Sample records for map location building

  1. Location Map

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Lane, Michael

    Map file package containing shaded relief base with Hot Pot project area, major roads, railroads, and rivers. The inset map shows regional Paleozoic structural elements.

  2. Location Map

    SciTech Connect (OSTI)

    Lane, Michael

    2013-06-27T23:59:59.000Z

    Map file package containing shaded relief base with Hot Pot project area, major roads, railroads, and rivers. The inset map shows regional Paleozoic structural elements.

  3. John Snow Cholera Map as Rectified Raster Data, Water Pump Location Data, Deaths by Building Data

    E-Print Network [OSTI]

    Houser, Rhonda

    2013-01-31T23:59:59.000Z

    Raster data of John Snow's Cholera Map Tags: john snow, cholera, gis Summary: This map is a GIS version of John Snow's original cholera map. The map was georectified from a scanned image of the original map using ESRI ArcGIS 10.1. Description...: Georectified a digital scanned version of map for teaching geospatial technicques; file can be used for teaching/ learning and research. Used ArcGIS 10.1 using ESRI World Street Map from ArcGIS Online; created 15 control points which resulted in total RMS of ca...

  4. Building Address Locations -Assumes entire

    E-Print Network [OSTI]

    Guenther, Frank

    Building Address Locations - Assumes entire building unless noted Designation Submit through* 560, 4 BU Crosstown Center 801 Massachusetts Ave Floor 1, 2 BMC BCD Building 800 Harrison Avenue BCD BMC Biosquare III 670 Albany Floors 2, 3, 6, 7 BMC Biosquare III 670 Albany Floors 1, 4, 5, 8 BU Building

  5. Building Science-Based Climate Maps - Building America Top Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on the IECC...

  6. Building and Facility Codes Code Building Location Bldg # Coordinates

    E-Print Network [OSTI]

    Russell, Lynn

    Building and Facility Codes Code Building Location Bldg # Coordinates APM Applied Physics & Mathematics Building Muir 249 F7 ASANT Asante Hall Eleanor Roosevelt 446 F5 BIO Biology Building Muir 259 F7 BIRCH Birch Aquarium SIO 2300 S-D7 BONN Bonner Hall Revelle 131 G8 BSB Biomedical Sciences Building

  7. Constructing Buildings and Harmonic Maps

    E-Print Network [OSTI]

    Katzarkov, Ludmil; Pandit, Pranav; Simpson, Carlos

    2015-01-01T23:59:59.000Z

    In a continuation of our previous work, we outline a theory which should lead to the construction of a universal pre-building and versal building with a $\\phi$-harmonic map from a Riemann surface, in the case of two-dimensional buildings for the group $SL_3$. This will provide a generalization of the space of leaves of the foliation defined by a quadratic differential in the classical theory for $SL_2$. Our conjectural construction would determine the exponents for $SL_3$ WKB problems, and it can be put into practice on examples.

  8. SFSU Building Coordinators List College or Administrative Unit Location(s)

    E-Print Network [OSTI]

    SFSU Building Coordinators List College or Administrative Unit Location(s) Building Coordinator81193 cathym@sfsu.edu GYM 102B Student Services Building SSB Mirel Tikkanen x53566 mtikkane@sfsu.edu SSB

  9. Distributed Route Planning Using Partial Map-Building Christine Alvarado

    E-Print Network [OSTI]

    Distributed Route Planning Using Partial Map-Building Christine Alvarado Senior Honors Thesis in a known location in space. Our tools include a system of manipulation robots, which are "blind" and one;2 1 Introduction The work presented in this thesis is based on the desire to solve the moving problem

  10. Wavelet Occupancy Grids: a Method for Compact Map Building

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Wavelet Occupancy Grids: a Method for Compact Map Building Manuel Yguel, Olivier Aycard for multi-resolution map building based on wavelets, which we call the wavelet occupancy grid (WavOG). Pai representation and data storage for large maps, under the constraints of multi-sensor real-time updates

  11. Technology Mapping of the Renewable Energy, Buildings and Transport...

    Open Energy Info (EERE)

    Technology Mapping of the Renewable Energy, Buildings and Transport Sectors: Policy Drivers and International Trade Aspects Jump to: navigation, search Tool Summary LAUNCH TOOL...

  12. Online map of buildings using radiant technologies

    E-Print Network [OSTI]

    Karmann, Caroline; Schiavon, Stefano; Bauman, Fred

    2014-01-01T23:59:59.000Z

    of radiant slab cooling using building simulation and fieldmeasurements. Energy and Buildings, 41, 3, 320-330.2013) Net-Zero Energy Buildings - Worldwide. Available at:

  13. a r r i o r BUILDING# NAME LOCATION

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    Admissions Parking Palmer Lake B l a c k W a r r i o r R i v e r BUILDING# NAME LOCATION 3430 1FamilyResearchClinic 10-F 5016 ChildDevelopmentResearchCenter 10-L 1040 ClarkHall 8-E 6082 ColemanColiseum 15-G 6086 Crisp

  14. a r r i o r BUILDING# NAME LOCATION

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    Palmer Lake B l a c k W a r r i o r R i v e r BUILDING# NAME LOCATION 3430 1North 3-I 5020 600 1052 Ceramics 8-F 1160 ChildandFamilyResearchClinic 10-F 5016 ChildDevelopmentResearchCenter 10-L 1040

  15. Buildings by Name Bldg No Map Grid Func ons & Places Bldg No or Map

    E-Print Network [OSTI]

    #12;Buildings by Name Bldg No Map Grid Func ons & Places Bldg No or Map Grid Bldg No Buildings by Number Map Grid 1320 E San Pasqual (Caltech Y) 56 E4 24-Hour Security 66 1 Brown Gymnasium B5 1350 E San

  16. Iterative-build OMIT maps: map improvement by iterative model building and refinement without model bias

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Grosse-Kunstleve, Ralf W.; Afonine, Pavel V.; Moriarty, Nigel W.; Adams, Paul D. [Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720 (United States); Read, Randy J. [Department of Haematology, University of Cambridge, Cambridge CB2 0XY (United Kingdom); Zwart, Peter H. [Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720 (United States); Hung, Li-Wei [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2008-05-01T23:59:59.000Z

    An OMIT procedure is presented that has the benefits of iterative model building density modification and refinement yet is essentially unbiased by the atomic model that is built. A procedure for carrying out iterative model building, density modification and refinement is presented in which the density in an OMIT region is essentially unbiased by an atomic model. Density from a set of overlapping OMIT regions can be combined to create a composite ‘iterative-build’ OMIT map that is everywhere unbiased by an atomic model but also everywhere benefiting from the model-based information present elsewhere in the unit cell. The procedure may have applications in the validation of specific features in atomic models as well as in overall model validation. The procedure is demonstrated with a molecular-replacement structure and with an experimentally phased structure and a variation on the method is demonstrated by removing model bias from a structure from the Protein Data Bank.

  17. Iterative build OMIT maps: Map improvement by iterative model-building and refinement without model bias

    SciTech Connect (OSTI)

    Los Alamos National Laboratory, Mailstop M888, Los Alamos, NM 87545, USA; Lawrence Berkeley National Laboratory, One Cyclotron Road, Building 64R0121, Berkeley, CA 94720, USA; Department of Haematology, University of Cambridge, Cambridge CB2 0XY, England; Terwilliger, Thomas; Terwilliger, T.C.; Grosse-Kunstleve, Ralf Wilhelm; Afonine, P.V.; Moriarty, N.W.; Zwart, P.H.; Hung, L.-W.; Read, R.J.; Adams, P.D.

    2008-02-12T23:59:59.000Z

    A procedure for carrying out iterative model-building, density modification and refinement is presented in which the density in an OMIT region is essentially unbiased by an atomic model. Density from a set of overlapping OMIT regions can be combined to create a composite 'Iterative-Build' OMIT map that is everywhere unbiased by an atomic model but also everywhere benefiting from the model-based information present elsewhere in the unit cell. The procedure may have applications in the validation of specific features in atomic models as well as in overall model validation. The procedure is demonstrated with a molecular replacement structure and with an experimentally-phased structure, and a variation on the method is demonstrated by removing model bias from a structure from the Protein Data Bank.

  18. Building Science-Based Climate Maps - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy FutureDepartment of Energy BuildingDepartment

  19. Building Content Owned Bldg # Account No. Building/Property Name Location City Value Value by State Year Built Sq Ft

    E-Print Network [OSTI]

    Arnold, Jonathan

    Building Content Owned Bldg # Account No. Building/Property Name Location City Value Value by State 48 3027 25-26-GC284-000 AGY GIN BUILDING SNOWS MILL RD WATKINSVILLE 12500 0 Y 1960 8300 3028 25-26-GC

  20. Seismic Line Location Map Hot Pot Project, Humboldt County, Nevada 2010

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Michael Lane

    Seismic Line Location Map Hot Pot Project, Humboldt County, Nevada 2010. ArcGIS map package containing topographic base map, Township and Range layer, Oski BLM and private leases at time of survey, and locations, with selected shot points, of the five seismic lines.

  1. Validation of Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled and seismic test 2012

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jaffe, Todd

    Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled & seismic test, 2012

  2. Validation of Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled and seismic test 2012

    SciTech Connect (OSTI)

    Jaffe, Todd

    2012-01-01T23:59:59.000Z

    Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled & seismic test, 2012

  3. Validation of Innovative Exploration Technologies for Newberry Volcano: Drill Site Location Map 2010

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jaffe, Todd

    Newberry project drill site location map 2010. Once the exploration mythology is validated, it can be applied throughout the Cascade Range and elsewhere to locate and develop “blind” geothermal resources.

  4. A Hierarchical Bayesian Approach to the Revisiting Problem in Mobile Robot Map Building

    E-Print Network [OSTI]

    Konolige, Kurt

    present an application of hierarchical Bayesian estimation to robot map build- ing. The revisiting problemA Hierarchical Bayesian Approach to the Revisiting Problem in Mobile Robot Map Building Dieter Fox1 occurs when a robot has to decide whether it is seeing a previously- built portion of a map

  5. Department of Innovation and Didactic Training Location: New building Faculty of education

    E-Print Network [OSTI]

    Escolano, Francisco

    Department of Innovation and Didactic Training Location: New building Faculty of education Office to the University staff) to the following address: difd@ua.es COURSE COMIC AS DIDACTIC ELEMENT II: LITERATURE

  6. Building Location Aware Apps on the iPhone

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced MaterialsEnergy,Envelope SHARE Building Envelopes MFEL.jpgiPhone

  7. Rapid model building of ?-sheets in electron-density maps

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2010-03-01T23:59:59.000Z

    A method for rapid model building of ?-sheets at moderate resolution is presented. A method for rapidly building ?-sheets into electron-density maps is presented. ?-Strands are identified as tubes of high density adjacent to and nearly parallel to other tubes of density. The alignment and direction of each strand are identified from the pattern of high density corresponding to carbonyl and C{sup ?} atoms along the strand averaged over all repeats present in the strand. The ?-strands obtained are then assembled into a single atomic model of the ?-sheet regions. The method was tested on a set of 42 experimental electron-density maps at resolutions ranging from 1.5 to 3.8 Ĺ. The ?-sheet regions were nearly completely built in all but two cases, the exceptions being one structure at 2.5 Ĺ resolution in which a third of the residues in ?-sheets were built and a structure at 3.8 Ĺ in which under 10% were built. The overall average r.m.s.d. of main-chain atoms in the residues built using this method compared with refined models of the structures was 1.5 Ĺ.

  8. igure 1. Map of N. Alaska and NW Canada Showing the Locations...

    U.S. Energy Information Administration (EIA) Indexed Site

    1. Map of Northern Alaska and Northwestern Canada Showing the Locations of the National Petroleum Reserve-Alaska (NPR-A), Arctic National Wildlife Refuge (ANWR), 1002 Area, Current...

  9. Mapping the location and configuration of nitrogen in diamond nanoparticles.

    SciTech Connect (OSTI)

    Barnard, A. S.; Sternberg, M.; Center for Nanoscale Materials; Univ. of Oxford

    2007-01-17T23:59:59.000Z

    Understanding how impurities such as nitrogen are included in diamond nanoparticles is expected to be important for use in future nanodevices, such as qubits for quantum computing. Most commercial diamond nanoparticles contain approximately 2-3% nitrogen, but it is difficult to determine experimentally whether it is located within the core or at the surface of the nanoparticles. Presented here are density functional tight-binding simulations examining the configuration and potential energy surface of substitutional nitrogen in diamond nanoparticles, directly comparing results of different sizes, shapes and surface chemistry. The results predict that nitrogen is metastable within the core of both hydrogenated and dehydrogenated particles, but that the binding energy, coordination and preferred location is dependent upon the structure of the nanoparticle as a whole.

  10. Rapid model building of ?-helices in electron-density maps

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2010-03-01T23:59:59.000Z

    A method for rapid model building of ?-helices at moderate resolution is presented. A method for the identification of ?-helices in electron-density maps at low resolution followed by interpretation at moderate to high resolution is presented. Rapid identification is achieved at low resolution, where ?-helices appear as tubes of density. The positioning and direction of the ?-helices is obtained at moderate to high resolution, where the positions of side chains can be seen. The method was tested on a set of 42 experimental electron-density maps at resolutions ranging from 1.5 to 3.8 Ĺ. An average of 63% of the ?-helical residues in these proteins were built and an average of 76% of the residues built matched helical residues in the refined models of the proteins. The overall average r.m.s.d. between main-chain atoms in the modeled ?-helices and the nearest atom with the same name in the refined models of the proteins was 1.3 Ĺ.

  11. Next Location Prediction Within a Smart Office Building Jan Petzold, Faruk Bagci, Wolfgang Trumler, and Theo Ungerer

    E-Print Network [OSTI]

    Vintan, Lucian N.

    Next Location Prediction Within a Smart Office Building Jan Petzold, Faruk Bagci, Wolfgang Trumler is notified about the probable next location of an absent office owner within a smart office building the efficiency of several prediction methods. The scenario concerns employees in an office building visiting

  12. A reciprocal space approach for locating symmetry elements in Patterson superposition maps

    SciTech Connect (OSTI)

    Hendrixson, T.

    1990-09-21T23:59:59.000Z

    A method for determining the location and possible existence of symmetry elements in Patterson superposition maps has been developed. A comparison of the original superposition map and a superposition map operated on by the symmetry element gives possible translations to the location of the symmetry element. A reciprocal space approach using structure factor-like quantities obtained from the Fourier transform of the superposition function is then used to determine the best'' location of the symmetry element. Constraints based upon the space group requirements are also used as a check on the locations. The locations of the symmetry elements are used to modify the Fourier transform coefficients of the superposition function to give an approximation of the structure factors, which are then refined using the EG relation. The analysis of several compounds using this method is presented. Reciprocal space techniques for locating multiple images in the superposition function are also presented, along with methods to remove the effect of multiple images in the Fourier transform coefficients of the superposition map. In addition, crystallographic studies of the extended chain structure of (NHC{sub 5}H{sub 5})SbI{sub 4} and of the twinning method of the orthorhombic form of the high-{Tc} superconductor YBa{sub 2}Cu{sub 3}O{sub 7-x} are presented. 54 refs.

  13. SEISMIC RISK MAPS FOR EUROCODE-8 DESIGNED BUILDINGS Thomas Ulrich1

    E-Print Network [OSTI]

    1 SEISMIC RISK MAPS FOR EUROCODE-8 DESIGNED BUILDINGS Thomas Ulrich1 , John Douglas2 , Caterina Negulescu3 There is currently a move towards seismic design maps that are risk-targeted (e.g. Luco et al of such maps relies on three independent inputs: a) seismic hazard curves derived using probabilistic seismic

  14. sMAP: Simple Measurement and Actuation for Open Buildings"

    E-Print Network [OSTI]

    California at Berkeley, University of

    , pumps, etc), Schedules" · 2291 meters/sensors" ­ Power (building, floor, lights, chiller, pumps, etc

  15. Campus Parking Map University of California

    E-Print Network [OSTI]

    Lee, Seung-Wuk

    Campus Parking Map University of California BERKELEY #12;Campus Building Locations Parking Lots/Garages Building Name Grid Building Name(Continued) Grid Building Name(Continued) Grid Grid Parking Information parking spaces are located throughout the campus; areas are indicated on the map on reverse. Bicycles

  16. Building a High-Level Dataflow System on top of Map-Reduce: The Pig Experience

    E-Print Network [OSTI]

    Olston, Christopher

    Building a High-Level Dataflow System on top of Map-Reduce: The Pig Experience Alan F. Gates, Olga are open-source projects administered by the Apache Software Foundation. This paper describes

  17. a schematic map of geographic space, e.g., campus buildings

    E-Print Network [OSTI]

    Greenberg, Saul

    a schematic map of geographic space, e.g., campus buildings moving dots show people going between of the visualized events a bubble shows an event and groups the attendees colors represent event types, e.g., red

  18. Building Local Terrain Maps Using SpatioTemporal Classification for Semantic Robot Localization

    E-Print Network [OSTI]

    Zell, Andreas

    of the environment. We describe how to efficiently integrate the classification results of each time stepBuilding Local Terrain Maps Using Spatio­Temporal Classification for Semantic Robot Localization Stefan Laible1 and Andreas Zell1 Abstract-- The correct classification of the surrounding ter- rain

  19. Camera platforms for localization and map building Henrik Stewenius, Magnus Oskarsson and Kalle Astrom

    E-Print Network [OSTI]

    Lunds Universitet

    Camera platforms for localization and map building Henrik Stewenius, Magnus Oskarsson and Kalle platform of cameras are considered. In particular we formulate and solve structure and motion problems for a few novel cases of such moving platforms. For the case of two-dimensional retina cameras (ordinary

  20. 16th Int. Conf. on Computer Graphics (GRAPHICON), Novosibirsk, Russia, July 2006 Mobile Robot Mapping and Immersive Building Simulation

    E-Print Network [OSTI]

    Latecki, Longin Jan

    Mapping and Immersive Building Simulation Rolf Lakaemper1 , Ali M. Malkawi2 , Ravi S. Srinivasan2. The CFD simulation module facilitates the prediction of building performance data based on the spatial], structural analysis [2], building performance [3,4], etc. CFD simulation is employed to iteratively solve

  1. Building and Environment 39 (2004) 879883 www.elsevier.com/locate/buildenv

    E-Print Network [OSTI]

    "after CAD." BLIS consortium (Building Lifecycle Interoperable Software) was formed with the release

  2. Assessment of the Revised 3410 Building Filtered Exhaust Stack Sampling Probe Location

    SciTech Connect (OSTI)

    Yu, Xiao-Ying; Recknagle, Kurtis P.; Glissmeyer, John A.

    2013-12-01T23:59:59.000Z

    In order to support the air emissions permit for the 3410 Building, Pacific Northwest National Laboratory performed a series of tests in the exhaust air discharge from the reconfigured 3410 Building Filtered Exhaust Stack. The objective was to determine whether the location of the air sampling probe for emissions monitoring meets the applicable regulatory criteria governing such effluent monitoring systems. In particular, the capability of the air sampling probe location to meet the acceptance criteria of ANSI/HPS N13.1-2011 , Sampling and Monitoring Releases of Airborne Radioactive Substances from the Stack and Ducts of Nuclear Facilities was determined. The qualification criteria for these types of stacks address 1) uniformity of air velocity, 2) sufficiently small flow angle with respect to the axis of the duct, 3) uniformity of tracer gas concentration, and 4) uniformity of tracer particle concentration. Testing was performed to conform to the quality requirements of NQA-1-2000. Fan configurations tested included all fan combinations of any two fans at a time. Most of the tests were conducted at the normal flow rate, while a small subset of tests was performed at a slightly higher flow rate achieved with the laboratory hood sashes fully open. The qualification criteria for an air monitoring probe location are taken from ANSI/HPS N13.1-2011 and are paraphrased as follows with key results summarized: 1. Angular Flow—The average air velocity angle must not deviate from the axis of the stack or duct by more than 20°. Our test results show that the mean angular flow angles at the center two-thirds of the ducts are smaller than 4.5? for all testing conditions. 2. Uniform Air Velocity—The acceptance criterion is that the COV of the air velocity must be ? 20% across the center two thirds of the area of the stack. Our results show that the COVs of the air velocity across the center two-thirds of the stack are smaller than 2.9% for all testing conditions. 3. Uniform Concentration of Tracer Gases—The uniformity of the concentration of potential contaminants is first tested using a tracer gas to represent gaseous effluents. The tracer is injected downstream of the fan outlets and at the junction downstream fan discharges meet. The acceptance criteria are that 1) the COV of the measured tracer gas concentration is ?20% across the center two-thirds of the sampling plane and 2) at no point in the sampling plane does the concentration vary from the mean by >30%. Our test results show that 1) the COV of the measured tracer gas concentration is < 2.9% for all test conditions and 2) at no point in the sampling plane does the concentration vary from the mean by >6.5%. 4. Uniform Concentration of Tracer Particles—Tracer particles of 10-?m aerodynamic diameter are used for the second demonstration of concentration uniformity. The acceptance criterion is that the COV of particle concentration is ? 20% across the center two thirds of the sampling plane. Our test results indicate that the COV of particle concentration is <9.9% across the center two-thirds of the sampling plane among all testing conditions. Thus, the reconfigured 3410 Building Filtered Exhaust Stack was determined to meet the qualification criteria given in the ANSI/HPS N13.1-2011 standard. Changes to the system configuration or operations outside the bounds described in this report (e.g., exhaust stack velocity changes, relocation of sampling probe, and addition of fans) may require re-testing or re-evaluation to determine compliance.

  3. PipelinePipelineJuly 2011 Volume 3, Issue 4 The Donhowe Building, located at the

    E-Print Network [OSTI]

    Webb, Peter

    to the building's mechanical and electrical systems' performance, including installing a heat pump equipped water on washing machines and water heaters, the EPA also administers a scoring system for buildings. This tool heater and optimizing the building's heating and cooling air flow rates. Energy Management intends

  4. Concurrent sessions will be in following locations. Please see the Summit map for more information on building locations.

    E-Print Network [OSTI]

    Knill, Oliver

    Management (ITSM) and the IT Infrastructure Library (ITIL). We will address WHAT ITSM and ITIL are and WHY

  5. Best Practice For the Location of Air and Thermal Boundaries in Small Commercial Buildings

    E-Print Network [OSTI]

    Cummings, J. B.; Withers, C. R.

    2000-01-01T23:59:59.000Z

    to problems with radon entry, sewer gas entry, and backdrafting and other problems related to combustion appliances. In some buildings, depressurization may become sufficiently extreme so that it is difficult to open exterior doors and combustion...

  6. Seismic Line Location Map Hot Pot Project, Humboldt County, Nevada 2010

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Lane, Michael

    Location of seismic lines carried out under DOE funded project Advanced Seismic Data Analysis Program (The Hot Pot Project).

  7. Seismic Line Location Map Hot Pot Project, Humboldt County, Nevada 2010

    SciTech Connect (OSTI)

    Lane, Michael

    2012-01-01T23:59:59.000Z

    Location of seismic lines carried out under DOE funded project Advanced Seismic Data Analysis Program (The Hot Pot Project).

  8. On the use of MapReduce to build Linguistic Fuzzy Rule Based Classification Systems for Big Data

    E-Print Network [OSTI]

    Granada, Universidad de

    fuzzy rules it is able to provide an interpretable and effective classification model. This method of Education. Fuzzy Rule Based Classification Systems (FRBCSs) [4] are potent and popular tools for patternOn the use of MapReduce to build Linguistic Fuzzy Rule Based Classification Systems for Big Data

  9. An Integrated Framework for Obstacle Mapping with See-Through Capabilities using Laser and Wireless

    E-Print Network [OSTI]

    Liebling, Michael

    of the environment (the parts that can be sensed directly by the laser scanners) using occupancy grid mapping/object map can be a 2D (or 3D) grid map of the environment, where we have zeros at locations where, for instance, occupancy grid mapping approaches [1], [5] have been proposed to build a grid map

  10. LOCATION AND MAGNETOSPHERIC MAPPING OF SATURN'S MID-LATITUDE INFRARED AURORAL OVAL

    SciTech Connect (OSTI)

    Stallard, Tom; Melin, Henrik; Cowley, Stanley W. H. [Department of Physics and Astronomy, University of Leicester, Leicester LE1 7RH (United Kingdom); Miller, Steve [Department of Physics and Astronomy, University College London, London WC1E 6BT (United Kingdom); Lystrup, Makenzie B., E-mail: tss@ion.le.ac.u [Laboratory for Atmospheric and Space Physics, University of Colorado at Boulder, CO 80303-7814 (United States)

    2010-10-10T23:59:59.000Z

    Previous observations of Saturn's infrared aurorae have shown that a mid-latitude aurora exists significantly equatorward of the main auroral oval. Here, we present new results using data from four separate observing runs in 1998, 2003, 2008, and 2010. When combined, these provide a view of the mid-latitude aurora under a considerable range of viewing conditions, allowing the first calculation of the latitudinal position of this aurora to be made. This has shown that the mid-latitude aurora is located at the magnetic footprint of the region within the magnetosphere where the initial breakdown in corotation occurs, between 3 R {sub S} and the orbit of Enceladus ({approx}3.95 R {sub S}). We also confirm that this aurora is a continuous stable feature over a period of more than a decade and that an oval morphology is likely. When combined, these results indicate that the mid-latitude auroral oval is formed by currents driven by the breakdown process within the magnetosphere, in turn caused by mass loading from the torus of Enceladus, analogous with the volcanic moon Io's dominant role in the formation of Jupiter's main auroral oval.

  11. Directions and Parking Learning and Environmental Sciences Building

    E-Print Network [OSTI]

    Amin, S. Massoud

    Directions and Parking Learning and Environmental Sciences Building University of Minnesota corner of ramp on map) and follow diagonal sidewalk to right to Learning and Environmental Sciences Building. Our offices are located in Suite 425 in the Learning and Environmental Sciences Building

  12. CC locator map

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess Stories Siteandscience, and8 FY0LinkA Look at the U.S.CBFO

  13. Driving Directions to the Student Service Building The Student Service Building (SSB) is located at 1200 W. Harrison. The nearest guest parking lot is at 1100 W.

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    of the Pavilion Building. #12;From the East 1. Exit the Eisenhower (I-290) Expressway at Ashland Avenue. 2. Go south (left) on Ashland. 3. Turn east (left) on Harrison Street. 4. After Throop Street, you

  14. Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy ManufacturingMapping theMappingMaps Sign

  15. Archive Reference Buildings by Building Type: Supermarket

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  16. Archive Reference Buildings by Building Type: Warehouse

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  17. Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The EnergyCenter (LMI-EFRC) -Publications &Tsao ·Resources » Maps

  18. Wavelets, Self-organizing Maps and Artificial Neural Nets for Predicting Energy Use and Estimating Uncertainties in Energy Savings in Commercial Buildings 

    E-Print Network [OSTI]

    Lei, Yafeng

    2010-01-14T23:59:59.000Z

    TD Effective dew point windV Wind velocity w Weights x Input signal X Regressor variables Subscripts c Cooling dew Dew point h Heating meas Measured xviii out Outdoor air post Post-retrofit pre Pre... Subject: Mechanical Engineering iii ABSTRACT Wavelets, Self-organizing Maps and Artificial Neural Nets for Predicting Energy Use and Estimating Uncertainties in Energy Savings in Commercial Buildings. (August 2009) Yafeng Lei, B.S., Tianjin...

  19. Library Locations Locations other than Main Library

    E-Print Network [OSTI]

    Library Locations Locations other than Main Library Example: Feminist Studies HQ1410 .U54 2009 University of California, Santa Barbara Library www.library.ucsb.edu Updated 3-2014 A - B.......................................6 Central M - N..................................................Arts Library (Music Building) P

  20. Archive Reference Buildings by Building Type: Primary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  1. Archive Reference Buildings by Building Type: Stand-alone retail

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  2. Archive Reference Buildings by Building Type: Small office

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  3. Archive Reference Buildings by Building Type: Large office

    Office of Energy Efficiency and Renewable Energy (EERE)

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  4. Archive Reference Buildings by Building Type: Fast food

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  5. Archive Reference Buildings by Building Type: Strip mall

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  6. Archive Reference Buildings by Building Type: Secondary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  7. Logistics W-FACE 2014 Location Day events will take place in Room 2188ME of the Mechanical Engineering Building, which is

    E-Print Network [OSTI]

    Evans, Paul G.

    Logistics W-FACE 2014 Location Day events will take place in Room 2188ME of the Mechanical-9574234 or email fgutierrez3@wisc.edu for unanswered logistical questions. #12;

  8. Logistics W-FACE 2013 Location Day events will take place in Room 1153ME of the Mechanical Engineering Building, which is

    E-Print Network [OSTI]

    Evans, Paul G.

    Logistics W-FACE 2013 Location Day events will take place in Room 1153ME of the Mechanical@wisc.edu if you have any additional logistical questions. #12;

  9. Chapter 3: Building Siting

    Broader source: Energy.gov (indexed) [DOE]

    and up, especially at doors and loading docks, requires loading docks on the south side of buildings. significant effort and energy for snow removal. Desirable locations of...

  10. Modeling and Analysis of Solar Radiation Potentials on Building Rooftops

    SciTech Connect (OSTI)

    Omitaomu, Olufemi A [ORNL; Kodysh, Jeffrey B [ORNL; Bhaduri, Budhendra L [ORNL

    2012-01-01T23:59:59.000Z

    The active application of photovoltaic for electricity generation could effectively transform neighborhoods and commercial districts into small, localized power plants. This application, however, relies heavily on an accurate estimation of the amount of solar radiation that is available on individual building rooftops. While many solar energy maps exist at higher spatial resolution for concentrated solar energy applications, the data from these maps are not suitable for roof-mounted photovoltaic for several reasons, including lack of data at the appropriate spatial resolution and lack of integration of building-specific characteristics into the models used to generate the maps. To address this problem, we have developed a modeling framework for estimating solar radiation potentials on individual building rooftops that is suitable for utility-scale applications as well as building-specific applications. The framework uses light detection and ranging (LIDAR) data at approximately 1-meter horizontal resolution and 0.3-meter vertical resolution as input for modeling a large number of buildings quickly. One of the strengths of this framework is the ability to parallelize its implementation. Furthermore, the framework accounts for building specific characteristics, such as roof slope, roof aspect, and shadowing effects, that are critical to roof-mounted photovoltaic systems. The resulting data has helped us to identify the so-called solar panel sweet spots on individual building rooftops and obtain accurate statistics of the variation in solar radiation as a function of time of year and geographical location.

  11. Plasmon Mapping in Metallic Nanostructures and its Application to Single Molecule Surface Enhanced Raman Scattering: Imaging Electromagnetic Hot-Spots and Analyte Location

    SciTech Connect (OSTI)

    Camden, Jon P

    2013-07-16T23:59:59.000Z

    A major component of this proposal is to elucidate the connection between optical and electron excitation of plasmon modes in metallic nanostructures. These accomplishments are reported: developed a routine protocol for obtaining spatially resolved, low energy EELS spectra, and resonance Rayleigh scattering spectra from the same nanostructures.; correlated optical scattering spectra and plasmon maps obtained using STEM/EELS.; and imaged electromagnetic hot spots responsible for single-molecule surface-enhanced Raman scattering (SMSERS).

  12. 200 Market Building

    High Performance Buildings Database

    Portland, OR The 200 Market Building is a high-rise built in 1973 and located in downtown Portland, Oregon. It was purchased in 1988 by its current owner, 200 Market Associates, primarily because of its optimal location in Portland's central business district. Since 1989 the building has undergone continuous improvements in multiple phases.

  13. Arizona Map for Commercial Buildings

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40CoalLease(Billion CubicPotentialNov-14 Dec-14

  14. Bradshaw Construction New Office Building

    High Performance Buildings Database

    Eldersburg, MD The New Office Building is part of an effort by Bradshaw Construction Corporation to combine office, off-site shop buildings and off-site storage yards at one consolidated location. The new site, located off Maryland Route 26, shall provide space for an office building and parking; and secured shop building and storage yard. The New Office Building Project has achieved LEED Silver certification. The office building is designed as a free standing building of approximately 8,200 square feet in area, one story in height.

  15. F. MISSION CENTER BUILDING F. MISSION CENTER BUILDING

    E-Print Network [OSTI]

    Mullins, Dyche

    F. MISSION CENTER BUILDING 153 F. MISSION CENTER BUILDING BACKGROUND The 3.06 acre Mission Center Building site is located in the northeast portion of San Francisco's Mission District on the southern half of the block bounded by 14th, Harrison, 15th and Folsom Streets. The site contains a six-story brick building

  16. Building America Webinar: High Performance Space Conditioning...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    II - Design Options for Locating Ducts within Conditioned Space Building America Webinar: High Performance Space Conditioning Systems, Part II - Design Options for Locating Ducts...

  17. Colorado State Capitol Building Geothermal Program

    Broader source: Energy.gov [DOE]

    Retrofit a large scale ground source heat pump system into a historic building located in a built up urban area.

  18. A Buildings Module for the Stochastic Energy Deployment System

    E-Print Network [OSTI]

    Marnay, Chris

    2008-01-01T23:59:59.000Z

    F.W. Dodge 1991: Building Stock Database Methodology andEnd-Use Flow Maps for the Buildings Sector, D.B. Belzer,N ATIONAL L ABORATORY A Buildings Module for the Stochastic

  19. Building Stones

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    3). Photographs by the author. Building Stones, Harrell, UEEOxford Short Citation: Harrell, 2012, Building Stones. UEE.Harrell, James A. , 2012, Building Stones. In Willeke

  20. Mapping of complex marine environments using an unmanned surface craft

    E-Print Network [OSTI]

    Leedekerken, Jacques Chadwick

    2011-01-01T23:59:59.000Z

    Recent technology has combined accurate GPS localization with mapping to build 3D maps in a diverse range of terrestrial environments, but the mapping of marine environments lags behind. This is particularly true in shallow ...

  1. About the Data in Buildings Performance Database | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Database The BPD is currently the largest publically available source of building energy performance data and contains information about the buildings location, use, and...

  2. Boston, Massachusetts Location: Boston, MA

    E-Print Network [OSTI]

    Prevedouros, Panos D.

    -recovery ventilation and water-source heat pumps Each unit has fresh air ducted independently. Each residence is warmed by a heat pump that taps the Trigen Energy Corporation steam lines that run underneath the street. #12;WallsBoston, Massachusetts #12;Location: Boston, MA Building type(s): Multi-unit residential, Retail 350

  3. FORESTRY BUILDING: BUILDING EMERGENCY PLAN

    E-Print Network [OSTI]

    FORESTRY BUILDING: BUILDING EMERGENCY PLAN Date Adopted: August 18, 2009 Date Revised June 17, 2013 Prepared By: Diana Evans and Jennifer Meyer #12;PURDUE UNIVERSITY BUILDING EMERGENCY PLAN VERSION 3 2 Table Suspension or Campus Closure SECTION 3: BUILDING INFORMATION 3.1 Building Deputy/Alternate Building Deputy

  4. Reference Buildings by Building Type: Small Hotel

    Office of Energy Efficiency and Renewable Energy (EERE)

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  5. Reference Buildings by Building Type: Large Hotel

    Office of Energy Efficiency and Renewable Energy (EERE)

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  6. BUILDING NAME HEYDON-LAURENCE BUILDING

    E-Print Network [OSTI]

    Viglas, Anastasios

    BUILDING NAME HEYDON-LAURENCE BUILDING PHARMACY AND BANK BUILDING JOHN WOOLEY BUILDING OLD TEARCHER'S BUILDING PHYSICS BUILDING BAXTER'S LODGE INSTITUTE BUILDING CONSERVATION WORKS R.D.WATT BUILDING MACLEAY BUILDING THE QUARANGLE BADHAM BUILDING J.D. STEWART BUILDING BLACKBURN BUILDING MADSEN BUILDING STORE

  7. Archived Reference Building Type: Primary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  8. Archived Reference Building Type: Outpatient health care

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  9. Archived Reference Building Type: Strip mall

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  10. Archived Reference Building Type: Medium office

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  11. Archived Reference Building Type: Secondary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  12. Around Buildings

    E-Print Network [OSTI]

    Treib, Marc

    1987-01-01T23:59:59.000Z

    Around Buildings W h y startw i t h buildings and w o r k o u t wa r d ? For one, buildings are difficult t o a v o i d these

  13. Doing Well by Doing Good? Green Office Buildings

    E-Print Network [OSTI]

    Eichholtz, Piet; Kok, Nils; Quigley, John M.

    2009-01-01T23:59:59.000Z

    clusters as distinct. That is, 694 rated buildings and7,411 control buildings, each located within 1,300feet of a rated building. VOL. 100 NO. 5 EICHHOLTZ ET AL. :

  14. BUILDING INSPECTION Building, Infrastructure, Transportation

    E-Print Network [OSTI]

    BUILDING INSPECTION Building, Infrastructure, Transportation City of Redwood City 1017 Middlefield Sacramento, Ca 95814-5514 Re: Green Building Ordinance and the Building Energy Efficiency Standards Per of Redwood City enforce the current Title 24 Building Energy Efficiency Standards as part

  15. Map-likelihood phasing

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Bioscience Division, Mail Stop M888, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2001-12-01T23:59:59.000Z

    A map-likelihood function is described that can yield phase probabilities with very low model bias. The recently developed technique of maximum-likelihood density modification [Terwilliger (2000 ?), Acta Cryst. D56, 965–972] allows a calculation of phase probabilities based on the likelihood of the electron-density map to be carried out separately from the calculation of any prior phase probabilities. Here, it is shown that phase-probability distributions calculated from the map-likelihood function alone can be highly accurate and that they show minimal bias towards the phases used to initiate the calculation. Map-likelihood phase probabilities depend upon expected characteristics of the electron-density map, such as a defined solvent region and expected electron-density distributions within the solvent region and the region occupied by a macromolecule. In the simplest case, map-likelihood phase-probability distributions are largely based on the flatness of the solvent region. Though map-likelihood phases can be calculated without prior phase information, they are greatly enhanced by high-quality starting phases. This leads to the technique of prime-and-switch phasing for removing model bias. In prime-and-switch phasing, biased phases such as those from a model are used to prime or initiate map-likelihood phasing, then final phases are obtained from map-likelihood phasing alone. Map-likelihood phasing can be applied in cases with solvent content as low as 30%. Potential applications of map-likelihood phasing include unbiased phase calculation from molecular-replacement models, iterative model building, unbiased electron-density maps for cases where 2F{sub o} ? F{sub c} or ?{sub A}-weighted maps would currently be used, structure validation and ab initio phase determination from solvent masks, non-crystallographic symmetry or other knowledge about expected electron density.

  16. RECYCLING PROGRAM TYPE LOCATION ALLOWED NOT ALLOWED

    E-Print Network [OSTI]

    Miami, University of

    RECYCLING PROGRAM TYPE LOCATION ALLOWED NOT ALLOWED Batteries, toner, ink cartridges & cell phones and recycling is an important part of that effort. Below is a guide to on-campus recycling at RSMAS: Visit http://www.rsmas.miami.edu/msgso/ for map of recycling bin locations. NOTE: This is not an exhaustive list. If unauthorized items are found

  17. Updating the WWEL mapping system to improve visual analysis of earthquake distribution 

    E-Print Network [OSTI]

    Campbell, Andrew

    2010-11-24T23:59:59.000Z

    The world-wide earthquake locator is an online mapping application that maps the location and severity of earthquakes which have occurred since 1970`s. The current mapping system the site is using is beginning to look dated ...

  18. EMERGENCY RESPONSE PLAN HOGAN BUILDING

    E-Print Network [OSTI]

    Contractor, Anis

    911 for ambulance or emergency transportation. FIRE/EXPLOSION: · Extinguish any controlled open flames fire alarm station and evacuate the building. · From a safe location, dial 911 to report the fire 911 to report the natural gas leak. · Pull the nearest fire alarm station and evacuate the building

  19. Building America

    SciTech Connect (OSTI)

    Brad Oberg

    2010-12-31T23:59:59.000Z

    IBACOS researched the constructability and viability issues of using high performance windows as one component of a larger approach to building houses that achieve the Building America 70% energy savings target.

  20. Building technologies

    SciTech Connect (OSTI)

    Jackson, Roderick

    2014-07-14T23:59:59.000Z

    After growing up on construction sites, Roderick Jackson is now helping to make buildings nationwide far more energy efficient.

  1. Building technologies

    ScienceCinema (OSTI)

    Jackson, Roderick

    2014-07-15T23:59:59.000Z

    After growing up on construction sites, Roderick Jackson is now helping to make buildings nationwide far more energy efficient.

  2. Beardmore Building

    High Performance Buildings Database

    Priest River, ID Originally built in 1922 by Charles Beardmore, the building housed offices, mercantile shops, a ballroom and a theater. After decades of neglect under outside ownership, Brian Runberg, an architect and great-grandson of Charles Beardmore, purchased the building in 2006 and began an extensive whole building historic restoration.

  3. Building America Residential Buildings Energy Efficiency Meeting...

    Energy Savers [EERE]

    Building America Residential Buildings Energy Efficiency Meeting: July 2010 Building America Residential Buildings Energy Efficiency Meeting: July 2010 On this page, you may link...

  4. Current and historical sites associated with Veterinary Education in Edinburgh: Easter Bush Veterinary Centre, buildings and proposed buildings 

    E-Print Network [OSTI]

    Warwick, Colin M; Macdonald, Alastair A

    2007-01-01T23:59:59.000Z

    This poster shows the current and historical sites associated with Veterinary Education in Edinburgh and a current plan of Easter Bush Veterinary Centre with buildings, map, etc....

  5. Archived Reference Building Type: Primary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  6. Archived Reference Building Type: Outpatient health care

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  7. Archived Reference Building Type: Strip mall

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  8. Archived Reference Building Type: Medium office

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  9. Archived Reference Building Type: Secondary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  10. Autonomous underwater vehicle navigation and mapping in dynamic, unstructured environments

    E-Print Network [OSTI]

    Kunz, Clayton Gregory

    2012-01-01T23:59:59.000Z

    This thesis presents a system for automatically building 3-D optical and bathymetric maps of underwater terrain using autonomous robots. The maps that are built improve the state of the art in resolution by an order of ...

  11. ATLAS: a framework for large scale automated mapping and localization

    E-Print Network [OSTI]

    Bosse, Michael Carsten

    2004-01-01T23:59:59.000Z

    This thesis describes a scalable robotic navigation system that builds a map of the robot's environment on the fly. This problem is also known as Simultaneous Localization and Mapping (SLAM). The SLAM problem has as inputs ...

  12. Figure 3-11 South Table Mountain Utilities Map

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Existing Buildings Electrical Figure 3-11 South Table Mountain Utilities Map Sewer Communication Water Surface Drainage Storm Water WATER TANK FACILITIES QUAKER STREET OLD QUA RRY...

  13. NCBI Map Viewer Tutorial NCBI's Map Viewer can be used to visualize an organism's genome and

    E-Print Network [OSTI]

    Levin, Judith G.

    .1" link. Enter GDNF as a search term and click on the "Find" button. Filter your search result for gene sapiens (human) Build 36" link. Enter PRNP as a search term. Name the chromosome on which this gene mutated. Search for "GDNF" in the Map Viewer. Access the Human Map Viewer page by clicking on the Map

  14. Bagley University Classroom Building

    High Performance Buildings Database

    Duluth, MN, MN LEED PLATINUM CERTIFIED AND PASSIVHAUS ( certification pending) CLASSROOM BUILDING The Nature Preserve where this building is located is a contiguous natural area, 55 acres in size, deeded to the University in the 1950's for educational and recreational use. The site has hiking trails through old growth hard woods frequented by the university students as well as the public. We were charged with designing a facility to serve eight different departments for the nature portions of their teaching and study at a regional University.

  15. Jackson Park Hospital Green Building Medical Center

    SciTech Connect (OSTI)

    William Dorsey; Nelson Vasquez

    2010-03-01T23:59:59.000Z

    Jackson Park Hospital completed the construction of a new Medical Office Building on its campus this spring. The new building construction has adopted the City of Chicago�s recent focus on protecting the environment, and conserving energy and resources, with the introduction of green building codes. Located in a poor, inner city neighborhood on the South side of Chicago, Jackson Park Hospital has chosen green building strategies to help make the area a better place to live and work.

  16. INFORMATION SURFING FOR RADIATION MAP BUILDING

    E-Print Network [OSTI]

    technology in radiation detection is not well suited for the type of scenario described. Currently, searching

  17. Preliminary geohydrologic site characterization and proposed water quality well locations for WAG 4, WAG 5, WAG 3, and SWSA 1

    SciTech Connect (OSTI)

    Baughn, D.C. (MCI/Consulting Engineers, Inc., Knoxville, TN (United States))

    1987-03-01T23:59:59.000Z

    The purpose of this report is to assess general site conditions and to recommend water quality well locations at Waste Area Groupings (WAGs) 4, 5 and 3 and Solid Waste Storage Area 1 (SWSA 1) within the Oak Ridge National Laboratory (ORNL) complex. The subject sites are identified on the general site location map. For reference, the relationship of the subject sites to other WAGs are shown. WAGs are regions prescribed by Martin Marietta throughout the ORNL complex that require environmental assessment which will include design and installation of ground water monitoring systems. WAGs contain solid waste management units such as SWSAs, as well as pipelines, spill sites, buildings, ponds and experimental test sites. These solid waste management units are considered to be potential sources of contamination requiring further evaluation. This report recommends locations for water quality wells which will be installed at WAG boundaries in order to gather water quality data.

  18. Building Stones

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    was no good source of local building stone, rock was usuallyrock-cut shrines and especially tombs, and these are the sources

  19. Practical Integration Approach and Whole Building Energy Simulation of Three Energy Efficient Building Technologies: Preprint

    SciTech Connect (OSTI)

    Miller, J. P.; Zhivov, A.; Heron, D.; Deru, M.; Benne, K.

    2010-08-01T23:59:59.000Z

    Three technologies that have potential to save energy and improve sustainability of buildings are dedicated outdoor air systems, radiant heating and cooling systems and tighter building envelopes. To investigate the energy savings potential of these three technologies, whole building energy simulations were performed for a barracks facility and an administration facility in 15 U.S. climate zones and 16 international locations.

  20. Building Footprints (Shapefile) of University of Kansas, Lawrence Campus

    E-Print Network [OSTI]

    Houser, Rhonda

    2011-02-18T23:59:59.000Z

    Data layer geneated with Intention to have basic building dataset for data analysis and generation of maps, for Lawrence Campus of the University of Kansas. Building outlines were digitized using ArcMap in ca. 2007 from aerial photograph to create...

  1. Better Buildings

    E-Print Network [OSTI]

    Neukomm, M.

    2012-01-01T23:59:59.000Z

    efficiency as top priority energy resource Revolutionary change in market Robust energy efficiency industry Prime the market for new technology Better Buildings Challenge Goals Make commercial & industrial buildings 20% more efficient by 2020... opportunities for energy efficiency 2 Great opportunities in the residential, commercial and industrial sectors 20% + savings is average Other benefits: Jobs, Environment, Competitiveness But persistent barriers exist?? ?Energy efficiency...

  2. Office of Environmental Health & Safety Chemistry Building, Room B-73

    E-Print Network [OSTI]

    Linsley, Braddock K.

    inconveniences this may cause. BATTERY RECYCLING LOCATIONS (Podium Locations) This is only a partial list of the battery recycling locations on campus. ***Locations may change. Please contact your Building Manager, if you can't locate the 5 gallon Battery Recycling bucket. Please contact the Office of Environmental

  3. Automated side-chain model building and sequence assignment by template matching

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Mail Stop M888, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2003-01-01T23:59:59.000Z

    A method for automated macromolecular side-chain model building and for aligning the sequence to the map is described. An algorithm is described for automated building of side chains in an electron-density map once a main-chain model is built and for alignment of the protein sequence to the map. The procedure is based on a comparison of electron density at the expected side-chain positions with electron-density templates. The templates are constructed from average amino-acid side-chain densities in 574 refined protein structures. For each contiguous segment of main chain, a matrix with entries corresponding to an estimate of the probability that each of the 20 amino acids is located at each position of the main-chain model is obtained. The probability that this segment corresponds to each possible alignment with the sequence of the protein is estimated using a Bayesian approach and high-confidence matches are kept. Once side-chain identities are determined, the most probable rotamer for each side chain is built into the model. The automated procedure has been implemented in the RESOLVE software. Combined with automated main-chain model building, the procedure produces a preliminary model suitable for refinement and extension by an experienced crystallographer.

  4. Building America Webinar: Ventilation in Multifamily Buildings...

    Energy Savers [EERE]

    Ventilation in Multifamily Buildings Building America Webinar: Ventilation in Multifamily Buildings This webinar was presented by research team Consortium for Advanced Residential...

  5. Building America Expert Meeting: Transforming Existing Buildings...

    Energy Savers [EERE]

    Transforming Existing Buildings through New Media--An Idea Exchange Building America Expert Meeting: Transforming Existing Buildings through New Media--An Idea Exchange This report...

  6. Thebarton Campus Map Our University is smoke-free. January 2014 Download map at www.adelaide.edu.au/campuses

    E-Print Network [OSTI]

    Thebarton Campus Map Our University is smoke-free. January 2014 Download map at www.adelaide.edu.au/campuses #12;Gymnasium BUILDINGS GRID Alaska Towers D2 Bonar D6 ETSA Transformer D4 Gaskell D6 Gilbey Court E5 Railway B2 Paterson House E6 River Mansions C1 Schamm D6 Soap & Candle D6 BUILDINGS GRID Springfield House

  7. Building Science

    Broader source: Energy.gov [DOE]

    This presentation was given at the Summer 2012 DOE Building America meeting on July 25, 2012, and addressed the question ŤHow do we first do no harm with high-r enclosures??

  8. Building debris

    E-Print Network [OSTI]

    Dahmen, Joseph (Joseph F. D.)

    2006-01-01T23:59:59.000Z

    This thesis relates architectural practices to intelligent use of resources and the reuse of derelict spaces. The initial investigation of rammed earth as a building material is followed by site-specific operations at the ...

  9. Building Stones

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    1992 Are the pyramids of Egypt built of poured concreteel-Anba’ut, Red Sea coast, Egypt. Marmora 6, pp. 45 - 56.building stones of ancient Egypt are those relatively soft,

  10. Healthy buildings

    SciTech Connect (OSTI)

    Not Available

    1991-01-01T23:59:59.000Z

    This book is covered under the following headings: Healthy building strategies/productivity, Energy and design issues, Ventilation, Contaminants, Thermal, airflow, and humidity issues, School-related issues, Sources and sinks, Filtering, Operation and maintenance.

  11. Healthy buildings

    SciTech Connect (OSTI)

    Geshwiler, M.; Montgomery, L.; Moran, M. (eds.)

    1991-01-01T23:59:59.000Z

    This proceedings is of the Indoor Air Quality (IAQ) Conference held September 4--8, 1991 in Washington, D.C. Entitled the IAQ 91, Healthy Buildings,'' the major topics of discussion included: healthy building strategies/productivity; energy and design issues; ventilation; contaminants; thermal, airflow, and humidity issues; school-related issues; sources and sinks; filtering; and operation and maintenance. For these conference proceedings, individual papers are processed separately for input into the Energy Data Base. (BN)

  12. Engineering and Computing Open Day Programme 2012 Activity Time Location

    E-Print Network [OSTI]

    Berzins, M.

    Engineering and Computing Open Day Programme 2012 Activity Time Location Building Number What is Engineering? (Talk) 0900 - 0945 Electronic and Electrical Engineering, Rhodes Lecture Theatre 51 1000 - 1045 EC Stoner Building, School of Computing, Reception (Level 7) 73 Electronic Engineering (Talk) 1000

  13. Multi Robot Cooperation Based on Auction Theory With a Value Map

    E-Print Network [OSTI]

    Pozo, Angello

    2011-01-01T23:59:59.000Z

    Map Occupancy Grid . . . . . . . . Static and Dynamic Valuea location on the value map grid is only partially observed,compared. Figure 3.6: Map Occupancy Grid Next is the value

  14. Automated main-chain model building by template matching and iterative fragment extension

    SciTech Connect (OSTI)

    Terwilliger, Thomas C., E-mail: terwilliger@lanl.gov [Mail Stop M888, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2003-01-01T23:59:59.000Z

    A method for automated macromolecular main-chain model building is described. An algorithm for the automated macromolecular model building of polypeptide backbones is described. The procedure is hierarchical. In the initial stages, many overlapping polypeptide fragments are built. In subsequent stages, the fragments are extended and then connected. Identification of the locations of helical and ?-strand regions is carried out by FFT-based template matching. Fragment libraries of helices and ?-strands from refined protein structures are then positioned at the potential locations of helices and strands and the longest segments that fit the electron-density map are chosen. The helices and strands are then extended using fragment libraries consisting of sequences three amino acids long derived from refined protein structures. The resulting segments of polypeptide chain are then connected by choosing those which overlap at two or more C{sup ?} positions. The fully automated procedure has been implemented in RESOLVE and is capable of model building at resolutions as low as 3.5 Ĺ. The algorithm is useful for building a preliminary main-chain model that can serve as a basis for refinement and side-chain addition.

  15. Reference Buildings by Building Type: Outpatient health care

    Office of Energy Efficiency and Renewable Energy (EERE)

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  16. Energy use in office buildings

    SciTech Connect (OSTI)

    None

    1980-10-01T23:59:59.000Z

    This is the report on Task IB, Familiarization with Additional Data Collection Plans of Annual Survey of BOMA Member and Non-Member Buildings in 20 Cities, of the Energy Use in Office Buildings project. The purpose of the work was to monitor and understand the efforts of the Building Owners and Managers Association International (BOMA) in gathering an energy-use-oriented data base. In order to obtain an improved data base encompassing a broad spectrum of office space and with information suitable for energy analysis in greater detail than is currently available, BOMA undertook a major data-collection effort. Based on a consideration of geographic area, climate, population, and availability of data, BOMA selected twenty cities for data collection. BOMA listed all of the major office space - buildings in excess of 40,000 square feet - in each of the cities. Tax-assessment records, local maps, Chamber of Commerce data, recent industrial-development programs, results of related studies, and local-realtor input were used in an effort to assemble a comprehensive office-building inventory. In order to verify the accuracy and completeness of the building lists, BOMA assembled an Ad-Hoc Review Committee in each city to review the assembled inventory of space. A questionnaire on office-building energy use and building characteristics was developed. In each city BOMA assembled a data collection team operating under the supervision of its regional affiliate to gather the data. For each city a random sample of buildings was selected, and data were gathered. Responses for over 1000 buildings were obtained.

  17. Field Mapping At Walker-Lane Transitional Zone Region (Shevenell...

    Open Energy Info (EERE)

    Region (Shevenell, Et Al., 2008) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness...

  18. Field Mapping At Walker-Lane Transitional Zone Region (Blewitt...

    Open Energy Info (EERE)

    Zone Region (Blewitt Et Al, 2005) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness...

  19. Field Mapping At Central Nevada Seismic Zone Region (Blewitt...

    Open Energy Info (EERE)

    Region (Blewitt, Et Al., 2003) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness...

  20. Field Mapping At Central Nevada Seismic Zone Region (Shevenell...

    Open Energy Info (EERE)

    Shevenell, Et Al., 2008) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness could be...

  1. Building Interoperability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy FutureDepartment of Energy Building Energy-EfficientBuilding

  2. Building Interoperability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy FutureDepartment of Energy Building Energy-EfficientBuilding

  3. Building America Best Practices Series: Volume 7.1: Guide to Determining Climate Regions by County

    SciTech Connect (OSTI)

    Baechler, Michael C.; Williamson, Jennifer L.; Gilbride, Theresa L.; Cole, Pamala C.; Hefty, Marye G.; Love, Pat M.

    2010-08-30T23:59:59.000Z

    This report for DOE's Building America program helps builders identify which Building America climate region they are building in. The guide includes maps comparing the Building America regions with climate designations used in the International Energy Conservation Code for Residential Buildings and lists all U.S. counties by climate zone. A very brief history of the development of the Building America climate map and descriptions of each climate zone are provided. This report is available on the Building America website www.buildingamerica.gov.

  4. Reversible micromachining locator

    DOE Patents [OSTI]

    Salzer, L.J.; Foreman, L.R.

    1999-08-31T23:59:59.000Z

    This invention provides a device which includes a locator, a kinematic mount positioned on a conventional tooling machine, a part carrier disposed on the locator and a retainer ring. The locator has disposed therein a plurality of steel balls, placed in an equidistant position circumferentially around the locator. The kinematic mount includes a plurality of magnets which are in registry with the steel balls on the locator. In operation, a blank part to be machined is placed between a surface of a locator and the retainer ring (fitting within the part carrier). When the locator (with a blank part to be machined) is coupled to the kinematic mount, the part is thus exposed for the desired machining process. Because the locator is removably attachable to the kinematic mount, it can easily be removed from the mount, reversed, and reinserted onto the mount for additional machining. Further, the locator can likewise be removed from the mount and placed onto another tooling machine having a properly aligned kinematic mount. Because of the unique design and use of magnetic forces of the present invention, positioning errors of less than 0.25 micrometer for each machining process can be achieved. 7 figs.

  5. Reversible micromachining locator

    DOE Patents [OSTI]

    Salzer, Leander J. (Los Alamos, NM); Foreman, Larry R. (Los Alamos, NM)

    1999-01-01T23:59:59.000Z

    This invention provides a device which includes a locator, a kinematic mount positioned on a conventional tooling machine, a part carrier disposed on the locator and a retainer ring. The locator has disposed therein a plurality of steel balls, placed in an equidistant position circumferentially around the locator. The kinematic mount includes a plurality of magnets which are in registry with the steel balls on the locator. In operation, a blank part to be machined is placed between a surface of a locator and the retainer ring (fitting within the part carrier). When the locator (with a blank part to be machined) is coupled to the kinematic mount, the part is thus exposed for the desired machining process. Because the locator is removably attachable to the kinematic mount, it can easily be removed from the mount, reversed, and reinserted onto the mount for additional machining. Further, the locator can likewise be removed from the mount and placed onto another tooling machine having a properly aligned kinematic mount. Because of the unique design and use of magnetic forces of the present invention, positioning errors of less than 0.25 micrometer for each machining process can be achieved.

  6. Interoperability of Computer Aided Design and Energy Performance Simulation to Improve Building Energy Efficiency and Performance 

    E-Print Network [OSTI]

    Chaisuparasmikul, P.

    2006-01-01T23:59:59.000Z

    The paper describes very significant novel interoperability and data modeling technology for existing building that maps a building information parametric model with an energy simulation model, establishing a seamless link between Computer Aided...

  7. Reversible micromachining locator

    DOE Patents [OSTI]

    Salzer, Leander J. (Los Almos, NM); Foreman, Larry R. (late of Los Alamos, NM)

    2002-01-01T23:59:59.000Z

    A locator with a part support is used to hold a part onto the kinematic mount of a tooling machine so that the part can be held in or replaced in exactly the same position relative to the cutting tool for machining different surfaces of the part or for performing different machining operations on the same or different surfaces of the part. The locator has disposed therein a plurality of steel balls placed at equidistant positions around the planar surface of the locator and the kinematic mount has a plurality of magnets which alternate with grooves which accommodate the portions of the steel balls projecting from the locator. The part support holds the part to be machined securely in place in the locator. The locator can be easily detached from the kinematic mount, turned over, and replaced onto the same kinematic mount or another kinematic mount on another tooling machine without removing the part to be machined from the locator so that there is no need to touch or reposition the part within the locator, thereby assuring exact replication of the position of the part in relation to the cutting tool on the tooling machine for each machining operation on the part.

  8. Building Captains Location Last Name First Name Phone #

    E-Print Network [OSTI]

    Fraden, Seth

    Cummings Ann 63804 Heller Stramowski Terry 67594 Heller Alt Jacobs Claudia 63806 Heller Emmerich Valerie

  9. Building Technologies Office: DOE Zero Energy Ready Home Partner Locator

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO OverviewAttachments EnergyFebruary 29 - MarchCodesEnergy 3 Peer Review The

  10. Home | Better Buildings Workforce

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Better Buildings Logo EERE Home | Programs & Offices | Consumer Information Search form Search Search Better Buildings Logo Connect with Us LinkedIn Twitter Better Buildings...

  11. A Geographer's Role in a Google Maps World

    E-Print Network [OSTI]

    Bartley, Jeremy

    2007-11-14T23:59:59.000Z

    Map Viewer Desktop Explorer ArcGIS Server Mobile Enterprise Environment Open APIs • Mapping • 3-D Visualization • Modeling & Analysis • Data Management ArcGIS Server is Open & Interoperable Using Standards to Integrate with Any System Enhancements... to build applications that showcase content – Google Map API, Google Map Mapplet, MS Virtual Earth API • Easy to answer questions – Integrate data There is more though… As Geographers, we can learn a lot from these sites Geographers must also reach out...

  12. A DISTRIBUTED INTELLIGENT AUTOMATED DEMAND RESPONSE BUILDING MANAGEMENT SYSTEM

    SciTech Connect (OSTI)

    Auslander, David; Culler, David; Wright, Paul; Lu, Yan; Piette, Mary

    2013-12-30T23:59:59.000Z

    The goal of the 2.5 year Distributed Intelligent Automated Demand Response (DIADR) project was to reduce peak electricity load of Sutardja Dai Hall at UC Berkeley by 30% while maintaining a healthy, comfortable, and productive environment for the occupants. We sought to bring together both central and distributed control to provide “deep” demand response1 at the appliance level of the building as well as typical lighting and HVAC applications. This project brought together Siemens Corporate Research and Siemens Building Technology (the building has a Siemens Apogee Building Automation System (BAS)), Lawrence Berkeley National Laboratory (leveraging their Open Automated Demand Response (openADR), Auto-­Demand Response, and building modeling expertise), and UC Berkeley (related demand response research including distributed wireless control, and grid-­to-­building gateway development). Sutardja Dai Hall houses the Center for Information Technology Research in the Interest of Society (CITRIS), which fosters collaboration among industry and faculty and students of four UC campuses (Berkeley, Davis, Merced, and Santa Cruz). The 141,000 square foot building, occupied in 2009, includes typical office spaces and a nanofabrication laboratory. Heating is provided by a district heating system (steam from campus as a byproduct of the campus cogeneration plant); cooling is provided by one of two chillers: a more typical electric centrifugal compressor chiller designed for the cool months (Nov-­ March) and a steam absorption chiller for use in the warm months (April-­October). Lighting in the open office areas is provided by direct-­indirect luminaries with Building Management System-­based scheduling for open areas, and occupancy sensors for private office areas. For the purposes of this project, we focused on the office portion of the building. Annual energy consumption is approximately 8053 MWh; the office portion is estimated as 1924 MWh. The maximum peak load during the study period was 1175 kW. Several new tools facilitated this work, such as the Smart Energy Box, the distributed load controller or Energy Information Gateway, the web-­based DR controller (dubbed the Central Load-­Shed Coordinator or CLSC), and the Demand Response Capacity Assessment & Operation Assistance Tool (DRCAOT). In addition, an innovative data aggregator called sMAP (simple Measurement and Actuation Profile) allowed data from different sources collected in a compact form and facilitated detailed analysis of the building systems operation. A smart phone application (RAP or Rapid Audit Protocol) facilitated an inventory of the building’s plug loads. Carbon dioxide sensors located in conference rooms and classrooms allowed demand controlled ventilation. The extensive submetering and nimble access to this data provided great insight into the details of the building operation as well as quick diagnostics and analyses of tests. For example, students discovered a short-­cycling chiller, a stuck damper, and a leaking cooling coil in the first field tests. For our final field tests, we were able to see how each zone was affected by the DR strategies (e.g., the offices on the 7th floor grew very warm quickly) and fine-­tune the strategies accordingly.

  13. Building Energy Optimization Analysis Method (BEopt) - Building...

    Energy Savers [EERE]

    about BEopt. See an example of a Building America project that used BEopt. Find more case studies of Building America projects across the country that incorporate BEopt when...

  14. Better Buildings Neighborhood Program: BetterBuildings Lowell Final Report

    SciTech Connect (OSTI)

    Heslin, Thomas

    2014-01-31T23:59:59.000Z

    The City of Lowell set four goals at the beginning of the Better Buildings Neighborhood Program: 1. Improve the Downtown Historic Park District’s Carbon Footprint 2. Develop a sustainable and replicable model for energy efficiency in historic buildings 3. Create and retain jobs 4. Promote multi?stakeholder partnerships The City of Lowell, MA was awarded $5 million in May 2010 to conduct energy efficiency retrofits within the downtown National Historical Park (NHP). The City’s target was to complete retrofits in 200,000 square feet of commercial space and create 280 jobs, while adhering to the strict historical preservation regulations that govern the NHP. The development of a model for energy efficiency in historic buildings was successfully accomplished. BetterBuildings Lowell’s success in energy efficiency in historic buildings was due to the simplicity of the program. We relied strongly on the replacement of antiquated HVAC systems and air sealing and a handful of talented energy auditors and contractors. BetterBuildings Lowell was unique for the Better Buildings Neighborhood Program because it was the only program that focused solely on commercial properties. BetterBuildings Lowell did target multi?family properties, which were reported as commercial, but the majority of the building types and uses were commercial. Property types targeted were restaurants, office buildings, museums, sections of larger buildings, mixed use buildings, and multifamily buildings. This unique fabric of building type and use allows for a deeper understanding to how different properties use energy. Because of the National Historical Park designation of downtown Lowell, being able to implement energy efficiency projects within a highly regulated historical district also provided valuable research and precedent proving energy efficiency projects can be successfully completed in historical districts and historical buildings. Our program was very successful in working with the local Historic Board, which has jurisdiction in the NHP. The Historic Board was cooperative with any exterior renovations as long as they were not changing the existing aesthetics of the property. If we were replacing a rooftop condenser it needed to be placed where the existing rooftop condenser was located. Receiving proper approval from the Historic Board for any external energy conservation measures was known by all the participating contractors. One area of the retrofits that was contentious regarded venting of the new HVAC equipment. Installing external stacks was not allowed so the contractors had to negotiate with the Historic Board regarding the proper way to vent the equipment that met the needs mechanically and aesthetically. Overall BetterBuildings Lowell was successful at implementing energy and cost saving measures into 31 commercial properties located within the NHP. The 31 retrofits had 1,554,768 square feet of commercial and multifamily housing and a total predicted energy savings exceeding 22,869 a year. Overall the City of Lowell achieved its target goals and is satisfied with the accomplishments of the BetterBuildings program. The City will continue to pursue energy efficient programs and projects.

  15. Uranium Lease Tracts Location Map | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group current C3EDepartment of Energy Office ofStephanieMaterial2008

  16. File:VallesLocationMap.pdf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to:ar-80m.pdf JumpUsgs.9.2010.Fig01.pdf JumpUtilityROW.pdf

  17. Locating Heat Recovery Opportunities 

    E-Print Network [OSTI]

    Waterland, A. F.

    1981-01-01T23:59:59.000Z

    Basic concepts of heat recovery are defined as they apply to the industrial community. Methods for locating, ranking, and developing heat recovery opportunities are presented and explained. The needs for useful heat 'sinks' are emphasized as equal...

  18. Locating Heat Recovery Opportunities

    E-Print Network [OSTI]

    Waterland, A. F.

    1981-01-01T23:59:59.000Z

    Basic concepts of heat recovery are defined as they apply to the industrial community. Methods for locating, ranking, and developing heat recovery opportunities are presented and explained. The needs for useful heat 'sinks' are emphasized as equal...

  19. Commissioning-Oriented Building Loads Calculations. Application to the CA-MET Building in Namur (Belgium)

    E-Print Network [OSTI]

    Adam, C.; Andre, P.; Aparecida Silva, C.; Hannay, J.; Lebrun, J.

    2004-01-01T23:59:59.000Z

    ) for the particular case of an office building located in Namur (Belgium), which is the object of an intensive re-commissioning activity for several years. Very global methods are used as well as detailed computer simulations using TRNSYS Multizone building types 46...

  20. Industrial Buildings

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Building FloorspaceThousandWithdrawals0.0 0.0Decade4Year114,937

  1. Mnemonic SOMs: Recognizable Shapes for Self-Organizing Maps

    E-Print Network [OSTI]

    Rauber,Andreas

    and having a regular grid structure, but in non-rectangular map shapes, is introduced. Utilizing different the specific area on the map reverting to the technical notation of nodes and grid #12;WSOM 2005, Paris or hexagonal grid locations; not covering a complete rectangular grid, they would have map shapes following

  2. 3Building a Business Building a Business

    E-Print Network [OSTI]

    Arnold, Jonathan

    15 3Building a Business Building a Business This section provides direction on the kinds. If you contemplate building a "garage- based" company to sell a product into a niche market, you should-ups conjure up images of future wealth, of building the next Amgen or Microsoft, of launching what will become

  3. Mapping the News: How Journalists use GIS

    E-Print Network [OSTI]

    Herzog, David

    2006-11-15T23:59:59.000Z

    : 2006 elections In the news: 2000 elections In the news: Hurricane Katrina In the news: Other stories A short history? Miami, 1992 Hurricane Andrew hits south Fla. Miami Herald #0;{ What caused the damage patterns to south Florida homes... hit by Hurricane Andrew? Analysis by surveying section Mapped wind contour The story #0;{ Newer homes suffered most #0;{ Construction outpaced building inspections #0;{ Shoddy building practices Just one decade later . . . Journalism slow...

  4. Heat storage and distribution inside passive-solar buildings

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1983-05-01T23:59:59.000Z

    Passive solar buildings are investigated from the viewpoint of the storage of solar heat in materials of the building: walls, floors, ceilings, and furniture. The effects of the location, material, thickness, and orientation of each internal building surface are investigated. The concept of diurnal heat capacity is introduced and a method of using this parameter to estimate clear-day temperature swings is developed. Convective coupling to remote rooms within a building is discussed. Design guidelines are given.

  5. Impacts of Regional Electricity Prices and Building Type on the Economics of Commercial Photovoltaic Systems

    SciTech Connect (OSTI)

    Ong, S.; Campbell, C.; Clark, N.

    2012-12-01T23:59:59.000Z

    To identify the impacts of regional electricity prices and building type on the economics of solar photovoltaic (PV) systems, 207 rate structures across 77 locations and 16 commercial building types were evaluated. Results for expected solar value are reported for each location and building type. Aggregated results are also reported, showing general trends across various impact categories.

  6. Fast Flux Test Facility Asbestos Location Tracking Program

    SciTech Connect (OSTI)

    REYNOLDS, J.A.

    1999-04-13T23:59:59.000Z

    Procedure Number HNF-PRO-408, revision 0, paragraph 1.0, ''Purpose,'' and paragraph 2.0, ''Requirements for Facility Management of Asbestos,'' relate building inspection and requirements for documentation of existing asbestos-containing building material (ACBM) per each building assessment. This documentation shall be available to all personnel (including contractor personnel) entering the facility at their request. Corrective action was required by 400 Area Integrated Annual Appraisal/Audit for Fiscal Year 1992 (IAA-92-0007) to provide this notification documentation. No formal method had been developed to communicate the location and nature of ACBM to maintenance personnel in the Fast Flux Test Facility (FFTF) 400 Area. The scope of this Data Package Document is to locate and evaluate any ACBM found at FFTF which constitutes a baseline. This includes all buildings within the protected area. These findings are compiled from earlier reports, numerous work packages and engineering evaluations of employee findings.

  7. YMCA Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    in Texas. (Nay 1971) Eddy Joe Williams, B S ~ , Texas A&M University; Directed by: Dr. Donald E. Farris Costs and returns were budgeted for selected cattle feeding systems in four areas of Texas for both a 1500 and a 20, 000 head capacity feedlot... on feed, a wide variety of systems with different rates of gain and conversion ratios were selected, The ob]ectives of the study were to determine (1) the competitive advantage of feeding cattle in each area, (2) the optimum location of each cattle...

  8. Energy and Buildings 42 (2010) 16371646 Contents lists available at ScienceDirect

    E-Print Network [OSTI]

    Fung, Benjamin C. M.

    2010-01-01T23:59:59.000Z

    Energy and Buildings 42 (2010) 1637­1646 Contents lists available at ScienceDirect Energy and Buildings journal homepage: www.elsevier.com/locate/enbuild A decision tree method for building energy o Article history: Received 18 March 2010 Accepted 19 April 2010 Keywords: Building energy

  9. Building Technologies Residential Survey

    SciTech Connect (OSTI)

    Secrest, Thomas J.

    2005-11-07T23:59:59.000Z

    Introduction A telephone survey of 1,025 residential occupants was administered in late October for the Building Technologies Program (BT) to gather information on residential occupant attitudes, behaviors, knowledge, and perceptions. The next section, Survey Results, provides an overview of the responses, with major implications and caveats. Additional information is provided in three appendices as follows: - Appendix A -- Summary Response: Provides summary tabular data for the 13 questions that, with subparts, comprise a total of 25 questions. - Appendix B -- Benchmark Data: Provides a benchmark by six categories to the 2001 Residential Energy Consumption Survey administered by EIA. These were ownership, heating fuel, geographic location, race, household size and income. - Appendix C -- Background on Survey Method: Provides the reader with an understanding of the survey process and interpretation of the results.

  10. Building America Webinar: Saving Energy in Multifamily Buildings...

    Energy Savers [EERE]

    More Documents & Publications Building America Webinar: Retrofit Ventilation Strategies in Multifamily Buildings Webinar Energy Saver Guide Building America...

  11. Determining position inside building via laser rangefinder and handheld computer

    DOE Patents [OSTI]

    Ramsey, Jr. James L. (Albuquerque, NM); Finley, Patrick (Albuquerque, NM); Melton, Brad (Albuquerque, NM)

    2010-01-12T23:59:59.000Z

    An apparatus, computer software, and a method of determining position inside a building comprising selecting on a PDA at least two walls of a room in a digitized map of a building or a portion of a building, pointing and firing a laser rangefinder at corresponding physical walls, transmitting collected range information to the PDA, and computing on the PDA a position of the laser rangefinder within the room.

  12. and Pollutant Safeguarding Buildings

    E-Print Network [OSTI]

    commercial buildings, these flows are driven primarily by the building's ventilation system, but natural2004 Airflow and Pollutant Transport Group Safeguarding Buildings Against Chemical and Biological research since 1998 to protect buildings and building occupants from threats posed by airborne chemical

  13. Patent Overlay Mapping: Visualizing Technological Distance

    E-Print Network [OSTI]

    Kay, Luciano; Youtie, Jan; Porter, Alan L; Rafols, Ismael

    2012-01-01T23:59:59.000Z

    The purpose of this paper is to present a new global patent map that represents all technological categories, and a method to locate patent data of individual organizations and technological fields on the global map. This second patent overlay map technique is shown to be of potential interest to support competitive intelligence and policy decision-making. The global patent map is based on similarities in citing-to-cited relationships between categories of the International Patent Classification (IPC) of European Patent Office (EPO) patents from 2000 to 2006. This patent dataset, extracted from PatStat database, represents more than 760,000 patent records in more than 400 IPC categories. To illustrate the kind of analytical support offered by this approach, the paper shows the overlay of nanotechnology-related patenting activities of two companies and two different nanotechnology subfields on to the global patent map. The exercise shows the potential of patent overlay maps to visualize technological areas and...

  14. Building America Webinar: Building America Research Tools | Department...

    Energy Savers [EERE]

    Building America Research Tools Building America Webinar: Building America Research Tools This webinar was held on March 18, 2015, and reviewed Building America research tools,...

  15. Building America Top Innovations Hall of Fame Profile - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) Building America Top Innovations Hall of Fame Profile - Building Energy...

  16. Site Map

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebookScholarship Fund3 Outlook forSDPPP Individual Permit:Site Map TUNL

  17. Site Map

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclearHomelandMultivariateSite Map Main Menu About the ALS ALS@20

  18. Map ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy Manufacturing Energy andYou areID 90 Map

  19. Electric current locator

    DOE Patents [OSTI]

    King, Paul E. (Corvallis, OR); Woodside, Charles Rigel (Corvallis, OR)

    2012-02-07T23:59:59.000Z

    The disclosure herein provides an apparatus for location of a quantity of current vectors in an electrical device, where the current vector has a known direction and a known relative magnitude to an input current supplied to the electrical device. Mathematical constants used in Biot-Savart superposition equations are determined for the electrical device, the orientation of the apparatus, and relative magnitude of the current vector and the input current, and the apparatus utilizes magnetic field sensors oriented to a sensing plane to provide current vector location based on the solution of the Biot-Savart superposition equations. Description of required orientations between the apparatus and the electrical device are disclosed and various methods of determining the mathematical constants are presented.

  20. Optimal fault location

    E-Print Network [OSTI]

    Knezev, Maja

    2009-05-15T23:59:59.000Z

    are triggered. Protection system consisting of protection relays and circuit breakers (CBs) will operate in order to de-energize faulted line. Different Intelligent Electronic Devices (IEDs) located in substations for the purpose of monitoring... in the control center by an operator who will mark fault event in a spreadsheet and inform other staff responsible for dealing with fault analysis and repair such as protection group or maintenance respectively. Protective relaying staff will be ready...

  1. Optimal fault location

    E-Print Network [OSTI]

    Knezev, Maja

    2008-10-10T23:59:59.000Z

    are triggered. Protection system consisting of protection relays and circuit breakers (CBs) will operate in order to de-energize faulted line. Different Intelligent Electronic Devices (IEDs) located in substations for the purpose of monitoring... in the control center by an operator who will mark fault event in a spreadsheet and inform other staff responsible for dealing with fault analysis and repair such as protection group or maintenance respectively. Protective relaying staff will be ready...

  2. Alternative Fueling Station Locator

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageStation LocationsGeneseeValleyPerformance

  3. Alternative Fueling Station Locator

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageStation LocationsGeneseeValleyPerformance

  4. Evaluation of a case-based Reasoning Energy Prediction Tool for Commercial Buildings 

    E-Print Network [OSTI]

    Monfet, D.; Arkhipova, E.; Choiniere, D.

    2013-01-01T23:59:59.000Z

    This paper presents the results of an energy predictor that predicts the energy demand of commercial buildings using Case Based Reasoning (CBR). The proposed approach is evaluated using monitored data in a real office building located in Varennes...

  5. Final Exam Location and Time

    E-Print Network [OSTI]

    Final Exam Location and Time. Math 162 Fall 2001. Date: Wednesday December 12, 2001. Time: 7:00 pm -9:00 pm. Location: Lambert Fieldhouse ...

  6. Final Exam Location and Time

    E-Print Network [OSTI]

    Final Exam Location and Time. Math 161 Fall 2001. Date: Friday December 14, 2001. Time: 8:00 am -10:00 am. Location: Lambert Fieldhouse ...

  7. Building America

    SciTech Connect (OSTI)

    Brad Oberg

    2010-12-31T23:59:59.000Z

    Builders generally use a 'spec and purchase' business management system (BMS) when implementing energy efficiency. A BMS is the overall operational and organizational systems and strategies that a builder uses to set up and run its company. This type of BMS treats building performance as a simple technology swap (e.g. a tank water heater to a tankless water heater) and typically compartmentalizes energy efficiency within one or two groups in the organization (e.g. purchasing and construction). While certain tools, such as details, checklists, and scopes of work, can assist builders in managing the quality of the construction of higher performance homes, they do nothing to address the underlying operational strategies and issues related to change management that builders face when they make high performance homes a core part of their mission. To achieve the systems integration necessary for attaining 40% + levels of energy efficiency, while capturing the cost tradeoffs, builders must use a 'systems approach' BMS, rather than a 'spec and purchase' BMS. The following attributes are inherent in a systems approach BMS; they are also generally seen in quality management systems (QMS), such as the National Housing Quality Certification program: Cultural and corporate alignment, Clear intent for quality and performance, Increased collaboration across internal and external teams, Better communication practices and systems, Disciplined approach to quality control, Measurement and verification of performance, Continuous feedback and improvement, and Whole house integrated design and specification.

  8. APS Building Monitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Monitors For non-401 Building Monitors, select: LOMs Other APS Buildings 401 West WCtr Lab Wing ECtr East 5th Floor Yiying Ge na na na na 4th Floor Rick Fenner Karen...

  9. Building Performance Simulation

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    a future with  very low energy buildings resulting in very consumption  of  low  energy  buildings,  with  site  EUI design and operation of low energy buildings through better 

  10. Thick Buildings [Standards

    E-Print Network [OSTI]

    Coffin, Christie Johnson

    1995-01-01T23:59:59.000Z

    on Occupant Behavior in Buildings, New Directions forSacramento, is a thin building that surrounds an atrium. (Performance of a Green Building," Urban UndQune 1992): 23-

  11. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    United States and China, Energy and Buildings, 2013. Underin Singapore. Energy and Buildings, 37, 167-174. Eom, J. ,building operations. Energy and Buildings, 33, 783–791.

  12. BUILDING PROCTOR rev. April 2014

    E-Print Network [OSTI]

    BUILDING PROCTOR MANUAL rev. April 2014 #12;Building Proctor Manual rev. April 2014 2 TABLE.........................................................................................................................................5 Role of a Building Proctor ..............................................................................................................5 Authority of Building Proctor

  13. Eastern Energy Zones Mapping Tool

    Broader source: Energy.gov [DOE]

    The Eastern Interconnection States’ Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states and other stakeholders in the Eastern Interconnection identify geographic areas suitable for the development of clean energy resources (natural gas, sequestration or utilitization locations for C02 from coal, nuclear, and renewable) which can potentially provide significant amounts of new electric power generation.

  14. Build a Zinc Finger Read the enclosed Molecule of the Month Article.

    E-Print Network [OSTI]

    Ohta, Shigemi

    of the protein based off enclosed sequence map. YOU SHOULD NOT LABEL EVERY AMINO ACID. Label the start and stop of every helix, sheet and the location of every turn on your map. In addition you should label each amino

  15. Wireless Sensor Technology to Optimize the Occupant's Dynamic Demand Pattern Within the Building 

    E-Print Network [OSTI]

    Zeiler, W.; Boxem, G.; Maaijen, R.

    2012-01-01T23:59:59.000Z

    is to look how the individual building occupants? movements, their staying on different locations within their building. Distributed information can be obtained by low-cost wireless sensor networks (Arens et al. 2005, Tse and Chan 2008), low-cost infrared..., could only be achieved if users could be located within the building. Low-budget wireless sensor networks with portable nodes show high potential for real-time localization and monitoring of building occupants ( Feldmeier and Paradiso 2010). Therefore...

  16. The numerical reproduction of chaotic maps using radial basis function interpolants

    E-Print Network [OSTI]

    Bakich, Michael Peter

    1992-01-01T23:59:59.000Z

    of Reproducing Chaotic Maps. Criteria Used in the Evaluation of Tiling Methods. . . . . . Numerical Methods. . The Location and Configuration of Strange Attractors. . . . . CASE STUDIES OF CHAOTIC SYSTEMS The Henon Map. . The Ikeda Map. . Duffing... of the x-surface and the y-surface of the Pitch Attitude Control map. . 12 5 Weighted average method restructured to take into account edge effects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . 17 6 3...

  17. The numerical reproduction of chaotic maps using radial basis function interpolants 

    E-Print Network [OSTI]

    Bakich, Michael Peter

    1992-01-01T23:59:59.000Z

    of Reproducing Chaotic Maps. Criteria Used in the Evaluation of Tiling Methods. . . . . . Numerical Methods. . The Location and Configuration of Strange Attractors. . . . . CASE STUDIES OF CHAOTIC SYSTEMS The Henon Map. . The Ikeda Map. . Duffing... of the x-surface and the y-surface of the Pitch Attitude Control map. . 12 5 Weighted average method restructured to take into account edge effects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . 17 6 3...

  18. Buildings Interoperability Landscape ? DRAFT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Heating, Refrigerating, and Air-Conditioning Engineers BACS building automation and control system BCHP building-cooling-heating-power BPM Business Process Modeling BTO...

  19. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01T23:59:59.000Z

    Folsom CA, Integration of Renewable Resources: OperationalOffice of Energy Efficiency and Renewable Energy, BuildingOffice of Energy Efficiency and Renewable Energy, Building

  20. Office Buildings - Full Report

    Gasoline and Diesel Fuel Update (EIA)

    1). Table 1. Totals and means of of floorspace, number of workers, and hours of operation for office buildings, 2003 Buildings (thousand) Total Floorspace (million sq. ft.)...

  1. Sandia National Laboratories: Locations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear PressLaboratorySoftware100LifeAnnouncementsLocations

  2. A new report delivers MSHP performance data for use in whole-building simulation tools.

    E-Print Network [OSTI]

    A new report delivers MSHP performance data for use in whole-building simulation tools. Mini performance maps for use in whole-building simulation tools. Most public information on MSHP performance building simulation MSHP models. In the laboratory tests, researchers found that both MSHPs achieved

  3. Solar buildings. Overview: The Solar Buildings Program

    SciTech Connect (OSTI)

    Not Available

    1998-04-01T23:59:59.000Z

    Buildings account for more than one third of the energy used in the United States each year, consuming vast amounts of electricity, natural gas, and fuel oil. Given this level of consumption, the buildings sector is rife with opportunity for alternative energy technologies. The US Department of Energy`s Solar Buildings Program was established to take advantage of this opportunity. The Solar Buildings Program is engaged in research, development, and deployment on solar thermal technologies, which use solar energy to produce heat. The Program focuses on technologies that have the potential to produce economically competitive energy for the buildings sector.

  4. Benchmarking Buildings to Prioritize Sites for Emissions Analysis

    Broader source: Energy.gov [DOE]

    When actual energy use by building type is known, benchmarking the performance of those buildings to industry averages can help establish those with greatest opportunities for GHG reduction. Energy intensity can be used as a basis for benchmarking by building type and can be calculated using actual energy use, representative buildings, or available average estimates from agency energy records. Energy intensity should be compared to industry averages, such as the Commercial Buildings Energy Consumption Survey (CBECS) or an agency specific metered sample by location.

  5. Geologic Maps Geology 200

    E-Print Network [OSTI]

    Kammer, Thomas

    Geologic Maps Geology 200 Geology for Environmental Scientists #12;Geologic Map of the US #12;Symbols found on geologic maps #12;Horizontal Strata #12;Geologic map of part of the Grand Canyon. Each color represents a different formation. #12;Inclined Strata #12;Dome #12;Geologic map of the Black Hills

  6. Maps of Selected State Subdivisions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Crude Oil, Natural Gas, and Natural Gas Liquids Proved Reserves Summary Maps of Selected State Subdivisions Map 1: Alaska Map 2: California Map 3: Louisiana Map 4: New Mexico Map...

  7. Emergency Response Plan for the Fred Kaiser and Macleod Buildings

    E-Print Network [OSTI]

    Pulfrey, David L.

    with Disabilities - Locations ..............................................10 6 Responsibilities In the Case of Hazardous Material Releases, Spills, Explosions or Fires..27 Building Occupants - Instructions................................................................27 9.1 Explosion or Fire due to Hazardous Materials .........................................27 9

  8. A Look at Health Care Buildings - Index Page

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    Health Care Home: A Look at CBECS Building Activities How large are they? How many employees are there? Where are they located? How old are they? Who owns and occupies them? Are...

  9. Better Buildings Neighborhood Program

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy Better Buildings Neighborhood Program: Business Models Guide, October 27, 2011.

  10. NIST Preliminary Reconnaissance, Building

    E-Print Network [OSTI]

    Magee, Joseph W.

    NIST Preliminary Reconnaissance, Building Performance and Emergency Communications, Joplin)): Support R&D to improve building codes and standards and practices for design and construction of buildings of and data collection on the impact of severe wind on buildings, structures, and infrastructure ­ Section 204

  11. RESEARCH BUILDING AT NORTHWESTERN

    E-Print Network [OSTI]

    Engman, David M.

    BIOMEDICAL RESEARCH BUILDING AT NORTHWESTERN MEDICINE #12;"Our new Biomedical Research Building-intensive medical schools. Perkins+Will has designed a building that will be superbly functional and have great a magnificent 12-story Biomedical Research Building to address this priority. The new 600,000 square foot

  12. BUILDING MANAGEMENT & RESTRICTED ACCESS

    E-Print Network [OSTI]

    Johnston, Daniel

    BUILDING MANAGEMENT & RESTRICTED ACCESS Plan Annex 2014 VIII #12;#12;#12;The University of Texas at Austiniv #12;Building Management & Restricted Access Plan Annex v CONTENTS RECORD OF CHANGES .......................................................................................................15 J. BUILDING SECURITY OPERATIONS RESTRICTED ACCESS PROCEDURES FOR BUILDINGS ON ELECTRONIC ACCESS

  13. FOREST CENTRE STORAGE BUILDING

    E-Print Network [OSTI]

    deYoung, Brad

    FOREST CENTRE STORAGE BUILDING 3 4 5 6 7 8 UniversityDr. 2 1 G r e n f e l l D r i v e MULTI PURPOSE COURT STUDENT RESIDENCES GREEN HOUSE STUDENT RESIDENCES STUDENT RESIDENCES RECPLEX STORAGE BUILDING STORAGE BUILDING LIBRARY & COMPUTING FINE ARTS FOREST CENTRE ARTS &SCIENCE BUILDING ARTS &SCIENCE

  14. Community Development Building Division

    E-Print Network [OSTI]

    California Energy Commission 1516 Ninth Street Sacramento, Ca 95814-5514 Re: Green Building Ordinance of Los Altos Energy Efficiency Ordinance, Green Building Regulations under the 2005 California Building by the Board on that date. The Green Building Regulation, Chapter 12.66 of the City Municipal code, will ensure

  15. Unified Convolutional/Turbo Decoder Architecture Design Based on Triple-Mode MAP/VA Kernel

    E-Print Network [OSTI]

    Hung, Shih-Hao

    Unified Convolutional/Turbo Decoder Architecture Design Based on Triple-Mode MAP/VA Kernel Fan convolutional/ turbo decoder design. According to the triple-mode MAP/VA timing chart and by merging some similar modules in both the Viterbi decoder and the log-MAP turbo code decoder, we build one unified

  16. Geothermal: Site Map

    Office of Scientific and Technical Information (OSTI)

    Site Map Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us HomeBasic Search About Publications Advanced Search New Hot Docs News Related Links Site Map...

  17. Thermal Performance of Building Envelope in Very Hot Dry Desert Region in Egypt (Toshky)

    E-Print Network [OSTI]

    Khalil, M. H.; Sheble, S. S.; Helal, M. A.; El-Demirdash, M.

    2010-01-01T23:59:59.000Z

    Thermal Performance of Building Envelope in Very Hot Dry Desert Region in Egypt (Toshky Region) S.S. Sheble* M. H. Khalil M. A. Helal Prof. M. El- Demirdash3 Asso. Prof. Building Physics Institute (HBRC) Asso. Prof. Building Physics... Institute (HBRC) Prof. & head of Building Physics Institute (HBRC) Prof. & Chairman of HBRC Housing & Building National Research Center (HBRC) Cairo, Egypt * Author ABSTRACT Toshky region is a desert region located in the south east...

  18. Density equalizing map projections: A new algorithm

    SciTech Connect (OSTI)

    Merrill, D.W.; Selvin, S.; Mohr, M.S.

    1992-02-01T23:59:59.000Z

    In the study of geographic disease clusters, an alternative to traditional methods based on rates is to analyze case locations on a transformed map in which population density is everywhere equal. Although the analyst`s task is thereby simplified, the specification of the density equalizing map projection (DEMP) itself is not simple and continues to be the subject of considerable research. Here a new DEMP algorithm is described, which avoids some of the difficulties of earlier approaches. The new algorithm (a) avoids illegal overlapping of transformed polygons; (b) finds the unique solution that minimizes map distortion; (c) provides constant magnification over each map polygon; (d) defines a continuous transformation over the entire map domain; (e) defines an inverse transformation; (f) can accept optional constraints such as fixed boundaries; and (g) can use commercially supported minimization software. Work is continuing to improve computing efficiency and improve the algorithm.

  19. Density equalizing map projections: A new algorithm

    SciTech Connect (OSTI)

    Merrill, D.W.; Selvin, S.; Mohr, M.S.

    1992-02-01T23:59:59.000Z

    In the study of geographic disease clusters, an alternative to traditional methods based on rates is to analyze case locations on a transformed map in which population density is everywhere equal. Although the analyst's task is thereby simplified, the specification of the density equalizing map projection (DEMP) itself is not simple and continues to be the subject of considerable research. Here a new DEMP algorithm is described, which avoids some of the difficulties of earlier approaches. The new algorithm (a) avoids illegal overlapping of transformed polygons; (b) finds the unique solution that minimizes map distortion; (c) provides constant magnification over each map polygon; (d) defines a continuous transformation over the entire map domain; (e) defines an inverse transformation; (f) can accept optional constraints such as fixed boundaries; and (g) can use commercially supported minimization software. Work is continuing to improve computing efficiency and improve the algorithm.

  20. Leadership Curriculum Map

    Broader source: Energy.gov [DOE]

    Leadership qualifications define the competencies needed to build a federal corporate culture that drives for results, serves customers, and builds successful teams and coalitions within and...

  1. Directions and Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Directions & Maps Plan Your Visit Visit About the Museum Museum Hours Directions & Maps When to Visit Arrange for a Visit Around Los Alamos Contact Us invisible utility element...

  2. Sensitivity of Forced Air Distribution System Efficiency to Climate, Duct Location, Air Leakage and Insulation

    E-Print Network [OSTI]

    , Air Leakage and Insulation Iain S. Walker Energy Performance of Buildings Group Indoor Environment ................................................................................................................................................ 4 Duct Insulation, Location and Leakage Examples............................................................... 4 Figure 2. Sheet metal ducts in a basement insulated with asbestos

  3. House Simulation Protocols (Building America Benchmark) - Building...

    Energy Savers [EERE]

    House Simulation Protocols. See an example of this Top Innovation in action. Find more case studies of Building America projects across the country that utilize House Simulation...

  4. Building Green in Greensburg: Business Incubator Building

    Office of Energy Efficiency and Renewable Energy (EERE)

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing SunChips Business Incubator building in Greensburg, Kansas.

  5. Building Green in Greensburg: City Hall Building

    Office of Energy Efficiency and Renewable Energy (EERE)

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing City Hall building in Greensburg, Kansas.

  6. The Cricket indoor location system

    E-Print Network [OSTI]

    Priyantha, Nissanka Bodhi, 1968-

    2005-01-01T23:59:59.000Z

    Indoor environments present opportunities for a rich set of location-aware applications such as navigation tools for humans and robots, interactive virtual games, resource discovery, asset tracking, location-aware sensor ...

  7. Microsoft Word - Location of Events_CF15-USE.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Los A lamos N ational L aboratory Postdoc C areer F air 2 015 Location of Events (Maps with driving instructions) Tuesday, A ugust 2 5th 9:00am - 4 :00pm Company I nformation S...

  8. Placing Flickr Photos on a Map Pavel Serdyukov

    E-Print Network [OSTI]

    Tian, Qi

    - tos uploaded to Flickr on the World map. As primary input for our methods we use the textual, the majority of Flickr users do not own location-aware cameras. Thus a large proportion of pho- tos uploaded

  9. Joseph Vance Building, The

    High Performance Buildings Database

    Seattle, WA In 2006, the Rose Smart Growth Investment Fund acquired the historic Joseph Vance Building with the purpose of transforming it into "the leading green and historic class B" building in the marketplace. The terra cotta Vance Building was constructed in 1929 and has 14 floors - 13 floors of offices over ground-floor retail with a basement for mechanical equipment and storage. In 2009 the U.S. Green Building Council (USGBC) awarded the Vance Building LEED for Existing Buildings (EB) Gold certification.

  10. Building America Top Innovations Hall of Fame Profile - Building...

    Energy Savers [EERE]

    Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top Innovations Hall of Fame...

  11. Trends in Commercial Buildings--Buildings and Floorspace

    U.S. Energy Information Administration (EIA) Indexed Site

    Home > Trends in Commercial Buildings > Trends in Buildings Floorspace Data tables Commercial Buildings TrendDetail Commercial Floorspace TrendDetail Background: Adjustment to...

  12. Building operating systems services: An architecture for programmable buildings.

    E-Print Network [OSTI]

    Dawson-Haggerty, Stephen

    2014-01-01T23:59:59.000Z

    7.3.2 Building Performance Analysis . . . . . . 7.4 RelatedWork 2.1 Building Physical Design . . . . . . . . . .3.2.6 Building Applications . . . . . . . . . . .

  13. Career Map: Instrumentation Coordinator

    Broader source: Energy.gov [DOE]

    The Wind Program's Career Map provides job description information for Instrumentation Coordinator positions.

  14. Pitfalls of digital maps

    SciTech Connect (OSTI)

    Brewer, B.B.

    1986-05-01T23:59:59.000Z

    Computers allow us to combine maps from different sources and different scales more easily. In the past, these variations had to be ignored or only partly solved. With the advent of computers and increased digital maps, these inconsistencies become glaring errors that should no longer be ignored. The final success of a project largely lies on the accuracy and validity of its maps. This paper discusses problems and solutions associated with trying to tie maps together. The paper concentrates on the importance of understanding map projections and the problems involved in adding new maps to existing digital maps.

  15. NATL Grid Map 50-Meter Grid

    E-Print Network [OSTI]

    Slatton, Clint

    NATL-east NATL Grid Map 50-Meter Grid Locations in NATL can be specified by reference to a grid intervals. Each gridline intersection ("grid point") is identified by its two gridlines (e.g., E5). Each 50x50-m block formed by the gridlines is identified by the grid point in its northwest corner (e

  16. Building Energy Code

    Broader source: Energy.gov [DOE]

    ''Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  17. Building, landscape and section

    E-Print Network [OSTI]

    Johnson, Daniel B. (Daniel Bryant)

    1992-01-01T23:59:59.000Z

    All buildings have in their section a relationship to the landscape on which they are sited. Therefore we as inhabitants of these buildings may or may not have a relationship with the landscape. It is the supposition of ...

  18. Special Building Renovations

    Broader source: Energy.gov [DOE]

    A number of building types have specific energy uses and needs, and as such the renewable opportunities may be different from a typical office building. This section briefly discusses the following...

  19. Model Building Energy Code

    Broader source: Energy.gov [DOE]

    ''Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  20. APS Building Managers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Managers BUILDING CONTACT 400,401,402,411,412,413,415,420,431-436,438 Steven Downey 450 Glenn Kailus 382 Joe Gagliano 378 Ed Theres 314 Ed Russell...

  1. Building Energy Code

    Broader source: Energy.gov [DOE]

    Note: Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  2. Building Energy Code

    Broader source: Energy.gov [DOE]

    ''Note: Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For...

  3. Financing green buildings

    E-Print Network [OSTI]

    Pierce, Christopher John, S.M. Massachusetts Institute of Technology

    2013-01-01T23:59:59.000Z

    An emerging trend in real estate is the development of sustainable buildings, partially due to the huge environmental impact of the design, construction and operation of commercial buildings. This thesis provides a brief ...

  4. Building Energy Code

    Broader source: Energy.gov [DOE]

    In 2009 S.B. 1182 created the Oklahoma Uniform Building Code Commission. The 11-member Commission was given the power to conduct rulemaking processes to adopt new building codes. The codes adopted...

  5. Building Energy Code

    Broader source: Energy.gov [DOE]

    Prior to 1997, South Carolina's local governments adopted and enforced the building codes. In 1997, the law required statewide use of the most up-to-date building codes, which then required the...

  6. Building condition monitoring

    E-Print Network [OSTI]

    Samouhos, Stephen V. (Stephen Vincent), 1982-

    2010-01-01T23:59:59.000Z

    The building sector of the United States currently consumes over 40% of the United States primary energy supply. Estimates suggest that between 5 and 30% of any building's annual energy consumption is unknowingly wasted ...

  7. Change in historic buildings

    E-Print Network [OSTI]

    Yin, Chien-Ni

    1992-01-01T23:59:59.000Z

    Change in historic buildings is inevitable. If these changes are not well-managed, the cityscape will be threatened because a city is composed of buildings. A good city should combine both growth and preservation. Controlling ...

  8. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01T23:59:59.000Z

    I Figure 21. Sample building energy use label expressed inanalyses of actual buildings energy consumption data confirm1983. PROGRESS IN ENERGY EFFICIENT BUILDINGS Leonard W. Wall

  9. The Economics of Green Building

    E-Print Network [OSTI]

    Eichholtz, Piet; Kok, Nils; Quigley, John M.

    2010-01-01T23:59:59.000Z

    Benjamin. "Do LEED-Certified Buildings Save Energy? Yes,But,." Energy and Buildings, 2009, 41, pp. 897-905. Royalrating, and publicizing buildings along these dimensions (

  10. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    Center for Building Energy Efficiency, and the China Center on Building Energy Efficiency (CERC-BEE) November,1)  CERC  Building  Energy  Efficiency  (CERC?BEE) 

  11. The Economics of Green Building

    E-Print Network [OSTI]

    Eichholtz, Piet; Kok, Nils; Quigley, John M.

    2010-01-01T23:59:59.000Z

    Environment Quality in Green Buildings: A Review," Nationalof Popular Attention to Green Building Notes: Sources:2007 - 2009 panel of green buildings and nearby control

  12. Building Operator Certification

    E-Print Network [OSTI]

    Lilley, D.

    2013-01-01T23:59:59.000Z

    Building Operator Certification Energy Efficiency through Operator Training CATEE December 18, 2013 – San Antonio, TX Dennis Lilley, CEM, PMP ESL-KT-13-12-49 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16...-18 Building Operator Certification Energy Efficiency through Operator Training What is Building Operator Certification? Industry-recognized credential in energy efficient building operation practices Created with 100 industry experts Launched in 1996 9...

  13. Building Songs 5

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-10-28T23:59:59.000Z

    . Sman shad building song 5.WAV Length of track 00:02:14 Related tracks (include description/relationship if appropriate) Title of track Building Songs 5 Translation of title Description (to be used in archive entry) Skar ma chos mdzin... sings a building song. Such songs are traditionally sung antiphonally between two groups of men while they are ramming walls. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma...

  14. Building Songs 8

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-10-28T23:59:59.000Z

    . Sman shad building song 8.WAV Length of track 00:01:28 Related tracks (include description/relationship if appropriate) Title of track Building Songs 8 Translation of title Description (to be used in archive entry) Skar ma chos mdzin... sings a building song. Such songs are traditionally sung antiphonally between two groups of men while they are ramming walls. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma...

  15. Building Songs 7

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-10-28T23:59:59.000Z

    . Sman shad building song 7.WAV Length of track 00:09:57 Related tracks (include description/relationship if appropriate) Title of track Building Songs 7 Translation of title Description (to be used in archive entry) Skar ma chos mdzin... sings a building song. Such songs are traditionally sung antiphonally between two groups of men while they are ramming walls. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma...

  16. Building Performance Evaluation

    E-Print Network [OSTI]

    King, A.; Harris, J.; Mbentin, B.

    2012-01-01T23:59:59.000Z

    Building Performance Evaluation Anne King and Jo Harris, MBEKTN and BSRIA Agenda ? Background to funding and programme ? The Building Performance Evaluation Programme in the UK ? Requirements ? Results ? Impact ? Discussion ? Do you/ How do... you do Building Performance Evaluation? ? What gaps are there and what could research do to fill them? Background ? The Technology Strategy Board ? the funders ? Low Impact Building programme ? BSRIA and others ? evaluators ? Soft Landings...

  17. Kiowa County Commons Building

    Office of Energy Efficiency and Renewable Energy (EERE)

    This poster describes the energy efficiency features and sustainable materials used in the Kiowa County Commons Building in Greensburg, Kansas.

  18. Executive report Building knowledge

    E-Print Network [OSTI]

    Geffner, Hector

    Executive report Building knowledge To build citizens To build cities UPF CAMPUS ICŔRIA INTERNATIONAL PROJECT 2010 International Campus of Excellence Programme #12;2 UPF CAMPUS ICŔRIA INTERNATIONAL this presentation from the one submitted in the CEI 2009 programme where UPF was classified as a `promising

  19. Energy and Buildings 81 (2014) 371380 Contents lists available at ScienceDirect

    E-Print Network [OSTI]

    Kusiak, Andrew

    2014-01-01T23:59:59.000Z

    Energy and Buildings 81 (2014) 371­380 Contents lists available at ScienceDirect Energy buildings. Improved HVAC control may reduce its energy consumption without additional costs. The supervisory and Buildings journal homepage: www.elsevier.com/locate/enbuild Performance optimization of HVAC systems

  20. 42 UNIVERSITY OF CALIFORNIA -CAPITAL FINANCIAL PLAN 2012-22 Coastal Biology Building

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    42 UNIVERSITY OF CALIFORNIA - CAPITAL FINANCIAL PLAN 2012-22 Coastal Biology Building University&Figures SANTA CRUZ Coastal Biology Building Site #12;43UNIVERSITY OF CALIFORNIA - CAPITAL FINANCIAL PLAN 2012 C ­ multiple locations Coastal Biology Building - (Marine Science Campus) Infrastructure

  1. Building America Webinar: Building America: Research for Real...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Webinar: Building America: Research for Real-World Results Building America Webinar: Building America: Research for Real-World Results December 17, 2014 3:00PM to...

  2. SINGLE-FACED GRAYQB{trademark} - A RADIATION MAPPING DEVICE

    SciTech Connect (OSTI)

    Mayer, J.; Farfan, E.; Immel, D.; Phillips, M.; Bobbitt, J.; Plummer, J.

    2013-12-12T23:59:59.000Z

    GrayQb{trademark} is a novel technology that has the potential to characterize radioactively contaminated areas such as hot cells, gloveboxes, small and large rooms, hallways, and waste tanks. The goal of GrayQb{trademark} is to speed the process of decontaminating these areas, which reduces worker exposures and promotes ALARA considerations. The device employs Phosphorous Storage Plate (PSP) technology as its primary detector material. PSPs, commonly used for medical applications and non-destructive testing, can be read using a commercially available scanner. The goal of GrayQb{trademark} technology is to locate, quantify, and identify the sources of contamination. The purpose of the work documented in this report was to better characterize the performance of GrayQb{trademark} in its ability to present overlay images of the PSP image and the associated visual image of the location being surveyed. The results presented in this report are overlay images identifying the location of hot spots in both controlled and field environments. The GrayQb{trademark} technology has been mainly tested in a controlled environment with known distances and source characteristics such as specific known radionuclides, dose rates, and strength. The original concept for the GrayQb{trademark} device involved utilizing the six faces of a cube configuration and was designed to be positioned in the center of a contaminated area for 3D mapping. A smaller single-faced GrayQb{trademark}, dubbed GrayQb SF, was designed for the purpose of conducting the characterization testing documented in this report. This lighter 2D version is ideal for applications where entry ports are too small for a deployment of the original GrayQb™ version or where only a single surface is of interest. The shape, size, and weight of these two designs have been carefully modeled to account for most limitations encountered in hot cells, gloveboxes, and contaminated areas. GrayQb{trademark} and GrayQb{trademark} SF share the same fundamental detection system design (e.g., pinhole and PSPs). Therefore, performance tests completed on the single face GrayQB in this report is also applicable to the six- faced GrayQB (e.g., ambient light sensitivity and PSP response). This report details the characterization of the GrayQb{trademark} SF in both an uncontrolled environment; specifically, the Savannah River Site (SRS) Plutonium Fuel Form Facility in Building 235-F (Metallurgical Building) and controlled testing at SRS’s Health Physics Instrument Calibration Facility and SRS’s R&D Engineering Imaging and Radiation Systems Building. In this report, the resulting images from the Calibration Facility were obtained by overlaying the PSP and visual images manually using ImageJ. The resulting images from the Building 235-F tests presented in this report were produced using ImageJ and applying response trends developed from controlled testing results. The GrayQb{trademark} technology has been developed in two main stages at Savannah River National Laboratory (SRNL): 1) the GrayQb{trademark} development was supported by SRNL’s Laboratory Directed Research and Development Program and 2) the GrayQb{trademark} SF development and its testing in Building 235-F were supported by the Office of Deactivation and Decommissioning and Facility Engineering (EM-13), U.S. Department of Energy – Office of Environmental Management.

  3. Heat storage and distribution inside passive-solar buildings

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1983-01-01T23:59:59.000Z

    Passive-solar buildings are investigated from the viewpoint of the storage of solar heat in materials of the building: walls, floors, ceilings, and furniture. The effects of the location, material, thickness, and orientation of each internal building surface are investigated. The concept of diurnal heat capacity is introduced and a method of using this parameter to estimate clear-day temperature swings is developed. Convective coupling to remote rooms within a building is discussed, including both convection through single doorways and convective loops that may exist involving a sunspace. Design guidelines are given.

  4. Jackson Park Hospital Green Building Medical Center

    SciTech Connect (OSTI)

    William Dorsey; Nelson Vasquez

    2010-03-31T23:59:59.000Z

    Jackson Park Hospital completed the construction of a new Medical Office Building on its campus this spring. The new building construction has adopted the City of Chicago's recent focus on protecting the environment, and conserving energy and resources, with the introduction of green building codes. Located in a poor, inner city neighborhood on the South side of Chicago, Jackson Park Hospital has chosen green building strategies to help make the area a better place to live and work. The new green building houses the hospital's Family Medicine Residency Program and Specialty Medical Offices. The residency program has been vital in attracting new, young physicians to this medically underserved area. The new outpatient center will also help to allure needed medical providers to the community. The facility also has areas designated to women's health and community education. The Community Education Conference Room will provide learning opportunities to area residents. Emphasis will be placed on conserving resources and protecting our environment, as well as providing information on healthcare access and preventive medicine. The new Medical Office Building was constructed with numerous energy saving features. The exterior cladding of the building is an innovative, locally-manufactured precast concrete panel system with integral insulation that achieves an R-value in excess of building code requirements. The roof is a 'green roof' covered by native plantings, lessening the impact solar heat gain on the building, and reducing air conditioning requirements. The windows are low-E, tinted, and insulated to reduce cooling requirements in summer and heating requirements in winter. The main entrance has an air lock to prevent unconditioned air from entering the building and impacting interior air temperatures. Since much of the traffic in and out of the office building comes from the adjacent Jackson Park Hospital, a pedestrian bridge connects the two buildings, further decreasing the amount of unconditioned air that enters the office building. The HVAC system has an Energy Efficiency Rating 29% greater than required. No CFC based refrigerants were used in the HVAC system, thus reducing the emission of compounds that contribute to ozone depletion and global warming. In addition, interior light fixtures employ the latest energy-efficient lamp and ballast technology. Interior lighting throughout the building is operated by sensors that will automatically turn off lights inside a room when the room is unoccupied. The electrical traction elevators use less energy than typical elevators, and they are made of 95% recycled material. Further, locally manufactured products were used throughout, minimizing the amount of energy required to construct this building. The primary objective was to construct a 30,000 square foot medical office building on the Jackson Park Hospital campus that would comply with newly adopted City of Chicago green building codes focusing on protecting the environment and conserving energy and resources. The energy saving systems demonstrate a state of the-art whole-building approach to energy efficient design and construction. The energy efficiency and green aspects of the building contribute to the community by emphasizing the environmental and economic benefits of conserving resources. The building highlights the integration of Chicago's new green building codes into a poor, inner city neighborhood project and it is designed to attract medical providers and physicians to a medically underserved area.

  5. Scalable Energy Efficient Location Aware Multicast Protocol for MANET (SEELAMP)

    E-Print Network [OSTI]

    Kamboj, Pariza

    2010-01-01T23:59:59.000Z

    Multicast plays an important role in implementing the group communications in bandwidth scarce multihop mobile ad hoc networks. However, due to the dynamic topology of MANETs it is very difficult to build optimal multicast trees and maintaining group membership, making even more challenging to implement scalable and robust multicast in Mobile Ad hoc Networks (MANET). A scalable and energy efficient location aware multicast algorithm, called SEELAMP, for mobile ad hoc networks is presented in the paper that is based on creation of shared tree using the physical location of the nodes for the multicast sessions. It constructs a shared bi-directional multicast tree for its routing operations rather than a mesh, which helps in achieving more efficient multicast delivery. The algorithm uses the concept of small overlapped zones around each node for proactive topology maintenance with in the zone. Protocol depends on the location information obtained using a distributed location service, which effectively reduces th...

  6. Passive solar buildings

    SciTech Connect (OSTI)

    Balcomb, J.D. [ed.] [Solar Energy Research Inst., Golden, CO (United States)

    1992-10-01T23:59:59.000Z

    Developments in passive solar buildings that took place from the early 1970`s through 1989 are described. Much of the work covered was federally sponsored during the period 1975 through 1986. About half the volume is devoted to quantitative methods for modeling, simulation, and design analysis of passive buildings; the other half summarizes the quantitative results of testing and monitoring of models and buildings. The following are covered: building solar gain modeling, simulation analysis, simplified methods, materials and components, analytical results for specific systems, test modules, building integration, performance monitoring and results, and design tools. (MHR)

  7. Passive solar buildings

    SciTech Connect (OSTI)

    Balcomb, J.D. (ed.) (Solar Energy Research Inst., Golden, CO (United States))

    1992-01-01T23:59:59.000Z

    Developments in passive solar buildings that took place from the early 1970's through 1989 are described. Much of the work covered was federally sponsored during the period 1975 through 1986. About half the volume is devoted to quantitative methods for modeling, simulation, and design analysis of passive buildings; the other half summarizes the quantitative results of testing and monitoring of models and buildings. The following are covered: building solar gain modeling, simulation analysis, simplified methods, materials and components, analytical results for specific systems, test modules, building integration, performance monitoring and results, and design tools. (MHR)

  8. Equilibrium thermal characteristics of a building integrated photovoltaic tiled roof

    SciTech Connect (OSTI)

    Mei, L.; Gottschalg, R.; Loveday, D.L. [Centre for Renewable Energy Systems Technology (CREST), Department of Electronic and Electrical Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU (United Kingdom); Infield, D.G. [Institute of Energy and Environment, Department of Electronic and Electrical Engineering, University of Strathclyde, Glasgow, G1 1XW (United Kingdom); Davies, D.; Berry, M. [Solarcentury, 91-94 Lower Marsh Waterloo, London, SE1 7AB (United Kingdom)

    2009-10-15T23:59:59.000Z

    Photovoltaic (PV) modules attain high temperatures when exposed to a combination of high radiation levels and elevated ambient temperatures. The temperature rise can be particularly problematic for fully building integrated PV (BIPV) roof tile systems if back ventilation is restricted. PV laminates could suffer yield degradation and accelerated aging in these conditions. This paper presents a laboratory based experimental investigation undertaken to determine the potential for high temperature operation in such a BIPV installation. This is achieved by ascertaining the dependence of the PV roof tile temperature on incident radiation and ambient temperature. A theory based correction was developed to account for the unrealistic sky temperature of the solar simulator used in the experiments. The particular PV roof tiles used are warranted up to an operational temperature of 85 C, anything above this temperature will void the warranty because of potential damage to the integrity of the encapsulation. As a guide for installers, a map of southern Europe has been generated indicating locations where excessive module temperatures might be expected and thus where installation is inadvisable. (author)

  9. INSERT YOUR BUILDING NAME HERE: BUILDING EMERGENCY PLAN

    E-Print Network [OSTI]

    INSERT YOUR BUILDING NAME HERE: BUILDING EMERGENCY PLAN Date Adopted: 6/4/13 Date Revised: 6/4/13 Prepared By: Tracey Simmerman #12;PURDUE UNIVERSITY BUILDING EMERGENCY PLAN VERSION 3 2 Table of Contents Suspension or Campus Closure SECTION 3: BUILDING INFORMATION 3.1 Building Deputy/Alternate Building Deputy

  10. Buildings and Areas 1001 Broadway Building D1 BDWY

    E-Print Network [OSTI]

    Carter, John

    Design (LEED) Green Building Rating System is a nationally accepted benchmark for the designBuildings and Areas 1001 Broadway Building D1 BDWY 1313 East Columbia Building B3 CLMB Administration Building D1 ADMN Admissions & C2 ADAL Alumni Building Archbishop Murphy A1 ATMA Apartments Arrupe

  11. Embedded Commissioning for Building Design

    E-Print Network [OSTI]

    Akin, O.; Turkaslan-Bulbul, M. T.; Gursel, I.; Garrett, J. H.; Akinci, B.; Wang, H.

    2004-01-01T23:59:59.000Z

    Building Commissioning has a broad scope that extends to all phases of building delivery. We view commissioning as a building delivery embedded process that persistently verifies and validates design intent throughout the building lifecycle process...

  12. Commercial Buildings Characteristics, 1992

    SciTech Connect (OSTI)

    Not Available

    1994-04-29T23:59:59.000Z

    Commercial Buildings Characteristics 1992 presents statistics about the number, type, and size of commercial buildings in the United States as well as their energy-related characteristics. These data are collected in the Commercial Buildings Energy Consumption Survey (CBECS), a national survey of buildings in the commercial sector. The 1992 CBECS is the fifth in a series conducted since 1979 by the Energy Information Administration. Approximately 6,600 commercial buildings were surveyed, representing the characteristics and energy consumption of 4.8 million commercial buildings and 67.9 billion square feet of commercial floorspace nationwide. Overall, the amount of commercial floorspace in the United States increased an average of 2.4 percent annually between 1989 and 1992, while the number of commercial buildings increased an average of 2.0 percent annually.

  13. A Simple Swap Technique and Enhanced GTT Location Database Management Kuo-Hsing Chiang Nirmala Shenoy

    E-Print Network [OSTI]

    Shenoy, Nirmala

    implemented in the current mobile networks are ETSI GSM MAP [1] and EIA/TIA IS-41 [2]. The two- level databaseA Simple Swap Technique and Enhanced GTT Location Database Management Scheme Kuo-Hsing Chiang and provides comparison results with other location database management schemes. The performance results

  14. Also Known As (Room or Building)

    E-Print Network [OSTI]

    Mottram, Nigel

    Room No. Also Known As (Room or Building) Hearing Assistance Type 702 InfraRed 704 InfraRed 706 Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam Smith Building Adam

  15. Geologic Map and GIS Data for the Patua Geothermal Area

    SciTech Connect (OSTI)

    Faulds, James E.

    2011-10-31T23:59:59.000Z

    Patua—ESRI Geodatabase (ArcGeology v1.3): - Contains all the geologic map data, including faults, contacts, folds, veins, dikes, unit polygons, and attitudes of strata and faults. - List of stratigraphic units. - Locations of geothermal wells. - Locations of 40Ar/39Ar and tephra samples.

  16. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    platforms and  building automation systems (BAS), a building  automation  control,  fault  detection  and  diagnostics  (FDD),  and  continuous  system 

  17. Mobile Alternative Fueling Station Locator

    SciTech Connect (OSTI)

    Not Available

    2009-04-01T23:59:59.000Z

    The Department of Energy's Alternative Fueling Station Locator is available on-the-go via cell phones, BlackBerrys, or other personal handheld devices. The mobile locator allows users to find the five closest biodiesel, electricity, E85, hydrogen, natural gas, and propane fueling sites using Google technology.

  18. Precision zero-home locator

    DOE Patents [OSTI]

    Stone, W.J.

    1983-10-31T23:59:59.000Z

    A zero-home locator includes a fixed phototransistor switch and a moveable actuator including two symmetrical, opposed wedges, each wedge defining a point at which switching occurs. The zero-home location is the average of the positions of the points defined by the wedges.

  19. Modeling study of deposition locations in the 291-Z plenum

    SciTech Connect (OSTI)

    Mahoney, L.A.; Glissmeyer, J.A.

    1994-06-01T23:59:59.000Z

    The TEMPEST (Trent and Eyler 1991) and PART5 computer codes were used to predict the probable locations of particle deposition in the suction-side plenum of the 291-Z building in the 200 Area of the Hanford Site, the exhaust fan building for the 234-5Z, 236-Z, and 232-Z buildings in the 200 Area of the Hanford Site. The Tempest code provided velocity fields for the airflow through the plenum. These velocity fields were then used with TEMPEST to provide modeling of near-floor particle concentrations without particle sticking (100% resuspension). The same velocity fields were also used with PART5 to provide modeling of particle deposition with sticking (0% resuspension). Some of the parameters whose importance was tested were particle size, point of injection and exhaust fan configuration.

  20. Introgression & mapping Fiber cell

    E-Print Network [OSTI]

    Germplasm Introgression Genomics & mapping Fiber cell initiation Radiation hybrid (RH) mapping and breeding. Research activities commonly include plant breeding, genetics, genomics, cytogenetics, molecular methods. (C, S) · Contribute uniquely to genomics and its relevance to genetic improvement (C,S) · Harness

  1. Towards building a Crowd-Sourced Sky Map Dustin Lang

    E-Print Network [OSTI]

    Kaski, Samuel

    of the Chelyabinsk meteoroid from security- camera and other footage (Zuluaga et al., 2013). An interesting new

  2. U.S. Climate Zones Map for Commercial Buildings

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto17 34 44Year Jan Feb Mar Apr May Jun602 1,397 125 QL1.Past Climate

  3. U.S. Climate Zones Map for Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are nowTotal" (Percent) Type: Sulfur Content API GravityDakota" "Fuel, quality",Area: U.S. East Coast (PADD 1) New England (PADD 1A) ConnecticutProduct:2009U.S.

  4. Technology Mapping of the Renewable Energy, Buildings and Transport

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with formSoutheastern ILSunseekerTallahatchie ValleyInnovation &

  5. United States Green Building Council (MAPS) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlin BaxinUmwelt Management AG UMaAG JumpEuropeUnitedUnitedLSC Jump

  6. NREL: Energy Efficiency Potential Mapping (Analysis & Tools for Building

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in Many Devils Wash,Energy NREL Job TaskWelcome Remarks

  7. SERC Grants Interactive Map

    Broader source: Energy.gov [DOE]

    View SERC Grants in a larger map. To report corrections, please email SustainableEnergyWAP@ee.doe.gov.

  8. National Hydropower Map

    Broader source: Energy.gov [DOE]

    High-resolution map produced by Oak Ridge National Laboratory showing hydropower resources throughout the United States.

  9. WIPP Projects Interative Map

    Broader source: Energy.gov [DOE]

    View WIPP Projects in a larger map. To report corrections, please email WeatherizationInnovation@ee.doe.gov.

  10. Establishing Benchmarks for DOE Commercial Building R&D and Program Evaluation: Preprint

    SciTech Connect (OSTI)

    Deru, M.; Griffith, B.; Torcellini, P.

    2006-06-01T23:59:59.000Z

    The U.S. Department of Energy (DOE) Building Technologies Program and the DOE research laboratories conduct a great deal of research on building technologies. However, differences in models and simulation tools used by various research groups make it difficult to compare results among studies. The authors have developed a set of 22 hypothetical benchmark buildings and weighting factors for nine locations across the country, for a total of 198 buildings.

  11. BUILDING EMERGENCY ACTION PLAN [Medical Sciences Building, Building # 192] / [506 S. Mathews, Urbana

    E-Print Network [OSTI]

    Gilbert, Matthew

    BUILDING EMERGENCY ACTION PLAN [Medical Sciences Building, Building # 192] / [506 S. Mathews requires the BUILDING EMERGENCY MANAGEMENT TEAM: Building Command Post1 1. M2 classroom, Carle Forum This Building Emergency Action Plan (BEAP) is to be used in conjunction with the Emergency Response Guide (ERG

  12. High-performance commercial building facades

    SciTech Connect (OSTI)

    Lee, Eleanor; Selkowitz, Stephen; Bazjanac, Vladimir; Inkarojrit, Vorapat; Kohler, Christian

    2002-06-01T23:59:59.000Z

    This study focuses on advanced building facades that use daylighting, sun control, ventilation systems, and dynamic systems. A quick perusal of the leading architectural magazines, or a discussion in most architectural firms today will eventually lead to mention of some of the innovative new buildings that are being constructed with all-glass facades. Most of these buildings are appearing in Europe, although interestingly U.S. A/E firms often have a leading role in their design. This ''emerging technology'' of heavily glazed fagades is often associated with buildings whose design goals include energy efficiency, sustainability, and a ''green'' image. While there are a number of new books on the subject with impressive photos and drawings, there is little critical examination of the actual performance of such buildings, and a generally poor understanding as to whether they achieve their performance goals, or even what those goals might be. Even if the building ''works'' it is often dangerous to take a design solution from one climate and location and transport it to a new one without a good causal understanding of how the systems work. In addition, there is a wide range of existing and emerging glazing and fenestration technologies in use in these buildings, many of which break new ground with respect to innovative structural use of glass. It is unclear as to how well many of these designs would work as currently formulated in California locations dominated by intense sunlight and seismic events. Finally, the costs of these systems are higher than normal facades, but claims of energy and productivity savings are used to justify some of them. Once again these claims, while plausible, are largely unsupported. There have been major advances in glazing and facade technology over the past 30 years and we expect to see continued innovation and product development. It is critical in this process to be able to understand which performance goals are being met by current technology and design solutions, and which ones need further development and refinement. The primary goal of this study is to clarify the state-of-the-art of the performance of advanced building facades so that California building owners and designers can make informed decisions as to the value of these building concepts in meeting design goals for energy efficiency, ventilation, productivity and sustainability.

  13. Quantitative DNA fiber mapping

    DOE Patents [OSTI]

    Gray, Joe W. (San Francisco, CA); Weier, Heinz-Ulrich G. (Oakland, CA)

    1998-01-01T23:59:59.000Z

    The present invention relates generally to the DNA mapping and sequencing technologies. In particular, the present invention provides enhanced methods and compositions for the physical mapping and positional cloning of genomic DNA. The present invention also provides a useful analytical technique to directly map cloned DNA sequences onto individual stretched DNA molecules.

  14. Quantitive DNA Fiber Mapping

    E-Print Network [OSTI]

    Lu, Chun-Mei

    2009-01-01T23:59:59.000Z

    of California. Lu et al. : DNA Fiber Mapping page - 35 Lu etal. : DNA Fiber Mapping page - 36 a b c d e f g OV P1 cloneSp6 end T7 end Lu et al. : DNA Fiber Mapping page - 37 a b c

  15. Physical mapping of complex genomes

    DOE Patents [OSTI]

    Evans, G.A.

    1993-06-15T23:59:59.000Z

    A method for the simultaneous identification of overlapping cosmid clones among multiple cosmid clones and the use of the method for mapping complex genomes are provided. A library of cosmid clones that contains the DNA to be mapped is constructed and arranged in a manner such that individual clones can be identified and replicas of the arranged clones prepared. In preferred embodiments, the clones are arranged in a two dimensional matrix. In such embodiments, the cosmid clones in a row are pooled, mixed probes complementary to the ends of the DNA inserts in the pooled clones are synthesized, hybridized to a first replica of the library. Hybridizing clones, which include the pooled row, are identified. A second portion of clones is prepared by pooling cosmid clones that correspond to a column in the matrix. The second pool thereby includes one clone from the first portion pooled clones. This common clone is located on the replica at the intersection of the column and row. Mixed probes complementary to the ends of the DNA inserts in the second pooled portion of clones are prepared and hybridized to a second replica of the library. The hybridization pattern on the first and second replicas of the library are compared and cross-hybridizing clones, other than the clones in the pooled column and row, that hybridize to identical clones in the first and second replicas are identified. These clones necessarily include DNA inserts that overlap with the DNA insert in the common clone located at the intersection of the pooled row and pooled column. The DNA in the entire library may be mapped by pooling the clones in each of the rows and columns of the matrix, preparing mixed end-specific probes and hybridizing the probes from each row or column to a replica of the library. Since all clones in the library are located at the intersection of a column and a row, the overlapping clones for all clones in the library may be identified and a physical map constructed.

  16. Physical mapping of complex genomes

    DOE Patents [OSTI]

    Evans, Glen A. (Encinitas, CA)

    1993-01-01T23:59:59.000Z

    Method for simultaneous identification of overlapping cosmid clones among multiple cosmid clones and the use of the method for mapping complex genomes are provided. A library of cosmid clones that contains the DNA to be mapped is constructed and arranged in a manner such that individual clones can be identified and replicas of the arranged clones prepared. In preferred embodiments, the clones are arranged in a two dimensional matrix. In such embodiments, the cosmid clones in a row are pooled, mixed probes complementary to the ends of the DNA inserts int he pooled clones are synthesized, hybridized to a first replica of the library. Hybridizing clones, which include the pooled row, are identified. A second portion of clones is prepared by pooling cosmid clones that correspond to a column in the matrix. The second pool thereby includes one clone from the first portion pooled clones. This common clone is located on the replica at the intersection of the column and row. Mixed probes complementary to the ends of the DNA inserts in the second pooled portion of clones are prepared and hybridized to a second replica of the library. The hybridization pattern on the first and second replicas of the library are compared and cross-hybridizing clones, other than the clones in the pooled column and row, that hybridize to identical clones in the first and second replicas are identified. These clones necessarily include DNA inserts that overlap with the DNA insert int he common clone located at the intersection of the pooled row and pooled column. The DNA in the entire library may be mapped by pooling the clones in each of the rows and columns of the matrix, preparing mixed end-specific probes and hybridizing the probes from each row or column to a replica of the library. Since all clones in the library are located at the intersection of a column and a row, the overlapping clones for all clones in the library may be identified and a physical map constructed. In other preferred embodiments, the cosmid clones are arranged in a three dimensional matrix, pooled and compared in threes according to intersecting planes of the three dimensional matrix. Arrangements corresponding to geometries of higher dimensions may also be prepared and used to simultaneously identify overlapping clones in highly complex libraries with relatively few hybridization reactions.

  17. Oak Ridge D and D Plan 3515 Project - Technology Review (2007) and GammaCam Technology Demonstration for Characterizing Building 3515 at Oak Ridge (2007)

    SciTech Connect (OSTI)

    Byrne-Kelly, D.; Hart, A.; Brown, Ch.; Jordan, D. [MSE Technology Applications, Inc., Montana (United States); Phillips, E. [U.S. Department of Energy, Oak Ridge Operations Office, Oak Ridge, Tennessee (United States)

    2008-07-01T23:59:59.000Z

    This paper presents the results from the Characterization, Decontamination and Decommissioning (CD and D) Study performed by MSE Technology Application, Inc. (MSE) to assist the U.S. Department of Energy (DOE) and Oak Ridge National Laboratory (ORNL) in the preparation of a Project Execution Plan and Remediation Plan for Building 3515 at ORNL. Primary objectives of this study were to identify innovative CD and D technologies and methodologies and recommend alternatives applicable to the CD and D of Building 3515. Building 3515 is a small heavily shielded concrete and cement block structure centrally located in the Bethel Valley portion of the ORNL. The building's interior is extensively contaminated with Cesium 137 (Cs-137), the primary contaminant of concern. A previous attempt to characterize the building was limited to general interior area radiation exposure level measurements and a few surface smears gathered by inserting monitoring equipment into the building on long poles. Consequently, the spatial distribution of the gamma radiation source inside the building was not determined. A subsequent plan for D and D of the building presented a high risk of worker radiation dose in excess of as low as reasonably achievable (ALARA) because the source of the interior gamma radiation field is not completely understood and conventional practices required workers to be in close proximity of the building. As part of an initial literature search, MSE reviewed new generation gamma source characterization technologies and identified the GammaCam{sup TM} portable gamma ray imaging system as an innovative technology applicable to locating the dominant gamma ray sources within the building. The GammaCam{sup TM} gamma-ray imaging system is a commercially available technology marketed by the EDO Corporation. This system consists of a sensor head with a co-aligned camera and a portable computer. The system is designed to provide two-dimensional spatial mappings of gamma ray emitting nuclides in real time. The gamma radiation sensor and camera can be set up within or outside of the radiation field while the system operator and PC can be located 30 to 60 m (100 to 200 ft) from the sensor head. The system has been used successfully at numerous DOE and commercial nuclear facilities to precisely locate gamma radiation sources. However, literature attesting to the ability of this technology to detect radiation sources within heavily shielded structures was not available. Consequently, MSE was not certain if this technology would be capable of locating gamma ray sources within the heavily shielded Building 3515. To overcome this uncertainty, MSE sent two individuals to the EDO Corporation for training. At completion of the training, MSE leased the GammaCam{sup TM} portable system and brought it to ORNL to evaluate the capability of the system. An overview from this evaluation is summarized in this paper. (authors)

  18. Survey and Analysis of Weather Data for Building Energy Simulations

    SciTech Connect (OSTI)

    Bhandari, Mahabir S [ORNL; Shrestha, Som S [ORNL; New, Joshua Ryan [ORNL

    2012-01-01T23:59:59.000Z

    In recent years, calibrated energy modeling of residential and commercial buildings has gained importance in a retrofit-dominated market. Accurate weather data plays an important role in this calibration process and projected energy savings. It would be ideal to measure weather data at the building location to capture relevant microclimate variation but this is generally considered cost-prohibitive. There are data sources publicly available with high temporal sampling rates but at relatively poor geospatial sampling locations. To overcome this limitation, there are a growing number of service providers that claim to provide real time and historical weather data for 20-35 km2 grid across the globe. Unfortunately, there is limited documentation from 3rd-party sources attesting to the accuracy of this data. This paper compares provided weather characteristics with data collected from a weather station inaccessible to the service providers. Monthly average dry bulb temperature; relative humidity; direct, diffuse and horizontal solar radiation; and wind speed are statistically compared. Moreover, we ascertain the relative contributions of each weather variable and its impact on building loads. Annual simulations are calculated for three different building types, including a closely monitored and automated energy efficient research building. The comparison shows that the difference for an individual variable can be as high as 90%. In addition, annual building energy consumption can vary by 7% while monthly building loads can vary by 40% as a function of the provided location s weather data.

  19. Efficient FISH mapping with small cDNA probe and its application in comparative mapping

    SciTech Connect (OSTI)

    Heng, H.H.Q.; Shi, X.M.; Tsui, L.C. [Univ. of Toronto, Ontario (Canada)

    1994-09-01T23:59:59.000Z

    Gene mapping for fluorescence in situ hybridization (FISH) is generally difficult for small probes, especially cDNA probes. Yet, different cDNA projects have generated large number of clones that can be useful in generating physical and transcription maps and as candidate genes in studying human genetic diseases. To develop an efficient FISH method for mapping small cDNA probes (generally around a few hundred bp in size), we have investigated different hybridization conditions, methods of probe preparation as well as slide preparation. Our results suggest that the efficiency of FISH mapping with cDNA probes is critically dependent on the probe labeling and concentration, the temperature of hybridization and washing, and the concentration of formamide present in the solution. These conditions may be optimized systematically. The use of probe self-ligation to increase {open_quotes}network{close_quotes} formation was another useful signal amplification method. So far, we have been able to determine precise chromosome location for 90% of the cDNA probes (45/50). The sizes of the successfully mapped clones were between 200 bp and 2.5 kb. One important extension of our study has been our ability to map cDNA probes from heterologous species. Nine cDNA clones (390 bp to 3 kb) from mouse, rat, rabbit, chicken, frog and fish were successfully mapped to specific regions of banded human chromosomes. The latter application should greatly facilitate comparative gene mapping and study of genome evolution through identification of syntenic groups.

  20. The Lovejoy Building

    High Performance Buildings Database

    Portland, OR Originally built in 1910 as the stables for the Marshall-Wells Hardware Company, the Lovejoy Building is the home of Opsis Architects. The owner/architects purchased and renovated the historic building to house their growing business and to provide ground-floor office lease space and second-floor offices for their firm. Opsis wanted to use the building to experience and demonstrate the technologies and practices it promotes with clients.

  1. Building Songs 10

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-11-06T23:59:59.000Z

    . Sman shad building song 10.WAV Length of track 00:06:03 Related tracks (include description/relationship if appropriate) Title of track Building Songs 10 Translation of title Description (to be used in archive entry) Male villagers... sing a building song. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma Date of recording November 6th 2009. Place of recording Gad dmar khug market Mda' ma Township, Sde dge...

  2. What is Building America?

    SciTech Connect (OSTI)

    None

    2013-06-20T23:59:59.000Z

    DOE's Building America program is helping to bridge the gap between homes with high energy costs and homes that are healthy, durable, and energy efficient.

  3. Building Songs 11

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-11-06T23:59:59.000Z

    . Sman shad building song 11.WAV Length of track 00:21:12 Related tracks (include description/relationship if appropriate) Title of track Building Songs 11 Translation of title Description (to be used in archive entry) Male villagers... sing a building song. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma Date of recording November 6th 2009. Place of recording Gad dmar khug market Mda' ma Township, Sde dge...

  4. ORISE: Capacity Building

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capacity Building Because public health agencies must maintain the resources to respond to public health challenges, critical situations and emergencies, the Oak Ridge Institute...

  5. What is Building America?

    ScienceCinema (OSTI)

    None

    2013-07-22T23:59:59.000Z

    DOE's Building America program is helping to bridge the gap between homes with high energy costs and homes that are healthy, durable, and energy efficient.

  6. Building Science- Ventilation

    Broader source: Energy.gov [DOE]

    This presentation was given at the Summer 2012 DOE Building America meeting on July 25, 2012, and addressed the question Ť"What are the best ventilation techniques"

  7. High Performance Sustainable Buildings

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to achieve Leadership in Energy and Environmental Design gold certification from the U.S. Green Building Council. The Center for Integrated Nanotechnologies brings together...

  8. Forest Road Building Regulations

    Broader source: Energy.gov [DOE]

    The Wisconsin Department of Natural Resources has regulations for building a forest road, if development requires one. Regulations include zoning ordinances and permits for stream crossing, grading...

  9. building.ppt

    E-Print Network [OSTI]

    Building Parenting Skills and Interactions with Kangaroo Care. Sharon A. Wilkerson, PhD, RN. Associate Professor of Nursing. Purdue University. West Lafayette ...

  10. Whole Building Energy Simulation

    Broader source: Energy.gov [DOE]

    Whole building energy simulation, also referred to as energy modeling, can and should be incorporated early during project planning to provide energy impact feedback for which design considerations...

  11. Building bridges for fish

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building-bridges-for-fish Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects & Initiatives...

  12. Connector device for building integrated photovoltaic device

    SciTech Connect (OSTI)

    Keenihan, James R.; Langmaid, Joseph A.; Eurich, Gerald K.; Lesniak, Michael J.; Mazor, Michael H.; Cleereman, Robert J.; Gaston, Ryan S.

    2014-06-03T23:59:59.000Z

    The present invention is premised upon a connector device and method that can more easily electrically connect a plurality of PV devices or photovoltaic system components and/or locate these devices/components upon a building structure. It also may optionally provide some additional sub-components (e.g. at least one bypass diode and/or an indicator means) and may enhance the serviceability of the device.

  13. Bonneville Power Ampere Annex Z-995 Building

    High Performance Buildings Database

    Vancouver, WA The Bonneville Power Administration (BPA), a federal agency headquartered in Portland, Oregon, provides about half of the electricity used in the Pacific Northwest and operates more than three-fourths of the region's high-voltage transmission. Because BPA markets power at cost from 31 federal dams, its rates are among the least expensive electricity in the country. The Ampere Annex project is a renovation of an exisiting 60-year-old standard warehouse building located within the Ross Complex.

  14. Comparison of Building Energy Modeling Programs: Building Loads

    E-Print Network [OSTI]

    LBNL-6034E Comparison of Building Energy Modeling Programs: Building Loads Dandan Zhu1 , Tianzhen Energy, the U.S.-China Clean Energy Research Center for Building Energy Efficiency, of the U;Comparison of Building Energy Modeling Programs: Building Loads A joint effort between Lawrence Berkeley

  15. New! Building Energy Standards Essentials for Plans Examiners & Building Inspectors

    E-Print Network [OSTI]

    New! Building Energy Standards Essentials for Plans Examiners & Building Inspectors Building energy codes are complex. Plans examiners and building inspectors are expected to understand and enforce energy savings. This new, hands-on course strives to provide plans examiners and building inspectors

  16. Engineering Building a better

    E-Print Network [OSTI]

    Barthelat, Francois

    and modern buildings laid out around an oasis of green space. Much like the multicultural population restoration, waste reduction, climate change impact mitigation and air pollution abatement. + 5 COURSESCivil Engineering future Building a better #12;McGill University Montreal, with a population

  17. BUILDING ENERGY 1987 Edition

    E-Print Network [OSTI]

    changes in lighting control and HVAC requirements. The lighting control requirements in Section 2-5319(a, are required for all alterations. The HVAC requirements of new buildings are requ ired for some HVAC alterat for a wide variety of building shapes. "SECOND GENERATioN" ALTERNATIVE HVAC COMPLIANCE CODIFIED 4

  18. Building Technologies Research and

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    Impact of Buildings Centers of Excellence · 40% of total primary energy consumption · 74% of electricity consumption · 56% of natural gas consumption (including gas-generated electricity used in buildings) · 39 the nation accounts for its energy consumption, making the energy savings potential even greater. National

  19. High Performance Sustainable Building

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-06-20T23:59:59.000Z

    The guide supports DOE O 413.3A and provides useful information on the incorporation of high performance sustainable building principles into building-related General Plant Projects and Institutional General Plant Projects at DOE sites. Canceled by DOE G 413.3-6A. Does not cancel other directives.

  20. PHOTOVOLTAICS AND COMMERCIAL BUILDINGS--

    E-Print Network [OSTI]

    Perez, Richard R.

    management of electricity demand. · PV applications are now being integrated directly into building roofs, Valuation of Demand-Side Commercial PV Systems in the United States, we sought to measure the costPHOTOVOLTAICS AND COMMERCIAL BUILDINGS-- A NATURAL MATCH A study highlighting strategic

  1. BUILDING PERFORMANCE ENGINEERING DURING CONSTRUCTION

    E-Print Network [OSTI]

    Toole, T. Michael

    1 BUILDING PERFORMANCE ENGINEERING DURING CONSTRUCTION T. Michael Toole1 and Matthew Hallowell2 of building performance engineering tasks on design-bid-build projects are typically provided by entities building construction projects. Twenty four building performance engineering tasks were required

  2. About Singapore Green Building Council

    E-Print Network [OSTI]

    About Singapore Green Building Council About SGBC Green Building Conference Conference Programme Green Building Conference In line with the mission of the Singapore Green Building Council (SGBC is please to present the inaugural SGBC Green Building Conference 2010 to be held from 13 ­ 16 September

  3. NREL Buildings Research Video

    ScienceCinema (OSTI)

    None

    2013-05-29T23:59:59.000Z

    Through research, the National Renewable Energy Laboratory (NREL) has developed many strategies and design techniques to ensure both commercial and residential buildings use as little energy as possible and also work well with the surroundings. Here you will find a video that introduces the work of NREL Buildings Research, highlights some of the facilities on the NREL campus, and demonstrates these efficient building strategies. Watch this video to see design highlights of the Science and Technology Facility on the NREL campus?the first Federal building to be LEED® Platinum certified. Additionally, the video demonstrates the energy-saving features of NRELs Thermal Test Facility. For a text version of this video visit http://www.nrel.gov/buildings/about_research_text_version.html

  4. City of Scottsdale- Green Building Policy for Public Buildings

    Broader source: Energy.gov [DOE]

    In 2005, Scottsdale approved a green building policy for new city buildings and remodels. The resolution requires all new, occupied city buildings of any size to be designed, contracted and built...

  5. Solar electric buildings: An overview of today`s applications

    SciTech Connect (OSTI)

    NONE

    1997-02-01T23:59:59.000Z

    This brochure presents a broad look at photovoltaic-powered buildings. It includes residential and commercial systems, both stand-alone and connected to utility power, that are located in urban, near-urban, and rural settings around the world. As photovoltaic (PV) technology continues to improve and costs drop, opportunities for PV will multiply. PV systems for buildings, such as those shown here, represent one of the strongest near-term markets.

  6. Location-Sharing Technologies: Privacy Risks and Controls Janice Y. Tsai, Patrick Gage Kelley, Lorrie Faith Cranor, Norman Sadeh

    E-Print Network [OSTI]

    Sadeh, Norman M.

    , Lorrie Faith Cranor, Norman Sadeh Carnegie Mellon University Pittsburgh, PA jytsai@andrew.g. "Andrew has been located at 5000 Forbes Ave., Pittsburgh, PA"), or it may be map-based, where the user

  7. Hybrid Probabilistic RoadMap -Monte Carlo Motion Planning for Closed Chain Systems with

    E-Print Network [OSTI]

    Han, Li

    Hybrid Probabilistic RoadMap - Monte Carlo Motion Planning for Closed Chain Systems with Spherical@clarku.edu Abstract-- In this paper we propose a hybrid Probabilistic RoadMap - Monte Carlo (PRM-MC) motion planner and connect a large number of robot configurations in order to build a roadmap that reflects the properties

  8. Probabilistic Methods for Mobile Robot Mapping Dieter Fox 1 Wolfram Burgard 2 Sebastian Thrun 1

    E-Print Network [OSTI]

    Burgard, Wolfram

    ­ cessfully in numerous mobile robot systems. Occupancy grids are designed to estimate the occupancy of all hxProbabilistic Methods for Mobile Robot Mapping Dieter Fox 1 Wolfram Burgard 2 Sebastian Thrun 1 1 have shown to be well suited for dealing with the uncertainties involved in mo­ bile robot map building

  9. Scan with your phone for a mobile campus map.

    E-Print Network [OSTI]

    Noble, William Stafford

    Scan with your phone for a mobile campus map. Drumheller Fountain Portage Bay Lake Washington Ship Meany Schmitz Hansee Haggett North Physics Laboratory Portage Bay Parking Facility Odegaard Undergrad South Experimental Education Unit PortageBayBuilding South Cam pus Center OceanTch. M arine Sciences

  10. Presentation: Better Buildings Residential Program Solution Center...

    Office of Environmental Management (EM)

    Presentation: Better Buildings Residential Program Solution Center Presentation: Better Buildings Residential Program Solution Center Presentation: Better Buildings Residential...

  11. Building Technologies Program | Clean Energy | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Technologies Program SHARE Building Technologies Program The Building Technologies Program Office administratively facilitates the integration of ORNL research across...

  12. Information Technology Tools for Multifamily Building Programs...

    Energy Savers [EERE]

    Information Technology Tools for Multifamily Building Programs Information Technology Tools for Multifamily Building Programs Better Buildings Neighborhood Program Multifamily ...

  13. Building America Webinar: Retrofit Ventilation Strategies in...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategies in Multifamily Buildings Webinar Building America Webinar: Retrofit Ventilation Strategies in Multifamily Buildings Webinar This webinar, presented by...

  14. Better Buildings Residential Program Solution Center Demonstration...

    Energy Savers [EERE]

    Better Buildings Residential Program Solution Center Demonstration Better Buildings Residential Program Solution Center Demonstration Better Buildings Residential Program Solution...

  15. Membership Criteria: Better Buildings Residential Network | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Membership Criteria: Better Buildings Residential Network Membership Criteria: Better Buildings Residential Network Membership Criteria: Better Buildings Residential Network...

  16. Better Buildings Neighborhood Program Grant Recipient Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Buildings Neighborhood Program Grant Recipient Management Handbook Better Buildings Neighborhood Program Grant Recipient Management Handbook Better Buildings Neighborhood...

  17. Model Predictive Control for Energy Efficient Buildings

    E-Print Network [OSTI]

    Ma, Yudong

    2012-01-01T23:59:59.000Z

    Building thermal loadThe building thermal load predictor. . . . . . . .of Figures 1.1 Classification schematic for building MPC

  18. Building America Solution Center - Building America Top Innovation...

    Energy Savers [EERE]

    America Top Innovation SCimagemale.jpg The Building America Solution Center is a Web-based tool connecting users to fast, free, and expert building science and energy...

  19. Better Buildings Neighborhood Initiative Upgrades 100,000 Buildings...

    Broader source: Energy.gov (indexed) [DOE]

    Building on President Obama's Climate Action Plan and the Administration's Better Buildings Initiative, the Energy Department announced today that the Department's Better...

  20. A Look at Principal Building Activities in Commercial Buildings

    Gasoline and Diesel Fuel Update (EIA)

    Buildings Home> Special Topics > 1995 Principal Building Activities Office Education Health Care Retail and Service Food Service Food Sales Lodging Religious Worship Public...

  1. Webinar: Make Your Building Sing!: Building-Retuning to Reduce...

    Broader source: Energy.gov (indexed) [DOE]

    (PNNL) developed a curricula focused on retuning both large (with a building automation system, or BAS) and small (without a BAS) commercial buildings. Hear from Better...

  2. Building America Webinar: Building America Technology-to-Market...

    Broader source: Energy.gov (indexed) [DOE]

    introduced the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America's research, development, and demonstration activities over...

  3. Synchronized sampling improves fault location

    SciTech Connect (OSTI)

    Kezunovic, M. [Texas A and M Univ., College Station, TX (United States)] [Texas A and M Univ., College Station, TX (United States); Perunicic, B. [Lamar Univ., Beaumont, TX (United States)] [Lamar Univ., Beaumont, TX (United States)

    1995-04-01T23:59:59.000Z

    Transmission line faults must be located accurately to allow maintenance crews to arrive at the scene and repair the faulted section as soon as possible. Rugged terrain and geographical layout cause some sections of power transmission lines to be difficult to reach. In the past, a variety of fault location algorithms were introduced as either an add-on feature in protective relays or stand-alone implementation in fault locators. In both cases, the measurements of current and voltages were taken at one terminal of a transmission line only. Under such conditions, it may become difficult to determine the fault location accurately, since data from other transmission line ends are required for more precise computations. In the absence of data from the other end, existing algorithms have accuracy problems under several circumstances, such as varying switching and loading conditions, fault infeed from the other end, and random value of fault resistance. Most of the one-end algorithms were based on estimation of voltage and current phasors. The need to estimate phasors introduces additional difficulty in high-speed tripping situations where the algorithms may not be fast enough in determining fault location accurately before the current signals disappear due to the relay operation and breaker opening. This article introduces a unique concept of high-speed fault location that can be implemented either as a simple add-on to the digital fault recorders (DFRs) or as a stand-alone new relaying function. This advanced concept is based on the use of voltage and current samples that are synchronously taken at both ends of a transmission line. This sampling technique can be made readily available in some new DFR designs incorporating receivers for accurate sampling clock synchronization using the satellite Global Positioning System (GPS).

  4. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01T23:59:59.000Z

    Seven recent energy-efficient U.S. office buildings areSeven recent energy-efficient U.S. office buildings are18, 1983. PROGRESS IN ENERGY EFFICIENT BUILDINGS Leonard W.

  5. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01T23:59:59.000Z

    the case for building energy-efficiency labels. 3.1 Trendsenergy efficiency. Building energy efficiency labels are anThe use of building energy efficiency labels may be the

  6. GREEN BUILDINGS IN CHALLENGES AND

    E-Print Network [OSTI]

    Delaware, University of

    GREEN BUILDINGS IN DELAWARE: CHALLENGES AND OPPORTUNITIES FINAL REPORT A Renewable Energy-8405 Telefax: (302) 831-3098 Website: http://ceep.udel.edu #12;GREEN BUILDINGS IN DELAWARE: CHALLENGES .......................................................................................................2 2.1. Green Buildings

  7. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    Breakdown of Total  Electricty Consumption ? Building A kWh/Breakdown of Total  Electricty Consumption ? Building B kWh/Breakdown of Total   Electricty Consumption ? Building C 

  8. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    a future with very low energy buildings resulting in very making  for  low  energy  buildings.   This  project  will and operation of low energy buildings.  Several studies, 

  9. Location logistics of industrial facilities

    E-Print Network [OSTI]

    Hammack, William Eugene

    1981-01-01T23:59:59.000Z

    of company intent1ons is not made at the correct time and in the correct manner. 6. Recommend Best Areas for Further Invest1 ations. Once the on-site evaluations have been completed, the 11st of possibilities is reduced still further and only the best... location and site selection. This data was gathered through library research, atten- dance of various industr1al development conferences, sol1citation of mater1als from individuals currently involved with industrial facil1ties location, and various...

  10. Green Energy Standards for Public Buildings

    Broader source: Energy.gov [DOE]

    In March 2012, West Virginia enacted the Green Buildings Act, which applies to all new construction of public buildings, buildings receiving state grant funds, and buildings receiving state...

  11. Building America Webinar: National Residential Efficiency Measures...

    Energy Savers [EERE]

    Database Webinar Slides Building America Webinar: Saving Energy in Multifamily Buildings Building America Webinar: Retrofit Ventilation Strategies in Multifamily Buildings Webinar...

  12. Building-integrated photovoltaics

    SciTech Connect (OSTI)

    NONE

    1993-01-01T23:59:59.000Z

    This is a study of the issues and opportunities for building-integrated PV products, seen primarily from the perspective of the design community. Although some quantitative analysis is included, and limited interviews are used, the essence of the study is qualitative and subjective. It is intended as an aid to policy makers and members of the technical community in planning and setting priorities for further study and product development. It is important to remember that the success of a product in the building market is not only dependent upon its economic value; the diverse group of building owners, managers, regulators, designers, tenants and users must also find it practical, aesthetically appealing and safe. The report is divided into 11 sections. A discussion of technical and planning considerations is followed by illustrative diagrams of different wall and roof assemblies representing a range of possible PV-integration schemes. Following the diagrams, several of these assemblies are then applied to a conceptual test building which is analyzed for PV performance. Finally, a discussion of mechanical/electrical building products incorporating PVs is followed by a brief surveys of cost issues, market potential and code implications. The scope of this report is such that most of the discussion does not go beyond stating the questions. A more detailed analysis will be necessary to establish the true costs and benefits PVs may provide to buildings, taking into account PV power revenue, construction costs, and hidden costs and benefits to building utility and marketability.

  13. IMPACT OF THE CLIMATE ON THE DESIGN OF LOW-ENERGY BUILDINGS FOR AUSTRALIA AND REUNION ISLAND

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    IMPACT OF THE CLIMATE ON THE DESIGN OF LOW-ENERGY BUILDINGS FOR AUSTRALIA AND REUNION ISLAND B of low energy building. This approach is to perform a real evaluation of the sensation of thermal comfort. This article discusses the comparison of the thermal comfort levels obtained in the same building located

  14. Regularity of mappings inverse to Sobolev mappings

    SciTech Connect (OSTI)

    Vodop'yanov, Sergei K [S.L. Sobolev Institute for Mathematics, Siberian Branch of the Russian Academy of Sciences, Novosibirsk (Russian Federation)

    2012-10-31T23:59:59.000Z

    For homeomorphisms {phi}:{Omega}{yields}{Omega}' on Euclidean domains in R{sup n}, n{>=}2, necessary and sufficient conditions ensuring that the inverse mapping belongs to a Sobolev class are investigated. The result obtained is used to describe a new two-index scale of homeomorphisms in some Sobolev class such that their inverses also form a two-index scale of mappings, in another Sobolev class. This scale involves quasiconformal mappings and also homeomorphisms in the Sobolev class W{sup 1}{sub n-1} such that rankD{phi}(x){<=}n-2 almost everywhere on the zero set of the Jacobian det D{phi}(x). Bibliography: 65 titles.

  15. Mapping in the Cloud: Working with Google Maps and other Mapping Services

    E-Print Network [OSTI]

    Peterson, Michael

    2014-11-19T23:59:59.000Z

    :document.getElementById('map'), /*ID of element on the page where you want the map added*/ zoom:10, /*initial zoom level of map*/ latLng:{lat:39.743943, lng:-105.020089}, /*center of map in latitude/longitude*/ mtype...:'map' /*map type (map)*/ }; /*Construct an instance of MQA.TileMap with the options object*/ window.map = new MQA.TileMap(options); /*An example using the MQA.Poi constructor. You will need to pass in an object containing the lat (Latitude) and lng (Longitude...

  16. BETTER BUILDINGS ALLIANCE

    Office of Energy Efficiency and Renewable Energy (EERE)

    Commercial buildings—our offices, schools, hospitals, restaurants, hotels and stores—consume nearly 20% of all energy used in the United States. We spend more than $200 billion each year to power our country's commercial buildings. Unfortunately, much of this energy and money is wasted; a typical commercial building could save 20% on its energy bills simply by commissioning existing systems so they operate as intended. Energy efficiency is a cost-effective way to save money, support job growth, reduce pollution, and improve competitiveness.

  17. INL Green Building Strategy

    SciTech Connect (OSTI)

    Jennifer Dalton

    2005-05-01T23:59:59.000Z

    Green buildings, also known as sustainable buildings, resource efficient buildings, and high performance buildings, are structures that minimize the impact on the environment by using less energy and water, reducing solid waste and pollutants, and limiting the depletion of natural resources. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish the mission. This infrastructure, particularly the buildings, should incorporate green design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. With this in mind, the recommendations described in this strategy are intended to form the INL foundation for green building standards. The recommendations in this strategy are broken down into three levels: Baseline Minimum, Leadership in Energy and Environmental Design (LEED)Certification, and Innovative. Baseline Minimum features should be included in all new occupied buildings no matter what the purpose or size. These features do not require significant research, design, or capital costs and yet they can reduce Operation and Maintenance (O&M) costs and produce more environmentally friendly buildings. LEED Certification features are more aggressive than the Baseline Minimums in that they require documentation, studies, and/or additional funding. Combined with the Baseline Minimums, many of the features in this level will need to be implemented to achieve the goal of LEED certification. LEED Silver certification should be the minimum goal for all new buildings (including office buildings, laboratories, cafeterias, and visitor centers) greater than 25,000 square feet or a total cost of $10 million. Innovative features can also contribute to LEED certification, but are less mainstream than those listed in the previous two levels. These features are identified as areas where INL can demonstrate leadership but they could require significant upfront cost, additional studies, and/or development. Appendix A includes a checklist summary of the INL Green Building Strategy that can be used as a tool during the design process when considering which green building features to include. It provides a quick reference for determining which strategies have lower or no increased capital cost, yield lower O&M costs, increase employee productivity, and contribute to LEED certification.

  18. Worldwide status of energy standards for buildings: Appendices

    SciTech Connect (OSTI)

    Janda, K.B.; Busch, J.F.

    1993-02-01T23:59:59.000Z

    This informal survey was designed to gain information about the worldwide status of energy efficiency standards for buildings, particularly non-residential buildings such as offices, schools, and hotels. The project has three goals: 1. To understand and learn from the experience of countries with existing building energy standards; 2. To locate areas where these lessons might be applied and energy standards might be effectively proposed and developed; and 3. To share the information gathered with all participating countries. These appendices include the survey cover letter, the survey, and the details of selected energy standards in 35 countries, thus providing supporting material for the authors` article of the same title.

  19. Indoor-Outdoor Air Leakage of Apartments and Commercial Buildings

    SciTech Connect (OSTI)

    Price, P.N.; Shehabi, A.; Chan, R.W.; Gadgil, A.J.

    2006-06-01T23:59:59.000Z

    We compiled and analyzed available data concerning indoor-outdoor air leakage rates and building leakiness parameters for commercial buildings and apartments. We analyzed the data, and reviewed the related literature, to determine the current state of knowledge of the statistical distribution of air exchange rates and related parameters for California buildings, and to identify significant gaps in the current knowledge and data. Very few data were found from California buildings, so we compiled data from other states and some other countries. Even when data from other developed countries were included, data were sparse and few conclusive statements were possible. Little systematic variation in building leakage with construction type, building activity type, height, size, or location within the u.s. was observed. Commercial buildings and apartments seem to be about twice as leaky as single-family houses, per unit of building envelope area. Although further work collecting and analyzing leakage data might be useful, we suggest that a more important issue may be the transport of pollutants between units in apartments and mixed-use buildings, an under-studied phenomenon that may expose occupants to high levels of pollutants such as tobacco smoke or dry cleaning fumes.

  20. Approximation of Harmonic Maps and Wave Maps Soren Bartels

    E-Print Network [OSTI]

    Bartels, Soeren

    Approximation of Harmonic Maps and Wave Maps S¨oren Bartels Partial differential equations to certain boundary condtions. If X = then critical points u : N are called harmonic maps into N, ·) = u0, tu(0, ·) = v0. To approximate harmonic maps or wave maps we consider a regular triangula- tion

  1. Buildings to Grid Integration & Interoperability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings to Grid Integration & Interoperability Joe Hagerman, Senior Advisor DOE Building Technologies Office March 11, 2013 EERE: Office of Energy Efficiency and Renewable Energy...

  2. Solar Ready Buildings Planning Guide

    SciTech Connect (OSTI)

    Lisell, L.; Tetreault, T.; Watson, A.

    2009-12-01T23:59:59.000Z

    This guide offers a checklist for building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

  3. The Economics of Green Building

    E-Print Network [OSTI]

    Eichholtz, Piet; Kok, Nils; Quigley, John M.

    2010-01-01T23:59:59.000Z

    Even among green buildings, increased energy efficiency isof total returns to energy efficient and green constructionof Energy and Indoor Environment Quality in Green Buildings:

  4. Frederick County- Green Building Program

    Broader source: Energy.gov [DOE]

    Frederick County administers a green building program. It has two goals: (1) to ensure that County building projects implement strategies that enhance environmental performance and fiscal...

  5. Building Random Trees from Blocks

    E-Print Network [OSTI]

    2012-09-18T23:59:59.000Z

    Sep 18, 2012 ... We have a finite collection of unlabeled, rooted, nonplanar building ... We use these as building blocks of an unlabeled, rooted, nonplanar tree.

  6. Chapter 8: Constructing the Building

    Broader source: Energy.gov (indexed) [DOE]

    stormwater management functions. Professional development - Given the increas- ing demand for green buildings, knowledge of the skills needed to deliver these buildings will...

  7. Personalized building comfort control

    E-Print Network [OSTI]

    Feldmeier, Mark Christopher, 1974-

    2009-01-01T23:59:59.000Z

    Creating an appropriate indoor climate is essential to worker productivity and personal happiness. It is also an area of large expenditure for building owners. And, with rising fuel costs, finding ways of reducing energy ...

  8. Building Energy Efficient Schools

    E-Print Network [OSTI]

    McClure, J. D.; Estes, J. M.

    1985-01-01T23:59:59.000Z

    Many new school buildings consume only half the energy required by similar efficient structures designed without energy performance as a design criterion. These are comfortable and efficient while construction costs remain about the same as those...

  9. BUILDING A STRONG FOUNDATION.

    E-Print Network [OSTI]

    Linsley, Braddock K.

    BUILDING A STRONG FOUNDATION. UALBANY FACTS. Enrollment: 12,822 undergraduates 4,516 graduate ('14-'15): NYS Resident Tuition: $6,170 Non-NYS Resident Tuition: $17,810 Room, Board, and Fees: $15

  10. Building America Report Template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    January 27 and 28, 2014 Denver, Colorado Prepared for The U.S. Department of Energy's Building America Program Office of Energy Efficiency and Renewable Energy Prepared by Sam...

  11. Visualizing a Living Building

    E-Print Network [OSTI]

    Padget, Steve

    2013-01-01T23:59:59.000Z

    This paper will chronicle the design process of the Odum School of Ecology at the University of Georgia and its objective to accomplish Living BuildingTM certification. In order to accomplish this, the architect (BNIM) and project partners applied...

  12. Building Energy Standards

    Broader source: Energy.gov [DOE]

    The 2015 Vermont Commercial Building Energy Standards (CBES) took effect on March 1, 2015. The code is based on the 2015 IECC, with amendments to incorporate ASHRAE 90.1-2013. The new guidelines ...

  13. High Performance Sustainable Building

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-11-09T23:59:59.000Z

    This Guide provides approaches for implementing the High Performance Sustainable Building (HPSB) requirements of DOE Order 413.3B, Program and Project Management for the Acquisition of Capital Assets. Cancels DOE G 413.3-6.

  14. Guam- Building Energy Code

    Broader source: Energy.gov [DOE]

    NOTE: In September 2012, The Guam Building Code Council adopted the draft [http://www.guamenergy.com/outreach-education/guam-tropical-energy-code/ Guam Tropical Energy Code]. It must be adopted by...

  15. Relationships in design build

    E-Print Network [OSTI]

    Wampler, Charles Wilson

    2010-01-01T23:59:59.000Z

    As design build (DB) becomes more popular, different ways of writing contracts and forming relationships with the various parties are being considered. The main point of this paper is to look at the relationships between ...

  16. Building Technologies Office

    Office of Environmental Management (EM)

    energy-efficient solutions Lower building energy use by 50% Double U.S. energy productivity Aiming High for 2030 Annual energy use by 20 quads 1 billion metric tons CO 2 200...

  17. Building Energy Code

    Broader source: Energy.gov [DOE]

    All new residential, commercial, and community-owned buildings constructed on or after January 1, 1992 that recieve financing from the Alaska Housing Finance Corporation (AHFC) must comply with...

  18. Safety in Buildings 

    E-Print Network [OSTI]

    Hutcheon, N. B.

    Building codes are essentially sets of safety regulations in respect of structure, fire, and health. They were originally developed in response to frequently demonstrated hazards of structural collapse, catastrophic fires, ...

  19. Systems building in architecture

    E-Print Network [OSTI]

    Tzannetakis, Charilaos Panayotis

    1983-01-01T23:59:59.000Z

    This work is an inquiry into the interventions of the systems design in the whole building process. At the beginning, three approaches which represent different points of view of interventions in production and use are ...

  20. Wind Tunnel Building - 1 

    E-Print Network [OSTI]

    Unknown

    2005-06-30T23:59:59.000Z

    This paper describes a simple graphic tool that enables a building designer to evaluate the potential for wind induced ventilation cooling in several climate zones. Long term weather data were analyzed to determine the conditions for which available...

  1. Passive solar buildings research

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1992-12-31T23:59:59.000Z

    This chapter covers research advances in passive solar buildings research during the time span from 1982 through 1991. These advances fall within the following categories: (1) short-term energy monitoring, (2) heat transport by natural convection within buildings, and (3) design guidelines and design tools. In short-term energy monitoring, a simulation model of the building is calibrated, based on data taken in a 3-day test. The method accurately predicts performance over an extended period. Heat transport through doorways is characterized for complex situations that arise in passive solar buildings. Simple concepts and models adequately describe the energy transport in many situations of interest. In a new approach, design guidelines are automatically generated for any specific locality. Worksheets or an accompanying computer program allow the designer to quickly and accurately evaluate performance and investigate design alternatives. 29 refs., 19 figs., 2 tabs.

  2. User's manual for RESRAD-BUILD version 3.

    SciTech Connect (OSTI)

    Yu, C.; LePoire, D. J.; Cheng, J. J.; Gnanapragasam, E.; Arnish, J.; Biwer, B. M.; Zielen, A. J.; Williams, W. A.; Wallo, A., III; Peterson, H. T., Jr.

    2003-07-31T23:59:59.000Z

    The RESRAD-BUILD computer code is a pathway analysis model designed to evaluate the potential radiological dose incurred by an individual who works or lives in a building contaminated with radioactive material. The transport of radioactive material within the building from one compartment to another is calculated with an indoor air quality model. The air quality model considers the transport of radioactive dust particulates and radon progeny due to air exchange, deposition and resuspension, and radioactive decay and ingrowth. A single run of the RESRAD-BUILD code can model a building with up to three compartments, four source geometries (point, line, area, and volume), 10 distinct source locations, and 10 receptor locations. The volume source can be composed of up to five layers of different materials, with each layer being homogeneous and isotropic. A shielding material can be specified between each source-receptor pair for external gamma dose calculations. The user can select shielding material from eight different material types. Seven exposure pathways are considered in the RESRAD-BUILD code: (1) external exposure directly from the source, (2) external exposure to materials deposited on the floor, (3) external exposure due to air submersion, (4) inhalation of airborne radioactive particulates, (5) inhalation of aerosol indoor radon progeny and tritiated water vapor, (6) inadvertent ingestion of radioactive material directly from the source, and (7) ingestion of materials deposited on the surfaces of the building compartments. Various exposure scenarios may be modeled with the RESRAD-BUILD code. These include, but are not limited to, office worker, renovation worker, decontamination worker, building visitor, and residency scenarios. Both deterministic and probabilistic dose analyses can be performed with RESRAD-BUILD, and the results can be shown in both text and graphic reports.

  3. Geologic Map and GIS Data for the Tuscarora Geothermal Area

    SciTech Connect (OSTI)

    Faulds, James E.

    2013-12-31T23:59:59.000Z

    Tuscarora—ESRI Geodatabase (ArcGeology v1.3): - Contains all the geologic map data, including faults, contacts, folds, unit polygons, and attitudes of strata and faults. - List of stratigraphic units and stratigraphic correlation diagram. - Detailed unit descriptions of stratigraphic units. - Five cross?sections. - Locations of production, injection, and monitor wells. - 3D model constructed with EarthVision using geologic map data, cross?sections, drill?hole data, and geophysics (model not in the ESRI geodatabase).

  4. Building Performance Simulation

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    map  for  the  17  representative  cities  based  on  the Climate type Criteria Representative city 1A 1B 2A 2B 3A 3Bcriteria, and representative cities for the 17 climates –

  5. High Performance Buildings Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The High Performance Buildings Database is a shared resource for the building industry, a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad. The database includes information on the energy use, environmental performance, design process, finances, and other aspects of each project. Members of the design and construction teams are listed, as are sources for additional information. In total, up to twelve screens of detailed information are provided for each project profile. Projects range in size from small single-family homes or tenant fit-outs within buildings to large commercial and institutional buildings and even entire campuses. The database is a data repository as well. A series of Web-based data-entry templates allows anyone to enter information about a building project into the database. Once a project has been submitted, each of the partner organizations can review the entry and choose whether or not to publish that particular project on its own Web site.

  6. The Ruskin Building 4.1 Building Condition

    E-Print Network [OSTI]

    Flynn, E. Victor

    39 The Ruskin Building 04 #12;40 4.1 Building Condition TEACHING ROOMS STUDENT ANCILLARY ADMIN First Floor Plan Second Floor Plan Third Floor Plan 4.1 Building Condition This Section provides an overview of the condition of the existing buildings. Below is a series of plans identifying the present

  7. 3-100.1 Building Evacuation 1 Building Evacuation

    E-Print Network [OSTI]

    Glebov, Leon

    3-100.1 Building Evacuation 1 SUBJECT: Building Evacuation Effective Date: 10-20-10 Policy Number and Safety APPLICABILITY/ACCOUNTABILITY: This policy applies to all individuals in all buildings on all University of Central Florida campuses. BACKGROUND INFORMATION: University buildings occasionally need

  8. 1 | Building America eere.energy.gov DOE's Building America

    E-Print Network [OSTI]

    1 | Building America eere.energy.gov DOE's Building America Low-E Storm Window Adoption Program Working Group #12;2 | Building America eere.energy.gov Pacific Northwest National Laboratory · Katie Cort, Larson Manufacturing Company Key Staff #12;3 | Building America eere.energy.gov Problem · Windows account

  9. Building Knowledge about Buildings Matthew T. Young and Eyal Amir

    E-Print Network [OSTI]

    Amir, Eyal

    Building Knowledge about Buildings Matthew T. Young and Eyal Amir University of Illinois, Urbana The ability to encode information about the structure of buildings is essential for the development of applications which are able to reason about buildings and answer queries concerning their design and function

  10. Building anBuilding an Entrepreneurship ProgramEntrepreneurship Program

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    Building anBuilding an Entrepreneurship ProgramEntrepreneurship Program At Your UniversityAt Your University Tina L. Seelig REE Latin America November 24 - 26, 2004 #12;Question of the Day: How do you build innovation Build networks within our own universities Create relationships with industry Develop

  11. BUILDING A RISK MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PL LDING A RISK MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PLAN

    E-Print Network [OSTI]

    Florida, University of

    BUILDING A RISK MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PL LDING A RISK MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PLAN MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PLAN BUILDING A R RISK MANAGEMENT PLAN BUILDING A RISK MANAGEMENT PLAN BUILDIN T PLAN BUILDING A RISK MANAGEMENT PLAN BUILDING A RISK MANAGEM

  12. Small- and Medium-Sized Commercial Building Monitoring and Controls Needs: A Scoping Study

    SciTech Connect (OSTI)

    Katipamula, Srinivas; Underhill, Ronald M.; Goddard, James K.; Taasevigen, Danny J.; Piette, M. A.; Granderson, J.; Brown, Rich E.; Lanzisera, Steven M.; Kuruganti, T.

    2012-10-31T23:59:59.000Z

    Buildings consume over 40% of the total energy consumption in the U.S. A significant portion of the energy consumed in buildings is wasted because of the lack of controls or the inability to use existing building automation systems (BASs) properly. Much of the waste occurs because of our inability to manage and controls buildings efficiently. Over 90% of the buildings are either small-size (<5,000 sf) or medium-size (between 5,000 sf and 50,000 sf); these buildings currently do not use BASs to monitor and control their building systems from a central location. According to Commercial Building Energy Consumption Survey (CBECS), about 10% of the buildings in the U.S. use BASs or central controls to manage their building system operations. Buildings that use BASs are typically large (>100,000 sf). Lawrence Berkeley National Laboratory (LBNL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) were asked by the U.S. Department of Energy’s (DOE’s) Building Technologies Program (BTP) to identify monitoring and control needs for small- and medium-sized commercial buildings and recommend possible solutions. This study documents the needs and solutions for small- and medium-sized buildings.

  13. Joint microseismic event location with uncertain velocity

    E-Print Network [OSTI]

    Poliannikov, Oleg V.

    2013-01-01T23:59:59.000Z

    We study the problem of the joint location of seismic events using an array of receivers. We show that locating multiple seismic events simultaneously is advantageous compared to the more traditional approaches of locating ...

  14. Summer Housing for Interns University Center: http://chicagosummerhousing.com/ Located in downtown Chicago's South Loop neighborhood.

    E-Print Network [OSTI]

    Shull, Kenneth R.

    Summer Housing for Interns CHICAGO University Center: http://chicagosummerhousing.com/ Located in downtown Chicago, close to Michigan Avenue. School of the Art Institute of Chicago: http://www.saic.edu/life/sum_int_hous/index.html#overview/top Located on State Street in downtown Chicago. The building also houses the Gene Siskel Film Center

  15. Opportunities to Save Energy and Improve Comfort by Using Wireless Sensor Networks in Buildings 

    E-Print Network [OSTI]

    Wang, D.; Arens, E.; Federspiel, C.

    2003-01-01T23:59:59.000Z

    This paper discusses how intensive information technology can affect future building operation. Recent breakthroughs in wireless sensor network technology will permit 1) highly flexible location of sensors, 2) increased sensing density and variety...

  16. CALIFORNIA ENERGY Large HVAC Building

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION Large HVAC Building Survey Information Database of Buildings over 100 Energy Systems: Productivity and Building Science Program. This program was funded by the California of Portland Energy Conservation, Inc. Project Management: Cathy Higgins, Program Director for New Buildings

  17. To Collaborative LIfe Sciences Building

    E-Print Network [OSTI]

    To Collaborative LIfe Sciences Building To Professional Development Center Collaborative Life Sciences Building SW MEADE SW PORTER SW M OODY I-5 To Main Campus To South Waterfront I-405 Collaborative Life Sciences Building 0650 SW Meade St. Academic & Student Recreation Center (ASRC) C8 Art Building

  18. Manning building RoyalParade

    E-Print Network [OSTI]

    Sekercioglu, Y. Ahmet

    Manning building (403) MileLane RoyalParade RoyalParade Tram stop No.16Walker Street Scott building (402) Sissons building (401) 399 Royal Parade (404) 381 Royal Parade Cafeteria Cossar Hall Main of Pharmacy and Pharmaceutical Sciences Building 401 G Reception G Student services G Cossar Hall G Sissons

  19. Building Name Room Support By

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Building Name Room Technology Classroom? Technology Support By: Phone Number: Contact Name: Agricultural Sciences Building G29 Standard iDC 304-293-2832 n/a Agricultural Sciences Building G31 Standard iDC 304-293-2832 n/a Agricultural Sciences Building G101 Standard iDC 304-293-2832 n/a Agricultural

  20. International Trends in Green Building

    E-Print Network [OSTI]

    Zhang, Junshan

    International Trends in Green Building Friday, August 26, 2011 Registration 8:00 a.m. Presentation, Canada Green Building Council The presentation will cover international trends and innovations in the green-building industry as well as new opportunities for green-building collaboration with Arizona

  1. Building America Building Science Education Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy Future of CSP:Brookhaven Teaching FellowsBuilderHVACR BUILDING

  2. Building Technologies Program: Building America Publications

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you wantJoin usAcquisitionAlex3EnergyBuilding RemovalProgram HOME

  3. Energy Department Launches Alternative Fueling Station Locator...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department Launches Alternative Fueling Station Locator App Energy Department Launches Alternative Fueling Station Locator App November 7, 2013 - 11:16am Addthis As part of...

  4. Asymptotic analysis of an optimal location problem

    E-Print Network [OSTI]

    2003-05-13T23:59:59.000Z

    Asymptotic analysis of an optimal location problem. One considers the problem of optimal location of masses(say production centers) in order to approximate a ...

  5. Method for mapping charge pulses in semiconductor radiation detectors

    SciTech Connect (OSTI)

    Prettyman, T.H.

    1998-12-01T23:59:59.000Z

    An efficient method for determining the distribution of charge pulses produced by semiconductor detectors is presented. The method is based on a quasi-steady-state model for semiconductor detector operation. A complete description of the model and underlying assumptions is given. Mapping of charge pulses is accomplished by solving an adjoint carrier continuity equation. The solution of the adjoint equation yields Green`s function, a time- and position-dependent map that contains all possible charge pulses that can be produced by the detector for charge generated at discrete locations (e.g., by gamma-ray interactions). Because the map is generated by solving a single, time-dependent problem, the potential for reduction in computational effort over direct mapping methods is significant, particularly for detectors with complex electrode structures. In this paper, the adjoint equation is derived and the mapping method is illustrated for a simple case.

  6. RIVER CORRIDOR BUILDINGS 324 & 327 CLEANUP

    SciTech Connect (OSTI)

    BAZZELL, K.D.; SMITH, B.A.

    2006-02-09T23:59:59.000Z

    A major challenge in the recently awarded River Corridor Closure (RCC) Contract at the U.S. Department of Energy's (DOE) Hanford Site is decontaminating and demolishing (D&D) facilities in the 300 Area. Located along the banks of the Columbia River about one mile north of Richland, Washington, the 2.5 km{sup 2} (1 mi{sup 2})300 Area comprises only a small part of the 1517 km{sup 2} (586 mi{sup 2}) Hanford Site. However, with more than 300 facilities ranging from clean to highly contaminated, D&D of those facilities represents a major challenge for Washington Closure Hanford (WCH), which manages the new RCC Project for DOE's Richland Operations Office (RL). A complicating factor for this work is the continued use of nearly a dozen facilities by the DOE's Pacific Northwest National Laboratory (PNNL). Most of the buildings will not be released to WCH until at least 2009--four years into the seven-year, $1.9 billion RCC Contract. The challenge will be to deactivate, decommission, decontaminate and demolish (D4) highly contaminated buildings, such as 324 and 327, without interrupting PNNL's operations in adjacent facilities. This paper focuses on the challenges associated with the D4 of the 324 Building and the 327 Building.

  7. Calibrating Building Energy Models Using Supercomputer Trained Machine Learning Agents

    SciTech Connect (OSTI)

    Sanyal, Jibonananda [ORNL] [ORNL; New, Joshua Ryan [ORNL] [ORNL; Edwards, Richard [ORNL] [ORNL; Parker, Lynne Edwards [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    Building Energy Modeling (BEM) is an approach to model the energy usage in buildings for design and retrofit purposes. EnergyPlus is the flagship Department of Energy software that performs BEM for different types of buildings. The input to EnergyPlus can often extend in the order of a few thousand parameters which have to be calibrated manually by an expert for realistic energy modeling. This makes it challenging and expensive thereby making building energy modeling unfeasible for smaller projects. In this paper, we describe the Autotune research which employs machine learning algorithms to generate agents for the different kinds of standard reference buildings in the U.S. building stock. The parametric space and the variety of building locations and types make this a challenging computational problem necessitating the use of supercomputers. Millions of EnergyPlus simulations are run on supercomputers which are subsequently used to train machine learning algorithms to generate agents. These agents, once created, can then run in a fraction of the time thereby allowing cost-effective calibration of building models.

  8. Open Automated Demand Response for Small Commerical Buildings

    SciTech Connect (OSTI)

    Dudley, June Han; Piette, Mary Ann; Koch, Ed; Hennage, Dan

    2009-05-01T23:59:59.000Z

    This report characterizes small commercial buildings by market segments, systems and end-uses; develops a framework for identifying demand response (DR) enabling technologies and communication means; and reports on the design and development of a low-cost OpenADR enabling technology that delivers demand reductions as a percentage of the total predicted building peak electric demand. The results show that small offices, restaurants and retail buildings are the major contributors making up over one third of the small commercial peak demand. The majority of the small commercial buildings in California are located in southern inland areas and the central valley. Single-zone packaged units with manual and programmable thermostat controls make up the majority of heating ventilation and air conditioning (HVAC) systems for small commercial buildings with less than 200 kW peak electric demand. Fluorescent tubes with magnetic ballast and manual controls dominate this customer group's lighting systems. There are various ways, each with its pros and cons for a particular application, to communicate with these systems and three methods to enable automated DR in small commercial buildings using the Open Automated Demand Response (or OpenADR) communications infrastructure. Development of DR strategies must consider building characteristics, such as weather sensitivity and load variability, as well as system design (i.e. under-sizing, under-lighting, over-sizing, etc). Finally, field tests show that requesting demand reductions as a percentage of the total building predicted peak electric demand is feasible using the OpenADR infrastructure.

  9. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your Home and It'llMapping Particle Charges inMappingMapping

  10. Community Development Department Building & Safety Division

    E-Print Network [OSTI]

    BUILDING, RESIDENTIAL AND GREEN BUILDING CODES, AMENDING FREMONT MUNICIPAL CODE TITLE vn (BUILDING TO ENERGY REGULATIONS THE 2010 CALIFORNIA,GREEN BUILDING CODE The City of Fremont proposed to adopt local................ Community Development Department Building & Safety Division 39550 Liberty Street

  11. Performance Metrics for Commercial Buildings

    SciTech Connect (OSTI)

    Fowler, Kimberly M.; Wang, Na; Romero, Rachel L.; Deru, Michael P.

    2010-09-30T23:59:59.000Z

    Commercial building owners and operators have requested a standard set of key performance metrics to provide a systematic way to evaluate the performance of their buildings. The performance metrics included in this document provide standard metrics for the energy, water, operations and maintenance, indoor environmental quality, purchasing, waste and recycling and transportation impact of their building. The metrics can be used for comparative performance analysis between existing buildings and industry standards to clarify the impact of sustainably designed and operated buildings.

  12. Commercial & Institutional Green Building Performance

    E-Print Network [OSTI]

    Harrison, S.; Mundell,C.; Meline, K.; Kraatz,J.

    2014-01-01T23:59:59.000Z

    Buildings Voluntary Green Building Programs: • LEED www.usgbc.org • Living Building Challenge living-future.org/lbc • Green Globes www.greenglobes.com • WELL Buildings wellbuildinginstitute.com • ENERGY STAR energystar.gov ESL-KT-14...The North Central Branch Texas Public Works Association Commercial & Institutional Green Building Performance 11.19.2014 ESL-KT-14-11-26 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Q&A Your Presenters: Chris...

  13. Affine maps of density matrices

    E-Print Network [OSTI]

    Thomas F. Jordan

    2004-11-21T23:59:59.000Z

    For quantum systems described by finite matrices, linear and affine maps of matrices are shown to provide equivalent descriptions of evolution of density matrices for a subsystem caused by unitary Hamiltonian evolution in a larger system; an affine map can be replaced by a linear map, and a linear map can be replaced by an affine map. There may be significant advantage in using an affine map. The linear map is generally not completely positive, but the linear part of an equivalent affine map can be chosen to be completely positive and related in the simplest possible way to the unitary Hamiltonian evolution in the larger system.

  14. DOE passive solar commercial buildings program: project summaries

    SciTech Connect (OSTI)

    Not Available

    1982-01-01T23:59:59.000Z

    The 23 projects participating in this program comprise a wide range of building types including offices, retail establishments, educational facilities, public service facilities, community and visitor centers, and private specialized-use facilities, located throughout the United States. Summary data and drawings are presented for each project. (MHR)

  15. Dating the Vinland Map

    ScienceCinema (OSTI)

    None

    2013-07-17T23:59:59.000Z

    Scientists from Brookhaven National Laboratory, the University of Arizona, and the Smithsonian Institution used carbon-dating technology to determine the age of a controversial parchment that might be the first-ever map of North America.

  16. Re-Building Greensburg

    ScienceCinema (OSTI)

    Hewitt, Steven; Wallach, Daniel; Peterson, Stephanie;

    2013-05-29T23:59:59.000Z

    Greensburg, KS - A town that was devastated by a tornado in 2007, yet came back to be one of the Nation's most energy-efficient, sustainable communities. Civic leaders and entrepreneurs helped rally residents behind the idea of "greening" Greensburg, inspiring the construction of numerous energy-efficient buildings, some of which generate their own renewable power with solar panels and wind turbines. Many of the town's government buildings use cutting edge energy-saving technologies, saving the local taxpayers' money. Greensburg has demonstrated to the world that any city can reach its energy efficiency and renewable energy goals today using widely available technologies.

  17. Filter Press Building

    E-Print Network [OSTI]

    Bush, W. M.

    " exemplifies the ultimate all-electric application. INTRODUCTION The City of Avon Lake launched a program in 1983 to eKpand and modernize its water pollution control facilities. A part of this expansion was construction of a separate building to house a...? was established as a year-round requirement for both management 585 ESL-IE-86-06-94 Proceedings from the Eighth Annual Industrial Energy Technology Conference, Houston, TX, June 17-19, 1986 ~>-:? ~ Filter Press Building Avon Lake Water Pollution Control...

  18. Historic Building Renovations

    Broader source: Energy.gov [DOE]

    When a Federal agency undertakes a renovation to an historic building, the renovation team must consider not only the uses and needs of the facility, but also a range of issues related to historic preservation. Integrating renewable energy such as solar and wind into an historic renovation has been accomplished successfully by agencies; the design and placement of any renewable energy system must be closely integrated with the overall design plans. Any renewable energy additions must maintain the integrity and defining characteristics of the building.

  19. Buildings Performance Database Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding Removal Ongoing at DOE's PaducahBuildingsEnergy

  20. Commercial Building Partnership

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave the WhiteNational BroadbandofCommercial Building EnergyBuilding

  1. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding Removal Ongoing at DOE's Paducah Site BuildingEnergy5

  2. Tactile robotic mapping of unknown surfaces: An application to oil well exploration

    E-Print Network [OSTI]

    Mazzini, Francesco

    World oil demand and advanced oil recovery techniques have made it economically attractive to rehabilitate previously abandoned oil wells. This requires relatively fast mapping of the shape and location of the down-hole ...

  3. Short range radio locator system

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1996-01-01T23:59:59.000Z

    A radio location system comprises a wireless transmitter that outputs two megahertz period bursts of two gigahertz radar carrier signals. A receiver system determines the position of the transmitter by the relative arrival of the radar bursts at several component receivers set up to have a favorable geometry and each one having a known location. One receiver provides a synchronizing gating pulse to itself and all the other receivers to sample the ether for the radar pulse. The rate of the synchronizing gating pulse is slightly offset from the rate of the radar bursts themselves, so that each sample collects one finely-detailed piece of information about the time-of-flight of the radar pulse to each receiver each pulse period. Thousands of sequential pulse periods provide corresponding thousand of pieces of information about the time-of-flight of the radar pulse to each receiver, in expanded, not real time. Therefore the signal processing can be done with relatively low-frequency, inexpensive components. A conventional microcomputer is then used to find the position of the transmitter by geometric triangulation based on the relative time-of-flight information.

  4. Energy Procedia 00 (2011) 000000 www.elsevier.com/locate/procedia

    E-Print Network [OSTI]

    Perez, Richard R.

    2011-01-01T23:59:59.000Z

    Code. It is also the model used for generating the CWEEDS (Canadian Weather Energy and Engineering Data and analysis in various applications, including buildings heating and cooling as well as solar systems. OverallEnergy Procedia 00 (2011) 000­000 Energy Procedia www.elsevier.com/locate/procedia SHC 2012

  5. Engineering Structures 29 (2007) 26412653 www.elsevier.com/locate/engstruct

    E-Print Network [OSTI]

    Chen, Xinzhong

    2007-01-01T23:59:59.000Z

    scanning of pressures on a building model surface in a wind tunnel, or by high frequency force balance of the generalized forces of the fundamental modes of vibration. The wind loading codes give simplified and oftenEngineering Structures 29 (2007) 2641­2653 www.elsevier.com/locate/engstruct Wind load effects

  6. Enabling Location-Aware Pervasive Computing Applications for the Elderly1

    E-Print Network [OSTI]

    Helal, Abdelsalam

    the smart home to make proactive decisions to better serve its occupants by enabling context and lessons learnt from our first phase work to build up a smart home infrastructure for the elderly. We Location Tracking, Ultrasonic Technology, Smart Home, OSGi, Elder Care, Successful Aging. 1. Introduction

  7. IBM NANOTECHNOLOGY CENTER Location: Campus of IBM Research -Zurich in Rschlikon, Switzerland

    E-Print Network [OSTI]

    BUILDING FACT SHEET IBM NANOTECHNOLOGY CENTER · Location: Campus of IBM Research - Zurich/normal labs: 1500 m2 PROJECT AREAS Working with partners, the Nanotechnology Center will focus on several Nanotechnology Center will continue IBM's tradition of environmental awareness and has been granted the use

  8. Partnership Building a Bridge

    E-Print Network [OSTI]

    will accelerate new ideas into clinical treatments for the prevention and cure of cancer. Cancer Research Clinical efficient translation of new discoveries into clinical treatments for the prevention and cure of cancerCancer Research Clinical Partnership Building a Bridge Between Purdue Discovery and Clinical

  9. SUSY Model Building

    E-Print Network [OSTI]

    Stuart Raby

    2007-10-19T23:59:59.000Z

    I review some of the latest directions in supersymmetric model building, focusing on SUSY breaking mechanisms in the minimal supersymmetric standard model [MSSM], the "little" hierarchy and $\\mu$ problems, etc. I then discuss SUSY GUTs and UV completions in string theory.

  10. String Model Building

    E-Print Network [OSTI]

    Stuart Raby

    2009-11-06T23:59:59.000Z

    In this talk I review some recent progress in heterotic and F theory model building. I then consider work in progress attempting to find the F theory dual to a class of heterotic orbifold models which come quite close to the MSSM.

  11. Buildings Energy Efficiency Policy

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    Efficiency Wind Biomass Natural Gas Combined Cycle Nuclear Coal IGCC Photovoltaics RangeofBuildings Energy Efficiency Policy ­ A Brief History Steven Nadel Executive Director American Council for an Energy- Efficient Economy #12;U.S. Energy Use in Relation to GDP 1970-2008 0.0 50.0 100

  12. Fire in Buildings 

    E-Print Network [OSTI]

    Shorter, G.

    During the lifetime of any building in Canada it is probable that one or more "unwanted" fires will occur. "Fire Loss in Canada, 1959," the report of the Dominion Fire Commissioner, states that for the period 1950-1959 the average number of reported...

  13. Moving Toward Zero Energy Buildings 

    E-Print Network [OSTI]

    Ginsberg, M.

    2008-01-01T23:59:59.000Z

    of Directors U.S. Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 00 12 02/ 5 86 - 12 11 mark.ginsberg@ee.doe.gov Moving Toward Zero Energy Buildings When I began discussing the idea of Zero Energy Buildings in the mid...-1990s, I received sceptical looks and laughter. Today, we are seeing the concept blossom into a large number of buildings throughout the world that are net zero fossil fuel buildings. I use the term zero energy buildings to mean ?buildings...

  14. Moving Toward Zero Energy Buildings

    E-Print Network [OSTI]

    Ginsberg, M.

    2008-01-01T23:59:59.000Z

    -1990s, I received sceptical looks and laughter. Today, we are seeing the concept blossom into a large number of buildings throughout the world that are net zero fossil fuel buildings. I use the term zero energy buildings to mean ?buildings... of Directors U.S. Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 00 12 02/ 5 86 - 12 11 mark.ginsberg@ee.doe.gov Moving Toward Zero Energy Buildings When I began discussing the idea of Zero Energy Buildings in the mid...

  15. Mitigating Climate Change Through Green Buildings and Smart Growth

    SciTech Connect (OSTI)

    Brown, Marilyn A [ORNL; Southworth, Frank [ORNL

    2008-01-01T23:59:59.000Z

    Energy-efficient buildings are seen by climate change experts as one of the least-cost approaches to mitigating greenhouse gas emissions. This paper summarizes a study done for the Pew Center on Global Climate Change that takes a broader look at the potential role of a climate-friendly built environment including not only considerations of how buildings are constructed and used, but also how they interface with the electric grid and where they are located in terms of urban densities and access to employment and services. In addition to summarizing mechanisms of change (barriers and drivers), the paper reviews a set of policies that could bring carbon emissions in the building sector in 2025 back almost to 2004 levels. By mid-century, the combination of green buildings and smart growth could deliver the deeper reductions that many believe are needed to mitigate climate change.

  16. Funding Opportunity Webinar- Buildings University Innovators and Leaders Development (BUILD)

    Broader source: Energy.gov [DOE]

    This webinar provides an overview of the “Buildings University Innovators and Leaders Development (BUILD)” Funding Opportunity Announcement, DE-FOA-0001167. The webinar was originally presented on November 19, 2014.

  17. City of Bloomington- Green Building Requirements for Municipal Buildings

    Broader source: Energy.gov [DOE]

    In March 2009, the City of Bloomington passed an ordinance establishing the Green Buildings Program. It requires that all new construction and major renovations of city buildings be built to...

  18. Santa Clara County- Green Building Policy for County Government Buildings

    Broader source: Energy.gov [DOE]

    In February 2006, the Santa Clara County Board of Supervisors approved a Green Building Policy for all county-owned or leased buildings. The standards were revised again in September 2009.

  19. New York City- Green Building Requirements for Municipal Buildings

    Broader source: Energy.gov [DOE]

    In 2005 New York City passed a law (Local Law No. 86) making a variety of green building and energy efficiency requirements for municipal buildings and other projects funded with money from the...

  20. Building America Webinar: Building America Technology-to-Market...

    Broader source: Energy.gov (indexed) [DOE]

    7, 2015 3:00PM to 4:30PM EDT This free webinar will introduce the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America's...

  1. Revisit of Energy Use and Technologies of High Performance Buildings

    E-Print Network [OSTI]

    Li Ph.D., Cheng

    2014-01-01T23:59:59.000Z

    Energy performance of LEED for new construction buildings:New Buildings Institute.New Buildings Institute. 2013. Buildings database, http://

  2. The Recycling Center at UAB opened March 2, 2009! It is located at 620 11th

    E-Print Network [OSTI]

    Bedwell, David M.

    The Recycling Center at UAB opened March 2, 2009! It is located at 620 11th St. South. See map on the next UAB workday. UAB RECYCLING CENTER LAUNCHES DRIVE-THRU DROP-OFF SERVICE UAB RECYCLING CENTER 620 11 Paolone UAB Recycling Coordinator (205) 996-9043 GENERAL INSTRUCTIONS Please bring separated materials

  3. Deactivation of Building 7602

    SciTech Connect (OSTI)

    Yook, H.R.; Barnett, J.R.; Collins, T.L. [and others

    1995-10-01T23:59:59.000Z

    The Department of Energy (DOE) has sponsored research and development programs in Building 7602 at Oak Ridge National Laboratory (ORNL) since 1984. This work focused on development of advanced technology for processing nuclear fuels. Building 7602 was used for engineering-scale tests using depleted and natural uranium to simulate the nuclear fuel. In April 1994 the DOE Office of Nuclear Energy (NE) sent supplemental FY 1994 guidance to ORNL stating that in FY 1995 and beyond, Building 7602 is considered surplus to NE programs and missions and shall be shut down (deactivated) and maintained in a radiologically and industrially safe condition with minimal surveillance and maintenance (S&M). DOE-NE subsequently provided FY 1995 funding to support the deactivation activities. Deactivation of Building 7602 was initiated on October 1, 1994. The principal activity during the first quarter of FY 1995 was removal of process materials (chemicals and uranium) from the systems. The process systems were operated to achieve chemical solution concentrations needed for reuse or disposal of the solutions prior to removal of the materials from the systems. During this phase of deactivation the process materials processed and removed were: (1) Uranyl nitrate solution 30,178 L containing 4490 kg of uranium; (2) Nitric acid (neutralized) 9850 L containing less than 0.013 kg of uranium; (3) Organic solution 3346 L containing 265 kg of uranium; (4) Uranium oxide powder 95 kg; and (5) Miscellaneous chemicals. At the end of December 1994, the process systems and control systems were shut down and deactivated. Disposition of the process materials removed from the process systems in Building 7602 proved to be the most difficult part of the deactivation. An operational stand down and funding reductions at Y-12 prevented planned conversion of the uranyl nitrate solution to depleted uranium oxide powder. This led to disposal of the uranyl nitrate solution as waste.

  4. Hotbox Test R-value Database and the Building Envelopes Program (BEP)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Building Envelopes Program at Oak Ridge National Laboratory (ORNL) is a program within the Buildings Technology Center (BTC), the premier U.S. research facility devoted to developing technologies that improve the energy efficiency and environmental compatibility of residential and commercial buildings. Our program is divided into two parts: building envelope research, which focuses on the structural elements that enclose a building (walls, roofs and foundations), and materials research, which concentrates on the materials within the envelope systems (such as insulation). The building envelope provides the thermal barrier between the indoor and outdoor environment, and its elements are the key determinants of a building's energy requirements that result from the climate where it is located. [copied from http://www.ornl.gov/sci/roofs+walls/

  5. Framework for Building Design Recyclability

    E-Print Network [OSTI]

    Zhang, Fan

    2008-01-01T23:59:59.000Z

    Recycling of building materials is an important aspect of sustainable construction, while sustainable construction is a critical issue to fulfill overall sustainable development. Researchers have proved that building materials recycling...

  6. Riverside County- Sustainable Building Policy

    Broader source: Energy.gov [DOE]

    In February 2009, the County of Riverside Board of Supervisors adopted Policy Number H-29, creating the Sustainable Building Policy. The Policy requires that all new county building projects...

  7. Nevada Energy Code for Buildings

    Broader source: Energy.gov [DOE]

    ''Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  8. Broward County- Green Building Policy

    Broader source: Energy.gov [DOE]

    In October 2008, Board of County Commissioners of Broward County passed a resolution creating the County Green Building Policy. All new County-owned and operated buildings must achieve a minimum...

  9. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01T23:59:59.000Z

    HVAC consumes more electricity in September, the daily trendsHVAC Equipment Figure 44 Building 2 typical weekday electricity consumption trendHVAC Equipment Figure 45 Building 2 typical weekend electricity consumption trend

  10. Local Option- Green Building Incentives

    Broader source: Energy.gov [DOE]

    To encourage sustainable building practices, North Carolina law allows all counties and cities to provide reductions or partial rebates for building permit fees. To qualify for a fee reduction,...

  11. LAB #6 The Swaying Building

    E-Print Network [OSTI]

    2007-02-21T23:59:59.000Z

    differential equations that model the swaying of a building. Let y(t) be a measure of how far the building is bent- the displacement (in meters) of the top of the ...

  12. Energy Standards for State Buildings

    Broader source: Energy.gov [DOE]

    The State is still required by statute to adopt planning and construction standards for state buildings that conserve energy and optimize the energy performance of new buildings. The standards mu...

  13. Commercial Building Codes and Standards

    Broader source: Energy.gov [DOE]

    Once an energy-efficient technology or practice is widely available in the market, it can become the baseline of performance through building energy codes and equipment standards. The Building...

  14. Building Commissioning in the USA 

    E-Print Network [OSTI]

    Castro, N.; Friedman, H.

    2006-01-01T23:59:59.000Z

    Building Commissioning in the USA Natascha Castro, Annex 47- US Team Leader National Institute of Standards and Technology Hannah Friedman, Cost-Benefit Subtask Leader Portland Energy Conservation, Inc. Asian Pacific Conference on Building...

  15. Maps and inverse maps in open quantum dynamics

    E-Print Network [OSTI]

    Thomas F. Jordan

    2008-07-08T23:59:59.000Z

    Two kinds of maps that describe evolution of states of a subsystem coming from dynamics described by a unitary operator for a larger system, maps defined for fixed mean values and maps defined for fixed correlations, are found to be quite different for the same unitary dynamics in the same situation in the larger system. An affine form is used for both kinds of maps to find necessary and sufficient conditions for inverse maps. All the different maps with the same homogeneous part in their affine forms have inverses if and only if the homogeneous part does. Some of these maps are completely positive; others are not, but the homogeneous part is always completely positive. The conditions for an inverse are the same for maps that are not completely positive as for maps that are. For maps defined for fixed mean values, the homogeneous part depends only on the unitary operator for the dynamics of the larger system, not on any state or mean values or correlations. Necessary and sufficient conditions for an inverse are stated several different ways: in terms of the maps of matrices, basis matrices, density matrices, or mean values. The inverse maps are generally not tied to the dynamics the way the maps forward are. A trace-preserving completely positive map that is unital can not have an inverse that is obtained from any dynamics described by any unitary operator for any states of a larger system.

  16. Development of Building Automation and Control Systems

    E-Print Network [OSTI]

    Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

    2012-01-01T23:59:59.000Z

    A design flow for building automation and control systems,’’Development of Building Automation and Control Systems Yangdesign of the build- ing automation system (including the

  17. Energy Department Issues Green Building Certification System...

    Office of Environmental Management (EM)

    Issues Green Building Certification System Final Rule to Support Increased Energy Measurement and Efficient Building Design Energy Department Issues Green Building Certification...

  18. Revealing myths about people, energy and buildings

    E-Print Network [OSTI]

    Diamond, R.

    2011-01-01T23:59:59.000Z

    Myths about People, Energy and Buildings Rick Diamond andmyths about people, energy and buildings are current today?myths about people, energy and buildings? Who tells these

  19. Retrofit Ventilation Strategies in Multifamily Buildings Webinar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retrofit Ventilation Strategies in Multifamily Buildings Webinar Retrofit Ventilation Strategies in Multifamily Buildings Webinar Slides from the Building America webinar on...

  20. Sustainable Buildings and Infrastructure | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sustainable Buildings Implementation Plan DOE Sustainable Buildings and Campuses USGBC Roadmap to Sustainable Government Buildings DOE Greening Federal Facilities, Resource Guide...

  1. Southeast Energy Efficiency Alliance's Building Energy Codes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Southeast Energy Efficiency Alliance's Building Energy Codes Project Southeast Energy Efficiency Alliance's Building Energy Codes Project Building Codes Project for the 2013...

  2. Building Energy Data Exchange Specification Scoping Report |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Energy Data Exchange Specification Scoping Report Building Energy Data Exchange Specification Scoping Report The Building Energy Data Exchange Specification (BEDES),...

  3. Energy Sciences Building | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Video Argonne's Energy Sciences Building Energy Sciences Building The Energy Sciences Building is a world-class scientific facility and a shining example of sustainable design....

  4. Special announcement: Building 9731 shines again

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Special announcement: Building 9731 shines again Over the past several weeks, concentrated activity in and around Building 9731, the first building completed at Y-12 and the...

  5. Smart Buildings: Business Case and Action Plan

    E-Print Network [OSTI]

    Ehrlich, Paul

    2009-01-01T23:59:59.000Z

    from Smart Building strategies: Improved energy efficiencySmart Buildings benefits fall into three categories: Improved energy efficiency1. Achieve Energy Efficiency Mandates. Use Smart Building

  6. commercial buildings initiative | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commercial Buildings Initiative The DOE Building Technologies Office works with the commercial building industry to accelerate the use of energy efficiency technologies in both...

  7. Green Libraries Are More Than Just Buildings

    E-Print Network [OSTI]

    Aulisio, George J.

    2013-01-01T23:59:59.000Z

    France: UNESCO. U.S. Green Building Council (USGBC). (internationally recognized green building program. Retrievednecessarily entail a green building, but it does involve a

  8. NREL: Buildings Research - Webinar Rescheduled: Material Handling...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    attend this webinar. Printable Version Buildings Research Home Commercial Buildings Residential Buildings Facilities Working with Us Publications News Did you find what you...

  9. Building Energy Information Systems: User Case Studies

    E-Print Network [OSTI]

    Granderson, Jessica

    2010-01-01T23:59:59.000Z

    energy and building automation systems. Lilburn, GA:providers' use of building automation systems (BAS), orweb- based building control and automation systems and their

  10. Model Predictive Control for Energy Efficient Buildings

    E-Print Network [OSTI]

    Ma, Yudong

    2012-01-01T23:59:59.000Z

    more sophisticated building automation systems and buildingthrough the building automation system “Automated Logic Websystem. ALC is a building automation system, offering a user

  11. Smart Buildings: Business Case and Action Plan

    E-Print Network [OSTI]

    Ehrlich, Paul

    2009-01-01T23:59:59.000Z

    and typical building automation systems. A key element ofsystem and building automation systems for HVAC systemnetwork for Building Automation System (BAS) data. GSA is

  12. Development of Building Automation and Control Systems

    E-Print Network [OSTI]

    Yang, Yang; Zhu, Qi; Maasoumy, Mehdi; Sangiovanni-Vincentelli, Alberto

    2012-01-01T23:59:59.000Z

    design flow for building automation systems that focuses onflow for building automation and control systems,’’ in Proc.Development of Building Automation and Control Systems Yang

  13. Commercial Buildings Integration | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    types of commercial buildings. Read more DOE Invests 6 Million to Support Commercial Building Efficiency DOE Invests 6 Million to Support Commercial Building Efficiency These...

  14. Rating the energy performance of buildings

    E-Print Network [OSTI]

    Olofsson, Thomas; Meier, Alan; Lamberts, Roberto

    2004-01-01T23:59:59.000Z

    Energy and Sustainable Buildings, 2004 Available at http://Energy and Sustainable Buildings, Vol. 3, (2004), Olofsson,for a commercial office building in Melbourne, Australia,

  15. Occupant satisfaction in mixed-mode buildings.

    E-Print Network [OSTI]

    Brager, Gail; Baker, Lindsay

    2008-01-01T23:59:59.000Z

    Strategies for Mixed-Mode Buildings, Summary Report, CenterCBE). 2006. Website: Mixed-Mode Building Case Studies.Department of Environmental Building Research Establishment

  16. Tobacco Policy in Municipal Buildings, 2001

    E-Print Network [OSTI]

    Department of Population Health Sciences Center for Health Policy and Program Evaluation,

    2002-01-01T23:59:59.000Z

    WINNEBAGO County Banned in all buildings Cities County WOODCounty Banned in all buildings WOOD Cities MENASHA NEENAHBanned in some but not all buildings County ARPIN AUBURNDALE

  17. Automated Continuous Commissioning of Commercial Buildings

    E-Print Network [OSTI]

    Bailey, Trevor

    2013-01-01T23:59:59.000Z

    P. “Real Time Model-based Energy Diagnostics in Buildings. ”Proc. Building Simulation ’11, Sydney, Australia, Novemberhttp://www.eere.energy.gov/buildings/energyplus/. 7. http://

  18. Occupant satisfaction in mixed-mode buildings

    E-Print Network [OSTI]

    Brager, Gail; Baker, Lindsay

    2009-01-01T23:59:59.000Z

    Environmental Quality in Green Buildings”. Indoor Air; 14 (Strategies for Mixed-Mode Buildings, Summary Report, CenterCBE). 2006. Website: Mixed-Mode Building Case Studies.

  19. Strategies for Demand Response in Commercial Buildings

    E-Print Network [OSTI]

    Watson, David S.; Kiliccote, Sila; Motegi, Naoya; Piette, Mary Ann

    2006-01-01T23:59:59.000Z

    Strategies for Demand Response in Commercial Buildings DavidStrategies for Demand Response in Commercial Buildings Davidadjusted for demand response in commercial buildings. The

  20. This paper has been downloaded from the Building and Environmental Thermal Systems Research Group at Oklahoma State University (http://www.hvac.okstate.edu).

    E-Print Network [OSTI]

    This paper has been downloaded from the Building and Environmental Thermal Systems Research Group that is typically only the case for envelope-dominated buildings in a given location. · Reasonably constant ground thermal properties between locations for which the rule-of-thumb would be applied. The main example

  1. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01T23:59:59.000Z

    cooling, and lighting using passive systems, and optimal building design strategies to realize that potential. ASSESSMENT OF PROGRESS-

  2. Hawaii-Okinawa Building Evaluations

    SciTech Connect (OSTI)

    Metzger, I.; Salasovich, J.

    2013-05-01T23:59:59.000Z

    NREL conducted energy evaluations at the Itoman City Hall building in Itoman, Okinawa Prefecture, Japan, and the Hawaii State Capitol building in Honolulu, Hawaii. This report summarizes the findings from the evaluations, including the best practices identified at each site and opportunities for improving energy efficiency and renewable energy. The findings from this evaluation are intended to inform energy efficient building design, energy efficiency technology, and management protocols for buildings in subtropical climates.

  3. Commercial Building Funding Opportunity Webinar

    Broader source: Energy.gov [DOE]

    This webinar provide an overview of the Commercial Building Technology Demonstrations Funding Opportunity Announcement DE-FOA-0001084.

  4. Connected Buildings Interoperability Vision Webinar

    Broader source: Energy.gov [DOE]

    Connected Buildings Interoperability Vision Webinar slides, by Kevin Lynn, U.S. Department of Energy, May 20, 2015.

  5. Farm Buildings Pocketbook in Metric 

    E-Print Network [OSTI]

    Anonymous

    1971-01-01T23:59:59.000Z

    Some useful advice giving standards, dimensions and data in metric for those interested in the design of farm buildings

  6. May 28, 2009 Smart Buildings

    E-Print Network [OSTI]

    May 28, 2009 Smart Buildings: Business Case and Action Plan Paul Ehrlich1 and Rick Diamond2 1 of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. #12;Smart Buildings: Business Case Contract No. DE-AC02-05CH11231. GSA Smart Buildings Report Page ii April 8, 2009 #12;Acknowledgements

  7. Buildings Events | Department of Energy

    Energy Savers [EERE]

    Webinar: Building America Technology-to-Market Roadmaps 3:00PM to 4:30PM EDT Zero Energy Buildings: What are they and how do we build them? 3:00PM to 4:00PM EDT Residential Energy...

  8. 2008 BUILDING ENERGY EFFICIENCY STANDARDS

    E-Print Network [OSTI]

    2008 BUILDING ENERGY EFFICIENCY STANDARDS C A L I F O R N I A E N E RGY CO M M I S S I O N Buildings and Appliances Office #12;Acknowledgments The Building Energy Efficiency Standards (Standards and consultants. Valerie Hall, Deputy Director of the Energy Efficiency and Renewable Division provided policy

  9. Going for "Green" Sustainable Building

    E-Print Network [OSTI]

    Going for "Green" Sustainable Building Certification Statistics Europe Status May 2011 rics.org/sustainability #12;Sustainable Building Certification Statistics Europe Foreword Investors are increasingly the usefulness of sustainability certificates in mainstreaming the uptake of so-called `green' buildings across

  10. BUILDING STRONGSM 2008 AFEP Preliminary

    E-Print Network [OSTI]

    BUILDING STRONGSM 1 2008 AFEP Preliminary Research Results Northwest Power and Conservation Council Meeting March 2009 Boise, ID #12;BUILDING STRONGSM 2 Focus Today · Anadromous Fish Evaluation Program Purpose · Juvenile Fish Passage · Adult Fish · Predation ­ Avian ­ Pinniped · Lamprey #12;BUILDING

  11. Introduction to Green Building & LEED

    E-Print Network [OSTI]

    Zaferatos, Nicholas C.

    Introduction to Green Building & LEED Alistair Jackson Principal O'Brien & Company alistair ­ Green Building Standard · MLS Listing Service #12;#12;#12;#12;#12;#12;#12;#12 of existing infrastructure and provides a foundation for high performance green buildings · Integrated

  12. Data Preparation Process for the Buildings Performance Database

    SciTech Connect (OSTI)

    Walter, Travis; Dunn, Laurel; Mercado, Andrea; Brown, Richard E.; Mathew, Paul

    2014-06-30T23:59:59.000Z

    The Buildings Performance Database (BPD) includes empirically measured data from a variety of data sources with varying degrees of data quality and data availability. The purpose of the data preparation process is to maintain data quality within the database and to ensure that all database entries have sufficient data for meaningful analysis and for the database API. Data preparation is a systematic process of mapping data into the Building Energy Data Exchange Specification (BEDES), cleansing data using a set of criteria and rules of thumb, and deriving values such as energy totals and dominant asset types. The data preparation process takes the most amount of effort and time therefore most of the cleansing process has been automated. The process also needs to adapt as more data is contributed to the BPD and as building technologies over time. The data preparation process is an essential step between data contributed by providers and data published to the public in the BPD.

  13. Site Map - Pantex Plant

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclearHomelandMultivariateSite Map Main Menu About the ALSSite Map

  14. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy ManufacturingMapping the NanoscaleMapping

  15. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy ManufacturingMapping theMapping the

  16. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electronEnergy ManufacturingMapping theMapping

  17. Mapping the Nanoscale Landscape

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |IsLove Your Home and It'llMapping Particle Charges inMapping

  18. SUSY GUT Model Building

    E-Print Network [OSTI]

    Stuart Raby

    2008-08-27T23:59:59.000Z

    I discuss an evolution of SUSY GUT model building, starting with the construction of 4d GUTs, to orbifold GUTs and finally to orbifold GUTs within the heterotic string. This evolution is an attempt to obtain realistic string models, perhaps relevant for the LHC. This review is in memory of the sudden loss of Julius Wess, a leader in the field, who will be sorely missed.

  19. Anomaly for Model Building

    E-Print Network [OSTI]

    Utpal Sarkar

    2006-06-19T23:59:59.000Z

    A simple algorithm to calculate the group theory factor entering in anomalies at four and six dimensions for SU(N) and SO(N) groups in terms of the Casimir invariants of their subgroups is presented. Explicit examples of some of the lower dimensional representations of $SU(n), n \\leq 5$ and SO(10) groups are presented, which could be used for model building in four and six dimensions.

  20. Buildings of the Future

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) and the Pacific Northwest National Laboratory are developing a vision for future buildings—at least one hundred years from today—based on the collective views of thought leaders. As part of this effort, we will explore technology and demographic trends that could revolutionize the built environment across energy, water, environment, resilient design, health, security, and productivity.