National Library of Energy BETA

Sample records for media luna argentina

  1. LUNA: Nuclear astrophysics underground

    SciTech Connect (OSTI)

    Best, A.

    2015-02-24

    Underground nuclear astrophysics with LUNA at the Laboratori Nazionali del Gran Sasso spans a history of 20 years. By using the rock overburden of the Gran Sasso mountain chain as a natural cosmic-ray shield very low signal rates compared to an experiment on the surface can be tolerated. The cross sectons of important astrophysical reactions directly in the stellar energy range have been successfully measured. In this proceeding we give an overview over the key accomplishments of the experiment and an outlook on its future with the expected addition of an additional accelerator to the underground facilities, enabling the coverage of a wider energy range and the measurement of previously inaccessible reactions.

  2. Luna County, New Mexico: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    3 Climate Zone Subtype B. Places in Luna County, New Mexico Columbus, New Mexico Deming, New Mexico Retrieved from "http:en.openei.orgwindex.php?titleLunaCounty,NewMe...

  3. Luna Pier, Michigan: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Luna Pier is a city in Monroe County, Michigan. It falls under Michigan's 15th congressional...

  4. Dalkia Argentina | Open Energy Information

    Open Energy Info (EERE)

    Argentina Jump to: navigation, search Name: Dalkia Argentina Place: Buenos Aires, Argentina Product: Argentina-based subsidiary of Dalkia. References: Dalkia Argentina1 This...

  5. Tectonic and sedimentary evolution of the Luna field area, Italy

    SciTech Connect (OSTI)

    Roveri, M. )

    1990-05-01

    The Luna gas field is located near Crotone (Calabria region, southern Italy) in a shallow-water/onshore area. It was discovered and put into production during the early 1970s. Up to now it has produced 19 {times} 10{sup 9} sm{sup 3} of gas; its productivity (50 {times} 10{sup 6} sm{sup 3}/y) has remained virtually unaltered since the beginning. The field is located on the axial culmination of a thrust-related anticline of the Apennine postcollisional thrust belt; it can be roughly subdivided into two areas characterized by different stratigraphic contexts. In the northern and central parts of the field is a structural trap. Reservoir rocks are Serravallian to Tortonian deep marine resedimented conglomerates and sandstones. These deposits represent part of the infill of a middle-upper Miocene foredeep. Reservoir rocks are now thrusted, eroded, and unconformably overlain by lower Pliocene shales, which are the most important seal in this part of the field. In the southern part of the field is a combination trap. Reservoir rocks are upper Tortonian shallow-water sandstones. They lap onto a Tortonian unconformity related to a tectonic phase which split the previous foredeep into minor piggyback basins. The upper Tortonian sandstones are overlain and sealed by Messinian shales and evaporites. Tectonosedimentary evolution of the area and, consequently, areal distribution and geometry of sedimentary bodies - both potential reservoirs and seals - have been reconstructed using a sequence stratigraphy approach. The sedimentary record has been informally subdivided into five main depositional sequences bounded by unconformities or their correlative conformities; classic facies analysis and petrophysical, seismic, and biostratigraphic data have been utilized to define the internal characteristics of each sequence.

  6. Asociacion Argentina de Energia Eolica | Open Energy Information

    Open Energy Info (EERE)

    Argentina de Energia Eolica Jump to: navigation, search Logo: Asociacion Argentina de Energia Eolica Name: Asociacion Argentina de Energia Eolica Place: Buenos Aires, Argentina...

  7. Argentina set for privatization

    SciTech Connect (OSTI)

    Chynoweth, E.

    1992-12-09

    Buyers are lining up for Argentina's two big state-controlled petrochemical groups, Buenos Aires-based Petroquimica General Mosconi (PGM) and Petroquimica Bahia Blance (PBB). However, feedstock supply contracts with government-owned oil group Yacientos Petroliferos Fiscales (YPG) and gas group Gas del Estado hold the key to both sales. Shell Compania Argentina Petroleo SA (CAPSA), Perez Companc, and Global Petroleum have already bought PGM tender documentation. Shell says it will bid for PGM if the feedstock contract with YPF is acceptable. In addition to price and volume, Shell says the length is critical; it wants a 15-year deal, but would settle for 11. YPF initially sought a five-year contract. PGM, which produces 300,000 m.t./year of aromatics, plus oxo alcohols, methanol, and methyl tert-butyl ether, has sales of $150 million/year.

  8. Buenos Aires, Argentina: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Networking Organizations in Buenos Aires, Argentina Asociacion Argentina de Energia Eolica Registered Policy Organizations in Buenos Aires, Argentina Proyecto de Energias...

  9. LPG in Argentina

    SciTech Connect (OSTI)

    Calcagno, O.

    1986-01-01

    The GNP for Argentina in 1985 was of about 70 billion dollars ( a little over 2200 dollars/capita), the same as 1970 in real terms; foreign debt being over 40 billion. After several years of negative GNP growth, it will probably show a moderate increase in 1986. Industry represents 21 percent of the GNP, agriculture 16 percent. Total exports 12-14 percent. Imports are 8-9 percent. Historical investment of the energy sector was about 3.4 percent. The State, the Public Sector, plays an important role in every aspect, concentrating about 50 percent of the economy. For example, the Central Government sets official prices for most of the forms of energy. Normally, these prices do not relate to international price levels. The country has to catch up with the developed world and it is striving to increase productivity. There is a need to get its products to the external market as well as to attract foreign investment. The government has apparently become fully aware of that, being now a matter of how those goals are accomplished. It may take some time and reeducation of people at all levels to do so.

  10. Argentina-Support for the Preparation of National Climate Change...

    Open Energy Info (EERE)

    Argentina-Support for the Preparation of National Climate Change Strategy Jump to: navigation, search Name UNDP-Argentina Regional Programme for LAC - Support for the preparation...

  11. Media Contacts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Contacts /newsroom/_assets/images/legacy-icon-short.jpg Media Contacts x General News Media Questions Kevin Roark, (505) 665-9202 Science, Technology, Engineering Nancy Ambrosiano, (505) 667-0471 Accelerators, electrodynamics Bioscience, biosecurity, health Chemical science Earth, space sciences Energy, energy security Engineering High energy density plasmas, fluids Information science, supercomputing New materials Nuclear physics, astrophysics Sensors, instrumentation systems Global

  12. Argentina: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Low Emission Capacity Building Programme (LECBP) Argentina-UNEP Risoe Technology Needs Assessment Program view all Add a Program 9 Tools Climate-Smart Agriculture...

  13. Media contact:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Release date: Todd A. Nelson September 23, 2009 (509) 372-9097 media@wch-rcc.com Hanford's cleanup landfill to be expanded RICHLAND, Wash.- Expansion and upgrades are underway at...

  14. Media contact:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Releases Media Releases March 1, 2016 Lockheed Martin Agrees to Pay $5 Million to Settle False Claims Act Allegations February 26, 2016 Three Arrested and Charged in a Scheme to Defraud Federal Research Funding December 16, 2015 Two Men Charged With Wire Fraud December 15, 2015 Former Russian Nuclear Energy Official Sentenced to Four Years in Prison for Money Laundering Conspiracy October 21, 2015 OIG Receives Prestigious CIGIE Award September 24, 2015 Argonne National Laboratory Employee

  15. Media Training

    ScienceCinema (OSTI)

    None

    2011-10-06

    With the LHC starting up soon, the world's media are again turning their attention to CERN. We're all likely to be called upon to explain what is happening at CERN to media, friends and neighbours. The seminar will be given by BBC television news journalists Liz Pike and Nadia Marchant, and will deal with the kind of questions we're likely to be confronted with through the restart period. The training is open for everybody. Make sure you arrive early enough to get a seat - there are only 200 seats in the Globe. The session will also be webcast: http://webcast.cern.ch/

  16. NNSA, Argentina Transition Radiation Detection System | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration Argentina Transition Radiation Detection System May 19, 2014 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) and the Government of Argentina recently completed the transition of full responsibility for the radiation detection systems located at the Port of Buenos Aires and Port of Dock Sud at an official signing in Argentina's capital of Buenos Aires. This transition reflects the strong commitment of Argentina's government to deter, detect and

  17. Electric energy sector in Argentina

    SciTech Connect (OSTI)

    Bastos, C.M.

    1994-06-01

    This article describes how the organization of the electric energy sector in Argentina has changed dramatically from a sector in which state-owned companies worked under a central planning to one in which private companies make their own decisions. The way that the electrical system used to work can be shown by these statements: demand growth estimated by central planning team; projects to be developed and the timetable determined by the same team; unit operations ruled by central dispatch, and under state-owned companies responsibility; integration with neighbor countries focused on physical projects, such as Salto Grande with Uruguay and Yacyreta with Paraguay. Today the electrical system works under these rules: the system has been vertically separated and the companies cannot be integrated; electric energy is considered as an ordinary wealth and the value that consumers give it is taken into account, (the distribution companies pay consumers a penalty for the energy that they cannot supply, the penalty is worth the economic damage consumers suffer due to its lack); producers have to compete for demand. They can sell in two ways: sell under private agreements or sell to the system. Both ways of selling compete with each other because the system buys giving priority to lower costs and, as a consequence, some of the producers do not sell at all.

  18. Media Release Media Contact FOR IMMEDIATE RELEASE...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Media Release Media Contact FOR IMMEDIATE RELEASE Heather Rasmussen September 22, 2011 Communication Specialist (801) 819-7623 hrasmussen@wecc.biz WECC releases its first-ever ...

  19. Media contact:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Release date: Todd A. Nelson September 23, 2009 (509) 372-9097 media@wch-rcc.com Hanford's cleanup landfill to be expanded RICHLAND, Wash.- Expansion and upgrades are underway at the Environmental Restoration Disposal Facility at the Department of Energy's Hanford Site in south-central Washington state, using funds from the American Recovery and Reinvestment Act. The improvements are necessary to accommodate the increasing amounts of cleanup waste disposed by Washington Closure Hanford and

  20. Media contact:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 3, 2009 media@wch-rcc.com Characterization subcontract awarded to North Wind RICHLAND, Wash.-Washington Closure Hanford has awarded a subcontract worth up to $4.4 million to North Wind Inc., a woman-owned small business based in Idaho Falls, Idaho. North Wind will perform nonintrusive characterization at Hanford's 618-10 Burial Ground. Funds for the work come from the American Recovery and Reinvestment Act to create jobs and accelerate environmental cleanup at the U.S. Department of

  1. MEDIA ADVISORY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    invited to join students in crystallography experiment May 16, 2014 MEDIA ADVISORY Los Alamos High School chemistry students to get hands-on x-ray experience LOS ALAMOS, N.M., May 16, 2014-Some 20 students from Los Alamos High School's advanced-placement chemistry class will get to put their wits and crystal-growing skills to the test Monday in the Protein Crystallography Station at the Los Alamos Research Park. The students will learn about the history and theory of X-ray crystallography in the

  2. Argentina-The Mitigation Action Implementation Network (MAIN...

    Open Energy Info (EERE)

    Ministry of Energy Argentina Sector Climate, Energy, Land Focus Area Renewable Energy, Non-renewable Energy, Agriculture, Biomass, - Waste to Energy, Economic Development,...

  3. Argentina-UNEP Risoe Technology Needs Assessment Program | Open...

    Open Energy Info (EERE)

    UNEP Risoe Technology Needs Assessment Program Jump to: navigation, search Name Argentina-UNEP Risoe-Technology Needs Assessment Program AgencyCompany Organization UNEP-Risoe...

  4. LUNA and the Sun

    SciTech Connect (OSTI)

    Broggini, Carlo; Collaboration: LUNA Collaboration

    2014-05-09

    One of the main ingredients of nuclear astrophysics is the knowledge of the thermonu-clear reactions responsible for the stellar luminosity and for the synthesis of the chemical elements. Deep underground in the Gran Sasso Laboratory the cross section of the key reactions of the proton-proton chain and of the Carbon-Nitrogen-Oxygen (CNO) cycle have been measured right down to the energies of astrophysical interest. The main results obtained in the past 20 years are reviewed and their influence on our understanding of the properties of the neutrino and the Sun is discussed.

  5. Luna Hostlist Library

    Energy Science and Technology Software Center (OSTI)

    2013-10-03

    This package implements a Lua interface to the LLNL hostlist routines, and includes a hostlist command oine utility based on the lua hostlist library.

  6. Media & Press

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media & Press News & Publications ESnet News Media & Press Publications and Presentations Galleries ESnet Awards and Honors Contact Us Media Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 or Media@es.net Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Media & Press Media inquiries Contact Media@es.net or

  7. Sandia National Laboratories: News: Media Resources: Media Contacts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Contacts & Resources General Inquiries Members of the News Media: (505) 844-4902 Members of the Public: (505) 844-8066 Other Contacts for the News Media Media Relations team Media Relations assists print, broadcast and online news media to obtain the latest information about Sandia. The team regularly issues news releases, many of which include high-resolution images and video clips, and interactive social media applications when possible that media may download and publish, with

  8. End to deficit of LPG. [Argentina

    SciTech Connect (OSTI)

    Andrich, V.

    1980-03-01

    In the Buenos Aires province of Argentina, Gas de Estado is constructing the future heart of the petrochemical complex, Bahia Blanca. The complex contains 2 absorption-refrigeration plants, a gas compressing plant, equipment maintenance shops and an important operations base for the Argentine truck gas pipelines. This will be the largest LPG plant in Latin America. The General Cerri plant, under construction, is located in an area of 40,000 sq m with new installations to extract ethane and higher hydrocarbons. The design optimizes the extraction of hydrocarbons from the natural gas and recovers 76% of the ethane. Selection of the process resulted from an investigation that compared the system with processes that use water cooling and absorption with refrigerated oil.

  9. Fermilab | Tevatron | Media

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Media Contacts Fermilab Office of Communication +1 630 840 3351, media@fnal.gov Fact Sheets Tevatron scientific highlights Tevatron engineering achievements Fermilab overview Images Tevatron CDF DZero Main Control Room The 4-mile in circumference Tevatron accelerator uses superconducting magnets chilled to minus 450 degrees Fahrenheit, as cold as outer space, to move particles at nearly the speed of light. The Tevatron typically produces about 10 million proton-antiproton collisions per

  10. Media Kit | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Kit The Public Affairs Office is prepared to aid media representatives in preparing for Jefferson Lab stories and photo sessions. We can also help reporters find expert sources for science and technology-based stories. Media kits, provided upon request, offer a wealth of Jefferson Lab information including, photos, informational video, a virtual tour video, news clippings, maps and publications. This information also is available online. The Public Affairs Office makes every effort to work

  11. Media Contacts - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Contacts Newsroom Press Releases Media Contacts Photo Gallery The Hanford Story Hanford Blog Hanford YouTube Channel Media Contacts Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size Richland Operations Office Office of River Protection River Corridor cleanup Reactor/facility cleanout and demolition Solid waste burial ground cleanup Groundwater remediation Central Plateau cleanup Waste Treatment (Vitrification) Plant construction Underground tank waste storage

  12. LANSCE | News & Media | Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    header News Multimedia Events Profiles Highlights Activity Reports The Pulse User Program Headlines News & Media dotline Highlights Measuring the total kinetic energy release in ...

  13. LANSCE | News & Media | Profiles

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    background News Multimedia Events Profiles Highlights Activity Reports The Pulse User Program Headlines News & Media dotline LANSCE Profiles Kurt Schoenberg: Steering LANSCE for ...

  14. Media Coverage - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    v2.jpg Media Coverage News & Events JCAP News JCAP Events Media Coverage News & Events JCAP News JCAP Events Talks Meetings & Workshops Media Coverage Media Coverage + 2016 February 28, 2016 CNN, Fareed Zakarea GPS, JCAP is featured in Episode 207. February 17, 2016 SIERRA MAGAZINE, vol. 101., No.2, p. 31: "A New Leaf, Photosynthesis in the Factory." January 8, 2016 USA TODAY: " 'Flying wind mills' and nuclear waste: The future of energy?" USA TODAY: "Meet 3

  15. Rotary Microfilter Media Evaluation

    SciTech Connect (OSTI)

    Poirier, M

    2005-04-20

    Savannah River National Laboratory (SRNL) received funding from DOE EM-21, Office of Cleanup Technologies, to develop the rotary microfilter for high level radioactive service. One aspect of this project evaluated alternative filter media to select one for the 2nd generation rotary microfilter being procured as a prefilter to a small column ion exchange process. The authors conducted screening tests on a variety of filter media and pore sizes using a stirred cell followed by pilot-scale testing on a more limited number of filter media and pore sizes with a three disk rotary microfilter. These tests used 5.6 molar sodium supernate, and sludge plus monosodium titanate (MST) solids. The conclusions from this work are: (1) The 0.1 {micro} nominal TruMem{reg_sign} ceramic and the Pall PMM M050 (0.5 {micro} nominal) stainless steel filter media produced the highest flux in rotary filter testing. (2) The Pall PMM M050 media produced the highest flux of the stainless steel media tested in rotary filter testing. (3) The Pall PMM M050 media met filtrate quality requirements for the rotary filter. (4) The 0.1 {micro} TruMem{reg_sign} and 0.1 {micro} Pall PMM media met filtrate quality requirements as well. (5) The Pall PMM M050 media produced comparable flux to the 0.1 {micro} TruMem{reg_sign} media, and proved more durable and easier to weld. Based on these test results, the authors recommend Pall PMM M050 filter media for the 2nd generation rotary microfilter.

  16. Photonic layered media

    DOE Patents [OSTI]

    Fleming, James G.; Lin, Shawn-Yu

    2002-01-01

    A new class of structured dielectric media which exhibit significant photonic bandstructure has been invented. The new structures, called photonic layered media, are easy to fabricate using existing layer-by-layer growth techniques, and offer the ability to significantly extend our practical ability to tailor the properties of such optical materials.

  17. Social Media Toolkit

    Broader source: Energy.gov [DOE]

    This Better Buildings Residential Network toolkit can be used to help residential energy efficiency programs learn to engage potential customers through social media. Social media can build brand awareness concerning home energy upgrades and the entities working on them, which can lead to more energy upgrade projects taking place in the long run.

  18. Social Media | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Home About Us News & Blog Social Media Social Media Share your opinions and connect with the Office of Energy Efficiency and Renewable Energy on one of our social media ...

  19. ARM - Social Media Guidance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CenterSocial Media Guidance Media Contact Hanna Goss hanna-dot-goss-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes110 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 6 ARM Mobile Facility 2 47 ARM Mobile Facility 3 1 BAECC 1 BBOP 4 ENA 1 GOAMAZON 7 HI-SCALE 3 MAGIC 15 MC3E 17 PECAN 3 SGP 7 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility News Field Notes

  20. News Media | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media Jefferson Lab's policy is to be open and forthright with the news media and all members of the general public. To assist in the dissemination of news information, the lab provides a variety of resources, which are listed below. If you seek additional information or can't find the information you are seeking, the members of the lab's Public Affairs staff are available to assist. Public Affairs also can help reporters find expert sources for science and technology-based stories. Media

  1. Social media request

    Broader source: Energy.gov [DOE]

    Please fill out the information below in order to request access to a social media application or to have an existing account verified as an official Department of Energy presence. Please wait for...

  2. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Does not cancel other directives.

  3. Jefferson Lab - News Media

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    790 en Media Kit https:www.jlab.orgmedia-kit

  4. TECHNETIUM SORPTION MEDIA REVIEW

    SciTech Connect (OSTI)

    DUNCAN JB; KELLY SE; ROBBINS RA; ADAMS RD; THORSON MA; HAASS CC

    2011-08-25

    This report presents information and references to aid in the selection of 99Tc sorption media for feasibility studies regarding the removal of 99Tc from Hanford's low activity waste. The report contains literature search material for sorption media (including ion exchange media) for the most tested media to date, including SuperLig 639, Reillex HPQ, TAM (Kruion), Purolite A520E and A530E, and Dowex 1X8. The U.S. Department of Energy (DOE), Office of River Protection (ORP) is responsible for management and completion of the River Protection Project (RPP) mission, which comprises both the Hanford Site tank farms and the Waste Treatment and Immobilization Plant (WTP). The RPP mission is to store, retrieve and treat Hanford's tank waste; store and dispose of treated wastes; and close the tank farm waste management areas and treatment facilities in a safe, environmentally compliant, cost-effective and energy-effective manner.

  5. Natural Radionuclide Activity Concentrations In Spas Of Argentina

    SciTech Connect (OSTI)

    Gnoni, G.; Czerniczyniec, M.; Canoba, A.; Palacios, M.

    2008-08-07

    Geothermal waters have been used on a large scale for bathing, drinking and medical purposes. These waters can contain natural radionuclides that may increase the exposure to people. In this work the most important natural radionuclide activity concentrations in different thermal spas of Argentina were measured to characterize waters and to evaluate the exposure of workers and members of the public.

  6. ORISE: Media Analysis and Monitoring

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Analysis and Monitoring The Oak Ridge Institute for Science and Education (ORISE) uses comprehensive media analysis and monitoring tools to define media interest and the public's perceptions of a particular issue. ORISE's media analysis process includes analyzing news reports combined with media outlet data, such as circulation, readership, number of viewers and listeners; recording frequency of publication and collecting quotes from subject matter experts. To improve the overall

  7. DOE Media Advisory: Media Availability with Energy Secretary Steven Chu |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Media Advisory: Media Availability with Energy Secretary Steven Chu DOE Media Advisory: Media Availability with Energy Secretary Steven Chu June 12, 2012 - 12:00pm Addthis Media Contact Geoff Tyree Geoffrey.Tyree@rl.doe.gov 509-376-4171 Who: Secretary of Energy Steven Chu What: Speech to employees, followed by 15-minute media availability When: Friday, June 15, 2012, from 9:30 to 11:00 a.m. Where: Howard Amon Park, Richland, Wash. (park no later than 9:30, assemble near

  8. Open Media Training Session

    ScienceCinema (OSTI)

    None

    2011-10-06

    Have you ever wondered how the media work and why some topics make it into the news and other don't? Would you like to know how to (and how not to) give an interview to a journalist? With the LHC preparing for first collisions at high energies, the world's media are again turning their attention to CERN. We're all likely to be called upon to explain what is happening at CERN to media, friends and neighbours. The seminar will be given by BBC television news journalists Liz Pike and Nadia Marchant, and will deal with the kind of questions we're likely to be confronted with through the restart period. Follow the webcast: http://webcast.cern.ch/

  9. Luna Innovations | Open Energy Information

    Open Energy Info (EERE)

    materials and general technology company. The firm is developing organic photovoltaic cell materials. Coordinates: 37.271525, -79.940534 Show Map Loading map......

  10. Argentina: An Important All-of-the-Above Energy Partner | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Argentina: An Important All-of-the-Above Energy Partner Argentina: An Important All-of-the-Above Energy Partner June 16, 2014 - 5:03pm Addthis Deputy Energy Secretary Daniel Poneman, third from left, meets with Argentinian President Cristina Fernández de Kirchner in Argentina on May 22, 2014. | Photo courtesy of the U.S. State Department. Deputy Energy Secretary Daniel Poneman, third from left, meets with Argentinian President Cristina Fernández de Kirchner in Argentina on May 22,

  11. Argentina-NREL Bi-National Energy Working Group | Open Energy...

    Open Energy Info (EERE)

    Argentina-NREL Cooperation AgencyCompany Organization National Renewable Energy Laboratory Sector Energy Topics Background analysis Website http:www.nrel.govinternatio...

  12. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B

  13. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Admin Chg 1 dated 9-1-09. Canceled by DOE O 205.1B.

  14. Media Call Recording- SHINES

    Broader source: Energy.gov [DOE]

    On Tuesday, January 19, 2016, the SunShot Initiative hosted a media call to discuss the newly-announced projects that are part of the Sustainable and Holistic Integration of Energy Storage and Solar PV program, also known as SHINES.

  15. Nuclear rapprochement in Argentina and Brazil: Workshop summary

    SciTech Connect (OSTI)

    James E. Doyle

    1999-10-01

    On October 21 and 22, 1998, the Center for International Security Affairs at Los Alamos National Laboratory and the Center for Global Security and Cooperation at Science Applications International Corporation hosted the first of a series of work-shops on states that have chosen to roll back their pursuit of nuclear arms. The objective of the workshop series is to conduct a systematic evaluation of the roles played by U.S. nonproliferation policy in cases of nuclear rollback or restraint and to provide recommendations for future nonproliferation efforts based on lessons learned. Key attendees at the workshop included officials and former officials from the foreign ministries of Argentina and Brazil, and current and former officials from the U.S. Department of State, the Arms Control and Disarmament Agency (ACDA), and the Department of Energy (DOE). Scholars and independent researchers who have examined nuclear policy in Argentina and Brazil also participated. This workshop report includes important background information that helps set the stage for assessing nuclear policies in Argentina and Brazil. It describes national perspectives and areas of consensus and debate among the participants, particularly on the questions of lessons learned and their salience to proliferation challenges in other states. It also summarizes key questions and propositions regarding the roles played in these cases by U.S. nonproliferation policy.

  16. Social Media Records and You | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media Records and You Social Media Records and You PDF icon Social Media Records and You More Documents & Publications Social Media Records and You Social Media Toolkit ...

  17. Social Media | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media Social Media The Department of Energy is committed to expanding the conversation on energy issues and upholding open government principles of transparency, participation and collaboration. One of the key ways we seek to accomplish this is through the use of social media. "Social media" is a broad term for a wide spectrum of interactive and user-driven content technologies, including social networks like Twitter, Facebook, YouTube and Instagram. Like many government

  18. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 News Archive: 2007 SRNL to help in study of fusion [Aiken Standard, January 16, 2007] United States-Japan Cooperation on Energy Security [Media Newswire, January 11, 2007] ORNL researchers, supercomputer have large roles in DOE projects [ORNL News Release, January 9, 2007] SNS completion highlights year of ORNL achievements [The Oak Ridger, January 4, 2007] US and German Leaders Explore Climate Cooperation [Environment News Service, January 4, 2007] Head of US ITER project named IEEE Fellow

  19. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Newsletter Newsletter December 2015 July 2015 November 2014 February 2014 July 2013 January 2013 May 2012 December 2011 July 2011 March 2011 September 2010 Subscribe to the US ITER Newsletter Need an Expert? Media are welcome to contact Mark Uhran for assistance in reaching an appropriate US ITER expert. US ITER staff members are also available for presentations on fusion energy and the ITER project to technical, civic, community, and student groups. To make arrangements for a speaker, please

  20. Media contact: Release date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2010 media@wch-rcc.com Local veteran-owned small business gets ARRA funds to upgrade ERDF RICHLAND, Wash.-Washington Closure Hanford has awarded a subcontract worth nearly $7 million to ERLFowler, a local small business, to design and build an operations center and three maintenance facilities at Hanford's Environmental Restoration Disposal Facility. The new facilities are part of a $100 million expansion and upgrade of ERDF funded by the American Recovery and Reinvestment Act. The expansion

  1. Media contact: Release date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 10, 2010 media@wch-rcc.com Local business receives $30 million ARRA subcontract to expand landfill RICHLAND, Wash.-Washington Closure Hanford has awarded a subcontract worth up to $30 million to TradeWind Services, a service-disabled, veteran-owned small business based in Richland. The project, which will expand Hanford's Environmental Restoration Disposal Facility by 50 percent, is funded by the American Recovery and Reinvestment Act. ERDF is an engineered, low-level radioactive and

  2. Social Media Paying Tribute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Social Media Paying Tribute The NNSS has changed the way employees get information - turning more to Facebook and Twitter for messaging. EM issues its annual report on the environment at the NNSS. Diversity Council honors NSTec employee injured in serious accident. See page 8. See page 7. NNSS Helps Departments of Energy, Defense Dispose of Obsolete Classified Components The National Security Technologies (NSTec) Environmental Management group has stepped up with a new program that is helping

  3. Media contact: Release date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    12, 2010 media@wch-rcc.com River Corridor cleanup drivers reach 15 million miles RICHLAND, Wash.-The truck drivers working on the River Corridor Closure Project recently logged 15 million miles transporting waste for disposal at Hanford's Environmental Restoration Disposal Facility. That is the equivalent of more than 600 trips around the Earth. ERDF is the onsite disposal facility for cleanup wastes at the 586-square-mile Hanford Site in south-central Washington state. Most of the 9.3 million

  4. Media contact: Release date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 24, 2010 media@wch-rcc.com Local business receives $3.8 million ARRA cleanup subcontract RICHLAND, Wash.-Washington Closure Hanford has awarded a subcontract worth $3.8 million to Ojeda Business Ventures of Richland. The subcontract is to cleanup 13 waste sites, with an option for cleanup of additional waste sites as needed, in Hanford's F Area. Funding for the work comes from the American Recovery and Reinvestment Act. The sites being cleaned up include a coal pit, underground piping and

  5. Media contact: Release date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 7, 2010 media@wch-rcc.com Local company receives $3.7 million in Recovery Act funds to provide Hanford utilities RICHLAND, Wash.-Washington Closure Hanford has awarded a subcontract worth nearly $3.7 million to White Shield/Apollo, a small, disadvantaged joint venture between White Shield Inc. of Pasco and Apollo Inc. of Kennewick. The subcontract is to install water, electricity, roads, office trailers and waste container transfer areas at the 618-10 Burial Ground at Hanford. Funding for

  6. Media Contacts | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Contacts Matthew Howard Argonne National Laboratory Matthew Howard is Argonne's Director of Communications, Education and Public Affairs. Christopher J. Kramer Argonne National Laboratory Christopher J. Kramer is the manager of media relations and external affairs for Argonne. Contact him at 630-252-5580 or media@anl.gov. Tona Kunz Argonne National Laboratory Tona Kunz is a public information officer who covers X-ray science research at Argonne's Advanced Photon Source. Contact her at

  7. Communications and Media Relations Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Communications and Media Relations Group Public Affairs Communications Community Public Affairs Org Chart Education Creative Services ⇒ Navigate Section Public Affairs Communications Community Public Affairs Org Chart Education Creative Services Berkeley Lab's Communications and Media Relations Group is responsible for gathering, reporting, and disseminating news about the Lab to both internal and external audiences, including employees, the media, and the community. The latest news can be

  8. Greentech Media | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Greentech media Address: 1132 massachusetts avenue Place: Cambridge, Massachusetts Zip: 02138 Region: Greater Boston Area Number of Employees: 11-50...

  9. Porous polymer media

    DOE Patents [OSTI]

    Shepodd, Timothy J.

    2002-01-01

    Highly crosslinked monolithic porous polymer materials for chromatographic applications. By using solvent compositions that provide not only for polymerization of acrylate monomers in such a fashion that a porous polymer network is formed prior to phase separation but also for exchanging the polymerization solvent for a running buffer using electroosmotic flow, the need for high pressure purging is eliminated. The polymer materials have been shown to be an effective capillary electrochromatographic separations medium at lower field strengths than conventional polymer media. Further, because of their highly crosslinked nature these polymer materials are structurally stable in a wide range of organic and aqueous solvents and over a pH range of 2-12.

  10. Using Social Media in Exercises

    SciTech Connect (OSTI)

    Donaldson, Jeff

    2014-04-28

    This presentation discusses the use of social media as a tool during the full-scale exercise Tremor-14 in Las Vegas, and examines Lessons Learned as a path forward in using social media to disseminate Emergency Public Information (EPI) on a regular basis.

  11. Social Media Requirements and Best Practices

    Broader source: Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy (EERE) has standards for its social media: blogs, Facebook, Flickr, Twitter, Vimeo, and YouTube. If you have questions about social media, contact your office's media team contact.

  12. Solar energy in Argentina: a profile of renewable energy activity in its national context

    SciTech Connect (OSTI)

    Hawkins, D.

    1981-01-01

    The following subjects are included: the country overview; the energy summary; the geopolitical, economic, and cultural aspects of the Republic of Argentina; the energy profile; and international contacts, manufacturers, and projects. (MHR)

  13. Social Media's New Role in Emergency Management

    SciTech Connect (OSTI)

    Ethan Huffman; Sara Prentice

    2008-03-01

    As technology continues to evolve, emergency management organizations must adapt to new ways of responding to the media and public. This paper examines a brief overview of social media's new role in emergency management. This includes definitions of social media, the benefits of utilizing social media, examples of social media being used and finally a discussion of how agencies, such as Department of Energy national laboratories, can begin including social media in their emergency management plans.

  14. Microsoft Word - MediaTechnology bh

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clusters and Structural Grains in Magnetic Recording Media Historically, areal density increases in longitudinal hard disk drive media technology have been driven by...

  15. Biofuels Media Ltd | Open Energy Information

    Open Energy Info (EERE)

    Media Ltd Jump to: navigation, search Name: Biofuels Media Ltd. Place: London, Greater London, United Kingdom Zip: W6 0HX Product: London-based conference organiser Coordinates:...

  16. Marketing & Driving Demand: Social Media Tools & Strategies ...

    Office of Environmental Management (EM)

    Marketing & Driving Demand: Social Media Tools & Strategies - January 16, 2011 (Text Version) Marketing & Driving Demand: Social Media Tools & Strategies - January 16, 2011 (Text...

  17. ORISE: Media Analysis and Monitoring

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    such as AutoINFORM (Auto Immunization News FOR Managers), that enable the monitoring of social media, email and other Web content. On average, ORISE tracks, codes and analyzes...

  18. Media Releases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Media Releases Media Releases March 1, 2016 Lockheed Martin Agrees to Pay $5 Million to Settle False Claims Act Allegations February 26, 2016 Three Arrested and Charged in a Scheme to Defraud Federal Research Funding December 16, 2015 Two Men Charged With Wire Fraud December 15, 2015 Former Russian Nuclear Energy Official Sentenced to Four Years in Prison for Money Laundering Conspiracy October 21, 2015 OIG Receives Prestigious CIGIE Award September 24, 2015 Argonne National Laboratory Employee

  19. Sandia National Laboratories: Social Media

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Social Media Modeling and Simulation Join the Conversation Sandia operates official accounts on several social media networks as a means to engage in conversations about our work, update followers about the latest Labs news, share employment opportunities, and support the open government principles of transparency, participation and collaboration. Connect with us on the following networks: Facebook logo Facebook facebook.com/ SandiaLabs Google Plus logo Google+ plus.google.com/ +SandiaGov/

  20. Media advisory: breakfast and brilliance . . .

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Creating our tomorrows, LDRD Day 2012 Media advisory: breakfast and brilliance . . . Media are invited to the annual celebration of Laboratory Directed Research and Development (LDRD) projects on October 23. October 17, 2012 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos

  1. Sandia National Laboratories: Sandia Digital Media

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia Digital Media Now Playing Featured Categories At Sandia Community Service Energy Engineering - Nuclear Health-Safety Historical Material National Security Sciences and Engineering Technical Training Search Videos Webinars There are no current webinars at this time. For Media Browse Sandia's Media B-Roll. For additional information, view Sandia's Media Contacts and Resources page.

  2. Argentina: the road to energy independence. Part Two. Non-petroleum

    SciTech Connect (OSTI)

    Not Available

    1982-12-24

    Argentina has the most-advanced nuclear technology in Latin America, but budget cuts have slowed down some projects. Potential hydroelectric power is sufficient to fill Argentina's electrical needs, but the Yacireta complex, a joint venture with Paraguay, will be completed almost two years behind schedule. There is plenty of coal in Argentina, but it needs to import coal and coke to produce cast iron and steel. Geothermal and wind energy represent viable alternatives, but more funds and research are needed to exploit their potential. Argentina is on the road to energy independence, but with a new constitutional government possible in 1984, a shift in national energy policy is also possible. Any resultant increase in petroleum consumption to fuel rapid industrial development and stimulate employment could turn Argentina back into an oil-importing Third World nation. The Energy Detente fuel price/tax series and the principal industrial-fuel prices for December 1982 are included for the countries of the Western Hemisphere.

  3. Zinc enhanced hard disk media

    DOE Patents [OSTI]

    Zou, Jie; Lambeth, David N.; Laughlin, David E.

    2002-01-01

    The present invention provides a magnetic recording media incorporating Zn containing layers in close proximity to a magnetic layer to provide media having increased coercivity and lower noise. The Zn containing layer can be incorporated in a rotating, translating or stationary recording media to operate in conjunction with magnetic transducing heads for recording and reading of magnetic data, as well as other applications. The magnetic recording medium of the invention preferably includes a Co or Co alloy film magnetic layer, underlayer structures to promote epitaxial crystalline structure in the magnetic layer, and a Zn containing layer to promote isolation between the magnetic grains. The medium can further include seed layers, underlayers, intermediate layers, and overlayers. The process of manufacture includes promoting diffusion of Zn to the magnetic layer grain boundaries.

  4. Composite media for ion processing

    DOE Patents [OSTI]

    Mann, Nick R.; Wood, Donald J.; Todd, Terry A.; Sebesta, Ferdinand

    2009-12-08

    Composite media, systems, and devices for substantially removing, or otherwise processing, one or more constituents of a fluid stream. The composite media comprise a plurality of beads, each having a matrix substantially comprising polyacrylonitrile (PAN) and supporting one or more active components which are effective in removing, by various mechanisms, one or more constituents from a fluid stream. Due to the porosity and large surface area of the beads, a high level of contact is achieved between composite media of the present invention and the fluid stream being processed. Further, the homogeneity of the beads facilitates use of the beads in high volume applications where it is desired to effectively process a large volume of flow per unit of time.

  5. Social Media Records and You | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media Records and You Social Media Records and You How to manage social media records PDF icon Social Media Records and You More Documents & Publications Social Media Records and You Social Media Toolkit Social Media for Natural Disaster Response and Recovery

  6. Shear waves in acoustic anisotropic media (Journal Article) ...

    Office of Scientific and Technical Information (OSTI)

    Shear waves in acoustic anisotropic media Citation Details In-Document Search Title: Shear waves in acoustic anisotropic media Acoustic transversely isotropic (TI) media are ...

  7. Webtrends Archives by Fiscal Year - Social Media Site | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media Site Webtrends Archives by Fiscal Year - Social Media Site From the EERE Web Statistics Archive: Corporate sites, Webtrends archives for the Social Media site for ...

  8. Energy Media Advisories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Media Advisories Energy Media Advisories RSS February 4, 2016 Energy Secretary Moniz to Hold Media Briefing on Energy Department's Fiscal Year 2017 Budget Request WASHINGTON- On Tuesday, February 9, 2016, U.S. Department of Energy Secretary Ernest Moniz will hold a media briefing on DOE's Fiscal Year 2017 Budget Request, outlining DOE's proposed investments in research and development, basic science, nuclear stockpile management, and DOE's other core responsibilities. February 1, 2016 ARPA-E's

  9. CMI Social Media | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Social Media Facebook: Critical Materials Institute Twitter: CMI_hub LinkedIn: Critical Materials Institute Flickr: Critical Materials Institute

  10. How to Work With the Media Webinar

    Broader source: Energy.gov [DOE]

    How to Work With the Media Webinar, from the U.S. Department of Energy's Better Buildings Neighborhood Program.

  11. Global Social Media Directory. A Resource Guide

    SciTech Connect (OSTI)

    Noonan, Christine F.; Piatt, Andrew W.

    2015-10-01

    Social media platforms are internet-based applications focused on broadcasting user-generated content. While primarily web-based, these services are increasingly available on mobile platforms. Communities and individuals share information, photos, music, videos, provide commentary and ratings/reviews, and more. In essence, social media is about sharing information, consuming information, and repurposing content. Social media technologies identified in this report are centered on social networking services, media sharing, blogging and microblogging. The purpose of this Resource Guide is to provide baseline information about use and application of social media platforms around the globe. It is not intended to be comprehensive as social media evolves on an almost daily basis. The long-term goal of this work is to identify social media information about all geographic regions and nations. The primary objective is that of understanding the evolution and spread of social networking and user-generated content technologies internationally.

  12. METAL MEDIA FILTERS, AG-1 SECTION FI

    SciTech Connect (OSTI)

    Adamson, D.

    2012-05-23

    One application of metal media filters is in various nuclear air cleaning processes including applications for protecting workers, the public and the environment from hazardous and radioactive particles. To support this application the development of the ASME AG-1 FI Standard on Metal Media has been under way for more than ten years. Development of the proposed section has required resolving several difficult issues associated with operating conditions (media velocity, pressure drop, etc.), qualification testing, and quality acceptance testing. Performance characteristics of metal media are dramatically different than the glass fiber media with respect to parameters like differential pressures, operating temperatures, media strength, etc. These differences make existing data for a glass fiber media inadequate for qualifying a metal media filter for AG-1. In the past much work has been conducted on metal media filters at facilities such as Lawrence Livermore National Laboratory (LLNL) and Savannah River National Laboratory (SRNL) to qualify the media as High Efficiency Particulate Air (HEPA) Filters. Particle retention testing has been conducted at Oak Ridge Filter Test Facility and at Air Techniques International (ATI) to prove that the metal media meets or exceeds the 99.97% particle retention required for a HEPA Filter. Even with his testing, data was lacking to complete an AG-1 FI Standard on metal media. With funding secured by Mississippi State University (MSU) from National Nuclear Security Administration (NNSA), a research test stand is being designed and fabricated at MSU's Institute for Clean Energy Technology (ICET) Facility to obtain qualification data on metal media. This in turn will support required data needed for the FI Standard. The paper will discuss in detail how the test stand at MSU will obtain the necessary data to complete the FI Standard.

  13. BioenergizeME Social Media Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ƈ GOAL: SOCIAL MEDIA GUIDE Share what you have learned about bioenergy through an 11-day social media campaign! Assign team roles Plan a strategy & timeline Start your campaign & monitor progress HOW TO DO IT: Determine what role each person will play in the campaign. 1. Team Director Lead and organize your team, keep your team on schedule, and monitor progress (views, likes, and shares) during your social media campaign. 2. Content Manager Determine key messages you want to convey to

  14. Jefferson Lab Public Affairs: Electronic Media

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electronic Media Privacy and Security Notice Skip over navigation Search the JLab Site Electronic Media Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? Electronic Media Navigation About Public Affairs Web Design Photography Video Portfolio print version Staff Dean Golembeski Manager (x7689) photo@jlab.org Photography/Video (x5102 ) Joanna Griffin Graphics/Multimedia (x7209)

  15. Information for Media | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information for Media Information for Media Registration The 2014 SunShot Grand Challenge Summit and Peer Review welcomes accredited journalists who work for a recognized outlet and cover the energy industry on a regular basis to apply for a complimentary press pass. Freelancers will not be accredited unless they are assigned by a recognized media outlet and meet all other requirements. In order to receive a complimentary press pass, please send your name, contact information, and affiliation to

  16. Better Buildings Residential Network Social Media Toolkit

    Energy Savers [EERE]

    Social Media Toolkit BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.gov/bbrn 1 T his Better Buildings Residential Network toolkit can be used to help residential energy efficiency programs learn to engage potential customers through social media. Social media can build brand awareness concerning home energy upgrades and the entities working on them, which can lead to more energy upgrade projects taking place in the long run. Residential Network members provided input

  17. Marketing & Driving Demand Collaborative - Social Media Tools...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Marketing & Driving Demand Collaborative - Social Media Tools & Strategies Presentation slides from the Better Buildings webinar on January 6, 2011. PDF icon Marketing & Driving ...

  18. [pic] EERE Web Site Statistics - Social Media

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EERE Web Site Statistics - Social Media Custom View: 10110 - 93011 October 1, 2010 ... site compels visitors to return. Updating web site content is one way to draw return ...

  19. BioenergizeME Social Media Campaign

    Broader source: Energy.gov [DOE]

    The BioenergizeME Social Media campaign for the Spring 2015 BioenergizeME Infographic Challenge takes place April 13–23, 2015.

  20. Energy Media Advisories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Administration officials will join California Governor Jerry Brown, Los Angeles Mayor Eric Garcetti and state, local and tribal leaders from across the country for a media...

  1. BioenergizeME Social Media Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3. Engagement Manager Identify the various social media networks (Twitter, Instagram, Facebook, etc.) for your campaign. Respond to questions and comments from followers. Plan...

  2. Sorption Capacity of Europium for Media #1 and Media #2 from Solution at Ambient Temperature

    SciTech Connect (OSTI)

    Gary Garland

    2015-03-16

    This dataset shows the capacity for Europium of media #1 and media #2 in a shakertable experiment. The experimental conditions were 150mL of 500ppm Eu solution, 2g of media, pH of 3.2, at ambient temperature.

  3. Method And Apparatus For Arbitrarily Large Capacity Removable Media

    DOE Patents [OSTI]

    Milligan, Charles A.; Hughes, James P.; Debiez; Jacques

    2003-04-08

    A method and apparatus to handle multiple sets of removable media within a storage system. A first set of removable media are mounted on a set of drives. Data is accepted until the first set of removable media is filled. A second set of removable media is mounted on the drives, while the first set of removable media is removed. When the change in removable media is complete, writing of data proceeds on the second set of removable media. Data may be buffered while the change in removable media occurs. Alternatively, two sets of removable media may be mounted at the same time. When the first set of removable media is filled to a selected amount, the second set of removable media may then be used to write the data. A third set of removable media is set up or mounted for use, while the first set of removable media is removed.

  4. Environmental Levels Of 129I Present In Bovine Thyroid And Fresh Water In Argentina

    SciTech Connect (OSTI)

    Negri, A. E.; Arazi, A.; Carnellia, P. F. F.; Barbara, E. de; Figueira, J. M.; Fimiani, L.; Heimanna, D. M.; Zalazara, L.; Fernandez Niello, J.; La Gamma, A. M.; Wallner, A.

    2010-08-04

    Concentrations of {sup 129}I in bovine thyroid and fresh water samples coming from all over Argentina were analyzed by Accelerator Mass Spectrometry (AMS) and total iodine present in samples by Gas Chromatography (GC) and Inductive Coupled Plasma Mass Spectrometry (ICP-MS), respectively. Once we complete this study, it will be the first set of data of this kind from an extended region of the south American subcontinent.

  5. Digital reverse propagation in focusing Kerr media

    SciTech Connect (OSTI)

    Goy, Alexandre; Psaltis, Demetri

    2011-03-15

    Lenses allow the formation of clear images in homogeneous linear media. Holography is an alternative imaging method, but its use is limited to cases in which it provides an advantage, such as three-dimensional imaging. In nonlinear media, lenses no longer work. The light produces intensity-dependent aberrations. The reverse propagation method used in digital holography to form images from recorded holograms works even in Kerr media [M. Tsang, D. Psaltis, and F. G. Omenetto, Opt. Lett. 28, 1873 (2003).]. The principle has been experimentally demonstrated recently in defocusing media [C. Barsi, W.Wan, and J.W. Fleischer, Nat. Photonics 3, 211 (2009).]. Here, we report experimental results in focusing media.

  6. How to Work with the Media | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    How to Work with the Media How to Work with the Media How to Work with the Media, slides presented during a Better Buildings webinar on April 27, 2011. PDF icon How to Work with the Media More Documents & Publications April 27, 2011 - How to Work with the Media Webinar (text version) SEP and EECBG program communications resource kit Marketing & Driving Demand Collaborative - Social Media Tools & Strategies

  7. Green Builder Media /Green Builder College | Open Energy Information

    Open Energy Info (EERE)

    Builder Media Green Builder College Jump to: navigation, search Name: Green Builder Media Green Builder College Place: Cincinnati, OH Website: www.greenbuildermag.com...

  8. Swipe Left, Power Down: Using Interactive Media to Instill Behavior...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301) Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301) June

  9. Energy Saver Blog and Social Media Guidelines | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Saver Blog and Social Media Guidelines Energy Saver Blog and Social Media Guidelines EERE's offices are encouraged to provide content to the EERE Facebook (for general EERE ...

  10. An Acoustic Wave Equation for Tilted Transversely Isotropic Media...

    Office of Scientific and Technical Information (OSTI)

    An Acoustic Wave Equation for Tilted Transversely Isotropic Media Citation Details In-Document Search Title: An Acoustic Wave Equation for Tilted Transversely Isotropic Media ...

  11. Media invited to join students in crystallography experiment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media invited to join students in crystallography experiment Media invited to join students in crystallography experiment The student outreach effort is part of the events...

  12. Characterization of fluid distributions in porous media by NMR...

    Office of Scientific and Technical Information (OSTI)

    Characterization of fluid distributions in porous media by NMR techniques Citation Details In-Document Search Title: Characterization of fluid distributions in porous media by NMR ...

  13. Sanraa Media Limited India formerly Sanra Software | Open Energy...

    Open Energy Info (EERE)

    Sanraa Media Limited India formerly Sanra Software Jump to: navigation, search Name: Sanraa Media Limited India (formerly Sanra Software) Place: Chennai, Tamil Nadu, India Zip:...

  14. Social Media and Messages that Matter - Top Tips and Tools |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media and Messages that Matter - Top Tips and Tools Better Buildings Residential Network Peer Exchange Call Series: Social Media and Messages that Matter - Top Tips and ...

  15. Development of Model Filtration Media for Investigating Size...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development of Model Filtration Media for Investigating Size-Dependent Filtration Efficiency A novel method for fabricating custom porous filtration media for emission control has ...

  16. Deputy Secretary Poneman to Host Media Briefing on Energy Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Host Media Briefing on Energy Department FY 2014 Budget Request Deputy Secretary Poneman to Host Media Briefing on Energy Department FY 2014 Budget Request April 9, 2013 -...

  17. Project Profile: Indirect, Dual-Media, Phase Changing Material...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Indirect, Dual-Media, Phase Changing Material Modular Thermal Energy Storage System Project Profile: Indirect, Dual-Media, Phase Changing Material Modular Thermal Energy Storage ...

  18. Kinetics, Mechanics and Microstructure Changes in Storage Media...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Kinetics, Mechanics and Microstructure Changes in Storage Media Kinetics, Mechanics and Microstructure Changes in Storage Media Presentation on the Kinetics, Mechanics and ...

  19. Age Inversiones in Media Ambiente AIMA | Open Energy Information

    Open Energy Info (EERE)

    Inversiones in Media Ambiente AIMA Jump to: navigation, search Name: Age Inversiones in Media Ambiente (AIMA) Place: Spain Product: Invests in projects that aim to generate energy...

  20. Project Profile: Sensible Heat, Direct, Dual-Media Thermal Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sensible Heat, Direct, Dual-Media Thermal Energy Storage Module Project Profile: Sensible Heat, Direct, Dual-Media Thermal Energy Storage Module Acciona logo Acciona Solar, under ...

  1. Integrated Energy Systems Multi-Media Webcast: Three CHP Sites...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multi-Media Webcast: Three CHP Sites Yield Important Lessons Learned, September 2005 Integrated Energy Systems Multi-Media Webcast: Three CHP Sites Yield Important Lessons Learned, ...

  2. Gas fluidized-bed stirred media mill

    DOE Patents [OSTI]

    Sadler, III, Leon Y.

    1997-01-01

    A gas fluidized-bed stirred media mill is provided for comminuting solid ticles. The mill includes a housing enclosing a porous fluidizing gas diffuser plate, a baffled rotor and stator, a hollow drive shaft with lateral vents, and baffled gas exhaust exit ports. In operation, fluidizing gas is forced through the mill, fluidizing the raw material and milling media. The rotating rotor, stator and milling media comminute the raw material to be ground. Small entrained particles may be carried from the mill by the gas through the exit ports when the particles reach a very fine size.

  3. WIPP - Passive Institutional Controls (PICs) Media

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Los Angeles Times An Alert Unlike Any Other Interactive feature from LA Times story Weekend America Radio sound file U.S. News Village Voice Las Vegas Review Journal...

  4. Global Social Media Directory: A Resource Guide

    SciTech Connect (OSTI)

    Noonan, Christine F.; Piatt, Andrew W.

    2014-10-23

    The Global Social Media Directory is a resource guide providing information on social networking services around the globe. This information changes rapidly, therefore, this document will be updated on a regular basis and as funding permits.

  5. Energy Media Advisories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the National Mall's West Potomac Park in Washington, D.C. Solar Decathlon 2011 Opens To Media This Week WASHINGTON, DC - Collegiate teams featuring over 4,000 students from around...

  6. Energy Media Advisories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to provide advice and recommendations as well receive public comments on the report. Media wishing to attend should contact Niketa Kumar at niketa.kumar@hq.doe.gov by 5pm on...

  7. News and Media | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News and Media News and Media Science in St. Louis | Dr. Michael Fix Monster in the Hollow - The Story of Missouri's Ozark Dinosaurs PARC Periodical | Volume 7, Issue 3 Science in St. Louis | Dr. Benjamin Kumfer An Introduction to Carbon Capture, Utilization, and Storage Artificial Photosynthesis: An Alternative to Fuel Cell Development Photosynthesis research at Oak Ridge National Laboratory Ultrafast Laser Facility - Virtual Tour A look at the technology and science in the Ultrafast lab PARC

  8. Second Line of Defense, Port of Buenos Aires and Exolgan Container Terminal Operational Testing and Evaluation Plan, Buenos Aires, Argentina

    SciTech Connect (OSTI)

    Roberts, Bryan W.

    2012-08-23

    The Office of the Second Line of Defense (SLD) Megaports project team for Argentina will conduct operational testing and evaluation (OT&E) at Exolgan Container Terminal at the Port of Dock Sud from July 16-20, 2012; and at the Port of Buenos Aires from September 3-7, 2012. SLD is installing radiation detection equipment to screen export, import, and transshipment containers at these locations. The purpose of OT&E is to validate and baseline an operable system that meets the SLD mission and to ensure the system continues to perform as expected in an operational environment with Argentina Customs effectively adjudicating alarms.

  9. BioenergizeME Infographic Challenge Social Media Guide | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Social Media Guide BioenergizeME Infographic Challenge Social Media Guide Social Media Guide for the BioenergizeME Infographic Challenge. PDF icon bioenergizeme_social_media_guide.pdf More Documents & Publications BioenergizeME Infographic Challenge Flyer BioenergizeME Infographic Challenge Toolkit Webinar: BioenergizeME Office Hours Webinar: Guide to the 2016 BioenergizeME Infographic Challenge

  10. Source: Greentech Media; http://www.greentechmedia.com/articles...

    Broader source: Energy.gov (indexed) [DOE]

    Source: Greentech Media; http:www.greentechmedia.comarticlesreadchart-of-the-day- solyndra-edition...

  11. Fluid Flow and Infiltration in Structured Fibrous Porous Media

    SciTech Connect (OSTI)

    Papathanasiou, Thanasis D.

    2006-08-09

    Present the results of an extensive computational investigation of flow through structured fibrous media.

  12. Social Media for Natural Disaster Response and Recovery | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Social Media for Natural Disaster Response and Recovery Social Media for Natural Disaster Response and Recovery PDF icon Social Media for Natural Disaster Response and Recovery More Documents & Publications EERE Annual Website Reports Energy Saver Blog and Social Media Guidelines Social Media and the NRC: What We're Doing, Why We're Doing It, and What Else We Might Do

  13. Economic and Non-proliferation Policy Considerations of Uranium Enrichment in Brazil and Argentina

    SciTech Connect (OSTI)

    Short, Steven M.; Phillips, Jon R.; Weimar, Mark R.; Mahy, Heidi A.

    2008-09-01

    The nuclear development programs of both Argentina and Brazil have, since the 1970s, been premised on the desire for self-sufficiency and assurance of nuclear fuel supply. While military rivalry and mutual distrust led to nuclear weapons related development programs in the 1970s and 1980s, both countries have since terminated these programs. Furthermore, the governments of both countries have pledged their commitment to exclusively non-explosive use of nuclear energy and have signed the Non Proliferation Treaty (NPT). Utilizing rights provided for under the NPT, both Argentina and Brazil have nuclear fuel production facilities, with the notable exception of enrichment plants, that provide much of the current indigenous fuel requirements for their nuclear power plants. However, both countries are actively developing enrichment capability to fill this gap. The purpose of this report is to assess the economic basis and non-proliferation policy considerations for indigenous enrichment capability within the context of their desired self-sufficiency and to evaluate possible United States Government policy options.

  14. Biodegradation of ion-exchange media

    SciTech Connect (OSTI)

    Bowerman, B.S.; Clinton, J.H.; Cowdery, S.R.

    1988-01-01

    The purpose of this study was to investigate further the potential for ion-exchange media (resin beads or powdered filter media) to support biological growth. A mixed microbial culture was grown from resin wastes obtained from the BNL HFBR by mixing the resin with a nutrient salt solution containing peptone and yeast extract. Bacterial and fungal growths appeared in the solution and on the resins after 7 to 10 days incubation at 337)degree)C. The mixed microbial cultures were used to inoculate several resin types, both irradiated and unirradiated. 12 refs., 5 tabs.

  15. Energy Saver Blog and Social Media Guidelines

    Broader source: Energy.gov [DOE]

    EERE's offices are encouraged to provide content to the EERE Facebook (for general EERE communications) or to the Energy Saver Facebook (for general public and consumer-oriented communications). If you're interested in posting on the Energy Saver Facebook, read these blog and social media guidelines.

  16. Fukushima Media Involvement: Lessons Learned and Challenges

    SciTech Connect (OSTI)

    Harvey, Geoffrey L.; Koller, Greg L.; Johnson, Wayne L.

    2013-04-01

    Only days after the Fukushima nuclear reactor disaster on March 11, 2011, the Department of Energy’s Pacific Northwest National Laboratory, or PNNL, found itself in a maelstrom of media attention following announcement of the detection of minute levels of radioactive material originating from the damaged reactors 4,500 miles away. Within days, PNNL had set up a technical team in support of the U.S. government’s efforts to assist the devastated country. While a vast amount of information began to flow from Japan, the situation rapidly evolved challenging PNNL scientists and engineers, as well as news media and the general public to deal with a complex and often conflicting information stream. Over the course of about three weeks, PNNL’s News & Media Relations staff and its scientists and engineers responded to more than one hundred requests for information, and engaged in dozens of personal interviews with international, national, regional and local media. While many of the interviews and resulting stories were accurate and well done, to say that all communication went flawless would be far from the truth. In the midst of chaos and confusion, which are part of any significant crisis, hiccoughs are sure to occur. Even when communications guidelines are established and agreed-to ahead of time, and spokespeople promise to stay on message and within their areas of expertise, there is no guarantee the ball will not be dropped on occasion. Addressed here is “the rest of the story.”

  17. Saving Energy and Social Media | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media Saving Energy and Social Media May 23, 2012 - 12:56pm Addthis Drew Bittner WriterEditor, Office of Energy Efficiency and Renewable Energy I'm on Facebook rather...

  18. Fluid Flow Model Development for Representative Geologic Media

    Broader source: Energy.gov [DOE]

    Clay and granitic geologic rock units are potential host media for future repositories for used nuclear fuel and high level waste. This report addresses the representation of flow in these two media within numerical process (discrete fracture network) models.

  19. Media Advisory: News Media invited to cover Feb. 10 Virginia Regional High

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    School Science Bowl at Jefferson Lab; 19 teams competing | Jefferson Lab invited to cover Feb. 10 Virginia Regional High School Science Bowl at Jefferson Lab; 19 teams competing Media Advisory: News Media invited to cover Feb. 10 Virginia Regional High School Science Bowl at Jefferson Lab; 19 teams competing January 30, 2007 The Department of Energy's Jefferson Lab in Newport News, Va., is hosting this year's Virginia Regional High School Science Bowl on Saturday, Feb. 10. Nineteen teams,

  20. Media Advisory: News Media invited to cover March 11 Virginia Regional

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Middle School Science Bowl at JLab | Jefferson Lab invited to cover March 11 Virginia Regional Middle School Science Bowl at JLab MEDIA ADVISORY: News Media invited to cover March 11 Virginia Regional Middle School Science Bowl at Jefferson Lab; 9 teams competing March 9, 2006 The Department of Energy's Jefferson Lab in Newport News, Va., is hosting the 2006 Virginia Regional Middle School Science Bowl on Saturday, March 11. Nine teams, representing middle schools from Tidewater/Hampton

  1. Media Advisory: News Media is invited to cover Feb. 11 Virginia Regional

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High School Science Bowl at JLab | Jefferson Lab is invited to cover Feb. 11 Virginia Regional High School Science Bowl at JLab MEDIA ADVISORY: News Media invited to cover Feb. 11 Virginia Regional High School Science Bowl at Jefferson Lab; 23 teams competing February 3, 2006 The Department of Energy's Jefferson Lab in Newport News, Va., is hosting this year's Virginia Regional High School Science Bowl on Saturday, Feb. 11. Twenty-three teams, representing high schools from across the state

  2. ORISE: Media Center | New Releases, Videos, Publications, and other press

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    resources Media Center Looking for the latest news about the Oak Ridge Institute for Science and Education (ORISE)? The ORISE Media Center offers an extensive collection of media resources, including news releases, photos, media contacts, links to ORISE publications, background information and videos. News Releases ORISE now accepting applications for EERE Postdoctoral Research Awards April 19, 2016 - ORISE, a U.S. Department of Energy (DOE) institute, is seeking Ph.D. researchers for a

  3. Marketing & Driving Demand Collaborative - Social Media Tools & Strategies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy & Driving Demand Collaborative - Social Media Tools & Strategies Marketing & Driving Demand Collaborative - Social Media Tools & Strategies Presentation slides from the Better Buildings webinar on January 6, 2011. PDF icon Marketing & Driving Demand Collaborative More Documents & Publications Using Social Media for Long-Term Branding Marketing & Driving Demand: Social Media Tools & Strategies - January 16, 2011 (Text Version) Generating

  4. MediaWiki:Mainpage-description | Open Energy Information

    Open Energy Info (EERE)

    Mainpage-description Jump to: navigation, search Main page Retrieved from "http:en.openei.orgwikiMediaWiki:Mainpage-description...

  5. Vehicle Technologies Office: Information for Members of Media | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy News » Vehicle Technologies Office: Information for Members of Media Vehicle Technologies Office: Information for Members of Media The Vehicle Technologies Office provides photos, videos, and contact information for members of the media to cover Vehicle Technologies Office-related news. Photos Members of the media may use the following photos. For low-resolution images, click on an image below. Photo of an engine. Photo of a hybrid electric bus. Photo of a man fueling a natural

  6. Webtrends Archives by Fiscal Year - Social Media Site | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Social Media Site Webtrends Archives by Fiscal Year - Social Media Site From the EERE Web Statistics Archive: Corporate sites, Webtrends archives for the Social Media site for fiscal year 2011. Microsoft Office document icon Social Media FY11 More Documents & Publications Webtrends Archives by Fiscal Year - Energy Basics Webtrends Archives by Fiscal Year - Topic Landing Pages Webtrends Archives by Fiscal Year - Office of EERE

  7. Workplace Charging Challenge Partner: Common Media | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Common Media Workplace Charging Challenge Partner: Common Media Workplace Charging Challenge Partner: Common Media Joined the Challenge: March 2016 Headquarters: Hadley, MA Charging Location: Hadley, MA Domestic Employees: 18 Common Media occupies a farmhouse in Hadley, MA directly off a bike path and just over the river from some really amazing restaurants, shops, and other great local businesses. While the company encourages employees to not only bike to and from work, we also encourage the

  8. EERE Website and Digital Media Standards and Guidelines | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Website and Digital Media Standards and Guidelines EERE Website and Digital Media Standards and Guidelines Find guidance on EERE's requirements, standards, and best practices for websites and other digital media such as applications, videos, and social media. This includes guidance on writing, design, development, maintenance, content analysis, and user experience research. Getting Approval for Websites Do you know that you need approval to start a Web project, and approval to go

  9. Information for Media on Lighting Choices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Media on Lighting Choices Information for Media on Lighting Choices Information for Media on Lighting Choices These videos, presentation, and images are available for use by media organizations. The materials are copyright-free, and you are welcome to cite the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy as the source. Videos A residential home is shown with newer lighting choices that save energy and money. All of the lightbulbs in this video meet the new energy

  10. Secretary Moniz's Media Briefing on Energy Department FY2015 Budget

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Request -- As Delivered | Department of Energy Media Briefing on Energy Department FY2015 Budget Request -- As Delivered Secretary Moniz's Media Briefing on Energy Department FY2015 Budget Request -- As Delivered March 4, 2014 - 3:25pm Addthis Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy MEDIA View the Secretary's powerpoint presentation. Watch video footage of the media briefing. Welcome, everyone. I will say right of the bat I am at a bit of a disadvantage in not actually being

  11. State-of-the-Art of Social Media Analytics Research

    SciTech Connect (OSTI)

    Gastelum, Zoe N.; Whattam, Kevin M.

    2013-01-01

    Overview of current state-of-the-art of social media for NTI Working Group III: Societal Verification

  12. Ion processing element with composite media

    DOE Patents [OSTI]

    Mann, Nick R. (Blackfoot, ID); Tranter, Troy J. (Idaho Falls, ID); Todd, Terry A. (Aberdeen, ID); Sebesta, Ferdinand (Prague, CZ)

    2003-02-04

    An ion processing element employing composite media disposed in a porous substrate, for facilitating removal of selected chemical species from a fluid stream. The ion processing element includes a porous fibrous glass substrate impregnated by composite media having one or more active components supported by a matrix material of polyacrylonitrile. The active components are effective in removing, by various mechanisms, one or more constituents from a fluid stream passing through the ion processing element. Due to the porosity and large surface area of both the composite medium and the substrate in which it is disposed, a high degree of contact is achieved between the active component and the fluid stream being processed. Further, the porosity of the matrix material and the substrate facilitates use of the ion processing element in high volume applications where it is desired to effectively process a high volume flows.

  13. Ion processing element with composite media

    DOE Patents [OSTI]

    Mann, Nick R. (Blackfoot, ID); Tranter, Troy J. (Idaho Falls, ID); Todd, Terry A. (Aberdeen, ID); Sebesta, Ferdinand (Prague, CZ)

    2009-03-24

    An ion processing element employing composite media disposed in a porous substrate, for facilitating removal of selected chemical species from a fluid stream. The ion processing element includes a porous fibrous glass substrate impregnated by composite media having one or more active components supported by a matrix material of polyacrylonitrile. The active components are effective in removing, by various mechanisms, one or more constituents from a fluid stream passing through the ion processing element. Due to the porosity and large surface area of both the composite medium and the substrate in which it is disposed, a high degree of contact is achieved between the active component and the fluid stream being processed. Further, the porosity of the matrix material and the substrate facilitates use of the ion processing element in high volume applications where it is desired to effectively process a high volume flows.

  14. Manganese containing layer for magnetic recording media

    DOE Patents [OSTI]

    Lambeth, David N.; Lee, Li-Lien; Laughlin, David E.

    1999-01-01

    The present invention provides for a magnetic recording media incorporating Mn-containing layers between a substrate and a magnetic layer to provide media having increased coercivity and lower noise. The Mn-containing layer can be incorporated in a rotating, translating or stationary recording media to operate in conjunction with magnetic transducing heads for recording and reading of magnetic data, as well as other applications. The magnetic recording medium of the invention preferably includes a Co or Co alloy film magnetic layer, and Mn-containing layer, preferably comprised of VMn, TiMn, MnZn, CrMnMo, CrMnW, CrMnV, and CrMnTi, and most preferably a CrMn alloy, disposed between the substrate and the magnetic layer to promote an epitaxial crystalline structure in the magnetic layer. The medium can further include seed layers, preferably polycrystalline MgO for longitudinal media, underlayers, and intermediate layers. Underlayers and intermediate layers are comprised of materials having either an A2 structure or a B2-ordered crystalline structure disposed between the seed layer and the magnetic layer. Materials having an A2 structure are preferably Cr or Cr alloys, such as CrV, CrMo, CrW and CrTi. Materials having a B2-ordered structure having a lattice constant that is substantially comparable to that of Cr, such as those preferably selected from the group consisting of NiAl, AILCo, FeAl, FeTi, CoFe, CoTi, CoHf, CoZr, NiTi, CuBe, CuZn, A-LMn, AlRe, AgMg, and Al.sub.2 FeMn.sub.2, and is most preferably FeAl or NiAl.

  15. Foam Generation in Homogeneous Porous Media

    SciTech Connect (OSTI)

    Gauglitz, Phillip A.; Friedman, F.; Kam, S. I.; Rossen, W. R.

    2002-10-01

    In steady gas-liquid flow in homogeneous porous media with surfactant present, there is often observed a critical injection velocity or pressure gradient ?grad p min? at which ?weak? or ?coarse? foam is abruptly converted into ?strong foam,? with reduction of one to two orders of magnitude in total mobility: i.e., ?foam generation.? Earlier research on foam generation is extended here with extensive data for a variety of porous media, permeabilities, gases (N2 and C02), surfactants, and temperatures. For bead and sandpacks, ?grad p min? scales like (1/k), where k is permeability, over 2 1/2 orders of magnitude in k; for consolidated media the relation is more complex. For dense C02 foam, ?grad p min? exists but can be less than 1 psi/ft. If pressure drop, rather than flow rates, is fixed, one observes and unstable regime between stable ?strong? and ?coarse? foam regimes; in the unstable regime ?grad p? is nonuniform in space or variable in time.

  16. Inversion of normal moveout for monoclinic media

    SciTech Connect (OSTI)

    Grechka, V.; Contreras, P.; Tsvankin, I.

    2000-05-01

    Multiple vertical fracture sets, possibly combined with horizontal fine layering, produce an equivalent medium of monoclinic symmetry with a horizontal symmetry plane. Although monoclinic models may be rather common for fractured formations, they have hardly been used in seismic methods of fracture detection due to the large number of independent elements in the stiffness tensor. Here, the authors show that multicomponent wide-azimuth walkaway VSP surveys provide enough information to invert for all but one anisotropic parameters of monoclinic media. In order to facilitate the inversion procedure, the authors introduce a Thomsen-style parametrization for monoclinic media that includes the vertical velocities of the P-wave and one of the split S-waves and a set of dimensionless anisotropic coefficients. The parameter-estimation algorithm, based on NMO equations valid for any strength of the anisotropy, is designed to obtain anisotropic parameters of monoclinic media by inverting the vertical velocities and NMO ellipses of the P-, S{sub 1}- and S{sub 2}-waves. A Dix-type representation of the NMO velocity of mode-converted waves makes it possible to replace the pure shear modes in reflection surveys with the PS{sub 1}- and PS{sub 2}-waves. Numerical tests show that this method yields stable estimates of all relevant parameters for both a single layer and a horizontally stratified monoclinic medium.

  17. Method and apparatus for injecting particulate media into the ground

    DOE Patents [OSTI]

    Dwyer, Brian P.; Dwyer, Stephen F.; Vigil, Francine S.; Stewart, Willis E.

    2004-12-28

    An improved method and apparatus for injecting particulate media into the ground for constructing underground permeable reactive barriers, which are used for environmental remediation of subsurface contaminated soil and water. A media injector sub-assembly attached to a triple wall drill string pipe sprays a mixture of active particulate media suspended in a carrier fluid radially outwards from the sub-assembly, at the same time that a mixing fluid is sprayed radially outwards. The media spray intersects the mixing spray at a relatively close distance from the point of injection, which entrains the particulate media into the mixing spray and ensures a uniform and deep dispersion of the active media in the surrounding soil. The media injector sub-assembly can optionally include channels for supplying compressed air to an attached down-the-hole hammer drive assembly for use during drilling.

  18. WWW media distribution via Hopwise reliable multicast

    SciTech Connect (OSTI)

    Donnelley, J.E.

    1994-12-01

    Repeated access to WWW pages currently makes inefficient use of available network bandwidth. A Distribution Point Model is proposed where large and relatively static sets of pages (e.g. magazines or other such media) are distributed via bulk multicast to LAN distribution points for local access. Some access control issues are discussed. Hopwise Reliable Multicast (HRM) is proposed to simplify reliable multicast of non real time bulk data between LANs. HRM uses TCP for reliability and flow control on a hop by hop basis throughout a multicast distribution tree created by today`s Internet MBone.

  19. Exploration in the Sub Andean thrust/fold belt of northwest Argentina

    SciTech Connect (OSTI)

    Schulz, A.; Alarcon, M.; Aramayo, F.; Santiago, M.; Ashby, W.J.

    1996-08-01

    A significant portion of the 15,000 square kilometer Aguarague exploration permit is located with the Sub Andean zone of northwest Argentina bordering Bolivia. The Sub Andean sedimentary section is dominated by a succession of tectonostratigraphic cycles of Silurian to recent age. These cycles display a complex geological history prior to the onset of the Andean deformation of Upper Miocene age. As the structures are complex, several different exploration techniques were combined, including satellite imagery, aeromagnetics, geological mapping, geochemistry, microtectonic studies, magneto stratigraphy, seismic modeling and seismic with pre- and post-stack depth migration. The interpretation of these techniques produced three dimensional structural models, at regional and prospect scales, that demonstrated the deformation mechanism, sequence and timing of the structures; these were then linked to the timing of generation/expulsion of hydrocarbons. The physical properties of the sedimentary sequence produces three structural environs, each with distinct fold and fault mechanisms. 1. (Upper): A product of the cumulative deformation of the underlying environs; 2. (Middle): The presence of an incompetent shale, the principal source rock, within this unit produces {open_quotes}fold disharmony {close_quotes} (horizontally and vertically) between the overlying and underlying environs. 3. (Lower): Characterized by folds developed by Fault Bend Fold processes. Hydrocarbon fields and exploration prospects are present within all three environs. The work performed has permitted the successful evaluation of several structures within the Sub Andean of the UTE Aguarague.

  20. Communicating Hydrogen: Matching Message with Media | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Communicating Hydrogen: Matching Message with Media Communicating Hydrogen: Matching Message with Media This presentation by DOE's Christy Cooper was given at the State/Regional Hydrogen and Fuel Cell Initiatives Networking Meeting in March 2007. PDF icon h2_communications_media.pdf More Documents & Publications Documnet for Hydrogen State and Regional Workshop, March 30, 2008, Sacramento, CA Public Relations for Energy Sustainability EERE Program Management Guide - Chapter 3

  1. Equivalent Continuum Modeling for Shock Wave Propagation in Jointed Media

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Equivalent Continuum Modeling for Shock Wave Propagation in Jointed Media Citation Details In-Document Search Title: Equivalent Continuum Modeling for Shock Wave Propagation in Jointed Media This study presents discrete and continuum simulations of shock wave propagating through jointed media. The simulations were performed using the Lagrangian hydrocode GEODYN-L with joints treated explicitly using an advanced contact algorithm. They studied both

  2. Interactions between butterfly-shaped pulses in the inhomogeneous media

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect SciTech Connect Search Results Journal Article: Interactions between butterfly-shaped pulses in the inhomogeneous media Citation Details In-Document Search Title: Interactions between butterfly-shaped pulses in the inhomogeneous media Pulse interactions affect pulse qualities during the propagation. Interactions between butterfly-shaped pulses are investigated to improve pulse qualities in the inhomogeneous media. In order to describe the interactions

  3. News Media invited to interview Jefferson Lab summer science enrichment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    program participants; cover closing Poster Session | Jefferson Lab SULI 2004 participant Rachel Black, SULI 2004 participant, talks to Alan Gavalya (far left), Physics Division, and Jim Clark, Accelerator Division, about her work with JLab's Detector Group. Photo: Greg Adams, JLab Media Advisory: News Media invited to interview Jefferson Lab summer science enrichment program participants; cover closing Poster Session July 29, 2005 News Media representatives are invited to interview,

  4. A Research Park for Studying Processes in Unsaturated Fractured Media

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect A Research Park for Studying Processes in Unsaturated Fractured Media Citation Details In-Document Search Title: A Research Park for Studying Processes in Unsaturated Fractured Media A field research site has been developed to explore the combined use of physical experiments and mathematical modeling to analyze large-scale infiltration and chemical transport through the unsaturated media overlying the Snake River Plain Aquifer in southeastern Idaho. This

  5. Characterization of fluid distributions in porous media by NMR techniques

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Characterization of fluid distributions in porous media by NMR techniques Citation Details In-Document Search Title: Characterization of fluid distributions in porous media by NMR techniques The characterization of pore structures and fluid phase distributions in porous media is of fundamental importance for accurate evaluation of reservoir resources and petroleum recovery as well as for environmental remediation and many chemical engineering processes.

  6. Risk, media, and stigma at Rocky Flats

    SciTech Connect (OSTI)

    Flynn, J.; Peters, E.; Mertz, C.K.; Slovic, P.

    1998-12-01

    Public responses to nuclear technologies are often strongly negative. Events, such as accidents or evidence of unsafe conditions at nuclear facilities, receive extensive and dramatic coverage by the news media. These news stories affect public perceptions of nuclear risks and the geographic areas near nuclear facilities. One result of these perceptions, avoidance behavior, is a form of technological stigma that leads to losses in property values near nuclear facilities. The social amplification of risk is a conceptual framework that attempts to explain how stigma is created through media transmission of information about hazardous places and public perceptions and decisions. This paper examines stigma associated with the US Department of energy`s Rocky Flats facility, a major production plant in the nation`s nuclear weapons complex, located near Denver, Colorado. This study, based upon newspaper analyses and a survey of Denver area residents, finds that the social amplification theory provides a reasonable framework for understanding the events and public responses that took place in regard to Rocky Flats during a 6-year period, beginning with an FBI raid of the facility in 1989.

  7. Contact micromechanics in granular media with clay

    SciTech Connect (OSTI)

    Ita, S.L.

    1994-08-01

    Many granular materials, including sedimentary rocks and soils, contain clay particles in the pores, grain contacts, or matrix. The amount and location of the clays and fluids can influence the mechanical and hydraulic properties of the granular material. This research investigated the mechanical effects of clay at grain-to-grain contacts in the presence of different fluids. Laboratory seismic wave propagation tests were conducted at ultrasonic frequencies using spherical glass beads coated with Montmorillonite clay (SWy-1) onto which different fluids were adsorbed. For all bead samples, seismic velocity increased and attenuation decreased as the contact stiffnesses increased with increasing stress demonstrating that grain contacts control seismic transmission in poorly consolidated and unconsolidated granular material. Coating the beads with clay added stiffness and introduced viscosity to the mechanical contact properties that increased the velocity and attenuation of the propagating seismic wave. Clay-fluid interactions were studied by allowing the clay coating to absorb water, ethyl alcohol, and hexadecane. Increasing water amounts initially increased seismic attenuation due to clay swelling at the contacts. Attenuation decreased for higher water amounts where the clay exceeded the plastic limit and was forced from the contact areas into the surrounding open pore space during sample consolidation. This work investigates how clay located at grain contacts affects the micromechanical, particularly seismic, behavior of granular materials. The need for this work is shown by a review of the effects of clays on seismic wave propagation, laboratory measurements of attenuation in granular media, and proposed mechanisms for attenuation in granular media.

  8. Systems, Methods and Computer Readable Media for Modeling Cell...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Systems, Methods and Computer Readable Media for Modeling Cell Performance Fade, Kinetic ... CellSage also supports battery system development by characterizing cell and string ...

  9. MediaWiki:Pagedescription-view-mainpage | Open Energy Information

    Open Energy Info (EERE)

    Join our open community and help assemble the world's most comprehensive collection of digital energy resources. Retrieved from "http:en.openei.orgwindex.php?titleMediaWiki:Pa...

  10. An Acoustic Wave Equation for Tilted Transversely Isotropic Media...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: An Acoustic Wave Equation for Tilted Transversely Isotropic Media A finite-difference method for computing the first arrival traveltimes ...

  11. MediaWiki:Pagetitle-view-mainpage | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Energy Information and Data | OpenEI.org Retrieved from "http:en.openei.orgwindex.php?titleMediaWiki:Pagetitle-view-mainpage&oldid277068...

  12. High Co2 Emissions Through Porous Media- Transport Mechanisms...

    Open Energy Info (EERE)

    Co2 Emissions Through Porous Media- Transport Mechanisms And Implications For Flux Measurement And Fractionation Jump to: navigation, search OpenEI Reference LibraryAdd to library...

  13. Consumer Light Bulb Changes: Briefing and Resources for Media...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Light Bulb Changes: Briefing and Resources for Media and Retailers More Documents & Publications Interior Lighting Efficiency for Municipalities Lighting Tip Card Lighting Tip Card

  14. Energy Secretary Moniz to Hold Media Briefing on Energy Department's

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fiscal Year 2017 Budget Request | Department of Energy Hold Media Briefing on Energy Department's Fiscal Year 2017 Budget Request Energy Secretary Moniz to Hold Media Briefing on Energy Department's Fiscal Year 2017 Budget Request February 4, 2016 - 11:38am Addthis News Media Contact 202-586-4940 DOENews@hq.doe.gov WASHINGTON- On Tuesday, February 9, 2016, U.S. Department of Energy Secretary Ernest Moniz will hold a media briefing on DOE's Fiscal Year 2017 Budget Request, outlining DOE's

  15. Google Archives by Fiscal Year — Social Media Site

    Broader source: Energy.gov [DOE]

    From the EERE Web Statistics Archive: Corporate sites, retired Google Analytics profiles for the Social Media site for fiscal years 2012-14.

  16. Subtilisin variants suitable for hydrolysis and synthesis in organic media

    DOE Patents [OSTI]

    Arnold, Frances H.; Chen, Keqin

    1994-05-31

    In accordance with the present invention, there are provided novel, modified subtilisin enzyme(s) having improved catalytic activity and/or stability in organic media.

  17. News Media invited to interview JLab summer, science enrichment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JLab summer, science enrichment program participants; cover closing Poster Session 2003 ... News Media invited to interview JLab summer, science enrichment program participants; ...

  18. News Media invited to interview Jefferson Lab summer science...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media invited to interview Jefferson Lab summer science enrichment program ... of Jefferson Lab's summer, science enrichment programs as they share their summer ...

  19. News Media invited to interview Jefferson Lab summer science...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media invited to interview Jefferson Lab summer science enrichment program ... of Jefferson Lab's summer science enrichment programs as they share their summer ...

  20. Universal Serial Bus Architecture for Removable Media (USB-ARM)

    Energy Science and Technology Software Center (OSTI)

    2011-03-09

    USB-ARM creates operating system drivers which sit between removable media and the user and applications. The drivers isolate the media and submit the contents of the media to a virtual machine containing an entire scanning system. This scanning system may include traditional anti-virus, but also allows more detailed analysis of files, including dynamic run-time analysis, helping to prevent “zero-day” threats not already identified in anti-virus signatures. Once cleared, the media is presented to the operatingmore » system, at which point it becomes available to users and applications.« less

  1. Kinetics, Mechanics and Microstructure Changes in Storage Media

    Broader source: Energy.gov [DOE]

    Presentation on the Kinetics, Mechanics and Microstructure Changes in Storage Media given at the DOE Theory Focus Session on Hydrogen Storage Materials on May 18, 2006.

  2. Energy Secretary Moniz to Hold Media Briefing on Energy Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Secretary of Energy Ernest Moniz to Host Media Briefing on Energy Department's Fiscal Year 2016 Budget Request Energy Secretary Moniz, Senator Alexander, other Members of Congress ...

  3. PIA - ORO Web 2.0 Social Media Third-Party System (Facebook)...

    Energy Savers [EERE]

    ORO Web 2.0 Social Media Third-Party System (Facebook) PIA - ORO Web 2.0 Social Media Third-Party System (Facebook) PIA - ORO Web 2.0 Social Media Third-Party System (Facebook) PDF...

  4. Petroleum resources of South America: Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, and Peru. Foreign Energy Supply Assessment Program series

    SciTech Connect (OSTI)

    Dietzman, W.D.; Rafidi, N.R.

    1983-01-01

    This report is an analysis of discovered crude oil reserves, undiscovered recoverable crude oil resources, and estimated annual oil field production. The countries analyzed are Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, and Peru. All of the countries in this report have a history of petroleum exploration and development. Also, they maintain policies which support the search for, and exploitation of, petroleum resources. This systematic assessment provides estimates of the quantities of remaining known petroleum reserves and undiscovered recoverable resources. The future feasible production rates from the respective countries are also discussed. The FESAP assessments are limited to petroleum resources recoverable by conventional primary and secondary extraction technology. It is estimated that over 29.4 billion barrels of recoverable oil (both discovered and undiscovered) originally existed within the sedimentary basins of these countries, as follows: Argentina (9.4 billion barrels); Brazil (6.5 billion barrels); Colombia (5.0 billion barrels); Peru (3.6 billion barrels); Ecuador (over 3.0 billion barrels); Chile (1.1 billion barrels); and Bolivia (over 0.8 billion barrels). Through 1982, about 10.2 billion barrels of the oil had been produced. Thus, some 19.2 billion barrels constitute the remaining recoverable petroleum resource base. It is estimated that the most likely volume of crude oil remaining to be found in the seven countries is 12 billion barrels. 91 refs., 59 figs., 82 tabs.

  5. Foam Transport in Porous Media - A Review

    SciTech Connect (OSTI)

    Zhang, Z. F.; Freedman, Vicky L.; Zhong, Lirong

    2009-11-11

    Amendment solutions with or without surfactants have been used to remove contaminants from soil. However, it has drawbacks such that the amendment solution often mobilizes the plume, and its movement is controlled by gravity and preferential flow paths. Foam is an emulsion-like, two-phase system in which gas cells are dispersed in a liquid and separated by thin liquid films called lamellae. Potential advantages of using foams in sub-surface remediation include providing better control on the volume of fluids injected, uniformity of contact, and the ability to contain the migration of contaminant laden liquids. It is expected that foam can serve as a carrier of amendments for vadose zone remediation, e.g., at the Hanford Site. As part of the U.S. Department of Energy’s EM-20 program, a numerical simulation capability will be added to the Subsurface Transport Over Multiple Phases (STOMP) flow simulator. The primary purpose of this document is to review the modeling approaches of foam transport in porous media. However, as an aid to understanding the simulation approaches, some experiments under unsaturated conditions and the processes of foam transport are also reviewed. Foam may be formed when the surfactant concentration is above the critical micelle concentration. There are two main types of foams – the ball foam (microfoam) and the polyhedral foam. The characteristics of bulk foam are described by the properties such as foam quality, texture, stability, density, surface tension, disjoining pressure, etc. Foam has been used to flush contaminants such as metals, organics, and nonaqueous phase liquids from unsaturated soil. Ball foam, or colloidal gas aphrons, reportedly have been used for soil flushing in contaminated site remediation and was found to be more efficient than surfactant solutions on the basis of weight of contaminant removed per gram of surfactant. Experiments also indicate that the polyhedral foam can be used to enhance soil remediation. The transport of foam in porous media is complicated in that the number of lamellae present governs flow characteristics such as viscosity, relative permeability, fluid distribution, and interactions between fluids. Hence, foam is a non-Newtonian fluid. During transport, foam destruction and formation occur. The net result of the two processes determines the foam texture (i.e., bubble density). Some of the foam may be trapped during transport. According to the impacts of the aqueous and gas flow rates, foam flow generally has two regimes – weak and strong foam. There is also a minimum pressure gradient to initiate foam flow and a critical capillary for foam to be sustained. Similar to other fluids, the transport of foam is described by Darcy’s law with the exception that the foam viscosity is variable. Three major approaches to modeling foam transport in porous media are the empirical, semi-empirical, and mechanistic methods. Mechanistic approaches can be complete in principal but may be difficult to obtain reliable parameters, whereas empirical and semi-empirical approaches can be limited by the detail used to describe foam rheology and mobility. Mechanistic approaches include the bubble population-balance model, the network/percolation theory, the catastrophe theory, and the filtration theory. Among these methods, all were developed for modeling polyhedral foam with the exception that the method based on the filtration theory was for the ball foam (microfoam).

  6. Social Media and Messages That Matter: Top Tips and Tools Peer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media and Messages That Matter: Top Tips and Tools Peer Exchange Call Social Media and Messages That Matter: Top Tips and Tools Peer Exchange Call July 9...

  7. Advanced interferometric profile measurements through refractive media

    SciTech Connect (OSTI)

    Koev, Stephan T.; Ghodssi, Reza [MEMS Sensors and Actuators Laboratory (MSAL), Department of Electrical and Computer Engineering, Institute for Systems Research, University of Maryland, College Park, Maryland 20742 (United States)

    2008-09-15

    Optical profilers are valuable tools for the characterization of microelectromechanical systems (MEMSs). They use phase sifting interferometry (PSI) or vertical scanning interferometry to measure the topography of microscale structures with nanometer resolution. However, for many emerging MEMS applications, the sample needs to be imaged while placed in a liquid or in a package with a glass window. The increased refractive index of the transparent medium degrades the interference image contrast and prevents any measurement of the sample. We report on the modification of a Veeco NT1100 optical profiler to enable PSI measurements through refractive media. This approach can be applied to any other optical profiler with PSI capability. The modification consists in replacing the original illumination source with a custom-built narrow linewidth source, which increases the coherence length of the light and the contrast of the interference image. We present measurements taken with the modified configuration on samples covered with 3 mm water or 500 {mu}m glass, and we compare them to measurements of uncovered samples. We show that the measurement precision is only slightly reduced by the water and glass, and that it is still sufficiently high for typical MEMS applications. The described method can be readily used for measuring through other types and thicknesses of refractive materials.

  8. Direct assay of filter media following DEOX testing

    SciTech Connect (OSTI)

    Westphal, B.R.; Lind, R.P.; Giglio, J.J.; Cummings, D.G.; Huntley, M.W.; Morgan, C.D.; Bateman, K.J.; Wahlquist, D.L.; Sell, D.A.

    2007-07-01

    The direct assay of filter media by gamma spectrometry following DEOX testing has distinct advantages over analytical chemistry. Prior to using gamma spectrometry for the quantification of cesium (Cs- 137), a calibration must be established with known sources since gamma spectrometry yields relative results. Quantitative analytical chemistry, in particular ICP-MS, has been performed on the filter media for comparison to the gamma spectrometry data. The correlation of gamma spectrometry to ICP-MS data is presented to justify the continued use of gamma spectrometry for filter media. (authors)

  9. NREL: Sustainable NREL - Media Contacts for the Research Support Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Contacts for the Research Support Facility Please refer to these media contacts if you are a member of the media and have questions about the Research Support Facility (RSF). U.S. Department of Energy, Golden Field Office The U.S. Department of Energy (DOE), the owner of the National Renewable Energy Laboratory (NREL), developed the vision for a super energy-efficient office building on the NREL campus that would serve as a model and showcase for what is technologically possible and

  10. Quantum-dot based nanothermometry in optical plasmonic recording media

    SciTech Connect (OSTI)

    Maestro, Laura Martinez; Zhang, Qiming; Li, Xiangping; Gu, Min; Jaque, Daniel

    2014-11-03

    We report on the direct experimental determination of the temperature increment caused by laser irradiation in a optical recording media constituted by a polymeric film in which gold nanorods have been incorporated. The incorporation of CdSe quantum dots in the recording media allowed for single beam thermal reading of the on-focus temperature from a simple analysis of the two-photon excited fluorescence of quantum dots. Experimental results have been compared with numerical simulations revealing an excellent agreement and opening a promising avenue for further understanding and optimization of optical writing processes and media.

  11. Social Media and Social Reality - Theory, Evidence and Validation

    SciTech Connect (OSTI)

    Reynolds, William; Weber, Marta S.; Farber, Robert M.; Corley, Courtney D.; Cowell, Andrew J.; Gregory, Michelle L.

    2010-06-14

    Social Media provide an exciting and novel view into social phenomena. The vast amounts of data that can be gathered from the Internet coupled with massively parallel supercomputers such as the Cray XMT open new vistas for research. Conclusions drawn from such analysis must recognize that social media are distinct from the underlying social reality. Rigorous validation is essential. This paper briefly presents results obtained from computational analysis of social media - utilizing both blog and twitter data. Validation of these results is discussed in the context of a framework of established methodologies from the social sciences. Finally, an outline for a set of supporting studies is proposed.

  12. DOE Media Contact: Jim Giusti, (803) 952-7684

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Contact: Jim Giusti, (803) 952-7684, james-r.giusti@srs.gov EPA Media Contact: James Pinkney, (404) 562-9183, pinkney.james@epa.gov SCDHEC Media Contact: Jim Beasley, (803) 898-7769, beaslejc@dhec.sc.gov For Immediate Release Partial Agreement Reached On Savannah River Site Tank Closure Milestone Dispute AIKEN, S.C. February 12, 2015 - Today, the Department of Energy (DOE), Environmental Protection Agency - Region 4 (EPA-4), and South Carolina Department of Health and Environmental Control

  13. MEDIA BRIEFING CONFERENCE CALL: Secretary Chu to Host Solar Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Richard Swanson, President Emeritus of SunPower Corp., to host a media conference call ... WHO: Secretary of Energy Steven Chu Richard Swanson, President Emeritus, SunPower Corp. ...

  14. Fischer-Tropsch synthesis in supercritical reaction media

    SciTech Connect (OSTI)

    Subramaniam, B.

    1995-05-01

    The goal of the proposed research is to develop novel reactor operating strategies for the catalytic conversion of syngas to transportation grade fuels and oxygenates using near-critical (nc) fluids as reaction media. This will be achieved through systematic investigations aimed at a better fundamental understanding of the physical and chemical rate processes underlying catalytic syngas conversion in nc reaction media. Syngas conversion to fuels and fuel additives on Fe catalysts (Fischer-Tropsch synthesis) was investigated. Specific objectives are to investigate the effects of various nc media, their flow rates and operating pressure on syngas conversion, reactor temperature profiles, product selectivity and catalyst activity in trickle-bed reactors. Solvents that exhibit gas to liquid-like densities with relatively moderate pressure changes (from 25 to 60 bars) at typical syngas conversion temperatures (in the 220-280{degree}C range) will be chosen as reaction media.

  15. Apparatus and method for spectroscopic analysis of scattering media

    DOE Patents [OSTI]

    Strobl, Karlheinz; Bigio, Irving J.; Loree, Thomas R.

    1994-01-01

    Apparatus and method for spectroscopic analysis of scattering media. Subtle differences in materials have been found to be detectable from plots of intensity as a function of wavelength of collected emitted and scattered light versus wavelength of excitation light.

  16. Transcribed Media | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Home Transcribed Media SC Home About ASCR HEP SBIR & STTR WDTS Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: ...

  17. Social Media and Messages that Matter - Top Tips and Tools

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... strategy It should not replace all marketing efforts Provide value to your users ... social media site One of the largest digital ad platforms in existence with 1.3 ...

  18. Secretary Chu to Host Media Briefing on Energy Department FY...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WHEN: Monday, February 13, 2012 1:30 PM EST RSVP: Media wishing to attend or call into the briefing should contact Niketa Kumar at niketa.kumar@hq.doe.gov by 4:30 pm on Friday, ...

  19. Information for Media on Lighting Choices | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    and images are available for use by media organizations. The materials are copyright-free, and you are welcome to cite the U.S. Department of Energy Office of Energy...

  20. Method to manufacture bit patterned magnetic recording media

    DOE Patents [OSTI]

    Raeymaekers, Bart; Sinha, Dipen N

    2014-05-13

    A method to increase the storage density on magnetic recording media by physically separating the individual bits from each other with a non-magnetic medium (so-called bit patterned media). This allows the bits to be closely packed together without creating magnetic "cross-talk" between adjacent bits. In one embodiment, ferromagnetic particles are submerged in a resin solution, contained in a reservoir. The bottom of the reservoir is made of piezoelectric material.

  1. Ganglion dynamics of Supercritical CO2 in heterogeneous media. (Conference)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect Ganglion dynamics of Supercritical CO2 in heterogeneous media. Citation Details In-Document Search Title: Ganglion dynamics of Supercritical CO2 in heterogeneous media. Abstract not provided. Authors: Wang, Yifeng Publication Date: 2015-04-01 OSTI Identifier: 1247107 Report Number(s): SAND2015-2548C 579865 DOE Contract Number: AC04-94AL85000 Resource Type: Conference Resource Relation: Conference: Proposed for presentation at the CFSES Carbon Sequestration PI meetings held

  2. MEDIA BRIEFING CONFERENCE CALL: Secretary Chu to Host Solar Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conference Call | Department of Energy BRIEFING CONFERENCE CALL: Secretary Chu to Host Solar Energy Conference Call MEDIA BRIEFING CONFERENCE CALL: Secretary Chu to Host Solar Energy Conference Call February 4, 2011 - 12:00am Addthis WASHINGTON -TOMORROW, February 4, 2011, Secretary Steven Chu will join with Richard Swanson, President Emeritus of SunPower Corp., to host a media conference call to announce new funding for solar technology and manufacturing projects. Secretary Chu will also

  3. Spatiotemporal localized modes in PT-symmetric optical media (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Spatiotemporal localized modes in PT-symmetric optical media Citation Details In-Document Search Title: Spatiotemporal localized modes in PT-symmetric optical media We firstly obtain spatiotemporal localized mode solutions of a (3+1)-dimensional nonlinear Schrödinger equation in PT-symmetric potentials, and then discuss the linear stability of LMs, which are also tested by means of direct simulations. Moreover, phase switches and transverse power-flow density

  4. News Media invited to interview JLab summer, science enrichment program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    participants; cover closing Poster Session | Jefferson Lab JLab summer, science enrichment program participants; cover closing Poster Session 2003 Education Poster Session 2003 Education Poster Session News Media invited to interview JLab summer, science enrichment program participants; cover closing Poster Session July 28, 2004 Newport News, VA. - News Media representatives are invited to interview, photograph or film participants of Jefferson Lab's summer, science enrichment programs as

  5. News Media invited to interview Jefferson Lab summer science enrichment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    program participants; cover closing Poster Session | Jefferson Lab News Media invited to interview Jefferson Lab summer science enrichment program participants; cover closing Poster Session August 1, 2007 News Media representatives are invited to interview, photograph and/or film participants of Jefferson Lab's summer science enrichment programs as they share their summer experiences and projects with JLab staff during a Poster Session scheduled for Friday, Aug. 3, from 11:30 a.m.-1:30 p.m.

  6. Excited states in the active media of oxygen - iodine lasers

    SciTech Connect (OSTI)

    Azyazov, V N

    2009-11-30

    A review of investigations of kinetic processes in active media oxygen - iodine lasers (OILs) performed in the last decade is presented. The mechanisms of pumping and quenching of electronically and vibrationally excited O{sub 2} and I{sub 2} molecules are considered, and dissociation mechanisms of I{sub 2} in the active medium of the OIL are analysed. The values of kinetic constants of processes proceeding in the active media of OILs are recommended. (review)

  7. Designer synthetic media for studying microbial-catalyzed biofuel

    Office of Scientific and Technical Information (OSTI)

    production (Journal Article) | SciTech Connect Designer synthetic media for studying microbial-catalyzed biofuel production Citation Details In-Document Search Title: Designer synthetic media for studying microbial-catalyzed biofuel production Background: The fermentation inhibition of yeast or bacteria by lignocellulose-derived degradation products, during hexose/pentose co-fermentation, is a major bottleneck for cost-effective lignocellulosic biorefineries. To engineer microbial strains

  8. Review of enhanced vapor diffusion in porous media

    SciTech Connect (OSTI)

    Webb, S.W.; Ho, C.K.

    1998-08-01

    Vapor diffusion in porous media in the presence of its own liquid has often been treated similar to gas diffusion. The gas diffusion rate in porous media is much lower than in free space due to the presence of the porous medium and any liquid present. However, enhanced vapor diffusion has also been postulated such that the diffusion rate may approach free-space values. Existing data and models for enhanced vapor diffusion, including those in TOUGH2, are reviewed in this paper.

  9. Media Advisory -- Director of National Science Foundation to Visit Colorado

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Advisory -- Director of National Science Foundation to Visit Colorado For more information contact: Contact: Kerry Masson, NREL 275-4083 David Grimm, CU 492-6206 Tom Milligan, CSU 970-491-6432 Golden, Colo., Feb. 28, 1997 -- Media are invited to cover the visit of Dr. Neal Lane, Director of the National Science Foundation, to Colorado March 6 - 7. Dr. Lane will meet with leaders of the scientific community, business and industry and the state government to discuss federal support for

  10. Sr. Media Support Specialist | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Support Specialist Department: Information Technology Staff: TSS 03 Requisition Number: 1600369 Position Summary: The Princeton University Plasma Physics Laboratory (PPPL), is a world-renowned fusion energy research center under contract with the U. S. Department of Energy. Princeton University's Plasma Physics Laboratory has an opening within its Information Technology Department for a Senior Media Support Specialist. This person will be responsible for planning and coordinating the

  11. Media Advisory: White House to host Water Summit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Advisory: White House to host Water Summit Media Advisory: White House to host Water Summit The summit will raise awareness of the national importance of water and highlight new commitments and announcements that the Administration and non-Federal institutions are making to build a sustainable water future. March 21, 2016 On Tuesday, March 22, 2016-World Water Day-the Administration will host a White House Water Summit to raise awareness of the national importance of water. On Tuesday,

  12. Media invited to join students in crystallography experiment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media invited to join students in crystallography experiment Media invited to join students in crystallography experiment The student outreach effort is part of the events commemorating 2014 as the International Year of Crystallography. May 16, 2014 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and

  13. Using Social Media to Engage the Community in Energy Efficiency Projects

    Broader source: Energy.gov [DOE]

    This webinar covered best practices of using social media to engage communities to energy efficiency projects.

  14. Convenient formulations for immiscible displacement in porous media

    SciTech Connect (OSTI)

    Civan, F.

    1996-12-31

    Convenient formulations of the immiscible displacement in porous media are presented and applied for waterflooding. The macroscopic equation of continuity for immiscible displacement is derived by porous media averaging. Richardson`s approach and the fractional flow formulation are extended and generalized for anisotropic and heterogeneous porous media. The integral transformations according to Douglas et al and the coordinate transformations presented in this paper lead to differential equations which do not involve the variable fluid and porous media properties explicitly in the differential operators. Fractional flow and unit end-point mobility ratio formulations are also derived for specific applications to reduce the computational requirements and accomplish rapid simulation of waterflooding of petroleum reservoirs. It is demonstrated by typical examples that the resulting equations can be discretized and solved more conveniently and accurately than the conventional formulation which require cumbersome discretization formulae for mixed derivatives involving the fluid and porous media properties. Therefore, the convenient formulations offer potential advantages over the usual formulation used in the simulation of waterflooding such as improved accuracy and reduced computational effort.

  15. Nevada Site Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media Contact: For Immediate Release: 702-295-1854 (media) January 29, 2013 702-295-1772 (public) 7:52:47 PM INCIDENT AT THE NEVADA NATIONAL SECURITY SITE North Las Vegas - At approximately 4 pm today, a suspicious item was identified outside the security perimeter of the Device Assembly Facility in the central portion of the Nevada National Security Site. * It is a non-threatening item, and there is no safety or security risk at the site. * All employees have been accounted for, and there

  16. Composite media for fluid stream processing, a method of forming the composite media, and a related method of processing a fluid stream

    DOE Patents [OSTI]

    Garn, Troy G; Law, Jack D; Greenhalgh, Mitchell R; Tranter, Rhonda

    2014-04-01

    A composite media including at least one crystalline aluminosilicate material in polyacrylonitrile. A method of forming a composite media is also disclosed. The method comprises dissolving polyacrylonitrile in an organic solvent to form a matrix solution. At least one crystalline aluminosilicate material is combined with the matrix solution to form a composite media solution. The organic solvent present in the composite media solution is diluted. The composite media solution is solidified. In addition, a method of processing a fluid stream is disclosed. The method comprises providing a beads of a composite media comprising at least one crystalline aluminosilicate material dispersed in a polyacrylonitrile matrix. The beads of the composite media are contacted with a fluid stream comprising at least one constituent. The at least one constituent is substantially removed from the fluid stream.

  17. Two-photon bound state in self-focusing media

    SciTech Connect (OSTI)

    Chiao, R.Y.; Deutsch, I.H. ); Garrison, J.C. )

    1991-09-09

    We derive a two-photon bound-state solution to the problem of quantum propagation of light in Kerr-effect nonlinear media which classically would exhibit self-focusing and self-trapping. We propose an experiment to see this two-photon bound state.

  18. Web-Based Visual Analytics for Social Media

    SciTech Connect (OSTI)

    Best, Daniel M.; Bruce, Joseph R.; Dowson, Scott T.; Love, Oriana J.; McGrath, Liam R.

    2012-05-20

    Social media provides a rich source of data that reflects current trends and public opinion on a multitude of topics. The data can be harvested from Twitter, Facebook, Blogs, and other social applications. The high rate of adoption of social media has created a domain that has an ever expanding volume of data that make it difficult to use the raw data for analysis. Information visual analytics is key in drawing out features of interest in social media. The Scalable Reasoning System is an application that couples a back end server performing analysis algorithms and an intuitive front end visualization to allow for investigation. We provide a componentized system that can be rapidly adapted to customer needs such that the information they are most interested in is brought to their attention through the application. To this end, we have developed a social media application for use by emergency operations for the city of Seattle to show current weather and traffic trends which is important for their tasks.

  19. Social media offers many ways to grow business

    SciTech Connect (OSTI)

    Madison, Alison L.

    2011-03-13

    Facebook and Twitter and YouTube, oh my! For some of us the added communications channels offered by social media can feel overwhelming in a hurry. But whether we like it or not, theyre proving to be valuable marketing tools that small and large companies alike are jumping on board to explore.

  20. Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (301) | Department of Energy Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301) Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301) June

  1. Gas-phase diffusion in porous media: Comparison of models (Conference...

    Office of Scientific and Technical Information (OSTI)

    Another approach for gas-phase transport in porous media is the Dusty-Gas Model. This model applies the kinetic theory of gases to the gaseous components and the porous media (or ...

  2. Repetitive Regeneration of Media #1 in a Dynamic Column Extraction using Brine #1

    SciTech Connect (OSTI)

    Gary Garland

    2015-10-14

    This data is from a regeneration study from a dynamic column extraction experiment where we ran a solution of REE's through a column of media #1 then stripped the REE's off the media using 2M HNO3 solution. We then re-equilibrated the media and repeated the process of running a REE solution through the column and stripping the REE's off the media and comparing the two runs.

  3. Using Social Media for Long-Term Branding | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media for Long-Term Branding Using Social Media for Long-Term Branding Better Buildings Residential Network Marketing and Outreach Peer Exchange Call Series: Using Social Media for Long-Term Branding, Call Slides and Discussion Summary, February 27, 2014. PDF icon Call Slides and Discussion Summary More Documents & Publications Effective Strategies for Participating in Utility Planning Marketing & Driving Demand Collaborative - Social Media Tools & Strategies Leveraging

  4. PIA - ORO Web 2.0 Social Media Third-Party System (Facebook) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy ORO Web 2.0 Social Media Third-Party System (Facebook) PIA - ORO Web 2.0 Social Media Third-Party System (Facebook) PIA - ORO Web 2.0 Social Media Third-Party System (Facebook) PDF icon PIA - ORO Web 2.0 Social Media Third-Party System (Facebook) More Documents & Publications PIA - Bonneville Power Adminstration Ethics Helpline PIA - WEB Physical Security Major Application PIA - Security Clearance Work Tracking and Budget System

  5. http://www.doe.gov/media/Myths_and_Facts.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    doe.gov/media/Myths_and_Facts.pdf http://www.doe.gov/media/Myths_and_Facts.pdf PDF icon http://www.doe.gov/media/Myths_and_Facts.pdf More Documents & Publications Biofuels & Greenhouse Gas Emissions: Myths versus Facts Microsoft Word - 47C468D4-69BA-281F40.doc Biofuels & Greenhouse Gas Emissions: Myths versus Facts

  6. REE Sorption Study for Media #1 and Media #2 in Brine #1 and #2 at different Liquid to Solid Ratio's at Ambient Temperature

    SciTech Connect (OSTI)

    Gary Garland

    2015-03-27

    This data set shows the different loading capacities of Media #1 and Media #2 in a high and low salt content brine matrix at different liquid to solid ratio's. These data sets are shaker bath tests on media #1 and media #2 in brine's #1 and #2 at 500mL-.5g(1000-1 ratio), 150mL-.75g(200-1 ratio), and 150mL-2.5g(60-1 ratio) at ambient temperature.

  7. Performance evaluation of two emerging media processors: VIRAM and imagine

    SciTech Connect (OSTI)

    Oliker, Leonid; Duell, Jason; Narayanan, Manikandan; Chatterji, Sourav

    2003-01-01

    This work presents two emerging media microprocessors, VIRAM and Imagine, and compares the implementation strategies and performance results of these unique architectures. VIRAM is a complete system on a chip which uses PIM technology to combine vector processing with embedded DRAM. Imagine is a programmable streaming architecture with a specialized memory hierarchy designed for computationally intensive data-parallel codes. First, we present a simple and effective approach for understanding and optimizing vector/stream applications. Performance results are then presented from a number of multimedia benchmarks and a computationally intensive scientific kernel. We explore the complex interact ions between programming paradigms, the architectural support at the ISA lever and the underlying microarchitecture of these two systems. Our long term goal is to evaluate leading media microprocessors as possible building blocks for future high performance systems.

  8. Joint DOE-MSA News Release Media Contacts:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 19, 2015 Joint DOE-MSA News Release Media Contacts: Cameron Hardy, DOE, (509) 376-5365, Cameron.Hardy@rl.doe.gov Rae Weil, Mission Support Alliance, (509) 376-6522, Rae_S_Weil@rl.gov DOE-NNSA, Washington to take part in regional exercise in Benton and Franklin Counties Training designed to enable responders to work together effectively during radiological emergencies Richland, Wash. - The U.S. Department of Energy's (DOE) National Nuclear Security Administration's (NNSA) Radiological

  9. Carbon fiber composite molecular sieve electrically regenerable air filter media

    DOE Patents [OSTI]

    Wilson, Kirk A.; Burchell, Timothy D.; Judkins, Roddie R.

    1998-01-01

    An electrically regenerable gas filter system includes a carbon fiber composite molecular sieve (CFCMS) filter medium. After a separate medium-efficiency pre-filter removes particulate from the supply airstream, the CFCMS filter sorbs gaseous air pollutants before the air is recirculated to the space. When saturated, the CFCMS media is regenerated utilizing a low-voltage current that is caused to pass through the filter medium.

  10. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 March 11, 2013 Darwin.Morgan@nnsa.doe.gov Las Vegas Valley Aerial Radiation Background Survey LAS VEGAS, NV - Starting in March 2013, a helicopter may be seen flying at low altitudes over portions of the Las Vegas Valley. The purpose of the flyovers is to measure naturally occurring background radiation. The flyovers are a part of a research project sponsored by the Department of Homeland Security's Domestic Nuclear

  11. Nevada Site Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    21, 2012 morgan@nv.doe.gov MEDIA ADVISORY An important step was taken today directed toward protecting desert tortoises at the Nevada National Security Site (formerly the Nevada Test Site). Sixty juvenile desert tortoises were released in an undisturbed area on the southern end of the Site. The animals came from the Desert Tortoise Conservation Center (DTCC) in Las Vegas. The DTCC is managed by the San Diego Zoo for conservation research for the United States Fish and Wildlife Service (USFWS).

  12. Nevada Site Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Site Office News News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 August 11, 2011 morgan@nv.doe.gov Kelly K. Snyder, 702-295-3521 snyderk@nv.doe.gov NNSA DEFENSE PROGRAMS ANNOUNCES QUARTERLY AWARDS LAS VEGAS, NV - The National Nuclear Security Administration (NNSA) has announced that Richard Fischer and Roger Thompson, both employees of the Nevada National Security Site (NNSS), are recipients of the Defense Programs' Employee of the Quarter Awards. Recipients of

  13. Nevada Site Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 June 7, 2012 morgan@nv.doe.gov Security System Services Contract Awarded at NNSS The National Nuclear Security Administration (NNSA) has awarded a small-business contract for security support services at the Nevada National Security Site (NNSS). Professional Project Services Inc. (Pro2Serve), of Oak Ridge, TN, was awarded the five year contract. The contract is effective July 1, 2012. The contract includes a three-year

  14. Designer synthetic media for studying microbial-catalyzed biofuel production

    Office of Scientific and Technical Information (OSTI)

    Open Access Designer synthetic media for studying microbial- catalyzed biofuel production Xiaoyu Tang 1* , Leonardo da Costa Sousa 2 , Mingjie Jin 2 , Shishir PS Chundawat 2,3 , Charles Kevin Chambliss 4 , Ming W Lau 2 , Zeyi Xiao 5 , Bruce E Dale 2 and Venkatesh Balan 2* Abstract Background: The fermentation inhibition of yeast or bacteria by lignocellulose-derived degradation products, during hexose/pentose co-fermentation, is a major bottleneck for cost-effective lignocellulosic

  15. Media Advisory - Virginia Regional High School Science Bowl | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High School Science Bowl Media Advisory - Virginia Regional High School Science Bowl What: Virginia Regional High School Science Bowl When: Saturday, Feb. 1, 2014. Round robin competition runs from 9 a.m. - noon. The double elimination, semi-final and finalist rounds run from 1:30 - ~ 5 p.m. Awards presentations will be made immediately after the final round. Where: CEBAF Center Auditorium, Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, Va. 23606 Details:

  16. Media Advisory - Virginia Regional Middle School Science Bowl | Jefferson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab Middle School Science Bowl Media Advisory - Virginia Regional Middle School Science Bowl What: Virginia Regional Middle School Science Bowl When: Saturday, March 1, 2014. Round robin competition runs from 9 a.m. - noon. The double elimination, semi-final and finalist rounds run from 1:30 - ~ 4 p.m. Awards presentations will be made immediately after the final round. Where: CEBAF Center Auditorium, Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, Va.

  17. Media Advisory: Jefferson Lab Signs Partnership Agreement With Virginia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    STEAM Academy | Jefferson Lab Advisory: Jefferson Lab Signs Partnership Agreement With Virginia STEAM Academy Media Advisory: Jefferson Lab Signs Partnership Agreement With Virginia STEAM Academy Date: Monday, Nov. 26, 2012 Time: The signing will take place at 2:30 p.m. Place: CEBAF Center at Jefferson Lab, 12000 Jefferson Avenue, Newport News, VA 23606 Event: Jefferson Science Associates/Jefferson Lab will sign a Memorandum of Understanding (MOU) with the Virginia Science Technology

  18. Media Advisory: March 1 Middle School Science Bowl Tournament | Jefferson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab 1 Middle School Science Bowl Tournament Media Advisory What: Virginia Regional Middle School Science Bowl When: Saturday, March 1, 2008. Round robin competition runs from 10 a.m. - noon. The double elimination, semi-final and finalist rounds run from 1:30 - 5 p.m. Awards presentations will be made immediately after the final round. Where: CEBAF Center Auditorium, Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, VA Details: Twenty teams, representing

  19. Nowcasting influenza outbreaks using open-source media report.

    SciTech Connect (OSTI)

    Ray, Jaideep; Brownstein, John S.

    2013-02-01

    We construct and verify a statistical method to nowcast influenza activity from a time-series of the frequency of reports concerning influenza related topics. Such reports are published electronically by both public health organizations as well as newspapers/media sources, and thus can be harvested easily via web crawlers. Since media reports are timely, whereas reports from public health organization are delayed by at least two weeks, using timely, open-source data to compensate for the lag in %E2%80%9Cofficial%E2%80%9D reports can be useful. We use morbidity data from networks of sentinel physicians (both the Center of Disease Control's ILINet and France's Sentinelles network) as the gold standard of influenza-like illness (ILI) activity. The time-series of media reports is obtained from HealthMap (http://healthmap.org). We find that the time-series of media reports shows some correlation ( 0.5) with ILI activity; further, this can be leveraged into an autoregressive moving average model with exogenous inputs (ARMAX model) to nowcast ILI activity. We find that the ARMAX models have more predictive skill compared to autoregressive (AR) models fitted to ILI data i.e., it is possible to exploit the information content in the open-source data. We also find that when the open-source data are non-informative, the ARMAX models reproduce the performance of AR models. The statistical models are tested on data from the 2009 swine-flu outbreak as well as the mild 2011-2012 influenza season in the U.S.A.

  20. Carbon fiber composite molecular sieve electrically regenerable air filter media

    DOE Patents [OSTI]

    Wilson, K.A.; Burchell, T.D.; Judkins, R.R.

    1998-10-27

    An electrically regenerable gas filter system includes a carbon fiber composite molecular sieve (CFCMS) filter medium. After a separate medium-efficiency pre-filter removes particulate from the supply air stream, the CFCMS filter sorbs gaseous air pollutants before the air is recirculated to the space. When saturated, the CFCMS media is regenerated utilizing a low-voltage current that is caused to pass through the filter medium. 3 figs.

  1. Development of Model Filtration Media for Investigating Size-Dependent

    Broader source: Energy.gov (indexed) [DOE]

    Filtration Efficiency | Department of Energy A novel method for fabricating custom porous filtration media for emission control has been developed. Controlled pore sizes could be used to optimize high-capture efficiency with low backpressure. PDF icon p-25_strzelec.pdf More Documents & Publications Fuel-Neutral Studies of Particulate Matter Transport Emissions Fuel-Neutral Studies of Particulate Matter Transport Emissions Diesel Particulate Oxidation Model: Combined Effects of Fixed

  2. Hydraulic properties of adsorbed water films in unsaturated porous media

    SciTech Connect (OSTI)

    Tokunaga, Tetsu K.

    2009-03-01

    Adsorbed water films strongly influence residual water saturations and hydraulic conductivities in porous media at low saturations. Hydraulic properties of adsorbed water films in unsaturated porous media were investigated through combining Langmuir's film model with scaling analysis, without use of any adjustable parameters. Diffuse double layer influences are predicted to be important through the strong dependence of adsorbed water film thickness (f) on matric potential ({Psi}) and ion charge (z). Film thickness, film velocity, and unsaturated hydraulic conductivity are predicted to vary with z{sup -1}, z{sup -2}, and z{sup -3}, respectively. In monodisperse granular media, the characteristic grain size ({lambda}) controls film hydraulics through {lambda}{sup -1} scaling of (1) the perimeter length per unit cross sectional area over which films occur, (2) the critical matric potential ({Psi}{sub c}) below which films control flow, and (3) the magnitude of the unsaturated hydraulic conductivity when {Psi} < {Psi}{sub c}. While it is recognized that finer textured sediments have higher unsaturated hydraulic conductivities than coarser sands at intermediate {Psi}, the {lambda}{sup -1} scaling of hydraulic conductivity predicted here extends this understanding to very low saturations where all pores are drained. Extremely low unsaturated hydraulic conductivities are predicted under adsorbed film-controlled conditions (generally < 0.1 mm y{sup -1}). On flat surfaces, the film hydraulic diffusivity is shown to be constant (invariant with respect to {Psi}).

  3. Treatment studies of paint stripping waste from plastic media blasting

    SciTech Connect (OSTI)

    Spence, R.D.

    1995-12-31

    Blasting with plastic media is used to strip paint and decontaminate surfaces. For disposal the plastic media is pulverized into a plastic dust. About 10 wt % of the waste from plastic media blasting is pulverized paint, which makes the waste a characteristically hazardous waste because of the presence of barium, cadmium, chromium and lead in the paint pigments. Four separate treatments of this hazardous waste were studied: (1) density separation to remove the paint, (2) self-encapsulation of the mix of plastic and paint dust into plastic pellets, (3) solidification/stabilization (S/S) into cementitious waste forms, and (4) low-temperature ashing to destroy the large mass of nonhazardous polymer. Two types of plast blasting wastes were studied: a urea formaldehyde thermoset polymer and an acrylic thermoplastic polymer (polymethylmethacrylate). Toxicity Characteristic Leach Procedure (TCLP) extraction concentrations for the treated and untreated wastes are listed. Density separation failed to adequately separate the paint with an aqueous carbonate solution. Self-encapsulation reduced the waste volume by about 50%, but did not meet TCLP criteria. Cementitious solidification gave the lowest TCLP concentrations, but increased the waste volume by about 50%. Low-temperature ashing at 600 C resulted in a mass decrease of 93 to 98% for the wastes; the metals remaining in the ash could be stabilized with cementitious solidification and still result in a volume decrease of 75 to 95 volume percent.

  4. Computer media security considerations: DOE Order 5635. 1A and DOE Order 5637. 1

    SciTech Connect (OSTI)

    Clever, J.J.

    1988-01-01

    This paper suggests that the examples for marking computer and word processing media and the written specifications for marking word processing media, contained in Chapter III, DOE Order 5635.1A, are technically incorrect. SNLA study indicates that strict compliance can lead to damage to the computer media drive and/or media itself. A model for technically appropriate marking is recommended which would facilitate longer distance visual identification of sensitive media, allow proper human readable identification of the classification levels, categories, special access/handling, and accountability/control data as applicable to the specific media. A diskette labeling example is provided which will meet the model requirements and which will not adversely act to cause damage to either the computer drive or the media. 5 refs., 15 figs.

  5. Influence of thermal conditioning media on Charpy specimen test temperature

    SciTech Connect (OSTI)

    Nanstad, R.K.; Swain, R.L.; Berggren, R.G.

    1989-01-01

    The Charpy V-notch (CVN) impact test is used extensively for determining the toughness of structural materials. Research programs in many technologies concerned with structural integrity perform such testing to obtain Charpy energy vs temperature curves. American Society for Testing and Materials Method E 23 includes rather strict requirements regarding determination and control of specimen test temperature. It specifies minimum soaking times dependent on the use of liquids or gases as the medium for thermally conditioning the specimen. The method also requires that impact of the specimen occur within 5 s removal from the conditioning medium. It does not, however, provide guidance regarding choice of conditioning media. This investigation was primarily conducted to investigate the changes in specimen temperature which occur when water is used for thermal conditioning. A standard CVN impact specimen of low-alloy steel was instrumented with surface-mounted and embedded thermocouples. Dependent on the media used, the specimen was heated or cooled to selected temperatures in the range {minus}100 to 100{degree}C using cold nitrogen gas, heated air, acetone and dry ice, methanol and dry ice, heated oil, or heated water. After temperature stabilization, the specimen was removed from the conditioning medium while the temperatures were recorded four times per second from all thermocouples using a data acquisition system and a computer. The results show that evaporative cooling causes significant changes in the specimen temperatures when water is used for conditioning. Conditioning in the other media did not result in such significant changes. The results demonstrate that, even within the guidelines of E 23, significant test temperature changes can occur which may substantially affect the Charpy impact test results if water is used for temperature conditioning. 7 refs., 11 figs.

  6. Fukushima Media Involvement: Lessons Learned and Challenges - 13261

    SciTech Connect (OSTI)

    Harvey, Geoffrey L.; Johnson, Wayne L.; Koller, Greg L.

    2013-07-01

    Only days after the Fukushima nuclear reactor disaster on March 11, 2011, the DOE's Pacific Northwest National Laboratory, or PNNL, found itself in a maelstrom of media attention following its announcement of the detection of minute levels of radioactive material originating from the damaged reactors 4,500 miles away. Because PNNL develops state-of-the-art ultra-sensitive radionuclide detection and monitoring systems for national security applications, and has some of the equipment operating on its Richland campus, there was little surprise when one of these sophisticated systems led PNNL to be the first to detect measurable radionuclides in the United States. On Wednesday, March 16, 2011, that system detected minuscule levels of short-lived radioactive xenon, a telltale element derived from either weapons testing or a major reactor disruption. Immediately after the detection was announced, a flurry of inquiries nearly overwhelmed staff as governments, scientific organizations, the general public, and reporters struggled to understand and estimate what impacts this disaster might have on health and environment. Over the course of about three weeks, PNNL's News and Media Relations staff and its scientists and engineers responded to more than 100 requests for information, and engaged in dozens of personal interviews with international, national, regional, and local media. While many of the interviews and resulting stories were accurate and well done, not all communication went flawlessly. In the midst of chaos and confusion, which are part of any significant crisis, hiccoughs are sure to occur. Addressed here is 'the rest of the story'. (authors)

  7. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Field Office News News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 October 8, 2015 Darwin.Morgan@nnsa.doe.gov Kelly K. Snyder, 702-295-3521 Kelly.Snyder@nnsa.doe.gov Annual Environmental Monitoring Report Released The Nevada National Security Site (NNSS) Environmental Report for 2014 has been released and is available on-line at www.nv.energy.gov/library/publications/aser.aspx. This document is a collection of results from environmental activities, such as air

  8. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Field Office News News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 February 8, 2016 darwin.morgan@nnsa.doe.gov Kelly K. Snyder, 702-295-2836 kelly.snyder@nnsa.doe.gov DAVIDSON ACADEMY OF NEVADA WINS 2016 NEVADA SCIENCE BOWL Dozens of high schools compete for Nevada Science Bowl title Davidson Academy of Nevada roared to victory on Saturday in the 2016 Nevada Science Bowl. 32 teams started the day squaring off in the 25th Annual Nevada Science Bowl. Davidson

  9. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Field Office News News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 February 4, 2016 darwin.morgan@nnsa.doe.gov Kelly K. Snyder, 702-295-2836 kelly.snyder@nnsa.doe.gov NEVADA SCIENCE BOWL TO CROWN CHAMPION THIS SATURDAY Thirty High Schools compete in Nevada's prestigious academic tournament Some say the big bowl game is this Sunday. 160 high school students believe the real bowl game is this Saturday! The Nevada Science Bowl. Teams from 30 high schools will

  10. Renormalized anisotropic exchange for representing heat assisted magnetic recording media

    SciTech Connect (OSTI)

    Jiao, Yipeng; Liu, Zengyuan; Victora, R. H.

    2015-05-07

    Anisotropic exchange has been incorporated in a description of magnetic recording media near the Curie temperature, as would be found during heat assisted magnetic recording. The new parameters were found using a cost function that minimized the difference between atomistic properties and those of renormalized spin blocks. Interestingly, the anisotropic exchange description at 1.5 nm discretization yields very similar switching and magnetization behavior to that found at 1.2 nm (and below) discretization for the previous isotropic exchange. This suggests that the increased accuracy of anisotropic exchange may also reduce the computational cost during simulation.

  11. Joint DOE-MSA News Release Media Contacts:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 22, 2014 Joint DOE-MSA News Release Media Contacts: Cameron Hardy, DOE, (509) 376-5365, Cameron.Hardy@rl.doe.gov Rae Weil, Mission Support Alliance, (509) 376-6522, Rae_S_Weil@rl.gov Workers Enter Cocooned F Reactor for Scheduled Inspection Inspection by DOE ensures reactors are safe, secure RICHLAND, Wash. - Workers from Mission Support Alliance, LLC., removed the welds around the steel door of the F Reactor last week before stepping inside the reactor to complete its periodic

  12. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 December 4, 2013 Darwin.Morgan@nnsa.doe.gov Kelly K. Snyder, 702-295-3521 Kelly.Snyder@nnsa.doe.gov Annual Groundwater Open House to be Held in Beatty, NV On Wednesday, December 11, 2013, the U.S. Department of Energy, National Nuclear Security Administration's Nevada Field Office will hold its 5th annual Groundwater Open House in Beatty, Nevada. Federal, State, and County representatives will be on hand at the event,

  13. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Field Office News News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 February 27, 2014 Darwin.Morgan@nnsa.doe.gov Kelly K. Snyder, 702-295-3521 Kelly.Snyder@nnsa.doe.gov Nevada Middle School Students Ready for Nevada Science Bowl 100+ middle school students will test their knowledge this Saturday More than 100 middle school students from all over the Las Vegas Valley will gather this Saturday to represent their schools at the annual Nevada Science Bowl. The

  14. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Field Office News News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 April 12, 2013 Darwin.Morgan@nnsa.doe.gov Kelly K. Snyder, 702-295-3521 kelly.snyder@nnsa.doe.gov U.S. Department of Energy Advisory Board to Meet A public meeting hosted by the Nevada Site Specific Advisory Board (NSSAB) will begin at 5:00 p.m., Wednesday, April 17, 2013, at 755 E. Flamingo Rd, in Las Vegas, Nevada. Planned meeting topics include groundwater and surface contamination clean-up.

  15. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 November 18, 2013 Darwin.Morgan@nnsa.doe.gov Kelly K. Snyder, 702-295-3521 Kelly.Snyder@nnsa.doe.gov U.S. Department of Energy (DOE) Advisory Board to Meet A public meeting hosted by the Nevada Site Specific Advisory Board (NSSAB) will begin at 5 p.m., Wednesday, November 20, 2013, at the National Atomic Testing Museum, 755 East Flamingo Road, Las Vegas, Nevada. Planned meeting topics include an upcoming independent peer

  16. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Field Office News News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 March 13, 2014 darwin.morgan@nnsa.doe.gov Kelly K. Snyder, 702-295-3521 kelly.snyder@nnsa.doe.gov U.S. Department of Energy (DOE) Advisory Board to Meet A public meeting hosted by the Nevada Site Specific Advisory Board (NSSAB) will begin at 5 p.m., Wednesday, March 19, 2014, at the National Atomic Testing Museum, 755 East Flamingo Road, Las Vegas, Nevada. Planned meeting topics include a briefing and

  17. Nevada Site Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 September 29, 2011 morgan@nv.doe.gov Kelly K. Snyder, 702-295-3521 snyderk@nv.doe.gov Department of Energy Extends Public Comment Period In response to public comments and requests, the U.S. Department of Energy National Nuclear Security Administration Nevada Site Office is extending the public comment period for the Draft Site-Wide Environmental Impact Statement (SWEIS) for the Nevada National Security Site (NNSS) and

  18. Nevada Site Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 May 23, 2012 morgan@nv.doe.gov Dante Pistone, 702-295-6021 pistondc@nv.doe.gov World's Record Tower Demolition Set in Southern Nevada LAS VEGAS, NEVADA - A world's record was set today at the Nevada National Security Site (NNSS), when a 1,527-foot steel tower used in above-ground nuclear experiments in the 1960s was brought down in a planned demolition. The Bare Reactor Experiment -- Nevada (BREN) Tower was the tallest

  19. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Field Office News News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 May 12, 2016 darwin.morgan@nnsa.doe.gov Kelly Snyder, 702-295-2836 kelly.snyder@nnsa.doe.gov U.S. Department of Energy (DOE) Advisory Board to Meet A public meeting hosted by the Nevada Site Specific Advisory Board (NSSAB) will begin at 5 p.m., Wednesday, May 18, 2016, at the Frank H. Rogers Science and Technology Building, 755 East Flamingo Road, Las Vegas, Nevada. Planned meeting topics include a

  20. Nevada Field Office News News Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Field Office News News Media Contact: For Immediate Release: Darwin J. Morgan, 702-295-3521 May 13, 2015 darwin.morgan@nnsa.doe.gov Kelly Snyder, 702-295-2836 kelly.snyder@nnsa.doe.gov U.S. Department of Energy (DOE) Advisory Board to Meet A public meeting hosted by the Nevada Site Specific Advisory Board (NSSAB) will begin at 5 p.m., Wednesday, May 20, 2015, at the Frank H. Rogers Science and Technology Building, 755 East Flamingo Road, Las Vegas, Nevada. Planned meeting topics include

  1. Methods of producing adsorption media including a metal oxide

    DOE Patents [OSTI]

    Mann, Nicholas R; Tranter, Troy J

    2014-03-04

    Methods of producing a metal oxide are disclosed. The method comprises dissolving a metal salt in a reaction solvent to form a metal salt/reaction solvent solution. The metal salt is converted to a metal oxide and a caustic solution is added to the metal oxide/reaction solvent solution to adjust the pH of the metal oxide/reaction solvent solution to less than approximately 7.0. The metal oxide is precipitated and recovered. A method of producing adsorption media including the metal oxide is also disclosed, as is a precursor of an active component including particles of a metal oxide.

  2. Media Advisory - Jefferson Lab Hosts Summer Intern Science Poster Session |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab August 3, 2012 Time: 11:45 a.m. - 2 p.m. Place: The CEBAF Center lobby at Jefferson Lab, 12000 Jefferson Avenue, Newport News, VA 23606 Event: More than 35 high school and college interns that participated in Jefferson Lab's summer science enrichment programs will share their summer experiences and projects during a Poster Session. News Media representatives are invited to attend. Participating in this summer's poster session are: Twelve (12) Hampton Roads-area high school

  3. Media Advisory: March 7 Virginia Middle School Science Bowl Tournament |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab 7 Virginia Middle School Science Bowl Tournament Media Advisory: March 7 Virginia Middle School Science Bowl Tournament What: The 2009 Virginia Regional Middle School Science Bowl When: Saturday, March 7, 2009. Round-robin competition will run from 10 a.m. - noon. The double-elimination, semi-final and finalist rounds will run from 1:30 - 5 p.m. Awards will be presented immediately after the final round. Where: CEBAF Center Auditorium at the Thomas Jefferson National

  4. Using Web and Social Media for Influenza Surveillance

    SciTech Connect (OSTI)

    Corley, Courtney D.; Cook, Diane; Mikler, Armin R.; Singh, Karan P.

    2010-01-04

    Analysis of Google influenza-like-illness (ILI) search queries has shown a strongly correlated pattern with Centers for Disease Control (CDC) and Prevention seasonal ILI reporting data.Web and social media provide another resource to detect increases in ILI. This paper evaluates trends in blog posts that discuss influenza. Our key finding is that from 5-October 2008 to 31-January 2009 a high correlation exists between the frequency of posts, containing influenza keywords, per week and CDC influenza-like-illness surveillance data.

  5. Consumer Light Bulb Changes: Briefing and Resources for Media and Retailers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Consumer Light Bulb Changes: Briefing and Resources for Media and Retailers Consumer Light Bulb Changes: Briefing and Resources for Media and Retailers This presentation provides helpful background information on the new legislation and the types of energy-efficient lighting available today. PDF icon Consumer Light Bulb Changes: Briefing and Resources for Media and Retailers More Documents & Publications Interior Lighting Efficiency for Municipalities Lighting Tip

  6. http://www.energy.gov/media/F...Biofuels_Lower_Gas_Prices.pdf | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy energy.gov/media/F...Biofuels_Lower_Gas_Prices.pdf http://www.energy.gov/media/F...Biofuels_Lower_Gas_Prices.pdf PDF icon http://www.energy.gov/media/F...Biofuels_Lower_Gas_Prices.pdf More Documents & Publications Fact Sheet: Gas Prices and Oil Consumption Would Increase Without Biofuels Biofuels & Greenhouse Gas Emissions: Myths versus Facts Ethanol: Producting Food, Feed, and Fuel

  7. Fixation of radioactive ions in porous media with ion exchange gels

    DOE Patents [OSTI]

    Mercer, Jr., Basil W.; Godfrey, Wesley L.

    1979-01-01

    A method is provided for fixing radioactive ions in porous media by injecting into the porous media water-soluble organic monomers which are polymerizable to gel structures with ion exchange sites and polymerizing the monomers to form ion exchange gels. The ions and the particles of the porous media are thereby physically fixed in place by the gel structure and, in addition, the ions are chemically fixed by the ion exchange properties of the resulting gel.

  8. Wave Propagation in Jointed Geologic Media (Technical Report) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Wave Propagation in Jointed Geologic Media Citation Details In-Document Search Title: Wave Propagation in Jointed Geologic Media Predictive modeling capabilities for wave propagation in a jointed geologic media remain a modern day scientific frontier. In part this is due to a lack of comprehensive understanding of the complex physical processes associated with the transient response of geologic material, and in part it is due to numerical challenges that prohibit accurate

  9. April 27, 2011 - How to Work with the Media Webinar (text version) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy April 27, 2011 - How to Work with the Media Webinar (text version) April 27, 2011 - How to Work with the Media Webinar (text version) Text version of the Better Buildings webinar on April 27, 2011. PDF icon Webinar transcript More Documents & Publications Home Performance with ENERGY STAR Webinar (text version) May 21, 2011 - Getting Useful Real Time Feedback About Your Program Webinar (text version) Marketing & Driving Demand: Social Media Tools & Strategies

  10. Incorporation of pollution prevention into the engineering command media

    SciTech Connect (OSTI)

    Harrington, E.; Hammonds, C.

    1997-10-08

    It has long been recognized that incorporation of pollution prevention (P2) into projects during the design phase yields superior results as compared to modification of facilities after construction. Generation of waste during construction can be minimized, products containing recycled materials can be incorporated into the facility, and the processes or systems can be optimized for P2 from the beginning. However, design engineers must have the proper mindset and training in order to achieve this, since standard engineering practice does not necessarily lead to construction of systems that are optimized for P2. It was determined that incorporation of P2 principles and methods into command media that govern the conduct of design and construction was one way of achieving P2 objectives during design. This would incorporate certain P2 elements into criteria and standard designs so that these elements are automatically incorporated into the designs. The Central Engineering Services (CES) Command Media, which provide direction, methodology, and criteria for performance of engineering design and construction, consist of Engineering Procedures, Master Design Criteria, Technical Specifications, and Engineering Standards. Incorporated in these documents are regulatory requirements, national consensus codes and standards, accepted and proven practices and designs, as well as DOE Orders governing design and construction. The documents were reviewed to identify potential areas into which P2 principles, practices, and methodologies could be incorporated.

  11. Multicomponent, multiphase flow in porous media with temperature variation

    SciTech Connect (OSTI)

    Wingard, J.S.; Orr, F.M. Jr.

    1990-10-01

    Recovery of hydrocarbons from porous media is an ongoing concern. Advanced techniques augment conventional recovery methods by injecting fluids that favorably interact with the oil. These fluids interact with the oil by energy transfer, in the case of steam injection, or by mass transfer, as in a miscible gas flood. Often both thermal and compositional considerations are important. An understanding of these injection methods requires knowledge of how temperature variations, phase equilibrium and multiphase flow in porous media interact. The material balance for each component and energy balance are cast as a system of non-strictly hyperbolic partial differential equations. This system of equations is solved using the method of characteristics. The model takes into account the phase behavior by using the Peng-Robinson equation of state to partition the individual components into different phases. Temperature effects are accounted for by the energy balance. Flow effects are modelled by using fractional flow curves and a Stone's three phase relative permeability model. Three problems are discussed. The first problem eliminates the phase behavior aspect of the problem by studying the flow of a single component as it undergoes an isothermal phase change. The second couples the effects of temperature and flow behavior by including a second component that is immiscible with the original component. Phase behavior is added by using a set of three partially miscible components that partition into two or three separate phases. 66 refs., 54 figs., 14 tabs.

  12. Sum-Frequency Generation from Chiral Media and Interfaces

    SciTech Connect (OSTI)

    Ji, Na

    2006-02-13

    Sum frequency generation (SFG), a second-order nonlinear optical process, is electric-dipole forbidden in systems with inversion symmetry. As a result, it has been used to study chiral media and interfaces, systems intrinsically lacking inversion symmetry. This thesis describes recent progresses in the applications of and new insights into SFG from chiral media and interfaces. SFG from solutions of chiral amino acids is investigated, and a theoretical model explaining the origin and the strength of the chiral signal in electronic-resonance SFG spectroscopy is discussed. An interference scheme that allows us to distinguish enantiomers by measuring both the magnitude and the phase of the chiral SFG response is described, as well as a chiral SFG microscope producing chirality-sensitive images with sub-micron resolution. Exploiting atomic and molecular parity nonconservation, the SFG process is also used to solve the Ozma problems. Sum frequency vibrational spectroscopy is used to obtain the adsorption behavior of leucine molecules at air-water interfaces. With poly(tetrafluoroethylene) as a model system, we extend the application of this surface-sensitive vibrational spectroscopy to fluorine-containing polymers.

  13. Measurement of Interfacial Area Production and Permeability within Porous Media

    SciTech Connect (OSTI)

    Crandall, Dustin; Ahmadi, Goodarz; Smith, Duane H.

    2010-01-01

    An understanding of the pore-level interactions that affect multi-phase flow in porous media is important in many subsurface engineering applications, including enhanced oil recovery, remediation of dense non-aqueous liquid contaminated sites, and geologic CO2 sequestration. Standard models of two-phase flow in porous media have been shown to have several shortcomings, which might partially be overcome using a recently developed model based on thermodynamic principles that includes interfacial area as an additional parameter. A few static experimental studies have been previously performed, which allowed the determination of static parameters of the model, but no information exists concerning the interfacial area dynamic parameters. A new experimental porous flow cell that was constructed using stereolithography for two-phase gas-liquid flow studies was used in conjunction with an in-house analysis code to provide information on dynamic evolution of both fluid phases and gas-liquid interfaces. In this paper, we give a brief introduction to the new generalized model of two-phase flow model and describe how the stereolithography flow cell experimental setup was used to obtain the dynamic parameters for the interfacial area numerical model. In particular, the methods used to determine the interfacial area permeability and production terms are shown.

  14. Recombinant host cells and media for ethanol production

    DOE Patents [OSTI]

    Wood, Brent E; Ingram, Lonnie O; Yomano, Lorraine P; York, Sean W

    2014-02-18

    Disclosed are recombinant host cells suitable for degrading an oligosaccharide that have been optimized for growth and production of high yields of ethanol, and methods of making and using these cells. The invention further provides minimal media comprising urea-like compounds for economical production of ethanol by recombinant microorganisms. Recombinant host cells in accordance with the invention are modified by gene mutation to eliminate genes responsible for the production of unwanted products other than ethanol, thereby increasing the yield of ethanol produced from the oligosaccharides, relative to unmutated parent strains. The new and improved strains of recombinant bacteria are capable of superior ethanol productivity and yield when grown under conditions suitable for fermentation in minimal growth media containing inexpensive reagents. Systems optimized for ethanol production combine a selected optimized minimal medium with a recombinant host cell optimized for use in the selected medium. Preferred systems are suitable for efficient ethanol production by simultaneous saccharification and fermentation (SSF) using lignocellulose as an oligosaccharide source. The invention also provides novel isolated polynucleotide sequences, polypeptide sequences, vectors and antibodies.

  15. Repetitive Regeneration of Media #1 after REE Sorption from Brine #1 at 70C

    SciTech Connect (OSTI)

    Gary Garland

    2015-07-23

    This dataset shows the ability of media #1 to be loaded with REE's, stripped of the REE's sequestered, regenerated, and reused over many cycles.

  16. Slurried solid media for simultaneous water purification and carbon dioxide removal from gas mixtures

    DOE Patents [OSTI]

    Aines, Roger D.; Bourcier, William L.; Viani, Brian

    2013-01-29

    A slurried solid media for simultaneous water purification and carbon dioxide removal from gas mixtures includes the steps of dissolving the gas mixture and carbon dioxide in water providing a gas, carbon dioxide, water mixture; adding a porous solid media to the gas, carbon dioxide, water mixture forming a slurry of gas, carbon dioxide, water, and porous solid media; heating the slurry of gas, carbon dioxide, water, and porous solid media producing steam; and cooling the steam to produce purified water and carbon dioxide.

  17. Media Advisory: 2015 SunShot Catalyst Prize Demo Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Media Advisory: 2015 SunShot Catalyst Prize Demo Day Media Advisory: 2015 SunShot Catalyst Prize Demo Day May 7, 2015 - 1:08pm Addthis Media Advisory: 2015 SunShot Catalyst Prize Demo Day SAN FRANCISCO - Members of the media are invited to attend the U.S. Department of Energy SunShot Initiative's Catalyst prize Demo Day in San Francisco on Thursday, May 14. The SunShot Catalyst prize program is designed to address many of the challenges preventing ubiquitous, affordable solar energy deployment

  18. Media Invitation: 2014 SunShot Grand Challenge Summit and Peer Review |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Media Invitation: 2014 SunShot Grand Challenge Summit and Peer Review Media Invitation: 2014 SunShot Grand Challenge Summit and Peer Review April 14, 2014 - 4:27pm Addthis Media Invitation: 2014 SunShot Grand Challenge Summit and Peer Review You're Invited: 2014 SunShot Grand Challenge Summit and Peer Review Hear from solar's brightest visionaries about what's on the horizon for the U.S. solar energy industry WASHINGTON, D.C. -- Members of the media are invited to attend

  19. Using Social Media for Long-Term Branding | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Using Social Media for Long-Term Branding Better Buildings Residential Network Marketing ... Effective Strategies for Participating in Utility Planning Marketing & Driving Demand ...

  20. V-236: MediaWiki CentralAuth Extension Authentication Bypass Vulnerability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 6: MediaWiki CentralAuth Extension Authentication Bypass Vulnerability V-236: MediaWiki CentralAuth Extension Authentication Bypass Vulnerability September 6, 2013 - 4:36am Addthis PROBLEM: A vulnerability has been reported in the CentralAuth extension for MediaWiki, which can be exploited by malicious people to bypass certain security restrictions. PLATFORM: MediaWiki CentralAuth Extension ABSTRACT: A vulnerability has been reported in the CentralAuth extension for

  1. Social Media and Messages that Matter – Top Tips and Tools

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Social Media and Messages that Matter – Top Tips and Tools, call slides and discussion summary.

  2. Thermal conductivity of multi-fluid saturated porous media(Thesis...

    Office of Scientific and Technical Information (OSTI)

    ThesisDissertation: Thermal conductivity of multi-fluid saturated porous media Citation Details In-Document Search Title: Thermal conductivity of multi-fluid saturated porous ...

  3. V-236: MediaWiki CentralAuth Extension Authentication Bypass...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-236: MediaWiki CentralAuth Extension Authentication Bypass Vulnerability September 6, ... - Using Technology to Increase Transparency V-057: eXtplorer "extfinduser()" ...

  4. Marketing and Driving Demand Collaborative: Social Media Tools and Strategies Webinar

    Broader source: Energy.gov [DOE]

    Marketing and Driving Demand Collaborative: Social Media Tools and Strategies Webinar, from the U.S. Department of Energy's Better Buildings program.

  5. DOE News Media Contact: Tim Runyon (575) 234-7545 New Mexico Environment Media Contact: Allison Majure (505) 827-0314

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Media Contact: Tim Runyon (575) 234-7545 New Mexico Environment Media Contact: Allison Majure (505) 827-0314 For Immediate Release Nitrate Waste Stream Isolated at WIPP CARLSBAD, NM - Today, the Department of Energy (DOE) and the New Mexico Environment Department (NMED) announced the isolation of all waste containers from the Los Alamos National Laboratory nitrate salt bearing waste stream that was determined to be responsible for the 2014 radiological release. Closure of the Waste

  6. Ganglion dynamics of Supercritical CO2 in heterogeneous media

    Office of Scientific and Technical Information (OSTI)

    Ganglion dynamics of Supercritical CO2 in heterogeneous media SAND2015-2548C \ 1.E+01 Mobile 1.E+00 Trapped £ 1.E-01 1.E-02 1.0E-05 1.0E-04 1.0E-03 1.0E-02 Pore diameter (2rp) (m) 1.0 1.E+00 0.9 0.8 0.7 1.E-01 / / 1.E-02 £ 40 0.3 0.2 Ganglion size (cm) 0.1 0.0 1.E-03 1.E-04 1.E-03 1.E-02 Water Flow Velocity (Vw°) (m/s) Trapping efficiency Injectivity Permeability or porosity Research Team Y Wang, MJ Martinez & K Chojnicki Objectives of Research - Develop observationaNy-constrained models

  7. Cross-media approach to saving the Chesapeake Bay

    SciTech Connect (OSTI)

    Appleton, E.L.

    1995-12-01

    A project EPA began in August will investigate the possibility of cross-media emissions trading as a new approach to reducing nitrogen loadings to the Chesapeake Bay. Working with the Environmental Defense Fund (EDF), the Agency hopes to device a NO{sub x} trading framework along the lines of existing sulfur dioxide trading plans to control acid rain. The Chesapeake Air Project will examine the feasibility of using emissions trading between and water sources, including trading credits between power plants and mobile sources, to reduce the atmospheric deposition of nitrogen to the bay. The progress of the Bay Program nutrient reduction goals is up for reevaluation in 1997, and Knopes and EDF economist Brian Morton have high hopes that the trading plan, which would place a cap on the mass of emissions and rate of deposition allowed by all sources, will become the atmospheric deposition portion of the Chesapeake Bay Program`s Nutrient Reduction Strategy. 6 refs.

  8. Fischer-Tropsch synthesis in supercritical reaction media

    SciTech Connect (OSTI)

    Subramaniam, B.; Bochniak, D.; Snavely, K.

    1993-04-01

    The reactor configuration has been modified to handle tows both in the upflow and downflow directions. For comparison to bubble column operation, an upflow mode of operation will be used. For comparison to trickle-bed operation, a downflow mode will be employed. Thus, this modification allows the most flexibility for studying the effects of liquid and supercritical reaction media on the Fischer-Tropsch synthesis reaction and permits comparisons of our experimental results with previous work. A stainless steel reactor tube was ordered. This unit along with three other pieces of tubing (greater than 1/4in. i. d.) are to be sent to Alon Processing Co. for alonizing (passivating) the internal surface. This process had been employed by Huff and Satterfield (1983) to ensure that the stainless steel surfaces are catalytically inert at high temperatures (> 200[degree]C).

  9. EVALUATION OF ALTERNATIVE FILTER MEDIA FOR THE ROTARY MICROFILTER

    SciTech Connect (OSTI)

    Poirier, M.; Herman, D.; Bhave, R.

    2011-09-13

    SRS is currently developing and testing several processes to treat high level radioactive liquid waste. These processes include the Integrated Salt Disposition Process (ISDP), the Salt Waste Processing Facility (SWPF), and the Small Column Ion Exchange Process (SCIX). Each of these processes has a solid-liquid separation process that limits its throughput. SRNL researchers identified and tested the rotary microfilter as a technology to increase solid-liquid separation throughput. The testing showed significant improvement in filter flux with the rotary microfilter over the baseline crossflow filter (i.e., 2.5-6.5X during scoping tests, as much as 10X in actual waste tests, and approximately 3X in pilot-scale tests). SRNL received funding from DOE EM-21, and subsequently DOE EM-31 to develop the rotary microfilter for high level radioactive service. The work has included upgrading the rotary microfilter for radioactive service, testing with simulated SRS waste streams, and testing it with simulated Hanford waste streams. While the filtration rate is better than that obtained during testing of crossflow filters, the authors believe the rotary microfilter throughput can be improved by using a better filter membrane. The rotary microfilter membrane is made of stainless steel (Pall PMM050). Previous testing, funded by DOE EM-21, showed that asymmetric filters composed of a ceramic membrane on top of a stainless steel support produced higher filter flux than 100% stainless steel symmetric filters in crossflow filter tests. In that testing, the Pall Accusep and Graver filters produced 13-21% larger filter flux than the baseline 0.1 {micro}m Mott filter. While the improvement in flux is not as dramatic as the improvement of the rotary filter over a crossflow filter, a 13-21% increase could reduce the lifetime of a 30 year process by 4-6 years, with significant cost savings. Subsequent rotary filter testing showed the Pall PMM050 stainless steel filter membrane produced higher flux than the Mott filter media in bench-scale and pilot-scale testing. The Accusep and Graver filter media were not evaluated in that testing, because they are not available as flat sheets. The Accusep filter was developed at ORNL and licensed to Pall Corporation. This filter has a stainless steel support structure with a zirconium oxide ceramic membrane. The pore size is 0.1 {micro}m absolute. The Graver filter has a stainless steel support structure with a titanium dioxide ceramic membrane. The pore size is 0.07 {micro}m absolute. SRNL and ORNL are working together to develop filter media similar to the Accusep and Graver media, and to test them in a bench-scale filtration apparatus to attempt to improve the throughput of the rotary microfilter. This report describes the effort.

  10. Centrifuge Techniques and Apparatus for Transport Experiments in Porous Media

    SciTech Connect (OSTI)

    Earl D. Mattson; Carl D. Paler; Robert W. Smith; Markus Flury

    2010-06-01

    This paper describes experimental approaches and apparatus that we have developed to study solute and colloid transport in porous media using Idaho National Laboratory's 2-m radius centrifuge. The ex-perimental techniques include water flux scaling with applied acceleration at the top of the column and sub-atmospheric pressure control at the column base, automation of data collection, and remote experimental con-trol over the internet. These apparatus include a constant displacement piston pump, a custom designed liquid fraction collector based on switching valve technology, and modified moisture monitoring equipment. Suc-cessful development of these experimental techniques and equipment is illustrated through application to transport of a conservative tracer through unsaturated sand column, with centrifugal acceleration up to 40 gs. Development of such experimental equipment that can withstand high accelerations enhances the centrifuge technique to conduct highly controlled unsaturated solute/colloid transport experiments and allows in-flight liquid sample collection of the effluent.

  11. Investigations of stacking fault density in perpendicular recording media

    SciTech Connect (OSTI)

    Piramanayagam, S. N. Varghese, Binni; Yang, Yi; Kiat Lee, Wee; Khume Tan, Hang

    2014-06-28

    In magnetic recording media, the grains or clusters reverse their magnetization over a range of reversal field, resulting in a switching field distribution. In order to achieve high areal densities, it is desirable to understand and minimize such a distribution. Clusters of grains which contain stacking faults (SF) or fcc phase have lower anisotropy, an order lower than those without them. It is believed that such low anisotropy regions reverse their magnetization at a much lower reversal field than the rest of the material with a larger anisotropy. Such clusters/grains cause recording performance deterioration, such as adjacent track erasure and dc noise. Therefore, the observation of clusters that reverse at very low reversal fields (nucleation sites, NS) could give information on the noise and the adjacent track erasure. Potentially, the observed clusters could also provide information on the SF. In this paper, we study the reversal of nucleation sites in granular perpendicular media based on a magnetic force microscope (MFM) methodology and validate the observations with high resolution cross-section transmission electron microscopy (HRTEM) measurements. Samples, wherein a high anisotropy CoPt layer was introduced to control the NS or SF in a systematic way, were evaluated by MFM, TEM, and magnetometry. The magnetic properties indicated that the thickness of the CoPt layer results in an increase of nucleation sites. TEM measurements indicated a correlation between the thickness of CoPt layer and the stacking fault density. A clear correlation was also observed between the MFM results, TEM observations, and the coercivity and nucleation field of the samples, validating the effectiveness of the proposed method in evaluating the nucleation sites which potentially arise from stacking faults.

  12. Proceedings: Geotechnology workshop on compressed-air energy storage in porous media sites

    SciTech Connect (OSTI)

    Not Available

    1987-07-01

    The extensive experience of the natural gas industry with gas storage in underground porous media is directly applicable to the storage of air for compressed-air energy storage plants. In this workshop, natural gas industry representatives provided utility personnel with a basic understanding of the geology of porous media and strategies for developing air storage reservoirs.

  13. Social Media and the NRC: What We're Doing, Why We're Doing It...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media and the NRC: What We're Doing, Why We're Doing It, and What Else We Might Do Social Media and the NRC: What We're Doing, Why We're Doing It, and What Else We Might Do ...

  14. Atmospheric-pressure air microplasma jets in aqueous media for the inactivation of Pseudomonas fluorescens cells

    SciTech Connect (OSTI)

    Zhang, Xianhui; Yang, Si-ze [Fujian Provincial Key Laboratory of Plasma and Magnetic Resonance, School of Physics and Mechanical and Electrical Engineering, Xiamen University, Xiamen, Fujian 361005 (China)] [Fujian Provincial Key Laboratory of Plasma and Magnetic Resonance, School of Physics and Mechanical and Electrical Engineering, Xiamen University, Xiamen, Fujian 361005 (China); Liu, Dongping [Fujian Provincial Key Laboratory of Plasma and Magnetic Resonance, School of Physics and Mechanical and Electrical Engineering, Xiamen University, Xiamen, Fujian 361005 (China) [Fujian Provincial Key Laboratory of Plasma and Magnetic Resonance, School of Physics and Mechanical and Electrical Engineering, Xiamen University, Xiamen, Fujian 361005 (China); School of Physics and Materials Engineering, Dalian Nationalities University, Dalian 116600 (China); Song, Ying [School of Physics and Materials Engineering, Dalian Nationalities University, Dalian 116600 (China) [School of Physics and Materials Engineering, Dalian Nationalities University, Dalian 116600 (China); School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116023 (China); Sun, Yue [School of Physics, Changchun University of Science and Technology, Changchun 130022 (China)] [School of Physics, Changchun University of Science and Technology, Changchun 130022 (China)

    2013-05-15

    The hollow fiber-based cold air microplasma jet array running at atmospheric pressure has been designed to inactivate Pseudomonas fluorescens (P. fluorescens) cells in vitro in aqueous media. The influences of electrode configurations, air flow rate, and applied voltage on the discharge characteristics of the single microplasma jet operating in aqueous media are presented, and the bactericidal efficiency of the hollow fibers-based and large-volume microplasma jet array is reported. Optical emission spectroscopy is utilized to identify excited species during the antibacterial testing of plasma in solutions. These well-aligned and rather stable air microplasma jets containing a variety of short-lived species, such as OH and O radicals and charged particles, are in direct contact with aqueous media and are very effective in killing P. fluorescens cells in aqueous media. This design shows its potential application for atmospheric pressure air plasma inactivation of bacteria cells in aqueous media.

  15. Direct, Dynamic Measurement of Interfacial Area within Porous Media

    SciTech Connect (OSTI)

    Crandall, Dustin; Ahmadi, Goodarz; Smith, Duane H.; Bromhal, Grant

    2010-01-01

    Standard models of two-phase flow in porous media have been shown to exhibit several shortcomings that might be partially overcome with a recently developed model based on thermodynamic principles (Hassanizadeh and Gray, 1990). This alternative two-phase flow model contains a set of new and non-standard parameters, including specific interfacial area. By incorporating interfacial area production, destruction, and propagation into functional relationships that describe the capillary pressure and saturation, a more physical model has been developed. Niessner and Hassanizadeh (2008) have examined this model numerically and have shown that the model captures saturation hysteresis with drainage/imbibition cycles. Several static experimental studies have been performed to examine the validity of this new thermodynamically based approach; these allow the determination of static parameters of the model. To date, no experimental studies have obtained information about the dynamic parameters required for the model. A new experimental porous flow cell has been constructed using stereolithography to study two-phase flow phenomena (Crandall et al. 2008). A novel image analysis tool was developed for an examination of the evolution of flow patterns during displacement experiments (Crandall et al. 2009). This analysis tool enables the direct quantification of interfacial area between fluids by matching known geometrical properties of the constructed flow cell with locations identified as interfaces from images of flowing fluids. Numerous images were obtained from two-phase experiments within the flow cell. The dynamic evolution of the fluid distribution and the fluid-fluid interface locations were determined by analyzing these images. In this paper, we give a brief introduction to the thermodynamically based two-phase flow model, review the properties of the stereolithography flow cell, and show how the image analysis procedure has been used to obtain dynamic parameters for the numerical model. These parameters include production/destruction of interfacial area as a function of saturation and capillary pressure. Our preliminary results for primary drainage in porous media show that the specific interfacial area increased linearly with increasing gas saturation until breakthrough of the displacing gas into the exit manifold occurred.

  16. Using social media for actionable disease surveillance and outbreak management. A systematic literature review

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Charles-Smith, Lauren E.; Reynolds, Tera L.; Cameron, Mark A.; Conway, Mike; Lau, Eric H. Y.; Olsen, Jennifer M.; Pavlin, Julie A.; Shigematsu, Mika; Streichert, Laura C.; Suda, Katie J.; et al

    2015-10-05

    Here, research studies show that social media may be valuable tools in the disease surveillance toolkit used for improving public health professionals’ ability to detect disease outbreaks faster than traditional methods and to enhance outbreak response. A social media work group, consisting of surveillance practitioners, academic researchers, and other subject matter experts convened by the International Society for Disease Surveillance, conducted a systematic primary literature review using the PRISMA framework to identify research, published through February 2013, answering either of the following questions: 1) Can social media be integrated into disease surveillance practice and outbreak management to support and improvemore » public health? 2) Can social media be used to effectively target populations, specifically vulnerable populations, to test an intervention and interact with a community to improve health outcomes? Examples of social media included are Facebook, MySpace, microblogs (e.g., Twitter), blogs, and discussion forums. For Question 1, 33 manuscripts were identified, starting in 2009 with topics on Influenza-like Illnesses (n=15), Infectious Diseases (n = 6), Non-infectious Diseases (n=4), Medication and Vaccines (n=3), and Other (n=5). For Question 2, 32 manuscripts were identified, the first in 2000 with topics on Health Risk Behaviors (n=10), Infectious Diseases (n = 3), Non-infectious Diseases (n=9), and Other (n=10). The literature on the use of social media to support public health practice has identified many gaps and biases in current knowledge. Despite the potential for success identified in exploratory studies, there are limited studies on interventions and little use of social media in practice. However, information gleaned from the articles demonstrates the effectiveness of social media in supporting and improving public health and in identifying target populations for intervention. A primary recommendation resulting from the review is to identify opportunities that enable public health professionals to integrate social media analytics into disease surveillance and outbreak management practice.« less

  17. Using social media for actionable disease surveillance and outbreak management. A systematic literature review

    SciTech Connect (OSTI)

    Charles-Smith, Lauren E.; Reynolds, Tera L.; Cameron, Mark A.; Conway, Mike; Lau, Eric H. Y.; Olsen, Jennifer M.; Pavlin, Julie A.; Shigematsu, Mika; Streichert, Laura C.; Suda, Katie J.; Corley, Courtney D.; Braunstein, Lidia Adriana

    2015-10-05

    Here, research studies show that social media may be valuable tools in the disease surveillance toolkit used for improving public health professionals’ ability to detect disease outbreaks faster than traditional methods and to enhance outbreak response. A social media work group, consisting of surveillance practitioners, academic researchers, and other subject matter experts convened by the International Society for Disease Surveillance, conducted a systematic primary literature review using the PRISMA framework to identify research, published through February 2013, answering either of the following questions: 1) Can social media be integrated into disease surveillance practice and outbreak management to support and improve public health? 2) Can social media be used to effectively target populations, specifically vulnerable populations, to test an intervention and interact with a community to improve health outcomes? Examples of social media included are Facebook, MySpace, microblogs (e.g., Twitter), blogs, and discussion forums. For Question 1, 33 manuscripts were identified, starting in 2009 with topics on Influenza-like Illnesses (n=15), Infectious Diseases (n = 6), Non-infectious Diseases (n=4), Medication and Vaccines (n=3), and Other (n=5). For Question 2, 32 manuscripts were identified, the first in 2000 with topics on Health Risk Behaviors (n=10), Infectious Diseases (n = 3), Non-infectious Diseases (n=9), and Other (n=10). The literature on the use of social media to support public health practice has identified many gaps and biases in current knowledge. Despite the potential for success identified in exploratory studies, there are limited studies on interventions and little use of social media in practice. However, information gleaned from the articles demonstrates the effectiveness of social media in supporting and improving public health and in identifying target populations for intervention. A primary recommendation resulting from the review is to identify opportunities that enable public health professionals to integrate social media analytics into disease surveillance and outbreak management practice.

  18. Using Social Media for Actionable Disease Surveillance and Outbreak Management: A Systematic Literature Review

    SciTech Connect (OSTI)

    Charles-Smith, Lauren E.; Reynolds, Tera; Cameron, Mark; Conway, Mike; Lau, Eric H.; Olsen, Jennifer; Pavlin, Julie A.; Shigematsu, Mika; Streichert, Laura; Suda, Katie; Corley, Courtney D.

    2015-10-05

    Research studies show that social media may be valuable tools in the disease surveillance toolkit used for improving public health professionals ability to detect disease outbreaks faster than traditional methods and to enhance outbreak response. A social media work group, consisting of surveillance practitioners, academic researchers, and other subject matter experts convened by the International Society for Disease Surveillance, conducted a systematic primary literature review using the PRISMA framework to identify research, published through February 2013, answering either of the following questions: 1) Can social media be integrated into disease surveillance practice and outbreak management to support and improve public health? 2) Can social media be used to effectively target populations, specifically vulnerable populations, to test an intervention and interact with a community to improve health outcomes? Examples of social media included are Facebook, MySpace, microblogs (e.g., Twitter), blogs, and discussion forums. For Question 1, 33 manuscripts were identified, starting in 2009 with topics on Influenza-like Illnesses (n=15), Infectious Diseases (n = 6), Non-infectious Diseases (n=4), Medication and Vaccines (n=3), and Other (n=5). For Question 2, 32 manuscripts were identified, the first in 2000 with topics on Health Risk Behaviors (n=10), Infectious Diseases (n = 3), Non-infectious Diseases (n=9), and Other (n=10). The literature on the use of social media to support public health practice has identified many gaps and biases in current knowledge. Despite the potential for success identified in exploratory studies, there are limited studies on interventions and little use of social media in practice. However, information gleaned from the articles demonstrates the effectiveness of social media in supporting and improving public health and in identifying target populations for intervention. A primary recommendation resulting from the review is to identify opportunities that enable public health professionals to integrate social media analytics into disease surveillance and outbreak management practice.

  19. Femtosecond laser ablation of brass in air and liquid media

    SciTech Connect (OSTI)

    Shaheen, M. E.; Department of Physics, Faculty of Sciences, Tanta University, Tanta ; Gagnon, J. E.; Fryer, B. J.; Department of Earth and Environmental Sciences, University of Windsor, Windsor, Ontario N9B 3P4

    2013-06-07

    Laser ablation of brass in air, water, and ethanol was investigated using a femtosecond laser system operating at a wavelength of 785 nm and a pulse width less than 130 fs. Scanning electron and optical microscopy were used to study the efficiency and quality of laser ablation in the three ablation media at two different ablation modes. With a liquid layer thickness of 3 mm above the target, ablation rate was found to be higher in water and ethanol than in air. Ablation under water and ethanol showed cleaner surfaces and less debris re-deposition compared to ablation in air. In addition to spherical particles that are normally formed from re-solidified molten material, micro-scale particles with varying morphologies were observed scattered in the ablated structures (craters and grooves) when ablation was conducted under water. The presence of such particles indicates the presence of a non-thermal ablation mechanism that becomes more apparent when ablation is conducted under water.

  20. Centrifuge study of DNAPL transport in granular media

    SciTech Connect (OSTI)

    Pantazidou, M.; Abu-Hassanein, Z.S.; Riemer, M.F.

    2000-02-01

    The migration potential of dense nonaqueous phase liquids (DNAPLs) in saturated soil was investigated experimentally using the elevated acceleration field of the geotechnical centrifuge. The transport of the DNAPL was monitored with a video camera in flight, through the transparent wall of the sample box. By using measurements of the velocity of the DNAPL front from models corresponding to the same prototype and applying the technique of modeling of models, the stable infiltration of a low density, high viscosity DNAPL in saturated homogeneous media was shown to scale properly in the centrifuge. The visual observations confirmed the correlations between the DNAPL physicochemical properties and transport patterns, which have important consequences for the characterization of DNAPL-contaminated sites. Infiltrating DNAPLs of high density and low viscosity displace water in an unstable manner and create extensive contaminated areas characterized by non-uniform DNAPL distributions. In contrast, the displacement of water by DNAPLs of low density and high viscosity is stable and efficient, and hence, results in smaller contaminated areas of high DNAPL saturation. Numerical simulations yielded predictions and sensitivity analysis results that agreed well with these experimental observations.

  1. Inverse problems in heterogeneous and fractured media using peridynamics

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Turner, Daniel Z.; van Bloemen Waanders, Bart G.; Parks, Michael L.

    2015-12-10

    The following work presents an adjoint-based methodology for solving inverse problems in heterogeneous and fractured media using state-based peridynamics. We show that the inner product involving the peridynamic operators is self-adjoint. The proposed method is illustrated for several numerical examples with constant and spatially varying material parameters as well as in the context of fractures. We also present a framework for obtaining material parameters by integrating digital image correlation (DIC) with inverse analysis. This framework is demonstrated by evaluating the bulk and shear moduli for a sample of nuclear graphite using digital photographs taken during the experiment. The resulting measuredmore » values correspond well with other results reported in the literature. Lastly, we show that this framework can be used to determine the load state given observed measurements of a crack opening. Furthermore, this type of analysis has many applications in characterizing subsurface stress-state conditions given fracture patterns in cores of geologic material.« less

  2. Colloid suspension stability and transport through unsaturated porous media

    SciTech Connect (OSTI)

    McGraw, M.A.; Kaplan, D.I.

    1997-04-01

    Contaminant transport is traditionally modeled in a two-phase system: a mobile aqueous phase and an immobile solid phase. Over the last 15 years, there has been an increasing awareness of a third, mobile solid phase. This mobile solid phase, or mobile colloids, are organic or inorganic submicron-sized particles that move with groundwater flow. When colloids are present, the net effect on radionuclide transport is that radionuclides can move faster through the system. It is not known whether mobile colloids exist in the subsurface environment of the Hanford Site. Furthermore, it is not known if mobile colloids would likely exist in a plume emanating from a Low Level Waste (LLW) disposal site. No attempt was made in this study to ascertain whether colloids would form. Instead, experiments and calculations were conducted to evaluate the likelihood that colloids, if formed, would remain in suspension and move through saturated and unsaturated sediments. The objectives of this study were to evaluate three aspects of colloid-facilitated transport of radionuclides as they specifically relate to the LLW Performance Assessment. These objectives were: (1) determine if the chemical conditions likely to exist in the near and far field of the proposed disposal site are prone to induce flocculation (settling of colloids from suspension) or dispersion of naturally occurring Hanford colloids, (2) identify the important mechanisms likely involved in the removal of colloids from a Hanford sediment, and (3) determine if colloids can move through unsaturated porous media.

  3. Rich n-heptane and diesel combustion in porous media

    SciTech Connect (OSTI)

    Pastore, A.; Mastorakos, E.

    2010-04-15

    Rich n-heptane and diesel flames in two-layer porous media are experimentally investigated in the context of syngas production. The stable operating points of n-heptane reforming have been determined and the mole fractions of H{sub 2}, CO, CO{sub 2} and light hydrocarbons have been measured in the exhaust gas at an equivalence ratio of 2 for different thermal input values. The reformer performance has been assessed also from the point of view of the heat losses and the mixture homogeneity. The pre-vapouriser produces an approximately uniform vapour-air mixture upstream of the flame front. The range of flow rates for stable flames decreased with increasing equivalence ratio. Heat losses were about 10% of the thermal input at high firing rates. A 77.2% of the equilibrium H{sub 2} was achieved at a flame speed of 0.82 m/s. The same reactor with a different porous matrix for the reforming stage demonstrates diesel reforming to syngas with a conversion efficiency of 77.3% for a flame speed of 0.65 m/s. (author)

  4. Evaluation of porous media heat exchangers for fusion applications

    SciTech Connect (OSTI)

    Rosenfeld, J.H.; Lindemuth, J.E.; North, M.T.; Watson, R.D.; Youchison, D.L.; Goulding, R.H.

    1996-07-01

    Several types of porous media heat exchangers are being evaluated for use in fusion applications. Broadly, these devices can be classified as capillary-pumped (heat pipes) or mechanically-pumped heat exchangers. Monel/water thermosyphon heat pipes with a porous metal wick are being evaluated for use in Faraday shields. A subscale prototype has been fabricated, and initial tests at Oak Ridge National Laboratory have shown favorable results. Alkali metal heat pipes have demonstrated absorbed heat flux capability of over 1000 MW/m{sup 2}. An advanced gyrotron microwave cavity is being developed that uses water cooling in a mechanically-pumped copper porous metal heat exchanger. Tests on a prototype demonstrated absorbed heat flux capability in excess of 100 MW/m{sup 2}. Porous metal heat exchangers with helium, water, or liquid metal coolants are being evaluated for plasma-facing component cooling. Tests on a helium/copper porous metal heat exchanger demonstrated absorbed heat flux capability in excess of 15 MW/m{sup 2}. Applications, conceptual designs, fabricated hardware, and test results are summarized. 22 refs., 5 figs., 2 tabs.

  5. LOCAL RADIATION MAGNETOHYDRODYNAMIC INSTABILITIES IN MAGNETICALLY STRATIFIED MEDIA

    SciTech Connect (OSTI)

    Tao, Ted; Blaes, Omer

    2011-11-20

    We study local radiation magnetohydrodynamic instabilities in static, optically thick, vertically stratified media with constant flux mean opacity. We include the effects of vertical gradients in a horizontal background magnetic field. Assuming rapid radiative diffusion, we use the zero gas pressure limit as an entry point for investigating the coupling between the photon bubble instability and the Parker instability. Apart from factors that depend on wavenumber orientation, the Parker instability exists for wavelengths longer than a characteristic wavelength {lambda}{sub tran}, while photon bubbles exist for wavelengths shorter than {lambda}{sub tran}. The growth rate in the Parker regime is independent of the orientation of the horizontal component of the wavenumber when radiative diffusion is rapid, but the range of Parker-like wavenumbers is extended if there exists strong horizontal shear between field lines (i.e., horizontal wavenumber perpendicular to the magnetic field). Finite gas pressure introduces an additional short-wavelength limit to the Parker-like behavior, and also limits the growth rate of the photon bubble instability to a constant value at short wavelengths. We also consider the effects of differential rotation with accretion disk applications in mind. Our results may explain why photon bubbles have not yet been observed in recent stratified shearing box accretion disk simulations. Photon bubbles may physically exist in simulations with high radiation to gas pressure ratios, but higher spatial resolution will be needed to resolve the asymptotically growing unstable wavelengths.

  6. Microbial Activity and Precipitation at Solution-Solution Mixing Zones in Porous Media Subsurface Biogeochemical Research

    SciTech Connect (OSTI)

    Colwell, Frederick; Wildenschild, Dorthe; Wood, Brian; Gerlach, Robin; Redden, George

    2014-08-29

    The goal for this research was to understand how best to add compounds to receptive microbial communities in porous media in order to achieve optimal calcite precipitation in a volumetrically significant space and to understand the physiological health of the cells that are responsible for the calcite precipitation. The specific objectives were to: (1) develop better tools for visually examining biofilms in porous media and calcium carbonate precipitation being mediated by microbes in porous media, and (2) demonstrate the effectiveness of using that tool within a flow cell model system.

  7. Critique of Burnett-Frind dispersion tensor for axisymmetric porous media

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Journal Article: Critique of Burnett-Frind dispersion tensor for axisymmetric porous media Citation Details In-Document Search Title: Critique of Burnett-Frind dispersion tensor for axisymmetric porous media This technical note provides a critique of the Burnett and Frind (1987) dispersion tensor for porous media with axial symmetry based on a previous publication by the authors (Lichtner et aI., 2002). In this work a new approach is used based on unit

  8. Secretary Chu to Host Media Briefing on Energy Department FY 2013 Budget

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Request | Department of Energy Media Briefing on Energy Department FY 2013 Budget Request Secretary Chu to Host Media Briefing on Energy Department FY 2013 Budget Request February 10, 2012 - 2:29pm Addthis Washington, D.C. - On Monday, February 13, 2012, U.S. Energy Secretary Steven Chu will host a media briefing on the Energy Department's Fiscal Year 2013 Budget Request, outlining the proposed investments in an all-of-the-above energy strategy that includes critical innovation, in the

  9. SunShot Catalyst Demo Day 2015 Media Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Catalyst Demo Day 2015 Media Resources SunShot Catalyst Demo Day 2015 Media Resources SunShot Catalyst Demo Day 2015 Media Resources SunShot Catalyst is an open innovation program that aims to catalyze the rapid creation and development of products and solutions that address near-term challenges in the U.S. solar marketplace. Through a series of prize challenges, SunShot Catalyst makes it faster and easier for American innovators to launch cutting-edge solar companies, while tackling

  10. Media invited to Jefferson Lab prior to April 16 Open House, and also

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    welcome day of event | Jefferson Lab 16 Open House, and also welcome day of event Explanation Hall C Leader Rolf Ent discusses the dynamics of an experiment with visitors in Hall C. Photo: Greg Adams, Jefferson Lab Media Advisory: Media invited to Jefferson Lab prior to April 16 Open House, and also welcome day of event March 30, 2005 News media representatives wishing to visit the Jefferson Lab in the weeks leading up to the April 16 Open House, may contact JLab Public Affairs Manager Linda

  11. Media for control of thermal emission and methods of applications thereof

    DOE Patents [OSTI]

    Lin, Shawn-Yu; Fleming, James G.

    2002-01-01

    A new class of media for control of emission of thermal radiation from an object or part thereof is disclosed. These materials can be used for a wide variety of thermal control applications.

  12. Media Contact: Deb Gill U.S. DOE Carlsbad Field Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    More - Media Contact: Deb Gill U.S. DOE Carlsbad Field Office (575) 234-7270 www.wipp.energy.gov U.S. Department of Energy Carlsbad Field Office Waste Isolation Pilot Plant P.O....

  13. Deputy Secretary Poneman to Host Media Briefing on Energy Department FY 2014 Budget Request

    Broader source: Energy.gov [DOE]

    On Wednesday, April 10, 2013, U.S. Department of Energy Deputy Secretary Daniel Poneman will host a media briefing on the Energy Department’s Fiscal Year 2014 Budget Request

  14. OpenEI Building Social Media Networks | OpenEI Community

    Open Energy Info (EERE)

    OpenEI Building Social Media Networks Home > Groups > OpenEI Community Central Graham7781's picture Submitted by Graham7781(2017) Super contributor 16 February, 2010 - 14:44...

  15. Reaching Social Media Goals on Facebook, Twitter | OpenEI Community

    Open Energy Info (EERE)

    Reaching Social Media Goals on Facebook, Twitter Home > Groups > OpenEI Community Central Graham7781's picture Submitted by Graham7781(2017) Super contributor 4 March, 2010 - 14:44...

  16. Degradation of CYANEX 301 in Contact with Nitric Acid Media

    SciTech Connect (OSTI)

    Philippe Marc; Radu Custelcean; Gary S. Groenewold; John R. Klaehn; Dean R. Peterman; Laetitia H. Delmau

    2012-10-01

    The nature of the degradation product obtained upon contacting CYANEX 301 (bis(2,4,4-trimethylpentyl)dithiophosphinic acid) with nitric acid has been elucidated and found to be a disulfide derivative. The first step to the degradation of CYANEX 301 in toluene has been studied using 31P{1H} NMR after being contacted with nitric acid media. The spectrum of the degradation product exhibits a complex multiplet around dP = 80 ppm. A succession of purifications of CYANEX 301 has resulted in single crystals of the acidic form and the corresponding ammonium salt. Unlike the original CYANEX 301, which consists of a complex diastereomeric mixture displaying all possible combinations of chiral orientations at the 2-methyl positions, the purified crystals were shown by single-crystal X-ray diffraction to be racemates, containing 50:50 mixtures of the [R;R] and [S;S] diastereomers. The comparison between the 31P {1H} NMR spectra of the degradation products resulting from the diastereomerically pure CYANEX 301 and the original diastereomeric mixture has elucidated the influence of the isomeric composition on the multiplicity of the 31P {1H} NMR peak. These NMR data indicate the initial degradation leads to a disulfide-bridged condensation product displaying multiple resonances due to phosphorusphosphorus coupling, which is caused by the inequivalence of the two P atoms as a result of their different chirality. A total of nine different NMR resonances, six of which display phosphorusphosphorus coupling, could be assigned, and the identity of the peaks corresponding to phosphorus atoms coupled to each other was confirmed by 31P {1H} homodecoupled NMR analysis.

  17. Integrated Energy Systems Multi-Media Webcast: Three CHP Sites Yield

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Important Lessons Learned, September 2005 | Department of Energy Multi-Media Webcast: Three CHP Sites Yield Important Lessons Learned, September 2005 Integrated Energy Systems Multi-Media Webcast: Three CHP Sites Yield Important Lessons Learned, September 2005 Cooling, Heating and Power (CHP) system integration is advancing. The U.S. Department of Energy partnered with industry to accelerate CHP system integration. This is an announcement for a webcast that provided detailed information on

  18. Media Promotes SEP Certification and DOE eGuide to Help Facilities Reduce

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Use and Costs | Department of Energy Media Promotes SEP Certification and DOE eGuide to Help Facilities Reduce Energy Use and Costs Media Promotes SEP Certification and DOE eGuide to Help Facilities Reduce Energy Use and Costs September 29, 2014 - 4:31pm Addthis Chemical Engineering Progress, a print publication of the American Institute of Chemical Engineers, described the benefits of managing energy with ISO 50001 and Superior Energy Performance (SEP) in its September 2014 edition.

  19. A new technique to measure tunneling barrier height in solid media

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect A new technique to measure tunneling barrier height in solid media Citation Details In-Document Search Title: A new technique to measure tunneling barrier height in solid media Authors: Mason, Thomas A [1] ; Dattelbaum, Andrew M [1] ; Mara, Nathan A [1] ; Kaschner, George C [1] ; Johnson, Oliver K [2] ; Seegmiller, Daniel [2] ; Fullwood, David T [2] + Show Author Affiliations Los Alamos National Laboratory BYU Publication Date: 2011-05-24 OSTI Identifier:

  20. Architecture for removable media USB-ARM (Patent) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Patent: Architecture for removable media USB-ARM Citation Details In-Document Search Title: Architecture for removable media USB-ARM A storage device is coupled to a computing system comprising an operating system and application software. Access to the storage device is blocked by a kernel filter driver, except exclusive access is granted to a first anti-virus engine. The first anti-virus engine is directed to scan the storage device for malicious software and report results. Exclusive access

  1. Gain media edge treatment to suppress amplified spontaneous emission in a high power laser

    DOE Patents [OSTI]

    Hackel, Lloyd A.; Soules, Thomas F.; Fochs, Scott N.; Rotter, Mark D.; Letts, Stephan A.

    2008-12-09

    A novel method and apparatus for suppressing ASE and parasitic oscillation modes in a high average power laser is introduced. By roughening one or more peripheral edges of a solid-state crystal or ceramic laser gain media and by bonding such edges using a substantially high index bonding elastomer or epoxy to a predetermined electromagnetic absorbing arranged adjacent to the entire outer surface of the peripheral edges of the roughened laser gain media, ASE and parasitic oscillation modes can be effectively suppressed.

  2. Gain media edge treatment to suppress amplified spontaneous emission in a high power laser

    DOE Patents [OSTI]

    Hackel, Lloyd A.; Soules, Thomas F.; Fochs, Scott N.; Rotter, Mark D.; Letts, Stephan A.

    2011-02-22

    A novel method and apparatus for suppressing ASE and/or parasitic oscillation modes in a laser is introduced. By roughening one or more peripheral edges of a solid-state crystal or ceramic laser gain media and by bonding such edges to a predetermined electromagnetic absorbing material arranged adjacent to the entire outer surface of the peripheral edges of the roughened laser gain media, ASE, parasitic oscillation modes and/or residual pump energy can be effectively suppressed.

  3. CO{sub 2} emissions from developing countries: Better understanding the role of Energy in the long term. Volume 2, Argentina, Brazil, Mexico, and Venezuela

    SciTech Connect (OSTI)

    Ketoff, A.; Sathaye, J.; Goldman, N.

    1991-07-01

    Recent years have witnessed a growing recognition of the link between emissions of carbon dioxide (CO{sub 2}) and changes in the global climate. Of all anthropogenic activities, energy production and use generate the single largest portion of these greenhouse gases. Although developing countries currently account for a small share of global carbon emissions, their contribution is increasing rapidly. Due to the rapid expansion of energy demand in these nations, the developing world`s share in global modern energy use rose from 16 to 27 percent between 1970 and 1990. If the growth rates observed over the past 20 years persist energy demand in developing will surpass that in the countries of the Organization for Economic Cooperation and Development (OECD) early in the 21st century. The study seeks to examine the forces that galvanize the growth of energy use and carbon emissions, to assess the likely future levels of energy and CO{sub 2} in selected developing nations and to identify opportunities for restraining this growth. The purpose of this report is to provide the quantitative information needed to develop effective policy options, not to identify the options themselves. These individual studies were conducted fro Argentina, Brazil, Mexico and Venezuela in Latin America.

  4. Designer synthetic media for studying microbial-catalyzed biofuel production

    SciTech Connect (OSTI)

    Tang, Xiaoyu [Biogas Inst. of Ministry of Agriculture, Chengdu (China); da Costa Sousa, Leonardo [Michigan State Univ., East Lansing, MI (United States); Jin, Mingjie [Michigan State Univ., East Lansing, MI (United States); Chundawat, Shishir [Michigan State Univ., East Lansing, MI (United States); State Univ. of New Jersey, Piscataway, NJ (United States); Chambliss, Charles [Baylor Univ., Waco, TX (United States); Lau, Ming W [Michigan State Univ., East Lansing, MI (United States); Xiao, Zeyi [Sichuan Univ., Chengdu (China); Dale, Bruce E [Michigan State Univ., East Lansing, MI (United States); Balan, Venkatesh [Michigan State Univ., East Lansing, MI (United States)

    2015-01-01

    Background: The fermentation inhibition of yeast or bacteria by lignocellulose-derived degradation products, during hexose/pentose co-fermentation, is a major bottleneck for cost-effective lignocellulosic biorefineries. To engineer microbial strains for improved performance, it is critical to understand the mechanisms of inhibition that affect fermentative organisms in the presence of major components of a lignocellulosic hydrolysate. The development of a synthetic lignocellulosic hydrolysate (SH) media with a composition similar to the actual biomass hydrolysate will be an important advancement to facilitate these studies. In this work, we characterized the nutrients and plant-derived decomposition products present in AFEX pretreated corn stover hydrolysate (ACH). The SH was formulated based on the ACH composition and was further used to evaluate the inhibitory effects of various families of decomposition products during Saccharomyces cerevisiae 424A (LNH-ST) fermentation. Results: The ACH contained high levels of nitrogenous compounds, notably amides, pyrazines, and imidazoles. In contrast, a relatively low content of furans and aromatic and aliphatic acids were found in the ACH. Though most of the families of decomposition products were inhibitory to xylose fermentation, due to their abundance, the nitrogenous compounds showed the most inhibition. From these compounds, amides (products of the ammonolysis reaction) contributed the most to the reduction of the fermentation performance. However, this result is associated to a concentration effect, as the corresponding carboxylic acids (products of hydrolysis) promoted greater inhibition when present at the same molar concentration as the amides. Due to its complexity, the formulated SH did not perfectly match the fermentation profile of the actual hydrolysate, especially the growth curve. However, the SH formulation was effective for studying the inhibitory effect of various compounds on yeast fermentation. Conclusions: The formulation of SHs is an important advancement for future multi-omics studies and for better understanding the mechanisms of fermentation inhibition in lignocellulosic hydrolysates. The SH formulated in this work was instrumental for defining the most important inhibitors in the ACH. Major AFEX decomposition products are less inhibitory to yeast fermentation than the products of dilute acid or steam explosion pretreatments; thus, ACH is readily fermentable by yeast without any detoxification.

  5. Designer synthetic media for studying microbial-catalyzed biofuel production

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tang, Xiaoyu; da Costa Sousa, Leonardo; Jin, Mingjie; Chundawat, Shishir; Chambliss, Charles; Lau, Ming W; Xiao, Zeyi; Dale, Bruce E; Balan, Venkatesh

    2015-01-01

    Background: The fermentation inhibition of yeast or bacteria by lignocellulose-derived degradation products, during hexose/pentose co-fermentation, is a major bottleneck for cost-effective lignocellulosic biorefineries. To engineer microbial strains for improved performance, it is critical to understand the mechanisms of inhibition that affect fermentative organisms in the presence of major components of a lignocellulosic hydrolysate. The development of a synthetic lignocellulosic hydrolysate (SH) media with a composition similar to the actual biomass hydrolysate will be an important advancement to facilitate these studies. In this work, we characterized the nutrients and plant-derived decomposition products present in AFEX™ pretreated corn stover hydrolysate (ACH). Themore » SH was formulated based on the ACH composition and was further used to evaluate the inhibitory effects of various families of decomposition products during Saccharomyces cerevisiae 424A (LNH-ST) fermentation. Results: The ACH contained high levels of nitrogenous compounds, notably amides, pyrazines, and imidazoles. In contrast, a relatively low content of furans and aromatic and aliphatic acids were found in the ACH. Though most of the families of decomposition products were inhibitory to xylose fermentation, due to their abundance, the nitrogenous compounds showed the most inhibition. From these compounds, amides (products of the ammonolysis reaction) contributed the most to the reduction of the fermentation performance. However, this result is associated to a concentration effect, as the corresponding carboxylic acids (products of hydrolysis) promoted greater inhibition when present at the same molar concentration as the amides. Due to its complexity, the formulated SH did not perfectly match the fermentation profile of the actual hydrolysate, especially the growth curve. However, the SH formulation was effective for studying the inhibitory effect of various compounds on yeast fermentation. Conclusions: The formulation of SHs is an important advancement for future multi-omics studies and for better understanding the mechanisms of fermentation inhibition in lignocellulosic hydrolysates. The SH formulated in this work was instrumental for defining the most important inhibitors in the ACH. Major AFEX decomposition products are less inhibitory to yeast fermentation than the products of dilute acid or steam explosion pretreatments; thus, ACH is readily fermentable by yeast without any detoxification.« less

  6. A numerical homogenization method for heterogeneous, anisotropic elastic media based on multiscale theory

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gao, Kai; Chung, Eric T.; Gibson, Richard L.; Fu, Shubin; Efendiev, Yalchin

    2015-06-05

    The development of reliable methods for upscaling fine scale models of elastic media has long been an important topic for rock physics and applied seismology. Several effective medium theories have been developed to provide elastic parameters for materials such as finely layered media or randomly oriented or aligned fractures. In such cases, the analytic solutions for upscaled properties can be used for accurate prediction of wave propagation. However, such theories cannot be applied directly to homogenize elastic media with more complex, arbitrary spatial heterogeneity. We therefore propose a numerical homogenization algorithm based on multiscale finite element methods for simulating elasticmore » wave propagation in heterogeneous, anisotropic elastic media. Specifically, our method used multiscale basis functions obtained from a local linear elasticity problem with appropriately defined boundary conditions. Homogenized, effective medium parameters were then computed using these basis functions, and the approach applied a numerical discretization that is similar to the rotated staggered-grid finite difference scheme. Comparisons of the results from our method and from conventional, analytical approaches for finely layered media showed that the homogenization reliably estimated elastic parameters for this simple geometry. Additional tests examined anisotropic models with arbitrary spatial heterogeneity where the average size of the heterogeneities ranged from several centimeters to several meters, and the ratio between the dominant wavelength and the average size of the arbitrary heterogeneities ranged from 10 to 100. Comparisons to finite-difference simulations proved that the numerical homogenization was equally accurate for these complex cases.« less

  7. Studies of Reaction Kinetics of Methane Hydrate Dissocation in Porous Media

    SciTech Connect (OSTI)

    Moridis, George J.; Seol, Yongkoo; Kneafsey, Timothy J.

    2005-03-10

    The objective of this study is the description of the kinetic dissociation of CH4-hydrates in porous media, and the determination of the corresponding kinetic parameters. Knowledge of the kinetic dissociation behavior of hydrates can play a critical role in the evaluation of gas production potential of gas hydrate accumulations in geologic media. We analyzed data from a sequence of tests of CH4-hydrate dissociation by means of thermal stimulation. These tests had been conducted on sand cores partially saturated with water, hydrate and CH4 gas, and contained in an x-ray-transparent aluminum pressure vessel. The pressure, volume of released gas, and temperature (at several locations within the cores) were measured. To avoid misinterpreting local changes as global processes, x-ray computed tomography scans provided accurate images of the location and movement of the reaction interface during the course of the experiments. Analysis of the data by means of inverse modeling (history matching ) provided estimates of the thermal properties and of the kinetic parameters of the hydration reaction in porous media. Comparison of the results from the hydrate-bearing porous media cores to those from pure CH4-hydrate samples provided a measure of the effect of the porous medium on the kinetic reaction. A tentative model of composite thermal conductivity of hydrate-bearing media was also developed.

  8. A numerical homogenization method for heterogeneous, anisotropic elastic media based on multiscale theory

    SciTech Connect (OSTI)

    Gao, Kai; Chung, Eric T.; Gibson, Richard L.; Fu, Shubin; Efendiev, Yalchin

    2015-06-05

    The development of reliable methods for upscaling fine scale models of elastic media has long been an important topic for rock physics and applied seismology. Several effective medium theories have been developed to provide elastic parameters for materials such as finely layered media or randomly oriented or aligned fractures. In such cases, the analytic solutions for upscaled properties can be used for accurate prediction of wave propagation. However, such theories cannot be applied directly to homogenize elastic media with more complex, arbitrary spatial heterogeneity. We therefore propose a numerical homogenization algorithm based on multiscale finite element methods for simulating elastic wave propagation in heterogeneous, anisotropic elastic media. Specifically, our method used multiscale basis functions obtained from a local linear elasticity problem with appropriately defined boundary conditions. Homogenized, effective medium parameters were then computed using these basis functions, and the approach applied a numerical discretization that is similar to the rotated staggered-grid finite difference scheme. Comparisons of the results from our method and from conventional, analytical approaches for finely layered media showed that the homogenization reliably estimated elastic parameters for this simple geometry. Additional tests examined anisotropic models with arbitrary spatial heterogeneity where the average size of the heterogeneities ranged from several centimeters to several meters, and the ratio between the dominant wavelength and the average size of the arbitrary heterogeneities ranged from 10 to 100. Comparisons to finite-difference simulations proved that the numerical homogenization was equally accurate for these complex cases.

  9. Social Media and the NRC: What We're Doing, Why We're Doing It, and

    Energy Savers [EERE]

    of Energy Social Media and Messages that Matter - Top Tips and Tools Social Media and Messages that Matter - Top Tips and Tools Better Buildings Residential Network Peer Exchange Call Series: Social Media and Messages that Matter - Top Tips and Tools, call slides and discussion summary. PDF icon Call Slides and Discussion Summary More Documents & Publications The Dog Days of Summer - Capitalizing on the Pet Market Hit the Road: Applying Lessons from National Campaigns to a Local Context

  10. Optical imaging through turbid media with a degenerate four-wave mixing correlation time gate

    DOE Patents [OSTI]

    Sappey, Andrew D.

    1998-04-14

    Optical imaging through turbid media is demonstrated using a degenerate four-wave mixing correlation time gate. An apparatus and method for detecting ballistic and/or snake light while rejecting unwanted diffusive light for imaging structures within highly scattering media are described. Degenerate four-wave mixing (DFWM) of a doubled YAG laser in rhodamine 590 is used to provide an ultrafast correlation time gate to discriminate against light that has undergone multiple scattering and therefore has lost memory of the structures within the scattering medium. Images have been obtained of a test cross-hair pattern through highly turbid suspensions of whole milk in water that are opaque to the naked eye, which demonstrates the utility of DFWM for imaging through turbid media. Use of DFWM as an ultrafast time gate for the detection of ballistic and/or snake light in optical mammography is discussed.

  11. Gas-Phase Diffusion in Porous Media: Comparison of Models Stephen W. Webb

    Office of Scientific and Technical Information (OSTI)

    Gas-Phase Diffusion in Porous Media: Comparison of Models Stephen W. Webb Sandia National Laboratories Albuquerque, New Mexico 87 185 ABSTRACT Two models are commonly used to analyze gas- phase diffusion in porous media in the presence of advection, the Advective-Dispersive Model (ADM) and the Dusty-gas Model (DGM). The ADM, which is used in TOUGH2, is based on a simple linear addition of advection calculated by Darcy's law and ordinary diffusion using Fick's law with a porosity- tortuosity-gas

  12. Mesoscopic modeling of multi-physicochemical transport phenomena in porous media

    SciTech Connect (OSTI)

    Kang, Qinjin; Wang, Moran; Mukherjee, Partha P; Lichtner, Peter C

    2009-01-01

    We present our recent progress on mesoscopic modeling of multi-physicochemical transport phenomena in porous media based on the lattice Boltzmann method. Simulation examples include injection of CO{sub 2} saturated brine into a limestone rock, two-phase behavior and flooding phenomena in polymer electrolyte fuel cells, and electroosmosis in homogeneously charged porous media. It is shown that the lattice Boltzmann method can account for multiple, coupled physicochemical processes in these systems and can shed some light on the underlying physics occuning at the fundamental scale. Therefore, it can be a potential powerful numerical tool to analyze multi-physicochemical processes in various energy, earth, and environmental systems.

  13. Asymptotic solution of light transport problems in optically thick luminescent media

    SciTech Connect (OSTI)

    ?ahin-Biryol, Derya Ilan, Boaz

    2014-06-15

    We study light transport in optically thick luminescent random media. Using radiative transport theory for luminescent media and applying asymptotic and computational methods, a corrected diffusion approximation is derived with the associated boundary conditions and boundary layer solution. The accuracy of this approach is verified for a plane-parallel slab problem. In particular, the reduced system models accurately the effect of reabsorption. The impacts of varying the Stokes shift and using experimentally measured luminescence data are explored in detail. The results of this study have application to the design of luminescent solar concentrators, fluorescence medical imaging, and optical cooling using anti-Stokes fluorescence.

  14. News Media Invited to Jefferson Lab's May 1 Open House | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab's May 1 Open House News Media Invited to Jefferson Lab's May 1 Open House What: The Jefferson Lab "Celebration of Science" Open House When: Saturday, May 1, 2010. News Media may visit any time between 9 a.m. and 4 p.m. Where: The Thomas Jefferson National Accelerator Facility, located at 12000 Jefferson Avenue, Newport News, Va. 23606 Enter at Hogan Drive from Jefferson Ave. Turn right at Hofstadter Road, show the Guard your press credentials and park where directed. Call

  15. Nucleation of AgInSbTe films employed in phase-change media (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Nucleation of AgInSbTe films employed in phase-change media Citation Details In-Document Search Title: Nucleation of AgInSbTe films employed in phase-change media In phase-change technology small volumes of a chalcogenide material are switched between amorphous and crystalline states by local heating with a short laser or current pulses. AgInSbTe is an alloy frequently used in optical data storage, which could also be applied in electronic data storage. For those

  16. Media Advisory Jefferson Lab Breaks Ground Sept. 1 for $73 Million

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technology & Engineering Facility | Jefferson Lab Jefferson Lab Breaks Ground Sept. 1 for $73 Million Technology &amp; Engineering Facility Media Advisory Jefferson Lab Breaks Ground Sept. 1 for $73 Million Technology & Engineering Facility Date: Wednesday, Sept. 1, 2010 Time: 9 - 10 a.m. News media representatives are asked to arrive no later than 8:45 a.m. to allow time to get in place for the event. Place: Jefferson Lab, 12000 Jefferson Avenue, Newport News, VA 23606 Event:

  17. Media invited to Jefferson Lab prior to April 21 'Science is Cool' Open

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    House and welcome day of event | Jefferson Lab 21 'Science is Cool' Open House and welcome day of event Media invited to Jefferson Lab prior to April 21 'Science is Cool' Open House and welcome day of event January 16, 2007 News media representatives wishing to visit the Department of Energy's Jefferson Lab in the weeks leading up to the April 21, 2007, Open House may contact Jefferson Lab Public Affairs Manager Linda Ware or Debbie Magaldi to schedule a visit. Allow at least one full

  18. Investigation of separation, treatment, and recycling options for hazardous paint blast media waste. Final report

    SciTech Connect (OSTI)

    Boy, J.H.; Race, T.D.; Reinbold, K.A.

    1996-02-01

    U.S. Army depot depaint operations generate over 4 million kg per year of contaminated paint blast media wastes. The objective of this work was to investigate technologies that might significantly mitigate this Army hazardous waste disposal problem. Most of the technologies investigated either failed to meet acceptable TCLP levels for hazardous metals content, or failed to meet Army disposal requirements. However, based on a review of several commercially available services, it is recommended that Army depot depaint operations consider processing hazardous blast media waste through properly regulated contractors that offer safe, effective, and economical stabilization, fixation, and recycling technologies.

  19. Coupling radiative heat transfer in participating media with other heat transfer modes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tencer, John; Howell, John R.

    2015-09-28

    The common methods for finding the local radiative flux divergence in participating media through solution of the radiative transfer equation are outlined. The pros and cons of each method are discussed in terms of their speed, ability to handle spectral properties and scattering phenomena, as well as their accuracy in different ranges of media transport properties. The suitability of each method for inclusion in the energy equation to efficiently solve multi-mode thermal transfer problems is discussed. Lastly, remaining topics needing research are outlined.

  20. Presented at the U.S. Embassy in Tokyo, Media Roundtable | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration U.S. Embassy in Tokyo, Media Roundtable October 27, 2009 Presented at the U.S. Embassy in Tokyo, Media RoundtablePresented by Thomas D'Agostino, Administrator, NNSA Good Morning. Thank you for joining us today. I'm pleased to be here in Japan to take part in an important international meeting on strengthening nuclear safeguards. When Secretary Chu addressed the IAEA General Conference last month, he highlighted our government's commitment to promoting peaceful uses of

  1. New Innovations in Highly Ion Specific Media for Recalcitrant Waste stream Radioisotopes

    SciTech Connect (OSTI)

    Denton, M. S.; Wilson, J.; Ahrendt, M. [RWE NUKEM Corporation (RNC), 800 Oak Ridge Tnpk., Suite A701, Oak Ridge, TN 37830 (United States); Bostick, W. D. [Materials and Chemistry Laboratory (MCL), Inc., East Tennessee Technology Park, Building K-1006, 2010 Highway 58, Suite 1000, Oak Ridge, TN 37830 (United States); DeSilva, F.; Meyers, P. [ResinTech, Inc., 1 ResinTech Plaza, 160 Cooper Road, West Berlin, NJ 08091 (United States)

    2006-07-01

    Specialty ion specific media were examined and developed for, not only pre- and post-outage waste streams, but also for very difficult outage waste streams. This work was carried out on first surrogate waste streams, then laboratory samples of actual waste streams, and, finally, actual on-site waste streams. This study was particularly focused on PWR wastewaters such as Floor Drain Tank (FDT), Boron Waste Storage Tank (BWST), and Waste Treatment Tank (WTT, or discharge tank). Over the last half decade, or so, treatment technologies have so greatly improved and discharge levels have become so low, that certain particularly problematic isotopes, recalcitrant to current treatment skids, are all that remain prior to discharge. In reality, they have always been present, but overshadowed by the more prevalent and higher activity isotopes. Such recalcitrants include cobalt, especially Co 58 [both ionic/soluble (total dissolved solids, TDS) and colloidal (total suspended solids, TSS)] and antimony (Sb). The former is present in most FDT and BWST wastewaters, while the Sb is primarily present in BWST waste streams. The reasons Co 58 can be elusive to granulated activated carbon (GAC), ultrafiltration (UF) and ion exchange (IX) demineralizers is that it forms submicron colloids as well as has a tendency to form metal complexes with chelating agents (e.g., ethylene diamine tetraacetic acid, or EDTA). Such colloids and non-charged complexes will pass through the entire treatment skid. Antimony (Sb) on the other hand, has little or no ionic charge, and will, likewise, pass through both the filtration and de-min skids into the discharge tanks. While the latter will sometimes (the anionic vs. the cationic or neutral species) be removed on the anion bed(s), it will slough off (snow-plow effect) when a higher affinity anion (iodine slugs, etc.) comes along; thus causing effluents not meeting discharge criteria. The answer to these problems found in this study, during an actual Nuclear Power Plant (NPP) outage cycle and recovery (four months), was the down-select and development of a number of highly ion specific media for the specific removal of such elusive isotopes. Over three dozen media including standard cation and anion ion exchangers, specialty IX, standard carbons, and, finally, chemically doped media (e.g., carbon and alumina substrates). The latter involved doping with iron, manganese, and even metals. The media down-select was carried out on actual plant waste streams so that all possible outage affects were accounted for, and distribution coefficients (Kd's) were determined (vs. decontamination factors, DF's, or percent removals). Such Kd's, in milliliters of solution per gram of media (mug), produce data indicative of the longevity of the media in that particular waste stream. Herein, the down-select is reported in Pareto (decreasing order) tables. Further affects such as the presence of high cobalt concentrations, high boron concentrations, the presence of hydrazine and chelating agents, and extreme pH conditions. Of particular importance here is to avoid the affinity of competing ions (e.g., a Sb specific media having more than a slight affinity for Co). The latter results in the snow-plow effect of sloughing off 3 to 4 times the cobalt into the effluent as was in the feed upon picking up the Sb. The study was quite successful and resulted in the development of and selection of a resin-type and two granular media for antimony removal, and two resin-types and a granular media for cobalt removal. The decontamination factors for both media were hundreds to thousands of times that of the full filtration and de-min. (authors)

  2. Oil country tubular goods from Argentina, Austria, Italy, Japan, Korea, Mexico, and Spain. Investigations Nos. 701-ta-363 and 364 (final) and investigations nos. 731-ta-711-717 (final)

    SciTech Connect (OSTI)

    1995-08-01

    Based on the record in these final investigations, we determine that an industry in the United States is materially injured by reason of imports of oil country tubular goods excluding drill pipe (also referred to herein as `casing and tubing`) from Argentina, Italy, Japan, Korea, and Mexico that are sold in the United States is materially injured by (`LTFV`). We also determine that an industry in the United States is materially injured by reason of subsidized imports of casing and tubing from Italy. We find that an industry in the United States is not materially injured or threatened with material injury by reason of imports of casing and tubing from Austria and Spain that are sold at LTFV or subsidized. We further determine that an industry in the United States is threatened with material injury by reason of imports of drill pipe from Argentina, Japan, and Mexico that are sold at LTFV. We determine that we would not have made an affirmative material injury determination but for the suspension of liquidation. Finally, we unanimously determine that an industry in the United States is neither materially injured nor threatened with material injury by reason of LFTV or subsidized imports of drill pipe from Austria, Italy, Korea, or Spain.

  3. Expert Meeting Report: Transforming Existing Buildings through New Media--An Idea Exchange

    SciTech Connect (OSTI)

    Hunt, S.

    2012-05-01

    This report describes results of a Building America expert meeting on September 13, 2011, in Las Vegas, Nevada, hosted by the Building America Retrofit Alliance (BARA). This meeting provided a forum for presentations and discussions on the use of new media to work with remodelers and retrofit projects to improve energy efficiency and deliver research results from the Building America program to remodelers.

  4. Dynamic Column Extraction for Europium on Media #1 at Ambient Temperature

    SciTech Connect (OSTI)

    Gary Garland

    2015-04-07

    This is a dataset for a 200ppm europium solution sent through a column with 12g of media #1 at pH of 3.2. This column experiment was run at ambient temperature at a flow rate of 2mL/min.

  5. Bio-composite Nonwoven Media Based on Chitosan and Empty Fruit Bunches for Wastewater Application

    SciTech Connect (OSTI)

    Sadikin, Aziatul Niza; Nawawi, Mohd Ghazali Mohd; Othman, Norasikin

    2011-01-17

    Fibrous filter media in the form of non-woven filters have been used extensively in water treatment as pre-filters or to support the medium that does the separation. Lignocellulosic such as empty fruit bunches have potential to be used as a low cost filter media as they represent unused resources, widely available and are environmentally friendly. Laboratory filtration tests were performed to investigate the potential application of empty fruit bunches that enriched with chitosan as a fiber filter media to remove suspended solids, oil and grease, and organics in terms of chemical oxygen demand from palm oil mill effluent. The present paper studies the effect of chitosan concentration on the filter media performance. Bench-scaled experiment results indicated that pre-treatment using the fiber filtration system removed up to 67.3% of total suspended solid, 65.1% of oil and grease and 46.1% of chemical oxygen demand. The results show that the lignocellulosic fiber filter could be a potential technology for primary wastewater treatment.

  6. Clearing, Sanitization, and Destruction of Information System Storage Media, Memory Devices, and Related Hardware Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-06-21

    The manual establishes the DOE requirements and responsibilities for clearing, sanitizing, and destroying DOE information system storage media, memory devices, and related hardware to ensure that no unauthorized information can be retrieved. Canceled by DOE N 205.17. Cancels DOE N 205.12

  7. Expert Meeting Report: Transforming Existing Buildings through New Media - An Idea Exchange

    SciTech Connect (OSTI)

    Hunt, Stacy

    2012-05-01

    This report describes results of a Building America expert meeting on September 13, 2011, in Las Vegas, Nevada, hosted by the Building America Retrofit Alliance (BARA). This meeting provided a forum for presentations and discussions on the use of new media to work with remodelers and retrofit projects to improve energy efficiency and deliver research results from the Building America program to remodelers.

  8. Use of Social Media to Target Information-Driven Arms Control and Nonproliferation Verification

    SciTech Connect (OSTI)

    Kreyling, Sean J.; Williams, Laura S.; Gastelum, Zoe N.; Whattam, Kevin M.; Corley, Courtney D.; Cramer, Nicholas O.; Rose, Stuart J.; Bell, Eric B.; Gregory, Michelle L.

    2012-07-19

    There has been considerable discussion within the national security community, including a recent workshop sponsored by the U.S. State Department, about the use of social media for extracting patterns of collective behavior and influencing public perception in areas relevant to arms control and nonproliferation. This paper seeks to explore if, and how, social media can be used to supplement nonproliferation and arms control inspection and monitoring activities on states and sites of greatest proliferation relevance. In this paper, we set the stage for how social media can be applied in this problem space and describe some of the foreseen challenges, including data validation, sources and attributes, verification, and security. Using information analytics and data visualization capabilities available at Pacific Northwest National Laboratory (PNNL), we provide graphical examples of some social media "signatures" of potential relevance for nonproliferation and arms control purposes. We conclude by describing a proposed case study and offering recommendations both for further research and next steps by the policy community.

  9. National Electrical Manufacturers Association (NEMA) Vids for Grids. New Media for the New Energy Workforce

    SciTech Connect (OSTI)

    Eckhart, Gene

    2012-02-29

    The objective of this program was to use a new media videos posted on YouTube to augment education about the emerging Smart Grid. All of the specific tasks have been completed per plan, with twelve videos and three podcasts posted on YouTube on the NEMA Vids4Grids channel.

  10. Characteristic evaluation of cooling technique using liquid nitrogen and metal porous media

    SciTech Connect (OSTI)

    Tanno, Yusuke; Ito, Satoshi; Hashizume, Hidetoshi

    2014-01-29

    A remountable high-temperature superconducting magnet, whose segments can be mounted and demounted repeatedly, has been proposed for construction and maintenance of superconducting magnet and inner reactor components of a fusion reactor. One of the issues in this design is that the performance of the magnet deteriorates by a local temperature rise due to Joule heating in jointing regions. In order to prevent local temperature rise, a cooling system using a cryogenic coolant and metal porous media was proposed and experimental studies have been carried out using liquid nitrogen. In this study, flow and heat transfer characteristics of cooling system using subcooled liquid nitrogen and bronze particle sintered porous media are evaluated through experiments in which the inlet degree of subcooling and flow rate of the liquid nitrogen. The flow characteristics without heat input were coincided with Erguns equation expressing single-phase flow in porous materials. The obtained boiling curve was categorized into three conditions; convection region, nucleate boiling region and mixed region with nucleate and film boiling. Wall superheat did not increase drastically with porous media after departure from nucleate boiling point, which is different from a situation of usual boiling curve in a smooth tube. The fact is important characteristic to cooling superconducting magnet to avoid its quench. Heat transfer coefficient with bronze particle sintered porous media was at least twice larger than that without the porous media. It was also indicated qualitatively that departure from nucleate boiling point and heat transfer coefficient depends on degree of subcooling and mass flow rate. The quantitative evaluation of them and further discussion for the cooling system will be performed as future tasks.

  11. Three-Dimensional Imaging and Quantification of Biomass and Biofilms in Porous Media

    SciTech Connect (OSTI)

    Dorthe Wildenschild

    2012-10-10

    A new method to resolve biofilms in three dimensions in porous media using high-resolution synchrotron-based x-ray computed microtomography (CMT) has been developed. Imaging biofilms in porous media without disturbing the natural spatial arrangement of the porous media and associated biofilm has been a challenging task, primarily because porous media generally precludes conventional imaging via optical microscopy; x-ray tomography offers a potential alternative. One challenge for using this method is that most conventional x-ray contrast agents are water-soluble and easily diffuse into biofilms. To overcome this problem, silver-coated microspheres were added to the fluid phase to create an x-ray contrast that does not diffuse into the biofilm mass. Using this approach, biofilm imaging in porous media was accomplished with sufficient contrast to differentiate between the biomass- and fluid-filled pore spaces. The method was validated by using a two-dimensional micro-model flow cell where both light microscopy and CMT imaging were used to im age the biofilm. The results of this work has been published in Water Resources Research (Iltis et al., 2010). Additional work needs to be done to optimize this imaging approach, specifically, we find that the quality of the images are highly dependent on the coverage of the biofilm with Ag particles, - which means that we may have issues in dead-end pore space and for very low density (fluffy) biofilms. What we can image for certain with this technique is the biofilm surface that is well-connected to flow paths and thus well-supplied with nutrients etc.

  12. Secondary Pollutants from Ozone Reaction with Ventilation Filters and Degradation of Filter Media Additives

    SciTech Connect (OSTI)

    Destaillats, Hugo; Chen, Wenhao; Apte, Michael; Li, Nuan; Spears, Michael; Almosni, Jrmie; Brunner, Gregory; Zhang, Jianshun; Fisk, William J.

    2011-05-01

    Prior research suggests that chemical processes taking place on the surface of particle filters employed in buildings may lead to the formation of harmful secondary byproducts. We investigated ozone reactions with fiberglass, polyester, cotton/polyester and polyolefin filter media, as well as hydrolysis of filter media additives. Studies were carried out on unused media, and on filters that were installed for 3 months in buildings at two different locations in the San Francisco Bay Area. Specimens from each filter media were exposed to {approx}150 ppbv ozone in a flow tube under a constant flow of dry or humidified air (50percent RH). Ozone breakthrough was recorded for each sample over periods of {approx}1000 min; the ozone uptake rate was calculated for an initial transient period and for steady-state conditions. While ozone uptake was observed in all cases, we did not observe significant differences in the uptake rate and capacity for the various types of filter media tested. Most experiments were performed at an airflow rate of 1.3 L/min (face velocity = 0.013 m/s), and a few tests were also run at higher rates (8 to 10 L/min). Formaldehyde and acetaldehyde, two oxidation byproducts, were quantified downstream of each sample. Those aldehydes (m/z 31 and 45) and other volatile byproducts (m/z 57, 59, 61 and 101) were also detected in real-time using Proton-Transfer Reaction - Mass Spectrometry (PTR-MS). Low-ppbv byproduct emissions were consistently higher under humidified air than under dry conditions, and were higher when the filters were loaded with particles, as compared with unused filters. No significant differences were observed when ozone reacted over various types of filter media. Fiberglass filters heavily coated with impaction oil (tackifier) showed higher formaldehyde emissions than other samples. Those emissions were particularly high in the case of used filters, and were observed even in the absence of ozone, suggesting that hydrolysis of additives, rather than ozonolysis, is the main formaldehyde source in those filters. Emission rates of formaldehyde and acetaldehyde were not found to be large enough to substantially increase indoor concentrations in typical building scenarios. Nevertheless, ozone reactions on HVAC filters cannot be ignored as a source of low levels of indoor irritants.

  13. Feasibility of bit patterned media for HAMR at 5 Tb/in{sup 2}

    SciTech Connect (OSTI)

    Wang, Sumei Ghoreyshi, Ali; Victora, R. H.

    2015-05-07

    We have investigated the feasibility of BPM for HAMR via Finite Difference Time Domain and atomistic simulation and we have substantiated the feasibility of 5 Tb/in{sup 2} with two filling factors 25% and 56% even when the maximum on-track bit temperature is below the Curie temperature. The success of this underheated switching is attributed to sufficiently low anisotropy instead of reduction of Curie temperature. The temperature gradient in the cross-track direction is almost doubled if the optical head width is reduced by half, indicating the possibility of higher areal densities. Moreover, contrary to continuous media, we also found that the power absorption peaks at the bottom of the bit patterned FePt when the media is illuminated from above, which is probably due to stronger coupling there between FePt and the surrounding materials.

  14. Diffusion Dominant Solute Transport Modelling in Fractured Media Under Deep Geological Environment - 12211

    SciTech Connect (OSTI)

    Kwong, S.; Jivkov, A.P.

    2012-07-01

    Deep geologic disposal of high activity and long-lived radioactive waste is gaining increasing support in many countries, where suitable low permeability geological formation in combination with engineered barriers are used to provide long term waste contaminant and minimise the impacts to the environment and risk to the biosphere. This modelling study examines the solute transport in fractured media under low flow velocities that are relevant to a deep geological environment. In particular, reactive solute transport through fractured media is studied using a 2-D model, that considers advection and diffusion, to explore the coupled effects of kinetic and equilibrium chemical processes. The effects of water velocity in the fracture, matrix porosity and diffusion on solute transport are investigated and discussed. Some illustrative modelled results are presented to demonstrate the use of the model to examine the effects of media degradation on solute transport, under the influences of hydrogeological (diffusion dominant) and microbially mediated chemical processes. The challenges facing the prediction of long term degradation such as cracks evolution, interaction and coalescence are highlighted. The potential of a novel microstructure informed modelling approach to account for these effects is discussed, particularly with respect to investigating multiple phenomena impact on material performance. The GRM code is used to examine the effects of media degradation for a geological waste disposal package, under the combined hydrogeological (diffusion dominant) and chemical effects in low groundwater flow conditions that are typical of deep geological disposal systems. An illustrative reactive transport modelling application demonstrates the use of the code to examine the interplay of kinetic controlled biogeochemical reactive processes with advective and diffusive transport, under the influence of media degradation. The initial model results are encouraging which show the disposal system to evolve in a physically realistic manner. In the example presented the reactive-transport coupling develops chemically reducing zones, which limit the transport of uranium. This illustrates the potential significance of media degradation and chemical effect on the transport of radionuclides which would need to be taken into account when examining the long-term behaviour and containment properties of the geological disposal system. Microstructure-informed modelling and its potential linkage with continuum flow modelling is a subject of ongoing studies. The approach of microstructure-informed modelling is discussed to provide insight and a mechanistic understanding of macroscopic parameters and their evolution. The proposed theoretical and methodological basis for microstructure-informed modelling of porous quasi-brittle media has the potential to develop into an explanatory and predictive tool for deriving mechanism-based, as opposed to phenomenological, evolution laws for macroscopic properties. These concepts in micro-scale modelling are likely to be applicable to the diffusion process, in addition to advective transport illustrated here for porous media. (authors)

  15. Stimulated Raman scattering of laser dye mixtures dissolved in multiple scattering media

    SciTech Connect (OSTI)

    Yashchuk, V P; Komyshan, A O; Tikhonov, E A; Olkhovyk, L A

    2014-10-31

    Stimulated Raman scattering (SRS) of a mixture of rhodamine 6G and pyrromethene 605 laser dyes in vesicular films is studied. It is shown that a peculiar interaction of dyes occurs under conditions of multiple scattering of light from vesicles. This interaction manifests itself as SRS excitation of one of the dyes by random lasing of the other dye, provided that the random lasing spectrum overlaps the Stokes lines of the first dye. In addition, there is energy transfer between molecules of these dyes if their luminescence and absorption spectra overlap. The results obtained confirm that the mechanism of SRS from laser dyes in multiple scattering media is similar to that in coherent-active Raman spectroscopy. These results extend the possibility of determining the vibrational spectrum of dye molecules from their secondary radiation in these media. (nonlinear optical phenomena)

  16. Two-phase mixed media dielectric with macro dielectric beads for enhancing resistivity and breakdown strength

    SciTech Connect (OSTI)

    Falabella, Steven; Meyer, Glenn A; Tang, Vincent; Guethlein, Gary

    2014-06-10

    A two-phase mixed media insulator having a dielectric fluid filling the interstices between macro-sized dielectric beads packed into a confined volume, so that the packed dielectric beads inhibit electro-hydrodynamically driven current flows of the dielectric liquid and thereby increase the resistivity and breakdown strength of the two-phase insulator over the dielectric liquid alone. In addition, an electrical apparatus incorporates the two-phase mixed media insulator to insulate between electrical components of different electrical potentials. And a method of electrically insulating between electrical components of different electrical potentials fills a confined volume between the electrical components with the two-phase dielectric composite, so that the macro dielectric beads are packed in the confined volume and interstices formed between the macro dielectric beads are filled with the dielectric liquid.

  17. Hazardous waste site inspectors and operators: Their perceptions of the media and environmental groups

    SciTech Connect (OSTI)

    Graber, D.R.; Musham, C.

    1995-12-01

    This study assesses and compares the views and opinions of two groups (representing the `regulators` and the `regulated`) in one area of environmental management - the operation of commercial hazardous waste sites. A survey, sent to 141 managers of commercial treatment, storage, and disposal sites and 110 hazardous waste inspectors. This paper reports on their views of the role and influence of the media. In addition, the expectations for hazardous waste management by several stakeholder groups was examined.

  18. SAVANNAH RIVER OPERATIONS OFFICE AIKEN, SC 29802 NEWS MEDIA CONTACT FOR IMMEDIATE RELEASE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AIKEN, SC 29802 NEWS MEDIA CONTACT FOR IMMEDIATE RELEASE Julie Petersen, (803) 952-7690 May 21, 2012 julie.petersen@srs.gov INSTALLATION OF SIX LARGE PROCESSING TANKS MARKS BIG STEP IN CONSTRUCTION OF CRITICAL WASTE CLEANUP FACILITY AT SRS Tank components received over the weekend successfully installed in SRS Salt Waste Processing Facility, key cleanup facility designed to treat legacy radioactive salt waste in support of DOE's tank closure priority AIKEN, S.C. - (May 21) Six major nuclear

  19. MEDIA ADVISORY: Secretary Chu to Lead Delegation to IAEA General Conference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Vienna, CSLF Ministerial in Beijing | Department of Energy ADVISORY: Secretary Chu to Lead Delegation to IAEA General Conference in Vienna, CSLF Ministerial in Beijing MEDIA ADVISORY: Secretary Chu to Lead Delegation to IAEA General Conference in Vienna, CSLF Ministerial in Beijing September 17, 2011 - 2:31pm Addthis Washington D.C. - Beginning Sunday, September 18, U.S. Energy Secretary Steven Chu will lead the American delegation at the International Atomic Energy Agency's 55th General

  20. News Media Invited to Teachers' Science Activities Night at Jefferson Lab |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab Teachers' Science Activities Night at Jefferson Lab News Media Invited to Teachers' Science Activities Night at Jefferson Lab What: Third Annual Region II Teacher Night When: Wednesday, April 21, 2010, from 6:30 to 8 p.m. Where: CEBAF Center at the Thomas Jefferson National Accelerator Facility, located at 12000 Jefferson Avenue, Newport News, Va. 23606 (Map and directions at: http://www.jlab.org/visitors/visiting/index.html ) Details: More than 100 elementary- and

  1. News Media invited to cover Feb. 12 Virginia Regional High School Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bowl at Jefferson Lab; 22 teams competing | Jefferson Lab Feb. 12 Virginia Regional High School Science Bowl at Jefferson Lab; 22 teams competing World Year of Physics News Media invited to cover Feb. 12 Virginia Regional High School Science Bowl at Jefferson Lab; 22 teams competing February 7, 2005 The Department of Energy's Jefferson Lab in Newport News, Va., is hosting this year's Virginia Regional High School Science Bowl on Saturday, Feb. 12. Twenty-two teams, representing high schools

  2. News Media invited to cover Virginia Regional Science Bowl with record 23

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High School teams competing | Jefferson Lab Virginia Regional Science Bowl with record 23 High School teams competing News Media invited to cover Virginia Regional Science Bowl with record 23 High School teams competing January 30, 2004 The Department of Energy's Thomas Jefferson National Accelerator Facility (Jefferson Lab) in Newport News, Va., is hosting this year's Virginia Regional Science Bowl on Saturday, Feb. 7. Twenty-three teams, representing high schools from across the state are

  3. Acronyms A AAAP Accelerated Access Authorization Program ACREM Accountable Removable Classified Media (outdated term)

    Energy Savers [EERE]

    Acrobat PDFMaker 5.0 Acrobat PDFMaker 5.0 PDF icon Acrobat PDFMaker 5.0 More Documents & Publications Misuse_Government_IT_CommunicationResources_Guidance.pdf Software Quality Assurance: DOE N 203.1 DOE O 200.1A

    v Acronyms A AAAP Accelerated Access Authorization Program ACREM Accountable Removable Classified Media (outdated term) APR Accountable Property Representative AU Associate Under Secretary for Environment, Health, Safety and Security AU1.2 Office of Corporate Security Strategy,

  4. Flow Intermittency, Dispersion, and Correlated Continuous Time Random Walks in Porous Media

    SciTech Connect (OSTI)

    de Anna, Pietro; Le Borgne, Tanguy; Dentz, Marco; Tartakovsky, Alexandre M.; Bolster, Diogo; Davy, Philippe

    2013-05-01

    We study the intermittency of fluid velocities in porous media and its relation to anomalous dispersion. Lagrangian velocities measured at equidistant points along streamlines are shown to form a spatial Markov process. As a consequence of this remarkable property, the dispersion of fluid particles can be described by a continuous time random walk with correlated temporal increments. This new dynamical picture of intermittency provides a direct link between the microscale flow, its intermittent properties, and non-Fickian dispersion.

  5. Pore-scale dynamics of salt transport and distribution in drying porous media

    SciTech Connect (OSTI)

    Shokri, Nima

    2014-01-15

    Understanding the physics of water evaporation from saline porous media is important in many natural and engineering applications such as durability of building materials and preservation of monuments, water quality, and mineral-fluid interactions. We applied synchrotron x-ray micro-tomography to investigate the pore-scale dynamics of dissolved salt distribution in a three dimensional drying saline porous media using a cylindrical plastic column (15 mm in height and 8 mm in diameter) packed with sand particles saturated with CaI{sub 2} solution (5% concentration by mass) with a spatial and temporal resolution of 12 ?m and 30 min, respectively. Every time the drying sand column was set to be imaged, two different images were recorded using distinct synchrotron x-rays energies immediately above and below the K-edge value of Iodine. Taking the difference between pixel gray values enabled us to delineate the spatial and temporal distribution of CaI{sub 2} concentration at pore scale. Results indicate that during early stages of evaporation, air preferentially invades large pores at the surface while finer pores remain saturated and connected to the wet zone at bottom via capillary-induced liquid flow acting as evaporating spots. Consequently, the salt concentration increases preferentially in finer pores where evaporation occurs. Higher salt concentration was observed close to the evaporating surface indicating a convection-driven process. The obtained salt profiles were used to evaluate the numerical solution of the convection-diffusion equation (CDE). Results show that the macro-scale CDE could capture the overall trend of the measured salt profiles but fail to produce the exact slope of the profiles. Our results shed new insight on the physics of salt transport and its complex dynamics in drying porous media and establish synchrotron x-ray tomography as an effective tool to investigate the dynamics of salt transport in porous media at high spatial and temporal resolution.

  6. Considerations for developing models of multiphase flow in deformable porous media.

    SciTech Connect (OSTI)

    Martinez, Mario J.; Stone, Charles Michael

    2008-09-01

    This document summarizes research and planning for the development of a numerical simulation capability for nonisothermal multiphase, multicomponent transport in heterogeneous deformable porous materials. Particular attention is given to describing a mathematical formulation for flow in deformable media and for numerical techniques for dealing with phase transitions. A development plan is formulated to provide a computational capability motivated by current and future needs in geosystems management for energy security.

  7. Single- and two-phase flow in microfluidic porous media analogs based on Voronoi tessellation

    SciTech Connect (OSTI)

    Wu, Mengjie; Xiao, Feng; Johnson-Paben, Rebecca; Retterer, Scott T; Yin, Xiaolong; Neeves, Keith B

    2012-01-01

    The objective of this study was to create a microfluidic model of complex porous media for studying single and multiphase flows. Most experimental porous media models consist of periodic geometries that lend themselves to comparison with well-developed theoretical predictions. However, most real porous media such as geological formations and biological tissues contain a degree of randomness and complexity that is not adequately represented in periodic geometries. To design an experimental tool to study these complex geometries, we created microfluidic models of random homogeneous and heterogeneous networks based on Voronoi tessellations. These networks consisted of approximately 600 grains separated by a highly connected network of channels with an overall porosity of 0.11 0.20. We found that introducing heterogeneities in the form of large cavities within the network changed the permeability in a way that cannot be predicted by the classical porosity-permeability relationship known as the Kozeny equation. The values of permeability found in experiments were in excellent agreement with those calculated from three-dimensional lattice Boltzmann simulations. In two-phase flow experiments of oil displacement with water we found that the surface energy of channel walls determined the pattern of water invasion, while the network topology determined the residual oil saturation. These results suggest that complex network topologies lead to fluid flow behavior that is difficult to predict based solely on porosity. The microfluidic models developed in this study using a novel geometry generation algorithm based on Voronoi tessellation are a new experimental tool for studying fluid and solute transport problems within complex porous media.

  8. Clearing, Sanitizing, and Destroying Information System Storage Media, Memory Devices, and Other Related Hardware

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-02-19

    This Notice establishes Department of Energy policy requirements and responsibilities for clearing, sanitizing, and destroying DOE information system storage media, memory devices, and other related hardware to ensure no unauthorized information can be retrieved and provides instructions for the same. DOE N 205.15, dated 3-18-05, extends this directive until 3-18-06. No cancellations. Canceled by DOE M 205.1-2.

  9. WEST VALLEY DEVELOPMENT PROJECT WEST VALLEY, NEW YORK NEWS MEDIA CONTACT: FOR IMMEDIATE RELEASE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WEST VALLEY DEVELOPMENT PROJECT WEST VALLEY, NEW YORK NEWS MEDIA CONTACT: FOR IMMEDIATE RELEASE Bryan Bower: 716-942-4368 June 28, 2012 Bill Taylor: 803-952-8564 West Valley Draft Waste Evaluation West Valley, New York - The U.S. Department of Energy (DOE) today released to the Nuclear Regulatory Commission (NRC), the public and the states of Nevada and Texas, for review and comment, a Draft Waste Incidental to Reprocessing (WIR) Evaluation (Draft Evaluation) for the concentrator feed makeup

  10. Analysis of free surface momentum and energy transport in porous media

    SciTech Connect (OSTI)

    Chen, S.C.; Vafai, K.

    1996-02-23

    The phenomenological analysis of free surface transport through porous media is presented. A finite difference scheme using the Marker and Cell (MAC) method is employed to investigate the momentum and energy transport in a porous channel involving free surface transport phenomena. To the best of the authors` knowledge, this is the first investigation of free surface momentum and energy transport through porous media and is also the first application of the MAC method for exploring the free surface transport phenomena in a porous medium. Limiting case comparisons are made with an existing analytical solution for flow through a channel filled with a porous medium. Excellent agreement is obtained for both the temperature and velocity distributions. Temporal free surface positions are also compared and verified against an existing analytical solution. A detailed analysis of the encroachment of two immiscible fluids in a porous channel using Darcy`s model is presented. The effects of pressure differences and permeabilities on free surface transport through a porous medium are investigated. The effect of the free surface transport in porous media on the energy transfer is also explored.

  11. Solidification and loss of hydrostaticity in liquid media used for pressure measurements

    SciTech Connect (OSTI)

    Torikachvili, M. S.; Kim, S. K.; Colombier, E.; Bud’ko, S. L.; Canfield, P. C.

    2015-12-16

    We carried out a study of the pressure dependence of the solidification temperature in nine pressure transmitting media that are liquid at ambient temperature, under pressures up to 2.3 GPa. These fluids are 1:1 isopentane/n-pentane, 4:6 light mineral oil/n-pentane, 1:1 isoamyl alcohol/n-pentane, 4:1 methanol/ethanol, 1:1 FC72/FC84 (Fluorinert), Daphne 7373, isopentane, and Dow Corning PMX silicone oils 200 and 60,000 cS. We relied on the high sensitivity of the electrical resistivity of Ba(Fe1–xRux)2As2 single crystals to the freezing of the pressure media and cross-checked with corresponding anomalies observed in the resistance of the manganin coil that served as the ambient temperature resistive manometer. In addition to establishing the temperature-pressure line separating the liquid (hydrostatic) and frozen (non-hydrostatic) phases, these data permit rough estimates of the freezing pressure of these media at ambient temperature. As a result, this pressure establishes the extreme limit for the medium to be considered hydrostatic. For higher applied pressures, the medium has to be treated as non-hydrostatic.

  12. Characterization of highly scattering media by measurement of diffusely backscattered polarized light

    DOE Patents [OSTI]

    Hielscher, Andreas H.; Mourant, Judith R.; Bigio, Irving J.

    2000-01-01

    An apparatus and method for recording spatially dependent intensity patterns of polarized light that is diffusely backscattered from highly scattering media are described. These intensity patterns can be used to differentiate different turbid media, such as polystyrene-sphere and biological-cell suspensions. Polarized light from a He-Ne laser (.lambda.=543 nm) is focused onto the surface of the scattering medium, and a surface area of approximately 4.times.4 cm centered on the light input point is imaged through polarization analysis optics onto a CCD camera. A variety of intensity patterns may be observed by varying the polarization state of the incident laser light and changing the analyzer configuration to detect different polarization components of the backscattered light. Experimental results for polystyrene-sphere and Intralipid suspensions demonstrate that the radial and azimuthal variations of the observed pattern depend on the concentration, size, and anisotropy factor, g, of the particles constituting the scattering medium. Measurements performed on biological cell suspensions show that intensity patterns can be used to differentiate between suspensions of cancerous and non-cancerous cells. Introduction of the Mueller-matrix for diffusely backscattered light, permits the selection of a subset of measurements which comprehensively describes the optical properties of backscattering media.

  13. Solidification and loss of hydrostaticity in liquid media used for pressure measurements

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Torikachvili, M. S.; Kim, S. K.; Colombier, E.; Bud’ko, S. L.; Canfield, P. C.

    2015-12-16

    We carried out a study of the pressure dependence of the solidification temperature in nine pressure transmitting media that are liquid at ambient temperature, under pressures up to 2.3 GPa. These fluids are 1:1 isopentane/n-pentane, 4:6 light mineral oil/n-pentane, 1:1 isoamyl alcohol/n-pentane, 4:1 methanol/ethanol, 1:1 FC72/FC84 (Fluorinert), Daphne 7373, isopentane, and Dow Corning PMX silicone oils 200 and 60,000 cS. We relied on the high sensitivity of the electrical resistivity of Ba(Fe1–xRux)2As2 single crystals to the freezing of the pressure media and cross-checked with corresponding anomalies observed in the resistance of the manganin coil that served as the ambient temperaturemore » resistive manometer. In addition to establishing the temperature-pressure line separating the liquid (hydrostatic) and frozen (non-hydrostatic) phases, these data permit rough estimates of the freezing pressure of these media at ambient temperature. As a result, this pressure establishes the extreme limit for the medium to be considered hydrostatic. For higher applied pressures, the medium has to be treated as non-hydrostatic.« less

  14. Incineration of residue from paint stripping operations using plastic media blasting

    SciTech Connect (OSTI)

    Helt, J.E.; Mallya, N.

    1988-01-01

    A preliminary investigation has been performed on the environmental consequences of incinerating plastic-media-blasting (PMB) wastes from plant removal operations. PMB is similar to sandblasting although blasting taken place at a much lower pressure. The blasted media can be recovered and recycled several times, but ultimately a residue of paint dust/chips and attrited media dust are left for disposal. This residue is a dry solid that may potentially be classified as a hazardous waste. One possible alternative to depositing the waste residue directly into a hazardous waste landfill is incineration. Incineration would provide desirable volume reduction. However, the fate of heavy metals from the entrained paint waste is not known. Samples of PMB residue were combusted at temperatures between 690/degree/C and 815/degree/C with approximately 125% of the stoichiometric air. The ash remaining after combustion was then analyzed for heavy metal content and tested for leachability using the EPA toxicity characteristics leaching procedures (TCLP). 6 refs., 7 tabs.

  15. Waste Isolation Safety Assessment Program. Task 4. Third Contractor Information Meeting. [Adsorption-desorption on geological media

    SciTech Connect (OSTI)

    Not Available

    1980-06-01

    The study subject of this meeting was the adsorption and desorption of radionuclides on geologic media under repository conditions. This volume contans eight papers. Separate abstracts were prepared for all eight papers. (DLC)

  16. Identifying, Visualizing, and Fusing Social Media Data to Support Nonproliferation and Arms Control Treaty Verification: Preliminary Results

    SciTech Connect (OSTI)

    Gastelum, Zoe N.; Cramer, Nicholas O.; Benz, Jacob M.; Kreyling, Sean J.; Henry, Michael J.; Corley, Courtney D.; Whattam, Kevin M.

    2013-07-11

    While international nonproliferation and arms control verification capabilities have their foundations in physical and chemical sensors, state declarations, and on-site inspections, verification experts are beginning to consider the importance of open source data to complement and support traditional means of verification. One of those new, and increasingly expanding, sources of open source information is social media, which can be ingested and understood through social media analytics (SMA). Pacific Northwest National Laboratory (PNNL) is conducting research to further our ability to identify, visualize, and fuse social media data to support nonproliferation and arms control treaty verification efforts. This paper will describe our preliminary research to examine social media signatures of nonproliferation or arms control proxy events. We will describe the development of our preliminary nonproliferation and arms control proxy events, outline our initial findings, and propose ideas for future work.

  17. EXAMINING THE ROLE AND RESEARCH CHALLENGES OF SOCIAL MEDIA AS A TOOL FOR NONPROLIFERATION AND ARMS CONTROL TREATY VERIFICATION

    SciTech Connect (OSTI)

    Henry, Michael J.; Cramer, Nicholas O.; Benz, Jacob M.; Gastelum, Zoe N.; Kreyling, Sean J.; West, Curtis L.

    2014-05-13

    Traditional arms control treaty verification activities typically involve a combination of technical measurements via physical and chemical sensors, state declarations, political agreements, and on-site inspections involving international subject matter experts. However, the ubiquity of the internet, and the electronic sharing of data that it enables, has made available a wealth of open source information with the potential to benefit verification efforts. Open source information is already being used by organizations such as the International Atomic Energy Agency to support the verification of state-declared information, prepare inspectors for in-field activities, and to maintain situational awareness . The recent explosion in social media use has opened new doors to exploring the attitudes, moods, and activities around a given topic. Social media platforms, such as Twitter, Facebook, and YouTube, offer an opportunity for individuals, as well as institutions, to participate in a global conversation at minimal cost. Social media data can also provide a more data-rich environment, with text data being augmented with images, videos, and location data. The research described in this paper investigates the utility of applying social media signatures as potential arms control and nonproliferation treaty verification tools and technologies, as determined through a series of case studies. The treaty relevant events that these case studies touch upon include detection of undeclared facilities or activities, determination of unknown events recorded by the International Monitoring System (IMS), and the global media response to the occurrence of an Indian missile launch. The case studies examine how social media can be used to fill an information gap and provide additional confidence to a verification activity. The case studies represent, either directly or through a proxy, instances where social media information may be available that could potentially augment the evaluation of an event. The goal of this paper is to instigate a discussion within the verification community as to where and how social media can be effectively utilized to complement and enhance traditional treaty verification efforts. In addition, this paper seeks to identify areas of future research and development necessary to adapt social media analytic tools and techniques, and to form the seed for social media analytics to aid and inform arms control and nonproliferation policymakers and analysts. While social media analysis (as well as open source analysis as a whole) will not ever be able to replace traditional arms control verification measures, they do supply unique signatures that can augment existing analysis.

  18. Social Media

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Smart Grid Smart Grid Rows of battery racks at the <a href="/node/657906">Salem Smart Power Center</a> in Salem, Oregon. The Battelle-led Pacific Northwest Smart Grid Demonstration Project, will use the center’s 5-megawatt energy storage system to test several smart grid technologies and approaches. | Photo courtesy of Portland General Electric. Rows of battery racks at the Salem Smart Power Center in Salem, Oregon. The Battelle-led Pacific Northwest Smart Grid

  19. LANSCE | Media

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users User Office User Program LANSCE User Group Rosen Scholar Rosen Prize News & Multimedia News Multimedia Events Profiles Highlights Seminars Activity Reports The Pulse User ...

  20. MEDIA CONTACTS:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Erik Olds, (509) 372-8656 October 26, 2009 DRAFT HANFORD TANK CLOSURE AND WASTE MANAGEMENT ENVIRONMENTAL IMPACT STATEMENT AVAILABLE FOR PUBLIC REVIEW Washington, D.C. - The...

  1. Media Contacts:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Susan Scott Washington TRU Solutions (575) 234-7204 U.S. Department of Energy Carlsbad Field Office Waste Isolation Pilot Plant P.O. Box 3090 Carlsbad, New Mexico 88221 www.wipp.energy.gov DOENews For Immediate Release One Hundred Thousand Nuclear Waste Containers Safely Disposed at WIPP CARLSBAD, N.M., April 10, 2008 - The 100,000 th container of defense-related transuranic (TRU) waste was safely disposed 2,150-feet underground at the U.S. Department of Energy's (DOE) Waste Isolation Pilot

  2. Media Contacts:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    energy.gov U.S. Department of Energy Carlsbad Field Office Waste Isolation Pilot Plant P.O. Box 3090 Carlsbad, New Mexico 88221 DOENews For immediate release WIPP Receives 100 th Remote-Handled Waste Shipment CARLSBAD, N.M., January 5, 2008 - Less than a year ago the Waste Isolation Pilot Plant (WIPP) received its first shipment of remote-handled transuranic (RH-TRU) waste. Today, the 100 th RH-TRU waste shipment safely arrived at the Department of Energy site for permanent disposal. "Years

  3. MEDIA ADVISORY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    advanced-placement chemistry class will get to put their wits and crystal-growing skills to the test Monday in the Protein Crystallography Station at the Los Alamos Research...

  4. Durable Media for Long-Term Preservation of Geological Repository Records

    SciTech Connect (OSTI)

    Aoki, K.; Fujii, N.; Kageyama, H.; Yoshimura, K.; Ohuchi, J.; Tsuboya, T.

    2008-07-01

    Durability of selected hard materials as information preserving media has been studied, leading to some promising results. Several engraving experiments on the selected materials confirmed that characters and patterns can be expressed along with shading and gradation. Engraving experiments on durable artificial materials were carried out by applying laser technologies. By selecting appropriate materials and engraving methods, characters and patterns can be expressed along with shading and gradation. These technologies can be applied to not only documentary records but also to markers and monuments. Among the materials, silicon carbide, which has strong resistance against heat wear and chemical impacts, corrosion resistance and wear resistance, showed satisfactory results in terms of accuracy. Thus, it is expected to be a promising material for the long-term record preservation. With respect to the density of characters in written records in the case of dot printing, it was estimated that, with 2-point characters, information totaling 6 to 8 pages of A-4 size can be engraved on a 10 cm x 10 cm plate. When a document that has 500 pages of A4 size paper is engraved on sintered silicon carbide plates, the total volume of recording media is evaluated as follows: - Size of plate: 10 cm x 10 cm; - Size of character to be engraved: 2-points ({approx} 0.7 mm; of readable size by naked eye or using a magnifying glass); - Number of pages of original document to be engraved on a plate: 8; - Number of pages of original document to be engraved on both sides of a plate: 16; - Number of plates needed for a series of document package: 500 / 16 = 32; - The thickness of a plate: 1 mm; - The total thickness of recording media: 32 mm; - Bulk of recording media preserving 500 pages of document: 10 cm x 10 cm x 32 cm. The examination has shown the possibility of long-term preservation of documentation records as a permanent system. A further examination is suggested concerning the assessment of the durability of the sintered silicon carbide plate against wear and chemical impacts. Preserving color pictures and photographs for a long-term duration is also proposed. In conclusion: We have proposed that the concept of a record preservation system is the combination of several different methods in order to impart redundancy to the communication function. The system should be robust that its overall function would not be influenced by partial damage, and also be flexible enough to adapt to the changes of background conditions in the future. Records and information should be preserved by way of both Relay System and Permanent System. The former would maintain record preservation and communication functions in the framework of social systems whereas the latter would consist of durable storehouse facilities, recording media and markers/monuments and be independent of any social systems and human control. Silicon carbide is one of the most promising materials for the Permanent System of Records Preservation. It is expected to be the potential candidate for long-term recording media with its superior characteristics of resistance against heat, wear and chemical impacts, and of engraving accuracy. (authors)

  5. Foam-assisted delivery of nanoscale zero valent iron in porous media

    SciTech Connect (OSTI)

    Ding, Yuanzhao; Liu, Bo; Shen, Xin; Zhong, Lirong; Li, Xiqing

    2013-09-01

    Foam is potentially a promising vehicle to deliver nanoparticles for vadose zone remediation as foam can overcome the intrinsic problems associated with solution-based delivery, such as preferential flow and contaminant mobilization. In this work, the feasibility of using foam to deliver nanoscale zero valent iron (nZVI) in unsaturated porous media was investigated. Foams generated using surfactant sodium lauryl ether sulfate (SLES) showed excellent ability to carry nZVI. SLES and nZVI concentrations in the foaming solutions did not affect the percentages of nZVI concentrations in foams relative to nZVI concentrations in the solutions. When foams carrying nZVI were injected through the unsaturated columns, the fractions of nZVI exiting the column were much higher than those when nZVI was injected in liquid. The enhanced nZVI transport implies that foam delivery could significantly increase the radius of influence of injected nZVI. The type and concentrations of surfactants and the influent nZVI concentrations did not noticeably affect nZVI transport during foam delivery. In contrast, nZVI retention increased considerably as the grain size of porous media decreased. Oxidation of foam-delivered nZVI due to oxygen diffusion into unsaturated porous media was visually examined using a flow cell. It was demonstrated that if foams are injected to cover a deep vadose zone layer, oxidation would only cause a small fraction of foam-delivered nZVI to be oxidized before it reacts with contaminants.

  6. SAVANNAH RIVER OPERATIONS OFFICE AIKEN, SC 29808 NEWS MEDIA CONTACTS: FOR IMMEDIATE RELEASE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AIKEN, SC 29808 NEWS MEDIA CONTACTS: FOR IMMEDIATE RELEASE Sonya Goines, DOE-SR, (803) 952-8564 Thursday, May 12, 2016 sonya.goines@srs.gov Dean Campbell, SRR (803) 208-8270 dean.campbell@srs.gov SRS Celebrates 20 years of Vitrification Facility Operations and Eighth Radioactive Waste Tank Closure Senior DOE and SRS Officials Gather to Commemorate Historic Cleanup Milestones AIKEN, S.C. (May 12, 2016) - Today, U.S. Department of Energy (DOE) Assistant Secretary for Environmental Management (EM)

  7. Joint DOE-CH2M HILL News Release Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Media Contact: For Immediate Release: Destry Henderson, CH2M HILL, (509) 376-8644, September 10, 2014 destry_j_henderson@rl.gov Geoff Tyree, DOE, (509)376-4171, geoffrey.tyree@rl.doe.gov WORKERS BEGIN CLEANING OUT HANFORD'S HISTORIC MCCLUSKEY ROOM Safely cleaning out room is key step toward Plutonium Finishing Plant demolition RICHLAND, Wash. - Workers have entered one of the most hazardous rooms at the Hanford Site in Washington state to begin final cleanup of a room that became known to

  8. Joint DOE-CH2M News Release Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Joint DOE-CH2M News Release Media Contact: For Immediate Release: Destry Henderson, CH2M, (509) 376-8644, April 20, 2015 destry_j_henderson@rl.gov Mark Heeter, DOE, (509)373-1970, mark.heeter@rl.doe.gov WORKERS REMOVE LAST PENCIL TANK FROM KEY AREA OF HANFORD'S PLUTONIUM FINISHING PLANT Removal of contaminated pencil tanks brings facility one step closer toward demolition RICHLAND, Wash. - More than 50 pencil tank assemblies - some two stories tall - contaminated with chemical and radiological

  9. Origin of magnetic switching field distribution in bit patterned media based on pre-patterned substrates

    SciTech Connect (OSTI)

    Pfau, B.; Guenther, C. M.; Eisebitt, S.; Guehrs, E.; Hauet, T.; Yang, H.; Vinh, L.; Xu, X.; Yaney, D.; Hellwig, O.; Rick, R.

    2011-08-08

    Using a combination of synchrotron radiation based magnetic imaging and high-resolution transmission electron microscopy we reveal systematic correlations between the magnetic switching field and the internal nanoscale structure of individual islands in bit patterned media fabricated by Co/Pd-multilayer deposition onto pre-patterned substrates. We find that misaligned grains at the island periphery are a common feature independent of the island switching field, while irregular island shapes and misaligned grains specifically extending into the center of an island are systematically correlated with a reduced island reversal field.

  10. Principal Media Contact: Lindsey MonBarren Savannah River Nuclear Solutions, LLC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lindsey MonBarren Savannah River Nuclear Solutions, LLC 803.952.8053 lindsey.monbarren@srs.gov DOE Media Contact: Susan Clizbe 803.952.8281 susan.clizbe@srs.gov SRS Begins Cleanup of Building Used to Produce Fuel for Space Program AIKEN, S.C. (Mar. 7, 2016) - The Department of Energy's managing and operating contractor at the Savannah River Site (SRS), Savannah River Nuclear Solutions (SRNS), recently began cleanup of a building containing residual hold-up of plutonium (Pu)-238, which was used

  11. Energy analysis on use of air and superheated steam as drying media

    SciTech Connect (OSTI)

    Tarnawski, W.Z.; Mitera, J.; Borowski, P.; Klepaczka, A. [Technical Univ. of Lodz (Poland). Inst. of Papermaking and Paper Machines

    1996-10-01

    The physical properties of air and superheated steam were analyzed in a range of temperatures applied in paper and paperboard drying processes. On the basis of tests carried out on a pilot stand the values of energy indices for air and steam drying processes are compared. With the drying media temperature as T{sub M} = 300 C, nozzle velocity {nu} = 60 m/s and using the Huang and Mujumdar model as well as relationships given by Chance a comparative analysis of the results has been carried out. Variation of several indices in the range of temperatures 100--600 C and various nozzle velocities was studied.

  12. Media Advisory - The Virginia Middle School Science Bowl Is Set For March 6

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at Jefferson Lab | Jefferson Lab The Virginia Middle School Science Bowl Is Set For March 6 at Jefferson Lab Media Advisory - The Virginia Middle School Science Bowl Is Set For March 6 at Jefferson Lab What: The 2010 Virginia Regional Middle School Science Bowl When: Saturday, March 6, 2010. Round-robin competition will run from 10 a.m. - noon. The double-elimination, semi-final and finalist rounds will run from 1:30 to approximately 4 p.m. Awards will be presented immediately after the

  13. Media Advisory: Virginia Middle School Science Bowl Set For March 5 at

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab | Jefferson Lab Advisory: Virginia Middle School Science Bowl Set For March 5 at Jefferson Lab Media Advisory: Virginia Middle School Science Bowl Set For March 5 at Jefferson Lab What: The Department of Energy's 2011 Virginia Regional Middle School Science Bowl When: Saturday, March 5, 2011. Round-robin competition will run from 9 a.m. - noon. The double-elimination, semi-final and finalist rounds will run from 1 p.m. to approximately 4 p.m. Awards will be presented

  14. Text and Structural Data Mining of Influenza Mentions in Web and Social Media

    SciTech Connect (OSTI)

    Corley, Courtney D.; Cook, Diane; Mikler, Armin R.; Singh, Karan P.

    2010-02-22

    Text and structural data mining of Web and social media (WSM) provides a novel disease surveillance resource and can identify online communities for targeted public health communications (PHC) to assure wide dissemination of pertinent information. WSM that mention influenza are harvested over a 24-week period, 5-October-2008 to 21-March-2009. Link analysis reveals communities for targeted PHC. Text mining is shown to identify trends in flu posts that correlate to real-world influenza-like-illness patient report data. We also bring to bear a graph-based data mining technique to detect anomalies among flu blogs connected by publisher type, links, and user-tags.

  15. MEDIA ADVISORY: REAC/TS hosts 5th International Symposium on the Medical

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Basis for Radiation Accident Preparedness MEDIA ADVISORY: REAC/TS hosts 5th International Symposium on the Medical Basis for Radiation Accident Preparedness FOR IMMEDIATE RELEASE June 27, 2011 FY11-35 Who: Radiation Emergency Assistance Center/Training Site What: REAC/TS-a program of the Oak Ridge Institute for Science and Education- is hosting a three-day symposium titled the 5th International REAC/TS Symposium on the Medical Basis for Radiation Accident Preparedness. The symposium will

  16. Technical, environmental, and economic evaluation of Plastic Media Blasting for paint stripping

    SciTech Connect (OSTI)

    Darvin, C.H.; Wilmoth, R.C.

    1987-01-01

    The U.S. Army Toxic and Hazardous Materials Agency and the U.S. EPA Water Engineering Research Laboratory cooperated to investigate the feasibility of Plastic Media Blasting (PMB) as a paint-removal technique for aluminum military shelters. The PMB process was compared in field tests with sandblasting and with chemical stripping to determine relative cost, effectiveness, efficiency, and environmental consequence. The PMB process was judged superior to the chemical-stripping process and marginally better than sandblasting based upon the evaluation criteria.

  17. Theory of weak scattering of stochastic electromagnetic fields from deterministic and random media

    SciTech Connect (OSTI)

    Tong Zhisong; Korotkova, Olga

    2010-09-15

    The theory of scattering of scalar stochastic fields from deterministic and random media is generalized to the electromagnetic domain under the first-order Born approximation. The analysis allows for determining the changes in spectrum, coherence, and polarization of electromagnetic fields produced on their propagation from the source to the scattering volume, interaction with the scatterer, and propagation from the scatterer to the far field. An example of scattering of a field produced by a {delta}-correlated partially polarized source and scattered from a {delta}-correlated medium is provided.

  18. Quantitative Imaging and In Situ Concentration Measurements of Quantum Dot Nanomaterials in Variably Saturated Porous Media

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Uyuşur, Burcu; Snee, Preston T.; Li, Chunyan; Darnault, Christophe J. G.

    2016-01-01

    Knowledge of the fate and transport of nanoparticles in the subsurface environment is limited, as techniques to monitor and visualize the transport and distribution of nanoparticles in porous media and measure their in situ concentrations are lacking. To address these issues, we have developed a light transmission and fluorescence method to visualize and measure in situ concentrations of quantum dot (QD) nanoparticles in variably saturated environments. Calibration cells filled with sand as porous medium and various known water saturation levels and QD concentrations were prepared. By measuring the intensity of the light transmitted through porous media exposed to fluorescent lightmore » and by measuring the hue of the light emitted by the QDs under UV light exposure, we obtained simultaneously in situ measurements of water saturation and QD nanoparticle concentrations with high spatial and temporal resolutions. Water saturation was directly proportional to the light intensity. A linear relationship was observed between hue-intensity ratio values and QD concentrations for constant water saturation levels. The advantages and limitations of the light transmission and fluorescence method as well as its implications for visualizing and measuring in situ concentrations of QDs nanoparticles in the subsurface environment are discussed.« less

  19. Plasmas in Multiphase Media: Bubble Enhanced Discharges in Liquids and Plasma/Liquid Phase Boundaries

    SciTech Connect (OSTI)

    Kushner, Mark Jay

    2014-07-10

    In this research project, the interaction of atmospheric pressure plasmas with multi-phase media was computationally investigated. Multi-phase media includes liquids, particles, complex materials and porous surfaces. Although this investigation addressed fundamental plasma transport and chemical processes, the outcomes directly and beneficially affected applications including biotechnology, medicine and environmental remediation (e.g., water purification). During this project, we made advances in our understanding of the interaction of atmospheric pressure plasmas in the form of dielectric barrier discharges and plasma jets with organic materials and liquids. We also made advances in our ability to use computer modeling to represent these complex processes. We determined the method that atmospheric pressure plasmas flow along solid and liquid surfaces, and through endoscopic like tubes, deliver optical and high energy ion activation energy to organic and liquid surfaces, and produce reactivity in thin liquid layers, as might cover a wound. We determined the mechanisms whereby plasmas can deliver activation energy to the inside of liquids by sustaining plasmas in bubbles. These findings are important to the advancement of new technology areas such as plasma medicine

  20. A generalized Debye source approach to electromagnetic scattering in layered media

    SciTech Connect (OSTI)

    ONeil, Michael

    2014-01-15

    The standard solution to time-harmonic electromagnetic scattering problems in homogeneous layered media relies on the use of the electric field dyadic Green's function. However, for small values of the governing angular frequency ?, evaluation of the electric field using this Green's function exhibits numerical instability. In this short note, we provide an alternative approach which is immune from this low-frequency breakdown as ? ? 0. Our approach is based on the generalized Debye source representation of Maxwell fields. Using this formulation, the electric and magnetic fields gracefully decouple in the static limit, a behavior similar to that of the classical Lorenz-Debye-Mie representation of Maxwell fields in spherical geometries. We derive extensions of both the generalized Deybe source and Lorenz-Debye-Mie representations to planar geometries, as well as provide equations for the solution of scattering from a perfectly conducting half-space and in layered media using a Sommerfeld-like approach. These formulas are stable as ? tends to zero, and offer alternatives to the electric field dyadic Green's function.

  1. Improved Modeling and Understanding of Diffusion-Media Wettability on Polymer-Electrolyte-Fuel-Cell Performance

    SciTech Connect (OSTI)

    Weber, Adam

    2010-03-05

    A macroscopic-modeling methodology to account for the chemical and structural properties of fuel-cell diffusion media is developed. A previous model is updated to include for the first time the use of experimentally measured capillary pressure -- saturation relationships through the introduction of a Gaussian contact-angle distribution into the property equations. The updated model is used to simulate various limiting-case scenarios of water and gas transport in fuel-cell diffusion media. Analysis of these results demonstrate that interfacial conditions are more important than bulk transport in these layers, where the associated mass-transfer resistance is the result of higher capillary pressures at the boundaries and the steepness of the capillary pressure -- saturation relationship. The model is also used to examine the impact of a microporous layer, showing that it dominates the response of the overall diffusion medium. In addition, its primary mass-transfer-related effect is suggested to be limiting the water-injection sites into the more porous gas-diffusion layer.

  2. Experimental determination of the complex stiffness tensor and Euler angles in anisotropic media using ultrasonic waves

    SciTech Connect (OSTI)

    Alaoui-Ismaili, N.; Guy, P.; Chassignole, B.

    2014-02-18

    The aim of this work is to measure the complex elastic tensor and Euler angles in very complex anisotropic media like austenitic steel welds, by inverse problem resolution from experimental data. The obtained experimental characteristics of the anisotropic material will be injected in a FE code developed by EDF enabling the simulation of an actual ultrasonic NDE of welds. The present work aims to provide reliable input data to the 3D future development of the code. In particular, this complex elastic tensor will allow to predict by modeling beam skewing ant attenuation in an austenitic weld. The investigation of such anisotropic media is very complex because of the directional dependency of the elastic stiffness tensor. Then we will discuss the use of a hybrid genetic algorithm to overcome this difficulty. The identification method is based on waveforms spectra reconstruction associated to a physical model describing wave propagation in plates, during underwater measurements. The entire procedure is qualified and validated using simulated data. Moreover, a comparison of the estimated elastic coefficients with literature values and ultrasonic measurements obtained in transmission is also given, at the end of the paper.

  3. Plutonium(IV) precipitates formed in alkaline media in the presence of various anions

    SciTech Connect (OSTI)

    Krot, N.N.; Shilov, V.P.; Yusov, A.B.; Tananaev, I.G.; Grigoriev, M.S.; Garnov, A.Yu.; Perminov, V.P.; Astafurova, L.N.

    1998-09-01

    The tendency of Pu(IV) to hydrolyze and form true solutions, colloid solutions, or insoluble precipitates has been known since the Manhattan Project. Since then, specific studies have been performed to examine in detail the equilibria of Pu(IV) hydrolytic reactions in various media. Great attention also has been paid to the preparation, structure, and properties of Pu(IV) polymers or colloids. These compounds found an important application in sol-gel technology for the preparation of nuclear fuel materials. A most important result of these works was the conclusion that Pu(IV) hydroxide, after some aging, consists of very small PuO{sub 2} crystallites and should therefore be considered to be Pu(IV) hydrous oxide. However, studies of the properties and behavior of solid Pu(IV) hydroxide in complex heterogeneous systems are rare. The primary goal of this investigation was to obtain data on the composition and properties of Pu(IV) hydrous oxide or other compounds formed in alkaline media under different conditions. Such information is important to understand Pu(IV) behavior and the forms of its existence in the Hanford Site alkaline tank waste sludge. This knowledge then may be applied in assessing plutonium criticality hazards in the storage, retrieval, and treatment of Hanford Site tank wastes as well as in understanding its contribution to the transuranic waste inventory (threshold at 100 nCi/g or about 5 {times} 10{sup {minus}6} M) of the separate solution and solid phases.

  4. Semianalytical Solutions of Radioactive or Reactive Tracer Transport in Layered Fractured Media

    SciTech Connect (OSTI)

    G.J. Moridis; G. S. Bodvarsson

    2001-10-01

    In this paper, semianalytical solutions are developed for the problem of transport of radioactive or reactive tracers (solutes or colloids) through a layered system of heterogeneous fractured media with misaligned fractures. The tracer transport equations in the matrix account for (a) diffusion, (b) surface diffusion (for solutes only), (c) mass transfer between the mobile and immobile water fractions, (d) linear kinetic or equilibrium physical, chemical, or combined solute sorption or colloid filtration, and (e) radioactive decay or first order chemical reactions. Any number of radioactive decay daughter products (or products of a linear, first-order reaction chain) can be tracked. The tracer-transport equations in the fractures account for the same processes, in addition to advection and hydrodynamic dispersion. Additionally, the colloid transport equations account for straining and velocity adjustments related to the colloidal size. The solutions, which are analytical in the Laplace space, are numerically inverted to provide the solution in time and can accommodate any number of fractured and/or porous layers. The solutions are verified using analytical solutions for limiting cases of solute and colloid transport through fractured and porous media. The effect of important parameters on the transport of {sup 3}H, {sup 237}Np and {sup 239}Pu (and its daughters) is investigated in several test problems involving layered geological systems of varying complexity. {sup 239}Pu colloid transport problems in multilayered systems indicate significant colloid accumulations at straining interfaces but much faster transport of the colloid than the corresponding strongly sorbing solute species.

  5. Gray and multigroup radiation transport models for two-dimensional binary stochastic media using effective opacities

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Olson, Gordon L.

    2015-09-24

    One-dimensional models for the transport of radiation through binary stochastic media do not work in multi-dimensions. In addition, authors have attempted to modify or extend the 1D models to work in multidimensions without success. Analytic one-dimensional models are successful in 1D only when assuming greatly simplified physics. State of the art theories for stochastic media radiation transport do not address multi-dimensions and temperature-dependent physics coefficients. Here, the concept of effective opacities and effective heat capacities is found to well represent the ensemble averaged transport solutions in cases with gray or multigroup temperature-dependent opacities and constant or temperature-dependent heat capacities. Inmore » every case analyzed here, effective physics coefficients fit the transport solutions over a useful range of parameter space. The transport equation is solved with the spherical harmonics method with angle orders of n=1 and 5. Although the details depend on what order of solution is used, the general results are similar, independent of angular order.« less

  6. Conservation Laws for Coupled Hydro-mechanical Processes in Unsaturated Porous Media: Theory and Implementation

    SciTech Connect (OSTI)

    Borja, R I; White, J A

    2010-02-19

    We develop conservation laws for coupled hydro-mechanical processes in unsaturated porous media using three-phase continuum mixture theory. From the first law of thermodynamics, we identify energy-conjugate variables for constitutive modeling at macroscopic scale. Energy conjugate expressions identified relate a certain measure of effective stress to the deformation of the solid matrix, the degree of saturation to the matrix suction, the pressure in each constituent phase to the corresponding intrinsic volume change of this phase, and the seepage forces to the corresponding pressure gradients. We then develop strong and weak forms of boundary-value problems relevant for 3D finite element modeling of coupled hydro-mechanical processes in unsaturated porous media. The paper highlights a 3D numerical example illustrating the advances in the solution of large-scale coupled finite element systems, as well as the challenges in developing more predictive tools satisfying the basic conservation laws and the observed constitutive responses for unsaturated porous materials.

  7. Direct pore-level modeling of incompressible fluid flow in porous media

    SciTech Connect (OSTI)

    Ovaysi, Saeed; Piri, Mohammad

    2010-09-20

    We present a dynamic particle-based model for direct pore-level modeling of incompressible viscous fluid flow in disordered porous media. The model is capable of simulating flow directly in three-dimensional high-resolution micro-CT images of rock samples. It is based on moving particle semi-implicit (MPS) method. We modify this technique in order to improve its stability for flow in porous media problems. Using the micro-CT image of a rock sample, the entire medium, i.e., solid and fluid, is discretized into particles. The incompressible Navier-Stokes equations are then solved for each particle using the MPS summations. The model handles highly irregular fluid-solid boundaries effectively. An algorithm to split and merge fluid particles is also introduced. To handle the computational load, we present a parallel version of the model that runs on distributed memory computer clusters. The accuracy of the model is validated against the analytical, numerical, and experimental data available in the literature. The validated model is then used to simulate both unsteady- and steady-state flow of an incompressible fluid directly in a representative elementary volume (REV) size micro-CT image of a naturally-occurring sandstone with 3.398 {mu}m resolution. We analyze the quality and consistency of the predicted flow behavior and calculate absolute permeability using the steady-state flow rate.

  8. Flagella-Mediated Differences in Deposition Dynamics for Azotobacter vinelandii in Porous Media

    SciTech Connect (OSTI)

    Lu, Nanxi; Bevard, Tara; Massoudieh, Arash; Zhang, Changyong; Dohnalkova, Alice; Zilles, Julie L.; Nguyen, Thanh H.

    2013-05-21

    A multi-scale approach was designed to investigate deposition of flagellated and non-flagellated strains of Azotobacter vinelandii in porous media. In a radial stagnation point flow cell (RSPF), the deposition rate of the flagellated strain (DJ77) on quartz was higher than that of the non-flagellated (Fla-) strain. In contrast, deposition of the Fla- strain exceeded that of DJ77 in two-dimensional silicon microfluidic models (micromodels) and in columns packed with glass beads. Direct cell counts in micromodel experiments showed decreasing values of clean collector removal efficiencies over time, suggesting that approaching cells were blocked from deposition by cells already attached to the collector surface. Column breakthrough curves for both strains also showed a decrease in deposition rates with time. Modeling results showed that blocking becomes effective for DJ77 strain at lower ionic strengths (1mM and 10mM), while for Fla- strain blocking was similar at all ionic strengths. In later stages of micromodel experiments, a ripening effect was also observed, where cells preferentially attached to already attached cells. Ripening happened earlier with the Fla- strain, which suggested that flagella interfered with ripening. Different mechanisms dominate at different stages of bacteria transport in porous media.

  9. Gray and multigroup radiation transport models for two-dimensional binary stochastic media using effective opacities

    SciTech Connect (OSTI)

    Olson, Gordon L.

    2015-09-24

    One-dimensional models for the transport of radiation through binary stochastic media do not work in multi-dimensions. In addition, authors have attempted to modify or extend the 1D models to work in multidimensions without success. Analytic one-dimensional models are successful in 1D only when assuming greatly simplified physics. State of the art theories for stochastic media radiation transport do not address multi-dimensions and temperature-dependent physics coefficients. Here, the concept of effective opacities and effective heat capacities is found to well represent the ensemble averaged transport solutions in cases with gray or multigroup temperature-dependent opacities and constant or temperature-dependent heat capacities. In every case analyzed here, effective physics coefficients fit the transport solutions over a useful range of parameter space. The transport equation is solved with the spherical harmonics method with angle orders of n=1 and 5. Although the details depend on what order of solution is used, the general results are similar, independent of angular order.

  10. New insights into designing metallacarborane based room temperature hydrogen storage media

    SciTech Connect (OSTI)

    Bora, Pankaj Lochan; Singh, Abhishek K.

    2013-10-28

    Metallacarboranes are promising towards realizing room temperature hydrogen storage media because of the presence of both transition metal and carbon atoms. In metallacarborane clusters, the transition metal adsorbs hydrogen molecules and carbon can link these clusters to form metal organic framework, which can serve as a complete storage medium. Using first principles density functional calculations, we chalk out the underlying principles of designing an efficient metallacarborane based hydrogen storage media. The storage capacity of hydrogen depends upon the number of available transition metal d-orbitals, number of carbons, and dopant atoms in the cluster. These factors control the amount of charge transfer from metal to the cluster, thereby affecting the number of adsorbed hydrogen molecules. This correlation between the charge transfer and storage capacity is general in nature, and can be applied to designing efficient hydrogen storage systems. Following this strategy, a search for the best metallacarborane was carried out in which Sc based monocarborane was found to be the most promising H{sub 2} sorbent material with a 9 wt.% of reversible storage at ambient pressure and temperature.

  11. Generalized entering coefficients: A criterion for foam stability against oil in porous media

    SciTech Connect (OSTI)

    Bergeron, V.; Fagan, M.E.; Radke, C.J.

    1993-09-01

    The unique mobility-control properties of foam in porous media make it an attractive choice as an injection fluid for enhanced oil recovery. Unfortunately, in many cases oil has a major destabilizing effect on foam. Therefore, it is important to understand how oil destabilizes foam and what surfactant properties lead to increased stability against oil. To explain the stability of foam in porous media in the presence of oil, we generalize the ideas of spreading and entering behavior using Frumkin-Deryaguin wetting theory. This formulation overcomes the inherent deficiencies in the classical spreading and entering coefficients used to explain foam stability against oil. We find that oil-tolerant foam can be produced by making the oil surface ``water wet``. To test our theoretical ideas, we measure foam-flow resistance through 45--70 {mu}m glass beadpacks, surface and interfacial tensions, and disjoining pressure isotherms for foam and pseudoemulsion films for a variety of surfactant/oil systems. Most notably, we measure pseudoemulsion-film disjoining pressure isotherms for the first time and directly establish that pseudoemulsion film stability controls the stability of the foam in the systems we tested. Moreover, we demonstrate the correspondence between stable pseudoemulsion films, negative entering behavior, and oil-tolerant foams.

  12. Matisse: A Visual Analytics System for Exploring Emotion Trends in Social Media Text Streams

    SciTech Connect (OSTI)

    Steed, Chad A; Drouhard, Margaret MEG G; Beaver, Justin M; Pyle, Joshua M; BogenII, Paul L.

    2015-01-01

    Dynamically mining textual information streams to gain real-time situational awareness is especially challenging with social media systems where throughput and velocity properties push the limits of a static analytical approach. In this paper, we describe an interactive visual analytics system, called Matisse, that aids with the discovery and investigation of trends in streaming text. Matisse addresses the challenges inherent to text stream mining through the following technical contributions: (1) robust stream data management, (2) automated sentiment/emotion analytics, (3) interactive coordinated visualizations, and (4) a flexible drill-down interaction scheme that accesses multiple levels of detail. In addition to positive/negative sentiment prediction, Matisse provides fine-grained emotion classification based on Valence, Arousal, and Dominance dimensions and a novel machine learning process. Information from the sentiment/emotion analytics are fused with raw data and summary information to feed temporal, geospatial, term frequency, and scatterplot visualizations using a multi-scale, coordinated interaction model. After describing these techniques, we conclude with a practical case study focused on analyzing the Twitter sample stream during the week of the 2013 Boston Marathon bombings. The case study demonstrates the effectiveness of Matisse at providing guided situational awareness of significant trends in social media streams by orchestrating computational power and human cognition.

  13. Generalized Dix equation and analytic treatment of normal-movement velocity for anisotropic media

    SciTech Connect (OSTI)

    Grechka, V.; Tsvankin, I.; Cohen, J.K.

    1999-03-01

    Despite the complexity of wave propagation in anisotropic media, reflection moveout on conventional common-midpoint (CMP) spreads is usually well described by the normal-moveout (NMO) velocity defined in the zero-offset limit. In their recent work, Grechka and Tsvankin showed that the azimuthal variation of NMO velocity around a fixed CMP location generally has an elliptical form (i.e., plotting the NMO velocity in each azimuthal direction produces an ellipse) and is determined by the spatial derivatives of the slowness vector evaluated at the CMP location. This formalism is used here to develop exact solutions for the NMO velocity in anisotropic media of arbitrary symmetry. The high accuracy of the NMO expressions is illustrated by comparison with ray-traced reflection traveltimes in piecewise-homogeneous, azimuthally anisotropic models. The authors also apply the generalized Dix equation to field data collected over a fractured reservoir and show that P-wave moveout can be used to find the depth-dependent fracture orientation and to evaluate the magnitude of azimuthal anisotropy.

  14. Influence of reabsorption and reemission on stimulated Raman scattering of polymethine dyes in multiple scattering media

    SciTech Connect (OSTI)

    Yashchuk, V P; Komyshan, A O; Smaliuk, A P; Prygodiuk, O A; Ishchenko, A A; Olkhovyk, L A

    2013-12-31

    It is shown that reabsorption of the luminescence radiation in the range of its overlapping with the absorption spectrum and the following reemission to a long-wavelength range may noticeably affect the process of stimulated Raman scattering (SRS) in polymethine dyes in multiple scattering media (MSM). This is related to the fact that SRS in such media occurs jointly with the random lasing (RL), which favors SRS and makes up with it a united nonlinear process. Reemission into the long-wavelength spectrum range amplified in MSM causes the RL spectrum to shift to longer wavelengths and initiates the long-wavelength band of RL, in which a main part of the lasing energy is concentrated. This weakens or completely stops the SRS if the band is beyond the range of possible spectral localisation of Stokes lines. This process depends on the efficiency of light scattering, dye concentration, temperature and pump intensity; hence, there exist optimal values of these parameters for obtaining SRS in MSM. (nonlinear optical phenomena)

  15. METHOD DEVELOPMENT FOR DETERMINING THE HYDRAULIC CONDUCTIVITY OF FRACTURED POROUS MEDIA

    SciTech Connect (OSTI)

    Dixon, K.

    2013-09-30

    Plausible, but unvalidated, theoretical model constructs for unsaturated hydraulic conductivity of fractured porous media are currently used in Performance Assessment (PA) modeling for cracked saltstone and concrete (Flach 2011). The Nuclear Regulatory Commission (NRC) has expressed concern about the lack of model support for these assumed Moisture Characteristic Curves (MCC) data, as noted in Requests for Additional Information (RAIs) PA-8 and SP-4 (Savannah River Remediation, LLC, 2011). The objective of this task was to advance PA model support by developing an experimental method for determining the hydraulic conductivity of fractured cementitious materials under unsaturated conditions, and to demonstrate the technique on fractured saltstone samples. The task was requested through Task Technical Request (TTR) HLW-SSF-TTR-2012-0016 and conducted in accordance with Task Technical & Quality Assurance Plan (TTQAP) SRNL-TR-2012-00090. Preliminary method development previously conducted by Kohn et al. (2012) identified transient outflow extraction as the most promising method for characterizing the unsaturated properties of fractured porous media. While the research conducted by Kohn et al. (2012) focused on fractured media analogs such as stacked glass slides, the current task focused directly on fractured saltstone. For this task, four sample types with differing fracture geometries were considered: 1) intact saltstone, 2) intact saltstone with a single saw cut, smooth surface fracture, 3) micro-fractured saltstone (induced by oven drying), and 4) micro-fractured saltstone with a single, fully-penetrating, rough-surface fracture. Each sample type was tested initially for saturated hydraulic conductivity following method ASTM D 5084 using a flexible wall permeameter. Samples were subsequently tested using the transient outflow extraction method to determine cumulative outflow as a function of time and applied pressure. Of the four sample types tested, two yielded datasets suitable for analysis (sample types 3 and 4). The intact saltstone sample (sample type 1) did not yield any measureable outflow over the pressure range of the outflow test (0-1000 cm H{sub 2}O). This was expected because the estimated air entry pressure for intact saltstone is on the order of 100,000 cm H{sub 2}O (Dixon et al., 2009). The intact saltstone sample with a single saw cut smooth surface fracture (sample type 2) did not produce useable data because the fracture completely drained at less than 10 cm H{sub 2}O applied pressure. The cumulative outflow data from sample types 3 and 4 were analyzed using an inverse solution of the Richards equation for water flow in variably saturated porous media. This technique was implemented using the computer code Hydrus-1D (im?nek et al., 2008) and the resulting output included the van Genuchten-Mualem water retention and relative permeability parameters and predicted saturated hydraulic conductivity (Van Genuchten, 1980; Van Genuchten et al., 1991). Estimations of relative permeability and saturated conductivity are possible because the transient response of the sample to pressure changes is recorded during the multi-step outflow extraction test. Characteristic curves were developed for sample types 3 and 4 based on the results of the transient outflow method and compared to that of intact saltstone previously reported by Dixon et al. (2009). The overall results of this study indicate that the outflow extraction method is suitable for measuring the hydraulic properties of micro-fractured porous media. The resulting cumulative outflow data can be analyzed using the computer code Hydrus-1D to generate the van Genuchten curve fitting parameters that adequately describe fracture drainage. The resulting characteristic curves are consistent with blended characteristic curves that combine the behaviors of low pressure drainage associated with fracture flow with high pressure drainage from the bulk saltstone matrix.

  16. Information needs for characterization of high-level waste repository sites in six geologic media. Volume 1. Main report

    SciTech Connect (OSTI)

    1985-05-01

    Evaluation of the geologic isolation of radioactive materials from the biosphere requires an intimate knowledge of site geologic conditions, which is gained through precharacterization and site characterization studies. This report presents the results of an intensive literature review, analysis and compilation to delineate the information needs, applicable techniques and evaluation criteria for programs to adequately characterize a site in six geologic media. These media, in order of presentation, are: granite, shale, basalt, tuff, bedded salt and dome salt. Guidelines are presented to assess the efficacy (application, effectiveness, and resolution) of currently used exploratory and testing techniques for precharacterization or characterization of a site. These guidelines include the reliability, accuracy and resolution of techniques deemed acceptable, as well as cost estimates of various field and laboratory techniques used to obtain the necessary information. Guidelines presented do not assess the relative suitability of media. 351 refs., 10 figs., 31 tabs.

  17. Flow in porous media, phase and ultralow interfacial tensions: Mechanisms of enhanced petroleum recovery

    SciTech Connect (OSTI)

    Davis, H.T.; Scriven, L.E.

    1991-07-01

    A major program of university research, longer-ranged and more fundamental in approach than industrial research, into basic mechanisms of enhancing petroleum recovery and into underlying physics, chemistry, geology, applied mathematics, computation, and engineering science has been built at Minnesota. The original focus was surfactant-based chemical flooding, but the approach taken was sufficiently fundamental that the research, longer-ranged than industrial efforts, has become quite multidirectional. Topics discussed are volume controlled porosimetry; fluid distribution and transport in porous media at low wetting phase saturation; molecular dynamics of fluids in ultranarrow pores; molecular dynamics and molecular theory of wetting and adsorption; new numerical methods to handle initial and boundary conditions in immiscible displacement; electron microscopy of surfactant fluid microstructure; low cost system for animating liquid crystallites viewed with polarized light; surfaces of constant mean curvature with prescribed contact angle.

  18. THERMAL MODELING ANALYSIS OF CST MEDIA IN THE SMALL COLUMN ION EXCHANGE PROJECT

    SciTech Connect (OSTI)

    Lee, S.

    2010-11-01

    Models have been developed to simulate the thermal characteristics of Crystalline Silicotitanate (CST) ion exchange media fully loaded with radioactive cesium in a column configuration and distributed within a waste storage tank. This work was conducted to support the Small Column Ion Exchange (SCIX) program which is focused on processing dissolved, high-sodium salt waste for the removal of specific radionuclides (including Cs-137, Sr-90, and actinides) within a High Level Waste (HLW) storage tank at the Savannah River Site. The SCIX design includes CST columns inserted and supported in the tank top risers for cesium removal. Temperature distributions and maximum temperatures across the column were calculated with a focus on process upset conditions. A two-dimensional computational modeling approach for the in-column ion-exchange domain was taken to include conservative, bounding estimates for key parameters such that the results would provide the maximum centerline temperatures achievable under the design configurations using a feed composition known to promote high cesium loading on CST. One salt processing scenario includes the transport of the loaded (and possibly ground) CST media to the treatment tank floor. Therefore, additional thermal modeling calculations were conducted using a three-dimensional approach to evaluate temperature distributions for the entire in-tank domain including distribution of the spent CST media either as a mound or a flat layer on the tank floor. These calculations included mixtures of CST with HLW sludge or loaded Monosodium Titanate (MST) media used for strontium/actinide sorption. The current full-scale design for the CST column includes one central cooling pipe and four outer cooling tubes. Most calculations assumed that the fluid within the column was stagnant (i.e. no buoyancy-induced flow) for a conservative estimate. A primary objective of these calculations was to estimate temperature distributions across packed CST beds immersed in waste supernate or filled with dry air under various accident scenarios. Accident scenarios evaluated included loss of salt solution flow through the bed (a primary heat transfer mechanism), inadvertent column drainage, and loss of active cooling in the column. The calculation results showed that for a wet CST column with active cooling through one central and four outer tubes and 35 C ambient external air, the peak temperature for the fully-loaded column is about 63 C under the loss of fluid flow accident, which is well below the supernate boiling point. The peak temperature for the naturally-cooled (no active, engineered cooling) wet column is 156 C under fully-loaded conditions, exceeding the 130 C boiling point. Under these conditions, supernate boiling would maintain the column temperature near 130 C until all supernate was vaporized. Without active engineered cooling and assuming a dry column suspended in unventilated air at 35 C, the fully-loaded column is expected to rise to a maximum of about 258 C due to the combined loss-of coolant and column drainage accidents. The modeling results demonstrate that the baseline design using one central and four outer cooling tubes provides a highly efficient cooling mechanism for reducing the maximum column temperature. Results for the in-tank modeling calculations clearly indicate that when realistic heat transfer boundary conditions are imposed on the bottom surface of the tank wall, as much as 450 gallons of ground CST (a volume equivalent to two ion exchange processing cycles) in an ideal hemispherical shape (the most conservative geometry) can be placed in the tank without exceeding the 100 C wall temperature limit. Furthermore, in the case of an evenly-distributed flat layer, the tank wall reaches the temperature limit after the ground CST material reaches a height of approximately 8 inches.

  19. Polybenzimidazole compounds, polymeric media, and methods of post-polymerization modifications

    DOE Patents [OSTI]

    Klaehn, John R.; Peterson, Eric S.; Wertsching, Alan K.; Orme, Christopher J.; Luther, Thomas A.; Jones, Michael G.

    2007-08-21

    A PBI compound includes imidazole nitrogens at least a portion of which are substituted with an organic-inorganic hybrid moiety. At least 85% of the imidazole nitrogens may be substituted. The organic-inorganic hybrid moiety may be an organosilane moiety, for example, (R)Me.sub.2SiCH.sub.2-- where R is selected from among methyl, phenyl, vinyl, and allyl. The PBI compound may exhibit similar thermal properties in comparison to the unsubstituted PBI. The PBI compound may exhibit a solubility in an organic solvent greater than the solubility of the unsubstituted PBI. The PBI compound may be included in separatory media. A substituted PBI synthesis method may include providing a parent PBI in a less than 5 wt % solvent solution. Substituting may occur at about room temperature and/or at about atmospheric pressure. Substituting may use at least 5 equivalents in relation to the imidazole nitrogens to be substituted or, preferably, about 15.

  20. New hydrolytically stable solvent for Am/Eu separation in acidic media

    SciTech Connect (OSTI)

    Smirnov, I.V.; Babain, V.A.; Chirkov, A.V.

    2007-07-01

    Americium and europium extraction by synergistic mixture of 2,6-bis(1-aryl-1H-tetrazol-5-yl)pyridines (ATP) - chlorinated cobalt dicarbollide (CCD) in polar diluent s from HNO{sub 3} media was studied. Meta-nitro-benzo-trifluoride, phenyl-tri-fluoro-methyl sulfone and 1,2-dichloroethane were used as diluents. The effect of diluent, composition of aqueous phase and substituent nature in aryl ring of ATPs on the extraction efficiency and selectivity of americium and europium separation was investigated. At the optimal ratio of nATP:CCD 1:1 the Am - Eu separation factor exceeded 90. Extraction of {sup 85}Sr, {sup 137}Cs and {sup 133}Ba was investigated and it was found that the mixture nATP-CCD provided the separation of Sr /Ba pair with a factor of 35. High resistance of 2,6-bisaryltetrazolyl pyridines to the action of nitric acid was demonstrated. (authors)

  1. Magnetic Recording Media Technology for the Tb/in2 Era"

    ScienceCinema (OSTI)

    Bertero, Gerardo [Western Digital

    2010-09-01

    Magnetic recording has been the technology of choice of massive storage of information. The hard-disk drive industry has recently undergone a major technological transition from longitudinal magnetic recording (LMR) to perpendicular magnetic recording (PMR). However, convention perpendicular recording can only support a few new product generations before facing insurmountable physical limits. In order to support sustained recording areal density growth, new technological paradigms, such as energy-assisted recording and bit-patterined media recording are being contemplated and planned. In this talk, we will briefly discuss the LMR-to-PMR transition, the extendibility of current PMR recording, and the nature and merits of new enabling technologies. We will also discuss a technology roadmap toward recording densities approaching 10 Tv/in2, approximately 40 times higher than in current disk drives.

  2. Flow and Containment Transport Code for Modeling Variably Saturated Porous Media

    Energy Science and Technology Software Center (OSTI)

    1998-05-14

    FACT is a finite element based code designed to model subsurface flow and contaminant transport. It was designed to perform transient three-dimensional calculations that simulate isothermal groundwater flow, moisture movement, and solute transport in variably saturated and fully saturated subsurface porous media. The code is designed specifically to handle complex multi-layer and/or heterogenous aquifer systems in an efficient manner and accommodates a wide range of boundary conditions. Additionally 1-D and 2-D (in Cartesian coordinates) problemsmore »are handled in FACT by simply limiting the number of elements in a particular direction(s) to one. The governing equations in FACT are formulated only in Cartesian coordinates. FACT writes out both ascii and graphical binary files that are TECPLOT-ready. Special features are also available within FACT for handling the typical groundwater modeling needs for remediation efforts at the Savannah River Site.« less

  3. Flow and Containment Transport Code for Modeling Variably Saturated Porous Media

    Energy Science and Technology Software Center (OSTI)

    1998-05-14

    FACT is a finite element based code designed to model subsurface flow and contaminant transport. It was designed to perform transient three-dimensional calculations that simulate isothermal groundwater flow, moisture movement, and solute transport in variably saturated and fully saturated subsurface porous media. The code is designed specifically to handle complex multi-layer and/or heterogenous aquifer systems in an efficient manner and accommodates a wide range of boundary conditions. Additionally 1-D and 2-D (in Cartesian coordinates) problemsmore » are handled in FACT by simply limiting the number of elements in a particular direction(s) to one. The governing equations in FACT are formulated only in Cartesian coordinates. FACT writes out both ascii and graphical binary files that are TECPLOT-ready. Special features are also available within FACT for handling the typical groundwater modeling needs for remediation efforts at the Savannah River Site.« less

  4. Fischer-Tropsch synthesis in supercritical reaction media. Progress report, January 1, 1993--March 31, 1993

    SciTech Connect (OSTI)

    Subramaniam, B.; Bochniak, D.; Snavely, K.

    1993-04-01

    The reactor configuration has been modified to handle tows both in the upflow and downflow directions. For comparison to bubble column operation, an upflow mode of operation will be used. For comparison to trickle-bed operation, a downflow mode will be employed. Thus, this modification allows the most flexibility for studying the effects of liquid and supercritical reaction media on the Fischer-Tropsch synthesis reaction and permits comparisons of our experimental results with previous work. A stainless steel reactor tube was ordered. This unit along with three other pieces of tubing (greater than 1/4in. i. d.) are to be sent to Alon Processing Co. for alonizing (passivating) the internal surface. This process had been employed by Huff and Satterfield (1983) to ensure that the stainless steel surfaces are catalytically inert at high temperatures (> 200{degree}C).

  5. Experimental Investigation of the Effective Foam Viscosity in Unsaturated Porous Media

    SciTech Connect (OSTI)

    Zhang, Z. F.; Zhong, Lirong; White, Mark D.; Szecsody, James E.

    2012-11-01

    Foam has the potential to effectively carry and distribute either aqueous or gaseous amendments to the deep vadose zone for contaminant remediation. However, the transport of foam in porous media is complicated because flow characteristics such as the effective viscosity are affected not only by foam properties but also by the sediment properties and flow conditions. We determined the average effective foam viscosity via a series of laboratory experiments and found that the effective foam viscosity increased with the liquid fraction in foam, the injection rate, and sediment permeability. These impacts are quantified with an empirical expression, which is further demonstrated with data from literature. The results show that the liquid fraction in foam and sediment permeability are two primary factors affecting effective foam viscosity. These results suggest that, when foam is used in deep vadose zone remediation, foam flow will not suffer from gravitational drainage and can distribute amendments uniformly in heterogeneous sediments.

  6. Smoothed Particle Hydrodynamics pore-scale simulations of unstable immiscible flow in porous media

    SciTech Connect (OSTI)

    Bandara, Dunusinghe Mudiyanselage Uditha C.; Tartakovsky, Alexandre M.; Oostrom, Martinus; Palmer, Bruce J.; Grate, Jay W.; Zhang, Changyong

    2013-12-01

    We have conducted a series of high-resolution numerical experiments using the Pair-Wise Force Smoothed Particle Hydrodynamics (PF-SPH) multiphase flow model. First, we derived analytical expressions relating parameters in the PF-SPH model to the surface tension and static contact angle. Next, we used the model to study viscous fingering, capillary fingering, and stable displacement of immiscible fluids in porous media for a wide range of capillary numbers and viscosity ratios. We demonstrated that the steady state saturation profiles and the boundaries of viscous fingering, capillary fingering, and stable displacement regions compare favorably with micromodel laboratory experimental results. For displacing fluid with low viscosity, we observed that the displacement pattern changes from viscous fingering to stable displacement with increasing injection rate. When a high viscosity fluid is injected, transition behavior from capillary fingering to stable displacement occurred as the flow rate was increased. These observation also agree with the results of the micromodel laboratory experiments.

  7. Methods, apparatuses, and computer-readable media for projectional morphological analysis of N-dimensional signals

    DOE Patents [OSTI]

    Glazoff, Michael V.; Gering, Kevin L.; Garnier, John E.; Rashkeev, Sergey N.; Pyt'ev, Yuri Petrovich

    2016-05-17

    Embodiments discussed herein in the form of methods, systems, and computer-readable media deal with the application of advanced "projectional" morphological algorithms for solving a broad range of problems. In a method of performing projectional morphological analysis, an N-dimensional input signal is supplied. At least one N-dimensional form indicative of at least one feature in the N-dimensional input signal is identified. The N-dimensional input signal is filtered relative to the at least one N-dimensional form and an N-dimensional output signal is generated indicating results of the filtering at least as differences in the N-dimensional input signal relative to the at least one N-dimensional form.

  8. Some mismatches occurred when simulating fractured reservoirs as homogeneous porous media

    SciTech Connect (OSTI)

    Mario Cesar Suarez Arriaga; Fernando Samaniego V.; Fernando Rodriguez

    1996-01-24

    The understanding of transport processes that occur in naturally fractured geothermal systems is far from being complete. Often, evaluation and numerical simulations of fractured geothermal reservoirs, are carried out by assuming equivalent porous media and homogeneous petrophysical properties within big matrix blocks. The purpose of this paper, is to present a comparison between results obtained from numerical studies of a naturally fractured reservoir treated as a simple porous medium and the simulation of some real aspects of the fractured reservoir. A general conclusion outlines the great practical importance of considering even approximately, the true nature of such systems. Our results show that the homogeneous simplified evaluation of the energy resource in a fractured system, could result in unrealistic estimates of the reservoir capacity to generate electricity.

  9. Development of RWHet to Simulate Contaminant Transport in Fractured Porous Media

    SciTech Connect (OSTI)

    Zhang, Yong; LaBolle, Eric; Reeves, Donald M; Russell, Charles

    2012-07-01

    Accurate simulation of matrix diffusion in regional-scale dual-porosity and dual-permeability media is a critical issue for the DOE Underground Test Area (UGTA) program, given the prevalence of fractured geologic media on the Nevada National Security Site (NNSS). Contaminant transport through regional-scale fractured media is typically quantified by particle-tracking based Lagrangian solvers through the inclusion of dual-domain mass transfer algorithms that probabilistically determine particle transfer between fractures and unfractured matrix blocks. UGTA applications include a wide variety of fracture aperture and spacing, effective diffusion coefficients ranging four orders of magnitude, and extreme end member retardation values. This report incorporates the current dual-domain mass transfer algorithms into the well-known particle tracking code RWHet [LaBolle, 2006], and then tests and evaluates the updated code. We also develop and test a direct numerical simulation (DNS) approach to replace the classical transfer probability method in characterizing particle dynamics across the fracture/matrix interface. The final goal of this work is to implement the algorithm identified as most efficient and effective into RWHet, so that an accurate and computationally efficient software suite can be built for dual-porosity/dual-permeability applications. RWHet is a mature Lagrangian transport simulator with a substantial user-base that has undergone significant development and model validation. In this report, we also substantially tested the capability of RWHet in simulating passive and reactive tracer transport through regional-scale, heterogeneous media. Four dual-domain mass transfer methodologies were considered in this work. We first developed the empirical transfer probability approach proposed by Liu et al. [2000], and coded it into RWHet. The particle transfer probability from one continuum to the other is proportional to the ratio of the mass entering the other continuum to the mass in the current continuum. Numerical examples show that this method is limited to certain ranges of parameters, due to an intrinsic assumption of an equilibrium concentration profile in the matrix blocks in building the transfer probability. Subsequently, this method fails in describing mass transfer for parameter combinations that violate this assumption, including small diffusion coefficients (i.e., the free-water molecular diffusion coefficient 110-11 meter2/second), relatively large fracture spacings (such as meter), and/or relatively large matrix retardation coefficients (i.e., ). These outliers in parameter range are common in UGTA applications. To address the above limitations, we then developed a Direct Numerical Simulation (DNS)-Reflective method. The novel DNS-Reflective method can directly track the particle dynamics across the fracture/matrix interface using a random walk, without any empirical assumptions. This advantage should make the DNS-Reflective method feasible for a wide range of parameters. Numerical tests of the DNS-Reflective, however, show that the method is computationally very demanding, since the time step must be very small to resolve particle transfer between fractures and matrix blocks. To improve the computational efficiency of the DNS approach, we then adopted Roubinet et al.s method [2009], which uses first passage time distributions to simulate dual-domain mass transfer. The DNS-Roubinet method was found to be computationally more efficient than the DNS-Reflective method. It matches the analytical solution for the whole range of major parameters (including diffusion coefficient and fracture aperture values that are considered outliers for Liu et al.s transfer probability method [2000]) for a single fracture system. The DNS-Roubinet method, however, has its own disadvantage: for a parallel fracture system, the truncation of the first passage time distribution creates apparent errors when the fracture spacing is small, and thus it tends to erroneously predict breakthrough curves (BTCs) for th

  10. Polybenzimidazole compounds, polymeric media, and methods of post-polymerization modifications

    DOE Patents [OSTI]

    Klaehn, John R. (Idaho Falls, ID); Peterson, Eric S. (Idaho Falls, ID); Orme, Christopher J. (Shelley, ID); Jones, Michael G. (Chubbuck, ID); Wertsching, Alan K. (Idaho Falls, ID); Luther, Thomas A. (Idaho Falls, ID); Trowbridge, Tammy L. (Idaho Falls, ID)

    2007-12-18

    A PBI compound includes imidazole nitrogens at least a portion of which are substituted with a moiety containing a carbonyl group, the substituted imidazole nitrogens being bonded to carbon of the carbonyl group. At least 85% of the nitrogens may be substituted. The carbonyl-containing moiety may include RCO--, where R is alkoxy or haloalkyl. The PBI compound may exhibit a first temperature marking an onset of weight loss corresponding to reversion of the substituted PBI that is less than a second temperature marking an onset of decomposition of an otherwise identical PBI compound without the substituted moiety. The PBI compound may be included in separatory media. A substituted PBI synthesis method may include providing a parent PBI in a less than 5 wt % solvent solution. Substituting may use more than 5 equivalents in relation to the imidazole nitrogens to be substituted.

  11. Text Stream Trend Analysis using Multiscale Visual Analytics with Applications to Social Media Systems

    SciTech Connect (OSTI)

    Steed, Chad A; Beaver, Justin M; BogenII, Paul L.; Drouhard, Margaret MEG G; Pyle, Joshua M

    2015-01-01

    In this paper, we introduce a new visual analytics system, called Matisse, that allows exploration of global trends in textual information streams with specific application to social media platforms. Despite the potential for real-time situational awareness using these services, interactive analysis of such semi-structured textual information is a challenge due to the high-throughput and high-velocity properties. Matisse addresses these challenges through the following contributions: (1) robust stream data management, (2) automated sen- timent/emotion analytics, (3) inferential temporal, geospatial, and term-frequency visualizations, and (4) a flexible drill-down interaction scheme that progresses from macroscale to microscale views. In addition to describing these contributions, our work-in-progress paper concludes with a practical case study focused on the analysis of Twitter 1% sample stream information captured during the week of the Boston Marathon bombings.

  12. Casimir force for absorbing media in an open quantum system framework: Scalar model

    SciTech Connect (OSTI)

    Lombardo, Fernando C.; Rubio Lopez, Adrian E.; Mazzitelli, Francisco D.

    2011-11-15

    In this article we compute the Casimir force between two finite-width mirrors at finite temperature, working in a simplified model in 1+1 dimensions. The mirrors, considered as dissipative media, are modeled by a continuous set of harmonic oscillators which in turn are coupled to an external environment at thermal equilibrium. The calculation of the Casimir force is performed in the framework of the theory of open quantum systems. It is shown that the Casimir interaction has two different contributions: the usual radiation pressure from the vacuum, which is obtained for ideal mirrors without dissipation or losses, and a Langevin force associated with the noise induced by the interaction between dielectric atoms in the slabs and the thermal bath. Both contributions to the Casimir force are needed in order to reproduce the analogous Lifshitz formula in 1+1 dimensions. We also discuss the relationship between the electromagnetic properties of the mirrors and the spectral density of the environment.

  13. Porous media experience applicable to field evaluation for compressed air energy storage

    SciTech Connect (OSTI)

    Allen, R.D.; Gutknecht, P.J.

    1980-06-01

    A survey is presented of porous media field experience that may aid in the development of a compressed air energy storage field demonstration. Work done at PNL and experience of other groups and related industries is reviewed. An overall view of porous media experience in the underground storage of fluids is presented. CAES experience consists of site evaluation and selection processes used by groups in California, Kansas, and Indiana. Reservoir design and field evaluation of example sites are reported. The studies raised questions about compatibility with depleted oil and gas reservoirs, storage space rights, and compressed air regulations. Related experience embraces technologies of natural gas, thermal energy, and geothermal and hydrogen storage. Natural gas storage technology lends the most toward compressed air storage development, keeping in mind the respective differences between stored fluids, physical conditions, and cycling frequencies. Both fluids are injected under pressure into an aquifer to form a storage bubble confined between a suitable caprock structure and partially displaced ground water. State-of-the-art information is summarized as the necessary foundation material for field planning. Preliminary design criteria are given as recommendations for basic reservoir characteristics. These include geometric dimensions and storage matrix properties such as permeability. Suggested ranges are given for injection air temperature and reservoir pressure. The second step in developmental research is numerical modeling. Results have aided preliminary design by analyzing injection effects upon reservoir pressure, temperature and humidity profiles. Results are reported from laboratory experiments on candidate sandstones and caprocks. Conclusions are drawn, but further verification must be done in the field.

  14. A Bloch-Torrey Equation for Diffusion in a Deforming Media

    SciTech Connect (OSTI)

    Rohmer, Damien; Gullberg, Grant T.

    2006-12-29

    Diffusion Tensor Magnetic Resonance Imaging (DTMRI)technique enables the measurement of diffusion parameters and therefore,informs on the structure of the biological tissue. This technique isapplied with success to the static organs such as brain. However, thediffusion measurement on the dynamically deformable organs such as thein-vivo heart is a complex problem that has however a great potential inthe measurement of cardiac health. In order to understand the behavior ofthe Magnetic Resonance (MR)signal in a deforming media, the Bloch-Torreyequation that leads the MR behavior is expressed in general curvilinearcoordinates. These coordinates enable to follow the heart geometry anddeformations through time. The equation is finally discretized andpresented in a numerical formulation using implicit methods, in order toget a stable scheme that can be applied to any smooth deformations.Diffusion process enables the link between the macroscopic behavior ofmolecules and themicroscopic structure in which they evolve. Themeasurement of diffusion in biological tissues is therefore of majorimportance in understanding the complex underlying structure that cannotbe studied directly. The Diffusion Tensor Magnetic ResonanceImaging(DTMRI) technique enables the measurement of diffusion parametersand therefore provides information on the structure of the biologicaltissue. This technique has been applied with success to static organssuch as the brain. However, diffusion measurement of dynamicallydeformable organs such as the in-vivo heart remains a complex problem,which holds great potential in determining cardiac health. In order tounderstand the behavior of the magnetic resonance (MR) signal in adeforming media, the Bloch-Torrey equation that defines the MR behavioris expressed in general curvilinear coordinates. These coordinates enableus to follow the heart geometry and deformations through time. Theequation is finally discretized and presented in a numerical formulationusing implicit methods in order to derive a stable scheme that can beapplied to any smooth deformations.

  15. Quadrature conductivity: A quantitative indicator of bacterial abundance in porous media

    SciTech Connect (OSTI)

    Chi Zhang; Andre Revil; Yoshiko Fujita; Junko Munakata-Marr; George Redden

    2014-09-01

    ABSTRACT The abundance and growth stages of bacteria in subsurface porous media affect the concentrations and distributions of charged species within the solid-solution interfaces. Therefore, spectral induced polarization (SIP) measurements can be used to monitor changes in bacterial biomass and growth stage. Our goal was to gain a better understanding of the SIP response of bacteria present in a porous material. Bacterial cell surfaces possess an electric double layer and therefore become polarized in an electric field. We performed SIP measurements over the frequency range of 0.11 kHz on cell suspensions alone and cell suspensions mixed with sand at four pore water conductivities. We used Zymomonas mobilis at four different cell densities (in- cluding the background). The quadrature conductivity spectra exhibited two peaks, one around 0.050.10 Hz and the other around 110 Hz. Because SIP measurements on bacterial suspensions are typically made at frequencies greater than 1 Hz, these peaks have not been previously reported. In the bac-terial suspensions in growth medium, the quadrature conduc-tivity at peak I was linearly proportional to the density of the bacteria. For the case of the suspensions mixed with sands, we observed that peak II presented a smaller increase in the quadrature conductivity with the cell density. A comparison of the experiments with and without sand grains illustrated the effect of the porous medium on the overall quadrature con- ductivity response (decrease in the amplitude and shift of the peaks to the lower frequencies). Our results indicate that for a given porous medium, time-lapse SIP has potential for mon- itoring changes in bacterial abundance within porous media.

  16. Experimentally Measured Interfacial Area during Gas Injection into Saturated Porous Media: An Air Sparging Analogy

    SciTech Connect (OSTI)

    Crandall, Dustin; Ahmadi, Goodarz; Smith, Duane H., Bromhal, Grant

    2010-01-01

    The amount of interfacial area (awn) between air and subsurface liquids during air-sparging can limit the rate of site remediation. Lateral movement within porous media could be encountered during air-sparging operations when air moves along the bottom of a low-permeability lens. This study was conducted to directly measure the amount of awn between air and water flowing within a bench-scale porous flow cell during the lateral movement of air along the upper edge of the cell during air injections into an initially water-saturated flow cell. Four different cell orientations were used to evaluate the effect of air injection rates and porous media geometries on the amount of awn between fluids. Air was injected at flow rates that varied by three orders of magnitude, and for each flow cellover this range of injection rates little change in awn was noted. A wider variation in awn was observed when air moved through different regions for the different flow cell orientations. These results are in good agreement with the experimental findings of Waduge et al. (2007), who performed experiments in a larger sand-pack flow cell, and determined that air-sparging efficiency is nearly independent of flow rate but highly dependent on the porous structure. By directly measuring the awn, and showing that awn does not vary greatly with changes in injection rate, we show that the lack of improvement to remediation rates is because there is a weak dependence of the awn on the air injection rate.

  17. Lattice Boltzmann simulation of immiscible fluid displacement in porous media: Homogeneous versus heterogeneous pore network

    SciTech Connect (OSTI)

    Liu, Haihu; Zhang, Yonghao; Valocchi, Albert J.

    2015-05-15

    Injection of anthropogenic carbon dioxide (CO{sub 2}) into geological formations is a promising approach to reduce greenhouse gas emissions into the atmosphere. Predicting the amount of CO{sub 2} that can be captured and its long-term storage stability in subsurface requires a fundamental understanding of multiphase displacement phenomena at the pore scale. In this paper, the lattice Boltzmann method is employed to simulate the immiscible displacement of a wetting fluid by a non-wetting one in two microfluidic flow cells, one with a homogeneous pore network and the other with a randomly heterogeneous pore network. We have identified three different displacement patterns, namely, stable displacement, capillary fingering, and viscous fingering, all of which are strongly dependent upon the capillary number (Ca), viscosity ratio (M), and the media heterogeneity. The non-wetting fluid saturation (S{sub nw}) is found to increase nearly linearly with logCa for each constant M. Increasing M (viscosity ratio of non-wetting fluid to wetting fluid) or decreasing the media heterogeneity can enhance the stability of the displacement process, resulting in an increase in S{sub nw}. In either pore networks, the specific interfacial length is linearly proportional to S{sub nw} during drainage with equal proportionality constant for all cases excluding those revealing considerable viscous fingering. Our numerical results confirm the previous experimental finding that the steady state specific interfacial length exhibits a linear dependence on S{sub nw} for either favorable (M ? 1) or unfavorable (M < 1) displacement, and the slope is slightly higher for the unfavorable displacement.

  18. REE Sorption Study of Sieved -50 +100 mesh Media #1 in Brine #1 with Different Starting pH's at 70C

    SciTech Connect (OSTI)

    Gary Garland

    2015-07-21

    This dataset described shaker table experiments ran with sieved -50 +100 mesh media #1 in brine #1 that have 2ppm each of the 7 REE metals at different starting pH's of 3.5, 4.5, and 5.5. The experimental conditions are 2g media to 150mL of REE solution, at 70C.

  19. THREE-DIMENSIONAL THERMAL MODELING ANALYSIS OF CST MEDIA FOR THE SMALL ION EXCHANGE PROJECT

    SciTech Connect (OSTI)

    Lee, S.; King, W.

    2011-09-12

    The Small Column Ion Exchange (SCIX) project is designed to accelerate closure of High Level Waste (HLW) tanks at the Savannah River Site (SRS). The SRS tanks store HLW in three forms: sludge, saltcake, and supernate. An in-tank ion exchange process is being designed to treat supernate and dissolved saltcake waste. Through this process, radioactive cesium from the salt solution is adsorbed into Crystalline Silicotitanate (CST) ion exchange media packed within a flow-through column. A packed column loaded with radioactive cesium generates significant heat from radiolytic decay. The waste supernate solution within the ion exchange bed will boil around 120 C. Solution superheating above the boiling point within the column could lead to violent hazardous energy releases. System heating from loaded CST is also of concern in other process modules, such as the waste tank. Due to tank structural integrity concerns, the wall temperature limit for the SRS waste tanks is 100 C. The transfer of cesium-loaded CST to the tank could result in localized hot spots on the tank floor and walls which may exceed this limit. As a result, thermal modeling calculations have been conducted to predict the maximum temperatures achievable both in the column and in the waste tank. As specified in the associated Technical Task Plan, one objective of the present work was to compute temperature distributions within the ion exchange column module under accident scenarios including loss of salt solution flow through the bed and loss of coolant system flow. The column modeling domain and the scope of the calculations in this case were broadened relative to previous two-dimensional calculations to include vertical temperature distributions within the packed bed of ion exchange media as well as the upper column plenum region containing only fluid. The baseline design conditions and in-column modeling domain for the ion-exchange column module are shown in Figure 1. These evaluations assumed the maximum bounding cesium loading considered possible based on current knowledge regarding CST media and the anticipated feed compositions. Since this cesium loading was considerably higher than the nominal loading conditions in SRS waste, cases with lower loading were also evaluated. Modeling parameters were the same as those used previously unless otherwise indicated. The current model does not capture multi-phase cooling mechanisms operative when solution boiling occurs. This feature is conservative in the sense that it does not account for the large cooling effects associated with phase transfer. However, the potential transfer of heat to the plenum region associated with vertical bubble ascension through the column during boiling is also neglected. Thermal modeling calculations were also performed for the entire waste storage tank for the case where loaded and ground CST was transferred to the tank. The modeling domain used for the in-tank calculations is provided in Figure 2. The in-tank domain is based on SRS Tank 41, which is a Type-IIIA tank. Temperature distributions were evaluated for cylindrical, ground CST mounds located on the tank floor. Media grinding is required prior to vitrification processing of the CST in the SRS Defense Waste Processing Facility (DWPF). The location of the heat source region on the tank floor due to the accumulation of CST material was assumed to be just under the grinder. The shape of the CST mound was assumed to be cylindrical. This shape is believed to be most representative of the actual mound shape formed in the tank, given that submersible mixing pumps will be available for media dispersion. Alternative configurations involving other geometrical shapes for the CST mound were evaluated in the previous work. Sensitivity analysis for the in-tank region was performed for different amounts of CST media. As was the case for the in-column model, the in-tank model does not include multi-phase cooling mechanisms operative when solution boiling occurs. The in-column and the in-tank evaluations incorporated recently updated maximum cesium loading levels calculated using the current SCIX feed compositions, which resulted in significantly higher cesium loading than previously calculated. The calculations were conducted to ensure conservative predictions for the maximum temperatures achievable using the current baseline design. The degree of conservatism was reduced for in-column calculations relative to the previous work by using a three-dimensional modeling approach and selecting parameters which were nearer to expected conditions. The degree of conservatism for the in-tank calculations was also reduced by lowering the soil penetration depth below the tank from 150 to 20 feet. The primary goals of the extended thermal modeling effort were to determine whether fluid boiling or superheating are possible within the column module and to determine the maximum floor temperatures within the tank loaded with spent CST.

  20. Secretary of Energy Ernest Moniz to Host Media Briefing on Energy Department’s Fiscal Year 2016 Budget Request

    Broader source: Energy.gov [DOE]

    On Monday, February 2, 2015, U.S. Department of Energy Secretary Ernest Moniz will host a media briefing on the Energy Department’s Fiscal Year 2016 Budget Request, outlining the Department’s proposed investments in research, infrastructure, and an all-of-the-above energy strategy.

  1. f-Element Ion Chelation in Highly Basic Media - Final Report

    SciTech Connect (OSTI)

    Paine, R.T.

    2000-12-12

    A large body of data has been collected over the last fifty years on the chemical behavior of f-element ions. The ions undergo rapid hydrolysis reactions in neutral or basic aqueous solutions that produce poorly understood oxide-hydroxide species; therefore, most of the fundamental f-element solution chemistry has allowed synthetic and separations chemists to rationally design advanced organic chelating ligands useful for highly selective partitioning and separation of f-element ions from complex acidic solution matrices. These ligands and new examples under development allow for the safe use and treatment of solutions containing highly radioactive species. This DOE/EMSP project was undertaken to address the following fundamental objectives: (1) study the chemical speciation of Sr and lanthanide (Ln) ions in basic aqueous media containing classical counter anions found in waste matrices; (2) prepare pyridine N-oxide phosphonates and phosphonic acids that might act as selective chelator s for Ln ions in model basic pH waste streams; (3) study the binding of the new chelators toward Ln ions and (4) examine the utility of the chelators as decontamination and dissolution agents under basic solution conditions. The project has been successful in attacking selected aspects of the very difficult problems associated with basic pH solution f-element waste chemistry. In particular, the project has (1) shed additional light on the initial stages of Ln ion sol-gel-precipitate formulation under basic solution conditions; (2) generated new families of pyridine phosphonic acid chelators; (3) characterized the function of the chelators and (4) examined their utility as oxide-hydroxide dissolution agents. These findings have contributed significantly to an improved understanding of the behavior of Ln ions in basic media containing anions found in typical waste sludges as well as to the development of sludge dissolution agents. The new chelating reagents are easily made and could be prepared in quantities suitable for large scale decontamination and dissolution processes involving sludges. Further studies will be required to assess specific performance in actinide ion bearing wastes.

  2. Non-destructive in-situ method and apparatus for determining radionuclide depth in media

    DOE Patents [OSTI]

    Xu, X. George; Naessens, Edward P.

    2003-01-01

    A non-destructive method and apparatus which is based on in-situ gamma spectroscopy is used to determine the depth of radiological contamination in media such as concrete. An algorithm, Gamma Penetration Depth Unfolding Algorithm (GPDUA), uses point kernel techniques to predict the depth of contamination based on the results of uncollided peak information from the in-situ gamma spectroscopy. The invention is better, faster, safer, and/cheaper than the current practice in decontamination and decommissioning of facilities that are slow, rough and unsafe. The invention uses a priori knowledge of the contaminant source distribution. The applicable radiological contaminants of interest are any isotopes that emit two or more gamma rays per disintegration or isotopes that emit a single gamma ray but have gamma-emitting progeny in secular equilibrium with its parent (e.g., .sup.60 Co, .sup.235 U, and .sup.137 Cs to name a few). The predicted depths from the GPDUA algorithm using Monte Carlo N-Particle Transport Code (MCNP) simulations and laboratory experiments using .sup.60 Co have consistently produced predicted depths within 20% of the actual or known depth.

  3. Nonlinear dynamics in flow through unsaturated fractured-porous media: Status and perspectives

    SciTech Connect (OSTI)

    Faybishenko, Boris

    2002-11-27

    The need has long been recognized to improve predictions of flow and transport in partially saturated heterogeneous soils and fractured rock of the vadose zone for many practical applications, such as remediation of contaminated sites, nuclear waste disposal in geological formations, and climate predictions. Until recently, flow and transport processes in heterogeneous subsurface media with oscillating irregularities were assumed to be random and were not analyzed using methods of nonlinear dynamics. The goals of this paper are to review the theoretical concepts, present the results, and provide perspectives on investigations of flow and transport in unsaturated heterogeneous soils and fractured rock, using the methods of nonlinear dynamics and deterministic chaos. The results of laboratory and field investigations indicate that the nonlinear dynamics of flow and transport processes in unsaturated soils and fractured rocks arise from the dynamic feedback and competition between various nonlinear physical processes along with complex geometry of flow paths. Although direct measurements of variables characterizing the individual flow processes are not technically feasible, their cumulative effect can be characterized by analyzing time series data using the models and methods of nonlinear dynamics and chaos. Identifying flow through soil or rock as a nonlinear dynamical system is important for developing appropriate short- and long-time predictive models, evaluating prediction uncertainty, assessing the spatial distribution of flow characteristics from time series data, and improving chemical transport simulations. Inferring the nature of flow processes through the methods of nonlinear dynamics could become widely used in different areas of the earth sciences.

  4. Mathematical model of steam drying of wood chips and other hygroscopic porous media

    SciTech Connect (OSTI)

    Fyhr, C.; Rasmuson, A.

    1996-09-01

    A model is presented that is focused on the drying kinetics of single wood chips as a function of time and external conditions, such as temperature, pressure and velocity of the superheated steam. A multiphase and 2-D approach was used to model the coupled transport of water, vapor, air and heat in anisotropic hygroscopic porous media. The model was verified by drying experiments where measurements of the average moisture content, center temperature and pressure in a single wood chip could be performed simultaneously. A comparison between the calculations and the measurements showed that the drying behavior was well predicted. The drying can be divided into three stages: a heat-up period when condensation on the surface initially increases the moisture content; a period of constant drying rate when the external heat transfer controls the drying rate; and a period of decreasing drying rate when the drying is controlled by internal mass transfer. Many interesting features of the drying could be assigned to the strong anisotropicity of wood, which makes a 2-D model necessary.

  5. Polymeric media comprising polybenzimidazoles N-substituted with organic-inorganic hybrid moiety

    DOE Patents [OSTI]

    Klaehn, John R. [Idaho Falls, ID; Peterson, Eric S. [Idaho Falls, ID; Wertsching, Alan K. [Idaho Falls, ID; Orme, Christopher J. [Shelley, ID; Luther, Thomas A. [Idaho Falls, ID; Jones, Michael G. [Pocatello, ID

    2009-12-15

    A PBI compound includes imidazole nitrogens at least a portion of which are substituted with an organic-inorganic hybrid moiety may be included in a separator medium. At least 85% of the imidazole nitrogens may be substituted. The organic-inorganic hybrid moiety may be an organosilane moiety, for example, (R)Me.sub.2SiCH.sub.2-- where R is selected from among methyl, phenyl, vinyl, and allyl. The separatory medium may exhibit an H.sub.2, Ar, N.sub.2, O.sub.2, CH.sub.3, or CO.sub.2 gas permeability greater than the gas permeability of a comparable separatory medium comprising the PBI compound without substitution. The separatory medium may further include an electronically conductive medium and/or ionically conductive medium. The separatory medium may be used as a membrane (semi-permeable, permeable, and non-permeable), a barrier, an ion exhcange media, a filter, a gas chromatography coating (such as stationary phase coating in affinity chromatography), etc.

  6. Methods, media, and systems for detecting attack on a digital processing device

    DOE Patents [OSTI]

    Stolfo, Salvatore J.; Li, Wei-Jen; Keromylis, Angelos D.; Androulaki, Elli

    2014-07-22

    Methods, media, and systems for detecting attack are provided. In some embodiments, the methods include: comparing at least part of a document to a static detection model; determining whether attacking code is included in the document based on the comparison of the document to the static detection model; executing at least part of the document; determining whether attacking code is included in the document based on the execution of the at least part of the document; and if attacking code is determined to be included in the document based on at least one of the comparison of the document to the static detection model and the execution of the at least part of the document, reporting the presence of an attack. In some embodiments, the methods include: selecting a data segment in at least one portion of an electronic document; determining whether the arbitrarily selected data segment can be altered without causing the electronic document to result in an error when processed by a corresponding program; in response to determining that the arbitrarily selected data segment can be altered, arbitrarily altering the data segment in the at least one portion of the electronic document to produce an altered electronic document; and determining whether the corresponding program produces an error state when the altered electronic document is processed by the corresponding program.

  7. Modeling and laboratory investigations of microbial oil recovery mechanisms in porous media

    SciTech Connect (OSTI)

    Chang, M.M.; Bryant, R.S.; Stepp, A.K.; Bertus, K.M.

    1992-12-01

    Simulation and experimental results on the transport of microbes and nutrients in one-dimensional cores are presented, and the development of a three-dimensional, three-phase, multiple-component numerical model to describe the microbial transport and oil recovery in porous media is described. The change of rock`s wettability and associated relative permeability values after microbial treatments were accounted for in the model for additional oil recovery. Porosity and permeability reductions due to cell clogging have been considered and the production of gas by microbial metabolism has been incorporated. Governing equations for microbial and nutrient transport are coupled with continuity and flow equations under conditions appropriate for a black oil reservoir. The computer simulator has been used to determine the effects of various transport parameters on microbial transport phenomena. The model can accurately describe the observed transport of microbes, nutrients, and metabolites in coreflooding experiments. Input parameters are determined by matching laboratory experimental results. The model can be used to predict the propagation of microbes and nutrients in a model reservoir and to optimize injection strategies. Optimization of injection strategy results in increased oil recovery due to improvements in sweep efficiency. Field-scale numerical simulation studies using data from relative permeability experiments indicated that microbial treatment could improve oil recovery over waterflooding alone. This report addresses the work conducted under project BE3 of the FY92 annual plan.

  8. Modeling and laboratory investigations of microbial oil recovery mechanisms in porous media

    SciTech Connect (OSTI)

    Chang, M.M.; Bryant, R.S.; Stepp, A.K.; Bertus, K.M.

    1992-12-01

    Simulation and experimental results on the transport of microbes and nutrients in one-dimensional cores are presented, and the development of a three-dimensional, three-phase, multiple-component numerical model to describe the microbial transport and oil recovery in porous media is described. The change of rock's wettability and associated relative permeability values after microbial treatments were accounted for in the model for additional oil recovery. Porosity and permeability reductions due to cell clogging have been considered and the production of gas by microbial metabolism has been incorporated. Governing equations for microbial and nutrient transport are coupled with continuity and flow equations under conditions appropriate for a black oil reservoir. The computer simulator has been used to determine the effects of various transport parameters on microbial transport phenomena. The model can accurately describe the observed transport of microbes, nutrients, and metabolites in coreflooding experiments. Input parameters are determined by matching laboratory experimental results. The model can be used to predict the propagation of microbes and nutrients in a model reservoir and to optimize injection strategies. Optimization of injection strategy results in increased oil recovery due to improvements in sweep efficiency. Field-scale numerical simulation studies using data from relative permeability experiments indicated that microbial treatment could improve oil recovery over waterflooding alone. This report addresses the work conducted under project BE3 of the FY92 annual plan.

  9. An Experimental Investigation of Foam Flow in Homogeneous and Heterogeneous Porous Media, SUPRI TR-112

    SciTech Connect (OSTI)

    Apaydin, Osman G.; Bertin, Henri; Castanier, Louis M.; Kovscek, Anthony R.

    1999-08-09

    Foam is used to reduce the high mobility of gas-drive fluids and improve the contact between oil and these injected fluids. We require a better understanding of the effect of surfactant concentration on foam flow in porous media. Besides this, the literature on foam flow and transport in heterogeneous systems is sparse although the field situation is primarily heterogeneous and multidimensional. In this study, foam flow experiments were conducted first in homogeneous sand packs to investigate the effect of surfactant concentration on foam flow and then a heterogeneous experimental setup was prepared to observe heterogeneity and multidimensional flow effects on foam propagation. The homogeneous core experiments were conducted in a cylindrical aluminum core holder that was packed with a uniform Ottawa sand. Sand permeability is about 7.0 Darcy. The experiments were interpreted in terms of evolution of in-situ water saturation as a function of time by the usage of CT scanner, cumulative water, and pressure drop across the core. At very low surfactant concentration, no significant benefit was observed. But when stable foam generation started sweep efficiency (water recovery), breakthrough time, and pressure drop increased as surfactant concentration increased.

  10. Comparison of kinetic and equilibrium reaction models insimulating gas hydrate behavior in porous media

    SciTech Connect (OSTI)

    Kowalsky, Michael B.; Moridis, George J.

    2006-11-29

    In this study we compare the use of kinetic and equilibriumreaction models in the simulation of gas (methane) hydrate behavior inporous media. Our objective is to evaluate through numerical simulationthe importance of employing kinetic versus equilibrium reaction modelsfor predicting the response of hydrate-bearing systems to externalstimuli, such as changes in pressure and temperature. Specifically, we(1) analyze and compare the responses simulated using both reactionmodels for natural gas production from hydrates in various settings andfor the case of depressurization in a hydrate-bearing core duringextraction; and (2) examine the sensitivity to factors such as initialhydrate saturation, hydrate reaction surface area, and numericaldiscretization. We find that for large-scale systems undergoing thermalstimulation and depressurization, the calculated responses for bothreaction models are remarkably similar, though some differences areobserved at early times. However, for modeling short-term processes, suchas the rapid recovery of a hydrate-bearing core, kinetic limitations canbe important, and neglecting them may lead to significantunder-prediction of recoverable hydrate. The use of the equilibriumreaction model often appears to be justified and preferred for simulatingthe behavior of gas hydrates, given that the computational demands forthe kinetic reaction model far exceed those for the equilibrium reactionmodel.

  11. Method and apparatus for optical Doppler tomographic imaging of fluid flow velocity in highly scattering media

    DOE Patents [OSTI]

    Nelson, John Stuart; Milner, Thomas Edward; Chen, Zhongping

    1999-01-01

    Optical Doppler tomography permits imaging of fluid flow velocity in highly scattering media. The tomography system combines Doppler velocimetry with high spatial resolution of partially coherent optical interferometry to measure fluid flow velocity at discrete spatial locations. Noninvasive in vivo imaging of blood flow dynamics and tissue structures with high spatial resolutions of the order of 2 to 10 microns is achieved in biological systems. The backscattered interference signals derived from the interferometer may be analyzed either through power spectrum determination to obtain the position and velocity of each particle in the fluid flow sample at each pixel, or the interference spectral density may be analyzed at each frequency in the spectrum to obtain the positions and velocities of the particles in a cross-section to which the interference spectral density corresponds. The realized resolutions of optical Doppler tomography allows noninvasive in vivo imaging of both blood microcirculation and tissue structure surrounding the vessel which has significance for biomedical research and clinical applications.

  12. Two-photon fluorescence microscopy signal formation in highly scattering media: theoretical and numerical simulation

    SciTech Connect (OSTI)

    Sergeeva, Ekaterina A; Katichev, A R; Kirillin, M Yu

    2011-01-24

    Using the radiative transfer theory and Monte Carlo simulations, we analyse the effect of scattering in a medium and of the size of the detector pinhole on the formation of the fluorescent signal in standard two-photon fluorescence microscopy (TPFM) systems. The theoretical analysis is based on a small-angle diffusion approximation of the radiative transfer equation, adapted to calculate the propagation of focused infrared radiation in media similar to the biological tissues in their optical properties. The accuracy of the model is evaluated by comparing the calculated excitation intensity in a highly scattering medium with the results of Monte Carlo simulations. To simulate a tightly focused Gaussian beam by the Monte Carlo method, the so called 'ray-optics' approach that correctly takes into account the finite size and shape of the beam waist is applied. It is shown that in the combined confocal and two-photon scanning microscopy systems not equipped with an external 'nondescanned' detector, the scattering significantly affects both the nonlinear excitation efficiency in the medium and the fluorescence collection efficiency of the system. In such systems, the rate of the useful TPFM signal in-depth decay is 1.5 - 2 times higher than in systems equipped with a 'nondescanned' detector. (application of lasers and laser-optical methods in life sciences)

  13. Para-nitrobenzyl esterases with enhanced activity in aqueous and nonaqueous media

    DOE Patents [OSTI]

    Arnold, Frances H.; Moore, Jeffrey C.

    1999-01-01

    A method for isolating and identifying modified para-nitrobenzyl esterases which exhibit improved stability and/or esterase hydrolysis activity toward selected substrates and under selected reaction conditions relative to the unmodified para-nitrobenzyl esterase. The method involves preparing a library of modified para-nitrobenzyl esterase nucleic acid segments (genes) which have nucleotide sequences that differ from the nucleic acid segment which encodes for unmodified para-nitrobenzyl esterase. The library of modified para-nitrobenzyl nucleic acid segments is expressed to provide a plurality of modified enzymes. The clones expressing modified enzymes are then screened to identify which enzymes have improved esterase activity by measuring the ability of the enzymes to hydrolyze the selected substrate under the selected reaction conditions. Specific modified para-nitrobenzyl esterases are disclosed which have improved stability and/or ester hydrolysis activity in aqueous or aqueous-organic media relative to the stability and/or ester hydrolysis activity of unmodified naturally occurring para-nitrobenzyl esterase.

  14. Para-nitrobenzyl esterases with enhanced activity in aqueous and nonaqueous media

    DOE Patents [OSTI]

    Arnold, Frances H.; Moore, Jeffrey C.

    1998-01-01

    A method for isolating and identifying modified para-nitrobenzyl esterases which exhibit improved stability and/or esterase hydrolysis activity toward selected substrates and under selected reaction conditions relative to the unmodified para-nitrobenzyl esterase. The method involves preparing a library of modified para-nitrobenzyl esterase nucleic acid segments (genes) which have nucleotide sequences that differ from the nucleic acid segment which encodes for unmodified para-nitrobenzyl esterase. The library of modified para-nitrobenzyl nucleic acid segments is expressed to provide a plurality of modified enzymes. The clones expressing modified enzymes are then screened to identify which enzymes have improved esterase activity by measuring the ability of the enzymes to hydrolyze the selected substrate under the selected reaction conditions. Specific modified para-nitrobenzyl esterases are disclosed which have improved stability and/or ester hydrolysis activity in aqueous or aqueous-organic media relative to the stability and/or ester hydrolysis activity of unmodified naturally occurring para-nitrobenzyl esterase.

  15. A hybrid transport-diffusion model for radiative transfer in absorbing and scattering media

    SciTech Connect (OSTI)

    Roger, M.; Caliot, C.; Crouseilles, N.; Coelho, P.J.

    2014-10-15

    A new multi-scale hybrid transport-diffusion model for radiative transfer is proposed in order to improve the efficiency of the calculations close to the diffusive regime, in absorbing and strongly scattering media. In this model, the radiative intensity is decomposed into a macroscopic component calculated by the diffusion equation, and a mesoscopic component. The transport equation for the mesoscopic component allows to correct the estimation of the diffusion equation, and then to obtain the solution of the linear radiative transfer equation. In this work, results are presented for stationary and transient radiative transfer cases, in examples which concern solar concentrated and optical tomography applications. The Monte Carlo and the discrete-ordinate methods are used to solve the mesoscopic equation. It is shown that the multi-scale model allows to improve the efficiency of the calculations when the medium is close to the diffusive regime. The proposed model is a good alternative for radiative transfer at the intermediate regime where the macroscopic diffusion equation is not accurate enough and the radiative transfer equation requires too much computational effort.

  16. Bit patterned media optimization at 1 Tdot/in{sup 2} by post-annealing

    SciTech Connect (OSTI)

    Hellwig, Olav; Marinero, Ernesto E.; Kercher, Dan; Hennen, Tyler; McCallum, Andrew; Dobisz, Elizabeth; Wu, Tsai-Wei; Lille, Jeff; Hirano, Toshiki; Ruiz, Ricardo; Grobis, Michael K.; Weller, Dieter; Albrecht, Thomas R.

    2014-09-28

    We report on the fabrication of 1 Tdot/in{sup 2} bit patterned media with high coercivity (H{sub C}) and narrow intrinsic switching field distribution (iSFD) based on nanoimprint from a master pattern formed by e-beam guided block copolymer assembly onto a carbon hard mask and subsequent pattern transfer via etching into a thin CoCrPt perpendicular anisotropy recording layer. We demonstrate that an additional vacuum annealing step after pattern transfer into the CoCrPt layer and after Carbon hard mask removal not only yields recovery from undesired damage of the island edges, but actually transforms the islands into a magnetically more favorable compositional phase with higher H{sub C}, lower iSFD/H{sub C}, and three-fold increased thermal stability. Energy filtered transmission electron microscopy analysis reveals that the diffusion of Cr from the island cores to the periphery of the islands during post-annealing is responsible for the transformation of the magnetic bits into a more stable state.

  17. A model experiment to assess the effects of inclusions on wave propagation in soil media

    SciTech Connect (OSTI)

    Houston, Thomas W; Ray, Richard P

    2009-01-01

    A data acquisition system has been assembled using Micro-Electro-Mechanical Systems (MEMS) technology which provides a flexible data gathering capability to support recording accelerations at various locations within a sand filled 5 meter square test pit that has a depth extending into underlying gravelly soils. Dual-axis accelerometers weighing less than 1 gram each, made possible by advances in MEMS technology, are connected to up to 5 data acquisition (PXI modules) boards, each capable of controlling and recording data from 16 separate dual axis accelerometers. This data acquisition system is used to measure and record acceleration data from wave propagations that are generated by the impact of a hammer on a striker plate and are modified by an inclusion or occlusion buried in the soil media. Thirty-four two-axis accelerometers were placed at surface and embedded locations on either side of various inclusions buried in the test pit. This large number of accelerometers permits experimentally obtaining high quality spatial and temporal data that can describe the character of the generated wave-forms and the modification of those wave-forms caused by the inclusion. A number of differing materials and geometric forms are used to create inclusions in order to provide sufficient data to permit ascertaining the ability of the measurements to describe the character of the inclusion. Continuous Wavelet Transforms are used to remove background noise and to aid interpretation of the character of the generated wave-form.

  18. TRUST: A Computer Program for Variably Saturated Flow in Multidimensional, Deformable Media

    SciTech Connect (OSTI)

    Reisenauer, A. E.; Key, K. T.; Narasimhan, T. N.; Nelson, R. W.

    1982-01-01

    The computer code, TRUST. provides a versatile tool to solve a wide spectrum of fluid flow problems arising in variably saturated deformable porous media. The governing equations express the conservation of fluid mass in an elemental volume that has a constant volume of solid. Deformation of the skeleton may be nonelastic. Permeability and compressibility coefficients may be nonlinearly related to effective stress. Relationships between permeability and saturation with pore water pressure in the unsaturated zone may include hysteresis. The code developed by T. N. Narasimhan grew out of the original TRUNP code written by A. L. Edwards. The code uses an integrated finite difference algorithm for numerically solving the governing equation. Narching in time is performed by a mixed explicit-implicit numerical procedure in which the time step is internally controlled. The time step control and related feature in the TRUST code provide an effective control of the potential numerical instabilities that can arise in the course of solving this difficult class of nonlinear boundary value problem. This document brings together the equations, theory, and users manual for the code as well as a sample case with input and output.

  19. Does Water Content or Flow Rate Control Colloid Transport in Unsaturated Porous Media?

    SciTech Connect (OSTI)

    Thorsten Knappenberger; Markus Flury; Earl D. Mattson; James B. Harsh

    2014-03-01

    Mobile colloids can play an important role in contaminant transport in soils: many contaminants exist in colloidal form, and colloids can facilitate transport of otherwise immobile contaminants. In unsaturated soils, colloid transport is, among other factors, affected by water content and flow rate. Our objective was to determine whether water content or flow rate is more important for colloid transport. We passed negatively charged polystyrene colloids (220 nm diameter) through unsaturated sand-filled columns under steady-state flow at different water contents (effective water saturations Se ranging from 0.1 to 1.0, with Se = (? ?r)/(?s ?r)) and flow rates (pore water velocities v of 5 and 10 cm/min). Water content was the dominant factor in our experiments. Colloid transport decreased with decreasing water content, and below a critical water content (Se < 0.1), colloid transport was inhibited, and colloids were strained in water films. Pendular ring and water film thickness calculations indicated that colloids can move only when pendular rings are interconnected. The flow rate affected retention of colloids in the secondary energy minimum, with less colloids being trapped when the flow rate increased. These results confirm the importance of both water content and flow rate for colloid transport in unsaturated porous media and highlight the dominant role of water content.

  20. Transport and Retention of Engineered Nanoporous Particles in Porous Media: Effects of Concentration and Flow Dynamics

    SciTech Connect (OSTI)

    Shang, Jianying; Liu, Chongxuan; Wang, Zheming

    2013-01-20

    Engineered nanoporous particles are an important class of nano-structured materials that can be functionalized in their internal surfaces for various applications including groundwater contaminant sequestration. This paper reported a study of transport and retention of engineered nanoporous silicate particles (ENSPs) that are designed for treatment and remediation of contaminants such as uranium in groundwater and sediments. The transport and retention of ENSPs were investigated under variable particle concentrations and dynamic flow conditions in a synthetic groundwater that mimics field groundwater chemical composition. The dynamic flow condition was achieved using a flow-interruption (stop-flow) approach with variable stop-flow durations to explore particle retention and release kinetics. The results showed that the ENSPs transport was strongly affected by the particle concentrations and dynamic flow conditions. A lower injected ENSPs concentration and longer stop-flow duration led to a more particle retention. The experimental data were used to evaluate the applicability of various kinetic models that were developed for colloidal particle retention and release in describing ENSPs transport. Model fits suggested that the transport and retention of ENSPs were subjected to a complex coupling of reversible attachment/detachment and straining/liberation processes. Both experimental and modeling results indicated that dynamic groundwater flow condition is an important parameter to be considered in exploring and modeling engineered particle transport in subsurface porous media.

  1. Development of a coupled thermo-hydro-mechanical model in discontinuous media for carbon sequestration

    SciTech Connect (OSTI)

    Fang, Yilin; Nguyen, Ba Nghiep; Carroll, Kenneth C.; Xu, Zhijie; Yabusaki, Steven B.; Scheibe, Timothy D.; Bonneville, Alain

    2013-09-12

    Geomechanical alteration of porous media is generally ignored for most shallow subsurface applications, whereas CO2 injection, migration, and trapping in deep saline aquifers will be controlled by coupled multifluid flow, energy transfer, and geomechanical processes. The accurate assessment of the risks associated with potential leakage of injected CO2 and the design of effective injection systems requires that we represent these coupled processes within numerical simulators. The objectives of this study were to develop a coupled thermal-hydro-mechanical model into a single software, and to examine the coupling of thermal, hydrological, and geomechanical processes for simulation of CO2 injection into the subsurface for carbon sequestration. A numerical model is developed to couple nonisothermal multiphase hydrological and geomechanical processes for prediction of multiple interconnected processes for carbon sequestration in deep saline aquifers. The geomechanics model was based on Rigid Body-Spring Model (RBSM), one of the discrete methods to model discontinuous rock system. Poissons effect that was often ignored by RBSM was considered in the model. The simulation of large-scale and long-term coupled processes in carbon capture and storage projects requires large memory and computational performance. Global Array Toolkit was used to build the model to permit the high performance simulations of the coupled processes. The model was used to simulate a case study with several scenarios to demonstrate the impacts of considering coupled processes and Poissons effect for the prediction of CO2 sequestration.

  2. Evaluation of density separation and other treatment methods for plastic media blasting (PMB) waste

    SciTech Connect (OSTI)

    Spence, R.D.; Morgan, I.L.; Trotter, D.R.

    1995-05-01

    The United States Air Force has developed plastic media blasting (PMB) to replace solvent paint stripping of its aircraft. This paint blasting operation generates a waste stream of mainly pulverized plastic, but the stream also contains enough paint pigments to make the PMB waste RCRA hazardous. A Phase I study identified density separation as the preferred treatment alternative to land disposal of the entire PMB waste stream in a hazardous landfill. This study found density separation to be a less attractive alternative to self-encapsulation, solidification/stabilization (S/S), and low-temperature ashing. Self-encapsulation resulted in a volume decrease but only moderate improvement in Toxicity Characteristic Leaching Procedure (TCLP) performance Solidification/Stabilization (S/S) into cementiaous waste for resulted in excellent TCLP performances, but volume increases. Low-temperature ashing resulted in dramatic volume decreases, but off-gas control is required to contain all the RCRA metals. The resulting ash must be stabilized (e.g., S/S) to meet TCLP limits.

  3. What can granular media teach us about deformation in geothermal systems

    SciTech Connect (OSTI)

    Stephen L. Karner

    2004-06-01

    Experiments on granular media have significantly improved our understanding of deformation processes in porous rocks. Laboratory results have lead to fundamental theoretical developments (such as poroelasticity, or rate and state-variable friction) that have found widespread application. This paper presents results from laboratory experiments that help constrain these theories. Data from triaxial deformation experiments on quartz sand aggregates are used to illustrate stress-dependent behavior of poroelastic parameters (e.g. the Biot-Willis and Skempton coefficients). Calculations for these coefficients show systematic variations as effective stress increases, in a manner consistent with measured compressibilities of the aggregate. Data from shear experiments show that frictional strength varies systematically with time and temperature. At temperatures below 450 oC, shear zones exhibit greater cohesive strengths as the time of stationary contact increases (hence, positive healing rates). For conditions exceeding 450 oC, shear zone strength is seen to decrease with contact time (negative healing rates). The results from both volumetric compaction and frictional shear experiments are well described by poroelasticity as well as rate and state-variable friction. The combination of these constitutive relations may provide a powerful tool that can be used in numerical models that couple thermal, mechanical, hydraulic, and temporal processes as occur in geothermal systems.

  4. Para-nitrobenzyl esterases with enhanced activity in aqueous and nonaqueous media

    DOE Patents [OSTI]

    Arnold, F.H.; Moore, J.C.

    1999-05-25

    A method is disclosed for isolating and identifying modified para-nitrobenzyl esterases which exhibit improved stability and/or esterase hydrolysis activity toward selected substrates and under selected reaction conditions relative to the unmodified para-nitrobenzyl esterase. The method involves preparing a library of modified para-nitrobenzyl esterase nucleic acid segments (genes) which have nucleotide sequences that differ from the nucleic acid segment which encodes for unmodified para-nitrobenzyl esterase. The library of modified para-nitrobenzyl nucleic acid segments is expressed to provide a plurality of modified enzymes. The clones expressing modified enzymes are then screened to identify which enzymes have improved esterase activity by measuring the ability of the enzymes to hydrolyze the selected substrate under the selected reaction conditions. Specific modified para-nitrobenzyl esterases are disclosed which have improved stability and/or ester hydrolysis activity in aqueous or aqueous-organic media relative to the stability and/or ester hydrolysis activity of unmodified naturally occurring para-nitrobenzyl esterase. 43 figs.

  5. Para-nitrobenzyl esterases with enhanced activity in aqueous and nonaqueous media

    DOE Patents [OSTI]

    Arnold, F.H.; Moore, J.C.

    1998-04-21

    A method is disclosed for isolating and identifying modified para-nitrobenzyl esterases. These enzymes exhibit improved stability and/or esterase hydrolysis activity toward selected substrates and under selected reaction conditions relative to the unmodified para-nitrobenzyl esterase. The method involves preparing a library of modified para-nitrobenzyl esterase nucleic acid segments (genes) which have nucleotide sequences that differ from the nucleic acid segment which encodes for unmodified para-nitrobenzyl esterase. The library of modified para-nitrobenzyl nucleic acid segments is expressed to provide a plurality of modified enzymes. The clones expressing modified enzymes are then screened to identify which enzymes have improved esterase activity by measuring the ability of the enzymes to hydrolyze the selected substrate under the selected reaction conditions. Specific modified para-nitrobenzyl esterases are disclosed which have improved stability and/or ester hydrolysis activity in aqueous or aqueous-organic media relative to the stability and/or ester hydrolysis activity of unmodified naturally occurring para-nitrobenzyl esterase. 43 figs.

  6. Water as a promoter and catalyst for dioxygen electrochemistry in aqueous and organic media.

    SciTech Connect (OSTI)

    Staszak-Jirkovsky, Jakub; Subbaraman, Ram; Strmcnik, Dusan; Harrison, Katherine L.; Diesendruck, Charles E.; Assary, Rajeev; Frank, Otakar; Kobr, Lukas; Wiberg, Gustav K.H; Genorio, Bostjan; Connell, Justin G.; Lopes, Pietro P.; Stamenkovic, Vojislav R.; Curtiss, Larry; Moore, Jeffrey S.; Zavadil, Kevin R.; Markovic, Nenad M.

    2015-11-01

    Water and oxygen electrochemistry lies at the heart of interfacial processes controlling energy transformations in fuel cells, electrolyzers, and batteries. Here, by comparing results for the ORR obtained in alkaline aqueous media to those obtained in ultradry organic electrolytes with known amounts of H2O added intentionally, we propose a new rationale in which water itself plays an important role in determining the reaction kinetics. This effect derives from the formation of HOad center dot center dot center dot H2O (aqueous solutions) and LiO2 center dot center dot center dot H2O (organic solvents) complexes that place water in a configurationally favorable position for proton transfer to weakly adsorbed intermediates. We also find that, even at low concentrations (<10 ppm), water acts simultaneously as a promoter and as a catalyst in the production of Li2O2, regenerating itself through a sequence of steps that include the formation and recombination of H+ and OH-. We conclude that, although the binding energy between metal surfaces and oxygen intermediates is an important descriptor in electrocatalysis, understanding the role of water as a proton-donor reactant may explain many anomalous features in electrocatalysis at metal-liquid interfaces.

  7. Exact seismic velocities for VTI and HTI media and extendedThomsen Formulas for stronger anisotropies

    SciTech Connect (OSTI)

    Berryman, J.G.

    2007-05-14

    I explore a different type of approximation to the exactanisotropic wave velocities as a function of incidence angle invertically transversely isotropic (VTI) media. This method extends theThomsen weak anisotropy approach to stronger anisotropy withoutsignificantly affecting the simplicity of the formulas. One importantimprovement is that the peak of the quasi-SV-wave speed vsv(theta) islocated at the correct incidence angle theta= theta max, rather thanalways being at the position theta = 45o, which universally holds forThomsen's approximation although max theta = 45o is actually nevercorrect for any VTI anisotropic medium. The magnitudes of all the wavespeeds are also more closely approximated for all values of the incidenceangle. Furthermore, the value of theta max (which is needed in the newformulas) can be deduced from the same data that are typically used inthe weak anisotropy data analysis. The two examples presented are basedon systems having vertical fractures. The first set of model fractureshas their axes of symmetry randomly oriented in the horizontal plane.Such a system is then isotropic in the horizontal plane and, therefore,exhibits vertical transverse isotropic (VTI) symmetry. The second set offractures also has axes of symmetry in the horizontal plane, but it isassumed these axes are aligned so that the system exhibits horizontaltransverse isotropic (HTI) symmetry. Both types of systems are easilytreated with the new wave speed formulation.

  8. NUMERICAL MODELING OF CONTAMINANT TRANSPORT IN FRACTURED POROUS MEDIA USING MIXED FINITE ELEMENT AND FINITE VOLUME METHODS

    SciTech Connect (OSTI)

    Taylor, G.; Dong, C.; Sun, S.

    2010-03-18

    A mathematical model for contaminant species passing through fractured porous media is presented. In the numerical model, we combine two locally conservative methods, i.e. mixed finite element (MFE) and the finite volume methods. Adaptive triangle mesh is used for effective treatment of the fractures. A hybrid MFE method is employed to provide an accurate approximation of velocities field for both the fractures and matrix which are crucial to the convection part of the transport equation. The finite volume method and the standard MFE method are used to approximate the convection and dispersion terms respectively. The model is used to investigate the interaction of adsorption with transport and to extract information on effective adsorption distribution coefficients. Numerical examples in different fractured media illustrate the robustness and efficiency of the proposed numerical model.

  9. Laser-Doppler acoustic probing of granular media with in-depth property gradient and varying pore pressures

    SciTech Connect (OSTI)

    Bodet, L.; Dhemaied, A.; Mourgues, R.; Tournat, V.; Rejiba, F.

    2012-05-24

    Non-contacting ultrasonic techniques recently proved to be efficient in the physical modeling of seismic-wave propagation at various application scales, as for instance in the context of geological analogue and seismic modeling. An innovative experimental set-up is proposed here to perform laser-Doppler acoustic probing of unconsolidated granular media with varying pore pressures. The preliminary experiments presented here provide reproducible results and exploitable data, thus validating both the proposed medium preparation and pressure gradient generation procedure.

  10. Lagrangian simulations of unstable gravity-driven flow of fluids with variable density in randomly heterogeneous porous media

    SciTech Connect (OSTI)

    Tartakovsky, Alexandre M.

    2010-06-24

    A new Lagrangian particle model based on smoothed particle hydrodynamics (SPH) was developed and used to simulate Darcy scale flow and transport in porous media. The proposed numerical method has excellent conservation properties and treats advection exactly. The method was used in stochastic analysis of miscible density driven fluid flows. It was found that heterogeneity significantly increases dispersion and slows development of Rayleigh-Taylor instability. The presented numerical examples illustrate the advantages of Lagrangian methods for stochastic transport simulations.

  11. Media Contacts: Peter Bengtson, Washington Closure Hanford, (509) 372-9031, Peter.Bengtson@wch-rcc.com

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For Immediate Release: October 28, 2014 Media Contacts: Peter Bengtson, Washington Closure Hanford, (509) 372-9031, Peter.Bengtson@wch-rcc.com Cameron Hardy, DOE, (509) 376-5365, Cameron.Hardy@rl.doe.gov DOE, Washington Closure complete recycling project at Hanford About $400,000 saved by recycling electrical substation components in 300 Area RICHLAND, Wash. - The U.S. Department of Energy (DOE) recently teamed with contractor Washington Closure Hanford to complete a major recycling effort

  12. Microsoft Word - Final Contact Record 2014-01 ETPTS Media Removal Reconfiguration for Air Stripper 011014.doc

    Office of Legacy Management (LM)

    Contact Record 2014-01 ROCKY FLATS SITE REGULATORY CONTACT RECORD Purpose: East Trenches Plume Treatment System (ETPTS) media removal and reconfiguration for air stripper treatment Contact Record Approval Date: January 21, 2014 Site Contact(s)/Affiliation(s): Scott Surovchak, U.S. Department of Energy (DOE); John Boylan, Rick DiSalvo, Linda Kaiser, David Ward, S.M. Stoller Corporation (Stoller) Regulatory Contact(s)/Affiliation(s): Carl Spreng, Colorado Department of Public Health and

  13. XANES Speciation of P in Environmental Samples: An Assessment of Filter Media for on-Site Wastewater Treatment

    SciTech Connect (OSTI)

    Eveborn, D.; Gustafsson, J; Hesterberg, D; Hillier, S

    2009-01-01

    X-ray absorption near edge structure (XANES) spectroscopy is a useful technique for characterization of chemical species of phosphorus in complex environmental samples. To develop and evaluate bed filters as sustainable on-site wastewater treatment solutions, our objective in this study was to determine the chemical forms of accumulated phosphorus in a selection of promising filter materials: Filtralite P, Filtra P, Polonite, Absol, blast furnace slag, and wollastonite. Full-scale operational wastewater-treatment systems were sampled and in addition, filter samples collected from laboratory studies provided access to additional media and complementary samples. Phosphorus species were characterized using phosphorus K-edge XANES spectroscopy, complemented by X-ray powder diffraction (XRPD) and attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR). No systematic differences could be seen in the results between laboratory- and full-scale samples. All six filter media contained significant amounts of crystalline calcium phosphates. Some samples also contained amorphous calcium phosphate (>60% of total P in Absol). In Filtralite P and blast furnace slag, more than 35% of the accumulated phosphorus was associated with Fe or Al. Both the power and shortcomings of XANES analysis for characterizing P species in these filter media are discussed.

  14. Thermodynamic Model for Fluid-Fluid Interfacial Areas in Porous Media for Arbitrary Drainage-Imbibition Sequences

    SciTech Connect (OSTI)

    Schroth, Martin H.; Oostrom, Mart; Dobson, Richard; Zeyer, Josef

    2008-08-01

    Fluid/fluid interfacial areas are important in controlling the rate of mass and energy transfer between fluid phases in porous media. We present a modified thermodynamically based model (TBM) to predict fluid/fluid interfacial areas in porous media for arbitrary drainage/imbibition sequences. The TBM explicitly distinguishes between interfacial areas associated with continuous (free) and isolated (entrapped) nonwetting fluids. The model is restricted to two-fluid systems in which (1) no significant conversion of mechanical work into heat occurs, (2) the wetting fluid completely wets the porous mediums solid surfaces, and (3) no changes in interfacial area due to mass transfer between phases occur. We show example calculations for two different drainage/imbibition sequences in two porous media: a highly uniform silica sand and a well-graded silt. The TBMs predictions for interfacial area associated with free nonwetting-fluid are identical to those of a previously published geometry-based model (GBM). However, predictions for interfacial area associated with entrapped nonwetting-fluid are consistently larger in the TBM than in the GBM. Although a comparison of model predictions with experimental data is currently only possible to a limited extent, good general agreement was found for the TBM. As required model parameters are commonly used as inputs for or tracked during multifluid-flow simulations, the modified TBM may be easily incorporated in numerical codes.

  15. STOMP-ECKEChem: An Engineering Perspective on Reactive Transport in Geologic Media

    SciTech Connect (OSTI)

    White, Mark D.; Fang, Yilin

    2012-04-04

    ECKEChem (Equilibrium, Conservation, Kinetic Equation Chemistry) is a reactive transport module for the STOMP suite of multifluid subsurface flow and transport simulators that was developed from an engineering perspective. STOMP comprises a suite of operational modes that are distinguished by the solved coupled conservation equations with capabilities for a variety of subsurface applications (e.g., environmental remediation and stewardship, geologic sequestration of greenhouse gases, gas hydrate production, and oil shale production). The ECKEChem module was designed to provide integrated reactive transport capabilities across the suite of STOMP simulator operational modes. The initial application for the ECKEChem module was in the simulation of the mineralization reactions that occurred with the injection of supercritical carbon dioxide into deep Columbia River basalt formations, where it was implemented in the STOMP-CO2 simulator. The STOMP-ECKEChem solution approach to modeling reactive transport in multifluid geologic media is founded on an engineering perspective: (1) sequential non-iterative coupling between the flow and reactive transport is sufficient, (2) reactive transport can be modeled by operator splitting with local geochemistry and global transport, (3) geochemistry can be expressed as a system of coupled nonlinear equilibrium, conservation and kinetic equations, (4) a limited number of kinetic equation forms are used in geochemical practice. This chapter describes the conceptual approach to converting a geochemical reaction network into a series of equilibrium, conservation and kinetic equations, the implementation of ECKEChem in STOMP, the numerical solution approach, and a demonstration of the simulator on a complex application involving desorption of uranium from contaminated field-textured sediments.

  16. Physicochemical controls on absorbed water film thickness in unsaturated geological media

    SciTech Connect (OSTI)

    Tokunaga, T.

    2011-06-14

    Adsorbed water films commonly coat mineral surfaces in unsaturated soils and rocks, reducing flow and transport rates. Therefore, it is important to understand how adsorbed film thickness depends on matric potential, surface chemistry, and solution chemistry. Here, the problem of adsorbed water film thickness is examined through combining capillary scaling with the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Novel aspects of this analysis include determining capillary influences on film thicknesses, and incorporating solution chemistry-dependent electrostatic potential at air-water interfaces. Capillary analysis of monodisperse packings of spherical grains provided estimated ranges of matric potentials where adsorbed films are stable, and showed that pendular rings within drained porous media retain most of the 'residual' water except under very low matric potentials. Within drained pores, capillary contributions to thinning of adsorbed films on spherical grains are shown to be small, such that DLVO calculations for flat surfaces are suitable approximations. Hamaker constants of common soil minerals were obtained to determine ranges of the dispersion component to matric potential-dependent film thickness. The pressure component associated with electrical double layer forces was estimated using the compression and linear superposition approximations. The pH-dependent electrical double layer pressure component is the dominant contribution to film thicknesses at intermediate values of matric potential, especially in lower ionic strength solutions (< 10 mol m{sup -3}) on surfaces with higher magnitude electrostatic potentials (more negative than - 50 mV). Adsorbed water films are predicted to usually range in thickness from 1 to 20 nm in drained pores and fractures of unsaturated environments.

  17. Averaged Description of Flow (Steady and Transient) and Nonreactive Solute Transport in Random Porous Media

    SciTech Connect (OSTI)

    Schvidler, M.; Karasaki, K.

    2011-06-15

    In previous papers (Shvidler and Karasaki, 1999, 2001, 2005, and 2008) we presented and analyzed an approach for finding the general forms of exactly averaged equations of flow and transport in porous media. We studied systems of basic equations for steady flow with sources in unbounded domains with stochastically homogeneous conductivity fields. A brief analysis of exactly averaged equations of nonsteady flow and nonreactive solute transport was also presented. At the core of this approach is the existence of appropriate random Green's functions. For example, we showed that in the case of a 3-dimensional unbounded domain the existence of appropriate random Green's functions is sufficient for finding the exact nonlocal averaged equations for flow velocity using the operator with a unique kernel-vector. Examination of random fields with global symmetry (isotropy, transversal isotropy and orthotropy) makes it possible to describe significantly different types of averaged equations with nonlocal unique operators. It is evident that the existence of random Green's functions for physical linear processes is equivalent to assuming the existence of some linear random operators for appropriate stochastic equations. If we restricted ourselves to this assumption only, as we have done in this paper, we can study the processes in any dimensional bounded or unbounded fields and in addition, cases in which the random fields of conductivity and porosity are stochastically nonhomogeneous, nonglobally symmetrical, etc.. It is clear that examining more general cases involves significant difficulty and constricts the analysis of structural types for the processes being studied. Nevertheless, we show that we obtain the essential information regarding averaged equations for steady and transient flow, as well as for solute transport.

  18. Alternative granular media for the metal casting industry. Final report, September 30, 1994

    SciTech Connect (OSTI)

    Guichelaar, P.J.; Ramrattan, S.N.; Tieder, R.E.

    1995-09-01

    Silica sand for foundry use is inexpensive to purchase, readily transported and widely available. As a result, it is universally used. However, three factors are becoming increasingly significant as more environmental regulations are promulgated. First, the disposal of waste foundry sand has become an excessively burdensome cost. Second, the phase changes which occur in the silica structure on heating and cooling cause thermal breakdown of the sand into smaller unusable fractions. Third, silica is a relatively weak mineral. Alternatives to silica sand which can withstand the rigors of repetitive reuse must be seriously evaluated as a way to control production costs of the domestic metal casting industry. Chromite sands, olivine sands and carbon sands have each been successfully used to solve operating problems and thus have developed their specific niches in the foundry materials inventory. However, there are several other materials that are candidates for replacing silica sand, such as fused alumina, sintered bauxite and sintered oil well proppants. These media, and others that are generically similar, are manufactured for specific purposes. Compositions and shapes could be readily tailored for used in a metal casting environment of total recycling and materials conservation. This study examines materials that are readily available as alternatives to silica sand from a functionality perspective and a cost perspective. Some of the alternative materials are natural and others are synthetic and thus referring to them as ``sands`` has the potential to cause confusion; the generic term ``granular medium`` is used in this study to mean any material that could functionally substitute for silica sand in the foundry process.

  19. REE Sorption Study of Seived -50 +100 Mesh Fraction of Media #1 in Brine #1 at Different Concentrations of REE at 70C

    SciTech Connect (OSTI)

    Gary Garland

    2015-06-29

    This dataset shows the sorption capacities of smaller grain size (-50 +100 mesh) of media #1 in brine #1 at different starting concentrations of REE's at elevated temperature of 70C. The experimental conditions are 2g of -50 +100 mesh media #1 to 150mL of REE solution at concentartions of .2ppm each, 2ppm each, and 20ppm each. The pH of the solution is 5.5, and the temperature was at 70C.

  20. EXPERIMENTAL EVALUATION OF CHEMICAL SEQUESTRATION OF CARBON DIOXIDE IN DEEP AQUIFER MEDIA - PHASE II

    SciTech Connect (OSTI)

    Neeraj Gupta; Bruce Sass; Jennifer Ickes

    2000-11-28

    In 1998 Battelle was selected by the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL) under a Novel Concepts project grant to continue Phase II research on the feasibility of carbon dioxide (CO{sub 2}) sequestration in deep saline formations. The focus of this investigation is to conduct detailed laboratory experiments to examine factors that may affect chemical sequestration of CO{sub 2} in deep saline formations. Reactions between sandstone and other geologic media from potential host reservoirs, brine solutions, and CO{sub 2} are being investigated under high-pressure conditions. Some experiments also include sulfur dioxide (SO{sub 2}) gases to evaluate the potential for co-injection of CO{sub 2} and SO{sub 2} related gases in the deep formations. In addition, an assessment of engineering and economic aspects is being conducted. This current Technical Progress Report describes the status of the project as of September 2000. The major activities undertaken during the quarter included several experiments conducted to investigate the effects of pressure, temperature, time, and brine composition on rock samples from potential host reservoirs. Samples (both powder and slab) were taken from the Mt. Simon Sandstone, a potential CO{sub 2} host formation in the Ohio, the Eau Claire Shale, and Rome Dolomite samples that form the caprock for Mt. Simon Sandstone. Also, a sample with high calcium plagioclase content from Frio Formation in Texas was used. In addition, mineral samples for relatively pure Anorthite and glauconite were experimented on with and without the presence of additional clay minerals such as kaolinite and montmorillonite. The experiments were run for one to two months at pressures similar to deep reservoirs and temperatures set at 50 C or 150 C. Several enhancements were made to the experimental equipment to allow for mixing of reactants and to improve sample collection methods. The resulting fluids (gases and liquids) as well as the rock samples were characterized to evaluate the geochemical changes over the experimental period. Preliminary results from the analysis are presented in the report. More detailed interpretation of the results will be presented in the technical report at the end of Phase II.

  1. Aligned vertical fractures, HTI reservoir symmetry, and Thomsenseismic anisotropy parameters for polar media

    SciTech Connect (OSTI)

    Berryman, James G.

    2007-12-12

    Sayers and Kachanov (1991) defined crack-influence parameters that are shown to be directly related to Thomsen (1986) weak-anisotropy seismic parameters for fractured reservoirs when the crack/fracture density is small enough. These results are then applied to the problem of seismic wave propagation in polar (i.e., non-isotropic) reservoirs having HTI seismic wave symmetry due to the presence of aligned vertical fractures and resulting in azimuthal seismic wave symmetry at the earth's surface. The approach presented suggests one method of inverting for fracture density from wave-speed data. It is also observed that the angular location {theta}{sub ex} of the extreme value (peak or trough) of the quasi-SV-wave speed for VTI occurs at an angle determined approximately by the formula tan{sup 2} {theta}{sub ex} {approx_equal} tan {theta}{sub m} = [(c{sub 33} - c{sub 44})/(c{sub 11}-c{sub 44})]{sup 1/2}, where {theta}{sub m} is an angle determined directly (as shown) from the c{sub ij} elastic stiffnesses, whenever these are known from either quasi-static or seismic wave measurements. Alternatively, {theta}{sub ex} is given in terms of the Thomsen seismic anisotropy parameters by tan {theta}{sub ex} {approx_equal} ([v{sub p}{sup 2}(0)-v{sub s}{sup 2}(0)]/[(1 + 2{epsilon})v{sub p}{sup 2}(0)-v{sub s}{sup 2}(0)]){sup 1/4}, where {epsilon} = (c{sub 11}-c{sub 33})/2c{sub 33}, v{sub p}{sup 2}(0) = c{sub 33}/{rho}, and v{sub s}{sup 2}(0) = c{sub 44}/{rho}, with {rho} being the background inertial mass density. The axis of symmetry is always treated here as the x{sub 3}-axis for either VTI symmetry (due, for example, to horizontal cracks), or HTI symmetry (due to aligned vertical cracks). Then the meaning of the stiffnesses is derived from the fracture analysis in the same way for VTI and HTI media, but for HTI the wave speeds relative to the earth's surface are shifted by 90{sup o} in the plane perpendicular to the aligned vertical fractures. Skempton's (1954) coefficient is used as a general means of quantifying the effects of fluids inside the fractures. Explicit formulas for Thomsen's parameters are also obtained for either drained or undrained fractures resulting in either VTI or HTI symmetry of the reservoir.

  2. In situ measurement of the bonded film thickness of Z-Tetraol lubricant on magnetic recording media

    SciTech Connect (OSTI)

    Zhu Lei; Li Feng

    2010-10-15

    Currently, the bonded film thickness of perfluoropolyether lubricant on top of magnetic recording media is measured by a two-step process. First, the media disk has to be rinsed thoroughly using a fluorocarbon solvent (for instance, Vetrel) to remove the mobile lubricant. Second, the thickness of the remaining lubricant on the media surface which is regarded as the bonded lubricant thickness is then measured either by Fourier transform infrared spectroscopy (FTIR) or electron spectroscopy for chemical analysis. As the total lubricant thickness approaches single molecular dimension ({approx}10 A), current methods face tremendous challenge on the accuracy and sensitivity of the measurement. We studied the spectral characteristics responding to the lubricant bonding with the carbon overcoat by the time-of-flight secondary ion mass spectra and proposed to use the peak area ratio (C{sub 3}H{sub 2}F/C{sub 3}H{sub 5}O and C{sub 4}H{sub 10}O/C{sub 3}H{sub 6}O{sub 2}) to characterize the bonded Z-Tetraol lubricant that produces a direct bonded lubricant thickness measurement without the need to remove the mobile lubricant with a solvent. After taking the background signal of disks prior to bonding by UV irradiation into account, this method becomes independent of the total lubricant thickness as well as shows good correlation linearity (R{sup 2{approx}}87%) with the current FTIR method for the ratio of C{sub 4}H{sub 10}O/C{sub 3}H{sub 6}O{sub 2}.

  3. Methods, media and systems for managing a distributed application running in a plurality of digital processing devices

    DOE Patents [OSTI]

    Laadan, Oren; Nieh, Jason; Phung, Dan

    2012-10-02

    Methods, media and systems for managing a distributed application running in a plurality of digital processing devices are provided. In some embodiments, a method includes running one or more processes associated with the distributed application in virtualized operating system environments on a plurality of digital processing devices, suspending the one or more processes, and saving network state information relating to network connections among the one or more processes. The method further include storing process information relating to the one or more processes, recreating the network connections using the saved network state information, and restarting the one or more processes using the stored process information.

  4. Particle size analysis in a turbid media with a single-fiber, optical probe while using a visible spectrometer

    DOE Patents [OSTI]

    Canpolat, Murat; Mourant, Judith R.

    2003-12-09

    Apparatus and method for measuring scatterer size in a dense media with only a single fiber for both light delivery and collection are disclosed. White light is used as a source and oscillations of the detected light intensities are measured as a function of wavelength. The maximum and minimum of the oscillations can be used to determine scatterer size for monodisperse distributions of spheres when the refractive indices are known. In addition several properties of the probe relevant to tissue diagnosis are disclosed including the effects of absorption, a broad distribution of scatterers, and the depth probed.

  5. Synergistic extraction of trivalent lanthanides and actinides from acidic chloride media by tetra(n-octyl)diglycolamide

    SciTech Connect (OSTI)

    McAlister, D.R.; Horwitz, E. Philip

    2008-07-01

    Ferric chloride has been found to induce a significant synergistic enhancement of the extraction of trivalent lanthanides and actinides by tetra(n-octyl)diglycolamide (TODGA) from acidic chloride media. In this manuscript, results of a thorough investigation of the TODGA-HCl-Fe(III) system using solvent-extraction experiments designed to elucidate the stoichiometry of the synergistic species will be described. Results for Ac(III), Am(III), Eu(III), Pm(III), Y(III), Th(IV), Pu(IV), and U(VI) will be discussed. (authors)

  6. Experimental and numerical investigation of shock wave propagation through complex geometry, gas continuous, two-phase media

    SciTech Connect (OSTI)

    Liu, J. Chien-Chih [California Univ., Berkeley, CA (United States)

    1993-10-01

    The work presented here investigates the phenomenon of shock wave propagation in gas continuous, two-phase media. The motivation for this work stems from the need to understand blast venting consequences in the HYLIFE inertial confinement fusion (ICF) reactor. The HYLIFE concept utilizes lasers or heavy ion beams to rapidly heat and compress D-T targets injected into the center of a reactor chamber. A segmented blanket of failing molten lithium or Li{sub 2}BeF{sub 4} (Flibe) jets encircles the reactors central cavity, shielding the reactor structure from radiation damage, absorbing the fusion energy, and breeding more tritium fuel.

  7. TECHNICAL COMPARISON OF CANDIDATE ION EXCHANGE MEDIA FOR SMALL COLUMN ION EXCHANGE (SCIX) APPLICATIONS IN SUPPORT OF SUPPLEMENTAL LAW PRETREATMENT

    SciTech Connect (OSTI)

    RAMSEY AA; THORSON MR

    2010-12-28

    At-tank supplemental pretreatment including both filtration and small column ion exchange is currently under evaluation to facilitate salt waste retrieval and processing in the Hanford tank farms. Spherical resorcinol formaldehyde (sRF) resin is the baseline ion exchange resin for use in the Waste Treatment and Immobilization Plant (WTP). This document provides background and technical rationale to assist in determining whether spherical resorcinol formaldehyde (sRF) is also the appropriate ion exchange resin for supplemental LAW pretreatment processes and compares sRF with crystalline silicotitanate (CST) as potential supplemental pretreatment ion exchange media.

  8. Lewis Acid Pairs for the Activation of Biomass-derived Oxygenates in Aqueous Media

    SciTech Connect (OSTI)

    Roman, Yuriy

    2015-09-14

    The objective of this project is to understand the mechanistic aspects behind the cooperative activation of oxygenates by catalytic pairs in aqueous media. Specifically, we will investigate how the reactivity of a solid Lewis acid can be modulated by pairing the active site with other catalytic sites at the molecular level, with the ultimate goal of enhancing activation of targeted functional groups. Although unusual catalytic properties have been attributed to the cooperative effects promoted by such catalytic pairs, virtually no studies exist detailing the use heterogeneous water-tolerant Lewis pairs. A main goal of this work is to devise rational pathways for the synthesis of porous heterogeneous catalysts featuring isolated Lewis pairs that are active in the transformation of biomass-derived oxygenates in the presence of bulk water. Achieving this technical goal will require closely linking advanced synthesis techniques; detailed kinetic and mechanistic investigations; strict thermodynamic arguments; and comprehensive characterization studies of both materials and reaction intermediates. For the last performance period (2014-2015), two technical aims were pursued: 1) C-C coupling using Lewis acid and base pairs in Lewis acidic zeolites. Tin-, zirconium-, and hafnium containing zeolites (e.g., Sn-, Zr-, and Hf-Beta) are versatile solid Lewis acids that selectively activate carbonyl functional groups. In this aim, we demonstrate that these zeolites catalyze the cross-aldol condensation of aromatic aldehydes with acetone under mild reaction conditions with near quantitative yields. NMR studies with isotopically labeled molecules confirm that acid-base pairs in the Si-O-M framework ensemble promote soft enolization through α-proton abstraction. The Lewis acidic zeolites maintain activity in the presence of water and, unlike traditional base catalysts, in acidic solutions. 2) One-pot synthesis of MWW zeolite nanosheets for activation of bulky substrates. Through post-synthetic modifications, layered zeolite precursors can be transformed into 2-dimensional (2D), zeolites with open architectures. These novel hierarchical microporous/mesoporous materials with exposed active sites can facilitate the conversion of bulky substrates while maintaining higher stability than amorphous mesoporous materials. However, post-synthetic exfoliation techniques are energy intensive, multi-step and require highly alkaline conditions that result in low silica yields and a partially amorphous product. In this aim, we demonstrate an effective one-pot synthesis method to generate exfoliated single-unit-cell thick MWW nanosheets. The new material, named MIT-1, is synthesized using a rationally-designed OSDA and results in a material with high crystallinity, surface area, and acidity that does not require post-synthetic treatments other than calcination. A parametric study of Al, Na, and water content reveals that MIT-1 crystallizes over a wide synthetic window. Characterization data show that MIT-1 has high mesoporosity with an external surface area exceeding 500 m2g-1 and a high external acid site density of 21 x 10-5 mol g-1. Catalytic tests demonstrate that MIT-1 has three-fold higher catalytic activity for the Friedel-Crafts alkylation of benzene with benzyl alcohol as compared to that of other 3D MWW topology zeolites.

  9. Resolving the Impact of Biological Processes on DNAPL Transport in Unsaturated Porous Media through Nuclear Magnetic Resonance Relaxation Time Measurements

    SciTech Connect (OSTI)

    Hertzog, Russel; Geesey, Gill G.; White, Timothy A.; Ho, Clifford K.; Straley, Christian; Bryar, Traci R.; Seymour, Joseph; Codd, Sarah L.; Oram, Libbie

    2003-06-01

    This research leads to a better understanding of how physical and biological properties of porous media influence water and dense non-aqueous phase liquid (DNAPL) distribution under saturated and unsaturated conditions. Knowing how environmental properties affect DNAPL solvent flow in the subsurface is essential for developing models of flow and transport that are needed for designing remediation and long-term stewardship strategies. This project investigates the capability and limitations of low-field nuclear magnetic resonance (NMR) relaxation decay-rate measurements for determining environmental properties affecting DNAPL solvent flow in the subsurface. For in-situ subsurface environmental applications, lowfield proton NMR measurements are preferred to the conventional high-field techniques commonly used to obtain chemical shift data, because the low field measurements are much less degraded by the magnetic susceptibility variations between the rock grains and the pore fluid s that significantly interfere with the high-field NMR measurements. Our research scope includes determining whether DNAPLs exist in water-wet or solvent-wet environments, the pore-size distribution of the soils containing DNAPLs, and the impact of biological processes on their transport mechanisms in porous media. Knowledge of the in situ flow properties and pore distributions of organic contaminants are critical to understanding where and when these fluids will enter subsurface aquifers.

  10. Cellular interactions via conditioned media induce in vivo nephron generation from tubular epithelial cells or mesenchymal stem cells

    SciTech Connect (OSTI)

    Machiguchi, Toshihiko Nakamura, Tatsuo

    2013-06-07

    Highlights: We have attempted in vivo nephron generation using conditioned media. Vascular and tubular cells do cross-talks on cell proliferation and tubular changes. Tubular cells suppress these changes in mesenchymal stem cells. Tubular cells differentiate mesenchymal stem cells into tubular cells. Nephrons can be created from implanted tubular cells or mesenchymal stem cells. -- Abstract: There are some successful reports of kidney generation by utilizing the natural course of kidney development, namely, the use of an artificially treated metanephros, blastocyst or ureteric bud. Under a novel concept of cellular interactions via conditioned media (CMs), we have attempted in vivo nephron generation from tubular epithelial cells (TECs) or mesenchymal stem cells (MSCs). Here we used 10 CMs of vascular endothelial cells (VECs) and TECs, which is the first to introduce a CM into the field of organ regeneration. We first present stimulative cross-talks induced by these CMs between VECs and TECs on cell proliferation and morphological changes. In MSCs, TEC-CM suppressed these changes, however, induced cytokeratin expression, indicating the differentiation of MSCs into TECs. As a result, glomerular and tubular structures were created following the implantation of TECs or MSCs with both CMs. Our findings suggest that the cellular interactions via CMs might induce in vivo nephron generation from TECs or MSCs. As a promoting factor, CMs could also be applied to the regeneration of other organs and tissues.

  11. POLARIZED LINE FORMATION IN MULTI-DIMENSIONAL MEDIA. II. A FAST METHOD TO SOLVE PROBLEMS WITH PARTIAL FREQUENCY REDISTRIBUTION

    SciTech Connect (OSTI)

    Anusha, L. S.; Nagendra, K. N.; Paletou, F.

    2011-01-10

    In the previous paper of this series, we presented a formulation of the polarized radiative transfer equation for resonance scattering with partial frequency redistribution (PRD) in multi-dimensional media for a two-level atom model with unpolarized ground level, using the irreducible spherical tensors T{sub Q}{sup K}(i, {Omega}) for polarimetry. We also presented a polarized approximate lambda iteration method to solve this equation using the Jacobi iteration scheme. The formal solution used was based on a simple finite volume technique. In this paper, we develop a faster and more efficient method which uses the projection techniques applied to the radiative transfer equation (the Stabilized Preconditioned Bi-Conjugate Gradient method). We now use a more accurate formal solver, namely the well-known two-dimensional (2D) short characteristics method. Using the numerical method developed in Paper I, we can consider only simpler cases of finite 2D slabs due to computational limitations. Using the method developed in this paper, we could compute PRD solutions in 2D media in the more difficult context of semi-infinite 2D slabs also. We present several solutions which may serve as benchmarks in future studies in this area.

  12. Generalized multiscale finite-element method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media

    SciTech Connect (OSTI)

    Gao, Kai; Fu, Shubin; Gibson, Richard L.; Chung, Eric T.; Efendiev, Yalchin

    2015-04-14

    It is important to develop fast yet accurate numerical methods for seismic wave propagation to characterize complex geological structures and oil and gas reservoirs. However, the computational cost of conventional numerical modeling methods, such as finite-difference method and finite-element method, becomes prohibitively expensive when applied to very large models. We propose a Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media, where we construct basis functions from multiple local problems for both the boundaries and interior of a coarse node support or coarse element. The application of multiscale basis functions can capture the fine scale medium property variations, and allows us to greatly reduce the degrees of freedom that are required to implement the modeling compared with conventional finite-element method for wave equation, while restricting the error to low values. We formulate the continuous Galerkin and discontinuous Galerkin formulation of the multiscale method, both of which have pros and cons. Applications of the multiscale method to three heterogeneous models show that our multiscale method can effectively model the elastic wave propagation in anisotropic media with a significant reduction in the degrees of freedom in the modeling system.

  13. Generalized multiscale finite-element method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gao, Kai; Fu, Shubin; Gibson, Richard L.; Chung, Eric T.; Efendiev, Yalchin

    2015-04-14

    It is important to develop fast yet accurate numerical methods for seismic wave propagation to characterize complex geological structures and oil and gas reservoirs. However, the computational cost of conventional numerical modeling methods, such as finite-difference method and finite-element method, becomes prohibitively expensive when applied to very large models. We propose a Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media, where we construct basis functions from multiple local problems for both the boundaries and interior of a coarse node support or coarse element. The application of multiscale basis functions can capture the fine scale mediummore » property variations, and allows us to greatly reduce the degrees of freedom that are required to implement the modeling compared with conventional finite-element method for wave equation, while restricting the error to low values. We formulate the continuous Galerkin and discontinuous Galerkin formulation of the multiscale method, both of which have pros and cons. Applications of the multiscale method to three heterogeneous models show that our multiscale method can effectively model the elastic wave propagation in anisotropic media with a significant reduction in the degrees of freedom in the modeling system.« less

  14. Apparatus and method for qualitative and quantitative measurements of optical properties of turbid media using frequency-domain photon migration

    DOE Patents [OSTI]

    Tromberg, Bruce J.; Tsay, Tsong T.; Berns, Michael W.; Svaasand, Lara O.; Haskell, Richard C.

    1995-01-01

    Optical measurements of turbid media, that is media characterized by multiple light scattering, is provided through an apparatus and method for exposing a sample to a modulated laser beam. The light beam is modulated at a fundamental frequency and at a plurality of integer harmonics thereof. Modulated light is returned from the sample and preferentially detected at cross frequencies at frequencies slightly higher than the fundamental frequency and at integer harmonics of the same. The received radiance at the beat or cross frequencies is compared against a reference signal to provide a measure of the phase lag of the radiance and modulation ratio relative to a reference beam. The phase and modulation amplitude are then provided as a frequency spectrum by an array processor to which a computer applies a complete curve fit in the case of highly scattering samples or a linear curve fit below a predetermined frequency in the case of highly absorptive samples. The curve fit in any case is determined by the absorption and scattering coefficients together with a concentration of the active substance in the sample. Therefore, the curve fitting to the frequency spectrum can be used both for qualitative and quantitative analysis of substances in the sample even though the sample is highly turbid.

  15. Apparatus and method for qualitative and quantitative measurements of optical properties of turbid media using frequency-domain photon migration

    DOE Patents [OSTI]

    Tromberg, B.J.; Tsay, T.T.; Berns, M.W.; Svaasand, L.O.; Haskell, R.C.

    1995-06-13

    Optical measurements of turbid media, that is media characterized by multiple light scattering, is provided through an apparatus and method for exposing a sample to a modulated laser beam. The light beam is modulated at a fundamental frequency and at a plurality of integer harmonics thereof. Modulated light is returned from the sample and preferentially detected at cross frequencies at frequencies slightly higher than the fundamental frequency and at integer harmonics of the same. The received radiance at the beat or cross frequencies is compared against a reference signal to provide a measure of the phase lag of the radiance and modulation ratio relative to a reference beam. The phase and modulation amplitude are then provided as a frequency spectrum by an array processor to which a computer applies a complete curve fit in the case of highly scattering samples or a linear curve fit below a predetermined frequency in the case of highly absorptive samples. The curve fit in any case is determined by the absorption and scattering coefficients together with a concentration of the active substance in the sample. Therefore, the curve fitting to the frequency spectrum can be used both for qualitative and quantitative analysis of substances in the sample even though the sample is highly turbid. 14 figs.

  16. Existing systems review of treatment media for the Bear Creek Valley treatability study, Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    1998-01-01

    In situ treatment has been proposed as a remediation alternative for surface water and groundwater contaminated with uranium and nitrate as a result of former waste disposal practices in the S-3 Ponds. Interceptor trenches containing reactive media have been proposed to treat groundwater, and constructed wetlands and/or algal mats are potential alternatives for treating surface water. This report presents the results from testing of ten different reactive media, and combinations of media, that are candidates for use in the proposed interceptor trenches to remove uranium and nitrate from groundwater. It also presents the results of testing and evaluation of algal mats and wetlands for removing uranium and nitrate from surface water.

  17. Laser based analysis using a passively Q-switched laser employing analysis electronics and a means for detecting atomic optical emission of the laser media

    DOE Patents [OSTI]

    Woodruff, Steven D.; Mcintyre, Dustin L.

    2016-03-29

    A device for Laser based Analysis using a Passively Q-Switched Laser comprising an optical pumping source optically connected to a laser media. The laser media and a Q-switch are positioned between and optically connected to a high reflectivity mirror (HR) and an output coupler (OC) along an optical axis. The output coupler (OC) is optically connected to the output lens along the optical axis. A means for detecting atomic optical emission comprises a filter and a light detector. The optical filter is optically connected to the laser media and the optical detector. A control system is connected to the optical detector and the analysis electronics. The analysis electronics are optically connected to the output lens. The detection of the large scale laser output production triggers the control system to initiate the precise timing and data collection from the detector and analysis.

  18. Lattice Boltzmann simulation of solute transport in heterogeneous porous media with conduits to estimate macroscopic continuous time random walk model parameters

    SciTech Connect (OSTI)

    Anwar, S.; Cortis, A.; Sukop, M.

    2008-10-20

    Lattice Boltzmann models simulate solute transport in porous media traversed by conduits. Resulting solute breakthrough curves are fitted with Continuous Time Random Walk models. Porous media are simulated by damping flow inertia and, when the damping is large enough, a Darcy's Law solution instead of the Navier-Stokes solution normally provided by the lattice Boltzmann model is obtained. Anisotropic dispersion is incorporated using a direction-dependent relaxation time. Our particular interest is to simulate transport processes outside the applicability of the standard Advection-Dispersion Equation (ADE) including eddy mixing in conduits. The ADE fails to adequately fit any of these breakthrough curves.

  19. An Approach for Assessing the Signature Quality of Various Chemical Assays when Predicting the Culture Media Used to Grow Microorganisms

    SciTech Connect (OSTI)

    Holmes, Aimee E.; Sego, Landon H.; Webb-Robertson, Bobbie-Jo M.; Kreuzer, Helen W.; Anderson, Richard M.; Unwin, Stephen D.; Weimar, Mark R.; Tardiff, Mark F.; Corley, Courtney D.

    2013-02-01

    We demonstrate an approach for assessing the quality of a signature system designed to predict the culture medium used to grow a microorganism. The system was comprised of four chemical assays designed to identify various ingredients that could be used to produce the culture medium. The analytical measurements resulting from any combination of these four assays can be used in a Bayesian network to predict the probabilities that the microorganism was grown using one of eleven culture media. We evaluated combinations of the signature system by removing one or more of the assays from the Bayes network. We measured and compared the quality of the various Bayes nets in terms of fidelity, cost, risk, and utility, a method we refer to as Signature Quality Metrics

  20. Quantitative broadband absorption and scattering spectroscopy in turbid media by combined frequency-domain and steady state methodologies

    DOE Patents [OSTI]

    Tromberg, Bruce J.; Berger, Andrew J.; Cerussi, Albert E.; Bevilacqua, Frederic; Jakubowski, Dorota

    2008-09-23

    A technique for measuring broadband near-infrared absorption spectra of turbid media that uses a combination of frequency-domain and steady-state reflectance methods. Most of the wavelength coverage is provided by a white-light steady-state measurement, whereas the frequency-domain data are acquired at a few selected wavelengths. Coefficients of absorption and reduced scattering derived from the frequency-domain data are used to calibrate the intensity of the steady-state measurements and to determine the reduced scattering coefficient at all wavelengths in the spectral window of interest. The absorption coefficient spectrum is determined by comparing the steady-state reflectance values with the predictions of diffusion theory, wavelength by wavelength. Absorption spectra of a turbid phantom and of human breast tissue in vivo, derived with the combined frequency-domain and steady-state technique, agree well with expected reference values.