Sample records for manufacturing industries employment

  1. Employment Forecasts for Ohio's Primary Metals Manufacturing and Administrative and Support Services Industries

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    that are outperforming the industry average. Additional research shows that the industry is reactive to manufacturingEmployment Forecasts for Ohio's Primary Metals Manufacturing and Administrative and Support, the primary metals manufacturing industry (NAICS 331000) employment in Ohio is forecasted to decline by 21

  2. Clean Energy Manufacturing Initiative Industrial Efficiency and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial...

  3. Industrial Scale Demonstration of Smart Manufacturing Achieving...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains Industrial Scale Demonstration of Smart Manufacturing Achieving...

  4. Geothermal industry employment: Survey results & analysis

    SciTech Connect (OSTI)

    Not Available

    2005-09-01T23:59:59.000Z

    The Geothermal Energy Association (GEA) is ofteh asked about the socioeconomic and employment impact of the industry. Since available literature dealing with employment involved in the geothermal sector appeared relatively outdated, unduly focused on certain activities of the industry (e.g. operation and maintenance of geothermal power plants) or poorly reliable, GEA, in consultation with the DOE, decided to conduct a new employment survey to provide better answers to these questions. The main objective of this survey is to assess and characterize the current workforce involved in geothermal activities in the US. Several initiatives have therefore been undertaken to reach as many organizations involved in geothermal activities as possible and assess their current workforce. The first section of this document describes the methodology used to contact the companies involved in the geothermal sector. The second section presents the survey results and analyzes them. This analysis includes two major parts. The first part analyzes the survey responses, presents employment numbers that were captured and describes the major characteristics of the industry that have been identified. The second part of the analysis estimates the number of workers involved in companies that are active in the geothermal business but did not respond to the survey or could not be reached. Preliminary conclusions and the study limits and restrictions are then presented. The third section addresses the potential employment impact related to manufacturing and construction of new geothermal power facilities. Indirect and induced economic impacts related with such investment are also investigated.

  5. Faculty of Engineering Industrial and Manufacturing

    E-Print Network [OSTI]

    Faculty of Engineering Industrial and Manufacturing Systems Engineering Industrial engineers answer the needs of organizations to operate efficiently and cost effectively. As an industrial engineer, you may of Windsor is one of only a few institutions in Ontario to offer industrial engineering. Your education

  6. Advanced Manufacturing Office (Formerly Industrial Technologies Program)

    E-Print Network [OSTI]

    Advanced Manufacturing Office (Formerly Industrial Technologies Program) Leo Christodoulou Jamie August 11, 2011 #12;Background and Opportunity Background Industry accounts for 30% of energy consumption-value industries such as the renewable energy industry. Example materials include low-cost carbon fiber, low

  7. Graduate Programs in Industrial and Manufacturing Engineering The industrial and manufacturing (IME) department at WSU

    E-Print Network [OSTI]

    ; occupational safety and other industrial hygiene issues; and ergonomics and human factors issues in aviationGraduate Programs in Industrial and Manufacturing Engineering The industrial and manufacturing (IME programs in industrial engineering (MSIE and PhDIE, respectively). The department also offers four graduate

  8. AMO Industry Day Workshop on Upcoming Smart Manufacturing FOA

    Broader source: Energy.gov [DOE]

    AMO will host an Industry Day workshop to explain the concept, vision, and technology needs associated with support for a Clean Energy Manufacturing Innovation Institute on Smart Manufacturing.

  9. Education for the ManufacturingEducation for the Manufacturing Industries of the FutureIndustries of the Future

    E-Print Network [OSTI]

    Brock, David

    Growth. Every $1.00 in manufactured goods generates an additional $1.43 worth of additional economic© ATI 2006 Education for the ManufacturingEducation for the Manufacturing Industries of the FutureIndustries of the Future presented to thepresented to the 2006 MIT Manufacturing Summit:2006 MIT Manufacturing Summit

  10. Integrated Design and Manufacturing of Cost-Effective & Industrial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cost-Effective & Industrial-Scalable TEG for Vehicle Applications Integrated Design and Manufacturing of Cost-Effective & Industrial-Scalable TEG for Vehicle Applications...

  11. Industrial Scale Demonstration of Smart Manufacturing Achieving...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains Development of an Open Architecture, Widely Applicable Smart Manufacturing...

  12. AMO Industry Day Workshop, February 25th, Targets Smart Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Addthis AMO will host an Industry Day workshop to explain the concept, vision, and technology needs associated with support for a Clean Energy Manufacturing Innovation Institute...

  13. Industrial Activities at DOE: Efficiency, Manufacturing, Process...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials R&D More Documents & Publications Fiber Reinforced Polymer Composite Manufacturing Workshop Advanced Manufacturing Office Overview Microwave and Radio Frequency Workshop...

  14. Early career development in the sport industry: factors affecting employment

    E-Print Network [OSTI]

    Hutchinson, Michael Daniel

    2009-05-15T23:59:59.000Z

    The purpose of this study is to identify the processes and factors contributing to employment in the sport industry. In order to completely address the sport industry as a whole, sport management has been pragmatically divided into five sub...

  15. Applications of industrial ecology : manufacturing, recycling, and efficiency

    E-Print Network [OSTI]

    Dahmus, Jeffrey B. (Jeffrey Brian), 1974-

    2007-01-01T23:59:59.000Z

    This work applies concepts from industrial ecology to analyses of manufacturing, recycling, and efficiency. The first part focuses on an environmental analysis of machining, with a specific emphasis on energy consumption. ...

  16. Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity

    ScienceCinema (OSTI)

    Selldorff, John; Atwell, Monte

    2014-12-03T23:59:59.000Z

    Industrial efficiency and low-cost energy resources are key components to increasing U.S. energy productivity and makes the U.S. manufacturing sector more competitive. Companies find a competitive advantage in implementing efficiency technologies and practices, and technologies developed and manufactured in the U.S. enable greater competitiveness economy-wide.

  17. Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity

    SciTech Connect (OSTI)

    Selldorff, John; Atwell, Monte

    2014-09-23T23:59:59.000Z

    Industrial efficiency and low-cost energy resources are key components to increasing U.S. energy productivity and makes the U.S. manufacturing sector more competitive. Companies find a competitive advantage in implementing efficiency technologies and practices, and technologies developed and manufactured in the U.S. enable greater competitiveness economy-wide.

  18. Centers for manufacturing technology: Industrial Advisory Committee Review

    SciTech Connect (OSTI)

    NONE

    1995-10-01T23:59:59.000Z

    An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

  19. Simultaneous Tolerance Synthesis for Manufacturing and Quality B. Ye, Department of Industrial and Manufacturing Systems Engineering

    E-Print Network [OSTI]

    Salustri, Filippo A.

    to component dimension i CT total cost of manufacturing and quality Cpi capability index of last process, and quality, for the sake of achieving a minimal total cost and reducing lead-time. However, in existing workSimultaneous Tolerance Synthesis for Manufacturing and Quality B. Ye, Department of Industrial

  20. The photovoltaic manufacturing technology project: A government/industry partnership

    SciTech Connect (OSTI)

    Mitchell, R.L.; Witt, C.E.; Mooney, G.D.

    1991-12-01T23:59:59.000Z

    The Photovoltaic Manufacturing Technology (PVMaT) project is a government/industry photovoltaic manufacturing research and development (R&D) project composed of partnerships between the federal government (through the US Department of Energy) and members of the US photovoltaic (PV) industry. It is designed to assist the US PV industry in improving manufacturing processes, accelerating manufacturing cost reductions for PV modules, increasing commercial product performance, and generally laying the groundwork for a substantial scale-up of US-based PV manufacturing plant capabilities. The project is being carried out in three separate phases, each focused on a specific approach to solving the problems identified by the industrial participants. These participants are selected through competitive procurements. Furthermore, the PVMaT project has been specifically structured to ensure that these PV manufacturing R&D subcontract awards are selected with no intention of either directing funding toward specific PV technologies (e.g., amorphous silicon, polycrystalline thin films, etc.), or spreading the awards among a number of technologies (e.g., one subcontract in each area). Each associated subcontract under any phase of this project is, and will continue to be, selected for funding on its own technical and cost merits. Phase 1, the problem identification phase, was completed early in 1991. Phase 2 is now under way. This is the solution phase of the project and addresses problems of specific manufacturers. The envisioned subcontracts under Phase 2 may be up to three years in duration and will be highly cost-shared between the US government and US industrial participants. Phase 3, is also under way. General issues related to PV module development will be studied through various teaming arrangements. 25 refs.

  1. Dickten & Masch Manufacturing Company: Industrial Energy Assessment Achieves $35,000 in Cost Savings for Plastics Manufacturer

    SciTech Connect (OSTI)

    Not Available

    2005-09-01T23:59:59.000Z

    Industrial Technologies Program's BestPractices case study based on a comprehensive plant assessment conducted at the Dickten & Masch Manufacturing Company by ITP's Industrial Assessment Center in conjunction with The Society of the Plastics Industry, Inc.

  2. Industrialization and manufacturing steps within the Global Product Lifecycle context

    E-Print Network [OSTI]

    Boyer, Edmond

    steps within the Product Life cycle Management (PLM) context. Initially, PLM was focused almost. In the same time, the industrialization and the manufacturing are not sufficiently integrated into the PLM solutions. Actually, there is much to be gained by extending the coverage of PLM to production stage

  3. Energy resource management for energy-intensive manufacturing industries

    SciTech Connect (OSTI)

    Brenner, C.W.; Levangie, J.

    1981-10-01T23:59:59.000Z

    A program to introduce energy resource management into an energy-intensive manufacturing industry is presented. The food industry (SIC No. 20) was chosen and 20 companies were selected for interviews, but thirteen were actually visited. The methodology for this program is detailed. Reasons for choosing the food industry are described. The substance of the information gained and the principal conclusions drawn from the interviews are given. Results of the model Energy Resource Management Plan applied to three companies are compiled at length. Strategies for dissemination of the information gained are described. (MCW)

  4. Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report

    SciTech Connect (OSTI)

    Azimi, S.A.; Conrad, J.L.; Reed, J.E.

    1985-03-01T23:59:59.000Z

    Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

  5. Development of a performance-based industrial energy efficiency indicator for cement manufacturing plants.

    SciTech Connect (OSTI)

    Boyd, G.; Decision and Information Sciences

    2006-07-21T23:59:59.000Z

    Organizations that implement strategic energy management programs have the potential to achieve sustained energy savings if the programs are carried out properly. A key opportunity for achieving energy savings that plant managers can take is to determine an appropriate level of energy performance by comparing the plant performance with that of similar plants in the same industry. Manufacturing plants can set energy efficiency targets by using performance-based indicators. The U.S. Environmental Protection Agency (EPA), through its ENERGY STAR{reg_sign} program, has been developing plant energy performance indicators (EPIs) to encourage a variety of U.S. industries to use energy more efficiently. This report describes work with the cement manufacturing industry to provide a plant-level indicator of energy efficiency for assembly plants that produce a variety of products, including Portland cement and other specialty cement products, in the United States. Consideration is given to the role that performance-based indicators play in motivating change; the steps needed to develop indicators, including interacting with an industry to secure adequate data for an indicator; and the actual application and use of an indicator when complete. How indicators are employed in the EPA's efforts to encourage industries to voluntarily improve their use of energy is discussed as well. The report describes the data and statistical methods used to construct the EPI for cement manufacturing plants. Individual equations are presented, as are the instructions for using them in an associated Excel spreadsheet.

  6. Haiti: energy efficiency in the sugar and manufacturing industries

    SciTech Connect (OSTI)

    Streicher, A.

    1985-03-28T23:59:59.000Z

    A review of energy use in Haiti, aimed at identifying possible projects to complement current A.I.D. support for institution building and energy planning within the Ministry of Mines and Energy Resources (MMRE), is presented. Key findings are that: (1) the sugar and manufacturing industries rely heavily on biomass fuels - wood, charcoal, and bagasse (sugar cane residue); and (2) demand for commercial energy and for electricity is growing rapidly despite supply constraints. The report calls for A.I.D. to: initiate a program to reduce biomass consumption (which is causing severe soil erosion and deforestation), especially in the small distilleries called guildives; collaborate with MMRE and the World Bank to develop a detailed workplan to promote energy efficiency in the guildives, focusing on technology development; help MMRE and the private sector to project Haiti's industrial energy and electricity needs through the year 2000; and sponsor a program of energy audits and efficiency improvements in the manufacturing sector.

  7. China's Industrial Carbon Dioxide Emissions in Manufacturing Subsectors and in Selected Provinces

    E-Print Network [OSTI]

    Lu, Hongyou

    2013-01-01T23:59:59.000Z

    EIA) conducts the Manufacturing Energy Consumption Survey (survey conducted in 2011. The 2006 MECS surveyed industrial establishments, and allowed EIA

  8. Automated Tuning of a Vision-based Inspection System for Industrial Food Manufacturing

    E-Print Network [OSTI]

    Payeur, Pierre

    Automated Tuning of a Vision-based Inspection System for Industrial Food Manufacturing Mai Moussa. INTRODUCTION For several years, the food industry has adopted automated vision-based inspection systems Ottawa, Canada [m.chetima, ppayeur]@uottawa.ca Abstract--Quality control in industrial food manufacturing

  9. Manufacturing Industrial Development for the Alternative Energy Systems-Final Report

    SciTech Connect (OSTI)

    Dr. Chuck Ryan, National Center for Manufacturing Sciences; Dr. Dawn White, Accio Energy; Mr. Duncan Pratt, General Electric Global Research

    2013-01-30T23:59:59.000Z

    NCMS identified and developed critical manufacturing technology assessments vital to the affordable manufacturing of alternative-energy systems. NCMS leveraged technologies from other industrial sectors and worked with our extensive member organizations to provide DOE with two projects with far-reaching impact on the generation of wind energy. In the response for a call for project ideas, 26 project teams submitted ideas. Following a detailed selection criteria, two projects were chosen for development: Advanced Manufacturing for Modular Electro-kinetic (E-K) Wind Energy Conversion Technology - The goal of this project was to demonstrate that a modular wind energy technology based on electrohydrodynamic wind energy principles and employing automotive heritage high volume manufacturing techniques and modular platform design concepts can result in significant cost reductions for wind energy systems at a range of sizes from 100KW to multi-MW. During this program, the Accio/Boeing team made major progress on validating the EHD wind energy technology as commercially viable in the wind energy sector, and moved along the manufacturing readiness axis with a series of design changes that increased net system output. Hybrid Laser Arc Welding for Manufacture of Wind Towers - The goal of this research program was to reduce the cost of manufacturing wind towers through the introduction of hybrid laser arc welding (HLAW) into the supply chain for manufacturing wind towers. HLAW has the potential to enhance productivity while reducing energy consumption to offset the foreign low-cost labor advantage and thereby enhance U.S. competitiveness. HLAW technology combines laser welding and arc welding to produce an energy efficient, high productivity, welding process for heavy manufacturing. This process leverages the ability of a laser to produce deep weld penetration and the ability of gas metal arc welding (GMAW) to deposit filler material, thereby producing stable, high quality, welds on joints with gaps and mismatches typical of those seen in heavy manufacturing. Wind towers utilize varying thicknesses of steel throughout their structures to meet the mechanical load requirements while keeping material costs low. A typical tower might have as many as twelve different material thicknesses. Joining each thickness requires a unique joint design and welding approach to enable the management of quality, productivity, and mechanical properties. In this program, laser joining of materials with thicknesses ranging from 12mm to 35mm were evaluated against the standard quality and mechanical requirements for General Electric wind tower components. The joining processes demonstrated showed the ability to meet key requirements with the appropriate process controls in place.

  10. The impact of manufacturing offshore on technology development paths in the automotive and optoelectronics industries

    E-Print Network [OSTI]

    Fuchs, Erica R. H. (Erica Renee H.), 1977-

    2006-01-01T23:59:59.000Z

    This dissertation presents a two-case study of the impact of manufacturing offshore on the technology trajectory of the firm and the industry. It looks in particular at the automotive and optoelectronics industries. The ...

  11. Surveys on Mathematics for Industry 5 (1995) 2733 Improving manufacturing quality

    E-Print Network [OSTI]

    Pukelsheim, Friedrich

    that Quality Engineering is part of a more embracing concept, total quality management. Section 3 on PlannedSurveys on Mathematics for Industry 5 (1995) 27­33 Improving manufacturing quality through planned experimentation is a powerful tool to improve quality of industrial manufacturing processes, in an environment

  12. Mortality of workers employed at organochlorine pesticide manufacturing plants: An update

    SciTech Connect (OSTI)

    Brown, D.P.

    1991-07-01T23:59:59.000Z

    A mortality study of workers at four organochlorine pesticide manufacturing factories was updated through 1987. The cohorts included all white male workers employed for at least 6 months before December 31, 1964 at the four factories. The workers had been exposed to the following organochlorine pesticides: chlordane, heptachlor, endrin, aldrin, dieldrin, and dichlorodiphenyltrichloroethane (DDT). Workers at one factory had been exposed to the organobromine pesticide dibromochloropropane. The total number of deaths for the period from 1976 through 1987 was 650. Mortality for all causes and all malignant neoplasms was lower than expected at each of the factories. Cerebrovascular disease mortality was elevated for three of the four factories. The most important result was the statistically significant increase in liver/biliary tract cancer among workers at the facility where aldrin and dieldrin were the primary organochlorine pesticides produced and the nonsignificant increase at the facility where DDT was manufactured.

  13. New urban manufacturing neo-industrial design in Louisville, Kentucky

    E-Print Network [OSTI]

    Rhie, Christopher

    2014-01-01T23:59:59.000Z

    American manufacturing is experiencing a modest renaissance. U.S. firms are choosing to re-shore manufacturing jobs not out of their sense of patriotism, but because it makes good business sense. The costs of transportation ...

  14. Center for Sustainable Industry and Manufacturing | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    system design, development, testing, and evaluation. Major R&D areas include large scale additive manufacturing as well as closed loop control; energy efficient and mesoscale...

  15. Measuring the Intangible Aspects of the Manufacturing Strategy A Case study from the Automotive Industry

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    on principles from different paradigms. From our case in the automotive industry we see that the company should, manufacturing strategy, automotive industry 1 Introduction The network- and knowledge-based economy. This is illustrated through a case from a supplier in the automotive industry. The case is based on documents

  16. Superior Processes at Industrial Equipment Manufacturers Benchmark best practices and performances for next-generation success

    E-Print Network [OSTI]

    Narasayya, Vivek

    Superior Processes at Industrial Equipment Manufacturers Benchmark best practices and performances invest time, effort and resources in establishing the best practices, technology systems and solutions at a pace faster than the competition. · Engaged people/human capital acquisition, development

  17. Highlights of Industrial Energy Audits with Application in Paper Product Manufacturing

    E-Print Network [OSTI]

    Hart, M. N.; Bond, S. K.

    1979-01-01T23:59:59.000Z

    Experience in executing comprehensive energy audits in varied industrial plants has resulted in a basic audit methodology and has revealed several interesting energy conservation opportunities applicable to paper products manufacturing. The most...

  18. Industrial Sector Energy Demand: Revisions for Non-Energy-Intensive Manufacturing (released in AEO2007)

    Reports and Publications (EIA)

    2007-01-01T23:59:59.000Z

    For the industrial sector, the Energy Information Administration's (EIA) analysis and projection efforts generally have focused on the energy-intensive industriesfood, bulk chemicals, refining, glass, cement, steel, and aluminumwhere energy cost averages 4.8% of annual operating cost. Detailed process flows and energy intensity indicators have been developed for narrowly defined industry groups in the energy-intensive manufacturing sector. The non-energy-intensive manufacturing industries, where energy cost averages 1.9% of annual operating cost, previously have received somewhat less attention, however. In Annual Energy Outlook 2006 (AEO), energy demand projections were provided for two broadly aggregated industry groups in the non-energy-intensive manufacturing sector: metal-based durables and other non-energy-intensive. In the AEO2006 projections, the two groups accounted for more than 50% of the projected increase in industrial natural gas consumption from 2004 to 2030.

  19. Monitoring the resin infusion manufacturing process under industrial environment using distributed sensors

    E-Print Network [OSTI]

    Boyer, Edmond

    1 Monitoring the resin infusion manufacturing process under industrial environment using the Liquid Resin Infusion process under industrial environment is proposed. To detect the resin front; Liquid Resin Infusion. #12;2 1. Introduction Recently, Liquid Composite Molding (LCM) processes have been

  20. The Impact of Manufacturing Offshore on Technology Development Paths in the Automotive and Optoelectronics Industries

    E-Print Network [OSTI]

    de Weck, Olivier L.

    Development Paths in the Automotive and Optoelectronics Industries by Erica R.H. Fuchs Submitted in particular at the automotive and optoelectronics industries. The dissertation uses an innovative combinationThe Impact of Manufacturing Offshore on Technology Development Paths in the Automotive

  1. Estimates of emergency operating capacity in US manufacturing and nonmanufacturing industries

    SciTech Connect (OSTI)

    Belzer, D.B. (Pacific Northwest Lab., Richland, WA (USA)); Serot, D.E. (D/E/S Research, Richland, WA (USA)); Kellogg, M.A. (ERCE, Inc., Portland, OR (USA))

    1991-03-01T23:59:59.000Z

    Development of integrated mobilization preparedness policies requires planning estimates of available productive capacity during national emergency conditions. Such estimates must be developed in a manner that allows evaluation of current trends in capacity and the consideration of uncertainties in various data inputs and in engineering assumptions. This study, conducted by Pacific Northwest Laboratory (PNL), developed estimates of emergency operating capacity (EOC) for 446 manufacturing industries at the 4-digit Standard Industrial Classification (SIC) level of aggregation and for 24 key non-manufacturing sectors. This volume presents tabular and graphical results of the historical analysis and projections for each SIC industry. (JF)

  2. Abstract--The increasing competitiveness in manufacturing industry is forcing manufacturers to seek effective processing

    E-Print Network [OSTI]

    Mustakerov, Ivan

    plant problem. Different processing schedules variants for different technological restrictions were, so they must rely on innovative approaches in all aspects of manufacturing technology. As a result existing results in the literature focus on either a single machine or several identical machines [5

  3. Enabling the Future of Industry in the United States The US manufacturing industry is a cornerstone of the American

    E-Print Network [OSTI]

    . ORNL researchers are developing a new generation of carbon fiber composite materials and lightweight of energy and industrial applications. New carbon materials are enabling cleanup of contaminated water competitiveness. Manufacturing and materials research at Oak Ridge National Laboratory is focused on reducing

  4. Lost Opportunities in Industrial Energy Efficiency: New Production Lean Manufacturing and Lean Energy

    E-Print Network [OSTI]

    Seryak, J.; Epstein, G.; D'Antonio, M.

    2006-01-01T23:59:59.000Z

    companies regularly increase production by adding additional manufacturing equipment, or increasing operating hours. This approach can add large new energy loads to the electrical grid and gas distribution networks. Alternately, increasing production...Lost Opportunities in Industrial Energy Efficiency: New Production, Lean Manufacturing and Lean Energy John Seryak Gary Epstein Mark D’Antonio Engineer jseryak@ers-inc.com President gepstein@ers-inc.com Vice President mdantonio...

  5. Industrialization and manufacturing steps within the Global Product Lifecycle context

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    steps within the Product Life cycle Management (PLM) context. Initially, PLM was focused almost. In the same time, the industrialization and the production are not sufficiently integrated into the PLM solutions. Currently, there is much to be gained by extending the coverage of PLM to production step

  6. Is Rising Earnings Inequality Associated with Increased Exploitation? Evidence for U.S. Manufacturing Industries, 1971–1996

    E-Print Network [OSTI]

    Sakamoto, Arthur; Kim, ChangHwan

    2010-01-01T23:59:59.000Z

    Is the trend towards rising earnings inequality associated with increased exploitation? The authors investigate exploitation among workers using data for manufacturing industries. Defined as the underpayment of earnings ...

  7. Walk-through survey report: Control technology for metal reclamation industries at East Penn Manufacturing Company Inc. , Lyon Station, Pennsylvania

    SciTech Connect (OSTI)

    Hall, R.M.

    1994-08-12T23:59:59.000Z

    A walk through survey was conducted at the East Penn Manufacturing Company (SIC-3341), Lyon Station, Pennsylvania to identify and evaluate potentially effective controls and work practices in the lead (7439921) reclamation industry. The facility was a secondary lead smelter which operated 7 days a week, and recycled about 20,000 batteries a day, primarily automobile batteries. The company employed automation, local exhaust ventilation, partial enclosures, and enclosed ventilation systems in the reverberatory furnace operations, blast furnace operations, and casting and refinery area to reduce employee exposure to lead. The arsenic (7440382) personal exposure time weighted averages ranged from 0.10 to 1.14 microg/cubic m in the industrial battery breaking area and ranged from nondetected to 6.16 microg/cubic m in the alloying/pots area.

  8. Supply Chain and Blade Manufacturing Considerations in the Global Wind Industry (Presentation)

    SciTech Connect (OSTI)

    James, T.; Goodrich, A.

    2013-12-01T23:59:59.000Z

    This briefing provides an overview of supply chain developments in the global wind industry and a detailed assessment of blade manufacturing considerations for U.S. end-markets. The report discusses the international trade flows of wind power equipment, blade manufacturing and logistical costs, and qualitative issues that often influence factory location decisions. To help guide policy and research and development strategy decisions, this report offers a comprehensive perspective of both quantitative and qualitative factors that affect selected supply chain developments in the growing wind power industry.

  9. Energy Analysis and Diagnostics Data Analysis From Industrial Energy Assessments for Manufacturing Industries

    E-Print Network [OSTI]

    Gopalakrishnan, B.; Plummer, R. W.; Srinath, S.; Meffe, C. M.; Ipe, J. J.; Veena, R.

    . The data shows the types of industries in our geographical area which have benefited from the industrial assessments and outlines the relationships between these industry types and variables such as energy consumption, types of recommendations, sales, plant...

  10. The Results (Lessons Learned) of More than 110 Energy Audits for Manufacturers by the Louisiana Industrial Assessment Center 

    E-Print Network [OSTI]

    Kozman, T.; Davies, T.; Reynolds, C.; O'Quin, R.; DaCosta, J.; Galti, T.; Pechon, C.; Stutes, K.

    2005-01-01T23:59:59.000Z

    and conducted its first industrial energy assessment in December 2000. In this paper we present the results of this energy assessment and those of 112 more through August 2004. By industrial type, these assessments were for: Oilfield Equipment Manufacturing (23...

  11. Admission and Employment Information

    E-Print Network [OSTI]

    Huang, Jianyu

    10% Finance 9% Computer Science/Info Systems 6% Other 8% Manufacturing 7% Bio/Pharma/Health Care 7 class of 2011 employment by industry mba class of 2011 employment by function representative list Company General Mills Hasbro, Inc. Houghton Mifflin Harcourt IBM Global Services Johnson & Johnson Jones

  12. Assessment of Current Trends in Computer-aided Design and Manufacturing In The Furniture Industry

    E-Print Network [OSTI]

    contemporary trends in manufacturing can be put under the general heading of concurrent engineering. This term into issues of keeping U.S. industry competitive in the global marketplace. Concurrent engineering is less and to look at how engineering graphics curriculums can evolve to help train engineers and technologists

  13. Energy Use in the Australian Manufacturing Industry: An Analysis of Energy Demand Elasticity

    E-Print Network [OSTI]

    Energy Use in the Australian Manufacturing Industry: An Analysis of Energy Demand Elasticity Chris in this paper. Energy consumption data was sourced from the Bureau of Resources and Energy Economics' Australian Energy Statistics publication. Price and income data were sourced from the Australian Bureau

  14. Department of Industrial and Manufacturing Engineering Fall 2011 The Center for Integrated Healthcare Delivery Systems (CIHDS) Academy

    E-Print Network [OSTI]

    Demirel, Melik C.

    PENNSTATE Department of Industrial and Manufacturing Engineering Fall 2011 The Center is to educate young adults about the field of Industrial Engineering through learning modules and examples that focus on the healthcare industry. The learning modules shall utilize Industrial Engineering concepts

  15. Current and future industrial energy service characterizations. Volume II. Energy data on the US manufacturing subsector

    SciTech Connect (OSTI)

    Krawiec, F.; Thomas, T.; Jackson, F.; Limaye, D.R.; Isser, S.; Karnofsky, K.; Davis, T.D.

    1980-10-01T23:59:59.000Z

    In order to characterize industrial energy service, current energy demand, its end uses, and cost of typical energy applications and resultant services in the industrial sector were examined and a projection of state industrial energy demands and prices to 1990 was developed. Volume II presents in Section 2 data on the US manufacturing subsector energy demand, intensity, growth rates, and cost for 1971, 1974, and 1976. These energy data are disaggregated not only by fuel type but also by user classifications, including the 2-digit SIC industry groups, 3-digit subgroups, and 4-digit SIC individual industries. These data characterize typical energy applications and the resultant services in this subsector. The quantities of fuel and electric energy purchased by the US manufacturing subsector were converted to British thermal units and reported in billions of Btu. The conversion factors are presented in Table 4-1 of Volume I. To facilitate the descriptive analysis, all energy cost and intensity data were expressed in constant 1976 dollars. The specific US industrial energy service characteristics developed and used in the descriptive analysis are presented in Volume I. Section 3 presents the computer program used to produce the tabulated data.

  16. Employment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasRelease Date:researchEmerging Threats andRetireesEmployment

  17. The Results of More Than 250 Industrial Assessments for Manufacturing by the Louisiana Industrial Assessment Center for the Past Ten Years

    E-Print Network [OSTI]

    Kozman, T.; Lee, J.

    2010-01-01T23:59:59.000Z

    The Results (Lessons Learned) of more than 250 E nergy Audits (Industrial Assessments) for Manufacturers by the Louisiana Industrial Assessment Center for the past Ten Years Theodore Kozman Jim Lee Director Deputy Director... Industrial Assessment Center University of Louisiana Lafayette Abstrac t This paper and discussion presents the summary and results of energy audits or assessments conducted by the University of Louisiana Lafayette Industrial Assessment Center...

  18. N-K Manufacturing Technologies: Industrial Energy Assessment Yields Savings of More than $27,000 Per Year for Molded Plastics Company

    SciTech Connect (OSTI)

    Not Available

    2005-09-01T23:59:59.000Z

    Industrial Technologies Program's BestPractices case study based on a comprehensive plant assessment conducted at N-K Manufacturing Technologies by ITP's Industrial Assessment Center in conjunction with The Society of the Plastics Industry, Inc.

  19. A technique to measure the effectiveness of "OSHA" in American manufacturing industry

    E-Print Network [OSTI]

    Pietrini, Luis Alejandro

    1983-01-01T23:59:59.000Z

    lmore (Chai rman of Committee) Dr. Alberto Garcia-Diaz (Member) Mr. Harr eggs (Member) Newto . Ellis (Head of Department) AUGUST 1983 ABSTRACT A Technique to Measure the Effectiveness of "OSHA" in American Manufacturing Industry. (August 1983... of the planning and execution of th1s research. I would also like to thank Dr. Alberto Garc1a and Mr. Harry Suggs for the assistance received in the performance of this study. I am also in debt to Dr. Ralph Vernon, whose encouragement and instructive...

  20. Identifying Employment Structure and Training Needs In the Louisiana Value-Added Wood Products Industry

    E-Print Network [OSTI]

    in Manufacturing Today ___________________________ 62 Most Pressing Issues in Manufacturing in 5 Years ................................................................................70 VI. References and Additional Literature..........................................................................71 References _____________________________________________________ 71 Additional Literature

  1. Implementation of Brownfield Initiative transforming a former steel manufacturing site into an industrial park

    SciTech Connect (OSTI)

    Salguero, J.P.; Quinlisk, J.M.

    1996-12-31T23:59:59.000Z

    The concept of Brownfield Redevelopment, or Land Recycling, alleviates the pressure to develop new sites while leaving former industrial sites dormant. This case history discusses the environmental methodology used to transform a former steel manufacturing facility into an industrial park. The investigation and remediation work was performed while the Pennsylvania`s Land Recycling and Environmental Remediation Standards Act (Act 2) was being developed. The Beaver County Corporation for Economic development (BCCED) purchased a former LTV manufacturing facility in Aliquippa, PA. Down gradient of the sites are the intakes of drinking water wells that supply the city of Akiquippa. Phase 1, 2 and 3 Environmental Site Assessments (ESAs) identified polychlorinated biphenyls (PCBs), petroleum hydrocarbons (TPHs), asbestos and heavy metal contamination. The groundwater assessment revealed traces of chlorinated compounds. An accelerated remedial investigation and focused feasibility study (RI/FFS) determined environmental and economic risks. Innovative and statistical techniques were used in the preparation of investigation workplans. Multiple media were samples. Complementary investigation phases were performed affording time for the regulatory agencies to interface with the engineer and owner. The use of a combined remedial actions derived from the proposed end-use proved to be most cost effective.

  2. The role of biotechnology training partnerships in expanding local employment opportunities for community college graduates in California's biotechnology industry

    E-Print Network [OSTI]

    Agia, Aziza Eugenie

    2010-01-01T23:59:59.000Z

    This study addresses a gap in the policy and planning literature regarding the extent to which public workforce intermediaries in a knowledge-intensive industry expand employment opportunities for a nontraditional, i.e., ...

  3. In-depth survey report: Control technology for metal reclamation industries at East Penn Manufacturing Company Inc., Lyon Station, Pennsylvania

    SciTech Connect (OSTI)

    Hall, R.M.; Earnest, G.S.; Jensen, P.A.; Zimmer, A.T.

    1996-06-03T23:59:59.000Z

    In an effort to identify effective hazard control methods and work practices, an in depth evaluation was conducted at the East Penn Manufacturing Company Inc. (SIC-3341), Lyon Station, Pennsylvania, which had previously been identified as having the lowest air lead (7439921) concentrations in lead smelter areas during a previous survey. This facility was primarily involved in lead reclamation from recycled automobile and industrial batteries. Control methods employed included automation, local exhaust ventilation, partial enclosures, and enclosed ventilation systems in the reverberatory and blast furnaces, and in casting and refinery areas. Employees in production areas also wore filtered half mask respirators, adhered to strict company policies on personal hygiene, and participated in incentive programs designed to reduce blood lead levels and encourage good personal hygiene and work practices. The authors noted that there was a potential for significant lead exposure in the blast furnace area, reverberatory furnace area, refinery area, and front end load operations. The authors recommend that efforts be made to improve controls in these areas.

  4. Manufacturing industry challenges and responses to EU, California, and other product-targeted environmental regulations

    E-Print Network [OSTI]

    Kirschner, Michael

    2008-01-01T23:59:59.000Z

    that it took the automotive industry until 2002 to unifycounterparts in the automotive industry on lessons learned,but predating it, the automotive industry started developing

  5. Superfos Packaging: Plastics Manufacturer Saves $100,000 Per Year by Implementing Industrial Energy Assessment Recommendations

    SciTech Connect (OSTI)

    Not Available

    2005-09-01T23:59:59.000Z

    Industrial Technologies Program's BestPractices case study based on a comprehensive plant assessment conducted at Superfos Packaging by ITP's Industrial Assessment Center in conjunction with The Society of the Plastics Industry, Inc.

  6. Current and future industrial energy service characterizations. Volume III. Energy data on 15 selected states' manufacturing subsector

    SciTech Connect (OSTI)

    Krawiec, F.; Thomas, T.; Jackson, F.; Limaye, D.R.; Isser, S.; Karnofsky, K.; Davis, T.D.

    1980-11-01T23:59:59.000Z

    An examination is made of the current and future energy demands, and uses, and cost to characterize typical applications and resulting services in the US and industrial sectors of 15 selected states. Volume III presents tables containing data on selected states' manufacturing subsector energy consumption, functional uses, and cost in 1974 and 1976. Alabama, California, Illinois, Indiana, Louisiana, Michigan, Missouri, New Jersey, New York, Ohio, Oregon, Pennsylvania, Texas, West Virginia, and Wisconsin were chosen as having the greatest potential for replacing conventional fuel with solar energy. Basic data on the quantities, cost, and types of fuel and electric energy purchased by industr for heat and power were obtained from the 1974 and 1976 Annual Survey of Manufacturers. The specific indutrial energy servic cracteristics developed for each selected state include. 1974 and 1976 manufacturing subsector fuels and electricity consumption by 2-, 3-, and 4-digit SIC and primary fuel (quantity and relative share); 1974 and 1976 manufacturing subsector fuel consumption by 2-, 3-, and 4-digit SIC and primary fuel (quantity and relative share); 1974 and 1976 manufacturing subsector average cost of purchsed fuels and electricity per million Btu by 2-, 3-, and 4-digit SIC and primary fuel (in 1976 dollars); 1974 and 1976 manufacturing subsector fuels and electric energy intensity by 2-, 3-, and 4-digit SIC and primary fuel (in 1976 dollars); manufacturing subsector average annual growth rates of (1) fuels and electricity consumption, (2) fuels and electric energy intensity, and (3) average cost of purchased fuels and electricity (1974 to 1976). Data are compiled on purchased fuels, distillate fuel oil, residual ful oil, coal, coal, and breeze, and natural gas. (MCW)

  7. A Road Map for Success: How Northwest Manufactured Housing Conservation Efforts Revolutionized an Industry.

    SciTech Connect (OSTI)

    Gilbertson, William L.

    1993-04-01T23:59:59.000Z

    The evolution of an ongoing Bonneville Power Administration effort to improve the energy efficiency of manufactured homes is chronicled in this informal history. Over the past nine years, Bonneville`s manufactured housing project has undertaken many activities, including technical studies, cooperative ventures, design studies, and information dissemination. These activities are covered.

  8. Department of Industrial and Manufacturing Engineering Fall 2011 Multiple Position Welding Platform

    E-Print Network [OSTI]

    Demirel, Melik C.

    Welding Platform Overview The Rockland Manufacturing Company makes a wide variety of custom attachments · CAD models created for the adjustable platform designs · Prototype manufactured at Penn State using raw materials for the platform and railing and a purchased pallet stacker and step ladder Outcomes

  9. The re-industrial city : what case studies from New York and San Francisco tell us about the urban manufacturing resurgence

    E-Print Network [OSTI]

    Muessig, Anna Catherine

    2013-01-01T23:59:59.000Z

    After a century of economic and planning trends that sent industry overseas and to the suburbs, manufacturing is stabilizing, if not growing, in American cities. This is good news for many urbanists eager to attract the ...

  10. Bioinformatics | Computer Engineering | Cyber Security | Electrical Engineering | Industrial Engineering | Manufacturing Engineering Organizational Behavior | Power Electronics and Systems | Telecommunication Networks | Wireless Innovation

    E-Print Network [OSTI]

    Aronov, Boris

    or in Westchester and Long Island. The degree earned and the body of knowledge is exactly the same as those receivedBioinformatics | Computer Engineering | Cyber Security | Electrical Engineering | Industrial Engineering | Manufacturing Engineering Organizational Behavior | Power Electronics and Systems

  11. The following are appendices A, B1 and B2 of our paper, "Integrated Process Modeling and Product Design of Biodiesel Manufacturing", that appears in the Industrial and

    E-Print Network [OSTI]

    Liu, Y. A.

    Design of Biodiesel Manufacturing", that appears in the Industrial and Engineering Chemistry Research a Biodiesel Process Model To access NIST TDE Data Engine in Aspen Plus version 2006.5 or V7.0 Step 1. Enter

  12. Ultra-High Efficiency and Low-Emissions Combustion Technology for Manufacturing Industries

    SciTech Connect (OSTI)

    Atreya, Arvind

    2013-04-15T23:59:59.000Z

    The purpose of this research was to develop and test a transformational combustion technology for high temperature furnaces to reduce the energy intensity and carbon footprint of U.S. manufacturing industries such as steel, aluminum, glass, metal casting, and petroleum refining. A new technology based on internal and/or external Flue Gas Recirculation (FGR) along with significant enhancement in flame radiation was developed. It produces "Radiative Flameless Combustion (RFC)" and offers tremendous energy efficiency and pollutant reduction benefits over and above the now popular "flameless combustion." It will reduce the energy intensity (or fuel consumption per unit system output) by more than 50% and double the furnace productivity while significantly reducing pollutants and greenhouse gas emissions (10^3 times reduction in NOx and 10 times reduction in CO & hydrocarbons and 3 times reduction in CO2). Product quality improvements are also expected due to uniform radiation, as well as, reduction in scale/dross formation is expected because of non-oxidative atmosphere. RFC is inexpensive, easy to implement, and it was successfully tested in a laboratory-scale furnace at the University of Michigan during the course of this work. A first-ever theory with gas and particulate radiation was also developed. Numerical programs were also written to design an industrial-scale furnace. Nine papers were published (or are in the process of publication). We believe that this early stage research adequately proves the concept through laboratory experiments, modeling and computational models. All this work is presented in the published papers. Important conclusions of this work are: (1) It was proved through experimental measurements that RFC is not only feasible but a very beneficial technology. (2) Theoretical analysis of RFC was done in (a) spatially uniform strain field and (b) a planar momentum jet where the strain rate is neither prescribed nor uniform. Four important non-dimensional parameters controlling RFC in furnaces were identified. These are: (i) The Boltzmann number; (ii) The Damkohler number, (iii) The dimensionless Arrhenius number, and (iv) The equivalence ratio. Together they define the parameter space where RFC is possible. It was also found that the Damkohler number must be small for RFC to exist and that the Boltzmann number expands the RFC domain. The experimental data obtained during the course of this work agrees well with the predictions made by the theoretical analysis. Interestingly, the equivalence ratio dependence shows that it is easier to establish RFC for rich mixtures than for lean mixtures. This was also experimentally observed. Identifying the parameter space for RFC is necessary for controlling the RFC furnace operation. It is hoped that future work will enable the methodology developed here to be applied to the operation of real furnaces, with consequent improvement in efficiency and pollutant reduction. To reiterate, the new furnace combustion technology developed enables intense radiation from combustion products and has many benefits: (i) Ultra-High Efficiency and Low-Emissions; (ii) Uniform and intense radiation to substantially increase productivity; (iii) Oxygen-free atmosphere to reduce dross/scale formation; (iv) Provides multi-fuel capability; and (v) Enables carbon sequestration if pure oxygen is used for combustion.

  13. Industry

    SciTech Connect (OSTI)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01T23:59:59.000Z

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

  14. Industrial Utilization of Coal-Oil Mixtures

    E-Print Network [OSTI]

    Dunn, J. E.; Hawkins, G. T.

    1982-01-01T23:59:59.000Z

    Coal-oil mixtures (COM) are receiving increasing interest as economical alternatives to residual fuel oil and natural gas used in heavy industrial and utility applications. Four basic approaches are currently employed in the manufacture of COM...

  15. Department of Industrial and Manufacturing Engineering Fall 2012 Automation of Test Sample Burning

    E-Print Network [OSTI]

    Demirel, Melik C.

    with Meadoweld RS-100 Abrasive Rail Saw In-house fabricated aluminium workstation ramp with industrial matting Motion-Sensor LED Battery Powered Spotlights #12;

  16. FACULTY POSITION ANNOUNCEMENT Manufacturing and/or Logistics The Industrial & Systems Engineering Department in the College of Engineering at the University of

    E-Print Network [OSTI]

    Kaminsky, Werner

    FACULTY POSITION ANNOUNCEMENT ­ Manufacturing and/or Logistics The Industrial & Systems Engineering must have a Ph.D. in Industrial Engineering, Systems Engineering and/or Operations Research Department in the College of Engineering at the University of Washington is preparing to accept applications

  17. Department of Industrial Engineering Spring 2012 Equipment Jack Manufacturing Process Improvement at CIU -Global Project

    E-Print Network [OSTI]

    Demirel, Melik C.

    it to the current system's capacity Perform FMEA to conclude the top events critical to quality for the assembly collection for both EWMA, FMEA, and manufacturing systems Outcomes New, standardized process increased forecast schedules, orders, and capabilities. FMEA illustrates assembly steps that are crucial to quality

  18. Rate of Industrial Conservation - Petroleum Refining, Chemicals and Pulp and Paper Manufacture

    E-Print Network [OSTI]

    Prengle, H. W. Jr.; Golden, S. A.

    1979-01-01T23:59:59.000Z

    are the goals and expectations for decreases in industrial energy use during the next 10-20 years? The specific energy consumption (SEC) of a plant or industry, measured in BTU of fuel used/ton of product produced, can be used to monitor the energy conserved...

  19. Opportunities and Barriers in the Implementation of Energy Efficiency Measures in Plastic Manufacturing 

    E-Print Network [OSTI]

    Kanunho, A; Yong, J. C.

    2012-01-01T23:59:59.000Z

    The plastic industry in the U.S. employs approximately 9% [1] of the manufacturing work force and consumes approximately 6% [1] of the total energy used by the U.S. industries. According to the Department of Energy (DOE), manufacturers of plastic...

  20. A framework for developing, manufacturing, and sourcing trucks & equipment in a global fluid management industry

    E-Print Network [OSTI]

    Awwad, Ghassan Samir

    2009-01-01T23:59:59.000Z

    Selecting and executing the optimal strategy for developing new products is a non trivial task, especially for low volume, high complexity products in a highly volatile global industry such as Fluid Management. At Fluid ...

  1. Manufacturing industry challenges and responses to EU, California, and other product-targeted environmental regulations

    E-Print Network [OSTI]

    Kirschner, Michael

    2008-01-01T23:59:59.000Z

    directive (2002/96/EC, “WEEE” ) the EU expanded its scope ofe-waste”) regulation like WEEE, decided to take matters intake its cues from RoHS and WEEE. While industry lobbying

  2. " Electricity Generation by Employment Size Categories, Industry Group,"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocksa. Appliances byA49. Total Inputs of Energy for Heat,25Total

  3. " Electricity Generation by Employment Size Categories, Industry Group, and"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocksa. Appliances byA49. Total Inputs of12.1.S4.1.4

  4. MANUFACTURING Manufacturing and Biomanufacturing

    E-Print Network [OSTI]

    Magee, Joseph W.

    process improvements to manufacturing. In addition, the critical national need area of Manufacturing hasMANUFACTURING Manufacturing and Biomanufacturing: Materials Advances and Critical Processes NATIONAL NEED The proposed topics within "Manufacturing and Biomanufacturing: Materials Advances

  5. Innovative Manufacturing Initiative Recognition Day, Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications Innovative Manufacturing Initiative Recognition Day Advanced Manufacturing Office Overview Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry...

  6. Monitoring the resin infusion manufacturing process under industrial environment using distributed sensors

    E-Print Network [OSTI]

    Wang, Peng; Drapier, Sylvain; Vautrin, Alain; Minni, Jean-Christophe; 10.1177/0021998311410479

    2012-01-01T23:59:59.000Z

    A novel direct approach to detect the resin flow front during the Liquid Resin Infusion process under industrial environment is proposed. To detect the resin front accurately and verify the results, which are deduced from indirect micro-thermocouples measurements, optical fiber sensors based on Fresnel reflection are utilized. It is expected that the results derived from both techniques will lead to an improvement of our understanding of the resin flow and in particular prove that micro-thermocouples can be used as sensors as routine technique under our experimental conditions. Moreover, comparisons with numerical simulations are carried out and experimental and simulated mold filling times are successfully compared.

  7. Industrial Activities at DOE: Efficiency, Manufacturing, Process, and Materials R&D

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet),EnergyImprovementINDIAN COUNTRY ENERGYEnergyIndustrial

  8. Advanced Manufacturing for a U.S. Clean Energy Economy (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-03-01T23:59:59.000Z

    This fact sheet is an overview of the U.S. Department of Energy's Advanced Manufacturing Office. Manufacturing is central to our economy, culture, and history. The industrial sector produces 11% of U.S. gross domestic product (GDP), employs 12 million people, and generates 57% of U.S. export value. However, U.S. industry consumes about one-third of all energy produced in the United States, and significant cost-effective energy efficiency and advanced manufacturing opportunities remain unexploited. As a critical component of the National Innovation Policy for Advanced Manufacturing, the U.S. Department of Energy's (DOE's) Advanced Manufacturing Office (AMO) is focused on creating a fertile environment for advanced manufacturing innovation, enabling vigorous domestic development of transformative manufacturing technologies, promoting coordinated public and private investment in precompetitive advanced manufacturing technology infrastructure, and facilitating the rapid scale-up and market penetration of advanced manufacturing technologies.

  9. A study of chemicals as potential health hazards in the manufacturing industries of Arkansas

    E-Print Network [OSTI]

    Franks, Roye Wendell

    1940-01-01T23:59:59.000Z

    ~ or cuucacxco? tho oreetce Kittxe RaeTc CLeabor of Camoroec. tha krimucan ~eal ~e end ~ the ynhiio houltb ysruannul ia tho health unite of tbo etuto~ ~~so coeds sore- eo~ into industry groans es uoud bF tho Vaktud Gtetoe Bureau of- Canaan, ead groayo oaittod... of tks crcacc in the acnnin8 inansXxge GiXSP fixe Csnnins fsctoxios, , . occrlopio8 @gl puxscns ocxo oaxlrcpoae fg Re 4@5 PeyQatian Canaan fi8aXO Of gpQ, @OXhgm in tha ckuteXkila fna- XOXCOS On@ ~ ~ nnlSX cdanufaahqXin8 Je@uhXiae~ hns bann OXnno fa...

  10. Optimization of measurement configurations for geometrical calibration of industrial robot

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , the accuracy of robotic manipulator depends on a number of factors. Usually, for the industrial applicationsOptimization of measurement configurations for geometrical calibration of industrial robot Alexandr of industrial robots employed in precise manufacturing. To identify geometric parameters, an advanced

  11. The Results of More Than 250 Industrial Assessments for Manufacturing by the Louisiana Industrial Assessment Center for the Past Ten Years 

    E-Print Network [OSTI]

    Kozman, T.; Lee, J.

    2010-01-01T23:59:59.000Z

    The U.S. Department of Energy's Industrial Technologies Program (ITP) has been working with industry since 1976 to encourage the development and adoption of new, energy-efficient technologies. ITP has helped industry not ...

  12. Advanced Materials Manufacturing | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    existing manufacturing industries and result in creative new products. Stronger, more corrosion-resistant and lower cost steel alloys are being developed and commercialized to...

  13. Master of Finance Employment Report

    E-Print Network [OSTI]

    Ceder, Gerbrand

    ) Standards for Reporting MBA Employment Statistics (mbacsc.org). Conformance to this business school industry

  14. Ferro Corporation: Industrial Energy Assessment Identifies $210,000 in Savings Opportunities for Glaze and Coatings Manufacturer

    SciTech Connect (OSTI)

    Not Available

    2005-09-01T23:59:59.000Z

    Industrial Technologies Program's BestPractices case study based on a comprehensive plant assessment conducted at the Ferro Corporation by ITP's Industrial Assessment Center in conjunction with The Society of the Plastics Industry, Inc.

  15. Precise Technology, Inc.: Molded Plastics Manufacturer's Energy Use Drops 22% as a Result of Industrial Energy Assessment Recommendations

    SciTech Connect (OSTI)

    Not Available

    2005-09-01T23:59:59.000Z

    Industrial Technologies Program's BestPractices case study based on a comprehensive plant assessment conducted at Precise Technology, Inc by ITP's Industrial Assessment Center in conjunction with The Society of the Plastics Industry, Inc.

  16. VPI Corporation: Industrial Energy Assessment Helps Manufacturer Start Saving $7,000 in Less Than a Year

    SciTech Connect (OSTI)

    Not Available

    2005-09-01T23:59:59.000Z

    Industrial Technologies Program's BestPractices case study based on a comprehensive plant assessment conducted at VPI Coporation by ITP's Industrial Assessment Center in conjunction with The Society of the Plastics Industry, Inc.

  17. A Study to Develop an Industrial-Scale, Computer-Controlled High Magnetic Field Processing (HMFP) System to Assist in Commercializing the Novel, Enabling HMFP Manufacturing Technology

    SciTech Connect (OSTI)

    Ludtka, Gail Mackiewicz- [ORNL; Chourey, Aashish [American Magnetics Inc.

    2010-08-01T23:59:59.000Z

    As the original magnet designer and manufacturer of ORNL s 9T, 5-inch ID bore magnet, American Magnetics Inc. (AMI) has collaborated with ORNL s Materials Processing Group s and this partnership has been instrumental in the development of our unique thermo-magnetic facilities and expertise. Consequently, AMI and ORNL have realized that the commercial implementation of the High Magnetic Field Processing (HMFP) technology will require the evolution of robust, automated superconducting (SC) magnet systems that will be cost-effective and easy to operate in an industrial environment. The goal of this project and CRADA is to significantly expedite the timeline for implementing this revolutionary and pervasive cross-cutting technology for future US produced industrial components. The successful completion of this project is anticipated to significantly assist in the timely commercialization and licensing of our HMFP intellectual property for a broad spectrum of industries; and to open up a new market for AMI. One notable outcome of this project is that the ThermoMagnetic Processing Technology WON a prestigious 2009 R&D 100 Awards. This award acknowledges and recognizes our TMP Technology as one of the top 100 innovative US technologies in 2009. By successfully establishing the design requirements for a commercial scale magnetic processing system, this project effort has accomplished a key first step in facilitating the building and demonstration of a superconducting magnetic processing coil, enabling the transition of the High Magnetic Field Processing Technology beyond a laboratory novelty into a commercially viable and industrially scalable Manufacturing Technology.

  18. Manufacturing Battle Creek

    E-Print Network [OSTI]

    de Doncker, Elise

    to the manufacturing sector in Western Michigan. In addition to serving as director of the MRC, Dr. Patten is alsoManufacturing Research Center Kalamazoo Battle Creek The College of Engineering and Applied Sciences The Supporting manufacturing industries by providing opportunities for collaboration with faculty

  19. Impact of the Massachusetts Pharmaceutical and Medical Device Manufacturer Code of Conduct on medical device physician-industry collaboration

    E-Print Network [OSTI]

    Wolf, Daniel W. (Daniel William)

    2010-01-01T23:59:59.000Z

    The Massachusetts Pharmaceutical and Medical Device Manufacturer Code of Conduct (PCOC) or 105 CMR 970.000 was enacted by the Massachusetts state legislature and adopted by the Department of Public Health (DPH) in July ...

  20. Dynamic order allocation for make-to-order manufacturing networks : an industrial case study of optimization under uncertainty/

    E-Print Network [OSTI]

    Williams, Gareth Pierce

    2011-01-01T23:59:59.000Z

    Planning and controlling production in a large make-to-order manufacturing network poses complex and costly operational problems. As customers continually submit customized orders, a centralized decision-maker must quickly ...

  1. Additive Manufacturing in China: Aviation and Aerospace Applications (Part 2)

    E-Print Network [OSTI]

    ANDERSON, Eric

    2013-01-01T23:59:59.000Z

    Analysis May 2013 Additive Manufacturing in China: Aviationan overview of China’s additive manufacturing industry wasmilitary achievements in additive manufacturing. 2 Initial

  2. Additive Manufacturing in China: Aviation and Aerospace Applications (Part 2)

    E-Print Network [OSTI]

    ANDERSON, Eric

    2013-01-01T23:59:59.000Z

    Bulletin Analysis May 2013 Additive Manufacturing in China:an overview of China’s additive manufacturing industry wasmilitary achievements in additive manufacturing. 2 Initial

  3. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    SHIP - Solar heat for industrial processes. Internationalsolar power could be used to provide process heat for

  4. OTHER INDUSTRIES

    Broader source: Energy.gov [DOE]

    AMO funded research results in novel technologies in diverse industries beyond the most energy intensive ones within the U.S. Manufacturing sector. These technologies offer quantifiable energy...

  5. Occupational employment in nuclear-related activities, 1981

    SciTech Connect (OSTI)

    Baker, J.G.; Olsen, K.

    1982-04-01T23:59:59.000Z

    1981 employment in nuclear-related activities is described, and compared to previous years. Employment characteristics examined include detailed occupations of scientists, engineers, and technicians; worker involvement in research and development activities; employment by industrial segment (e.g., reactor operation and maintenance, weapons production, and commercial laboratory services); employment by establishment type (government-owned, contractor-operated (GOCO), private, and nonprofit); regional employment; and employment by establishment size. Total 1981 nuclear-related employment is estimated to be 249,500 - a growth of 22,600 workers over the 1977 total. GOCO workers make up 36.9% of this total. Among all the nuclear-related workers, scientists comprise 5.1%, engineers, 15.3%; and technicians, 17.5%; the remaining 62.1% is composed of managers, skilled craft and clerical workers, and other support services. Research and development involvement has declined from the 1977 survey results, with 60.4% of scientists and 27.0% of engineers currently involved in R and D. The largest single industrial segment activity is weapons development (16.9% of total employment), followed closely by reactor operation and maintenance employment (16.7%). There has been considerable change in the distribution of employment by industrial segment from 1977 to 1981; the reactor and reactor component design and manufacturing segment fell by over 9700 workers while reactor operation and maintenance employment grew by over 24,000 workers.

  6. A Study to Develop an Industrial-Scale, Computer-Controlled High Magnetic Field Processing (HMFP) System to Assist in Commercializing the Novel, Enabling HMFP Manufacturing Technology

    SciTech Connect (OSTI)

    Lutdka, G. M.; Chourey, A. (American Magnetics, Inc.)

    2010-05-12T23:59:59.000Z

    As the original magnet designer and manufacturer of ORNL’s 9T, 5-inch ID bore magnet, American Magnetics Inc. (AMI) has collaborated with ORNL’s Materials Processing Group’s and this partnership has been instrumental in the development of our unique thermo-magnetic facilities and expertise. Consequently, AMI and ORNL have realized that the commercial implementation of the High Magnetic Field Processing (HMFP) technology will require the evolution of robust, automated superconducting (SC) magnet systems that will be cost-effective and easy to operate in an industrial environment. The goal of this project and CRADA is to significantly expedite the timeline for implementing this revolutionary and pervasive cross-cutting technology for future US produced industrial components. The successful completion of this project is anticipated to significantly assist in the timely commercialization and licensing of our HMFP intellectual property for a broad spectrum of industries; and to open up a new market for AMI. One notable outcome of this project is that the ThermoMagnetic Processing Technology WON a prestigious 2009 R&D 100 Awards. This award acknowledges and recognizes our TMP Technology as one of the top 100 innovative US technologies in 2009. By successfully establishing the design requirements for a commercial scale magnetic processing system, this project effort has accomplished a key first step in facilitating the building and demonstration of a superconducting magnetic processing coil, enabling the transition of the High Magnetic Field Processing Technology beyond a laboratory novelty into a commercially viable and industrially scalable Manufacturing Technology.

  7. Stimulating Manufacturing Excellence in Small and Medium Enterprises, SMESME 2005 Stimulating Industrial Excellence in European Textile SME's

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    Industrial Excellence in European Textile SME's Nicholas Bilalis 1 , Emmanuel Alvizos 1 , Emmanuel There are more than 100.000 European SME's, in the whole chain of operation from spinning to clothing. Keywords: Industrial Excellence, Textile Sector, IEA, SME 1. Introduction The findings presented

  8. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    oil, starch and corn refining, since these can be a source of fuel products. The sugar cane industry

  9. The Results (Lessons Learned) of More than 110 Energy Audits for Manufacturers by the Louisiana Industrial Assessment Center

    E-Print Network [OSTI]

    Kozman, T.; Davies, T.; Reynolds, C.; O'Quin, R.; DaCosta, J.; Galti, T.; Pechon, C.; Stutes, K.

    2005-01-01T23:59:59.000Z

    This paper and discussion presents the summary and results of energy audits or assessments conducted by the University of Louisiana Lafayette Industrial Assessment Center, which is sponsored by the US Department of Energy, for the first four years...

  10. An Equal Opportunity Employer / Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA Los Alamos National Security, LLC Request for Information on how industry may partner with the

    E-Print Network [OSTI]

    .S. Department of Energy's NNSA Los Alamos National Security, LLC Request for Information on how industry may Employer / Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA scaling

  11. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    of its electricity requirements in the USA (US DOE, 2002)USA, where motor-driven systems account for 63% of industrial electricity

  12. Table 40. U.S. Coal Stocks at Manufacturing Plants by North American Industry Classification System (NAICS) Code

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Energy I I' a(STEO)U.S. Coal Stocks at Manufacturing Plants by North

  13. Solar collector manufacturing activity 1993

    SciTech Connect (OSTI)

    Not Available

    1994-08-15T23:59:59.000Z

    The report presents national and State-level data on the U.S. solar thermal collector and photovoltaic cell and module manufacturing industry.

  14. Biomedical | Chemical & Biomolecular | Civil & Environmental | Electrical & Computer | Industrial | Mechanical | Petroleum Careers in Industrial Engineering

    E-Print Network [OSTI]

    Glowinski, Roland

    | Mechanical | Petroleum Careers in Industrial Engineering Manufacturing, service and retail industries hireBiomedical | Chemical & Biomolecular | Civil & Environmental | Electrical & Computer | Industrial a significant number of industrial engineers. Specific industries include automobile manufacturers, electronics

  15. Hazardous air pollutant emissions from process units in the Elastomer Manufacturing Industry: Supplementary information document for proposed standards

    SciTech Connect (OSTI)

    NONE

    1995-05-01T23:59:59.000Z

    The document contains technical memoranda that provide rationale and information used to develop the Polymers and Resins Group I Elastomers and Synthetic Rubbers proposal package. The memoranda included in the document provide detailed background information for the Basis and Purpose Document for the proposed standards (PB95-231098). The memoranda address industry characterization, baseline emissions, subcategorization, MACT floors and regulatory alternatives, the potential for new sources, and the estimated regulatory alternative impacts.

  16. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    iron and steel production. IEA Greenhouse Gas R&D Programme,tempera- ture range. IEA/Caddet, Sittard, The Netherlands.industry. Cheltenham, UK, IEA Greenhouse Gas R&D Programme,

  17. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01T23:59:59.000Z

    process residual like bagasse are now available (Cornland etsugar in- dustry uses bagasse and the edible oils industrySection 7.4.7. ). The use of bagasse for energy is likely to

  18. Green Manufacturing

    SciTech Connect (OSTI)

    Patten, John

    2013-12-31T23:59:59.000Z

    Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

  19. Unlocking the Potential of Additive Manufacturing in the Fuel...

    Energy Savers [EERE]

    Manufacturing in the Fuel Cells Industry Download presentation slides from the DOE Fuel Cell Technologies Office webinar "Additive Manufacturing for Fuel Cells" held on...

  20. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

  1. A National Resource for Industry

    E-Print Network [OSTI]

    alloys, and metal matrix composite products carbon fibe's manufacturing industries. These industries call upon ORNL's expertise in materials synthesis, characterization-efficient manufacturing processes and materials targeting products of the future. The Department of Energy's first

  2. Mechanics and Design, Manufacturing Professor Hani Naguib

    E-Print Network [OSTI]

    Mechanical and Industrial Engineering Manufacturing What is Manufacturing? The transformation of materials. Apple Canada(Se12), Revenue: $5,067,109 9. CGI Group(Se12), Revenue: $4,786,857 10. Siemens Canada(Se12

  3. Industrial Geospatial Analysis Tool for Energy Evaluation

    E-Print Network [OSTI]

    Alkadi, N.; Starke, M.; Ma, O.; Nimbalkar, S.; Cox, D.; Dowling, K.; Johnson, B.; Khan, S.

    2013-01-01T23:59:59.000Z

    of manufacturing industries based on each type of industries using information from DOE's Industrial Assessment Center database (IAC-DB) and DOE's Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition...

  4. Additive Manufacturing in China: Threats, Opportunities, and Developments (Part I)

    E-Print Network [OSTI]

    ANDERSON, Eric

    2013-01-01T23:59:59.000Z

    application of additive manufacturing in China’s aviationAnalysis May 2013 Additive Manufacturing in China: Threats,an overview of China’s additive manufacturing industry is

  5. Additive Manufacturing in China: Threats, Opportunities, and Developments (Part I)

    E-Print Network [OSTI]

    ANDERSON, Eric

    2013-01-01T23:59:59.000Z

    examine the application of additive manufacturing in China’sBulletin Analysis May 2013 Additive Manufacturing in China:an overview of China’s additive manufacturing industry is

  6. PEM Stack Manufacturing: Industry Status

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in ManyDepartmentOutreachDepartment ofProgram49, thePAGEPART

  7. Oak Ridge Centers for Manufacturing Technology, part 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    more than 1,600 businesses nationwide. These industries ran the gamut of all types of industry in the nation. Automotive part production, food product manufacturing, ceramic...

  8. Manufacturing consumption of energy 1991

    SciTech Connect (OSTI)

    Not Available

    1994-12-01T23:59:59.000Z

    This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

  9. Design and Implementation of a Virtual Information System for Agile Manufacturing

    E-Print Network [OSTI]

    Nagi, Rakesh

    an agile industry eventually. The Agile Manufacturing Enterprise Forum (AMEF) at the Iacocca Institute

  10. Robotics & Computerlntegrated Manufacturing, Vol. 9, No.6, pp. 505-511, 1992 Printed in Great Britain

    E-Print Network [OSTI]

    Yao, Y. Lawrence

    involving industrial robots has been found essential for smaller manufacturing lots with more frequent model

  11. 2007 Status of Manufacturing: Polymer Electrolyte Membrane (PEM) Fuel Cells

    SciTech Connect (OSTI)

    Wheeler, D.; Sverdrup, G.

    2008-03-01T23:59:59.000Z

    In this document we assess the North American industry's current ability to manufacture polymer electrolyte membrane (PEM) fuel cells.

  12. American Energy and Manufacturing Competitiveness Summit

    Broader source: Energy.gov [DOE]

    The American Energy and Manufacturing Competitiveness Summit will bring together leaders and perspectives from industry, government, academia, national laboratories, labor, and policy organizations...

  13. Oak Ridge Centers for Manufacturing Technology ? testimonials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that the program did save jobs and did create opportunities for the American manufac- turing industry to grow and to continue to operate because of the tough manufacturing...

  14. Performance, Market and Manufacturing Constraints relevant to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Constraints relevant to the Industrialization of Thermoelectric Devices Market pricing of thermoelectric raw materials and processing, cost of manufacture of devices and...

  15. Presentations for Industry

    Broader source: Energy.gov [DOE]

    Learn energy-saving strategies from leading manufacturing companies and energy experts. The presentations are organized below by topic area. In addition, industrial energy managers, utilities, and...

  16. About Industrial Distributed Energy

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office's (AMO's) Industrial Distributed Energy activities build on the success of predecessor DOE programs on distributed energy and combined heat and power (CHP) while...

  17. Coal industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-12-01T23:59:59.000Z

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

  18. Coal industry annual 1993

    SciTech Connect (OSTI)

    Not Available

    1994-12-06T23:59:59.000Z

    Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

  19. Employment in Quebec's forest industry has shown considerable variation during the last few decades. Different factors have been suggested to explain the latest crisis in

    E-Print Network [OSTI]

    Asselin, Hugo

    and exchange rate. Timber and newsprint price fluctuations have also strongly affected employment in the forest of acquisition, blamed as a profit-eater by forest companies, would be much lower today if harvested trees were

  20. ATS materials/manufacturing

    SciTech Connect (OSTI)

    Karnitz, M.A.; Wright, I.G.; Ferber, M.K. [and others

    1997-11-01T23:59:59.000Z

    The Materials/Manufacturing Technology subelement is a part of the base technology portion of the Advanced Turbine Systems (ATS) Program. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. The projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single crystal airfoil manufacturing technologies, materials characterization, and technology information exchange. This paper presents highlights of the activities during the past year. 12 refs., 24 figs., 4 tabs.

  1. Use of the Inverse Approach for the Manufacture and Decoration of Food Cans

    SciTech Connect (OSTI)

    Duffett, G.A.; Forgas, A.; Neamtu, L. [Quantech ATZ, Barcelona (Spain); Naceur, H.; Batoz, J.L.; Guo, Y.Q. [Divergent Consultants, Centre de Transfert, Compiegne (France)

    2005-08-05T23:59:59.000Z

    Innovation is a key objective in the metal packaging industry in order to produce new concepts, designs, shapes and printing. Simulation technology now allows both the can design as well as the manufacturing process to be carefully analysed before any physical prototypes or dies have been manufactured. These simulations are traditionally carried out using incremental simulation methodologies. However, much information may also be attained by using the inverse approach: the initial blank format for the can body as well as its lid may be optimised much faster, the actual decoration of the can may be evaluated and even calculated when deformation printing techniques are utilised. This paper presents some of the technical details relating to the inverse approach employed in Stampack to carry out simulations important for the manufacture of food cans that are shown via industrial.

  2. Colorado State University Industrial Assessment Center Saves...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Assessment Center, inspects equipment at a manufacturing facility during an energy audit. | Photo courtesy of University of Missouri IAC. Industrial Assessment Centers...

  3. Impact of the Texas A&M University Industrial Assessment Center on Energy Conservation Behavior of Small to Medium-Sized Manufacturing Firms

    E-Print Network [OSTI]

    Eggebrecht, J. A.

    Reserve University. The Texas A&M University EADC performed its first energy survey in February, 1987. The US Department of Energy has cooperative agreements with two organizations, University City Science Center (UCSC), Philadelphia, Pennsylvania...,000). 3. No in-house energy expertise. 4. Fewer than 500 employees. To qualify, they must meet at least three of the four criteria. Eligible manufacturers are requested to furnish copies of invoices for their energy purchases, including electricity...

  4. Energy Consumption Characteristics of Light Manufacturing Facilities in The Northern Plains: A Study of Detailed Data from 10 Industrial Energy Audits Conducted in 1993 

    E-Print Network [OSTI]

    Twedt, M.; Bassett, K.

    1994-01-01T23:59:59.000Z

    Extensive research has been done on residential and commercial applications of existing technologies for energy conservation. This study specifically examines industrial facilities for energy consumption profiles and common energy conservation...

  5. Additive Manufacturing: Implications on Research and Manufacturing

    E-Print Network [OSTI]

    Crawford, T. Daniel

    Additive Manufacturing: Implications on Research and Manufacturing With recent developments, etc.), additive manufacturing (AM) has the potential to become a transformative technology in innovation-based manufacturing. Agencies such as the Department of Defense, the National Science Foundation

  6. Office of Industry Research and Technology Programs Greetings to Industry

    E-Print Network [OSTI]

    Ginzel, Matthew

    Assistant Vice President, Corporate & Foundation Relations Inside this issue... Greetings to Industry. The founding members are American Axle and Manufacturing, Eaton Corpora- tion and John Deere. This applied

  7. Calibration of damage parameters is an important issue for the use of damage laws, and particularly for industrial manufacturing processes. This paper deals with an

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Abstract Calibration of damage parameters is an important issue for the use of damage laws Lemaitre damage parameters using tensile tests. An adapted objective function is built, and Efficient, ductile damage, global measurement. 1 Introduction An actual industrial issue is the study of material

  8. Manufacturing Laboratory (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Manufacturing Laboratory at the Energy Systems Integration Facility. The Manufacturing Laboratory at NREL's Energy Systems Integration Facility (ESIF) focuses on developing methods and technologies that will assist manufacturers of hydrogen and fuel cell technologies, as well as other renewable energy technologies, to scale up their manufacturing capabilities to volumes that meet DOE and industry targets. Specifically, the manufacturing activity is currently focused on developing and validating quality control techniques to assist manufacturers of low temperature and high temperature fuel cells in the transition from low to high volume production methods for cells and stacks. Capabilities include initial proof-of-concept studies through prototype system development and in-line validation. Existing diagnostic capabilities address a wide range of materials, including polymer films, carbon and catalyst coatings, carbon fiber papers and wovens, and multi-layer assemblies of these materials, as well as ceramic-based materials in pre- or post-fired forms. Work leading to the development of non-contact, non-destructive techniques to measure critical dimensional and functional properties of fuel cell and other materials, and validation of those techniques on the continuous processing line. This work will be supported by materials provided by our partners. Looking forward, the equipment in the laboratory is set up to be modified and extended to provide processing capabilities such as coating, casting, and deposition of functional layers, as well as associated processes such as drying or curing. In addition, continuous processes are used for components of organic and thin film photovoltaics (PV) as well as battery technologies, so synergies with these important areas will be explored.

  9. Profile of the rubber and plastics industry. EPA Office of Compliance sector notebook project

    SciTech Connect (OSTI)

    NONE

    1995-09-01T23:59:59.000Z

    The rubber and miscellaneous plastics products industry, as defined by the Standard Industrial Classification (SIC) code 30, includes establishments that manufacture products from plastic resins, natural and synthetic rubber, reclaimed rubber, futta percha, balata, and gutta siak. The second section provides background information on the size, geographic distribution, employment, production, sales, and economic condition of the Rubber and Plastics Products industry. The type of facilities described within the document are also described in terms of their Standard Industrial Classification (SIC) codes. Additionally, this section contains a list of the largest companies in terms of sales.

  10. Bio-Manufacturing: A Strategic clean energy manufacturing opportunity

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Plants Challenge Manufacturing R&D Facilities Manufacturing Demonstration Facility Manufacturing Institutes National Additive Manufacturing Innovation Institute - Pilot Now...

  11. Fuel Cell Manufacturing: American Energy and Manufacturing Competitive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Presentation on...

  12. Industry Supply Chain Development (Ohio)

    Broader source: Energy.gov [DOE]

    Supply Chain Development programs are focused on targeted industries that have significant growth opportunities for Ohio's existing manufacturing sector from emerging energy resources and...

  13. Research on advanced photovoltaic manufacturing technology

    SciTech Connect (OSTI)

    Jester, T.; Eberspacher, C. (Siemens Solar Industries, Camarillo, CA (United States))

    1991-11-01T23:59:59.000Z

    This report outlines opportunities for significantly advancing the scale and economy of high-volume manufacturing of high-efficiency photovoltaic (PV) modules. We propose to pursue a concurrent effort to advance existing crystalline silicon module manufacturing technology and to implement thin film CuInSe{sub 2} (CIS) module manufacturing. This combination of commercial-scale manufacturing of high-efficiency crystalline silicon modules and of pilot-scale manufacturing of low-cost thin film CIS technology will support continued, rapid growth of the US PV industry.

  14. Lightweighting Automotive Materials for Increased Fuel Efficiency and Delivering Advanced Modeling and Simulation Capabilities to U.S. Manufacturers

    SciTech Connect (OSTI)

    Hale, Steve

    2013-09-11T23:59:59.000Z

    Abstract The National Center for Manufacturing Sciences (NCMS) worked with the U.S. Department of Energy (DOE), National Energy Technology Laboratory (NETL), to bring together research and development (R&D) collaborations to develop and accelerate the knowledgebase and infrastructure for lightweighting materials and manufacturing processes for their use in structural and applications in the automotive sector. The purpose/importance of this DOE program: • 2016 CAFÉ standards. • Automotive industry technology that shall adopt the insertion of lightweighting material concepts towards manufacturing of production vehicles. • Development and manufacture of advanced research tools for modeling and simulation (M&S) applications to reduce manufacturing and material costs. • U.S. competitiveness that will help drive the development and manufacture of the next generation of materials. NCMS established a focused portfolio of applied R&D projects utilizing lightweighting materials for manufacture into automotive structures and components. Areas that were targeted in this program: • Functionality of new lightweighting materials to meet present safety requirements. • Manufacturability using new lightweighting materials. • Cost reduction for the development and use of new lightweighting materials. The automotive industry’s future continuously evolves through innovation, and lightweight materials are key in achieving a new era of lighter, more efficient vehicles. Lightweight materials are among the technical advances needed to achieve fuel/energy efficiency and reduce carbon dioxide (CO2) emissions: • Establish design criteria methodology to identify the best materials for lightweighting. • Employ state-of-the-art design tools for optimum material development for their specific applications. • Match new manufacturing technology to production volume. • Address new process variability with new production-ready processes.

  15. Recycling of cadmium and selenium from photovoltaic modules and manufacturing wastes. A workshop report

    SciTech Connect (OSTI)

    Moskowitz, P.D.; Zweibel, K. [eds.

    1992-10-01T23:59:59.000Z

    Since the development of the first silicon based photovoltaic cell in the 1950`s, large advances have been made in photovoltaic material and processing options. At present there is growing interest in the commercial potential of cadmium telluride (CdTe) and copper indium diselenide (CIS) photovoltaic modules. As the commercial potential of these technologies becomes more apparent, interest in the environmental, health and safety issues associated with their production, use and disposal has also increased because of the continuing regulatory focus on cadmium and selenium. In future, recycling of spent or broken CdTe and CIS modules and manufacturing wastes may be needed for environmental, economic or political reasons. To assist industry to identify recycling options early in the commercialization process, a Workshop was convened. At this Workshop, representatives from the photovoltaic, electric utility, and nonferrous metals industries met to explore technical and institutional options for the recycling of spent CdTe and CIS modules and manufacturing wastes. This report summarizes the results of the Workshop. This report includes: (1) A discussion of the Resource Conservation and Recovery Act regulations and their potential implications to the photovoltaic industry; (2) an assessment of the needs of the photovoltaic industry from the perspective of module manufacturers and consumers; (3) an overview of recycling technologies now employed by other industries for similar types of materials; and, (4) a list of recommendation.

  16. Recycling of cadmium and selenium from photovoltaic modules and manufacturing wastes

    SciTech Connect (OSTI)

    Moskowitz, P.D.; Zweibel, K. (eds.)

    1992-01-01T23:59:59.000Z

    Since the development of the first silicon based photovoltaic cell in the 1950's, large advances have been made in photovoltaic material and processing options. At present there is growing interest in the commercial potential of cadmium telluride (CdTe) and copper indium diselenide (CIS) photovoltaic modules. As the commercial potential of these technologies becomes more apparent, interest in the environmental, health and safety issues associated with their production, use and disposal has also increased because of the continuing regulatory focus on cadmium and selenium. In future, recycling of spent or broken CdTe and CIS modules and manufacturing wastes may be needed for environmental, economic or political reasons. To assist industry to identify recycling options early in the commercialization process, a Workshop was convened. At this Workshop, representatives from the photovoltaic, electric utility, and nonferrous metals industries met to explore technical and institutional options for the recycling of spent CdTe and CIS modules and manufacturing wastes. This report summarizes the results of the Workshop. This report includes: (1) A discussion of the Resource Conservation and Recovery Act regulations and their potential implications to the photovoltaic industry; (2) an assessment of the needs of the photovoltaic industry from the perspective of module manufacturers and consumers; (3) an overview of recycling technologies now employed by other industries for similar types of materials; and, (4) a list of recommendation.

  17. Clean Energy Technology Device Manufacturers' Credits (Delaware)

    Broader source: Energy.gov [DOE]

    Qualified manufacturers can apply for a tax break equal to 75% of the corporation income tax. The incentive is an increase from the Investment and Employment Credit Against Corporation Income Tax,...

  18. U.S. Manufacturing Energy Use and Loss: The Big Picture 

    E-Print Network [OSTI]

    Brueske, S.; Sabouni, R.

    2014-01-01T23:59:59.000Z

    A first step in realizing industrial energy efficiency opportunities is to understand how industry is using, and losing, energy. The U.S. Manufacturing Energy and Carbon Footprints provide a reliable macro-scale reference for manufacturing energy...

  19. Deaerators in Industrial Steam Systems, Energy Tips: STEAM, Steam Tip Sheet #18 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No53197 This workDayton: ENERGY8 Deaerators in Industrial Steam

  20. Modeling the semiconductor industry dynamics

    E-Print Network [OSTI]

    Wu, Kailiang

    2008-01-01T23:59:59.000Z

    The semiconductor industry is an exciting and challenging industry. Strong demand at the application end, plus the high capital intensity and rapid technological innovation in manufacturing, makes it difficult to manage ...

  1. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Ávila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01T23:59:59.000Z

    in Aerospace and Automotive Manufacturing Author: Avila,in the Aerospace and Automotive Industry“, SAE Transactionsin the aerospace and automotive industries has become

  2. Strategies for Burr Minimization and Cleanability in Aerospace and Automotive Manufacturing

    E-Print Network [OSTI]

    Avila, Miguel C.; Gardner, Joel D.; Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

    2006-01-01T23:59:59.000Z

    in Aerospace and Automotive Manufacturing Miguel Ávila, Joelin the aerospace and automotive industries has becomes in the aerospace and automotive industry, only during the

  3. External research and energy efficiency in the process industries

    SciTech Connect (OSTI)

    Kaarsberg, T.M.; Foust, T.D.

    1997-07-01T23:59:59.000Z

    The process industries in the US are under enormous pressure. These industries, even more than US industry on average, face skyrocketing environmental costs, a rapidly changing electricity market, potential climate change policies, aging infrastructure and strong international competition. To be profitable they must reduce their costs and environmental impacts while increasing their product quality, turnaround time, productivity and output. Most of these industries have already cut costs and labor as much as possible. Therefore, to survive, these industries must innovate. History shows that industries that are the most innovative are the most successful. These industries are vital to the US economy. For example, the metals, pulp and paper, chemicals and the petroleum refining industries account for more than $800 billion in products shipped and employ more than three million workers. Although the US has shifted dramatically toward services with 77% of workers and 74% of GDP now in the service sector, what many have missed is that the process industries are important customers for many of these new services. ServOnly the last two years of NSF industrial R and D data provide any breakout of non-manufacturing R and D. This paper discusses the past, current and possible future role of eternal research and development (R and D)--much of which is now in the service sector--in fostering innovation and thus energy efficiency in these industries. The authors suggest that these industries are more innovative than previously thought because of external research.

  4. Private-Public Partnerships for U.S. Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government Large Manufacturing Companies Small & Medium Enterprise (SMEs) Start-ups Industry Network of IMIs 2013 State of the Union Announcement National Network for...

  5. Purdue, GE Collaborate On Advanced Manufacturing | GE Global...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and democratization in manufacturing, Abhijit Deshmukh, the James J. Solberg Head of Industrial Engineering and the faculty leader for GEPurdue PRIAM, said, "Our...

  6. Level schedule implementation in unstable manufacturing environments

    E-Print Network [OSTI]

    López de Haro, Santiago

    2008-01-01T23:59:59.000Z

    American Axle & Manufacturing Inc. (AAM), headquartered in Detroit (MI) is one of the major Tier 1 suppliers in the automotive industry. The main challenge in AAM plant 2 is production rate unstability due to downtime, ...

  7. Climate VISION: Private Sector Initiatives: Automobile Manufacturers...

    Office of Scientific and Technical Information (OSTI)

    GHG Information Energy Footprints DOE developed a series of Energy Footprints to map the flow of energy supply and demand in U.S. manufacturing industries. Identifying the sources...

  8. Climate VISION: Private Sector Initiatives: Chemical Manufacturing...

    Office of Scientific and Technical Information (OSTI)

    Energy Footprints DOE developed a series of Energy Footprints to map the flow of energy supply and demand in U.S. manufacturing industries. Identifying the sources and end uses of...

  9. Manufacturing Energy and Carbon Footprints 

    E-Print Network [OSTI]

    Brueske, S.; Lorenz, T.

    2012-01-01T23:59:59.000Z

    Significant opportunities exist for improving energy efficiency in U.S. manufacturing. A first step in realizing these opportunities is to identify how industry is using energy. Where does it come from? What form is it in? Where is it used? How much...

  10. Manufacturing Energy and Carbon Footprints

    E-Print Network [OSTI]

    Brueske, S.; Lorenz, T.

    2012-01-01T23:59:59.000Z

    Significant opportunities exist for improving energy efficiency in U.S. manufacturing. A first step in realizing these opportunities is to identify how industry is using energy. Where does it come from? What form is it in? Where is it used? How much...

  11. SymposiumandIndustrialAffiliatesProgramLightinAction Industrial Affiliates Program

    E-Print Network [OSTI]

    Van Stryland, Eric

    Session I Abstract: Recently Additive Manufacturing (AM) has been hailed as the "third industrial Platform for precision additive manufacturing largely depends on the speed and accuracy of in-situ optical Dean & Director, CREOL, UCF Symposium: Light in Action Session I. Manufacturing 9:15 Advances

  12. Joint Stiffness Identification of Six-revolute Industrial Serial Robots Claire Dumas

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    the stiffness of industrial robots from robot manufacturers. As a consequence, this paper introduces a robust

  13. AI Industrial Engineering 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    This paper describes the California Energy Commission’s (Commission) energy policies and programs that save energy and money for California’s manufacturing and food processing industries to help retain businesses in-state and reduce greenhouse gases...

  14. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17T23:59:59.000Z

    Plant managers around the world are interested in improving the energy efficiency of their facilities while both growing and modernizing their manufacturing capabilities. Emerging industrial technologies, both at the ...

  15. Montana Employment Projections 2010 through 2020

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Montana Employment Projections 2010 through 2020 Produced by the Research and Analysis Bureau Department of Labor and Industry produces employment forecasts for job growth in upcoming years. These employment forecasts are primarily used by educational institutions (including both four- and two

  16. Establishing a virtual manufacturing environment for military robots

    E-Print Network [OSTI]

    Andersen, Ryan J. (Ryan John)

    2007-01-01T23:59:59.000Z

    Recent advances in the robotics industry have given the military an opportunity to capitalize on industry's innovation. Not only has core robotics technology improved but robotics manufacturing technology has also made ...

  17. Characterizing cost and performance of flexibility strategies in autobody manufacturing

    E-Print Network [OSTI]

    Povelaites, Jeffrey C

    2005-01-01T23:59:59.000Z

    Consumer demand is hard to predict in any industry, let alone the automotive industry. Vehicle manufacturers try to produce according to what their customers want, but if these wants change, the company is faced with lots ...

  18. Energy-Saving Opportunities for Manufacturing Enterprises (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-05-01T23:59:59.000Z

    This fact sheet English/Chinese describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help Chinese manufacturing enterprises reduce industrial energy intensity.

  19. Policies on Japan's Space Industry

    E-Print Network [OSTI]

    with space emerging countries 3. Step up leading-edge science and technology as an innovation engine (1Policies on Japan's Space Industry Shuichi Kaneko Director, Space Industry Office Manufacturing Industries Bureau Ministry of Economy, Trade and Industry (METI) #12;Japan's Space Policy is based

  20. Advanced Manufacturing Office: Smart Manufacturing Industry Day: Workshop Proceedings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1 AAcceleratedDepartment of Energy LWRThe DOE Office of Energy

  1. The dynamics of supply chains in the automotive industry

    E-Print Network [OSTI]

    Braese, Niklas

    2005-01-01T23:59:59.000Z

    This thesis looks at how supply chains in the automotive industry operate from the perspective of the manufacturers. The study includes the industry structure, the top players in the industry, factors that drive the industry, ...

  2. The State of the Industrial Compressor Market 

    E-Print Network [OSTI]

    Perry, W.

    1998-01-01T23:59:59.000Z

    Pneumatic, Worthington and Kellogg, to name a few) are gone. With Ingersoll-Rand's recent departure, Gardner Denver is the only U.S. company that manufactures an industrial, double-acting, reciprocating compressor. The dynamic compressor manufacturers face a...

  3. Manufacturability-Aware Physical Layout Optimizations

    E-Print Network [OSTI]

    Pan, David Z.

    design. To really bridge the gap between design and manufacturing, it is important to model and feed As VLSI technology continues to scale down to nanometer dimensions, the semiconductor industry is greatly reason is due to extensive usage of RET. The semiconductor industry is adopting the immersion lithography

  4. Ultratech Develops an Improved Lithography Tool for LED Wafer Manufacturing

    Broader source: Energy.gov [DOE]

    Ultratech modified an existing lithography tool used for semiconductor manufacturing to better meet the cost and performance targets of the high-brightness LED manufacturing industry. The goal was to make the equipment compatible with the wide range of substrate diameters and thicknesses prevalent in the industry while reducing the capital cost and the overall cost of ownership (COO).

  5. Life Cycle Assessment Practices: Benchmarking Selected European Automobile Manufacturers

    E-Print Network [OSTI]

    Boyer, Edmond

    Life Cycle Assessment Practices: Benchmarking Selected European Automobile Manufacturers Jean in the automobile industry where vehicle manufacturers (OEMs) are launching several new or re- vamped models each year. The automobile industry is therefore a very emblematic sector for best practices of LCA

  6. Melissa Luna Manager, Employer Relations

    E-Print Network [OSTI]

    worked in both higher education and the private sector as a recruiter. It was her responsibility candidates. To enhance her career counseling background, Melissa spent several years as assistant director in employer relations and academic advising, strengthening her ties to industry which has enabled her

  7. Energy Efficiency Improvement and Cost Saving Opportunities for the Glass Industry. An ENERGY STAR Guide for Energy and Plant Managers

    E-Print Network [OSTI]

    Worrell, Ernst

    2008-01-01T23:59:59.000Z

    Manufacturing Industries. Good Practice Guide 131. Unitedand their Controls. Good Practice Guide 252. United Kingdom.

  8. Transgender Employment Discrimination

    E-Print Network [OSTI]

    Koch, Katie; Bales, Richard

    2008-01-01T23:59:59.000Z

    regarding claims of employment discrimination. 47 It wasemployers from making employment decisions based on ayears after beginning employment with Eastern Airlines,

  9. STUDENT EMPLOYMENT AGREEMENT (Off Semester Employment)

    E-Print Network [OSTI]

    Oyet, Alwell

    STUDENT EMPLOYMENT AGREEMENT (Off Semester Employment) STUEMP 10/05 Personal Information Department Signature Date Employment Information Grant Holder Department Head Date Date I certify that the information Status Information * *Employing Departments are required to verify the status of recommended students

  10. Manufacturing Innovation in the DOE

    Broader source: Energy.gov (indexed) [DOE]

    Robert McEwan GE America Makes The National Accelerator for Additive Manufacturing & 3D Printing Advanced Manufacturing Office (AMO) manufacturing.energy.gov 13 Manufacturing...

  11. Making Industry Part of the Climate Solution

    SciTech Connect (OSTI)

    Lapsa, Melissa Voss [ORNL; Brown, Dr. Marilyn Ann [Georgia Institute of Technology; Jackson, Roderick K [ORNL; Cox, Matthew [Georgia Institute of Technology; Cortes, Rodrigo [Georgia Institute of Technology; Deitchman, Benjamin H [ORNL

    2011-06-01T23:59:59.000Z

    Improving the energy efficiency of industry is essential for maintaining the viability of domestic manufacturing, especially in a world economy where production is shifting to low-cost, less regulated developing countries. Numerous studies have shown the potential for significant cost-effective energy-savings in U.S. industries, but the realization of this potential is hindered by regulatory, information, workforce, and financial obstacles. This report evaluates seven federal policy options aimed at improving the energy efficiency of industry, grounded in an understanding of industrial decision-making and the barriers to efficiency improvements. Detailed analysis employs the Georgia Institute of Technology's version of the National Energy Modeling System and spreadsheet calculations, generating a series of benefit/cost metrics spanning private and public costs and energy bill savings, as well as air pollution benefits and the social cost of carbon. Two of the policies would address regulatory hurdles (Output-Based Emissions Standards and a federal Energy Portfolio Standard with Combined Heat and Power); three would help to fill information gaps and workforce training needs (the Superior Energy Performance program, Implementation Support Services, and a Small Firm Energy Management program); and two would tackle financial barriers (Tax Lien Financing and Energy-Efficient Industrial Motor Rebates). The social benefit-cost ratios of these policies appear to be highly favorable based on a range of plausible assumptions. Each of the seven policy options has an appropriate federal role, broad applicability across industries, utilizes readily available technologies, and all are administratively feasible.

  12. AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A

    E-Print Network [OSTI]

    AUTOMOTIVE INDUSTRY ANALYSIS Submitted by Team A Donald Bradley Morgan Bruns Adam Fleming Jay Ling on the automotive industry, specifically, large-scale manufacturers of automobiles. The automotive industry of the automotive industry. This is followed by an analysis of the industry's structural characteristics using

  13. Industrial and Process Efficiency Performance Incentives

    Broader source: Energy.gov [DOE]

    The New York State Energy Research and Development Authority (NYSERDA) offers the Industrial and Process Efficiency (IPE) Program to provide performance-based incentives to manufacturers and data...

  14. Assessment of Replicable Innovative Industrial Cogeneration Applicatio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for the Pulp and Paper, Chemical Manufacturing, and Petroleum Refining Industries Research & Development Roadmap: Next-Generation Appliances Cooling, Heating, and Power for...

  15. COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH

    SciTech Connect (OSTI)

    Roy Scandrol

    2003-10-01T23:59:59.000Z

    Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregates that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create nine (9) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry FGD technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.

  16. COMMERCIAL DEMONSTRATION OF THE MANUFACTURED AGGREGATE PROCESSING TECHNOLOGY UTILIZING SPRAY DRYER ASH

    SciTech Connect (OSTI)

    Roy Scandrol

    2003-04-01T23:59:59.000Z

    Universal Aggregates, LLC proposes to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the Universal Aggregates share is $12.3 (63%). The project team consists of CONSOL Energy Inc., P.J. Dick, Inc., SynAggs, LLC, and Universal Aggregates, LLC. The Birchwood Facility will transform 115,000 tons per year of spray dryer by-products that are currently being disposed of in an offsite landfill into 167,000 tons of a useful product, lightweight aggregates that can be used to manufacture lightweight aggregates that can be used to manufacture lightweight and medium weight masonry blocks. In addition to the environmental benefits, the Birchwood Facility will create eight (8) manufacturing jobs plus additional employment in the local trucking industry to deliver the aggregate to customers or reagents to the facility. A successful demonstration would lead to additional lightweight aggregate manufacturing facilities in the United States. There are currently twenty-one (21) spray dryer facilities operating in the United States that produce an adequate amount of spray dryer by-product to economically justify the installation of a lightweight aggregate manufacturing facility. Industry sources believe that as additional scrubbing is required, dry flue gas desulfurization (FGD) technologies will be the technology of choice. Letters from potential lightweight aggregate customers indicate that there is a market for the product once the commercialization barriers are eliminated by this demonstration project.

  17. INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering and business principles of physical and human resources. These engineers are involved in developing manufacturing systems to help companies compete in todays global marketplace. The Industrial and Systems engineers task is to take limited

  18. Industrial & Manufacturing Processes | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hydrogen Fuel at Lower Cost Facilitates the analysis of trace impurities in high-pressure hydrogen streams Replaces costly analytical equipment with inexpensive, easy-to-operate,...

  19. Industrial Scale Demonstration of Smart Manufacturing Achieving...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Partners University of Texas at Austin Austin, TX Principal Investigator: Thomas Edgar Email: edgar@che.utexas.edu University of California, Los Angeles Los Angeles, CA...

  20. Industrial Scale Demonstration of Smart Manufacturing Achieving

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking of BlytheDepartment of EnergyTreatment andJuneJobs

  1. Advanced Manufacturing Office (Formerly Industrial Technologies Program) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platform is alwaysISO 50001Energy EfficiencyFossil Energyof EnergyDepartment

  2. Advanced Manufacturing Office (Formerly Industrial Technologies Program)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1 AAcceleratedDepartment of Energy LWR Nuclear Fuel2(Formerly

  3. NNMI Industry Day: Smart Manufacturing AMO Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in Many Devils Wash, Shiprock,Department of Energy 2 DOENLC Annual1 |

  4. Manufacturing improvements in the Photovoltaic Manufacturing Technology (PVMaT) Project

    SciTech Connect (OSTI)

    Witt, C.E.; Mitchell, R.L.; Thomas, H.P.; Symko, M.I. [National Renewable Energy Lab., Golden, CO (United States); King, R. [Dept. of Energy, Washington, DC (United States); Ruby, D.S. [Sandia National Labs., Albuquerque, NM (United States)

    1998-08-01T23:59:59.000Z

    The Photovoltaic Manufacturing Technology Project (PVMaT) is a government/industry research and development (R and D) partnership between the US federal government (through the US Department of Energy [DOE]) and members of the US PV industry. The goals of PVMaT are to help the US PV industry improve module manufacturing processes and equipment; accelerate manufacturing cost reductions for PV modules, balance-of-systems components, and integrated systems; increase commercial product performance and reliability; and enhance the investment opportunities for substantial scale-ups of US-based PV manufacturing plant capacities. The approach for PVMaT has been to cost-share risk taking by industry as it explores new manufacturing options and ideas for improved PV modules and other components, advances system and product integration, and develops new system designs, all of which will lead to overall reduced system life-cycle costs for reliable PV end products. The PVMaT Phase 4A module manufac turing R and D projects are just being completed, and initial results for the work directed primarily to module manufacture are reported in this paper. Fourteen new Phase 5A subcontracts have also just been awarded, and planned R and D areas for the ten focused on module manufacture are described. Finally, government funding, subcontractor cost-sharing, and a comparison of the relative efforts by PV technology throughout the PVMaT project are presented.

  5. Ohio Advanced Energy Manufacturing Center

    SciTech Connect (OSTI)

    Kimberly Gibson; Mark Norfolk

    2012-07-30T23:59:59.000Z

    The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall industry health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries and high temperature heat exchangers. It also included a novel advanced weld trainer that EWI

  6. Green Industrial Policy: Trade and Theory

    E-Print Network [OSTI]

    Karp, Larry; Stevenson, Megan

    2012-01-01T23:59:59.000Z

    and solar panels, and the renewables industry employs well over a million workers (NYT Bradsher, The opportunity cost

  7. Fact #784: June 17, 2013 Direct Employment of Motor Vehicle Parts...

    Broader source: Energy.gov (indexed) [DOE]

    some level of employment supported by this industry. The top five states including Michigan, Ohio, Indiana, Tennessee, and Kentucky accounted for nearly half of the employment...

  8. The industrial ecology of the iron casting industry

    E-Print Network [OSTI]

    Jones, Alissa J. (Alissa Jean)

    2007-01-01T23:59:59.000Z

    Metal casting is an energy and materials intensive manufacturing process, which is an important U.S. industry. This study analyzes iron casting, in particular, for possible improvements that will result in greater efficiencies ...

  9. Design of multifunctional paired robots engaged across a thin plate for aircraft manufacturing and maintenance

    E-Print Network [OSTI]

    Karasic, Geoffrey Ian

    2011-01-01T23:59:59.000Z

    The aircraft industry lacks an automated system for wing box manufacturing and maintenance. Currently workers assemble and inspect thousands of fasteners in the wing structure by hand. This manufacturing process consumes ...

  10. Fact #570: May 11, 2009 Automotive Manufacturing Employment Declining |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport in RepresentativeDepartment of Energy ScoreEnergy 9: May 4, 2009

  11. Adaptive Robot Design and Applications in Flexible Manufacturing Environments

    E-Print Network [OSTI]

    manufacturing environments. However, state-of-art industrial robots with high accuracy are rather costly is needed. Rather than designing an industrial robot for each given application, ARFLEX aims at providing IT systems, existing industrial robot's accuracy and adaptability can be enhanced at the same time

  12. Flexibility in Aerospace and Automotive Component Manufacturing Systems

    E-Print Network [OSTI]

    de Weck, Olivier L.

    Traditionally, parts fabrication in the aerospace and automotive industries has been associated with a number for the aerospace and automotive industries. The thesis lays out a set of generic flexibility strategies and sets I could receive an impression of manufacturing in today's automotive and aerospace industry

  13. Sponsors of CIEEDAC: Environment Canada, Natural Resources Canada, Canadian Industry Program for Energy Conservation, Aluminium Industry Association, Canadian Chemical Producers' Association, Canadian Electricity

    E-Print Network [OSTI]

    for Energy Conservation, Aluminium Industry Association, Canadian Chemical Producers' Association, Canadian Data: Canadian Iron and Steel and Ferro-Alloy Manufacturing Industries, published by CIEEDAC annually

  14. RRR Niobium Manufacturing Experience

    SciTech Connect (OSTI)

    Graham, Ronald A. [ATI Wah Chang, An Allegheny Technologies Company, Albany, Oregon 97321 (United States)

    2007-08-09T23:59:59.000Z

    ATI Wah Chang has been manufacturing RRR niobium for more than 30 years using electron beam melting techniques. Fabricated forms include plate, sheet, foil, bar, rod and tubing. This paper provides manufacturing information.

  15. The Advanced Manufacturing Partnership

    E-Print Network [OSTI]

    Das, Suman

    ;ve Manufacturing Technologies (led by Dow, Honeywell and MIT) Manufacturing Ins;tutes (led, Honeywell and MIT GOALS § To launch public-private ini:a:ves to advance transforma

  16. A new DFM approach to combine machining and additive manufacturing

    E-Print Network [OSTI]

    Kerbrat, Olivier; Hascoët, Jean-Yves; 10.1016/j.compind.2011.04.003

    2011-01-01T23:59:59.000Z

    Design For Manufacturing (DFM) approaches aim to integrate manufacturability aspects during the design stage. Most of DFM approaches usually consider only one manufacturing process, but products competitiveness may be improved by designing hybrid modular products, in which products are seen as 3-D puzzles with modules realized aside by the best manufacturing process and further gathered. A new DFM system is created in order to give quantitative information during the product design stage of which modules will benefit in being machined and which ones will advantageously be realized by an additive process (such as Selective Laser Sintering or laser deposition). A methodology for a manufacturability evaluation in case of a subtractive or an additive manufacturing process is developed and implemented in a CAD software. Tests are carried out on industrial products from automotive industry.

  17. Dow EmployAbility Internship Programme 2014

    E-Print Network [OSTI]

    Nabben, Reinhard

    Dow EmployAbility Internship Programme 2014 Start Date Flexible Duration 3 to 12 months Location and graduates of any degree discipline. Some internship projects require chemistry, chemical engineering, biological science or logistics qualifications Compensation Meets or exceeds minimum wage at the internship

  18. UMass Lowell's Student Employment

    E-Print Network [OSTI]

    Massachusetts at Lowell, University of

    1 UMass Lowell's Student Employment Handbook for Students Office of Student Employment 883 Broadway St Dugan Hall Room 102 Lowell, MA (P) 978-934-4228 (F) 978-934-3009 Student_Jobs@uml.edu http://www.uml.edu/FinancialAid/employment/ #12;2 Table of Contents Introduction to the Student Employment Programs

  19. E3: Education, Experience, Employment The Economic Ladder to Success

    SciTech Connect (OSTI)

    Anne L Seifert

    2011-10-01T23:59:59.000Z

    Science, Technology, Engineering, and Math (STEM) literate citizenry is critical for Idaho's economy to effectively compete and grow in today's global marketplace and enhance Idaho workforce capabilities. Idaho's blueprint presents a collaboration design developed by a group of Idaho stakeholders including state level (STEM) educators, state and federal government, other agencies, and industry across the state. The purpose the Idaho Learn and Earn Blueprint Design is to describe a comprehensive plan for improving STEM education in Idaho through a collaborative partnerships and a series of grant supported projects underpinning this strategic design process building pathways to overcome hurdles in today's economy, and moving communities and families up their economic ladder. The Idaho Learn and Earn Blueprint Design focuses on three industry sectors; energy, advanced manufacturing, and health care. All are important in Idaho and have room for job growth potential among both displaced workers and graduates. Representatives from each sector are members of the design team and assist in developing grants and implementing the actions outlined in the design as the program goes forward. Idaho's current programs are generally institution specific. Each of the state's two-year colleges, along with regional groups and employers, are already working towards improving STEM education across the state. A key aspect of this design is to bring these groups together to focus on four unique goals: (1) Providing industry driven curriculum directly tied to skill based career needs; (2) Enhancing collaboration among stakeholders; (3) Providing access to learn and earn programs; and (4) Improving public and student awareness and interest in targeted industry sector career and educational opportunities.

  20. Capacity analysis, cycle time optimization, and supply chain strategy in multi-product biopharmaceutical manufacturing operations

    E-Print Network [OSTI]

    Fetcho-Phillips, Kacey L. (Kacey Lynn)

    2011-01-01T23:59:59.000Z

    Application of system optimization theory, supply chain principles, and capacity modeling are increasingly valuable tools for use in pharmaceutical manufacturing facilities. The dynamics of the pharmaceutical industry - ...

  1. Alternative Representations of Statistical Measures in Computer Tools to Promote Communication between Employees in Automotive Manufacturing

    E-Print Network [OSTI]

    Bakker, Arthur; Kent, Phillip; Noss, Richard; Hoyles, Celia

    2009-01-01T23:59:59.000Z

    and to lower costs. The automotive industry is a leadingcontrol (SPC) in an automotive assembly plant. Assumevery significant for automotive manufacture as the principle

  2. Enabling manufacturing flexibility issue resolution in advanced vehicle development

    E-Print Network [OSTI]

    Tomlin, Grace C. (Grace Catherine)

    2008-01-01T23:59:59.000Z

    Manufacturing Flexibility is a broad term used to describe a metric that can be measured in many different ways. Current industry experts agree that Flexibility is one of the key measures that will help the automotive ...

  3. The business case for continuous manufacturing of pharmaceuticals

    E-Print Network [OSTI]

    Wilburn, Kristopher Ray

    2010-01-01T23:59:59.000Z

    Manufacturing in the pharmaceutical industry is presently characterized as a batch production system, which has existed in its current form for decades. This structure is the result of historical regulatory policy as well ...

  4. The design, manufacturing and use of economically friendly injection molds

    E-Print Network [OSTI]

    Buchok, Aaron (Aaron J.)

    2008-01-01T23:59:59.000Z

    Much of the polymer manufacturing done today involves the process of injection molding. It can be difficult to gain experience in the art of designing and building tooling for this process outside of industry. The goal of ...

  5. Assessing the drivers of regional trends in solar photovoltaic manufacturing

    E-Print Network [OSTI]

    Goodrich, Alan C.

    The photovoltaic (PV) industry has grown rapidly as a source of energy and economic activity. Since 2008, the average manufacturer-sale price of PV modules has declined by over a factor of two, coinciding with a significant ...

  6. International photovoltaic products and manufacturers directory, 1995

    SciTech Connect (OSTI)

    Shepperd, L.W. [ed.] [Florida Solar Energy Center, Cocoa, FL (United States)] [ed.; Florida Solar Energy Center, Cocoa, FL (United States)

    1995-11-01T23:59:59.000Z

    This international directory of more than 500 photovoltaic-related manufacturers is intended to guide potential users of photovoltaics to sources for systems and their components. Two indexes help the user to locate firms and materials. A glossary describes equipment and terminology commonly used in the photovoltaic industry.

  7. Manufacturing fuel-switching capability, 1988

    SciTech Connect (OSTI)

    Not Available

    1991-09-01T23:59:59.000Z

    Historically, about one-third of all energy consumed in the United States has been used by manufacturers. About one-quarter of manufacturing energy is used as feedstocks and raw material inputs that are converted into nonenergy products; the remainder is used for its energy content. During 1988, the most recent year for which data are available, manufacturers consumed 15.5 quadrillion British thermal units (Btu) of energy to produce heat and power and to generate electricity. The manufacturing sector also has widespread capabilities to switch from one fuel to another for either economic or emergency reasons. There are numerous ways to define fuel switching. For the purposes of the Manufacturing Energy Consumption Survey (MECS), fuel switching is defined as the capability to substitute one energy source for another within 30 days with no significant modifications to the fuel-consuming equipment, while keeping production constant. Fuel-switching capability allows manufacturers substantial flexibility in choosing their mix of energy sources. The consumption of a given energy source can be maximized if all possible switching into that energy source takes place. The estimates in this report are based on data collected on the 1988 Manufacturing Energy Consumption Survey (MECS), Forms 846 (A through C). The EIA conducts this national sample survey of manufacturing energy consumption on a triennial basis. The MECS is the only comprehensive source of national-level data on energy-related information for the manufacturing industries. The MECS was first conducted in 1986 to collect data for 1985. This report presents information on the fuel-switching capabilities of manufacturers in 1988. This report is the second of a series based on the 1988 MECS. 8 figs., 31 tabs.

  8. Solid-State Lighting R&D Manufacturing Roadmap

    Broader source: Energy.gov [DOE]

    This document provides a description of activities the Department plans to undertake to accelerate manufacturing improvements that reduce costs and enhance the quality of SSL products, representing industry consensus on the expected evolution of SSL manufacturing, best practices, and opportunities for improvement and collaboration.

  9. Overview of the Photovoltaic Manufacturing Technology (PVMaT) project

    SciTech Connect (OSTI)

    Witt, C.E.; Mitchell, R.L.; Mooney, G.D.

    1993-08-01T23:59:59.000Z

    The Photovoltaic Manufacturing Technology (PVMaT) project is a historic government/industry photovoltaic (PV) manufacturing R&D partnership composed of joint efforts between the federal government (through the US Department of Energy) and members of the US PV industry. The project`s ultimate goal is to ensure that the US industry retains and extends its world leadership role in the manufacture and commercial development of PV components and systems. PVMaT is designed to do this by helping the US PV industry improve manufacturing processes, accelerate manufacturing cost reductions for PV modules, improve commercial product performance, and lay the groundwork for a substantial scale-up of US-based PV manufacturing capacities. Phase 1 of the project, the problem identification phase, was completed in early 1991. Phase 2, the problem solution phase, which addresses process-specific problems of specific manufacturers, is now underway with an expected duration of 5 years. Phase 3 addresses R&D problems that are relatively common to a number of PV companies or the PV industry as a whole. These ``generic`` problem areas are being addressed through a teamed research approach.

  10. INTERMOUNTAIN INDUSTRIAL ASSESSMENT CENTER

    SciTech Connect (OSTI)

    MELINDA KRAHENBUHL

    2010-05-28T23:59:59.000Z

    The U. S. Department of Energy’s Intermountain Industrial Assessment Center (IIAC) at the University of Utah has been providing eligible small- and medium-sized manufacturers with no-cost plant assessments since 2001, offering cost-effective recommendations for improvements in the areas of energy efficiency, pollution prevention, and productivity improvement.

  11. NEMS industrial module documentation report

    SciTech Connect (OSTI)

    Not Available

    1994-01-01T23:59:59.000Z

    The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2010) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of output of industrial activity. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  12. Low Cost Lithography Tool for High Brightness LED Manufacturing

    SciTech Connect (OSTI)

    Andrew Hawryluk; Emily True

    2012-06-30T23:59:59.000Z

    The objective of this activity was to address the need for improved manufacturing tools for LEDs. Improvements include lower cost (both capital equipment cost reductions and cost-ofownership reductions), better automation and better yields. To meet the DOE objective of $1- 2/kilolumen, it will be necessary to develop these highly automated manufacturing tools. Lithography is used extensively in the fabrication of high-brightness LEDs, but the tools used to date are not scalable to high-volume manufacturing. This activity addressed the LED lithography process. During R&D and low volume manufacturing, most LED companies use contact-printers. However, several industries have shown that these printers are incompatible with high volume manufacturing and the LED industry needs to evolve to projection steppers. The need for projection lithography tools for LED manufacturing is identified in the Solid State Lighting Manufacturing Roadmap Draft, June 2009. The Roadmap states that Projection tools are needed by 2011. This work will modify a stepper, originally designed for semiconductor manufacturing, for use in LED manufacturing. This work addresses improvements to yield, material handling, automation and throughput for LED manufacturing while reducing the capital equipment cost.

  13. EMPLOYMENT VERIFICATION LETTER Student's Name: ________________________________________________________

    E-Print Network [OSTI]

    Bolding, M. Chad

    Rev. 10/04 EMPLOYMENT VERIFICATION LETTER Student's Name: ________________________________________________________ (Family Name) (First) (Middle Initial) TO BE COMPLETED BY EMPLOYER OR HIRING DEPARTMENT: Employment Department__________________________________________________ Employment Position

  14. Energy-Saving Opportunities for Manufacturing Enterprises in China (International Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-10-01T23:59:59.000Z

    This English/Chinese brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help Chinese manufacturing facilities reduce industrial energy intensity.

  15. Energy-Saving Opportunities for Manufacturing Companies (English/Portuguese Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01T23:59:59.000Z

    This English/Portuguese brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  16. Energy-Saving Opportunities for Manufacturing Companies, International Fact Sheet (Spanish)

    SciTech Connect (OSTI)

    Not Available

    2010-08-01T23:59:59.000Z

    This English/Spanish fact sheet describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  17. Method and apparatus for manufacturing gas tags

    DOE Patents [OSTI]

    Gross, Kenny C. (Bolingbrook, IL); Laug, Matthew T. (Idaho Falls, ID)

    1996-01-01T23:59:59.000Z

    For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases.

  18. Method and apparatus for manufacturing gas tags

    DOE Patents [OSTI]

    Gross, K.C.; Laug, M.T.

    1996-12-17T23:59:59.000Z

    For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases. 4 figs.

  19. CASUAL EMPLOYMENT OF STUDENTS

    E-Print Network [OSTI]

    Victoria, University of

    CASUAL EMPLOYMENT OF STUDENTS University Policy No.: HR6300 Classification: Human Resources for the Casual Employment of Students PURPOSE 1.00 The purpose of this policy is to set out certain terms and conditions for hiring students for Casual Employment opportunities at the university. DEFINITIONS

  20. 2009 Solid-State Lighting Vancouver Manufacturing Workshop Highlights

    Broader source: Energy.gov [DOE]

    Well over 150 lighting industry leaders gathered in Vancouver, Washington, on June 24-25, 2009, for the second DOE Solid-State Lighting (SSL) Manufacturing Workshop. The primary purpose was to review and refine a "strawman" roadmap for SSL manufacturing, based on insights and recommendations from the first workshop, which was held in April in Fairfax, Virginia. These insights and recommendations focused on identifying and overcoming the key barriers to developing lower-cost, higher-quality SSL products. The outcome of both workshops will be a working roadmap to guide SSL manufacturing in general and to inform a new DOE manufacturing initiative.

  1. Solder technology in the manufacturing of electronic products

    SciTech Connect (OSTI)

    Vianco, P.T.

    1993-08-01T23:59:59.000Z

    The electronics industry has relied heavily upon the use of soldering for both package construction and circuit assembly. The solder attachment of devices onto printed circuit boards and ceramic microcircuits has supported the high volume manufacturing processes responsible for low cost, high quality consumer products and military hardware. Defects incurred during the manufacturing process are minimized by the proper selection of solder alloys, substrate materials and process parameters. Prototyping efforts are then used to evaluate the manufacturability of the chosen material systems. Once manufacturing feasibility has been established, service reliability of the final product is evaluated through accelerated testing procedures.

  2. Green alternatives to toxic release inventory (TRI) chemicals in the process industry

    SciTech Connect (OSTI)

    Ahmed, I.; Baron, J.; Hamilton, C. [Booz-Allen & Hamilton Inc., McLean, VA (United States)

    1995-12-01T23:59:59.000Z

    Driven by TRI reporting requirements, the chemical process industry is searching for innovative ways to reduce pollution at the source. Distinct environmental advantages of biobased green chemicals (biochemicals) mean are attractive alternatives to petrochemicals. Biochemicals are made from renewable raw materials in biological processes, such as aerobic and anaerobic fermentation, that operate at ambient temperatures and pressures, and produce only nontoxic waste products. Key TRI chemicals and several classes of commodity and intermediate compounds, used on consumer end-products manufacturing, are examined and alternatives are suggested. Specific substitution options for chlorofluorocarbons, industrial solvents, and commodity organic and inorganic chemicals are reviewed. Currently encouraged pollution prevention alternatives in the manufacturing sector are briefly examined for their long-term feasibility such as bioalternatives to bleaching in the pulp & paper industry, solvent cleaning in the electronics and dry cleaning industries, and using petroleum-based feedstocks in the plastics industry. Total life cycle and cost/benefit analyses are employed to determine whether biochemicals are environmentally feasible and commercially viable as pollution prevention tools. Currently available green chemicals along with present and projected costs and premiums are also presented. Functional compatibility of biochemicals with petrochemicals and bioprocessing systems with conventional chemical processing methods are explored. This review demonstrates that biochemicals can be used cost effectively in certain industrial chemical operations due to their added environmental benefits.

  3. Manufacturing | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the production of clean energy technologies like electric vehicles, LED bulbs and solar panels. The Department is also working with manufacturers to increase their energy...

  4. Locating Chicago Manufacturing

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    Renaissance Council, is among the nation's leading public high schools focused on manufac- turing area's econ- omy, including how important manufacturing is to that economy, which manufac- turing

  5. Improving Pumping System Performance: A Sourcebook for Industry, Second Edition

    SciTech Connect (OSTI)

    Not Available

    2006-05-01T23:59:59.000Z

    Prepared for the DOE Industrial Technologies Program, this sourcebook contains the practical guidelines and information manufacturers need to improve the efficiency of their pumping systems.

  6. Global Energy Efficient IT Equipment Industry 2015 Market Research...

    Open Energy Info (EERE)

    overview; industry policies and plans; product specifications; manufacturing processes; cost structures and so on. Then it analyzed the world's main region market conditions,...

  7. Global High-purity Pentoxide Industry 2015 Market Research Report...

    Open Energy Info (EERE)

    overview; industry policies and plans; product specifications; manufacturing processes; cost structures and so on. Then it analyzed the world's main region market conditions,...

  8. Meet Tony Simon, Another Industrial Assessment Center Student...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of the ITP, the Industrial Assessment Centers (IAC) provide energy, waste, and productivity assessments at no charge to small and mid-sized manufacturers while providing...

  9. CEMI Industrial Efficiency (text version) | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Industrial Efficiency and Energy Productivity Video. Well Legrand is a small to medium sized manufacturer. We make electronic products for power, light, and data in the...

  10. Energy Efficiency Improvement and Cost Saving Opportunities for the Petrochemical Industry - An ENERGY STAR(R) Guide for Energy and Plant Managers

    E-Print Network [OSTI]

    Neelis, Maarten

    2008-01-01T23:59:59.000Z

    manufacturing Resin, synthetic rubber, and artificialwith the resin and synthetic rubber manufacturing industry.Others 3252 Resins, synthetic rubber 3256 Soaps, cleaning

  11. EMPLOYMENT APPLICATION Montana State University

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    EMPLOYMENT APPLICATION Montana State University Central Agricultural Research Center 52583 US employed by any other department on campus? Yes No If so, which department? LOCAL ADDRESS;EMPLOYMENT HISTORY (begin with most recent) Employer: Employer: Supervisor: Supervisor: Address: Address

  12. NREL Manufacturing R&D Workshop NREL H2/FC Manufacturing R&D Workshop

    E-Print Network [OSTI]

    Trimming · Automated Dispensing · X-ray Wind PMD has built components for the wind industry focused In the following areas: · Blade Manufacturing · Tower component design and detailing · Tower component machining-part solar assemblies · Chip Placement ­ high speed and high precision · Curing · Flat glass material

  13. Fall Engineering Career Fair Employer List -October 3rd, 2013 1:00 p.m. 4:30 p.m. College of Engineering; First Floor

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Electromechanical Engineering Technology Industrial Engineering Mechanical Engineering #12;Mechanical Engineering Industrial Engineering Mechanical Engineering Mechanical Engineering Technology Manufacturing Engineering-ops Chemical Engineering Computer Engineering Electrical Engineering Industrial Engineering Mechanical

  14. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5, 2014 Employment Opportunities Seeking Lead Mentor for the ARM Soil Water and Temperature System (SWATS) Bookmark and Share The ARM Climate Research Facility is seeking an ARM...

  15. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 19, 2014 Employment Opportunities Radar Engineer for ARM Facility at PNNL Bookmark and Share Pacific Northwest National Laboratory is currently seeking a radar engineer...

  16. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    January 29, 2014 Employment Opportunities Research Position Available at Brookhaven National Laboratory Bookmark and Share The Environmental Sciences Department of Brookhaven...

  17. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    25, 2015 Employment Opportunities DOE Seeking ASR Program Manager Bookmark and Share DOE's Office of Biological and Environmental Research is hiring a second federal program...

  18. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 27, 2014 Employment Opportunities Postdoctoral Researcher Position Available at the University of Reading Bookmark and Share University of Reading Logo The University of...

  19. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    26, 2014 Employment Opportunities Supporting Scientist Positon for ARM at Lawrence Livermore National Laboratory Bookmark and Share llnl-logo The Cloud Processes Research (CPR)...

  20. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 13, 2015 Employment Opportunities NOAA Environmental Modeling Center seeking Support Scientist Bookmark and Share I.M. Systems Group (IMSG), a federal contractor, is...

  1. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5, 2014 Employment Opportunities University of Chicago's Computation Institute Seeks Postdoc Bookmark and Share The University of Chicago's Computation Institute is seeking a...

  2. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2014 Employment Opportunities University of Miami seeking Faculty in the Department of Atmospheric Sciences Bookmark and Share The Department of Atmospheric Sciences at the...

  3. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    31, 2014 Employment Opportunities Scientific Data Management Help Needed at Brookhaven Bookmark and Share The Environmental and Climate Sciences Department of Brookhaven National...

  4. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2014 Employment Opportunities LANL Seeking Radar Engineer for ARM Facility Bookmark and Share Los Alamos National Laboratory (LANL) is currently seeking a radar engineer...

  5. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 27, 2015 Employment Opportunities Columbia University Seeking Postdoctoral Research Scientist Bookmark and Share columbia Columbia University invites applications for a...

  6. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2014 Employment Opportunities Postdoctoral Researcher with National Center for Environmental Prediction Bookmark and Share The National Center for Environmental Prediction...

  7. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3, 2014 Employment Opportunities LecturerAssociate Professor in Clouds available at the University of Reading Bookmark and Share The University of Reading is seeking a scientist...

  8. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5, 2014 Employment Opportunities Brookhaven National Laboratory Inviting Applicants for Scientific Associate Bookmark and Share The Environmental and Climate Sciences Department...

  9. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    17, 2014 Employment Opportunities Brookhaven National Laboratory Seeking Advanced Applications Engineer Bookmark and Share The Environmental and Climate Sciences Department of...

  10. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9, 2014 Employment Opportunities Postdoctoral Position Available at LLNL Bookmark and Share The Cloud Processes Research Group at Lawrence Livermore National Laboratory (LLNL)...

  11. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 7, 2011 Employment Opportunities, Facility News DOE Graduate Fellowship Program Accepting Applications for 2012 Bookmark and Share The DOE Office of Science Graduate...

  12. ARM - Employment Opportunities Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 12, 2014 Employment Opportunities University of Wyoming Seeking Assistant Professor Bookmark and Share The Department of Atmospheric Science at the University of Wyoming...

  13. Manufacturing Licenses Available | Tech Transfer | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Deposition Manufacturing 201303127 Methods and Materials for Room Temperature Polymer Additive Manufacturing 201303140 Reactive Polymer Fused Deposition Manufacturing 201303151...

  14. Telematics industry dynamics and strategies for converging technologies

    E-Print Network [OSTI]

    Luis, Rodrigo, 1973-

    2004-01-01T23:59:59.000Z

    The Telematics Industry faces tremendous challenges for growth. Regardless of the efforts and investment from vehicle manufacturers and suppliers, telematics has not been that profitable industry that many analyst forecasted ...

  15. Supply chain network optimization : low volume industrial chemical product

    E-Print Network [OSTI]

    Dacha, Fred (Frederick Omondi)

    2013-01-01T23:59:59.000Z

    The chemical industry is a highly competitive and low margin industry. Chemical transportation faces stringent safety regulations meaning that Cost-To-Serve (C2S), costs associated with products net flow from manufacturers ...

  16. Profile of the chemicals industry in California: Californiaindustries of the future program

    SciTech Connect (OSTI)

    Galitsky, Christina; Worrell, Ernst

    2004-06-01T23:59:59.000Z

    The U.S. Department of Energy (DOE) Office of Industrial Technologies (OIT) established the Industries of the Future (IOF) program to increase energy efficiency, reduce waste production and to improve competitiveness, currently focusing on nine sectors. The IOF is a partnership strategy involving industry, the research community and the government, working together to identify technology needs, promote industrial partnerships and implement joint measures with all partners involved. The State Industries of the Future (SIOF) program delivers the accomplishments of the national Industries of the Future strategy to the local level, to expand the technology opportunities to a larger number of partners and reach smaller businesses and manufacturers that were not initially involved in the IOF effort. The state programs bring together industry, academia, and state agencies to address the important issues confronting industry in the state. These public-private coalitions facilitate industry solutions locally and enhance economic development. California has started a State Industries of the Future effort, in collaboration with the U.S. Department of Energy. The California Energy Commission (CEC) is leading the SIOF program in California, as part of many other programs to improve the energy efficiency and performance of industries in California. The California State IOF program aims to build a network of participants from industry, academia and government in four selected industrial sectors as a basis for the development of a strategic partnership for industrial energy efficient technology in the state. In California the IOF effort focuses petroleum refining, chemical processing, food processing and electronics. As part of this effort, the SIOF program will develop roadmaps for technology development for the selected sectors. On the basis of the roadmap, the program will develop successful projects with co-funding from state and federal government, and promote industry-specific energy-efficiency. An important element of the SIOF-program is the preparation of R&D roadmaps for each of the selected industries. The roadmap will help to identify priority needs for the participating industries to meet their energy challenges. The roadmap effort builds on the roadmaps developed by DOE, and on the conditions specific for the industry in California. Key to the successful preparation of a roadmap in the selected industries is the development of a profile of the industries. The profile provides a basis for the participants in the roadmap-effort, especially as the structure of the industries in California can be different than in the nation. The sector profiles describe the current economic and energy situation of these industries in California, the processes and energy uses, and the potential future developments in each industry. The profiles are an integral part of the roadmap, to help working group partners to evaluate the industry's R&D needs for their industry in California. In this report, we focus on the chemicals industry. The industry is an important economic factor in the state, providing over 82,300 jobs directly, and more in indirect employment. Value of shipments in 2001 was just under $25.7 Billion, or 6% of all manufacturing in California. There are over 1,500 chemical plants in California, of which 52% are pharmaceutical companies. Many companies operate chemical plants in California. The industry consumes 8% of the electricity and 5% of the natural gas in California. In this report, we start with a description of the chemical industry in the United States and California. This is followed by a discussion of the energy consumption and energy intensity of the Californian chemical industry. Chapter 3 focuses on the main sub-sectors. For each of the sub-sectors a general process description is provided in Chapter 4. Based on this analysis, in Chapter 5, we discuss potential technology developments that can contribute to further improving the energy efficiency in chemical plants, with a focus on the situation in California.

  17. EEO Employment Data Allegheny County

    E-Print Network [OSTI]

    Sibille, Etienne

    EEO Employment Data for Allegheny County and the Pittsburgh region February 2008 University Center................................................................................................................. 2 Employment Summary by EEO Occupation Group............................................................................... 3 Employment by Detail Census Occupation Category

  18. Employment Discrimination against LGBT Utahns

    E-Print Network [OSTI]

    Rosky, Clifford; Mallory, Christy; Smith, Jenni; Badgett, M.V. Lee

    2011-01-01T23:59:59.000Z

    19. THE WILLIAMS INSTITUTE EMPLOYMENT DISCRIMINATION AGAINSTBrad Sears, Evidence of Employment Discrimination on theOF THE WILLIAMS INSTITUTE EMPLOYMENT DISCRIMINATION AGAINST

  19. Industrial Permit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Protection Obeying Environmental Laws Industrial Permit Industrial Permit The Industrial Permit authorizes the Laboratory to discharge point-source effluents under the...

  20. Manufacturing Demonstration Facility Technology Collaborations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    advanced manufacturing and materials technologies for commercial applications related to additive manufacturing or carbon fiber and composites will have the highest likelihood of...

  1. Innovative Manufacturing Initiative Recognition Day

    Broader source: Energy.gov [DOE]

    The Innovative Manufacturing Initiative (IMI) Recognition Day (held in Washington, DC on June 20, 2012) showcased IMI projects selected by the Energy Department to help American manufacturers...

  2. Wind Turbine Manufacturing Process Monitoring

    SciTech Connect (OSTI)

    Waseem Faidi; Chris Nafis; Shatil Sinha; Chandra Yerramalli; Anthony Waas; Suresh Advani; John Gangloff; Pavel Simacek

    2012-04-26T23:59:59.000Z

    To develop a practical inline inspection that could be used in combination with automated composite material placement equipment to economically manufacture high performance and reliable carbon composite wind turbine blade spar caps. The approach technical feasibility and cost benefit will be assessed to provide a solid basis for further development and implementation in the wind turbine industry. The program is focused on the following technology development: (1) Develop in-line monitoring methods, using optical metrology and ultrasound inspection, and perform a demonstration in the lab. This includes development of the approach and performing appropriate demonstration in the lab; (2) Develop methods to predict composite strength reduction due to defects; and (3) Develop process models to predict defects from leading indicators found in the uncured composites.

  3. Uranium industry annual 1998

    SciTech Connect (OSTI)

    NONE

    1999-04-22T23:59:59.000Z

    The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

  4. Uranium industry annual 1994

    SciTech Connect (OSTI)

    NONE

    1995-07-05T23:59:59.000Z

    The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

  5. Employment Status -All Respondents Full-time Employment -36%

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    1 36% 4% 10% 28% 5% 5% 2% 1% 1% 8% Employment Status - All Respondents Full-time Employment - 36% Part-time Employment - 4% Continuing Current Employment - 10% Postdoctoral Fellowship - 28% Medical Residency (MD/PhDs) - 5% Full-time Graduate Studies - 5% Self-Employed - 2% Temporary Employment - 1% Other

  6. Cash Flow Impacts of Industrial Steam Efficiency

    E-Print Network [OSTI]

    Russell, C.

    of thermal transfer tasks within the majority of manufacturing industries, it is widely perceived as a "support" utility. In other words, steam is considered a power source subordinate to process lines that are the real focus of manufacturing activity... be directed to productive functions, enabling the plant to extend production runs or perhaps even begin new product lines. RETURN ON INVESTMENT Global competition and decentralized corporate structures provide formidable challenges for manufacturing...

  7. The Solarex Solar Power Industrial Facility

    E-Print Network [OSTI]

    Macomber, H. L.; Bumb, D. R.

    1984-01-01T23:59:59.000Z

    The Solarex Corporation has designed, built and operated an industrial facility which is totally powered by a Solarex solar electric power system. The solar power system, energy-conserving building and manufacturing operations were treated as a...

  8. Lean enterprise in the construction industry

    E-Print Network [OSTI]

    Marchini-Blanco, Juan, 1971-

    2004-01-01T23:59:59.000Z

    This thesis explores the application of the Lean Enterprise Model (LEM) to construction firms. LEM is a framework derived from lean manufacturing principles by MIT's Lean Aerospace Initiative (LAI) for the aerospace industry. ...

  9. Reporting Conservation Results in the Chemical Industry

    E-Print Network [OSTI]

    Doerr, R. E.

    1979-01-01T23:59:59.000Z

    In 1974, the Manufacturing Chemists Association (MCA) developed an energy rate method for reporting the energy conservation results of the chemical industry to the Federal Energy Administration. The MCA Energy Rate Method has served as a model...

  10. CIMplementation™: Evaluating Manufacturing Automation

    E-Print Network [OSTI]

    Krakauer, J.

    management and labor. In the new shop, ma~? agers will be unable to succeed unless thet earn the respect and cooperation of their I subordinates. Managers need to address th~ fear and resistance of manufacturing emPlofees before and during a transition.... Managers are becoming more interested in these methods, but they should be aware that implementing them will be a slow, complex task. This technology will require changes in manufacturing organization. This paper discusses changes required...

  11. EMPLOYMENT VERIFICATION LETTER Student's Name: ________________________________________________________

    E-Print Network [OSTI]

    Bolding, M. Chad

    Rev. 10/04 EMPLOYMENT VERIFICATION LETTER Student's Name: ________________________________________________________ (Family Name) (First) (Middle Initial) TO BE COMPLETED BY EMPLOYER OR HIRING DEPARTMENT: Employment Department_ Clemson University ________________________________ Employment Posn Title

  12. STUDENT EMPLOYMENT Student Involvement Outcomes

    E-Print Network [OSTI]

    de Lijser, Peter

    STUDENT EMPLOYMENT Student Involvement Outcomes reflective assessment High impact practices. Employment Structure ASI employs approximately 645 staff, interns, and volunteers on average during the fall and spring semesters. In spring 2013, ASI employed: · 42 Interns · 59 Professional Staff Members · 162

  13. National Skills Assessment of the U.S. Wind Industry in 2012

    SciTech Connect (OSTI)

    Levanthal, M.; Tegen, S.

    2013-06-01T23:59:59.000Z

    A robust workforce is essential to developing domestic wind power projects, including manufacturing, siting, operations, maintenance, and research capabilities. The purpose of our research is to better understand today's domestic wind workforce, projected workforce needs as the industry grows, and how existing and new programs can meet the wind industry's future education and training needs. Results presented in this report provide the first published investigation into the detailed makeup of the wind energy workforce, educational infrastructure and training needs of the wind industry. Insights from this research into the domestic wind workforce will allow the private sector, educational institutions, and federal and state governmental organizations to make workforce-related decisions based on the current employment and training data and future projections in this report.

  14. Industrial Assessment Center

    SciTech Connect (OSTI)

    Dr. Diane Schaub

    2007-03-05T23:59:59.000Z

    Since its inception, the University of Florida Industrial Assessment Center has successfully completed close to 400 energy assessments of small to medium manufacturing facilities in Florida, southern Georgia and southern Alabama. Through these efforts, recommendations were made that would result in savings of about $5 million per year, with an implementation rate of 20-25%. Approximately 80 engineering students have worked for the UF-IAC, at least 10 of whom went on to work in energy related fields after graduation. Additionally, through the popular course in Industrial Energy Management, many students have graduated from the University of Florida with a strong understanding and support of energy conservation methods.

  15. Globalization of biopharmaceutical manufacturing

    E-Print Network [OSTI]

    Pande, Rachna

    2011-01-01T23:59:59.000Z

    The biomanufacturing industry is changing due to increasing globalization. However, it is changing differently from other high tech industries like software/ semiconductor/ automobiles. In this study we use global ...

  16. Disability Employment Awareness Month

    Broader source: Energy.gov [DOE]

    Utilizing the talents of all Americans is essential for our Nation to out-innovate, out-educate, and out-build the rest of the world.  During National Disability Employment Awareness Month, we...

  17. Manufactured Home Energy Audit user`s manual

    SciTech Connect (OSTI)

    NONE

    1997-09-01T23:59:59.000Z

    The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the US Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA displays a colorful, graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes.

  18. Employer`s contributions to the training of professional statisticians

    SciTech Connect (OSTI)

    Rustagi, J.S. [Ohio State Univ., Columbus, OH (United States). Statistics Dept.; Wright, T. [Oak Ridge National Lab., TN (United States). Mathematical Sciences Section]|[Bureau of the Census, Washington, DC (United States)

    1995-07-01T23:59:59.000Z

    Statistical science provides important techniques for decision making in a large variety of fields of human endeavor mainly through statistical practice. According to Deming (1965), ``Statistical practice is mostly a collaborative venture between (professional) statisticians and experts in subject-matter (area).`` The professional statistician must be properly trained in areas of statistical science most suited to the discipline in which the applications are made. Due to a large variety of applications. The education of a professional statistician by universities can only be very general. Higher education provides the theoretical basis of statistical science whereas the specific expertise needed by the professional statistician is given by the application areas. In this paper, the authors review the approach of academic programs which are geared towards applications and discuss some of the innovative strategies for preparing statisticians as consultants in industry and business. A survey (census) of statisticians at the national laboratories of the US Department of Energy was made to assess their training by universities and to get a broad view of additional training which has brought them to their present professional status. A particular interest is the extent to which employers have contributed to the training of statisticians. A few recommendations are made which may serve to improve the future training of statisticians for applied collaborative work by universities and employers.

  19. Emerging Opportunities in Industrial Electrification Technologies 

    E-Print Network [OSTI]

    Schmidt, P. S.

    1989-01-01T23:59:59.000Z

    in the manufacturing sector. Nearly half of manufacturing energy use was in the process industries, which include chemicals, petroleum products, pulp and paper, foods, textiles, and tobacco. Metals production, primarily aluminum and steel, accounted for about 21... %, and metals fabrication, including transportation, machinery, instrumentation and electronics, and other metal products, about 19%. The balance of about 14% was used in other non-metals industries, such as stone, clay, and glass, rubber and plastics...

  20. What can I do with this major? AREAS EMPLOYERS

    E-Print Network [OSTI]

    Escher, Christine

    Quality assurance Materials Management: Purchasing/buying Traffic management Inventory management DevelopSTRATEGIES What can I do with this major? AREAS EMPLOYERS MANAGEMENT HUMAN RESOURCE MANAGEMENT MANAGEMENT Business and industry including: Banks and financial institutions Retail stores Restaurants Hotels

  1. industrial & systems (ISE) Industrial and Systems Engineers use engineering and business prin-

    E-Print Network [OSTI]

    Rohs, Remo

    70 industrial & systems (ISE) Industrial and Systems Engineers use engineering and business prin waste of physical and human resources. These engineers are involved in developing manufacturing systems to help companies compete in today's global marketplace. The Industrial and Systems Engineer's task

  2. Measuring and Understanding Energy Efficiency Changes in Manufacturing

    E-Print Network [OSTI]

    French, D. K.; Carlson, L. T.

    from a series of industrial roundlable discussions Consumption Survey (MECS) is the survey vchicle conducted by Energy Information Administration (EIA). In specifically designed for the manufacturing industrics. addition, anticipated future data... related to efriciency, technology MECS uata have been used to assess energy efficiency in penetralion, and implementatiun of demand-side management manufacturing, and further analysis of this issue is aCI ivi tics are discussed. forthcoming...

  3. Neural network based design of cellular manufacturing systems

    E-Print Network [OSTI]

    Ramachandran, Satheesh

    1990-01-01T23:59:59.000Z

    NEURAL NETWORK BASED DESIGN OF CELLULAR MANUFACTURING SYSTEMS A Thesis by SATHEESH RAMACHANDRAN Submitted to the Office of Graduate Studies of' Texas ASM University in partial fulfilltnent of the requirements for the degree of MASTER... OF SCIENCE December 1990 Major Subject: Industrial Engineering NEURAL NETWORK BASED DESIGN OF CELLULAR MANUFACTURING SYSTEMS A Thesis by SATHEESH RAMACHAiVDRAN Approved as to style and content by: Ce r O. Malav (Chair of Committee) T. Hsing...

  4. Manufacturing Demonstration Facilities Workshop Agenda, March...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Manufacturing Demonstration Facility Workshop Critical Materials Workshop Agenda Innovative Manufacturing Initiatives Recognition Day...

  5. Clean Energy Manufacturing Initiative Solid-State Lighting

    SciTech Connect (OSTI)

    Thomas, Sunil; Edmond, John; Krames, Michael; Raman, Sudhakar

    2014-09-23T23:59:59.000Z

    The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase yields, and lower costs.

  6. Clean Energy Manufacturing Initiative Solid-State Lighting

    ScienceCinema (OSTI)

    Thomas, Sunil; Edmond, John; Krames, Michael; Raman, Sudhakar

    2014-12-03T23:59:59.000Z

    The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase yields, and lower costs.

  7. Uranium industry annual 1996

    SciTech Connect (OSTI)

    NONE

    1997-04-01T23:59:59.000Z

    The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

  8. Advanced Manufacture of Reflectors

    Broader source: Energy.gov [DOE]

    The Advance Manufacture of Reflectors fact sheet describes a SunShot Initiative project being conducted research team led by the University of Arizona, which is working to develop a novel method for shaping float glass. The technique developed by this research team can drastically reduce the time required for the shaping step. By enabling mass production of solar concentrating mirrors at high speed, this project should lead to improved performance and as much as a 40% reduction in manufacturing costs for reflectors made in very high volume.

  9. Manufacturing Success Stories

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2:Introduction to EnergyDepartment of EnergyManagementORNL isManufacturingManufacturing6

  10. EMPLOYMENT APPLICATION Montana State University

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    EMPLOYMENT APPLICATION Montana State University Western Triangle Ag Research Center 9546 Old Shelby employed by any other department on campus? Yes No If so, which department? Availability (Check those which) 1 2 3 4 College Major: EMPLOYMENT HISTORY (begin with most recent) Employer: Employer: Supervisor

  11. Undergraduate Student Employment Opportunities

    E-Print Network [OSTI]

    opportunities for networking and professional development, and student researchers are expected to takeUndergraduate Student Employment Opportunities Are you interested in spending your summer doing research in the Northwoods? Bioeconomics of Aquatic Invasive Species Our NSF-funded research project

  12. Additive Manufacturing Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    market by industrial companies, 58 including the Electro Optical Systems (EOS) in Germany, Arcam in Sweden, MCP Tooling Technologies in 59 the UK, and Stratasys, 3D Systems,...

  13. Industrial Decision Making- Improving Petroleum Refining Performance through Better Economic Performance Analysis

    E-Print Network [OSTI]

    Mergens, E. H.

    Industrial manufacturing performance, to be efficient, must be measured against identifiable goals. The management of the plant must be charged to meet specific objectives. The typical goal for a manufacturing plant is usually to produce a quality...

  14. A real options approach to manage flexible contracts in the telecommunication networking industry

    E-Print Network [OSTI]

    Tay, Ee Learn, 1968-

    2004-01-01T23:59:59.000Z

    One of the biggest challenges facing Original Equipment Manufacturers (OEMs) and Electronic Manufacturing Services (EMS) providers in the telecommunication networking industry is to predict the spending patterns of the ...

  15. Certificate Industrial and Systems Engineering

    E-Print Network [OSTI]

    Su, Xiao

    Six Sigma Certificate Industrial and Systems Engineering San José State University September, 2008 #12;1 Lean Enterprise and Six Sigma Lean Enterprise about transforming the old mass production-to-cradle design, incorporating design for manufacturability, reproducibility, product lifecycle, etc. Six Sigma

  16. MANUFACTURING & SERVICE OPERATIONS MANAGEMENT

    E-Print Network [OSTI]

    Chiang, Wei-yu Kevin

    an upstream firm, as a result of charging a wholesale price above the marginal cost, induces its intermediary Dynamics and Channel Efficiency in Durable Product Pricing and Distribution Wei-yu Kevin Chiang College the single-period vertical price interaction in a manufacturer­retailer dyad to a multi- period setting

  17. Bolt Manufacture: Process Selection

    E-Print Network [OSTI]

    Colton, Jonathan S.

    file · Selective Laser Sintering (SLS) 3 D P i ti· 3-D Printing · Light Engineered Net Shaping (LENS Processes and Systems Prof. J.S. Colton © GIT 2009 20 #12;3D Printing Process (Soligen) ME 6222: Manufacturing Processes and Systems Prof. J.S. Colton © GIT 2009 21 #12;3D Printing Head (Soligen)3D Printing

  18. Industrial Engineering Industrial Advisory Board

    E-Print Network [OSTI]

    Gelfond, Michael

    Industrial Engineering Industrial Advisory Board (IAB) #12;PURPOSE: The Texas Tech University - Industrial Engineering Industrial Ad- visory Board (IAB) is an association of professionals with a com- mon goal - promoting and developing the Texas Tech Department of Industrial Engineering and its students

  19. Bio-Manufacturing: A Strategic clean energy manufacturing opportunity

    Broader source: Energy.gov [DOE]

    Breakout Session 1: New Developments and Hot Topics Session 1-A: Biomass and the U.S. Competitive Advantages for Manufacturing Clean Energy Products Libby Wayman, Director, EERE Clean Energy Manufacturing Initiative

  20. Policy on Student Employment Policy on Student Employment

    E-Print Network [OSTI]

    Sridhar, Srinivas

    Policy on Student Employment 09/01/2014 Policy on Student Employment I. Purpose and Scope Student employment is an important university resource as well as an opportunity for individual students to support Authority The Student Employment Office authorizes requests from units to post student-employee positions

  1. Additive Manufacturing for Fuel Cells

    Office of Energy Efficiency and Renewable Energy (EERE)

    Blake Marshall, AMO's lead for Additive Manufacturing Technologies, will provide an overview of current R&D activities in additive manufacturing and its application to fuel cell prototyping and...

  2. Climate VISION: Private Sector Initiatives: Automobile Manufacturers...

    Office of Scientific and Technical Information (OSTI)

    of Automobile Manufacturers The Alliance of Automobile Manufacturers, Inc. is a trade association composed of 10 car and light truck manufacturers with about 600,000...

  3. Precision and Energy Usage for Additive Manufacturing

    E-Print Network [OSTI]

    Clemon, Lee; Sudradjat, Anton; Jaquez, Maribel; Krishna, Aditya; Rammah, Marwan; Dornfeld, David

    2013-01-01T23:59:59.000Z

    Sustainability of additive manufacturing: measuring theCommittee F42 on Additive Manufacturing Technologies," TheASTM Committee F42 on Additive Manufacturing Technologies. -

  4. Precision and Energy Usage for Additive Manufacturing

    E-Print Network [OSTI]

    Clemon, Lee; Sudradjat, Anton; Jaquez, Maribel; Krishna, Aditya; Rammah, Marwan; Dornfeld, David

    2013-01-01T23:59:59.000Z

    Hague, "Sustainability of additive manufacturing: measuringASTM Committee F42 on Additive Manufacturing Technologies,"ASTM Committee F42 on Additive Manufacturing Technologies. -

  5. clean energy manufacturing | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clean Energy Manufacturing Initiative The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the DOE Office of Energy...

  6. ITP Nanomanufacturing: Nanomanufacturing Portfolio: Manufacturing...

    Energy Savers [EERE]

    ITP Nanomanufacturing: Nanomanufacturing Portfolio: Manufacturing Processes and Applications to Accelerate Commercial Use of Nanomaterials, January 2011 ITP Nanomanufacturing:...

  7. Energy efficient industrialized housing research program

    SciTech Connect (OSTI)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-12-01T23:59:59.000Z

    This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

  8. Uranium Industry Annual, 1992

    SciTech Connect (OSTI)

    Not Available

    1993-10-28T23:59:59.000Z

    The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

  9. Expanding the Pool of Federal Policy Options to Promote Industrial Energy Efficiency

    SciTech Connect (OSTI)

    Brown, Dr. Marilyn Ann [Georgia Institute of Technology] [Georgia Institute of Technology; Cox, Matthew [Georgia Institute of Technology] [Georgia Institute of Technology; Jackson, Roderick K [ORNL] [ORNL; Lapsa, Melissa Voss [ORNL] [ORNL

    2011-01-01T23:59:59.000Z

    Improving the energy efficiency of industry is essential for maintaining the viability of domestic manufacturing, especially in a world economy where production is shifting to low-cost, less regulated developing countries. Numerous studies have shown the potential for significant cost-effective energy-savings in U.S. industries, but the realization of this potential is hindered by regulatory, information, workforce, and financial obstacles. This report evaluates seven federal policy options aimed at improving the energy efficiency of industry, grounded in an understanding of industrial decision-making and the barriers to efficiency improvements. Detailed analysis employs the Georgia Institute of Technology's version of the National Energy Modeling System and spreadsheet calculations, generating a series of benefit/cost metrics spanning private and public costs and energy bill savings, as well as air pollution benefits and the social cost of carbon. Two of the policies would address regulatory hurdles (Output-Based Emissions Standards and a federal Energy Portfolio Standard with Combined Heat and Power); three would help to fill information gaps and workforce training needs (the Superior Energy Performance program, Implementation Support Services, and a Small Firm Energy Management program); and two would tackle financial barriers (Tax Lien Financing and Energy-Efficient Industrial Motor Rebates). The social benefit-cost ratios of these policies appear to be highly favorable based on a range of plausible assumptions. Each of the seven policy options has an appropriate federal role, broad applicability across industries, utilizes readily available technologies, and all are administratively feasible.

  10. EMPLOYMENT SUMMARY Lexington, VA 24450

    E-Print Network [OSTI]

    Marsh, David

    EMPLOYMENT SUMMARY Lexington, VA 24450 Website : http://www.wlu.edu Phone : 540-458-8400 WASHINGTON AND LEE UNIVERSITY - 2011 Sydney Lewis Hall Total graduates 123 Unemployed - seeking 2 Employment status unknown 5 Unemployed - not seeking 0 Employed 111 97 14 Pursuing graduate degree FT 5 EMPLOYMENT STATUS

  11. The Technical and Economic Potential for Electricity Energy Efficiency in a Semiconductor Manufacturing Plant

    E-Print Network [OSTI]

    Lee, A. H. W.; Golden, J. W.; Zarnikau, J. W.

    In recent years, there has been renewed interest in energy efficiency in the semiconductor industry. The declining prices for semiconductor products has prompted semiconductor manufacturing plants to control costs so as to maintain profitability...

  12. Energy Management Pathfinding: Understanding Manufacturers' Ability and Desire to Implement Energy Efficiency

    E-Print Network [OSTI]

    Russell, C.

    2005-01-01T23:59:59.000Z

    Manufacturers are scrambling for relief from today's energy expenses and price volatility. Most industry decision-makers believe the solution is to seek the lowest available energy prices. Too often, managers fail to grasp the opportunities offered...

  13. The Sixth Annual DOE Solid-State Lighting Manufacturing R&D Workshop

    Broader source: Energy.gov [DOE]

    About 140 industry leaders from across the country, representing every link in the supply chain—from chip makers, to luminaire manufacturers, to material and equipment suppliers, to packagers, to...

  14. Development of a manufacturing Applet's user interface to enhance its properties as a teaching tool

    E-Print Network [OSTI]

    Dobson, Michael, S.B. (Michael J.). Massachusetts Institute of Technology

    2011-01-01T23:59:59.000Z

    A manufacturing system's design and operation plays a critical part is the cost, rate and quality of any product. As a result optimization techniques and cost benefit analysis are common practices in any industry involving ...

  15. Developing a unified manufacturing and sourcing strategy in a multi-business unit engineering firm

    E-Print Network [OSTI]

    Abu-Khalil, Ramy, 1978-

    2005-01-01T23:59:59.000Z

    Competitive pressures in manufacturing industries have led to an increased utilization of outsourcing as a strategic alternative to vertical integration. This thesis develops a methodology to aid multi-business unit firms ...

  16. Fact Sheet: Advanced Natural Gas Systems Manufacturing R&D initiative

    Energy Savers [EERE]

    Fact Sheet: Advanced Natural Gas Systems Manufacturing R&D initiative 1 of 1 Summary: DOE will launch a collaborative effort with industry to evaluate and scope high- impact...

  17. 2014 Solid-State Lighting Manufacturing R&D Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Low-Cost Manufacturing of OLED Lighting John Hamer, OLEDWorks Large-Area Integrated Substrate for OLED Lighting Cheng-Hung Hung, PPG Industries Day 2 LED Lighting Global...

  18. Energy Management Pathfinding: Understanding Manufacturers' Ability and Desire to Implement Energy Efficiency 

    E-Print Network [OSTI]

    Russell, C.

    2005-01-01T23:59:59.000Z

    Manufacturers are scrambling for relief from today's energy expenses and price volatility. Most industry decision-makers believe the solution is to seek the lowest available energy prices. Too often, managers fail to grasp the opportunities offered...

  19. Energy efficient industrialized housing research program

    SciTech Connect (OSTI)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; Mc Donald, M.; McGinn, B.; Ryan, P.; Sekiguchi, T. (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Maxwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-01-01T23:59:59.000Z

    This is the second volume of a two volume report on energy efficient industrialized housing. Volume II contains support documentation for Volume I. The following items are included: individual trip reports; software bibliography; industry contacts in the US, Denmark, and Japan; Cost comparison of industrialized housing in the US and Denmark; draft of the final report on the systems analysis for Fleetwood Mobile Home Manufacturers. (SM)

  20. The Manufacturing Enterprise and Sustainable Development -A Working Paper

    E-Print Network [OSTI]

    Gutowski, Timothy

    1 The Manufacturing Enterprise and Sustainable Development - A Working Paper T.G. Gutowski Lab with industry...) and brought to the fore the concept of sustainable development. The report defined sustainable [WCED 1987]. Since then, the concept of Sustainable Development has become a common goal for many

  1. Firm racial segregation and affirmative action in the highway construction industry

    E-Print Network [OSTI]

    Marion, Justin

    2009-01-01T23:59:59.000Z

    on self- employment in the construction industry. Nationalaction in the highway construction industry Justin MarionI document that highway construction ?rms in California,

  2. NET-ZERO CARBON MANUFACTURING AT NET-ZERO COST Dustin Pohlman

    E-Print Network [OSTI]

    Kissock, Kelly

    1 NET-ZERO CARBON MANUFACTURING AT NET-ZERO COST Dustin Pohlman Industrial Assessment Center energy in manufacturing plants that results in net-zero carbon emissions at net-zero costs. The paper begins by reviewing the economics of net- zero energy buildings and discussing why a different approach

  3. Electrocoagulation: A Technology for Water Recycle and Wastewater Treatment in Semiconductor Manufacturing

    E-Print Network [OSTI]

    Fay, Noah

    Manufacturing Devin Whipple James C. Baygents & James Farrell, Associate Professors Department of Chemical of treating wastewater streams in the semiconductor manufacturing industry. Electrocoagulation involves in particular has the possibility of immediate application at one of Intel's plants. In addition, these both

  4. Economic Contributions of Florida's Agricultural, Natural Resource, Food and Kindred Product Manufacturing and

    E-Print Network [OSTI]

    Florida, University of

    Manufacturing and Distribution, and Service Industries in 20081 Alan W. Hodges and Mohammad Rahmani2 1 economic sectors for food and kindred product manufacturing, wholesale and retail distribution, input supplies, support services, and nature-based recreation/eco-tourism. In addition to farming, forestry

  5. Economic Contributions of Florida Agriculture, Natural Resources, Food and Kindred Product Manufacturing

    E-Print Network [OSTI]

    Florida, University of

    Manufacturing and Distribution, and Service Industries in 20061 Alan W. Hodges, Mohammad Rahmani, and W. David range of other economic sectors for food and kindred products manufacturing, wholesale and retail distribution, input suppliers, support services, and nature-based recreation. In addition to farms, forests

  6. NREL's emulation tool helps manufacturers ensure the safety and reliability of electric vehicle batteries.

    E-Print Network [OSTI]

    NREL's emulation tool helps manufacturers ensure the safety and reliability of electric vehicle internal short, the device is small compared to other shorting tools being developed by industry and does tool for battery manufacturers and other national laboratories as well as original equipment

  7. A Screening Model to Explore Planning Decisions in Automotive Manufacturing Systems under Demand Uncertainty

    E-Print Network [OSTI]

    de Weck, Olivier L.

    In White assembly systems in the automotive industry by applying the developed screening model. It shows3 A Screening Model to Explore Planning Decisions in Automotive Manufacturing Systems under Demand engineering systems, as for automotive manufacturing, often require significant capital investment

  8. WPMT (Fall 2009) Page 1 June 8, 2009 Wood Products Manufacturing Technology

    E-Print Network [OSTI]

    positions in wood products manufacturing, particularly for the hardwood cabinet and furniture industries to Lean Manufacturing (3) MET 14100 Materials I (4) Physics elective3 (3) STAT 30100 Elementary Sixth Semester (3) ECON 21000 Principles of Economics (3) FNR 31100 Wood Structure, Identification

  9. Improving Process Heating System Performance: A Sourcebook for Industry, Second Edition

    SciTech Connect (OSTI)

    Not Available

    2008-02-01T23:59:59.000Z

    This is one in a series of sourcebooks to help manufacturers optimize their industrial systems; this particular sourcebook addresses process heating systems.

  10. Evaluating the income and employment impacts of gas cooling technologies

    SciTech Connect (OSTI)

    Hughes, P.J. [Oak Ridge National Lab., TN (United States); Laitner, S.

    1995-03-01T23:59:59.000Z

    The purpose of this study is to estimate the potential employment and income benefits of the emerging market for gas cooling products. The emphasis here is on exports because that is the major opportunity for the U.S. heating, ventilating, and air-conditioning (HVAC) industry. But domestic markets are also important and considered here because without a significant domestic market, it is unlikely that the plant investments, jobs, and income associated with gas cooling exports would be retained within the United States. The prospects for significant gas cooling exports appear promising for a variety of reasons. There is an expanding need for cooling in the developing world, natural gas is widely available, electric infrastructures are over-stressed in many areas, and the cost of building new gas infrastructure is modest compared to the cost of new electric infrastructure. Global gas cooling competition is currently limited, with Japanese and U.S. companies, and their foreign business partners, the only product sources. U.S. manufacturers of HVAC products are well positioned to compete globally, and are already one of the faster growing goods-exporting sectors of the U.S. economy. Net HVAC exports grew by over 800 percent from 1987 to 1992 and currently exceed $2.6 billion annually (ARI 1994). Net gas cooling job and income creation are estimated using an economic input-output model to compare a reference case to a gas cooling scenario. The reference case reflects current policies, practices, and trends with respect to conventional electric cooling technologies. The gas cooling scenario examines the impact of accelerated use of natural gas cooling technologies here and abroad.

  11. Seminar Title: Additive Manufacturing Advanced Manufacturing of Polymer and Composite Components

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Seminar Title: Additive Manufacturing ­ Advanced Manufacturing of Polymer and Composite Components Manufacturing ­ Advanced Manufacturing of Polymer and Composite Components Additive manufacturing technologies Functionally Integrated Composite Structures, Augsburg, Germany ME Faculty Candidate Abstract: Additive

  12. Posted 10/18/11 MANUFACTURING ENGINEER

    E-Print Network [OSTI]

    Heller, Barbara

    manufacturing processes in our Metal Fabrication and Assembly departments. Additional responsibilities includePosted 10/18/11 MANUFACTURING ENGINEER Kenall Manufacturing Gurnee, IL Kenall, a leading manufacturer of advanced lighting solutions for specialized environments, has exceptional opportunities

  13. Faculty Position in Mechanical Engineering Additive Manufacturing

    E-Print Network [OSTI]

    Faculty Position in Mechanical Engineering Additive Manufacturing University of Kansas of additive manufacturing. Exceptional candidates with outstanding qualifications could be considered using additive manufacturing in applications such as, but not limited to the net shape manufacture of

  14. Coal Industry Annual 1995

    SciTech Connect (OSTI)

    NONE

    1996-10-01T23:59:59.000Z

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

  15. Coal industry annual 1996

    SciTech Connect (OSTI)

    NONE

    1997-11-01T23:59:59.000Z

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

  16. Uranium industry annual 1995

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

  17. Clean Energy Manufacturing Initiative Midwest Regional Summit...

    Office of Environmental Management (EM)

    Clean Energy Manufacturing Initiative Midwest Regional Summit: Lightweighting Breakout Session Summary Clean Energy Manufacturing Initiative Midwest Regional Summit: Lightweighting...

  18. U.S. uranium production industry employment, 1993-2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin TransitionProgram | Department Home >Area:DepartmentSecurity

  19. Trajectory Description Conception for Industrial Robots. Sergey Alatartsev

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Trajectory Description Conception for Industrial Robots. Sergey Alatartsev Computer Systems for industrial robots programming. It should allow them to obtain difficult motions by easy com- bination of modern manufactur- ing process. At the present moment industrial robots do not meet these demands

  20. Manufacturing Demonstration Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron 9Novemberutilities and aHistoricMannManufacturing

  1. PLACEMENT--ALL MAJORS EMPLOYMENT........................................................................................................ 57%

    E-Print Network [OSTI]

    Napier, Terrence

    PLACEMENT--ALL MAJORS EMPLOYMENT......................................................................................................... 4% PLACEMENT--ARTS AND SCIENCES EMPLOYMENT......................................................................................................... 4% PLACEMENT--BUSINESS AND ECONOMICS EMPLOYMENT

  2. placement--all majors Employment .......................................................................................................... 63%

    E-Print Network [OSTI]

    Napier, Terrence

    placement--all majors Employment.............................................................................................................. 3% placement--arts and sciences Employment.............................................................................................................. 3% placement--business and economics Employment

  3. PLACEMENT--ALL MAJORS EMPLOYMENT........................................................................................................ 66%

    E-Print Network [OSTI]

    Napier, Terrence

    PLACEMENT--ALL MAJORS EMPLOYMENT......................................................................................................... 2% PLACEMENT--ARTS AND SCIENCES EMPLOYMENT......................................................................................................... 2% PLACEMENT--BUSINESS AND ECONOMICS EMPLOYMENT

  4. Industrial Engineering Roles In Industry

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    , be they processes, products or systems · Typical focus areas include: ­ Project Management ­ Manufacturing ­ Quality Measurement and Improvement ­ Program Management ­ Ergonomics/Human Factors ­ Technology, Production and Distribution ­ Supply Chain Management ­ Productivity, Methods and Process Engineering

  5. Postdoc Employment Opportunities at LANL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Employment at LANL Postdoc Employment Opportunities at LANL Point your career towards LANL: work with the best minds on the planet in an inclusive environment that is rich in...

  6. SEPARATION FROM EMPLOYMENT RESIGNATION & RETIREMENT

    E-Print Network [OSTI]

    Su, Xiao

    payment of wages. Faculty members participating in the Faculty Early Retirement Program (FERPSEPARATION FROM EMPLOYMENT RESIGNATION & RETIREMENT HUMAN RESOURCES POLICY Human Resources | One SUBJECT: SEPARATION FROM EMPLOYMENT - RESIGNATION & RETIREMENT DATE: March 2007 I. PURPOSE / DESCRIPTION

  7. Impact of product design choices on supply chain performance in the notebook computer industry

    E-Print Network [OSTI]

    Sailer, Chad (Chad Darren)

    2010-01-01T23:59:59.000Z

    Intel Corporation is the world's leading manufacturer of processors for personal computers. As the company strives to maintain its leadership position in this industry, it identifies significant trends in the industry and ...

  8. Rethinking the industrial landscape : the future of the Ford Rouge complex

    E-Print Network [OSTI]

    Bodurow Rea, Constance Corinne

    1991-01-01T23:59:59.000Z

    The growth and decline of manufacturing industries in the past century and the industrial landscape that this activity has produced has had profound physical, environmental, social and economic impact on the communities ...

  9. Product strategy in response to technological innovation in the semiconductor test industry

    E-Print Network [OSTI]

    Lin, Robert W. (Robert Wei-Pang), 1976-

    2004-01-01T23:59:59.000Z

    After the market boom of 2000 in the semiconductor industry changed significantly. The changes included stricter limits on capital cost spending, and the increased propensity of the industry to outsource the manufacturing ...

  10. Virginia Tech Grado Department of Industrial & Systems Engineering Three (3) ISE Faculty Position Announcements

    E-Print Network [OSTI]

    Buehrer, R. Michael

    , industrial engineering, or a closely-related discipline. Emerging Frontiers of Industrial Engineering-data analytics, cybersecurity, bio-manufacturing, and renewable energy. The appointment is at the assistant

  11. Document: Outside Employment/ Consulting Form

    E-Print Network [OSTI]

    Quigg, Chris

    Document: Outside Employment/ Consulting Form Document #: SO-2 Issue date: 8/21/09 Revision #: 3 on the WDRS website. OUTSIDE EMPLOYMENT/CONSULTING Fermilab employees are entitled to the same rights and privileges with respect to outside employment as other citizens. Therefore, there is no general prohibition

  12. EMPLOYMENT OVERVIEW HARVARD KENNEDY SCHOOL

    E-Print Network [OSTI]

    EMPLOYMENT OVERVIEW HARVARD KENNEDY SCHOOL CAREER ADVANCEMENT 617-495-1161t career_advancement@hks.harvard.edut www.hks.harvard.edu/careert Class of 2013 HARVARD KENNEDY SCHOOL CLASS OF 2013 EMPLOYMENT OVERVIEWt Office of Career Advancement (oca) employed a variety of data collection techniques including an exit

  13. Department Guide to STUDENT EMPLOYMENT

    E-Print Network [OSTI]

    Zobin, Nahum

    1 Department Guide to STUDENT EMPLOYMENT @ The College Of William & Mary "A World of Possibilities" 2 Overview of Student Employment Procedures for Supervisors The following information is an overview of the student employment process for supervisors at The College of William & Mary. The Financial Aid Office

  14. Appendix 14-Ia Coach's Employment

    E-Print Network [OSTI]

    Swaddle, John

    Appendix 14-Ia Coach's Employment Non Institutional Camp/Clinic Revised August 2010 ATHLETICS STAFF MEMBERS' EMPLOYMENT AT A NON-WILLIAM & MARY CAMP/CLINIC Coach's Name: ______ Sport) No athletics department staff member may be employed (salary or volunteer) in any capacity by a camp or clinic

  15. APPLICATION FOR EMPLOYMENT FACULTY POSITIONS

    E-Print Network [OSTI]

    Bennett, Gisele

    APPLICATION FOR EMPLOYMENT FACULTY POSITIONS GEORGIA INSTITUTE OF TECHNOLOGY Atlanta, Georgia 30332-0435 A Unit of the University System of Georgia An Equal Education and Employment Opportunity Institution sought ( ) Full-time ( ) Part-time How did you learn of employment opportunities at Georgia Tech? List

  16. The Photovoltaic Manufacturing Technology Project: Phase 1 subcontractors

    SciTech Connect (OSTI)

    Not Available

    1992-07-01T23:59:59.000Z

    The Phase I portion of the Photovoltaic Manufacturing Technology (PVMaT) Project, the problem identification phase, was completed in mid-1991. This work involved competitive bidding that was open to any US firm with existing manufacturing capabilities, regardless of material or module design. In early 1991, subcontracts were awarded to 22 of approximately 40 bidders. Each subcontract was funded at a level of up to $50,000 and a duration of three months. The problems identified by the research in this phase of the program represent opportunities for industrial participants to improve their manufacturing processes, reduce manufacturing costs, increase product performance, or develop a foundation for scaling up US-based manufacturing plant capacities. Many of these opportunities have since been detailed in the approaches that these organizations suggested for Phase 2 (the problem solution phase) research and development (R&D). It is not. anticipated that any additional Phase I solicitation will be issued because Phase I was intended to help the US Department of Energy (DOE) characterize the status and needs of the US photovoltaic (PV) industry and encourage the industry to examine and prioritize required manufacturing line improvements. Phase I subcontracted research included five subcontractors working on flat-plate crystalline silicon technology, eleven working on flat-plate thin-film modules (one in thin-film crystalline silicon, six in amorphous silicon. and four in polycrystalline thin films), six working on concentrator systems, and two working on general equipment/production options. (Two of the participants each worked in two areas).

  17. The Photovoltaic Manufacturing Technology Project: Phase 1 subcontractors

    SciTech Connect (OSTI)

    Not Available

    1992-07-01T23:59:59.000Z

    The Phase I portion of the Photovoltaic Manufacturing Technology (PVMaT) Project, the problem identification phase, was completed in mid-1991. This work involved competitive bidding that was open to any US firm with existing manufacturing capabilities, regardless of material or module design. In early 1991, subcontracts were awarded to 22 of approximately 40 bidders. Each subcontract was funded at a level of up to $50,000 and a duration of three months. The problems identified by the research in this phase of the program represent opportunities for industrial participants to improve their manufacturing processes, reduce manufacturing costs, increase product performance, or develop a foundation for scaling up US-based manufacturing plant capacities. Many of these opportunities have since been detailed in the approaches that these organizations suggested for Phase 2 (the problem solution phase) research and development (R D). It is not. anticipated that any additional Phase I solicitation will be issued because Phase I was intended to help the US Department of Energy (DOE) characterize the status and needs of the US photovoltaic (PV) industry and encourage the industry to examine and prioritize required manufacturing line improvements. Phase I subcontracted research included five subcontractors working on flat-plate crystalline silicon technology, eleven working on flat-plate thin-film modules (one in thin-film crystalline silicon, six in amorphous silicon. and four in polycrystalline thin films), six working on concentrator systems, and two working on general equipment/production options. (Two of the participants each worked in two areas).

  18. Sandia National Laboratories: wind manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at the Wind Energy Manufacturing Laboratory-a joint effort of researchers from TPI Composites, a Scottsdale, Arizona-based company that operates a turbine blade factory in...

  19. Manufacturing Spotlight: Boosting American Competitiveness

    Office of Energy Efficiency and Renewable Energy (EERE)

    Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient.

  20. Manufacturing Demonstration Facility Workshop Videos

    Broader source: Energy.gov [DOE]

    Session recordings from the Manufacturing Demonstration Facility Workshop held in Chicago, Illinois, on March 12, 2012, and simultaneously broadcast as a webinar.

  1. Wireless technology for integrated manufacturing

    SciTech Connect (OSTI)

    Manges, W.W.; Allgood, G.O.; Shourbaji, A.A.

    1996-08-01T23:59:59.000Z

    This paper describes the ground breaking work in Oak Ridge facilities that now leads us to the brink of the wireless revolution in manufacturing. The focus is on solving tough technological problems necessary for success and addressing the critical issues of throughput, security, reliability, and robustness in applying wireless technology to manufacturing processes. Innovative solutions to these problems are highlighted through detailed designs and testbed implementations that demonstrate key concepts. The DOE-Oak Ridge complex represented by the Oak Ridge Centers for Manufacturing Technologies (ORCMT) continues to develop these technologies and will continue to focus on solving tough manufacturing problems.

  2. Expanding the Industrial Assessment Center Program: Building an Industrial Efficiency Workforce

    E-Print Network [OSTI]

    Trombley, D.; Elliott, R. N.; Chittum, A.

    Expanding the Industrial Assessment Center Program: Building an Industrial Efficiency Workforce Daniel Trombley Engineering Associate R. Neal Elliott, Ph.D., P.E. Associate Director of Research American Council for an Energy-Efficient... of access to technical information and trained workforce. One of the most successful programs for achieving energy efficiency savings in the manufacturing sector is the US Department of Energy (DOE)'s Industrial Assessment Center (IAC) program...

  3. Strategies to improve energy efficiency in semiconductor manufacturing

    SciTech Connect (OSTI)

    Robertson, C.; Stein, J; Harris, J.; Cherniack, M.

    1997-07-01T23:59:59.000Z

    The global semiconductor industry is growing at an astounding rate. In the next few years, the industry is expected to invest some $169 billion to build more than 36 million square feet of clean room floor space. Electric loads in these new plants are expected to total more than 5,000 MW and 40,000 GWH per year. This paper summarizes the results of studies to identify opportunities for improved energy efficiency in the semiconductor industry. The genesis of this work came about as the authors observed the rapid growth of the semiconductor industry in the Pacific Northwest. Industry observers report that some $20 billion in new facilities could be build in the Northwest in the nest few years, with a combined electric load in excess of 500 to 600 MW. The research results reported in this paper have been supported in part by the Bonneville Power Administration, the Northwest Power Planning Council, the Oregon Office of Energy, New England Electric System and the Conservation Law Foundation of New England. With their support the authors interviewed numerous industry participants, reviewed key literature, and met extensively with industry engineering firms. manufacturers, vendors and suppliers of manufacturing equipment and materials, and others with interests in this industry. Significant opportunities to improve energy efficiency in the semiconductor industry have been reported to us; perhaps 50 percent or greater aggregate improvement appears possible. Equally significant market barriers constrain the industry from achieving these savings. Yet, because of his industry's concentration, competitiveness, and existing research consortia such as SEMATECH, the authors believe the substantial market barriers to energy efficiency can be addressed with carefully formulated strategies to demonstrate, document and communicate the business and technical case for advanced energy efficiency, including potential benefits in finance, manufacturing and corporate environmental performance. This paper describes how the industry plans research and development investments, examines energy use intensities, summarizes key market barriers which constrain energy efficient design, identifies interests in the industry that may be changing energy efficiency perceptions, lists activities to move energy efficiency to a higher priority, gives examples of energy efficiency opportunities, and reviews activities planned by a coalition of Northwest interests to accelerate the adoption of energy efficient design strategies.

  4. An analysis of buildings-related energy use in manufacturing

    SciTech Connect (OSTI)

    Niefer, M.J.; Ashton, W.B.

    1997-04-01T23:59:59.000Z

    This report presents research by the Pacific Northwest National Laboratory (PNNL) to develop improved estimates of buildings-related energy use in US manufacturing facilities. The research was supported by the Office of Building Technology, State and Community Programs (BTS), Office of Energy Efficiency and Renewable Energy (EERE), US Department of Energy (DOE). The research scope includes only space conditioning and lighting end uses. In addition, this study also estimates the energy savings potential for application of selected commercial buildings technologies being developed by the BTS office to manufacturing and other industrial process facilities. 17 refs., 2 figs., 19 tabs.

  5. Cost and Energy Consumption Optimization of Product Manufacture in a Flexible Manufacturing System

    E-Print Network [OSTI]

    Diaz, Nancy; Dornfeld, David

    2012-01-01T23:59:59.000Z

    Product Manufacture in a Flexible Manufacturing System Nancypart production under flexible process routings is studiedMachining; Cost; Energy; Flexible Manufacturing INTRODUCTION

  6. A collaborative research venture between the minerals industry and

    E-Print Network [OSTI]

    Michelson, David G.

    A collaborative research venture between the minerals industry and The University of British Columbia MDRUMINERAL DEPOSIT RESEARCH UNIT To increase the understanding of mineral deposits and highly trained geologists for employment in the minerals industry. Mission Vision MDRU

  7. A Low Cost Energy Management Program at Engelhard Industries Division 

    E-Print Network [OSTI]

    Brown, T. S.; Michalek, R.; Reiter, S.

    1982-01-01T23:59:59.000Z

    in technology related to precious metals and nonmetallic minerals. It manufactures high-performance chemical and precious metals products, including catalysts for the petroleum and automotive industries. Engelhard's energy costs have risen dramatically over...

  8. ITP Industrial Distributed Energy: Assessment of Large Combined...

    Broader source: Energy.gov (indexed) [DOE]

    Instruments & Related Prods 4 0 1 5 4 39 Misc. Manufacturing Industries 2 1 0 2 2 51 Wholesale Trade -Nondurable Goods 0 0 0 1 1 52 Bldg Materials, Hardware, Garden Sup. 0 0 0 2 0...

  9. A Low Cost Energy Management Program at Engelhard Industries Division

    E-Print Network [OSTI]

    Brown, T. S.; Michalek, R.; Reiter, S.

    1982-01-01T23:59:59.000Z

    in technology related to precious metals and nonmetallic minerals. It manufactures high-performance chemical and precious metals products, including catalysts for the petroleum and automotive industries. Engelhard's energy costs have risen dramatically over...

  10. Utilizing Industrial Engineers to Implement "Lean Enterprise" at Company A

    E-Print Network [OSTI]

    Stein, Jean D'Ann

    2012-12-14T23:59:59.000Z

    in the implementation of continuous improvement and lean thinking. This skillset has recently allowed IEs to work outside their normal realm of manufacturing, and focus on areas more closely related to service organizations. At Company A, Industrial Engineers...

  11. Energy Management in a Multi-Industry Organization

    E-Print Network [OSTI]

    Lawrence, J.

    1981-01-01T23:59:59.000Z

    Tenneco operates in seven of the nation's ten most energy intensive industries: Petroleum Refining, Chemicals Manufacturing, Pulp and Paper, Transportation Equipment, Primary Metals, Food Processing, and Machinery. This diversification...

  12. An Overview of the Louisiana Primary Solid Wood Products Industry

    E-Print Network [OSTI]

    goal of this second study is to profile the primary solid wood products industry. In addition (including pulp and paper) and secondary manufacturing establishments (Jacob et al. 1987). The forest

  13. Energy Responsibility Accounting - An Energy Conservation Tool for Industrial Facilities

    E-Print Network [OSTI]

    Kelly, R. L.

    1980-01-01T23:59:59.000Z

    As energy costs continue to rise faster than the rate of inflation, industrial energy management becomes a more important issue in the control of manufacturing costs. Energy Responsibility Accounting (ERA) is a tool which improves management...

  14. Implications of two-sided advertising in the automotive industry

    E-Print Network [OSTI]

    Luke, Jeffrey O. (Jeffrey Oliver), 1967-

    2004-01-01T23:59:59.000Z

    The extreme competition in the automotive industry results in razor-thin profit margins as original equipment manufacturers (OEMs) compete for market share and profits which increase shareholder value. Product differentiation ...

  15. Energy Conservation and Waste Reduction in the Metal Fabrication Industry

    E-Print Network [OSTI]

    Kirk, M. C. Jr.; Looby, G. P.

    Reductions of energy use and waste generation can help manufacturers to be more profitable and more environmentally acceptable. Industrial Assessment Centers located at universities throughout the United States, funded by the U.S. Department...

  16. An Analysis of Two Industrial Assessment Center Extended Assessments

    E-Print Network [OSTI]

    Farouz, H. E.; Gafford, G. D.; Eggebrecht, J. A.; Heffington, W. M.

    The Industrial Assessment Center at Texas A&M University extended assessments by spending about two extra days at each of three manufacturing plants. The extended assessments are characterized by use of sophisticated electronic monitoring equipment...

  17. Leveraging downstream data in the footwear/apparel industry

    E-Print Network [OSTI]

    Axline, Jeffrey Edward

    2007-01-01T23:59:59.000Z

    Retailers collect information regarding consumer purchases on a transactional basis. This data is not completely being leveraged by manufacturers in the footwear and apparel industry to increase on-shelf availability. ...

  18. Waste Heat Recovery in the Metal Working Industry

    E-Print Network [OSTI]

    McMann, F. C.; Thurman, J.

    1983-01-01T23:59:59.000Z

    WASTE HEAT RECOVERY IN THE METAL WORKING INDUSTRY Fred C. McMann Jimmy Thurman North American Manufacturing Co. Combustion Services Company Woodlands, Texas Houston, Texas The use of exhaust gas heat exchangers to preheat combustion air...

  19. Electrotechnologies and Industrial Pollution Control 

    E-Print Network [OSTI]

    Schmidt, P. S.

    1990-01-01T23:59:59.000Z

    content, and nonferrfms industrial efficiency and productivity has been cited in reverb melting furnaces produce high percentage~ of a number of publications [1-4]; these benefits continue metal oxides. These pollutants are greatly reduced in to drive... or in furnaces are capable of heat treating metals in vacu~m, development and which could be of value to low oxygen, or inert atmospheres, and operate witH no manufacturers in meeting productivity and exhaust gases. Thus, metal oxide formationl...

  20. Building a More Competitive American Manufacturing Industry with...

    Office of Environmental Management (EM)

    to 60 in under five seconds. Concept to reality in just six weeks. Photo Gallery: 3D Printing Brings Classic Shelby Cobra to Life Building a More Competitive American...

  1. Green manufacturing in the medical device industry : a case study

    E-Print Network [OSTI]

    Gautreau, Leigh (Leigh Ann)

    2009-01-01T23:59:59.000Z

    Introduction: Med Dev (name changed to protect confidentiality), is a medical device start-up using tissue engineering and drug delivery techniques to help combat the negative effects associated with secondary injury. Med ...

  2. Colorado State University Industrial Assessment Center Saves Manufacturers

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1. FeedstockCLEANSprings Gets an Energy-SavingMoney and

  3. Manufacturers and Utilities to Accelerate Industry Uptake of...

    Energy Savers [EERE]

    maximize competitive advantage." SEP is a certification program that builds on the ISO 50001 energy management standard to verify energy performance improvements and savings...

  4. I. MOTIVATION The vehicle manufacturing industry plans to integrate

    E-Print Network [OSTI]

    Weske, Mathias

    , and privacy concepts. The results have been evaluated and proofed mainly by simulations. Specific simulation environment for a realistic simulation of Vehicle-2- X Communication scenarios. Based on this requirement on hardware requirements, security, communication, and routing protocols; and on application, trust

  5. Colorado State University Industrial Assessment Center Saves Manufacturers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuildingCoal Combustion Products CoalEnergy ÂťrepresentingMoney and

  6. Building a More Competitive American Manufacturing Industry with Advanced

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you want toworldPower 2010 1AAcquisition »

  7. Smart Manufacturing Institute Industry Day Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment of Energy Ready,Smart Grid RFIGrid: Enabler of the NewSmart

  8. QTR Webinar: Chapter 8 - Industry and Manufacturing | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSAR - TProcuring SolarNo. 195 -Pueblo de

  9. PEM Stack Manufacturing: Industry Status | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOilNEWResponse toOctoberMultifamily Landlords1Reality | 2.PBA2007PBS:PEM

  10. Federal and Industry Partners Issue Challenge to Manufacturers | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy June 6-7, 2013 Meeting Federal RegisterCoal1 ReportMEETING MAYof

  11. Clean Energy Manufacturing Initiative Industrial Efficiency and Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t z CPlasma0Yellowstone-TetonClean Energy

  12. Manufacturers and Utilities to Accelerate Industry Uptake of Superior

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil & Gas »ofMarketingSmart WindowsDepartment of

  13. Center for Sustainable Industry and Manufacturing | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t z C oCNMSStaff Highlight Nina BalkeSummerWhat's

  14. Federal and Industry Partners Issue Challenge to Manufacturers | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube|6721Energy 3_adv_battery.pdf MoreEnergyAugust 19,CoalDepartmentUtilityof

  15. Industrial Activities at DOE: Efficiency, Manufacturing, Process, and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking of BlytheDepartment of EnergyTreatment andJune 25, 2012Materials R&D

  16. Manufacturing-Industrial Energy Consumption Survey(MECS) Historical

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade EnergyTennesseeYearUnderground Storage1 Energy

  17. Building a More Competitive American Manufacturing Industry with Advanced

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding Removal Ongoing at DOE's Paducah SiteEnergy 5Building

  18. Smart Manufacturing Institute Industry Day Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretary ofSmall BusinessSecondarySmartthe

  19. QTR Webinar: Chapter 8 - Industry and Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of ContaminationHubs+ ReportEnergyProvidingPumpkinDistribution |ResiliencyQTR

  20. S C I E N C E Industrial Internship Program

    E-Print Network [OSTI]

    Machel, Hans

    S C I E N C E Faculty of Industrial Internship Program An Introduction for Students and Employers in the Industrial Internship program (IIP) to get a feel for life in industry. My previous experience was academia, Syncrude Research Department, Edmonton, AB #12;Prospective Students What is the Industrial Internship

  1. Petrick Technology Trends Of Manufacturing

    E-Print Network [OSTI]

    #12;323 Petrick Technology Trends chapter 9 The Future Of Manufacturing Irene Petrick Technology Trends This chapter is a story about the future of manufacturing based on three predictions: · that firms sophisticated modeling and simulation of both new products and production processes; · that additive

  2. PPG Industries Develops a Low-Cost Integrated OLED Substrate

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, PPG Industries, Inc., has developed a low-cost OLED substrate, using inexpensive soda-lime "float" glass that the company manufactures at high volume for the architectural industry. Float glass is thin sheet glass and is much less expensive than the borosilicate or double-side-polished display glass that's currently being used as substrates by OLED device manufacturers.

  3. Facts controllers and HVDC enhance power transmission (A manufacturer`s perspective)

    SciTech Connect (OSTI)

    Juette, G. [Siemens Energy & Automation, Atlanta, GA (United States); Renz, K. [Siemens AG, Erlangen (Germany)

    1995-12-31T23:59:59.000Z

    Various types of FACTS as well as HVDC have been available for some time. New ones have been developed recently. Their respective benefits are well proven and have been made known. System studies have to be done to make full use of FACTS and HVDC problem solving capabilities. Siemens is offering digital models for correct representation of several FACTS devices and HVDC in widely used time-based simulation study programs. The manufacturers are doing their homework. It is up to the utility industry to make use of it now!

  4. Out of Bounds Additive Manufacturing Christopher

    E-Print Network [OSTI]

    Pennycook, Steve

    #12;Out of Bounds Additive Manufacturing Christopher Holshouser, Clint Newell, and Sid Palas, Tenn. The Big Area Additive Manufacturing system has the potential to manufacture parts completely) are working on an additive manufacturing (AM) system (Big Area Additive Manufacturing, or BAAM) capable

  5. Model-Based Engineering and Manufacturing CAD/CAM Benchmark.

    SciTech Connect (OSTI)

    Domm, T.C.; Underwood, R.S.

    1999-10-13T23:59:59.000Z

    The Benchmark Project was created from a desire to identify best practices and improve the overall efficiency and performance of the Y-12 Plant's systems and personnel supporting the manufacturing mission. The mission of the benchmark team was to search out industry leaders in manufacturing and evaluate their engineering practices and processes to determine direction and focus for Y-12 modernization efforts. The companies visited included several large established companies and a new, small, high-tech machining firm. As a result of this effort, changes are recommended that will enable Y-12 to become a more modern, responsive, cost-effective manufacturing facility capable of supporting the needs of the Nuclear Weapons Complex (NWC) into the 21st century. The benchmark team identified key areas of interest, both focused and general. The focus areas included Human Resources, Information Management, Manufacturing Software Tools, and Standards/Policies and Practices. Areas of general interest included Infrastructure, Computer Platforms and Networking, and Organizational Structure. The results of this benchmark showed that all companies are moving in the direction of model-based engineering and manufacturing. There was evidence that many companies are trying to grasp how to manage current and legacy data. In terms of engineering design software tools, the companies contacted were somewhere between 3-D solid modeling and surfaced wire-frame models. The manufacturing computer tools were varied, with most companies using more than one software product to generate machining data and none currently performing model-based manufacturing (MBM) from a common model. The majority of companies were closer to identifying or using a single computer-aided design (CAD) system than a single computer-aided manufacturing (CAM) system. The Internet was a technology that all companies were looking to either transport information more easily throughout the corporation or as a conduit for business, as the small firm was doing successfully.

  6. PERFORMANCE ANALYSIS OF INDUSTRIAL ETHERNET NETWORKS BY MEANS OF TIMED MODEL-CHECKING

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    technologies in manufacturing automation but they have not been specifically intended for industrial controlPERFORMANCE ANALYSIS OF INDUSTRIAL ETHERNET NETWORKS BY MEANS OF TIMED MODEL-CHECKING Daniel Witsch networks are promising for the harmonization of the communication technologies in manufacturing automation

  7. Cross-Sector Impact Analysis of Industrial Efficiency Measures

    SciTech Connect (OSTI)

    Morrow, William [Lawrence Berkeley National Laboratory (LBNL)] [Lawrence Berkeley National Laboratory (LBNL); CreskoEngineering, Joe [Oak Ridge Institute for Science and Education (ORISE); Carpenter, Alberta [National Renewable Energy Laboratory (NREL)] [National Renewable Energy Laboratory (NREL); Masanet, Eric [Northwestern University, Evanston] [Northwestern University, Evanston; Nimbalkar, Sachin U [ORNL] [ORNL; Shehabi, Arman [Lawrence Berkeley National Laboratory (LBNL)] [Lawrence Berkeley National Laboratory (LBNL)

    2013-01-01T23:59:59.000Z

    The industrial or manufacturing sector is a foundational component to all economic activity. In addition to being a large direct consumer of energy, the manufacturing sector also produces materials, products, and technologies that influence the energy use of other economic sectors. For example, the manufacturing of a lighter-weight vehicle component affects the energy required to ship that component as well as the fuel efficiency of the assembled vehicle. Many energy efficiency opportunities exist to improve manufacturing energy consumption, however comparisons of manufacturing sector energy efficiency investment opportunities tend to exclude any impacts that occur once the product leaves the factory. Expanding the scope of analysis to include energy impacts across different stages of product life-cycle can highlight less obvious opportunities and inform actions that create the greatest economy-wide benefits. We present a methodology and associated analysis tool (LIGHTEnUP Lifecycle Industry GHgas, Technology and Energy through the Use Phase) that aims to capture both the manufacturing sector energy consumption and product life-cycle energy consumption implications of manufacturing innovation measures. The tool architecture incorporates U.S. national energy use data associated with manufacturing, building operations, and transportation. Inputs for technology assessment, both direct energy saving to the manufacturing sector, and indirect energy impacts to additional sectors are estimated through extensive literature review and engineering methods. The result is a transparent and uniform system of comparing manufacturing and use-phase impacts of technologies.

  8. Economic and technological advantages of using high speed sintering as a rapid manufacturing alternative in footwear applications

    E-Print Network [OSTI]

    Vasquez, Mike (George Mike)

    2009-01-01T23:59:59.000Z

    Rapid manufacturing is a family of technologies that employ additive layer deposition techniques to construct parts from computer based design models.[2] These parts can then be used as prototypes or finished goods. One ...

  9. Conditions of Employment Modern Apprentice

    E-Print Network [OSTI]

    Strathclyde, University of

    Conditions of Employment Modern Apprentice 1. GENERAL CONDITIONS Members of staff are subject. Modern Apprentices are required under this agreement to undertake training, attend courses and carry out

  10. Energy Efficient Industrialized Housing Research Program

    SciTech Connect (OSTI)

    Not Available

    1992-03-01T23:59:59.000Z

    Six area reported progress in the Energy Efficient Industrialized Housing Research Program during FY 1991. As part of Industry Guidance, meetings were held with steering and technical committees in computers, housing design and manufacturing. This task area enables the program to benefit from the expertise of industry representatives and communicate research results directly to them. As part of the Design Process performance specifications were being developed for the future housing system designed last year. These house designs coordinate and optimize predicted and desirable advances in computerized design processes, materials, components, and manufacturing automation to achieve energy efficiency at reduced first cost. Energy design software were being developed for CAD systems, stressed skin insulating core panel manufacturers; and a prototype energy sales tool. A prototype design was to be developed to integrate one or more subsystems with the building skin. As part of the Manufacturing Process we are developing a manufacturing process simulation and data base to help current and new entrants to the industrialized housing industry in assessing the impact of implementing new manufacturing techniques. For Evaluation we are developing testing plans for six units of housing on the UO campus and the stressed skin insulating core house to be constructed in Oregon. The DOW Chemical test structure will be retrofitted with a tile roof and retested to compare to the dome and conventional construction structures. Calibration of the wind tunnel will be completed so that laboratory tests can be conducted to simulate the ventilation cooling efficiency of houses in design. Research utilization and program management were either aspects of this program.

  11. Photovoltaic industry progress through 1984

    SciTech Connect (OSTI)

    Watts, R.L.; Smith, S.A.; Dirks, J.A.

    1985-04-01T23:59:59.000Z

    The growth of the US photovoltaics (PV) industry over the past decade has been impressive. First designed to provide power for satellites using high-cost production techniques, PV is now the economical choice in many remote terrestrial applications. The remarkable growth of PV in terms of quality of cells and modules, production techniques, and system design, was initiated by a cooperative effort of the US Government and the domestic PV manufacturers. European and Japanese firms entered the PV industry later, but are also growing rapidy. The Europeans continue to supply PV systems for village electrification and water pumping to many Third World countries. The Japanese have been developing the amorphous silicon (A-Si) technology by expanding its use in consumer goods. The world PV industry saw dramatic changes in industry ownership and in the emphasis on developing new and improved technology during 1984. The objective of this report is to present information on the developments of the world PV industry and focuses on developments occurring in 1984. Information is presented on a regional basis (US, Europe, Japan, other) to avoid disclosing company-confidential data. All information was gleaned from several sources, including a review of the technical literature and direct contacts with PV manufacturers. Prior to publishing the regional totals, all numbers were compared with those of other sources. The information contained in this report is prepared for use by the Department of Energy for their use in long-term R and D planning. However, this information should also be of interest by PV manufacturers and to those who may be contemplating entering the PV market. PV shipments for 1984, government supports for PV, and various PV market sectors are discussed.

  12. Method for manufacturing a rotor having superconducting coils

    DOE Patents [OSTI]

    Driscoll, David I. (South Euclid, OH); Shoykhet, Boris A. (Beachwood, OH)

    2001-01-01T23:59:59.000Z

    A method and apparatus for manufacturing a rotor for use with a rotating machine is provided that employs a superconducting coil on the rotor. An adhesive is applied to an outer surface of the rotor body, which may include a groove disposed within an outer surface of the rotor body. A superconducting coil is then mounted onto the rotor body such that the adhesive bonds the superconducting coil to the rotor body.

  13. CAREER VIEW CAREER DEVELOPMENT AND EMPLOYMENT INFORMATION SERIES

    E-Print Network [OSTI]

    Frean, Marcus

    of consumers, households and companies, which comes down to such factors as individual prices, wage rates and international viewpoint. Top- ics of analysis include the study of employment, inflation, industrial production events such as changes in oil prices, world sharemarkets, wars, business confidence, etc. This is typi

  14. MANUFACTURING ACCELERATING THE INCORPORATION OF MATERIALS

    E-Print Network [OSTI]

    Magee, Joseph W.

    MANUFACTURING ACCELERATING THE INCORPORATION OF MATERIALS ADVANCES INTO MANUFACTURING PROCESSES NATIONAL NEED The proposed topic "Accelerating the Incorporation of Materials Advances into Manufacturing organizations, leading researchers from academic institutions, and others. Materials performance is often

  15. U.S. Wind Energy Manufacturing and Supply Chain: A Competitiveness Analysis

    SciTech Connect (OSTI)

    Fullenkamp, Patrick H; Holody, Diane S

    2014-06-15T23:59:59.000Z

    The goal of the project was to develop a greater understanding of the key factors determining wind energy component manufacturing costs and pricing on a global basis in order to enhance the competitiveness of U.S. manufacturers, and to reduce installed systems cost. Multiple stakeholders including DOE, turbine OEMs, and large component manufactures will all benefit by better understanding the factors determining domestic competitiveness in the emerging offshore and next generation land-based wind industries. Major objectives of this project were to: 1. Carry out global cost and process comparisons for 5MW jacket foundations, blades, towers, and permanent magnet generators; 2. Assess U.S. manufacturers’ competitiveness and potential for cost reduction; 3. Facilitate informed decision-making on investments in U.S. manufacturing; 4. Develop an industry scorecard representing the readiness of the U.S. manufacturers’ to produce components for the next generations of wind turbines, nominally 3MW land-based and 5MW offshore; 5. Disseminate results through the GLWN Wind Supply Chain GIS Map, a free website that is the most comprehensive public database of U.S. wind energy suppliers; 6. Identify areas and develop recommendations to DOE on potential R&D areas to target for increasing domestic manufacturing competitiveness, per DOE’s Clean Energy Manufacturing Initiative (CEMI). Lists of Deliverables 1. Cost Breakdown Competitive Analyses of four product categories: tower, jacket foundation, blade, and permanent magnet (PM) generator. The cost breakdown for each component includes a complete Bill of Materials with net weights; general process steps for labor; and burden adjusted by each manufacturer for their process categories of SGA (sales general and administrative), engineering, logistics cost to a common U.S. port, and profit. 2. Value Stream Map Competitiveness Analysis: A tool that illustrates both information and material flow from the point of getting a customer order at the manufacturing plant; to the orders being forwarded by the manufacturing plant to the material suppliers; to the material being received at the manufacturing plant and processed through the system; to the final product being shipped to the Customer. 3. Competitiveness Scorecard: GLWN developed a Wind Industry Supply Chain Scorecard that reflects U.S. component manufacturers’ readiness to supply the next generation wind turbines, 3MW and 5MW, for land-based and offshore applications. 4. Wind Supply Chain Database & Map: Expand the current GLWN GIS Wind Supply Chain Map to include offshore elements. This is an on-line, free access, wind supply chain map that provides a platform for identifying active and emerging suppliers for the land-based and offshore wind industry, including turbine component manufacturers and wind farm construction service suppliers.

  16. Wind power manufacturing and supply chain summit USA.

    SciTech Connect (OSTI)

    Hill, Roger Ray

    2010-12-01T23:59:59.000Z

    The area of wind turbine component manufacturing represents a business opportunity in the wind energy industry. Modern wind turbines can provide large amounts of electricity, cleanly and reliably, at prices competitive with any other new electricity source. Over the next twenty years, the US market for wind power is expected to continue to grow, as is the domestic content of installed turbines, driving demand for American-made components. Between 2005 and 2009, components manufactured domestically grew eight-fold to reach 50 percent of the value of new wind turbines installed in the U.S. in 2009. While that growth is impressive, the industry expects domestic content to continue to grow, creating new opportunities for suppliers. In addition, ever-growing wind power markets around the world provide opportunities for new export markets.

  17. Innovations in the Use of Nuclear Energy for Sustainable Manufacturing

    SciTech Connect (OSTI)

    J. Stephen Herring

    2010-10-01T23:59:59.000Z

    Abstract Over the next 50 years, nuclear energy will become increasingly important in providing the electricity and heat needed both by the presently industrialized countries and by those countries which are now developing their manufacturing industries. The twin concerns of global climate change and of the vulnerability of energy supplies caused by increasing international competition will lead to a greater reliance on nuclear energy for both electricity and process heat. Conservative estimates of new nuclear construction indicate a 50% increase in capacity by 2030. Other estimates predict a tripling of present capacity. Required machine tool technologies will include the improvements in the manufacture of standard LWR components, such as pressure vessels and pumps. Further in the future, technologies for working high temperature metals and ceramics will be needed and will require new machining capabilities.

  18. Marina Matosic Careers & Employability Service

    E-Print Network [OSTI]

    a function that is intrinsic to the work concerned #12;6 Access To Work (ATW) · Provides practical advice your employment status ATW pays 100% of approved costs of · Support workers · Fares to work To Work (ATW) #12;8 Disability Symbol or 2 Ticks "friendly" Employers Awarded this for making 5

  19. Advanced Technology Vehicles Manufacturing Incentive Program...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program This is an interim final rule that establishes the...

  20. Additive Manufacturing Cluster Strategy | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additive Manufacturing Cluster Strategy SHARE Additive Manufacturing Cluster Strategy As the nation's premier research laboratory, ORNL is one of the world's most capable resources...

  1. Advanced Qualification of Additive Manufacturing Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events Additive Manufacturing Workshop Poster Abstract Submission - deadline July 10, 2015 Advanced Qualification of Additive Manufacturing Materials using in situ sensors,...

  2. Welcome and Advanced Manufacturing Partnership (Text Version...

    Broader source: Energy.gov (indexed) [DOE]

    200 school aged students go into this manufacturing demonstration facility and make 3D printing or other manufacturing parts. Design and make parts for their robots. For their...

  3. National Electrical Manufacturers Association (NEMA) Response...

    Energy Savers [EERE]

    Electrical Manufacturers Association (NEMA) Response to Smart Grid RFI National Electrical Manufacturers Association (NEMA) Response to Smart Grid RFI The National Electrical...

  4. Technologies Enabling Agile Manufacturing (TEAM) ? an ORCMT...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technologies Enabling Agile Manufacturing (TEAM) - An ORCMT success story Technologies Enabling Agile Manufacturing (TEAM) was one of the larger programs to come from the...

  5. Alternative Energy Product Manufacturers Tax Credit | Department...

    Broader source: Energy.gov (indexed) [DOE]

    and Revenue Provider New Mexico Energy, Minerals and Natural Resources Department The Alternative Energy Product Manufacturers tax credit may be claimed for manufacturing...

  6. Additive Manufacturing Opportunities for Transportation | ornl...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additive Manufacturing Opportunities for Transportation Mar 13 2015 10:00 AM - 11:00 AM Lonnie Love, Manufacturing Systems Research Group Transportation Science Seminar Series...

  7. Clean Energy Manufacturing Initiative: Increasing American Competitive...

    Broader source: Energy.gov (indexed) [DOE]

    for a Clean Energy Manufacturing Innovation Institute related to composite materials and structures. The Manufacturing Demonstration Facility at Oak Ridge National...

  8. Vehicle Technologies Office Merit Review 2014: Manufacturability...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturability Study and Scale-Up for Large Format Lithium Ion Batteries Vehicle Technologies Office Merit Review 2014: Manufacturability Study and Scale-Up for Large Format...

  9. Advanced Manufacturing Initiative Improves Turbine Blade Productivity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Initiative Improves Turbine Blade Productivity Advanced Manufacturing Initiative Improves Turbine Blade Productivity May 20, 2011 - 2:56pm Addthis This is an...

  10. Manufacturing Barriers to High Temperature PEM Commercialization...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Barriers to High Temperature PEM Commercialization Manufacturing Barriers to High Temperature PEM Commercialization Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D...

  11. 2010 Manufacturing Energy and Carbon Footprints: Definitions...

    Broader source: Energy.gov (indexed) [DOE]

    key terms and details assumptions and references used in the Manufacturing Energy and Carbon Footprints (2010 MECS) Definitions and Assumptions for the Manufacturing Energy and...

  12. Understanding Manufacturing Energy and Carbon Footprints, October...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Understanding the 2010 Manufacturing Energy and Carbon Footprints U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis Cement...

  13. Process systems engineering of continuous pharmaceutical manufacturing

    E-Print Network [OSTI]

    Abel, Matthew J

    2010-01-01T23:59:59.000Z

    Continuous manufacturing offers a number of operational and financial benefits to pharmaceutical companies. This research examines the critical blending step for continuous pharmaceutical manufacturing and the characteristics ...

  14. u.s. department of commerce national institute of standards and technology manufacturing extension partnership W W W . n i s t . g o v / m e p 1 -8 0 0 -m e p -4 m F g

    E-Print Network [OSTI]

    Perkins, Richard A.

    of hydraulic machining and plating services with expertise in designing and manufacturing new products also introduced Swanson Industries to opportunities in the wind turbine supply chain. An assessment

  15. Proposal for a Guide for Quality Management Systems for PV Manufacturing: Supplemental Requirements to ISO 9001-2008 (Revised)

    SciTech Connect (OSTI)

    Norum, P.; Sinicco, I.; Eguchi, Y.; Lokanath, S.; Zhou, W.; Brueggemann, G.; Mikonowicz, A.; Yamamichi, M.; Kurtz, S.

    2013-09-01T23:59:59.000Z

    This technical specification provides a guideline for photovoltaic module manufacturers to produce modules that, once the design has proven to meet the quality and reliability requirements, replicate such design in an industrial scale without compromising its consistency with the requirements.

  16. The critical role of manufacturing-process innovation on product development excellence in high-technology companies

    E-Print Network [OSTI]

    Duarte, Carlos E. A., 1962-

    2004-01-01T23:59:59.000Z

    Few managers of high-technology companies view manufacturing-process development as primary source of competitive advantage. For the last two decades trends have shown an increasing number of high-tech industries outsourcing ...

  17. Interfuel Substitution and Energy Use in the UK Manufacturing Sector

    E-Print Network [OSTI]

    Steinbuks, Jevgenijs

    of the following reasons. First, studies based on the aggregate data fail to account for large di¤erences in technological requirements for fuel types used in speci?c industries. For ex- ample, most cement kilns today use coal and petroleum coke as primary fuels... in the manufacturing processes. Waverman (1992) pointed out that fuels used by industrial sectors for non-energy purposes, such as coking coal, petrochemical feedstocks, or lubricants, have few available substitutes, and should therefore be excluded from the data...

  18. Advanced Manufacture of Reflectors

    SciTech Connect (OSTI)

    Angel, Roger [University of Arizona

    2014-12-17T23:59:59.000Z

    The main project objective has been to develop an advanced gravity sag method for molding large glass solar reflectors with either line or point focus, and with long or short focal length. The method involves taking standard sized squares of glass, 1.65 m x 1.65 m, and shaping them by gravity sag into precision steel molds. The method is designed for high volume manufacture when incorporated into a production line with separate pre-heating and cooling. The performance objectives for the self-supporting glass mirrors made by this project include mirror optical accuracy of 2 mrad root mean square (RMS), requiring surface slope errors <1 mrad rms, a target not met by current production of solar reflectors. Our objective also included development of new methods for rapidly shaping glass mirrors and coating them for higher reflectivity and soil resistance. Reflectivity of 95% for a glass mirror with anti-soil coating was targeted, compared to the present ~94% with no anti-soil coating. Our mirror cost objective is ~$20/m2 in 2020, a significant reduction compared to the present ~$35/m2 for solar trough mirrors produced for trough solar plants. During the first year a custom batch furnace was built to develop the method with high power radiative heating to simulate transfer of glass into a hot slumping zone in a production line. To preserve the original high polish of the float glass on both front and back surfaces, as required for a second surface mirror, the mold surface is machined to the required shape as grooves which intersect the glass at cusps, reducing the mold contact area to significantly less than 1%. The mold surface is gold-plated to reflect thermal radiation. Optical metrology of glass replicas made with the system has been carried out with a novel, custom-built test system. This test provides collimated, vertically-oriented parallel beams from a linear array of co-aligned lasers translated in a perpendicular direction across the reflector. Deviations of each reflected beam from the paraboloid focus give a direct measure of surface slope error. Key findings • A gravity sag method for large (2.5 m2) second surface glass solar reflectors has been developed and demonstrated to a uniquely high level of accuracy. Mirror surface slope accuracy of 0.65 mrad in one dimension, 0.85 mrad in 2 dimensions (point focus) has been demonstrated by commercial partner REhnu using this process. This accuracy exceeds by a factor of two current solar reflector accuracy. Our replicas meet the Sunshot accuracy objective of 2 mrad optical, which requires better than 1 mrad rms slope error. • Point-focus as well as line-focus mirrors have been demonstrated at 1.65 m x 1.65 m square – a unique capability. • The new process using simple molds is economical. The molds for the 1.65 m square reflectors are bent and machined steel plates on a counter-weighted flotation support. To minimize thermal coupling by radiative heat transfer, the mold surface is grooved and gilded. The molds are simple to manufacture, and have minimal thermal stresses and distortion in use. Lapping and bending techniques have been developed to obtain better than 1 mrad rms surface mold accuracy. Float glass is sagged into the molds by rapid radiative heating, using a custom high power (350 kW) furnace. The method of manufacture is well suited for small as well as large volume production, and as it requires little capital investment and no high technology, it could be used anywhere in the world to make solar concentrating reflectors. • A novel slope metrology method for full 1.65 aperture has been demonstrated, with 25 mm resolution across the face of the replicas. The method is null and therefore inherently accurate: it can easily be reproduced without high-tech equipment and does not need sophisticated calibration. We find by cross calibration with reference trough reflectors from RioGlass that our null-test laser system yields a measurement accuracy better than 0.4 mrad rms slope error. Our system is inexpensive and could have broad application for test

  19. DUAL EMPLOYMENT REVISED SCHEDULE REQUEST NAME: ____________________________________________________ EMPLID: ______________________________

    E-Print Network [OSTI]

    Bolding, M. Chad

    DUAL EMPLOYMENT REVISED SCHEDULE REQUEST NAME: _______________________ DUAL EMPLOYMENT DATES: ____________________ TO ______________________ TIMES: __________________ AM SCHEDULE. IN ACCORDANCE WITH THE CLEMSON UNIVERSITY DUAL EMPLOYMENT POLICY, ALL HOURS MISSED WHILE

  20. Distributed Multi-robot Work Load Partition In Manufacturing Girma S Tewolde, Changhua Wu, Yu Wang, Weihua Sheng

    E-Print Network [OSTI]

    Wang, Yu

    manufacturing and industrial scenarios, mobile robots are used to service a large number of points of interestDistributed Multi-robot Work Load Partition In Manufacturing Automation Girma S Tewolde, Changhua multiple mobile robots for servicing large numbers of points of interest in a distributed fashion

  1. Deputy Director, Advanced Manufacturing Office

    Broader source: Energy.gov [DOE]

    This position is located in the Advanced Manufacturing Office (AMO), within the Office of Energy Efficiency and Renewable Energy (EERE). EERE leads the U.S. Department of Energy's efforts to...

  2. Wind Energy Manufacturing Tax Incentive

    Broader source: Energy.gov [DOE]

    With the passage of [http://www.arkansasenergy.org/media/261385/act736.pdf HB 2230 (2009)] in April 2009, the Arkansas Legislature expanded a tax incentive for manufacturers of windmill blades or...

  3. Manufacturing System Design Framework Manual

    E-Print Network [OSTI]

    Vaughn, Amanda

    2002-01-01T23:59:59.000Z

    Previous Lean Aerospace Initiative research in factory operations had indicated that the greatest performance gains are realized when the manufacturing system is designed from the top down and from supplier to the customer. ...

  4. CFL Manufacturers: ENERGY STAR Letters

    Broader source: Energy.gov [DOE]

    DOE issued letters to 25 manufacturers of compact fluorescent lamps (CFLs) involving various models after PEARL Cycle 9 testing indicated that the models do not meet the ENERGY STAR specification and, therefore, are disqualified from the ENERGY STAR Program.

  5. Development of High Temperature Capacitor Technology and Manufacturing Capability

    SciTech Connect (OSTI)

    None

    2011-05-15T23:59:59.000Z

    The goal of the Development of High Temperature Capacitor Technology and Manufacturing Capability program was to mature a production-ready supply chain for reliable 250°C FPE (fluorinated polyester) film capacitors by 2011. These high-temperature film capacitors enable both the down hole drilling and aerospace industries by enabling a variety of benefits including: ? Deeper oil exploration in higher temperature and pressure environments ? Enabling power electronic and control equipment to operate in higher temperature environments ? Enabling reduced cooling requirements of electronics ? Increasing reliability and life of capacitors operating below rated temperature ? Enabling capacitors to handle higher electrical losses without overheating. The key challenges to bringing the FPE film capacitors to market have been manufacturing challenges including: ? FPE Film is difficult to handle and wind, resulting in poor yields ? Voltage breakdown strength decreases when the film is wound into capacitors (~70% decrease) ? Encapsulation technologies must be improved to enable higher temperature operation ? Manufacturing and test cycle time is very long As a direct result of this program most of the manufacturing challenges have been met. The FPE film production metalization and winding yield has increased to over 82% from 70%, and the voltage breakdown strength of the wound capacitors has increased 270% to 189 V/?m. The high temperature packaging concepts are showing significant progress including promising results for lead attachments and hermetic packages at 200°C and non-hermetic packages at 250°C. Manufacturing and test cycle time will decrease as the market for FPE capacitors develops.

  6. Energy Flow Models for the Steel Industry

    E-Print Network [OSTI]

    Hyman, B.; Andersen, J. P.

    Energy patterns in the U. S. steel industry are examined using several models. First is an end-use model based on data in the 1994 Manufacturing Energy Consumption Survey (MECS). Then a seven-step process model is presented and material flow through...

  7. Big Efficieny for Small Manufacturing

    E-Print Network [OSTI]

    Trombley, D.

    2014-01-01T23:59:59.000Z

    , Energize Connecticut Small commercial and industrial customers ? Peak demand between 10 & 200 kW ESL-IE-14-05-10 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans...

  8. The Productivity Dilemma in Manufacturing

    E-Print Network [OSTI]

    Byrer, T. G.

    1983-01-01T23:59:59.000Z

    industry's needs, improve productivity, and reduce costs is known, but the technology transfer needed to impact our industrial productivity has not taken place. A key factor in accomplishing technology transfer and implementation is the availability...

  9. Manufactured Home Testing in Simulated and Naturally Occurring High Winds

    SciTech Connect (OSTI)

    W. D. Richins; T. K. Larson

    2006-08-01T23:59:59.000Z

    A typical double-wide manufactured home was tested in simulated and naturally occurring high winds to understand structural behavior and improve performance during severe windstorms. Seven (7) lateral load tests were conducted on a double-wide manufactured home at a remote field test site in Wyoming. An extensive instrumentation package monitored the overall behavior of the home and collected data vital to validating computational software for the manufactured housing industry. The tests were designed to approach the design load of the home without causing structural damage, thus allowing the behavior of the home to be accessed when the home was later exposed to high winds (to 80-mph). The data generally show near-linear initial system response with significant non-linear behavior as the applied loads increase. Load transfer across the marriage line is primarily compression. Racking, while present, is very small. Interface slip and shear displacement along the marriage line are nearly insignificant. Horizontal global displacements reached 0.6 inch. These tests were designed primarily to collect data necessary to calibrate a desktop analysis and design software tool, MHTool, under development at the Idaho National Laboratory specifically for manufactured housing. Currently available analysis tools are, for the most part, based on methods developed for “stick built” structures and are inappropriate for manufactured homes. The special materials utilized in manufactured homes, such as rigid adhesives used in the connection of the sheathing materials to the studs, significantly alter the behavior of manufactured homes under lateral loads. Previous full scale tests of laterally loaded manufactured homes confirm the contention that conventional analysis methods are not applicable. System behavior dominates the structural action of manufactured homes and its prediction requires a three dimensional analysis of the complete unit, including tiedowns. This project was sponsored by the US Department of Energy, US Department of Housing and Urban Development, and the Manufactured Housing Institute. The results of this research can lead to savings in annual losses of life and property by providing validated information to enable the advancement of code requirements and by developing engineering software that can predict and optimize wind resistance.

  10. Information Technology Services Application for Student Employment

    E-Print Network [OSTI]

    Moore, Paul A.

    Information Technology Services Application for Student Employment 209 Hayes Hall Personal NO YES NO Work Experience: Last Employer: Supervisor: Job Description: Employer Phone: Address: Until: PG: Email: Release of Information: Work Experience Continued: Supervisor: Job Description: Employer Phone

  11. Manufactured Home Energy Audit (MHEA)Users Manual (Version 7)

    SciTech Connect (OSTI)

    Gettings, M.B.

    2003-01-27T23:59:59.000Z

    The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the U.S. Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA uses a relatively standard Windows graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment appliances, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. Weatherization retrofit measures are evaluated based on the predicted energy savings after installation of the measure, the measure cost, and the measure life. Finally, MHEA recommends retrofit measures that are energy and cost effective for the particular home being evaluated. MHEA evaluates each manufactured home individually and takes into account local weather conditions, retrofit measure costs, and fuel costs. The recommended package of weatherization retrofit measures is tailored to the home being evaluated. More traditional techniques apply the same package of retrofit measures to all manufactured homes, often the same set of measures that are installed into site-built homes. Effective manufactured home weatherization can be achieved only by installing measures developed specifically for manufactured homes. The unique manufactured home construction characteristics require that each of these measures is evaluated separately in order to devise a package of measures that will result in high energy and dollar savings. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes. The National Renewable Energy Laboratory originally developed MHEA for the U.S. Department of Energy Weatherization Assistance Program. Conversion to a Windows-based program with additional modifications has been performed by the Oak Ridge National Laboratory. Many energy consumption and economic calculations resemble those found in the Computerized Instrumented Residential Audit written by Lawrence Berkeley National Laboratory and the National Energy Audit written by Oak Ridge National Laboratory. The calculations are similar in structure but have been altered to more accurately represent a manufactured home's unique energy use characteristics. Most importantly, MHEA helps meet the DOE Weatherization Assistance Program goals to increase client comfort and use federal dollars wisely.

  12. Combined Heat & Power (CHP) -A Clean Energy Solution for Industry

    E-Print Network [OSTI]

    Parks, H.; Hoffman, P.; Kurtovich, M.

    From the late 1970's to the early 1990's cogeneration or CHP saw enormous growth, especially in the process industries. By 1994, CHP provided 42 GW of electricity generation capacity -about 6 percent of the U.S. total. Three manufacturing industries...

  13. Vermont Employment Growth Incentive (Vermont)

    Broader source: Energy.gov [DOE]

    The purpose of the Employment Growth Incentive (VEGI) is to encourage job creation in Vermont by a Vermont company, a Vermont division of a company that plans to grow and expand in Vermont, a...

  14. Employment Incentive Credit (New York)

    Broader source: Energy.gov [DOE]

    The Employment Incentive Credit is through the New York State Department of Taxation and Finance based on the same qualifying investment for the ITC. The credit is equal to 1.5% to 2.5% of...

  15. Employment of Experts and Consultants

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-11-06T23:59:59.000Z

    To maintain a system of controls and oversight necessary for the DOE to assure compliance with 5, U.S.C. Section 3109, "Employment of Experts and Consultants, Temporary or Intermittent"; Title 5, Code of Federal Regulations, Part 304, "Expert and Consultant Appointments"; and all other relevant rules, regulations, and DOE directives. Cancels DOE O 3304.1A, Employment of Experts and Consultants, dated 6-23-92.

  16. Designing a National Network for Manufacturing Innovation

    E-Print Network [OSTI]

    Designing a National Network for Manufacturing Innovation NNMI and The Additive Manufacturing Pilot Introduction · NNMI principles · Public NMMI Design · Pilot Institute on Additive Manufacturing #12;IMI Mission Process, such as Additive Manufacturing An Advanced Material ­ e.g. lightweight, low cost carbon fiber

  17. This information describes typical occupations and employment settings associated with this major. Understand that some of these options may require additional training. Moreover, you are not limited to these options when choosing a possible career path.

    E-Print Network [OSTI]

    Arnold, Jonathan

    . Understand that some of these options may require additional training. Moreover, you are not limited into large-scale manufacturing. In fact, they are integral to a variety of manufacturing industries, such as food manufacturing and agro-technology. Researching Job Titles and Careers O*NET http

  18. EMPLOYMENT SUMMARY San Francisco, CA 94117

    E-Print Network [OSTI]

    Galles, David

    EMPLOYMENT SUMMARY San Francisco, CA 94117 Website : http://www.usfca.edu/law/ Phone : 415 Employment status unknown 7 Unemployed - not seeking 5 Employed 156 78 64 Pursuing graduate degree FT 1 EMPLOYMENT STATUS NUMBER LONG TERM SHORT TERM Of employed - # law school funded 30 1 29 EMPLOYMENT BY LAW

  19. employment

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA Approved: 5-13-14Russian NuclearNational5/%2A en Office|3 Issuerecovery3/%2A en

  20. Clean Energy Manufacturing: U.S. Competitiveness and State Policy Strategies (Presentation)

    SciTech Connect (OSTI)

    Lantz, E.

    2014-02-01T23:59:59.000Z

    The capital intensive nature of clean energy technologies suggests that manufacturing clean energy equipment has the potential to support state and local economic development efforts. However, manufacturing siting decisions tend to be complex and multi-variable decision processes that require in-depth knowledge of specific markets, the logistical requirements of a given technology, and insight into global clean tech trends. This presentation highlights the potential of manufacturing in supporting economic development opportunities while also providing examples of the financial considerations affecting manufacturing facility siting decisions for wind turbine blades and solar PV. The presentation also includes discussion of other more qualitative drivers of facility siting decisions as gleaned from NREL industry interviews and discusses strategies state and local policymakers may employee to bolster their chances of successfully attracting clean energy manufacturers to their localities.

  1. The Fourth Annual DOE Solid-State Lighting Manufacturing R&D Workshop

    Broader source: Energy.gov [DOE]

    Two hundred lighting industry leaders from across the country, representing every link in the supply chain—from chip makers, to luminaire manufacturers, to material and equipment suppliers, to packagers, to luminaire testers, to the makers of testing equipment—gathered in San Jose, CA, June 13–14, 2012, to share insights, ideas, and updates at the fourth annual Solid-State Lighting (SSL) Manufacturing R&D Workshop, hosted by DOE. The workshop is a key component of an initiative launched by DOE in 2009 to enhance the quality and lower the cost of SSL products through improvements in manufacturing equipment and processes, and to foster a significant manufacturing role in the U.S. This year in San Jose, attendees explored a wide range of related topics and focused on reexamining and updating the DOE Manufacturing R&D Roadmap.

  2. The Third Annual DOE Solid-State Lighting Manufacturing R&D Workshop

    Broader source: Energy.gov [DOE]

    More than 250 lighting industry leaders from across the country, representing every link in the supply chain—from chip makers, to luminaire manufacturers, to material and equipment suppliers, to packagers, to luminaire testers, to the makers of testing equipment—gathered in Boston April 12–13, 2011, to share insights, ideas, and updates at the third annual Solid-State Lighting (SSL) Manufacturing R&D Workshop, hosted by DOE. The workshop is a key component of an initiative launched by DOE in 2009 to enhance the quality and lower the cost of SSL products through improvements in manufacturing equipment and processes and to foster a significant manufacturing role in the U.S. This year in Boston, attendees explored a wide range of related topics and focused on reexamining and updating the DOE Manufacturing R&D Roadmap.

  3. The Second Annual DOE Solid-State Lighting Manufacturing R&D Workshop

    Broader source: Energy.gov [DOE]

    More than 250 industry leaders from all corners of the supply chain – including chip makers, luminaire manufacturers, material and equipment suppliers, packagers, luminaire testers, and makers of testing equipment – gathered in San Jose, CA, April 21-22, 2010, to share insights, ideas, and updates at the second annual Solid-State Lighting (SSL) Manufacturing R&D Workshop, hosted by DOE. This workshop is a key part of an initiative launched by DOE in 2009 to enhance the quality and lower the cost of SSL products through improvements in manufacturing equipment and processes and to foster a significant manufacturing role in the U.S. This year in San Jose, attendees explored a wide range of related topics and focused on reexamining and updating the DOE Manufacturing R&D Roadmap.

  4. Manufacturing Energy and Carbon Footprints (2006 MECS)

    Broader source: Energy.gov [DOE]

    Energy and Carbon Footprints provide a mapping of energy from supply to end use in manufacturing. They show us where energy is used and lost—and where greenhouse gases (GHGs) are emitted. Footprints are available below for 15 manufacturing sectors (representing 94% of all manufacturing energy use) and for U.S. manufacturing as a whole. Analysis of these footprints is also available in the U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis report.

  5. Technology reinvestment project manufacturing education and training: Engineering education in manufacturing across the curriculum. Annual report, June 24, 1994--June 23, 1995

    SciTech Connect (OSTI)

    Mulholland, G.; Powers, T.L.

    1995-09-29T23:59:59.000Z

    The goal of this project is to impart to engineering and business students, and to students from industry, the broad knowledge and practical skills to immediately help a manufacturing company become more competitive in any global economy while still providing a high quality work force for the 21st century. An integration of innovative, cross-disciplinary, manufacturing engineering and business education provided hand in hand with industry, will enable students, especially minority students, to have a real impact on manufacturing in this depressed region. The program was shortened and simplified to meet a budget of $2,000,000 versus the $3,000,000 in the-Proposal. All major objectives in the revised plan for the first year have been achieved with expenditures somewhat under the revised budget. Curriculum development with the advice and assistance of industry is ahead of schedule. Graduate minor degree curricula have been defined in Engineering and in Business. A summer intern project and guest lecture series have been well supported by industry. Facilities including advanced software have been brought on line. Cash and in-kind matching funds from industry, NMSU and the State total over $6m; this is 920% of the TRP funds expended. Cost sharing of cash is ahead of plan, of in-kind is slightly behind. The first group of 21 students have started one semester sooner than planned. The group is 25% minority and 45% female. Industry requests to interview graduates are coming in anticipation of availability in the spring of 1996.

  6. Influence of Manufacturing Processes on the Performance of Phantom Lungs

    SciTech Connect (OSTI)

    Traub, Richard J.

    2008-10-01T23:59:59.000Z

    Chest counting is an important tool for estimating the radiation dose to individuals who have inhaled radioactive materials. Chest counting systems are calibrated by counting the activity in the lungs of phantoms where the activity in the phantom lungs is known. In the United States a commonly used calibration phantom was developed at the Lawrence Livermore National Laboratory and is referred to as the Livermore Torso Phantom. An important feature of this phantom is that the phantom lungs can be interchanged so that the counting system can be challenged by different combinations of radionuclides and activity. Phantom lungs are made from lung tissue substitutes whose constituents are foaming plastics and various adjuvants selected to make the lung tissue substitute similar to normal healthy lung tissue. Some of the properties of phantom lungs cannot be readily controlled by phantom lung manufacturers. Some, such as density, are a complex function of the manufacturing process, while others, such as elemental composition of the bulk plastic are controlled by the plastics manufacturer without input, or knowledge of the phantom manufacturer. Despite the fact that some of these items cannot be controlled, they can be measured and accounted for. This report describes how manufacturing processes can influence the performance of phantom lungs. It is proposed that a metric that describes the brightness of the lung be employed by the phantom lung manufacturer to determine how well the phantom lung approximates the characteristics of a human lung. For many purposes, the linear attenuation of the lung tissue substitute is an appropriate surrogate for the brightness.

  7. The DOE s In-Plant Training (INPLT) Model to Promote Energy Efficiency in the Industrial Sector

    SciTech Connect (OSTI)

    Alkadi, Nasr E [ORNL] [ORNL; Nimbalkar, Sachin U [ORNL] [ORNL; De Fontaine, Mr. Andre [United States Department of Energy (DOE), Industrial Technology Program] [United States Department of Energy (DOE), Industrial Technology Program; Schoeneborn, Fred C [ORNL] [ORNL

    2013-01-01T23:59:59.000Z

    In-Plant Training (INPLT) is a new model for developing energy efficiency expertise within the US manufacturing companies participating in the U.S. Department of Energy s (DOE s) Better Buildings, Better Plants Program-a nationwide initiative to drive a 25% reduction in industrial energy intensity in 10 years. INPLTs are designed to fill a market niche by providing hands on training in a real world manufacturing plant environment. Through INPLTs, participants from multiple manufacturing plants, supply chains, utilities, and other external stakeholders learn how to conduct energy assessments, use energy analysis tools to analyze energy saving opportunities, develop energy management systems, and implement energy savings projects. Typical INPLT events are led by DOE-certified Energy Experts and range from 2-4 days. Topics discussed include: identification of cross-cutting or system specific opportunities; introduction to ISO 50001 Energy Management Systems; and energy project implementation and replication. This model is flexible, and can be tailored to suit the needs of specific industries. The INPLTs are a significant departure from the traditional single plant energy assessment model previously employed by DOE. INPLTs shift the focus from the concept of a single-plant s energy profile to a broader focus on training and capacity building among multiple industrial participants. The objective is to enable trainees to identify, quantify, implement and replicate future energy saving projects without continued external assistance. This paper discusses the INPLT model and highlights some of the initial outcomes from the successfully delivered INPLTs and the overall impact in terms of numbers of plants/participants trained, impacted energy footprints, and potential replication of identified opportunities.

  8. Development of a performance-based industrial energy efficiency indicator for corn refining plants.

    SciTech Connect (OSTI)

    Boyd, G. A.; Decision and Information Sciences; USEPA

    2006-07-31T23:59:59.000Z

    Organizations that implement strategic energy management programs have the potential to achieve sustained energy savings if the programs are carried out properly. A key opportunity for achieving energy savings that plant managers can take is to determine an appropriate level of energy performance by comparing their plant's performance with that of similar plants in the same industry. Manufacturing facilities can set energy efficiency targets by using performance-based indicators. The U.S. Environmental Protection Agency (EPA), through its ENERGY STAR{reg_sign} program, has been developing plant energy performance indicators (EPIs) to encourage a variety of U.S. industries to use energy more efficiently. This report describes work with the corn refining industry to provide a plant-level indicator of energy efficiency for facilities that produce a variety of products--including corn starch, corn oil, animal feed, corn sweeteners, and ethanol--for the paper, food, beverage, and other industries in the United States. Consideration is given to the role that performance-based indicators play in motivating change; the steps needed to develop indicators, including interacting with an industry to secure adequate data for an indicator; and the actual application and use of an indicator when complete. How indicators are employed in the EPA's efforts to encourage industries to voluntarily improve their use of energy is discussed as well. The report describes the data and statistical methods used to construct the EPI for corn refining plants. Individual equations are presented, as are the instructions for using them in an associated Excel spreadsheet.

  9. Optical 3-D Measurement Techniques, 9-12 July 2007, Zurich Kohoutek, T. Monitoring of an Industrial Robot by Processing of 3D Range

    E-Print Network [OSTI]

    of an Industrial Robot by Processing of 3D Range Imaging Data Measured by the SwissRanger®SR-3000 Diploma Thesis TU (Switzerland) Industrial robots are commonly used in manufacturing industry, especially in automobile industry environments. The weight and high speeds of industrial robots, and resulting high tuning moments cause harmful

  10. Power Quality from the Manufacturer’s Standpoint

    E-Print Network [OSTI]

    McEachern, A.

    Power quality is an unstable field (if you'll pardon the double meaning). It's in its infancy; there isn't general agreement on much, not even terminology. As an instrument manufacturer in the field, I'm particularly concerned with two philosophical...

  11. Manufacturing for the Hydrogen Economy Manufacturing Research & Development

    E-Print Network [OSTI]

    to coordinate and leverage the current federal efforts focused on manufacturability issues such as low-cost of the hydrogen and fuel cell technologies needed to move the United States toward a future hydrogen economy of a hydrogen energy economy, moving from today's laboratory-scale fabrication technologies to high

  12. Computer Science This sheet has sample occupations, work settings, employers, and career development activities associated with this major. Some of these

    E-Print Network [OSTI]

    Ronquist, Fredrik

    Computer Science This sheet has sample occupations, work settings, employers, and career Occupations Computer Operations Computer Hardware/ Software Engineer Computer Operator Database Manager/ Administrator Data Entry Operator Operations Manager Design & Manufacturing, Engineering Computer Applications

  13. Industrial fouling: problem characterization, economic assessment, and review of prevention, mitigation, and accommodation techniques

    SciTech Connect (OSTI)

    Garrett-Price, B.A.; Smith, S.A.; Watts, R.L.

    1984-02-01T23:59:59.000Z

    A comprehensive overview of heat exchanger fouling in the manufacturing industries is provided. Specifically, this overview addresses: the characteristics of industrial fouling problems; the mitigation and accommodation techniques currently used by industry; and the types and magnitude of costs associated with industrial fouling. A detailed review of the fouling problems, costs and mitigation techniques is provided for the food, textile, pulp and paper, chemical, petroleum, cement, glass and primary metals industries.

  14. Energy Efficiency Improvement and Cost Saving Opportunities for the Petrochemical Industry - An ENERGY STAR(R) Guide for Energy and Plant Managers

    E-Print Network [OSTI]

    Neelis, Maarten

    2008-01-01T23:59:59.000Z

    Industry Series, Petrochemical Manufacturing: 2002. U.SProcess blocks for the production of petrochemical buildingCO 2 reduction for petrochemical products, 12/13 December,

  15. Geothermal energy employment and requirements 1977-1990

    SciTech Connect (OSTI)

    Not Available

    1981-12-01T23:59:59.000Z

    An assessment of the manpower needs of the geothermal industry is presented. The specific objectives were to: derive a base line estimate of the manpower involved in geothermal activities, determine if there is any current or impending likelihood of skill shortages, forecast future employment in the geothermal industry, conduct a technology assessment to ascertain the possibilities of some sudden breakthrough, and suggest alternatives commensurate with the findings. The methodology for fulfilling the objectives is described. Detailed results of these pursuits (objectives) are presented. Alternatives that are suggested, based upon the findings of the study, are summarized.

  16. Industrial ecology Prosperity Game{trademark}

    SciTech Connect (OSTI)

    Beck, D.; Boyack, K.; Berman, M.

    1998-03-01T23:59:59.000Z

    Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the system boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.

  17. Advanced technology options for industrial heating equipment research

    SciTech Connect (OSTI)

    Jain, R.C.

    1992-10-01T23:59:59.000Z

    This document presents a strategy for a comprehensive program plan that is applicable to the Combustion Equipment Program of the DOE Office of Industrial Technologies (the program). The program seeks to develop improved heating equipment and advanced control techniques which, by improvements in combustion and beat transfer, will increase energy-use efficiency and productivity in industrial processes and allow the preferred use of abundant, low grade and waste domestic fuels. While the plan development strategy endeavors to be consistent with the programmatic goals and policies of the office, it is primarily governed by the needs and concerns of the US heating equipment industry. The program, by nature, focuses on energy intensive industrial processes. According to the DOE Manufacturing Energy Consumption Survey (MECS), the industrial sector in the US consumed about 21 quads of energy in 1988 in the form of coal, petroleum, natural gas and electricity. This energy was used as fuels for industrial boilers and furnaces, for agricultural uses, for construction, as feedstocks for chemicals and plastics, and for steel, mining, motors, engines and other industrial use over 75 percent of this energy was consumed to provide heat and power for manufacturing industries. The largest consumers of fuel energy were the primary metals, chemical and allied products, paper and allied products, and stone, clay and glass industry groups which accounted for about 60% of the total fuel energy consumed by the US manufacturing sector.

  18. IGSHPA AnnualIGSHPA Annual Manufacturers UpdateManufacturers Update

    E-Print Network [OSTI]

    with Cooling Towers & Domestic Boilers 14 #12;Systems In The Geothermal Market New Frontier ­ The Mammoth Mech In The Geothermal Market Industry Shift ­ Larger Tonnage/Fewer Units Water-to-Water Mechanical Room 9 #12;Systems In The Geothermal Market Industry Shift ­ Larger Tonnage/Fewer Units Governair Penthouse Sherman Hospital · Mammoth

  19. Transformational Manufacturing | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    about 12 million people and generates another 7 million jobs in related businesses. Argonne is working with industry to develop innovative and transformational technology to...

  20. A feasibility study for a manufacturing technology deployment center

    SciTech Connect (OSTI)

    Not Available

    1994-10-31T23:59:59.000Z

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).