Powered by Deep Web Technologies
Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

General Counsel Legal Interpretation Regarding Medical Removal Protection Benefits Pursuant to 10 CFR Part 850, Chronic Beryllium Disease Prevention Program  

Energy.gov (U.S. Department of Energy (DOE))

The following document is the Office of the General Counsel (GC) interpretation regarding Medical Removal Protection Benefits Pursuant to 10 CFR Part 850, Chronic Beryllium Disease Prevention Program.

2

Removable pellicle for lithographic mask protection and handling  

DOE Patents (OSTI)

A removable pellicle for a lithographic mask that provides active and robust particle protection, and which utilizes a traditional pellicle and two deployments of thermophoretic protection to keep particles off the mask. The removable pellicle is removably attached via a retaining structure to the mask substrate by magnetic attraction with either contacting or non-contacting magnetic capture mechanisms. The pellicle retaining structural is composed of an anchor piece secured to the mask substrate and a frame member containing a pellicle. The anchor piece and the frame member are in removable contact or non-contact by the magnetic capture or latching mechanism. In one embodiment, the frame member is retained in a floating (non-contact) relation to the anchor piece by magnetic levitation. The frame member and the anchor piece are provided with thermophoretic fins which are interdigitated to prevent particles from reaching the patterned area of the mask. Also, the anchor piece and mask are maintained at a higher temperature than the frame member and pellicle which also prevents particles from reaching the patterned mask area by thermophoresis. The pellicle can be positioned over the mask to provide particle protection during mask handling, inspection, and pumpdown, but which can be removed manually or robotically for lithographic use of the mask.

Klebanoff, Leonard E. (Dublin, CA); Rader, Daniel J. (Albuquerque, NM); Hector, Scott D. (Oakland, CA); Nguyen, Khanh B. (Sunnyvale, CA); Stulen, Richard H. (Livermore, CA)

2002-01-01T23:59:59.000Z

3

VA Medical Device Protection Program (MDPP)  

Science Conference Proceedings (OSTI)

... Photo Source: Idaho Department of Commerce ... in patient healthcare for diagnosis, treatment, or monitoring; ... medical system: Any group of devices ...

2011-05-11T23:59:59.000Z

4

VA Medical Device Protection Program Information Security ...  

Science Conference Proceedings (OSTI)

... Photo Source: Idaho Department of Commerce 3 ... in patient healthcare for diagnosis, treatment or monitoring; ... medical system: Any group of devices ...

2011-03-10T23:59:59.000Z

5

Radiation protection for medical and allied health personnel  

SciTech Connect

With the ever-increasing use of x rays and radioactive materials, more and more persons may be exposed to ionizing radiations in the course of their work. The professional status of these individuals ranges from the highly-trained radiation specialist to the casual interdepartmental messenger. Many of these people have very little information about the possible biological effects of radiation or about the amounts which may be significant. Their attitudes toward possible exposure vary from indifference to almost pathological fear. Frequently they have questions about radiation and radiation protection practices but are reluctant or unable to seek out those who could provide answers. Their concern and interest, however, should not be ignored. This report seeks to meet their needs.

1976-01-01T23:59:59.000Z

6

HISTORY of the UMH Medical Library The medical library of Cedars Medical Center was initially housed in a remove and relatively  

E-Print Network (OSTI)

HISTORY of the UMH Medical Library 1 The medical library of Cedars Medical Center was initially subscriptions were purchased through dues of the Medical Staff. Selections of material were based and Journals for the Small Medical Library. Requests from medical staff members were incorporated

Shyu, Mei-Ling

7

Ice Slurry Medical Protective Organ Cooling: Buying Surgeons and Emergency Responders More Time  

NLE Websites -- All DOE Office Websites (Extended Search)

Slurry Medical Protective Organ Cooling: Slurry Medical Protective Organ Cooling: Buying Surgeons and Emergency Responders More Time Prepared by Ken Kasza* (PhD) and Yue Wu* (PhD) *Argonne National Laboratory 10-9-09 yuewu@anl.gov; 630-252-7203 Surgical procedures are pushing the limits of technical excision and becoming less invasive through the development and use of laparoscopic procedures assisted by surgeon/machine robotic manipulations. There is an unmet need to protect critical organs and various tissue masses during the course of surgical manipulations. Multiple tissue sites and organ systems that require complex operative manipulations to cure disease are often exposed to ischemic, traumatic, and xenobiotic insults that can result in loss of function or life-threatening conditions. Ice slurry production and delivery equipment developed by

8

Protection of Wild Adult Steelhead in Idaho by Adipose Fin Removal: 1985-1988 Final Report.  

DOE Green Energy (OSTI)

Steelhead trout reared in Idaho hatcheries for release during the 1984--1988 outmigrations were adipose fin clipped to differentiate between wild/natural and hatchery-reared fish. From 1984--1988, 34 million hatchery-reared steelhead trout were clipped and 30.1 million were released; the difference being made up by hatchery mortality and the percent of acceptable clips. Since 1987, the adipose clip has given protection to all wild/natural steelhead and identified them from hatchery stocks. 135 refs.

Duke, Rodney C.

1989-04-01T23:59:59.000Z

9

Medical  

E-Print Network (OSTI)

he Australian medical education system is at a critical juncture in relation to what and how it delivers for Aboriginal and Torres Strait Islander health. The recent work of three key organisations concerned with medical education provides a toolkit for implementation of sustainable reform within medical schools.

Tamara Mackean; Romlie Mokak; Allan Carmichael; Gregory L Phillips; David Prideaux; Theanne R Walters

2007-01-01T23:59:59.000Z

10

Water Efficiency Improvements at Various Environmental Protection Agency Sites: Best Management Practice Case Study #12 - Laboratory/Medical Equipment (Brochure)  

Science Conference Proceedings (OSTI)

The U.S. Environmental Protection Agency (EPA) built a successful water conservation program and reduced potable water use through a series of initiatives at EPA laboratories. The projects highlighted in this case study demonstrate EPA's ability to reduce water use in laboratory and medical equipment by implementing vacuum pump and steam sterilizer replacements and retrofits. Due to the success of the initial vacuum pump and steam sterilizer projects described here, EPA is implementing similar projects at several laboratories throughout the nation.

Blakley, H.

2011-03-01T23:59:59.000Z

11

Radiation protection for medical and allied health personnel-approved 1976  

SciTech Connect

With the ever-increasing use of x rays and radioactive materials, more and more persons may be exposed to ionizing radiations in the course of their work. The professional status of these individuals ranges from the highly-trained radiation specialist to the casual interdepartmental messenger. Many of these people have very little information about the possible biological effects of radiation or about the amounts which may be significant. Their attitudes toward possible exposure vary from indifference to almost pathological fear. Frequently they have questions about radiation and radiation protection practices but are reluctant or unable to seek out those who could provide answers. Their concern and interest, however, should not be ignored. This report seeks to meet their needs.

1977-01-01T23:59:59.000Z

12

Quick-release medical tape  

E-Print Network (OSTI)

Medical tape that provides secure fixation of life-sustaining and -monitoring devices with quick, easy, damage-free removal represents a longstanding unmet medical need in neonatal care. During removal of current medical ...

Laulicht, Bryan E.

13

TITLE: Disclosures of Protected Health Information Required by Law Columbia University Medical Center will use, disclose, or release a patient's protected health  

E-Print Network (OSTI)

and Assignments Team of the Office of Counterintelligence at 505-665-1572. I certify that the above information of Energy plans, policies, reports, studies, financial plans, internal data protected by the Privacy Act

Champagne, Frances A.

14

Water Efficiency Improvements At Various Environmental Protection Agency Sites: Best Management Practices Case Study #12 „ Laboratory/Medical Equipment (Brochure), Federal Energy Management Program (FEMP)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Protection Agency (EPA) built a Environmental Protection Agency (EPA) built a successful water conservation program and reduced potable water use through a series of initiatives at EPA laboratories. EPA completed projects in all of the U.S. Department of Energy (DOE) Federal Energy Management Program's (FEMP) 14 Best Management Practice (BMP) categories. The projects highlighted below demonstrate EPA's ability to reduce water use in the laboratory/medical equipment BMP category by implementing vacuum pump and steam steril- izer replacements and retrofits. Due to the success of the initial vacuum pump and steam sterilizer projects described in this case study, EPA is implementing similar projects at several laboratories throughout the nation. Reducing Vacuum Pump System Water Use

15

Water Efficiency Improvements At Various Environmental Protection Agency Sites: Best Management Practices Case Study #12 „ Laboratory/Medical Equipment (Brochure), Federal Energy Management Program (FEMP)  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Protection Agency (EPA) built a Environmental Protection Agency (EPA) built a successful water conservation program and reduced potable water use through a series of initiatives at EPA laboratories. EPA completed projects in all of the U.S. Department of Energy (DOE) Federal Energy Management Program's (FEMP) 14 Best Management Practice (BMP) categories. The projects highlighted below demonstrate EPA's ability to reduce water use in the laboratory/medical equipment BMP category by implementing vacuum pump and steam steril- izer replacements and retrofits. Due to the success of the initial vacuum pump and steam sterilizer projects described in this case study, EPA is implementing similar projects at several laboratories throughout the nation. Reducing Vacuum Pump System Water Use

16

Medical Assisting Medical Assistants perform routine administrative and clinical tasks to keep the offices of physi-  

E-Print Network (OSTI)

Medical Assisting Medical Assistants perform routine administrative and clinical tasks to keep. Medical assis- patients for x-rays, take electrocardiograms, remove sutures, and change dressings. Medical Description: Medical Assisting Associate of Applied Science (4 semesters after prerequisites are complet

Crone, Elizabeth

17

Current Research on Medical Slurry Cooling: Medical Ice Slurry...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applications Homeland Security Applications Biomedical Applications Medical Ice Slurry Coolants for Inducing Targeted-OrganTissue Protective Cooling Technology...

18

Ion Removal  

INLs ion removal technology leverages the ability of phosphazene polymers discriminate between water and metal ions, which allows water to pass ...

19

Application in Advanced Laparoscopic Procedures: Medical Ice...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applications Homeland Security Applications Biomedical Applications Medical Ice Slurry Coolants for Inducing Targeted-OrganTissue Protective Cooling Technology...

20

Medical Plans  

NLE Websites -- All DOE Office Websites (Extended Search)

Medical Plans Retiree Medical Insurance Blue Cross Blue Shield of New Mexico (BCBSNM) is the provider of medical benefits. Contact Retiree Insurance Providers Medical plan options...

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Wants, wishes, and wills: a medical and legal guide to protecting yourself and your family in sickness and in health, First edition  

Science Conference Proceedings (OSTI)

Take Control of Your Medical Care, Your Estate Planning, and the Legacy You LeaveIncludes checklists, examples, definitions, ideas, and a plain- English glossary of the terms you need to understand Whether you are single, married, old, young, ...

Wynne Whitman; Shawn Glisson

2007-05-01T23:59:59.000Z

22

General Counsel Legal Interpretation Regarding Medical Removal...  

NLE Websites -- All DOE Office Websites (Extended Search)

Word - Part 850 Interpretation to be posted on GC Website with date 8 16 2012 More Documents & Publications Audit Report: IG-0783 Audit Report: IG-0737 Audit Report: IG-0726...

23

MEDICAL/ DENTAL/ VISION ENROLLMENT / CHANGE FORM  

E-Print Network (OSTI)

MEDICAL/ DENTAL/ VISION ENROLLMENT / CHANGE FORM Changes are effective the 1st of the next month UNM Medical Plan Third Party Administrator Election Dental Plan Election Vision Plan Election Lovelace: (Add or Remove) Mark Type of Coverage for each Enrollee Spouse Add Remove Medical Dental Vision

New Mexico, University of

24

Remove Insert  

E-Print Network (OSTI)

2. ACTION. Area and district commanders; commanders of maintenance and logistics commands and CG Activities Europe; commanding officers of headquarters units; and Chiefs of Offices and special staff divisions at Headquarters shall ensure compliance with the provisions of this Notice. 3. SUMMARY OF CHANGES. These changes alter the disposition of some medical records and extend the freeze on Coast Guard environmental records. 4. PROCEDURES. Make the following page changes.

Second St. S. W; Management Manual; Comdtinst M

1982-01-01T23:59:59.000Z

25

Technology Description: Medical Ice Slurry Coolants for Inducing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applications Homeland Security Applications Biomedical Applications Medical Ice Slurry Coolants for Inducing Targeted-OrganTissue Protective Cooling Technology...

26

Former Worker Medical Screening Program - Lawrence Livermore...  

NLE Websites -- All DOE Office Websites (Extended Search)

Livermore National Laboratory Former Workers Former Worker Medical Screening Program (FWP) Project Name: Worker Health Protection Program Covered DOE Site: LLNL...

27

High removal rate laser-based coating removal system  

DOE Patents (OSTI)

A compact laser system that removes surface coatings (such as paint, dirt, etc.) at a removal rate as high as 1000 ft.sup.2 /hr or more without damaging the surface. A high repetition rate laser with multiple amplification passes propagating through at least one optical amplifier is used, along with a delivery system consisting of a telescoping and articulating tube which also contains an evacuation system for simultaneously sweeping up the debris produced in the process. The amplified beam can be converted to an output beam by passively switching the polarization of at least one amplified beam. The system also has a personal safety system which protects against accidental exposures.

Matthews, Dennis L. (Moss Beach, CA); Celliers, Peter M. (Berkeley, CA); Hackel, Lloyd (Livermore, CA); Da Silva, Luiz B. (Danville, CA); Dane, C. Brent (Livermore, CA); Mrowka, Stanley (Richmond, CA)

1999-11-16T23:59:59.000Z

28

CRBRP decay heat removal systems  

SciTech Connect

The Decay Heat Removal Systems for the Clinch River Breeder Reactor Plant (CRBRP) are designed to adequately remove sensible and decay heat from the reactor following normal shutdown, operational occurrences, and postulated accidents on both a short term and a long term basis. The Decay Heat Removal Systems are composed of the Main Heat Transport System, the Main Condenser and Feedwater System, the Steam Generator Auxiliary Heat Removal System (SGAHRS), and the Direct Heat Removal Service (DHRS). The overall design of the CRBRP Decay Heat Removal Systems and the operation under normal and off-normal conditions is examined. The redundancies of the system design, such as the four decay heat removal paths, the emergency diesel power supplies, and the auxiliary feedwater pumps, and the diversities of the design such as forced circulation/natural circulation and AC Power/DC Power are presented. In addition to overall design and system capabilities, the detailed designs for the Protected Air Cooled Condensers (PACC) and the Air Blast Heat Exchangers (ABHX) are presented.

Hottel, R.E.; Louison, R.; Boardman, C.E.; Kiley, M.J.

1977-01-01T23:59:59.000Z

29

Medical Image Integrity Control Combining Digital Signature and Lossless Watermarking  

E-Print Network (OSTI)

Medical Image Integrity Control Combining Digital Signature and Lossless Watermarking W. Pan1,3 , G protection of medical content becomes a major issue of computer security. Since medical contents are more proposed as a com- plementary mechanism for medical data protection. In this paper, we focus

Paris-Sud XI, Université de

30

Medical and Medical Related Questions  

NLE Websites -- All DOE Office Websites (Extended Search)

Medical Related Questions We do not have any medical experts in our volunteer expert pool. We recommend that you contact your health care professional regarding your question, if...

31

Engine Removal Projection Tool  

DOE Green Energy (OSTI)

The US Navy has over 3500 gas turbine engines used throughout the surface fleet for propulsion and the generation of electrical power. Past data is used to forecast the number of engine removals for the next ten years and determine engine down times between removals. Currently this is done via a FORTRAN program created in the early 1970s. This paper presents results of R&D associated with creating a new algorithm and software program. We tested over 60 techniques on data spanning 20 years from over 3100 engines and 120 ships. Investigated techniques for the forecast basis including moving averages, empirical negative binomial, generalized linear models, Cox regression, and Kaplan Meier survival curves, most of which are documented in engineering, medical and scientific research literature. We applied those techniques to the data, and chose the best algorithm based on its performance on real-world data. The software uses the best algorithm in combination with user-friendly interfaces and intuitively understandable displays. The user can select a specific engine type, forecast time period, and op-tempo. Graphical displays and numerical tables present forecasts and uncertainty intervals. The technology developed for the project is applicable to other logistic forecasting challenges.

Ferryman, Thomas A.; Matzke, Brett D.; Wilson, John E.; Sharp, Julia L.; Greitzer, Frank L.

2005-06-02T23:59:59.000Z

32

SPIE Medical Imaging Medical Imaging  

E-Print Network (OSTI)

1 SPIE Medical Imaging 2006 1 Medical Imaging Fundamentals Kenneth H. Wong, Ph.D. Division of Computer Assisted Interventions and Medical Robotics (CAIMR) Imaging Science and Information Systems (ISIS) Center Department of Radiology Georgetown University SPIE Medical Imaging 2006 2 Main Themes · Describe

Miga, Michael I.

33

Removal - An alternative to clearance  

SciTech Connect

This presentation shows the differences between the application of clearance and removal, both being procedures for materials leaving radiation protection areas permanently. The differentiation will be done on the basis of the German legislation but may be also applicable for other national legislation. For clearance in Germany two basic requirements must be given, i.e. that the materials are activated or contaminated and that they result from the licensed use or can be assigned to the scope of the license. Clearance needs not to be applied to objects in Germany which are to be removed only temporarily from controlled areas with the purpose of repair or reuse in other controlled areas. In these cases only the requirements of contamination control apply. In the case of removal it must either be proved by measurements that the relevant materials are neither activated nor contaminated or that the materials result from areas where activation or contamination is impossible due to the operational history considering operational procedures and events. If the material is considered neither activated nor contaminated there is no need for a clearance procedure. Therefore, these materials can be removed from radiation protection areas and the removal is in the responsibility of the licensee. Nevertheless, the removal procedure and the measuring techniques to be applied for the different types of materials need an agreement from the competent authority. In Germany a maximum value of 10% of the clearance values has been established in different licenses as a criterion for the application of removal. As approximately 2/3 of the total mass of a nuclear power plant is not expected to be contaminated or activated there is a need for such a procedure of removal for this non contaminated material without any regulatory control especially in the case of decommissioning. A remarkable example is NPP Stade where in the last three years more than 8600 Mg were disposed of by removal and only 315 Mg were released by clearance, even before the decommissioning licensing procedure was finished. (authors)

Feinhals, J.; Kelch, A. [TUV NORD SysTec GmbH and Co. KG, Hamburg (Germany); Kunze, V. [Federal Office for Radiation Protection, Salzgitter (Germany)

2007-07-01T23:59:59.000Z

34

Therapeutic Hypothermia: Protective Cooling Using Medical Ice ...  

Emergency Responders More Time Video: Laparoscopic Partial Nephrectomy with Ice Slurry as Coolant in the Porcine Model License Status: Available for ...

35

High removal rate laser-based coating removal system  

Science Conference Proceedings (OSTI)

A compact laser system is disclosed that removes surface coatings (such as paint, dirt, etc.) at a removal rate as high as 1,000 ft{sup 2}/hr or more without damaging the surface. A high repetition rate laser with multiple amplification passes propagating through at least one optical amplifier is used, along with a delivery system consisting of a telescoping and articulating tube which also contains an evacuation system for simultaneously sweeping up the debris produced in the process. The amplified beam can be converted to an output beam by passively switching the polarization of at least one amplified beam. The system also has a personal safety system which protects against accidental exposures.

Matthews, D.L.; Celliers, P.M.; Hackel, L.; Da Silva, L.B.; Dane, C.B.; Mrowka, S.

1999-11-16T23:59:59.000Z

36

Turbomachinery debris remover  

DOE Patents (OSTI)

An apparatus for removing debris from a turbomachine. The apparatus includes housing and remotely operable viewing and grappling mechanisms for the purpose of locating and removing debris lodged between adjacent blades in a turbomachine.

Krawiec, Donald F. (Pittsburgh, PA); Kraf, Robert J. (North Huntingdon, PA); Houser, Robert J. (Monroeville, PA)

1988-01-01T23:59:59.000Z

37

Protective Relays: Numerical Protective Relays  

Science Conference Proceedings (OSTI)

Protective relays are decision-making elements in the protection scheme for electrical power systems. Numerical relays offer many advantages over the traditional electromechanical types of devices. This guide provides an overview of numerical relays and discusses maintenance and testing.

2004-12-22T23:59:59.000Z

38

Former Worker Medical Screening Program - Lawrence Berkeley National...  

NLE Websites -- All DOE Office Websites (Extended Search)

Berkeley National Laboratory Former Workers Former Worker Medical Screening Program (FWP) Project Name: Worker Health Protection Program Covered DOE Site: LBNL...

39

Former Worker Medical Screening Program - Nevada Former Workers  

NLE Websites -- All DOE Office Websites (Extended Search)

Nevada Former Workers Former Worker Medical Screening Program (FWP) Project Name: Worker Health Protection Program Covered DOE Site: NNSS and other DOE locations in Las Vegas...

40

Former Worker Medical Screening Program - Mound Former Production...  

NLE Websites -- All DOE Office Websites (Extended Search)

Production Workers Former Worker Medical Screening Program (FWP) Project Name: Worker Health Protection Program Covered DOE Site: Mound Worker Population Served: Production Workers...

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Former Worker Medical Screening Program - Sandia National Laboratory...  

NLE Websites -- All DOE Office Websites (Extended Search)

CA) Former Workers Former Worker Medical Screening Program (FWP) Project Name: Worker Health Protection Program Covered DOE Site: SNL (CA) Worker Population Served: All workers...

42

Former Worker Medical Screening Program - Oak Ridge Y-12 and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Y-12 and Oak Ridge National Laboratory Former Production Workers Former Worker Medical Screening Program (FWP) Project Name: Worker Health Protection Program Covered DOE Site: Y-12...

43

Profiling symmetric encryption algorithms for implantable medical devices.  

E-Print Network (OSTI)

??The amount of Implantable Medical Devices (IMD) keeps booming in recent years. However, not many of them have encryption and decryption methods to protect their (more)

Zhu, D.

2008-01-01T23:59:59.000Z

44

Graphitic packing removal tool  

DOE Patents (OSTI)

Graphitic packing removal tools are described for removal of the seal rings in one piece from valves and pumps. The packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal.

Meyers, K.E.; Kolsun, G.J.

1996-12-31T23:59:59.000Z

45

Medical Sites  

NLE Websites -- All DOE Office Websites (Extended Search)

Medical Sites Name: Jenielle Location: NA Country: NA Date: NA Question: I started itching Aug. 1999. Diagnosed with ITP Oct.1999. I am in remission With a platelet count in...

46

Insider protection  

SciTech Connect

The government community is broadly addressing the insider threat. The first section of this paper defines protection approaches and the latter sections present various applicable technology developments. The bulk of the paper discusses technology developments applied to (1) personnel and material tracking and inventory, (2) classified document protection, and (3) protecting security systems. The personnel and material tracking system uses a PC based-host to (1) collect information from proximity tags and material movement sensors, (2) apply rules to this input to assure that the ongoing activity meets the site selectable rules and, (3) forward the results to either an automated inventory system or an alarm system. The document protection system uses a PC network to efficiently and securely control classified material which is stored on write-once-read-mostly optical media. The protection of sensor to multiplexer communications in a security system is emphasized in the discussion of protecting security systems.

Waddoups, I.G.

1993-07-01T23:59:59.000Z

47

Protecting FWP Participant Personally Identifiable Information/Protected  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Protecting FWP Participant Personally Identifiable Protecting FWP Participant Personally Identifiable Information/Protected Health Information Protecting FWP Participant Personally Identifiable Information/Protected Health Information The confidentiality and privacy rights of former workers are not only a legal requirement, they are crucial to establishing and maintaining credibility with the former worker community. All medical information that is collected as part of this program is treated as confidential and is used only as allowed by the Privacy Act of 1974. All FWP activities are conducted with the approval of the Institutional Review Boards, or Human Subjects Committees, of DOE and involved universities. All individuals sign an informed consent and Health Insurance Portability and Accountability Act

48

Device for removing blackheads  

DOE Patents (OSTI)

A device for removing blackheads from pores in the skin having a elongated handle with a spoon shaped portion mounted on one end thereof, the spoon having multiple small holes piercing therethrough. Also covered is method for using the device to remove blackheads.

Berkovich, Tamara (116 N. Wetherly Dr., Suite 115, Los Angeles, CA)

1995-03-07T23:59:59.000Z

49

Silica Scaling Removal Process  

NLE Websites -- All DOE Office Websites (Extended Search)

Silica Scaling Removal Process Silica Scaling Removal Process Silica Scaling Removal Process Scientists at Los Alamos National Laboratory have developed a novel technology to remove both dissolved and colloidal silica using small gel particles. Available for thumbnail of Feynman Center (505) 665-9090 Email Silica Scaling Removal Process Applications: Cooling tower systems Water treatment systems Water evaporation systems Potential mining applications (produced water) Industry applications for which silica scaling must be prevented Benefits: Reduces scaling in cooling towers by up to 50% Increases the number of cycles of concentration substantially Reduces the amount of antiscaling chemical additives needed Decreases the amount of makeup water and subsequent discharged water (blowdown) Enables considerable cost savings derived from reductions in

50

Cattail Protection  

NLE Websites -- All DOE Office Websites (Extended Search)

Cattail Protection Cattail Protection Name: Julie Location: N/A Country: N/A Date: N/A Question: Is a piece of land protected by cattails protected? (Meaning you can not touch, cover up or build on.) Replies: Hi Julie, It's quite possible that a piece of land with cattails is protected as a wetland. There are some federal (and probably state) statutes on wetland protection, in general you have to file environmental impact statements and such. I've heard of cases where some large projects were allowed to encroach on wetlands when the builders signed contracts requiring they construct a wetland of equivalent size on another parcel of land. Donald Yee Ph.D. I assume you are referring to wetlands protections. Cattails are wetland plants, and there are regulations governing - but not necessarily preventing - the development of wetlands, but cattails are also aggressive and somewhat weedy, so I doubt the presence of cattails alone would be sufficient to call an area a wetland. This is a technical question which all too often lands in legal dispute. Check with the Corps of Engineers, the EPA, and other experts in wetlands delineation and regulation.

51

Laundered protective clothing survey  

SciTech Connect

It is considered appropriate occasionally to make independent checks on the effectiveness of the plant laundry in removing radioactive contamination from plant-issue protective clothing. Previous surveys have offered constructive criticism resulting in improved handling of high level and soft beta contaminated clothing and incorporation in new designs of ventilating and air sampling recommendations. Recurrently the adequacy of laundry reject limits is questioned, and only recently an accurate, special study resulted in relaxed limits for Metal Preparation area clothing. A current question concerns the advisability of determining the reject level on the beta-gamma monitor more frequently than once a day. 2 tabs.

Clukey, H.V.

1952-10-15T23:59:59.000Z

52

Public comment sought on hot cell removal project at the Idaho Site�s  

NLE Websites -- All DOE Office Websites (Extended Search)

Public comment sought on hot cell removal project at the Idaho Site�s Advanced Test Reactor Complex Public comment sought on hot cell removal project at the Idaho Site�s Advanced Test Reactor Complex The U.S. Department of Energy (DOE) is seeking public comment on a project to remove three unused hot cells and the 1950s era laboratory building that contains them at the Idaho Site�s Advanced Test Reactor complex. An Engineering Evaluation/Cost Analysis (EE/CA) document with three proposed alternatives for the final end state of the building and hot cells is under evaluation by DOE, the U.S. Environmental Protection Agency, and Idaho�s Department of Environmental Quality. The TRA-632 building and the hot cells were built in 1952 for assembly, disassembly and examination of nuclear test reactor components. The 13,000 sq. foot building contains three shielded hot cells with lathes, power saws, grinders, and other remote handling equipment. In addition to the examination of test reactor components, the hot cells have been used during the production of radioisotopes for medical use like cobalt-60 and iridium-192. The last active work in the hot cells took place in 2004, and the aging facility was placed on standby in 2006.

53

Continuous sulfur removal process  

DOE Patents (OSTI)

A continuous process for the removal of hydrogen sulfide from a gas stream using a membrane comprising a metal oxide deposited on a porous support is disclosed. 4 figures.

Jalan, V.; Ryu, J.

1994-04-26T23:59:59.000Z

54

G I A. J. Brcslill, Director halt:: Protection Ci&ieerirG Divisio:l  

Office of Legacy Management (LM)

G G I A. J. Brcslill, Director halt:: Protection Ci&ieerirG Divisio:l H. Glauberrrrr: iiealt;: Protection &;'ineeri::i: Division SURVEY OF IIOOD BUILDING DECO~iTX.fIi~ATIO.:i . 'L. KSH: 3G I viz&Led t.:e Hood Buildiiig on July 3, 1763 wit:. Lr. R. C;iamberli!: axd NY. F. M!sce of the &scac..zetts Institute of Teci:;iolozy, Occupational Medical Service, Mr. R. Hoxell, Massac::usetIs Insti.t.ule of Tec:fioloGy, Btlilding Maintenance, and NE. P. Russo of Cx-Rad, to perform a fhal radiatioi: survey of the site remairs. Tr.e building was completely denolisi:ed except for t e baseme:% vizlls a:.d sections of tiie colicrete flax. All ~buildir;;: materials aid debris assodiated witri the demolition p?&se ilad bee:: removed from '~:ie si.Le a;ld properly

55

Medical Signal Searching  

E-Print Network (OSTI)

Heart Failure. Journal of Medical Systems (JOMS), June 2011.heartbeat classification. Medical engineering & physics, [M. Gerla. Opportunistic medical monitoring using bluetooth

Woodbridge, Jonathan Scott

2012-01-01T23:59:59.000Z

56

Fire Protection  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-STD-1066-2012 December 2012 _______________ Supersedes DOE-STD-1066-99 DOE STANDARD FIRE PROTECTION U.S. Department of Energy AREA FIRP Washington, DC 20585 DISTRIBUTION STATEMENT. Approved for public release; distribution is unlimited. This document is available on the Department of Energy Technical Standards Program Web page at http://www.hss.doe.gov/nuclearsafety/ns/techstds/ DOE-STD-1066-2012 FOREWORD This Department of Energy (DOE) Standard (STD) supersedes DOE-STD-1066-99 1 and is approved for use by DOE and its contractors. The following fire protection standard is canceled with the issuance of this Standard and appropriate technical content was incorporated into this Standard:  DOE-STD-1088-95, Fire Protection for Relocatable Structures

57

Wetlands Protection Act (Massachusetts) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Protection Act (Massachusetts) Protection Act (Massachusetts) Wetlands Protection Act (Massachusetts) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Massachusetts Program Type Environmental Regulations Provider Department of Environmental Protection This Act establishes regulations regarding the removal, dredging, filling,

58

Removable feedwater sparger assembly  

DOE Patents (OSTI)

A removable feedwater sparger assembly includes a sparger having an inlet pipe disposed in flow communication with the outlet end of a supply pipe. A tubular coupling includes an annular band fixedly joined to the sparger inlet pipe and a plurality of fingers extending from the band which are removably joined to a retention flange extending from the supply pipe for maintaining the sparger inlet pipe in flow communication with the supply pipe. The fingers are elastically deflectable for allowing engagement of the sparger inlet pipe with the supply pipe and for disengagement therewith. 8 figs.

Challberg, R.C.

1994-10-04T23:59:59.000Z

59

Medical (visual) information retrieval  

Science Conference Proceedings (OSTI)

This text gives a broad overview of the domain of visual medical information retrieval and medical information analysis/search in general. The goal is to describe the specifics of medical information analysis and more specifically of medical visual information ... Keywords: content-based image retrieval, medical information retrieval, medical visual information retrieval

Henning Mller

2012-01-01T23:59:59.000Z

60

Thinking About Medical School?  

E-Print Network (OSTI)

Thinking About Medical School? Explore the DO Difference! Osteopathic Medical Education Training's Osteopathic Medical Schools · Meet with Medical School Admission Officers · Learn about osteopathic medicine and medical schools · Discover the best ways to prepare for medical school When Where Pre-Health Advisor

de Lijser, Peter

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

PRE-MEDICAL PROFESSIONS Medical professional schools  

E-Print Network (OSTI)

PRE-MEDICAL PROFESSIONS Medical professional schools encourage students to develop the broadest requirements required for application to the following medical professional schools include: chiropractic medicine programs, as well as other programs in the medical field. A Bachelor's degree is required

62

DOE Removes Brookhaven Contractor  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE Removes DOE Removes Brookhaven Contractor Peña sends a message to DOE facilities nationwide INSIDE 2 Accelerator Rx 4 FermiKids 6 Spring at Fermilab Photos courtesy of Brookhaven National Laboratory by Judy Jackson, Office of Public Affairs Secretary of Energy Federico Peña announced on Thursday, May 1, that the Department of Energy would immediately terminate the current management contract with Associated Universities, Inc. at Brookhaven National Laboratory in Upton, New York. Peña said that he made the decision after receiving the results of a laboratory safety management review conducted by the independent oversight arm of DOE's Office of Environment, Safety and Health. In addition, the Secretary said he found unacceptable "the continued on page 8 Volume 20 Friday, May 16, 1997

63

Pneumatic soil removal tool  

DOE Patents (OSTI)

A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

Neuhaus, John E. (Newport News, VA)

1992-01-01T23:59:59.000Z

64

Pneumatic soil removal tool  

Science Conference Proceedings (OSTI)

A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

Neuhaus, J.E.

1992-10-13T23:59:59.000Z

65

Method of preparation of removable syntactic foam  

DOE Patents (OSTI)

Easily removable, environmentally safe, low-density, syntactic foams are disclosed which are prepared by mixing insoluble microballoons with a solution of water and/or alcohol-soluble polymer to produce a pourable slurry, optionally vacuum filtering the slurry in varying degrees to remove unwanted solvent and solute polymer, and drying to remove residual solvent. The properties of the foams can be controlled by the concentration and physical properties of the polymer, and by the size and properties of the microballoons. The suggested solute polymers are non-toxic and soluble in environmentally safe solvents such as water or low-molecular weight alcohols. The syntactic foams produced by this process are particularly useful in those applications where ease of removability is beneficial, and could find use in packaging recoverable electronic components, in drilling and mining applications, in building trades, in art works, in the entertainment industry for special effects, in manufacturing as temporary fixtures, in agriculture as temporary supports and containers and for delivery of fertilizer, in medicine as casts and splints, as temporary thermal barriers, as temporary protective covers for fragile objects, as filters for particulate matter, which matter may be easily recovered upon exposure to a solvent, as in-situ valves (for one-time use) which go from maximum to minimum impedance when solvent flows through, and for the automatic opening or closing of spring-loaded, mechanical switches upon exposure to a solvent, among other applications.

Arnold, Jr., Charles (Albuquerque, NM); Derzon, Dora K. (Albuquerque, NM); Nelson, Jill S. (Albuquerque, NM); Rand, Peter B. (Albuquerque, NM)

1995-01-01T23:59:59.000Z

66

Method of preparation of removable syntactic foam  

DOE Patents (OSTI)

Easily removable, environmentally safe, low-density, syntactic foams are disclosed which are prepared by mixing insoluble microballoons with a solution of water and/or alcohol-soluble polymer to produce a pourable slurry, optionally vacuum filtering the slurry in varying degrees to remove unwanted solvent and solute polymer, and drying to remove residual solvent. The properties of the foams can be controlled by the concentration and physical properties of the polymer, and by the size and properties of the microballoons. The suggested solute polymers are non-toxic and soluble in environmentally safe solvents such as water or low-molecular weight alcohols. The syntactic foams produced by this process are particularly useful in those applications where ease of removability is beneficial, and could find use in packaging recoverable electronic components, in drilling and mining applications, in building trades, in art works, in the entertainment industry for special effects, in manufacturing as temporary fixtures, in agriculture as temporary supports and containers and for delivery of fertilizer, in medicine as casts and splints, as temporary thermal barriers, as temporary protective covers for fragile objects, as filters for particulate matter, which matter may be easily recovered upon exposure to a solvent, as in-situ valves (for one-time use) which go from maximum to minimum impedance when solvent flows through, and for the automatic opening or closing of spring-loaded, mechanical switches upon exposure to a solvent, among other applications. 1 fig.

Arnold, C. Jr.; Derzon, D.K.; Nelson, J.S.; Rand, P.B.

1995-07-11T23:59:59.000Z

67

Method of arsenic removal from water  

DOE Patents (OSTI)

A method for low-cost arsenic removal from drinking water using chemically prepared bottom ash pre-treated with ferrous sulfate and then sodium hydroxide. Deposits on the surface of particles of bottom ash form of activated iron adsorbent with a high affinity for arsenic. In laboratory tests, a miniscule 5 grams of pre-treated bottom ash was sufficient to remove the arsenic from 2 liters of 2400 ppb (parts per billion) arsenic-laden water to a level below 50 ppb (the present United States Environmental Protection Agency limit). By increasing the amount of pre-treated bottom ash, even lower levels of post-treatment arsenic are expected. It is further expected that this invention supplies a very low-cost solution to arsenic poisoning for large population segments.

Gadgil, Ashok (El Cerrito, CA)

2010-10-26T23:59:59.000Z

68

Medical tourism: Outsourcing surgery  

Science Conference Proceedings (OSTI)

A trend emerging in recent years has been travel from industrialized nations to developing countries such as India and Thailand for purposes of undergoing medical procedures, a phenomenon we call medical tourism. Medical tourism offers the prospect of ... Keywords: ANP models, Medical outsourcing, Medical tourism

William Bies; Lefteris Zacharia

2007-10-01T23:59:59.000Z

69

Medical Humanities Introduction  

E-Print Network (OSTI)

in the making: Memoirs and medical education. Iowa City, IA:shoes: empathy and othering in medical students' education.through the thread of medical humanities 1 . The essay by

Shapiro, Johanna

2009-01-01T23:59:59.000Z

70

Green manufacturing in the medical device industry : a case study  

E-Print Network (OSTI)

Introduction: Med Dev (name changed to protect confidentiality), is a medical device start-up using tissue engineering and drug delivery techniques to help combat the negative effects associated with secondary injury. Med ...

Gautreau, Leigh (Leigh Ann)

2009-01-01T23:59:59.000Z

71

Brookhaven Medical Research Reactor  

NLE Websites -- All DOE Office Websites (Extended Search)

Medical Research Reactor BMRR The last of the Lab's reactors, the Brookhaven Medical Research Reactor (BMRR), was shut down in December 2000. The BMRR was a three megawatt...

72

Remote plunger removal device for small-scale incremental pressing  

SciTech Connect

Small-scale pressing of high explosives (HE) at Los Alamos National Laboratory (LANL) and elsewhere is routinely performed using pneumatic presses. Blast shields provide protection to the operator during the pressing procedure, but safety of the operator is a concern during removal of the plunger, which is currently performed manually. To minimize this risk, very high tolerances between the plunger and the die are required. These tolerances are often very costly, especially in the case of long, relatively narrow dies. The safety issue is an even greater concern with incremental pressing in which cleaning the die between increments is difficult or impossible. To better protect press operators, a device has been designed and constructed to allow remote plunger removal in a standard HE press. In this report the authors describe this modified press that allows remote removal of the plunger.

Burnside, N.J.; Son, S.F.; Asay, B.W.

1997-09-01T23:59:59.000Z

73

Geothermal hydrogen sulfide removal  

DOE Green Energy (OSTI)

UOP Sulfox technology successfully removed 500 ppM hydrogen sulfide from simulated mixed phase geothermal waters. The Sulfox process involves air oxidation of hydrogen sulfide using a fixed catalyst bed. The catalyst activity remained stable throughout the life of the program. The product stream composition was selected by controlling pH; low pH favored elemental sulfur, while high pH favored water soluble sulfate and thiosulfate. Operation with liquid water present assured full catalytic activity. Dissolved salts reduced catalyst activity somewhat. Application of Sulfox technology to geothermal waters resulted in a straightforward process. There were no requirements for auxiliary processes such as a chemical plant. Application of the process to various types of geothermal waters is discussed and plans for a field test pilot plant and a schedule for commercialization are outlined.

Urban, P.

1981-04-01T23:59:59.000Z

74

Pneumatic soil removal tool  

Science Conference Proceedings (OSTI)

A soil tool is provided for removing radioactive soil, rock and debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator value mounted on the handle, to provide movement of the movable jaw.

Neuhaus, J.F.

1991-01-23T23:59:59.000Z

75

olants for Targeted Organ-Protective-Cooling During Surgery and...  

NLE Websites -- All DOE Office Websites (Extended Search)

A U.S. Department of Energy laboratory managed by UChicago Argonne, LLC Medical Ice Slurry Coolants for Inducing Targeted- OrganTissue Protective Cooling by: Dr. Ken Kasza (PhD;...

76

Emergency Medical Treatment Required  

E-Print Network (OSTI)

Emergency Medical Treatment Required Non-Emergency Medical Treatment Required If possible, get help present if possible OptaComp will complete the "First Report of Injury or Illness" and authorize medical Investigation Report" to Environmental Health & Safety within 48 hours Emergency Medical Treatment Required

Weston, Ken

77

Medicine and Medical Center  

E-Print Network (OSTI)

Faculty of Medicine and Medical Center (FM/AUBMC) #12;370 Faculty of Medicine and Medical Center (FM/AUBMC) Graduate Catalogue 2013­14 Faculty of Medicine and Medical Center (FM/AUBMC) Officers Vice President for Medical Affairs and the Raja N. Khuri Dean of the Faculty of Medicine Ziyad Ghazzal

78

Medical Applications of Non-Medical Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Applications Applications Medical Applications of Non of Non - - Medical Research Medical Research Applications Derived from Applications Derived from BES BES - - Supported Research Supported Research and Research at BES Facilities and Research at BES Facilities Office of Basic Energy Sciences Office of Energy Research * U.S. Department of Energy July 1998 i Table of Contents The Office of Basic Energy Sciences ..............................................................................................1 1. DISEASE DIAGNOSIS.............................................................................................................1 Thin-Film Lithium Batteries for Biomedical Applications (ORNL)......................................1 Positron Emission Tomography (BNL)

79

Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces the Risk along the Columbia River Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces the Risk along the Columbia River September 13, 2012 - 12:00pm Addthis Media Contacts Cameron Salony, DOE Cameron.Salony@rl.doe.gov 509-376-0402 Dee Millikin, CH2M HILL Plateau Remediation Company Dee_Millikin@rl.gov 509-376-1297 RICHLAND, WASH. - The U.S. Department of Energy (DOE) and contractor CH2M HILL Plateau Remediation Company (CH2M HILL) announced today the removal of the first phase of highly radioactive sludge from under water storage in the K West Basin about 400 yards away from the Columbia River. "This is a major step forward in protecting the river and a historic

80

Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces the Risk along the Columbia River Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces the Risk along the Columbia River September 13, 2012 - 12:00pm Addthis Media Contacts Cameron Salony, DOE Cameron.Salony@rl.doe.gov 509-376-0402 Dee Millikin, CH2M HILL Plateau Remediation Company Dee_Millikin@rl.gov 509-376-1297 RICHLAND, WASH. - The U.S. Department of Energy (DOE) and contractor CH2M HILL Plateau Remediation Company (CH2M HILL) announced today the removal of the first phase of highly radioactive sludge from under water storage in the K West Basin about 400 yards away from the Columbia River. "This is a major step forward in protecting the river and a historic

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

MEDICAL EVACUATION DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

FM 4-02.2 May 2007 MEDICAL EVACUATION DISTRIBUTION RESTRICTION: Approved for public release, DC, 30 July 2009 MEDICAL EVACUATION 1. Change FM 4-02.2, 8 May 2007, as follows: Remove old pages-02.2 Department of the Army Washington, DC, 8 May 2007 MEDICAL EVACUATION Contents Page PREFACE

US Army Corps of Engineers

82

Removal to Maximum Extent Practical  

Energy.gov (U.S. Department of Energy (DOE))

Summary Notes from 1 November 2007 Generic Technical Issue Discussion on Removal of Highly Radioactive Radionuclides/Key Radionuclides to the Maximum Extent Practical

83

DOE Advanced Protection Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Task 3 - Advanced Protection - Evaluate measures - 2009 - Design, model Irvine Smart Grid Demo protection system - 2010 6 Copyright 2010, Southern California Edison Task 1 -...

84

Effective April 11, 2003 THIS NOTICE DESCRIBES HOW MEDICAL INFORMATION ABOUT YOU MAY BE USED AND DISCLOSED AND  

E-Print Network (OSTI)

officials: (1) for intelligence, counterintelligence, and other national security activities authorized protected health information for medical research purposes. · National Security, Intelligence Activities

85

Medical Device Reliability  

Science Conference Proceedings (OSTI)

... failure rates of implanted electric leads has ... from the International Electronics Manufacturing Initiative ... for medical-grade electronic components and ...

2013-01-30T23:59:59.000Z

86

Archaeological Resource Protection Act | Open Energy Information  

Open Energy Info (EERE)

Resource Protection Act Resource Protection Act Year 1979 Url [[File:|160px|link=]] Description Pub.L. 96-95 as amended, 93 Stat. 721, codified at 16 U.S.C. §§ 470aa-470mm References National Park Service ARPA Information[1] The Archaeological Resources Protection Act of 1979, also referred to as ARPA, is a federal law of the United States passed in 1979 and amended in 1988. It governs the excavation of archaeological sites on federal and Indian lands in the United States, and the removal and disposition of archaeological collections from those sites and is administered by the National Park Service. References ↑ "National Park Service ARPA Information" Retrieved from "http://en.openei.org/w/index.php?title=Archaeological_Resource_Protection_Act&oldid=44856

87

Archaeological Resources Protection Act | Open Energy Information  

Open Energy Info (EERE)

Resources Protection Act Resources Protection Act Year 1979 Url [[File:|160px|link=http://www.nps.gov/archeology/tools/Laws/arpa.htm]] Description 16 U.S.C. 470aa-470mm; Public Law 96-95 and amendments References National Park Service ARPA Information[1] The Archaeological Resources Protection Act of 1979, also referred to as ARPA, is a federal law of the United States passed in 1979 and amended in 1988. It governs the excavation of archaeological sites on federal and Indian lands in the United States, and the removal and disposition of archaeological collections from those sites and is administered by the National Park Service. 16 USC 470aa-470mm - Statute Text 43 CFR 7 - Regulation Text References ↑ "National Park Service ARPA Information" Retrieved from "http://en.openei.org/w/index.php?title=Archaeological_Resources_Protection_Act&oldid=44853

88

Cavern Protection (Texas) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cavern Protection (Texas) Cavern Protection (Texas) Cavern Protection (Texas) < Back Eligibility Utility Fed. Government Commercial Investor-Owned Utility Industrial Construction Municipal/Public Utility Local Government Rural Electric Cooperative Tribal Government Savings Category Buying & Making Electricity Program Info State Texas Program Type Siting and Permitting Provider Texas General Land Office It is public policy of the state to provide for the protection of caves on or under Texas lands. For the purposes of this legislation, "cave" means any naturally occurring subterranean cavity, and includes or is synonymous with cavern, pit, pothole, well, sinkhole, and grotto. No person may excavate, remove, destroy, injure, alter in any significant manner, or deface any part of a cave owned by the State of Texas, unless the person

89

Chief Medical Officer: Occupational Medicine in Security  

NLE Websites -- All DOE Office Websites (Extended Search)

Security Security Security requirements provide for the medical assessment of employees to identify potential threats against the nuclear information, materials, and weapons over which DOE holds jurisdiction. When effectively integrated with the services of personnel security, counterintelligence, and other allied security professionals, medical services contribute directly to national security. In addition, workplace violence has increasingly been recognized as safety and security concern which warrants organizational planning and response. The following policy, guidance, and additional resources may apply. 1. Access Authorization Programs 2. Human Reliability Programs 3. Physical Protection Programs 4. Workplace Violence Programs 5. Counterintelligence Programs

90

Animal Testing Medical Research  

E-Print Network (OSTI)

Animal Testing In Medical Research Past, present and future. Marte Thomassen Ellen Trolid Tonje Arondsen Marit Gystøl #12;ZO-8091 Forsøksdyrlære Animal experiments in medical research NTNU ­ Norges ................................................................................................................................................ 9 7. THE FUTURE OF ANIMALS IN MEDICAL RESEARCH.21

Bech, Claus

91

Tracing Medical Images Using Multi-Band Watermarks Mingyan Li, Sreeram Narayanan and Radha Poovendran  

E-Print Network (OSTI)

1 of 4 Tracing Medical Images Using Multi-Band Watermarks Mingyan Li, Sreeram Narayanan and Radha identify that there is a gap between current security solutions for the privacy protection of medical who distribute medical images illegally. We evaluate the suitability of some most widely used

Poovendran, Radha

92

Radiation Protection Guide For Medical Use of Radioactive Materials &  

E-Print Network (OSTI)

/Security Threat Possession of Deadly Weapons by Patients, Visitors, or Staff Bomb Threat UI Public Safety ­ 335 LIMITS and ASSESSMENT 6 3.1 Maximum Permissible Dose Limits 6 3.1.1 Radiation Workers 5 3.1.2 Declared Assessment 10 #12;v 4.0 RADIATION SAFETY TRAINING REQUIREMENTS 10 4.1 Initial Radiation Safety Training 10 4

93

Former Worker Medical Screening Program Related Documents & Links |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Former Former Worker Medical Screening Program Related Documents & Links Former Worker Medical Screening Program Related Documents & Links Related Documents & Links Beryllium Information-ORISE Chronic Beryllium Disease Information-National Jewish Health Department of Energy Human Subjects Protection Program DOE Covered Facilities Database Department of Labor Energy Employees Occupational Illness Compensation Program (EEOICP) Department of Labor EEOICP - Upcoming Events Department of Labor Office of the Ombudsman for EEOICPA NIOSH Advisory Board and Public Meetings NIOSH Division of Compensation Analysis and Support Project Websites Building Trades National Medical Screening Program Medical Exam Program for Former Workers at Los Alamos National Laboratory

94

Chief Medical Officer: Occupational Medicine in Health and Safety  

NLE Websites -- All DOE Office Websites (Extended Search)

Health and Safety Health and Safety Occupational health requirements provide for the medical support of employees through the prevention, management, and compensation of occupational injuries and illnesses. In addition, requirements for the medical assessment of employees working in the nuclear environment provide protection for those employees, their coworkers, and the public. The following policy, guidance, and additional resources may apply. A. General Occupational Health B. Hazard-Specific Occupational Health C. Hazardous Materials Occupational Health D. Nuclear Safety E. Medical Screening and Surveillance F. Former Worker Medical Screening and Compensation G. Epidemiology H. Injury and Illness Reporting and Recordkeeping A. General Occupational Health Federal Employees

95

Modern generator protection systems  

SciTech Connect

The special problems of the protection of generating stations with large machines connected to large integrated networks are presented. The coordination between the protective relays and tripping functions and the reliability of the protection scheme are important considerations in modern plants. Primary and backup protective functions, the applications, and their divisions into fault detection and ''fault prevention'' categories are considered. Testing and maintenance of the generator protection system including automatic calibration testing equipment is also discussed. The concept of the generator protection as a completely coordinated system and its realization with solid state protective relays is also presented. 9 refs.

Pencinger, C.J.

1981-01-01T23:59:59.000Z

96

DEDICATED HEAVY ION MEDICAL ACCELERATORS  

E-Print Network (OSTI)

et al. , ,8iological and Medical Research with Acceleratedet al. , "Biological and Medical Research with J\\cceleratedic Heavy Ions in Medical and Scientific Research, Edmonton,

Gough, R.A.

2013-01-01T23:59:59.000Z

97

Process for removing polychlorinated biphenyls from soil  

DOE Patents (OSTI)

The present invention relates to a method of removing polychlorinated biphenyls from soil. The polychlorinated biphenyls are extracted from the soil by employing a liquid organic solvent dispersed in water in the ratio of about 1:3 to 3:1. The organic solvent includes such materials as short-chain hydrocarbons including kerosene or gasoline which are immiscible with water and are nonpolar. The organic solvent has a greater affinity for the PCB's than the soil so as to extract the PCB's from the soil upon contact. The organic solvent phase is separated from the suspended soil and water phase and distilled for permitting the recycle of the organic solvent phase and the concentration of the PCB's in the remaining organic phase. The present process can be satisfactorily practiced with soil containing 10 to 20% petroleum-based oils and organic fluids such as used in transformers and cutting fluids, coolants and the like which contain PCB's. The subject method provides for the removal of a sufficient concentration of PCB's from the soil to provide the soil with a level of PCB's within the guidelines of the Environmental Protection Agency.

Hancher, C.W.; Saunders, M.B.; Googin, J.M.

1984-11-16T23:59:59.000Z

98

Jackson Park Hospital Green Building Medical Center  

Science Conference Proceedings (OSTI)

Jackson Park Hospital completed the construction of a new Medical Office Building on its campus this spring. The new building construction has adopted the City of Chicagoâ??s recent focus on protecting the environment, and conserving energy and resources, with the introduction of green building codes. Located in a poor, inner city neighborhood on the South side of Chicago, Jackson Park Hospital has chosen green building strategies to help make the area a better place to live and work.

William Dorsey; Nelson Vasquez

2010-03-01T23:59:59.000Z

99

Article removal device for glovebox  

DOE Patents (OSTI)

An article removal device for a glovebox is described comprising a conduit extending through a glovebox wall which may be closed by a plug within the glovebox, and a fire-resistant container closing the outer end of the conduit and housing a removable container for receiving pyrophoric or otherwise hazardous material without disturbing the interior environment of the glovebox or adversely affecting the environment outside of the glovebox. (Official Gazette)

Guyer, R.H.; Leebl, R.G.

1973-12-01T23:59:59.000Z

100

Medical School AdmissionsMedical School AdmissionsMedical School AdmissionsMedical School Admissions Monday, April 23rd  

E-Print Network (OSTI)

Medical School AdmissionsMedical School AdmissionsMedical School AdmissionsMedical School Part 1: Admissions Presentations and Upcoming Changes in Medical Education, 6:30 ­ 8:00 pm · Greg. of Admissions: The Medical College of Wisconsin · Kurt Hansen Asst. Dean of Admissions: UW School of Medicine

Sheridan, Jennifer

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Medical Device Interoperability  

Science Conference Proceedings (OSTI)

... The research effort includes a gap analysis of the medical device communication standard IEEE 11073 versus use case scenarios outlined in ...

2011-03-14T23:59:59.000Z

102

Large Component Removal/Disposal  

Science Conference Proceedings (OSTI)

This paper describes the removal and disposal of the large components from Maine Yankee Atomic Power Plant. The large components discussed include the three steam generators, pressurizer, and reactor pressure vessel. Two separate Exemption Requests, which included radiological characterizations, shielding evaluations, structural evaluations and transportation plans, were prepared and issued to the DOT for approval to ship these components; the first was for the three steam generators and one pressurizer, the second was for the reactor pressure vessel. Both Exemption Requests were submitted to the DOT in November 1999. The DOT approved the Exemption Requests in May and July of 2000, respectively. The steam generators and pressurizer have been removed from Maine Yankee and shipped to the processing facility. They were removed from Maine Yankee's Containment Building, loaded onto specially designed skid assemblies, transported onto two separate barges, tied down to the barges, th en shipped 2750 miles to Memphis, Tennessee for processing. The Reactor Pressure Vessel Removal Project is currently under way and scheduled to be completed by Fall of 2002. The planning, preparation and removal of these large components has required extensive efforts in planning and implementation on the part of all parties involved.

Wheeler, D. M.

2002-02-27T23:59:59.000Z

103

Multipollutant Removal with WOWClean System  

E-Print Network (OSTI)

WOW Energy built and tested its multipollutant removal WOWClean system in a development program with the Texas Commission on Environmental Quality (TCEQ). A 2,500 ACFM mobile unit was built to field test the removal of air pollution constituents from the flue gas of a power plant and demonstrate the technology. The system integrates proven emission reduction techniques into a single, multi-pollutant reduction system and is designed to remove Mercury, SOx, NOx, particulates, heavy metals and other pollutants from low temperature flue gases. Its advantages include robust operation, lower investment, lower operating cost and high removal rates. The WOWClean system has been tested on flue gases resulting from the combustion of diverse fuels such as petcoke, coal, wood, diesel and natural gas. In addition to significant removal of CO2, test results demonstrate the capability to reduce 99.5% SOx (from levels as high as 2200 ppm), 90% reduction of NOx, and > 90% heavy metals. The paper will include details of the multi-pollutant system along with test results.

Romero, M.

2010-01-01T23:59:59.000Z

104

Corium protection assembly  

DOE Patents (OSTI)

A corium protection assembly includes a perforated base grid disposed below a pressure vessel containing a nuclear reactor core and spaced vertically above a containment vessel floor to define a sump therebetween. A plurality of layers of protective blocks are disposed on the grid for protecting the containment vessel floor from the corium.

Gou, Perng-Fei (Saratoga, CA); Townsend, Harold E. (Campbell, CA); Barbanti, Giancarlo (Sirtori, IT)

1994-01-01T23:59:59.000Z

105

Vietnam HEU Removal | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Removal NNSANews posted a photo: Vietnam HEU Removal A truck carrying the last highly enriched uranium in Vietnam winds through the Vietnamese countryside. Facebook Twitter Youtube...

106

Metals removal from spent salts  

DOE Patents (OSTI)

A method and apparatus for removing metal contaminants from the spent salt of a molten salt oxidation (MSO) reactor is described. Spent salt is removed from the reactor and analyzed to determine the contaminants present and the carbonate concentration. The salt is dissolved in water, and one or more reagents may be added to precipitate the metal oxide and/or the metal as either metal oxide, metal hydroxide, or as a salt. The precipitated materials are filtered, dried and packaged for disposal as waste or can be immobilized as ceramic pellets. More than about 90% of the metals and mineral residues (ashes) present are removed by filtration. After filtration, salt solutions having a carbonate concentration >20% can be spray-dried and returned to the reactor for re-use. Salt solutions containing a carbonate concentration <20% require further clean-up using an ion exchange column, which yields salt solutions that contain less than 1.0 ppm of contaminants.

Hsu, Peter C. (Pleasanton, CA); Von Holtz, Erica H. (Livermore, CA); Hipple, David L. (Livermore, CA); Summers, Leslie J. (Livermore, CA); Brummond, William A. (Livermore, CA); Adamson, Martyn G. (Danville, CA)

2002-01-01T23:59:59.000Z

107

Actinide removal from spent salts  

DOE Patents (OSTI)

A method for removing actinide contaminants (uranium and thorium) from the spent salt of a molten salt oxidation (MSO) reactor is described. Spent salt is removed from the reactor and analyzed to determine the contaminants present and the carbonate concentration. The salt is dissolved in water, and one or more reagents are added to precipitate the thorium as thorium oxide and/or the uranium as either uranium oxide or as a diuranate salt. The precipitated materials are filtered, dried and packaged for disposal as radioactive waste. About 90% of the thorium and/or uranium present is removed by filtration. After filtration, salt solutions having a carbonate concentration >20% can be dried and returned to the reactor for re-use. Salt solutions containing a carbonate concentration <20% require further clean-up using an ion exchange column, which yields salt solutions that contain less than 0.1 ppm of thorium or uranium.

Hsu, Peter C. (Pleasanton, CA); von Holtz, Erica H. (Livermore, CA); Hipple, David L. (Livermore, CA); Summers, Leslie J. (Livermore, CA); Adamson, Martyn G. (Danville, CA)

2002-01-01T23:59:59.000Z

108

ORISE: Human Subjects Protection Resource Protection Book  

NLE Websites -- All DOE Office Websites (Extended Search)

Human Subjects Protection Resource Book Human Subjects Protection Resource Book The Human Subjects Protection Resource Book synthesizes information currently available on the protection of human subjects in research, the continuing application of such information to new areas of endeavor, and ever-changing rules, regulations, and guidance. This resource, to which the Oak Ridge Institute for Science and Education (ORISE) contributed, is for investigators, institutional review boards, research organizations, research subjects and others. The book contains chapters that provide background information on the history and development of federal regulations; chapters that discuss procedural and substantive issues regarding the review and conduct of human subjects research; and chapters that are specific to one type of research

109

Radiation Safety - Protecting the Public and the Environment | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiation Safety - Protecting the Public and the Environment Radiation Safety - Protecting the Public and the Environment Radiation Safety - Protecting the Public and the Environment The Department of Energy has a stringent program for protecting its workers, the public, and the environment from radiation. This web area has links to tools and aids for the radiation protection of the public. Some links apply to the clearance (i.e., radiological release) of property. "Clearance" permits real property (land and buildings) to be released from radiological control for reuse without radiation protection requirements. In addition, there is the clearance of personal property, such as, equipment, materials, wastes, and privately owned property (such as jewelry, clothing, tools, etc.) to be removed from radiological areas for continued use or reuse.

110

Los Alamos Lab: Radiation Protection  

NLE Websites -- All DOE Office Websites (Extended Search)

Advisor Paul Hoover Special Assistant and Issues Management Coordinator Elinor Gwynn Radiation Protection Radiation Protection The Radiation Protection Division supports the...

111

Fire Protection Program Manual  

Science Conference Proceedings (OSTI)

This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

Sharry, J A

2012-05-18T23:59:59.000Z

112

MEDICAL SCIENCES DIVISION SENIOR CLERICAL OFFICER (OXFORD MEDICAL ALUMNI)  

E-Print Network (OSTI)

1 MEDICAL SCIENCES DIVISION SENIOR CLERICAL OFFICER (OXFORD MEDICAL ALUMNI) Grade 4 , Salary. Oxford Medical Alumni exists to advance the cause of medical education by promoting the interests to establish a mutually beneficial relationship between the Medical Sciences and its alumni and to promote

Oxford, University of

113

Coatings and Protections  

Science Conference Proceedings (OSTI)

Oct 28, 2009 ... Long-term accelerated steady state microturbine testing is on-going at an elevated turbine exit temperature, and samples are removed at...

114

MEDICAL CENTRE Welfare W tch  

E-Print Network (OSTI)

UNIVERSITY MEDICAL CENTRE Welfare W tch Medical Centre Health Check Patient Participation THE RESPONSE. #12;INTRODUCTION The University Medical Centre is a GP Practice on the campus of the University Medical Centre and our practice population is made up of approximately 75% 16-24 year olds. The Medical

Derrick, John

115

UCL MEDICAL SCHOOL world class  

E-Print Network (OSTI)

UCL MEDICAL SCHOOL world class medicine in the heart of London Guide for prospective students 2012/2013 #12;Vice Provost (Health), Head of UCL School of Life and Medical Sciences and Head of UCL Medical School Professor Sir John Tooke Vice Dean, Director of Medical Education and the Division of Medical

Saunders, Mark

116

Participant's Name _______________________________ MEDICAL HISTORY AND CONSENT FOR EMERGENCY MEDICAL TREATMENT  

E-Print Network (OSTI)

Participant's Name _______________________________ MEDICAL HISTORY AND CONSENT FOR EMERGENCY MEDICAL TREATMENT Directions: Parents of minors must complete this form for program staff to provide routine health care and seek emergency medical treatment. Please answer all questions. Please type

Moore, Paul A.

117

Forecast Technical Document Felling and Removals  

E-Print Network (OSTI)

Forecast Technical Document Felling and Removals Forecasts A document describing how volume fellings and removals are handled in the 2011 Production Forecast system. Tom Jenkins Robert Matthews Ewan Mackie Lesley Halsall #12;PF2011 ­ Felling and removals forecasts Background A fellings and removals

118

Development of Medical Simulation Computer Models: Medical Ice...  

NLE Websites -- All DOE Office Websites (Extended Search)

Application in Advanced Laparoscopic Procedures Application in Emergency Response Current Research on Medical Slurry Cooling Development of Medical Simulation Computer Models...

119

MEDICAL LABORATORY SCIENCES The role of the medical laboratory  

E-Print Network (OSTI)

in Medical Laboratory Sciences and are eligible to sit for national certification examinations. Admission website, wichita.edu/chp under Medical Laboratory Sciences. The application requires a completed

120

Medical Treatment Authorization Form _____________________________________________________________________ DOB___/____/____  

E-Print Network (OSTI)

Medical Treatment Authorization Form if they are in excess of other valid and collectible insurance. 1. List any medical conditions that camp personnel): _____________________________________________________________________________________ _____________________________________________________________________________________ 2. List any medications currently taking

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

National Infrastructure Protection Plan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Infrastructure Infrastructure Protection Plan 2006 Preface Preface i The ability to protect the critical infrastructure and key resources (CI/KR) of the United States is vital to our national security, public health and safety, economic vitality, and way of life. U.S. policy focuses on the importance of enhancing CI/KR protection to ensure that essential governmental missions, public services, and economic functions are maintained in the event of a

122

ORISE: Protecting Human Subjects  

NLE Websites -- All DOE Office Websites (Extended Search)

Subjects Protecting Human Subjects The U.S. Department of Energy (DOE) Human Subjects Research Program exists to ensure that all research conducted at DOE institutions, whether...

123

Generator backup overcurrent protection  

Science Conference Proceedings (OSTI)

A concern that the characteristics and correct application of the generator backup relay are misunderstood is addressed in this report to the Power Systems Protection Committee. It is inherently a secure device, and rarely has the opportunity to operate in its intended capacity. So the question was asked, ''Do generator backup overcurrent relays really protect anything.'' In response a description of the function and operating characteristics of the backup relays, a discussion of generator fault current behavior, examples of relay settings for a typical application, and methods and criteria for determining that the relay both protects the generator and operates selectively with other protective devices are included.

Baker, D.S.

1982-11-01T23:59:59.000Z

124

PROTECTIVE CLOTHING STANDARDS  

SciTech Connect

Hanford Atomic Production Operation specification guides for protective clothing are presented. Details of this manual are given in TID-4100(Suppl.). (N.W.R.)

1963-01-01T23:59:59.000Z

125

Radiation Protection Act (Pennsylvania)  

Energy.gov (U.S. Department of Energy (DOE))

This Act combines the radiation safety provisions of The Atomic Energy Development and Radiation Control Act and the Environmental Radiation Protection Act, and empowers the Department of...

126

Surge Protection Anthology  

Science Conference Proceedings (OSTI)

... Three annexes include unpublished contributions to working groups, US patents front pages, and ... Lightning protection of roof-mounted solar cells ...

2013-05-17T23:59:59.000Z

127

Fire Protection Program Guidelines  

NLE Websites -- All DOE Office Websites (Extended Search)

Guidelines Principal Orders Related Orders Technical Standards Guidance Current fire protection requirements of the Department reside in: DOE O 420.1C, "Facility Safety", 10 CFR...

128

Chloride removal from plutonium alloy  

Science Conference Proceedings (OSTI)

SRP is evaluating a program to recover plutonium from a metallic alloy that will contain chloride salt impurities. Removal of chloride to sufficiently low levels to prevent damaging corrosion to canyon equipment is feasible as a head-end step following dissolution. Silver nitrate and mercurous nitrate were each successfully used in laboratory tests to remove chloride from simulated alloy dissolver solution containing plutonium. Levels less than 10 ppM chloride were achieved in the supernates over the precipitated and centrifuged insoluble salts. Also, less than 0.05% loss of plutonium in the +3, +4, or +6 oxidation states was incurred via precipitate carrying. These results provide impetus for further study and development of a plant-scale process to recover plutonium from metal alloy at SRP.

Holcomb, H.P.

1983-01-01T23:59:59.000Z

129

Retiree Medical Insurance for 2014  

NLE Websites -- All DOE Office Websites (Extended Search)

Plans Retiree Medical Insurance for 2014 Blue Cross Blue Shield of New Mexico (BCBSNM) is the provider of medical benefits. Contact Retiree Insurance Providers For the 2014...

130

Removing Barriers to Interdisciplinary Research  

E-Print Network (OSTI)

A significant amount of high-impact contemporary scientific research occurs where biology, computer science, engineering and chemistry converge. Although programmes have been put in place to support such work, the complex dynamics of interdisciplinarity are still poorly understood. In this paper we interrogate the nature of interdisciplinary research and how we might measure its "success", identify potential barriers to its implementation, and suggest possible mechanisms for removing these impediments.

Naomi Jacobs; Martyn Amos

2010-12-19T23:59:59.000Z

131

METHOD OF REMOVING STRONTIUM IONS  

DOE Patents (OSTI)

A method is given for removing trace amounts of Sr/sup 90/ from solutions. Phosphate ion is added to the solution and it is then brought into contact with a solid salt such as calcium carbonate which will react methathetically with the phosphate ion to form a salt such as calcium phosphate. During this reaction, strontium will be absorbed to a high degree within the newly formed lattice. (AEC)

Rhodes, D.W.; McHenry, J.R.; Ames, L.L. Jr.

1962-05-01T23:59:59.000Z

132

Contractor Employee Pension medical benifits | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contractor Employee Pension medical benifits Contractor Employee Pension medical benifits Contractor Employee Pension medical benifits, FRComment5820071.pdf Contractor Employee...

133

TEPP-Medical Messages | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TEPP-Medical Messages TEPP-Medical Messages Medical Messages Index Medical Messages More Documents & Publications TEPP - Exercise Evaluation Forms Transuranic Waste Tabletop...

134

TEPP-Medical Messages | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TEPP-Medical Messages TEPP-Medical Messages Medical Messages Index Medical Messages More Documents & Publications TEPP Training Brochure 508 Compliant Version - TEPP Training...

135

UW Medicine Harborview Medical Center UW Medical Center  

E-Print Network (OSTI)

PT.NO NAME DOB UW Medicine Harborview Medical Center ­ UW Medical Center Northwest Hospital & Medical Center ­ University of Washington Physicians Seattle, Washington REQUEST AMENDMENT OF MED RECORD *U2078* *U2078* WHITE ­ MEDICAL RECORD UH2078 REV JUN 12 CANARY - PATIENT Request for Correction

Borenstein, Elhanan

136

Medical Device Interoperability The lack of interoperability between medical devices  

E-Print Network (OSTI)

Medical Device Interoperability The lack of interoperability between medical devices can lead to preventable medical errors and potentially serious inefficiencies that could otherwise be avoided. Overview an accurate diagnostic and treatment discipline, medical devices are playing an ever-increasing role

137

DOD MEDICAL EXAMINATION REVIEW BOARD (DODMERB) REPORT OF MEDICAL HISTORY  

E-Print Network (OSTI)

DOD MEDICAL EXAMINATION REVIEW BOARD (DODMERB) REPORT OF MEDICAL HISTORY (This information is for official and medically confidential use only and will not be released to unauthorized persons.) SECTION I in the REMARKS section. Mark and explain each item to the best of your ability. Be perfectly honest! Your medical

de Lijser, Peter

138

Environmental Protection Implementation Plan  

SciTech Connect

This Environmental Protection Implementation Plan is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. The Environmental Protection Implementation Plan serves as an aid to management and staff to implement new environmental programs in a timely manner.

Brekke, D.D.

1994-01-01T23:59:59.000Z

139

CRC Handbook of Medical Physics, vol 2  

Science Conference Proceedings (OSTI)

In this work, the care and testing of measurement and diagnostic instruments are described in detail. Difficulties encountered with therapeutic and diagnostic calibrations are explored and solutions are suggested. VOLUME II: Nuclear Medicine Imaging Instrumentation. Physics Principles of Computer Tomography. Diagnostic Ultrasound-Physical Principles and Equipment. Electroradiography (Xeroradiography) - Equipment and Initial Acceptance Tests. Purchasing Diagnostic X-Ray Equipment and Initial Acceptance Tests. Measurement of Modulation Transfer Functions. Measurement of Image Noise. Practical Sensitometry in Medical Imaging. Quality Assurance in Diagnostic Radiology. Quality Control Procedures for Nuclear Medicine Instruments. Computers in Nuclear Medicine. Quality Assurance and Radiation Exposure Levels in Computer Tomography. Room Design and Radiation Protection Surveys for Radionuclides and Megavoltage Electron Accelerators. Room Design and Radiation Protection Surveys for Diagnostic and Orthovoltage X-ray Units. Effects of Ionizing Radiations on Humans. In Vivo Dosimetry of Beta and Gamma-Emitting Radiopharmaceuticals. Patient Dosimetry in Diagnostic Radiology. Index.

Waggener, R.G.; Kereiakes, J.G.; Shalek, R.J.

1984-01-01T23:59:59.000Z

140

ORISE: Human Subjects Protection  

NLE Websites -- All DOE Office Websites (Extended Search)

Human Subjects Protection Human Subjects Protection The Oak Ridge Institute for Science and Education (ORISE) performs technical assessments to assist U.S. Department of Energy (DOE) laboratories involved in human subjects research projects. Under DOE Order and Policy 443.1A, Protection of Human Subjects, and 10 CFR 745, DOE employees and contractors are expected to protect the rights and welfare of human research subjects. In support of the DOE Office of Science and the Human Subjects Protection Program (HSPP), ORISE has most recently assisted with the development and distribution of tools to address classified research and to track potential human social cultural behavior systems (HSCB) research conducted by DOE laboratories. Examples of products that ORISE has developed in support of the HSPP

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Notices ENVIRONMENTAL PROTECTION AGENCY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

25 Federal Register 25 Federal Register / Vol. 76, No. 209 / Friday, October 28, 2011 / Notices ENVIRONMENTAL PROTECTION AGENCY [FRL-9484-2] Children's Health Protection Advisory Committee (CHPAC); Notice of Charter Renewal AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Charter Renewal. Notice is hereby given that the Environmental Protection Agency (EPA) has determined that, in accordance with the provisions of the Federal Advisory Committee Act (FACA), 5 U.S.C. App.2. The Children's Health Protection Advisory Committee (CHPAC) is a necessary committee which is in the public interest. Accordingly, CHPAC will be renewed for an additional two- year period. The purpose of CHPAC is to provide advice and recommendations to the Administrator of EPA on issues

142

DOE Issues Request for Proposals for Hanford Site Occupational Medical Services  

Energy.gov (U.S. Department of Energy (DOE))

RICHLAND, Wash. The Department of Energy (DOE) today issued a Request for Proposals (RFP) for an Occupational Medical Services contract at the Hanford Site. The solicitation is for a small-business contractor to perform occupational medical services for the DOE Richland Operations Office and Office of River Protection.

143

MEDICAL IMAGE CONVERSION Peter Stanchev  

E-Print Network (OSTI)

MEDICAL IMAGE CONVERSION Peter Stanchev Institute of Mathematics, Bulgarian Academy of Sciences with the problem of converting medical images from one format to another. In solving it the structure of the most commonly used medical image formats are studied and analysed. A mechanism for medical image file conversion

Stanchev, Peter

144

The Farmer's Conundrum: Income from Biofuels or Protect the Soil? |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Farmer's Conundrum: Income from Biofuels or Protect the Soil? The Farmer's Conundrum: Income from Biofuels or Protect the Soil? The Farmer's Conundrum: Income from Biofuels or Protect the Soil? July 1, 2010 - 11:39am Addthis Lindsay Gsell After a harvest is over, crops can be sold, shipped, canned or consumed. But what happens to the parts of the crops that are inedible-the corn stover, stalks or cobs? Selling crop residues for bioenergy could provide farmers with an extra source of income. Yet, leaving some residue on the fields helps reduce soil erosion and maintain healthy levels of soil carbon and other nutrients. So how can land managers find this balance? Idaho National Laboratory (INL) is developing the Residue Removal Tool -- new software designed to simulate sustainability criteria -- to help find this balance of what to remove and what to leave behind. The software will

145

Protected Loss of Flow Transient Simulation (Quicktime format, High  

NLE Websites -- All DOE Office Websites (Extended Search)

Engineering Analysis > Videos Engineering Analysis > Videos Engineering Analysis: Protected Loss of Flow Transient Simulation Quicktime format Quicktime Format - High Bandwidth | Size: 25.94 MB | Bit Rate: 1148 kbps Keywords: flow transient, plot, EBR-II, SAS4A, SASSYS-1, passive safety, protected loss of flow, PLOF, shutdown heat removal test, SHRT-17, SHRT17 Elevation plot showing detailed top of core temperatures in experimental assembly XX09 during a protected loss of flow transient in EBR-II. Surrounding assemblies are depicted using fuel average temperatures. Results show excellent decay heat removal capability of sodium through natural circulation and exceptionally low transient temperatures with metallic fuel. :: Please wait until video loads completely :: Closed Captioning Transcript

146

Acceptance test procedure for removal of CS1K circuit switcher block and trip schemes  

Science Conference Proceedings (OSTI)

This supporting document provides a detailed process to test the functions of the circuit switcher, protective relays, alarms, SCADA and 125VDC control logic of 115kV and 13.8kV systems at B3S4 substation following the removal of trip and blocking schemes to Transformer No.1 Circuit Switcher B594.

HACHE, J.M.

1999-08-25T23:59:59.000Z

147

Natural gas: Removing the obstacles  

Science Conference Proceedings (OSTI)

Defining and then figuring out how to remove whatever obstacles may be blocking the wider use of natural gas was the purpose of a conference held early last month in Phoenix, Arizona. The unique, three-day event was jointly sponsored by the U.S. Department of Energy (DOE) and the National Association of Regulatory Utility Commissioners (NARUC). It drew an overflow crowd of more than 500, with a registration list that read like a Who's Who of the natural gas industry. This article summarizes some of the main points of this conference.

Romo, C.

1992-03-15T23:59:59.000Z

148

Material Removal and Disposition | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Removal and Disposition | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

149

THE MIGRATION MECHANISM OF RADIATION PROTECTION  

SciTech Connect

An hypothesis concerning the primary mechanism of the biological action of radiation is presented. The energy absorbed either directly or indirectly on irradiation is assumed to damage the system in the course of migrating either within or between the protein or other macromolecules. Some of the damage responsible for the physio-chemical radiation after-effects is retained in ihe macromolecules as long-lived electronically excited states. It does not escape and in time produces additional effects. It is suggested thai this damage can be removed by intermolecular energy migration to some protective agent which forms a complex with the macromolecules. (C.H.)

Eidus, L.Kh.; Kalamkarova, M.B.; Otarova, G.K.

1958-01-01T23:59:59.000Z

150

Office of River Protection (ORP) and Washingotn River Protection Solutions,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of River Protection (ORP) and Washingotn River Protection Office of River Protection (ORP) and Washingotn River Protection Solutions, LLC (WRPS) Partnering Agreement for the DOE-EM Tank Operations Project Office of River Protection (ORP) and Washingotn River Protection Solutions, LLC (WRPS) Partnering Agreement for the DOE-EM Tank Operations Project The Mission of the Office of River Protection is to safely retrieve and treat Hanford's tank waste and close the Tank Farms to protect the Columbia River. Office of River Protection (ORP) and Washingotn River Protection Solutions, LLC (WRPS) Partnering Agreement for the DOE-EM Tank Operations Project More Documents & Publications 2011 Annual Workforce Analysis and Staffing Plan Report - Office of River Protection Consent Order, Washington River Protection Solutions, LLC - NCO-2011-01

151

Fire Protection Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Program Fire Protection Overview The Department of Energy (DOE) Fire Protection Program is multi-faceted. It includes published fire safety directives (Orders, standards, and guidance documents), a range of oversight activities, an annual fire protection program summary, and a directory of fire safety professionals. DOE also sponsors fire safety conferences, various training initiatives, and a spectrum of technical assistance activities. This Home Page is intended to bring together in one location as much of the Program's resources as possible to facilitate greater understanding, communication, and efficiency of operations. Guidelines -- NFPA Codes and standards, CFRs, and DOE Directives (policy statements, Orders, Standards, and Guidance Documents)

152

Coordinating overcurrent protection devices  

Science Conference Proceedings (OSTI)

Distribution, substation, and plant engineers can benefit from using an overcurrent protection program in commercial, industrial, and utility applications to aid in clearing temporary faults and isolating permanent faults. In the time it normally takes to check one coordination scheme manually, dozens of alternatives can be evaluated using a graphics-oriented program, because the engineer receives immediate feedback for quick decision-making. It is well known that accurately coordinating overcurrent protection devices can minimize or prevent equipment damage, and electrical power service to customers can be greatly improved. In addition to assisting experienced engineers, an overcurrent protection program is an excellent training tool for new engineers.

St. John, M.; Borgnino, A.

1996-07-01T23:59:59.000Z

153

Medical imaging systems  

Science Conference Proceedings (OSTI)

A medical imaging system provides simultaneous rendering of visible light and diagnostic or functional images. The system may be portable, and may include adapters for connecting various light sources and cameras in open surgical environments or laparascopic or endoscopic environments. A user interface provides control over the functionality of the integrated imaging system. In one embodiment, the system provides a tool for surgical pathology.

Frangioni, John V

2013-06-25T23:59:59.000Z

154

Medical School Biomedical Waste  

E-Print Network (OSTI)

Medical School Biomedical Waste Labware, gloves, pipets, pipet tips Stock cultures, bacterial with or without needles, razor blades, scalpel blades) Key: Pathological waste BL1 & BL2 waste (low risk ­ LR) BL2 waste (moderate risk - MR)/BL3 waste Blood Blood Autoclave Needle box Metal Cart Must either bleach

Cooley, Lynn

155

Jackson Park Hospital Green Building Medical Center  

SciTech Connect

Jackson Park Hospital completed the construction of a new Medical Office Building on its campus this spring. The new building construction has adopted the City of Chicago's recent focus on protecting the environment, and conserving energy and resources, with the introduction of green building codes. Located in a poor, inner city neighborhood on the South side of Chicago, Jackson Park Hospital has chosen green building strategies to help make the area a better place to live and work. The new green building houses the hospital's Family Medicine Residency Program and Specialty Medical Offices. The residency program has been vital in attracting new, young physicians to this medically underserved area. The new outpatient center will also help to allure needed medical providers to the community. The facility also has areas designated to women's health and community education. The Community Education Conference Room will provide learning opportunities to area residents. Emphasis will be placed on conserving resources and protecting our environment, as well as providing information on healthcare access and preventive medicine. The new Medical Office Building was constructed with numerous energy saving features. The exterior cladding of the building is an innovative, locally-manufactured precast concrete panel system with integral insulation that achieves an R-value in excess of building code requirements. The roof is a 'green roof' covered by native plantings, lessening the impact solar heat gain on the building, and reducing air conditioning requirements. The windows are low-E, tinted, and insulated to reduce cooling requirements in summer and heating requirements in winter. The main entrance has an air lock to prevent unconditioned air from entering the building and impacting interior air temperatures. Since much of the traffic in and out of the office building comes from the adjacent Jackson Park Hospital, a pedestrian bridge connects the two buildings, further decreasing the amount of unconditioned air that enters the office building. The HVAC system has an Energy Efficiency Rating 29% greater than required. No CFC based refrigerants were used in the HVAC system, thus reducing the emission of compounds that contribute to ozone depletion and global warming. In addition, interior light fixtures employ the latest energy-efficient lamp and ballast technology. Interior lighting throughout the building is operated by sensors that will automatically turn off lights inside a room when the room is unoccupied. The electrical traction elevators use less energy than typical elevators, and they are made of 95% recycled material. Further, locally manufactured products were used throughout, minimizing the amount of energy required to construct this building. The primary objective was to construct a 30,000 square foot medical office building on the Jackson Park Hospital campus that would comply with newly adopted City of Chicago green building codes focusing on protecting the environment and conserving energy and resources. The energy saving systems demonstrate a state of the-art whole-building approach to energy efficient design and construction. The energy efficiency and green aspects of the building contribute to the community by emphasizing the environmental and economic benefits of conserving resources. The building highlights the integration of Chicago's new green building codes into a poor, inner city neighborhood project and it is designed to attract medical providers and physicians to a medically underserved area.

William Dorsey; Nelson Vasquez

2010-03-31T23:59:59.000Z

156

Jackson Park Hospital Green Building Medical Center  

SciTech Connect

Jackson Park Hospital completed the construction of a new Medical Office Building on its campus this spring. The new building construction has adopted the City of Chicago's recent focus on protecting the environment, and conserving energy and resources, with the introduction of green building codes. Located in a poor, inner city neighborhood on the South side of Chicago, Jackson Park Hospital has chosen green building strategies to help make the area a better place to live and work. The new green building houses the hospital's Family Medicine Residency Program and Specialty Medical Offices. The residency program has been vital in attracting new, young physicians to this medically underserved area. The new outpatient center will also help to allure needed medical providers to the community. The facility also has areas designated to women's health and community education. The Community Education Conference Room will provide learning opportunities to area residents. Emphasis will be placed on conserving resources and protecting our environment, as well as providing information on healthcare access and preventive medicine. The new Medical Office Building was constructed with numerous energy saving features. The exterior cladding of the building is an innovative, locally-manufactured precast concrete panel system with integral insulation that achieves an R-value in excess of building code requirements. The roof is a 'green roof' covered by native plantings, lessening the impact solar heat gain on the building, and reducing air conditioning requirements. The windows are low-E, tinted, and insulated to reduce cooling requirements in summer and heating requirements in winter. The main entrance has an air lock to prevent unconditioned air from entering the building and impacting interior air temperatures. Since much of the traffic in and out of the office building comes from the adjacent Jackson Park Hospital, a pedestrian bridge connects the two buildings, further decreasing the amount of unconditioned air that enters the office building. The HVAC system has an Energy Efficiency Rating 29% greater than required. No CFC based refrigerants were used in the HVAC system, thus reducing the emission of compounds that contribute to ozone depletion and global warming. In addition, interior light fixtures employ the latest energy-efficient lamp and ballast technology. Interior lighting throughout the building is operated by sensors that will automatically turn off lights inside a room when the room is unoccupied. The electrical traction elevators use less energy than typical elevators, and they are made of 95% recycled material. Further, locally manufactured products were used throughout, minimizing the amount of energy required to construct this building. The primary objective was to construct a 30,000 square foot medical office building on the Jackson Park Hospital campus that would comply with newly adopted City of Chicago green building codes focusing on protecting the environment and conserving energy and resources. The energy saving systems demonstrate a state of the-art whole-building approach to energy efficient design and construction. The energy efficiency and green aspects of the building contribute to the community by emphasizing the environmental and economic benefits of conserving resources. The building highlights the integration of Chicago's new green building codes into a poor, inner city neighborhood project and it is designed to attract medical providers and physicians to a medically underserved area.

William Dorsey; Nelson Vasquez

2010-03-31T23:59:59.000Z

157

Bird Protection in Illinois  

NLE Websites -- All DOE Office Websites (Extended Search)

Protection in Illinois Protection in Illinois Nature Bulletin No. 550-A January 18, 1975 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation BIRD PROTECTION IN ILLINOIS Very few people are indifferent about birds. Almost every bird is the feathered friend of somebody or some organization ready to do battle in its behalf. At present, in Illinois, songbirds and most other wild birds, together with their nests and eggs, are completely protected by law at all times. A few kinds, called game birds, may be shot by hunters -- pheasants and quail, also migratory ducks, geese, coots, jacksnipes, woodcocks, and doves. Such hunting must be done with shotguns in certain places in certain open seasons with many other detailed restrictions. Now, even crow hunters are licensed. The only unprotected birds are those three immigrants or exotics: the English sparrow, the European starling and the "domestic " pigeon. These, too, have their friends .

158

Potline Open Circuit Protection  

Science Conference Proceedings (OSTI)

It results in a high power arc, which feeds oneself as the DC current is not cut. ... To reduce the risk, the potline and the substation must be protected against the...

159

Mondriaan memory protection  

E-Print Network (OSTI)

Reliability and security are quickly becoming users' biggest concern due to the increasing reliance on computers in all areas of society. Hardware-enforced, fine-grained memory protection can increase the reliability and ...

Witchel, Emmett Jethro, 1970-

2004-01-01T23:59:59.000Z

160

Fish Protection Technology Manual  

Science Conference Proceedings (OSTI)

This report provides an updated review of the state of knowledge on fish protection technologies for use at power plant cooling water intake structures (CWISs) to meet requirements of 316(b) of the Clean Water Act (CWA). While it is not possible to know with certainty how the 316(b) Final Rule will look (it is scheduled to be issued on or before June 27, 2013), it is anticipated that power generating facilities will have some flexibility in selecting fish protection technologies. The ...

2013-02-12T23:59:59.000Z

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Environmental protection Implementation Plan  

SciTech Connect

This ``Environmental Protection Implementation Plan'' is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. This document states SNL/California's commitment to conduct its operations in an environmentally safe and responsible manner. The ``Environmental Protection Implementation Plan'' helps management and staff comply with applicable environmental responsibilities.

R. C. Holland

1999-12-01T23:59:59.000Z

162

Cultural (Historical) Resource Management, Environmental Protection  

NLE Websites -- All DOE Office Websites (Extended Search)

History Homepage History Homepage Accelerators & Detectors Cosmotron AGS Strong-focusing 80" Bubble Chamber The omega-minus 7' Bubble Chamber The charmed baryon NSLS RHIC Reactors Graphite Research Reactor High Flux Beam Reactor Medical Research Reactor Life Sciences Medical breakthroughs Biology research Plant Genetics Other BNL Nobel Prizes The First Video Game? BNL Physics Timeline Camp Upton Historic Images BNL Cultural (Historical) Resource Management Cultural (Historical) Resource Management at Brookhaven National Laboratory Photograph of the remains of WWI training trenches The Environmental Protection Division is responsible for ensuring compliance with historic preservation requirements. The BNL Cultural Resource Management Plan identifies and describes the management plans for of all of BNL's cultural resources. These resources include World War I trenches, Civilian Conservation Corps features, World War II buildings, and historic structures, programs and discoveries associated with high energy physics, research reactors, and other science conducted at the Laboratory.

163

Microbially derived crop protection products  

E-Print Network (OSTI)

of the Project: Microbially derived crop protection productstransferred into major crop plants. Following greenhouseMicrobial Diversity-Based Novel Crop Protection Products " A

Torok, Tamas

2010-01-01T23:59:59.000Z

164

THERMALLY SHIELDED MOISTURE REMOVAL DEVICE  

DOE Patents (OSTI)

An apparatus is presented for removing moisture from the air within tanks by condensation upon a cartridge containing liquid air. An insulating shell made in two halves covers the cartridge within the evacuated system. The shell halves are hinged together and are operated by a system of levers from outside the tank with the motion translated through a sylphon bellows to cover and uncover the cartridge. When the condensation of moisture is in process, the insulative shell is moved away from the liquid air cartridge, and during that part of the process when there is no freezing out of moisture, the shell halves are closed on the cell so thnt the accumulated frost is not evaporated. This insulating shell greatly reduces the consumption of liquid air in this condensation process.

Miller, O.E.

1958-08-26T23:59:59.000Z

165

Melter Glass Removal and Dismantlement  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy (DOE) has been using vitrification processes to convert high-level radioactive waste forms into a stable glass for disposal in waste repositories. Vitrification facilities at the Savannah River Site (SRS) and at the West Valley Demonstration Project (WVDP) are converting liquid high-level waste (HLW) by combining it with a glass-forming media to form a borosilicate glass, which will ensure safe long-term storage. Large, slurry fed melters, which are used for this process, were anticipated to have a finite life (on the order of two to three years) at which time they would have to be replaced using remote methods because of the high radiation fields. In actuality the melters useable life spans have, to date, exceeded original life-span estimates. Initial plans called for the removal of failed melters by placing the melter assembly into a container and storing the assembly in a concrete vault on the vitrification plant site pending size-reduction, segregation, containerization, and shipment to appropriate storage facilities. Separate facilities for the processing of the failed melters currently do not exist. Options for handling these melters include (1) locating a facility to conduct the size-reduction, characterization, and containerization as originally planned; (2) long-term storing or disposing of the complete melter assembly; and (3) attempting to refurbish the melter and to reuse the melter assembly. The focus of this report is to look at methods and issues pertinent to size-reduction and/or melter refurbishment in particular, removing the glass as a part of a refurbishment or to reduce contamination levels (thus allowing for disposal of a greater proportion of the melter as low level waste).

Richardson, BS

2000-10-31T23:59:59.000Z

166

Nitrogen removal from natural gas  

SciTech Connect

According to a 1991 Energy Information Administration estimate, U.S. reserves of natural gas are about 165 trillion cubic feet (TCF). To meet the long-term demand for natural gas, new gas fields from these reserves will have to be developed. Gas Research Institute studies reveal that 14% (or about 19 TCF) of known reserves in the United States are subquality due to high nitrogen content. Nitrogen-contaminated natural gas has a low Btu value and must be upgraded by removing the nitrogen. In response to the problem, the Department of Energy is seeking innovative, efficient nitrogen-removal methods. Membrane processes have been considered for natural gas denitrogenation. The challenge, not yet overcome, is to develop membranes with the required nitrogen/methane separation characteristics. Our calculations show that a methane-permeable membrane with a methane/nitrogen selectivity of 4 to 6 would make denitrogenation by a membrane process viable. The objective of Phase I of this project was to show that membranes with this target selectivity can be developed, and that the economics of the process based on these membranes would be competitive. Gas permeation measurements with membranes prepared from two rubbery polymers and a superglassy polymer showed that two of these materials had the target selectivity of 4 to 6 when operated at temperatures below - 20{degrees}C. An economic analysis showed that a process based on these membranes is competitive with other technologies for small streams containing less than 10% nitrogen. Hybrid designs combining membranes with other technologies are suitable for high-flow, higher-nitrogen-content streams.

1997-04-01T23:59:59.000Z

167

Medical Radioisotope | Nuclear Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Medical Medical Radioisotope SHARE Medical Radioisotope Staff members preparing Ac-225 in glove boxes for shipment to hospitals to support radiotherapy cancer clinical trials in multiple locations around the world. ORNL's Medical Radioisotope Program is focused on the development of improved reactor production and processing methods to provide medical radioisotopes, the development of new radionuclide generator systems, the design and evaluation of new radiopharmaceuticals for applications in nuclear medicine and oncology, and association with Medical Cooperative Programs throughout the world for further preclinical testing and clinical evaluation of agents developed at ORNL. The collective resources of ORNL, including access to the enriched stable isotope inventory, a High Flux

168

Medical Screening Former Worker Medical Screening Program (FWP)  

Energy.gov (U.S. Department of Energy (DOE))

Medical Screening: Provide medical screening exams that are designed to check for health conditions related to occupational exposures to former workers who choose to participate in the program, including a re-screen exam every three years.

169

Former Worker Medical Screening Program  

Energy.gov (U.S. Department of Energy (DOE))

The Former Worker Medical Screening Program (FWP) provides ongoing medical screening examinations, at no cost, to all former DOE Federal, contractor, and subcontractor workers who may be at risk for occupational diseases.

170

Rack Protection Monitor  

DOE Patents (OSTI)

A hardwired, fail-safe rack protection monitor utilizes electromechanical relays to respond to the detection by condition sensors of abnormal or alarm conditions (such as smoke, temperature, wind or water) that might adversely affect or damage equipment being protected. When the monitor is reset, the monitor is in a detection mode with first and second alarm relay coils energized. If one of the condition sensors detects an abnormal condition, the first alarm relay coil will be de-energized, but the second alarm relay coil will remain energized. This results in both a visual and an audible alarm being activated. If a second alarm condition is detected by another one of the condition sensors while the first condition sensor is still detecting the first alarm condition, both the first alarm relay coil and the second alarm relay coil will be de-energized. With both the first and second alarm relay coils de-energized, both a visual and an audible alarm will be activated. In addition, power to the protected equipment will be terminated and an alarm signal will be transmitted to an alarm central control. The monitor can be housed in a separate enclosure so as to provide an interface between a power supply for the protected equipment and the protected equipment.

Orr, Stanley G.

1998-10-21T23:59:59.000Z

171

Rack protection monitor  

DOE Patents (OSTI)

A hardwired, fail-safe rack protection monitor utilizes electromechanical relays to respond to the detection by condition sensors of abnormal or alarm conditions (such as smoke, temperature, wind or water) that might adversely affect or damage equipment being protected. When the monitor is reset, the monitor is in a detection mode with first and second alarm relay coils energized. If one of the condition sensors detects an abnormal condition, the first alarm relay coil will be de-energized, but the second alarm relay coil will remain energized. This results in both a visual and an audible alarm being activated. If a second alarm condition is detected by another one of the condition sensors while the first condition sensor is still detecting the first alarm condition, both the first alarm relay coil and the second alarm relay coil will be de-energized. With both the first and second alarm relay coils de-energized, both a visual and an audible alarm will be activated. In addition, power to the protected equipment will be terminated and an alarm signal will be transmitted to an alarm central control. The monitor can be housed in a separate enclosure so as to provide an interface between a power supply for the protected equipment and the protected equipment.

Orr, Stanley G. (Wheaton, IL)

2000-01-01T23:59:59.000Z

172

Medical Devices Metrology and Standards  

Science Conference Proceedings (OSTI)

... Medical Devices Metrology and Standards Needs (Download the flyer in pdf ... Standard and Metrology Needs for Surgical Robotics, presented by ...

2013-07-18T23:59:59.000Z

173

Critical Foundations: Protecting America's Infrastructures  

Science Conference Proceedings (OSTI)

Page 1. CRITICAL FOUNDATIONS PROTECTING AMERICA'S INFRASTRUCTURES The Report of the President's Commission ...

174

River Protection.PDF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

cc: cc: DOE/IG-0506 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS I N S P E C T I O N O F SELECTED ASPECTS OF THE OFFICE OF RIVER PROTECTION PERFORMANCE-BASED INCENTIVE PROGRAM JUNE 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 June 14, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Inspection of Selected Aspects of the Office of River Protection Performance-Based Incentive Program" BACKGROUND The Office of River Protection (ORP), which reports to the Office of Environmental Management, is responsible for remediation of the radioactive waste stored in tanks at the Hanford Site in the State of Washington. For Fiscal Year (FY) 2000, ORP established 26 performance-based contract

175

Notices ENVIRONMENTAL PROTECTION AGENCY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

076 Federal Register 076 Federal Register / Vol. 77, No. 250 / Monday, December 31, 2012 / Notices ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9006-8] Notice of Intent: Designation of an Expanded Ocean Dredged Material Disposal Site (ODMDS) off Charleston, South Carolina AGENCY: U.S. Environmental Protection Agency (EPA) Region 4. ACTION: Notice of Intent to prepare an Environmental Assessment (EA) for the designation of an expanded ODMDS off Charleston, South Carolina. Purpose: EPA has the authority to designate ODMDSs under Section 102 of the Marine Protection, Research and Sanctuaries Act of 1972 (33 U.S.C. 1401 et seq.). It is EPA's policy to prepare a National Environmental Policy Document for all ODMDS designations (63 FR 58045, October 1998). FOR FURTHER INFORMATION, TO

176

Notices ENVIRONMENTAL PROTECTION AGENCY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

22 Federal Register 22 Federal Register / Vol. 75, No. 103 / Friday, May 28, 2010 / Notices ENVIRONMENTAL PROTECTION AGENCY [FRL-9156-1] Office of Research and Development; Ambient Air Monitoring Reference and Equivalent Methods: Designation of One New Equivalent Method AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of one new equivalent method for monitoring ambient air quality. SUMMARY: Notice is hereby given that the Environmental Protection Agency (EPA) has designated, in accordance with 40 CFR Part 53, one new equivalent method for measuring concentrations of lead (Pb) in total suspended particulate matter (TSP) in the ambient air. FOR FURTHER INFORMATION CONTACT: Surender Kaushik, Human Exposure and Atmospheric Sciences Division (MD-D205-03), National Exposure

177

Microscope collision protection apparatus  

DOE Patents (OSTI)

A microscope collision protection apparatus for a remote control microscope which protects the optical and associated components from damage in the event of an uncontrolled collision with a specimen, regardless of the specimen size or shape. In a preferred embodiment, the apparatus includes a counterbalanced slide for mounting the microscope's optical components. This slide replaces the rigid mounts on conventional upright microscopes with a precision ball bearing slide. As the specimen contacts an optical component, the contacting force will move the slide and the optical components mounted thereon. This movement will protect the optical and associated components from damage as the movement causes a limit switch to be actuated, thereby stopping all motors responsible for the collision.

DeNure, Charles R. (Pocatello, ID)

2001-10-23T23:59:59.000Z

178

Part 3: Removal Action | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Removal Action 3: Removal Action Part 3: Removal Action Question: When may removal actions be initiated? Answer: Removal actions may be initiated when DOE determines that the action will prevent, minimize, stabilize, or eliminate a risk to health or the environment. The NCP specifies that the determination that a risk to health or the environment is appropriate for removal action should be based on: actual or potential exposure of humans, animals, or the food chain the presence of contained hazardous substances that pose a threat of release the threat of migration of the hazardous substances the threat of fire or explosion the availability of an appropriate Federal or State response capability [section 300.415(b)(2)]. In essence, where DOE identifies a threat of exposure to or migration of

179

Removal of metal ions from aqueous solution  

DOE Patents (OSTI)

A method of removing heavy metals from aqueous solution, a composition of matter used in effecting said removal, and apparatus used in effecting said removal. One or more of the polypeptides, poly ({gamma}-glutamylcysteinyl)glycines, is immobilized on an inert material in particulate form. Upon contact with an aqueous solution containing heavy metals, the polypeptides sequester the metals, removing them from the solution. There is selectivity of poly ({gamma}-glutamylcysteinyl)glycines having a particular number of monomer repeat units for particular metals. The polypeptides are easily regenerated by contact with a small amount of an organic acid, so that they can be used again to remove heavy metals from solution. This also results in the removal of the metals from the column in a concentrated form.

Jackson, P.J.; Delhaize, E.; Robinson, N.J.; Unkefer, C.J.; Furlong, C.

1988-08-26T23:59:59.000Z

180

Removal of metal ions from aqueous solution  

DOE Patents (OSTI)

A method of removing heavy metals from aqueous solution, a composition of matter used in effecting said removal, and apparatus used in effecting said removal. One or more of the polypeptides, poly (.gamma.-glutamylcysteinyl)glycines, is immobilized on an inert material in particulate form. Upon contact with an aqueous solution containing heavy metals, the polypeptides sequester the metals, removing them from the solution. There is selectivity of poly (.gamma.-glutamylcysteinyl)glycines having a particular number of monomer repeat units for particular metals. The polypeptides are easily regenerated by contact with a small amount of an organic acid, so that they can be used again to remove heavy metals from solution. This also results in the removal of the metals from the column in a concentrated form.

Jackson, Paul J. (Los Alamos, NM); Delhaize, Emmanuel (Los Alamos, NM); Robinson, Nigel J. (Durham, GB2); Unkefer, Clifford J. (Los Alamos, NM); Furlong, Clement (Seattle, WA)

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Removal of metal ions from aqueous solution  

DOE Patents (OSTI)

A method of removing heavy metals from aqueous solution, a composition of matter used in effecting said removal, and apparatus used in effecting said removal. One or more of the polypeptides, poly (.gamma.-glutamylcysteinyl)glycines, is immobilized on an inert material in particulate form. Upon contact with an aqueous solution containing heavy metals, the polypeptides sequester the metals, removing them from the solution. There is selectivity of poly (.gamma.-glutamylcysteinyl)glycines having a particular number of monomer repeat unit for particular metals. The polypeptides are easily regenerated by contact with a small amount of an organic acid, so that they can be used again to remove heayv metals from solution. This also results in the removal of the metals from the column in a concentrated form.

Jackson, Paul J. (both Los Alamos, NM); Delhaize, Emmanuel (both Los Alamos, NM); Robinson, Nigel J. (Durham, GB2); Unkefer, Clifford J. (Los Alamos, NM); Furlong, Clement (Seattle, WA)

1990-11-13T23:59:59.000Z

182

Medical History Questionnaire This form is voluntary. You may ignore it, complete parts of it, or fill it out fully. It is intended solely for  

E-Print Network (OSTI)

Medical History Questionnaire This form is voluntary. You may ignore it, complete parts of it, or fill it out fully. It is intended solely for your self-protection at sea, by making your medical history available for reference at Medical Advisory Systems/ MedAire, 80 E. Salado Parkway, Suite 610

Russell, Lynn

183

Environmental Protection Division  

NLE Websites -- All DOE Office Websites (Extended Search)

Site Details Site Details EPD Home Staff List (pdf) Org Chart (pdf) Compliance / Permits Programs Other Information Land Use & Institutional Controls Mapping Site Environmental Reports Environmental Monitoring Plan (EMP) Spill Response BNL Site Index Can't View PDFs? Developing Environmental Products and Services for Brookhaven Stakeholders The Environmental Protection Division (EPD) develops and delivers environmental products and services for all Brookhaven stakeholders. We manage environmental programs such as pollution prevention, groundwater protection, and natural resource management; provide technical assistance on environmental requirements; maintain the Laboratory's IS0 14001-registered Environmental Management System; prepare environmental permit applications; conduct environmental monitoring; manage data

184

Environmental Protection Implementation Plan  

SciTech Connect

This Environmental Protection Implementation Plan is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. This document states SNL/California`s commitment to conduct its operations in an environmentally safe and responsible manner. The Environmental Protection Implementation Plan helps management and staff comply with applicable environmental responsibilities. This report focuses on the following: notification of environmental occurrences; general planning and reporting; special programs and plans; environmental monitoring program; and quality assurance and data verification.

Brekke, D.D.

1995-11-01T23:59:59.000Z

185

Environmental protection implementation plan  

SciTech Connect

This Environmental Protection Implementation Plan is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. This document states SNL/California`s commitment to conduct its operations in an environmentally safe and responsible manner. The Environmental Protection Implementation Plan helps management and staff comply with applicable environmental responsibilities. SNL is committed to operating in full compliance with the letter and spirit of applicable environmental laws, regulations, and standards. Furthermore, SNL/California strives to go beyond compliance with legal requirements by making every effort practical to reduce impacts to the environment to levels as low as reasonably achievable.

Holland, R.C.

1998-03-01T23:59:59.000Z

186

Process for particulate removal from coal liquids  

DOE Patents (OSTI)

Suspended solid particulates are removed from liquefied coal products by first subjecting such products to hydroclone action for removal in the underflow of the larger size particulates, and then subjecting the overflow from said hydroclone action, comprising the residual finer particulates, to an electrostatic field in an electrofilter wherein such finer particulates are deposited in the bed of beads of dielectric material on said filter. The beads are periodically cleaned by backwashing to remove the accumulated solids.

Rappe, Gerald C. (Macungie, PA)

1983-01-01T23:59:59.000Z

187

Method for removing contaminants from plastic resin  

Science Conference Proceedings (OSTI)

A resin recycling method that produces essentially contaminant-free synthetic resin material in an environmentally safe and economical manner. The method includes receiving the resin in container form. The containers are then ground into resin particles. The particles are exposed to a solvent, the solvent contacting the resin particles and substantially removing contaminants on the resin particles. After separating the particles and the resin, a solvent removing agent is used to remove any residual solvent remaining on the resin particles after separation.

Bohnert, George W. (Harrisonville, MO); Hand, Thomas E. (Lee's Summit, MO); DeLaurentiis, Gary M. (Jamestown, CA)

2008-12-09T23:59:59.000Z

188

Passive Core Decay Heat Removal Performance Guideline  

Science Conference Proceedings (OSTI)

Passive decay heat removal systems operate without pumps when normal heat removal systems are not available. Safety is ensured by confirming that an adequate thermal margin is provided to accommodate various operating conditions, design uncertainties, and degradation. Guidelines to ensure adequate thermal performance are provided for three different system configurations.This report introduces utility systems engineers to the design and operation of passive decay heat removal systems and ...

2013-11-26T23:59:59.000Z

189

Vietnam HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

NNSANews posted a photo: Vietnam HEU Removal A convoy escorting the last highly enriched uranium in Vietnam departs Dalat. Facebook Twitter Youtube Flickr Headlines Jul 23,...

190

Metal Organic Clathrates for Carbon Dioxide Removal  

removal from coal-fired power plant flue gas streams. Modified variations of the materials can be used in a variety of other fields as well, ...

191

System for removing contaminants from plastic resin  

DOE Patents (OSTI)

A resin recycling system that produces essentially contaminant-free synthetic resin material in an environmentally safe and economical manner. The system includes receiving the resin in container form. A grinder grinds the containers into resin particles. The particles are exposed to a solvent in one or more solvent wash vessels, the solvent contacting the resin particles and substantially removing contaminants on the resin particles. A separator is used to separate the resin particles and the solvent. The resin particles are then placed in solvent removing element where they are exposed to a solvent removing agent which removes any residual solvent remaining on the resin particles after separation.

Bohnert, George W. (Harrisonville, MO); Hand, Thomas E. (Lee' s Summit, MO); DeLaurentiis, Gary M. (Jamestown, CA)

2010-11-23T23:59:59.000Z

192

Improved sulfur removal processes evaluated for IGCC  

SciTech Connect

An inherent advantage of Integrated Coal Gasification Combined Cycle (IGCC) electric power generation is the ability to easily remove and recover sulfur. During the last several years, a number of new, improved sulfur removal and recovery processes have been commercialized. An assessment is given of alternative sulfur removal processes for IGCC based on the Texaco coal gasifier. The Selexol acid gas removal system, Claus sulfur recovery, and SCOT tail gas treating are currently used in Texaco-based IGCC. Other processes considered are: Purisol, Sulfinol-M, Selefning, 50% MDEA, Sulften, and LO-CAT. 2 tables.

1986-12-01T23:59:59.000Z

193

Method for Removing Precipitates in Biofuel  

ORNL 2010-G00619/jcn UT-B ID 200902314 Method for Removing Precipitates in Biofuel Technology Summary At ORNL the application of ultrasonic energy, or ...

194

Internal Controls Over Classified Computersand Classified Removable...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Classified Removable Media at theLawrence Livermore National Laboratory, IG-0628 Computers are used extensively in the full range of operations at Lawrence Livermore National...

195

Removal of radioisotopes from waste solutions  

DOE Patents (OSTI)

The invention comprises removing radioisotopes from waste liquids or solutions by passing these through filters and through a column containing a suitable salt of phosphoric acid. (Official Gazette)

Kirby, H.W.

1973-10-01T23:59:59.000Z

196

Tritium Removal Facility High Tritium Distillation Simulation.  

E-Print Network (OSTI)

??A dynamic model was developed for the distillation mechanism of the Darlington Tritium Removal Facility. The model was created using the commercial software package MATLAB/Simulink. (more)

Zahedi, Polad

2013-01-01T23:59:59.000Z

197

Former Worker Medical Screening Program Summary of Services Available to Former Workers, February 1, 2013  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 1, 2013 Former Worker Medical Screening Program Summary of Services Available to Former Workers (Sites listed below are primary sites served, but multiple small sites are also served by the Building Trades National Medical Screening Program for construction workers and by the National Supplemental Screening Program for production workers) State DOE Site Worker Population/Medical Screening Program Provider Local Office Location and Phone Number Alaska Amchitka Island All workers, primarily construction CPWR - The Center for Construction Research & Training (CPWR)/Building Trades National Medical Screening Program (BTMed) 1-800-866-9663 California Lawrence Berkeley National Laboratory All workers Queens College (QC)/Worker Health Protection

198

Former Worker Medical Screening Program Summary of Services Available to Former Workers, February 1, 2013  

NLE Websites -- All DOE Office Websites (Extended Search)

February 1, 2013 Former Worker Medical Screening Program Summary of Services Available to Former Workers (Sites listed below are primary sites served, but multiple small sites are also served by the Building Trades National Medical Screening Program for construction workers and by the National Supplemental Screening Program for production workers) State DOE Site Worker Population/Medical Screening Program Provider Local Office Location and Phone Number Alaska Amchitka Island All workers, primarily construction CPWR - The Center for Construction Research & Training (CPWR)/Building Trades National Medical Screening Program (BTMed) 1-800-866-9663 California Lawrence Berkeley National Laboratory All workers Queens College (QC)/Worker Health Protection

199

Furman University OPEN ACCESS PLUS MEDICAL  

E-Print Network (OSTI)

Furman University OPEN ACCESS PLUS MEDICAL BENEFITS ­ Core Plan OPEN ACCESS PLUS MEDICAL BENEFITS ............................................................................................................................................11 Open Access Plus Medical Benefits

200

Medical Surveillance and Nanotechnology Workers.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

Workers Peter D. Lichty, MD MOH FACOEM July 2008 Outline * Principles of Medical Surveillance * Sensitivity and Specificity of Medical Tests * Variability of Medical...

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

ENERGY STAR Score for Medical Offices  

NLE Websites -- All DOE Office Websites (Extended Search)

Medical Offices in the United States Page 1 ENERGY STAR Score for Medical Offices in the United States Technical Reference OVERVIEW The ENERGY STAR Score for Medical Offices...

202

Implantable medical sensor system  

DOE Patents (OSTI)

An implantable chemical sensor system for medical applications is described which permits selective recognition of an analyte using an expandable biocompatible sensor, such as a polymer, that undergoes a dimensional change in the presence of the analyte. The expandable polymer is incorporated into an electronic circuit component that changes its properties (e.g., frequency) when the polymer changes dimension. As the circuit changes its characteristics, an external interrogator transmits a signal transdermally to the transducer, and the concentration of the analyte is determined from the measured changes in the circuit. This invention may be used for minimally invasive monitoring of blood glucose levels in diabetic patients.

Darrow, Christopher B. (Pleasanton, CA); Satcher, Jr., Joe H. (Modesto, CA); Lane, Stephen M. (Oakland, CA); Lee, Abraham P. (Walnut Creek, CA); Wang, Amy W. (Berkeley, CA)

2001-01-01T23:59:59.000Z

203

Medical Screening | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Program Implementation » Medical Screening Medical Screening Medical Screening: Provide medical screening exams that are designed to check for health conditions related to occupational exposures to former workers who choose to participate in the program, including a re-screen exam every three years. Conventional Medical Screening Program Medical screening is a strategy used to identify diseases or conditions in a select population at an early stage, often before signs and symptoms develop, and to refer individuals with suspicious findings to their personal physician or a specialist for further testing, diagnosis, and treatment. The program is not intended to serve as a substitute for routine medical exams through an individual's personal physician. Early Lung Cancer Detection Program

204

Armored garment for protecting  

SciTech Connect

A lightweight, armored protective garment for protecting an arm or leg from blast superheated gases, blast overpressure shock, shrapnel, and spall from a explosive device, such as a Rocket Propelled Grenade (RPG) or a roadside Improvised Explosive Device (IED). The garment has a ballistic sleeve made of a ballistic fabric, such as an aramid fiber (e.g., KEVLAR.RTM.) cloth, that prevents thermal burns from the blast superheated gases, while providing some protection from fragments. Additionally, the garment has two or more rigid armor inserts that cover the upper and lower arm and protect against high-velocity projectiles, shrapnel and spall. The rigid inserts can be made of multiple plies of a carbon/epoxy composite laminate. The combination of 6 layers of KEVLAR.RTM. fabric and 28 plies of carbon/epoxy laminate inserts (with the inserts being sandwiched in-between the KEVLAR.RTM. layers), can meet the level IIIA fragmentation minimum V.sub.50 requirements for the US Interceptor Outer Tactical Vest.

Purvis, James W. (Albuquerque, NM); Jones, II, Jack F. (Albuquerque, NM); Whinery, Larry D. (Albuquerque, NM); Brazfield, Richard (Albuquerque, NM); Lawrie, Catherine (Tijeras, NM); Lawrie, David (Tijeras, NM); Preece, Dale S. (Watkins, CO)

2009-08-11T23:59:59.000Z

205

National Infrastructure Protection Plan  

E-Print Network (OSTI)

this context, our critical infrastructure and key resources (CIKR) may be directly exposed to the event themselves or indirectly exposed as a result of the dependencies and interde- pendencies among CIKR. Within the CIKR protection mission area, national priorities must include preventing catastrophic loss of life

Sen, Pradeep

206

A Surface Protective System  

SciTech Connect

Part of the design and development work connected with the erection of the chemistry "cave" in the "GP" Building entailed an investigation of various protective measures for materials of construction. This work was based on the observations and recommendations of personnel engaged in work at a similar installation at Argonne National Laboratory.

Brown, W. T.

1950-11-01T23:59:59.000Z

207

Thermal protection apparatus  

DOE Patents (OSTI)

An apparatus which thermally protects sensitive components in tools used in a geothermal borehole. The apparatus comprises a Dewar within a housing. The Dewar contains heat pipes such as brass heat pipes for thermally conducting heat from heat sensitive components to a heat sink such as ice.

Bennett, Gloria A. (Los Alamos, NM); Elder, Michael G. (Los Alamos, NM); Kemme, Joseph E. (Albuquerque, NM)

1985-01-01T23:59:59.000Z

208

Thermal protection apparatus  

DOE Patents (OSTI)

The disclosure is directed to an apparatus for thermally protecting sensitive components in tools used in a geothermal borehole. The apparatus comprises a Dewar within a housing. The Dewar contains heat pipes such as brass heat pipes for thermally conducting heat from heat sensitive components such as electronics to a heat sink such as ice.

Bennett, G.A.; Elder, M.G.; Kemme, J.E.

1984-03-20T23:59:59.000Z

209

Fish passage and protection  

DOE Green Energy (OSTI)

This report consists of reprints on fish passage and protection topics from: American Fisheries Society; American Society of Civil Engineers; Harza Engineering Company; Hydro Review Magazine; Idaho National Engineering Laboratory; Independent Energy Magazine; National Hydropower Association; Northwest Hydroelectric Association; United States Army Corps of Engineers; United States Committee on large dams; and the United States Department of the Interior.

Rinehart, B.N.

1993-11-01T23:59:59.000Z

210

Protection Against Ionizing Radiation in Extreme Radiation ...  

Science Conference Proceedings (OSTI)

Protection Against Ionizing Radiation in Extreme Radiation-resistant Microorganisms. ... Elucidated radiation protection by intracellular halides. ...

2013-05-01T23:59:59.000Z

211

Protective Coating Systems  

Science Conference Proceedings (OSTI)

Table 16   Some chemical cleaning treatments for magnesium alloys...Acetic-nitrate 200 mL glacial acetic acid, 50 g NaNO 3 (sodium nitrate), to 1 L H 2 O 21??27 70??80 0.012??0.025 0.0005??0.0009 Removal of mill scale and other surface contamination

212

DISSOLUTION METHOD OF REMOVING BONDING AGENTS  

DOE Patents (OSTI)

A method is given for removing residual aluminumsilicon bonding agents from uranium slugs after the removal of aluminum coatings. To accomplish this the slug is immersed in an aqueous solution about 0.75 N in hydrofluoric acid and about 7 N in nitric acid.

Hyman, H.H.

1960-04-19T23:59:59.000Z

213

Method of removing contaminants from plastic resins  

DOE Patents (OSTI)

A method for removing contaminants from synthetic resin material containers using a first organic solvent system and a second carbon dioxide system. The organic solvent is utilized for removing the contaminants from the synthetic resin material and the carbon dioxide is used to separate any residual organic solvent from the synthetic resin material.

Bohnert, George W. (Harrisonville, MO); Hand, Thomas E. (Lee' s Summit, MO); DeLaurentiis, Gary M. (Jamestown, CA)

2008-11-18T23:59:59.000Z

214

Method for removing contaminants from plastic resin  

Science Conference Proceedings (OSTI)

A method for removing contaminants from synthetic resin material containers using a first organic solvent system and a second carbon dioxide system. The organic solvent is utilized for removing the contaminants from the synthetic resin material and the carbon dioxide is used to separate any residual organic solvent from the synthetic resin material.

Bohnert, George W. (Harrisonville, MO); Hand, Thomas E. (Lee's Summit, MO); DeLaurentiis, Gary M. (Jamestown, CA)

2008-12-30T23:59:59.000Z

215

Method of removing contaminants from plastic resins  

Science Conference Proceedings (OSTI)

A method for removing contaminants from synthetic resin material containers using a first organic solvent system and a second carbon dioxide system. The organic solvent is utilized for removing the contaminants from the synthetic resin material and the carbon dioxide is used to separate any residual organic solvent from the synthetic resin material.

Bohnert,George W. (Harrisonville, MO); Hand,Thomas E. (Lee's Summit, MO); Delaurentiis,Gary M. (Jamestown, CA)

2007-08-07T23:59:59.000Z

216

Global Cut Framework for Removing Symmetries  

Science Conference Proceedings (OSTI)

In this paper, we propose a general technique for removing symmetries in CSPs during search. The idea is to record no-goods, during the exploration of the search tree, whose symmetric counterpart (if any) should be removed. The no-good, called Global ...

Filippo Focacci; Michela Milano

2001-11-01T23:59:59.000Z

217

COST OF MERCURY REMOVAL IN IGCC PLANTS  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost of Mercury Removal Cost of Mercury Removal in an IGCC Plant Final Report September 2002 Prepared for: The United States Department of Energy National Energy Technology Laboratory By: Parsons Infrastructure and Technology Group Inc. Reading, Pennsylvania Pittsburgh, Pennsylvania DOE Product Manager: Gary J. Stiegel DOE Task Manager: James R. Longanbach Principal Investigators: Michael G. Klett Russell C. Maxwell Michael D. Rutkowski PARSONS The Cost of Mercury Removal in an IGCC Plant Final Report i September 2002 TABLE OF CONTENTS Section Title Page 1 Summary 1 2 Introduction 3 3 Background 4 3.1 Regulatory Initiatives 4 3.2 Mercury Removal for Conventional Coal-Fired Plants 4 3.3 Mercury Removal Experience in Gasification 5 3.4 Variability of Mercury Content in Coal 6 4 Design Considerations 7 4.1 Carbon Bed Location

218

Catalyst regeneration process including metal contaminants removal  

DOE Patents (OSTI)

Spent catalysts removed from a catalytic hydrogenation process for hydrocarbon feedstocks, and containing undesired metals contaminants deposits, are regenerated. Following solvent washing to remove process oils, the catalyst is treated either with chemicals which form sulfate or oxysulfate compounds with the metals contaminants, or with acids which remove the metal contaminants, such as 5-50 W % sulfuric acid in aqueous solution and 0-10 W % ammonium ion solutions to substantially remove the metals deposits. The acid treating occurs within the temperature range of 60.degree.-250.degree. F. for 5-120 minutes at substantially atmospheric pressure. Carbon deposits are removed from the treated catalyst by carbon burnoff at 800.degree.-900.degree. F. temperature, using 1-6 V % oxygen in an inert gas mixture, after which the regenerated catalyst can be effectively reused in the catalytic process.

Ganguli, Partha S. (Lawrenceville, NJ)

1984-01-01T23:59:59.000Z

219

Furman University OPEN ACCESS PLUS MEDICAL  

E-Print Network (OSTI)

8:54 AM Furman University OPEN ACCESS PLUS MEDICAL BENEFITS ­ Basic Plan OPEN ACCESS PLUS MEDICAL ...................................................................................................................................................10 Open Access Plus Medical Benefits Basic Plan ...............................................................................................................................................................12 Open Access Plus Medical Benefits Core Plan

220

METHOD AND COATING COMPOSITION FOR PROTECTING AND DECONTAMINATING SURFACES  

DOE Patents (OSTI)

A protective coating useful in the decontamination of surfaces exposed to radioactive substances is described. This coating is placed on the surface before use and is soluble in water, allowing its easy removal in the event decontamination becomes necessary. Suitable coating compositions may be prepared by mixing a water soluble carbohydrate such as sucrose or dextrin, together with a hygroscopic agent such as calcium chloride or zinc chloride.

Overhold, D.C.; Peterson, M.D.

1959-03-10T23:59:59.000Z

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

METHOD AND COATING COMPOSITION FOR PROTECTING AND DECONTAMINATING SURFACES  

DOE Patents (OSTI)

A protective coating useful in the decontamination of surfaces exposed to radioactive substances is presented. This coating is placed on the surface before use and is soluble in waters allowing its easy removal in the event decontamination becomes necessary. Suitable coating compositions may be prepared by mixing a water soluble carbohydrate such as sucrose or dextrin, together with a hygroscopic agent such as calcium chloride or zinc chloride.

Overhold, D.C.; Peterson, M.D.

1959-03-10T23:59:59.000Z

222

Squares of the natural numbers in radiation protection. [Informal history  

SciTech Connect

An informal history of radiation protection is given. The following topics are included: the discovery of x rays and their effects, the formation of the International Committee on X-ray and Radium Protection, the Manhattan Project and its plutonium aspects, dose limits and their origin, the increase in antinuclear writings, the publication of reports on radiation levels and effects, the role of the EPA in medical radiation, and the Oklo phenomenon. Recommendations for NCRP and ICRP actions are given. The publication also contains brief biographies of Lauriston S. Taylor and Herbert M. Parker. (RWR)

Parker, H.M.

1977-01-01T23:59:59.000Z

223

Sandia National Laboratories Medical Isotope Reactor concept.  

SciTech Connect

This report describes the Sandia National Laboratories Medical Isotope Reactor and hot cell facility concepts. The reactor proposed is designed to be capable of producing 100% of the U.S. demand for the medical isotope {sup 99}Mo. The concept is novel in that the fuel for the reactor and the targets for the {sup 99}Mo production are the same. There is no driver core required. The fuel pins that are in the reactor core are processed on a 7 to 21 day irradiation cycle. The fuel is low enriched uranium oxide enriched to less than 20% {sup 235}U. The fuel pins are approximately 1 cm in diameter and 30 to 40 cm in height, clad with Zircaloy (zirconium alloy). Approximately 90 to 150 fuel pins are arranged in the core in a water pool {approx}30 ft deep. The reactor power level is 1 to 2 MW. The reactor concept is a simple design that is passively safe and maintains negative reactivity coefficients. The total radionuclide inventory in the reactor core is minimized since the fuel/target pins are removed and processed after 7 to 21 days. The fuel fabrication, reactor design and operation, and {sup 99}Mo production processing use well-developed technologies that minimize the technological and licensing risks. There are no impediments that prevent this type of reactor, along with its collocated hot cell facility, from being designed, fabricated, and licensed today.

Coats, Richard Lee; Dahl, James J.; Parma, Edward J., Jr.

2010-04-01T23:59:59.000Z

224

Medical Knowledge Morphing: Towards Case-Specific Integration of Heterogeneous Medical Knowledge Resources  

E-Print Network (OSTI)

Medical Knowledge Morphing: Towards Case-Specific Integration of Heterogeneous Medical Knowledge interplay between various medical knowledge modalities--the spectrum of medical knowledge modalities morphing--a knowledge modeling task that allows the integration of heterogeneous medical knowledge

Abidi, Syed Sibte Raza

225

BMC Medical Education BioMed Central  

E-Print Network (OSTI)

Research article Evaluation of the medical student research programme in Norwegian medical schools. A survey of students and supervisors

Steinar Hunskaar; Jarle Breivik; Maje Siebke; Karin Tmmers; Kristian Figenschau; John-bjarne Hansen

2009-01-01T23:59:59.000Z

226

CLEANSPACE 'Small Debris Removal By Laser Illumination And Complementary Technologies'  

SciTech Connect

Studies show that the number of debris in Low Earth Orbit is exponentially growing despite future debris release mitigation measures considered. Especially, the already existing population of small and medium debris (between 1 cm and several dozens of cm) is today a concrete threat to operational satellites. A ground based laser solution which can remove at low expense and in a non-destructive way hazardous debris of decimetric size around selected space assets appears as one highly promising answer. This solution will be studied in the frame of CLEANSPACE project which is a part of the FP7 space theme. The overall CLEANSPACE objective is threefold: to propose an efficient and affordable global system architecture, to tackle safety regulation aspects, political implications and future collaborations, to develop affordable technological bricks and to establish roadmap for the development and the future implantation of a fully functional laser protection system. This paper will present the CLEANSPACE project.

Esmiller, Bruno [Astrium Space Transportation, 66 route de Verneuil, 78133 Les Mureaux (France); Jacquelard, Christophe [CILAS, 8 avenue Buffon - ZI La Source - BP 6319, 45063 Orleans (France)

2011-11-10T23:59:59.000Z

227

Superconducting coil protection  

SciTech Connect

The protection system is based on a two-phase construction program. Phase I is the development of a reliable hardwired relay control system with a digital loop utilizing firmware and a microprocessor controller. Phase II is an expansion of the digital loop to include many heretofore unmonitored coil variables. These new monitored variables will be utilized to establish early quench detection and to formulate confirmation techniques of the quench detection mechanism. Established quench detection methods are discussed and a new approach to quench detection is presented. The new circuit is insensitive to external pulsed magnetic fields and the associated induced voltages. Reliability aspects of the coil protection system are discussed with respect to shutdowns of superconducting coil systems. Redundance and digital system methods are presented as related topics. (auth)

Woods, E.L.

1975-01-01T23:59:59.000Z

228

Best Management Practice: Laboratory and Medical Equipment | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Best Management Practice: Laboratory and Medical Equipment Best Management Practice: Laboratory and Medical Equipment Best Management Practice: Laboratory and Medical Equipment October 8, 2013 - 9:46am Addthis Equipment used in hospitals and laboratories can use significant amounts of water, but also offer the opportunity for substantial water savings by making a few small changes to how and when the water is used by the equipment. Overview Focusing on reducing water use from equipment such as water treatment systems, sterilization/disinfection systems, photographic and x-ray equipment, vacuum systems, glassware washers, and vivarium equipment such as automatic animal watering systems and cage and rack washers can go a long way towards helping Federal facilities achieve water efficiency goals. The U.S. Environmental Protection Agency (EPA) and the Department of Energy

229

Perspective for Female Medical Physicists  

Science Conference Proceedings (OSTI)

Due to cultural and religious reasons, Pakistani women can be reluctant to seek medical attention for disorders affecting their genitals or breasts. As a result, in the case of cervical and breast cancers, oncological treatment is often not received until the diseases are in the late stages. Once a cancer is classified and the tumor marked, the role of the medical physicist begins. Medical physicists' responsibilities include treatment planning, supervising treatment through radiation, dosimetry, contouring, training, equipment selection, education, research, and supervising radiotherapy facilities. In brachytherapy, isotopes are placed at the tumor site in the form of wires or seeds. There are very few female medical physicists in Pakistan. This leads to further hesitation on the part of many women to seek treatment. To help female patients obtain needed medical care, female physics students should be encouraged to pursue the emerging field of medical physics. This would provide a new professional opportunity for female physics students and give comfort to female patients.

Naqvi, Syed Mansoor [Department of Radiology, Aga Khan University Hospital, Karachi (Pakistan); Hasnain, Aziz Fatima [Center for Physics Education, Karachi (Pakistan)

2009-04-19T23:59:59.000Z

230

Radiation protection at CERN  

E-Print Network (OSTI)

This paper gives a brief overview of the general principles of radiation protection legislation; explains radiological quantities and units, including some basic facts about radioactivity and the biological effects of radiation; and gives an overview of the classification of radiological areas at CERN, radiation fields at high-energy accelerators, and the radiation monitoring system used at CERN. A short section addresses the ALARA approach used at CERN.

Forkel-Wirth, Doris; Silari, Marco; Streit-Bianchi, Marilena; Theis, Christian; Vincke, Heinz; Vincke, Helmut

2013-01-01T23:59:59.000Z

231

Protective Coatings Assessment  

Science Conference Proceedings (OSTI)

This report describes assessments of ceramic and thermal spray coatings that have advanced significantly or recently been marketed for use in the utility boiler industry to reduce slagging, mitigate fireside corrosion and potentially, circumferential cracking due to cyclic temperature variations. These innovations promise to enhance coating quality as well as reduce time and labor required to protect large areas of the boiler waterwalls. Coatings may also enable plants to improve production rates; thereb...

2011-12-22T23:59:59.000Z

232

Protective Coatings Assessment  

Science Conference Proceedings (OSTI)

It is well known that fireside corrosion of waterwall panels in coal-fired boilers increased with the introduction of low NOx combustion systems since the early 1980s. This report describes ongoing work to evaluate protective coating solutions used to mitigate the wastage due to corrosion, and to determine which provide the greatest resistance to the circumferential cracking phenomena. It includes recent laboratory corrosion assisted thermal fatigue tests and analyses of field-exposed samples of ...

2012-12-17T23:59:59.000Z

233

Fire Protection Program: Summary  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary Summary Since May 1950, an Annual Fire Protection Program Summary has been submitted by DOE's fire protection community. Currently, this report is required by section 5a.(8) of DOE Order 231.1. "Environment, Safety and Health Reporting." In 1999, an automation initiative was undertaken to streamline data collection and provide a more through review of DOE Reporting Element activities. This action resulted in the delayed publications of the CY 1999 and 2000 reports until 2002. It is now possible however to view all Annual Summary Reporting Element responses since 1991 at the Site, Operations, Lead Program Secretarial Office and Headquarters levels. Additionally, a build-in reference to other DOE reporting activities (CAIRS and ORPS) is available that allows Reporting Elements and managers the opportunity to review all fire protection events along previously mentioned categories. Reports listed below were generated from this application. To obtain a copy of the Annual Summary Application please contact Jim Bisker in the Office of Nuclear and Facility Safety Policy (EH-53) at (301)903-6542 or Jim Bisker.

234

RIVER PROTECTION PROJECT SYSTEM PLAN  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy (DOE), Office of River Protection (ORP) manages the River Protection Project (RPP). The RPP mission is to retrieve and treat Hanford's tank waste and close the tank farms to protect the Columbia River. As a result, ORP is responsible for the retrieval, treatment, and disposal of approximately 57 million gallons 1 of radioactive waste contained in the Hanford Site waste tanks and closure2 of all the tanks and associated facilities. The previous revision of the System Plan was issued in May 2008. ORP has made a number of changes to the tank waste treatment strategy and plans since the last revision of this document, and additional changes are under consideration. ORP has contracts in place to implement the strategy for completion of the mission and establish the capability to complete the overall mission. The current strategl involves a number of interrelated activities. ORP will reduce risk to the environment posed by tank wastes by the following: (1) Retrieving the waste from the single-shell tanks (SST) to double-shell tanks (DST) and delivering the waste to the Waste Treatment and Immobilization Plant (WTP). (2) Constructing and operating the WTP, which will safely treat all of the high-level waste (HLW) fraction contained in the tank farms. About one-third of the low-activity waste (LAW) fraction separated from the HLW fraction in the WTP will be immobilized in the WTP LAW Vitrification Facility. (3) Developing and deploying supplemental treatment capability assumed to be a second LAW vitrification facility that can safely treat about two-thirds of the LAW contained in the tank farms. (4) Developing and deploying supplemental pretreatment capability currently assumed to be an Aluminum Removal Facility (ARF) using a lithium hydrotalcite process to mitigate sodium management issues. (5) Developing and deploying treatment and packaging capability for contact-handled transuranic (CH-TRU) tank waste for possible shipment to and disposal at the Waste Isolation Pilot Plant (WIPP) in New Mexico. (6) Deploying interim storage capacity for the immobilized high-level waste (IHLW) pending determination of the final disposal pathway. (7) Closing the SST and DST tank farms, ancillary facilities, and all associated waste management and treatment facilities. (8) Optimizing the overall mission by resolution of technical and programmatic uncertainties, configuring the tank farms to provide a steady, well-balanced feed to the WTP, and performing trade-offs of the required amount and type of supplemental treatment and of the amount of HLW glass versus LAW glass. ORP has made and continues to make modifications to the WTP contract as needed to improve projected plant performance and address known or emerging risks. Key elements needed to implement the strategy described above are included within the scope of the Tank Operations Contract (TOC). Interim stabilization of the SSTs was completed in March 2004. As of April 2009, retrieval of seven SSTs has been completed and retrieval of four additional SSTs has been completed to the limits of technology. Demonstration of supplemental LAW treatment technologies has stopped temporarily pending revision of mission need requirements. Award of a new contract for tank operations (TOC), the ongoing tank waste retrieval experience, HLW disposal issues, and uncertainties in waste feed delivery and waste treatment led to the revision of the Performance Measurement Baseline (PM B), which is currently under review prior to approval. 6 This System Plan is aligned with the current WTP schedule, with hot commissioning beginning in 2018, and full operations beginning in late 2019. Major decisions regarding the use of supplemental treatment and the associated technology, the ultimate needed capacity, and its relationship to the WTP have not yet been finalized. This System Plan assumes that the outcome of these decisions will be to provide a second LAW vitrification facility. No final implementation decisions regarding supplemental technology can be made until the Tank Closure and

CERTA PJ; KIRKBRIDE RA; HOHL TM; EMPEY PA; WELLS MN

2009-09-15T23:59:59.000Z

235

RIVER PROTECTION PROJECT SYSTEM PLAN  

SciTech Connect

The U.S. Department of Energy (DOE), Office of River Protection (ORP) manages the River Protection Project (RPP). The RPP mission is to retrieve and treat Hanford's tank waste and close the tank farms to protect the Columbia River. As a result, ORP is responsible for the retrieval, treatment, and disposal of approximately 57 million gallons 1 of radioactive waste contained in the Hanford Site waste tanks and closure2 of all the tanks and associated facilities. The previous revision of the System Plan was issued in May 2008. ORP has made a number of changes to the tank waste treatment strategy and plans since the last revision of this document, and additional changes are under consideration. ORP has contracts in place to implement the strategy for completion of the mission and establish the capability to complete the overall mission. The current strategl involves a number of interrelated activities. ORP will reduce risk to the environment posed by tank wastes by the following: (1) Retrieving the waste from the single-shell tanks (SST) to double-shell tanks (DST) and delivering the waste to the Waste Treatment and Immobilization Plant (WTP). (2) Constructing and operating the WTP, which will safely treat all of the high-level waste (HLW) fraction contained in the tank farms. About one-third of the low-activity waste (LAW) fraction separated from the HLW fraction in the WTP will be immobilized in the WTP LAW Vitrification Facility. (3) Developing and deploying supplemental treatment capability assumed to be a second LAW vitrification facility that can safely treat about two-thirds of the LAW contained in the tank farms. (4) Developing and deploying supplemental pretreatment capability currently assumed to be an Aluminum Removal Facility (ARF) using a lithium hydrotalcite process to mitigate sodium management issues. (5) Developing and deploying treatment and packaging capability for contact-handled transuranic (CH-TRU) tank waste for possible shipment to and disposal at the Waste Isolation Pilot Plant (WIPP) in New Mexico. (6) Deploying interim storage capacity for the immobilized high-level waste (IHLW) pending determination of the final disposal pathway. (7) Closing the SST and DST tank farms, ancillary facilities, and all associated waste management and treatment facilities. (8) Optimizing the overall mission by resolution of technical and programmatic uncertainties, configuring the tank farms to provide a steady, well-balanced feed to the WTP, and performing trade-offs of the required amount and type of supplemental treatment and of the amount of HLW glass versus LAW glass. ORP has made and continues to make modifications to the WTP contract as needed to improve projected plant performance and address known or emerging risks. Key elements needed to implement the strategy described above are included within the scope of the Tank Operations Contract (TOC). Interim stabilization of the SSTs was completed in March 2004. As of April 2009, retrieval of seven SSTs has been completed and retrieval of four additional SSTs has been completed to the limits of technology. Demonstration of supplemental LAW treatment technologies has stopped temporarily pending revision of mission need requirements. Award of a new contract for tank operations (TOC), the ongoing tank waste retrieval experience, HLW disposal issues, and uncertainties in waste feed delivery and waste treatment led to the revision of the Performance Measurement Baseline (PM B), which is currently under review prior to approval. 6 This System Plan is aligned with the current WTP schedule, with hot commissioning beginning in 2018, and full operations beginning in late 2019. Major decisions regarding the use of supplemental treatment and the associated technology, the ultimate needed capacity, and its relationship to the WTP have not yet been finalized. This System Plan assumes that the outcome of these decisions will be to provide a second LAW vitrification facility. No final implementation decisions regarding supplemental technology can be made until the Tank Closure and

CERTA PJ; KIRKBRIDE RA; HOHL TM; EMPEY PA; WELLS MN

2009-09-15T23:59:59.000Z

236

Network protection with service guarantees  

E-Print Network (OSTI)

With the increasing importance of communication networks comes an increasing need to protect against network failures. Traditional network protection has been an "all-or-nothing" approach: after any failure, all network ...

Kuperman, Gregory

2013-01-01T23:59:59.000Z

237

Medication List- September 14, 2010  

Energy.gov (U.S. Department of Energy (DOE))

This scale is created to provide a guide for the physician determination of ability to work for HRP certified persons with certain conditions and while taking certain medications.

238

Managed Programs, Environmental Protection Division  

NLE Websites -- All DOE Office Websites (Extended Search)

training and supporting subject matter expertise. Environmental Information Management System: storing, managing, verifying, protecting, retrieving and archiving BNL's...

239

Laboratory Evaluation of Novel Trace Element Removal Technologies for Wet FGD Wastewater  

Science Conference Proceedings (OSTI)

Wet flue gas desulfurization (FGD) systems can remove a wide range of trace elements, such as mercury, selenium, arsenic, and others from the flue gas. Some trace elements leave the FGD system with solid byproduct streams, but a portion generally leaves as dissolved species in the FGD chloride purge stream. The U.S. Environmental Protection Agency (EPA) effluent limitation guidelines and state or local regulations generally limit the quantities of these trace species in wastewater discharges from ...

2012-12-31T23:59:59.000Z

240

Actinide removal from nitric acid waste streams  

SciTech Connect

Actinide separations research at the Rocky Flats Plant (RFP) has found ways to significantly improve plutonium secondary recovery and americium removal from nitric acid waste streams generated by plutonium purification operations. Capacity and breakthrough studies show anion exchange with Dowex 1x4 (50 to 100 mesh) to be superior for secondary recovery of plutonium. Extraction chromatography with TOPO(tri-n-octyl-phosphine oxide) on XAD-4 removes the final traces of plutonium, including hydrolytic polymer. Partial neutralization and solid supported liquid membrane transfer removes americium for sorption on discardable inorganic ion exchangers, potentially allowing for non-TRU waste disposal.

Muscatello, A.C.; Navratil, J.D.

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

In situ removal of contamination from soil  

DOE Patents (OSTI)

A process of remediation of cationic heavy metal contamination from soil utilizes gas phase manipulation to inhibit biodegradation of a chelating agent that is used in an electrokinesis process to remove the contamination, and further gas phase manipulation to stimulate biodegradation of the chelating agent after the contamination has been removed. The process ensures that the chelating agent is not attacked by bioorganisms in the soil prior to removal of the contamination, and that the chelating agent does not remain as a new contaminant after the process is completed.

Lindgren, Eric R. (Albuquerque, NM); Brady, Patrick V. (Albuquerque, NM)

1997-01-01T23:59:59.000Z

242

Method for changing removable bearing for a wind turbine generator  

DOE Patents (OSTI)

A wind generator having removable change-out bearings includes a rotor and a stator, locking bolts configured to lock the rotor and stator, a removable bearing sub-assembly having at least one shrunk-on bearing installed, and removable mounting bolts configured to engage the bearing sub-assembly and to allow the removable bearing sub-assembly to be removed when the removable mounting bolts are removed.

Bagepalli, Bharat Sampathkumaran (Niskayuna, NY); Jansen, Patrick Lee (Scotia, NY), Gadre; Aniruddha Dattatraya (Rexford, NY)

2008-04-22T23:59:59.000Z

243

Former Worker Medical Screening Program  

NLE Websites -- All DOE Office Websites (Extended Search)

of New Mexico Worker Health Protection Program conducted jointly by Queens College of the City University of New York, United Steelworkers, the Atomic Trades and Labor Council in...

244

Medical imaging systems  

DOE Patents (OSTI)

A medical imaging system provides simultaneous rendering of visible light and fluorescent images. The system may employ dyes in a small-molecule form that remains in a subject's blood stream for several minutes, allowing real-time imaging of the subject's circulatory system superimposed upon a conventional, visible light image of the subject. The system may also employ dyes or other fluorescent substances associated with antibodies, antibody fragments, or ligands that accumulate within a region of diagnostic significance. In one embodiment, the system provides an excitation light source to excite the fluorescent substance and a visible light source for general illumination within the same optical guide that is used to capture images. In another embodiment, the system is configured for use in open surgical procedures by providing an operating area that is closed to ambient light. More broadly, the systems described herein may be used in imaging applications where a visible light image may be usefully supplemented by an image formed from fluorescent emissions from a fluorescent substance that marks areas of functional interest.

Frangioni, John V. (Wayland, MA)

2012-07-24T23:59:59.000Z

245

Management, Emergency Medical  

E-Print Network (OSTI)

Leiba and co-authors should be commended for their article describing emergency physician bioterrorism preparedness on a national level. 1 The recognition of the relative lack of knowledge of emergency physician study subjects about anthrax, an organism that is recognized as a high potential bioterrorist agent, was particularly interesting. Their description of efforts that were required to alert and educate front-line physicians about potential bioterrorist agents illustrates a successful approach to this new area of focus in emergency medicine. Bioterrorism threats have redefined the role of emergency medicine in relation to population health. Emergency departments can be considered the primary interface between the medical or individual health sector and population or public health sector. Collaboration of emergency care and public health providers is essential for the recognition and control of potential bioterrorism events. Not only is this collaboration important for bioterrorism, but it also is important to any public health emergency including disease outbreaks and natural or man-made disasters. 2 The detection of potential bioterrorist agents and

Samuel J. Stratton

2007-01-01T23:59:59.000Z

246

Kazakhstan HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Kazakhstan HEU Removal | National Nuclear Security Administration Kazakhstan HEU Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Kazakhstan HEU Removal Kazakhstan HEU Removal Location Kazakhstan United States 48° 59' 44.1492" N, 67° 3' 37.9692" E See map: Google Maps Printer-friendly version Printer-friendly version

247

Sweden Plutonium Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Sweden Plutonium Removal | National Nuclear Security Administration Sweden Plutonium Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Sweden Plutonium Removal Sweden Plutonium Removal Location Sweden United States 62° 24' 4.4136" N, 15° 22' 51.096" E See map: Google Maps Printer-friendly version Printer-friendly version

248

Turkey HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Turkey HEU Removal | National Nuclear Security Administration Turkey HEU Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Turkey HEU Removal Turkey HEU Removal Location Turkey United States 38° 26' 50.2044" N, 40° 15' 14.0616" E See map: Google Maps Printer-friendly version Printer-friendly version

249

Hungary HEU removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

removal | National Nuclear Security Administration removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Hungary HEU removal Hungary HEU removal Location Hungary United States 47° 11' 51.6336" N, 19° 41' 15" E See map: Google Maps Printer-friendly version Printer-friendly version Javascript is required to view this map.

250

Mexico HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Removal | National Nuclear Security Administration Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Mexico HEU Removal Mexico HEU Removal Location Mexico United States 24° 24' 35.298" N, 102° 49' 55.3116" W See map: Google Maps Printer-friendly version Printer-friendly version Javascript is required to view this map.

251

Removal of volatile materials from forepump oil  

Science Conference Proceedings (OSTI)

A method of clearing condensable vapors from forepump oil is described. Air is bubbled though the oil reservoir removing volatile material from the oil and allowing continuous pumping of materials by non?vented pumps.

Paul P. Nicole

1980-01-01T23:59:59.000Z

252

Method of removing polychlorinated biphenyl from oil  

DOE Patents (OSTI)

Polychlorinated biphenyls are removed from oil by extracting the biphenyls into methanol. The mixture of methanol and extracted biphenyls is distilled to separate methanol therefrom, and the methanol is recycled for further use in extraction of biphenyls from oil.

Cook, Gus T. (Paducah, KY); Holshouser, Stephen K. (Boaz, KY); Coleman, Richard M. (Paducah, KY); Harless, Charles E. (Smithland, KY); Whinnery, III, Walter N. (Paducah, KY)

1983-01-01T23:59:59.000Z

253

Method of removing polychlorinated biphenyl from oil  

DOE Patents (OSTI)

Polychlorinated biphenyls are removed from oil by extracting the biphenyls into methanol. The mixture of methanol and extracted biphenyls is distilled to separate methanol therefrom, and the methanol is recycled for further use in extraction of biphenyls from oil.

Cook, G.T.; Holshouser, S.K.; Coleman, R.M.; Harless, C.E.; Whinnery, W.N. III

1982-03-17T23:59:59.000Z

254

Chile HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

HEU Removal Location United States 25 28' 1.4916" S, 69 33' 55.548" W See map: Google Maps Printer-friendly version Printer-friendly version Javascript is required to view...

255

France HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

HEU Removal Location United States 45 44' 20.0544" N, 2 17' 6.5616" E See map: Google Maps Printer-friendly version Printer-friendly version Javascript is required to view...

256

Libya HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Removal Location Libya United States 27 34' 9.5448" N, 17 24' 8.4384" E See map: Google Maps Printer-friendly version Printer-friendly version Javascript is required to view...

257

Install Removable Insulation on Valves and Fittings  

Science Conference Proceedings (OSTI)

This revised ITP tip sheet on installing removable insulation on valves and fittings provides how-to advice for improving the system using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

258

Aquatic Habitat Protection Permit (Saskatchewan, Canada) | Open...  

Open Energy Info (EERE)

aID5044&FilenameAquatic+Habitat+Protection+Permit+Application.pdf&lEnglish Summary The Environmental Management and Protection Act, 2002 (EMPA) provides for the protection of...

259

Laser removal of sludge from steam generators  

SciTech Connect

A method of removing unwanted chemical deposits known as sludge from the metal surfaces of steam generators with laser energy is provided. Laser energy of a certain power density, of a critical wavelength and frequency, is intermittently focused on the sludge deposits to vaporize them so that the surfaces are cleaned without affecting the metal surface (sludge substrate). Fiberoptic tubes are utilized for laser beam transmission and beam direction. Fiberoptics are also utilized to monitor laser operation and sludge removal.

Nachbar, Henry D. (Ballston Lake, NY)

1990-01-01T23:59:59.000Z

260

Protective measures for personnel  

SciTech Connect

This document addresses radiation protection concerns for workers in the experimental laboratories and production plants where nuclear fission piles are being used. A broad in-depth discussion is provided based with the experiences gained in the Manhattan Project and being applied to contemporary activities. Discussion is thorough and encompasses control of external irradiations including alpha, beta, gamma, and neutron radiations; and control of radioactivity within the body by control of inhalation, ingestion, and entrance through skin or wounds. General measures for the control of radiation hazards is addressed by provision of clothing and waste disposal. An Appendix 1 is entitled General Rules and Procedures Concerning Activity Hazards.

Nickson, J.J.

1946-12-13T23:59:59.000Z

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Hearing protection for miners  

Science Conference Proceedings (OSTI)

A NIOSH analysis showed that at age 50 approximately 90% of coal miners have a hearing impairment, yet noise included hearing loss is 100% preventable. The article discusses requirements of the MSHA regulations, 30 CFR Part 62 - occupational noise exposure (2000) and a 2008-MSHA document describing technologically achievable and promising controls for several types of mining machinery. Hearing protection is still required for exposure to greater than 90 dBA. These are now commercially available ways to determine how much attenuation an individual gets from a given hearing protector, known as 'fit testing'. 3 refs., 1 fig., 1 tab., 1 photo.

Schulz, T. [Sperian Hearing Protection (United States)

2008-10-15T23:59:59.000Z

262

Beaudrey Water Intake Protection (WIP) Screen Pilot-Scale Impingement Survival Study  

Science Conference Proceedings (OSTI)

The Beaudrey Water Intake Protection (WIP) Screen Pilot-scale Impingement Survival Study is a fish protection technology evaluation project designed to support Omaha Public Power District's (OPPD) Clean Water Act 316(b) permitting needs. The report gives the results of a one-year study that consisted of impingement monitoring and impingement survival monitoring conducted on fish removed by the Beaudrey WIP screen. The studies were conducted during 2008 at Intake No. 3 of OPPD's North Omaha Station (NOS) ...

2009-03-10T23:59:59.000Z

263

The Medical College of Wisconsin 6 THE MEDICAL COLLEGE OF WISCONSIN MEDICAL SCHOOL ACADEMIC BULLETIN 2011-2012  

E-Print Network (OSTI)

The Medical College of Wisconsin 6 THE MEDICAL COLLEGE OF WISCONSIN MEDICAL SCHOOL ACADEMIC BULLETIN 2011-2012 The Medical College of Wisconsin offers MD, PhD, MA, MS and MPH degrees. There are more as volunteer faculty. More than 1,250 physicians on the Medical College faculty provide care in every specialty

264

WHAT TO DO IN A MEDICAL EMERGENCY (2004) If the medical emergency requires immediate medical attention or is life  

E-Print Network (OSTI)

WHAT TO DO IN A MEDICAL EMERGENCY (2004) If the medical emergency requires immediate medical attention or is life threatening, call 911. If the medical emergency is not life threatening, first notify: Gottschalk Medical Plaza, Primary Care Clinic on campus (walk-ins OK) UCIMC: May see any UCI provider

Mease, Kenneth D.

265

ADVANCED WORKER PROTECTION SYSTEM  

Science Conference Proceedings (OSTI)

From 1993 to 2000, OSS worked under a cost share contract from the Department of Energy (DOE) to develop an Advanced Worker Protection System (AWPS). The AWPS is a protective ensemble that provides the user with both breathing air and cooling for a NIOSH-rated duration of two hours. The ensemble consists of a liquid air based backpack, a Liquid Cooling Garment (LCG), and an outer protective garment. The AWPS project was divided into two phases. During Phase 1, OSS developed and tested a full-scale prototype AWPS. The testing showed that workers using the AWPS could work twice as long as workers using a standard SCBA. The testing also provided performance data on the AWPS in different environments that was used during Phase 2 to optimize the design. During Phase 1, OSS also performed a life-cycle cost analysis on a representative clean up effort. The analysis indicated that the AWPS could save the DOE millions of dollars on D and D activities and improve the health and safety of their workers. During Phase 2, OSS worked to optimize the AWPS design to increase system reliability, to improve system performance and comfort, and to reduce the backpack weight and manufacturing costs. To support this design effort, OSS developed and tested several different generations of prototype units. Two separate successful evaluations of the ensemble were performed by the International Union of Operation Engineers (IUOE). The results of these evaluations were used to drive the design. During Phase 2, OSS also pursued certifying the AWPS with the applicable government agencies. The initial intent during Phase 2 was to finalize the design and then to certify the system. OSS and Scott Health and Safety Products teamed to optimize the AWPS design and then certify the system with the National Institute of Occupational Health and Safety (NIOSH). Unfortunately, technical and programmatic difficulties prevented us from obtaining NIOSH certification. Despite the inability of NIOSH to certify the design, OSS was able to develop and successfully test, in both the lab and in the field, a prototype AWPS. They clearly demonstrated that a system which provides cooling can significantly increase worker productivity by extending the time they can function in a protective garment. They were also able to develop mature outer garment and LCG designs that provide considerable benefits over current protective equipment, such as self donning and doffing, better visibility, and machine washable. A thorough discussion of the activities performed during Phase 1 and Phase 2 is presented in the AWPS Final Report. The report also describes the current system design, outlines the steps needed to certify the AWPS, discusses the technical and programmatic issues that prevented the system from being certified, and presents conclusions and recommendations based upon the seven year effort.

Judson Hedgehock

2001-03-16T23:59:59.000Z

266

Translationally Controlled Tumor Protein Protects against DNA Damage in Low  

NLE Websites -- All DOE Office Websites (Extended Search)

Translationally Controlled Tumor Protein Protects against DNA Damage in Low Translationally Controlled Tumor Protein Protects against DNA Damage in Low Dose γ-Irradiated Cells Edouard Azzam New Jersey Medical School Cancer Center Abstract We have previously shown that exposure to low dose/low dose rate γ-rays can protect normal human and rodent cells against oxidative/clastogenic damages induced spontaneously or by a subsequent challenge dose of ionizing radiation. To gain insight into the mechanisms underlying these effects, we used amine-specific isobaric tags for relative and absolute quantitation (iTRAQ)-based approach to identify induced proteolytic events. Intriguingly, the Translationally Controlled Tumor Protein (TCTP) was significantly up-regulated after 10cGy (0.2cGy/h) but not after 4 Gy (1 Gy/min) in several strains of normal human fibroblasts maintained in 2- or

267

MEDICAL OR PSYCHOLOGICAL EMERGENCY Ambulatory Patient (Students)  

E-Print Network (OSTI)

MEDICAL OR PSYCHOLOGICAL EMERGENCY Ambulatory Patient (Students): Medical assistance can) with a physician is available for urgent medical concerns. Faculty and Staff can seek medical assistance If the individual needing assistance is not ambulatory, call 911 to request assistance from Emergency Medical

Meyers, Steven D.

268

Medical research: assessing the benefits to society  

E-Print Network (OSTI)

May 2006 Medical research: assessing the benefits to society A report by the UK Evaluation Forum, supported by the Academy of Medical Sciences, Medical Research Council and Wellcome Trust. #12;The independent Academy of Medical Sciences promotes advances in medical science and campaigns to ensure

Maizels, Rick

269

Identifying important concepts from medical documents  

Science Conference Proceedings (OSTI)

Automated medical concept recognition is important for medical informatics such as medical document retrieval and text mining research. In this paper, we present a software tool called keyphrase identification program (KIP) for identifying topical concepts ... Keywords: Document keyphrase, Keyphrase extraction, Medical concepts, Medical documents, Noun phrase extraction, Text mining

Quanzhi Li; Yi-Fang Brook Wu

2006-12-01T23:59:59.000Z

270

Guide to Critical Infrastructure Protection Cyber Vulnerability...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Critical Infrastructure Protection Cyber Vulnerability Assessment Guide to Critical Infrastructure Protection Cyber Vulnerability Assessment This document describes a customized...

271

Office of Environmental Protection, Sustainability Support &...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Protection, Sustainability Support & Corporate Safety Analysis Office of Environmental Protection, Sustainability Support & Corporate Safety Analysis Organizational...

272

Cavern Protection (Texas) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Administration Other Agencies You are here Home Savings Cavern Protection (Texas) Cavern Protection (Texas) Eligibility Utility Fed. Government Commercial...

273

Canadian Environmental Protection Act 2012 (Canada) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Canadian Environmental Protection Act 2012 (Canada) Canadian Environmental Protection Act 2012 (Canada) Eligibility Agricultural Commercial Construction Developer Fed. Government...

274

Review of potential impacts to sea turtles from underwater explosive removal of offshore structures  

SciTech Connect

The purpose of this study was to collect and synthesize existing information relevant to the explosive removal of offshore structures (EROS) in aquatic environments. Data sources were organized and summarized by topic - explosive removal methods, physics of underwater explosions, sea turtle resources, documented impacts to sea turtles, and mitigation of effects. Information was gathered via electronic database searches and literature source review. Bulk explosive charges are the most commonly used technique in EROS. While the physical principles of underwater detonations and the propagation of pressure and acoustic waves are well understood, there are significant gaps in the application of this knowledge. Impacts to sea turtles from explosive removal operations may range from non-injurious effects (e.g. acoustic annoyance; mild tactile detection or physical discomfort) to varying levels of injury (i.e. non-lethal and lethal injuries). Very little information exists regarding the impacts of underwater explosions on sea turtles. Effects of explosions on turtles often must be inferred from documented effects to other vertebrates with lungs or other gas-containing organs, such as mammals and most fishes. However, a cautious approach should be used when determining impacts to sea turtles based on extrapolations from other vertebrates. The discovery of beached sea turtles and bottlenose dolphins following an explosive platform removal event in 1986 prompted the initiation of formal consultation between the U.S. Department of the Interior, Minerals Management Service (MMS) and the National Marine Fisheries Service (NMFS), authorized through the Endangered Species Act Section 7, to determine a mechanism to minimize potential impacts to listed species. The initial consultation resulted in a requirement for oil and gas companies to obtain a permit (through separate consultations on a case-by-case basis) prior to using explosives in Federal waters. Because many offshore structure removal operations are similar, a 'generic' Incidental Take Statement was established by the NMFS that describes requirements to protect sea turtles when an operator's individual charge weights did not exceed 50 lb (23 kg). Requirements associated with the Incidental Take Permit were revised in 2003 and 2006 to accommodate advances in explosive charge technologies, removals of structures in deeper waters, and adequate protection of deep water marine mammal species in Gulf of Mexico waters. Generally, these requirements include pre- and post-detonation visual monitoring using standard surface and aerial survey methods for sea turtles and marine mammals, and, in some scenarios, passive acoustic survey methods for marine mammals within a specified radius from an offshore structure. The survey program has been successful in mitigating impacts to sea turtles associated with EROS. However, even with these protective measures in place, there have been observations of sea turtles affected by explosive platform removals.

Viada, Stephen T. [CSA International, Inc., 759 Parkway Street, Jupiter, FL 33477 (United States)], E-mail: sviada@conshelf.com; Hammer, Richard M. [CSA International, Inc., 759 Parkway Street, Jupiter, FL 33477 (United States)], E-mail: rhammer@conshelf.com; Racca, Roberto [JASCO Research Ltd., Vancouver Island Technology Park, Suite 2101, 4464 Markham Street, Victoria, British Columbia, V8Z 7X8 (Canada)], E-mail: rob@jasco.com; Hannay, David [JASCO Research Ltd., Vancouver Island Technology Park, Suite 2101, 4464 Markham Street, Victoria, British Columbia, V8Z 7X8 (Canada)], E-mail: dave@jasco.com; Thompson, M. John [CSA International, Inc., 759 Parkway Street, Jupiter, FL 33477 (United States)], E-mail: jthompson@conshelf.com; Balcom, Brian J. [CSA International, Inc., 759 Parkway Street, Jupiter, FL 33477 (United States)], E-mail: bbalcom@conshelf.com; Phillips, Neal W. [CSA International, Inc., 759 Parkway Street, Jupiter, FL 33477 (United States)], E-mail: nphillips@conshelf.com

2008-05-15T23:59:59.000Z

275

Notices ENVIRONMENTAL PROTECTION AGENCY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

94 Federal Register 94 Federal Register / Vol. 74, No. 209 / Friday, October 30, 2009 / Notices ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-8798-8] Environmental Impact Statements and Regulations; Availability of EPA Comments Availability of EPA comments prepared pursuant to the Environmental Review Process (ERP), under section 309 of the Clean Air Act and Section 102(2)(c) of the National Environmental Policy Act as amended. Requests for copies of EPA comments can be directed to the Office of Federal Activities at 202-564-7146 or http://www.epa.gov/ compliance/nepa/. An explanation of the ratings assigned to draft environmental impact statements (EISs) was published in FR dated July 17, 2009 (74 FR 34754). Draft EISs EIS No. 20090290, ERP No. D-FTA- F54014-WI, Kenosha-Racine-Milwaukee

276

Thermal protection apparatus  

DOE Patents (OSTI)

An apparatus for thermally protecting heat sensitive components of tools. The apparatus comprises a Dewar holding the heat sensitive components. The Dewar has spaced-apart inside walls, an open top end and a bottom end. A plug is located in the top end. The inside wall has portions defining an inside wall aperture located at the bottom of the Dewar and the outside wall has portions defining an outside wall aperture located at the bottom of the Dewar. A bottom connector has inside and outside components. The inside component sealably engages the inside wall aperture and the outside component sealably engages the outside wall aperture. The inside component is operatively connected to the heat sensitive components and to the outside component. The connections can be made with optical fibers or with electrically conducting wires.

Bennett, G.A.; Moore, T.K.

1986-08-20T23:59:59.000Z

277

Trunnion Collar Removal Machine - Gap Analysis Table  

SciTech Connect

The purpose of this document is to review the existing the trunnion collar removal machine against the ''Nuclear Safety Design Bases for License Application'' (NSDB) [Ref. 10] requirements and to identify codes and standards and supplemental requirements to meet these requirements. If these codes and standards can not fully meet these requirements then a ''gap'' is identified. These gaps will be identified here and addressed using the ''Trunnion Collar Removal Machine Design Development Plan'' [Ref. 15]. The codes and standards, supplemental requirements, and design development requirements for the trunnion collar removal machine are provided in the gap analysis table (Appendix A, Table 1). Because the trunnion collar removal machine is credited with performing functions important to safety (ITS) in the NSDB [Ref. 10], design basis requirements are applicable to ensure equipment is available and performs required safety functions when needed. The gap analysis table is used to identify design objectives and provide a means to satisfy safety requirements. To ensure that the trunnion collar removal machine performs required safety functions and meets performance criteria, this portion of the gap analysis tables supplies codes and standards sections and the supplemental requirements and identifies design development requirements, if needed.

M. Johnson

2005-06-27T23:59:59.000Z

278

Environmental Protection Agency  

Office of Legacy Management (LM)

Protection Agency Protection Agency . . Book, 4 Project Rulison Off-Site Surveillance Operation for the Flaring Period - October 26 - November 3, 1970 DISCLAIMER Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. P r e l i m i n a r y Report March 1 0 , 1 9 7 1 PROJECT RULISON OFF-SITE ' SURVEILLANCE FOR THE E'LARING OPERATION OF OCTOBER 26 - November 3, 1970 S o u t h w e s t e r n R a d i o l o g i c a l H e a l t h Laboratqry ~ u g i n g . . . t h e p e r i o d of O c t o b e r 26' through November 3 , ,1970, n a t u r a l g a s f r o m -.._. -- . . t h e P r o j e c t R u l i s o n t e s t w e l l was f l a r e d f o r t h e h i g h - r a t e p r o d u c t i o n f l a r i n g t e s t . . The' f l a r i n g o p e r a t i o n was s t a r t e d , a t 1430 M!5T on October 2 6 , 1970. The g a s flow r a t e w a s i n c r e a s e d o v e r a six-hour p

279

Protected Planet | Open Energy Information  

Open Energy Info (EERE)

Protected Planet Protected Planet Jump to: navigation, search Tool Summary Name: Protected Planet Agency/Company /Organization: United Nations Environment Programme (UNEP), International Union for Conservation of Nature Sector: Energy, Land Topics: Co-benefits assessment, - Environmental and Biodiversity Resource Type: Dataset, Maps, Software/modeling tools User Interface: Website Website: protectedplanet.net/about Cost: Free Protected Planet Screenshot References: Protected Planet[1] "Be inspired by the most beautiful places on the planet. Explore the worlds national parks, wilderness areas and world heritage sites. Help us find and improve information on every protected area in the world. Protectedplanet.net lets you discover these incredible places through elegant mapping and intuitive searching. Protectedplanet.net wants you to

280

Regulatory compliance issues related to the White Oak Creek Embayment time-critical removal action  

SciTech Connect

In September 1990, Martin Marietta Energy Systems (Energy Systems) discovered high levels of Cesium-137 ({sup 137}Cs) in surface sedimenus near the mouth of White Oak Creek Embayment (WOCE). White Oak Creek (WOC) receives surface water drainage from Oak Ridge National Laboratory. Since this discovery, the Department of Energy (DOE) and Energy Systems have pursued actions designed to stabilize the contaminated WOCE sediments under provisions of the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), and the implementing regulations in the National Contingency Plan (NCP) (40 CFR Part 300), as a time-critical removal action. By definition, a time-critical removal is an action where onsite activities are initiated within six months of the determination that a removal action is appropriate. Time-critical removal actions allow comparatively rapid mobilization to protect human health and the environment without going through the lengthy and extensive CERCLA Remedial Investigation/Feasibility Study/Record of Decision process. Many aspects of the project, in terms of compliance with the substantive requirements of the NCP and ARARs, have exceeded the regulatory requirements, despite the fact that there is no apparent authority on conducting removal actions at Federal facilities. Much of the interpretation of the NCP was groundbreaking in nature for both EPA and DOE. 4 refs., 2 figs.

Leslie, M. (CDM Federal Programs Corp., Oak Ridge, TN (United States)); Kimmel, B.L. (Oak Ridge National Lab., TN (United States))

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Hydrogen Removal From Heating Oil of a Parabolic Trough ...  

Hydrogen Removal From Heating Oil of a Parabolic Trough Increases the Life of the Trough and its Components A Method to Selectively Remove & Measure Hydrogen Gas from ...

282

An Experimental Study of Chemical Oxygen Demand Removal from ...  

Science Conference Proceedings (OSTI)

The experimental results showed that the refractory organics in coking wastewater can be effectively removed by this process, and COD removal efficiency was...

283

Michigan Nonhydrocarbon Gases Removed from Natural Gas (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Date: 10312013 Referring Pages: Nonhydrocarbon Gases Removed from Natural Gas Michigan Natural Gas Gross Withdrawals and Production Nonhydrocarbon Gases Removed from...

284

Salt Fluxes for Alkali and Alkaline Earth Element Removal from ...  

Science Conference Proceedings (OSTI)

Sep 1, 2001... for Alkali and Alkaline Earth Element Removal from Molten Aluminum ... Solid chloride salts containing MgC2 can be used to remove alkali...

285

Colorado Nonhydrocarbon Gases Removed from Natural Gas (Million...  

Gasoline and Diesel Fuel Update (EIA)

Nonhydrocarbon Gases Removed from Natural Gas (Million Cubic Feet) Colorado Nonhydrocarbon Gases Removed from Natural Gas (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3...

286

South Dakota Natural Gas Removed from Natural Gas (Million Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

View History: Monthly Annual Download Data (XLS File) South Dakota Natural Gas Removed from Natural Gas (Million Cubic Feet) South Dakota Natural Gas Removed from Natural Gas...

287

Protective Force Firearms Qualification Courses  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PROTECTIVE FORCE PROTECTIVE FORCE FIREARMS QUALIFICATION COURSES U.S. DEPARTMENT OF ENERGY Office of Health, Safety and Security AVAILABLE ONLINE AT: INITIATED BY: http://www.hss.energy.gov Office of Health, Safety and Security Protective Force Firearms Qualification Courses July 2011 i TABLE OF CONTENTS SECTION A - APPROVED FIREARMS QUALIFICATION COURSES .......................... I-1 CHAPTER I . INTRODUCTION ................................................................................... I-1 1. Scope .................................................................................................................. I-1 2. Content ............................................................................................................... I-1

288

Making Medical Records More Resilient  

E-Print Network (OSTI)

Hurricane Katrina showed that the current methods for handling medicalrecords are minimally resilient to large scale disasters. This research presents a preliminary model for measuring the resilience of medical records ...

Rudin, Robert

2008-02-17T23:59:59.000Z

289

Fire Protection Program: Related Sites  

NLE Websites -- All DOE Office Websites (Extended Search)

Office of Science Brookhaven National Laboratory Hanford Fire Department CPSC OSHA NRC EPA FEMA National Fire Academy Fire Protection Association Australia National Fire...

290

Florida Radiation Protection Act (Florida)  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Public Health is responsible for administering a statewide radiation protection program. The program is designed to permit development and utilization of sources of radiation for...

291

Mercury removal from solid mixed waste  

SciTech Connect

The removal of mercury from mixed wastes is an essential step in eliminating the temporary storage of large inventories of mixed waste throughout the Department of Energy (DOE) complex. Currently thermal treatment has been identified as a baseline technology and is being developed as part of the DOE Mixed Waste Integrated Program (MWIP). Since thermal treatment will not be applicable to all mercury containing mixed waste and the removal of mercury prior to thermal treatment may be desirable, laboratory studies have been initiated at Oak Ridge National Laboratory (ORNL) to develop alternative remediation technologies capable of removing mercury from certain mixed waste. This paper describes laboratory investigations of the KI/I{sub 2} leaching processes to determine the applicability of this process to mercury containing solid mixed waste.

Gates, D.D.; Morrissey, M.; Chava, K.K.; Chao, K.

1994-12-31T23:59:59.000Z

292

Technetium Removal Using Tc-Goethite Coprecipitation  

SciTech Connect

This report describes the results from laboratory tests performed at Pacific Northwest National Laboratory for the U.S. Department of Energy (DOE) EM-31 Support Program (EMSP) subtask, Low temperature waste forms coupled with technetium removal using an alternative immobilization process such as Fe(II) treated-goethite precipitation to increase our understanding of 99Tc long-term stability in goethite mineral form and the process that controls the 99Tc(VII) reduction and removal by the final Fe (oxy)hydroxide forms. The overall objectives of this task were to 1) evaluate the transformation process of Fe (oxy)hydroxide solids to the more crystalline goethite (?-FeOOH) mineral for 99Tc removal and 2) determine the mechanism that limits 99Tc(IV) reoxidation in Fe(II)-treated 99Tc-goethite mineral and 3) evaluate whether there is a long-term 99Tcoxidation state change for Tc sequestered in the iron solids.

Um, Wooyong; Wang, Guohui; Jung, Hun Bok; Peterson, Reid A.

2013-11-18T23:59:59.000Z

293

Medical students' attitudes toward gay men  

E-Print Network (OSTI)

attitudes toward gay men. BMC Medical Education 2012 12:71.859. 4. Snowden S: The Medical School Curriculum and LGBT60. Matharu et al. BMC Medical Education 2012, 12:71 http://

Matharu, Kabir; Kravitz, Richard L; McMahon, Graham T; Wilson, Machelle D; Fitzgerald, Faith T

2012-01-01T23:59:59.000Z

294

WHAT IS MEDICAL MINERALOGY AND GEOCHEMISTRY?  

E-Print Network (OSTI)

WHAT IS MEDICAL MINERALOGY AND GEOCHEMISTRY? The connection between human health of medical mineralogy and geochemistry (MMG) focuses on understanding the equilibria and reaction pathways phases with naturally occurring, inorganic solid phases within the human body. Medical mineralogy

Sahai, Nita

295

Achromatic and uncoupled medical gantry  

DOE Patents (OSTI)

A medical gantry that focus the beam from the beginning of the gantry to the exit of the gantry independent of the rotation angle of the gantry by keeping the beam achromatic and uncoupled, thus, avoiding the use of collimators or rotators, or additional equipment to control the beam divergence, which may cause beam intensity loss or additional time in irradiation of the patient, or disadvantageously increase the overall gantry size inapplicable for the use in the medical treatment facility.

Tsoupas, Nicholaos (Center Moriches, NY); Kayran, Dmitry (Rocky Point, NY); Litvinenko, Vladimir (Mt. Sinai, NY); MacKay, William W. (Wading River, NY)

2011-11-22T23:59:59.000Z

296

Process for removing metals from water  

DOE Patents (OSTI)

A process for removing metals from water including the steps of prefiltering solids from the water, adjusting the pH to between about 2 and 3, reducing the amount of dissolved oxygen in the water, increasing the pH to between about 6 and 8, adding water-soluble sulfide to precipitate insoluble sulfide- and hydroxide-forming metals, adding a containing floc, and postfiltering the resultant solution. The postfiltered solution may optionally be eluted through an ion exchange resin to remove residual metal ions. 2 tabs.

Napier, J.M.; Hancher, C.M.; Hackett, G.D.

1987-06-29T23:59:59.000Z

297

Removal of uranium from aqueous HF solutions  

DOE Patents (OSTI)

This invention is a simple and effective method for removing uranium from aqueous HF solutions containing trace quantities of the same. The method comprises contacting the solution with particulate calcium fluoride to form uranium-bearing particulates, permitting the particulates to settle, and separting the solution from the settled particulates. The CaF.sub.2 is selected to have a nitrogen surface area in a selected range and is employed in an amount providing a calcium fluoride/uranium weight ratio in a selected range. As applied to dilute HF solutions containing 120 ppm uranium, the method removes at least 92% of the uranium, without introducing contaminants to the product solution.

Pulley, Howard (West Paducah, KY); Seltzer, Steven F. (Paducah, KY)

1980-01-01T23:59:59.000Z

298

Removal of uranium from aqueous HF solutions  

Science Conference Proceedings (OSTI)

This invention is a simple and effective method for removing uranium from aqueous HF solutions containing trace quantities of the same. The method comprises contacting the solution with particulate calcium fluoride to form uranium-bearing particulates, permitting the particulates to settle, and separating the solution from the settled particulates. The CaF2 is selected to have a nitrogen surface area in a selected range and is employed in an amount providing a calcium fluoride/uranium weight ratio in a selected range. As applied to dilute HF solutions containing 120 ppm uranium, the method removes at least 92% of the uranium without introducing contaminants to the product solution.

Pulley, H.; Seltzer, S.F.

1980-11-18T23:59:59.000Z

299

Alameda County Medical Center Beth Israel Deaconess Medical Center, Boston MA  

E-Print Network (OSTI)

Alameda County Medical Center Beth Israel Deaconess Medical Center, Boston MA California Pacific Medical Center, San Francisco Cedar Sinai Medical Center Los Angeles Children's Hospital Orange Co. City of Hope National Medical Center, Duarte CA Community Regional Medical Center, Fresno Desert Regional

Tsien, Roger Y.

300

Former Worker Medical Screening Program - Battelle Laboratories...  

NLE Websites -- All DOE Office Websites (Extended Search)

West Jefferson Former Construction Workers Former Worker Medical Screening Program (FWP) Project Name: Building Trades National Medical Screening Program Covered DOE Site: Battelle...

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Medical Plans for Medicare-Eligible Retirees  

NLE Websites -- All DOE Office Websites (Extended Search)

Medicare-Eligible Retirees Medical Plans for Medicare-Eligible Retirees Blue Cross Blue Shield of New Mexico (BCBSNM) is the provider of medical benefits. Contact Retiree Insurance...

302

Former Worker Medical Screening Program - Portsmouth Gaseous...  

NLE Websites -- All DOE Office Websites (Extended Search)

Construction Workers Former Worker Medical Screening Program (FWP) Project Name: Building Trades National Medical Screening Program Covered DOE Site: Portsmouth Worker Population...

303

Former Worker Medical Screening Program - Battelle Laboratories...  

NLE Websites -- All DOE Office Websites (Extended Search)

King Avenue Former Construction Workers Former Worker Medical Screening Program (FWP) Project Name: Building Trades National Medical Screening Program Covered DOE Site: Battelle...

304

ORISE Resources: Medical Office Preparedness Planner  

NLE Websites -- All DOE Office Websites (Extended Search)

partnership with CDC yields Medical Office Preparedness Planner for Primary Care Providers The Medical Office Preparedness Planner is a tool for primary care providers (PCPs) and...

305

Medical Device Failure Analysis??Specific Materials  

Science Conference Proceedings (OSTI)

...ASM International, 2012, p 343??359ASM Handbook, Volume 23, Materials for Medical Devices,B.A. James, Medical Device Failure

306

Former Worker Medical Screening Program Implementation | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Former Worker Medical Screening Program Implementation Former Worker Medical Screening Program Implementation Program implementation focuses on four specific activities, which are:...

307

Former Worker Medical Screening Program - Brookhaven National...  

NLE Websites -- All DOE Office Websites (Extended Search)

Construction Workers Former Worker Medical Screening Program (FWP) Project Name: Building Trades National Medical Screening Program Covered DOE Site: Brookhaven National Laboratory...

308

Former Workers Medical Facilities with Experience Evaluating...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Former Workers Medical Facilities with Experience Evaluating Chronic Beryllium Disease Former Workers Medical Facilities with Experience Evaluating Chronic Beryllium Disease April...

309

Former Worker Medical Screening Program - Mallinckrodt Chemical...  

NLE Websites -- All DOE Office Websites (Extended Search)

Mallinckrodt Chemical Co. Former Construction Workers Former Worker Medical Screening Program (FWP) Project Name: Building Trades National Medical Screening Program Covered DOE...

310

ORISE: Argonne National Laboratory Electonic Medical Records...  

NLE Websites -- All DOE Office Websites (Extended Search)

successfully design electronic medical records system for Argonne National Laboratory Health worker accessing electronic medical records Argonne National Laboratory (ANL) provides...

311

100-KE REACTOR CORE REMOVAL PROJECT ALTERNATIVE ANALYSIS WORKSHOP REPORT  

Science Conference Proceedings (OSTI)

On December 15-16, 2009, a 100-KE Reactor Core Removal Project Alternative Analysis Workshop was conducted at the Washington State University Consolidated Information Center, Room 214. Colburn Kennedy, Project Director, CH2M HILL Plateau Remediation Company (CHPRC) requested the workshop and Richard Harrington provided facilitation. The purpose of the session was to select the preferred Bio Shield Alternative, for integration with the Thermal Shield and Core Removal and develop the path forward to proceed with project delivery. Prior to this workshop, the S.A. Robotics (SAR) Obstruction Removal Alternatives Analysis (565-DLV-062) report was issued, for use prior to and throughout the session, to all the team members. The multidisciplinary team consisted ofrepresentatives from 100-KE Project Management, Engineering, Radcon, Nuclear Safety, Fire Protection, Crane/Rigging, SAR Project Engineering, the Department of Energy Richland Field Office, Environmental Protection Agency, Washington State Department of Ecology, Defense Nuclear Facility Safety Board, and Deactivation and Decommission subject matter experts from corporate CH2M HILL and Lucas. Appendix D contains the workshop agenda, guidelines and expectations, opening remarks, and attendance roster going into followed throughout the workshop. The team was successful in selecting the preferred alternative and developing an eight-point path forward action plan to proceed with conceptual design. Conventional Demolition was selected as the preferred alternative over two other alternatives: Diamond Wire with Options, and Harmonic Delamination with Conventional Demolition. The teams preferred alternative aligned with the SAR Obstruction Removal Alternative Analysis report conclusion. However, the team identified several Path Forward actions, in Appendix A, which upon completion will solidify and potentially enhance the Conventional Demolition alternative with multiple options and approaches to achieve project delivery. In brief, the Path Forward was developed to reconsider potential open air demolition areas; characterize to determine if any zircaloy exists, evaluate existing concrete data to determine additional characterization needs, size the new building to accommodate human machine interface and tooling, consider bucket thumb and use ofshape-charges in design, and finally to utilize complex-wide and industry explosive demolition lessons learned in the design approach. Appendix B documents these results from the team's use ofValue Engineering process tools entitled Weighted Analysis Alternative Matrix, Matrix Conclusions, Evaluation Criteria, and Alternative Advantages and Disadvantages. These results were further supported with the team's validation of parking-lot information sheets: memories (potential ideas to consider), issues/concerns, and assumptions, contained in Appendix C. Appendix C also includes the recorded workshop flipchart notes taken from the SAR Alternatives and Project Overview presentations. The SAR workshop presentations, including a 3-D graphic illustration demonstration video have been retained in the CHPRC project file, and were not included in this report due to size limitations. The workshop concluded with a round robin close-out where each member was engaged for any last minute items and meeting utility. In summary, the team felt the session was value added and looked forward to proceeding with the recommended actions and conceptual design.

HARRINGTON RA

2010-01-15T23:59:59.000Z

312

Occupational Medical Surveillance System (OMSS) PIA, Idaho National...  

NLE Websites -- All DOE Office Websites (Extended Search)

Medical Surveillance System (OMSS) PIA, Idaho National Laboratory Occupational Medical Surveillance System (OMSS) PIA, Idaho National Laboratory Occupational Medical Surveillance...

313

Healthgrids, the SHARE project, medical data and agents: retrospect and prospect  

Science Conference Proceedings (OSTI)

The application of grid computing to biomedical research domains in the early years of the century has opened up promising prospects for the extension of this philosophy to translational medicine and hence to personalized healthcare. As the business ... Keywords: agents, cloud computing, data protection, electronic patient records, healthgrids, medical knowledge

Tony Solomonides

2010-11-01T23:59:59.000Z

314

Novel methods for respirable dust removal. Final report  

SciTech Connect

Two novel devices with potential for controlling emissions of dust particles in the respirable size range (0.3 to 3 microns) are the electrostatically enhanced cyclone (or electrocyclone) and acoustic agglomeration. The electrocyclone combines electrostatic, inertial forces and larger unit size compared to conventional cyclones to achieve improved performance. The acoustic agglomerator uses an oscillating acoustic flow field to cause particle collision and agglomeration. The resulting large particles are then more readily separable by conventional methods. The application of these novel methods to respirable dust control in pressurized fluidized-bed combustion and conventional pulverized coal combustion for electric power generation is explored in this study. In a PFBC power plant, dust particles entrained in the combustion gases must be removed at high temperature and pressure in order to protect a gas turbine from erosion. A key technical issue in this application is whether the hot gas cleanup equipment can satisfy the NSPS, or whether supplementary stack gas cleanup, such as a baghouse, is required downstream of the gas turbine. The potential of both the electrocyclone and the acoustic agglomerator for achieving NSPS ahead of the gas turbine has been assessed. In conventional PC power plants, particulate cleanup is normally accomplished with electrostatic precipitators. However, plants burning low sulfur western coals have experienced difficulty achieving adequate particulate emissions control with electrostatic precipitators, due to the high resistivity of the coal ash. For these applications the electrocyclone or an acoustic agglomerator coupled with either an electrocyclone or more conventional removal technique, might prove attractive. The principal conclusions drawn from the work performed and the recommendations based on the results are detailed. (LTN)

1980-09-01T23:59:59.000Z

315

Adaptive protection algorithm and system  

Science Conference Proceedings (OSTI)

An adaptive protection algorithm and system for protecting electrical distribution systems traces the flow of power through a distribution system, assigns a value (or rank) to each circuit breaker in the system and then determines the appropriate trip set points based on the assigned rank.

Hedrick, Paul (Pittsburgh, PA); Toms, Helen L. (Irwin, PA); Miller, Roger M. (Mars, PA)

2009-04-28T23:59:59.000Z

316

Data Protection Office October 2010  

E-Print Network (OSTI)

Data Protection Office October 2010 AUTHORISATION FORM FOR DATA PROCESSING BY STUDENTS This form should be completed where students are processing personal data for research or study purposes. In order to meet the requirements of the Data Protection Act 1998 and ensure the personal data is being processed

Mottram, Nigel

317

Corrosion protection for silver reflectors  

DOE Patents (OSTI)

A method of protecting silver reflectors from damage caused by contact with gaseous substances which are often present in the atmosphere and a silver reflector which is so protected. The inventive method comprises at least partially coating a reflector with a metal oxide such as aluminum oxide to a thickness of 15 {angstrom} or less. 6 figs.

Arendt, P.N., Scott, M.L.

1989-10-04T23:59:59.000Z

318

Corrosion protection for silver reflectors  

SciTech Connect

A method of protecting silver reflectors from damage caused by contact with gaseous substances which are often present in the atmosphere and a silver reflector which is so protected. The inventive method comprises at least partially coating a reflector with a metal oxide such as aluminum oxide to a thickness of 15 .ANG. or less.

Arendt, Paul N. (Los Alamos, NM); Scott, Marion L. (Los Alamos, NM)

1991-12-31T23:59:59.000Z

319

Removal site evaluation report on the Tower Shielding Facility at Oak Ridge National Laboratory, Oak Ridge, Tennessee  

Science Conference Proceedings (OSTI)

This removal site evaluation report for the Tower Shielding Facility (TSF) at Oak Ridge National Laboratory was prepared to provide the Environmental Restoration Program with information necessary to evaluate whether hazardous and/or radiological contaminants in and around the Tower Shielding Facility pose a substantial risk to human health or the environment (i.e., a high probability of adverse effects) and if remedial site evaluations or removal actions are, therefore, required. The scope of the project included a review of historical evidence regarding operations and use of the facility; interviews with facility personnel concerning current and past operating practices; a site inspection; and identification of hazard areas requiring maintenance, removal, or remedial actions. Based an the findings of this removal site evaluation, adequate efforts are currently being made at the TSF to contain and control existing contamination and hazardous substances on site in order to protect human health and the environment No conditions requiring maintenance or removal actions to mitigate imminent or potential threats to human health and the environment were identified during this evaluation. Given the current conditions and status of the buildings associated with the TSF, this removal site evaluation is considered complete and terminated according to the requirements for removal site evaluation termination.

NONE

1996-09-01T23:59:59.000Z

320

Method of removing cesium from steam  

SciTech Connect

Method for removal of radioactive cesium from a hot vapor, such as high temperature steam, including the steps of passing input hot vapor containing radioactive cesium into a bed of silicate glass particles and chemically incorporating radioactive cesium in the silicate glass particles at a temperature of at least about 700.degree. F.

Carson, Jr., Neill J. (Clarendon Hills, IL); Noland, Robert A. (Oak Park, IL); Ruther, Westly E. (Skokie, IL)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Pentek metal coating removal system: Baseline report  

SciTech Connect

The Pentek coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek coating removal system consisted of the ROTO-PEEN Scaler, CORNER-CUTTER{reg_sign}, and VAC-PAC{reg_sign}. They are designed to remove coatings from steel, concrete, brick, and wood. The Scaler uses 3M Roto Peen tungsten carbide cutters while the CORNER-CUTTER{reg_sign} uses solid needles for descaling activities. These hand tools are used with the VAC-PAC{reg_sign} vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure minimal, but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

1997-07-31T23:59:59.000Z

322

ASBESTOS PIPE-INSULATION REMOVAL ROBOT SYSTEM  

SciTech Connect

This final topical report details the development, experimentation and field-testing activities for a robotic asbestos pipe-insulation removal robot system developed for use within the DOE's weapon complex as part of their ER and WM program, as well as in industrial abatement. The engineering development, regulatory compliance, cost-benefit and field-trial experiences gathered through this program are summarized.

Unknown

2000-09-15T23:59:59.000Z

323

Process for removing carbon from uranium  

DOE Patents (OSTI)

Carbon contamination is removed from uranium and uranium alloys by heating in inert atmosphere to 700.degree.-1900.degree.C in effective contact with yttrium to cause carbon in the uranium to react with the yttrium. The yttrium is either in direct contact with the contaminated uranium or in indirect contact by means of an intermediate transport medium.

Powell, George L. (Oak Ridge, TN); Holcombe, Jr., Cressie E. (Knoxville, TN)

1976-01-01T23:59:59.000Z

324

Heat exchanger with a removable tube section  

DOE Patents (OSTI)

A heat exchanger is described in which the tube sheet is secured against primary liquid pressure, but which allows for easy removal of the tube section. The tube section is supported by a flange which is secured by a number of shear blocks, each of which extends into a slot which is immovable with respect to the outer shell of the heat exchanger. (auth)

Wolowodiuk, W.; Anelli, J.

1975-07-29T23:59:59.000Z

325

REMOVAL OF CHLORIDE FROM AQUEOUS SOLUTIONS  

DOE Patents (OSTI)

The removal of chlorides from aqueons solutions is described. The process involves contacting the aqueous chloride containing solution with a benzene solution about 0.005 M in phenyl mercuric acetate whereby the chloride anions are taken up by the organic phase and separating the organic phase from the aqueous solutions.

Schulz, W.W.

1959-08-01T23:59:59.000Z

326

Former Worker Medical Screening Program | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Former Worker Medical Screening Program Former Worker Medical Screening Program The Former Worker Medical Screening Program (FWP) provides ongoing medical screening examinations,...

327

Medical Migration: Strategies for Affordable Care in an Unaffordable System  

E-Print Network (OSTI)

the whole thing. Our American medical system is a greedy ripcompanies, doctors, American Medical Association (AMA) andEcology of Health in Medical Anthropology in Medical

Miller-Thayer, Jennifer Catherine

2010-01-01T23:59:59.000Z

328

Medical and Biohazardous Waste Generator's Guide (Revision 2)  

E-Print Network (OSTI)

Biohazardous Waste Training Medical/Biohazardous WasteInspections 7. Forms and Supplies Medical Waste AccumulationLog Ordering Medical Waste Supplies 8. Solid Medical Waste

Waste Management Group

2006-01-01T23:59:59.000Z

329

Substation control and protection project  

SciTech Connect

This report describes the results of EPRI-sponsored Project RP1359-7, dealing with digital protection and control of transmission class substations. Earlier work involved a study of the feasibility of an integrated protection and control system, specification of functional requirements and selection of the optimum architecture for the system. An integrated system including line, bus and transformer protection was designed, built and laboratory tested. It was subsequently installed at the Deans substation of Public Service Electric and Gas (New Jersey). A standalone, digital transmission line system was built and installed at the Branchburg substation of PSE G, for coordinated line protection with the integrated system. The system is called WESPAC, an acronym for Westinghouse Substation Protection and Control. 52 refs., 174 figs.

Cassel, R.L.; Deliyannides, J.S.; Dzieduszko, J.W.; Harvey, J.H.; Hertz, L.H.; Klancher, F.; Mays, L.M.; McGarry, M.J.; Pettis, L.G.; Pistolese, L.F.; Reuther, J.F.; Sackin, M.; Szarmach, D.J.; Udren, E.A. (Westinghouse ABB Power T and D Co., Coral Springs, FL (USA). Relay and Telecommunications Div.)

1990-04-01T23:59:59.000Z

330

Cleanup Progresses at the Office of River Protection | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cleanup Progresses at the Office of River Protection Cleanup Progresses at the Office of River Protection Cleanup Progresses at the Office of River Protection December 24, 2013 - 12:00pm Addthis The concrete “core” is removed from Tank C-105 after workers cut a 55-inch hole in the tank dome. The concrete "core" is removed from Tank C-105 after workers cut a 55-inch hole in the tank dome. A composite image of dozens of individual-frame photos taken inside Tank C-110 provides a rare panoramic view of its interior. Portions of the tank floor and the Foldtrack waste-retrieval system are clearly visible. A composite image of dozens of individual-frame photos taken inside Tank C-110 provides a rare panoramic view of its interior. Portions of the tank floor and the Foldtrack waste-retrieval system are clearly visible.

331

Cleanup Progresses at the Office of River Protection | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cleanup Progresses at the Office of River Protection Cleanup Progresses at the Office of River Protection Cleanup Progresses at the Office of River Protection December 24, 2013 - 12:00pm Addthis The concrete “core” is removed from Tank C-105 after workers cut a 55-inch hole in the tank dome. The concrete "core" is removed from Tank C-105 after workers cut a 55-inch hole in the tank dome. A composite image of dozens of individual-frame photos taken inside Tank C-110 provides a rare panoramic view of its interior. Portions of the tank floor and the Foldtrack waste-retrieval system are clearly visible. A composite image of dozens of individual-frame photos taken inside Tank C-110 provides a rare panoramic view of its interior. Portions of the tank floor and the Foldtrack waste-retrieval system are clearly visible.

332

Medical Technologies Innovation Training 2014 BIOINNOVATE FELLOWSHIP  

E-Print Network (OSTI)

Medical Technologies Innovation Training 2014 BIOINNOVATE FELLOWSHIP BioInnovate Ireland is now medical technology companies and for the development of innovative medical device products. Ireland's medical technology sector consists of over 250 companies, over 25,000 employees, and 13 of the world's top

Prinz, Friedrich B.

333

Metals With Toxicity Related To Medical Therapy  

Science Conference Proceedings (OSTI)

...respectively, so they do have importance in medical therapy. Toxicologic effects are unlikely and seldom occur....

334

Formalising medical quality indicators to improve guidelines  

E-Print Network (OSTI)

Formalising medical quality indicators to improve guidelines Marjolein van Gendt, Annette ten Teije,annette,rserban,frank.van.harmelen}@cs.vu.nl Abstract. Medical guidelines can significantly improve quality of med- ical care and reduce costs. But how that are formulated by medical institutions to evaluate medical care. The main research questions are (i) whether

ten Teije, Annette

335

MEDICAL IMAGE ARCHIVE, RETRIEVAL AND COMMUNICATION  

E-Print Network (OSTI)

15.03.2013 1 MEDICAL IMAGE ARCHIVE, RETRIEVAL AND COMMUNICATION BNG 5122 Medical Image Analysis Advisor: Assist. Prof. Dr. Devrim ?NAY S. Ahsen YILDIRIM INTRODUCTION Archiving medical images for future in · clinical review · diagnosis to compare with patients' current examinations · as a resource in medical

?nay, Devrim

336

BNG5122 Medical Imaging Analysis REGISTRATION  

E-Print Network (OSTI)

16.04.2013 1 BNG5122 Medical Imaging Analysis Project REGISTRATION Gökhan Gökay Istanbul Bahçeehir University Advisor: Asst. Prof. Dr. Devrim ?nay Outline 16 April 2013 2 BNG5122 Medical Imaging Analysis 2013 3 BNG5122 Medical Imaging Analysis Registration is technique for medical image analysis To combine

?nay, Devrim

337

Formalising medical quality indicators to improve guidelines  

E-Print Network (OSTI)

Formalising medical quality indicators to improve guidelines Marjolein van Gendt1 , Annette ten,annette,rserban,frank.van.harmelen}@cs.vu.nl Abstract. Medical guidelines can significantly improve quality of med- ical care and reduce costs. But how that are formulated by medical institutions to evaluate medical care. The main research questions are (i) whether

van Harmelen, Frank

338

MEDICAL STATEMENT Participant Record (Confidential Information)  

E-Print Network (OSTI)

MEDICAL STATEMENT Participant Record (Confidential Information) This is a statement in which you this statement prior to signing it. You must complete this Medical Statement, which includes the medical cold or congestion, epilepsy, a severe medical problem or who is under the influence of alcohol

Kavanagh, Karen L.

339

Medical Examination Office of Human Resources  

E-Print Network (OSTI)

Medical Examination 4.40 Office of Human Resources Applies to: Faculty, staff, graduate associates-292-2800 ohrc@hr.osu.edu hr.osu.edu/elr Policy clarification for medical center employees Medical Center Employee Relations 614-293-4988 Medical exam arrangements Employee Health Services 614-293-8146 #12;

Howat, Ian M.

340

NEW NIST MEDICAL-INDUSTRIAL RADIATION FACILITY ...  

Science Conference Proceedings (OSTI)

... NEW NIST MEDICAL-INDUSTRIAL RADIATION FACILITY WILL HELP DEVELOP NEW TECHNOLOGIES, ESTABLISH STANDARDS. ...

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

New nano trap protects environment | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

New nano trap protects environment New nano trap protects environment By Tona Kunz * October 31, 2012 Tweet EmailPrint This story was originally published in volume 10, number 5 of Innovation magazine. A new type of nanoscale molecular trap makes it possible for industry to store large amounts of hydrogen in small fuel cells or capture, compact and remove volatile radioactive gas from spent nuclear fuel in an affordable, easily commercialized way. The ability to adjust the size of the trap openings to select for specific molecules or to alter how molecules are released at industrially accessible pressures makes the trap uniquely versatile. The trap is constructed of commercially available material and made possible through collaborative work at Argonne and Sandia national laboratories. "This introduces a new class of materials to nuclear waste remediation,"

342

An innovative method of providing total breaker failure protection  

Science Conference Proceedings (OSTI)

Breaker failure relaying has been generally achieved through the use of a current monitoring relay to determine whether current continues to flow into a fault after a breaker has been instructed to interrupt the circuit. If current continues to flow after a predefined period of time, the circuit breaker is considered to have failed. Steps must then be taken to trip the next set of upstream breakers in the power system to remove the faulted circuit and prevent system damage. However, with industrial power systems, this may be the utility`s breakers on the feeding transmission line. Regardless, breaker failure schemes must be designed to isolate both the faulted circuit and the failed circuit breaker. This paper discusses a new and innovative method of protecting a circuit breaker from the failure described above, plus other failures that go unprotected with conventional schemes, this providing total breaker failure protection.

Stringer, N.T.; Waser, D. [Basler Electric Co., Highland, IL (United States)

1996-09-01T23:59:59.000Z

343

Fire Protection Account Request Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fire Protection System Account Request Form Fire Protection System Account Request Form To obtain a user id and password to access the Fire Protection system, please complete the form, save the file and email it to hssUserSupport@hq.doe.gov or print and fax it to 301-903-9823. We will provide a username and password to new account holders. Please allow several business days to process your account request. When your request is approved, you will be contacted with your

344

Physical protection of power reactors  

SciTech Connect

Sandia Laboratories has applied a systematic approach to designing physical protection systems for nuclear facilities to commercial light-water reactor power plants. A number of candidate physical protection systems were developed and evaluated. Focus is placed on the design of access control subsystems at each of three plant layers: the protected area perimeter, building surfaces, and vital areas. Access control refers to barriers, detectors, and entry control devices and procedures used to keep unauthorized personnel and contraband out of the plant, and to control authorized entry into vital areas within the plant.

Darby, J.L.

1979-01-01T23:59:59.000Z

345

512-S Facility, Actinide Removal Process Radiological Design Summary Report  

SciTech Connect

This report contains top-level requirements for the various areas of radiological protection for workers. Detailed quotations of the requirements for applicable regulatory documents can be found in the Radiological Design Summary Report Implementation Guide. For the purposes of demonstrating compliance with these requirements, per Engineering Standard 01064, ''shall consider / shall evaluate'' indicates that the designer must examine the requirement for the design and either incorporate or provide a technical justification as to why the requirement is not incorporated. This report describes how the Building 512-S, Actinide Removal Process meets the required radiological design criteria and requirements based on 10CFR835, DOE Order 420.1A, WSRC Manual 5Q and various other DOE guides and handbooks. The analyses supporting this Radiological Design Summary Report initially used a source term of 10.6 Ci/gallon of Cs-137 as the basis for bulk shielding calculations. As the project evolved, the source term was reduced to 1.1 Ci/gallon of Cs-137. This latter source term forms the basis for later dose rate evaluations.

Nathan, S.J.

2004-04-21T23:59:59.000Z

346

Improved Cobalt Removal: Field Testing Phase: Effects of Normally Encountered Plant Impurities on Removal Performance  

Science Conference Proceedings (OSTI)

This study examined the effects of plant impurities on cobalt removal from liquid radioactive waste. Improved process knowledge is critical to utilities that are continually working to increase the performance of their low-level waste (LLW) treatment systems. This report provides predictive chemistry information for improved cobalt removal obtained from test work at Catawba Nuclear Station. It also provides test methodologies for performing similar evaluations at other member plants.

2001-11-26T23:59:59.000Z

347

Improved Processes to Remove Naphthenic Acids  

NLE Websites -- All DOE Office Websites (Extended Search)

Improved Processes to Remove Naphthenic Acids Improved Processes to Remove Naphthenic Acids Final Technical Report (From October 1, 2002 to September 30, 2005) Principle Authors Aihua Zhang, Qisheng Ma, Kangshi Wang, Yongchun Tang (co-PI), William A. Goddard (PI), Date Report was issued: December 9, 2005 DOE Award number: DE-FC26-02NT15383 Name and Address of Submitting Organization California Institute of Technology 1200 East California Blvd., Pasadena, CA91125 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any

348

Categorical Exclusion 4568, Crane Removal Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

l)eterminationFornl l)eterminationFornl Project Title: Crane Removal Project (4568) Program or Program Office: Y -12 Site Office Location: Oak Ridge Tennessee Project Description: This work scope is to remove an old legacy crane trolley and old crane operated cab. General Administration/Management DA I - Routine business actions DA2 - Administrative contract amendments DA4 - Interpretations/rulings for existing regulations DA5 - Regulatory interpretations without environmental effect DA6 - Procedural rulemakings upgrade DA7 - Transfer of property, use unchanged DA8 - Award of technical support/M&O/personal service contracts DA9 - Info gathering, analysis, documentation, dissemination, and training DAIO - Reports on non-DOE legislation DA II - Technical advice and planning assistance

349

Removal of arsenic compounds from petroliferous liquids  

DOE Patents (OSTI)

Described is a process for removing arsenic from petroliferous derived liquids by contacting said liquid at an elevated temperature with a divinylbenzene-crosslinked polystyrene having catechol ligands anchored thereon. Also, described is a process for regenerating spent catecholated polystyrene by removal of the arsenic bound to it from contacting petroliferous liquid as described above and involves: a. treating said spent catecholated polystyrene, at a temperature in the range of about 20.degree. to 100.degree. C. with an aqueous solution of at least one carbonate and/or bicarbonate of ammonium, alkali and alkaline earth metals, said solution having a pH between about 8 and 10 and, b. separating the solids and liquids from each other. Preferably the regeneration treatment is in two steps wherein step (a) is carried out with an aqueous alcoholic carbonate solution containing lower alkyl alcohol, and, steps (a) and (b) are repeated using a bicarbonate.

Fish, Richard H. (Berkeley, CA)

1985-01-01T23:59:59.000Z

350

Photoacoustic removal of occlusions from blood vessels  

DOE Patents (OSTI)

Partial or total occlusions of fluid passages within the human body are removed by positioning an array of optical fibers in the passage and directing treatment radiation pulses along the fibers, one at a time, to generate a shock wave and hydrodynamics flows that strike and emulsify the occlusions. A preferred application is the removal of blood clots (thrombin and embolic) from small cerebral vessels to reverse the effects of an ischemic stroke. The operating parameters and techniques are chosen to minimize the amount of heating of the fragile cerebral vessel walls occurring during this photo acoustic treatment. One such technique is the optical monitoring of the existence of hydrodynamics flow generating vapor bubbles when they are expected to occur and stopping the heat generating pulses propagated along an optical fiber that is not generating such bubbles.

Visuri, Steven R. (Livermore, CA); Da Silva, Luiz B. (Danville, CA); Celliers, Peter M. (Berkeley, CA); London, Richard A. (Orinda, CA); Maitland, IV, Duncan J. (Lafayette, CA); Esch, Victor C. (San Francisco, CA)

2002-01-01T23:59:59.000Z

351

Method of removing cesium from steam  

DOE Patents (OSTI)

The foregoing objects of the present invention are achieved by a method for removing radioactive cesium from a hot vapor, such as steam, by a technique wherein the cesium chemically reacts with a filtering material which retains the cesium without causing degradation of the filtering material. The method is carried out at temperatures in the range of from about 700{degree}F to about 1000{degree}F, and even higher, but it preferably is utilized at a temperature of at least about 800{degree}F. The method uses a silica glass which is preferably in the form of spheres as the filter material. The preferred material is a borosilicate glass (Pyrex). The degree of removal of the radioactive cesium from the hot steam or other vapor approaches 90 to 100%.

Carson, N.J. Jr.; Noland, R.A.; Ruther, W.E.

1990-12-02T23:59:59.000Z

352

Removal of Retired Alkali Metal Test Systems  

SciTech Connect

This paper describes the successful effort to remove alkali metals, alkali metal residues, and piping and structures from retired non-radioactive test systems on the Hanford Site. These test systems were used between 1965 and 1982 to support the Fast Flux Test Facility and the Liquid Metal Fast Breeder Reactor Program. A considerable volume of sodium and sodium-potassium alloy (NaK) was successfully recycled to the commercial sector; structural material and electrical material such as wiring was also recycled. Innovative techniques were used to safely remove NaK and its residues from a test system that could not be gravity-drained. The work was done safely, with no environmental issues or significant schedule delays.

Brehm, W. F.; Church, W. R.; Biglin, J. W.

2003-02-26T23:59:59.000Z

353

Acid treatment removes zinc sulfide scale restriction  

Science Conference Proceedings (OSTI)

This paper reports that removal of zinc sulfide (ZnS) scale with acid restored an offshore Louisiana well's production to original rates. The zinc sulfide scale was determined to be in the near well bore area. The selected acid had been proven to control iron sulfide (FeS) scales in sour wells without causing harm to surface production equipment, tubing, and other downhole hardware. The successful removal of the blockage re-established previous production rates with a 105% increase in flowing tubing pressure. On production for a number of months, a high rate, high-pressure offshore well was experiencing unusually rapid pressure and rate declines. A small sample of the restrictive material was obtained during the wire line operations. The well was subsequently shut in while a laboratory analysis determined that zinc sulfide was the major component of the obstruction.

Biggs, K. (Kerr McGee Corp., Lafayette, LA (US)); Allison, D. (Otis Engineering Corp., Lafayette, LA (US)); Ford, W.G.F. (Halliburton Co., Duncan, OK (United States))

1992-08-31T23:59:59.000Z

354

IMPROVED PROCESSES TO REMOVE NAPHTHENIC ACIDS  

Science Conference Proceedings (OSTI)

In the second year of this project, we continued our effort to develop low temperature decarboxylation catalysts and investigate the behavior of these catalysts at different reaction conditions. We conducted a large number of dynamic measurements with crude oil and model compounds to obtain the information at different reaction stages, which was scheduled as the Task2 in our work plan. We developed a novel adsorption method to remove naphthenic acid from crude oil using naturally occurring materials such as clays. Our results show promise as an industrial application. The theoretical modeling proposed several possible reaction pathways and predicted the reactivity depending on the catalysts employed. From all of these studies, we obtained more comprehensive understanding about catalytic decarboxylation and oil upgrading based on the naphthenic acid removal concept.

Aihua Zhang; Qisheng Ma; Kangshi Wang, William A. Goddard, Yongchun Tang

2005-05-05T23:59:59.000Z

355

Optimal evaluation of infectious medical waste disposal companies using the fuzzy analytic hierarchy process  

SciTech Connect

Ever since Taiwan's National Health Insurance implemented the diagnosis-related groups payment system in January 2010, hospital income has declined. Therefore, to meet their medical waste disposal needs, hospitals seek suppliers that provide high-quality services at a low cost. The enactment of the Waste Disposal Act in 1974 had facilitated some improvement in the management of waste disposal. However, since the implementation of the National Health Insurance program, the amount of medical waste from disposable medical products has been increasing. Further, of all the hazardous waste types, the amount of infectious medical waste has increased at the fastest rate. This is because of the increase in the number of items considered as infectious waste by the Environmental Protection Administration. The present study used two important findings from previous studies to determine the critical evaluation criteria for selecting infectious medical waste disposal firms. It employed the fuzzy analytic hierarchy process to set the objective weights of the evaluation criteria and select the optimal infectious medical waste disposal firm through calculation and sorting. The aim was to propose a method of evaluation with which medical and health care institutions could objectively and systematically choose appropriate infectious medical waste disposal firms.

Ho, Chao Chung, E-mail: ho919@pchome.com.tw [Department of Industrial Management, National Taiwan University of Science and Technology, Taipei, Taiwan (China)

2011-07-15T23:59:59.000Z

356

Process for removing mercury from aqueous solutions  

DOE Patents (OSTI)

A process for removing mercury from water to a level not greater than two parts per billion wherein an anion exchange material that is insoluble in water is contacted first with a sulfide containing compound and second with a compound containing a bivalent metal ion forming an insoluble metal sulfide. To this treated exchange material is contacted water containing mercury. The water containing not more than two parts per billion of mercury is separated from the exchange material.

Googin, John M. (Oak Ridge, TN); Napier, John M. (Oak Ridge, TN); Makarewicz, Mark A. (Knoxville, TN); Meredith, Paul F. (Knoxville, TN)

1986-01-01T23:59:59.000Z

357

Process for removing mercury from aqueous solutions  

DOE Patents (OSTI)

A process for removing mercury from water to a level not greater than two parts per billion wherein an anion exchange material that is insoluble in water is contacted first with a sulfide containing compound and second with a compound containing a bivalent metal ion forming an insoluble metal sulfide. To this treated exchange material is contacted water containing mercury. The water containing not more than two parts per billion of mercury is separated from the exchange material.

Googin, J.M.; Napier, J.M.; Makarewicz, M.A.; Meredith, P.F.

1985-03-04T23:59:59.000Z

358

Trojan PWR Decommissioning: Large Component Removal Project  

Science Conference Proceedings (OSTI)

While the decommissioning of large commercial nuclear plants in the United States is in its infancy, the technical challenges with associated radioactive waste management are clear. This report describes the removal and disposal of four steam generators and one pressurizer from the Trojan nuclear power plant, the first large PWR to be decommissioned in the United States. The report chronicles the problems, successes, and lessons learned in this project, which was completed on schedule and under budget in...

1997-09-29T23:59:59.000Z

359

Removal of iron from impure graphites  

DOE Green Energy (OSTI)

Iron-impregnated and ash-rich graphites have been purified by leaching with gaseous I/sub 2/ at 900/sup 0/C. With addition of H/sub 2/, the rate of removal of impurity iron can be markedly increased and becomes comparable to that obtained with Cl/sub 2/. I/sub 2/ has an advantage in that it can also volatilize Ca and perhaps Ba and Sr.

Growcock, F.B.; Heiser, J.

1979-01-01T23:59:59.000Z

360

Removal of copper from ferrous scrap  

DOE Patents (OSTI)

A process for removing copper from ferrous or other metal scrap in which the scrap is contacted with a polyvalent metal sulfide slag in the presence of an excess of copper-sulfide forming additive to convert the copper to copper sulfide which is extracted into the slag to provide a ratio of copper in the slag to copper in the metal scrap of at least about 10.

Blander, M.; Sinha, S.N.

1987-07-30T23:59:59.000Z

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Removal of copper from ferrous scrap  

DOE Patents (OSTI)

A process for removing copper from ferrous or other metal scrap in which the scrap is contacted with a polyvalent metal sulfide slag in the presence of an excess of copper-sulfide forming additive to convert the copper to copper sulfide which is extracted into the slag to provide a ratio of copper in the slag to copper in the metal scrap of at least about 10.

Blander, M.; Sinha, S.N.

1990-05-15T23:59:59.000Z

362

Process for removing sulfur from coal  

DOE Patents (OSTI)

A process is disclosed for the removal of divalent organic and inorganic sulfur compounds from coal and other carbonaceous material. A slurry of pulverized carbonaceous material is contacted with an electrophilic oxidant which selectively oxidizes the divalent organic and inorganic compounds to trivalent and tetravalent compounds. The carbonaceous material is then contacted with a molten caustic which dissolves the oxidized sulfur compounds away from the hydrocarbon matrix.

Aida, T.; Squires, T.G.; Venier, C.G.

1983-08-11T23:59:59.000Z

363

Removal of copper from ferrous scrap  

DOE Patents (OSTI)

A process for removing copper from ferrous or other metal scrap in which the scrap is contacted with a polyvalent metal sulfide slag in the presence of an excess of copper-sulfide forming additive to convert the copper to copper sulfide which is extracted into the slag to provide a ratio of copper in the slag to copper in the metal scrap of at least about 10.

Blander, Milton (12833 S. 82nd Ct., Palos Park, IL 60464); Sinha, Shome N. (5748 Drexel, 2A, Chicago, IL 60637)

1990-01-01T23:59:59.000Z

364

NETL: News Release - DOE Seeks Cost-Shared Research Proposals to Remove  

NLE Websites -- All DOE Office Websites (Extended Search)

March 20, 2000 March 20, 2000 DOE Seeks Cost-Shared Research Proposals to Remove Mercury From Coal-Fired Power Plants With the Environmental Protection Agency expected to decide in December whether to regulate mercury emissions from coal-burning boilers, the U.S. Department of Energy has kicked off a new effort to develop more affordable pollution control technologies that can remove mercury from power plant flue gases. The Energy Department, through its National Energy Technology Laboratory, has issued a solicitation offering up to $13 million over three years for industry proposals on cost-cutting mercury-control methods for coal-based power systems. Currently no technology exists that can uniformly control mercury from power plant flue gas emissions. The effectiveness of existing flue gas emission controls in removing mercury can vary considerably from plant to plant, or even from boiler to boiler. With today's technologies, mercury removal can range from essentially no control to as high as 90 percent.

365

Development of Disposable Sorbents for Chloride Removal from High-Temperature Coal-Derived Gases  

Science Conference Proceedings (OSTI)

The integrated coal-gasification combined-cycle approach is an efficient process for producing electric power from coal by gasification, followed by high-temperature removal of gaseous impurities, then electricity generation by gas turbines. Alternatively, molten carbonate fuel cells (MCFC) may be used instead of gas turbine generators. The coal gas must be treated to remove impurities such as hydrogen chloride (HCl), a reactive, corrosive, and toxic gas, which is produced during gasification from chloride species in the coal. HCl vapor must be removed to meet environmental regulations, to protect power generation equipments such as fuel cells or gas turbines, and to minimize deterioration of hot coal gas desulfurization sorbents. The objectives of this study are to: (1) investigate methods to fabricate reactive sorbent pellets or granules that are capable of reducing HCl vapor in high-temperature coal gas streams to less than 1 ppm in the temperature range 400{degrees}C to 650{degrees}C and the pressure range 1 to 20 atm; (2) testing their suitability in bench-scale fixed- or fluidized-bed reactors; (3) testing a superior sorbent in a circulating fluidized- bed reactor using a gas stream from an operating coal gasifier; and (4) updating the economics of high temperature HCl removal.

Krishnan, G.N.; Canizales, A. [SRI International, Menlo Park, CA (United States); Gupta, R. [Research Triangle Inst., Research Triangle Park, NC (United States); Ayala, R. [General Electric Co., Schenectady, NY (United States). Corporate Research and Development Center

1996-12-31T23:59:59.000Z

366

Treated bottom ash medium and method of arsenic removal from drinking water  

DOE Patents (OSTI)

A method for low-cost arsenic removal from drinking water using chemically prepared bottom ash pre-treated with ferrous sulfate and then sodium hydroxide. Deposits on the surface of particles of bottom ash form of activated iron adsorbent with a high affinity for arsenic. In laboratory tests, a miniscule 5 grams of pre-treated bottom ash was sufficient to remove the arsenic from 2 liters of 2400 ppb (parts per billion) arsenic-laden water to a level below 50 ppb (the present United States Environmental Protection Agency limit). By increasing the amount of pre-treated bottom ash, even lower levels of post-treatment arsenic are expected. It is further expected that this invention supplies a very low-cost solution to arsenic poisoning for large population segments.

Gadgil, Ashok (El Cerrito, CA)

2009-06-09T23:59:59.000Z

367

FAQS Reference Guide Radiation Protection  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide has been developed to address the competency statements in the December 2003 edition of DOE-STD-1174-2003, Radiation Protection Functional Area Qualification Standard.

368

Vintage Capital and Creditor Protection  

E-Print Network (OSTI)

We provide novel evidence linking the level of creditor protection provided by law to the degree of usage of technologically older, vintage capital in the airline industry. Using a panel of aircraft-level data around the ...

Benmelech, Efraim

369

The costs of environmental protection  

E-Print Network (OSTI)

Recently, some have argued that tougher environmental policies can create jobs, stimulate innovation, and enhance competitiveness. On this view, economic side effects make environmental protection a sort of green free ...

Schmalensee, Richard

1993-01-01T23:59:59.000Z

370

LBNL/ Adopt Fall Protection Program  

NLE Websites -- All DOE Office Websites (Extended Search)

is the Company Letter Certification Template to address if your company has decided to work under LBNL fall protection program. See attached Chapter 30 of our program of PUB...

371

INSTRUCTIONS FOR FILING A WITHDRAWAL with APPROVED EXCUSE Non-Medical and Medical  

E-Print Network (OSTI)

1 INSTRUCTIONS FOR FILING A WITHDRAWAL with APPROVED EXCUSE Non-Medical and Medical Withdraw with Approved Excuse ­ Non-Medical Withdraw with Approved Excuse - Medical Step 1: Attach a statement to page 1 your reasons for seeking a Withdrawal with Approved Excuse for Medical Reasons. Include the last date

Boufadel, Michel

372

Medical Guidelines Reconciling Medical Software and Electronic Devices: Imatinib Case-study  

E-Print Network (OSTI)

Medical Guidelines Reconciling Medical Software and Electronic Devices: Imatinib Case-study Alena.demicheli@epfl.ch Abstract--Nowadays medical software is tightly coupled with medical devices that perform patient state monitoring and lately even some basic treatment procedures. Medical guidelines (GLs) can be seen

De Micheli, Giovanni

373

2012 Entering Medical Class: Allopathic Medical Schools (48) to which 142 Penn State applicants matriculated  

E-Print Network (OSTI)

2012 Entering Medical Class: Allopathic Medical Schools (48) to which 142 Penn State applicants University Georgetown University * Jefferson Medical College ­ 38 Marshall University Medical University UMDNJ ­ New Jersey Medical School University of Arizona College of Medicine ­ Phoenix campus University

dePamphilis, Claude

374

H. UCSF/FRESNO MEDICAL EDUCATION PROGRAM H. UCSF/FRESNO MEDICAL EDUCATION PROGRAM  

E-Print Network (OSTI)

H. UCSF/FRESNO MEDICAL EDUCATION PROGRAM 165 H. UCSF/FRESNO MEDICAL EDUCATION PROGRAM BACKGROUND UCSF established a regional medical education program in Fresno in 1975 to provide training for doctors Medical Center, Fresno County Hospital, Fresno Community Hospital, Valley Medical Center and Kaiser

Mullins, Dyche

375

(09)UC/05 BSc(Hons) Medical Physics/11 Bachelor of Science (Honours) Medical Physics  

E-Print Network (OSTI)

(09)UC/05 ­ BSc(Hons) Medical Physics/11 Bachelor of Science (Honours) Medical Physics 2005 Calendar, pages 348 and 681 (09)UC/05 ­ BSc(Hons) Medical Physics/1 Section A 1. Purpose of proposal To provide a better pathway for PhD students in Medical Physics, a BSc(Hons) degree in Medical Physics

Hickman, Mark

376

MEDICAL COLLEGE OF WISCONSIN AFFILIATED HOSPITALS, INC. Registrar Confirmation of Medical School Graduation form  

E-Print Network (OSTI)

MEDICAL COLLEGE OF WISCONSIN AFFILIATED HOSPITALS, INC. Registrar Confirmation of Medical School Graduation form The Medical College of Wisconsin Affiliated Hospitals, Inc (MCWAH) requires primary verification of your medical school graduation. Please complete and send this form to your Medical School

377

MEDICAL EDUCATION Medical Students Speak: A Two-Voice Comment on  

E-Print Network (OSTI)

MEDICAL EDUCATION Medical Students Speak: A Two-Voice Comment on Learning Professionalism We are two medical students. For one of us, medical school is just beginning; for the other, it is important to understand how medical students today view professionalism and how such a construct

Maxwell, Bruce D.

378

Inspection Report on "Internal Controls over Accountable Classified Removable Electronic Media at Oak Ridge National Laboratory"  

SciTech Connect

The Department of Energy's Oak Ridge National Laboratory (ORNL) conducts cutting edge scientific research. ORNL utilizes removable electronic media, such as computer hard drives, compact disks, data tapes, etc., to store vast amounts of classified information. Incidents involving breakdowns in controls over classified removable electronic media have been a continuous challenge for the Department. The loss of even one piece of such media can have serious national security implications. In 2004, the Department had a complex-wide 'stand-down' of all activities using classified removable electronic media, and such media containing Secret/Restricted Data or higher classified data was designated 'Accountable Classified Removable Electronic Media' (ACREM). As part of the stand-down, sites were required to conduct a 100 percent physical inventory of all ACREM; enter it all into accountability; and conduct security procedure reviews and training. Further, the Department implemented a series of controls, including conducting periodic inventories, utilizing tamper proof devices on ACREM safes, and appointing trained custodians to be responsible for the material. After performance testing and validation that the required accountability systems were in place, ACREM operations at ORNL were approved for restart on August 10, 2004. We conducted a review at ORNL and associated facilities to determine whether ACREM is managed, protected, and controlled consistent with applicable requirements. We found that: (1) Eight pieces of Secret/Restricted Data media had not been identified as ACREM and placed into a system of accountability. Consequently, the items were not subject to all required protections and controls, such as periodic accountability inventories, oversight by a trained custodian, or storage in a designated ACREM safe. (However, the items were secured in safes approved for classified material.) (2) Other required ACREM protections and controls were not implemented as follows: a tamper indicating device was not being used on an ACREM safe; records documenting when a certain safe was opened did not support that a purported inventory had been conducted; and a safe inventory had not been completed in a timely manner. (3) A Personal Digital Assistant and a thumb drive, both capable of recording or transmitting data, were stored in a security area without an analysis to identify vulnerabilities and compensatory measures having been conducted, as required. We also found that an ORNL Cooperative Research and Development Agreement partner had not disabled classified computer ports at the partner's site that were capable of writing classified information to external or removable media, as required. We made several recommendations designed to enhance the security of ACREM, security areas, and computers.

None

2009-05-01T23:59:59.000Z

379

Energy Department and Environmental Protection Agency Release...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Protection Agency Release Fuel Economy Tool for Used Vehicles Energy Department and Environmental Protection Agency Release Fuel Economy Tool for Used Vehicles...

380

Protecting Intelligent Distributed Power Grids Against Cyber...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Protecting Intelligent Distributed Power Grids Against Cyber Attacks - May 2008 Protecting Intelligent Distributed Power Grids Against Cyber Attacks - May 2008 Development of a...

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Changes related to "Environmentally Protective Power Generation...  

Open Energy Info (EERE)

page on Facebook icon Twitter icon Changes related to "Environmentally Protective Power Generation EPPG" Environmentally Protective Power Generation EPPG Jump to:...

382

CRITICAL INFRASTRUCTURE PROTECTION Multiple Efforts to Secure...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CRITICAL INFRASTRUCTURE PROTECTION Multiple Efforts to Secure Control Systems Are Under Way, but Challenges Remain CRITICAL INFRASTRUCTURE PROTECTION Multiple Efforts to Secure...

383

10 CFR 835- Occupational Radiation Protection  

Energy.gov (U.S. Department of Energy (DOE))

The rules in this part establish radiation protection standards, limits, and program requirements for protecting individuals from ionizing radiation resulting from the conduct of DOE activities.

384

Code of Federal Regulations OCCUPATIONAL RADIATION PROTECTION  

Energy.gov (U.S. Department of Energy (DOE))

The rules in this part establish radiation protection standards, limits, and program requirements for protecting individuals from ionizing radiation resulting from the conduct of DOE activities.

385

Environmental Management and Protection Act, 2010 (Saskatchewan)  

Energy.gov (U.S. Department of Energy (DOE))

The Environmental Management and Protection Act of 2010 protects air, land, water resources and ecosystems of the province by managing and regulating potentially harmful activities and substances....

386

Networks, deregulation, and risk : the politics of critical infrastructure protection  

E-Print Network (OSTI)

Standards for Critical Infrastructure Protection. Docket RMStandards for Critical Infrastructure Protection. Docket RM2- 13; GAO. ?Critical Infrastructure Protection: Multiple

Ellis, Ryan Nelson

2011-01-01T23:59:59.000Z

387

Shape memory polymer medical device  

SciTech Connect

A system for removing matter from a conduit. The system includes the steps of passing a transport vehicle and a shape memory polymer material through the conduit, transmitting energy to the shape memory polymer material for moving the shape memory polymer material from a first shape to a second and different shape, and withdrawing the transport vehicle and the shape memory polymer material through the conduit carrying the matter.

Maitland, Duncan (Pleasant Hill, CA); Benett, William J. (Livermore, CA); Bearinger, Jane P. (Livermore, CA); Wilson, Thomas S. (San Leandro, CA); Small, IV, Ward (Livermore, CA); Schumann, Daniel L. (Concord, CA); Jensen, Wayne A. (Livermore, CA); Ortega, Jason M. (Pacifica, CA); Marion, III, John E. (Livermore, CA); Loge, Jeffrey M. (Stockton, CA)

2010-06-29T23:59:59.000Z

388

NorthStar Medical Technologies LLC  

National Nuclear Security Administration (NNSA)

Environmental Assessment for Environmental Assessment for NorthStar Medical Technologies LLC Commercial Domestic Production of the Medical Isotope Molybdenum-99 (DOE/EA-1929) Prepared for U.S. Department of Energy National Nuclear Security Administration Defense Nuclear Nonproliferation/ Global Threat Reduction Initiative August 2012 EA for NorthStar Medical Technologies LLC Commercial Domestic Production of the Medical Isotope Mo-99 i COVER SHEET ENVIRONMENTAL ASSESSMENT FOR NORTHSTAR MEDICAL TECHNOLOGIES LLC COMMERCIAL DOMESTIC PRODUCTION OF THE MEDICAL ISOTOPE MOLYBDENUM-99 Proposed Action: The Department of Energy (DOE) National Nuclear Security Administration (NNSA) proposes to provide funding to NorthStar to accelerate the establishment of the commercial production of

389

Nitrogen Removal From Low Quality Natural Gas  

SciTech Connect

Natural gas provides more than one-fifth of all the primary energy used in the United States. It is especially important in the residential sector, where it supplies nearly half of all the energy consumed in U.S. homes. However, significant quantities of natural gas cannot be produced economically because its quality is too low to enter the pipeline transportation system without some type of processing, other than dehydration, to remove the undesired gas fraction. Such low-quality natural gas (LQNG) contains significant concentration or quantities of gas other than methane. These non- hydrocarbons are predominantly nitrogen, carbon dioxide, and hydrogen sulfide, but may also include other gaseous components. The nitrogen concentrations usually exceeds 4%. Nitrogen rejection is presently an expensive operation which can present uneconomic scenarios in the potential development of natural gas fields containing high nitrogen concentrations. The most reliable and widely used process for nitrogen rejection from natural gas consists of liquefying the feed stream using temperatures in the order of - 300{degrees}F and separating the nitrogen via fractionation. In order to reduce the gas temperature to this level, the gas is compressed, cooled by mullet-stream heat exchangers, and expanded to low pressure. Significant energy for compression and expensive materials of construction are required. Water and carbon dioxide concentrations must be reduced to levels required to prevent freezing. SRI`s proposed research involves screening new nitrogen selective absorbents and developing a more cost effective nitrogen removal process from natural gas using those compounds. The long-term objective of this project is to determine the technical and economical feasibility of a N{sub 2}2 removal concept based on complexation of molecular N{sub 2} with novel complexing agents. Successful development of a selective, reversible, and stable reagent with an appropriate combination of capacity and N{sub 2} absorption/desorption characteristics will allow selective separation of N{sub 2} from LQNG.

Alvarado, D.B.; Asaro, M.F.; Bomben, J.L.; Damle, A.S.; Bhown, A.S.

1997-10-01T23:59:59.000Z

390

Data Protection The Data Protection Act 1984 has now been replaced by the Data Protection Act 1998,  

E-Print Network (OSTI)

Data Protection The Data Protection Act 1984 has now been replaced by the Data Protection Act 1998, which is based on the European Data Protection Directive. The 1998 Act applies to both manual for privacy and access by individuals. Information on how to make a request for access to personal data under

Priestley, Hilary

391

Method for removal of methane from coalbeds  

DOE Patents (OSTI)

A method for removing methane gas from underground coalbeds prior to mining the coal which comprises drilling at least one borehole from the surface into the coalbed. The borehole is started at a slant rather than directly vertically, and as it descends, a gradual curve is followed until a horizontal position is reached where the desired portion of the coalbed is intersected. Approaching the coalbed in this manner and fracturing the coalbed in the major natural fraction direction cause release of large amounts of the trapped methane gas.

Pasini, III, Joseph (Morgantown, WV); Overbey, Jr., William K. (Morgantown, WV)

1976-01-01T23:59:59.000Z

392

Process for selected gas oxide removal by radiofrequency catalysts  

DOE Patents (OSTI)

This process to remove gas oxides from flue gas utilizes adsorption on a char bed subsequently followed by radiofrequency catalysis enhancing such removal through selected reactions. Common gas oxides include SO.sub.2 and NO.sub.x.

Cha, Chang Y. (3807 Reynolds St., Laramie, WY 82070)

1993-01-01T23:59:59.000Z

393

Process for removing technetium from iron and other metals  

DOE Patents (OSTI)

A process for removing technetium from iron and other metals comprises the steps of converting the molten, alloyed technetium to a sulfide dissolved in manganese sulfide, and removing the sulfide from the molten metal as a slag. 4 figs.

Leitnaker, J.M.; Trowbridge, L.D.

1999-03-23T23:59:59.000Z

394

Process for removing technetium from iron and other metals  

DOE Patents (OSTI)

A process for removing technetium from iron and other metals comprises the steps of converting the molten, alloyed technetium to a sulfide dissolved in manganese sulfide, and removing the sulfide from the molten metal as a slag.

Leitnaker, James M. (Kingston, TN); Trowbridge, Lee D. (Oak Ridge, TN)

1999-01-01T23:59:59.000Z

395

Removing nuclear waste, one shipment at a time  

NLE Websites -- All DOE Office Websites (Extended Search)

Stories Removing nuclear waste, one shipment at a time Removing nuclear waste, one shipment at a time The Lab's 1,000th shipment of transuranic waste recently left Los Alamos,...

396

DOE removes all remaining HEU from Hungary | National Nuclear...  

National Nuclear Security Administration (NNSA)

NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > DOE removes all remaining HEU from Hungary DOE removes all remaining HEU...

397

Thermal manipulator of medical catheters  

DOE Patents (OSTI)

This invention consists of a maneuverable medical catheter comprising a flexible tube having a functional tip. The catheter is connected to a control source. The functional tip of the catheter carries a plurality of temperature activated elements arranged in parallel and disposed about the functional tip and held in spaced relation at each end. These elements expand when they are heated. A plurality of fiber optic bundles, each bundle having a proximal end attached to the control source and a distal end attached to one of the elements carry light into the elements where the light is absorbed as heat. By varying the optic fiber that is carrying the light and the intensity of the light, the bending of the elements can be controlled and thus the catheter steered. In an alternate embodiment, the catheter carries a medical instrument for gathering a sample of tissue. The instrument may also be deployed and operated by thermal expansion and contraction of its moving parts.

Chastagner, P.

1991-03-04T23:59:59.000Z

398

Removal of Fluoride from Waste Water of Aluminium Smelter by ...  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, 2011 TMS Annual Meeting & Exhibition. Symposium , General Abstracts: Light Metals Division. Presentation Title, Removal of...

399

Method for removing fluoride contamination from nitric acid  

DOE Patents (OSTI)

Fluoride ions are removed from nitric acid solution by contacting the vaporized solution with alumina or zirconium.

Pruett, David J. (Knoxville, TN); Howerton, William B. (Kingston, TN)

1982-01-01T23:59:59.000Z

400

Removing Pollutants from Water, Solar Energy - Programmaster.org  

Science Conference Proceedings (OSTI)

Aug 5, 2013 ... B. Materials for the Environment: Removing Pollutants from Water, Solar Energy Program Organizers: Fernand Marquis, Naval Postgraduate...

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Powder Removal from Complex Structures Produced Using Electron ...  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2011. Symposium, Additive Manufacturing of Metals. Presentation Title, Powder Removal from...

402

GTRI's Nuclear and Radiological Material Removal | National Nuclear...  

National Nuclear Security Administration (NNSA)

Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our...

403

Removal of Inclusions from Solar Grade Silicon Using ...  

Science Conference Proceedings (OSTI)

Polysilicon in Photovoltaics: Market Conditions & Competing PV Technologies ... Removal of Inclusions from Solar Grade Silicon Using Electromagnetic Field.

404

Modified Bayer Process for Alumina Removal from Hanford Waste  

AREVA NC Inc. Modified Bayer Process for Alumina Removal from Hanford Waste January 24, 2007 Don Geniesse AREVA NC Inc.

405

Converting Energy to Medical Progress  

Office of Scientific and Technical Information (OSTI)

Converting Converting to April 2001 An introduction to the unique research funded by the Medical Sciences Division Biological and Environmental Research (BER) Office of Science, U.S. Department of Energy Nuclear Medicine E v e r y w h e r e i n He a l t h c a r e A n d s o do e s B E R N u c l e a r M e d i c i n e H e lps P a t i e n t s the Office of Biological and Environmental Research (BER) of the United States Department of Energy (DOE) has been investing to advance environmental and biomedical knowledge connected to energy. The BER Medical Sciences program fosters research to develop beneficial applications of nuclear technologies for medical diagnosis and treatment of many diseases. Today, nuclear medicine helps millions of patients annually in the United States. Nearly every nuclear medicine scan or test used today was made possible by

406

Converting Energy to Medical Progress  

NLE Websites -- All DOE Office Websites (Extended Search)

Converting Converting to April 2001 An introduction to the unique research funded by the Medical Sciences Division Biological and Environmental Research (BER) Office of Science, U.S. Department of Energy Nuclear Medicine E v e r y w h e r e i n He a l t h c a r e A n d s o do e s B E R N u c l e a r M e d i c i n e H e lps P a t i e n t s the Office of Biological and Environmental Research (BER) of the United States Department of Energy (DOE) has been investing to advance environmental and biomedical knowledge connected to energy. The BER Medical Sciences program fosters research to develop beneficial applications of nuclear technologies for medical diagnosis and treatment of many diseases. Today, nuclear medicine helps millions of patients annually in the United States. Nearly every nuclear medicine scan or test used today was made possible by

407

Medical ice slurry production device  

DOE Patents (OSTI)

The present invention relates to an apparatus for producing sterile ice slurries for medical cooling applications. The apparatus is capable of producing highly loaded slurries suitable for delivery to targeted internal organs of a patient, such as the brain, heart, lungs, stomach, kidneys, pancreas, and others, through medical size diameter tubing. The ice slurry production apparatus includes a slurry production reservoir adapted to contain a volume of a saline solution. A flexible membrane crystallization surface is provided within the slurry production reservoir. The crystallization surface is chilled to a temperature below a freezing point of the saline solution within the reservoir such that ice particles form on the crystallization surface. A deflector in the form of a reciprocating member is provided for periodically distorting the crystallization surface and dislodging the ice particles which form on the crystallization surface. Using reservoir mixing the slurry is conditioned for easy pumping directly out of the production reservoir via medical tubing or delivery through other means such as squeeze bottles, squeeze bags, hypodermic syringes, manual hand delivery, and the like.

Kasza, Kenneth E. (Palos Park, IL); Oras, John (Des Plaines, IL); Son, HyunJin (Naperville, IL)

2008-06-24T23:59:59.000Z

408

Glossary of Health Coverage and Medical Terms  

NLE Websites -- All DOE Office Websites (Extended Search)

Glossary of Health Coverage and Medical Terms Page 1 of 4 Glossary of Health Coverage and Medical Terms * This glossary has many commonly used terms, but isn't a full list. These...

409

CRC Handbook of Medical Physics, vol. 3  

Science Conference Proceedings (OSTI)

In this work, the care and testing of measurement and diagnostic instruments are described in detail. Difficulties encountered with therapeutic and diagnostic calibrations are explored and solutions are suggested. VOLUME III Physics Teaching for Radiologic Technologists, Physics Teaching for Diagnostic Radiology Residents, Physics Teaching for Nuclear Medicine Residents, Physics Teaching for Radiotherapy Residents, Degree Programs in Medical Physics, Radiobiology Teaching, Non-Degree Medical Physics Training and American Board of Radiology Certifications, Radioactivity and Production of Medical Isotopes, Practical Medical Physics Consulting, Radiologic Terminology, Nuclear Medicine Imaging Techniques, Description of Radiotherapy Procedures, Medical Applications of Ultrasonography and Thermography, Glossary of Medical and Anatomical Terms Used in Medical Physics, Equipment List for Medical Physics and Acquisition Priority. Bibliography of Reference Materials. Index.

Waggener, R.G.; Kereiakes, J.G.; Shalek, R.J.

1984-01-01T23:59:59.000Z

410

ENERGY STAR Score for Medical Offices  

NLE Websites -- All DOE Office Websites (Extended Search)

July 2013 ENERGY STAR Score for Medical Offices in the United States Page 1 ENERGY STAR Score for Medical Offices in the United States Technical Reference OVERVIEW The ENERGY STAR...

411

Removal of arsenic compounds from petroliferous liquids  

DOE Patents (OSTI)

The present invention in one aspect comprises a process for removing arsenic from petroliferous-derived liquids by contacting said liquid with a divinylbenzene-crosslinked polystyrene polymer (i.e. PS-DVB) having catechol ligands anchored to said polymer, said contacting being at an elevated temperature. In another aspect, the invention is a process for regenerating spent catecholated polystyrene polymer by removal of the arsenic bound to it from contacting petroliferous liquid in accordance with the aspect described above which regenerating process comprises: (a) treating said spent catecholated polystyrene polymer with an aqueous solution of at least one member selected from the group consisting of carbonates and bicarbonates of ammonium, alkali metals, and alkaline earth metals, said solution having a pH between about 8 and 10, and said treating being at a temperature in the range of about 20/sup 0/ to 100/sup 0/C; (b) separating the solids and liquids from each other. In a preferred embodiment the regeneration treatment is in two steps wherein step: (a) is carried out with an aqueous alcoholic carbonate solution which includes at least one lower alkyl alcohol, and, steps (c) and (d) are added. Steps (c) and (d) comprise: (c) treating the solids with an aqueous alcoholic solution of at least one ammonium, alkali or alkaline earth metal bicarbonate at a temperature in the range of about 20 to 100/sup 0/C; and (d) separating the solids from the liquids.

Fish, R.H.

1984-04-06T23:59:59.000Z

412

Surface Protection for Enhanced Materials Performance: Science ...  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2013. Symposium, Surface Protection for Enhanced Materials Performance: Science,...

413

Protecting users of the cyber commons  

Science Conference Proceedings (OSTI)

Establish a global cyber "neighborhood watch" enabling users to take defensive action to protect their operations.

Stephen J. Lukasik

2011-09-01T23:59:59.000Z

414

TYPE A VERIFICATION FOR THE HIGH FLUX BEAM REACTOR UNDERGROUND UTILITIES REMOVAL PHASE 2 DF WASTE LINE REMOVAL, BNL  

SciTech Connect

5098-SR-02-0 PROJECT-SPECIFIC TYPE A VERIFICATION FOR THE HIGH FLUX BEAM REACTOR UNDERGROUND UTILITIES REMOVAL PHASE 2 DF WASTE LINE REMOVAL, BROOKHAVEN NATIONAL LABORATORY

P.C. Weaver

2010-07-09T23:59:59.000Z

415

NIST Medical-Industrial Radiation Facility  

Science Conference Proceedings (OSTI)

Medical-Industrial Radiation Facility. ... Radiation hardness testing; Electron-beam sterilization; Beam diagnostics; Industrial CT scanning. ...

416

BMC Medical Education BioMed Central  

E-Print Network (OSTI)

Research article Life satisfaction and resilience in medical school a six-year longitudinal, nationwide and comparative study

Kari Kjeldstadli; Reidar Tyssen; Arnstein Finset; Erlend Hem; Tore Gude; Nina T Gronvold; Oivind Ekeberg; Per Vaglum

2006-01-01T23:59:59.000Z

417

Titanium/Polymer Sandwich for Medical Applications  

Science Conference Proceedings (OSTI)

Presentation Title, Titanium/Polymer Sandwich for Medical Applications. Author(s ) ... Biocompatible Nanoparticle Materials in Cancer Research Bioinspired...

418

Panel on Economic Incentives for Medical Device ...  

Science Conference Proceedings (OSTI)

... and safety, reduced energy consumption, faster performance ... Kevin works on energy-aware software ... of Harvard Medical School, Microsoft Research ...

2012-02-10T23:59:59.000Z

419

Independent Activity Report, Washington River Protection Solutions -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Washington River Protection Solutions Washington River Protection Solutions - September 2010 Independent Activity Report, Washington River Protection Solutions - September 2010 September 2010 Participation in the Washington River Protection Solutions, LLC Integrated Safety Management System Annual Review The U.S. Department of Energy, Office of Independent Oversight, within the Office of Health, Safety and Security (HSS), participated in the review of the Washington River Protection Solutions, LLC Integrated Safety Management System Annual Review for 2010. The review was conducted during the period of August 23 to September 2, 2010, and focused on six functional areas: corrective action management, work planning and control, radiological protection, environmental protection, emergency preparedness, and

420

Federal Energy Management Program: Environmental Protection Agency -  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Environmental Protection Agency - Edison, New Jersey to someone by E-mail Share Federal Energy Management Program: Environmental Protection Agency - Edison, New Jersey on Facebook Tweet about Federal Energy Management Program: Environmental Protection Agency - Edison, New Jersey on Twitter Bookmark Federal Energy Management Program: Environmental Protection Agency - Edison, New Jersey on Google Bookmark Federal Energy Management Program: Environmental Protection Agency - Edison, New Jersey on Delicious Rank Federal Energy Management Program: Environmental Protection Agency - Edison, New Jersey on Digg Find More places to share Federal Energy Management Program: Environmental Protection Agency - Edison, New Jersey on AddThis.com... Energy-Efficient Products

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

1993 Radiation Protection Workshop: Proceedings  

SciTech Connect

The 1993 DOE Radiation Protection Workshop was conducted from April 13 through 15, 1993 in Las Vegas, Nevada. Over 400 Department of Energy Headquarters and Field personnel and contractors from the DOE radiological protection community attended the Workshop. Forty-nine papers were presented in eleven separate sessions: Radiological Control Manual Implementation, New Approaches to Instrumentation and Calibration, Radiological Training Programs and Initiatives, External Dosimetry, Internal Dosimetry, Radiation Exposure Reporting and Recordkeeping, Air Sampling and Monitoring Issues, Decontamination and Decommissioning of Sites, Contamination Monitoring and Control, ALARA/Radiological Engineering, and Current and Future Health Physics Research. Individual papers are indexed separately on the database.

Not Available

1993-12-31T23:59:59.000Z

422

Diagnostic Medical Sonography Clinical Technical Standards  

E-Print Network (OSTI)

Diagnostic Medical Sonography Clinical Technical Standards Listed below are the technical standards identified for students in the Diagnostic Medical Sonography (DMS) clinical program. Review each standard and communicate effectively. Smell Be able to detect electrical hazards inherent in medical equipment Speech

Barrash, Warren

423

Medical Insurance An overview for active employees  

E-Print Network (OSTI)

Your UC Medical Insurance An overview for active employees #12;Agenda · Your Options · Pre-paid medical · Other Insurance Plans · Conclusion #12;Your Options #12;Your options · UC offers four types of medical plan o HMO plans (4) o POS plan o PPO plans (2) o FFS plan · Availability determined by zip code o

Burke, Peter

424

MEDICAL EVACUATION IN A THEATER OF  

E-Print Network (OSTI)

FM 8-10-6 MEDICAL EVACUATION IN A THEATER OF OPERATIONS HEADQUARTERS, DEPARTMENT OF THE ARMY APRIL 2000 MEDICAL EVACUATION IN A THEATER OF OPERATIONS TACTICS, TECHNIQUES, AND PROCEDURES TABLE ......................................................................................................... xi CHAPTER 1. INTRODUCTION TO THE COMBAT HEALTH SUPPORT SYSTEM AND MEDICAL EVACUATION

US Army Corps of Engineers

425

Medical Examination Office of Human Resources  

E-Print Network (OSTI)

Medical Examination 4.40 Office of Human Resources Applies to: Faculty, staff, graduate associates or graduate associate or prospective employee or graduate associate to undergo medical examination or utensils, or food-contact surfaces. Policy Details I. Current Employees A job-related medical examination

Howat, Ian M.

426

wwwwww..ccoommmmuunniittyy..hhaarrvvaarrdd..eedduu Harvard Medical  

E-Print Network (OSTI)

·· wwwwww..ccoommmmuunniittyy..hhaarrvvaarrdd..eedduu ·· Harvard Medical School students help local are learning about science and medi- cine by working with Harvard Medical School (HMS) student volunteers who realize that a career in sci- ence is something they can achieve. At Girl Power, where medical and dental

427

Postgraduate Medical Education PGME MISSION STATEMENT  

E-Print Network (OSTI)

Postgraduate Medical Education PGME MISSION STATEMENT FACULTY OF MEDICINE ­ VISION Creating the future of health. FACULTY OF MEDICINE ­ MISSION An innovative medical school committed to excellence and leadership in education, research, and service to society. INTRODUCTION Postgraduate Medical Education

Habib, Ayman

428

Power Conditioning and Protection for Sensitive Electronic Medical Equipment Using Uninterruptible Power Supplies  

Science Conference Proceedings (OSTI)

This system compatibility test data describes how each of nine different model uninterruptible power supplies (UPSs) mitigate capacitor-switching, oscillatory, and impulsive voltage transients common to many healthcare facilities. Also included in this set of system compatibility test data is a step wise procedure that can be used to size a UPS for a single-phase piece of sensitive electronic equipment.

2003-12-31T23:59:59.000Z

429

Massive Hanford Test Reactor Removed- Plutonium Recycle Test Reactor removed from Hanfords 300 Area  

Energy.gov (U.S. Department of Energy (DOE))

RICHLAND, WA Hanfords River Corridor contractor, Washington Closure Hanford, has met a significant cleanup challenge on the U.S. Department of Energys (DOE) Hanford Site by removing a 1,082-ton nuclear test reactor from the 300 Area.

430

Arsenic removal and stabilization by synthesized pyrite  

E-Print Network (OSTI)

Arsenic is ubiquitous whether it is naturally occurring or produced by humans. It is found at sites on the National Priority List and at sites operated by DOE, where it is the second most commonly found contaminant. More wastes containing arsenic will be produced due to the lowering of the Maximum Contaminant Level (MCL) for arsenic in drinking water which will result in more treatment facilities for arsenic removal that will generate residuals. Furthermore, arsenic can be released from such wastes under the reduced conditions that are found in landfills. Pyrite (FeS2) is believed to be a compound that has a high affinity for arsenic and is stable under anoxic conditions. The first task of this research was to develop a method for making pyrite crystals of defined size with minimal reaction time and at high yield. Effects on the synthesis of pyrite particles of pH, the ratio of Fe/S, temperature and reaction time were investigated in batch reactor systems. Pyrite was synthesized within 24 hours at pH values ranging from pH 3.6 through pH 5.6, and at a ratio of Fe/S of 0.5. X-ray diffraction and scanning electron microscopy were used to size and characterize the pyrite particles. Experimental and analytical procedures developed for this work, included a hydride generation atomic absorption spectrometry method for measuring arsenic species (As(III), As(V)). The synthesized pyrite was applied to remove arsenic and its maximum capacity for arsenic removal was measured in batch adsorption experiments to be 3.23 ?mol/g for As(III) and 113 ?mol/g for As(V). Information obtained on the characteristics of chemical species before and after the reaction with arsenic showed that iron and sulfur were oxidized. Last, how strongly arsenic was bound to pyrite was investigated and it was determined that release of arsenic from As(III)-pyrite is not affected by pH, but release from As(V)-pyrite is affected by pH with minimum release in the range pH 5 to pH 8.

Song, Jin Kun

2008-12-01T23:59:59.000Z

431

Hanford Deep Dig Removes Contaminated Soil | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hanford Deep Dig Removes Contaminated Soil Hanford Deep Dig Removes Contaminated Soil Hanford Deep Dig Removes Contaminated Soil March 11, 2013 - 12:00pm Addthis An aerial view of Hanford’s D Area shows the D Reactor (lower left) and DR Reactor. Workers are digging 85 feet to groundwater at two sites there to remove chromium contamination. An aerial view of Hanford's D Area shows the D Reactor (lower left) and DR Reactor. Workers are digging 85 feet to groundwater at two sites there to remove chromium contamination. Workers remove soil contaminated with sodium dichromate to prevent the chemical from reaching the groundwater and eventually the Columbia River. Workers remove soil contaminated with sodium dichromate to prevent the chemical from reaching the groundwater and eventually the Columbia River.

432

Hanford Deep Dig Removes Contaminated Soil | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deep Dig Removes Contaminated Soil Deep Dig Removes Contaminated Soil Hanford Deep Dig Removes Contaminated Soil March 11, 2013 - 12:00pm Addthis An aerial view of Hanford’s D Area shows the D Reactor (lower left) and DR Reactor. Workers are digging 85 feet to groundwater at two sites there to remove chromium contamination. An aerial view of Hanford's D Area shows the D Reactor (lower left) and DR Reactor. Workers are digging 85 feet to groundwater at two sites there to remove chromium contamination. Workers remove soil contaminated with sodium dichromate to prevent the chemical from reaching the groundwater and eventually the Columbia River. Workers remove soil contaminated with sodium dichromate to prevent the chemical from reaching the groundwater and eventually the Columbia River.

433

EM Employs Innovative Technology to Remove Radioactive Sludge | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Employs Innovative Technology to Remove Radioactive Sludge Employs Innovative Technology to Remove Radioactive Sludge EM Employs Innovative Technology to Remove Radioactive Sludge September 1, 2012 - 12:00pm Addthis Testing and equipment simulations ensure first-of-a-kind technological processes for sludge removal can be conducted safely and efficiently. Testing and equipment simulations ensure first-of-a-kind technological processes for sludge removal can be conducted safely and efficiently. RICHLAND, Wash. - The Richland Operations Office and contractor CH2M HILL Plateau Remediation Company successfully removed a portion of a highly radioactive sludge from underwater storage in a large basin adjacent to the K West reactor at the Hanford site this month. In that milestone, workers removed sludge originating from knock-out pots,

434

NETL: Gasification Systems - Warm Gas Multi-Contaminant Removal System  

NLE Websites -- All DOE Office Websites (Extended Search)

Warm Gas Multi-Contaminant Removal System Warm Gas Multi-Contaminant Removal System Project Number: DE-SC00008243 TDA Research, Inc. is developing a high-capacity, low-cost sorbent that removes anhydrous ammonia (NH3), mercury (Hg), and trace contaminants from coal- and coal/biomass-derived syngas. The clean-up system will be used after the bulk warm gas sulfur removal step, and remove NH3 and Hg in a regenerable manner while irreversibly capturing all other trace metals (e.g., Arsenic, Selenium) reducing their concentrations to sub parts per million (ppm) levels. Current project plans include identifying optimum chemical composition and structure that provide the best sorbent performance for removing trace contaminants, determining the effect of operating parameters, conducting multiple-cycle experiments to test the life of the sorbent for NH3 and Hg removal, and conducting a preliminary design of the sorbent reactor.

435

Heavy Water Components Test Reactor Decommissioning - Major Component Removal  

SciTech Connect

The Heavy Water Components Test Reactor (HWCTR) facility (Figure 1) was built in 1961, operated from 1962 to 1964, and is located in the northwest quadrant of the Savannah River Site (SRS) approximately three miles from the site boundary. The HWCTR facility is on high, well-drained ground, about 30 meters above the water table. The HWCTR was a pressurized heavy water test reactor used to develop candidate fuel designs for heavy water power reactors. It was not a defense-related facility like the materials production reactors at SRS. The reactor was moderated with heavy water and was rated at 50 megawatts thermal power. In December of 1964, operations were terminated and the facility was placed in a standby condition as a result of the decision by the U.S. Atomic Energy Commission to redirect research and development work on heavy water power reactors to reactors cooled with organic materials. For about one year, site personnel maintained the facility in a standby status, and then retired the reactor in place. In 1965, fuel assemblies were removed, systems that contained heavy water were drained, fluid piping systems were drained, deenergized and disconnected and the spent fuel basin was drained and dried. The doors of the reactor facility were shut and it wasn't until 10 years later that decommissioning plans were considered and ultimately postponed due to budget constraints. In the early 1990s, DOE began planning to decommission HWCTR again. Yet, in the face of new budget constraints, DOE deferred dismantlement and placed HWCTR in an extended surveillance and maintenance mode. The doors of the reactor facility were welded shut to protect workers and discourage intruders. The $1.6 billion allocation from the American Recovery and Reinvestment Act to SRS for site clean up at SRS has opened the doors to the HWCTR again - this time for final decommissioning. During the lifetime of HWCTR, 36 different fuel assemblies were tested in the facility. Ten of these experienced cladding failures as operational capabilities of the different designs were being established. In addition, numerous spills of heavy water occurred within the facility. Currently, radiation and radioactive contamination levels are low within HWCTR with most of the radioactivity contained within the reactor vessel. There are no known insults to the environment, however with the increasing deterioration of the facility, the possibility exists that contamination could spread outside the facility if it is not decommissioned. An interior panoramic view of the ground floor elevation taken in August 2009 is shown in Figure 2. The foreground shows the transfer coffin followed by the reactor vessel and control rod drive platform in the center. Behind the reactor vessel is the fuel pool. Above the ground level are the polar crane and the emergency deluge tank at the top of the dome. Note the considerable rust and degradation of the components and the interior of the containment building. Alternative studies have concluded that the most environmentally safe, cost effective option for final decommissioning is to remove the reactor vessel, steam generators, and all equipment above grade including the dome. Characterization studies along with transport models have concluded that the remaining below grade equipment that is left in place including the transfer coffin will not contribute any significant contamination to the environment in the future. The below grade space will be grouted in place. A concrete cover will be placed over the remaining footprint and the groundwater will be monitored for an indefinite period to ensure compliance with environmental regulations. The schedule for completion of decommissioning is late FY2011. This paper describes the concepts planned in order to remove the major components including the dome, the reactor vessel (RV), the two steam generators (SG), and relocating the transfer coffin (TC).

Austin, W.; Brinkley, D.

2010-05-05T23:59:59.000Z

436

Heavy Water Components Test Reactor Decommissioning - Major Component Removal  

SciTech Connect

The Heavy Water Components Test Reactor (HWCTR) facility (Figure 1) was built in 1961, operated from 1962 to 1964, and is located in the northwest quadrant of the Savannah River Site (SRS) approximately three miles from the site boundary. The HWCTR facility is on high, well-drained ground, about 30 meters above the water table. The HWCTR was a pressurized heavy water test reactor used to develop candidate fuel designs for heavy water power reactors. It was not a defense-related facility like the materials production reactors at SRS. The reactor was moderated with heavy water and was rated at 50 megawatts thermal power. In December of 1964, operations were terminated and the facility was placed in a standby condition as a result of the decision by the U.S. Atomic Energy Commission to redirect research and development work on heavy water power reactors to reactors cooled with organic materials. For about one year, site personnel maintained the facility in a standby status, and then retired the reactor in place. In 1965, fuel assemblies were removed, systems that contained heavy water were drained, fluid piping systems were drained, deenergized and disconnected and the spent fuel basin was drained and dried. The doors of the reactor facility were shut and it wasn't until 10 years later that decommissioning plans were considered and ultimately postponed due to budget constraints. In the early 1990s, DOE began planning to decommission HWCTR again. Yet, in the face of new budget constraints, DOE deferred dismantlement and placed HWCTR in an extended surveillance and maintenance mode. The doors of the reactor facility were welded shut to protect workers and discourage intruders. The $1.6 billion allocation from the American Recovery and Reinvestment Act to SRS for site clean up at SRS has opened the doors to the HWCTR again - this time for final decommissioning. During the lifetime of HWCTR, 36 different fuel assemblies were tested in the facility. Ten of these experienced cladding failures as operational capabilities of the different designs were being established. In addition, numerous spills of heavy water occurred within the facility. Currently, radiation and radioactive contamination levels are low within HWCTR with most of the radioactivity contained within the reactor vessel. There are no known insults to the environment, however with the increasing deterioration of the facility, the possibility exists that contamination could spread outside the facility if it is not decommissioned. An interior panoramic view of the ground floor elevation taken in August 2009 is shown in Figure 2. The foreground shows the transfer coffin followed by the reactor vessel and control rod drive platform in the center. Behind the reactor vessel is the fuel pool. Above the ground level are the polar crane and the emergency deluge tank at the top of the dome. Note the considerable rust and degradation of the components and the interior of the containment building. Alternative studies have concluded that the most environmentally safe, cost effective option for final decommissioning is to remove the reactor vessel, steam generators, and all equipment above grade including the dome. Characterization studies along with transport models have concluded that the remaining below grade equipment that is left in place including the transfer coffin will not contribute any significant contamination to the environment in the future. The below grade space will be grouted in place. A concrete cover will be placed over the remaining footprint and the groundwater will be monitored for an indefinite period to ensure compliance with environmental regulations. The schedule for completion of decommissioning is late FY2011. This paper describes the concepts planned in order to remove the major components including the dome, the reactor vessel (RV), the two steam generators (SG), and relocating the transfer coffin (TC).

Austin, W.; Brinkley, D.

2010-05-05T23:59:59.000Z

437

University of Rochester Office for Graduate Medical Education 2012 / 2013 OFFICE FOR GRADUATE MEDICAL EDUCATION  

E-Print Network (OSTI)

University of Rochester Office for Graduate Medical Education 2012 / 2013 Page 1 OFFICE FOR GRADUATE MEDICAL EDUCATION RESIDENT/FELLOW MANUAL FOR MEDICAL AND DENTAL PROGRAMS 2012-2013 http://www.urmc Office for Graduate Medical Education 2012 / 2013 Page 2 Table of Contents INTRODUCTION

Goldman, Steven A.

438

Legal Medical Record Standards Policy No. 9420 LEGAL MEDICAL RECORD STANDARDS  

E-Print Network (OSTI)

Legal Medical Record Standards Policy No. 9420 LEGAL MEDICAL RECORD STANDARDS PURPOSE To establish guidelines for the contents, maintenance, and confidentiality of patient Medical Records that meet's healthcare information, whether in paper or electronic format, that comprises the medical record. Patient

Abagyan, Ruben

439

Division of Medical Sciences Ph.D. Programs at Harvard Medical School  

E-Print Network (OSTI)

Division of Medical Sciences Ph.D. Programs at Harvard Medical School Quarter Courses Spring Visualization with Maya Catalog Number: 61072 Enrollment: Limited to 18. Gael McGill (Medical School) and David Lopes Cardozo (Medical School) *BCMP 307qc. Approaches to Drug Action, Discovery, and Design Catalog

Mekalanos, John

440

Medical Technology 1 Running Head: USE OF TECHNOLGY IN A MEDICAL SETTING  

E-Print Network (OSTI)

Medical Technology 1 Running Head: USE OF TECHNOLGY IN A MEDICAL SETTING The Use of Different Technologies During a Medical Interview: Effects on Perceived Quality of Care Julia M. DeBlasio, Britt Caldwell of Technology GVU Technical Report # GIT-GVU-07-13 October, 2007 #12;Medical Technology 2 Abstract This two

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

11MEDICAL CHECK UP 11.1 Students' Annual Medical Examination  

E-Print Network (OSTI)

23 11.1 11.2 11MEDICAL CHECK UP 11.1 Students' Annual Medical Examination All students are required to take the annual medical examination which takes place in spring. Please make sure to check the home page or the bulletin board for the exact date and time. Medical examination is also held

442

UC COMPENSATION FOR INJURY 1a. GENERAL PROVISION OF MEDICAL TREATMENT OR REIMBURSEMENT OF MEDICAL COST  

E-Print Network (OSTI)

UC COMPENSATION FOR INJURY GUIDELINES 1a. GENERAL PROVISION OF MEDICAL TREATMENT OR REIMBURSEMENT OF MEDICAL COST The University of California will provide to any injured subject any and all medical or illness is a consequence of a medical research procedure which is designed to benefit the subject directly

El Zarki, Magda

443

MEDICAL INSURANCE The CHEIBA Trust is pleased to continue to offer you three medical insurance plans  

E-Print Network (OSTI)

- 23 - MEDICAL INSURANCE The CHEIBA Trust is pleased to continue to offer you three medical and are included with your medical coverage. MyAnthemTM Tired of paperwork and phone calls? MyAnthemTM takes See if your medication is on the Anthem formulary Visit MyHealth@Anthem® , powered by Web

444

WORLD MEDICAL ASSOCIATION DECLARATION OF HELSINKI Ethical Principles for Medical Research Involving Human Subjects  

E-Print Network (OSTI)

1 WORLD MEDICAL ASSOCIATION DECLARATION OF HELSINKI Ethical Principles for Medical Research, October 2008 A. INTRODUCTION 1. The World Medical Association (WMA) has developed the Declaration of Helsinki as a statement of ethical principles for medical research involving human subjects, including

Pfeifer, Holger

445

Transforming Parks and Protected Areas  

E-Print Network (OSTI)

areas Lisa M. Campbell, Noella J. Gray; and Zoe A. Meletis In many countries, parks and protected areas construction of nature, conservation and development narratives, and alternative consumption - and what World' or 'developing' countries. One feature of political ecology has been an overriding emphasis

Bolch, Tobias

446

Cathodic protection diagnostic expert system  

Science Conference Proceedings (OSTI)

A knowledge-based diagnostic system has been developed for troubleshooting cathodic protection systems. The expert system is designed to work in conjunction with a database that stores inventory and field measurement information and flags problem areas. The system is described, and examples of troubleshooting using the system are presented.

Van Blaricum, V.L.; Kumar, A. (Army Construction Engineering Research Labs., Champaign, IL (United States)); Park, Y.T. (Soong Sil Univ., Seoul (Korea, Republic of). Dept. of Computer Science)

1994-12-01T23:59:59.000Z

447

Protect Your Heart Against Diabetes  

E-Print Network (OSTI)

Protect Your Heart Against Diabetes Healthy Hearts, Healthy Homes #12;Read other booklets in the Healthy Hearts, Healthy Homes series: Are You at Risk for Heart Disease? Do You Need To Lose Weight? Do Free Web site: www.nhlbi.nih.gov/health/public/heart/other/sp_package.htm For More Information

Bandettini, Peter A.

448

Environmental Compliance and Protection Program Description Oak Ridge, Tennessee  

SciTech Connect

The objective of the Environmental Compliance and Protection (EC and P) Program Description (PD) is to establish minimum environmental compliance requirements and natural resources protection goals for the Bechtel Jacobs Company LLC (BJC) Oak Ridge Environmental Management Cleanup Contract (EMCC) Contract Number DE-AC05-98OR22700-M198. This PD establishes the work practices necessary to ensure protection of the environment during the performance of EMCC work activities on the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, by BJC employees and subcontractor personnel. Both BJC and subcontractor personnel are required to implement this PD. A majority of the decontamination and demolition (D and D) activities and media (e.g., soil and groundwater) remediation response actions at DOE sites on the ORR are conducted under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). CERCLA activities are governed by individual CERCLA decision documents (e.g., Record of Decision [ROD] or Action Memorandum) and according to requirements stated in the Federal Facility Agreement for the Oak Ridge Reservation (DOE 1992). Applicable or relevant and appropriate requirements (ARARs) for the selected remedy are the requirements for environmental remediation responses (e.g., removal actions and remedial actions) conducted under CERCLA.

Bechtel Jacobs

2009-02-26T23:59:59.000Z

449

Categorical Exclusion 4566, Ash Removal Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FOrnI FOrnI Project Title: Ash Removal Project (4566) Program or Program Office: Y -12 Site Office Location: Oak Ridge Tennessee Project Description: This work scope is to split, containerize, package, transport and disposition one hundred and two (102) cans of mixed waste. General Administration/Management OA I - Routine business actions OA2 * Administrative contract amendments OA4 - Interpretations/rulings for existing regulations OA5 - Regulatory interpretations without environmental effect OA6 - Procedural rule makings upgrade OA 7 - Transfer of property, use unchanged OA8 . Award of technical supportlM&O/personal service contracts OA9 - Info gathering, analysis, documentation, dissemination, and training OA 10 - Reports on non-DOE legislation OA II -

450

AX Tank Farm tank removal study  

SciTech Connect

This report considers the feasibility of exposing, demolishing, and removing underground storage tanks from the 241-AX Tank Farm at the Hanford Site. For the study, it was assumed that the tanks would each contain 360 ft{sup 3} of residual waste (corresponding to the one percent residual Inventory target cited in the Tri-Party Agreement) at the time of demolition. The 241-AX Tank Farm is being employed as a ''strawman'' in engineering studies evaluating clean and landfill closure options for Hanford single-shell tank farms. The report is one of several reports being prepared for use by the Hanford Tanks Initiative Project to explore potential closure options and to develop retrieval performance evaluation criteria for tank farms.

SKELLY, W.A.

1998-10-14T23:59:59.000Z

451

Electrochemical removal of material from metallic work  

DOE Patents (OSTI)

Deburring, polishing, surface forming and the like are carried out by electrochemical machining with conformable electrode means including an electrically conducting and an insulating web. The surface of the work to be processed is covered by a deformable electrically insulating web or cloth which is perforated and conforms with the work. The web is covered by a deformable perforated electrically conducting screen electrode which also conforms with, and is insulated from, the work by the insulating web. An electrolyte is conducted through the electrode and insulating web and along the work through a perforated elastic member which engages the electrode under pressure pressing the electrode and web against the work. High current under low voltage is conducted betwen the electrode and work through the insulator, removing material from the work. Under the pressure of the elastic member, the electrode and insulator continue to conform with the work and the spacing between the electrode and work is maintained constant.

Csakvary, Tibor (Wilkens Township, Allegheny County, PA); Fromson, Robert E. (Wilkens Township, Allegheny County, PA)

1980-05-13T23:59:59.000Z

452

The HMDS Coating Flaw Removal Tool  

Science Conference Proceedings (OSTI)

In many high energy laser systems, optics with HMDS sol gel antireflective coatings are placed in close proximity to each other making them particularly susceptible to certain types of strong optical interactions. During the coating process, halo shaped coating flaws develop around surface digs and particles. Depending on the shape and size of the flaw, the extent of laser light intensity modulation and consequent probability of damaging downstream optics may increase significantly. To prevent these defects from causing damage, a coating flaw removal tool was developed that deploys a spot of decane with a syringe and dissolves away the coating flaw. The residual liquid is evacuated leaving an uncoated circular spot approximately 1mm in diameter. The resulting uncoated region causes little light intensity modulation and thus has a low probability of causing damage in optics downstream from the mitigated flaw site.

Monticelli, M V; Nostrand, M C; Mehta, N; Kegelmeyer, L; Johnson, M A; Fair, J; Widmayer, C

2008-10-24T23:59:59.000Z

453

IMPROVED PROCESSES TO REMOVE NAPHTHENIC ACIDS  

SciTech Connect

In the first year of this project, we have established our experimental and theoretical methodologies for studies of the catalytic decarboxylation process. We have developed both glass and stainless steel micro batch type reactors for the fast screening of various catalysts with reaction substrates of model carboxylic acid compounds and crude oil samples. We also developed novel product analysis methods such as GC analyses for organic acids and gaseous products; and TAN measurements for crude oil. Our research revealed the effectiveness of several solid catalysts such as NA-Cat-1 and NA-Cat-2 for the catalytic decarboxylation of model compounds; and NA-Cat-5{approx}NA-Cat-9 for the acid removal from crude oil. Our theoretical calculations propose a three-step concerted oxidative decarboxylation mechanism for the NA-Cat-1 catalyst.

Aihua Zhang; Qisheng Ma; William A. Goddard; Yongchun Tang

2004-04-28T23:59:59.000Z

454

AX Tank Farm tank removal study  

Science Conference Proceedings (OSTI)

This report examines the feasibility of remediating ancillary equipment associated with the 241-AX Tank Farm at the Hanford Site. Ancillary equipment includes surface structures and equipment, process waste piping, ventilation components, wells, and pits, boxes, sumps, and tanks used to make waste transfers to/from the AX tanks and adjoining tank farms. Two remedial alternatives are considered: (1) excavation and removal of all ancillary equipment items, and (2) in-situ stabilization by grout filling, the 241-AX Tank Farm is being employed as a strawman in engineering studies evaluating clean and landfill closure options for Hanford single-shell tanks. This is one of several reports being prepared for use by the Hanford Tanks Initiative Project to explore potential closure options and to develop retrieval performance evaluation criteria for tank farms.

SKELLY, W.A.

1999-02-24T23:59:59.000Z

455

A survey of Sub-Saharan African medical schools  

E-Print Network (OSTI)

directory of medical schools. World Health Organization. [directories of medical schools, contact lists of medical education meetings hosted by the World Health Organization

2012-01-01T23:59:59.000Z

456

DOE: Former Worker Medical Screening Program (FWP) | Department...  

NLE Websites -- All DOE Office Websites (Extended Search)

Former Worker Medical Screening Program (FWP) DOE: Former Worker Medical Screening Program (FWP) Addthis Description FWP provides no-cost medical screenings to all former DOE...

457

California Medical Association and Emergency Medicine - A Vital Link  

E-Print Network (OSTI)

July 14, 2009. California Medical Association. About CMA.L egislative California Medical Association and Emergencyand in- hospital emergency medical systems and the skills

Lieser, Alexis

2009-01-01T23:59:59.000Z

458

ORISE: The Medical Basis for Radiation-Accident Preparedness...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Medical Basis for Radiation-Accident Preparedness: Medical Management Proceedings of the Fifth International REACTS Symposium on the Medical Basis for Radiation-Accident...

459

Former Worker Program Medical Protocol | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Medical Protocol Former Worker Program Medical Protocol April 2013 The medical protocol is intended to identify work-related health outcomes of relevance to DOE workers for which...

460

Medical student dermatology research in the United States  

E-Print Network (OSTI)

PC, The value of medical student research: the experience atfor successful medical student research, new mechanisms ofbenchwork. Medical student research activity increased

Wagner, Richard F MD; PharmD, Boris Ioffe

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

AVLIS enrichment of medical isotopes  

SciTech Connect

Under the Sponsorship of the United states Enrichment Corporation (USEC), we are currently investigating the large scale separation of several isotopes of medical interest using atomic vapor isotope separation (AVLIS). This work includes analysis and experiments in the enrichment of thallium 203 as a precursor to the production of thallium 201 used in cardiac imaging following heart attacks, on the stripping of strontium 84 from natural strontium as precursor to the production of strontium 89, and on the stripping of lead 210 from lead used in integrated circuits to reduce the number of alpha particle induced logic errors.

Haynam, C.A.; Scheibner, K.F.; Stern, R.C.; Worden, E.F. [Lawrence Livermore National Laboratory, CA (United States)

1996-12-31T23:59:59.000Z

462

Regenerable Hydrogen Chloride Removal Sorbent and Regenerable Multifunctional Hydrogen Sulfide and Hydrogen Chloride Removal Sorbent for High Temperature Gas Streams  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Chloride and Hydrogen Sulfide Hydrogen Chloride and Hydrogen Sulfide Removal Sorbents for High Temperature Gas Streams Opportunity The Department of Energy's National Energy Technology Laboratory (NETL) is seeking licensing partners interested in implementing United States Patent Number 7,767,000 entitled "Regenerable Hydrogen Chloride Removal Sorbent and Regenerable Multifunctional Hydrogen Sulfide and Hydrogen Chloride Removal Sorbent for High Temperature Gas Streams." Disclosed in this patent is the invention of a unique regenerable sorbent process that can remove contaminants from gas produced by the gasification of fossil fuels. Specifically, the process removes hydrogen chloride by using the regenerable sorbent and simultaneously extracts hydrogen chloride compounds and hydrogen

463

Conventional Medical Screening Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conventional Medical Screening Program Conventional Medical Screening Program Conventional Medical Screening Program Medical screening is a strategy used to identify diseases or conditions in a select population at an early stage, often before signs and symptoms develop, and to refer individuals with suspicious findings to their personal physician or a specialist for further testing, diagnosis, and treatment. The program is not intended to serve as a substitute for routine medical exams through an individual's personal physician. The medical screening exam offered by the FWP evaluates an employee's health as it relates to their potential occupational exposures to hazardous agents. The FWP uses a customized medical screening protocol that was developed by a team of independent physicians specializing in occupational

464

Removal site evaluation report for the Isotope Facilities at Oak Ridge National Laboratory, Oak Ridge, Tennessee  

Science Conference Proceedings (OSTI)

This removal site evaluation (RmSE) report of the Isotope Facilities at Oak Ridge National Laboratory (ORNL) was prepared to provide the Environmental Restoration Program with information necessary to evaluate whether hazardous and/or radiological contaminants in and around the Isotopes Facility pose a substantial risk to human health or the environment and if remedial site evaluations (RSEs) or removal actions are required. The scope of the project included: (1) a review of historical evidence regarding operations and use of the facility; (2) interviews with facility personnel concerning current and past operating practices; (3) a site inspection; and (4) identification of hazard areas requiring maintenance, removal, or remedial actions. The results of RmSE indicate that no substantial risks exist from contaminants present in the Isotope Facilities because adequate controls and practices exist to protect human health and the environment. The recommended correction from the RmSE are being conducted as maintenance actions; accordingly, this RmSE is considered complete and terminated.

NONE

1996-07-01T23:59:59.000Z

465

Agreement of Medical and Undergraduate School Counselors about the Ways an Average Student Can Improve His Application to Medical School  

E-Print Network (OSTI)

service, volunteering in any medical setting, and obtaininggiven student applicants for medical school. Boththat volunteering in a medical/clinical setting is a highly

Shapiro, Sharon; Stanley, Kristi A; Henderson, Sean O; Massopust, Kristy

2008-01-01T23:59:59.000Z

466

Shore Protection Act (Georgia) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Shore Protection Act (Georgia) Shore Protection Act (Georgia) Shore Protection Act (Georgia) < Back Eligibility Commercial Construction Developer Industrial Investor-Owned Utility Transportation Utility Savings Category Water Buying & Making Electricity Program Info State Georgia Program Type Environmental Regulations Siting and Permitting Provider Georgia Department of Natural Resources The Shore Protection Act is the primary legal authority for protection and management of Georgia's shoreline features including sand dunes, beaches, sandbars, and shoals, collectively known as the sand-sharing system. The value of the sand-sharing system is recognized as vitally important in protecting the coastal marshes and uplands from Atlantic storm activity, as well as providing valuable recreational opportunities.

467

Metal Cutting for Large Component Removal  

Science Conference Proceedings (OSTI)

Decommissioning of commercial nuclear power plants presents technological challenges. One major challenge is the removal of large components mainly consisting of the reactor vessel, steam generators and pressurizer. In order to remove and package these large components nozzles must be cut from the reactor vessel to precise tolerances. In some cases steam generators must be segmented for size and weight reduction. One innovative technology that has been used successfully at several commercial nuclear plant decommissioning is diamond wire sawing. Diamond wire sawing is performed by rotating a cable with diamond segments attached using a flywheel approximately 24 inches in diameter driven remotely by a hydraulic pump. Tension is provided using a gear rack drive which also takes up the slack in the wire. The wire is guided through the use of pulleys keeps the wire in a precise location. The diamond wire consists of 1/4 inch aircraft cable with diamond beads strung over the cable separated by springs and brass crimps. Standard wire contains 40 diamond beads per meter and can be made to any length. Cooling the wire and controlling the spread of contamination presents significant challenges. Under normal circumstances the wire is cooled and the cutting kerf cleaned by using water. In some cases of reactor nozzle cuts the use of water is prohibited because it cannot be controlled. This challenge was solved by using liquid Carbon Dioxide as the cooling agent. The liquid CO{sub 2} is passed through a special nozzle which atomizes the liquid into snowflakes which is introduced under pressure to the wire. The snowflakes attach to the wire keeping it cool and to the metal shavings. As the CO{sub 2} and metal shavings are released from the wire due to its fast rotation, the snowflakes evaporate leaving only the fine metal shavings as waste. Secondary waste produced is simply the small volume of fine metal shavings removed from the cut surface. Diamond wire sawing using CO{sub 2} cooling has been employed for cutting the reactor nozzles at San Onofre Unit 1 and at Connecticut Yankee. These carbon steel nozzles ranged up to 54 inch diameter with a 15 inch thick wall and an interior stainless cladding. Diamond wire sawing using traditional water cooling has been used to segment the reactor head at Rancho Seco and for cutting reactor nozzles and control rod drive tubes at Dairyland Power's Lacrosse BWR project. Advantages: - ALARA: All cutting is preformed remotely significantly reducing dose. Stringing of wires is accomplished using long handle tools. - Secondary waste is reduced to just the volume of material cut with the diamond wire. - The potential for airborne contamination is eliminated. Due to the flexibility of the wire, any access restrictions and interferences can be accommodated using pulleys and long handle tools. - The operation is quiet. Disadvantages: - With Liquid Carbon Dioxide cooling and cleaning, delivery of the material must be carefully planned. The longer the distance from the source to the cut area, the greater the chance for pressure drop and subsequent problems with line freezing. - Proper shrouding and ventilation are required for environmental reasons. In each case, the metal structures were cut at a precise location. Radiation dose was reduced significantly by operating the equipment from a remote location. The cuts were very smooth and completed on schedule. Each project must be analyzed individually and take into account many factors including access, radiological conditions, environmental conditions, schedule requirements, packaging requirements and size of cuts.

Hulick, Robert M. [Bluegrass Concrete Cutting Inc., 107 Mildred Street PO Box 427, Greenville, Alabama 36037 (United States)

2008-01-15T23:59:59.000Z

468

ADVANCES IN HEXAVALENT CHROMIUM REMOVAL AT HANFORD  

SciTech Connect

At the Hanford Site, chromium was used as a corrosion inhibitor in the reactor cooling water and was introduced into the groundwater as a result of planned and unplanned discharges from reactors during plutonium production since 1944. Beginning in 1995, groundwater treatment methods were evaluated leading to the use of pump and treat facilities with ion exchange using Dowex 21 K, a regenerable strong base anion exchange resin. This required regeneration of the resin, which is currently performed offsite. Resin was installed in a 4 vessel train, with resin removal required from the lead vessel approximately once a month. In 2007, there were 8 trains (32 vessels) in operation. In 2008, DOE recognized that regulatory agreements would require significant expansion in the groundwater chromium treatment capacity. Previous experience from one of the DOE project managers led to identification of a possible alternative resin, and the contractor was requested to evaluate alternative resins for both cost and programmatic risk reductions. Testing was performed onsite in 2009 and 2010, using a variety of potential resins in two separate facilities with groundwater from specific remediation sites to demonstrate resin performance in the specific groundwater chemistry at each site. The testing demonstrated that a weak base anion single-use resin, ResinTech SIR-700, was effective at removing chromium, had a significantly higher capacity, could be disposed of efficiently on site, and would eliminate the complexities and programmatic risks from sampling, packaging, transportation and return of resin for regeneration. This resin was installed in Hanford's newest groundwater treatment facility, called 100-DX, which began operations in November, 2010, and used in a sister facility, 100-HX, which started up in September of 2011. This increased chromium treatment capacity to 25 trains (100 vessels). The resin is also being tested in existing facilities that utilize Dowex 21 K for conversion to the new resin. This paper will describe the results of the testing, performance in the facilities, continued optimization in the pump and treat facilities, and the estimated savings and non-tangible benefits of the conversion.

NESHEM DO; RIDDELLE J

2012-01-30T23:59:59.000Z

469

Groundwater Protection, Brookhaven National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Groundwater Groundwater placeholder DOE, BNL, elected officials, and community leaders mark the opening of the first off-site groundwater treatment system. From the outset, the Department of Energy (DOE) and the Brookhaven National Laboratory (BNL) considered the protection of human health to be the most important goal of the cleanup program. Because exposure to groundwater contamination had the greatest potential to impact human health, the focus was to ensure that local drinking water supplies were clean and safe. Early efforts concentrated on determining the locations of the contamination, installing treatment systems to clean up the groundwater, and remediating sources of contamination like landfills and underground tanks. DOE and the Lab are committed to protecting Long Island's sole-source aquifer, a vital natural resource.

470

EO 11990: Protection Of Wetlands  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

90-Protection Of Wetlands 90-Protection Of Wetlands SOURCE: The provisions of Executive Order 11990 of May 24, 1977, appear at 42 FR 26961, 3 CFR, 1977 Comp., p. 121, unless otherwise noted. By virtue of the authority vested in me by the Constitution and statutes of the United States of America, and as President of the United States of America, in furtherance of the National Environmental Policy Act of 1969, as amended (42 U.S.C. 4321 et s eq.), in order to avoid to the extent possible the long and short term adverse impacts associated with the destruction or modification of wetlands and to avoid direct or indirect support of new construction in wetlands wherever there is a practicable alternative, it is hereby ordered as follows: SECTION 1. (a) Each agency shall provide leadership and shall take action to minimize the

471

Flash drying protects standby plants  

Science Conference Proceedings (OSTI)

This article describes how special fast-drying technique provides effective corrosion protection for units that will be in standby for a short time. The Jacksonville Electric Authority (JEA) has developed a technique for rapidly drying out its boilers as an effective corrosion prevention measure, even for units which will be out of service for a short time. The JEA has several steam generating units that are not in continual service. These units, whether on standby or in extended cold storage, must be maintained if they are to operate reliably when they are needed. JEA uses dehumidification as the primary method to reduce corrosion in these standby units. Engineers at JEA believe it is better to reduce the amount of water retained in standby boilers than to add inhibiting chemicals to retained water for corrosion protection.

Mallard, R.E.

1996-08-01T23:59:59.000Z

472

Cathodic Protection of Offshore Structures  

Science Conference Proceedings (OSTI)

Table 4   Design criteria for cathodic protection systems...Africa 20??30 5??21 Low Low 130 (12) 90 (8) 90 (8) Indonesia 19 24 Moderate Moderate 110 (10) 75 (7) 75 (7) South China Sea 18 30 Low Low 100 (9) 35 (3) 35 (3) Sea mud 100 Same as water N/A N/A 21.5 (2) 10.8 (1) 10.8 (1) (a) Typical values and ratings

473

Oak Ridge Removes Laboratory's Greatest Source of Groundwater  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oak Ridge Removes Laboratory's Greatest Source of Groundwater Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination May 1, 2012 - 12:00pm Addthis Workers remove the 4,000-gallon Tank W-1A, which was ORNL’s greatest source of groundwater contamination. Workers remove the 4,000-gallon Tank W-1A, which was ORNL's greatest source of groundwater contamination. Workers load boxes containing contaminated soil that surrounded Tank W-1A. Workers load boxes containing contaminated soil that surrounded Tank W-1A. The 6,500-pound Tank W-1A is shipped away from ORNL. The 6,500-pound Tank W-1A is shipped away from ORNL. Workers remove the 4,000-gallon Tank W-1A, which was ORNL's greatest source of groundwater contamination. Workers load boxes containing contaminated soil that surrounded Tank W-1A.

474

Magnetic Process For Removing Heavy Metals From Water Employing Magnetites  

NLE Websites -- All DOE Office Websites (Extended Search)

Magnetic Process For Removing Heavy Metals From Water Employing Magnetic Process For Removing Heavy Metals From Water Employing Magnetites Magnetic Process For Removing Heavy Metals From Water Employing Magnetites A process for removing heavy metals from water is provided. The process includes the steps of introducing magnetite to a quantity of water containing heavy metal. Available for thumbnail of Feynman Center (505) 665-9090 Email Magnetic Process For Removing Heavy Metals From Water Employing Magnetites A process for removing heavy metals from water is provided. The process includes the steps of introducing magnetite to a quantity of water containing heavy metal. The magnetite is mixed with the water such that at least a portion of, and preferably the majority of, the heavy metal in the water is bound to the magnetite. Once this occurs the magnetite and

475

Oak Ridge Removes Laboratory's Greatest Source of Groundwater  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oak Ridge Removes Laboratory's Greatest Source of Groundwater Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination May 1, 2012 - 12:00pm Addthis Workers remove the 4,000-gallon Tank W-1A, which was ORNL’s greatest source of groundwater contamination. Workers remove the 4,000-gallon Tank W-1A, which was ORNL's greatest source of groundwater contamination. Workers load boxes containing contaminated soil that surrounded Tank W-1A. Workers load boxes containing contaminated soil that surrounded Tank W-1A. The 6,500-pound Tank W-1A is shipped away from ORNL. The 6,500-pound Tank W-1A is shipped away from ORNL. Workers remove the 4,000-gallon Tank W-1A, which was ORNL's greatest source of groundwater contamination. Workers load boxes containing contaminated soil that surrounded Tank W-1A.

476

NETL: News Release - Innovative Mercury Removal Technique Shows Early  

NLE Websites -- All DOE Office Websites (Extended Search)

August 5, 2003 August 5, 2003 Innovative Mercury Removal Technique Shows Early Promise Photochemical Process Developed in Federal Lab Removes Mercury from Flue Gas - NETL scientist Evan Granite prepares a lab test of the UV mercury removal process. - NETL scientist Evan Granite prepares for a lab test of the UV mercury removal process. MORGANTOWN, WV - A promising technology to remove mercury from coal-fired power plants -- dubbed the "GP-254 Process" -- has been developed and is currently being tested at the Department of Energy's National Energy Technology Laboratory (NETL). Newly patented, the GP-254 Process enhances mercury removal using ultraviolet light to induce various components of power plant stack gas to react with the mercury, and changes the

477

ORISE: Advanced Radiation Medicine | REAC/TS Continuing Medical...  

NLE Websites -- All DOE Office Websites (Extended Search)

Incident Medical Consultation Cytogenetic Biodosimetry Continuing Medical Education Radiation Emergency Medicine Advanced Radiation Medicine Health Physics in Radiation...

478

Tritium emission reduction at Darlington tritium removal facility using a Bubbler System  

SciTech Connect

Ontario Power Generation Nuclear (OPGN) has a 4 x 880 MWe CANDU nuclear station at its Darlington Nuclear Div. located in Bowmanville. The station operates a Tritium Removal Facility (TRF) to reduce and maintain low tritium levels in the Moderator and Heat Transport heavy water systems of Ontario's CANDU fleet by extracting, concentrating, immobilizing and storing as a metal tritide. Minimizing tritium releases to the environment is of paramount importance to ensure that dose to the public is as low as reasonably achievable (ALARA) and to maintain credibility with the Public. Tritium is removed from the Cryogenic Distillation System to the Tritium Immobilization System (TIS) glove box via a transfer line that is protected by a rupture disc and relief valve. An overpressure event in 2003 had caused the rupture disc to blow, resulting in the release of a significant quantity of elemental tritium into the relief valve discharge line, which ties into the contaminated exhaust system. As a result of a few similar events occurring over a number of years of TRF operation, the released elemental tritium would have been converted to tritium oxide in the presence of a stagnant moist air environment in the stainless steel discharge line. A significant amount of tritium oxide hold-up in the discharge line was anticipated. To minimize any further releases to the environment, a Bubbler System was designed to remove and recover the tritium from the discharge line. This paper summarizes the results of several Bubbler recovery runs that were made over a period of a month. Approximately 3500 Ci of tritium oxide and 230 Ci of elemental tritium were removed and collected. The tritium contained in the water produced from the Bubbler system was later safely recovered in the station's downgraded D{sub 2}O clean-up and recovery system. (authors)

Kalyanam, K.; Leilabadi, A.; El-Behairy, O.; Williams, G. I. D.; Vogt, H. K. [Ontario Power Generation, Darlington Nuclear, PO Box 4000, Bowmanville, ON L1C 3Z8 (Canada)

2008-07-15T23:59:59.000Z

479

Medical Applications of Synchrotron Radiation  

DOE R&D Accomplishments (OSTI)

Ever since the first diagnostic x-ray was done in the United States on February 3, 1896, the application of ionizing radiation to the field of medicine has become increasingly important. Both in clinical medicine and basic research the use of x-rays for diagnostic imaging and radiotherapy is now widespread. Radiography, angiography, CAT and PETT scanning, mammography, and nuclear medicine are all examples of technologies developed to image the human anatomy. In therapeutic applications, both external and internal sources of radiation are applied to the battle against cancer. The development of dedicated synchrotron radiation sources has allowed exciting advances to take place in many of these applications. The new sources provide tunable, high-intensity monochromatic beams over a wide range of energies which can be tailored to specific programmatic needs. This paper surveys those areas of medical research in which synchrotron radiation facilities are actively involved.

Thomlinson, W.

1991-10-00T23:59:59.000Z

480

Medical applications of synchrotron radiation  

SciTech Connect

Ever since the first diagnostic x-ray was done in the United States on February 3, 1896, the application of ionizing radiation to the field of medicine has become increasingly important. Both in clinical medicine and basic research the use of x-rays for diagnostic imaging and radiotherapy is now widespread. Radiography, angiography, CAT and PETT scanning, mammography, and nuclear medicine are all examples of technologies developed to image the human anatomy. In therapeutic applications, both external and internal sources of radiation are applied to the battle against cancer. The development of dedicated synchrotron radiation sources has allowed exciting advances to take place in many of these applications. The new sources provide tunable, high-intensity monochromatic beams over a wide range of energies which can be tailored to specific programmatic needs. This paper surveys those areas of medical research in which synchrotron radiation facilities are actively involved.

Thomlinson, W.

1991-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "medical removal protection" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Insulating shade assembly with removable cover  

SciTech Connect

An insulating window shade assembly is described which consists of: bracket means adapted to be mounted on the frame of a window; a first roller carrying an insulating shade and being disposed within the bracket means on the inside of the window, the shade being adapted to be drawn from the roller to cover the inside of the window and to be wound upon the roller to expose the window, a second roller carrying a removable cover fabric on the inside of the shade and being supported by the bracket means, the second roller being spaced from and disposed independently of the first roller, means disposed adjacent only the bottom edge of the insulating shade for connecting only the bottom edge of the cover fabric to the bottom only of the insulating shade so that the insulating shade and cover fabric may be drawn together over the inside of the window; guide means disposed adjacent the second roller and between the second roller and the insulating shade, the cover fabric passing over the guide means, for causing the cover fabric to hang closely adjacent the front of the insulating shade when the insulating shade is drawn over the window and when the insulating shade and cover fabric are connected together by the connecting means, and means for continually tensioning the cover fabric when the insulating shade is drawn and when the cover fabric is connected thereto so that the cover fabric lies smoothly over the shade.

Hausmann, S.; McLane, A. Jr.

1986-09-09T23:59:59.000Z

482

Metagenomic analysis of phosphorus removing sludgecommunities  

SciTech Connect

Enhanced Biological Phosphorus Removal (EBPR) is not wellunderstood at the metabolic level despite being one of the best-studiedmicrobially-mediated industrial processes due to its ecological andeconomic relevance. Here we present a metagenomic analysis of twolab-scale EBPR sludges dominated by the uncultured bacterium, "CandidatusAccumulibacter phosphatis." This analysis resolves several controversiesin EBPR metabolic models and provides hypotheses explaining the dominanceof A. phosphatis in this habitat, its lifestyle outside EBPR and probablecultivation requirements. Comparison of the same species from differentEBPR sludges highlights recent evolutionary dynamics in the A. phosphatisgenome that could be linked to mechanisms for environmental adaptation.In spite of an apparent lack of phylogenetic overlap in the flankingcommunities of the two sludges studied, common functional themes werefound, at least one of them complementary to the inferred metabolism ofthe dominant organism. The present study provides a much-needed blueprintfor a systems-level understanding of EBPR and illustrates thatmetagenomics enables detailed, often novel, insights into evenwell-studied biological systems.

Garcia Martin, Hector; Ivanova, Natalia; Kunin, Victor; Warnecke,Falk; Barry, Kerrie; McHardy, Alice C.; Yeates, Christine; He, Shaomei; Salamov, Asaf; Szeto, Ernest; Dalin, Eileen; Putnam, Nik; Shapiro, HarrisJ.; Pangilinan, Jasmyn L.; Rigoutsos, Isidore; Kyrpides, Nikos C.; Blackall, Linda Louise; McMahon, Katherine D.; Hugenholtz, Philip

2006-02-01T23:59:59.000Z

483

Method of removing oxidized contaminants from water  

DOE Patents (OSTI)

The present invention is a method for removing oxidized contaminant(s) from water. More specifically, the invention has the steps of contacting water containing the oxidized contaminant(s) with a layered aluminosilicate having Fe(II). The aluminosilicate may contain naturally occurring Fe(II), or the Fe(II) may be produced by reducing Fe(III) that is initially present. Reduction may be either by exposure to a chemical or biological reductant. Contacting the water containing oxidized contaminant(s) may be by (1) injection of Fe(II)-containing layered aluminosilicate, via a well, into a saturated zone where it is likely to intercept the contaminated water; (2) injection of contaminated water into a vessel containing the Fe(II)-bearing layered aluminosilicate; and (3) first reducing Fe(III) in the layered aluminosilicate to Fe(II) by injection of a biological or chemical reductant, into an aquifer or vessel having sufficient Fe(III)-bearing aluminosilicate to produce the necessary Fe(II). 8 figs.

Amonette, J.E.; Fruchter, J.S.; Gorby, Y.A.; Cole, C.R.; Cantrell, K.J.; Kaplan, D.I.

1998-07-21T23:59:59.000Z

484

Method of removing oxidized contaminants from water  

DOE Patents (OSTI)

The present invention is a method for removing oxidized contaminant(s) from water. More specifically, the invention has the steps of contacting water containing the oxidized contaminant(s) with a layered aluminosilicate having Fe(II). The aluminosilicate may contain naturally occurring Fe(II), or the Fe(II) may be produced by reducing Fe(III) that is initially present. Reduction may be either by exposure to a chemical or biological reductant. Contacting the water containing oxidized contaminant(s) may be by (1) injection of Fe(II)-containing layered aluminosilicate, via a well, into a saturated zone where it is likely to intercept the contaminated water; (2) injection of contaminated water into a vessel containing the Fe(II)-bearing layered aluminosilicate; and (3) first reducing Fe(III) in the layered aluminosilicate to Fe(II) by injection of a biological or chemical reductant, into an aquifer or vessel having sufficient Fe(III)-bearing aluminosilicate to produce the necessary Fe(II).

Amonette, James E. (Richland, WA); Fruchter, Jonathan S. (Richland, WA); Gorby, Yuri A. (Richland, WA); Cole, Charles R. (West Richmond, WA); Cantrell, Kirk J. (West Richmond, WA); Kaplan, Daniel I. (Richland, WA)

1998-01-01T23:59:59.000Z

485

HIGH SO2 REMOVAL EFFICIENCY TESTING  

Science Conference Proceedings (OSTI)

This final report describes the results of performance tests at six full-scale wet lime- and limestone-reagent flue gas desulfurization (FGD) systems. The objective of these tests was to evaluate the effectiveness of low capital cost sulfur dioxide (SO{sub 2}) removal upgrades for existing FGD systems as an option for complying with the provisions of the Clean Air Act Amendments of 1990. The upgrade options tested at the limestone-reagent systems included the use of organic acid additives (dibasic acid (DBA) and/or sodium formate) as well as increased reagent ratio (higher excess limestone levels in the recirculating slurry solids) and absorber liquid-to-gas ratio. One system also tested operating at higher flue gas velocities to allow the existing FGD system to treat flue gas from an adjacent, unscrubbed unit. Upgrade options for the one lime-based system tested included increased absorber venturi pressure drop and increased sulfite concentration in the recirculating slurry liquor.

Gary M. Blythe; James L. Phillips

1997-10-15T23:59:59.000Z

486

Improved Processes to Remove Naphthenic Acids  

Science Conference Proceedings (OSTI)

In the past three years, we followed the work plan as we suggested in the proposal and made every efforts to fulfill the project objectives. Based on our large amount of creative and productive work, including both of experimental and theoretic aspects, we received important technical breakthrough on naphthenic acid removal process and obtained deep insight on catalytic decarboxylation chemistry. In detail, we established an integrated methodology to serve for all of the experimental and theoretical work. Our experimental investigation results in discovery of four type effective catalysts to the reaction of decarboxylation of model carboxylic acid compounds. The adsorption experiment revealed the effectiveness of several solid materials to naphthenic acid adsorption and acidity reduction of crude oil, which can be either natural minerals or synthesized materials. The test with crude oil also received promising results, which can be potentially developed into a practical process for oil industry. The theoretical work predicted several possible catalytic decarboxylation mechanisms that would govern the decarboxylation pathways depending on the type of catalysts being used. The calculation for reaction activation energy was in good agreement with our experimental measurements.

Aihua Zhang; Qisheng Ma; Kangshi Wang; Yongchun Tang; William A. Goddard

2005-12-09T23:59:59.000Z

487

Bioassay Phantoms Using Medical Images and Computer Aided Manufacturing  

SciTech Connect

A radiation bioassay program relies on a set of standard human phantoms to calibrate and assess radioactivity levels inside a human body for radiation protection and nuclear medicine imaging purposes. However, the methodologies in the development and application of anthropomorphic phantoms, both physical and computational, had mostly remained the same for the past 40 years. We herein propose a 3-year research project to develop medical image-based physical and computational phantoms specifically for radiation bioassay applications involving internally deposited radionuclides. The broad, long-term objective of this research was to set the foundation for a systematic paradigm shift away from the anatomically crude phantoms in existence today to realistic and ultimately individual-specific bioassay methodologies. This long-term objective is expected to impact all areas of radiation bioassay involving nuclear power plants, U.S. DOE laboratories, and nuclear medicine clinics.

Dr. X. Geroge Xu

2011-01-28T23:59:59.000Z

488

Removal of radioactive and other hazardous material from fluid waste  

DOE Patents (OSTI)

Hollow glass microspheres obtained from fly ash (cenospheres) are impregnated with extractants/ion-exchangers and used to remove hazardous material from fluid waste. In a preferred embodiment the microsphere material is loaded with ammonium molybdophosphonate (AMP) and used to remove radioactive ions, such as cesium-137, from acidic liquid wastes. In another preferred embodiment, the microsphere material is loaded with octyl(phenyl)-N-N-diisobutyl-carbamoylmethylphosphine oxide (CMPO) and used to remove americium and plutonium from acidic liquid wastes.

Tranter, Troy J. (Idaho Falls, ID); Knecht, Dieter A. (Idaho Falls, ID); Todd, Terry A. (Aberdeen, ID); Burchfield, Larry A. (W. Richland, WA); Anshits, Alexander G. (Krasnoyarsk, RU); Vereshchagina, Tatiana (Krasnoyarsk, RU); Tretyakov, Alexander A. (Zheleznogorsk, RU); Aloy, Albert S. (St. Petersburg, RU); Sapozhnikova, Natalia V. (St. Petersburg, RU)

2006-10-03T23:59:59.000Z

489

Thiacrown polymers for removal of mercury from waste streams  

DOE Patents (OSTI)

Thiacrown polymers immobilized to a polystyrene-divinylbenzene matrix react with Hg.sup.2+ under a variety of conditions to efficiently and selectively remove Hg.sup.2+ ions from acidic aqueous solutions, even in the presence of a variety of other metal ions. The mercury can be recovered and the polymer regenerated. This mercury removal method has utility in the treatment of industrial wastewater, where a selective and cost-effective removal process is required.

Baumann, Theodore F. (Tracy, CA); Reynolds, John G. (San Ramon, CA); Fox, Glenn A. (Livermore, CA)

2002-01-01T23:59:59.000Z

490

Heat recirculating cooler for fluid stream pollutant removal  

DOE Patents (OSTI)

A process by which heat is removed from a reactant fluid to reach the operating temperature of a known pollutant removal method and said heat is recirculated to raise the temperature of the product fluid. The process can be utilized whenever an intermediate step reaction requires a lower reaction temperature than the prior and next steps. The benefits of a heat-recirculating cooler include the ability to use known pollutant removal methods and increased thermal efficiency of the system.

Richards, George A. (Morgantown, WV); Berry, David A. (Morgantown, WV)

2008-10-28T23:59:59.000Z

491

Help:Protected pages | Open Energy Information  

Open Energy Info (EERE)

Protected pages Protected pages Jump to: navigation, search A protected page is a page where normal users are prevented from editing and/or moving at all. Only a user with sysop permissions can edit or move a protected page. Likewise only sysop users can protect a page in the first place, or unprotect the page to lift the restriction. There are several reasons why a particular page might be protected: On public wikis, pages may be protected because they have been repeatedly targeted with vandalism or moved to bad titles, or where it is believed that vandalism or page moves would have a unusually severe impact. On corporate wikis, pages may be protected when they contain statements which have been approved by management, and policy dictates that those statements can't be changed without following a certain approval

492

Fire Protection Engineering Qualification Standard Reference Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fire Protection Fire Protection Engineering Qualification Standard Reference Guide SEPTEMBER 2009 This page is intentionally blank. Table of Contents i ACRONYMS ................................................................................................................................. ii PURPOSE.......................................................................................................................................1 SCOPE ............................................................................................................................................1 PREFACE.......................................................................................................................................1 TECHNICAL COMPETENCIES................................................................................................3

493

Registration, Force Protection Equipment Demonstration - May 2009 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Registration, Force Protection Equipment Demonstration - May 2009 Registration, Force Protection Equipment Demonstration - May 2009 Registration, Force Protection Equipment Demonstration - May 2009 May 2009 Demonstrating commercially availale physical security/force protection soultions around the world The bombing of Khobar Towers in Saudi Arabia on 25 June 1996 revealed the need for continal vigilance and protection againist terrorist forces intent on harming US personnel and interests. The Chairman if the Joint Chiefs of Staff directed the Services to investigate COTS equipments solutions for physical security/force protection needs. The Office of the Under Secretary of Defense for Acquistion, Technology, and Logistics (OUSD {at&l}) tasked the Office of the US Army Product Manager, force Protection Systems (PM-FPS), to coordiante and facilitate a Force Protection Equipment

494

IEDWorking Paper 1 Environmental Protection, Energy Policy  

E-Print Network (OSTI)

IEDWorking Paper 1 April 2007 Environmental Protection, Energy Policy and Poverty Reduction Protection, Energy Policy and Poverty Reduction ­ Synergies of an Integrated Approach Renate Schubert, Julia.................................................................................................................4 3 Reducing poverty through climate and energy policy

Fischlin, Andreas

495

Secure application partitioning for intellectual property protection  

E-Print Network (OSTI)

Intellectual property protection is a major concern for both hardware and software architects today. Recently secure platforms have been proposed to protect the privacy of application code and enforce that an application ...

O'Donnell, Charles W., S.M. Massachusetts Institute of Technology

2005-01-01T23:59:59.000Z

496

Medical Plans for Non-Medicare Retirees  

NLE Websites -- All DOE Office Websites (Extended Search)

Non-Medicare Retirees Non-Medicare Retirees Medical Plans for Non-Medicare Retirees Blue Cross Blue Shield of New Mexico (BCBSNM) is the provider of medical benefits. Contact Retiree Insurance Providers The Laboratory offers the following two medical plans to non-Medicare retirees for the 2014 calendar year: High-Deductible Health Plan (HDHP) Preferred Provider Option (PPO) Plan Blue Cross Blue Shield of New Mexico (BCBSNM) is the provider of the Laboratory's medical benefits. Retiree medical plan premiums are subject to graduated eligibility. Eligibility LANS Health & Welfare Benefit Plan for Retirees (pdf) - see Eligibility Requirements Comparison and Rates 2014 Medical Plan Comparison (pdf) 2014 Non-Medicare Retiree Premium Rates (pdf) If you would like to receive the Laboratory's free electronic newsletter

497

GTRI: Removing Vulnerable Civilian Nuclear and Radiological Material |  

NLE Websites -- All DOE Office Websites (Extended Search)

Removing Vulnerable Civilian Nuclear and Radiological Material | Removing Vulnerable Civilian Nuclear and Radiological Material | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Fact Sheets > GTRI: Removing Vulnerable Civilian Nuclear and Radiological Material Fact Sheet GTRI: Removing Vulnerable Civilian Nuclear and Radiological Material

498

Application of Feed and Bleed Operations to Remove High Level ...  

Cleaning Method Phase Date. 5 Process Identification After Mechanical Sludge Removal and Chemical Cleaning: ... Block Diagram Filtrate Solids Separation Solids Slurry

499

Organoclay Sorbent for Removal of Carbon Dioxide from Gas ...  

Organoclay Sorbent for Removal of Carbon Dioxide from Gas ... required for sequestration, an area of research identified as a high priority

500

Removal of Last Remaining HEU from Vietnam - Time Lapse Video...  

NLE Websites -- All DOE Office Websites (Extended Search)

(MOST) and the Russian Federation successfully removed 11 kilograms of highly enriched uranium (HEU) from the Dalat Nuclear Research Institute. This is the eleventh country...