Powered by Deep Web Technologies
Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

ORDNANCE  

E-Print Network (OSTI)

Projectite Weapons of We“. Mr. LYNALL THOMAS, Rt?ed Ordnance. M. PANOT. Lieutenant Srnvnns, R. N... Pointing at Sea. M. Peon, Theorie dn Poe'ntege.

2

Sheet metal stamping die design for warm forming  

DOE Patents (OSTI)

In metal stamping dies, by taking advantage of improved material flow by selectively warming the die, flat sections of the die can contribute to the flow of material throughout the workpiece. Local surface heating can be accomplished by placing a heating block in the die. Distribution of heating at the flat lower train central regions outside of the bend region allows a softer flow at a lower stress to enable material flow into the thinner, higher strain areas at the bend/s. The heating block is inserted into the die and is powered by a power supply.

Ghosh, Amit K. (Ann Arbor, MI)

2003-04-22T23:59:59.000Z

3

ORDNANCE CORPS  

Office of Legacy Management (LM)

id id ' . ORDNANCE CORPS ..: .: FRANKFORD ARSENAL With reference to peur lethi doted 12 hroh 1953, aomxm&g mrml ltlnnb8 wblob will be tramierre- Bllklf8c~ Laboratorlee, Ino., ie flnmlebed: s.8 Reetm, &keo., tale follorlng 3lu~tlM 1. 2. At the preeent tiae no 8p ~terlal. he bun eldpped fro8thelbenkferdAreen8lto~Uanut80~ Laboratorlee, Inc. Rewemr, it le understood that 8e!aullportionDftbesPmaterllebippedto liatmtan Areeaal frcm the Prankfcrtl Areenel. bae been tramfed ta tbe Menuf8oturing Labozmtcriee, 1x10. Inforution on the uotmt cf mteria.l ebipped to the Hemfr~otm%g Labcndries, ho., oan be cMd.md fron~dertenaArseaal,Acwuutabill~Spbol-Ii& xtde. expected that mpproaim*, l5Q polmde of -la l sWdllbembippedfiwmFraakfordkseml-PAR- to the Rannfaom Iabertiterlu, ho. .

4

Large Area Micro-texture Imprinting onto Metallic Sheet via CNC Stamping  

Science Journals Connector (OSTI)

Abstract Micro-lens array and micro optical elements require for geometrically accurate registration of micro-patterns onto the oxide glasses. Heat radiation device and heat reservoir units have to equip their own unique micro-patterns with high aspect ratio. Lithography and related processes, or, micro- and nano-imprinting are effective to make these micro-patterns once onto the silicon or silica substrates. Even in those applications, the aspect ratio of micro-patterns is still limited to be shallow. The authors have been developing a new method to fabricate a DLC (Diamond-Like Carbon) coated mother mold-die by plasma oxygen etching and to duplicate the original micro-patterns on the mold-die onto the metallic and plastic sheets. This approach is suitable not only to mass-production of micro-patterned sensors and devices but also to selective nano- and micro-imprinting of various micro-patterns onto the metallic sheets. In the present paper, a micro-cavity pattern with the unit size of 3.5x3.5x4.6 ?m3 is imprinted onto an aluminum sheet with the thickness of 0.08 mm by CNC-stamping with use of the micro-textured DLC-die. This CNC-stamping system is revised to make motion control both in loading and unloading processes for improvement of geometric accuracy and increase of aspect ratio in the micro-cavity pattern. Among several motion-control programs, a pulse-wise motion is employed to duplicate the deeper micro-cavity patterns onto the aluminum sheets.

Tatstuhiko Aizawa; Masahiro Tamaki; Tatsuya Fukuda

2014-01-01T23:59:59.000Z

5

THE SCIOTO ORDNANCE PLANT  

Office of Legacy Management (LM)

' ' 1 . \." _ j. .I > * .A; .i ,' / / ,/ ' , ( , ( 1: 1 i I l-1 5 ' / ,,' :A' ' , THE SCIOTO ORDNANCE PLANT . and THE MARION ENGINEER DEPOT of Marion, Ohio A Profile AFTER FORTY YEARS BY Charles D. Mosher and Delpha Ruth Mosher . . . 111 THE AUTHORS Charles D. Mosher was born on a farm located in Morrow County on Mosher Road near Mt. Gilead. He received his TH.B. from Malone College, B.A. from Baldwin-Wallace College and his B.Div. and M.Div. at the Nazarene Theological Seminary in Kansas City, MO. He did additional graduate work at Western Reserve University, Kent State University and Florida State University. He has taught in Cleveland and in Morrow County and has been an Occupational Work Adjustment teacher at Harding High School in Marion

6

DOE - Office of Legacy Management -- National Fireworks Ordnance Corp - MA  

Office of Legacy Management (LM)

Fireworks Ordnance Corp - Fireworks Ordnance Corp - MA 13 FUSRAP Considered Sites Site: NATIONAL FIREWORKS ORDNANCE CORP (MA.13) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: American Potash and Chemical Corporation MA.13-3 Location: West Hanover , Massachusetts MA.13-1 Evaluation Year: 1991 MA.13-1 Site Operations: Performed bench scale research and development on uranium forming during the 1960s. MA.13-2 MA.13-3 Site Disposition: Eliminated - Potential for contamination considered remote based on the limited quantity of materials handled MA.13-1 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium Metal and Powders MA.13-3 Radiological Survey(s): None Indicated MA.13-2 Site Status: Eliminated from consideration under FUSRAP

7

DOE - Office of Legacy Management -- Alabama Ordnance Works ...  

Office of Legacy Management (LM)

Alabama Ordnance Works - AL 02 FUSRAP Considered Sites Site: Alabama Ordnance Works (AL.02 ) Eliminated from consideration under FUSRAP - Referred to DoD Designated Name: Not...

8

China Ordnance Equipment Group Corporation COEGC | Open Energy Information  

Open Energy Info (EERE)

Ordnance Equipment Group Corporation COEGC Ordnance Equipment Group Corporation COEGC Jump to: navigation, search Name China Ordnance Equipment Group Corporation (COEGC) Place Beijing Municipality, China Sector Solar, Wind energy Product Chinese state-owned conglomerate that manufactures a number of products for Chinese People's Liberation Army diversifying into wind and solar equipment manufacturing. References China Ordnance Equipment Group Corporation (COEGC)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. China Ordnance Equipment Group Corporation (COEGC) is a company located in Beijing Municipality, China . References ↑ "[ China Ordnance Equipment Group Corporation (COEGC)]" Retrieved from

9

DOE - Office of Legacy Management -- Morgantown Ordnance Works...  

Office of Legacy Management (LM)

(NETL). NETL historically has focused on the development of advanced technologies related to coal and natural gas. Also see Documents Related to Morgantown Ordnance Works...

10

Telerobotic excavation system for unexploded ordnance retrieval  

SciTech Connect

The small emplacement excavator (SEE) is a ruggedized military vehicle with backhoe and front loader used by the US Army for unexploded ordnance (UXO) retrieval and general utility excavation activities. In order to evaluate the feasibility of removing personnel from the vehicle during high-risk excavation tasks a development and demonstration project was initiated to evaluate performance capabilities of the SEE under telerobotic control. A technology demonstration of the TSEE was conducted at McKinley Range, Redstone Arsenal, Huntsville, Alabama on 13--17 September, 1993. The primary objective of the demonstration was to evaluate and demonstrate the feasibility of remote UXO retrieval. During the demonstration, explosive ordnance disposal specialists were instructed on telerobotic operation of the TSEE, and then were asked to complete a simulated UXO retrieval task. Participants then submitted an evaluation of the system including human factors performance data. This presentation will describe the TSEE, retrieval demonstration, and summarize results of the performance evaluations. Some examples of the results are given below. Seventy percent of the demonstration participants found the tasks were as easy or easier to accomplish utilizing the remote system than with an unmodified system. Similarly, eighty percent of the participants found the TSEE hand controller was as easy or easier to use than the normal manual controls.

Burks, B.L.; Killough, S.M.; Thompson, D.H. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Rossi, R.A. [Office of the Project Manager for Ammunition Logistics, Picatinny Arsenal, NJ (United States)

1994-12-31T23:59:59.000Z

11

DOE - Office of Legacy Management -- Kankakee Ordnance Plant - IL 32  

Office of Legacy Management (LM)

Kankakee Ordnance Plant - IL 32 Kankakee Ordnance Plant - IL 32 FUSRAP Considered Sites Site: KANKAKEE ORDNANCE PLANT (IL.32 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Kankakee , Illinois IL.32-1 Evaluation Year: 1991 IL.32-1 Site Operations: Kankakee Ordnance Plant was cited as a possible location for the disposal of radioactive waste material. There is no indication that any radioactive waste was brought to Kankakee. IL.32-1 IL.32-2 Site Disposition: Eliminated - No indication that radioactive materials were handled at this site IL.32-1 Radioactive Materials Handled: None Indicated IL.32-1 Primary Radioactive Materials Handled: None Radiological Survey(s): No Site Status: Eliminated from further consideration under FUSRAP

12

DOE - Office of Legacy Management -- Pennsylvania Ordnance Works - PA 32  

Office of Legacy Management (LM)

Ordnance Works - PA 32 Ordnance Works - PA 32 FUSRAP Considered Sites Site: Pennsylvania Ordnance Works (PA.32 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: This site is one of a group of 77 FUSRAP considered sites for which few, if any records are available in their respective site files to provide an historical account of past operations and their relationship, if any, with MED/AEC operations. Reviews of contact lists, accountable station lists, health and safety records and other documentation of the period do not provide sufficient information to warrant further search of historical records for information on these sites. These site files remain "open" to

13

Design of a Large Explosive Ordnance Disposal Robot  

Science Journals Connector (OSTI)

The explosive ordnance disposal robot (EOD robot) can replace man to reconnoiter, remove and deal with explosives or other dangerous articles in the dangerous environment. We design a large EOD robot which is constituted by the vehicle body, the mechanical ... Keywords: EOD robot, vehicle body, mechanical hand, vision system

Boyu Wei; Junyao Gao; Jianguo Zhu; Kejie Li

2009-10-01T23:59:59.000Z

14

Artificial Intelligence for Explosive Ordnance Disposal System (AI-EOD)  

SciTech Connect

Based on a dynamically configurable neural net that learns in a single pass of the training data, this paper describes a system used by the military in the identification of explosive ordnance. Allowing the technician to input incomplete, contradictory, and wrong information, this system combines expert systems and neural nets to provide a state-of-the-art search, retrieval, and image and text management system.

Madrid, R.; Williams, B.; Holland, J.

1992-03-01T23:59:59.000Z

15

Artificial Intelligence for Explosive Ordnance Disposal System (AI-EOD)  

SciTech Connect

Based on a dynamically configurable neural net that learns in a single pass of the training data, this paper describes a system used by the military in the identification of explosive ordnance. Allowing the technician to input incomplete, contradictory, and wrong information, this system combines expert systems and neural nets to provide a state-of-the-art search, retrieval, and image and text management system.

Madrid, R.; Williams, B.; Holland, J.

1992-01-01T23:59:59.000Z

16

Missouri Ordnance Works Becomes Bureau ot Mines Demonstration Plant  

Science Journals Connector (OSTI)

The Bureau of Mines estimates that the United States has about 3 trillion tons of coal reserves—enough to supply the nation with both solid and liquid fuels for at least 1,000 years. ... The Bureau of Mines will take over the Missouri Ordnance Works, near Louisiana, Mo., a $17,500,000 plant that made synthetic ammonia during the war, and convert it into a demonstration plant for the production of gasoline and oil from coal and lignite. ...

1946-01-10T23:59:59.000Z

17

A Postage Stamp History of Chemistry  

Science Journals Connector (OSTI)

An earlier historical article in Applied Spectroscopy used postage stamps to provide colorful illustrations for a short history of spectroscopy. Since the Editor has kindly...

Miller, Foil A

1986-01-01T23:59:59.000Z

18

Making Sense of Oil Stamp Saving Schemes  

E-Print Network (OSTI)

An increasing number of households in Northern Ireland has started to collect oil stamps in recent years - i.e. small pieces of paper which can be purchased at specified outlets, collected on an oil stamps savings card, and used to pay in full...

Brutscher, Philipp-Bastian

2012-01-23T23:59:59.000Z

19

Supramolecular nano-stamping : analyzing market potential  

E-Print Network (OSTI)

An analysis was carried out on the process of Supramolecular Nano-Stamping (SuNS) in order to determine whether or not the science involved has market potential in the DNA microarray industry. This industry is rapidly ...

DePalma, Christina Maria

2005-01-01T23:59:59.000Z

20

Unexploded ordnance issues at Aberdeen Proving Ground: Background information  

SciTech Connect

This document summarizes currently available information about the presence and significance of unexploded ordnance (UXO) in the two main areas of Aberdeen Proving Ground: Aberdeen Area and Edgewood Area. Known UXO in the land ranges of the Aberdeen Area consists entirely of conventional munitions. The Edgewood Area contains, in addition to conventional munitions, a significant quantity of chemical-munition UXO, which is reflected in the presence of chemical agent decomposition products in Edgewood Area ground-water samples. It may be concluded from current information that the UXO at Aberdeen Proving Ground has not adversely affected the environment through release of toxic substances to the public domain, especially not by water pathways, and is not likely to do so in the near future. Nevertheless, modest but periodic monitoring of groundwater and nearby surface waters would be a prudent policy.

Rosenblatt, D.H.

1996-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

DOE - Office of Legacy Management -- Naval Ordnance Laboratory - MD 0-03  

Office of Legacy Management (LM)

Ordnance Laboratory - MD 0-03 Ordnance Laboratory - MD 0-03 FUSRAP Considered Sites Site: NAVAL ORDNANCE LABORATORY (MD.0-03 ) Eliminated from further consideration under FUSRAP - Referred to DOD Designated Name: Not Designated Alternate Name: Naval Ordnance Laboratory - White Oak Location: White Oak Area , Silver Spring , Maryland MD.0-03-1 MD.0-03-2 Evaluation Year: 1987 MD.0-03-2 Site Operations: Research and development - may have involved radioactive materials because the site was identified on a 1955 Accountability Station List. MD.0-03-1 Site Disposition: Eliminated - NRC licensed MD.0-03-2 Radioactive Materials Handled: None Specifically Identified Primary Radioactive Materials Handled: None specifically indicated Radiological Survey(s): None Indicated Site Status: Eliminated from further consideration under FUSRAP - Referred to DOD MD.0-03-2

22

Measurement of projectile energy and velocity requirements for the disruption of unexploded ordnance  

E-Print Network (OSTI)

This paper details the design and fabrication of a disrupting test rig for measuring the energy required to separate the fuze from the casing of unexploded ordnance (UXO), also called disrupting the device. Preliminary ...

Jeunnette, Mark N. (Mark Nathaniel), 1979-

2013-01-01T23:59:59.000Z

23

LED Traffic Lights Get Buy American Stamp | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Traffic Lights Get Buy American Stamp LED Traffic Lights Get Buy American Stamp November 30, 2010 - 10:19am Addthis Red. Yellow. Green. What LED traffic signals don't say: Made...

24

Characterization of the fate and transport of nitroaromatic compounds at a former DoD ordnance depot site  

SciTech Connect

The 975-acre Former Nansemond Ordnance Depot (FNOD) in Suffolk, Virginia was used by the Department of Defense (DoD) from 1917 until the mid-1950's for preparation, storage, transportation, inspection and demilitarization of many classes of ammunition and ordnance. Approximately 28 areas of Concern (AOC) have been identified by the EPA as areas that could pose potential risk to human health or the environment. The primary contaminants of concern are some trace metals and explosive compounds. During a summer 1987 field investigation, a slab of crystalline TNT was found which was estimated to weigh several tons. An enhanced MODFLOW model is being used to identify subsurface flow patterns. The calibrated model will be used to identify contaminant fate and transport behavior at the site. Enhancements to the MODFLOW model include an updated block-centered flow package (BCF4) and an updated recharge-seepage face boundary package (RSF4) to utilize for the FNOD site flow characterization. BCF4 package accurately delineates the water table without relying on an ad hoc rewetting procedure. This is accomplished by calculating the hydraulic head value required to transmit recharging water through the unsaturated zone without inactivating dry cells. The recharge-seepage face package eliminates the projection of heads above the ground surface by adjusting recharge to a cell when a user supplied ponding depth is reached. Using a regional model, a telescoping grid refinement technique was implemented to calculate the boundary conditions around the area of interest and to model quantity and quality interactions between surface and subsurface water regimes in a realistic manner.

Klausmeier, M.E.; Yoon, J.

1999-07-01T23:59:59.000Z

25

DOE - Office of Legacy Management -- Naval Ordnance Test Station - CA 06  

NLE Websites -- All DOE Office Websites (Extended Search)

Ordnance Test Station - CA 06 Ordnance Test Station - CA 06 FUSRAP Considered Sites Site: NAVAL ORDNANCE TEST STATION (CA.06) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: China Lake Naval Weapons Center Salt Wells Pilot Plant CA.06-1 Location: Inyokern , California CA.06-1 Evaluation Year: 1987 CA.06-1 Site Operations: Naval facility; experimental development work on shape charges and quality castings on a pilot plant scale. CA.06-1 Site Disposition: Eliminated - No indication that radioactive materials were handled at the site CA.06-1 Radioactive Materials Handled: None Indicated CA.06-1 Primary Radioactive Materials Handled: None CA.06-1 Radiological Survey(s): No Site Status: Eliminated from consideration under FUSRAP Also see

26

Date Stamped/Typed Centered  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4-C 4-C NEPA ID No.: PXP-10-0008 Demolition of Building 12-2B Application of DOE NEPA Procedure: Categorical Exclusion B1.23, Applicable to Facility Operations (10 CFR Part 1021, Subpart D, Appendix B), applies to the proposed activity described below. Rationale: The U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA), proposes to demolish Building 12-2B and reduce the Pantex Plant footprint by 3,181 square feet. Project tasks include preparing and approving Planning Documents, removing building furnishings and contents, cutting, capping, and rerouting utilities associated with the structure, razing the structure, reworking/closing masonry wall at door opening, recycling uncontaminated concrete and metal, disposing of waste, and backfilling and restoring the area

27

Disposal of Explosive Ordnances by Use of a Bimanual Haptic Telepresence System  

E-Print Network (OSTI)

ordnance disposal (EOD). Typical task scenar- ios are related to law enforcement, counter.g. [4], [5]). This type of telerobotic system enables execution of prepara- tory operations for EOD the development of tech- nologies to perform EOD by telepresent control as depicted in Fig. 1b. A corresponding

Steinbach, Eckehard

28

Nitrided Metallic Bipolar Plates  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to meet 5000 h automotive durability goal at cost < 5kW Year 1 Goals: Single-cell fuel cell test performance for 25 cm 2 stamped and nitrided metallic bipolar plates...

29

A Survey of Commercially Available and Proven Remote Control Machines for Excavation and Recovery of Buried Ordnance  

SciTech Connect

The issue of unexploded ordnance excavation and removal is complicated by the interaction between the independent robotics systems (e.g. manipulator, sensors, and software). A review of commercially available robotic systems highlights the specificity of the design and intent of each for the application and problem being addressed. Although multiple parties, including universities, research institutes, and manufacturers worldwide are concerned with removing explosive ordnance (EOD) and unexploded ordnance (UXO), the exact details of the problems and tasks at each site differ between projects, even slightly. The risks associated with the excavation and removal of ordnance require a level of robustness that necessitates extensive testing and engineering despite project similarities. Based on the experience of researchers, the integration of systems at unique excavation sites will be the critical element of the project to ensure the safe and robust removal of buried ordnance. Although this report touches on some systems integration issues to a limited degree, the report at this stage is primarily a survey of commercially available, proven robotics components and systems for the excavation and recovery of buried ordnance.

Pruneda, C; Bilstrom, A

2002-03-01T23:59:59.000Z

30

DOE - Office of Legacy Management -- Naval Ordnance Plant - MI 0-03  

Office of Legacy Management (LM)

Plant - MI 0-03 Plant - MI 0-03 FUSRAP Considered Sites Site: NAVAL ORDNANCE PLANT (MI.0-03) Eliminated from further consideration under FUSRAP - Referred to DoD for action Designated Name: Not Designated Alternate Name: None Location: Centerline , Michigan MI.0-03-1 Evaluation Year: 1987 MI.0-03-1 Site Operations: Assembled bomb components. MI.0-03-1 Site Disposition: Eliminated - No Authority - Referred to DoD MI.0-03-1 Radioactive Materials Handled: None Indicated Primary Radioactive Materials Handled: None Radiological Survey(s): None Indicated Site Status: Eliminated from further consideration under FUSRAP - Referred to DoD for action MI.0-03-1 Also see Documents Related to NAVAL ORDNANCE PLANT MI.0-03-1 - DOE Letter; J.Fiore to C.Shafer; Subject: Information on

31

Radiological assessment of depleted uranium migration offsite from an ordnance range  

SciTech Connect

The military utilizes ordnance loaded with depleted uranium in order to maximize armor penetrating capabilities. These weapons are tested on open ranges where the weapons are fired through a cloth target and impact into the soil. This paper examines the potential environmental impact from use of depleted uranium in an open setting. A preliminary pathway analysis was performed to examine potential routes of exposure to nonhuman species in the vicinity and ultimately to man. Generic data was used in the study to estimate the isotopic mix and weight of the ordnance. Key factors in the analysis included analyzing the physics of weapon impact on soil, chemical changes in material upon impact, and mechanisms of offsite transport (including atmospheric and overland transport). Non-standard exposure scenarios were investigated, including the possibility of offsite contaminant transport due to range grassfires. Two radiological assessment codes, MEPAS (Multi media Environmental Pollutant Assessment System) and RESRAD were used to help analyze the scenarios.

Rynders, D.G. [Oregon State Univ., Corvallis, OR (United States)

1996-06-01T23:59:59.000Z

32

RCRA closure of an explosive ordnance disposal (EOD) range, Wright-Patterson Air Force Base, Ohio: Circumstances leading to a risk based approach  

SciTech Connect

After approximately 40 years of operation of an Explosive Ordnance Disposal (EOD) Range at Wright-Patterson Air Force Base (WPAFB) near Dayton, Ohio, operations were suspended in late 1990 by the Ohio Environmental Protection Agency (OEPA). The closure of several notice of violations and reopening of the EOD Range were the initial objectives, but in 1995 a formal commitment for RCRA closure was made. The EOD Range, used for disposal of ordnance via open burning and open detonation, is a fenced 5 acre site and is located in a 100 year flood plain. Investigations performed in 1991 through 1994 to fully characterize the site indicated the presence of heavy metals and petroleum contamination in soils. Of particular concern were elevated levels of arsenic and lead. Localized remediations were attempted in 1993, but because of continued disagreement on cleanup levels with OEPA, these remediations were unsuccessful. Strict interpretation of OEPA RCRA closure guidance would have required the removal of soil from the entire five acre EOD Range to a depth of 4--5 feet, at a cost of approximately $6,000,000. However, in early 1995 a partnering session held with OEPA led to an improved regulatory relationship with OEPA. This improved relationship, along with new information compiled on industrial background concentrations of heavy metals at RCRA sites in Ohio, and emerging OEPA guidance on broader risk ranges for closure may prove to be key in reducing closure requirements. A draft Closure Plan has been submitted to OEPA which proposes a risk-based approach for closure. The plan is currently under review by OEPA. If approved, the AF could realize a substantial savings of greater than $5,000,000. This paper details the sequence of events in performing a RCRA closure at the EOD range, including the site conditions and field activities, and the evolution of closure requirements.

Tumbusch, C. [Air Force, Wright-Patterson AFB, OH (United States). Office of Environmental Management; Martin, J. [International Technology Corp., Cincinnati, OH (United States)

1997-12-31T23:59:59.000Z

33

STAMP: statistical analysis of taxonomic and functional profiles  

Science Journals Connector (OSTI)

......White et al., 2009) are provided for comparing profiles organized into two groups. STAMP implements the ANOVA and Kruskal-Wallis H-test for comparing three or more groups of profiles. Statistically significant features can be further examined......

Donovan H. Parks; Gene W. Tyson; Philip Hugenholtz; Robert G. Beiko

2014-11-01T23:59:59.000Z

34

Potential technologies based on stamped periodic nanoparticle array  

E-Print Network (OSTI)

A stamped nanoparticle array patterning technology integrating interference lithography, self assembly and soft lithography is assessed. This technology is capable of parallel patterning of nanoparticles at a large scale. ...

Wang, Zongbin

2009-01-01T23:59:59.000Z

35

Environmental implications of explosive ordnance disposal open burn/open detonation operations  

SciTech Connect

The United States Army created their first Explosive Ordnance Disposal (EOD) teams in 1941, primarily to deal with the possibility of unexploded ordnance in occupied areas. Training with the British, who had developed a strong EOD program in response to the air raids on their cities and military installations, the Army teams concentrated on the safety of the technician and the local population. The gradual advent of Environmental laws since the 1970s was largely unnoticed by the EOD community, whose operatives continued to value safety over environmental considerations. Now, the Army is faced with sites throughout the country that were used as EOD areas or impact areas that need to be investigated and decontaminated before installations are turned over for public use. Records of the OB/OD activities conducted on these ranges are often sketchy or nonexistent, since the personnel performing the work were not required to keep detailed records. To develop the site investigation or initiate closure plans needed to clean these areas, it is necessary to know how EOD operations historically have been conducted. The specific methods which have been used by EOD technicians for the past 50 years vary by the types of explosives available and the types of munitions to be disposed of. The residues left by the operation would therefore vary, which would change the methods by which a site investigation should be conducted.

Steen, C. [EMCON Alaska, Inc., Anchorage, AK (United States); Seutter, C.C. [Explosive Disposal Engineering and Technology, Wasilla, AK (United States)

1994-12-31T23:59:59.000Z

36

LED Traffic Lights Get Buy American Stamp | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Traffic Lights Get Buy American Stamp LED Traffic Lights Get Buy American Stamp LED Traffic Lights Get Buy American Stamp November 30, 2010 - 10:19am Addthis Red. Yellow. Green. What LED traffic signals don't say: Made in USA. That is changing. Dialight Corporation, an LED lighting manufacturer with U.S. corporate offices in Farmingdale, New Jersey, and a parent company based in the U.K., invested nearly $3 million into renovating their 75,000-square-foot production facility in Roxboro, North Carolina. With these improvements, Dialight's Roxboro plant is projected to scale up production by 400 percent. "Bringing manufacturing back to America is a win-win scenario," said Roy Burton, Dialight's Group Chief Executive. "We're helping the economy by creating new jobs, and at the same time we're finding it more

37

LED Traffic Lights Get Buy American Stamp | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LED Traffic Lights Get Buy American Stamp LED Traffic Lights Get Buy American Stamp LED Traffic Lights Get Buy American Stamp November 29, 2010 - 10:00am Addthis LED traffic lights are assembled at Dialight’s factory in Roxboro, N.C. The company has expanded production at the facility, adding more than 100 jobs over the past two years. | Photo Courtesy of Dialight LED traffic lights are assembled at Dialight's factory in Roxboro, N.C. The company has expanded production at the facility, adding more than 100 jobs over the past two years. | Photo Courtesy of Dialight Lindsay Gsell LED traffic lights are assembled at Dialight's factory in Roxboro, N.C. The company has expanded production at the facility, adding more than 100 jobs over the past two years. Red. Yellow. Green. What LED traffic signals don't say: Made in USA.

38

Stamp out energy waste | ENERGY STAR Buildings & Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Stamp out energy waste Stamp out energy waste Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In this section Learn the benefits Get started Use Portfolio Manager Save energy Stamp out energy waste Find cost-effective investments Engage occupants Purchase energy-saving products Put computers to sleep Get help from an expert Take a comprehensive approach Install renewable energy systems

39

A Review of "'The Furie of the Ordnance' Artillery in the English Civil Wars" by Stephen Bull  

E-Print Network (OSTI)

reviews 201 Stephen Bull. ?The Furie of the Ordnance? Artillery in the English Civil Wars. Woodbridge, England: The Boydell Press, 2008. xxiii + 243 pp. + 27 illus. $95.00. Review by edward m. furgol, naval historical center. Bull has... war that lasted not just one, but five campaigning seasons. In 1648-51 Parliament?s already substantial edge developed further, helping overwhelm its opponents. reviews 203 The volume is based on meticulous research in the primary...

Furgol, Edward M

2010-01-01T23:59:59.000Z

40

AHSS Stamping Project ? A/SP 050; Nonlinear Strain Paths Project...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Nonlinear Strain Paths Advanced High-Strength Steel Stamping Characterization of Thermo-Mechanical Behaviors of Advanced High Strength Steels (AHSS)...

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

ENVIRONMENTALLY BENIGN LINERLESS SELF-ADHESIVE COIL STAMPS: R&D AND RECYCLING STUDIES  

E-Print Network (OSTI)

ENVIRONMENTALLY BENIGN LINERLESS SELF-ADHESIVE COIL STAMPS: R&D AND RECYCLING STUDIES Kim K been easy and quick to use, and have offered consistent adhesion. For recyclers, however, these adhesive stamps have caused concern for their paper recycling processes. In addition, there is the issue

Abubakr, Said

42

STAMP-Based Analysis of a Refinery Overflow Accident Nancy Leveson, Margaret Stringfellow, and John Thomas  

E-Print Network (OSTI)

1 STAMP-Based Analysis of a Refinery Overflow Accident Nancy Leveson, Margaret Stringfellow, and John Thomas As an example of STAMP, we have taken an accident report produced for a real refinery failures and operator actions (or missing actions) related to the loss. But stopping after identifying

Leveson, Nancy

43

Effect of meteorological data averaging times on plume concentrations from explosive ordnance disposal open burning operations. Master`s thesis  

SciTech Connect

Explosive Ordnance Disposal (EOD) Open Burning (OB) operations are performed to treat and dispose of unserviceable munitions in the Department of Defense (DOD) inventory. This thesis effort sought to develop a computer model, based upon the Gaussian Puff Equation. The model varies from standard plume modeling practices by not making the assumption that the wind direction, wind speed and turbulence are uniform throughout the duration of the burn. The model assigns meteorological data to each explosion (puff) generated by the OB source. The experiments in this research effort assigned meteorological data to the puffs based upon averaging the weather data over 1, 10, and 60 minute periods. The results of the research showed that there was a statistically significant difference (95% confidence) between 1 minute and 60 minute weather data plume concentrations in the receptor grid in 100% of the experiments performed.

Widmann, I.L.

1995-12-01T23:59:59.000Z

44

Precision control of cylindrical stamp contact in a continuous roll-to-roll microcontact printing machine  

E-Print Network (OSTI)

Microcontact printing is a form of soft lithography that uses a molded elastomeric stamp to print patterns with micron and sub-micron scale features. This is an effective low-cost technique for replicating master patterns ...

Libert, Adam M. (Adam Marcus)

2014-01-01T23:59:59.000Z

45

New Independent Analysis Confirms Climate Bill Costs About a Postage Stamp  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Independent Analysis Confirms Climate Bill Costs About a Independent Analysis Confirms Climate Bill Costs About a Postage Stamp a Day New Independent Analysis Confirms Climate Bill Costs About a Postage Stamp a Day August 4, 2009 - 12:00am Addthis Washington, D.C. - A new analysis by the independent, non-partisan Energy Information Agency confirms findings by earlier reports from the Congressional Budget Office and the Environmental Protection Agency that the Waxman-Markey energy and climate legislation will cost Americans roughly the same as a postage stamp a day. The EIA analysis projects an increased cost of about $83 (adjusted for inflation) by 2030 -- or roughly 23 cents a day. Energy Secretary Steven Chu made the following statement: "This new, independent and highly respected analysis confirms the findings

46

Numerical simulation of temperature field, microstructure evolution and mechanical properties of HSS during hot stamping  

SciTech Connect

The hot stamping of boron steels is widely used to produce ultra high strength automobile components without any spring back. The ultra high strength of final products is attributed to the fully martensitic microstructure that is obtained through the simultaneous forming and quenching of the hot blanks after austenization. In the present study, a mathematical model incorporating both heat transfer and the transformation of austenite is presented. A FORTRAN program based on finite element technique has been developed which permits the temperature distribution and microstructure evolution of high strength steel during hot stamping process. Two empirical diffusion-dependent transformation models under isothermal conditions were employed respectively, and the prediction capability on mechanical properties of the models were compared with the hot stamping experiment of an automobile B-pillar part.

Shi, Dongyong; Liu, Wenquan [Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian, 116024, P.R. (China); Ying, Liang, E-mail: pinghu@dlut.edu.cn; Hu, Ping, E-mail: pinghu@dlut.edu.cn; Shen, Guozhe [Key Laboratory of Structural Analysis for Industrial Equipment, School of Automotive Engineering, Dalian University of Technology, Dalian, 116024, P.R. (China)

2013-12-16T23:59:59.000Z

47

Millimeter-scale contact printing of aqueous solutions using a stamp made out of paper and tape  

E-Print Network (OSTI)

three-dimensional, microfluidic, paper-based analyt- ical devices (3D-mPADs) as ``stamps'' (eMillimeter-scale contact printing of aqueous solutions using a stamp made out of paper and tape This communication describes a simple method for printing aqueous solutions with millimeter-scale patterns

Prentiss, Mara

48

The direct economic effects of a policy to provide government subsidized price discounts for the purchase of fruit and vegetable by food stamp recipients.  

E-Print Network (OSTI)

for the purchase of fruit and vegetable by food stamp recipients. by Karen M. Jetter Assistant Research Economist price discounts on fresh fruit and vegetable to food stamp recipients. The suggestion for a price discount on fruit and vegetable for food stamps recipients is contained in the 2004 Farm Bill, section 4116

California at Davis, University of

49

Announcing the 2012-2013 Energy Innovation Contest for undergraduates to stamp out carbon emissions on  

E-Print Network (OSTI)

the best innovative plans to reduce student energy consumption and promote eco-friendly practices April 1, 2013. Read more... go to Energy Contest page at http://rei.rutgers.edu/ Check us out at www.facebook.com/RutgersEnergyAnnouncing the 2012-2013 Energy Innovation Contest for undergraduates to stamp out carbon emissions

Garfunkel, Eric

50

Enhanced signal processing algorithms for buried unexploded ordnance detection and location estimation with magnetometer and electromagnetic induction measurements  

SciTech Connect

Enhanced signal processing algorithms have been developed for the detection and location of buried unexploded ordnance using magnetometry and electromagnetic induction (EMI) measurements. These signal processing algorithms are related to those used to image with geophysical diffraction tomography (GDT) employing wave-based measurements. The underlying relationship of GDT is the Generalized Projection Slice Theorem (GPST) that relates the spatial Fourier transform of acquired data to the spatial Fourier transform of subsurface inhomogeneities of one higher dimension. This relationship can be used to simulate data templates for known targets and, by virtue of the shift property of Fourier transforms, a data simulation need only be computed for one reference target location. All other target locations are generated by an appropriate phase shift. These data templates can be correlated with acquired data to determine the spatial distribution of probable target location. This approach to target detection and location estimation, referred to as a maximum likelihood estimation, can be used to produce an {open_quotes}image{close_quotes} of the likelihood of a specified target`s position. For non wave-based methods, the relationship between data and target characteristics is not strictly associated with Fourier transforms. In the case of magnetometry, the appropriate GPST requires a Fourier-Laplace transform of the target characteristics while the EMI GPST is based on an integral transform with a complex wavenumber. Nevertheless, the shift rule for integral transforms can be invoked to yield GPST`s for these tools and the associated computationally efficient maximum likelihood estimators. The EMI detection algorithm was applied to data acquired at a known underground storage tank site and the algorithms for both magnetometry and EMI were applied to data acquired at the Magnetic Range of the Naval EOD Tech Center in Indian Head, Maryland.

Witten, A.

1993-09-01T23:59:59.000Z

51

Remedial investigation concept plan for the groundwater operable units at the chemical plant area and the ordnance works area, Weldon Spring, Missouri  

SciTech Connect

The U.S. Department of Energy (DOE) and the U.S. Department of the Army (DA) are conducting cleanup activities at two properties--the DOE chemical plant area and the DA ordnance works area (the latter includes the training area)--located in the Weldon Spring area in St. Charles County, Missouri. These areas are on the National Priorities List (NPL), and cleanup activities at both areas are conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended. DOE and DA are conducting a joint remedial investigation (RI) and baseline risk assessment (BRA) as part of the remedial investigation/feasibility study (RI/FS) for the groundwater operable units for the two areas. This joint effort will optimize further data collection and interpretation efforts and facilitate overall remedial decision making since the aquifer of concern is common to both areas. A Work Plan issued jointly in 1995 by DOE and the DA discusses the results of investigations completed at the time of preparation of the report. The investigations were necessary to provide an understanding of the groundwater system beneath the chemical plant area and the ordnance works area. The Work Plan also identifies additional data requirements for verification of the evaluation presented.

NONE

1999-07-15T23:59:59.000Z

52

THE SCIOTO ORDNANCE PLANT  

Office of Legacy Management (LM)

InspectGr of Ordnancet rms Lloyd R. Ols% Chief Inspector Courtesy of Nary J. Rider Jordan 165 AL1 YPut Jl :l1 Ia 'V'di6 VW A APPENDIX 6 MED Briefing The following documents...

53

ConfChem Conference on A Virtual Colloquium to Sustain and Celebrate IYC 2011 Initiatives in Global Chemical Education: Global Stamp Competition  

Science Journals Connector (OSTI)

ConfChem Conference on A Virtual Colloquium to Sustain and Celebrate IYC 2011 Initiatives in Global Chemical Education: Global Stamp Competition ... Overwhelming Success of A Poster Competition. ...

Lida Schoen

2013-10-08T23:59:59.000Z

54

Plutonium metal and oxide container weld development and qualification  

SciTech Connect

Welds were qualified for a container system to be used for long-term storage of plutonium metal and oxide. Inner and outer containers are formed of standard tubing with stamped end pieces gas-tungsten-arc (GTA) welded onto both ends. The weld qualification identified GTA parameters to produce a robust weld that meets the requirements of the Department of Energy standard DOE-STD-3013-94, ``Criteria for the Safe Storage of Plutonium Metals and Oxides.``

Fernandez, R.; Horrell, D.R.; Hoth, C.W.; Pierce, S.W.; Rink, N.A.; Rivera, Y.M.; Sandoval, V.D.

1996-01-01T23:59:59.000Z

55

Single shot time stamping of ultrabright radio frequency compressed electron pulses  

SciTech Connect

We demonstrate a method of time-stamping Radio Frequency compressed electron bunches for Ultrafast Electron Diffraction experiments in the sub-pC regime. We use an in-situ ultra-stable photo-triggered streak camera to directly track the time of arrival of each electron pulse and correct for the timing jitter in the radio frequency synchronization. We show that we can correct for timing jitter down to 30 fs root-mean-square with minimal distortion to the diffraction patterns, and performed a proof-of-principle experiment by measuring the ultrafast electron-phonon coupling dynamics of silicon.

Gao, M.; Dwayne Miller, R. J. [Department of Chemistry and Physics, University of Toronto, Toronto, ON. M5S 3H6 (Canada); Max Planck Research Department for Structural Dynamics, Department of Physics, Center for Free Electron Laser Science, University of Hamburg, DESY, D-22607 Hamburg (Germany); Jiang, Y.; Kassier, G. H. [Max Planck Research Department for Structural Dynamics, Department of Physics, Center for Free Electron Laser Science, University of Hamburg, DESY, D-22607 Hamburg (Germany)

2013-07-15T23:59:59.000Z

56

Metabolic energy costs of USAF Explosive Ordnance Disposal render-safe procedures: Field determinations. Interim report, 1 Jun-1 Dec 87  

SciTech Connect

The primary mission of the USAF Explosive Ordnance Disposal (EOD) technicians is to render safe munition--conventional chemical, biological or nuclears--that pose a safety hazard during peacetime as well as wartime. The physical work is quite varied; a specific task may require only a few minutes with minimal physical effort, or may require many hours and be very physically demanding. This study measured the metabolic requirements of two EOD teams performing separate typical render safe procedures (RSO) on a chemical bomb. Data show the average work rate was between 0.68 and 0.80 liters of 02 per min for both RSP operations. This work requirement is considered moderate-to-hard, however, the EOD technician should be capable of performing this type of work on an extended daily basis without accumulating fatigue, provided there are no other external stresses. The extended duration and acute dexterity, both mental and physical, required for successful completion of an RSP operation add a unique and intangible level of difficulty to the metabolic requirements. The data from the present study represents an estimation of the energy required to perform a typical chemical operation RSP and should be useful in making management decisions regarding work tolerance for EOD technicians.

Kroch, L.P.

1991-05-01T23:59:59.000Z

57

Development and testing of neutron pulse time stamping data acquisition system for neutron noise experiment  

Science Journals Connector (OSTI)

Abstract Statistical correlation techniques find applications in the analysis of zero power reactor noise and in passive neutron assay (PNA). A large number of apparently different techniques have been in use in these application areas and traditionally the electronics modules used for data acquisition and analysis is specific to the method used. In this paper we describe a data acquisition scheme developed by us, which is independent of the specific analysis method and can therefore be used for all of them. This is a neutron time stamping data acquisition system based on a timer card and an interface software to acquire and store the data in the required format. The system has been successfully tested with two statistically different types of neutron sources, namely a random Poisson source (Pu–Be) and a correlated source (a nuclear reactor).

Rajeev Kumar; M Yakub Ali; S.B. Degweker; S.C. Vishwasrao; R.T. Jadhav

2015-01-01T23:59:59.000Z

58

Feasibility study for remedial action for the groundwater operable units at the chemical plant area and the ordnance works area, Weldon Spring, Missouri  

SciTech Connect

The U.S. Department of Energy (DOE) and the U.S. Department of Army (DA) are conducting an evaluation to identify the appropriate response action to address groundwater contamination at the Weldon Spring Chemical Plant (WSCP) and the Weldon Spring Ordnance Works (WSOW), respectively. The two areas are located in St. Charles County, about 48 km (30 rni) west of St. Louis. The groundwater operable unit (GWOU) at the WSCP is one of four operable units being evaluated by DOE as part of the Weldon Spring Site Remedial Action Project (WSSRAP). The groundwater operable unit at the WSOW is being evaluated by the DA as Operable Unit 2 (OU2); soil and pipeline contamination are being managed under Operable Unit 1 (OU1). Remedial activities at the WSCP and the WSOW are being conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). Consistent with DOE policy, National Environmental Policy Act (NEPA) values have been incorporated into the CERCLA process. A remedial investigation/feasibility study (RI/FS) work plan summarizing initial site conditions and providing site hydrogeological and exposure models was published in August of 1995 (DOE 1995). The remedial investigation (RI) and baseline risk assessment (BRA) have also recently been completed. The RI (DOE and DA 1998b) discusses in detail the nature, extent, fate, and transport of groundwater and spring water contamination. The BRA (DOE and DA 1998a) is a combined baseline assessment of potential human health and ecological impacts and provides the estimated potential health risks and ecological impacts associated with groundwater and springwater contamination if no remedial action were taken. This feasibility study (FS) has been prepared to evaluate potential options for addressing groundwater contamination at the WSCP and the WSOW. A brief description of the history and environmental setting of the sites is presented in Section 1.1, key information relative to the nature and extent of contamination is presented in Section 1.2, and the results of the BRA are summarized in Section 1.3. The objective of this FS is discussed in Section 1.4, and preliminary remediation goals are identified in Section 1.5. The organization of the remaining chapters of this FS is outlined in Section 1.6.

NONE

1999-07-15T23:59:59.000Z

59

An analysis of the effect of the food stamp program on family consumption behavior in the South of the United States  

E-Print Network (OSTI)

behavior in the South of the Uni. ed Sta+es (I'. 2y i 961 ) Viu ling Yeung, S. S. , exas Ahl" Univer sity; Cheirma. . o Advisory Commi. +ee: Dr. Jean -Paul Chaves The ob~ective of +his thesis is to study the effect of the food stamp program ( . S. P... or oonus food tamp income to the . '~!PC of cash income, we can determine whe+he- food stamps do con- strair. recipienc consumption behavior. But hIPC alone con- veys no information about what food. amourt would be con- sumed if cash were provided...

Yeung, Miu Ling

2012-06-07T23:59:59.000Z

60

UNCORRECTEDPROOF Please cite this article in press as: M. Grujicic et al., An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing  

E-Print Network (OSTI)

, Norbert Seyrb, Marc Erdmannc, Jochen Holzleitnerc 5 6 a Department of Mechanical Engineering, Clemson; (b) in-coil or stamped-part pre-coating for enhanced adhesion; and (c) chemical modifications; Automotive structural components23 24 1. Introduction1 Traditionally, metals and plastics have been fierce

Grujicic, Mica

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Stabilization of Electrocatalytic Metal Nanoparticles at Metal...  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrocatalytic Metal Nanoparticles at Metal-Metal Oxide-Graphene Triple Junction Points. Stabilization of Electrocatalytic Metal Nanoparticles at Metal-Metal Oxide-Graphene...

62

Theoretical and experimental study of the rule for heat transfer coefficient in hot stamping of high strength steels  

SciTech Connect

Heat transfer is a crucial aspect for hot stamping process, the fully austenitized boron steel blank with temperature about 900°C is transferred to the tool, then formed rapidly and quenched in the cooled tool. The desired fully martensitic transformation will happen only if the cooling rate exceeds a critical value approximately 27 K/s. During such process, the heat transfer coefficient (abbreviated as HTC) between the tool and blank plays a decisive role for the variation of the blank temperature. In this work, a theoretical formula based on the joint-roughness model is presented to describe the law of HTC, which relies on the roughness, hardness, and other material parameters of the tool and blank. Moreover, a non-contact temperature measuring system based on the infrared thermal camera is built to catch the temperature change course, and then the HTC value is derived through the inverse analysis. Based on the theoretical and experimental results, the change rule of HTC especially its dependence on the process pressure will be discussed in detail.

Han, Xianhong; Hao, Xin; Yang, Kun; Zhong, Yaoyao [Institute of Forming Technology and Equipment, Shanghai Jiao Tong University, 1954 Hua Shan Road, Shanghai, 200030 (China)

2013-12-16T23:59:59.000Z

63

Effect of Indian Medium Coking Coal on Coke Quality in Non-recovery Stamp Charged Coke Oven  

Science Journals Connector (OSTI)

Abstract The maximum possibility of utilizing the Indian coking coals and inferior grade coking coal for producing metallurgical coke through non-recovery stamp charging technology was investigated. Indian indigenous coals contained low percent of vitrinite ( 15%) compared to imported coking coal. Therefore, the selection of appropriate proportion of different types of coals was a major challenge for coke makers. Coal blend selection criterion based on a single coefficient, named as composite coking potential (CCP), was developed. The use of increased proportion of semi-soft coal (crucible swelling number of 2.5) and high ash (? 15%) indigenous coal in the range of 20%–35% and 20%–65% respectively in the blends resulted in good quality of coke. Plant data of a non-recovery coke oven were used for developing and validating the model. The results showed that the coke strength after reaction (CSR) varied in the range of 63. 7%–67.7% and the M40 value was between 81.8 and 89.3 in both the cases.

H.P. Tiwari; P.K. Banerjee; V.K. Saxena; S.K. Haldar

2014-01-01T23:59:59.000Z

64

Metal Aminoboranes  

NLE Websites -- All DOE Office Websites (Extended Search)

Metal Aminoboranes Metal Aminoboranes Metal Aminoboranes Metal aminoboranes of the formula M(NH.sub.2BH.sub.3).sub.n have been synthesized. June 25, 2013 Metal Aminoboranes Metal aminoboranes of the formula M(NH.sub.2BH.sub.3).sub.n have been synthesized. Available for thumbnail of Feynman Center (505) 665-9090 Email Metal Aminoboranes Metal aminoboranes of the formula M(NH.sub.2BH.sub.3).sub.n have been synthesized. Metal aminoboranes are hydrogen storage materials. Metal aminoboranes are also precursors for synthesizing other metal aminoboranes. Metal aminoboranes can be dehydrogenated to form hydrogen and a reaction product. The reaction product can react with hydrogen to form a hydrogen storage material. Metal aminoboranes can be included in a kit. U.S. Patent No.: 7,713,506 (DOE S-112,798)

65

Metal inks  

DOE Patents (OSTI)

Self-reducing metal inks and systems and methods for producing and using the same are disclosed. In an exemplary embodiment, a method may comprise selecting metal-organic (MO) precursor, selecting a reducing agent, and dissolving the MO precursor and the reducing agent in an organic solvent to produce a metal ink that remains in a liquid phase at room temperature. Metal inks, including self-reducing and fire-through metal inks, are also disclosed, as are various applications of the metal inks.

Ginley, David S; Curtis, Calvin J; Miedaner, Alex; van Hest, Marinus Franciscus Antonius Maria; Kaydanova, Tatiana

2014-02-04T23:59:59.000Z

66

Metal Oxides  

Science Journals Connector (OSTI)

Metal oxides are the class of materials having the widest application in gas sensors. This chapter presents information related to the application of various metal oxides in gas sensors designed on different p...

Ghenadii Korotcenkov

2013-01-01T23:59:59.000Z

67

Silicone metalization  

DOE Patents (OSTI)

A system for providing metal features on silicone comprising providing a silicone layer on a matrix and providing a metal layer on the silicone layer. An electronic apparatus can be produced by the system. The electronic apparatus comprises a silicone body and metal features on the silicone body that provide an electronic device.

Maghribi, Mariam N. (Livermore, CA); Krulevitch, Peter (Pleasanton, CA); Hamilton, Julie (Tracy, CA)

2006-12-05T23:59:59.000Z

68

Metal oxide films on metal  

DOE Patents (OSTI)

A structure including a thin film of a conductive alkaline earth metal oxide selected from the group consisting of strontium ruthenium trioxide, calcium ruthenium trioxide, barium ruthenium trioxide, lanthanum-strontium cobalt oxide or mixed alkaline earth ruthenium trioxides thereof upon a thin film of a noble metal such as platinum is provided.

Wu, Xin D. (Los Alamos, NM); Tiwari, Prabhat (Los Alamos, NM)

1995-01-01T23:59:59.000Z

69

Expandable Metal Liner For Downhole Components  

DOE Patents (OSTI)

A liner for an annular downhole component is comprised of an expandable metal tube having indentations along its surface. The indentations are formed in the wall of the tube either by drawing the tube through a die, by hydroforming, by stamping, or roll forming and may extend axially, radially, or spirally along its wall. The indentations accommodate radial and axial expansion of the tube within the downhole component. The tube is inserted into the annular component and deformed to match an inside surface of the component. The tube may be expanded using a hydroforming process or by drawing a mandrel through the tube. The tube may be expanded in such a manner so as to place it in compression against the inside wall of the component. The tube is useful for improving component hydraulics, shielding components from contamination, inhibiting corrosion, and preventing wear to the downhole component during use. It may also be useful for positioning conduit and insulated conductors within the component. An insulating material may be disposed between the tube and the component in order to prevent galvanic corrosion of the downhole component.

Hall, David R. (Provo, UT); Fox, Joe R. (Provo, UT)

2004-10-05T23:59:59.000Z

70

Metal Toxicity  

Science Journals Connector (OSTI)

Problems posed to plants by metal toxicity in the soils of the world are basically of two kinds. The first kind are of natural origin. These arise either as a consequence of the nature of the parent material f...

T. McNeilly

1994-01-01T23:59:59.000Z

71

Dendritic metal nanostructures  

DOE Patents (OSTI)

Dendritic metal nanostructures made using a surfactant structure template, a metal salt, and electron donor species.

Shelnutt, John A. (Tijeras, NM); Song, Yujiang (Albuquerque, NM); Pereira, Eulalia F. (Vila Nova de Gaia, PT); Medforth, Craig J. (Winters, CA)

2010-08-31T23:59:59.000Z

72

Composite metal membrane  

DOE Patents (OSTI)

A composite metal membrane including a first metal layer of Group IVB met or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof is provided together with a process for the recovery of hydrogen from a gaseous mixture including contacting a hydrogen-containing gaseous mixture with a first side of a nonporous composite metal membrane including a first metal of Group IVB metals or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof, and, separating hydrogen from a second side of the nonporous composite metal membrane.

Peachey, Nathaniel M. (Espanola, NM); Dye, Robert C. (Los Alamos, NM); Snow, Ronny C. (Los Alamos, NM); Birdsell, Stephan A. (Los Alamos, NM)

1998-01-01T23:59:59.000Z

73

Composite metal membrane  

DOE Patents (OSTI)

A composite metal membrane including a first metal layer of Group IVB met or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof is provided together with a process for the recovery of hydrogen from a gaseous mixture including contacting a hydrogen-containing gaseous mixture with a first side of a nonporous composite metal membrane including a first metal of Group IVB metals or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof, and, separating hydrogen from a second side of the nonporous composite metal membrane.

Peachey, N.M.; Dye, R.C.; Snow, R.C.; Birdsell, S.A.

1998-04-14T23:59:59.000Z

74

Mechanochemical processing for metals and metal alloys  

DOE Patents (OSTI)

A set of processes for preparing metal powders, including metal alloy powders, by ambient temperature reduction of a reducible metal compound by a reactive metal or metal hydride through mechanochemical processing. The reduction process includes milling reactants to induce and complete the reduction reaction. The preferred reducing agents include magnesium and calcium hydride powders. A process of pre-milling magnesium as a reducing agent to increase the activity of the magnesium has been established as one part of the invention.

Froes, Francis H. (Moscow, ID); Eranezhuth, Baburaj G. (Moscow, ID); Prisbrey, Keith (Moscow, ID)

2001-01-01T23:59:59.000Z

75

This document was downloaded on May 22, 2013 at 14:34:39 Author(s) Naval Postgraduate School (U.S.)  

E-Print Network (OSTI)

Ordnance Engineering 47 Jet Propulsion Ordnance 49 Metallurgical Ordnance 50 Chemical Ordnance 51 Special Electronics Engineering . . ,, ,, 84 Foreign Language. .Marine

76

Date Stamped/Typed Centered  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-C 3-C NEPA ID No.: PXP-10-0007 Demolition of Buildings 11-10 and 11-30 Application of DOE NEPA Procedure: Categorical Exclusion B1.23, Applicable to Facility Operations (10 CFR Part 1021, Subpart D, Appendix B), applies to the proposed activity described below. Rationale: The U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA), proposes to demolish Buildings 11-10 and 11-30 at the Pantex Plant. The overall objectives are to reduce Plant maintenance costs and reduce the Pantex Plant footprint by 3,144 square feet. Building 11-10 is approximately 929 square feet, single story, slab on grade, brick structure with a shingle roof. The interior of the building consists of only two rooms separated by a masonry wall. An asbestos

77

Date Stamped/Typed Centered  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-C 2-C NEPA ID No.: PXP-10-0004 Deactivation & Decommissioning of the North Compost Tent Application of DOE NEPA Procedure: Categorical Exclusion B1.23, Applicable to Facility Operations (10 CFR Part 1021, Subpart D, Appendix B), applies to the proposed activity. Rationale: The U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA), proposes to demolish Environmental Restoration's (ER) North Compost Tent, which was damaged by a storm in 2003 and has not been fully operational since then. It is considered unsalvageable by the Facility & Systems Design Department. Demolition will consist of: Removal of clay soil (approximately 1 foot deep) and two liners (polyvinylchloride and

78

Date Stamped/Typed Centered  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

D&D-10-001-C D&D-10-001-C NEPA ID No. PXP-10-0001 Amendment No. 10-010 Decontamination & Demolition of Residential and Farm Structures Application of DOE NEPA Procedure: Categorical Exclusions B1.23 and B6.1(c), Applicable to Facility Operations (10 CFR Part 1021, Subpart D, Appendix B), apply to the proposed activities. Therefore, neither an Environmental Assessment nor an Environmental Impact Statement is necessary for the activities described in Amendment No. 10-010 of NEPA Review Form (NRF) PXP-10-0001. Rationale: The U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA), recently acquired 1,526 acres of land to allow access for environmental monitoring and implementation of institutional controls. This property contains two homesteads - the former

79

Date Stamped/Typed Centered  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-C 2-C NEPA ID No.: PXP-11-0004 Operations Systems Development & Integration Application of DOE NEPA Procedure: The Categorical Exclusion B4.6, Applicable to Facility Operations (10 CFR Part 1021, Subpart D, Appendix B), applies to project number LIN- 11-002-C. Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA), Pantex Site Office, proposed an Operations Systems Development and Integration (OSD&I) project in Fiscal Year 2010, under project number LIN-10-001-C, to replace the existing functionality being performed by MRP-II/CAS. The project would enhance manufacturing operations utilizing modern software solutions. The project also would provide a technology refresh with added capability. NEPA Review Form PXP-10-0005 determined that

80

Date Stamped/Typed Centered  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-C 1-C NEPA ID No.: PXP-11-0002 HPFL Tank & Pump Replacement Application of DOE NEPA Procedure: Categorical Exclusion B1.15, Applicable to Facility Operations (10 CFR Part 1021, Subpart D, Appendix B), applies to this proposal. Therefore, neither an Environmental Assessment nor an Environmental Impact Statement is necessary for the activity described in NEPA Review Form (NRF) PXP-11-0002, which is hereby incorporated by reference. Rationale: The U.S. Department of Energy, National Nuclear Security Administration, proposes to construct and operate two new high pressure fire loop (HPFL) pump houses and tank facilities at the B&W Pantex Facility to replace aging existing facilities. Construction and staging areas would require approximately one acre of land disturbance for each facility.

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Date Stamped/Typed Centered  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

09-C 09-C NEPA ID No.: PXP-11-0006 Environmental Restoration & Waste Mgt. Activities, FY 2012-2013 Application of DOE NEPA Procedure: The Categorical Exclusions B6.1 and B6.2, Applicable to Facility Operations (10 CFR Part 1021, Subpart D, Appendix B), apply to project number ESH-11-009-C. Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA), Pantex Site Office, proposes Environmental Restoration & Waste Management Activities for Fiscal Years 2012 and 2013 under project number ESH-11-009-C. These activities could include: Remedial actions, including design, construction, and operation of corrective measures (e.g., landfill covers and soil remediation activities);  Accelerated soil cleanups;

82

Date Stamped/Typed Centered  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

D&D-10-003-C D&D-10-003-C NEPA Amendment No.: 11-002 Demolition of Buildings 11-10 and 11-30 Application of DOE NEPA Procedure: Categorical Exclusion B1.23, Applicable to Facility Operations (10 CFR Part 1021, Subpart D, Appendix B), applies to the proposed activity described below. Rationale: The U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA), proposed to demolish Buildings 11-10 and 11-30 at the Pantex Plant, as described in NEPA Review Form (NRF) No. PXP-10-0007, which is hereby incorporated by reference. While removing the asphalt from the concrete slab at Building 11-30 during demolition, unknown concrete sumps, manholes, and drainage troughs were discovered. Removal of the sumps, manholes, and drainage troughs has been added to the scope of project no. D&D-10-003-

83

Metal-phosphate binders  

DOE Patents (OSTI)

A metal-phosphate binder is provided. The binder may include an aqueous phosphoric acid solution, a metal-cation donor including a metal other than aluminum, an aluminum-cation donor, and a non-carbohydrate electron donor.

Howe, Beth Ann [Lewistown, IL; Chaps-Cabrera, Jesus Guadalupe [Coahuila, MX

2009-05-12T23:59:59.000Z

84

Metal Hydrides - Science Needs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storage Grand Challenge Pre-Solicitation Meeting, June 19, 2003 1 Metal Hydrides - Science Needs TRADITIONAL METALLIC HYDRIDES: 1.5 to 2 wt.% H. Well studied. COMPLEX...

85

Probing metal solidification nondestructively  

NLE Websites -- All DOE Office Websites (Extended Search)

Probing metal solidification nondestructively This is the first time that high-energy protons have been used to nondestructively image a large metal sample during melting and...

86

Probing metal solidification nondestructively  

NLE Websites -- All DOE Office Websites (Extended Search)

Probing metal solidification nondestructively This is the first time that high-energy protons have been used to nondestructively image a large metal sample during melting...

87

Trending: Metal Oxo Bonds  

NLE Websites -- All DOE Office Websites (Extended Search)

Trending: Metal Oxo Bonds Trending: Metal Oxo Bonds Trending: Metal Oxo Bonds Print Wednesday, 29 May 2013 00:00 Metal oxides are important for scientific and technical applications in a variety of disciplines, including materials science, chemistry, and biology. Highly covalent metal-oxygen multiple bonds (metal oxos) are the building blocks of metal oxides and have a bearing on the oxide's desirable chemical, magnetic, electronic, and thermal properties. The lack of a more sophisticated grasp of bonding in metal oxides constitutes a roadblock to innovation in a wide variety of important emergent technologies, including industrial catalysis, biomimetic transformations, and artificial photosynthesis. To address this problem, a research team from four national laboratories, three Department of Energy synchrotron user facilities, and the University of Washington has applied spectroscopic and computational analyses to a number of metal oxides, quantifying trends in metal oxo bonding for groups of metals across the periodic table.

88

Heavy metal biosensor  

DOE Patents (OSTI)

Compositions and methods are provided for detection of certain heavy metals using bacterial whole cell biosensors.

Hillson, Nathan J; Shapiro, Lucille; Hu, Ping; Andersen, Gary L

2014-04-15T23:59:59.000Z

89

Trending: Metal Oxo Bonds  

NLE Websites -- All DOE Office Websites (Extended Search)

Trending: Metal Oxo Bonds Print Trending: Metal Oxo Bonds Print Metal oxides are important for scientific and technical applications in a variety of disciplines, including materials science, chemistry, and biology. Highly covalent metal-oxygen multiple bonds (metal oxos) are the building blocks of metal oxides and have a bearing on the oxide's desirable chemical, magnetic, electronic, and thermal properties. The lack of a more sophisticated grasp of bonding in metal oxides constitutes a roadblock to innovation in a wide variety of important emergent technologies, including industrial catalysis, biomimetic transformations, and artificial photosynthesis. To address this problem, a research team from four national laboratories, three Department of Energy synchrotron user facilities, and the University of Washington has applied spectroscopic and computational analyses to a number of metal oxides, quantifying trends in metal oxo bonding for groups of metals across the periodic table.

90

Trending: Metal Oxo Bonds  

NLE Websites -- All DOE Office Websites (Extended Search)

Trending: Metal Oxo Bonds Print Trending: Metal Oxo Bonds Print Metal oxides are important for scientific and technical applications in a variety of disciplines, including materials science, chemistry, and biology. Highly covalent metal-oxygen multiple bonds (metal oxos) are the building blocks of metal oxides and have a bearing on the oxide's desirable chemical, magnetic, electronic, and thermal properties. The lack of a more sophisticated grasp of bonding in metal oxides constitutes a roadblock to innovation in a wide variety of important emergent technologies, including industrial catalysis, biomimetic transformations, and artificial photosynthesis. To address this problem, a research team from four national laboratories, three Department of Energy synchrotron user facilities, and the University of Washington has applied spectroscopic and computational analyses to a number of metal oxides, quantifying trends in metal oxo bonding for groups of metals across the periodic table.

91

Trending: Metal Oxo Bonds  

NLE Websites -- All DOE Office Websites (Extended Search)

Trending: Metal Oxo Bonds Print Trending: Metal Oxo Bonds Print Metal oxides are important for scientific and technical applications in a variety of disciplines, including materials science, chemistry, and biology. Highly covalent metal-oxygen multiple bonds (metal oxos) are the building blocks of metal oxides and have a bearing on the oxide's desirable chemical, magnetic, electronic, and thermal properties. The lack of a more sophisticated grasp of bonding in metal oxides constitutes a roadblock to innovation in a wide variety of important emergent technologies, including industrial catalysis, biomimetic transformations, and artificial photosynthesis. To address this problem, a research team from four national laboratories, three Department of Energy synchrotron user facilities, and the University of Washington has applied spectroscopic and computational analyses to a number of metal oxides, quantifying trends in metal oxo bonding for groups of metals across the periodic table.

92

Trending: Metal Oxo Bonds  

NLE Websites -- All DOE Office Websites (Extended Search)

Trending: Metal Oxo Bonds Print Trending: Metal Oxo Bonds Print Metal oxides are important for scientific and technical applications in a variety of disciplines, including materials science, chemistry, and biology. Highly covalent metal-oxygen multiple bonds (metal oxos) are the building blocks of metal oxides and have a bearing on the oxide's desirable chemical, magnetic, electronic, and thermal properties. The lack of a more sophisticated grasp of bonding in metal oxides constitutes a roadblock to innovation in a wide variety of important emergent technologies, including industrial catalysis, biomimetic transformations, and artificial photosynthesis. To address this problem, a research team from four national laboratories, three Department of Energy synchrotron user facilities, and the University of Washington has applied spectroscopic and computational analyses to a number of metal oxides, quantifying trends in metal oxo bonding for groups of metals across the periodic table.

93

Metal-Air Batteries  

SciTech Connect

Metal-air batteries have much higher specific energies than most currently available primary and rechargeable batteries. Recent advances in electrode materials and electrolytes, as well as new designs on metal-air batteries, have attracted intensive effort in recent years, especially in the development of lithium-air batteries. The general principle in metal-air batteries will be reviewed in this chapter. The materials, preparation methods, and performances of metal-air batteries will be discussed. Two main metal-air batteries, Zn-air and Li-air batteries will be discussed in detail. Other type of metal-air batteries will also be described.

Zhang, Jiguang; Bruce, Peter G.; Zhang, Gregory

2011-08-01T23:59:59.000Z

94

Synthesis Of Fluorescent Metal Nanoclusters  

NLE Websites -- All DOE Office Websites (Extended Search)

Synthesis Of Fluorescent Metal Nanoclusters Synthesis Of Fluorescent Metal Nanoclusters Fluorescent metal nanoclusters were prepared. Available for thumbnail of Feynman Center...

95

Metal phthalocyanine catalysts  

DOE Patents (OSTI)

As a new composition of matter, alkali metal or ammonium or tetraalkylammonium diazidoperfluorophthalocyanatoferrate. Other embodiments of the invention comprise compositions wherein the metal of the coordination complex is cobalt, manganese and chromium.

Ellis, Jr., Paul E. (Downingtown, PA); Lyons, James E. (Wallingford, PA)

1994-01-01T23:59:59.000Z

96

MECS 2006- Fabricated Metals  

Energy.gov (U.S. Department of Energy (DOE))

Manufacturing Energy and Carbon Footprint for Fabricated Metals (NAICS 332) Sector with Total Energy Input, October 2012 (MECS 2006)

97

Deposition of Contiguous Metal Adlayer on Transition Metal Nanostructu...  

NLE Websites -- All DOE Office Websites (Extended Search)

and Abstract Primary Lab Date Application 20100099012 Application 20100099012 Electrocatalyst Synthesized by Depositing a Contiguous Metal Adlayer on Transition Metal...

98

Extraction process for removing metallic impurities from alkalide metals  

DOE Patents (OSTI)

A development is described for removing metallic impurities from alkali metals by employing an extraction process wherein the metallic impurities are extracted from a molten alkali metal into molten lithium metal due to the immiscibility of the alkali metals in lithium and the miscibility of the metallic contaminants or impurities in the lithium. The purified alkali metal may be readily separated from the contaminant-containing lithium metal by simple decanting due to the differences in densities and melting temperatures of the alkali metals as compared to lithium.

Royer, L.T.

1987-03-20T23:59:59.000Z

99

DOE - Office of Legacy Management -- Wabash River Ordnance Works...  

Office of Legacy Management (LM)

None Location: Newport , Indiana IN.03-1 Evaluation Year: 1987 IN.03-2 Site Operations: Produced heavy water for the MED in the mid-1940s. IN.03-1 Site Disposition: Eliminated -...

100

EFFECTS OF NAVAL ORDNANCE TESTS ON THE PATUXENT RIVER FISHERY  

E-Print Network (OSTI)

STATES DEPARTMENT OF THE INTERIOR FISH AND WILDLIFE SERVICE #12;EXPLANATORY NOTE The series embodies and to avoid delay in publication #12;United States Department of the Interior, Douglas McKay, Secretary, Fish of much speculation, but little study. Seismic surveys for coastal oil resources have been studied

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Sumitomo Metal Industries Ltd Sumitomo Metals | Open Energy Information  

Open Energy Info (EERE)

Sumitomo Metal Industries Ltd Sumitomo Metals Sumitomo Metal Industries Ltd Sumitomo Metals Jump to: navigation, search Name Sumitomo Metal Industries Ltd (Sumitomo Metals) Place Osaka-shi, Osaka, Japan Zip 540-0041 Sector Solar Product Engaged in the steel, engineering, and electronics businesses; works on fuel cell component technology and manufactures silicon wafers for the solar sector. References Sumitomo Metal Industries Ltd (Sumitomo Metals)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Sumitomo Metal Industries Ltd (Sumitomo Metals) is a company located in Osaka-shi, Osaka, Japan . References ↑ "Sumitomo Metal Industries Ltd (Sumitomo Metals)" Retrieved from "http://en.openei.org/w/index.php?title=Sumitomo_Metal_Industries_Ltd_Sumitomo_Metals&oldid=351744"

102

Photoactivated metal removal  

SciTech Connect

The authors propose the use of photochromic dyes as light activated switches to bind and release metal ions. This process, which can be driven by solar energy, can be used in environmental and industrial processes to remove metals from organic and aqueous solutions. Because the metals can be released from the ligands when irradiated with visible light, regeneration of the ligands and concentration of the metals may be easier than with conventional ion exchange resins. Thus, the process has the potential to be less expensive than currently used metal extraction techniques. In this paper, the authors report on their studies of the metal binding of spirogyran dyes and the hydrolytic stability of these dyes. They have prepared a number of spirogyrans and measured their binding constants for calcium and magnesium. They discuss the relationship of the structure of the dyes to their binding strengths. These studies are necessary towards determining the viability of this technique.

Nimlos, M.R.; Filley, J.; Ibrahim, M.A.; Watt, A.S.; Blake, D.M.

1999-07-01T23:59:59.000Z

103

Metal atomization spray nozzle  

DOE Patents (OSTI)

A spray nozzle for a magnetohydrodynamic atomization apparatus has a feed passage for molten metal and a pair of spray electrodes mounted in the feed passage. The electrodes, diverging surfaces which define a nozzle throat and diverge at an acute angle from the throat. Current passes through molten metal when fed through the throat which creates the Lorentz force necessary to provide atomization of the molten metal. 6 figures.

Huxford, T.J.

1993-11-16T23:59:59.000Z

104

Fabricated Metals (2010 MECS)  

Energy.gov (U.S. Department of Energy (DOE))

Manufacturing Energy and Carbon Footprint for Fabricated Metals Sector (NAICS 332) Energy use data source: 2010 EIA MECS (with adjustments) Footprint Last Revised: February 2014

105

EMSL - trace metals  

NLE Websites -- All DOE Office Websites (Extended Search)

trace-metals en Microbial Reductive Transformation of Phyllosilicate Fe(III) and U(VI) in Fluvial Subsurface Sediments. http:www.emsl.pnl.govemslwebpublications...

106

Silicon metal-semiconductor-metal photodetector  

DOE Patents (OSTI)

Silicon MSM photodiodes sensitive to radiation in the visible to near infrared spectral range are produced by altering the absorption characteristics of crystalline Si by ion implantation. The implantation produces a defected region below the surface of the silicon with the highest concentration of defects at its base which acts to reduce the contribution of charge carriers formed below the defected layer. The charge carriers generated by the radiation in the upper regions of the defected layer are very quickly collected between biased Schottky barrier electrodes which form a metal-semiconductor-metal structure for the photodiode.

Brueck, Steven R. J. (Albuquerque, NM); Myers, David R. (Albuquerque, NM); Sharma, Ashwani K. (Albuquerque, NM)

1997-01-01T23:59:59.000Z

107

Silicon metal-semiconductor-metal photodetector  

DOE Patents (OSTI)

Silicon MSM photodiodes sensitive to radiation in the visible to near infrared spectral range are produced by altering the absorption characteristics of crystalline Si by ion implantation. The implantation produces a defected region below the surface of the silicon with the highest concentration of defects at its base which acts to reduce the contribution of charge carriers formed below the defected layer. The charge carriers generated by the radiation in the upper regions of the defected layer are very quickly collected between biased Schottky barrier electrodes which form a metal-semiconductor-metal structure for the photodiode.

Brueck, Steven R. J. (Albuquerque, NM); Myers, David R. (Albuquerque, NM); Sharma, Ashwani K. (Albuquerque, NM)

1995-01-01T23:59:59.000Z

108

Symmetry reduction of metal phthalocyanines on metals  

Science Journals Connector (OSTI)

The temperature-dependent adsorption behavior of fourfold symmetric metal phthalocyanines (MPcs) on metals with commensurate and incommensurate symmetries was investigated by scanning tunneling microscopy. On the fourfold symmetric Cu(100) surface, planar and fourfold molecular structures in two equivalent orientations were found for MPcs when prepared at room temperature. In addition, two metastable orientations were identified when prepared at low temperature, which can be depopulated upon annealing. MPcs adsorbed on the sixfold symmetric Cu(111) surface showed a disturbed molecular appearance. The symmetry of molecular structures changed from fourfold to twofold, which is discussed in terms of molecule-substrate interaction.

Shih-Hsin Chang; Stefan Kuck; Jens Brede; Leonid Lichtenstein; Germar Hoffmann; Roland Wiesendanger

2008-12-29T23:59:59.000Z

109

PHYTOEXTRACTION OF HEAVY METALS  

E-Print Network (OSTI)

) Type of phytoremediation Cost effective form of environmental remediation (Glass 1999) Chelating Agents: desorb heavy metals from soil matrix and form water-soluble metal complexes (Shen et al -using hyperaccumulator plant biomass to produce a bio-ore for commercial use -Li et al. look at using Ni

Blouin-Demers, Gabriel

110

Metallization of fluid hydrogen  

Science Journals Connector (OSTI)

...P. Tunstall Metallization of fluid hydrogen W. J. Nellis 1 A. A. Louis 2 N...The electrical resistivity of liquid hydrogen has been measured at the high dynamic...which structural changes are paramount. hydrogen|metallization of hydrogen|liquid...

1998-01-01T23:59:59.000Z

111

Electroreflectance in Metals  

Science Journals Connector (OSTI)

Calculations have been made which suggest that the prominent maximum in the electroreflectance spectra of metals observed by Feinleib is not due to modulation of the optical constants of the electrolyte, but to modulation of the optical constants of the metal.

Arnold Prostak and Wilford N. Hansen

1967-08-15T23:59:59.000Z

112

Production of magnesium metal  

SciTech Connect

A process of producing magnesium metal includes providing magnesium carbonate, and reacting the magnesium carbonate to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The carbon dioxide is used as a reactant in a second process. In another embodiment of the process, a magnesium silicate is reacted with a caustic material to produce magnesium hydroxide. The magnesium hydroxide is reacted with a source of carbon dioxide to produce magnesium carbonate. The magnesium carbonate is reacted to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The invention further relates to a process for production of magnesium metal or a magnesium compound where an external source of carbon dioxide is not used in any of the reactions of the process. The invention also relates to the magnesium metal produced by the processes described herein.

Blencoe, James G. (Harriman, TN) [Harriman, TN; Anovitz, Lawrence M. (Knoxville, TN) [Knoxville, TN; Palmer, Donald A. (Oliver Springs, TN) [Oliver Springs, TN; Beard, James S. (Martinsville, VA) [Martinsville, VA

2010-02-23T23:59:59.000Z

113

Metal-Nonmetal Transition in Metal-Ammonia Solutions  

Science Journals Connector (OSTI)

A review is given of the properties of metal-ammonia solutions together with a summary of the evidence for the existence of a metal-nonmetal transition.

J. C. THOMPSON

1968-10-01T23:59:59.000Z

114

Liquid metal electric pump  

DOE Patents (OSTI)

An electrical pump for pumping liquid metals to high pressures in high temperature environments without the use of magnets or moving mechanical parts. The pump employs a non-porous solid electrolyte membrane, typically ceramic, specific to the liquid metal to be pumped. A DC voltage is applied across the thickness of the membrane causing ions to form and enter the membrane on the electrically positive surface, with the ions being neutralized on the opposite surface. This action provides pumping of the liquid metal from one side of the non-porous solid electrolyte membrane to the other. 3 figs.

Abbin, J.P.; Andraka, C.E.; Lukens, L.L.; Moreno, J.B.

1992-01-14T23:59:59.000Z

115

Divalent metal nanoparticles  

E-Print Network (OSTI)

Metal nanoparticles hold promise for many scientific and technological applications, such as chemical and biological sensors, vehicles for drug delivery, and subdiffraction limit waveguides. To fabricate such devices, a ...

DeVries, Gretchen Anne

2008-01-01T23:59:59.000Z

116

Metal stocks and sustainability  

Science Journals Connector (OSTI)

...dissipated through corrosion and wear, and some enters waste repositories...landfills. Dissipation from wear and corrosion is generally small...dispersion of metals from wear and corrosion is an important...transportation (railroad, marine, aircraft, and aerospace equipment...

R. B. Gordon; M. Bertram; T. E. Graedel

2006-01-01T23:59:59.000Z

117

Oligocyclopentadienyl transition metal complexes  

SciTech Connect

Synthesis, characterization, and reactivity studies of oligocyclopentadienyl transition metal complexes, namely those of fulvalene, tercyclopentadienyl, quatercyclopentadienyl, and pentacyclopentadienyl(cyclopentadienyl) are the subject of this account. Thermal-, photo-, and redox chemistries of homo- and heteropolynuclear complexes are described.

de Azevedo, Cristina G.; Vollhardt, K. Peter C.

2002-01-18T23:59:59.000Z

118

Excitons in Metals  

Science Journals Connector (OSTI)

It is shown that exciton states exist in metals, occurring near the interband threshold in optical absorption and substantially altering the shape and strength of the absorption edge. Their relation to the corresponding donor states is discussed.

G. D. Mahan

1967-03-20T23:59:59.000Z

119

Lithium metal reduction of plutonium oxide to produce plutonium metal  

DOE Patents (OSTI)

A method is described for the chemical reduction of plutonium oxides to plutonium metal by the use of pure lithium metal. Lithium metal is used to reduce plutonium oxide to alpha plutonium metal (alpha-Pu). The lithium oxide by-product is reclaimed by sublimation and converted to the chloride salt, and after electrolysis, is removed as lithium metal. Zinc may be used as a solvent metal to improve thermodynamics of the reduction reaction at lower temperatures. Lithium metal reduction enables plutonium oxide reduction without the production of huge quantities of CaO--CaCl.sub.2 residues normally produced in conventional direct oxide reduction processes.

Coops, Melvin S. (Livermore, CA)

1992-01-01T23:59:59.000Z

120

Metallic glass composition  

DOE Patents (OSTI)

A metallic glass alloy that is either iron-based or nickel-based or based on a mixture of iron and nickel, containing lesser amounts of elements selected from the group boron, silicon carbon and phosphorous to which is added an amount of a ductility enhancing element selected from the group cerium, lanthanum, praseodymium and neodymium sufficient to increase ductility of the metallic glass upon annealing.

Kroeger, Donald M. (Knoxville, TN); Koch, Carl C. (Raleigh, NC)

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Molten metal reactors  

DOE Patents (OSTI)

A molten metal reactor for converting a carbon material and steam into a gas comprising hydrogen, carbon monoxide, and carbon dioxide is disclosed. The reactor includes an interior crucible having a portion contained within an exterior crucible. The interior crucible includes an inlet and an outlet; the outlet leads to the exterior crucible and may comprise a diffuser. The exterior crucible may contain a molten alkaline metal compound. Contained between the exterior crucible and the interior crucible is at least one baffle.

Bingham, Dennis N; Klingler, Kerry M; Turner, Terry D; Wilding, Bruce M

2013-11-05T23:59:59.000Z

122

Functionalized Silicone Nanospheres: Synthesis, Transition Metal...  

NLE Websites -- All DOE Office Websites (Extended Search)

Functionalized Silicone Nanospheres: Synthesis, Transition Metal Immobilization, and Catalytic Applications. Functionalized Silicone Nanospheres: Synthesis, Transition Metal...

123

Liquid metal thermal electric converter  

DOE Patents (OSTI)

A liquid metal thermal electric converter which converts heat energy to electrical energy. The design of the liquid metal thermal electric converter incorporates a unique configuration which directs the metal fluid pressure to the outside of the tube which results in the structural loads in the tube to be compressive. A liquid metal thermal electric converter refluxing boiler with series connection of tubes and a multiple cell liquid metal thermal electric converter are also provided.

Abbin, Joseph P. (Albuquerque, NM); Andraka, Charles E. (Albuquerque, NM); Lukens, Laurance L. (Albuquerque, NM); Moreno, James B. (Albuquerque, NM)

1989-01-01T23:59:59.000Z

124

High-Temperature Zirconia Oxygen Sensor with Sealed Metal/Metal...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High-Temperature Zirconia Oxygen Sensor with Sealed MetalMetal Oxide Internal Reference High-Temperature Zirconia Oxygen Sensor with Sealed MetalMetal Oxide Internal Reference...

125

Transition-Metal Hydrides  

NLE Websites -- All DOE Office Websites (Extended Search)

Transition-Metal Hydride Electrochromics Transition-Metal Hydride Electrochromics A new type of electrochromic hydride material has interesting and unusual properties. Thin Ni-Mg films, for example, are mirror-like in appearance and have very low visible transmittance. On exposure to hydrogen gas or on reduction in alkaline electrolyte, the films become transparent. The transition is believed to result from formation of nickel magnesium hydride, Mg2NiH4. Switchable mirrors based on rare earth hydrides were discovered in 1996 at Vrije University in the Netherlands, Rare earth-magnesium alloy films were subsequently found to be superior to the pure lanthanides in maximum transparency and mirror-state reflectivity by Philips Laboratories. The newer transition-metal types which use less expensive and less reactive materials were discovered at LBNL. This has now become a very active area of study with a network of researchers.

126

Hard metal composition  

DOE Patents (OSTI)

A composition of matter having a Rockwell A hardness of at least 85 is formed from a precursor mixture comprising between 3 and 10 wt % boron carbide and the remainder a metal mixture comprising from 70 to 90% tungsten or molybdenum, with the remainder of the metal mixture comprising nickel and iron or a mixture thereof. The composition has a relatively low density of between 7 and 14 g/cc. The precursor is preferably hot pressed to yield a composition having greater than 100% of theoretical density.

Sheinberg, H.

1983-07-26T23:59:59.000Z

127

Hard metal composition  

DOE Patents (OSTI)

A composition of matter having a Rockwell A hardness of at least 85 is formed from a precursor mixture comprising between 3 and 10 weight percent boron carbide and the remainder a metal mixture comprising from 70 to 90 percent tungsten or molybdenum, with the remainder of the metal mixture comprising nickel and iron or a mixture thereof. The composition has a relatively low density of between 7 to 14 g/cc. The precursor is preferably hot pressed to yield a composition having greater than 100% of theoretical density.

Sheinberg, Haskell (Los Alamos, NM)

1986-01-01T23:59:59.000Z

128

Catalysis Without Precious Metals  

SciTech Connect

Written for chemists in industry and academia, this ready reference and handbook summarizes recent progress in the development of new catalysts that do not require precious metals. The research thus presented points the way to how new catalysts may ultimately supplant the use of precious metals in some types of reactions, while highlighting the remaining challenges. This material is based upon work supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences.

Bullock, R. Morris

2010-11-01T23:59:59.000Z

129

Metal alloy identifier  

DOE Patents (OSTI)

To identify the composition of a metal alloy, sparks generated from the alloy are optically observed and spectrographically analyzed. The spectrographic data, in the form of a full-spectrum plot of intensity versus wavelength, provide the "signature" of the metal alloy. This signature can be compared with similar plots for alloys of known composition to establish the unknown composition by a positive match with a known alloy. An alternative method is to form intensity ratios for pairs of predetermined wavelengths within the observed spectrum and to then compare the values of such ratios with similar values for known alloy compositions, thereby to positively identify the unknown alloy composition.

Riley, William D. (Avondale, MD); Brown, Jr., Robert D. (Avondale, MD)

1987-01-01T23:59:59.000Z

130

Wick for metal vapor laser  

DOE Patents (OSTI)

An improved wick for a metal vapor laser is made of a refractory metal cylinder, preferably molybdenum or tungsten for a copper laser, which provides the wicking surface. Alternately, the inside surface of the ceramic laser tube can be metalized to form the wicking surface. Capillary action is enhanced by using wire screen, porous foam metal, or grooved surfaces. Graphite or carbon, in the form of chunks, strips, fibers or particles, is placed on the inside surface of the wick to reduce water, reduce metal oxides and form metal carbides.

Duncan, David B. (Livermore, CA)

1992-01-01T23:59:59.000Z

131

Advanced High-Strength Steel Stamping  

Energy.gov (U.S. Department of Energy (DOE))

2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

132

Official Use Only Stamp with Directions  

Energy.gov (U.S. Department of Energy (DOE))

The front marking is placed on the front page of unclassified documents that contain Official Use Only information. The document below contains a sample that may be copied and pasted to your...

133

Thermal conductance of metal-metal interfaces  

Science Journals Connector (OSTI)

The thermal conductance of interfaces between Al and Cu is measured in the temperature range 78metal-dielectric interfaces. The magnitude and the linear temperature dependence of the conductance are described well by a diffuse-mismatch model for electron transport at interfaces.

Bryan C. Gundrum; David G. Cahill; Robert S. Averback

2005-12-30T23:59:59.000Z

134

Moving to Metal  

Science Journals Connector (OSTI)

It is possible to 3D print in metal starting with a powder that...sintered...) by a laser or glued with a binder. As of this writing, this remains a very expensive process, and these are not desktop consumer prin...

Joan Horvath

2014-01-01T23:59:59.000Z

135

Mathematics in metal  

Science Journals Connector (OSTI)

...sculptures begin as a piece of computer code that dictates how the metal-printed parts fit together. She’s been using 3D printing for 15 years to forge her work and says the recent surge in popularity of the technology has opened up a few new opportunities...

Stephen Ornes

2013-01-01T23:59:59.000Z

136

Serpentine metal gasket  

DOE Patents (OSTI)

A metallic seal or gasket for use in the joining of cryogenic fluid conduits, the seal or gasket having a generally planar and serpentine periphery defining a central aperture. According to a preferred embodiment, the periphery has at least two opposing elongated serpentine sides and two opposing arcuate ends joining the opposing elongated serpentine sides and is of a hexagonal cross-section.

Rothgeb, Timothy Moore (Norfolk, VA); Reece, Charles Edwin (Yorktown, VA)

2009-06-02T23:59:59.000Z

137

Metal stocks and sustainability  

Science Journals Connector (OSTI)

...1–4). Unlike oil, which is irremediably...relative scarcity (or price) of the material substituted...interior wiring; plumbing, heating, and architectural uses; and...defined in terms of current prices and costs of production; this...cost-effective at current metal prices. Because the real price of copper has remained...

R. B. Gordon; M. Bertram; T. E. Graedel

2006-01-01T23:59:59.000Z

138

Pile on the metal  

Science Journals Connector (OSTI)

Discovering superconductivity above room temperature is a dream for modern science and technology. Now, theorists propose that for certain types of superconductors, contact with a metal layer could greatly increase the transition temperatures of these materials—in some cases by as much as an order of magnitude.

Dung-Hai Lee

2008-09-15T23:59:59.000Z

139

Photomagnetism of metals  

Science Journals Connector (OSTI)

A photoinduced magnetic moment has been observed in Cu and Al samples exposed to unpolarized visible light at low temperatures. It is shown that the light refected from a metal surface transfers some of its quasimomentum to conduction electrons. This mechanism creates surface currents which, for an appropriate geometry, bring about the photomagnetic effect.

V. L. Gurevich; R. Laiho; A. V. Lashkul

1992-07-06T23:59:59.000Z

140

Lithium Metal Anodes for Rechargeable Batteries. | EMSL  

NLE Websites -- All DOE Office Websites (Extended Search)

Metal Anodes for Rechargeable Batteries. Lithium Metal Anodes for Rechargeable Batteries. Abstract: Rechargeable lithium metal batteries have much higher energy density than those...

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Extensive Interstitial Solid Solutions of Metals in Metals  

Science Journals Connector (OSTI)

A new type of metallic solid solution has been prepared in which <~12.5 at.% of comparatively small metal atoms (Cu) fill interstitial sites in a host metal composed of larger atoms (Y). At higher solute concentrations, both interstitial and substitutional sites are occupied. These solid solutions are metastable; they were formed by ultrarapid quenching from the liquid.

B. C. Giessen; R. Ray; S. H. Hahn

1971-03-01T23:59:59.000Z

142

Purification of alkali metal nitrates  

DOE Patents (OSTI)

A process is disclosed for removing heavy metal contaminants from impure alkali metal nitrates containing them. The process comprises mixing the impure nitrates with sufficient water to form a concentrated aqueous solution of the impure nitrates, adjusting the pH of the resulting solution to within the range of between about 2 and about 7, adding sufficient reducing agent to react with heavy metal contaminants within said solution, adjusting the pH of the solution containing reducing agent to effect precipitation of heavy metal impurities and separating the solid impurities from the resulting purified aqueous solution of alkali metal nitrates. The resulting purified solution of alkali metal nitrates may be heated to evaporate water therefrom to produce purified molten alkali metal nitrate suitable for use as a heat transfer medium. If desired, the purified molten form may be granulated and cooled to form discrete solid particles of alkali metal nitrates.

Fiorucci, Louis C. (Hamden, CT); Gregory, Kevin M. (Woodridge, IL)

1985-05-14T23:59:59.000Z

143

Metal Aminoboranes - Energy Innovation Portal  

NLE Websites -- All DOE Office Websites (Extended Search)

of the formula M(NH.sub.2BH.sub.3).sub.n have been synthesized. Metal aminoboranes are hydrogen storage materials. Metal aminoboranes are also precursors for synthesizing other...

144

Metal-Ion-Mediated Reactions  

NLE Websites -- All DOE Office Websites (Extended Search)

Metal-Ion-Mediated Reactions Metal-Ion-Mediated Reactions Metal-Ion-Mediated Reactions Print Monday, 19 December 2011 18:29 While mononuclear, polynuclear, and polymeric metal complexes are most often synthesized by the reaction of a metal precursor and a presynthesized organic ligand, it is also possible to generate the ligand in situ from an easily available organic compound. This approach allows the reactivity of the metal ion to activate a proligand, transforming it through an in situ reaction, sometimes providing coordination compounds with ligands not accessible by conventional organic synthesis. The intense interest in the reactivity of coordinated ligands is mainly due to the necessity of interpreting the mechanisms of homogeneous metal-catalyzed processes, in which a substrate is activated upon its coordination to one or more metal sites. A coordinated oxime group contains three active sites (C, N, O) for reactivity.

145

Upgrading platform using alkali metals  

DOE Patents (OSTI)

A process for removing sulfur, nitrogen or metals from an oil feedstock (such as heavy oil, bitumen, shale oil, etc.) The method involves reacting the oil feedstock with an alkali metal and a radical capping substance. The alkali metal reacts with the metal, sulfur or nitrogen content to form one or more inorganic products and the radical capping substance reacts with the carbon and hydrogen content to form a hydrocarbon phase. The inorganic products may then be separated out from the hydrocarbon phase.

Gordon, John Howard

2014-09-09T23:59:59.000Z

146

Inert electrode containing metal oxides, copper and noble metal  

DOE Patents (OSTI)

A cermet composite material is made by treating at an elevated temperature a mixture comprising a compound of iron and a compound of at least one other metal, together with an alloy or mixture of copper and a noble metal. The alloy or mixture preferably comprises particles having an interior portion containing more copper than noble metal and an exterior portion containing more noble metal than copper. The noble metal is preferably silver. The cermet composite material preferably includes alloy phase portions and a ceramic phase portion. At least part of the ceramic phase portion preferably has a spinel structure.

Ray, Siba P. (Murrysville, PA); Woods, Robert W. (New Kensington, PA); Dawless, Robert K. (Monroeville, PA); Hosler, Robert B. (Sarver, PA)

2001-01-01T23:59:59.000Z

147

Inert electrode containing metal oxides, copper and noble metal  

DOE Patents (OSTI)

A cermet composite material is made by treating at an elevated temperature a mixture comprising a compound of iron and a compound of at least one other metal, together with an alloy or mixture of copper and a noble metal. The alloy or mixture preferably comprises particles having an interior portion containing more copper than noble metal and an exterior portion containing more noble metal than copper. The noble metal is preferably silver. The cermet composite material preferably includes alloy phase portions and a ceramic phase portion. At least part of the ceramic phase portion preferably has a spinel structure.

Ray, Siba P. (Murrysville, PA); Woods, Robert W. (New Kensington, PA); Dawless, Robert K. (Monroeville, PA); Hosler, Robert B. (Sarver, PA)

2000-01-01T23:59:59.000Z

148

Integrated decontamination process for metals  

DOE Patents (OSTI)

An integrated process for decontamination of metals, particularly metals that are used in the nuclear energy industry contaminated with radioactive material. The process combines the processes of electrorefining and melt refining to purify metals that can be decontaminated using either electrorefining or melt refining processes.

Snyder, Thomas S. (Oakmont, PA); Whitlow, Graham A. (Murrysville, PA)

1991-01-01T23:59:59.000Z

149

Metal-binding polymesr as chelating agents  

E-Print Network (OSTI)

Abstract Metal chelating polymers are functional polymers that bear specified chemical groups capable of selectively binding metals. Heavy metal contamination is considered a serious problem because these metals, even at ...

Mohammadi, Zahra

2011-04-11T23:59:59.000Z

150

Observation of Metal-insulator and Metal-Metal Transitions in Hydrogen Iodide under Pressure  

Science Journals Connector (OSTI)

Hydrogen iodide has been studied up to pressures of 70 GPa at low temperatures in a diamondanvil cell. Electrical-conductivity and optical measurements have been used to observe pressure-induced phase transitions which are interpreted as follows: First a metal-insulator transition takes place in the molecular solid; with increased pressure a metal-metal molecular-to-atomic transition occurs. An additional transition due to intrinsic impurities has been observed. Implications for metallic hydrogen are discussed.

J. van Straaten and Isaac F. Silvera

1986-08-11T23:59:59.000Z

151

FLUIDIC: Metal Air Recharged  

SciTech Connect

Fluidic, with the help of ARPA-E funding, has developed and deployed the world's first proven high cycle life metal air battery. Metal air technology, often used in smaller scale devices like hearing aids, has the lowest cost per electron of any rechargeable battery storage in existence. Deploying these batteries for grid reliability is competitive with pumped hydro installations while having the advantages of a small footprint. Fluidic's battery technology allows utilities and other end users to store intermittent energy generated from solar and wind, as well as maintain reliable electrical delivery during power outages. The batteries are manufactured in the US and currently deployed to customers in emerging markets for cell tower reliability. As they continue to add customers, they've gained experience and real world data that will soon be leveraged for US grid reliability.

Friesen, Cody

2014-03-07T23:59:59.000Z

152

FLUIDIC: Metal Air Recharged  

ScienceCinema (OSTI)

Fluidic, with the help of ARPA-E funding, has developed and deployed the world's first proven high cycle life metal air battery. Metal air technology, often used in smaller scale devices like hearing aids, has the lowest cost per electron of any rechargeable battery storage in existence. Deploying these batteries for grid reliability is competitive with pumped hydro installations while having the advantages of a small footprint. Fluidic's battery technology allows utilities and other end users to store intermittent energy generated from solar and wind, as well as maintain reliable electrical delivery during power outages. The batteries are manufactured in the US and currently deployed to customers in emerging markets for cell tower reliability. As they continue to add customers, they've gained experience and real world data that will soon be leveraged for US grid reliability.

Friesen, Cody

2014-04-02T23:59:59.000Z

153

Apoferritin Templated Synthesis of Metal Phosphate Nanoparticle...  

NLE Websites -- All DOE Office Websites (Extended Search)

Apoferritin Templated Synthesis of Metal Phosphate Nanoparticle Labels for Electrochemical Immunoassay. Apoferritin Templated Synthesis of Metal Phosphate Nanoparticle Labels for...

154

THE COORDINATION CHEMISTRY OF METAL SURFACES  

E-Print Network (OSTI)

result 7 ' 30 u 31 in metal carbide cluster chemistry willin metal chemistry. Oxidation of the iron carbide cluster

Muetterties, Earl L.

2013-01-01T23:59:59.000Z

155

Hydrothermal alkali metal recovery process  

DOE Patents (OSTI)

In a coal gasification operation or similar conversion process carried out in the presence of an alkali metal-containing catalyst wherein solid particles containing alkali metal residues are produced, alkali metal constituents are recovered from the particles by treating them with a calcium or magnesium-containing compound in the presence of water at a temperature between about 250.degree. F. and about 700.degree. F. and in the presence of an added base to establish a pH during the treatment step that is higher than would otherwise be possible without the addition of the base. During the treating process the relatively high pH facilitates the conversion of water-insoluble alkali metal compounds in the alkali metal residues into water-soluble alkali metal constituents. The resultant aqueous solution containing water-soluble alkali metal constituents is then separated from the residue solids, which consist of the treated particles and any insoluble materials formed during the treatment step, and recycled to the gasification process where the alkali metal constituents serve as at least a portion of the alkali metal constituents which comprise the alkali metal-containing catalyst. Preferably, the base that is added during the treatment step is an alkali metal hydroxide obtained by water washing the residue solids produced during the treatment step.

Wolfs, Denise Y. (Houston, TX); Clavenna, Le Roy R. (Baytown, TX); Eakman, James M. (Houston, TX); Kalina, Theodore (Morris Plains, NJ)

1980-01-01T23:59:59.000Z

156

Coated metal fiber coalescing cell  

SciTech Connect

A cell is described for coalescing oil droplets dispersed in a water emulsion including an elongated perforated tube core into which the emulsion is injected, layers of oleophilic plastic covered metal mat wound about the core through which the emulsion is forced to pass, the fibers of the metal mat being covered by oleophilic plastic such as vinyl, acrylic, polypropylene, polyethylene, polyvinyl chloride, the metal being in the form of layers of expanded metal or metal fibers, either aluminum or stainless steel. In manufacturing the cell a helix wound wire is formed around the cylindrical plastic coated metal to retain it in place and resist pressure drop of fluid flowing through the metal fibers. In addition, the preferred arrangement includes the use of an outer sleeve formed of a mat of fibrous material such as polyester fibers, acrylic fibers, modacrylic fibers and mixtures thereof.

Rutz, W.D.; Swain, R.J.

1980-12-23T23:59:59.000Z

157

Water supply and sludge metals  

SciTech Connect

Ultimate sludge disposal is one of the major tasks facing wastewater treatment facilities today. Where adequate farmland exists in proximity to the treatment facility and where sludge characteristics are suitable, land application is often the most economical method. In some cases, however, metal concentrations in the sludge either limit the site life or the application rate to the point where land application is not economical. When metals are above regulatory limits, land application may become impossible. The origin of the metals has largely been credited to industrial users and stormwater runoff and have, in fact, often represented significant sources of metals. Another potentially significant source of metals that has been frequently overlooked is the water supply system (including the distribution and home piping systems). Data from some treatment facilities suggest that the water supply system is the major source of metals and is the reason that sewage sludge metal levels are above allowable land application limits.

Brown, W.E. (Wright-Pierce Engineers, Topsham, ME (USA))

1988-04-01T23:59:59.000Z

158

Corrosion protective coating for metallic materials  

DOE Patents (OSTI)

Corrosion protective coatings for metallic materials, particularly aluminum and aluminum alloys, produced with simple, low-cost equipment and materials other than toxic metals or metal salts, or metal cyanides. The metallic material is cleaned, degreased, and deoxidized, the surface is converted to a substantially alkaline condition, and the surface is chemically sealed with inorganic metal compounds.

Buchheit, Rudolph G. (Albuquerque, NM); Martinez, Michael A. (Albuquerque, NM)

1998-01-01T23:59:59.000Z

159

Corrosion protective coating for metallic materials  

DOE Patents (OSTI)

Corrosion protective coatings for metallic materials, particularly aluminum and aluminum alloys, produced with simple, low-cost equipment and materials other than toxic metals or metal salts, or metal cyanides is disclosed. The metallic material is cleaned, degreased, and deoxidized, the surface is converted to a substantially alkaline condition, and the surface is chemically sealed with inorganic metal compounds. 1 fig.

Buchheit, R.G.; Martinez, M.A.

1998-05-26T23:59:59.000Z

160

ITP Metal Casting: Implementation of Metal Casting Best Practices  

Energy.gov (U.S. Department of Energy (DOE))

The project examined cases where metal casters had implemented ITP research results and detailed the benefits they received due to that implementation.

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

International Recycling of LLW Metals  

SciTech Connect

Melting of radioactive scrap metal has been successfully practiced for more than 15 years, with approximately 60,000 tons of steel being processed into beneficial reuse applications. This process has converted radioactive scrap metal at a licensed facility into useful products such as shield blocks, security barriers and shield containers. These products are used within the nuclear industry, such as nuclear power plants, waste disposal facilities and high-energy physics research facilities. Recycling provides the following benefits by comparison with direct disposal: - Preserving metal resources. - Conserving valuable Low Level Waste (LLW) disposal site resources, thereby extending disposal site life. - Reducing the cost of metal products to end users by using materials less expensive than virgin metals. This paper outlines international metal recycling practices implemented at EnergySolutions' Bear Creek Facility in Oak Ridge, Tennessee. (authors)

Eshleman, T.; Jansen, J. [EnergySolutions (United States); Shinya, Sawada [KEK - High Energy Accelerator Research Organization (Japan)

2008-07-01T23:59:59.000Z

162

Metal to ceramic sealed joint  

DOE Patents (OSTI)

A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system.

Lasecki, John V. (Livonia, MI); Novak, Robert F. (Farmington Hills, MI); McBride, James R. (Ypsilanti, MI)

1991-01-01T23:59:59.000Z

163

Metal to ceramic sealed joint  

DOE Patents (OSTI)

A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system. 11 figures.

Lasecki, J.V.; Novak, R.F.; McBride, J.R.

1991-08-27T23:59:59.000Z

164

ITP Metal Casting: A Vision for the U.S. Metal Casting Industry...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

mcvision.pdf More Documents & Publications ITP Metal Casting: Metalcasting Industry Technology Roadmap ITP Metal Casting: Implementation of Metal Casting Best Practices ITP...

165

Metal-ceramic joint assembly  

DOE Patents (OSTI)

A metal-ceramic joint assembly in which a brazing alloy is situated between metallic and ceramic members. The metallic member is either an aluminum-containing stainless steel, a high chromium-content ferritic stainless steel or an iron nickel alloy with a corrosion protection coating. The brazing alloy, in turn, is either an Au-based or Ni-based alloy with a brazing temperature in the range of 9500 to 1200.degree. C.

Li, Jian (New Milford, CT)

2002-01-01T23:59:59.000Z

166

Method for preparing porous metal hydride compacts  

DOE Patents (OSTI)

A method for preparing porous metallic-matrix hydride compacts which can be repeatedly hydrided and dehydrided without disintegration. A mixture of a finely divided metal hydride and a finely divided matrix metal is contacted with a poison which prevents the metal hydride from dehydriding at room temperature and atmospheric pressure. The mixture of matrix metal and poisoned metal hydride is then compacted under pressure at room temperature to form porous metallic-matrix hydride compacts.

Ron, M.; Gruen, D.M.; Mendelsohn, M.H.; Sheft, I.

1980-01-21T23:59:59.000Z

167

Clean Metal Casting  

SciTech Connect

The objective of this project is to develop a technology for clean metal processing that is capable of consistently providing a metal cleanliness level that is fit for a given application. The program has five tasks: Development of melt cleanliness assessment technology, development of melt contamination avoidance technology, development of high temperature phase separation technology, establishment of a correlation between the level of melt cleanliness and as cast mechanical properties, and transfer of technology to the industrial sector. Within the context of the first task, WPI has developed a standardized Reduced Pressure Test that has been endorsed by AFS as a recommended practice. In addition, within the context of task1, WPI has developed a melt cleanliness sensor based on the principles of electromagnetic separation. An industrial partner is commercializing the sensor. Within the context of the second task, WPI has developed environmentally friendly fluxes that do not contain fluorine. Within the context of the third task, WPI modeled the process of rotary degassing and verified the model predictions with experimental data. This model may be used to optimize the performance of industrial rotary degassers. Within the context of the fourth task, WPI has correlated the level of melt cleanliness at various foundries, including a sand casting foundry, a permanent mold casting foundry, and a die casting foundry, to the casting process and the resultant mechanical properties. This is useful in tailoring the melt cleansing operations at foundries to the particular casting process and the desired properties of cast components.

Makhlouf M. Makhlouf; Diran Apelian

2002-02-05T23:59:59.000Z

168

``Towards Strange Metallic Holography'  

SciTech Connect

We initiate a holographic model building approach to 'strange metallic' phenomenology. Our model couples a neutral Lifshitz-invariant quantum critical theory, dual to a bulk gravitational background, to a finite density of gapped probe charge carriers, dually described by D-branes. In the physical regime of temperature much lower than the charge density and gap, we exhibit anomalous scalings of the temperature and frequency dependent conductivity. Choosing the dynamical critical exponent z appropriately we can match the non-Fermi liquid scalings, such as linear resistivity, observed in strange metal regimes. As part of our investigation we outline three distinct string theory realizations of Lifshitz geometries: from F theory, from polarized branes, and from a gravitating charged Fermi gas. We also identify general features of renormalization group flow in Lifshitz theories, such as the appearance of relevant charge-charge interactions when z {ge} 2. We outline a program to extend this model building approach to other anomalous observables of interest such as the Hall conductivity.

Hartnoll, Sean A.; /Harvard U., Phys. Dept. /Santa Barbara, KITP /UC, Santa Barbara; Polchinski, Joseph; Silverstein, Eva; /Santa Barbara, KITP /UC, Santa Barbara; Tong, David; /Cambridge U., DAMTP /Santa Barbara, KITP /UC, Santa Barbara

2010-08-26T23:59:59.000Z

169

Metal deposition using seed layers  

DOE Patents (OSTI)

Methods of forming a conductive metal layers on substrates are disclosed which employ a seed layer to enhance bonding, especially to smooth, low-roughness or hydrophobic substrates. In one aspect of the invention, the seed layer can be formed by applying nanoparticles onto a surface of the substrate; and the metallization is achieved by electroplating an electrically conducting metal onto the seed layer, whereby the nanoparticles serve as nucleation sites for metal deposition. In another approach, the seed layer can be formed by a self-assembling linker material, such as a sulfur-containing silane material.

Feng, Hsein-Ping; Chen, Gang; Bo, Yu; Ren, Zhifeng; Chen, Shuo; Poudel, Bed

2013-11-12T23:59:59.000Z

170

Metal-Insulator Transition in Metal—Rare-Gas Alloys  

Science Journals Connector (OSTI)

We present the results of electrical resistivity and optical absorption measurements for compositions spanning the metal-insulator transition in RbKr and CsXe alloys. The two transitions are similar and exhibit an apparently percolative character. No marked emergence of excitons accompanies the disappearance of conductivity. Spectral features associated with metallic conduction also persist through the transitions.

D. J. Phelps; R. Avci; C. P. Flynn

1975-01-06T23:59:59.000Z

171

Nonequilibrium electron tunneling in metal-insulator-metal junctions  

Science Journals Connector (OSTI)

The small structure in the conductance curve near zero bias of metal-insulator-metal tunnel junctions has been studied extensively. These experiments are analyzed in detail in a nonequilibrium model. It is shown that this type of zero-bias anomaly can be accounted for entirely by an electron bottleneck arising from the blocking of tunneling states due to nonzero electron relaxation times.

J. G. Adler; H. J. Kreuzer; J. Straus

1975-04-15T23:59:59.000Z

172

Theory of bonding of transition metals to nontransition metals  

Science Journals Connector (OSTI)

We present a theory of the chemical bond in compounds consisting of both transition metals and nontransition metals. Chemical trends in the bonding properties are established by directly comparing the total energies of a large number of such compounds with the total energies of their constituents. These chemical trends are analyzed in terms of the s-, p-, and d-like state densities of the compounds and the constituents. Rather different types of bonding are shown to result when the atomic s and p levels of the nontransition metal lie above, below, and near the energy of the transition-metal d level. The heat of compound formation is shown to result from a competition between two simple physical effects: (1) the weakening of the transition-metal bonds by the lattice dilatation required for the accommodation of the nontransition metal, and (2) the increased bonding which results from the occupation of the bonding members of the hybrid states formed from the interaction between the transition-metal d states and the s-p states on the nontransition metal. Our theoretical values for the heats of formation of these compounds are generally similar to those given by Miedema's empirical formula. Distinctive aspects of the variation of the heat of formation with the number of valence electrons reveal, however, that the microscopic picture on which the empirical formula is based is quite different from that given by our self-consistent energy-band theory.

C. D. Gelatt; Jr.; A. R. Williams; V. L. Moruzzi

1983-02-15T23:59:59.000Z

173

Catalytic production of metal carbonyls from metal oxides  

DOE Patents (OSTI)

This invention relates to the formation of metal carbonyls from metal oxides and specially the formation of molybdenum carbonyl and iron carbonyl from their respective oxides. Copper is used here in admixed form or used in chemically combined form as copper molybdate. The copper/metal oxide combination or combined copper is utilized with a solvent, such as toluene and subjected to carbon monoxide pressure of 25 atmospheres or greater at about 150 to 260/sup 0/C. The reducing metal copper is employed in catalytic concentrations or combined concentrations as CuMoO/sub 4/ and both hydrogen and water present serve as promoters. It has been found that the yields by this process have been salutary and that additionally the catalytic metal may be reused in the process to good effect. 3 tables.

Sapienza, R.S.; Slegeir, W.A.; Foran, M.T.

1984-01-06T23:59:59.000Z

174

Creating bulk nanocrystalline metal.  

SciTech Connect

Nanocrystalline and nanostructured materials offer unique microstructure-dependent properties that are superior to coarse-grained materials. These materials have been shown to have very high hardness, strength, and wear resistance. However, most current methods of producing nanostructured materials in weapons-relevant materials create powdered metal that must be consolidated into bulk form to be useful. Conventional consolidation methods are not appropriate due to the need to maintain the nanocrystalline structure. This research investigated new ways of creating nanocrystalline material, new methods of consolidating nanocrystalline material, and an analysis of these different methods of creation and consolidation to evaluate their applicability to mesoscale weapons applications where part features are often under 100 {micro}m wide and the material's microstructure must be very small to give homogeneous properties across the feature.

Fredenburg, D. Anthony (Georgia Institute of Technology, Atlanta, GA); Saldana, Christopher J. (Purdue University, West Lafayette, IN); Gill, David D.; Hall, Aaron Christopher; Roemer, Timothy John (Ktech Corporation, Albuquerque, NM); Vogler, Tracy John; Yang, Pin

2008-10-01T23:59:59.000Z

175

Metal recovery from porous materials  

DOE Patents (OSTI)

The present invention relates to recovery of metals. More specifically, the present invention relates to the recovery of plutonium and other metals from porous materials using microwaves. The United States Government has rights in this invention pursuant to Contract No. DE-AC09-89SR18035 between the US Department of Energy and Westinghouse Savannah River Company.

Sturcken, E.F.

1991-01-01T23:59:59.000Z

176

PHYSICAL PROPERTIES OF METALS1  

Science Journals Connector (OSTI)

... the application of pressing and shaping force is afforded by the processes in use for "teapot spinning,"i.e. the production of a Britannia-metal ... spinning,"i.e. the production of a Britannia-metal teapot by a process technically termed spinning. The alloy being rolled into sheets of convenient ...

1878-05-16T23:59:59.000Z

177

Formation of zirconium metallic glass  

Science Journals Connector (OSTI)

... Bulk metallic glasses are commonly produced by the rapid cooling of liquid alloys. They have emerged over ... a novel class of materials, with attractive properties and technological promise. The bulk metallic glasses so far produced contain three or more component elements. These complex compositions are necessary ...

Jianzhong Zhang; Yusheng Zhao

2004-07-15T23:59:59.000Z

178

Metal binding in an aluminum based metal-organic framework for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Metal binding in an aluminum based metal-organic framework for carbon dioxide capture Link to article...

179

Durability of metals from archaeological objects, metal meteorites, and native metals  

SciTech Connect

Metal durability is an important consideration in the multi-barrier nuclear waste storage concept. This study summarizes the ancient metals, the environments, and factors which appear to have contributed to metal longevity. Archaeological and radiochemical dating suggest that human use of metals began in the period 6000 to 7000 BC. Gold is clearly the most durable, but many objects fashioned from silver, copper, bronze, iron, lead, and tin have survived for several thousand years. Dry environments, such as tombs, appear to be optimum for metal preservation, but some metals have survived in shipwrecks for over a thousand years. The metal meteorites are Fe-base alloys with 5 to 60 wt% Ni and minor amounts of Co, I, and S. Some meteoritic masses with ages estimated to be 5,000 to 20,000 years have weathered very little, while other masses from the same meteorites are in advanced stages of weathering. Native metals are natural metallic ores. Approximately five million tonnes were mined from native copper deposits in Michigan. Copper masses from the Michigan deposits were transported by the Pleistocene glaciers. Areas on the copper surfaces which appear to represent glacial abrasion show minimal corrosion. Dry cooling tower technology has demonstrated that in pollution-free moist environments, metals fare better at temperatures above than below the dewpoint. Thus, in moderate temperature regimes, elevated temperatures may be useful rather than detrimental for exposures of metal to air. In liquid environments, relatively complex radiolysis reactions can occur, particularly where multiple species are present. A dry environment largely obviates radiolysis effects.

Johnson, A.B. Jr.; Francis, B.

1980-01-01T23:59:59.000Z

180

Method for preparing metal powder, device for preparing metal powder, method for processing spent nuclear fuel  

DOE Patents (OSTI)

A method for producing metal powder is provided the comprising supplying a molten bath containing a reducing agent, contacting a metal oxide with the molten bath for a time and at a temperature sufficient to reduce the metal in the metal oxide to elemental metal and produce free oxygen; and isolating the elemental metal from the molten bath.

Park, Jong-Hee (Clarendon Hills, IL)

2011-11-29T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Microbial controls on metal ion mobility  

E-Print Network (OSTI)

In this dissertation, the biogeochemical controls on metal mobility in the subsurface are examined; specifically, the release of metals from buried mineralization, the transport of metals through overburden, and the ...

Leslie, Karla Louise

2012-12-31T23:59:59.000Z

182

Metal-directed protein self-assembly  

E-Print Network (OSTI)

Metal-Directed Protein Self- Assembly. Acc. Chem. Res. 43,Metal-directed protein self-assembly. Acc. Chem. Res. 43,Metal- mediated self-assembly of protein superstructures:

Salgado. Eric N.

2010-01-01T23:59:59.000Z

183

Bad Metals Made with Good-Metal Components  

Science Journals Connector (OSTI)

We have grown thin stable films of a good metal, Ag, that have characteristics of bad metals: high resistivity, strong temperature dependence of resistivity, and lack of resistive saturation. For films of different thickness, the temperature-dependent resistance and the Hall effect resistance provide evidence that the apparent bad metallicity is a consequence of the microstructure of the film rather than the result of new physics. This microstructure, which we characterize with scanning probe techniques, occurs on length scales comparable to the mean free path, thereby changing the sign of the classical magnetoresistance from positive to negative.

S. B. Arnason; S. P. Herschfield; A. F. Hebard

1998-11-02T23:59:59.000Z

184

Metal-based reactive nanomaterials  

Science Journals Connector (OSTI)

Recent developments in materials processing and characterization resulted in the discovery of a new type of reactive materials containing nanoscaled metal components. The well-known high oxidation energies of metallic fuels can now be released very rapidly because of the very high reactive interface areas in such metal-based reactive nanomaterials. Consequently, these materials are currently being examined for an entire range of applications in energetic formulations inappropriate for conventional, micron-sized metal fuels having relatively low reaction rates. New application areas, such as reactive structural materials, are also being explored. Research remains active in manufacturing and characterization of metal-based reactive nanomaterials including elemental metal nanopowders and various nanocomposite material systems. Because of the nanometer scale of the individual particles, or phase domains, and because of the very high enthalpy of reaction between components of the nanocomposite materials, the final phase compositions, morphology, and thermodynamic properties of the reactive nanocomposite materials may be different from those of their micron-scaled counterparts. Ignition mechanisms in such materials can be governed by heterogeneous reactions that are insignificant for materials with less developed reactive interface areas. New combustion regimes are being observed that are affected by very short ignition delays combined with very high metal combustion temperatures. Current progress in this rapidly growing research area is reviewed and some potential directions for the future research are discussed.

Edward L. Dreizin

2009-01-01T23:59:59.000Z

185

Metal-doped organic foam  

DOE Patents (OSTI)

Organic foams having a low density and very small cell size and method for producing same in either a metal-loaded or unloaded (nonmetal loaded) form are described. Metal-doped foams are produced by soaking a polymer gel in an aqueous solution of desired metal salt, soaking the gel successively in a solvent series of decreasing polarity to remove water from the gel and replace it with a solvent of lower polarity with each successive solvent in the series being miscible with the solvents on each side and being saturated with the desired metal salt, and removing the last of the solvents from the gel to produce the desired metal-doped foam having desired density cell size, and metal loading. The unloaded or metal-doped foams can be utilized in a variety of applications requiring low density, small cell size foam. For example, rubidium-doped foam made in accordance with the invention has utility in special applications, such as in x-ray lasers.

Rinde, James A. (Livermore, CA)

1982-01-01T23:59:59.000Z

186

Metal Hydride Hydrogen Storage R and D  

Energy.gov (U.S. Department of Energy (DOE))

DOE's research on complex metal hydrides targets the development of advanced metal hydride materials including light-weight complex hydrides, destabilized binary hydrides, intermetallic hydrides,...

187

Metal-Organic Heat Carrier Nanofluids. | EMSL  

NLE Websites -- All DOE Office Websites (Extended Search)

Organic Heat Carrier Nanofluids. Metal-Organic Heat Carrier Nanofluids. Abstract: Nanofluids, dispersions of metal or oxide nanoparticles in a base working fluid, are being...

188

Accelerated Cellulose Depolymerization Catalyzed by Paired Metal...  

NLE Websites -- All DOE Office Websites (Extended Search)

Depolymerization Catalyzed by Paired Metal Chlorides in Ionic Liquid Solvent. Accelerated Cellulose Depolymerization Catalyzed by Paired Metal Chlorides in Ionic Liquid...

189

Metal Hydride Hydrogen Storage Research and Development  

Energy.gov (U.S. Department of Energy (DOE))

DOE's research on complex metal hydrides targets the development of advanced metal hydride materials including light-weight complex hydrides, destabilized binary hydrides, intermetallic hydrides,...

190

Metal Roofing Alliance (MRA) | Open Energy Information  

Open Energy Info (EERE)

Metal Roofing Alliance (MRA) Jump to: navigation, search Name: Metal Roofing Alliance (MRA) Place: Belfair, WA Information About Partnership with NREL Partnership with NREL Yes...

191

METAL NANOPARTICLES FUNCTIONALIZED WITH METAL-LIGAND COVALENT BONDS  

E-Print Network (OSTI)

fundamental and technological perspectives, largely because these nanomaterials show unique optical and electronicelectronic energy structures, which may serve as a fundamentaland electronic characteristics, the metal nanoparticles have been attracting extensive interest in the field of fundamental

Kang, Xiongwu

2012-01-01T23:59:59.000Z

192

Nonmetal-metal transition in metal–molten-salt solutions  

Science Journals Connector (OSTI)

The method of ab initio molecular dynamics, based on finite-temperature density-functional theory, is used to study the nonmetal-metal transition in two different metal–molten-salt solutions, Kx(KCl)1-x and Nax(NaBr)1-x. As the excess metal concentration is increased the electronic density becomes delocalized and percolating conducting paths are formed, making a significant dc electrical conductivity possible. This marks the onset of the metallic regime. By calculating several electronic and structural properties, remarkable differences between the two solutions are observed. The anomalous behavior of Nax(NaBr)1-x, typical of all the Na-NaX solutions, is found to be related to the strong attractive interaction between the sodium ions and the excess electrons. © 1996 The American Physical Society.

Pier Luigi Silvestrelli; Ali Alavi; Michele Parrinello; Daan Frenkel

1996-05-15T23:59:59.000Z

193

Magnetism in Transition Metals  

Science Journals Connector (OSTI)

An attempt is made to distinguish "band-type magnetization" from "alignment-type magnetization" on the basis of whether the local moments associated with the Wannier functions on the atom sites are "induced" or "permanent." In general, the local moment is partially induced and partially permanent, and a criterion is suggested: A local moment is defined to be of the permanent variety if in the presence of magnetic forces (supposed characteristic of the crystal in a given circumstance) tending to produce a moment in one sense (z^, say) of a direction, it can maintain itself (perhaps altered in magnitude, however) in the opposite sense (-z^), as well as in z^. The internal mechanisms tending to produce permanent moments are simplified to just the Hcorr of Anderson, and the external inducing mechanism are the Heisenberg interaction and a magnetic field, Hspin, say. If Hcorr dominates Hspin, then it is shown that a local moment can maintain itself to the polarizing tendencies (whence an alignment type of magnetization calculation is appropriate), but if Hspin dominates Hcorr, then the local moment has only one sense possible in this environment (and a band type of calculation is appropriate). It is suggested that this distinction is relevant to transition metals.

M. Bailyn

1965-09-13T23:59:59.000Z

194

Electromagnetic modes in metal-insulator-metal structures  

Science Journals Connector (OSTI)

Metal-dielectric-metal structures are constructed by depositing Ag films on CaF2 thin films that coat Ag surfaces. The reflectance of such structures was measured for several angles of incidence in the 1–5-eV spectral range. The minima observed in the reflectance are due to the excitation of electromagnetic modes inside an optical cavity. These observed electromagnetic modes are discussed and compared to computed dispersion.

F. Villa; T. Lopez-Rios; L. E. Regalado

2001-04-02T23:59:59.000Z

195

Contacts Between Metals and Between a Metal and a Semiconductor  

Science Journals Connector (OSTI)

The problem of contacts between metals and between a metal and a semiconductor is treated classically with the help of the results of wave mechanical theory of electron energy states in solids. The potential and electron density distributions in the two bodies near the contact are discussed. The bodies are assumed to be in immediate contact. The problem of a body in vacuum and the problem of two bodies separated by a gap are discussed qualitatively.

H. Y. Fan

1942-10-01T23:59:59.000Z

196

Safety and core design of large liquid-metal cooled fast breeder reactors  

E-Print Network (OSTI)

Absorption Metal (Zr) Metal (Mo) Carbide Nitride Oxidef /? a k ? Metal (Zr) Metal (Mo) Carbide Nitride Oxide Table? a k ? Metal (Zr) Metal (Mo) Carbide Nitride Oxide CHAPTER

Qvist, Staffan Alexander

2013-01-01T23:59:59.000Z

197

Advances in Metallic Nuclear Fuel  

Science Journals Connector (OSTI)

Metallic nuclear fuels have generated renewed interest for advanced ... operations is excellent. Ongoing irradiation tests in Argonne-West’s Idaho-based Experimental Breeder Reactor ... fast reactor (IFR) concept...

B. R. Seidel; L. C. Walters; Y. I. Chang

1987-04-01T23:59:59.000Z

198

Doping Graphene with Metal Contacts  

Science Journals Connector (OSTI)

Making devices with graphene necessarily involves making contacts with metals. We use density functional theory to study how graphene is doped by adsorption on metal substrates and find that weak bonding on Al, Ag, Cu, Au, and Pt, while preserving its unique electronic structure, can still shift the Fermi level with respect to the conical point by ?0.5??eV. At equilibrium separations, the crossover from p-type to n-type doping occurs for a metal work function of ?5.4??eV, a value much larger than the graphene work function of 4.5 eV. The numerical results for the Fermi level shift in graphene are described very well by a simple analytical model which characterizes the metal solely in terms of its work function, greatly extending their applicability.

G. Giovannetti; P. A. Khomyakov; G. Brocks; V. M. Karpan; J. van den Brink; P. J. Kelly

2008-07-10T23:59:59.000Z

199

Chapter 4 - Recycling Rare Metals  

Science Journals Connector (OSTI)

Abstract The industrial system now utilizes many more elements, especially rare metals, than was the case even a half century ago. Most are not mined for themselves but are obtained as by-products or “hitchhikers” of the more familiar industrial metals, such as iron, aluminum, copper, nickel, and zinc. This imposes a limit on the production of by-product metals. But in some cases, demand may increase much faster than new supply. This suggests a need for recycling. But the uses of these metals are often in products, such as cell phones, that are mass-produced but where the amount in each individual product is very small. Some uses are also inherently dissipative. This makes recycling very difficult in principle. It constitutes a serious challenge for the future economy. Prices will rise.

Robert U. Ayres; Gara Villalba Méndez; Laura Talens Peiró

2014-01-01T23:59:59.000Z

200

Electrical Resistance of Ferromagnetic Metals  

Science Journals Connector (OSTI)

......Physics September 1959 research-article Articles Electrical Resistance of Ferromagnetic Metals Isao Mannari Department of Physics...the Physical Society of Japan 81 (2012) 064715 (8 pages) Electric and Magnetic Properties of bcc Fe Based Multicomponent Alloys......

Isao Mannari

1959-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Selenophene transition metal complexes  

SciTech Connect

This research shows that selenophene transition metal complexes have a chemistry that is similar to their thiophene analogs. Selenophene coordination has been demonstrated and confirmed by molecular structure in both the {eta}{sup 5}- and the {eta}{sup 1}(Se)-coordination modes. The reaction chemistry of selenophene complexes closely resembles that of the analogous thiophene complexes. One major difference, however, is that selenophene is a better donor ligand than thiophene making the selenophene complexes more stable than the corresponding thiophene complexes. The {sup 77}Se NMR chemical shift values for selenophene complexes fall within distinct regions primarily depending on the coordination mode of the selenophene ligand. In the final paper, the C-H bond activation of {eta}{sup 1}(S)-bound thiophenes, {eta}{sup 1}(S)-benzothiophene and {eta}{sup 1}(Se)-bound selenophenes has been demonstrated. The deprotonation and rearrangement of the {eta}{sup 1}(E)-bound ligand to the carbon bound L-yl complex readily occurs in the presence of base. Reprotonation with a strong acid gives a carbene complex that is unreactive towards nucleophilic attack at the carbene carbon and is stable towards exposure to air. The molecular structure of [Cp(NO)(PPh{sub 3})Re(2-benzothioenylcarbene)]O{sub 3}SCF{sub 3} was determined and contains a Re-C bond with substantial double bond character. Methyl substitution for the thienylcarbene or selenylcarbene gives a carbene that rearranges thermally to give back the {eta}{sup 1}(E)-bound complex. Based on these model reactions, a new mechanism for the H/D exchange of thiophene over the hydrodesulfurization catalyst has been proposed.

White, C.J.

1994-07-27T23:59:59.000Z

202

Titanium metal: extraction to application  

SciTech Connect

In 1998, approximately 57,000 tons of titanium metal was consumed in the form of mill products (1). Only about 5% of the 4 million tons of titanium minerals consumed each year is used to produce titanium metal, with the remainder primarily used to produce titanium dioxide pigment. Titanium metal production is primarily based on the direct chlorination of rutile to produce titanium tetrachloride, which is then reduced to metal using the Kroll magnesium reduction process. The use of titanium is tied to its high strength-to-weight ratio and corrosion resistance. Aerospace is the largest application for titanium. In this paper, we discuss all aspects of the titanium industry from ore deposits through extraction to present and future applications. The methods of both primary (mining of ore, extraction, and purification) and secondary (forming and machining) operations will be analyzed. The chemical and physical properties of titanium metal will be briefly examined. Present and future applications for titanium will be discussed. Finally, the economics of titanium metal production also are analyzed as well as the advantages and disadvantages of various alternative extraction methods.

Gambogi, Joseph (USGS, Reston, VA); Gerdemann, Stephen J.

2002-09-01T23:59:59.000Z

203

Complexes of niobium and tantalum containing metal-metal bonds  

SciTech Connect

A new entry into the area of low valent niobium and tantalum complexes containing metal-metal bonds is described. M/sub 2/X/sub 6/ (..mu..-THT)(THF)/sub 2/ complexes, where M = Nb or Ta, X = Cl or Br and THT - tetrahydrothiophene, are conveniently synthesized via the reaction of M/sub 2/M/sub 6/(THT)/sub 3/ with THF (THF = tetrahydrofuran). Unlike M/sub 2/X/sub 6/(THT)/sub 3/, M/sub 2/X/sub 6/(..mu..-THT)(THF)/sub 2/ can be easily reduced by sodium amalgam. In THF and in the presence of THT, complexes of the type M/sub 2/X/sub 6/(..mu..-THT)/sub 3//sup 2 -/ form. Salts of these compounds can also be synthesized directly from the metal pentahalides in a two step, one pot reaction in which M/sub 2/X/sub 6/(THT)/sub 3/ is an intermediate. The M/sub 2/X/sub 6/(..mu..-THT)/sub 3//sup 2 -/ complexes have a face-sharing bioctahedral structure with metal-metal triple bonds, the first reported for niobium or tantalum. These compounds are relatively inert, but (Nb/sub 2/Cl/sub 6/(..mu..-THT)/sub 3//sup 2 -/ does reach with pyridine and with a solution of acetic acid/acetic anhydride. These reactions and those of some of the sodium salts are described. In general, trinuclear complexes of niobium and tantalum are rare, and this type of discrete trinuclear complex, which contains one capping, three bridging and nine terminal ligands, has been seen only once before for the group 5 metals, although many examples of similar group 6 metal complexes are known. Full details of the synthesis and characterization of these complexes are described and an interpretation of their electronic structures is given.

Diebold, M.P.

1987-01-01T23:59:59.000Z

204

Anaerobic microbial remobilization of coprecipitated metals  

DOE Patents (OSTI)

A process is provided for solubilizing coprecipitated metals. Metals in waste streams are concentrated by treatment with an iron oxide coprecipitating agent. The coprecipitated metals are solubilized by contacting the coprecipitate with a bacterial culture of a Clostridium species ATCC 53464. The remobilized metals can then be recovered and recycled. 4 figs.

Francis, A.J.; Dodge, C.J.

1994-10-11T23:59:59.000Z

205

The metal–insulator transition: a perspective  

Science Journals Connector (OSTI)

...transition in condensed phases. Phys. Rev. B...M. J. 1982 The transition to the metallic...metalnon-metal transition in expanded metals...of electrons and ions in condensed matter...The metalnonmetal transition in disordered systems...1996c The changing phase of expanded metals...

1998-01-01T23:59:59.000Z

206

Metal sponge for cryosorption pumping applications  

DOE Patents (OSTI)

A system has been developed for adsorbing gases at high vacuum in a closed area. The system utilizes large surface clean anodized metal surfaces at low temperatures to adsorb the gases. The large surface clean anodized metal is referred to as a metal sponge. The metal sponge generates or maintains the high vacuum by increasing the available active cryosorbing surface area. 4 figs.

Myneni, G.R.; Kneisel, P.

1995-12-26T23:59:59.000Z

207

OXFORD BIBLIOGRAPHIES IN ECOLOGY "HEAVY METAL TOLERANCE"  

E-Print Network (OSTI)

cellular mechanisms affected by heavy metals is Bánfalvi 2011. Pollution by heavy metals is an important environmental problem, and sources that focus on heavy metal pollution often contain information about heavyOXFORD BIBLIOGRAPHIES IN ECOLOGY "HEAVY METAL TOLERANCE" By Nishanta Rajakaruna and Robert S. Boyd

Rajakaruna, Nishanta

208

Metal salt catalysts for enhancing hydrogen spillover  

SciTech Connect

A composition for hydrogen storage includes a receptor, a hydrogen dissociating metal doped on the receptor, and a metal salt doped on the receptor. The hydrogen dissociating metal is configured to spill over hydrogen to the receptor, and the metal salt is configured to increase a rate of the spill over of the hydrogen to the receptor.

Yang, Ralph T; Wang, Yuhe

2013-04-23T23:59:59.000Z

209

Metal sponge for cryosorption pumping applications  

DOE Patents (OSTI)

A system has been developed for adsorbing gases at high vacuum in a closed area. The system utilizes large surface clean anodized metal surfaces at low temperatures to adsorb the gases. The large surface clean anodized metal is referred to as a metal sponge. The metal sponge generates or maintains the high vacuum by increasing the available active cryosorbing surface area.

Myneni, Ganapati R. (Yorktown, VA); Kneisel, Peter (Williamsburg, VA)

1995-01-01T23:59:59.000Z

210

Modal analysis and coupling in metal-insulator-metal waveguides  

Science Journals Connector (OSTI)

This paper shows how to analyze plasmonic metal-insulator-metal waveguides using the full modal structure of these guides. The analysis applies to all frequencies, particularly including the near infrared and visible spectrum, and to a wide range of sizes, including nanometallic structures. We use the approach here specifically to analyze waveguide junctions. We show that the full modal structure of the metal-insulator-metal (MIM) waveguides—which consists of real and complex discrete eigenvalue spectra, as well as the continuous spectrum—forms a complete basis set. We provide the derivation of these modes using the techniques developed for Sturm-Liouville and generalized eigenvalue equations. We demonstrate the need to include all parts of the spectrum to have a complete set of basis vectors to describe scattering within MIM waveguides with the mode-matching technique. We numerically compare the mode-matching formulation with finite-difference frequency-domain analysis and find very good agreement between the two for modal scattering at symmetric MIM waveguide junctions. We touch upon the similarities between the underlying mathematical structure of the MIM waveguide and the PT symmetric quantum-mechanical pseudo-Hermitian Hamiltonians. The rich set of modes that the MIM waveguide supports forms a canonical example against which other more complicated geometries can be compared. Our work here encompasses the microwave results but extends also to waveguides with real metals even at infrared and optical frequencies.

?ükrü Ekin Kocaba?; Georgios Veronis; David A. B. Miller; Shanhui Fan

2009-01-26T23:59:59.000Z

211

Electron Spin Resonance in Metals and Metal-Ammonia Solutions  

Science Journals Connector (OSTI)

Electron spin resonance measurements have been made at 300 Mc/sec on frozen metal ammonia solutions, liquid metal ammonia solutions, and liquid metals. The experiments on frozen solutions have shown that the metal is precipitated out in small particles. Nuclear resonance experiments have corroborated this finding. The frozen solutions are used as a convenient source of small particles, and observations have been made of relaxation times in Na, Li, K, and Cs. Resonances in the liquid ammonia solutions of Li, Na, K, Rb, Cs, and Ca, and also in a solution of Li in methylamine were observed. The data are consistent with the theoretical model of Kraus, Ogg, and Kaplan and Kittel. Bulk metal resonances were observed to temperatures above the melting points on lithium and sodium. The results for sodium corroborate the Elliott theory of relaxation, and the lithium results indicate resistivity-dependent relaxation time. No resonance was observed in bulk K, Rb, and Cs carried to temperatures above their melting points.

R. A. Levy

1956-04-01T23:59:59.000Z

212

Alkali-metal-atom chemisorption onto a metal surface  

Science Journals Connector (OSTI)

Recent theoretical and experimental work implies that an alkali-metal atom chemisorbed onto a metal surface can be viewed within a ‘‘dressed-atom’’ picture, i.e., as an atom whose wave functions are perturbed due to its interaction with the surrounding host lattice. This picture is similar to that used for a noble-gas atom physisorbed onto a metal surface. Such an approach utilizes the calculational method of the coupled–Hartree-Fock theory, and it is applied in the present work to the chemisorption of a potassium atom onto a semi-infinite Na(001) substrate. Results for the Hartree-Fock ground state of the chemisorbed K atom, its induced dipole moment, and induced splitting of its p-orbital states are calculated at various substrate-adatom separations. It has been found that the induced dipole moment exhibits a maximum in its absolute value as the metal-adatom separation changes; most of the contribution to the dipole moment is due to the 3s- and 4s-electron states, while the pz states have been found to be counterpolarized, i.e., they polarize toward the vacuum side. On the other hand, the calculated dipole moments of the adatom were found to be too small to account for the observed work-function changes during alkali-metal chemisorption on a mteal surface.

A. N. Andriotis

1990-11-15T23:59:59.000Z

213

Inert anode containing base metal and noble metal useful for the electrolytic production of aluminum  

DOE Patents (OSTI)

An inert anode for production of metals such as aluminum is disclosed. The inert anode comprises a base metal selected from Cu and Ag, and at least one noble metal selected from Ag, Pd, Pt, Au, Rh, Ru, Ir and Os. The inert anode may optionally be formed of sintered particles having interior portions containing more base metal than noble metal and exterior portions containing more noble metal than base metal. In a preferred embodiment, the base metal comprises Cu, and the noble metal comprises Ag, Pd or a combination thereof.

Ray, Siba P. (Murrysville, PA); Liu, Xinghua (Monroeville, PA)

2000-01-01T23:59:59.000Z

214

CX-011986: Categorical Exclusion Determination | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

tooling required to stamp and assemble sheet metal components, as well as automation tooling to transport parts from station to station, assembly tooling and fixtures,...

215

CX-011987: Categorical Exclusion Determination | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

tooling required to stamp and assemble sheet metal components, as well as automation tooling to transport parts from station to station, assembly tooling and fixtures,...

216

Adhesion, stability, and bonding at metal/metal-carbide interfaces: Al/WC Donald J. Siegel  

E-Print Network (OSTI)

of adhesion between metals and transition metal carbides/nitrides based on Density Functional Theory(DFT)[14Adhesion, stability, and bonding at metal/metal-carbide interfaces: Al/WC Donald J. Siegel the nature of metal/carbide bonding. Based on the surface and interfacial free energies, we find that both

Adams, James B

217

Reversible photodeposition and dissolution of metal ions  

DOE Patents (OSTI)

A cyclic photocatalytic process for treating waste water containing metal and organic contaminants. In one embodiment of the method, metal ions are photoreduced onto the photocatalyst and the metal concentrated by resolubilization in a smaller volume. In another embodiment of the method, contaminant organics are first oxidized, then metal ions removed by photoreductive deposition. The present invention allows the photocatalyst to be recycled until nearly complete removal of metal ions and organic contaminants is achieved.

Foster, Nancy S. (Boulder, CO); Koval, Carl A. (Golden, CO); Noble, Richard D. (Boulder, CO)

1994-01-01T23:59:59.000Z

218

Coated Metal Articles and Method of Making  

DOE Patents (OSTI)

The method of protectively coating metallic uranium which comprises dipping the metallic uranium in a molten alloy comprising about 20-75% of copper and about 80-25% of tin, dipping the coated uranium promptly into molten tin, withdrawing it from the molten tin and removing excess molten metal, thereupon dipping it into a molten metal bath comprising aluminum until it is coated with this metal, then promptly withdrawing it from the bath.

Boller, Ernest R.; Eubank, Lowell D.

2004-07-06T23:59:59.000Z

219

Semiconductor assisted metal deposition for nanolithography applications  

DOE Patents (OSTI)

An article of manufacture and method of forming nanoparticle sized material components. A semiconductor oxide substrate includes nanoparticles of semiconductor oxide. A modifier is deposited onto the nanoparticles, and a source of metal ions are deposited in association with the semiconductor and the modifier, the modifier enabling electronic hole scavenging and chelation of the metal ions. The metal ions and modifier are illuminated to cause reduction of the metal ions to metal onto the semiconductor nanoparticles.

Rajh, Tijana (Naperville, IL); Meshkov, Natalia (Downers Grove, IL); Nedelijkovic, Jovan M. (Belgrade, YU); Skubal, Laura R. (West Brooklyn, IL); Tiede, David M. (Elmhurst, IL); Thurnauer, Marion (Downers Grove, IL)

2001-01-01T23:59:59.000Z

220

Semiconductor assisted metal deposition for nanolithography applications  

DOE Patents (OSTI)

An article of manufacture and method of forming nanoparticle sized material components. A semiconductor oxide substrate includes nanoparticles of semiconductor oxide. A modifier is deposited onto the nanoparticles, and a source of metal ions are deposited in association with the semiconductor and the modifier, the modifier enabling electronic hole scavenging and chelation of the metal ions. The metal ions and modifier are illuminated to cause reduction of the metal ions to metal onto the semiconductor nanoparticles.

Rajh, Tijana (Naperville, IL); Meshkov, Natalia (Downers Grove, IL); Nedelijkovic, Jovan M. (Belgrade, YU); Skubal, Laura R. (West Brooklyn, IL); Tiede, David M. (Elmhurst, IL); Thurnauer, Marion (Downers Grove, IL)

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Electronic Structure of Noble-Metal-Noble-Metal Alloys  

Science Journals Connector (OSTI)

We describe optical studies of dilute noble-metal-noble-metal alloys. A differential technique compared the reflectance of the alloy with the reflectance of the pure metal and measured a quantity proportional to just the difference in reflectance. The method was particularly sensitive to small changes in reflectances and could be used to study very dilute alloys-the alloys here were between 110- and 3-at.% impurity concentration. The measurements indicated that the noble alloys are of two types. In copper-gold and silver-gold alloys the electron energy bands shift smoothly as the concentration varies. The rates and directions of shifts are determined not only by differences in the host and impurity potentials, but also by the changes in lattice constant, and we emphasize the importance of the latter. In contrast, in copper-silver alloys separate host and impurity d bands are formed.

David Beaglehole and Erich Erlbach

1972-08-15T23:59:59.000Z

222

Electron transport through a metal-molecule-metal junction  

Science Journals Connector (OSTI)

Molecules of bisthiolterthiophene have been adsorbed on the two facing gold electrodes of a mechanically controllable break junction in order to form metal-molecule(s)-metal junctions. Current-voltage (I-V) characteristics have been recorded at room temperature. Zero bias conductances were measured in the 10–100 nS range and different kinds of nonlinear I-V curves with steplike features were reproducibly obtained. Switching between different kinds of I-V curves could be induced by varying the distance between the two metallic electrodes. The experimental results are discussed within the framework of tunneling transport models explicitly taking into account the discrete nature of the electronic spectrum of the molecule.

C. Kergueris; J.-P. Bourgoin; S. Palacin; D. Esteve; C. Urbina; M. Magoga; C. Joachim

1999-05-15T23:59:59.000Z

223

Cold nuclear fusion in metallic hydrogen and normal metals  

Science Journals Connector (OSTI)

The rate of nuclear fusion from tunneling in very dense metallic hydrogen in the core of Jupiter is calculated to be 10-50 per hydrogen-deuterium pair per second. It is estimated that the width of the fusion barrier for deuterium in palladium or a similar metal must be reduced to, of order, 0.1 A? for the fusion rate to be 10-25 per deuterium per second. If this scale is achieved, the ratios of various nuclear reaction rates will be very different for cold versus thermonuclear fusion.

Charles J. Horowitz

1989-10-01T23:59:59.000Z

224

Electron-electron scattering in metal-insulator-metal sandwiches  

Science Journals Connector (OSTI)

We have studied weak localization and electron-electron interaction effects in samples consisting of two thin metal films separated by an insulating layer of SiO. When the SiO thickness was less than about 200 Å, the electron-electron scattering rate was enhanced with respect to that found in isolated, i.e., well-separated, films. This suggests that in the sandwich structures, electrons in one metal film are able to ‘‘communicate’’ with, i.e., scatter from, electrons in the other film across distances of order 200 Å, and that this process enhances the phase-breaking rate.

N. Giordano and N. R. Dilley

1993-08-15T23:59:59.000Z

225

Semiconductor-To-Metal Transitions in Transition-Metal Compounds  

Science Journals Connector (OSTI)

The theory presented in a previous paper is applied to the transition-metal compounds which are known to exhibit semiconductor-to-metal transitions. In particular, the predictions of the theory are compared with the experimental results of Feinleib and Paul on V2O3. Very good agreement is obtained for the magnitude of the energy gap and for its pressure and stress coefficients. The theory appears to be consistent with the available data on the other oxides of vanadium and titanium as well. Band models for all of these compounds are suggested. The effects of spin-disorder scattering and broadening, polaron formation, and non-stoichiometry are considered quantitatively.

David Adler; Julius Feinleib; Harvey Brooks; William Paul

1967-03-15T23:59:59.000Z

226

Approximating Metal-Insulator Transitions  

E-Print Network (OSTI)

We consider quantum wave propagation in one-dimensional quasiperiodic lattices. We propose an iterative construction of quasiperiodic potentials from sequences of potentials with increasing spatial period. At each finite iteration step the eigenstates reflect the properties of the limiting quasiperiodic potential properties up to a controlled maximum system size. We then observe approximate metal-insulator transitions (MIT) at the finite iteration steps. We also report evidence on mobility edges which are at variance to the celebrated Aubry-Andre model. The dynamics near the MIT shows a critical slowing down of the ballistic group velocity in the metallic phase similar to the divergence of the localization length in the insulating phase.

C. Danieli; K. Rayanov; B. Pavlov; G. Martin; S. Flach

2014-05-06T23:59:59.000Z

227

Magnetism of nanosized metallic particles  

Science Journals Connector (OSTI)

The magnetism of a small cluster of magnetic atoms at finite temperatures is numerically investigated. The evolution of the system towards thermal equilibrium is studied, and the possibility of occurrence of vortexlike excitations in the arrangement of the magnetic moments within the cluster is pointed out. The magnetization curve as a function of temperature, of a small magnetic particle, suggests that magnetic clusters in granular metals are not saturated even at room temperature. The relevance of the present results to the understanding of the magnetic behavior of granular metals is discussed.

P. Vargas; J. d’Albuquerque e Castro; D. Altbir

1999-09-01T23:59:59.000Z

228

Atomic and electronic structure of simple metal/graphene and complex metal/graphene/metal interfaces  

Science Journals Connector (OSTI)

Structural, electronic, and magnetic properties of simple interfaces (graphene on top of a metallic substrate) and complex interfaces (a single metallic adlayer on a simple graphene/metal system, either on top or between the graphene and metallic substrate) have been studied using density functional theory. Two types of simple interface with strong (Ni/graphene) and weak (Cu/graphene) bonding were considered. In addition to binding energies and interface distances, which are used to quantify the strength of graphene-substrate interactions, the bonding in simple and complex interfaces was analyzed using charge density distributions and bond orders. Substantial enhancement of the metallic substrate/graphene binding was observed in complex interfaces, consisting of a Ni monolayer on top of a simple {Ni or Cu}/graphene interface. The increase of substrate-graphene bonding in such complex interfaces is accompanied by weakening of in-plane C-C bonds in graphene, as quantified by the bond orders. A weak ferrimagnetism in graphene, i.e., unequal magnetic moments ?0.04?B and +0.06?B on the C atoms, is induced by a ferromagnetic Ni substrate. The strength of graphene-substrate interactions is also reflected in simulated scanning tunneling microscopy images.

Lyudmyla Adamska; You Lin; Andrew J. Ross; Matthias Batzill; Ivan I. Oleynik

2012-05-22T23:59:59.000Z

229

Metal-insulator transition in dilute alkali-metal systems  

Science Journals Connector (OSTI)

The metal-insulator transition is studied for dilute systems of alkali metals. Using a spin-split self-consistent band-structure approach, we find the transition density, a strikingly enhanced magnetic susceptibility, and the electron effective mass. The critical density nc is found to be given by the simple relation rsc=r0+2.8. Here rsc=[3(4?nc)]13 and r0 is the model potential radius which is roughly the radius of the neutral atom. The Mott criterion of nc13aB?0.25 (where aB is the appropriate Bohr orbit) is found to be inadequate for describing these systems. The predicted effective mass and magnetic susceptibility enhancements are largest for Li and become systematically smaller for the heavier alkalis. We compare our results for the transition density with two sets of experiments, namely the gas-liquid critical density and the metal-insulator transition for codeposited thick films of alkali-metal and rare-gas atoms. Good agreement is found in both cases.

J. H. Rose

1981-01-15T23:59:59.000Z

230

Metal-on-Metal Bonding and Rebonding Revisited  

Science Journals Connector (OSTI)

Density-functional calculations for a wide variety of metals show that, contrary to rebonding theory, ad-dimers do not have notably longer surface bonds than adatoms, do not reside farther above the surface, and do not meet the rebonding arguments for augmented mobility. Rebonding contributes to destabilize ad-dimers, but does not explain inherently weak ad-dimer bonds.

Alexander Bogicevic

1999-06-28T23:59:59.000Z

231

Heavy metals in Antarctic organisms  

SciTech Connect

To evaluate levels of essential (zinc and copper) and non-essential (mercury and cadmium) heavy metals, 34 species of organisms from different areas close to the Antarctic Peninsula were analysed. These included algae, filter-feeders, omnivorous invertebrates and vertebrates. Mercury was not detected, while cadmium was found in the majority of organisms analysed (detection limit was 0.05 ppm for both metals). The highest cadmium concentration was observed in the starfish Odontaster validus. Anthozoans, sipunculids and nudibranchs showed maximum levels of zinc, while the highest copper level was found in the gastropod Trophon brevispira. Mercury and cadmium levels in fishes were below the detection limit. Concentrations of essential and non-essential metals in birds were highest in liver followed by muscle and eggs. Cadmium and mercury levels in muscle of southern elephant seals were above the detection limit, whereas in Antarctic fur seals they were below it. The objective of the study was to gather baseline information for metals in Antarctic Ocean biota that may be needed to detect, measure and monitor future environmental changes. 46 refs., 7 figs., 8 tabs.

Moreno, J.E.A. de; Moreno, V.J. [Universidad Nacional de Mar del Plata (Argentina); Gerpe, M.S.; Vodopivez, C. [Instituto Antartico Argentino, Buenos Aires (Argentina)

1997-02-01T23:59:59.000Z

232

Magnetism in amorphous transition metals  

Science Journals Connector (OSTI)

Overall features of magnetism in amorphous transition metals have been investigated on the basis of a finite-temperature theory of the local-environment effect. It is shown that the simple ferromagnetism of Fe, Co, and Ni is drastically changed by structural disorder; amorphous transition metals form spin glasses (SG’s) for compositions near amorphous Fe (6.7?N?7.35), ferromagnets for compositions near amorphous Co (7.35?N?9.0), and paramagnetisms for compositions near amorphous Ni (9.0?N?10.0) where N is the number of d electrons. The SG is accompanied by formation of local ferromagnetic clusters for N?7.2, and shows reentrant behavior at the ferromagnetic boundary N?7.35. The ferromagnetism in amorphous transition metals is shown to be well explained by the main-peak position in the noninteracting densities of states. It is found that structural disorder enhances the Curie temperatures (TC) in the range 7.9?N?8.5 as compared with bcc and fcc structures. These results explain recent experimental data for the SG in Fe-rich amorphous alloys and the high TC in amorphous Co-Y alloys, but they are quite different from the early picture obtained for amorphous transition-metal–metalloid alloys.

Y. Kakehashi

1991-05-01T23:59:59.000Z

233

Electrical Resistance of Ferromagnetic Metals  

Science Journals Connector (OSTI)

......calculate the anomalous electrical resistance from the standpoint of s-d...that the anomalous electrical resistance occurs because the exchange...2012) 064715 (8 pages) Electric and Magnetic Properties of...pp. 335-343 Electrical Resistance of Ferromagnetic Metals Isao......

Tadao Kasuya

1956-07-01T23:59:59.000Z

234

Nanoscale Heat Conduction across Metal-Dielectric Interfaces  

E-Print Network (OSTI)

resistance between a metal and a dielectric material assumedresistance of a metallic film bounded by dielectric materials.resistance of a metallic film bounded by dielectric materials.

Ju, Y. Sungtaek

2005-01-01T23:59:59.000Z

235

A Better Method for Evaluating Heavy Metal Water Pollution  

E-Print Network (OSTI)

efforts to control heavy metal pollution have focused oncomponent of heavy metal pollution, Dr. Hering found thatthat makes measuring heavy metal pollution a moving target.

Hering, Janet

2002-01-01T23:59:59.000Z

236

Engineering embedded metal nanoparticles with ion beam technology  

E-Print Network (OSTI)

2002) Engineering embedded metal nanoparticles with ion beam3 Engineering embedded metal nanoparticles with ion beamcompara- Engineering embedded metal nanoparticles with ion

Ren, Feng; Xiao, Xiang Heng; Cai, Guang Xu; Wang, Jian Bo; Jiang, Chang Zhong

2009-01-01T23:59:59.000Z

237

Gas adsorption on metal-organic frameworks  

DOE Patents (OSTI)

The present invention involves the use of certain metal organic frameworks that have been treated with water or another metal titrant in the storage of carbon dioxide. The capacity of these frameworks is significantly increased through this treatment.

Willis, Richard R. (Cary, IL); Low, John J. (Schaumburg, IL), Faheem, Syed A. (Huntley, IL); Benin, Annabelle I. (Oak Forest, IL); Snurr, Randall Q. (Evanston, IL); Yazaydin, Ahmet Ozgur (Evanston, IL)

2012-07-24T23:59:59.000Z

238

Microstructure of metal-filled carbon nanotubes  

Science Journals Connector (OSTI)

......Microstructure of metal-filled carbon nanotubes Shoichi Toh 1 Kenji Kaneko 2 Yasuhiko...are usually required to produce carbon nanotubes (CNTs) and play important roles during...mechanisms. metal filling|MPCVD|carbon|nanotube|palladium|microstructure| Microstructure......

Shoichi Toh; Kenji Kaneko; Yasuhiko Hayashi; Tomoharu Tokunaga; Won-Jin Moon

2004-04-01T23:59:59.000Z

239

Electrodialysis Treatment of Metal-Cyanide Complexes  

Science Journals Connector (OSTI)

Metal-cyanide complexes have been used for many years as decorative and protective coatings on a variety of metal substrates. The most important method to protect iron and steel against corrosion is the applicati...

Marco Antônio Siqueira Rodrigues; Luciano Marder…

2014-01-01T23:59:59.000Z

240

Transition Metal Ions in the Gas Phase  

Science Journals Connector (OSTI)

For several years we have been studying the chemistry of atomic transition metal ions with simple organic molecules. This research was ... examining the consequences of oxidation and reduction of transition metal...

Douglas P. Ridge

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS  

E-Print Network (OSTI)

CORROSION OF METALS IN OIL SHALE ENVIRONMENTS A. Levy and R.of Metals in In-Situ Oil Shale Retorts," NACE Corrosion 80,Elevated Temperature Corrosion of Oil Shale Retort Component

Bellman Jr., R.

2012-01-01T23:59:59.000Z

242

METAL IONS: Physiological function and Pathological rle  

E-Print Network (OSTI)

disproportion may be dangerous Whether metals are useful or harmful to human health crucially depends contest." #12;Unbalanced metal content may be dangerous abnormally low dietary copper Menkes disease (no

Morante, Silvia

243

NANO - "Green" metal oxides ... | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

NANO - "Green" metal oxides ... Water and nano-sized particles isolated from trees, plants and algae are the ingredients of a new recipe for low-cost metal oxides that are widely...

244

Preparation of metal-triazolate frameworks  

DOE Patents (OSTI)

The disclosure provides for novel metal-triazolate frameworks, methods of use thereof, and devices comprising the frameworks thereof.

Yaghi, Omar M; Uribe-Romo, Fernando J; Gandara-Barragan, Felipe; Britt, David K

2014-10-07T23:59:59.000Z

245

Electronic properties of a simple metal-metal interface  

Science Journals Connector (OSTI)

The properties of metal-metal interfaces are of interest in many metallurgical applications. These include grain boundaries, crack growth, friction, and bimetallic adhesion. The present work is a study of the electronic properties of a simple bimetallic junction. The methods employed to investigate the interface are the Green's-function technique and the phase-shift method. We calculate the Green's function of a simple junction within the tight-binding approximation. The conditions for the occurrence of bound states are deduced from the poles of the Green's function. Using the phase-shift method we derive an expression for the change in density of states due to the creation of the interface. From this expression we derive the corresponding single-particle contribution to the interface energy and the interface specific heat.

Avishay Yaniv

1978-05-15T23:59:59.000Z

246

Metal-nonmetal transition in metal-ammonia solutions  

Science Journals Connector (OSTI)

In this paper we present a coherent physical picture of the metal-nonmetal transition in metal-ammonia solutions in the intermediate concentration range. We propose that in Li-NH3 and Na-NH3 solutions the metallic propagation regime is separated from a nonmetallic regime by a microscopically inhomogeneous regime in which the concentration fluctuates locally about either of two well-defined values M0 and M1, M0>M1, the local concentration remaining near M0 or M1 over radii approximately equal to the Debye short correlation length b for concentration fluctuations. Provided that the concentration-fluctuation decay length is much smaller than b, we can define a percolation problem in which a volume fraction C of the material is occupied by metallic regions of concentration M0, the remainder containing the low concentration M1 of dissociated electron-cation complexes. M0 and M1 constitute the upper and the lower bounds of the inhomogeneous regime, respectively, while C exhibits a linear dependence on M. This physical picture is borne out by concentration-fluctuation determinations based on chemical-potential measurements in Li and Na solutions and by small-angle x-ray and neutron scattering in Li solutions. Assuming that the phase-coherence length of the conduction electrons is shorter than b and having demonstrated that tunneling corrections are negligible, we can define local electronic structure and transport properties. The limits of the inhomogeneous regime were determined from a combination of concentration-fluctuation measurements, electrical conductivity, Hall effect, and paramagnetic susceptibility data to be M0=9 mole percent metal (MPM) and M1=2(13) MPM, which yield the C scale, C=[M-2(13)]6(23), for both Li-NH3 at 223°K and for Na-NH3 at 240°K. We have also established the consistency of our picture with the available magnetic data for Na solutions. An analysis of the electronic and the thermal transport properties was carried out in terms of an effective-medium theory, modified to account for scattering from the boundaries of the metallic clusters. For low values of the conductivity ratio (? 10-3) between the nonmetallic and the metallic regions the modified effective-medium theory is valid for C>0.4. In an attempt to mimic the features of continuous percolation, we have carried out numerical simulations of the conductivity in a simple cubic lattice incorporating correlation between metallic bonds. An excellent fit of the experimental conductivity data for Li and Na with the results of the numerical simulations has been obtained over a three order of magnitude variation of the conductivity throughout the entire inhomogeneous regime. A small systematic negative deviation of the conductivity from the predictions of the effective-medium theory for C>0.4 can be properly accounted for in terms of boundary scattering corrections resulting in b?15 Å for Li at 223°K and b?32 Å for Na at 240°K. The overall agreement of the experimental Hall effect, Hall mobility, thermalconductivity, and thermoelectric-power data with the effective-medium theory is good. The proposed inhomogeneous regime in Li and Na solutions resembles a macroscopic mixed phase at a concentration inside a coexistence curve but with mixing on a microscopic scale. The concentration fluctuations in the inhomogeneous state have nothing to do with critical fluctuations; nevertheless, this state seems to be closely associated with the occurrence of a phase separation.

Joshua Jortner and Morrel H. Cohen

1976-02-15T23:59:59.000Z

247

Growth dynamics at a metal-metal interface  

Science Journals Connector (OSTI)

A determination of the sticking coefficient of sputter-deposited metal films on freshly deposited metal surfaces is described in detail. The systems investigated were Mo deposited on Ta and Ta on Mo. Also described is a detailed determination of the structure of Mo-Ta interfaces using Rutherford backscattering spectrometry and a combination of x-ray diffraction techniques. Within a few angstroms of each interface we find that the lattice is stretched in the growth direction and has an excess of defects relative to the ‘‘bulk’’ lattice. We also find that Mo/Ta superlattices fabricated with wavelengths in the range 20 to 120 A? exhibit structural coherence extending over a number of superlattice layers.

Wayne R. Bennett; J. A. Leavitt; Charles M. Falco

1987-03-15T23:59:59.000Z

248

Metal-dielectric-metal surface plasmon-polariton resonators  

Science Journals Connector (OSTI)

A theoretical study of standing-wave resonances of surface plasmon polaritons (SPPs) in finite-length metal-dielectric-metal cavities is presented. A Fabry-Pérot model is constructed to describe the cavity resonances, and the associated optical parameters are calculated analytically. One key parameter is the phase acquired by resonating SPPs upon reflection from cavity end faces. This phase pickup is associated with the near-field energy storage at these end faces, and the imaginary part of the reflection coefficient is shown to be approximately proportional to the stored energy. Using the Fabry-Pérot model, we also calculate the transmission cross section, peak position, as well as the Q factor of the cavity, and we find good agreement with full-field numerical simulations for a wide range of wavelengths and device dimensions.

Anu Chandran; Edward S. Barnard; Justin S. White; Mark L. Brongersma

2012-02-09T23:59:59.000Z

249

Theory of the alkali-metal chemisorption on metal surfaces  

Science Journals Connector (OSTI)

The electronic structure of the alkali-metal adatom on metal surfaces is studied by a first-principles method as a function of adatom coverage (?). We employ ‘‘jellium’’ as a high-density metal substrate to make a continuous change of ? possible. Although the characteristic variation of the work function with ? is reproduced well by the present calculation, its mechanism is different from a widely accepted mechanism in which the adatom electronic structure is assumed to change from ionic to neutral with increasing ? by the depolarization shift. The charge redistribution ??(r,?) that lowers the work function deviates far from the point-charge-transfer model, and the electrostatic potential change at adatom sites due to ??(r,?) depends very little on ?. Accordingly, the adatom valence density of states shows no downward shift with increasing ?. The adatom region is essentially neutral, even at low ?. The bonding-antibonding boundary in the bond-order density of the adatom-substrate bond coincides well with the Fermi level at low ?, indicating a formation of a metallic bond by the maximum use of bonding states even at low ?. The close similarity between the calculated bond-order and dipole densities as a function of the one-electron energy implies that the adatom polarization due to the hybridization of adatom and substrate orbitals plays an important role for the adatom dipole and its ? dependence even at low ?. The decrease of the adatom dipole is explained by a weakening of the adatom-substrate bonding as well as a significant decrease in the dipole matrix elements with increasing ?.

H. Ishida

1988-10-15T23:59:59.000Z

250

Metal Dusting of Heat-Resistant Alloys  

E-Print Network (OSTI)

Metal dusting leads to disintegration of such alloys as iron and nickel-based into a “dust” of particulate metal, metal carbide, carbon, and/or oxide. It occurs in strongly carburising environments at 400-900°C. Literature survey has shown...

Al-Meshari, Abdulaziz I

251

TRANSITION DE MOTT METAL-INSULATOR TRANSITIONS  

E-Print Network (OSTI)

predominantly non-trivalent ions favor the metallicstate. I. Introduction. -Transition metal oxides form a class that such a transition would be dis- continuous as a function of volume [8], and he later proposed a phase diagramTRANSITION DE MOTT METAL-INSULATOR TRANSITIONS IN TRANSITION METAL OXIDES by D. B. McWHAN, A. MENTH

Paris-Sud XI, Université de

252

Process for making transition metal nitride whiskers  

DOE Patents (OSTI)

A process for making metal nitrides, particularly titanium nitride whiskers, using a cyanide salt as a reducing agent for a metal compound in the presence of an alkali metal oxide. Sodium cyanide, various titanates and titanium oxide mixed with sodium oxide react to provide titanium nitride whiskers that can be used as reinforcement to ceramic composites. 1 fig., 1 tab.

Bamberger, C.E.

1988-04-12T23:59:59.000Z

253

Vivapure Metal Chelate Mega spin columns  

E-Print Network (OSTI)

®® Vivapure Metal Chelate Mega spin columns Hisn Technical data and operating instructions. For in vitro use only. #12;2 Handling overview Vivapure Metal Chelate Mega spin columns - for the purification of proteins with poly-histidine tags Storage conditions Vivapure Metal Chelate Mega spin columns can be stored

Lebendiker, Mario

254

Characterization of Metal-Cyanobacteria Sorption  

E-Print Network (OSTI)

Characterization of Metal-Cyanobacteria Sorption Reactions: A Combined Macroscopic and Infrared titration, and metal sorption experiments to characterize metal-cyanobacteria sorption reactions. Infrared.3 and 4.8 ( 0.3, 6.5 ( 0.1, 8.7 ( 0.2, respectively. Finally, Cu2+, Cd2+, and Pb2+ sorption experiments

Benning, Liane G.

255

Reclaiming metallic material from an article comprising a non-metallic friable substrate  

DOE Patents (OSTI)

A method for reclaiming a metallic material from a article including a non-metallic friable substrate. The method comprising crushing the article into a plurality of pieces. An acidic solution capable of dissolving the metallic material is provided dissolving the metallic material in the acidic material to form an etchant effluent. The etchant effluent is separated from the friable substrate. A precipitation agent, capable of precipitating the metallic material, is added to the etchant effluent to precipitate out the metallic material from the etchant effluent. The metallic material is then recovered.

Bohland, John Raphael (Oregon, OH); Anisimov, Igor Ivanovich (Whitehouse, OH); Dapkus, Todd James (Toledo, OH); Sasala, Richard Anthony (Toledo, OH); Smigielski, Ken Alan (Toledo, OH); Kamm, Kristin Danielle (Swanton, OH)

2000-01-01T23:59:59.000Z

256

Enhanced Bioaccumulation of Heavy Metals by Bacterial Cells Displaying  

E-Print Network (OSTI)

Enhanced Bioaccumulation of Heavy Metals by Bacterial Cells Displaying Synthetic Phytochelatins for enhanced bioaccumulation of toxic metals. Synthetic genes encoding for several metal strategy for develop- ing high-affinity bioadsorbents suitable for heavy metal removal. © 2000 John Wiley

Chen, Wilfred

257

Synthesis of transition metal carbonitrides  

DOE Patents (OSTI)

Transition metal carbonitrides (in particular, titanium carbonitride, TiC.sub.0.5 N.sub.0.5) are synthesized by a self-propagating reaction between the metal (e.g., titanium) and carbon in a nitrogen atmosphere. Complete conversion to the carbonitride phase is achieved with the addition of TiN as diluent and with a nitrogen pressure .gtoreq.0.6 MPa. Thermodynamic phase-stability calculations and experimental characterizations of quenched samples provided revealed that the mechanism of formation of the carbonitride is a two-step process. The first step involves the formation of the nonstoichiometric carbide, TiC.sub.0.5, and is followed by the formation of the product by the incorporation of nitrogen in the defect-structure carbide.

Munir, Zuhair A. R. (Davis, CA); Eslamloo-Grami, Maryam (Davis, CA)

1994-01-01T23:59:59.000Z

258

Magnons in ferromagnetic metallic manganites  

SciTech Connect

Ferromagnetic (FM) manganites, a group of likely half-metallic oxides, are of special interest not only because they are a testing ground for the classical double-exchange interaction mechanism for the colossal magnetoresistance, but also because they exhibit an extraordinary arena of emergent phenomena. These emergent phenomena are related to the complexity associated with strong interplay between charge, spin, orbital, and lattice. In this review, we focus on the use of inelastic neutron scattering to study the spin dynamics, mainly the magnon excitations in this class of FM metallic materials. In particular, we discuss the unusual magnon softening and damping near the Brillouin zone boundary in relatively narrow-band compounds with strong Jahn CTeller lattice distortion and charge Corbital correlations. The anomalous behaviours of magnons in these compounds indicate the likelihood of cooperative excitations involving spin and lattice as well as orbital degrees of freedom.

Zhang, Jiandi [Florida International University, Miami; Ye, Feng [ORNL; Sha, Hao [Florida International University, Miami; Dai, Pengcheng [ORNL; Fernandez-Baca, Jaime A [ORNL; Plummer, E Ward [ORNL

2007-01-01T23:59:59.000Z

259

Dose Rates from Plutonium Metal and Beryllium Metal in a 9975 Shipping Container  

SciTech Connect

A parametric study was performed of the radiation dose rates that might be produced if plutonium metal and beryllium metal were shipped in the 9975 shipping package. These materials consist of heterogeneous combinations plutonium metal and beryllium. The plutonium metal content varies up to 4.4 kilograms while the beryllium metal varies up to 4 kilograms. This paper presents the results of that study.

Nathan, S.J.

2002-02-04T23:59:59.000Z

260

Liquid metal Flow Meter - Final Report  

SciTech Connect

Measuring the flow of liquid metal presents serious challenges. Current commercially-available flow meters use ultrasonic, electromagnetic, and other technologies to measure flow, but are inadequate for liquid metal flow measurement because of the high temperatures required by most liquid metals. As a result of the reactivity and high temperatures of most liquid metals, corrosion and leakage become very serious safety concerns. The purpose of this project is to develop a flow meter for Lockheed Martin that measures the flow rate of molten metal in a conduit.

Andersen C, Hoogendoom S, Hudson B, Prince J, Teichert K, Wood J, Chase K

2007-01-30T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Direct electrochemical reduction of metal-oxides  

DOE Patents (OSTI)

A method of controlling the direct electrolytic reduction of a metal oxide or mixtures of metal oxides to the corresponding metal or metals. A non-consumable anode and a cathode and a salt electrolyte with a first reference electrode near the non-consumable anode and a second reference electrode near the cathode are used. Oxygen gas is produced and removed from the cell. The anode potential is compared to the first reference electrode to prevent anode dissolution and gas evolution other than oxygen, and the cathode potential is compared to the second reference electrode to prevent production of reductant metal from ions in the electrolyte.

Redey, Laszlo I. (Downers Grove, IL); Gourishankar, Karthick (Downers Grove, IL)

2003-01-01T23:59:59.000Z

262

Method for gas-metal arc deposition  

DOE Patents (OSTI)

Method and apparatus for gas-metal arc deposition of metal, metal alloys, and metal matrix composites. The apparatus contains an arc chamber for confining a D.C. electrical arc discharge, the arc chamber containing an outlet orifice in fluid communication with a deposition chamber having a deposition opening in alignment wiht the orifice for depositing metal droplets on a coatable substrate. Metal wire is passed continuously into the arc chamber in alignment with the orifice. Electric arcing between the metal wire anode and the orifice cathode produces droplets of molten metal from the wire which pass through the orifice and into the deposition chamber for coating a substrate exposed at the deposition opening. When producing metal matrix composites, a suspension of particulates in an inert gas enters the deposition chamber via a plurality of feed openings below and around the orifice so that reinforcing particulates join the metal droplets to produce a uniform mixture which then coats the exposed substrate with a uniform metal matrix composite.

Buhrmaster, Carol L. (Corning, NY); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID)

1990-01-01T23:59:59.000Z

263

Method for gas-metal arc deposition  

DOE Patents (OSTI)

Method and apparatus for gas-metal arc deposition of metal, metal alloys, and metal matrix composites are disclosed. The apparatus contains an arc chamber for confining a D.C. electrical arc discharge, the arc chamber containing an outlet orifice in fluid communication with a deposition chamber having a deposition opening in alignment with the orifice for depositing metal droplets on a coatable substrate. Metal wire is passed continuously into the arc chamber in alignment with the orifice. Electric arcing between the metal wire anode and the orifice cathode produces droplets of molten metal from the wire which pass through the orifice and into the deposition chamber for coating a substrate exposed at the deposition opening. When producing metal matrix composites, a suspension of particulates in an inert gas enters the deposition chamber via a plurality of feed openings below and around the orifice so that reinforcing particulates join the metal droplets to produce a uniform mixture which then coats the exposed substrate with a uniform metal matrix composite. 1 fig.

Buhrmaster, C.L.; Clark, D.E.; Smartt, H.B.

1990-11-13T23:59:59.000Z

264

Apparatus for gas-metal arc deposition  

DOE Patents (OSTI)

Apparatus for gas-metal arc deposition of metal, metal alloys, and metal matrix composites. The apparatus contains an arc chamber for confining a D.C. electrical arc discharge, the arc chamber containing an outlet orifice in fluid communication with a deposition chamber having a deposition opening in alignment with the orifice for depositing metal droplets on a coatable substrate. Metal wire is passed continuously into the arc chamber in alignment with the orifice. Electric arcing between the metal wire anode and the orifice cathode produces droplets of molten metal from the wire which pass through the orifice and into the deposition chamber for coating a substrate exposed at the deposition opening. When producing metal matrix composites, a suspenion of particulates in an inert gas enters the deposition chamber via a plurality of feed openings below and around the orifice so that reinforcing particulates join the metal droplets to produce a uniform mixture which then coats the exposed substrate with a uniform metal matrix composite.

Buhrmaster, Carol L. (Corning, NY); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID)

1991-01-01T23:59:59.000Z

265

Metal resistance sequences and transgenic plants  

SciTech Connect

The present invention provides nucleic acid sequences encoding a metal ion resistance protein, which are expressible in plant cells. The metal resistance protein provides for the enzymatic reduction of metal ions including but not limited to divalent Cu, divalent mercury, trivalent gold, divalent cadmium, lead ions and monovalent silver ions. Transgenic plants which express these coding sequences exhibit increased resistance to metal ions in the environment as compared with plants which have not been so genetically modified. Transgenic plants with improved resistance to organometals including alkylmercury compounds, among others, are provided by the further inclusion of plant-expressible organometal lyase coding sequences, as specifically exemplified by the plant-expressible merB coding sequence. Furthermore, these transgenic plants which have been genetically modified to express the metal resistance coding sequences of the present invention can participate in the bioremediation of metal contamination via the enzymatic reduction of metal ions. Transgenic plants resistant to organometals can further mediate remediation of organic metal compounds, for example, alkylmetal compounds including but not limited to methyl mercury, methyl lead compounds, methyl cadmium and methyl arsenic compounds, in the environment by causing the freeing of mercuric or other metal ions and the reduction of the ionic mercury or other metal ions to the less toxic elemental mercury or other metals.

Meagher, Richard Brian (Athens, GA); Summers, Anne O. (Athens, GA); Rugh, Clayton L. (Athens, GA)

1999-10-12T23:59:59.000Z

266

Ravi Metallics Ltd | Open Energy Information  

Open Energy Info (EERE)

Metallics Ltd Metallics Ltd Jump to: navigation, search Name Ravi Metallics Ltd. Place Rourkela, Orissa, India Zip 769004 Sector Biomass Product Rourkela-based biomass project developer. References Ravi Metallics Ltd.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Ravi Metallics Ltd. is a company located in Rourkela, Orissa, India . References ↑ "Ravi Metallics Ltd." Retrieved from "http://en.openei.org/w/index.php?title=Ravi_Metallics_Ltd&oldid=350202" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

267

Method of nitriding refractory metal articles  

DOE Patents (OSTI)

A method of nitriding a refractory-nitride forming metal or metalloid articles and composite articles. A consolidated metal or metalloid article or composite is placed inside a microwave oven and nitrogen containing gas is introduced into the microwave oven. The metal or metalloid article or composite is heated to a temperature sufficient to react the metal or metalloid with the nitrogen by applying a microwave energy within the microwave oven. The metal or metalloid article or composite is maintained at that temperature for a period of time sufficient to convert the article of metal or metalloid or composite to an article or composite of refractory nitride. In addition, a method of applying a coating, such as a coating of an oxide, a carbide, or a carbo-nitride, to an article of metal or metalloid by microwave heating.

Tiegs, Terry N. (Lenoir City, TN); Holcombe, Cressie E. (Knoxville, TN); Dykes, Norman L. (Oak Ridge, TN); Omatete, Ogbemi O. (Lagos, NG); Young, Albert C. (Flushing, NY)

1994-01-01T23:59:59.000Z

268

Method of nitriding refractory metal articles  

DOE Patents (OSTI)

A method of nitriding a refractory-nitride forming metal or metalloid articles and composite articles. A consolidated metal or metalloid article or composite is placed inside a microwave oven and nitrogen containing gas is introduced into the microwave oven. The metal or metalloid article or composite is heated to a temperature sufficient to react the metal or metalloid with the nitrogen by applying a microwave energy within the microwave oven. The metal or metalloid article or composite is maintained at that temperature for a period of time sufficient to convert the article of metal or metalloid or composite to an article or composite of refractory nitride. In addition, a method of applying a coating, such as a coating of an oxide, a carbide, or a carbo-nitride, to an article of metal or metalloid by microwave heating.

Tiegs, T.N.; Holcombe, C.E.; Dykes, N.L.; Omatete, O.O.; Young, A.C.

1994-03-15T23:59:59.000Z

269

Methods of selectively incorporating metals onto substrates  

DOE Patents (OSTI)

A method for forming multi-metallic sites on a substrate is disclosed and described. A substrate including active groups such as hydroxyl can be reacted with a pretarget metal complex. The target metal attached to the active group can then be reacted with a secondary metal complex such that an oxidation-reduction (redox) reaction occurs to form a multi-metallic species. The substrate can be a highly porous material such as aerogels, xerogels, zeolites, and similar materials. Additional metal complexes can be reacted to increase catalyst loading or control co-catalyst content. The resulting compounds can be oxidized to form oxides or reduced to form metals in the ground state which are suitable for practical use.

Ernst; Richard D. (Salt Lake City, UT), Eyring; Edward M. (Salt Lake City, UT), Turpin; Gregory C. (Salt Lake City, UT), Dunn; Brian C. (Salt Lake City, UT)

2008-09-30T23:59:59.000Z

270

REVIEW PAPER How metal-tolerant ecotypes of ectomycorrhizal fungi  

E-Print Network (OSTI)

with open access at Springerlink.com Abstract & Introduction Heavy metal pollution is a strong driver for heavy metal-contaminated soils. Keywords Heavy metal pollution . Heavy metal tolerance . EctomycorrhizalREVIEW PAPER How metal-tolerant ecotypes of ectomycorrhizal fungi protect plants from heavy metal

Boyer, Edmond

271

A method for making dendritic metal nanostructures using a surfactant structure template, a metal salt, and electron donor species.  

DOE Patents (OSTI)

A method for making dendritic metal nanostructures using a surfactant structure template, a metal salt, and electron donor species.

Shelnutt, John A. (Tijeras, NM); Song, Yujiang (Albuquerque, NM); Pereira, Eulalia F. (Vila Nova de Gaia, PT); Medforth, Craig J. (Winters, CA)

2008-05-20T23:59:59.000Z

272

Metal Can and Bottle FabricationMetal Can and Bottle Fabrication ME 4210: Manufacturing Processes and Engineering  

E-Print Network (OSTI)

;Metal BottlesMetal Bottles ME 4210: Manufacturing Processes and Engineering Prof. J.S. Colton © GIT 2009

Colton, Jonathan S.

273

Metal-Polymer Interactions in a Polymer/Metal Nanocomposite  

Science Journals Connector (OSTI)

A poly(t-butyl acrylate)/gold nanocomposite sandwich was annealed to induce diffusion of the gold particles, which was monitored using Rutherford backscattering spectrometry. Marker motion experiments were also performed to probe particle and polymer mobilities independently. The experiments revealed that particle mobility was decreased by 2 to 3 orders of magnitude compared with the predictions by Stokes-Einstein theory. Diffusion of polymer molecules through a gold particle layer is decreased by a much smaller extent. These results are attributed to bridging between particles arising from slow exchange kinetics of polymer segments at the polymer/metal interface.

Douglas H. Cole; Kenneth R. Shull; L. E. Rehn; P. Baldo

1997-06-30T23:59:59.000Z

274

"EOD, Up!" how explosive ordnance disposal forces can best support special operations forces .  

E-Print Network (OSTI)

??U.S. special operations forces (SOF) are likely to undertake missions against terrorists, insurgents, and other enemies where they will encounter explosive hazards. Identification, detection, and… (more)

Draper, Stephen R.

2006-01-01T23:59:59.000Z

275

New high-nitrogen energetic materials for gas generators in space ordnance  

SciTech Connect

High-nitrogen nitroheterocyclic energetic compounds are used as explosives, propellants, and gas generants when safe, thermally stable, cool-burning energetic materials are desired. A series of compounds are compared for sensitivity properties and calculated burn performance. Thermodynamic equilibrium calculations by NASA/Lewis rocket propellant and Blake gun propellant codes gave flame temperatures, average molecular weight, and identity of the equilibrium burn products for ambient, rocket, and gun pressure environments. These compounds were subjected to calculations both as monopropellants and as 50/50 weight ratio mixtures with ammonium nitrate (AN). Special attention was paid to calculated toxic products such as carbon monoxide and hydrogen cyanide, and how these were affected by the addition of an oxidizer AN. Several compounds were noted for further calculations of a formulation ad experimental evaluation.

Campbell, M.S.; Lee, Kien-Yin; Hiskey, M.A.

1995-08-01T23:59:59.000Z

276

16th Century Cast-Bronze Ordnance at the Museu de Angra do Heroismo  

E-Print Network (OSTI)

Within the collections of the Museu de Angra do Heroismo (Terceira Island, Azores, Portugal) are nine cast bronze guns from the 16th century. Most were raised from the seafloor between the 1960s and 1990s, but this study comprises the first in...

Hoskins, Sara Grace

2004-09-30T23:59:59.000Z

277

Method and apparatus for dissociating metals from metal compounds extracted into supercritical fluids  

DOE Patents (OSTI)

A method for dissociating metal-ligand complexes in a supercritical fluid by treating the metal-ligand complex with heat and/or reducing or oxidizing agents is described. Once the metal-ligand complex is dissociated, the resulting metal and/or metal oxide form fine particles of substantially uniform size. In preferred embodiments, the solvent is supercritical carbon dioxide and the ligand is a .beta.-diketone such as hexafluoroacetylacetone or dibutyldiacetate. In other preferred embodiments, the metals in the metal-ligand complex are copper, silver, gold, tungsten, titanium, tantalum, tin, or mixtures thereof. In preferred embodiments, the reducing agent is hydrogen. The method provides an efficient process for dissociating metal-ligand complexes and produces easily-collected metal particles free from hydrocarbon solvent impurities. The ligand and the supercritical fluid can be regenerated to provide an economic, efficient process.

Wai, Chien M. (Moscow, ID); Hunt, Fred H. (Moscow, ID); Smart, Neil G. (Workington, GB); Lin, Yuehe (Richland, WA)

2000-01-01T23:59:59.000Z

278

Heavy metal removal and recovery using microorganisms  

SciTech Connect

Microorganisms -- bacteria, fungi, and microalgae -- can accumulate relatively large amounts of toxic heavy metals and radionuclides from the environment. These organisms often exhibit specificity for particular metals. The metal content of microbial biomass can be a substantial fraction of total dry weight with concentration factors (metal in dry biomass to metal in solution) exceeding one million in some cases. Both living and inert (dead) microbial biomass can be used to reduce heavy metal concentrations in contaminated waters to very low levels -- parts per billion and even lower. In many respects (e.g. specificity, residual metal concentrations, accumulation factors, and economics) microbial bioremoval processes can be superior to conventional processes, such as ion exchange and caustic (lime or hydroxide) precipitation for heavy metals removal from waste and contaminated waters. Thus, bioremoval could be developed to contribute to the clean-up of wastes at the Savannah River Site (SRS) and other DOE facilities. However, the potential advantages of bioremoval processes must still be developed into practical operating systems. A detailed review of the literature suggests that appropriate bioremoval processes could be developed for the SRS. There is great variability from one biomass source to another in bioremoval capabilities. Bioremoval is affected by pH, other ions, temperature, and many other factors. The biological (living vs. dead) and physical (immobilized vs. dispersed) characteristics of the biomass also greatly affect metal binding. Even subtle differences in the microbial biomass, such as the conditions under which it was cultivated, can have major effects on heavy metal binding.

Wilde, E.W. (Westinghouse Savannah River Co., Aiken, SC (United States)); Benemann, J.R. (Benemann (J.R.), Pinole, CA (United States))

1991-02-01T23:59:59.000Z

279

Methods of producing adsorption media including a metal oxide  

DOE Patents (OSTI)

Methods of producing a metal oxide are disclosed. The method comprises dissolving a metal salt in a reaction solvent to form a metal salt/reaction solvent solution. The metal salt is converted to a metal oxide and a caustic solution is added to the metal oxide/reaction solvent solution to adjust the pH of the metal oxide/reaction solvent solution to less than approximately 7.0. The metal oxide is precipitated and recovered. A method of producing adsorption media including the metal oxide is also disclosed, as is a precursor of an active component including particles of a metal oxide.

Mann, Nicholas R; Tranter, Troy J

2014-03-04T23:59:59.000Z

280

Polymer quenched prealloyed metal powder  

DOE Patents (OSTI)

A powder metallurgical process of preparing a sheet from a powder having an intermetallic alloy composition such as an iron, nickel or titanium aluminide. The sheet can be manufactured into electrical resistance heating elements having improved room temperature ductility, electrical resistivity, cyclic fatigue resistance, high temperature oxidation resistance, low and high temperature strength, and/or resistance to high temperature sagging. The iron aluminide has an entirely ferritic microstructure which is free of austenite and can include, in weight %, 4 to 32% Al, and optional additions such as .ltoreq.1% Cr, .gtoreq.0.05% Zr .ltoreq.2% Ti, .ltoreq.2% Mo, .ltoreq.1% Ni, .ltoreq.0.75% C, .ltoreq.0.1% B, .ltoreq.1% submicron oxide particles and/or electrically insulating or electrically conductive covalent ceramic particles, .ltoreq.1% rare earth metal, and/or .ltoreq.3 % Cu. The process includes forming a non-densified metal sheet by consolidating a powder having an intermetallic alloy composition such as by roll compaction, tape casting or plasma spraying, forming a cold rolled sheet by cold rolling the non-densified metal sheet so as to increase the density and reduce the thickness thereof and annealing the cold rolled sheet. The powder can be a water, polymer or gas atomized powder which is subjecting to sieving and/or blending with a binder prior to the consolidation step. After the consolidation step, the sheet can be partially sintered. The cold rolling and/or annealing steps can be repeated to achieve the desired sheet thickness and properties. The annealing can be carried out in a vacuum furnace with a vacuum or inert atmosphere. During final annealing, the cold rolled sheet recrystallizes to an average grain size of about 10 to 30 .mu.m. Final stress relief annealing can be carried out in the B2 phase temperature range.

Hajaligol, Mohammad R. (Midlothian, VA); Fleischhauer, Grier (Midlothian, VA); German, Randall M. (State College, PA)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Metallic bonding in magnesium microclusters  

Science Journals Connector (OSTI)

We investigate the size evolution of bonding in magnesium clusters Mgn, with n?20. Computations are performed in the density-functional scheme with two prescriptions for the exchange-correlation energy: the local-density approximation (LDA), and an improved scheme including gradient corrections (GC). The LDA results show that Mg10 clusters already have acquired several of the characteristic features of metallic aggregates. GC significantly decrease the cohesive energies, and predict a slower convergence with n to the bulk, without changing, however, the qualitative picture given by LDA.

P. Delaly; P. Ballone; J. Buttet

1992-02-15T23:59:59.000Z

282

Clamshell closure for metal drum  

DOE Patents (OSTI)

Closure ring to retain a lid in contact with a metal drum in central C-section conforming to the contact area between a lid and the rim of a drum and further having a radially inwardly directed flange and a vertically downwardly directed flange attached to the opposite ends of the C-section. The additional flanges reinforce the top of the drum by reducing deformation when the drum is dropped and maintain the lid in contact with the drum. The invention is particularly valuable in transportation and storage of fissile material.

Blanton, Paul S

2014-09-30T23:59:59.000Z

283

Contour forming of metals by laser peening  

DOE Patents (OSTI)

A method and apparatus are provided for forming shapes and contours in metal sections by generating laser induced compressive stress on the surface of the metal workpiece. The laser process can generate deep compressive stresses to shape even thick components without inducing unwanted tensile stress at the metal surface. The precision of the laser-induced stress enables exact prediction and subsequent contouring of parts. A light beam of 10 to 100 J/pulse is imaged to create an energy fluence of 60 to 200 J/cm.sup.2 on an absorptive layer applied over a metal surface. A tamping layer of water is flowed over the absorptive layer. The absorption of laser light causes a plasma to form and consequently creates a shock wave that induces a deep residual compressive stress into the metal. The metal responds to this residual stress by bending.

Hackel, Lloyd (Livermore, CA); Harris, Fritz (Rocklin, CA)

2002-01-01T23:59:59.000Z

284

Liquid metal cooled nuclear reactor plant system  

DOE Patents (OSTI)

A liquid metal cooled nuclear reactor having a passive cooling system for removing residual heat resulting for fuel decay during reactor shutdown, or heat produced during a mishap. The reactor system is enhanced with sealing means for excluding external air from contact with the liquid metal coolant leaking from the reactor vessel during an accident. The invention also includes a silo structure which resists attack by leaking liquid metal coolant, and an added unique cooling means.

Hunsbedt, Anstein (Los Gatos, CA); Boardman, Charles E. (Saratoga, CA)

1993-01-01T23:59:59.000Z

285

Three-Electrode Metal Oxide Reduction Cell  

DOE Patents (OSTI)

A method of electrochemically reducing a metal oxide to the metal in an electrochemical cell is disclosed along with the cell. Each of the anode and cathode operate at their respective maximum reaction rates. An electrolyte and an anode at which oxygen can be evolved, and a cathode including a metal oxide to be reduced are included as is a third electrode with independent power supplies connecting the anode and the third electrode and the cathode and the third electrode.

Dees, Dennis W. (Downers Grove, IL); Ackerman, John P. (Downers Grove, IL)

2005-06-28T23:59:59.000Z

286

Three-electrode metal oxide reduction cell  

DOE Patents (OSTI)

A method of electrochemically reducing a metal oxide to the metal in an electrochemical cell is disclosed along with the cell. Each of the anode and cathode operate at their respective maximum reaction rates. An electrolyte and an anode at which oxygen can be evolved, and a cathode including a metal oxide to be reduced are included as is a third electrode with independent power supplies connecting the anode and the third electrode and the cathode and the third electrode.

Dees, Dennis W. (Downers Groves, IL); Ackerman, John P. (Downers Grove, IL)

2008-08-12T23:59:59.000Z

287

The metallicity of galactic winds  

E-Print Network (OSTI)

The abundance evolution of galaxies depends critically on the balance between the mixing of metals in their interstellar medium, the inflow of new gas and the outflow of enriched gas. We study these processes in gas columns perpendicular to a galactic disk using sub-parsec resolution simulations that track stellar ejecta with the Flash code. We model a simplified interstellar medium stirred and enriched by supernovae and their progenitors. We vary the density distribution of the gas column and integrate our results over an exponential disk to predict wind and ISM enrichment properties for disk galaxies. We find that winds from more massive galaxies are hotter and more highly enriched, in stark contrast to that which is often assumed in galaxy formation models. We use these findings in a simple model of galactic enrichment evolution, in which the metallicity of forming galaxies is the result of accretion of nearly pristine gas and outflow of enriched gas along an equilibrium sequence. We compare these predicti...

Creasey, Peter; Bower, Richard G

2014-01-01T23:59:59.000Z

288

Pyroprocessing of IFR Metal Fuel  

SciTech Connect

The Integral Fast Reactor (IFR) fuel cycle features the use of an innovative reprocessing method, known as {open_quotes}pyroprocessing{close_quotes} featuring fused-salt electrofining of the spent fuel. Electrofining of IFR spent fuel involves uranium recovery by electro-transport to a solid steel cathode. The thermodynamics of the system preclude plutonium recovery in the same way, so a liquid cadmium cathode located in the electrolyte salt phase is utilized. The deposition of Pu, Am, Np, and Cm takes place at the liquid cadmium cathode in the form of cadmium intermetallic compounds (e.g, PuCd{sub 6}), and uranium deposits as the pure metal when cadmium saturation is reached. A small amount of rare earth fission products deposit together with the heavy metals at both the solid and liquid cadmium cathodes, providing a significant degree of self-protection. A full scope demonstration of the IFR fuel cycle will begin in 1993, using fuel irradiated in EBR-II.

Laidler, J.J. [Argonne National Laboratory, IL (United States)

1993-12-31T23:59:59.000Z

289

Laser Decontamination of Metals | The Ames Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Laser Decontamination of Metals Zapping contamination with lasers may be just the answer for safely and efficiently treating some of the waste awaiting disposal across the country....

290

Electrical and structural characterization of metal germanides.  

E-Print Network (OSTI)

??Metal-semiconductor contacts have been widely studied in the past 60 years. These structures are of importance in the microelectronics industry. As the scaling down of… (more)

Chawanda, Albert

2011-01-01T23:59:59.000Z

291

Nitrided Metallic Bipolar Plates | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nitrided Metallic Bipolar Plates Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications: 2010 Update Mass Production Cost Estimation...

292

Metallic Bipolar Plates with Composite Coatings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bipolar Plates with Composite Coatings Jennifer Mawdsley Argonne National Laboratory Fuel Cell Projects Kickoff Meeting Washington DC October 1, 2009 2 Metallic Bipolar Plates with...

293

Crystallography of metal-organic frameworks  

Science Journals Connector (OSTI)

Recent advances in the crystallography of metal-organic frameworks (MOFs) are reviewed, including crystal growth, structural elucidation, in-situ and non-ambient crystallography.

G?ndara, F.

2014-10-28T23:59:59.000Z

294

Raman spectroscopy of metallic carbon nanotubes  

E-Print Network (OSTI)

Metallic carbon nanotubes are one dimensional conductors that are both technologically promising for electronic applications, and scientifically interesting for studying the physics of low dimensional materials. In this ...

Farhat, Hootan

2010-01-01T23:59:59.000Z

295

A Metal-Ion Coordinated Hybrid Multilayer  

Science Journals Connector (OSTI)

A Metal-Ion Coordinated Hybrid Multilayer ... Support of this work by the Israel Science Foundation and the Israel Ministry of Science (Tashtiot Infrastructure Program), is gratefully acknowledged. ...

Anat Hatzor; Tamar van der Boom-Moav; Shira Yochelis; Alexander Vaskevich; Abraham Shanzer; Israel Rubinstein

2000-04-21T23:59:59.000Z

296

Recommendation 221: Recommendation Regarding Recycling of Metals...  

Office of Environmental Management (EM)

recycling program to address radiologically contaminated metals and equipment for free-release. Recommendation 221 Responseto221.pdf More Documents & Publications EM SSAB...

297

Method of measuring metal coating adhesion  

DOE Patents (OSTI)

A method for measuring metal coating adhesion to a substrate material comprising the steps of preparing a test coupon of substrate material having the metal coating applied to one surface thereof, applying a second metal coating of gold or silver to opposite surfaces of the test coupon by hot hollow cathode process, applying a coating to one end of each of two pulling rod members, joining the coated ends of the pulling rod members to said opposite coated surfaces of the test coupon by a solid state bonding technique and finally applying instrumented static tensile loading to the pulling rod members until fracture of the metal coating adhesion to the substrate material occurs.

Roper, John R. (Northglenn, CO)

1985-01-01T23:59:59.000Z

298

Magnetism in metal-organic capsules  

E-Print Network (OSTI)

Quantum Spin Chains in Magnetism: Molecules to Materials, J.Magnetism in metal-organic capsules Jerry L. Atwood,* a Euan

Atwood, Jerry L.

2010-01-01T23:59:59.000Z

299

Preparation of metal-catecholate frameworks  

SciTech Connect

The disclosure provides for metal catecholate frameworks, and methods of use thereof, including gas separation, gas storage, catalysis, tunable conductors, supercapacitors, and sensors.

Yaghi, Omar M.; Gandara-Barragan, Felipe; Lu, Zheng; Wan, Shun

2014-06-03T23:59:59.000Z

300

Adsorption of Chromium (VI) by metal hydroxide sludge from the metal finishing  

E-Print Network (OSTI)

and Management, United States (2008)" #12;2 1 Introduction Industrial aqueous pollution (heavy metals) accounts sludge (MHS) during the treatment of their liquid effluents charged with heavy metals. Generally, a small for 30 to 40% of industrial pollution. Metal finishing is one of the sectors which contributes mostly

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Dispersion of plasmons at the surface of a metal and at the interface between two metals  

Science Journals Connector (OSTI)

The dispersion of plasmons at the surface of a metal and at the interface between two metals is derived by a proper combination of electrodynamics with the hydrodynamic approximation. With a two-step model we discuss the effect of a transition region at the surface of a metal and we so explain recent measurements by Krane and Raether for aluminum.

F. Forstmann and H. Stenschke

1978-02-15T23:59:59.000Z

302

Nonequilibrium Phenomena in Electron Tunneling in Normal Metal-Insulator-Metal Junctions  

Science Journals Connector (OSTI)

Structure in the conductance of normal metal-insulator-metal junctions at very low bias is explained through a nonequilibrium treatment of the tunneling process. In particular, the related peak in the derivative d?(V)dV is quantitatively accounted for by the blocking of otherwise available electron tunneling states due to the finite electron relaxation rates in the metal electrodes.

P. N. Trofimenkoff; H. J. Kreuzer; W. J. Wattamaniuk; J. G. Adler

1972-08-28T23:59:59.000Z

303

The Electrical Resistance of Metals.  

Science Journals Connector (OSTI)

Electrical Resistance of Eighteen Elements.—The paper contains a brief summary of an extensive series of measurements which are to be published in detail elsewhere made to determine the effect of pressures up to 12000 kg. per sq. cm. and of temperatures from 0° to 275° C. on the resistance of lithium, sodium, potassium, gallium, bismuth, mercury, calcium, strontium, magnesium, titanium, zirconium, arsenic, tungsten, lanthannum, neodymium, carbon (amorphous and graphitic), silicon, and black phosphorus. The data for tungsten and magnesium are improvements on data previously published; the data for the other substances are new. The first six of these elements were studied in both the liquid and the solid states. The pressure coefficients of solid calcium, solid strontium, and both solid and liquid lithium are positive; the coefficient of bismuth is positive in the solid state, but negative in the liquid.Modified Electron Theory of Metallic Conduction.—A previous theoretical discussion of measurements of the effect of pressure on resistance suggested most strongly that in metallic conduction the electrons pass through the substance of the atoms, and that the mechanism by which resistance is produced is intimately connected with the amplitude of atomic vibration. This view is here given quantitative form. The classical expression for conductivity, ?=(e22m)(nlv), is retained; the number of free electrons is supposed to remain constant, their velocity is taken to be that of a gas particle of the same mass and temperature, and their mean free path is supposed to be many times the distance between atomic centers. The variations of path are then computed in terms of the variations of amplitude, and thus the variations of resistance are obtained and checked with experimental results. It is shown that the theory in this form explains Ohm's law, gives the correct temperature coefficient and the most important part of the pressure coefficient, avoids the difficulty of the classical theory with reference to specific heats, indicates a vanishing resistance at low temperatures, leaving open the possibility of super-conductivity, and retains the classical expression for the Wiedemann-Franz ratio. Besides these quantitative checks, the theory is shown to be entirely consistent qualitatively with all the new data; in fact, many of these new results, particularly the effect of pressure and temperature on the relative resistance of solid and liquid, seem to demand uniquely this conception of metallic conduction.

P. W. Bridgman

1921-02-01T23:59:59.000Z

304

Gold Nanoparticle-Based Sensing of "Spectroscopically Silent" Heavy Metal  

E-Print Network (OSTI)

of aqueous heavy metal ions, including toxic metals such as lead, cadmium, and mercury, is describedLetters Gold Nanoparticle-Based Sensing of "Spectroscopically Silent" Heavy Metal Ions Youngjin Kim that by functionalizing metal nanoparticles with appropriate heavy-metal ion receptors, the particles might be coaxed

305

Chemistry 330 / Study Guide 217 Toxic Heavy Metals  

E-Print Network (OSTI)

Chemistry 330 / Study Guide 217 Unit 7 Toxic Heavy Metals Overview In ancient Rome wine was stored for this section. #12;Chemistry 330 / Study Guide 219 Common Features--Toxicity of the Heavy Metals Objectives. Metals--especially heavy metals--pose a unique environmental pollution problem. Heavy metals

Short, Daniel

306

Chapter 14 - Metal oxide nanopowder  

Science Journals Connector (OSTI)

Research into soft chemical techniques has gained an importance for the synthesis of high quality advanced nanosized materials with desired properties at the low crystallization temperature. The closer interaction between the material chemists and alkoxide chemists has led to the molecular design of more suitable precursors, for fabrication of functional material has resulted in synergetic developments in both the fields. Metal alkoxide is a versatile precursor and is used for the synthesis of functional gradient nanomaterials, and characterization of materials was carried out in term of composition, microstructure and specific surface area. The write-up provides simple and convenient routes to many building blocks for assembling the structure with novel properties and its functional use in nanotechnology.

Taimur Athar

2015-01-01T23:59:59.000Z

307

GASAR porous metals process control  

SciTech Connect

GASAR porous metals are produced by melting under a partial pressure of hydrogen and then casting into a mold that ensures directional solidification. Hydrogen is driven out of solution and usually grows as quasi-cylindrical pores normal to the solidification front. Experiments with pure nickel have been carried out under processing conditions of varying H{sub 2} partial pressure, total pressure (H{sub 2} + Ar), and superheat. An analysis that considers heterogeneous bubble nucleation was developed that identifies processing conditions in which hydrogen bubbles are stable in the liquid before solidification. It is hypothesized that these conditions lead to low porosity because these bubbles float out of the melt and escape the advancing solidification front. Experimental data are shown to support this hypothesis.

Apprill, J.M.; Poirier, D.R. [Univ. of Arizona, Tucson, AZ (United States); Maguire, M.C. [Sandia National Labs., Albuquerque, NM (United States); Gutsch, T.C. [California State Univ., Chico, CA (United States)

1998-12-31T23:59:59.000Z

308

Transition from metallic to tunneling-type conductance in metal-metal and normal-metal–superconductor point contacts  

Science Journals Connector (OSTI)

We have investigated the microshort–to–tunneling crossover in normal-normal (N-N) and normal-metal–superconductor (N-S) point-contact junctions at 4.2 K as the junction conductance (G0) is varied. The microshort (or ‘‘metallic’’) point contact with the dynamic conductance G (V) having a negative derivative with respect to bias V (i.e., ?G/?V0 when G0?3–5 mS. We show that this is the region where the contact radius ? is a few times kF-1 (kF is the Fermi wave vector) and the crossover in the sign of ?G/?V occurs due to electron confinement in a length scale comparable to kF-1. The effect of confinement is to make the electrons crossing the constriction evanescent in nature as the junction size is reduced progressively and the energy for lateral confinement becomes comparable to EF. We argue that in this extreme ballistic regime, the classical Sharvin approach breaks down as quantum effects due to electron confinement takes over. This happens much before ‘‘single-atom’’ contact is reached which signals the onset of vacuum tunneling. As a further test of the electron confinement effects in point contacts, we investigated clean N-S microshorts showing near-ideal Andreev reflection. We find that in N-S junctions, the Andreev reflection (which is a manifestation of superconductivity) gradually vanishes when the contact radius ??0.1? (? is the coherence length) and the energy cost of electron confinement is larger than the superconducting energy gap ?.

H. Srikanth and A. K. Raychaudhuri

1992-12-01T23:59:59.000Z

309

Radiation Induced Nanocrystal Formation in Metallic Glasses  

E-Print Network (OSTI)

The irradiation of metallic glasses to induce nanocrystallization was studied in two metallic glass compositions, Cu50Zr45Ti5 and Zr55Cu30Al10Ni5. Atomic mobility was described using a model based on localized excess free volume due to displace...

Carter, Jesse

2010-01-14T23:59:59.000Z

310

Nanocomposite of graphene and metal oxide materials  

SciTech Connect

Nanocomposite materials comprising a metal oxide bonded to at least one graphene material. The nanocomposite materials exhibit a specific capacity of at least twice that of the metal oxide material without the graphene at a charge/discharge rate greater than about 10C.

Liu, Jun; Aksay, Ilhan A.; Choi, Daiwon; Wang, Donghai; Yang, Zhenguo

2012-09-04T23:59:59.000Z

311

Status of Transuranic Bearing Metallic Fuel Development  

SciTech Connect

This paper summarizes the status of the metallic fuel development under the Advanced Fuel Cycle Initiative (AFCI). The metallic fuel development program includes fuel fabrication, characterization, advanced cladding research, irradiation testing and post-irradiation examination (PIE). The focus of this paper is on the recent irradiation experiments conducted in the Advanced Test Reactor and some PIE results from these tests.

Steve Hayes; Bruce Hilton; Heather MacLean; Debbie Utterbeck; Jon Carmack; Kemal Pasamehmetoglu

2009-09-01T23:59:59.000Z

312

Metallic nanoshells on porphyrin-stabilized emulsions  

DOE Patents (OSTI)

Metal nanostructures formed by photocatalytic interfacial synthesis using a porphyrin-stabilized emulsion template and the method for making the nanostructures. Catalyst-seeded emulsion droplets are employed as templates for hollow-nanoshell growth. The hollow metal nanospheres may be formed with or without inclusions of other materials.

Wang, Haorong; Song, Yujiang; Shelnutt, John A; Medforth, Craig J

2013-10-29T23:59:59.000Z

313

AnnaFrebel! metal-poorstars!  

E-Print Network (OSTI)

-process element pattern!! #12;AnnaFrebel! metal-poorstars! New oscillator strengths of rare earth elements!! · Sneden, Lawler et al. 2009: New Rare Earth Element Abundance Distributions for the Sun and Five r-Process-Rich, Metal-Poor Stars, and Rare Earth Lab Data Summary · Lawler, Sneden et al. 2008: Improved Laboratory

314

THE COORDINATION CHEMISTRY OF METAL SURFACES  

SciTech Connect

In coordinately unsaturated molecular metal complexes, carbon-hydrogen bonds of the peripheral ligands may, if the stereochemistry allows, closely approach a metal center so as to develop a three-center two-electron bond between the carbon, the hydrogen, and the metal atoms, C-H-M. In some instances, the interaction .is followed by a scission of the C-H bond whereby the metal is effectively oxidized and discrete M-H and M-C {sigma} bonds are forrned. This class of metal-hydrogen-carbon interactions and reactions is shown to be a common phenomenon in metal surface chemistry. Ultra high vacuum studies of nickel and platinum with simple organic molecules like olefins, and arenes are described. These surface chemistry studies were done as a function of surface crystallography and surface composition. The discussion is largely limited to the chemistry of methyl isocyanide, acetonitrile, benzene and toluene. Molecular orbital calculations are presented that support the experimental identification of the importance of C-H-M metal bonding for metal surfaces.

Muetterties, Earl L.

1980-10-01T23:59:59.000Z

315

Remote Opening and Sealing of Metal Tubes  

Science Journals Connector (OSTI)

``One?shot'' methods of opening and sealing metal tubes are described. These methods were developed for taking high altitude atmospheric samples in metal bottles carried aloft by rockets and are performed by pyrotechnic means. The sealing is done by cold welding.

L. T. Loh; H. W. Neill; M. H. Nichols; E. A. Wenzel

1952-01-01T23:59:59.000Z

316

Route to transition metal carbide nanoparticles through cyanamide and metal oxides  

SciTech Connect

We have designed an efficient route to the synthesis of transition metal carbide nanoparticles starting from an organic reagent cyanamide and transition metal oxides. Four technologically important metal carbide nanoparticles such as tungsten carbide, niobium carbide, tantalum carbide and vanadium carbide were synthesized successfully at moderate temperatures. It is found that cyanamide is an efficient carburization reagent and that the metal oxides are completely transmitted into the corresponding carbide nanoparticles. A possible mechanism is proposed to explain the results of the reaction between cyanamide and the metal oxides.

Li, P.G. [Department of Physics, Center for Optoelectronics Materials and Devices, Zhejiang Sci-Tech University, Xiasha College Park, Hangzhou 310018 (China)], E-mail: peigangiphy@yahoo.com.cn; Lei, M.; Tang, W.H. [Department of Physics, Center for Optoelectronics Materials and Devices, Zhejiang Sci-Tech University, Xiasha College Park, Hangzhou 310018 (China)

2008-12-01T23:59:59.000Z

317

E-Print Network 3.0 - alkali metal hydrides Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Hf for selected alkali metal hydrides, alkaline earth metal hydrides, transition metal hydrides... of binary hydrides based on alkali metals, alkaline earth ... Source:...

318

Visualizing Brain Metals in Health and Disease  

NLE Websites -- All DOE Office Websites (Extended Search)

Visualizing Brain Metals in Health and Visualizing Brain Metals in Health and Disease figure 1 Fig. 1. Rapid-scanning x-ray fluorescence mapping ex perimental setup. Synchrotron x-rays at 11 keV passed through a 50 µm aperture (Ap). The beam intensity was monitored with a N2-filled ion chamber (I0). The brain slice was mounted vertically on a motorized stage (St) at 45° to the incident x-ray beam and raster scanned in the beam. A 13-element Ge detector (Ge) was positioned at a 90° angle to the beam. We all require iron, copper and zinc for normal brain function but metal metabolism becomes dysregulated in a variety of neurodegenerative diseases. Metals accumulate in Alzheimer's dementia and Parkinson's disease and are deficient in Menkes disease. Whether excess metals appear as a cause or a

319

Rare Earth Metals and Alloys | Ames Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Mpc » Rare Earth Metals and Alloys Mpc » Rare Earth Metals and Alloys Rare Earth Metals and Alloys Terbium (Tb) and Cerium (Ce) phosphors in your computer screen allow you to see GREEN. Europium (Eu) is the source of the RED light and BLUE emitted by our display. The Ames Laboratory has been actively involved in the preparation of very pure rare earth metals since the early 1940's when Dr. Frank H. Spedding and his group of pioneers developed the ion-exchange process, a technique that separates the "fraternal fifteen" plus yttrium and scandium. As a result of this and subsequent work, high-purity oxides are available from which high-purity rare earth metals can be prepared. In most cases, the rare earth oxides are first converted to their respective fluorides and are then reduced metallothermicaly on a kilogram

320

Reactive cluster model of metallic glasses  

SciTech Connect

Though discovered more than a half century ago metallic glasses remain a scientific enigma. Unlike crystalline metals, characterized by short, medium, and long-range order, in metallic glasses short and medium-range order persist, though long-range order is absent. This fact has prompted research to develop structural descriptions of metallic glasses. Among these are cluster-based models that attribute amorphous structure to the existence of clusters that are incommensurate with crystalline periodicity. Not addressed, however, are the chemical factors stabilizing these clusters and promoting their interconnections. We have found that glass formers are characterized by a rich cluster chemistry that above the glass transformation temperature promotes exchange as well as static and vibronic sharing of atoms between clusters. The vibronic mechanism induces correlated motions between neighboring clusters and we hypothesize that the distance over which these motions are correlated mediates metallic glass stability and influences critical cooling rates.

Jones, Travis E. [Molecular Theory Group, Colorado School of Mines, Golden, Colorado 80401 (United States) [Molecular Theory Group, Colorado School of Mines, Golden, Colorado 80401 (United States); School of Physics, The University of Sydney, Sydney, New South Wales 2006 (Australia); Miorelli, Jonathan; Eberhart, Mark E. [Molecular Theory Group, Colorado School of Mines, Golden, Colorado 80401 (United States)] [Molecular Theory Group, Colorado School of Mines, Golden, Colorado 80401 (United States)

2014-02-28T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Extraction of trace metals from fly ash  

DOE Patents (OSTI)

A process is described for recovering silver, gallium and/or other trace metals from a fine grained industrial fly ash associated with a process for producing phosphorous. The fly ash has a silicate base and contains surface deposits of the trace metals as oxides, chlorides or the like. The process is carried out by contacting the fly ash with AlCl/sub 3/ in an alkali halide melt to react the trace metals with the AlCl/sub 3/ to form compositions soluble in the melt and a residue containing the silicate and aluminum oxide or other aluminum precipitate, and separating the desired trace metal or metals from the melt by electrolysis or other separation techniques.

Blander, M.; Wai, C.M.; Nagy, Z.

1983-08-15T23:59:59.000Z

322

Studies on metal-dielectric plasmonic structures.  

SciTech Connect

The interaction of light with nanostructured metal leads to a number of fascinating phenomena, including plasmon oscillations that can be harnessed for a variety of cutting-edge applications. Plasmon oscillation modes are the collective oscillation of free electrons in metals under incident light. Previously, surface plasmon modes have been used for communication, sensing, nonlinear optics and novel physics studies. In this report, we describe the scientific research completed on metal-dielectric plasmonic films accomplished during a multi-year Purdue Excellence in Science and Engineering Graduate Fellowship sponsored by Sandia National Laboratories. A variety of plasmonic structures, from random 2D metal-dielectric films to 3D composite metal-dielectric films, have been studied in this research for applications such as surface-enhanced Raman sensing, tunable superlenses with resolutions beyond the diffraction limit, enhanced molecular absorption, infrared obscurants, and other real-world applications.

Chettiar, Uday K. (Purdue University, West Lafayette, IN); Liu, Zhengtong (Purdue University, West Lafayette, IN); Thoreson, Mark D. (Purdue University, West Lafayette, IN); Shalaev, Vladimir M. (Purdue University, West Lafayette, IN); Drachev, Vladimir P. (Purdue University, West Lafayette, IN); Pack, Michael Vern; Kildishev, Alexander V. (Purdue University, West Lafayette, IN); Nyga, Piotr (Purdue University, West Lafayette, IN)

2010-01-01T23:59:59.000Z

323

Metal-to-ceramic attachment device  

SciTech Connect

A metal-to-ceramic fastening device is disclosed for securing a metal member to a ceramic member with respective confronting surfaces thereon clamped together, comprising a threaded bolt adapted to extend through a bolt hole in the metal member and into an aligned opening in the ceramic member, a rod nut threadedly receiving the bolt and adapted to span the opening in the ceramic member, and a pressure limiting member received on the bolt between the nut and the confronting surface of the metal member for limiting the movement of the nut toward the metal member when the bolt is tightened, so as to limit the pressure applied by the nut to the ceramic member to avoid damage thereto. The fastening device also prevents damage to the ceramic member due to thermal stresses. The pressure limiting member may have a shallow dish-shaped depression facing the rod nut to assist in accommodating thermal stresses.

Pavelka, Edwin A. (Bartlesville, OK); Grindstaff, Quirinus G. (Bartlesville, OK); Scheppele, Stuart E. (Bartlesville, OK)

1985-01-01T23:59:59.000Z

324

Sewage sludge dewatering using flowing liquid metals  

DOE Patents (OSTI)

A method and apparatus for reducing the moisture content of a moist sewage sludge having a moisture content of about 50% to 80% and formed of small cellular micro-organism bodies having internally confined water is provided. A hot liquid metal is circulated in a circulation loop and the moist sewage sludge is injected in the circulation loop under conditions of temperature and pressure such that the confined water vaporizes and ruptures the cellular bodies. The vapor produced, the dried sludge, and the liquid metal are then separated. Preferably, the moist sewage sludge is injected into the hot liquid metal adjacent the upstream side of a venturi which serves to thoroughly mix the hot liquid metal and the moist sewage sludge. The venturi and the drying zone after the venturi are preferably vertically oriented. The dried sewage sludge recovered is available as a fuel and is preferably used for heating the hot liquid metal.

Carlson, Larry W. (Oswego, IL)

1986-01-01T23:59:59.000Z

325

Extraction of trace metals from fly ash  

DOE Patents (OSTI)

A process for recovering silver, gallium and/or other trace metals from a fine grained industrial fly ash associated with a process for producing phosphorous, the fly ash having a silicate base and containing surface deposits of the trace metals as oxides, chlorides or the like, with the process being carried out by contacting the fly ash with AlCl.sub.3 in an alkali halide melt to react the trace metals with the AlCl.sub.3 to form compositions soluble in the melt and a residue containing the silicate and aluminum oxide or other aluminum precipitate, and separating the desired trace metal or metals from the melt by electrolysis or other separation techniques.

Blander, Milton (Palos Park, IL); Wai, Chien M. (Moscow, ID); Nagy, Zoltan (Woodridge, IL)

1984-01-01T23:59:59.000Z

326

Lithium metal oxide electrodes for lithium batteries  

DOE Patents (OSTI)

An uncycled electrode for a non-aqueous lithium electrochemical cell including a lithium metal oxide having the formula Li.sub.(2+2x)/(2+x)M'.sub.2x/(2+x)M.sub.(2-2x)/(2+x)O.sub.2-.delta., in which 0.ltoreq.x<1 and .delta. is less than 0.2, and in which M is a non-lithium metal ion with an average trivalent oxidation state selected from two or more of the first row transition metals or lighter metal elements in the periodic table, and M' is one or more ions with an average tetravalent oxidation state selected from the first and second row transition metal elements and Sn. Methods of preconditioning the electrodes are disclosed as are electrochemical cells and batteries containing the electrodes.

Thackeray, Michael M. (Naperville, IL); Kim, Jeom-Soo (Naperville, IL); Johnson, Christopher S. (Naperville, IL)

2008-01-01T23:59:59.000Z

327

Metals Production Requirements for Rapid Photovoltaics Deployment  

E-Print Network (OSTI)

If global photovoltaics (PV) deployment grows rapidly, the required input materials need to be supplied at an increasing rate. In this paper, we quantify the effect of PV deployment levels on the scale of metals production. For example, we find that if cadmium telluride {copper indium gallium diselenide} PV accounts for more than 3% {10%} of electricity generation by 2030, the required growth rates for the production of indium and tellurium would exceed historically-observed production growth rates for a large set of metals. In contrast, even if crystalline silicon PV supplies all electricity in 2030, the required silicon production growth rate would fall within the historical range. More generally, this paper highlights possible constraints to the rate of scaling up metals production for some PV technologies, and outlines an approach to assessing projected metals growth requirements against an ensemble of past growth rates from across the metals production sector. The framework developed in this paper may be...

Kavlak, Goksin; Jaffe, Robert L; Trancik, Jessika E

2015-01-01T23:59:59.000Z

328

STAMP: statistical analysis of taxonomic and functional profiles  

Science Journals Connector (OSTI)

......package that provides statistical hypothesis tests and exploratory plots for analysing taxonomic and functional profiles. It supports tests for comparing pairs of samples or samples...assessment of the biological relevancy of test results. A user-friendly graphical interface......

Donovan H. Parks; Gene W. Tyson; Philip Hugenholtz; Robert G. Beiko

2014-11-01T23:59:59.000Z

329

Democratic Congress Begins to Put Its Stamp on Science  

Science Journals Connector (OSTI)

...extra funds for earmarks and climate studies. That would amount to a 16% boost. American Physical Society lobbyist Michael Lubell says he “thought we had a big problem last fall” after the Democratic triumph because of what he calls “Democratic...

Eli Kintisch

2007-06-29T23:59:59.000Z

330

Modelling and Hazard Analysis for Contaminated Sediments Using Stamp Model  

E-Print Network (OSTI)

to characterise the risks associated with Novosol®, an innovative remediation process. Risk analysis is carried-Antipolis Cedex, France karim.hardy@mines-paristech.fr Processes for remediation (removal of pollution

Boyer, Edmond

331

Unifying Behavior Based Control Design and Hybrid Stability Theory for AUV Application  

E-Print Network (OSTI)

Ordinance Disposal (PMS EOD) and Explosive iv OrdnanceOrdinance Disposal (PMS EOD) and Explosive Ordnance Disposal

Djapic, Vladimir

2009-01-01T23:59:59.000Z

332

On improving communication in emergency response at network and organizational levels  

E-Print Network (OSTI)

including HAZMAT, SWAT, EOD (Explosive Ordnance Disposal),Explosive Ordnance Disposal (EOD:SWAT and bomb squad),

Dilmaghani, Raheleh B.

2010-01-01T23:59:59.000Z

333

Metallic coatings on silicon substrates, and methods of forming metallic coatings on silicon substrates  

DOE Patents (OSTI)

The invention includes methods of forming a metallic coating on a substrate which contains silicon. A metallic glass layer is formed over a silicon surface of the substrate. The invention includes methods of protecting a silicon substrate. The substrate is provided within a deposition chamber along with a deposition target. Material from the deposition target is deposited over at least a portion of the silicon substrate to form a protective layer or structure which contains metallic glass. The metallic glass comprises iron and one or more of B, Si, P and C. The invention includes structures which have a substrate containing silicon and a metallic layer over the substrate. The metallic layer contains less than or equal to about 2 weight % carbon and has a hardness of at least 9.2 GPa. The metallic layer can have an amorphous microstructure or can be devitrified to have a nanocrystalline microstructure.

Branagan, Daniel J. (Idaho Falls, ID); Hyde, Timothy A. (Idaho Falls, ID); Fincke, James R. (Los Alamos, NM)

2008-03-11T23:59:59.000Z

334

Metal-insulator transition in expanded alkali-metal fluids and alkali-metal—rare-gas films  

Science Journals Connector (OSTI)

We have developed a theoretical model for expanded alkali metals and alkali-metal—rare-gas films that is based on a physically realistic picture of the atomic-scale structure of these materials. It emphasizes the disorder in the systems, in particular the random atomic coordination number. Using this model we have calculated the density- and the energy-dependent conductivity as a function of the mean alkali-metal atomic coordination number. Although the theory contains only two parameters, both of which are fixed by the properties of pure materials at normal temperatures, we have been able to explain results measured over a temprature range from 4.2 to >2000 K in a variety of different alkali-metal systems. Conductivity and magnetic-susceptibility measurements, in particular, have been considered in some detail. In addition, the theory provides insight into the nature and location of the metal-insulator transition, the nature of the critical point for the alkali metals, and the thermal instability of the alkali-metal—rare-gas films.

Judy R. Franz

1984-02-15T23:59:59.000Z

335

Thermodynamics and kinetics of ceramic/metal interfacial interactions  

E-Print Network (OSTI)

Ceramic/metal interfaces occur in a great number of important applications, such as ceramic/metal composites, microelectronics packaging, ceramic/metal seals, and so forth. Understanding the formation and evolution of such ...

Arróyave, Raymundo, 1975-

2004-01-01T23:59:59.000Z

336

Engineering of microorganisms towards recovery of rare metal ions  

Science Journals Connector (OSTI)

The bioadsorption of metal ions using microorganisms is an attractive technology for the recovery of rare metal ions as well as removal of toxic heavy metal ions from aqueous solution. In initial attempts, microo...

Kouichi Kuroda; Mitsuyoshi Ueda

2010-06-01T23:59:59.000Z

337

Hydrogen Release Studies of Alkali Metal Amidoboranes. | EMSL  

NLE Websites -- All DOE Office Websites (Extended Search)

Release Studies of Alkali Metal Amidoboranes. Hydrogen Release Studies of Alkali Metal Amidoboranes. Abstract: A series of metal amido boranes LiNH2BH3 (LAB), NaNH2BH3 (SAB),...

338

Dinuclear Metalloradicals Featuring Unsupported Metal-Metal Bonds  

SciTech Connect

Unlike the very labile, unobservable radical cations [{l_brace}CpM(CO){sub 3}{r_brace}{sub 2}]{sup {sm_bullet}+} (M = W, Mo), derivatives [{l_brace}CpM(CO){sub 2}(PMe{sub 3}){r_brace}{sub 2}]{sup {sm_bullet}+} are stable enough to be isolated and characterized. Experimental and theoretical studies show that the shortened M-M bonds are of order 1 1/2, and that they are not supported by bridging ligands. The unpaired electron is fully delocalized, with a spin density of ca. 45% on each metal atom. We thank the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Biosciences and Geosciences for support of this work. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. The EPR and computational studies were performed using EMSL, a national scientific user facility sponsored by the DOE's Office of Biological and Environmental Research and located at PNNL. We thank Dr. Charles Windisch for access to his UV-Vis-NIR spectrometer.

van der Eide, Edwin F.; Yang, Ping; Walter, Eric D.; Liu, Tianbiao L.; Bullock, R. Morris

2012-08-13T23:59:59.000Z

339

Ultrasensitive Voltammetric Detection of Trace Heavy Metal Ions...  

NLE Websites -- All DOE Office Websites (Extended Search)

Voltammetric Detection of Trace Heavy Metal Ions Using Carbon Nanotube Nanoelectrode Array. Ultrasensitive Voltammetric Detection of Trace Heavy Metal Ions Using Carbon Nanotube...

340

High Metal Removal Rate Process for Machining Difficult Materials...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High Metal Removal Rate Process for Machining Difficult Materials High Metal Removal Rate Process for Machining Difficult Materials highmetalremovalprocessfactsheet.pdf More...

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Synthesis, Structure, and Metalation of Two New Highly Porous...  

NLE Websites -- All DOE Office Websites (Extended Search)

Synthesis, Structure, and Metalation of Two New Highly Porous Zirconium Metal-Organic Frameworks Previous Next List William Morris, Boris Volosskiy, Selcuk Demir, Felipe Gndara,...

342

Stepwise Synthesis of Robust Metal-Organic Frameworks via Postsyntheti...  

NLE Websites -- All DOE Office Websites (Extended Search)

Stepwise Synthesis of Robust Metal-Organic Frameworks via Postsynthetic Metathesis and Oxidation of Metal Nodes in a Single-Crystal to Single-Crystal Transformation Previous Next...

343

Apoferritin-Templated Synthesis of Encoded Metallic Phosphate...  

NLE Websites -- All DOE Office Websites (Extended Search)

Apoferritin-Templated Synthesis of Encoded Metallic Phosphate Nanoparticle Tags. Apoferritin-Templated Synthesis of Encoded Metallic Phosphate Nanoparticle Tags. Abstract: Encoded...

344

Heavy metals removal from oil sludge using ion exchange textiles.  

E-Print Network (OSTI)

??In this research, ion exchange textiles were used for the first time for the removal of heavy metals from oil sludge. The target metals which… (more)

Muslat, Ziyad

2005-01-01T23:59:59.000Z

345

Diameter-Refined Metallic Carbon Nanotubes as Optically Tunable...  

NLE Websites -- All DOE Office Websites (Extended Search)

Diameter-Refined Metallic Carbon Nanotubes as Optically Tunable Transparent Conductors Home > Research > ANSER Research Highlights > Diameter-Refined Metallic Carbon Nanotubes as...

346

Hydrogenated Graphene Nanoflakes: Semiconductor to Half-Metal...  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogenated Graphene Nanoflakes: Semiconductor to Half-Metal Transition and Remarkable Large Magnetism. Hydrogenated Graphene Nanoflakes: Semiconductor to Half-Metal Transition...

347

Cobalt discovery replaces precious metals as industrial catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

replaces precious metals Cobalt discovery replaces precious metals as industrial catalyst Cobalt holds promise as an industrial catalyst with potential applications in such...

348

Cobalt discovery replaces precious metals as industrial catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Replaces Precious Metals Cobalt discovery replaces precious metals as industrial catalyst Cobalt holds promise as an industrial catalyst with potential applications in such...

349

Design Potential of Metal Foil Substrates for Optimized DOC Performanc...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Design Potential of Metal Foil Substrates for Optimized DOC Performance Design Potential of Metal Foil Substrates for Optimized DOC Performance Poster presentation at the 2007...

350

ITP Metal Casting: Corrosion Testing Practices - High Alloy Corrosion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Metal Casting: Corrosion Testing Practices - High Alloy Corrosion Program ITP Metal Casting: Corrosion Testing Practices - High Alloy Corrosion Program lehighfs.pdf More Documents...

351

Graphene/metal Oxide Nanocomposites for Li-ion Batteries  

Science Journals Connector (OSTI)

Our work focuses on preparing the graphene/metal oxide nanocomposites by facile methold and exploring the graphene/metal oxide composites with unique structural or compositions for...

Liang, Junfei; Li, Lidong; Guo, Lin

352

Journal Article: Graphene physics and insulator-metal transition...  

NLE Websites -- All DOE Office Websites (Extended Search)

Graphene physics and insulator-metal transition in compressed hydrogen Citation Details Title: Graphene physics and insulator-metal transition in compressed hydrogen Authors:...

353

ITP Metal Casting: Advanced Melting Technologies: Energy Saving...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Melting Technologies: Energy Saving Concepts and Opportunities for the Metal Casting Industry ITP Metal Casting: Advanced Melting Technologies: Energy Saving Concepts and...

354

Reliability Tools for Resonance Inspection of Light Metal Castings...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

for Light Metal Castings FY 2009 Progress Report for Lightweighting Materials - 10. Nondestructive Evaluation NDE 701: Enhanced Resonance Inspection for Light Metal Castings...

355

Remediation of Abandoned Metal Mine Drainage using Dealginated Seaweed .  

E-Print Network (OSTI)

??This thesis develops and demonstrates an innovative method for adsorbing metals from metal mine drainage in mid-Wales and northern Italy using dealginated seaweed (DS) as… (more)

Hartley, Suzanne

2008-01-01T23:59:59.000Z

356

Covalency in Metal-Oxygen Multiple Bonds Evaluated Using Oxygen...  

NLE Websites -- All DOE Office Websites (Extended Search)

Covalency in Metal-Oxygen Multiple Bonds Evaluated Using Oxygen K-edge Spectroscopy and Electronic Structure Theory . Covalency in Metal-Oxygen Multiple Bonds Evaluated Using...

357

Polyamorphism in a Metallic Glass | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

2000 | 1998 | Subscribe to APS Science Highlights rss feed Polyamorphism in a Metallic Glass MARCH 14, 2007 Bookmark and Share Structural modeling of the metallic glass: (a) A...

358

Metal and Glass Manufacturers Reduce Costs by Increasing Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Metal and Glass Manufacturers Reduce Costs by Increasing Energy Efficiency in Process Heating Systems Metal and Glass Manufacturers Reduce Costs by Increasing Energy Efficiency in...

359

Dissolution of inert gas in a metal alloy  

DOE Patents (OSTI)

A metal powder is produced by inert gas atomization processes. The atomizon process is regulated to provide a preselected level of inert gas alloyed in the metal.

Flinn, John E. (Idaho Falls, ID); Korth, Gary E. (Blackfoot, ID); Wright, Richard N. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Loop, Richard B. (Idaho Falls, ID)

1988-01-01T23:59:59.000Z

360

NDE 701: Enhanced Resonance Inspection for Light Metal Castings...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NDE 701: Enhanced Resonance Inspection for Light Metal Castings NDE 701: Enhanced Resonance Inspection for Light Metal Castings Presentation from the U.S. DOE Office of Vehicle...

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Understanding Atom Probe Tomography of Oxide-Supported Metal...  

NLE Websites -- All DOE Office Websites (Extended Search)

Atom Probe Tomography of Oxide-Supported Metal Nanoparticles by Correlation with Atomic Resolution Electron Understanding Atom Probe Tomography of Oxide-Supported Metal...

362

KINETIC CONDENSATION AND EVAPORATION OF METALLIC IRON AND IMPLICATIONS FOR METALLIC IRON DUST FORMATION  

SciTech Connect

Metallic iron is one of the most abundant condensing materials in systems of solar abundance. Because metallic iron is responsible for the continuum opacity of dust particles, it has a large contribution to the thermal structure of circumstellar environments and hence to dust evolution itself. In order to understand the formation processes of metallic iron in circumstellar environments, condensation and evaporation kinetics of metallic iron were studied experimentally. Metallic iron condenses at the maximum rate with the condensation coefficient (a parameter ranging from 0 to 1 to represent kinetic hindrance for surface reaction) of unity under high supersaturation conditions, and evaporates nearly ideally (evaporation coefficient of unity) in vacuum. On the other hand, evaporation of metallic iron takes place with more kinetic hindrance in the presence of metallic iron vapor. It is also found that metallic iron atoms nucleate heterogeneously on Al{sub 2}O{sub 3}. Metallic iron does not necessarily condense homogeneously in circumstellar environments, but might condense through heterogeneous nucleation on pre-existing dust. Metallic iron formation proceeds with little kinetic hindrance for highly unequilibrated conditions, but the effects of kinetic hindrance may appear for evaporation and condensation occurring near equilibrium with a timescale of months to years in protoplanetary disks.

Tachibana, Shogo; Nagahara, Hiroko; Ozawa, Kazuhito; Ikeda, Youhei; Nomura, Ryuichi; Tatsumi, Keisuke; Joh, Yui, E-mail: tachi@eps.s.u-tokyo.ac.jp [Department of Earth and Planetary Science, University of Tokyo, 7-3-1 Hongo, Tokyo 113-0033 (Japan)

2011-07-20T23:59:59.000Z

363

Nano-Structured Nobel Metal Catalysts  

NLE Websites -- All DOE Office Websites (Extended Search)

Nobel Metal Catalysts Nobel Metal Catalysts for Hydrocarbon Reforming Opportunity Research is active on the patent pending technology, titled "Nano- Structured Nobel Metal Catalysts Based on Hexametallate Architecture for the Reforming of Hydrocarbon Fuels." This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy's National Energy Technology Laboratory. Overview Methods for generating synthesis gas from hydrocarbon feedstocks routinely involve the use of a catalyst-a material that speeds up the reaction, but itself is not consumed-to make this process economically feasible. Sulfur, higher hydrocarbons, and olefins present a major technical challenge since these components can deactivate conventional

364

Tailoring graphene with metals on top  

Science Journals Connector (OSTI)

We study the effects of metallic doping on the electronic properties of graphene using density functional theory in the local density approximation in the presence of a local charging energy. The electronic properties are sensitive to whether graphene is doped with alkali or transition metals. We estimate the charge transfer from a single layer of potassium on top of graphene in terms of the local charging energy of the graphene sheet. The coating of graphene with a nonmagnetic layer of palladium, on the other hand, can lead to a magnetic instability in coated graphene due to the hybridization between the transition metal and the carbon orbitals.

B. Uchoa; C.-Y. Lin; A. H. Castro Neto

2008-01-17T23:59:59.000Z

365

Process for removing metals from water  

DOE Patents (OSTI)

A process for removing metals from water including the steps of prefiltering solids from the water, adjusting the pH to between about 2 and 3, reducing the amount of dissolved oxygen in the water, increasing the pH to between about 6 and 8, adding water-soluble sulfide to precipitate insoluble sulfide- and hydroxide-forming metals, adding a containing floc, and postfiltering the resultant solution. The postfiltered solution may optionally be eluted through an ion exchange resin to remove residual metal ions. 2 tabs.

Napier, J.M.; Hancher, C.M.; Hackett, G.D.

1987-06-29T23:59:59.000Z

366

Biofuels production from hydrotreating of vegetable oil using supported noble metals, and transition metal carbide and nitride.  

E-Print Network (OSTI)

?? The focus of this research is to prepare non-sulfided hydrotreating catalysts, supported noble metal and transition metal carbide/ nitride, and evaluate their hydrocracking activities… (more)

Wang, Huali

2012-01-01T23:59:59.000Z

367

DOE Science Showcase - Rare Earth Metal Research from DOE Databases |  

Office of Scientific and Technical Information (OSTI)

Rare Earth Metal Research from DOE Databases Rare Earth Metal Research from DOE Databases Information Bridge Energy Citations Database Highlighted documents of Rare Earth Metal research in DOE databases Information Bridge - Corrosion-resistant metal surfaces DOE R&D Project Summaries - Structural and magnetic studies on heavy rare earth metals at high pressures using designer diamonds Energy Citations Database - Intermultiplet transitions in rare-earth metals DOE Green Energy - LaNi.sub.5 is-based metal hydride electrode in Ni-MH rechargeable cells Science.gov - H.R.4866 - Rare Earths Supply-Chain Technology and Resources Transformation Act of 2010 WorldWideScience.org - China produces most of the world's rare earth metals DOepatents - Recycling of rare earth metals from rare earth-transition metal alloy scrap by liquid metal extraction

368

Uranium Metal: Potential for Discovering Commercial Uses  

NLE Websites -- All DOE Office Websites (Extended Search)

Uranium Metal Uranium Metal Potential for Discovering Commercial Uses Steven M. Baker, Ph.D. Knoxville Tn 5 August 1998 Summary Uranium Metal is a Valuable Resource 3 Large Inventory of "Depleted Uranium" 3 Need Commercial Uses for Inventory  Avoid Disposal Cost  Real Added Value to Society 3 Uranium Metal Has Valuable Properties  Density  Strength 3 Market will Come if Story is Told Background The Nature of Uranium Background 3 Natural Uranium: 99.3% U238; 0.7% U 235 3 U235 Fissile  Nuclear Weapons  Nuclear Reactors 3 U238 Fertile  Neutron Irradiation of U238 Produces Pu239  Neutrons Come From U235 Fission  Pu239 is Fissile (Weapons, Reactors, etc.) Post World War II Legacy Background 3 "Enriched" Uranium Product  Weapons Program 

369

Metallic Power Inc | Open Energy Information  

Open Energy Info (EERE)

Metallic Power Inc Metallic Power Inc Jump to: navigation, search Name Metallic Power Inc Place Carlsbad, California Zip CA 92009- Product Metallic Power, which closed down in September 2004, was focused on remote and distributed power solutions based on zinc-air fuel cell technology. Coordinates 31.60396°, -100.641609° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":31.60396,"lon":-100.641609,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

370

Automated visual inspection of rolled metal surfaces  

Science Journals Connector (OSTI)

A prototype for an automated visual on-line metal strip inspection system is described. The system is capable of both detecting and classifying surface defects in copper alloy strips, and it has been installed...

Timo Piironen; Olli Silven; Matti Pietikäinen…

1990-01-01T23:59:59.000Z

371

Photoinduced Electron Transport of Macromolecular Metal Complexes  

Science Journals Connector (OSTI)

Electron transport as an important process for macromolecule-metal complexes (MMC) to function as active centers in catalysis is discussed in Chap. 4.4 and 4.5. This behavior is directly related to energy leve...

Masao Kaneko; Dieter Wöhrle

1996-01-01T23:59:59.000Z

372

Radiation Damage in Nanostructured Metallic Films  

E-Print Network (OSTI)

with favorable microstructures and to investigate their response to radiation. The goals of this thesis are to study the radiation responses of several nanostructured metallic thin film systems, including Ag/Ni multilayers, nanotwinned Ag and nanocrystalline Fe...

Yu, Kaiyuan

2013-04-15T23:59:59.000Z

373

Trace metal fronts in European shelf waters  

Science Journals Connector (OSTI)

... dissolved Cd, Cu, and Mn values reported there5. The metal analyses were made by flameless atomic absorption spec-trometry using the pre-concentration methods described elsewhere6'7. Detection limits ...

K. Kremling

1983-05-19T23:59:59.000Z

374

Liquid metal cooled divertor for ARIES  

SciTech Connect

A liquid metal, Ga-cooled divertor design was completed for the double null ARIES-II divertor design. The design analysis indicated a surface heat flux removal capability of up to 15 MW/m{sup 2}, and its relative easy maintenance. Design issues of configuration, thermal hydraulics, thermal stresses, liquid metal loop and safety effects were evaluated. For coolant flow control, it was found that it is necessary to use some part of the blanket cooling ducts for the draining of liquid metal from the top divertor. In order to minimize the inventory of Ga, it was recommended that the liquid metal loop equipment should be located as close to the torus as possible. More detailed analysis of transient conditions especially under accident conditions was identified as an issue that will need to be addressed.

Muraviev, E. [Gosudarstvennyj Komitet po Ispol`zovaniyu Atomnoj Ehnergii SSSR, Moscow (Russian Federation). Inst. Atomnoj Ehnergii

1995-01-01T23:59:59.000Z

375

Oil, Gas, and Metallic Minerals (Iowa)  

Energy.gov (U.S. Department of Energy (DOE))

Operators of oil, gas, and metallic mineral exploration and production operations are required to obtain a drilling permit from the Iowa Department of Natural Resources and file specific forms with...

376

Electron Dynamics in Metallic Nanoparticles M. Aeschlimann  

E-Print Network (OSTI)

nanoparticles are discussed in the light of the results of line width measurements and femtosecond pump...............................................................................................................3 II. ADSORPTION OF LIGHT IN METALLIC NANOPARTICLES...................................4 A. General...............................................18 C. Heat transfer between the nanoparticles and the support

Bauer, Michael

377

Magnetism in metal-organic capsules  

SciTech Connect

Nickel and cobalt seamed metal-organic capsules have been isolated and studied using structural, magnetic and computational approaches. Antiferromagnetic exchange in the Ni capsule results from coordination environments enforced by the capsule framework.

Atwood, Jerry L.; Brechin, Euan K; Dalgarno, Scott J.; Inglis, Ross; Jones, Leigh F.; Mossine, Andrew; Paterson, Martin J.; Power, Nicholas P.; Teat, Simon J.

2010-01-07T23:59:59.000Z

378

Diamagnetic muon yields of metal acetylacetonates  

Science Journals Connector (OSTI)

Diamagnetic muon yields /PD.../ in various metal acetylacetonates were measured at room temperature by the muon spin rotation technique. We have found a...D between complexes of typical elements and those of tran...

M. K. Kubo; Y. Sakai; T. Tominaga…

1989-05-02T23:59:59.000Z

379

On the metallicity of some carbon nanotubes .  

E-Print Network (OSTI)

??Some zigzag and all armchair single-walled carbon nanotubes are believed to behave as metals. However, recent experimental results suggest that only armchair single-walled carbon nanotubes… (more)

Gómez Jeria, Juan Sebastián

2007-01-01T23:59:59.000Z

380

High Transparency of Classically Opaque Metallic Films  

Science Journals Connector (OSTI)

It is demonstrated, both theoretically and experimentally, that a classically opaque metallic film can appear highly transparent when the conditions are established for the incident electromagnetic wave to excite coupled surface modes on both sides of the film.

R. Dragila; B. Luther-Davies; S. Vukovic

1985-09-02T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Directed light fabrication of refractory metals  

SciTech Connect

Directed Light Fabrication (DLF) is a metal, rapid fabrication process that fuses metal powders to full density into a solid replica of a computer modeled component. It has been shown feasible for forming nearly any metal and also intermetallics to near net shape with a single process. DLF of refractory pure metals is feasible, bypassing the extensive series of conventional processing steps used for processing these high melting point materials. Tungsten, tantalum, and rhenium were processed and show a continuous resolidified microstructure. Porosity was a problem for the tantalum and rhenium powders produced by chemical reduction processes but not for the tungsten powder spherodized in a plasma arc. Chemical analysis of powder compared to the DLF deposit showed reductions in carbon, oxygen and hydrogen, indicating that process parameters may also be optimized for evolution of residual gases in the deposits.

Lewis, G.K.; Thoma, D.J.; Nemec, R.B.; Milewski, J.O. [Los Alamos National Lab., NM (United States). Materials Science and Technology Div.

1997-11-01T23:59:59.000Z

382

3-D Metals | Open Energy Information  

Open Energy Info (EERE)

Metals Metals Jump to: navigation, search Name 3-D Metals Facility 3-D Metals Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Location Valley City OH Coordinates 41.2481362°, -81.88305616° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.2481362,"lon":-81.88305616,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

383

Corrosion resistant amorphous metals and methods of forming corrosion resistant amorphous metals  

DOE Patents (OSTI)

A system for coating a surface comprises providing a source of amorphous metal, providing ceramic particles, and applying the amorphous metal and the ceramic particles to the surface by a spray. The coating comprises a composite material made of amorphous metal that contains one or more of the following elements in the specified range of composition: yttrium (.gtoreq.1 atomic %), chromium (14 to 18 atomic %), molybdenum (.gtoreq.7 atomic %), tungsten (.gtoreq.1 atomic %), boron (.ltoreq.5 atomic %), or carbon (.gtoreq.4 atomic %).

Farmer, Joseph C.; Wong, Frank M.G.; Haslam, Jeffery J.; Yang, Nancy; Lavernia, Enrique J.; Blue, Craig A.; Graeve, Olivia A.; Bayles, Robert; Perepezko, John H.; Kaufman, Larry; Schoenung, Julie; Ajdelsztajn, Leo

2014-07-15T23:59:59.000Z

384

Tokamak with liquid metal toroidal field coil  

DOE Patents (OSTI)

Tokamak apparatus includes a pressure vessel for defining a reservoir and confining liquid therein. A toroidal liner disposed within the pressure vessel defines a toroidal space within the liner. Liquid metal fills the reservoir outside said liner. Electric current is passed through the liquid metal over a conductive path linking the toroidal space to produce a toroidal magnetic field within the toroidal space about the major axis thereof. Toroidal plasma is developed within the toroidal space about the major axis thereof.

Ohkawa, Tihiro (La Jolla, CA); Schaffer, Michael J. (San Diego, CA)

1981-01-01T23:59:59.000Z

385

Atomization of metal (Materials Preparation Center)  

SciTech Connect

Atomization of metal requires high pressure gas and specialized chambers for cooling and collecting the powders without contamination. The critical step for morphological control is the impingement of the gas on the melt stream. The video is a color video of a liquid metal stream being atomized by high pressure gas. This material was cast at the Ames Laboratorys Materials Preparation Center http://www.mpc.ameslab.gov WARNING - AUDIO IS LOUD.

None

2010-01-01T23:59:59.000Z

386

Process for etching mixed metal oxides  

DOE Patents (OSTI)

An etching process using dicarboxylic and tricarboxylic acids as chelating etchants for mixed metal oxide films such as high temperature superconductors and ferroelectric materials. Undesirable differential etching rates between different metal oxides are avoided by selection of the proper acid or combination of acids. Feature sizes below one micron, excellent quality vertical edges, and film thicknesses in the 100 Angstom range may be achieved by this method.

Ashby, Carol I. H. (Edgewood, NM); Ginley, David S. (Evergreen, CO)

1994-01-01T23:59:59.000Z

387

Hydrocarbon Separations in Metal–Organic Frameworks  

Science Journals Connector (OSTI)

Given the large differences in the physical properties of methane and C2 hydrocarbons, both size selective effects and metal–hydrocarbon interactions can be tuned to achieve a high selectivity within a metal–organic framework. ... Polycyclic aromatic hydrocarbons, or PAHs, are carcinogenic byproducts of incomplete combustion of organic matter such as fossil fuels. ... data and the heats of adsorption were found to fit well to a small group of mol. ...

Zoey R. Herm; Eric D. Bloch; Jeffrey R. Long

2013-11-22T23:59:59.000Z

388

METAL MEDIA FILTERS, AG-1 SECTION FI  

SciTech Connect

One application of metal media filters is in various nuclear air cleaning processes including applications for protecting workers, the public and the environment from hazardous and radioactive particles. To support this application the development of the ASME AG-1 FI Standard on Metal Media has been under way for more than ten years. Development of the proposed section has required resolving several difficult issues associated with operating conditions (media velocity, pressure drop, etc.), qualification testing, and quality acceptance testing. Performance characteristics of metal media are dramatically different than the glass fiber media with respect to parameters like differential pressures, operating temperatures, media strength, etc. These differences make existing data for a glass fiber media inadequate for qualifying a metal media filter for AG-1. In the past much work has been conducted on metal media filters at facilities such as Lawrence Livermore National Laboratory (LLNL) and Savannah River National Laboratory (SRNL) to qualify the media as High Efficiency Particulate Air (HEPA) Filters. Particle retention testing has been conducted at Oak Ridge Filter Test Facility and at Air Techniques International (ATI) to prove that the metal media meets or exceeds the 99.97% particle retention required for a HEPA Filter. Even with his testing, data was lacking to complete an AG-1 FI Standard on metal media. With funding secured by Mississippi State University (MSU) from National Nuclear Security Administration (NNSA), a research test stand is being designed and fabricated at MSU's Institute for Clean Energy Technology (ICET) Facility to obtain qualification data on metal media. This in turn will support required data needed for the FI Standard. The paper will discuss in detail how the test stand at MSU will obtain the necessary data to complete the FI Standard.

Adamson, D.

2012-05-23T23:59:59.000Z

389

Refractory metals at the Plansee seminar  

SciTech Connect

Over 500 powder metallurgists from 33 countries met in May at the Walter-Schwarzkopf-Haus, Plansee AG, in Reutte, Tyrol, Austria, to discuss recent advances in refractory metals and hard materials. The powder metallurgists discuss refractory metal applications for automotive weight reduction and environmental issues, as driving forces in cutting tool developments, and improving diamond film and ultrafine tungsten carbide performance in tool inserts.

Capus, J.M. [Capus (Joseph M.), Beaconsfield, Quebec (Canada)

1997-12-01T23:59:59.000Z

390

Mixed Metal Films with Switchable Optical Properties  

NLE Websites -- All DOE Office Websites (Extended Search)

Mixed Metal Films with Switchable Optical Properties Mixed Metal Films with Switchable Optical Properties Title Mixed Metal Films with Switchable Optical Properties Publication Type Journal Article LBNL Report Number LBNL-49043 Year of Publication 2001 Authors Richardson, Thomas J., Jonathan L. Slack, Baker Farangis, and Michael D. Rubin Journal Applied Physics Letters Volume 80 Pagination 1349-1351 Call Number LBNL-49043 Abstract Thin, Pd-capped metallic films containing magnesium and first row transition metals (Mn, Fe, Co) switch reversibly from their initial reflecting state to visually transparent states when exposed to gaseous hydrogen or following reduction cathodic polarization in an alkaline electrolyte. Reversion to the reflecting state is achieved by exposure to air or by anodic polarization. The films were prepared by co-sputtering from one magnesium target and one manganese, iron, or cobalt target. Both the dynamic optical switching range and the speed of the transition depend on the magnesium-transition metal ratio. Infrared spectra of films in the transparent, hydrided (deuterided) states support the presence of the intermetallic hydride phases Mg3MnH7, Mg2FeH6, and Mg2CoH5.

391

Electrolytic recovery of reactor metal fuel  

DOE Patents (OSTI)

This invention is comprised of a new electrolytic process and apparatus using sodium, cerium or a similar metal in an alloy or within a sodium beta or beta-alumina sodium ion conductor to electrolytically displace each of the spent fuel metals except for Cesium and strontium on a selective basis from the electrolyte to an inert metal cathode. Each of the metals can be deposited separately. An electrolytic transfer of spent fuel into the electrolyte includes a sodium or cerium salt in the electrolyte with sodium or cerium alloy being deposited on the cathode during the transfer of the metals from the spent fuel. The cathode with the deposit of sodium or cerium alloy is then changed to an anode and the reverse transfer is carried out on a selective basis with each metal being deposited separately at the cathode. The result is that the sodium or cerium needed for the process is regenerated in the first step and no additional source of these reactants is required.

Miller, W.E.; Tomczuk, Z.

1993-02-03T23:59:59.000Z

392

METAL HYDRIDE HYDROGEN COMPRESSORS: A REVIEW  

SciTech Connect

Metal hydride (MH) thermal sorption compression is an efficient and reliable method allowing a conversion of energy from heat into a compressed hydrogen gas. The most important component of such a thermal engine the metal hydride material itself should possess several material features in order to achieve an efficient performance in the hydrogen compression. Apart from the hydrogen storage characteristics important for every solid H storage material (e.g. gravimetric and volumetric efficiency of H storage, hydrogen sorption kinetics and effective thermal conductivity), the thermodynamics of the metal-hydrogen systems is of primary importance resulting in a temperature dependence of the absorption/desorption pressures). Several specific features should be optimized to govern the performance of the MH-compressors including synchronisation of the pressure plateaus for multi-stage compressors, reduction of slope of the isotherms and hysteresis, increase of cycling stability and life time, together with challenges in system design associated with volume expansion of the metal matrix during the hydrogenation. The present review summarises numerous papers and patent literature dealing with MH hydrogen compression technology. The review considers (a) fundamental aspects of materials development with a focus on structure and phase equilibria in the metal-hydrogen systems suitable for the hydrogen compression; and (b) applied aspects, including their consideration from the applied thermodynamic viewpoint, system design features and performances of the metal hydride compressors and major applications.

Bowman Jr, Robert C [ORNL] [ORNL; Yartys, Dr. Volodymyr A. [Institute for Energy Technology (IFE)] [Institute for Energy Technology (IFE); Lototskyy, Dr. Michael V [University of the Western Cape, South Africa] [University of the Western Cape, South Africa; Pollet, Dr. B.G. [University of the Western Cape, South Africa

2014-01-01T23:59:59.000Z

393

Detection of Heavy Metal Ions Based on Quantum Point Contacts  

E-Print Network (OSTI)

. The ability to detect trace amounts of metal ions is important because of the toxicity of heavy metal ionsDetection of Heavy Metal Ions Based on Quantum Point Contacts Vasanth Rajagopalan, Salah Boussaad on many living organisms and the consequence of heavy metal ions not being biodegradable. To date, heavy

Zhang, Yanchao

394

Modeling Multi-Metal Ion Exchange in Biosorption  

E-Print Network (OSTI)

, may serve as a means for purifying industrial wastewaters that contain toxic heavy metal ions heavy metals often through ion exchange. This biosorption can be used for purification of metalModeling Multi-Metal Ion Exchange in Biosorption S I L K E S C H I E W E R A N D B O H U M I L V O

Volesky, Bohumil

395

Heavy Metal Tolerance Robert S. Boyd, Nishanta Rajakaruna  

E-Print Network (OSTI)

be useful to solve environmental problems caused by heavy metal pollution. General Overviews General: a recent example targeting cellular mechanisms affected by heavy metals is Bánfalvi 2011. Pollution by heavy metals is an important environmental problem, and sources that focus on heavy metal pollution

Rajakaruna, Nishanta

396

Muon method for structural defects investigation in ferromagnetic metals  

Science Journals Connector (OSTI)

Equations describing depolarization of positive muons implanted in a pure crystalline ferromagnetic metal...

L. A. Kuzmin; V. P. Melnichuk; V. Yu. Miloserdin…

1986-12-01T23:59:59.000Z

397

High surface area, electrically conductive nanocarbon-supported metal oxide  

DOE Patents (OSTI)

A metal oxide-carbon composite includes a carbon aerogel with an oxide overcoat. The metal oxide-carbon composite is made by providing a carbon aerogel, immersing the carbon aerogel in a metal oxide sol under a vacuum, raising the carbon aerogel with the metal oxide sol to atmospheric pressure, curing the carbon aerogel with the metal oxide sol at room temperature, and drying the carbon aerogel with the metal oxide sol to produce the metal oxide-carbon composite. The step of providing a carbon aerogel can provide an activated carbon aerogel or provide a carbon aerogel with carbon nanotubes that make the carbon aerogel mechanically robust.

Worsley, Marcus A; Han, Thomas Yong-Jin; Kuntz, Joshua D; Cervanted, Octavio; Gash, Alexander E; Baumann, Theodore F; Satcher, Jr., Joe H

2014-03-04T23:59:59.000Z

398

Recent developments in hydrogen storage applications based on metal hydrides  

Science Journals Connector (OSTI)

Metal hydrides have been commercialized for battery applications for more than 8 years. In case of storage applications, metal hydrides were extensively evaluated in combination with combustion engines. The relatively low gravimetric energy density of hydride tanks based on low temperature metal hydrides prevented the commercial use of that technology. Recently, lasting progress in the PEM fuel cell technology offers chances for metal hydride storage systems mainly for low power applications, but also for niche markets. The paper describes promising projects on metal hydride storage technology and gives an outlook about improvements of both the metal hydride alloy performance and the performance of metal hydride storage tanks.

V. Güther; A. Otto

1999-01-01T23:59:59.000Z

399

Method for forming glass-to-metal seals  

DOE Patents (OSTI)

A method for forming a glass-to-metal seal in which the glass has a higher melting point than the metal. The molten glass is vacuum injection molded onto the metal, thus melting a very thin layer of the surface of the metal long enough to form a seal, but not long enough to cause a distortion in the shape of the metal component.

Kramer, Daniel P. (Dayton, OH); Massey, Richard T. (Hamilton, OH)

1986-01-01T23:59:59.000Z

400

Wear 258 (2005) 17871793 Finite element analysis and experiments of metal/metal  

E-Print Network (OSTI)

of this simulation. © 2004 Published by Elsevier B.V. Keywords: Wear modeling; Finite element analysis 1 Published by Elsevier B.V. doi:10.1016/j.wear.2004.12.014 #12;1788 N.H. Kim et al. / Wear 258 (2005) 1787Wear 258 (2005) 1787­1793 Finite element analysis and experiments of metal/metal wear

Sawyer, Wallace

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Epsilon Metal Waste Form for Immobilization of Noble Metals from Used Nuclear Fuel  

SciTech Connect

Epsilon metal (?-metal), an alloy of Mo, Pd, Rh, Ru, and Tc, is being developed as a waste form to treat and immobilize the undissolved solids and dissolved noble metals from aqueous reprocessing of commercial used nuclear fuel. Epsilon metal is an attractive waste form for several reasons: increased durability relative to borosilicate glass, it can be fabricated without additives (100% waste loading), and in addition it also benefits borosilicate glass waste loading by eliminating noble metals from the glass and thus the processing problems related there insolubility in glass. This work focused on the processing aspects of the epsilon metal waste form development. Epsilon metal is comprised of refractory metals resulting in high reaction temperatures to form the alloy, expected to be 1500 - 2000°C making it a non-trivial phase to fabricate by traditional methods. Three commercially available advanced technologies were identified: spark-plasma sintering, microwave sintering, and hot isostatic pressing, and investigated as potential methods to fabricate this waste form. Results of these investigations are reported and compared in terms of bulk density, phase assemblage (X-ray diffraction and elemental analysis), and microstructure (scanning electron microscopy).

Crum, Jarrod V.; Strachan, Denis M.; Rohatgi, Aashish; Zumhoff, Mac R.

2013-02-01T23:59:59.000Z

402

Epsilon metal waste form for immobilization of noble metals from used nuclear fuel  

Science Journals Connector (OSTI)

Abstract Epsilon metal (?-metal), an alloy of Mo, Pd, Rh, Ru, and Tc, is being developed as a waste form to treat and immobilize the undissolved solids and dissolved noble metals from aqueous reprocessing of commercial used nuclear fuel. Epsilon metal is an attractive waste form for several reasons: increased durability relative to borosilicate glass, it can be fabricated without additives (100% waste loading), and in addition it also benefits borosilicate glass waste loading by eliminating noble metals from the glass, thus the processing problems related to their insolubility in glass. This work focused on the processing aspects of the epsilon metal waste form development. Epsilon metal is comprised of refractory metals resulting in high alloying temperatures, expected to be 1500–2000 °C, making it a non-trivial phase to fabricate by traditional methods. Three commercially available advanced technologies were identified: spark-plasma sintering, microwave sintering, and hot isostatic pressing, and investigated as potential methods to fabricate this waste form. Results of these investigations are reported and compared in terms of bulk density, phase assemblage (X-ray diffraction and elemental analysis), and microstructure (scanning electron microscopy).

Jarrod V. Crum; Denis Strachan; Aashish Rohatgi; Mac Zumhoff

2013-01-01T23:59:59.000Z

403

Transition metal oxide improves overall efficiency and maintains performance with inexpensive metals.  

E-Print Network (OSTI)

of a typical device (middle); schematic energy diagram of interfacial layers PbS/MoOx, indicating carrier metals. A research team at the National Renewable Energy Laboratory (NREL) has demonstrated the overall conversion efficiency. This allows for inexpensive metals such as Al to be employed without loss

404

Metallization of Fluid Hydrogen 3.1 Introduction to Metallic Hydrogen  

E-Print Network (OSTI)

Chapter 3 Metallization of Fluid Hydrogen 3.1 Introduction to Metallic Hydrogen 3.1.1 Some background on dense hydrogen Hydrogen, out of it the Universe evolved, every atom and leaf, marine iguana and apricot­smelling chanterelle. But my, my, what alchemy: nondescript H 2 --Diane Ackerman 1 -- Hydrogen

Louis, Ard

405

Effect of Deep Traps on the Barrier Heights of Metal-Insulator-Metal Tunnel Junctions  

Science Journals Connector (OSTI)

It is shown that the potential barrier ?max in a thin-film metal-insulator-metal system increases rapidly with increasing insulator thickness when electrons are immobilized in deep traps in the insulator, and at low voltage biases d?maxdV is independent of the insulator parameters. This effect may be an explanation of the observations of Lewicki and Mead.

J. G. Simmons

1969-08-11T23:59:59.000Z

406

Surface attack on metals in the presence of liquid metals. Final report  

SciTech Connect

A study was undertaken to evaluate liquid metals as electrical collectors in contact with solid metal alloys. Surface attack of the liquid metal on the solid metal is expected to be a major challenge to the development of a credible system. Low-melting-temperature metals and alloys of the fusible type are to be utilized for a collector that will operate in the 200-500 F range, with emphasis towards the lower end. Solid metals have been selected for experimental work based on their electrical properties and minimal potential reaction with the candidate liquid-metal alloys. Material properties of both liquid and solid metals were reviewed to identify initial material combinations for evaluation. Thorough literature searches were conducted to obtain as much pertinent physical-property and metallurgical data as possible, prior to actual experimental work. Process and material modelling was adopted to select candidate materials for both solids and liquids. Consideration of practical requirements for the eventual collectors is an integral part of the study. Work effort has concentrated on apparatus construction, evaluation and a program of testing to obtain screening data on materials selected and the chosen test method. Results have identified limitations of the test unit design and maximum current loads under test conditions with experimental current collectors. Candidate electrode materials have been exposed in low-melting fusible alloys for direct-dissolution data.

Beal, R.E.

1986-04-10T23:59:59.000Z

407

Nonpolar resistance switching of metal/binary-transition-metal oxides/metal sandwiches: Homogeneous/inhomogeneous transition of current distribution  

Science Journals Connector (OSTI)

Exotic features of a metal/oxide/metal sandwich, which will be the basis for a drastically innovative nonvolatile memory device, is brought to light from a physical point of view. Here the insulator is one of the ubiquitous and classic binary-transition-metal oxides (TMO), such as Fe2O3, NiO, and CoO. The sandwich exhibits a resistance that reversibly switches between two states: one is a highly resistive off state and the other is a conductive on state. Several distinct features were universally observed in these binary TMO sandwiches: namely, nonpolar switching, nonvolatile threshold switching, and current-voltage duality. From the systematic sample-size dependence of the resistance in on and off states, we conclude that the resistance switching is due to the formation of “electric faucet” at the interface, which shows up as a homogeneous to inhomogeneous transition of the current distribution.

I. H. Inoue; S. Yasuda; H. Akinaga; H. Takagi

2008-01-03T23:59:59.000Z

408

Method for recovering metals from waste  

DOE Patents (OSTI)

A method is described for recovering metals from metals-containing wastes, and vitrifying the remainder of the wastes for disposal. Metals-containing wastes such as circuit boards, cathode ray tubes, vacuum tubes, transistors and so forth, are broken up and placed in a suitable container. The container is heated by microwaves to a first temperature in the range of approximately 300--800 C to combust organic materials in the waste, then heated further to a second temperature in the range of approximately 1,000--1,550 C at which temperature glass formers present in the waste will cause it to melt and vitrify. Low-melting-point metals such as tin and aluminum can be recovered after organics combustion is substantially complete. Metals with higher melting points, such as gold, silver and copper, can be recovered from the solidified product or separated from the waste at their respective melting points. Network former-containing materials can be added at the start of the process to assist vitrification. 2 figs.

Wicks, G.G.; Clark, D.E.; Schulz, R.L.

1998-12-01T23:59:59.000Z

409

PLUTONIUM METALLIC FUELS FOR FAST REACTORS  

SciTech Connect

Early interest in metallic plutonium fuels for fast reactors led to much research on plutonium alloy systems including binary solid solutions with the addition of aluminum, gallium, or zirconium and low-melting eutectic alloys with iron and nickel or cobalt. There was also interest in ternaries of these elements with plutonium and cerium. The solid solution and eutectic alloys have most unusual properties, including negative thermal expansion in some solid-solution alloys and the highest viscosity known for liquid metals in the Pu-Fe system. Although metallic fuels have many potential advantages over ceramic fuels, the early attempts were unsuccessful because these fuels suffered from high swelling rates during burn up and high smearing densities. The liquid metal fuels experienced excessive corrosion. Subsequent work on higher-melting U-PuZr metallic fuels was much more promising. In light of the recent rebirth of interest in fast reactors, we review some of the key properties of the early fuels and discuss the challenges presented by the ternary alloys.

STAN, MARIUS [Los Alamos National Laboratory; HECKER, SIEGFRIED S. [Los Alamos National Laboratory

2007-02-07T23:59:59.000Z

410

Sheffield Metals International | Open Energy Information  

Open Energy Info (EERE)

Metals International Metals International Jump to: navigation, search Name Sheffield Metals International Address 5467 Evergreen Parkway Place Sheffield Village, Ohio Zip 44054 Sector Buildings, Efficiency, Solar Product Agriculture; Consulting; Manufacturing; Retail product sales and distribution;Trainining and education Phone number 800-283-5262 Website http://www.sheffieldmetals.com Coordinates 41.452914°, -82.072009° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.452914,"lon":-82.072009,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

411

WeldingFabr&MetalForm  

NLE Websites -- All DOE Office Websites (Extended Search)

Welding, Welding, Fabrication, and Metal Forming Manufacturing Technologies The department consists of three trades: weld- ing; fabrication and assembly; and precision metal forming. These interrelated groups use similar equipment and rely on each other's skills. One stop will get you the service of three reliable trades. The team manufactures and assembles proto- type hardware and has the in-house capability of producing hardware with sizes ranging from thumbnail to rail-car. Expertise includes aircraft quality sheet metal construction, certified weld- ing, and assembly. The staff has experience managing a variety of activities: design modifi- cation assistance; in-house fabrication; and project management and can work with your engineers to transform sketches and ideas into working prototypes.

412

Daiyang Metal Co Ltd | Open Energy Information  

Open Energy Info (EERE)

Daiyang Metal Co Ltd Daiyang Metal Co Ltd Jump to: navigation, search Name Daiyang Metal Co Ltd Place Seoul, Seoul, Korea (Republic) Zip 137-040 Sector Solar Product Stainless steel manufacturing and CIGS solar cell maker. Coordinates 37.557121°, 126.977379° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.557121,"lon":126.977379,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

413

Electron assisted $dd$ reactions in metals  

E-Print Network (OSTI)

The electron assisted low energy $dd$ reactions in deuterized metals are investigated. It is shown that if a metal is irradiated with slow, free deuterons then the $e+d+d\\rightarrow e^{\\prime }+p+t$ and $e+d+d\\rightarrow e^{\\prime }+n+$ $^{3}He$\\ electron assisted $dd$ processes will have measurable probabilities even in the case of slow deuterons. The cross sections and the yields in an irradiated sample are determined. The results are associated with the so called anomalous screening effect. It is concluded that the electron $dd$ processes have to be taken into account when evaluating the experimental data of low energy fusion reactions in metals.

Péter Kálmán; Tamás Keszthelyi

2014-02-19T23:59:59.000Z

414

Neutron Brillouin scattering in a metallic glass  

SciTech Connect

The dispersion of collective modes in a metallic glass (Mg{sub 70}Zn{sub 30}) measured earlier at the thermal neutron time-of-flight spectrometer IN4 of the HFR of the ILL could be extended towards lower momentum transfers down to the first pseudo-Brillouin zone for the first time. This extension to momentum transfer not accessible up to now was possible using the highly resolving time-of-flight spectrometer HET of the new spallation source ISIS. In the region of overlap the two parts of the dispersion determined with different samples of the same metallic glass on different instruments agree very well. Also the earlier discrepancies with the dispersion determined for this metallic glass from a computer simulation could be nearly completely eliminated due to a more recent and more complete investigations of this glass.

Suck, J.B. (Kernforschungszentrum Karlsruhe GmbH (Germany). Inst. fuer Nukleare Festkoerperphysik); Egelstaff, P.A. (Guelph Univ., ON (Canada). Dept. of Physics); Robinson, R.A.; Sivia, D.S. (Los Alamos National Lab., NM (United States)); Taylor, A.D. (Rutherford Appleton Lab., Chilton (United Kingdom))

1991-01-01T23:59:59.000Z

415

Effect of steam on supported metal catalysts  

SciTech Connect

In order to examine the effect of steam on supported metal catalysts, model supported metal catalysts of Ni, Co, or Fe on alumina have been heated in steam at 700/sup 0/C. The transmission electron micrographs show that for all these metals, patches of film extend from the crystallites. Prolonged heating results in the disappearance of the patches which probably spread as a contiguous film over the entire surface of the substrate. The degree of spreading is in the order: C0 > Ni > Fe. On subsequent heating in H/sub 2/, small crystallites were generated, probably via the rupture of the contiguous film. The contraction of the patches of film bridging two or several particles caused the coalescence of the latter. This subsequent heating in H/sub 2/ favors redispersion only when the heating time is sufficiently short. Prolonged heating in H/sub 2/ leads to the disappearance of the small particles.

Ruckenstein, E.; Hu, X.D.

1986-07-01T23:59:59.000Z

416

Chemical vapor deposition of group IIIB metals  

DOE Patents (OSTI)

Coatings of Group IIIB metals and compounds thereof are formed by chemical vapor deposition, in which a heat decomposable organometallic compound of the formula given in the patent where M is a Group IIIB metal, such as lanthanum or yttrium and R is a lower alkyl or alkenyl radical containing from 2 to about 6 carbon atoms, with a heated substrate which is above the decomposition temperature of the organometallic compound. The pure metal is obtained when the compound of the formula 1 is the sole heat decomposable compound present and deposition is carried out under nonoxidizing conditions. Intermetallic compounds such as lanthanum telluride can be deposited from a lanthanum compound of formula 1 and a heat decomposable tellurium compound under nonoxidizing conditions.

Erbil, A.

1989-11-21T23:59:59.000Z

417

Process for production of a metal hydride  

DOE Patents (OSTI)

A process for production of a metal hydride compound MH.sub.x, wherein x is one or two and M is an alkali metal, Be or Mg. The process comprises combining a compound of formula (R.sup.1O).sub.xM with aluminum, hydrogen and at least one metal selected from among titanium, zirconium, hafnium, niobium, vanadium, tantalum and iron to produce a compound of formula MH.sub.x. R.sup.1 is phenyl or phenyl substituted by at least one alkyl or alkoxy group. A mole ratio of aluminum to (R.sup.1O).sub.xM is from 0.1:1 to 1:1. The catalyst is present at a level of at least 200 ppm based on weight of aluminum.

Allen, Nathan Tait; Butterick, III, Robert; Chin, Arthur Achhing; Millar, Dean Michael; Molzahn, David Craig

2014-08-12T23:59:59.000Z

418

Reactor process using metal oxide ceramic membranes  

DOE Patents (OSTI)

A reaction vessel for use in photoelectrochemical reactions includes as its reactive surface a metal oxide porous ceramic membrane of a catalytic metal such as titanium. The reaction vessel includes a light source and a counter electrode. A provision for applying an electrical bias between the membrane and the counter electrode permits the Fermi levels of potential reaction to be favored so that certain reactions may be favored in the vessel. The electrical biasing is also useful for the cleaning of the catalytic membrane. Also disclosed is a method regenerating a porous metal oxide ceramic membrane used in a photoelectrochemical catalytic process by periodically removing the reactants and regenerating the membrane using a variety of chemical, thermal, and electrical techniques. 2 figures.

Anderson, M.A.

1994-05-03T23:59:59.000Z

419

Northern States Metals Company | Open Energy Information  

Open Energy Info (EERE)

Metals Company Metals Company Jump to: navigation, search Name Northern States Metals Company Address 3207 Innovation Place Place Youngstown, Ohio Zip 44509 Sector Solar Product Manufacturing Phone number 330-799-1855 Website http://extrusions.com Coordinates 41.123592°, -80.704685° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.123592,"lon":-80.704685,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

420

Magnetic Process For Removing Heavy Metals From Water Employing Magnetites  

NLE Websites -- All DOE Office Websites (Extended Search)

Magnetic Process For Removing Heavy Metals From Water Employing Magnetic Process For Removing Heavy Metals From Water Employing Magnetites Magnetic Process For Removing Heavy Metals From Water Employing Magnetites A process for removing heavy metals from water is provided. The process includes the steps of introducing magnetite to a quantity of water containing heavy metal. Available for thumbnail of Feynman Center (505) 665-9090 Email Magnetic Process For Removing Heavy Metals From Water Employing Magnetites A process for removing heavy metals from water is provided. The process includes the steps of introducing magnetite to a quantity of water containing heavy metal. The magnetite is mixed with the water such that at least a portion of, and preferably the majority of, the heavy metal in the water is bound to the magnetite. Once this occurs the magnetite and

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Electromagnetic augmentation for casting of thin metal sheets  

DOE Patents (OSTI)

Thin metal sheets are cast by magnetically levitating molten metal deposited in a model within a ferromagnetic yoke and between AC conducting coils and linearly displacing the magnetically levitated liquid metal while it is being cooled by the water-cooled walls of the mold to form a solid metal sheet. A conducting shield is electrically coupled to the molten metal sheet to provide a return path for eddy currents induced in the metal sheet by the current in the AC conducting coils. In another embodiment, a DC conducting coil is coupled to the metal sheet for providing a direct current therein which interacts with the magnetic field to levitate the moving metal sheet. Levitation of the metal sheet in both molten and solid forms reduces its contact pressure with the mold walls while maintaining sufficient engagement therebetween to permit efficient conductive cooling by the mold through which a coolant fluid may be circulated. 8 figs.

Hull, J.R.

1987-10-28T23:59:59.000Z

422

Supersonic Bare Metal Cluster Beams. Final Report  

DOE R&D Accomplishments (OSTI)

A major portion of the project involved elucidating the relation between reactivity and the electronic structure of transition-metal (TM) clusters of 2--200 atoms, which required the construction and continuous development of two principal apparati; the Fourier Transform-Ion Cyclotron Resonance (FT-ICR) apparatus, and Ultraviolet Photoelectron Spectroscopy (UPS). Together, these machines have enabled the most detailed probing of the structure and chemical reactivity of TM clusters. Clusters of all the transition metals were included in these studies. Fundamental aspects in chemisorption, reactivity, and heterogeneous catalysis have also become better understood as a result of these experiments for important classes of systems such as H{sub 2}, CO, and CO{sub 2} adsorbed onto clusters of many of the metals listed above. In particular, a correlation was found between reactivity of H{sub 2} with Fe, Co, and Ni clusters and differences between the cluster IP and EA. As recounted in a previous technical report, the DOE`s role in the initial discovery of fullerenes at Rice was central, and from the start investigations were made into metal atoms trapped in the fullerenes cage. More recently, the authors have discovered that 2--4 atoms of La, Y, or Sc can be produced by laser vaporization of composite graphite/metal-oxide disks. This work was largely motivated by the prospects of using such endohedral TM metals for their catalytic activity without the well-known difficulties of effective support media and lack of control over particle size. Thus, while it will certainly be important to discover ways to efficiently scale up production (e.g., the solar generation method explored with DOE support), the efforts have concentrated more on characterization, purification, and manipulation of doped fullerenes. For the past two years, much of the group`s effort has involved the production, purification, and characterization of carbon nanotubes.

Smalley, R. E.

1997-10-14T23:59:59.000Z

423

Novel Metallic Membranes for Hydrogen Separation  

SciTech Connect

To reduce dependence on oil and emission of greenhouse gases, hydrogen is favored as an energy carrier for the near future. Hydrogen can be converted to electrical energy utilizing fuel cells and turbines. One way to produce hydrogen is to gasify coal which is abundant in the U.S. The coal gasification produces syngas from which hydrogen is then separated. Designing metallic alloys for hydrogen separation membranes which will work in a syngas environment poses significant challenges. In this presentation, a review of technical targets, metallic membrane development activities at NETL and challenges that are facing the development of new technologies will be given.

Dogan, Omer

2011-02-27T23:59:59.000Z

424

Solid electrolytes strengthened by metal dispersions  

DOE Patents (OSTI)

An improvement in solid electrolytes of advanced secondary batteries of the sodium-sulfur, sodium-halogen, and like combinations is achieved by providing said battery with a cermet electrolyte containing a metal dispersion ranging from 0.1 to 10.0 vol. % of a substantially nonreactive metal selected from the group consisting essentially of Pt, Cr, Fe, Co, Ni, Nb, their alloys, and their physical mixtures in the elemental or uncombined state, the remainder of said cermet being an ion-conductive ceramic material.

Lauf, R.J.; Morgan, C.S.

1981-10-05T23:59:59.000Z

425

Solid electrolytes strengthened by metal dispersions  

DOE Patents (OSTI)

An improvement in solid electrolytes of advanced secondary batteries of the sodium-sulfur, sodium-halogen, and like combinations is achieved by providing said battery with a cermet electrolyte containing a metal dispersion ranging from 0.1 to 10.0 vol. % of a substantially nonreactive metal selected from the group consisting essentially of Pt, Cr, Fe, Co, Ni, Nb, their alloys, and their physical mixtures in the elemental or uncombined state, the remainder of said cermet being an ion-conductive ceramic material.

Lauf, Robert J. (Oak Ridge, TN); Morgan, Chester S. (Oak Ridge, TN)

1983-01-01T23:59:59.000Z

426

Metals purification by improved vacuum arc remelting  

DOE Patents (OSTI)

The invention relates to improved apparatuses and methods for remelting metal alloys in furnaces, particularly consumable electrode vacuum arc furnaces. Excited reactive gas is injected into a stationary furnace arc zone, thus accelerating the reduction reactions which purify the metal being melted. Additionally, a cooled condensation surface is disposed within the furnace to reduce the partial pressure of water in the furnace, which also fosters the reduction reactions which result in a purer produced ingot. Methods and means are provided for maintaining the stationary arc zone, thereby reducing the opportunity for contaminants evaporated from the arc zone to be reintroduced into the produced ingot.

Zanner, Frank J. (Sandia Park, NM); Williamson, Rodney L. (Albuquerque, NM); Smith, Mark F. (Albuquerque, NM)

1994-12-13T23:59:59.000Z

427

Fluctuating local thermoelectric heat in dirty metals  

SciTech Connect

Using a recently developed multilead theory of dephasing in mesoscopic conductors, the mean-squared magnitude of the local Peltier heat in a uniform disordered metal is calculated diagrammatically. A heuristic estimate based on conductance fluctuation theory is also developed, and gives the same results. The generation and absorption of local thermoelectric heats require both phase-coherent elastic scattering to produce local conductance fluctuations and phase-breaking inelastic scattering to transport heat to and from the reservoirs. This phenomenon can cause substantial spatial variations in the electron temperature of low-carrier-density, clean, quasi-two-dimensional metals.

DiVincenzo, D.P. (IBM Research Division, Thomas J. Watson Research Center, Yorktown Heights, New York 10598 (United States))

1993-07-15T23:59:59.000Z

428

Analysis of deformation of porous metals  

SciTech Connect

The elasto-plastic finite element method using a yield criterion advanced by Lee and Kim was employed to analyze the effect of indenting geometry on the Brinell hardness of sintered porous copper specimens with various densities. The changes in geometry of porous iron rings with various initial relative densities were also calculated for various friction coefficients between the metal rings and compression platens. The calculated hardness values were in very good agreement with the measured data. The friction coefficient could be determined from the relationship between the change in the inner diameter and height reduction of porous metal rings with various initial relative densities.

Lee, D.N.; Oh, K.H. [Seoul National Univ. (Korea, Republic of). Div. of Materials Science and Engineering; Han, H.N. [Pohang Iron and Steel Co., Ltd., Kyungbuk (Korea, Republic of). Technical Research Labs.; Kim, H.S. [Chungnam National Univ., Taejeon (Korea, Republic of). Dept. of Metallurgical Engineering

1998-12-31T23:59:59.000Z

429

Sensing the gas metal arc welding process  

SciTech Connect

Control of gas metal arc welding (GMAW) requires real-time sensing of the process. Three sensing techniques for GMAW are being developed at the Idaho National Engineering Laboratory (INEL). These are (1) noncontacting ultrasonic sensing using a laser/EMAT (electromagnetic acoustic transducer) to detect defects in the solidified weld on a pass-bypass basis, (2) integrated optical sensing using a CCD camera and a laser stripe to obtain cooling rate and weld bead geometry information, and (3) monitoring fluctuations in digitized welding voltage data to detect the mode of metal droplet transfer and assure that the desired mass input is achieved.

Carlson, N.M.; Johnson, J.A.; Smartt, H.B.; Watkins, A.D.; Larsen, E.D.; Taylor, P.L. [EG and G Idaho, Inc., Idaho Falls, ID (United States); Waddoups, M.A. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

1992-10-01T23:59:59.000Z

430

Sensing the gas metal arc welding process  

SciTech Connect

Control of gas metal arc welding (GMAW) requires real-time sensing of the process. Three sensing techniques for GMAW are being developed at the Idaho National Engineering Laboratory (INEL). These are (1) noncontacting ultrasonic sensing using a laser/EMAT (electromagnetic acoustic transducer) to detect defects in the solidified weld on a pass-bypass basis, (2) integrated optical sensing using a CCD camera and a laser stripe to obtain cooling rate and weld bead geometry information, and (3) monitoring fluctuations in digitized welding voltage data to detect the mode of metal droplet transfer and assure that the desired mass input is achieved.

Carlson, N.M.; Johnson, J.A.; Smartt, H.B.; Watkins, A.D.; Larsen, E.D.; Taylor, P.L. (EG and G Idaho, Inc., Idaho Falls, ID (United States)); Waddoups, M.A. (Idaho National Engineering Lab., Idaho Falls, ID (United States))

1992-01-01T23:59:59.000Z

431

Metal?Support Interactions in Zeolite-Supported Noble Metals:? Influence of Metal Crystallites on the Support Acidity  

Science Journals Connector (OSTI)

The metal?support interactions on a series of catalysts of different acidities, including platinum-modified zeolites and H?MCM-41, are investigated by means of XPS, CO and pyridine adsorption, and a model reaction (ring opening of decalin). The electronic ...

David Kubi?ka; Narendra Kumar; Tapani Venäläinen; Hannu Karhu; Iva Kubi?ková; Heidi Österholm; Dmitry Yu. Murzin

2006-02-24T23:59:59.000Z

432

Method and apparatus for atomization and spraying of molten metals  

DOE Patents (OSTI)

A method and device for dispersing molten metal into fine particulate spray, the method comprises applying an electric current through the molten metal and simultaneously applying a magnetic field to the molten metal in a plane perpendicular to the electric current, whereby the molten metal is caused to form into droplets at an angle perpendicular to both the electric current and the magnetic field. The device comprises a structure for providing a molten metal, appropriately arranged electrodes for applying an electric current through the molten metal, and a magnet for providing a magnetic field in a plane perpendicular to the electric current. 11 figs.

Hobson, D.O.; Alexeff, I.; Sikka, V.K.

1988-07-19T23:59:59.000Z

433

Chemistry and cooling in metal-free and metal-poor gas  

E-Print Network (OSTI)

I summarize four of the most important areas of uncertainty in the study of the chemistry and cooling of gas with zero or very low metallicity. These are: i) the importance and effects of HD cooling in primordial gas; ii) the importance of metal-line and dust cooling in low metallicity gas; iii) the impact of the large uncertainties that exist in the rate coefficients of several key reactions involved in the formation of H2; and iv) the effectiveness of grain surface chemistry at high redshifts.

S. C. O. Glover

2007-09-04T23:59:59.000Z

434

Gel bead composition for metal adsorption  

DOE Patents (OSTI)

The invention is a gel bead comprising propylene glycol alginate and bone gelatin and is capable of removing metals such as Sr and Cs from solution without adding other adsorbents. The invention could have application to the nuclear industry's waste removal activities.

Scott, Charles D. (Oak Ridge, TN); Woodward, Charlene A. (Oak Ridge, TN); Byers, Charles H. (Oak Ridge, TN)

1991-01-01T23:59:59.000Z

435

Heavy metals behaviour in a gasification reactor  

Science Journals Connector (OSTI)

Sludge coming from cleaning processes of wastewater, Municipal Solid Waste (MSW), and Refuse Derived Fuel (RDF) can be exploited for producing energy because of their heating value. Cleaning the produced syngas is important because of environmental troubles, ... Keywords: heavy metals, syngas, thermodynamic, waste gasification

Martino Paolucci; Carlo Borgianni; Paolo De Filippis

2011-07-01T23:59:59.000Z

436

STANDARD OPERATING PROCEDURE HEAVY METAL SALTS (selected)  

E-Print Network (OSTI)

MSDS ___Special training provided by the department/supervisor ___Review of the OSHA Lab Standard ___Review of the departmental safety manual ___Review of the Chemical Hygiene Plan ___Safety meetings12.1 STANDARD OPERATING PROCEDURE for HEAVY METAL SALTS (selected) Location

Pawlowski, Wojtek

437

The industrial ecology of metals: a reconnaissance  

Science Journals Connector (OSTI)

...Washington, DC 20036, USA Industrial ecology involves a systems...products to landfills. The industrial ecology of metals...Audrey Webber4 1 Belfer Center for Science and International...Washington, DC 20036, USA Industrial ecology involves a systems...Office of Technology Assessment 1992, based on personal...

1997-01-01T23:59:59.000Z

438

Carbide Precipitation in Steel Weld Metals  

E-Print Network (OSTI)

Carbide Precipitation in Steel Weld Metals www.msm.cam.ac.uk/phase-trans #12 diffusion into austenite Carbon diffusion into austenite and carbide precipitation in ferrite Carbide precipitation from austenite CASE 2: elimination of carbides #12;#12;#12;0.110.090.070.050.03 0.2 0.4 0.6 0.8 1

Cambridge, University of

439

Encapsulated Metal Hydride for Hydrogen Separation  

E-Print Network (OSTI)

concentration feed stock, not for low concentration � Hydrogen economy will need hydrogen recovery from lowEncapsulated Metal Hydride for Hydrogen Separation (Formerly Separation Membrane Development) DOE Hydrogen Program 2003 Merit Review and Peer Evaluation L. Kit Heung, Jim Congdon Savannah River Technology

440

Memristor using a transition metal nitride insulator  

DOE Patents (OSTI)

Apparatus is disclosed in which at least one resistive switching element is interposed between at least a first and a second conducting electrode element. The resistive switching element comprises a metal oxynitride. A method for making such a resistive switching element is also disclosed.

Stevens, James E; Marinella, Matthew; Lohn, Andrew John

2014-10-28T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Additive manufacturing of metallic tracks on  

E-Print Network (OSTI)

Additive manufacturing of metallic tracks on green ceramic/dielectrics Problem this technology (note: may require additional tooling/ set up time) · Rapid Prototyping & small scale manufacture microelectronics such as manufacture of LTCC ceramic/ Dielectric antenna and rapid PCB prototyping or repair

Painter, Kevin

442

Analytical electron microscopy of rapidly solidified metals  

SciTech Connect

Examples of the need to characterize rapidly solidified metals on submicron scale are given for centrifugally atomized steel powder and electrohydrodynamically atomized submicron spheres. Materials studied include Fe-40wt% Ni, 304 SS, Fe-20at.%Co, and pure V.

Kelly, T.F.; Holzman, L.M.; Shin, K.; Kim, Y.W.; Bae, J.C.; Flinn, J.E.; Camus, P.P.; Melmed, A.J.

1991-12-31T23:59:59.000Z

443

Ice nanoclusters at hydrophobic metal surfaces  

E-Print Network (OSTI)

and characterization of metal-supported water hexamers and a family of hydrated nanoclusters-- heptamers, octamers to nucleate through the presence of an `ice nucleating agent': a microscopic seed particle of salt, sand or such as the formation of new water structures not observed in the gas phase, altered H-bond strengths or different

444

Local magnetic fields in disordered metals  

Science Journals Connector (OSTI)

We show that in a disordered metal the local magnetic fields generated by the magnetic-field-induced orbital-electron currents will fluctuate strongly in magnitude and direction. We argue that this phenomenon should be reflected by a noticeable inhomogeneous broadening of NMR lines and analyze its dependence on system geometry and temperature.

R. A. Serota and A. Yu. Zyuzin

1993-06-01T23:59:59.000Z

445

INELASTIC CONTACT DEFORMATION OF METAL COATED FIBERS  

E-Print Network (OSTI)

16 April 1997; accepted 23 June 1997) AbstractÐMetal matrix composites (MMCs) can be synthesized deposition of the matrix onto a ceramic reinforcing ®ber (e.g. SiC, Al2O3) held at a relatively low and ®ber microbending/damage during the consolidation of titanium matrix composite (TMC) monotapes produced

Wadley, Haydn

446

Metallic Hydrogen: A High-Temperature Superconductor?  

Science Journals Connector (OSTI)

Application of the BCS theory to the proposed metallic modification of hydrogen suggests that it will be a high-temperature superconductor. This prediction has interesting astrophysical consequences, as well as implications for the possible development of a superconductor for use at elevated temperatures.

N. W. Ashcroft

1968-12-23T23:59:59.000Z

447

Liquid suspensions of reversible metal hydrides  

DOE Patents (OSTI)

The reversibility of the process M + x/2 H/sub 2/ ..-->.. MH/sub x/, where M is a metal hydride former that forms a hydride MH/sub x/ in the presence of H/sub 2/, generally used to store and recall H/sub 2/, is found to proceed under a liquid, thereby to reduce contamination, provide better temperature control and provide in situ mobility of the reactants. Thus, a slurry of particles of a metal hydride former with an inert solvent is subjected to temperature and pressure controlled atmosphere containing H/sub 2/, to store hydrogen (at high pressures) and to release (at low pressures) previously stored hydrogen. The direction of the flow of the H/sub 2/ through the liquid is dependent upon the H/sub 2/ pressure in the gas phase at a given temperature. When the former is above the equilibrium absorption pressure of the respective hydride the reaction proceeds to the right, i.e., the metal hydride is formed and hydrogen is stored in the solid particle. When the H/sub 2/ pressure in the gas phase is below the equilibrium dissociation pressure of the respective hydride the reaction proceeds to the left, the metal hydride is decomposed and hydrogen is released into the gas phase.

Reilly, J.J.; Grohse, E.W.; Winsche, W.E.

1983-12-08T23:59:59.000Z

448

Enhanced Absorption Induced by a Metallic Nanoshell  

E-Print Network (OSTI)

Enhanced Absorption Induced by a Metallic Nanoshell Roi Baer* Department of Physical Chemistry ABSTRACT Nanoshells have been previously shown to have tunable absorption frequencies that are dependent on the ratio of their inner and outer radii. Inspired by this, we ask: can a nanoshell increase the absorption

Baer, Roi

449

Preparation of porphyrins and their metal complexes  

DOE Patents (OSTI)

A hydroxyl-containing pyrrolic compound having a hydroxyl group or a hydroxyl-containing group in the 2-position, optionally substituted in the beta positions, is condensed in an acidified two immiscible phase solvent system to produce excellent yields of the corresponding porphyrin or metal porphyrin.

Ellis, P.E. Jr.; Langdale, W.A.

1997-08-19T23:59:59.000Z

450

Low-Energy Nuclear Reactions in Metals  

Science Journals Connector (OSTI)

......research-article Articles Low-Energy Nuclear Reactions in Metals Jirohta Kasagi...reactions in Pd and Au for bombarding energies between 30 and 75 keV. These...measurements clearly showed that the low energy nuclear reactions are strongly affected......

Jirohta Kasagi

2004-02-01T23:59:59.000Z

451

Equation of state of metallic helium  

SciTech Connect

The effective ion-ion interaction, free energy, pressure, and electric resistance of metallic liquid helium have been calculated in wide density and temperature ranges using perturbation theory in the electron-ion interaction potential. In the case of conduction electrons, the exchange interaction has been taken into account in the random-phase approximation and correlations have been taken into account in the local-field approximation. The solid-sphere model has been used for the nuclear subsystem. The diameter of these spheres is the only parameter of this theory. The diameter and density of the system at which the transition of helium from the singly ionized to doubly ionized state occurs have been estimated by analyzing the pair effective interaction between helium atoms. The case of doubly ionized helium atoms has been considered. Terms up to the third order of perturbation theory have been taken into account in the numerical calculations. The contribution of the third-order term is significant in all cases. The electric resistance and its temperature dependence for metallic helium are characteristic of simple divalent metals in the liquid state. The thermodynamic parameters-temperature and pressure densities-are within the ranges characteristic of the central regions of giant planets. This makes it possible to assume the existence of helium in the metallic state within the solar system.

Shvets, V. T., E-mail: tarval@breezein.net [Odessa State Academy of Refrigeration (Ukraine)

2013-01-15T23:59:59.000Z

452

Carbon nanotube-clamped metal atomic chain  

Science Journals Connector (OSTI)

...previous investigations on elementary (Au) (24, 26) and...manipulated by a piezo-electric tube to touch the metal-filled...which is used as the resistance for correction, when...1970 ) Electrical resistance of disordered one-dimensional...Carbon | Anisotropy Electric Conductivity Electrodes...

Dai-Ming Tang; Li-Chang Yin; Feng Li; Chang Liu; Wan-Jing Yu; Peng-Xiang Hou; Bo Wu; Young-Hee Lee; Xiu-Liang Ma; Hui-Ming Cheng

2010-01-01T23:59:59.000Z

453

Preparation of porphyrins and their metal complexes  

DOE Patents (OSTI)

A hydroxyl-containing pyrrolic compound having a hydroxyl group or a hydroxyl-containing group in the 2-position, optionally substituted in the beta positions, is condensed in an acidified two immiscible phase solvent system to produce excellent yields of the corresponding porphyrin or metal porphyrin.

Ellis, Jr., Paul E. (Downingtown, PA); Langdale, Wayne A. (Wenonah, NJ)

1997-01-01T23:59:59.000Z

454

Metal impacts on microbial biomass in the anoxic sediments of a contaminated lake  

E-Print Network (OSTI)

metal partitioning in sediments by a sequential extraction8), 836-840. Metals and sediment microbial biomass Ruxton,risk of metals in sediments, Environ. Toxicol. Chem. , 15(

Gough, Heidi L.

2011-01-01T23:59:59.000Z

455

Levels of metals from salt marsh plants from Southern California, USA  

E-Print Network (OSTI)

sedimentary record of heavy metal pollution in the lagoon ofcapacity for heavy metals. Environmental Pollution, 146,heavy metals in experimental salt marsh ecosystems. Environmental Pollution,

Hoyt, Kimberly Ann

2009-01-01T23:59:59.000Z

456

Bioavailability of Cadmium and Zin to Two Earthworm Species in High-metal Soils  

E-Print Network (OSTI)

tolerance capacity for heavy metals pollution (Díez-Ortiz etof heavy metals in soils. Environmental Pollution 113, 135-heavy metals in terrestrial invertebrates. Environmental Pollution

Liu, Ying

2012-01-01T23:59:59.000Z

457

E-Print Network 3.0 - alkali metal nitrate Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

METAL-ALKALI HALIDE Summary: CONDUCTIVITY OF ALKALI METAL-ALKALI HALIDE SOLUTIONS R. GILBERT and G. J. MORGAN The Physics Department... to liquid alkali metals electrons are...

458

Simple test for dissimilar-metal welds  

SciTech Connect

A simplified accelerated test procedure has been developed for testing dissimilar-metal welds between austenitic stainless steels and low-alloy ferritic steels. The failure of these welded joints in operating steam generators of fossil-fired power plants has become an increasing problem for the utility industry. The proposed test is a three-point loading, bent-beam test that uses sheet specimens taken from a dissimilar-metal weldment. Tests were conducted in a simple test fixture where the specimens are loaded with a set-screw. To determine whether the test produces the same type of failure as those produced in a power plant, tests were conducted on specimens taken from a weld between Type 316 stainless steel and 2 1/4 Cr-1 Mo steel plates using Type 309 stainless steel filler metal. The specimens were loaded in the test fixture at room temperature and then thermally cycled between room temperature and 593/sup 0/C (1099/sup 0/F) by placing the test apparatus in a box furnace (thermal cycling during power plant operation plays a major role in the weld failure during service). The specimens were kept in the furnace for 20 to 70 hours (h), cooled to room temperature, and then the cycle was repeated. Metallographic examination of specimens cycled as few as 64 times with a total of 2300 h at 593/sup 0/C revealed that the specimens contained cracks similar to the cracks observed on dissimilar-metal welds cut from steam tubes after long-time elevated-temperature service racks similar to the cracks observed on dissimilar-metal welds cut from steam tubes after longtime elevated-temperature service in a fossil-fired steam generator. All indications are that this simple accelerated test could be used as a screening procedure to compare the relative behavior of ''improved'' welds in future research and development programs.

Klueh, R.L.; King, J.F.; Griffith, J.L.

1983-06-01T23:59:59.000Z

459

Metal Toxicity Reduction in Naphthalene Biodegradation by Use of Metal-Chelating Adsorbents  

Science Journals Connector (OSTI)

...Biodegradation by Use of Metal-Chelating Adsorbents Pomthong Malakul Keeran R. Srinivasan...adsorption characteristics of these adsorbents, such as adsorption capacity and selectivity...insignificantly or large amounts of adsorbents were needed due to a poor selectivity...

Pomthong Malakul; Keeran R. Srinivasan; Henry Y. Wang

1998-11-01T23:59:59.000Z

460

Fast tuning of Fano resonance in metal/phase-change materials/metal metamaterials  

Science Journals Connector (OSTI)

We propose fast tuning of a Fano resonance (FR) in a three dimensional metamaterial (MM). The MM consists of an elliptical nanohole array (ENA) embedded through a metal/ phase-change...

Cao, Tun; Wei, Chenwei; Simpson, Robert E; Zhang, Lei; Cryan, Martin J

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Strengthening porous metal skeletons by metal deposition from a nanoparticle dispersion  

E-Print Network (OSTI)

The accuracy of solid freeform fabrication processes such as three-dimensional printing (3DP) and selective laser sintering (SLS) must be improved for them to achieve wide application in direct production of metal parts. ...

Crane, Nathan B., 1974-

2005-01-01T23:59:59.000Z

462

& MetalOrganic Frameworks Enhancing CO2 Separation Ability of a MetalOrganic Framework  

E-Print Network (OSTI)

that it is a promising material for sequestering CO2 from landfill gas. Introduction Metal­organic frameworks have been considered as promising materials for separating CO2 from landfill gas and industrial flue gas due

Paik Suh, Myunghyun

463

Sorption kinetic studies using metal chelate embedded polymers for recovery of heavy metals from desalination effluents  

Science Journals Connector (OSTI)

The heavy metals, such as uranium and vanadium, are some of the valuable metals in desalination effluents. Metal Chelate Embedded Polymers (MCEP) in leaflet form were prepared using the post-irradiation induced graft polymerisation technique, with different non-woven thermally bonded fibrous substrate materials. The novel sorbents, synthesised by using accelerator energy beams of 1.25 MeV and 2 MeV, were characterised for their radiation, chemical and mechanical characteristics. The novel sorbent was evaluated under different parametric conditions, in order to study the influence of grafting levels, initial concentration, dissolved solids and contact time. The standard isotherm and diffusion models were fitted to the experimental sorption data and model parameters were evaluated. The sorption characteristics of MCEP for recovery of heavy metals such as uranium and vanadium from desalination effluents were investigated.

T.L. Prasad; P.K. Tewari; D. Sathiyamoorthy

2011-01-01T23:59:59.000Z

464

ITP Metal Casting: Advanced Melting Technologies: Energy Saving Concepts and Opportunities for the Metal Casting Industry  

Energy.gov (U.S. Department of Energy (DOE))

The study examines current and emerging melting technologies and discusses their technical barriers to scale-up issues and research needed to advance these technologies, improving melting efficiency, lowering metal transfer heat loss, and reducing scrap.

465

A study of plasma etching for use on active metals  

E-Print Network (OSTI)

Active metals can be used as a getter pump, removing impurities in ultra-pure high vacuum environments. To relieve the difficulties involved with the transportation, storage and handling of these metals, a process is being ...

Nishimoto, Keane T. (Keane Takeshi), 1981-

2005-01-01T23:59:59.000Z

466

Heteroepitaxial Self Assembling Noble Metal Nanoparticles in Monocrystalline Silicon  

E-Print Network (OSTI)

and investigate fundamental properties. Noble metal nanoparticles made of gold or silver are grown in cavities in monocrystalline silicon formed by helium ion implantation and high temperature annealing at depth greater than 500 nm from the surface. Metals...

Martin, Michael S.

2013-08-13T23:59:59.000Z

467

Functional Mesoporous Metal-Organic Frameworks for the Capture...  

NLE Websites -- All DOE Office Websites (Extended Search)

Functional Mesoporous Metal-Organic Frameworks for the Capture of Heavy Metal Ions and Size-Selective Catalysis Previous Next List Qian-Rong Fang, Da-Qian Yuan, Julian Sculley,...

468

DOE - Office of Legacy Management -- Amex Specialty Metal Corp...  

Office of Legacy Management (LM)

Amex Specialty Metal Corp - MI 0-01 FUSRAP Considered Sites Site: Amex Specialty Metal Corp (MI.0-01 ) Eliminated from further consideration under FUSRAP Designated Name: Not...

469

Metal-bonded, carbon fiber-reinforced composites  

DOE Patents (OSTI)

Metal bonded carbon fiber-reinforced composites are disclosed in which the metal and the composite are strongly bound by (1) providing a matrix-depleted zone in the composite of sufficient depth to provide a binding site for the metal to be bonded and then (2) infiltrating the metal into the matrix-free zone to fill a substantial portion of the zone and also provide a surface layer of metal, thereby forming a strong bond between the composite and the metal. The invention also includes the metal-bound composite itself, as well as the provision of a coating over the metal for high-temperature performance or for joining to other such composites or to other substrates.

Sastri, Suri A. (Lexington, MA); Pemsler, J. Paul (Lexington, MA); Cooke, Richard A. (Framingham, MA); Litchfield, John K. (Bedford, MA); Smith, Mark B. (Ipswich, MA)

1996-01-01T23:59:59.000Z

470

Metal-bonded, carbon fiber-reinforced composites  

DOE Patents (OSTI)

Metal bonded carbon fiber-reinforced composites are disclosed in which the metal and the composite are strongly bound by (1) providing a matrix-depleted zone in the composite of sufficient depth to provide a binding site for the metal to be bonded and then (2) infiltrating the metal into the matrix-free zone to fill a substantial portion of the zone and also provide a surface layer of metal, thereby forming a strong bond between the composite and the metal. The invention also includes the metal-bound composite itself, as well as the provision of a coating over the metal for high-temperature performance or for joining to other such composites or to other substrates. 2 figs.

Sastri, S.A.; Pemsler, J.P.; Cooke, R.A.; Litchfield, J.K.; Smith, M.B.

1996-03-05T23:59:59.000Z

471

Modeling the operating voltage of liquid metal battery cells  

E-Print Network (OSTI)

A one-dimensional, integrative model of the voltage during liquid metal battery operation has been developed to enhance the understanding of performance at the cell level. Two liquid metal batteries were studied: Mg-Sb for ...

Newhouse, Jocelyn Marie

2014-01-01T23:59:59.000Z

472

Spatially and polarization resolved plasmon mediated transmission through continuous metal  

E-Print Network (OSTI)

Spatially and polarization resolved plasmon mediated transmission through continuous metal films Y transmission through an embedded undulated continuous thin metal film under normal incidence. 1D undulations resolved, polarization independent transmission. Whereas the needed submicron microstructure lends itself

Boyer, Edmond

473

Oxygen-induced magnetic properties and metallic behavior of a...  

NLE Websites -- All DOE Office Websites (Extended Search)

Oxygen-induced magnetic properties and metallic behavior of a BN sheet. Oxygen-induced magnetic properties and metallic behavior of a BN sheet. Abstract: In this paper, ab initio...

474

Chemistry of Metal Contaminants in Water Project at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemistry of Metal Contaminants in Water Chemistry of Metal Contaminants in Water BylaskaZinc.jpg A plot of difference electron density of a Zn2++6H2O250H2O system from AIMDMM...

475

Process for removing technetium from iron and other metals  

DOE Patents (OSTI)

A process for removing technetium from iron and other metals comprises the steps of converting the molten, alloyed technetium to a sulfide dissolved in manganese sulfide, and removing the sulfide from the molten metal as a slag. 4 figs.

Leitnaker, J.M.; Trowbridge, L.D.

1999-03-23T23:59:59.000Z

476

In-situ ductile metal/bulk metallic glass matrix composites formed by chemical partitioning  

DOE Patents (OSTI)

A composite metal object comprises ductile crystalline metal particles in an amorphous metal matrix. An alloy is heated above its liquidus temperature. Upon cooling from the high temperature melt, the alloy chemically partitions, forming dendrites in the melt. Upon cooling the remaining liquid below the glass transition temperature it freezes to the amorphous state, producing a two-phase microstructure containing crystalline particles in an amorphous metal matrix. The ductile metal particles have a size in the range of from 0.1 to 15 micrometers and spacing in the range of from 0.1 to 20 micrometers. Preferably, the particle size is in the range of from 0.5 to 8 micrometers and spacing is in the range of from 1 to 10 micrometers. The volume proportion of particles is in the range of from 5 to 50% and preferably 15 to 35%. Differential cooling can produce oriented dendrites of ductile metal phase in an amorphous matrix. Examples are given in the Zr--Ti--Cu--Ni--Be alloy bulk glass forming system with added niobium.

Kim, Choong Paul (Northridge, CA); Hays, Charles C. (Pasadena, CA); Johnson, William L. (Pasadena, CA)

2007-07-17T23:59:59.000Z

477

Metal-Organic Frameworks with Precisely Designed Interior for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Metal-Organic Frameworks with Precisely Designed Interior for Carbon Dioxide Capture in the Presence of Water...

478

Metal-air low temperature ionic liquid cell  

DOE Patents (OSTI)

The present application relates to an electrochemical metal-air cell in which a low temperature ionic liquid is used.

Friesen, Cody A; Buttry, Daniel A

2014-11-25T23:59:59.000Z

479

Development of a metal hydride electrode waste treatment process  

SciTech Connect

Manufacturing residues of metal hydride electrodes for nickel - metal hydride batteries were chemically processed to recover the metal part and heat treated for the organic part. Chemical recovery yielded Ni-Co alloy after electrolysis of the solution and hydroxides of other metal, mainly rare earths. The organic part, pyrolyzed at 700 C, led to separation between carbon and fluorinated matter. Infrared coupling at the output of the pyrolysis furnace was used to identify the pyrolysis gases.

Bianco, J.C.; Martin, D.; Ansart, F.; Castillo, S.

1999-12-01T23:59:59.000Z

480

Pressurized tundish for controlling a continuous flow of molten metal  

DOE Patents (OSTI)

A pressurized tundish for controlling a continous flow of molten metal characterized by having a pair of principal compartments, one being essentially unpressurized and receiving molten metal introduced thereto, and the other being adapted for maintaining a controlled gaseous pressure over the surface of the fluid metal therein, whereby, by controlling the pressure within the pressurized chamber, metal exiting from the tundish is made to flow continually and at a controlled rate.

Lewis, Thomas W. (964 Cork Dr., Bethel Park, PA 15102); Hamill, Jr., Paul E. (R.D. #1, Box 173A1, Jeannette, PA 15644); Ozgu, Mustafa R. (790 Yorkshire Rd., Bethlehem, PA 18017); Padfield, Ralph C. (1918 Paul Ave., Bethlehem, PA 18018); Rego, Donovan N. (1703 W. Brown St., Allentown, PA 18104); Brita, Guido P. (3225 Edna Terrace Ave., Bethlehem, PA 18017)

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "metal stampings ordnance" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

(Electronic structure and reactivities of transition metal clusters)  

SciTech Connect

The following are reported: theoretical calculations (configuration interaction, relativistic effective core potentials, polyatomics, CASSCF); proposed theoretical studies (clusters of Cu, Ag, Au, Ni, Pt, Pd, Rh, Ir, Os, Ru; transition metal cluster ions; transition metal carbide clusters; bimetallic mixed transition metal clusters); reactivity studies on transition metal clusters (reactivity with H{sub 2}, C{sub 2}H{sub 4}, hydrocarbons; NO and CO chemisorption on surfaces). Computer facilities and codes to be used, are described. 192 refs, 13 figs.

Not Available

1992-01-01T23:59:59.000Z

482

Is neutron radiation exposure always detrimental to metals (steels)?  

Science Journals Connector (OSTI)

... E. O. in Irradiation Effects on the Microstructure and Properties of Metals 53–71 (ASTM STP 611, Philadelphia, 1976).

K. Linga Murty

1984-03-01T23:59:59.000Z

483

Increasing the Stability of Metal-Organic Frameworks | Center...  

NLE Websites -- All DOE Office Websites (Extended Search)

functional groups and unsaturated metal centers have afforded excellent gas sorption and separation ability, catalytic activity, luminescent properties, and more....

484

Pressurized tundish for controlling a continuous flow of molten metal  

DOE Patents (OSTI)

A pressurized tundish for controlling a continuous flow of molten metal is characterized by having a pair of principal compartments, one being essentially unpressurized and receiving molten metal introduced thereto, and the other being adapted for maintaining a controlled gaseous pressure over the surface of the fluid metal therein, whereby, by controlling the pressure within the pressurized chamber, metal exiting from the tundish is made to flow continually and at a controlled rate. 1 fig.

Lewis, T.W.; Hamill, P.E. Jr.; Ozgu, M.R.; Padfield, R.C.; Rego, D.N.; Brita, G.P.

1990-07-24T23:59:59.000Z

485

X-ray-edge problem in metals. II. Alkali-metal atoms adsorbed on alkali and other metal surfaces  

Science Journals Connector (OSTI)

Outer-core spectra are reported for Cs and Rb adsorbed on clean surfaces of the alkali metals and Mg. In most cases the spectrum at threshold resembles a broadened resonance line close to the energy of the atomic transition, with additional structure on the high-energy side. With increasing electron density of the substrate, the line broadens and disappears into a profile which increases approximately linearly from zero at a red-shifted threshold. In no case does the adsorbate spectrum resemble the sharp edge and overshoot observed for the bulk metal. Above about one monolayer in many cases, a discrete feature occurs on the red wing of the threshold line and grows systematically with coverage into the dominant spectrum of the pure bulk adsorbate at about 5 monolayers. The general behavior is qualitatively consistent with the behavior of alkali-alkali alloys, reported in the paper which immediately precedes this one.

Doon Gibbs; T.-H. Chiu; J. E. Cunningham; C. P. Flynn

1985-07-15T23:59:59.000Z

486

Biosorption of anionic metal complexes Hui Niu and Bohumil Volesky*  

E-Print Network (OSTI)

containing toxic heavy metals, often in anionic complex forms such as anionic chromate (CrO4 2- ), vanadate1 Biosorption of anionic metal complexes Hui Niu and Bohumil Volesky* http Street, MONTREAL, Canada H3A 2B2 *corresponding author Anionic metal complexes, are very effectively

Volesky, Bohumil

487

Detection of Heavy Metal Ions in Drinking Water Using a  

E-Print Network (OSTI)

, and clinical toxicology. A number of techniques have been developed over the years for heavy metal ion analysisDetection of Heavy Metal Ions in Drinking Water Using a High-Resolution Differential Surface-resolution differential surface plasmon resonance (SPR) sensor for heavy metal ion detection. The sensor surface

Chen, Wilfred

488

Heavy Metal Tolerance in Plants J.ANTONOVIOS  

E-Print Network (OSTI)

#12;Heavy Metal Tolerance in Plants J.ANTONOVIOS Department of Biology. University of Stirling to Sprays and Toxicants . . 33 3.Metal Tolerance in Laboratory Strains . . . 34 Present address: Department.K. I. Introduction . . . . . . . . . . . 2 I1. Ecology of Metal Tolerance . . . . . . . . . 4 A

Antonovics, Janis

489

Turbulent convection in liquid metal with and without rotation  

E-Print Network (OSTI)

is the efficiency of convective heat transfer (Nu). In general, we find that the convective behavior of liquid metal=ðkT�, where q is total heat flux and k is the fluid's thermal conductivity. Heat flux q is total heat power P by turbulent, rotating convection in liquid metal. Liquid metals are peculiar in that they diffuse heat more

490

EA-1919: Recycle of Scrap Metals Originating from Radiological Areas  

Energy.gov (U.S. Department of Energy (DOE))

This Programmatic EA evaluates alternatives for the management of scrap metal originating from DOE radiological control areas, including the proposed action to allow for the recycle of uncontaminated scrap metal that meets the requirements of DOE Order 458.1. (Metals with volumetric radioactive contamination are not included in the scope of this Programmatic EA.)

491

Sidewall containment of liquid metal with horizontal alternating magnetic fields  

DOE Patents (OSTI)

An apparatus is disclosed for confining molten metal with a horizontal alternating magnetic field. In particular, this invention employs a magnet that can produce a horizontal alternating magnetic field to confine a molten metal at the edges of parallel horizontal rollers as a solid metal sheet is cast by counter-rotation of the rollers. 19 figs.

Praeg, W.F.

1995-01-31T23:59:59.000Z

492

Dilution and microsegregation in dissimilar metal welds between super austenitic  

E-Print Network (OSTI)

Dilution and microsegregation in dissimilar metal welds between super austenitic stainless steel the weld will also signi® cantly affect the corrosion resistance. Dissimilar metal welds between a super dissimilar weld. The dilution level was found to decrease as the ratio of volumetric ® ller metal feedrate

DuPont, John N.

493

Tons of Heavy Metals in Mill Creek Sediments Heather Freeman  

E-Print Network (OSTI)

objectives for this summer research were to: 1.) determine how much heavy metal pollution has accumulatedTons of Heavy Metals in Mill Creek Sediments Heather Freeman 8/30/99 Geology Department Advisors: Dr. Kees DeJong Dr. Barry Manyard Dr. David Nash #12;Tons of heavy metals in Mill Creek sediments

Maynard, J. Barry

494

REVIEW ARTICLE Heavy Metal Pollutants and Chemical Ecology: Exploring  

E-Print Network (OSTI)

REVIEW ARTICLE Heavy Metal Pollutants and Chemical Ecology: Exploring New Frontiers Robert S. Boyd to be learned about how heavy metal pollution impacts organisms, and that exciting new research frontiers as pollutants (Han et al. 2002), including Cd, Cu, Cr, Hg, Pb, Ni, and Zn. Much research on heavy metal

Boyd, Robert S.

495

Enrichment of Heavy Metals in Sediment Resulting from Soil  

E-Print Network (OSTI)

, Harpenden, Hertfordshire AL5 2JQ, U.K. Heavy metal pollution of soil and water is often associatedEnrichment of Heavy Metals in Sediment Resulting from Soil Erosion on Agricultural Fields J O H N N concentrations of these heavy metals were up to 3.98 times higher in the sediment than in the parent soil

Quinton, John

496

Emerging Applications of Liquid Metals Featuring Surface Oxides  

Science Journals Connector (OSTI)

Figure 4. 3D printing of free-standing liquid metal structures. ... Ladd, C.; So, J.-H.; Muth, J.; Dickey, M. D.3D Printing of Free Standing Liquid Metal Microstructures Adv. ... 3D Printing of Free Standing Liquid Metal Microstructures ...

Michael D. Dickey

2014-10-06T23:59:59.000Z

497

Procedure for Cleaning Bottles for Trace Metal Analysis Initial cleaning  

E-Print Network (OSTI)

Procedure for Cleaning Bottles for Trace Metal Analysis Initial cleaning: Supplies LDPE 60ml bottles (nalgene) ACS grade Hydrochloric acid Trace metal grade nitric acid Day 1 1. Submerge 60ml bottles for up to three uses) 2. Rinse 3x in milli-q (DI) water 3. Fill bottles with 2% trace metal grade nitric

Paytan, Adina

498

A Green Technology to Mine Valuable Metals Biomining Laboratory  

E-Print Network (OSTI)

Biomining: A Green Technology to Mine Valuable Metals Biomining Laboratory Department of Chemistry valuable metals from ores and mine tailings with the assistance of microorganisms. It is a very low capital in the pyrometallurgical technologies are forcing mining companies to examine alternative metal-extractive procedures

Appanna, Vasu

499

Microwave rectification of the current at the metal-metal junction for dilute two-dimensional metals  

Science Journals Connector (OSTI)

Within a quasiclassical transport theory for two-dimensional (2D) electron system, we analyze a recently observed effect of microwave rectification at the boundary between two 2D metals of different carrier densities. A nonlinear response is employed to explain the effect. It is shown that the effect of rectification arises due to the inhomogeneity of the electron density, which breaks the space symmetry of the system. The results agree with the above-noted experiments.

Natalya A. Zimbovskaya

2003-09-12T23:59:59.000Z

500

Aerogel-Coated Metal Nanoparticle Colloids as Novel Entities for the Synthesis of Defined Supported Metal Catalysts  

Science Journals Connector (OSTI)

Aerogel-Coated Metal Nanoparticle Colloids as Novel Entities for the Synthesis of Defined Supported Metal Catalysts ... Nanometer metal particles of tailored size (3?5 nm) and composition prepared via inverse microemulsion were encapsulated by ultrathin coatings (aerogels covered with surface ?OH groups. ... Thus, the product and technology described may be suitable to synthesize these precursor entities of defined metal sizes (as inks) for wash coat/impregnation applications in catalysis. ...

Kai Man K. Yu; Connie M. Y. Yeung; David Thompsett; Shik Chi Tsang

2003-04-10T23:59:59.000Z