Powered by Deep Web Technologies
Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

From data to analysis: linking NWChem and Avogadro with the syntax and semantics of Chemical Markup Language  

SciTech Connect (OSTI)

Background Multidisciplinary integrated research requires the ability to couple the diverse sets of data obtained from a range of complex experiments and computer simulations. Integrating data requires semantically rich information. In this paper the generation of semantically rich data from the NWChem computational chemistry software is discussed within the Chemical Markup Language (CML) framework. Results The NWChem computational chemistry software has been modified and coupled to the FoX library to write CML compliant XML data files. The FoX library was expanded to represent the lexical input files used by the computational chemistry software. Conclusions The production of CML compliant XML files for the computational chemistry software NWChem can be relatively easily accomplished using the FoX library. A unified computational chemistry or CompChem convention and dictionary needs to be developed through a community-based effort. The long-term goal is to enable a researcher to do Google-style chemistry and physics searches.

De Jong, Wibe A.; Walker, Andrew M.; Hanwell, Marcus D.

2013-05-24T23:59:59.000Z

2

agent markup language: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Web Markup Languages Definitions and examples Computer Technologies and Information...

3

GLYDE-II and Lignin: An XML markup language for representing lignin structures  

E-Print Network [OSTI]

in secondary plant cell walls are of particular interest for alternative fuel. However, another complex Miller2, Krys Kochut2, Will York1,3 1. Complex Carbohydrate Research Center. Athens, Georgia, 30605 2. University of Georgia. Athens, Georgia, 30601 Introduction GLYDE-II (GLYcan structural Data Exchange using

Miller, John A.

4

Trade liberalisation and the impact of regional trade flows on the mark-ups in South African manufacturing industries.  

E-Print Network [OSTI]

??Since the mid-1990s South Africa has made considerable progress in opening up its trade regime.This study presents estimates of average mark-ups for the manufacturing industriesÖ (more)

Van de Winkel, Tijl

2005-01-01T23:59:59.000Z

5

Standard generalized markup language: A guide for transmitting encoded bibliographic records  

SciTech Connect (OSTI)

This document provides the guidance necessary to transmit to DOE`s Office of Scientific and Technical Information (OSTI) an encoded bibliographic record that conforms to International Standard ISO 8879, Information Processing -- Text and office systems -- Standard Generalized Markup Language (SGML). Included in this document are element and attribute tag definitions, sample bibliographic records, the bibliographic document type definition, and instructions on how to transmit a bibliographic record electronically to OSTI.

Not Available

1994-09-01T23:59:59.000Z

6

Department Safety Representatives Department Safety Representative  

E-Print Network [OSTI]

Department Safety Representatives Overview Department Safety Representative Program/Operations Guidance Document The Department Safety Representative (DSR) serves a very important role with implementation of safety, health, and environmental programs on campus. The role of the DSR is to assist

Pawlowski, Wojtek

7

Representative Doses to Members of the Public from Atmospheric Releases of 131I at the Mayak Production Association Facilities from 1948 through 1972  

SciTech Connect (OSTI)

Scoping epidemiologic studies performed by researchers from the Southern Urals Biophysics Institute revealed an excess prevalence of thyroid nodules and an increased incidence of thyroid cancer among residents of Ozersk, Russia, who were born in the early 1950s. Ozersk is located about 5 km from the facilities where the Mayak Production Association produced nuclear materials for the Russian weapons program. Reactor operations began in June 1948 and chemical separation of plutonium from irradiated fuel began in February 1949. The U.S.ĖRussia Joint Coordinating Committee on Radiation Effects Research conducted a series of projects over a 10-year period to assess the radiation risks in the Southern Urals. This paper uses data collected under Committee projects to reconstruct individual time-dependent thyroid doses to reference individuals living in Ozersk from 131I released to the atmosphere. Between 3.22◊1016 and 4.31◊1016 Bq of 131I released may have been released during the 1948Ė1972 time period, and a best estimate is 3.76◊1016 Bq. A child born in 1947 is estimated to have received a cumulative thyroid dose of 2.3 Gy for 1948Ė1972, with a 95% confidence interval of 0.51Ė7.3 Gy. Annual doses were the highest in 1949 and a child who was 5 years old in 1949 is estimated to have a received an annual thyroid dose of 0.93 Gy with a 95% confidence interval of 0.19Ė3.5 Gy.

Eslinger, Paul W.; Napier, Bruce A.; Anspaugh, Lynn R.

2014-04-03T23:59:59.000Z

8

Wave represents displacement Wave represents pressure Source -Sound Waves  

E-Print Network [OSTI]

Wave represents displacement Wave represents pressure Source - Sound Waves Distance between crests is wavelength Number of crests passing a point in 1 second is frequency Wave represents pressure Target - Radio Waves Distance between crests is wavelength Number of crests passing a point in 1 second is frequency

Colorado at Boulder, University of

9

US defensive operations against Libya and the nuclear accident at Chernobyl. Markup before the Committee on Foreign Affairs, House of Representatives, Ninety-Ninth Congress, Second Session on H. Res. 424 and H. Res 440, May 1, 1986  

SciTech Connect (OSTI)

The House Foreign Affairs Committee met to mark up two resolutions: H. Res. 424 and H. Res. 440. H. Res. 424 thanks the United Kingdom for its assistance in the April 14, 1986 operation against Libya. Despite objections to the raid and to including the British, as well as questions about the quality of the US response and about the President's compliance with the Constitution and the War Powers Resolution, the resolution passed. H. Res. 440 expresses sympathy to the victims of the Chernobyl accident and asks the Soviet Union to relax restrictions on communications and the transfer of whatever technology and assistance will be helpful. It also criticizes the Soviet handling of information about the accident. An amendment strengthened the wording of the criticism, and the resolution passed. The report includes the committee discussion and the tests of the two resolutions.

Not Available

1986-01-01T23:59:59.000Z

10

BACHELOR THESIS The High Representative  

E-Print Network [OSTI]

BACHELOR THESIS The High Representative and the Libya Crisis An Assessment Dominique Prescher 8 and the Libya Crisis 2 Table of Content 1. Summary 4 2. Introduction 4 3. Theoretical Framework 8 3.1 Neo 34 9. Bibliography 36 #12;Bachelor Thesis The High Representative and the Libya Crisis 3 List

Vellekoop, Michel

11

Representative Albert R. Public Policy  

E-Print Network [OSTI]

billion to the authorization for the Low-Income Home Energy Assistance Program. He also successfully years as a member of the U.S. House of Representatives, representing Maryland's 4th Congressional District. During the last 12 years, he served on the powerful House Energy and Commerce Committee, most

Sibille, Etienne

12

H. R. 4847: a bill to require that United States companies cease their participation in the production, marketing, or distribution of Libyan oil. Introduced in the House of Representatives, Ninety-Ninth Congress, Second Session, May 19, 1986  

SciTech Connect (OSTI)

This bill requiring all US companies to discontinue any participation in the production, marketing, or distribution of Libyan oil revokes all previous authority for such activity. The Act would become effective on June 30, 1986 or 30 days after enactment.

Not Available

1986-01-01T23:59:59.000Z

13

Production  

Broader source: Energy.gov [DOE]

Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of...

14

Yucca Mountain Climate Technical Support Representative  

SciTech Connect (OSTI)

The primary objective of Project Activity ORD-FY04-012, ďYucca Mountain Climate Technical Support Representative,Ē was to provide the Office of Civilian Radioactive Waste Management (OCRWM) with expertise on past, present, and future climate scenarios and to support the technical elements of the Yucca Mountain Project (YMP) climate program. The Climate Technical Support Representative was to explain, defend, and interpret the YMP climate program to the various audiences during Site Recommendation and License Application. This technical support representative was to support DOE management in the preparation and review of documents, and to participate in comment response for the Final Environmental Impact Statement, the Site Recommendation Hearings, the NRC Sufficiency Comments, and other forums as designated by DOE management. Because the activity was terminated 12 months early and experience a 27% reduction in budget, it was not possible to complete all components of the tasks as originally envisioned. Activities not completed include the qualification of climate datasets and the production of a qualified technical report. The following final report is an unqualified summary of the activities that were completed given the reduced time and funding.

Sharpe, Saxon E

2007-10-23T23:59:59.000Z

15

Production  

Broader source: Energy.gov [DOE]

Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of cultivation systems.

16

General Engineer / Physical Scientist (Facility Representative)  

Broader source: Energy.gov [DOE]

Facility Representatives (FRs) are line management's on-site technical representative with responsibility for identifying and evaluating environmental, safety and health issues and concerns,...

17

Statistically Equivalent Representative Volume Elements for Unidirectional  

E-Print Network [OSTI]

Statistically Equivalent Representative Volume Elements for Unidirectional Composite the statistically equivalent representative volume element (SERVE) are proposed for fiber-reinforced microstructures using a bilinear cohesive zone law. As introduced in the first article, a combination of statistical

Ghosh, Somnath

18

A Capital Market Test of Representativeness  

E-Print Network [OSTI]

A CAPITAL MARKET TEST OF REPRESENTATIVENESS A Dissertation by MOHAMMAD URFAN SAFDAR Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR... OF PHILOSOPHY May 2012 Major Subject: Accounting A Capital Market Test of Representativeness Copyright 2012 Mohammad Urfan Safdar A CAPITAL MARKET TEST OF REPRESENTATIVENESS A Dissertation...

Safdar, Mohammad

2012-07-16T23:59:59.000Z

19

Facility Representative Program, Criteria & Review Approach Documents  

Broader source: Energy.gov [DOE]

This page provides Criteria Review and Approach Documents (CRADS) to assist Facility Representatives. Please submit your CRADS for posting by sending them to the HQ FR Program Manager. Please include the subject, date, and a contact person.

20

An Introduction to Venture Capital Granite representatives  

E-Print Network [OSTI]

May 2006 An Introduction to Venture Capital #12;2 Granite representatives Sam Kingsland ­ Managing;3 Introduction to Granite Ventures Founded in 1992 Granite has 9 investment professionals Over $1B under

Anderson, Richard

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

General Engineer/Physical Scientist (Facility Representative)  

Broader source: Energy.gov [DOE]

A successful candidate in this position will serve as an on-site technical representative to identify and evaluate environmental, safety, and health issues and concerns; as well as diagnose root...

22

Production of Biodiesels from Multiple Feedstocks and  

E-Print Network [OSTI]

, product, or process disclosed, or represents that its use would not infringe privately owned rights

J. A. Kinast; J. A. Kinast; Nrel Technical; Monitor K. S. Tyson; Prepared Subcontract; No. Acg

2003-01-01T23:59:59.000Z

23

An iconic approach to representing climate change  

E-Print Network [OSTI]

1 An iconic approach to representing climate change Saffron Jessica O'Neill A thesis submitted-experts to be meaningfully engaged with the issue of climate change. This thesis investigates the value of engaging non-experts with climate change at the individual level. Research demonstrates that individuals perceive climate change

Feigon, Brooke

24

FOOD SECURITY FUEL INDEPENDENCE These projects represent  

E-Print Network [OSTI]

FOOD SECURITY FUEL INDEPENDENCE These projects represent a huge effort to determine and improve pressing challenges. ASH 1% ASH 1% ASH 1% OTHERS 6% OTHERS 6% OTHERS 6% OIL 2% OIL 10% OIL 20% SUCROSE 45% LIPID CANE Produce and store oil in the stem in place of sugar During photosynthesis, sugarcane

Bashir, Rashid

25

The Simplicity Device: Your Personal Mobile Representative  

E-Print Network [OSTI]

The Simplicity Device: Your Personal Mobile Representative Giovanni Bartolomeo1, Francesca Martire1 mobile phone that stores and handles personal information about the user. The Simplicity Device can be connected (e.g. via Bluetooth) to several other devices thus allowing personalization of services

26

Defining And Characterizing Sample Representativeness For DWPF Melter Feed Samples  

SciTech Connect (OSTI)

Representative sampling is important throughout the Defense Waste Processing Facility (DWPF) process, and the demonstrated success of the DWPF process to achieve glass product quality over the past two decades is a direct result of the quality of information obtained from the process. The objective of this report was to present sampling methods that the Savannah River Site (SRS) used to qualify waste being dispositioned at the DWPF. The goal was to emphasize the methodology, not a list of outcomes from those studies. This methodology includes proven methods for taking representative samples, the use of controlled analytical methods, and data interpretation and reporting that considers the uncertainty of all error sources. Numerous sampling studies were conducted during the development of the DWPF process and still continue to be performed in order to evaluate options for process improvement. Study designs were based on use of statistical tools applicable to the determination of uncertainties associated with the data needs. Successful designs are apt to be repeated, so this report chose only to include prototypic case studies that typify the characteristics of frequently used designs. Case studies have been presented for studying in-tank homogeneity, evaluating the suitability of sampler systems, determining factors that affect mixing and sampling, comparing the final waste glass product chemical composition and durability to that of the glass pour stream sample and other samples from process vessels, and assessing the uniformity of the chemical composition in the waste glass product. Many of these studies efficiently addressed more than one of these areas of concern associated with demonstrating sample representativeness and provide examples of statistical tools in use for DWPF. The time when many of these designs were implemented was in an age when the sampling ideas of Pierre Gy were not as widespread as they are today. Nonetheless, the engineers and statisticians used carefully thought out designs that systematically and economically provided plans for data collection from the DWPF process. Key shared features of the sampling designs used at DWPF and the Gy sampling methodology were the specification of a standard for sample representativeness, an investigation that produced data from the process to study the sampling function, and a decision framework used to assess whether the specification was met based on the data. Without going into detail with regard to the seven errors identified by Pierre Gy, as excellent summaries are readily available such as Pitard [1989] and Smith [2001], SRS engineers understood, for example, that samplers can be biased (Gy?s extraction error), and developed plans to mitigate those biases. Experiments that compared installed samplers with more representative samples obtained directly from the tank may not have resulted in systematically partitioning sampling errors into the now well-known error categories of Gy, but did provide overall information on the suitability of sampling systems. Most of the designs in this report are related to the DWPF vessels, not the large SRS Tank Farm tanks. Samples from the DWPF Slurry Mix Evaporator (SME), which contains the feed to the DWPF melter, are characterized using standardized analytical methods with known uncertainty. The analytical error is combined with the established error from sampling and processing in DWPF to determine the melter feed composition. This composition is used with the known uncertainty of the models in the Product Composition Control System (PCCS) to ensure that the wasteform that is produced is comfortably within the acceptable processing and product performance region. Having the advantage of many years of processing that meets the waste glass product acceptance criteria, the DWPF process has provided a considerable amount of data about itself in addition to the data from many special studies. Demonstrating representative sampling directly from the large Tank Farm tanks is a difficult, if not unsolvable enterprise due to li

Shine, E. P.; Poirier, M. R.

2013-10-29T23:59:59.000Z

27

Data structures and apparatuses for representing knowledge  

DOE Patents [OSTI]

Data structures and apparatuses to represent knowledge are disclosed. The processes can comprise labeling elements in a knowledge signature according to concepts in an ontology and populating the elements with confidence values. The data structures can comprise knowledge signatures stored on computer-readable media. The knowledge signatures comprise a matrix structure having elements labeled according to concepts in an ontology, wherein the value of the element represents a confidence that the concept is present in an information space. The apparatus can comprise a knowledge representation unit having at least one ontology stored on a computer-readable medium, at least one data-receiving device, and a processor configured to generate knowledge signatures by comparing datasets obtained by the data-receiving devices to the ontologies.

Hohimer, Ryan E; Thomson, Judi R; Harvey, William J; Paulson, Patrick R; Whiting, Mark A; Tratz, Stephen C; Chappell, Alan R; Butner, Robert S

2014-02-18T23:59:59.000Z

28

Network Markup Language Base Schema version 1  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohn Cyber SecurityAlamos NationalNeil Network

29

"Optimum production--investment controls for the representative shrimp production firm.  

E-Print Network [OSTI]

in determining the level at which the species can maintain itself. The shrimp fishery is the nation's most valuable, and one of few which has shown expansion in recent years-, the value of landings in the industry as a whole showing a slight decline... largely due to expansion of the shrimp industry that the Gulf Coast's relative position to other areas, in both volume and value, has lately increased. 22 V. TWO MODELS FOR THE SHRIMP FISHERY In this section, two models, for the shrimp fishery...

Greene, Leon James

1969-01-01T23:59:59.000Z

30

Representing the vacuum polarization on de Sitter  

SciTech Connect (OSTI)

Previous studies of the vacuum polarization on de Sitter have demonstrated that there is a simple, noncovariant representation of it in which the physics is transparent. There is also a cumbersome, covariant representation in which the physics is obscure. Despite being unwieldy, the latter form has a powerful appeal for those who are concerned about de Sitter invariance. We show that nothing is lost by employing the simple, noncovariant representation because there is a closed form procedure for converting its structure functions to those of the covariant representation. We also present a vastly improved technique for reading off the noncovariant structure functions from the primitive diagrams. And we discuss the issue of representing the vacuum polarization for a general metric background.

Leonard, Katie E.; Woodard, Richard P. [Department of Physics, University of Florida, Gainesville, Florida 32611 (United States)] [Department of Physics, University of Florida, Gainesville, Florida 32611 (United States); Prokopec, Tomislav [Institute of Theoretical Physics (ITP) and Spinoza Institute, Utrecht University, Postbus 80195, 3508 TD Utrecht (Netherlands)] [Institute of Theoretical Physics (ITP) and Spinoza Institute, Utrecht University, Postbus 80195, 3508 TD Utrecht (Netherlands)

2013-03-15T23:59:59.000Z

31

3Q CY2005 (PDF), Facility Representative Program Performance...  

Office of Environmental Management (EM)

3Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report 3Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report...

32

DOE Honors WIPP Representative for Cutting Travel Costs, Greenhouse...  

Energy Savers [EERE]

DOE Honors WIPP Representative for Cutting Travel Costs, Greenhouse Gas Emissions DOE Honors WIPP Representative for Cutting Travel Costs, Greenhouse Gas Emissions June 29, 2012 -...

33

Representative Atmospheric Plume Development for Elevated Releases  

SciTech Connect (OSTI)

An atmospheric explosion of a low-yield nuclear device will produce a large number of radioactive isotopes, some of which can be measured with airborne detection systems. However, properly equipped aircraft may not arrive in the region where an explosion occurred for a number of hours after the event. Atmospheric conditions will have caused the radioactive plume to move and diffuse before the aircraft arrives. The science behind predicting atmospheric plume movement has advanced enough that the location of the maximum concentrations in the plume can be determined reasonably accurately in real time, or near real time. Given the assumption that an aircraft can follow a plume, this study addresses the amount of atmospheric dilution expected to occur in a representative plume as a function of time past the release event. The approach models atmospheric transport of hypothetical releases from a single location for every day in a year using the publically available HYSPLIT code. The effective dilution factors for the point of maximum concentration in an elevated plume based on a release of a non-decaying, non-depositing tracer can vary by orders of magnitude depending on the day of the release, even for the same number of hours after the release event. However, the median of the dilution factors based on releases for 365 consecutive days at one site follows a power law relationship in time, as shown in Figure S-1. The relationship is good enough to provide a general rule of thumb for estimating typical future dilution factors in a plume starting at the same point. However, the coefficients of the power law function may vary for different release point locations. Radioactive decay causes the effective dilution factors to decrease more quickly with the time past the release event than the dilution factors based on a non-decaying tracer. An analytical expression for the dilution factors of isotopes with different half-lives can be developed given the power law expression for the non-decaying tracer. If the power-law equation for the median dilution factor, Df, based on a non-decaying tracer has the general form Df=a?◊t?^(-b) for time t after the release event, then the equation has the form Df=e^(-?t)◊a◊t^(-b) for a radioactive isotope, where ? is the decay constant for the isotope.

Eslinger, Paul W.; Lowrey, Justin D.; McIntyre, Justin I.; Miley, Harry S.; Prichard, Andrew W.

2014-03-03T23:59:59.000Z

34

Visualizing Scalar Fields Represented by Adaptive Square Triangulations  

E-Print Network [OSTI]

[Sabella 88], ab­ sorption and reflection [Max 95] providing a means of representing the field by a colored

35

Diagnosing Abortion Problems Abortions can represent a significant loss of (potential)  

E-Print Network [OSTI]

Diagnosing Abortion Problems Abortions can represent a significant loss of (potential) income in the investi- gation of an abortion problem. Breeding dates, parity, production information and health events and Preventing Abortion Problems Ernest Hovingh, Extension Veterinarian, Virginia-Maryland Regional College

Liskiewicz, Maciej

36

Student Committee Representatives Guidelines Congratulations on being selected as a student representative to a GSLIS committee! We are  

E-Print Network [OSTI]

Student Committee Representatives Guidelines Congratulations on being selected as a student to your resume or CV. Your job is to represent students to committees and committees to students. You represent the student body to the committee. Your job is to advocate for your fellow students by bringing

Gilbert, Matthew

37

Student Assembly Offices Student Assembly Representatives: There are four representatives per class to the Student Assembly. Their duties are to  

E-Print Network [OSTI]

Student Assembly Offices Student Assembly Representatives: There are four representatives per class to the Student Assembly. Their duties are to: Represent the student body of the Medical College of Wisconsin-section of the student body. Fairly administer and distribute all funds including those designated as Student Activity

38

4Q CY2001, Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

ID, seven Facility Representatives supported a two-week, around-the-clock assessment of conduct of operations at the Radioactive Waste Management Complex. The assessment provided...

39

4Q CY2000 (PDF), Facility Representative Program Performance...  

Broader source: Energy.gov (indexed) [DOE]

"The Facility Representative Program Performance Indicators Quarterly Report is attached, covering the period from October to December 2000. Data for these indicators are gathered...

40

General Engineer/Physical Scientist (Senior Facility Representative)  

Broader source: Energy.gov [DOE]

A successful candidate in this position will serve as the Site Managers Senior Facility Representative, and responsible for program management, technical monitoring, advising and evaluating all...

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

A Minneapolis, Minnesota Reference Buildings by Climate Zone and Representative City: 6A Minneapolis, Minnesota In addition to the ZIP file for each building type, you can directly...

42

active demethylation represent: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manager Meeting Representatives Environmental Sciences and Ecology Websites Summary: with security requirements associated with imaging, use only the DP form located at either of...

43

Appointment of Contracting Officers and Contracting Officer Representatives  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Order established procedures governing the selection, appointment and termination of Department of Energy contracting officers and contracting officer representatives. Cancels DOE O 541.1A.

2004-04-21T23:59:59.000Z

44

Representative well models for eight geothermal-resource areas  

SciTech Connect (OSTI)

Representative well models have been constructed for eight major geothermal-resource areas. The models define representative times and costs associated with the individual operations that can be expected during drilling and completion of geothermal wells. The models were made for and have been used to evaluate the impacts of potential new technologies. The nature, construction, and validation of the models are presented.

Carson, C.C.; Lin, Y.T.; Livesay, B.J.

1983-02-01T23:59:59.000Z

45

The impact of alternative farm policy proposals for the 1990 Farm Bill on representative beef cattle ranches in Texas  

E-Print Network [OSTI]

of cows supported on 2500 acres of grass pasture and 300 acres of cropland. Alternative dairy policies analyzed were a Trigger Price, a Dairy Termination, a Production Quota, and a Fixed Price Support. The Trigger Price policy represents a continuation... purchases exceed 15. 0 billion pounds milk equivalent. The Production Quota policy requires that milk production remain at the level necessary to hold milk price at tbe 1989 level ($10. 60) per cwt by reducing cow numbers. The Fixed Price Support policy...

Hartman, David Allen

1990-01-01T23:59:59.000Z

46

*Official Academic Senate Representative Dean of UC Davis Extension  

E-Print Network [OSTI]

*Official Academic Senate Representative Dean of UC Davis Extension Recruitment Advisory Committee, Health Sciences, Public Policy & Business Programs, UC Davis Extension Chloe Fox Undergraduate Student, International Agricultural Development; Outreach Coordinator, Program for International Energy Technologies

Schladow, S. Geoffrey

47

Changes to the Facility Representative Program, 10/26/1999  

Broader source: Energy.gov [DOE]

Effective October 1, 1999, the Deputy Secretary tasked this office to manage the Facility Representative Program. We look forward to working with you in continuing and improving this very important...

48

Appointment of Contracting Officers and Contracting Officer Representatives  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish procedures governing the selection, appointment, and termination of contracting officers and for the appointment of contracting officer representatives. Cancels DOE Order 4200.4A. Canceled by DOE O 541.1A.

1996-04-30T23:59:59.000Z

49

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

1A Miami, Florida Reference Buildings by Climate Zone and Representative City: 1A Miami, Florida In addition to the ZIP file for each building type, you can directly view the...

50

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Boulder, Colorado Reference Buildings by Climate Zone and Representative City: 5B Boulder, Colorado In addition to the ZIP file for each building type, you can directly view the...

51

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

A Chicago, Illinois Reference Buildings by Climate Zone and Representative City: 5A Chicago, Illinois In addition to the ZIP file for each building type, you can directly view the...

52

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Phoenix, Arizona Reference Buildings by Climate Zone and Representative City: 2B Phoenix, Arizona In addition to the ZIP file for each building type, you can directly view the...

53

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

7 Duluth, Minnesota Reference Buildings by Climate Zone and Representative City: 7 Duluth, Minnesota In addition to the ZIP file for each building type, you can directly view the...

54

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

A Baltimore, Maryland Reference Buildings by Climate Zone and Representative City: 4A Baltimore, Maryland In addition to the ZIP file for each building type, you can directly view...

55

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

C Seattle, Washington Reference Buildings by Climate Zone and Representative City: 4C Seattle, Washington In addition to the ZIP file for each building type, you can directly view...

56

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

A Atlanta, Georgia Reference Buildings by Climate Zone and Representative City: 3A Atlanta, Georgia In addition to the ZIP file for each building type, you can directly view the...

57

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

8 Fairbanks, Alaska Reference Buildings by Climate Zone and Representative City: 8 Fairbanks, Alaska In addition to the ZIP file for each building type, you can directly view the...

58

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Las Vegas, Nevada Reference Buildings by Climate Zone and Representative City: 3B Las Vegas, Nevada In addition to the ZIP file for each building type, you can directly view the...

59

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

A Houston, Texas Reference Buildings by Climate Zone and Representative City: 2A Houston, Texas In addition to the ZIP file for each building type, you can directly view the...

60

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Helena, Montana Reference Buildings by Climate Zone and Representative City: 6B Helena, Montana In addition to the ZIP file for each building type, you can directly view the...

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

C San Francisco, California Reference Buildings by Climate Zone and Representative City: 3C San Francisco, California In addition to the ZIP file for each building type, you can...

62

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Los Angeles, California Reference Buildings by Climate Zone and Representative City: 3B Los Angeles, California In addition to the ZIP file for each building type, you can...

63

August 20, 2014 meeting with DOE representatives regarding the...  

Energy Savers [EERE]

August 20, 2014 meeting with DOE representatives regarding the remand of the DOE Direct Final Rule as it relates to efficiency standards for non-weatherized gas furnaces August 20,...

64

A representative individual from Arrovian aggregation of parametric individual utilities  

E-Print Network [OSTI]

A representative individual from Arrovian aggregation of parametric individual utilities social choice theory Assumptions Assumption on decisive coalitions Assumptions on individual utility functions Assumptions on the social welfare function Results The socially acceptable utility function

65

Department of Defense Representatives Visit Hanford to Benchmark Safety  

Broader source: Energy.gov [DOE]

RICHLAND, Wash., December 16, 2005, Representatives of the Department of Defense's (DoD's) Voluntary Protection Program Center of Excellence (VPP CX) working to reduce injuries at selected (DoD)...

66

Reference Buildings by Climate Zone and Representative City:...  

Broader source: Energy.gov (indexed) [DOE]

B Albuquerque, New Mexico Reference Buildings by Climate Zone and Representative City: 4B Albuquerque, New Mexico In addition to the ZIP file for each building type, you can...

67

publication 400-230 Feed represents the largest single production expense  

E-Print Network [OSTI]

that is the basis of comparison for energy sources. It contains around 90 percent TDN, and most of the energy comes available from feed suppliers, is readily consumed by animals, and is a fairly low-cost source of feed heavily upon forages for the basis of a feeding program, forages often must be supplemented with energy

Liskiewicz, Maciej

68

Landscape Characterization and Representativeness Analysis for Understanding Sampling Network Coverage  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Sampling networks rarely conform to spatial and temporal ideals, often comprised of network sampling points which are unevenly distributed and located in less than ideal locations due to access constraints, budget limitations, or political conflict. Quantifying the global, regional, and temporal representativeness of these networks by quantifying the coverage of network infrastructure highlights the capabilities and limitations of the data collected, facilitates upscaling and downscaling for modeling purposes, and improves the planning efforts for future infrastructure investment under current conditions and future modeled scenarios. The work presented here utilizes multivariate spatiotemporal clustering analysis and representativeness analysis for quantitative landscape characterization and assessment of the Fluxnet, RAINFOR, and ForestGEO networks. Results include ecoregions that highlight patterns of bioclimatic, topographic, and edaphic variables and quantitative representativeness maps of individual and combined networks.

Maddalena, Damian; Hoffman, Forrest; Kumar, Jitendra; Hargrove, William

69

Landscape Characterization and Representativeness Analysis for Understanding Sampling Network Coverage  

SciTech Connect (OSTI)

Sampling networks rarely conform to spatial and temporal ideals, often comprised of network sampling points which are unevenly distributed and located in less than ideal locations due to access constraints, budget limitations, or political conflict. Quantifying the global, regional, and temporal representativeness of these networks by quantifying the coverage of network infrastructure highlights the capabilities and limitations of the data collected, facilitates upscaling and downscaling for modeling purposes, and improves the planning efforts for future infrastructure investment under current conditions and future modeled scenarios. The work presented here utilizes multivariate spatiotemporal clustering analysis and representativeness analysis for quantitative landscape characterization and assessment of the Fluxnet, RAINFOR, and ForestGEO networks. Results include ecoregions that highlight patterns of bioclimatic, topographic, and edaphic variables and quantitative representativeness maps of individual and combined networks.

Maddalena, Damian; Hoffman, Forrest; Kumar, Jitendra; Hargrove, William

2014-08-01T23:59:59.000Z

70

Wave Energy Resources Representative Sites Around the Hawaiian Islands  

E-Print Network [OSTI]

Wave Energy Resources for Representative Sites Around the Hawaiian Islands Prepared by: Luis A. Vega Ph.D October 11, 2010 #12;Wave Power Resources off the Hawaiian Islands October 11, 2010 1 Foreword This report provides wave energy resource information required to select coastal segments

71

DATE: December 11, 2013 MEMO TO: Curricular Representative  

E-Print Network [OSTI]

Instruction Modes List: This report lists sections with an Instruction Mode not set to `P' in ISIS. · Meets Attendance List: This report lists sections coded in ISIS as optional. · Curricular Representative List can be run in ISIS, and displays real-time curricular data for auditing. In ISIS: Reporting Tools

Wisconsin at Madison, University of

72

Antibiotics and access to clean water represent two major  

E-Print Network [OSTI]

ABSTRACT Antibiotics and access to clean water represent two major advances for public health of clean, potable water to homes and businesses, while eliminating resulting sewage. However, today, our in spreading re- sistance. At the same time, due to growing pressure on our water resources, we are forging new

Subramanian, Venkat

73

Representing and encoding plant architecture: A review Christophe Godin*  

E-Print Network [OSTI]

Review Representing and encoding plant architecture: A review Christophe Godin* CIRAD, Programme de and topological organisation of these components defines the plant architecture. Before the early 1970's-performance computers have become available for plant growth analysis and simulation, trig- gering the development

Paris-Sud XI, Université de

74

A Mathematical Programming Model for Scheduling Pharmaceutical Sales Representatives  

E-Print Network [OSTI]

% to nearly 80,000 from 50,000, and that visits by sales representatives to doctors' offices increased ten. In the next section, we present some background material relevant to this research. Then, in Section 3, we instances in Section 4. We present concluding remarks in Section 5. 2. Background For multi

Gautam, Natarajan

75

66 Academic Nurse Program representatives assist the School  

E-Print Network [OSTI]

interviews, professional development, and dealing with the unknown. Anesthesia Program Representative: Laura of safe surgery and anesthesia practices. Since gradua- tion, he has been involved in global anesthesia also currently serves on the Anesthesia Committee for the Global Alliance for Surgical and Anesthesia

Grishok, Alla

76

Does convective aggregation need to be represented in cumulus parameterizations?  

E-Print Network [OSTI]

Does convective aggregation need to be represented in cumulus parameterizations? Isabelle Tobin,1 in phenomena such as ``hot spots'' or the Madden-Julian Oscillation. These findings support the need climate models lack any such representation. The ability of a cloud system- resolving model to reproduce

77

Representing Topological Relationships between Complex Regions by F-Histograms  

E-Print Network [OSTI]

Representing Topological Relationships between Complex Regions by F-Histograms Lukasz Wawrzyniak between two regions in terms of the thirteen Allen relations. An index to measure the complexity Work in the modeling of topological relationships often relies on an extension into the spatial domain

Matsakis, Pascal

78

Appointment of Contracting Officers and Contracting Officer's Representatives  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish procedures governing the selection, appointment, and termination of contracting officers and for the appointment of contracting officer's representatives. To ensure that only trained and qualified procurement and financial assistance professionals, within the scope of this Order, serve as contracting officers. Cancels DOE O 541.1. Canceled by DOE O 541.1B.

2000-10-27T23:59:59.000Z

79

Anthropogenic Biomes ver. 1 Anthropogenic biomes represent heterogeneous  

E-Print Network [OSTI]

defined by population density and vegetation cover. The 21 biomes are grouped into six major categoriesAnthropogenic Biomes ver. 1 Africa Anthropogenic biomes represent heterogeneous landscape mosaics: Populated irrigated cropland 34: Populated rainfed cropland 35: Remote croplands 41: Residential rangelands

Columbia University

80

US House of Representatives Appropriation Committee Report May 18, 2005  

E-Print Network [OSTI]

US House of Representatives Appropriation Committee Report May 18, 2005 Fusion Energy Sciences The Committee recommendation for fusion energy sciences is $295,155,000, an increase of $5,605,000 over that two-thirds of the proposed increase for the International Thermonuclear Experimental Reactor (ITER

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Representing Abductive Practical Reasoning as an Action-Based  

E-Print Network [OSTI]

Representing Abductive Practical Reasoning as an Action-Based Alternating Transition System Floris present an approach to abductive reasoning by examin- ing it in the context of an argumentation scheme to rea- son abductively about how an agent might have acted to find itself in a particular sceanrio

Atkinson, Katie

82

INTRODUCTION The mammalian hair follicle is a representative but highly  

E-Print Network [OSTI]

INTRODUCTION The mammalian hair follicle is a representative but highly complex epithelial organ, hair follicle induction requires complex signaling between the two apposing tissue layers, which to the formation of the hair follicle, which contain the dermal papilla, proliferating matrix cells and slowly

Chuong, Cheng-Ming

83

Representing mechanical assemblies with features and mating conditions  

E-Print Network [OSTI]

A high-level product representation has been developed and implemented, using design features for part description and mating conditions between features for the relationships among parts. The underlying ideas are that features are necessary...

Qamar, Sayyad Zahid

1993-01-01T23:59:59.000Z

84

Processes, data structures, and apparatuses for representing knowledge  

DOE Patents [OSTI]

Processes, data structures, and apparatuses to represent knowledge are disclosed. The processes can comprise labeling elements in a knowledge signature according to concepts in an ontology and populating the elements with confidence values. The data structures can comprise knowledge signatures stored on computer-readable media. The knowledge signatures comprise a matrix structure having elements labeled according to concepts in an ontology, wherein the value of the element represents a confidence that the concept is present in an information space. The apparatus can comprise a knowledge representation unit having at least one ontology stored on a computer-readable medium, at least one data-receiving device, and a processor configured to generate knowledge signatures by comparing datasets obtained by the data-receiving devices to the ontologies.

Hohimer, Ryan E. (West Richland, WA); Thomson, Judi R. (Guelph, CA); Harvey, William J. (Richland, WA); Paulson, Patrick R. (Pasco, WA); Whiting, Mark A. (Richland, WA); Tratz, Stephen C. (Richland, WA); Chappell, Alan R. (Seattle, WA); Butner, R. Scott (Richland, WA)

2011-09-20T23:59:59.000Z

85

Facility Representative of the Year Award | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA, GA5 &of EnergyOrganizationtotalFacility Representative Award

86

Legacy Computing Markup Language (LCML) and LEGEND -LEGacy Encapsulation for  

E-Print Network [OSTI]

to the Department of Ocean Engineering in partial fulfillment of the requirements for the degree of Master of Science in Ocean Engineering at the MASSACHUSETTS INSTITUTE OF TECHNOLOGY June 2004 c Massachusetts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Department of Ocean Engineering May 26, 2004 Certified by

Patrikalakis, Nicholas M.

87

Simulating a Nationally Representative Housing Sample Using EnergyPlus  

SciTech Connect (OSTI)

This report presents a new simulation tool under development at Lawrence Berkeley National Laboratory (LBNL). This tool uses EnergyPlus to simulate each single-family home in the Residential Energy Consumption Survey (RECS), and generates a calibrated, nationally representative set of simulated homes whose energy use is statistically indistinguishable from the energy use of the single-family homes in the RECS sample. This research builds upon earlier work by Ritchard et al. for the Gas Research Institute and Huang et al. for LBNL. A representative national sample allows us to evaluate the variance in energy use between individual homes, regions, or other subsamples; using this tool, we can also evaluate how that variance affects the impacts of potential policies. The RECS contains information regarding the construction and location of each sampled home, as well as its appliances and other energy-using equipment. We combined this data with the home simulation prototypes developed by Huang et al. to simulate homes that match the RECS sample wherever possible. Where data was not available, we used distributions, calibrated using the RECS energy use data. Each home was assigned a best-fit location for the purposes of weather and some construction characteristics. RECS provides some detail on the type and age of heating, ventilation, and air-conditioning (HVAC) equipment in each home; we developed EnergyPlus models capable of reproducing the variety of technologies and efficiencies represented in the national sample. This includes electric, gas, and oil furnaces, central and window air conditioners, central heat pumps, and baseboard heaters. We also developed a model of duct system performance, based on in-home measurements, and integrated this with fan performance to capture the energy use of single- and variable-speed furnace fans, as well as the interaction of duct and fan performance with the efficiency of heating and cooling equipment. Comparison with RECS revealed that EnergyPlus did not capture the heating-side behavior of heat pumps particularly accurately, and that our simple oil furnace and boiler models needed significant recalibration to fit with RECS. Simulating the full RECS sample on a single computer would take many hours, so we used the 'cloud computing' services provided by Amazon.com to simulate dozens of homes at once. This enabled us to simulate the full RECS sample, including multiple versions of each home to evaluate the impact of marginal changes, in less than 3 hours. Once the tool was calibrated, we were able to address several policy questions. We made a simple measurement of the heat replacement effect and showed that the net effect of heat replacement on primary energy use is likely to be less than 5%, relative to appliance-only measures of energy savings. Fuel switching could be significant, however. We also evaluated the national and regional impacts of a variety of 'overnight' changes in building characteristics or occupant behavior, including lighting, home insulation and sealing, HVAC system efficiency, and thermostat settings. For example, our model shows that the combination of increased home insulation and better sealed building shells could reduce residential natural gas use by 34.5% and electricity use by 6.5%, and a 1 degree rise in summer thermostat settings could save 2.1% of home electricity use. These results vary by region, and we present results for each U.S. Census division. We conclude by offering proposals for future work to improve the tool. Some proposed future work includes: comparing the simulated energy use data with the monthly RECS bill data; better capturing the variation in behavior between households, especially as it relates to occupancy and schedules; improving the characterization of recent construction and its regional variation; and extending the general framework of this simulation tool to capture multifamily housing units, such as apartment buildings.

Hopkins, Asa S.; Lekov, Alex; Lutz, James; Rosenquist, Gregory; Gu, Lixing

2011-03-04T23:59:59.000Z

88

Greening the U.S. House of Representatives  

SciTech Connect (OSTI)

The Greening the Capitol initiative was launched in March, 2007 with the threefold goals of making the U.S. House of Representatives: 1) carbon neutral within 18 months, 2) reducing energy use by 50percent in ten years, and 3) becoming a model of sustainable operations. We report on the recommendations to meet these goals, looking at the targets of opportunity at the Capitol Power Plant, the existing buildings, and the overall operations of the complex. Our findings have shown that these goals are achievable, and that through an integrated approach the savings in carbon and energy can be met. Specific examples include the lighting retrofits in the House offices, parking areas, and the Capitol dome; the retrofits to the HVAC systems and controls, including duct sealing, improving the efficiency of the energy and water use in the food service areas; and improved operations of the steam and chilled water distribution system. A key aspect has been better tracking and feedback to the building operators of the actual energy consumption. We report on the technical opportunities presented by these historic and symbolic buildings in becoming models of sustainability.

Diamond, Rick; Diamond, Rick; Payne, Christopher

2008-03-01T23:59:59.000Z

89

Representing Cloud Processing of Aerosol in Numerical Models  

SciTech Connect (OSTI)

The satellite imagery in Figure 1 provides dramatic examples of how aerosol influences the cloud field. Aerosol from ship exhaust can serve as nucleation centers in otherwise cloud-free regions, forming ship tracks (top image), or can enhance the reflectance/albedo in already cloudy regions. This image is a demonstration of the first indirect effect, in which changes in aerosol modulate cloud droplet radius and concentration, which influences albedo. It is thought that, through the effects it has on precipitation (drizzle), aerosol can also affect the structure and persistence of planetary boundary layer (PBL) clouds. Regions of cellular convection, or open pockets of cloudiness (bottom image) are thought to be remnants of strongly drizzling PBL clouds. Pockets of Open Cloudiness (POCs) (Stevens et al. 2005) or Albrecht's ''rifts'' are low cloud fraction regions characterized by anomalously low aerosol concentrations, implying they result from precipitation. These features may in fact be a demonstration of the second indirect effect. To accurately represent these clouds in numerical models, we have to treat the coupled cloud-aerosol system. We present the following series of mesoscale and large eddy simulation (LES) experiments to evaluate the important aspects of treating the coupled cloud-aerosol problem. 1. Drizzling and nondrizzling simulations demonstrate the effect of drizzle on a mesoscale forecast off the California coast. 2. LES experiments with explicit (bin) microphysics gauge the relative importance of the shape of the aerosol spectrum on the 3D dynamics and cloud structure. 3. Idealized mesoscale model simulations evaluate the relative roles of various processes, sources, and sinks.

Mechem, D.B.; Kogan, Y.L.

2005-03-18T23:59:59.000Z

90

Transient and Pseudosteady-State Productivity of Hydraulically Fractured Well  

E-Print Network [OSTI]

, are represented in the form of transient Ė peudosteady-state productivity indices. The numerical simulator is validated by comparing results to known analytical solution for radial flow, existing models of productivity for vertical well intersected by vertical...

Lumban Gaol, Ardhi

2012-10-19T23:59:59.000Z

91

Gregory H. Friedman: Before the U.S. House of Representatives...  

Energy Savers [EERE]

Government Reform Gregory H. Friedman: Before the U.S. House of Representatives Committee on Government Reform March 20, 2003 Before the U.S. House of Representatives Committee on...

92

Chinaís Military Representatives:†Striving Toward Professional†Contracting and Procurement  

E-Print Network [OSTI]

effect of specialization could be to develop military representatives who are experts in specific areas of the weapons and

Puska, Susan M; McReynolds, Joe; Geary, Debra

2011-01-01T23:59:59.000Z

93

The Allied Health Faculty Organization invited Representative Ed Bryant (7th Congressional  

E-Print Network [OSTI]

The Allied Health Faculty Organization invited Representative Ed Bryant (7th Congressional District) to visit the University and discuss such topics as health and education. Representative Bryant is a member Commerce Committee Prescription Drug Task Force. Prior to his service in the House, Representative Bryant

Cui, Yan

94

Facility Representatives  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecord ofESPCofConstructionofFY 2011 Report toAnnuAlFaces of the

95

Facility Representatives  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat PumpRecord ofESPCofConstructionofFY 2011 Report toAnnuAlFaces of the063-2011

96

What every designated representative should know about Title IV and Title V enforcement provisions  

SciTech Connect (OSTI)

Title IV of the Clean Air Act not only created a regulatory program unlike any other under the Clean Air Act, but also established a unique position--the designated representative--as an integral part of the program. The designated representative is required to meet certain basic obligations under Title IV, and a panoply of enforcement mechanisms are available to EPA in the event of noncompliance with these obligations. Also, because a designated representative may take on responsibilities under the permit provisions of Title V of the Clean Air Act, the designated representative can also be subject to an enforcement action for failure to comply with certain Title V permit requirements. This paper considers the basic definition of the designated representative under EPA`s Title IV and Title V regulations, identifies the responsibilities assigned to the designated representative, and then analyzes the enforcement mechanisms that may be applied to the designated representative if a regulatory responsibility has not been satisfied.

Bischoff, C.A. [Gallagher and Kennedy, Phoenix, AZ (United States); Dayal, P. [Tucson Electric Power Co., Tucson, AZ (United States)

1995-12-31T23:59:59.000Z

97

Dynamics of assembly production flow  

E-Print Network [OSTI]

Despite recent developments in management theory, maintaining a manufacturing schedule remains difficult because of production delays and fluctuations in demand and supply of materials. The response of manufacturing systems to such disruptions to dynamic behavior has been rarely studied. To capture these responses, we investigate a process that models the assembly of parts into end products. The complete assembly process is represented by a directed tree, where the smallest parts are injected at leaves and the end products are removed at the root. A discrete assembly process, represented by a node on the network, integrates parts, which are then sent to the next downstream node as a single part. The model exhibits some intriguing phenomena, including overstock cascade, phase transition in terms of demand and supply fluctuations, nonmonotonic distribution of stockout in the network, and the formation of a stockout path and stockout chains. Surprisingly, these rich phenomena result from only the nature of distr...

Ezaki, Takahiro; Nishinari, Katsuhiro

2015-01-01T23:59:59.000Z

98

Product Demonstrations  

Broader source: Energy.gov [DOE]

The Consortium will pursue a number of demonstrations following the general procedure used by DOE's GATEWAY demonstration program. Specific products to be featured in a demonstration may be...

99

E-Print Network 3.0 - ambassador permanent representative Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of representatives of four neighborhood organizations--Southeast University... , and Westcott East Neighborhood Association--the Fourth and Fifth District Councilors, and...

100

High Schools Served by Regional Admissions Representatives (by County) Lisa Overstreet  

E-Print Network [OSTI]

High Schools Served by Regional Admissions Representatives (by County) Region 1 Lisa Overstreet San Joaquin El Dorado San Mateo Fresno Sierra Kings Solano Lake Sonoma Madera Stanislaus Mariposa

Belanger, David P.

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

1Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January to March 2005. Data for these indicators are gathered by Field elements...

102

2Q CY2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators QuarterlyReport covering the period from April to June 2008. Data for these indicators aregathered by Field elements...

103

2Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from April to June† 2003. Data for these indicators are gathered by Field elements...

104

3Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the Period July† through September 2011. Data for these indicators were gathered...

105

1Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January† to March 2006. Data for these indicators are gathered by Field...

106

3Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from July to September† 2003. Data for these indicators are gathered by Field...

107

3Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

The Facility Representative Program Indicators (Pis) Quarterly Report attached, covering the period from July to September 2000. Data for these indicators are gathered by the Field elements...

108

3Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

This memorandum summarizes the highlights of the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period of July through September 2010. Data for these...

109

4Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"Attached is the Facility Representative (FR) Program Performance Indicators QuarterlyReport covering the period from October to December 2007. Data for these indicators aregathered by Field...

110

2Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from April to June† 2004. Data for these indicators are gathered by Field elements...

111

4Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative Program Performance Indicators (Pis) Quarterly Report Covering the Period from October to December 2002. Data for these indicators are gathered by Field...

112

1Q CY2012 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January through March 2012. Data for these indicators were...

113

2Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period April through June 20 1 1. Data for these indicators were gathered...

114

3Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from July to September† 2004. Data for these indicators are gathered by Field...

115

1Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"Attached is the Facility Representative (FR) Program Performance Indicators Quarterly† Report covering the period from January to March2010. Data for these indicators are gathered by Field...

116

3Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly† Report covering the period from July to September 2009. Data for these indicators are gathered by Field...

117

4Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October to December 2006. Data for these indicators are gathered by Field...

118

4Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"Attached is the Facility Representative (FR) Program Performance Indicators Quarterly† Report covering the period from October to December 2009. Data for these indicators are gathered by Field...

119

2Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2007. Data for these indicators are gathered by field elements...

120

3Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from July to September 2006. Data for these indicators are gathered by Field...

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

4Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October through December 2011. Data for these indicators were...

122

4Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October to December 2005. Data for these indicators are gathered by Field...

123

4Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"This memorandum summarizes the highlights of the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period October through December 2010. Data for these...

124

4Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from October to December† 2004. Data for these indicators are gathered by Field...

125

3Q C&2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"Attached is the Facility Representative (FR) Program Performance Indicators Quarterly† Report covering the period from July to September†† 2008. Data for these indicators aregathered by Field...

126

1Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"Attached is the Facility Representative (FR) Program Performance Indicators Quarterly† Report covering the period from January to March 2009. Data for these indicators are gathered by Field...

127

2Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2005. Data for these indicators are gathered by Field elements...

128

4Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from October to December† 2003. Data for these indicators are gathered by Field...

129

1Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January to March 2007. Data for these indicators are gathered by Field elements...

130

1Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the Period January through March 2011. Data for these indicators were gathered...

131

4Q CY2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"Attached is the Facility Representative (FR) Program Performance Indicators Quarterly† Report covering the period from October to December†† 2008. Data for these indicators are† gathered by Field...

132

2Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"Attached is the Facility Representative (FR) Program Performance Indicators Quarterly† Report covering the period from April to June† 2009. Data for these indicators are gathered by Field elements...

133

2Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2006. Data for these indicators are gathered by Field elements...

134

2Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

This memorandum summarizes the highlight of, and announces the availablity on-line of, the Facility Representative (FR) Program Performance Indicators are gathered by Field elements quarterly per...

135

2Q CY2012 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April through June 2012. Data for these indicators were...

136

1Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from January to March† 2003. Data for these indicators are gathered by Field...

137

Do women represent women? : gender and policy in Argentina and Mexico  

E-Print Network [OSTI]

Fiscal Federalism in Argentina: Policies, Politics, andRepresent Women? Gender and Policy in Argentina and Mexico AWomen? Gender and Policy in Argentina and Mexico. by

Piscopo, Jennifer M.

2011-01-01T23:59:59.000Z

138

Representing Energy Price Variability in Long-and Medium-term Hydropower Optimization  

E-Print Network [OSTI]

1 Representing Energy Price Variability in Long- and Medium- term Hydropower Optimization Marcelo A Resources Planning and Management, 2012, in press ABSTRACT Representing peak and off-peak energy prices and examines the reliability of an existing approximate method to incorporate hourly energy price information

Pasternack, Gregory B.

139

A generalized 3D inverted pendulum model to represent human normal walking  

E-Print Network [OSTI]

A generalized 3D inverted pendulum model to represent human normal walking Sophie Sakka IRCCy,lacouture}@univ-poitiers.fr Abstract-- This paper compares different inverted pendulum models to represent the stance phase of human adapted to pathological walking as the walking symmetry hypothesis -needed to build classical inverted

Paris-Sud XI, Université de

140

Detecting and Representing Relevant Web Deltas in Whoweda Sourav S Bhowmick1  

E-Print Network [OSTI]

Detecting and Representing Relevant Web Deltas in Whoweda Sourav S Bhowmick1 Sanjay Madria2 Wee given the old and new versions of a set of interlinked Web documents, retrieved in response to a user's query. In particular, we show how to detect and represent web deltas, i.e., changes in the Web documents

Bhowmick, Sourav S.

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

INTRODUCTION Yard wastes currently represent about 15% of the total municipal solid waste collected in  

E-Print Network [OSTI]

INTRODUCTION Yard wastes currently represent about 15% of the total municipal solid waste collected: Collect representative and typical yard trash samples throughout Florida; Characterize the wastes these wastes. WORK ACCOMPLISHED Visited two compost and mulch processing facilities in Gainesville on 10

Ma, Lena

142

Hydrogen Production  

Fuel Cell Technologies Publication and Product Library (EERE)

This 2-page fact sheet provides a brief introduction to hydrogen production technologies. Intended for a non-technical audience, it explains how different resources and processes can be used to produ

143

Financing the Production and Marketing of Texas Broilers.  

E-Print Network [OSTI]

within 5 years. Operating capital, principally in. the form of chicks and ,feed, is paid for in the markup of the dealer and to a small extent by financing charges. Settlement on operating loans is made in accordance with the grower's particular..., the producer assumed all the risk. Dealers provided the same services, including marketing, to their open-account and cash customers as to those they financed under heavier risk to themselves. Substantial savings were made by producers who paid cash...

Bebout, Harley

1956-01-01T23:59:59.000Z

144

DISTRIBUTED OPTIMIZATION AND CONTROL OF OFFSHORE OIL PRODUCTION: THE INTELLIGENT  

E-Print Network [OSTI]

DISTRIBUTED OPTIMIZATION AND CONTROL OF OFFSHORE OIL PRODUCTION: THE INTELLIGENT PLATFORM Michael R to distributed optimization and control of offshore oil production systems. The model incorporates a complex pipeline network. Oil and gas production systems are represented as a network of connected hierarchical

Foss, Bjarne A.

145

Traffic flow models and service rules for complex production systems  

E-Print Network [OSTI]

Traffic flow models and service rules for complex production systems C. Ringhofer Abstract We emphasis is given to the implementation of service rules for complex systems, involving multiple product flow type models for complex production systems. Traffic flow models represent, in some sense

Ringhofer, Christian

146

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future is a virtue ­ your insight, clarity of thought, #12;Note: This syllabus may represent

147

Gregory H. Friedman: Before The U.S. House of Representatives...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The U.S. House of Representatives Committee on Government Reform Subcommittee on the Federal Workforce and Agency Organization Gregory H. Friedman: Before The U.S. House of...

148

STUDENT GOVERNMENT ASSOCIATION The Student Government Association, or "SGA", has the greatest student representative  

E-Print Network [OSTI]

_____________________________________________________________________________ STUDENT GOVERNMENT ASSOCIATION The Student Government Association, or "SGA", has the greatest student representative authority on campus. The Student Government Association receives a $4.50 per student per quarter student-assessed fee

Selmic, Sandra

149

2Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report  

Broader source: Energy.gov [DOE]

"The Facility Representative Program Performance Indicators (PIs) Quarterly Report is attached, covering the period from April 2000 to June 2000. Data for these indicators are gathered by the Field...

150

Lessons Learned in Optimizing Workers' and Worker Representatives' Input to Work Planning and Control  

Broader source: Energy.gov [DOE]

Slide Presentation by Tom McQuiston, Dr. P.H., United Steelworkers - Tony Mazzocchi Center for Health, Safety and Environmental Education. Lessons Learned in Optimizing Workersí and Worker Representativesí Input in Work Planning and Control.

151

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS  

SciTech Connect (OSTI)

This Department of Energy National Energy Technology Laboratory sponsored project developed carbon products, using mildly hydrogenated solvents to extract the organic portion of coal to create synthetic pitches, cokes, carbon foam and carbon fibers. The focus of this effort was on development of lower cost solvents, milder hydrogenation conditions and improved yield in order to enable practical production of these products. This technology is needed because of the long-term decline in production of domestic feedstocks such as petroleum pitch and coal tar pitch. Currently, carbon products represents a market of roughly 5 million tons domestically, and 19 million tons worldwide. Carbon products are mainly derived from feedstocks such as petroleum pitch and coal tar pitch. The domestic supply of petroleum pitch is declining because of the rising price of liquid fuels, which has caused US refineries to maximize liquid fuel production. As a consequence, the long term trend has a decline in production of petroleum pitch over the past 20 years. The production of coal tar pitch, as in the case of petroleum pitch, has likewise declined significantly over the past two decades. Coal tar pitch is a byproduct of metallurgical grade coke (metcoke) production. In this industry, modern metcoke facilities are recycling coal tar as fuel in order to enhance energy efficiency and minimize environmental emissions. Metcoke production itself is dependent upon the production requirements for domestic steel. Hence, several metcoke ovens have been decommissioned over the past two decades and have not been replaced. As a consequence sources of coal tar are being taken off line and are not being replaced. The long-term trend is a reduction in coal tar pitch production. Thus import of feedstocks, mainly from Eastern Europe and China, is on the rise despite the relatively large transportation cost. To reverse this trend, a new process for producing carbon products is needed. The process must be economically competitive with current processes, and yet be environmentally friendly as well. The solvent extraction process developed uses mild hydrogenation of low cost oils to create powerful solvents that can dissolve the organic portion of coal. The insoluble portion, consisting mainly of mineral matter and fixed carbon, is removed via centrifugation or filtration, leaving a liquid solution of coal chemicals and solvent. This solution can be further refined via distillation to meet specifications for products such as synthetic pitches, cokes, carbon foam and fibers. The most economical process recycles 85% of the solvent, which itself is obtained as a low-cost byproduct from industrial processes such as coal tar or petroleum refining. Alternatively, processes have been developed that can recycle 100% of the solvent, avoiding any need for products derived from petroleum or coal tar.

Dady Dadyburjor; Philip R. Biedler; Chong Chen; L. Mitchell Clendenin; Manoj Katakdaunde; Elliot B. Kennel; Nathan D. King; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2004-08-31T23:59:59.000Z

152

Cultural values represented by Hispanic and US superheroes: a text analysis  

E-Print Network [OSTI]

CULTURAL VALUES REPRESENTED BY HISPANIC AND US SUPERHEROES: A TEXT ANALYSIS A Thesis by CLAUDIA DEL CARMEN SANCHEZ CASTILLO Submitted to the Office of Graduate Studies of Texas A%M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 1999 Major Subject: Curriculum and Instruction CULTURAL VALUES REPRESENTED BY HISPANIC AND US SUPERHEROES: A TEXT ANALYSIS A Thesis by CLAUDIA DEL CAKvKN SANCHEZ CASTILLO Submitted to the Office of Graduate...

Sanchez Castillo, Claudia del Carmen

1999-01-01T23:59:59.000Z

153

FOREST PRODUCTS MARKET IN 2007 AND PROSPECTS FOR 2008  

E-Print Network [OSTI]

1 FOREST PRODUCTS MARKET IN 2007 AND PROSPECTS FOR 2008 IN ROMANIA 1.General economic trends affecting the forest and forest industries sector In Romania, the year 2007 represents the sixth consecutive

154

Transforming PEPA Models to Obtain Product Form Bounds†  

E-Print Network [OSTI]

consider here do not have product form solution because the necessary structural conditions are not satisfied. We demonstrate transformations of these models, based on modifications of the PEPA expressions representing them, which result in new models which...

Tomasik-Krawczyk, Joanna; Hillston, Jane

155

Synthesis of Polycyclic Natural Products  

SciTech Connect (OSTI)

With the continuous advancements in molecular biology and modern medicine, organic synthesis has become vital to the support and extension of those discoveries. The isolations of new natural products allow for the understanding of their biological activities and therapeutic value. Organic synthesis is employed to aid in the determination of the relationship between structure and function of these natural products. The development of synthetic methodologies in the course of total syntheses is imperative for the expansion of this highly interdisciplinary field of science. In addition to the practical applications of total syntheses, the structural complexity of natural products represents a worthwhile challenge in itself. The pursuit of concise and efficient syntheses of complex molecules is both gratifying and enjoyable.

Tuan Hoang Nguyen

2003-05-31T23:59:59.000Z

156

Representativeness-based Sampling Network Design for the State of Alaska  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

This data collection contains the map products described in Hoffman et. al., 2013, journal DOI reference: 10.1007/s10980-013-9902-0

Kumar, Jitendra; Hoffman, Forrest; Hargrove, William; Mills, Richard

157

A constitutive model for representing coupled creep, fracture, and healing in rock salt  

SciTech Connect (OSTI)

The development of a constitutive model for representing inelastic flow due to coupled creep, damage, and healing in rock salt is present in this paper. This model, referred to as Multimechanism Deformation Coupled Fracture model, has been formulated by considering individual mechanisms that include dislocation creep, shear damage, tensile damage, and damage healing. Applications of the model to representing the inelastic flow and fracture behavior of WIPP salt subjected to creep, quasi-static loading, and damage healing conditions are illustrated with comparisons of model calculations against experimental creep curves, stress-strain curves, strain recovery curves, time-to-rupture data, and fracture mechanism maps.

Chan, K.S.; Bodner, S.R. [Southwest Research Inst., San Antonio, TX (United States); Munson, D.E.; Fossum, A.F. [Sandia National Labs., Albuquerque, NM (United States)

1996-03-01T23:59:59.000Z

158

RMOTC - Production  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearch Welcome to theNewsCenter forQuality AssuranceProduction RMOTC

159

University Safety Partners Mission Statement The University Safety Partners (USP) is a group of appointed representatives  

E-Print Network [OSTI]

the work environment at Stanford. The role of University Safety Partners is to: · Advise the UniversityUniversity Safety Partners Mission Statement The University Safety Partners (USP) is a group of appointed representatives who are responsible for the administration of the University's health and safety

160

Law School Admissions Panel Law School representatives will discuss the law school admissions  

E-Print Network [OSTI]

Law School Admissions Panel Law School representatives will discuss the law school admissions process and talk about their respective schools in a panel discussion format. Join us and learn how in Law School Admissions Panel epresentatives will discuss the law school admissions process and talk

Brinkmann, Peter

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Representing OGC Geospatial Web Services in OWL-S Web Service Ontologies  

E-Print Network [OSTI]

Representing OGC Geospatial Web Services in OWL-S Web Service Ontologies Kristin Stock,1,2 Anne Robertson3 and Mark Small3 1 Centre for Geospatial Science, University of Nottingham, Nottingham NG7 2RD geospatial web services, most of which conform to specifications of the Open Geospatial Consortium (OGC

Stock, Kristin

162

Nuclear talks in Austria International representatives will meet in Vienna on Saturday to discuss a  

E-Print Network [OSTI]

Nuclear talks in Austria International representatives will meet in Vienna on Saturday to discuss a controversial nuclear fusion plan. The technical meeting of experts is intended to pave the way of nuclear fusion say it provides an attractive long-term energy option, because the basic materials needed

163

MICHIGAN STATE UNIVERSITY DEPARTMENT OF PSYCHOLOGY Come join us and representatives from the following Universities and  

E-Print Network [OSTI]

MICHIGAN STATE UNIVERSITY ∑ DEPARTMENT OF PSYCHOLOGY Come join us and representatives from School of Professional PSY - PsyD University of Michigan ≠ MSW & MPH Western Michigan University - MA MSU the following Universities and Professional Schools to learn about their graduate programs, admission

Liu, Taosheng

164

CO2 efflux from Amazonian headwater streams represents a significant fate for deep soil respiration  

E-Print Network [OSTI]

CO2 efflux from Amazonian headwater streams represents a significant fate for deep soil respiration amounts of CO2 to the atmosphere, while the magnitude of CO2 degassing from small streams remains a major was as terrestrially-respired CO2 dissolved within soils, over 90% of which evaded to the atmosphere within headwater

Lehmann, Johannes

165

Signs and Sight in Southern Uganda Representing Perception in Ordinary Conversation  

E-Print Network [OSTI]

124 Signs and Sight in Southern Uganda Representing Perception in Ordinary Conversation Ben Orlove-spoken language in the East African nation of Uganda, frequently include discussions and evaluations of signs, drawn from field work that we have conducted in Uganda, centers on a set of beliefs that certain sensory

Orlove, Benjamin S.

166

Instructions to the Applicant 1. The Facility Representative shall complete a "Special Event Application &  

E-Print Network [OSTI]

Application & Permit". A site and floor plan must be submitted to the Office of the State Fire Marshal with the Fire and Life Safety requirements of Title 19, Title 24, and the conditions noted on this permit. Non. The Facility Representative shall transmit the "Special Event Application & Permit" to the Office of the State

de Lijser, Peter

167

Mechanism-based Representative Volume Elements (RVEs) for Predicting Property Degradations in Multiphase Materials  

SciTech Connect (OSTI)

Quantitative understanding of the evolving thermal-mechanical properties of a multi-phase material hinges upon the availability of quantitative statistically representative microstructure descriptions. Questions then arise as to whether a two-dimensional (2D) or a three-dimensional (3D) representative volume element (RVE) should be considered as the statistically representative microstructure. Although 3D models are more representative than 2D models in general, they are usually computationally expensive and difficult to be reconstructed. In this paper, we evaluate the accuracy of a 2D RVE in predicting the property degradations induced by different degradation mechanisms with the multiphase solid oxide fuel cell (SOFC) anode material as an example. Both 2D and 3D microstructure RVEs of the anodes are adopted to quantify the effects of two different degradation mechanisms: humidity-induced electrochemical degradation and phosphorus poisoning induced structural degradation. The predictions of the 2D model are then compared with the available experimental measurements and the results from the 3D model. It is found that the 2D model, limited by its inability of reproducing the realistic electrical percolation, is unable to accurately predict the degradation of thermo-electrical properties. On the other hand, for the phosphorus poisoning induced structural degradation, both 2D and 3D microstructures yield similar results, indicating that the 2D model is capable of providing computationally efficient yet accurate results for studying the structural degradation within the anodes.

Xu, Wei; Sun, Xin; Li, Dongsheng; Ryu, Seun; Khaleel, Mohammad A.

2013-02-01T23:59:59.000Z

168

Representing hierarchical POMDPs as DBNs, with applications to mobile robot navigation  

E-Print Network [OSTI]

Representing hierarchical POMDPs as DBNs, with applications to mobile robot navigation Kevin P and learning is faster than in SCFGs. In particular, inference in an HHMM can be done in O(T) time [MP01) takes O(T 3 ) time [JM00]. This also means learning, which uses inference as a subroutine, is faster. Y

Murphy, Kevin Patrick

169

DO GLOBAL WARMING AND CLIMATE CHANGE REPRESENT A SERIOUS THREAT TO OUR WELFARE  

E-Print Network [OSTI]

DO GLOBAL WARMING AND CLIMATE CHANGE REPRESENT A SERIOUS THREAT TO OUR WELFARE AND ENVIRONMENT? By Michael E. Mann I. Introduction The subjects of "global warming" and "climate change" have become parts of both the popular lexicon and the public discourse. Discussions of global warming often evoke passionate

170

Committee on Appropriations, Subcommittee on Energy and Water United States House of Representatives  

E-Print Network [OSTI]

, and through job growth in the `clean energy' sector. To accomplish these goals, not only will a comprehensiveCommittee on Appropriations, Subcommittee on Energy and Water United States House of Representatives Testimony for the February 28, 2007 Hearing on: A Ten Year Outlook for Energy by Daniel M. Kammen

Kammen, Daniel M.

171

Laser Safety Web Resources The web links below represent varied resources for laser safety information and  

E-Print Network [OSTI]

Laser Safety Web Resources The web links below represent varied resources for laser safety endorsement by Georgia Tech. Please contact the Laser Safety Officer if you know of any helpful resources of Laser Physics and Technology, http://www.rp- photonics.com/encyclopedia.html Kentek, http

Houston, Paul L.

172

INTRODUCTIONINTRODUCTION Residential landscapes represent a large percentage of urban land cover (Martin et al.  

E-Print Network [OSTI]

INTRODUCTIONINTRODUCTION Residential landscapes represent a large percentage of urban land cover to residential landscapes, we propose a conceptual model that integrates socioeconomic factors that influence, and socioeconomic factors: Exploring the relationships in a residential landscape. Susannah B. Lerman1 and Paige S

Hall, Sharon J.

173

On the Possibility of Using Complex Values in Fuzzy Logic For Representing Inconsistencies  

E-Print Network [OSTI]

applications in mind, including the idea of applying fuzzy logic to control. In surprising contrast to Zadeh's initial predictions, fuzzy control has become the most successful area of applications of fuzzy logic (seeOn the Possibility of Using Complex Values in Fuzzy Logic For Representing Inconsistencies Hung T

Kreinovich, Vladik

174

Patterns for Representing FMEA in Formal Specification of Control Systems Ilya Lopatkin, Alexei Iliasov,  

E-Print Network [OSTI]

Patterns for Representing FMEA in Formal Specification of Control Systems Ilya Lopatkin, Alexei, Finland {Yuliya.Prokhorova, Elena.Troubitsyna}@abo.fi Abstract -- Failure Modes and Effects analysis (FMEA) is a widely used technique for inductive safety analysis. FMEA provides engineers with valuable information

Southampton, University of

175

Pipeline Transportation of Petroleum Products 1 Ruy Luiz Milidi'u  

E-Print Network [OSTI]

Pipeline Transportation of Petroleum Products 1 Ruy Luiz Milidi'u milidiu@inf.puc­rio.br Artur, 2000 Abstract: In this paper, we introduce a new model for pipeline transportation of petroleum products. We use a directed graph with arcs representing pipes and nodes representing locations. Moreover

Endler, Markus

176

Online Pipeline Transportation of Petroleum Products with no Due Dates 1  

E-Print Network [OSTI]

On­line Pipeline Transportation of Petroleum Products with no Due Dates 1 Ruy Luiz Milidi'u milidiu, 2001 Abstract: In this paper, we introduce a new model for pipeline transportation of petroleum products without due dates. We use a directed multigraph G where arcs represent pipes and nodes represent

Endler, Markus

177

Nulljob product  

SciTech Connect (OSTI)

The ever increasing demand for more CPU cycles for data analysis on the authors' Central VAX Cluster led them to investigate new ways to utilize more fully the resources that were available. A review of the experiment and software development VAX systems on site revealed many unused computing cycles. Furthermore, these systems were all connected by DECnet which would allow easy file transfer and remote batch job submission. A product was developed to allow jobs to be submitted on the Central VAX Cluster but actually to be run on one of the remote systems. The processing of the jobs was arranged, to the greatest extent possible, to be transparent to the user and to have minimal impact on both the Central VAX Cluster and remote systems.

Hughart, N.; Ritchie, D.

1987-08-01T23:59:59.000Z

178

NULLJOB product  

SciTech Connect (OSTI)

The ever increasing demand for more CPU cycles for data analysis on our Central VAX Cluster led us to investigate new ways to utilize more fully the resources that were available. A review of the experiment and software development VAX systems on site revealed many unused computing cycles. Furthermore, these systems were all connected by DECnet which would allow easy file transfer and remote batch job submission. A product was developed to allow jobs to be submitted on the Central VAX Cluster but actually to be run on one of the remote systems. The processing of the jobs was arranged, to the greatest extent possible, to be transparent to the user and to have minimal impact on both the Central VAX Cluster and remote systems.

Hughart, N.; Ritchie, D.

1987-05-01T23:59:59.000Z

179

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may;Note: This syllabus may represent a past offering of this course and future course offerings may differ

180

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may to its cultural relevance and effectiveness 50% Week 9 #12;Note: This syllabus may represent a past

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may) with your progress report (PDF). (1-3 pages) #12;Note: This syllabus may represent a past offering

182

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may-class participation (required) #12;Note: This syllabus may represent a past offering of this course and future course

183

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may Participation 10% Major Figure 15% Group Web 25% Final Paper 40% #12;Note: This syllabus may represent a past

184

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may is a part of your class grade and that it includes many components. #12;Note: This syllabus may represent

185

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may will design and build a #12;Note: This syllabus may represent a past offering of this course and future course

186

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may and prototype files can be in the format most convenient for you. #12;Note: This syllabus may represent a past

187

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may, #12;Note: This syllabus may represent a past offering of this course and future course offerings may

188

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may: This syllabus may represent a past offering of this course and future course offerings may differ. Course

189

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may argumentation around the concept of crowdsourcing/crowd work. #12;Note: This syllabus may represent a past

190

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may your professional identity using multiple avenues (i.e., #12;Note: This syllabus may represent a past

191

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may discussions): 20% #12;Note: This syllabus may represent a past offering of this course and future course

192

Meeting the Radiative Forcing Targets of the Representative Concentration Pathways in a World with Agricultural Climate Impacts  

SciTech Connect (OSTI)

This study assesses how climate impacts on agriculture may change the evolution of the agricultural and energy systems in meeting the end-of-century radiative forcing targets of the Representative Concentration Pathways (RCPs). We build on the recently completed ISI-MIP exercise that has produced global gridded estimates of future crop yields for major agricultural crops using climate model projections of the RCPs from the Coupled Model Intercomparison Project Phase 5 (CMIP5). For this study we use the bias-corrected outputs of the HadGEM2-ES climate model as inputs to the LPJmL crop growth model, and the outputs of LPJmL to modify inputs to the GCAM integrated assessment model. Our results indicate that agricultural climate impacts generally lead to an increase in global cropland, as compared with corresponding emissions scenarios that do not consider climate impacts on agricultural productivity. This is driven mostly by negative impacts on wheat, rice, other grains, and oil crops. Still, including agricultural climate impacts does not significantly increase the costs or change the technological strategies of global, whole-system emissions mitigation. In fact, to meet the most aggressive climate change mitigation target (2.6 W/m2 in 2100), the net mitigation costs are slightly lower when agricultural climate impacts are considered. Key contributing factors to these results are (a) low levels of climate change in the low-forcing scenarios, (b) adaptation to climate impacts, simulated in GCAM through inter-regional shifting in the production of agricultural goods, and (c) positive average climate impacts on bioenergy crop yields.

Kyle, G. Page; Mueller, C.; Calvin, Katherine V.; Thomson, Allison M.

2014-02-28T23:59:59.000Z

193

State power plant productivity programs  

SciTech Connect (OSTI)

The findings of a working group formed to review the status of efforts by utilities and utility regulators to increase the availability and reliability of generating units are presented. Representatives from nine state regulatory agencies, NRRI, and DOE, participated on the Working Group. The Federal government has been working cooperatively with utilities, utility organizations, and with regulators to encourage and facilitate improvements in power plant productivity. Cooperative projects undertaken with regulatory and energy commissions in California, Illinois, New York, Ohio, Texas, North Carolina and Mighigan are described. Following initiation of these cooperative projects, DOE funded a survey to determine which states were explicitly addressing power plant productivity through the regulatory process. The Working Group was formed following completion of this survey. The Working Group emphasized the need for those power plant productivity improvements which are cost effective. The cost effectiveness of proposed availability improvement projects should be determined within the context of opportunities for operating and capital improvements available to an entire utility. The Working Group also identified the need for: allowing for plant designs that have a higher construction cost, but are also more reliable; allowing for recovery and reducing recovery lags for productivity-related capital expenditures; identifying and reducing disincentives in the regulatory process; ascertaining that utilities have sufficient money available to undertake timely maintenance; and support of EPRI and NERC to develop a relevant and accurate national data base. The DOE views these as extremely important aspects of any regulatory program to improve power plant productivity.

Not Available

1981-02-01T23:59:59.000Z

194

Representing energy technologies in top-down economic models using bottom-up information  

E-Print Network [OSTI]

example (e.g., a 500 megawatt coal fired power plant, or a 1-MW wind turbine). The technologies production may be treated as a single sector with capital, labor, material, and fuel inputs. Continuous

195

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may Course Schedule: MW, 1:30-3:20pm; or TTh, 10:30am-12:20pm *DISCLAIMER: This syllabus represents computational thinking, including: #12;Note: This syllabus may represent a past offering of this course

196

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may: This syllabus may represent a past offering of this course and future course offerings may differ. Course;Note: This syllabus may represent a past offering of this course and future course offerings may differ

197

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may;Note: This syllabus may represent a past offering of this course and future course offerings may differHutchinson Style: #12;Note: This syllabus may represent a past offering of this course and future course offerings

198

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may Tuesday Introduction to course Introduction to user assistance (UA) #12;Note: This syllabus may represent: This syllabus may represent a past offering of this course and future course offerings may differ. Thursday

199

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may: This syllabus may represent a past offering of this course and future course offerings may differ. Course to Seidman, pp.7­14, Weiss, Chap.1 -- #12;Note: This syllabus may represent a past offering of this course

200

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may Week 3 A A. Lecture: Constructive criticism & evaluation rubric #12;Note: This syllabus may represent sources #12;Note: This syllabus may represent a past offering of this course and future course offerings

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Finite element plate formulation including transverse shear effects for representing composite shell structures  

E-Print Network [OSTI]

For Representing Composite Shell Structures. (May 1987) Jsmil M. Hamdallah, B. S. , University of Toledo Chairman of Advisory Committee: Dr. John J. Engblom A finite element formulation for the analysis of thin to moderately thick lam- inated composite shell... in an analysis if delamination is to be avoided. The results obtained in this research confirm the potential use of the element presented as an accurate and eflicient tool in the analysis of thin to moderately thick laminated shell structures. To my parents...

Hamdallah, Jamil M.

2012-06-07T23:59:59.000Z

202

Solubility and freezing effects of Fe2+ solutions representative of upper tropospheric and lower  

E-Print Network [OSTI]

determined the total equilibrium metal solubility ([Fe2+ ]T and [Mg2+ ]T) in 20¬≠90 wt % sulfuric acidSolubility and freezing effects of Fe2+ and Mg2+ in H2SO4 solutions representative of upper solutions over the temperature range 200¬≠300 K. We have measured solubilities using samples of MgSO4, FeSO4√Ā

203

REPRESENTING AEROSOL DYNAMICS AND PROPERTIES IN CHEMICAL TRANSPORT MODELS BY THE METHOD OF MOMENTS.  

SciTech Connect (OSTI)

Atmospheric aerosols, suspensions of solid or liquid particles, are an important multi-phase system. Aerosols scatter and absorb shortwave (solar) radiation, affecting climate (Charlson et al., 1992; Schwartz, 1996) and visibility; nucleate cloud droplet formation, modifying the reflectivity of clouds (Twomey et al., 1984; Schwartz and Slingo, 1996) as well as contributing to composition of cloudwater and to wet deposition (Seinfeld and Pandis, 1998); and affect human health through inhalation (NRC, 1998). Existing and prospective air quality regulations impose standards on concentrations of atmospheric aerosols to protect human health and welfare (EPA, 1998). Chemical transport and transformation models representing the loading and geographical distribution of aerosols and precursor gases are needed to permit development of effective and efficient strategies for meeting air quality standards, and for examining aerosol effects on climate retrospectively and prospectively for different emissions scenarios. Important aerosol properties and processes depend on their size distribution: light scattering, cloud nucleating properties, dry deposition, and penetration into airways of lungs. The evolution of the mass loading itself depends on particle size because of the size dependence of growth and removal processes. For these reasons it is increasingly recognized that chemical transport and transformation models must represent not just the mass loading of atmospheric particulate matter but also the aerosol microphysical properties and the evolution of these properties if aerosols are to be accurately represented in these models. If the size distribution of the aerosol is known, a given property can be evaluated as the integral of the appropriate kernel function over the size distribution. This has motivated the approach of determining aerosol size distribution, and of explicitly representing this distribution and its evolution in chemical transport models.

SCHWARTZ,S.E.; MCGRAW,R.; BENKOVITZ,C.M.; WRIGHT,D.L.

2001-04-01T23:59:59.000Z

204

Uniprocessor Performance Analysis of a Representative Workload of Sandia National Laboratories' Scientific Applications.  

SciTech Connect (OSTI)

UNIPROCESSOR PERFORMANCE ANALYSIS OF A REPRESENTATIVE WORKLOAD OF SANDIA NATIONAL LABORATORIES' SCIENTIFIC APPLICATIONS Master of Science in Electrical Engineering New Mexico State University Las Cruces, New Mexico, 2005 Dr. Jeanine Cook, Chair Throughout the last decade computer performance analysis has become absolutely necessary to maximum performance of some workloads. Sandia National Laboratories (SNL) located in Albuquerque, New Mexico is no different in that to achieve maximum performance of large scientific, parallel workloads performance analysis is needed at the uni-processor level. A representative workload has been chosen as the basis of a computer performance study to determine optimal processor characteristics in order to better specify the next generation of supercomputers. Cube3, a finite element test problem developed at SNL is a representative workload of their scientific workloads. This workload has been studied at the uni-processor level to understand characteristics in the microarchitecture that will lead to the overall performance improvement at the multi-processor level. The goal of studying vthis workload at the uni-processor level is to build a performance prediction model that will be integrated into a multi-processor performance model which is currently being developed at SNL. Through the use of performance counters on the Itanium 2 microarchitecture, performance statistics are studied to determine bottlenecks in the microarchitecture and/or changes in the application code that will maximize performance. From source code analysis a performance degrading loop kernel was identified and through the use of compiler optimizations a performance gain of around 20% was achieved.

Charles Laverty

2005-10-01T23:59:59.000Z

205

Language Production General Points about Speech Production  

E-Print Network [OSTI]

Language Production #12;General Points about Speech Production 15 speech sounds per second => 2, shall I say `t' or `d'' (Levelt) Production side has gotten less attention in Psycholinguistics than the comprehension side. Evidence for speech production behaviour has until recently relied heavily on speech errors

Coulson, Seana

206

Chemical Emissions of Residential Materials and Products: Review of Available Information Preliminary Analysis of U.S. Residential  

E-Print Network [OSTI]

Chemical Emissions of Residential Materials and Products: Review of Available Information Preliminary Analysis of U.S. Residential Air Leakage Database v.2011, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents

207

Summary and comments on the month's production and injection................. Using the production table...................................................................................  

E-Print Network [OSTI]

2011 began with the posted price for 13 API gravity Midway-Sunset crude oil at $111.60 and ended.76. The July 3, 2008, price of $131.15 represents an all-time high for Midway-Sunset 13 API grav- ity crude oil Oil and Gas Production........................................................................ Using

208

Summary and comments on the month's production and injection................. Using the production table...................................................................................  

E-Print Network [OSTI]

December 2012 began with the posted price for 13 API gravity Midway-Sunset crude oil at $102.35 and ended.88. The July 3, 2008, price of $131.15 represents an all-time high for Midway-Sunset 13 API grav- ity crude oil Oil and Gas Production........................................................................ Using

209

Bonneville Purchasing Instructions. Appendix 14A, Contracting Officer`s Technical Representatives` Guide for Services Contracts.  

SciTech Connect (OSTI)

This guide outlines the duties of BPA personnel designated as Contracting Officers Technical Representatives (COTRs). The BPA Administrator gives contracting officers (COs) in BPA responsibility and authority for awarding and administering contracts. COs are authorized to designate other BPA employees to act as their representatives for purposes of contract administration, from the time of contract award until final receipt and acceptance of the contracted services. COTRs are the individuals primarily relied upon to perform technical contract administration functions. Similar functions for supply and construction contracts are performed by engineering representatives, construction inspectors, and inspectors. Although this Guide is written primarily with the COTR in mind, the concept and operation of teamwork is essential throughout the entire process of contract administration. The CO administers the contract during performance, but rarely has expertise in all of the relevant technical areas. Therefore, CO decisions rely on input from a team. The COTR is an indispensable member of that team. The instructions in this Guide are designed to facilitate this essential CO-COTR cooperation. COTR duties are usually additional to those required of the COTR in his or her assigned line organization. The COTR is still accountable to the line supervisor for performance of regularly-assigned duties. These duties are to be reflected appropriately in performance appraisals and job descriptions. For contract administration duties, however, the COTR reports directly to, and is accountable only to, the CO. The COTR`s supervisor must allow sufficient time to ensure that the COTR can adequately monitor the contract for technical compliance. This Guide is designed for COTRs who are performing service contract (including intergovernmental contract) administration functions as an adjunct to their normal technical duties.

United States. Bonneville Power Administration.

1993-07-01T23:59:59.000Z

210

Percent of Industrial Natural Gas Deliveries in Florida Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresented by the PricePrice

211

Percent of Industrial Natural Gas Deliveries in Florida Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresented by the

212

Percent of Industrial Natural Gas Deliveries in Georgia Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresented by thePrice

213

Percent of Industrial Natural Gas Deliveries in Georgia Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresented by thePricePrice

214

Percent of Industrial Natural Gas Deliveries in Hawaii Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresented by

215

Percent of Industrial Natural Gas Deliveries in Hawaii Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresented byPrice

216

Percent of Industrial Natural Gas Deliveries in Idaho Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresented byPricePrice

217

Percent of Industrial Natural Gas Deliveries in Idaho Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresented byPricePricePrice

218

Percent of Industrial Natural Gas Deliveries in Illinois Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresented

219

Percent of Industrial Natural Gas Deliveries in Illinois Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresentedPrice

220

Percent of Industrial Natural Gas Deliveries in Indiana Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresentedPricePrice

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Percent of Industrial Natural Gas Deliveries in Indiana Represented by the  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007 10,998 9,933 10,998 10,643 10,998through 1996)DecadeYear Jan Feb MarPriceRepresentedPricePricePrice

222

Sampling device for withdrawing a representative sample from single and multi-phase flows  

DOE Patents [OSTI]

A fluid stream sampling device has been developed for the purpose of obtaining a representative sample from a single or multi-phase fluid flow. This objective is carried out by means of a probe which may be inserted into the fluid stream. Individual samples are withdrawn from the fluid flow by sampling ports with particular spacings, and the sampling parts are coupled to various analytical systems for characterization of the physical, thermal, and chemical properties of the fluid flow as a whole and also individually.

Apley, Walter J. (Pasco, WA); Cliff, William C. (Richland, WA); Creer, James M. (Richland, WA)

1984-01-01T23:59:59.000Z

223

Biological production of products from waste gases  

DOE Patents [OSTI]

A method and apparatus are designed for converting waste gases from industrial processes such as oil refining, and carbon black, coke, ammonia, and methanol production, into useful products. The method includes introducing the waste gases into a bioreactor where they are fermented to various products, such as organic acids, alcohols, hydrogen, single cell protein, and salts of organic acids by anaerobic bacteria within the bioreactor. These valuable end products are then recovered, separated and purified.

Gaddy, James L. (Fayetteville, AR)

2002-01-22T23:59:59.000Z

224

Covered Product Category: Cool Roof Products  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance across a variety of product categories, including cool roof products, which are an ENERGY STARģ-qualified product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

225

Comparison of surface meteorological data representativeness for the Weldon Spring transport and dispersion modeling analysis  

SciTech Connect (OSTI)

The US Department of Energy is conducting the Weldon Spring Site Remedial Action Project under the Surplus Facilities Management Program (SFMP). The major goals of the SFMP are to eliminate potential hazards to the public and the environment that associated with contamination at SFMP sites and to make surplus property available for other uses to the extent possible. This report presents the results of analysis of available meteorological data from stations near the Weldon Spring site. Data that are most representative of site conditions are needed to accurately model the transport and dispersion of air pollutants associated with remedial activities. Such modeling will assist the development of mitigative measures. 17 refs., 12 figs., 6 tabs.

Lazaro, M.

1989-06-01T23:59:59.000Z

226

Identification and use of surrogate precursors to represent delayed neutron groups  

SciTech Connect (OSTI)

Time-dependent delayed neutron activities have traditionally been represented by six delayed neutron precursor groups, whose yields and decay constants are obtained from nonlinear least-squares fits to out-of-pile measurements. The group decay constants obtained in this manner are empirical. They do not coincide with decay constants of specific delayed neutron precursors. Different values are used for each fissionable nuclide, and the values used also depend on the energy spectrum of the neutrons causing fission. Having a different value of the six-group decay constants for each fissionable nuclide complicates the analysis of the dynamic behavior of fast reactors. A fast reactor containing six principal fissioning nuclides of uranium and plutonium must, in effect, be described by 36 delayed neutron groups. The use of group decay constants that depend on the neutron energy spectrum makes it difficult to select values that describe the dynamic response of epithermal systems because virtually all delayed neutron activity measurements have been performed for fast or thermal spectra. Clearly, it would be desirable to have a single set of group decay constants that could be applied to all fissionable nuclei. A set of seven fixed decay constants is associated with a specific, dominant delayed neutron precursor. In effect, each group is represented by a single surrogate precursor. Using recently measured delayed neutron activities for {sup 235}U and {sup 237}Np, the proposed set of decay constants actually improved the fit to the data. For other fissionable nuclei, a method has been devised to obtain yields consistent with the proposed set of decay constants from the traditional six-group parameters. This transformation is accomplished without altering the inferred reactivity scale.

Loaiza, D.J. [Los Alamos National Lab., NM (United States); Haskin, F.E. [Univ. of New Mexico, Albuquerque, NM (United States)

1998-09-01T23:59:59.000Z

227

A Subbasin-based framework to represent land surface processes in an Earth System Model  

SciTech Connect (OSTI)

Realistically representing spatial heterogeneity and lateral land surface processes within and between modeling units in earth system models is important because of their implications to surface energy and water exchange. The traditional approach of using regular grids as computational units in land surface models and earth system models may lead to inadequate representation of lateral movements of water, energy and carbon fluxes, especially when the grid resolution increases. Here a new subbasin-based framework is introduced in the Community Land Model (CLM), which is the land component of the Community Earth System Model (CESM). Local processes are represented assuming each subbasin as a grid cell on a pseudo grid matrix with no significant modifications to the existing CLM modeling structure. Lateral routing of water within and between subbasins is simulated with the subbasin version of a recently-developed physically based routing model, Model for Scale Adaptive River Routing (MOSART). As an illustration, this new framework is implemented in the topographically diverse region of the U.S. Pacific Northwest. The modeling units (subbasins) are delineated from high-resolution Digital Elevation Model while atmospheric forcing and surface parameters are remapped from the corresponding high resolution datasets. The impacts of this representation on simulating hydrologic processes are explored by comparing it with the default (grid-based) CLM representation. In addition, the effects of DEM resolution on parameterizing topography and the subsequent effects on runoff processes are investigated. Limited model evaluation and comparison showed that small difference between the averaged forcing can lead to more significant difference in the simulated runoff and streamflow because of nonlinear horizontal processes. Topographic indices derived from high resolution DEM may not improve the overall water balance, but affect the partitioning between surface and subsurface runoff. More systematic analyses are needed to determine the relative merits of the subbasin representation compared to the commonly used grid-based representation, especially when land surface models are approaching higher resolutions.

Tesfa, Teklu K.; Li, Hongyi; Leung, Lai-Yung R.; Huang, Maoyi; Ke, Yinghai; Sun, Yu; Liu, Ying

2014-05-20T23:59:59.000Z

228

Worker productivity rises with energy efficiency  

SciTech Connect (OSTI)

Many American companies have found that saving energy and cutting pollution dramatically improves the bottom line. But beyond these gains, businesses that launch energy efficiency programs to save money are often astonished to discover unforeseen benefits: energy efficient lighting, heating, cooling, motors, and industrial processes can increase worker productivity, decrease absenteeism, and improve the quality of work performed. Profits created by the jump in worker productivity can exceed energy savings by a factor of ten. Energy efficiency and pollution prevention represent the next wave in manufacturing, following the quality revolution launched by the Japanese in the 1960s. Unless America leads the lean and clean revolution, economic health will be undermined as other countries develop clean processes and products and US companies suffer competitively. Also, developing countries will leapfrog their wasteful model and buy products and manufacturing processes from foreign firms already practicing lean and clean.

Romm, J.J. (Dept. of Energy, Washington, DC (United States))

1995-01-01T23:59:59.000Z

229

Hyperon Production with CLAS and CLAS12  

SciTech Connect (OSTI)

Hadron spectroscopy and baryon spectroscopy in particular represents a large part of the experimental program with CLAS at Jefferson Lab. Within this program a substantial amount of data on hyperon production and properties has been accumulated. This includes photo- and electro-production of {Lambda} and {Sigma} hyperons and their excited states and also {Xi} hyperons. Some of the highlights of this program will be presented together with plans to extend this program with CLAS12 after CEBAF upgrade to 12 GeV.

Eugene Pasyuk

2012-12-01T23:59:59.000Z

230

Success in Online Production Systems: A Longitudinal Analysis of the Socio-  

E-Print Network [OSTI]

1 Success in Online Production Systems: A Longitudinal Analysis of the Socio- Technical Duality Mellon University 2 IBM Research ABSTRACT Online production systems represent a new and innovative of those dimensions impact the suc- cess of online production systems. We collected data from the open

231

ORNL/TM-2007/183 Exploring Potential U.S. Switchgrass Production  

E-Print Network [OSTI]

ORNL/TM-2007/183 Exploring Potential U.S. Switchgrass Production for Lignocellulosic Ethanol August of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service

Pennycook, Steve

232

Aesculap, Inc. Air Products  

E-Print Network [OSTI]

Aesculap, Inc. Air Products Air Products Foundation Alaric Compliance Services, LLC Alvin H. Butz & Herger, Inc. Sodexo Campus Services Sodexo Inc. and Affiliates Stupp Bros., Inc. Sugarbush Products, Inc

Napier, Terrence

233

By-Products Utilization  

E-Print Network [OSTI]

in a variety of rubber and plastic products, thermal incineration of waste tires for production of electricity rubber in asphalt mixes, (ii) thermal incineration of worn-out tires for the production of electricity

Wisconsin-Milwaukee, University of

234

Spatial Data Structures Spatial data structures describe the rules that are used to represent geographic data in geographic  

E-Print Network [OSTI]

Spatial Data Structures Spatial data structures describe the rules that are used to represent depending on those beneath it: · Conceptual spatial data models describe how geographic objects (for example, rivers) or phenomena are represented in GIS. · Logical spatial data models describe how geographic data

Stock, Kristin

235

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may of the environmental, economic, and social impact of engineering work. #12;Note: This syllabus may represent a past and project overview Syllabus introduction Introductions Assignment introductions: · Sustainability project

236

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may management project OR 55% Due Week 8b #12;Note: This syllabus may represent a past offering of this course - Cultural adaptation WEEK 3A ­ JULY 5TH Localization Engineering and Tools #12;Note: This syllabus may

237

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may with empirical research. #12;Note: This syllabus may represent a past offering of this course and future course of this syllabus) and short "discussion idea" postings to the course blog in order to stimulate discussion about

238

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may Role plays and simulations Short speeches and presentations #12;Note: This syllabus may represent Introduction to HCDE 461: syllabus, goals, rules, and tips to success Warm-up activities: Self

239

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may.9 ­ 1.1 D 0.7 ­ 0.8 D- 0.0 E #12;Note: This syllabus may represent a past offering of this course

240

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may for a small system and plan and perform a usability evaluation #12;Note: This syllabus may represent a past in UCD Week 11 Project Presentations L11: Course Wrap-Up Finals Online Final Exam #12;Note: This syllabus

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may%) 15% #12;Note: This syllabus may represent a past offering of this course and future course offerings Introduction, Overview Syllabus review Introductions User-Centered Design Requirements 2 Ways of Thinking About

242

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may reading 5% Participation in discussion 10% ____________ 100% #12;Note: This syllabus may represent a past (2) --- HW: Summary (2) due Mon. 9:00 a.m.; Prep. for mini-presentation (2) #12;Note: This syllabus

243

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future/Wednesdays Course URL: http://faculty.washington.edu/farkas/TC407/syllabus.html Course Description will be deducted for not posting. #12;Note: This syllabus may represent a past offering

244

Abstract--A study determined people's perceptions of many types of managed and unmanaged landscapes as represented on slides.  

E-Print Network [OSTI]

landscapes as represented on slides. In scenes of arid lands in the western United States, most respon- dents of respondentswereshown sets of color slides that illustrated various landscape com- ponents, structures, and management actions throughout the western United States. Slide sets represented objects photographed from fixed

245

from Isotope Production Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Cancer-fighting treatment gets boost from Isotope Production Facility April 13, 2012 Isotope Production Facility produces cancer-fighting actinium 2:32 Isotope cancer treatment...

246

Containment and Analysis Capability Insights Gained from Drop Testing Representative Spent Nuclear Fuel Containers  

SciTech Connect (OSTI)

The National Spent Nuclear Fuel Program (NSNFP), operating from the Idaho National Engineering and Environmental Laboratory (INEEL), developed the standardized Department of Energy (DOE) spent nuclear fuel (SNF) canister. This canister is designed to be loaded with DOE SNF (including other radioactive materials) and then be used during interim storage, during transportation to the nationís repository, and for final disposal at the repository without having to be reopened. The canister has been fully designed and has completed significant testing that clearly demonstrates that it can safely achieve its intended design goals. During 1999, nine 457-mm diameter test canisters were fabricated at the INEEL to represent the standardized DOE SNF canister design. Various "worst case" internals were incorporated. Seven of the test canisters were 4.57 m long and weighed approximately 2721 kg, while two were 3.00 m long and weighed approximately 1360 kg and 1725 kg. Seven of the test canisters were dropped from 9 m onto an essentially unyielding flat surface and one of the test canisters was dropped from 1 m onto a 15-cm diameter puncture post. The final test canister was dropped from 61 cm onto a 50.8 mm thick vertically oriented steel plate, and then fell over to impact another 50.8 mm thick vertically oriented steel plate. This last test represented a canister dropping onto another larger container such as a repository disposal container or waste package. The 1999 drop testing was performed at Sandia National Laboratories (SNL). The nine test canisters experienced varying degrees of damage to their skirts, lifting rings, and pressure boundary components (heads and main body). However, all of the canisters were shown to have maintained their pressure boundary (through pressure testing). Four heavily damaged canisters were also shown to be leaktight via helium leak testing. Pre- and post-drop finite element (FE) analyses were also performed. The results clearly indicated that accurate predictions of canister responses to the drop tests were achieved. The results achieved for the standardized canister can also be applicable to other well-constructed containers (canisters, casks, cans, vessels, etc.) subjected to similar loads. Properly designed containers can maintain a containment system after being subjected to dynamically induced high strains and FE computer analyses can accurately predict the resulting responses.

Morton, Dana Keith; Snow, Spencer David; Rahl, Tommy Ervin; Ware, Arthur Gates

2001-08-01T23:59:59.000Z

247

Risk comparisons based on representative source terms with the NUREG-1150 results  

SciTech Connect (OSTI)

Standardized source terms, based on a specified release of fission products during potential accidents at commercial light water nuclear reactors, have been used for a long time for regulatory purposes. The siting of nuclear power plants, for example, which is governed by Part 100 of the Code of Federal Regulations Title 10, has utilized the source term recommended in TID-14844 supplemented by Regulatory Guides 1.3 and 1.4 and the Standard Review Plan. With the introduction of probabilistic risk assessment (PRA) methods, the source terms became characterized not only by the amount of fission products released, but also by the probability of the release. In the Reactor Safety Study, for example, several categories of source terms, characterized by release severity and probability, were developed for both pressurized and boiling water reactors (PWRs and BWRs). These categories were based on an understanding of the likely paths and associated phenomenology of accident progression following core damage to possible failure of the containment and release to the environment.

Mubayi, V.; Davis, R.E.; Hanson, A.L.

1993-12-01T23:59:59.000Z

248

Incipient toxicity of lithium to freshwater organisms representing a salmonid habitat  

SciTech Connect (OSTI)

Because the eventual development of fusion power reactors could increase the mining, use and disposal of lithium five-fold by the year 2000, potential effects from unusual amounts of lithium in aquatic environments were investigated. Freshwater oganisms representing a Pacific Northwest salmonid habitat were exposed to elevated conentrations of lithium. Nine parameters were used to determine the incipient toxicity of lithium to rainbow trout (Salmo gairdneri), insect larvae (Chironomus sp.), and Columbia River periphyton. All three groups of biota were incipiently sensitive to lithium at concentrations ranging between 0.1 and 1 mg/L. These results correspond with the incipient toxicity of beryllium, a chemically similar component of fusion reactor cores. A maximum lithium concentration of 0.01 mg/L occurs naturally in most freshwater environments (beryllium is rarer). Therefore, a concentration range of 0.01 to 0.1 mg/L may be regarded as approaching toxic concentrations when assessing the hazards of lithium in freshwaters.

Emery, R.; Klopfer, D.C.; Skalski, J.R.

1981-07-01T23:59:59.000Z

249

A Control Chart Approach for Representing and Mining Data Streams with Shape Based Similarity  

SciTech Connect (OSTI)

The mining of data streams for online condition monitoring is a challenging task in several domains including (electric) power grid system, intelligent manufacturing, and consumer science. Considering a power grid application in which thousands of sensors, called the phasor measurement units, are deployed on the power grid network to continuously collect streams of digital data for real-time situational awareness and system management. Depending on design, each sensor could stream between ten and sixty data samples per second. The myriad of sensory data captured could convey deeper insights about sequence of events in real-time and before major damages are done. However, the timely processing and analysis of these high-velocity and high-volume data streams is a challenge. Hence, a new data processing and transformation approach, based on the concept of control charts, for representing sequence of data streams from sensors is proposed. In addition, an application of the proposed approach for enhancing data mining tasks such as clustering using real-world power grid data streams is presented. The results indicate that the proposed approach is very efficient for data streams storage and manipulation.

Omitaomu, Olufemi A [ORNL] [ORNL

2014-01-01T23:59:59.000Z

250

Identifying Webpage Regions and Their Roles by Combining Image Processing and Markup Analysis  

E-Print Network [OSTI]

The World Wide Web is today a powerhouse of information. Webpages are an essential constituent of the web. Each of these webpages comprises of various regions, which are visual chunks containing one or more elements. In general, a region of a webpage... method that we have used is based on Edge Detection Ė an Image Processing based technique to detect areas in images with sudden change in 9 Figure 3. Work flow of the proposed method 10 brightness. It reduces the amount of data...

Singh, Sanjeev Kumar

2014-05-22T23:59:59.000Z

251

An Analysis of Price Determination and Markups in the Air-Conditioning and Heating Equipment Industry  

SciTech Connect (OSTI)

In this report we calculate the change in final consumer prices due to minimum efficiency standards, focusing on a standard economic model of the air-conditioning and heating equipment (ACHE) wholesale industry. The model examines the relationship between the marginal cost to distribute and sell equipment and the final consumer price in this industry. The model predicts that the impact of a standard on the final consumer price is conditioned by its impact on marginal distribution costs. For example, if a standard raises the marginal cost to distribute and sell equipment a small amount, the model predicts that the standard will raise the final consumer price a small amount as well. Statistical analysis suggest that standards do not increase the amount of labor needed to distribute equipment the same employees needed to sell lower efficiency equipment can sell high efficiency equipment. Labor is a large component of the total marginal cost to distribute and sell air-conditioning and heating equipment. We infer from this that standards have a relatively small impact on ACHE marginal distribution and sale costs. Thus, our model predicts that a standard will have a relatively small impact on final ACHE consumer prices. Our statistical analysis of U.S. Census Bureau wholesale revenue tends to confirm this model prediction. Generalizing, we find that the ratio of manufacturer price to final consumer price prior to a standard tends to exceed the ratio of the change in manufacturer price to the change in final consumer price resulting from a standard. The appendix expands our analysis through a typical distribution chain for commercial and residential air-conditioning and heating equipment.

Dale, Larry; Millstein, Dev; Coughlin, Katie; Van Buskirk, Robert; Rosenquist, Gregory; Lekov, Alex; Bhuyan, Sanjib

2004-01-30T23:59:59.000Z

252

Microsoft Word - STG Notes 7-18-06 awt markup 7-25-06.doc  

Broader source: Energy.gov (indexed) [DOE]

(WIEB), Sarah Wochos (CSGMW), Christina Nelson (NCSL), Cloyce Brackett (SSEB), Conrad Smith (CSGNE), Don Flater (CSGMW), Bob Fronczak (AAR), Larry Stern (CVSA), Michele Sampson...

253

Legacy Computing Markup Language (LCML) and LEGEND -- LEGacy Encapsulation for Network Distribution  

E-Print Network [OSTI]

The rapid increase of computing power and emergence of distributed computing technologies such as Grid computing create new opportunities for scientific computing. One of the challenges faced in harnessing the emerging ...

Geiger, Stephen Kurt

2004-01-01T23:59:59.000Z

254

CONGRESSMAN SHERWOOD BOEHLERT (R-NY) OPENING STATEMENT FOR ENERGY MARK-UP  

E-Print Network [OSTI]

-deep drilling program and landmark compromise on the Clean Coal Program to ensure that it actually leads to true

255

Microsoft Word - AEO2012 SENR final markup 1 31 12 _2_.docx  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S i DOE Tribal Leader HOWARD GRUENSPECHTSecuringAudits HOWARD

256

Microsoft Word - TGD Markup 3-25-05 the end.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment SurfacesResource Program Preliminary Needs Assessment0 THERMAL ANALYSIS OF BPA

257

Microsoft Word - Edit copy DOE Ph.1.ReportTRNKJN markup Dec.31.doc  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: Crystal structureComposite--FORRemarksHEATINGI _FinalFinalSBIR Grant

258

Farm-level simulation of alternative resource-conserving production systems for representative crop farms in the Northern Texas High Plains  

E-Print Network [OSTI]

irrigated and dryland conditions, and sprinkler irrigation with and without a low energy precision application (LEPA) system. With dryland conditions, participation in the Conservation Reserve Program was evaluated. Farm situations werc. simulated over a... farm program provisions. This latter assumption was adopted in order to assess potential of alternative crop rotations. ACKNOWLEDGEMENTS I express my sincere appreciation to Dr. James W. Richardson, my advisor and chairman of the committee...

De Brey, Cristobal J.

1991-01-01T23:59:59.000Z

259

Meats & Products Agricultural Inputs  

E-Print Network [OSTI]

Meats & Products Agricultural Inputs Processing Idaho B20 C C B Meats and Livestock Products Index to agriculture? Legend Overall weighted grade Weighted rank Northwest Midwest Southwest East Meats & ProductsProcessingessing Maine B11 B A A Meats & Products Agricultural Inputs Processing New York F49 F F F soductsoducts

Collett Jr., Jeffrey L.

260

Volume 4: Characterization of representative reservoirs -- Gulf of Mexico field, U-8 reservoir  

SciTech Connect (OSTI)

A reservoir study was performed using a publicly available black oil simulator to history match and predict the performance of a Gulf of Mexico reservoir. The first objective of this simulation study was to validate the Black Oil Applied Simulation Tool version three for personal computers (BOAST3-PC) model to ensure the integrity of the simulation runs. Once validation was completed, a field history match for the Gulf of Mexico U-8 oil reservoir was attempted. A verbal agreement was reached with the operator of this reservoir to blindcode the name and location of the reservoir. In return, the operator supplied data and assistance in regards to the technical aspects of the research. On the basis of the best history match, different secondary recovery techniques were simulated as a predictive study for enhancing the reservoir productivity.

Koperna, G.J. Jr.; Johnson, H.R. [BDM Federal, Inc., McLean, VA (United States); Salamy, S.P.; Reeves, T.K. [BDM-Oklahoma, Inc., Bartlesville, OK (United States); Sawyer, W.K. [Mathematical and Computer Services, Inc., Danville, VA (United States); Kimbrell, W.C.; Schenewerk, P.A. [Louisiana State Univ., Baton Rouge, LA (United States). Dept. of Petroleum Engineering

1998-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Analysis of Alternative Extensions of the Existing Production Tax Credit for Wind Generators  

Reports and Publications (EIA)

Requestor: Ms. Janice Mays, Chief Counsel, Committee on Ways & Means, U.S. House of Representatives This is a letter response requesting analysis of alternative extensions of the existing production tax credit (PTC) that would apply to wind generators only.

2007-01-01T23:59:59.000Z

262

Commonality in complex product families : implications of divergence and lifecycle offsets  

E-Print Network [OSTI]

Commonality, or the sharing of components, processes, technologies, interfaces and/or infrastructure across a product family, represents one of many potential tools for increasing corporate profitability. Industrial interest ...

Boas, Ryan C

2008-01-01T23:59:59.000Z

263

Systematic Single-Cell Analysis of Pichia pastoris Reveals Secretory Capacity Limits Productivity  

E-Print Network [OSTI]

Biopharmaceuticals represent the fastest growing sector of the global pharmaceutical industry. Cost-efficient production of these biologic drugs requires a robust host organism for generating high titers of protein during ...

Love, Kerry Routenberg

264

A crossed product of the CAR algebra in the Cuntz algebra  

E-Print Network [OSTI]

In this paper we show that the Cuntz algebra can be represented as a C*-crossed product by endomorphism of the canonical anticommutation relations (CAR) algebra, generated by the standard recursive fermion system.

Marat Aukhadiev; Alexander Nikitin; Airat Sitdikov

2014-04-02T23:59:59.000Z

265

Effect of control frequency on the performance of manufacturing systems with controllable production rates  

E-Print Network [OSTI]

Flow-line manufacturing systems represent the most prevalent process structure in industry for the repetitive production of discrete items. Machine breakdowns, however, limit their reliability and efficiency. The control ...

CastaŮeda Vega, Josť Israel

2001-01-01T23:59:59.000Z

266

Invitation to our Design Trade Show Managing New Product Design: Design Theory and Methods  

E-Print Network [OSTI]

disciplines from UC Berkeley and the Autonomous University of Mexico City (UNAM are grateful for our coaches this year, including representatives of 44 Energy and productivity and is sponsored by theDesignExchange. 4. Bevolution - A sustainable, user

Agogino, Alice M.

267

Integrated Photo-Bioelectrochemical System for Contaminants Removal and Bioenergy Production  

E-Print Network [OSTI]

cycling. INTRODUCTION Municipal wastewater treatment plants play a critical role in environmental represents an important, electricity-demanding step in most municipal wastewater treatment facilities fuel cells (MFCs)3 with algal bioreactors4 for wastewater treatment and bioenergy production. MFCs

Berges, John A.

268

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may the original total point value. Work more than 5 days late will receive zero credit. #12;Note: This syllabus

269

Alpha Hemolysin: Inventory and Record Keeping On February 9, 2006, our laboratory was represented before the Microbiological Safety  

E-Print Network [OSTI]

Alpha Hemolysin: Inventory and Record Keeping On February 9, 2006, our laboratory was represented at all times. An accurate and up-to-date inventory of HL will be provided to EHO at least annually

Movileanu, Liviu

270

Prevalence of exposure to violence and PTSD symptoms in middle income undergraduate students representing three ethnic groups  

E-Print Network [OSTI]

PREVALENCE OF EXPOSURE TO VIOLENCE AND PTSD SYMPTOMS IN MIDDLE INCOME UNDERGRADUATE STUDENTS REPRESENTING THREE ETHNIC GROUPS A Thesis by ANITA KAY MCGRUDER Submitted to the Office of Graduate Studies of Texas A&M University in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE May 1995 Major Subject: Psychology PREVALENCE OF EXPOSURE TO VIOLENCE AND PTSD SYMPTOMS IN MIDDLE INCOME UNDERGRADUATE STUDENTS REPRESENTING THREE ETHNIC GROUPS A Thesis by ANITA KAY...

McGruder, Anita Kay

1995-01-01T23:59:59.000Z

271

Development of a Future Representative Concentration Pathway for Use in the IPCC 5th Assessment Earth System Model Simulations  

SciTech Connect (OSTI)

The representative concentration pathway to be delivered is a scenario of atmospheric concentrations of greenhouse gases and other radiatively important atmospheric species, along with land-use changes, derived from the Global Change Assessment Model (GCAM). The particular representative concentration pathway (RCP) that the Joint Global Change Research Institute (JGCRI) has been responsible for is a not-to-exceed pathway that stabilizes at a radiative forcing of 4.5Wm-2 in the year 2100.

None

2010-12-29T23:59:59.000Z

272

By Earle B. Amey Tungsten's unique high-temperature properties are beneficial The Office of the United States Trade Representative  

E-Print Network [OSTI]

of tungsten ore concentrates and products with that of 1994. Demand generally increased in the cemented from products under these tariffs. during 1995. During 1995, prices for tungsten concentrates, which had built from 1985). Major Domestic production data for tungsten were developed by the liquidation of both

273

Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production  

E-Print Network [OSTI]

#12;Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward

Narasayya, Vivek

274

PRODUCT REPRESENTATION IN LIGHTWEIGHT FORMATS FOR PRODUCT LIFECYCLE MANAGEMENT (PLM)  

E-Print Network [OSTI]

PRODUCT REPRESENTATION IN LIGHTWEIGHT FORMATS FOR PRODUCT LIFECYCLE MANAGEMENT (PLM) Lian Ding environments and the entire product lifecycle. There are new requirements for product representations, including: platform/application independence, support for the product lifecycle, rapidly sharing information

Rzepa, Henry S.

275

A Hydro-Economic Approach to Representing Water Resources Impacts in Integrated Assessment Models  

SciTech Connect (OSTI)

Grant Number DE-FG02-98ER62665 Office of Energy Research of the U.S. Department of Energy Abstract Many Integrated Assessment Models (IAM) divide the world into a small number of highly aggregated regions. Non-OECD countries are aggregated geographically into continental and multiple-continental regions or economically by development level. Current research suggests that these large scale aggregations cannot accurately represent potential water resources-related climate change impacts. In addition, IAMs do not explicitly model the flow regulation impacts of reservoir and ground water systems, the economics of water supply, or the demand for water in economic activities. Using the International Model for Policy Analysis of Agricultural Commodities and Trade (IMPACT) model of the International Food Policy Research Institute (IFPRI) as a case study, this research implemented a set of methodologies to provide accurate representation of water resource climate change impacts in Integrated Assessment Models. There were also detailed examinations of key issues related to aggregated modeling including: modeling water consumption versus water withdrawals; ground and surface water interactions; development of reservoir cost curves; modeling of surface areas of aggregated reservoirs for estimating evaporation losses; and evaluating the importance of spatial scale in river basin modeling. The major findings include: - Continental or national or even large scale river basin aggregation of water supplies and demands do not accurately capture the impacts of climate change in the water and agricultural sector in IAMs. - Fortunately, there now exist gridden approaches (0.5 X 0.5 degrees) to model streamflows in a global analysis. The gridded approach to hydrologic modeling allows flexibility in aligning basin boundaries with national boundaries. This combined with GIS tools, high speed computers, and the growing availability of socio-economic gridded data bases allows assignment of demands to river basins to create hydro-economic zones that respect as much as possible both political and hydrologic integrity in different models. - To minimize pre-processing of data and add increased flexibility to modeling water resources and uses, it is recommended that water withdrawal demands be modeled, not consumptive requirements even though this makes the IAM more complex. - IAMs must consider changes in water availability for irrigation under climate change; ignoring them is more inaccurate than ignoring yield changes in crops under climate change. - Determining water availability and cost in river basins must include modeling streamflows, reservoirs and their operations, and ground water and its interaction with surface water. - Scale issues are important. The results from condensing demands and supplies in a large complex river basin to one node can be misleading for all uses under low flow conditions and instream flow uses under all conditions. Monthly is generally the most accurate scale for modeling river flows and demands. Challenges remain in integrating hydrologic units with political boundaries but the gridded approach to hydrologic modeling allows flexibility in aligning basin boundaries with political boundaries. - Using minimal reservoir cost data, it is possible to use basin topography to estimate reservoir storage costs. - Reservoir evaporation must be considered when assessing the usable water in a watershed. Several methods are available to estimate the relationship between aggregated storage surface area and storage volume. - For existing or future IAMs that can not use the appropriate aggregation for water, a water preprocessor may be required due the finer scale of hydrologic impacts.

Kirshen, Paul H.; Strzepek, Kenneth, M.

2004-01-14T23:59:59.000Z

276

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization DRAFT REPORT CARBON DIOXIDE SEQUESTRATION IN CEMENTITIOUS-MILWAUKEE #12;CARBON DIOXIDE SEQUESTRATION IN CEMENTITIOUS PRODUCTS Progress Report by Tarun R. Naik, Rakesh of Carbon Dioxide Sequestration Technologies

Wisconsin-Milwaukee, University of

277

Productivity & Energy Flow  

E-Print Network [OSTI]

1 Productivity & Energy Flow Ecosystem approach, focuses: on flow of energy, water, and nutrients (capture) of energy by autotrophs Gross (total) Net (total ­ costs) Secondary productivity- capture of energy by herbivores http://sciencebitz.com/?page_id=204 What Controls the Primary Productivity

Mitchell, Randall J.

278

By-Products Utilization  

E-Print Network [OSTI]

combustion by-products #12;3 generated by using both conventional and clean-coal technologies. A clean-coal that obtained from clean-coal technology, are not utilized in cast-concrete masonry products (bricks, blocksCenter for By-Products Utilization RECENT ADVANCES IN RECYCLING CLEAN- COAL ASH By Tarun R. Naik

Wisconsin-Milwaukee, University of

279

Hydrogen Production CODES & STANDARDS  

E-Print Network [OSTI]

Hydrogen Production DELIVERY FUEL CELLS STORAGE PRODUCTION TECHNOLOGY VALIDATION CODES & STANDARDS for 2010 · Reduce the cost of distributed production of hydrogen from natural gas and/or liquid fuels to $1 SYSTEMS INTEGRATION / ANALYSES SAFETY EDUCATION RESEARCH & DEVELOPMENT Economy Pete Devlin #12;Hydrogen

280

Strangeness Production at COSY  

E-Print Network [OSTI]

The paper gives an overview of strangeness-production experiments at the Cooler Synchrotron COSY. Results on kaon-pair and phi meson production in pp, pd and dd collisions, hyperon-production experiments and Lambda p final-state interaction studies are presented.

Frank Hinterberger; Hartmut Machner; Regina Siudak

2010-10-08T23:59:59.000Z

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization USE OF CLEAN-COAL ASH FOR MANAGING ASR By Zichao Wu and Tarun R College of Engineering and Applied Science THE UNIVERSITY OF WISCONSIN­MILWAUKEE #12;USE OF CLEAN-COAL ASH combustion by-products (such as clean-coal ash) from power plants. Maximum recycling of such by- products

Wisconsin-Milwaukee, University of

282

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization USE OF CLASS F FLY ASH AND CLEAN-COAL ASH BLENDS FOR CAST OF CLASS F FLYASHAND CLEAN-COAL ASHBLENDS FOR CAST CONCRETE PRODUCTS Authors: TarunR.Naik, Director, Center,Illinois Clean Coal Institute RudolphN.Kraus, Research Associate, UWM Center forBy-Products Utilization Shiw S

Wisconsin-Milwaukee, University of

283

Product Designation Process  

Broader source: Energy.gov [DOE]

The process for designating products was developed to maximize energy savings within Federal agencies, which are required by law to purchase products designated by the Federal Energy Management Program (FEMP) or qualified by ENERGY STAR. Products that meet FEMP-designated efficiency requirements are in the upper 25% of their class in energy efficiency.

284

Covered Product Categories  

Broader source: Energy.gov [DOE]

Federal agencies are required by law to purchase products that are designated by the Federal Energy Management Program (FEMP-designated) or qualified by ENERGY STAR. Choose a product category for information about purchasing, installing, and using energy-efficient products.

285

MECO Production Target Developments  

E-Print Network [OSTI]

be reoptimized Tungsten target Simulations of design parameters with GEANT3 indicate that both production targetMECO Production Target Developments James L. Popp University of California, Irvine NuFact'03 Columbia, June, 2003 #12;June, 2003J.L.Popp, UCI MECO Production Target 2 MECO Collaboration Institute

McDonald, Kirk

286

International Conference of Modeling and Simulation -MOSIM'10 -May 10-12, 2010 -Hammamet -Tunisia "Evaluation and optimization of innovative production systems of goods and services"  

E-Print Network [OSTI]

- Tunisia "Evaluation and optimization of innovative production systems of goods and services" CONSISTENCY Factory aims to design, simulate and optimize the production system as early as possible in the product a framework based on a set of multi-layered models representing a production system at the different necessary

Paris-Sud XI, Université de

287

For the designers, nature is the nucleus represented by the pond, moving gradually away from nature leads though a large open space towards the solar field, representing man-made technology.  

E-Print Network [OSTI]

from nature leads though a large open space towards the solar field, representing man-made technology to technology. In our design, the pond is a representation of nature, while the solar field on the extreme side is a representation of the man-made technology. We provide a connection between these two opposite concepts and offer

Goodman, Robert M.

288

Product development practices that matter  

E-Print Network [OSTI]

Product Development consists of activities to transforms a market opportunity and technological innovation into successful products. Several waves of improvements in technological innovation and product development have ...

Gupta, Nisheeth

2010-01-01T23:59:59.000Z

289

Wood Products 201213 Student Handbook  

E-Print Network [OSTI]

Wood Products 201213 Student Handbook Ecosystem Science and Management College ........................................................................................................................... 2 Wood Products Undergraduate Program ...................................................................................................................................................... 3 Careers for Wood Products Majors

Boyer, Elizabeth W.

290

Choosing Breeds for Commercial Beef Production.  

E-Print Network [OSTI]

characteristics which have a marked effect on most production traits are mature body size and level of milking potential. Other indicators that may be important are muscle expression, or lean-to fat ratio, and rate of maturity or age of puberty. A final... factor which may be important, especially in the South, is the biological species represented in the breed. Mature Body Size As mature body size increases so does size at any stage of life. Larger mature size is often associated with later maturity...

Hammack, Stephen P.

1986-01-01T23:59:59.000Z

291

Wave Power Resources off the Hawaiian Islands luisvega@hawaii.edu Wave Resources for Representative Sites Around the Hawaiian Islands  

E-Print Network [OSTI]

Wave Power Resources off the Hawaiian Islands luisvega@hawaii.edu 1 Wave Resources for Representative Sites Around the Hawaiian Islands Table of Contents Summary p2 Background: Wave Power Conversion p3 Licensing and Permitting p3 Challenges and Barriers p4 Wave Power Resources: Previous Work p5 Wave

292

Representing the effects of alpine grassland vegetation cover on the simulation of soil thermal dynamics by ecosystem  

E-Print Network [OSTI]

hourly time steps, soil surface temperature is calculated by iteratively solving the energy balanceRepresenting the effects of alpine grassland vegetation cover on the simulation of soil thermal] Soil surface temperature is a critical boundary condition for the simulation of soil temperature

Ickert-Bond, Steffi

293

Confrence TALN 1999, Cargse, 12-17 juillet 1999 1 Representing speech acts as events to treat dialogue  

E-Print Network [OSTI]

Conférence TALN 1999, Cargèse, 12-17 juillet 1999 1 Representing speech acts as events to treat the way in which formal semantics such as SDRT (Asher, 1993) treat dialogue. We point out that SDRT offers at a semantic level, treating dia- logue cannot be done in a context-free way. Specifically, we show how

Boyer, Edmond

294

Greening the U.S. House of Representatives Rick Diamond and Christopher Payne, Lawrence Berkeley National Laboratory  

E-Print Network [OSTI]

of making the U.S. House of Representatives: 1) carbon neutral within 18 months, 2) reducing energy use system. A key aspect has been better tracking and feedback to the building operators of the actual energy is under House jurisdiction #12;3 Energy Consumption for the House Buildings Energy is supplied

295

Using Representative-Based Clustering for Nearest Neighbor Dataset Editing Christoph F. Eick , Nidal Zeidat, and Ricardo Vilalta  

E-Print Network [OSTI]

Using Representative-Based Clustering for Nearest Neighbor Dataset Editing Christoph F. Eick, vilalta}@cs.uh.edu Abstract The goal of dataset editing in instance-based learning is to remove objects-based clustering algorithms for nearest neighbor dataset editing. We term this approach supervised clustering

Vilalta, Ricardo

296

Thomas and Mack Concourse Take time before Career Day to find out which companies are represented. Go to the Career  

E-Print Network [OSTI]

Thomas and Mack Concourse Take time before Career Day to find out which companies are represented of attending employers. Maximize your time by planning a strategy for companies you most want to visit. Make sure you visit companies you are planning on interviewing with after Career Day. Check the websites

Hemmers, Oliver

297

Motor learning of novel dynamics is not represented in a single global coordinate system: evaluation of mixed coordinate representations  

E-Print Network [OSTI]

. A second experiment, in which we replicated the design of an influential study that had suggested encoding represent novel dynamics while making reaching movements in a robot-rendered force field. By proposing two categorically distinct hypotheses of extrinsic (i.e., Cartesian based) and intrinsic (i.e., joint based

Franklin, David

298

A 13-digit ISBN, 978-3-16-148410-0, as represented by an EAN-13 bar  

E-Print Network [OSTI]

by the International Organization for Standardization (ISO) and was published in 1970 as international standard ISOA 13-digit ISBN, 978-3-16-148410-0, as represented by an EAN-13 bar code. International Standard Book Number From Wikipedia, the free encyclopedia The International Standard Book Number (ISBN

Kraft, Hanspeter

299

Power & Promise for student aid represents the George Washington University's commitment to the power of education and the promise of  

E-Print Network [OSTI]

POWER & PROMISE OVERVIEW Power & Promise for student aid represents the George Washington University's commitment to the power of education and the promise of tomorrow's leaders. Launched in 2009, Power & Promise ensures that qualified students, regardless of financial resources, can take full

Vertes, Akos

300

The Last of the Wild ver. 2 The Last of the Wild represents the least influenced (most  

E-Print Network [OSTI]

The Last of the Wild ver. 2 Oceania The Last of the Wild represents the least influenced (most wild) areas of major terrestrial biomes. Most wild in each biome are defined as areas with Human Footprint. The Last of the Wild Data set. Available at http://www.sedac.ciesin.columbia.edu/wildareas 0 500 Kilometers

Columbia University

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

The honey bees of Ethiopia represent a new subspecies of Apis mellifera--Apis mellifera simensis n. ssp.  

E-Print Network [OSTI]

The honey bees of Ethiopia represent a new subspecies of Apis mellifera--Apis mellifera simensis n bees endemic to the volcanic dome system of Ethiopia are described as a new subspecies, Apis mellifera this population. There is no indication for the presence of more than one subspecies of honey bee in Ethiopia

302

Systems Engineering-Energy Systems Technical Electives The following courses represent some of the content currently available university-wide  

E-Print Network [OSTI]

Systems Engineering-Energy Systems Technical Electives The following courses represent some for the Systems Engineering - Energy Systems graduate programs (provided these courses have not already been used approval, any graduate level courses that are consistent with the System Engineering-Energy Systems degree

303

Representing Process Variation with a Process Family Borislava I. Simidchieva, Lori A. Clarke, and Leon J. Osterweil  

E-Print Network [OSTI]

Representing Process Variation with a Process Family Borislava I. Simidchieva, Lori A. Clarke. The formalization of process definitions has been an invaluable aid in many domains. However, noticeable variations in processes start to emerge as precise details are added to process definitions. While each such variation

Massachusetts at Amherst, University of

304

Relaxations for Production Planning Problems with Increasing By-products  

E-Print Network [OSTI]

Relaxations for Production Planning Problems with Increasing By-products Srikrishna Sridhar, Jeff, James Leudtke SILO Seminars: Feb 1, 2012 #12;One slide summary Problem Description Production process involves desirable & undesirable products. Srikrishna Sridhar, Jeff Linderoth, James Leudtke SILO Seminars

Sheridan, Jennifer

305

Multi-Period Production Capacity Planning for Integrated Product and Production System Design*  

E-Print Network [OSTI]

Multi-Period Production Capacity Planning for Integrated Product and Production System Design* Emre.ac.uk kazu@umich.edu .Abstract ≠ This paper presents a simulation-based method to aid multi-period production capacity planning by quantifying the trade-off between product quality and production cost. The product

Saitou, Kazuhiro "Kazu"

306

120 Forest Products Company Gather to Combat Illegal Logging March 20, 2005  

E-Print Network [OSTI]

120 Forest Products Company Gather to Combat Illegal Logging March 20, 2005 Geneva - More than 120 wood flooring companies in China. "We all must work together to eliminate illegal logging. Government forest products company representatives, government officials and conservationists gathered this week

307

Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities. Sections 1-14  

SciTech Connect (OSTI)

The Fuel Cycle Risk Assessment Program was initiated to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. This report, the first from the program, defines and describes fuel cycle elements that are being considered in the program. One type of facility (and in some cases two) is described that is representative of each element of the fuel cycle. The descriptions are based on real industrial-scale facilities that are current state-of-the-art, or on conceptual facilities where none now exist. Each representative fuel cycle facility is assumed to be located on the appropriate one of four hypothetical but representative sites described. The fuel cycles considered are for Light Water Reactors with once-through flow of spent fuel, and with plutonium and uranium recycle. Representative facilities for the following fuel cycle elements are described for uranium (or uranium plus plutonium where appropriate): mining, milling, conversion, enrichment, fuel fabrication, mixed-oxide fuel refabrication, fuel reprocessing, spent fuel storage, high-level waste storage, transuranic waste storage, spent fuel and high-level and transuranic waste disposal, low-level and intermediate-level waste disposal, and transportation. For each representative facility the description includes: mainline process, effluent processing and waste management, facility and hardware description, safety-related information and potential alternative concepts for that fuel cycle element. The emphasis of the descriptive material is on safety-related information. This includes: operating and maintenance requirements, input/output of major materials, identification and inventories of hazardous materials (particularly radioactive materials), unit operations involved, potential accident driving forces, containment and shielding, and degree of hands-on operation.

Schneider, K.J.

1982-09-01T23:59:59.000Z

308

LENNOX HEARTH PRODUCTS  

Broader source: Energy.gov (indexed) [DOE]

LENNOX HEARTH PRODUCTS April 1, 2011 Mr. Daniel Cohen U.S. Department of Energy Assistant General Council for Legislation, Regulation and Energy Efficiency Office of the General...

309

Furfuryl alcohol cellular product  

DOE Patents [OSTI]

Self-extinguishing rigid foam products are formed by polymerization of furfuryl alcohol in the presence of a lightweight, particulate, filler, zinc chloride and selected catalysts.

Sugama, T.; Kukacka, L.E.

1982-05-26T23:59:59.000Z

310

Sustainable hydrogen production  

SciTech Connect (OSTI)

This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

Block, D.L.; Linkous, C.; Muradov, N.

1996-01-01T23:59:59.000Z

311

Microsystem product development.  

SciTech Connect (OSTI)

Over the last decade the successful design and fabrication of complex MEMS (MicroElectroMechanical Systems), optical circuits and ASICs have been demonstrated. Packaging and integration processes have lagged behind MEMS research but are rapidly maturing. As packaging processes evolve, a new challenge presents itself, microsystem product development. Product development entails the maturation of the design and all the processes needed to successfully produce a product. Elements such as tooling design, fixtures, gages, testers, inspection, work instructions, process planning, etc., are often overlooked as MEMS engineers concentrate on design, fabrication and packaging processes. Thorough, up-front planning of product development efforts is crucial to the success of any project.

Polosky, Marc A.; Garcia, Ernest J.

2006-04-01T23:59:59.000Z

312

Biogas Production Technologies  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Biogas Production Technologies Ruihong Zhang, Professor Biological and Agricultural Engineering University of California, Davis Email: rhzhang@ucdavis.edu Biogas and Fuel Cell...

313

Unit II-1 Inner products 1 Inner product and  

E-Print Network [OSTI]

Unit II-1 Inner products 1 Unit II-1 Inner product and orthogonality Unit II-1 Inner products 2 Real inner product ∑ V is a real vector space ∑ for u,vV define a scalar satisfying: linear: symmetric: positive definite: ∑ is called an inner product of u and v ∑ V with an inner product defined is called

Birkett, Stephen

314

Understanding and Improving Software Productivity  

E-Print Network [OSTI]

Understanding and Improving Software Productivity Walt Scacchi Institute for Software Research;2 Introduction ∑ What affects software productivity? ≠ Software productivity has been one of the most studied aspects of software engineering ≠ Goal: review sample of empirical studies of software productivity

Scacchi, Walt

315

Note: This syllabus may represent a past offering of this course and future course offerings may differ. HCDE 418: User Experience Design  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may the trade-offs #12;Note: This syllabus may represent a past offering of this course and future course

316

By-Products Utilization  

E-Print Network [OSTI]

-first Century, Hyderabad, India, February 1999. Department of Civil EngineeringandMechanics College) of foundry by-products, including foundry sand and slag. Most of these by-products are landfilled, primarily due to non-availability of economically attractive use options. Landfilling is not a desirable option

Wisconsin-Milwaukee, University of

317

By-Products Utilization  

E-Print Network [OSTI]

include workability, water requirement, bleeding, segregation, air content, time of set, and temperature with and without by-products, and soil and groundwater remediation technologies including bioremediation. ACI for power production. Its combustion in electric power plants produces large amounts of fly ash and bottom

Wisconsin-Milwaukee, University of

318

By-Products Utilization  

E-Print Network [OSTI]

-strength materials (CLSM); and, future research needs. The fresh concrete properties discussed are workability, water with and without by-products, and soil and groundwater remediation technologies including bioremediation. ACI for power production. Its combustion in electric power plants produces large amounts of fly ash and bottom

Wisconsin-Milwaukee, University of

319

By-Products Utilization  

E-Print Network [OSTI]

clean coal technology, are not extensively utilized in the cast concrete masonry products (bricks both conventional and clean coal technologies. A clean coal ash is defined as the ash derived from SO2Center for By-Products Utilization USE OF CLASS F FLY ASH AND CLEAN-COAL ASH BLENDS FOR CAST

Wisconsin-Milwaukee, University of

320

By-Products Utilization  

E-Print Network [OSTI]

ash or CFAs. Based on these properties, a number of constructive use options such as #12;pollution by saw mills, pulp mills, and the wood-products industry, by burning a combination of wood products control [3], land application [9,10,11], construction materials [13,14], have been reported. However, most

Wisconsin-Milwaukee, University of

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

WOOD PRODUCTS AND UTILIZATION  

E-Print Network [OSTI]

WOOD PRODUCTS AND UTILIZATION V #12;#12;443USDA Forest Service Gen. Tech. Rep. PSW-GTR-160. 1997. Section Overview Wood Products and Utilization1 John R. Shelly2 Forests are obviously a very important asset to California, and their economic and social value to the state is well documented. Wood

Standiford, Richard B.

322

& CONSUMPTION US HYDROPOWER PRODUCTION  

E-Print Network [OSTI]

ENERGY PRODUCTION & CONSUMPTION US HYDROPOWER PRODUCTION In the United States hydropower supplies 12% of the nation's electricity. Hydropower produces more than 90,000 megawatts of electricity, which is enough to meet the needs of 28.3 million consumers. Hydropower accounts for over 90% of all electricity

323

Phenomenology of ``Onium'' Production  

E-Print Network [OSTI]

The phenomenology of heavy quarkonia production in hadron collisions is reviewed. The theoretical predictions are compared to data. Commonly used production models are shown to fail in explaining all the experimental findings. The shortcomings of these models are analysed and possible improvements are discussed.

Matteo Cacciari

1995-05-18T23:59:59.000Z

324

By-Products Utilization  

E-Print Network [OSTI]

. Naik, Rudolph N. Kraus, Shiw S. Singh, Lori- Lynn C. Pennock, and Bruce Ramme Report No. CBU-2001 with numerous projects on the use of by-product materials including utilization of used foundry sand and fly ash;2 INTRODUCTION Wood FA is generated due to combustion of wood for energy production at pulp and paper mills, saw

Wisconsin-Milwaukee, University of

325

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization USE OF CLEAN COAL ASH AS SETTING TIME REGULATOR IN PORTLAND OF WISCONSIN ­ MILWAUKEE #12;2 Use of Clean Coal Ash as Setting Time Regulator in Portland Cement by Zichao Wu as setting time regulator for portland cement production. In this paper a source of clean coal ash (CCA

Wisconsin-Milwaukee, University of

326

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization HIGH-STRENGTH HVFA CONCRETE CONTAINING CLEAN COAL ASH By Tarun R #12;1 HIGH-STRENGTH HVFA CONCRETE CONTAINING CLEAN COAL ASH By Tarun R. Naik, Shiw S. Singh, and Bruce for manufacture of cement-based products using ashes generated from combustion of high-sulfur coals. A clean coal

Wisconsin-Milwaukee, University of

327

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization CLEAN COAL BY-PRODUCTS UTILIZATION IN ROADWAY, EMBANKMENTS-fueled plants, particularly use of eastern coals, has lead to the use of clean coal and using advanced sulfur dioxide control technologies. Figure 1 shows clean coal technology benefits(2) . In 1977, the concept

Wisconsin-Milwaukee, University of

328

By-Products Utilization  

E-Print Network [OSTI]

-Milwaukee, P.O. Box 784, Milwaukee, WI 53201 d Project Manager, Illinois Clean Coal Institute * Director UWM products containing clean coal ash compared to conventional coal ash. Utilization of clean coal ash is much products that utilize clean coal ash. With increasing federal regulations on power plant emissions, finding

Wisconsin-Milwaukee, University of

329

By-Products Utilization  

E-Print Network [OSTI]

SELF-COMPACTING CONCRETE By Tarun R. Naik, Rudolph N. Kraus, and Yoon-moon Chun Report No. CBU-2004 of Limestone Quarry By-Products for Developing Economical Self-Compacting Concrete Principle Investigator Name. For this proposed project, self-compacting concrete mixtures will be developed for prototype production that utilize

Wisconsin-Milwaukee, University of

330

By-Products Utilization  

E-Print Network [OSTI]

SELF-COMPACTING CONCRETE By Tarun R. Naik and Rakesh Kumar Report No. CBU-2003-15 REP-509 April 2003 CONCRETE April 2003 REP-509 #12;ii Use of Limestone Quarry By-Products for Developing Economical Self-Compacting in the production of economical self-compacting concrete. OBJECTIVE: The primary objective of this project

Wisconsin-Milwaukee, University of

331

Electricity Production from Steam-Exploded Corn Stover Biomass Yi Zuo, Pin-Ching Maness, and Bruce E. Logan*,  

E-Print Network [OSTI]

,5 but most of the chemical oxygen demand (COD) remains as fermentation end products consisting primarily of acetic and butyric acids.6 Microbial fuel cells (MFCs) represent a new method for energy

332

t Procedures A curve has been found representing the frequency distribution of values of the means of such samples,  

E-Print Network [OSTI]

gas, occurring naturally as the decay product of uranium. It is one of the densest substances to ionizing radiation and is the most variable from location to location. Radon gas from natural sources can

Watkins, Joseph C.

333

Improving the Educational Outcomes for Minorities: A Study of the Interactive Effects of Personnel Stability and Representative Bureacracy  

E-Print Network [OSTI]

IMPROVING THE EDUCATIONAL OUTCOMES FOR MINORITIES: A STUDY OF THE INTERACTIVE EFFECTS OF PERSONNEL STABILITY AND REPRESENTATIVE BUREACRACY A Dissertation by TABITHA SUSAN MARIE MORTON Submitted to the Office of Graduate Studies... and personnel stability, could be used in combination with one another in order to improve the educational policy outcomes for African American and Latino students. Using data from Texas school districts from 1994-2010 and a cross-sectional longitudinal...

Morton, Tabitha Susan Marie

2013-08-06T23:59:59.000Z

334

A global approach of the representativity concept: Application on a high-conversion light water reactor MOX lattice case  

SciTech Connect (OSTI)

The development of new types of reactor and the increase in the safety specifications and requirements induce an enhancement in both nuclear data knowledge and a better understanding of the neutronic properties of the new systems. This enhancement is made possible using ad hoc critical mock-up experiments. The main difficulty is to design these experiments in order to obtain the most valuable information. Its quantification is usually made by using representativity and transposition concepts. These theories enable to extract some information about a quantity of interest (an integral parameter) on a configuration, but generally a posteriori. This paper presents a more global approach of this theory, with the idea of optimizing the representativity of a new experiment, and its transposition a priori, based on a multiparametric approach. Using a quadratic sum, we show the possibility to define a global representativity which permits to take into account several quantities of interest at the same time. The maximization of this factor gives information about all quantities of interest. An optimization method of this value in relation to technological parameters (over-clad diameter, atom concentration) is illustrated on a high-conversion light water reactor MOX lattice case. This example tackles the problematic of plutonium experiment for the plutonium aging and a solution through the optimization of both the over-clad and the plutonium content. (authors)

Santos, N. D.; Blaise, P.; Santamarina, A. [CEA, DEN/DER/SPRC Cadarache, F-13108 Saint Paul-lez-Durance (France)

2013-07-01T23:59:59.000Z

335

Volunteer Day Countries Represented  

E-Print Network [OSTI]

Haiti Iran Korea Kuwait Russia Saudi Arabia Spain Taiwan Turkey Venezuela Vietnam Manners and Culture Q's warm-weather fashion, and we have a lot of warm w

Pilyugin, Sergei S.

336

Characteristics Representative Approximately  

E-Print Network [OSTI]

, these rays can be detected in other ways. X rays, for instance, change the color of photographic film. So the film. The beads in this activity work like X-ray film. They contain pigments that change color when, such as a desk lamp, an overhead projector, or fluorescent lights in the classroom. If you have a window in your

337

Representative Control Gates  

E-Print Network [OSTI]

& Integrated - Operationaly Certified As-Deployed Baseline Mission Analysis Risk, Cost, etc Tools & MethodsUnderstand Customer Identify Feasible Alternatives Final Design Disposal Management Decision - System Deployed Requirements Concept Definition Analysis & Evaluation Definition Flowdown Criteria & Priorities Peer Review MCR

Rhoads, James

338

APS Division Safety Representatives  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered¬ČPNGExperience4AJ01) (See95TI07)Operations2AP-XPS MeasuresIrradiationAdvanced

339

Volunteer Day Countries Represented  

E-Print Network [OSTI]

, but it really isn't. These three recreation facilities are supported by a portion of the additional fees full Board. Retirement Home for Horses-- Help care for aging and abandoned horses in a fun environment

Pilyugin, Sergei S.

340

Indecomposable Fusion Products  

E-Print Network [OSTI]

We analyse the fusion products of certain representations of the Virasoro algebra for c=-2 and c=-7 which are not completely reducible. We introduce a new algorithm which allows us to study the fusion product level by level, and we use this algorithm to analyse the indecomposable components of these fusion products. They form novel representations of the Virasoro algebra which we describe in detail. We also show that a suitably extended set of representations closes under fusion, and indicate how our results generalise to all (1,q) models.

Matthias R. Gaberdiel; Horst G. Kausch

1996-04-04T23:59:59.000Z

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Farm-level economic impacts of the House of Representatives Farm Bill Proposal, H.R. 2646, and the Senate Farm Bill Proposal, S. 1731, for representative rice farms  

E-Print Network [OSTI]

Studies of Texas A&M University in partial fulfillment of the requirements lor I he degree of MASTER OF SCIENCE August 2002 Major Subject: Agricultural Economics FARM-LEVEL ECONOMIC IMPACTS OF THE HOUSE OF REPRESENTATIVES FARM BILL PROPOSAL, H. R... as to style and content by: t lc James Richardson (Chair of Co ii. ie David Anderson (Member) Clai Nix (M mber ~Gene Nelson (Head of Department] August 2002 Major Subject: Agricultural Economics ABSTRACT Farm-Iwvei Economic Impacts of the House...

Houston, Christy Michelle

2002-01-01T23:59:59.000Z

342

Biomass-Derived Energy Products and Co-Products Market  

E-Print Network [OSTI]

Biomass-Derived Energy Products and Co-Products Market This report identifies the bio-fuels and co & Earth Science & Technology ­ University of Hawai`i at Manoa #12;Biomass-Derived Energy Products and Co agency thereof. #12;Biomass Derived Energy Products and Co- Products Market and Off-take Study Hawaii

343

Low Cost Hydrogen Production Platform  

SciTech Connect (OSTI)

A technology and design evaluation was carried out for the development of a turnkey hydrogen production system in the range of 2.4 - 12 kg/h of hydrogen. The design is based on existing SMR technology and existing chemical processes and technologies to meet the design objectives. Consequently, the system design consists of a steam methane reformer, PSA system for hydrogen purification, natural gas compression, steam generation and all components and heat exchangers required for the production of hydrogen. The focus of the program is on packaging, system integration and an overall step change in the cost of capital required for the production of hydrogen at small scale. To assist in this effort, subcontractors were brought in to evaluate the design concepts and to assist in meeting the overall goals of the program. Praxair supplied the overall system and process design and the subcontractors were used to evaluate the components and system from a manufacturing and overall design optimization viewpoint. Design for manufacturing and assembly (DFMA) techniques, computer models and laboratory/full-scale testing of components were utilized to optimize the design during all phases of the design development. Early in the program evaluation, a review of existing Praxair hydrogen facilities showed that over 50% of the installed cost of a SMR based hydrogen plant is associated with the high temperature components (reformer, shift, steam generation, and various high temperature heat exchange). The main effort of the initial phase of the program was to develop an integrated high temperature component for these related functions. Initially, six independent concepts were developed and the processes were modeled to determine overall feasibility. The six concepts were eventually narrowed down to the highest potential concept. A US patent was awarded in February 2009 for the Praxair integrated high temperature component design. A risk analysis of the high temperature component was conducted to identify any potential design deficiency related to the concept. The analysis showed that no fundamental design flaw existed with the concept, but additional simulations and prototypes would be required to verify the design prior to fabricating a production unit. These identified risks were addressed in detail during Phase II of the development program. Along with the models of the high temperature components, a detailed process and 3D design model of the remainder of system, including PSA, compression, controls, water treatment and instrumentation was developed and evaluated. Also, in Phase II of the program, laboratory/fullscale testing of the high temperature components was completed and stable operation/control of the system was verified. The overall design specifications and test results were then used to develop accurate hydrogen costs for the optimized system. Praxair continued development and testing of the system beyond the Phase II funding provided by the DOE through the end of 2008. This additional testing is not documented in this report, but did provide significant additional data for development of a prototype system as detailed in the Phase III proposal. The estimated hydrogen product costs were developed (2007 basis) for the 4.8 kg/h system at production rates of 1, 5, 10, 100 and 1,000 units built per year. With the low cost SMR approach, the product hydrogen costs for the 4.8 kg/h units at 50 units produced per year were approximately $3.02 per kg. With increasing the volume production to 1,000 units per year, the hydrogen costs are reduced by about 12% to $2.67 per kg. The cost reduction of only 12% is a result of significant design and fabrication efficiencies being realized in all levels of production runs through utilizing the DFMA principles. A simplified and easily manufactured design does not require large production volumes to show significant cost benefits. These costs represent a significant improvement and a new benchmark in the cost to produce small volume on-site hydrogen using existing process technologies. The cost mo

Timothy M. Aaron, Jerome T. Jankowiak

2009-10-16T23:59:59.000Z

344

Texas Alfalfa Production  

E-Print Network [OSTI]

With proper management, alfalfa will produce forage with the highest protein and total digestible nutrient of any hay crop. To aid in alfalfa production, this publication provides information on pre-plant factors, planting and stand establishment...

Stichler, Charles

1997-05-05T23:59:59.000Z

345

By-Products Utilization  

E-Print Network [OSTI]

%) were used in producing the concrete mixtures. The water to cementitious materials ratio was kept with and without by-products, and soil and groundwater remediation technologies including bioremediation. ACI

Wisconsin-Milwaukee, University of

346

Composite production riser assessment  

E-Print Network [OSTI]

The performance of a deep water composite production riser from a system perspective is presented, and its advantages are articulated through comparisons with a typical steel riser under identical service conditions. The composite riser joints...

Kim, Won Ki

2007-09-17T23:59:59.000Z

347

Biomass Energy Production Incentive  

Broader source: Energy.gov [DOE]

In 2007 South Carolina enacted the ''Energy Freedom and Rural Development Act'', which provides production incentives for certain biomass-energy facilities. Eligible systems earn $0.01 per kilowatt...

348

Power production and ADS  

SciTech Connect (OSTI)

We describe the power production process in Accelerator Driven Sub-critical systems employing Thorium-232 and Uranium-238 as fuel and examine the demands on the power of the accelerator required.

Raja, Rajendran; /Fermilab

2010-03-01T23:59:59.000Z

349

By-Products Utilization  

E-Print Network [OSTI]

-Products Utilization E-mail: ymchun@uwm.edu and F. D. Botha Project Manager, Illinois Clean Coal Institute 5776 Coal, University of Wisconsin-Milwaukee, Milwaukee, WI, USA. 4 Project Manager, Illinois Clean Coal Institute

Wisconsin-Milwaukee, University of

350

Production of Shale Oil  

E-Print Network [OSTI]

Intensive pre-project feasibility and engineering studies begun in 1979 have produced an outline plan for development of a major project for production of shale oil from private lands in the Piceance Basin in western Colorado. This outline plan...

Loper, R. D.

1982-01-01T23:59:59.000Z

351

BPA Power Products Catalog (pbl/products)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience Program CumulusA t iBudget2/4/139/4/2012 BnotMeteringProducts

352

Transmission Losses Product (pbl/products)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2Topo II: AnTraining andfordefault Sign In AboutProducts

353

Pretreated densified biomass products  

SciTech Connect (OSTI)

A product comprising at least one densified biomass particulate of a given mass having no added binder and comprised of a plurality of lignin-coated plant biomass fibers is provided, wherein the at least one densified biomass particulate has an intrinsic density substantially equivalent to a binder-containing densified biomass particulate of the same given mass and h a substantially smooth, non-flakey outer surface. Methods for using and making the product are also described.

Dale, Bruce E; Ritchie, Bryan; Marshall, Derek

2014-03-18T23:59:59.000Z

354

Ethyl Alcohol Production.  

E-Print Network [OSTI]

+------.-----.------.------.-----.------.-- o 2 3 4 5 6 Time (hrs.) Batch 29 Cooking and Fermenting Log Corn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 682 pounds (12.2 bushels) Natural gas used Meter measures in increments of 100 cubic feet. Cooking.... The following general production steps are the ones presently used and may change with future production experience. 1. The grain is ground in a hammermill with a 1/8- inch screen. Each of the 350 gallon cooker fermenter tanks normally handles a 12...

O'Neal, Henry

1981-01-01T23:59:59.000Z

355

Ethanol production from lignocellulose  

DOE Patents [OSTI]

This invention presents a method of improving enzymatic degradation of lignocellulose, as in the production of ethanol from lignocellulosic material, through the use of ultrasonic treatment. The invention shows that ultrasonic treatment reduces cellulase requirements by 1/3 to 1/2. With the cost of enzymes being a major problem in the cost-effective production of ethanol from lignocellulosic material, this invention presents a significant improvement over presently available methods.

Ingram, Lonnie O. (Gainesville, FL); Wood, Brent E. (Gainesville, FL)

2001-01-01T23:59:59.000Z

356

Productivity prediction model based on Bayesian analysis and productivity console  

E-Print Network [OSTI]

in poor planning and defies effective control of time and budgets in project management. In this research, we have built a productivity prediction model which uses productivity data from an ongoing project to reevaluate the initial productivity estimate...

Yun, Seok Jun

2005-08-29T23:59:59.000Z

357

Determination of capillary displacement pressure and representative average capillary pressure vs. depth in shally sandstones from well logs  

SciTech Connect (OSTI)

This research presents a method whereby the capillary displacement pressure Pcd and the representative average capillary pressure in shaly sandstone reservoirs exhibits continuous information vs. depth from well logs. By the aid of special core analysis, correlation functions were obtained that relate the capillary characteristics of the reservoir rock to its lithologic development. Since the lithologic influence factor is a well log-derived parameter the correlations then were used to determine by means of well logs the capillary displacement and average capillary pressures for borehole sections where special core analysis is not available. This technique has been developed and applied to the shaly sandstone reservoir of the Sarir oil field in Libya.

Barlai, Z.; Berruin, N.A.; Mawla, R.A.

1981-01-01T23:59:59.000Z

358

Design of product development systems  

E-Print Network [OSTI]

The development of successful new products in less time and using fewer resources is key to the financial success of most consumer product companies. In this thesis we have studied the development of new products and how ...

Aguirre Granados, Adrian

2008-01-01T23:59:59.000Z

359

Adding Value to Agricultural Products  

E-Print Network [OSTI]

You can significantly increase farm income by adding value to agricultural products and marketing those products effectively. This publication explains how to design a value-added product based on consumer preferences and how to build a business...

Anderson, David P.; Hanselka, Daniel

2009-06-01T23:59:59.000Z

360

JGI Lab Ergo Products Catalog  

E-Print Network [OSTI]

35 Page 1 of 35 Laboratory Ergonomics Product Arm Supports/Page 2 of 35 Laboratory Ergonomics Product Features/OptionsPage 3 of 35 Laboratory Ergonomics Product SoftEdge Corners

Alexandre, Melanie

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Technology's Impact on Production  

SciTech Connect (OSTI)

As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

Rachel Amann; Ellis Deweese; Deborah Shipman

2009-06-30T23:59:59.000Z

362

Covered Product Categories (Fact Sheet)  

SciTech Connect (OSTI)

Overview of the U.S. Department of Energy Federal Energy Management Program Energy-Efficient Product Procurement Program and its designated product category list.

Not Available

2011-08-01T23:59:59.000Z

363

GMP- Biomass Electricity Production Incentive  

Broader source: Energy.gov [DOE]

Green Mountain Power Corporation (GMP), Vermont's largest electric utility, offers a production incentive to farmers who own systems utilizing anaerobic digestion of agricultural products,...

364

Coal production expansion: a selected bibliography  

SciTech Connect (OSTI)

The expeditious and economic transport of coal from producing regions to consuming regions is essential to any policy designed to increase the use of coal as an energy source. Obtaining an optimal coal transportation system, including terminal facilities, is significant in providing US coal to its users in the United States and abroad. Rail, barge, truck, slurry pipeline, and ship are the modes used to move coal from the producer to the user. Transportation costs represent a large percentage of the delivered price. This bibliography includes 138 selected citations on coal export, transport, and production. The references are to reports from the Department of Energy and its contractors, reports from other government or private organizations, and journal articles, books, conference papers, and monographs from US originators. These citations and hundreds of additional citations on this subject are available for on-line searching and retrieval from the Technical Information Center's Energy Data Base using the DOE/RECON interactive system. Approximately 50,000 citations on coal and coal products are a part of this data base. Current additions to data base on this subject are announced monthly in Fossil Energy Update. DOE-sponsored work is also announced in Energy Research Abstracts. The citations in this publication are arranged in broad subject categories as shown in the table of contents. Five indexes are provided: Corporate, Author, Subject, Contract Number, and Report Number. Included as an appendix are some tables and figures from Energy Information Administration reports covering coal production and disposition.

Grissom, M.C. (ed.)

1980-07-01T23:59:59.000Z

365

A Quantum Production Model  

E-Print Network [OSTI]

The production system is a theoretical model of computation relevant to the artificial intelligence field allowing for problem solving procedures such as hierarchical tree search. In this work we explore some of the connections between artificial intelligence and quantum computation by presenting a model for a quantum production system. Our approach focuses on initially developing a model for a reversible production system which is a simple mapping of Bennett's reversible Turing machine. We then expand on this result in order to accommodate for the requirements of quantum computation. We present the details of how our proposition can be used alongside Grover's algorithm in order to yield a speedup comparatively to its classical counterpart. We discuss the requirements associated with such a speedup and how it compares against a similar quantum hierarchical search approach.

LuŪs Tarrataca; Andreas Wichert

2015-02-06T23:59:59.000Z

366

Home Fruit Production - Figs.  

E-Print Network [OSTI]

TDOC Z TA245.7 B873 NO.1591 B-1591 Texas Agricultural Extension Service HOM? FRUIT PRODUCTION FIGS LIBRARY SEP 2 7 1988 ( A&M Univer it Texas Agricultural Extension Service. Zerle L. Carpenter, Director. The Texas A&M University System.... College Station, Texas / (Blank Pa.ge -ill Original BBDetial . r .. ; :.' l , ::; .: .? HOME FRUIT PRODUCTION - FIGS Calvin G. Lyons and George Ray McEachern* Figs have been a part of Texas homesteads since the early development of the state...

Lyons, Calvin G.; McEachern, George Ray

1987-01-01T23:59:59.000Z

367

Barley Production in Texas.  

E-Print Network [OSTI]

nutrients. It is lower in nitrogenh extract and productive energy per I00 pounds lr feed, Table 4. Research Extension I] area sts 1-1 I" I uv I I - Y Barley is an excellent winter pasture, Figure ; While the total seasonal production for barley... from C.I. 7404, a Korean barley Wintex x Texan Sunrise x Bolivia Comfort, Purdue 1101, Wisconsin barbless, Chevron, Bolivia, Kentucky 1, Purdue 400-17 Texas x Ludwig [(Hooded 16 x Sunrise) x Tenwase] x Wong-Jet Juliaca x Peatland Selection from...

Atkins, I. M.; Gardenshire, J. H.; McDaniel, M. E.; Porter, K. B.

1969-01-01T23:59:59.000Z

368

15 Software Product Line Engineering with the UML: Deriving Products  

E-Print Network [OSTI]

15 Software Product Line Engineering with the UML: Deriving Products T. Ziadi and J.-M. Jťzťquel Abstract Software product line engineering introduces two new dimensions into the traditional engineering of software-based systems: the variability modeling and the product derivation. The variability gathers

Paris-Sud XI, Universitť de

369

Advanced Multi-Product Coal Utilization By-Product Processing Plant  

SciTech Connect (OSTI)

The objective of the project is to build a multi-product ash beneficiation plant at Kentucky Utilities 2,200-MW Ghent Generating Station, located in Carroll County, Kentucky. This part of the study includes an investigation of the secondary classification characteristics of the ash feedstock excavated from the lower ash pond at Ghent Station. The market study for the products of the processing plant (Subtask 1.6), conducted by Cemex, is reported herein. The study incorporated simplifying assumptions and focused only on pozzolan and ultra fine fly ash (UFFA). It found that the market for pozzolan in the Ghent area was oversupplied, with resultant poor pricing structure. Reachable export markets for the Ghent pozzolan market were mostly locally served with the exception of Florida. It was concluded that a beneficiated material for that market may be at a long term disadvantage. The market for the UFFA was more complex as this material would compete with other beneficiated ash and potential metakaolin and silica fume as well. The study concluded that this market represented about 100,000 tons of sales per year and, although lucrative, represented a widely dispersed niche market.

Andrew Jackura; John Groppo; Thomas Robl

2006-12-31T23:59:59.000Z

370

By-Products Utilization  

E-Print Network [OSTI]

wood with supplementary fuels such as coal, oil, natural gas, and coke by pulp and paper mills and wood, knots, chips, etc. with other supplementary fuels such as coal, oil, natural gas, and coke to generateCenter for By-Products Utilization DEVELOPMENT OF CLSM USING COAL ASH AND WOOD ASH, A SOURCE OF NEW

Wisconsin-Milwaukee, University of

371

By-Products Utilization  

E-Print Network [OSTI]

in a combination with a number of fuels including coal, petroleum coke, natural gas, etc. In the mid 1990s, the unit was firing a combination of coal and petroleum coke to generate energy. It has been established;1 PROJECT 1 - COAL COMBUSTION BY-PRODUCTS: CHARACTERIZATION AND USE OPTIONS Introduction An AFBC system

Wisconsin-Milwaukee, University of

372

Air Products effective way  

E-Print Network [OSTI]

PE O A e s a b O T A O ENNST Overview Air Products effective way standard me Departm Shipping has recently y of shipping eans. Air Pro ontainer that es of this pro onduct mark eep accelera eep the cost tilize widely a earch and m m visited Air er needs wer model was cr m approache ms

Demirel, Melik C.

373

By-Products Utilization  

E-Print Network [OSTI]

different types of compressed gases, compressed air, carbon dioxide, and a mixed gas. This mixed gas the compressive strength and binding the carbon dioxide in the carbonation-reaction products. The carbonation-reaction of the CLSM would also have the potential to reduce carbon dioxide emissions at a coal-fired power plant

Wisconsin-Milwaukee, University of

374

By-Products Utilization  

E-Print Network [OSTI]

Presentationand Publicationat the CBIP International Conference onFly Ash Disposal & Utilization,New Delhi, India, January 1998 foundry sand and slag. Most of these by-products are landfilled, primarily due to non-availability of economically attractive use options. Landfilling is not a desirable option because it not only causes huge

Wisconsin-Milwaukee, University of

375

Productivity increases in science  

SciTech Connect (OSTI)

The study quantifies the impact on the cost of experimentation of synergistic advancements in instrumentation, theory, and computation over the last two decades. The study finds that the productivity of experimental investigation (experimental results/$) is increasing as science is transformed from a linear, isolated approach to a hierarchical, multidisciplinary approach. Developments such as massively parallel processors coupled with instrumental systems with multiple probes and diverse data analysis capabilities will further this transformation and increase the productivity of scientific studies. The complexities and scale of today`s scientific challenges are much greater than in the past, however, so that the costs of research are increasing. Even though science is much more productive in terms of the experimental results, the challenges facing scientific investigators are increasing at an even faster pace. New approaches to infrastructure investments must capitalize on the changing dynamics of research and allow the scientific community to maximize gains in productivity so that complex problems can be attacked cost-effectively. Research strategies that include user facilities and coordinated experimental, computational, and theoretical research are needed.

Danko, J.E. [ed.; Young, J.K.; Molton, P.M.; Dirks, J.A.

1993-02-01T23:59:59.000Z

376

Productivity increases in science  

SciTech Connect (OSTI)

The study quantifies the impact on the cost of experimentation of synergistic advancements in instrumentation, theory, and computation over the last two decades. The study finds that the productivity of experimental investigation (experimental results/$) is increasing as science is transformed from a linear, isolated approach to a hierarchical, multidisciplinary approach. Developments such as massively parallel processors coupled with instrumental systems with multiple probes and diverse data analysis capabilities will further this transformation and increase the productivity of scientific studies. The complexities and scale of today's scientific challenges are much greater than in the past, however, so that the costs of research are increasing. Even though science is much more productive in terms of the experimental results, the challenges facing scientific investigators are increasing at an even faster pace. New approaches to infrastructure investments must capitalize on the changing dynamics of research and allow the scientific community to maximize gains in productivity so that complex problems can be attacked cost-effectively. Research strategies that include user facilities and coordinated experimental, computational, and theoretical research are needed.

Danko, J.E. (ed.); Young, J.K.; Molton, P.M.; Dirks, J.A.

1993-02-01T23:59:59.000Z

377

Lithium Ion Production NDE  

E-Print Network [OSTI]

Lithium Ion Electrode Production NDE and QC Considerations David Wood, Debasish Mohanty, Jianlin Li, and Claus Daniel 12/9/13 EERE Quality Control Workshop #12;2 Presentation name Lithium Ion Electrode to be meaningful and provide electrode and cell QC. #12;3 Presentation name New Directions in Lithium Ion Electrode

378

Covered Product Category: Displays  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including displays, which are covered by the ENERGY STAR program. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

379

By-Products Utilization  

E-Print Network [OSTI]

Issued to the Illinois Clean Coal Institute For Project 02-1/3.1D-2 Department of Civil Engineering of technology and market development for controlled low-strength material (CLSM) slurry using Illinois coal ashCenter for By-Products Utilization IMPLEMENTATION OF FLOWABLE SLURRY TECHNOLOGY IN ILLINOIS

Wisconsin-Milwaukee, University of

380

By-Products Utilization  

E-Print Network [OSTI]

technologies. A clean-coal ash is defined as the ash derived from SOxand NOxcontrol technologies, and FBC that obtained from clean-coal technology, are not utilized in cast-concrete masonry products (bricks, blocks conventional and clean-coal technologies. Fifteen high-sulfur coal ash samples were obtained from eight

Wisconsin-Milwaukee, University of

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

By-Products Utilization  

E-Print Network [OSTI]

and paper mills in concrete. INTRODUCTION Concrete is a porous solid that is created by combining four basicCenter for By-Products Utilization CURING TEMPERATURE EFFECTS ON HIGH-PERFORMANCE CONCRETE By Tarun For presentation and publication at the symposium entitled "High-Performance Concrete and Concrete for Marine

Wisconsin-Milwaukee, University of

382

By-Products Utilization  

E-Print Network [OSTI]

-burning electricity gene-ration is the current principal energy source. The total amounts of fly ash and bottom ash, University of Wisconsin - Milwaukee #12;The bar graph (Fig. 1) compares the production and utilization of fly shows the percentage of various usage of fly ash in China in 1988 [1]. Fig. 2 Percentage of Fly Ash

Wisconsin-Milwaukee, University of

383

By-Products Utilization  

E-Print Network [OSTI]

-Products Utilization University of Wisconsin-Milwaukee ABSTRACT This project consisted of performance testing at a typical electric power plant. One of the goals of this project was to determine the feasibility of using. The carbonation reaction of the CLSM would also have the potential to reduce carbon dioxide emissions at a coal-fired

Wisconsin-Milwaukee, University of

384

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization CHARACTERIZATION AND APPLICATION OF CLASSF FLY ASHCOAL AND CLEAN-COAL #12;-1- CHARACTERIZATION AND APPLICATION OF CLASSF FLYASHCOAL AND CLEAN-COAL ASHFOR CEMENT -Milwaukee (UWM) Daniel D.Banerjee, Project Manager,Illinois Clean Coal Institute RudolphN.Kraus, Research

Wisconsin-Milwaukee, University of

385

By-Products Utilization  

E-Print Network [OSTI]

Manager at the Illinois Clean Coal Institute (ICCI). He is involved in implementing and monitoring) coal-ash and by replacing up to 9% of aggregates with wet-collected, low-lime, coarse coal-ash. Cast of coal fly ash, coal bottom ash, and used foundry sand in concrete and cast-concrete products

Wisconsin-Milwaukee, University of

386

MAIL DISTRIBUTION MAIL PRODUCTION  

E-Print Network [OSTI]

permit. The use of this permit has numerous restrictions. 2. Any use of the special permit-profit organization postage rate and bulk mailing permit and may result in revocation of said permit. University of the University non-profit permit. 3. All bulk mailings must be coordinated with Mail Production at the earliest

387

Product Information Transparent  

E-Print Network [OSTI]

, transformers, amplifiers, high voltage resistor packs, and relays; adhesive/encapsulant for solar cellsProduct Information Solar FEATURES · Transparent · Cures to flexible elastomer · Constant cure rate elastomer, which is suited for the protection of electrical/electronic devices in solar applications. HOW

Yoo, S. J. Ben

388

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization CARBON DIOXIDE SEQUESTRATION IN NO-FINES CONCRETE By Tarun R;CARBON DIOXIDE SEQUESTRATION IN NO-FINES CONCRETE ABSTRACT By Tarun, R. Naik, Yoon-moon Chun, Rudolph N. Kraus, and Fethullah Canpolat This paper presents a detailed experimental study on the sequestration

Wisconsin-Milwaukee, University of

389

By-Products Utilization  

E-Print Network [OSTI]

of coal in conventional and/ or advanced clean coal technology combustors. These include fly ash, bottom ash, boiler slag, and flue gas desulfurization (FGD) by-products from advanced clean coal technology clean coal technology combustors. Over 60% of the CCBs are generated as fly ash. An estimate

Wisconsin-Milwaukee, University of

390

By-Products Utilization  

E-Print Network [OSTI]

­ Milwaukee, Milwaukee, WI and Ronald H. Carty Director Illinois Clean Coal Institute Carterville, IL ABSTRACT, Naik and Singh [16] summarized various applications of fly ash generated from conventional and clean coal technologies. Uses of coal combustion by- products can be categorized into three classes: high-volum

Wisconsin-Milwaukee, University of

391

By-Products Utilization  

E-Print Network [OSTI]

ECONOMICAL SELF-COMPACTING CONCRETE By Tarun R. Naik, Rudolph N. Kraus, Yoon-moon Chun, Fethullah Canpolat #12;USE OF FLY ASH AND LIMESTONE QUARRY BY-PRODUCTS FOR DEVELOPING ECONOMICAL SELF-COMPACTING CONCRETE material in the development of economical self-compacting concrete (SCC). Class C fly ash was also used

Wisconsin-Milwaukee, University of

392

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization SELF-COMPACTING CONCRETE (SCC) OR SELF- LEVELING CONCRETE (SLC - MILWAUKEE #12;2 SELF-COMPACTING CONCRETE (SCC) OR SELF ­LEVELING CONCRETE (SLC) INTRODUCTION Self-compacting as the concrete which can be placed and compacted into every corner of a form work, purely by means of its self

Wisconsin-Milwaukee, University of

393

By-Products Utilization  

E-Print Network [OSTI]

SELF-COMPACTING CONCRETE By Tarun R. Naik, Rudolph N. Kraus, Yoon-moon Chun, Fethullah Canpolat ECONOMICAL SELF-COMPACTING CONCRETE by Tarun R. Naik* , Rudolph N. Kraus** , Yoon-moon Chun*** , Fethullah of limestone-quarry by-product material in the development of economical self-compacting concrete (SCC). Class

Wisconsin-Milwaukee, University of

394

By-Products Utilization  

E-Print Network [OSTI]

ash. Paving applications, such as Roller Compacted Concrete for industrial plants, parking lots be used in Self-Consolidating Concrete applications. This type of concrete requires additional fines that concrete Bricks, Blocks, and Paving Stones can also be made with the Corn Products' coal ash. Additionally

Wisconsin-Milwaukee, University of

395

By-Products Utilization  

E-Print Network [OSTI]

, compressive strength, concrete testing, fly ash, high-performance concrete, hot weather, permeability, silica Testing of Concrete", Committee 214, "Evaluation of Results of Strength Tests of Concrete", and CommitteeCenter for By-Products Utilization STRENGTH AND DURABILITY OF HIGH- PERFORMANCE CONCRETE SUBJECTED

Wisconsin-Milwaukee, University of

396

MSENGR Product Design Program Proposal  

E-Print Network [OSTI]

MSENGR Product Design Program Proposal Rev 6/2007 p. 1 New Proposal Revision First graduate Language 3 ME216A Advanced Product Design: Need Finding 4 ME312 Advanced Product Design: Form Giving 4 ARTSTUDI160 Design II: The Bridge 3 ME216B Advanced Product Design: Implementation 4 ME316

Prinz, Friedrich B.

397

Technologies for Production of Heat and Electricity  

SciTech Connect (OSTI)

Biomass is a desirable source of energy because it is renewable, sustainable, widely available throughout the world, and amenable to conversion. Biomass is composed of cellulose, hemicellulose, and lignin components. Cellulose is generally the dominant fraction, representing about 40 to 50% of the material by weight, with hemicellulose representing 20 to 50% of the material, and lignin making up the remaining portion [4,5,6]. Although the outward appearance of the various forms of cellulosic biomass, such as wood, grass, municipal solid waste (MSW), or agricultural residues, is different, all of these materials have a similar cellulosic composition. Elementally, however, biomass varies considerably, thereby presenting technical challenges at virtually every phase of its conversion to useful energy forms and products. Despite the variances among cellulosic sources, there are a variety of technologies for converting biomass into energy. These technologies are generally divided into two groups: biochemical (biological-based) and thermochemical (heat-based) conversion processes. This chapter reviews the specific technologies that can be used to convert biomass to energy. Each technology review includes the description of the process, and the positive and negative aspects.

Jacob J. Jacobson; Kara G. Cafferty

2014-04-01T23:59:59.000Z

398

An economic evaluation of selected tenure arrangements for a representative farm in the northern high plains of Texas  

E-Print Network [OSTI]

wi. th wnich to compare the results of imcosing three indi. vidual farm leases upon the zodel. Tro of the selected leases were of the crop share type, popular in the study area. The third was desigred to provide both lease participants with equi... ? marginal returns to their entire bundle of resource inputs through the proportional sharing of 'xo~ h factors of pnx3uction and realized ret product. It was concluded that: (1) the prevailing lease system pro- vided economic incentive to farm...

Harwell, R. Lynn

1970-01-01T23:59:59.000Z

399

Pyrolysis for waste management: A life cycle assesment of biodegradable waste, bioenergy generation and biochar production in Glasgow and Clyde valley†  

E-Print Network [OSTI]

Biochar production and waste treatment by pyrolysis represent an attractive solution to decrease carbon dioxide atmospheric concentrations and to enhance the enrichment of soils by treating in a more sustainable way the ...

Ibarrola, Rodrigo

2009-01-01T23:59:59.000Z

400

Quarkonium Production in PHENIX  

E-Print Network [OSTI]

Quarkonia provide a sensitive probe of the properties of the hot dense medium created in high energy heavy ion collisions. Hard scattering processes result in the production of heavy quark pairs that interact with the collision medium during hadronization. These in medium interactions convey information about the fundamental properties of the medium itself and can be used to examine the modification of the QCD confining potential in the collision environment. Baseline measurements from the d+Au and p+p collision systems can be used to distinguish cold nuclear matter effects while measurements from heavy ion collision systems, Au+Au and Cu+Cu, can be used to quantify in-medium effects. PHENIX results for the production of the $J/\\psi$ for a diverse set of collision systems and energies and for the $\\Upsilon$ in p+p collisions are presented.

Abigail Bickley; for the PHENIX Collaboration

2007-01-22T23:59:59.000Z

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Joined ceramic product  

DOE Patents [OSTI]

According to the present invention, a joined product is at least two ceramic parts, specifically bi-element carbide parts with a bond joint therebetween, wherein the bond joint has a metal silicon phase. The bi-element carbide refers to compounds of MC, M.sub.2 C, M.sub.4 C and combinations thereof, where M is a first element and C is carbon. The metal silicon phase may be a metal silicon carbide ternary phase, or a metal silicide.

Henager, Jr., Charles W [Kennewick, WA; Brimhall, John L. (West Richland, WA) [West Richland, WA

2001-08-21T23:59:59.000Z

402

Computer as a physical system: a microscopic quantum mechanical Hamiltonian model of computers represented by Turing machines  

SciTech Connect (OSTI)

A microscopic quantum mechanical model of computers as represented by Turing machines is constructed. It is shown that for each number N and Turing machine Q there exists a Hamiltonian H/sub N//sup Q/ and a class of appropriate initial states such that, if PSI/sub Q//sup N/(0) is such an initial state, then PSI/sub Q//sup N/(t) = exp(-iH/sub N//sup Q/t) PSI/sub Q//sup N/(0) correctly describes at times t/sub 3/, t/sub 6/,..., t/sub 3N/ model states that correspond to the completion of the first, second,..., Nth computation step of Q. The model parameters can be adjusted so that for an arbitrary time interval ..delta.. around t/sub 3/, t/sub 6/,..., t/sub 3N/, the machine part of PSI/sub Q//sup N/(t) is stationary. 1 figure.

Benioff, P.

1980-01-01T23:59:59.000Z

403

Characterization of Representative Materials in Support of Safe, Long Term Storage of Surplus Plutonium in DOE-STD-3013 Containers  

SciTech Connect (OSTI)

The Surveillance and Monitoring Program is a joint Los Alamos National Laboratory/Savannah River Site effort funded by the Department of Energy-Environmental Management to provide the technical basis for the safe, long-term storage (up to 50 years) of over 6 metric tons of plutonium stored in over 5,000 DOE-STD-3013 containers at various facilities around the DOE complex. The majority of this material is plutonium that is surplus to the nuclear weapons program, and much of it is destined for conversion to mixed oxide fuel for use in US nuclear power plants. The form of the plutonium ranges from relatively pure metal and oxide to very impure oxide. The performance of the 3013 containers has been shown to depend on moisture content and on the levels, types and chemical forms of the impurities. The oxide materials that present the greatest challenge to the storage container are those that contain chloride salts. Other common impurities include oxides and other compounds of calcium, magnesium, iron, and nickel. Over the past 15 years the program has collected a large body of experimental data on 54 samples of plutonium, with 53 chosen to represent the broader population of materials in storage. This paper summarizes the characterization data, moisture analysis, particle size, surface area, density, wattage, actinide composition, trace element impurity analysis, and shelf life surveillance data and includes origin and process history information. Limited characterization data on fourteen nonrepresentative samples is also presented.

Narlesky, Joshua E. [Los Alamos National Laboratory; Stroud, Mary Ann [Los Alamos National Laboratory; Smith, Paul Herrick [Los Alamos National Laboratory; Wayne, David M. [Los Alamos National Laboratory; Mason, Richard E. [MET-1: ACTINIDE PROCESSING SUPPORT; Worl, Laura A. [Los Alamos National Laboratory

2013-02-15T23:59:59.000Z

404

EPA's designated products in eight categories: Construction Products  

E-Print Network [OSTI]

Transportation Products Channelizers Delineators Flexible delineators Parking stops Traffic barricades Traffic Safety Data Sheet (MSDS) is required for the purchase of chemicals or products containing chemicals" program and Comprehensive Procurement Guideline (CPG), designates items that MUST contain recycled

405

State regulation and power plant productivity: background and recommendations  

SciTech Connect (OSTI)

This report was prepared by representatives of several state regulatory agencies. It is a guide to some of the activities currently under way in state agencies to promote increased availability of electrical generating power plants. Standard measures of plant performance are defined and the nature of data bases that report such measures is discussed. It includes reviews of current state, federal, and industry programs to enhance power plant productivity and provides detailed outlines of programs in effect in California, Illinois, Michigan, New York, North Carolina, Ohio, and Texas. A number of actions are presented that could be adopted by state regulatory agencies, depending on local conditions. They include: develop a commission position or policy statement to encourage productivity improvements by utilities; coordinate state efforts with ongoing industry and government programs to improve the acquisition of power plant performance data and the maintenance of quality information systems; acquire the capability to perform independent analyses of power plant productivity; direct the establishment of productivity improvement programs, including explicit performance objectives for both existing and planned power plants, and a performance program; establish a program of incentives to motivate productivity improvement activities; and participate in ongoing efforts at all levels and initiate new actions to promote productivity improvements.

Not Available

1980-09-01T23:59:59.000Z

406

Essays on Product Recalls, New Product Preannouncements, and Shareholder Value  

E-Print Network [OSTI]

.......................................................................... 1 CHAPTER II DETERMINANTS OF THE LONG-TERM EFFECTS OF PRODUCT RECALLS ON SHAREHOLDER VALUE: AN EMPIRICAL ANALYSIS OF THE AUTOMOBILE INDUSTRY ................................................ 4 Introduction... ............................................................................... 101 1 CHAPTER I INTRODUCTION Companies increasingly face crises involving harm created by their products, ranging from defective automobile recalls, lead paint in toys, faulty medical devices, and contaminated food products, which often...

Yun, Wonjoo

2014-08-08T23:59:59.000Z

407

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS  

SciTech Connect (OSTI)

The purpose of this DOE-funded effort is to develop technologies for carbon products from coal-derived feed-stocks. Carbon products can include precursor materials such as solvent extracted carbon ore (SECO) and synthetic pitch (Synpitch). In addition, derived products include carbon composites, fibers, foams and others.

Dady Dadyburjor; Chong Chen; Elliot B. Kennel; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2005-12-12T23:59:59.000Z

408

Text markup using the TEI and collations using the MVED: a comparison of text encoding schemes in producing electronic text  

E-Print Network [OSTI]

by RAJIV DANIEL KOCHUMMAN Submitted to Texas A&M University in partial fulfillment of the requirements for thc degree of MASTER OF SCIENCE Approved as to style and content by: Richard Furuta (Chair of Committee) Eduardo Urbina (Member) Frank Shipm..., for his guidance and patience doting the project and the thesis. I would also ltke to thank Dr. Eduardo Urbina, whose ideas, comments and suggestions were most helpful tn undertaking and completing this thesis. I also thank Dr. Frank Shipman for hts...

Kochumman, Rajiv Daniel

2002-01-01T23:59:59.000Z

409

APT radionuclide production experiment  

SciTech Connect (OSTI)

Tritium ({sup 3}H, a heavy isotope of hydrogen) is produced by low energy neutron-induced reactions on various elements. One such reaction is n+{sup 3}He {yields}>{sup 3}H+{sup 1}H in which {sup 3}He is transmuted to tritium. Another reaction, which has been used in reactor production of tritium, is the n+{sup 6}Li {yields}> {sup 3}H+{sup 4}He reaction. Accelerator Production of Tritium relies on a high-energy proton beam to produce these neutrons using the spallation reaction, in which high-energy proton beam to produce these neutrons using the spallation reaction, in which high-energy protons reacting with a heavy nucleus produce a shower of low-energy neutrons and a lower-mass residual nucleus. It is important to quantify the residual radionuclides produced in the spallation target for two reasons. From an engineering point of view, one must understand short-lived isotopes that may contribute to decay heat. From a safety viewpoint, one must understand what nuclei and decay gammas are produced in order to design adequate shielding, to estimate ultimate waste disposal problems, and to predict possible effects due to accidental dispersion during operation. The authors have performed an experiment to measure the production of radioisotopes in stopping-length W and Pb targets irradiated by a 800 MeV proton beam, and are comparing the results to values obtained from calculations using LAHET and MCNP. The experiment was designed to pay particular attention to the short half-life radionuclides, which have not been previously measured. In the following, they present details of the experiment, explain how they analyzed the data and obtain the results, how they perform the calculations, and finally, how the experimental data agree with the calculations.

Ullmann, J.L.; Gavron, A.; King, J.D. [and others

1994-07-02T23:59:59.000Z

410

Challenges facing production grids  

SciTech Connect (OSTI)

Today's global communities of users expect quality of service from distributed Grid systems equivalent to that their local data centers. This must be coupled to ubiquitous access to the ensemble of processing and storage resources across multiple Grid infrastructures. We are still facing significant challenges in meeting these expectations, especially in the underlying security, a sustainable and successful economic model, and smoothing the boundaries between administrative and technical domains. Using the Open Science Grid as an example, I examine the status and challenges of Grids operating in production today.

Pordes, Ruth; /Fermilab

2007-06-01T23:59:59.000Z

411

Slaughter Calf Production.  

E-Print Network [OSTI]

slaughter calves. The most effective tool for selecting and improving a breeding herd is a set of records Figure 1. Quality in sire and dam is passed on to the calf. -. of production on every cow in the herd. To be profitable, a breeding herd of beef..., isolation accination are parts of this phase of man- ent. Although slaughter calves are pro- principaily on pastures, some cleanup ,nes need attention. Sanitation is the most important factor in the control of animal diseases. Muddy areas around...

Thompson, Uel D.

1955-01-01T23:59:59.000Z

412

Barley Production in Texas.  

E-Print Network [OSTI]

inclusive, an average of 14 6,O 0 0 acres of barley was planted, producing an average annual production of 2,445,000 bushels. The acreage and pro- duction fluctuate widely, being influenced by spring moisture conditions in west Texas and by winterkilling... the winter months, than on un- protected land. In west Texas it also may aid in reducing soil blowing. Barley may be used for hay or green manure crops, and in other sec- tions is used extensively in the brewing industry. At present very little barley...

Dunkle, P. B. (Paul Burtch); Atkins, Irvin Milburn

1941-01-01T23:59:59.000Z

413

Procurable Products, Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS RespondsLift PlanProcurable Products,

414

Weekly Blender Net Production  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:short version) Themonthly4Blender Net Production

415

Shale Gas Production  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. Natural GasquestionnairesquestionnairesGasA.San JuanGas Production

416

Productivity Achievement Award  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16Hamada wins Gerald Hahn Quality and Productivity

417

Covered Product Categories (Fact Sheet)  

SciTech Connect (OSTI)

Federal mandates require that Federal agencies purchase energy-efficient products. To help agency buyers meet these requirements, the Federal Energy Management Program (FEMP) maintains a list of FEMP-designated and ENERGY STAR-qualified product categories.

Not Available

2014-04-01T23:59:59.000Z

418

The Productivity Dilemma in Manufacturing  

E-Print Network [OSTI]

industry's needs, improve productivity, and reduce costs is known, but the technology transfer needed to impact our industrial productivity has not taken place. A key factor in accomplishing technology transfer and implementation is the availability...

Byrer, T. G.

1983-01-01T23:59:59.000Z

419

Automotive Component Product Development Enhancement  

E-Print Network [OSTI]

Automotive Component Product Development Enhancement Through Multi-Attribute System Design Engineering Systems Division #12;Automotive Component Product Development Enhancement Through Multi of Science in Engineering and Management February 2005 ABSTRACT Automotive industry is facing a tough period

420

Enabling effective product launch decisions  

E-Print Network [OSTI]

The present work looks into the question of optimizing the performance of product launch decisions-in particular, the decisions of product development duration and manufacturing ramp-up. It presents an innovative model for ...

Akamphon, Sappinandana

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Hydrogen Storage Technologies Hydrogen Production  

E-Print Network [OSTI]

Motors; Tesla Motors; five energy companies --BP America, Chevron Corporation, Phillips 66 Company, Exxon the U.S. Department of Energy; USCAR, representing Chrysler Group LLC, Ford Motor Company, and General

422

Small Power Production Facilities (Montana)  

Broader source: Energy.gov [DOE]

For the purpose of these regulations, a small power production facility is defined as a facility that:...

423

Fossil-Based Hydrogen Production  

E-Print Network [OSTI]

) Fossil-Based Hydrogen Production Praxair Praxair SNL TIAX · Integrated Ceramic Membrane System for H2

424

Covered Product Categories (Fact Sheet)  

SciTech Connect (OSTI)

List of Federal Energy Management Program (FEMP)-designated product categories for energy-efficient procurement requirements.

Not Available

2012-02-01T23:59:59.000Z

425

Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for  

E-Print Network [OSTI]

Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications number of vehicles it represents, DOE has established detailed cost targets for automotive fuel cell and track the cost of automotive fuel cell systems as progress is made in fuel cell technology. The purpose

426

Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for  

E-Print Network [OSTI]

Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications: 2010 Update it represents, the DOE has established detailed cost targets for automotive fuel cell systems and components of automotive fuel cell systems as progress is made in fuel cell technology. The purpose of these cost analyses

427

Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for  

E-Print Network [OSTI]

Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications for transportation. Fuel cell systems will have to be cost-competitive with conventional and advanced vehicle it represents, the DOE has established detailed cost targets for automotive fuel cell systems and components

428

Robust model based control method for wind energy production A. Pintea 1  

E-Print Network [OSTI]

Robust model based control method for wind energy production A. Pintea 1 , D. Popescu 1 , Ioana change effects will come to dominate every part of the earth. Wind power energy represents an interesting alternative to traditional forms of obtaining energy. However, the efficiency of wind power strongly depends

Boyer, Edmond

429

WORLD PRODUCTION AND TRADE IN  

E-Print Network [OSTI]

WORLD PRODUCTION AND TRADE IN FISH MEAL AND OIL UNITED STATES DEPARTMENT OF THE INTERIOR · FISH ON OF FISH MEAL AND OIL , ESPECIALLY DUR ING 1953 TO 1959, THE PRI NC IPAL MARKET S FOR THE PRODUCTS- DICATE WHAT IS INCLUDED BESIDES FISHMEAL AND FISH BODY OIL. #12;WORLD PRODUCTION AND TRADE IN FISH MEAL

430

Creating Value Wood Products Industry  

E-Print Network [OSTI]

Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all for quality information, research and education in forest products in Louisiana, recognized regionally

431

Upsilon Productions at STAR  

E-Print Network [OSTI]

The $\\Upsilon(1S+2S+3S)\\to e^{+}e^{-}$ cross section is measured at mid-rapidity ($y$) in $p+p$ collisions and in d$+Au$ collisions at center-of-mass energy $\\sqrt{s}$ = 200 GeV with the STAR detector at RHIC. In $p+p$, the measured cross section is found to be consistent with the world data trend as a function of $\\sqrt{s}$, in agreement with the Color Evaportaion Model (CEM), and underestimated by the Color Singlet Model (CSM) up to the Next-to-Leading-Order Quantum Chromodynamics (NLO QCD) calculations. In d+$Au$, the measured cross section is in agreement with the CEM prediction with anti-shadowing effects, and the nuclear modification factor indicates that $\\Upsilon(1S+2S+3S)$ production follows binary scaling within the current uncertainties. These measurements provide a benchmark for the future measurements of $\\Upsilon$ production in $Au+Au$ collisions.

A. M. Hamed

2010-05-22T23:59:59.000Z

432

Homological Product Codes  

E-Print Network [OSTI]

Quantum codes with low-weight stabilizers known as LDPC codes have been actively studied recently due to their simple syndrome readout circuits and potential applications in fault-tolerant quantum computing. However, all families of quantum LDPC codes known to this date suffer from a poor distance scaling limited by the square-root of the code length. This is in a sharp contrast with the classical case where good families of LDPC codes are known that combine constant encoding rate and linear distance. Here we propose the first family of good quantum codes with low-weight stabilizers. The new codes have a constant encoding rate, linear distance, and stabilizers acting on at most $\\sqrt{n}$ qubits, where $n$ is the code length. For comparison, all previously known families of good quantum codes have stabilizers of linear weight. Our proof combines two techniques: randomized constructions of good quantum codes and the homological product operation from algebraic topology. We conjecture that similar methods can produce good stabilizer codes with stabilizer weight $n^a$ for any $a>0$. Finally, we apply the homological product to construct new small codes with low-weight stabilizers.

Sergey Bravyi; Matthew B. Hastings

2013-11-04T23:59:59.000Z

433

Method for production of magnesium  

DOE Patents [OSTI]

A continuous process for the production of elemental magnesium is described. Magnesium is made from magnesium oxide and a light hydrocarbon gas. In the process, a feed stream of the magnesium oxide and gas is continuously fed into a reaction zone. There the magnesium oxide and gas are reacted at a temperature of about 1400 C or greater in the reaction zone to provide a continuous product stream of reaction products, which include elemental magnesium. The product stream is continuously quenched after leaving the reaction zone, and the elemental magnesium is separated from other reaction products. 12 figs.

Diaz, A.F.; Howard, J.B.; Modestino, A.J.; Peters, W.A.

1998-07-21T23:59:59.000Z

434

Method for production of magnesium  

DOE Patents [OSTI]

A continuous process for the production of elemental magnesium is described. Magnesium is made from magnesium oxide and a light hydrocarbon gas. In the process, a feed stream of the magnesium oxide and gas is continuously fed into a reaction zone. There the magnesium oxide and gas are reacted at a temperature of about 1400.degree. C. or greater in the reaction zone to provide a continuous product stream of reaction products, which include elemental magnesium. The product stream is continuously quenched after leaving the reaction zone, and the elemental magnesium is separated from other reaction products.

Diaz, Alexander F. (Cambridge, MA); Howard, Jack B. (Winchester, MA); Modestino, Anthony J. (Hanson, MA); Peters, William A. (Lexington, MA)

1998-01-01T23:59:59.000Z

435

[Data in metric tons of yttrium oxide (Y2O3) content unless otherwise noted] Domestic Production and Use: Rare earths were mined by one U.S. company in 2013. Bastnasite, a rare-earth  

E-Print Network [OSTI]

to represent 0.12 percent of the rare-earth elements in the Mountain Pass bastnasite ore. The leading end uses Production and Use: Rare earths were mined by one U.S. company in 2013. Bastnasite, a rare-earth fluorocarbonate mineral, was mined as a primary product at Mountain Pass, CA. Domestic production of rare-earth

436

Production of zinc pellets  

DOE Patents [OSTI]

Uniform zinc pellets are formed for use in batteries having a stationary or moving slurry zinc particle electrode. The process involves the cathodic deposition of zinc in a finely divided morphology from battery reaction product onto a non-adhering electrode substrate. The mossy zinc is removed from the electrode substrate by the action of gravity, entrainment in a flowing electrolyte, or by mechanical action. The finely divided zinc particles are collected and pressed into pellets by a mechanical device such as an extruder, a roller and chopper, or a punch and die. The pure zinc pellets are returned to the zinc battery in a pumped slurry and have uniform size, density and reactivity. Applications include zinc-air fuel batteries, zinc-ferricyanide storage batteries, and zinc-nickel-oxide secondary batteries.

Cooper, John F. (Oakland, CA)

1996-01-01T23:59:59.000Z

437

Production of zinc pellets  

DOE Patents [OSTI]

Uniform zinc pellets are formed for use in batteries having a stationary or moving slurry zinc particle electrode. The process involves the cathodic deposition of zinc in a finely divided morphology from battery reaction product onto a non-adhering electrode substrate. The mossy zinc is removed from the electrode substrate by the action of gravity, entrainment in a flowing electrolyte, or by mechanical action. The finely divided zinc particles are collected and pressed into pellets by a mechanical device such as an extruder, a roller and chopper, or a punch and die. The pure zinc pellets are returned to the zinc battery in a pumped slurry and have uniform size, density and reactivity. Applications include zinc-air fuel batteries, zinc-ferricyanide storage batteries, and zinc-nickel-oxide secondary batteries. 6 figs.

Cooper, J.F.

1996-11-26T23:59:59.000Z

438

Light cone matrix product  

SciTech Connect (OSTI)

We show how to combine the light-cone and matrix product algorithms to simulate quantum systems far from equilibrium for long times. For the case of the XXZ spin chain at {Delta} = 0.5, we simulate to a time of {approx} 22.5. While part of the long simulation time is due to the use of the light-cone method, we also describe a modification of the infinite time-evolving bond decimation algorithm with improved numerical stability, and we describe how to incorporate symmetry into this algorithm. While statistical sampling error means that we are not yet able to make a definite statement, the behavior of the simulation at long times indicates the appearance of either 'revivals' in the order parameter as predicted by Hastings and Levitov (e-print arXiv:0806.4283) or of a distinct shoulder in the decay of the order parameter.

Hastings, Matthew B [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

439

Production of magnesium metal  

DOE Patents [OSTI]

A process of producing magnesium metal includes providing magnesium carbonate, and reacting the magnesium carbonate to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The carbon dioxide is used as a reactant in a second process. In another embodiment of the process, a magnesium silicate is reacted with a caustic material to produce magnesium hydroxide. The magnesium hydroxide is reacted with a source of carbon dioxide to produce magnesium carbonate. The magnesium carbonate is reacted to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The invention further relates to a process for production of magnesium metal or a magnesium compound where an external source of carbon dioxide is not used in any of the reactions of the process. The invention also relates to the magnesium metal produced by the processes described herein.

Blencoe, James G. (Harriman, TN) [Harriman, TN; Anovitz, Lawrence M. (Knoxville, TN) [Knoxville, TN; Palmer, Donald A. (Oliver Springs, TN) [Oliver Springs, TN; Beard, James S. (Martinsville, VA) [Martinsville, VA

2010-02-23T23:59:59.000Z

440

Alternative wind power modeling methods using chronological and load duration curve production cost models  

SciTech Connect (OSTI)

As an intermittent resource, capturing the temporal variation in windpower is an important issue in the context of utility production cost modeling. Many of the production cost models use a method that creates a cumulative probability distribution that is outside the time domain. The purpose of this report is to examine two production cost models that represent the two major model types: chronological and load duration cure models. This report is part of the ongoing research undertaken by the Wind Technology Division of the National Renewable Energy Laboratory in utility modeling and wind system integration.

Milligan, M R

1996-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Deep Atomic Binding (DAB) Approach in Interpretation of Fission Products Behavior in Terrestrial and Water Ecosystems  

SciTech Connect (OSTI)

A large number of studies and models were established to explain the fission products (FP) behavior within terrestrial and water ecosystems, but a number of behaviors were non understandable, which always attributed to unknown reasons. According to DAB hypothesis, almost all fission products behaviors in terrestrial and water ecosystems could be interpreted in a wide coincidence. The gab between former models predictions, and field behavior of fission products after accidents like Chernobyl have been explained. DAB represents a tool to reduce radio-phobia as well as radiation protection expenses. (author)

Ajlouni, Abdul-Wali M.S. [Ministry of Energy and Mineral Resources, Amman 11814 (Jordan)

2006-07-01T23:59:59.000Z

442

Volume 3: Characterization of representative reservoirs -- South Marsh Island 73, B35K and B65G Reservoirs  

SciTech Connect (OSTI)

This report documents the results of a detailed study of two Gulf of Mexico salt dome related reservoirs and the application of a publicly available PC-based black oil simulator to model the performances of gas injection processes to recover attic oil. The overall objective of the research project is to assess the oil reserve potential that could result from the application of proven technologies to recover bypassed oil from reservoirs surrounding piercement salt domes in the Gulf of Mexico. The specific study objective was to simulate the primary recovery and attic gas injection performance of the two subject reservoirs to: (1) validate the BOAST model; (2) quantify the attic volume; and (3) predict the attic oil recovery potential that could result from additional updip gas injection. The simulation studies were performed on the B-35K Reservoir and the B-65G Reservoir in the South Marsh Island Block 73 Field using data provided by one of the field operators. A modified PC-version of the BOAST II model was used to match the production and injection performances of these reservoirs in which numerous gas injection cycles had been conducted to recover attic oil. The historical performances of the gas injection cycles performed on both the B-35K Reservoir and B-65G Reservoir were accurately matched, and numerous predictive runs were made to define additional potential for attic oil recovery using gas injection. Predictive sensitivities were conducted to examine the impact of gas injection rate, injection volume, post-injection shut-in time, and the staging of gas injection cycles on oil recovery.

Young, M.A.; Salamy, S.P.; Reeves, T.K. [BDM-Oklahoma, Inc., Bartlesville, OK (United States); Kimbrell, W.C. [Louisiana State Univ., Baton Rouge, LA (United States). Dept. of Petroleum Engineering; Sawyer, W.K. [Mathematical and Computer Services, Inc., Danville, VA (United States)

1998-07-01T23:59:59.000Z

443

Hydroprocessing Bio-oil and Products Separation for Coke Production  

SciTech Connect (OSTI)

Fast pyrolysis of biomass can be used to produce a raw bio-oil product, which can be upgraded by catalytic hydroprocessing to hydrocarbon liquid products. In this study the upgraded products were distilled to recover light naphtha and oils and to produce a distillation resid with useful properties for coker processing and production of renewable, low-sulfur electrode carbon. For this hydroprocessing work, phase separation of the bio-oil was applied as a preparatory step to concentrate the heavier, more phenolic components thus generating a more amenable feedstock for resid production. Low residual oxygen content products were produced by continuous-flow, catalytic hydroprocessing of the phase separated bio-oil.

Elliott, Douglas C.; Neuenschwander, Gary G.; Hart, Todd R.

2013-04-01T23:59:59.000Z

444

Production design for plate products in the steel industry  

E-Print Network [OSTI]

Apr 5, 2007 ... The use of these tools provides two types of benefits: improvements in the productivity of the plant and an approach to making the key business†...

Sanjeeb Dash

2007-04-05T23:59:59.000Z

445

Hydrogen production from carbonaceous material  

DOE Patents [OSTI]

Hydrogen is produced from solid or liquid carbon-containing fuels in a two-step process. The fuel is gasified with hydrogen in a hydrogenation reaction to produce a methane-rich gaseous reaction product, which is then reacted with water and calcium oxide in a hydrogen production and carbonation reaction to produce hydrogen and calcium carbonate. The calcium carbonate may be continuously removed from the hydrogen production and carbonation reaction zone and calcined to regenerate calcium oxide, which may be reintroduced into the hydrogen production and carbonation reaction zone. Hydrogen produced in the hydrogen production and carbonation reaction is more than sufficient both to provide the energy necessary for the calcination reaction and also to sustain the hydrogenation of the coal in the gasification reaction. The excess hydrogen is available for energy production or other purposes. Substantially all of the carbon introduced as fuel ultimately emerges from the invention process in a stream of substantially pure carbon dioxide. The water necessary for the hydrogen production and carbonation reaction may be introduced into both the gasification and hydrogen production and carbonation reactions, and allocated so as transfer the exothermic heat of reaction of the gasification reaction to the endothermic hydrogen production and carbonation reaction.

Lackner, Klaus S.; Ziock, Hans J.; Harrison, Douglas P.

2004-09-14T23:59:59.000Z

446

Covered Product Category: Commercial Griddles  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial griddles, which is a product category covered by the ENERGY STAR program

447

Optimization Online - Robust Production Management  

E-Print Network [OSTI]

Feb 23, 2011 ... Abstract: The problem of production management can often be cast in the form ... We then give the quality of robust solutions obtained by using†...

Vincent Guigues

2011-02-23T23:59:59.000Z

448

Covered Product Category: Commercial Fryers  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial fryers, which is a product category covered by the ENERGY STAR program.

449

Toda Cathode Materials Production Facility  

Broader source: Energy.gov (indexed) [DOE]

Cathode Materials Production Facility 2013 DOE Vehicle Technologies Annual Merit Review May 13-17, 2013 David Han, Yasuhiro Abe Toda America Inc. Project ID: ARRAVT017...

450

Coalbed methane production case histories  

SciTech Connect (OSTI)

The production of methane gas from coal and coal-bearing rocks is one of the prime objectives of the Department of Energy's Methane Recovery from Coalbeds Project. This report contains brief description of wells that are presently producing gas from coal or coal-bearing rocks. Data from three gob gas production areas in Illinois, an in-mine horizontal borehole degasification, and eleven vertical boreholes are presented. Production charts and electric logs of the producing zones are included for some of the wells. Additional information on dry gas production from the San Juan Basin, Colorado/New Mexico and the Greater Green River Coal Region, Colorado/Wyoming is also included.

Not Available

1981-02-01T23:59:59.000Z

451

AGENDA: PETROLEUM PRODUCT TRANSMISSION & DISTRIBUTION  

Broader source: Energy.gov [DOE]

The agenda for the Quadrennial Energy Review (QER) public stakeholder meeting in New Orleans on petroleum product transmission, distribution, and storage.

452

Video Production Checklist Gear needed  

E-Print Network [OSTI]

Video Production Checklist Gear needed: ∑ Camera ∑ Tripod ∑ Headphones ∑ Microphone ∑ Memory cards (sunlight, tungsten, fluorescent, etc.) Camera should have an auto white balance setting. ∑ Mic the person

Jacobs, Laurence J.

453

FISHERY PRODUCTS SITUATION Consumption of fishery products is ex-  

E-Print Network [OSTI]

. Per -capita sales likely will be near 11.2 pounds--down from 11.4 pounds in 1970. Consumption had beenFISHERY PRODUCTS SITUATION Consumption of fishery products is ex- pected to be off a little in 1971 to attract more imports in 1971 . Since U.S. fish consumption is about 550/0-de- pendent on imports

454

Production of carboxylic acid and salt co-products  

DOE Patents [OSTI]

This invention provide processes for producing carboxylic acid product, along with useful salts. The carboxylic acid product that is produced according to this invention is preferably a C.sub.2-C.sub.12 carboxylic acid. Among the salts produced in the process of the invention are ammonium salts.

Hanchar, Robert J.; Kleff, Susanne; Guettler, Michael V.

2014-09-09T23:59:59.000Z

455

Universal Product Design: Transforming User Activity Into Product Function  

E-Print Network [OSTI]

Many people have disabilities and would like to have all of the amenities typical of daily life. Universal product design is important in designing for the disabled and creating user-friendly products for all people. The goal of this thesis...

Kostovich, Vincent

2010-07-14T23:59:59.000Z

456

Conditions for uniqueness of product representations for separable quantum channels and separable quantum states  

E-Print Network [OSTI]

We give a sufficient condition that an operator sum representation of a separable quantum channel in terms of product operators is the unique product representation for that channel, and then provide examples of such channels for any number of parties. This result has implications for efforts to determine whether or not a given separable channel can be exactly implemented by local operations and classical communication. By the Choi-Jamiolkowski isomorphism, it also translates to a condition for the uniqueness of product state ensembles representing a given quantum state. These ideas follow from considerations concerning whether or not a subspace spanned by a given set of product operators contains at least one additional product operator.

Scott M. Cohen

2014-05-29T23:59:59.000Z

457

Product Development Practices for Meeting Financial Objectives  

E-Print Network [OSTI]

This paper reports product development practices that separate the most successful product development programs from the rest. A detailed understanding of best product development practices is important because product ...

Makumbe, Pedzi

2009-10-31T23:59:59.000Z

458

Productivity Improvement of a Manual Assembly Line  

E-Print Network [OSTI]

The current project addresses the productivity improvement of a manual assembly line by making use of operations analysis in the framework of Lean production. A methodology is proposed that helps to improve the productivity of any production process...

Yerasi, Pranavi

2012-10-19T23:59:59.000Z

459

Fission product solvent extraction  

SciTech Connect (OSTI)

Two main objectives concerning removal of fission products from high-level tank wastes will be accomplished in this project. The first objective entails the development of an acid-side Cs solvent-extraction (SX) process applicable to remediation of the sodium-bearing waste (SBW) and dissolved calcine waste (DCW) at INEEL. The second objective is to develop alkaline-side SX processes for the combined removal of Tc, Cs, and possibly Sr and for individual separation of Tc (alone or together with Sr) and Cs. These alkaline-side processes apply to tank wastes stored at Hanford, Savannah River, and Oak Ridge. This work exploits the useful properties of crown ethers and calixarenes and has shown that such compounds may be economically adapted to practical processing conditions. Potential benefits for both acid- and alkaline-side processing include order-of-magnitude concentration factors, high rejection of bulk sodium and potassium salts, and stripping with dilute (typically 10 mM) nitric acid. These benefits minimize the subsequent burden on the very expensive vitrification and storage of the high-activity waste. In the case of the SRTALK process for Tc extraction as pertechnetate anion from alkaline waste, such benefits have now been proven at the scale of a 12-stage flowsheet tested in 2-cm centrifugal contactors with a Hanford supernatant waste simulant. SRTALK employs a crown ether in a TBP-modified aliphatic kerosene diluent, is economically competitive with other applicable separation processes being considered, and has been successfully tested in batch extraction of actual Hanford double-shell slurry feed (DSSF).

Moyer, B.A.; Bonnesen, P.V.; Sachleben, R.A. [and others

1998-02-01T23:59:59.000Z

460

Solar Thermochemical Hydrogen Production Research (STCH): Thermochemic...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solar Thermochemical Hydrogen Production Research (STCH): Thermochemical Cycle Selection and Investment Priority Solar Thermochemical Hydrogen Production Research (STCH):...

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

A Photosynthetic Hydrogel for Catalytic Hydrogen Production ...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A Photosynthetic Hydrogel for Catalytic Hydrogen Production Home > Research > ANSER Research Highlights > A Photosynthetic Hydrogel for Catalytic Hydrogen Production...

462

INTERWELL CONNECTIVITY AND DIAGNOSIS USING CORRELATION OF PRODUCTION AND INJECTION RATE DATA IN HYDROCARBON PRODUCTION  

SciTech Connect (OSTI)

This report details much of the progress on inferring interwell communication from well rate fluctuations. The goal of the project was to investigate the feasibility of inferring reservoir properties through weights derived from correlations between injection and production rates. We have focused on and accomplished the following items: (1) We have identified two possible causes for the source of negative weights. These are colinearity between injectors, and nonstationarity of be production data. (2) Colinearity has been addressed through ridge regression. Though there is much to be done here, such regression represents a trade-off between a minimum variance estimator and a biased estimator. (3) We have applied the ridge regression and the original Albertoni procedure to field data from the Magnus field. (4) The entire procedure (with several options) has been codified as a spreadsheet add-in. (5) Finally, we have begun, and report on, an extension of the method to predicting oil rates. Successful completion of these items will constitute the bulk of the final year's report.

Jerry L. Jensen; Larry W. Lake; Thang D. Bui; Ali Al-Yousef; Pablo Gentil

2004-08-01T23:59:59.000Z

463

Production System DesignProduction System DesignProduction System DesignProduction System Design ContestContestContestContest I&ME 458 Spring 2010  

E-Print Network [OSTI]

Production System DesignProduction System DesignProduction System DesignProduction System Design ContestContestContestContest I&ME 458 ­ Spring 2010 The Production System Design Contest is a chance" during the final exam period. Objectives Each team will design a production system to meet customer

Sobek II, Durward K.

464

Productivity improvement for longwall development  

SciTech Connect (OSTI)

Industry survey reveals coal operators thoughts about the use of different techniques to keep development ahead of longwall production. Factors considered that can optimise productivity include mine design (the number of entries, size of pillars etc.), work schedules, preventative maintenance programs and good management. The article was adapted from a presentation to Longwall USA 2005, in June 2005 (Pittsburgh, PA, USA). 3 figs.

Whipkey, K. [Norwest, Ashland, KY (United States)

2005-08-01T23:59:59.000Z

465

Diboson production at the Tevatron  

SciTech Connect (OSTI)

The CDF and D{null} detectors at the Tevatron Collider are being used to measure {ital WW}, {ital WZ}, and {ital ZZ} production as well as {ital W}{sub {gamma}} and {ital Z}{sub {gamma}} production in order to study Trilinear Gauge Couplings. Improved limits on nonstandard coupling parameters are given and prospects for further improvement are discussed.

Nodulman, L.J.; CDF and D0 Collaborations

1996-09-01T23:59:59.000Z

466

2013 Domestic Uranium Production Report  

E-Print Network [OSTI]

Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA.S. Energy Information Administration | 2013 Domestic Uranium Production Report iii Preface The U.S. Energy://www.eia.doe.gov/glossary/. #12;U.S. Energy Information Administration | 2013 Domestic Uranium Production Report iv Contents

467

Transverse Energy Production at RHIC  

E-Print Network [OSTI]

We study the mechanism of transverse energy (E_T) production in Au+Au collisions at RHIC. The time evolution starting from the initial energy loss to the final E_T production is closely examined in transport models. The relationship between the experimentally measured E_T distribution and the maximum energy density achieved is discussed.

Qun Li; Yang Pang; Nu Xu

1999-06-18T23:59:59.000Z

468

Silviculture Forest Productivity and Nutrition  

E-Print Network [OSTI]

15 Silviculture Forest Productivity and Nutrition Fire and Fuel Load Management Tree crops for bio-energy Productivity of Semi-mature Cape Pines Across Gradients of Water and Nutrient Availability The nutrient as optimise the period of their release to use in controlled release fertilizer mixtures. This will make large

Geldenhuys, Jaco

469

Consensus Coal Production Forecast for  

E-Print Network [OSTI]

in the consensus forecast produced in 2006, primarily from the decreased demand as a result of the current nationalConsensus Coal Production Forecast for West Virginia 2009-2030 Prepared for the West Virginia Summary 1 Recent Developments 2 Consensus Coal Production Forecast for West Virginia 10 Risks

Mohaghegh, Shahab

470

Demand Forecasting of New Products  

E-Print Network [OSTI]

Demand Forecasting of New Products Using Attribute Analysis Marina Kang A thesis submitted Abstract This thesis is a study into the demand forecasting of new products (also referred to as Stock upon currently employed new-SKU demand forecasting methods which involve the processing of large

Sun, Yu

471

Grain Sorghum Production in Texas.  

E-Print Network [OSTI]

. . .- - . . paper 1 the s corn with a rghum rctrose, FIGURE 3. THE BLUEBONNET PLANT OF THE CORN PRODUCTS REFINING COMPANY, CORPUS CHRISTI, TEI'"" 6 clextrose sirup, edible oil, several by-products and t~o livestock feed?. Plants at Plainview, Texas, 1... ................................................................ ................. Industrial Uses %. 6 ................................................................. ................ Sorghum Culture -; . :: 7 ...................................................... Land Preparation . Planting and Cultivation 7...

Quinby, J. R.; Kramer, N. W.; Stephens, J. C.; Lahr, K. A.; Karper, R. E.

1958-01-01T23:59:59.000Z

472

Covered Product Category: Fluorescent Ballasts  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including fluorescent ballasts, which are a FEMP-designated product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

473

Reducing carbon dioxide to products  

DOE Patents [OSTI]

A method reducing carbon dioxide to one or more products may include steps (A) to (C). Step (A) may bubble said carbon dioxide into a solution of an electrolyte and a catalyst in a divided electrochemical cell. The divided electrochemical cell may include an anode in a first cell compartment and a cathode in a second cell compartment. The cathode may reduce said carbon dioxide into said products. Step (B) may adjust one or more of (a) a cathode material, (b) a surface morphology of said cathode, (c) said electrolyte, (d) a manner in which said carbon dioxide is bubbled, (e), a pH level of said solution, and (f) an electrical potential of said divided electrochemical cell, to vary at least one of (i) which of said products is produced and (ii) a faradaic yield of said products. Step (C) may separate said products from said solution.

Cole, Emily Barton; Sivasankar, Narayanappa; Parajuli, Rishi; Keets, Kate A

2014-09-30T23:59:59.000Z

474

Virtual data in CMS production  

SciTech Connect (OSTI)

Initial applications of the GriPhyN Chimera Virtual Data System have been performed within the context of CMS Production of Monte Carlo Simulated Data. The GriPhyN Chimera system consists of four primary components: (1) a Virtual Data Language, which is used to describe virtual data products, (2) a Virtual Data Catalog, which is used to store virtual data entries, (3) an Abstract Planner, which resolves all dependencies of a particular virtual data product and forms a location and existence independent plan, (4) a Concrete Planner, which maps an abstract, logical plan onto concrete, physical grid resources accounting for staging in/out files and publishing results to a replica location service. A CMS Workflow Planner, MCRunJob, is used to generate virtual data products using the Virtual Data Language. Subsequently, a prototype workflow manager, known as WorkRunner, is used to schedule the instantiation of virtual data products across a grid.

Arbree, A. et al.

2004-08-26T23:59:59.000Z

475

Vol. 18, No. 3, 2008, Nuclear Physics News 3 The views expressed here do not represent the views and policies of NuPECC except where explicitly identified.  

E-Print Network [OSTI]

editorial Vol. 18, No. 3, 2008, Nuclear Physics News 3 The views expressed here do not represent, nuclear physics seemed to be lacking in the theoretical tools required to go beyond a qualitative. Furthermore, rather than borrowing freely from related fields of research, nuclear physics drifted in the dol

Washington at Seattle, University of - Department of Physics, Electroweak Interaction Research Group

476

The Cornell Center for a Sustainable Future (CCSF) represents a bold commitment to develop and deploy knowledge to address some of society's most complex and press-  

E-Print Network [OSTI]

with CCSF. Through partnerships with Cornell's colleges, CCSF aspires to help build an even larger community#12;The Cornell Center for a Sustainable Future (CCSF) represents a bold commitment to develop and deploy knowledge to address some of society's most complex and press- ing problems. Sustainability

Angenent, Lars T.

477

Representative Syllabus for P140 Prof. Sandra Shapshay P140 M/W 11:15pm-12:05pm Woodburn Hall 009  

E-Print Network [OSTI]

Representative Syllabus for P140 Prof. Sandra Shapshay P140 M/W 11:15pm-12:05pm Woodburn Hall 009-10:30am, SY 021 Syllabus: P140 Introduction to Ethics Welcome to Introduction to Ethics. This is a lecture

Indiana University

478

hollow fiber represent an enormous increase in the (active) aeration surface. Thus, oxygen is not limiting to cell growth, which results in  

E-Print Network [OSTI]

- ditions oxygen and carbon dioxide diffuse from the hollow-fiber membrane into the cell suspensionhollow fiber represent an enormous increase in the (active) aeration surface. Thus, oxygen In controlled cultivation systems, such as common stirred tank bioreactors, an optimal oxygen supply is state

Cai, Long

479

To obtain representative temperatures, sensors were made with a length of 35 cm. The stainless steel needles have a diameter of 3 mm. Inside are five  

E-Print Network [OSTI]

To obtain representative temperatures, sensors were made with a length of 35 cm. The stainless steel needles have a diameter of 3 mm. Inside are five Platinum Pt-100 sensors, that are cascaded in series to obtain a Pt-500 sensor. The sensors are calibrated to retrieve individual calibration

Haak, Hein

480

8 2168-6831/13/$31.002013IEEE ieee Geoscience and remote sensinG maGazine December 2013 Abstract--Earth observing satellites represent some  

E-Print Network [OSTI]

and remote sensinG maGazine communities, and industry sectors including mining, fisheries, and transportation--Earth observing satellites represent some of the most valued components of the international Global Ocean of the Integrated Ocean Observing System (IOOS), required to carry out advanced coastal and ocean research

Note: This page contains sample records for the topic "markups representing product" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Representing a 3-D Environment with a 2-D Map Structure Edward H.L. Fong William Adams Frederick Crabbe Alan C. Schultz  

E-Print Network [OSTI]

planning, and localization. II. THE EVIDENCE GRID A wide variety of map representation structures (such Grid The 2-D evidence grid is one of the most popular map structures for autonomous mobile robotsRepresenting a 3-D Environment with a 2Ĺ-D Map Structure Edward H.L. Fong William Adams Frederick

Crabbe, Frederick

482

The Human Factors and Ergonomics EFA The field of Human Factors and Ergonomics (HFE) represents an increasingly important engineering specialty. The  

E-Print Network [OSTI]

The Human Factors and Ergonomics EFA The field of Human Factors and Ergonomics (HFE) represents cognitive characteristics and ergonomics considers physical characteristics. The HFE EFA builds allow for an emphasis in human factors (HF) or ergonomics (Ergo). Required courses: Semester Course

Kusiak, Andrew

483

Sensor networks represent new paradigm for reliable environment monitoring and infor-mation collection. They hold the promise of revolutionizing sensing in a wide range of  

E-Print Network [OSTI]

computing power, scarce memory and limited battery power. For wireless micro-sensor networks, physical of wireless micro-sensor networks communication models. 2. Development of a frame-work to evaluate protocolsAbstract Sensor networks represent new paradigm for reliable environment monitoring and infor

Heinzelman, Wendi

484

Ceramic Hosts for Fission Products Immobilization  

SciTech Connect (OSTI)

Natural spinel, perovskite and zirconolite rank among the most leach resistant of mineral forms. They also have a strong affinity for a large number of other elements and including actinides. Specimens of natural perovskite and zirconolite were radioisotope dated and found to have survived at least 2 billion years of natural process while still remain their loading of uranium and thorium . Developers of the Synroc waste form recognized and exploited the capability of these minerals to securely immobilize TRU elements in high-level waste . However, the Synroc process requires a relatively uniform input and hot pressing equipment to produce the waste form. It is desirable to develop alternative approaches to fabricate these durable waste forms to immobilize the radioactive elements. One approach is using a high temperature process to synthesize these mineral host phases to incorporate the fission products in their crystalline structures. These mineral assemblages with immobilized fission products are then isolated in a durable high temperature glass for periods measured on a geologic time scale. This is a long term research concept and will begin with the laboratory synthesis of the pure spinel (MgAl2O4), perovskite (CaTiO3) and zirconolite (CaZrTi2O7) from their constituent oxides. High temperature furnace and/or thermal plasma will be used for the synthesis of these ceramic host phases. Nonradioactive strontium oxide will be doped into these ceramic phases to investigate the development of substitutional phases such as Mg1-xSrxAl2O4, Ca1-xSrxTiO3 and Ca1-xSrxZrTi2O7. X-ray diffraction will be used to establish the crystalline structures of the pure ceramic hosts and the substitution phases. Scanning electron microscopy and energy dispersive X-ray analysis (SEM-EDX) will be performed for product morphology and fission product surrogates distribution in the crystalline hosts. The range of strontium doping is planned to reach the full substitution of the divalent metal ions, Mg and Ca, in the ceramic host phases. The immobilization of rear earth (lanthanide series) fission products in these ceramic host phases will also be studied this year. Cerium oxide is chosen to represent the rear earth fission product for substitution studies in spinel, perovskite and zirconolite ceramic hosts. Cerium has +3 and +4 oxidation states and it can replace some of the trivalent or tetravalent host ions to produce the substitution ceramics such as MgAl2-xCexO4, CaTi1-xCexO3, CaZr1-xCexTi2O7 and CaZrTi2-xCexO7. X-ray diffraction analysis will be used to compare the crystalline structures of the pure ceramic hosts and the substitution phases. SEM-EDX analysis will be used to study the Ce distribution in the ceramic host phases. The range of cerium doping is planned to reach the full substitution of the trivalent or tetravalent ions, Al, Ti and Zr, in the ceramic host phases.

Peter C Kong

2010-07-01T23:59:59.000Z

485

Advanced Multi-Product Coal Utilization By-Product Processing Plant  

SciTech Connect (OSTI)

The overall objective of this project is to design, construct, and operate an ash beneficiation facility that will generate several products from coal combustion ash stored in a utility ash pond. The site selected is LG&E's Ghent Station located in Carroll County, Kentucky. The specific site under consideration is the lower ash pond at Ghent, a closed landfill encompassing over 100 acres. Coring activities revealed that the pond contains over 7 million tons of ash, including over 1.5 million tons of coarse carbon and 1.8 million tons of fine (<10 {micro}m) glassy pozzolanic material. These potential products are primarily concentrated in the lower end of the pond adjacent to the outlet. A representative bulk sample was excavated for conducting laboratory-scale process testing while a composite 150 ton sample was also excavated for demonstration-scale testing at the Ghent site. A mobile demonstration plant with a design feed rate of 2.5 tph was constructed and hauled to the Ghent site to evaluate unit processes (i.e. primary classification, froth flotation, spiral concentration, secondary classification, etc.) on a continuous basis to determine appropriate scale-up data. Unit processes were configured into four different flowsheets and operated at a feed rate of 2.5 tph to verify continuous operating performance and generate bulk (1 to 2 tons) products for product testing. Cementitious products were evaluated for performance in mortar and concrete as well as cement manufacture process addition. All relevant data from the four flowsheets was compiled to compare product yields and quality while preliminary flowsheet designs were generated to determine throughputs, equipment size specifications and capital cost summaries. A detailed market study was completed to evaluate the potential markets for cementitious products. Results of the study revealed that the Ghent local fly ash market is currently oversupplied by more than 500,000 tpy and distant markets (i.e. Florida) are oversupplied as well. While the total US demand for ultrafine pozzolan is currently equal to demand, there is no reason to expect a significant increase in demand. Despite the technical merits identified in the pilot plant work with regard to beneficiating the entire pond ash stream, market developments in the Ohio River Valley area during 2006-2007 were not conducive to demonstrating the project at the scale proposed in the Cooperative Agreement. As a result, Cemex withdrew from the project in 2006 citing unfavorable local market conditions in the foreseeable future at the demonstration site. During the Budget Period 1 extensions provided by the DOE, CAER has contacted several other companies, including cement producers and ash marketing concerns for private cost share. Based on the prevailing demand-supply situation, these companies had expressed interest only in limited product lines, rather than the entire ash beneficiation product stream. Although CAER had generated interest in the technology, a financial commitment to proceed to Budget Period 2 could not be obtained from private companies. Furthermore, the prospects of any decisions being reached within a reasonable time frame were dim. Thus, CAER concurred with the DOE to conclude the project at the end of Budget Period 1, March 31, 2007. The activities presented in this report were carried out during the Cooperative Agreement period 08 November 2004 through 31 March 2007.

Thomas Robl; John Groppo

2009-06-30T23:59:59.000Z

486

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS  

SciTech Connect (OSTI)

The purpose of this DOE-funded effort is to develop technologies for carbon products from coal-derived feedstocks. Carbon products can include precursor materials such as solvent extracted carbon ore (SECO) and synthetic pitch (Synpitch). In addition, derived products include carbon composites, fibers, foams and others. Key milestones included producing hydrogenated coal in the Hydrotreating Facility for the first time. The facility is now operational, although digital controls have not yet been completely wired. In addition, ultrasound is being used to investigate enhanced dissolution of coal. Experiments have been carried out.

Dady Dadyburjor; Chong Chen; Elliot B. Kennel; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2006-02-23T23:59:59.000Z

487

Tensor-product vs. geometric-product coding  

E-Print Network [OSTI]

Quantum computation is based on tensor products and entangled states. We discuss an alternative to the quantum framework where tensor products are replaced by geometric products and entangled states by multivectors. The resulting theory is analogous to quantum computation but does not involve quantum mechanics. We discuss in detail similarities and differences between the two approaches and illustrate the formulas by explicit geometric objects where multivector versions of the Bell-basis, GHZ, and Hadamard states are visualized by means of colored oriented polylines.

Diederik Aerts; Marek Czachor

2007-09-10T23:59:59.000Z

488

Leaching of Phase II Mercury Control Technology By-Products  

SciTech Connect (OSTI)

The U.S. EPA has issued a final regulation for control of mercury from coal-fired power plants. An NETL research, development and demonstration program under DOE/Fossil Energy Innovations for Existing Plants is directed toward the improvement of the performance and economics of mercury control from coal-fired plants. The current Phase II of the RD&D program emphasizes the evaluation of performance and cost of control technologies through slip-stream and full scale field testing while continuing the development of novel concepts. One of the concerns of the NETL program is the fate of the captured flue gas mercury which is transferred to the condensed phase by-product stream. These adulterated by-products, both ashes and FGD material, represent the greatest challenge to the DOE goal of increased utilization of by-products. The degree of stability of capture by-products and their potential for release of mercury can have a large economic impact on material sales or the approach to disposal. One of the considerations for mercury control technology is the potential trade-off between effective but temporary mercury capture and less effective but more permanent sequestration. As part of a greater characterization effort of Phase II facility baseline and control technology sample pairs, NETL in-house laboratories have performed aqueous leaching procedures on a select subset of the available sample pairs. This report describes batch leaching results for mercury, arsenic, and selenium.

Hesbach, P.A.; Kachur, E.K.

2007-07-01T23:59:59.000Z

489

Screening Prosopis (mesquite) germplasm for biomass production and nitrogen fixation  

SciTech Connect (OSTI)

The nitrogen-fixing trees of the genus Prosopis (mesquite or algaroba) are well adapted to the semi-arid and often saline regions of the world. These trees may produce firewood or pods for livestock food, they may stabilize sand dunes and they may enrich the soil by production of leaf litter supported by nitrogen fixation. A collection of nearly 500 Prosopis accessions representing North and South American and African germplasm has been established. Seventy of these accessions representing 14 taxa are being grown under field conditions where a 30-fold range in biomass productivity among accessions has been estimated. In a greehouse experiment, 13 Prosopis taxa grew on nitrogen-free medium nodulated, and had a 10-fold difference in nitrogen fixation (acetylene reduction). When Prosopis is propagated by seed the resulting trees are extremely variable in growth rate and presence or absence of thorns. Propagation of 6 Prosopis taxa by stem cuttings has been achieved with low success (1 to 10%) in field-grown plants and with higher success (50 to 100%) with young actively growing greenhouse plants.

Felker, P.; Cannell, G.H.; Clark, P.R.; Osborn, J.F.

1980-01-01T23:59:59.000Z

490

Studying Z/gamma*+Jet Production  

SciTech Connect (OSTI)

The production of jets in association with a Z/{gamma}* boson is an example of an important class of processes at hadron colliders, namely vector boson + jet (V + jet) production. Comparisons of measurements of this class of processes with theory predictions constitute an important, fundamental test of the Standard Model of particle physics, and of the theory of QCD in particular. While having a smaller cross section than other V +jet processes, Z/{gamma}*({yields} e{sup +}e{sup -}) + jets production, with Z/{gamma}* {yields} e{sup +}e{sup -}/{mu}{sup +}{mu}{sup -}, has a distinct experimental signature allowing for measurements characterized by low backgrounds and a direct, precise measurement of the properties of the decay products of the Z/{gamma}* boson. In this thesis, several new measurements of the properties of jets produced in association with a Z/{gamma}* boson in p{bar p} collisions at {radical}s = 1.96 TeV are presented. The cross section for Z/{gamma}*({yields} e{sup +}e{sup -}) + N jet production (N {le} 3) is measured, differential in the transverse momentum of the Nth jet in the event, normalized to the inclusive Z/{gamma}* cross section. Also, the cross section for Z/{gamma}*({yields} e{sup +}e{sup -}) + N jets (N {ge} 1) is measured, differential in the difference in azimuthal angle between the di-electron system and any jet in the event, normalized to unity. The data used in the measurements were collected by the D0 experiment located at the Tevatron Collider of the Fermi National Accelerator Laboratory and correspond to an integrated luminosity of 1.04 fb{sup -1}. The measured jet transverse momentum spectra are compared with the predictions of perturbative calculations at the next-to-leading order in the strong coupling constant. Given the low sensitivity of the calculations to model parameters, these comparisons represent a stringent test of perturbative QCD. One of the main goals currently being pursued in particle physics is the discovery of the only particle predicted by the Standard Model which has so far no been detected experimentally, namely the Higgs boson. It is assumed that the ATLAS and CMS experiments located at the Large Hadron Collider (LHC), a proton-proton collider at {radical}s = 14 TeV, will be able to detect the Higgs boson, or rule out its existence, within the next few years. The collisions delivered by the LHC will also be used to perform a long range of searches for other new particles, for instance particles predicted by models based on the principle of supersymmetry. The associated production of vector bosons with jets has relatively large production rates at the LHC and can produce a long list of different final states which can include charged leptons, missing transverse energy, as well as light- and heavy-flavour jets. This makes V + jet production a major source of background events to many searches for new particles. Most techniques used for estimating the expected number of background events to searches rely on passing the stable final-state particles of simulated hadron collisions generated using a so-called event generator code, through a simulation of the experimental detector system. The development of event generators which are capable of reliably predicting the properties of jets produced in association with a core process, e.g. the production of a vector boson, has been the subject of a large amount of research activity during the last ten years. These efforts have led to the appearance of the CKKW and MLM algorithms which are implemented in several event generators, among them SHERPA and ALPGEN + PYTHIA. The large data sample collected by the D0 experiment during Run II offers an excellent opportunity for validating these new event generators against experimental measurements of V + jet production. As argued above, the Z/{gamma}*({yields} e{sup +}e{sup -}) + jets process offers the combination of a clean experimental signature and large production rates, making it the process of choice for these studies.

Nilsen, Henrik Wold; /Freiburg U.

2009-07-01T23:59:59.000Z

491

Cross product in N Dimensions - the doublewedge product  

E-Print Network [OSTI]

The cross product frequently occurs in Physics and Engineering, since it has large applications in many contexts, e.g. for calculating angular momenta, torques, rotations, volumes etc. Though this mathematical operator is widely used, it is commonly expressed in a 3-D notation which gives rise to many paradoxes and difficulties. In fact, instead of other vector operators like scalar product, the cross product is defined just in 3-D space, it does not respect reflection rules and invokes the concept of "handedness". In this paper we are going to present an extension of cross product in an arbitrary number N of spatial Dimensions, different from the one adopted in the Exterior Algebra and explicitly designed for an easy calculus of moments.

Carlo Andrea Gonano; Riccardo Enrico Zich

2014-07-21T23:59:59.000Z

492

The production of iron carbide  

SciTech Connect (OSTI)

From start-up in 1994 to present, Nucor`s Iron Carbide plant has overcome many obstacles in achieving design production. Many of these impediments were due to flaws in equipment design. With the integration existing within the plant, limitations in any one system reduced the operating capacity of others. For this reason, as modifications were made and system capacities were increased, the need for additional modifications became apparent. Subsequently, operating practices, maintenance scheduling, employee incentives, and production objectives were continually adapted. This paper discusses equipment and design corrections and the quality issues that contributed to achieving the plant`s production capacity.

Anderson, K.M.; Scheel, J. [Nucor Iron Carbide, Inc., Point Lisas (Trinidad and Tobago)

1997-12-31T23:59:59.000Z

493

Production Specialist mFoundry needs a talented Production Specialist to work on our product development team. The  

E-Print Network [OSTI]

and research for new or complementary products areas. ∑ Support the sales and client services teams throughProduction Specialist mFoundry needs a talented Production Specialist to work on our product development team. The Mobile Production Specialist is responsible for providing graphic and technical

Ravikumar, B.

494

Insulation products promote thermal efficiency  

SciTech Connect (OSTI)

The judicious use of thermal insulation products in non-residential buildings can provide a number of advantages including increased energy efficiency, lower first costs (by avoiding overside HVAC systems), improved fire safety and better acoustics. Thermal insulation products are those products which retard the flow of heat energy. Materials include glass, plastics, and organic materials such as wood fibers, vermiculite and perlite. Forms range from the familiar batts and blankets of glass fibers to foamed plastic, rigid boards, losse fill and systems combining two or more products, such as polystyrene boards covered with insulating plaster. The R values of selected insulation materials with a cost/sq. ft. of each material at R 10 are given. Costs cover both the material and installation and may vary depending on local conditions.

Chalmers, R.

1985-04-01T23:59:59.000Z

495

Production, Storage, and FC Analysis  

Broader source: Energy.gov [DOE]

Presentation on Production, Storage, and FC Analysis to the DOE Systems Analysis Workshop held in Washington, D.C. July 28-29, 2004 to discuss and define role of systems analysis in DOE Hydrogen Program.

496

Xcel Energy- Solar Production Incentive  

Broader source: Energy.gov [DOE]

Beginning in 2014, Xcel must offer a solar production incentive for systems 20 kW-DC or less. The customer's system capacity may not be more than 120% of the customer's on-site annual energy...

497

Optimizing Profits from Hydroelectricity Production  

E-Print Network [OSTI]

Optimizing Profits from Hydroelectricity Production Daniel De Ladurantaye Michel Gendreau Jean the profits obtained by the stochastic model. Keywords: Hydroelectricity, electricity market, prices, dams countries deregulate their electricity market, new challenges appear for hydroelectricity producers

Potvin, Jean-Yves

498

Continuous production of conducting polymer  

E-Print Network [OSTI]

A device to continuously produce polypyrrole was designed, manufactured, and tested. Polypyrrole is a conducting polymer which has potential artificial muscle applications. The objective of continuous production was to ...

Gaige, Terry A. (Terry Alden), 1981-

2004-01-01T23:59:59.000Z

499

Strangeness Production at the SPS  

E-Print Network [OSTI]

Systematic studies on the production of strange hyperons and the phi meson as a function of beam energy and system size performed by the NA49 collaboration are discussed. Hadronic transport models fail to describe the production of multi strange particles (Xi, Omega), while statistical models are generally in good agreement to the measured particle yields at all energies. The system size dependence is well reproduced by the core-corona approach. New data on K*(892) production are presented. The yields of these short-lived resonances are significantly below the statistical model expectation. This is in line with the interpretation that the measurable yields are reduced due to rescattering of their decay products inside the fireball.

C. Blume; for the NA49 Collaboration

2009-11-06T23:59:59.000Z

500

Lightning Arrestor Connectors Production Readiness  

SciTech Connect (OSTI)

The Lightning Arrestor Connector (LAC), part ďMĒ, presented opportunities to improve the processes used to fabricate LACs. The A## LACs were the first production LACs produced at the KCP, after the product was transferred from Pinnellas. The new LAC relied on the lessons learned from the A## LACs; however, additional improvements were needed to meet the required budget, yield, and schedule requirements. Improvement projects completed since 2001 include Hermetic Connector Sealing Improvement, Contact Assembly molding Improvement, development of a second vendor for LAC shells, general process improvement, tooling improvement, reduction of the LAC production cycle time, and documention of the LAC granule fabrication process. This report summarizes the accomplishments achieved in improving the LAC Production Readiness.

Marten, Steve; Linder, Kim; Emmons, Jim; Gomez, Antonio; Hasam, Dawud; Maurer, Michelle

2008-10-20T23:59:59.000Z