Sample records for mesa top pv

  1. Mesa Top Photovoltaic Array (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-07-01T23:59:59.000Z

    Fact sheet overview of the Mesa Top Photovoltaic Array project implemented by the Department of Energy Golden Office and National Renewable Energy Laboratory.

  2. Mesa Top Photovoltaic Array SyStem SpecificationS

    E-Print Network [OSTI]

    Mesa Top Photovoltaic Array SyStem SpecificationS System size: 750 kW (DC, estimated) Characteristics: Single axis tracker photovoltaics, ground mounted Annual output: 1,200 MWh Location: Top of South Table Mountain; NREL Campus; Golden, Colorado Start of operation: Spring 2008 financial terms System

  3. NREL Mesa Top PV System | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasoleTremor(Question) |Renewable Energy |

  4. NREL PV Projects - FUPWG Meeting: "Going Coastal for Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PV Projects FUPWG Meeting: "Going Costal for Energy Efficiency" Bob Westby, NREL FEMP Program Manager and Sustainable NREL Lead April 14-16, 2008 Contents * Mesa Top PV project -...

  5. 94 IAEI NEWS November.December 2008 www.iaei.org a top to bottom perspective on a pv system

    E-Print Network [OSTI]

    Johnson, Eric E.

    94 IAEI NEWS November.December 2008 www.iaei.org a top to bottom perspective on a pv system P in the "Perspectives on PV" series of articles. In this article and the next few articles in the series, let's start at the "bottom." A utility-interactive PV system is a series-connected system, so where we start is not important

  6. Sandia Energy - PV Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid IntegrationOffshore Wind RD&D:PV

  7. Uncompahgre Mesas Forest Restoration Project

    E-Print Network [OSTI]

    March 2010 Uncompahgre Mesas Forest Restoration Project Collaboration Case Study #12;Uncompahgre Mesas Forest Restoration Project 1 1 Colorado Forest Restoration Institute Collaboration Case Study at Colorado State University, to conduct case studies of two collaborative forest health efforts

  8. Sandia Energy - PV Program Disclaimer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid IntegrationOffshore Wind RD&D:PV ModelingProgram

  9. Sandia National Laboratories: Mesa del Sol

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mesa del Sol Mesa del Sol Project Is Finalist for International Smart Grid Action Network 2014 Award of Excellence On July 31, 2014, in Distribution Grid Integration, Energy,...

  10. Supported PV module assembly

    DOE Patents [OSTI]

    Mascolo, Gianluigi; Taggart, David F.; Botkin, Jonathan D.; Edgett, Christopher S.

    2013-10-15T23:59:59.000Z

    A supported PV assembly may include a PV module comprising a PV panel and PV module supports including module supports having a support surface supporting the module, a module registration member engaging the PV module to properly position the PV module on the module support, and a mounting element. In some embodiments the PV module registration members engage only the external surfaces of the PV modules at the corners. In some embodiments the assembly includes a wind deflector with ballast secured to a least one of the PV module supports and the wind deflector. An array of the assemblies can be secured to one another at their corners to prevent horizontal separation of the adjacent corners while permitting the PV modules to flex relative to one another so to permit the array of PV modules to follow a contour of the support surface.

  11. Sandia Energy - Mesa del Sol

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid Integration Permalink Gallery Mesa del Sol Project Is

  12. Red Sky with Red Mesa

    ScienceCinema (OSTI)

    None

    2014-06-23T23:59:59.000Z

    The Red Sky/Red Mesa supercomputing platform dramatically reduces the time required to simulate complex fuel models, from 4-6 months to just 4 weeks, allowing researchers to accelerate the pace at which they can address these complex problems. Its speed also reduces the need for laboratory and field testing, allowing for energy reduction far beyond data center walls.

  13. Microsystems & Engineering Sciences Applications (MESA)

    E-Print Network [OSTI]

    adversaries maintaining the safety, security, and use control of our nuclear stockpile. MESA will produce over-qualified MicroElectroMechanical Systems (MEMS) to control the temperature of nanosatellites while functioning of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. SAND 2012-4739P

  14. Sandia National Laboratories: PV Value®

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and PV industry sales staff. For appraisers, the inputs specific to PV in the Residential Green and Energy Efficient Addendum can be used as inputs to PV Value. Valuing a PV...

  15. Energy 101: Solar PV

    SciTech Connect (OSTI)

    None

    2011-01-01T23:59:59.000Z

    Solar photovoltaic (PV) systems can generate clean, cost-effective power anywhere the sun shines. This video shows how a PV panel converts the energy of the sun into renewable electricity to power homes and businesses.

  16. Energy 101: Solar PV

    ScienceCinema (OSTI)

    None

    2013-05-29T23:59:59.000Z

    Solar photovoltaic (PV) systems can generate clean, cost-effective power anywhere the sun shines. This video shows how a PV panel converts the energy of the sun into renewable electricity to power homes and businesses.

  17. Impact of increased penetration of wind and PV solar resources on the

    E-Print Network [OSTI]

    to the BES through a power electronic inverter · Residential roof top PV solar also has an inverter whichImpact of increased penetration of wind and PV solar resources on the bulk power system Vijay;Wind and PV solar grid interface · Modern wind turbine generators are typically rated between 1.5 MW

  18. PV Validation and Bankability Workshop

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Venture Capitalists, Manufacturers, System Integrators, Consumers * What: PV Cells, PVCPV modules, inverters, balance of system hardware, PV system, installation * What:...

  19. Sandia Energy - PV Modeling & Analysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid IntegrationOffshore Wind RD&D:PV Modeling &

  20. Sandia Energy - PV Value®

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid IntegrationOffshore Wind RD&D:PVReliabilitySystemsPV

  1. High Mesa | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEIHesperia, California: Energy Resources Jump to:HidroflotMesa Jump

  2. Red Mesa | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ | Roadmap Jump to:bJumpRed Bank, New Jersey:Mesa Jump to:

  3. MESA Other GFP.xlsx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron 9November 6, In this3,Office ofMENTORJuly 25,MESA

  4. Stabilized PV system

    DOE Patents [OSTI]

    Dinwoodie, Thomas L. (Piedmont, CA)

    2002-12-17T23:59:59.000Z

    A stabilized PV system comprises an array of photovoltaic (PV) assemblies mounted to a support surface. Each PV assembly comprises a PV module and a support assembly securing the PV module to a position overlying the support surface. The array of modules is circumscribed by a continuous, belt-like perimeter assembly. Cross strapping, extending above, below or through the array, or some combination of above, below and through the array, secures a first position along the perimeter assembly to at least a second position along the perimeter assembly thereby stabilizing the array against wind uplift forces. The first and second positions may be on opposite sides on the array.

  5. Fire resistant PV shingle assembly

    DOE Patents [OSTI]

    Lenox, Carl J.

    2012-10-02T23:59:59.000Z

    A fire resistant PV shingle assembly includes a PV assembly, including PV body, a fire shield and a connection member connecting the fire shield below the PV body, and a support and inter-engagement assembly. The support and inter-engagement assembly is mounted to the PV assembly and comprises a vertical support element, supporting the PV assembly above a support surface, an upper interlock element, positioned towards the upper PV edge, and a lower interlock element, positioned towards the lower PV edge. The upper interlock element of one PV shingle assembly is inter-engageable with the lower interlock element of an adjacent PV shingle assembly. In some embodiments the PV shingle assembly may comprise a ventilation path below the PV body. The PV body may be slidably mounted to the connection member to facilitate removal of the PV body.

  6. Sandia National Laboratories: PV

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Photovoltaic Technology and Tour of PV Test Facilities On February 12, 2013, in The Photovoltaics and Distributed Systems Integration Department at Sandia National...

  7. PV Incentive Program

    Broader source: Energy.gov [DOE]

    The New York State Energy Research and Development Authority (NYSERDA) provides an incentive eligible installers for the installation of approved, grid-connected photovoltaic (PV) systems. The base...

  8. Sandia National Laboratories: PV

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Operations and Maintenance Reporting, ... PV Contacts On April 20, 2011, in Photovoltaic and Grid Integration Manager Charles Hanley 505.844.4435 cjhanle at...

  9. Sandia National Laboratories: PV

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    improve photovoltaic (PV) materials efficiency and help make solar electricity cost-competitive with other energy sources. The work builds on Sandia's recent successes...

  10. MESA Products, Inc. MESA Products, Inc. is a small, privately held business

    E-Print Network [OSTI]

    Magee, Joseph W.

    MESA Products, Inc. MESA Products, Inc. is a small, privately held business that designs in underground and submerged structures, such as pipelines and tanks. MESA sells products and materials and production facility are based in Tulsa, Okla.; branch offices are in Houston, Texas; Tallahassee, Fla

  11. PV PLANNER A DESIGN AND

    E-Print Network [OSTI]

    Delaware, University of

    PV PLANNER A DESIGN AND ANALYSIS TOOL FOR BUILDING INTEGRATED SOLAR ELECTRIC SYSTEMS FINAL Center for Energy and Environmental Policy University of Delaware December 2006 #12;#12;PV...............................................................................................................................1 1.2 PV Planner: An Overview

  12. Sandia National Laboratories: PV evaluation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    evaluation PV Plant Performance Technical Briefing Published in PV Power Tech On March 4, 2015, in Computational Modeling & Simulation, Energy, Facilities, News, News & Events,...

  13. Research of PV Application on

    E-Print Network [OSTI]

    Netoff, Theoden

    Research of PV Application on UMore Park Community Design Arch 8563:Getting Blow the Surface Xiaoyu Liu #12;Getting Blow Surface: PV opportunity on the UMore Park 2 Research of PV application on U More community on the aspect of PV application. There are four parts in this report: (1) Introduction of UMore

  14. Sandia National Laboratories: PV

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Model On October 10, 2011, in This Web Demo model is a simplified "player" version of the Photovoltaic Reliability Performance Model (PV-RPM) currently in development at Sandia...

  15. Grid integrated distributed PV (GridPV).

    SciTech Connect (OSTI)

    Reno, Matthew J.; Coogan, Kyle [Georgia Institute of Technology, Atlanta, GA

    2013-08-01T23:59:59.000Z

    This manual provides the documentation of the MATLAB toolbox of functions for using OpenDSS to simulate the impact of solar energy on the distribution system. The majority of the functions are useful for interfacing OpenDSS and MATLAB, and they are of generic use for commanding OpenDSS from MATLAB and retrieving information from simulations. A set of functions is also included for modeling PV plant output and setting up the PV plant in the OpenDSS simulation. The toolbox contains functions for modeling the OpenDSS distribution feeder on satellite images with GPS coordinates. Finally, example simulations functions are included to show potential uses of the toolbox functions. Each function in the toolbox is documented with the function use syntax, full description, function input list, function output list, example use, and example output.

  16. Monday Tuesday Wednesday Thursday Friday Kenigson Hartman Hartman Mesa Kenigson

    E-Print Network [OSTI]

    Rider, Brian

    Havasi Purkis Hower Mesa Limburg Shannon Scherer Nishikawa Liu Stein Pelfrey Blakestad Hower Pelfrey

  17. Open PV Project: Unlocking PV Installation Data (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01T23:59:59.000Z

    This brochure summarizes the Open PV Project, a collaborative effort of government, industry, and the public to compile a comprehensive database of PV installations in the United States. The brochure outlines the purpose and history of the project as well as the main capabilities and benefits of the online Open PV tool. The brochure also introduces how features of the tool are used, and it describes the sources and characteristics of Open PV's data and data collection processes.

  18. Mořller polarimetry with polarized atomic hydrogen at MESA

    SciTech Connect (OSTI)

    Bartolomé, P. Aguar; Aulenbacher, K.; Tyukin, V. [Institut für Kernphysik, Johannes Gutenberg-University, D-55099 Mainz (Germany)

    2013-11-07T23:59:59.000Z

    A new generation of parity violation (PV) electron scattering experiments are planned to be carried out at the Institut für Kernphysik in Mainz. These experiments will be performed at low energies of 100-200 MeV using the new accelerator MESA (Mainz Energy recovering Superconducting Accelerator). One of the main challenges of such experiments is to achieve an accuracy in beam polarization measurements that must be below 0.5%. This very high accuracy can be reached using polarized atomic hydrogen gas, stored in an ultra-cold magnetic trap, as the target for electron beam polarimetry based on Mo/ller scattering. Electron spin-polarized atomic hydrogen can be stored at high densities of 10{sup 16} cm{sup ?2}, over relatively long time periods, in a high magnetic field (8T) and at low temperatures (0.3K). The gradient force splits the ground state of the hydrogen into four states with different energies. Atoms in the low energy states are trapped in the strong magnetic field region whereas the high energy states are repelled and pumped away. The physics of ultra-cold atomic hydrogen in magnetic traps and the status of the Mainz Hydro-Mo/ller project will be presented.

  19. Energy 101: Solar PV | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Solar PV Energy 101: Solar PV Addthis Description Solar photovoltaic (PV) systems can generate clean, cost-effective power anywhere the sun shines. This video shows how a PV panel...

  20. PV System Performance and Standards

    SciTech Connect (OSTI)

    Osterwald, C. R.

    2005-11-01T23:59:59.000Z

    This paper presents a brief overview of the status and accomplishments during fiscal year (FY) 2005 of the Photovoltaic (PV) System Performance and Standards Subtask, which is part of the PV Systems Engineering Project (a joint NREL-Sandia project).

  1. Ukiah Utilities- PV Buydown Program

    Broader source: Energy.gov [DOE]

    Through Ukiah Utilities’ PV Buydown Program, residential and commercial customers are eligible for a $1.40-per-watt AC rebate on qualifying grid-connected PV systems up to a maximum system size of...

  2. Sandia Energy - PV Systems Reliability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Systems Reliability Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics PV Systems Reliability PV Systems ReliabilityCoryne Tasca2015-05-08T03:40:54+00:00...

  3. Transforming PV Installations toward Dispatchable, Schedulable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transforming PV Installations toward Dispatchable, Schedulable Energy Solutions Transforming PV Installations toward Dispatchable, Schedulable Energy Solutions Advanced Energy...

  4. Solar PV and Glare Factsheet

    Broader source: Energy.gov [DOE]

    A common misconception about solar photovoltaic (PV) panels is that they inherently cause or create "too much" glare, posing a nuisance to neighbors and a safety risk for pilots. While solar PV systems can produce glare, light absorption - rather than reflection - is central to the function of solar PV panels. This fact sheet describes the basic issues surrounding glare from solar PV panels, the new Federal Aviation Administration guidance, and the implications for local governments.

  5. Testing for PV Reliability (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Bansal, S.

    2014-09-01T23:59:59.000Z

    The DOE SUNSHOT workshop is seeking input from the community about PV reliability and how the DOE might address gaps in understanding. This presentation describes the types of testing that are needed for PV reliability and introduces a discussion to identify gaps in our understanding of PV reliability testing.

  6. Considerations for PV Site Surveys

    E-Print Network [OSTI]

    Johnson, Eric E.

    array. #12;Conductor Routing & Inverter Location The location of the inverter in relation to the PV of the conductors between the PV array and the inverter, and between the inverter and the AC load centerConsiderations for PV Site Surveys John Wiles Sponsored by the U.S. Department of Energy this loss

  7. Sandia Energy - Photovoltaic (PV) Regional Test Center (RTC) Website Goes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid IntegrationOffshoreLive Photovoltaic (PV) Regional

  8. Sandia Energy - Photovoltaic Regional Testing Center (PV RTC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid IntegrationOffshoreLive Photovoltaic (PV)

  9. Sandia Energy - Sandia PV Team Publishes Book Chapter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution GridDocuments HomeDatabase on Engine FuelAcademy ofPV Team

  10. Sandia Energy - PV Performance Modeling Collaborative's New and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid IntegrationOffshore Wind RD&D:PV Modeling

  11. Berkeley Program Offers New Option for Financing Residential PV Systems

    E-Print Network [OSTI]

    Bolinger, Mark A

    2009-01-01T23:59:59.000Z

    Vehicle for Residential PV Installations: Opportunities andfor Financing Residential PV Systems Mark Bolinger, Lawrencefor residential photovoltaic (PV) systems. Though financing

  12. Characterizing Shading Losses on Partially Shaded PV Systems (Presentation)

    SciTech Connect (OSTI)

    Deline, C.

    2010-09-23T23:59:59.000Z

    Presentation on shaded PV power loss, practical issues with modeling shaded PV, and methods of implementing partially shaded PV modeling.

  13. Full Steam Ahead for PV in US Homes?

    E-Print Network [OSTI]

    Bolinger, Mark A

    2009-01-01T23:59:59.000Z

    Full Steam Ahead for PV in US Homes? Mark Bolinger, Galenutility-scale photovoltaic (PV) installations in the yearsimplications for PV rebate program administrators, PV system

  14. Sandia Energy - PV Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid IntegrationOffshore Wind RD&D:PVReliability

  15. PV Fact Sheets Argument B1Some people state that "The external costs of PV electricity

    E-Print Network [OSTI]

    PV Fact Sheets Argument B1Some people state that "The external costs of PV electricity is much and the low one to thin-film cadmium telluride PV systems. Fossil fuel power plants PV displaces. 5.8 External

  16. Sandia National Laboratories: PV Reliability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reliability Sandia Research on PV Arc-Fault Detection Submitted for US Patent On March 4, 2015, in Computational Modeling & Simulation, Energy, Facilities, News, News & Events,...

  17. Outdoor PV Degradation Comparison

    SciTech Connect (OSTI)

    Jordan, D. C.; Smith, R. M.; Osterwald, C. R.; Gelak, E.; Kurtz, S. R.

    2011-02-01T23:59:59.000Z

    As photovoltaic (PV) penetration of the power grid increases, it becomes vital to know how decreased power output; may affect cost over time. In order to predict power delivery, the decline or degradation rates must be determined; accurately. At the Performance and Energy Rating Testbed (PERT) at the Outdoor Test Facility (OTF) at the; National Renewable Energy Laboratory (NREL) more than 40 modules from more than 10 different manufacturers; were compared for their long-term outdoor stability. Because it can accommodate a large variety of modules in a; limited footprint the PERT system is ideally suited to compare modules side-by-side under the same conditions.

  18. Chupadera Mesa, New Mexico, Site Fact Sheet

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7111A Lithologic andRECORD OFChupadera Mesa, New

  19. Mesa, Arizona: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose Bend <StevensMcClellan,II JumpMepsolar AGVaporMerlinAurora,Mesa,

  20. Sandia Energy » Mesa del Sol

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementingnpitche Home About npitche This authorEnergyTeachesSandia'sMesa del

  1. Modelling PV Deployment: A Tool Developed at CEEP to

    E-Print Network [OSTI]

    Delaware, University of

    ............................................. 6 Figure 3: PV Planner© Simulation of PV Impact on Building Electric Load Profile

  2. Sandia National Laboratories: Mesa del Sol Project Is Finalist...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News, News & Events, Partnership, Photovoltaic, Renewable Energy, SMART Grid, Solar, Systems Analysis, Systems Engineering The microgrid powers Mesa del Sol's Aperture...

  3. PV Value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOilNEWResponse(Expired) | DepartmentINLDepartmentPV Value PV Value PV

  4. Pressure-equalizing PV assembly and method

    DOE Patents [OSTI]

    Dinwoodie, Thomas L.

    2004-10-26T23:59:59.000Z

    Each PV assembly of an array of PV assemblies comprises a base, a PV module and a support assembly securing the PV module to a position overlying the upper surface of the base. Vents are formed through the base. A pressure equalization path extends from the outer surface of the PV module, past the PV module, to and through at least one of the vents, and to the lower surface of the base to help reduce wind uplift forces on the PV assembly. The PV assemblies may be interengaged, such as by interengaging the bases of adjacent PV assemblies. The base may include a main portion and a cover and the bases of adjacent PV assemblies may be interengaged by securing the covers of adjacent bases together.

  5. PV module mounting method and mounting assembly

    DOE Patents [OSTI]

    Lenox, Carl J.S.; Johnson, Kurt M.

    2013-04-23T23:59:59.000Z

    A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

  6. Gulf Power- Solar PV Program

    Broader source: Energy.gov [DOE]

    '''''All funding has currently been reserved and new applications are no longer being accepted. See Gulf Power's [http://www.gulfpower.com/renewable/solarElectricity.asp Solar PV] web site for more...

  7. 2014 PV Performance Modeling Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2014 PV Performance Modeling Workshop Photo courtesy of Sempra Energy 8:00 AM to 9:00 PM Monday, May 5, 2014 At Biltmore Hotel, Santa Clara, California 512014 Agenda: Start Time...

  8. Connecticut Rooftop Solar PV Permitting Guide

    Broader source: Energy.gov [DOE]

    The Connecticut Rooftop Solar PV Permitting Guide is a compilation of best practices and resources for solar PV permitting. The guide includes a summary of current codes and regulations affecting solar PV, best practices for streamlining the municipal permitting process, and tools to assist municipalities in creating a streamlined permit process for residential solar PV. Resources include a solar PV permit application, a structural review worksheet, an inspection checklist, and a model solar zoning ordinance.

  9. PSCAD Modules Representing PV Generator

    SciTech Connect (OSTI)

    Muljadi, E.; Singh, M.; Gevorgian, V.

    2013-08-01T23:59:59.000Z

    Photovoltaic power plants (PVPs) have been growing in size, and the installation time is very short. With the cost of photovoltaic (PV) panels dropping in recent years, it can be predicted that in the next 10 years the contribution of PVPs to the total number of renewable energy power plants will grow significantly. In this project, the National Renewable Energy Laboratory (NREL) developed a dynamic modeling of the modules to be used as building blocks to develop simulation models of single PV arrays, expanded to include Maximum Power Point Tracker (MPPT), expanded to include PV inverter, or expanded to cover an entire PVP. The focus of the investigation and complexity of the simulation determines the components that must be included in the simulation. The development of the PV inverter was covered in detail, including the control diagrams. Both the current-regulated voltage source inverter and the current-regulated current source inverter were developed in PSCAD. Various operations of the PV inverters were simulated under normal and abnormal conditions. Symmetrical and unsymmetrical faults were simulated, presented, and discussed. Both the three-phase analysis and the symmetrical component analysis were included to clarify the understanding of unsymmetrical faults. The dynamic model validation was based on the testing data provided by SCE. Testing was conducted at SCE with the focus on the grid interface behavior of the PV inverter under different faults and disturbances. The dynamic model validation covers both the symmetrical and unsymmetrical faults.

  10. Federal Tax Incentives for PV: Potential Implications for Program Design

    E-Print Network [OSTI]

    Wiser, Ryan; Bolinger, Mark

    2006-01-01T23:59:59.000Z

    Forthcoming. “EPAct 2005’s PV Tax Credits: What Are TheyAssumptions • Installed PV system costs exhibit economies ofFederal Tax Incentives for PV Potential Implications for

  11. Sandia National Laboratories: European PV Solar Energy Conference...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PV Solar Energy Conference and Exhibition Sandian Presents on PV Failure Analysis at European PV Solar Energy Conference and Exhibition (EU PVSC) On December 15, 2014, in...

  12. Sandia National Laboratories: Sandian Presents on PV Failure...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modeling & SimulationSandian Presents on PV Failure Analysis at European PV Solar Energy Conference and Exhibition (EU PVSC) Sandian Presents on PV Failure Analysis...

  13. Top Innovative Science of 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesisAppliances » Top Innovative Science of 2013

  14. Top Science News of 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesisAppliances » Top Innovative Science of 2013

  15. Top Ten Innovations of 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesisAppliances » Top Innovative Science of 2013

  16. Comparison of Pyranometers vs. PV Reference Cells for Evaluation of PV Array Performance

    SciTech Connect (OSTI)

    Dunn, L.; Gostein, M.; Emery, K.

    2012-09-01T23:59:59.000Z

    As the photovoltaics (PV) industry has grown, the need for accurately monitoring the solar resource of PV power plants has increased. Historically, the PV industry has relied on thermopile pyranometers for irradiance measurements, and a large body of historical irradiance data taken with pyranometers exists. However, interest in PV reference devices is increasing. In this paper, we discuss why PV reference devices are better suited for PV applications, and estimate the typical uncertainties in irradiance measurements made with both pyranometers and PV reference devices. We assert that the quantity of interest in monitoring a PV power plant is the equivalent irradiance under the IEC 60904-3 reference solar spectrum that would produce the same electrical response in the PV array as the incident solar radiation. For PV-plant monitoring applications, we find the uncertainties in irradiance measurements of this type to be on the order of +/-5% for thermopile pyranometers and +/-2.4% for PV reference devices.

  17. PV Systems | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorthOlympiaAnalysis) Jump to:PUD No 1 ofPV Solar PlanetPV

  18. additional east mesa: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spring 2011 Purpose: This research project. The case project for this evaluation is a 1970's barn on the northeast side of Rio Mesa Center. Methods: This research will include...

  19. Webinar: Evaluating Roof Structures for Solar PV

    Broader source: Energy.gov [DOE]

    This webinar provides an overview of Connecticut's Structural Review Worksheet for Residential Rooftop Solar PV Systems. The webinar explains how the worksheet should be used and common concerns with wind and dead loads for rooftop solar PV.

  20. City of Sunset Valley- PV Rebate Program

    Broader source: Energy.gov [DOE]

    The City of Sunset Valley offers rebates to local homeowners who install photovoltaic (PV) systems on their properties. The local rebate acts as an add-on to the PV rebates that are offered by...

  1. City of Palo Alto Utilities- PV Partners

    Broader source: Energy.gov [DOE]

    The City of Palo Alto Utilities (CPAU) PV Partners Program offers incentives to customers that install qualifying PV systems. The program, which has a budget of approximately $13 million over 10...

  2. City of Healdsburg- PV Incentive Program

    Broader source: Energy.gov [DOE]

    Through the City of Healdsburg's PV Buy-down Program, residential and commercial customers are eligible for rebate on qualifying grid-connected PV systems. In keeping with SB1, (the California...

  3. Developing Market Opportunities for Flexible Rooftop Applications of PV Using Flexible CIGS Technology: Market Considerations

    SciTech Connect (OSTI)

    Sabnani, L.; Skumanich, A.; Ryabova, E.; Noufi, R.

    2011-01-01T23:59:59.000Z

    There has been a recent upsurge in developments for building-integrated phototovoltaics (BiPV) roof top materials based on CIGS. Several new companies have increased their presence and are looking to bring products to market for this application in 2011. For roof-top application, there are significant key requirements beyond just having good conversion efficiency. Other attributes include lightweight, as well as moisture-proof, and fully functionally reliable. The companies bringing these new BIPV/BAPV products need to ensure functionality with a rigorous series of tests, and have an extensive set of 'torture' tests to validate the capability. There is a convergence of form, aesthetics, and physics to ensure that the CIGS BiPV deliver on their promises. This article will cover the developments in this segment of the BiPV market and delve into the specific tests and measurements needed to characterize the products. The potential market sizes are evaluated and the technical considerations developed.

  4. November 21, 2000 PV Lesson Plan 3 PV Array Generating Electricity

    E-Print Network [OSTI]

    Oregon, University of

    November 21, 2000 PV Lesson Plan 3 ­ PV Array Generating Electricity Prepared for the Oregon in Arrays: Solar Cells Generating Electricity Lesson Plan Content: In this lesson, students will learn about electricity. Objectives: Students will learn to use a tool called PV WATTS to calculate the output of PV

  5. A Monolithic Microconcentrator Receiver For A Hybrid PV-Thermal System: Preliminary Performance

    E-Print Network [OSTI]

    ://solar.anu.edu.au Abstract: An innovative hybrid PV-thermal microconcentrator (MCT) system is being jointly developed by Chromasun Inc., San Jose, California, and at the Centre for Sustainable Energy Systems, Australian National University. The MCT aims to develop the small-scale, roof-top market for grid-integrated linear CPV systems

  6. City of Anaheim This page outlines solar PV incentives, financing mechanisms, permitting process, and

    E-Print Network [OSTI]

    a contract. Back to Top Financing Information Federal Solar Incentives o Residential Renewable Energy TaxCity of Anaheim This page outlines solar PV incentives, financing mechanisms, permitting process | Incentives | Permitting | Interconnection Contact Information City of Anaheim Building Division 200 S

  7. Solar Resource and PV Systems Performance

    E-Print Network [OSTI]

    Solar Resource and PV Systems Performance at Selected Test Sites Prepared for the U.S. Department Subtask 11.1 Deliverables 2 and 4: Report on Solar Resource and PV Systems Performance at Selected Test agency thereof. #12;1 Solar Resource and PV Systems Performance at Selected Test Sites Contents 1

  8. PV Odds & Ends by John Wiles

    E-Print Network [OSTI]

    Johnson, Eric E.

    PV Odds & Ends by John Wiles Sponsored by the U.S. Department of Energy There are two primary wiring methods for connecting PV modules together--using exposed single-conductor cables, and using conduits. Each dictates a different grounding method, but in either case, PV modules must always

  9. Analysis and Design of Smart PV Module 

    E-Print Network [OSTI]

    Mazumdar, Poornima

    2012-12-10T23:59:59.000Z

    This thesis explores the design of a smart photovoltaic (PV) module- a PV module in which PV cells in close proximity are electrically grouped to form a pixel and are connected to dc-dc converter blocks which reside embedded in the back pane...

  10. Analysis and Design of Smart PV Module

    E-Print Network [OSTI]

    Mazumdar, Poornima

    2012-12-10T23:59:59.000Z

    This thesis explores the design of a smart photovoltaic (PV) module- a PV module in which PV cells in close proximity are electrically grouped to form a pixel and are connected to dc-dc converter blocks which reside embedded in the back pane...

  11. Grid Integrated Distributed PV (GridPV) Version 2.

    SciTech Connect (OSTI)

    Reno, Matthew J.; Coogan, Kyle

    2014-12-01T23:59:59.000Z

    This manual provides the documentation of the MATLAB toolbox of functions for using OpenDSS to simulate the impact of solar energy on the distribution system. The majority of the functio ns are useful for interfacing OpenDSS and MATLAB, and they are of generic use for commanding OpenDSS from MATLAB and retrieving information from simulations. A set of functions is also included for modeling PV plant output and setting up the PV plant in th e OpenDSS simulation. The toolbox contains functions for modeling the OpenDSS distribution feeder on satellite images with GPS coordinates. Finally, example simulations functions are included to show potential uses of the toolbox functions. Each function i n the toolbox is documented with the function use syntax, full description, function input list, function output list, example use, and example output.

  12. How sharp are PV measures?

    E-Print Network [OSTI]

    A. Jencova; S. Pulmannova

    2007-01-11T23:59:59.000Z

    Properties of sharp observables (normalized PV measures) in relation to smearing by a Markov kernel are studied. It is shown that for a sharp observable $P$ defined on a standard Borel space, and an arbitrary observable $M$, the following properties are equivalent: (a) the range of $P$ is contained in the range of $M$; (b) $P$ is a function of $M$; (c) $P$ is a smearing of $M$.

  13. Sandia Energy - PV Systems Reliability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid IntegrationOffshore Wind RD&D:PVReliabilitySystems

  14. PV output smoothing with energy storage.

    SciTech Connect (OSTI)

    Ellis, Abraham; Schoenwald, David Alan

    2012-03-01T23:59:59.000Z

    This report describes an algorithm, implemented in Matlab/Simulink, designed to reduce the variability of photovoltaic (PV) power output by using a battery. The purpose of the battery is to add power to the PV output (or subtract) to smooth out the high frequency components of the PV power that that occur during periods with transient cloud shadows on the PV array. The control system is challenged with the task of reducing short-term PV output variability while avoiding overworking the battery both in terms of capacity and ramp capability. The algorithm proposed by Sandia is purposely very simple to facilitate implementation in a real-time controller. The control structure has two additional inputs to which the battery can respond. For example, the battery could respond to PV variability, load variability or area control error (ACE) or a combination of the three.

  15. PV prospects: thinPV prospects: thin--film cellsfilm cells Si cell costs

    E-Print Network [OSTI]

    Pulfrey, David L.

    1 PV prospects: thinPV prospects: thin--film cellsfilm cells LECTURE 8 · Si cell costs · optimizing://www.solarbuzz.com/Moduleprices.htm #12;6 Cost of PV modulesCost of PV modules The lowest retail price for a multicrystalline silicon for a monocrystalline silicon module is $1.48 per watt (1.04 per watt), from an Asian retailer. Brand, technical

  16. Ensuring Quality of PV Modules: Preprint

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Hacke, P.; Kempe, M.; Sample, T.; Yamamichi, M.; Kondo, M.; Doi, T.; Otani, K.; Amano, J.

    2011-07-01T23:59:59.000Z

    Photovoltaic (PV) customers need to have confidence in the PV modules they purchase. Currently, no test can quantify a module's lifetime with confidence, but stress tests are routinely used to differentiate PV product designs. We suggest that the industry would be strengthened by using the wisdom of the community to develop a single set of tests that will help customers quantify confidence in PV products. This paper evaluates the need for quality assurance (QA) standards and suggests a path for creating these. Two types of standards are needed: 1) QA of the module design and 2) QA of the manufacturing process.

  17. Sandia National Laboratories: improving PV performance model...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    accuracy PV Performance Modeling Collaborative's New and Improved Website Is Launched On December 10, 2014, in Computational Modeling & Simulation, Energy, Facilities, News, News &...

  18. Sandia National Laboratories: improving PV performance model...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    technical rigor PV Performance Modeling Collaborative's New and Improved Website Is Launched On December 10, 2014, in Computational Modeling & Simulation, Energy, Facilities, News,...

  19. Sandia National Laboratories: PV Performance Modeling Collaborative

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modeling Collaborative PV Performance Modeling Collaborative's New and Improved Website Is Launched On December 10, 2014, in Computational Modeling & Simulation, Energy,...

  20. Updating Interconnection Screens for PV System Integration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Abraham Ellis, Roger Hill Sandia National Laboratories Tom Key, Kristen Nicole, Jeff Smith Electric Power Research Institute Updating Interconnection Screens for PV System...

  1. Lodi Electric Utility- PV Rebate Program

    Broader source: Energy.gov [DOE]

    Lodi Electric Utility offers rebates to its residential, commercial, industrial and municipal customers who install photovoltaic (PV) systems. The rebate program is funded with approximately $6...

  2. CPS Energy- Solar PV Rebate Program

    Broader source: Energy.gov [DOE]

    CPS Energy, San Antonio's municipal utility, offers rebates to customers who install solar photovoltaic (PV) systems on their homes, schools, or businesses. There are four rebate "tiers" available...

  3. Lassen Municipal Utility District- PV Rebate Program

    Broader source: Energy.gov [DOE]

    Lassen Municipal Utility District (LMUD) is providing incentives for its customers to purchase solar electric photovoltaic (PV) systems. Rebate levels will decrease annually over the life of the...

  4. Modeling Distribution Connected PV and Interconnection Study...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    load and solar variability Modelling regulator controls Interaction between smart inverters and regulator load drop compensator control 9 Base Case With PV Percent Change...

  5. Sandia National Laboratories: PV-Tech magazine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Newsletter, SunShot, Systems Analysis Sandia researcher Joshua Stein (in Sandia's Photovoltaic & Distributed Systems Integration Dept.) highlighted novel PV array...

  6. Sandia National Laboratories: PV array monitoring strategies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Newsletter, SunShot, Systems Analysis Sandia researcher Joshua Stein (in Sandia's Photovoltaic & Distributed Systems Integration Dept.) highlighted novel PV array...

  7. Sandia National Laboratories: PV Performance Modeling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photovoltaic, Photovoltaic Systems Evaluation Laboratory (PSEL), Renewable Energy, Solar, Solar Newsletter, SunShot The state of the art in PV system monitoring is relatively...

  8. Sandia National Laboratories: organic PV materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    organic PV materials Sandians Win 'Best Paper' Award at Photovoltaic Conference in Japan On March 4, 2015, in Computational Modeling & Simulation, Energy, Facilities, News, News &...

  9. Sandia National Laboratories: increase PV deployment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PV deployment ECIS-Princeton Power Systems, Inc.: Demand Response Inverter On March 19, 2013, in DETL, Distribution Grid Integration, Energy, Energy Surety, Facilities, Grid...

  10. Sandia National Laboratories: flexible PV substrate

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PV substrate Sandia, Endicott Interconnect Technologies, EMCORE, International Micro Industries, NREL, Universal Instruments: Solar Glitter On March 21, 2013, in Capabilities,...

  11. AC PV Modules Take a standard DC PV module and connect a microinverter

    E-Print Network [OSTI]

    Johnson, Eric E.

    , and secure a listing to UL1741 for a pre-assembled module/inverter device, and you have an AC PV module No discussion of PV systems would be complete without a look at the newest inverter technologies that installers Most grid-tied inverters are "string inverters"--they operate with a string of series-connected PV

  12. NREL: Photovoltaics Research - PV News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit |Infrastructure John Wohlgemuth,News ThePV News The

  13. Kenmos PV | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetecGtelInteriasIowa: EnergyKanabecKenduskeag, Maine: EnergyNewKenmos PV Jump

  14. PV | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri:EnergyOssian, New York:Ozark, Alabama:ASES 2003,PUD No 1PUD No 2PVCoPV

  15. PV Trackers | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorthOlympiaAnalysis) Jump to:PUD No 1 ofPV Solar

  16. Sunshine PV | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f <Maintained By FaultSunpods Inc Jump to: navigation, searchSunrayPV

  17. Summary Review of Advanced Inverter Technologies for Residential PV Systems

    E-Print Network [OSTI]

    Summary Review of Advanced Inverter Technologies for Residential PV Systems This report summarizes current and emerging standards for residential PV systems and identifies the status of emerging inverter................................................................................................ 7 3. Grid-Connected PV inverters available in US

  18. Solar PV Permitting and Safety Training Webinar

    Broader source: Energy.gov [DOE]

    This webinar provides training on two permitting resources for municipal inspectors; a prescriptive process for building inspectors and a guidance document for permitting for PV for electrical inspectors. The webinar also runs through a number of key code articles in Massachusetts 2014 electrical code and examines a variety of safety hazards commonly found during or after solar PV installations.

  19. Draft Transcript on Municipal PV Systems

    Broader source: Energy.gov [DOE]

    Webinar on navigating the legal, tax, and finance issues associated with the installation of Municipal PV Systems. The following agenda was developed based on Pat Boylston's experience assisting municipalities with their PV projects and the requests for information that the Solar America City technical team leads have received from many of the 25 Solar America Cities since the April 2008 meeting in Tucson.

  20. PV Integration by Building Energy Management System

    E-Print Network [OSTI]

    Boyer, Edmond

    stands for any variable that could be PV, grid power, or load power if calculation is valid for allPV Integration by Building Energy Management System Rim.Missaouią, Ghaith.Warkozeką, Seddik. BachaLab.grenoble-inp.fr Abstract- This paper focuses on Energy Management System (EMS) applied to the residential sector. The EMS

  1. INTEGRATION OF PV IN DEMAND RESPONSE

    E-Print Network [OSTI]

    Perez, Richard R.

    . It may also be implemented by means of customer-sited emergency power generation (e.g., diesel generators the case that distributed PV generation deserves a substantial portion of the credit allotted to demand response programs. This is because PV generation acts as a catalyst to demand response, markedly enhancing

  2. axonopodis pv passiflorae: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    effective capacity of grid-connected PV power plants. The predicted and actual utility peak load reduction performance of PV power plants are compared for two case studies:...

  3. axonopodis pv citri: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    effective capacity of grid-connected PV power plants. The predicted and actual utility peak load reduction performance of PV power plants are compared for two case studies:...

  4. axonopodis pv malvacearum: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    effective capacity of grid-connected PV power plants. The predicted and actual utility peak load reduction performance of PV power plants are compared for two case studies:...

  5. NREL PV Projects - FUPWG Meeting: "Going Coastal for Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NREL PV Projects - FUPWG Meeting: "Going Coastal for Energy Efficiency" NREL PV Projects - FUPWG Meeting: "Going Coastal for Energy Efficiency" fupwgdestinwestby.pdf More...

  6. SunShot Presentation PV Module Reliabity Workshop Opening Session...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentation PV Module Reliabity Workshop Opening Session SunShot Presentation PV Module Reliabity Workshop Opening Session This PowerPoint slide deck was originally presented at...

  7. Integrating Solar PV into Energy Services Performance Contracts...

    Energy Savers [EERE]

    Integrating Solar PV into Energy Services Performance Contracts: Options for Local Governments Nationwide Integrating Solar PV into Energy Services Performance Contracts: Options...

  8. advanced modular pv: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary Review of Advanced Inverter Technologies for Residential PV Systems Renewable Energy Websites Summary: Summary Review of Advanced Inverter Technologies for Residential PV...

  9. Sandia National Laboratories: PV Performance Analysis and Module...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Performance Analysis and Module Reliability workshop Sandian Presents on PV Failure Analysis at European PV Solar Energy Conference and Exhibition (EU PVSC) On December 15, 2014,...

  10. Low Cost High Concentration PV Systems for Utility Power Generation...

    Energy Savers [EERE]

    Low Cost High Concentration PV Systems for Utility Power Generation Amonix, Inc. Low Cost High Concentration PV Systems for Utility Power Generation Amonix, Inc. A series of brief...

  11. Sandia National Laboratories: Sandia to host PV Bankability workshop...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ClimateECNews & EventsConferencesSandia to host PV Bankability workshop at Solar Power International (SPI) 2013 Sandia to host PV Bankability workshop at Solar Power International...

  12. THE IMPACT OF CITY-LEVEL PERMITTING PROCESSES ON RESIDENTIAL PV INSTALLATION PRICES AND DEVELOPMENT TIMES

    E-Print Network [OSTI]

    Dong, Changgui

    2014-01-01T23:59:59.000Z

    The installed price of photovoltaic (PV) systems hasprice and development time of residential photovoltaic (PV)

  13. Influence of the Blue Mesa Reservoir on the Red Creek Landslide, Colorado

    E-Print Network [OSTI]

    Influence of the Blue Mesa Reservoir on the Red Creek Landslide, Colorado SCOTT R. WALKER URS of the Blue Mesa Reservoir submerged approximately 50 percent of the paleolandslide. Some clay layers within of the paleolandslide. Seasonal rapid drawdown of the Blue Mesa Reservoir acts as the trigger for movement, and large

  14. Pressure-equalizing PV assembly and method | OSTI, US Dept of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pressure-equalizing PV assembly and method Re-direct Destination: Each PV assembly of an array of PV assemblies comprises a base, a PV module and a support assembly securing the PV...

  15. WIPP Receives Top Mine Safety Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfiresImpurity Transport,12,Top Mine Safety Award CARLSBAD,

  16. Supercomputing Challenge top winners: Los Alamos schools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solid ...Success Stories TouchingSupercomputing Challenge top

  17. Terawatt Challenge for Thin-Film PV

    SciTech Connect (OSTI)

    Zweibel, K.

    2005-08-01T23:59:59.000Z

    The evolution of PV into one of the world's largest industries is not going to happen without major unforeseen problems. However, this study attempts to address the obvious ones, so that we can put aside the mythology of PV (for example, that it is only ''boutique power'' or that one must pave the world with it to be useful) and get on with changing the world's energy infrastructure. With the years of rapid market growth now under way in PV, the author is sure this will not be the last effort to understand the real potential and pitfalls of meeting the Challenge.

  18. Solar Works! In Seattle: Introduction to Solar Electric (PV)

    Broader source: Energy.gov [DOE]

    Presentation slides from residential PV workshop. Also covers general solar resource assessment, siting and financial incentives.

  19. Washington City Power- PV Rebate Program

    Broader source: Energy.gov [DOE]

    Washington City offers a rebate of $1,000 per kilowatt-DC (kW-DC) to customers who install photovoltaic (PV) systems or wind-energy systems. The rebate is limited to $3,000 for residential systems...

  20. Pacific Power- PV Rebate Program (California)

    Broader source: Energy.gov [DOE]

    Pacific Power is providing rebates to their customers who install photovoltaic (PV) systems on their homes and facilities. These rebates step down over time as key installation targets are met. As...

  1. Austin Energy- Commercial Solar PV Incentive Program

    Broader source: Energy.gov [DOE]

    In order to qualify for this program, PV modules must be new and be listed on the California Energy Commission's Go Solar web site. In addition, all solar panels must have a 20-year manufacturer ...

  2. Solar Energy International Solar PV 101 Training

    Office of Energy Efficiency and Renewable Energy (EERE)

    Solar Energy International is offering a five-day training that provides an overview of the three basic PV system applications, primarily focusing on grid-direct systems. The goal of the course is...

  3. PV Module Reliability Research (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-06-01T23:59:59.000Z

    This National Center for Photovoltaics sheet describes the capabilities of its PV module reliability research. The scope and core competencies and capabilities are discussed and recent publications are listed.

  4. Distributed PV Permitting and Inspection Processes

    Broader source: Energy.gov [DOE]

    This presentation summarizes case studies of the time and cost involved in the distributed PV permitting and inspection process in three Solar America Cities, Austin, Portland, and Salt Lake City.

  5. Merced Irrigation District- PV Buydown Program

    Broader source: Energy.gov [DOE]

    Merced Irrigation District (MID) offers its residential, commercial and non-profit customers a rebate for installing solar electric photovoltaic (PV) systems on their homes and offices. The rebate...

  6. SMUD- PV Residential Retrofit Buy-Down

    Broader source: Energy.gov [DOE]

    SMUD offers an incentive of $0.20 per watt (W) AC to residential customers who install grid-connected photovoltaic (PV) systems. Customers do not have to contract directly with SMUD-approved...

  7. IID Energy- PV Solutions Rebate Program

    Broader source: Energy.gov [DOE]

    '''''IID accepted applications for the 2013 PV Solutions Program from Jan. 2, 2013 – Jan. 31, 2013. Winners were determined via lottery. The program is now closed for the remainder of 2013, but...

  8. SMUD- Non-Residential PV Incentive Program

    Broader source: Energy.gov [DOE]

    SMUD offers cash incentives to commercial, industrial, and non-profit customers who install solar photovoltaic (PV) systems. Customers have the option of taking a one-time, up-front payment through...

  9. Austin Energy- Residential Solar PV Rebate Program

    Broader source: Energy.gov [DOE]

    Austin Energy's Solar Rebate Program offers a $1.50 per watt incentive to eligible residential who install photovoltaic (PV) systems on their homes. Rebates are limited to $15,000 per home...

  10. Austin Energy- Commercial PV Incentive Program

    Broader source: Energy.gov [DOE]

    Austin Energy, a municipal utility, offers a production incentive to its commercial and multi-family residential customers for electricity generated by qualifying photovoltaic (PV) systems of up to...

  11. Plumas-Sierra REC- PV Rebate Program

    Broader source: Energy.gov [DOE]

    Plumas-Sierra REC offers an incentive for its customers to install photovoltaic (PV) systems on homes and businesses. Rebates are available for qualifying systems between one kilowatt (kW) and 25...

  12. City of Lompoc Utilities- PV Rebate Program

    Broader source: Energy.gov [DOE]

    City of Lompoc Utilities provides rebates to its electric customers who purchase and install photovoltaic (PV) systems. The rebate is $2.00 per watt-AC. The incentive amount may not exceed 50% the...

  13. Präsentation Bernhard Gatzka PV*SOL Expert

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    design and calculation of photovoltaic systems, including grid-connected, off-grid and battery backed-up systems. "Shading Calculation in PV*SOL Expert" presented at the 2013...

  14. Summary of First PV Performance Modeling Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AnalystsOther Steve Ransome Navigant SolarTech Modelers CEC-UW Clean Power King Solar Works PVDesign Pro - Hoes Engineering PV*Sol PVSyst Universities U of Arizona U of...

  15. Power losses in PV arrays due to variations in the I-V characteristics of PV modules

    E-Print Network [OSTI]

    Heinemann, Detlev

    Power losses in PV arrays due to variations in the I-V characteristics of PV modules Wolfgang Damm-V characteristics of the 36 individual modules of a PV generator at the University of Oldenburg were measured the basis for the calculations of the mismatch losses due to series and parallel connection of PV modules

  16. The Effect of PV Array Size and Battery Size on the Economics of PV/Diesel/Battery Hybrid RAPS Systems

    E-Print Network [OSTI]

    array on the performance for a diesel/battery/inverter/pv system. It seeks to determine whetherThe Effect of PV Array Size and Battery Size on the Economics of PV/Diesel/Battery Hybrid RAPS WA 6150 Abstract This paper focuses on pv/diesel/battery hybrid RAPS systems meeting loads above 50 k

  17. PV System Energy Evaluation Method (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.

    2014-01-01T23:59:59.000Z

    This presentation describes a comparison of the "predicted" energy (based on historical weather data) with the "expected" energy (based on the measured weather data) to determine whether a PV system is performing as modeled in order to verify the accuracy of a model. A key factor in defining this energy test is determining the test boundary so that weather variations are not inadvertently included in what is considered to be PV system performance.

  18. PV array simulator development and validation.

    SciTech Connect (OSTI)

    Kuszmaul, Scott S.; Gonzalez, Sigifredo; Lucca, Roberto (Ametek Programmable Power, San Diego, CA); Deuel, Don (Ametek Programmable Power, San Diego, CA)

    2010-06-01T23:59:59.000Z

    The ability to harvest all available energy from a photovoltaic (PV) array is essential if new system developments are to meet levelized cost of energy targets and achieve grid parity with conventional centralized utility power. Therefore, exercising maximum power point tracking (MPPT) algorithms, dynamic irradiance condition operation and startup and shutdown routines and evaluating inverter performance with various PV module fill-factor characteristics must be performed with a repeatable, reliable PV source. Sandia National Laboratories is collaborating with Ametek Programmable Power to develop and demonstrate a multi-port TerraSAS PV array simulator. The simulator will replicate challenging PV module profiles, enabling the evaluation of inverter performance through analyses of the parameters listed above. Energy harvest algorithms have traditionally implemented methods that successfully utilize available energy. However, the quantification of energy capture has always been difficult to conduct, specifically when characterizing the inverter performance under non-reproducible dynamic irradiance conditions. Theoretical models of the MPPT algorithms can simulate capture effectiveness, but full validation requires a DC source with representative field effects. The DC source being developed by Ametek and validated by Sandia is a fully integrated system that can simulate an IV curve from the Solar Advisor Model (SAM) module data base. The PV simulator allows the user to change the fill factor by programming the maximum power point voltage and current parameters and the open circuit voltage and short circuit current. The integrated PV simulator can incorporate captured irradiance and module temperature data files for playback, and scripted profiles can be generated to validate new emerging hardware embedded with existing and evolving MPPT algorithms. Since the simulator has multiple independent outputs, it also has the flexibility to evaluate an inverter with multiple MPPT DC inputs. The flexibility of the PV simulator enables the validation of the inverter's capability to handle vastly different array configurations.

  19. Very low threshold InGaAsP mesa laser

    SciTech Connect (OSTI)

    Chen, T.R.; Chiu, L.C.; Hasson, A.; Koren, U.; Margalit, S.; Yariv, A.; Yu, K.L.

    1983-05-01T23:59:59.000Z

    Very low threshold currents InGaAsP/InP terrace mesa (T-ME) lasers with an unpassivated surface have been fabricated on semi-insulating (SI) InP substrates. Fabrication of the lasers involves a single-step liquid phase epitaxial (LPE) growth and a simple etching process. Lasers operating in the fundamental transverse mode with threshold currents as low as 6.3 mA (for a cavity length of 250 ..mu..m) have been obtained. Comparison between the unpassivated lasers and those passivated using the mass transport technique is described.

  20. La Mesa, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant Jump to: navigation,working-groups < LEDSGP‎LEE Jump to:LNJLXEJolla,Marque,Mesa,

  1. San Juan Mesa Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ |Rippey Jump to:WY)Project JumpSan FranciscoWindMesa Wind

  2. City of Mesa, Arizona (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovationin Urban TransportMartinsville, VirginiaMeade,Mesa, Arizona

  3. South Trent Mesa Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎SolarCity Corp Jumpsource History ViewHolt WindTrent Mesa

  4. Costa Mesa, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformationNew|Core Analysis AtSystems |Costa Mesa, California: Energy

  5. Updating Technical Screens for PV Interconnection: Preprint

    SciTech Connect (OSTI)

    Coddington, M.; Ellis, A.; Lynn, K.; Razon, A.; Key, T.; Kroposki, B.; Mather, B.; Hill, R.; Nicole, K.; Smith, J.

    2012-08-01T23:59:59.000Z

    Solar photovoltaics (PV) is the dominant type of distributed generation (DG) technology interconnected to electric distribution systems in the United States, and deployment of PV systems continues to increase rapidly. Considering the rapid growth and widespread deployment of PV systems in United States electric distribution grids, it is important that interconnection procedures be as streamlined as possible to avoid unnecessary interconnection studies, costs, and delays. Because many PV interconnection applications involve high penetration scenarios, the process needs to allow for a sufficiently rigorous technical evaluation to identify and address possible system impacts. Existing interconnection procedures are designed to balance the need for efficiency and technical rigor for all DG. However, there is an implicit expectation that those procedures will be updated over time in order to remain relevant with respect to evolving standards, technology, and practical experience. Modifications to interconnection screens and procedures must focus on maintaining or improving safety and reliability, as well as accurately allocating costs and improving expediency of the interconnection process. This paper evaluates the origins and usefulness of the capacity penetration screen, offers potential short-term solutions which could effectively allow fast-track interconnection to many PV system applications, and considers longer-term solutions for increasing PV deployment levels in a safe and reliable manner while reducing or eliminating the emphasis on the penetration screen.

  6. East Mesa geothermal pump test facility (EMPTF). Final report

    SciTech Connect (OSTI)

    Olander, R.G.; Roberts, G.K.

    1984-11-28T23:59:59.000Z

    Barber-Nichols has completed the design, fabrication and installation of a geothermal pump test facility at the DOE geothermal site at East Mesa, California which is capable of testing 70 to 750 horsepower downwell pumps in a controlled geothermal environment. The facility consists of a skid-mounted brine control module, a 160 foot below ground test well section, a hydraulic turbine for power recovery, a gantry-mounted hoist for pump handling and a 3-phase, 480 VAC, 1200 amp power supply to handle pump electric requirements. Geothermal brine is supplied to the EMPTF from one of the facility wells at East Mesa. The EMPTF is designed with a great amount of flexibility to attract the largest number of potential users. The 20-inch diameter test well can accommodate a wide variety of pumps. The controls are interactive and can be adjusted to obtain a full complement of pump operation data, or set to maintain constant conditions to allow long-term testing with a minimum of operator support. The hydraulic turbine allows the EMPTF user to recover approximately 46% of the input pump power to help defray the operating cost of the unit. The hoist is provided for material handling and pump servicing and reduces the equipment that the user must supply for pump installation, inspection and removal.

  7. East Mesa geothermal pump test facility (EMPTF). Final report

    SciTech Connect (OSTI)

    Olander, R.G.; Roberts, G.K.

    1984-11-28T23:59:59.000Z

    The design, fabrication and installation of a geothermal pump test facility (EMPFT) at the DOE geothermal site at East Mesa, California which is capable of testing 70 to 750 horsepower downwell pumps in a controlled geothermal environment were completed. The facility consists of a skid-mounted brine control module, a 160 foot below test well section, a hydraulic turbine for power recovery, a gantry-mounted hoist for pump handling and a 3-phase, 480 VAC, 1200 amp power supply to handle pump electric requirements. Geothermal brine is supplied to the EMPTF from one of the facility wells at East Mesa. The EMPTF is designed with a great amount of flexibility. The 20-inch diameter test well can accommodate a wide variety of pumps. The controls are interactive and can be adjusted to obtain a full complement of pump operation data, or set to maintain constant conditions to allow long-term testing with a minimum of operator support. The hydraulic turbine allows the EMPTF user to recover approximately 46% of the input pump power to help defray the operating cost of the unit. The hoist is provided for material handling and pump servicing and reduces the equipment that the user must supply for pump installation, inspection and removal.

  8. An Analysis of Residential PV System Price Differences Between the United States and Germany

    E-Print Network [OSTI]

    Seel, Joachim

    2014-01-01T23:59:59.000Z

    barriers for PV systems in Germany at the national level, PVfor residential PV systems in Germany. Bundesverband derof PV Power Applications in Germany 2006, Exchange and

  9. A Wavelet-Based Variability Model (WVM) for Solar PV Power Plants

    E-Print Network [OSTI]

    Lave, Matthew; Kleissl, Jan; Stein, Joshua S

    2013-01-01T23:59:59.000Z

    Power characteristics of PV ensembles: experiences from theproduction of 100 grid connected PV systems distributed overHoff and R. Perez, "Modeling PV Fleet Output Variability,"

  10. Holdover inoculum of Pseudomonas syringae pv. alisalensis from broccoli raab causes disease in subsequent plantings

    E-Print Network [OSTI]

    Cintas, N A; Koike, S T; Bunch, R A; Bull, C T

    2006-01-01T23:59:59.000Z

    by Pseudomonas syringae pv. alisalensis in California. Plantof Pseudo- monas syringae pv. alisalensis. (Abstr. ) Phyto-2004. Pseudomonas syringae pv. alisalensis and Pseudomonas

  11. Designing PV Incentive Programs to Promote System Performance: A Review of Current Practice

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-01-01T23:59:59.000Z

    Dan. 2006. Best Practices in PV Rebate Programs: Helpingprogram staff. Designing PV Incentive Programs to PromoteGroup), Mike Taylor Designing PV Incentive Programs to

  12. Designing PV Incentive Programs to Promote Performance: A Review of Current Practice

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2007-01-01T23:59:59.000Z

    DESIGNING PV INCENTIVE PROGRAMS TO PROMOTE SYSTEMcustomer-sited photovoltaic (PV) systems, provided throughface to ensuring that their PV systems perform well, and the

  13. Analyzing and simulating the variability of solar irradiance and solar PV powerplants

    E-Print Network [OSTI]

    Lave, Matthew S.

    2012-01-01T23:59:59.000Z

    Analysis of Distributed PV, American Solar Energy Society,Simulating the Reduction in PV Powerplant Variability due to8] T. Hoff, R. Perez, Modeling PV Fleet Output Variability,

  14. An efficient method for visualization and growth of fluorescent Xanthomonas oryzae pv. oryzae in planta.

    E-Print Network [OSTI]

    Han, Sang-Wook; Park, Chang-Jin; Lee, Sang-Won; Ronald, Pamela C

    2008-01-01T23:59:59.000Z

    Background Xanthomonas oryzae pv. oryzae, a yellow-pigmentedsativa L. ) plants. X. oryzae pv. oryzae infection can causetropical Asia [1]. X. oryzae pv. oryzae infects rice leaves

  15. Photovoltaic (PV) Pricing Trends: Historical, Recent, and Near-Term Projections

    E-Print Network [OSTI]

    Feldman, David

    2014-01-01T23:59:59.000Z

    Utility-Scale Photovoltaic (PV) System Prices in the Unitedphotovoltaic (PV) systems has soared in recent years, driven by declining PV prices

  16. A Wavelet-Based Variability Model (WVM) for Solar PV Power Plants

    E-Print Network [OSTI]

    Lave, Matthew; Kleissl, Jan; Stein, Joshua S

    2013-01-01T23:59:59.000Z

    Model (WVM) for Solar PV Power Plants Matthew Lave, Janoutput of a solar photovoltaic (PV) plant was presented andsimulating solar photovoltaic (PV) power plant output given

  17. Approaches To Integrating A HIgh Penertration Of Solar PV and CPV Onto The Electrical Grid

    E-Print Network [OSTI]

    Hill, Steven Craig

    2013-01-01T23:59:59.000Z

    component removal (i.e. inverter, PV panel etc. ) since63  Desired PV Inverter voltage stability. The PV inverter reactive power control

  18. Modules for Experiments in Stellar Astrophysics (MESA): Binaries, Pulsations, and Explosions

    E-Print Network [OSTI]

    Paxton, Bill; Schwab, Josiah; Bauer, Evan B; Bildsten, Lars; Cantiello, Matteo; Dessart, Luc; Farmer, R; Hu, H; Langer, N; Townsend, R H D; Townsley, Dean M; Timmes, F X

    2015-01-01T23:59:59.000Z

    We substantially update the capabilities of the open-source software instrument Modules for Experiments in Stellar Astrophysics (MESA). MESA can now simultaneously evolve an interacting pair of differentially rotating stars undergoing transfer and loss of mass and angular momentum, greatly enhancing the prior ability to model binary evolution. New MESA capabilities in fully coupled calculation of nuclear networks with hundreds of isotopes now allow MESA to accurately simulate advanced burning stages needed to construct supernova progenitor models. Implicit hydrodynamics with shocks can now be treated with MESA, enabling modeling of the entire massive star lifecycle, from pre-main sequence evolution to the onset of core collapse and nucleosynthesis from the resulting explosion. Coupling of the GYRE non-adiabatic pulsation instrument with MESA allows for new explorations of the instability strips for massive stars while also accelerating the astrophysical use of asteroseismology data. We improve treatment of ma...

  19. Top-Down Suppression

    E-Print Network [OSTI]

    Rissman, JA; Zanto, TP

    2015-01-01T23:59:59.000Z

    cortex contribute to top-down modulation of visual2003). Neural mechanisms of top-down control during spatialC. D. , & Li, W. (2013). Top-down influences on visual

  20. PV performance modeling workshop summary report.

    SciTech Connect (OSTI)

    Stein, Joshua S.; Tasca, Coryne Adelle (SRA International, Inc., Fairfax, VA); Cameron, Christopher P.

    2011-05-01T23:59:59.000Z

    During the development of a solar photovoltaic (PV) energy project, predicting expected energy production from a system is a key part of understanding system value. System energy production is a function of the system design and location, the mounting configuration, the power conversion system, and the module technology, as well as the solar resource. Even if all other variables are held constant, annual energy yield (kWh/kWp) will vary among module technologies because of differences in response to low-light levels and temperature. A number of PV system performance models have been developed and are in use, but little has been published on validation of these models or the accuracy and uncertainty of their output. With support from the U.S. Department of Energy's Solar Energy Technologies Program, Sandia National Laboratories organized a PV Performance Modeling Workshop in Albuquerque, New Mexico, September 22-23, 2010. The workshop was intended to address the current state of PV system models, develop a path forward for establishing best practices on PV system performance modeling, and set the stage for standardization of testing and validation procedures for models and input parameters. This report summarizes discussions and presentations from the workshop, as well as examines opportunities for collaborative efforts to develop objective comparisons between models and across sites and applications.

  1. DOE High Performance Concentrator PV Project

    SciTech Connect (OSTI)

    McConnell, R.; Symko-Davies, M.

    2005-08-01T23:59:59.000Z

    Much in demand are next-generation photovoltaic (PV) technologies that can be used economically to make a large-scale impact on world electricity production. The U.S. Department of Energy (DOE) initiated the High-Performance Photovoltaic (HiPerf PV) Project to substantially increase the viability of PV for cost-competitive applications so that PV can contribute significantly to both our energy supply and environment. To accomplish such results, the National Center for Photovoltaics (NCPV) directs in-house and subcontracted research in high-performance polycrystalline thin-film and multijunction concentrator devices with the goal of enabling progress of high-efficiency technologies toward commercial-prototype products. We will describe the details of the subcontractor and in-house progress in exploring and accelerating pathways of III-V multijunction concentrator solar cells and systems toward their long-term goals. By 2020, we anticipate that this project will have demonstrated 33% system efficiency and a system price of $1.00/Wp for concentrator PV systems using III-V multijunction solar cells with efficiencies over 41%.

  2. Single top and top pair production

    E-Print Network [OSTI]

    Nikolaos Kidonakis

    2012-12-12T23:59:59.000Z

    I present results for single-top and top-pair production at the LHC and the Tevatron. Higher-order two-loop corrections are used to achieve NNLL resummation, which is then used to derive NNLO soft-gluon corrections. Results are presented for total cross sections, top transverse momentum distributions, and top rapidity distributions. All results are in excellent agreement with data from the LHC and the Tevatron. I also clarify the differences between various methods in top-pair production and their relation to exact NNLO results.

  3. Archaeological investigations on the Buckboard Mesa Road Project

    SciTech Connect (OSTI)

    Amick, D.S.; Henton, G.H.; Pippin, L.C.

    1991-10-01T23:59:59.000Z

    In 1986, the Desert Research Institute (DRI) conducted an archaeological reconnaissance of a new alignment for the Buckboard Mesa Road on the Nevada Test Site for the Department of Energy (DOE). During this reconnaissance, several archaeological sites of National Register quality were discovered and recorded including a large quarry, site 26Ny4892, and a smaller lithic scatter, site 26Ny4894. Analysis of the debitage at 26Ny4892 indicates that this area was used primarily as a quarry for relatively small cobbles of obsidian found in the alluvium. Lithic reduction techniques used here are designed for efficiently reducing small pieces of toolstone and are oriented towards producing flake blanks from small cores and bifacially reducing exhausted cores. Projectile point cross references indicate that the area has seen at least casual use for about 10,000 years and more sustained use for the last 3,000 years. Initial obsidian hydration measurements indicate sustained use of the quarry for about the last 3,000 years although the loci of activities appear to change over time. Based on this study, the DRI recommends that quarrying activities in the area of 26Ny4892 are sufficiently sampled and that additional investigations into that aspect of prehistoric activity in the area are not necessary. This does not apply to other aspects of prehistoric use. DRI recommends that preconstruction surveys continue to identify nonquarrying, prehistoric utilization of the area. With the increased traffic on the Buckboard Mesa Road, there is a greater potential for vandalism to sites of National Register-quality located near the road. The DRI recommends that during the orientation briefing the workers at the Test Site be educated about the importance of cultural resources and the need for their protection. 202 refs., 41 figs., 52 tabs.

  4. Evaluation of Encapsulant Materials for PV Applications

    SciTech Connect (OSTI)

    Kempe, M.

    2010-01-01T23:59:59.000Z

    Encapsulant materials used in PV modules serve multiple purposes. They physically hold components in place, provide electrical insulation, optically couple superstrate materials (e.g., glass) to PV cells, protect components from mechanical stress by mechanically de-coupling components via strain relief, and protect materials from corrosion. To do this, encapsulants must adhere well to all surfaces, remain compliant, and transmit light after exposure to temperature, humidity, and UV radiation histories. Encapsulant materials by themselves do not completely prevent water vapour ingress [1-3], but if they are well adhered, they will prevent the accumulation of liquid water providing protection against corrosion as well as electrical shock. Here, a brief review of some of the polymeric materials under consideration for PV applications is provided, with an explanation of some of their advantages and disadvantages.

  5. Large-Scale PV Integration Study

    SciTech Connect (OSTI)

    Lu, Shuai; Etingov, Pavel V.; Diao, Ruisheng; Ma, Jian; Samaan, Nader A.; Makarov, Yuri V.; Guo, Xinxin; Hafen, Ryan P.; Jin, Chunlian; Kirkham, Harold; Shlatz, Eugene; Frantzis, Lisa; McClive, Timothy; Karlson, Gregory; Acharya, Dhruv; Ellis, Abraham; Stein, Joshua; Hansen, Clifford; Chadliev, Vladimir; Smart, Michael; Salgo, Richard; Sorensen, Rahn; Allen, Barbara; Idelchik, Boris

    2011-07-29T23:59:59.000Z

    This research effort evaluates the impact of large-scale photovoltaic (PV) and distributed generation (DG) output on NV Energy’s electric grid system in southern Nevada. It analyzes the ability of NV Energy’s generation to accommodate increasing amounts of utility-scale PV and DG, and the resulting cost of integrating variable renewable resources. The study was jointly funded by the United States Department of Energy and NV Energy, and conducted by a project team comprised of industry experts and research scientists from Navigant Consulting Inc., Sandia National Laboratories, Pacific Northwest National Laboratory and NV Energy.

  6. Updating Interconnection Screens for PV System Integration

    SciTech Connect (OSTI)

    Coddington, M.; Mather, B.; Kroposki, B.; Lynn, K.; Razon, A.; Ellis, A.; Hill, R.; Key, T.; Nicole, K.; Smith, J.

    2012-02-01T23:59:59.000Z

    This white paper evaluates the origins and usefulness of the capacity penetration screen, offer short-term solutions which could effectively allow fast-track interconnection to many PV system applications, and considers longer-term solutions for increasing PV deployment levels in a safe and reliable manner while reducing or eliminating the emphasis on the penetration screen. Short-term and longer-term alternatives approaches are offered as examples; however, specific modifications to screening procedures should be discussed with stakeholders and must ultimately be adopted by state and federal regulatory bodies.

  7. International PV QA Task Force's Proposed Comparative Rating System for PV Modules: Preprint

    SciTech Connect (OSTI)

    Wohlgemuth, J.; Kurtz, S.

    2014-10-01T23:59:59.000Z

    The International PV Quality Assurance Task Force is developing a rating system that provides comparative information about the relative durability of PV modules. Development of accelerated stress tests that can provide such comparative information is seen as a major step toward being able to predict PV module service life. This paper will provide details of the ongoing effort to determine the format of such an overall module rating system. The latest proposal is based on using three distinct climate zones as defined in IEC 60721-2-1 for two different mounting systems. Specific stresses beyond those used in the qualification tests are being developed for each of the selected climate zones.

  8. axonopodis pv phaseoli: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control objective is to balance the power flow from the PV module to the battery and the load such that the PV power is utilized effectively and the battery is charged with three...

  9. arboricola pv pruni: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the battery charging loop. The control objective is to balance the power flow from the PV module to the battery and the load such that the PV power is utilized effectively and...

  10. accelerating pv cost: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mix of wind and solar PV comes at around 80% solar PV share, owing to the US summer load peak. By picking this mix, long-term storage requirements can be more than halved...

  11. Breakout Session: Getting in the Loop: PV Hardware Recycling...

    Energy Savers [EERE]

    Getting in the Loop: PV Hardware Recycling and Sustainability Breakout Session: Getting in the Loop: PV Hardware Recycling and Sustainability May 21, 2014 6:30PM to 7:30PM PDT...

  12. Kauai, Hawaii: Solar Resource Analysis and High-Penetration PV...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hourly satellite solar radiation information is used to determine the amount of annual solar energy that can be pro- duced from PV for the designated area populated with PV....

  13. Top physics at CDF

    SciTech Connect (OSTI)

    Julia Thom

    2004-06-24T23:59:59.000Z

    Precision studies of top quark properties are a primary goal of the Run II physics program at the Fermilab Tevatron. Marking the first stages of this program, the CDF collaboration presents recent results on top pair production cross section, single top physics and top mass, using between 109 and 200 pb{sup -1} of Run II data.

  14. Analyzing and simulating the variability of solar irradiance and solar PV powerplants

    E-Print Network [OSTI]

    Lave, Matthew S.

    2012-01-01T23:59:59.000Z

    WVM) for Solar PV Power Plants, Sustainable Energy, IEEESolar PV Power Plants," IEEE Transactions on Sustainable Energy,

  15. A Wavelet-Based Variability Model (WVM) for Solar PV Power Plants

    E-Print Network [OSTI]

    Lave, Matthew; Kleissl, Jan; Stein, Joshua S

    2013-01-01T23:59:59.000Z

    simulating solar photovoltaic (PV) power plant output givenfor simulating the power output of a solar photovoltaic (PV)

  16. PV Performance and Reliability Validation Capabilities at Sandia...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance and Reliability Validation Capabilities at Sandia National Laboratories PV Performance and Reliability Validation Capabilities at Sandia National Laboratories This...

  17. El Paso Electric Company- Solar PV Pilot Program

    Broader source: Energy.gov [DOE]

    '''''El Paso Electric's 2013 Solar PV Rebate program will reopen at 12:00 pm MST on February 1, 2013.'''''

  18. PV output smoothing using a battery and natural gas engine-generator.

    SciTech Connect (OSTI)

    Johnson, Jay; Ellis, Abraham; Denda, Atsushi [Shimizu Corporation; Morino, Kimio [Shimizu Corporation; Shinji, Takao [Tokyo Gas Co., Ltd.; Ogata, Takao [Tokyo Gas Co., Ltd.; Tadokoro, Masayuki [Tokyo Gas Co., Ltd.

    2013-02-01T23:59:59.000Z

    In some situations involving weak grids or high penetration scenarios, the variability of photovoltaic systems can affect the local electrical grid. In order to mitigate destabilizing effects of power fluctuations, an energy storage device or other controllable generation or load can be used. This paper describes the development of a controller for coordinated operation of a small gas engine-generator set (genset) and a battery for smoothing PV plant output. There are a number of benefits derived from using a traditional generation resource in combination with the battery; the variability of the photovoltaic system can be reduced to a specific level with a smaller battery and Power Conditioning System (PCS) and the lifetime of the battery can be extended. The controller was designed specifically for a PV/energy storage project (Prosperity) and a gas engine-generator (Mesa Del Sol) currently operating on the same feeder in Albuquerque, New Mexico. A number of smoothing simulations of the Prosperity PV were conducted using power data collected from the site. By adjusting the control parameters, tradeoffs between battery use and ramp rates could be tuned. A cost function was created to optimize the control in order to balance, in this example, the need to have low ramp rates with reducing battery size and operation. Simulations were performed for cases with only a genset or battery, and with and without coordinated control between the genset and battery, e.g., without the communication link between sites or during a communication failure. The degree of smoothing without coordinated control did not change significantly because the battery dominated the smoothing response. It is anticipated that this work will be followed by a field demonstration in the near future.

  19. Dynamic Interactions of PV units in Low Volatge Distribution Systems

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    Dynamic Interactions of PV units in Low Volatge Distribution Systems M. J. Hossain, J. Lu Griffith. Abstract--Photovoltaic (PV) units along with other distributed energy resources (DERs) are located close, robust control, stability. I. Introduction The integration level of PV units in low and medium voltage

  20. VADE-MECUM DE LA VORTICITE POTENTIELLE Dfinition (PV) P=

    E-Print Network [OSTI]

    Legras, Bernard

    VADE-MECUM DE LA VORTICITE POTENTIELLE Définition (PV) P= rot u2 Unité 1PVU = 106 K kg1 m2 s1 Pour les mouvements inviscides et adiabatiques, la PV est conservée pour chaque particule. Forme 102 s1 . La PV croît en magnitude vers les pôles. Ceci est dű ŕ la croissance de |f| vers les pôles

  1. Personeelsvereniging Technische Universiteit Eindhoven DOE MEE met de PV !!

    E-Print Network [OSTI]

    Franssen, Michael

    Personeelsvereniging Technische Universiteit Eindhoven DOE MEE met de PV !! Eindhoven 12 maart 2012 Het bestuur van de PV is dringend op zoek naar verjonging en nieuwe invulling van de volgende rollen Aanspreekpunt voor activiteiten Exacte invulling van de functie, mogelijk in duo, in overleg met het PV bestuur

  2. pV3 Programmer's Guide Client Side & Concentrator Programming

    E-Print Network [OSTI]

    Peraire, Jaime

    pV3 Programmer's Guide Rev. 2.05 Client Side & Concentrator Programming Bob Haimes Massachusetts.I.T., and USER agrees to preserve same. 2 #12;Contents 1 Introduction 6 2 pV3 in the Message Passing Environment 7 2.1 Using PVM Message Passing with the Simulation . . . . . . . . . . . . . . . . . . . . 7 2.2 pV

  3. November 21, 2000 PV Lesson Plan 2 Sample Questions & Answers

    E-Print Network [OSTI]

    Oregon, University of

    November 21, 2000 PV Lesson Plan 2 ­ Sample Questions & Answers Prepared for the Oregon Million a single PV cell produces; so how can you get the amperage that you need? 4. You want to run your small CD player that requires 17 Watts. If you have a 12% efficient PV array operating about noon on a sunny day

  4. IRRADIANCE MAPS APPLIED FOR THE PERFORMANCE ASSESSMENT OF PV SYSTEMS

    E-Print Network [OSTI]

    Heinemann, Detlev

    IRRADIANCE MAPS APPLIED FOR THE PERFORMANCE ASSESSMENT OF PV SYSTEMS - A CASE STUDY FOR THE GERMAN energy yield of a PV system,methods based on irradiance maps published by weather services or others-connected PV systems. DATA USED Hourly time series from ground and satellite-derived horizontal global

  5. Distribution System Analysis Tools for Studying High Penetration of PV

    E-Print Network [OSTI]

    Distribution System Analysis Tools for Studying High Penetration of PV with Grid Support Features Electric Energy System #12;#12;Distribution System Analysis Tools for Studying High Penetration of PV project titled "Distribution System Analysis Tools for Studying High Penetration of PV with Grid Support

  6. Informations et rservations : ce.pv-holidays.com

    E-Print Network [OSTI]

    Arleo, Angelo

    Informations et réservations : ce.pv-holidays.com * Offre valable pour tout séjour de 7 nuits détails sur ce.pv-holidays.com. Offre valable sur l'hébergement seul (hors frais de dossier, prestations cumulable avec votre remise partenaire, toute offre promotionnelle ou réductions. PV-CPDistribution, Société

  7. Experience Curves and Solar PV Fred Heutte, Senior Policy Associate

    E-Print Network [OSTI]

    Experience Curves and Solar PV Fred Heutte, Senior Policy Associate NW Energy Coalition September 3 resources costs as being ranges rather than fixed values. It is evident that the question of future solar PV small percentage of all resources at present, there is a strong sense that once solar PV reaches "grid

  8. High Resolution PV Power Modeling for Distribution Circuit Analysis

    SciTech Connect (OSTI)

    Norris, B. L.; Dise, J. H.

    2013-09-01T23:59:59.000Z

    NREL has contracted with Clean Power Research to provide 1-minute simulation datasets of PV systems located at three high penetration distribution feeders in the service territory of Southern California Edison (SCE): Porterville, Palmdale, and Fontana, California. The resulting PV simulations will be used to separately model the electrical circuits to determine the impacts of PV on circuit operations.

  9. A GUIDE TO PHOTOVOLTAIC (PV) SYSTEM DESIGN AND INSTALLATION

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION A GUIDE TO PHOTOVOLTAIC (PV) SYSTEM DESIGN AND INSTALLATION JUNE 2001 TO PHOTOVOLTAIC (PV) SYSTEM DESIGN AND INSTALLATION Prepared for: California Energy Commission Energy Technology installing photovoltaic (PV) systems under the Emerging Renewables Buydown Program. This is the first

  10. Tevatron Top Results

    E-Print Network [OSTI]

    Christophe Clement

    2006-05-28T23:59:59.000Z

    I present the latest results from the CDF and D0 collaborations on top quark production (single top and top quark pair production) at the Tevatron proton-antiproton collider at sqrt(s) =1.96 TeV, measurements of the top quark decay properties such as the branching ratio B(t -> Wb), the W helicity in t -> Wb decays, and measurements of fundamental parameters such as the top quark charge and mass.

  11. Tevatron top physics

    E-Print Network [OSTI]

    Jeannine Wagner-Kuhr; for the CDF; D0 Collaborations

    2009-04-15T23:59:59.000Z

    A summary of the most recent results on top quark physics obtained at Fermilab's Tevatron proton-antiproton collider, operating at a centre of mass energy of 1.96 TeV, is presented. Measurements of the top pair and single top quark production cross sections, the investigation of top quark decay properties, the precision measurement of the top quark mass as well as searches for physics beyond the standard model are discussed.

  12. Physics of top

    E-Print Network [OSTI]

    C. -P. Yuan

    2006-04-24T23:59:59.000Z

    I will briefly review the physics of top quark at high energy colliders. A new discovery of single-top event at the Fermilab Tevatron is expected. At the CERN Large Hadron Collider, detailed top quark properties can be measured and new physics ideas in which top quark plays a special role can be tested. I will also discuss a few phenomenological methods for analyzing experimental data to study top quark interactions.

  13. 2 IAEI NEWS September . October 2011 www.iaei.org perspectives on pv

    E-Print Network [OSTI]

    Johnson, Eric E.

    design and configuration -- and some of the newer systems with micro inverters or AC PV modules have 1202 IAEI NEWS September . October 2011 www.iaei.org perspectives on pv www.iaei.org September . October 2011 IAEI NEWS 3 perspectives on pv P hotovoltaic (PV) power systems have PV modules and PV arrays

  14. A synthesis of the "Ecological Effects of Reservoir Operations at Blue Mesa Reservoir" Project

    E-Print Network [OSTI]

    A synthesis of the "Ecological Effects of Reservoir Operations at Blue Mesa Reservoir" Project June 2005 #12;2 RECLAMATION A synthesis of the "Ecological Effects of Reservoir Operations at Blue Mesa), happy angler with a nice catch of kokanee (B. Johnson), CSU students doing vertical gill net survey (B

  15. Role of Polycrystalline Thin-Film PV Technologies in Competitive PV Module Markets: Preprint

    SciTech Connect (OSTI)

    von Roedern, B.; Ullal, H. S.

    2008-05-01T23:59:59.000Z

    This paper discusses the developments in thin-film PV technologies and provides an outlook on future commercial module efficiencies achievable based on today's knowledge about champion cell performance.

  16. Commercialization of PV-powered pumping systems for use in utility PV service programs. Final report

    SciTech Connect (OSTI)

    NONE

    1997-03-01T23:59:59.000Z

    The project described in this report was a commercialization effort focused on cost-effective remote water pumping systems for use in utility-based photovoltaic (PV) service programs. The project combined a commercialization strategy tailored specifically for electric utilities with the development of a PV-powered pumping system that operates conventional ac pumps rather than relying on the more expensive and less reliable PV pumps on the market. By combining these two attributes, a project goal was established of creating sustained utility purchases of 250 PV-powered water pumping systems per year. The results of each of these tasks are presented in two parts contained in this Final Summary Report. The first part summarizes the results of the Photovoltaic Services Network (PSN) as a new business venture, while the second part summarizes the results of the Golden Photon system installations. Specifically, results and photographs from each of the system installations are presented in this latter part.

  17. Solar Photovoltaic (PV) System Permit Application Checklist

    Broader source: Energy.gov [DOE]

    The Permit Application Checklist is intended to be used as a best management practice when establishing local government requirements for residential and commercial solar photovoltaic (PV) system permits. Local governments may modify this checklist to accommodate their local ordinances, code requirements, and permit procedures.

  18. MODULES FOR EXPERIMENTS IN STELLAR ASTROPHYSICS (MESA): PLANETS, OSCILLATIONS, ROTATION, AND MASSIVE STARS

    SciTech Connect (OSTI)

    Paxton, Bill; Cantiello, Matteo; Bildsten, Lars [Kavli Institute for Theoretical Physics, University of California, Santa Barbara, CA 93106 (United States); Arras, Phil [Department of Astronomy, University of Virginia, P.O. Box 400325, Charlottesville, VA 22904-4325 (United States); Brown, Edward F. [Department of Physics and Astronomy, National Superconducting Cyclotron Laboratory, and Joint Institute for Nuclear Astrophysics, Michigan State University, East Lansing, MI 48864 (United States); Dotter, Aaron [Research School of Astronomy and Astrophysics, The Australian National University, Weston, ACT 2611 (Australia); Mankovich, Christopher [Department of Physics, University of California, Santa Barbara, CA 93106 (United States); Montgomery, M. H. [Department of Astronomy and McDonald Observatory, University of Texas, Austin, TX 78712 (United States); Stello, Dennis [Sydney Institute for Astronomy (SIfA), School of Physics, University of Sydney, NSW 2006 (Australia); Timmes, F. X. [School of Earth and Space Exploration, Arizona State University, Tempe, AZ 85287 (United States); Townsend, Richard, E-mail: matteo@kitp.ucsb.edu [Department of Astronomy, University of Wisconsin-Madison, Madison, WI 53706 (United States)

    2013-09-15T23:59:59.000Z

    We substantially update the capabilities of the open source software package Modules for Experiments in Stellar Astrophysics (MESA), and its one-dimensional stellar evolution module, MESA star. Improvements in MESA star's ability to model the evolution of giant planets now extends its applicability down to masses as low as one-tenth that of Jupiter. The dramatic improvement in asteroseismology enabled by the space-based Kepler and CoRoT missions motivates our full coupling of the ADIPLS adiabatic pulsation code with MESA star. This also motivates a numerical recasting of the Ledoux criterion that is more easily implemented when many nuclei are present at non-negligible abundances. This impacts the way in which MESA star calculates semi-convective and thermohaline mixing. We exhibit the evolution of 3-8 M{sub Sun} stars through the end of core He burning, the onset of He thermal pulses, and arrival on the white dwarf cooling sequence. We implement diffusion of angular momentum and chemical abundances that enable calculations of rotating-star models, which we compare thoroughly with earlier work. We introduce a new treatment of radiation-dominated envelopes that allows the uninterrupted evolution of massive stars to core collapse. This enables the generation of new sets of supernovae, long gamma-ray burst, and pair-instability progenitor models. We substantially modify the way in which MESA star solves the fully coupled stellar structure and composition equations, and we show how this has improved the scaling of MESA's calculational speed on multi-core processors. Updates to the modules for equation of state, opacity, nuclear reaction rates, and atmospheric boundary conditions are also provided. We describe the MESA Software Development Kit that packages all the required components needed to form a unified, maintained, and well-validated build environment for MESA. We also highlight a few tools developed by the community for rapid visualization of MESA star results.

  19. PV batteries and charge controllers: Technical issues, costs, and market trends

    SciTech Connect (OSTI)

    Hammond, R.L.; Turpin, J.F. [Arizona State Univ. East, Mesa, AZ (United States); Corey, G.P.; Hund, T.D. [Sandia National Labs., Albuquerque, NM (United States); Harrington, S.R. [Harrington (S.R.), Albuquerque, NM (United States)

    1997-11-01T23:59:59.000Z

    A survey of US system integrators, charge controller manufacturers, and battery manufacturers was conducted in 1996 to determine market and application trends. This survey was sponsored by the USDOE. Results from 21 system integrators show a 1995 PV battery sales of $4.76 million. Using the survey results, a top down market analysis was conducted with a total predicted US battery market of $34.7 million and a world wide market of US $302 million. The survey also indicated that 71% (of dollars) were spent on VRLA and 29% on flooded lead-acid batteries. Eighty percent of charge controllers were ON-OFF, vs. PWM or constant voltage.

  20. TOP 2014: Experimental Summary

    E-Print Network [OSTI]

    Christian Schwanenberger

    2015-03-05T23:59:59.000Z

    A summary of the experimental results of the TOP2014 International Workshop in Cannes, France, is presented. This inspiring conference clearly showed the richness and diversity of top-quark physics research. Results cover a very broad spectrum of analyses involving studies of the strong and electroweak interactions of the top quark, high-precision measurements of intrinsic top-quark properties, developments of new tools in top-quark analyses, observations of new Standard Model processes, the interaction between the top quark and the Higgs boson and sensitive searches for new physics beyond the Standard Model.

  1. Top Physics at ATLAS

    E-Print Network [OSTI]

    Marcello Barisonzi

    2005-08-02T23:59:59.000Z

    The Large Hadron Collider LHC is a top quark factory: due to its high design luminosity, LHC will produce about 200 millions of top quarks per year of operation. The large amount of data will allow to study with great precision the properties of the top quark, most notably cross-section, mass and spin. The Top Physics Working Group has been set up at the ATLAS experiment, to evaluate the precision reach of physics measurements in the top sector, and to study the systematic effects of the ATLAS detector on such measurements. This reports give an overview of the main activities of the ATLAS Top Physics Working Group in 2004.

  2. The Dark Top

    E-Print Network [OSTI]

    David Poland; Jesse Thaler

    2008-12-08T23:59:59.000Z

    We present a class of composite Higgs models in which the particle that regulates the top quark contribution to the Higgs potential is also a weakly-interacting dark matter candidate. This color-neutral "dark top" is related to the standard model top quark through a large global symmetry. Because the same couplings that control the Higgs potential also determine various dark matter cross sections, the dark top scenario is quite predictive once the dark top mass and various quantum numbers are specified. We construct two concrete examples of dark top models with plausible UV completions and study their dark matter properties and LHC signatures.

  3. Theoretical overview on top pair production and single top production

    E-Print Network [OSTI]

    Stefan Weinzierl

    2012-01-19T23:59:59.000Z

    In this talk I will give an overview on theoretical aspects of top quark physics. The focus lies on top pair production and single top production.

  4. Development of a dispatchable PV peak shaving system. Final report on PV:BONUS Phase 2 activities

    SciTech Connect (OSTI)

    Ferguson, W.D. [Conectiv, Inc., Wilmington, DE (United States); Nigro, R.M. [Applied Energy Group, Inc., Hauppauge, NY (United States)

    1999-01-20T23:59:59.000Z

    In July 1993, the Delmarva Power and Light Company (now Conectiv, Inc.) was awarded a contract for the development of a Dispatchable Photovoltaic Peak Shaving System under the US Department of Energy PV:BONUS Program. The rationale for the dispatchable PV peak shaving system is based on the coincidence between the solar resource and the electrical load in question. Where poor coincidence exists, a PV array by itself does little to offset peak demands. However, with the addition of a relatively small amount of energy storage, the energy from the PV array can be managed and the value of the PV system increases substantially. In Phase 2, Delmarva Power continued the refinement of the system deployed in Phase 1. Four additional dispatchable PV peak shaving systems were installed for extended testing and evaluation at sites in Delaware, Maryland, Wisconsin and North Carolina. A second type of system that can be used to provide back-up power as well as peak shaving was also developed in Phase 2. This PV-UPS system used a packaging approach nearly identical to the PV peak shaving system, although there were significant differences in the design of the power electronics and control systems. Conceptually, the PV-UPS system builds upon the idea of adding value to PV systems by increasing functionality. A prototype of the PV-UPS system was installed in Delaware for evaluation near the end of the contract period.

  5. Top Quark Properties

    E-Print Network [OSTI]

    Tony M. Liss

    2012-12-03T23:59:59.000Z

    I review the latest results on properties of the top quark from the Tevatron and the LHC, including results measured in $t\\bar{t}$ and single-top events on the mass, width, couplings, and spin correlations.

  6. Top Physics at LHC

    E-Print Network [OSTI]

    M. Vander Donckt; for the CMS; ATLAS Collaborations

    2008-05-21T23:59:59.000Z

    The Large Hadron Collider (LHC) will provide a huge amount of top-antitop events, making the LHC a top quark factory, producing 1 tt pair per second at a luminosity of 10^33cm-2s-1. A large top quark sample will be available from the start of LHC and will play an important role in commissioning the CMS and ATLAS detectors. An overview of the top quark measurements during the first data-taking period is given.

  7. Top Quark Physics

    E-Print Network [OSTI]

    Erich W. Varnes

    2008-10-20T23:59:59.000Z

    A review is presented of the current experimental status of the top quark sector of the standard model. The measurements summarized include searches for electroweak single top production, the latest results on the ttbar production cross section, and searches for new physics in top quark production and decay. In addition, the recent measurement of the top quark mass to a precision of 0.7% is highlighted

  8. Cascaded Microinverter PV System for Reduced Cost

    SciTech Connect (OSTI)

    Bellus, Daniel R.; Ely, Jeffrey A.

    2013-04-29T23:59:59.000Z

    In this project, a team led by Delphi will develop and demonstrate a novel cascaded photovoltaic (PV) inverter architecture using advanced components. This approach will reduce the cost and improve the performance of medium and large-sized PV systems. The overall project objective is to develop, build, and test a modular 11-level cascaded three-phase inverter building block for photovoltaic applications and to develop and analyze the associated commercialization plan. The system will be designed to utilize photovoltaic panels and will supply power to the electric grid at 208 VAC, 60 Hz 3-phase. With the proposed topology, three inverters, each with an embedded controller, will monitor and control each of the cascade sections, reducing costs associated with extra control boards. This report details the final disposition on this project.

  9. Materials Testing for PV Module Encapsulation

    SciTech Connect (OSTI)

    Jorgensen, G.; Terwilliger, K.; Glick, S.; Pern, J.; McMahon, T.

    2003-05-01T23:59:59.000Z

    Important physical properties of materials used in PV module packaging are presented. High-moisture-barrier, high-resistivity, adhesion-promoting coatings on polyethyl-ene terephthalate (PET) films have been fabricated and characterized for use in PV module application and com-pared to standard polymer backsheet materials. Ethylene vinyl acetate (EVA) and an encapsulant replacement for EVA are studied for their water vapor transmission rate (WVTR) and adhesion properties. WVTR, at test conditions up to 85C/100% relative humidity (RH), and adhesion val-ues are measured before and after filtered xenon arc lamp ultraviolet (UV) exposure and damp heat exposure at 85C/85% RH. Water ingress is quantified by weight gain and embedded humidity sensors.

  10. Top Threshold Physics

    E-Print Network [OSTI]

    Andre H. Hoang

    2006-04-21T23:59:59.000Z

    Running a future Linear Collider at the top pair threshold allows for precise measurements of the mass, the widths and the couplings of the top quark. I give a nontechnical review on recent theoretical developments and the theory status in top threshold physics concerning QCD corrections and top quark finite lifetime and electroweak effects. I also discuss threshold physics in the context of measurements of the top Yukawa coupling from $e^+e^-\\to t\\bar t H$ and of squark pair production.

  11. Offsite Construction Comparative Study of Panelized and Modular Construction for Rio Mesa Facilities

    E-Print Network [OSTI]

    Tipple, Brett

    Offsite Construction Comparative Study of Panelized and Modular Construction: This research is to evaluate the opportunities of prefabricated construction for remote the logistics of prefab construction on the Rio Mesa site, we hope that this project

  12. Real Power and Reactive Power Control of a Three-Phase Single-Stage-PV System and PV voltage Stability

    SciTech Connect (OSTI)

    Li, Huijuan [ORNL] [ORNL; Xu, Yan [ORNL] [ORNL; Adhikari, Sarina [ORNL] [ORNL; Rizy, D Tom [ORNL] [ORNL; Li, Fangxing [ORNL] [ORNL; Irminger, Philip [ORNL] [ORNL

    2012-01-01T23:59:59.000Z

    Grid-connected photovoltaic (PV) systems with power electronic interfaces can provide both real and reactive power to meet power system needs with appropriate control algorithms. This paper presents the control algorithm design for a three-phase single-stage grid-connected PV inverter to achieve either maximum power point tracking (MPPT) or a certain amount of real power injection, as well as the voltage/var control. The switching between MPPT control mode and a certain amount of real power control mode is automatic and seamless. Without the DC-to-DC booster stage, PV DC voltage stability is an important issue in the control design especially when the PV inverter is operating at maximum power point (MPP) with voltage/var control. The PV DC voltage collapse phenomenon and its reason are discussed. The method based on dynamic correction of the PV inverter output is proposed to ensure PV DC voltage stability. Simulation results of the single-stage PV system during system disturbances and fast solar irradiation changes confirm that the proposed control algorithm for single-stage PV inverters can provide appropriate real and reactive power services and ensure PV DC voltage stability during dynamic system operation and atmospheric conditions.

  13. A two-genome microarray for the rice pathogens Xanthomonas oryzae pv. oryzae and X. oryzae pv. oryzicola and its use in the discovery of a difference in their regulation of hrp genes.

    E-Print Network [OSTI]

    2008-01-01T23:59:59.000Z

    of Xanthomonas oryzae pv. oryzae hrp Genes in XOM2, a Novelin Xanthomonas oryzae pv. oryzae. Journal of bacteriologyrice by Xanthomonas oryzae pv. oryzicola. Mol Plant-Microbe

  14. Sandia Energy - Tutorial on PV System Modeling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home DistributionTransportation Safety Home Stationary Power NuclearTutorial on

  15. Sandia Energy - PV Reliability & Performance Model

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid IntegrationOffshore Wind RD&D:PVReliability &

  16. Jiangxi Solar PV Corp JSPV aka Solar PV Corporation | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetecGtelInterias SolarJaneJefferson,Information PV Corp JSPV aka Solar PV

  17. BeyondPV Co Ltd Bayang Solar PV | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation in Carbonof Alternative Sources ofBeyondPV Co Ltd Bayang Solar PV

  18. Top-secret super-secure vault declassified

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesisAppliances » Top Innovative Science of

  19. The Top Quark, Its Discovery, and Subsequent Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesis of 2Dand WaterTheManagementTheThe Top Quark, Its

  20. Study on PID Resistance of HIT PV Modules

    Broader source: Energy.gov (indexed) [DOE]

    2013 Photovoltaic Module Reliability Workshop NREL, Golden, CO February 26-27, 2013 Study on PID resistance of HIT PV modules Tasuku Ishiguro 1 , Hiroshi Kanno 1 , Mikio...

  1. Sandia Energy - PV Performance Modeling Collaborative's New and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modeling & Simulation Solar Newsletter Photovoltaic Systems Evaluation Laboratory (PSEL) PV Performance Modeling Collaborative's New and Improved Website Is Launched Previous Next...

  2. PV Arc Fault Detector Challenges Due to Module Frequency Response...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This poster does not contain any proprietary or confidential information. Introduction PV system arc faults have led to a number of rooftop fires which have caused significant...

  3. Sandia National Laboratories: 2014 PV Systems Symposium Details

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2014 PV Systems Symposium (May 5-7, 2014) Sandia National Laboratories and the Electric Power Research Institute (EPRI) are delighted to host this symposium on technical issues...

  4. Tucson's Solar Experience: Developing PV with RFPs and PPAs

    Energy Savers [EERE]

    Tucson's Solar Experience: Developing PV with RFPs and PPAs Bruce Plenk Solar Coordinator City of Tucson Office of Conservation and Sustainable Development DOE EERE- January 15,...

  5. Sandia National Laboratories: verify PV performance-prediction...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PV performance-prediction models Solar Regional Test Center in Vermont Achieves Milestone Installation On September 23, 2014, in Concentrating Solar Power, Energy, Facilities,...

  6. Estimating Rooftop Suitability for PV: A Review of Methods, Patents...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For researchers looking to understand the market potential of rooftop-installed photovoltaics (PV) in particular, understanding the amount and characteristics of rooftop space...

  7. Sandia Energy - Sandia Will Host PV Bankability Workshop at Solar...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Will Host PV Bankability Workshop at Solar Power International (SPI) 2013 Home Renewable Energy Energy Facilities Grid Integration Partnership News Distribution Grid Integration...

  8. Sandia National Laboratories: c-Si PV materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    c-Si PV materials Sandians Win 'Best Paper' Award at Photovoltaic Conference in Japan On March 4, 2015, in Computational Modeling & Simulation, Energy, Facilities, News, News &...

  9. Sandia National Laboratories: III-V PV materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    V PV materials Sandians Win 'Best Paper' Award at Photovoltaic Conference in Japan On March 4, 2015, in Computational Modeling & Simulation, Energy, Facilities, News, News &...

  10. Development of a Dispatchable PV Peak Shainv System. PV: Bonus Program - Phase 1 Report. Volume 1

    SciTech Connect (OSTI)

    None

    1995-10-01T23:59:59.000Z

    This report summarizes the work performed by Delmarva Power and Light and its subcontractors in Phase 1 of the US Department of Energy's PV:BONUS Program. The purpose of the program is to develop products and systems for buildings which utilize photovoltaic (N) technology. Beginning with a cooperative research effort with the University of Delaware's Center for Energy and Environmental Policy Research Delmarva Power developed and demonstrated the concept of Dispatchable PV Peak Shaving. This concept and the system which resulted horn the development work are unique from other grid-connected PV systems because it combines a PV, battery energy storage, power conversion and control technologies into an integrated package. Phase 1 began in July 1993 with the installation of a test and demonstration system at Delmarva's Northern Division General Office building near Newark, Delaware. Following initial testing throughout the summer and fall of 1993, significant modifications were made under an amendment to the DOE contract. Work on Phase 1 concluded in the early spring of 1995. Significant progress towards the goal of commercializing the system was made during Phase 1, and is summarized. Based on progress in Phase 1, a proposal to continue the work in Phase 2 was submitted to the US DOE in May 1995. A contract amendment and providing funds for the Phase 2 work is expected in July 1995.

  11. PV AND GRID RELIABILITY: AVAILABILITY OF PV POWER DURING CAPACITY SHORTFALLS

    E-Print Network [OSTI]

    Perez, Richard R.

    from a stream of actual load and PV output data: (1) The effective load carrying capability (ELCC output was simulated using high-resolution satellite cloud cover data [7]. The results are reported; (3) the solar load controller's (SLC) minimum temperature adjustment [6], is an other indirect

  12. Integrating Solar PV in Utility System Operations

    SciTech Connect (OSTI)

    Mills, A.; Botterud, A.; Wu, J.; Zhou, Z.; Hodge, B-M.; Heany, M.

    2013-10-31T23:59:59.000Z

    This study develops a systematic framework for estimating the increase in operating costs due to uncertainty and variability in renewable resources, uses the framework to quantify the integration costs associated with sub-hourly solar power variability and uncertainty, and shows how changes in system operations may affect these costs. Toward this end, we present a statistical method for estimating the required balancing reserves to maintain system reliability along with a model for commitment and dispatch of the portfolio of thermal and renewable resources at different stages of system operations. We estimate the costs of sub-hourly solar variability, short-term forecast errors, and day-ahead (DA) forecast errors as the difference in production costs between a case with “realistic” PV (i.e., subhourly solar variability and uncertainty are fully included in the modeling) and a case with “well behaved” PV (i.e., PV is assumed to have no sub-hourly variability and can be perfectly forecasted). In addition, we highlight current practices that allow utilities to compensate for the issues encountered at the sub-hourly time frame with increased levels of PV penetration. In this analysis we use the analytical framework to simulate utility operations with increasing deployment of PV in a case study of Arizona Public Service Company (APS), a utility in the southwestern United States. In our analysis, we focus on three processes that are important in understanding the management of PV variability and uncertainty in power system operations. First, we represent the decisions made the day before the operating day through a DA commitment model that relies on imperfect DA forecasts of load and wind as well as PV generation. Second, we represent the decisions made by schedulers in the operating day through hour-ahead (HA) scheduling. Peaking units can be committed or decommitted in the HA schedules and online units can be redispatched using forecasts that are improved relative to DA forecasts, but still imperfect. Finally, we represent decisions within the operating hour by schedulers and transmission system operators as real-time (RT) balancing. We simulate the DA and HA scheduling processes with a detailed unit-commitment (UC) and economic dispatch (ED) optimization model. This model creates a least-cost dispatch and commitment plan for the conventional generating units using forecasts and reserve requirements as inputs. We consider only the generation units and load of the utility in this analysis; we do not consider opportunities to trade power with neighboring utilities. We also do not consider provision of reserves from renewables or from demand-side options. We estimate dynamic reserve requirements in order to meet reliability requirements in the RT operations, considering the uncertainty and variability in load, solar PV, and wind resources. Balancing reserve requirements are based on the 2.5th and 97.5th percentile of 1-min deviations from the HA schedule in a previous year. We then simulate RT deployment of balancing reserves using a separate minute-by-minute simulation of deviations from the HA schedules in the operating year. In the simulations we assume that balancing reserves can be fully deployed in 10 min. The minute-by-minute deviations account for HA forecasting errors and the actual variability of the load, wind, and solar generation. Using these minute-by-minute deviations and deployment of balancing reserves, we evaluate the impact of PV on system reliability through the calculation of the standard reliability metric called Control Performance Standard 2 (CPS2). Broadly speaking, the CPS2 score measures the percentage of 10-min periods in which a balancing area is able to balance supply and demand within a specific threshold. Compliance with the North American Electric Reliability Corporation (NERC) reliability standards requires that the CPS2 score must exceed 90% (i.e., the balancing area must maintain adequate balance for 90% of the 10-min periods). The combination of representing DA forecast errors in the

  13. Energy 101: Solar PV | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField Campaign:INEAWaterCool Roofs Energy 101: Cool RoofsLumens EnergySolar PV

  14. Zhonghuite PV Technology Co | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: EnergyWyandanch,Eaga Solar LtdZhonghuite PV Technology Co Jump

  15. PV Powered Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri:EnergyOssian, New York:Ozark, Alabama:ASES 2003,PUD No 1PUD No 2PV

  16. All Solar PV | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDIT REPORT Americium/CuriumAgua Caliente Solar PowerAlaskanSolar PV Jump

  17. Gansu PV Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDIT REPORTEnergyFarms A SUK Place: Newport, Wales,DanielJieyuanPV Co Ltd

  18. PV Solar Planet | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorthOlympiaAnalysis) Jump to:PUD No 1 ofPV Solar Planet

  19. Tokyo Electron PV | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlin Baxin Hydropower Station Jump to:Tioga EnergyTokyo Electron PV Jump

  20. Top Physics at CDF

    SciTech Connect (OSTI)

    Moon, Chang-Seong

    2011-06-01T23:59:59.000Z

    We present the recent results of top-quark physics using up to 6 fb{sup -1} of p{bar p} collisions at a center of mass energy of {radical}s = 1.96 TeV analyzed by the CDF collaboration. Thanks to this large data sample, precision top quark measurements are now a reality at the Tevatron. Further, several new physics signals could appear in this large dataset. We will present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  1. Top Science of 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Liquid-scanning technology boosts airport security science-innovationassetsimagesicon-science.jpg Top Science of 2013 Our strong interdisciplinary teaming and unique research...

  2. Top Physics at CDF

    E-Print Network [OSTI]

    Chang-Seong Moon

    2011-07-01T23:59:59.000Z

    We present the recent results of top-quark physics using up to 6 fb$^{-1}$ of $p \\bar p$ collisions at a center of mass energy of $\\sqrt s$ = 1.96 TeV analyzed by the CDF collaboration. Thanks to this large data sample, precision top quark measurements are now a reality at the Tevatron. Further, several new physics signals could appear in this large dataset. We will present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  3. Top quark in theory

    E-Print Network [OSTI]

    Eric Laenen

    2008-09-18T23:59:59.000Z

    I review how the top quark is embedded in the Standard Model and some its proposed extensions, and how it manifests itself in various hadron collider signals.

  4. Figure 1. Top: Theoretical

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Top: Theoretical prediction of capacitance of nanoporous electrodes in dipolar solvent (red) versus ionic liquid (black- Jiang, 2013a); Middle: Activated graphene electrode in...

  5. Top Quark Highlights

    E-Print Network [OSTI]

    Christian Schwanenberger

    2010-04-28T23:59:59.000Z

    Highlights of top quark physics presented at the 2009 Europhysics Conference on High Energy Physics from 16-22 July 2009 in Krakow, Poland, are reviewed.

  6. Realisation of the full potential of PV Extract of report from workgroup 4 in EU's PV Technology Platform by Peter Ahm.

    E-Print Network [OSTI]

    Realisation of the full potential of PV Extract of report from workgroup 4 in EU's PV Technology. Realisation of the full potential of PV as an important and integral part of our energy supply to those that use it. There is thus an imperative to facilitate and promote education on PV

  7. Estimation of Groundwater Recharge at Pahute Mesa using the Chloride Mass-Balance Method

    SciTech Connect (OSTI)

    Cooper, Clay A [DRI] [DRI; Hershey, Ronald L [DRI] [DRI; Healey, John M [DRI] [DRI; Lyles, Brad F [DRI] [DRI

    2013-07-01T23:59:59.000Z

    Groundwater recharge on Pahute Mesa was estimated using the chloride mass-balance (CMB) method. This method relies on the conservative properties of chloride to trace its movement from the atmosphere as dry- and wet-deposition through the soil zone and ultimately to the saturated zone. Typically, the CMB method assumes no mixing of groundwater with different chloride concentrations; however, because groundwater is thought to flow into Pahute Mesa from valleys north of Pahute Mesa, groundwater flow rates (i.e., underflow) and chloride concentrations from Kawich Valley and Gold Flat were carefully considered. Precipitation was measured with bulk and tipping-bucket precipitation gauges installed for this study at six sites on Pahute Mesa. These data, along with historical precipitation amounts from gauges on Pahute Mesa and estimates from the PRISM model, were evaluated to estimate mean annual precipitation. Chloride deposition from the atmosphere was estimated by analyzing quarterly samples of wet- and dry-deposition for chloride in the bulk gauges and evaluating chloride wet-deposition amounts measured at other locations by the National Atmospheric Deposition Program. Mean chloride concentrations in groundwater were estimated using data from the UGTA Geochemistry Database, data from other reports, and data from samples collected from emplacement boreholes for this study. Calculations were conducted assuming both no underflow and underflow from Kawich Valley and Gold Flat. Model results estimate recharge to be 30 mm/yr with a standard deviation of 18 mm/yr on Pahute Mesa, for elevations >1800 m amsl. These estimates assume Pahute Mesa recharge mixes completely with underflow from Kawich Valley and Gold Flat. The model assumes that precipitation, chloride concentration in bulk deposition, underflow and its chloride concentration, have been constant over the length of time of recharge.

  8. Comparison Between TRNSYS Software Simulation and PV F-Chart Program on Photovoltaic System

    E-Print Network [OSTI]

    Haberl, J. S.; Baltazar, J. C.; Mao, C.

    2012-01-01T23:59:59.000Z

    This report covers the comparisons of Photovoltaic System by TRNSYS simulation and PV F-Chart program to test TRNSYS simulation accuracy. The report starts with the Photovoltaic (PV) (PV) System introduction in Section one which is followed...

  9. U.S. Aims for Zero-Energy: Support for PV on New Homes

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-01-01T23:59:59.000Z

    Figure 1. Relative Cost of PV on New, Market-Rate Homesfor Zero-Energy: Support for PV on New Homes Galen Barbose,segment for solar photovoltaic (PV) adoption, new homes have

  10. Exploring the Economic Value of EPAct 2005's PV Tax Credits

    E-Print Network [OSTI]

    Bolinger, Mark; Wiser, Ryan; Ing, Edwin

    2006-01-01T23:59:59.000Z

    Exploring the Economic Value of EPAct 2005’s PV Tax CreditsEconomic Value of EPAct 2005’s PV Tax Credits Mark Bolingerfor grid-connected photovoltaics (PV) in the US has grown

  11. Shaking Up the Residential PV Market: Implications of Recent Changes to the ITC

    E-Print Network [OSTI]

    Bolinger, Mark

    2008-01-01T23:59:59.000Z

    Shaking Up the Residential PV Market: Implications of Recentfor commercial photovoltaic (PV) systems from 10% to 30% of2005’s solar tax credits on PV system owners, in light of

  12. Exploring the Economic Value of EPAct 2005's PV Tax Credits

    E-Print Network [OSTI]

    Bolinger, Mark A

    2010-01-01T23:59:59.000Z

    to support a greater number PV systems at the reduced grantEconomic Value of EPAct 2005’s PV Tax Credits Mark Bolingerfor grid-connected photovoltaics (PV) in the US has grown

  13. Approaches To Integrating A HIgh Penertration Of Solar PV and CPV Onto The Electrical Grid

    E-Print Network [OSTI]

    Hill, Steven Craig

    2013-01-01T23:59:59.000Z

    63  Off?Grid (Stand?Alone) PV Power System not well established. OFF-GRID (STAND-ALONE) PV POWER SYSTEMvariability characteristics of off-grid PV power systems and

  14. Genome sequence and rapid evolution of the rice pathogen Xanthomonas oryzae pv. oryzae PXO99A.

    E-Print Network [OSTI]

    2008-01-01T23:59:59.000Z

    relationships among X. oryzae pv. oryzae (Xoo) strains PXO99MAFF311018, and X. oryzae pv. oryzicola (Xoc) strain BLS256biology of Xanthomonas oryzae pv. oryzae and approaches to

  15. Do PV Systems Increase Residential Selling Prices If So, How Can Practitioners Estimate This Increase?

    E-Print Network [OSTI]

    Hoen, Ben

    2013-01-01T23:59:59.000Z

    No. DE-AC02-05CH11231. Do PV Systems Increase Residentialimpacts of photovoltaic (PV) energy systems on home salesthat existing homes with PV systems sold for a premium over

  16. Ectopic expression of rice Xa21 overcomes developmentally controlled resistance to Xanthomonas oryzae pv. oryzae.

    E-Print Network [OSTI]

    2010-01-01T23:59:59.000Z

    of Xanthomonas oryzae pv. oryzae AvrXa21 and implicationsto Xanthomonas oryzae pv. oryzae Chang-Jin Park a , Sang-Wonreceptor XA21 Xanthomonas oryzae pv. oryzae a b s t r a c t

  17. The Economic Value of PV and Net Metering to Residential Customers in California

    E-Print Network [OSTI]

    Darghouth, Naim

    2010-01-01T23:59:59.000Z

    a Substantial Benefit of Solar PV”, The Electricity Journal,2008. MRW & Associates. “Solar PV and Retail Rate Design”,The Economic Value of PV and Net Metering to Residential

  18. BRST Invariant PV Regularization of SUSY Yang-Mills and SUGRA

    E-Print Network [OSTI]

    Gaillard, Mary K

    2012-01-01T23:59:59.000Z

    September 2011 BRST Invariant PV Regularization of SUSYemployer. ii BRST INVARIANT PV REGULARIZATION OF SUSY YANG-a number of years on Pauli-Villars (PV) regu- larization of

  19. Approaches To Integrating A HIgh Penertration Of Solar PV and CPV Onto The Electrical Grid

    E-Print Network [OSTI]

    Hill, Steven Craig

    2013-01-01T23:59:59.000Z

    for use in solar PV systems (inverters listed to UL 1741)disconnection of PV inverters during system transients thatModeling systems will need detailed PV inverter models in

  20. Designing PV Incentive Programs to Promote Performance: A Review of Current Practice

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2007-01-01T23:59:59.000Z

    manufacturers of PV modules and inverters are to establishPV modules, and UL- 1741 is the analogous standard for inverters andPV incentive programs surveyed for this paper, most require that inverters

  1. Designing PV Incentive Programs to Promote System Performance: A Review of Current Practice

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-01-01T23:59:59.000Z

    CCEF Small PV Program System Modules Inverters InstallationUL-1703 for PV modules and UL-1741 for inverters and otherfor Grid-Connected PV Systems Rated Output Modules Inverters

  2. Comparison Between TRNSYS Software Simulation and PV F-Chart Program on Photovoltaic System 

    E-Print Network [OSTI]

    Haberl, J. S.; Baltazar, J. C.; Mao, C.

    2012-01-01T23:59:59.000Z

    This report covers the comparisons of Photovoltaic System by TRNSYS simulation and PV F-Chart program to test TRNSYS simulation accuracy. The report starts with the Photovoltaic (PV) (PV) System introduction in Section one which is followed...

  3. Step-Stress Accelerated Degradation Testing (SSADT) for Photovoltaic (PV) Devices and Cells (Presentation)

    SciTech Connect (OSTI)

    Lee, J.; Elmore, R.; Suh, C.; Jones, W.

    2010-10-01T23:59:59.000Z

    Presentation on step-stress accelerated degradation testing (SSADT) for photovoltaics (PV). Developed are a step-stress degradation test (SSADT) for PV reliability tests and a lifetime prediction model for PV products.

  4. Power Systems Engineering Research Center Modeling, Analysis and Deployment of High PV

    E-Print Network [OSTI]

    Van Veen, Barry D.

    and equipment using GIS data, loads using AMI data and PV systems using measured PV output from extensive data electronics and grid integration of renew- able resources mainly solar PV and wind. Dr. Ayyanar received

  5. Grid-tied PV battery systems.

    SciTech Connect (OSTI)

    Barrett, Keith Phillip; Gonzalez, Sigifredo; Hund, Thomas D.

    2010-09-01T23:59:59.000Z

    Grid tied PV energy smoothing was implemented by using a valve regulated lead-acid (VRLA) battery as a temporary energy storage device to both charge and discharge as required to smooth the inverter energy output from the PV array. Inverter output was controlled by the average solar irradiance over the previous 1h time interval. On a clear day the solar irradiance power curve is offset by about 1h, while on a variable cloudy day the inverter output power curve will be smoothed based on the average solar irradiance. Test results demonstrate that this smoothing algorithm works very well. Battery state of charge was more difficult to manage because of the variable system inefficiencies. Testing continued for 30-days and established consistent operational performance for extended periods of time under a wide variety of resource conditions. Both battery technologies from Exide (Absolyte) and East Penn (ALABC Advanced) proved to cycle well at a Partial state of charge over the time interval tested.

  6. Oxynitride Thin Film Barriers for PV Packaging

    SciTech Connect (OSTI)

    Glick, S. H.; delCueto, J. A.; Terwilliger, K. M.; Jorgensen, G. J.; Pankow, J. W.; Keyes, B. M.; Gedvilas, L. M.; Pern, F. J.

    2005-11-01T23:59:59.000Z

    Dielectric thin-film barrier and adhesion-promoting layers consisting of silicon oxynitride materials (SiOxNy, with various stoichiometry) were investigated. For process development, films were applied to glass (TCO, conductive SnO2:F; or soda-lime), polymer (PET, polyethylene terephthalate), aluminized soda-lime glass, or PV cell (a-Si, CIGS) substrates. Design strategy employed de-minimus hazard criteria to facilitate industrial adoption and reduce implementation costs for PV manufacturers or suppliers. A restricted process window was explored using dilute compressed gases (3% silane, 14% nitrous oxide, 23% oxygen) in nitrogen (or former mixtures, and 11.45% oxygen mix in helium and/or 99.999% helium dilution) with a worst-case flammable and non-corrosive hazard classification. Method employed low radio frequency (RF) power, less than or equal to 3 milliwatts per cm2, and low substrate temperatures, less than or equal to 100 deg C, over deposition areas less than or equal to 1000 cm2. Select material properties for barrier film thickness (profilometer), composition (XPS/FTIR), optical (refractive index, %T and %R), mechanical peel strength and WVTR barrier performance are presented.

  7. Final Technical Report - Recovery Act: Organic Coatings as Encapsulants for Low Cost, High Performance PV Modules

    SciTech Connect (OSTI)

    Stuart Hellring; Jiping Shao; James Poole

    2011-12-05T23:59:59.000Z

    The objective of this project was to evaluate the feasibility of utilizing PPG's commercial organic coatings systems as efficient, modernized encapsulants for low cost, high performance, thin film photovoltaic modules. Our hypothesis was that the combination of an anticorrosive coating with a more traditional barrier topcoat would mitigate many electrochemical processes that are now responsible for the significant portion of photovoltaic (PV) failures, thereby nullifying the extremely high moisture barrier requirements of currently used encapsulation technology. Nine commercially available metal primer coatings and six commercially available top coatings were selected for screening. Twenty-one different primer/top coat combinations were evaluated. The primer coatings were shown to be the major contributor to corrosion inhibition, adhesion, and barrier properties. Two primer coatings and one top coating were downselected for testing on specially-fabricated test modules. The coated test modules passed initial current leakage and insulation testing. Damp Heat testing of control modules showed visible corrosion to the bus bar metal, whereas the coated modules showed none. One of the primer/top coat combinations retained solar power performance after Damp Heat testing despite showing some delamination at the EVA/solar cell interface. Thermal Cycling and Humidity Freeze testing resulted in only one test module retaining its power performance. Failure modes depended on the particular primer/top coating combination used. Overall, this study demonstrated that a relatively thin primer/top coating has the potential to replace the potting film and backsheet in crystalline silicon-based photovoltaic modules. Positive signals were received from commercially available coatings developed for applications having performance requirements different from those required for photovoltaic modules. It is likely that future work to redesign and customize these coatings would result in a coating system meeting the requirements for photovoltaic module encapsulation.

  8. Photovoltaic (PV) Pricing Trends: Historical, Recent, and Near-Term

    E-Print Network [OSTI]

    Photovoltaic (PV) Pricing Trends: Historical, Recent, and Near-Term Projections November 2012 #12;Photovoltaic (PV) Pricing Trends: Historical, Recent, and Near-Term Projections David Feldman1 , Galen Barbose2 , Robert Margolis1 , Ryan Wiser2 , NaĂŻm Darghouth2 , and Alan Goodrich1 1 National Renewable Energy

  9. Separating myths from reality in PV inverter reliability

    E-Print Network [OSTI]

    Rollins, Andrew M.

    Separating myths from reality in PV inverter reliability Or, How I learned to stop worrying: Navigant Consulting report to NREL on PV inverter status. NCI found that inverters were limited by 18 and love the BOM Timothy J. Peshek SDLE Reliability workshop, CWRU 4/9/2012 #12;What inverter manufacturers

  10. Top Mass and Properties

    E-Print Network [OSTI]

    Yen-Chu Chen

    2008-05-15T23:59:59.000Z

    The top quark was discovered in 1995. The top quark mass is now well measured at the Tevatron, with uncertainty getting below 1% of the top mass. The world average from last year was 170.9 $\\pm$ 1.8 GeV/$c^2$. The new CDF measurement is 172 $\\pm$ 1.2 (stat) $\\pm$ 1.5 (sys) GeV/$c^2$, and D0 will soon present a new measurement. The top quark mass is an important parameter in the Standard Model, and should be measured as precisely as possible. To learn more about the top quark observed and study possible new physics, other properties also should be measured. At the Tevatron, the charge of the top quark can be measured directly. Examples of other properties studied and reported in this presentation are W helicity, top decay branching ratio to b ($R_b$), searches for $t \\to H b$ and for flavor changing neutral current (FCNC). The results are all consistent with the Standard Model within current statistics. With significantly more data being collected at the Tevatron, precision measurements of the top properties are just starting.

  11. Top physics at CDF

    SciTech Connect (OSTI)

    Hughes, R.E. [Univ. of Rochester, NY (United States)

    1997-01-01T23:59:59.000Z

    We report on top physics results using a 100 pb{sup -1} data sample of p{bar p} collisions at {radical}s = 1.8 TeV collected with the Collider Detector at Fermilab (CDF). We have identified top signals in a variety of decay channels, and used these channels to extract a measurement of the top mass and production cross section. A subset of the data (67 pb{sup -1}) is used to determine M{sub top} = 176 {+-} 8(stat) {+-} 10(syst) and {sigma}(tt) = 7.6 {sub -2.0}{sup +2.4} pb. We present studies of the kinematics of t{bar t} events and extract the first direct measurement of V{sub tb}. Finally, we indicate prospects for future study of top physics at the Tevatron.

  12. An Analysis of Residential PV System Price Differences between the United States and Germany

    E-Print Network [OSTI]

    Seel, Joachim

    2014-01-01T23:59:59.000Z

    why residential customers in Germany pay 25% less for a PVFor Residential PV Systems in Germany. Bundesverband derof PV power applications in Germany”. International Energy

  13. Analyzing and simulating the variability of solar irradiance and solar PV powerplants

    E-Print Network [OSTI]

    Lave, Matthew S.

    2012-01-01T23:59:59.000Z

    Models of diffuse solar radiation, Renew Energ, 33 (2008) [solar irradiance for analyzing areally- totalized PV systems, Sol Energsolar irradiance for analyzing areally- totalized PV systems, Sol Energ

  14. Linkage to Previous International PV Module QA Task Force Workshops; Proposal for Rating System (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Sample, T.; Yamamichi, M.; Kondo, M.

    2013-05-01T23:59:59.000Z

    This presentation gives the historical background of the creation of the International PV QA Task Force as an introduction to the PV Module Reliability Workshop.

  15. Photovoltaic (PV) Pricing Trends: Historical, Recent, and Near-Term Projections

    E-Print Network [OSTI]

    Feldman, David

    2014-01-01T23:59:59.000Z

    if at all. Super monocrystalline PV modules are currentlyPV modules varies from about 10% (for tandem microcrystalline-amorphous silicon) to 20% (for super monocrystalline

  16. The Falling Price of Utility-Scale Solar Photovoltaic (PV) Projects...

    Office of Environmental Management (EM)

    Solar Photovoltaic (PV) Projects The Falling Price of Utility-Scale Solar Photovoltaic (PV) Projects Data courtesy of National Renewable Energy Lab. Chart by Daniel Wood. View...

  17. Utility Scale PV Perspective on SunShot Progress and Opportunities...

    Energy Savers [EERE]

    Utility Scale PV Perspective on SunShot Progress and Opportunities Utility Scale PV Perspective on SunShot Progress and Opportunities These slides correspond to a presentation...

  18. A Wavelet-Based Variability Model (WVM) for Solar PV Power Plants

    E-Print Network [OSTI]

    Lave, Matthew; Kleissl, Jan; Stein, Joshua S

    2013-01-01T23:59:59.000Z

    Model (WVM) for Solar PV Power Plants Matthew Lave, Jansolar photovoltaic (PV) power plant output given a singleproduce a simulated power plant output. The WVM is validated

  19. Physical Effects of Distributed PV Generation on California's Distribution System

    E-Print Network [OSTI]

    Cohen, Michael A

    2015-01-01T23:59:59.000Z

    Deployment of high-penetration photovoltaic (PV) power is expected to have a range of effects -- both positive and negative -- on the distribution grid. The magnitude of these effects may vary greatly depending upon feeder topology, climate, PV penetration level, and other factors. In this paper we present a simulation study of eight representative distribution feeders in three California climates at PV penetration levels up to 100\\%, supported by a unique database of distributed PV generation data that enables us to capture the impact of PV variability on feeder voltage and voltage regulating equipment. When comparing the influence of feeder location (i.e. climate) versus feeder type on outcomes, we find that location more strongly influences the incidence of reverse power flow, reductions in peak loading and the presence of voltage excursions. On the other hand, we find that feeder characteristics more strongly influence the magnitude of loss reduction and changes in voltage regulator operations. We find th...

  20. Lessons Learned from the Photovoltaic Manufacturing Technology/PV Manufacturing R&D and Thin Film PV Partnership Projects

    SciTech Connect (OSTI)

    Margolis, R.; Mitchell, R.; Zweibel, K.

    2006-09-01T23:59:59.000Z

    As the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program initiates new cost-shared solar energy R&D under the Solar America Initiative (SAI), it is useful to analyze the experience gained from cost-shared R&D projects that have been funded through the program to date. This report summarizes lessons learned from two DOE-sponsored photovoltaic (PV) projects: the Photovoltaic Manufacturing Technology/PV Manufacturing R&D (PVMaT/PVMR&D) project and the Thin-Film PV Partnership project. During the past 10-15 years, these two projects have invested roughly $330 million of government resources in cost-shared R&D and leveraged another $190 million in private-sector PV R&D investments. Following a description of key findings and brief descriptions of the PVMaT/PVMR&D and Thin-Film PV Partnership projects, this report presents lessons learned from the projects.

  1. Top Quark Properties

    SciTech Connect (OSTI)

    Peters, Yvonne

    2011-12-01T23:59:59.000Z

    Since its discovery in 1995 by the CDF and D0 collaborations at the Fermilab Tevatron collider, the top quark has undergone intensive studies. Besides the Tevatron experiments, with the start of the LHC in 2010 a top quark factory started its operation. It is now possible to measure top quark properties simultaneously at four different experiments, namely ATLAS and CMS at LHC and CDF and D0 at Tevatron. Having collected thousands of top quarks each, several top quark properties have been measured precisely, while others are being measured for the first time. In this article, recent measurements of top quark properties from ATLAS, CDF, CMS and D0 are presented, using up to 5.4 fb{sup -1} of integrated luminosity at the Tevatron and 1.1 fb{sup -1} at the LHC. In particular, measurements of the top quark mass, mass difference, foward backward charge asymmetry, t{bar t} spin correlations, the ratio of branching fractions, W helicity, anomalous couplings, color flow and the search for flavor changing neutral currents are discussed.

  2. Top Quark Properties

    E-Print Network [OSTI]

    Yvonne Peters; for the Atlas Collaboration; CDF Collaboration; CMS Collaboration; D0 Collaboration

    2011-12-02T23:59:59.000Z

    Since its discovery in 1995 by the CDF and D0 collaborations at the Fermilab Tevatron collider, the top quark has undergone intensive studies. Besides the Tevatron experiments, with the start of the LHC in 2010 a top quark factory started its operation. It is now possible to measure top quark properties simultaneously at four different experiments, namely ATLAS and CMS at LHC and CDF and D0 at Tevatron. Having collected thousands of top quarks each, several top quark properties have been measured precisely, while others are being measured for the first time. In this article, recent measurements of top quark properties from ATLAS, CDF, CMS and D0 are presented, using up to 5.4 fb-1 of integrated luminosity at the Tevatron and 1.1 fb^-1 at the LHC. In particular, measurements of the top quark mass, mass difference, forward backward charge asymmetry, tt - spin correlations, the ratio of branching fractions, W helicity, anomalous couplings, color flow and the search for flavor changing neutral currents are discussed.

  3. Analytical Improvements in PV Degradation Rate Determination

    SciTech Connect (OSTI)

    Jordan, D. C.; Kurtz, S. R.

    2011-02-01T23:59:59.000Z

    As photovoltaic (PV) penetration of the power grid increases, it becomes vital to know how decreased power output may affect cost over time. In order to predict power delivery, the decline or degradation rates must be determined accurately. For non-spectrally corrected data several complete seasonal cycles (typically 3-5 years) are required to obtain reasonably accurate degradation rates. In a rapidly evolving industry such a time span is often unacceptable and the need exists to determine degradation rates accurately in a shorter period of time. Occurrence of outliers and data shifts are two examples of analytical problems leading to greater uncertainty and therefore to longer observation times. In this paper we compare three methodologies of data analysis for robustness in the presence of outliers, data shifts and shorter measurement time periods.

  4. Electrochemical Approaches to PV Busbar Application

    SciTech Connect (OSTI)

    Pankow, J. W.

    2005-01-01T23:59:59.000Z

    Busbars are an integral component of any thin-film photovoltaic module and must be easy and quick to apply by PV manufacturers, as well as provide long-term reliability in deployed modules. Potential reliability issues include loss of adhesion and delamination, chemical instability under current collection conditions (electromigration or corrosion), compatibility of material and application method with subsequent encapsulation steps. Several new and novel busbar materials and application methods have been explored, including adhering metal busbars with various one- and two-part conductive epoxies or conductive adhesive films, ultrasonic bonding of metal busbar strips, and bonding of busbar strips using low-temperature solders. The most promising approach to date has been the direct application of metal busbars via various electrochemical techniques, which offers a variety of distinct advantages.

  5. Innovations in Wind and Solar PV Financing

    SciTech Connect (OSTI)

    Cory, K.; Coughlin, J.; Jenkin, T.; Pater, J.; Swezey, B.

    2008-02-01T23:59:59.000Z

    There is growing national interest in renewable energy development based on the economic, environmental, and security benefits that these resources provide. Historically, greater development of our domestic renewable energy resources has faced a number of hurdles, primarily related to cost, regulation, and financing. With the recent sustained increase in the costs and associated volatility of fossil fuels, the economics of renewable energy technologies have become increasingly attractive to investors, both large and small. As a result, new entrants are investing in renewable energy and new business models are emerging. This study surveys some of the current issues related to wind and solar photovoltaic (PV) energy project financing in the electric power industry, and identifies both barriers to and opportunities for increased investment.

  6. GEOTHERMAL RESOURCE AND RESERVOIR INVESTIGATIONS OF U.S. BUREAU OF RECLAMATION LEASEHOLDS AT EAST MESA, IMPERIAL VALLEY, CALIFORNIA

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    document. LBL-7094 UC-66~1 GEOTHERMAL RESOURCE AND RESERVOIRInc. , 1976. Study of the geothermal reservoir underlyingtest, 1976, East Mesa geothermal field in California.

  7. Sandia Energy - Mesa del Sol Project Is Finalist for International Smart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution Grid Integration Permalink Gallery Mesa del Sol Project

  8. Differential top pair cross section and top anti-top plus jets Physics

    E-Print Network [OSTI]

    Malgorzata Worek

    2013-02-14T23:59:59.000Z

    A brief summary of the current status of the next-to-leading order QCD corrections to top quark pair production and the associated production of top anti-top with jet(s) in different configurations, i.e. with one jet, two jets and another top anti-top pair, is presented.

  9. Top Needs of Occupy Sites

    E-Print Network [OSTI]

    Baldwin, J.R.

    2012-01-01T23:59:59.000Z

    Individuals Occupy Sourcing Top Needs of Occupy Sites Art byand Social Media in Colombia Top Needs of Occupy Sites J.R.Baldwin collects the top needs of Occupy sites across the

  10. Optimal Solar PV Arrays Integration for Distributed Generation

    SciTech Connect (OSTI)

    Omitaomu, Olufemi A [ORNL; Li, Xueping [University of Tennessee, Knoxville (UTK)

    2012-01-01T23:59:59.000Z

    Solar photovoltaic (PV) systems hold great potential for distributed energy generation by installing PV panels on rooftops of residential and commercial buildings. Yet challenges arise along with the variability and non-dispatchability of the PV systems that affect the stability of the grid and the economics of the PV system. This paper investigates the integration of PV arrays for distributed generation applications by identifying a combination of buildings that will maximize solar energy output and minimize system variability. Particularly, we propose mean-variance optimization models to choose suitable rooftops for PV integration based on Markowitz mean-variance portfolio selection model. We further introduce quantity and cardinality constraints to result in a mixed integer quadratic programming problem. Case studies based on real data are presented. An efficient frontier is obtained for sample data that allows decision makers to choose a desired solar energy generation level with a comfortable variability tolerance level. Sensitivity analysis is conducted to show the tradeoffs between solar PV energy generation potential and variability.

  11. Kauai Island Utility Co-op (KIUC) PV integration study.

    SciTech Connect (OSTI)

    Ellis, Abraham; Mousseau, Tom (Knoxville, TN)

    2011-08-01T23:59:59.000Z

    This report investigates the effects that increased distributed photovoltaic (PV) generation would have on the Kauai Island Utility Co-op (KIUC) system operating requirements. The study focused on determining reserve requirements needed to mitigate the impact of PV variability on system frequency, and the impact on operating costs. Scenarios of 5-MW, 10-MW, and 15-MW nameplate capacity of PV generation plants distributed across the Kauai Island were considered in this study. The analysis required synthesis of the PV solar resource data and modeling of the KIUC system inertia. Based on the results, some findings and conclusions could be drawn, including that the selection of units identified as marginal resources that are used for load following will change; PV penetration will displace energy generated by existing conventional units, thus reducing overall fuel consumption; PV penetration at any deployment level is not likely to reduce system peak load; and increasing PV penetration has little effect on load-following reserves. The study was performed by EnerNex under contract from Sandia National Laboratories with cooperation from KIUC.

  12. 3-Port Single-Stage PV & Battery Converter Improves Efficiency and Cost in Combined PV/Battery Systems

    SciTech Connect (OSTI)

    Bundschuh, Paul [Ideal Power

    2013-03-23T23:59:59.000Z

    Due to impressive cost reductions in recent years, photovoltaic (PV) generation is now able to produce electricity at highly competitive prices, but PV’s inherent intermittency reduces the potential value of this energy. The integration of battery storage with PV will be transformational by increasing the value of solar. Utility scale systems will benefit by firming intermittency including PV ramp smoothing, grid support and load shifting, allowing PV to compete directly with conventional generation. For distributed grid-tied PV adding storage will reduce peak demand utility charges, as well as providing backup power during power grid failures. The largest long term impact of combined PV and battery systems may be for delivering reliable off-grid power to the billions of individuals globally without access to conventional power grids, or for billions more that suffer from daily power outages. PV module costs no longer dominate installed PV system costs. Balance-of-System (BOS) costs including the PV inverter and installation now contribute the majority of installed system costs. Battery costs are also dropping faster than installation and battery power converter systems. In each of these separate systems power converters have become a bottleneck for efficiency, cost and reliability. These bottlenecks are compounded in hybrid power conversion systems that combine separate PV and battery converters. Hybrid power conversion systems have required multiple power converters hardware units and multiple power conversion steps adding to efficiency losses, product and installation costs, and reliability issues. Ideal Power Converters has developed and patented a completely new theory of operation for electronic power converters using its indirect EnergyPacket Switching™ topology. It has established successful power converter products for both PV and battery systems, and its 3-Port Hybrid Converter is the first product to exploit the topology’s capability for the industry’s first single-stage multi-port hybrid power converter. This unique low cost approach eliminates the hybrid power conversion bottlenecks when integrating batteries into PV systems. As result this product will significantly accelerate market adoption of these systems.

  13. Top quark mass measurements

    SciTech Connect (OSTI)

    Hill, Christopher S.; /UC, Santa Barbara

    2004-12-01T23:59:59.000Z

    The top quark, with its extraordinarily large mass (nearly that of a gold atom), plays a significant role in the phenomenology of EWSB in the Standard Model. In particular, the top quark mass when combined with the W mass constrains the mass of the as yet unobserved Higgs boson. Thus, a precise determination of the mass of the top quark is a principal goal of the CDF and D0 experiments. With the data collected thus far in Runs 1 and 2 of the Tevatron, CDF and D0 have measured the top quark mass in both the lepton+jets and dilepton decay channels using a variety of complementary experimental techniques. The author presents an overview of the most recent of the measurements.

  14. Single Top Quark

    SciTech Connect (OSTI)

    Heidi Schellman and Ann Heinson

    2009-03-12T23:59:59.000Z

    Fermilab researchers Heidi Schellman and Ann Heinson take a whimsical look at the recent announcement of the discovery of the single top quark, by Fermilab's CDF and DZero experiments.

  15. Top physics prospects at LHC

    E-Print Network [OSTI]

    Florian Beaudette

    2005-06-24T23:59:59.000Z

    With a high instantaneous luminosity and the large top quark pair production cross section, the Large Hadron Collider (LHC) will be a "top factory" allowing the analysis of millions of top events. After a short description of the top quark pair production mechanism and the cross section measurement, the accuracy of the top mass measurement needed for a sound consistency check of the Standard Model is briefly discussed. Different top mass measurement methods are presented. The observability of the single top quark production is described. Finally the observation of the Higgs boson produced in association with a top quark pair is discussed.

  16. PV Validation and Bankability Workshop: San Jose, California

    SciTech Connect (OSTI)

    Granata, J.; Howard, J.

    2011-12-01T23:59:59.000Z

    This report is a collaboration between Sandia National Laboratories, the National Renewable Energy Laboratory, and the Florida Solar Energy Center (FSEC). The report provides feedback from the U.S. Department of Energy's (DOE) Solar Program PV Validation and Bankability Workshop in San Jose, California on August 31, 2011. It focuses on the current state of PV in the United States, private funding to fund U.S. PV industry growth, roles and functions of the regional test center program, and ways to improve the current validation and bankability practices.

  17. ENERGY-10 PV: Photovoltaics, A New Capability (Preprint)

    SciTech Connect (OSTI)

    Balcomb, J.D.; Hayter, S.J. (National Renewable Energy Laboratory); Weaver, N.L. (InterWeaver Consulting)

    2001-02-16T23:59:59.000Z

    This is one of two companion papers that describe the ENERGY-10 PV design-tool computer simulation program. The other paper is titled ''Hourly Simulation of Grid-Connected PV Systems Using Realistic Building Loads.'' While this paper focuses on the implementation method, the companion paper focuses on the PV aspects of the program. The case study in this paper is a residential building application, whereas the case study in the companion paper is a commercial application with an entirely different building load characteristic. Together, they provide a balanced view.

  18. Sandia Energy - Sandian Presents on PV Failure Analysis at European PV

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol Home Distribution GridDocumentsInstitute of Advanced IndustrialSolar Energy

  19. Robust control strategy for PV system integration in distribution systems M.J. Hossain a,

    E-Print Network [OSTI]

    Pota, Himanshu Roy

    Robust control strategy for PV system integration in distribution systems M.J. Hossain a, , T t s " Robust control provides flexible photovoltaic (PV) accommodations. " A robust PV control can significantly enhance the penetration level. " The change in volatile PV generations is considered

  20. 12 IAEI NEWS July.August 2004 www.iaei.org PERSPECTIVES ON PV

    E-Print Network [OSTI]

    Johnson, Eric E.

    12 IAEI NEWS July.August 2004 www.iaei.org PERSPECTIVES ON PV A series of articles on photovoltaic (PV) power systems and the National Electrical Code Single Conductor Exposed Cables! Not In My or commercial PV installation. Yes, PV systems have some unusual wiring meth- ods allowed by the Code. However

  1. 18 IAEI NEWS November.December 2004 www.iaei.org PERSPECTIVES ON PV

    E-Print Network [OSTI]

    Johnson, Eric E.

    18 IAEI NEWS November.December 2004 www.iaei.org PERSPECTIVES ON PV Photo 1. Framed PV modules A series of articles on photovoltaic (PV) power systems and the National Electrical Code by John Wiles Stalking the Elusive and Somewhat Strange PV System #12;www.iaei.org November.December 2004 IAEI NEWS 19

  2. Multiple Jets as PV Staircases: The Phillips Effect and the Resilience of Eddy-Transport Barriers

    E-Print Network [OSTI]

    Cambridge, University of

    Multiple Jets as PV Staircases: The Phillips Effect and the Resilience of Eddy-Transport Barriers D 2007) ABSTRACT A review is given that focuses on why the sideways mixing of potential vorticity (PV. PV mixing often produces a sideways layering or banding of the PV distribution and therefore

  3. Do PV Systems Increase Residential Selling Prices If So, How Can Practitioners Estimate This Increase?

    E-Print Network [OSTI]

    Hoen, Ben

    2013-01-01T23:59:59.000Z

    of Photovoltaic Energy Systems on Residential Selling Pricesof photovoltaic (PV) energy systems on home sales prices.

  4. 80 IAEI NEWS March.April 2005 www.iaei.org PERSPECTIVES ON PV

    E-Print Network [OSTI]

    Johnson, Eric E.

    the PV array. However, dc and ac disconnects must be located at the inverter and an additional ac for a readily accessible, visible-blade, lockable ac disconnect for the PV system. These disconnect requirements were covered in the article on PV systems in the March/April 2004 issue of the IAEI News. PV Source

  5. A Global Maximum Power Point Tracking Method for PV Module Integrated Converters

    E-Print Network [OSTI]

    Liberzon, Daniel

    with large arrays of series-connected PV mod- ules connected to a central inverter. Figure 1(a) depicts, it is conceivable that these systems do not extract the maximum possible power from the PV array when individual PV to partial shading. In such systems, power electronics circuits are integrated directly with PV modules

  6. Battery Management for Grid-Connected PV Systems with a Battery

    E-Print Network [OSTI]

    Pedram, Massoud

    components such as the PV array and PV inverters. The mainstream research is related to maxi- mum power pointBattery Management for Grid-Connected PV Systems with a Battery Sangyoung Park1, Yanzhi Wang2}@usc.edu ABSTRACT Photovoltaic (PV) power generation systems are one of the most promising renewable power sources

  7. IEEE TRANSACTIONS ON POWER ELECTRONICS 1 A Hybrid Power Control Concept for PV Inverters with Reduced

    E-Print Network [OSTI]

    Kerekes, Tamas

    IEEE TRANSACTIONS ON POWER ELECTRONICS 1 Letters A Hybrid Power Control Concept for PV Inverters- cept for grid-connected Photovoltaic (PV) inverters. The control strategy is based on either a Maximum utilization factor of PV inverters, and thus to cater for a higher penetration level of PV systems

  8. 66 IAEI NEWS September.October 2004 www.iaei.org PERSPECTIVES ON PV

    E-Print Network [OSTI]

    Johnson, Eric E.

    of utility-interactive PV systems use inverters that operate up to 600 volts direct current (dc conductors. PV Inverters Create Separately Derived Systems The second area focuses on the fact that PV, but not all, PV systems (both stand- alone systems and utility-interactive systems) employ an inverter

  9. 80 IAEI NEWS May . June 2012 www.iaei.org Microinverters and ac Pv Modules

    E-Print Network [OSTI]

    Johnson, Eric E.

    and code require- ments. However, they are different from the typical PV string inverters that use multiple80 IAEI NEWS May . June 2012 www.iaei.org Microinverters and ac Pv Modules M icroinverters and AC PV modules are becom- ing very common in residential and small commercial PV systems. See photos 1

  10. Optimum Inverter Sizing in Consideration of Irradiance Pattern and PV Incentives

    E-Print Network [OSTI]

    Lehman, Brad

    Optimum Inverter Sizing in Consideration of Irradiance Pattern and PV Incentives Song Chen* Peng Li for a PV system. The method evaluates effects of PV incentive policies, inverter efficiency curves, different scenarios of PV incentives are discussed and compared to show that the optimal inverter size

  11. IAEI NEWS November.December 2007 www.iaei.org WHY INSPECT PV SYSTEMS

    E-Print Network [OSTI]

    Johnson, Eric E.

    and have not worked extensively with these new PV compa- nies. New equipment (inverters and PV modules IAEI NEWS November.December 2007 www.iaei.org WHY INSPECT PV SYSTEMS P hotovoltaic power systems. Previous articles in this "Perspectives on PV" series have covered the details of the Code requirements

  12. Modeling and Simulation of Solar PV Arrays under Changing Illumination Conditions

    E-Print Network [OSTI]

    Lehman, Brad

    shadows (a passing cloud) on the output power of solar PV arrays. Each solar array is composed of a matrix of a shaded solar PV array as well as the PV output power. The model is also able to simulate and compute the output power of solar PV arrays for any configuration, with or without bypass diode. NOMENCLATURE IM

  13. Cd diffused mesa-substrate buried heterostructure InGaAsP/InP laser

    SciTech Connect (OSTI)

    Yi, M.B.; Lu, L.T.; Kapon, E.; Rav-Noy, Z.; Margalit, S.; Yariv, A.

    1985-02-15T23:59:59.000Z

    A new type of buried heterostructure InGaAsP/InP lasers grown by a single-step liquid phase epitaxy on Cd diffused mesa substrate is described. These lasers exhibit excellent current and optical confinement. Threshold currents as low as 15 mA are achieved for a laser with a 2-..mu..m-wide active region.

  14. Transportation of the MOAB Uranium Mill Tailings to White Mesa Mill by Slurry Pipeline

    SciTech Connect (OSTI)

    Hochstein, R. F.; Warner, R.; Wetz, T. V.

    2003-02-26T23:59:59.000Z

    The Moab uranium mill tailings pile, located at the former Atlas Minerals Corporation site approximately three miles north of Moab, Utah, is now under the control of the US Department of Energy (''DOE''). The location of the tailings pile adjacent to the Colorado River, and the ongoing contamination of groundwater and seepage of pollutants into the river, have lead to the investigation, as part of the final site remediation program, of alternatives to relocate the tailings to a qualified permanent disposal site. This paper will describe the approach being taken by the team formed between International Uranium (USA) Corporation (''IUC'') and Washington Group International (''WGINT'') to develop an innovative technical proposal to relocate the Moab tailings to IUC's White Mesa Mill south of Blanding, Utah. The proposed approach for relocating the tailings involves using a slurry pipeline to transport the tailings to the White Mesa Mill. The White Mesa Mill is a fully licensed, active uranium mill site that is uniquely suited for permanent disposal of the Moab tailings. The tailings slurry would be dewatered at the White Mesa Mill, the slurry water would be recycled to the Moab site for reuse in slurry makeup, and the ''dry'' tailings would be permanently disposed of in an approved below grade cell at the mill site.

  15. Ryan E. Smith, Associate Professor of Architecture Research Director, Rio Mesa Center

    E-Print Network [OSTI]

    Tipple, Brett

    Ryan E. Smith, Associate Professor of Architecture Research Director, Rio Mesa Center ARCH 6360 1 in architecture and engineering, and science students in biology will evaluate organisms' response to collaborate with other disciplines in order to innovate and invent sustainable and potentially marketable

  16. A Geomorphological Assessment of Armored Deposits Along the Southern Flanks of Grand Mesa, CO, USA

    E-Print Network [OSTI]

    Brunk, Timothy J.

    2011-08-08T23:59:59.000Z

    Mesa, which supported a Pleistocene ice cap, and the North Fork Gunnison River drainage. Thus, one has to ask: Are these deposits the result of the melting of the ice cap or are they fluvial terraces associated with the evolution of the ancestral...

  17. The mesa merging oxidation method for creating low-loss dielectrics and transmission lines on low-resistivity silicon

    E-Print Network [OSTI]

    Bowers, John

    The mesa merging oxidation method for creating low-loss dielectrics and transmission lines on low.1088/0960-1317/21/6/065020 The mesa merging oxidation method for creating low-loss dielectrics and transmission lines on low steps to create high aspect ratio coplanar waveguide (hicoplanar) transmission lines. The large SiO2

  18. Coal petrographic genetic units in deltaic-plain deposits of the Campanian Mesa Verde Group (New Mexico, USA)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Coal petrographic genetic units in deltaic-plain deposits of the Campanian Mesa Verde Group (New stratigraphy; Coal; Maceral analysis; Microlithotype Abstract The Campanian rocks of the Mesa Verde Group units, i.e. intermediate term cycles. The continental facies consist of coastal-plain deposits (coals

  19. Pallets of PV: Communities Purchase Solar and Drive Down Costs...

    Open Energy Info (EERE)

    Pallets of PV: Communities Purchase Solar and Drive Down Costs Together Home > Groups > OpenEI Community Central Graham7781's picture Submitted by Graham7781(2017) Super...

  20. Impact of Soiling and Pollution on PV Generation Performance

    Broader source: Energy.gov [DOE]

    This 5-page technical letter addresses air pollution effects on PV performance by quantifying, based on a literature search, the average annual loss due to soiling, the impact of cleaning, and a recommended cleaning schedule.

  1. New York Sun Competitive PV Program (New York)

    Broader source: Energy.gov [DOE]

    The New York Sun Competitive Photovoltaic (PV) Program is an expansion of the Renewable Portfolio Standard (RPS) Customer-Sited Tier Regional Program that includes Upstate New York. The New York...

  2. Taunton Municipal Lighting Plant- Residential PV Rebate Program

    Broader source: Energy.gov [DOE]

    Customers of Taunton Municipal Lighting Plant (TMLP) may be eligible for $2.00/watt rebate on solar photovoltaic (PV) installations. The minimum system size eligible for this rebate is 1 kilowatt ...

  3. Gainesville Regional Utilities- Solar-Electric (PV) System Rebate Program

    Broader source: Energy.gov [DOE]

    '''''NOTE: Application targets for fiscal year 2013 have been met for the GRU Solar PV Rebate Program. The next round of applications are scheduled to open on October 1, 2013 pending approval of...

  4. Interconnecting PV on New York City's Secondary Network Distribution System

    SciTech Connect (OSTI)

    Anderson, K.; Coddington, M.; Burman, K.; Hayter, S.; Kroposki, B.; Watson, A.

    2009-12-01T23:59:59.000Z

    This study describes technical assistance provided by NREL to help New York City and Con Edison improve the interconnection of distributed PV systems on a secondary network distribution system.

  5. Giant Leap Forward Toward Quality Assurance of PV Modules (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Sample, T.; Yamamichi, M.

    2012-03-01T23:59:59.000Z

    The presentation describes the composition of and motivation for the International PV QA Task Force, then describes the presentations and discussion that occurred at the workshop on Feb. 29th, 2012.

  6. Agenda for the PV Module Reliability Workshop, February 26 -...

    Broader source: Energy.gov (indexed) [DOE]

    PV Modules to Hygrothermal Stress" 9. P. Hacke and K. Terwilliger of NREL; S. Koch, T. Weber, and J. Berghold of PI-Berlin; S.Hoffmann, H. Ambrosi, and M. Koehl of Fraunhofer ISE;...

  7. AEP SWEPCO - SMART Source Solar PV Program | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Amount Residential: 1.50watt DC Non-residential: 1.20watt DC Provider Smart Source PV Program Southwestern Electric Power Company (SWEPCO) offers rebates to customers that...

  8. AEP Texas Central Company- SMART Source Solar PV Rebate Program

    Broader source: Energy.gov [DOE]

    American Electric Power Texas Central Company (AEP-TCC) offers rebates to customers that install photovoltaic (PV) systems on homes or other buildings. Customers of all rate classes are eligible to...

  9. AEP Texas North Company- SMART Source Solar PV Rebate Program

    Broader source: Energy.gov [DOE]

    American Electric Power Texas North Company (AEP-TNC) offers rebates to customers that install photovoltaic (PV) systems on homes or other buildings. Customers of all rate classes (e.g.,...

  10. Tucson's Solar Experience: Developing PV with RFPs and PPAs

    Office of Energy Efficiency and Renewable Energy (EERE)

    This presentation was given January 15, 2013, by Bruce Plenk, Solar Coordinator for the City of Tucson, Arizona, as part of the CommRE Developing PV Projects With RFPs and PPAs webinar.

  11. Interconnecting PV on New York City's Secondary Network Distribution System

    SciTech Connect (OSTI)

    K. Anderson; M. Coddington; K. Burman; S. Hayter; B. Kroposki; and A. Watson

    2009-11-30T23:59:59.000Z

    The U.S. Department of Energy (DOE) has teamed with cities across the country through the Solar America Cities (SAC) partnership program to help reduce barriers and accelerate implementation of solar energy. The New York City SAC team is a partnership between the City University of New York (CUNY), the New York City Mayor s Office of Long-term Planning and Sustainability, and the New York City Economic Development Corporation (NYCEDC).The New York City SAC team is working with DOE s National Renewable Energy Laboratory (NREL) and Con Edison, the local utility, to develop a roadmap for photovoltaic (PV) installations in the five boroughs. The city set a goal to increase its installed PV capacity from1.1 MW in 2005 to 8.1 MW by 2015 (the maximum allowed in 2005). A key barrier to reaching this goal, however, is the complexity of the interconnection process with the local utility. Unique challenges are associated with connecting distributed PV systems to secondary network distribution systems (simplified to ���¢��������networks���¢������� in this report). Although most areas of the country use simpler radial distribution systems to distribute electricity, larger metropolitan areas like New York City typically use networks to increase reliability in large load centers. Unlike the radial distribution system, where each customer receives power through a single line, a network uses a grid of interconnected lines to deliver power to each customer through several parallel circuits and sources. This redundancy improves reliability, but it also requires more complicated coordination and protection schemes that can be disrupted by energy exported from distributed PV systems. Currently, Con Edison studies each potential PV system in New York City to evaluate the system s impact on the network, but this is time consuming for utility engineers and may delay the customer s project or add cost for larger installations. City leaders would like to streamline this process to facilitate faster, simpler, and less expensive distributed PV system interconnections. To assess ways to improve the interconnection process, NREL conducted a four-part study with support from DOE. The NREL team then compiled the final reports from each study into this report. In Section 1���¢��������PV Deployment Analysis for New York City���¢��������we analyze the technical potential for rooftop PV systems in the city. This analysis evaluates potential PV power production in ten Con Edison networks of various locations and building densities (ranging from high density apartments to lower density single family homes). Next, we compare the potential power production to network loads to determine where and when PV generation is most likely to exceed network load and disrupt network protection schemes. The results of this analysis may assist Con Edison in evaluating future PV interconnection applications and in planning future network protection system upgrades. This analysis may also assist other utilities interconnecting PV systems to networks by defining a method for assessing the technical potential of PV in the network and its impact on network loads. Section 2���¢��������A Briefing for Policy Makers on Connecting PV to a Network Grid���¢��������presents an overview intended for nontechnical stakeholders. This section describes the issues associated with interconnecting PV systems to networks, along with possible solutions. Section 3���¢��������Technical Review of Concerns and Solutions to PV Interconnection in New Y

  12. Full Steam Ahead for PV in US Homes?

    SciTech Connect (OSTI)

    Bolinger, Mark A; Barbose, Galen; Wiser, Ryan

    2009-01-15T23:59:59.000Z

    In October 2008, the United States Congress extended both the residential and commercial solar investment tax credits (ITCs) for an unprecedented eight years, lifted the $2,000 cap on the residential credit, removed the prohibition on utility use of the commercial credit, and eliminated restrictions on the use of both credits in conjunction with the Alternative Minimum Tax. These significant changes, which apply to systems placed in service on or after January 1, 2009, will increase the value of the solar credits for residential system owners in particular, and are likely--in conjunction with state, local, and utility rebate programs targeting solar--to spur significant growth in residential, commercial, and utility-scale photovoltaic (PV) installations in the years ahead. This article focuses specifically on the residential credit, describing three areas in which removal of the $2,000 cap on the residential ITC will have significant implications for PV rebate program administrators, PV system owners, and the PV industry.

  13. DOE-LPO-MiniReport_PV_v10

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy's Loan Programs O ce (LPO) was instrumental in launching the utility-scale photovoltaic (PV) solar industry in the United States. In 2009, there was not a...

  14. PV VALUE(tm) User Manual v. 1.0

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PV Value(tm) User Manual v. 1.0 Jamie L. Johnson - Solar Power Electric(tm) Geoffrey T. Klise - Sandia National Laboratories 1312012 SAND2012-0682P Sandia National Laboratories...

  15. Evaluation of tracking flat plate and concentrator PV systems

    SciTech Connect (OSTI)

    Lepley, T. [Phasor Energy Co., Phoenix, AZ (United States); Hammond, B.; Harris, A. [Arizona State Univ., Tempe, AZ (United States)

    1997-12-31T23:59:59.000Z

    Arizona Public Service Company has conducted side-by-side field tests of most of the leading tracking flat plate and concentrating PV technologies. The results verify the added value due to tracking, but show that additional reliability improvements are needed in most cases. Concentrator PV systems can be high performers in sunny regions. In addition, a novel inverter system design by Raytheon has demonstrated excellent performance and promises to be more reliable and have lower cost than competing technologies.

  16. Performance Parameters for Grid-Connected PV Systems

    SciTech Connect (OSTI)

    Marion, B.; Adelstein, J.; Boyle, K.; Hayden, H.; Hammond, B.; Fletcher, T.; Canada, B.; Narang, D.; Shugar, D.; Wenger, H.; Kimber, A.; Mitchell, L.; Rich, G.; Townsend, T.

    2005-02-01T23:59:59.000Z

    The use of appropriate performance parameters facilitates the comparison of grid-connected photovoltaic (PV) systems that may differ with respect to design, technology, or geographic location. Four performance parameters that define the overall system performance with respect to the energy production, solar resource, and overall effect of system losses are the following: final PV system yield, reference yield, performance ratio, and PVUSA rating. These performance parameters are discussed for their suitability in providing desired information for PV system design and performance evaluation and are demonstrated for a variety of technologies, designs, and geographic locations. Also discussed are methodologies for determining system a.c. power ratings in the design phase using multipliers developed from measured performance parameters.The use of appropriate performance parameters facilitates the comparison of grid-connected photovoltaic (PV) systems that may differ with respect to design, technology, or geographic location. Four performance parameters that define the overall system performance with respect to the energy production, solar resource, and overall effect of system losses are the following: final PV system yield, reference yield, performance ratio, and PVUSA rating. These performance parameters are discussed for their suitability in providing desired information for PV system design and performance evaluation and are demonstrated for a variety of technologies, designs, and geographic locations. Also discussed are methodologies for determining system a.c. power ratings in the design phase using multipliers developed from measured performance parameters.

  17. Review of PV Inverter Technology Cost and Performance Projections

    SciTech Connect (OSTI)

    Navigant Consulting Inc.

    2006-01-01T23:59:59.000Z

    The National Renewable Energy Laboratory (NREL) has a major responsibility in the implementation of the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program. Sandia National Laboratories (SNL) has a major role in supporting inverter development, characterization, standards, certifications, and verifications. The Solar Energy Technologies Program recently published a Multiyear Technical Plan, which establishes a goal of reducing the Levelized Energy Cost (LEC) for photovoltaic (PV) systems to $0.06/kWh by 2020. The Multiyear Technical Plan estimates that, in order to meet the PV system goal, PV inverter prices will need to decline to $0.25-0.30 Wp by 2020. DOE determined the need to conduct a rigorous review of the PV Program's technical and economic targets, including the target set for PV inverters. NREL requested that Navigant Consulting Inc.(NCI) conduct a review of historical and projected cost and performance improvements for PV inverters, including identification of critical barriers identified and the approaches government might use to address them.

  18. Continuing Developments in PV Risk Management: Strategies, Solutions, and Implications

    SciTech Connect (OSTI)

    Lowder, T.; Mendelsohn, M.; Speer, B.; Hill, R.

    2013-02-01T23:59:59.000Z

    As the PV industry matures, successful risk management practices will become more imperative to ensure investor confidence, control costs, and facilitate further growth. This report discusses several key aspects of risk management during the commercial- and utility-scale project life cycle, from identification of risks, to the process of mitigating and allocating those risks among project parties, to transferring those risks through insurance. The report also explores novel techniques in PV risk management, options to offload risks onto the capital markets, and innovative insurance policies (namely warranty policies) that address risks unique to the PV sector. One of the major justifications for robust risk management in the PV industry is the cost-reduction opportunities it affords. If the PV industry can demonstrate the capability to successfully manage its risks, thereby inspiring confidence in financiers, it may be able to obtain a lower cost of capital in future transactions. A lower cost of capital translates to a lower cost of energy, which will in turn enhance PV?s competitiveness at a time when it will have to rely less on subsidies to support its market penetration.

  19. How Can We Make PV Modules Safer?: Preprint

    SciTech Connect (OSTI)

    Wohlgemuth, J. H.; Kurtz, S. R.

    2012-06-01T23:59:59.000Z

    Safety is a prime concern for the photovoltaics (PV) industry. As a technology deployed on residential and commercial buildings, it is critical that PV not cause damage to the buildings nor harm the occupants. Many of the PV systems on buildings are of sufficiently high voltage (300 to 600 Volts dc) that they may present potential hazards. These PV systems must be safe in terms of mechanical damage (nothing falls on someone), shock hazard (no risk of electrical shock when touching an exposed circuit element), and fire (the modules neither cause nor promote a fire). The present safety standards (IEC 61730 and UL 1703) do a good job of providing for design rules and test requirements for mechanical, shock, and spread of flame dangers. However, neither standard addresses the issue of electrical arcing within a module that can cause a fire. To make PV modules, they must be designed, built, and installed with an emphasis on minimizing the potential for open circuits and ground faults. This paper provides recommendations on redundant connection designs, robust mounting methods, and changes to the safety standards to yield safer PV modules.

  20. Physics with boosted top quarks

    E-Print Network [OSTI]

    Elin Bergeaas Kuutmann

    2014-08-29T23:59:59.000Z

    The production at the LHC of boosted top quarks (top quarks with a transverse momentum that greatly exceeds their rest mass) is a promising process to search for phenomena beyond the Standard Model. In this contribution several examples are discussed of new techniques to reconstruct and identify (tag) the collimated decay topology of the boosted hadronic decays of top quarks. Boosted top reconstruction techniques have been utilized in searches for new physical phenomena. An overview is given of searches by ATLAS, CDF and CMS for heavy new particles decaying into a top and an anti-top quark, vector-like quarks and supersymmetric partners to the top quark.

  1. Top Quark Measurements in CMS

    E-Print Network [OSTI]

    Efe Yazgan; for the CMS Collaboration

    2014-09-12T23:59:59.000Z

    Measurements involving top quarks provide important tests of QCD. A selected set of top quark measurements in CMS including the strong coupling constant, top quark pole mass, constraints on parton distribution functions, top quark pair differential cross sections, ttbar+0 and >0 jet events, top quark mass studied using various kinematic variables in different phase-space regions, and alternative top quark mass measurements is presented. The evolution of expected uncertainties in future LHC runs for the standard and alternative top quark mass measurements is also presented.

  2. Lightweight PV Inverters: Dual Bi-Directional IGBTs Modules Enables Breakthrough PV Inverter Using Current Modulation Topology

    SciTech Connect (OSTI)

    None

    2012-01-30T23:59:59.000Z

    Solar ADEPT Project: PV inverters convert DC power generated by modules into usable AC power. IPC’s initial 30kW 94lb. PV inverter reduces the weight of comparable 30kW PV inverters by 90%—reducing the cost of materials, manufacturing, shipping, and installation. With ARPA-E support, new bi-directional silicon power switches will be developed, commercialized, and utilized in IPC’s next-generation PV inverter. With these components, IPC will produce 100kW inverters that weight less than 100lb., reducing the weight of conventional 3,000lb. 100kW inverters by more than 95%. The new power switches will cut IPC’s $/W manufacturing cost in half, as well as further reduce indirect shipping and installation costs.

  3. ATLAS results on top properties

    E-Print Network [OSTI]

    F. Derue

    2014-08-26T23:59:59.000Z

    Recent measurements of top quark properties using $t{\\bar t}$ events produced in proton-proton collisions at the Large Hadron Collider with centre of mass energies of 7 and 8 TeV and detected by the ATLAS experiment are presented. These results include top quark mass, the top and anti-top mass difference, the electric charge, the top quark polarization and spin correlation, the $t{\\bar t}$ charge asymmetry and the search for flavour changing neutral currents.

  4. Flat Plate PV Module Eligibility Listing Procedure Updated 6/2/14 Senate Bill 1 (SB1) defines the solar incentive programs for California, and flat plate PV

    E-Print Network [OSTI]

    Flat Plate PV Module Eligibility Listing Procedure Updated 6/2/14 Senate Bill 1 (SB1) defines the solar incentive programs for California, and flat plate PV modules 1 must be listed on the SB1 for adding PV modules to the SB1 list is as follows: 1 . Data submitted to the Energy Commission

  5. Grandpa Top Model

    E-Print Network [OSTI]

    Hacker, Randi

    2013-02-20T23:59:59.000Z

    clothes in a photo shoot cancelled. Grandpa Liu tried on a jacket and liked its style. So his granddaughter took photos of him in it and other items of clothing, posted them and China's next top model was created. Filial pietists accuse Ting of elder...

  6. Rice Snl6, a cinnamoyl-CoA reductase-like gene family member, is required for NH1-mediated immunity to Xanthomonas oryzae pv. oryzae.

    E-Print Network [OSTI]

    Bart, Rebecca S; Chern, Mawsheng; Vega-Sánchez, Miguel E; Canlas, Patrick; Ronald, Pamela C

    2010-01-01T23:59:59.000Z

    Immunity to Xanthomonas oryzae pv. oryzae Rebecca S. Bartpathogen, Xanthomonas oryzae pv. oryzae (Xoo), constitutiveagainst Xanthomonas oryzae pv. oryzae in Rice. Molecular

  7. The Xanthomonas oryzae pv. oryzae PhoPQ two-component system is required for AvrXA21 activity, hrpG expression, and virulence.

    E-Print Network [OSTI]

    2008-01-01T23:59:59.000Z

    against Xanthomonas oryzae pv. oryzae in Korea. Kor. J.the Xanthomonas campestris pv. campestris lipopolysaccharidein Xanthomonas oryzae pv. oryzae re- quired for AvrXa21

  8. Origin of elevated water levels encountered in Pahute Mesa emplacement boreholes: Preliminary investigations

    SciTech Connect (OSTI)

    Brikowski, T.; Chapman, J.; Lyles, B.; Hokett, S.

    1993-11-01T23:59:59.000Z

    The presence of standing water well above the predicted water table in emplacement boreholes on Pahute Mesa has been a recurring phenomenon at the Nevada Test Site (NTS). If these levels represent naturally perched aquifers, they may indicate a radionuclide migration hazard. In any case, they can pose engineering problems in the performance of underground nuclear tests. The origin of these elevated waters is uncertain. Large volumes of water are introduced during emplacement drilling, providing ample source for artificially perched water, yet elevated water levels can remain constant for years, suggesting a natural origin instead. In an effort to address the issue of unexpected standing water in emplacement boreholes, three different sites were investigated in Area 19 on Pahute Mesa by Desert Research Institute (DRI) staff from 1990-93. These sites were U-19az, U-19ba, and U-19bh. As of this writing, U-19bh remains available for access; however, nuclear tests were conducted at the former two locations subsequent to this investigations. The experiments are discussed in chronological order. Taken together, the experiments indicate that standing water in Pahute Mesa emplacement holes originates from the drainage of small-volume naturally perched zones. In the final study, the fluids used during drilling of the bottom 100 m of emplacement borehole U-19bh were labeled with a chemical tracer. After hole completion, water level rose in the borehole, while tracer concentration decreased. In fact, total mass of tracer in the borehole remained constant, while water levels rose. After water levels stabilized in this hole, no change in tracer mass was observed over two years, indicating that no movement of water out of the borehole is taking place (as at U- 19ba). Continued labeling tests of standing water are recommended to confirm the conclusions made here, and to establish their validity throughout Pahute Mesa.

  9. InGaAsP/InP undercut mesa laser with planar polyimide passivation

    SciTech Connect (OSTI)

    Koren, U.; Chen, T.R.; Harder, C.; Hasson, A.; Yu, K.L.; Chiu, L.C.; Margalit, S.; Yariv, A.

    1983-03-01T23:59:59.000Z

    An undercut mesa laser is fabricated on an n/sup +/-InP substrate using a single step liquid phase epitaxy growth process and a planar structure is obtained by using a polyimide filling layer. The lasers operate at fundamental transverse mode due to a scattering loss mechanism. Threshold currents of 18 mA and stable single transverse mode operating at high currents are obtained.

  10. Variation in the annual average radon concentration measured in homes in Mesa County, Colorado

    SciTech Connect (OSTI)

    Rood, A.S.; George, J.L.; Langner, G.H. Jr.

    1990-04-01T23:59:59.000Z

    The purpose of this study is to examine the variability in the annual average indoor radon concentration. The TMC has been collecting annual average radon data for the past 5 years in 33 residential structures in Mesa County, Colorado. This report is an interim report that presents the data collected up to the present. Currently, the plans are to continue this study in the future. 62 refs., 3 figs., 12 tabs.

  11. Early Top Physics with ATLAS

    E-Print Network [OSTI]

    J. Schieck

    2009-01-12T23:59:59.000Z

    The ATLAS detector is one of the two multi-purpose experiments located at the Large Hadron Collider (LHC) at CERN and is expected to collect first collision data in summer 2009. Due to the large top-quark production cross-section the LHC will function as a top-quark factory allowing to measure top-quark properties even at initial luminosities. We present some recently-performed studies, focussing on measurements of the top pair and single top production cross-sections with the first fb-1 of data. The potential for the measurement of other top-quark properties like the mass will be also briefly discussed.

  12. Completion Report for Well ER-20-4 Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2011-04-30T23:59:59.000Z

    Well ER-20-4 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada National Security Site, Nye County, Nevada. The well was drilled in August and September 2010 as part of the Pahute Mesa Phase II drilling program. The primary purpose of the well was to investigate the possibility of radionuclide transport from up-gradient underground nuclear tests conducted in central Pahute Mesa. This well also provided detailed hydrogeologic information in the Tertiary volcanic section that will help reduce uncertainties within the Pahute Mesa-Oasis Valley hydrostratigraphic framework model.

  13. PV Module Reliability R&D Project Overview

    SciTech Connect (OSTI)

    Hulstrom, R. L.

    2005-01-01T23:59:59.000Z

    The DOE Solar Energy Technologies Program includes a sub-key activity entitled ''Photovoltaic Module Reliability R&D''. This activity has been in existence for several years to help ensure that the PV technologies that advance to the commercial module stage have acceptable service lifetimes and annual performance degradation rates. The long-term (2020) goal, as stated in the Solar Program Multi-Year Technical Plan [1], is to assist industry with the development of PV systems that have 30-year service lifetimes and 1% annual performance degradation rates. The corresponding module service lifetimes and annual performance degradation rate would have to be 30 years lifetime and approximately 0.5% (or less, depending on the type of PV system) annual performance degradation. Reaching this goal is critical to achieving the PV technology Levelized Energy Cost Targets, as listed and described in the Solar Program Multi-Year Technical Plan. This paper is an overview of the Module Reliability R&D sub-key activity. More details and the major results and accomplishments are covered in the papers presented in the PV Module Reliability Session of the DOE Solar Energy Technology Review Meeting, October 25-28, 2004, in Denver, Colorado.

  14. Top Management Involvement in the Adoption of Energy Efficiency Projects

    E-Print Network [OSTI]

    Blass, Vered; Corbett, Charles J.; Delmas, Magali A; Muthulingam, Suresh

    2011-01-01T23:59:59.000Z

    of Recommendations Top Management * Energy Costs/Sales TopTop Management Top Management * Energy Costs/Sales TopTop Management Top Management * Energy Costs/Sales Top

  15. PV Cell and Module Calibration Activities at NREL

    SciTech Connect (OSTI)

    Emery, K.; Anderberg, A.; Kiehl, J.; Mack, C.; Moriarty, T.; Ottoson, L.; Rummel, S.

    2005-11-01T23:59:59.000Z

    The performance of PV cells and modules with respect to standard reference conditions is a key indicator of progress of a given technology. This task provides the U.S. terrestrial PV community with the most accurate measurements that are technically possible in a timely fashion. The international module certification and accreditation program PVGap requires certification laboratories to maintain their calibration traceability path to groups like this one. The politics of a "world record" efficiency requires that an independent laboratory perform these measurements for credibility. Most manufacturers base their module peak watt rating upon standards and reference cells calibrated under this task. This task has been involved in reconciling disputes between manufacturers and their cell suppliers in terms of expected versus actual performance. This task has also served as a resource to the PV community for consultation on solar simulation, current versus voltage measurement instrumentation, measurement procedures and measurement artifacts.

  16. Metabolomic and transcriptomic analysis of the rice response to the bacterial blight pathogen Xanthomonas oryzae pv. oryzae

    E-Print Network [OSTI]

    2010-01-01T23:59:59.000Z

    system in Xanthomonas oryzae pv. oryzae required for AvrXa212002). The Xanthomonas oryzae pv. lozengeoryzae raxP andPf1 against Xanthomo- nas oryzae pv. oryzae in rice leaves.

  17. Encouraging PV Adoption in New Market-Rate Residential Construction: A Critical Review of Program Experiences to Date

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-01-01T23:59:59.000Z

    ENCOURAGING PV ADOPTION IN NEW MARKET-RATE RESIDENTIALdeployment of photovoltaics (PV) in new, market-rate homes,the new home market for PV. feature in new developments

  18. Metabolomic and transcriptomic analysis of the rice response to the bacterial blight pathogen Xanthomonas oryzae pv. oryzae.

    E-Print Network [OSTI]

    2010-01-01T23:59:59.000Z

    system in Xanthomonas oryzae pv. oryzae required for AvrXa212002). The Xanthomonas oryzae pv. lozengeoryzae raxP andPf1 against Xanthomo- nas oryzae pv. oryzae in rice leaves.

  19. Marker-exchange mutagenesis and complementation strategies for the Gram-negative bacteria Xanthomonas oryzae pv. oryzae.

    E-Print Network [OSTI]

    Lee, Sang-Won; Ronald, P C

    2006-01-01T23:59:59.000Z

    of a Xanthomonas oryzae pv. oryzae flagellar operon region2002) The Xanthomonas oryzae pv. lozengeoryzae raxP and raxQsystem in xanthomonas oryzae pv. oryzae required for AvrXa21

  20. Designing PV Incentive Programs to Promote Performance: A Review of Current Practice in the U.S.

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2008-01-01T23:59:59.000Z

    with Large-scale Implementation of Domestic PV Systems andwith Large PV Systems on Buildings in Japan. Progress inPerformance of Grid-connected PV Systems on Buildings in

  1. Designing PV Incentive Programs to Promote Performance: A Review of Current Practice in the U.S.

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2008-01-01T23:59:59.000Z

    systems: UL-1703 for PV modules and UL- 1741 for inverters andinverters). PV program administrators have sought to weed out poorly-designed systemsPV system at a discounted price. Efficiency rating for each inverter

  2. Designing PV Incentive Programs to Promote Performance: A Review of Current Practice in the U.S.

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2008-01-01T23:59:59.000Z

    manufacturers of PV modules and inverters are to determineUL-1703 for PV modules and UL- 1741 for inverters and otherand the sizing of the inverters). PV program administrators

  3. Top Physics at the LHC

    E-Print Network [OSTI]

    P. de Jong

    2009-02-27T23:59:59.000Z

    The LHC will be a top quark factory. In this note, the central role of the top quark for LHC physics will be discussed, and an overview will be given of the studies of top quark properties in preparation, with an emphasis on the systematic uncertainties that will dominate most measurements.

  4. Top Jets at the LHC

    E-Print Network [OSTI]

    Almeida, L.G.

    2009-01-01T23:59:59.000Z

    Top Jets at the LHC Leandro G. Almeida, Seung J. Lee, GiladSB-08-37; WIS/17/08-SEPT-DPP Top Jets at the LHC Leandro G.p T hadronically-decaying top quarks at the Large Hadron

  5. Top-ophilia Chris Quigg

    E-Print Network [OSTI]

    Quigg, Chris

    Top-ophilia Chris Quigg Theoretical Physics Department, Fermi National Accelerator Laboratory P.O. Box 500, Batavia, Illinois 60510 USA January 11, 2008 1 Room for the Top Almost from the moment, it became clear that the top quark must exist. Exactly at what mass, we couldn't say, but we knew just how

  6. Top physics results at CDF

    SciTech Connect (OSTI)

    Vickey, Trevor; /Illinois U., Urbana

    2005-05-01T23:59:59.000Z

    The most recent results on top quark physics at CDF are reported. Measurements of cross-section and mass are presented, and the status of single top quark production searches are discussed. The results obtained from probing various top quark properties are also presented.

  7. Completion Report for Well ER-EC-12 Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2011-04-30T23:59:59.000Z

    Well ER-EC-12 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada National Security Site (formerly known as the Nevada Test Site), Nye County, Nevada. The well was drilled in June and July 2010 as part of the Pahute Mesa Phase II drilling program. The primary purpose of the well was to provide detailed hydrogeologic information in the Tertiary volcanic section in the area between Pahute Mesa and the Timber Mountain caldera complex that will help address uncertainties within the Pahute Mesa–Oasis Valley hydrostratigraphic model. In particular, the well was intended to help define the structural position and hydraulic parameters for volcanic aquifers potentially down-gradient from historic underground nuclear tests on Pahute Mesa. It may also be used as a long-term monitoring well.

  8. A PLAUSIBLE TWO-DIMENSIONAL VERTICAL MODEL OF THE EAST MESA GEOTHERMAL FIELD, CALIFORNIA, U.S.A

    E-Print Network [OSTI]

    Goyal, K.P.

    2013-01-01T23:59:59.000Z

    report on East Mesa and Cerro Prieto Geothermal Fields, LA-of core samples from the Cerro Prieto Geothermal Field:L, x 10 cal/ cm~sec~ K in the Cerro Prieto geothermal field,

  9. Completion Report for Well ER-EC-15 Corrective Action Units 101 and 102: Central and Western Pahute Mesa

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2011-05-31T23:59:59.000Z

    Well ER-EC-15 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Nevada Environmental Restoration Project at the Nevada National Security Site (formerly known as the Nevada Test Site), Nye County, Nevada. The well was drilled in October and November 2010, as part of the Pahute Mesa Phase II drilling program. The primary purpose of the well was to provide detailed hydrogeologic information in the Tertiary volcanic section in the area between Pahute Mesa and the Timber Mountain caldera complex that will help address uncertainties within the Pahute Mesa–Oasis Valley hydrostratigraphic model. In particular, the well was intended to help define the structural position and hydraulic parameters of volcanic aquifers potentially down-gradient from underground nuclear tests on Pahute Mesa. It may also be used as a long-term monitoring well.

  10. Facies, depositional environments, and reservoir properties of the Shattuck sandstone, Mesa Queen Field and surrounding areas, southeastern New Mexico

    E-Print Network [OSTI]

    Haight, Jared

    2004-09-30T23:59:59.000Z

    The Shattuck Sandstone Member of the Guadalupian age Queen Formation was deposited in back-reef environments on a carbonate platform of the Northwest Shelf (Permian Basin, New Mexico, USA) during a lowstand of sea level. At Mesa Queen Field...

  11. Time series power flow analysis for distribution connected PV generation.

    SciTech Connect (OSTI)

    Broderick, Robert Joseph; Quiroz, Jimmy Edward; Ellis, Abraham; Reno, Matthew J. [Georgia Institute of Technology, Atlanta, GA; Smith, Jeff [Electric Power Research Institute, Knoxville, TN; Dugan, Roger [Electric Power Research Institute, Knoxville, TN

    2013-01-01T23:59:59.000Z

    Distributed photovoltaic (PV) projects must go through an interconnection study process before connecting to the distribution grid. These studies are intended to identify the likely impacts and mitigation alternatives. In the majority of the cases, system impacts can be ruled out or mitigation can be identified without an involved study, through a screening process or a simple supplemental review study. For some proposed projects, expensive and time-consuming interconnection studies are required. The challenges to performing the studies are twofold. First, every study scenario is potentially unique, as the studies are often highly specific to the amount of PV generation capacity that varies greatly from feeder to feeder and is often unevenly distributed along the same feeder. This can cause location-specific impacts and mitigations. The second challenge is the inherent variability in PV power output which can interact with feeder operation in complex ways, by affecting the operation of voltage regulation and protection devices. The typical simulation tools and methods in use today for distribution system planning are often not adequate to accurately assess these potential impacts. This report demonstrates how quasi-static time series (QSTS) simulation and high time-resolution data can be used to assess the potential impacts in a more comprehensive manner. The QSTS simulations are applied to a set of sample feeders with high PV deployment to illustrate the usefulness of the approach. The report describes methods that can help determine how PV affects distribution system operations. The simulation results are focused on enhancing the understanding of the underlying technical issues. The examples also highlight the steps needed to perform QSTS simulation and describe the data needed to drive the simulations. The goal of this report is to make the methodology of time series power flow analysis readily accessible to utilities and others responsible for evaluating potential PV impacts.

  12. Supercomputing Challenge top winners: Los Alamos schools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supercomputing Challenge top winners: Los Alamos schools Supercomputing Challenge top winners: Los Alamos schools Cole Kendrick won the top prize for his research project,...

  13. Toward integrated PV panels and power electronics using printing technologies

    SciTech Connect (OSTI)

    Ababei, Cristinel; Yuvarajan, Subbaraya [Electrical and Computer Engineering Department, North Dakota State University, Fargo, ND 58108 (United States); Schulz, Douglas L. [Center for Nanoscale Science and Engineering, North Dakota State University, Fargo, ND 58102 (United States)

    2010-07-15T23:59:59.000Z

    In this paper, we review the latest developments in the area of printing technologies with an emphasis on the fabrication of control-embedded photovoltaics (PV) with on-board active and passive devices. We also review the use of power converters and maximum power point tracking (MPPT) circuits with PV panels. Our focus is on the investigation of the simplest implementations of such circuits in view of their integration with solar cells using printing technologies. We see this concept as potentially enabling toward further cost reduction. Besides a discussion as to feasibility, we shall also present some projections and guidelines toward possible integration. (author)

  14. Outdoor PV Module Degradation of Current-Voltage Parameters: Preprint

    SciTech Connect (OSTI)

    Smith, R. M.; Jordan, D. C.; Kurtz, S. R.

    2012-04-01T23:59:59.000Z

    Photovoltaic (PV) module degradation rate analysis quantifies the loss of PV power output over time and is useful for estimating the impact of degradation on the cost of energy. An understanding of the degradation of all current-voltage (I-V) parameters helps to determine the cause of the degradation and also gives useful information for the design of the system. This study reports on data collected from 12 distinct mono- and poly-crystalline modules deployed at the National Renewable Energy Laboratory (NREL) in Golden, Colorado. Most modules investigated showed < 0.5%/year decrease in maximum power due to short-circuit current decline.

  15. Testing of Packaging Materials for Improved PV Module Reliability

    SciTech Connect (OSTI)

    Jorgensen, G. J.; Terwilliger, K. M.; Kempe, M. D.; McMahon, T. J.

    2005-02-01T23:59:59.000Z

    A number of candidate alternative encapsulant and soft backsheet materials have been evaluated in terms of their suitability for photovoltaic (PV) module packaging applications. Relevant properties, including interfacial adhesion and moisture transport, have been measured as a function of damp-heat (85 C/85% relative humidity) exposure. Based on these tests, promising new encapsulants with improved properties have been identified. Backsheets prepared by industry and at NREL have been found to provide varying levels of moisture ingress protection. To achieve significantly improved products, further development of these candidates is ongoing. The relative effectiveness of various packaging strategies to protect PV devices has also been investigated.

  16. Amp-hour counting control for PV hybrid power systems

    SciTech Connect (OSTI)

    Hund, T.D. [Sandia National Labs., Albuquerque, NM (United States); Thompson, B. [Biri Systems, Ithaca, NY (United States)

    1997-06-01T23:59:59.000Z

    The performance of an amp-hour (Ah) counting battery charge control algorithm has been defined and tested using the Digital Solar Technologies MPR-9400 microprocessor based PV hybrid charge controller. This work included extensive field testing of the charge algorithm on flooded lead-antimony and valve regulated lead-acid (VRLA) batteries. The test results after one-year have demonstrated that PV charge utilization, battery charge control, and battery state of charge (SOC) has been significantly improved by providing maximum charge to the batteries while limiting battery overcharge to manufacturers specifications during variable solar resource and load periods.

  17. Top Quark Pair Production in Early CMS Data

    E-Print Network [OSTI]

    Kao, Shih-Chuan

    2011-01-01T23:59:59.000Z

    23 2.13 top decay . . . . . . . . . . . . .of the Top Quark . . . . . . . . . . . . . . . . . . . . .20 Top Production in Hadron

  18. High-luminosity primary vertex selection in top-quark studies using the Collider Detector at Fermilab

    SciTech Connect (OSTI)

    Buzatu, Adrian; /McGill U.

    2006-08-01T23:59:59.000Z

    Improving our ability to identify the top quark pair (t{bar t}) primary vertex (PV) on an event-by-event basis is essential for many analyses in the lepton-plus-jets channel performed by the Collider Detector at Fermilab (CDF) Collaboration. We compare the algorithm currently used by CDF (A1) with another algorithm (A2) using Monte Carlo simulation at high instantaneous luminosities. We confirm that A1 is more efficient than A2 at selecting the t{bar t} PV at all PV multiplicities, both with efficiencies larger than 99%. Event selection rejects events with a distance larger than 5 cm along the proton beam between the t{bar t} PV and the charged lepton. We find flat distributions for the signal over background significance of this cut for all cut values larger than 1 cm, for all PV multiplicities and for both algorithms. We conclude that any cut value larger than 1 cm is acceptable for both algorithms under the Tevatron's expected instantaneous luminosity improvements.

  19. Transcriptional regulation of seed-specific gene expression - from PvALF/ ABI3 to phaseolin

    E-Print Network [OSTI]

    Ng, Wang Kit

    2006-10-30T23:59:59.000Z

    the inactive state in transgenic Arabidopsis leaves was accomplished by ectopic expression of the transcription factor PvALF (Phaseolus vulgaris ABI3-like factor), and application of abscisic acid (ABA). PvALF belongs to a family of seed...

  20. Designing PV Incentive Programs to Promote System Performance: A Review of Current Practice

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-01-01T23:59:59.000Z

    2006. Celentano, Ron. 2005. “SDF Solar PV Grant Program inSustainable Development Fund (SDF) Rhode Island RenewableOH – DOD OR – ETO PA – SDF RI – RIREF Small PV Program RI –

  1. Interline photovoltaic (I-PV) power plants for voltage unbalance compensation

    E-Print Network [OSTI]

    Moawwad, Ahmed

    This paper proposes a stationary-frame control method for voltage unbalance compensation using Interline Photovoltaic (I-PV) power system. I-PV power systems are controlled to compensate voltage unbalance autonomously. The ...

  2. Delamination Failures in Long-Term Field Aged PV Modules from...

    Office of Environmental Management (EM)

    Delamination Failures in Long-Term Field Aged PV Modules from Point of View of Encapsulant Delamination Failures in Long-Term Field Aged PV Modules from Point of View of...

  3. Integration of Behind-the-Meter PV Fleet Forecasts into Utility...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integration of Behind-the-Meter PV Fleet Forecasts into Utility Grid System Operations Integration of Behind-the-Meter PV Fleet Forecasts into Utility Grid System Operations Clean...

  4. Dynamic Model Validation of PV Inverters Under Short-Circuit Conditions: Preprint

    SciTech Connect (OSTI)

    Muljadi, E.; Singh, M.; Bravo, R.; Gevorgian, V.

    2013-03-01T23:59:59.000Z

    Photovoltaic (PV) modules have dramatically decreased in price in the past few years, spurring the expansion of photovoltaic deployment. Residential and commercial rooftop installations are connected to the distribution network; large-scale installation PV power plants (PVPs) have benefited from tax incentives and the low cost of PV modules. As the level penetration of PV generation increases, the impact on power system reliability will also be greater. Utility power system planners must consider the role of PV generation in power systems more realistically by representing PV generation in dynamic stability analyses. Dynamic models of PV inverters have been developed in the positive sequence representation. NREL has developed a PV inverter dynamic model in PSCAD/EMTDC. This paper validates the dynamic model with an actual hardware bench test conducted by Southern California Edison's Distributed Energy Resources laboratory. All the fault combinations -- symmetrical and unsymmetrical -- were performed in the laboratory. We compare the simulation results with the bench test results.

  5. Interline Photovoltaic (I-PV) power system - A novel concept of power flow control and management

    E-Print Network [OSTI]

    Khadkikar, Vinod

    This paper presents a new system configuration for a large-scale Photovoltaic (PV) power system with multi-line transmission/distribution networks. A PV power plant is reconfigured in a way that two adjacent power system ...

  6. Climatically Diverse Data Set for Flat-Plate PV Module Model Validations (Presentation)

    SciTech Connect (OSTI)

    Marion, B.

    2013-05-01T23:59:59.000Z

    Photovoltaic (PV) module I-V curves were measured at Florida, Colorado, and Oregon locations to provide data for the validation and development of models used for predicting the performance of PV modules.

  7. ELEG620: Solar Electric Systems University of Delaware, ECE Spring 2008 C. Honsberg PV System Components

    E-Print Network [OSTI]

    Honsberg, Christiana

    · Batteries required if (1) load profile solar radiation profile and (2) to mitigate effect of variability · PV System components: ­ PV Modules ­ Batteries ­ Power Conditioning ­ Loads ­ Balance of systems #12

  8. Energy and Society (ER100/PP184/ER200/PP284) Topics: PV, Wind, environmental justice

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Energy and Society (ER100/PP184/ER200/PP284) Topics: PV, Wind, environmental justice Due Nov. 21) Topics: PV, Wind, environmental justice Due Nov. 21, in class, or before 5pm outside 310 Barrows Fall

  9. Top quark physics at CDF

    E-Print Network [OSTI]

    Karolos Potamianos

    2011-12-01T23:59:59.000Z

    We present the recent results of top-quark physics using up to 6 fb$^{-1}$ of $p\\bar{p}$ collisions analyzed by the CDF collaboration. The large number of top quark events analyzed, of the order of several thousands, allows stringent checks of the standard model predictions. Also, the top quark is widely believed to be a window to new physics. We present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  10. Top quark physics at CDF

    SciTech Connect (OSTI)

    Potamianos, Karolos

    2011-12-01T23:59:59.000Z

    We present the recent results of top-quark physics using up to 6 fb{sup -1} of p{bar p} collisions analyzed by the CDF collaboration. The large number of top quark events analyzed, of the order of several thousands, allows stringent checks of the standard model predictions. Also, the top quark is widely believed to be a window to new physics. We present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  11. Berkeley Program Offers New Option for Financing Residential PV Systems

    SciTech Connect (OSTI)

    Bolinger, Mark A

    2008-07-06T23:59:59.000Z

    Readily accessible credit has often been cited as a necessary ingredient to open up the market for residential photovoltaic (PV) systems. Though financing does not reduce the high up-front cost of PV, by spreading that cost over some portion of the system's life, financing can certainly make PV systems more affordable. As a result, a number of states have, in the past, set up special residential loan programs targeting the installation of renewable energy systems and/or energy-efficiency improvements and often featuring low interest rates, longer terms and no-hassle application requirements. Historically, these loan programs have had mixed success (particularly for PV), for a variety of reasons, including a historical lack of homeowner interest in PV, a lack of program awareness, a reduced appeal in a low-interest-rate environment, and a tendency for early PV adopters to be wealthy and not in need of financing. Some of these barriers have begun to fade. Most notably, homeowner interest in PV has grown in some states, particularly those that offer solar rebates. The passage of the Energy Policy Act of 2005 (EPAct 2005), however, introduced one additional roadblock to the success of low-interest PV loan programs: a residential solar investment tax credit (ITC), subject to the Federal government's 'anti-double-dipping' rules. Specifically, the residential solar ITC--equal to 30% of the system's tax basis, capped at $2000--will be reduced or offset if the system also benefits from what is known as 'subsidized energy financing', which is likely to include most government-sponsored low-interest loan programs. Within this context, it has been interesting to note the recent flurry of announcements from a number of U.S cities concerning a new type of PV financing program. Led by the city of Berkeley, Calif., these cities propose to offer their residents the ability to finance the installation of a PV system using increased property tax assessments, rather than a more-traditional credit vehicle, to recover both system and administrative costs. This approach has a number of features that should appeal to PV owners, including long-term, fixed-cost, attractive financing; loans that are tied to the tax capacity of the property rather than to the owner's credit standing; a repayment obligation that transfers along with the sale of the property; and a potential ability to deduct the repayment obligation from federal taxable income as part of the local property tax deduction. For these reasons, Berkeley's program, which was first announced on October 23, 2007, has received considerable nationwide attention in both the trade and general press. Since the announcement, cities from throughout California and the broader U.S. have expressed keen interest in the possibility of replicating this type of program. In California alone, the cities of Santa Cruz, Santa Monica and Palm Desert are all reportedly considering similar programs, while the city of San Francisco has recently announced its own program, portions of which closely parallel Berkeley's approach. In addition, a bill (AB 811) that would authorize all cities in California, not just charter cities like Berkeley, to create this type of program was approved by the California General Assembly on January 29 and is currently under consideration in the State Senate. A similar bill in Colorado (HB 1350) was signed into law on May 28. Elsewhere, the city of Tucson, Arizona has also considered this financing approach.

  12. Modular Power Converters for PV Applications

    SciTech Connect (OSTI)

    Ozpineci, Burak [ORNL; Tolbert, Leon M [ORNL

    2012-05-01T23:59:59.000Z

    This report describes technical opportunities to serve as parts of a technological roadmap for Shoals Technologies Group in power electronics for PV applications. There are many different power converter circuits that can be used for solar inverter applications. The present applications do not take advantage of the potential for using common modules. We envision that the development of a power electronics module could enable higher reliability by being durable and flexible. Modules would have fault current limiting features and detection circuits such that they can limit the current through the module from external faults and can identify and isolate internal faults such that the remaining modules can continue to operate with only minimal disturbance to the utility or customer. Development of a reliable, efficient, low-cost, power electronics module will be a key enabling technology for harnessing more power from solar panels and enable plug and play operation. Power electronics for computer power supplies, communication equipment, and transportation have all targeted reliability and modularity as key requirements and have begun concerted efforts to replace monolithic components with collections of common smart modules. This is happening on several levels including (1) device level with intelligent control, (2) functional module level, and (3) system module. This same effort is needed in power electronics for solar applications. Development of modular units will result in standard power electronic converters that will have a lower installed and operating cost for the overall system. These units will lead to increased adaptability and flexibility of solar inverters. Incorporating autonomous fault current limiting and reconfiguration capabilities into the modules and having redundant modules will lead to a durable converter that can withstand the rigors of solar power generation for more than 30 years. Our vision for the technology roadmap is that there is no need for detailed design of new power converters for each new application or installation. One set of modules and controllers can be pre-developed and the only design question would be how many modules need to be in series or parallel for the specific power requirement. Then, a designer can put the modules together and add the intelligent reconfigurable controller. The controller determines how many modules are connected, but it might also ask for user input for the specific application during setup. The modules include protection against faults and can reset it, if necessary. In case of a power device failure, the controller reconfigures itself to continue limited operation until repair which might be as simple as taking the faulty module out and inserting a new module. The result is cost savings in design, maintenance, repair, and a grid that is more reliable and available. This concept would be a perfect fit for the recently announced funding opportunity announcement (DE-FOA-0000653) on Plug and Play Photovoltaics.

  13. Rethinking Standby & Fixed Cost Charges: Regulatory & Rate Design Pathways to Deeper Solar PV Cost Reductions

    Broader source: Energy.gov [DOE]

    While solar PV's impact on utilities has been frequently discussed the past year, little attention has been paid to the potentially impact posed by solar PV-specific rate designs (often informally referred to as solar "fees" or "taxes") upon non-hardware "soft" cost reductions. In fact, applying some rate designs to solar PV customers could potentially have a large impact on the economics of PV systems.

  14. backfed from utility-interactive PV inverters. This equation expresses this ratings requirement

    E-Print Network [OSTI]

    Johnson, Eric E.

    backfed from utility-interactive PV inverters. This equation expresses this ratings requirement: PV Changing Codes & Grid Connection by John Wiles PV Inverter 15 A 100 A 400 A 100 A 400 A 1,000 A Grid 100 to at least 1,400 A (400 + 1,000 > 1,000) - - - PV Inverter 15 A 100 A 400 A 100 A 400 A 1,000 A Grid 100 A 10

  15. U.S. Aims for Zero-Energy: Support for PV on New Homes

    E-Print Network [OSTI]

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-01-01T23:59:59.000Z

    PV in new homes, dubbed the Solar Advantage Homes Program, through which SMUD purchased BIPV systems and inverters

  16. Top quark pair production and top quark properties at CDF

    E-Print Network [OSTI]

    Chang-Seong Moon

    2014-11-01T23:59:59.000Z

    We present the most recent measurements of top quark pairs production and top quark properties in proton-antiproton collisions with center-of-mass energy of 1.96 TeV using CDF II detector at the Tevatron. The combination of top pair production cross section measurements and the direct measurement of top quark width are reported. The test of Standard Model predictions for top quark decaying into $b$-quarks, performed by measuring the ratio $R$ between the top quark branching fraction to $b$-quark and the branching fraction to any type of down quark is shown. The extraction of the CKM matrix element $|V_{tb}|$ from the ratio $R$ is discussed. We also present the latest measurements on the forward-backward asymmetry ($A_{FB}$) in top anti-top quark production. With the full CDF Run II data set, the measurements are performed in top anti-top decaying to final states that contain one or two charged leptons (electrons or muons). In addition, we combine the results of the leptonic forward-backward asymmetry in $t\\bar t$ system between the two final states. All the results show deviations from the next-to-leading order (NLO) standard model (SM) calculation.

  17. Computing Z_top

    E-Print Network [OSTI]

    Amir-Kian Kashani-Poor

    2014-08-06T23:59:59.000Z

    This is the text of my habilitation thesis defended at the \\'Ecole Normale Sup\\'erieure. The topological string presents an arena in which many features of string theory proper, such as the interplay between worldsheet and target space descriptions or open-closed duality, can be distilled into computational techniques which yield results beyond perturbation theory. In this thesis, I will summarize my research activity in this area. The presentation is organized around computations of the topological string partition function Z_top based on various perspectives on the topological string.

  18. THE DEVELOPMENT AND COMMERCIALIZATION OF SOLAR PV TECHNOLOGY IN THE OIL Jonatan Pinksea,b

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    THE DEVELOPMENT AND COMMERCIALIZATION OF SOLAR PV TECHNOLOGY IN THE OIL INDUSTRY Jonatan Pinksea regarding solar PV technology investments, a renewable energy technology that has seen explosive growth towards the development and commercialization of solar PV technology. To investigate this, a multiple case

  19. Response to Xanthomonas campestris pv. vesicatoria in Tomato Involves Regulation of Ethylene Receptor

    E-Print Network [OSTI]

    Klee, Harry J.

    Response to Xanthomonas campestris pv. vesicatoria in Tomato Involves Regulation of Ethylene ethylene's role in plant response to virulent and avirulent strains of Xanthomonas campestris pv overexpressing a wild-type NR cDNA were infected with virulent X. campestris pv. vesicatoria. Like the Nr mutant

  20. Put-Call Parity (Castelli, 1877) C = P + S -PV(X). (19)

    E-Print Network [OSTI]

    Lyuu, Yuh-Dauh

    Put-Call Parity (Castelli, 1877) C = P + S - PV(X). (19) · Consider the portfolio of one short European call, one long European put, one share of stock, and a loan of PV(X). · All options are assumed - S + PV(X). c 2010 Prof. Yuh-Dauh Lyuu, National Taiwan University Page 185 #12;The Proof (continued

  1. Environmental impacts of large-scale grid-connected ground-mounted PV installations

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Environmental impacts of large-scale grid-connected ground-mounted PV installations Antoine Beylota-scale ground-mounted PV installations by considering a life-cycle approach. The methodology is based. Mobile PV installations with dual-axis trackers show the largest impact potential on ecosystem quality

  2. RETI Phase 1B Final Report Update NET SHORT RECALCULATION AND NEW PV ASSUMPTIONS

    E-Print Network [OSTI]

    RETI Phase 1B Final Report Update NET SHORT RECALCULATION AND NEW PV ASSUMPTIONS With Revisions distributed photovoltaic (PV) installations in the Report is unclear and perhaps misleading. At the direction-generation is required. The CEC forecast assumed that 1,082 GWh will be self-generated by consumers from new PV

  3. The figure shows the current energy pay back time for PV

    E-Print Network [OSTI]

    The figure shows the current energy pay back time for PV systems using different cell technologies and installed either in Central Europe or Southern Europe. Argument B1 PV Fact Sheets Technology improvements: Manufacturing a PV system consumes more energy than it ever produces in its life time." The fact is

  4. Design and Evaluation of a Modular Resonant Switched Capacitors Equalizer for PV Panels

    E-Print Network [OSTI]

    Design and Evaluation of a Modular Resonant Switched Capacitors Equalizer for PV Panels Shmuel (Sam of shaded panels in a serially connected PV array. The proposed solution is based on a modular approach module was designed for 185W PV panels and was found to boost the maximum available power by about 50

  5. agronomie: agriculture and environment Dtection d'Erwinia chrysanthemi pv dianthicola

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    agronomie: agriculture and environment Détection d'Erwinia chrysanthemi pv dianthicola par le test — L'indexage des boutures d'śillet vis-ŕ-vis d'Erwinia chrysanthemi pv dianthicola (Ech son exploitation ŕ grande échelle sont discutés sur le plan technique. Erwinia chrysanthemi pv

  6. VALIDATION OF PV PERFORMANCE MODELS USING SATELLITE-BASED IRRADIANCE MEASUREMENTS: A CASE STUDY

    E-Print Network [OSTI]

    Perez, Richard R.

    VALIDATION OF PV PERFORMANCE MODELS USING SATELLITE-BASED IRRADIANCE MEASUREMENTS: A CASE STUDY Clean Power Research Kirkland, WA e-mail: aparkins@cleanpower.com ABSTRACT Photovoltaic (PV) system and existing PV systems under a wide variety of environmental conditions. Ground based meteorological

  7. Chapter 6: Innovation-Focused Policy Framework for TW-Scale PV Deployment

    E-Print Network [OSTI]

    Kammen, Daniel M.

    1 Chapter 6: Innovation-Focused Policy Framework for TW-Scale PV Deployment 6.1. Demand, and installation, which all have one common goal: to reduce the cost of PV technology and make it an affordable & development (R&D). These policy instruments in the PV sector can be broadly categorized into two approaches

  8. QUALIFIED FORECAST OF ENSEMBLE POWER PRODUCTION BY SPATIALLY DISPERSED GRID-CONNECTED PV SYSTEMS

    E-Print Network [OSTI]

    Heinemann, Detlev

    QUALIFIED FORECAST OF ENSEMBLE POWER PRODUCTION BY SPATIALLY DISPERSED GRID- CONNECTED PV SYSTEMS: The contribution of power production by Photovoltaic (PV) systems to the electricity supply is constantly of the electricity grids and for energy trading. This paper presents an approach to predict regional PV power output

  9. Genomic Plasticity Enables Phenotypic Variation of Pseudomonas syringae pv. tomato DC3000

    E-Print Network [OSTI]

    Myers, Chris

    Genomic Plasticity Enables Phenotypic Variation of Pseudomonas syringae pv. tomato DC3000 Zhongmeng of a genomic anomaly in the region of 4.7 to 4.9 Mb of the Pseudomonas syringae pv. tomato (Pst) DC3000 genome in P. syringae. Citation: Bao Z, Stodghill PV, Myers CR, Lam H, Wei H-L, et al. (2014) Genomic

  10. Genome-Wide Identification of Transcriptional Start Sites in the Plant Pathogen Pseudomonas syringae pv. tomato

    E-Print Network [OSTI]

    Myers, Chris

    syringae pv. tomato str. DC3000 Melanie J. Filiatrault1,2 *, Paul V. Stodghill1,2 , Christopher R. Myers3 identified 59-ends of transcripts for the plant pathogen Pseudomonas syringae pv. tomato str. DC3000. Citation: Filiatrault MJ, Stodghill PV, Myers CR, Bronstein PA, Butcher BG, et al. (2011) Genome

  11. Evidence for Interhemispheric Processing of Inputs From the Hands in Human S2 and PV

    E-Print Network [OSTI]

    Krubitzer, Leah A.

    Evidence for Interhemispheric Processing of Inputs From the Hands in Human S2 and PV ELIZABETH S2 and PV. J Neurophysiol 85: 2236­2244, 2001. In the present investigation, we identified cortical somatosensory (S2) and the parietal ventral (PV) areas, was significantly larger for bilateral stimulation than

  12. PUBLISHED VERSION Workshop on performance variations in H ion sources 2012: PV H12

    E-Print Network [OSTI]

    PUBLISHED VERSION Workshop on performance variations in H ion sources 2012: PV H12 M. P. Stockli, D://dx.doi.org/10.1063/1.4792832 #12;Workshop on performance variations in H ion sources 2012: PV H12 M. P. Stockli Sources 2012: PV H- 120F * M. P. Stocklia , D. Fairclothb , W. Krausc , A. Andod , D. S. Bollingere , S

  13. OPTIMIZATION WITH ENERGY MANAGEMENT OF PV BATTERY STAND-ALONE SYSTEMS OVER THE ENTIRE LIFE CYCLE

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    of both the installed PV power and storage capacity (lead-acid battery technology for purposes). Keywords: Battery storage and control, Lifetime simulation, PV system. 1. INTRODUCTION Given the sizableOPTIMIZATION WITH ENERGY MANAGEMENT OF PV BATTERY STAND-ALONE SYSTEMS OVER THE ENTIRE LIFE CYCLE

  14. 78 IAEI NEWS September.October 2006 www.iaei.org penetrating pv questions from inspectors

    E-Print Network [OSTI]

    Johnson, Eric E.

    78 IAEI NEWS September.October 2006 www.iaei.org penetrating pv questions from inspectors B ased several calls and e-mails a week and sometimes several calls a day from inspectors looking at PV plans or inspecting PV systems. The questions that they pose are always challenging because most of the inspectors

  15. Optimal Perturbations in the Eady Model: Resonance versus PV Unshielding H. DE VRIES

    E-Print Network [OSTI]

    de Vries, Hylke

    Optimal Perturbations in the Eady Model: Resonance versus PV Unshielding H. DE VRIES Institute August 2004) ABSTRACT Using a nonmodal decomposition technique based on the potential vorticity (PV, such that the initial surface potential temperature (PT) is zero. These nonmodal structures are used as PV building

  16. Distributed Solar PV for Electricity System Resiliency: Policy and Regulatory Considerations (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-11-01T23:59:59.000Z

    Distributed Solar PV systems have the potential of increasing the grid's resiliency to unforeseen events, such as extreme weather events and attacks. This paper presents the role that distributed PV can play in electric grid resiliency, introduces basic system design requirements and options, and discusses the regulatory and policy options for supporting the use of distributed PV for the purpose of increased electricity resiliency.

  17. 16 IAEI NEWS September . October 2010 www.iaei.org prospectives on pv

    E-Print Network [OSTI]

    Johnson, Eric E.

    restrictions. In utility-interactive PV systems, the inverter can be greatly simplified to a conceptual system are ungrounded, the PV utili- ty-interactive inverter can be relatively simple compared to what16 IAEI NEWS September . October 2010 www.iaei.org prospectives on pv Ungrounded Electrical Systems

  18. Hawaii Natural Energy Institute installs PV systems at public schools Pacific Business News

    E-Print Network [OSTI]

    the performance of traditional and emerging PV materials and inverter technologies," Institute Director Richard of the inverters, which convert direct current or DC power generated by the PV panels into alternating currentHawaii Natural Energy Institute installs PV systems at public schools Pacific Business News

  19. 80 IAEI NEWS March.April 2008 www.iaei.org COMMON PV CODE VIOLATIONS

    E-Print Network [OSTI]

    Johnson, Eric E.

    into 2008, the PV industry continues to grow by leaps and bounds. New module and inverter manufacturers of un- grounded PV arrays (see 690.35) that will be used with transformerless inverters, and those80 IAEI NEWS March.April 2008 www.iaei.org COMMON PV CODE VIOLATIONS by John Wiles A s we move

  20. Remote and Centralized Monitoring of PV Power Csaba Kopacz, Sergiu Spataru, Dezso Sera, and Tamas Kerekes

    E-Print Network [OSTI]

    Sera, Dezso

    curve measurements from the inverters within each PV plant. The monitoring software stores the PVRemote and Centralized Monitoring of PV Power Plants Csaba Kopacz, Sergiu Spataru, Dezso Sera-cost and flexible monitoring system for PV plants. Compared to classical solutions which can require dedicated

  1. 2 IAEI NEWS January.February 2005 www.iaei.org PERSPECTIVES ON PV

    E-Print Network [OSTI]

    Johnson, Eric E.

    to ease installation and are used in PV systems for battery cables, power conductors to large utility2 IAEI NEWS January.February 2005 www.iaei.org PERSPECTIVES ON PV T he use of fine stranded" industries like the photovoltaic (PV) industry, the fuel cell indus- try, and the uninterruptible power

  2. Keywords: Photovoltaic System, fault-tolerance, recon-figurable PV panel

    E-Print Network [OSTI]

    Pedram, Massoud

    plants, and satellites. The output power of a PV cell (also called solar cell) is dependent on the solar: naehyuck@elpl.snu.ac.kr). output power of a PV cell increases as solar irradiance increases and temperature irradiance level and temperature. Figure 1 shows PV cell output current-voltage and power

  3. Actinide Sorption in Rainier Mesa Tunnel Waters from the Nevada Test Site

    SciTech Connect (OSTI)

    Zhao, P; Zavarin, M; Leif, R; Powell, B; Singleton, M; Lindvall, R; Kersting, A

    2007-12-17T23:59:59.000Z

    The sorption behavior of americium (Am), plutonium (Pu), neptunium (Np), and uranium (U) in perched Rainier Mesa tunnel water was investigated. Both volcanic zeolitized tuff samples and groundwater samples were collected from Rainier Mesa, Nevada Test Site, NV for a series of batch sorption experiments. Sorption in groundwater with and without the presence of dissolved organic matter (DOM) was investigated. Am(III) and Pu(IV) are more soluble in groundwater that has high concentrations of DOM. The sorption K{sub d} for Am(III) and Pu(IV) on volcanic zeolitized tuff was up to two orders of magnitude lower in samples with high DOM (15 to 19 mg C/L) compared to samples with DOM removed (< 0.4 mg C/L) or samples with naturally low DOM (0.2 mg C/L). In contrast, Np(V) and U(VI) sorption to zeolitized tuff was much less affected by the presence of DOM. The Np(V) and U(VI) sorption Kds were low under all conditions. Importantly, the DOM was not found to significantly sorb to the zeolitized tuff during these experiment. The concentration of DOM in groundwater affects the transport behavior of actinides in the subsurface. The mobility of Am(III) and Pu(IV) is significantly higher in groundwater with elevated levels of DOM resulting in potentially enhanced transport. To accurately model the transport behavior of actinides in groundwater at Rainier Mesa, the low actinide Kd values measured in groundwater with high DOM concentrations must be incorporated in predictive transport models.

  4. Opto-acoustic interactions in gravitational wave detectors: Comparing flat-top beams with Gaussian beams

    SciTech Connect (OSTI)

    Gras, S.; Blair, D. G.; Ju, L. [School of Physics, University of Western Australia, 35 Stirling Highway, Crawley, WA 6009 (Australia)

    2010-02-15T23:59:59.000Z

    To reduce the thermal noise in the future generation of gravitational wave detectors, flat-top beams have been proposed to replace conventional Gaussian beams, so as to obtain better averaging over the Brownian motion of the test masses. Here, we present a detailed investigation of the unwanted opto-acoustic interactions in such interferometers, which can lead to the phenomenon of parametric instability. Our results show that the increased overlap of the Mesa beams with the test masses leads to approximately 3 times as many unstable modes in comparison to a similar interferometer with Gaussian beams.

  5. Top-Higgs and Top-pion phenomenology in the Top Triangle Moose model

    E-Print Network [OSTI]

    R. Sekhar Chivukula; Baradhwaj Coleppa; Heather E. Logan; Adam Martin; Elizabeth H. Simmons

    2011-01-31T23:59:59.000Z

    We discuss the deconstructed version of a topcolor-assisted technicolor model wherein the mechanism of top quark mass generation is separated from the rest of electroweak symmetry breaking. The minimal deconstructed version of this scenario is a "triangle moose" model, where the top quark gets its mass from coupling to a top-Higgs field, while the gauge boson masses are generated from a Higgsless sector. The spectrum of the model includes scalar (top-Higgs) and pseudoscalar (top-pion) states. In this paper, we study the properties of these particles, discuss their production mechanisms and decay modes, and suggest how best to search for them at the LHC.

  6. A macrofossil analysis of materials recovered from Hovenweep National Monument, Cajon Mesa, Colorado and Utah

    E-Print Network [OSTI]

    Chapman, Donna Ruth

    1979-01-01T23:59:59.000Z

    baceous speci s i 1 ding ~0 ~ zo is sp. , ~sti a ccmata, Salsola sp. , E odium cic ta i m, ul bilis li ea i . ph elis c~o u ata and ~S ha al e sp. Shadscale ls adapt d t e i o ditio s b th mo pho- 1 ogically and physiologically. Sarcobatus vermiculatus... Mirabilis Oryzopsis Ph'rsalis P I flux Pc pulus Sails SphaeralCea Sclanum Pxlus tea Mays Figure S. Percentage of Species Recovered Relative to Time 35 percentage of a given sample, adding all percentages from all samples from the mesa...

  7. Sandia Energy - Mesa del Sol Unveils First Smart Grid in the Nation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementing Nonlinear757Kelley Ruehl Home KelleyMary CrawfordMesa del Sol

  8. EPJ Photovoltaics 2, 20301 (2011) www.epj-pv.org

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    2011-01-01T23:59:59.000Z

    EPJ Photovoltaics 2, 20301 (2011) www.epj-pv.org DOI: 10.1051/epjpv/2011001 c Owned by the authors, published by EDP Sciences, 2011 EPJ PhotovoltaicsEPJ Photovoltaics Geometrical optimization and electrical online: 1 April 2011 Abstract This article investigates the optimal efficiency of a photovoltaic system

  9. Utility Scale Solar PV Cost Steven SimmonsSteven Simmons

    E-Print Network [OSTI]

    Nuclear Generating Station. 4 #12;6/19/2013 3 EVEN MORE SUNNY HEADLINES New solar panels glisten6/19/2013 1 Utility Scale Solar PV Cost Steven SimmonsSteven Simmons Northwest Power Cost Forecast 5. Levelized Costs 1 SOLAR POWER SYSTEM HAS BRIGHT FUTURE 1. Modest environmental impacts

  10. Results from measurements on the PV-VENT systems

    E-Print Network [OSTI]

    effi- cient PV-ventilation in retrofit housing", contract no. JOR3-CT97-0160 and partly by the Danish Řstergaard Jensen. M.Sc., Solar Energy Centre Denmark Hossein Gohari, B.Sc., Heating Technology, Danish.Sc., Ventilation and Environment. Technological Institute of Denmark Anne Rasmussen, M.Sc., Cenergia Energy

  11. Fault Current Contribution from Single-Phase PV Inverters

    SciTech Connect (OSTI)

    Keller, J.; Kroposki, B.; Bravo, R.; Robles, S.

    2011-01-01T23:59:59.000Z

    A significant increase in photovoltaic (PV) system installations is expected to come on line in the near future and as the penetration level of PV increases, the effect of PV may no longer be considered minimal. One of the most important attributions of additional PV is what effect this may have on protection systems. Protection engineers design protection systems to safely eliminate faults from the electric power system. One of the new technologies recently introduced into the electric power system are distributed energy resources (DER). Currently, inverter-based DER contributes very little to the power balance on all but a few utility distribution systems. As DER become prevalent in the distribution system, equipment rating capability and coordination of protection systems merit a closer investigation. A collaborative research effort between the National Renewable Energy Laboratory (NREL) and Southern California Edison (SCE) involved laboratory short-circuit testing single-phase (240 VAC) residential type (between 1.5 and 7kW) inverters. This paper will reveal test results obtained from these short-circuit tests.

  12. Opportunities and Challenges for Power Electronics in PV Modules (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Deline, C.; Wohlgemuth, J.; Marion, B.; Granata, J.

    2011-02-01T23:59:59.000Z

    The presentation describes the value of adding DC converters and other power electronics to modules to improve their output even when shading or bad cells would otherwise decrease the module output. The presentation was part of a workshop sponsored by ARPA-E exploring the opportunities for power electronics to support PV applications.

  13. Silicon Oxynitride Thin Film Barriers for PV Packaging (Poster)

    SciTech Connect (OSTI)

    del Cueto, J. A.; Glick, S. H.; Terwilliger, K. M.; Jorgensen, G. J.; Pankow, J. W.; Keyes, B. M.; Gedvilas, L. M.; Pern, F. J.

    2006-10-03T23:59:59.000Z

    Dielectric, adhesion-promoting, moisture barriers comprised of silicon oxynitride thin film materials (SiOxNy with various material stoichiometric compositions x,y) were applied to: 1) bare and pre-coated soda-lime silicate glass (coated with transparent conductive oxide SnO2:F and/or aluminum), and polymer substrates (polyethylene terephthalate, PET, or polyethylene napthalate, PEN); plus 2) pre- deposited photovoltaic (PV) cells and mini-modules consisting of amorphous silicon (a-Si) and copper indium gallium diselenide (CIGS) thin-film PV technologies. We used plasma enhanced chemical vapor deposition (PECVD) process with dilute silane, nitrogen, and nitrous oxide/oxygen gas mixtures in a low-power (< or = 10 milliW per cm2) RF discharge at ~ 0.2 Torr pressure, and low substrate temperatures < or = 100(degrees)C, over deposition areas ~ 1000 cm2. Barrier properties of the resulting PV cells and coated-glass packaging structures were studied with subsequent stressing in damp-heat exposure at 85(degrees)C/85% RH. Preliminary results on PV cells and coated glass indicate the palpable benefits of the barriers in mitigating moisture intrusion and degradation of the underlying structures using SiOxNy coatings with thicknesses in the range of 100-200 nm.

  14. VALIDATION OF A SIMPLIFIED PV SIMULATION ENGINE Richard Perez

    E-Print Network [OSTI]

    Perez, Richard R.

    (BOS) parameters. The flow chart in Fig. 1 illustrates input and output flows in a program. The flow chart in Fig. 2 illustrates the modeling approach used in CPE. The calculation of PV output: this is done by estimating reflected energy, Qr(h,m), from the horizontal reference table, Qh(h,m) using

  15. Minnesota Power- Solar-Electric (PV) Rebate Program

    Broader source: Energy.gov [DOE]

    Minnesota Power offers a rebate of $1,000 per kilowatt (kW) DC for grid-connected solar-electric (PV) systems, with a maximum award of $20,000 per customer or 60% installed costs per customer. This...

  16. Ballast-mounted PV arrays: Phase 2 final report

    SciTech Connect (OSTI)

    Edward C. Kern

    2000-03-01T23:59:59.000Z

    The expansive flat rooftops of industrial and commercial buildings across America offer the largest, most secure, and potentially least-cost real estate opportunity to install massive amounts of solar photovoltaic generation in the building sector. Unfortunately, mechanical penetration of roofing membranes is very expensive and perceived by building owners and operators to increase the likelihood of leaking. In response Ascension Technology has pioneered the development of low-cost ballasted approaches for mounting PV arrays. Recently, however, we have experienced our first two instances in which strong winds have moved our arrays on rooftops and heightened our interest, and the PV industries' need, to develop zero-penetration mounting techniques that are more secure, yet remain low in cost. In this PV BONUS project, Ascension Technology and its partners addressed wind loading on solar panels and the suitability of using frictional forces between ballast trays and roofing materials to resist PV arrays sliding on rooftops. The primary goal of the project is to capture the potential cost savings made possible by ballast-mounting by showing under what conditions it can satisfy wind loading concerns. A secondary goal is to address a more geographically constrained concern regarding withstanding seismic forces.

  17. November 21, 2000 PV Lesson Plan 1 Solar Cells

    E-Print Network [OSTI]

    Oregon, University of

    November 21, 2000 PV Lesson Plan 1 ­ Solar Cells Prepared for the Oregon Million Solar Roofs Coalition By Frank Vignola ­ University of Oregon Solar Radiation Monitoring Lab John Hocken ­ South Eugene High School Gary Grace ­ South Eugene High School In Schools #12;1 Solar Cells Lesson Plan Content

  18. November 21, 2000 PV Lesson Plan 2 Solar Electric Arrays

    E-Print Network [OSTI]

    Oregon, University of

    rating of a photovoltaic module is typically quoted as the power output of the module when the incidentNovember 21, 2000 PV Lesson Plan 2 ­ Solar Electric Arrays Prepared for the Oregon Million Solar Roofs Coalition By Frank Vignola ­ University of Oregon Solar Radiation Monitoring Lab John Hocken

  19. Top quark mass measurements

    SciTech Connect (OSTI)

    L. Cerrito

    2004-07-16T23:59:59.000Z

    Preliminary results on the measurement of the top quark mass at the Tevatron Collider are presented. In the dilepton decay channel, the CDF Collaboration measures m{sub t} = 175.0{sub -16.9}{sup +17.4}(stat.){+-}8.4(syst.) GeV/c{sup 2}, using a sample of {approx} 126 pb{sup -1} of proton-antiproton collision data at {radical}s = 1.96 TeV (Run II). In the lepton plus jets channel, the CDF Collaboration measures 177.5{sub -9.4}{sup +12.7}(stat.) {+-} 7.1(syst.) GeV/c{sup 2}, using a sample of {approx} 102 pb{sup -1} at {radical}s = 1.96 TeV. The D0 Collaboration has newly applied a likelihood technique to improve the analysis of {approx} 125 pb{sup -1} of proton-antiproton collisions at {radical}s = 1.8 TeV (Run I), with the result: m{sub t} = 180.1 {+-} 3.6(stat.) {+-}3.9(syst.) GeV/c{sup 2}. The latter is combined with all the measurements based on the data collected in Run I to yield the most recent and comprehensive experimental determination of the top quark mass: m{sub t} = 178.0 {+-} 2.7(stat.) {+-} 3.3(syst.) GeV/c{sup 2}.

  20. Top-antitop and Top-top Resonances in the Dilepton Channel at the CERN LHC

    E-Print Network [OSTI]

    Yang Bai; Zhenyu Han

    2009-04-12T23:59:59.000Z

    We perform a model-independent study for top-antitop and top-top resonances in the dilepton channel at the Large Hadtron Collider. In this channel, we can solve the kinematic system to obtain the momenta of all particles including the two neutrinos, and hence the resonance mass and spin. For discovering top-antitop resonances, the dilepton channel is competitive to the semileptonic channel because of the good resolution of lepton momentum measurement and small standard model backgrounds. Moreover, the charges of the two leptons can be identified, which makes the dilepton channel advantageous for discovering top-top resonances and for distinguishing resonance spins. We discuss and provide resolutions for difficulties associated with heavy resonances and highly boosted top quarks.

  1. Materials Technologies: Goals, Strategies, and Top Accomplishments...

    Energy Savers [EERE]

    Materials Technologies: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP) Materials Technologies: Goals, Strategies, and Top Accomplishments...

  2. Rooftop PV system. PV:BONUS Phase 3B, final technical report

    SciTech Connect (OSTI)

    NONE

    1998-11-01T23:59:59.000Z

    Under the PV:BONUS Program, ECD and United Solar developed, demonstrated and commercialized two new lightweight, flexible BIPV modules specifically designed as replacements for conventional asphalt shingles and standing seam metal roofing. These modules can be economically and aesthetically integrated into new residential and commercial buildings, and can be used to address the even larger roofing-replacement market. An important design feature of these modules, which minimizes the installation and balance-of-system costs, is their ability to be installed by conventional roofing contractors without special training. The modules are fabricated from high-efficiency, triple-junction spectrum-splitting a-Si alloy solar cells developed by ECD and United Solar. These cells are produced on thin, flexible stainless steel substrates and encapsulated with polymer materials. The Phase 3 program began in August 1995. The principal tasks and goals of this program, which have all been successfully completed by ECD and United Solar, are described in the body and appendices of this report.

  3. Solar PV Manufacturing Cost Model Group: Installed Solar PV System Prices (Presentation)

    SciTech Connect (OSTI)

    Goodrich, A. C.; Woodhouse, M.; James, T.

    2011-02-01T23:59:59.000Z

    EERE's Solar Energy Technologies Program is charged with leading the Secretary's SunShot Initiative to reduce the cost of electricity from solar by 75% to be cost competitive with conventional energy sources without subsidy by the end of the decade. As part of this Initiative, the program has funded the National Renewable Energy Laboratory (NREL) to develop module manufacturing and solar PV system installation cost models to ensure that the program's cost reduction targets are carefully aligned with current and near term industry costs. The NREL cost analysis team has leveraged the laboratories' extensive experience in the areas of project finance and deployment, as well as industry partnerships, to develop cost models that mirror the project cost analysis tools used by project managers at leading U.S. installers. The cost models are constructed through a "bottoms-up" assessment of each major cost element, beginning with the system's bill of materials, labor requirements (type and hours) by component, site-specific charges, and soft costs. In addition to the relevant engineering, procurement, and construction costs, the models also consider all relevant costs to an installer, including labor burdens and overhead rates, supply chain costs, and overhead and materials inventory costs, and assume market-specific profits.

  4. Integrating High Penetrations of PV into Southern California: Year 2 Project Update; Preprint

    SciTech Connect (OSTI)

    Mather, B.; Neal, R.

    2012-08-01T23:59:59.000Z

    Southern California Edison (SCE) is well into a five-year project to install a total of 500 MW of distributed photovoltaic (PV) energy within its utility service territory. Typical installations to date are 1-3 MW peak rooftop PV systems that interconnect to medium-voltage urban distribution circuits or larger (5 MW peak) ground-mounted systems that connect to medium-voltage rural distribution circuits. Some of the PV system interconnections have resulted in distribution circuits that have a significant amount of PV generation compared to customer load, resulting in high-penetration PV integration scenarios. The National Renewable Energy Laboratory (NREL) and SCE have assembled a team of distribution modeling, resource assessment, and PV inverter technology experts in order to investigate a few of the high-penetration PV distribution circuits. Currently, the distribution circuits being studied include an urban circuit with a PV penetration of approximately 46% and a rural circuit with a PV penetration of approximately 60%. In both cases, power flow on the circuit reverses direction, compared to traditional circuit operation, during periods of high PV power production and low circuit loading. Research efforts during year two of the five-year project were focused on modeling the distribution system level impacts of high-penetration PV integrations, the development and installation of distribution circuit data acquisition equipment appropriate for quantifying the impacts of high-penetration PV integrations, and investigating high-penetration PV impact mitigation strategies. This paper outlines these research efforts and discusses the following activities in more detail: the development of a quasi-static time-series test feeder for evaluating high-penetration PV integration modeling tools; the advanced inverter functions being investigated for deployment in the project's field demonstration and a power hardware-in-loop test of a 500-kW PV inverter implementing a limited set of advanced inverter functions.

  5. Top physics results from CDF

    SciTech Connect (OSTI)

    Gomez, Gervasio; /Cantabria Inst. of Phys.

    2005-05-01T23:59:59.000Z

    The top quark is by far the most massive fundamental particle observed so far, and the study of its properties is interesting for several reasons ranging from its possible special role in electroweak symmetry breaking to its sensitivity to physics beyond the Standard Model. They present recent top physics results from CDF based on 160-320 pb{sup -1} of p{bar p} collision data at {radical}s = 1.96 TeV. The t{bar t} cross section and the top mass have been measured in different decay channels and using different methods. they have searched for evidence of single top production, setting upper limits on its production rate. Other results shown in this conference include studies of the polarization of W bosons from top decays, a search for charged Higgs decaying from top, and a search for additional heavy t' quarks.

  6. Solar Photovoltaic Economic Development: Building and Growing a Local PV Industry, August 2011 (Book)

    SciTech Connect (OSTI)

    Not Available

    2011-08-01T23:59:59.000Z

    The U.S. photovoltaic (PV) industry is forecast to grow, and it represents an opportunity for economic development and job creation in communities throughout the United States. This report helps U.S. cities evaluate economic opportunities in the PV industry. It serves as a guide for local economic development offices in evaluating their community?s competitiveness in the solar PV industry, assessing the viability of solar PV development goals, and developing strategies for recruiting and retaining PV companies to their areas.

  7. Sensitivity of Rooftop PV Projections in the SunShot Vision Study to Market Assumptions

    SciTech Connect (OSTI)

    Drury, E.; Denholm, P.; Margolis, R.

    2013-01-01T23:59:59.000Z

    The SunShot Vision Study explored the potential growth of solar markets if solar prices decreased by about 75% from 2010 to 2020. The SolarDS model was used to simulate rooftop PV demand for this study, based on several PV market assumptions--future electricity rates, customer access to financing, and others--in addition to the SunShot PV price projections. This paper finds that modeled PV demand is highly sensitive to several non-price market assumptions, particularly PV financing parameters.

  8. Testing eccentricity pumping mechanisms to model eccentric long period sdB binaries with MESA

    E-Print Network [OSTI]

    Vos, Joris; Marchant, Pablo; Van Winckel, Hans

    2015-01-01T23:59:59.000Z

    Hot subdwarf-B stars in long-period binaries are found to be on eccentric orbits, even though current binary-evolution theory predicts those objects to be circularised before the onset of Roche-lobe overflow (RLOF). We aim to find binary-evolution mechanisms that can explain these eccentric long-period orbits, and reproduce the currently observed period-eccentricity diagram. Three different processes are considered; tidally-enhanced wind mass-loss, phase-dependent RLOF on eccentric orbits and the interaction between a circumbinary disk and the binary. The binary module of the stellar-evolution code MESA (Modules for Experiments in Stellar Astrophysics) is extended to include the eccentricity-pumping processes. The effects of different input parameters on the final period and eccentricity of a binary-evolution model are tested with MESA. The end products of models with only tidally-enhanced wind mass-loss can indeed be eccentric, but these models need to lose too much mass, and invariably end up with a helium ...

  9. Tops and Writhing DNA

    E-Print Network [OSTI]

    Joseph Samuel; Supurna Sinha

    2010-11-30T23:59:59.000Z

    The torsional elasticity of semiflexible polymers like DNA is of biological significance. A mathematical treatment of this problem was begun by Fuller using the relation between link, twist and writhe, but progress has been hindered by the non-local nature of the writhe. This stands in the way of an analytic statistical mechanical treatment, which takes into account thermal fluctuations, in computing the partition function. In this paper we use the well known analogy with the dynamics of tops to show that when subjected to stretch and twist, the polymer configurations which dominate the partition function admit a local writhe formulation in the spirit of Fuller and thus provide an underlying justification for the use of Fuller's "local writhe expression" which leads to considerable mathematical simplification in solving theoretical models of DNA and elucidating their predictions. Our result facilitates comparison of the theoretical models with single molecule micromanipulation experiments and computer simulations.

  10. Boosted top: experimental tools overview

    E-Print Network [OSTI]

    Emanuele Usai; for the ATLAS; CMS Collaborations

    2015-01-05T23:59:59.000Z

    An overview of tools and methods for the reconstruction of high-boost top quark decays at the LHC is given in this report. The focus is on hadronic decays, in particular an overview of the current status of top quark taggers in physics analyses is presented. The most widely used jet substructure techniques, normally used in combination with top quark taggers, are reviewed. Special techniques to treat pileup in large cone jets are described, along with a comparison of the performance of several boosted top quark reconstruction techniques.

  11. Keynote: Some remarks on top

    E-Print Network [OSTI]

    Werner Bernreuther

    2010-08-23T23:59:59.000Z

    A few key issues of present and future explorations of the physics of top quarks at the Tevatron and LHC are discussed.

  12. Geology, hydrothermal petrology, stable isotope geochemistry, and fluid inclusion geothermometry of LASL geothermal test well C/T-1 (Mesa 31-1), East Mesa, Imperial Valley, California, USA

    SciTech Connect (OSTI)

    Miller, K.R.; Elders, W.A.

    1980-08-01T23:59:59.000Z

    Borehole Mesa 31-1 (LASL C/T-1) is an 1899-m (6231-ft) deep well located in the northwestern part of the East Mesa Geothermal Field. Mesa 31-1 is the first Calibration/Test Well (C/T-1) in the Los Alamos Scientific Laboratory (LASL), Geothermal Log Interpretation Program. The purpose of this study is to provide a compilation of drillhole data, drill cuttings, well lithology, and formation petrology that will serve to support the use of well LASL C/T-1 as a calibration/test well for geothermal logging. In addition, reviews of fluid chemistry, stable isotope studies, isotopic and fluid inclusion geothermometry, and the temperature log data are presented. This study provides the basic data on the geology and hydrothermal alteration of the rocks in LASL C/T-1 as background for the interpretation of wireline logs.

  13. J. Adv. Model. Earth Syst., Vol. 2, Art. #8, 19 pp. Adiabatic Rearrangement of Hollow PV Towers

    E-Print Network [OSTI]

    Schubert, Wayne H.

    J. Adv. Model. Earth Syst., Vol. 2, Art. #8, 19 pp. Adiabatic Rearrangement of Hollow PV Towers potential vorticity (PV). is structure has been referred to as a hollow PV tower. e sign reversal of the radial gradient of PV satis es the Charney-Stern necessary condition for combined barotropic

  14. A PV Dynamics for Rotating Shallow Water on the Sphere search for a balance dynamics on the full sphere

    E-Print Network [OSTI]

    Muraki, David J.

    A PV Dynamics for Rotating Shallow Water on the Sphere search for a balance dynamics on the full vorticity (PV) geometric obstacle: local Rossby number singular at Equator, 1 #12;rSW on the Full Sphere r2 gH0 !-1/2 1 Balanced Dynamics PV Inversion on a Hemisphere, McIntyre/Norton 1999 landmark for PV

  15. Within the free troposphere, PV is conserved by frictionless, adiabatic motion. However, friction and diabatic processes in the

    E-Print Network [OSTI]

    Plant, Robert

    Within the free troposphere, PV is conserved by frictionless, adiabatic motion. However, friction and diabatic processes in the boundary layer can create or destroy PV. PV is generated in the warm PV anomaly above the low centre, confined in the vertical but spread in the horizontal. This shape

  16. ON THE PURE VIRTUAL BRAID GROUP PV3 V. G.BARDAKOV, R. MIKHAILOV, V. V. VERSHININ, AND J. WU

    E-Print Network [OSTI]

    Wu, Jie

    ON THE PURE VIRTUAL BRAID GROUP PV3 V. G.BARDAKOV, R. MIKHAILOV, V. V. VERSHININ, AND J. WU Abstract. We investigate various properties of the pure virtual braid group PV3. Out of its presentation, we get a free product decomposition of PV3. As a consequence, we show that PV3 is residually torsion

  17. 114 home power 138 august & september 2010 In the course of helping the PV industry with NEC issues and

    E-Print Network [OSTI]

    Johnson, Eric E.

    where a utility-interactive PV system connection could backfeed this GFPD breaker? The answer-interactive PV situation. When a ground-fault trips a GFPD breaker that is being backfed by a PV inverter, both114 home power 138 · august & september 2010 In the course of helping the PV industry with NEC

  18. 68 IAEI NEWS January.February 2010 www.iaei.org supply-side pv utility connections

    E-Print Network [OSTI]

    Johnson, Eric E.

    of a utility-interactive PV inverter to the supply-side of a service disconnect is essentially connecting be sized at 125% of the rat- ed output current from the PV inverter(s). But in small systems, a question68 IAEI NEWS January.February 2010 www.iaei.org supply-side pv utility connections Supply-Side PV

  19. Monitoring and analysis of two grid connected PV systems Michael BRESSAN* Valrie DUPE**, Bruno JAMMES**, Thierry TALBERT*, Corinne ALONSO**

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    . Adapted to all kinds of equipment, it can be installed on any inverter or PV array. This monitoring system l building ha u" (1 inverte mum power ur rideau" a monitoring (latitude 43 V technolog PV array. A microco meter can m PV inverte re 1: Monitor grid con el systems study PV s a non linear everal pape

  20. Quantify Degradation Rates and Mechanisms of PV Modules and Systems Installed in Florida Through Comprehensive Experimental and Theoretical Analysis (Poster)

    SciTech Connect (OSTI)

    Sorloaica-Hickman, N.; Davis, K.; Kurtz, S.; Jordan, D.

    2011-02-01T23:59:59.000Z

    The economic viability of photovoltaic (PV) technologies is inextricably tied to both the electrical performance and degradation rate of the PV systems, which are the generators of electrical power in PV systems. Over the past 15 years, performance data have been collected on numerous PV systems installed throughout the state of Florida and will be presented.

  1. Thoughts Regarding the Dimensions of Faults at Rainier and Aqueduct Mesas, Nye County, Nevada, Based on Surface and Underground Mapping

    SciTech Connect (OSTI)

    Drellack, S.L.; Prothro, L.B.; Townsend, M.J.; Townsend, D.R.

    2011-02-01T23:59:59.000Z

    The geologic setting and history, along with observations through 50 years of detailed geologic field work, show that large-displacement (i.e., greater than 30 meters of displacement) syn- to post-volcanic faults are rare in the Rainier Mesa area. Faults observed in tunnels and drill holes are mostly tight, with small displacements (most less than 1.5 meters) and small associated damage zones. Faults are much more abundant in the zeolitized tuffs than in the overlying vitric tuffs, and there is little evidence that faults extend downward from the tuff section through the argillic paleocolluvium into pre-Tertiary rocks. The differences in geomechanical characteristics of the various tuff lithologies at Rainier Mesa suggest that most faults on Rainer Mesa are limited to the zeolitic units sandwiched between the overlying vitric bedded tuffs and the underlying pre-Tertiary units (lower carbonate aquifer–3, lower clastic confining unit–1, and Mesozoic granite confining unit).

  2. PG&E Plans for 500 MW of PV

    Broader source: Energy.gov [DOE]

    PG&E has developed a plan to install 500 MW of PV by the year 2015. The plan calls for 250 MW to be acquired through Power Purchase Agreements (PPA) and the other 250 MW to be purchased and owned by the utility. PG&E presented the plan at a public forum on April 27, 2009. A copy of the power point presentation is attached.

  3. Sandia/EPRI PV Symposium - Save the Date!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementingnpitcheResearch Briefs The annuallyNationalseeksSandia/EPRI PV

  4. www.iaei.org May.June 2006 IAEI NEWS 85 THE 15-MINUTE PV SYSTEM INSPECTION

    E-Print Network [OSTI]

    Johnson, Eric E.

    www.iaei.org May.June 2006 IAEI NEWS 85 THE 15-MINUTE PV SYSTEM INSPECTION by John Wiles The 15-minuteThe 15-minute PV System InspectionPV System Inspection CaCan You? Should You?n You? Should You? The 15-minuteThe 15-minute PV System InspectionPV System Inspection CaCan You? Should You?n You? Should

  5. Top Quark Properties from Top Pair Events and Decays

    E-Print Network [OSTI]

    Andrew G. Ivanov; for the CDF; Dzero Collaborations

    2008-10-19T23:59:59.000Z

    Over a decade since the discovery of the top quark we are still trying to unravel mysteries of the heaviest observed particle and learn more about its nature. The continuously accumulating statistics of CDF and Dzero data provide the means for measuring top quark properties with ever greater precision and the opportunity to search for signs of new physics that could be manifested through subtle deviations from the standard model in the production and decays of top quarks. In the following we present a slice of the rich program in top quark physics at the Fermilab Tevatron: measurements of the properties of top quark decays and searches for unusual phenomena in events with pair produced tops. In particular, we discuss the most recent and precise CDF and Dzero measurements of the transverse polarization of W bosons from top decays, branching ratios and searches for flavor-changing neutral current decays, decays into charged Higgs and invisible decays. These analyses correspond to integrated luminosities ranging from 0.9 to 2.7 inv. fb.

  6. Exploring the Economic Value of EPAct 2005's PV Tax Credits

    SciTech Connect (OSTI)

    Bolinger, Mark A; Wiser, Ryan; Ing, Edwin

    2009-08-01T23:59:59.000Z

    This CESA - LBNL Case Study examines how much economic value do new and expanded federal tax credits really provide to PV system purchasers, and what implications might they hold for state/utility PV grant programs. The report begins with a discussion of the taxability of PV grants and their interaction with federal credits, as this issue significantly affects the analysis that follows. We then calculate the incremental value of EPAct's new and expanded credits for PV systems of different sizes, and owned by different types of entities. The report concludes with a discussion of potential implications for purchasers of PV systems, as well as for administrators of state/utility PV programs. The market for grid-connected photovoltaics (PV) in the US has grown dramatically in recent years, driven in large part by PV grant or 'buy-down' programs in California, New Jersey, and many other states. The recent announcement of a new 11-year, $3.2 billion PV program in California suggests that state policy will continue to drive even faster growth over the next decade. Federal policy has also played a role, primarily by providing commercial PV systems access to tax benefits, including accelerated depreciation (5-year MACRS schedule) and a business energy investment tax credit (ITC). Since the signing of the Energy Policy Act of 2005 (EPAct) on August 8, the federal government has begun to play a much more significant role in supporting both commercial and residential PV systems. Specifically, EPAct increased the federal ITC for commercial PV systems from 10% to 30% of system costs, and also created a new 30% ITC (capped at $2000) for residential solar systems. Both changes went into effect on January 1, 2006, for an initial period of two years, and in late 2006 were extended for an additional year. Unless extended further, the new residential ITC will expire, and the 30% commercial ITC will revert back to 10%, on January 1, 2009. How much economic value do these new and expanded federal tax credits really provide to PV system purchasers? And what implications might they hold for state/utility PV grant programs? Using a generic (i.e., non-state-specific) cash flow model, this report explores these questions.1 We begin with a discussion of the taxability of PV grants and their interaction with federal credits, as this issue significantly affects the analysis that follows. We then calculate the incremental value of EPAct's new and expanded credits for PV systems of different sizes, and owned by different types of entities. We conclude with a discussion of potential implications for purchasers of PV systems, as well as for administrators of state/utility PV programs.

  7. Measurement uncertainty analysis techniques applied to PV performance measurements

    SciTech Connect (OSTI)

    Wells, C.

    1992-10-01T23:59:59.000Z

    The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment's final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

  8. Performance of a multifunctional PV/T hybrid solar window

    SciTech Connect (OSTI)

    Davidsson, Henrik; Perers, Bengt; Karlsson, Bjoern [Energy and Building Design, Lund University, P.O. Box 118, SE 221 00 Lund (Sweden)

    2010-03-15T23:59:59.000Z

    A building-integrated multifunctional PV/T solar window has been developed and evaluated. It is constructed of PV cells laminated on solar absorbers placed in a window behind the glazing. To reduce the cost of the solar electricity, tiltable reflectors have been introduced in the construction to focus radiation onto the solar cells. The reflectors render the possibility of controlling the amount of radiation transmitted into the building. The insulated reflectors also reduce the thermal losses through the window. A model for simulation of the electric and hot water production was developed. The model can perform yearly energy simulations where different features such as shading of the cells or effects of the glazing can be included or excluded. The simulation can be run with the reflectors in an active, up right, position or in a passive, horizontal, position. The simulation program was calibrated against measurements on a prototype solar window placed in Lund in the south of Sweden and against a solar window built into a single family house, Solgaarden, in Aelvkarleoe in the central part of Sweden. The results from the simulation shows that the solar window annually produces about 35% more electric energy per unit cell area compared to a vertical flat PV module. (author)

  9. Rooftop PV system. Final technical progress report, Phase II

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    Under this four-year PV:BONUS Program, ECD and United Solar are developing and demonstrating two new lightweight flexible building integrated Photovoltaic (BIPV) modules specifically designed as exact replacements for conventional asphalt shingles and standing seam metal roofing. These modules can be economically and aesthetically integrated into new residential and commercial buildings, and address the even larger roofing replacement market. The modules are designed to be installed by roofing contractors without special training which minimizes the installation and balance of system costs. The modules will be fabricated from high-efficiency, multiple-junction a-Si alloy solar cells developed by ECD and United Solar. Under the Phase I Program, which ended in March 1994, we developed two different concept designs for rooftop PV modules: (1) the United Solar overlapping (asphalt shingle replacement) shingle-type modules and (2) the ECD metal roof-type modules. We also developed a plan for fabricating, testing and demonstrating these modules. Candidate demonstration sites for our rooftop PV modules were identified and preliminary engineering designs for these demonstrations were developed; a marketing study plan was also developed. The major objectives of the Phase II Program, which started in June 1994 was (1) to develop, test, and qualify these new rooftop modules; (2) to develop mechanical and electrical engineering specifications for the demonstration projects; and (3) to develop a marketing/commercialization plan.

  10. Stochastic PV performance/reliability model : preview of alpha version.

    SciTech Connect (OSTI)

    Stein, Joshua S.; Miller, Steven P.

    2010-03-01T23:59:59.000Z

    Problem Statement: (1) Uncertainties in PV system performance and reliability impact business decisions - Project cost and financing estimates, Pricing service contracts and guarantees, Developing deployment and O&M strategies; (2) Understanding and reducing these uncertainties will help make the PV industry more competitive (3) Performance has typically been estimated without much attention to reliability of components; and (4) Tools are needed to assess all inputs to the value proposition (e.g., LCOE, cash flow, reputation, etc.). Goals and objectives are: (1) Develop a stochastic simulation model (in GoldSim) that can represent PV system performance as a function of system design, weather, reliability, and O&M policies; (2) Evaluate performance for an example system to quantify sources of uncertainty and identify dominant parameters via a sensitivity study; and (3) Example System - 1 inverter, 225 kW DC Array latitude tilt (90 strings of 12 modules {l_brace}1080 modules{r_brace}), Weather from Tucumcari, NM (TMY2 with annual uncertainty).

  11. Top production at the LHC

    E-Print Network [OSTI]

    Kanzaki, Junichi; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    Measurements of the inclusive top quark production cross sections in proton-proton collisions with the ATLAS and CMS detectors at the Large Hadron Collider are presented. The measurements of the precise pair production cross section are performed for di-lepton, semi-leptonic and hadronic final states. Differential measurements of the top transverse momentum and kinematic properties of the top-anti-top pair are also discussed. The results, unfolded to particle and parton level, are compared to recent Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers and NLO QCD calculations. For single top-quark productions cross sections are measured for t-channel, s-channel and W-boson associated production processes. The single top-quark and anti-top total production cross sections, their ratio, as well as a measurement of the inclusive production cross section is presented. All measurements are compared to theoretical calculations and the CKM matrix element |Vtb| is determined.

  12. Properties of the top quark

    E-Print Network [OSTI]

    A. W. Jung

    2014-10-14T23:59:59.000Z

    Recent measurements of top-quark properties at the LHC and the Tevatron are presented. Most recent measurements of the top quark mass have been carried out by CMS using $19.7/$fb of $\\sqrt{s} = 8$ TeV data including the study of the dependence on event kinematics. ATLAS uses the full Run I data at $\\sqrt{s} = 7$ TeV for a "3D" measurement that significantly reduces systematic uncertainties. D0 employs the full Run II data using the matrix element method to measure the top quark mass with significantly reduced systematic uncertainties. Many different measurements of the top quark exist to date and the most precise ones per decay channel per experiment have been combined into the first world combination with a relative precision of 0.44%. Latest updates of measurements of production asymmetries include the measurement of the \\ttbar production asymmetry by D0 employing the full Run II data set, by CMS and ATLAS (including the polarization of the top quark) employing both the full data set at $\\sqrt{s} = 7$ TeV. CMS uses the full $\\sqrt{s} = 8$ TeV data to measure the top quark polarization in single top production, the ratio ${\\cal R}$ of the branching fractions ${\\cal B}(t \\rightarrow Wb) / {\\cal B}(t \\rightarrow Wq)$ and to search for flavor changing neutral currents. The results from all these measurements agree well with their respective Standard Model expectation.

  13. Googling the Top Two: Information Search in California’s Top Two Primary

    E-Print Network [OSTI]

    Sinclair, Betsy; Wray, Michael

    2015-01-01T23:59:59.000Z

    more as a consequence of the top two primary. ReferencesAssessing California’s Top-Two Primary and RedistrictingGoogling the Top Two: Information Search in California’s Top

  14. The costs of solar photovoltaic (PV) panels and system

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesis of 2DandEnergy The Year on Energy.gov:

  15. Photovoltaics (PV) as an Eligible Measure in Residential PACE Programs: Benefits and Challenges (Fact Sheet)

    SciTech Connect (OSTI)

    Coughlin, J.

    2010-06-01T23:59:59.000Z

    Property Assessed Clean Energy (PACE) financing is one of several new financial models broadening access to clean energy by addressing the barrier of initial capital cost. The majority of the PACE programs in the market today include PV as an eligible measure. PV appeals to homeowners as a way to reduce utility bills, self-generate sustainable power, increase energy independence and demonstrate a commitment to the environment. If substantial state incentives for PV exist, PV projects can be economic under PACE, especially when partnered with good net metering policies. At the same time, PV is expensive relative to other eligible measures with a return on investment horizon that might exceed program targets. This fact sheet reviews the benefits and potential challenges of including PV in PACE programs.

  16. Protein Identification Using Top-Down. | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Identification Using Top-Down. Protein Identification Using Top-Down. Abstract: In the last two years, due to advances in protein separation and mass spectrometry, top-down mass...

  17. The Top Two Runoff – An Assessment

    E-Print Network [OSTI]

    Quinn, Tony

    2015-01-01T23:59:59.000Z

    The Top Two Runoff – An Assessment Tony Quinn The mosts new open primary and Top Two general election is that allvery real impact of the new Top Two runoff – legislators who

  18. The Top Two: Too Soon to Tell

    E-Print Network [OSTI]

    Valentine, Zabrae

    2015-01-01T23:59:59.000Z

    The Top Two: Too Soon to Tell Zabrae Valentine Until just aRedistricting Commission, no Top Two, no loosening of thefirm conclusions until the Top Two has had time to take

  19. Top quark physics expectations at the LHC

    E-Print Network [OSTI]

    Gaponenko, Andrei; ATLAS Collaboration; CMS Collaboration

    2008-01-01T23:59:59.000Z

    Physics Analysis Summary TOP 08 005. ATLAS Collaboration,Note 2006/013. E. W. Varnes, Top Physics plenary talk, thismass in the ATLAS cuts based top mass analysis with 1fb ?1

  20. Introduction: The California Top Two Primary

    E-Print Network [OSTI]

    Sinclair, Betsy

    2015-01-01T23:59:59.000Z

    with the adoption of the top two primary, and we lookIntroduction: The California Top Two Primary Betsy Sinclairfrequently asserted that the “top-two” would produce more