National Library of Energy BETA

Sample records for mattertm psm places

  1. Controlling OSHA PSM documentation

    SciTech Connect (OSTI)

    Person, J.S. [Warren-Forthought, Inc., Angleton, TX (United States)

    1997-06-01

    At present, most companies in the hazardous materials process industries are knowledgeable in the requirements of the OSHA Process Safety Management (PSM) standard (29 CFR 1910.119), issued in May of 1992. The current question facing many of these companies is no longer ``How does one comply?`` but rather, ``What does one do with all the documentation generated from the OSHA PSM Standard?``. Using an Electronic Performance Support System (EPSS) for delivering and controlling OSHA PSM documentation will be discussed. This paper will address the important components of an EPSS and successful case studies.

  2. PSM case history: Regulatory compliance can prevent catastrophic incidents

    SciTech Connect (OSTI)

    Kiihne, E.J.; Mannan, M. [RMT/Jones and Neuse, Inc., Austin, TX (United States)

    1995-12-31

    As mandated by the Clean Air Act Amendments of 1990, the Occupational Safety and Health Administration promulgated on February 24, 1992 the Process Safety Management (PSM) rule: 29 CFR 1910.119. The PSM rule represents a holistic program which requires facilities to develop, implement and practice 14 different elements. Each of the 14 elements are significant in the protection of health and safety of all employees and personnel working in and around the plant site. PSM programs developed in compliance with the PSM rule are expected to reduce the probability and consequence of occurrence of hazardous incidents. This paper presents a real life incident that occurred in a plant before a PSM program was put in place. A detailed description of the incident is provided with appropriate discussions of non compliance with the PSM rule. Finally, the paper provides a theoretical scenario where a fully operational PSM program would have prevented the incident. The case history and discussion provided in this paper also reinforces the concept of maintaining process and equipment integrity through multiple barriers of safety. A fully operational PSM program represents such a multiple barrier safety system.

  3. PSM implementation at a refinery

    SciTech Connect (OSTI)

    Nahale, T.

    1995-12-31

    Prior to the promulgation of the OSHA Standard on Process Safety Management (PSM), the petroleum industry had a precursor developed by the American Petroleum Institute titled Recommended Practice 750, Management of Process Hazards. This Recommended Practice, though not identical with the OSHA regulation, provided the industry with a voluntary standard prior to May, 1992, when PSM went into effect. In formulating a PSM implementation strategy, one of the first decisions encountered at a facility is whether to utilize a separate group dedicated full-time to PSM issues, or to develop the program using key individuals who continue to perform their regulator job duties. Although a PSM manager may prefer one strategy over the other, this staffing decisions is normally made by senior management at the facility.

  4. Psm Nature Power Service Management Formerly Umweltkontor Renewable...

    Open Energy Info (EERE)

    Psm Nature Power Service Management Formerly Umweltkontor Renewable Energy AG Jump to: navigation, search Name: psm Nature Power Service & Management (Formerly Umweltkontor...

  5. The Penetrant System Monitoring (PSM) panel: Its use and limitations

    SciTech Connect (OSTI)

    Robinson, S.J. [Sherwin Inc., South Gate, CA (United States)

    1996-12-31

    In the last several years, the Penetrant System Monitoring (PSM) panel has been increasingly used for purposes for which it was never intended. Intended originally for use by penetrant system operators, the PSM panel is increasingly being used by material control departments and by process engineering departments. This paper`s purpose is to describe and give guidance concerning the proper use and maintenance of PSM panels. It recounts the evolution of penetrant system test panels, and compares how the different types of panels are made. It discusses the limitations of the PSM panel as used by the material control department, the process engineering department, and the production line.

  6. Summary of 2011 Accomplishments HI & PSM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2011 Accomplishments HI & PSM Summary of 2011 Accomplishments HI & PSM In the Hydraulic Institute's 94-year history, 2011 was arguably a very significant year. In January the United States Department of Energy announced its ntent to explore a rulemaking on pump efficiency. This announcement set in motion our year-long effort to establish and communicate the pump industry's position while serving as a catalyst for accelerating other related initiatives of the Institute.

  7. Improve client-contractor working relationships under PSM

    SciTech Connect (OSTI)

    Early, W.F. II [Early Consulting, Houston, TX (United States)

    1996-10-01

    Many operating companies rely on engineering/procurement/construction (EPC) contractors to provide needed services during expansions and other capital project ventures. These service providers are obligated to work under the same process safety management (PSM) guidelines as the operating company. So what are the responsibilities for the operating company (client), contractor and others under PSM? Following the checklist, EPC contractors and operating companies can develop and assign process safety responsibilities early in project planning. Under these conditions, all involved project parties are fully aware of their individual obligations as mandated by 29 CFR 1910.119 Process Safety Management of Highly Hazardous Chemicals (OSHA PSM). Fully disclosing individual party responsibilities ensures dialogue between the client and the EPC contractor and other involved service providers. Clearly defining and communicating project responsibilities may influence project execution and associated costs considerably. The paper describes the project planning under PSM, PSM elements, process safety information, process hazard analysis, operating procedures, training, contractor programs, pre-startup safety review, mechanical integrity, incident investigations, emergency planning and response, and compliance audits.

  8. PSM`s most common struggle: Implementing mechanical integrity

    SciTech Connect (OSTI)

    Remson, A.C.; Farmer, J.H.; King, S.C. [JBF Associates, Inc., Knoxville, TN (United States)] [JBF Associates, Inc., Knoxville, TN (United States)

    1995-10-01

    Most companies have found that of the 14 OSHA PSM elements, Mechanical Integrity (MI) presents the greatest implementation challenge. Although maintenance departments have successfully installed, repaired, and replaced plant equipment for decades, many of these same maintenance departments have struggled with OSHA`s PSM requirements. One major challenge is prioritizing resources. Opportunities to improve will always exist; however, it is often difficult to effectively allocate money and manpower. Another challenge is simply getting organized. The MI program should be supported by appropriate, useful procedures; but given the multifaceted and ever-changing nature of maintenance, what procedures should be written? How detailed should be procedures be? With nearly 3 years of PSM enforcement complete, an analysis of OSHA`s MI citation helps to provide insight to these challenges. This paper presents ideas for implementing MI in a manner that meets OSHA`s expectations while contributing to safe, effective maintenance in PSM-covered processes. In particular, the paper presents ideas for developing MI programs that effectively prioritize company resources, with appropriate inspection/test/preventive maintenance and quality assurance (QA) activities. This paper also presents ideas for developing a list of mechanical integrity procedures to address OSHA`s requirements as well as the type of information to include in those procedures. 10 refs., 3 tabs.

  9. Facility configuration management: An approach to PSM/RMP compliance

    SciTech Connect (OSTI)

    Melson, K.R. [Hurst Consulting, Inc., Angleton, TX (United States); Tagoe, C.C. [Occidental Chemical Corp., Pasadena, TX (United States); Souza, P.A. de [Tandem Technologies Group, Inc., Houston, TX (United States)

    1996-08-01

    New industry standards addressing Process Safety Management (PSM) and Risk Management Programs (RMP) specifically focus on the Management of Change (MOC) in chemical plants. The nuclear power industry has addressed this issue very strongly, since their regulations are even more stringent in MOC than the PSM and RMP standards. Although the nuclear industry is viewed by some as overly regulated, the purpose of this paper is to investigate the methods used in the nuclear industry to address the same types of requirements, and explore any advantages and lessons learned from the nuclear industry. Configuration Management programs are widely used in the nuclear industry to address MOC. When implemented properly, they have been found to be very effective in implementing site wide requirements, solving coordination problems, and increasing plant safety.

  10. Pump Systems Matter Mission and Vision | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pump Systems Matter Mission and Vision Pump Systems Matter Mission and Vision Pump Systems Matter(tm) (PSM) places a primary focus on pump systems education and outreach and addresses energy savings and total cost of pump ownership. C_Vision_&_Mission_of_Pump_Systems_Matter.pdf (56.49 KB) More Documents & Publications Overview of Pump Systems Matter Hydraulic Institute Member Benefits Course Overview Pump Systems Matter Optimization

  11. Pump Systems Matter Mission and Vision:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pump Systems Matter Mission and Vision: Pump Systems Matter(tm) (PSM) places a primary focus on pump systems education and outreach and addresses energy savings and total cost of pump ownership. Vision: Pump Systems Matter initiative assists North American pump users gain a more competitive business advantage through strategic, broad-based energy management and pump system performance optimization. Mission: To provide the marketplace with tools and collaborative opportunities to integrate pump

  12. Preparing for CAAA risk management plans: The lessons of OSHA PSM process safety management

    SciTech Connect (OSTI)

    Gillespie, D.P. [Control Systems Consultants, Inc., Ashland, KY (United States)

    1994-12-31

    29 CFR 1910.119 OSHA Process Safety Management (PSM) became law in 1992, presenting covered facilities with extraordinarily comprehensive and demanding requirements for information management. This paper reports an approach adopted by petrochemical plants that have pioneered automated, integrated compliance with PSM information requirements. The approach is worthy of consideration by the many additional plants that will be covered by 40 CFR Part 67 Risk Management Programs for Chemical Accidental Release Prevention (RNT), which closely parallels PSM`s information requirements.

  13. Exemptions from OSHA`s PSM rule oil and gas field production

    SciTech Connect (OSTI)

    West, H.H. [Shawnee Engineers, Houston, TX (United States); Landes, S. [SH Landes, Houston, TX (United States)

    1995-12-31

    The OSHA Process Safety Management (PSM) regulation, OSHA 1910.119, contains a number of exemptions which are specifically directed to the low hazard situations typically found in the field production facilities of the oil and gas industry. Each relevant PSM exemption is discussed with particular regard to the requirements of hydrocarbon production facilities.

  14. Ensuring regulatory compliance: Use of computerized database for tracking PSM activities and documentation

    SciTech Connect (OSTI)

    Lee, W.S.; Rahman, M.; Mannan, S. [RMT/Jones and Neuse, Inc., Austin, TX (United States)

    1995-12-31

    As mandated by the Clean Air Act Amendments of 1990, the Occupational Safety and Health Administration (OSHA) promulgated on February 24, 1992 the Process Safety Management (PSM) rule: 29 CFR 1910.119. The PSM rule requires covered facilities to develop, implement and practice a 14-element program. The implementation and practice of many of these elements result in hazard management and risk reduction recommendations. The PSM rule both explicitly and implicitly require the development and implementation of a system to track the successful resolution of these recommendations. This paper presents the case history for a plant which implemented a computerized database system to track the resolution of recommendations resulting from the implementation of different elements of the PSM rule. The approach presented here provides a powerful method for record keeping and documentation which can ultimately be used to prove compliance with the PSM rule. The objectives of a computerized tracking system are to compile the recommendations from various PSM activities, to update and maintain any related information, and to produce specific reports for documentation as needed. PSM-TRACK{trademark} has been developed as a tracking database to ensure that the recommendations and actions resulting from various PSM activities are addressed, assigned and followed to closure.

  15. A review of OSHA PSM citations relating to mechanical integrity of process piping

    SciTech Connect (OSTI)

    Casada, M.L.; Remson, A.C.; Yerger, C.M. [JBF Associates, Inc., Knoxville, TN (United States)

    1996-07-01

    OSHA`s process safety management (PSM) regulation has been in effect for more than three years. The regulation poses challenges for facilities in documenting the integrity of process piping systems. This paper summarizes the results of a project sponsored by the Materials Technology Institute (MTI) to compile PSM enforcement information relating to mechanical integrity W and process safety information (PSI) relating to equipment. This paper provides an analysis of how OSHA is citing violations of the PSM regulation as it relates to process piping. This information should be helpful to engineers and maintenance personnel who need guidance on how to ``OSHA-proof`` their mechanical integrity compliance for process piping systems.

  16. Localization and physical mapping of the prostate-specific membrane antigen (PSM) gene to human chromosome 11

    SciTech Connect (OSTI)

    Rinker-Schaeffer, C.W.; Hawkins, A.L.; Griffin, C.A.; Isaacs, J.T. [Johns Hopkins Medical School, Baltimore, MD (United States)] [and others

    1995-11-01

    The prostate-specific membrane antigen (PSM) was identified by the monoclonal antibody 7E11-C5.3, which was raised against the human prostatic carcinoma cell line LNCaP. The PSM antigen is expressed by normal, neoplastic, and metastatic prostatic tissues. The 2.65-kb cDNA encoding the 100-kDa PSM glycoprotein was cloned from LNCaP cells. Studies have shown that the expression of PSM is tissue-specific. In the present study monochromosomal somatic cell hybrids were used to localize the PSM gene to human chromosome 11. Using this information, initial mapping studies identified two potential PSM gene loci at 11p11.1-p13 and 11q14. Further high-stringency analysis using cosmid probes identified the 11q14 region as the location of the PSM gene. 10 refs., 2 figs.

  17. Rapid/PSM - lessons learned from using PSA for plant status monitoring

    SciTech Connect (OSTI)

    Chu, B.B.; Young, J.; Weinzimmer, F.

    1987-01-01

    Power plant operation requires decisions that can affect both the availability of the plant and its compliance with operating guidelines. Taking equipment out of service may affect the ability of the plant to produce power at a certain power level and may also affect the status of the plant with regard to technical specifications. However, plant operators and supervisors possess few tools that can rapidly determine plant availability and system status, can assess the impact on plant health (e.g., likelihood of continued operation) of taking equipment in or out of service, and can present information on required actions or desired alternatives. The plant status monitor (PSM), which is a part of Rapid software development under the risk assessment program of the Nuclear Power Division at the Electric Power Research Institute (EPRI), is designed to provide such information to plant personnel as an aid to their decision making. The Rapid/PSM can assist the management of plant safety and productivity and can minimize the potential technical specification violations. This paper describes the lessons learned from the development and demonstration of Rapid/PSM software at GPU Nuclear Corporation's (GPUN's) Oyster Creek Nuclear Generation Plant.

  18. Manhattan Project: Places

    Office of Scientific and Technical Information (OSTI)

    Other Places Columbia University University of California, Berkeley The Dayton Project, 1943-1945 The Dayton Project, 1945 and Beyond Bomb Casing and Drop Test Sites Trinity Test ...

  19. Manhattan Project: Places Images

    Office of Scientific and Technical Information (OSTI)

    PLACES IMAGES Resources > Photo Gallery Scroll down to see each of these images individually. The images are: 1. Remains of a Shinto Shrine, Nagasaki, October 1945 (courtesy the ...

  20. Facilities and Places

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facilities and Places Manhattan Project in Los Alamos: Facilites and Places The Manhattan Project National Historical Park tells the story of the people, the events, and the science and engineering that led to the creation of the atomic bombs that helped bring an end to World War II. The park allows visitors to explore how the creation of these weapons changed the world. Ice House Memorial 2. Ice House Memorial This memorial contains original stone from the Ranch School's ice house, which was

  1. Better Place Formerly Project Better Place | Open Energy Information

    Open Energy Info (EERE)

    California Zip: 94304 Product: Project Better Place will establish a widespread grid of electric charging spots to provide consumers with the energy to keep their cars charged...

  2. Hawaii Play Fairway Analysis: Hawaiian Place Names

    SciTech Connect (OSTI)

    Nicole Lautze

    2015-11-15

    Compilation of Hawaiian place names indicative of heat. Place names are from the following references: Pukui, M.K., and S.H. Elbert, 1976, Place Names of Hawaii, University of Hawaii Press, Honolulu, HI 96822, 289 pp. ; Bier, J. A., 2009, Map of Hawaii, The Big Island, Eighth Edition, University of Hawaii Press, Honolulu, HI  96822, 1 sheet.; and Reeve, R., 1993, Kahoolawe Place Names, Consultant Report No. 16, Kahoolawe Island Conveyance Commission, 259 pp.

  3. Project Better Place | Open Energy Information

    Open Energy Info (EERE)

    1070 Arastradero Road Place: Palo Alto, California Zip: 94304 Region: Bay Area Sector: Vehicles Product: Electric vehicle infrastructure company building a battery swap out...

  4. In-place HEPA filter penetration test

    SciTech Connect (OSTI)

    Bergman, W.; Wilson, K.; Elliott, J.

    1997-08-01

    We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in-place penetration test is practical. 14 refs., 14 figs., 3 tabs.

  5. In-place HEPA filter penetration test

    SciTech Connect (OSTI)

    Bergman, W.; Wilson, kK.; Elliott, J.; Bettencourt, B.; Slawski, J.W.

    1997-01-01

    We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in- place penetration test is practical.

  6. ORP Cycling Team Places Third in Challenge

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash. – Four EM Office of River Protection employees peddled for the annual Federal Bike Challenge, logging an impressive 1,375 miles and taking third place out of 200 teams.

  7. Cure-in-place process for seals

    DOE Patents [OSTI]

    Hirasuna, Alan R.

    1981-01-01

    A cure-in-place process which allows a rubber seal element to be deformed to its service configuration before it is cross-linked and, hence, is a plastic and does not build up internal stress as a result of the deformation. This provides maximum residual strength to resist the differential pressure. Furthermore, the process allows use of high modulus formulations of the rubber seal element which would otherwise crack if cured and then deformed to its service configuration, resulting in a seal which has better gap bridging capability. Basically, the process involves positioning an uncured seal element in place, deforming it to its service configuration, heating the seal element, curing it in place, and then fully seating the seal.

  8. Forwardly-placed firearm fire control assembly

    DOE Patents [OSTI]

    Frickey, Steven J.

    2001-12-22

    A firearm fire control assembly for disposition in a forwardly placed support-hand operative relationship within a firearm having a combination of a firing pin and a firearm hammer adapted to engage and fire a cartridge, a sear assembly to alternately engage and disengage the combination of the firearm hammer and firing pin, and a trigger assembly including a movable trigger mechanism that is operable to engage the sear assembly to cause the firearm hammer firing pin combination to fire the firearm, a fire control assembly including a fire control depression member and a fire control rod operably connected to the depression member, and being positioned in a forward disposition disposed within a forestock of the firearm, and the depression member adapted to be operably engaged and depressed by the user's conventional forwardly placed support hand to maneuver the fire control rod to provide firing control of the firing of the firearm.

  9. In-place testing summary - 1990

    SciTech Connect (OSTI)

    Ortiz, J.P.

    1990-05-01

    This is one of several reports concerning an on-going in-place testing program of high efficiency filtration and chemical adsorber systems and portable filtered exhausters at the Los Alamos National Laboratory. This testing is in support of the Laboratory`s airborne waste management programs and asbestos abatement programs. Periodic in-place testing, along with health physics air sampling will determine whether the air cleaning systems are maintaining acceptable air-cleaning levels. These periodic evaluations help ensure that the plant and surrounding environment are free of any significant radioactive particulates, based on current EPA environmental levels and chemical airborne hazards from processing effluents. This report will provide an overview of system performance, testing methods and procedures.

  10. In-place filter testing summary

    SciTech Connect (OSTI)

    Ortiz, J.P.; Garcia, E.D.; Ortega, J.M.

    1988-03-01

    The most common method of identifying particle penetration through a filter or adsorber system is through the performance of a periodic penetration test, i.e., in-place test or leak test using an aerosol or gas vapor to challenge the filter or adsorber system. The aerosol is usually formed by vaporization of a liquid, di-2(ethelhexyl sebacate) (DEHS), and allowed to condense to form liquid particles of a certain size and distribution. The gas vapor is formed by vaporization of Freon 11 liquid. The periodic penetration test, although conducted annually, can and has been demonstrated to show the beginning degradation of a filter or adsorber system. Other evidence of penetration can include detection of radiation downstream of the filter system or the existence of an unusually low pressure drop across the filter, i.e., torn filter, etc. However, these kinds of occurrences show up instantaneously and could release radioactive material to the atmosphere before the systems could be shut down. When a filter system fails the in--place test or is showing evidence of.filter or component degradation, corrective measures are put into place in order to return,the system back to its best operating condition. This report presents a summary of all filter tests.

  11. CBEI: Broker Training - Placing Value on Energy Retrofits - 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review Presenter: Susan Wachter, ...

  12. Filter:Incentives by Place | Open Energy Information

    Open Energy Info (EERE)

    This filter covers the property Place. Retrieved from "http:en.openei.orgwindex.php?titleFilter:IncentivesbyPlace&oldid267397" Feedback Contact needs updating Image...

  13. Placing Fusion Power on a Pedestal | Princeton Plasma Physics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Placing Fusion Power on a Pedestal American Fusion News Category: Massachusetts Institute of Technology (MIT) Link: Placing Fusion Power on a Pedestal

  14. NPS - National Register of Historic Places website | Open Energy...

    Open Energy Info (EERE)

    NPS - National Register of Historic Places website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: NPS - National Register of Historic Places website...

  15. Miller Place, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Miller Place is a census-designated place in Suffolk County, New York.1 References US...

  16. Property:Incentive/Cont2Place | Open Energy Information

    Open Energy Info (EERE)

    search Property Name IncentiveCont2Place Property Type String Pages using the property "IncentiveCont2Place" Showing 25 pages using this property. (previous 25) (next...

  17. Standardized methods for in-place filter testing

    SciTech Connect (OSTI)

    Dykes, M.; Fretthold, J.K.; Slawski, J.

    1997-08-01

    The conference minutes of a US DOE meeting held on in-place filter testing are presented. The purpose of the conference was to transfer technical in-place testing knowledge throughout the DOE complex. Major items discussed included purchase requisitions, in-place testing, instrumentation, and in-place test personnel qualifications and training. Future actions identified by conference attendees centered on establishing complex-wide DOE policies on training, inspection and testing, and filter specifications.

  18. CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Review | Department of Energy Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review Presenter: Susan Wachter, University of Pennsylvania View the Presentation CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review (771.97 KB) More Documents & Publications Market Engagement Overview - 2015 BTO Peer Review Commercial Buildings Integration Program Overview - 2015 BTO Peer

  19. Tanglewilde-Thompson Place, Washington: Energy Resources | Open...

    Open Energy Info (EERE)

    Tanglewilde-Thompson Place, Washington: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 47.0531597, -122.7822066 Show Map Loading map......

  20. Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use Calibri, 12 point font for this memorandum.) (Effective...

  1. Recommendation 214: Placing more emphasis and priority on evaluating technologies

    Broader source: Energy.gov [DOE]

    The ORSSAB recommends that DOE place more emphasis and priority on evaluating technologies that could make recycling excess materials cost effective.

  2. Daniel Wright Junior High School Wins First Place In Hydrogen...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Daniel Wright Junior High School Wins First Place In Hydrogen Fuel Cell Car Contest National "Battle of the Brains" continues June 23-24 at the University of Denver June 23, 2006 ...

  3. The Place Where Emergency Care Belongs | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Place Where Emergency Care Belongs Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share ...

  4. North Brawley Power Plant Placed in Service; Currently Generating...

    Open Energy Info (EERE)

    Placed in Service; Currently Generating 17 MW; Additional Operations Update Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: North Brawley Power Plant...

  5. West University Place, Texas: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. West University Place is a city in Harris County, Texas. It falls under Texas's 7th congressional district.12 References ...

  6. Southside Place, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    article is a stub. You can help OpenEI by expanding it. Southside Place is a city in Harris County, Texas. It falls under Texas's 7th congressional district.12 References ...

  7. NASCAR Green Gets First Place in Daytona 500 | Department of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A story about how fuel cell generators were used at the Daytona 500 is currently posted on the Energy Department's blog. Read NASCAR Green Gets First Place in Daytona 500 to learn ...

  8. Smith Middle School Takes First Place at Science Bowl Hydrogen...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Smith Middle School Takes First Place at Science Bowl Hydrogen Fuel Cell Car Competition ... June 24, 2005 Golden, Colo. - Smith Middle School from Chapel Hill, N.C., captured top ...

  9. Boise State University Places First in DOE's Collegiate Wind Competition

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2015 | Department of Energy Boise State University Places First in DOE's Collegiate Wind Competition 2015 Boise State University Places First in DOE's Collegiate Wind Competition 2015 September 15, 2015 - 3:28pm Addthis Collegiate Wind Competition 2015 participants and judges at the National Wind Technology Center at the National Renewable Energy Laboratory. <em>Photo by Lee Jay Fingersh</em> Collegiate Wind Competition 2015 participants and judges at the National Wind Technology

  10. Putting ''place'' a multiscale context: perspectices from the sustainability sciences

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wilbanks, Thomas J.

    2015-05-04

    This paper summarizes a number of perspectives that have emerged from the sustainability sciences in recent decades (NRC, 1999; Kates et al., 2001; NRC, 2006; Kates, 2010) that shed light on the role of place in multi-scale sustainability science and vice-versa, ranging from the importance of the co-production of knowledge for sustainable development to threats to a ''sense of place'' from global environmental and economic changes.

  11. Air Leaks in Unexpected Places | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Air Leaks in Unexpected Places Air Leaks in Unexpected Places February 3, 2015 - 9:58am Addthis Sealing air leaks will help to decrease heating and cooling costs and make your home more comfortable. | Photo courtesy of Dennis Schroeder, National Renewable Energy Laboratory Sealing air leaks will help to decrease heating and cooling costs and make your home more comfortable. | Photo courtesy of Dennis Schroeder, National Renewable Energy Laboratory Elizabeth Spencer Communicator, National

  12. Sandia's Continuously Recirculating Falling-Particle Receiver Placed Atop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Solar Tower Continuously Recirculating Falling-Particle Receiver Placed Atop the Solar Tower - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization

  13. 36 CFR Part 60 – National Register of Historic Places

    Broader source: Energy.gov [DOE]

    Title 36 of the Code of Federal Regulations (36 CFR) Part 60 sets forth the procedural requirements for listing properties on the National Register of Historic Places. The National Historic Preservation Act of 1966 (16 U.S.C. 470 et seq., as amended) authorizes the Secretary of the Interior to expand and maintain a National Register of districts, sites, buildings, structures, and objects significant in American history, architecture, archaeology, engineering, and culture.

  14. 36 CFR Part 60: National Register of Historic Places (1981)

    Broader source: Energy.gov [DOE]

    Title 36 of the Code of Federal Regulations (36 CFR) Part 60 sets forth the procedural requirements for listing properties on the National Register of Historic Places. The National Historic Preservation Act of 1966 (16 U.S.C. 470 et seq., as amended) authorizes the Secretary of the Interior to expand and maintain a National Register of districts, sites, buildings, structures, and objects significant in American history, architecture, archaeology, engineering, and culture.

  15. Making the "Best Place to Live" Even Better

    Broader source: Energy.gov [DOE]

    For 2010, the appropriately named Eden Prairie, Minnesota was honored as the No. 1 Best Place to Live in the United States by Money Magazine. The highly-coveted civic title reflects many aspects of the family-friendly suburb of 62,000 located 16 miles from downtown Minneapolis, including the advantages of being the home to major employers like Fortune 500 trucking company C.H. Robinson and hearing-aid maker Starkey Labs. The city also hass many natural amenities like 17 lakes and parks with 125 miles of running, hiking, and biking trails.

  16. Case study of McCormick place cogeneration project

    SciTech Connect (OSTI)

    Overstreet, E.L.

    1994-12-31

    In the authors business of providing district energy services, competition is the key to his being able to have a positive impact on the environment, business stability, and economic activity. In the district energy industry, the competitive options are for property owners to continue to self generate energy to meet their needs, purchase energy from a company that utilizes electricity during off-peak hours to produce chilled water or take advantage of a total solution of purchasing tri-generation energy from Trigen-Peoples District Energy Company. Tri-generation is an innovative technology which involves the simultaneous production of steam, chilled water, and electricity. The McCormick Place cogeneration project calls for producing steam and chilled water (co-) for use by the Metropolitan Pier and Exposition Authority (MPEA). The plant will produce electricity (tri-) to run the production equipment.

  17. ASU is a place to be for energy research | Center for Bio-Inspired...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ASU is a place to be for energy research 1 Nov 2013 Dayn Sommer is a graduate student in ... proton-reduction catalysts....ASU is a place to be for photosynthesis and energy research. ...

  18. Sheltering in Place | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sheltering in Place Emergency Information Emergency Information Home Public Notifications Emergency Vocabulary Sheltering in Place Evacuation ISC Home Sheltering in Place Print Text Size: A A A FeedbackShare Page If you are advised to shelter-in-place by local news or our website, please follow these instructions: Bring everyone inside (including pets). Close all doors and windows. Turn off and close all ventilation systems, including: Air conditioning Attic & exhaust fans Furnaces Fireplace

  19. 2010 DOE National Science Bowl® Photos - First Place Winners...

    Office of Science (SC) Website

    First Place Winners National Science Bowl (NSB) NSB Home About National Science Bowl Contacts Regional Science Bowl Coordinators National Science Bowl FAQ's Alumni Past National ...

  20. EECBG Success Story: Making the "Best Place to Live" Even Better

    Broader source: Energy.gov [DOE]

    One advantage that Eden Prairie, Minnesota, will have going into next year’s Best Place to Live competition will be the energy efficiency upgrades taking place across the city thanks to $626,000 in Energy Efficiency and Conservation Block Grant (EECBG) funding provided through the American Recovery and Reinvestment Act. Learn more.

  1. --No Title--

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    2004 Product Supplied Data (Thousand Barrels per Day) Gasoline Distillate Fuel Jet Fuel Residual Fuel Other Products Total Products PSM PSA PSM PSA PSM PSA PSM PSA PSM PSA PSM PSA...

  2. Hunt for high-energy photons takes place from a mountaintop in Mexico

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hunt for high-energy photons takes place from a mountaintop in Mexico Hunt for high-energy photons takes place from a mountaintop in Mexico A new telescope built from water tanks might help answer some of the biggest questions in astronomy. June 12, 2016 Mars Telescope array, Mexico Hunt for high-energy photons takes place from a mountaintop in Mexico The air over your head is alive with invisible showers. Powerful particles from space are constantly hitting the atmosphere above you, generating

  3. Denver Post Names NREL as a Top Work Place - News Releases |...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    as a Top Work Place April 17, 2013 The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) has been recognized by the Denver Post as a "2013 Top Work...

  4. Do you believe that atoms stay in place when you observe them...

    Office of Scientific and Technical Information (OSTI)

    Do you believe that atoms stay in place when you observe them in HREM? This content will become publicly available on December 14, 2016 Title: Do you believe that atoms stay in ...

  5. I.C. 42-222 - Appeals -- Change in Point of Diversion, Place...

    Open Energy Info (EERE)

    2 - Appeals -- Change in Point of Diversion, Place of Use, Period of Use, or Nature of Use Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

  6. H.A.R. 13-198 - Hawai`i and National Register of Historic Places...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: H.A.R. 13-198 - Hawaii and National Register of Historic Places ProgramsLegal Abstract The...

  7. H.A.R. 13-197 - Hawai`i Historic Places Review Board | Open Energy...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: H.A.R. 13-197 - Hawaii Historic Places Review BoardLegal Abstract The regulations under this...

  8. N Reactor Placed In Interim Safe Storage: Largest Hanford Reactor Cocooning Project Now Complete

    Broader source: Energy.gov [DOE]

    RICHLAND, WASH. – The U.S. Department of Energy’s (DOE’s) River Corridor contractor, Washington Closure Hanford, has completed placing N Reactor in interim safe storage, a process also known as “cocooning.”

  9. Oil and Gas Company Oil and Gas Company Address Place Zip Website

    Open Energy Info (EERE)

    Oil and Gas Company Address Place Zip Website Abu Dhabi National Oil Company Abu Dhabi National Oil Company Abu http www adnoc ae default aspx Al Furat Petroleum Company Al Furat...

  10. Title 36 CFR 60 National Register of Historic Places | Open Energy...

    Open Energy Info (EERE)

    of Historic Places. Published NA Year Signed or Took Effect 1966 Legal Citation 36 C.F.R. 60 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet...

  11. Technical Basis for Work Place Air Monitoring for the Plutonium Finishing Plan (PFP)

    SciTech Connect (OSTI)

    JONES, R.A.

    1999-10-06

    This document establishes the basis for the Plutonium Finishing Plant's (PFP) work place air monitoring program in accordance with the following requirements: Title 10, Code of Federal Regulations (CFR), Part 835 ''Occupational Radiation Protection''; Hanford Site Radiological Control Manual (HSRCM-1); HNF-PRO-33 1, Work Place Air Monitoring; WHC-SD-CP-SAR-021, Plutonium Finishing Plant Final Safety Analysis Report; and Applicable recognized national standards invoked by DOE Orders and Policies.

  12. Placing UESC Task Orders Under the GSA Areawide Contract | Department of

    Office of Environmental Management (EM)

    Energy Placing UESC Task Orders Under the GSA Areawide Contract Placing UESC Task Orders Under the GSA Areawide Contract March 17, 2016 11:00AM to 1:00PM EDT Webinar provides attendees with an overview of the contracting options and services available from their local utility companies to engineer, finance, and install cost effective energy- and water-savings projects. Participants will be walked through the typical project process, from the audit phase to commissioning the equipment.

  13. Summary of the ergonomic assessments of selected EG G Idaho work places

    SciTech Connect (OSTI)

    Ostrom, L.T.; Gilbert, B.G.; Wilhelmsen, C.A.

    1991-07-01

    The purpose of this document is to describe the methodology, summarize the findings, and present the recommendations from ergonomic assessments at selected EG G Idaho work places. Members from EG G Idaho's Human Factors Research Unit formed an ergonomics team and performed this work from January to July 1991 as part of the Industrial Hygiene Initiative. The ergonomics team developed an assessment checklist as the first step in the process. They then used the checklist to conduct ergonomic assessments of selected work places. The findings from the ergonomic assessments showed that there were situations in every work place visited that have the potential of causing ergonomic problems. In most cases, however, they were not serious in nature. Recommendations include (a) having an industrial hygienist review new work place and task designs to ensure they incorporate ergonomic principles, (b) having an industrial hygienist help investigate musculoskeletal injuries, (c) ensuring all employees receive training on the caused of back injuries and cumulative trauma disorders, and (d) ensuring that a source of ergonomically designed furniture and equipment is available. A summary of specific findings and recommendations from work place assessments is also included. 13 refs., 1 tab.

  14. Science on the Hill: Portable MRI might make the world a better place

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portable MRI might make the world a better placer Portable MRI might make the world a better place Los Alamos' Battlefield MRI uses ultra-low-field magnetic resonance imaging to create images of the brain that can be used in field hospitals or in remote villages. August 9, 2015 portable mri Portable MRI systems created by Lab researchers can be used in battlefield hospitals. Science on the Hill: Portable MRI might make the world a better place Science moves forw--ard in surprising ways.

  15. Third Annual Science Alliance Takes Place in Ohio | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Annual Science Alliance Takes Place in Ohio Third Annual Science Alliance Takes Place in Ohio October 9, 2012 - 12:14pm Addthis Science Alliance 1 of 5 Science Alliance Students arrive at the welcome tent during the beginning of the two-day Science Alliance, in which more than 900 area high school juniors enjoyed presentations in 14 separate areas on a midway in the X-2207A parking lot. Image: Energy Department's Office of Environmental Management Date taken: 2012-09-25 08:59 Science Alliance 2

  16. Argonne named a 'Best Place' to work for postdocs in 2010 | Argonne

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Laboratory Argonne named a 'Best Place' to work for postdocs in 2010 February 25, 2010 Tweet EmailPrint The Department of Energy's (DOE) Argonne National Laboratory is one of the best places in the country for postdocs to work, according to a survey released today by the life sciences magazine, The Scientist. Argonne ranked 11th in the survey, honored by the magazine for its effort to help postdocs navigate their careers. The laboratory also received high marks for its open door

  17. Y-12, Making the World a Safer Place | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    , Making the World a ... Y-12, Making the World a Safer Place The mp4 video format is not supported by this browser. Download video Time: 8:23 min. A look at past and current missions that could be accomplished only at Y-12

  18. Support for solar energy: Examining sense of place and utility-scale development in California

    SciTech Connect (OSTI)

    Carlisle, Juliet E.; Kane, Stephanie L.; Solan, David; Joe, Jeffrey C.

    2014-08-20

    As solar costs have declined PV systems have experienced considerable growth since 2003, especially in China, Japan, Germany, and the U.S. Thus, a more nuanced understanding of a particular public's attitudes toward utility-scale solar development, as it arrives in a market and region, is warranted and will likely be instructive for other areas in the world where this type of development will occur in the near future. Using data collected from a 2013 telephone survey (N=594) from the six Southern Californian counties selected based on existing and proposed solar developments and available suitable land, we examine public attitudes toward solar energy and construction of large-scale solar facilities, testing whether attitudes toward such developments are the result of sense of place and attachment to place. Overall, we have mixed results. Place attachment and sense of place fail to produce significant effects except in terms of perceived positive benefits. That is, respondents interpret the change resulting from large-scale solar development in a positive way insofar as perceived positive economic impacts are positively related to support for nearby large-scale construction.

  19. Support for solar energy: Examining sense of place and utility-scale development in California

    SciTech Connect (OSTI)

    Juliet E. Carlisle; Stephanie L. Kane; David Solan; Jeffrey C. Joe

    2015-07-01

    As solar costs have declined PV systems have experienced considerable growth since 2003, especially in China, Japan, Germany, and the U.S. Thus, a more nuanced understanding of a particular public's attitudes toward utility-scale solar development, as it arrives in a market and region, is warranted and will likely be instructive for other areas in the world where this type of development will occur in the near future. Using data collected from a 2013 telephone survey (N = 594) from the six Southern Californian counties selected based on existing and proposed solar developments and available suitable land, we examine public attitudes toward solar energy and construction of large-scale solar facilities, testing whether attitudes toward such developments are the result of sense of place and attachment to place. Overall, we have mixed results. Place attachment and sense of place fail to produce significant effects except in terms of perceived positive benefits. That is, respondents interpret the change resulting from large-scale solar development in a positive way insofar as perceived positive economic impacts are positively related to support for nearby large-scale construction.

  20. Rigless multizone recompletion using a cement packer placed with coiled tubing: A case history

    SciTech Connect (OSTI)

    Nowak, T.W.; Patout, T.S.

    1997-12-01

    Cement packers have been used for some time when reserve estimates have not justified the cost of major rig remedial work. They typically provide a means of zonal isolation of the last reserves in an existing wellbore. The success of these operations has historically been low. This is predominantly because of poor cement bonding in the annulus between the tubing and production casing. Because of the minimal amount of equipment on location and lack of upfront design work involved, most cement packers are doomed to failure before they are even placed. Cement packers have been placed using a large number of methods. In the Ship Shoal 181 field, Well B-4 would not economically justify a major rig workover, even though there were several uphole gas sands capable of producing in this well. With proper upfront planning and design, it would be economical; however, all these reserves could be produced in a through-tubing process using a cement packer. This case history presents a refined look at existing technology involving placement of a cement packer and reviews problems common to cement-packer completions, including a case history. Solutions are also discussed for successfully completing and recovering reserves from not one but several remaining gas intervals. This paper reviews the design considerations and precautions, along with the production results and economics, for placing what is believed to be the largest cement packer placed through coiled tubing.

  1. Support for solar energy: Examining sense of place and utility-scale development in California

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Carlisle, Juliet E.; Kane, Stephanie L.; Solan, David; Joe, Jeffrey C.

    2014-08-20

    As solar costs have declined PV systems have experienced considerable growth since 2003, especially in China, Japan, Germany, and the U.S. Thus, a more nuanced understanding of a particular public's attitudes toward utility-scale solar development, as it arrives in a market and region, is warranted and will likely be instructive for other areas in the world where this type of development will occur in the near future. Using data collected from a 2013 telephone survey (N=594) from the six Southern Californian counties selected based on existing and proposed solar developments and available suitable land, we examine public attitudes toward solarmore » energy and construction of large-scale solar facilities, testing whether attitudes toward such developments are the result of sense of place and attachment to place. Overall, we have mixed results. Place attachment and sense of place fail to produce significant effects except in terms of perceived positive benefits. That is, respondents interpret the change resulting from large-scale solar development in a positive way insofar as perceived positive economic impacts are positively related to support for nearby large-scale construction.« less

  2. Groundwater was the focus of a special tour that took place recently at

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    was the focus of a special tour that took place recently at the Nevada National Security Site (NNSS). The small tour group, composed mainly of members of the public, got an up-close look at the extensive work that goes into the well operations, groundwater sampling, and monitoring programs at the Site. These activities are helping scientists better understand the movement of contamination resulting from historic underground nuclear tests. "This was an opportunity for some citizens to see

  3. Doug Hollett, Director Geothermal Technologies Office Hot Rocks and Hard Places

    Broader source: Energy.gov (indexed) [DOE]

    Hot Rocks and Hard Places Geothermal Resources Council Annual Meeting - September 30, 2013 Courtesy GRC Courtesy CPike/ACEP Courtesy RAM Power 2 Identify New Geothermal Opportunities * Lowered risk and cost * New prospecting workflow/"Play Fairway" Accelerate a Commercial Pathway to EGS * Frontier Observatory for Research in Geothermal Energy (FORGE) * Reservoir characterization/creation technologies Overcome Deployment Barriers * Regulatory Roadmap: Streamlining * National Geothermal

  4. Hanford Waste Treatment Plant places first complex piping module in Pretreatment Facility

    Office of Energy Efficiency and Renewable Energy (EERE)

    Crews at the Hanford Waste Treatment Plant, also known as the "Vit Plant," placed a 19-ton piping module inside the Pretreatment Facility. The module was lifted over 98-foot-tall walls and lowered into a space that provided less than two inches of clearance on each side and just a few feet on each end. It was set 56 feet above the ground.

  5. Ant Colony Optimization for Mapping, Scheduling and Placing in Reconfigurable Systems

    SciTech Connect (OSTI)

    Ferrandi, Fabrizio; Lanzi, Pier Luca; Pilato, Christian; Sciuto, Donatella; Tumeo, Antonino

    2013-06-24

    Modern heterogeneous embedded platforms, com- posed of several digital signal, application specific and general purpose processors, also include reconfigurable devices support- ing partial dynamic reconfiguration. These devices can change the behavior of some of their parts during execution, allowing hardware acceleration of more sections of the applications. Never- theless, partial dynamic reconfiguration imposes severe overheads in terms of latency. For such systems, a critical part of the design phase is deciding on which processing elements (mapping) and when (scheduling) executing a task, but also how to place them on the reconfigurable device to guarantee the most efficient reuse of the programmable logic. In this paper we propose an algorithm based on Ant Colony Optimization (ACO) that simultaneously executes the scheduling, the mapping and the linear placing of tasks, hiding reconfiguration overheads through prefetching. Our heuristic gradually constructs solutions and then searches around the best ones, cutting out non-promising areas of the design space. We show how to consider the partial dynamic reconfiguration constraints in the scheduling, placing and mapping problems and compare our formulation to other heuristics that address the same problems. We demonstrate that our proposal is more general and robust, and finds better solutions (16.5% in average) with respect to competing solutions.

  6. Mr. Frank Russo, Project Director Bechtel National, Inc. 2435 Stevens Center Place

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NTO. ~,U.S. Department of Energy P.O. Box 450, MSIN 1-6-60 IAIFSO\Richland, Washington 99352 SEP 1 7 Z012 I 2-WTP-0291 Mr. Frank Russo, Project Director Bechtel National, Inc. 2435 Stevens Center Place Richland. Washington 99354 Dear Mr. Russo: CONTRACT NO. DF-AC27-01 RV 14136 -AWARD ELIF 1)ETERMINATION FOR PERIO[D 2 012 -A References: 1 . Contract No. DE-AC27-()IRV 14136 -Section 13.7 Ax\ ard Fee Administration. 2. Performance Evaluation and Measurement Plan (PFN'P) for Award Fee Period 2012-A.

  7. How High Up Is That Place? How Far In The Future Is That Event? - A

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "Up" is a direction that depends on where you stand. "The future" is also a direction, and which direction it is depends on how you move. The first idea is ancient; the latter realization we owe largely to a discovery of Albert Einstein. A B C D E A. Places and Times You're a passenger in a car, taking a trip with some of your family, when you get a call on your mobile phone. As the car continues down the road, you pick up the phone, talk, and then put the phone back where

  8. An environmental sampling model for combining judgment and randomly placed samples

    SciTech Connect (OSTI)

    Sego, Landon H.; Anderson, Kevin K.; Matzke, Brett D.; Sieber, Karl; Shulman, Stanley; Bennett, James; Gillen, M.; Wilson, John E.; Pulsipher, Brent A.

    2007-08-23

    In the event of the release of a lethal agent (such as anthrax) inside a building, law enforcement and public health responders take samples to identify and characterize the contamination. Sample locations may be rapidly chosen based on available incident details and professional judgment. To achieve greater confidence of whether or not a room or zone was contaminated, or to certify that detectable contamination is not present after decontamination, we consider a Bayesian model for combining the information gained from both judgment and randomly placed samples. We investigate the sensitivity of the model to the parameter inputs and make recommendations for its practical use.

  9. In-place stabilization of pond ash deposits by hydrated lime columns

    SciTech Connect (OSTI)

    Chand, S.K.; Subbarao, C.

    2007-12-15

    Abandoned coal ash ponds cover up vast stretches of precious land and cause environmental problems. Application of suitable in situ stabilization methods may bring about improvement in the geotechnical properties of the ash deposit as a whole, converting it to a usable site. In this study, a technique of in-place stabilization by hydrated lime columns was applied to large-scale laboratory models of ash ponds. Samples collected from different radial distances and different depths of the ash deposit were tested to study the improvements in the water content, dry density, particle size distribution, unconfined compressive strength, pH, hydraulic conductivity, and leachate characteristics over a period of one year. The in-place stabilization by lime column technique has been found effective in increasing the unconfined compressive strength and reducing hydraulic conductivity of pond ash deposits in addition to modifying other geotechnical parameters. The method has also proved to be useful in reducing the contamination potential of the ash leachates, thus mitigating the adverse environmental effects of ash deposits.

  10. Study of energy transfer between molecules placed in the vicinity of a bimetal composite nanoparticle

    SciTech Connect (OSTI)

    Daneshfar, Nader E-mail: ndaneshfar@razi.ac.ir

    2015-10-15

    In this study, the problem of energy transfer between two molecules near a bimetallic composite nanoparticle is investigated. The influence of the interaction between metal particles on the intermolecular energy is studied, because when two metal nanoparticles are placed close to each other, their plasmons coupling giving rise to new features. On the other hand, we discuss the transfer of resonance energy between donor and acceptor molecules (a single donor and a single acceptor) in the presence of a nanocomposite containing gold and silver nanoparticles based on the Maxwell-Garnett effective medium theory and within the quasistatic limit. We show that the interaction energy strongly depends on the particle size, the filling factor of metal particles, the intermolecular distance (the distance between the donor and acceptor molecules), and the dielectric constant of host matrix.

  11. Visual probes and methods for placing visual probes into subsurface areas

    DOE Patents [OSTI]

    Clark, Don T.; Erickson, Eugene E.; Casper, William L.; Everett, David M.

    2004-11-23

    Visual probes and methods for placing visual probes into subsurface areas in either contaminated or non-contaminated sites are described. In one implementation, the method includes driving at least a portion of a visual probe into the ground using direct push, sonic drilling, or a combination of direct push and sonic drilling. Such is accomplished without providing an open pathway for contaminants or fugitive gases to reach the surface. According to one implementation, the invention includes an entry segment configured for insertion into the ground or through difficult materials (e.g., concrete, steel, asphalt, metals, or items associated with waste), at least one extension segment configured to selectively couple with the entry segment, at least one push rod, and a pressure cap. Additional implementations are contemplated.

  12. Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use Calibri, 12 point font for this memorandum.) (Effective April 2014) MEMORANDUM FOR: XXXXXXXXXXXXXXXX ASSOCIATE ADMINISTRATOR FOR MANAGEMENT AND BUDGET THROUGH: INGRID KOLB DIRECTOR, OFFICE OF MANAGEMENT FROM: XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX SUBJECT: Request to Reactivate Directive Currently on Hold PURPOSE: The purpose of this memorandum is to request the Directives

  13. Hydraulic and Clean-in-Place Evaluations for a 12.5-cm Annular Centrifugal Contactor at INL

    SciTech Connect (OSTI)

    Troy G. Garn; David H. Meikrantz; Nick R. Mann; Jack D. Law; Terry A. Todd

    2008-09-01

    Hydraulic and Clean-in-Place Evaluations for a 12.5 cm Annular Centrifugal Contactor at the INL Troy G. Garn, Dave H. Meikrantz, Nick R. Mann, Jack D. Law, Terry A. Todd Idaho National Laboratory Commercially available, Annular Centrifugal Contactors (ACC) are currently being evaluated for processing dissolved nuclear fuel solutions to selectively partition integrated elements using solvent extraction technologies. These evaluations include hydraulic and clean-in-place (CIP) testing of a commercially available 12.5 cm unit. Data from these evaluations is used to support design of future nuclear fuel reprocessing facilities. Hydraulic testing provides contactor throughput performance data on two-phase systems for a wide range of operating conditions. Hydraulic testing results on a simple two-phase oil and water system followed by a 30 % Tributyl phosphate in N-dodecane / nitric acid pair are reported. Maximum total throughputs for this size contactor ranged from 20 to 32 liters per minute without significant other phase carryover. A relatively new contactor design enhancement providing Clean-in-Place capability for ACCs was also investigated. Spray nozzles installed into the central rotor shaft allow the rotor internals to be cleaned, offline. Testing of the solids capture of a diatomaceous earth/water slurry feed followed by CIP testing was performed. Solids capture efficiencies of >95% were observed for all tests and short cold water cleaning pulses proved successful at removing solids from the rotor.

  14. Manhattan Project: Places

    Office of Scientific and Technical Information (OSTI)

    Scientists and Security Los Alamos Town Site Life at Los Alamos Los Alamos After the War Oak Ridge The Choice of Oak Ridge, TN Oak Ridge Site Acquisition X-10 Graphite Reactor ...

  15. Market place movements

    SciTech Connect (OSTI)

    1996-10-01

    Historical financial data is provided for the uranium market in graphical and tabular form. Data include uranium spot price range, spot conversion price range, and seperative work units price range. Additional spot market information provided is natural uranium by buyers and sellers. Medium- and long-term data includes average natural uranium prices, and natural uranium market by buyers and sellers. Information on US contracted supply and demand and uranium production in Australia, Canada, and the US is given.

  16. Development of NZP ceramic based {open_quotes}cast-in-place{close_quotes} diesel engine port liners

    SciTech Connect (OSTI)

    Nagaswaran, R.; Limaye, S.Y.

    1996-02-01

    BSX (Ba{sub 1+x}Zr{sub 4}P{sub 6-2x}Si{sub 2x}O{sub 24}) and CSX (Ca{sub l-x}Sr{sub x}Zr{sub 4}P{sub 6}O{sub 24}) type NZP ceramics were fabricated and characterized for: (i) thermal properties viz., thermal conductivity, thermal expansion, thermal stability and thermal shock resistance; (ii) mechanical properties viz., flexure strength and elastic modulus; and (iii) microstructures. Results of these tests and analysis indicated that the BS-25 (x=0.25 in BSX) and CS-50 (x=0.50 in CSX) ceramics had the most desirable properties for casting metal with ceramic in place. Finite element analysis (FEA) of metal casting (with ceramic in place) was conducted to analyze thermomechanical stresses generated and determine material property requirements. Actual metal casting trials were also conducted to verify the results of finite element analysis. In initial trials, the ceramic cracked because of the large thermal expansion mismatch (hoop) stresses (predicted by FEA also). A process for introduction of a compliant layer between the metal and ceramic to alleviate such destructive stresses was developed. The compliant layer was successful in preventing cracking of either the ceramic or the metal. In addition to these achievements, pressure slip casting and gel-casting processes for fabrication of NZP components; and acoustic emission and ultrasonics-based NDE techniques for detection of microcracks and internal flaws, respectively, were successfully developed.

  17. Phase mixing of upper hybrid oscillations in a cold inhomogeneous plasma placed in an inhomogeneous magnetic field

    SciTech Connect (OSTI)

    Sarkar, Anwesa; Maity, Chandan; Chakrabarti, Nikhil

    2013-05-15

    We study phase mixing/wave breaking phenomena of upper hybrid modes in a cold inhomogeneous plasma placed in an inhomogeneous magnetic field. Inhomogeneities both in the background ion density and magnetic field profile are treated as periodic in space but independent in time. The Lagrangian fluid description is employed to obtain an exact solution of this fully nonlinear problem. It is demonstrated that the upper hybrid modes, excited by an initial local charge imbalance, break via phase mixing, induced by the inhomogeneities. It is also shown that it is possible to avoid phase mixing in excited upper hybrid oscillations in an inhomogeneous plasma containing a finite amplitude ion density fluctuation. The choice of external magnetic field is shown to have a key role in avoiding phase mixing in such oscillations. The relevance of our investigation regarding the particle acceleration in an inhomogeneous plasma has also been discussed.

  18. Multi-facet concentrator of solar setup for irradiating the objects placed in a target plane with solar light

    DOE Patents [OSTI]

    Lewandowski, Allan A.; Yampolskiy, Vladislav; Alekseev, Valerie; Son, Valentin

    2001-01-01

    According to the proposed invention, this technical result is achieved so that many-facet concentrator of a solar setup for exposure of objects, placed in a target plane, to the action of solar radiation containing a supporting frame and facets differing by that the facets of the concentrator are chosen with spherical focusing reflective surfaces of equal focal lengths and with selective coatings reflecting a desired spectral fraction of solar radiation, and are arranged on the supporting frame symmetrically with respect to the common axis of the concentrator, their optical axes being directed to the single point on the optical axis of the concentrator located before the nominal focus point of the concentrator and determining the position of arranging the target plane.

  19. Effect of doping on growth and field emission properties of spherical carbon nanotube tip placed over cylindrical surface

    SciTech Connect (OSTI)

    Santolia, Isha; Tewari, Aarti; Sharma, Suresh C.; Sharma, Rinku

    2014-06-15

    Theoretical investigations to study the effect of doping of hetero-atoms on the growth and field emission properties of Carbon Nanotubes (CNTs) tip placed over a cylindrical surface in complex plasma have been carried out. A theoretical model incorporating kinetics of plasma species such as electron, ions, and neutral atoms including doping elements like nitrogen (N) and boron (B) and energy balance of CNTs in a complex plasma has been developed. The effect of doping elements of N and B on the growth of CNTs, namely, the tip radius has been carried out for typical glow discharge plasma parameters. It is found that N and B as doping elements affect the radius of CNTs extensively. We obtain small radii of CNT doped with N and large radius of CNT doped with B. The field emission characteristics from CNTs have therefore been suggested on the basis of results obtained. Some of theoretical results are in compliance with the existing experimental observations.

  20. Measurements of stable isotope ratios in milk samples from a farm placed in the mountains of Transylvania

    SciTech Connect (OSTI)

    Magdas, D. A. Cristea, G. Bot, A.; Puscas, R.; Radu, S.; Mirel, V.; Cordea, D. V.; Mihaiu, M.

    2013-11-13

    Product origin is of great importance for consumers especially because its association in consumer's perception with food quality, freedom from disease or pollution. Stable isotope ratio analysis is a powerful technique in food authenticity and traceability control which has been introduced within the European wine industry to ensure authenticity of wine provenance and to detect adulteration. Isotopic ratios measurements have also been successfully to other food commodities like: fruit juices, honey and dairy foods. The δ{sup 18}O and δ{sup 2}H content in milk water reflects the isotope composition of the ground water drunk by animals. Seasonal effects are also very important: in summer, milk water contains higher δ{sup 18}O and δ{sup 2}H values due to the fresh plants that are ate by animals. Relative carbon stable isotope abundances in total milk reflect the isotopic composition of the diet fed to the dairy cows. In this study the hydrogen, oxygen and carbon isotopic composition of 15 milk samples coming from a unit placed in the mountains of Transylvania was investigated. The distribution of the obtained isotopic values was than discussed taking into account that all the animals were feed with the same type of forage and consumed water was taken from the same source.

  1. Axial and transverse acoustic radiation forces on a fluid sphere placed arbitrarily in Bessel beam standing wave tweezers

    SciTech Connect (OSTI)

    Mitri, F.G.

    2014-03-15

    The axial and transverse radiation forces on a fluid sphere placed arbitrarily in the acoustical field of Bessel beams of standing waves are evaluated. The three-dimensional components of the time-averaged force are expressed in terms of the beam-shape coefficients of the incident field and the scattering coefficients of the fluid sphere using a partial-wave expansion (PWE) method. Examples are chosen for which the standing wave field is composed of either a zero-order (non-vortex) Bessel beam, or a first-order Bessel vortex beam. It is shown here, that both transverse and axial forces can push or pull the fluid sphere to an equilibrium position depending on the chosen size parameter ka (where k is the wave-number and a the spheres radius). The corresponding results are of particular importance in biophysical applications for the design of lab-on-chip devices operating with Bessel beams standing wave tweezers. Moreover, potential investigations in acoustic levitation and related applications in particle rotation in a vortex beam may benefit from the results of this study. -- Highlights: The axial and transverse forces on a fluid sphere in acoustical Bessel beams tweezers are evaluated. The attraction or repulsion to an equilibrium position in the standing wave field is examined. Potential applications are in particle manipulation using standing waves.

  2. Occupant-in-Place Energy Efficiency Retrofit in a Group Home for 30% Energy Savings in Climate Zone 4

    SciTech Connect (OSTI)

    Moore, M.

    2013-08-01

    Energy efficiency retrofits (EERs) face many challenges on the path to scalability. Limited budgets, cost effectiveness, risk factors, and accessibility impact the type and the extent of measures that can be implemented feasibly to achieve energy savings goals. Group home retrofits can face additional challenges than those in single family homes - such as reduced access (occupant-in-place restrictions) and lack of incentives for occupant behavioral change. This project studies the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%. This short term test report chronicles the retrofit measures specified, their projected cost-effectiveness using building energy simulations, and the short term test results that were used to characterize pre-retrofit and post-retrofit conditions. Additionally, the final report for the project will include analysis of pre- and post-retrofit performance data on whole building energy use, and an assessment of the energy impact of occupant interface with the building (i.e., window operation). Ultimately, the study's results will be used to identify cost effective EER measures that can be implemented in group homes, given constraints that are characteristic of these buildings. Results will also point towards opportunities for future energy savings.

  3. Oil- and gas-in-place assessment under geological uncertainty, Jobal-Zuron area, Guarico subbasin, central Venezuela

    SciTech Connect (OSTI)

    Martinez, G.

    1989-03-01

    Oil- and gas-in-place assessment has been a major problem in the evaluation of the Jobal-Zuron area of the Guarico subbasin of the Eastern Venezuela basin. The area is now undergoing an integrated appraisal in order to determine its economic viability for supplying the Venezuelan domestic gas market. The area has been known as a gas producer from the Miocene Chaguaramas Formation. Currently stated reserves are estimated at 21.7 million bbl of condensate and 313.8 billion ft/sup 3/ of gas; daily production is 23 million ft/sup 3/ of gas from nine wells. Recent tests and appaisals would increase reserves to 60 million bbl of condensate and 888.6 billion ft/sup 3/ of gas and daily production up to 4.2 million ft/sup 3/ of gas per well. Although the Venezuelan domestic gas market is increasing, the Jobal-Zuron area is still lacking deep geological and reserve definition. The area is, geologically speaking, one of the most complex in Venezuela from both the stratigraphic and structural points of view. The Guarico subbasin was tectonically very active during the upper Miocene-Pliocene; compaction and diagenesis are the main factors affecting porosity.

  4. Occupant-in-Place Energy Efficiency Retrofit in a Group Home for 30% Energy Savings in Climate Zone 4

    SciTech Connect (OSTI)

    Moore, Mike

    2013-08-01

    Energy efficiency retrofits (EERs) face many challenges on the path to scalability. Limited budgets, cost effectiveness, risk factors, and accessibility impact the type and the extent of measures that can be implemented feasibly to achieve energy savings goals. Group home retrofits can face additional challenges than those in single family homes – such as reduced access (occupant-in-place restrictions) and lack of incentives for occupant behavioral change. This project studies the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%. This short term test report chronicles the retrofit measures specified, their projected cost effectiveness using building energy simulations, and the short term test results that were used to characterize pre-retrofit and post-retrofit conditions. Additionally, the final report for the project will include analysis of pre- and post-retrofit performance data on whole building energy use, and an assessment of the energy impact of occupant interface with the building (i.e., window operation). Ultimately, the study’s results will be used to identify cost-effective EER measures that can be implemented in group homes, given constraints that are characteristic of these buildings. Results will also point towards opportunities for future energy savings.

  5. Determination of the original-gas-in-place and aquifer properties in a water-drive reservoir by optimization technique

    SciTech Connect (OSTI)

    Chen, T.L.; Lin, Z.S.; Chen, Y.L.

    1995-10-01

    The purpose of this study was to estimate the original-gas-in-place (OGIP) of a water-drive reservoir using optimization algorithm for Port Arthur field, Texas, US. The properties of the associate aquifer were also obtained. The good agreement, between the results from this study and those from simulation study, would be demonstrated in this paper. In this study, material balance equation for a gas reservoir and van Everdingen-Hurst model for an aquifer were solved simultaneously to calculate cumulative gas production. The result was then compared with cumulative gas production measured in the field that observed at each pressure. The following parameters were manually adjusted to obtain: OGIP, thickness of the aquifer, water encroachment angle, ratio of aquifer to reservoir radius, and aquifer`s permeability. The procedure was then applied with simplex technique, an optimization algorithm, to adjust parameters automatically. When the difference between cumulative gas production calculated and observed was minimal, the parameters used in the model would be the results obtained. A water-drive gas reservoir, ``C`` sand gas reservoir in Port Arthur field, which had produced for about 12 years, was analyzed successfully. The results showed that the OGIP of 60.6 BCF estimated in this study was favorably compared with 56.2 BCF obtained by a numerical simulator in other study. In addition, the aquifer properties that were unavailable from the conventional plotting method can be estimated from this study. The estimated aquifer properties from this study were compared favorably with the core data.

  6. Place Based STEM: Leveraging Local Resources to Engage K-12 Teachers in Teaching Integrated STEM and for Addressing the Local STEM Pipeline

    SciTech Connect (OSTI)

    Dr. Louis Nadelson; Anne Louise Seifert; Meagan McKinney

    2014-06-01

    Business, industry, parks, nature settings, government infrastructure, and people, can be invaluable resources for connecting STEM curriculum within context which results in conditions ideal for promoting purposeful learning of authentic STEM content. Thus, community-based STEM resources offer ideal context for teaching STEM content. A benefit of focusing teacher attention on these contextual, content aligned resources is that they are in every community; making place-based STEM education a possibility, regardless of the location of STEM teaching and learning. Further, associating STEM teaching and learning with local resources addresses workforce development and the STEM pipeline by exposing students to STEM careers and applications in their local communities. The desire to align STEM teaching and learning with local STEM related resources guided the design of our week-long integrated STEM K-12 teacher professional development (PD) program, i-STEM. We have completed four years of our i-STEM PD program and have made place-based STEM a major emphasis of our curriculum. This report focuses on the data collected in the fourth year of our program. Our week-long i-STEM PD served over 425 educators last summer (2013), providing them with in depth theme-based integrated STEM short courses which were limited to an average of 15 participants and whole group plenary sessions focused around placed based integrated STEM, inquiry, engineering design, standards and practices of Common Core and 21st Century skills. This state wide PD was distributed in five Idaho community colleges and took place over two weeks. The STEM short courses included topics on engineering for sustainability, using engineering to spark interest in STEM, municipal water systems, health, agriculture, food safety, mining, forestry, energy, and others. Integral to these short courses were field trips designed to connect the K-12 educators to the resources in their local communities that could be leveraged

  7. ACAA pavement manual. Recommended practice: Coal fly ash in pozzolanic stabilized mixtures for flexible pavement systems

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    The purpose of this manual is to guide pavement design engineers, materials engineers, and construction managers in the design and construction of flexible pavement systems in which low- to high-strength Pozzolanic Stabilized Mixtures' ( PSMs') serve as base layers. A PSM incorporates coal fly ash in combination with activators, aggregates and water. Each of three design methods is useful for determining the thickness of a PSM base layer for a flexible pavement system: Method A - American Association of State Highway and Transportation Officials (AASHTO) flexible pavement design procedures, using structural layer coefficients; Method B - Mechanistic pavement design procedures, using resilient modulus values for the pavement layers; and Method C - A combination of Method A and Method B, using mechanistic design concepts for determining pavement layer coefficients. PSMs offer several advantages: PSMs are strong, durable mixtures using locally available materials; PSMs are economically competitive with properly engineered full-depth asphalt or crushed stone base courses; PSMs are suited to stabilizing recycled base mixtures; and PSMs are placed and compacted with conventional construction equipment. To provide the needed guidance for capturing the long-term service and cost-saving features of a PSM design, this manual details the following: a procedure for proportioning PSMs; thickness design procedures which include base layer and asphalt wearing course; and proven techniques for PSM mixing and base layer construction.

  8. Better Place | Open Energy Information

    Open Energy Info (EERE)

    Bay Area Sector: Vehicles Product: Electric vehicle infrastructure company building a battery swap out network Website: www.betterplace.com Coordinates: 37.3949615,...

  9. Bright Lights From Dark Places

    Broader source: Energy.gov [DOE]

    The largest three-dimensional map of the universe ever made? Find out how scientists are using black holes to illuminate the distant parts of the universe in detail.

  10. Photos placed in horizontal position

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File s ystem Lustre Panasas TradiAonal Network F ile S ystem ( NFS), E xtended F ile s ystem ( EXT), e tc. 4 Tri---Lab t ools Parallel F ile T...

  11. A great place to work

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 6, 2016 Los Alamos National Laboratory: now hiring. Apply online at lanl.govcareers. Los Alamos National Laboratory: now hiring. Apply online at lanl.govcareers. Contacts ...

  12. Finding Funding in Unexpected Places

    Broader source: Energy.gov [DOE]

    We hear a lot of questions from consumers who want to know what they can do to improve their homes, and what money, tax credits, and the like are out there.

  13. Final Report: Part 1. In-Place Filter Testing Instrument for Nuclear Material Containers. Part 2. Canister Filter Test Standards for Aerosol Capture Rates.

    SciTech Connect (OSTI)

    Brown, Austin Douglas; Runnels, Joel T.; Moore, Murray E.; Reeves, Kirk Patrick

    2014-11-02

    A portable instrument has been developed to assess the functionality of filter sand o-rings on nuclear material storage canisters, without requiring removal of the canister lid. Additionally, a set of fifteen filter standards were procured for verifying aerosol leakage and pressure drop measurements in the Los Alamos Filter Test System. The US Department of Energy uses several thousand canisters for storing nuclear material in different chemical and physical forms. Specialized filters are installed into canister lids to allow gases to escape, and to maintain an internal ambient pressure while containing radioactive contaminants. Diagnosing the condition of container filters and canister integrity is important to ensure worker and public safety and for determining the handling requirements of legacy apparatus. This report describes the In-Place-Filter-Tester, the Instrument Development Plan and the Instrument Operating Method that were developed at the Los Alamos National Laboratory to determine the “as found” condition of unopened storage canisters. The Instrument Operating Method provides instructions for future evaluations of as-found canisters packaged with nuclear material. Customized stainless steel canister interfaces were developed for pressure-port access and to apply a suction clamping force for the interface. These are compatible with selected Hagan-style and SAVY-4000 storage canisters that were purchased from NFT (Nuclear Filter Technology, Golden, CO). Two instruments were developed for this effort: an initial Los Alamos POC (Proof-of-Concept) unit and the final Los Alamos IPFT system. The Los Alamos POC was used to create the Instrument Development Plan: (1) to determine the air flow and pressure characteristics associated with canister filter clogging, and (2) to test simulated configurations that mimicked canister leakage paths. The canister leakage scenarios included quantifying: (A) air leakage due to foreign material (i.e. dust and hair

  14. Petroleum Supply Monthly

    U.S. Energy Information Administration (EIA) Indexed Site

    June 2016 Appendix B PSM Explanatory Notes Preface ............................................................................................................................................................................................................... 126 Appendix B. Explanatory Notes ....................................................................................................................................................................... 127 1. Overview

  15. Petroleum Supply Monthly

    U.S. Energy Information Administration (EIA) Indexed Site

    May 2015 Appendix B PSM Explanatory Notes Preface ............................................................................................................................................................................................................... 125 Appendix B. Explanatory Notes ....................................................................................................................................................................... 126 1. Overview

  16. FGD gypsum's place in American agriculture

    SciTech Connect (OSTI)

    Haynes, C.

    2007-07-01

    Surface cracks and soil clumps form when saline-sodic, high-clay soil dries out. Treatment with FGD gypsum and irrigation water flowing into these cracks leaches salts until the aggregates swell and the cracks close up. The article describes research projects to develop agricultural uses of FGD gypsum from coal-fired power plants that have been conducted by university researchers and USDA-Agricultural Research Service scientists.

  17. Property:Place | Open Energy Information

    Open Energy Info (EERE)

    CB Richard Ellis CBD Energy Ltd CCBI, Inc. CCLRC Rutherford Appleton Laboratory CCT Solar CDH Energy CDI Corporation CDM Accreditation Panel CDM AP CDM Center of Excellence...

  18. Partnering Institution Name Partnering Institution Name Place...

    Open Energy Info (EERE)

    Boise Idaho Test Evaluation Partner Electricity Resources Building Systems Integration Solar Systems Solar Systems Abbotsford Australia Electricity Resources Building Systems...

  19. Category:Places | Open Energy Information

    Open Energy Info (EERE)

    Agenda, Kansas Agenda, Wisconsin Agoura Hills, California Agra, Kansas Agra, Oklahoma Agua Dulce, Texas Agua Fria, New Mexico Aguilar, Colorado Ahmeek, Michigan Ahnapee,...

  20. Template:ExperimentalPlace | Open Energy Information

    Open Energy Info (EERE)

    Feedback Contact needs updating Image needs updating Reference needed Missing content Broken link Other Additional Comments Cancel Submit Category: Experimental Templates...

  1. OSHA safety regulation calls for step-by-step approach

    SciTech Connect (OSTI)

    Bellomo, P.J. (Arthur D. Little Inc., Houston, TX (US))

    1992-06-01

    The U.S. Occupational Safety and Health Administration's long-awaited process safety management (PSM) regulation mandates the implementation of a PSM program at facilities handling highly hazardous materials, including oil refineries and petrochemical plants. This article presents a step-by-step PSM program compliance strategy, delineated and explored through practical examples.

  2. Using Process Safety Management to improve plant operability

    SciTech Connect (OSTI)

    Sutton, I.S.

    1995-12-31

    The Process Safety Management (PSM) standard, 29 CFR 1910.119, was published in draft from in July 1990 and has been in force since May 1992. The standard requires that all companies that handle hazardous materials must have in place a management program to minimize the chance of accidents, and to reduce the consequences of such accidents should they occur. The purpose of this paper is to provide some preliminary guidance as to how PSM activities can be managed so that, as the compliance part of the work is completed, the best return on the investment can be achieved. One final point should be made about safety and operability. The two are closely linked, but they are not identical. In other words, a safety improvement program will almost certainly lead to reduced economic losses, similarly a reliability improvement program will almost certainly reduce injuries, but there are some differences that need to be taken account. These include: (1) Additional safety equipment may reduce reliability. (2) A reliable plant does not undergo many shutdowns. Therefore, operators have less practice with the implementation of shutdown and startup procedures than they would otherwise. (3) Unsafe engineering practices, such as the use of temporary bypasses and jumper lines, may increase operability, but they reduce safety.

  3. Placing UESC Task Orders Under the GSA Areawide

    Broader source: Energy.gov [DOE]

    Webinar provides attendees with an overview of the contracting options and services available from their local utility companies to engineer, finance and install cost effective energy and water savings projects.

  4. Greensburg, Kansas: A Better, Greener Place to Live

    SciTech Connect (OSTI)

    2009-10-01

    The brochure highlights efforts to rebuild green in Greensburg, KS, and mentions DOE's role in rebuilding. The layout is designed to be used as a template for other cities in similar situations.

  5. Greensburg, Kansas: A Better, Greener Place to Live (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-10-01

    This Brochure is for Greensburg city leadership (Chamber of Commerce, Mayor's Office, and others) to use to attract visitors and businesses to Greensburg, and to ensure the city?s commitment to sustainability. Content includes EERE subject matter and mentions DOE's role in rebuilding. The layout is designed to be used as a template for other cities in similar situations.

  6. Name Address Place Zip Sector Product Stock Symbol Year founded...

    Open Energy Info (EERE)

    Energy Inc Suite Inco Innovation Centre Memorial University of Newfoundland PO Box St John s A1C S7 Marine and Hydrokinetic http http www greyislandenergy com Canada Gulfstream...

  7. Do nuclear reactions take place under chemical stimulation?

    SciTech Connect (OSTI)

    Bockris, J.O.; Lin, G.H.; Bush, R.T.

    1996-09-01

    Several examples of nuclear reactions occurring under the stimulation of chemical type energies are given. The production of tritium from deuterium in Pd has more than 100 published confirmations. Three models suggest circumstances such that barriers between nucleii may become transparent. 24 refs.

  8. Property:Incentive/AddlPlaceStates | Open Energy Information

    Open Energy Info (EERE)

    Energy Development Fund (Kentucky) + Kentucky + Alternative Energy Zone (Ohio) + Ohio + Alternative Renewable Fuels 'Plus' Research and Development Fund (Ontario, Canada) +...

  9. Property:AdditionalBenefitPlaces | Open Energy Information

    Open Energy Info (EERE)

    + Georgia + F FirstEnergy Service Company Smart Grid Project + Pennsylvania + I ISO New England, Incorporated Smart Grid Project + Connecticut +, Maine +, New Hampshire +,...

  10. CERN and LHC - their place in global science

    ScienceCinema (OSTI)

    None

    2011-10-06

    The Large Hadron Collider (LHC) is the largest scientific instrument in the world. It brings into collision intense beams of protons and ions to explore the structure of matter and investigate the forces of nature at an unprecedented energy scale, thus serving a community of some 7,000 particle physicists from all over the world.

  11. Is your stormwater pollution prevention plan in place

    SciTech Connect (OSTI)

    Sparks, C.J. )

    1994-05-01

    Some of the uncertainty surrounding the National Pollutant Discharge Elimination System (NPDES) stormwater requirements were clarified by the general permits issued by the Environmental Protection Agency (EPA) and by a number of states. However, many questions remain. This paper explains what Stormwater Pollution Prevention Plans requirements are; how to get started; and follow-through.

  12. Property:Incentive/AddlPlaceCity | Open Energy Information

    Open Energy Info (EERE)

    Zone Building Permits (District of Columbia) + District of Columbia + G Ground Water Management Act (Virginia) + Chesapeake, Virginia +, Franklin, Virginia +, Hampton,...

  13. Placing power linres : GIS helps site energy corridors.

    SciTech Connect (OSTI)

    Kuiper, J. A.; Cantwell, B.; Hlohowskyj, I.; Moore, H. R.

    2011-08-01

    Turn the lights on when you enter a room, then turn the lights off when you leave. Most of us repeat this sequence many times each day, and never give it another thought. But that seemingly simple light switch on the wall connects us to one of the most complex systems in the world: the electrical grid. Most of the United States is served by a highly reliable and adequate supply of electrical power, which is distributed through a grid of thousands of miles of electricity-transmission lines. However, as the electricity-supply infrastructure ages and consumer demand for electricity grows, the capacity to deliver electrical power hasn't kept pace with demand, and upgrading the electrical-transmission grid has become a more pressing need. From 1988-1998, demand for transmission grew by 30 percent while transmission grew by only 15 percent. From 1999-2009, demand grew by 20 percent and transmission by only 3 percent Despite a short-term decline related to the economic downturn and improved efficiency, U.S. energy consumption is expected to increase by 14 percent between 2008 and 2035. This growth will drive the need to develop viable routes for new transmission lines. Because transmission lines extend over large distances, they typically cross many federal, tribal, state, local and private land jurisdictions, each with a complex and varying set of siting issues and land-management practices. And as the existing grid needs improvement to meet growing demand, the U.S. is rapidly developing renewable energy sources, particularly solar and wind energy, often in areas far removed from existing electricity-transmission infrastructure and energy-consumption areas.

  14. EXO project equipment successfully placed underground at WIPP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    were lowered into the mine by hoist and then transported through almost a kilometer of tunnels to the North Experimental Area with a 41-ton forklift. DOE made WIPP's unique...

  15. From the Lab to the Market Place to Standards

    SciTech Connect (OSTI)

    Arthur Rosenfeld

    2007-02-05

    Yes, thats Billions, not Millions. Its equivalent to avoiding 35 million barrels/day of oil (out of World daily use of 85 Mbod), or getting 1 Billion cars off the road (but the world has only 600 Million cars). And California is doing even better than the US. All this was so easy and few people even noticed. Energy efficiency is the cheapest, faster, most reliable way to reduce the emissions of CO2. It wont solve the entire problem, but it will get us half way there, and profitably.

  16. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    Avenida De La Playa La Jolla California Efficiency Created high power yellow amber red LED light technology http www quanlight com Southern CA Area QuantaSol Limited...

  17. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    com Texas Area HelioVolt Inc HelioVolt Inc E Riverside Dr Austin Texas Solar Thin film solar panel producer http www heliovolt net Texas Area Horizon Wind Energy Horizon Wind...

  18. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    environmental costs Gaiam Real Goods Gaiam Real Goods W So Boulder Rd Boulder Colorado Solar PV panel efficient lighting distributor http www gaiam com realgoods Rockies Area...

  19. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    CREATIVE ELECTRO POWER CREATIVE ELECTRO POWER kazipara mirpur Dhaka Solar IPS CONTROLLER Solar panel http www smmbd com Southern CA Area Caprock Roofing Caprock Roofing Lewisville...

  20. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    Research Center Brookpark Rd Cleveland Ohio Biofuels Carbon Efficiency Renewable Energy Solar Wind energy Research and development http www nasa gov centers glenn home index html...

  1. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    integrates services including the research development production sales of polysilicon solar panel CEEG Shanghai Solar Science Technology CEEG Shanghai Solar Science Technology...

  2. Property:Incentive/AddlPlace | Open Energy Information

    Open Energy Info (EERE)

    (Massachusetts) + Chicopee Electric Light Department + City and County of Denver - Solar Panel Permitting (Colorado) + City and County of Denver + City of Austin - Zoning...

  3. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    Point Drive Fort Collins Colorado Solar Solar cell passive solar architectural glass solar grid tie inverter semiconductor flat panel display data storage http www advanced...

  4. Boise State University Places First in DOE's Collegiate Wind...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Las Vegas, Nevada, where they were tasked with designing, testing, and constructing a lightweight, transportable wind turbine that could be used to power small electronic devices. ...

  5. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    com Genifuel Genifuel Carrigan Cir Salt Lake City Utah Biofuels Renewable Natural Gas http www genifuel com Rockies Area Gevo Inc Gevo Inc Inverness Drive South Englewood...

  6. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    domestic heating systems combining solar passive wood burning geothermal heat pumps and fossil fuel Elemental Energy Elemental Energy SW nd Ave Portland Oregon United States...

  7. Property:Incentive/AddlPlaceUtility | Open Energy Information

    Open Energy Info (EERE)

    Canada) + Maritime Electric + N Net Metering (New Brunswick, Canada) + NB Power + Nuclear Power Plant Construction Support (North Carolina) + North Carolina + R Renewable and...

  8. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    Industries GmbH SunCoal Industries GmbH K nigs Wusterhausen Germany Producer of bio coal SunConnex International BV SunConnex International BV Amsterdam Netherlands Solar Dutch...

  9. National Science Bowl Second Place Winners Explore Colorado

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Bowl Regional Roundup National Science Bowl Regional Roundup March 18, 2015 - 2:33pm Addthis Photo courtesy of National Renewable Energy Laboratory. Photo courtesy of National Renewable Energy Laboratory. Pat Adams Pat Adams Digital Content Specialist, Office of Public Affairs National Science Bowl Regional Roundup It's like March Madness for science students. Storified by Energy Department * Tue, May 05 2015 15:08:26 2015ScienceBowl125 * National Renewable Energy Lab To quote President

  10. The place for sodars in a high-technology environment.

    SciTech Connect (OSTI)

    Coulter, R. L.

    1998-06-12

    In an era of increasingly complex technology, some of the atmospheric quantities most difficult to measure and observe are yielding their secrets to increasingly complex instruments and combinations of instruments. For example, water vapor profiles, a long-time nemesis to detailed examination, have become measurable with the use of Raman lidar; temperature profile measurements are becoming relatively routine with radio acoustic sounding systems (RASSs) or infrared Fourier transform instrumentation such as the atmospheric emitted radiance interferometer (AERI); and radar, lidar, or combinations of the two are enabling wind profile measurements to increasing altitudes. What, then, is the role of the relatively pedestrian sodar in such an era? Because the sodar's propagation speed in the atmosphere is six orders of magnitude smaller than that of its electromagnetic counterparts (3 x 10{sup 2} vs. 3 x 10{sup 8} m/s), severely limiting its rate of interrogation, and because the sodar's signal limit frequency modulation techniques, many high-technology advances associated with enormous increases in computation speed and available memory have had relatively little direct impact on acoustic remote sensing. However, the principal elements of acoustic remote sensing continue to make it a useful, even essential, tool for obtaining a better understanding of the physics of the lower atmosphere. The sodar's ''slow'' propagation speed provides relatively easy access to the region between 10 m and several hundred meters above the surface that is often inaccessible to other instruments. This is the region of the atmosphere where conditions often change radically with height, the ''matching'' region between large-scale forcing and small-scale surface heterogeneities that can have large effects on human activity. The atmosphere provides signals for sodars that are rich in content because the phase speed of sound is dependent on the atmosphere itself and is tied directly to the atmosphere's temperature and wind structure. Hence, the signals from acoustic remote sensing instruments can provide boundary conditions crucial for the proper operation of numerical models of the atmosphere whose output is becoming increasingly important in individual and business decision making.

  11. Institution Name Institution Name Address Place Zip Notes Website...

    Open Energy Info (EERE)

    Avenue Cambridge Massachusetts http web mit edu eel Greater Boston Area MIT Energy Science and Engineering Laboratory MIT Energy Science and Engineering Laboratory...

  12. From the Lab to the Market Place to Standards

    SciTech Connect (OSTI)

    Rosenfeld, Arthur

    2007-02-05

    Energy efficiency is the cheapest, faster, most reliable way to reduce the emissions of CO2. It won't solve the entire problem, but it will get us half way there, and profitably.

  13. Greensburg, Kansas: A Better, Greener Place to Live (Revised) (Brochure)

    Broader source: Energy.gov [DOE]

    Content includes EERE subject matter and mentions DOE's role in rebuilding. The layout is designed to be used as a template for other cities in similar situations.

  14. Property:Incentive/Cont4Place | Open Energy Information

    Open Energy Info (EERE)

    Rock, Arkansas + M Mandatory Shoreland Zoning Act (Maine) + Presque Isle, Maine + O OTEC - Agricultural Energy Efficiency Rebate Programs (Oregon) + La Grande, Oregon + OTEC -...

  15. 140 Million Places to Save Energy | Department of Energy

    Energy Savers [EERE]

    851 Construction Safety Program 10 CFR 851 Construction Safety Program June 16, 2015 Presenter: Bob Legard and Pete Wells, HAMMER Training Center, Richland, WA Topics Covered: DOE safety statistics 851 overview Employee rights Contractor responsibilities 851 challenges 10 CFR 851 Construction Safety Program (952.57 KB) More Documents & Publications Job Safety and Health Poster Focus Group Meeting (Topical Meeting) 10 CFR 851 Worker Safety and Health Program Frequently Asked Questions -

  16. Sheltering in Place | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    everyone inside (including pets). Close all doors and windows. Turn off and close all ventilation systems, including: Air conditioning Attic & exhaust fans Furnaces Fireplace...

  17. Property:Incentive/Cont3Place | Open Energy Information

    Open Energy Info (EERE)

    Gunnison, Lake, and Pitkin Counties - Energy Smart Colorado Loan Program (Colorado) + Avon, Colorado + El Paso Electric Company - Residential Solutions Program (Texas) + Texas +...

  18. Name Name Address Place Zip Category Sector Telephone number...

    Open Energy Info (EERE)

    Hydro Marine and Hydrokinetic http acep uaf edu facilities tanana river hydrokinetic test site aspx Alden Research Laboratory Inc Alden Research Laboratory Inc Shrewsbury Street...

  19. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    EV Drive Train and Services http www aevehicles com Rockies Area American Wind Power Hydrogen LLC American Wind Power Hydrogen LLC New York New York Hydro Hydrogen Vehicles AWP H...

  20. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    ANV Partners ANV Partners Denver Colorado Hydro Hydrogen Services Solar Wind energy AQWON Motors AQWON Motors Speinshart Germany Hydro Hydrogen AQWON Motors has developed the first...

  1. Property:Incentive/AddlPlaceCounty | Open Energy Information

    Open Energy Info (EERE)

    + Anne Arundel County, Maryland + B Baltimore County - Solar and Geothermal Equipment Property Tax Credit (Maryland) + Baltimore County, Maryland + Baltimore County - Wind...

  2. Design and put in place institutional structures and processes...

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  3. Organization Organization Address Place Zip Notes Website Region

    Open Energy Info (EERE)

    Boston Massachusetts http cleantechboston com Greater Boston Area Consortium for Energy Efficiency Consortium for Energy Efficiency North Washington St Boston Massachusetts http...

  4. Locating Climate Insecurity: Where Are the Most Vulnerable Places...

    Open Energy Info (EERE)

    in Africa? AgencyCompany Organization: The Robert Strauss Center Topics: Co-benefits assessment, Background analysis Resource Type: Publications Website: ccaps.strausscenter.o...

  5. Scandium places aluminium welding on a new plateau

    SciTech Connect (OSTI)

    Irving, B.

    1997-07-01

    An interesting new development in nonferrous metallurgy seems to be taking the world by storm. The topic is scandium, a rare metal that is now being mined in the Ukraine. Known for its toughness, it was formerly a top secret material used in fighter planes, including the MIG 29, during the existence of the Soviet Union. This metal is now being introduced into a variety of aluminum alloys in this country, both in base metal and filler metal forms. The results are increases in strength, fatigue life and weldability. US interest in scandium-containing products is burgeoning, examples include aircraft, components for automobiles and trucks, high-speed trains, and boats. The technology is being developed and implemented at two laboratories, one in Baltimore, MD, and the other in Kiev, Ukraine. Both laboratories belong to Ashurst Technology Ltd., Hamilton, Bermuda. The author recently visited the Baltimore laboratory where he learned more about scandium and its current and potential effects on industry. This report documents what he learned.

  6. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    manufacturing and marketing of display products typically OLED Organic Light Emitting Diode Display Vista International Inc Vista International Inc Englewood Colorado...

  7. United Indigenous Voices Address Sustainability: Climate Change and Traditional Places

    Broader source: Energy.gov [DOE]

    At the First Stewards Symposium, over 300 industry and policy leaders from around the nation will discuss four main themes generated from the 2012 First Stewards Symposium that address issues...

  8. Template:InfoForPlace | Open Energy Information

    Open Energy Info (EERE)

    Feedback Contact needs updating Image needs updating Reference needed Missing content Broken link Other Additional Comments Cancel Submit Category: Experimental...

  9. Template:ListsForPlace | Open Energy Information

    Open Energy Info (EERE)

    Feedback Contact needs updating Image needs updating Reference needed Missing content Broken link Other Additional Comments Cancel Submit Category: Experimental...

  10. Property:Incentive/ContPlace | Open Energy Information

    Open Energy Info (EERE)

    - Commercial Solutions Program (Texas) + Austin, Texas + AEP Texas Central Company - ENERGY STAR New Home Program (Texas) + Austin, Texas + (previous 25) (next 25) Retrieved...

  11. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    operates a number of power stations including the largest coal fired power station in the world as well as the Koeberg nuclear power station Esmeralda Energy Company Esmeralda...

  12. Appropriate Use of USGS Volumetric "Heat in Place" Method and...

    Open Energy Info (EERE)

    capacity of a geothermal system. The methodology consists of combining probability density functions for uncertain estimates of the temperature, area, and thickness of a...

  13. A Reexamination of USGS Volumetric "Heat in Place" Method | Open...

    Open Energy Info (EERE)

    capacity of a geothermal system. The methodology consists of combining probability density functions for uncertain estimates of the temperature, area, thickness, and thermal...

  14. NASCAR Green Gets First Place in Daytona 500 | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    ... Memorandum of Understanding at the NASCAR Green Summit in Chicago, outlining ways to support the accelerated deployment of clean energy technologies that reduce greenhouse gas ...

  15. Preliminary systems design study assessment report. Volume 3, Process in-place/leave in-place concepts

    SciTech Connect (OSTI)

    Mayberry, J.L.; Feizollahi, F.; Del Signore, J.C.

    1991-09-01

    The System Design Study (SDS), part of the Waste Technology Development Department at the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex`s Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each concept.

  16. EIA-819 Monthly Oxygenate Report

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Report Released: March 12, 2009 Notice: The Petroleum Supply Monthly has incorporated ethanol production (formerly published in PSM Appendix D) into petroleum supply and ...

  17. Measuring Process Safety Management

    SciTech Connect (OSTI)

    Sweeney, J.C. (ARCO Chemical Co., Newtown Square, PA (United States))

    1992-04-01

    Many companies are developing and implementing Process Safety Management (PSM) systems. Various PSM models, including those by the Center for Chemical Process Safety (CCPS), the American Petroleum Institute (API), the Chemical Manufacturers Association (CMA) and OSHA have emerged to guide the design, development and installation of these systems. These models represent distillations of the practices, methods and procedures successfully used by those who believed that a strong correlation exists between sound PSM practices and achieving reductions in the frequency and severity of process incidents. This paper describes the progress of CCPS research toward developing a PSM performance measurement model. It also provides a vision for future CCPS research to define effectiveness indices.

  18. Designing a parallel simula machine

    SciTech Connect (OSTI)

    Papazoglou, M.P.; Georgiadis, P.I.; Maritsas, D.G.

    1983-10-01

    The parallel simula machine (PSM) architecture is based upon a master/slave topology, incorporating a master microprocessor. Interconnection circuitry between the master and slave processor modules uses a timesharing system bus and various programmable interrupt control units. Common and private memory modules reside in the PSM, and direct memory access transfers ease the master processor's workload. 5 references.

  19. An investigation of the accuracy and the characteristics of the Peak-Shaving Method applied to production cost calculations

    SciTech Connect (OSTI)

    Wu, R.N.; Lee, T.H.; Hill, E.F.

    1989-08-01

    The Peak-Shaving Method (PSM) has been applied in many well-known commercial software packages for hydrothermal scheduling to minimize the system production cost. These packages are frequently applied by government agencies and utilities for rate hearings, energy import/export licensing, generation capacity expansion planning, and hourly production scheduling for a weekly system operation planning, etc. The accuracy and the characteristics of the PSM however have not yet been carefully investigated. This work presents an extensive study of the PSM. A wide range of load factors and hydro ratio systems have been tested and compared with the results of the rigorous Coordination-Equation Method (CEM). It has been found that the PSM always scheduled more water in the high load period than the CEM. The PSM, therefore, is more likely to swing the hydro plants and may thus avoid frequent on/off operation of thermal units.

  20. Chemical process hazards analysis

    SciTech Connect (OSTI)

    1996-02-01

    The Office of Worker Health and Safety (EH-5) under the Assistant Secretary for the Environment, Safety and Health of the US Department (DOE) has published two handbooks for use by DOE contractors managing facilities and processes covered by the Occupational Safety and Health Administration (OSHA) Rule for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119), herein referred to as the PSM Rule. The PSM Rule contains an integrated set of chemical process safety management elements designed to prevent chemical releases that can lead to catastrophic fires, explosions, or toxic exposures. The purpose of the two handbooks, ``Process Safety Management for Highly Hazardous Chemicals`` and ``Chemical Process Hazards Analysis,`` is to facilitate implementation of the provisions of the PSM Rule within the DOE. The purpose of this handbook ``Chemical Process Hazards Analysis,`` is to facilitate, within the DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be considered a complete resource on PrHA methods. Likewise, to determine if a facility is covered by the PSM rule, the reader should refer to the handbook, ``Process Safety Management for Highly Hazardous Chemicals`` (DOE- HDBK-1101-96). Promulgation of the PSM Rule has heightened the awareness of chemical safety management issues within the DOE. This handbook is intended for use by DOE facilities and processes covered by the PSM rule to facilitate contractor implementation of the PrHA element of the PSM Rule. However, contractors whose facilities and processes not covered by the PSM Rule may also use this handbook as a basis for conducting process hazards analyses as part of their good management practices. This handbook explains the minimum requirements for PrHAs outlined in the PSM Rule. Nowhere have requirements been added beyond what is specifically required by the rule.

  1. Corrective Action Decision Document/Closure Report for Corrective Action Unit 374: Area 20 Schooner Unit Crater, Nevada National Security Site, Nevada with ROTC 1, Revision 0

    SciTech Connect (OSTI)

    Patrick Matthews

    2011-07-01

    Corrective Action Unit 374 comprises five corrective action sites (CASs): • 18-22-05, Drum • 18-22-06, Drums (20) • 18-22-08, Drum • 18-23-01, Danny Boy Contamination Area • 20-45-03, U-20u Crater (Schooner) The purpose of this Corrective Action Decision Document/Closure Report is to provide justification and documentation supporting the recommendation that no further corrective action is needed for CAU 374 based on the implementation of corrective actions. The corrective action of closure in place with administrative controls was implemented at CASs 18-23-01 and 20-45-03, and a corrective action of removing potential source material (PSM) was conducted at CAS 20-45-03. The other CASs require no further action; however, best management practices of removing PSM and drums at CAS 18-22-06, and removing drums at CAS 18-22-08 were performed. Corrective action investigation (CAI) activities were performed from May 4 through October 6, 2010, as set forth in the Corrective Action Investigation Plan for Corrective Action Unit 374: Area 20 Schooner Unit Crater, Nevada Test Site, Nevada. The approach for the CAI was divided into two facets: investigating the primary release of radionuclides and investigating other releases (migration in washes and chemical releases). The purpose of the CAI was to fulfill data needs as defined during the data quality objective (DQO) process. The CAU 374 dataset of investigation results was evaluated based on the data quality indicator parameters. This evaluation demonstrated the dataset is acceptable for use in fulfilling the DQO data needs. Analytes detected during the CAI were evaluated against final action levels (FALs) established in this document. Radiological doses exceeding the FAL of 25 millirem per year were found to be present in the surface soil that was sampled. It is assumed that radionuclide levels present in subsurface media within the craters and ejecta fields (default contamination boundaries) at the Danny Boy and

  2. Application of process safety management to the coke industry

    SciTech Connect (OSTI)

    Mentzer, W.P. (USX Corp., Clairton, PA (United States))

    1994-09-01

    OSHA's Process Safety Management (PSM) standard went into effect on May 26, 1992. Explosions at various industrial facilities that claimed the lives of workers over the past several years were the catalyst for the new federal regulations. The new PSM standard deals with 130 specific chemicals along with flammable liquids and gases used at nearly 25,000 worksites. The performance-based PSM standard consists of 14 elements that establish goals and describe basic program elements to fulfill these goals. The PSM standard requires employers to conduct a process hazard analysis to examine potential problems and determine what preventative measures should be taken. Key elements include employee training, written operating procedures, safety reviews and maintenance requirements to insure the mechanical integrity of critical components. The presentation will cover the evolution of OSHA's PSM standard, the requirements of the 14 elements in the PSM standard and discuss the significant achievements in the development and implementation of the PSM process at US Steel's Clairton coke plant.

  3. Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 114: Area 25 EMAD Facility Nevada Test Site, Nevada

    SciTech Connect (OSTI)

    Mark Krauss

    2010-06-01

    activities that will support the closure of CAU 114: • Perform site preparation activities (e.g., utilities clearances, radiological surveys). • Collect samples of materials to determine whether potential source material (PSM) is present that may cause the future release of a contaminant of concern to environmental media. • If no PSMs are present at the CAS, establish no further action as the corrective action. • If a PSM is present at the CAS, either: - Establish clean closure as the corrective action. The material to be remediated will be removed and disposed of as waste, or - Establish closure in place as the corrective action and implement the appropriate use restrictions. • Confirm the selected closure option is sufficient to protect human health and the environment.

  4. Solar Decathlon Design Places People and the Outdoors at its Heart |

    Energy Savers [EERE]

    Collaboration, Round 2 Now Open | Department of Energy Business Vouchers Pilot: 33 Businesses Selected for Lab Collaboration, Round 2 Now Open Small Business Vouchers Pilot: 33 Businesses Selected for Lab Collaboration, Round 2 Now Open March 16, 2016 - 11:05am Addthis Small Business Vouchers Pilot: 33 Businesses Selected for Lab Collaboration, Round 2 Now Open From left: Deputy Secretary of Energy Elizabeth Sherwood-Randall stands with Dan Koleske, from Sandia National Laboratories;

  5. ALMA OBSERVATIONS OF THE COLDEST PLACE IN THE UNIVERSE: THE BOOMERANG NEBULA

    SciTech Connect (OSTI)

    Sahai, R.; Vlemmings, W. H. T.; Huggins, P. J.; Nyman, L.-Å.; Gonidakis, I.

    2013-11-10

    The Boomerang Nebula is the coldest known object in the universe, and an extreme member of the class of pre-planetary nebulae, objects which represent a short-lived transitional phase between the asymptotic giant branch and planetary nebula evolutionary stages. Previous single-dish CO (J = 1-0) observations (with a 45'' beam) showed that the high-speed outflow in this object has cooled to a temperature significantly below the temperature of the cosmic background radiation. Here we report the first observations of the Boomerang Nebula with ALMA in the CO J = 2-1 and J = 1-0 lines to resolve the structure of this ultra-cold nebula. We find a central hourglass-shaped nebula surrounded by a patchy, but roughly round, cold high-velocity outflow. We compare the ALMA data with visible-light images obtained with the Hubble Space Telescope and confirm that the limb-brightened bipolar lobes seen in these data represent hollow cavities with dense walls of molecular gas and dust producing both the molecular-emission-line and scattered-light structures seen at millimeter and visible wavelengths. The large diffuse biconical shape of the nebula seen in the visible wavelength range is likely due to preferential illumination of the cold, high-velocity outflow. We find a compact source of millimeter-wave continuum in the nebular waist—these data, together with sensitive upper limits on the radio continuum using observations with ATCA, indicate the presence of a substantial mass of very large (millimeter-sized) grains in the waist of the nebula. Another unanticipated result is the detection of CO emission regions beyond the ultra-cold region which indicate the re-warming of the cold gas, most likely due to photoelectric grain heating.

  6. How High Up Is That Place? How Far In The Future Is That Event...

    Office of Scientific and Technical Information (OSTI)

    B. How high are those balloons? To begin our analogy, let's say you and your family have stopped at a restaurant. While you're there, you notice a couple of hot air balloons, one ...

  7. Builders place final beam in first phase of CMRR project at Los...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Austin Commercial Contractors LP of Dallas received the "design-build" contract. July 22, ... Austin Commercial Contractors LP of Dallas received the "design-build" contract in ...

  8. Technical assessment of TRUSAF for compliance with work place air sampling. Revision 1

    SciTech Connect (OSTI)

    Butler, J.D.

    1995-01-23

    The purpose of this Technical Work Document is to satisfy WHC-CM-1-6, the ``WHC Radiological Control Manual.`` This first revision of the original Supporting Document covers the period from January 1, 1994 to December 31, 1994. WHC-CM-1-6 is the primary guidance for radiological control at Westinghouse Hanford Company (WHC). As such, it complies with Title 10, Part 835 of the Code of Federal Regulations. In addition to WHC-CM-1-6, there is HSRCM-1, the ``Hanford Site Radiological Control Manual`` and several Department of Energy (DOE) Orders, national consensus standards, and reports that provide criteria, standards, and requirements for workplace air sampling programs. This document provides a summary of these, as they apply to WHC facility workplace air sampling programs. this document also provides an evaluation of the compliance of the TRUSAF workplace air sampling program to the criteria, standards, and requirements and documents. Where necessary, it also indicates changes needed to bring specific locations into compliance.

  9. The place of hard coal in energy supply pattern of Turkey

    SciTech Connect (OSTI)

    Yilmaz, A.O.; Aydiner, K.

    2009-07-01

    Lignite and hard coal are the major sources of domestic energy sources of Turkey. Hard coal is produced at only one district in the country. Zonguldak Hard Coal Basin is the major power for development of the Turkish steel-making industry. It is the only hard coal basin in the country and it has, to date, supplied approximately 400 million tons of run-of-mine hard coal. This article investigates the potential of hard coal as an energy source and discusses the measures to activate the region for the future energy supply objectives of the country.

  10. How High Up Is That Place? How Far In The Future Is That Event...

    Office of Scientific and Technical Information (OSTI)

    ... Incidentally, if you've ever wondered what uses there are for algebra and the Pythagorean theorem, this book shows one of them. "On the Electrodynamics of Moving Bodies" exit ...

  11. Memo to Reactivate a Directive Placed on Hold for DOE - DOE Directives,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Delegations, and Requirements DOE by Website Administrator application/vnd.openxmlformats-officedocument.wordprocessingml.document icon memo_to_reactivate_directive_on_hold_doe -5.docx - application/vnd.openxmlformats-officedocument.wordprocessingml.document, 15 KB (15629

  12. Memo to Reactivate a Directive Placed on Hold for NNSA - DOE Directives,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Delegations, and Requirements NNSA by Website Administrator Microsoft Word Document icon memo_to_reactivate_directive_on_hold_nnsa -5 (1).doc - Microsoft Word Document, 25 KB (26112

  13. How High Up Is That Place? How Far In The Future Is That Event? - C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    C. Whose phone rang first? Just as an ordinary picture can show how locations are related in space, Minkowski's diagrams show how events are related in both space and time. Below, on the left, we have our positional diagram showing the locations in space of the two balloons, as seen in your frame of reference at the restaurant. On the right, we have a Minkowski diagram of the two calls to your and your brother's mobile phones, as observed from your frame of reference in your vehicle. In the

  14. How High Up Is That Place? How Far In The Future Is That Event...

    Office of Scientific and Technical Information (OSTI)

    Electrons in this situation often move much faster. A typical speed for an electron emitted by a decaying copper-64 nucleus is 270,000 kilometers per second. If you had moved that ...

  15. Make the World a Better Place (Program Document) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    science in images, cartoons, photos, words and original paintings, but any ... Save to My Library Send to Email Send to Email Email address: Content: Close Send ...

  16. A Close in Place Option for Buried Transuranic Waste at the Nevada...

    National Nuclear Security Administration (NNSA)

    ... and senescence * Radioactive decay and ingrowth * Climate change * Changing soil moisture contents in response to climate change * Changing water potential gradients in ...

  17. Make the World a Better Place (Program Document) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Authors: Bryant, Steven L ; Camacho-Lopez, Tara R ; Tenney, Craig M ; Toon, Hongkyu ; Cygan, Randall T ; Altman, Susan J Publication Date: 2013-07-18 OSTI Identifier: 1119847 DOE ...

  18. Development of a Leave-in-Place Slab Edge Insulating Form System

    SciTech Connect (OSTI)

    Marc Hoeschele; Eric Lee

    2009-08-31

    Concrete slabs represent the primary foundation type in residential buildings in the fast-growing markets throughout the southern and southwestern United States. Nearly 75% of the 2005 U.S. population growth occurred in these southern tier states. Virtually all of these homes have uninsulated slab perimeters that transfer a small, but steady, flow of heat from conditioned space to outdoors during the heating season. It is estimated that new home foundations constructed each year add 0.016 quads annually to U.S. national energy consumption; we project that roughly one quarter of this amount can be attributed to heat loss through the slab edge and the remaining three quarters to deep ground transfers, depending upon climate. With rising concern over national energy use and the impact of greenhouse gas emissions, it is becoming increasingly imperative that all cost-effective efforts to improve building energy efficiency be implemented. Unlike other building envelope components that have experienced efficiency improvements over the years, slab edge heat loss has largely been overlooked. From our vantage point, a marketable slab edge insulation system would offer significant benefits to homeowners, builders, and the society as a whole. Conventional slab forming involves the process of digging foundation trenches and setting forms prior to the concrete pour. Conventional wood form boards (usually 2 x 10's) are supported by vertical stakes on the outer form board surface, and by supporting 'kickers' driven diagonally from the top of the form board into soil outside the trench. Typically, 2 x 10's can be used only twice before they become waste material, contributing to an additional 400 pounds of construction waste per house. Removal of the form boards and stakes also requires a follow-up trip to the jobsite by the concrete subcontractor and handling (storage/disposal) of the used boards. In the rare cases where the slab is insulated (typically custom homes with radiant floor heating), the most practical insulation strategy is to secure rigid foam insulation, such as Dow Styrofoam{trademark}, to the inside of the wooden slab edge forms. An alternative is to clad insulation to the perimeter of the slab after the slab has been poured and cured. In either case, the foam must have a 'termite strip' that prevents termites from creating hidden tunnels through or behind the foam on their way to the wall framing above. Frequently this termite strip is a piece of sheet metal that must be fabricated for each project. The above-grade portion of the insulation also needs to be coated for appearance and to prevent damage from construction and UV degradation. All these steps add time, complexity, and expense to the insulating process.

  19. Through Sandia DOE/ARM* is putting in place a UAS/UAV** hosting...

    Office of Scientific and Technical Information (OSTI)

    of Alaska Fairbanks: In Situ A 20 (Boeing Scan Eagle); 45,000 flight hours, mostly in Iraq; 20+ hour flight duration Sandia National Laboratories Long Range Plan * Segment R2204 ...

  20. State Oil and Gas Board State Oil and Gas Board Address Place...

    Open Energy Info (EERE)

    Suite Arizona http www azogcc az gov Arkansas Oil and Gas Commission Arkansas Oil and Gas Commission Natural Resources Dr Ste Arkansas http www aogc state ar us JDesignerPro...

  1. The changing role of market research as utilities shift focus from rate cases to market places

    SciTech Connect (OSTI)

    Meagher, P.

    1994-11-01

    Among investor-owned utilities, financial success has been largely based on success in regulatory proceedings. In the future, however, utility survival will depend much more on success in meeting customer needs in marketplaces. Competition, in its various forms, will likely intensify to the point where utilities will need to make sweeping changes in order to retain their most important customers and to profit from new product and service offerings. As had been discussed in a number of EPRI workshops and studies, utilities with an in-depth understanding of their customers - their needs, values, behavior, etc. - will have a much greater chance of thriving in this new environment. Since market research is an important window through which utilities view their customers, the role of the market researcher will likely become increasingly prominent in this more competitive world. The unbundling and rebundling of services and the development of non-traditional services will clearly complicate the market research efforts of the electric power industry.

  2. Greensburg, Kansas--A Better, Greener Place to Live | Open Energy...

    Open Energy Info (EERE)

    Other commercial and public buildings will be designed to LEED Platinum or Gold rating levels 100% renewable electricity 100% of the time Reduce GHG emissions by 36%...

  3. Six Places to Find Help with Your Energy Costs | Department of...

    Energy Savers [EERE]

    and Efficiency (DSIRE). Here you'll find a comprehensive listing of available rebates, loans, grants, and tax incentives for renewable energy technologies and energy...

  4. Putting Carbon in its Place: What You Can Do (LBNL Science at the Theater)

    ScienceCinema (OSTI)

    Walker, Iain; Regnier, Cindy [LBNL, Environmental Energy Technologies Division

    2011-04-28

    Science at the Theater: Berkeley Lab scientists reveal the latest research on how to reduce your carbon footprint at home, work, and when you shop. Learn how even small choices can have a big impact. Iain Walker's research focuses on optimizing the energy use and comfort of buildings. He's a staff scientist in the Energy Performance of Buildings Group, which is part of Berkeley Lab's Environmen...tal Energy Technologies Division. He's also executive editor of Home Energy Magazine. Cindy Regnier is a Project Manager in the Environmental Energy Technologies Division at Berkeley Lab. She has over 13 years of mechanical engineering design experience, with a focus on low-energy buildings. Her projects have included several LEED Platinum buildings and the design of a 200,000 sf carbon neutral, net-zero energy science museum in San Francisco. Eric Masanet is Acting Deputy Leader of the International Energy Studies Group at Berkeley Lab. His research focuses on life-cycle assessments and energy efficiency analysis. He holds a joint research appointment in the Institute of Transportation Studies at UC Berkeley.

  5. The Solid Waste Authority: {open_quotes}This place is for the birds{close_quotes}

    SciTech Connect (OSTI)

    Mihalik, M.B.

    1995-12-01

    The Solid Waste Authority of Palm Beach County (SWA) manages a waste-to-energy facility and landfill adjacent to a site which, during the 1985 Florida drought, served as the largest communal Snail Kite (Rostrhamus sociabilis plumbeus) roost documented in the United States. Listed as an endangered species, the Snail Kite initiated a Section 7 consulation process as a USCOAE Dredge & Fill permit was sought for construction in 1987. In response to environmental permit requirements, SWA developed and implemented a Wildlife Conservation & Management Program which evaluated the roost`s response to activities associated with site development. Specifically, a seven-year bird monitoring program was conducted on kite usage of this roost from 1987-1993. Impact assessment was expanded to include monitoring the mixed-species wading bird colony which inhabits the same roosting area. Monitoring at the community level serves as a better environmental indicator because Snail Kites are nomadic and respond to regional water level changes. This paper gives an overview of the environmental concerns and approach taken to monitor the roost, describes the different components of the bird monitoring program, and summarizes the findings of the 7-year data collection. An evaluation of the SWA project with regards to impacts on Snail Kite and wading bird usage of the area is also discussed.

  6. Cal/OSHA process safety standard update

    SciTech Connect (OSTI)

    Pourmehraban, I.

    1995-12-31

    Process Safety Management (PSM) regulation applies mainly to chemical and oil companies, plus other industries such as food processing, and paper production. It covers plants that deal with any of about 130 toxic chemicals in quantities above thresholds limits in Appendix A of PSM standard or flammable liquids and gases in quantities greater than 10,000 pounds. The State Consultation PSM teams (North and South) use a detailed audit checklist featuring above elements for audit of facilities requesting PSM assistance. The audit focuses on three generic activities: records, onsite conditions, and interviews. Records include written programs that outline the requirements and documentation of completion. Onsite conditions are implementation of activities specified in written programs. Interviews are for evaluation of transferred information to the workers that are already developed in written programs and training programs.

  7. Who's leading your process safety efforts

    SciTech Connect (OSTI)

    Bruce, S.R. (EQE International, San Francisco, CA (United States))

    1994-01-01

    To carry out a successful process safety management (PSM) program, management must complete three steps: Thoroughly understand the OSHA regulation and its benefits; Conduct a frank and complete review of current process conditions; and Communicate to all organizational levels the PSM goals. Management's leadership is the critical item to set up and maintain this safety-minded program. Instead of seeing PSM as a resource drain, operating companies should view if as a safety turnaround. This turnaround examines how and why operators continue to do business with hazardous chemicals. A better attitude toward safety repass tangible and intangible benefit such as improved profitability, employee morale and public image. A new or elaborate system isn't required, however, a new attitude is. Managers must be leaders to direct their organization toward their safety goals. This paper discusses how to implement a PSM program.

  8. DOE Approved Technical Standards | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be...

  9. MEMORANDUM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... MEMORANDUM 2 A package of HI and PSM information was provided to DOE staff that included the following: Attachments: A: Joint HIASAP letter to Roland Risser, dated April 30, 2012 ...

  10. DOE-HDBK-1101-96

    Broader source: Energy.gov [DOE]

    Process Safety Management for Highly Hazardous Chemicals Replaced by DOE-HDBK-1101-2004 This handbook provides information necessary to determine if a chemical process is covered by the PSM Rule and provides an interpretation of the 14 elements of the PSM Rule. An overview of these elements is given in Table 1.1. This handbook also describes DOE programs that may, with or without modification, satisfy the requirements of this Rule.

  11. Overview of Pump Systems Matter | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Overview of Pump Systems Matter Overview of Pump Systems Matter Pump Systems Matter (PSM) is a non-profit (501(c) 3) educational foundation, established to educate the marketplace and promote pumping systems energy efficiency. G_Overview_of_Pump_Systems_Matter.pdf (1.04 MB) More Documents & Publications Summary of 2011 Accomplishments HI & PSM Course Overview Pump Systems Matter Optimization Pump Systems Matter Mission and Vision

  12. Coma measurement by use of an alternating phase-shifting mask mark with a specific phase width

    SciTech Connect (OSTI)

    Qiu Zicheng; Wang Xiangzhao; Yuan Qiongyan; Wang Fan

    2009-01-10

    The correlation between the coma sensitivity of the alternating phase-shifting mask (Alt-PSM) mark and the mark's structure is studied based on the Hopkins theory of partially coherent imaging and positive resist optical lithography (PROLITH) simulation. It is found that an optimized Alt-PSM mark with its phase width being two-thirds its pitch has a higher sensitivity to coma than Alt-PSM marks with the same pitch and the different phase widths. The pitch of the Alt-PSM mark is also optimized by PROLITH simulation, and the structure of p=1.92{lambda}/NA and pw=2p/3 proves to be with the highest sensitivity. The optimized Alt-PSM mark is used as a measurement mark to retrieve coma aberration from the projection optics in lithographic tools. In comparison with an ordinary Alt-PSM mark with its phase width being a half its pitch, the measurement accuracies of Z7 and Z14 apparently increase.

  13. Corrective Action Decision Document/Closure Report for Corrective Action Unit 561: Waste Disposal Areas, Nevada National Security Site, Nevada, Revision 0

    SciTech Connect (OSTI)

    Mark Krauss

    2011-08-01

    counterweights were also removed, and the soil below these items does not contain contamination that exceeds the FAL for lead. (4) The concrete-like material at CAS 25-08-02 contains arsenic above the FAL of 23 mg/kg. This concrete-like material was removed, and the soil that remains at this CAS does not contain contamination exceeding the FALs. Lead-acid batteries were also removed, and the soil below the batteries does not contain contamination that exceeds the FAL for lead. (5) The surface soils within the main waste dump at the posted southern radioactive material area (RMA) at CAS 25-23-21 contain cesium (Cs)-137 and PCBs above the FALs of 72.9 picocuries per gram (pCi/g) and 0.74 mg/kg, respectively. The soil was removed from the RMA, and the soil that remains at this CAS does not contain contamination exceeding the FALs. (6) The surface and subsurface soils at CAS 25-25-19 do not contain contamination exceeding the FALs. In addition, lead bricks were removed, and the soil below these items does not contain contamination that exceeds the FAL for lead. The following best management practices were implemented: (1) Housekeeping debris at CASs 02-08-02, 23-21-04, 25-08-02, 25-23-21, and 25-25-19 was removed and disposed of; (2) The open trenches at CAS 23-21-04 were backfilled; (3) The waste piles at CAS 25-08-02 were removed and the area leveled to ground surface; and (4) The remaining waste piles at the main waste dump at CAS 25-23-21 were leveled to ground surface. Therefore, NNSA/NSO provides the following recommendations: (1) No further action for CASs 01-19-01, 03-19-02, 05-62-01, 12-23-09, and 22-19-06; (2) Closure in place with an FFACO use restriction (UR) at CAS 02-08-02 for the remaining PAH-, arsenic-, and lead-contaminated soil, and the melted lead PSM. The UR form and map have been filed in the NNSA/NSO Facility Information Management System, the FFACO database, and the NNSA/NSO CAU/CAS files; (3) No further corrective action at CAS 23-21-04, as the lead bricks

  14. DOE Announces Webinars on Building Energy Optimization Tool Training, Placing Utility Energy Service Contract Task Orders, and More

    Broader source: Energy.gov [DOE]

    EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies to training for the clean energy workforce. View this week's webinars.

  15. Utilize Cementitious High Carbon Fly Ash (CHCFA) to Stabilize Cold In-Place Recycled (CIR) Asphalt Pavement as Base Coarse

    SciTech Connect (OSTI)

    Wen, Haifang; Li, Xiaojun; Edil, Tuncer; O'Donnell, Jonathan; Danda, Swapna

    2011-02-05

    The purpose of this study was to evaluate the performance of cementitious high carbon fly ash (CHCFA) stabilized recycled asphalt pavement as a base course material in a real world setting. Three test road cells were built at MnROAD facility in Minnesota. These cells have the same asphalt surface layers, subbases, and subgrades, but three different base courses: conventional crushed aggregates, untreated recycled pavement materials (RPM), and CHCFA stabilized RPM materials. During and after the construction of the three cells, laboratory and field tests were carried out to characterize the material properties. The test results were used in the mechanistic-empirical pavement design guide (MEPDG) to predict the pavement performance. Based on the performance prediction, the life cycle analyses of cost, energy consumption, and greenhouse gasses were performed. The leaching impacts of these three types of base materials were compared. The laboratory and field tests showed that fly ash stabilized RPM had higher modulus than crushed aggregate and RPM did. Based on the MEPDG performance prediction, the service life of the Cell 79 containing fly ash stabilized RPM, is 23.5 years, which is about twice the service life (11 years) of the Cell 77 with RPM base, and about three times the service life (7.5 years) of the Cell 78 with crushed aggregate base. The life cycle analysis indicated that the usage of the fly ash stabilized RPM as the base of the flexible pavement can significantly reduce the life cycle cost, the energy consumption, the greenhouse gases emission. Concentrations of many trace elements, particularly those with relatively low water quality standards, diminish over time as water flows through the pavement profile. For many elements, concentrations below US water drinking water quality standards are attained at the bottom of the pavement profile within 2-4 pore volumes of flow.

  16. National Register of Historic Places multiple property documentation form -- Historic, archaeological, and traditional cultural properties of the Hanford Site, Washington

    SciTech Connect (OSTI)

    Nickens, P.R.

    1997-08-01

    The US Department of Energy`s Hanford Site encompasses an area of 560 square miles on the Columbia River in southeastern Washington. Since 1943, the Hanford Site has existed as a protected area for activities primarily related to the production of radioactive materials for national defense uses. For cultural resources on the Hanford Site, establishment of the nuclear reservation as a high security area, with public access restricted, has resulted in a well-protected status, although no deliberate resource protection measures were in effect to mitigate effects of facilities construction and associated activities. Thus, the Hanford Site contains an extensive record of aboriginal archaeological sites and Native American cultural properties, along with pre-Hanford Euro-American sites (primarily archaeological in nature with the removal of most pre-1943 structures), and a considerable number of Manhattan Project/Cold War era buildings and structures. The recent mission change from production to clean up and disposal of DOE lands created a critical need for development and implementation of new and different cultural resource management strategies. DOE-RL has undertaken a preservation planning effort for the Hanford Site. The intent of this Plan is to enable DOE-RL to organize data and develop goals, objectives, and priorities for the identification, evaluation, registration, protection, preservation, and enhancement of the Site`s historical and cultural properties. Decisions made about the identification, evaluation, registration and treatment of historic properties are most aptly made when relationships between individual properties and other similar properties are considered. The historic context and the multiple property documentation (NTD) process provides DOE-RL the organizational framework for these decisions. Once significant patterns are identified, contexts developed, and expected properties are defined, the NTD process provides the foundation for future decisions concerning the management of significant cultural resources on the Hanford Site.

  17. To request the approval of a new Staffing and Placing Order under DOE O 325.3

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-11-05

    To create a new Staffing and Placement order that will establish policies and other requirements relating to internal and external staffing and recruitment practices.

  18. Ion generation and CPC detection efficiency studies in sub 3-nm size range

    SciTech Connect (OSTI)

    Kangasluoma, J.; Junninen, H.; Sipilae, M.; Kulmala, M.; Petaejae, T.; Lehtipalo, K.; Mikkilae, J.; Vanhanen, J.; Attoui, M.; Worsnop, D.

    2013-05-24

    We studied the chemical composition of commonly used condensation particle counter calibration ions with a mass spectrometer and found that in our calibration setup the negatively charged ammonium sulphate, sodium chloride and tungsten oxide are the least contaminated whereas silver on both positive and negative and the three mentioned earlier in positive mode are contaminated with organics. We report cut-off diameters for Airmodus Particle Size Magnifier (PSM) 1.1, 1.3, 1.4, 1.6 and 1.6-1.8 nm for negative sodium chloride, ammonium sulphate, tungsten oxide, silver and positive organics, respectively. To study the effect of sample relative humidity on detection efficiency of the PSM we used different humidities in the differential mobility analyzer sheath flow and found that with increasing relative humidity also the detection efficiency of the PSM increases.

  19. Experiments in sideband suppression on the Los Alamos National Laboratory Free-Electron Laser

    SciTech Connect (OSTI)

    White, C.J.; Coyle, M.R.; Paxton, A.H. (Mission Research Corp., Albuquerque, NM (United States). Laser and Optical R and D Group); O'Shea, P.G.; Bender, S.C.; Byrd, D.A.; Feldman, D.W.; Goldstein, J.C.: Pitcher, E.J.; Zaugg, T.J. (Los Alamos National Lab., NM (United States))

    1993-01-01

    Two versions of the Phase-Step Mirror'' (PSM), a novel optical component that prevents the formation of sidebands in a Free-Electron Laser (FEL) were tested on the Los Alamos National Laboratory (LANL) APEX FEL. Sideband suppression and frequency control with high extraction efficiency and single line, transform limited operation were demonstrated. The results of our LANL experiments and computer simulations showed that for very high gain applications, the first-order sideband is completely suppressed, but the laser gain is so strong that on about pass 300 the sideband at the second-order or next free spectral range of the PSM appears. This second-order sideband may be suppressed by designing a PSM with grooves having two alternating depths, one chosen to suppress the first-order sideband, and the other, the second-order sideband.

  20. OSHA`s process safety management standard

    SciTech Connect (OSTI)

    Morelli, J.A.

    1994-12-31

    On February 24, 1992, OSHA published the final rule for its Process Safety Management Standard (PSM) mandated by the Clean Air Act Amendments of 1990. (see Federal Register 57 FR 6356-6417). This standard imposes several responsibilities upon employers whose processes can cause large accident releases that could result in processes can cause large accident releases that could result in catastrophes. In contrast to OSHA`s Hazard Communication standard which focuses on routine daily exposures to hazardous materials, the PSM Standard is concerned with processes whereby the use, storage, manufacturing, handling or on-site movement of highly hazardous chemicals which exceed threshold quantities, provides potential for a catastrophic release. The PSM Standard requires: a written program, plans, training, hazard analysis and compliance auditing. This paper outlines the provisions under this Standard pursuant to OSHA regulation 29 Code of Federal Regulation 1910.119.

  1. Mechanical integrity implementation and related process safety management elements

    SciTech Connect (OSTI)

    Hudson, K.M. [General Physics Corp., San Diego, CA (United States)

    1995-12-31

    The OSHA Process Safety Management (PSM) rule requires covered facilities to establish a mechanical integrity (MI) program. The MI program must address an ongoing effort to maintain the integrity of process equipment and safety systems by providing written procedures, training, inspection and testing, and quality assurance. Development of an MI program requires information from other PSM elements such as equipment process safety information and employee participation as building blocks for the program. Information obtained from other elements of PSM can be used as the basis for inspection and testing, frequency of testing, written maintenance procedures, training of maintenance personnel, and quality assurance of spare parts and newly installed equipment. This paper presents highlights in the implementation of a mechanical integrity program. A description of the use of process safety information and baseline inspections is detailed with appropriate examples. The MI program stems from an initial documentation review, and culminates in a completely functional MI program in compliance with the regulation.

  2. Experiments in sideband suppression on the Los Alamos National Laboratory Free-Electron Laser

    SciTech Connect (OSTI)

    White, C.J.; Coyle, M.R.; Paxton, A.H. [Mission Research Corp., Albuquerque, NM (United States). Laser and Optical R and D Group; O`Shea, P.G.; Bender, S.C.; Byrd, D.A.; Feldman, D.W.; Goldstein, J.C.: Pitcher, E.J.; Zaugg, T.J. [Los Alamos National Lab., NM (United States)

    1993-06-01

    Two versions of the ``Phase-Step Mirror`` (PSM), a novel optical component that prevents the formation of sidebands in a Free-Electron Laser (FEL) were tested on the Los Alamos National Laboratory (LANL) APEX FEL. Sideband suppression and frequency control with high extraction efficiency and single line, transform limited operation were demonstrated. The results of our LANL experiments and computer simulations showed that for very high gain applications, the first-order sideband is completely suppressed, but the laser gain is so strong that on about pass 300 the sideband at the second-order or next free spectral range of the PSM appears. This second-order sideband may be suppressed by designing a PSM with grooves having two alternating depths, one chosen to suppress the first-order sideband, and the other, the second-order sideband.

  3. The OSHA and EPA programs on preventing chemical accidents and potential applications in the photovoltaic industry

    SciTech Connect (OSTI)

    Fthenakis, V.M.

    1996-08-01

    OSHA issued in 1992, the Process Safety Management (PSM) of Highly Hazardous Substances. This rule requires owners/operators of facilities that handle hazardous chemicals in quantities greater than the listed thresholds to establish all the elements of a PSM. EPA has issued in June 1996, the rules for a Risk Management Program which also refers to specific substances and threshold quantities. These rules are applicable to all the facilities that use or store any of 139 regulated substances at quantities ranging from 100 lb to 10,000 lb. The RMP rule covers off-site hazards, while the OSHA Process Safety Management (PSM) rule covers worker safety issues within the plant boundary. Some of the listed substances may be found in photovoltaic manufacturing facilities. This brief report presents the basic elements of these two rules and discusses their potential applicability in the photovoltaic industry.

  4. Example process hazard analysis of a Department of Energy water chlorination process

    SciTech Connect (OSTI)

    Not Available

    1993-09-01

    On February 24, 1992, the Occupational Safety and Health Administration (OSHA) released a revised version of Section 29 Code of Federal Regulations CFR Part 1910 that added Section 1910.119, entitled ``Process Safety Management of Highly Hazardous Chemicals`` (the PSM Rule). Because US Department of Energy (DOE) Orders 5480.4 and 5483.1A prescribe OSHA 29 CFR 1910 as a standard in DOE, the PSM Rule is mandatory in the DOE complex. A major element in the PSM Rule is the process hazard analysis (PrHA), which is required for all chemical processes covered by the PSM Rule. The PrHA element of the PSM Rule requires the selection and application of appropriate hazard analysis methods to systematically identify hazards and potential accident scenarios associated with processes involving highly hazardous chemicals (HHCs). The analysis in this report is an example PrHA performed to meet the requirements of the PSM Rule. The PrHA method used in this example is the hazard and operability (HAZOP) study, and the process studied is the new Hanford 300-Area Water Treatment Facility chlorination process, which is currently in the design stage. The HAZOP study was conducted on May 18--21, 1993, by a team from the Westinghouse Hanford Company (WHC), Battelle-Columbus, the DOE, and Pacific Northwest Laboratory (PNL). The chlorination process was chosen as the example process because it is common to many DOE sites, and because quantities of chlorine at those sites generally exceed the OSHA threshold quantities (TQs).

  5. Petroleum supply monthly, April 1998, with data for February 1998

    SciTech Connect (OSTI)

    1998-04-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and District of Columbia), 5 PAD Districts and 12 Refining Districts. 16 figs., 56 tabs.

  6. Streamlined Approach for (SAFER) Plan for Corrective Action Unit 566: E-MAD Compound, Nevada Test Site, Nevada, Revision 0

    SciTech Connect (OSTI)

    Mark Krauss

    2010-06-01

    support the closure of CAU 566: • Perform site preparation activities (e.g., utilities clearances, radiological surveys). • Collect environmental samples from designated target populations (e.g., stained soil) to confirm or disprove the presence of contaminants of concern (COCs) as necessary to supplement existing information. • Collect samples of materials to determine whether potential source material (PSM) is present that may cause the future release of a COC to environmental media. • If no COCs or PSMs are present at a CAS, establish no further action as the corrective action. • If COCs exist, collect environmental samples from designated target populations (e.g., clean soil adjacent to contaminated soil) and submit for laboratory analyses to define the extent of COC contamination. • If a COC or PSM is present at a CAS, either: - Establish clean closure as the corrective action. The material to be remediated will be removed, disposed of as waste, and verification samples will be collected from remaining soil, or - Establish closure in place as the corrective action and implement the appropriate use restrictions. • Confirm the selected closure option is sufficient to protect human health and the environment.

  7. Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 114: Area 25 EMAD Facility Nevada Test Site, Nevada, Revision 0

    SciTech Connect (OSTI)

    Mark Burmeister

    2009-08-01

    needed to determine and implement appropriate corrective actions for each CAS in CAU 114. The following text summarizes the SAFER activities that will support the closure of CAU 114: • Perform site preparation activities (e.g., utilities clearances, radiological surveys). • Collect environmental samples from designated target populations (e.g., stained soil) to confirm or disprove the presence of contaminants of concern (COCs) as necessary to supplement existing information. • Collect samples of materials to determine whether potential source material (PSM) is present that may cause the future release of a COC to environmental media. • If no COCs or PSMs are present at a CAS, establish no further action as the corrective action. • If COCs exist, collect environmental samples from designated target populations (e.g., clean soil adjacent to contaminated soil) and submit for laboratory analyses to define the extent of COC contamination. • If a COC or PSM is present at a CAS, either: - Establish clean closure as the corrective action. The material to be remediated will be removed, disposed of as waste, and verification samples will be collected from remaining soil, or - Establish closure in place as the corrective action and implement the appropriate use restrictions. • Confirm the selected closure option is sufficient to protect human health and the environment.

  8. Corrective Action Decision Document/Closure Report for Corrective Action Unit 375: Area 30 Buggy Unit Craters, Nevada National Security Site, Nevada, Revision 0

    SciTech Connect (OSTI)

    Patrick Matthews

    2011-08-01

    Corrective Action Unit 375 comprises three corrective action sites (CASs): (1) 25-23-22, Contaminated Soils Site; (2) 25-34-06, Test Cell A Bunker; and (3) 30-45-01, U-30a, b, c, d, e Craters. The purpose of this CADD/CR is to provide justification and documentation supporting the recommendation that no further corrective action is needed for CAU 375 based on the implementation of corrective action of closure in place with administrative controls at CAS 25-23-22, no further action at CAS 25-34-06, and closure in place with administrative controls and removal of potential source material (PSM) at CAS 30-45-01. Corrective action investigation (CAI) activities were performed from July 28, 2010, through April 4, 2011, as set forth in the Corrective Action Investigation Plan for Corrective Action Unit 375: Area 30 Buggy Unit Craters. The approach for the CAI was divided into two facets: investigation of the primary release of radionuclides, and investigation of other releases (migration in washes and chemical releases). The purpose of the CAI was to fulfill data needs as defined during the data quality objective (DQO) process. The CAU 375 dataset of investigation results was evaluated based on the data quality assessment. This assessment demonstrated the dataset is acceptable for use in fulfilling the DQO data needs. Investigation results were evaluated against final action levels (FALs) established in this document. A radiological dose FAL of 25 millirem per year was established based on the Remote Work Area exposure scenario (336 hours of annual exposure). Radiological doses exceeding the FAL were assumed to be present within the default contamination boundaries at CASs 25-23-22 and 30-45-01. No contaminants were identified at CAS 25-34-06, and no corrective action is necessary. Potential source material in the form of lead plate, lead-acid batteries, and oil within an abandoned transformer were identified at CAS 30-45-01, and corrective actions were undertaken that

  9. DOE-HDBK-1100-2004

    Broader source: Energy.gov [DOE]

    Chemical Process Hazards Analysis Superseding DOE-HDBK-1100-96 (February 1996) The purpose of this handbook is to facilitate, within the DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be considered a complete resource on PrHA methods. Likewise, to determine if a facility is covered by the PSM rule, the reader should refer to the handbook, ""Process Safety Management for Highly Hazardous Chemicals"" (DOE-HDBK-1101-2004).

  10. DOE-HDBK-1101-2004

    Broader source: Energy.gov [DOE]

    Process Safety Management for Highly Hazardous Chemicals Superseding DOE-HDBK-1101-96 (February 1996) This handbook provides information necessary to determine if a chemical process is covered by the PSM Rule and provides an interpretation of the 14 elements of the PSM Rule. An overview of these elements is given in Table 1.1. This handbook also describes DOE programs that may, with or without modification, satisfy the requirements of this Rule. Questions and answers, based on OSHA's responses to questions from industry and labor, are provided at the end of most sections.

  11. Closure Report for Corrective Action Unit 117: Area 26 Pluto Disassembly Facility, Nevada Test Site, Nevada, Revision 0

    SciTech Connect (OSTI)

    Mark Burmeister

    2009-06-01

    radium-226. A corrective action was implemented to remove approximately 50 cubic yards of PCB-contaminated soil, approximately 1 cubic foot of radium-226 contaminated soil (and scabbled asphalt), and a high-efficiency particulate air filter that was determined to meet the criteria of a potential source material (PSM). Electrical and lighting components (i.e., PCB-containing ballasts and capacitors) and other materials (e.g., mercury-containing thermostats and switches, lead plugs and bricks) assumed to be PSM were also removed from Building 2201, as practical, without the need for sampling. Because the COC contamination and PSMs have been removed, clean closure of CAS 26-41-01 is recommended, and no use restrictions are required to be placed on this CAU. No further action is necessary because no other contaminants of potential concern were found above preliminary action levels. The physical end state for Building 2201 is expected to be eventual demolition to slab. The DOE, National Nuclear Security Administration Nevada Site Office provides the following recommendations: • Clean closure is the recommended corrective action for CAS 26-41-01 in CAU 117. • A Notice of Completion to the DOE, National Nuclear Security Administration Nevada Site Office is requested from the Nevada Division of Environmental Protection for closure of CAU 117. • Corrective Action Unit 117 should be moved from Appendix III to Appendix IV of the Federal Facility Agreement and Consent Order.

  12. Closure Report for Corrective Action Unit 539: Areas 25 and 26 Railroad Tracks Nevada National Security Site, Nevada with ROTC-1, Revision 0

    SciTech Connect (OSTI)

    Mark Kauss

    2011-06-01

    , 2010, through May 2, 2011, closure activities were performed as set forth in the Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 539: Areas 25 and 26 Railroad Tracks, Nevada Test Site, Nevada. The purposes of the activities as defined during the data quality objectives process were as follows: • Determine whether contaminants of concern (COCs) are present. • If COCs are present, determine their nature and extent, implement appropriate corrective actions, and properly dispose of wastes. Analytes detected during the closure activities were evaluated against final action levels (FALs) to determine COCs for CAU 539. Assessment of the data generated from closure activities revealed the following: • At CAS 26-99-05, the total effective dose for radiological releases did not exceed the FAL of 25 millirem per Industrial Area year. Potential source material in the form of lead bricks was found at three locations. A corrective action of clean closure was implemented at these locations, and verification samples indicated that no further action is necessary. • At CAS 25-99-21, the total effective dose for radiological releases exceeds the FAL of 25 millirem per Industrial Area year. Potential source material in the form of lead bricks was found at eight locations. A corrective action was implemented by removing the lead bricks and soil above FALs at these locations, and verification samples indicated that no further action is necessary. Pieces of debris with high radioactivity were identified as PSM and remain within the CAS boundary. A corrective action of closure in place with a UR was implemented at this CAS because closure activities showed evidence of remaining soil contamination and radioactive PSM. Future land use will be restricted from surface and intrusive activities. Closure activities generated waste streams consisting of industrial solid waste, recyclable materials, low-level radioactive waste, and mixed low

  13. Corrective Action Decision Document/Closure Report for Corrective Action Unit 560: Septic Systems, Nevada Test Site, Nevada, Revision 0

    SciTech Connect (OSTI)

    Grant Evenson

    2010-04-01

    leach pit chamber and leach rock. The contamination present at CAS 06-05-03 within the leach pit was not feasible to remove. •The surface and subsurface soils within and surrounding the septic system at CAS 06-05-04 contained PCB concentrations above the FAL of 0.74 mg/kg. The lateral and vertical extent of COCs was determined for this CAS. Contaminated soils were removed up to within 18 ft of the building. The remaining contamination is confined to subsurface soils adjacent to and beneath Building CP-162 and was not feasible to remove. •The solid materials within the septic tank and soils immediately surrounding the inlet end of the tank at CAS 06-59-03 contained benzo(a)pyrene above the FAL of 0.21 mg/kg. The soils, tank contents, and tank were removed. Materials remaining at this CAS do not contain contamination exceeding FALs. •The solids contained within the septic tank and inlet pipe at CAS 06-59-05 contained the following contaminants above their respective FALs: PCBs, arsenic, lead, benzo(a)pyrene, and pesticides. The tank and inlet pipe contents were removed. Materials remaining at this CAS do not contain contamination exceeding FALs. Therefore, the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) provides the following corrective action recommendations: •No further action for CASs 03-51-01, 06-04-02, and 06-59-04, as no contaminants of potential concern were present that exceed FALs. •Closure in place for CAS 06-05-03 under a corrective action with a use restriction (UR) for remaining PCB- and arsenic-impacted potential source material (PSM). The UR form and map have been filed in the NNSA/NSO Facility Information Management System, the FFACO database, and NNSA/NSO CAU/CAS files. •Closure in place for CAS 06-05-04 under a corrective action with a UR for remaining PCBs in soil adjacent to and beneath Building CP-162. The UR form and map have been filed in the NNSA/NSO Facility Information Management

  14. Petroleum supply monthly, May 1996 with data from March 1996

    SciTech Connect (OSTI)

    1996-05-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  15. Plasmids containing the gene for DNA polymerase I from Streptococcus pneumoniae

    DOE Patents [OSTI]

    Lacks, S.A.; Martinez, S.; Lopez, P.; Espinosa, M.

    1991-03-26

    A method is disclosed for cloning the gene which encodes a DNA polymerase-exonuclease of Streptococcus pneumoniae. Plasmid pSM22, the vector containing the pneumocccal polA gene, facilitates the expression of 50-fold greater amounts of the PolI enzyme. 1 figure.

  16. Plasmids containing the gene for DNA polymerase I from Streptococcus pneumoniae

    DOE Patents [OSTI]

    Lacks, S.A.; Martinez, S.; Lopez, P.; Espinosa, M.

    1987-08-28

    A method is disclosed for cloning the gene which encodes a DNA polymerase-exonuclease of /und Streptococcus/ /und pneumoniae/. Plasmid pSM22, the vector containing the pneumococcal polA gene, facilitates the expression of 50-fold greater amounts of the PolI enzyme. 1 fig., 1 tab.

  17. Plasimids containing the gene for DNA polymerase I from Streptococcus pneumoniae

    DOE Patents [OSTI]

    Lacks, Sanford A.; Martinez, Susana; Lopez, Paloma; Espinosa, Manuel

    1991-01-01

    A method is disclosed for cloning the gene which encodes a DNA polymerase-exonuclease of Streptococcus pneumoniae. Plasmid pSM22, the vector containing the pneumocccal polA gene, facilitates the expression of 50-fold greater amounts of the PolI enzyme.

  18. Petroleum supply monthly, April 1999, with data for February 1999

    SciTech Connect (OSTI)

    1999-04-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

  19. Siting analyses for existing facilities

    SciTech Connect (OSTI)

    Ford, K.; Mannan, M. [RMT/Jones and Neuse, Inc., Austin, TX (United States)

    1996-08-01

    The term {open_quotes}facility siting{close_quotes} refers to the spacial relationships between process units, process equipment within units, and the location of buildings relative to process equipment. Facility siting is an important consideration for the safe operation of manufacturing facilities. Paragraph (d) of the Process Safety Management (PSM) rule (29 CFR 1910.119) requires employers to document the codes and standards used for designing process equipment. This documentation includes facility siting. The regulation also requires employers to document that the design of the facility complies with recognized and generally accepted good engineering practices. In addition, paragraph (e) of the PSM regulation requires that facility siting be evaluated during Process Hazard Analyses. Facility siting issues may also need to be considered in emergency planning and response which are required under paragraph (n) of the PSM rule. This paper will demonstrate, by utilizing an example, one technique for evaluating whether buildings could be affected by a catastrophic incident and for determining if these buildings should be included in the PSM programs developed at the facility such as Process Hazard Analysis and Mechanical Integrity. In addition, this example will illustrate a methodology for determining if the buildings are designed and located in accordance with good engineering practice and industry standards.

  20. Synthesis of monodispersed CdSe nanocrystals in poly(styrene-alt-maleic anhydride) at room temperature

    SciTech Connect (OSTI)

    Liu, S.H.; Qian, X.F.; Yuan, J.Y.; Yin, J.; He, R.; Zhu, Z.K

    2003-07-14

    Nanocomposite of CdSe/poly(styrene-alt-maleic anhydride) (PSM) was successfully prepared via an in situ reaction process at room temperature and ambient pressure. Transmission electron microscopy (TEM) analysis revealed that CdSe nanoparticles with a small size and narrow size distribution were obtained. The obtained nanocomposite was also characterized by FT-IR, XRD, ultraviolet-visible, and fluorescence spectroscopy.

  1. A review of the accidental release analysis procedure for the Clean Air Act Section 112(r)

    SciTech Connect (OSTI)

    Sung, H.M.; Liles, R. [Trinity Consultants, Inc., Dallas, TX (United States)

    1995-12-31

    As a result of the 1990 Clean Air Act Amendment, the US Environmental Protection Agency (EPA) is in the process of developing a chemical accident prevention program, which is covered under Section 112(r)(7). The EPA finalized the threshold quantities for the compounds listed in the 112(r)(7)(A) in January 1994. The proposed risk management program (RMP), 112(r)(7)(B), received over 1,000 comments from industries and the general public. The RMP rule proposed by the EPA is fundamentally based on the Process Safety Management (PSM) standard implemented by the Occupational Safety Health Administration (OSHA). The PSM was promulgated in May 1992. Many of the facilities subject to the OSHA PSM standard have developed certain programs to comply with the rule. The major difference between the EPA RMP and the OSHA PSM is the off-site hazard risk assessment (consequence analysis) required by EPA. As a result of this additional requirement, most of the comments received by the EPA for the proposed RMP rule concern the worst case release scenario defined for the hazard risk assessment, which may have a significant impact on the operations and future planning for all the facilities subject to this rule. This paper reviews major concerns involved in the consequence analysis of accidental releases. Several well-established models are reviewed in terms of their applicability for different release scenarios.

  2. Petroleum supply monthly, June 1997 with data for April 1997

    SciTech Connect (OSTI)

    NONE

    1997-06-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  3. Chemical process safety management within the Department of Energy

    SciTech Connect (OSTI)

    Piatt, J.A.

    1995-07-01

    Although the Department of Energy (DOE) is not well known for its chemical processing activities, the DOE does have a variety of chemical processes covered under OSHA`s Rule for Process Safety Management of Highly Hazardous Chemicals (the PSM Standard). DOE, like industry, is obligated to comply with the PSM Standard. The shift in the mission of DOE away from defense programs toward environmental restoration and waste management has affected these newly forming process safety management programs within DOE. This paper describes the progress made in implementing effective process safety management programs required by the PSM Standard and discusses some of the trends that have supported efforts to reduce chemical process risks within the DOE. In June of 1994, a survey of chemicals exceeding OSHA PSM or EPA Risk Management Program threshold quantities (TQs) at DOE sites found that there were 22 processes that utilized toxic or reactive chemicals over TQs; there were 13 processes involving flammable gases and liquids over TQs; and explosives manufacturing occurred at 4 sites. Examination of the survey results showed that 12 of the 22 processes involving toxic chemicals involved the use of chlorine for water treatment systems. The processes involving flammable gases and liquids were located at the Strategic Petroleum Reserve and Naval petroleum Reserve sites.

  4. Using compliance audits as the basis for developing an effective mechanical integrity program

    SciTech Connect (OSTI)

    Kiihne, E.J.; Mannan, M. [RMT/Jones and Neuse, Inc., Austin, TX (United States)

    1996-08-01

    The OSHA Process Safety Management (PSM) rule requires all covered facilities to conduct a compliance audit every three years. In addition, all the audit findings must be resolved within a reasonable time period. The process industry as a whole is lagging behind in compliance with mechanical integrity program requirements as demonstrated by the high number of OSHA citations issued to-date on mechanical integrity-related issues. This paper analyzes the findings of several PSM compliance audits and develops recommendations for developing effective mechanical integrity programs. The six explicit requirements of mechanical integrity, i.e. covered equipment, written procedures, training, inspection and testing, equipment deficiencies, and quality assurance are analyzed in the following manner: Number of OSHA citations in mechanical integrity and the distribution of these citations between the six specific requirements. Comparison of the OSHA citations with the audit findings from PSM compliance audits conducted by the authors. Using the conclusions from the OSHA citations and PSM compliance audits as a basis for developing effective mechanical integrity programs.

  5. Petroleum supply monthly, September 1997 with data for July 1997

    SciTech Connect (OSTI)

    NONE

    1997-09-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  6. Petroleum supply monthly, February 1995, with data for December 1994

    SciTech Connect (OSTI)

    1995-02-27

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. 16 figs., 66 tabs.

  7. Petroleum supply monthly, July 1997 with data from May 1997

    SciTech Connect (OSTI)

    1997-07-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  8. Petroleum supply monthly, December 1997 with data from October 1997

    SciTech Connect (OSTI)

    1997-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregates, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  9. Petroleum supply monthly, January 1999 with data for November 1998

    SciTech Connect (OSTI)

    1999-01-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 82 tabs.

  10. Petroleum supply monthly, May 1999, with data for March 1999

    SciTech Connect (OSTI)

    1999-05-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary supplies of petroleum products in the US (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

  11. Petroleum supply monthly, February 1999, with data for December 1998

    SciTech Connect (OSTI)

    1999-02-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  12. Petroleum supply monthly, October 1998, with data for August 1998

    SciTech Connect (OSTI)

    1998-10-01

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. A feature article, Accuracy of petroleum supply data, is also included. 72 tabs.

  13. Petroleum supply monthly, November 1998, with data for September 1998

    SciTech Connect (OSTI)

    1998-11-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the Unites States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

  14. Petroleum supply monthly, February 1998 with data from December 1997

    SciTech Connect (OSTI)

    1998-02-01

    The Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  15. Petroleum supply monthly, August 1998, with data for June 1998

    SciTech Connect (OSTI)

    1998-08-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 fig., 66 tabs.

  16. Petroleum supply monthly: July 1998, with data for May 1998

    SciTech Connect (OSTI)

    1998-07-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 56 tabs.

  17. Petroleum supply monthly, June 1999, with data for April 1999

    SciTech Connect (OSTI)

    1999-06-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  18. Petroleum supply monthly, March 1994

    SciTech Connect (OSTI)

    Not Available

    1994-03-30

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas -- the United States (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided from other sources.

  19. Petroleum supply monthly, June 1993

    SciTech Connect (OSTI)

    Not Available

    1993-06-28

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures ih the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas - - the United States (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided firom other sources.

  20. Trading places - an innovative SO{sub 2} trading program to mitigate potential adverse impacts on Class I areas: part I. impacts

    SciTech Connect (OSTI)

    Louis Militana; Cindy Huber; Christopher Colbert; Chris Arrington; Don Shepherd

    2005-07-01

    Published in two parts, this article describes a new emissions cap-and-trade program to reduce acid deposition and visibility impacts in four Class I areas (e.g. wildernesses and national parks) from the proposed Longview Power coal-fired power plant to be located in Maidsville, WV. Part I discusses the air quality impacts of the proposed project. 5 refs., 2 figs., 5 tabs.

  1. Trading places - an innovative SO{sub 2} trading program to mitigate potential adverse impacts on class I areas: part II. Mitigation plan

    SciTech Connect (OSTI)

    Louis Militana; Cindy Huber; Christopher Colbert; Chris Arrington; Don Shepherd

    2005-08-01

    This is the second of two articles describing a plan that was developed to mitigate the effects of acid deposition and visibility impairment in four Class I areas from the proposed Longview Power Project. Part I (published in July 2005) discussed the air quality impacts of the proposed coal-fired power plant. Part II discusses the mitigation plan. 2 refs., 1 fig., 3 tabs.

  2. Practical experience applied to the design of injection and sample manifolds to perform in-place surveillance tests according to ANSI/ASME N-510

    SciTech Connect (OSTI)

    Banks, E.M.; Wikoff, W.O.; Shaffer, L.L.

    1997-08-01

    At the current level of maturity and experience in the nuclear industry, regarding testing of air treatment systems, it is now possible to design and qualify injection and sample manifolds for most applications. While the qualification of sample manifolds is still in its infancy, injection manifolds have reached a mature stage that helps to eliminate the {open_quotes}hit or miss{close_quotes} type of design. During the design phase, manifolds can be adjusted to compensate for poor airflow distribution, laminar flow conditions, and to take advantage of any system attributes. Experience has shown that knowing the system attributes before the design phase begins is an essential element to a successful manifold design. The use of a spreadsheet type program commonly found on most personal computers can afford a greater flexibility and a reduction in time spent in the design phase. The experience gained from several generations of manifold design has culminated in a set of general design guidelines. Use of these guidelines, along with a good understanding of the type of testing (theoretical and practical), can result in a good manifold design requiring little or no field modification. The requirements for manifolds came about because of the use of multiple banks of components and unconventional housing inlet configurations. Multiple banks of adsorbers and pre and post HEPA`s required that each bank be tested to insure that each one does not exceed a specific allowable leakage criterion. 5 refs., 5 figs., 1 tab.

  3. Characteristics of the WWR-K test core and the LEU LTAS to be placed in the central experimental beryllium device.

    SciTech Connect (OSTI)

    Arinkin, F.; Chakrov, P.; Chekushina, L.; Gizatulin,, Sh.; Koltochnik, S.; Hanan, N.; Garner, P.; Nuclear Engineering Division; Kazakhstan Ministry of Energy and Mineral Resources

    2010-03-01

    In 2010 life test of three LEU (19.7%) lead test assemblies (LTA) is expected in the existing WWR-K reactor core with regular WWR-C-type fuel assemblies and a smaller core with a beryllium insert. Preliminary analysis of test safety is to be carried out. It implies reconstruction of the reactor core history for last three years, including burnup calculation for each regular fuel assembly (FA), as well as calculation of characteristics of the test core. For the planned configuration of the test core a number of characteristics have been calculated. The obtained data will be used as input for calculations on LTA test core steady-state thermal hydraulics and on transient analysis.

  4. CLUSTERING OF OBSCURED AND UNOBSCURED QUASARS IN THE BOOeTES FIELD: PLACING RAPIDLY GROWING BLACK HOLES IN THE COSMIC WEB

    SciTech Connect (OSTI)

    Hickox, Ryan C.; Alexander, David M.; Goulding, Andrew D.; Myers, Adam D.; Brodwin, Mark; Forman, William R.; Jones, Christine; Murray, Stephen S.; Eisenstein, Daniel; Caldwell, Nelson; Brown, Michael J. I.; Cool, Richard J.; Kochanek, Christopher S.; Dey, Arjun; Jannuzi, Buell T.; Assef, Roberto J.; Eisenhardt, Peter R.; Gorjian, Varoujan; Stern, Daniel; Le Floc'h, Emeric

    2011-04-20

    We present the first measurement of the spatial clustering of mid-infrared-selected obscured and unobscured quasars, using a sample in the redshift range 0.7 < z < 1.8 selected from the 9 deg{sup 2} Booetes multiwavelength survey. Recently, the Spitzer Space Telescope and X-ray observations have revealed large populations of obscured quasars that have been inferred from models of the X-ray background and supermassive black hole evolution. To date, little is known about obscured quasar clustering, which allows us to measure the masses of their host dark matter halos and explore their role in the cosmic evolution of black holes and galaxies. In this study, we use a sample of 806 mid-infrared-selected quasars and {approx}250,000 galaxies to calculate the projected quasar-galaxy cross-correlation function w{sub p} (R). The observed clustering yields characteristic dark matter halo masses of log(M{sub halo} [h {sup -1} M{sub sun}]) = 12.7{sup +0.4}{sub -0.6} and 13.3{sup +0.3}{sub -0.4} for unobscured quasars (QSO-1s) and obscured quasars (Obs-QSOs), respectively. The results for QSO-1s are in excellent agreement with previous measurements for optically selected quasars, while we conclude that the Obs-QSOs are at least as strongly clustered as the QSO-1s. We test for the effects of photometric redshift errors on the optically faint Obs-QSOs, and find that our method yields a robust lower limit on the clustering; photo-z errors may cause us to underestimate the clustering amplitude of the Obs-QSOs by at most {approx}20%. We compare our results to previous studies, and speculate on physical implications of stronger clustering for obscured quasars.

  5. Looking For Value in All The Wrong Places. Toward Expanded Consideration of Green and High Performance Attributes in Non-residential Property Appraisals in the United States

    SciTech Connect (OSTI)

    Mills, Evan

    2015-10-21

    Large numbers of commercial buildings have sought to improve their energy and environmental performance, with half of all leasable U.S. offices now designated at some level of “green”. All proper/es fall somewhere on the green/high-­performance spectrum (above and below average) whether or not they bear a formal label or ra/ng.1 Variations in the level of performance can either positively or negatively influence value. This component of value can be shaped by many factors, from utility costs to tenant/owner preferences that translate into income (rent levels, vacancy rates, lease-­up /mes, etc.). Occupant perceptions of indoor environmental quality are another potential influence on value. While there has been little uptake of this thinking by practicing appraisers, the increased prevalence of green/HP practices combined with concerns about appraiser competency are compelling the industry to adapt their traditional techniques to this new driver of value. However, the overly narrow focus of policymakers on appraisal of labeled or rated exemplary buildings (e.g., LEED or ENERGY STAR Certified) represents a significant missed opportunity. Any level of green or energy performance can in fact influence value, including below-­average performance (a.k.a. “brown discount”), irrespec/ve of whether or not the building has been formally rated. Another surmountable challenge is the limitations to non-­appraisers’ understanding of the appraisal process (and constraints therein). A crucial byproduct of this is unrealistic expectations of what appraisers can and will do in the marketplace. This report identifies opportunities for catalyzing improvement of the green/HP appraisal process, which apply to all involved actors—from owner, report-­ordering client, the appraiser, and the appraisal reviewer—and fostering more demand for appraisals that recognize green/HP property attributes. The intended audience is primarily the public policy community and other stakeholders outside the formal appraisal community who can contribute to the broader effort to advance professional practces. The discussion begins with a descripton of the appraisal process and the points at which green/HP consideratons can enter the analysis. A series of major barriers to better practces are identfied along with approaches to reducing them.

  6. Apparatus for use in placing a submarine structure on the sea bed alongside an underwater well and method of drilling a plurality of closely spaced underwater wells

    SciTech Connect (OSTI)

    Shotbolt, K.

    1982-03-02

    A template for spacing a submarine structure such as an anchor block or a guide base for a second underwater well alongside an existing underwater well comprises a beam attached at one end, by means of a hinge, to a lowering guide which can be threaded over and be lowered along two guide wires of the first well, and at the other end by a remote-controlled release mechanism to the submarine structure such as the anchor block itself or a guide base for a second well. The beam, with such a submarine structure attached, is lowered down the guide wires while held in a vertical configuration, and is then swung into a generally horizontal configuration at the sea bed.

  7. Petroleum supply monthly, August 1995 with data for June 1995

    SciTech Connect (OSTI)

    1995-08-25

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  8. Petroleum supply monthly, August 1994

    SciTech Connect (OSTI)

    Not Available

    1994-08-26

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  9. Petroleum supply monthly: September 1996, with data for July 1996

    SciTech Connect (OSTI)

    1996-09-01

    Data presented in this report describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 56 tabs.

  10. How to effectively revalidate PHAs

    SciTech Connect (OSTI)

    Crumpler, D.K.; Whittle, D.K. [JBF Associates, Inc., Knoxville, TN (United States)

    1996-10-01

    Under OSHA process safety management (PSM) standard 29 CFR 1910.119, process hazard analyses (PHAs) must be updated and revalidated at least every five years. This rule was promulgated in 1992; however, many operating companies began PHA programs as early as 1990. Now these initial PHAs must be revalidated due to the time limit. Because OSHA 1910.119 only gives guidance, hydrocarbon processing industry companies can select the revalidation method to use and have several options: redo the PHA as if it were the initial one; retrofit, update and revalidate the PHA by concentrating on deficiencies in the original analysis and incorporating process changes; and update and revalidate the original PHA for process changes only. Using guidelines and the evaluation flow diagram, companies can cost-effectively decide how much rework is needed to maintain PSM compliance. The paper discusses regulatory requirements, revalidation approaches, collect supporting documentation, initial/previous PHA quality, operating experience, conducting and documenting revalidation analyses, and documentation.

  11. Management of change lessons learned

    SciTech Connect (OSTI)

    Jakubowski, J.A. [Upjohn Co., Kalamazoo, MI (United States)

    1996-08-01

    This paper will describe the development of a computer program that was written to assist production units meet the requirements of the management of chance (MOC) section under the OSHA Process Safety Management (PSM) Standard, 29 CFR 1910.119 (1). Areas that will be addressed include: the development of a MOC written policy, pilot testing of change control management procedures, training of operational and maintenance personnel to follow these procedures and final implementation of established chance control measures. Practical {open_quotes}lessons learned{close_quotes} will be reviewed and a description of the use of an Access{sup {trademark}}program that was written to enhance daily MOC equipment and process changes will be highlighted. This program was designed to expedite the required PSM review of changes and to simultaneously trigger an update of related change documentation such as piping and instrumentation diagrams, equipment files, regulatory permits, and unit operating procedures.

  12. High-resolution study of 0{sup +} and 2{sup +} excitations in {sup 168}Er with the (p,t) reaction

    SciTech Connect (OSTI)

    Bucurescu, D. [Horia Hulubei National Institute of Physics and Nuclear Engineering, P.O. Box MG-6, R-76900 Bucharest (Romania); Graw, G.; Hertenberger, R. [Sektion Physik, Ludwig Maximilians Universitaet Muenchen, Am Coulombwall 1, D-85748 Garching (Germany); Wirth, H.-F.; Faestermann, T.; Kruecken, R.; Mahgoub, M. [Physik Department, Technische Universitaet Muenchen, D-85748 Garching (Germany); Lo Iudice, N. [Dipartimento di Scienze Fisiche, Universita di Napoli 'Federico II' and Istituto Nazionale di Fisica Nucleare, Monte S Angelo, Via Cintia I-80126 Naples (Italy); Sushkov, A.V.; Shirikova, N.Yu. [Bogoliubov Laboratory of Theoretical Physics, Joint Institute for Nuclear Research, RU-141980 Dubna (Russian Federation); Sun, Y. [Department of Physics and Joint Institute for Nuclear Astrophysics, University of Notre Dame, Notre Dame, Indiana 46556 (United States); Department of Physics, Tsinghua University, Beijing 100084 (China); Department of Physics, Xuzhou Normal University, Xuzhou, Jiangsu 221009 (China); Jolie, J.; Brentano, P. von; Braun, N.; Heinze, S.; Moeller, O.; Muecher, D.; Scholl, C. [Institut fuer Kernphysik, Universitaet zu Koeln, D-50937 Cologne (Germany); Casten, R.F.; Meyer, D.A. [Wright Nuclear Structure Laboratory, Yale University, New Haven, Connecticut 06520-8124 (United States)

    2006-06-15

    Excited states in the deformed nucleus {sup 168}Er have been studied with high-energy resolution, in the (p,t) reaction, with the Munich Q3D spectrograph. A number of 25 excited 0{sup +} states (four tentative) and 63 2{sup +} states have been assigned up to 4.0 MeV excitation energy. This unusually rich characterization of the 0{sup +} and 2{sup +} states in a deformed nucleus, close to a complete level scheme, offers a unique opportunity to check, in detail, models of nuclear structure that incorporate many excitation modes. A comparison of the experimental data is made with two such models: the quasiparticle-phonon model (QPM), and the projected shell model (PSM). The PSM wave functions appear to contain fewer correlations than those of the QPM and than required by the data.

  13. Managing a Process Safety Management inspection

    SciTech Connect (OSTI)

    Mulvey, N.P. [AcuTech Consulting, Inc., Princeton, NJ (United States)

    1995-12-31

    The Occupational Safety and Health Administration (OSHA) Process Safety Management (PSM) regulations (29 CFR {section} 1910.119) have been in effect for almost three years. State level risk management programs, in New Jersey, California, and Delaware have been in effect for over six years. More recently, Nevada and Louisiana have enacted process safety management programs. These regulations have had a significant impact on all phases of plant operations, including preliminary design, construction, startup, and operations. Through proper planning and the commitment of resources, many facilities are beginning to realize the benefits of well developed PSM programs. This paper will discuss in greater detail some of these benefits, and in particular, the subject of governmental inspections of facilities for process safety management programs.

  14. A power sensitivity model for electromechanical oscillation studies

    SciTech Connect (OSTI)

    Deckmann, S.M.; Costa, V.F. da (Unicamp, Campinas (Brazil))

    1994-05-01

    This paper describes the derivation of a power sensitivity model for dynamic studies of power systems, subjected to normal operation disturbances. The need of an infinite bus representation is avoided with the linearized nodal power balance approach. This permits the model to be easily extended to any number of network buses. In the linearized form, the resulting Power Sensitivity Model (PSM), presents some interesting features, such as decoupled modeling and time scale decomposition properties. For presentation reasons, the PSM is first derived for a single generator connected to an infinite bus. Its performance is then compared with the classical Heffron-Phillips Model (HPM), as described by de Mello and Concordia. It is then extended for multinodal networks.

  15. Properties of the 0{sub 2}{sup +} state and isospin excitation in the N=Z nucleus {sup 68}Se

    SciTech Connect (OSTI)

    Al-Khudair, Falih H.; Li, Y. S.; Long, G. L. [Key Laboratory for Quantum Information and Measurements and Department of Physics, Tsinghua University, Beijing 100084 (China); Center of Nuclear Theory, Lanzhou National Laboratory of Accelerators, Lanzhou 730000 (China)

    2007-05-15

    Band structure and electromagnetic transition properties of the low-lying states in the N=Z {sup 68}Se nucleus were studied within the framework of interacting boson model 3. The isospin excitation states with T>T{sub Z} are identified. The M1 and E2 matrix elements for low-lying states have been investigated and were used to identify the low-lying mixed symmetry states. Special attention is given to the occurrence of 0{sub 2}{sup +} state, recently predicted by the projected shell-model (PSM) calculation. The present predicted spectrum for {sup 68}Se is close to the recent PSM results and confirms the results for the 0{sub 2}{sup +} state. The calculated results are compared with available experimental data, and they are in general good agreement.

  16. Petroleum supply monthly, May 1998, with data for March 1998

    SciTech Connect (OSTI)

    1998-05-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 16 figs., 66 tabs.

  17. Petroleum supply monthly, December 1998 with data for October 1998

    SciTech Connect (OSTI)

    1998-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. 82 tabs.

  18. Petroleum supply monthly with data from January 1998

    SciTech Connect (OSTI)

    1998-03-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  19. Petroleum supply monthly with data for March 1997

    SciTech Connect (OSTI)

    1997-05-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  20. Petroluem Supply Monthly, May 1993

    SciTech Connect (OSTI)

    Not Available

    1993-06-04

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  1. Brochure Hydraulic Institute Standards Overview | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydraulic Institute Standards Overview Brochure Hydraulic Institute Standards Overview If you specify, select, design, test, install or operate pumps or pumping systems, you will find ANSI/HI Pump Standards to be invaluable tools. I_Brochure_Hydraulic_Institute_Stds_Overview.pdf (1.85 MB) More Documents & Publications Brochure HI Standards Subscription Options Summary of 2011 Accomplishments HI & PSM Summary of HI Standards Relating to Energy Efficency

  2. Improve grinding control

    SciTech Connect (OSTI)

    Burger, J.R.

    1985-06-01

    The on-stream particle analyzer is an instrument with many potential uses. The most common practice in mineral benefication is to use it to monitor grinding mill discharge after the pulp has passed through a classifying cyclone. The instrument samples and analyzes the cyclone overflow. The resulting signal can be used to automatically adjust grinding variables or the data readout can be used to guide manual changes. The design of the Armco PSM-400 and its operation are described.

  3. Electrostatically Self-assembled Amphiplexes

    SciTech Connect (OSTI)

    Helmut H. Strey

    2011-02-15

    This research will focus on characterizing the phase behavior of polyelectrolyte-surfactant microemulsions (PSM) that were recently discovered in our lab and indentifing possible uses of their long-range ordered nanostructures towards bioseparation, oil-recovery and drug delivery systems. In addition, we are proposing strategies for synthesizing solid and long-range ordered materials with unit cells on the nanometer scale using polymerization and/or cross-linking to solidify the soft template.

  4. Appendix C Impact of Revisions on Major Series, 2015-2016

    U.S. Energy Information Administration (EIA) Indexed Site

    C Impact of Revisions on Major Series, 2015-2016" "(Thousands of Barrels per Day Except Where Noted)" "This table contains information on revisions to published statistics. The table shows the published value in the Petroleum Supply Monthly (PSM), the revised value, and the difference for the major product series. Except for crude oil field production and adjustments, the official published petroleum supply statistics are not changed to reflect revisions until publication of

  5. Petroleum supply monthly, July 1999, with data for May 1999

    SciTech Connect (OSTI)

    1999-07-01

    The Petroleum Supply Monthly (PSM) is one of a family of four petroleum supply publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The Detail Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided from other sources.

  6. Petroleum Supply Monthly, March 1996 (with data for January 1996)

    SciTech Connect (OSTI)

    1996-04-04

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  7. Petroleum supply monthly, October 1992

    SciTech Connect (OSTI)

    Not Available

    1992-10-27

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately, represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  8. Petroleum supply monthly, April 1993

    SciTech Connect (OSTI)

    Not Available

    1993-05-04

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  9. Petroleum supply monthly, May 1994

    SciTech Connect (OSTI)

    Not Available

    1994-05-27

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum supply annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  10. Petroleum supply monthly, October 1992. [USA

    SciTech Connect (OSTI)

    Not Available

    1992-10-27

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately, represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  11. Petroleum supply monthly, September 1995 with data for July 1995

    SciTech Connect (OSTI)

    1995-09-27

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  12. Petroleum monthly supply, November 1992. [Contains glossary

    SciTech Connect (OSTI)

    Not Available

    1992-11-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  13. Petroleum supply monthly, February 1993

    SciTech Connect (OSTI)

    Not Available

    1993-03-02

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  14. Petroleum supply monthly, December 1992

    SciTech Connect (OSTI)

    Not Available

    1992-12-29

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  15. Petroleum supply monthly, April 1993. [Contains glossary

    SciTech Connect (OSTI)

    Not Available

    1993-05-04

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  16. Petroleum supply monthly, January 1993. [Contains glossary

    SciTech Connect (OSTI)

    Not Available

    1993-01-27

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  17. Petroleum supply monthly, June 1994

    SciTech Connect (OSTI)

    Not Available

    1994-06-28

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  18. Petroleum monthly supply, November 1992

    SciTech Connect (OSTI)

    Not Available

    1992-11-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  19. Petroleum supply monthly, June 1995 with data for April 1995

    SciTech Connect (OSTI)

    1995-06-28

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  20. Petroleum supply monthly, October 1993

    SciTech Connect (OSTI)

    Not Available

    1993-10-26

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  1. Petroleum supply monthly, July 1994

    SciTech Connect (OSTI)

    Not Available

    1994-07-26

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  2. Petroleum Supply Monthly

    SciTech Connect (OSTI)

    1996-02-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  3. Petroleum supply monthly, May 1995 with data for March 1995

    SciTech Connect (OSTI)

    1995-05-25

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  4. Petroleum supply monthly, July 1995 with data for May 1995

    SciTech Connect (OSTI)

    1995-07-27

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  5. Petroleum supply monthly, January 1996

    SciTech Connect (OSTI)

    1996-02-15

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  6. Petroleum supply monthly, January 1993

    SciTech Connect (OSTI)

    Not Available

    1993-01-27

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  7. Petroleum supply monthly, December 1992. [Contains glossary

    SciTech Connect (OSTI)

    Not Available

    1992-12-29

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  8. Petroleum supply monthly, November 1994

    SciTech Connect (OSTI)

    Not Available

    1994-11-29

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  9. Petroleum supply monthly, October 1994

    SciTech Connect (OSTI)

    Not Available

    1994-10-27

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: Petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  10. Design an optimum safety policy for personnel safety management - A system dynamic approach

    SciTech Connect (OSTI)

    Balaji, P.

    2014-10-06

    Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

  11. Petroleum Supply Monthly, August 1990

    SciTech Connect (OSTI)

    Not Available

    1990-10-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) district movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  12. Petroleum supply monthly, September 1991

    SciTech Connect (OSTI)

    Not Available

    1991-09-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administrations for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics. 65 tabs.

  13. Petroleum supply monthly, April 1990

    SciTech Connect (OSTI)

    1990-06-26

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the Petroleum Supply Monthly describe (PSM) the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply.'' Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: (1) the Summary Statistics and (2) the Detailed Statistics.

  14. Fast switching, modular high-voltage DC/AC-power supplies for RF-Amplifiers and other applications

    SciTech Connect (OSTI)

    Alex, J.; Schminke, W. [Thomcast AG, Turgi (Switzerland)

    1995-12-31

    A new kind of high voltage high-power Pulse-Step Modulator (PSM) for broadcast transmitters, accelerator sources, for NBI (Neutral Beam Injection for Plasma Heating), gyrotrons and klystrons has been developed. Since its first introduction in 1984 for broadcast transmitters, more than 100 high-power sound broadcast transmitters had been equipped with the first generation of the PSM modulators, using Gate Turn-Off Thyristors (GTOs) as switching elements. Recently, due to faster switching elements and making use of the latest DSP technologies (Digital Signal Processing), the performance data and areas of application could be extended further. In 1994, a precision high voltage source for MW gyrotrons was installed at CRPP in Lausanne. Supplementary very low cost solutions for lower powers but high voltages had been developed. Hence, today, a large area of applications can be satisfied with the family of solutions. The paper describes the principle of operation, the related control systems and refers to some particular applications of the PSM amplifiers, especially the newest developments and corresponding field results.

  15. Critical success factors in implementing process safety management

    SciTech Connect (OSTI)

    Wilson, D.J. [Chevron USA, Inc., New Orleans, LA (United States)

    1996-08-01

    This paper focuses on several {open_quotes}Critical Success Factors {close_quotes} which will determine how well employees will embrace and utilize the changes being asked of them to implement Process Safety Management (PSM). These success factors are applicable to any change which involves asking employees to perform activities differently than they are currently performing them. This includes changes in work processes (the way we arrange and conduct a set of tasks) or changes in work activities (how we perform individual tasks). Simply developing new work processes and explaining them to employees is not enough to ensure that employees will actually utilize them -- no matter how good these processes are. To ensure successful, complete implementation of Process Safety Management, we must manage the transition from how we perform our work now to how we will perform it after PSM is implemented. Environmental and safety performance improvements, facility reliability and operability increases, and employee effectiveness and productivity gains CAN NOT be achieved until Process Safety Management processes are fully implemented. To successfully implement management of change, mechanical integrity, or any of the other processes in PSM, each of the following critical success factors must be carefully considered and utilized as appropriate. They are: (1) Vision of a Future State, Current State Assessment, and a Detailed Plan to Achieve the Future State, (2) Management Commitment, (3) Ownership by Key Individuals, (4) Justification for Actions, (5) Autonomy to Customize the Process, (6) Feedback Mechanism to Adjust Activities, and (7) Process to Refocus & Redirect Efforts.

  16. Evaporation of multicomponent drop arrays

    SciTech Connect (OSTI)

    Annamalai, K.; Ryan, W.; Chandra, S. (Texas A M Univ., College Station, TX (United States))

    1993-08-01

    The present paper deals with the evaporation of multicomponent fuel droplets in an array using the recently developed point source method (PSM). First, the quasisteady (QS) evaporation of an isolated, multicomponent droplet is briefly analyzed. The resultant governing equations, along with Raoult's law and the Cox-Antoine relation, constitute the set of equations needed to arrive at the solutions for: (1) the droplet surface temperature, (2) the evaporation rate of each species, and (3) the vapor mass fraction of each species at the droplet surface. The PSM, which treats the droplet as a point mass source and heat sink, is then adopted to obtain an analytic expression for the evaporation rate of a multicomponent droplet in an array of liquid droplets. Defining the correction factor ([eta]) as a ratio of the evaporation of a drop in an array to the evaporation rate of a similar isolated multicomponent drop, an expression for the correction factor is obtained. The results of the point source method (PSM) are then compared with those obtained elsewhere for a three-drop array that uses the method of images (MOI). Excellent agreement is obtained. The treatment is then extended to a binary drop array to study the effect of interdrop spacing on vaporization. 20 refs., 11 figs., 4 tabs.

  17. Design of impressed current cathodic protection (ICCP) systems for U.S. Navy hulls

    SciTech Connect (OSTI)

    Lucas, K.E.; Thomas, E.D.; Kaznoff, A.I.; Hogan, E.A.

    1999-07-01

    The goal of impressed current cathodic protection (ICCP) design for ship hulls, under the Navy Ship's Technical Manual (NSTM, Chapter 633), is to provide a uniform potential distribution at {minus}0.85 V, {+-}0.05 V, versus a silver/silver chloride (Ag/AgCl) reference cell, over the wetted hull surface during all operational aspects of an active ship. To accomplish this, the physical scale modeling (PSM) technique, combined with a rigid design protocol, has been used extensively by the US Navy to provide optimal and retrofit upgrade designs of ICCP systems for hulls. The ICCP design guidance, provided by the protocol, defines the hull properties, hull damage and general power supply requirements. PSM is utilized to determine optimal placement of ICCP components (anodes and reference cells) and to evaluate performance for up to a 15% wetted hull coatings loss under static (pierside) and dynamic (underway) conditions. Data are provided which illustrate the use of the design protocol criteria, along with the integrated PSM technique, to determine ICCP system design and evaluate performance.

  18. Petroleum Supply Monthly, September 1994

    SciTech Connect (OSTI)

    Not Available

    1994-09-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timelines and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: Petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  19. Petroleum supply monthly, January 1989

    SciTech Connect (OSTI)

    Not Available

    1989-03-01

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in ''Primary Supply.'' Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: (1) the Summary Statistics and (2) the Detailed Statistics. 12 figs., 46 tabs.

  20. Federal program for regulating highly hazardous materials finally takes off

    SciTech Connect (OSTI)

    Lessard, P.C. [Block Environmental Services Inc., Pleasant Hill, CA (United States)

    1996-11-01

    The Risk Management Program (RMP) rule, Section 112(r) of the Clean Air Act (CAA), was signed on May 24 and finalized on June 20. RMP is one of the most comprehensive, technically based regulatory programs for preventing, detecting and responding to accidental hazardous materials releases to have been issued in recent times. Although facilities have three years to comply, EPA estimates that the rule will affect an estimated 66,000 facilities that store highly hazardous or acutely toxic materials. The 1990 CAA Amendments are designed to prevent accidental releases of highly hazardous chemicals from stationary sources. Two significant regulatory programs that have emerged from the revised CAA are the Process Safety Management (PSM) standard and RMP. PSM is designed to protect employees and regulated by the Occupational Safety and Health Administration. RMP`s purpose is to protect the public and the environment from highly hazardous chemicals. It authorizes EPA to create a list of substances (distinct from the list generated under PSM) known to cause serious adverse effects and to implement a program for accidental chemical release prevention.

  1. Plant perspective on electronic document management systems for process safety management programs

    SciTech Connect (OSTI)

    Mannan, M.; Lee, W.S. [RMT/Jones and Neuse, Inc., Austin, TX (United States)

    1996-08-01

    As mandated by the Clean Air Act Amendments of 1990, the Occupational Safety and Health Administration (OSHA) promulgated on February 24, 1992 the Process Management (PSM) rule: 29 CFR 1910.119. Compliance with the PSM requirements is causing a significant impact on both financial resources and manpower for the covered facilities. A major portion of the efforts have been concentrated on developing and compiling a vast amount of data in various formats (i.e., autocad, word processing, and numeric databases). Because of the need to access and revise these data on a continuous basis, many facilities have started to implement computer-based document management systems to store, manage, and maintain these data. This paper provides a plant perspective of the necessary features and characteristics of a computer-based document management system. An electronic document management system can also form the basis for a plant workflow system. Once, all the information related to a plant`s PSM program are inputted into the system, it is possible to control the plant workflow using the management of change system and maintenance work requests. Other key issues that must be included in a computer-based system are redlining capabilities, execution of management of change authorization, and interfacing with existing computer programs (many plants are already using different kinds of software for a variety of objectives). This paper provides a roadmap for the development and implementation of an electronic document management system.

  2. Petroleum supply monthly, March 1989

    SciTech Connect (OSTI)

    Not Available

    1989-05-24

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in ''Primary Supply.'' Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  3. Petroleum supply monthly, June 1998 with data for April 1998

    SciTech Connect (OSTI)

    1998-06-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  4. Petroleum Supply Monthly, September 1998, with data for July 1998

    SciTech Connect (OSTI)

    1998-09-28

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the suppiy and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics

  5. Petroleum supply monthly, March 1999, with data for January 1999

    SciTech Connect (OSTI)

    1999-03-01

    The Petroleum Supply Monthly (PSM) is one of a family of four petroleum supply publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  6. Petroleum supply monthly, December 1995: With data for October 1995

    SciTech Connect (OSTI)

    1995-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. 16 figs., 6 tabs.

  7. Prospective Study Evaluating Postoperative Radiotherapy Plus 2-Year Androgen Suppression for Post-Radical Prostatectomy Patients With Pathologic T3 Disease and/or Positive Surgical Margins

    SciTech Connect (OSTI)

    Choo, Richard [Department of Radiation Oncology, Mayo Clinic, Rochester, MN (United States)], E-mail: choo.c@mayo.edu; Danjoux, Cyril; Gardner, Sandra; Morton, Gerard; Szumacher, Ewa; Loblaw, D. Andrew; Cheung, Patrick [Department of Radiation Oncology, Odette Cancer Centre, University of Toronto, Toronto, ON (Canada); Pearse, Maria [Department of Radiation Oncology, Auckland Hospital, Auckland (New Zealand)

    2009-10-01

    Purpose: To determine the efficacy of a combined approach of postoperative radiotherapy (RT) plus 2-year androgen suppression (AS) for patients with pathologic T3 disease (pT3) and/or positive surgical margins (PSM) after radical prostatectomy (RP). Methods and Materials: A total of 78 patients with pT3 and/or PSM after RP were treated with RT plus 2-year AS, as per a pilot, prospective study. Androgen suppression started within 1 month after the completion of RT and consisted of nilutamide for 4 weeks and buserelin acetate depot subcutaneously every 2 months for 2 years. Relapse-free rate, including freedom from prostate-specific antigen (PSA) relapse, was estimated using the Kaplan-Meier method. A Cox regression analysis was performed to evaluate prognostic factors for relapse. Prostate-specific antigen relapse was defined as a PSA rise above 0.2 ng/mL, with two consecutive increases over a minimum of 3 months. Results: The median age was 61 years at the time of RP. The median interval between RP and postoperative RT was 4.2 months. Forty-nine patients had undetectable PSA (<0.2 ng/mL), and 29 had persistently detectable postoperative PSA at the time of the protocol treatment. Median follow-up from RT was 6.4 years. Relapse-free rates at 5 and 7 years were 94.4% and 86.3%, respectively. Survival rates were 96% at 5 years and 93.1% at 7 years. On Cox regression analysis, persistently detectable postoperative PSA and pT3b-T4 were significant predictors for relapse. Conclusion: The combined treatment of postoperative RT plus 2-year AS yielded encouraging results for patients with pT3 and/or PSM and warrants a confirmatory study.

  8. Accidental release prevention requirement: Risk management programs under Clean Air Act section 112(r)(7)

    SciTech Connect (OSTI)

    Hahn, J. [Integrated Waste Services Association, Fairfield, NJ (United States)

    1997-12-01

    The Occupational Safety and Health Administration promulgates and enforces regulations that govern the health and safety of workers. OSHA rules often are considered to govern what happens {open_quotes}inside the fence line,{close_quotes} or within the physical boundaries of the facility. In some ways, the U.S. Environmental Protection Agency takes over where OSHA leaves off. The U.S. EPA is responsible for environmental programs {open_quotes}outside the fence line.{close_quotes} The concept is as simple as drawing a line, or is it? Anyone developing and implementing compliance programs, whether for OSHA or EPA, will tell you nothing is that simple. EPA`s recent promulgation of rules pertaining to risk management programs is a case in point. A new EPA rule is intended to compliment OSHA requirements under the Process Safety Management (PSM) rule. Under the OSHA rule, plant operators developed programs that ensure safe measures are in use when handling certain chemicals. During the past three years, waste-to-energy facilities faced difficult decisions when complying with the PSM requirements. Earlier this year, the US EPA promulgated its 112(r)(7) rule that is intended to `complement` OSHA`s PSM requirements. This is not always the case. Unfortunately, these new Clean Air Act requirements do not always complement, but may instead confuse plant operators. For example, EPA`s 112(r) rule may force plant operators to change, once again, their decisions on the use of selected chemicals. The US EPA estimates that approximately 66,000 facilities, including the 114 waste-to-energy facilities nationwide, may be affected by the list and risk management planning rules. The facilities include chemical and many other manufacturers, cold storage facilities with ammonia refrigeration systems, public water treatment systems, wholesalers and distributors of these chemicals, propane retailers, utilities, and federal facilities.

  9. Petroleum supply monthly, with data from June 1996

    SciTech Connect (OSTI)

    1996-08-01

    The Petroleum Supply Division (PSD) of the Energy Information Administration (EIA) collects and published information on petroleum supply and disposition in the United States. The information is collected through a series of surveys that make up the Petroleum Supply Reporting System (PSRS). The PSRS data are published in the Weekly Petroleum Status Report (WPSR), Petroleum Supply Monthly (PSM), and Petroleum Supply Annual (PSA). This report presents information on crude oil production, crude oil imports and exports, refinery operations, natural gas processing, transportation, and oxygenate data.

  10. Petroleum supply annual 1994. Volume 1

    SciTech Connect (OSTI)

    1995-05-22

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1994 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. The second volume contains final statistics for each month of 1994, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Below is a description of each section in Volume 1 of the PSA.

  11. Petroleum supply annual 1992: Volume 1. [Contains glossary

    SciTech Connect (OSTI)

    Not Available

    1993-05-26

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1992 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity and Oxygenate Capacity each with final annual data. The second volume contains final statistics for each month of 1992, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them.

  12. Petroleum supply annual 1992: Volume 1

    SciTech Connect (OSTI)

    Not Available

    1993-05-26

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1992 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity and Oxygenate Capacity each with final annual data. The second volume contains final statistics for each month of 1992, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them.

  13. Petroleum supply annual 1993. Volume 1

    SciTech Connect (OSTI)

    Not Available

    1994-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1993 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. The second volume contains final statistics for each month of 1993, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Below is a description of each section in Volume 1 of the PSA.

  14. Projected shell model study of neutron-rich deformed isotopes of Sr and Zr

    SciTech Connect (OSTI)

    Verma, Sonia; Dar, Parvaiz Ahmad; Devi, Rani [Department of Physics and Electronics, University of Jammu, Jammu-180006 (India)

    2008-02-15

    The projected shell model (PSM) study of {sup 98-102}Sr and {sup 100-104}Zr nuclei is carried out. The reliability of the ground-state wave function is checked by reproducing yrast spectra and electromagnetic properties. The mechanism for the onset of sudden and large deformation at N=60 is worked out. The present piece of research work has unified the two different, or conflicting, early explanations for the onset of deformation at N=60 by the spherical shell model and mean-field theory.

  15. Petroleum supply annual, 1997. Volume 1

    SciTech Connect (OSTI)

    1998-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1997 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1997, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. 16 figs., 48 tabs.

  16. Petroleum supply monthly, April 1994

    SciTech Connect (OSTI)

    Not Available

    1994-04-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographical regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US.

  17. Petroleum supply monthly with data from April 1996

    SciTech Connect (OSTI)

    1996-06-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  18. Petroleum supply monthly, with data for September 1995

    SciTech Connect (OSTI)

    1995-11-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  19. Petroleum supply monthly - with data for May 1996

    SciTech Connect (OSTI)

    1996-07-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. This document contains a glossary.

  20. Petroleum supply monthly, with data for August 1996

    SciTech Connect (OSTI)

    1996-10-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  1. Management concepts and safety applications for nuclear fuel facilities

    SciTech Connect (OSTI)

    Eisner, H.; Scotti, R.S.; Delicate, W.S.

    1995-05-01

    This report presents an overview of effectiveness of management control of safety. It reviews several modern management control theories as well as the general functions of management and relates them to safety issues at the corporate and at the process safety management (PSM) program level. Following these discussions, structured technique for assessing management of the safety function is suggested. Seven modern management control theories are summarized, including business process reengineering, the learning organization, capability maturity, total quality management, quality assurance and control, reliability centered maintenance, and industrial process safety. Each of these theories is examined for-its principal characteristics and implications for safety management. The five general management functions of planning, organizing, directing, monitoring, and integrating, which together provide control over all company operations, are discussed. Under the broad categories of Safety Culture, Leadership and Commitment, and Operating Excellence, key corporate safety elements and their subelements are examined. The three categories under which PSM program-level safety issues are described are Technology, Personnel, and Facilities.

  2. Using OSHA`s requirement for the revalidation of PHA`s to comply with EPA`s proposed risk management rule

    SciTech Connect (OSTI)

    Him, M.S.; Mannan, M. [RMT/Jones and Neuse, Inc., Austin, TX (United States)

    1996-11-01

    OSHA`s Process Safety Management rule not only requires the performance of process hazards analyses (PHA`s) of covered areas, but the revalidation of these PHA`s every 5 years. With the May 26, 1997 deadline for the completion of initial PHA`s nearing and the pending approval on or before March 1996 of EPA`s Risk Management Programs (RMP) for Chemical Accidental Release Prevention ({section}40 CFR 68), PSM-covered facilities must start developing plans for compliance with one or more of the requirements of these regulations. This paper discusses some of the strategies that companies falling under Tier 3 of EPA`s RMP rule may use to comply with OSHA`s revalidation of PHA`s and the upcoming EPA rule. The paper also provides details on the use of other PSM elements for PHA revalidation (such as compliance audits and management of change), the development of schedules for PHA revalidation, preparation time, the revalidation process, and the documentation/identification of RMP hazard scenarios.

  3. Using OSHA`s requirement for the revalidation of PHA`STo comply with EPA`s proposed risk management rule

    SciTech Connect (OSTI)

    Him, M.S.; Mannan, M. [RMT/Jones & Neuse, Inc., Austin, TX (United States)

    1996-08-01

    OSHA`s Process Safety Management rule not only requires the performance of process hazards analyses (PHA`s) of covered areas, but the revalidation of these PHA`s every 5 years. With the May 26, 1997 deadline for the completion of initial PHA`s nearing and the pending approval on or before March 1996 of EPA`s Risk Management Programs (RMP) for Chemical Accidental Release Prevention ({section}40 CFR 68), PSM-covered facilities must start developing plans for compliance with one or more of the requirements of these regulations. This paper discusses some of the strategies that companies falling under Tier 3 of EPA`s RMP rule may use to comply with OSHA`s revalidation of PHA`s and the upcoming EPA rule. The paper also provides details on the use of other PSM elements for PHA revalidation (such as compliance audits and management of change), the development of schedules for PHA revalidation, preparation time, the revalidation process, and the documentation/identification of RMP hazard scenarios.

  4. Accident prevention and Clean Air Act Amendments of 1990 with particular reference to anhydrous hydrogen fluoride

    SciTech Connect (OSTI)

    Kaiser, G.D. (Science Applications International Corp., McLean, VA (United States))

    1993-07-01

    The sections of the Clean Air Act Amendments (CAAA) of 1990 that refer to accident prevention are to be found in Title III. Two significant requirements of the CAAA in this respect relate to the responsibilities of the Occupational Safety and Health Administration (OSHA), which has promulgated a new Process Safety Management (PSM) standard and the Environmental Protection Agency (EPA), which at the time of writing, is developing Risk Management Program (RMP) regulations. The focus of this paper is on how the requirements of the CAAA may affect the reasons for performing a Quantitative Risk Assessment (QRA) or may affect the results of QRA. In order to limit the discussion, this paper focuses on HF. First, the CAAA requires that the EPA assess the hazards associated with HF; the EPA's current draft report is discussed. Second, a generic assessment of the risks associated with the use of HF is given, with emphasis on alkylation units in refineries. The principal contributors to risk are listed. Finally, an assessment of OSHA's PSM standard 29 CFR 1910.119, the related requirements of state laws such as California's Risk Management and Prevention Program and the potential requirement of EPA's Risk Management Program are given, including an assessment of how these requirements may influence quantitative estimates of risk. 13 refs., 1 fig.

  5. Process safety management and interim or remedial action plans

    SciTech Connect (OSTI)

    Boss, M.J.; Henney, D.A.; Heitzman, V.K. [HWS Consulting Group, Inc., Omaha, NE (United States); Day, D.W. [Army Corps of Engineers, Omaha, NE (United States)

    1996-12-31

    Remedial Actions, including Interim Remedial Activities, often require the use of treatment facilities or stabilization techniques using on-site chemical processes. As such, the 29 CFR 1910.119 Process Safety Management (PSM) of Highly Hazardous Chemicals (PSM Standard) and the USEPA regulations for Risk Management Planning require that these chemicals and their attendant potential hazards be identified. A Hazard and Operation (HAZOP) study, Failure Mode and Effect Analysis (FMEA), Fault Tree Analysis, or equivalent graphic presentation of processes must be completed. These studies form a segment of the Process Hazard Analysis (PHA). HAZOP addresses each system and each element of a system that could deviate from normal operations and thus cause a hazard. A full assessment of each process is produced by looking at the hazards, consequences, causes and personnel protection needed. Many variables must be considered when choosing the appropriate PHA technique including the size of the plant, the number of processes, the types of processes, and the types of chemicals used. A mixture of these techniques may be required to adequately transmit information about the process being evaluated.

  6. BP Oil Company`s approach to the analysis of process plant buildings

    SciTech Connect (OSTI)

    Fryman, C.E. [BP Oil Co., Cleveland, OH (United States). HSE Dept.

    1996-11-01

    Explosions occurring in petroleum refineries and chemical plants have caused fatalities in occupied buildings. For the 5-year period from 1989 through 1994, there were four major incidents. All of these incidents caused multiple fatalities to people working in process buildings, and all of these incidents resulted in very large losses, exceeding $100 million dollars for most of the incidents. The OSHA Process Safety Management (PSM) regulation requires sites to address facility siting when conducting process hazards and analyses. This requirement applies to all occupied buildings in a facility, not just control rooms. OSHA has issued several citations for failure to comply with this PSM requirement, and some companies have disputed the validity of some of these citations. The US industry experienced some difficulties deciding on the proper methodology to use in meeting this regulatory requirement. To address these industry concerns, the American Petroleum Institute (API) and the Chemical Manufacturers Association (CMA) developed guidance that was published in June 1995, RP-752, Management of Hazards Associated with the Location of Process Plant Buildings.

  7. Shell model method for Gamow-Teller transitions in heavy, deformed nuclei

    SciTech Connect (OSTI)

    Gao Zaochun [Joint Institute for Nuclear Astrophysics and Department of Physics, University of Notre Dame, Notre Dame, Indiana 46556 (United States); Department of Physics and Astronomy and National Superconducting Cyclotron Laboratory, Michigan State University, East Lansing, Michigan 48824 (United States); China Institute of Atomic Energy, P.O. Box 275 (18), Beijing 102413 (China); Sun Yang [Joint Institute for Nuclear Astrophysics and Department of Physics, University of Notre Dame, Notre Dame, Indiana 46556 (United States); Chen, Y.-S. [China Institute of Atomic Energy, P.O. Box 275(18), Beijing 102413 (China); Institute of Theoretical Physics, Academia Sinica, Beijing 100080 (China)

    2006-11-15

    A method for calculation of Gamow-Teller transition rates is developed by using the concept of the Projected Shell Model (PSM). The shell model basis is constructed by superimposing angular-momentum-projected multiquasiparticle configurations, and nuclear wave functions are obtained by diagonalizing the two-body interactions in these projected states. Calculation of transition matrix elements in the PSM framework is discussed in detail, and the effects caused by the Gamow-Teller residual forces and by configuration-mixing are studied. With this method, it may become possible to perform a state-by-state calculation for {beta}-decay and electron-capture rates in heavy, deformed nuclei at finite temperatures. Our first example indicates that, while experimentally known Gamow-Teller transition rates from the ground state of the parent nucleus are reproduced, stronger transitions from some low-lying excited states are predicted to occur, which may considerably enhance the total decay rates once these nuclei are exposed to hot stellar environments.

  8. Petroleum supply monthly

    SciTech Connect (OSTI)

    1995-10-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blends, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  9. Corrective Action Decision Document/Closure Report for Corrective Action Unit 106: Area 5, 11 Frenchman Flat Atmospheric Sites, Nevada National Security Site, Nevada, Revision 0

    SciTech Connect (OSTI)

    Patrick Matthews and Dawn Peterson

    2011-09-01

    Corrective Action Unit 106 comprises four corrective action sites (CASs): (1) 05-20-02, Evaporation Pond; (2) 05-23-05, Atmospheric Test Site - Able; (3) 05-45-04, 306 GZ Rad Contaminated Area; (4) 05-45-05, 307 GZ Rad Contaminated Area. The purpose of this CADD/CR is to provide justification and documentation supporting the recommendation that no further corrective action is needed for CAU 106 based on the implementation of corrective actions. The corrective action of clean closure was implemented at CASs 05-45-04 and 05-45-05, while no corrective action was necessary at CASs 05-20-02 and 05-23-05. Corrective action investigation (CAI) activities were performed from October 20, 2010, through June 1, 2011, as set forth in the Corrective Action Investigation Plan for Corrective Action Unit 106: Areas 5, 11 Frenchman Flat Atmospheric Sites. The approach for the CAI was divided into two facets: investigation of the primary release of radionuclides, and investigation of other releases (mechanical displacement and chemical releases). The purpose of the CAI was to fulfill data needs as defined during the data quality objective (DQO) process. The CAU 106 dataset of investigation results was evaluated based on a data quality assessment. This assessment demonstrated the dataset is complete and acceptable for use in fulfilling the DQO data needs. Investigation results were evaluated against final action levels (FALs) established in this document. A radiological dose FAL of 25 millirem per year was established based on the Industrial Area exposure scenario (2,250 hours of annual exposure). The only radiological dose exceeding the FAL was at CAS 05-45-05 and was associated with potential source material (PSM). It is also assumed that additional PSM in the form of depleted uranium (DU) and DU-contaminated debris at CASs 05-45-04 and 05-45-05 exceed the FAL. Therefore, corrective actions were undertaken at these CASs that consisted of removing PSM and collecting verification

  10. Greeley's Maplewood Middle School Stellar in Solar Car Race

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Middle School, second place; Fountain Middle School, third place; Englewood's Beacon Country Day School, fourth place; and Grand Junction's Orchard Mesa Middle School, fifth place. ...

  11. Recent progress in the synthesis of metal–organic frameworks

    SciTech Connect (OSTI)

    Sun, Yujia; Zhou, Hong -Cai

    2015-09-25

    Metal–organic frameworks (MOFs) have attracted considerable attention for various applications due to their tunable structure, porosity and functionality. In general, MOFs have been synthesized from isolated metal ions and organic linkers under hydrothermal or solvothermal conditions via one-spot reactions. The emerging precursor approach and kinetically tuned dimensional augmentation strategy add more diversity to this field. In addition, to speed up the crystallization process and create uniform crystals with reduced size, many alternative synthesis routes have been explored. Recent advances in microwave-assisted synthesis and electrochemical synthesis are presented in this review. In recent years, post-synthetic approaches have been shown to be powerful tools to synthesize MOFs with modified functionality, which cannot be attained via de novo synthesis. In this study, some current accomplishments of post-synthetic modification (PSM) based on covalent transformations and coordinative interactions as well as post-synthetic exchange (PSE) in robust MOFs are provided.

  12. Recent progress in the synthesis of metal–organic frameworks

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sun, Yujia; Zhou, Hong -Cai

    2015-09-25

    Metal–organic frameworks (MOFs) have attracted considerable attention for various applications due to their tunable structure, porosity and functionality. In general, MOFs have been synthesized from isolated metal ions and organic linkers under hydrothermal or solvothermal conditions via one-spot reactions. The emerging precursor approach and kinetically tuned dimensional augmentation strategy add more diversity to this field. In addition, to speed up the crystallization process and create uniform crystals with reduced size, many alternative synthesis routes have been explored. Recent advances in microwave-assisted synthesis and electrochemical synthesis are presented in this review. In recent years, post-synthetic approaches have been shown to bemore » powerful tools to synthesize MOFs with modified functionality, which cannot be attained via de novo synthesis. In this study, some current accomplishments of post-synthetic modification (PSM) based on covalent transformations and coordinative interactions as well as post-synthetic exchange (PSE) in robust MOFs are provided.« less

  13. Masters Study in Advanced Energy and Fuels Management

    SciTech Connect (OSTI)

    Mondal, Kanchan

    2014-12-08

    There are currently three key drivers for the US energy sector a) increasing energy demand and b) environmental stewardship in energy production for sustainability and c) general public and governmental desire for domestic resources. These drivers are also true for energy nation globally. As a result, this sector is rapidly diversifying to alternate sources that would supplement or replace fossil fuels. These changes have created a need for a highly trained workforce with a the understanding of both conventional and emerging energy resources and technology to lead and facilitate the reinvention of the US energy production, rational deployment of alternate energy technologies based on scientific and business criteria while invigorating the overall economy. In addition, the current trends focus on the the need of Science, Technology, Engineering and Math (STEM) graduate education to move beyond academia and be more responsive to the workforce needs of businesses and the industry. The SIUC PSM in Advanced Energy and Fuels Management (AEFM) program was developed in response to the industries stated need for employees who combine technical competencies and workforce skills similar to all PSM degree programs. The SIUC AEFM program was designed to provide the STEM graduates with advanced technical training in energy resources and technology while simultaneously equipping them with the business management skills required by professional employers in the energy sector. Technical training include core skills in energy resources, technology and management for both conventional and emerging energy technologies. Business skills training include financial, personnel and project management. A capstone internship is also built into the program to train students such that they are acclimatized to the real world scenarios in research laboratories, in energy companies and in government agencies. The current curriculum in the SIUC AEFM will help fill the need for training both recent

  14. Petroleum supply monthly, February 1992. [Contains Glossary

    SciTech Connect (OSTI)

    Not Available

    1992-03-05

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  15. Petroleum supply annual 1992. Volume 2

    SciTech Connect (OSTI)

    Not Available

    1993-05-27

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1992 through annual and monthly surveys. The PSA is divided into two volumes. The first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. This second volume contains final statistics for each month of 1992, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary.

  16. Petroleum supply annual 1992. [Contains glossary

    SciTech Connect (OSTI)

    Not Available

    1993-05-27

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1992 through annual and monthly surveys. The PSA is divided into two volumes. The first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. This second volume contains final statistics for each month of 1992, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary.

  17. Petroleum supply monthly, February 1992

    SciTech Connect (OSTI)

    Not Available

    1992-03-05

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  18. Petroleum supply annual, 1997. Volume 2

    SciTech Connect (OSTI)

    1998-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1997 through monthly surveys. The PSA is divided into two volumes. The first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. The second volume contains final statistics for each month of 1997, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary. 35 tabs.

  19. Petroleum supply annual 1995: Volume 2

    SciTech Connect (OSTI)

    1996-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1995 through monthly surveys. The PSA is divided into two volumes. This first volume contains three sections: Summary Statistics, Detailed Statistics, and selected Refinery Statistics each with final annual data. The second volume contains final statistics for each month of 1995, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary.

  20. Petroleum supply annual 1996: Volume 2

    SciTech Connect (OSTI)

    1997-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1996 through monthly surveys. The PSA is divided into two volumes. The first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Capacity; each with final annual data. The second volume contains final statistics for each month of 1996, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary. 35 tabs.

  1. Petroleum Supply Monthly, July 1990

    SciTech Connect (OSTI)

    Not Available

    1990-09-28

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  2. Petroleum Supply Monthly, September 1990. [Contains glossary

    SciTech Connect (OSTI)

    Whited, D.; Jacobus, P.

    1990-11-28

    Data presented in this PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 46 tabs.

  3. Tampa Electric Company IGCC Project. Quarterly report, April 1 - June 30, 1996

    SciTech Connect (OSTI)

    1996-12-31

    Tampa Electric Company continued efforts to complete construction and start-up of the Polk Power Station, Unit {number_sign}1 which will use Integrated Gasification Combined Cycle (IGCC) technology for power generation. From an overall standpoint, the Project continues to track well. The completion of construction system turnovers to Start-up is encouraging. Start-up will accept responsibility of the plant until turnover to operations. The major focus continues to be on the production of first Syngas, scheduled for July 17. All construction, engineering, and start-up activities are in support of Syngas production. Key activities toward this goal include final checkout and startup of remaining gasification systems, completion of punch list items required for first syngas, finalization of operating procedures, preparation of site and area access control plans, site- wide safety training, and other Process Safety management (PSM) requirements.

  4. Translational-symmetry alternating phase shifting mask grating mark used in a linear measurement model of lithographic projection lens aberrations

    SciTech Connect (OSTI)

    Qiu Zicheng; Wang Xiangzhao; Bi Qunyu; Yuan Qiongyan; Peng Bo; Duan Lifeng

    2009-07-01

    A linear measurement model of lithographic projection lens aberrations is studied numerically based on the Hopkins theory of partially-coherent imaging and positive resist optical lithography (PROLITH) simulation. In this linearity model, the correlation between the mark's structure and its sensitivities to aberrations is analyzed. A method to design a mark with high sensitivity is proved and declared. By use of this method, a translational-symmetry alternating phase shifting mask (Alt-PSM) grating mark is redesigned with all of the even orders, {+-}3rd and {+-}5th order diffraction light missing. In the evaluation simulation, the measurement accuracies of aberrations prove to be enhanced apparently by use of the redesigned mark instead of the old ones.

  5. Petroleum supply annual 1994, Volume 2

    SciTech Connect (OSTI)

    1995-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1994 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. The second volume contains final statistics for each month of 1994, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary.

  6. Petroleum supply annual 1998: Volume 2

    SciTech Connect (OSTI)

    1999-06-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1998 through monthly surveys. The PSA is divided into two volumes. The first volume contains three sections: Summary Statistics, Detailed Statistics, and Refinery Statistics; each with final annual data. This second volume contains final statistics for each month of 1998, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary. 35 tabs.

  7. Petroleum supply monthly, July 1993

    SciTech Connect (OSTI)

    Not Available

    1993-07-29

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: Petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  8. Petroleum supply monthly, August 1993

    SciTech Connect (OSTI)

    Not Available

    1993-09-01

    This publication the Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report, (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. Data presented are divided into Summary Statistics and Detailed Statistics.

  9. Weld solidification cracking in 304 to 304L stainless steel

    SciTech Connect (OSTI)

    Hochanadel, Patrick W; Lienert, Thomas J; Martinez, Jesse N; Martinez, Raymond J; Johnson, Matthew Q

    2010-01-01

    A series of annulus welds were made between 304 and 304L stainless steel coaxial tubes using both pulsed laser beam welding (LBW) and pulsed gas tungsten arc welding (GTAW). In this application, a change in process from pulsed LBW to pulsed gas tungsten arc welding was proposed to limit the possibility of weld solidification cracking since weldability diagrams developed for GTAW display a greater range of compositions that are not crack susceptible relative to those developed for pulsed LBW. Contrary to the predictions of the GTAW weldability diagram, cracking was found. This result was rationalized in terms of the more rapid solidification rate of the pulsed gas tungsten arc welds. In addition, for the pulsed LBW conditions, the material compositions were predicted to be, by themselves, 'weldable' according to the pulsed LBW weldability diagram. However, the composition range along the tie line connecting the two compositions passed through the crack susceptible range. Microstructurally, the primary solidification mode (PSM) of the material processed with higher power LBW was determined to be austenite (A), while solidification mode of the materials processed with lower power LBW apparently exhibited a dual PSM of both austenite (A) and ferrite-austenite (FA) within the same weld. The materials processed by pulsed GT A W showed mostly primary austenite solidification, with some regions of either primary austenite-second phase ferrite (AF) solidification or primary ferrite-second phase austenite (FA) solidification. This work demonstrates that variations in crack susceptibility may be realized when welding different heats of 'weldable' materials together, and that slight variations in processing can also contribute to crack susceptibility.

  10. Weld solidification cracking in 304 to 204L stainless steel

    SciTech Connect (OSTI)

    Hochanadel, Patrick W; Lienert, Thomas J; Martinez, Jesse N; Johnson, Matthew Q

    2010-09-15

    A series of annulus welds were made between 304 and 304L stainless steel coaxial tubes using both pulsed laser beam welding (LBW) and pulsed gas tungsten arc welding (GTAW). In this application, a change in process from pulsed LBW to pulsed gas tungsten arc welding was proposed to limit the possibility of weld solidification cracking since weldability diagrams developed for GTAW display a greater range of compositions that are not crack susceptible relative to those developed for pulsed LBW. Contrary to the predictions of the GTAW weldability diagram, cracking was found.This result was rationalized in terms of the more rapid solidification rate of the pulsed gas tungsten arc welds. In addition, for the pulsed LBW conditions, the material compositions were predicted to be, by themselves, 'weldable' according to the pulsed LBW weldability diagram. However, the composition range along the tie line connecting the two compositions passed through the crack susceptible range. Microstructurally, the primary solidification mode (PSM) of the material processed with higher power LBW was determined to be austenite (A), while solidification mode of the materials processed with lower power LBW apparently exhibited a dual PSM of both austenite (A) and ferrite-austenite (FA) within the same weld. The materials processed by pulsed GTAW showed mostly primary austenite solidification, with some regions of either primary austenite-second phase ferrite (AF) solidification or primary ferrite-second phase austenite (FA) solidification. This work demonstrates that variations in crack susceptibility may be realized when welding different heats of 'weldable' materials together, and that slight variations in processing can also contribute to crack susceptibility.

  11. Phase Behavior and Domain Size in Sphingomyelin-Containing Lipid Bilayers

    SciTech Connect (OSTI)

    Petruzielo, Robin S [Cornell University; Heberle, Frederick A [ORNL; Drazba, Paul [ORNL; Katsaras, John [ORNL; Feigenson, Gerald [Cornell University

    2013-01-01

    Membrane raft size measurements are crucial to understanding the stability and functionality of rafts in cells. The challenge of accurately measuring raft size is evidenced by the disparate reports of domain sizes, which range from nanometers to microns for the ternary model membrane system sphingomyelin (SM)/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/cholesterol (Chol). Using F rster resonance energy transfer (FRET) and differential scanning calorimetry (DSC), we established phase diagrams for porcine brain SM (bSM)/dioleoyl-sn-glycero-3-phosphocholine (DOPC)/Chol and bSM/POPC/Chol at 15 and 25 C. By combining two techniqueswith different spatial sensitivities, namely FRET and small-angle neutron scattering (SANS),we have significantly narrowed the uncertainty in domain size estimates for bSM/POPC/Chol mixtures. Compositional trends in FRET data revealed coexisting domains at 15 and 25 C for bothmixtures, while SANS measurements detected no domain formation for bSM/POPC/Chol. Together these results indicate that liquid domains in bSM/POPC/Chol are between 2 and 7 nmin radius at 25 C: that is, domains must be on the order of the 2 6 nmF rster distance of the FRET probes, but smaller than the ~7 nm minimum cluster size detectable with SANS. However, for palmitoyl SM (PSM)/POPC/Chol at a similar composition, SANS detected coexisting liquid domains. This increase in domain size upon replacing the natural SMcomponent (which consists of amixture of chain lengths) with synthetic PSM, suggests a role for SM chain length in modulating raft size in vivo.

  12. Students Recognized for Skill and Creativity in Energy Education...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Westminster), "The Squirrel Incident," first place; Garden School (New Castle), Car Number 36, second place; and West Middle School (Grand Junction), Car Number 69, third place. ...

  13. Solar and Lithium Ion Car Race Winners Announced - News Releases...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Castle Rock, "Sweet and Sassy," first place; Woodlands Academy, "Ghetto Gecko," second place; and Logan School, Denver, "Electric Engineers," third place. The "Sweet and Sassy" ...

  14. Effects of amines on formation of sub-3 nm particles and their subsequent growth

    SciTech Connect (OSTI)

    Yu H.; McGraw R.; Lee S.-H.

    2012-01-28

    Field observations and quantum chemical calculations suggest that amines can be important for formation of nanometer size particles. Amines and ammonia often have common atmospheric emission sources and the similar chemical and physical properties. While the effects of ammonia on aerosol nucleation have been previously investigated, laboratory studies of homogeneous nucleation involving amines are lacking. We have made kinetics studies of multicomponent nucleation (MCN) with sulfuric acid, water, ammonia and amines under conditions relevant to the atmosphere. Low concentrations of aerosol precursors were measured with chemical ionization mass spectrometers (CIMS) to provide constrained precursor concentrations needed for nucleation. Particle sizes larger than {approx}2 nm were measured with a nano-differential mobility analyzer (nano-DMA), and number concentrations of particles larger than {approx}1 nm were measured with a particle size magnifier (PSM). Our observations provide the laboratory evidence that amines indeed can participate in aerosol nucleation and growth at the molecular cluster level. The enhancement of particle number concentrations due to several atmospherically relevant amine compounds and ammonia were related to the basicity of these compounds, indicating that acid-base reactions may contribute to the formation of sub-3 nm particles.

  15. Office Of Environmental Management Major Contracts Awarded Since...

    Broader source: Energy.gov (indexed) [DOE]

    Small business set-aside No order placed 101710-101615 No order placed Safety and Ecology Corp. DE-EM0000836 Small business set-aside No order placed 101710-101615 No...

  16. Thomas Jefferson High School for Science & Technology Snaps Up...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beach Schools Take 2nd, 3rd Place High School Science Bowl 1st Place The Thomas Jefferson High School for Science and Technology team from Alexandria poses with its first-place...

  17. Palm City, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    place in Martin County, Florida.1 Registered Energy Companies in Palm City, Florida Sol Inc References US Census Bureau 2005 Place to 2006 CBSA Retrieved from "http:...

  18. Connecticut Clean Energy Fund | Open Energy Information

    Open Energy Info (EERE)

    Connecticut Clean Energy Fund Jump to: navigation, search Name: Connecticut Clean Energy Fund Address: 200 Corporate Place Place: Rocky Hill, Connecticut Zip: 06067 Region:...

  19. DOE-HDBK-1122-99; Radiological Control Technician Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... some instruments are portable to allow movement from place to place as deemed ... body areas which are prone to contamination are the buttocks, knees, and elbows and head. ...

  20. Guntersville Electric Board | Open Energy Information

    Open Energy Info (EERE)

    Board Place: Alabama Phone Number: (256) 582-5691 Website: www.guntersvilleelectric.comh Facebook: https:www.facebook.comsearch112844022062743places-in139386576124160...

  1. Tips: Sealing Air Leaks | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    electrical outlets, ceiling fixtures, attic hatches, and other places where air may leak. ... Use foam sealant on larger gaps around windows, baseboards, and other places where air may ...

  2. Niwot, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    place in Boulder County, Colorado.1 Registered Energy Companies in Niwot, Colorado Quantum Energy LLC References US Census Bureau 2005 Place to 2006 CBSA Retrieved from...

  3. Student Winners Announced in Solar, Hydrogen and Lithium Ion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Three lithium-ion design trophies based on technology, ... Schools, Greeley, "Battery 1," second place; and The ... Academy, "Tommy the Tesla," first place; Lincoln ...

  4. Boulder Wind Power | Open Energy Information

    Open Energy Info (EERE)

    Power Jump to: navigation, search Name: Boulder Wind Power Address: 2845 Wilderness Place Suite 201 Place: Boulder, CO Zip: 80301 Sector: Wind energy Website: www.boulderwindpower....

  5. Cetech America | Open Energy Information

    Open Energy Info (EERE)

    Cetech America Jump to: navigation, search Logo: Cetech America Name: Cetech America Address: 711 Silver Birch Place Place: Longwood, Florida Zip: 32750 Sector: Solar Year...

  6. HYDROCAP ENERGY SAS | Open Energy Information

    Open Energy Info (EERE)

    HYDROCAP ENERGY SAS Jump to: navigation, search Name: HYDROCAP ENERGY SAS Address: 65 Place Nicolas Copernic Technopole Brest Iroise Place: Plozane Zip: 29280 Region: France...

  7. Mithun | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Mithun Place: Seattle, Washington Zip: 981012913 Sector: Buildings Product: Focused on design of sustainable places, buildings and neighborhoods....

  8. Past Middle School National Science Bowl Winners (2002 - 2015...

    Office of Science (SC) Website

    First Place Team: Hopkins Junior High School, Fremont, California Team Members: Raghu ... First Place Team: Challenger School, Newark, California Team Members: Nikhil Desai, Rahul ...

  9. Categorical Exclusion 4565, Waste Management Construction Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and universal wastes); apply fabric and gravel to ground; transport equipment; transport materials; transport waste; remove vegetation; place barriers; place erosion controls;...

  10. International Air Transport Association (IATA) | Open Energy...

    Open Energy Info (EERE)

    Name: International Air Transport Association (IATA) Address: 800 Place Victoria PO Box 113 Place: Montreal, Quebec Phone Number: 1 514 874 0202 Website: www.iata.org...

  11. Harvest Solar | Open Energy Information

    Open Energy Info (EERE)

    Harvest Solar Energy Name: Harvest Solar Energy Address: 1571 East 22 Place Place: Tulsa, Oklahoma Zip: 74114 Sector: Solar Product: Renewable energy systems Phone Number:...

  12. Green Fuel Technologies Corporation | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Green Fuel Technologies Corporation Address: 29 Smith Place Place: Cambridge, Massachusetts Zip: 02138 Region: Greater Boston Area Sector:...

  13. Carlsbad employees fund veteran memorial

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    regional veterans by purchasing and placing their own remembrance. On November 12, a dedication ceremony will recognize newly placed memorials in the Park, including one from LANL...

  14. Nature-Inspired Nanotubes that Assemble Themselves, with Precision...

    Office of Science (SC) Website

    Scientists discovered a family of nature-inspired materials that, when placed in water, ... Scientists discovered a family of nature-inspired polymers that, when placed in water, ...

  15. Northern States Metals Company | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Northern States Metals Company Address: 3207 Innovation Place Place: Youngstown, Ohio Zip: 44509 Sector: Solar Product: Manufacturing Phone...

  16. Pfhotonika | Open Energy Information

    Open Energy Info (EERE)

    Pfhotonika Address: 9149 N. 109th Place Place: Scottsdale, Arizona Zip: 85259 Sector: Hydrogen Product: Pfhotonika Number of Employees: 1-10 Year Founded: 2002 Phone Number:...

  17. Stone Ridge, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    place in Ulster County, New York.1 Registered Energy Companies in Stone Ridge, New York Prism Solar Technologies Inc References US Census Bureau 2005 Place to 2006...

  18. Microsoft Word - DE-AC06-09RL15009 Section F.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of this Contract shall commence on October 1, 2009 and continue through September 30, 2011. F.2 Principal Place of Performance The principal place of performance of this...

  19. Apartment Hunting with an Eye to Energy Savings: Part I

    Broader source: Energy.gov [DOE]

    Apartment hunting can be a long and stressful process. Finding that right place is difficult, let alone finding the right place with the right price.

  20. Structural study of Ni- or Mg-based complexes incorporated within UiO-66-NH{sub 2} framework and their impact on hydrogen sorption properties

    SciTech Connect (OSTI)

    Žunkovič, E.; Mazaj, M.; Mali, G.; Rangus, M.; Devic, T.; Serre, C.; Logar, N. Zabukovec

    2015-05-15

    Nickel and magnesium acetylacetonate molecular complexes were post-synthetically incorporated into microporous zirconium-based MOF (UiO-66-NH{sub 2}) in order to introduce active open-metal sites for hydrogen sorption. Elemental analysis, nitrogen physisorption and DFT calculations revealed that 5 molecules of Ni(acac){sub 2} or 2 molecules of Mg(acac){sub 2} were incorporated into one unit cell of UiO-66-NH{sub 2}. {sup 1}H–{sup 13}C CPMAS and {sup 1}H MAS NMR spectroscopy showed that, although embedded within the pores, both Ni- and Mg-complexes interacted with the UiO-66-NH{sub 2} framework only through weak van der Waals bonds. Inclusion of metal complexes led to the decrease of hydrogen sorption capacities in Ni-modified as well as in Mg-modified samples in comparison with the parent UiO-66-NH{sub 2}. The isosteric hydrogen adsorption enthalpy slightly increased in the case of Ni-modified material, but not in the case of Mg-modified analogue. - Graphical abstract: A post-synthesis impregnation of Mg- and Ni-acetylacetonate complexes performed on zirconium-based MOF UiO-66-NH{sub 2} does influence the hydrogen sorption performance with respect to the parent matrix. The structural study revealed that Mg- and Ni-acetylacetonate molecules interact with zirconium-terephthalate framework only by weak interactions and they are not covalently bonded to aminoterephthalate ligand. Still, they remain confined into the pores even after hydrogen sorption experiments. - Highlights: • Mg- and Ni-acetylacetonate molecules embedded in the pores of UiO-66-NH{sub 2} by PSM. • Molecules of complexes interact with framework only by van der Waals interactions. • Type/structure of deposited metal-complex impact hydrogen enthalpy of adsorption.

  1. Thermoelectric and microstructural properties of Pb{sub 0.9-x}Sn{sub 0.1}Ge{sub x}Te compounds prepared by spinodal decomposition

    SciTech Connect (OSTI)

    Sondergaard, M.; Christensen, M.; Johnsen, S. [Center for Energy Materials, Department of Chemistry and iNANO, Aarhus University, DK-8000 Aarhus C (Denmark); Stiewe, C.; Dasgupta, T.; Mueller, E. [German Aerospace Center (DLR), Linder Hoehe, DE-51147 Cologne (Germany); Iversen, B.B., E-mail: bo@chem.au.d [Center for Energy Materials, Department of Chemistry and iNANO, Aarhus University, DK-8000 Aarhus C (Denmark)

    2011-05-15

    Three samples of Pb{sub 0.9-x}Sn{sub 0.1}Ge{sub x}Te with x=0.25, 0.35, 0.6 were prepared by heating the mixtures above the melting point of the constituent elements followed by quenching in water. The x=0.6 sample is close to the center of the immiscibility region, while the x=0.25 and 0.35 samples are in the Pb rich region inside the spinodal miscibility gap. Microstructural investigations using Powder X-ray Diffraction, Scanning Electron Microscopy and Energy Dispersive X-ray Spectroscopy revealed both GeTe-rich and PbTe-rich phases. The samples were uniaxially hot pressed and the thermoelectric properties were characterized in the temperature range 2-400 K using a commercial apparatus and from 300 to 650 K with a custom designed setup. The best sample (x=0.6) reached zT{approx}0.6 at 650 K, while the x=0.25 and 0.35 samples showed thermal instability at elevated temperatures. -- Graphical abstract: Spinodal decomposition in the GeTe-SnTe-PbTe system demonstrated by SEM and EXS images. Display Omitted Highlights: {yields} Investigation of Pb-rich part of the spinodal miscibility gap in PbTe-SnTe-GeTe. {yields} zT=0.6 at 650 K reproduced for Pb{sub 0.3}Sn{sub 0.1}Ge{sub 0.6}Te. {yields} Pb-rich phases shown to be thermally instable. {yields} Thermoelectric property characterization at low and high temperature. {yields} Microstructural investigations using PXRD, SEM, EDX and PSM.

  2. Implementation of the Clean Air Act, Title III, Section 112(r) Prevention of Accidental Release Rule requirements at U.S. DOE Oak Ridge Reservation facilities

    SciTech Connect (OSTI)

    Humphreys, M.P. [Dept. of Energy Oak Ridge Operations Office, TN (United States). Environmental Protection Div.; Fellers, H.L. [Lockheed-Martin Energy Systems K-25 Site, Oak Ridge, TN (United States)

    1997-12-31

    Title III, Section 112(r) of the Clean Air Act (CAA) Amendments of 1990 requires the Environmental Protection Agency (EPA) to promulgate regulations to prevent accidental releases of regulated substances and to reduce the severity of those releases that do occur. The final EPA rule for Risk Management Programs under Section 112(r)(7) of the CAA, promulgated June 20, 1996, applies to all stationary sources with processes that contain more than a threshold quantity of any of 139 regulated substances listed under 40 CFR 68.130. All affected sources will be required to prepare a risk management plan which must be submitted to EPA and be made available to state and local governments and to the public. This paper will provide details of initiatives underway at US Department of Energy (DOE) Oak Ridge Reservation (ORR) Facilities for implementation of the Prevention of Accidental Release Rule. The ORR encompasses three DOE Facilities: the Y-12 Plant, Oak Ridge National Laboratory (ORNL), and the K-25 Site. The Y-12 Plant manufactures component parts for the national nuclear weapons program; the ORNL is responsible for research and development activities including nuclear engineering, engineering technologies, and the environmental sciences; and the K-25 Site conducts a variety of research and development activities and is the home of a mixed waste incinerator. ORR activities underway and soon to be undertaken toward implementation of the Prevention of Accidental Release Rule include: compilation of inventories of regulated substances at all processes at each of the three ORR Facilities for determination of affected processes and facilities; plans for inventory reduction to levels below threshold quantities, where necessary and feasible; determination of the overlap of processes subject to the OSHA PSM Standard and determination of parallel requirements; preparation of Risk Management Plans and Programs for affected processes and facilities including detailed requirements

  3. Thomas Jefferson High School for Science & Technology Snaps Up Virginia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Bowl Championship; Virginia Beach Schools Take 2nd, 3rd Place | Jefferson Lab Snaps Up Virginia Science Bowl Championship; Virginia Beach Schools Take 2nd, 3rd Place Thomas Jefferson High School for Science & Technology Snaps Up Virginia Science Bowl Championship; Virginia Beach Schools Take 2nd, 3rd Place High School Science Bowl 1st Place The Thomas Jefferson High School for Science and Technology team from Alexandria poses with its first-place trophy after the competition.

  4. Letter: RCRA Compliance for Containerized Chemicals. IR-500-505-1.03. In carrying out the Containerized Chemical Interim Response Action, there is a disconnect between the requirements of RCRA and what we consider the best conduct of operations for expediting secure storage of chemicals. The sequence of activities is to move chemicals as quickly as possible. To do this, DOE moves the material into the RCRA storage area, then a detailed chemical analysis is done. Regulations require that the detailed analysis be performed prior to placing the material in the RCRA storage area. There is a period of time that we in non-compliance. DOE believes that the approach taken is perferable to leaving chemical in an "as is" condition until detailed analysis is performed. Letter solicits concurrence.

    Office of Legacy Management (LM)

  5. Triangle Universities Nuclear Laboratory : 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    will take place in March 2016. Experiments which are approved by the PAC will be placed in a queue and will be scheduled for beam time as early as spring of 2016. Beams...

  6. US ITER | Media Corner

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Division Management in Place at US ITER New Division Management in Place at US ITER Published September 20, 2011 After an extensive international search, US ITER selected John ...

  7. Jack Deslippe Joins NERSC User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    there. "Of all the places I've lived, the Bay Area is by far my favorite place to be. The food alone would make my case, but I also love being surrounded by such a diverse...

  8. Rio en Medio, New Mexico: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Rio en Medio is a census-designated place in Santa Fe County, New Mexico.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  9. San Ildefonso Pueblo, New Mexico: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    help OpenEI by expanding it. San Ildefonso Pueblo is a census-designated place in Santa Fe County, New Mexico.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  10. Fish Biologist

    Office of Energy Efficiency and Renewable Energy (EERE)

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  11. Electrical Engineer

    Broader source: Energy.gov [DOE]

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  12. Energy Industry Analyst

    Broader source: Energy.gov [DOE]

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  13. Well Placement Decision Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Well Placement Decision Process Well Placement Decision Process Determining where to place a well is a multi-step process. August 1, 2013 Investigation process for determining where to place a sentinel well Investigation process for determining where

  14. Biodiesel Filling Stations UK | Open Energy Information

    Open Energy Info (EERE)

    Filling Stations UK Jump to: navigation, search Name: Biodiesel Filling Stations UK Place: United Kingdom Product: A website providing a list of places in the UK where people can...

  15. NETL Emergency Preparedness and Contact Information by Location

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a shelter-in-place or evacuation instructions. Shelter-in-place means that you should stay in your home, shut all the windows and doors, and shut off any fans that bring air in...

  16. WIPP Mine Rescue Team Wins, Retires Trophy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    third. Kevin Cummins of IMC-Kalium won first place in the benchman's competition. Joe Baca of the WIPP Blue Team won second place. Mine Rescue teams have been participating in...

  17. USAJobs Search | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of dedicated professionals here at the Federal Energy...

  18. South Middletown, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. South Middletown is a census-designated place in Butler County, Ohio.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  19. Ross, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Ross is a census-designated place in Butler County, Ohio.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  20. Beckett Ridge, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Beckett Ridge is a census-designated place in Butler County, Ohio.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  1. Wetherington, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Wetherington is a census-designated place in Butler County, Ohio.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  2. Olde West Chester, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Olde West Chester is a census-designated place in Butler County, Ohio.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  3. Seven Lakes, North Carolina: Energy Resources | Open Energy Informatio...

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Seven Lakes is a census-designated place in Moore County, North Carolina.1 References US Census Bureau 2005 Place to 2006 CBSA...

  4. IT Specialist

    Broader source: Energy.gov [DOE]

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  5. Tonopah Test Range Summary of Corrective Action Units

    SciTech Connect (OSTI)

    Ronald B. Jackson

    2007-05-01

    Corrective Action Sites (CASs) and Corrective Action Units (CAUs) at the Tonopah Test Range (TTR) may be placed into three categories: Clean Closure/No Further Action, Closure in Place, or Closure in Progress.

  6. Homestead Meadows North, Texas: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    help OpenEI by expanding it. Homestead Meadows North is a census-designated place in El Paso County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  7. Butterfield, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Butterfield is a census-designated place in El Paso County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  8. Westway, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Westway is a census-designated place in El Paso County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  9. Fort Bliss, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Fort Bliss is a census-designated place in El Paso County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  10. Sparks, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Sparks is a census-designated place in El Paso County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  11. San Elizario, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. San Elizario is a census-designated place in El Paso County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  12. Prado Verde, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Prado Verde is a census-designated place in El Paso County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  13. Canutillo, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Canutillo is a census-designated place in El Paso County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  14. Fabens, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Fabens is a census-designated place in El Paso County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  15. Homestead Meadows South, Texas: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    help OpenEI by expanding it. Homestead Meadows South is a census-designated place in El Paso County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  16. Solar Data Hub (Presentation)

    SciTech Connect (OSTI)

    Orwig, K.

    2011-04-01

    As power grid integration of renewables becomes ever more important and detailed, the need for a centralized place for solar-related resource data is needed. This presentation describes such a place and website.

  17. Solar lighting | Open Energy Information

    Open Energy Info (EERE)

    only need to place the lights in a sunny location. Others have the lights separate from a solar cell panel. Only the panel needs to be placed in a sunny location. Units vary in...

  18. Four Corners, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a census-designated place in Lake County and Orange County and Osceola County and Polk County, Florida.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  19. Saylorville, Iowa: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Saylorville is a census-designated place in Polk County, Iowa.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved from...

  20. Quarterly Nuclear Deployment Scorecard - April 2015 | Department...

    Office of Environmental Management (EM)

    ... Containment vessel lower ring has been set in place. Unit 4: Major construction activities continue, CH80 turbine module has been set in place. Fabrication and testing of steam ...

  1. Clearwater, South Carolina: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Clearwater is a census-designated place in Aiken County, South Carolina.1 References US Census Bureau 2005 Place to 2006 CBSA...

  2. Belvedere, South Carolina: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Belvedere is a census-designated place in Aiken County, South Carolina.1 References US Census Bureau 2005 Place to 2006 CBSA...

  3. Gloverville, South Carolina: Energy Resources | Open Energy Informatio...

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Gloverville is a census-designated place in Aiken County, South Carolina.1 References US Census Bureau 2005 Place to 2006 CBSA...

  4. New City, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    place in Rockland County, New York.1 Registered Energy Companies in New City, New York ISI Solar References US Census Bureau 2005 Place to 2006 CBSA Retrieved from "http:...

  5. IT Specialist (INFOSEC)- Direct Hire Authority

    Broader source: Energy.gov [DOE]

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  6. Travel Management Specialist

    Broader source: Energy.gov [DOE]

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  7. Records and Information Management Specialist

    Broader source: Energy.gov [DOE]

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  8. Accountant (Litigation)

    Broader source: Energy.gov [DOE]

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  9. Energy Industry Analyst (IT)

    Broader source: Energy.gov [DOE]

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  10. Economist (Litigation)

    Broader source: Energy.gov [DOE]

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  11. High Explosives Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 1, 2013 The design and testing for "Little Boy" took place at Gun Site The design and testing for "Little Boy" took place at Gun Site. RELATED IMAGES http:...

  12. Supervisory Civil Engineer or Supervisory Geologist (Branch Chief)

    Broader source: Energy.gov [DOE]

    If you are ready to begin your new career or are looking for a place to make an impact, what better place than a top 5 agency? We are looking for the best and brightest to join our team of...

  13. Drexel, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Drexel is a census-designated place in Montgomery County, Ohio.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  14. Penn Wynne, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Penn Wynne is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  15. South Kensington, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    can help OpenEI by expanding it. South Kensington is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  16. Woodbourne-Hyde Park, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    help OpenEI by expanding it. Woodbourne-Hyde Park is a census-designated place in Montgomery County, Ohio.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  17. East Norriton, Pennsylvania: Energy Resources | Open Energy Informatio...

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. East Norriton is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  18. Friendship Village, Maryland: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    can help OpenEI by expanding it. Friendship Village is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  19. North Kensington, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    can help OpenEI by expanding it. North Kensington is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  20. Fairland, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Fairland is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  1. Spring Mount, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Spring Mount is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  2. Evansburg, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Evansburg is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  3. Montgomeryville, Pennsylvania: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Montgomeryville is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  4. Ashton-Sandy Spring, Maryland: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    can help OpenEI by expanding it. Ashton-Sandy Spring is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  5. Travilah, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Travilah is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  6. Kulpsville, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Kulpsville is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  7. Wyncote, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Wyncote is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  8. Willow Grove, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Willow Grove is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  9. Porter Heights, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Porter Heights is a census-designated place in Montgomery County, Texas.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  10. Stowe, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Stowe is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  11. Redland, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Redland is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  12. Cloverly, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Cloverly is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  13. Horsham, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Horsham is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  14. Ardmore, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    OpenEI by expanding it. Ardmore is a census-designated place in Delaware County and Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  15. Burtonsville, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Burtonsville is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  16. Oreland, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Oreland is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  17. Sanatoga, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Sanatoga is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  18. Maple Glen, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Maple Glen is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  19. Rossmoor, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Rossmoor is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  20. Flourtown, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Flourtown is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  1. Fort McKinley, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Fort McKinley is a census-designated place in Montgomery County, Ohio.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  2. Northridge, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Northridge is a census-designated place in Montgomery County, Ohio.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  3. Eagleville, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Eagleville is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  4. Cabin John, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Cabin John is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  5. Forest Glen, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Forest Glen is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  6. North Potomac, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. North Potomac is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  7. Kemp Mill, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Kemp Mill is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  8. Wyndmoor, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Wyndmoor is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  9. Skippack, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Skippack is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  10. Clarksburg, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Clarksburg is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  11. Halfway House, Pennsylvania: Energy Resources | Open Energy Informatio...

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Halfway House is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  12. Wright-Patterson AFB, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    expanding it. Wright-Patterson AFB is a census-designated place in Greene County and Montgomery County, Ohio.1 References US Census Bureau 2005 Place to 2006 CBSA Retrieved...

  13. Wheaton-Glenmont, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    can help OpenEI by expanding it. Wheaton-Glenmont is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  14. Spring House, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Spring House is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  15. Olney, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Olney is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  16. North Bethesda, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. North Bethesda is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  17. Damascus, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Damascus is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...

  18. Gilbertsville, Pennsylvania: Energy Resources | Open Energy Informatio...

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Gilbertsville is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  19. Audubon, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    a stub. You can help OpenEI by expanding it. Audubon is a census-designated place in Montgomery County, Pennsylvania.1 References US Census Bureau 2005 Place to 2006 CBSA...

  20. Colesville, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. Colesville is a census-designated place in Montgomery County, Maryland.1 References US Census Bureau 2005 Place to 2006 CBSA...