National Library of Energy BETA

Sample records for manufacturing office amo

  1. Request for Information (RFI): Advanced Manufacturing Office (AMO) Software

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tools | Department of Energy Advanced Manufacturing Office (AMO) Software Tools Request for Information (RFI): Advanced Manufacturing Office (AMO) Software Tools July 25, 2014 - 1:00pm Addthis Funding: This RFI is not a Funding Opportunity Announcement (FOA); therefore, EERE is not accepting applications at this time. Open Date: 07/25/2014 Close Date: 09/30/2014 Funding Organization: The Advanced Manufacturing Office of the Office of Energy Efficiency and Renewable Energy Funding Number:

  2. AMO Requests Technical Topics Suitable for a Manufacturing Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovation Institute AMO Requests Technical Topics Suitable for a Manufacturing Innovation Institute April 17, 2014 - 12:23pm Addthis The Advanced Manufacturing Office...

  3. AMO Requests Technical Topics Suitable for a Manufacturing Innovation Institute

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) seeks information on mid-Technology Readiness Level (TRL) research and development (R&D) needs, market challenges, supply chain challenges, and shared facility needs to address challenges associated with clean energy manufacturing.

  4. Stay informed with current announcements from the Advanced Manufacturing Office (AMO).

    Broader source: Energy.gov [DOE]

    Lawrence Livermore National Laboratory Leads DOE’s New HPC for Manufacturing Program Lawrence Livermore National Laboratory (LLNL) is collaborating with Lawrence Berkeley and Oak Ridge National Laboratories (LBNL and ORNL) to lead a new US Department of Energy (DOE) program designed to fund and foster public-private R&D projects that enhance US competitiveness in clean energy manufacturing. The High Performance Computing for Manufacturing Program (HPC4Mfg) was announced by David Danielson, DOE assistant secretary for Energy Efficiency and Renewable Energy, during the third annual American Energy and Manufacturing Competitiveness Summit (AEMC).

  5. AMO's New Institute Focused on Wide Bandgap Power Electronics Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy AMO's New Institute Focused on Wide Bandgap Power Electronics Manufacturing AMO's New Institute Focused on Wide Bandgap Power Electronics Manufacturing January 15, 2014 - 11:34am Addthis The Next Generation Power Electronics National Manufacturing Institute announced by President Obama today will use $70 million provided by the U.S. Department of Energy's Advanced Manufacturing Office to support and manage its programs over the next five years. This Institute is one of

  6. Veterans and Others Can Apply for an AMO-sponsored Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Internship | Department of Energy Veterans and Others Can Apply for an AMO-sponsored Advanced Manufacturing Internship Veterans and Others Can Apply for an AMO-sponsored Advanced Manufacturing Internship August 15, 2014 - 3:18pm Addthis Applications are being accepted for the new Advanced Manufacturing Internship program starting today. Pellissippi State Community College in Knoxville, TN, developed the curriculum for Veterans with funding from the Advanced Manufacturing Office (AMO). The

  7. AMO Industry Day Workshop on Upcoming Smart Manufacturing FOA

    Office of Energy Efficiency and Renewable Energy (EERE)

    AMO will host an Industry Day workshop to explain the concept, vision, and technology needs associated with support for a Clean Energy Manufacturing Innovation Institute on Smart Manufacturing.

  8. AMO Hosted Workshop on Composite Manufacturing

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Advanced Manufacturing Office will host a workshop on Fiber Reinforced Polymer Composite Manufacturing on January 13, 2014 at the Hilton Crystal City in Arlington, VA.

  9. Save the Date: DOE EERE AMO Workshop to Discuss Manufacturing Process Intensification Innovation Topic

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) is planning to have a workshop in Arlington, VA at the Hilton Alexandria Old Town on 29 – 30 September, 2015. This 2 day workshop will focus on the on the...

  10. AMO to Issue FOA for New Innovation Institute on Smart Manufacturing |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy to Issue FOA for New Innovation Institute on Smart Manufacturing AMO to Issue FOA for New Innovation Institute on Smart Manufacturing December 11, 2014 - 4:06pm Addthis The Advanced Manufacturing Office posted a Notice of Intent (NOI) entitled "Clean Energy Manufacturing Innovation Institute on Smart Manufacturing: Advanced Sensors, Controls, Platforms and Modeling for Manufacturing." President Obama today announced that the Energy Department will lead this

  11. Advanced Manufacturing Office FY 2017 Budget At-A-Glance

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) brings together manufacturers, research institutions, suppliers, and universities to investigate manufacturing processes, information, and materials technologies critical to advance domestic manufacturing of clean energy products, and to support energy productivity across the entire manufacturing sector.

  12. AMO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AMO - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear Energy

  13. Advanced Manufacturing Office Update January 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Update January 2016 Advanced Manufacturing Office Update January 2016 February 2, 2016 - 4:36pm Addthis In this Issue Partner Spotlight AMO Technology Advances Wind Turbine Research Hilton Joins Superior Energy Performance Partners AMO Success Stories Innovators Find a Home with Cyclotron Road Manufacturing Industry's Role in Grid Modernization The Future of Robotics Scholars IACMI Announces Summer Internship Program A Message from the Director Johnson_280x210.jpg Dear friends of AMO, The

  14. Advanced Manufacturing Office News

    SciTech Connect (OSTI)

    2013-08-08

    News stories about advanced manufacturing, events, and office accomplishments. Subscribe to receive updates.

  15. AMO News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    News AMO News RSS May 13, 2016 AMO News Notice of Intent to Issue Funding for Clean Energy Manufacturing Innovation Institute Funding Number: DE-FOA-0001594 Funding Amount: $70,000,000 The Office of Energy Efficiency and Renewable Energy (EERE) intends to issue, on behalf of the Advanced Manufacturing Office (AMO), a Funding Opportunity Announcement (FOA) entitled "Clean Energy Manufacturing Innovation Institute for Reducing EMbodied-energy And Decreasing Emissions (REMADE) in Materials

  16. AMO Industry Day Workshop, February 25th, Targets Smart Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The workshop will take place on Wednesday, February 25, 2015 at the Georgia Tech Global Learning Center, Atlanta, GA. AMO Industry Day will provide a valuable opportunity for ...

  17. AMO Industry Day Workshop, February 25th, Targets Smart Manufacturing FOA |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Industry Day Workshop, February 25th, Targets Smart Manufacturing FOA AMO Industry Day Workshop, February 25th, Targets Smart Manufacturing FOA February 12, 2015 - 3:40pm Addthis AMO will host an Industry Day workshop to explain the concept, vision, and technology needs associated with support for a Clean Energy Manufacturing Innovation Institute on Smart Manufacturing. The workshop will take place on Wednesday, February 25, 2015 at the Georgia Tech Global Learning

  18. Innovative Manufacturing Initiative Recognition Day, Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office (AMO) | Department of Energy Day, Advanced Manufacturing Office (AMO) Innovative Manufacturing Initiative Recognition Day, Advanced Manufacturing Office (AMO) PDF icon imi_recogitionday_leo_june2012.pdf More Documents & Publications Innovative Manufacturing Initiative Recognition Day Advanced Manufacturing Office Overview Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry

  19. Contacts for the Advanced Manufacturing Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contacts for the Advanced Manufacturing Office Contacts for the Advanced Manufacturing Office Welcome to the Advanced Manufacturing Office (AMO). Our address, email, and phone number are provided below. U.S. Department of Energy - Advanced Manufacturing Office (formerly Industrial Technologies Program) Room 5F-065, MS EE-5A 1000 Independence Ave, SW Washington, DC 20585 Phone: (202) 586-9488 Nearest Metro stop: Smithsonian (blue/orange line) Get directions Website Contact: Send us your comments,

  20. AMO Issues Request for Information on Clean Energy Manufacturing Topics, Including Fuel Cell and Hydrogen Applications

    Broader source: Energy.gov [DOE]

    The AMO seeks information on mid-Technology Readiness Level R&D needs, market challenges, supply chain challenges, and shared facility needs addressing clean energy manufacturing topics, including the fuel cell and hydrogen sectors.

  1. Advanced Manufacturing Office FY14 Budget At-a-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ADVANCED MANUFACTURING OFFICE FY14 BUDGET AT-A-GLANCE The Advanced Manufacturing Office (AMO) partners with industry, small business, regional entities, and other stakeholders to identify and invest in emerging advanced manufacturing and clean energy technologies, provide energy-related leadership in the national and interagency Advanced Manufacturing Partnership through targeted manufacturing Institutes, and encourage a culture of continuous improvement in corporate energy management to

  2. Advanced Manufacturing Office Update, September 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 2014 Advanced Manufacturing Office Update, September 2014 September 18, 2014 - 4:34pm Addthis In This Issue Featured Article Veterans Receive Valuable Advanced Manufacturing Training under AMO-Sponsored Internship Partners in the Spotlight Iowa Water and Wastewater Operators Seek SEP Certification in New Pilot Program Darigold Steps Up to the Better Plants Challenge Velocys Advances Small-Scale Gas-to-Liquid Technology with AMO Support HARBEC's $52,000 Annual Energy Savings under SEP

  3. AMO Program Peer Review

    Broader source: Energy.gov [DOE]

    DOE's Advanced Manufacturing Office (AMO) will be conducting a Peer Review of its Research and Development (R&D), Facilities, and Technology Assistance activities in Washington, DC, on May 6-7, 2014. Presentations will be given on individual R&D projects, Facilities, and the Technical Assistance activities. Leading technology experts from the industrial and academic sectors will review AMO's Program and provide their view on its effectiveness and impact.

  4. Save the Date: DOE EERE AMO Workshop to Discuss Manufacturing...

    Broader source: Energy.gov (indexed) [DOE]

    parties on how to develop smaller, simpler equipment and step-change improvements in manufacturing processes. These improved processes will have fewer steps and be capable of...

  5. AMO's New Institute for Advanced Composites Manufacturing Innovation...

    Broader source: Energy.gov (indexed) [DOE]

    the National Network for Manufacturing Innovation (NNMI). The Institute will focus on lowering the cost of advanced fiber-reinforced polymer composite materials by 50 percent, ...

  6. Advanced Manufacturing Office FY 2015 Budget At-A-Glance | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 5 Budget At-A-Glance Advanced Manufacturing Office FY 2015 Budget At-A-Glance The Advanced Manufacturing Office (AMO) partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality U.S. manufacturing jobs, enhance global competitiveness, and reduce energy use by encouraging a culture of continuous improvement in corporate energy management. PDF icon fy15_at-a-glance_amo.pdf More

  7. Advanced Manufacturing Office FY 2016 Budget At-A-Glance | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 6 Budget At-A-Glance Advanced Manufacturing Office FY 2016 Budget At-A-Glance The Advanced Manufacturing Office (AMO) partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality manufacturing jobs, enhance the global competitiveness of the United States, and reduce energy use by encouraging a culture of continuous enrichment in corporate energy management. PDF icon AMO FY 2016

  8. Letter from the AMO Director on the AMO Peer Review, May 6-7, 2014 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Letter from the AMO Director on the AMO Peer Review, May 6-7, 2014 Letter from the AMO Director on the AMO Peer Review, May 6-7, 2014 Dear Stakeholders, In May 2014, the Advanced Manufacturing Office (AMO) conducted a review of our technology research, development, and demonstration (RD&D) projects. Periodic peer reviews are required by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) to enhance program planning. Over the course

  9. AMO Weekly Announcements 5/19 | Department of Energy

    Office of Environmental Management (EM)

    AMO Events AMO Events Below you will find information on the Advanced Manufacturing Office's upcoming events, sessions, and webinars. EVENT: 2016 DOE ADVANCED MANUFACTURING OFFICE PEER REVIEW - JUNE 14-15, 2016 June 14, 2016 8:00AM to 5:00PM EDT Advanced Manufacturing Home Key Activities Research & Development Projects Facilities Technical Assistance

    News AMO News RSS May 20, 2016 From left to right: Moderator Ramola Musante, panelists Ron Voglewede, Bill Varley, Rob Ivester, and S.

  10. Advanced Manufacturing Office (Formerly Industrial Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Office (Formerly Industrial Technologies Program) Advanced Manufacturing Office (Formerly Industrial Technologies Program) Presented at the NREL Hydrogen and Fuel ...

  11. ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DECEMBER 2-3, 2015 | Department of Energy ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP DECEMBER 2-3, 2015 ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP DECEMBER 2-3, 2015 PDF icon Draft Agenda More Documents & Publications WORKSHOP: SUSTAINABILITY IN MANUFACTURING AGENDA AND OVERVIEW WORKSHOP: HIGH VALUE ROLL TO ROLL (HV R2R) MANUFACTURING INNOVATION, DECEMBER 2-3, 2015 2015 AMO Peer Review Agenda

  12. Advanced Manufacturing Office Update, March 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 2015 Advanced Manufacturing Office Update, March 2015 March 30, 2015 - 3:13pm Addthis In This Issue Featured Articles Better Plants Welcomes New Partners from Diverse Sectors Better Plants Challenge Partners Share Energy-Saving Solutions Harbec Receives 2014 Environmental Excellence Award from New York State AMO and Industry News Heat Exchange Materials Research Advances Accomplishments Highlighted at Critical Materials Institute Annual Peer Review Benefits of Combined Heat and Power

  13. Advanced Manufacturing Office (Formerly Industrial Technologies Program) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Manufacturing Office (Formerly Industrial Technologies Program) Advanced Manufacturing Office (Formerly Industrial Technologies Program) Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011. PDF icon DOE's Advanced Manufacturing Office More Documents & Publications Innovative Manufacturing Initiative Recognition Day Manufacturing Demonstration Facilities Workshop Agenda, March 2012 Advanced Manufacturing

  14. Advanced Materials Manufacturing (AMM) Session

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Office (AMO) manufacturing.energy.gov 2 WELCOME & THANK YOU from your friendly support staff: Eric Miller, David Forrest, Fred Crowson, Jessica Savell... ...

  15. Advanced Manufacturing Office in DOE Multimaterial Joining Workshop

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    domestic manufacturing jobs and enhance the global competitiveness of the United States. ... and Universities Private sector Gap "Valley of Death" Primary AMO Focus DOE ...

  16. Advanced Manufacturing Office, U.S. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    domestic manufacturing jobs and enhance the global competitiveness of the United States. ... and Universities Private sector Gap "Valley of Death" Primary AMO Focus Primary ...

  17. Advanced Manufacturing Office Overview | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office Overview Advanced Manufacturing Office Overview PDF icon mw_rf_workshop_july2012.pdf More Documents & Publications Microwave and Radio Frequency Workshop Manufacturing Demonstration Facility Workshop Microwave (MW) and Radio Frequency (RF) as Enabling Technologies for Advanced Manufacturing

  18. AMO PEER REVIEW, MAY 28-29, 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AMO PEER REVIEW, MAY 28-29, 2015 AMO PEER REVIEW, MAY 28-29, 2015 The Advanced Manufacturing Office (AMO) conducted a Peer Review of its Research, Development, and Demonstration (RD&D), Facilities, and Analysis activities in Washington, DC, on May 28-29, 2015. The meeting was open to the public. Leading technology experts from the industrial, academic and government sectors reviewed AMO's Program and provided their view on its effectiveness and impact. The Peer Review was held concurrently

  19. advanced manufacturing office | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Manufacturing Office The U.S. Department of Energy (DOE) funds the research, development, and demonstration of highly efficient and innovative manufacturing technologies....

  20. AMO Weekly Announcements 3/21 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 AMO Weekly Announcements 3/21 March 21, 2016 - 11:33am Addthis Energy Department's High Performance Computing for Manufacturing Program Seeks to Fund New Industry Proposals The Department of Energy (DOE) with support from the Advanced Manufacturing Office (AMO) is seeking concept proposals from qualified U.S. manufacturers to participate in short-term, collaborative projects. DOE is expected to choose another 8-10 projects and will receive up to approximately $3 million. Selectees will be

  1. Advanced Manufacturing Office: Smart Manufacturing Industry Day...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Smart Manufacturing is a network data-driven process that combines innovative automation ... Smart Manufacturing is a network data-driven process that combines innovative automation ...

  2. Webtrends Archives by Fiscal Year - Advanced Manufacturing Office...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Office Webtrends Archives by Fiscal Year - Advanced Manufacturing Office From the EERE Web Statistics Archive: Advanced Manufacturing Office, Webtrends ...

  3. AMO Weekly Announcements 11/5/15 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5/15 AMO Weekly Announcements 11/5/15 November 5, 2015 - 11:00am Addthis AMO Technology Manager Leads Education Discussion at CAMX Kelly Visconti, a technology manager with the Department of Energy's (DOE) Advanced Manufacturing Office, led an educational session at The Composites and Advanced Materials Expo (CAMX) last month in Dallas, TX. She spoke on the topic of "Lightweight Composites for Clean Energy." Read a recent article published by Composite Manufacturing Magazine on

  4. AMO Weekly Announcements 2/25 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2/25 AMO Weekly Announcements 2/25 February 25, 2016 - 11:25am Addthis Notice of Intent To Issue A Funding Opportunity For Next Generation Of Electric Machines The Office of Energy Efficiency and Renewable Energy (EERE) intends to issue, on behalf of the Advanced Manufacturing Office (AMO), a Funding Opportunity Announcement (FOA) entitled "Next Generation of Electric Machines: Enabling Technologies." With a funding amount of $25 million, this FOA targets the development of key

  5. AMO Weekly Announcements 11/18/15

    Broader source: Energy.gov [DOE]

    AMO Partner ORNL Wins Big at R&D 100 Awards Researchers at the Department of Energy's Oak Ridge National Laboratory received six R&D 100 awards at last week's ceremony sponsored by R&D Magazine. Two of the projects, The Big Area Additive Manufacturing-CI system (BAAM-CI) and Genoa 3D Printing Simulation Software, were funded by the Department of Energy's Advanced Manufacturing Office (AMO) in partnership with ORNL. BAAM-CI also received an Editor's Choice award from R&D Magazine.

  6. AMO Weekly Announcements 12/2/2015

    Broader source: Energy.gov [DOE]

    WEBINAR: Sustained Energy Savings Achieved Through Successful Industrial Customer Interaction with Ratepayer Programs - December 10 Sandy Glatt with the U.S. Department of Energy's Advanced Manufacturing Office (AMO) will present a summary of a recent SEE Action publication titled "Sustained Energy Savings Achieved Through Successful Industrial Customer Interaction with Ratepayer Programs: Case Studies".

  7. AMO Peer Review, May 6-7, 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AMO Peer Review, May 6-7, 2014 AMO Peer Review, May 6-7, 2014 The Advanced Manufacturing Office (AMO) conducted a review of its portfolio of Research and Development (R&D), Facilities, and Technology Assistance projects and activities in Washington, D.C. on May 6-7, 2014. The meeting was open to the public. Leading technology experts from the industrial and academic sectors reviewed AMO's R&D portfolio. View the agenda. Read the Letter from the AMO Director. The presentations provided at

  8. Advanced Manufacturing Office Small Business Innovation Research...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Office Small Business Innovation Research Small Business Technology ... in thermal and degradation resistance, high-performance, and lower-cost for energy systems. ...

  9. Advanced Manufacturing Office | Department of Energy

    Energy Savers [EERE]

    Advanced Manufacturing Office ISO 50001SEP Pilot Program - Applications Due 182016 ISO 50001SEP Pilot Program - Applications Due 182016 The U.S. DOE invites applications for...

  10. DOE's AMO Releases Workshop "Save the Date" and New RFI on Composite

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing | Department of Energy DOE's AMO Releases Workshop "Save the Date" and New RFI on Composite Manufacturing DOE's AMO Releases Workshop "Save the Date" and New RFI on Composite Manufacturing December 11, 2013 - 12:00am Addthis The U.S. Department of Energy's (DOE) Advanced Manufacturing Office (AMO) plans to host a workshop on January 13, 2014 in the Washington, D.C. area on Fiber Reinforced Polymer (FRP) Composite Manufacturing. Low cost, lightweight, high

  11. Manufacturing Energy and Carbon Footprint References

    Broader source: Energy.gov (indexed) [DOE]

    References AMO (Advanced Manufacturing Office), EERE (Energy Efficiency and Renewable Energy). 2012. Consider Installing High-Pressure Boilers with Backpressure Turbine-Generators. ...

  12. Veterans and Others Can Apply for an AMO-sponsored Advanced Manufactur...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applications are being accepted for the new Advanced Manufacturing Internship program starting today. Pellissippi State Community College in Knoxville, TN, developed the curriculum ...

  13. Office of Energy Efficiency & Renewable Energy Advanced Manufacturing Office

    Energy Savers [EERE]

    Office of Energy Efficiency & Renewable Energy Advanced Manufacturing Office Quadrennial Technology Review (QTR): Technology Assessment - Sustainable Manufacturing/Flow of Materials Through Industry Joe Cresko - joe.cresko@ee.doe.gov Sustainable Manufacturing Workshop Portland, OR January 6, 2016 2 Quadrennial Technology Review-2015 hOp://www.energy.gov/quadrennial-technology-review-2015 The QTR is a comprehensive assessment of science and energy technology R&D opportuniHes to address

  14. RFI Seeks Feedback on Third-party Maintenance Strategy for AMO's Software

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tools | Department of Energy RFI Seeks Feedback on Third-party Maintenance Strategy for AMO's Software Tools RFI Seeks Feedback on Third-party Maintenance Strategy for AMO's Software Tools July 28, 2014 - 12:19pm Addthis The Advanced Manufacturing Office (AMO) would like to understand the market opportunities for enhancing and expanding certain industrial system software tools and related assets (including training curriculum and written technical resources). Currently, these tools and

  15. Advanced Manufacturing Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Office NOTICE OF INTENT: Clean Energy Manufacturing Innovation Institute for Reducing Energy of Materials And Decreasing Emissions in M NOTICE OF INTENT: Clean Energy Manufacturing Innovation Institute for Reducing Energy of Materials And Decreasing Emissions in M The Energy Department intends to issue a Funding Opportunity Announcement for approximately $70 million entitled "Clean Energy Manufacturing Innovation Institute for Reducing EMbodied-energy And Decreasing

  16. advanced manufacturing office | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Manufacturing Office The U.S. Department of Energy (DOE) funds the research, development, and demonstration of highly efficient and innovative manufacturing technologies. DOE has supported the development of more than 250 energy-saving industrial technologies that have been commercialized since 1976. DOE is also working to create a network of Manufacturing Innovation Institutes, each of which will create collaborative communities to target a unique technology in advanced manufacturing.

  17. Manufacturing Innovation Topics Workshop

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) and the Office of the Secretary of Defense Manufacturing Technology Program (OSD ManTech) will host a workshop to discuss AMO's recent Request for Information (RFI) on Clean Energy Manufacturing Topic Areas as well as the recent areas of interest announced by OSD ManTech for a new Manufacturing Innovation Institute on October 8-9, 2014 in Fort Worth, TX.

  18. AMO Weekly Announcements 3/11 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3/11 AMO Weekly Announcements 3/11 March 11, 2016 - 11:16am Addthis Department of Energy (DOE) Announces $25 Million to Advance Next Generation of Electric Machines for Enabling Technologies The DOE with support of the Advanced Manufacturing Office (AMO) has announced up to $25 million in funding to help advance technologies for energy efficient electric machines through applied research and development. The DOE plans to choose eight to twelve projects through this funding opportunity and

  19. Advanced Manufacturing Office Peer Review Final Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ADVANCED MANUFACTURING OFFICE PEER REVIEW MAY 28-29, 2015 ... Difficult Materials LLC 10:10 - 10:30 am Coatings and Process Development Reduced PPG Industries, Inc. Energy Automotive ...

  20. 2015 AMO Peer Review Agenda | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon 2015 AMO Peer Review Agenda More Documents & Publications 2014 AMO Peer Review Agenda Smart Manufacturing Institute Industry Day Workshop Proceedings Innovative ...

  1. Webtrends Archives by Fiscal Year - Advanced Manufacturing Office |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Advanced Manufacturing Office Webtrends Archives by Fiscal Year - Advanced Manufacturing Office From the EERE Web Statistics Archive: Advanced Manufacturing Office, Webtrends archives by fiscal year. Microsoft Office document icon Advanced Manufacturing FY09 Microsoft Office document icon Advanced Manufacturing FY10 Microsoft Office document icon Advanced Manufacturing FY11 More Documents & Publications Webtrends Archives by Fiscal Year - Publication Library

  2. AMO Weekly Announcements 11/16/15 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6/15 AMO Weekly Announcements 11/16/15 November 16, 2015 - 10:00am Addthis WORKSHOP: High Value Roll to Roll Manufacturing Innovation The Advanced Manufacturing Office (AMO) will host a workshop at the Westin Alexandria on December 2-3, 2015. This 2-day workshop will focus on the topic of High Value Roll to Roll (HV R2R) Manufacturing Innovation. Categories for discussion include Advanced Deposition Processing and Printing, Unique Metrology and Quality Systems, and Continuous Processing/Process

  3. Advanced Manufacturing Office Update, July 2015 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... of technologies, measures and case studies on best practice energy efficiency projects. ... Facilities AMO Facilities are collaborative communities that provide participants with ...

  4. AMO Program Overview | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program Overview AMO Program Overview PDF icon tuesday_webcast_for_industry_october2012.pdf PDF icon webcast_2009-0528_arra_and_itp.pdf PDF icon webcast_2009-0115_introtoitp.pdf PDF icon webcast_2009-0108_chp.pdf More Documents & Publications Webtrends Archives by Fiscal Year - Advanced Manufacturing Office User Experience Research Templates and Examples: Card Sorting Industrial Distributed Energy: Combined Heat & Power

  5. Explore Careers in Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Explore Careers in Manufacturing The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous improvement in corporate energy management to bring about a transformation in U.S. manufacturing. The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous improvement in corporate energy management to bring about a

  6. Advanced Manufacturing Office Update, January 2015

    Office of Energy Efficiency and Renewable Energy (EERE)

    Welcome Message Happy New Year! 2014 was a wonderful year for AMO. I was pleased to reconnect with old friends and meet new colleagues at organizations in D.C., West Virginia, and South Carolina, among others.

  7. Weekly Announcements from the Advanced Manufacturing Office, March 2, 2016

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Weekly Announcements from the Advanced Manufacturing Office, March 2, 2016 Weekly Announcements from the Advanced Manufacturing Office, March 2, 2016 March 3, 2016 - 9:42am Addthis From the Office of Energy Efficiency and Renewable Energy's Advanced Manufacturing Office Advanced Manufacturing Office Funded Cyclotron Road Program Announces Second Cohort of Innovators The Cyclotron Road program through Lawrence Berkeley National Laboratory, has announced the selection of

  8. Fuel Cell Technologies Office American Energy and Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    eere.energy.gov Fuel Cell Technologies Office American Energy & Manufacturing Competitiveness Partnership http:www.aemcsummit.compete.org Fuel Cell Manufacturing Dr. Sunita ...

  9. EVENT: 2016 DOE ADVANCED MANUFACTURING OFFICE PEER REVIEW - JUNE...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EVENT: 2016 DOE ADVANCED MANUFACTURING OFFICE PEER REVIEW - JUNE 14-15, 2016 EVENT: 2016 DOE ADVANCED MANUFACTURING OFFICE PEER REVIEW - JUNE 14-15, 2016 June 14, 2016 8:00AM to ...

  10. Attend AMO Program Peer Review May 6 and 7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AMO Program Peer Review May 6 and 7 Attend AMO Program Peer Review May 6 and 7 April 28, 2014 - 1:09pm Addthis DOE's Advanced Manufacturing Office (AMO) will be conducting a Peer Review of its Research and Development (R&D), Facilities, and Technology Assistance activities in Washington, DC, on May 6-7, 2014. You are cordially invited to attend and invite others. Presentations will be given on individual R&D projects, Facilities, and the Technical Assistance activities. Leading

  11. WORKSHOP: SUSTAINABILITY IN MANUFACTURING, JANUARY 6-7

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) held a workshop in Portland, Oregon on January 6-7, 2016. The topic of this 2 day workshop was Sustainable Manufacturing. This workshop included discussions...

  12. WORKSHOP: SUSTAINABILITY IN MANUFACTURING, JANUARY 6-7

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) is planning to host a workshop in Portland, Oregon on January 6-7, 2016. The topic of this 2 day workshop is Sustainable Manufacturing.

  13. AMO Announces Funding Opportunity for Low-Cost, Energy Efficient Manufacturing and Recycling of Advanced Fiber-Reinforced Polymer Composites

    Broader source: Energy.gov [DOE]

    A new Advanced Composite Manufacturing Institute, one of six National Network for Manufacturing Innovation Institutes to launch in 2014, will receive up to $70 million over five years in Energy Department funding.

  14. AMO's New Institute Focused on Wide Bandgap Power Electronics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Focused on Wide Bandgap Power Electronics Manufacturing AMO's New Institute Focused on Wide Bandgap Power Electronics Manufacturing January 15, 2014 - 11:34am Addthis The Next ...

  15. Office\tof\tEnergy\tEfficiency\t&\tRenewable\tEnergy Advanced\tManufacturing...

    Office of Environmental Management (EM)

    Office of Energy Efficiency & Renewable Energy Advanced Manufacturing Office Quadrennial Technology Review (QTR): Technology Assessment - Sustainable ManufacturingFlow of ...

  16. DOE - Office of Legacy Management -- Manufacturing Laboratories...

    Office of Legacy Management (LM)

    Manufacturing Laboratories Inc - MA 0-04 FUSRAP Considered Sites Site: MANUFACTURING LABORATORIES, INC. (MA.0-04 ) Eliminated from further consideration under FUSRAP Designated...

  17. AMO Weekly Announcement Archive | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Weekly Announcement Archive AMO Weekly Announcement Archive AMO Weekly Announcements 5/11 WEBINAR: Modular Chemical Process Intensification Institute for Clean Energy Manufacturing Today at 3pm EST The Department will conduct an informational webinar on May 11, 2016 at 3:00pm EDT. This webinar will provide an opportunity to learn more about the program and current solicitation, and ask questions regarding funding opportunity announcement procedures. AMO Weekly Announcements 5/4 Energy Department

  18. AMO Weekly Announcements 3/25

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office Releases the “Combined Heat and Power (CHP) Technical Potential in the United States” Study The Department of Energy’s (DOE) Advanced Manufacturing Office (AMO) has released the “Combined Heat and Power (CHP) Technical Potential in the United States” market analysis report. This study provides data on the technical potential in industrial facilities and commercial buildings for “topping cycle” CHP, waste heat to power CHP (WHP CHP), and district energy CHP in the U.S. The report provides valuable data on the technical potential for CHP in strategic energy planning and energy efficiency program design. The study shows that within the U.S. there is estimated to be more than 240GW of technical potential at over 291,000 sites. Data is provided nationally by CHP system size range, facility type, and state.

  19. Adv. Simulation for Additive Manufacturing: 11/2014 Wkshp. Report for U.S. DOE/EERE/AMO

    SciTech Connect (OSTI)

    Turner, John A.; Babu, Sudarsanam Suresh; Blue, Craig A.

    2015-07-01

    The overarching question for the workshop was as following: How do we best utilize advanced modeling and high-performance computing (HPC) to address key challenges and opportunities in order to realize the full potential of additive manufacturing; and what are the key challenges of additive manufacturing to which modeling and simulation can contribute solutions, and what will it take to meet these challenges?

  20. U.S. Advanced Manufacturing and Clean Energy Technology Challenges

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Advanced Manufacturing and Clean Energy Technology Challenges May 6, 2014 AMO Peer Review Mark Johnson Director Advanced Manufacturing Office www.manufacturing.energy.gov This presentation does not contain any proprietary, confidential, or otherwise restricted information. 2 Outline * Big Picture on Manufacturing in US * Focus on Advanced Manufacturing * AMO Organization * Technical Assistance * R&D Facilities * R&D Projects * Goals for Meeting 3 Products invented here, now made

  1. Advanced Manufacturing Office and Potential Technologies for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    sustainability is improved in the making, use, and full lifecycle of the product made. ... Manufacturing Policy & DOE's Role * DOE ... End & What are the Metrics for This ...

  2. Advanced Manufacturing Office FY 2015 Budget At-A-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. manufacturing jobs, enhance global competitiveness, and reduce energy use by encouraging a culture of continuous improvement in corporate energy management. What We Do The Advanced Manufacturing Office uses an integrated approach that relies on three pillars to deliver energy and consumer cost savings:  Next Generation Manufacturing R&D Projects will focus on the development of industry-specific and cross- cutting manufacturing technologies to dramatically improve U.S. transition

  3. Advanced Manufacturing Office FY 2016 Budget At-A-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    manufacturing jobs, enhance the global competitiveness of the United States, and reduce energy use by encouraging a culture of continuous enrichment in corporate energy management. What We Do The Advanced Manufacturing Office uses an integrated approach that relies on three pillars to deliver energy and consumer cost savings:  Next Generation Manufacturing Research and Development (R&D) Projects will target the development of application-specific and crosscutting manufacturing

  4. Advanced Manufacturing Office At-A-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to support 40 gigawatts of new, cost-effective combined heat and power (CHP) by 2020, and helps individual manufacturers reduce their energy intensity by 25%, over 10 years. ...

  5. References and Appendices: U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis, November 2012

    Energy Savers [EERE]

    4 U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis REFERENCES AMO (Advanced Manufacturing Office), EERE (Energy Efficiency and Renewable Energy). 2012a. Consider Installing High-Pressure Boilers with Backpressure Turbine-Generators. U.S. Department of Energy. http://www1.eere.energy.gov/manufacturing/tech_deployment/pdfs/steam22_backpressure.pdf AMO (Advanced Manufacturing Office), EERE (Energy Efficiency and Renewable Energy). 2012b. Improving Steam System Performance: A

  6. AMO Director Mark Johnson Moderates Panel at American Energy...

    Office of Environmental Management (EM)

    Director Mark Johnson Moderates Panel at American Energy & Manufacturing Competitiveness (AEMC) Northeast Regional Summit AMO Director Mark Johnson Moderates Panel at American ...

  7. Advanced Manufacturing Office Update, January 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    January 2015 Advanced Manufacturing Office Update, January 2015 January 26, 2015 - 2:00pm Addthis In This Issue Featured Articles Expert Panel Releases Final Report on Strengthening Advanced Manufacturing in America 3D Printed Shelby Cobra Demonstrates Further Advances in Additive Manufacturing Partners in the Spotlight Legrand Energy Marathon Leads to Big Savings Better Plants Welcomes First Five Wastewater Treatment Partners Third Volvo Facility Certified to Superior Energy Performance Honda

  8. Selected Activities of the Office of Energy Efficiency and Renewable Energy's Advanced Manufacturing Office

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AUDIT REPORT Selected Activities of the Office of Energy Efficiency and Renewable Energy's Advanced Manufacturing Office OAS-RA-14-04 June 2014 U.S. Department of Energy Office of Inspector General Office of Audits and Inspections Department of Energy Washington, DC 20585 June 17, 2014 MEMORANDUM FOR THE ASSISTANT SECRETARY FOR ENERGY EFFICIENCY AND RENEWABLE ENERGY FROM: Rickey R. Hass Deputy Inspector General for Audits and Inspections Office of Inspector General SUBJECT: INFORMATION: Audit

  9. WORKSHOP: SUSTAINABILITY IN MANUFACTURING, JANUARY 6-7 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    January 6, 2016 8:00AM EST to January 7, 2016 4:00PM EST The Advanced Manufacturing Office (AMO) is planning to host a workshop in Portland, Oregon on January 6-7, 2016. The topic...

  10. AMO Weekly Announcements 2/5/16 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2/5/16 AMO Weekly Announcements 2/5/16 February 5, 2016 - 4:26pm Addthis AMO and Wind Program Team Up to Advance Wind Blade Manufacturing AMO, Wind Program, Oak Ridge National Laboratory (ORNL), Sandia National Laboratories (SNL), and other organizations are working together to identify and develop solutions to reduce costs and time associated with manufacturing wind turbines, experiment with new capabilities, and improve design flexibility. This includes the development of a new, more efficient

  11. Advanced Materials Manufacturing and Innovative Technologies for Natural Gas Pipeline Systems and Components

    Energy Savers [EERE]

    Energy 5 Budget At-A-Glance Advanced Manufacturing Office FY 2015 Budget At-A-Glance The Advanced Manufacturing Office (AMO) partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality U.S. manufacturing jobs, enhance global competitiveness, and reduce energy use by encouraging a culture of continuous improvement in corporate energy management. PDF icon fy15_at-a-glance_amo.pdf More

  12. Working with U.S. Manufacturers to Succeed in Global Markets (Poster)

    SciTech Connect (OSTI)

    Not Available

    2012-06-01

    Poster created for the Advanced Manufacturing Office to be used at meetings, presentations, and exhibits. The Advanced Manufacturing Office (AMO) fosters advanced manufacturing innovation, facilitates public and private partnerships, and drives rapid deployment of technologies to help manufacturers: Save energy and money, Reduce environmental impacts, Enhance workforce development, and Improve national energy security and competitiveness throughout the supply chain.

  13. LCLS AMO web page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atomic, Molecular and Optical Science at the LCLS Links: AMO LCLS SLAC LUSI Proposal Preparation Workshop: A workshop will be held June 2 & 3 at SLAC to assist users in preparing proposals to use the AMO instrument at the LCLS in anticipation of the first call for proposals due September 2008. The LCLS will begin user operations with the AMO instrument in August 2009. Information about the LCLS and the AMO instrument will be presented at the proposal preparation workshop to help users

  14. Advanced Manufacturing Office Update, November 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 2014 Advanced Manufacturing Office Update, November 2014 November 13, 2014 - 12:00pm Addthis In This Issue Featured Articles Better Plants Partners Celebrated at National Conference World's First 3D Printed Car Shows Additive Manufacturing Has Come of Age Partners in the Spotlight Schneider Electric Achieves Superior Energy Performance at Five Facilities O'Fallon Casting, Oshkosh Corporation, Oregon Freeze Dry, and Richmond Industries Join Better Plants Holcim (US) Inc. Steps up to the

  15. Advanced Manufacturing Office FY14 Budget At-a-Glance | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Advanced Manufacturing Office FY14 Budget At-a-Glance Advanced Manufacturing Office FY14 Budget At-a-Glance Advanced Manufacturing Office FY14 Budget At-a-Glance, a publication of the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy. PDF icon manufacturing_ataglance_2014.pdf More Documents & Publications Advanced Manufacturing Office FY 2017 Budget At-A-Glance Advanced Manufacturing Office FY 2016 Budget At-A-Glance Advanced Manufacturing Office FY 2015

  16. Agenda: Fiber Reinforced Polymer Composite Manufacturing Workshop

    Energy Savers [EERE]

    Advanced Manufacturing Office (AMO) manufacturing.energy.gov 3 Morning Agenda 9:00am - 9:05am Welcome Mark Johnson Director, Advanced Manufacturing Office 9:05am - 9:20am Clean Energy Manufacturing Initiative David Danielson Assistant Secretary Energy Efficiency and Renewable Energy 9:20am - 9:50am Advanced Manufacturing Office Overview and Review of RFI Results Mark Johnson Director, Advanced Manufacturing Office 9:50am - 10:30am Panel Discussion: DOE Perspectives Mark Shuart, Advanced

  17. Welcome! Presentation: Fiber Reinforced Polymer Composite Manufacturing Workshop

    Energy Savers [EERE]

    5 | Energy Efficiency and Renewable Energy eere.energy.gov Mark Johnson Director Advanced Manufacturing Office manufacturing.energy.gov Breakout Instructions January 13, 2014 Advanced Manufacturing Office (AMO) manufacturing.energy.gov 6 Breakout Objectives Let's dig deeper: * Manufacturing Process Technologies - Blue Teams A and B (e.g. lay-up techniques, out of the autoclave, novel cure techniques, resin infusion, pultrusion, SMC, tooling, machining) * Enabling Technologies and Approaches -

  18. Dispatchable Distributed Generation: Manufacturing's Role in Support of

    Broader source: Energy.gov (indexed) [DOE]

    Grid Modernization, FEBRUARY 10-11 | Department of Energy Advanced Manufacturing Office (AMO) held a workshop in Austin, Texas at the Embassy Suites Hotels on February 10-11, 2016. The topic of this 2 day workshop was the Role of the Manufacturing Sector in Grid Modernization. This workshop included discussions on the technological barriers of grid modernization in the industrial sector. Through this workshop, AMO aims to work with industry leaders to address barriers in an attempt to

  19. ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP DECEMBER 2-3, 2015 ADVANCED MANUFACTURING OFFICE HIGH VALUE ROLL TO ROLL (HV R2R) WORKSHOP DECEMBER 2-3, ...

  20. Manufacturing Innovation Multi-Topic Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovation Multi-Topic Workshop Manufacturing Innovation Multi-Topic Workshop DOE's Advanced Manufacturing Office (AMO) and the Office of Secretary of Defense Manufacturing Technology Program (OSD ManTech) held a joint workshop October 8 and 9, 2014 in Fort Worth, TX. This workshop identified mid-Technology Readiness Level (TRL) research and development (R&D) needs, market and supply chain challenges, and shared facility needs for advanced manufacturing. The workshop complemented a recently

  1. Unlocking the Potential of Additive Manufacturing in the Fuel Cells

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry | Department of Energy Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry Download presentation slides from the DOE Fuel Cell Technologies Office webinar "Additive Manufacturing for Fuel Cells" held on February 11, 2014. PDF icon Additive Manufacturing for Fuel Cells Webinar Slides More Documents & Publications QTR Webinar: Chapter 8 - Industry and Manufacturing AMO

  2. Manufacturing Demonstration Facility

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to develop broad dissemination of additive manufacturing Industry Collaborations * ... 5 DOE-AMO 2015 Peer Review Understanding Additive Manufacturing Mainstream applications ...

  3. Notice of Intent to Issue Funding for Clean Energy Manufacturing Innovation Institute

    Broader source: Energy.gov [DOE]

    Funding Number: DE-FOA-0001594 Funding Amount: $70,000,000 The Office of Energy Efficiency and Renewable Energy (EERE) intends to issue, on behalf of the Advanced Manufacturing Office (AMO), a Funding Opportunity Announcement (FOA) entitled “Clean Energy Manufacturing Innovation Institute for Reducing EMbodied-energy And Decreasing Emissions (REMADE) in Materials Manufacturing”.

  4. DOE - Office of Legacy Management -- American Manufacturing Co...

    Office of Legacy Management (LM)

    Manufacturing Co of Texas - TX 08 FUSRAP Considered Sites Site: American Manufacturing Co of Texas - TX 08 ( TX.08 ) Eliminated from further consideration under FUSRAP Designated ...

  5. DOE - Office of Legacy Management -- Magnus Brass Manufacturing...

    Office of Legacy Management (LM)

    Magnus Brass Manufacturing Co - OH 21 FUSRAP Considered Sites Site: MAGNUS BRASS MANUFACTURING CO. ( OH.21 ) Eliminated from consideration under FUSRAP - Referred to U.S. EPA...

  6. DOE - Office of Legacy Management -- Penn Salt Manufacturing...

    Office of Legacy Management (LM)

    Salt Manufacturing Co Whitemarsh Research Laboratories - PA 20 FUSRAP Considered Sites Site: PENN SALT MANUFACTURING CO., WHITEMARSH RESEARCH LABORATORIES (PA.20) Eliminated from...

  7. DOE - Office of Legacy Management -- W E Pratt Manufacturing...

    Office of Legacy Management (LM)

    E Pratt Manufacturing Co - IL 12 FUSRAP Considered Sites Site: W.E. PRATT MANUFACTURING CO. (IL.12) Eliminated from consideration under FUSRAP Designated Name: Not Designated...

  8. DOE - Office of Legacy Management -- Joslyn Manufacturing Supply...

    Office of Legacy Management (LM)

    Joslyn Manufacturing Supply Co - IN 01 FUSRAP Considered Sites Joslyn Manufacturing & Supply Co., IN Alternate Name(s): Joslyn Stainless Steel Slater Steels Corporation IN.01-2...

  9. DOE - Office of Legacy Management -- R Krasberg and Sons Manufacturing...

    Office of Legacy Management (LM)

    Krasberg and Sons Manufacturing Co - IL 27 FUSRAP Considered Sites Site: R. KRASBERG AND SONS MANUFACTURING CO. (IL.27) Eliminated from consideration under FUSRAP Designated Name:...

  10. DOE - Office of Legacy Management -- Liberty Aircraft Manufacturing...

    Office of Legacy Management (LM)

    Liberty Aircraft Manufacturing Company - 025 FUSRAP Considered Sites Site: Liberty Aircraft Manufacturing Company (025) Designated Name: Alternate Name: Location: Evaluation Year:...

  11. DOE - Office of Legacy Management -- Midwest Manufacturing Co...

    Office of Legacy Management (LM)

    Midwest Manufacturing Co - IL 0-04 FUSRAP Considered Sites Site: MIDWEST MANUFACTURING CO (IL.0-04 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated...

  12. New Request for Information (RFI) on Clean Energy Manufacturing Topic Areas

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) seeks information on mid-Technology Readiness Level (TRL) research and development (R&D) needs, market challenges, supply chain challenges, and shared facility needs for clean energy manufacturing. This new Request for Information (RFI) is a follow-on to a recently completed RFI broadly covering advanced manufacturing. AMO would now like to know more about the challenges associated with advanced manufacturing technology which potentially could be overcome by pre-competitive collaboration as part of a Clean Energy Manufacturing Innovation Institute.

  13. DOE - Office of Legacy Management -- Titanium Alloys Manufacturing Co Div

    Office of Legacy Management (LM)

    of National Lead of Ohio - NY 41 Alloys Manufacturing Co Div of National Lead of Ohio - NY 41 FUSRAP Considered Sites Site: TITANIUM ALLOYS MANUFACTURING CO., DIV. OF NATIONAL LEAD OF OHIO (NY.41) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Titanium Alloy Metals Titanium Alloy Manufacturing Division Titanium Alloy Manufacturing (TAM) Division of National Lead Company The Titanium Pigment Co. NL Industries ICD/Niagara NY.41-1 NY.41-2 NY.41-3

  14. Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE) | Department of Energy Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE) Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE) This document highlights DOE's Office of Energy Efficiency and Renewable Energy's advancements in saving

  15. DOE - Office of Legacy Management -- Titanium Alloys Manufacturing...

    Office of Legacy Management (LM)

    Site: TITANIUM ALLOYS MANUFACTURING CO., DIV. OF NATIONAL LEAD OF OHIO (NY.41) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Titanium ...

  16. Advanced Manufacturing Office: Case Study - The Challenge: Improving...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Company Energy Philosophy: Nisshinbo has a strong commitment in identifying and integrating energy saving measures into its manufacturing process. Nisshinbo California, Inc. ...

  17. EVENT: 2016 DOE ADVANCED MANUFACTURING OFFICE PEER REVIEW - JUNE 14-15,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2016 | Department of Energy EVENT: 2016 DOE ADVANCED MANUFACTURING OFFICE PEER REVIEW - JUNE 14-15, 2016 EVENT: 2016 DOE ADVANCED MANUFACTURING OFFICE PEER REVIEW - JUNE 14-15, 2016 June 14, 2016 8:00AM to 5:00PM EDT The Energy Efficiency and Renewable Energy's Advanced Manufacturing Office will hold a Peer Review of its Research and Development Projects, Research and Development Facilities and Analysis activities at the Key Bridge Marriott in Rosslyn, Virginia on June 14-15, 2016. This

  18. Advanced Manufacturing Office Update, May 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Plants is excited to announce a new Program Partner, Novelis. By joining the program, the company pledges to reduce the energy intensity of U.S. manufacturing operations by ...

  19. DOE - Office of Legacy Management -- Penn Salt Manufacturing Co Whitemarsh

    Office of Legacy Management (LM)

    Research Laboratories - PA 20 Salt Manufacturing Co Whitemarsh Research Laboratories - PA 20 FUSRAP Considered Sites Site: PENN SALT MANUFACTURING CO., WHITEMARSH RESEARCH LABORATORIES (PA.20) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: Penn Salt Company PA.20-1 Location: Philiadelphia , Pennsylvania PA.20-1 Evaluation Year: 1987 PA.20-1 Site Operations: Conducted process studies for recovery of uranium from fluoride scrap. PA.20-1 Site

  20. Google Archives by Fiscal Year — AMO

    Broader source: Energy.gov [DOE]

    From the EERE Web Statistics Archive: Advanced Manufacturing Office, retired Google Analytics profiles for the Advanced Manufacturing subsites FY12 and the Energy Intensive Processes site FY12-FY13.

  1. AMO Director Mark Johnson Moderates Panel at American Energy &

    Office of Environmental Management (EM)

    Manufacturing Competitiveness (AEMC) Northeast Regional Summit | Department of Energy Director Mark Johnson Moderates Panel at American Energy & Manufacturing Competitiveness (AEMC) Northeast Regional Summit AMO Director Mark Johnson Moderates Panel at American Energy & Manufacturing Competitiveness (AEMC) Northeast Regional Summit May 17, 2016 - 1:00pm Addthis From left to right: Moderator Mark Johnson, panelists Dr. Craig Blue, Dean Jones, John Milton-Benoit, Jeffrey Wilcox, and

  2. AMO Test page

    Broader source: Energy.gov [DOE]

    http://www.nrel.gov/docs/fy03osti/31919.pdfhttp://www1.eere.energy.gov/library/pdfs/itp/partnering_for_success.pdfhttp://www.eere.energy.gov/manufacturing/tech_deployment/pdfs/mtrmkt.pdfhttp://www...

  3. NNMI Industry Day: Smart Manufacturing AMO Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Climate Action Plan: Efficiency and Sustainability National Economic Council: ... O&M High Fidelity Modelling X X X Data Architecture & Platform X X X Sensor Development & ...

  4. Attendees: John Cymbalsky, Equipment and Appliance Standards Program Manager, Building Technologies Office,

    Energy Savers [EERE]

    Attend AMO Program Peer Review May 6 and 7 Attend AMO Program Peer Review May 6 and 7 April 28, 2014 - 1:09pm Addthis DOE's Advanced Manufacturing Office (AMO) will be conducting a Peer Review of its Research and Development (R&D), Facilities, and Technology Assistance activities in Washington, DC, on May 6-7, 2014. You are cordially invited to attend and invite others. Presentations will be given on individual R&D projects, Facilities, and the Technical Assistance activities. Leading

  5. AMO Weekly Announcements 10/19/15 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    19/15 AMO Weekly Announcements 10/19/15 October 19, 2015 - 2:00pm Addthis The Institute for Advanced Composites Manufacturing Innovation Signed a Collaboration Agreement with Composite Prototyping Center The Institute for Advanced Composites Manufacturing (IACMI) signed a Memorandum of Understanding with the Composite Prototyping Center (CPC) outlining a collaborative arrangement in which both will work to bring advanced composite materials and technologies to the marketplace. READ MORE Did you

  6. AMO Weekly Announcements 10/29/15 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    29/15 AMO Weekly Announcements 10/29/15 October 29, 2015 - 3:00pm Addthis Smart Manufacturing Concept Papers due Nov 4 The deadline to submit a concept paper for DE-FOA-0001263: Manufacturing Innovation Institute for Smart Manufacturing: Advanced Sensors, Controls, Platforms, and Modeling for Manufacturing is Wednesday, Nov 4th, 2015 at 5:00 ET. Applicants may only submit one Concept Paper and one Full Application for consideration under this FOA. To apply, Applicants must register with and

  7. Vehicle Technologies Office Merit Review 2014: Innovative Manufacturing and Materials for Low-Cost Lithium-Ion Batteries

    Broader source: Energy.gov [DOE]

    Presentation given by Optodot Corporation at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about innovative manufacturing...

  8. Vehicle Technologies Office Merit Review 2015: Innovative Manufacturing and Materials for Low-Cost Lithium-Ion Batteries

    Broader source: Energy.gov [DOE]

    Presentation given by Optodot Corporation at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about innovative manufacturing...

  9. 2015 AMO Peer Review Agenda | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2015 AMO Peer Review Agenda 2015 AMO Peer Review Agenda View the agenda for the AMO peer review held May 28-29, 2015. PDF icon 2015 AMO Peer Review Agenda More Documents &...

  10. AMO Weekly Announcements 4/8 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8 AMO Weekly Announcements 4/8 April 8, 2016 - 4:43pm Addthis FUNDING OPPORTUNITY: Industrial Assessment Centers The U.S. Department of Energy (DOE) announced approximately $35 million in funding, subject to congressional appropriations, to assist small- and medium-sized U.S. manufacturers with increasing their energy efficiency, productivity, sustainability and competitiveness and to help address the shortage of engineering professionals with applied energy-related skills. The Industrial

  11. AMO Weekly Announcements 5/11 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    11 AMO Weekly Announcements 5/11 May 11, 2016 - 11:42am Addthis WEBINAR: Modular Chemical Process Intensification Institute for Clean Energy Manufacturing Today at 3pm EST The Department will conduct an informational webinar on May 11, 2016 at 3:00pm EDT. This webinar will provide an opportunity to learn more about the program and current solicitation, and ask questions regarding funding opportunity announcement procedures. To register for this informational webinar, please click here. 2016

  12. AMO Weekly Announcements 5/4 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 AMO Weekly Announcements 5/4 May 4, 2016 - 11:42am Addthis Energy Department Announces New Funding for National Labs to Partner with Industry to Strengthen Clean Energy Manufacturing Competitiveness Assistant Secretary for Energy Efficiency and Renewable Energy Dr. David Danielson today announced the second round of funding for the Energy Department's Technologist in Residence (TIR) program. At its core, the new program aims to strengthen lab- industry relationships to support industry needs

  13. AMO News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Composite Manufacturing Institute, one of six National Network for Manufacturing Innovation Institutes to launch in 2014, will receive up to 70 million over five years in...

  14. Office of Energy Efficiency and Renewable Energy Fiscal Year...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Buildings AMO FEMP Vehicles Biomass Fuel Cells Clean Energy Manufacturing Initiative ... * Protection and restoration * Systems optimization * Data management and communications * ...

  15. Resources at the State and Regional Level for Manufacturers ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resources at the State and Regional Level for Manufacturers Manufacturers can use resources delivered by industrial energy efficiency programs in their area. AMO's cost-shared ...

  16. 2014 AMO Peer Review Agenda | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 AMO Peer Review Agenda 2014 AMO Peer Review Agenda View the agenda for the AMO peer review held May 6-7, 2014. View the peer review presentations. PDF icon 2014 AMO Peer Review Agenda More Documents & Publications 2015 AMO Peer Review Agenda Water Power Program Peer Review Meeting Agenda Fuel Cell Projects Kickoff Meeting

  17. Vehicle Technologies Office Merit Review 2015: Giga Life Cycle: Manufacture of Cells from Recycled EV Li-ion Batteries

    Broader source: Energy.gov [DOE]

    Presentation given by OnTo Technology at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about Giga Life Cycle: manufacture...

  18. Additive Manufacturing for Fuel Cells

    Broader source: Energy.gov [DOE]

    Blake Marshall, AMO's lead for Additive Manufacturing Technologies, will provide an overview of current R&D activities in additive manufacturing and its application to fuel cell prototyping and...

  19. AMO Weekly Announcements 3/31

    Broader source: Energy.gov [DOE]

    Advanced Manufacturing Office Director, Mark Johnson and other DOE Leaders Engage Students During EERE Day at MIT The Massachusetts Institute of Technology (MIT) held a university event encouraging MIT students and faculty to learn about energy issues aligned with the Department of Energy’s Energy Efficiency and Renewable Energy (EERE) Office’s mission and research. The event entitled “EERE Day at MIT” featured a keynote presentation by Dr. David Danielson and panel discussions with Advanced Manufacturing Office Director, Dr. Mark Johnson as well as other DOE leaders. Dr. Johnson touched on the topics of clean energy and manufacturing while stressing the importance of cross-cutting initiatives and technologies to achieve the maximum impact for U.S.

  20. AMO News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    research and development arm of AstraZeneca, is the first biotech research laboratory and clinical trial manufacturer to earn certification to SEP. October 24, 2014 Advanced Waste...

  1. Manufacturing Institutes Exhibit American Innovation at Hannover Messe

    Broader source: Energy.gov [DOE]

    The 70th annual Hannover Messe, the world’s largest industrial fair, kicked off this week in Germany. Hannover Messe is one of the largest conferences in the world and drives conversation about innovation and issues affecting industry worldwide. The United States is the official Partner Country joining Germany to host the event this year, and we’re excited that the Department of Energy’s (DOE) Advanced Manufacturing Office (AMO) is getting in on the action.

  2. Advanced Manufacturing for a U.S. Clean Energy Economy (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-03-01

    This fact sheet is an overview of the U.S. Department of Energy's Advanced Manufacturing Office. Manufacturing is central to our economy, culture, and history. The industrial sector produces 11% of U.S. gross domestic product (GDP), employs 12 million people, and generates 57% of U.S. export value. However, U.S. industry consumes about one-third of all energy produced in the United States, and significant cost-effective energy efficiency and advanced manufacturing opportunities remain unexploited. As a critical component of the National Innovation Policy for Advanced Manufacturing, the U.S. Department of Energy's (DOE's) Advanced Manufacturing Office (AMO) is focused on creating a fertile environment for advanced manufacturing innovation, enabling vigorous domestic development of transformative manufacturing technologies, promoting coordinated public and private investment in precompetitive advanced manufacturing technology infrastructure, and facilitating the rapid scale-up and market penetration of advanced manufacturing technologies.

  3. AMO Events | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EVENT: BETTER BUILDINGS SUMMIT, MAY 9-11, 2016 May 9, 2016 9:00AM EDT to May 11, 2016 5:00PM EDT Advanced Manufacturing Home Key Activities Research & Development Projects ...

  4. AMO Events | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EST EVENT: BETTER BUILDINGS SUMMIT, MAY 9-11, 2016 May 9, 2016 9:00AM EDT to May 11, 2016 5:00PM EDT Advanced Manufacturing Home Key Activities Research & Development Projects ...

  5. NOTICE: U.S. Department of Energy (DOE) Portsmouth/Paducah Project Office

    Energy Savers [EERE]

    CENTERS | Department of Energy INTENT TO ISSUE A FUNDING OPPORTUNITY FOR INDUSTRIAL ASSESSMENT CENTERS NOTICE OF INTENT TO ISSUE A FUNDING OPPORTUNITY FOR INDUSTRIAL ASSESSMENT CENTERS March 2, 2016 - 10:58am Addthis Funding Number: DE-FOA-0001513 Funding Amount: $39,900,000 The Office of Energy Efficiency and Renewable Energy (EERE) intends to issue, on behalf of the Advanced Manufacturing Office (AMO), a Funding Opportunity Announcement (FOA) entitled "Industrial Assessment

  6. WORKSHOP: HIGH VALUE ROLL TO ROLL MANUFACTURING INNOVATION, DECEMBER 2-3 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy WORKSHOP: HIGH VALUE ROLL TO ROLL MANUFACTURING INNOVATION, DECEMBER 2-3 WORKSHOP: HIGH VALUE ROLL TO ROLL MANUFACTURING INNOVATION, DECEMBER 2-3 December 2, 2015 8:00AM EST to December 3, 2015 3:30PM EST The Advanced Manufacturing Office (AMO) is planning to host a workshop at the Westin Alexandria on 2-3 December, 2015. This 2-day workshop will focus on the on the advanced manufacturing technology topic of High Value Roll To Roll (HV R2R). Categories for discussion

  7. WORKSHOP: HIGH VALUE ROLL TO ROLL (HV R2R) MANUFACTURING INNOVATION,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DECEMBER 2-3, 2015 | Department of Energy HIGH VALUE ROLL TO ROLL (HV R2R) MANUFACTURING INNOVATION, DECEMBER 2-3, 2015 WORKSHOP: HIGH VALUE ROLL TO ROLL (HV R2R) MANUFACTURING INNOVATION, DECEMBER 2-3, 2015 December 2-3, 2015 in Alexandria, VA. The Advanced Manufacturing Office (AMO) hosted a workshop in Alexandria, VA at the Westin Alexandria Hotel on 2-3 December, 2015. This 2 day workshop focused on the advanced manufacturing technology topic of HV R2R. Discussion topics included

  8. DOE - Office of Legacy Management -- McKinney Tool and Manufacturing...

    Office of Legacy Management (LM)

    McKinney Tool and Manufacturing Co - OH 17 FUSRAP Considered Sites Site: MCKINNEY TOOL & MANUFACTURING CO. ( OH.17 ) Eliminated from further consideration under FUSRAP Designated...

  9. AMO: A Year in Review | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AMO: A Year in Review AMO: A Year in Review December 31, 2015 - 3:00am Addthis AMO: A Year in Review Johnson_280x210.jpg Dear Friends of AMO, As we reflect on past efforts from 2015, I want to thank the entire AMO team of professional staff, technology development and technology assistance performers, external stakeholders and partners for all of your work in 2015. It has been a great year! Your remarkable achievements inspire us to build upon these milestones and reach even higher in 2016. AMO

  10. Manufacturing

    Energy Savers [EERE]

    Than $2 Billion in Energy Costs; Program Expands to Help America's Water Systems | Department of Energy Manufacturers in U.S. Energy Department's Better Plants Program Save More Than $2 Billion in Energy Costs; Program Expands to Help America's Water Systems Manufacturers in U.S. Energy Department's Better Plants Program Save More Than $2 Billion in Energy Costs; Program Expands to Help America's Water Systems September 30, 2015 - 9:03am Addthis NEWS MEDIA CONTACT (202) 586-4940

  11. Request for Information (RFI): Clean Energy Manufacturing Topics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AMO seeks information through this RFI to understand cross-cutting as well as specific manufacturing challenges that if addressed could provide the underlying motivation for the ...

  12. Office of Energy Efficiency and Renewable Energy Fiscal Year 2014 Budget Rollout … Energy Saving Homes, Buildings, and Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Kathleen Hogan, Deputy Assistant Secretary May 1, 2013 Office of Energy Efficiency and Renewable Energy Fiscal Year 2014 Budget Rollout - Energy Saving Homes, Buildings, and Manufacturing 2 EERE's National Mission To create American leadership in the global transition to a clean energy economy 1) High-Impact Research, Development, and Demonstration to Make Clean Energy as Affordable and Convenient as Traditional Forms of Energy 2) Breaking Down Barriers to Market Entry 3 Why Clean Energy Matters

  13. Final Progress Report for the activity called AMO2010 committee

    SciTech Connect (OSTI)

    Donald Shapero; Michael Moloney

    2006-12-31

    The committee was charged to produce a comprehensive report on the status of AMO Science. The committee was charged to produce a report that: 1. Reviewed the field of AMO science, emphasize recent accomplishments, and identify new opportunities and compelling scientific questions; 2. Identified the impact of AMO science on other scientific fields, emerging technologies, and national needs; 3. Identified future workforce, societal and educational needs for AMO science; and 4. Made recommendations on how the US research enterprise might realize the full potential of AMO science. The committee also produced an intermediate report addressing key research issues and themes facing the research community.

  14. AMO Issues Request for Information on Clean Energy Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    subject line "Response to RFI." RFI responses must be received no later than 5:00 p.m. (EDT) on October 3, 2014. This RFI is not a funding opportunity announcement; therefore, DOE ...

  15. AMO Issues Request for Information on Clean Energy Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (R&D) needs, market challenges, supply chain challenges and shared facility needs in ... The AMM topic focuses on accelerating the development of new, high performance ...

  16. AMO's New Institute for Advanced Composites Manufacturing Innovation Will

    Broader source: Energy.gov (indexed) [DOE]

    WHITE HOUSE COUNCIL ON WOMEN AND GIRLS RECENT AGENCY ACCOMPLISHMENTS MARCH 2014 TABLE OF CONTENTS Corporation of National and Community Service Department of Homeland Security Department of Commerce Department of Defense Department of Energy Department of Education Department of Interior Department of Justice Department of Labor Department of State Department of Transportation Department of Treasury Department of Veteran Affairs Environmental Protection Agency Federal Trade Commission General

  17. CHP Deployment Program: AMO Technical Assistance Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CHP Deployment Program: AMO Technical Assistance Overview Claudia Tighe This presentation does not contain any proprietary, confidential, or otherwise restricted information. 2 Combined Heat a Power (CHP): History * First developed by Thomas Edison in 1880s and is one of the world's most common form of energy recycling * Since the '70s CHP used mostly by large industrials (PURPA set the stage) * Today there are hundreds of CHP facilities in the U.S. in both industrial, institutional and

  18. Vehicle Technologies Office Merit Review 2015: Advanced Drying Process for Lower Manufacturing Cost of Electrodes

    Broader source: Energy.gov [DOE]

    Presentation given by Lambda Technologies at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about advanced drying process...

  19. Vehicle Technologies Office Merit Review 2015: Low Cost, Structurally Advanced Novel Electrode and Cell Manufacturing

    Broader source: Energy.gov [DOE]

    Presentation given by 24M Technologies at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about low cost, structurally...

  20. AMO Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Tools AMO Software Tools PDF icon webcast_20111115_better_tools_better_plants.pdf PDF icon webcast_20110712_itp_tools.pdf PDF icon webcast_2009-0611_ind_buildings.pdf PDF icon MotorMaster+ Tool Presentation (March 19, 2009) PDF icon webcast_2009-0312_steam_systems_tool.pdf PDF icon webcast_2009-0305_software_tools.pdf PDF icon QuickPEP Tool Demonstration (February 26, 2009) PDF icon quickpep_webcast_10-30-08.pdf PDF icon software_tools_webcast_10-23-08.pdf More Documents &

  1. Attend a Webinar on AMO's Next Generation Electric Machines Funding

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Opportunity | Department of Energy a Webinar on AMO's Next Generation Electric Machines Funding Opportunity Attend a Webinar on AMO's Next Generation Electric Machines Funding Opportunity March 24, 2015 - 3:09pm Addthis AMO's Next Generation Electric Machines (NGEM) program recently released the Funding Opportunity Announcement (FOA): Next Generation Electric Machines: Megawatt Class Motors. $20 million will fund four to six projects that develop a new generation of energy efficient, high

  2. The Advanced Manufacturing Partnership and the Advanced Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Advanced Manufacturing Partnership and the Advanced Manufacturing National Program Office The Advanced Manufacturing Partnership and the Advanced Manufacturing National Program ...

  3. AMO Weekly Announcements 12/16/2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cooperation and national energy agencies in Canada, Mexico, and the United States. ... Assistance Information Resources Financial Opportunities AMO Contacts News Events

  4. Oak Ridge Manufacturing Demonstration Facility (MDF)

    Broader source: Energy.gov [DOE]

    The Manufacturing Demonstration Facility (MDF) is a collabora­tive manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused on Additive Manufacturing and Low-cost Carbon Fiber.

  5. Low Energy Ion Implantationin Semiconductor Manufacturing | U.S. DOE Office

    Office of Science (SC) Website

    of Science (SC) Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science Applications of Nuclear Science Archives Small Business Innovation Research / Small Business Technology Transfer Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000

  6. Innovative Manufacturing Initiatives Recognition Day Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovative Manufacturing Initiatives Recognition Day June 20, 2012 The Embassy Row Hotel - 2015 Massachusetts Ave, NW 9:00-9:05am Welcome - Dr. Leo Christodoulou, DOE AMO Program...

  7. Innovative Manufacturing Initiative Recognition Day, Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Innovative Manufacturing Initiative Recognition Day Advanced Manufacturing Office Overview Unlocking the Potential of Additive Manufacturing in the ...

  8. AMO Overview: Peer Review 2015 Opening / Welcome

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electro-Chromic Coatings Membranes EV Batteries Multi-Material Joining 6 7 Manufacturing ... Technologies Critical (6) Materials Flow of Material thru Industry Direct Energy ...

  9. AMO Weekly Announcements 12/10/15 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2/10/15 AMO Weekly Announcements 12/10/15 December 10, 2015 - 2:00pm Addthis More AMO Partners Commit to Join the American Business Act on Climate Pledge Last week, the White House announced that 73 companies from across the United States have committed to join the American Business Act on Climate Pledge. Of those companies, eleven are AMO Better Plants program partners. This brings the total to 154 companies that have signed this pledge to demonstrate their support for action on climate change.

  10. AMO Weekly Announcements 12/28/15

    Broader source: Energy.gov [DOE]

    NOTICE OF INTENT: National Network for Manufacturing Innovation (NNMI) Institute Awards Competition The National Institute of Standards and Technology (NIST) intends to announce a competition that will seek applications for new National Network for Manufacturing Innovation (NNMI) Institute awards. The competition for the new NIST funded NNMI Institutes is expected to be announced on Grants.gov in January 2016.

  11. New AMO Consortium Focuses on Energy Efficient and Environmentally Friendly

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials for Cooling | Department of Energy AMO Consortium Focuses on Energy Efficient and Environmentally Friendly Materials for Cooling New AMO Consortium Focuses on Energy Efficient and Environmentally Friendly Materials for Cooling March 8, 2016 - 1:09pm Addthis Dr. Vitalij Pecharsky in his research facility at Ames Laboratory, working with a calorimeter. <em>Photo courtesy of Ames Laboratory. </em> Dr. Vitalij Pecharsky in his research facility at Ames Laboratory, working

  12. EERE - AMO: Better Buildings Summit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EERE - AMO: Better Buildings Summit EERE - AMO: Better Buildings Summit Addthis 1 of 8 Last year, Dr. David Danielson, Assistant Secretary for Energy Efficiency and Renewable Energy, presented a keynote address at a recognition ceremony. Register for the 2016 Summit to learn how to leverage no-cost DOE tools to achieve significant energy savings and explore future opportunities to advance energy efficiency in your organization. 2 of 8 Jay Wrobel, Manager of Technical Assistance at the DOE

  13. AMO Announces Successful Completion of Industrial-Scale Combined Heat,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen, and Power System | Department of Energy Announces Successful Completion of Industrial-Scale Combined Heat, Hydrogen, and Power System AMO Announces Successful Completion of Industrial-Scale Combined Heat, Hydrogen, and Power System May 20, 2015 - 9:00am Addthis Photo Courtesy of FuelCell Energy, Danbury, CT Photo Courtesy of FuelCell Energy, Danbury, CT AMO recently joined with FuelCell Energy of Danbury, CT to celebrate the completion of their successful partnership project at

  14. Bio-Manufacturing: A Strategic clean energy manufacturing opportunity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bio-Manufacturing: A Strategic clean energy manufacturing opportunity Bio-Manufacturing: A ... Volume 1, No.2 NRELDOE EERE QCMetrology Workshop - EERE Fuel Cell Technologies Office ...

  15. Advanced Manufacturing Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... sector Gap "Valley of Death" (Risk Spike) DOE Energy ... capability for the United States * Impactful: Has a ... or products: * Production rate * Processes established * ...

  16. OFFICE,

    Office of Legacy Management (LM)

    OFFICE, . . . . . ..-..__. _ --.-.__.. .-..I............ !..-... bUmME. wArl&l ' rrsldu*. in the dw6lopmQt pmgrwh : Be ostiamts Uuat not man lf+ .b%'o,Q~~~ds. cik'e%ah of the eevenl reel&~ will be require& In : 'ri~ofthehereiabefor6notedeopreodo~ of puriata~tio.aadap :, Iv ve unbntend you vi11 not obj.& to:tha aoe " ai spoh +ant+lea of the mirloua real&es ,, ', ',"" ': ., .,.. i. : /~. ,".. .I,: /, . . ' .* ,; ., ,' ,:.' . .-;. ,-Y .b4 P-0 : ,.

  17. New Request for Information (RFI) on Clean Energy Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The information provided as part of this RFI should assist AMO in understanding the cross-cutting and specific manufacturing challenges as well as the underlying motivation for the ...

  18. U.S. Advanced Manufacturing and Clean Energy Technology Challenges

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Advanced Manufacturing and Clean Energy Technology Challenges May 6, 2014 AMO Peer ... here, now made elsewhere 4 11% of U.S. GDP, 12 million U.S. jobs, 60% of U.S. ...

  19. Sustainable Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Principal Investigator (Presenter): Dr. Troy D. Marusich , CTO Washington, D.C. May 6-7, 2014 Third Wave Systems Inc. U.S. DOE Advanced Manufacturing Office Peer Review Meeting ...

  20. Smart Manufacturing Institute Industry Day Workshop Proceedings

    Broader source: Energy.gov [DOE]

    AMO hosted an Industry Day workshop to explain the concept, vision, and technology needs associated with support for a Clean Energy Manufacturing Innovation Institute on Smart Manufacturing. The workshop was held on February 25, 2015 at the Georgia Tech Hotel & Conference Center in Atlanta, GA.

  1. Innovative Manufacturing Initiative Recognition Day - Final Participant

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Listing | Department of Energy Day - Final Participant Listing Innovative Manufacturing Initiative Recognition Day - Final Participant Listing PDF icon imi_recogitionday_participants.pdf More Documents & Publications Innovative Manufacturing Initiative Recognition Day 2015 AMO Peer Review Agenda CX-100154 Categorical Exclusion Determination

  2. Weekly AMO Announcements 1/13/16 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Weekly AMO Announcements 1/13/16 Weekly AMO Announcements 1/13/16 January 13, 2016 - 2:00pm Addthis Join Secretary Moniz for a Twitter Town Hall - TODAY AT 2pm EST Secretary Moniz will join the White House for Big Block of Cheese Day, a day-long Twitter town hall event inspired by President Andrew Jackson's 1837 open house featuring a 1,400-pound block of cheese. The Energy Secretary will join other Administration officials to answer your climate and energy questions at 2 p.m. ET on January 13.

  3. AMO Weekly Announcements 4/20

    Broader source: Energy.gov [DOE]

    Oak Ridge National Laboratory Sponsored Robotics Team Wins First Place in FIRST Smoky Mountain Regional Competition Fifty high school teams from across the United States recently competed in the Smoky Mountain regional tournament, held March 27-29 in Knoxville. The FIRST Robotics team of Hardin Valley Academy (HVA), located in Knoxville, Tennessee, will now compete against 600 teams at the 2016 FIRST Robotics Championship in St. Louis, Missouri. The HVA team named “RoHAWKtics” is just one of the teams mentored by the DOE’s Manufacturing Demonstration Facility, established at Oak Ridge National Laboratory.

  4. Vehicle Technologies Office Merit Review 2014: Novel Manufacturing Technologies for High Power Induction and Permanent Magnet Electric Motors

    Broader source: Energy.gov [DOE]

    Presentation given by Pacific Northwest National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about novel...

  5. Vehicle Technologies Office Merit Review 2014: Manufacturability Study and Scale-Up for Large Format Lithium Ion Batteries

    Broader source: Energy.gov [DOE]

    Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

  6. Vehicle Technologies Office Merit Review 2015: Novel Manufacturing Technologies for High Power Induction and Permanent Magnet Electric Motors

    Broader source: Energy.gov [DOE]

    Presentation given by Pacific Northwest National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about novel...

  7. RFI Seeks Feedback on Third-party Maintenance Strategy for AMO...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RFI Seeks Feedback on Third-party Maintenance Strategy for AMO's Software Tools RFI Seeks Feedback on Third-party Maintenance Strategy for AMO's Software Tools July 28, 2014 - ...

  8. Manufacturing Demonstration Facility

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ORNL is managed by UT-Battelle for the US Department of Energy Manufacturing Demonstration Facility DOE Advanced Manufacturing Office Merit Review Craig Blue Director, Manufacturing Demonstration Facility Energy and Environmental Sciences Directorate May 6-7, 2014 Washington, DC This presentation does not include proprietary, confidential, or otherwise restricted information. Outline * Manufacturing Demonstration Facility * Impacts with Industry - Metal additive manufacturing - Polymer additive

  9. Research & Evaluation Prototypes (REP) | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research & Development Projects Research & Development Projects Research & Development Projects AMO's R&D projects explore novel energy-efficient, next-generation materials and innovative process technologies for both specific industry sectors and a wider range of manufacturing industries. AMO's R&D projects also pursue foundational or advanced energy technologies for multiple industry sectors. All of AMO's R&D investments have high impact, use project diversity to spread

  10. Vehicle Technologies Office Merit Review 2015: Real-time Metrology for Li-ion Battery R&D and Manufacturing

    Broader source: Energy.gov [DOE]

    Presentation given by Applied Spectra at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about real-time metrology for Li...

  11. Vehicle Technologies Office Merit Review 2014: Real-time Metrology for Li-ion Battery R&D and Manufacturing

    Broader source: Energy.gov [DOE]

    Presentation given by Applied Spectra, Inc at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about real-time metrology for...

  12. The Advanced Manufacturing Partnership and the Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Program Office | Department of Energy The Advanced Manufacturing Partnership and the Advanced Manufacturing National Program Office The Advanced Manufacturing Partnership and the Advanced Manufacturing National Program Office This presentation describes the Advanced Manufacturing Partnership from its beginning as a recommendation of the President's Council of Advisers on Science and Technology to its development and organization. PDF icon The Advanced Manufacturing Partnership and

  13. clean energy manufacturing | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clean Energy Manufacturing Initiative The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the DOE Office of Energy Efficiency & Renewable Energy's (EERE's) clean energy technology offices and Advanced Manufacturing Office, focusing on American competitiveness in clean energy manufacturing. Clean Energy Manufacturing Initiative: http://www1.eere.energy.gov/energymanufacturing

  14. Oak Ridge Manufacturing Demonstration Facility (MDF) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facilities » Oak Ridge Manufacturing Demonstration Facility (MDF) Oak Ridge Manufacturing Demonstration Facility (MDF) The Manufacturing Demonstration Facility (MDF) is a collabora-tive manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused

  15. clean energy manufacturing | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clean Energy Manufacturing Initiative The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the DOE Office of Energy...

  16. AMO Weekly Announcements 4/29 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    29 AMO Weekly Announcements 4/29 April 29, 2016 - 11:42am Addthis The 2016 Better Buildings Summit is Less Than Two Weeks Away, May 9-11 With less than two weeks left until the 2016 Better Buildings Summit, guests and other experts are gearing up to answer your questions on market and energy trends. Participants will have the chance to engage with research and development experts and share their insights for different industrial sectors on new technologies, innovations, and issues that affect

  17. AMO Weekly Announcements 10/8/15 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8/15 AMO Weekly Announcements 10/8/15 October 8, 2015 - 10:00am Addthis Energy Department Awards $6 Million to Universities in TN and VA to Advance Master's and Doctoral Training in Power Electronics The U.S. Department of Energy (DOE) today announced the two universities selected to receive nearly $6 million to establish one or more graduate-level training programs for engineers in power electronics. This effort is part of the Obama Administration's commitment to accelerating American

  18. Manufacturing Demonstration Facility Workshop Videos | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Demonstration Facility Workshop Videos Manufacturing Demonstration Facility Workshop Videos Dr. Leo Christodoulou, Program Manager, EERE Advanced Manufacturing Office, and Mike Molnar, Chief Manufacturing Officer, National Institute of Standards & Technology, speaking at the Manufacturing Demonstration Facility Workshop held in Chicago, Illinois Dr. Leo Christodoulou, Program Manager, EERE Advanced Manufacturing Office speaking at the Manufacturing Demonstration Facility

  19. SEP Benefits to Program Administrators

    Energy Savers [EERE]

    ... Advanced Manufacturing Office (AMO) ADVANCED MANUFACTURING OFFICE 50% Lower Cost Using 75% ... Institute for Advanced Composite Materials Innovation US Manufacturers, Industry Partners, ...

  20. Clean Energy Manufacturing Initiative

    SciTech Connect (OSTI)

    2013-04-01

    The initiative will strategically focus and rally EEREs clean energy technology offices and Advanced Manufacturing Office around the urgent competitive opportunity for the United States to be the leader in the clean energy manufacturing industries and jobs of today and tomorrow.

  1. Manufacturing Energy and Carbon Footprint

    Energy Savers [EERE]

    ORNL is managed by UT-Battelle for the US Department of Energy Manufacturing Demonstration Facility DOE Advanced Manufacturing Office Merit Review Craig Blue Director, Manufacturing Demonstration Facility Energy and Environmental Sciences Directorate May 6-7, 2014 Washington, DC This presentation does not include proprietary, confidential, or otherwise restricted information. Outline * Manufacturing Demonstration Facility * Impacts with Industry - Metal additive manufacturing - Polymer additive

  2. Technology Solutions for New Manufactured Homes, Idaho, Oregon, and Washington Manufactured Home Builders (Fact Sheet), Building America Case Study: Whole-House Solutions for New Homes, Building Technologies Office (BTO)

    Energy Savers [EERE]

    DOE Zero Energy Ready Manufactured Home | Department of Energy Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home Technology Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home The country's first Zero Energy Ready manufactured home that is certified by the U.S. Department of Energy (DOE) is up and running in Russellville, Alabama. PDF icon Southern Energy Homes, First DOE Zero Energy

  3. EERE National Lab Initiatives and Capabilities for Advanced Materials, Manufacturing, and Efficient Building Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AMO Public-Private Partnerships * National Network for Manufacturing Innovation (NNMI) Institutes * Manufacturing Demonstration Facility (MDF) * Critical Materials Institute (CMI) * High Performance Computing for Manufacturing (HPC4M) * Cyclotron Rd 2 3 DOE Manufacturing Innovation Institutes 3 Power America Power Electronics Raleigh, NC IACMI Adv. Composites Knoxville, TN ...and one more topic in 2016 (FY16) Smart Mfg. Smart Manufacturing TBA DOD Managed Institutes MCPI Mfg. Modular Chemical

  4. AMO's Blake Marshall Joins Industry Leaders for Discussion About...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hosted by The American Society Of Mechanical Engineers (ASME) and Public Knowledge, 3DDC ... The Additive Manufacturing Integrated Energy (AMIE) project, a collaborative effort ...

  5. AMO Weekly Announcements 4/14 | Department of Energy

    Office of Environmental Management (EM)

    April 14, 2016 - 4:43pm Addthis NOTICE OF INTENT: Modular Chemical Process Intensification ... "Modular Chemical Process Intensification Institute for Clean Energy Manufacturing." ...

  6. AMO Announces Funding Opportunity for Low-Cost, Energy Efficient...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Advisors on Science and Technology. Report to the President on Capturing Domestic Competitive Advantage in Advanced Manufacturing. Web. July 2012. Addthis Related Articles...

  7. Joint Fuel Cell Technologies and Advanced Manufacturing Webinar

    Broader source: Energy.gov [DOE]

    Presentation slides from the joint Fuel Cell Technologies Office and Advanced Manufacturing Office webinar held November 20, 2012.

  8. Additive Manufacturing Meets the Critical Materials Shortage

    Broader source: Energy.gov [DOE]

    Find out how the Energy Department's Advanced Manufacturing Office is working to address potential shortages of critical materials through additive manufacturing, or 3D printing.

  9. AMO Announces Successful Completion of Industrial-Scale Combined...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Professor Jack Brouwer, Associate Director and Chief Technology Officer of the National Fuel Cell Research Center, points out the tri-generation facility that uses biogas from ...

  10. 1,"John E Amos","Coal","Appalachian Power Co",2900 2,"FirstEnergy...

    U.S. Energy Information Administration (EIA) Indexed Site

    West Virginia" ,"Plant","Primary energy source","Operating company","Net summer capacity (MW)" 1,"John E Amos","Coal","Appalachian Power Co",2900 2,"FirstEnergy Harrison Power ...

  11. AMO FOA Targets Advanced Components for Next-Generation Electric Machines |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy FOA Targets Advanced Components for Next-Generation Electric Machines AMO FOA Targets Advanced Components for Next-Generation Electric Machines March 19, 2015 - 10:21am Addthis AMO's Next Generation Electric Machines (NGEM) program announced up to $20 million is now available to develop a new generation of energy efficient, high power density, high speed integrated MV drive systems for a wide variety of critical energy applications. This Financial Opportunity

  12. Key Dates | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Key Activities Key Activities Key Activities Bringing Innovative Manufacturing Technologies and Materials to Full "To Scale" Industrial Use Innovation is inherent in all of AMO's investment activities helping small, medium, and large manufacturers develop cutting-edge clean energy products and technology that reduce energy consumption in every stage or place it is used in industry. Built upon a foundation of strong public-private partnerships, our support of advanced manufacturing

  13. The President's Manufacturing Initiative | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentation prepared by Dale Hall for the Roadmap Workshop on Manufacturing R&D for the ... Manufacturing National Program Office Roadmap on Manufacturing R&D for the Hydrogen ...

  14. Vehicle Technologies Office Merit Review 2014: Modular Process Equipment for Low Cost Manufacturing of High Capacity Prismatic Li-Ion Cell Alloy Anodes

    Broader source: Energy.gov [DOE]

    Presentation given by Applied Materials at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about modular process equipment...

  15. Office of Inspector General

    Energy Savers [EERE]

    Office of Inspector General Office of Audits and Inspections Work Plan for FY 2013 Audits Central Audits Division  Ecotality  Funding Overlap  Follow-up on Smart Grid Investment Grant  DOE's Loan Program Office's Portfolio Management  Office of Fossil Energy's Regional Carbon Sequestration Partnerships  Advanced Manufacturing Office's Combined Heat and Power Systems  DOE's Management of Contaminated Non-EM Facilities  Unneeded Real Estate  Review of For-Profit Grantees

  16. Vehicle Technologies Office Merit Review 2014: GATE Center of Excellence at UAB for Lightweight Materials and Manufacturing for Automotive, Truck and Mass Transit

    Broader source: Energy.gov [DOE]

    Presentation given by University of Alabama at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about GATE Center of...

  17. Vehicle Technologies Office Merit Review 2015: IR Thermography as a Non-Destructive Evaluation (NDE) Tool for Lithium-Ion Battery Manufacturing

    Broader source: Energy.gov [DOE]

    Presentation given by Oak Ridge National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about IR thermography...

  18. Vehicle Technologies Office Merit Review 2015: Utilization of UV or EB Curing Technology to Significantly Reduce Costs and VOCs in the Manufacture of Lithium-Ion Battery Electrodes

    Broader source: Energy.gov [DOE]

    Presentation given by Miltec UV International at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about utilization of UV or...

  19. Vehicle Technologies Office Merit Review 2014: GATE Center of Excellence at UAB for Lightweight Materials and Manufacturing for Automotive, Truck and Mass Transit

    Broader source: Energy.gov [DOE]

    Presentation given by University of Alabama at Birmingham at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about GATE...

  20. Vehicle Technologies Office Merit Review 2015: GATE Center of Excellence at UAB for Lightweight Materials and Manufacturing for Automotive, Truck and Mass Transit

    Broader source: Energy.gov [DOE]

    Presentation given by University of Alabama Birmingham at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about GATE Center...

  1. Vehicle Technologies Office Merit Review 2014: Utilization of UV or EB Curing Technology to Significantly Reduce Costs and VOCs in the Manufacture of Lithium-Ion Battery Electrodes

    Broader source: Energy.gov [DOE]

    Presentation given by Miltec UV International at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about the utilization of UV...

  2. AMO Innovations Draw Crowds at Hannover Messe 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AMO Innovations Draw Crowds at Hannover Messe 2016 AMO Innovations Draw Crowds at Hannover Messe 2016 May 10, 2016 - 5:56pm Addthis The NNMI booth at Hannover Messe 2016. Photo courtesy of PowerAmerica. The NNMI booth at Hannover Messe 2016. Photo courtesy of PowerAmerica. During the week of April 25-29, over 190,000 visitors took over the city of Hanover, Germany for the 70th annual Hannover Messe, the world's largest industrial conference. Throughout the week, world industry leaders attended

  3. AMO would like to invite you to register now for the 2014 Better Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summit | Department of Energy would like to invite you to register now for the 2014 Better Buildings Summit AMO would like to invite you to register now for the 2014 Better Buildings Summit April 16, 2014 - 4:46pm Addthis Don't miss out on the Department of Energy's 2014 Better Buildings Summit taking place May 7-9 in Washington D.C. The Summit is a unique opportunity for Better Plants Partners and other AMO stakeholders to network with peers and learn about proven market and technology

  4. The Office

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Energy Efficiency and Renewable Energy (EERE) is leading the U.S. Department of Energy's efforts to deliver market-driven solutions for energy- saving homes, buildings, and manufacturing; sustainable transportation; and renewable power. Sustainable TRANSPORTATION Renewable ENERGY Energy EFFICIENCY EERE research has helped reduce production costs of automotive lithium-ion batteries by ~70% since 2008 More than electric charging units 20,000 http://www.afdc.energy.gov/fuels/

  5. Additive Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MST » MST Research Programs » Additive Manufacturing Additive Manufacturing A method allowing unparalleled manufacturing control, data visualization, and high-value parts repair. Through additive manufacturing, Los Alamos is developing materials for the future. Taking complex manufacturing challenges from design to fabrication. A science and engineering approach for additive manufacturing solutions. Get Expertise John Carpenter Technical Staff Member Metallurgy Email Division Leader Materials

  6. AMS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AMO Events AMO Events Below you will find information on the Advanced Manufacturing Office's upcoming events, sessions, and webinars. EVENT: 2016 DOE ADVANCED MANUFACTURING OFFICE PEER REVIEW - JUNE 14-15, 2016 June 14, 2016 8:00AM to 5:00PM EDT Advanced Manufacturing Home Key Activities Research & Development Projects Facilities Technical Assistance

    News AMO News RSS May 13, 2016 AMO News Notice of Intent to Issue Funding for Clean Energy Manufacturing Innovation Institute Funding

  7. Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    energy-saving solutions, which helps make our country run better through increased efficiency-better plants, manufacturing processes, products, new homes, ways to improve older homes, and buildings in which to work, shop, and lead our everyday lives. Highlights of the EERE portfolio include: Better Buildings Challenge EERE is spearheading this new public-private leadership program to reduce commercial building energy use by 20% by 2020, to help save $40 billion on energy bills annually, and to

  8. New Institute for Advanced Composites Manufacturing Innovation Announced |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy AMO's New Institute for Advanced Composites Manufacturing Innovation will Focus on Reducing Energy Use "Places like this are who we are. We create. We innovate. We build. We do it together." -President Obama, January 9, 2015 The Institute for Advanced Composites Manufacturing Innovation is a public-private consortium of 122 leading U.S. manufacturers, universities, and non-profits that will focus on advanced composites-materials that are three times as strong

  9. Solicitations

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) provides cost-shared funding to pursue innovative technology R&D and increase energy efficiency across the manufacturing sector. Funding is awarded...

  10. Additive Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    manufacturing and national security To realize additive manufacturing's potential as a disruptive technology for Los Alamos National Laboratory's national security missions,...

  11. Manufacturing Innovation Institute for Smart Manufacturing: Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Innovation Institute for Smart Manufacturing: Advanced Sensors, Controls, Platforms, and Modeling for Manufacturing Manufacturing Innovation Institute for Smart ...

  12. Joint Fuel Cell Technologies and Advanced Manufacturing Webinar...

    Broader source: Energy.gov (indexed) [DOE]

    the presentation slides from the "Joint Fuel Cell Technologies Office and Advanced Manufacturing Office Webinar" held November 20, 2012. PDF icon Joint Fuel Cell Technologies ...

  13. Office of Strategic Programs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Strategic Programs STEAB Meeting JoAnn Milliken Washington, DC Acting Director June 27, 2012 Strategic Programs * Advanced Manufacturing * Sustainability Performance * Strategic Programs OFFICE OF ENERGY EFFICIENCY AND RENEWABLE ENERGY ENERGY EFFICIENCY * Advanced Manufacturing * Building Technologies * Federal Energy Management * Weatherization & Intergovernmental RENEWABLE ENERGY * Geothermal Technologies * Solar Energy Technologies * Wind & Water Technologies TRANSPORTATION *

  14. Advanced Methods for Manufacturing Newslettter- Issue 3

    Broader source: Energy.gov [DOE]

    The Advanced Methods for Manufacturing newsletter includes information about selected projects pertaining to additive manufacturing, concrete technologies, welding innovations and imaging techniques for design reconstruction currently funded by the Department of Energy's Office of Nuclear Energy.

  15. QTR Webinar: Chapter 8- Industry and Manufacturing

    Broader source: Energy.gov [DOE]

    The DOE EERE Advanced Manufacturing Office hosted a QTR webinar to obtain input from Leaders in Academia, Industry, and Government on Chapter 8, Industry and Manufacturing, and the associated Technology Assessments.

  16. Nanomanufacturing Portfolio: Manufacturing Processes and Applications to Accelerate Commercial Use of Nanomaterials

    SciTech Connect (OSTI)

    Industrial Technologies Program

    2011-01-05

    This brochure describes the 31 R&D projects that AMO supports to accelerate the commercial manufacture and use of nanomaterials for enhanced energy efficiency. These cost-shared projects seek to exploit the unique properties of nanomaterials to improve the functionality of industrial processes and products.

  17. AMO Deputy Director Addresses Water-Energy Nexus at 2016 Energy Efficiency

    Office of Environmental Management (EM)

    Global Forum | Department of Energy Deputy Director Addresses Water-Energy Nexus at 2016 Energy Efficiency Global Forum AMO Deputy Director Addresses Water-Energy Nexus at 2016 Energy Efficiency Global Forum May 20, 2016 - 3:49pm Addthis From left to right: Moderator Ramola Musante, panelists Ron Voglewede, Bill Varley, Rob Ivester, and S. Raghupathy. From left to right: Moderator Ramola Musante, panelists Ron Voglewede, Bill Varley, Rob Ivester, and S. Raghupathy. Water is a part of every

  18. DOE/AMO NG Infrastructure R & D & Methane emissions Mitigation workshop

    Energy Savers [EERE]

    Proprietary and Confidential to NYSEARCH/NGA DOE/AMO NG INFRASTRUCTURE R & D & METHANE EMISSIONS MITIGATION WORKSHOP November 2014 David Merte & Daphne D'Zurko, NYSEARCH/NGA dmerte@northeastgas.org ddzurko@northeastgas.org NYSEARCH 2 NYSEARCH Program Research Areas * Improved Installation, Maintenance & Repair * Pipeline Integrity/Direct & Remote Assessment * Pipe Location * Leak Detection * Real-time Sensing and Inspection for Distribution * Environment/Reducing Greenhouse

  19. Manufacturing Success Stories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Advanced Manufacturing Office; John Dennis, Mayor of West Lafayette; Mitch Daniels, President of Purdue University; R. Byron Pipes, John Leighton Bray Distinguished...

  20. Institute for Advanced Composites Manufacturing Innovation Holds...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... of Energy Advanced Manufacturing Office; John Dennis, Mayor of West Lafayette; Mitch Daniels, President of Purdue University; R. Byron Pipes, John Leighton Bray Distinguished ...

  1. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    2(94) Distribution Category UC-950 Manufacturing Consumption of Energy 1994 December 1997 Energy Information Administration Office of Energy Markets and End Use U.S. Department of...

  2. Clean Energy Manufacturing Initiative: Technology Research and Development

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Clean Energy Manufacturing Initiative: Technology Research and Development Clean Energy Manufacturing Initiative: Technology Research and Development Through the Clean Energy Manufacturing Initiative, U.S. Department of Energy offices and programs have increased funding for manufacturing research and development (R&D) across the board with the goal of growing the clean energy manufacturing industry in the United States. The Advanced Manufacturing Office's R&D

  3. Manufacturing consumption of energy 1991

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

  4. Office of Executive Resources Office of the Chief Human Capital Officer

    Office of Environmental Management (EM)

    Office of Energy Efficiency & Renewable Energy Advanced Manufacturing Office Quadrennial Technology Review (QTR): Technology Assessment - Sustainable Manufacturing/Flow of Materials Through Industry Joe Cresko - joe.cresko@ee.doe.gov Sustainable Manufacturing Workshop Portland, OR January 6, 2016 2 Quadrennial Technology Review-2015 hOp://www.energy.gov/quadrennial-technology-review-2015 The QTR is a comprehensive assessment of science and energy technology R&D opportuniHes to address

  5. Manufacturing Success Stories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency » Manufacturing Success Stories Manufacturing Success Stories RSS The Office of Energy Efficiency and Renewable Energy's (EERE) successes in developing technologies and processes for more efficient energy management systems create big opportunities for energy savings and new jobs in manufacturing. Explore EERE's manufacturing success stories below. November 17, 2015 Manufacturing Success Stories EERE Success Story-ORNL Unveils 3D-Printed Home and Vehicle with the Unique

  6. AMO News

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    improved their energy performance by more than 15% over three years. Facilities in Peru, Indiana and Columbia, South Carolina earned Gold level certification, while the Rojo...

  7. Office of Energy Policy and Systems Analysis | Department of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office of Energy Policy and Systems Analysis Office of Energy Policy and Systems Analysis ... Latest Fact Sheets Fact Sheet: Advanced Natural Gas Systems Manufacturing R&D Initiative ...

  8. Manufacturing Glossary

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Home > Energy Users > Energy Efficiency Page > Glossary for the Manufacturing...

  9. Fiber Reinforced Polymer Composite Manufacturing Workshop: Summary Report

    Energy Savers [EERE]

    Fiber Reinforced Polymer Composite Manufacturing Workshop: Summary Report 1 | P a g e Fiber Reinforced Polymer Composite Manufacturing Workshop: Summary Report 2 | P a g e THE DEPARTMENT OF ENERGY (DOE)'S ADVANCED MANUFACTURING OFFICE PROVIDED FUNDING FOR THIS MEETING AND SUMMARY REPORT. The DOE Office of Energy Efficiency and Renewable Energy (EERE)'s Advanced Manufacturing Office partners with private and public stakeholders to support development and deployment of innovative technologies that

  10. National Electrical Manufacturers Association

    Energy Savers [EERE]

    July 24, 2014 VIA EMAIL TO: Regulatory.Review@hq.doe.gov Steven Croley, General Counsel Office of the General Counsel U.S. Department of Energy 1000 Independence Avenue SW., Washington, DC 20585 NEMA Comments on DOE Reducing Regulatory Burden RFI 79 Fed.Reg. 28518 (July 3, 2014) Dear Mr. Croley, The National Electrical Manufacturers Association (NEMA) thanks you for the opportunity to provide comments on the Department of Energy's efforts to make its regulatory program more effective and less

  11. R&D For Dispatchable Distributed Energy Resources At Manufacturing Sites- Workshop Summary Report, April 2015

    Broader source: Energy.gov [DOE]

    To explore what technical innovations are needed in D-DERs, the U.S. Department of Energy’s (US DOE’s) Advanced Manufacturing Office (AMO) sponsored a workshop in February 2016 in Austin, Texas. The workshop brought together experts from a variety of areas, including industrial consumers, distribution utilities, third-party aggregators, independent system operators (ISO), equipment suppliers, and academia and research. Discussion focused on key technical barriers that need to be addressed for D-DERs to play a larger role in providing services to the grid and the R&D pathways that have the greatest potential to overcome the barriers. Topic areas explored included advances needed in generation systems, forecasting and optimization tools, power conditioning systems, telemetry and network systems, sensors, controls, and data processing technologies. Based on feedback from participants at the workshop, numerous emerging technology areas were identified that would enhance the ability of D-DERs to support the electric grid and increase the return on investment for SMEs that invest in D-DER systems.

  12. Manufacturing technologies

    SciTech Connect (OSTI)

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  13. Advanced Manufacturing Office Update, March 2015 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    that seek to fill the innovation pipeline of U.S. industry: Next-Generation ... We want to encourage the business community to propose fundamental applied R&D projects ...

  14. Advanced Manufacturing Office Update, July 2014 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... and 15 individual sectors (such as chemicals, iron and steel, and food and beverage). ... More World Energy Engineering Congress October 1-3 | Washington, DC Annual conference ...

  15. Advanced Manufacturing Office Update, July 2015 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovation Launched 2015 Better Buildings Summit Celebrates Continued Energy and Cost Savings DOE Recognizes High-Achieving Better Plants and Superior Energy Performance...

  16. Request for Information (RFI): Advanced Manufacturing Office...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The purpose of this RFI is to solicit feedback from industry, academia, research ... Innovation Institute RFI Seeks Feedback on Third-party Maintenance Strategy for ...

  17. Power America - Advanced Manufacturing Office Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    bandgap semiconductor-based power electronics, which allow electronic systems to be smaller, faster and more efficient than power electronics made from silicon. - US ...

  18. Weekly Announcements from the Advanced Manufacturing Office,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tuesday, April 5th and Wednesday, April 6th in Knoxville, TN. Discussion topics will include process evolution, products and processes, and traditional and high tech tooling. ...

  19. Categorical Exclusion (CX) Determinations By Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office Categorical Exclusion (CX) Determinations By Office Secretarial Offices Advanced Research Projects Agency-Energy Advanced Technology Vehicles Manufacturing Loan Program Civilian Radioactive Waste Management Office of Electricity Delivery and Energy Reliability Office of Energy Efficiency and Renewable Energy Environmental Management Fossil Energy Natural Gas Regulation Health, Safety, and Security Intelligence and Counterintelligence Legacy Management Loan Programs Office Nuclear Energy

  20. Budget

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) budget request for fiscal year (FY) 2012 has been submitted for Congressional approval. The FY 2011 budget passed as an omnibus bill.

  1. Webmaster | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webmaster Webmaster Please email the AMO Webmaster to send your comments, report problems, and/or ask questions about information on the Advanced Manufacturing Office website.

  2. About Industrial Distributed Energy

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office's (AMO's) Industrial Distributed Energy activities build on the success of predecessor DOE programs on distributed energy and combined heat and power (CHP) while...

  3. Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Advanced Manufacturing Office (AMO) aligns its activities with recommendations from the President and his advisors, while drawing insights from industrial experts and research ...

  4. 3 Reasons Why Advanced Manufacturing Institutes Matter | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Why Advanced Manufacturing Institutes Matter 3 Reasons Why Advanced Manufacturing Institutes Matter February 1, 2016 - 3:06pm Addthis Watch how manufacturing Institutes like the Institute for Advanced Composites Manufacturing Innovation are revolutionizing America's clean energy economy. Paul Lester Paul Lester Digital Content Specialist, Office of Public Affairs KEY FACTS National Network for Manufacturing Innovation aims to drive down the cost of advanced manufacturing technologies.

  5. Manufacturing Energy and Carbon Footprint References | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    References Manufacturing Energy and Carbon Footprint References PDF icon footprint_references.pdf More Documents & Publications 2010 Manufacturing Energy and Carbon Footprints: References 2010 Manufacturing Energy and Carbon Footprints: Definitions and Assumptions Webtrends Archives by Fiscal Year - Advanced Manufacturing Office

  6. Fuel Cell Technologies Manufacturing Research and Development | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy You are here Home » Fuel Cell Technologies Manufacturing Research and Development Fuel Cell Technologies Manufacturing Research and Development Fuel Cell Technologies Manufacturing Research and Development Within the Office of Energy Efficiency and Renewable Energy (EERE), the Fuel Cell Technologies Office (FCTO) supports manufacturing research and development (R&D) activities to improve processes and reduce the cost of components and systems for hydrogen production, delivery,

  7. Development of Adaptive Model Refinement (AMoR) for Multiphysics and Multifidelity Problems

    SciTech Connect (OSTI)

    Turinsky, Paul

    2015-02-09

    This project investigated the development and utilization of Adaptive Model Refinement (AMoR) for nuclear systems simulation applications. AMoR refers to utilization of several models of physical phenomena which differ in prediction fidelity. If the highest fidelity model is judged to always provide or exceeded the desired fidelity, than if one can determine the difference in a Quantity of Interest (QoI) between the highest fidelity model and lower fidelity models, one could utilize the fidelity model that would just provide the magnitude of the QoI desired. Assuming lower fidelity models require less computational resources, in this manner computational efficiency can be realized provided the QoI value can be accurately and efficiently evaluated. This work utilized Generalized Perturbation Theory (GPT) to evaluate the QoI, by convoluting the GPT solution with the residual of the highest fidelity model determined using the solution from lower fidelity models. Specifically, a reactor core neutronics problem and thermal-hydraulics problem were studied to develop and utilize AMoR. The highest fidelity neutronics model was based upon the 3D space-time, two-group, nodal diffusion equations as solved in the NESTLE computer code. Added to the NESTLE code was the ability to determine the time-dependent GPT neutron flux. The lower fidelity neutronics model was based upon the point kinetics equations along with utilization of a prolongation operator to determine the 3D space-time, two-group flux. The highest fidelity thermal-hydraulics model was based upon the space-time equations governing fluid flow in a closed channel around a heat generating fuel rod. The Homogenous Equilibrium Mixture (HEM) model was used for the fluid and Finite Difference Method was applied to both the coolant and fuel pin energy conservation equations. The lower fidelity thermal-hydraulic model was based upon the same equations as used for the highest fidelity model but now with coarse spatial meshing, corrected somewhat by employing effective fuel heat conduction values. The effectiveness of switching between the highest fidelity model and lower fidelity model as a function of time was assessed using the neutronics problem. Based upon work completed to date, one concludes that the time switching is effective in annealing out differences between the highest and lower fidelity solutions. The effectiveness of using a lower fidelity GPT solution, along with a prolongation operator, to estimate the QoI was also assessed. The utilization of a lower fidelity GPT solution was done in an attempt to avoid the high computational burden associated with solving for the highest fidelity GPT solution. Based upon work completed to date, one concludes that the lower fidelity adjoint solution is not sufficiently accurate with regard to estimating the QoI; however, a formulation has been revealed that may provide a path for addressing this shortcoming.

  8. DOE's AMO Releases Workshop "Save the Date" and New RFI on Composite...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in the Washington, D.C. area on Fiber Reinforced Polymer (FRP) Composite Manufacturing. ... Fiber reinforced polymer composites can be used in vehicles, industrial equipment, wind ...

  9. GATE Center of Excellence in Lightweight Materials and Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies Vehicle Technologies Office Merit Review 2014: GATE Center of Excellence at UAB for Lightweight Materials and Manufacturing for Automotive, Truck and Mass Transit...

  10. Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet)...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy-Saving Homes, Buildings, & Manufacturing (Fact Sheet), Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE) Energy-Saving Homes, Buildings, & ...

  11. Testing, Manufacturing, and Component Development Projects

    Broader source: Energy.gov [DOE]

    This report covers the Wind and Water Power Technologies Office's testing, manufacturing, and component development projects for utility-scale and distributed wind energy from fiscal years 2006 to 2014.

  12. American Energy and Manufacturing Competitiveness Summit

    Broader source: Energy.gov [DOE]

    The 2015 American Energy and Manufacturing Competitiveness Summit will be hosted September 15–16; this gathering of preeminent leaders from industry, academia, labor, the national laboratories, government, and media aims to increase American competitiveness in clean energy and manufacturing. Bioenergy Technologies Office Technology Manager Jay Fitzgerald will be representing the Office, and the Lawrence Berkeley National Lab will be exhibiting a special hands-on demonstration of the latest bioenergy equipment, models, and other research, development, and demonstration tools.

  13. Manufacturing Innovation Institute for Smart Manufacturing: Advanced

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sensors, Controls, Platforms, and Modeling for Manufacturing | Department of Energy Manufacturing Innovation Institute for Smart Manufacturing: Advanced Sensors, Controls, Platforms, and Modeling for Manufacturing Manufacturing Innovation Institute for Smart Manufacturing: Advanced Sensors, Controls, Platforms, and Modeling for Manufacturing September 23, 2015 - 2:38pm Addthis Posted Date: Sep 15, 2015 Original Closing Date for Applications: Jan 29, 2016 A mandatory Concept Paper is due

  14. Vehicle Technologies Office Merit Review 2015: Dramatically Improve the Safety Performance of Li Ion Battery Separators and Reduce the Manufacturing Cost using Ultraviolet Curing and High Precision Coating Technologies

    Broader source: Energy.gov [DOE]

    Presentation given by Miltec UV International at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about dramatically improve...

  15. additive manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    additive manufacturing - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  16. Green Manufacturing

    SciTech Connect (OSTI)

    Patten, John

    2013-12-31

    Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

  17. Advanced Methods for Manufacturing Newsletter - Issue 1 | Department of

    Energy Savers [EERE]

    Energy Methods for Manufacturing Newsletter - Issue 1 Advanced Methods for Manufacturing Newsletter - Issue 1 The Advanced Methods for Manufacturing (AMM) newsletter includes information about selected projects pertaining to additive manufacturing, concrete technologies, and welding innovations currently funded by the Department of Energy's Office of Nuclear Energy. PDF icon NEET-Advanced Methods fo Manufacturing Newsletter - Issue 1.pdf More Documents & Publications Advanced Methods for

  18. Advanced Methods for Manufacturing Newsletter - Issue 2 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Newsletter - Issue 2 Advanced Methods for Manufacturing Newsletter - Issue 2 The Advanced Methods for Manufacturing (AMM) newsletter includes information about selected projects pertaining to additive manufacturing, concrete technologies, and welding innovations currently funded by the Department of Energy's Office of Nuclear Energy. PDF icon NEET-Advanced Methods for Manufacturing-Newsletter Issue 2.pdf More Documents & Publications FY 2015 Advanced Methods for Manufacturing

  19. Fuel Cell Manufacturing: American Energy and Manufacturing Competitive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Presentation on ...

  20. CMTA Office

    High Performance Buildings Database

    Prospect, KY When CMTA outgrew their old office space, the consultant engineering company decided to construct a new building. Not only does the structure provide offices for the firm, it also showcases progressive design elements and allows the firm to test new technologies and demonstrate their effectiveness to clients. The new CMTA office building is located in a live-work development on the outskirts of Louisville, KY. The location was selected to place the office close to where the employees live.

  1. Office | Open Energy Information

    Open Energy Info (EERE)

    Office Jump to: navigation, search Building Type Office Definition Buildings used for general office space, professional office, or administrative offices. Medical offices are...

  2. Bioenergy Technologies Office Announces Notice of Intent for the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing of Biofuels, Bioproducts, and Biopower | Department of Energy Bioenergy Technologies Office Announces Notice of Intent for the Manufacturing of Biofuels, Bioproducts, and Biopower Bioenergy Technologies Office Announces Notice of Intent for the Manufacturing of Biofuels, Bioproducts, and Biopower April 15, 2016 - 6:54pm Addthis The U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) intends to issue, on behalf of the Bioenergy Technologies

  3. Office of Chief Financial Officer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    high optical accuracy reflectors, reduce collector structure weight and material, develop lean and rapid methods for manufacturing, assembly and installation, develop highly...

  4. Clean Energy Manufacturing Initiative Midwest Regional Summit: Lightweighting Breakout Session Summary June 21, 2013

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ADVANCED MANUFACTURING OFFICE Clean Energy Manufacturing Initiative Midwest Regional Summit: Lightweighting Breakout Session Summary June 21, 2013 The DOE Office of Energy Efficiency and Renewable Energy (EERE)'s Advanced Manufacturing Office works with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality domestic manufacturing jobs and enhance the global competitiveness of the United States.

  5. Solar Manufacturing Projects | Department of Energy

    Energy Savers [EERE]

    Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects SOLAR ...

  6. Office of Energy Efficiency and Renewable Energy Fiscal Year...

    Broader source: Energy.gov (indexed) [DOE]

    Office of Energy Efficiency and Renewable Energy Fiscal Year 2014 Budget Rollout - Energy Saving Homes, Buildings, and Manufacturing, May 2013. PDF icon buildingsstakeholderpres...

  7. Office of the Assistant General Counsel for Enforcement

    Broader source: Energy.gov [DOE]

    DOE's Office of Enforcement in the Office of the General Counsel leads the Department's efforts to ensure manufacturers deliver products that meet energy and water conservation standards. ...

  8. Office Buildings - Types of Office Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    administration building Insurance company headquarters building Local insurance agency Social services office Attorney's office Real estate sales office Government office State...

  9. Fellows' Officers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Officers Fellows' Officers Current officers and listing of coordinators from 1982 to present. Current and past officers, coordinators 2015-2016 Dipen Sinha, Coordinator Chuck Farrar, Deputy Coordinator Secretary (vacant) Past coordinators 2014-2015: Brad Meyer 2013-2014: Toni Taylor 2012-2013: Pat Colestock 2011-2012:Quanxi Jia 2010-2011: Joyce Guzik 2009-2010: Darryl L. Smith 2008-2009: S. Peter Gary 2007-2008: R. S. Hixson 2006-2007: W. C. Priedhorsky 2005-2006: G. T. Gray III 2004-2005: M. M.

  10. Security Officer

    Broader source: Energy.gov [DOE]

    This position is located in the Security and Continuity of Operations (NN) organization of the Chief Administrative Office (N), Bonneville Power Administration. The Security and Continuity of...

  11. Mark Johnson | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mark Johnson About Us Mark Johnson - Advanced Manufacturing Office Director Mark Johnson, Ph.D., serves as the Director of the Advanced Manufacturing Office (AMO) in the Office of Energy Efficiency and Renewable Energy (EERE). AMO is focused on creating a fertile innovation environment for advanced manufacturing, enabling vigorous domestic development of new energy-efficient manufacturing processes and materials technologies to reduce the energy intensity and life-cycle energy consumption of

  12. Clean Energy Manufacturing Initiative Solid-State Lighting | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Solid-State Lighting Clean Energy Manufacturing Initiative Solid-State Lighting Addthis Description Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the United States. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase

  13. Energy-Saving Homes, Buildings, and Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy-Saving Homes, Buildings, and Manufacturing Energy-Saving Homes, Buildings, and Manufacturing Buildings Buildings Read more Government Energy Management Government Energy Management Read more Homes Homes Read more Manufacturing Manufacturing Read more The Office of Energy Efficiency and Renewable Energy (EERE) leads a robust community of researchers and other partners to continually develop innovative, cost-effective energy-saving solutions, which helps make our country run better through

  14. Exploring the Wind Manufacturing Map | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exploring the Wind Manufacturing Map Exploring the Wind Manufacturing Map August 15, 2012 - 5:01pm Addthis America's wind energy industry supports a growing domestic industrial base. Check out this map to find manufacturing facilities in your state. Matthew Loveless Matthew Loveless Data Integration Specialist, Office of Public Affairs What are the key facts? The domestic wind manufacturing industry has grown dramatically in the last 5 years, and now nearly 70 percent of the turbines installed

  15. DOE Collects $80,000 Civil Penalty From Showerhead Manufacturer |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy $80,000 Civil Penalty From Showerhead Manufacturer DOE Collects $80,000 Civil Penalty From Showerhead Manufacturer August 10, 2011 - 4:54pm Addthis The DOE Office of Enforcement has settled a civil penalty action against Hudson-Reed, Limited, after the manufacturer failed to certify over 60 of its showerhead models. In the settlement, the manufacturer further acknowledges that its showerheads used more water than allowed by federal law. As enacted by Congress,

  16. Fermilab | Directorate | Offices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Offices Office of Integrated Planning & Performance Management (IPPM) (authentication required) Office of Project Support Services (PSS) Office of Partnerships and Technology Transfer (OPTT) Office of Communication Program Planning Office Legal Office Last modified: 02/19

  17. WNR Offices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Offices, Experimental Areas, Buildings, and Contacts Description Contact Name Bldg/Room Phone Pager/Alt. Phone Group Office Julie Quintana 622/220 667-5377 665-5390 User Office Tanya Herrera 622/212 667-6797 MPF-31 Building Manager Kenny Madrid 31/125 665-0944 664-8327 MPF-17 Building Manager Gene Cartelli 6/133 667-2127 664-4234 MPF-7 Building Manager Bruce Wheeler 622/248 667-6715 664-8336 Property Julie Martinez 24/110 665-2058 664-6775 Waste Manager Lance Kloefkorn 6/236 665-3288 664-5972

  18. Driving Economic Growth: Advanced Technology Vehicles Manufacturing

    Broader source: Energy.gov [DOE]

    With $8 billion in loans and commitments to projects that have supported the production of more than 4 million fuel-efficient cars and more than 35,000 direct jobs across eight states, the Loan Programs Office Advanced Technology Vehicles Manufacturing (ATVM) loan program has played a key role in helping the American auto industry propel the resurgence of manufacturing in the United States.

  19. Next Generation Manufacturing Processes

    Broader source: Energy.gov [DOE]

    New process technologies can rejuvenate U.S. manufacturing. Novel processing concepts can open pathways to double net energy productivity, enabling rapid manufacture of energy-efficient, high...

  20. HPC4Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lab capabilities Manufacturing domain expertise National mission and guidance Bringing HPC to U.S. Manufacturers Energy Efficient Processes Energy Efficient Products...

  1. Director's Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Director's Office Director's Office Print Roger Falcone Director, Advanced Light Source, Ernest Orlando Lawrence Berkeley National Laboratory and Professor of Physics, University of California, Berkeley. Roger Falcone Web page at the University of California, Berkeley Advanced Light Source Lawrence Berkeley National Laboratory 1 Cyclotron Road, MS 80R0114 Berkeley, CA 94720 USA Tel. (510) 486-6692 Fax (510) 486-4960 Email: This e-mail address is being protected from spambots. You need JavaScript

  2. Related Links

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) aligns its activities with recommendations from the President and his advisors, while drawing insights from industrial experts and research institutions. Learn more about national priorities for manufacturing from these influential reports.

  3. Dispatchable Distributed Generation: Manufacturing’s Role in Support of Grid Modernization, FEBRUARY 10-11

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) held a workshop in Austin, Texas at the Embassy Suites Hotels on February 10-11, 2016. The topic of this 2 day workshop was the Role of the Manufacturing...

  4. Office of Strategic Programs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategic Programs Office of Strategic Programs The mission of the Office of Strategic Programs is to increase the overall effectiveness and impact of all of the Office of Energy Efficiency and Renewable Energy's (EERE's) activities. We do this through guiding and supporting cross-cutting legislative, communications, international, analytical, stakeholder engagement, workforce, and multi-technology-to-market activities including the Clean Energy Manufacturing Initiative (CEMI) and National

  5. Sustainability Performance Office | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    The following is a list of the oversight results by the Office of Inspector General regarding The Department's programs, grants, and projects funded under the Recovery Act. June 17, 2014 Audit Report: OAS-RA-14-04 Selected Activities of the Office of Energy Efficiency and Renewable Energy's Advanced Manufacturing Office April 14, 2014 Special Report: OAS-RA-L-14-01 Allegations Regarding the Department of Energy's State Energy Program Funding to South Dakota February 19, 2014 Special Report:

  6. Office of Chief Financial Officer

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-19

    This Order implements the provisions of the Chief Financial Officers Act of 1990 within the Department of Energy. Cancels SEN 34-91. Canceled by DOE O 520.1A.

  7. Fiber Reinforced Polymer Composite Manufacturing Workshop “Save the Date”

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy’s Advanced Manufacturing Office plans to host a Fiber Reinforced Polymer Composite Manufacturing Workshop in the Washington D.C. area on Monday January 13, 2014.

  8. Advanced Manufacturing Technician

    Broader source: Energy.gov [DOE]

    Alternate Title(s):Manufacturing Production Technician; Electro-Mechanical Technician; Electronics Maintenance Technician  

  9. NOTICE OF INTENT TO ISSUE A FUNDING OPPORTUNITY FOR INDUSTRIAL ASSESSMENT CENTERS

    Broader source: Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy (EERE) intends to issue, on behalf of the Advanced Manufacturing Office (AMO), a Funding Opportunity Announcement (FOA) entitled “Industrial Assessment Centers.”

  10. NOTICE OF INTENT: NGEM II Funding Opportunity

    Broader source: Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy (EERE) intends to issue, on behalf of the Advanced Manufacturing Office (AMO), a Funding Opportunity Announcement (FOA) entitled “Next Generation of Electric Machines: Enabling Technologies.”

  11. Jay Wrobel

    Broader source: Energy.gov [DOE]

    Jay Wrobel serves as the Manager of Technical Assistance for the Advanced Manufacturing Office (AMO) in the Office of Energy Efficiency and Renewable Energy (EERE). Jay oversees major programs that...

  12. EERE Technology Areas and Offices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EERE Technology Areas and Offices EERE Technology Areas and Offices The Office of Energy Efficiency and Renewable Energy (EERE) consists of several offices that support EERE's mission. This page lists all of the major offices and their websites. Energy Efficiency Advanced Manufacturing Buildings Federal Energy Management Weatherization and Intergovernmental Sustainability Performance Renewable Power Geothermal Solar Wind Water Sustainable Transportation Bioenergy Hydrogen and Fuel Cells Vehicles

  13. Office Buildings - Full Report

    U.S. Energy Information Administration (EIA) Indexed Site

    administration building Insurance company headquarters building Local insurance agency Social services office Attorney's office Real estate sales office Government office State...

  14. Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Science & Innovation » Energy Efficiency » Manufacturing Manufacturing Additive manufacturing, also know as 3D printing, has helped spark a creative manufacturing renaissance, allowing companies to create products in new ways while also reducing material waste, saving energy and shortening the time needed to bring products to market. Learn more about this game-changing technology. Manufacturing is the lifeblood of the American economy -- providing jobs for hard working American families

  15. Manufacturing Supply Chain

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administration (EIA) ‹ Consumption & Efficiency Manufacturing Energy Consumption Survey (MECS) Glossary › FAQS › Overview Data 2010 2006 2002 1998 1994 1991 Archive Analysis & Projections Cost of Natural Gas Used in Manufacturing Sector Has Fallen Graph showing Cost of Natural Gas Used in Manufacturing Sector Has Fallen Source: U.S. Energy Information Administration, Manufacturing Energy Consumption Survey (MECS) 1998-2010, September 6, 2013. New 2010 Manufacturing Energy

  16. Office of Test and Evaluation | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Office of Test and Evaluation The primary goal of the Office of Test and Evaluation is to ensure that the warheads and bombs in the U.S. nuclear weapons stockpile are safe, secure, and reliable by: Providing for development of engineering tools and manufacturing capabilities to support the life cycle of a nuclear weapon Providing oversight of engineering, design, manufacturing, and testing technology The Office of Test and Evaluation is responsible for supporting science, technology, and

  17. Industries & Technologies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Industries & Technologies Industries & Technologies The Advanced Manufacturing Office (AMO) emphasizes innovative technologies to increase manufacturing agility and open new markets. AMO also maintains a range of projects, analyses, protocols, and strategies to reduce industrial energy intensity and carbon emissions in specific industries and technology areas: Industries Aluminum Chemicals Forest Products Glass Metal Casting Mining Other Industries Petroleum

  18. Innovative Manufacturing and Materials for Low-Cost Lithium-Ion...

    Broader source: Energy.gov (indexed) [DOE]

    for Low-Cost Lithium-Ion Batteries Vehicle Technologies Office Merit Review 2014: Innovative Manufacturing and Materials for Low-Cost Lithium-Ion Batteries Vehicle Technologies ...

  19. DOE Warns Manufacturers Who Submitted Incomplete Certification Reports

    Broader source: Energy.gov [DOE]

    Washington, DC - The Department of Energy’s Office of General Counsel has sent warning letters to 9 manufacturers or trade associations that submitted incomplete energy-efficiency test data to...

  20. Office of Chief Financial Officer

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-11-27

    Page Change 1 to DOE O 520.1 modifies the responsibility statement to include NNSA Field CFO positions, modifies Heads of Field Elements responsibilities for consistency with the CFO responsibilities, and makes a minor change to reflect the establishment of the Office of Management, Budget and Evaluation. Cancels SEN 34-9.

  1. U.S. Coast Guard and Florida Power & Light Successfully Implement a Multi-Site UESC Project

    Energy Savers [EERE]

    U.S. Advanced Manufacturing and Clean Energy Technology Challenges May 6, 2014 AMO Peer Review Mark Johnson Director Advanced Manufacturing Office www.manufacturing.energy.gov This presentation does not contain any proprietary, confidential, or otherwise restricted information. 2 Outline * Big Picture on Manufacturing in US * Focus on Advanced Manufacturing * AMO Organization * Technical Assistance * R&D Facilities * R&D Projects * Goals for Meeting 3 Products invented here, now made

  2. Building Technologies Office Overview

    SciTech Connect (OSTI)

    2013-04-01

    Building Technologies Office Overview Presentation for the 2013 Building Technologies Office's Program Peer Review

  3. Director's Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Director's Office Print Roger Falcone Director, Advanced Light Source, Ernest Orlando Lawrence Berkeley National Laboratory and Professor of Physics, University of California, Berkeley. Roger Falcone Web page at the University of California, Berkeley Advanced Light Source Lawrence Berkeley National Laboratory 1 Cyclotron Road, MS 80R0114 Berkeley, CA 94720 USA Tel. (510) 486-6692 Fax (510) 486-4960 Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view

  4. Director's Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Director's Office Print Roger Falcone Director, Advanced Light Source, Ernest Orlando Lawrence Berkeley National Laboratory and Professor of Physics, University of California, Berkeley. Roger Falcone Web page at the University of California, Berkeley Advanced Light Source Lawrence Berkeley National Laboratory 1 Cyclotron Road, MS 80R0114 Berkeley, CA 94720 USA Tel. (510) 486-6692 Fax (510) 486-4960 Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view

  5. Energy-Saving Homes, Buildings, and Manufacturing Success Stories

    Broader source: Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy's (EERE) successes in converting tax dollars into more efficient energy solutions for our nation's buildings and manufacturing supply lines mean large-scale energy and cost savings. Learn how EERE's investments in energy solutions for homes, buildings, manufacturing, and the federal energy management sector translate into significant cost savings and a reduction in fossil fuel use.

  6. GATE Center of Excellence in Lightweight Materials and Manufacturing

    Broader source: Energy.gov (indexed) [DOE]

    Technologies | Department of Energy 6_vaidya_2012_p.pdf More Documents & Publications GATE Center of Excellence at UAB in Lightweight Materials for Automotive Applications GATE Center of Excellence in Lightweight Materials and Manufacturing Technologies Vehicle Technologies Office Merit Review 2014: GATE Center of Excellence at UAB for Lightweight Materials and Manufacturing for Automotive, Truck and Mass Transit

  7. DOE Loan Programs Office Update

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Department of Energy's Loan Programs Office (LPO) is now offering a periodic newsletter with updates and information on financing opportunities, LPO project and portfolio news, and more. LPO facilitates the accelerated deployment of innovative clean energy projects and advanced vehicle manufacturing in the United States. For more information about LPO, please visit our new website: energy.gov/lpo $4 billion in Loan Guarantees Available for Innovative Renewable Energy Projects and Efficient

  8. Tennessee-based IAC Helps Manufacturer Become More Energy Efficient |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Tennessee-based IAC Helps Manufacturer Become More Energy Efficient Tennessee-based IAC Helps Manufacturer Become More Energy Efficient November 14, 2011 - 12:22pm Addthis April Saylor April Saylor Former Digital Outreach Strategist, Office of Public Affairs What does this mean for me? With 50+ assessments and 500+ total recommendations made, this IAC's recommendations could save the average manufacturer evaluated an average $118,636 in electrical, natural gas, waste and

  9. DOE Reaches Settlement with Freezer Manufacturer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Settlement with Freezer Manufacturer DOE Reaches Settlement with Freezer Manufacturer May 29, 2015 - 9:20am Addthis The General Counsel's enforcement office settled an enforcement action against Perlick Corporation for $168,200. Perlick agreed to the settlement after manufacturing and distributing 841 units of freezer model HP24F. DOE found that the model consumed over 20% more energy than permitted under the applicable energy conservation standard. Documents related to the distribution of

  10. Video: Clean Energy Manufacturing Boosting U.S. Competitiveness |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Clean Energy Manufacturing Boosting U.S. Competitiveness Video: Clean Energy Manufacturing Boosting U.S. Competitiveness September 14, 2015 - 3:40pm Addthis Watch the Energy 101 video above to learn how clean energy manufacturing is changing the kinds of products we make and how they are built. Eric Barendsen Energy Technology Program Specialist, Office of Energy Efficiency and Renewable Energy KEY FACTS The United States has an important opportunity to be the worldwide

  11. Energy Use in Manufacturing

    Reports and Publications (EIA)

    2006-01-01

    This report addresses both manufacturing energy consumption and characteristics of the manufacturing economy related to energy consumption. In addition, special sections on fuel switching capacity and energy-management activities between 1998 and 2002 are also featured in this report.

  12. Manufacturing Day 2015

    Broader source: Energy.gov [DOE]

    All over the country, manufacturing companies and other organizations are preparing to host an anticipated 400,000 people who want to experience U.S. manufacturing up close and in person. On...

  13. NREL: Innovation Impact - Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manufacturing Menu Home Home Solar Solar Wind Wind Analysis Analysis Bioenergy Bioenergy Buildings Buildings Transportation Transportation Manufacturing Manufacturing Energy Systems Integration Energy Systems Integration Increasing U.S. Market Share in Solar Photovoltaic Manufacturing Close From 2000 to 2010, global shipments of solar cells and modules grew 53%, a wave that China and Taiwan rode to increase their combined market share from less than 2% to 54%. Meanwhile, U.S. market share

  14. Operations Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (~ii~,Richland Operations Office ~Z4TESO~Richland, Washington 99352 SEP 2 2009 CERTIFIED MAIL Ms. Sarah Washburn Heart of America Northwest 1314 N.E. 5 6 th Street Suite 100 Seattle, Washington 98105 Dear Ms. Washburn: FREEDOM OF INFORMATION ACT REQUEST (FOI 2009-0067) You requested, pursuant to the Freedom of Information Act (FOJA), the following documents relating to: 1 . "The authorization, decision to use, and actual use of any and all pesticides and herbicides anywhere within the

  15. Office of the Chief Financial Officer .:. Lawrence Berkeley National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office of the Chief Financial Officer Office of the Cheif Financial Officer Lawrence Berkeley Naitonal Laboratory Department of Energy Quicklinks: ---...

  16. Office of Fossil Energy

    Broader source: Energy.gov (indexed) [DOE]

    Terminal (Bcf) (Bcf) (Bcf) LNG Imports by Company Office of Fossil Energy Office of Oil & Natural Gas Office of Regulation and International Engagement Division of Natural Gas...

  17. Office of Energy Efficiency and Renewable Energy Fiscal Year 2014 Budget

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Rollout - Energy Saving Homes, Buildings, and Manufacturing | Department of Energy Fiscal Year 2014 Budget Rollout - Energy Saving Homes, Buildings, and Manufacturing Office of Energy Efficiency and Renewable Energy Fiscal Year 2014 Budget Rollout - Energy Saving Homes, Buildings, and Manufacturing Office of Energy Efficiency and Renewable Energy Fiscal Year 2014 Budget Rollout - Energy Saving Homes, Buildings, and Manufacturing, May 2013. PDF icon buildings_stakeholder_pres_0513.pdf More

  18. Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit

    Broader source: Energy.gov [DOE]

    Presentation on fuel cell manufacturing by Sunita Satyapal at the American Energy and Manufacturing Competitiveness Summit on December 12, 2013.

  19. An analysis of buildings-related energy use in manufacturing

    SciTech Connect (OSTI)

    Niefer, M.J.; Ashton, W.B.

    1997-04-01

    This report presents research by the Pacific Northwest National Laboratory (PNNL) to develop improved estimates of buildings-related energy use in US manufacturing facilities. The research was supported by the Office of Building Technology, State and Community Programs (BTS), Office of Energy Efficiency and Renewable Energy (EERE), US Department of Energy (DOE). The research scope includes only space conditioning and lighting end uses. In addition, this study also estimates the energy savings potential for application of selected commercial buildings technologies being developed by the BTS office to manufacturing and other industrial process facilities. 17 refs., 2 figs., 19 tabs.

  20. Additive Manufacturing: Going Mainstream

    Broader source: Energy.gov [DOE]

    Additive manufacturing, or 3D printing, is receiving attention from media, investment communities and governments around the world transforming it from obscurity to something to be talked about.

  1. Manufacturing R&D

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    such as metrology and quality control standards, modeling and simulation tools ... the establishment of a robust, domestic hydrogen and fuel cell manufacturing industry. ...

  2. Manufacturing | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in the production of clean energy technologies like electric vehicles, LED bulbs and solar panels. The Department is also working with manufacturers to increase their energy...

  3. Contribution to Nanotechnology Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    50 award for directed assembly September 3, 2008 Contribution to Nanotechnology Manufacturing LOS ALAMOS, New Mexico, September 3, 2008-A team of scientists spanning three...

  4. Roll to Roll Manufacturing

    SciTech Connect (OSTI)

    Daniel, Claus

    2015-06-09

    ORNL researchers are developing roll to roll technologies for manufacturing, automotive, and clean energy applications in collaboration with industry partners such as Eastman Kodak.

  5. Office of the Chief Financial Officer Organization Chart | Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Us Office of the Chief Financial Officer Organization Chart Office of the Chief Financial Officer Organization Chart OCFOFrontOffice2015.jpg Leadership Organization ...

  6. Kansas City Field Office Categorical Exclusion (CX) Determinations...

    National Nuclear Security Administration (NNSA)

    made by the Kansas City Field Office (KCFO) are listed below: 10302012, Additive Manufacturing using EOSINT M280, KCP12-03 10302012, Magnetic Pulser, KCP12-04 10302012,...

  7. In the OSTI Collections: 3-D Printing and Other Additive Manufacturing

    Office of Scientific and Technical Information (OSTI)

    Technologies | OSTI, US Dept of Energy, Office of Scientific and Technical Information 3-D Printing and Other Additive Manufacturing Technologies Dr. Watson computer sleuthing scientist. Article Acknowledgement: Dr. William N. Watson, Physicist DOE Office of Scientific and Technical Information Understanding Electron Beam Melting Is Additive Manufacturing Suitable? Two Projects Other Materials Additive Manufacturing Technologies References Reports Available Through OSTI's SciTech Connect

  8. Final Merit Review Agenda, DOE Advanced Manufacturing Office...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Iron and Steel Institute 10:50 - 11:10 am Research, Development, and Field Testing of Thermochemical Recuperation for High Temperature Furnace American Iron and Steel Institute ...

  9. Advanced Manufacturing Office: Case Study - The Challenge: Saving...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sewage System Process: Sewage Pumping System: Pump System Technology: Booster Pump, Energy-Efficient Motor Project Profile SIC: 4952 Products: Sewage Pumping Location: Milford, ...

  10. Advanced Manufacturing Office: Case Study - The Challenge: Improving...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Municipal Sewage System Process: Sewage Pumping System: Pump System Technology: Downsized pump, direct on-line pump controls Project Profile SIC: 4952 Products: Sewage Pumping ...

  11. Advanced Manufacturing Office, U.S. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... applications * In-situ metrology and process controls Optimization, reduced waste, ... separations; broad impact for petro-chemical industries, oil and gas, buildings. * ...

  12. Advanced Manufacturing Office: Case Study - The Challenge: Improving...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    frequency drives (VFDs) were installed on the induced draft fans of three boiler systems. ... Varying operating conditions, such as solid waste characteristics, boiler cleanliness, and ...

  13. Advanced Manufacturing Office, U.S. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation for the Sustainable Nanomaterials Workshop by U.S. Department of Energy held on June 26, 2012

  14. Testing, Manufacturing, and Component Development Projects for Utility-Scale and Distributed Wind Energy, Fiscal Years 2006-2014

    SciTech Connect (OSTI)

    None, None

    2014-04-01

    This report covers the Wind and Water Power Technologies Office's Testing, Manufacturing, and Component Development Projects for Utility-Scale and Distributed Wind Energy from 2006 to 2014.

  15. Catalyst Assisted Manufacture of Olefins (CAMOL)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Majid Keyvani, Ph.D., Lyondell Chemical Company U.S. DOE Advanced Manufacturing Office Peer Review Meeting Washington, D.C. May 6-7, 2014 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Background  Coke is a naturally occurring by-product of steam cracking  Coking (carbonaceous deposits) of the furnace coils increases energy requirements, requires frequent production interruptions to de-coke, and shortens coil life  Both the

  16. Vehicle Technologies Office News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Energy Efficiency & Renewable Energy Services Services Home Energy Basics States & Local Communities Technical Assistance Energy Analysis Jobs, Education, & Training Publications Funding Funding Home Small Business Program Efficiency Efficiency Home Buildings Homes Advanced Manufacturing Government Energy Management Renewables Renewables Home Solar Geothermal Wind Water Transportation Transportation Home Vehicles Bioenergy Hydrogen & Fuel Cells About Us About Us Home

  17. RFIRegReviewComments_EdisonElectricInstitute_03212011.pdf

    Energy Savers [EERE]

    Tools | Department of Energy RFI Seeks Feedback on Third-party Maintenance Strategy for AMO's Software Tools RFI Seeks Feedback on Third-party Maintenance Strategy for AMO's Software Tools July 28, 2014 - 12:19pm Addthis The Advanced Manufacturing Office (AMO) would like to understand the market opportunities for enhancing and expanding certain industrial system software tools and related assets (including training curriculum and written technical resources). Currently, these tools and

  18. Improving Steam System Performance: A Sourcebook for Industry, Second Edition (Book) (Revised)

    SciTech Connect (OSTI)

    Not Available

    2012-10-01

    Improving Steam System Performance: A Sourcebook for Industry was developed for the U.S. Department of Energy's (DOE) Advanced Manufacturing Office (AMO), formerly the Industrial Technologies Program. AMO undertook this project as a series of sourcebook publications. Other topics in this series include: compressed air systems, pumping systems, fan systems, process heating and motor and drive systems. For more information about program resources, see AMO in the Where to Find Help section of this publication.

  19. Women @ Energy: Cereda Amos

    Broader source: Energy.gov [DOE]

    "We can engage more women, girls, and other underrepresented groups in STEM professions by educating middle school and high school Science, Technology, and Mathematics teachers on opportunities in both the private and public sector. Many schools have clubs that invite speakers to talk about their profession and encourage the students to look early at what their future choices in college studies. Plugging in early is important as it opens up the possibilities, many of which they may not even know about." Read more from Cereda on her profile here.

  20. Geothermal Technologies Office - Webmaster | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies Office - Webmaster Geothermal Technologies Office - Webmaster

  1. State & Local Energy-Saving Homes, Building, and Manufacturing Resources |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Energy-Saving Homes, Building, and Manufacturing Resources State & Local Energy-Saving Homes, Building, and Manufacturing Resources State & Local Energy-Saving Homes, Building, and Manufacturing Resources The DOE Office of Energy Efficiency and Renewable Energy provides tools, resources, and more on saving energy in homes, buildings, and manufacturing to help state and local governments implement cost-effective energy efficiency technologies that provide the same

  2. Process Intensification Workshop – September 29-30, 2015

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) held a 2-day Process Intensification workshop in Old Town Alexandria, VA on September 29-30, 2015. The workshop set to promote the exchange of information...

  3. Office of the Chief Financial Officer

    Broader source: Energy.gov [DOE]

    Welcome to the U.S. Department of Energy, Office of the Chief Financial Officer. The mission of the Office of the Chief Financial Officer is to assure the effective management and financial integrity of Department of Energy programs, activities, and resources by developing and implementing and monitoring Department-wide policies and systems in the areas of budget administration, program analysis and evaluation, finance and accounting, internal controls, corporate financial systems, and strategic planning.

  4. Bio-Manufacturing: A Strategic clean energy manufacturing opportunity |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Bio-Manufacturing: A Strategic clean energy manufacturing opportunity Bio-Manufacturing: A Strategic clean energy manufacturing opportunity Breakout Session 1: New Developments and Hot Topics Session 1-A: Biomass and the U.S. Competitive Advantages for Manufacturing Clean Energy Products Libby Wayman, Director, EERE Clean Energy Manufacturing Initiative PDF icon b13_wayman_1-a.pdf More Documents & Publications Amped Up! Volume 1, No.2 NREL/DOE EERE QC/Metrology

  5. Office of Energy Policy and Systems Analysis | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages

    Efficiency & Renewable Energy Search Search form Search Office of Energy Efficiency & Renewable Energy Office of Energy Efficiency & Renewable Energy Services Services Home Energy Basics States & Local Communities Technical Assistance Energy Analysis Jobs, Education, & Training Publications Funding Funding Home Small Business Program Efficiency Efficiency Home Buildings Homes Advanced Manufacturing Government Energy Management Renewables Renewables Home Solar Geothermal Wind

  6. Renewable Energy Manufacturing Program

    Broader source: Energy.gov [DOE]

    Note: The initial application deadline for the Renewable Energy Manufacturing Program is June 30, 2016. Applications will be accepted following that date only if there are remaining funds available...

  7. NREL: Innovation Impact - Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Buildings Menu Home Home Solar Solar Wind Wind Analysis Analysis Bioenergy Bioenergy Buildings Buildings Transportation Transportation Manufacturing Manufacturing Energy Systems Integration Energy Systems Integration Buildings Use 40% of U.S. Energy Close Americans spend $400 billion annually to power homes and commercial buildings. An estimated $80 billion could be saved through energy efficiency. Close NREL's net-zero-energy Research Support Facility employs cutting-edge energy efficiency

  8. Additive Manufacturing Technology Assessment

    Energy Savers [EERE]

    of Energy Additive Manufacturing Meets the Critical Materials Shortage Additive Manufacturing Meets the Critical Materials Shortage April 9, 2014 - 11:15am Addthis Green light reflection from a low-oxygen environment, 3D-printer laser deposition of metal powder alloys. | Photo courtesy of Critical Materials Institute, Ames Laboratory Green light reflection from a low-oxygen environment, 3D-printer laser deposition of metal powder alloys. | Photo courtesy of Critical Materials Institute, Ames

  9. Office of Information Resources

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joanne Csordas (HS-1.21), Office of Business Operations, Office of Resource Management, Office of Health, Safety and Security, U.S. Department of Energy, HS-1.21, 1000 Independence ...

  10. Office of Fossil Energy

    Office of Environmental Management (EM)

    LNG Imports by Country of Origin LNG Imports by Receiving Terminal (Bcf) (Bcf) (Bcf) LNG Imports by Company Office of Fossil Energy Office of Oil & Natural Gas Office of Regulation ...

  11. SITE OFFICE CONSOLIDATION

    Broader source: Energy.gov [DOE]

    Paul Golan, Site Office Manager, SLAC/LBNL, presented on the role of the DOE Site Office. Paul covered the role of the DOE Site Office, operating model, and vision.

  12. Innovative Manufacturing Initiative Project Selections

    Broader source: Energy.gov [DOE]

    The Department announced nearly $23 million for 12 projects across the country to advance technologies aimed at helping American manufacturers dramatically increase the energy efficiency of their manufacturing facilities, lower costs, and develop new manufacturing technologies.

  13. Office of Executive Resources Office of the Chief Human Capital...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Executive Resources Office of the Chief Human Capital Officer U.S. Department of ... The request must be submitted to the Office of the Chief Human Capital Officer, Office of ...

  14. Code Verification by the Method of Manufactured Solutions (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Technical Report: Code Verification by the Method of Manufactured Solutions Citation Details In-Document Search Title: Code Verification by the Method of Manufactured Solutions × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and

  15. Ombuds Office Location & Hours

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ombuds Office Location & Hours Ombuds Office Location & Hours Committed to the fair and equitable treatment of all employees, contractors, and persons doing business with the...

  16. Geothermal Technologies Office: Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geothermal Technologies Office Details Bookmark & Share View Related Welcome to the Energy Department's Geothermal Technologies Office Publication and Product Library. Here...

  17. livermore field office

    National Nuclear Security Administration (NNSA)

    donation to those in need.

    Livermore Field Office sets core values as part of continuous improvement process http:nnsa.energy.govbloglivermore-field-office-sets-cor...

  18. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies Office Roland Risser Director, Building Technologies Office National Energy Consumption 40% 60% Reducing consumption or improving performance calls for cutting-edge ...

  19. Badging, Badge Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office Badging, Badge Office The central point where badges are issued to employees and official visitors. Contact Badge Office (505) 667-6901 Email Badge Office location As the central point where badges are issued to employees and official visitors, the Badge Office is located on the second floor of the Otowi Building (TA-3, Bldg. 261). Badge Office map Printable 2-page map to the Badge Office (pdf) More maps and directions Badge Office hours Monday-Friday: 7:30 am - 4 pm Wednesday: Closed

  20. Laser Manufacturing | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home > Impact > Advanced Laser Manufacturing Tools Deliver Higher Performance Click to ... Advanced Laser Manufacturing Tools Deliver Higher Performance In a research lab looking ...

  1. The Clean Energy Manufacturing Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    THE OPPORTUNITY OF CLEAN ENERGY MANUFACTURING By 2030, the global market for new energy ... and domestic energy resources in manufacturing represents important opportunities for ...

  2. Innovative Manufacturing Initiative Recognition Day

    Broader source: Energy.gov [DOE]

    The Innovative Manufacturing Initiative (IMI) Recognition Day (held in Washington, DC on June 20, 2012) showcased IMI projects selected by the Energy Department to help American manufacturers...

  3. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    (MECS) > MECS 1994 Combined Consumption and Fuel Switching Manufacturing Energy Consumption Survey 1994 (Combined Consumption and Fuel Switching) Manufacturing Energy Consumption...

  4. Office of Executive Resources Office of the Chief Human Capital...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Executive Resources Office of the Chief Human Capital Officer U.S. Department of Energy ... and performance awards. c. Chief Human Capital Officer (CHCO) and Office of Executive ...

  5. Office of Policy | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Office of Policy

  6. Livermore Field Office | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Livermore Field Office

  7. Content-Handled Transuranic (CH-TRU) Waste Content Codes (CH-TRUCON) |

    Office of Environmental Management (EM)

    Contacts for the Advanced Manufacturing Office Contacts for the Advanced Manufacturing Office Welcome to the Advanced Manufacturing Office (AMO). Our address, email, and phone number are provided below. U.S. Department of Energy - Advanced Manufacturing Office (formerly Industrial Technologies Program) Room 5F-065, MS EE-5A 1000 Independence Ave, SW Washington, DC 20585 Phone: (202) 586-9488 Nearest Metro stop: Smithsonian (blue/orange line) Get directions Website Contact: Send us your comments,

  8. Clean Energy Manufacturing Initiative Solid-State Lighting Video

    SciTech Connect (OSTI)

    Thomas, Sunil; Edmond, John; Krames, Michael; Raman, Sudhakar

    2014-09-23

    The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase yields, and lower costs.

  9. Clean Energy Manufacturing Initiative Solid-State Lighting

    SciTech Connect (OSTI)

    Thomas, Sunil; Edmond, John; Krames, Michael; Raman, Sudhakar

    2014-09-23

    The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase yields, and lower costs.

  10. Clean Energy Manufacturing Initiative Solid-State Lighting

    ScienceCinema (OSTI)

    Thomas, Sunil; Edmond, John; Krames, Michael; Raman, Sudhakar

    2014-12-03

    The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase yields, and lower costs.

  11. Manufacturer Voluntarily Reports Noncompliance

    Broader source: Energy.gov [DOE]

    Cooper Power Systems, LLC (“Cooper”), a wholly-owned subsidiary of Cooper Industries notified the U.S. Department of Energy’s (“DOE”) Office of Enforcement that it had distributed three...

  12. Manufacturing Laboratory (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Manufacturing Laboratory at the Energy Systems Integration Facility. The Manufacturing Laboratory at NREL's Energy Systems Integration Facility (ESIF) focuses on developing methods and technologies that will assist manufacturers of hydrogen and fuel cell technologies, as well as other renewable energy technologies, to scale up their manufacturing capabilities to volumes that meet DOE and industry targets. Specifically, the manufacturing activity is currently focused on developing and validating quality control techniques to assist manufacturers of low temperature and high temperature fuel cells in the transition from low to high volume production methods for cells and stacks. Capabilities include initial proof-of-concept studies through prototype system development and in-line validation. Existing diagnostic capabilities address a wide range of materials, including polymer films, carbon and catalyst coatings, carbon fiber papers and wovens, and multi-layer assemblies of these materials, as well as ceramic-based materials in pre- or post-fired forms. Work leading to the development of non-contact, non-destructive techniques to measure critical dimensional and functional properties of fuel cell and other materials, and validation of those techniques on the continuous processing line. This work will be supported by materials provided by our partners. Looking forward, the equipment in the laboratory is set up to be modified and extended to provide processing capabilities such as coating, casting, and deposition of functional layers, as well as associated processes such as drying or curing. In addition, continuous processes are used for components of organic and thin film photovoltaics (PV) as well as battery technologies, so synergies with these important areas will be explored.

  13. Advanced Manufacture of Reflectors

    Broader source: Energy.gov [DOE]

    The Advance Manufacture of Reflectors fact sheet describes a SunShot Initiative project being conducted research team led by the University of Arizona, which is working to develop a novel method for shaping float glass. The technique developed by this research team can drastically reduce the time required for the shaping step. By enabling mass production of solar concentrating mirrors at high speed, this project should lead to improved performance and as much as a 40% reduction in manufacturing costs for reflectors made in very high volume.

  14. Manufacturing Innovation in the DOE

    Energy Savers [EERE]

    October 2012 | Department of Energy Definitions and Assumptions, October 2012 Manufacturing Energy and Carbon Footprint Definitions and Assumptions, October 2012 PDF icon footprints_assumptions_definitions_2012.pdf More Documents & Publications Understanding Manufacturing Energy and Carbon Footprints, October 2012 2010 Manufacturing Energy and Carbon Footprints: Definitions and Assumptions U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis

    References Manufacturing

  15. Drug development and manufacturing

    DOE Patents [OSTI]

    Warner, Benjamin P.; McCleskey, T. Mark; Burrell, Anthony K.

    2015-10-13

    X-ray fluorescence (XRF) spectrometry has been used for detecting binding events and measuring binding selectivities between chemicals and receptors. XRF may also be used for estimating the therapeutic index of a chemical, for estimating the binding selectivity of a chemical versus chemical analogs, for measuring post-translational modifications of proteins, and for drug manufacturing.

  16. Office of Executive Resources Office of the Chief Human Capital...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Executive Resources Office of the Chief Human Capital Officer U.S. Department of ... and performance awards. c. Chief Human Capital Officer (CHCO) and Office of Executive ...

  17. February 2016 Office of Chief Financial Officer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 DOE/CF-0124 Volume 6 Power Marketing Administrations Southeastern Power Administration Southwestern Power Administration Western Area Power Administration Bonneville Power Administration Department of Energy FY 2017 Congressional Budget Request February 2016 Office of Chief Financial Officer Volume 6 DOE/CF-0124 Volume 6 Power Marketing Administrations Southeastern Power Administration Southwestern Power Administration Western Area Power Administration Bonneville Power Administration Printed

  18. Clean Energy Manufacturing Initiative Midwest Regional Summit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Breakout Session Summary More Documents & Publications Fiber Reinforced Polymer Composite Manufacturing Workshop Multimaterial Joining Workshop Manufacturing ...

  19. Energy Department, ArcelorMittal Partnership Boosts Efficiency of Major Steel Manufacturing Plant

    Broader source: Energy.gov [DOE]

    Senior Advisor in the Office of Energy Efficiency and Renewable Energy Gil Sperling, joined local officials and company representatives for the ribbon cutting ceremony and tour of the ArcelorMittal steel manufacturing plant in East Chicago, Indiana.

  20. Industrial Activities at DOE: Efficiency, Manufacturing, Process, and Materials R&D

    Broader source: Energy.gov [DOE]

    Overview of industrial activities at DOE by Joe Cresko, EERE Advanced Manufacturing Office, at the EERE QC Workshop held December 9-10, 2013, at the National Renewable Energy Laboratory in Golden, Colorado.

  1. The Kansas City Responsive Infrastructure Manufacturing and Sourcing Program, OAS-L-13-12

    Energy Savers [EERE]

    Kansas City Responsive Infrastructure Manufacturing and Sourcing Program OAS-L-13-12 August 2013 Department of Energy Washington, DC 20585 August 1, 2013 MEMORANDUM FOR THE MANAGER, KANSAS CITY FIELD OFFICE FROM: David Sedillo, Director Western Audits Division Office of Inspector General SUBJECT: INFORMATION: Audit Report on "The Kansas City Responsive Infrastructure Manufacturing and Sourcing Program" BACKGROUND The Kansas City Plant, managed and operated by Honeywell Federal

  2. Director, Building Technologies Office

    Broader source: Energy.gov [DOE]

    This position is located in the Building Technologies Office (BTO) of the Office of Energy Efficiency and Renewable Energy (EERE). The mission of EERE is to create and sustain American leadership...

  3. Office of Information Management

    Broader source: Energy.gov [DOE]

    The Office of Information Management provides a broad range of information technology services in support of the Associate Under Secretary for the Office of Environment, Health, Safety and Security (AU).

  4. Office of Information Resources

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    manager for this system or application? Raymond Holmer (HS-1.22), Director, Office of ... D a t e ) e: Raymond Holmer itle: i r i c t o r , Office of Information Management, ...

  5. DEPARTMENT OF I Office

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DEPARTMENT OF I Office of ENERGY Science SLAC Site Office SLAC National Accelerator Laboratory 2575 Sand Hill Road, MS-8A Menlo Park, CA 94025 DATE: January 11, 2012 MEMORANDUM ...

  6. Office of Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Social Twitter Google + Vimeo GovDelivery SlideShare Office of Science HomeOffice of Science Controlled Self-Assembly in Ternary Polymers Top Left: Schematic of ternary polymer ...

  7. Office Buildings: Consumption Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    and Type of Office Building Total (trillion Btu) per Building (million Btu) per Square Foot (thousand Btu) Dollars per Million Btu All Office Buildings 1,089 1,475 90.5 16.32...

  8. Carlsbad Field Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the CBFO Office of Quality Assurance, at (575) 234-7476. Sincerely, signature on file Jose R. Franco, Manager Carlsbad Field Office Enclosure CBFO:OQA:MPN:MAG:14-1052...

  9. The Advanced Manufacturing Partnership and the Advanced Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    engineering and mathematics (STEM) education ... manufacturing from university spinouts & licensing * ... * High school teaching and learning models must be adapted ...

  10. Geothermal Technologies Office April

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Annual Report Geothermal Technologies Office April 2016 1 2015 Annual Report | Geothermal Technologies Office Director's Message Geothermal Technologies Office FY 2016 Budget at a Glance Enhanced Geothermal Systems Hydrothermal Program Low-Temperature and Coproduced Resources Systems Analysis Events and Highlights People Acronyms Resources Table of Contents 2 2 3 7 13 17 19 23 26 28 2015 Achievements Geothermal Technologies Office Steam, West Flank of Coso, NV The 2015 Annual Report of the

  11. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office (BTO) Ecosystem Emerging Technologies ... Heat Flow + Air Flow + Water Flow Ventilation Thermal ... and related services 3. Enable buildings to ...

  12. LANSCE | Users | User Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Office LANSCE User Office and Visitor Center The LANSCE User Office is responsible for coordinating the users with LANSCE instrument scientist and the facility. Users contact the User Office weeks before they arrive at the LANSCE Visitor Center at Technical Area 53. Among their many responsibilities, the team issues the call for proposals, coordinates proposal experiment schedules, directs users to the training center, issues badges and dosimeters, helps to arrange tours of the facilities,

  13. Manufactured Homes Tool

    Energy Science and Technology Software Center (OSTI)

    2005-03-09

    The MH Tool software is designed to evaluate existing and new manufactured homes for structural adequacy in high winds. Users define design elements of a manufactured home and then select the hazard(s) for analysis. MH Tool then calculates and reports structural analysis results for the specified design and hazard Method of Solution: Design engineers input information (geometries, materials, etc.) describing the structure of a manufactured home, from which the software automatically creates a mathematical model.more » Windows, doors, and interior walls can be added to the initial design. HUD Code loads (wind, snow loads, interior live loads, etc.) are automatically applied. A finite element analysis is automatically performed using a third party solver to find forces and stresses throughout the structure. The designer may then employ components of strength (and cost) most appropriate for the loads that must be carried at each location, and then re-run the analysis for verification. If forces and stresses are still within tolerable limits (such as the HUD requirements), construction costs would be reduced without sacrificing quality.« less

  14. OFFICE OF THE CHIEF INFORMATION OFFICER (OCIO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    It is anticipated that the outcome of the 120-day study may ... control; i.e., medical emergencies, travel schedules, etc. ... Acting Director, Customer Care Office (IM-61). (FY 13 Q1 - ...

  15. Office of Strategic Programs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Strategic Programs STEAB Meeting JoAnn Milliken Washington, DC Acting Director June 27, 2012 Strategic Programs * Advanced Manufacturing * Sustainability Performance * Strategic ...

  16. Energy Department Helps Manufacturers of Small and Mid-Size Wind Turbines

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Meet Certification Requirements | Department of Energy Helps Manufacturers of Small and Mid-Size Wind Turbines Meet Certification Requirements Energy Department Helps Manufacturers of Small and Mid-Size Wind Turbines Meet Certification Requirements October 1, 2015 - 1:04pm Addthis Energy Department Helps Manufacturers of Small and Mid-Size Wind Turbines Meet Certification Requirements Mark Higgins Operations Supervisor, Wind & Water Power Technologies Office On October 1, the Energy

  17. Report to the President: Capturing a Domestic Competitive Advantage in Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    REPORT TO THE PRESIDENT CAPTURING A DOMESTIC COMPETITIVE ADVANTAGE IN ADVANCED MANUFACTURING Report of the Advanced Manufacturing Partnership Steering Committee Annex 2: Shared Infrastructure and Facilities Workstream Report Executive Office of the President President's Council of Advisors on Science and Technology JULY 2012 PREFACE In June 2011, the President established the Advanced Manufacturing Partnership (AMP), which is led by a Steering Committee that operates within the framework of the

  18. Report to the President: Capturing a Domestic Competitive Advantage in Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    REPORT TO THE PRESIDENT CAPTURING A DOMESTIC COMPETITIVE ADVANTAGE IN ADVANCED MANUFACTURING Report of the Advanced Manufacturing Partnership Steering Committee Annex 3: Education and Workforce Development Workstream Report Executive Office of the President President's Council of Advisors on Science and Technology JULY 2012 PREFACE In June 2011, the President established the Advanced Manufacturing Partnership (AMP), which is led by a Steering Committee that operates within the framework of the

  19. Fuel Oil Use in Manufacturing

    U.S. Energy Information Administration (EIA) Indexed Site

    logo Return to: Manufacturing Home Page Fuel Oil Facts Oil Price Effect Fuel Switching Actual Fuel Switching Storage Capacity Fuel Oil Use in Manufacturing Why Look at Fuel Oil?...

  20. Laser Manufacturing | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laser Manufacturing at GE Global Research Click to email this to a friend (Opens in new ... Laser Manufacturing at GE Global Research Learn how laser sintering, an additive laser ...

  1. February 2016 Office of Chief Financial Officer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 DOE/CF-0122 Volume 4 Science Advanced Research Projects Agency-Energy Department of Energy FY 2017 Congressional Budget Request February 2016 Office of Chief Financial Officer Volume 4 DOE/CF-0122 Volume 4 Science Advanced Research Projects Agency-Energy Printed with soy ink on recycled paper Department of Energy FY 2017 Congressional Budget Request Volume 4 Table of Contents Page Appropriation Account Summary

  2. February 2016 Office of Chief Financial Officer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 DOE/CF-0119 Volume 1 National Nuclear Security Administration Weapons Activities Defense Nuclear Nonproliferation Naval Reactors Federal Salaries and Expenses Department of Energy FY 2017 Congressional Budget Request February 2016 Office of Chief Financial Officer Volume 1 DOE/CF-0119 Volume 1 National Nuclear Security Administration Weapons Activities Defense Nuclear Nonproliferation Naval Reactors Federal Salaries and Expenses Printed with soy ink on recycled paper Department of Energy FY

  3. February 2016 Office of Chief Financial Officer

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 DOE/CF-0123 Volume 5 Environmental Management Department of Energy FY 2017 Congressional Budget Request February 2016 Office of Chief Financial Officer Volume 5 DOE/CF-0123 Volume 5 Environmental Management Printed with soy ink on recycled paper Department of Energy FY 2017 Congressional Budget Request Volume 5 FY 2017 Congressional Budget Justification Environmental Management Table of Contents Page Funding by Appropriation Summary

  4. Office of Personnel Management (OPM) Billing System PIA, Office...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Personnel Management (OPM) Billing System PIA, Office of Health, Safety and Security Office of Personnel Management (OPM) Billing System PIA, Office of Health, Safety and Security ...

  5. Energy 101: Clean Energy Manufacturing

    SciTech Connect (OSTI)

    2015-07-09

    Most of us have a basic understanding of manufacturing. It's how we convert raw materials, components, and parts into finished goods that meet our essential needs and make our lives easier. But what about clean energy manufacturing? Clean energy and advanced manufacturing have the potential to rejuvenate the U.S. manufacturing industry and open pathways to increased American competitiveness. Watch this video to learn more about this exciting movement and to see some of these innovations in action.

  6. NREL: Energy Analysis - Manufacturing Analysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recent Publications "Economic Measurements of Polysilicon for the Photovoltaic Industry: Market Competition and Manufacturing Competitiveness" IEEE Journal of Photovoltaics Supply Chain and Blade Manufacturing Considerations in the Global Wind Industry Economic Development Impact of 1,000 MW of Wind Energy in Texas Manufacturing Analysis With world-class manufacturing analysis capabilities, NREL analyzes clean energy industry trends; cost, price, and performance trends; market and

  7. ITP Nanomanufacturing: Nanomanufacturing Portfolio: Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Portfolio: Manufacturing Processes and Applications to Accelerate Commercial Use of Nanomaterials, January 2011 ITP Nanomanufacturing: Nanomanufacturing Portfolio: ...

  8. Energy 101: Clean Energy Manufacturing

    Broader source: Energy.gov [DOE]

    Most of us have a basic understanding of manufacturing. It's how we convert raw materials, components, and parts into finished goods that meet our essential needs and make our lives easier. But what about clean energy manufacturing? Clean energy and advanced manufacturing have the potential to rejuvenate the U.S. manufacturing industry and open pathways to increased American competitiveness. Watch this video to learn more about this exciting movement and to see some of these innovations in action.

  9. Revolutionizing Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engineering, and Mathematics -- education outreach at the Energy Department's ... National Network for Manufacturing Innovation pilot announcement. | Photo courtesy of ...

  10. Office of Information Resources

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Freedom of Information and Privacy Act Database Bureau: DOE-ID Project Unique ID: Date: May 8,2008 A. CONTACT INFORMATION 1. Who is the person completing this document? Nicole Brooks Title: FOIA/PA Officer Organization: DOE-ID Public Affairs Office Address: 1955 N. Fremont Ave, MS 1203 Idaho Falls, Idaho 83415 2. Who is the system owner? Nicole Brooks, FOIA/PA Officer U.S. DOE, Idaho Operations Office DOE-ID Public Affairs Office Address: 1955 N. Fremont Ave, MS 1203 Idaho Falls, Idaho 834 15 3.

  11. Related Links | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Related Links Related Links Private, public, and nonprofit organizations around the country offer a wide range of courses and other services to help you either improve your current skills or learn new ones. The sites featured here can help you find courses of specific interest as well as other information about training requirements for certain energy jobs. DOE Related Advanced Manufacturing Office: Training Find training sessions in your area and learn how to save energy in your manufacturing

  12. Out of bounds additive manufacturing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; et al

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  13. Out of Bounds Additive Manufacturing

    SciTech Connect (OSTI)

    Holshouser, Chris [Lockheed Martin Corporation; Newell, Clint [Lockheed Martin Corporation; Palas, Sid [Lockheed Martin Corporation; Love, Lonnie J [ORNL; Kunc, Vlastimil [ORNL; Lind, Randall F [ORNL; Lloyd, Peter D [ORNL; Rowe, John C [ORNL; Blue, Craig A [ORNL; Duty, Chad E [ORNL; Peter, William H [ORNL; Dehoff, Ryan R [ORNL

    2013-01-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing (AM) system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  14. MECS 2006 - All Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    All Manufacturing MECS 2006 - All Manufacturing Manufacturing Energy and Carbon Footprint - Sector: All Manufacturing (NAICS 31-33) with Total Energy Input, October 2012 (MECS 2006) All available footprints and supporting documents Manufacturing Energy and Carbon Footprint PDF icon All Manufacturing (NAICS 31-33) More Documents & Publications All Manufacturing (2010 MECS) MECS 2006 - Alumina and Aluminum MECS 2006 - Cement

  15. Advanced Methods for Manufacturing

    Energy Savers [EERE]

    R. Shane Johnson Deputy Assistant Secretary for Science and Technology Innovation (NE-4) December 11, 2015 Gateway for Accelerated Innovation in Nuclear GAIN 2 Accelerating Nuclear Tech to Market  Focus on technology commercialization * Coordinate internally with OTT, GC, contracting offices and others * Coordinate externally with utilities/other potential customers, reactor vendors, the research community, and NRC  Establish a nuclear "tech-to-market" technology accelerator

  16. All Manufacturing (2010 MECS) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    All Manufacturing (2010 MECS) All Manufacturing (2010 MECS) Manufacturing Energy and Carbon Footprint for All Manufacturing Sector (NAICS 31-33) Energy use data source: 2010 EIA MECS (with adjustments) Footprint Last Revised: June 2015 View footprints for other sectors here. Manufacturing Energy and Carbon Footprint PDF icon All Manufacturing More Documents & Publications MECS 2006 - All Manufacturing Cement (2010 MECS) Chemicals (2010 MECS) Manufacturing Energy Sankey Diagrams Manufacturing

  17. Office of Energy Efficiency and Renewable Energy FY 2014 Budget Rollout |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy FY 2014 Budget Rollout Office of Energy Efficiency and Renewable Energy FY 2014 Budget Rollout U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy fiscal year 2014 budget rollout document. PDF icon fy2014_eere_congressional_budget_request.pdf More Documents & Publications Office of Energy Efficiency and Renewable Energy Fiscal Year 2014 Budget Rollout - Energy Saving Homes, Buildings, and Manufacturing Office of Energy Efficiency and

  18. Colorado Industrial Energy Challenge | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    State and Utility Engagement Activities » Colorado Industrial Energy Challenge Colorado Industrial Energy Challenge Colorado The U.S. Department of Energy's (DOE's) Advanced Manufacturing Office (AMO; formerly the Industrial Technologies Program) has developed multiple resources and a Best Practices suite of tools to help industrial manufacturers reduce their energy intensity. AMO adopted the Energy Policy Act of 2005 objective of reducing industrial energy intensity 2.5% annually over the next

  19. Welcome: Dr. Sudarsan Rachuri | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Welcome: Dr. Sudarsan Rachuri Welcome: Dr. Sudarsan Rachuri February 29, 2016 - 4:25pm Addthis Sudarsan Rachuri The Advanced Manufacturing Office (AMO) is excited to welcome Dr. Sudarsan Rachuri as a Technology Manager in the R&D Facilities group as of February 22, 2016. Dr. Rachuri is an international expert in Smart Manufacturing and comes to AMO from National Institute of Standards and Technology (NIST), where he was an industrial engineer with the Life Cycle Engineering Group in the

  20. Recycling Building Foundation at the Weldon Spring, Missouri, Site |

    Energy Savers [EERE]

    Recent Publications Recent Publications The following list of recent publications from the Advanced Manufacturing Office (AMO) reflects the broad scope of AMO's activities. The publications cover both the ongoing support for innovation through research and development of new products and processes and the technical assistance to improve energy efficiency in manufacturing. June 19, 2015 Barriers to Industrial Energy Efficiency - Report to Congress, June 2015 This report examines barriers that

  1. Welcoming Remarks Imre Gyuk US Department of Energy

    Energy Savers [EERE]

    Welcome: Dr. Sudarsan Rachuri Welcome: Dr. Sudarsan Rachuri February 29, 2016 - 4:25pm Addthis Sudarsan Rachuri The Advanced Manufacturing Office (AMO) is excited to welcome Dr. Sudarsan Rachuri as a Technology Manager in the R&D Facilities group as of February 22, 2016. Dr. Rachuri is an international expert in Smart Manufacturing and comes to AMO from National Institute of Standards and Technology (NIST), where he was an industrial engineer with the Life Cycle Engineering Group in the

  2. Manufacturing Energy Consumption Survey (MECS) - Analysis & Projection...

    Gasoline and Diesel Fuel Update (EIA)

    Manufacturing Energy Consumption Data Show Large Reductions in Both Manufacturing Energy Use and the Energy Intensity of Manufacturing Activity between 2002 and 2010 MECS 2010 - ...

  3. Manufacturing Energy Consumption Survey (MECS) - Analysis & Projection...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    That increase in supply has in turn lowered the price of natural gas to manufacturers Manufacturing Energy Consumption Data Show Large Reductions in Both Manufacturing Energy Use ...

  4. Additive Manufacturing: Pursuing the Promise | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Fact sheet overviewing additive manufacturing techniques that are projected to exert a profound impact on manufacturing. Additive Manufacturing: Pursuing the Promise More Documents...

  5. FHP Manufacturing Company Geothermal | Open Energy Information

    Open Energy Info (EERE)

    FHP Manufacturing Company Geothermal Jump to: navigation, search Name: FHP Manufacturing Company: Geothermal Place: Florida Sector: Geothermal energy Product: FHP Manufacturing...

  6. Teksun PV Manufacturing Inc | Open Energy Information

    Open Energy Info (EERE)

    Teksun PV Manufacturing Inc Jump to: navigation, search Logo: Teksun PV Manufacturing Inc Name: Teksun PV Manufacturing Inc Address: 401 Congress Ave Place: Austin, Texas Zip:...

  7. Secure Manufacturing | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Secure Manufacturing Secure Manufacturing The depth and breadth of Y-12's manufacturing capabilities and expertise enable Y-12 to address current and emerging national security...

  8. WORKSHOP: SUSTAINABILITY IN MANUFACTURING AGENDA AND OVERVIEW...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WORKSHOP: SUSTAINABILITY IN MANUFACTURING AGENDA AND OVERVIEW WORKSHOP: SUSTAINABILITY IN MANUFACTURING AGENDA AND OVERVIEW PDF icon Sustainable Manufacturing Workshop Agenda.pdf ...

  9. Field Offices | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Field Office Programs for Workplace Disputes Field Office Programs for Workplace Disputes Each field office uses mediation to varying degrees to resolve their workplace disputes. For more information, contact Pamela Pontillo or the Employee Concerns Program Contacts (PDF) at each Field Office.

    Field Offices Field Offices Albuquerque U.S. Department of Energy Office of Inspector General P.O. Box 5400 Albuquerque, NM 87185-5400 Audit Services: (505) 845-5558 Inspections: (505) 845-5153 Office

  10. Kansas City Field Office Categorical Exclusion (CX) Determinations |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration Kansas City Field Office Categorical Exclusion (CX) Determinations To further transparency and openness in its implementation of the National Environmental Policy Act (NEPA), the Department of Energy has established a new policy with regard to the online posting of certain categorical exclusion determinations. Applicable determinations made by the Kansas City Field Office (KCFO) are listed below: 10/30/2012, Additive Manufacturing using EOSINT M280,

  11. OFFICE OF INSPECTOR GENERAL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    APP-005 Planning for and Measuring Office of Inspector General Results FY 2002 Annual Performance Report and FY 2003 Annual Performance Plan Office of Inspector General U.S. Department of Energy Inspector General's Message We are pleased to present the Office of Inspector General's (OIG) consolidated Fiscal Year 2002 Annual Performance Report and Fiscal Year 2003 Annual Performance Plan. This document evaluates our actual Fiscal Year (FY) 2002 performance and establishes the performance goals

  12. Office Of Nuclear Energy

    Energy Savers [EERE]

    Office Energy Checklist Office Energy Checklist This checklist outlines actions that conserve energy at the office. Checkbox Replace incandescent lights with compact fluorescent lights (CFLs) or light-emitting diodes (LEDs) for desk lamps and overhead lighting. Using CFLs instead of comparable incandescent bulbs can save about 50% on your lighting costs. CFLs use only one-fourth the energy and last up to 10 times longer. Checkbox Switch off all unnecessary lights. Use dimmers, motion sensors, or

  13. User Liaison Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Liaison Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? User Liaison Office User Liaison Home Users Group Program Advisory Committee User/Researcher Information print version ULO Services Driving in VA Housing Accomodations Office Space Student Affairs Office Telephone Services ULO Staff Lorelei Chopard User Liaison (ULO) (757) 269-6388 Bldg 12 L111 Hari Areti Head of

  14. Major Program Offices

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    101 Major Program Offices Doing Business with... Energy Efficiency and Renewable Energy Office of Environmental Management National Nuclear Security Administration Office of Science Gary G. Lyttek, Business Source Manager FY2010 DOE Procurement Base: $22.9B $1,556 $5,701 $9,523 $3,793 $2,304 $'s - Millions EE EM NNSA SC Other 2 Presentation for the DOE Small Business Conference EERE Funding Opportunity Announcements (FOA) May 2011 3 Office of Energy Efficiency and Renewable Energy 4 * The

  15. LANSCE | Training Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users User Office User Program LANSCE User Group Rosen Scholar Rosen Prize News & Multimedia News Multimedia Events Profiles Highlights Seminars Activity Reports The Pulse User ...

  16. Richland Operations Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    :4Tsc1 ~Richland, Washington 99352 December 18, 2009 CERTIFIED MAIL Ms. Shannon Dininny The Associated Press P.O. Box 1349 Yakima, Washington 98901 Dear Ms. Dininny: FREEDOM OF INFORMATION ACT REQUEST (FOI 20 10-00644) Your Freedom of Information Act (FOIA) request dated December 2, 2009, addressed to the U.S. Department of Energy, Headquarters FOJA Office has been forwarded to this office for response as well as to the DOE Office of Environmental Management (EM), the Oak Ridge Operations Office

  17. Nevada Site Office News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NNSA/NSO Office of Public Affairs http://www.nv.doe.gov P.O. Box 98518 Las Vegas, NV 89193-8518 News Media Contact: For Immediate Release: Darwin J. Morgan December 13, 2011 morgan@nv.doe.gov Kelly J. Snyder snyderk@nv.doe.gov 702-295-3521 New Support Services Contract Awarded for Nevada Site Office A new support services contract has been awarded at the National Nuclear Security Administration's Nevada Site Office. J.G. Management Systems, Inc., of Grand Junction, Colorado, will provide office

  18. Education Office Housing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Education Office Housing Housing A housing forum and listings for housing in and around Los Alamos. Contact Postdoc Housing Email LANL Students' Association Email LANL postdoc...

  19. Director, Geothermal Technologies Office

    Broader source: Energy.gov [DOE]

    The mission of the Geothermal Technologies Office (GTO) is to accelerate the development and deployment of clean, domestic geothermal resources that will promote a stronger, more productive economy...

  20. Solar Energy Technologies Office

    Broader source: Energy.gov [DOE]

    In 2011, the Energy Department's Solar Energy Technologies Office (SETO) became the SunShot Initiative, a collaborative national effort that aggressively drives innovation to make solar energy...

  1. Vehicle Technologies Office: News

    Broader source: Energy.gov [DOE]

    EERE intends to issue, on behalf of its Fuel Cell Technologies Office, a Funding Opportunity Announcement (FOA) entitled "Fuel Cell Technologies Incubator: Innovations in Fuel Cell and Hydrogen...

  2. Office of Physical Protection

    Broader source: Energy.gov [DOE]

    The Office of Physical Protection is comprised of a team of security specialists engaged in providing Headquarters-wide physical protection.

  3. Vehicle Technologies Office: Technologies

    Broader source: Energy.gov [DOE]

    To support DOE's goal to provide clean and secure energy, the Vehicle Technologies Office (VTO) invests in research and development that:

  4. Office of Legacy Management

    Office of Legacy Management (LM)

    Energy Office of Legacy Management JUL 1 0 2008 Alonso Ramirez, Scientific Director EI Verde Research Station Institute for Tropical Ecosystem Studies University of Puerto Rico...

  5. Office Buildings - Energy Consumption

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Consumption Office buildings consumed more than 17 percent of the total energy used by the commercial buildings sector (Table 4). At least half of total energy, electricity,...

  6. Sustainability Performance Office News

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    management-spo1461771 Sustainability Performance Office News en Executive Order 13693 Training Now Available On Demand http:energy.govmanagementspoarticles...

  7. About Research & Development

    Broader source: Energy.gov [DOE]

    Next-generation manufacturing technologies will transform industry and open new markets in the United States and around the world. The Advanced Manufacturing Office (AMO) supports Research and Development on technology projects that will help manufacturers become more robust, adaptable, profitable, and globally competitive.

  8. Wind Manufacturing Facilities | Department of Energy

    Energy Savers [EERE]

    Manufacturing Facilities Wind Manufacturing Facilities Wind Manufacturing Facilities America's wind energy industry supports a growing domestic industrial base. Check out this map to find manufacturing facilities in your state

  9. Oak Ridge Centers for Manufacturing Technology - The Manufacturing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Manufacturing Skills Campus Another of the inputs came from Garry Whitley, President of the Atomic Trades and Labor Council, since retired. Garry and I have worked together...

  10. Oak Ridge Centers for Manufacturing Technology ? The Manufacturing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Manufacturing Skills Campus Another of the inputs came from Garry Whitley, President of the Atomic Trades and Labor Council, since retired. Garry and I have worked together...

  11. Plumbing Manufacturer's Institute Ex Parte Communication Regarding...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plumbing Manufacturer's Institute Ex Parte Communication Regarding Showerheads Plumbing Manufacturer's Institute Ex Parte Communication Regarding Showerheads Letter to Department ...

  12. INDUSTRIAL SCALE DEMONSTRATION OF SMART MANUFACTURING ACHIEVING...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    INDUSTRIAL SCALE DEMONSTRATION OF SMART MANUFACTURING ACHIEVING TRANSFORMATIONAL ENERGY PRODUCTIVITY GAINS INDUSTRIAL SCALE DEMONSTRATION OF SMART MANUFACTURING ACHIEVING ...

  13. Nakagawa Electric Machinery Manufacturer | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Nakagawa Electric Machinery Manufacturer Place: Saku, Nagano, Japan Product: A company engages in electrical equipment manufacture. Coordinates:...

  14. ITP Nanomanufacturing: Manufacturing of Surfaces with Nanoscale...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing of Surfaces with Nanoscale and Microscale Features ITP Nanomanufacturing: Manufacturing of Surfaces with Nanoscale and Microscale Features PDF icon...

  15. Clean Energy Manufacturing Innovation Institute for Composites...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean Energy Manufacturing Innovation Institute for Composites Materials and Structures Clean Energy Manufacturing Innovation Institute for Composites Materials and Structures ...

  16. Advanced Battery Manufacturing Facilities and Equipment Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Advanced Battery Manufacturing Facilities and Equipment Program Advanced Battery Manufacturing Facilities and Equipment Program Fact ...

  17. American Energy and Manufacturing Competitiveness Summit Introduction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Addthis Description Introduction video for the American Energy and Manufacturing ... for the American Energy and Manufacturing Competetitiveness Summit Introduction video. ...

  18. Semiconductor Manufacturing International Corp SMIC | Open Energy...

    Open Energy Info (EERE)

    Manufacturing International Corp SMIC Jump to: navigation, search Name: Semiconductor Manufacturing International Corp (SMIC) Place: Shanghai, Shanghai Municipality, China Zip:...

  19. Manufacturing consumption of energy 1994

    SciTech Connect (OSTI)

    1997-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

  20. U.S. Solar Manufacturing Rising on the Horizon | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Manufacturing Rising on the Horizon U.S. Solar Manufacturing Rising on the Horizon January 29, 2015 - 2:35pm Addthis Solar demand in the U.S. is growing, and U.S. solar manufacturing is rising to meet the challenge.| Graphic courtesy of SunShot. Solar demand in the U.S. is growing, and U.S. solar manufacturing is rising to meet the challenge.| Graphic courtesy of SunShot. Dr. Lidija Sekaric Dr. Lidija Sekaric Solar Energy Technologies Office Director It's been a great year for the solar

  1. Advanced Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Advanced Manufacturing EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers

  2. Transformational Manufacturing | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transformational Manufacturing Argonne's new Advanced Battery Materials Synthesis and Manufacturing R&D Program focuses on scalable process R&D to produce advanced battery materials in sufficient quantity for industrial testing. The U.S. manufacturing industry consumes more than 30 quadrillion Btu of energy per year, directly employs about 12 million people and generates another 7 million jobs in related businesses. Argonne is working with industry to develop innovative and

  3. NREL: Energy Systems Integration - Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manufacturing Manufacturing capabilities at NREL support the production of components for fuel cells and electrochemical cells and the development of methods and technologies that will assist manufacturers of hydrogen and fuel cell technologies, as well as other renewable energy technologies, to scale up their production to meet national goals. Fuel cells cleanly and efficiently convert hydrogen into electricity through an electrochemical process. Fuel cells offer promise in a wide range of

  4. Office of Acquisition and Financial Assessment PIA, Golden Field Office |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Acquisition and Financial Assessment PIA, Golden Field Office Office of Acquisition and Financial Assessment PIA, Golden Field Office Office of Acquisition and Financial Assessment PIA, Golden Field Office PDF icon Office of Acquisition and Financial Assessment PIA, Golden Field Office More Documents & Publications Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Occupational Medicine - Assistant PIA, Idaho National Laboratory E-IDR

  5. Office of Sustainability Support

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Office of Sustainability Support serves as AUs organizational lead in partnering with the Departments Sustainability Performance Office to support the understanding and implementation of sustainability programs and requirements within the Department, including through supporting development and implementation of DOEs annual Strategic Sustainability Program Plan.

  6. Office of Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Safeguards, Security & Emergency Preparedness Office of Safeguards, Security & Emergency Preparedness Office of Safeguards, Security & Emergency Preparedness Mission Develop and oversee the implementation of policy and guidance with respect to security and emergency management. Foster continuous improvement across the Environmental Management (EM) complex through application of Integrated Safeguards and Security Management principles. Serve as a liaison with sites and

  7. Office of Business Operations

    Broader source: Energy.gov [DOE]

    The Office of Business Operations manages financial and acquisition management programs throughout the Associate Under Secretary for the Office of Environment, Health, Safety and Security (AU), including the formulation and execution of the AU budget; funding control and accounting activities; preparation of management studies; and provision of acquisition management support.

  8. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    Detailed Tables 28 Energy Information AdministrationManufacturing Consumption of Energy 1994 1. In previous MECS, the term "primary energy" was used to denote the "first use" of...

  9. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. 1 The manufacturing sector is composed of establishments classified...

  10. Manufacturing Spotlight: Boosting American Competitiveness

    Broader source: Energy.gov [DOE]

    Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient.

  11. The Clean Energy Manufacturing Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... projects that reduce the cost and risk of commercializing new technologies or ... manufacturing, data management, and operation of complex energy and communication systems. ...

  12. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    the CM, the ASM contains two components. The first component is the mail portion, a probability sample of manufacturing establishments selected from the list of establishments...

  13. The Clean Energy Manufacturing Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    by ensuring critical feedback from the production phase to invention and discovery. Additive manufacturing is just one of several technologies advanced by the Energy...

  14. Manufacturing Consumption of Energy 1994

    U.S. Energy Information Administration (EIA) Indexed Site

    Natural Gas to Residual Fuel Oil, by Industry Group and Selected Industries, 1994 369 Energy Information AdministrationManufacturing Consumption of Energy 1994 SIC Residual...

  15. High Pressure Hydrogen Tank Manufacturing

    Broader source: Energy.gov [DOE]

    Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

  16. Electrolyzer Manufacturing Progress and Challenges

    Broader source: Energy.gov [DOE]

    Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

  17. Manufacturing Fuel Cell Manhattan Project

    Broader source: Energy.gov [DOE]

    Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

  18. Vehicle Technologies Office: National Idling Reduction Network News |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy National Idling Reduction Network News Vehicle Technologies Office: National Idling Reduction Network News The National Idling Reduction Network brings together trucking and transit companies; railroads; ports; equipment manufacturers; Federal, state, and local government agencies (including regulators); nonprofit organizations; and national research laboratories to identify consistent, workable solutions to vehicle idling for the entire United States. Below is the most

  19. Radiological Laboratory, Utility, Office Building LEED Strategy & Achievement

    SciTech Connect (OSTI)

    Seguin, Nicole R.

    2012-07-18

    Missions that the Radiological Laboratory, utility, Office Building (RLUOB) supports are: (1) Nuclear Materials Handling, Processing, and Fabrication; (2) Stockpile Management; (3) Materials and Manufacturing Technologies; (4) Nonproliferation Programs; (5) Waste Management Activities - Environmental Programs; and (6) Materials Disposition. The key capabilities are actinide analytical chemistry and material characterization.

  20. Vehicle Technologies Office: National Idling Reduction Network News

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Archives | Department of Energy Idling Reduction Network News Archives Vehicle Technologies Office: National Idling Reduction Network News Archives The National Idling Reduction Network brings together trucking and transit companies; railroads; ports; equipment manufacturers; Federal, state, and local government agencies (including regulators); nonprofit organizations; and national research laboratories to identify consistent, workable solutions to heavy-vehicle idling for the entire United