban metrics via regression analysis. In addition to the regression analysis, we propose an approach to correlate crime and urban metrics via the evaluation of the distance between the actual value of the number of homicides (as well as the value of the urban metrics) and the value that is...

Alves, Luiz G A; Lenzi, Ervin K; Mendes, Renio S

2013-01-01T23:59:59.000Z

494

Microsoft PowerPoint - DOE-RL Hanford Metrics Presentation.pptx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

from the Field: from the Field: Implementing Cyber Security Metrics that Work Rick Grandy & Gregg Serene Cyber Security MSA/Lockheed Martin DOE Hanford Site "To make our customers extraordinarily successful in our unified mission of cleaning up the Hanford cleaning up the Hanford Site..." Hanford Site Scope - 586 square miles - 9 000+ PCs 9,000+ PCs - 500+ servers - 400+ applications - 1 000+ miles fiber to 300 bldgs 1,000+ miles fiber to 300 bldgs - 12,500+ phones 2 Why Metrics? * How do you know if you're How do you know if you re doing well in school? * How do you know if an athlete is performing well? p g * How do you know if you're o do you o you e healthy? - Weight, Blood Pressure 3 Why Metrics? * Does a FISMA Score of "A" mean... - The cyber program is more effective? - The cyber program is more efficient?

495

EM Partnering Initiative: Journey to Excellence Metric No. 3.5 | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Partnering Initiative: Journey to Excellence Metric No. 3.5 Partnering Initiative: Journey to Excellence Metric No. 3.5 EM Partnering Initiative: Journey to Excellence Metric No. 3.5 Partnering establishes a collaborative approach among the Government and Contractor to achieve results. Partnering is not a contract; it does not alter the contractual relationship of the two parties. This teaming approach is based upon open communication, collaboration, and commitment to joint success. Partnering refocuses the nature of the working relationship based upon mutual goals and objectives. This model emphasizes early detection of problems and issues and proactive resolution of issues sooner than would happen through the normal process of performance and reporting. Partnering, therefore, is a commitment to perform in a collaborative manner as members

496

SO2907, A Putative TonB-dependent Receptor, Is Involved in Dissimilatory Iron Reduction by Shewanella oneidensis Strain MR-1  

Science Conference Proceedings (OSTI)

Shewanella oneidensis strain MR-1 utilizes soluble and insoluble ferric ions as terminal electron acceptors during anaerobic respiration. The components of respiratory metabolism are localized in the membrane fractions which include the outer membrane and cytoplasmic membrane. Many of the biological components that interact with the various iron forms are proposed to be localized in these membrane fractions. To identify the iron-binding proteins acting either as an iron transporter or as a terminal iron reductase, we used metal-catalyzed oxidation reactions. This system catalyzed the oxidation of amino acids in close proximity to the iron binding site. The carbonyl groups formed from this oxidation can then be labeled with fluoresceinamine (FLNH2). The peptide harboring the FLNH2 can then be proteolytically digested, purified by HPLC and then identified by MALDI-TOF tandem MS. A predominant peptide was identified to be part of SO2907 that encodes a putative TonB-dependent receptor. Compared to wild type (wt), the so2097 gene deletion (?SO2907) mutant has impaired ability to reduce soluble Fe(III), but retains the same ability to respire oxygen or fumarate as the wt. The ?SO2907 mutant was also impacted in reduction of insoluble iron. Iron binding assays using isothermal titration calorimetry and fluorescence tryptophan quenching demonstrated that a truncated form of heterologous-expressed SO2907 that contains the Fe(III) binding site, is capable of binding soluble Fe(III) forms with Kd of approximate 50 ?M. To the best of our knowledge, this is the first report of the physiological role of SO2907 in Fe(III) reduction by MR-1.

Qian, Yufeng; Shi, Liang; Tien, Ming

2011-09-30T23:59:59.000Z

497

A confirmation of agreement of different approaches for scalar gauge-invariant metric perturbations during inflation  

E-Print Network (OSTI)

We revisit an extension of the well-known formalism for gauge-invariant scalar metric fluctuations, to study the spectrums for both, the inflaton and gauge invariant (scalar) metric fluctuations in the framework of a single field inflationary model where the quasi-exponential expansion is driven by an inflation which is minimally coupled to gravity. The proposal here examined is valid also for fluctuations with large amplitude, but for cosmological scales, where vector and tensor perturbations can be neglected and the fluid is irrotacional.

Mariano Anabitarte; Mauricio Bellini

2008-09-30T23:59:59.000Z

498

Microsoft Word - Data Center Metrics Task Force Recommendations V2 5-17-2011.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Recommendations for Measuring and Reporting Overall Data Center Efficiency Version 2 - Measuring PUE for Data Centers 17 May 2011 Table of Contents 1 Introduction ............................................................................................................................................ 1 1.1 Purpose - Recommendations for Measuring and Publishing PUE at All Data Centers ... 1 1.2 Background - Guiding Principles for Data Center Efficiency Metrics ................................ 1 1.3 Scope of Recommendations ....................................................................................................... 2 2 Definitions ............................................................................................................................................... 2

499

Acceptability of Four Transformer Top-Oil Thermal Models: Pt. 2: Comparing Metrics  

E-Print Network (OSTI)

1 Acceptability of Four Transformer Top-Oil Thermal Models: Pt. 2: Comparing Metrics Lida Jauregui transformer top-oil thermal models are examined vis-à-vis training with measured data. Acceptability is unacceptable for model identification purposes. The linear top-oil model is acceptable for FOFA transformers

500

A NEW TEST METRIC AND A NEW SCAN ARCHITECTURE FOR EFFICIENT VLSI TESTING  

E-Print Network (OSTI)

A NEW TEST METRIC AND A NEW SCAN ARCHITECTURE FOR EFFICIENT VLSI TESTING A DISSERTATION SUBMITTED. To overcome the difficulty and cost of VLSI testing, we need to search for better testing techniques. Chip testing can be classified into two categories: production testing and characterization testing

Stanford University