Powered by Deep Web Technologies
Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Data mining solves tough semiconductor manufacturing problems  

Science Conference Proceedings (OSTI)

Keywords: data mining, machine learning, manufacturing optimization, neural networks, pattern recognition, rule induction, self organizing maps, semiconductor yield enhancement

Mike Gardner; Jack Bieker

2000-08-01T23:59:59.000Z

2

Agriculture in an area impacted by past uranium mining activities  

SciTech Connect

The shallow aquifer near the old Cunha Baixa uranium mine (Viseu, Portugal) was contaminated by acid mine drainage. Concentration of radionuclides in water from irrigation wells and in the topsoil layer of the agriculture fields nearby display enhanced concentrations of uranium, radium and polonium. Two types of agriculture land in this area were selected, one with enhanced and another with low uranium concentrations, for controlled growth of lettuce and potatoes. Plants were grown in replicate portions of land (two plots) in each soil type and were periodically irrigated with water from wells. In each soil, one plot was irrigated with water containing low concentration of dissolved uranium and the other plot with water containing enhanced concentration of dissolved uranium. At the end of the growth season, plants were harvested and analysed, along with soil and irrigation water samples. Results show the accumulation of radionuclides in edible parts of plants, specially in the field plots with higher radionuclide concentrations in soil. Radionuclides in irrigation water contributed less to the radioactivity accumulated in plants than radionuclides from soils. (authors)

Carvalho, F. P.; Oliveira, J. M. [Instituto Tecnologico e Nuclear, Departamento de Proteccao Radiologica e Seguranca Nuclear, E.N. 10, 2686-953 Sacavem (Portugal); Neves, O.; Vicente, E. M. [Instituto Superior Tecnico Centro de Petrologia e Geoquimica, Universidade Tecnica de Lisboa, Av. Rovisco Pais 1049-001 Lisboa (Portugal); Abreu, M. M. [Dept Ciencias do Ambiente, Instituto Superior de Agronomia, Universidade Tecnica de Lisboa, Tapada da Ajuda 1399-017 Lisboa (Portugal)

2007-07-01T23:59:59.000Z

3

Review: A review of data mining applications for quality improvement in manufacturing industry  

Science Conference Proceedings (OSTI)

Many quality improvement (QI) programs including six sigma, design for six sigma, and kaizen require collection and analysis of data to solve quality problems. Due to advances in data collection systems and analysis tools, data mining (DM) has widely ... Keywords: Classification, Data mining, Data mining software, Design for six sigma, Knowledge discovery in databases, Manufacturing, Parameter optimisation, Prediction, Quality description, Quality improvement, Six sigma

Gülser Köksal; ?nci Batmaz; Murat Caner Testik

2011-09-01T23:59:59.000Z

4

Mining pixel evolutions in satellite image time series for agricultural monitoring  

Science Conference Proceedings (OSTI)

In this paper, we present a technique to help the experts in agricultural monitoring, by mining Satellite Image Time Series over cultivated areas. We use frequent sequential patterns extended to this spatiotemporal context in order to extract sets of ... Keywords: agricultural monitoring, constraints, satellite image time series, spatiotemporal patterns

Andreea Julea; Nicolas Méger; Christophe Rigotti; Emmanuel Trouvé; Philippe Bolon; Vasile L?z?rescu

2011-08-01T23:59:59.000Z

5

REQUEST BY MINNESOTA MINING & MANUFACTURING CO. (3M) FOR AN ADVANCE WAIVER OF DOMESTIC AND  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MINNESOTA MINING & MANUFACTURING MINNESOTA MINING & MANUFACTURING CO. (3M) FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN RIGHTS IN SUBJECT INVENTIONS MADE IN THE COURSE OF OR UNDER DEPARTMENT OF ENERGY CONTRACT NO. DE-AC21-96MC33089; DOE WAIVER DOCKET W(A)-96-013 [ORO-631] 3M has made a timely request for an advance waiver of worldwide rights in Subject ]Inventions made in the course of or under Department of Energy (DOE) Contract No. DE-AC21-96MC33089. The scope of work for this contract calls for the development of particle-loaded membranes for the separation of specific radionuclides or toxic species from hazardous wastes present on Government and industrial sites. The work is sponsored by the Office of the Deputy Assistant Secretary for Science and Technology, Environmental Management.

6

MANUFACTURING  

Science Conference Proceedings (OSTI)

... Energy Efficiency in Buildings: Solid State Climate Control ... TE materials is green job creation, as Table ... can provide 21,454 US jobs in manufacturing ...

2011-08-01T23:59:59.000Z

7

Manufacturing  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Energy funds the research, development, and demonstration of highly efficient and innovative manufacturing technologies. The Energy Department has supported the development...

8

Manufacturing  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Manufacturing DUF6 Health Risks line line Accidents Storage Conversion Manufacturing Disposal Transportation Manufacturing of Products Containing Depleted Uranium Discussion of risks and possible impacts associated with fabrication of representative products containing depleted uranium. Beneficial Uses Risk Evaluation The Department has initiated the Depleted Uranium Uses Research and Development Program to explore the potential beneficial uses of the depleted uranium (DU), fluorine, and empty carbon steel DUF6 storage cylinders for effective use of resources and to achieve cost savings to the government. A number of tasks have been initiated related to uses of DU as a shielding material, catalyst, and as a semi-conductor material in electronic devices. An evaluation of the risks associated with the release

9

Mining of flexible manufacturing system using work event logs and petri nets  

Science Conference Proceedings (OSTI)

One of buzzwords for modern manufacturing industry are flexible manufacturing systems (FMS), in which several machines are interlinked by an automated information and material flow system. Description and control upon these systems are of prominent significance. ...

Hesuan Hu; Zhiwu Li; Anrong Wang

2006-08-01T23:59:59.000Z

10

Innovations in Additive Manufacturing  

Science Conference Proceedings (OSTI)

Feb 16, 2010 ... Additive Manufacturing's Role in Fabrication and Repair of Aerospace Components: James Sears1; 1South Dakota School of Mines & ...

11

Energy-Related Carbon Emissions in Manufacturing  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Energy-Related Carbon Emissions Energy Energy-Related Carbon Emissions Detailed Energy-Related Carbon Emissions All Industry Groups 1994 emissions Selected Industries Petroleum refining Chemicals Iron & Steel Paper Food Stone, clay and glass Methodological Details Estimation methods Glossary Return to: Energy and GHG Analysis Efficiency Page Energy Use in Manufacturing Energy-Related Carbon Emissions in Manufacturing Manufacturing, which accounts for about 80 percent of industrial energy consumption, also accounts for about 80 percent of industrial energy-related carbon emissions. (Agriculture, mining, forestry, and fisheries account for the remaining 20 percent.) In 1994, three industries, petroleum, chemicals, and primary metals, emitted almost 60 percent of the energy-related carbon in manufacturing. The next three largest emitters (paper, food, and the stone, glass, and clay products industry) produced an additional 22 percent of the energy-related manufacturing emissions (Figure 1).

12

Uranium Mining Tax (Nebraska) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sites Power Marketing Administration Other Agencies You are here Home Savings Uranium Mining Tax (Nebraska) Uranium Mining Tax (Nebraska) Eligibility Agricultural...

13

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. 1 The manufacturing sector is composed of establishments classified in Standard Industrial Classification 20 through 39 of the U.S. economy as defined 2 by the Office of Management and Budget. The manufacturing sector is a part of the industrial sector, which also includes mining; construction; and agriculture, forestry, and fishing. The EIA also conducts energy consumption surveys in the residential, commercial buildings, and residential transportation sectors: the Residential Energy 3 Consumption Survey (RECS); the Commercial Buildings Energy Consumption Survey (CBECS); and, until recently, the Residential Transportation Energy Consumption Survey (RTECS).

14

Manufacturers use of business services  

SciTech Connect

This paper summarized findings from a Colorado and Utah survey of manufacturing and business service establishments which provided information on the use of business services among different types of firms in this interior region of the United States. The paper provides information which helps to shed light on various areas of inquiry on the relationship between manufacturers and producer services, but certainly calls for additional investigation. Most of the findings are consistent with those found by studies in other areas. Manufacturers are not a major source of sales for business service firms and the availability of business services is not cited as an important location consideration for manufacturers. Given the strong mining and agricultural sectors in these states, the fact that so little trade was with the primary sector may have been surprising. However, most of the responses in the surveys were from the urban areas of Denver and Salt Lake City. One of the hypotheses in the literature, as defined by Perry and Goe, concerns whether the growth in business services and the decline in manufacturing employment is a result of the trend toward the use of contracted services by manufacturers. The aggregate results of the study do not provide much evidence to support the proposition that this occurs. However, the results show that the larger firms internalize certain specialized business services more so than the smaller firms. The greater use company-provided legal services by the larger manufacturers is a case in point. This finding is consistent with Scott`s finding in the printed circuits industry in which larger establishments provided more functions internally than did the smaller establishments. In the case of engineering, architectural, and business management services it appears that many smaller manufacturers do not use such services at all, but that the larger establishments have more needs for professional services.

Calzonetti, F. [West Virginia Univ., Morgantown, WV (United States); Allison, T. [Argonne National Lab., IL (United States)

1992-12-31T23:59:59.000Z

15

Land reclamation beautifies coal mines  

Science Conference Proceedings (OSTI)

The article explains how the Mississippi Agricultural and Forestry Experiments station, MAFES, has helped prepare land exploited by strip mining at North American Coal Corporation's Red Hills Mine. The 5,800 acre lignite mine is over 200 ft deep and uncovers six layers of coal. About 100 acres of land a year is mined and reclaimed, mostly as pine plantations. 5 photos.

Coblentz, B. [MSU Ag Communications (United States)

2009-07-15T23:59:59.000Z

16

IMPROVEMENT OF WEAR COMPONENT'S PERFORMANCE BY UTILIZING ADVANCED MATERIALS AND NEW MANUFACTURING TECHNOLOGIES: CASTCON PROCESS FOR MINING APPLICATIONS  

Science Conference Proceedings (OSTI)

The project has seen quite a bit of activity in this quarter, highlighted by the fabrication of a bit insert for field testing. In addition: (1) Several alternative process techniques were attempted to prevent bloating, cracking and delamination of FM material that occurs during binder burnout. The approaches included fabrication of FM material by three pass extrusion and warm isostatic pressing of green material, slow and confined burnouts as well as, burnout of thin plate instead of rod stock. Happily, a confined burnout followed by HIPing, produced FM button inserts without bloating or delamination. (2) Four rock bit inserts were produced from FM material and are ready for use on blast hole bits in the field. (3) Six of the project participants from Michigan Technological University, Advanced Ceramic Manufacturing, and The Robbins Group visited the Superior Rock Bit Company in Minnesota and planned the field test of FM inserts.

Xiaodi Huang; Richard Gertsch

2002-08-27T23:59:59.000Z

17

The NIST Manufacturing Extension Partnership: Improving the ...  

Science Conference Proceedings (OSTI)

... his Report on Manufactures, the United States was an agricultural economy ... In 1867, when agriculture was the mainstay of the US economy, federal ...

2010-10-05T23:59:59.000Z

18

ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry: Chapter 3: Potash, Soda Ash, and Borates  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Potash, Potash, Soda Ash, and Borates 3 Potash, soda ash and borates are industrial minerals. They are used primary as feedstock for other industries. They are used to make fertilizers, glass, chemicals and other materials used throughout manufacturing industries. For example, the agricultural industry relies heavily on potash and borates as fertilizers. It is the dependence of these manufacturing industries that make industrial minerals so important. Forms of Potash Potash is used primarily as an agricultural fertilizer because it is a source for soluble potassium. Potash denotes a variety of mined and manufactured salts, all containing the element potassium in water-soluble form. Potash can be potassium chloride [KCL, or muriate of potash (MOP)], potassium sulfate [K

19

Solar Manufacturing Incentive Grant (SMIG) Program  

Energy.gov (U.S. Department of Energy (DOE))

Created in 1995 and administered jointly by the Virginia Department of Mines, Minerals and Energy, and the Virginia Economic Development Partnership, the Solar Manufacturing Incentive Grant (SMIG)...

20

Coal mining technology, economics and policy - 1986  

SciTech Connect

This book presents the papers given at a conference on coal mining. Topics considered at the conference included coal preparation, communications, environmental controls, current regulatory issues regarding ground subsidence with longwall mining, personnel management, equipment manufacturers, engineers, contractors, safety and health aspects of mine emergency planning, surface mining operations, coal transport, underground face operations, and underground service operators.

Not Available

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Department of Agricultural and Resource EconomicsDetermining the Impact of Retailer Store Brand Procurement on Vertical Relationships with Brand Manufacturers and on Market Equilibrium †  

E-Print Network (OSTI)

This paper investigates how a retailer’s store brand supply source impacts vertical pricing and supply channel profitability. Using chain-level retail scanner data from major supermarkets in Boston prior to the leading retailer’s divestiture of its store brand milk processing to a major brand manufacturer I estimate a random coefficients logit demand model employing a Bayesian estimation approach. Bayesian decision theory is applied to select from a set of pricing games the one most likely for the data sample analyzed. Results from this analysis indicate that the empirically valid model has the pre-divested retailer integrated into the processing of its own milk and takes as given the wholesale price of brand milks while competing retailers have nonlinear pricing contracts with brand manufacturers who produce their store brands. This model is matched against a series of counterfactual simulations as a baseline. The counterfactual simulations consider the eventual divestiture of store brand milk processing by the leading retailer

Michael A. Cohen; Michael A. Cohen

2010-01-01T23:59:59.000Z

22

European coal mining technology  

SciTech Connect

Most new developments in mechanized longwall coal technology have been pioneered by European mines and equipment manufacturers. But ironically, the most successful adaptations of European-inspired longwalling systems have occurred in North America, Australia, South Africa and elsewhere, enabling those mines to achieve even greater productivity and cost-effective utilization than the Europeans enjoy. This anomaly has little to do with mining talents, but arises instead from a pair of factors: 1) the extremely difficult mining and geological conditions of European coal basins; and 2) the profound differences between the management style and operating routines of the largely state-owned mines of Europe and the privately-owned, profit oriented mining companies abroad. Nevertheless, Europe continues to lead the way in new developments, driven by the chemistry of tough mining conditions and the commitments of its national mining industries to invest in new technology. As a third ingredient, the supra-national European Economic Community (EEC) plays an important role in promoting and funding new developments through its various agencies. A recent EEC information symposium on new methods of coal winning at Luxembourg focused on state-of-the-art longwall technology. Thus a look at current Euopean RandD programs yields pointers as to what the international coal industry may expect in the future.

Wyllie, B.

1986-06-01T23:59:59.000Z

23

Longwall mining  

SciTech Connect

As part of EIA`s program to provide information on coal, this report, Longwall-Mining, describes longwall mining and compares it with other underground mining methods. Using data from EIA and private sector surveys, the report describes major changes in the geologic, technological, and operating characteristics of longwall mining over the past decade. Most important, the report shows how these changes led to dramatic improvements in longwall mining productivity. For readers interested in the history of longwall mining and greater detail on recent developments affecting longwall mining, the report includes a bibliography.

NONE

1995-03-14T23:59:59.000Z

24

About Manufacturing  

Science Conference Proceedings (OSTI)

... reflects the changes in prices that manufacturers ... Petroleum Electricity Natural Gas Coal Emissions ... Position Abroad on a Historical Cost Basis ...

2013-07-25T23:59:59.000Z

25

Manufacturing Portal  

Science Conference Proceedings (OSTI)

... datasets. Manufacturers of … more. In Situ Characterization of Nanoscale Gas-Solid Interactions by TEM Observing and ...

2013-09-09T23:59:59.000Z

26

Manufacturing News  

Science Conference Proceedings (OSTI)

... Two New MEP Centers Will Serve Kentucky and South Dakota Manufacturers Release Date: 01/24/2013 Small and mid ...

2010-09-22T23:59:59.000Z

27

Green Manufacturing Portal  

Science Conference Proceedings (OSTI)

NIST Home > Green Manufacturing Portal. Green Manufacturing Portal. ... see all Green Manufacturing programs and projects ... ...

2012-12-27T23:59:59.000Z

28

Green Manufacturing Events  

Science Conference Proceedings (OSTI)

NIST Home > Green Manufacturing Events. Green Manufacturing Events. (showing 1 - 1 of 1). Manufacturing Innovations ...

2011-06-20T23:59:59.000Z

29

Manufacturing Energy Portal  

Science Conference Proceedings (OSTI)

NIST Home > Manufacturing Energy Portal. Manufacturing Energy Portal. ... see all Manufacturing Energy programs and projects ... ...

2013-11-07T23:59:59.000Z

30

The Silicon Mine | Open Energy Information  

Open Energy Info (EERE)

Mine Mine Jump to: navigation, search Name The Silicon Mine Place Netherlands Sector Solar Product The Silicon Mine (TSM) will produce solar grade polysilicon suitable for the production of wafers or as the base material for the manufacture of solar cells. References The Silicon Mine[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. The Silicon Mine is a company located in Netherlands . References ↑ "The Silicon Mine" Retrieved from "http://en.openei.org/w/index.php?title=The_Silicon_Mine&oldid=352196" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties

31

Manufacturing News  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

news Office of Energy Efficiency & news Office of Energy Efficiency & Renewable Energy Forrestal Building 1000 Independence Avenue, SW Washington, DC 20585 en FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute http://energy.gov/articles/factsheet-next-generation-power-electronics-manufacturing-innovation-institute manufacturing-innovation-institute" class="title-link">FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute

32

Manufacturing Growth  

Science Conference Proceedings (OSTI)

... report, even the lithium-ion batteries used in Chevy's much anticipated electric car, the Volt, are supplied by South Korean battery manufacturer LG ...

2013-07-31T23:59:59.000Z

33

Advanced Manufacturing  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Energy funds the research, development, and demonstration of highly efficient and innovative manufacturing technologies. The Energy Department has supported the development...

34

Mining (Montana)  

Energy.gov (U.S. Department of Energy (DOE))

This section provides general rules and regulations pertaining to mining practices in the state of Montana. It addresses mining locations and claims, procedures for rights-of-way and eminent domain...

35

Manufacturing Extension Partnership, Manufacturing Data and ...  

Science Conference Proceedings (OSTI)

... Manufacturing Data & Trends. Manufacturing is a dynamic and changing industry. In this ... Voytek. DATA RESOURCES. Capacity ...

2013-06-17T23:59:59.000Z

36

Development Mining  

E-Print Network (OSTI)

This report, twenty-eighth of an annual series, describes mineral, oil and gas, and geothermal activities and accomplishments in Nevada in 2006: production statistics, exploration and development including drilling for petroleum and geothermal resources, discoveries of orebodies, new mines opened, and expansion and other activities of existing mines. Statistics of known gold and silver deposits, and directories of mines

Mark Alden; Stavros Anthony; Cedric Crear; Thalia M. Dondero; Dorothy Sewell Gallagher; Jason Geddes; Ron Knecht; James D. Leavitt; Howard Rosenberg; Jack L. Schofield; Steve Sisolak; James E. Rogers; Milton D. Glick; Jeffrey Thompson; Interim Dean; James V. Taranik

2006-01-01T23:59:59.000Z

37

Manufacturing technologies  

SciTech Connect

The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

NONE

1995-09-01T23:59:59.000Z

38

Manufacturing technology  

SciTech Connect

The specific goals of the Manufacturing Technology thrust area are to develop an understanding of fundamental fabrication processes, to construct general purpose process models that will have wide applicability, to document our findings and models in journals, to transfer technology to LLNL programs, industry, and colleagues, and to develop continuing relationships with industrial and academic communities to advance our collective understanding of fabrication processes. Advances in four projects are described here, namely Design of a Precision Saw for Manufacturing, Deposition of Boron Nitride Films via PVD, Manufacturing and Coating by Kinetic Energy Metallization, and Magnet Design and Application.

Blaedel, K.L.

1997-02-01T23:59:59.000Z

39

The UF Department of Agricultural and Biological Engineering, in partnership with Fachhochschule  

E-Print Network (OSTI)

, a coal mine, a fort and other locations HIGHLIGHTS Eligibility: Undergraduate students. - Undergraduate coal mine and tour an electric power plant Tour GM-Hütte, a steel manufacturing industry Visit

Watson, Craig A.

40

Surface Coal Mining and Reclamation (Indiana) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Surface Coal Mining and Reclamation (Indiana) Surface Coal Mining and Reclamation (Indiana) Surface Coal Mining and Reclamation (Indiana) < Back Eligibility Agricultural Commercial Fed. Government Industrial Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Rural Electric Cooperative State/Provincial Govt Tribal Government Utility Program Info State Indiana Program Type Environmental Regulations Provider Department of Natural Resources The Indiana Department of Natural Resources implements and enforces the federal Surface Mining Control and Reclamation Act of 1977, as well as a statewide program to protect society and the environment from the adverse effects of mining operations, and regulates coal mining operations to

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Precision Mining  

NLE Websites -- All DOE Office Websites (Extended Search)

Precision Mining Precision Mining Double Beta Decay Dark Matter Biology Repository Science Renewable Energy Precision Mining at WIPP is Routine All tunnels that make up the WIPP underground are mined with the same precision that is exhibited in this photo. Typical drift cross sections are about 8m x 4m. Custom excavation and maintenance of openings of any configuration can be made. In 2005, WIPP completed renovations to the 6,000 cubic meter North Experimental Area (NExA). The area, located at the northern end of the mine, was refurbished through rib trimming, floor grading, removal of loose muck, ground support and restoration of basic lighting and mine communications. As of 2010, the NExA is used for the Enriched Xenon Observatory (EXO), the Dark Matter Time Projection Chamber (DMTPC)

42

PNNL: Available Technologies: Agriculture & Mining Industry  

Bio-based. Bio-based. Conversion of Levulinic Acid to Methyl Tetrahydrofuran; Building Efficiency. DSOM (Decision Support for Operations and ...

43

Advanced Manufacturing Office: News  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Office: News on Twitter Bookmark Advanced Manufacturing Office: News on Google Bookmark Advanced Manufacturing Office: News on Delicious Rank Advanced Manufacturing...

44

Manufacturing Extension Partnership Homepage  

Science Conference Proceedings (OSTI)

... The Manufacturing Extension Partnership (MEP) is a catalyst for strengthening American manufacturing – accelerating its ongoing transformation ...

2013-08-23T23:59:59.000Z

45

Manufacturing Perspective  

NLE Websites -- All DOE Office Websites (Extended Search)

EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 BOEING is a trademark of Boeing Management Company. Copyright © 2009 Boeing. All rights reserved. Compressed Hydrogen Storage Workshop Manufacturing Perspective Karl M. Nelson (karl.m.nelson@boeing.com) Boeing Research & Technology Engineering, Operations & Technology | Boeing Research & Technology Materials & Fabrication Technology EOT_RT_Sub_Template.ppt | 1/12/2009 | Structural Tech 2 Copyright © 2009 Boeing. All rights reserved. DOE Hydrogen Program Development of Advanced Manufacturing Technologies for Low Cost Hydrogen Storage Vessels Mark Leavitt, Alex Ly Quantum Fuel Systems Technologies Worldwide Inc. Karl Nelson, Brice Johnson The Boeing Company Ken Johnson, Kyle Alvine, Stan Pitman, Michael Dahl, Daryl Brown

46

Manufacturing technology  

SciTech Connect

This bulletin depicts current research on manufacturing technology at Sandia laboratories. An automated, adaptive process removes grit overspray from jet engine turbine blades. Advanced electronic ceramics are chemically prepared from solution for use in high- voltage varistors. Selective laser sintering automates wax casting pattern fabrication. Numerical modeling improves performance of photoresist stripper (simulation on Cray supercomputer reveals path to uniform plasma). And mathematical models help make dream of low- cost ceramic composites come true.

Leonard, J.A.; Floyd, H.L.; Goetsch, B.; Doran, L. [eds.

1993-08-01T23:59:59.000Z

47

Flue Gas Desulfurization Gypsum Agricultural Network  

Science Conference Proceedings (OSTI)

Flue gas desulfurization (FGD) gypsum is a solid produced by wet FGD systems with forced air oxidation and is chemically similar to mined gypsum. These gypsums, used as beneficial agricultural amendments, were evaluated for their effects on earthworm populations and trace element concentrations in soils and earthworms at four field sites (Ohio, Indiana, Alabama, and Wisconsin). These sites are part of a network study on agricultural uses of FGD gypsum conducted at sites across the United States. ...

2012-09-19T23:59:59.000Z

48

Mines and Mining (Maryland) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mines and Mining (Maryland) Mines and Mining (Maryland) Mines and Mining (Maryland) < Back Eligibility Commercial Construction Fed. Government Industrial Institutional Investor-Owned Utility Local Government Municipal/Public Utility Retail Supplier Rural Electric Cooperative Systems Integrator Tribal Government Utility Program Info State Maryland Program Type Safety and Operational Guidelines Siting and Permitting Provider Maryland Department of the Environment It is the policy of the state to encourage the development of mined resources in Maryland while protecting the environment and public health and safety. This legislation establishes the Bureau of Mines within the Department of the Environment and provides for the establishment of rules and regulations governing mining activity. The legislation addresses the

49

Agriculture Information at NIST  

Science Conference Proceedings (OSTI)

NIST Home > Agriculture Information at NIST. Agriculture Information at NIST. CCQM BAWG - P113, Relative Quantification ...

2010-09-23T23:59:59.000Z

50

Methods to Manufacture Cermets  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacture Cermets Methods to Manufacture Cermets There are many methods to manufacture cermets. One option is shown here. DU dioxide and steel powder are mixed, the mixture is...

51

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Advanced Manufacturing Trades Training Program Business Program Lead Yvonne Baros Advanced Manufacturing Trades Training Program Tom Souther Advanced Technology Academy...

52

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Skills Standards The Academic and Employability Skills Standards align Sandia's training efforts in advanced manufacturing with the recommendations of the Manufacturing Skill...

53

Manufacturing Glossary  

Gasoline and Diesel Fuel Update (EIA)

Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Home > Energy Users > Energy Efficiency Page > Glossary for the Manufacturing Sector Glossary For the Manufacturing Sector Barrel: A volumetric unit of measure equivalent to 42 U.S. gallons. Biomass: Organic nonfossil material of biological origin constituting a renewable energy source. Blast Furnace: A shaft furnace in which solid fuel (coke) is burned with an air blast to smelt ore in a continuous operation. Blast Furnace Gas: The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to metallic iron. It is commonly used as a fuel within the steel works. Boiler Fuel: An energy source to produce heat that is transferred to the boiler vessel in order to generate steam or hot water. Fossil fuels are the primary energy sources used to produce heat for boilers.

54

Data Mining Portal  

Science Conference Proceedings (OSTI)

NIST Home > Data Mining Portal. Data Mining Portal. Programs and Projects. Data Science Symposium 2013 ... Data Science ...

2012-12-27T23:59:59.000Z

55

The Agricultural Greenhouse Gas Research and Development Platform  

E-Print Network (OSTI)

The Agricultural Greenhouse Gas Research and Development Platform 2010 -2015 Accounting Building/Data Mining · Aim: improve the UK's greenhouse gas inventory by replacing generic IPCCC emission inventory #12;Agricultural Greenhouse Gas Research Platform ­ missing data #12;AC0115 ­ led by IBERS

Edinburgh, University of

56

Mining engineering analysis  

SciTech Connect

An attempt is made to fill the gap between theory and application in mining engineering. The book is based on SME Mining Engineering Handbook and the Coal Mining Technology - Theory and Practice. Each chapter deals with the theory and then presents problems of applications and the solutions to them. Topics considered include underground mining, surface mining, geophysics, mining equipment, and rock mechanics.

Bise, C.J.

1986-01-01T23:59:59.000Z

57

Materials Processing & Manufacturing Division  

Science Conference Proceedings (OSTI)

In its broadest scope, the Materials Processing & Manufacturing Division (MPMD) covers manufacturing from product design to production, integrating process ...

58

Advanced Manufacturing Office: Solicitations  

NLE Websites -- All DOE Office Websites (Extended Search)

Solicitations on Twitter Bookmark Advanced Manufacturing Office: Solicitations on Google Bookmark Advanced Manufacturing Office: Solicitations on Delicious Rank Advanced...

59

Advanced Manufacturing Office: Webcasts  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Webcasts on Twitter Bookmark Advanced Manufacturing Office: Webcasts on Google Bookmark Advanced Manufacturing Office: Webcasts on Delicious Rank Advanced...

60

Advanced Manufacturing Office: Subscribe  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Subscribe on Twitter Bookmark Advanced Manufacturing Office: Subscribe on Google Bookmark Advanced Manufacturing Office: Subscribe on Delicious Rank Advanced...

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Advanced Manufacturing Office: Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: Workshops on Twitter Bookmark Advanced Manufacturing Office: Workshops on Google Bookmark Advanced Manufacturing Office: Workshops on Delicious Rank Advanced...

62

Additive Manufacturing - TMS  

Science Conference Proceedings (OSTI)

WEB RESOURCES: Research Groups for the Additive Manufacturing of Superalloys Compilation of groups involved in additive manufacturing, 0, 1118, Lynette ...

63

2010 Georgia Manufacturing Survey  

Science Conference Proceedings (OSTI)

... Linked to Innovation Manufacturing Wages by Percentages of Respondents ... Manufacturing Strategies by Industry Group (Percentage of firms ...

2013-07-31T23:59:59.000Z

64

Agricultural Microscopy Division Of Interest  

Science Conference Proceedings (OSTI)

Agricultural Microscopy, Reports, Journals, Websites Agricultural Microscopy Division Of Interest Agricultural Microscopy agri-food sector agricultural Agricultural Microscopy analytical aocs articles biotechnology courses detergents division divisions f

65

Data mining  

Science Conference Proceedings (OSTI)

This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The objective of this project was to develop and implement data mining technology suited to the analysis of large collections of unstructured data. This has taken the form of a software tool, PADMA (Parallel Data Mining Agents), which incorporates parallel data accessing, parallel scalable hierarchical clustering algorithms, and a web-based user interface for submitting Structured Query Language (SQL) queries and interactive data visualization. The authors have demonstrated the viability and scalability of PADMA by applying it to an unstructured text database of 25,000 documents running on an IBM SP2 at Argonne National Laboratory. The utility of PADMA for discovering patterns in data has also been demonstrated by applying it to laboratory test data for Hepatitis C patients and autopsy reports in collaboration with the University of New Mexico School of Medicine.

Lee, K.; Kargupta, H.; Stafford, B.G.; Buescher, K.L.; Ravindran, B.

1998-12-31T23:59:59.000Z

66

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

precision machining technology, automated machining and manufacturing technology, welding, photonics technology, microelectromechanical systems (MEMS), and testing and...

67

Barron Electric Cooperative - Commercial, Industrial, and Agricultural  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Barron Electric Cooperative - Commercial, Industrial, and Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program < Back Eligibility Agricultural Commercial Industrial Savings Category Other Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Commercial Lighting Lighting Manufacturing Maximum Rebate $10,000 per account, not to exceed 20% of cost Scroll Refrigeration Compressors: $500 Variable Speed/Frequency Drive Motor: $500 Variable Speed Compressed Air Motor: $500 Energy Audit: One in Five Years Program Info State Wisconsin Program Type Utility Rebate Program Rebate Amount Energy Audit: Free General Lighting: $1 - $15/unit LED Lamps: $2/bulb

68

The President's Manufacturing Initiative  

NLE Websites -- All DOE Office Websites (Extended Search)

The President's The President's Manufacturing Initiative Manufacturing Initiative Roadmap Workshop on Roadmap Workshop on Manufacturing R&D for Manufacturing R&D for the Hydrogen Economy the Hydrogen Economy Washington, D.C. Washington, D.C. July 13, 2005 July 13, 2005 Dale Hall Dale Hall Acting Chair, Interagency Working Group on Acting Chair, Interagency Working Group on Manufacturing Research and Development Manufacturing Research and Development National Science and Technology Council National Science and Technology Council and and Director, Manufacturing Engineering Laboratory Director, Manufacturing Engineering Laboratory National Institute of Standards and Technology National Institute of Standards and Technology U.S. Department of Commerce U.S. Department of Commerce

69

Manufacturing Day 2012  

Science Conference Proceedings (OSTI)

... City, I had the opportunity to visit GAL Manufacturing Corp., an elevator parts manufacturer in the Bronx, right down the road from Yankee Stadium. ...

2013-02-28T23:59:59.000Z

70

Microelectronics Manufacturing Infrastructure  

Science Conference Proceedings (OSTI)

... But the manufacturing infrastructure is aging. ... to create an integrated infrastructure for manufacturing ... will enhance the value and utility of portable ...

2011-10-19T23:59:59.000Z

71

Benton PUD - Commercial and Agricultural Energy Efficiency Rebate Programs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial and Agricultural Energy Efficiency Rebate Commercial and Agricultural Energy Efficiency Rebate Programs Benton PUD - Commercial and Agricultural Energy Efficiency Rebate Programs < Back Eligibility Agricultural Commercial Savings Category Other Manufacturing Appliances & Electronics Commercial Lighting Lighting Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Custom Projects: Varies widely, no predetermined amount Agriculture: Varies widely, no predetermined amount Commercial Lighting: Not specified Provider Benton PUD Benton PUD offers a variety of incentives to non-residential customers for energy efficiency improvements. Projects are available for commercial customers interested in energy efficient lighting and custom projects that improve efficiency or process related systems such as compressed air,

72

Linn County Rural Electric Cooperative - Agricultural Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Linn County Rural Electric Cooperative - Agricultural Energy Linn County Rural Electric Cooperative - Agricultural Energy Efficiency Rebate Program Linn County Rural Electric Cooperative - Agricultural Energy Efficiency Rebate Program < Back Eligibility Agricultural Savings Category Other Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Home Weatherization Construction Commercial Weatherization Design & Remodeling Heat Pumps Heating Commercial Lighting Lighting Manufacturing Water Heating Maximum Rebate 50% of installed costs Geothermal Heat Pumps: 20 tons General: See equipment brochure for specific technology incentive caps Program Info State Iowa Program Type Utility Rebate Program Rebate Amount Indoor Agricultural Lighting: Varies; see program web site Dairy/Livestock: Varies

73

Locating Chicago Manufacturing  

E-Print Network (OSTI)

and engineering.3 The Chicago Manufacturing Renaissance Council itself is a unique public-private partnership

Illinois at Chicago, University of

74

Topic: Sustainable Manufacturing  

Science Conference Proceedings (OSTI)

... Project. Sustainable Manufacturing Program. Sustainability Characterization for Product Assembly Processes Project. Testbed ...

2012-09-19T23:59:59.000Z

75

Manufacturing Simulation Portal  

Science Conference Proceedings (OSTI)

... in planning by robots in scenarios relevant to … more. ... SUSTAINABLE MANUFACTURING PROCESS ANALYSIS APPLICATIONS DEVELOPMENT. ...

2012-12-27T23:59:59.000Z

76

Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Science & Innovation » Energy Efficiency » Manufacturing Science & Innovation » Energy Efficiency » Manufacturing Manufacturing Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. Manufacturing is the lifeblood of the American economy -- providing jobs for hard working American families and helping increase U.S. competitiveness in the global marketplace. The Energy Department is committed to growing America's manufacturing industry by helping companies become leaders in the production of clean energy technologies like electric vehicles, LED bulbs and solar panels. The

77

Heliostat manufacturing analysis  

DOE Green Energy (OSTI)

Results of a manufacturing cost analysis of heliostats are presented. The two primary objectives are: (1) providing a base for uniform cost analysis, and (2) providing facility and manufacturing cost estimates for planning purposes in the development of a heliostat industry. The manufacturing analysis provides materials, labor, equipment, and facility costs for each step in the manufacturing process. Detailed procedures are presented for cost estimates. These include estimating worksheets for each component of the manufacturing costs.

Drumheller, K.

1978-10-01T23:59:59.000Z

78

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Recognition Awards The AMTTP won Sandia's Silver President's Quality Award and the Manufacturing Science and Technology Center's Gold Recognition and Team Award. Letters of...

79

Advanced Manufacturing Office: Advanced Manufacturing Partnership  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

R&D projects, supporting manufacturing infrastructure, and facilitating job creation. These actions save energy and provide benefits to U.S. industry and the national...

80

Manufacturing Science and Technology: Advanced Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

MEST & SIT Skills Standard Technical Institute Partners Training Areas Program Recognition Partners Contacts News Articles Advanced Manufacturing Trades Training Program (AMTTP)...

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Short Course Agricultural Microscopy  

Science Conference Proceedings (OSTI)

Short Course in Agricultural Microscopy. Fargo North Dakota held June 13-16 2011. Sponsored by the Agricultural Microscopy Division of AOCS and the Great Plains Institute of Food Safety. Short Course Agricultural Microscopy Short Courses ...

82

XsunX Inc formerly Sun River Mining Inc | Open Energy Information  

Open Energy Info (EERE)

XsunX Inc formerly Sun River Mining Inc XsunX Inc formerly Sun River Mining Inc Jump to: navigation, search Name XsunX Inc (formerly Sun River Mining Inc) Place Aliso Viejo, California Zip 92656 Product US-based manufacturer of thin-film PV cells and its manufacturing equipment. References XsunX Inc (formerly Sun River Mining Inc)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. XsunX Inc (formerly Sun River Mining Inc) is a company located in Aliso Viejo, California . References ↑ "[ XsunX Inc (formerly Sun River Mining Inc)]" Retrieved from "http://en.openei.org/w/index.php?title=XsunX_Inc_formerly_Sun_River_Mining_Inc&oldid=353287" Categories: Clean Energy Organizations Companies

83

Mining Engineering Strategic Plan  

E-Print Network (OSTI)

, coal, base and ferrous metals. Action 1.3.2: The Tianfu Mining University Opportunity: Strengthen.1.2: Endowed Chair in Energy: Endow a $3 million Chair in Mining Engineering with emphasis on Energy form Coal Control, Mineral-Materials-Coal Processing, Mine Health and Safety, and Mine Survey laboratories. Action 4

Ragsdell, Kenneth M.

84

Agricultural Improvement Loan Program  

Energy.gov (U.S. Department of Energy (DOE))

The Agricultural Improvement Loan Program is administered by the Minnesota Department of Agriculture through the Minnesota Rural Finance Authority (RFA) and provides loans to farmers for...

85

Agricultural Industrial Relations Bibliography  

E-Print Network (OSTI)

Relations Act: Report. Sacramento, CA: Office of the AuditorLabor Relations Law. Sacramento, CA: California Agricultural1975-76 and 1976-77. Sacramento, CA: California Agricultural

Brown, Cheryl L.; Dote, Grace; Edmonds, Christopher M.; Perloff, Jeffrey M.; Rosenberg, Howard R.; Xiong, Nanyan

1991-01-01T23:59:59.000Z

86

Rights and Duties of Mines and Mine Owners, General (Missouri)  

Energy.gov (U.S. Department of Energy (DOE))

This legislation addresses general operational guidelines for mine owners regarding public notices, fees, land and mineral ownership, requirements for mining in certain municipalities, and mining...

87

Blade Manufacturing Improvement: Remote Blade Manufacturing Demonstration  

DOE Green Energy (OSTI)

The objective of this program was to investigate manufacturing improvements for wind turbine blades. The program included a series of test activities to evaluate the strength, deflection, performance, and loading characteristics of the prototype blades. The original contract was extended in order to continue development of several key blade technologies identified in the project. The objective of the remote build task was to demonstrate the concept of manufacturing wind turbine blades at a temporary manufacturing facility in a rural environment. TPI Composites successfully completed a remote manufacturing demonstration in which four blades were fabricated. The remote demonstration used a manufacturing approach which relied upon material ''kits'' that were organized in the factory and shipped to the site. Manufacturing blades at the wind plant site presents serious logistics difficulties and does not appear to be the best approach. A better method appears to be regional manufacturing facilities, which will eliminate most of the transportation cost, without incurring the logistical problems associated with fabrication directly onsite. With this approach the remote facilities would use commonly available industrial infrastructure such as enclosed workbays, overhead cranes, and paved staging areas. Additional fatigue testing of the M20 root stud design was completed with good results. This design provides adhesive bond strength under fatigue loading that exceeds that of the fastener. A new thru-stud bonding concept was developed for the M30 stud design. This approach offers several manufacturing advantages; however, the test results were inconclusive.

ASHWILL, THOMAS D.

2003-05-01T23:59:59.000Z

88

Blade Manufacturing Improvement: Remote Blade Manufacturing Demonstration  

SciTech Connect

The objective of this program was to investigate manufacturing improvements for wind turbine blades. The program included a series of test activities to evaluate the strength, deflection, performance, and loading characteristics of the prototype blades. The original contract was extended in order to continue development of several key blade technologies identified in the project. The objective of the remote build task was to demonstrate the concept of manufacturing wind turbine blades at a temporary manufacturing facility in a rural environment. TPI Composites successfully completed a remote manufacturing demonstration in which four blades were fabricated. The remote demonstration used a manufacturing approach which relied upon material ''kits'' that were organized in the factory and shipped to the site. Manufacturing blades at the wind plant site presents serious logistics difficulties and does not appear to be the best approach. A better method appears to be regional manufacturing facilities, which will eliminate most of the transportation cost, without incurring the logistical problems associated with fabrication directly onsite. With this approach the remote facilities would use commonly available industrial infrastructure such as enclosed workbays, overhead cranes, and paved staging areas. Additional fatigue testing of the M20 root stud design was completed with good results. This design provides adhesive bond strength under fatigue loading that exceeds that of the fastener. A new thru-stud bonding concept was developed for the M30 stud design. This approach offers several manufacturing advantages; however, the test results were inconclusive.

ASHWILL, THOMAS D.

2003-05-01T23:59:59.000Z

89

Soap Manufacturing Technology  

Science Conference Proceedings (OSTI)

Soap producers as well as anyone with an interest in soap technology will benefit from the new AOCS Press Soap Manufacturing Technology book. Soap Manufacturing Technology Surfactants and Detergents aocs articles Detergents division divisions fabric

90

Energy Use in Manufacturing  

Reports and Publications (EIA)

This report addresses both manufacturing energy consumption and characteristics of the manufacturing economy related to energy consumption. In addition, special sections on fuel switching capacity and energy-management activities between 1998 and 2002 are also featured in this report.

William Gifford

2006-08-14T23:59:59.000Z

91

Green Manufacturing News  

Science Conference Proceedings (OSTI)

... New MEP Advisory Board White Paper Assesses the Present and Future of American Manufacturing Release Date: 04/13/2010 ...

2010-10-27T23:59:59.000Z

92

Technology Development and Manufacturing ...  

Science Conference Proceedings (OSTI)

... Manufacturing Tax Credits; Loan Guarantees – Renewable Energy • FY 11 Budget- Univ. ... Products China Philippines Czech Republic 25 30 35 ...

2013-06-11T23:59:59.000Z

93

Sustainable Manufacturing Briefing  

Science Conference Proceedings (OSTI)

... enhance their brands. • Is sustainability an opportunity or cost? There is no ... demonstrate, deploy, and accredit new sustainable manufacturing ...

2012-08-29T23:59:59.000Z

94

Manufacturing Extension Partnership  

Science Conference Proceedings (OSTI)

... research and development programs with manufacturing and military applications including robotic deburring, automated lay up of thermoplastic ...

2009-08-25T23:59:59.000Z

95

Manufacturing Modeling and Simulation  

Science Conference Proceedings (OSTI)

... An integrated data model for manufacturing activities will be defined ... Measurement science techniques, including classic statistics, will be applied ...

2013-01-04T23:59:59.000Z

96

Testimonials from Manufacturing  

Science Conference Proceedings (OSTI)

... The economic environment is difficult for Cargill Corn Milling, as it is difficult for many manufacturing companies today. ...

2013-01-30T23:59:59.000Z

97

NPDES Rule for Coal Mining Facilities (West Virginia) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NPDES Rule for Coal Mining Facilities (West Virginia) NPDES Rule for Coal Mining Facilities (West Virginia) NPDES Rule for Coal Mining Facilities (West Virginia) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Program Info State West Virginia Program Type Siting and Permitting Provider Department of Environmental Protection This rule establishes requirements implementing the powers, duties, and responsibilities of State's Water Pollution Control Act with respect to all

98

Surface Coal Mining Law (Missouri) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Surface Coal Mining Law (Missouri) Surface Coal Mining Law (Missouri) Surface Coal Mining Law (Missouri) < Back Eligibility Commercial Construction Industrial Institutional Investor-Owned Utility Local Government Municipal/Public Utility Rural Electric Cooperative Tribal Government Utility Program Info State Missouri Program Type Environmental Regulations Provider Missouri Department of Natural Resources This law aims to provide for the regulation of coal mining in order to minimize or prevent its adverse effects, protect the environment to the extent possible, protect landowner rights, and prohibit coal mining in locations where reclamation is not feasible. The law aims to strike a balance between protection of the environment and agricultural productivity and the need for coal as an energy source. This law addresses the powers of

99

Water Management Plans for Surface Coal Mining Operations (North Dakota) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Management Plans for Surface Coal Mining Operations (North Management Plans for Surface Coal Mining Operations (North Dakota) Water Management Plans for Surface Coal Mining Operations (North Dakota) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Program Info State North Dakota Program Type Siting and Permitting A water management plan is required for all surface coal mining operations. This plan must be submitted to the State Engineer of the State Water Commission at the same time a surface mining permit is submitted to the

100

Extracting performance rules of suppliers in the manufacturing industry: an empirical study  

Science Conference Proceedings (OSTI)

Performance evaluation of suppliers is increasingly recognized as a critical indicator in supply chain cooperation. Traditional performance evaluation methods have the problems of a simple buy/sell relation and in one's subjective views between manufacturers ... Keywords: Data mining techniques, KPI (Key Performance Indicators), Manufacturing industry, Performance evaluation, SCM (Supply Chain Management)

You-Shyang Chen; Ching-Hsue Cheng; Chien-Jung Lai

2012-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Data Mining: Opportunities and Challenges  

E-Print Network (OSTI)

1 Data Mining: Opportunities and Challenges Xindong Wu University of Vermont, USA; Hefei University Systems 2004 ...... #12;3 Outline 1.1. Data Mining OpportunitiesData Mining Opportunities Major Conferences and Journals in Data Mining Main Topics in Data Mining Some Research Directions in Data Mining 2

Wu, Xindong

102

No immediate relief for large mining tire shortage  

Science Conference Proceedings (OSTI)

Inventories are low and they will not get better anytime soon, but mine operators do have a few options. The three main manufacturers supplying tires to the US mining industry, Bridgestone Firestone Off Road Tire Company, Goodyear and Michelin are struggling to keep up with demand, but are unlikely to restore inventories to manageable levels by 2009. Meanwhile Yokohama and Global Tyres have stepped in to help. The article reports plans for expansions to plant in Japan. In the meantime, mine operators need to plan accordingly and pay increased attention to tire maintenance. The larger the tyre, the less available it is. 3 photos.

Fiscor, S.

2006-05-15T23:59:59.000Z

103

Mining Regulations (Missouri)  

Energy.gov (U.S. Department of Energy (DOE))

This legislation applies to all mines in this state engaged in the mining or extraction of minerals for commercial purposes, except barite, marble, limestone, and sand and gravel, or the...

104

Mine Mesh Networks  

Science Conference Proceedings (OSTI)

... and analyzed underground measurements of MF signal strength in the NIOSH Pittsburgh Research Laboratory Safety Research Coal Mine to refine ...

2010-10-05T23:59:59.000Z

105

Data Mining: An Introduction  

Science Conference Proceedings (OSTI)

Data mining, the process of extracting not-so-obvious but useful information from large databases, has emerged as a key business intelligence technology. This report provides an introductory overview of data mining technology and products. It also provides several examples of data mining applications in different industries.

1997-12-17T23:59:59.000Z

106

Mining Local Buffer Data  

Science Conference Proceedings (OSTI)

Web mining employs the techniques of data mining to extract information from the Web for a variety of purposes. The usual sources of data are the log files of WWW or proxy servers. The paper examines the possibility of using the local browser buffer ... Keywords: Behavioural Targeting, Browser Cache, Cacheability, Data Mining, Heaps Law, Internet, Latency, Zipf Law

Andrzej Siemi?ski

2008-06-01T23:59:59.000Z

107

Mining association rules for the quality improvement of the production process  

Science Conference Proceedings (OSTI)

Academics and practitioners have a common interest in the continuing development of methods and computer applications that support or perform knowledge-intensive engineering tasks. Operations management dysfunctions and lost production time are problems ... Keywords: Association rule mining, Continuous improvement, Data mining, Drilling product manufacturing, Industrial maintenance, Knowledge discovery

Bernard Kamsu-Foguem; Fabien Rigal; FéLix Mauget

2013-03-01T23:59:59.000Z

108

Advanced Manufacturing Office: Technical Assistance  

NLE Websites -- All DOE Office Websites (Extended Search)

Assistance on Twitter Bookmark Advanced Manufacturing Office: Technical Assistance on Google Bookmark Advanced Manufacturing Office: Technical Assistance on Delicious Rank...

109

Advanced Manufacturing Office: Financial Opportunities  

NLE Websites -- All DOE Office Websites (Extended Search)

on Twitter Bookmark Advanced Manufacturing Office: Financial Opportunities on Google Bookmark Advanced Manufacturing Office: Financial Opportunities on Delicious Rank...

110

Agricultural Microscopy Division  

Science Conference Proceedings (OSTI)

The Agricultural Microscopy Division advances visual imaging in discerning the quality and content of ingredients and finished products of the feed, fertilizer, seed, and agri-food sectors. Agricultural Microscopy Division Divisions achievement ag

111

The Annual Agricultural Cycle  

E-Print Network (OSTI)

. Sman shad agriculture 1.WAV Length of track 00:44:03 Related tracks (include description/relationship if appropriate) Title of track The Annual Agricultural Cycle Translation of title Description (to be used in archive entry...

Zla ba sgrol ma

2009-11-16T23:59:59.000Z

112

Manufacturing Skills Certification System  

Science Conference Proceedings (OSTI)

... system to their business so that they utilize the skills certification system ... provide input to The Manufacturing Institute about aggregate skill needs of ...

2012-09-20T23:59:59.000Z

113

Wind Manufacturing Facilities  

Energy.gov (U.S. Department of Energy (DOE))

America's wind energy industry supports a growing domestic industrial base. Check out this map to find manufacturing facilities in your state.

114

Locating American Manufacturing:  

Science Conference Proceedings (OSTI)

... future of manufacturing in America but also ... as defined in the North American Industry Classification ... about two thirds of American metropolitan areas ...

2013-07-31T23:59:59.000Z

115

Manufacturing Portal Overview  

Science Conference Proceedings (OSTI)

... The manufacturing sector is an important source of US innovation, accounting for about 70 percent of US industry R&D. ...

2012-05-09T23:59:59.000Z

116

Acoustics by additive manufacturing.  

E-Print Network (OSTI)

??This study focuses on exploring the merging field of additive manufacturing and acoustics and introduces a new type of sound absorber which is regulating performance… (more)

Setaki, F.

2012-01-01T23:59:59.000Z

117

Manufacturing Research & Reports  

Science Conference Proceedings (OSTI)

... Regulatory and Policy Recommendations. The impact of regulations and policies on the manufacturing industry in areas such as tax, energy, trade ...

2013-08-27T23:59:59.000Z

118

US Manufacturing in Context  

Science Conference Proceedings (OSTI)

... manufacturing firms lead the Nation in exports: The $1.3 ... 86% of all US goods exported in 2011 ... growing production of domestic natural gas, and the ...

119

Baldrige by Sector: Manufacturing  

Science Conference Proceedings (OSTI)

Can a manufacturer facing global competition, increased pressure on costs, and the need to show quarterly profits benefit from the Baldrige process ...

2013-08-07T23:59:59.000Z

120

Manufacturing research strategic plan  

SciTech Connect

This plan provides an overall strategic roadmap for the DOE-defense programs advanced manufacturing research program which supports the national science based stockpile stewardship program. This plan represents a vision required to develop the knowledge base needed to ensure an enduring national capability to rapidly and effectively manufacture nuclear weapons.

1995-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Worldwide Energy and Manufacturing USA Inc formerly Worldwide Manufacturing  

Open Energy Info (EERE)

Manufacturing USA Inc formerly Worldwide Manufacturing Manufacturing USA Inc formerly Worldwide Manufacturing USA Jump to: navigation, search Name Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA) Place San Bruno, California Zip 94066 Product Worldwide Manufacturing USA is an engineering company based in San Bruno, California. References Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA) is a company located in San Bruno, California . References ↑ "Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)"

122

Ground subsidence due to mining operations. (Latest citations from the Compendex database). Published Search  

Science Conference Proceedings (OSTI)

The bibliography contains citations concerning ground subsidence associated with mining operations. Mine subsidence is discussed with reference to mathematical modeling, forecasting extent of cavitation, and rock mechanics and mechanisms of stress relaxation. Damage to above and below-ground structures as well as agricultural areas, and mining techniques designed to prevent or reduce subsidence are included. Monitoring of subsidence and detection of cavitation for surface, underground, and ocean floor mining areas are discussed and examples are analyzed. Subsidence due to aquifer water removal is referenced in a related bibliography. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1993-06-01T23:59:59.000Z

123

Advanced Manufacturing Office: U.S. Manufacturer Going Above...  

NLE Websites -- All DOE Office Websites (Extended Search)

U.S. Manufacturer Going Above and Beyond with Superior Energy Performance to someone by E-mail Share Advanced Manufacturing Office: U.S. Manufacturer Going Above and Beyond with...

124

Nonmetallic Mining Reclamation; Oil and Gas (Wisconsin) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nonmetallic Mining Reclamation; Oil and Gas (Wisconsin) Nonmetallic Mining Reclamation; Oil and Gas (Wisconsin) Nonmetallic Mining Reclamation; Oil and Gas (Wisconsin) < Back Eligibility Agricultural Commercial Construction Developer Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Program Info Start Date 1995 State Wisconsin Program Type Siting and Permitting Provider Department of Natural Resources These regulations describe standards relevant to reclamation that must be followed both during and after the completion of mining in a given area. An

125

Talvivaara Nickel Mine  

Science Conference Proceedings (OSTI)

In full production the annual nickel production will be approximately 50,000tpa. In addition, the mine will also produce zinc, copper and cobalt.Talvivaara will ...

126

Coal Mining (Iowa)  

Energy.gov (U.S. Department of Energy (DOE))

These sections describe procedures for coal exploration and extraction, as well as permitting requirements relating to surface and underground coal mining. These sections also address land...

127

Labor and Safety: Mines and Mining Safety (Indiana)  

Energy.gov (U.S. Department of Energy (DOE))

This section contains labor regulations pertaining specifically to coal mine workers. The law establishes the Indiana Mining Board. The Board's duties include: collecting and distributing...

128

Coal Mining Tax Credit (Arkansas)  

Energy.gov (U.S. Department of Energy (DOE))

The Coal Mining Tax Credit provides an income or insurance premium tax credit of $2.00 per ton of coal mined, produced or extracted on each ton of coal mined in Arkansas in a tax year. An...

129

Manufacturing Renaissance: Return of manufacturing to western countries.  

E-Print Network (OSTI)

??Manufacturing Renaissance, i.e. return of manufacturing to west, has been recently observed. This paper analyzes the patterns observed within each of the four main drivers… (more)

Kianian, Babak; Larsson, Tobias

2013-01-01T23:59:59.000Z

130

Industrial and agricultural process heat information user study  

DOE Green Energy (OSTI)

The results of a series of telephone interviews with groups of users of information on solar industrial and agricultural process heat (IAPH) are described. These results, part of a larger study on many different solar technologies, identify types of information each group needed and the best ways to get information to each group. In the current study only high-priority groups were examined. Results from 10 IAPH groups of respondents are analyzed in this report: IPH Researchers; APH Researchers; Representatives of Manufacturers of Concentrating and Nonconcentrating Collectors; Plant, Industrial, and Agricultural Engineers; Educators; Representatives of State Agricultural Offices; and County Extension Agents.

Belew, W.W.; Wood, B.L.; Marle, T.L.; Reinhardt, C.L.

1981-03-01T23:59:59.000Z

131

Sustainable Agriculture Loan Program  

Energy.gov (U.S. Department of Energy (DOE))

The Minnesota Sustainable Agriculture Loan program will provide loans to Minnesota residents actively engaged in farming for capital expenditures which enhance the environmental and economic...

132

Innovations in Manufacturing  

NLE Websites -- All DOE Office Websites (Extended Search)

Gov. Haslam Cuts Ribbon at Carbon Fiber Facility Gov. Haslam Cuts Ribbon at Carbon Fiber Facility Governor Bill Haslam along with David Danielson, EERE's Assistant Secretary, celebrate the opening of the Carbon Fiber Technology Facility. The 390-ft. long processing line is capable of custom unit operation configuration and has a capacity of up to 25 tons per year, allowing industry to validate conversion of their carbon fiber precursors at semi-production scale. Manufacturing Demonstration Facility Manufacturing Demonstration Facility Processing Technologies Advanced Materials Automation and Controls Brochure News Manufacturing Engineering Advanced Materials & Processes Materials for Aerospace On the cover, plus, read ORNL's feature articles on additive manufacturing and its momentum for aerospace applications.

133

Manufacturer: Panasonic Battery Type: ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Battery Specifi cations Manufacturer: Panasonic Battery Type: Nickel Metal Hydride Rated Capacity: 5.5 Ahr Rated Power: Not Available Nominal Pack Voltage: 158.4 VDC Nominal Cell...

134

Solar Thermal Manufacturing Activities  

Reports and Publications (EIA)

This report, Solar Thermal Collector Manufacturing Activities, providesan overview and tables with historical data spanning 2000-2009. These tables willcorrespond to similar tables to be presented in the Renewable Energy Annual 2009 andare numbered accordingly.

Michele Simmons

2010-12-01T23:59:59.000Z

135

Environmental issues of material input in CDTE-module manufacturing  

DOE Green Energy (OSTI)

The goal of a low-cost and high-volume photovoltaic (PV) module fabrication demands an optimized process sequence to guarantee product quality and module stability on a long-term basis. Nevertheless, large-scale module manufacturing uses several input and auxiliary materials and generates waste from processing output materials. The mining and refining of the PV manufacturing material consumes input and auxiliary material and also creates waste. Therefore, investigations into these materials were conducted with respect to their risk potential for environment and health.

Steinberger, H.; Hochwimmer, R.; Schmid, H. [Fraunhofer Inst. fuer Festkoerpertechnologie, Muenchen (Germany); Thumm, W.; Kettrup, A. [GSF, Oberschleissheim (Germany). Inst. fuer Oekologische Chemie; Moskowitz, P. [Brookhaven National Lab., Upton, NY (United States). Biomedical and Environmental Assessment Group

1995-12-31T23:59:59.000Z

136

Advanced Manufacturing Partnership  

Energy.gov (U.S. Department of Energy (DOE))

AMO leads DOE's participation in the national interagency Advanced Manufacturing Partnership (AMP). AMO joins with other Federal agencies investing in innovation and cost-shared R&D projects, supporting manufacturing infrastructure, and facilitating job creation. These actions save energy and provide benefits to U.S. industry and the national economy. AMO contributes more broadly to the AMP with activities in Technology Development, Shared Infrastructure and Facilities, Education and Workforce Development.

137

Mining of Minerals and Ores  

Science Conference Proceedings (OSTI)

...of mining with respect to metal price, metal demand forecast, ore processing and extraction costs, and the socioeconomic as well as environmental impact of the mining

138

Coal Mine Safety Act (Virginia)  

Energy.gov (U.S. Department of Energy (DOE))

This Act is the primary legislation pertaining to coal mine safety in Virginia. It contains information on safety rules, safety standards and required certifications for mine workers, prohibited...

139

Agricultural Lighting and Equipment Rebate Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agricultural Lighting and Equipment Rebate Program Agricultural Lighting and Equipment Rebate Program Agricultural Lighting and Equipment Rebate Program < Back Eligibility Agricultural Savings Category Other Appliances & Electronics Commercial Lighting Lighting Manufacturing Program Info Funding Source Efficiency Vermont Public Benefit Fund Expiration Date 06/30/2013 State Vermont Program Type State Rebate Program Rebate Amount Varies according to technology; prescriptive and custom rebates available Provider Efficiency Vermont In Vermont, agricultural operations are eligible for prescriptive and customized incentives on equipment proven to help make farms more efficient. Prescriptive rebates are available for lighting (free to $175 per fixture, depending on the type of fixture or lighting) and for a variety of equipment including plate coolers, variable speed milk transfer

140

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA)

How Did Manufacturers Use Natural Gas? Manufacturers used natural gas in processes, in boilers, for nonprocess uses, and as feedstock. In 1991 and 1994, ...

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Additive Manufacturing for Large Products.  

E-Print Network (OSTI)

?? This thesis researches the possibility and feasibility of applying additive manufacturing technology in the manufacturing of propellers. The thesis concerns the production at the… (more)

Leirvåg, Roar Nelissen

2013-01-01T23:59:59.000Z

142

Manufacturing Demonstration Facility Technology Collaborations...  

NLE Websites -- All DOE Office Websites (Extended Search)

advanced manufacturing and materials technologies for commercial applications related to additive manufacturing or carbon fiber and composites will have the highest likelihood of...

143

EERE: Advanced Manufacturing Office - Webmaster  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

23.5 Million Investment in Innovative Manufacturing Projects Supports the New Clean Energy Manufacturing Initiative March 26, 2013 New Energy Department Funding to Establish...

144

Manufacturing Consumption of Energy 1991  

U.S. Energy Information Administration (EIA) Indexed Site

3. Energy Consumption in the Manufacturing Sector, 1991 In 1991, the amount of energy consumed in the manufacturing sector was as follows: * Primary Consumption of Energy for All...

145

Advanced Manufacturing Office: Better Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Better Plants on Twitter Bookmark Advanced Manufacturing Office: Better Plants on Google Bookmark Advanced Manufacturing Office: Better Plants on Delicious Rank Advanced...

146

Advanced Manufacturing Office: Pump Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Pump Systems on Twitter Bookmark Advanced Manufacturing Office: Pump Systems on Google Bookmark Advanced Manufacturing Office: Pump Systems on Delicious Rank Advanced...

147

Mining partially annotated images  

Science Conference Proceedings (OSTI)

In this paper, we study the problem of mining partially annotated images. We first define what the problem of mining partially annotated images is, and argue that in many real-world applications annotated images are typically partially annotated and ... Keywords: image annotation completion and prediction, partially annotated training set, semi-supervised learning

Zhongang Qi; Ming Yang; Zhongfei (Mark) Zhang; Zhengyou Zhang

2011-08-01T23:59:59.000Z

148

Integrated Agricultural Technologies Demonstrations  

Science Conference Proceedings (OSTI)

Major challenges currently face California's agricultural community. Increasingly stringent environmental and regulatory controls mandate changes in the use and disposal of agricultural chemicals, require the more aggressive management of farm wastes, and impose new responsibilities for water use. This program demonstrated a number of energy efficient and environmentally friendly technologies designed to address these issues.

2002-08-02T23:59:59.000Z

149

Agricultural Microscopy Division List  

Science Conference Proceedings (OSTI)

Name AffiliationCity, State, CountryAgricultural Microscopy Division2013 Members72 Members as of October 1, 2013Ajbani, RutviInstitute of Chemical TechnologyMumbai, MH, IndiaAlonso, CarmenPuerto Rico Dept ofAgricultureDorado, Puerto RicoArmbrust, KevinLoui

150

Publications Agricultural Economics  

E-Print Network (OSTI)

. (2012). Economics of IPM Decisions. Stored Product Protection (1- 9). Manhattan, KS: Kansas State (1-11). Manhattan, KS: Kansas State. http://entomology.k-state.edu/doc/finished- chapters/s156-ch-27 of Food and Agriculture­ Conservation Effects Assessment Project. How to Build Better Agricultural

151

PRB mines mature  

Science Conference Proceedings (OSTI)

Already seeing the results of reclamation efforts, America's largest surface mines advance as engineers prepare for the future. 30 years after the signing of the Surface Mining Control and Reclamation Act by Jimmy Carter, western strip mines in the USA, especially in the Powder River Basin, are producing more coal than ever. The article describes the construction and installation of a $38.5 million near-pit crusher and overland belt conveyor system at Foundation Coal West's (FCW) Belle Ayr surface mine in Wyoming, one of the earliest PRB mines. It goes on to describe the development by Rio Tinto of an elk conservatory, the Rochelle Hill Conservation Easement, on reclaimed land at Jacobs Ranch, adjacent to the Rochelle Hills. 4 photos.

Buchsbaum, L.

2007-08-15T23:59:59.000Z

152

College of Agriculture Departments and Degree Programs Agricultural  

E-Print Network (OSTI)

Agricultural Education Animal & Range Sciences Land Resources & Environmental Sciences Immunology & Infectious Diseases Multi Disciplinary Agricultural Business Agricultural Education Animal Science Natural Resources & Rangeland Ecology Environmental Sciences Pre-Vet Program (non-degree) Biotechnology Sustainable Foods

Lawrence, Rick L.

153

Request for Information Manufacturing Technology ...  

Science Conference Proceedings (OSTI)

... Page 4. Confidential. All Rights Reserved. ... o The energy sector is representing significant opportunities for manufacturers. ...

2013-08-06T23:59:59.000Z

154

Solar for Mining Hugh Rudnick  

E-Print Network (OSTI)

Solar for Mining Hugh Rudnick Professor Pontificia Universidad Católica de Chile #12;Solar Energy in Mining · Solar energy is becoming affordable · Attractive potential use for mining purposes · Must solve the storage requirement to increase its participation worldwide #12;Solar Energy in Mining · Electrical Energy

Catholic University of Chile (Universidad Católica de Chile)

155

Manufacturing Laboratory (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Manufacturing Laboratory at the Energy Systems Integration Facility. The Manufacturing Laboratory at NREL's Energy Systems Integration Facility (ESIF) focuses on developing methods and technologies that will assist manufacturers of hydrogen and fuel cell technologies, as well as other renewable energy technologies, to scale up their manufacturing capabilities to volumes that meet DOE and industry targets. Specifically, the manufacturing activity is currently focused on developing and validating quality control techniques to assist manufacturers of low temperature and high temperature fuel cells in the transition from low to high volume production methods for cells and stacks. Capabilities include initial proof-of-concept studies through prototype system development and in-line validation. Existing diagnostic capabilities address a wide range of materials, including polymer films, carbon and catalyst coatings, carbon fiber papers and wovens, and multi-layer assemblies of these materials, as well as ceramic-based materials in pre- or post-fired forms. Work leading to the development of non-contact, non-destructive techniques to measure critical dimensional and functional properties of fuel cell and other materials, and validation of those techniques on the continuous processing line. This work will be supported by materials provided by our partners. Looking forward, the equipment in the laboratory is set up to be modified and extended to provide processing capabilities such as coating, casting, and deposition of functional layers, as well as associated processes such as drying or curing. In addition, continuous processes are used for components of organic and thin film photovoltaics (PV) as well as battery technologies, so synergies with these important areas will be explored.

Not Available

2011-10-01T23:59:59.000Z

156

Electrolyzer Manufacturing Progress and Challenges  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrolyzer Manufacturing Electrolyzer Manufacturing Progress and Challenges John Torrance, Director of Manufacturing DOE Manufacturing Workshop 8/12/11 Outline * Proton Commercialization Status: PEM Electrolysis * Current Manufacturing Limitations: Stack - Cost Breakdown - Approaches * Current Manufacturing Limitations: System - Cost Breakdown - Approaches * Potential Impact * Summary and Conclusions 2 3 * World leader in Proton Exchange Membrane (PEM) electrolyzer technology * Founded in 1996 - changed name from Proton Onsite in April 2011 to reflect product expansion. * ISO 9001:2008 registered * Over 1,500 systems operating in 62 different countries. Cell Stacks Complete Systems Turnkey Solutions Military Applications Proton Energy Proton Onsite Headquarters in Wallingford, CT Capabilities * Complete product development, manufacturing & testing

157

Agriculture, technology, and conflict  

E-Print Network (OSTI)

Conflict and agriculture have a long, shared history. The purpose of this research is to look at the relationships between agriculture, agricultural technologies, and conflict during current and recent conflicts, large scale and localized. Agriculture and its related technologies are often affected by conflict, but rarely acknowledged as a cause or solution to conflict. Literature reviews in six topic areas illustrate various facets of the relationship between agriculture and conflict. Research conducted in Santa Cruz del Quiché, Guatemala illustrates the ways farmers were impacted by the country’s civil war. It also examines farmer survival strategies during the war, and reveals the presence of minor localized conflict over water resources. Conflict over land is not a major concern at present. Market access for inputs and outputs are shown to have been a problem for a number of farmers during the civil war. The poverty of Santa Cruz farmers indicates that much could be gained by rural development. Research is unable to support the hypotheses that agricultural technologies have prevented or caused conflict in Santa Cruz del Quiché, or that they have played a large role in recovery from the country’s civil war. The author recommends that future research be undertaken in regions with a diverse set of agricultural technologies, and/or a recent history of significant technological change in agriculture. Policy recommendations include providing secure access to markets during war time, increasing capacity for home-based rural production, and continuing research into resilient crops. Finally, the author suggests that the responsible decision to develop, adopt, or introduce an agricultural technology must take into account the social consequences of that decision, including how the new technology may alleviate or contribute to conflict.

Zilverberg, Cody John

2007-05-01T23:59:59.000Z

158

Photovoltaic manufacturing technology  

DOE Green Energy (OSTI)

This report identifies steps leading to manufacturing large volumes of low-cost, large-area photovoltaic (PV) modules. Both crystalline silicon and amorphous silicon technologies were studied. Cost reductions for each step were estimated and compared to Solarex Corporation's manufacturing costs. A cost model, a simple version of the SAMICS methodology developed by the Jet Propulsion Laboratory (JPL), projected PV selling prices. Actual costs of materials, labor, product yield, etc., were used in the cost model. The JPL cost model compared potential ways of lowering costs. Solarex identified the most difficult technical challenges that, if overcome, would reduce costs. Preliminary research plans were developed to solve the technical problems. 13 refs.

Wohlgemuth, J.H.; Whitehouse, D.; Wiedeman, S.; Catalano, A.W.; Oswald, R. (Solarex Corp., Frederick, MD (United States))

1991-12-01T23:59:59.000Z

159

ATS materials/manufacturing  

SciTech Connect

The Materials/Manufacturing Technology subelement is a part of the base technology portion of the Advanced Turbine Systems (ATS) Program. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. The projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single crystal airfoil manufacturing technologies, materials characterization, and technology information exchange. This paper presents highlights of the activities during the past year. 12 refs., 24 figs., 4 tabs.

Karnitz, M.A.; Wright, I.G.; Ferber, M.K. [and others

1997-11-01T23:59:59.000Z

160

Data Warehousing and Data Mining Conference, January 25, 1999, Singapore Data Mining:Data Mining  

E-Print Network (OSTI)

Data Warehousing and Data Mining Conference, January 25, 1999, Singapore 1 Welcome Data Mining:Data://kais.mines.edu/~xwu/ #12;Data Warehousing and Data Mining Conference, January 25, 1999, Singapore 2 OutlineOutline s Data (supervised, unsupervised, and hybrid) s Problems with data - cleaning, transforming, structuring

Wu, Xindong

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Characteristics of Manufacturing Processes  

Science Conference Proceedings (OSTI)

Table 2   Rating of characteristics for common manufacturing processes...AHB, Vol 4 CVD/PVD All 1 5 5 4 3 AHB, Vol 13, p 456 Rating scheme: 1, poorest; 5, best. Ratings from Ref 5 . AHB, ASM Handbook ; EMH, Engineered

162

Turbine airfoil manufacturing technology  

DOE Green Energy (OSTI)

The specific goal of this program is to define manufacturing methods that will allow single crystal technology to be applied to complex-cored airfoils components for power generation applications. Tasks addressed include: alloy melt practice to reduce the sulfur content; improvement of casting process; core materials design; and grain orientation control.

Kortovich, C. [PCC Airfoils, Inc., Beachwood, OH (United States)

1995-12-31T23:59:59.000Z

163

Overshooting of agricultural prices  

E-Print Network (OSTI)

Rotenberg, Julio J. , "Sticky Prices in the United States,"Monetary Policy on United States Agriculture. A Fix-Price,Flex-Price Approach," Unpublished Ph.D. Disser- tation,

Stamoulis, Kostas G.; Rausser, Gordon C.

1987-01-01T23:59:59.000Z

164

Agricultural Meteorology in China  

Science Conference Proceedings (OSTI)

During nearly five weeks in China (May–June 1981), the author visited scientific institutions and experiment stations engaged in agricultural meterology and climatology research and teaching. The facilities, studies, and research programs at each ...

Norman J. Rosenberg

1982-03-01T23:59:59.000Z

165

Sustainable Manufacturing in the Systems Integration Division  

Science Conference Proceedings (OSTI)

... Sustainability Modeling and Optimization Project. Sustainability of Unit Manufacturing Processes Project. Sustainable Manufacturing Program. ...

2011-12-23T23:59:59.000Z

166

A Review of Manufacturing Uses for Gypsum Produced by Flue Gas Desulfurization Systems  

Science Conference Proceedings (OSTI)

Gypsum is widely used as a source material to manufacture products for building construction applications8212primarily wallboard, cement, and concrete8212and has a number of other commercial applications. The mineral is mined throughout the world (natural gypsum) and also is produced as a result of various industrial processes (synthetic gypsum). The largest source of synthetic gypsum used for manufacturing applications is flue gas desulfurization (FGD) gypsum, the product of wet flue gas desulfurization...

2006-03-07T23:59:59.000Z

167

Uranium Mining and Enrichment  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview Presentation » Uranium Mining and Enrichment Overview Presentation » Uranium Mining and Enrichment Uranium Mining and Enrichment Uranium is a radioactive element that occurs naturally in the earth's surface. Uranium is used as a fuel for nuclear reactors. Uranium-bearing ores are mined, and the uranium is processed to make reactor fuel. In nature, uranium atoms exist in several forms called isotopes - primarily uranium-238, or U-238, and uranium-235, or U-235. In a typical sample of natural uranium, most of the mass (99.3%) would consist of atoms of U-238, and a very small portion of the total mass (0.7%) would consist of atoms of U-235. Uranium Isotopes Isotopes of Uranium Using uranium as a fuel in the types of nuclear reactors common in the United States requires that the uranium be enriched so that the percentage of U-235 is increased, typically to 3 to 5%.

168

Strip Mine Law (Missouri)  

Energy.gov (U.S. Department of Energy (DOE))

This law authorizes the Land Reclamation Commission of the Department of Natural Resources to adopt and promulgate rules and regulations pertaining to strip mining of coal and reclamation, review...

169

Indonesian coal mining  

Science Conference Proceedings (OSTI)

The article examines the opportunities and challenges facing the Indonesian coal mining industry and how the coal producers, government and wider Indonesian society are working to overcome them. 2 figs., 1 tab.

NONE

2008-11-15T23:59:59.000Z

170

Algorithms for data mining  

E-Print Network (OSTI)

Data of massive size are now available in a wide variety of fields and come with great promise. In theory, these massive data sets allow data mining and exploration on a scale previously unimaginable. However, in practice, ...

Wang, Grant J. (Grant Jenhorn), 1979-

2006-01-01T23:59:59.000Z

171

ArcMine: A GIS extension to support mine reclamation planning  

Science Conference Proceedings (OSTI)

This paper presents a new GIS extension, named ArcMine, developed to support reclamation planning in abandoned mining areas. ArcMine provides four tools to (a) assess mine subsidence hazards, (b) estimate the erosion of mine wastes, (c) analyze flow ... Keywords: GIS, Mine reclamation, Mine wastes, Mine water, Reforestation, Subsidence

Sung-Min Kim; Yosoon Choi; Jangwon Suh; Sungchan Oh; Hyeong-Dong Park; Suk-Ho Yoon; Wa-Ra Go

2012-09-01T23:59:59.000Z

172

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Information Integration & Infrastructure Manufacturing Information Integration & Infrastructure PDF format (47 kb) The Information Infrastructure Team in the Computer Applications for Manufacturing organization can provide programming and analysis support for information applications for manufacturing. The Team works closely with customers to help them define their requirements. The Team's experience and expertise can help your manufacturing information needs. Capabilities Provide computer hardware and software standards that directly support the seamless manufacturing initiative. Develop graphical user interfaces (GUI) for applications using the proprietary Windows environment or an open system design using Web servers and client browsers. Provide computer hardware support, including all personal computer

173

Transformational Manufacturing | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Transformational Manufacturing Transformational Manufacturing Argonne's new Advanced Battery Materials Synthesis and Manufacturing R&D Program focuses on scalable process R&D to produce advanced battery materials in sufficient quantity for industrial testing. The U.S. manufacturing industry consumes more than 30 quadrillion Btu of energy per year, directly employs about 12 million people and generates another 7 million jobs in related businesses. Argonne is working with industry to develop innovative and transformational technology to improve the efficiency and competitiveness of domestic manufacturing while reducing its carbon footprint. The lab's efforts concentrate on sustainable manufacturing, applied nanotechnology and distributed energy, with an emphasis on transitioning science discoveries to the market.

174

MDF | Manufacturing Demonstration Facility | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

BTRIC CNMS CSMB CFTF HFIR MDF Working with MDF NTRC OLCF SNS Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration Facility SHARE As the nation's premier research laboratory, ORNL is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. Manufacturing industries engage ORNL's expertise in materials synthesis, characterization, and process technology to reduce technical risk and validate investment for innovations targeting products of the future. DOE's Manufacturing Demonstration Facility, established at ORNL, helps industry adopt new manufacturing technologies to reduce life-cycle energy

175

Manufacturing News | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing Manufacturing News Manufacturing News RSS January 15, 2014 FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute The Obama Administration announces the selection of North Carolina State University to lead a public-private manufacturing innovation institute for next generation power electronics. November 22, 2013 In Cleveland, Alcoa and ArcelorMittal Recognized for Leadership in Energy Efficiency As Part of Obama Administration's Better Plants Program, U.S. Manufacturers Cut Energy Waste and Save Money October 21, 2013 FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency Underscoring President Obama's Climate Action Plan to cut harmful emissions and double energy efficiency, the Energy Department is taking

176

MDF | Manufacturing Demonstration Facility | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with MDF Working with MDF Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration Facility SHARE As the nation's premier research laboratory, ORNL is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. Manufacturing industries engage ORNL's expertise in materials synthesis, characterization, and process technology to reduce technical risk and validate investment for innovations targeting products of the future. DOE's Manufacturing Demonstration Facility, established at ORNL, helps industry adopt new manufacturing technologies to reduce life-cycle energy

177

Manufacturing Initiative | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Areas Research Areas Buildings Climate & Environment Manufacturing Fossil Energy Sensors & Measurement Sustainable Electricity Systems Biology Transportation Clean Energy Home | Science & Discovery | Clean Energy | Research Areas | Manufacturing SHARE Manufacturing Initiative Titanium robotic hand holding sphere fabricated using additive manufacturing Oak Ridge National Laboratory is supporting the DOE's Office of Energy Efficiency and Renewable Energy (EERE) Clean Energy Manufacturing Initiative focusing on American competitiveness in clean energy manufacturing. The DOE Initiative has two primary objectives-increase US competitiveness in the production of clean energy products (e.g., wind turbines, solar panels, energy efficient appliances, light bulbs, vehicles and automotive

178

Manufacturing News | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing Manufacturing News Manufacturing News RSS August 3, 2011 Department of Energy Announces Philips Lighting North America as Winner of L Prize Competition Philips Product Delivers on Department's Challenge to Replace Common Light Bulb with Energy-Saving Lighting Alternative August 2, 2011 Department of Energy to Invest $50 Million to Advance Domestic Solar Manufacturing Market, Achieve SunShot Goal SUNPATH Program Will Boost American Competitiveness, Lower Cost of Solar Energy June 29, 2011 Department of Energy Announces New Partnerships to Support Manufacturing Job Training National Training and Education Resource (NTER) Offers Tools to Train Workers June 24, 2011 Department of Energy Announces $120 Million to Support Development of Innovative Manufacturing Processes

179

Industrial and Agricultural Production Efficiency Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial and Agricultural Production Efficiency Program Industrial and Agricultural Production Efficiency Program Industrial and Agricultural Production Efficiency Program < Back Eligibility Agricultural Industrial Savings Category Other Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Cooling Manufacturing Sealing Your Home Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Design & Remodeling Water Heating Maximum Rebate Custom capital projects: $0.25/kWh, up to 50% of cost; $2/Therm, up to 50% of project cost Custom operation and maintenance projects: $0.08/kWh or $0.40/Therm, up to 50% of project cost Lighting projects: custom lighting incentives get 35% of project cost; prescriptive incentives also available. Total incentive capped at

180

Agricultural Energy Efficiency Program (New York) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agricultural Energy Efficiency Program (New York) Agricultural Energy Efficiency Program (New York) Agricultural Energy Efficiency Program (New York) < Back Eligibility Agricultural Savings Category Other Heating & Cooling Commercial Heating & Cooling Heating Cooling Appliances & Electronics Heat Pumps Commercial Lighting Lighting Manufacturing Water Heating Maximum Rebate $250,000 per farm Program Info Funding Source System Benefits Charge (SBC) Expiration Date 12/01/2015 State New York Program Type State Rebate Program Rebate Amount General: 75% of project costs Energy Audits: up to $2,500 (cost share may be required for audit costs exceeding this amount) Provider New York State Energy Research and Development Authority The New York State Energy Research and Development Authority (NYSERDA) offers incentives for electric and natural gas efficiency improvements made

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Inland Power and Light Company - Agricultural Energy Efficiency Rebate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agricultural Energy Efficiency Agricultural Energy Efficiency Rebate Programs Inland Power and Light Company - Agricultural Energy Efficiency Rebate Programs < Back Eligibility Agricultural Savings Category Other Manufacturing Maximum Rebate Custom: 70% or project cost Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Flow controlling type nozzle for impact sprinklers: $4 Rebuilt or New Impact Sprinklers: $3.75 Nozzle for Impact Sprinkler: $1.50 Rotating Type Sprinklers: $4 Gasket: $2.75 Low-Pressure Regulators: $5 Low-Pressure Sprinklers: $4 Multiple Configuration Nozzles: $3 Multi-Trajectory Sprays: $4 Drains for Lines: $1 Hubs for Wheel-Lines: $14.50 "Goose Neck" Elbow for New Drop Tubes: $1.65 Drop Tubes: $3 Center Pivot Base Boot Gasket: $175

182

Gas Turbine Manufacturers Perspective  

NLE Websites -- All DOE Office Websites (Extended Search)

Viability and Experience of IGCC From a Viability and Experience of IGCC From a Gas Turbine Manufacturers Perspective ASME - IGCC ASME - IGCC Turbo Turbo Expo Expo June 2001 June 2001 GE Power Systems g Klaus Brun, Ph.D. - Manager Process Power Plant Product & Market Development Robert M. Jones - Project Development Manager Process Power Plants Power Systems Power Systems General Electric Company General Electric Company ABSTRACT GE Power Systems g Economic Viability and Experience of IGCC From a Gas Turbine Manufacturers Perspective High natural gas fuel gas prices combined with new technology developments have made IGCC a competitive option when compared to conventional combined cycle or coal steam turbine cycles. Although the initial investment costs for an IGCC plant are still comparatively high, the low

183

Agriculture Residues Recycling  

E-Print Network (OSTI)

Abstract: Saudi Arabia, as well as other countries in the Near East region, is characterized by erratic weather conditions, limited area of fertile arable lands, and with acute water shortage. Although agricultural residues (AGR) production in the region is huge (more than 440 million tons), most of these residues are either burned in the field or utilized in an inefficient way. Utilization of AGR as compost may contribute to expansion of arable lands through its use for reclamation of soil and reduce irrigation requirements. This study was conducted at Al Khalidiah farm, Riyadh, Saudi Arabia to assess compost production at large commercial scale using several types of agricultural and animal by-products with addition of a BZT®Compost Activator (based mainly on microorganism, enzymes and yeast). In this study, two types of compost piles were made at the farm. The first pile of compost was made of different agriculture residues, namely: animal wastes (quail, goat and sheep manure), brownian agricultural wastes (windbreaks residues, date trees, citrus and olive trees pruning) and green landscape grasses (50%, 25 % and 25%, respectively) and was treated with a tested compost activator. The same agriculture residues combination was also made for the second pile as traditional compost

M. W. Sadik; H. M. El Shaer; H. M. Yakot

2010-01-01T23:59:59.000Z

184

Materials Standards for Additive Manufacturing  

Science Conference Proceedings (OSTI)

... ASTM F2924 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion) except for standards ...

2013-06-04T23:59:59.000Z

185

Implementation of Sustainable Manufacturing Standards  

Science Conference Proceedings (OSTI)

... Manufacturing Standards Kathi Futornick, LEED AP Global Sustainability Practice URS Corporation NIST Workshop October 13-15, 2009 ...

2009-10-20T23:59:59.000Z

186

NIST Workshop on Sustainable Manufacturing  

Science Conference Proceedings (OSTI)

... Day1: 15:15 – 15:30. Kathi Futornick. URS Corporation. Standards Opportunity in Sustainable Product Development and Manufacturing. ...

2009-12-01T23:59:59.000Z

187

NIST Additive Manufacturing Test Artifact  

Science Conference Proceedings (OSTI)

NIST Additive Manufacturing Test Artifact. Summary. ... The test artifact is to be built using the AM system under investigation. ...

2013-04-26T23:59:59.000Z

188

Why Manufacturing Matters to California  

Science Conference Proceedings (OSTI)

... Sources: Bureau of Labor Statistics, IHS Global Insight. Manufacturing employment (left) ... Sources: Bureau of Labor Statistics, IHS Global Insight. ...

2012-10-01T23:59:59.000Z

189

Project: Manufacturing Services Network Models  

Science Conference Proceedings (OSTI)

... expressivity of a pattern library for manufacturing service capability information, by demonstrating the target information retrieval behavior enabled ...

2013-01-03T23:59:59.000Z

190

Integrating Materials and Manufacturing Innovation  

Science Conference Proceedings (OSTI)

Jun 13, 2012 ... 06/13 - TMS Launches New Open Access Journal: Integrating Materials and Manufacturing Innovation. Patti Dobranski Communication ...

191

Additive Manufacturing: Pursuing the Promise  

NLE Websites -- All DOE Office Websites (Extended Search)

capability have captured the imaginations of investors. Revolutionary Speed, Efficiency, Optimization Additive manufacturing has the potential to vastly accelerate innovation,...

192

Manufacturing Glossary - Energy Information Administration  

U.S. Energy Information Administration (EIA)

Propylene (C 3 H 6): A normally gaseous olefinic hydrocarbon recovered from refinery processes or petrochemical processes. In the manufacturing ...

193

Environmental radioactivity assessment around old uranium mining sites near Mangualde (Viseu), Portugal  

SciTech Connect

Uranium ore was extracted in the surroundings of Mangualde city, North of Portugal, in the mines of Cunha Baixa, Quinta do Bispo and Espinho until a few years ago. Mining waste, milling tailings and acid mine waters are the on site remains of this extractive activity. Environmental radioactivity measurements were performed in and around these sites in order to assess the dispersal of radionuclides from uranium mining waste and the spread of acidic waters resulting from the in situ uranium leaching with sulphuric acid. Results show migration of acid waters into groundwater around the Cunha Baixa mine. This groundwater is tapped by irrigation wells in the agriculture area near the Cunha Baixa village. Water from wells displayed uranium ({sup 238}U) concentrations up to 19x10{sup 3} mBq L{sup -1} and sulphate ion concentrations up to 1070 mg L{sup -1}. These enhanced concentrations are positively correlated with low water pH, pointing to a common origin for radioactivity, dissolved sulphate, and acidity in underground mining works. Radionuclide concentrations were determined in horticulture and farm products from this area also and results suggest low soil to plant transfer of radionuclides and low food chain transfer of radionuclides to man. Analysis of aerosols in surface air showed re suspension of dust from mining and milling waste heaps. Therefore, it is recommended to maintain mine water treatment and to plan remediation of these mine sites in order to prevent waste dispersal in the environment. (authors)

Carvalho, Fernando P.; Torres, Lubelia M.; Oliveira, Joao M. [Instituto Tecnologico e Nuclear, Departamento de Proteccao Radiologica e Seguranca Nuclear, E.N. 10, 2686-953 Sacavem (Portugal)

2007-07-01T23:59:59.000Z

194

Agriculture | OpenEI  

Open Energy Info (EERE)

Agriculture Agriculture Dataset Summary Description The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 on, is available at UNdata. This dataset relates to the consumption of alcohol by the transportation industry. Source United Nations (UN) Date Released December 09th, 2009 (5 years ago) Date Updated Unknown Keywords Agriculture Alcohol consumption transportation industry UN Data application/xml icon UN Data: consumption by transportation industry XML (xml, 95 KiB) text/csv icon UN Data: consumption by transportation industry XLS (csv, 21.6 KiB)

195

Indian Agriculture and Foods  

NLE Websites -- All DOE Office Websites (Extended Search)

Agriculture and Foods Agriculture and Foods Nature Bulletin No. 387-A September 19, 1970 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation INDIAN AGRICULTURE AND FOODS Most of the Indian tribes east of the Great Plains were part-time farmers. Some of them cultivated sunflowers, giant ragweed, canary grass and pigweed for their seeds, which they used as food. Many grew tobacco. But corn, beans and squash -- wherever the climate permitted - - were the principal crops. There were several varieties of beans. They ate both the seeds and rinds of some dozens of kinds of squash and pumpkin. When game was not abundant there was a wealth of wild fruits, berries, and many kinds of wild plants with edible leaves, seeds, or roots. Corn, however, was the ' staff of life" and they depended on corn, beans and squash -- "the three sisters" -- for year-round food.

196

Out of Bounds Additive Manufacturing  

Science Conference Proceedings (OSTI)

Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing (AM) system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

Holshouser, Chris [Lockheed Martin Corporation; Newell, Clint [Lockheed Martin Corporation; Palas, Sid [Lockheed Martin Corporation; Love, Lonnie J [ORNL; Kunc, Vlastimil [ORNL; Lind, Randall F [ORNL; Lloyd, Peter D [ORNL; Rowe, John C [ORNL; Blue, Craig A [ORNL; Duty, Chad E [ORNL; Peter, William H [ORNL; Dehoff, Ryan R [ORNL

2013-01-01T23:59:59.000Z

197

A model for fast web mining prototyping  

Science Conference Proceedings (OSTI)

Web mining is a computation intensive task, even after the mining tool itself has been developed. Most mining software are developed ad-hoc and usually are not scalable nor reused for other mining tasks. The objective of this paper is to present a model ... Keywords: model, prototyping, web mining, web mining applications

Álvaro Pereira; Ricardo Baeza-Yates; Nivio Ziviani; Jesús Bisbal

2009-02-01T23:59:59.000Z

198

Computational aspects of data mining  

Science Conference Proceedings (OSTI)

The last decade has witnessed an impressive growth of Data Mining through algorithms and applications. Despite the advances, a computational theory of Data Mining is still largely outstanding. This paper discusses some aspects relevant to computation ...

Flaviu Adrian M?rginean

2003-05-01T23:59:59.000Z

199

Montana Coal Mining Code (Montana)  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Labor and Industry is authorized to adopt rules pertaining to safety standards for all coal mines in the state. The Code requires coal mine operators to make an accurate map or...

200

BUREAU OF MINES  

E-Print Network (OSTI)

Mines to conduct mineral surveys on U.S. Bureau of Land Management administered land designated as Wilderness Study Areas " •.. to determine the mineral values, if any, that may be present...." Results must be made available to the public and be submitted to the President and the Congress. This report presents the results of a Bureau of Mines mineral survey of a portion of the Clan Alpine Mountains Wilderness Study Area (NV-030-l02), Churchill County, NV. This open-file report will be summarized in a joint report published by the U.S. Geological Survey. The data were gathered and interpreted by Bureau of Mines personnel from Western Field Operations Center, E. 360 Third Avenue, Spokane, WA 99202. The report has been edited by members of the Branch of Mineral Land Assessment at the field center and

Mineral L; Assessmen Tf; Jerry E. Olson; Donald P. Hodel; Robert C. Horton; Director Preface

1976-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Additive manufacturing capabilities expanding | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Additive manufacturing capabilities expanding January 01, 2013 Large-scale polymer additive manufacturing equipment located at the Manufacturing Demonstration Facility. Additive...

202

EERE: Clean Energy Manufacturing Initiative Home Page  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Manufacturing Initiative Search Search Help Clean Energy Manufacturing Initiative EERE Clean Energy Manufacturing Initiative Printable Version Share this resource Send a...

203

Energy Use in Manufacturing ? 1998 to 2002  

U.S. Energy Information Administration (EIA) Indexed Site

Use in Manufacturing - 1998 to 2002 Energy Use in Manufacturing provides information related to energy consumption changes within the U.S. manufacturing sector between 1998 and...

204

Manufacturing Science and Technology: Organizations  

NLE Websites -- All DOE Office Websites (Extended Search)

Machining Operations Machining Operations Machining Services Electronic Fabrication Manufacturing Process Science & Technology Thin Film, Vacuum, & Packaging Organic Materials Ceramic & Glass Meso Manufacturing & Systems Development Visiting Us AMTTP Center Organizational chart Organizations Our Business areas Manufacturing Science and Technology David Plummer, Director Manufacturing Enterprise Joe M. Harris, Senior Manager Machining Operations Mathew Donnelly, Manager Machining Services Daryl Reckaway, Acting Manager Electronic Fabrication Phillip L. Gallegos, Manager Manufacturing Process Science and Technology Mark F. Smith, Senior Manager Thin Film, Vacuum, and Packaging Mark F. Smith, Acting Manager Organic Materials Mike Kelly, Manager Ceramic and Glass Alex Roesler, Manager

205

Mining ideas from textual information  

Science Conference Proceedings (OSTI)

This approach introduces idea mining as process of extracting new and useful ideas from unstructured text. We use an idea definition from technique philosophy and we focus on ideas that can be used to solve technological problems. The rationale for the ... Keywords: Idea mining, Technology, Text classification, Text mining

Dirk Thorleuchter; Dirk Van den Poel; Anita Prinzie

2010-10-01T23:59:59.000Z

206

The lighting of underground mines  

SciTech Connect

This book describes mine lighting problems. It is intended as a textbook on mine lighting knowledge, a reference book for people needing information on the subject, and as a design guide for mine personnel who lack specific training in lighting principles.

Trotter, D.A.

1983-01-01T23:59:59.000Z

207

From data to knowledge mining  

Science Conference Proceedings (OSTI)

Most past approaches to data mining have been based on association rules. However, the simple application of association rules usually only changes the user's problem from dealing with millions of data points to dealing with thousands of rules. Although ... Keywords: Data Mining, Knowledge Cohesion, Ontology, Sense Making, Text Mining

Ana cristina Bicharra garcia; Inhauma Ferraz; Adriana s. Vivacqua

2009-11-01T23:59:59.000Z

208

Advanced Manufacturing Office: Motor Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Motor Systems to Motor Systems to someone by E-mail Share Advanced Manufacturing Office: Motor Systems on Facebook Tweet about Advanced Manufacturing Office: Motor Systems on Twitter Bookmark Advanced Manufacturing Office: Motor Systems on Google Bookmark Advanced Manufacturing Office: Motor Systems on Delicious Rank Advanced Manufacturing Office: Motor Systems on Digg Find More places to share Advanced Manufacturing Office: Motor Systems on AddThis.com... Quick Links Energy Resource Center Technical Publications by Energy System Energy-Efficient Technologies Incentives & Resources by Zip Code Better Plants Superior Energy Performance Contacts Motor Systems Photo of Man Checking Motor Performance Motor-driven equipment accounts for 54% of manufacturing electricity use. Dramatic energy and cost savings can be achieved in motor systems by

209

Revolutionizing Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revolutionizing Manufacturing Revolutionizing Manufacturing Revolutionizing Manufacturing Addthis Saving Energy and Resources 1 of 4 Saving Energy and Resources Thanks to additive manufacturing technology, Oak Ridge National Laboratory was able to fabricate a robotic hand with less energy use and material waste. The novel, lightweight, low-cost fluid powered hand was selected for a 2012 R&D 100 award. | Photo courtesy of Oak Ridge National Laboratory. Partnering with Industry 2 of 4 Partnering with Industry The Energy Department's Manufacturing Demonstration Facility at Oak Ridge National Laboratory includes an array of state-of-the-art additive manufacturing capabilities, allowing researchers and industry to develop innovative manufacturing solutions. | Photo courtesy of Oak Ridge National

210

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Manufacturing Manufacturing Sector Overview 1991-1994 Energy Information Administration/Manufacturing Consumption of Energy 1994 xiii Why Do We Investigate Energy Use in the Manufacturing Sector? What Data Do EIA Use To Investigate Energy Use in the Manufacturing Sector? In 1991, output in the manufactur- ing sector fell as the country went into a recession. After 1991, however, output increased as the country slowly came out of the recession. Between 1991 and 1994, manufacturers, especially manu- facturers of durable goods such as steel and glass, experienced strong growth. The industrial production index for durable goods during the period increased by 21 percent. Real gross domestic product for durable goods increased a corre- sponding 16 percent. The growth of nondurables was not as strong-- the production index increased by only 9 percent during this time period.

211

Agriculture: Tendencies & Deficiencies  

E-Print Network (OSTI)

Agriculture: Tendencies & Deficiencies Tad Patzek, Petroleum & Geosystems Engineering, UT Austin of Conclusions, cntd. The main energy crops I have looked at are maize, sugarcane, soybeans, and oil palms are witnessing a global move away from food to energy crops. Diverting more land to pure energy crops

Patzek, Tadeusz W.

212

Action Plan Agricultural Sciences  

E-Print Network (OSTI)

lines, and becoming an international benchmark in some of them. Incentives will be given to those (elimination of wastes genera- ted by society, decontamination of soils, clean agriculture, etc change, energy or water). Institutes and Centres that comprise the Area The Area comprises a total of 17

Fitze, Patrick

213

STATEMENT OF CONSIDERATIONS REQUEST BY MODINE MANUFACTURING COMPANY FOR AN ADVANCE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MODINE MANUFACTURING COMPANY FOR AN ADVANCE MODINE MANUFACTURING COMPANY FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS UNDER A SUBCONTRACT WITH VEHICLE PROJECTS, LLC UNDER DOE COOPERATIVE AGREEMENT NO. DE-FC36-01GO11095; W(A)-04-042; CH-1207 The Petitioner, Modine Manufacturing Company (Modine), has requested a waiver of domestic and foreign patent rights for all subject inventions made by its employees and its wholly-owned subsidiaries' employees arising from the above referenced cooperative agreement entitled "Fuel Cell Mine Loader and Prototype Locomotive". The Petitioner is a subcontractor under the above-identified cooperative agreement with Vehicle Projects, LLC, a domestic small business. Under the cooperative agreement, Vehicle Projects, LLC is leading a teaming arrangement to design and build an experimental fuel cell powered underground mining

214

Hydraulic mining method  

DOE Patents (OSTI)

A hydraulic mining method includes drilling a vertical borehole into a pitched mineral vein and a slant borehole along the footwall of the vein to intersect the vertical borehole. Material is removed from the mineral vein by a fluid jet stream and the resulting slurry flows down the footwall borehole into the vertical borehole from where it is pumped upwardly therethrough to the surface.

Huffman, L.H.; Knoke, G.S.

1984-06-15T23:59:59.000Z

215

Agricultural Microscopy Newsletter March 11  

Science Conference Proceedings (OSTI)

AOCS Agricultural Microscopy Division Newsletter March 2011 Greetings from the Chairperson The Agricultural Microscopy Division would like to take this opportunity to express our sincere sympathy to the family and friends of George Liepa who rece

216

EL Program: Systems Integration for Manufacturing and ...  

Science Conference Proceedings (OSTI)

... Strategic Goal: Smart Manufacturing, Construction, and Cyber-Physical Systems ... changing manufacturing by enabling a transformation to digitized ...

2013-01-03T23:59:59.000Z

217

Renewable Energy Equipment Manufacturer Tax Credit | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturer Tax Credit Renewable Energy Equipment Manufacturer Tax Credit Eligibility Commercial Industrial Savings For Bioenergy Biofuels Alternative Fuel Vehicles Commercial...

218

Autogenic Pressure Reactions for Battery Materials Manufacture...  

NLE Websites -- All DOE Office Websites (Extended Search)

Autogenic Pressure Reactions for Battery Materials Manufacture Technology available for licensing: A unique method for anode and cathode manufacture autogenicpressurereactions...

219

NIST Sustainable Manufacturing Indicators Repository (SMIR)  

Science Conference Proceedings (OSTI)

... manufacturing strongly influence a product's life cycle impacts on the environment and the company's sustainability. Sustainable manufacturing ...

220

Energy Efficiency Standards for Manufactured Housing | Building...  

NLE Websites -- All DOE Office Websites (Extended Search)

Regulations Determinations Federal Buildings Manufactured Housing Resource Center Energy Efficiency Standards for Manufactured Housing Section 413 of the Energy...

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Advanced Technology Vehicles Manufacturing Incentive Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program A fact sheet detailling the advanced technology vehicles...

222

Reclaiming Fibrous Material in Manufacturing Processes  

Science Conference Proceedings (OSTI)

Abstract Scope, In the manufacture of faced fiberglass insulation, defects may ... There are approximately 29 fiberglass insulation manufacturing plants across ...

223

Microstructure and Properties and Manufacturing Technologies  

Science Conference Proceedings (OSTI)

Oct 29, 2013 ... Advances in Hydroelectric Turbine Manufacturing and Repair: Microstructure and Properties and Manufacturing Technologies Sponsored by: ...

224

Agricultural Microscopy Division Newsletter September 2013  

Science Conference Proceedings (OSTI)

Read the latest news from the Agricultural Microscopy division. Agricultural Microscopy Division Newsletter September 2013 Agricultural Microscopy Division Newsletter September 2013 ...

225

Wind energy applications in agriculture  

DOE Green Energy (OSTI)

Separate abstract are included for each of the papers presented concerning the use of wind turbines in agriculture.

Kluter, H.H.; Soderholm, L.H. (eds.)

1979-01-01T23:59:59.000Z

226

Steam Champions in Manufacturing  

E-Print Network (OSTI)

Traditionally, industrial steam system management has focused on operations and maintenance. Competitive pressures, technology evolution, and increasingly complex regulations provide additional management challenges. The practice of operating a steam system demands the managerial expertise of a "Steam Champion," which will be described in this paper. Briefly, the steam champion is a facility professional who embodies the skills, leadership, and vision needed to maximize the effectiveness of a plant's steam system. Perhaps more importantly, the steam champion's definitive role is that of liaison between the manufacturer's boardroom and the plant floor. As such, the champion is able to translate the functional impacts of steam optimization into equivalent corporate rewards, such as increased profitability, reliability, workplace safety, and other benefits. The prerequisites for becoming a true steam champion will include engineering, business, and management skills.

Russell, C.

2001-05-01T23:59:59.000Z

227

Manufacturing consumption of energy 1991  

SciTech Connect

This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

1994-12-01T23:59:59.000Z

228

Table 23. Coal Mining Productivity by State, Mine Type, and Mine Production Range, 2012  

U.S. Energy Information Administration (EIA) Indexed Site

Mining Productivity by State, Mine Type, and Mine Production Range, 2012 Mining Productivity by State, Mine Type, and Mine Production Range, 2012 (short tons produced per employee hour) U.S. Energy Information Administration | Annual Coal Report 2012 Table 23. Coal Mining Productivity by State, Mine Type, and Mine Production Range, 2012 (short tons produced per employee hour) U.S. Energy Information Administration | Annual Coal Report 2012 Mine Production Range (thousand short tons) Coal-Producing State, Region 1 and Mine Type Above 1,000 Above 500 to 1,000 Above 200 to 500 Above 100 to 200 Above 50 to 100 Above 10 to 50 10 or Under Total 2 Alabama 1.69 2.50 1.95 1.72 1.83 0.69 0.55 1.68 Underground 1.73 - - - 1.08 0.31 - 1.64 Surface 1.36 2.50 1.95 1.72 2.11 1.19 0.55 1.75 Alaska 5.98 - - - - - - 5.98 Surface 5.98 - - - - - - 5.98 Arizona 7.38 - - - - - - 7.38 Surface

229

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Machining Machining PDF format (236 kb) MS&T's machining group consists of two departments: Manufacturing Processing, and Manufacturing Processes and Services. The two departments team to build, procure, and assemble unique prototype and production hardware with diverse quality requirements. The in-house capability can manufacture hardware ranging from microscopic to proportions measured in feet and tons. The group's outside contacts and resources are almost boundless. This team's expertise includes: precision machining, welding, fabrication and assembly, aircraft quality sheet metal construction, and explosives machining and assembly. The department can manage a variety of activities: design modifications, in-house fabrication, outside shop selection and surveillance and manufacturing records management.

230

Manufacturing Consumption of Energy 1991  

U.S. Energy Information Administration (EIA) Indexed Site

at the extent to which manufacturers exercised their ability to choose the mix of energy sources at their discretion. Nonswitchable Minimum Requirements Generally, a...

231

Manufacturing — Its Evolution and Future  

E-Print Network (OSTI)

of the Computer Integrated Manufacturing (CIM) System.CIM’s potential capability to integrate former “bits andto develop and implement CIM system technology and reap its

Merchant, M. Eugene; Dornfeld, David; Wright, Paul K

2005-01-01T23:59:59.000Z

232

Solar collector manufacturing activity 1993  

DOE Green Energy (OSTI)

The report presents national and State-level data on the U.S. solar thermal collector and photovoltaic cell and module manufacturing industry.

Not Available

1994-08-15T23:59:59.000Z

233

NIST SBIR Manufacturing Related Emphasis  

Science Conference Proceedings (OSTI)

... the mission of that department or agency, to give high priority within the SBIR programs to manufacturing-related research and development (R&D). ...

2012-09-11T23:59:59.000Z

234

Implications for the Manufacturing Industry  

Science Conference Proceedings (OSTI)

Plus, Quality and Response Time are Competitive. In Summary, China has ... Significant offshore demand and manufacturing base established by American and ...

235

Manufacturing Consumption of Energy 1991  

U.S. Energy Information Administration (EIA) Indexed Site

includes descriptions of the 30 groups that comprise the strata of the Manufacturing Energy Consumption Survey. These are the 20 major industrial groups (two-digit SIC) and...

236

Advanced Manufacturing Office: Closed Solicitations  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Production EE-2E 08112008 09192008 Manufacturing- Industrial Distributed Energy FuelFeedstock Flexibility and Combined Heat and Power U.S. Department of Energy- Industrial...

237

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Courtesy of ZCorp The Rapid Prototyping Laboratory (RPL) supports internal design, manufacturing, and process development with three rapid prototyping (RP) technologies:...

238

Advanced Manufacturing Office: Information Resources  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

incentives, tools, and training to help companies of all sizes identify energy saving projects and chart a path toward continuous energy improvement. Advanced Manufacturing...

239

Advanced Manufacturing Office: Financial Opportunities  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

organizations offer ways to help manufacturers identify and implement energy-saving projects at their plants. Search the State Incentives and Resource Database to find rebates,...

240

Manufacturing Consumption of Energy 1991  

U.S. Energy Information Administration (EIA) Indexed Site

B Survey Design, Implementation, and Estimates Introduction The 1991 Manufacturing Energy Consumption Survey (MECS) has been designed by the Energy Information Administration...

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Manufacturing Consumption of Energy 1991  

U.S. Energy Information Administration (EIA) Indexed Site

J Related EIA Publications on Energy Consumption Energy Information AdministrationManufacturing Consumption of Energy 1991 526 Appendix J Related EIA Publications on Energy...

242

Wireless technology for integrated manufacturing  

SciTech Connect

This paper describes the ground breaking work in Oak Ridge facilities that now leads us to the brink of the wireless revolution in manufacturing. The focus is on solving tough technological problems necessary for success and addressing the critical issues of throughput, security, reliability, and robustness in applying wireless technology to manufacturing processes. Innovative solutions to these problems are highlighted through detailed designs and testbed implementations that demonstrate key concepts. The DOE-Oak Ridge complex represented by the Oak Ridge Centers for Manufacturing Technologies (ORCMT) continues to develop these technologies and will continue to focus on solving tough manufacturing problems.

Manges, W.W.; Allgood, G.O.; Shourbaji, A.A.

1996-08-01T23:59:59.000Z

243

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Information AdministrationManufacturing Consumption of Energy 1994 Introduction The market for natural gas has been changing for quite some time. As part of natural gas...

244

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Detailed Tables 28 Energy Information AdministrationManufacturing Consumption of Energy 1994 1. In previous MECS, the term "primary energy" was used to denote the "first use" of...

245

MDF | Manufacturing Demonstration Facility | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

BTRIC CNMS CSMB CFTF HFIR MDF Working with MDF NTRC OLCF SNS Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF |...

246

Solar and Wind Manufacturing Incentive  

Energy.gov (U.S. Department of Energy (DOE))

Manufacturers of solar or wind equipment or components in Kansas may be eligible for financing through the Kansas Department of Commerce to support research, development, engineering or...

247

Smart Manufacturing Processes and Equipment  

Science Conference Proceedings (OSTI)

... on testing machine tool capability for batch production (ISO 26303 ... NC Manufacturing Group (KTH, Step Tools, Sandvik, GE Energy, University of ...

2013-01-02T23:59:59.000Z

248

MANUFACTURING NIST Impact Verification Program  

Science Conference Proceedings (OSTI)

... manufactured from structural steel such as oil and gas ... both in the US and around the world. ... of proficiency test data available for production lots.

2013-01-30T23:59:59.000Z

249

Cost Methodology for Biomass Feedstocks: Herbaceous Crops and Agricultural Residues  

DOE Green Energy (OSTI)

This report describes a set of procedures and assumptions used to estimate production and logistics costs of bioenergy feedstocks from herbaceous crops and agricultural residues. The engineering-economic analysis discussed here is based on methodologies developed by the American Society of Agricultural and Biological Engineers (ASABE) and the American Agricultural Economics Association (AAEA). An engineering-economic analysis approach was chosen due to lack of historical cost data for bioenergy feedstocks. Instead, costs are calculated using assumptions for equipment performance, input prices, and yield data derived from equipment manufacturers, research literature, and/or standards. Cost estimates account for fixed and variable costs. Several examples of this costing methodology used to estimate feedstock logistics costs are included at the end of this report.

Turhollow Jr, Anthony F [ORNL; Webb, Erin [ORNL; Sokhansanj, Shahabaddine [ORNL

2009-12-01T23:59:59.000Z

250

Heavy metals content in acid mine drainage at abandoned and active mining area  

Science Conference Proceedings (OSTI)

This study was conducted at former Barite Mine Tasik Chini and former iron mine Sungai Lembing in Pahang

2013-01-01T23:59:59.000Z

251

Mining Electrification: Data Collection of Battery Operated Mining Equipment  

Science Conference Proceedings (OSTI)

The mining industry has used electrically powered equipment for decades. However, problems related to battery charging and changing have prevented purchase and use of electric equipment in some sectors of the industry. Currently, mines use "conventional" chargers that have long charge times and that decrease optimal use of battery-powered equipment. The batteries most commonly used in underground mining operations are 128 volts, a range not yet adopted by fast-charge battery technology. Developing and in...

2011-12-16T23:59:59.000Z

252

Coal mining technology, economics and policy - 1984  

SciTech Connect

This book presents the papers given at a conference on US coal mines. Topics considered at the conference included coal preparation, fine coal and refuse dewatering, flotation, coal transport, storage, environmental controls, wetlands, farmland reclamation, acid rain, longwall mining, mine monitoring systems, occupational safety, training, surface mining, underground mining, water resources development, and the US export policy.

Not Available

1984-01-01T23:59:59.000Z

253

Barron Electric Cooperative - Commercial, Industrial, and Agricultural...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial, and Agricultural Energy Efficiency Rebate Program Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program...

254

THE IMPACT OF A URANIUM MINING SITE ON THE STREAM SEDIMENTS (CRUCEA MINE, ROMANIA)  

E-Print Network (OSTI)

THE IMPACT OF A URANIUM MINING SITE ON THE STREAM SEDIMENTS (CRUCEA MINE, ROMANIA) Petrescu L. 1 methods were used to evaluate the impact of uranium mine dumps on the stream sedi- ments from Crucea uranium mine show that the impact of Crucea mine on water quality downstream of mining area

Paris-Sud XI, Université de

255

Ground subsidence due to mining operations. October 1976-November 1989 (Citations from the COMPENDEX data base). Report for October 1976-November 1989  

Science Conference Proceedings (OSTI)

This bibliography contains citations concerning ground subsidence associated with mining operations. Mine subsidence is discussed with reference to mathematical modeling, forecasting extent of cavitation, and rock mechanics and mechanisms of stress relaxation. Damage to above- and below-ground structures as well as agricultural areas, and mining techniques designed to prevent or reduce subsidence are included. Monitoring of subsidence and detection of cavitation for surface, underground, and ocean-floor mining areas are discussed and examples are analyzed. Subsidence due to aquifer water removal is referenced in a related published bibliography. (Contains 213 citations fully indexed and including a title list.)

Not Available

1990-01-01T23:59:59.000Z

256

Manufacturing Blog | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing Manufacturing Blog Manufacturing Blog RSS January 15, 2014 Next-Generation Power Electronics: Reducing Energy Waste and Powering the Future From unleashing more powerful and energy-efficient laptops, cell phones and motors, to shrinking utility-scale inverters from 8,000 pound substations to the size of a suitcase, wide bandgap semiconductors could be one of the keys to our clean energy future. January 6, 2014 Manufacturing Spotlight: Boosting American Competitiveness Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient. November 15, 2013 Secretary Moniz Joins President Obama in Visit to Cleveland High-Strength Steel Factory Secretary Moniz and President Obama toured a high-strength steel plant in

257

Advanced Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Manufacturing Advanced Manufacturing Advanced Manufacturing EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency - promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which

258

Manufacturing Data | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Data Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing Manufacturing Data These Federal datasets contain a wealth of information for manufacturing - either from information in a single dataset or by combining data from more than one place. This site will be enhanced with the addition of new datasets, and new apps using these datasets, as they are developed. Search Terms Category -Any- Geospatial Items per page 25 50 100 Apply Name Downloads Rating TradeStats Express TradeStats Express provides statistics on U.S. merchandise trade at the national and state levels. Data can also be displayed in maps, graphs, tables, or as exports, imports, and trade balances.... Data Extraction

259

Manufacturing Fuel Cell Manhattan Project  

NLE Websites -- All DOE Office Websites (Extended Search)

to to DOE Fuel Cell Manufacturing Workshop 2011 John Christensen, PE NREL Consultant DOE Fuel Cell Market Transformation Support August 11, 2011 Manufacturing Fuel Cell Manhattan Project √ Identify manufacturing cost drivers to achieve affordability √ Identify best practices in fuel cell manufacturing technology √ Identify manufacturing technology gaps √ Identify FC projects to address these gaps MFCMP Objectives Completed Final Report due out Nov 2010 B2PCOE Montana Tech SME's Industry Academia Government FC Consortiums Power ranges * <0.5 kW (man portable / man wearable) * 0.5 kW< Power range < 10 kW (mobile power) Fuels: Hydrogen and reformed hydrocarbons *Packaged Fuels < 0.5 kW * Near term solution * Move through the supply chain like batteries

260

Mining and Gas and Oil Production (North Dakota) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mining and Gas and Oil Production (North Dakota) Mining and Gas and Oil Production (North Dakota) Mining and Gas and Oil Production (North Dakota) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Savings Category Buying & Making Electricity Program Info State North Dakota Program Type Siting and Permitting This chapter of the North Dakota Code contains provisions for oil, gas, and coal mining and the development of geothermal resources. This chapter

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Mining Your Brain For Safety  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, COM 2011. Symposium, WORLD GOLD. Presentation Title, Mining Your Brain For Safety: A New Approach To Utilizing Your Best ...

262

Hungarian Mining and Metallurgical (OMBKE)  

Science Conference Proceedings (OSTI)

ORGANIZATION. Members work in six different sections within the Society. These are: Mining (coal and minerals); Oil and gas; Iron and steel; Nonferrous metals ...

263

Treatment of acid mine lakes.  

E-Print Network (OSTI)

??Mining of lignite in Lusatia has a long history of over 100 years. The extracted brown coal is utilized to generate electricity in three large… (more)

Schipek, Mandy

2011-01-01T23:59:59.000Z

264

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network (OSTI)

-volume production, and to direct future public-private partnerships that will facilitate transfer of technology will identify and prioritize topics for public-private R&D on manufacturing of PEM fuel cells. Fuel Cell System

265

A Glossary of Mining & Metallurgical Terms, 1881  

Science Conference Proceedings (OSTI)

Jul 18, 1981... or two other sources, to serve as an appendix to a new work on mining ... AIME, the American Institute of Mining, Metallurgical, and Petroleum ...

266

MINES CONTENT MANAGEMENT SYSTEM WORKING WITH HYPERLINKS  

E-Print Network (OSTI)

-page: http://inside.mines.edu/~msimoes and http://aceps.mines.edu Citation Profile (Scholar Google): http://scholar.google.com

267

Coal mining technology: theory and practice  

SciTech Connect

This book is intended for use in teaching coal-mine design to undergraduate mining engineering students. The preliminary chapters cover the geology of coal, coal statistics (classification, distribution, resources etc.), exploration and mine planning and development. Auxiliary operations such as ventilation, drainage and ground control are considered in some detail before the chapters on conventional, continuous, longwall and shortwall mining. Haulage and electric power in mines are included, as are chapters on surface mining, mine drainage, communication and lighting. Ten case-studies of underground mining systems are discussed. 70 references.

Stefanko, R.

1983-01-01T23:59:59.000Z

268

Proceedings, 26th international conference on ground control in mining  

Science Conference Proceedings (OSTI)

Papers are presented under the following topic headings: multiple-seam mining, surface subsidence, coal pillar, bunker and roadway/entry supports, mine design and highwall mining, longwall, roof bolting, stone and hardrock mining, rock mechanics and mine seal.

Peng, S.S.; Mark, C.; Finfinger, G. (and others) (eds.)

2007-07-01T23:59:59.000Z

269

California Agriculture: Dimensions and Issues  

E-Print Network (OSTI)

Agriculture 1959. California, Vol. 1, Part 48. ----------.of Population, California, Vol. 1, Part 6. ----------. 1990Vol. 12, No. 67, 1888. California Committee to Survey the

Siebert,, Jerome Editor

2003-01-01T23:59:59.000Z

270

Is there a grand challenge or X-prize for data mining?  

Science Conference Proceedings (OSTI)

This panel will discuss possible exciting and motivating Grand Challenge problems for Data Mining, focusing on bioinformatics, multimedia mining, link mining, text mining, and web mining. Keywords: X-prize, bioinformatics, data mining, grand challenge, image mining, link mining, multimedia mining, text mining, video mining, web mining

Gregory Piatetsky-Shapiro; Robert Grossman; Chabane Djeraba; Ronen Feldman; Lise Getoor; Mohammed Zaki

2006-08-01T23:59:59.000Z

271

Climate VISION: Private Sector Initiatives: Mining: Resources and Links -  

Office of Scientific and Technical Information (OSTI)

Software Tools Software Tools Mining Industry of the the Future Tools & Publications The Industrial Technologies Program offers a wide array of publications, videos, software, and other information products for improving energy efficiency in the mining industry. DOE BestPractices Software Tools DOE BestPractices offers a range of software tools and databases that help manufacturers assess their plant's steam, compressed air, motor, and process heating systems. DOE Plant Energy Profiler Industry experience has shown that many plant utility personnel do not have an adequate understanding of their energy cost structure and where the major focus should be for any energy savings program. This tool will address this need and enable an engineer assigned to a plant utility to

272

MST: Organizations: Precision Meso Manufacturing  

NLE Websites -- All DOE Office Websites (Extended Search)

Precision Meso Manufacturing Precision Meso Manufacturing Many engineers and product realization teams at Sandia National Laboratories are currently engaged in efforts to create revolutionary national security products that feature unprecedented functionality in ever-smaller, more portable configurations. In the course of development, the Sandia technology community has realized the need for manufacturing capabilities that expand upon what traditional microfabrication provides. The term “meso,” derived from the Greek mesos, meaning “intermediate” or “in the middle,” describes operations on a length scale that typically ranges from hundreds of micrometers to one centimeter. Meso Manufacturing involves a suite of innovative fabrication and metrology tools that compliment each other to make these products a reality. The Meso

273

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Survey Design, Survey Design, Implementation, and Estimates 411 Energy Information Administration/Manufacturing Consumption of Energy 1994 Overview of Changes from Previous Surveys Sample Design. The MECS has increased its sample size by roughly 40 percent since the 1991 survey, increasing the designed sample size from 16,054 establishments to 22,922. This increase in size and change in sampling criteria required a departure from using the Annual Survey of Manufactures (ASM) as the MECS sampling frame. For 1994, establishments were selected directly from the 1992 Census of Manufactures (CM) mail file, updated by 1993 ASM. Sample Frame Coverage. The coverage in the 1994 MECS is 98 percent of the manufacturing population as measured in total payroll. The sampling process itself provided that level of coverage, and no special adjustments were

274

Manufacturing Energy and Carbon Footprints  

E-Print Network (OSTI)

Significant opportunities exist for improving energy efficiency in U.S. manufacturing. A first step in realizing these opportunities is to identify how industry is using energy. Where does it come from? What form is it in? Where is it used? How much is lost? Answering these questions is the focus of this paper and the analysis described herein. Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions, for the fifteen most energy intensive manufacturing sectors, and for the entire U.S. manufacturing sector. Analysts and decision-makers utilize the footprints to better understand the distribution of energy use in energy-intensive industries and the accompanying energy losses. The footprints provide a benchmark from which to calculate the benefits of improving energy efficiency and for prioritizing opportunity analysis. A breakdown of energy consumption by energy type and end use allows for comparison both within and across sectors.

Brueske, S.; Lorenz, T.

2012-01-01T23:59:59.000Z

275

Manufacturing means jobs ? Mike Arms  

NLE Websites -- All DOE Office Websites (Extended Search)

investment in manufacturing since it was a sector generating not only high-paying direct jobs but also outstanding secondary jobs in supply-chain support and other related...

276

Manufacturing System Design Framework Manual  

E-Print Network (OSTI)

Previous Lean Aerospace Initiative research in factory operations had indicated that the greatest performance gains are realized when the manufacturing system is designed from the top down and from supplier to the customer. ...

Vaughn, Amanda

2002-01-01T23:59:59.000Z

277

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

S Y M n i 1 y 2 i (W i ) (W i 1) , Energy Information Administration, Manufacturing Energy Consumption Survey: Methodological Report 1985. Although this report describes 44...

278

Web Mining – the Ontology Approach  

E-Print Network (OSTI)

The World Wide Web today provides users access to extremely large number of Web sites many of which contain information of education and commercial values. Due to the unstructured and semi-structured nature of Web pages and the design idiosyncrasy of Web sites, it is a challenging task to develop digital libraries for organizing and managing digital content from the Web. Web mining research, in its last 10 years, has on the other hand made significant progress in categorizing and extracting content from the Web. In this paper, we represent ontology as a set of concepts and their inter-relationships relevant to some knowledge domain. The knowledge provided by ontology is extremely useful in defining the structure and scope for mining Web content. We will therefore review Web mining and describe the ontology approach to Web mining. The application of these Web mining techniques to digital library systems will also be discussed.

Ee-peng Lim; Aixin Sun

2006-01-01T23:59:59.000Z

279

Measuring mine roof bolt strains  

DOE Patents (OSTI)

A mine roof bolt and a method of measuring the strain in mine roof bolts of this type are disclosed. According to the method, a flat portion on the head of the mine roof bolt is first machined. Next, a hole is drilled radially through the bolt at a predetermined distance from the bolt head. After installation of the mine roof bolt and loading, the strain of the mine roof bolt is measured by generating an ultrasonic pulse at the flat portion. The time of travel of the ultrasonic pulse reflected from the hole is measured. This time of travel is a function of the distance from the flat portion to the hole and increases as the bolt is loaded. Consequently, the time measurement is correlated to the strain in the bolt. Compensation for various factors affecting the travel time are also provided.

Steblay, Bernard J. (Lakewood, CO)

1986-01-01T23:59:59.000Z

280

Manufacturing Laboratory (Fact Sheet), NREL (National Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

303-275-4311 Manufacturing Laboratory The Manufacturing Laboratory at NREL's Energy Systems Integration Facility (ESIF) focuses on developing methods and technologies that will...

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

2011 Next Generation Manufacturing Study 2011 Next ...  

Science Conference Proceedings (OSTI)

... well: 28% of manufacturers reported they were ... The NGM Study manufacturers report annual revenues ... 0.7% 0.5% Petroleum and Coal Products Mfg ...

282

NIST Workshop Seeks Manufacturers' Ideas on Using ...  

Science Conference Proceedings (OSTI)

... Workshop Seeks Manufacturers' Ideas on Using Multipurpose Robots. ... and where robots are used in manufacturing ... might make the best use of these ...

2013-05-15T23:59:59.000Z

283

Additive Manufacturing Cluster Strategy | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Additive Manufacturing Cluster Strategy SHARE Additive Manufacturing Cluster Strategy As the nation's premier research laboratory, ORNL is one of the world's most capable resources...

284

2012 Near Net Shape Manufacturing Workshop: Registration  

Science Conference Proceedings (OSTI)

Tours of the Quad City Manufacturing and Additive Laboratories and Rock Island Arsenal – Joint Manufacturing and Technology Center (JMTC) Date: Thursday ...

285

Advanced Manufacturing Office: State and Regional Partnerships  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Since 2002: EIA April 10, 2013 23.5 Million Investment in Innovative Manufacturing Projects Supports the New Clean Energy Manufacturing Initiative March 26, 2013 More News...

286

Remarks at the Massachusetts Advanced Manufacturing ...  

Science Conference Proceedings (OSTI)

... After a decade of losses, more than half a ... to establish a National Network for Manufacturing ... on "Next Generation Power Electronics Manufacturing ...

2013-07-09T23:59:59.000Z

287

American Wind Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Field Sites Power Marketing Administration Other Agencies You are here Home American Wind Manufacturing American Wind Manufacturing Addthis 1 of 9 Nordex USA -- a global...

288

China's Industrial Carbon Dioxide Emissions in Manufacturing...  

NLE Websites -- All DOE Office Websites (Extended Search)

China's Industrial Carbon Dioxide Emissions in Manufacturing Subsectors and in Selected Provinces Title China's Industrial Carbon Dioxide Emissions in Manufacturing Subsectors and...

289

Advanced Manufacturing Office: NewsDetail  

NLE Websites -- All DOE Office Websites (Extended Search)

Office: NewsDetail on Twitter Bookmark Advanced Manufacturing Office: NewsDetail on Google Bookmark Advanced Manufacturing Office: NewsDetail on Delicious Rank Advanced...

290

Advanced Manufacturing Office: MotorMaster+ International  

NLE Websites -- All DOE Office Websites (Extended Search)

on Twitter Bookmark Advanced Manufacturing Office: MotorMaster+ International on Google Bookmark Advanced Manufacturing Office: MotorMaster+ International on Delicious Rank...

291

Fact Sheet: 48C Manufacturing Tax Credits  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fact Sheet: 48C Manufacturing Tax Credits In order to foster investment and job creation in clean energy manufacturing, the American Recovery and Reinvestment Act of 2009 included...

292

Advanced Technology Vehicles Manufacturing Incentive Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program This is an interim final rule that establishes the...

293

Bio Solutions Manufacturing Inc | Open Energy Information  

Open Energy Info (EERE)

search Name Bio Solutions Manufacturing Inc Place Las Vegas, Nevada Zip 89103 Product Waste-to-energy bioremediation developer. References Bio Solutions Manufacturing Inc1...

294

2012 Near Net Shape Manufacturing Workshop: Home  

Science Conference Proceedings (OSTI)

2012 Near Net Shape Manufacturing Workshop April 11-13, 2012, iWireless Center, Moline, Illinois • USA. The 2012 Near Net Shape Manufacturing Workshop ...

295

High Performance Windows Volume Purchase: For Manufacturers  

NLE Websites -- All DOE Office Websites (Extended Search)

For Manufacturers to someone by E-mail Share High Performance Windows Volume Purchase: For Manufacturers on Facebook Tweet about High Performance Windows Volume Purchase: For...

296

U.S. DEPARTMENT OF COMMERCE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY MANUFACTURING EXTENSION PARTNERSHIP W W W . N I S T . G O V / M E P 1 -8 0 0 -M E P -4 M F G  

E-Print Network (OSTI)

decided to look for ways to contain costs, increase sales, and stimulate growth. In a manufacturing plant, handrails, mezzanines, and loading ramps. The company also provides very large fabrications for the power distribution, power generation, steel and coal mining industries. Like many small manufacturers, AIM saw its

Perkins, Richard A.

297

Electric Vehicle Manufacturing in Southern California: Current Developments, Future Prospects  

E-Print Network (OSTI)

Planning. UCLA. Motor Vehicles Manufacturers’ Association (Authority MVMA Motor Vehicle Manufacturer’s AssoemUon NaSneedsof electric vehicle manufacturers. Thesesectors include

Scott, Allen J.

1993-01-01T23:59:59.000Z

298

Clean Energy Manufacturing Initiative | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative July 10, 2013 - 1:52pm Addthis Boosting U.S. competitiveness in clean energy manufacturing Boosting U.S. competitiveness in clean energy manufacturing The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the Office of Energy Efficiency & Renewable Energy's (EERE) clean energy technology offices and Advanced Manufacturing Office, focusing on American competitiveness in clean energy manufacturing. alex was here Addthis Related Articles Manufacturing is the bedrock of the American economy, representing nearly 12 percent of our gross domestic product and providing good, high-paying jobs for middle class families. That's why the Energy Department is working to boost U.S. manufacturing competitiveness. | Photo courtesy of Alcoa.

299

Data Mining and Data Warehousing, July 31, 1999, NUS, Singapore Data Mining  

E-Print Network (OSTI)

Data Mining and Data Warehousing, July 31, 1999, NUS, Singapore 1 Welcome Data Mining from Large Email: xwu@ kais.mines.edu Home Page: http://kais.mines.edu/~xwu/ #12;Data Mining and Data Warehousing, July 31, 1999, NUS, Singapore 2 Outline s Why Large Databases? s How Large is "Very Large"? s Data

Wu, Xindong

300

Coal mining technology, economics and policy - 1984  

SciTech Connect

This book presents the papers given at the American Mining Congress International Coal Show held in 1984. Topics considered at the conference included coal preparation, environmental controls, longwall mining, management, safety, surface mining operations, underground mining operations, and US transportation and export policy.

Not Available

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Coal mining technology, economics and policy 1990  

SciTech Connect

The conference began with several presentations on the US coal energy policy and trends in the coal industry, including tax impacts and changes in environmental regulations. Technical topics included diesel exhaust emissions in underground mines; use of wetlands; occupational safety; land reclamation techniques; and advanced technologies for longwall mining, surface mining, and underground mining. Forty-two papers have been indexed separately.

Not Available

1990-01-01T23:59:59.000Z

302

Coal mining technology, economics and policy 1986  

SciTech Connect

This book presents the papers given at a conference on coal mining and coal preparation. Topics considered at the conference included fluidized-bed combustion, thermal drying, communications, environmental controls, ground subsidence with longwall mining, electric utilities, mine emergency planning, surface mining, dragline failures, rail transport, underground face operations, and remote seam mapping.

Not Available

1986-01-01T23:59:59.000Z

303

PEM Stack Manufacturing: Industry Status  

NLE Websites -- All DOE Office Websites (Extended Search)

© 2009 BALLARD POWER SYSTEMS INC. ALL RIGHTS RESERVED © 2009 BALLARD POWER SYSTEMS INC. ALL RIGHTS RESERVED JULY 2009 B U I L D I N G A C L E A N E N E R G Y G R O W T H C O M P A N Y B A L L A R D P O W E R S Y S T E M S PEM Stack Manufacturing: Industry Status Duarte R. Sousa, PE August 11, 2011 AUGUST 2009 P A G E 2 Overview of PEM Stack Manufacturing MEA Manufacturing Plate Manufacturing Stack Assembly Stack Conditioning and Testing Package and Ship For each of the four main processes, the following will be provided: 1. A brief history of where we have been; 2. Where we are today; 3. Where we would like to transition to; 4. Gaps and proposals. AUGUST 2009 P A G E 3 PEM Stack Manufacturing: Cost Overview * The MEA was readily identified as the major cost driver in a 10 kW stationary stack. * The precious metal catalyst electrode is the major cost driver for the MEA.

304

Photovoltaic manufacturing technology, Phase 1  

DOE Green Energy (OSTI)

This report describes subcontracted research by the Chronar Corporation, prepared by Advanced Photovoltaic Systems, Inc. (APS) for Phase 1 of the Photovoltaic Manufacturing Technology Development project. Amorphous silicon is chosen as the PV technology that Chronar Corporation and APS believe offers the greatest potential for manufacturing improvements, which, in turn, will result in significant cost reductions and performance improvements in photovoltaic products. The APS Eureka'' facility was chosen as the manufacturing system that can offer the possibility of achieving these production enhancements. The relationship of the Eureka'' facility to Chronar's batch'' plants is discussed. Five key areas are also identified that could meet the objectives of manufacturing potential that could lead to improved performance, reduced manufacturing costs, and significantly increased production. The projected long-term potential benefits of these areas are discussed, as well as problems that may impede the achievement of the hoped-for developments. A significant number of the problems discussed are of a generic nature and could be of general interest to the industry. The final section of this document addresses the cost and time estimates for achieving the solutions to the problems discussed earlier. Emphasis is placed on the number, type, and cost of the human resources required for the project.

Not Available

1992-10-01T23:59:59.000Z

305

Mining and Reclamation Technology Symposium  

SciTech Connect

The Mining and Reclamation Technology Symposium was commissioned by the Mountaintop Removal Mining/Valley Fill Environmental Impact Statement (EIS) Interagency Steering Committee as an educational forum for the members of the regulatory community who will participate in the development of the EIS. The Steering Committee sought a balanced audience to ensure the input to the regulatory community reflected the range of perspectives on this complicated and emotional issue. The focus of this symposium is on mining and reclamation technology alternatives, which is one of eleven topics scheduled for review to support development of the EIS. Others include hydrologic, environmental, ecological, and socio-economic issues.

None Available

1999-06-24T23:59:59.000Z

306

Interactive mining of high utility patterns over data streams  

Science Conference Proceedings (OSTI)

High utility pattern (HUP) mining over data streams has become a challenging research issue in data mining. When a data stream flows through, the old information may not be interesting in the current time period. Therefore, incremental HUP mining is ... Keywords: Data mining, Data streams, High utility pattern mining, Incremental mining, Interactive mining, Knowledge discovery

Chowdhury Farhan Ahmed; Syed Khairuzzaman Tanbeer; Byeong-Soo Jeong; Ho-Jin Choi

2012-11-01T23:59:59.000Z

307

A Review of Operations Research in Mine Planning  

Science Conference Proceedings (OSTI)

Applications of operations research to mine planning date back to the 1960s. Since that time, optimization and simulation, in particular, have been applied to both surface and underground mine planning problems, including mine design, long-and short-term ... Keywords: dispatching, equipment selection, literature review, mine design, mine planning, open-pit mining, optimization, production scheduling, simulation, underground mining

Alexandra M. Newman; Enrique Rubio; Rodrigo Caro; Andrés Weintraub; Kelly Eurek

2010-05-01T23:59:59.000Z

308

Differentiating data- and text-mining terminology  

Science Conference Proceedings (OSTI)

When a new discipline emerges it usually takes some time and lots of academic discussion before concepts and terms get standardised. Such a new discipline is text mining. In a groundbreaking paper, Untangling text data mining, ... Keywords: IR, KDD, TDM, algorithms, database queries, documentation, full-text retrieval, information retrieval, knowledge creation, knowledge discovery, knowledge management, languages, measurement, metadata, text data mining, text mining, text-mining, theory

Jan H. Kroeze; Machdel C. Matthee; Theo J. D. Bothma

2003-09-01T23:59:59.000Z

309

Oil shale mining and the environment. [Colorado  

SciTech Connect

Experimental mining of oil shale, to date, has been conducted only in the shallow Mahogany Zone and has utilized only the room and pillar mining method. The U.S. Bureau of Mines is planning a demonstration mine in the deep, thick oil-shale deposits in Colorado. This study describes the 4 mining concepts that are planned for demonstration and the interrelationship of these concepts and the environment. The environmental aspects of oil-shale development also are discussed.

Rajaram, V.; Kauppila, T.A.; Bolmer, R.L.

1977-01-01T23:59:59.000Z

310

Agriculture and the greenhouse effect  

SciTech Connect

This article discusses research of the US Department of Agriculture's Agricultural Research Service and the US Department of Energy's Carbon Dioxide Research Division to anticipate the effects of increased atmospheric carbon dioxide on American agriculture. Experiments involving exposure of plants to elevated CO/sub 2/ and attempts to model the productivity of crops as atmospheric CO/sub 2/ increases are described. The scientists quoted in the article are optimistic, emphasizing the beneficial effects of the elevated CO/sub 2/ on crops and speculating that problems caused by associated climate changes can be accommodated by movement of crop regions and by introduction of new varieties.

1988-03-01T23:59:59.000Z

311

Innovative Manufactured Housing Urban Design Demonstration Project  

Science Conference Proceedings (OSTI)

One quarter of the new houses sold in the United States in 1999 were manufactured homes, and manufactured housing represents an important and growing market for power producers. One niche market opportunity for manufactured homes is in urban areas. EPRI facilitated the completion of two limited demonstrations of energy efficient manufactured homes designed specifically for urban neighborhoods.

2000-10-05T23:59:59.000Z

312

The Advanced Manufacturing Jobs and Innovation Accelerator ...  

Science Conference Proceedings (OSTI)

Page 1. Advanced Manufacturing Jobs and Innovation Accelerator Challenge – Application Guide & Document Checklist 1 of 4 ...

2012-06-26T23:59:59.000Z

313

Establishing Greener Products and Manufacturing Processes  

E-Print Network (OSTI)

energy monitoring of machine tools,” CIRP Annals - Manufacturing INTERNATIONAL JOURNAL OF PRECISION ENGINEERING

Linke, Barbara; Huang, Yu-Chu; Dornfeld, David

2012-01-01T23:59:59.000Z

314

Inverter Controlled Screw Air Compressor Manufacturers ...  

U.S. Energy Information Administration (EIA)

Inverter Controlled Screw Air Compressor, Inverter Controlled Screw Air Compressor Manufacturers & Suppliers Directory - Find here Inverter ...

315

Topic 2: Extremely Efficient & Effective Manufacturing  

Science Conference Proceedings (OSTI)

... without formal training in engineering.” • “If (high performance computing is) shared throughout the entire manufacturing ...

2013-06-11T23:59:59.000Z

316

Manufacturing Consumption of Energy 1994  

Gasoline and Diesel Fuel Update (EIA)

Energy Information Administration/Manufacturing Consumption of Energy 1994 Energy Information Administration/Manufacturing Consumption of Energy 1994 Introduction The market for natural gas has been changing for quite some time. As part of natural gas restructuring, gas pipelines were opened to multiple users. Manufacturers or their representatives could go directly to the wellhead to purchase their natural gas, arrange the transportation, and have the natural gas delivered either by the local distribution company or directly through a connecting pipeline. More recently, the electricity markets have been undergoing change. When Congress passed the Energy Policy Act of 1992, requirements were included not only to open access to the ownership of electricity generation, but also to open access to the transmission lines so that wholesale trade in electricity would be possible. Now several States, including California and

317

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Ion Beam Manufacture Ion Beam Manufacture PDF format (113 kb) Example sine wave FIB sputtered into initially planar Si substrate Example sine wave FIB sputtered into initially planar Si substrate Sandia Manufacturing Science & Technology's Focused Ion Beam (FIB) laboratory provides an opportunity for research, development and prototyping. Currently, our scientists are developing methods for ion beam sculpting microscale tools, components and devices. This includes shaping of specialty tools such as end-mills, turning tools and indenters. Many of these have been used in ultra-precision machining DOE applications. Additionally, staff are developing the capability to ion mill geometrically-complex features and substrates. This includes the ability to sputter predetermined curved shapes of various symmetries and

318

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Manufacturing Manufacturing Energy Consumption Survey Forms Form EIA-846A (4-6-95) U.S. Department of Commerce Bureau of the Census Acting as Collecting and Compiling Agent For 1994 MANUFACTURING ENERGY CONSUMPTION SURVEY Public reporting burden for this collection of information is estimated to average 9 hours per response, including the time of reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Energy Information Administration, Office of Statistical Standards, EI-73, 1707 H-Street, NW, Washington, DC 20585; and to the Office of Information and Regulatory Affairs, Office of

319

Manufacturing Services | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Services Services Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing Services Do you have a new idea? You may need to file a patent to both develop it and protect it. Find out more below. Search for existing patents Apply for a patent Business Owners Getting a business started, established, and growing is difficult. We want to make that easier. Check out the government services below that are available to businesses, and find out more about what's coming with StartUp America. Start a business Access financing Find opportunities to sell products and services to the government Grow your business Help with exporting for beginners and for experts. Shared Facilities Facilities can be a huge factor in whether you create a new product or

320

"S" Glass Manufacturing Technology Transfer  

SciTech Connect

A glass-ceramic-to metal sealing technology patented by Sandia National Laboratories, Albuquerque (SNLA) was developed by MRC-Mound for use in the manufacture of weapon components. Successful implementation attracted increasingly widespread weapon use of this technology. "S-glass" manufacturing technology was transferred to commercial vendors to ensure that weapons production schedules would be met in the coming years. Such transfer also provided sources of this fledgling technology for the Department of Defense (DOD), aerospace and other commercial uses. The steps involved in the technology transfer are described, from the initial cooperative development work of Sandia and Mound scientists and technologists to the final phase of qualifying commercial vendors for component manufacture.

Buckner, Dean, A.; McCollister, Howard, L.

1988-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Manufacturing Spotlight: Boosting American Competitiveness | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing Spotlight: Boosting American Competitiveness Manufacturing Spotlight: Boosting American Competitiveness Manufacturing Spotlight: Boosting American Competitiveness January 6, 2014 - 1:06pm Addthis Libby Wayman Clean Energy Manufacturing Initiative Director Advancing the nation's clean energy manufacturing industry helps to capture the value of U.S. innovation in clean energy technologies, fosters further innovation right here in America, and makes U.S. manufacturers more competitive by reducing their energy costs - all while creating jobs and building a more sustainable planet for future generations. Industry and government are working together to expand American leadership in this sector by bringing new clean energy technologies to the marketplace and making manufacturing processes more energy efficient.

322

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network (OSTI)

that convert hydrogen into electric energy, (2) hydrogen storage systems, and (3) large-scale hydrogen of a hydrogen energy economy, moving from today's laboratory-scale fabrication technologies to high and prioritize topics for public-private R&D on manufacturing hydrogen storage system components. Scope

323

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Thin Films Thin Films PDF format (189 kb) Multi Layer Thin Films Multi Layer Thin Films Planetary Sputtering SystemsPlanetary Sputtering Systems Planetary Sputtering Systems The Thin Film laboratory within Manufacturing Science & Technology provides a variety of vapor deposition processes and facilities for cooperative research and development. Available capabilities include electron beam evaporation, sputter deposition, reactive deposition processes, atomic layer deposition (ALD) and specialized techniques such as focused ion beam induced chemical vapor deposition. Equipment can be reconfigured for prototyping or it can be dedicated to long-term research, development and manufacturing. Most sputter and evaporative deposition systems are capable of depositing multiple materials.

324

Advancing manufacturing through computational chemistry  

SciTech Connect

The capabilities of nanotechnology and computational chemistry are reaching a point of convergence. New computer hardware and novel computational methods have created opportunities to test proposed nanometer-scale devices, investigate molecular manufacturing and model and predict properties of new materials. Experimental methods are also beginning to provide new capabilities that make the possibility of manufacturing various devices with atomic precision tangible. In this paper, we will discuss some of the novel computational methods we have used in molecular dynamics simulations of polymer processes, neural network predictions of new materials, and simulations of proposed nano-bearings and fluid dynamics in nano- sized devices.

Noid, D.W.; Sumpter, B.G.; Tuzun, R.E.

1995-12-31T23:59:59.000Z

325

EVA for Small Manufacturing Companies  

E-Print Network (OSTI)

This paper examines introducing Economic Value Added as a performance measure for small manufacturing companies. Advantages and disadvantages of using Economic Value Added as a primary measure of performance as compared to sales, revenues, earnings, operating profit, profit after tax, and profit margin are investigated. The Economic Value Added calculation using data from a small company’s income and balance sheet statements is illustrated. Necessary adjustments to these financial statements, that are typical for a small company, are demonstrated to prepare the data for the Economic Value Added determination. Finally, potential improvement opportunities resulting from using Economic Value Added as a performance measure in small manufacturing companies are discussed.

Narcyz Roztocki; Kim Lascola Needy

1999-01-01T23:59:59.000Z

326

Plastic Product Manufacturing (NAICS 3261)  

Science Conference Proceedings (OSTI)

The U.S. plastics product manufacturing industry (NAICS 3261), which consists of more than 12,000 firms with combined annual revenues of about $170 billion, is one of the ten largest manufacturing industries in the country in terms of sales. A large amount of electricity is consumed by the plastics products industry, with more than half of their usage going to machine drives; therefore, it is with motors and drives that the greatest opportunities for energy savings lie. Several electric technology option...

2012-01-31T23:59:59.000Z

327

Method for manufacturing glass frit  

SciTech Connect

A method of manufacturing a glass frit for use in the manufacture of uniform glass microspheres to serve as containers for laser fusion fuel to be exposed to laser energy which includes the formation of a glass gel which is then dried, pulverized, and very accurately sized to particles in a range of, for example, 125 to 149 micrometers. The particles contain an occluded material such as urea which expands when heated. The sized particles are washed, dried, and subjected to heat to control the moisture content prior to being introduced into a system to form microspheres.

Budrick, Ronald G. (Ann Arbor, MI); King, Frank T. (Hillsboro, OR); Nolen, Jr., Robert L. (Ann Arbor, MI); Solomon, David E. (Ann Arbor, MI)

1977-01-01T23:59:59.000Z

328

Renewable Agricultural Energy | Open Energy Information  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon Renewable Agricultural Energy Jump to: navigation, search Name Renewable Agricultural Energy...

329

Press Conference Call Tomorrow: Agriculture Secretary Vilsack...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Energy Secretary Chu to Discuss Efforts to Reduce U.S. Oil Dependence Press Conference Call Tomorrow: Agriculture...

330

Sustainable Agriculture Network | Open Energy Information  

Open Energy Info (EERE)

"Sustainable Agriculture Network" Retrieved from "http:en.openei.orgwindex.php?titleSustainableAgricultureNetwork&oldid312235" Categories: Clean Energy Organizations...

331

Three ACE awards for California Agriculture  

E-Print Network (OSTI)

Editor Janet White accepted the awards during the 2012 ACEa noxious weed. Three ACE awards for California AgricultureAgriculture team has won three awards from the Association

Editors, by

2012-01-01T23:59:59.000Z

332

Energy Secretary Chu, Agriculture Secretary Vilsack Announce...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chu, Agriculture Secretary Vilsack Announce 6.3 million for Biofuels Research Energy Secretary Chu, Agriculture Secretary Vilsack Announce 6.3 million for Biofuels Research July...

333

Coal Mining Reclamation (North Dakota)  

Energy.gov (U.S. Department of Energy (DOE))

The Reclamation Division of the Public Service Commission is tasked with administering the regulation of surface coal mining and reclamation. Specific regulations can be found in article 69-05.2 of...

334

Taxonomy-superimposed graph mining  

Science Conference Proceedings (OSTI)

New graph structures where node labels are members of hierarchically organized ontologies or taxonomies have become commonplace in different domains, e.g., life sciences. It is a challenging task to mine for frequent patterns in this new graph model ...

Ali Cakmak; Gultekin Ozsoyoglu

2008-03-01T23:59:59.000Z

335

Mining outliers in spatial networks  

Science Conference Proceedings (OSTI)

Outlier analysis is an important task in data mining and has attracted much attention in both research and applications. Previous work on outlier detection involves different types of databases such as spatial databases, time series databases, biomedical ...

Wen Jin; Yuelong Jiang; Weining Qian; Anthony K. H. Tung

2006-04-01T23:59:59.000Z

336

School of Mines Undergraduate Bulletin  

E-Print Network (OSTI)

of Courses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Chemical Engineering Wide Web address: http://www.mines.edu/ Academic department and division telephone numbers are Chemical fields related to uthe discovery and recovery of the Earth's resources, u their conversion to materials

337

Mining Conveyor Systems Marketing Kit  

Science Conference Proceedings (OSTI)

These conveyor-systems marketing guidelines are aimed at utility sales and marketing personnel who wish to call on customers who currently mine various minerals, but have limited expertise in the use of conveyor systems.

1999-10-19T23:59:59.000Z

338

Proceedings, 27th international conference on ground control in mining  

Science Conference Proceedings (OSTI)

Topics covered include: coal bumps and rockbursts, surface subsidence, surface mining, mine seals, longwall mining, pillars, roof bolting, rock mechanics and standing supports.

Peng, S.S.; Mark, C.; Finfinger, G. (and others) (eds.)

2008-07-01T23:59:59.000Z

339

MODELING OF STATIC MINING SUBSIDENCE IN A NONLINEAR MEDIUM  

E-Print Network (OSTI)

Static Evaluation of Mining Subsidence," Rep. No. LBL-11356,MODELING OF STATIC MINING SUBSIDENCE IN A NONLINEAR MEDIUMMODELING OF STATIC MINING SUBSIDENCE IN A NONLINEAR ~lliDIUM

Ratigan, J.L.

2013-01-01T23:59:59.000Z

340

Opportunities to Reduce Energy and Water Intensity of Mining ...  

Science Conference Proceedings (OSTI)

Presentation Title, Opportunities to Reduce Energy and Water Intensity of Mining ... bearing on the value of mining projects and the image of the mining industry; ...

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Data mining to improve industrial standards and enhance production and marketing: An empirical study in apparel industry  

Science Conference Proceedings (OSTI)

Apparel production is a high value-added industry in the global textile manufacturing chain. Standard size charts are crucial industrial standards for high-tech apparel industries to maintain competitive advantages in knowledge economy era. However, ... Keywords: Apparel industry, Cluster analysis, Data mining, Industrial standards, Production management and marketing

Chih-Hung Hsu

2009-04-01T23:59:59.000Z

342

Wind Powering America: Agricultural Podcasts  

Wind Powering America (EERE)

agricultural/podcasts.asp A series of agricultural/podcasts.asp A series of radio interviews on wind energy aimed at a rural stakeholder audience produced by Wind Powering America and the National Association of Farm Broadcasters. en-us julie.jones@nrel.gov (Julie Jones) http://www.windpoweringamerica.gov/images/wpa_logo_sm.jpg Wind Powering America: Agricultural Podcasts http://www.windpoweringamerica.gov/agricultural/podcasts.asp Wind Energy Forum Enhances Positives of Wind Production http://www.windpoweringamerica.gov/filter_detail.asp?itemid=4043 http://www.windpoweringamerica.gov/filter_detail.asp?itemid=4043 Thu, 14 Nov 2013 00:00:00 MST Rural Communities Benefit from Wind Energy's Continued Success http://www.windpoweringamerica.gov/filter_detail.asp?itemid=4021 http://www.windpoweringamerica.gov/filter_detail.asp?itemid=4021 Tue, 29

343

Agricultural Carbon Mitigation in Europe  

NLE Websites -- All DOE Office Websites (Extended Search)

Agricultural Carbon Mitigation in Europe Agricultural Carbon Mitigation in Europe Agricultural Carbon Mitigation in Europe Smith P, Powlson DS, Smith JU, Falloon P, and Coleman K. 2000. Meeting Europe's climate change commitments: Quantitative estimates of the potential for carbon mitigation by agriculture. Global Climate Change 6:525-539. Abstract Under the Kyoto Protocol, the European Union is committed to a reduction in CO2 emissions to 92% of baseline (1990) levels during the first commitment period (2008-2012). The Kyoto Protocol allows carbon emissions to be offset by demonstrable removal of carbon from the atmosphere. Thus, land-use / land-management change and forestry activities that are shown to reduce atmospheric CO2 levels can be included in the Kyoto targets. These activities include afforestation, reforestation and deforestation (article

344

Multiplex detection of agricultural pathogens  

DOE Patents (OSTI)

Described are kits and methods useful for detection of seven agricultural pathogens (BPSV; BHV; BVD; FMDV; BTV; SVD; and VESV) in a sample. Genomic sequence information from 7 agricultural pathogens was analyzed to identify signature sequences, e.g., polynucleotide sequences useful for confirming the presence or absence of a pathogen in a sample. Primer and probe sets were designed and optimized for use in a PCR based, multiplexed Luminex assay to successfully identify the presence or absence of pathogens in a sample.

McBride, Mary Teresa (Brentwood, CA); Slezak, Thomas Richard (Livermore, CA); Messenger, Sharon Lee (Kensington, CA)

2010-09-14T23:59:59.000Z

345

Multiplex detection of agricultural pathogens  

DOE Patents (OSTI)

Described are kits and methods useful for detection of agricultural pathogens in a sample. Genomic sequence information from agricultural pathogens was analyzed to identify signature sequences, e.g., polynucleotide sequences useful for confirming the presence or absence of a pathogen in a sample. Primer and probe sets were designed and optimized for use in a PCR based, multiplexed Luminex assay and/or an array assay to successfully identify the presence or absence of pathogens in a sample.

Siezak, Thomas R.; Gardner, Shea; Torres, Clinton; Vitalis, Elizabeth; Lenhoff, Raymond J.

2013-01-15T23:59:59.000Z

346

ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry (December 2002)  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Energy and the National Mining Association are working in partnership to implement the Mining Industry of the Future strategy.

347

Alternative Fuels Data Center: Clean Agriculture USA  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Clean Agriculture USA Clean Agriculture USA to someone by E-mail Share Alternative Fuels Data Center: Clean Agriculture USA on Facebook Tweet about Alternative Fuels Data Center: Clean Agriculture USA on Twitter Bookmark Alternative Fuels Data Center: Clean Agriculture USA on Google Bookmark Alternative Fuels Data Center: Clean Agriculture USA on Delicious Rank Alternative Fuels Data Center: Clean Agriculture USA on Digg Find More places to share Alternative Fuels Data Center: Clean Agriculture USA on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Clean Agriculture USA Clean Agriculture USA is a voluntary program that promotes the reduction of diesel exhaust emissions from agricultural equipment and vehicles by encouraging proper operations and maintenance by farmers, ranchers, and

348

Process for manufacturing multilayer capacitors  

DOE Patents (OSTI)

The invention is directed to a method of manufacture of multilayer electrical components, especially capacitors, and components made by such a method. High capacitance dielectric materials and low cost metallizations layered with such dielectrics may be fabricated as multilayer electrical components by sintering the metallizations and the dielectrics during the fabrication process by application of microwave radiation.

Lauf, Robert J. (Oak Ridge, TN); Holcombe, Cressie E. (Knoxville, TN); Dykes, Norman L. (Oak Ridge, TN)

1996-01-01T23:59:59.000Z

349

Heat treating of manufactured components  

DOE Patents (OSTI)

An apparatus for heat treating manufactured components using microwave energy and microwave susceptor material is disclosed. The system typically includes an insulating vessel placed within a microwave applicator chamber. A moderating material is positioned inside the insulating vessel so that a substantial portion of the exterior surface of each component for heat treating is in contact with the moderating material.

Ripley, Edward B. (Knoxville, TN)

2012-05-22T23:59:59.000Z

350

Process for manufacturing multilayer capacitors  

DOE Patents (OSTI)

The invention is directed to a method of manufacture of multilayer electrical components, especially capacitors, and components made by such a method. High capacitance dielectric materials and low cost metallizations layered with such dielectrics may be fabricated as multilayer electrical components by sintering the metallizations and the dielectrics during the fabrication process by application of microwave radiation. 4 figs.

Lauf, R.J.; Holcombe, C.E.; Dykes, N.L.

1996-01-02T23:59:59.000Z

351

Free membership Agriculture Alzheimer Astronomy  

E-Print Network (OSTI)

'Guessan Results: At a former uranium mine site in Colorado, researchers have found a surprising process geophysics Browse Articles Category: All Articles Better Bioremediation at Uranium Mill Tailings Site Published on 16 February 2009, 08:42 Last Update: 11 hour(s) ago by Insciences Tags: Uranium U

Lovley, Derek

352

Food and paper account for 3.4% of nation’s energy use - Today ...  

U.S. Energy Information Administration (EIA)

The industrial sector, which encompasses manufacturing, mining, agriculture, and construction, is responsible for nearly a third of total energy use in the United States.

353

Government Regulation of Environmental and Occupational Health in the Environment in the United States and the European Union  

E-Print Network (OSTI)

The manufacturing, processing, and use of chemicals, materials, tools, machinery, and equipment in industrial, construction, mining, and agricultural workplaces often cause environmental, health, and safety hazards and ...

Caldart, Charles

2010-01-01T23:59:59.000Z

354

List of Manufacturing Groups Displayed in the 1998 Manufacturing Energy  

U.S. Energy Information Administration (EIA) Indexed Site

21 manufacturing subsectors (3-digit NAICS codes); 21 manufacturing subsectors (3-digit NAICS codes); 311 Food 312 Beverage and Tobacco Products 313 Textile Mills 314 Textile Product Mills 315 Apparel 316 Leather and Allied Products 321 Wood Products 322 Paper 323 Printing and Related Support 324 Petroleum and Coal Products 325 Chemicals 326 Plastics and Rubber Products 327 Nonmetallic Mineral Products 331 Primary Metals 332 Fabricated Metal Products 333 Machinery 334 Computer and Electronic Products 335 Electrical Equip., Appliances, and Components 336 Transportation Equipment 337 Furniture and Related Products 339 Miscellaneous 6 industry groups (4-digit NAICS codes); 3212 Veneer, Plywood, and Engineered Woods 3219 Other Wood Products 3272 Glass and Glass Products 3312 Steel Products from Purchased Steel 3313 Alumina and Aluminum

355

Large mining blasts from the Kursk Mining Region, Russia  

SciTech Connect

Monitoring the Comprehensive Nuclear Test Ban Treaty (CTBT) by seismic means will require identification of seismic sources at magnitude levels where industrial explosions (primarily, mining blasts) may comprise a significant fraction of the total number of events recorded, and may for some countries dominate the seismicity. Thus, data on blasting practice have both political significance for the negotiation of treaties involving seismic monitoring of nuclear tests, and operational applications in terms of establishing monitoring and inspection needs on a mine-by-mine basis. While it is generally accepted that mining explosions contribute to seismicity at lower seismic magnitudes (less than about magnitude 3.5), the rate of mining seismicity as a function of seismic magnitude is unknown for most countries outside the U.S. This results in a large uncertainty when estimating the task of discriminating nuclear explosions from chemical explosions and earthquakes, by seismic means, under a comprehensive nuclear test ban. This uncertainty directly affects estimates of seismic network enhancements required to achieve treaty verification requirements at magnitudes less than about 3.5. 24 refs., 64 figs., 11 tabs.

Leith, W. Adushkin, V.; Spivak, A.

1997-01-01T23:59:59.000Z

356

Coal Mining Regulations (Kentucky) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Coal Mining Regulations (Kentucky) Coal Mining Regulations (Kentucky) Coal Mining Regulations (Kentucky) < Back Eligibility Commercial Construction Developer Industrial Investor-Owned Utility Retail Supplier Program Info State Kentucky Program Type Environmental Regulations Siting and Permitting Provider Kentucky Department for Energy Development and Independence Kentucky Administrative Regulation Title 405 chapters 1, 2, 3, 5, 7, 8, 10, 12, 16, 18 and 20 establish the laws governing coal mining in the state. The Department of Natural Resources under the authority of the Energy and Environment Cabinet is responsible for enforcing these laws and assuring compliance with the 1977 Federal Surface Mining Control Act (SMCRA). The Division of Mine Reclamation and Enforcement is responsible for inspecting

357

Soap Manufacturing TechnologyChapter 12 Manufacture of Multicolored and Multicomponent Soaps  

Science Conference Proceedings (OSTI)

Soap Manufacturing Technology Chapter 12 Manufacture of Multicolored and Multicomponent Soaps Surfactants and Detergents eChapters Surfactants - Detergents Press Downloadable pdf of\tChapter 12 Manufacture of Mult

358

Proceedings, 24th international conference on ground control in mining  

Science Conference Proceedings (OSTI)

Topics covered: longwall mining; multiple seam mining; pillar/pillar extraction; surface subsidence; roof falls; geology; high horizontal stresses; highwall mining/slope stability; mine/roof support design; roof bolting; and detection of ground conditions.

Peng, S.S.; Mark, C.; Finfinger, G.; Tadolini, S.; Wahab Khair, A.; Heasley, K. (eds.) [West Virginia University, Morgantown, WV (United States)

2005-07-01T23:59:59.000Z

359

TX-100 manufacturing final project report.  

DOE Green Energy (OSTI)

This report details the work completed under the TX-100 blade manufacturing portion of the Carbon-Hybrid Blade Developments: Standard and Twist-Coupled Prototype project. The TX-100 blade is a 9 meter prototype blade designed with bend-twist coupling to augment the mitigation of peak loads during normal turbine operation. This structural coupling was achieved by locating off axis carbon fiber in the outboard portion of the blade skins. The report will present the tooling selection, blade production, blade instrumentation, blade shipping and adapter plate design and fabrication. The baseline blade used for this project was the ERS-100 (Revision D) wind turbine blade. The molds used for the production of the TX-100 were originally built for the production of the CX-100 blade. The same high pressure and low pressure skin molds were used to manufacture the TX-100 skins. In order to compensate for the difference in skin thickness between the CX-100 and the TX-100, however, a new TX-100 shear web plug and mold were required. Both the blade assembly fixture and the root stud insertion fixture used for the CX-100 blades could be utilized for the TX-100 blades. A production run of seven TX-100 prototype blades was undertaken at TPI Composites during the month of October, 2004. Of those seven blades, four were instrumented with strain gauges before final assembly. After production at the TPI Composites facility in Rhode Island, the blades were shipped to various test sites: two blades to the National Wind Technology Center at the National Renewable Energy Laboratory in Boulder, Colorado, two blades to Sandia National Laboratory in Albuquerque, New Mexico and three blades to the United States Department of Agriculture turbine field test facility in Bushland, Texas. An adapter plate was designed to allow the TX-100 blades to be installed on existing Micon 65/13M turbines at the USDA site. The conclusion of this program is the kick-off of the TX-100 blade testing at the three testing facilities.

Ashwill, Thomas D.; Berry, Derek S. (TPI Composites, Inc., Warren, RI)

2007-11-01T23:59:59.000Z

360

Explore Careers in Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Careers in Manufacturing Careers in Manufacturing Explore Careers in Manufacturing About the Advanced Manufacturing Office The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous improvement in corporate energy management to bring about a transformation in U.S. manufacturing. Image of scientists examining an experiment. back to top What types of jobs are available? Innovation Process Design & Development Engineers Mechanical Electrical Chemical Biochemical Health Safety Environmental Scientists Materials Computer Automation Software Energy Storage Production Engineers Industrial systems Process Materials Equipment Controls Supply Chain Logistics Quality Control Maintenance, Installation & Repair Machinists Efficient Use

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Secure Manufacturing | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Secure Secure Manufacturing Secure Manufacturing The depth and breadth of Y-12's manufacturing capabilities and expertise enable Y-12 to address current and emerging national security challenges by providing leadership and direction to perform the following activities: solving unique, high-risk manufacturing problems; eliminating the most difficult manufacturability and development obstacles; protecting classified and proprietary materials, components, and information; developing unique technologies to optimize manufacturing and systems performance; and executing projects cost effectively and with timeliness. Y-12 accomplishes this mission to meet the national security challenges of today and those of the future, with capability and expertise in the following areas:

362

Batteries - Materials Processing and Manufacturing Breakout session  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Processing and Manufacturing Materials Processing and Manufacturing Breakout Session #1 - Discussion of Performance Targets and Barriers Comments on the Achievability of the Targets * PHEV40 and AEV 100 possible with success in current R&D * Achievable with Li-ion manufacturing improvements and advanced chemistries in current Li-ion R&D * AEV300 more challenging * Requires manufacturing improvements and materials and chemistry improvements * Quantify benefits/ drawbacks of fast charging vs. increased electrode cost Barriers Interfering with Reaching the Targets * Materials cost * Need: Material synthesis in large quantities/ with increased impurities and broader size distributions or advanced manufacturing * Electrode thickness - manufacturing and performance * Separator cost/ performance/ safety

363

MST: Organizations: Manufacturing Processes & Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Processing Manufacturing Processing Manufacturing Process, Science, and Technology Mark Smith Mark Smith, Senior Manager Manufacturing Process Science and Technology conducts research and development on advanced manufacturing process and materials technologies. It provides manufacturing process development, technical consulting, and technology transfer to support Sandia product realization needs. This organization also provides prototype fabrication and specialized production services, as required, to support Sandia missions. Departments Dianna Blair Mike Kelly Alex Roesler Paul C. McKey Thin Film, Vacuum, and Packaging Organic Materials Ceramics and Glass Meso Mfg. and System Development Dianna Blair, Manager Mike Kelly, Manager Alex Roesler, Manager Paul C. McKey,

364

Manufacturers' View on Benchmarking and Disclosure  

U.S. Energy Information Administration (EIA) Indexed Site

Association of Electrical and Association of Electrical and Medical Imaging Equipment Manufacturers Manufacturing Solutions for Energy Efficiency in Buildings Patrick Hughes Policy Director, High Performance Buildings National Electrical Manufacturers Association The Association of Electrical and Medical Imaging Equipment Manufacturers What is NEMA? The Association of Electrical Equipment and Medical Imaging Manufacturers Which policies encourage energy efficiency in buildings? Energy Savings Performance Contracts Tax Incentives Shaheen- Portman Benchmarking and Disclosure Bullitt Center Seattle, Washington The Association of Electrical Equipment and Medical Imaging Manufacturers Energy Savings Performance Contracts ESPCs pay for efficiency upgrades with

365

Advanced Manufacturing Office: Industrial Assessment Centers (IACs)  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Assessment Industrial Assessment Centers (IACs) to someone by E-mail Share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Facebook Tweet about Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Twitter Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Google Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Delicious Rank Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Digg Find More places to share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on AddThis.com... Industrial Assessment Centers (IACs) Learn More Learn how companies have benefited from IAC assessments. Search the IAC Database for recommendations and savings achieved.

366

Manufacturing  

Science Conference Proceedings (OSTI)

... Report 91-4626, June, 1991. - 15 - September 5, 1991 time_t(seconds) timeval(sec,usec) time gettimeofday OS localtime gmtimelocaltime ctime ...

1993-07-26T23:59:59.000Z

367

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

2(94) 2(94) Distribution Category UC-950 Manufacturing Consumption of Energy 1994 December 1997 Energy Information Administration Office of Energy Markets and End Use U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the U.S. Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. ii Energy Information Administration/Manufacturing Consumption of Energy 1994 Contacts This publication was prepared by the Energy Information Administration (EIA) under the general direction of W. Calvin

368

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

E E U.S. Census Regions and Divisions 489 Energy Information Administration/Manufacturing Consumption of Energy 1994 Source: U.S. Department of Commerce, Bureau of the Census, Statistical Abstract of the United States,1996 (Washington, DC, October 1996), Figure 1. Appendix E U.S. Census Regions and Divisions Appendix F Descriptions of Major Industrial Groups and Selected Industries Executive Office of the President, Office of Management and Budget, Standard Industrial Classification Manual, 1987, pp. 67-263. 54 493 Energy Information Administration/Manufacturing Consumption of Energy 1994 Appendix F Descriptions of Major Industrial Groups and Selected Industries This appendix contains descriptions of industrial groups and selected industries taken from the Standard Industrial

369

Photovoltaic manufacturing technology, Phase 1  

DOE Green Energy (OSTI)

This report examines manufacturing multiple-band-gap, multiple- junction solar cells and photovoltaic modules. Amorphous silicon alloy material is deposited (using microwave plasma-assisted chemical vapor deposition) on a stainless-steel substrate using a roll-to-roll process that is continuous and automated. Rapid thermal equilibration of the metal substrate allows rapid throughput of large-area devices in smaller production machines. Potential improvements in the design, deposition, and module fabrication process are described. Problems are also discussed that could impede using these potential improvements. Energy Conversion Devices, Inc. (ECD) proposes cost and time estimates for investigating and solving these problems. Manufacturing modules for less than $1.00 per peak watt and stable module efficiencies of greater than 10% are near-term goals proposed by ECD. 18 refs.

Izu, M. (Energy Conversion Devices, Inc., Troy, MI (United States))

1992-03-01T23:59:59.000Z

370

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Meso-Machining Meso-Machining PDF format (182 kb) Sandia's Micro-Electro Discharge Machine (Micro-EDM) (above). On the upper right inset is the Micro-EDM electode in copper that was made with the LIGA (electroforming) process. On the lower right inset is a screen fabricated into .006 inch kovar sheet using the Micro-EDM electrode. The walls of the screen are .002 inch wide by .006 inch deep. Meso-machining technologies being developed at Sandia National Laboratories will help manufacturers improve a variety of production processes, tools, and components. Meso-machining will benefit the aerospace, automotive, biomedical, and defense industries by creating feature sizes from the 1 to 50 micron range. Sandia's Manufacturing Science and Technology Center is developing the

371

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

(MECS) > MECS 1994 Combined Consumption and Fuel Switching (MECS) > MECS 1994 Combined Consumption and Fuel Switching Manufacturing Energy Consumption Survey 1994 (Combined Consumption and Fuel Switching) Manufacturing Energy Consumption Logo Full Report - (file size 5.4 MB) pages:531 Selected Sections (PDF format) Contents (file size 56 kilobytes, 10 pages). Overview (file size 597 kilobytes, 11 pages). Chapters 1-3 (file size 265 kilobytes, 9 pages). Chapter 4 (file size 1,070 kilobytes, 15 pages). Appendix A - Detailed Tables Tables A1 - A8 (file size 1,031 kilobytes, 139 pages). Tables A9 - A23 (file size 746 kilobytes, 119 pages). Tables A24 - A29 (file size 485 kilobytes, 84 pages). Tables A30 - A44 (file size 338 kilobytes, 39 pages). Appendix B (file size 194 kilobytes, 24 pages). Appendix C (file size 116 kilobytes, 16 pages).

372

Manufacturing of Plutonium Tensile Specimens  

SciTech Connect

Details workflow conducted to manufacture high density alpha Plutonium tensile specimens to support Los Alamos National Laboratory's science campaigns. Introduces topics including the metallurgical challenge of Plutonium and the use of high performance super-computing to drive design. Addresses the utilization of Abaqus finite element analysis, programmable computer numerical controlled (CNC) machining, as well as glove box ergonomics and safety in order to design a process that will yield high quality Plutonium tensile specimens.

Knapp, Cameron M [Los Alamos National Laboratory

2012-08-01T23:59:59.000Z

373

Metalworking Machinery Manufacturing (NAICS 3335)  

Science Conference Proceedings (OSTI)

The U.S. metalworking machinery manufacturing industry (NAICS 3335) consists of about 7,900 firms with combined annual revenues of about $29 billion. Many (75%) of these firms are small, having fewer than 20 employees. This industry consumes a large amount of electricity, with about half of their usage going to drives that are used for machine tools; therefore, it is with motors and drives that the greatest opportunities for energy savings lie. Several electric technology options are available and identi...

2012-01-31T23:59:59.000Z

374

Advancing Manufacturing Research Through Competitions  

SciTech Connect

Competitions provide a technique for building interest and collaboration in targeted research areas. This paper will present a new competition that aims to increase collaboration amongst Universities, automation end-users, and automation manufacturers through a virtual competition. The virtual nature of the competition allows for reduced infrastructure requirements while maintaining realism in both the robotic equipment deployed and the scenarios. Details of the virtual environment as well as the competitions objectives, rules, and scoring metrics will be presented.

Balakirsky, Stephen [National Institute of Standards and Technology (NIST); Madhavan, Raj [ORNL

2009-01-01T23:59:59.000Z

375

Manufacturing Technology bulletin, July 1994  

Science Conference Proceedings (OSTI)

Inside this issue: (1) Robotic cleaning safer, faster, more reliable; robots taught how to clean in seconds instead of days. (2) Microporous insulating films can boost microcircuit performance; films display improved dielectric constant, mechanical properties, (3) Life-cycle analysis: the big picture; cradle-to-grave environmental analysis tailored to the needs of defense manufacturing, (4) New simulation tool predicts properties of forged metal; internal state variable model improves design, speeds development time.

Not Available

1994-07-01T23:59:59.000Z

376

MANUFACTURING CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MANUFACTURING MANUFACTURING CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen Telephone (510) 486-4506 Email dtchen@lbl.gov Industrial Gas Manufacturing 325120 All Other Basic Inorganic Chemical Manufacturing 325188 Plastics Material and Resin Manufacturing 325211 Explosives Manufacturing 325920 All Other Plastics Product Manufacturing 326199 Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding 331491 Fabricated Structural Metal Manufacturing 332312 Metal Tank (Heavy Gauge) Manufacturing 332420 Other Metal Container Manufacturing 332439 Machine Shops 332710 Electroplating, Plating, Polishing, Anodizing, and Coloring 332813 Industrial valve Manufacturing 332911 Other Ordnance and Accessories Manufacturing 332995 All Other Miscellaneous Fabricated Metal Product Manufacturing

377

NOVEL EXCAVATION TECHNOLOGIES FOR EFFICIENT AND ECONOMIC SURFACE MINING  

SciTech Connect

Ground excavation constitutes a significant component of production costs in any surface mining operation. The excavation process entails material digging and removal in which the equipment motion is constrained by the workspace geometry. A major excavation problem is the variability of material properties, resulting in varying mechanical energy input and stress loading of shovel dipper-and-tooth assembly across the working bench. This variability has a huge impact on the shovel dipper and tooth assembly in hard formations. With this in mind, the primary objectives of the project were to (i) provide the theoretical basis to develop the Intelligent Shovel Excavation (ISE) technology to solve the problems associated with excavation in material formations; (ii) advance knowledge and frontiers in shovel excavation through intelligent navigation; and (iii) submit proposal for the design, development and implementation of the ISE technology for shovel excavation at experimental surface mining sites. The mathematical methods were used to (i) develop shovel's kinematics and dynamics, and (ii) establish the relationship between shovel parameters and the resistive forces from the material formation during excavation process. The ADAMS simulation environment was used to develop the hydraulic and cable shovel virtual prototypes. Two numerical examples are included to test the theoretical hypotheses and the obtained results are discussed. The area of sensor technology was studied. Application of specific wrist-mounted sensors to characterize the material, bucket and frame assembly was determined. Data acquisition, display and control system for shovel loading technology was adopted. The concept of data acquisition and control system was designed and a shovel boom stresses were simulated. A multi-partner collaboration between research organizations, shovel manufacturer, hardware and sensor technology companies, and surface mining companies is proposed to test design features, construct a field ready prototype and perform field testing at the surface mining sites. It is anticipated that 10% in energy savings including electricity (cable shovel) and fuel (hydraulic shovel) will be achieved by implementation of ISE technology.

Vladislav Kecojevic; Samuel Frimpong

2005-05-01T23:59:59.000Z

378

Oil, Gas, and Mining Leases (Nebraska)  

Energy.gov (U.S. Department of Energy (DOE))

This section contains rules on oil, gas, and mining leases, and grants authority to the State of Nebraska and local governments to issue leases for oil and gas mining and exploration on their lands.

379

Fact Sheet: 48C Manufacturing Tax Credits  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

48C Manufacturing Tax Credits 48C Manufacturing Tax Credits In order to foster investment and job creation in clean energy manufacturing, the American Recovery and Reinvestment Act of 2009 included a tax credit for investments in manufacturing facilities for clean energy technologies. The Section 48C Advanced Manufacturing Tax Credit originally provided a 30% investment tax credit to 183 domestic clean energy manufacturing facilities valued at $2.3 billion. Today the IRS has announced the availability of additional 48C allocations, utilizing $150 million remaining tax credits that were never fully monetized by previous awardees. This tax credit program will help build a robust U.S. manufacturing capacity to supply clean energy projects with American-made parts and equipment. These manufacturing facilities will also

380

Manufacturing Demonstration Facility (MDF) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manufacturing Demonstration Facility (MDF) Manufacturing Demonstration Facility (MDF) Manufacturing Demonstration Facility (MDF) October 11, 2013 - 9:44am Addthis The Manufacturing Demonstration Facility (MDF) is a collabora-tive manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused on Additive Manufacturing and Low-cost Carbon Fiber. Fostering Collaboration to Accelerate Progress Work conducted by MDF partners and users provides real data that is used to reduce the technical risk associated with full commercialization of promising foundational manufacturing process and materials innovations. The

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

SunShot Initiative: Solar Manufacturing Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Manufacturing Technology to Solar Manufacturing Technology to someone by E-mail Share SunShot Initiative: Solar Manufacturing Technology on Facebook Tweet about SunShot Initiative: Solar Manufacturing Technology on Twitter Bookmark SunShot Initiative: Solar Manufacturing Technology on Google Bookmark SunShot Initiative: Solar Manufacturing Technology on Delicious Rank SunShot Initiative: Solar Manufacturing Technology on Digg Find More places to share SunShot Initiative: Solar Manufacturing Technology on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Competitive Awards Diversity in Science and Technology Advances National Clean Energy in Solar Grid Engineering for Accelerated Renewable Energy Deployment Physics of Reliability: Evaluating Design Insights for Component

382

Imperial Manufacturing: Order (2013-CE-5322)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Imperial Manufacturing, Inc. to pay a $8,000 civil penalty after finding Imperial Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

383

Creation and sustainment of manufacturing technology roadmaps  

E-Print Network (OSTI)

Manufacturing technology roadmaps align manufacturing capability development to product development and the driving business need. Roadmaps allow an executable business strategy to be communicated to all levels of an ...

Grillon, Louis S

2012-01-01T23:59:59.000Z

384

EERE: Advanced Manufacturing Office Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

Office Site Map Printable Version Share this resource Send a link to EERE: Advanced Manufacturing Office Home Page to someone by E-mail Share EERE: Advanced Manufacturing Office...

385

Clean Energy Manufacturing Incentive Program (Virginia)  

Energy.gov (U.S. Department of Energy (DOE))

In April 2011, Virginia created the Clean Energy Manufacturing Incentive Grant Program. The program is meant to replace the [http://en.openei.org/wiki/Solar_Manufacturing_Incentive_Grant_%28SMIG%29...

386

Posted 7/24/12 Manufacturing Engineer  

E-Print Network (OSTI)

, starters, and generators for the commercial transportation, hybrid electric vehicle and aerospace of technologically advanced aerospace and industrial products. We design and manufacture aerospace systems Prairie, WI 53158 Electromagnetic Enterprises (EME) designs and manufactures specialized electric motors

Heller, Barbara

387

Summit Manufacturing: Case Closure (2010-SE-0303)  

Energy.gov (U.S. Department of Energy (DOE))

DOE closed this case against Summit Manufacturing, Inc. without civil penalty after Summit Manufacturing provided information that the non-compliant products were not sold in the United States.

388

FACT SHEET: 48C MANUFACTURING TAX CREDITS  

Energy.gov (U.S. Department of Energy (DOE))

The Advanced Energy Manufacturing Tax Credit Program is helping build a robust U.S. manufacturing capacity to supply clean energy projects with American-made parts and equipment. On February 7,...

389

Climate VISION: Private Sector Initiatives: Automobile Manufacturers...  

Office of Scientific and Technical Information (OSTI)

The Alliance of Automobile Manufacturers, Inc. is a trade association composed of 10 car and light truck manufacturers with about 600,000 employees at more than 250 facilities...

390

Coal mine methane global review  

Science Conference Proceedings (OSTI)

This is the second edition of the Coal Mine Methane Global Overview, updated in the summer of 2008. This document contains individual, comprehensive profiles that characterize the coal and coal mine methane sectors of 33 countries - 22 methane to market partners and an additional 11 coal-producing nations. The executive summary provides summary tables that include statistics on coal reserves, coal production, methane emissions, and CMM projects activity. An International Coal Mine Methane Projects Database accompanies this overview. It contains more detailed and comprehensive information on over two hundred CMM recovery and utilization projects around the world. Project information in the database is updated regularly. This document will be updated annually. Suggestions for updates and revisions can be submitted to the Administrative Support Group and will be incorporate into the document as appropriate.

NONE

2008-07-01T23:59:59.000Z

391

Dewatering of Ambrosia Lake Mines  

SciTech Connect

The paper discusses the design of an aquifer depressurisation system using wells at Mt. Taylor Mine, Ambrosia Lake, New Mexico. The concepts discussed should be valid for any shaft of mine in a sandstone aquifer with predominantly matrix permeability. The system uses a number of wells surrounding the mine shaft to reduce the aquifer pressure in the vicinity of the shaft. The effect of various parameters such as number of wells, wellbore diameter, time and well location are considered. It is concluded that, with a properly designed system, the aquifer pressure and water inflow rate to the shaft may be reduced to less than 15% of their potential values in the absence of wells.

Juvkam-Wold, H.C.

1982-09-01T23:59:59.000Z

392

Agricultural and Biological Engineering College of Agricultural Sciences Cooperative Extension  

E-Print Network (OSTI)

that this trend will continue, especially if the prices for fossil fuels continue to increase. Other direct, and Pennsylvania Counties Cooperating Biomass Energy Dennis E. Buffington, Professor, Agricultural and Biological iomass energy is energy derived from organic matter of recent biological origin. Common forms of biomass

Lee, Dongwon

393

Large-Scale Parallel Data Mining  

E-Print Network (OSTI)

To obtain a challenging internship in data mining, information retrieval on text and image, business intelligence, and statistical modeling.

Chunye Wang

2000-01-01T23:59:59.000Z

394

2008 Underground/Longwall Mining Buyer's Guide  

Science Conference Proceedings (OSTI)

The guide lists US companies supplying equipment and services to mines. An index by product category is included.

NONE

2008-06-15T23:59:59.000Z

395

2009 underground/longwall mining buyer's guide  

Science Conference Proceedings (OSTI)

The guide lists US companies supplying equipment and services to underground mining operations. An index by product category is included.

NONE

2009-06-15T23:59:59.000Z

396

Smart Manufacturing, Construction, and Cyber-Physical ...  

Science Conference Proceedings (OSTI)

Strategic Goal:Smart Manufacturing, Construction, and Cyber-Physical Systems. Enable the next generation of innovative ...

2013-01-03T23:59:59.000Z

397

Emerging Global Trends in Advanced Manufacturing  

Science Conference Proceedings (OSTI)

Page 1. Emerging Global Trends in Advanced Manufacturing Stephanie S. Shipp, Project Leader Nayanee Gupta Bhavya Lal ...

2013-07-31T23:59:59.000Z

398

3D Shape Searching for Manufacturing Apps.  

Science Conference Proceedings (OSTI)

3D Shape Searching for Manufacturing Applications. Principal Investigator: Afzal Godil (301) 975-4262 afzal.godil@nist.gov. ...

2010-10-05T23:59:59.000Z

399

Affordable Semi-Manufacturing: Implications for ...  

Science Conference Proceedings (OSTI)

... Dan Armbrust will review industry economics and trends, as well as manufacturing collaboration in the semiconductor and photovoltaic industries. ...

2011-10-25T23:59:59.000Z

400

Materials Processing & Manufacturing Division's Fourth ... - TMS  

Science Conference Proceedings (OSTI)

Mar 3, 2003 ... Increasing energy prices offer manufacturers an excellent incentive to .... Retrofitting Regenerative Burners on Aluminum Melting Furnaces that ...

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Arrayed Microchannel Manufacturing: Enabling a New ...  

Science Conference Proceedings (OSTI)

... Hydroprocessing USDA/DOE Biomass Program $2.4 million Work underway for upgrading pyrolysis oil Manufacturing Ohio Dept. ...

2011-08-02T23:59:59.000Z

402

National Network for Manufacturing Innovation (NNMI)  

Science Conference Proceedings (OSTI)

... Departments of Defense and Energy and other ... organizations from the Ohio-Pennsylvania-West ... manufacturing capabilities in companies large and ...

403

Climate VISION: Private Sector Initiatives: Automobile Manufacturers...  

Office of Scientific and Technical Information (OSTI)

State Programs Technical Information Plant Assessments Training Calendar Software Tools Energy Management Results Technology Pathways Automobile Manufacturers - Results No...

404

The Advanced Manufacturing Technology Consortia (AMTech ...  

Science Conference Proceedings (OSTI)

... Advanced Manufacturing National Program Office National Institute of Standards ... Management (SAM) are required ... Clarifications to budget items ...

2013-08-21T23:59:59.000Z

405

NIST Workshop on Sustainable Manufacturing: Metrics ...  

Science Conference Proceedings (OSTI)

... ICT for Design, Manufacturing and Supply chain Optimization for sustainable ... Lifecycle Management) and LCA tools to support energy and material ...

2011-10-11T23:59:59.000Z

406

Manufacturing Day Gaining Momentum: More than 150 ...  

Science Conference Proceedings (OSTI)

... "Manufacturing is an essential contributor to ... More than 150 companies and educational facilities have already registered their participation at www ...

2013-02-28T23:59:59.000Z

407

Annual Survey of Manufactures | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

are measuring productivity, updating producer price indexes, evaluating and forecasting future industrial activity, benchmarking current data on manufacturing shipments...

408

Definitition of Manufacturing R&D  

Science Conference Proceedings (OSTI)

Definition of Scope - Manufacturing-related R&D. ... or cost reduction), or increased environmental efficiency (safety, energy efficiency, environmental ...

2010-10-05T23:59:59.000Z

409

Manufacturing Supplier Network Resources | IMCP Playbook  

Science Conference Proceedings (OSTI)

... is a strategic integration and commitment of manufacturing efforts across the Office of Energy Efficiency and Renewable Energy's clean energy ...

2013-12-09T23:59:59.000Z

410

Ceramics and Additive Manufacturing; Exploring Compatibility ...  

Science Conference Proceedings (OSTI)

Symposium, Advanced Materials, Processes and Applications for Additive Manufacturing ... Lubricants in Deposition and Machining of Wire and Arc Additive ...

411

NIST and the Advanced Manufacturing Partnership National ...  

Science Conference Proceedings (OSTI)

... Increase private sector investment in ... Enhance manufacturing education at Community Colleges (CC). ... Federal funding to CCs to encourage ...

2012-09-08T23:59:59.000Z

412

Robust Capacity Planning in Semiconductor Manufacturing  

E-Print Network (OSTI)

Oct 3, 2001 ... Abstract: We present a stochastic programming approach to capacity planning under demand uncertainty in semiconductor manufacturing.

413

Solar energy systems for manufactured housing  

DOE Green Energy (OSTI)

The opportunities for solar energy utilization in manufactured housing such as mobile homes and modular homes are discussed. The general characteristics of the manufactured housing industry are described including market and prices. Special problems of the utilization of liquid heating collectors, air heating collectors, or passive types of solar heating systems in manufactured housing are considered. The market situation for solar energy in manufactured housing is discussed. The design of the Los Alamos Scientific Laboratory mobile/modular home is described.

Balcomb, J.D.

1976-01-01T23:59:59.000Z

414

Wind Manufacturing Facilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

--Alternative Fuel Vehicles --Batteries --Biofuels --Clean Cities -Building Design --Solar Decathlon -Manufacturing Energy Sources -Renewables --Solar ---SunShot --Wind...

415

New Manufacturing Extension Centers Planned for Arizona ...  

Science Conference Proceedings (OSTI)

... of Standards and Technology's (NIST) Hollings Manufacturing Extension Partnership (MEP) program has awarded cooperative agreements to the ...

2013-05-01T23:59:59.000Z

416

Manufacturing Extension Partnership (MEP) Centers for South ...  

Science Conference Proceedings (OSTI)

Manufacturing Extension Partnership (MEP) Centers for South Dakota and Kentucky. ... South Dakota and Kentucky Competition Time-line: ...

2013-03-13T23:59:59.000Z

417

Transformational Research in Civil Infrastructure and Manufacturing ...  

Science Conference Proceedings (OSTI)

Feb 4, 2011 ... automation for manufacturing; technologies to enable a smart grid; technologies for personalized medicine; technologies for water availability; ...

418

Virtual Reality for Manufacturing Case Studies  

Science Conference Proceedings (OSTI)

Virtual Reality for Manufacturing - Case Studies. Sandy Ressler National Institute of Standards and Technology sressler@nist.gov. ...

419

Advances in Hydroelectric Turbine Manufacturing and Repair  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2013. Symposium, Advances in Hydroelectric Turbine Manufacturing and Repair. Sponsorship ...

420

Economic evaluation of the MIT process for manufacture of ethanol  

DOE Green Energy (OSTI)

This report summarizes the results of an economic evaluation of the MIT process for the manufacture of ethanol from cellulosic residues. Conceptual process designs were developed for two cases, Case A which is based on the experimental data obtained to date, and Case B which hypothesizes the suppression of acid byproducts. Manufacturing costs, including profit, were estimated at $12.20/million Btu for Case A and $9.40/million Btu for Case B. These are equivalent to about $1.05 and $0.80/gal ethanol respectively. These economic estimates may be slightly on the low side since they do not consider feedstock storage nor working capital requirements. Nevertheless, the manufacturing costs for Case A appear to be comparable to those of the manufacture of ethanol from corn. The plant size used for this analysis was 1500 ton/day corn stover. This is considered to be a realistic size. The conceptual plants make about 27 million gal/yr ethanol in Case A and 41 million gal/yr in Case B. The MIT process appears to be one of the more promising programs being developed under contract for DOE. It is recommended that the process research be continued. Three areas of concern were identified which must be investigated before the process can be commercialized. First, a satisfactory means of storage of corn stover and other agricultural residues must be developed. Second, a method to sterilize corn stover must be developed or it must be demonstrated that the MIT process can run continuously for extended periods with stover that has been sterilized. Third, research must be done to demonstrate the recycle and reuse of process water.

Jenkins, D.M.; Reddy, T.S.

1979-06-28T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Uranium Mines and Uranium Mineral Localities Visited Country State/Province County/District Mine Name U Minerals Present  

E-Print Network (OSTI)

Uranium Mines and Uranium Mineral Localities Visited Country State/Province County/District Mine USA New Mexico Grants Zia Mines Tyuyamunite 1999 USA Arizona Gila Hope Mine Uraninite 2001 USA Arizona Gila Red Bluff Mine Uraninite 2001 USA Wyoming Fremont Congo (Section 16 Mine) Carnotite 2003 USA

422

UK mining invests, suppliers profit  

Science Conference Proceedings (OSTI)

In the midst of a major economic crisis in the United Kingdom, equipment suppliers have been reporting a number of considerable purchases by British coal mining companies. In December 2008, Liebherr-Great Britain delivered the first two of four Rq350 Litronic hydraulic excavators for use at the Broken Cross opencast coal site in Lanarkshire, Scotland. Ten Terex TR100 rigid haulers were delivered to the site in late 2008. Hatfield Colliery at Stainforth, South Yorkshire, has been reopened by PowerFuel. The main equipment for two longwall faces was supplied by Joy Mining Machinery UK Ltd. 2 photos.

NONE

2009-04-15T23:59:59.000Z

423

Energy Manufacturing Matthew Realff and Steven Danyluk  

E-Print Network (OSTI)

Energy Manufacturing Matthew Realff and Steven Danyluk Georgia Institute of Technology This white Foundation and held in Arlington VA, on March 24-25, 2009 on Energy Manufacturing. The workshop attendees participated in discussions and presented their views on energy manufacturing and the presentations

Das, Suman

424

Low Temperature PEM Fuel Cell Manufacturing Needs  

E-Print Network (OSTI)

Cell Manhattan Project #12; Cost drivers were identified for the following: · MEA · Plates · Balance of Plant (BOP) · Fuel Processing Manufacturing Fuel Cell Project ­ Phase 1 Note that this presentation-kilowatt reformer based FC generators #12;Manufacturing Fuel Cell Project ­ Phase 2 Manufacturing Roadmap · Projects

425

DTN Communication in a Mine Philip Ginzboorg  

E-Print Network (OSTI)

coal mine monitoring with wireless sensor networks. volume 5, pages 1­29, New York, NY, USA, 2009. ACM. [11] W. Yang and Y. Huang. Wireless sensor network based coal mine wireless and integrated securityDTN Communication in a Mine Philip Ginzboorg Nokia Research Center Teemu Kärkkäinen Aalto

Ott, Jörg

426

Wise mining method through ant colony optimization  

Science Conference Proceedings (OSTI)

This paper proposes an algorithm for data mining named Pheromone-Miner (ant-colony-based data miner). The algorithm is inspired by both researches on the behavior of real ant colonies and data mining concepts as well as principles. The goal of Pheromone-Miner ... Keywords: ant colony optimization algorithm, data mining, knowledge discovery, pheromone

Yang Jianxiong; Junzo Watada

2009-10-01T23:59:59.000Z

427

Efficient dynamic mining of constrained frequent sets  

Science Conference Proceedings (OSTI)

Data mining is supposed to be an iterative and exploratory process. In this context, we are working on a project with the overall objective of developing a practical computing environment for the human-centered exploratory mining of frequent sets. One ... Keywords: Association rules, constraints, data mining, dynamic changes, frequent sets, limited buffer space

Laks V. S. Lakshmanan; Carson Kai-Sang Leung; Raymond T. Ng

2003-12-01T23:59:59.000Z

428

Data Preparation for Data Mining Using SAS  

Science Conference Proceedings (OSTI)

Are you a data mining analyst, who spends up to 80% of your time assuring data quality, then preparing that data for developing and deploying predictive models? And do you find lots of literature on data mining theory and concepts, but when it comes ... Keywords: Data Mining, Data Warehousing, Database Management

Mamdouh Refaat

2006-09-01T23:59:59.000Z

429

COLORADO SCHOOL OF MINES EMERGENCY MANAGEMENT PROCEDURE  

E-Print Network (OSTI)

COLORADO SCHOOL OF MINES EMERGENCY MANAGEMENT PROCEDURE #12;INTRODUCTION COLORADO SCHOOL OF MINES EMERGENCY MANAGEMENT PROCEDURE 1 EMERGENCY PREPAREDNESS AT THE COLORADO SCHOOL OF MINES Emergencies and psychologically prepared to handle unexpected emergencies is an individual, as well as an organizational

430

MINING CLAIM PROCEDURES NEVADA BUREAU OF MINES AND GEOLOGY  

E-Print Network (OSTI)

Talapoosa 094 Tecoma 095 Ten Mile 096 Tonopah 097 Union 098 Varyville 099 Wallace Canyon Area 100 Washiki were identified that require additional testing, including deep potential for Carlin-style high of Operation with the BLM to begin open pit mining at the Emigrant deposit in the Piñon Range. Ore from the new

Tingley, Joseph V.

431

Biomass Energy and Agricultural Sustainability  

E-Print Network (OSTI)

Biomass Energy and Agricultural Sustainability Stephen Kaffka Department of Plant Sciences University of California, Davis & California Biomass Collaborative February 2008 #12;E x p e c t e d d u r 9 ) ---------Biomass era----------- --?????????? #12;By 2025, every source of energy

California at Davis, University of

432

ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry: Chapter 1: U.S. Mining Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 Mining Overview 1. Mining: Backbone of the U.S. Economy Mining is the search for, extraction, and beneficiation and processing of solid minerals from the earth. The kinds of minerals extracted from the earth vary widely. For thousands of years, these and other minerals have provided the raw materials with which human civilizations have been built. The United States Department of Energy and the National Mining Association are working in partnership to implement the Mining Industry of the Future strategy. Cooperatively, the Department of Energy and National Mining Association selected specific mineral commodities to review in this Mining Energy and Environmental Profile. These commodities require significant energy to extract and prepare for first saleable product and have the potential for

433

Ohio Advanced Energy Manufacturing Center  

SciTech Connect

The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall industry health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries and high temperature heat exchangers. It also included a novel advanced weld trainer that EWI

Kimberly Gibson; Mark Norfolk

2012-07-30T23:59:59.000Z

434

Ohio Advanced Energy Manufacturing Center  

Science Conference Proceedings (OSTI)

The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall industry health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries and high temperature heat exchangers. It also included a novel advanced weld trainer that EWI

Kimberly Gibson; Mark Norfolk

2012-07-30T23:59:59.000Z

435

Energy-Saving Homes, Buildings, and Manufacturing | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy-Saving Homes, Buildings, and Manufacturing Energy-Saving Homes, Buildings, and Manufacturing Buildings Homes Advanced Manufacturing Government Energy Management Buildings...

436

Research on advanced photovoltaic manufacturing technology  

DOE Green Energy (OSTI)

This report outlines opportunities for significantly advancing the scale and economy of high-volume manufacturing of high-efficiency photovoltaic (PV) modules. We propose to pursue a concurrent effort to advance existing crystalline silicon module manufacturing technology and to implement thin film CuInSe{sub 2} (CIS) module manufacturing. This combination of commercial-scale manufacturing of high-efficiency crystalline silicon modules and of pilot-scale manufacturing of low-cost thin film CIS technology will support continued, rapid growth of the US PV industry.

Jester, T.; Eberspacher, C. (Siemens Solar Industries, Camarillo, CA (United States))

1991-11-01T23:59:59.000Z

437

The Use of Oil Refinery Wastes as a Dust Suppression Surfactant for Use in Mining  

Science Conference Proceedings (OSTI)

In this research, the suitability of a selection of petroleum refinery wastes as a dust suppressant were examined. Dust is a significant problem in surface and underground mining mainly because of its adverse effects on human health and machinery. Hence, dust control and suppression is a vital part of mine planning for mining engineers. Water is the oldest and the cheapest suppressant in dealing with the mine dusts. However, surfactant use has recently been used for a wider range of applications in the mining industry. In order to carry out laboratory experiments, a dust chamber was designed and manufactured. The chamber has an inlet for coal dust entrance and a nozzle for spraying water and the oil refinery wastes. Water and the surfactants were mixed at various ratios and then sprayed onto the coal dusts within the cell. Dust concentration was measured systematically to determine the effects of surfactant containing solution on the coal dust and the data obtained by the measurements were analyzed. The results showed that the oil refinery wastes could be used as a dust suppressant, which may create an economical utilization for the wastes concerned.

Dixon-Hardy, D.W.; Beyhan, S.; Ediz, I.G.; Erarslan, K. [University of Leeds, Leeds (United Kingdom)

2008-10-15T23:59:59.000Z

438

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Molding, Thermoforming & Compounding Molding, Thermoforming & Compounding PDF format (89 kb) The Manufacturing Science & Technology Center helps customers choose the best materials and techniques for their product by providing a variety of conformal coatings, thermoforming, and compounding materials using established or custom designed processes. The department provides consulting services for injection molding and rubber compounding projects. Capabilities: Thermoforming: Processing thermoplastics such as polycarbonate, polymethyl methacrylate, polypropylene polystyrene, and ABS; producing holding trays, protective caps, and custom covers Injection Molding Consultation: Designing your part to be injection molded, helping you choose the best material for your application, and supporting your interface with injection molding companies

439

Process for manufacturing tantalum capacitors  

DOE Patents (OSTI)

A process for manufacturing tantalum capacitors in which microwave energy is used to sinter a tantalum powder compact in order to achieve higher surface area and improved dielectric strength. The process comprises cold pressing tantalum powder with organic binders and lubricants to form a porous compact. After removal of the organics, the tantalum compact is heated to 1,300 to 2,000 C by applying microwave radiation. Said compact is then anodized to form a dielectric oxide layer and infiltrated with a conductive material such as MnO[sub 2]. Wire leads are then attached to form a capacitor to said capacitor is hermetically packaged to form the finished product.

Lauf, R.J.; Holcombe, C.E.; Dykes, N.L.

1993-02-02T23:59:59.000Z

440

Process for manufacturing tantalum capacitors  

DOE Patents (OSTI)

A process for manufacturing tantalum capacitors in which microwave energy is used to sinter a tantalum powder compact in order to achieve higher surface area and improved dielectric strength. The process comprises cold pressing tantalum powder with organic binders and lubricants to form a porous compact. After removal of the organics, the tantalum compact is heated to 1300.degree. to 2000.degree. C. by applying microwave radiation. Said compact is then anodized to form a dielectric oxide layer and infiltrated with a conductive material such as MnO.sub.2. Wire leads are then attached to form a capacitor to said capacitor is hermetically packaged to form the finished product.

Lauf, Robert J. (Oak Ridge, TN); Holcombe, Cressie E. (Knoxville, TN); Dykes, Norman L. (Oak Ridge, TN)

1993-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Manufacturing method of photonic crystal  

DOE Patents (OSTI)

A manufacturing method of a photonic crystal is provided. In the method, a high-refractive-index material is conformally deposited on an exposed portion of a periodic template composed of a low-refractive-index material by an atomic layer deposition process so that a difference in refractive indices or dielectric constants between the template and adjacent air becomes greater, which makes it possible to form a three-dimensional photonic crystal having a superior photonic bandgap. Herein, the three-dimensional structure may be prepared by a layer-by-layer method.

Park, In Sung; Lee, Tae Ho; Ahn, Jin Ho; Biswas, Rana; Constant, Kristen P.; Ho, Kai-Ming; Lee, Jae-Hwang

2013-01-29T23:59:59.000Z

442

Interstate Mining Compact (Maryland) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » Interstate Mining Compact (Maryland) Interstate Mining Compact (Maryland) < Back Eligibility Commercial Developer Investor-Owned Utility Municipal/Public Utility Rural Electric Cooperative Utility Program Info State Maryland Program Type Environmental Regulations Provider Interstate Mining Compact Commission This legislation authorizes the state's entrance into the Interstate Mining Compact, a multi-state governmental agency / organization that represents the natural resource and related environmental protection interests of its member states. Currently, 23 states are members to the compact, and 6 additional states are associate members. The compact is administered by the Interstate Mining Compact Commission, which does not possess regulatory

443

Opencut Mining Act (Montana) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Opencut Mining Act (Montana) Opencut Mining Act (Montana) Opencut Mining Act (Montana) < Back Eligibility Utility Investor-Owned Utility Industrial Construction Municipal/Public Utility Installer/Contractor Rural Electric Cooperative Program Info State Montana Program Type Siting and Permitting Provider Montana Department of Environmental Quality The policy of the state is to provide adequate remedies to protect the environmental life support system from degradation and to prevent unreasonable depletion and degradation of natural resources from strip and underground mining. This Act imposes permitting and operating restrictions on opencut mining activities. The Act contains permitting, siting, and procedural requirements; more specific regulations can be found in the Administrative Rules of Montana

444

Web mining for web personalization  

Science Conference Proceedings (OSTI)

Web personalization is the process of customizing a Web site to the needs of specific users, taking advantage of the knowledge acquired from the analysis of the user's navigational behavior (usage data) in correlation with other information collected ... Keywords: WWW, Web personalization, Web usage mining, user profiling

Magdalini Eirinaki; Michalis Vazirgiannis

2003-02-01T23:59:59.000Z

445

Mining succinct predicated bug signatures  

Science Conference Proceedings (OSTI)

A bug signature is a set of program elements highlighting the cause or effect of a bug, and provides contextual information for debugging. In order to mine a signature for a buggy program, two sets of execution profiles of the program, one capturing ... Keywords: bug signature, feature selection, statistical debugging

Chengnian Sun; Siau-Cheng Khoo

2013-08-01T23:59:59.000Z

446

Data Mining for Seismic Exploration  

Science Conference Proceedings (OSTI)

Seismic exploration plays an important role in petroleum industry. It is widely admitted that there are a lot of limitations of conventional data analysis ways in oil and gas industry. Traditional methods in petroleum engineering are knowledge-driven ... Keywords: seismic exploration, data mining, cluster analysis

Zhongbin Ouyang; Jing He; Keliang Zhang

2008-12-01T23:59:59.000Z

447

Mining into the new millennium  

Science Conference Proceedings (OSTI)

After more than 3 years of production and a billion tons of coal shipped, Foundation Coal West, a subsidiary of Foundation Coal Holding Inc., continues to operate two of the original surface mines in Wyoming's Powder River Basin. The article describes equipment (conveyors, trucks, surface miners etc.) deployed at Belle Ayr and Eagle Butte PRB operations. 3 photos.

Buchsbaum, L.

2009-06-15T23:59:59.000Z

448

Corner-cutting mining assembly  

DOE Patents (OSTI)

This invention resulted from a contract with the United States Department of Energy and relates to a mining tool. More particularly, the invention relates to an assembly capable of drilling a hole having a square cross-sectional shape with radiused corners. In mining operations in which conventional auger-type drills are used to form a series of parallel, cylindrical holes in a coal seam, a large amount of coal remains in place in the seam because the shape of the holes leaves thick webs between the holes. A higher percentage of coal can be mined from a seam by a means capable of drilling holes having a substantially square cross section. It is an object of this invention to provide an improved mining apparatus by means of which the amount of coal recovered from a seam deposit can be increased. Another object of the invention is to provide a drilling assembly which cuts corners in a hole having a circular cross section. These objects and other advantages are attained by a preferred embodiment of the invention.

Bradley, J.A.

1981-07-01T23:59:59.000Z

449

American Wind Manufacturing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

American Wind Manufacturing American Wind Manufacturing American Wind Manufacturing Addthis 1 of 9 Nordex USA -- a global manufacturer of wind turbines -- delivered and installed turbine components for the Power County Wind Farm, shown here, in Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-05 14:38 2 of 9 Power County Wind Farm - Power County, Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-07 16:16 3 of 9 Power County Wind Farm - Power County, Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-05 17:14 4 of 9 Nordex USA manufacturing facility - Jonesboro, Arkansas. Image: Nordex USA, Inc. Date taken: 2011-05-02 13:55 5 of 9 Nordex USA flagship manufacturing facility in Jonesboro, Arkansas. Image: Nordex USA, Inc. Date taken: 2011-05-02 14:11 6 of 9 Nordex USA flagship manufacturing facility in Jonesboro, Arkansas.

450

Mines in the Four Corners anticipate growth  

Science Conference Proceedings (OSTI)

Productive mines in the southwest deplete reserves, while the government drags its heels on new power projects. Production in Arizona and New Mexico has fallen 18% over the last four years to 34.1 million tons. With Chevron Mining's McKinley mine rapidly depleting its reserves the industry will continue to contract. In the last three years at least three large mines in the Four Corners have terminated operations. Three others remain captive operations: BHP Billiton's San Juan Underground and Navajo Surface operations and Peabody Energy's Kayenta surface mine. In 2006 the Black Mesa mine stopped producing coal. These four mines are isolated from the national railways. Peabody's new El Segundo surface mine near Grants, NM is increasing production. If the planned $3 billion Desert Rock coal-fired power plant is built this will present a new market for the Navajo mine. The article gives details about the state of the aforementioned mines and of the new King II coal mine on the northern periphery of the San Juan basin and discusses the state of plans for the Desert Rock Energy Project. 5 photos.

Buchsbaum, L.

2008-02-15T23:59:59.000Z

451

Mine closures yield fields of green  

SciTech Connect

The cleanup and reclamation of North America's defunct mines or those set for closure will be extremely costly, estimated to be over one trillion dollars within the next ten to twenty years. In Canada, mines are controlled by the provinces and British Columbia began reclamation of major coal mines and hard rock metal mines in 1969. Other provinces have followed suit and in 1991, Ontario ruled that new and existing mines and advanced exploration projects must be designed for closuer. Many US states are enacting similar laws and the EPA plans to require mines to submit closure plans with their permit applications. Cleanup includes the sale of usable equipment, salvage of the rest, dismantling buildings, treatment and disposal of process chemicals, hazardous materials and tainted soils as well as recontouring and revegetation of the sites. Currently, at Elliot Lake in Canada, three of Canada's largest underground uranium mines are undergoing the process of closure.

Jones, S.

1993-01-11T23:59:59.000Z

452

Oil-shale mining, Rifle, Colorado, 1944-1956  

SciTech Connect

The Rifle, Colorado, oil-shale project of the Bureau of Mines included three major divisions: (1) mining, (2) retorting, and (3) refining. The major functions of the mining program were to supply oil shale to the retorts, to devise mining procedures, and to develop an underground-mining method by which oil shale could be produced safely at an unusually low cost per ton. The selected mining procedures and direct mining costs were demonstrated by sustained test runs.

East, J.H. Jr.; Gardner, E.D.

1964-01-01T23:59:59.000Z

453

Before the Senate Agriculture, Nutrition, and Forestry | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agriculture, Nutrition, and Forestry Before the Senate Agriculture, Nutrition, and Forestry Before the Senate Agriculture, Nutrition, and Forestry By: Richard Newell, Administrator...

454

Manufacturing Energy Consumption Survey (MECS) - U.S. Energy ...  

U.S. Energy Information Administration (EIA)

Crude oil, gasoline ... Manufacturing Energy Consumption Survey (MECS ... transportation, manufacturing, and a variety of consumer products. It is the ...

455

Sustainability in Additive Manufacturing and Energy Consumption in ...  

Science Conference Proceedings (OSTI)

Symposium, Green Technologies for Materials Manufacturing and Processing IV. Presentation Title, Sustainability in Additive Manufacturing and Energy ...

456

On the Manufacturing of Lattice Structures by Electron Beam Melting  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2012. Symposium, Additive Manufacturing of Metals. Presentation Title, On the Manufacturing of ...

457

NAMII Announces Second Call for Additive Manufacturing Projects  

Science Conference Proceedings (OSTI)

Sep 6, 2013 ... The National Additive Manufacturing Innovation Institute (NAMII) has announced its second call for additive manufacturing applied research ...

458

Two Manufacturers, a Water Treatment Company and a Bank ...  

Science Conference Proceedings (OSTI)

... today announced two manufacturers, a water ... America's largest, independent manufacturer and marketer of ... heavy duty, and off-highway vehicles. ...

2011-07-13T23:59:59.000Z

459

Connecting Small Manufacturers with the Capital Needed to ...  

Science Conference Proceedings (OSTI)

... the exception of vehicle or equipment ... Grant Advanced Technology Vehicles Loan Manufacturer ... Small Manufacturers Capital Access Inventory and ...

2013-07-31T23:59:59.000Z

460

Slide 1 of 19NCA -Agriculture with a California Focus Agriculture with a California  

E-Print Network (OSTI)

Slide 1 of 19NCA - Agriculture with a California Focus Agriculture with a California Focus (NCA Draft Findings) Richard Grotjahn Professor of Climate Dynamics University of California, Davis 6 March 2013 #12;Slide 2 of 19NCA - Agriculture with a California Focus Authors of Chapter 6: Agriculture

Grotjahn, Richard

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Data Mining for Manufacturing Control: An application in optimizing IC test  

E-Print Network (OSTI)

-inked) chips are mounted into packages, electrical contacts are bonded in place, and then a protective covering), and then the wafers are cut up, and the good die are assembled into packages and connected to the package pins. Finally, the resulting packages are tested to ensure that the #12;nal product is functioning correctly

Dietterich, Thomas G.

462

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Sol-Gel Glasses Sol-Gel Glasses PDF format (74 kb) Sol Gel Sol Gel Coating with Sol-Gel Glasses Coating with Sol-Gel Glasses The Manufacturing Science & Technology Center conducts process development and scale-up of ceramic and glass materials prepared by the sol-gel process. Sol-gel processing uses solutions prepared at low temperature rather than high temperature powder processing to make materials with controlled properties. A precursor sol-gel solution (sol) is either poured into a mold and allowed to gel or is diluted and applied to a substrate by spinning, dipping, spraying, electrophoresis, inkjet printing or roll coating. Controlled drying of the wet gel results in either a ceramic or glass bulk part or a thin film on a glass, plastic, ceramic or metal substrate.

463

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Welding, Fabrication, & Metal Forming Welding, Fabrication, & Metal Forming PDF format (159 kb) The department consists of three trades: welding; fabrication and assembly; and precision metal forming. These interrelated groups use similar equipment and rely on each other's skills. One stop will get you the service of three reliable trades. The team manufactures and assembles prototype hardware and has the in-house capability of producing hardware with sizes ranging from thumbnail to rail-car. Expertise includes aircraft quality sheet metal construction, certified welding, and assembly. The staff has experience managing a variety of activities: design modification assistance; in-house fabrication; and project management and can work with your engineers to transform sketches and ideas into working prototypes.

464

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

3 3 Energy Information Administration/Manufacturing Consumption of Energy 1994 Glossary Anthracite: A hard, black, lustrous coal containing a high percentage of fixed carbon and a low percentage of volatile matter. Often referred to as hard coal. Barrel: A volumetric unit of measure equivalent to 42 U.S. gallons. Biomass: Organic nonfossil material of biological origin constituting a renewable energy source. Bituminous Coal: A dense, black coal, often with well-defined bands of bright and dull material, with a moisture content usually less than 20 percent. Often referred to as soft coal. It is the most common coal. Blast Furnace: A shaft furnace in which solid fuel (coke) is burned with an air blast to smelt ore in a continuous operation. Blast Furnace Gas: The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to

465

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

LTCC multi-chip module LTCC multi-chip module A high density LTCC multi-chip module Electronic Packaging PDF format (150 kb) The Electronic Packaging technologies in the Thin Film, Vacuum, & Packaging Department are a resource for all aspects of microelectronic packaging. From design and layout to fabrication of prototype samples, the staff offers partners the opportunity for concurrent engineering and development of a variety of electronic packaging concepts. This includes assistance in selecting the most appropriate technology for manufacturing, analysis of performance characteristics and development of new and unique processes. Capabilities: Network Fabrication Low Temperature Co-Fired Ceramic (LTCC) Thick Film Thin Film Packaging and Assembly Chip Level Packaging MEMs Packaging

466

Means of manufacturing annular arrays  

DOE Patents (OSTI)

A method is described for manufacturing an annular acoustic transducer array from a plate of transducer material, which enables production of precision aligned arrays at low cost. The circular plate is sawed along at least two lines that are radial to the axis of the plate. At steps along each radial cut, the plate is rotated first in one direction and then in an opposite direction by a predetermined angle such as slightly less than 90/sup 0/. The cuts result in the forming of several largely ring-shaped lands, each largely ring-shaped land being joined to the other rings of different radii by thin portions of the plate, and each ring being cut into segments. The bridges that join different rings hold the transducer together until it can be mounted on a lens.

Day, R.A.

1985-10-10T23:59:59.000Z

467

Solar collector manufacturing activity, 1992  

DOE Green Energy (OSTI)

This report presents data provided by US-based manufacturers and importers of solar collectors. Summary data on solar thermal collector shipments are presented for the years 1974 through 1992. Summary data on photovoltaic cell and module shipments are presented for the years 1982 through 1992. Detailed information for solar thermal collectors and photovoltaic cells and modules are presented for 1992. Appendix A describes the survey methodology. Appendix B contains the 1992 survey forms and instructions. Appendices C and D list the companies that responded to the 1992 surveys and granted permission for their names and addresses to appear in the report. Appendix E provides selected tables from this report with data shown in the International System of Units (SI) metric units. Appendix F provides an estimate of installed capacity and energy production from solar collectors for 1992.

Not Available

1993-11-09T23:59:59.000Z

468

Optimizing Manufactured Housing Energy Use  

E-Print Network (OSTI)

In partnership with the Florida Solar Energy Center (FSEC), two manufactured homes were located on North Carolina A&T State University's campus in Greensboro, NC and used in a side-by-side energy consumption comparison. One of the homes was built to the basic HUD code standard and the other was constructed with features expected to produce a home that was 50% more energy efficient. FSEC and NCATSU began monitoring energy performance in both homes. In addition, the performance of each unit was evaluated using a DOE2 based computer energy analysis program developed by FSEC. A comparison of the performance of the units shows a measured energy savings in the more energy efficient unit of 52% for the Heating, cooling, and DHW energy use. This compares well with the energy savings predicted by the FSEC Energy Gauge program of 57%, even when accounting for the warmer than usual winter experienced during the testing period.

McGinley, W. M.; Jones, A.; Turner, C.; Chandra, S.; Beal, D.; Parker, D. S.; Moyer, N.; McIlvaine, J.

2004-01-01T23:59:59.000Z

469

Photovoltaic manufacturing technology, Phase 1  

DOE Green Energy (OSTI)

This report describes existing integrated processes for solar cell manufacturing and lists as the primary opportunity for improvement the following areas: low-cost silicon sheets with improved characteristics; improved large-scale and automated solar cell processes that can lead to cell efficiencies in the range of 14% (encapsulated) for direct-cast wafers; improved handling and lamination of large-area modules for the emerging utility market. The proposed solutions can lead to finished module costs on the order of $1.55 per square meter or a selling price of less than $2.00/Watt. The problems that may be considered generic to the industry and that have been addressed in this work are as follows: gettering and passivation of silicon wafers; spray-on passivation layers; dual antireflection coatings; ink-jet printing of metallizations; and automated handling of large-area modules and associated vertical lamination. 14 refs.

Somberg, H. (Global Photovoltaic Specialists, Inc., Canoga Park, CA (United States))

1991-11-01T23:59:59.000Z

470

Wind Turbine Manufacturing Process Monitoring  

SciTech Connect

To develop a practical inline inspection that could be used in combination with automated composite material placement equipment to economically manufacture high performance and reliable carbon composite wind turbine blade spar caps. The approach technical feasibility and cost benefit will be assessed to provide a solid basis for further development and implementation in the wind turbine industry. The program is focused on the following technology development: (1) Develop in-line monitoring methods, using optical metrology and ultrasound inspection, and perform a demonstration in the lab. This includes development of the approach and performing appropriate demonstration in the lab; (2) Develop methods to predict composite strength reduction due to defects; and (3) Develop process models to predict defects from leading indicators found in the uncured composites.

Waseem Faidi; Chris Nafis; Shatil Sinha; Chandra Yerramalli; Anthony Waas; Suresh Advani; John Gangloff; Pavel Simacek

2012-04-26T23:59:59.000Z

471

High Pressure Hydrogen Tank Manufacturing  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop Workshop High Pressure Hydrogen Tank Manufacturing Mark Leavitt Quantum Fuel Systems Technologies Worldwide, Inc. August 11, 2011 This presentation does not contain any proprietary, confidential, or otherwise restricted information History of Innovations... Announced breakthrough in all-composite lightweight, high capacity, low-cost fuel storage technologies. * Developed a series of robust, OEM compatible electronic control products. Developed H 2 storage system for SunLine Tran-sit Hythane® bus. Awarded patent for integrated module including in-tank regulator * Developed high efficiency H 2 fuel storage systems for DOE Future Truck programs Developed H 2 storage and metering system for Toyota's FCEV platform. First to certify 10,000 psi systems in Japan

472

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Electro Microfluidic Dual In-line Package (EMDIP) Electro Microfluidic Dual In-line Package (EMDIP) PDF format (115 kb) EMDIP diagram EMDIP Diagram Microfluidics is experiencing explosive growth in new product developments. Already there are many commercial applications for electro microfluidic devices such as chemical sensors, biological sensors, and drop ejectors for both printing and chemical analysis. The number of surface micromachined microfluidic devices is likely to increase. Manufacturing efficiency and integration of microfluidics with electronics will become important. In order to realize applications for these devices, an efficient method for packaging microfluidic devices is needed. Responding to this need, researchers at Sandia developed the Electro Microfluidic Dual In-Line Package (EMDIP) and the Fluidic Printed Wiring Board (FPWB).

473

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

A24. A24. Total Inputs of Energy for Heat, Power, and Electricity Generation by Program Sponsorship, Industry Group, Selected Industries, and Type of Energy- Management Program, 1994: Part 1 (Estimates in Trillion Btu) See footnotes at end of table. Energy Information Administration/Manufacturing Consumption of Energy 1994 285 SIC Management Any Type of Sponsored Self-Sponsored Sponsored Sponsored Code Industry Group and Industry Program Sponsorship Involvement Involvement Involvement Involvement a No Energy Electric Utility Government Third Party Type of Sponsorship of Management Programs (1992 through 1994) RSE Row Factors Federal, State, or Local RSE Column Factors: 0.7 1.1 1.0 0.7 1.9 0.9 20-39 ALL INDUSTRY GROUPS Participation in One or More of the Following Types of Programs . .

474

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

A9. A9. Total Inputs of Energy for Heat, Power, and Electricity Generation by Fuel Type, Census Region, and End Use, 1994: Part 1 (Estimates in Btu or Physical Units) See footnotes at end of table. Energy Information Administration/Manufacturing Consumption of Energy 1994 166 End-Use Categories (trillion Btu) kWh) (1000 bbl) (1000 bbl) cu ft) (1000 bbl) tons) (trillion Btu) Total (million Fuel Oil Diesel Fuel (billion LPG (1000 short Other Net Distillate Natural and Electricity Residual Fuel Oil and Gas Breeze) a b c Coal (excluding Coal Coke d RSE Row Factors Total United States RSE Column Factors: NF 0.5 1.3 1.4 0.8 1.2 1.2 NF TOTAL INPUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16,515 778,335 70,111 26,107 5,962 25,949 54,143 5,828 2.7 Indirect Uses-Boiler Fuel . . . . . . . . . . . . . . . . . . . . . . . --

475

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

0. 0. Number of Establishments that Actually Switched Fuels from Natural Gas to Residual Fuel Oil, by Industry Group and Selected Industries, 1994 369 Energy Information Administration/Manufacturing Consumption of Energy 1994 SIC Residual Fuel Oil Total Code Industry Group and Industry (billion cu ft) Factors (counts) (counts) (percents) (counts) (percents) a Natural Gas Switchable to Establishments RSE Row Able to Switch Actually Switched RSE Column Factors: 1.3 0.1 1.4 1.7 1.6 1.8 20 Food and Kindred Products . . . . . . . . . . . . . . . . . . . . . . . . . 81 14,698 702 4.8 262 1.8 5.6 2011 Meat Packing Plants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 759 23 3.0 10 1.3 9.0 2033 Canned Fruits and Vegetables . . . . . . . . . . . . . . . . . . . . . 9 531 112 21.2 33 6.2 11.6 2037 Frozen Fruits and Vegetables . . . . . . . . . . . . . . . . . . . . . . 5 232 Q 5.3

476

Advanced Underground Gas Storage Concepts Refrigerated-Mined Cavern Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

UNDERGROUND GAS STORAGE CONCEPTS UNDERGROUND GAS STORAGE CONCEPTS REFRIGERATED-MINED CAVERN STORAGE FINAL REPORT DOE CONTRACT NUMBER DE-AC26-97FT34349 SUBMITTED BY: PB-KBB INC. 11757 KATY FREEWAY, SUITE 600 HOUSTON, TX 77079 SEPTEMBER 1998 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily

477

Advanced Manufacturing Office: MotorMaster+  

NLE Websites -- All DOE Office Websites (Extended Search)

MotorMaster+ to MotorMaster+ to someone by E-mail Share Advanced Manufacturing Office: MotorMaster+ on Facebook Tweet about Advanced Manufacturing Office: MotorMaster+ on Twitter Bookmark Advanced Manufacturing Office: MotorMaster+ on Google Bookmark Advanced Manufacturing Office: MotorMaster+ on Delicious Rank Advanced Manufacturing Office: MotorMaster+ on Digg Find More places to share Advanced Manufacturing Office: MotorMaster+ on AddThis.com... MotorMaster+ This photo shows the inner workings of an industrial electric motor with gears. In the lower left hand corner are the words "MotorMaster+" and underneath are the words "Motor-Driven Systems." Download MotorMaster+ now! Version: 4.01.01 Release Date: September 21, 2010 Release Notes Metric Unit Measurements: No

478

Advanced manufacturing: Technology and international competitiveness  

SciTech Connect

Dramatic changes in the competitiveness of German and Japanese manufacturing have been most evident since 1988. All three countries are now facing similar challenges, and these challenges are clearly observed in human capital issues. Our comparison of human capital issues in German, Japanese, and US manufacturing leads us to the following key judgments: Manufacturing workforces are undergoing significant changes due to advanced manufacturing technologies. As companies are forced to develop and apply these technologies, the constituency of the manufacturing workforce (especially educational requirements, contingent labor, job content, and continuing knowledge development) is being dramatically and irreversibly altered. The new workforce requirements which result due to advanced manufacturing require a higher level of worker sophistication and responsibility.

Tesar, A.

1995-02-01T23:59:59.000Z

479

Agriculture - Noise and shocking investigation  

Science Conference Proceedings (OSTI)

This power quality (PQ) case study presents an investigation of noise and shocking from the telephone line at a horse farm. The investigation revealed that the noise was caused by an arching connection and vegetation along the fence. Also the charger's grounding system was not installed properly. Recommendations were made to the customer to reinstall the charger's ground system to manufacturer's specification and use an AM radio to find the loose connection along the fence.

2003-12-31T23:59:59.000Z

480

On probabilistic models for uncertain sequential pattern mining  

Science Conference Proceedings (OSTI)

We study uncertainty models in sequential pattern mining. We consider situations where there is uncertainty either about a source or an event. We show that both these types of uncertainties could be modelled using probabilistic databases, and give possible-worlds ... Keywords: mining uncertain data, novel algorithms for mining, probabilistic databases, sequential pattern mining, theoretical foundations of data mining.

Muhammad Muzammal; Rajeev Raman

2010-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturing agriculture mining" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Information Circular 9465 Handbook for Dust Control in Mining  

E-Print Network (OSTI)

. This includes underground coal and hard-rock mines, as well as surface mines, stone mines, and hard-rock tunnels.S. coal mine ventilation regulations require an average air velocity of 60 ft/min. This velocity is based]. This relatively high air velocity is required because a typical coal mine entry is about 18 ft wide, and over

Saylor, John R.

482

NEVADA BUREAU OF MINES AND GEOLOGY SPECIAL PUBLICATION MI-1996  

E-Print Network (OSTI)

gold mines in the United States. Five new mines came into production in 1997: Placer Dome's Pipeline and South Pipeline deposits in Crescent Valley in Lander County (part of the Cortez Mines complex Mountain Mine, 484,430 oz; Placer Dome's Cortez Gold Mines (including Pipeline), 407,973 oz; Independence

Tingley, Joseph V.

483

Analysis of Building Damages of Paste Backfill Mining under Villages  

Science Conference Proceedings (OSTI)

In order to realize coal mining in safety without moving villages, increase coal recovery ratio, solve the conflict of mining and panel relays, the scheme of paste backfill mining under villages in Xiaotun coal mine is executed, and the surface subsidence ... Keywords: Mining under Villages, Paste Backfilling, Damage Assessment, Displacement, Deformation

Chai Hua-bin; Zou You-feng; Guo Wen-bing; Chen Jun-jie

2011-02-01T23:59:59.000Z

484

Longwall mining. 2nd ed.  

Science Conference Proceedings (OSTI)

The book covers US longwall mining technology that was developed and practiced in the US for the past 30 years. It covers all phases of longwall technology in 14 chapters. Each chapter is devoted to a subsystem of equipment or engineering technology. Each chapter begins with a brief introduction on the historical trends of development of the subsystem equipment or engineering technology, followed by a detailed description of the subsystem and engineering technology as they are practiced in the US today.

Peng, S.S.

2006-10-15T23:59:59.000Z

485

Clean Energy Manufacturing Resources - Technology Feasibility | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Feasibility Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Find resources to help you evaluate the feasibility of your idea for a new clean energy technology or product. For determining feasibility, areas to consider include U.S. Department of Energy (DOE) priorities, licensing, R&D funding, and strategic project partnerships. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Learn About U.S. Department of Energy Priorities Advanced Manufacturing Office Plans - features information on analysis, plan implementations, and commercial outcomes. Bioenergy Technologies Office Plans - includes technology roadmaps, multiyear program plans, analysis, and more.

486

Advanced Manufacturing Jobs and Innovation Accelerator Challenge |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Assistance » Advanced Manufacturing Jobs and Innovation Technical Assistance » Advanced Manufacturing Jobs and Innovation Accelerator Challenge Advanced Manufacturing Jobs and Innovation Accelerator Challenge October 10, 2013 - 12:01pm Addthis The Advanced Manufacturing Jobs and Innovation Accelerator Challenge (Accelerator) is a multi-agency sponsored competition established to enhance existing regional networks of firms and institutions that accelerate technology-related innovation, business formation, and job creation. Funding provided to these regional networks (also called clusters) help academia, utilities, local governments, and private industry and investors expand partnerships, share strategic information more efficiently, and reduce costs by leveraging existing assets and resources (like physical facilities and equipment).

487

Manufacturing Licenses Available | Tech Transfer | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Manufacturing SHARE Manufacturing 200401490 Production of Materials with Superior Properties Utilizing High Magnetic Field (Related ID # 200501531, 200701867, 200802085, 200902312, 201002455, 201102675) 200701900 Robust Digital Valve for Prosthetic Finger, Microsurgery, Robotics (Related ID # 200701983, 200802088) 200701972 Manufacturing Biodiesel from Triglycerides (Related ID # 200702012, 200802186) 200701983 Meso-scale Fluidic Digital Valve 200802083 A Hydraulic Flow Control Device by Means of a Digital Poppet Valve 200802088 Miniature shape memory alloy fluid control valve 200902224 Glass Drawing for Wire Arrays 200902231 Nano/Micro Vacuum Triodes Using Glass Fiber Drawing Methods 200902291 Method of Machining Carbon and Graphite foams 200902309 Multi-Winding Homopolar Electric Machine Offers

488

Designing a National Network for Manufacturing Innovation  

Science Conference Proceedings (OSTI)

... Advanced Manufacturing National Program Office (housed at DOC ... “20% of output of 3D printers is now ... By 2020 it may be 50%.” – The Economist ...

2013-10-30T23:59:59.000Z

489

FACTSHEET: Next Generation Power Electronics Manufacturing Innovation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

today announces the selection of North Carolina State University to lead a public-private manufacturing innovation institute for next generation power electronics....

490

Digital Manufacturing and Design Innovation (DMDI) Institute  

Science Conference Proceedings (OSTI)

... automation, sensing and control with a transformed manufacturing workforce at ... in the marketplace, and ensuring the cyber physical security of the ...

2013-05-08T23:59:59.000Z

491

Mechanical Properties of Additive Manufactured Materials and ...  

Science Conference Proceedings (OSTI)

Oct 18, 2011 ... Recently, ONR started a basic research program, cyber-enabled manufacturing systems (CeMS), that adds a computational “architecture” layer ...

492

Advanced Manufacturing Office: Workforce Development and Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Development and Training Professional Development Enhance your career by developing skills in manufacturing energy efficiency. A variety of opportunities and certifications are...

493

STATEMENT OF CONSIDERATIONS REQUEST BY MOTOROLA MANUFACTURING...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and methods, such as production scheduling, automation, Computer Integrated Manufacture (CIM), quality control, materials inventory management and staffing that are necessary over...

494

Manufacturing Extension Partnership Awards Grant to Support ...  

Science Conference Proceedings (OSTI)

... “Our region is home to a significant asset and ... “SME manufacturers are true innovators and contribute substantial value to the region's economic ...

2010-09-28T23:59:59.000Z

495

Manufacturing Energy Consumption Survey (MECS) - Analysis ...  

U.S. Energy Information Administration (EIA)

The gross output for the petroleum and coal products subsector grew by about 3 percent, ... Manufacturing Energy Consumption Survey, MECS Definition of Fuel Use, ...

496

Solid Oxide Fuel Cell Manufacturing Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen and Fuel Cell Technologies Manufacturing R&D Workshop August 11-12, 2011 Washington, DC Mark Richards, Eric Tang, Randy Petri Copyright 2011 Versa Power...

497

Data Analytics for Materials Science and Manufacturing  

Science Conference Proceedings (OSTI)

Surya R. Kalidindi, Georgia Institute of Technology ... and Manufacturing field in order to facilitate communication and collaboration among the various camps.

498

Upcoming Funding Opportunity for Tower Manufacturing and ...  

... and Lower Cost of Energy" intends to support partnerships leading to innovative designs and processes for wind turbine tower manufacturing and ...

499

Advanced Manufacturing Office: About the Office  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

collapse processing steps to lower the energy intensity of manufactured products. Next-Generation Materials cut energy use and provide new functional properties that enable...

500

Rationales and mechanisms for revitalizing US manufacturing ...  

Science Conference Proceedings (OSTI)

Page 1. Rationales and mechanisms for revitalizing US manufacturing R&D strategies Gregory Tassey © US Government 2010 ... R&D R&D 30.2% ...

2013-07-31T23:59:59.000Z