National Library of Energy BETA

Sample records for metallurgy research building

  1. CMR: Chemistry and Metallurgy Research Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CMR: Chemistry and Metallurgy Research Facility CMR: Chemistry and Metallurgy Research Facility The Los Alamos National Laboratory (LANL) Chemistry and Metallurgy Research (CMR) building supports research and experimental activities for plutonium and uranium analytical chemistry and metallurgy. CMR capabilities support a number of national security programs, such as non-proliferation and nuclear safeguards. The CMR Facility In 1952, the first LANL CMR facility was completed. At that time, the

  2. CMR: Chemistry and Metallurgy Research Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CMR: Chemistry and Metallurgy Research Facility CMR: Chemistry and Metallurgy Research Facility The Los Alamos National Laboratory (LANL) Chemistry and Metallurgy Research (CMR) ...

  3. EIS-0350-S1: Supplemental Environmental Impact Statement for the Nuclear Facility Portion of the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, New Mexico

    Office of Energy Efficiency and Renewable Energy (EERE)

    This Supplemental EIS evaluates the completion of the Chemistry and Metallurgy Research Building Replacement (CMRR) Project, which consists of constructing the nuclear facility portion (CMRR-NF) at Los Alamos National Laboratory (LANL). The CMRR Project provides the analytical chemistry and materials characterization capabilities currently or previously performed in the existing Chemistry and Metallurgy Research (CMR) Building. Because of recent detailed site geotechnical investigations, certain aspects of the CMRR-NR project have changed resulting in change to the environmental impacts.

  4. EIS-0350: Final Environmental Impact Statement for the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory Los Alamos, New Mexico

    Broader source: Energy.gov [DOE]

    The CMRR EIS examines the potential environmental impacts associated with the Proposed Action of consolidating and relocating the mission-critical CMR capabilities from a degraded building to a new modern building(s).

  5. Building | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building We're creating infrastructure, refining materials and assembling technologies that accommodate our constantly changing world. Home > Impact > Building Global Research and GE Capital: Middle Market Collaboration In 2013, a partnering initiative between Global Research and GE Capital resulted in dozens of middle market companies... Read More » How Green Is Green? GE's Global Research Center's Ecoassessment Center of Excellence was created to study the impact of GE products and

  6. NREL Buildings Research Video

    ScienceCinema (OSTI)

    None

    2013-05-29

    Through research, the National Renewable Energy Laboratory (NREL) has developed many strategies and design techniques to ensure both commercial and residential buildings use as little energy as possible and also work well with the surroundings. Here you will find a video that introduces the work of NREL Buildings Research, highlights some of the facilities on the NREL campus, and demonstrates these efficient building strategies. Watch this video to see design highlights of the Science and Technology Facility on the NREL campus?the first Federal building to be LEED® Platinum certified. Additionally, the video demonstrates the energy-saving features of NRELs Thermal Test Facility. For a text version of this video visit http://www.nrel.gov/buildings/about_research_text_version.html

  7. NREL: Buildings Research - Events

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events Below are upcoming events related to buildings research. March 2016 Sustainable NREL Walking Campus Tour March 18, 2016, 9:30 - 11:15 am Golden, CO Contact: NREL Education...

  8. Passive solar buildings research

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1992-12-31

    This chapter covers research advances in passive solar buildings research during the time span from 1982 through 1991. These advances fall within the following categories: (1) short-term energy monitoring, (2) heat transport by natural convection within buildings, and (3) design guidelines and design tools. In short-term energy monitoring, a simulation model of the building is calibrated, based on data taken in a 3-day test. The method accurately predicts performance over an extended period. Heat transport through doorways is characterized for complex situations that arise in passive solar buildings. Simple concepts and models adequately describe the energy transport in many situations of interest. In a new approach, design guidelines are automatically generated for any specific locality. Worksheets or an accompanying computer program allow the designer to quickly and accurately evaluate performance and investigate design alternatives. 29 refs., 19 figs., 2 tabs.

  9. Building | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building We're creating infrastructure, refining materials and assembling technologies that accommodate our constantly changing world. Home > Impact > Building A Quirky Idea: Turning Patents Into Consumer Products In April 2013, GE and Quirky announced a partnership that introduces a whole new way of inventing. We teamed up with Quirky, the... Read More » Advanced Laser Manufacturing Tools Deliver Higher Performance In a research lab looking far, far into the future, a team of scientists

  10. Building America System Research

    SciTech Connect (OSTI)

    2013-04-01

    Residential Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review

  11. Plutonium Metallurgy

    SciTech Connect (OSTI)

    Freibert, Franz J. [Los Alamos National Laboratory

    2012-08-09

    Due to its nuclear properties, Pu will remain a material of global interest well into the future. Processing, Structure, Properties and Performance remains a good framework for discussion of Pu materials science Self-irradiation and aging effects continue to be central in discussions of Pu metallurgy Pu in its elemental form is extremely unstable, but alloying helps to stabilize Pu; but, questions remain as to how and why this stabilization occurs. Which is true Pu-Ga binary phase diagram: US or Russian? Metallurgical issues such as solute coring, phase instability, crystallographic texture, etc. result in challenges to casting, processing, and properties modeling and experiments. For Ga alloyed FCC stabilized Pu, temperature and pressure remain as variables impacting phase stability.

  12. Building | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building We're creating infrastructure, refining materials and assembling technologies that accommodate our constantly changing world. Home > Impact > Building Rio 2016 Olympic Games' technologies You cannot imagine how far GE reaches into the Rio 2016 Olympic Games. The technologies (visible and invisible) that will light,... Read More » Bringing a Digital Mindset to Manufacturing The digital age will provide manufacturing insights that will save money and transform how we work across

  13. Building America Webinar: Building America: Research for Real...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America: Research for Real-World Results Building America Webinar: Building America: Research for Real-World Results For 20 years, the U.S. Department of Energy's (DOE) Building ...

  14. Building America Research-to-Market Process

    Broader source: Energy.gov [DOE]

    The Building America Program conducts applied research, development, and deployment in residential buildings. Building America projects are led by U.S. Department of Energy (DOE) national...

  15. Building America Research Teams: Spotlight on Alliance for Residential Building Innovation (ARBI) and Building America Research Alliance (BARA)

    Broader source: Energy.gov [DOE]

    This article profiles the Building America teams, Alliance for Residential Building Innovation (ARBI) and Building America Research Alliance (BARA).

  16. Building America Webinar: Building America: Research for Real...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America: Research for Real-World Results Building America Webinar: Building America: ... I DOE ZERH Webinar: Technical Resources for Marketing and Selling Zero Energy Ready Homes

  17. Building America Research | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Building America Research The DOE Building America Program is helping to create homes that are durable and energy efficient. Research-to-Market BA_Research_Image.png Learn how Building America works to accelerate the development and adoption of advanced building energy technologies and practices. Top Innovations 1-1-2 Adv Framing open header.jpg Read about outstanding Building America research achievements. Research Teams hirl3.jpg Learn about the Building America teams who continuously

  18. Building America Webinar: Building America Research Tools | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Research Tools Building America Webinar: Building America Research Tools This webinar was held on March 18, 2015, and reviewed Building America research tools, including: Field Test Best Practices, Building Energy Optimization (BEopt) software, and the National Residential Efficiency Measures Database. These tools were created to support best practices in the building science community. Presenters and specific topics for this webinar included: * Lieko Earle and Bethany Sparn, National

  19. Building America Research Teams | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America Research Teams Building America Research Teams Building America team members are experts in the field of residential building science and have access to world-class research facilities, partners, and key personnel, ensuring successful progress toward U.S. Department of Energy (DOE) goals. These teams work with industry partners to design, test, upgrade, and build technologies and high performance homes using strategies that significantly cut energy use. Learn more about Building America

  20. Building America System Research | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System Research Building America System Research Residential Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review resbldgs01_werling_040213.pdf (3.5 MB) More Documents & Publications Solar Decathlon Multi-Function Fuel-Fired Heat Pump - 2013 Peer Review Whole Building Performance-Based Procurement Training

  1. Building America Puts Residential Research Results To Work; Building America Research That Works (Fact Sheet)

    SciTech Connect (OSTI)

    2009-01-18

    Residential buildings use more than 20% of the energy consumed annually in the United States. To help reduce that energy use, the Department of Energy (DOE) and its Building America partners conduct research to develop advanced building energy systems tha

  2. NREL: Buildings Research - Residential Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a row of homes in the distance. The NREL Residential Buildings group is an innovative, multidisciplinary team focused on accelerating the adoption of cost-effective energy...

  3. Building America Research-to-Market Plan

    SciTech Connect (OSTI)

    Werling, Eric

    2015-11-01

    This report presents the Building America Research-to-Market Plan (Plan), including the integrated Building America Technology-to-Market Roadmaps (Roadmaps) that will guide Building America’s research, development, and deployment (RD&D) activities over the coming years. The Plan and Roadmaps will be updated as necessary to adapt to research findings and evolving stakeholder needs, and they will reflect input from DOE and stakeholders.

  4. Building America Research-to-Market Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research-to-Market Plan November 2015 Prepared by Confluence Communications and Energetics Incorporated for: The Building America Program Residential Buildings Integration Building Technologies Office Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Project Manager and Technical Editor: Eric Werling Building America Program Director (This page intentionally left blank) Executive Summary i Executive Summary This report was prepared by the U.S. Department of Energy's

  5. Building America Expert Meeting: Foundations Research Results

    Broader source: Energy.gov [DOE]

    The NorthernSTAR Building America Partnership held an expert meeting on Foundations Research Results on November 15, 2011 at the University Hotel Minneapolis on the campus of the University of Minnesota in Minneapolis.

  6. Research update, existing buildings research, 1989--1991

    SciTech Connect (OSTI)

    MacDonald, J.M.; Ternes, M.P.; Mixon, W.R.; Sharp, T.R.; Kolb, J.O.; Wilkes, K.E. ); Diamond, R.C. ); Judkoff, R. ); Mazzucchi, R.P. )

    1993-02-01

    This Research Update presents the status of the Existing Buildings Research program of the Office of Building Technologies of the US Department of Energy for the period 1989-199 1. This program covers research on energy efficiency improvements for the residential and commercial buildings in this country. ne Existing Buildings Research program has contributed to significant improvements in energy efficiency of existing buildings by development of improvements to retrofit technologies, by coordinating and conducting research studies on the use of energy efficiency technologies (to reduce barriers and increase use), and by continually evaluating changes in technologies that could improve and maintain buildings energy efficiency. If the energy efficiency of the buildings sector in this country is to be dramatically improved over the next 30 years, we must improve the use of energy efficiency technologies. Improved delivery of measures, improved understanding of how buildings actually perform in the field, and methods for improving operations and maintenance of buildings and energy equipment are all examples of ways to improve the deployment (transfer) of technologies. Much has been learned about technology deployment in buildings in the first five years of the program, and our future plans will be directed at continuing the improvements and making a real contribution to the energy efficiency future of the United States.

  7. Advanced Residential Buildings Research; Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-09-01

    Factsheet describing the Advanced Residential Buildings Research group within NREL's Electricity, Resources, and Buildings Systems Integration Center.

  8. Advanced Commercial Buildings Research; Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-09-01

    Factsheet describing the Advanced Commercial Buildings Research group within NREL's Electricity, Resources, and Buildings Systems Integration Center.

  9. 2013 Building America Research Planning Meeting Summary

    SciTech Connect (OSTI)

    Metzger, C.; Hunt, S.

    2014-02-01

    The Building America Research Planning Meeting was held October 28-30, 2013, in Washington, DC. This meeting provides one opportunity each year for the research teams, national laboratories and Department of Energy (DOE) managers to meet in person to share the most pertinent information and collaboration updates. This report documents the presentations, highlights key program updates, and outlines next steps for the program.

  10. NREL's Buildings Research Honored by Architecture Magazine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL's Buildings Research Honored by Architecture Magazine For more information contact: Kerry Masson, (303) 275-4083 Golden, Colo., January 15, 1997—Architecture magazine's Progressive Architecture Award went to the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) and the Passive Solar Industries Council today for their joint efforts in designing energy-efficient buildings. The prestigious award is one of two given annually for outstanding contributions to architectural

  11. Opportunities for Building America Research to Address Energy...

    Energy Savers [EERE]

    Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope and IAQ (301) Opportunities for Building America Research to Address...

  12. ConSol (Building Industry Research Alliance) | Open Energy Information

    Open Energy Info (EERE)

    ConSol (Building Industry Research Alliance) Jump to: navigation, search Name: ConSol (Building Industry Research Alliance) Place: Stockton, CA Website: www.consol.com References:...

  13. Code Gaps and Future Research Needs of Combustion Safety: Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Code Gaps and Future Research Needs of Combustion Safety: Building America Expert Meeting Update Code Gaps and Future Research Needs of Combustion Safety: Building America Expert ...

  14. Building America Special Research Project: High-R Walls Case...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Special Research Project: High-R Walls Case Study Analysis Building America Special Research Project: High-R Walls Case Study Analysis This report considers a ...

  15. 2013 Building America Research Planning Meeting Summary

    SciTech Connect (OSTI)

    Metzger, C. E.; Hunt, S.

    2014-02-01

    The Building America (BA) Research Planning Meeting was held October 28-30, 2013, in Washington, DC. This meeting provides one opportunity each year for the research teams, national laboratories and Department of Energy (DOE) managers to meet in person to share the most pertinent information and collaboration updates. This report documents the presentations, highlights key program updates, and outlines next steps for the program.

  16. Towards SustainabilityGreen Building, Sustainability Objectives, and Building America Whole House Systems Research

    SciTech Connect (OSTI)

    none,

    2008-02-01

    This paper discusses Building America whole-house systems research within the broad effort to reduce or eliminate the environmental impact of building and provides specific recommendations for future Building America research based on Building Science Corporations experience with several recent projects involving green home building programs.

  17. Shenzhen Institute of Building Research SIBR | Open Energy Information

    Open Energy Info (EERE)

    technology research institute for buildings and urban development. The body is working on solar panel design and installation in China. References: Shenzhen Institute of Building...

  18. Building America FY14 Research Projects by Research Team | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Research Projects by Research Team Building America FY14 Research Projects by Research Team This table shows the U.S. Department of Energy Building America FY14 research projects by team. building_america_fy14projects_team.pdf (237.42 KB) More Documents & Publications Building America FY14 Projects by Building Type

  19. Building America Webinar: Building America: Research for Real-World Results

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy America: Research for Real-World Results Building America Webinar: Building America: Research for Real-World Results For 20 years, the U.S. Department of Energy's (DOE) Building America program has been a source of innovations for high performance homes. This webinar on December 17, 2014, featured Eric Werling, Building America Program Coordinator, providing an overview of key Building America accomplishments, current research focus areas, and future strategies for

  20. DOE Announces Webinars on the Buildings of the Future Research...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Buildings of the Future Research Project, O&M Best Practices for Small PV Systems, and More DOE Announces Webinars on the Buildings of the Future Research Project, O&M Best ...

  1. New TCIPG Research Program Builds on Past Successes with Nearly...

    Office of Environmental Management (EM)

    TCIPG Research Program Builds on Past Successes with Nearly 18.8 Million DOE Award New TCIPG Research Program Builds on Past Successes with Nearly 18.8 Million DOE Award A new ...

  2. Building America Program Research-to-Market Plan

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report presents the Building America Research-to-Market Plan (Plan), including the integrated Building America Technology-to-Market Roadmaps (Roadmaps) that will guide Building America’s research, development, and deployment (RD&D) activities over the coming years. The Plan and Roadmaps will be updated as necessary to adapt to research findings and evolving stakeholder needs, and they will reflect input from DOE and stakeholders. Read more in this Building America Program Research-to-Market Plan.

  3. Building America Research Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    To the right of this building is another large building shaded in gray, and to the left is a smaller structure shaded in gray. Building Energy Optimization Software (BEopt): This ...

  4. Research & Development Needs for Building-Integrated Solar Technologies |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Needs for Building-Integrated Solar Technologies Research & Development Needs for Building-Integrated Solar Technologies The Building Technologies Office (BTO) has identified Building Integrated Solar Technologies (BIST) as a potentially valuable piece of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to identify the key research and development

  5. Building America Envelope and Advanced HVAC Research | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    under the Moisture Risk Management research area of the Building America roadmap. ... - 2015 BTO Peer Review HVAC R&D Research & Development Roadmap: Emerging HVAC Technologies

  6. The Building Research Council at the University of Illinois ...

    Open Energy Info (EERE)

    Research Council at the University of Illinois Jump to: navigation, search Name: The Building Research Council at the University of Illinois Place: Champaign, IL Information About...

  7. Research on Very Low-Energy Building Operations and Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lead Performer: U.S.-China Clean Energy Research Center (CERC) - Lawrence Berkeley ... Development (MOHURD) - Beijing, China -- China Academy of Building Research - ...

  8. NREL: Buildings Research - BESTEST-EX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BESTEST-EX The Building Energy Simulation Test for Existing Homes (BESTEST-EX) is a method ... Building Physics Cases Utility Bill Calibration Cases BESTEST-EX is a test procedure that ...

  9. Building a Better Battery - Joint Center for Energy Storage Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 23, 2013, Videos Building a Better Battery Phil Ponce speaks with Director George Crabtree about the Joint Center for Energy Storage's research and initiative to build a better battery.

  10. Industry Research and Recommendations for New Commercial Buildings

    SciTech Connect (OSTI)

    Hendron, B.; Leach, M.; Gregory, N.; Pless, S.; Selkowitz, S.; Matthew, P.

    2014-05-01

    Researchers evaluated industry needs and developed logic models to support possible future commercial new construction research and deployment efforts that could be led or supported by DOE's Commercial Building Integration program or other national initiatives. The authors believe that these recommendations support a proposed course of action from the current state of commercial building energy efficiency to a possible long-term goal of achieving significant market penetration of cost-effective NZE buildings in all building sectors and climates by 2030.

  11. Building America Webinar: Building America: Research for Real-World Results

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy America: Research for Real-World Results Building America Webinar: Building America: Research for Real-World Results This presentation was delivered on Dec. 17, 2014, by Eric Werling, Building America Research Coordinator. ba_webinar_werling_12-17-14.pdf (6.19 MB) More Documents & Publications Zero Energy Ready Home Training Presentation DOE ZERH Webinar: High-Performance Home Sales Training, Part I DOE ZERH Webinar: Marketing and Sales Solutions for Zero Energy

  12. Building America Research Benchmark Definition, Updated December 2009

    SciTech Connect (OSTI)

    Hendron, Robert; Engebrecht, Cheryn

    2010-01-01

    To track progress toward aggressive multi-year, whole-house energy savings goals of 40%–70% and on-site power production of up to 30%, the U.S. Department of Energy (DOE) Residential Buildings Program and the National Renewable Energy Laboratory (NREL) developed the Building America (BA) Research Benchmark in consultation with the Building America industry teams.

  13. Building America Research Benchmark Definition: Updated December 19, 2008

    SciTech Connect (OSTI)

    Hendron, R.

    2008-12-01

    To track progress toward aggressive multi-year whole-house energy savings goals of 40-70% and onsite power production of up to 30%, DOE's Residential Buildings Program and NREL developed the Building America Research Benchmark in consultation with the Building America industry teams.

  14. Research and Development Roadmap: Windows and Building Envelope

    Broader source: Energy.gov [DOE]

    Windows and building envelope research and development is a high priority for the Building Technologies Office. This roadmap is a useful resource for public and private decision makers evaluating and pursuing high-impact R&D focused on advancing next-generation energy efficient windows and building envelope technologies.

  15. Text-Alternative Version of Building America Webinar: Research for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real-World Results | Department of Energy Research for Real-World Results Text-Alternative Version of Building America Webinar: Research for Real-World Results Building America: Research for Real-World Results December 17, 2014 Eric Werling, U.S. Department of Energy, Building America Program Gail: Hello everyone! I am Gail Werren with the National Renewable Energy Laboratory, and I'd like to welcome you to today's webinar hosted by the Building America program. We are excited to have Eric

  16. SIBYLS Beamline Builds on Nobel Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modrich used to build on his earlier work. DNA repair machinery impacts both why cancer occurs and how it is treated-the primary focus of LBNL's SBDR funding. This year's...

  17. Building America Residential Energy Efficiency Research Planning Meeting:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    October 2011 | Department of Energy Research Planning Meeting: October 2011 Building America Residential Energy Efficiency Research Planning Meeting: October 2011 On this page, you may link to the summary report and presentations for the Building America Research Planning meeting in October 2011, held in Washington, D.C. Residential Energy Efficiency Planning Meeting Summary Report (634.05 KB) More Documents & Publications Residential Energy Efficiency Research Planning Meeting Summary

  18. Building America Research Planning Meeting: November 2010 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Research Planning Meeting: November 2010 Building America Research Planning Meeting: November 2010 On this page, you may link to the summary report and presentations for the Building America Planning meeting in November 2010, held in Washington, D.C. meeting_summary_50675.pdf (1.66 MB) More Documents & Publications Summary of Prioritized Research Opportunities Challenges and Opportunities To Achieve 50% Energy Savings in Homes: National Laboratory White Papers Standing Technical

  19. Research Support Facility (RSF): Leadership in Building Performance (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-09-01

    This brochure/poster provides information on the features of the Research Support Facility including a detailed illustration of the facility with call outs of energy efficiency and renewable energy technologies. Imagine an office building so energy efficient that its occupants consume only the amount of energy generated by renewable power on the building site. The building, the Research Support Facility (RSF) occupied by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) employees, uses 50% less energy than if it were built to current commercial code and achieves the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED{reg_sign}) Platinum rating. With 19% of the primary energy in the U.S. consumed by commercial buildings, the RSF is changing the way commercial office buildings are designed and built.

  20. Building America Research Benchmark Definition, Updated December 19, 2008

    SciTech Connect (OSTI)

    Hendron, R.

    2008-12-19

    To track progress toward aggressive multi-year whole-house energy savings goals of 40-70% and onsite power production of up to 30%, DOE's Residential Buildings Program and NREL developed the Building America Research Benchmark in consultation with the Bui

  1. Research and Development Needs for Building-Integrated Solar Technologies

    SciTech Connect (OSTI)

    none,

    2014-01-01

    The Building Technologies Office (BTO) has identified Building Integrated Solar Technologies (BIST) as a potentially valuable piece of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to identify the key research and development (R&D) needs that will be required for BIST to make a substantial contribution toward that goal. BIST include technologies for space heating and cooling, water heating, hybrid photovoltaic-thermal systems (PV/T), active solar lighting, and building-integrated photovoltaics (BIPV).

  2. Research Support Facility - Zero Energy Building Moves Closer to Reality

    SciTech Connect (OSTI)

    2010-04-01

    The DOE's Research Support Facility showcases high-performance design features, passive energy strategies, and renewable energy. It is a prototype for future large-scale net-zero energy buildings.

  3. NREL: Buildings Research - Working With Us

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to learn more about the depth of our expertise. Find a Position with Us Photo of researcher Dane Christensen, wearing a red sweater, working on an energy recovery...

  4. Building America Residential Energy Efficiency Research Planning...

    Broader source: Energy.gov (indexed) [DOE]

    Research Planning meeting in October 2011, held in Washington, D.C. Residential Energy Efficiency Planning Meeting Summary Report (634.05 KB) More Documents & Publications ...

  5. Metallurgy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and metallurgical science in support of national security. Contact Us Group Leader Dane Spearing (acting) Email Deputy Group Leader Patrick Hochanadel Email Group Office...

  6. Framework for Building Collaborative Research Environment

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Devarakonda, Ranjeet; Palanisamy, Giriprakash; San Gil, Inigo

    2014-10-25

    Wide range of expertise and technologies are the key to solving some global problems. Semantic web technology can revolutionize the nature of how scientific knowledge is produced and shared. The semantic web is all about enabling machine-machine readability instead of a routine human-human interaction. Carefully structured data, as in machine readable data is the key to enabling these interactions. Drupal is an example of one such toolset that can render all the functionalities of Semantic Web technology right out of the box. Drupal’s content management system automatically stores the data in a structured format enabling it to be machine. Withinmore » this paper, we will discuss how Drupal promotes collaboration in a research setting such as Oak Ridge National Laboratory (ORNL) and Long Term Ecological Research Center (LTER) and how it is effectively using the Semantic Web in achieving this.« less

  7. Building Efficiency Technologies by Tomorrow's Engineers and Researchers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (BETTER) Capstone | Department of Energy Efficiency Technologies by Tomorrow's Engineers and Researchers (BETTER) Capstone Building Efficiency Technologies by Tomorrow's Engineers and Researchers (BETTER) Capstone Photo courtesy of Georgia Institute of Technology. Photo courtesy of Georgia Institute of Technology. Lead Performer: Georgia Institute of Technology - Atlanta, GA Partners: - Alphabet Energy - Hayward, CA - Alabama Heat Exchangers, AL - Advanced Renewable Energy - Emrgy Hydro -

  8. Industry Research and Recommendations for Small Buildings and Small Portfolios

    SciTech Connect (OSTI)

    Langner, Rois; Hendron, Bob; Pless, Shanti; Huppert, Mark; Cochrane, Ric

    2013-12-01

    Small buildings have been left behind in the energy efficiency marketplace because financial and technical resources have flowed to larger commercial buildings. DOE's Building Technologies Office works with the commercial building industry to accelerate the uptake of energy efficiency technologies and techniques in existing and new commercial buildings (DOE 2013). BTO recognizes the SBSP sector'spotential for significant energy savings and the need for investments in resources that are tailored to this sector's unique needs. The industry research and recommendations described in this report identify potential approaches and strategic priorities that BTO could explore over the next 3-5 years that will support the implementation of high-potential energy efficiency opportunities for thisimportant sector. DOE is uniquely positioned to provide national leadership, objective information, and innovative tools, technologies, and services to support cost-effective energy savings in the fragmented and complex SBSP sector. Properly deployed, the DOE effort could enhance and complement current energy efficiency approaches. Small portfolios are loosely and qualitatively defined asportfolios of buildings that include only a small number of small buildings. This distinction is important because the report targets portfolio owners and managers who generally do not have staff and other resources to track energy use and pursue energy efficiency solutions.

  9. Smart Homes and Buildings Research at the Energy Systems Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facility (Text Version) | Energy Systems Integration | NREL Smart Homes and Buildings Research at the Energy Systems Integration Facility (Text Version) This is a text version of the video "Smart Homes and Buildings Research at the Energy Systems Integration Facility." So, the big promise of the smart home is to enhance your comfort and your convenience. And at the same time, allow us to save energy. So, we're doing the right thing, but we're also more convenient and more

  10. Building America Research Benchmark Definition, Updated December 15, 2006

    SciTech Connect (OSTI)

    Hendron, R.

    2007-01-01

    To track progress toward aggressive multi-year whole-house energy savings goals of 40-70% and onsite power production of up to 30%, DOE's Residential Buildings Program and NREL developed the Building America Research Benchmark in consultation with the Building America industry teams. The Benchmark is generally consistent with mid-1990s standard practice, as reflected in the Home Energy Rating System (HERS) Technical Guidelines (RESNET 2002), with additional definitions that allow the analyst to evaluate all residential end-uses, an extension of the traditional HERS rating approach that focuses on space conditioning and hot water. Unlike the reference homes used for HERS, EnergyStar, and most energy codes, the Benchmark represents typical construction at a fixed point in time so it can be used as the basis for Building America's multi-year energy savings goals without the complication of chasing a ''moving target''.

  11. Better metallurgy for process equipment

    SciTech Connect (OSTI)

    Rayner, R.E.

    1994-01-01

    Metallurgy choices have expanded significantly for process equipment and pumps used for handling difficult corrosive fluids. If they have been specifying the austenitic AISI types 316, 316L, 317, 317L or the newer first generation alloy 329 in their pumps, there is a strong message in recent literature. Based on tests and experience there are better, often less costly alternatives. In the case of CD[sub 4]MCu, N08020 and 904L, there are lower-cost material alternatives for many applications. For SA S31254 and SA N08367, there are some less aggressive can be substituted. These alternatives are the new second generation duplex steels. The lower cost of the duplex alloys is a result of the reduced nickel content, which is about half that of the standard austenitics. Also, their carbon content is low; the same as 316L and 317L for most alloys, including S31803. The second generation duplex alloys offer significant value improvement in a vast majority of applications over the common austenitics and ferritics. Further, their improved resistance to corrosion and improved physical properties relative to the expensive. and in many cases proprietary, highly corrosion-resistant, super-ferritics and super-austenitics, means that they can and should be considered as an alternative for applications where those materials are now overqualified. Strength, toughness and wide corrosion resistance are all-important properties and considerations for process pump materials. Combine these with competitive cost and there is an opportunity that must be investigated.

  12. Building America … ORNL R&D: HVAC Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America - ORNL R&D: HVAC Research 2015 Building Technologies Office Peer Review Jeffrey Munk, munkjd@ornl.gov Oak Ridge National Laboratory Philip Boudreaux, Roderick Jackson, Wale Odukomaiya Project Summary Timeline: Start date: 10/1/2013 Planned end date: 9/30/2014 Key Milestones 1. Heating Performance Curves; 4/15/2014 2. Cooling Performance Curves; 7/15/2014 3. Final Report w/Sizing Guidelines; 2/28/2015 Budget: Total DOE $ to date: $200k Total future DOE $: $ 0 Target

  13. The implications of future building scenarios for long-term building energy research and development

    SciTech Connect (OSTI)

    Flynn, W.T.

    1986-12-01

    This report presents a discussion of alternative future scenarios of the building environment to the year 2010 and assesses the implications these scenarios present for long-term building energy R and D. The scenarios and energy R and D implications derived from them are intended to serve as the basis from which a strategic plan can be developed for the management of R and D programs conducted by the Office of Buildings and Community Systems, US Department of Energy. The scenarios and analysis presented here have relevance not only for government R and D programs; on the contrary, it is hoped that the results of this effort will be of interest and useful to researchers in both private and public sector organizations that deal with building energy R and D. Making R and D decisions today based on an analysis that attempts to delineate the nexus of events 25 years in the future are clearly decisions made in the face of uncertainty. Yet, the effective management of R and D programs requires a future-directed understanding of markets, technological developments, and environmental factors, as well as their interactions. The analysis presented in this report is designed to serve that need. Although the probability of any particular scenario actually occurring is uncertain, the scenarios to be presented are sufficiently robust to set bounds within which to examine the interaction of forces that will shape the future building environment.

  14. Commercial Building Energy Asset Rating Program -- Market Research

    SciTech Connect (OSTI)

    McCabe, Molly J.; Wang, Na

    2012-04-19

    Under contract to Pacific Northwest National Laboratory, HaydenTanner, LLC conducted an in-depth analysis of the potential market value of a commercial building energy asset rating program for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy. The market research objectives were to: (1) Evaluate market interest and need for a program and tool to offer asset rating and rapidly identify potential energy efficiency measures for the commercial building sector. (2) Identify key input variables and asset rating outputs that would facilitate increased investment in energy efficiency. (3) Assess best practices and lessons learned from existing national and international energy rating programs. (4) Identify core messaging to motivate owners, investors, financiers, and others in the real estate sector to adopt a voluntary asset rating program and, as a consequence, deploy high-performance strategies and technologies across new and existing buildings. (5) Identify leverage factors and incentives that facilitate increased investment in these buildings. To meet these objectives, work consisted of a review of the relevant literature, examination of existing and emergent asset and operational rating systems, interviews with industry stakeholders, and an evaluation of the value implication of an asset label on asset valuation. This report documents the analysis methodology and findings, conclusion, and recommendations. Its intent is to support and inform the DOE Office of Energy Efficiency and Renewable Energy on the market need and potential value impacts of an asset labeling and diagnostic tool to encourage high-performance new buildings and building efficiency retrofit projects.

  15. Seismic Safety Margins Research Program (Phase I). Project IV. Structural building response; Structural Building Response Review

    SciTech Connect (OSTI)

    Healey, J.J.; Wu, S.T.; Murga, M.

    1980-02-01

    As part of the Phase I effort of the Seismic Safety Margins Research Program (SSMRP) being performed by the University of California Lawrence Livermore Laboratory for the US Nuclear Regulatory Commission, the basic objective of Subtask IV.1 (Structural Building Response Review) is to review and summarize current methods and data pertaining to seismic response calculations particularly as they relate to the objectives of the SSMRP. This material forms one component in the development of the overall computational methodology involving state of the art computations including explicit consideration of uncertainty and aimed at ultimately deriving estimates of the probability of radioactive releases due to seismic effects on nuclear power plant facilities.

  16. NREL: Wind Research - Building 251 and High Bay

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building 251 and High Bay Photo of an aerial shot of a large blue and grey building with parking lot and cars in the foreground. Building 251 at the NWTC houses administrative and...

  17. Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Historically, only Industrial Facilities (ISO 50003 Industry - light to medium and ... is allowing Commercial Buildings (ISO 50003 - Buildings and Building Complexes) ...

  18. Building America Special Research Project: High-R Walls Case...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2009 Building Science Press All rights of ... insulation levels in many new and existing buildings. ... The author and publisher make no warranty of any kind, ...

  19. Building Thermal Envelope Systems and Materials (BTESM) and research utilization/technology transfer progress report for DOE (Department of Energy) Office of Buildings Energy Research

    SciTech Connect (OSTI)

    Burn, G.

    1990-08-01

    The Monthly Report of the Building Thermal Envelope Systems and Materials (BTESM) Program is a monthly update of both in-house ORNL projects and subcontract activities in the research areas of building materials, wall systems, foundations, roofs, building diagnostics, and research utilization and technology transfer. Presentations are not stand-alone paragraphs every month. Their principal values are the short-time lapse between accomplishment and reporting and their evolution over a period of several months.

  20. Building America Webinar: Building America: Research for Real-World Results

    Broader source: Energy.gov [DOE]

    For 20 years, the U.S. Department of Energy’s (DOE) Building America program has been a source of innovations for high performance homes. Join Eric Werling, Building America Program Coordinator,...

  1. Buildings of the Future Research Project Launch and Virtual Panel Discussion on Building Technology Trends

    Broader source: Energy.gov [DOE]

    Learn more about the DOE's Buildings of the Future Project. Buildings will no longer be passive objects that consume resources, but rather active participants engaged in the energy system and our community.

  2. Building America: Research for Real-World Results

    Broader source: Energy.gov [DOE]

    For 20 years, the U.S. Department of Energy’s Building America program has been a source of innovations for high performance homes. Join Eric Werling, Building America Program Coordinator, and Sam...

  3. US India Joint Center for Building Energy Research and Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Controls and Communications Integration 2015 Building Technologies Office Peer Review ... Key Partners: Institutional Industry International Institute of Information Technology ...

  4. Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope and IAQ (301)

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope and IAQ (301), call slides and discussion summary.

  5. Building America Systems Integration Research Annual Report: FY 2012

    SciTech Connect (OSTI)

    Gestwick, M.

    2013-05-01

    This document is the Building America FY2012 Annual Report, which includes an overview of the Building America Program activities and the work completed by the National Renewable Energy Laboratory and the Building America industry consortia (the Building America teams). The annual report summarizes major technical accomplishments and progress towards U.S. Department of Energy Building Technologies Program's multi-year goal of developing the systems innovations that enable risk-free, cost effective, reliable and durable efficiency solutions that reduce energy use by 30%-50% in both new and existing homes.

  6. Building America Systems Integration Research Annual Report. FY 2012

    SciTech Connect (OSTI)

    Gestwick, Michael

    2013-05-01

    This Building America FY2012 Annual Report includes an overview of the Building America Program activities and the work completed by the National Renewable Energy Laboratory and the Building America industry consortia (the Building America teams). The annual report summarizes major technical accomplishments and progress towards U.S. Department of Energy Building Technologies Program's multi-year goal of developing the systems innovations that enable risk-free, cost effective, reliable and durable efficiency solutions that reduce energy use by 30%-50% in both new and existing homes.

  7. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2004-09-14

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  8. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-07-29

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  9. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-19

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  10. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-26

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  11. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-01-25

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  12. Biaxially textured articles formed by power metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-26

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  13. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goval, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-06-07

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  14. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-05-10

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  15. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2004-09-28

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  16. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-05

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of ternary mixtures consisting of: Ni powder, Cu powder, and Al powder, Ni powder, Cr powder, and Al powder; Ni powder, W powder and Al powder; Ni powder, V powder, and Al powder; Ni powder, Mo powder, and Al powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  17. Research & Development Needs for Building-Integrated Solar Technologie...

    Broader source: Energy.gov (indexed) [DOE]

    of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to ...

  18. Research Support Facility (RSF): Leadership in Building Performance...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... The RSF data center is highly efficient with many unique features, including: * Hot aisle containment * Reuse of data\tcenter waste heat to preheat building ventilation * Hybrid ...

  19. US India Joint Center for Building Energy Research and Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (CBERD) : Controls and Communications Integration 2014 Building Technologies Office Peer ... web-based interfaces (Summer 2017) International Institute of Information Technology ...

  20. Building America Research Teams: Spotlight on ARIES and NorthernSTAR |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy ARIES and NorthernSTAR Building America Research Teams: Spotlight on ARIES and NorthernSTAR May 14, 2015 - 12:36pm Addthis This article continues our series of profiles about the Building America research teams-multidisciplinary industry partnerships that work to make high performance homes a reality for all Americans. This month's article focuses on Advanced Residential Integrated Energy Solutions and NorthernSTAR Building America Partnership-leaders in research and

  1. Building America Research: Part I – Update and Outlook Webinar (Text Version)

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar "Building America Research: Part I – Update and Outlook," presented in August 2016. Watch the video.

  2. Building Technologies Program Multi-Year Program Plan Research and Development 2008

    SciTech Connect (OSTI)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for research and development, including residential and commercial integration, lighting, HVAC and water heating, envelope, windows, and analysis tools.

  3. Building America Webinar: Advanced Envelope Research for Factory-Built Housing

    Broader source: Energy.gov [DOE]

    This webinar was conducted on December 14, 2011, by the ARIES Collaborative, a U.S. Department of Energy Building America research team.

  4. Design-Build Process for the Research Support Facility (RSF) (Book)

    SciTech Connect (OSTI)

    Not Available

    2012-06-01

    An in-depth look at how the U.S. DOE and NREL used a performance-based design-build contract to build the Research Support Facility (RSF); one of the most energy efficient office buildings in the world.

  5. Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope & IAQ (301)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exchange Call Series: Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope & IAQ (301) July 21, 2015 Call Slides and Discussion Summary Agenda  Call Logistics and Introductions  Opening Polls  Residential Network and Peer Exchange Call Overview  Introduction to Building America Technology to Market Roadmaps  Eric Werling, Building America Program Director, DOE Building Technologies Office  Questions, Discussion, and

  6. EM Begins Demolition of Building G2 at Separations Process Research Unit |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Begins Demolition of Building G2 at Separations Process Research Unit EM Begins Demolition of Building G2 at Separations Process Research Unit July 18, 2016 - 12:00pm Addthis NISKAYUNA, N.Y. - EM's cleanup contractor at the Separations Process Research Unit (SPRU) nuclear facility completed preparations allowing for the open-air demolition of Building G2, which has begun. G2 is one of two SPRU buildings that supported improvements in the chemical separation of plutonium

  7. Building America Research Benchmark Definition: Updated December 2009

    SciTech Connect (OSTI)

    Hendron, R.; Engebrecht, C.

    2010-01-01

    The Benchmark represents typical construction at a fixed point in time so it can be used as the basis for Building America's multi-year energy savings goals without chasing a 'moving target.'

  8. Building America Special Research Project: High-R Walls Case Study Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Building America Special Research Project: High-R Walls Case Study Analysis Building America Special Research Project: High-R Walls Case Study Analysis This report considers a number of promising wall systems with improved thermal control to improve plant-wide performance. Unlike previous studies, it considers performance in a more realistic matter, including some true three-dimensional heat flow and the relative risk of moisture damage. Building America Special

  9. New Construction Jobs Begin as Argonne Builds New Energy Research Facility

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Construction Jobs Begin as Argonne Builds New Energy Research Facility New Construction Jobs Begin as Argonne Builds New Energy Research Facility June 3, 2011 - 2:08pm Addthis Senator Richard Durbin, University of Chicago President Robert Zimmer, Secretary Chu, and Argonne Director Eric Isaacs break ground for the new Energy Sciences Building. | Photo Courtesy of Argonne National Laboratory Senator Richard Durbin, University of Chicago President Robert Zimmer,

  10. Building Thermal Envelope Systems and Materials (BTESM) and research utilization/technology transfer

    SciTech Connect (OSTI)

    Burn, G.

    1990-07-01

    The Monthly Report of the Building Thermal Envelope Systems and Materials (BTESM) Programs is a monthly update of both in-house ORNL projects and subcontract activities in the research areas of building materials, wall systems, foundations, roofs, building diagnostics, and research utilization and technology transfer. Presentations are not stand-alone paragraphs every month. Their principal values are the short-time lapse between accomplishment and reporting and their evolution over a period of several months..

  11. U.S.-India Centre for Building Energy Research and Development (CBERD) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy -India Centre for Building Energy Research and Development (CBERD) U.S.-India Centre for Building Energy Research and Development (CBERD) Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA Partners: -- Centre for Environmental Planning and Technology University (CEPT University) - Ahmedabad, India -- Oak Ridge National Laboratory - Oak Ridge, TN -- University of California - Berkeley, CA -- Carnegie Mellon University - Pittsburgh, PA -- Multiple

  12. Building system integration research: recommendations for a US Department of Energy multiyear program plan

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    This plan describes the scope, technical content, and resources required to conduct the Building System Integration (BSI) research program during FY 1987 through 1991. System integration research is defined, the need for the research is discussed, its benefits are outlined, and the history of building system integration research is summarized. The program scope, the general approach taken in developing this program plan, and the plan's contents are also described.

  13. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-10-21

    A strengthened, biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed, compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: Ni, Ag, Ag--Cu, Ag--Pd, Ni--Cu, Ni--V, Ni--Mo, Ni--Al, Ni--Cr--Al, Ni--W--Al, Ni--V--Al, Ni--Mo--Al, Ni--Cu--Al; and at least one fine metal oxide powder; the article having a grain size which is fine and homogeneous; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  14. Palladium metallurgy and cold fusion; Some remarks

    SciTech Connect (OSTI)

    Murr, L.E. )

    1990-04-01

    In this paper the recent confusion surrounding claims for the observation of cold fusion involving palladium electrodes in electrochemical cells containing deuterium might be clarified to some extent if the palladium metallurgy, particularly in the context of fundamental microstructures, are accurately defined. Both the palladium/hydrogen and palladium/deuterium systems have been extensively investigated, and it is asserted more than two decades ago that the palladium/hydrogen system was perhaps the most extensively, experimentally investigated metal/gas system. Ordinary hydrogen absorbed in palladium fused to form helium, while in the 1940's Wilner actually observed the fusion reaction at the center of the current cold fusion controversy: d + d {yields} {sup 3}He + n (where d = {sup 2}H represents a deuteron, and n is a neutron). In the experiment by Wilner, a deuterium-saturated palladium sheet was bombarded with accelerated deuterons. The product neutrons (n) were slowed by paraffin wax and detected by the activation of silver.

  15. Building America Systems Integration Research Annual Report: FY12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    America » Tools & Resources » Building America Climate-Specific Guidance Building America Climate-Specific Guidance Marine Hot-Humid Hot-Dry/Mixed-Dry Mixed-Humid Cold/Very Cold Click on the map to access case studies in specific climate regions or visit the All Climates page to see technology-specific case studies applicable to all climate zones. 2015 Housing Innovation Awards! See the 2015 Housing Innovation Award winners-industry leaders who represent the very best in innovation on the

  16. Building

    U.S. Energy Information Administration (EIA) Indexed Site

    DIV. Electricity Consumption and Expenditure Intensities by Census Division, 1999" ,"Electricity Consumption",,,"Electricity Expenditures" ,"per Building (thousand kWh)","per...

  17. Building America System Research Results. Innovations for High Performance Homes

    SciTech Connect (OSTI)

    none,

    2006-05-01

    This report provides a summary of key lessons learned from the first 10 years of the Building America program and also included a summary of the future challenges that must be met to reach the program’s long term performance goals.

  18. Experimental plan for investigating building-earth heat transfer at the Joint Institute for Heavy Ion Research Building

    SciTech Connect (OSTI)

    Childs, K.W.

    1980-11-01

    An experimental plan is presented for investigating heat transfer between below-grade portions of building envelopes and the surrounding soil. Included is a detailing of data to be collected at an earth-sheltered structure (Joint Institute for Heavy Ion Research Building) to be constructed at Oak Ridge National Laboratory. The attributes of the required data collection instrumentation are defined and a program to assure the accuracy of the collected data is discussed. The experimental plan is intended to be used as a guide to selection, installation, and maintenance of instrumentation as well as in data collection and verification.

  19. Research and Development Needs for Building-Integrated Solar Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Development Needs for Building-Integrated Solar Technologies January 2014 NOTICE This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information,

  20. Building.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plant in ITER refers to plant systems located outside the Tokamak Building. A thick wall ... The cooling water system provides for the rejection of heat from a variety of ITER systems ...

  1. Research Support Facility - Zero Energy Building Moves Closer to Reality (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-04-01

    The DOE's Research Support Facility showcases high-performance design features, passive energy strategies, and renewable energy. It is a prototype for future large-scale net-zero energy buildings.

  2. Energy Department Announces $5 Million for Residential Building Energy Efficiency Research and University-Industry Partnerships

    Broader source: Energy.gov [DOE]

    The Energy Department today announced a $5 million investment to develop and demonstrate new residential energy efficiency solutions, and that will support building energy efficiency research at universities and colleges.

  3. Building America Research Teams: BSC and CARB—20 Years of Advancing High Performance Homes

    Broader source: Energy.gov [DOE]

    In this article, we continue our series of profiles on the Building America research teams—multidisciplinary industry partnerships who work to make high performance homes a reality for all Americans.

  4. Building America Research Teams: BA-PIRC and IBACOS—Pioneers in Homebuilding Innovation

    Broader source: Energy.gov [DOE]

    This article continues our series of profiles about the Building America research teams—multidisciplinary industry partnerships that work to make high performance homes a reality for all Americans....

  5. Building America Webinar: Advanced Envelope Research for Factory...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Envelope Research for Factory-Built Housing ARIES lab houses. Photo courtesy of The Levy Partnership, Inc. Integrated Design: A High-Performance Solution for Affordable ...

  6. PEV Grid Integration Research: Vehicles, Buildings, and Renewables...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Focus Areas o Managed charging systems providing flexibility, demand response capability o Bi-directional power to minimize local demand charge and grid ...

  7. Building America Expert Meeting: Advanced Envelope Research for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This report provides information about the expert meeting on advanced envelope research for factory built housing, hosted by the ARIES Collaborative on October 11, 2011, in Phoenix...

  8. US India Joint Center for Building Energy Research and Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... open source software. Lessons Learned: International collaborative research projects require a lot of coordination. 12 Project Integration and Collaboration Project Integration: * ...

  9. U.S.…India Joint Center for Buildings Energy Research and Development (CBERD)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -India Joint Center for Buildings Energy Research and Development (CBERD): Simulation & Modeling 2014 Building Technologies Office Peer Review CBERD promotes innovation in energy efficiency through collaborative research, contributing to significant reduction in energy use in both nations. Philip Haves, phaves@lbl.gov Lawrence Berkeley National Laboratory Project Summary Timeline: Start date: 10/1/2012 Planned end date: 9/30/2017 Key Milestones 1. Beta version of code compliance tool;

  10. Summary of Prioritized Research Opportunities. Building America Planning Meeting, November 2-4, 2010

    SciTech Connect (OSTI)

    none,

    2011-02-01

    This report outlines the results of brainstorming sessions conducted at the Building America Fall 2010 planning meeting, in which research teams and national laboratories identified key research priorities to incorporate into multi-year planning, team research agendas, expert meetings, and technical standing committees.

  11. EIS-0350-S1: Draft Supplemental Environmental Impact Statement...

    Energy Savers [EERE]

    Nuclear Facility Portion of the Chemistry and Metallurgy Research Building ... within DOE, proposes to complete the Chemistry and Metallurgy Research Building ...

  12. EIS-0350-S1: Final Supplemental Environmental Impact Statement...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nuclear Facility Portion of the Chemistry and Metallurgy Research Building ... within DOE, proposes to complete the Chemistry and Metallurgy Research Building ...

  13. Environmental assessment for the proposed CMR Building upgrades at the Los Alamos National Laboratory, Los Alamos, New Mexico. Final document

    SciTech Connect (OSTI)

    NONE

    1997-02-04

    In order to maintain its ability to continue to conduct uninterrupted radioactive and metallurgical research in a safe, secure, and environmentally sound manner, the US Department of Energy (DOE) proposes to upgrade the Los Alamos National Laboratory (LANL) Chemistry and Metallurgy Research (CMR) Building. The building was built in the early 1950s to provide a research and experimental facility for analytical chemistry, plutonium and uranium chemistry, and metallurgy. Today, research and development activities are performed involving nuclear materials. A variety of radioactive and chemical hazards are present. The CMR Building is nearing the end of its original design life and does not meet many of today`s design codes and standards. The Proposed Action for this Environmental Assessment (EA) includes structural modifications to some portions of the CMR Building which do not meet current seismic criteria for a Hazard Category 2 Facility. Also included are upgrades and improvements in building ventilation, communications, monitoring, and fire protection systems. This EA analyzes the environmental effects of construction of the proposed upgrades. The Proposed Action will have no adverse effects upon agricultural and cultural resources, wetlands and floodplains, endangered and threatened species, recreational resources, or water resources. The Proposed Action would have negligible effects on human health and transportation, and would not pose a disproportionate adverse health or environmental impact on minority or low-income populations within an 80 kilometer (50 mile) radius of the CMR Building.

  14. Building a Bright Future. The Hydro Research Foundation's Fellowship Program

    SciTech Connect (OSTI)

    Vaughn, Brenna; Linke, Deborah M.

    2015-12-29

    The Hydro Fellowship Program (program) began as an experiment to discover whether the hydropower industry could find mechanisms to attract new entrants through conducting relevant research to benefit the industry. This nationwide, new-to-the-world program was started through funding from the Wind and Water Power Technologies Office of the Energy Efficiency and Renewable Energy (EERE) Office of the Department of Energy (DOE). Between 2010-2015, the Hydro Research Foundation (HRF) designed and implemented a program to conduct valuable research and attract new entrants to the hydro workforce. This historic grant has empowered and engaged industry members from 25 organizations by working with 91 students and advisors at 24 universities in 19 states. The work funded answered pressing research needs in the fields of civil, mechanical, environmental, and electrical engineering, as well as law, energy engineering and materials innovation. In terms of number of individuals touched through funding, 148 individuals were supported by this work through direct research, mentorship, oversight of the work, partnerships and the day-to-day program administration. Based on the program results, it is clear that the funding achieved the hoped-for outcomes and has the capacity to draw universities into the orbit of hydropower and continue the conversation about industry research and development needs. The Foundation has fostered unique partnerships at the host universities and has continued to thrive with the support of the universities, advisors, industry and the DOE. The Foundation has demonstrated industry support through mentorships, partnerships, underwriting the costs and articulating the universities’ support through in-kind cost sharing. The Foundation recommends that future work be continued to nurture these graduate level programs using the initial work and improvements in the successor program, the Research Awards Program, while stimulating engagement of academia at the

  15. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Cold Climates

    SciTech Connect (OSTI)

    Building Industry Research Alliance; Building Science Consortium; Consortium for Advanced Residential Buildings; Florida Solar Energy Center; IBACOS; National Renewable Energy Laboratory

    2006-08-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in Cold Climates on a cost-neutral basis.

  16. Research on Very Low‐Energy Building Operations and Management Methods

    Broader source: Energy.gov [DOE]

    Lead Performer: U.S.-China Clean Energy Research Center (CERC) Project Partners: -- Center of Science and Technology of Construction (CSTC), Ministry of Housing and Urban-Rural Development (MOHURD) - Beijing, China -- China Academy of Building Research - Bejing, China -- Sustainable Energy Partnerships (SEP) - San Francisco, CA

  17. Consumer decision and behavior research agenda for the Office of Building and Community Systems

    SciTech Connect (OSTI)

    Mohler, B.L.; Scheer, R.M.; Barnes, V.

    1985-12-01

    This report presents a research agenda of Consumer Decision and Behavior Projects related to improving, facilitating and planning Building and Community Systems, (BCS) research and development activities. Information for developing this agenda was gathered through focus group and depth interviews with BCS staff, directors and program managers.

  18. Building better microbatteries: from fundamental research to manufacturing

    SciTech Connect (OSTI)

    Xiao, Jie; Deng, Zhiqun; Carlson, Thomas J.; Eppard, Matthew B.

    2014-03-31

    The Endangered Species Act requires actions that improve the passage and survival rates for migrating salmonoids and other fish species that sustain injury and mortality when passing through hydroelectric dams. To develop a low-cost revolutionary acoustic transmitter that may be injected instead of surgically implanted into the fish, one major challenge that needs to be addressed is the micro-battery power source. This work focuses on the design and fabrication of micro-batteries for injectable fish tags. High pulse current and required service life have both been achieved as well as doubling the gravimetric energy density of the battery. The newly designed micro-batteries have intrinsically low impedance, leading to significantly improved electrochemical performances at low temperatures as compared with commercial SR416 batteries. Successful field trial by using the micro-battery powered transmitters injected into fish has been demonstrated, providing an exemplary model of transferring fundamental research into practical devices with controlled qualities.

  19. DOE Commercial Building Energy Asset Rating: Market Research and Program Direction

    SciTech Connect (OSTI)

    Wang, Na; Taylor, Cody; McCabe, Molly J.

    2012-08-12

    This paper presents the development of a voluntary energy asset rating system, to evaluate the physical characteristics and as-built energy efficiency of new and existing commercial buildings. The energy asset rating system is intended to enable commercial building stakeholders to directly compare expected as-built energy performance among similar buildings and to analyze the potential for capital improvements to increase energy efficiency cost-effectively. Market research has been performed to understand the market demand and how to communicate energy and cost savings to owners, investors, financiers, and others to overcome market barriers and motivate capital investment in building energy efficiency. The paper discusses the findings of the market research. Building owners are concerned about redundancy, conflicting requirements, and cost. They also pointed out a data gap and desire a rating program that identifies improvement opportunities. A meaningful linkage between the energy asset rating and other rating systems is essential. Based on the findings, criteria for a successful energy asset rating program have been developed to direct the program design, including validity of ratings, actionable, cost effective recommendations, effective quality control, integration with other rating systems, and necessary training and education. In addition to the rating system, an asset rating tool is being developed to reduce cost and increase standardization, allowing for consistent and reliable comparisons among and between buildings. The asset rating tool is the first step in the process by which owners can enter information about their building structure and receive information on the buildings modeled performance and recommended efficiency measures.

  20. Building America Technology Solutions for New and Existing Homes: Cold Climate Foundation Wall Hygrothermal Research Facility (Fact Sheet)

    Broader source: Energy.gov [DOE]

    This case study describes the research conducted at the University of Minnesota’s Cloquet Residential Research Facility (CRRF) in northern Minnesota, which features more than 2,500 ft2 of below-grade space for building systems foundation hygrothermal research. Here, the NorthernSTAR Building America Partnership team researches ways to improve the energy efficiency of the building envelope, including wall assemblies, basements, roofs, insulation, and air leakage.

  1. New TCIPG Research Program Builds on Past Successes with Nearly $18.8

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Million DOE Award | Department of Energy TCIPG Research Program Builds on Past Successes with Nearly $18.8 Million DOE Award New TCIPG Research Program Builds on Past Successes with Nearly $18.8 Million DOE Award A new award of nearly $18.8 million over a five-year period from the Department of Energy (DOE) and contributions from the Department of Homeland Security (DHS) will fund the new Trustworthy Cyber Infrastructure for the Power Grid (TCIPG) project, an expanded effort of the current

  2. Ars Technica: Finding Smart Ways to Build Smart Things | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Finding Smart Ways to Build Smart Things Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Ars Technica: Finding Smart Ways to Build Smart Things Ars Technica visited GE's Global Research Center in Munich to discover the innovative research being done at the facility. Watch a video of Ars Technica's visit below: You Might

  3. #F1:Research on Very Low-Energy Building O&M Methods

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    #F1:Research on Very Low-Energy Building O&M Methods 2014 Building Technologies Office Peer Review Carolyn Szum, carolyn.szum@icfi.com ICF International Project Summary Timeline: Start date: 1/1/2011 Planned end date: 12/31/2015 Key Milestones 1. Completed energy benchmarking tools for hotels and commercial offices in China; 12/31/2012 2. Published research paper on construction, equipment, EE technology, and O&M characteristics of very low-energy hotels; 12/31/2013 Budget: Total DOE $

  4. Pipeline failure: The roles played by corrosion, flow and metallurgy

    SciTech Connect (OSTI)

    Paisley, D.; Barrett, N.; Wilson, O.

    1999-11-01

    Carbon dioxide corrosion has been widely studied in the field and laboratory. It is recognized that flow regime and metallurgy are important factors that influence in-situ corrosion rates but there are relatively few documented case studies that are able to separate the individual contributions of corrosion, flow regime and metallurgy on the observed corrosion damage. This paper deals with failure of a pipeline where high quality inspection data together with comprehensive as-built records and stable production conditions allowed the separate influences of flow and metallurgy on corrosion to be studied. The flow regimes in the pipeline ranged from low velocity, stratified flow to high velocity, slug flow. The inspection data showed that the affect of turbulent flow was to increase the frequency of corrosion pits and, in the case of weld corrosion, the mean corrosion rate. The pipeline was constructed from two grades of steel and welded using two types of welding consumable. One grade of pipeline steel corroded at a significantly higher rate and with a higher frequency of corrosion pits than another, apparently similar steel. However, no significant relationship was found between weld metallurgy and corrosion rate or frequency.

  5. Tour Brookhaven Lab's Future Hub for Energy Research: The Interdisciplinary Science Building

    ScienceCinema (OSTI)

    Gerry Stokes; Jim Misewich

    2013-07-19

    Construction is under way for the Interdisciplinary Science Building (ISB), a future world-class facility for energy research at Brookhaven Lab. Meet two scientists who will develop solutions at the ISB to tackle some of the nation's energy challenges, and tour the construction site.

  6. Improving Building Energy Simulation Programs Through Diagnostic Testing (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market. Reducing the energy use of existing homes in the United States offers significant energy-saving opportunities, which can be identified through building simulation software tools that calculate optimal packages of efficiency measures. To improve the accuracy of energy analysis for residential buildings, the National Renewable Energy Laboratory's (NREL) Buildings Research team

  7. Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Appliances

    SciTech Connect (OSTI)

    Zogg, Robert; Goetzler, William; Ahlfeldt, Christopher; Hiraiwa, Hirokazu; Sathe, Amul; Sutherland, Timothy

    2009-12-01

    This study characterizes and assesses the appliances used in commercial buildings. The primary objectives of this study were to document the energy consumed by commercial appliances and identify research, development and demonstration (RD&D) opportunities for efficiency improvements, excluding product categories such as HVAC, building lighting, refrigeration equipment, and distributed generation systems. The study included equipment descriptions, characteristics of the equipment’s market, national energy consumption, estimates of technical potential for energy-saving technologies, and recommendations for U.S. Department of Energy programs that can promote energy savings in commercial appliances.

  8. Review of Metals in Past Societies: A Global Perspective on Indigenous African Metallurgy by Shadreck Chirikure, Springer, 2015

    SciTech Connect (OSTI)

    Devanathan, Ram

    2015-10-01

    This slim book (166 pages) shines a spotlight on pre-industrial African metallurgy, its global connections, and anthropological implications. It integrates seemingly disparate disciplines, such as history, geology, ethnography, archeology, and metallurgy, to illustrate the diversity and innovation in metallurgy across Africa and the role of metals in the rise of socio-economic inequalities and political power. The book has 7 chapters and the focus on metals as enablers of human needs and wants is evident in each chapter. The first chapter presents the context of the work and data sources. The second chapter focuses on the origin and development of mining and metallurgy in pre-industrial Africa. Chapter 3 is dedicated to the interaction of nature and culture in the process of mining. Chapter 4 deals with the transformation of the ore into metal by smelting and the sociocultural aspects of this process. Chapter 5 explores the social and cultural roles acquired by metals as a result of fabrication into objects. Chapter 6 examines the social role of metals, trade in metals, cultural contact, proto-globalization, and technology transfer. Finally, Chapter 7 draws lessons for global anthropology from the African experience. The sources of information are adequately cited and the long list of references at the end of each chapter will be a boon to researchers in this field. The author highlights the cultural aspects and social context of the adoption of metallurgy in Africa while drawing parallels between practices in pre-industrial Africa and those in other parts of the world. The book is peppered with delightful vignettes that offer insights into the process of transforming nature into culturally significant objects. For instance, African miners, like their counterparts in Nepal and Latin America, called upon deities, spirits and ancestors to mediate between nature and humans. Women had distinct roles in this process, but there were variations in these roles and in the

  9. Windows and Building Envelope Research and Development: A Roadmap for Emerging Technologies

    SciTech Connect (OSTI)

    none,

    2014-02-01

    This Building Technologies Office (BTO) Research and Development (R&D) Roadmap identifies priority windows and building envelope R&D areas of interest. Cost and performance targets are identified for each key R&D area. The roadmap describes the technical and market challenges to be overcome, R&D activities and milestones, key stakeholders, and potential energy savings that could result if cost and performance targets are met. Methods for improving technology performance and specific strategies for reducing installed costs and mitigating any other market barriers, which would increase the likelihood of mass-market technology adoption, are identified. This roadmap is a useful resource for public and private decision makers evaluating and pursuing high-impact R&D focused on advancing next-generation energy efficient windows and building envelope technologies.

  10. EIS-0350: Record of Decision

    Broader source: Energy.gov [DOE]

    Chemistry and Metallurgy Research Building Replacement, Los Alamos National Laboratory, Los Alamos, New Mexico

  11. EIS-0350: DOE Notice of Availability of the Draft Environmental Impact Statement

    Broader source: Energy.gov [DOE]

    Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, Los Alamos, New Mexico

  12. EIS-0350: Final Environmental Impact Statement

    Broader source: Energy.gov [DOE]

    Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, Los Alamos, New Mexico

  13. EIS-0350: Draft Environmental Impact Statement

    Broader source: Energy.gov [DOE]

    Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, Los Alamos, New Mexico

  14. EIS-0350-SA-01: Supplement Analysis

    Broader source: Energy.gov [DOE]

    Chemistry and Metallurgy Research Building Replacement (CMRR) Project at Los Alamos National Laboratory, Los Alamos

  15. Powder Metallurgy Fabrication of Molybdenum Accelerator Target Disks

    SciTech Connect (OSTI)

    Lowden, Richard Andrew; Kiggans Jr., James O.; Nunn, Stephen D.; Parten, Randy J.

    2015-12-01

    Powder metallurgy approaches for the fabrication of accelerator target disks are being examined to support the development of Mo-99 production by NorthStar Medical Technologies, LLC. An advantage of powder metallurgy is that very little material is wasted and at present, dense, quality parts are routinely produced from molybdenum powder. The proposed targets, however, are thin wafers, 29 mm in diameter with a thickness of 0.5 mm, with very stringent dimensional tolerances. Although tooling can be machined to very high tolerance levels, the operations of powder feed, pressing and sintering involve complicated mechanisms, each of which affects green density and shrinkage, and therefore the dimensions and shape of the final product. Combinations of powder morphology, lubricants and pressing technique have been explored to produce target disks with minimal variations in thickness and little or no distortion. In addition, sintering conditions that produce densities for optimum target dissolvability are being determined.

  16. Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Appliances

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Appliances December 2009 i NOTICE This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the

  17. The energy investment decision in the nonresidential building sector: Research into the areas of influence

    SciTech Connect (OSTI)

    Harkreader, S.A.; Ivey, D.L.

    1987-04-01

    The purpose of this report is to describe and to characterize the decision process in the nonresidential building sector as well as the variables influencing energy investment decisions, both of which impact the development of R and D agendas for the Office of Building and Community Systems (BCS). The report reviews the available information on the factors that influence energy investment decisions and identifies information gaps where additional research is needed. This report focuses on variables and combinations of these variables (descriptive states) that influence the non residential energy investment decision maker. Economic and demographic descriptors, energy investment decision maker characteristics, and variables affecting energy investments are identified. This response examines the physical characteristics of buildings, characteristics of the legal environment surrounding buildings, demographic factors, economic factors, and decision processes, all of which impact the nonresidential energy investment market. The emphasis of the report is on providing possible methodologies for projecting the future of the nonresidential energy investment market, as well as, collecting the data necessary for such projections. The use of alternate scenarios is suggested as a projection tool and suggestions for collecting the appropriate data are made in the recommendations.

  18. Building America Webinar: Ventilation in Multifamily Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ventilation in Multifamily Buildings Building America Webinar: Ventilation in Multifamily Buildings This webinar was presented by research team Consortium for Advanced Residential ...

  19. Gallium arsenide recycle chemistry and metallurgy

    SciTech Connect (OSTI)

    Bartlett, R.W.

    1987-03-23

    Research was successfully conducted on a smelting approach to separate gallium from arsenic using a liquid copper alloy to collect arsenic while oxidizing the gallium into a soda-silica slag. The slag and copper form two immiscible liquid phases. With GaAs in powder form, smelting at 1150 to 1220{degree}C yields 98% of the gallium in the slag and at least 96% of the arsenic in the copper. The gallium concentration in this slag is, relative to other sources, very high, and it can be processed further to obtain crude gallium. The effect of chemical oxidizers on arsenic and gallium distribution between slag and copper was determined. The solidified copper-arsenic alloy is environmentally inert. However, any precious metals present with the electronic scrap will nearly completely collect in the copper. Commercial copper refineries are capable of recovering precious metals from the copper-arsenic alloy, and are equipped to handle large amounts of arsenic when compared with the amount of arsenic used in GaAs devices, even with many fold future expansions.

  20. Welding Metallurgy and Processing Issues for Joining of Power Sources

    SciTech Connect (OSTI)

    Lienert, Thomas J.; Reardon, Patrick T.

    2012-08-14

    Weldability issues with the pertinent alloys have been reviewed and preliminary results of our work on Haynes 25 have been presented. Further results on the mechanical properties and metallography on the EB welds are imminent. Hot-ductility experiments will commence within a few weeks. Aging studies on the effects of heat treatment using the Gleeble are also planned. MST-6 has extensive background in the welding metallurgy of the pertinent alloys. We also have considerable experience with the various welding processes to be used.

  1. Proceedings of the 25th Seismic Research Review -- Nuclear Explosion Monitoring: Building the Knowledge Base

    SciTech Connect (OSTI)

    Chavez, Francesca C.; Mendius, E. Louise

    2003-09-23

    These proceedings contain papers prepared for the 25th Seismic Research Review -- Nuclear Explosion Monitoring: Building the Knowledge Base, held 23-25 September, 2003 in Tucson, Arizona. These papers represent the combined research related to ground-based nuclear explosion monitoring funded by the National Nuclear Security Administration (NNSA), Defense Threat Reduction Agency (DTRA), Air Force Research Laboratory (AFRL), US Army Space and Missile Defense Command, and other invited sponsors. The scientific objectives of the research are to improve the United States capability to detect, locate, and identify nuclear explosions. The purpose of the meeting is to provide the sponsoring agencies, as well as potential users, an opportunity to review research accomplished during the preceding year and to discuss areas of investigation for the coming year. For the researchers, it provides a forum for the exchange of scientific information toward achieving program goals, and an opportunity to discuss results and future plans. Paper topics include: seismic regionalization and calibration; detection and location of sources; wave propagation from source to receiver; the nature of seismic sources, including mining practices; hydroacoustic, infrasound, and radionuclide methods; on-site inspection; and data processing.

  2. Summary of Prioritized Research Opportunities: Building America Program Planning Meeting, Washington, D.C., November 2-4, 2010

    SciTech Connect (OSTI)

    Not Available

    2011-02-01

    This report outlines the results of brainstorming sessions conducted at the Building America Fall 2010 planning meeting, in which research teams and national laboratories identified key research priorities to incorporate into multi-year planning, team research agendas, expert meetings, and technical standing committees.

  3. Building America Research Teams: BSC and CARB-20 Years of Advancing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    builders and is responsible for the construction of more than 10,000 Building America ... BSC also offers product design and analysis services for manufacturers of building materials ...

  4. Building-Grid Integration Research and Development Innovators Program (BIRD IP)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Building Technologies Office (BTO) within the Department of Energy (DOE) is seeking graduate students interested in exploring building-grid integration and development (R&D) technology concepts that can improve the operating efficiency of buildings and increase penetration of distributed renewable energy generation, leading to more efficient buildings and cleaner generation of electricity.

  5. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Marine Climates; January 2006 - December 2006

    SciTech Connect (OSTI)

    Building America Industrialized Housing Partnership; Building Industry Research Alliance; Building Science Consortium; Consortium for Advanced Residential Buildings; Davis Energy Group; IBACOS; National Association of Home Builders Research Center; National Renewable Energy Laboratory

    2006-12-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost neutral basis.

  6. Building America

    SciTech Connect (OSTI)

    Brad Oberg

    2010-12-31

    IBACOS researched the constructability and viability issues of using high performance windows as one component of a larger approach to building houses that achieve the Building America 70% energy savings target.

  7. The metallurgy and processing science of metal additive manufacturing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sames, William J.; List, III, Frederick Alyious; Pannala, Sreekanth; Dehoff, Ryan R.; Babu, Sudarsanam Suresh

    2016-03-07

    Here, additive Manufacturing (AM), widely known as 3D printing, is a method of manufacturing that forms parts from powder, wire, or sheets in a process that proceeds layer-by-layer.Many techniques (using many different names) have been developed to accomplish this via melting or solid - state joining. In this review, these techniques for producing metal parts are explored, with a focus on the science of metal AM: processing defects, heat transfer, solidification, solid- state precipitation, mechanical properties, and post-processing metallurgy. The various metal AM techniques are compared, with analysis of the strengths and limitations of each. Few alloys have been developedmore » for commercial production, but recent development efforts are presented as a path for the ongoing development of new materials for AM processes.« less

  8. Buildings*","Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Water-Heating Energy Sources, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Buildings*","Buildings with Water Heating","Water-Heating ...

  9. Nationwide Buildings Energy Research enabled through an integrated Data Intensive Scientific Workflow and Advanced Analysis Environment

    SciTech Connect (OSTI)

    Kleese van Dam, Kerstin; Lansing, Carina S.; Elsethagen, Todd O.; Hathaway, John E.; Guillen, Zoe C.; Dirks, James A.; Skorski, Daniel C.; Stephan, Eric G.; Gorrissen, Willy J.; Gorton, Ian; Liu, Yan

    2014-01-28

    Modern workflow systems enable scientists to run ensemble simulations at unprecedented scales and levels of complexity, allowing them to study system sizes previously impossible to achieve, due to the inherent resource requirements needed for the modeling work. However as a result of these new capabilities the science teams suddenly also face unprecedented data volumes that they are unable to analyze with their existing tools and methodologies in a timely fashion. In this paper we will describe the ongoing development work to create an integrated data intensive scientific workflow and analysis environment that offers researchers the ability to easily create and execute complex simulation studies and provides them with different scalable methods to analyze the resulting data volumes. The integration of simulation and analysis environments is hereby not only a question of ease of use, but supports fundamental functions in the correlated analysis of simulation input, execution details and derived results for multi-variant, complex studies. To this end the team extended and integrated the existing capabilities of the Velo data management and analysis infrastructure, the MeDICi data intensive workflow system and RHIPE the R for Hadoop version of the well-known statistics package, as well as developing a new visual analytics interface for the result exploitation by multi-domain users. The capabilities of the new environment are demonstrated on a use case that focusses on the Pacific Northwest National Laboratory (PNNL) building energy team, showing how they were able to take their previously local scale simulations to a nationwide level by utilizing data intensive computing techniques not only for their modeling work, but also for the subsequent analysis of their modeling results. As part of the PNNL research initiative PRIMA (Platform for Regional Integrated Modeling and Analysis) the team performed an initial 3 year study of building energy demands for the US Eastern

  10. Code Gaps and Future Research Needs of Combustion Safety: Building America Expert Meeting Update

    Broader source: Energy.gov [DOE]

    This presentation was delivered at the U.S. Department of Energy Building America Technical Update meeting on April 29-30, 2013, in Denver, Colorado.

  11. Researching Complex Heat, Air and Moisture Interactions for a Wide-Range of Building Envelope Systems and Environmental Loads

    SciTech Connect (OSTI)

    Karagiozis, A.N.

    2007-05-15

    This document serves as the final report documenting work completed by Oak Ridge National Laboratory (ORNL) and the Fraunhofer Institute in Building Physics (Holzkirchen, Germany) under an international CRADA No. 0575 with Fraunhofer Institute of Bauphysics of the Federal Republic of Germany for Researching Complex Heat, Air and Moisture Interactions for a Wide Range of Building Envelope Systems and Environmental Loads. This CRADA required a multi-faceted approach to building envelope research that included a moisture engineering approach by blending extensive material property analysis, laboratory system and sub-system thermal and moisture testing, and advanced moisture analysis prediction performance. The Participant's Institute for Building physics (IBP) and the Contractor's Buildings Technology Center (BTC) identified potential research projects and activities capable of accelerating and advancing the development of innovative, low energy and durable building envelope systems in diverse climates. This allowed a major leverage of the limited resources available to ORNL to execute the required Department of Energy (DOE) directives in the area of moisture engineering. A joint working group (ORNL and Fraunhofer IBP) was assembled and a research plan was executed from May 2000 to May 2005. A number of key deliverables were produced such as adoption of North American loading into the WUFI-software. in addition the ORNL Weather File Analyzer was created and this has been used to address environmental loading for a variety of US climates. At least 4 papers have been co-written with the CRADA partners, and a chapter in the ASTM Manual 40 on Moisture Analysis and Condensation Control. All deliverables and goals were met and exceeded making this collaboration a success to all parties involves.

  12. Final environmental assessment: TRU waste drum staging building, Technical Area 55, Los Alamos National Laboratory

    SciTech Connect (OSTI)

    1996-02-09

    Much of the US Department of Energy`s (DOE`s) research on plutonium metallurgy and plutonium processing is performed at Los Alamos National Laboratory (LANL), in Los Alamos, New Mexico. LANL`s main facility for plutonium research is the Plutonium Facility, also referred to as Technical Area 55 (TA-55). The main laboratory building for plutonium work within the Plutonium Facility (TA-55) is the Plutonium Facility Building 4, or PF-4. This Environmental Assessment (EA) analyzes the potential environmental effects that would be expected to occur if DOE were to stage sealed containers of transuranic (TRU) and TRU mixed waste in a support building at the Plutonium Facility (TA-55) that is adjacent to PF-4. At present, the waste containers are staged in the basement of PF-4. The proposed project is to convert an existing support structure (Building 185), a prefabricated metal building on a concrete foundation, and operate it as a temporary staging facility for sealed containers of solid TRU and TRU mixed waste. The TRU and TRU mixed wastes would be contained in sealed 55-gallon drums and standard waste boxes as they await approval to be transported to TA-54. The containers would then be transported to a longer term TRU waste storage area at TA-54. The TRU wastes are generated from plutonium operations carried out in PF-4. The drum staging building would also be used to store and prepare for use new, empty TRU waste containers.

  13. Buildings | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1.1 Buildings Sector Energy Consumption 1.2 Building Sector Expenditures 1.3 Value of Construction and Research 1.4 Environmental Data 1.5 Generic Fuel Quad and Comparison 1.6 Embodied Energy of Building Assemblies 2The Residential Sector 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy

  14. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    9 Number of Construction Employees and Total Employees for Select Building Equipment Industries (Thousand Employees) Electrical Contractors and Other Wiring Installation Contractors (NAICS 238210) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Plumbing, Heating, and Air-Conditioning Contractors (NAICS 238220) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Other Building Equipment Contractors (NAICS 238290)

  15. TRADITIONAL METALLURGY, NANOTECHNOLOGIES AND STRUCTURAL MATERIALS: A SORBY AWARD LECTURE

    SciTech Connect (OSTI)

    Louthan, M

    2007-07-17

    Traditional metallurgical processes are among the many ''old fashion'' practices that use nanoparticles to control the behavior of materials. Many of these practices were developed long before microscopy could resolve nanoscale features, yet the practitioners learned to manipulate and control microstructural elements that they could neither see nor identify. Furthermore, these early practitioners used that control to modify microstructures and develop desired material properties. Centuries old colored glass, ancient high strength steels and medieval organ pipes derived many of their desirable features through control of nanoparticles in their microstructures. Henry Sorby was among the first to recognize that the properties of rocks, minerals, metals and organic materials were controlled by microstructure. However, Mr. Sorby was accused of the folly of trying to study mountains with a microscope. Although he could not resolve nanoscale microstructural features, Mr. Sorby's observations revolutionized the study of materials. The importance of nanoscale microstructural elements should be emphasized, however, because the present foundation for structural materials was built by manipulating those features. That foundation currently supports several multibillion dollar industries but is not generally considered when the nanomaterials revolution is discussed. This lecture demonstrates that using nanotechnologies to control the behavior of metallic materials is almost as old as the practice of metallurgy and that many of the emergent nanomaterials technologists are walking along pathways previously paved by traditional metallurgists.

  16. Welding metallurgy of nickel alloys in gas turbine components

    SciTech Connect (OSTI)

    Lingenfelter, A. C., LLNL

    1997-05-21

    Materials for gas turbine engines are required to meet a wide range of temperature and stress application requirements. These alloys exhibit a combination of creep resistance, creep rupture strength, yield and tensile strength over a wide temperature range, resistance to environmental attack (including oxidation, nitridation, sulphidation and carburization), fatigue and thermal fatigue resistance, metallurgical stability and useful thermal expansion characteristics. These properties are exhibited by a series of solid-solution-strengthened and precipitation-hardened nickel, iron and cobalt alloys. The properties needed to meet the turbine engine requirements have been achieved by specific alloy additions, by heat treatment and by thermal mechanical processing. A thorough understanding of the metallurgy and metallurgical processing of these materials is imperative in order to successfully fusion weld them. This same basic understanding is required for repair of a component with the added dimension of the potential effects of thermal cycling and environmental exposure the component will have endured in service. This article will explore the potential problems in joining and repair welding these materials.

  17. Energy Savings Potential and Research, Development, & Demonstration Opportunities for Residential Building Heating, Ventilation, and Air Conditioning Systems

    SciTech Connect (OSTI)

    Goetzler, William; Zogg, Robert; Young, Jim; Schmidt, Justin

    2012-10-01

    This report is an assessment of 135 different heating, ventilation, and air-conditioning (HVAC) technologies for U.S. residential buildings to identify and provide analysis on 19 priority technology options in various stages of development. The analyses include an estimation of technical energy-savings potential, descriptions of technical maturity, descriptions of non-energy benefits, descriptions of current barriers for market adoption, and descriptions of the technology's applicability to different building or HVAC equipment types. From these technology descriptions, are suggestions for potential research, development and demonstration (RD&D) initiatives that would support further development of the priority technology options.

  18. Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Heating, Ventilation, and Air Conditioning Systems

    SciTech Connect (OSTI)

    none,

    2011-09-01

    This report covers an assessment of 182 different heating, ventilation, and air-conditioning (HVAC) technologies for U.S. commercial buildings to identify and provide analysis on 17 priority technology options in various stages of development. The analyses include an estimation of technical energy-savings potential, description of technical maturity, description of non-energy benefits, description of current barriers for market adoption, and description of the technology’s applicability to different building or HVAC equipment types. From these technology descriptions, are suggestions for potential research, development and demonstration (RD&D) initiatives that would support further development of the priority technology options.

  19. The Design-Build Process for the Research Support Facility (RSF...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... to remove unwanted humid- ity from the building. Outdoor Air Heating Waste heat from the RSF's data center, combined with heat from the thermal mass in the basement labyrinth, ...

  20. Plug-Load Control and Behavioral Change Research in GSA Office Buildings

    SciTech Connect (OSTI)

    Metzger, I.; Cutler, D.; Sheppy, M.

    2012-10-01

    The U.S. General Services Administration (GSA) owns and leases over 354 million square feet (ft2) of space in over 9,600 buildings [1]. GSA is a leader among federal agencies in aggressively pursuing energy efficiency (EE) opportunities for its facilities and installing renewable energy (RE) systems to provide heating, cooling, and power to these facilities. According to several energy assessments of GSA's buildings conducted by the National Renewable Energy Laboratory (NREL), plug-loads account for approximately 21% of the total electricity consumed within a standard GSA Region 3 office building. This study aims to provide insight on how to effectively manage plug-load energy consumption and attain higher energy and cost savings for plug-loads. As GSA improves the efficiency of its building stock, plug-loads will become an even greater portion of its energy footprint.

  1. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Green Building R&D, as Share of Federal Budget and by Organization Budget Function National Defense 57.2% | DOE Health 23.1% | EPA Other energy, general science, | NSF natural ...

  2. Events | Buildings | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events Below are upcoming events related to buildings research. No current events have been scheduled

  3. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    4 2003 U.S. Private Investment into Construction R&D Sector Average Construction R&D (1) 1.2 Building Technology Heavy Construction 2.0 Appliances 2.0 Special Trade Construction 0.2 Lighting 1.2 HVAC 1.5 U.S. Average of All Private R&D (2) 3.2 Fans, Blowers, & Air Cleaning Equipment 1.6 Manufacturing Average 3.1 Lumber and Wood Products 0.3 Service Industry Average 3.3 Commercial Building Operations 2.2 Note(s): Source(s): Percent of Sales Percent of Sales 1) Includes all

  4. Metal Buildings M&V

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Reference Slides A&S Building Systems American Buildings Architectural Testing Atlas Bolt & Screw Behlen Manufacturing Butler Manufacturing Building Research Systems Kirby ...

  5. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    8 Number of Construction Employees and Total Employees for Select Building Envolope Industries (Thousand Employees) Poured Concrete Foundation and Structure Contractors (NAICS 238110) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Masonry Contractors (NAICS 238140) -Total Employment -Construction/Extraction Occupations -Construction/Extraction % of Total Roofing Contractors (NAICS 238160) -Total Employment -Construction/Extraction Occupations

  6. Building America System Research Plan for Reduction of Miscellaneous Electrical Loads in Zero Energy Homes

    SciTech Connect (OSTI)

    Barley, C. D.; Haley, C.; Anderson, R.; Pratsch, L.

    2008-11-01

    This research plan describes the overall scope of system research that is needed to reduce miscellaneous electrical loads (MEL) in future net zero energy homes.

  7. Joint China-United States Report for Year 1 Insulation Materials and Systems Project Area Clean Energy Research Center Building Energy Efficiency (CERC-BEE)

    SciTech Connect (OSTI)

    Stovall, Therese K; Biswas, Kaushik; Song, Bo; Zhang, Sisi

    2012-08-01

    In November of 2009, the presidents of China and the U.S. announced the establishment of the Clean Energy Research Center (CERC). This broad research effort is co-funded by both countries and involves a large number of research centers and universities in both countries. One part of this program is focused on improving the energy efficiency of buildings. One portion of the CERC-BEE was focused on building insulation systems. The research objective of this effort was to Identify and investigate candidate high performance fire resistant building insulation technologies that meet the goal of building code compliance for exterior wall applications in green buildings in multiple climate zones. A Joint Work Plan was established between researchers at the China Academy of Building Research and Oak Ridge National Laboratory. Efforts in the first year under this plan focused on information gathering. The objective of this research program is to reduce building energy use in China via improved building insulation technology. In cold regions in China, residents often use inefficient heating systems to provide a minimal comfort level within inefficient buildings. In warmer regions, air conditioning has not been commonly used. As living standards rise, energy consumption in these regions will increase dramatically unless significant improvements are made in building energy performance. Previous efforts that defined the current state of the built environment in China and in the U.S. will be used in this research. In countries around the world, building improvements have typically followed the implementation of more stringent building codes. There have been several changes in building codes in both the U.S. and China within the last few years. New U.S. building codes have increased the amount of wall insulation required in new buildings. New government statements from multiple agencies in China have recently changed the requirements for buildings in terms of energy efficiency and

  8. EIS-0350-S1: EPA Notice of Availability of the Final Supplemental Environmental Impact Statement

    Broader source: Energy.gov [DOE]

    Nuclear Facility Portion of the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, New Mexico

  9. EIS-0350-S1: Amended Record of Decision

    Broader source: Energy.gov [DOE]

    Nuclear Facility Portion of the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, Los Alamos, NM

  10. DOE/EIS-0350-SA-2

    Broader source: Energy.gov (indexed) [DOE]

    DOEEIS-0350-SA-2 January 2015 Chemistry and Metallurgy Research Building Replacement ......... 4 Analytical Chemistry and Materials Characterization ...

  11. EIS-0350-S1: EPA Notice of Availability of the Draft Supplemental Environmental Impact Statement

    Office of Energy Efficiency and Renewable Energy (EERE)

    Nuclear Facility Portion of the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, New Mexico

  12. Office Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    page, please call 202-586-8800. There were enough buildings in the responding sample to report statistics for all of these types except for research and development, which has...

  13. Building America Top Innovations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Building America Top Innovations Building America Top Innovations New Top Innovations are awarded annually for outstanding Building America research achievements. Each ...

  14. NREL: Buildings Research - Commercial Buildings Research Staff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Luigi has more than 22 years of experience in telecommunications R&D programs with companies including AT&T Bell Laboratories, Lucent Technologies, Siemens, and Avaya, where he ...

  15. NREL: Buildings Research - Residential Buildings Research Staff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bethany Sparn Eric Wilson Jon Winkler Jason Woods Support Staff Marcia Fratello Photo of ... Contact information: bethany.sparn@nrel.gov, 303-384-7442 Back to Top Eric Wilson Eric ...

  16. The Value of Energy Performance and Green Attributes in Buildings: A Review of Existing Literature and Recommendations for Future Research

    SciTech Connect (OSTI)

    Stuart, Elizabeth

    2011-09-07

    Labels, certifications, and rating systems for energy efficiency performance and green attributes of buildings have been available in the U.S. for over 10 years, and used extensively in the European Union and Australia for longer. Such certifications and ratings can make energy efficiency more visible, and could help spur demand for energy efficiency if these designations are shown to have a positive impact on sales or rental prices. This policy brief discusses the findings and methodologies from recent studies on this topic, and suggests recommendations for future research. Although there have been just a handful of studies within the last 10 years that have investigated these effects, a few key findings emerge: To maximize sales price impact, label or rating information must be disclosed early and visibly in the sales process; The approach to evaluating energy efficiency labels (e.g., ENERGY STAR) and general green certifications (e.g., LEED or GreenPoint Rated) may need to be different, depending on the type, vintage and market penetration of the label; Collaborative efforts to promote label adoption and build a large dataset of labeled buildings will be required to produce reliable study results.

  17. Building America Residential System Research Results. Achieving 30% Whole House Energy Savings Level in Hot-Dry and Mixed-Dry Climates

    SciTech Connect (OSTI)

    Anderson, R.; Hendron, R.; Eastment, M.; Jalalzadeh-Azar, A.

    2006-01-01

    This report summarizes Building America research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Hot-Dry/Mixed-Dry Climate Region on a cost-neutral basis.

  18. PEV Grid Integration Research: Vehicles, Buildings, and Renewables Working Together (Presentation)

    SciTech Connect (OSTI)

    Markel, T.

    2014-06-01

    Presented at the Electric Power Research Institute (EPRI) Infrastructure Working Council (IWC) Meeting, 18-19 June 2014, White Plains, New York

  19. U.S.-India Centre for Building Energy Research and Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    energy innovation in energy efficiency with measurable results and significant reduction in energy use in both nations through this strong foundation of collaborative research ...

  20. PEV Grid Integration Research - Vehicles, Buildings, and Renewables Working Together; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    2015-07-29

    This presentation will discuss current research activities in PEV grid integration at NREL. Presented at the 2015 IEEE Power and Energy Systems General Meeting, Denver, Colorado.

  1. Building America Case Study: Ground Source Heat Pump Research, TaC Studios Residence, Atlanta, Georigia (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA in the mixed-humid climate. This home serves as a residence and home office for the firm's owners, as well as a demonstration of their design approach to potential and current clients. Southface believes the home demonstrates current best practices for the mixed-humid climate, including a building envelope featuring advanced air sealing details and low density spray foam insulation, glazing that exceeds ENERGY STAR requirements, and a high performance heating and cooling system. Construction quality and execution was a high priority for TaC Studios and was ensured by a third party review process. Post construction testing showed that the project met stated goals for envelope performance, an air infiltration rate of 2.15 ACH50. The homeowner's wished to further validate whole house energy savings through the project's involvement with Building America and this long-term monitoring effort. As a Building America test home, this home was evaluated to detail whole house energy use, end use loads, and the efficiency and operation of the ground source heat pump and associated systems. Given that the home includes many non-typical end use loads including a home office, pool, landscape water feature, and other luxury features not accounted for in Building America modeling tools, these end uses were separately monitored to determine their impact on overall energy consumption.

  2. NREL Evaluates Thermal Performance of Uninsulated Walls to Improve Accuracy of Building Energy Simulation Tools (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    researchers discover ways to increase accuracy in building energy simulations tools to improve predictions of potential energy savings in homes. Uninsulated walls are typical in older U.S. homes where the wall cavities were not insulated during construction or where the insulating material has settled. Researchers at the National Renewable Energy Laboratory (NREL) are investigating ways to more accurately calculate heat transfer through building enclosures to verify the benefit of energy

  3. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book [EERE]

    5 2007-2010 Investment into Construction and Energy R&D, by Selected Country Year United States 2007 0.1 0.6 Australia 2010 5.2 1.8 China 2009 1.3 2.5 France 2007 0.4 1.6 Germany 2008 0.1 0.3 Italy 2010 0.9 0.8 Japan 2009 1.0 0.5 Norway 2008 1.4 2.2 Portugal 2008 1.7 6.0 South Africa 2007 0.1 16.2 South Korea 2008 2.5 1.0 United Kingdom 2008 0.1 0.2 Note(s): Source(s): Includes all construction (e.g., bridges, roads, dams, buildings, etc.). National Science Board, Science and Engineering

  4. An Information Building on Radioactivity and Nuclear Energy for the French CEA Cadarache Research Center - 13492

    SciTech Connect (OSTI)

    Brunel, Guy; Denis, Dominique; Boulet, Alain

    2013-07-01

    The CEA Cadarache research center is one of the 10 research centers of the French Alternative Energies and Atomic Energy Commission (CEA). Distributed throughout various research platforms, it focuses on nuclear fission, nuclear fusion, new energy technologies (hydrogen, solar, biomass) and fundamental research in the field of vegetal biology. It is the most important technological research and development centers for energy in Europe. Considering the sensitive nature of nuclear activities, the questions surrounding the issue of radioactive waste, the nuclear energy and the social, economic and environmental concerns for present and future generations, the French Government asked nuclear actors to open communication and to give all the information asked by the Local Information Commission (CLI) and the public [1]. In this context, the CEA Cadarache has decided to better show and explain its expertise and experience in the area of nuclear energy and nuclear power plant design, and to make it available to stakeholders and to the public. CEA Cadarache receives each year more than 9000 visitors. To complete technical visits of the research facilities and laboratories, a scientific cultural center has been built in 2011 to inform the public on CEA Cadarache research activities and to facilitate the acceptance of nuclear energy in a way suited to the level of knowledge of the visitors. A modern interactive exhibition of 150 m{sup 2} allows visitors to find out more about energy, CEA Cadarache research programs, radioactive waste management and radiological impact on the research center activities. It also offers an auditorium for group discussions and for school groups to discover science through enjoyment. This communication center has received several thousand visitors since its opening on October 2011; the initial results of this experience are now available. It's possible to explain the design of this exhibition, to give some statistics on the number of the visitors

  5. Grid-Responsive Buildings

    Broader source: Energy.gov [DOE]

    The U.S.-India Joint Center for Building Energy Research and Development (CBERD) conducts energy efficiency research and development with a focus on integrating information technology with building controls and physical systems for commercial/high-rise residential units.

  6. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Mixed-Humid Climates; January 2006 - December 2006

    SciTech Connect (OSTI)

    Building America Industrialized Housing Partnership; Building Industry Research Alliance; Building Science Consortium; Consortium for Advanced Residential Buildings; Davis Energy Group; IBACOS; National Association of Home Builders Research Center; National Renewable Energy Laboratory

    2006-12-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Mixed-Humid Climate Region on a cost-neutral basis.

  7. Building Technologies Program Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewable Energy Building Technologies Program Jerry Dion Acting Program Manager Building Technologies Program State Energy Advisory Board Meeting October 17, 2007 The investment in Buildings R&D yielded an ROI of 15:1 from 1978 to 2000 The Buildings Technologies Program researches and Energy Efficiency & deploys new technologies to make homes and Renewable Energy commercial buildings more affordable, energy efficient, and better performing The investment in Buildings R&D yielded an

  8. Building America Expert Meeting: Advanced Envelope Research for Factory Built Housing

    Broader source: Energy.gov [DOE]

    This report provides information about the expert meeting on advanced envelope research for factory built housing, hosted by the ARIES Collaborative on October 11, 2011, in Phoenix, Arizona. The goals of this meeting were to provide a comprehensive solution to the use of three previously selected advanced alternatives for factory-built wall construction, assess each option focusing on major issues relating to viability and commercial potential, and determine additional steps are required to reach this potential.

  9. Building America Webinar: Ventilation in Multifamily Buildings | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Ventilation in Multifamily Buildings Building America Webinar: Ventilation in Multifamily Buildings This webinar was presented by research team Consortium for Advanced Residential Buildings (CARB), and discussed ventilation strategies for multifamily buildings, including how to successfully implement those strategies through smart design, specification, and construction techniques. webinar_ventilation_multifamily_20111101.wmv (22.17 MB) More Documents & Publications Building

  10. Reducing Data Center Loads for a Large-Scale, Low-Energy Office Building: NREL's Research Support Facility (Book)

    SciTech Connect (OSTI)

    Sheppy, M.; Lobato, C.; Van Geet, O.; Pless, S.; Donovan, K.; Powers, C.

    2011-12-01

    This publication detailing the design, implementation strategies, and continuous performance monitoring of NREL's Research Support Facility data center. Data centers are energy-intensive spaces that facilitate the transmission, receipt, processing, and storage of digital data. These spaces require redundancies in power and storage, as well as infrastructure, to cool computing equipment and manage the resulting waste heat (Tschudi, Xu, Sartor, and Stein, 2003). Data center spaces can consume more than 100 times the energy of standard office spaces (VanGeet 2011). The U.S. Environmental Protection Agency (EPA) reported that data centers used 61 billion kilowatt-hours (kWh) in 2006, which was 1.5% of the total electricity consumption in the U.S. (U.S. EPA, 2007). Worldwide, data centers now consume more energy annually than Sweden (New York Times, 2009). Given their high energy consumption and conventional operation practices, there is a potential for huge energy savings in data centers. The National Renewable Energy Laboratory (NREL) is world renowned for its commitment to green building construction. In June 2010, the laboratory finished construction of a 220,000-square-foot (ft{sup 2}), LEED Platinum, Research Support Facility (RSF), which included a 1,900-ft{sup 2} data center. The RSF will expand to 360,000 ft{sup 2} with the opening of an additional wing December, 2011. The project's request for proposals (RFP) set a whole-building demand-side energy use requirement of a nominal 35 kBtu/ft{sup 2} per year. On-site renewable energy generation will offset the annual energy consumption. To support the RSF's energy goals, NREL's new data center was designed to minimize its energy footprint without compromising service quality. Several implementation challenges emerged during the design, construction, and first 11 months of operation of the RSF data center. This document highlights these challenges and describes in detail how NREL successfully overcame them. The IT

  11. Building geothermal research and development partnerships: The California Energy Commission`s geothermal program

    SciTech Connect (OSTI)

    Hare, R.; Tiangco, V.; Birkinshaw, K.; Johannis, M.

    1995-12-31

    The California Energy Commission`s Geothermal Program (Assembly Bill 1905, Bosco) has built cost-shared Research, Development and Demonstration (RD&D) partnerships with over 150 public and private entities. The Geothermal Program promotes the development of new geothermal resources and technologies for both direct-use and electricity generation while protecting the environment and promoting energy independence. This is accomplished by providing financial and technical assistance in the form of contingent awards which, depending on project success, can become either a loan or a grant. Some of the cost-shared RD&D accomplishments are presented. The process and requirements to obtain financial assistance through the Geothermal Program are summarized.

  12. Powder Metallurgy of Uranium Alloy Fuels for TRU-Burning Reactors Final Technical Report

    SciTech Connect (OSTI)

    McDeavitt, Sean M

    2011-04-29

    Overview Fast reactors were evaluated to enable the transmutation of transuranic isotopes generated by nuclear energy systems. The motivation for this was that TRU isotopes have high radiotoxicity and relatively long half-lives, making them unattractive for disposal in a long-term geologic repository. Fast reactors provide an efficient means to utilize the energy content of the TRUs while destroying them. An enabling technology that requires research and development is the fabrication metallic fuel containing TRU isotopes using powder metallurgy methods. This project focused upon developing a powder metallurgical fabrication method to produce U-Zr-transuranic (TRU) alloys at relatively low processing temperatures (500ºC to 600ºC) using either hot extrusion or alpha-phase sintering for charecterization. Researchers quantified the fundamental aspects of both processing methods using surrogate metals to simulate the TRU elements. The process produced novel solutions to some of the issues relating to metallic fuels, such as fuel-cladding chemical interactions, fuel swelling, volatility losses during casting, and casting mold material losses. Workscope There were two primary tasks associated with this project: 1. Hot working fabrication using mechanical alloying and extrusion • Design, fabricate, and assemble extrusion equipment • Extrusion database on DU metal • Extrusion database on U-10Zr alloys • Extrusion database on U-20xx-10Zr alloys • Evaluation and testing of tube sheath metals 2. Low-temperature sintering of U alloys • Design, fabricate, and assemble equipment • Sintering database on DU metal • Sintering database on U-10Zr alloys • Liquid assisted phase sintering on U-20xx-10Zr alloys Appendices Outline Appendix A contains a Fuel Cycle Research & Development (FCR&D) poster and contact presentation where TAMU made primary contributions. Appendix B contains MSNE theses and final defense presentations by David Garnetti and Grant Helmreich

  13. Meet CMI Researcher Vitalij Pecharsky | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vitalij Pecharsky Vitalij Pecharsky teaches Chemical and Physical Metallurgy of Rare Earths at Iowa State University. Vitalij Pecharsky, Ames Lab senior metallurgist and ISU Distinguished Professor in materials science and engineering, teaches a course at Iowa State University on the chemical and physical metallurgy of rare earths. The course offered at Iowa State University is available as a distance education course for researchers and industry representatives. It is offered every other spring

  14. Actinide Research Quarterly

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARQ A publication of the Glenn T. Seaborg Institute for Transactinium Science. Latest Issue:August 2015 ARQ past issues covers All Issues » submit Actinide Research Quarterly (ARQ) ARQ is a publication of the Glenn T. Seaborg Institute for Transactinium Science, a part of the LANL National Security Education Center. The Actinide Research Quarterly reports on research in actinide science in areas such as process chemistry, metallurgy, surface and separation sciences, atomic and molecular

  15. Building America FY14 Projects by Building Type | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Projects by Building Type Building America FY14 Projects by Building Type This table lists U.S. Department of Energy Building America FY14 research projects by building type. building_america_fy14projects_bldgtype.pdf (236.49 KB) More Documents & Publications Building America FY14 Research Projects by Research Team

  16. Buildings | Buildings | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Index for Commercial Buildings Welcome to the Energy Index for Commercial Buildings. Data for this tool comes from the Energy Information Administration's (EIA) 2003 Commercial Buildings Energy Consumption Survey (CBECS). Select categories from the CBECS micro data allow users to search on common building characteristics that impact energy use. Users may select multiple criteria, however if the resulting sample size is too small, the data will be unreliable. If nothing is selected results

  17. Building Design & Construction - Sustainability

    SciTech Connect (OSTI)

    2003-11-01

    Offers a brief history of green building; presents the results of a specially commissioned survey; and analyzes the chief trends, issues, and published research, based on interviews with dozens of experts and participants in green building.

  18. NREL: Buildings Research - Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... NREL Provides Guidance to Improve Air Mixing and Thermal ... FS-5500-54845. Solar Water Heater Roadmap Leads Path to Market ... Evaluation of Humidity Control Options in Hot-Humid ...

  19. Building America System Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Thermal Encl. Low-Load HVAC Low-Load HVAC Water Man. Water Man. Eff. Comps MEL's Eff. Comps. MEL's Ventilat'nIAQ Ventilat'nIAQ Water Man. Water Man. Ventilat'nIAQ Ventilat'n...

  20. Building America Top Innovations 2013 Profile Building America Solution Center

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This Top Innovation profile provides information about the Building America Solution Center created by Pacific Northwest National Laboratory, a web tool connecting users to thousands of pieces of building science information developed by DOEs Building America research partners.

  1. Building America Solution Center- Building America Top Innovation

    Broader source: Energy.gov [DOE]

    PNNL set up the framework for the Building America Solution Center, a web tool connecting users to thousands of pieces of building science information developed by DOE’s Building America research partners.

  2. Building Technologies Program Key Activities

    SciTech Connect (OSTI)

    2011-12-15

    The Building Technologies Program (BTP) employs a balanced approach to making buildings more energy efficient. The three pillars of our program, research and development (R&D), market stimulation, and building and equipment standards, help meet our strategic vision.

  3. Reducing Plug and Process Loads for a Large Scale, Low Energy Office Building: NREL's Research Support Facility; Preprint

    SciTech Connect (OSTI)

    Lobato, C.; Pless, S.; Sheppy, M.; Torcellini, P.

    2011-02-01

    This paper documents the design and operational plug and process load energy efficiency measures needed to allow a large scale office building to reach ultra high efficiency building goals. The appendices of this document contain a wealth of documentation pertaining to plug and process load design in the RSF, including a list of equipment was selected for use.

  4. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in the Hot-Dry and Mixed-Dry Climates

    SciTech Connect (OSTI)

    Building Industry Research Alliance; Building Science Consortium; Consortium for Advanced Residential Buildings; Davis Energy Group; Florida Solar Energy Center; IBACOS; National Association of Home Builders Research Center; National Renewable Energy Laboratory

    2006-01-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Hot-Dry/Mixed-Dry Climate Region on a cost neutral basis.

  5. Fatigue-crack propagation in aluminum-lithium alloys processed by power and ingot metallurgy

    SciTech Connect (OSTI)

    Venkateswara Rao, K.T.; Ritchie, R.O. ); Kim, N.J. ); Pizzo, P.P. )

    1990-04-01

    Fatigue-crack propagation behavior in powder-metallurgy (P/M) aluminum-lithium alloys, namely, mechanically-alloyed (MA) Al-4.0Mg-1.5Li-1.1C-0.80{sub 2} (Inco 905-XL) and rapid-solidification-processed (RSP) Al-2.6Li-1.0Cu-0.5Mg-0.5Zr (Allied 644-B) extrusions, has been studied, and results compared with data on an equivalent ingot-metallurgy (I/M) Al-Li alloy, 2090-T81 plate. Fatigue-crack growth resistance of the RSP Al-Li alloy is found to be comparable to the I/M Al-Li alloy; in contrast, crack velocities in MA 905-XL extrusions are nearly three orders of magnitude faster. Growth-rate response in both P/M Al-Li alloys, however, is high anisotropic. Results are interpreted in terms of the microstructural influence of strengthening mechanism, slip mode, grain morphology and texture on the development of crack-tip shielding from crack-path deflection and crack closure. 14 refs., 7 figs., 2 tabs.

  6. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    1.1 Buildings Sector Energy Consumption 1.2 Building Sector Expenditures 1.3 Value of Construction and Research 1.4 Environmental Data 1.5 Generic Fuel Quad and Comparison 1.6 Embodied Energy of Building Assemblies 2The Residential Sector 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy

  7. Advanced Load Identification and Management for Buildings: Cooperative Research and Development Final Report, CRADA Number: CRD-11-422

    SciTech Connect (OSTI)

    Gentile-Polese, L.

    2014-05-01

    The goal of this CRADA work is to support Eaton Innovation Center (Eaton) efforts to develop advanced load identification, management technologies, and solutions to reduce building energy consumption by providing fine granular visibility of energy usage information and safety protection of miscellaneous electric loads (MELs) in commercial and residential buildings. MELs load identification and prediction technology will be employed in a novel 'Smart eOutlet*' to provide critical intelligence and information to improve the capability and functionality of building load analysis and design tools and building power management systems. The work scoped in this CRADA involves the following activities: development and validation of business value proposition for the proposed technologies through voice of customer investigation, market analysis, and third-party objective assessment; development and validation of energy saving impact as well as assessment of environmental and economic benefits; 'smart eOutlet' concept design, prototyping, and validation; field validation of the developed technologies in real building environments. (*Another name denoted as 'Smart Power Strip (SPS)' will be used as an alternative of the name 'Smart eOutlet' for a clearer definition of the product market position in future work.)

  8. Industrial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Industrial Industrial Manufacturing Buildings Industrialmanufacturing buildings are not considered commercial, but are covered by the Manufacturing Energy Consumption Survey...

  9. Windows and Building Envelope Facilities

    Broader source: Energy.gov [DOE]

    The Department of Energy funds these three test national lab test facilities to do window and building envelope research.

  10. Building America Webinar: Building America Technology-to-Market Roadmaps |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Technology-to-Market Roadmaps Building America Webinar: Building America Technology-to-Market Roadmaps This webinar introduced the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America's research, development, and demonstration activities over the coming years and result in an integrated Building America Research-to-Market Plan in 2015. This webinar also provided information about the Request for Information that was

  11. old.new.factsheets.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CMR Chemistry and Metallurgy Research Facility The Los Alamos National Laboratory (LANL) Chemistry and Metallurgy Research (CMR) building supports research and experimental activities for plutonium and uranium analytical chemistry and metallurgy. In 1952, the f rst LANL CMR facility was completed. At that time, the CMR was one of the world's f rst research and experimen- tal facilities for analytical actinide chemistry and metallurgy. Upgrades to the original CMR were completed in 2002. In 2012,

  12. Buildings*","Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Gas","Fuel Oil","District Heat","Propane","Other a" "All Buildings* ... Water ......",33,32,6,8,"Q",24,"Q","N" "Propane ......",502,489,179,40,59...

  13. An annotated bibliography of completed and in-progress behavioral research for the Office of Buildings and Community Systems. [About 1000 items, usually with abstracts

    SciTech Connect (OSTI)

    Weijo, R.O.; Roberson, B.F.; Eckert, R.; Anderson, M.R.

    1988-05-01

    This report provides an annotated bibliography of completed and in-progress consumer decision research useful for technology transfer and commercialization planning by the US Department of Energy's (DOE) Office of Buildings and Community Systems (OBCS). This report attempts to integrate the consumer research studies conducted across several public and private organizations over the last four to five years. Some of the sources of studies included in this annotated bibliography are DOE National Laboratories, public and private utilities, trade associations, states, and nonprofit organizations. This study divides the articles identified in this annotated bibliography into sections that are consistent with or similar to the system of organization used by OBCS.

  14. 2012 News | Buildings | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 News Below are news stories related to Buildings. RSS Learn about RSS. November 20, 2012 NREL's Research Support Facility Garners Second LEED® Platinum The Research Support Facility (RSF) on the campus of the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) in Golden, Colo. has earned its second LEED® Platinum designation for new construction from the U.S. Green Building Council (USGBC), a non-profit organization dedicated to sustainable building design and

  15. Causal Factors of Weld Porosity in Gas Tungsten Arc Welding of Powder Metallurgy Produced Titanium Alloys

    SciTech Connect (OSTI)

    Muth, Thomas R; Yamamoto, Yukinori; Frederick, David Alan; Contescu, Cristian I; Chen, Wei; Lim, Yong Chae; Peter, William H; Feng, Zhili

    2013-01-01

    ORNL undertook an investigation using gas tungsten arc (GTA) welding on consolidated powder metallurgy (PM) titanium (Ti) plate, to identify the causal factors behind observed porosity in fusion welding. Tramp element compounds of sodium and magnesium, residual from the metallothermic reduction of titanium chloride used to produce the titanium, were remnant in the starting powder and were identified as gas forming species. PM-titanium made from revert scrap where sodium and magnesium were absent, showed fusion weld porosity, although to a lesser degree. We show that porosity was attributable to hydrogen from adsorbed water on the surface of the powders prior to consolidation. The removal / minimization of both adsorbed water on the surface of titanium powder and the residues from the reduction process prior to consolidation of titanium powders, are critical to achieve equivalent fusion welding success similar to that seen in wrought titanium produced via the Kroll process.

  16. House Simulation Protocols (Building America Benchmark) - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    House Simulation Protocols (Building America Benchmark) - Building America Top Innovation House Simulation Protocols (Building America Benchmark) - Building America Top Innovation ...

  17. Mercantile Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Mercantile Characteristics by Activity... Mercantile Mercantile buildings are those used for the sale and display of goods other than food (buildings used for the sales of food are...

  18. Education Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Education Characteristics by Activity... Education Education buildings are buildings used for academic or technical classroom instruction, such as elementary, middle, or high...

  19. Better Buildings

    Broader source: Energy.gov [DOE]

    The Better Buildings Initiative aims to make commercial and industrial buildings 20% more energy efficient by 2020 and accelerate private sector investment in energy efficiency.

  20. Building America Tools and Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America Tools and Resources Building America Tools and Resources The Building America Program provides homeowners, researchers, and building professionals with tools and resources ...

  1. 2014-09-30 Issuance: Buildings-to-Grid Integration and Related Areas of Research; Notice of Availability and Request for Public Comment

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice of availability and request for public comment regarding buildings-to-grid integration and related areas of research, as issued by the Deputy Assistant Secretary for Energy Efficiency on September 30, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  2. Building America Webinar: Saving Energy in Multifamily Buildings |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Saving Energy in Multifamily Buildings Building America Webinar: Saving Energy in Multifamily Buildings This webinar introduced the Building America team Partnership for Advanced Residential Retrofit (PARR) and its partners, outlined team objectives, and highlighted their current research program, Energy Savers. webinar_multifamily_bldgs_20110726.wmv (16.04 MB) More Documents & Publications Building America Webinar: Retrofit Ventilation Strategies in Multifamily

  3. Building America Top Innovations 2012: Unvented Crawlspaces Code Adoption

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research which has supported acceptance of unvented crawlspaces in the IRC.

  4. Building America Webinar: Building America Technology-to-Market Roadmaps

    Broader source: Energy.gov [DOE]

    This free webinar will introduce the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America’s research, development, and demonstration activities...

  5. Building America Overview - 2015 BTO Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Energy Efficiency Market Buildings.Energy.gov Building Technologies Office Ecosystem 2012 2009 Future Research to Market to Standard Practice 50% 40% 30% 20% 10% 0% -10% ...

  6. Metal Buildings- 2014 BTO Peer Review

    Broader source: Energy.gov [DOE]

    Presenter: Heather Buckberry, Oak Ridge National Laboratory This project aims to increase energy efficiency in metal buildings through research into areas specifically targeted by metal building industry leaders.

  7. Better Buildings Neighborhood Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Buildings Performance Database - 2013 BTO Peer Review Building America System Research Energy Management Systems Package for Small Commercial ...

  8. Building America Update - November 9, 2012

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and publications from the U.S. Department of Energy's Building America program. ... In this training, DOE and team members from Building America Research Partner Steven ...

  9. Building America Webinar: Ductless Hydronic Distribution Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Webinar: Ductless Hydronic Distribution Systems Building America Webinar: Ductless Hydronic Distribution Systems This webinar was presented by research team...

  10. Integrative Genomics Building

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Integrative Genomics Building Community Environmental Documents Tours Community Programs Friends of Berkeley Lab ⇒ Navigate Section Community Environmental Documents Tours Community Programs Friends of Berkeley Lab Project Description The Integrative Genomics Building (IGB) is proposed to be an approximately 77,000 gsf, four-story research and office building constructed in the former Bevatron area - a fully developed site in the geographic interior of the Berkeley Lab. The IGB is intended to