Powered by Deep Web Technologies
Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

DOE Offers Support for Innovative Manufacturing Plant That Will Produce  

Broader source: Energy.gov (indexed) [DOE]

Support for Innovative Manufacturing Plant That Will Support for Innovative Manufacturing Plant That Will Produce High Quality Solar Silicon at Low Cost DOE Offers Support for Innovative Manufacturing Plant That Will Produce High Quality Solar Silicon at Low Cost June 16, 2011 - 12:00am Addthis Washington D.C. - U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment for a $275 million loan guarantee to Calisolar Inc. to commercialize its innovative solar silicon manufacturing process. Calisolar's innovative process should produce silicon for use in solar cells at less than half the cost of traditional polysilicon purification processes, which will reduce the overall cost of solar modules and panels. At full production, the manufacturing plant is expected to produce 16,000 metric tons (MT) of solar silicon annually, equivalent to

2

Department of Energy Offers Support for an Oregon Solar Manufacturing  

Broader source: Energy.gov (indexed) [DOE]

an Oregon Solar an Oregon Solar Manufacturing Project Department of Energy Offers Support for an Oregon Solar Manufacturing Project February 17, 2011 - 12:00am Addthis Washington D.C. --- U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment to SoloPower, Inc. for a $197 million loan guarantee to support the retrofit of an existing building and installation of additional equipment to operate a thin-film solar panel manufacturing facility in Wilsonville, Oregon. When completed and at full capacity, the facility is expected to produce over 400 megawatts of flexible photovoltaic (PV) panels annually. According to SoloPower estimates, the project will create approximately 500 permanent jobs and 270 construction jobs. "Investments like these are going to help America become a world leader

3

Energy Department Offers $25 Million for U.S. Solar Manufacturing...  

Energy Savers [EERE]

Energy Department Offers 25 Million for U.S. Solar Manufacturing Energy Department Offers 25 Million for U.S. Solar Manufacturing February 19, 2014 - 12:00am Addthis The Energy...

4

Six Manufacturers to Offer Natural-Gas-Powered Trucks in 1996  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

ix truck manufacturers will offer ix truck manufacturers will offer natural-gas-powered versions of their medium- and heavy-duty trucks in 1996, according to the Gas Research Institute (GRI). The trucks will be the first fully dedicated natural gas vehicles (NGVs) offered in U.S. medium- and heavy-duty markets by original equipment manufacturers (OEMs). Four manufacturers will design trucks to operate on liquefied natural gas (LNG), and one manufacturer will design trucks to run on compressed natural gas (CNG). These manufacturers will join Volvo GM Heavy Truck Corporation, which has announced plans to manufacture an NGV refuse hauler, the Xpeditor. The refuse hauler will be available in LNG and CNG versions. "The availability of OEM- produced trucks is a significant development for GRI and the gas

5

Advances in solar photovoltaics are urgently needed to increase the performance and reduce the cost of harvesting solar power. Solution-processed photovoltaics are cost-effective to manufacture and offer the potential for physical flexibility.  

E-Print Network [OSTI]

, Toronto, M5S 3G4, Canada. O ne hundred and twenty thousand terawatts of solar power irradiate EarthAdvances in solar photovoltaics are urgently needed to increase the performance and reduce the cost of harvesting solar power. Solution-processed photovoltaics are cost-effective to manufacture and offer

6

Manufacturing  

Office of Environmental Management (EM)

Flow of Materials through Industry Sustainable 1 Manufacturing 2 Technology Assessment 3 Contents 4 1. Introduction to the TechnologySystem ......

7

Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Manufacturing DUF6 Health Risks line line Accidents Storage Conversion Manufacturing Disposal Transportation Manufacturing of Products Containing Depleted Uranium Discussion of risks and possible impacts associated with fabrication of representative products containing depleted uranium. Beneficial Uses Risk Evaluation The Department has initiated the Depleted Uranium Uses Research and Development Program to explore the potential beneficial uses of the depleted uranium (DU), fluorine, and empty carbon steel DUF6 storage cylinders for effective use of resources and to achieve cost savings to the government. A number of tasks have been initiated related to uses of DU as a shielding material, catalyst, and as a semi-conductor material in electronic devices. An evaluation of the risks associated with the release

8

Offered: Offered: Position(s): Position(s)  

E-Print Network [OSTI]

Company: Industry: Website: Majors: Offered: Offered: Position(s): Position(s): Description and in manufacturing problems associated with the inspection and testing of products. - Establishes operating equipment with design personnel to ensure that processes and designs are compatible. - Reviews and evaluates engineering

New Hampshire, University of

9

Fact #830: July 21, 2014 Diesel Light Vehicle Offerings Expand  

Broader source: Energy.gov [DOE]

The number of diesel light vehicles offered for sale by manufacturers has grown since 2000. In model year (MY) 2000 there were only 3 diesel models offered by one manufacturer (VW), but by MY 2014...

10

Process systems engineering of continuous pharmaceutical manufacturing  

E-Print Network [OSTI]

Continuous manufacturing offers a number of operational and financial benefits to pharmaceutical companies. This research examines the critical blending step for continuous pharmaceutical manufacturing and the characteristics ...

Abel, Matthew J

2010-01-01T23:59:59.000Z

11

A National Strategic Plan For Advanced Manufacturing  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

across hundreds of sites and thousands of users through conventional social network media and (2) deploy digitally programmable manufacturing equipment to 1,000 high schools....

12

Manufacturing News | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Manufacturing News Manufacturing News RSS August 3, 2011 Department of Energy Announces Philips Lighting North America as Winner of L Prize Competition Philips Product Delivers on Department's Challenge to Replace Common Light Bulb with Energy-Saving Lighting Alternative August 2, 2011 Department of Energy to Invest $50 Million to Advance Domestic Solar Manufacturing Market, Achieve SunShot Goal SUNPATH Program Will Boost American Competitiveness, Lower Cost of Solar Energy June 29, 2011 Department of Energy Announces New Partnerships to Support Manufacturing Job Training National Training and Education Resource (NTER) Offers Tools to Train Workers June 24, 2011 Department of Energy Announces $120 Million to Support Development of Innovative Manufacturing Processes

13

President Obama Announces $400 Million Conditional Commitment Offer to  

Broader source: Energy.gov (indexed) [DOE]

$400 Million Conditional Commitment Offer $400 Million Conditional Commitment Offer to Support Solar Panel Manufacturing President Obama Announces $400 Million Conditional Commitment Offer to Support Solar Panel Manufacturing July 3, 2010 - 12:00am Addthis Washington D.C. - In his weekly video address, President Obama today announced the offer of a conditional commitment for a loan guarantee of $400 million to Abound Solar Manufacturing, LLC to manufacture state-of-the-art thin-film solar panels. This will be the first time this new manufacturing technology for Cadmium-Telluride panels is deployed commercially anywhere in the world. Funded by the American Recovery and Reinvestment Act, this project includes two facilities, one in Longmont, Colorado and the other in Tipton, Indiana. The Indiana facility will

14

Manufacturing News  

Broader source: Energy.gov (indexed) [DOE]

news Office of Energy Efficiency & news Office of Energy Efficiency & Renewable Energy Forrestal Building 1000 Independence Avenue, SW Washington, DC 20585 en FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute http://energy.gov/articles/factsheet-next-generation-power-electronics-manufacturing-innovation-institute manufacturing-innovation-institute" class="title-link">FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute

15

Recovery Act Funding Hundreds of Jobs in California | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Recovery Act Funding Hundreds of Jobs in California Recovery Act Funding Hundreds of Jobs in California Recovery Act Funding Hundreds of Jobs in California May 14, 2010 - 11:54am Addthis Lindsay Gsell What does this project do? On top of producing clean, renewable energy, the two projects will create an estimated 500 jobs during the next few years. Solar Power, Inc. of Roseville, Calif., does almost everything in solar photovoltaics - from manufacturing and testing to home solar panel installation kits to utility-scale solar farms. The company is using its expertise to plan two contrasting projects using bonds awarded by Sacramento County. Funded by the Recovery Act, the $24.7 million will finance a facility to build SPI's solar panels. At a separate location in the county, the company also plans a 16-MW solar

16

Recovery Act Funding Hundreds of Jobs in California | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Funding Hundreds of Jobs in California Funding Hundreds of Jobs in California Recovery Act Funding Hundreds of Jobs in California May 14, 2010 - 11:54am Addthis Lindsay Gsell What does this project do? On top of producing clean, renewable energy, the two projects will create an estimated 500 jobs during the next few years. Solar Power, Inc. of Roseville, Calif., does almost everything in solar photovoltaics - from manufacturing and testing to home solar panel installation kits to utility-scale solar farms. The company is using its expertise to plan two contrasting projects using bonds awarded by Sacramento County. Funded by the Recovery Act, the $24.7 million will finance a facility to build SPI's solar panels. At a separate location in the county, the company also plans a 16-MW solar array, generating clean energy to be sold to a local utility.

17

MST: Organizations: Precision Meso Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Precision Meso Manufacturing Precision Meso Manufacturing Many engineers and product realization teams at Sandia National Laboratories are currently engaged in efforts to create revolutionary national security products that feature unprecedented functionality in ever-smaller, more portable configurations. In the course of development, the Sandia technology community has realized the need for manufacturing capabilities that expand upon what traditional microfabrication provides. The term “meso,” derived from the Greek mesos, meaning “intermediate” or “in the middle,” describes operations on a length scale that typically ranges from hundreds of micrometers to one centimeter. Meso Manufacturing involves a suite of innovative fabrication and metrology tools that compliment each other to make these products a reality. The Meso

18

Manufacturing technology  

SciTech Connect (OSTI)

The specific goals of the Manufacturing Technology thrust area are to develop an understanding of fundamental fabrication processes, to construct general purpose process models that will have wide applicability, to document our findings and models in journals, to transfer technology to LLNL programs, industry, and colleagues, and to develop continuing relationships with industrial and academic communities to advance our collective understanding of fabrication processes. Advances in four projects are described here, namely Design of a Precision Saw for Manufacturing, Deposition of Boron Nitride Films via PVD, Manufacturing and Coating by Kinetic Energy Metallization, and Magnet Design and Application.

Blaedel, K.L.

1997-02-01T23:59:59.000Z

19

The Future of Additive Manufacturing in Facade design: a strategic roadmap towards a preferable future:.  

E-Print Network [OSTI]

??Additive manufacturing (AM) is a relatively new discipline that offers great potential for designers in every industry. When further developed, this new method of manufacturing, (more)

Volkers, J.N.

2010-01-01T23:59:59.000Z

20

JGI - Product Offerings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Product Offerings Product Offerings Scientific Program Product Brief Description Deliverables FY14 target cycle time (median), days FY14 target cycle time (75th %), days Fungal Minimal Draft Low coverage whole genome shotgun sequencing for evaluation. May turn into a standard draft or improved standard draft. Assembly. Annotation optional (JGI portal); raw data submitted to SRA 250 400 Fungal Resequencing SNP and short indel calls, rearrangement detection, population analysis. Text file of SNPs (incl location in genome, coding/vs non, syn vs non-syn aa change etc) and structural rearrangements, alignment files, tracks for upload to genome browser and fastq files; raw data submitted to SRA 140 200 Fungal Standard Draft Whole genome shotgun sequencing. Exact scope items and quality of finished product depend on genome. Selected genomes will be improved based on feasibility and scientific merit. Assembly, annotation (JGI Portal + Genbank); raw data submitted to SRA 250 400

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

China Information Service Offered  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

China Information Service Offered China Information Service Offered The Energy Analysis Program is proposing to launch a multiclient service, tentatively called the China Energy Information Service, that would draw upon EAP's extensive research on China's energy sector and its strong working relationships with Chinese policymakers and researchers. The service would provide private U.S. firms with the information they need to market their energy-related products, technologies, and services in China. For an annual fee of less than $15,000, participants would be entitled to: Annual updates of EAP's China Databook covering China's energy supply, use, investment, and other related statistics. Bimonthly topical reports on subjects to be chosen in consultation with advisory committees composed of the service's subscribers.

22

Additive Manufacturing: Implications on Research and Manufacturing  

E-Print Network [OSTI]

Additive Manufacturing: Implications on Research and Manufacturing With recent developments, etc.), additive manufacturing (AM) has the potential to become a transformative technology in innovation-based manufacturing. Agencies such as the Department of Defense, the National Science Foundation

Crawford, T. Daniel

23

Additive Manufacturing : Changing the Rules of Manufacturing  

Science Journals Connector (OSTI)

Aspects of 3D printing and additive or layer manufacturing can be treated as modular manufacturing or modular components of manufacturing in the contemporary sense. Such modular manufacturing involves specialized...

2014-06-01T23:59:59.000Z

24

Offered: Offered: Position(s): Position(s)  

E-Print Network [OSTI]

processes and procedures, and providing technical expertise/support to manufacturing. Additional tasks may with engineering tasks including participating in new product/process development, establishing manufacturing involvement, and product studies. www.tbvc.com Manufacturing Company Overview: Degree: Paid Fall, Spring

New Hampshire, University of

25

Standard Offer Programs Study  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Irwin Irwin Industries of the Future - West Virginia West Virginia University National Research Center for Coal & Energy Carl Irwin Industries of the Future - West Virginia West Virginia University National Research Center for Coal & Energy 2 nd Annual Energy & Innovation Conference November 28-29, 2012 November 14-16, 2012 www.TransTechEnergy.org  Move us along the pathway to a low-carbon, industrially competitive, clean energy economy of the future.  Examples include waste heat recovery, CHP, efficiency, new processes for shale gas to chemical feedstocks and fuels, advanced manufacturing processes such as 3-D printing and robotics, hybrid fossil/renewable systems, productive uses of CO 2 , ...  5 external reviews of each application

26

Southwest U.S. undergoes megadroughts lasting hundreds of years  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Southwest U.S. undergoes megadroughts lasting hundreds of years Southwest U.S. undergoes megadroughts lasting hundreds of years Southwest U.S. undergoes megadroughts lasting hundreds of years Sediment core 260-feet long peers back in climatological time. February 28, 2012 Desert landscape According to their findings, the Southwestern region of the United States apparently undergoes "megadroughts"-warmer, drier periods lasting hundreds of years or more. These megadroughts appear in cycles, with the most recent one comprising a present-day period that included the historic Dust Bowl. According to their findings, the Southwestern region of the United States apparently undergoes "megadroughts"-warmer, drier periods lasting hundreds of years or more. Southwest undergoes megadroughts lasting hundreds of years

27

Southwest U.S. undergoes megadroughts lasting hundreds of years  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Southwest U.S. undergoes megadroughts lasting hundreds of years Sediment core 260-feet long peers back in climatological time. February 28, 2012 Desert landscape According to their...

28

Fuel Cell Manufacturing: American Energy and Manufacturing Competitive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Presentation on...

29

Manufacturing Perspective  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 BOEING is a trademark of Boeing Management Company. Copyright © 2009 Boeing. All rights reserved. Compressed Hydrogen Storage Workshop Manufacturing Perspective Karl M. Nelson (karl.m.nelson@boeing.com) Boeing Research & Technology Engineering, Operations & Technology | Boeing Research & Technology Materials & Fabrication Technology EOT_RT_Sub_Template.ppt | 1/12/2009 | Structural Tech 2 Copyright © 2009 Boeing. All rights reserved. DOE Hydrogen Program Development of Advanced Manufacturing Technologies for Low Cost Hydrogen Storage Vessels Mark Leavitt, Alex Ly Quantum Fuel Systems Technologies Worldwide Inc. Karl Nelson, Brice Johnson The Boeing Company Ken Johnson, Kyle Alvine, Stan Pitman, Michael Dahl, Daryl Brown

30

Green Manufacturing  

SciTech Connect (OSTI)

Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

Patten, John

2013-12-31T23:59:59.000Z

31

Mechanical and Manufacturing Engineering Petroleum Engineering Minor  

E-Print Network [OSTI]

Mechanical and Manufacturing Engineering Petroleum Engineering Minor The Department of Mechanical and Manufacturing Engineering offers a minor in petroleum engineering within the mechanical engineering major program. This minor builds on the fundamentals provided by a basis in mechanical engineering and adds

Calgary, University of

32

Manufacturing Glossary  

Gasoline and Diesel Fuel Update (EIA)

Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Home > Energy Users > Energy Efficiency Page > Glossary for the Manufacturing Sector Glossary For the Manufacturing Sector Barrel: A volumetric unit of measure equivalent to 42 U.S. gallons. Biomass: Organic nonfossil material of biological origin constituting a renewable energy source. Blast Furnace: A shaft furnace in which solid fuel (coke) is burned with an air blast to smelt ore in a continuous operation. Blast Furnace Gas: The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to metallic iron. It is commonly used as a fuel within the steel works. Boiler Fuel: An energy source to produce heat that is transferred to the boiler vessel in order to generate steam or hot water. Fossil fuels are the primary energy sources used to produce heat for boilers.

33

Science Saturdays attract hundreds of students for lectures,...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Science Saturdays attract hundreds of students for lectures, tours New ORNL-ORAU program wraps up its first year ORNL's Clarina De la Cruz (left) gives a tour of the Spallation...

34

Manufacturing Licenses Available | Tech Transfer | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Manufacturing SHARE Manufacturing 200401490 Production of Materials with Superior Properties Utilizing High Magnetic Field (Related ID # 200501531, 200701867, 200802085, 200902312, 201002455, 201102675) 200701900 Robust Digital Valve for Prosthetic Finger, Microsurgery, Robotics (Related ID # 200701983, 200802088) 200701972 Manufacturing Biodiesel from Triglycerides (Related ID # 200702012, 200802186) 200701983 Meso-scale Fluidic Digital Valve 200802083 A Hydraulic Flow Control Device by Means of a Digital Poppet Valve 200802088 Miniature shape memory alloy fluid control valve 200902224 Glass Drawing for Wire Arrays 200902231 Nano/Micro Vacuum Triodes Using Glass Fiber Drawing Methods 200902291 Method of Machining Carbon and Graphite foams 200902309 Multi-Winding Homopolar Electric Machine Offers

35

Offered: Offered: Position(s): Position(s)  

E-Print Network [OSTI]

Company: Industry: Website: Majors: Offered: Offered: Position(s): Position(s): Description. Contribute to or perform testing and evaluation to satisfy task goal. Initiate, coordinate, participate October 22, 2013 -- 12:00-4:00pm Yes Mechanical Design Engineer Goss International is a global leader

New Hampshire, University of

36

Offered: Offered: Position(s): Position(s)  

E-Print Network [OSTI]

-- 12:00-4:00pm Yes Civil/Environmental Engineer At Wright-Pierce, we believe that employee success of their class, we offer a high performance work environment, where teamwork and advanced professional growth offer careers with every level of responsibility, accountability, and visibility. We strongly believe

Pringle, James "Jamie"

37

Smart Meters Helping Oklahoma Consumers Save Hundreds During Summer Heat |  

Broader source: Energy.gov (indexed) [DOE]

Smart Meters Helping Oklahoma Consumers Save Hundreds During Summer Smart Meters Helping Oklahoma Consumers Save Hundreds During Summer Heat Smart Meters Helping Oklahoma Consumers Save Hundreds During Summer Heat July 26, 2011 - 4:27pm Addthis Small business owner Steve Kaplan told ABC News’ “Show Me the Money” on Good Morning America that he's saving over $320 per month compared to last summer, which they calculated could result in $1,300 a year. Small business owner Steve Kaplan told ABC News' "Show Me the Money" on Good Morning America that he's saving over $320 per month compared to last summer, which they calculated could result in $1,300 a year. Liisa O'Neill Liisa O'Neill Former New Media Specialist, Office of Public Affairs What does this mean for me? Utility-provided meters give consumers real-time information on how

38

Innovative High Energy Density Capacitor Design Offers Potential for Clean  

Broader source: Energy.gov (indexed) [DOE]

Innovative High Energy Density Capacitor Design Offers Potential Innovative High Energy Density Capacitor Design Offers Potential for Clean Energy Applications Innovative High Energy Density Capacitor Design Offers Potential for Clean Energy Applications June 10, 2011 - 4:46pm Addthis Similar system to the clustering tool that will manufacture TroyCap’s High Energy Density Nanolaminate Capacitor | Credit: TroyC Similar system to the clustering tool that will manufacture TroyCap's High Energy Density Nanolaminate Capacitor | Credit: TroyC Ben Squires Analyst, Office of Energy Efficiency & Renewable Energy Can you imagine a photovoltaic module that's able to generate and store electricity on its own? Or an electric vehicle (EV) powered by a technology more durable than the advanced batteries in today's EVs? Malvern,

39

Innovative High Energy Density Capacitor Design Offers Potential for Clean  

Broader source: Energy.gov (indexed) [DOE]

High Energy Density Capacitor Design Offers Potential High Energy Density Capacitor Design Offers Potential for Clean Energy Applications Innovative High Energy Density Capacitor Design Offers Potential for Clean Energy Applications June 10, 2011 - 4:46pm Addthis Similar system to the clustering tool that will manufacture TroyCap’s High Energy Density Nanolaminate Capacitor | Credit: TroyC Similar system to the clustering tool that will manufacture TroyCap's High Energy Density Nanolaminate Capacitor | Credit: TroyC Ben Squires Analyst, Office of Energy Efficiency & Renewable Energy Can you imagine a photovoltaic module that's able to generate and store electricity on its own? Or an electric vehicle (EV) powered by a technology more durable than the advanced batteries in today's EVs? Malvern, Pennsylvania's TroyCap, LLC is using nanolaminate technology patented by

40

CenterPoint Energy - Commercial and Industrial Standard Offer Program |  

Broader source: Energy.gov (indexed) [DOE]

CenterPoint Energy - Commercial and Industrial Standard Offer CenterPoint Energy - Commercial and Industrial Standard Offer Program CenterPoint Energy - Commercial and Industrial Standard Offer Program < Back Eligibility Commercial Industrial Institutional Local Government Nonprofit Schools State Government Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Manufacturing Home Weatherization Insulation Design & Remodeling Maximum Rebate Standard Offer: 20% of the annual incentive budget. Retro-Commissioning: up to $10,000 with matching customer contribution with simple payback in three years. Program Info State Texas Program Type Utility Rebate Program Rebate Amount Standard Offer Lighting (Fluorescent, HID, CFL): $120/kW; $0.04/kWh

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

The President's Manufacturing Initiative  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The President's The President's Manufacturing Initiative Manufacturing Initiative Roadmap Workshop on Roadmap Workshop on Manufacturing R&D for Manufacturing R&D for the Hydrogen Economy the Hydrogen Economy Washington, D.C. Washington, D.C. July 13, 2005 July 13, 2005 Dale Hall Dale Hall Acting Chair, Interagency Working Group on Acting Chair, Interagency Working Group on Manufacturing Research and Development Manufacturing Research and Development National Science and Technology Council National Science and Technology Council and and Director, Manufacturing Engineering Laboratory Director, Manufacturing Engineering Laboratory National Institute of Standards and Technology National Institute of Standards and Technology U.S. Department of Commerce U.S. Department of Commerce

42

Metrics for Sustainable Manufacturing  

E-Print Network [OSTI]

a system or process in maintaining a sustainable level of afor manufacturing processes to achieve truly sustainablesustainable phase of the automobile manufacturing process

Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

2008-01-01T23:59:59.000Z

43

Advanced Manufacturing Office Overview  

Broader source: Energy.gov [DOE]

Overview presentation by the Advanced Manufacturing Office for the Microwave (MW) and Radio Frequency (RF) as Enabling Technologies for Advanced Manufacturing

44

Additive Manufacturing Technology Assessment  

Office of Environmental Management (EM)

subtractive manufacturing 41 methods 1. Additive manufacturing is also called as 3D printing, 42 additive fabrication, or freeform fabrication. These new 43 techniques, while...

45

Additive Manufacturing Technologies  

Science Journals Connector (OSTI)

Rapid Prototyping is the construction of complex three-dimensional parts using additive manufacturing technology.

Jrgen Stampfl; Markus Hatzenbichler

2014-01-01T23:59:59.000Z

46

Business Energy Efficiency Rebates (Offered by 16 Utilities) | Department  

Broader source: Energy.gov (indexed) [DOE]

Business Energy Efficiency Rebates (Offered by 16 Utilities) Business Energy Efficiency Rebates (Offered by 16 Utilities) Business Energy Efficiency Rebates (Offered by 16 Utilities) < Back Eligibility Commercial Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Manufacturing Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Program Info State Iowa Program Type Utility Rebate Program Rebate Amount Varies by technology, see program web site. Provider Missouri River Energy Services Bright Energy Solutions offers energy efficiency cash incentive programs to [http://www.dsireusa.org/incentives/incentive.cfm?Incentive_Code=IA81F&re... residential] and business customers of municipal utilities that are members of Missouri River Energy Services. In Iowa, this includes:

47

Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Science & Innovation » Energy Efficiency » Manufacturing Science & Innovation » Energy Efficiency » Manufacturing Manufacturing Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. Manufacturing is the lifeblood of the American economy -- providing jobs for hard working American families and helping increase U.S. competitiveness in the global marketplace. The Energy Department is committed to growing America's manufacturing industry by helping companies become leaders in the production of clean energy technologies like electric vehicles, LED bulbs and solar panels. The

48

Offered: Offered: Position(s): Position(s)  

E-Print Network [OSTI]

exchange under the symbol PCCC. Today, our more than 1,900 employees work in three offices in New Hampshire and focusing on customer service was as important as low prices. Using their personal savings, they purchased 1998, the company conducted an Initial Public Offering; today, our stock is traded on the NASDAQ

New Hampshire, University of

49

Rural Electric Cooperatives Energy Efficiency Rebate Programs (Offered by  

Broader source: Energy.gov (indexed) [DOE]

Rural Electric Cooperatives Energy Efficiency Rebate Programs Rural Electric Cooperatives Energy Efficiency Rebate Programs (Offered by 12 Utilities) Rural Electric Cooperatives Energy Efficiency Rebate Programs (Offered by 12 Utilities) < Back Eligibility Agricultural Commercial Industrial Residential Savings Category Other Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Home Weatherization Construction Commercial Weatherization Design & Remodeling Heat Pumps Commercial Lighting Lighting Manufacturing Water Heating Solar Program Info State Iowa Program Type Utility Rebate Program Rebate Amount Varies by utility and equipment type Provider Central Iowa Power Cooperative The Central Iowa Power Cooperative (CIPCO) is a generation and transmission cooperative serving 12 rural electric cooperatives (REC) and one municipal

50

Cooperative pulses Technologieangebot /Technology offer  

E-Print Network [OSTI]

on issues from the national and international research and technology transfer. To market the patentsCooperative pulses Technologieangebot /Technology offer Referenz /Reference 2010-04E04 Branche at the TUM TUM ForTe Forschungsförderung & Technologie- transfer Patent- und Lizenzbüro Arcisstra?e 2180333

51

Placement Offer Form EMPLOYER INFORMATION  

E-Print Network [OSTI]

, team games and tennis. There is also a gymnastics hall, spinning hall, swimming-pool, three fitness. Moreover, the university-college offers three full-dimension sports halls used for training martial arts halls. Józef Rusiecki Olsztyn University College has its own stadium with artificial grass, tartan track

Chamzas, Christodoulos

52

Energy-Efficient Manufactured Homes | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufactured Homes Manufactured Homes Energy-Efficient Manufactured Homes June 24, 2013 - 10:20am Addthis There are many opportunities to improve the energy efficiency of manufactured homes. | Photo courtesy of ©iStockphoto.com/Marje There are many opportunities to improve the energy efficiency of manufactured homes. | Photo courtesy of ©iStockphoto.com/Marje What does this mean for me? Manufactured homes (formerly called mobile homes) mean affordable housing for many Americans. Newer manufactured homes offer amenities found in site-built homes, and can be retrofitted to improve energy efficiency and incorporate renewable energy technologies. Like site-built homes, new manufactured homes (formerly known as mobile homes) can be designed for energy efficiency and renewable energy. You can

53

Energy-Efficient Manufactured Homes | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufactured Homes Manufactured Homes Energy-Efficient Manufactured Homes June 24, 2013 - 10:20am Addthis There are many opportunities to improve the energy efficiency of manufactured homes. | Photo courtesy of ©iStockphoto.com/Marje There are many opportunities to improve the energy efficiency of manufactured homes. | Photo courtesy of ©iStockphoto.com/Marje What does this mean for me? Manufactured homes (formerly called mobile homes) mean affordable housing for many Americans. Newer manufactured homes offer amenities found in site-built homes, and can be retrofitted to improve energy efficiency and incorporate renewable energy technologies. Like site-built homes, new manufactured homes (formerly known as mobile homes) can be designed for energy efficiency and renewable energy. You can

54

Benton PUD - Energy Efficient Manufactured Homes Rebate Program |  

Broader source: Energy.gov (indexed) [DOE]

Manufactured Homes Rebate Program Manufactured Homes Rebate Program Benton PUD - Energy Efficient Manufactured Homes Rebate Program < Back Eligibility Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info Expiration Date 09/31/2015 State District of Columbia Program Type Utility Rebate Program Rebate Amount $750 Provider Benton PUD Benton PUD offers a $750 rebate to purchasers of Energy Star manufactured homes. Homes must be electrically heated and located in Benton PUD's service territory to receive the rebate. The rebate application is located on the program website. The website also offers a list of mobile home dealers in the area that offer Energy Star manufactured homes. Contact

55

Faculty of Engineering Industrial and Manufacturing  

E-Print Network [OSTI]

Faculty of Engineering Industrial and Manufacturing Systems Engineering Industrial engineers answer the needs of organizations to operate efficiently and cost effectively. As an industrial engineer, you may of Windsor is one of only a few institutions in Ontario to offer industrial engineering. Your education

56

DOE Offers $150 Million Conditional Commitment for a Loan Guarantee to  

Broader source: Energy.gov (indexed) [DOE]

150 Million Conditional Commitment for a Loan Guarantee 150 Million Conditional Commitment for a Loan Guarantee to Support Breakthrough Solar Manufacturing Process DOE Offers $150 Million Conditional Commitment for a Loan Guarantee to Support Breakthrough Solar Manufacturing Process June 17, 2011 - 12:00am Addthis Washington D.C. - U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment for a $150 million loan guarantee to 1366 Technologies, Inc. for the development of a multicrystalline wafer manufacturing project. The project will be capable of producing approximately 700 to 1,000 megawatts (MW) of silicon-based wafers annually using a revolutionary manufacturing process called Direct Wafer. The innovative process could reduce manufacturing costs of the wafers by approximately 50 percent, dramatically cutting the cost of solar power.

57

Laser Technology: Additive Manufacturing  

Science Journals Connector (OSTI)

Selective Laser Sintering, and in general Additive Manufacturing Processes are becoming mature technologies; in the ... systems that are even utilized for direct parts manufacturing. However, the parts final user...

Srichand Hinduja; Lin Li

2013-01-01T23:59:59.000Z

58

The Advanced Manufacturing Partnership  

E-Print Network [OSTI]

;ve Manufacturing Technologies (led by Dow, Honeywell and MIT) Manufacturing Ins;tutes (led, Honeywell and MIT GOALS § To launch public-private ini:a:ves to advance transforma

Das, Suman

59

Manufacturing Innovation Topics Workshop  

Broader source: Energy.gov [DOE]

The Advanced Manufacturing Office (AMO) and the Office of the Secretary of Defense Manufacturing Technology Program (OSD ManTech) will host a workshop to discuss AMO's recent Request for Information (RFI) on Clean Energy Manufacturing Topic Areas as well as the recent areas of interest announced by OSD ManTech for a new Manufacturing Innovation Institute on October 8-9, 2014 in Fort Worth, TX.

60

Savings by Design (Offered by five Utilities) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Savings by Design (Offered by five Utilities) Savings by Design (Offered by five Utilities) Savings by Design (Offered by five Utilities) < Back Eligibility Commercial Construction Industrial Nonprofit Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Manufacturing Water Heating Windows, Doors, & Skylights Solar Maximum Rebate Whole Building (owner): $150,000 Whole Building (designer): $50,000 Systems (owner): $150,000 All incentives are limited to 75% of the incremental cost Program Info State California Program Type Utility Rebate Program Rebate Amount '''Whole Building Approach (owner)''' $0.10 - $0.30/annualized kWh savings, $1.00/therm, or $100/peak kW

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit  

Broader source: Energy.gov [DOE]

Presentation on fuel cell manufacturing by Sunita Satyapal at the American Energy and Manufacturing Competitiveness Summit on December 12, 2013.

62

Sharyland Utilities- Commercial Standard Offer Program (Texas)  

Broader source: Energy.gov [DOE]

Sharyland Utilities offers its Commercial Standard Offer Program to encourage business customers of all sizes to pursue energy efficiency measures in their facilities. Incentives are paid directly...

63

Enabling Manufacturing Research through Interoperability  

E-Print Network [OSTI]

sustainable or environmentally benign manufacturing processes andAND SUSTAINABLE FIGURE 8: LIFE-CYCLE OF MANUFACTURING PROCESSES (

Dornfeld, David; Wright, Paul; Helu, Moneer; Vijayaraghavan, Athulan

2009-01-01T23:59:59.000Z

64

Springfield Utility Board - Super Good Cents Manufactured Homes Rebate  

Broader source: Energy.gov (indexed) [DOE]

Springfield Utility Board - Super Good Cents Manufactured Homes Springfield Utility Board - Super Good Cents Manufactured Homes Rebate Program Springfield Utility Board - Super Good Cents Manufactured Homes Rebate Program < Back Eligibility Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Oregon Program Type Utility Rebate Program Rebate Amount $600 Provider Springfield Utility Board The Springfield Utility Board offers a $600 incentive for the purchase of a Super Good Cents Manufactured Home. Super Good Cents Manufactured Homes offer improve comfort and efficiency. The incentive can be sent to the dealer or to the home buyer, depending on what the home buyer indicates on the application form. The [http://www.subutil.com/pdfs/sgcincentiveform.pdf

65

Lane Electric Cooperative - Manufactured Homes Rebate Program | Department  

Broader source: Energy.gov (indexed) [DOE]

Lane Electric Cooperative - Manufactured Homes Rebate Program Lane Electric Cooperative - Manufactured Homes Rebate Program Lane Electric Cooperative - Manufactured Homes Rebate Program < Back Eligibility Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Oregon Program Type Utility Rebate Program Rebate Amount $500 Provider Lane Electric Cooperative Lane Electric Cooperative offers customers an incentive for buying a new EnergyStar manufactured home. These properties must be within the eligible service area and must be a permanent residence. Qualifying customers may receive up to $500 if they submit to Lane Electric the following documentation: The Energy-Star rebate coupon, a copy of the sales receipt,

66

Design for Additive ManufacturingElement transitions and aggregated structures  

Science Journals Connector (OSTI)

Abstract Additive Manufacturing technologies create parts layer by layer. Thereby, lots of benefits are offered. Especially extended design freedoms provide new potentials for the design of technical parts. To make these benefits accessible to different user groups, design rules for Additive Manufacturing were developed within the project Direct Manufacturing Design Rules. Therefore a process independent method was defined first. Next, design rules were developed for Laser Sintering, Laser Melting and Fused Deposition Modeling. The results were summarized in a design rule catalog and support a suitable design for Additive Manufacturing.

Guido A.O. Adam; Detmar Zimmer

2014-01-01T23:59:59.000Z

67

Additive manufacturing with friction welding and friction deposition processes  

Science Journals Connector (OSTI)

Most of the commercially available additive manufacturing processes that are meant for fabrication of fully dense metallic parts involve melting and solidification. Consequently, these processes suffer from a variety of metallurgical problems. Processes that can facilitate material addition in solid-state are therefore ideally suited for additive manufacturing. In this work, we explore two new solid-state processes, viz. friction welding and friction deposition, for additive manufacturing. Stainless steel samples produced using these processes showed excellent layer bonding and Z-direction tensile properties. The authors believe that these processes are uniquely capable and can offer significant benefits over existing commercial additive manufacturing processes.

J.J.S. Dilip; G.D. Janaki Ram; B.E. Stucker

2012-01-01T23:59:59.000Z

68

CIMplementation: Evaluating Manufacturing Automation  

E-Print Network [OSTI]

in the manufacturing organization if CIMplementation~* is to succeed. 1.0 INTRODUCTION There is much discussion today about Com puter Integrated Manufacturing (CIM). Automation tools like Computer Aided Design (CAD) systems, robots, automated material handling...~ Pressing the frontier of technology in one's own manufactur ing facility will not be without its pitfalls. Second, while automation engineers may be able to piece together the technological pieces of a CIM system, they cannot and do not evaluate...

Krakauer, J.

69

Manufacturing Success Stories  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Colorado State University Industrial Assessment Center Saves Manufacturers Money and Trains the Next Generation of Engineers http:energy.goveeresuccess-storiesarticles...

70

Acoustics by additive manufacturing:.  

E-Print Network [OSTI]

??This study focuses on exploring the merging field of additive manufacturing and acoustics and introduces a new type of sound absorber which is regulating performance (more)

Setaki, F.

2012-01-01T23:59:59.000Z

71

Contribution to Nanotechnology Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

shares Nano 50 award for directed assembly September 3, 2008 Contribution to Nanotechnology Manufacturing LOS ALAMOS, New Mexico, September 3, 2008-A team of scientists spanning...

72

Manufacturing Demonstration Facility  

Broader source: Energy.gov (indexed) [DOE]

is key to stroke recovery * Additive manufacturing allows custom fit glove device using brain machine interface to retrain movement * Gloves are light-weight, low cost and...

73

SSL Manufacturing Roadmap  

Broader source: Energy.gov [DOE]

Report detailing DOE Solid-State Lighting Program activities to accelerate manufacturing improvements that reduce costs and enhance the quality of SSL products.

74

Clean Energy Manufacturing Initiative  

Broader source: Energy.gov [DOE]

Manufacturing technologies for cleaner energy generation, distribution, and use represents an important opportunity for U.S. economic growth, energy security, and accelerated innovation. Likewise,...

75

Worldwide Energy and Manufacturing USA Inc formerly Worldwide Manufacturing  

Open Energy Info (EERE)

Manufacturing USA Inc formerly Worldwide Manufacturing Manufacturing USA Inc formerly Worldwide Manufacturing USA Jump to: navigation, search Name Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA) Place San Bruno, California Zip 94066 Product Worldwide Manufacturing USA is an engineering company based in San Bruno, California. References Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA) is a company located in San Bruno, California . References ↑ "Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)"

76

Catalyst Manufacturing Science and  

E-Print Network [OSTI]

Catalyst Manufacturing Science and Engineering Consortium (CMSEC) Rutgers University New Jersey, U, automotive, and energy industries makes and/or uses catalysts, there has been no academic program focusing on the operations required to make catalytic materials. Thus, catalyst manufacturing processes are often designed

77

Department of Energy Offers Severstal Dearborn, LLC a $730 Million  

Broader source: Energy.gov (indexed) [DOE]

Severstal Dearborn, LLC a $730 Million Severstal Dearborn, LLC a $730 Million Conditional Loan Commitment for Michigan Project Department of Energy Offers Severstal Dearborn, LLC a $730 Million Conditional Loan Commitment for Michigan Project July 13, 2011 - 12:00am Addthis Washington, D.C. - U.S. Energy Secretary Steven Chu today announced the offer of a $730 million conditional loan commitment to Severstal Dearborn, LLC. The funding will support the modernization of existing facilities in Dearborn, Michigan, in addition to the design, manufacture, and construction of new facilities to produce the next generation of automotive advanced high strength steel (AHSS). The Severstal project has the potential to significantly increase the supply of AHSS in North America as demand continues to grow for fuel-efficient vehicles. An increased supply

78

DOE Offers $72 Million Conditional Loan Guarantee to SAGE Electrochromics |  

Broader source: Energy.gov (indexed) [DOE]

72 Million Conditional Loan Guarantee to SAGE 72 Million Conditional Loan Guarantee to SAGE Electrochromics DOE Offers $72 Million Conditional Loan Guarantee to SAGE Electrochromics March 5, 2010 - 12:00am Addthis Washington DC --- Energy Secretary Steven Chu today announced the Department of Energy has offered a conditional commitment for a $72 million loan guarantee to SAGE Electrochromics, based in Faribault, Minnesota. The deal will support the financing of the construction and operation of a 250,000 square foot, high volume manufacturing facility to produce SageGlass®, an energy-saving window technology for commercial use. This new facility will be built next to SAGE's existing production facility, enabling the company to expand production and lower costs. "This investment will help cut utility bills, reduce carbon pollution, and

79

Obama Administration Offers $535 Million Loan Guarantee to Solyndra, Inc. |  

Broader source: Energy.gov (indexed) [DOE]

35 Million Loan Guarantee to 35 Million Loan Guarantee to Solyndra, Inc. Obama Administration Offers $535 Million Loan Guarantee to Solyndra, Inc. March 20, 2009 - 12:00am Addthis Washington, DC - Energy Secretary Steven Chu today offered a $535 million loan guarantee for Solyndra, Inc. to support the company's construction of a commercial-scale manufacturing plant for its proprietary cylindrical solar photovoltaic panels. The company expects to create thousands of new jobs in the U.S. while deploying its solar panels across the U.S. and around the world. "This investment is part of President Obama's aggressive strategy to put Americans back to work and reduce our dependence on foreign oil by developing clean, renewable sources of energy," Secretary Chu said. "We can create millions of new, good paying jobs that can't be outsourced. Instead

80

Integrated Control of Solidification Microstructure and Melt Pool Dimensions In Additive Manufacturing Of Ti - 6Al - 4V.  

E-Print Network [OSTI]

??Additive manufacturing (AM) offers reduced material waste and energy usage, as well as an increase in precision. Direct metal AM is used not only for (more)

Gockel, Joy E.

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

LTCC multi-chip module LTCC multi-chip module A high density LTCC multi-chip module Electronic Packaging PDF format (150 kb) The Electronic Packaging technologies in the Thin Film, Vacuum, & Packaging Department are a resource for all aspects of microelectronic packaging. From design and layout to fabrication of prototype samples, the staff offers partners the opportunity for concurrent engineering and development of a variety of electronic packaging concepts. This includes assistance in selecting the most appropriate technology for manufacturing, analysis of performance characteristics and development of new and unique processes. Capabilities: Network Fabrication Low Temperature Co-Fired Ceramic (LTCC) Thick Film Thin Film Packaging and Assembly Chip Level Packaging MEMs Packaging

82

Digital Additive Manufacturing: From Rapid Prototyping to Rapid Manufacturing  

Science Journals Connector (OSTI)

The emergence of stereolithography in 1998 is a milestone for an entirely new class of layer-based manufacturing processes. This new manufacturing approach which allows direct digital manufacturing from CAD to a ...

K. K. B. Hon

2007-01-01T23:59:59.000Z

83

Solar Manufacturing Technology 2  

Broader source: Energy.gov [DOE]

The PV awards span the supply chain from novel methods to make silicon wafers, to advanced cell and metallization processes, to innovative module packaging and processing. The CSP award demonstrates manufacturability of an innovative CSP reflective-trough receiver. The first round of the SolarMat program was launched in September 2013 supporting five projects. The second round, announced on October 22, 2014, funds ten photovoltaics (PV) and concentrating solar power (CSP) projects that focus on driving down the cost of manufacturing and implementing efficiency-increasing technology in manufacturing processes.

84

Innovative Manufacturing Initiative Project Selections  

Office of Energy Efficiency and Renewable Energy (EERE)

The Department announced nearly $23 million for 12 projects across the country to advance technologies aimed at helping American manufacturers dramatically increase the energy efficiency of their manufacturing facilities, lower costs, and develop new manufacturing technologies.

85

Laser Additive Manufacturing of Metals  

Science Journals Connector (OSTI)

Laser Additive Manufacturing (LAM) is based on a repeating layer wise manufacturing process which uses a laser beam to ... ) geometries into simpler two-dimensional (2D) manufacturing steps [1, 2...]. Thus LAM of...

Claus Emmelmann; Jannis Kranz; Dirk Herzog; Eric Wycisk

2013-01-01T23:59:59.000Z

86

Metal Additive Manufacturing: A Review  

Science Journals Connector (OSTI)

This paper reviews the state-of-the-art of an important, rapidly emerging, manufacturing technology that is alternatively called additive manufacturing (AM), direct digital manufacturing, free form fabrication, o...

William E. Frazier

2014-06-01T23:59:59.000Z

87

Innovations in Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gov. Haslam Cuts Ribbon at Carbon Fiber Facility Gov. Haslam Cuts Ribbon at Carbon Fiber Facility Governor Bill Haslam along with David Danielson, EERE's Assistant Secretary, celebrate the opening of the Carbon Fiber Technology Facility. The 390-ft. long processing line is capable of custom unit operation configuration and has a capacity of up to 25 tons per year, allowing industry to validate conversion of their carbon fiber precursors at semi-production scale. Manufacturing Demonstration Facility Manufacturing Demonstration Facility Processing Technologies Advanced Materials Automation and Controls Brochure News Manufacturing Engineering Advanced Materials & Processes Materials for Aerospace On the cover, plus, read ORNL's feature articles on additive manufacturing and its momentum for aerospace applications.

88

Development of Additive Manufacturing Technology  

Science Journals Connector (OSTI)

Additive Manufacturing (AM) technology came about as a ... of different technology sectors. Like with many manufacturing technologies, improvements in computing power and reduction...

Dr. Ian Gibson; Dr. David W. Rosen

2010-01-01T23:59:59.000Z

89

Additive Manufacturing for Mass Customization  

Science Journals Connector (OSTI)

Additive manufacturing (AM) is a disruptive manufacturing technology that requires no tooling for production....additively build parts from numerous materials, including polymers, metals and ceramics. Within this...

Phil Reeves; Chris Tuck; Richard Hague

2011-01-01T23:59:59.000Z

90

Additive Manufacturing for Large Products.  

E-Print Network [OSTI]

?? This thesis researches the possibility and feasibility of applying additive manufacturing technology in the manufacturing of propellers. The thesis concerns the production at the (more)

Leirvg, Roar Nelissen

2013-01-01T23:59:59.000Z

91

Sandia National Laboratories: wind manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

manufacturing Wind Energy Manufacturing Lab Helps Engineers Improve Wind Power On November 15, 2011, in Energy, News, Partnership, Renewable Energy, Wind Energy Researchers at the...

92

Ten Hundred and One word challenge | U.S. DOE Office of Science...  

Office of Science (SC) Website

People's Choice Voting for the Ten Hundred and One Word Challenge Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News...

93

IIT Tenant Technology Services Telecommunications Offerings  

E-Print Network [OSTI]

IIT Tenant Technology Services Telecommunications Offerings Caller Identification is provided to a voice mailbox $5.50 Technical Support: For Telecommunications service questions or issues, contact

Heller, Barbara

94

Denton Municipal Electric- Standard Offer Rebate Program  

Broader source: Energy.gov [DOE]

Within the GreenSense program, Denton Municipal Electric's Standard Offer Program provides rebates to large commercial and industrial customers for lighting retrofits, HVAC upgrades and motor...

95

Fermilab | Newsroom | Press Releases | 2010 | Fermilab offers...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hall. "The Open House offers activities for the entire family," said Spencer Pasero, an education specialist at Fermilab. "Mr. Freeze and his cryogenics show are always a hit,...

96

Pend Oreille PUD - Manufactured Home Rebate Program | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Pend Oreille PUD - Manufactured Home Rebate Program Pend Oreille PUD - Manufactured Home Rebate Program Pend Oreille PUD - Manufactured Home Rebate Program < Back Eligibility Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Maximum Rebate $800 Program Info State District of Columbia Program Type Utility Rebate Program Rebate Amount Up to $800 Provider Pend Oreille PUD Pend Oreille PUD offers cash incentives up to $800 to residential customers who purchase a qualifying energy-efficient manufactured home. Homes must meet Energy Star certification to qualify. All program requirements must be met in order to receive rebate. See the program web site for more information. Other Information Manufactured home must achieve Energy Star certification

97

Idaho Power - Rebate Advantage for New Manufactured Homes | Department of  

Broader source: Energy.gov (indexed) [DOE]

Rebate Advantage for New Manufactured Homes Rebate Advantage for New Manufactured Homes Idaho Power - Rebate Advantage for New Manufactured Homes < Back Eligibility Construction Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Idaho Program Type Utility Rebate Program Rebate Amount $1000 rebate to the home buyer $200 bonus to the sales consultant Provider Idaho Power Company Idaho Power is offering a $1000 sales rebate to customers who purchase a new ENERGY STAR all-electric manufactured home and connect that home to an Idaho Power residential account. In addition, the sales consultant who sells the home will be eligible for a $200 sales bonus. ENERGY STAR manufactured homes are designed to be more energy efficient than standard

98

Renewable Energy Manufacturing Tax Credit (South Carolina) | Department of  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Tax Credit (South Carolina) Manufacturing Tax Credit (South Carolina) Renewable Energy Manufacturing Tax Credit (South Carolina) < Back Eligibility Industrial Savings Category Buying & Making Electricity Solar Heating & Cooling Commercial Heating & Cooling Heating Water Heating Wind Maximum Rebate $500,000 for any year and $5 million total for all years Program Info Start Date 01/01/2010 Expiration Date 12/31/2015 State South Carolina Program Type Industry Recruitment/Support Rebate Amount 10% South Carolina offers a ten percent income tax credit to the manufacturers of renewable energy operations* for tax years 2010 through 2015. In order to qualify, a business must: *manufacture renewable energy systems and components in South Carolina for solar, wind, geothermal, or other renewable energy uses

99

Electrolyzer Manufacturing Progress and Challenges  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electrolyzer Manufacturing Electrolyzer Manufacturing Progress and Challenges John Torrance, Director of Manufacturing DOE Manufacturing Workshop 8/12/11 Outline * Proton Commercialization Status: PEM Electrolysis * Current Manufacturing Limitations: Stack - Cost Breakdown - Approaches * Current Manufacturing Limitations: System - Cost Breakdown - Approaches * Potential Impact * Summary and Conclusions 2 3 * World leader in Proton Exchange Membrane (PEM) electrolyzer technology * Founded in 1996 - changed name from Proton Onsite in April 2011 to reflect product expansion. * ISO 9001:2008 registered * Over 1,500 systems operating in 62 different countries. Cell Stacks Complete Systems Turnkey Solutions Military Applications Proton Energy Proton Onsite Headquarters in Wallingford, CT Capabilities * Complete product development, manufacturing & testing

100

Advanced Manufacture of Reflectors  

Broader source: Energy.gov [DOE]

The Advance Manufacture of Reflectors fact sheet describes a SunShot Initiative project being conducted research team led by the University of Arizona, which is working to develop a novel method for shaping float glass. The technique developed by this research team can drastically reduce the time required for the shaping step. By enabling mass production of solar concentrating mirrors at high speed, this project should lead to improved performance and as much as a 40% reduction in manufacturing costs for reflectors made in very high volume.

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Advanced Drivetrain Manufacturing  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy (DOE) supports advanced manufacturing techniques that are leading to the "next-generation" of more reliable, affordable, and efficient wind turbine drivetrains. As turbines continue to increase in size, each and every component must also be scaled to meet the demands for renewable energy.

102

Innovations in Manufacturing  

Science Journals Connector (OSTI)

...competition from steam engines and water...Century ofthe Steam Engine is a classic...of the American System of Manufactures...general-purpose machine tools, interchangeable...spe-cialized machine tools, and were con-fined...note that if the system was con-fined...Nel-son provides an assessment of working conditions...

THOMAS WEISS

1983-05-20T23:59:59.000Z

103

President Obama Awards $2.3 Billion for New Clean-Tech Manufacturing Jobs |  

Broader source: Energy.gov (indexed) [DOE]

President Obama Awards $2.3 Billion for New Clean-Tech President Obama Awards $2.3 Billion for New Clean-Tech Manufacturing Jobs President Obama Awards $2.3 Billion for New Clean-Tech Manufacturing Jobs January 8, 2010 - 12:00am Addthis WASHINGTON - Today at the White House, President Obama announced the award of $2.3 billion in Recovery Act Advanced Energy Manufacturing Tax Credits for clean energy manufacturing projects across the United States. One hundred eighty three projects in 43 states will create tens of thousands of high quality clean energy jobs and the domestic manufacturing of advanced clean energy technologies including solar, wind and efficiency and energy management technologies. As part of the Recovery Act, these tax credits are focused on putting Americans back to work by building a robust domestic manufacturing capacity

104

President Obama Awards $2.3 Billion for New Clean-Tech Manufacturing Jobs |  

Broader source: Energy.gov (indexed) [DOE]

President Obama Awards $2.3 Billion for New Clean-Tech President Obama Awards $2.3 Billion for New Clean-Tech Manufacturing Jobs President Obama Awards $2.3 Billion for New Clean-Tech Manufacturing Jobs January 8, 2010 - 12:00am Addthis WASHINGTON - Today at the White House, President Obama announced the award of $2.3 billion in Recovery Act Advanced Energy Manufacturing Tax Credits for clean energy manufacturing projects across the United States. One hundred eighty three projects in 43 states will create tens of thousands of high quality clean energy jobs and the domestic manufacturing of advanced clean energy technologies including solar, wind and efficiency and energy management technologies. As part of the Recovery Act, these tax credits are focused on putting Americans back to work by building a robust domestic manufacturing capacity

105

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Information Integration & Infrastructure Manufacturing Information Integration & Infrastructure PDF format (47 kb) The Information Infrastructure Team in the Computer Applications for Manufacturing organization can provide programming and analysis support for information applications for manufacturing. The Team works closely with customers to help them define their requirements. The Team's experience and expertise can help your manufacturing information needs. Capabilities Provide computer hardware and software standards that directly support the seamless manufacturing initiative. Develop graphical user interfaces (GUI) for applications using the proprietary Windows environment or an open system design using Web servers and client browsers. Provide computer hardware support, including all personal computer

106

Transformational Manufacturing | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transformational Manufacturing Transformational Manufacturing Argonne's new Advanced Battery Materials Synthesis and Manufacturing R&D Program focuses on scalable process R&D to produce advanced battery materials in sufficient quantity for industrial testing. The U.S. manufacturing industry consumes more than 30 quadrillion Btu of energy per year, directly employs about 12 million people and generates another 7 million jobs in related businesses. Argonne is working with industry to develop innovative and transformational technology to improve the efficiency and competitiveness of domestic manufacturing while reducing its carbon footprint. The lab's efforts concentrate on sustainable manufacturing, applied nanotechnology and distributed energy, with an emphasis on transitioning science discoveries to the market.

107

MDF | Manufacturing Demonstration Facility | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

BTRIC CNMS CSMB CFTF HFIR MDF Working with MDF NTRC OLCF SNS Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration Facility SHARE As the nation's premier research laboratory, ORNL is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. Manufacturing industries engage ORNL's expertise in materials synthesis, characterization, and process technology to reduce technical risk and validate investment for innovations targeting products of the future. DOE's Manufacturing Demonstration Facility, established at ORNL, helps industry adopt new manufacturing technologies to reduce life-cycle energy

108

Manufacturing News | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Manufacturing News Manufacturing News RSS January 15, 2014 FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute The Obama Administration announces the selection of North Carolina State University to lead a public-private manufacturing innovation institute for next generation power electronics. November 22, 2013 In Cleveland, Alcoa and ArcelorMittal Recognized for Leadership in Energy Efficiency As Part of Obama Administration's Better Plants Program, U.S. Manufacturers Cut Energy Waste and Save Money October 21, 2013 FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency Underscoring President Obama's Climate Action Plan to cut harmful emissions and double energy efficiency, the Energy Department is taking

109

MDF | Manufacturing Demonstration Facility | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Working with MDF Working with MDF Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration Facility SHARE As the nation's premier research laboratory, ORNL is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. Manufacturing industries engage ORNL's expertise in materials synthesis, characterization, and process technology to reduce technical risk and validate investment for innovations targeting products of the future. DOE's Manufacturing Demonstration Facility, established at ORNL, helps industry adopt new manufacturing technologies to reduce life-cycle energy

110

Manufacturing Initiative | Clean Energy | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research Areas Research Areas Buildings Climate & Environment Manufacturing Fossil Energy Sensors & Measurement Sustainable Electricity Systems Biology Transportation Clean Energy Home | Science & Discovery | Clean Energy | Research Areas | Manufacturing SHARE Manufacturing Initiative Titanium robotic hand holding sphere fabricated using additive manufacturing Oak Ridge National Laboratory is supporting the DOE's Office of Energy Efficiency and Renewable Energy (EERE) Clean Energy Manufacturing Initiative focusing on American competitiveness in clean energy manufacturing. The DOE Initiative has two primary objectives-increase US competitiveness in the production of clean energy products (e.g., wind turbines, solar panels, energy efficient appliances, light bulbs, vehicles and automotive

111

Recordkeeping for Offshore Course Offerings Guideline  

E-Print Network [OSTI]

Guideline Recordkeeping for Offshore Course Offerings Guideline Policy Supported: Recordkeeping and operation of Offshore Courses. Contact Officer: Manager, Records Management Phone: 9360 2162 Printed copies outlines responsibilities for managing records in all formats associated with Offshore Courses

112

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network [OSTI]

that convert hydrogen into electric energy, (2) hydrogen storage systems, and (3) large-scale hydrogen and prioritize topics for public-private R&D on manufacturing hydrogen storage system components. ScopeManufacturing for the Hydrogen Economy Manufacturing Research & Development of Onboard Hydrogen

113

Gas Turbine Manufacturers Perspective  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Viability and Experience of IGCC From a Viability and Experience of IGCC From a Gas Turbine Manufacturers Perspective ASME - IGCC ASME - IGCC Turbo Turbo Expo Expo June 2001 June 2001 GE Power Systems g Klaus Brun, Ph.D. - Manager Process Power Plant Product & Market Development Robert M. Jones - Project Development Manager Process Power Plants Power Systems Power Systems General Electric Company General Electric Company ABSTRACT GE Power Systems g Economic Viability and Experience of IGCC From a Gas Turbine Manufacturers Perspective High natural gas fuel gas prices combined with new technology developments have made IGCC a competitive option when compared to conventional combined cycle or coal steam turbine cycles. Although the initial investment costs for an IGCC plant are still comparatively high, the low

114

Fuel Oil Use in Manufacturing  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

of fuel oil relative to other fuels is that manufacturers must maintain large storage tanks. This can prove to be an added expense beyond the price of the fuel. Manufacturers...

115

Climate VISION: Private Sector Initiatives: Chemical Manufacturing:  

Office of Scientific and Technical Information (OSTI)

Resources & Links Resources & Links Software Tools Chemical Industry of the Future Tools & Publications The Industrial Technologies Program offers a wide array of publications, videos, software, and other information products for improving energy efficiency in the chemical industry. DOE BestPractices Software Tools DOE BestPractices offers a range of software tools and databases that help manufacturers assess their plant's steam, compressed air, motor, and process heating systems. DOE Plant Energy Profiler Industry experience has shown that many plant utility personnel do not have an adequate understanding of their energy cost structure and where the major focus should be for any energy savings program. This tool will address this need and enable an engineer assigned to a plant utility to

116

Ten Hundred and One word challenge | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

People's Choice Voting for the Ten Hundred People's Choice Voting for the Ten Hundred and One Word Challenge Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications Contact BES Home 07.10.13 People's Choice Voting for the Ten Hundred and One Word Challenge Print Text Size: A A A Subscribe FeedbackShare Page The Ten Hundred and One Word Challenge External link invited the 46 Energy Frontier Research Centers to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE: energy. The Challenge was inspired by Up Goer Five External link , a comic by

117

Midwest Has Potential to Store Hundreds of Years of CO2 Emissions |  

Broader source: Energy.gov (indexed) [DOE]

Midwest Has Potential to Store Hundreds of Years of CO2 Emissions Midwest Has Potential to Store Hundreds of Years of CO2 Emissions Midwest Has Potential to Store Hundreds of Years of CO2 Emissions November 16, 2011 - 12:00pm Addthis Washington, DC - Geologic capacity exists to permanently store hundreds of years of regional carbon dioxide (CO2) emissions in nine states stretching from Indiana to New Jersey, according to injection field tests conducted by the Midwest Regional Carbon Sequestration Partnership (MRCSP). MRCSP's just-released Phase II final report indicates the region has likely total storage of 245.5 billion metric tons of CO2, mostly in deep saline rock formations, a large capacity compared to present day emissions. While distributed sources such as agriculture, transportation, and home heating account for a significant amount of CO2 emissions in the MRCSP

118

Rapid manufacturing: impact on supply chain methodologies and practice  

Science Journals Connector (OSTI)

This paper demonstrates the use of Rapid Manufacturing (RM) as the enabling technology for flexible manufacturing in a number of industrial sectors. This paper discusses the evolution of Rapid Prototyping (RP) to RM and the current issues that require further research for the successful integration of this technology within manufacturing companies. The use of RM will have particular impact on supply chain management paradigms such as lean and agile and has particular strategic fit with mass customisation. The effect of RM will have on these paradigms is discussed and confirmed with example cases from automotive production, motor sport and medical devices industries. In conclusion, RM has already been shown in the three cases to offer benefits, particularly where fast reconfiguration of the manufacturing process is required and with the production of customised components.

Christopher Tuck; Richard Hague; Neil Burns

2007-01-01T23:59:59.000Z

119

Leveraging Manufacturing for a Sustainable Future  

E-Print Network [OSTI]

2010): Sustainable Manufacturing Greening Processes,processes and systems) can play in creating a sustainablesustainable manufacturing as the creation of manufacturing products that use materials and processes

Dornfeld, David

2011-01-01T23:59:59.000Z

120

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

D. , Sustainable Manufacturing - Greening Processes,Avoid) Increase process efficiency Most sustainable (Improvesustainable manufacturing. 2 They highlighted research needs in four categories: i) manufacturing processes and

Linke, Barbara; Huang, Yu-Chu; Dornfeld, David

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Sustainable Manufacturing Greening Processes, Systems and Products  

E-Print Network [OSTI]

mittels Sustainable Manufacturing - Greening Processes,Sustainable for manufacturing Manufacturing Cambridge, accessed processes,processes due to energy awareness and environmental consciousness create many opportunities for sustainable

Dornfeld, David

2010-01-01T23:59:59.000Z

122

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

D. , Sustainable Manufacturing Greening Processes, Systemsorimpact low Most sustainable Increaseprocess efficiencysustainable manufacturing [1]. They highlighted research needs in four categories: i) manufacturing processes and

Linke, Barbara; Dornfeld, David; Huang, Yu-Chu

2011-01-01T23:59:59.000Z

123

Climate VISION: Private Sector Initiatives: Automobile Manufacturers...  

Office of Scientific and Technical Information (OSTI)

Industry Associations Alliance of Automobile Manufacturers The Alliance of Automobile Manufacturers, Inc. is a trade association composed of 10 car and light truck manufacturers...

124

Precision and Energy Usage for Additive Manufacturing  

E-Print Network [OSTI]

Sustainability of additive manufacturing: measuring theCommittee F42 on Additive Manufacturing Technologies," TheASTM Committee F42 on Additive Manufacturing Technologies. -

Clemon, Lee; Sudradjat, Anton; Jaquez, Maribel; Krishna, Aditya; Rammah, Marwan; Dornfeld, David

2013-01-01T23:59:59.000Z

125

Energy Use in Manufacturing ? 1998 to 2002  

U.S. Energy Information Administration (EIA) Indexed Site

Use in Manufacturing - 1998 to 2002 Energy Use in Manufacturing provides information related to energy consumption changes within the U.S. manufacturing sector between 1998 and...

126

Attachment 2: Solicitation for Offers with New and Revised Green...  

Office of Environmental Management (EM)

2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Solicitation for Offers Paragraphs with...

127

Department of Energy Offers $245 Million Conditional Loan Guarantee to Red  

Broader source: Energy.gov (indexed) [DOE]

Offers $245 Million Conditional Loan Guarantee Offers $245 Million Conditional Loan Guarantee to Red River Environmental Products Department of Energy Offers $245 Million Conditional Loan Guarantee to Red River Environmental Products December 9, 2009 - 12:00am Addthis Washington, DC - Energy Secretary Steven Chu today announced the offer of a $245 million conditional loan guarantee to Red River Environmental Products, LLC to build an activated carbon (AC) manufacturing facility near Coushatta, Red River Parish, Louisiana. The company expects to create 500 jobs during construction and 70 jobs once the plant is fully operational. Activated carbon is the leading technology for reducing mercury emissions from coal-fired power plants and has been adopted by virtually all coal-fired boilers required to reduce mercury emissions. AC can reduce a

128

Manufacturing Science and Technology: Organizations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machining Operations Machining Operations Machining Services Electronic Fabrication Manufacturing Process Science & Technology Thin Film, Vacuum, & Packaging Organic Materials Ceramic & Glass Meso Manufacturing & Systems Development Visiting Us AMTTP Center Organizational chart Organizations Our Business areas Manufacturing Science and Technology David Plummer, Director Manufacturing Enterprise Joe M. Harris, Senior Manager Machining Operations Mathew Donnelly, Manager Machining Services Daryl Reckaway, Acting Manager Electronic Fabrication Phillip L. Gallegos, Manager Manufacturing Process Science and Technology Mark F. Smith, Senior Manager Thin Film, Vacuum, and Packaging Mark F. Smith, Acting Manager Organic Materials Mike Kelly, Manager Ceramic and Glass Alex Roesler, Manager

129

Advanced Manufacturing Office: Motor Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Motor Systems to Motor Systems to someone by E-mail Share Advanced Manufacturing Office: Motor Systems on Facebook Tweet about Advanced Manufacturing Office: Motor Systems on Twitter Bookmark Advanced Manufacturing Office: Motor Systems on Google Bookmark Advanced Manufacturing Office: Motor Systems on Delicious Rank Advanced Manufacturing Office: Motor Systems on Digg Find More places to share Advanced Manufacturing Office: Motor Systems on AddThis.com... Quick Links Energy Resource Center Technical Publications by Energy System Energy-Efficient Technologies Incentives & Resources by Zip Code Better Plants Superior Energy Performance Contacts Motor Systems Photo of Man Checking Motor Performance Motor-driven equipment accounts for 54% of manufacturing electricity use. Dramatic energy and cost savings can be achieved in motor systems by

130

Revolutionizing Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Revolutionizing Manufacturing Revolutionizing Manufacturing Revolutionizing Manufacturing Addthis Saving Energy and Resources 1 of 4 Saving Energy and Resources Thanks to additive manufacturing technology, Oak Ridge National Laboratory was able to fabricate a robotic hand with less energy use and material waste. The novel, lightweight, low-cost fluid powered hand was selected for a 2012 R&D 100 award. | Photo courtesy of Oak Ridge National Laboratory. Partnering with Industry 2 of 4 Partnering with Industry The Energy Department's Manufacturing Demonstration Facility at Oak Ridge National Laboratory includes an array of state-of-the-art additive manufacturing capabilities, allowing researchers and industry to develop innovative manufacturing solutions. | Photo courtesy of Oak Ridge National

131

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Manufacturing Manufacturing Sector Overview 1991-1994 Energy Information Administration/Manufacturing Consumption of Energy 1994 xiii Why Do We Investigate Energy Use in the Manufacturing Sector? What Data Do EIA Use To Investigate Energy Use in the Manufacturing Sector? In 1991, output in the manufactur- ing sector fell as the country went into a recession. After 1991, however, output increased as the country slowly came out of the recession. Between 1991 and 1994, manufacturers, especially manu- facturers of durable goods such as steel and glass, experienced strong growth. The industrial production index for durable goods during the period increased by 21 percent. Real gross domestic product for durable goods increased a corre- sponding 16 percent. The growth of nondurables was not as strong-- the production index increased by only 9 percent during this time period.

132

Market Offering Strategies for Hydroelectric Generators  

Science Journals Connector (OSTI)

This paper considers the problem of offering electricity produced by a series of hydroelectric reservoirs to a pool-type central market. The market model is a simplified version of the New Zealand wholesale electricity market, with prices modelled by ... Keywords: Dynamic programming: finite state, markov, Natural resources: energy, water resources, Probability: markov processes

G. Pritchard; G. Zakeri

2003-07-01T23:59:59.000Z

133

Semester Planned to be Offered for  

E-Print Network [OSTI]

Sciences MEEM3230 (C) MEEM4220 3 Spring Internal Combustion Engines I MEEM3210 MEEM4240 3 Fall Combustion offered below. MEEM5240 3 Spring Comp Fluid Dynamics for Engg MEEM5250 3 Fall Internal Combustion Engines Engineering MA3710/3720 MEEM4655 3 Spring

Endres. William J.

134

Faculty Position in Mechanical Engineering Additive Manufacturing  

E-Print Network [OSTI]

Faculty Position in Mechanical Engineering Additive Manufacturing University of Kansas of additive manufacturing. Exceptional candidates with outstanding qualifications could be considered using additive manufacturing in applications such as, but not limited to the net shape manufacture of

135

The Fourth Annual DOE Solid-State Lighting Manufacturing R&D Workshop  

Broader source: Energy.gov [DOE]

Two hundred lighting industry leaders from across the country, representing every link in the supply chainfrom chip makers, to luminaire manufacturers, to material and equipment suppliers, to packagers, to luminaire testers, to the makers of testing equipmentgathered in San Jose, CA, June 1314, 2012, to share insights, ideas, and updates at the fourth annual Solid-State Lighting (SSL) Manufacturing R&D Workshop, hosted by DOE. The workshop is a key component of an initiative launched by DOE in 2009 to enhance the quality and lower the cost of SSL products through improvements in manufacturing equipment and processes, and to foster a significant manufacturing role in the U.S. This year in San Jose, attendees explored a wide range of related topics and focused on reexamining and updating the DOE Manufacturing R&D Roadmap.

136

Seminar Title: Additive Manufacturing Advanced Manufacturing of Polymer and Composite Components  

E-Print Network [OSTI]

Seminar Title: Additive Manufacturing ­ Advanced Manufacturing of Polymer and Composite Components Functionally Integrated Composite Structures, Augsburg, Germany ME Faculty Candidate Abstract: Additive Manufacturing ­ Advanced Manufacturing of Polymer and Composite Components Additive manufacturing technologies

Wisconsin at Madison, University of

137

Plumbing Manufacturer's Institute Ex Parte Communication Regarding...  

Broader source: Energy.gov (indexed) [DOE]

Plumbing Manufacturer's Institute Ex Parte Communication Regarding Showerheads Plumbing Manufacturer's Institute Ex Parte Communication Regarding Showerheads Letter to Department...

138

Advanced Technology Vehicles Manufacturing Incentive Program...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program A fact sheet detailling the advanced technology vehicles...

139

Infrared imaging: A versatile NDT method for manufacturing  

SciTech Connect (OSTI)

The non-contact, non-invasive, highly adaptable nature of infrared technology offers many advantages over traditional non-destructive testing methods such as x-ray and ultrasound. Recent performance improvements accompanied by cost reductions are enabling broader implementation across a wide variety of industries. Most promising for future growth are application specific configurations packaged as integrated modules. Among the many industries that benefit from infrared technology, manufacturing has experienced the greatest gain. Environments including both continuous and batch manufacturing involve many critical thermal processes. Through the use of infrared imaging equipment, these processes can be easily monitored and optimized to ensure product quality and process efficiency.

West, L.M. [FLIR Systems, Inc., Portland, OR (United States)

1995-12-31T23:59:59.000Z

140

Manufacturing consumption of energy 1994  

SciTech Connect (OSTI)

This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

NONE

1997-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

New Carbon Storage Atlas Shows Hundreds of Years of CO2 Storage Potential |  

Broader source: Energy.gov (indexed) [DOE]

Carbon Storage Atlas Shows Hundreds of Years of CO2 Storage Carbon Storage Atlas Shows Hundreds of Years of CO2 Storage Potential New Carbon Storage Atlas Shows Hundreds of Years of CO2 Storage Potential December 21, 2012 - 9:58am Addthis Atlas IV was created by the National Energy Technology Laboratory (NETL), and includes input from the more than 400 organizations in 43 states and four Canadian provinces that make up the Department’s seven Regional Carbon Sequestration Partnerships (as shown above). See this map here. Atlas IV was created by the National Energy Technology Laboratory (NETL), and includes input from the more than 400 organizations in 43 states and four Canadian provinces that make up the Department's seven Regional Carbon Sequestration Partnerships (as shown above). See this map here.

142

Multiple Rankine topping cycles offer high efficiency  

SciTech Connect (OSTI)

The efficiency of a Rankine cycle is primarily determined by the temperatures of heat addition and heat rejection. However, no working fluid has been identified that will operate in a Rankine cycle over an extremely wide temperature range. Multiple Rankine topping cycles offer a technique for achieving high thermal efficiencies in power plants by allowing the use of several working fluids to span larger temperature ranges.

McWhirter, J.D. [Idaho State Univ., Pocatello, ID (United States)

1997-10-01T23:59:59.000Z

143

Manufacturing consumption of energy 1991  

SciTech Connect (OSTI)

This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

Not Available

1994-12-01T23:59:59.000Z

144

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machining Machining PDF format (236 kb) MS&T's machining group consists of two departments: Manufacturing Processing, and Manufacturing Processes and Services. The two departments team to build, procure, and assemble unique prototype and production hardware with diverse quality requirements. The in-house capability can manufacture hardware ranging from microscopic to proportions measured in feet and tons. The group's outside contacts and resources are almost boundless. This team's expertise includes: precision machining, welding, fabrication and assembly, aircraft quality sheet metal construction, and explosives machining and assembly. The department can manage a variety of activities: design modifications, in-house fabrication, outside shop selection and surveillance and manufacturing records management.

145

High Pressure Hydrogen Tank Manufacturing  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

146

ITP Nanomanufacturing: Nanomanufacturing Portfolio: Manufacturing...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications Sustainable Nanomaterials Workshop Advanced Manufacturing Office, U.S. Department of Energy Nanocomposite Materials for Lithium-Ion Batteries...

147

Electrolyzer Manufacturing Progress and Challenges  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

148

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Detailed Tables 28 Energy Information AdministrationManufacturing Consumption of Energy 1994 1. In previous MECS, the term "primary energy" was used to denote the "first use" of...

149

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

1 Energy Information AdministrationManufacturing Consumption of Energy 1994 Introduction The market for natural gas has been changing for quite some time. As part of natural gas...

150

Facts controllers and HVDC enhance power transmission (A manufacturer`s perspective)  

SciTech Connect (OSTI)

Various types of FACTS as well as HVDC have been available for some time. New ones have been developed recently. Their respective benefits are well proven and have been made known. System studies have to be done to make full use of FACTS and HVDC problem solving capabilities. Siemens is offering digital models for correct representation of several FACTS devices and HVDC in widely used time-based simulation study programs. The manufacturers are doing their homework. It is up to the utility industry to make use of it now!

Juette, G. [Siemens Energy & Automation, Atlanta, GA (United States); Renz, K. [Siemens AG, Erlangen (Germany)

1995-12-31T23:59:59.000Z

151

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network [OSTI]

Manufacturing for the Hydrogen Economy Manufacturing Research & Development of PEM Fuel Cell of the hydrogen and fuel cell technologies needed to move the United States toward a future hydrogen economy of a hydrogen energy economy, moving from today's laboratory-scale fabrication technologies to high

152

On Sandstrm's inferences from his tank experiments a hundred years later  

E-Print Network [OSTI]

1 On Sandström's inferences from his tank experiments ­ a hundred years later Till Kuhlbrodt;2 Abstract In 1908, J.W. Sandström conducted several tank experiments to illustrate oceanic circulations. Such overturning circulations are found in the atmos- phere and in the ocean, and they have been treated in tank

Kuhlbrodt, Till

153

One Hundred Years of Oil Income and the Iranian Economy: A Curse or a Blessing  

E-Print Network [OSTI]

This paper examines the impact of oil revenues on the Iranian economy over the past hundred years, spanning the period 1908-2010. It is shown that although oil has been produced in Iran over a very long period, its importance in the Iranian economy...

Mohaddes, Kamiar; Pesaran, M. Hashem

2012-01-17T23:59:59.000Z

154

PetaScale Calculations of the Electronic Structures of Nanostructures with Hundreds of Thousands of Processors  

E-Print Network [OSTI]

PetaScale Calculations of the Electronic Structures of Nanostructures with Hundreds of Thousands in the material science category. The DFT can be used to calculate the electronic structure, the charge density selfconsistent calculation without atomic relaxation). But there are many problems which either requires much

155

Demand Activated Manufacturing Architecture  

SciTech Connect (OSTI)

Honeywell Federal Manufacturing & Technologies (FM&T) engineers John Zimmerman and Tom Bender directed separate projects within this CRADA. This Project Accomplishments Summary contains their reports independently. Zimmerman: In 1998 Honeywell FM&T partnered with the Demand Activated Manufacturing Architecture (DAMA) Cooperative Business Management Program to pilot the Supply Chain Integration Planning Prototype (SCIP). At the time, FM&T was developing an enterprise-wide supply chain management prototype called the Integrated Programmatic Scheduling System (IPSS) to improve the DOE's Nuclear Weapons Complex (NWC) supply chain. In the CRADA partnership, FM&T provided the IPSS technical and business infrastructure as a test bed for SCIP technology, and this would provide FM&T the opportunity to evaluate SCIP as the central schedule engine and decision support tool for IPSS. FM&T agreed to do the bulk of the work for piloting SCIP. In support of that aim, DAMA needed specific DOE Defense Programs opportunities to prove the value of its supply chain architecture and tools. In this partnership, FM&T teamed with Sandia National Labs (SNL), Division 6534, the other DAMA partner and developer of SCIP. FM&T tested SCIP in 1998 and 1999. Testing ended in 1999 when DAMA CRADA funding for FM&T ceased. Before entering the partnership, FM&T discovered that the DAMA SCIP technology had an array of applications in strategic, tactical, and operational planning and scheduling. At the time, FM&T planned to improve its supply chain performance by modernizing the NWC-wide planning and scheduling business processes and tools. The modernization took the form of a distributed client-server planning and scheduling system (IPSS) for planners and schedulers to use throughout the NWC on desktops through an off-the-shelf WEB browser. The planning and scheduling process within the NWC then, and today, is a labor-intensive paper-based method that plans and schedules more than 8,000 shipped parts per month based on more than 50 manually-created document types. The fact that DAMA and FM&T desired to move from paper-based manual architectures to digitally based computer architectures gave further incentive for the partnership to grow. FM&T's greatest strength was its knowledge of NWC-wide scheduling and planning with its role as the NWC leader in manufacturing logistics. DAMA's asset was its new knowledge gained in the research and development of advanced architectures and tools for supply chain management in the textiles industry. These complimentary strengths allowed the two parties to provide both the context and the tools for the pilot. Bender: Honeywell FM&T participated in a four-site supply chain project, also referred to as an Inter-Enterprise Pipeline Evaluation. The MSAD project was selected because it involves four NWC sites: FM&T, Pantex, Los Alamos National Laboratory (LANL), and Lawrence Livermore National Laboratory (LLNL). FM&T had previously participated with Los Alamos National Laboratory in FY98 to model a two-site supply chain project, between FM&T and LANL. Evaluation of a Supply Chain Methodology is a subset of the DAMA project for the AMTEX consortium. LANL organization TSA-7, Enterprise Modeling and Simulation, has been involved in AMTEX and DAMA through development of process models and simulations for LANL, the NWC, and others. The FY 1998 and this FY 1999 projects directly involved collaboration between Honeywell and the Enterprise Modeling and Simulation (TSA-7) and Detonation Science and Technology (DX1) organizations at LANL.

Bender, T.R.; Zimmerman, J.J.

2001-02-07T23:59:59.000Z

156

Engineers' Council Offers Canons of Ethics  

Science Journals Connector (OSTI)

Engineers' Council Offers Canons of Ethics ... A SET of ethics, entitled "Canons of Ethics for Engineers," is presented in the fifteenth annual report of the Engineers' Council for Professional Development as representing the final recommendations of the council's Committee on Principles of Engineering Ethics. ... This work was begun in 1940 under a committee organized by the American Engineering Council, now dissolved, and resulted in the formulation of canons of ethics consisting of 31 items which were submitted to the constituent bodies for consideration in 1942. ...

1948-08-02T23:59:59.000Z

157

Petrick Technology Trends Of Manufacturing  

E-Print Network [OSTI]

#12;323 Petrick Technology Trends chapter 9 The Future Of Manufacturing Irene Petrick Technology Trends This chapter is a story about the future of manufacturing based on three predictions: � that firms sophisticated modeling and simulation of both new products and production processes; � that additive

158

Design for manufacturability Design verification  

E-Print Network [OSTI]

ITRS Design #12;Design · Design for manufacturability · Design verification #12;Design for Manufacturability · Architecture challenges · Logic and circuit challenges · Layout and physical design challenges · Expected to be the source of multiple DFM challenges · Invest in variability reduction or design

Patel, Chintan

159

Manufacturing Blog | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Manufacturing Blog Manufacturing Blog RSS January 15, 2014 Next-Generation Power Electronics: Reducing Energy Waste and Powering the Future From unleashing more powerful and energy-efficient laptops, cell phones and motors, to shrinking utility-scale inverters from 8,000 pound substations to the size of a suitcase, wide bandgap semiconductors could be one of the keys to our clean energy future. January 6, 2014 Manufacturing Spotlight: Boosting American Competitiveness Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient. November 15, 2013 Secretary Moniz Joins President Obama in Visit to Cleveland High-Strength Steel Factory Secretary Moniz and President Obama toured a high-strength steel plant in

160

Advanced Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Advanced Manufacturing Advanced Manufacturing Advanced Manufacturing EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency — promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which we work, shop, and lead our everyday lives. EERE leads a robust network of researchers and other partners to continually develop cost-effective energy-saving solutions that help make our country run better through increased efficiency - promoting better plants, manufacturing processes, and products; more efficient new homes and improved older homes; and other solutions to enhance the buildings in which

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Manufacturing Fuel Cell Manhattan Project  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to to DOE Fuel Cell Manufacturing Workshop 2011 John Christensen, PE NREL Consultant DOE Fuel Cell Market Transformation Support August 11, 2011 Manufacturing Fuel Cell Manhattan Project √ Identify manufacturing cost drivers to achieve affordability √ Identify best practices in fuel cell manufacturing technology √ Identify manufacturing technology gaps √ Identify FC projects to address these gaps MFCMP Objectives Completed Final Report due out Nov 2010 B2PCOE Montana Tech SME's Industry Academia Government FC Consortiums Power ranges * <0.5 kW (man portable / man wearable) * 0.5 kW< Power range < 10 kW (mobile power) Fuels: Hydrogen and reformed hydrocarbons *Packaged Fuels < 0.5 kW * Near term solution * Move through the supply chain like batteries

162

Manufacturing Data | Data.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Data Data Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing Manufacturing Data These Federal datasets contain a wealth of information for manufacturing - either from information in a single dataset or by combining data from more than one place. This site will be enhanced with the addition of new datasets, and new apps using these datasets, as they are developed. Search Terms Category -Any- Geospatial Items per page 25 50 100 Apply Name Downloads Rating TradeStats Express TradeStats Express provides statistics on U.S. merchandise trade at the national and state levels. Data can also be displayed in maps, graphs, tables, or as exports, imports, and trade balances.... Data Extraction

163

Tax Credit for Manufacturers of Small Wind Turbines | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Tax Credit for Manufacturers of Small Wind Turbines Tax Credit for Manufacturers of Small Wind Turbines Tax Credit for Manufacturers of Small Wind Turbines < Back Eligibility Industrial Savings Category Wind Buying & Making Electricity Program Info Start Date 01/01/03 State Oklahoma Program Type Industry Recruitment/Support Rebate Amount Based on square footage of rotor swept area: 25.00/ft^2 for 2005 through 2012 Provider Oklahoma Tax Commission '''''Note: After a 2 year moratorium on all state tax credits, this credit may be claimed for tax year 2012 and subsequent tax years, for small wind turbines manufactured on or after July 1, 2012.''''' Oklahoma offers an income tax credit to the manufacturers of small wind turbines for tax years 2003 through 2012. Oklahoma manufacturers of wind turbines with a rated capacity of between 1 kilowatt (kW) and 50 kW are

164

Climate VISION: Private Sector Initiatives: Automobile Manufacturers:  

Office of Scientific and Technical Information (OSTI)

Resources & Links Resources & Links Software Tools DOE BestPractices Software Tools DOE BestPractices offers a range of software tools and databases that help manufacturers assess their plant's steam, compressed air, motor, and process heating systems. DOE Plant Energy Profiler Industry experience has shown that many plant utility personnel do not have an adequate understanding of their energy cost structure and where the major focus should be for any energy savings program. This tool will address this need and enable an engineer assigned to a plant utility to better understand (a) the cost of all energy sources supplied to the plant, (b) how much energy each individual utility service or energy-consuming equipment consumes, and, (c) where opportunities to realize savings exist.

165

Out of Bounds Additive Manufacturing Christopher  

E-Print Network [OSTI]

#12;Out of Bounds Additive Manufacturing Christopher Holshouser, Clint Newell, and Sid Palas, Tenn. The Big Area Additive Manufacturing system has the potential to manufacture parts completely) are working on an additive manufacturing (AM) system (Big Area Additive Manufacturing, or BAAM) capable

Pennycook, Steve

166

Better Buildings Neighborhood Program: Program Offers New Spin on  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Program Offers Program Offers New Spin on Traditional Marketing to someone by E-mail Share Better Buildings Neighborhood Program: Program Offers New Spin on Traditional Marketing on Facebook Tweet about Better Buildings Neighborhood Program: Program Offers New Spin on Traditional Marketing on Twitter Bookmark Better Buildings Neighborhood Program: Program Offers New Spin on Traditional Marketing on Google Bookmark Better Buildings Neighborhood Program: Program Offers New Spin on Traditional Marketing on Delicious Rank Better Buildings Neighborhood Program: Program Offers New Spin on Traditional Marketing on Digg Find More places to share Better Buildings Neighborhood Program: Program Offers New Spin on Traditional Marketing on AddThis.com... Better Buildings Residential Network

167

Fact #857 January 26, 2015 Number of Partner Workplaces Offering...  

Energy Savers [EERE]

7 January 26, 2015 Number of Partner Workplaces Offering Electric Vehicle Charging More Than Tripled Since 2011 Fact 857 January 26, 2015 Number of Partner Workplaces Offering...

168

USDA Offers Renewable Energy Feasibility Studies for Rural Businesses...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

USDA Offers Renewable Energy Feasibility Studies for Rural Businesses USDA Offers Renewable Energy Feasibility Studies for Rural Businesses September 22, 2010 - 10:43am Addthis The...

169

Sandia National Laboratories: Sandia Offers Approach to Help...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ClimateECAbout ECFacilitiesDETLSandia Offers Approach to Help Utilities Understand Effects of PV Variability on the Grid Sandia Offers Approach to Help Utilities Understand Effects...

170

Energy Department Offers Conditional Commitment to Support Nevada...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Offers Conditional Commitment to Support Nevada Geothermal Development with Recovery Act Funds Energy Department Offers Conditional Commitment to Support Nevada Geothermal...

171

Department Of Energy Offers $60 Million to Spur Industry Engagement...  

Office of Environmental Management (EM)

Of Energy Offers 60 Million to Spur Industry Engagement in Global Nuclear Energy Partnership Department Of Energy Offers 60 Million to Spur Industry Engagement in Global Nuclear...

172

Beryllium Manufacturing Processes  

SciTech Connect (OSTI)

This report is one of a number of reports that will be combined into a handbook on beryllium. Each report covers a specific topic. To-date, the following reports have been published: (1) Consolidation and Grades of Beryllium; (2) Mechanical Properties of Beryllium and the Factors Affecting these Properties; (3) Corrosion and Corrosion Protection of Beryllium; (4) Joining of Beryllium; (5) Atomic, Crystal, Elastic, Thermal, Nuclear, and other Properties of Beryllium; and (6) Beryllium Coating (Deposition) Processes and the Influence of Processing Parameters on Properties and Microstructure. The conventional method of using ingot-cast material is unsuitable for manufacturing a beryllium product. Beryllium is a highly reactive metal with a high melting point, making it susceptible to react with mold-wall materials forming beryllium compounds (BeO, etc.) that become entrapped in the solidified metal. In addition, the grain size is excessively large, being 50 to 100 {micro}m in diameter, while grain sizes of 15 {micro}m or less are required to meet acceptable strength and ductility requirements. Attempts at refining the as-cast-grain size have been unsuccessful. Because of the large grain size and limited slip systems, the casting will invariably crack during a hot-working step, which is an important step in the microstructural-refining process. The high reactivity of beryllium together with its high viscosity (even with substantial superheat) also makes it an unsuitable candidate for precision casting. In order to overcome these problems, alternative methods have been developed for the manufacturing of beryllium. The vast majority of these methods involve the use of beryllium powders. The powders are consolidated under pressure in vacuum at an elevated temperature to produce vacuum hot-pressed (VHP) blocks and vacuum hot-isostatic-pressed (HIP) forms and billets. The blocks (typically cylindrical), which are produced over a wide range of sizes (up to 183 cm dia. by 61 cm high), may be cut or machined into parts or be thermomechanically processed to develop the desired microstructure, properties, and shapes. Vacuum hot-isostatic pressing and cold-isostatic pressing (CIP) followed by sintering and possibly by a final HIP'ing (CIP/Sinter/HIP) are important in their use for the production of near net-shaped parts. For the same starting powder, a HIP'ed product will have less anisotropy than that obtained for a VHP'ed product. A schematic presentation illustrating the difference between VHP'ing and HIP'ing is shown in Figure I-1. The types of powders and the various beryllium grades produced from the consolidated powders and their ambient-temperature mechanical properties were presented in the consolidation report referred to above. Elevated-temperature properties and the effect of processing variables on mechanical properties are described in the mechanical properties report. Beryllium can also be deposited as coatings as well as freestanding forms. The microstructure, properties, and various methods used that are related to the deposition of beryllium are discussed in the report on beryllium coatings.

Goldberg, A

2006-06-30T23:59:59.000Z

173

Advanced Manufacture of Reflectors  

SciTech Connect (OSTI)

The main project objective has been to develop an advanced gravity sag method for molding large glass solar reflectors with either line or point focus, and with long or short focal length. The method involves taking standard sized squares of glass, 1.65 m x 1.65 m, and shaping them by gravity sag into precision steel molds. The method is designed for high volume manufacture when incorporated into a production line with separate pre-heating and cooling. The performance objectives for the self-supporting glass mirrors made by this project include mirror optical accuracy of 2 mrad root mean square (RMS), requiring surface slope errors <1 mrad rms, a target not met by current production of solar reflectors. Our objective also included development of new methods for rapidly shaping glass mirrors and coating them for higher reflectivity and soil resistance. Reflectivity of 95% for a glass mirror with anti-soil coating was targeted, compared to the present ~94% with no anti-soil coating. Our mirror cost objective is ~$20/m2 in 2020, a significant reduction compared to the present ~$35/m2 for solar trough mirrors produced for trough solar plants. During the first year a custom batch furnace was built to develop the method with high power radiative heating to simulate transfer of glass into a hot slumping zone in a production line. To preserve the original high polish of the float glass on both front and back surfaces, as required for a second surface mirror, the mold surface is machined to the required shape as grooves which intersect the glass at cusps, reducing the mold contact area to significantly less than 1%. The mold surface is gold-plated to reflect thermal radiation. Optical metrology of glass replicas made with the system has been carried out with a novel, custom-built test system. This test provides collimated, vertically-oriented parallel beams from a linear array of co-aligned lasers translated in a perpendicular direction across the reflector. Deviations of each reflected beam from the paraboloid focus give a direct measure of surface slope error. Key findings A gravity sag method for large (2.5 m2) second surface glass solar reflectors has been developed and demonstrated to a uniquely high level of accuracy. Mirror surface slope accuracy of 0.65 mrad in one dimension, 0.85 mrad in 2 dimensions (point focus) has been demonstrated by commercial partner REhnu using this process. This accuracy exceeds by a factor of two current solar reflector accuracy. Our replicas meet the Sunshot accuracy objective of 2 mrad optical, which requires better than 1 mrad rms slope error. Point-focus as well as line-focus mirrors have been demonstrated at 1.65 m x 1.65 m square a unique capability. The new process using simple molds is economical. The molds for the 1.65 m square reflectors are bent and machined steel plates on a counter-weighted flotation support. To minimize thermal coupling by radiative heat transfer, the mold surface is grooved and gilded. The molds are simple to manufacture, and have minimal thermal stresses and distortion in use. Lapping and bending techniques have been developed to obtain better than 1 mrad rms surface mold accuracy. Float glass is sagged into the molds by rapid radiative heating, using a custom high power (350 kW) furnace. The method of manufacture is well suited for small as well as large volume production, and as it requires little capital investment and no high technology, it could be used anywhere in the world to make solar concentrating reflectors. A novel slope metrology method for full 1.65 aperture has been demonstrated, with 25 mm resolution across the face of the replicas. The method is null and therefore inherently accurate: it can easily be reproduced without high-tech equipment and does not need sophisticated calibration. We find by cross calibration with reference trough reflectors from RioGlass that our null-test laser system yields a measurement accuracy better than 0.4 mrad rms slope error. Our system is inexpensive and could have broad application for test

Angel, Roger [University of Arizona

2014-12-17T23:59:59.000Z

174

Advanced Manufacturing Policies and Paradigms for Innovation  

Science Journals Connector (OSTI)

...2013 ). 4 About the Advanced Manufacturing Partnership 2.0; www.manufacturing.gov/amp.html. 5 For example , www1.eere.energy.gov/manufacturing/; www.darpa.mil/Our_Work/TTO/Programs/Adaptive_Vehicle_Make__%28AVM...

William B. Bonvillian

2013-12-06T23:59:59.000Z

175

Prototype Design, Manufacturing, and Testing  

Science Journals Connector (OSTI)

Prototyping describes the practical realization of the theoretical concept of the nonimaging Fresnel lens. The steps that are to be taken in order to get a working prototype of the lens manufactured are as fol...

Dr. Ralf Leutz; Dr. Akio Suzuki

2001-01-01T23:59:59.000Z

176

Laser Additive Manufacturing in GE  

Science Journals Connector (OSTI)

There has been an increasing interest given to laser additive manufacturing (LAM) in recent years from across the global. GE has been one of the leading industries engaging in this...

Peng, Henry; Li, Yanmin; Guo, Rui; Wu, Zhiwei

177

Photovoltaics Manufacturing in Developing Countries  

Science Journals Connector (OSTI)

The need for energy sources in the developing countries might be partially satisfied by using photovoltaic power systems in addition to conventional means. A review of photovoltaic manufacturing in developing ...

G. Darkazalli; S. Hogan

1991-01-01T23:59:59.000Z

178

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

S Y M n i 1 y 2 i (W i ) (W i 1) , Energy Information Administration, Manufacturing Energy Consumption Survey: Methodological Report 1985. Although this report describes 44...

179

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Survey Design, Survey Design, Implementation, and Estimates 411 Energy Information Administration/Manufacturing Consumption of Energy 1994 Overview of Changes from Previous Surveys Sample Design. The MECS has increased its sample size by roughly 40 percent since the 1991 survey, increasing the designed sample size from 16,054 establishments to 22,922. This increase in size and change in sampling criteria required a departure from using the Annual Survey of Manufactures (ASM) as the MECS sampling frame. For 1994, establishments were selected directly from the 1992 Census of Manufactures (CM) mail file, updated by 1993 ASM. Sample Frame Coverage. The coverage in the 1994 MECS is 98 percent of the manufacturing population as measured in total payroll. The sampling process itself provided that level of coverage, and no special adjustments were

180

Fenner acquires PTFE seal manufacturer  

Science Journals Connector (OSTI)

Fenner Plc has announced the acquisition of substantially all of the operating assets and liabilities of EGC, a Houston-based manufacturer of fluoroplastic seals and other related fluoroplastic precision components.

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Funding Opportunity Announcement for Water Power Manufacturing...  

Energy Savers [EERE]

Funding Opportunity Announcement for Water Power Manufacturing Funding Opportunity Announcement for Water Power Manufacturing April 11, 2014 - 11:23am Addthis On April 11, 2014,...

182

Additive manufacturing: technology, applications and research needs  

Science Journals Connector (OSTI)

Additive manufacturing (AM) technology has been researched and ... complexities that could not be produced by subtractive manufacturing processes. Through intensive research over the past...

Nannan Guo; Ming C. Leu

2013-09-01T23:59:59.000Z

183

A Management Strategy for Additive Manufacturing:.  

E-Print Network [OSTI]

??The thesis is about a Management Strategy for Additive Manufacturing - how engineering change influences the NPD process through the adoption of new manufacturing technology. (more)

Zahn, N.Z.

2014-01-01T23:59:59.000Z

184

Advanced Manufacturing Initiative Improves Turbine Blade Productivity...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Advanced Manufacturing Initiative Improves Turbine Blade Productivity Advanced Manufacturing Initiative Improves Turbine Blade Productivity May 20, 2011 - 2:56pm Addthis This is an...

185

Request for Information (RFI): Advanced Manufacturing Office...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Manufacturing Office (AMO) Software Tools Request for Information (RFI): Advanced Manufacturing Office (AMO) Software Tools July 25, 2014 - 1:00pm Addthis Funding: This...

186

Solar Manufacturing Technology 2 | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solar Manufacturing Technology 2 Solar Manufacturing Technology 2 The PV awards span the supply chain from novel methods to make silicon wafers, to advanced cell and metallization...

187

Autogenic Pressure Reactions for Battery Materials Manufacture...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Battery Materials Manufacture Technology available for licensing: A unique method for anode and cathode manufacture A one-step, solvent-free reaction for producing unique...

188

2014 American Energy & Manufacturing Competitiveness Summit in...  

Office of Environmental Management (EM)

Council on Competitiveness 9 of 10 Advanced Manufacturing Office Director Mark Johnson delivers the lunch keynote during the American Energy & Manufacturing Competitiveness...

189

National Electrical Manufacturers Association (NEMA) Response...  

Broader source: Energy.gov (indexed) [DOE]

Electrical Manufacturers Association (NEMA) Response to Smart Grid RFI National Electrical Manufacturers Association (NEMA) Response to Smart Grid RFI The National Electrical...

190

Explore Careers in Manufacturing | Department of Energy  

Office of Environmental Management (EM)

in U.S. manufacturing. The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous...

191

Advanced Technology Vehicles Manufacturing Loan Program | Department...  

Broader source: Energy.gov (indexed) [DOE]

Technology Vehicles Manufacturing Loan Program Advanced Technology Vehicles Manufacturing Loan Program ATVM-Program-Application-Overview.pdf More Documents & Publications ATVM...

192

Advanced Technology Vehicles Manufacturing Incentive Program...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program This is an interim final rule that establishes the...

193

Mother nature as a wire manufacturer | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mother nature as a wire manufacturer Mother nature as a wire manufacturer With computational models, scientists see how microbe directs electrons New research shows how electrons...

194

Mechanical and Manufacturing Engineering Mechatronics Engineering Minor  

E-Print Network [OSTI]

Mechanical and Manufacturing Engineering Mechatronics Engineering Minor Students pursuing a BSc in mechanical or manufacturing engineering have experience and entrepreneurship. Mechatronics is the synergistic combination of mechanical

Calgary, University of

195

Understanding Manufacturing Energy and Carbon Footprints, October...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications Understanding the 2010 Manufacturing Energy and Carbon Footprints U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis U.S....

196

Majors offered at other UGA Campuses Programs Offered on the Griffin Campus  

E-Print Network [OSTI]

.D.) Workforce Education (Ed.S.) Workforce Education (M.Ed.) Workforce Education (Ed.D.) Programs Offered Leadership (Ed.D.) Environmental Planning and Design (M.E.P.D./M.E.P.D. Non-Thesis) Food Technology (M@uga.edu Financial Planning, Housing and Consumer Economics (M.S., Non-Thesis) Contact: Ann Woodyard 706

Arnold, Jonathan

197

Clean Energy Manufacturing Initiative | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative July 10, 2013 - 1:52pm Addthis Boosting U.S. competitiveness in clean energy manufacturing Boosting U.S. competitiveness in clean energy manufacturing The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the Office of Energy Efficiency & Renewable Energy's (EERE) clean energy technology offices and Advanced Manufacturing Office, focusing on American competitiveness in clean energy manufacturing. alex was here Addthis Related Articles Manufacturing is the bedrock of the American economy, representing nearly 12 percent of our gross domestic product and providing good, high-paying jobs for middle class families. That's why the Energy Department is working to boost U.S. manufacturing competitiveness. | Photo courtesy of Alcoa.

198

Marketing energy conservation options to Northwest manufactured home buyers. Revision 1  

SciTech Connect (OSTI)

Manufactured, or HUD-Code, homes comprise a growing share of the housing stock in the Northwest, as well as nationally. Their relatively low cost has made them especially attractive to lower income families, first-time home-buyers, and retired persons. The characteristics of manufactured home (MH) buyers, the unique energy consumption characteristics of the homes, and their increasing market share make this market an especially critical one for energy consumption and conservation planning in the Northwest. This study relies on extensive, existing survey data and new analyses to develop information that can potentially assist the design of a marketing plan to achieve energy conservation in new manufactured homes. This study has the objective of assisting BPA in the development of a regional approach in which numerous organizations and parties would participate to achieve conservation in new manufactured homes. A previous survey and information collected for this study from regional dealers and manufacturers provide an indication of the energy conservation options being sold to manufactured home buyers in the PNW. Manufacturers in the Northwest appear to sell homes that usually exceed the HUD thermal requirements. Manufacturers typically offer efficiency improvements in packages that include fixed improvements in insulation levels, glazing, and infiltration control. Wholesale costs of these packages range from about $100 to $1500. Typical packages include significant upgrades in floor insulation values with modest upgrades in ceilings and walls. This study identifies trends and impacts that a marketing plan should consider to adequately address the financial concerns of manufactured home buyers.

Hendrickson, P.L.; Mohler, B.L.; Taylor, Z.T.; Lee, A.D.; Onisko, S.A.

1985-10-01T23:59:59.000Z

199

PEM Stack Manufacturing: Industry Status  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

© 2009 BALLARD POWER SYSTEMS INC. ALL RIGHTS RESERVED © 2009 BALLARD POWER SYSTEMS INC. ALL RIGHTS RESERVED JULY 2009 B U I L D I N G A C L E A N E N E R G Y G R O W T H C O M P A N Y B A L L A R D P O W E R S Y S T E M S PEM Stack Manufacturing: Industry Status Duarte R. Sousa, PE August 11, 2011 AUGUST 2009 P A G E 2 Overview of PEM Stack Manufacturing MEA Manufacturing Plate Manufacturing Stack Assembly Stack Conditioning and Testing Package and Ship For each of the four main processes, the following will be provided: 1. A brief history of where we have been; 2. Where we are today; 3. Where we would like to transition to; 4. Gaps and proposals. AUGUST 2009 P A G E 3 PEM Stack Manufacturing: Cost Overview * The MEA was readily identified as the major cost driver in a 10 kW stationary stack. * The precious metal catalyst electrode is the major cost driver for the MEA.

200

Oak Ridge Manufacturing Demonstration Facility (MDF)  

Office of Energy Efficiency and Renewable Energy (EERE)

The Manufacturing Demonstration Facility (MDF) is a collaborative manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused on Additive Manufacturing and Low-cost Carbon Fiber.

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Designing a National Network for Manufacturing Innovation  

E-Print Network [OSTI]

Designing a National Network for Manufacturing Innovation NNMI and The Additive Manufacturing Pilot Introduction · NNMI principles · Public NMMI Design · Pilot Institute on Additive Manufacturing #12;IMI Mission Process, such as Additive Manufacturing An Advanced Material ­ e.g. lightweight, low cost carbon fiber

202

1 - Honeywell Bull in manufacturing automation  

Science Journals Connector (OSTI)

economy, the manufacturing industry has undergone great changes over the past 25 years. Now, with the expansion of computerised manufacturing control applications, computer manufacturers can meet the specialised needs of the manufacturing community. This paper also examines the CIM architecture at all levels, looks at current standards and at Honeywell Bull as a supplier.

R. Anderson

1988-01-01T23:59:59.000Z

203

Manufacturing Spotlight: Boosting American Competitiveness | Department of  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Spotlight: Boosting American Competitiveness Manufacturing Spotlight: Boosting American Competitiveness Manufacturing Spotlight: Boosting American Competitiveness January 6, 2014 - 1:06pm Addthis Libby Wayman Clean Energy Manufacturing Initiative Director Advancing the nation's clean energy manufacturing industry helps to capture the value of U.S. innovation in clean energy technologies, fosters further innovation right here in America, and makes U.S. manufacturers more competitive by reducing their energy costs - all while creating jobs and building a more sustainable planet for future generations. Industry and government are working together to expand American leadership in this sector by bringing new clean energy technologies to the marketplace and making manufacturing processes more energy efficient.

204

Manufacturing Consumption of Energy 1994  

Gasoline and Diesel Fuel Update (EIA)

Energy Information Administration/Manufacturing Consumption of Energy 1994 Energy Information Administration/Manufacturing Consumption of Energy 1994 Introduction The market for natural gas has been changing for quite some time. As part of natural gas restructuring, gas pipelines were opened to multiple users. Manufacturers or their representatives could go directly to the wellhead to purchase their natural gas, arrange the transportation, and have the natural gas delivered either by the local distribution company or directly through a connecting pipeline. More recently, the electricity markets have been undergoing change. When Congress passed the Energy Policy Act of 1992, requirements were included not only to open access to the ownership of electricity generation, but also to open access to the transmission lines so that wholesale trade in electricity would be possible. Now several States, including California and

205

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ion Beam Manufacture Ion Beam Manufacture PDF format (113 kb) Example sine wave FIB sputtered into initially planar Si substrate Example sine wave FIB sputtered into initially planar Si substrate Sandia Manufacturing Science & Technology's Focused Ion Beam (FIB) laboratory provides an opportunity for research, development and prototyping. Currently, our scientists are developing methods for ion beam sculpting microscale tools, components and devices. This includes shaping of specialty tools such as end-mills, turning tools and indenters. Many of these have been used in ultra-precision machining DOE applications. Additionally, staff are developing the capability to ion mill geometrically-complex features and substrates. This includes the ability to sputter predetermined curved shapes of various symmetries and

206

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

Manufacturing Manufacturing Energy Consumption Survey Forms Form EIA-846A (4-6-95) U.S. Department of Commerce Bureau of the Census Acting as Collecting and Compiling Agent For 1994 MANUFACTURING ENERGY CONSUMPTION SURVEY Public reporting burden for this collection of information is estimated to average 9 hours per response, including the time of reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Energy Information Administration, Office of Statistical Standards, EI-73, 1707 H-Street, NW, Washington, DC 20585; and to the Office of Information and Regulatory Affairs, Office of

207

Manufacturing Services | Data.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Services Services Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing Services Do you have a new idea? You may need to file a patent to both develop it and protect it. Find out more below. Search for existing patents Apply for a patent Business Owners Getting a business started, established, and growing is difficult. We want to make that easier. Check out the government services below that are available to businesses, and find out more about what's coming with StartUp America. Start a business Access financing Find opportunities to sell products and services to the government Grow your business Help with exporting for beginners and for experts. Shared Facilities Facilities can be a huge factor in whether you create a new product or

208

Manufacturing Energy and Carbon Footprints (2006 MECS)  

Broader source: Energy.gov [DOE]

Energy and Carbon Footprints provide a mapping of energy from supply to end use in manufacturing. They show us where energy is used and lostand where greenhouse gases (GHGs) are emitted. Footprints are available below for 15 manufacturing sectors (representing 94% of all manufacturing energy use) and for U.S. manufacturing as a whole. Analysis of these footprints is also available in the U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis report.

209

Power Quality from the Manufacturers Standpoint  

E-Print Network [OSTI]

Power quality is an unstable field (if you'll pardon the double meaning). It's in its infancy; there isn't general agreement on much, not even terminology. As an instrument manufacturer in the field, I'm particularly concerned with two philosophical...

McEachern, A.

210

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Thin Films Thin Films PDF format (189 kb) Multi Layer Thin Films Multi Layer Thin Films Planetary Sputtering SystemsPlanetary Sputtering Systems Planetary Sputtering Systems The Thin Film laboratory within Manufacturing Science & Technology provides a variety of vapor deposition processes and facilities for cooperative research and development. Available capabilities include electron beam evaporation, sputter deposition, reactive deposition processes, atomic layer deposition (ALD) and specialized techniques such as focused ion beam induced chemical vapor deposition. Equipment can be reconfigured for prototyping or it can be dedicated to long-term research, development and manufacturing. Most sputter and evaporative deposition systems are capable of depositing multiple materials.

211

Big Efficieny for Small Manufacturing  

E-Print Network [OSTI]

Big Efficiency for Small Manufacturing Daniel Trombley American Council for an Energy-Efficient Economy Presented to: Industrial Energy Technology Conference New Orleans, LA May 21, 2014 ESL-IE-14-05-10 Proceedings of the Thrity-Sixth Industrial...-Sized Manufacturers http://www.aceee.org/research-report/ie1401 Daniel Trombley dtrombley@aceee.org www.aceee.org ESL-IE-14-05-10 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 ...

Trombley, D.

2014-01-01T23:59:59.000Z

212

Alternative Fuels Data Center: Alternative Fuel Offering Requirement  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Alternative Fuel Alternative Fuel Offering Requirement to someone by E-mail Share Alternative Fuels Data Center: Alternative Fuel Offering Requirement on Facebook Tweet about Alternative Fuels Data Center: Alternative Fuel Offering Requirement on Twitter Bookmark Alternative Fuels Data Center: Alternative Fuel Offering Requirement on Google Bookmark Alternative Fuels Data Center: Alternative Fuel Offering Requirement on Delicious Rank Alternative Fuels Data Center: Alternative Fuel Offering Requirement on Digg Find More places to share Alternative Fuels Data Center: Alternative Fuel Offering Requirement on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Alternative Fuel Offering Requirement The Massachusetts Department of Transportation may not enter into, renew,

213

Program Offers New Spin on Traditional Marketing | Department...  

Broader source: Energy.gov (indexed) [DOE]

Program Offers New Spin on Traditional Marketing Program Offers New Spin on Traditional Marketing A photo of several boys in matching T-shirts dancing on a paved surface....

214

Indianapolis Offers a Lesson on Driving Demand | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Indianapolis Offers a Lesson on Driving Demand Indianapolis Offers a Lesson on Driving Demand The flier for EcoHouse, with the headline 'Save energy, save money, improve your home'...

215

Sustainable Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing-Informed Design, April 2013  

Broader source: Energy.gov [DOE]

Sustainable Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing-Informed Design

216

Manufacturing Energy and Carbon Footprints  

E-Print Network [OSTI]

Significant opportunities exist for improving energy efficiency in U.S. manufacturing. A first step in realizing these opportunities is to identify how industry is using energy. Where does it come from? What form is it in? Where is it used? How much...

Brueske, S.; Lorenz, T.

2012-01-01T23:59:59.000Z

217

Additive manufacturing method of producing  

E-Print Network [OSTI]

Additive manufacturing method of producing silver or copper tracks on polyimide film Problem/stripping) using an additive process support by a novel bio- degradable photo-initiator package. technology. Building on previous work by Hoyd- Gigg Ng et al. [1,2], Heriot-Watt has developed an additive film

Painter, Kevin

218

The North Carolina Solar Center offers free and fee-based technical services for manufacturers and other  

E-Print Network [OSTI]

, Clean Energy Assessments, Industrial Energy Efficiency Assessments, and Industrial Energy Efficiency.chpcenterse.org. #12;Industrial Energy Efficiency Assessments In a joint effort led by the Mississippi Development, chemical processing, textile, plastics and resins and agribusiness, as well as government, institutional

219

"ONE HUNDRED YEARS OF SUPERCONDUCTIVITY", Dr. Michael Norman, Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

March 10, 2012, 9:30am March 10, 2012, 9:30am Science On Saturday "ONE HUNDRED YEARS OF SUPERCONDUCTIVITY", Dr. Michael Norman, Materials Science Division, Argonne National Laboratory http://mediacentral.princeton.edu/id/0_rs9hd00o PPPL Entrance Procedures Visitor Information, Directions, Security at PPPL As a federal facility, the Princeton Plasma Physics Laboratory is operating under heightened security measures because of the events of September 11, 2001. Upon arrival at PPPL, adult visitors must show a government-issued photo I.D. - for example, a passport or a driver's license. Non-U.S. citizens must show a government-issued photo I.D., plus provide the following information: citizenship, date of birth, and place of birth. For the safety of staff and visitors, PPPL security officers retain the

220

Recovery Act Workers Add Time Capsule Before Sealing Reactor for Hundreds of Years  

Broader source: Energy.gov (indexed) [DOE]

July 30, 2011 July 30, 2011 AIKEN, S.C. - American Recovery and Reinvestment Act work- ers at the Savannah River Site (SRS) placed a time capsule with a cache of timely news items inside a former nuclear reactor this week before sealing the 300,000-square foot facility shut for hundreds of years to allow radioactivity to naturally decay. The capsule, about the size of a five-gallon bucket, contained photos of DOE Secretary Steven Chu and President Obama, as well as an the site's strategic plan and an interactive CD on its history. Recovery Act team members also signed an aerial photo of the nearly six-decade-old P Reactor, and included it in the capsule. About 60 people gathered to watch DOE-Savannah River Man- ager Dr. David Moody, and Marc Sharpe, a senior reactor op-

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Additive manufacturing mechanical property assessment and part candidate screening  

Science Journals Connector (OSTI)

The field of rapid prototyping has demonstrated elements of production to become rapid manufacturing (RM). Key elements of this transition involve a distinct requirement for a consistent mechanical property evaluation technique to be used as a baseline for direct part fabrication. This research portrays proven techniques developed by industry to evaluate additive manufacturing (AM) for a variety of applications. Data are generated using the techniques provided and are applied to the generation of statistical analysis assessments. These data are compiled and used by design engineers to assess the technical feasibility of RM for integrated designs. Fused deposition modelling is gaining ground for AM applications. The research provided offers a path for technical specification development using case examples.

David M. Dietrich; Michael W. Hayes; Frank Liou

2011-01-01T23:59:59.000Z

222

Alternative Fuels Data Center: Hybrid Electric Shuttle Buses Offer Free  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Hybrid Electric Hybrid Electric Shuttle Buses Offer Free Rides in Maryland to someone by E-mail Share Alternative Fuels Data Center: Hybrid Electric Shuttle Buses Offer Free Rides in Maryland on Facebook Tweet about Alternative Fuels Data Center: Hybrid Electric Shuttle Buses Offer Free Rides in Maryland on Twitter Bookmark Alternative Fuels Data Center: Hybrid Electric Shuttle Buses Offer Free Rides in Maryland on Google Bookmark Alternative Fuels Data Center: Hybrid Electric Shuttle Buses Offer Free Rides in Maryland on Delicious Rank Alternative Fuels Data Center: Hybrid Electric Shuttle Buses Offer Free Rides in Maryland on Digg Find More places to share Alternative Fuels Data Center: Hybrid Electric Shuttle Buses Offer Free Rides in Maryland on AddThis.com... June 18, 2010

223

Explore Careers in Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Careers in Manufacturing Careers in Manufacturing Explore Careers in Manufacturing About the Advanced Manufacturing Office The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous improvement in corporate energy management to bring about a transformation in U.S. manufacturing. Image of scientists examining an experiment. back to top What types of jobs are available? Innovation Process Design & Development Engineers Mechanical Electrical Chemical Biochemical Health Safety Environmental Scientists Materials Computer Automation Software Energy Storage Production Engineers Industrial systems Process Materials Equipment Controls Supply Chain Logistics Quality Control Maintenance, Installation & Repair Machinists Efficient Use

224

Manufacturers' View on Benchmarking and Disclosure  

U.S. Energy Information Administration (EIA) Indexed Site

Association of Electrical and Association of Electrical and Medical Imaging Equipment Manufacturers Manufacturing Solutions for Energy Efficiency in Buildings Patrick Hughes Policy Director, High Performance Buildings National Electrical Manufacturers Association The Association of Electrical and Medical Imaging Equipment Manufacturers What is NEMA? The Association of Electrical Equipment and Medical Imaging Manufacturers Which policies encourage energy efficiency in buildings? Energy Savings Performance Contracts Tax Incentives Shaheen- Portman Benchmarking and Disclosure Bullitt Center Seattle, Washington The Association of Electrical Equipment and Medical Imaging Manufacturers Energy Savings Performance Contracts ESPCs pay for efficiency upgrades with

225

Secure Manufacturing | Y-12 National Security Complex  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Secure Secure Manufacturing Secure Manufacturing The depth and breadth of Y-12's manufacturing capabilities and expertise enable Y-12 to address current and emerging national security challenges by providing leadership and direction to perform the following activities: solving unique, high-risk manufacturing problems; eliminating the most difficult manufacturability and development obstacles; protecting classified and proprietary materials, components, and information; developing unique technologies to optimize manufacturing and systems performance; and executing projects cost effectively and with timeliness. Y-12 accomplishes this mission to meet the national security challenges of today and those of the future, with capability and expertise in the following areas:

226

Batteries - Materials Processing and Manufacturing Breakout session  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Materials Processing and Manufacturing Materials Processing and Manufacturing Breakout Session #1 - Discussion of Performance Targets and Barriers Comments on the Achievability of the Targets * PHEV40 and AEV 100 possible with success in current R&D * Achievable with Li-ion manufacturing improvements and advanced chemistries in current Li-ion R&D * AEV300 more challenging * Requires manufacturing improvements and materials and chemistry improvements * Quantify benefits/ drawbacks of fast charging vs. increased electrode cost Barriers Interfering with Reaching the Targets * Materials cost * Need: Material synthesis in large quantities/ with increased impurities and broader size distributions or advanced manufacturing * Electrode thickness - manufacturing and performance * Separator cost/ performance/ safety

227

MST: Organizations: Manufacturing Processes & Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Processing Manufacturing Processing Manufacturing Process, Science, and Technology Mark Smith Mark Smith, Senior Manager Manufacturing Process Science and Technology conducts research and development on advanced manufacturing process and materials technologies. It provides manufacturing process development, technical consulting, and technology transfer to support Sandia product realization needs. This organization also provides prototype fabrication and specialized production services, as required, to support Sandia missions. Departments Dianna Blair Mike Kelly Alex Roesler Paul C. McKey Thin Film, Vacuum, and Packaging Organic Materials Ceramics and Glass Meso Mfg. and System Development Dianna Blair, Manager Mike Kelly, Manager Alex Roesler, Manager Paul C. McKey,

228

Advanced Manufacturing Office: Industrial Assessment Centers (IACs)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Assessment Industrial Assessment Centers (IACs) to someone by E-mail Share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Facebook Tweet about Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Twitter Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Google Bookmark Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Delicious Rank Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on Digg Find More places to share Advanced Manufacturing Office: Industrial Assessment Centers (IACs) on AddThis.com... Industrial Assessment Centers (IACs) Learn More Learn how companies have benefited from IAC assessments. Search the IAC Database for recommendations and savings achieved.

229

List of Manufacturing Groups Displayed in the 1998 Manufacturing Energy  

U.S. Energy Information Administration (EIA) Indexed Site

21 manufacturing subsectors (3-digit NAICS codes); 21 manufacturing subsectors (3-digit NAICS codes); 311 Food 312 Beverage and Tobacco Products 313 Textile Mills 314 Textile Product Mills 315 Apparel 316 Leather and Allied Products 321 Wood Products 322 Paper 323 Printing and Related Support 324 Petroleum and Coal Products 325 Chemicals 326 Plastics and Rubber Products 327 Nonmetallic Mineral Products 331 Primary Metals 332 Fabricated Metal Products 333 Machinery 334 Computer and Electronic Products 335 Electrical Equip., Appliances, and Components 336 Transportation Equipment 337 Furniture and Related Products 339 Miscellaneous 6 industry groups (4-digit NAICS codes); 3212 Veneer, Plywood, and Engineered Woods 3219 Other Wood Products 3272 Glass and Glass Products 3312 Steel Products from Purchased Steel 3313 Alumina and Aluminum

230

Sustainable manufacturing: evaluation and modeling of environmental impacts in additive manufacturing  

Science Journals Connector (OSTI)

Cleaner production and sustainability are of crucial importance in the field of manufacturing processes where great amounts of energy and materials are being consumed. Nowadays, additive manufacturing technologie...

Florent Le Bourhis; Olivier Kerbrat

2013-12-01T23:59:59.000Z

231

MANUFACTURING CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen  

Broader source: Energy.gov (indexed) [DOE]

MANUFACTURING MANUFACTURING CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen Telephone (510) 486-4506 Email dtchen@lbl.gov Industrial Gas Manufacturing 325120 All Other Basic Inorganic Chemical Manufacturing 325188 Plastics Material and Resin Manufacturing 325211 Explosives Manufacturing 325920 All Other Plastics Product Manufacturing 326199 Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding 331491 Fabricated Structural Metal Manufacturing 332312 Metal Tank (Heavy Gauge) Manufacturing 332420 Other Metal Container Manufacturing 332439 Machine Shops 332710 Electroplating, Plating, Polishing, Anodizing, and Coloring 332813 Industrial valve Manufacturing 332911 Other Ordnance and Accessories Manufacturing 332995 All Other Miscellaneous Fabricated Metal Product Manufacturing

232

Technology roadmapping in manufacturing: a case study at Siemens AG  

Science Journals Connector (OSTI)

The availability of specific technologies at the right time is a major factor for a companies success. To ensure this, the industry has the need for a holistic methodical support of technology management. This focuses on early activities like technology foresight and strategy development as well as controlling of individual projects until their full impact in the company's profitability. Technology roadmapping offers a process to support a holistic technology management. The approach of technology roadmapping is extended with the objective to mitigate existing risks and barriers and was tested successfully in a decentralised implementation in a manufacturing business unit for Gas Turbine Parts.

Jan-Marc Lischka; Hans Georg Gemunden

2008-01-01T23:59:59.000Z

233

Methods of communicating activities in pollution abatement by five hundred major industrial corporations in the United States  

E-Print Network [OSTI]

METHODS OF COMMUNICATING ACTIVITIES IN POLLUTION ABATEMENT BY FIVE HUNDRED MAJOR INDUSTRIAL CORPORATIONS IN THE UNITED STATES A Thesis by CHRISTINE ANN OUINN Submitted to the Graduate College of Texas A&M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1973 Major Subject: Educational Administration (Public Relations) METHODS OF COMMUNICATING ACTIVITIES IN POLLUTION ABATEMENT BY FIVE HUNDRED MAJOR INDUSTRIAL CORPORATIONS IN THE UNITED STATES A...

Quinn, Christine Ann

2012-06-07T23:59:59.000Z

234

Obama Administration Offers $59 Million in Conditional Loan Guarantees...  

Energy Savers [EERE]

Solyndra, Inc., which plans to construct a manufacturing plant to bring its cutting-edge solar technology to the commercial market. Secretary Chu has made it the priority of the...

235

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Meso-Machining Meso-Machining PDF format (182 kb) Sandia's Micro-Electro Discharge Machine (Micro-EDM) (above). On the upper right inset is the Micro-EDM electode in copper that was made with the LIGA (electroforming) process. On the lower right inset is a screen fabricated into .006 inch kovar sheet using the Micro-EDM electrode. The walls of the screen are .002 inch wide by .006 inch deep. Meso-machining technologies being developed at Sandia National Laboratories will help manufacturers improve a variety of production processes, tools, and components. Meso-machining will benefit the aerospace, automotive, biomedical, and defense industries by creating feature sizes from the 1 to 50 micron range. Sandia's Manufacturing Science and Technology Center is developing the

236

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

2(94) 2(94) Distribution Category UC-950 Manufacturing Consumption of Energy 1994 December 1997 Energy Information Administration Office of Energy Markets and End Use U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the U.S. Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. ii Energy Information Administration/Manufacturing Consumption of Energy 1994 Contacts This publication was prepared by the Energy Information Administration (EIA) under the general direction of W. Calvin

237

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. 1 The manufacturing sector is composed of establishments classified in Standard Industrial Classification 20 through 39 of the U.S. economy as defined 2 by the Office of Management and Budget. The manufacturing sector is a part of the industrial sector, which also includes mining; construction; and agriculture, forestry, and fishing. The EIA also conducts energy consumption surveys in the residential, commercial buildings, and residential transportation sectors: the Residential Energy 3 Consumption Survey (RECS); the Commercial Buildings Energy Consumption Survey (CBECS); and, until recently, the Residential Transportation Energy Consumption Survey (RTECS).

238

Electromagnetic compatibility in semiconductor manufacturing  

SciTech Connect (OSTI)

Electromagnetic Interference (EMI) causes problems in semiconductor manufacturing facilities that range from nuisances to major disruptions of production. In many instances, these issues are addressed in a reactionary rather than proactive manner by individuals who do not have the experience or the equipment necessary to combat EMI problems in a timely, cost effective manner. This approach leads to expensive retrofits, reduced equipment availability, long recovery times, and in some cases, line yield impacts. The goal of electromagnetic compatibility (EMC) in semiconductor manufacturing is to ensure that semiconductor process, metrology, and support equipment operate as intended without being affected by electromagnetic disturbances either transmitted through air (radiated interference), or transferred into the equipment via a conductive media (conducted interference). Rather than being neglected until serious issues arise, EMC should be considered in the early stages of facility design, in order to gain the most benefit at the lowest cost.

Montoya, J.A. [Intel Corp., Hillsboro, OR (United States)

1995-12-31T23:59:59.000Z

239

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

E E U.S. Census Regions and Divisions 489 Energy Information Administration/Manufacturing Consumption of Energy 1994 Source: U.S. Department of Commerce, Bureau of the Census, Statistical Abstract of the United States,1996 (Washington, DC, October 1996), Figure 1. Appendix E U.S. Census Regions and Divisions Appendix F Descriptions of Major Industrial Groups and Selected Industries Executive Office of the President, Office of Management and Budget, Standard Industrial Classification Manual, 1987, pp. 67-263. 54 493 Energy Information Administration/Manufacturing Consumption of Energy 1994 Appendix F Descriptions of Major Industrial Groups and Selected Industries This appendix contains descriptions of industrial groups and selected industries taken from the Standard Industrial

240

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

(MECS) > MECS 1994 Combined Consumption and Fuel Switching (MECS) > MECS 1994 Combined Consumption and Fuel Switching Manufacturing Energy Consumption Survey 1994 (Combined Consumption and Fuel Switching) Manufacturing Energy Consumption Logo Full Report - (file size 5.4 MB) pages:531 Selected Sections (PDF format) Contents (file size 56 kilobytes, 10 pages). Overview (file size 597 kilobytes, 11 pages). Chapters 1-3 (file size 265 kilobytes, 9 pages). Chapter 4 (file size 1,070 kilobytes, 15 pages). Appendix A - Detailed Tables Tables A1 - A8 (file size 1,031 kilobytes, 139 pages). Tables A9 - A23 (file size 746 kilobytes, 119 pages). Tables A24 - A29 (file size 485 kilobytes, 84 pages). Tables A30 - A44 (file size 338 kilobytes, 39 pages). Appendix B (file size 194 kilobytes, 24 pages). Appendix C (file size 116 kilobytes, 16 pages).

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Fact Sheet: 48C Manufacturing Tax Credits  

Broader source: Energy.gov (indexed) [DOE]

48C Manufacturing Tax Credits 48C Manufacturing Tax Credits In order to foster investment and job creation in clean energy manufacturing, the American Recovery and Reinvestment Act of 2009 included a tax credit for investments in manufacturing facilities for clean energy technologies. The Section 48C Advanced Manufacturing Tax Credit originally provided a 30% investment tax credit to 183 domestic clean energy manufacturing facilities valued at $2.3 billion. Today the IRS has announced the availability of additional 48C allocations, utilizing $150 million remaining tax credits that were never fully monetized by previous awardees. This tax credit program will help build a robust U.S. manufacturing capacity to supply clean energy projects with American-made parts and equipment. These manufacturing facilities will also

242

Manufacturing Demonstration Facility (MDF) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Demonstration Facility (MDF) Manufacturing Demonstration Facility (MDF) Manufacturing Demonstration Facility (MDF) October 11, 2013 - 9:44am Addthis The Manufacturing Demonstration Facility (MDF) is a collabora-tive manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused on Additive Manufacturing and Low-cost Carbon Fiber. Fostering Collaboration to Accelerate Progress Work conducted by MDF partners and users provides real data that is used to reduce the technical risk associated with full commercialization of promising foundational manufacturing process and materials innovations. The

243

Objective assessment of manufacturing technology investments  

E-Print Network [OSTI]

Amgen is a biotechnology company with manufacturing plants throughout the world. New manufacturing technologies are constantly being developed and implemented in order to address cost, quality, regulation, and competitive ...

Rothman, Craig Jeremy

2012-01-01T23:59:59.000Z

244

FACT SHEET: 48C MANUFACTURING TAX CREDITS  

Office of Energy Efficiency and Renewable Energy (EERE)

The Advanced Energy Manufacturing Tax Credit Program is helping build a robust U.S. manufacturing capacity to supply clean energy projects with American-made parts and equipment.On February 7,...

245

Upcoming Funding Opportunity for Water Power Manufacturing |...  

Energy Savers [EERE]

Water Power Manufacturing Upcoming Funding Opportunity for Water Power Manufacturing March 24, 2014 - 12:00pm Addthis On March 24, 2014, the U.S. Department of Energy (DOE)...

246

Creation and sustainment of manufacturing technology roadmaps  

E-Print Network [OSTI]

Manufacturing technology roadmaps align manufacturing capability development to product development and the driving business need. Roadmaps allow an executable business strategy to be communicated to all levels of an ...

Grillon, Louis S

2012-01-01T23:59:59.000Z

247

Benefits and Barriers of Smart Manufacturing  

E-Print Network [OSTI]

Decision makers in the industrial sector have only recently started to realize the potential of smart manufacturing to transform manufacturing. The potential gains in efficiency at the process and supply-chain level are still largely unknown...

Trombley, D.; Rogers, E.

2014-01-01T23:59:59.000Z

248

Refrigerator Manufacturers: Order (2013-CE-5341)  

Broader source: Energy.gov [DOE]

DOE ordered Refrigerator Manufacturers, LLC to pay a $8,000 civil penalty after finding Refrigerator Manufacturers had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

249

Building Blocks for the Future of Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for the Future of Manufacturing Building Blocks for the Future of Manufacturing Scott Smith 2011.05.04 Even though we grew up on opposite sides of the world, my colleague...

250

SunShot Initiative: Solar Manufacturing Technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solar Manufacturing Technology to Solar Manufacturing Technology to someone by E-mail Share SunShot Initiative: Solar Manufacturing Technology on Facebook Tweet about SunShot Initiative: Solar Manufacturing Technology on Twitter Bookmark SunShot Initiative: Solar Manufacturing Technology on Google Bookmark SunShot Initiative: Solar Manufacturing Technology on Delicious Rank SunShot Initiative: Solar Manufacturing Technology on Digg Find More places to share SunShot Initiative: Solar Manufacturing Technology on AddThis.com... Concentrating Solar Power Photovoltaics Research & Development Competitive Awards Diversity in Science and Technology Advances National Clean Energy in Solar Grid Engineering for Accelerated Renewable Energy Deployment Physics of Reliability: Evaluating Design Insights for Component

251

QTR Webinar: Chapter 8- Industry and Manufacturing  

Broader source: Energy.gov [DOE]

The DOE EERE Advanced Manufacturing Office hosted a QTR webinar to obtain input from Leaders in Academia, Industry, and Government on Chapter 8, Industry and Manufacturing, and the associated Technology Assessments.

252

Manufacturing of Plutonium Tensile Specimens  

SciTech Connect (OSTI)

Details workflow conducted to manufacture high density alpha Plutonium tensile specimens to support Los Alamos National Laboratory's science campaigns. Introduces topics including the metallurgical challenge of Plutonium and the use of high performance super-computing to drive design. Addresses the utilization of Abaqus finite element analysis, programmable computer numerical controlled (CNC) machining, as well as glove box ergonomics and safety in order to design a process that will yield high quality Plutonium tensile specimens.

Knapp, Cameron M [Los Alamos National Laboratory

2012-08-01T23:59:59.000Z

253

Clean Energy Manufacturing Initiative Industrial Efficiency and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial...

254

Manufacturing Energy and Carbon Footprints Scope  

Broader source: Energy.gov [DOE]

List of manufacturing sectors selected for analysis along with North American Industry Classification System (NAICS) code descriptions

255

Webinar: Additive Manufacturing for Fuel Cells  

Broader source: Energy.gov [DOE]

Video recording and text version of the webinar titled "Additive Manufacturing for Fuel Cells," originally presented on February 11, 2014.

256

Honda: North American Manufacturing Facilities | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Facilities From October, 2008 Honda: North American Manufacturing Facilities More Documents & Publications Johnson Controls: EISA Presentation MEMA: Comments AZ Automotive...

257

Industrial Scale Demonstration of Smart Manufacturing Achieving...  

Broader source: Energy.gov (indexed) [DOE]

application of customized sensor driven modeling, measurement simulation technologies, energy management dashboards and a variety of manufacturing metrics for individual...

258

Low Temperature PEM Fuel Cell Manufacturing Needs  

E-Print Network [OSTI]

Low Temperature PEM Fuel Cell Manufacturing Needs Presented by Duarte Sousa, PE Manufacturing Fuel Cell Manhattan Project #12; Cost drivers were identified for the following: · MEA · Plates · Balance of Plant (BOP) · Fuel Processing Manufacturing Fuel Cell Project ­ Phase 1 Note that this presentation

259

Additive manufacturing of metallic tracks on  

E-Print Network [OSTI]

Additive manufacturing of metallic tracks on green ceramic/dielectrics Problem this technology (note: may require additional tooling/ set up time) · Rapid Prototyping & small scale manufacture microelectronics such as manufacture of LTCC ceramic/ Dielectric antenna and rapid PCB prototyping or repair

Painter, Kevin

260

Pseudomonas fluorescens -A robust manufacturing platform  

E-Print Network [OSTI]

Pseudomonas fluorescens -A robust manufacturing platform Reprinted from July/August 2004 Speciality at efficient- ly transporting single chain antibodies and other mammalian-derived proteins. In addition production. Dowpharma, a contract manufacturing services unit of Dow Chemical, has developed a manufacturing

Lebendiker, Mario

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

e! Science News Semiconductor manufacturing technique holds  

E-Print Network [OSTI]

arsenide chips manufactured in multilayer stacks: light sensors, high-speed transistors and solar cellse! Science News Semiconductor manufacturing technique holds promise for solar energy Published semiconductor manufacturing method pioneered at the University of Illinois, the future of solar energy just got

Rogers, John A.

262

EFFECTIVE STRUCTURAL HEALTH MONITORING WITH ADDITIVE MANUFACTURING  

E-Print Network [OSTI]

will be presented for components that can be processed by additive manufacturing (AM) or 3D printing. The origin structures. KEYWORDS : structural health monitoring methodology, 3D printing, additive manufacturing, fatigue, intelligent structure INTRODUCTION Additive manufacturing (AM), also known as 3D Printing or Rapid

Boyer, Edmond

263

Residential Energy Efficiency Rebates (Offered by 5 Utilities) | Department  

Broader source: Energy.gov (indexed) [DOE]

Residential Energy Efficiency Rebates (Offered by 5 Utilities) Residential Energy Efficiency Rebates (Offered by 5 Utilities) Residential Energy Efficiency Rebates (Offered by 5 Utilities) < Back Eligibility Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Appliances & Electronics Heat Pumps Commercial Lighting Lighting Program Info State North Dakota Program Type Utility Rebate Program Rebate Amount Ceiling Fan: $25 Clothes Washer: $50 Decorative Light Strings: $3.50/string Dehumidifier: $10 Dishwasher: $25 Refrigerator: $50 Room Air Conditioner: $15 Home Heating and Cooling: Varies Provider Missouri River Energy Services Bright Energy Solutions offers energy efficiency cash incentive programs to residential and business customers of municipal utilities that are members

264

Residential Energy Efficiency Rebates (Offered by 11 Utilities) |  

Broader source: Energy.gov (indexed) [DOE]

Residential Energy Efficiency Rebates (Offered by 11 Utilities) Residential Energy Efficiency Rebates (Offered by 11 Utilities) Residential Energy Efficiency Rebates (Offered by 11 Utilities) < Back Eligibility Commercial Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Other Appliances & Electronics Heat Pumps Commercial Lighting Lighting Water Heating Program Info State South Dakota Program Type Utility Rebate Program Rebate Amount Varies by Technology Provider Missouri River Energy Solutions Bright Energy Solutions offers energy efficiency cash incentive programs to [http://www.dsireusa.org/incentives/incentive.cfm?Incentive_Code=SD60F&re... residential] and business customers of municipal utilities that are members of Missouri River Energy Services. In South Dakota, this includes:

265

National Instruments online training and training credits offering...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

offer online training and training credits for those interested in attending instructor led web or classroom sessions on the latest NI tools. Self-paced online training is...

266

Department of Energy Offers $2.1 Billion Conditional Commitment...  

Broader source: Energy.gov (indexed) [DOE]

.1 Billion Conditional Commitment Loan Guarantee to Support California Solar Thermal Power Plant Department of Energy Offers 2.1 Billion Conditional Commitment Loan Guarantee to...

267

Department of Energy Offers $2 Billion in Conditional Loan Guarantee...  

Broader source: Energy.gov (indexed) [DOE]

Commitments for Two California Concentrating Solar Power Plants Department of Energy Offers 2 Billion in Conditional Loan Guarantee Commitments for Two California...

268

Department of Energy Offers Conditional Commitment for Loan Guarantee...  

Energy Savers [EERE]

Loan Guarantee to Support Solar Generation Project in Nevada Department of Energy Offers Conditional Commitment for Loan Guarantee to Support Solar Generation Project in Nevada May...

269

Innovative High Energy Density Capacitor Design Offers Potential...  

Broader source: Energy.gov (indexed) [DOE]

like TroyCap's High Density Energy Nanolaminate Capacitor (HEDCAP) that may offer new clean energy applications to meet the nation's strategic energy goals and secure...

270

Department of Energy Offers Conditional Commitment for a Loan...  

Energy Savers [EERE]

of a conditional commitment for a 350 million loan guarantee to develop the One Nevada Transmission Line (ON Line), the first transmission line project to be offered a...

271

The effectiveness of manufacturer vs. retailer rebates within a newsvendor framework  

Science Journals Connector (OSTI)

This paper studies the impact of direct rebates to the end customer from the manufacturer and/or from the retailer upon the profitability and effectiveness of the policies of both channels. Effectiveness is measured by the ratio of the retailers to the manufacturers profits and by the sum of the profits for the two parties across scenarios wherein at least one of the parties offers a rebate. The main result is to prove analytically the conditions under which either all three scenarios are equally profitable or the retailer-only rebate policy is dominant. Another important result is to illustrate the likelihood that the manufacturer is able to coordinate the supply chain, by the appropriate choice of its pricing and rebate policies, thereby inducing the retailer to do likewise with its associated best pricing, ordering and rebate policies. Finally, numerical examples highlight the main features of the paper.

F.J. Arcelus; Satyendra Kumar; G. Srinivasan

2012-01-01T23:59:59.000Z

272

Sustainable Manufacturing via Multi-Scale, Physics-Based Process...  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing-Informed Design, April 2013 Sustainable Manufacturing via Multi-Scale, Physics-Based Process...

273

Request for Information (RFI): Specific Clean Energy Manufacturing...  

Broader source: Energy.gov (indexed) [DOE]

Focus Areas Suitable for a Manufacturing Innovation Institute Request for Information (RFI): Specific Clean Energy Manufacturing Focus Areas Suitable for a Manufacturing...

274

Request for Information (RFI): Clean Energy Manufacturing Topics...  

Broader source: Energy.gov (indexed) [DOE]

Request for Information (RFI): Clean Energy Manufacturing Topics Suitable for a Manufacturing Innovation Institute Request for Information (RFI): Clean Energy Manufacturing Topics...

275

U.S. Advanced Manufacturing and Clean Energy Technology Challenges  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing and Clean Energy Technology Challenges May 6, 2014 AMO Peer Review Mark Johnson Director Advanced Manufacturing Office www.manufacturing.energy.gov This presentation...

276

Private-Public Partnerships for U.S. Advanced Manufacturing  

Broader source: Energy.gov (indexed) [DOE]

Polymer Composite Manufacturing Workshop Crystal City January 13, 2014 Private-Public Partnerships for U.S. Advanced Manufacturing Dr. Frank W. Gayle Advanced Manufacturing...

277

NREL Manufacturing R&D Workshop NREL H2/FC Manufacturing R&D Workshop  

E-Print Network [OSTI]

&D Workshop Fuel Cell Proton Exchange Membrane (PEM) and Solid Oxide Fuel Cell (SOFC) Manufacturing Lines and driving down the cost of fuel cell manufacturing through automation. What are the key technical Membrane Electrode Assembly Manufacturing Hypothetical Fuel Cell Manufacturing Platforms August 11, 2011

278

Optimal Power Flow Based Demand Response Offer Price Optimization  

E-Print Network [OSTI]

Optimal Power Flow Based Demand Response Offer Price Optimization Zhen Qiu 1 Introduction-time energy balance. Demand response programs are offered by the utility companies to reduce the load response cost in exchange for load reduction. A considerable amount of papers have discussed the demand

Lavaei, Javad

279

http://forensicscience.ucdavis.edu Offered by the UC Davis  

E-Print Network [OSTI]

http://forensicscience.ucdavis.edu Offered by the UC Davis Forensic Science Graduate Group in collaboration with UC Davis Extension Master of Science in Forensic Science Take part in this unique master of Science in Forensic Science offers a unique opportunity to obtain a research-based, forensic science

Peisert, Sean

280

Wind energy offers considerable promise; the wind itself is free,  

E-Print Network [OSTI]

Wind energy offers considerable promise; the wind itself is free, wind power is clean. One of these sources, wind energy, offers considerable promise; the wind itself is free, wind power is clean, and it is virtually inexhaustible. In recent years, research on wind energy has accelerated

Langendoen, Koen

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Engineered 2D Ising interactions on a trapped-ion quantum simulator with hundreds of spins  

E-Print Network [OSTI]

The presence of long-range quantum spin correlations underlies a variety of physical phenomena in condensed matter systems, potentially including high-temperature superconductivity. However, many properties of exotic strongly correlated spin systems (e.g., spin liquids) have proved difficult to study, in part because calculations involving N-body entanglement become intractable for as few as N~30 particles. Feynman divined that a quantum simulator - a special-purpose "analog" processor built using quantum particles (qubits) - would be inherently adept at such problems. In the context of quantum magnetism, a number of experiments have demonstrated the feasibility of this approach. However, simulations of quantum magnetism allowing controlled, tunable interactions between spins localized on 2D and 3D lattices of more than a few 10's of qubits have yet to be demonstrated, owing in part to the technical challenge of realizing large-scale qubit arrays. Here we demonstrate a variable-range Ising-type spin-spin interaction J_ij on a naturally occurring 2D triangular crystal lattice of hundreds of spin-1/2 particles (9Be+ ions stored in a Penning trap), a computationally relevant scale more than an order of magnitude larger than existing experiments. We show that a spin-dependent optical dipole force can produce an antiferromagnetic interaction J_ij ~ 1/d_ij^a, where a is tunable over 0

Joseph W. Britton; Brian C. Sawyer; Adam C. Keith; C. -C. Joseph Wang; James K. Freericks; Hermann Uys; Michael J. Biercuk; John. J. Bollinger

2012-04-25T23:59:59.000Z

282

American Wind Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

American Wind Manufacturing American Wind Manufacturing American Wind Manufacturing Addthis 1 of 9 Nordex USA -- a global manufacturer of wind turbines -- delivered and installed turbine components for the Power County Wind Farm, shown here, in Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-05 14:38 2 of 9 Power County Wind Farm - Power County, Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-07 16:16 3 of 9 Power County Wind Farm - Power County, Idaho. Image: Nordex USA, Inc. Date taken: 2012-03-05 17:14 4 of 9 Nordex USA manufacturing facility - Jonesboro, Arkansas. Image: Nordex USA, Inc. Date taken: 2011-05-02 13:55 5 of 9 Nordex USA flagship manufacturing facility in Jonesboro, Arkansas. Image: Nordex USA, Inc. Date taken: 2011-05-02 14:11 6 of 9 Nordex USA flagship manufacturing facility in Jonesboro, Arkansas.

283

Entergy Texas - Residential and Small Commercial Standard Offer Program |  

Broader source: Energy.gov (indexed) [DOE]

Entergy Texas - Residential and Small Commercial Standard Offer Entergy Texas - Residential and Small Commercial Standard Offer Program Entergy Texas - Residential and Small Commercial Standard Offer Program < Back Eligibility Commercial Construction Low-Income Residential Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Commercial Heating & Cooling Cooling Other Ventilation Heat Pumps Appliances & Electronics Water Heating Maximum Rebate Large Projects: 12.5% of total budget; or $237,500 (Residential); $162,500 for Hard-To-Reach A/C and Heat Pump Program: $40,000 Program Info State Texas Program Type Utility Rebate Program Rebate Amount Residential Standard Offer: $250/kW + $0.081/kWh Hard To Reach Standard Offer Program (all measures except CFL): $440/kW +

284

Obama Administration Offers $59 Million in Conditional Loan Guarantees to  

Broader source: Energy.gov (indexed) [DOE]

Obama Administration Offers $59 Million in Conditional Loan Obama Administration Offers $59 Million in Conditional Loan Guarantees to Beacon Power and Nordic Windpower, Inc. Obama Administration Offers $59 Million in Conditional Loan Guarantees to Beacon Power and Nordic Windpower, Inc. July 2, 2009 - 12:00am Addthis WASHINGTON, DC -- Secretary Steven Chu today announced $59 million in conditional loan guarantees from the Department of Energy for Nordic Windpower, USA, and Beacon Power. Nordic Windpower has been offered $16 million to support the expansion of its assembly plant in Pocatello, Idaho, to produce its one megawatt wind turbine. Beacon Power, an energy storage company, has been offered $43 million to support the construction of its 20 megawatt flywheel energy storage plant in Stephentown, New York that will

285

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Molding, Thermoforming & Compounding Molding, Thermoforming & Compounding PDF format (89 kb) The Manufacturing Science & Technology Center helps customers choose the best materials and techniques for their product by providing a variety of conformal coatings, thermoforming, and compounding materials using established or custom designed processes. The department provides consulting services for injection molding and rubber compounding projects. Capabilities: Thermoforming: Processing thermoplastics such as polycarbonate, polymethyl methacrylate, polypropylene polystyrene, and ABS; producing holding trays, protective caps, and custom covers Injection Molding Consultation: Designing your part to be injection molded, helping you choose the best material for your application, and supporting your interface with injection molding companies

286

Techno-economic analysis of hybrid layered manufacturing  

Science Journals Connector (OSTI)

Subtractive manufacturing (CNC machining) has high quality of geometric and material properties but is slow, costly and infeasible in some cases; additive manufacturing Rapid Prototyping (RP) is just the opposite. Total automation and hence speed is achieved in RP by compromising on quality. Hybrid Layered Manufacturing (HLM) developed at IIT Bombay combines the best features of both these approaches. It uses arc welding for building near-net shapes which are finish machined to final dimensions. High speed of HLM surpasses all other processes for tool making by eliminating NC programming and rough machining. The techno-economic viability of HLM process has been proved through a real life case study. Time and cost of tool making using HLM promises to be substantially lower than that of CNC machining and other RP methods. Interestingly, the material cost in HLM was also found to be lower. Synchronisation of this two-step process offers a new accelerated way of building metal tools and dies. HLM can also be used as a cheaper retrofitment to any three or five axis CNC milling machine or machining centre.

K.P. Karunakaran; Vishal Pushpa; Sreenath Babu Akula; S. Suryakumar

2008-01-01T23:59:59.000Z

287

Research Foundation Employee Offer Letter We are pleased to offer you the position of on the payroll of The Research  

E-Print Network [OSTI]

Research Foundation Employee Offer Letter Dear We are pleased to offer you the position of on the payroll of The Research Foundation for SUNY in the office of You will receive additional information: Research Foundation Human Resources & Payroll PO Box 6000, Binghamton, NY, 13902-6000. Ph: 607-777- 4264

Suzuki, Masatsugu

288

Research Foundation Employee Offer Letter We are pleased to offer you the position of with the Research  

E-Print Network [OSTI]

Research Foundation Employee Offer Letter Dear , We are pleased to offer you the position of with the Research Foundation of State University of New York at Binghamton, a private non profit corporation. You United Sincerely, I Accept the Appointment: Signature and Date cc: Research Foundation Personnel

Suzuki, Masatsugu

289

Note: This syllabus may represent a past offering of this course and future course offerings may differ.  

E-Print Network [OSTI]

Note: This syllabus may represent a past offering of this course and future course offerings may to unpack the popular "crowdsourcing" term--revealing its roots in open source principles and outsourcing argumentation around the concept of crowdsourcing/crowd work. #12;Note: This syllabus may represent a past

290

EV Everywhere Batteries Workshop - Materials Processing and Manufactur...  

Broader source: Energy.gov (indexed) [DOE]

Materials Processing and Manufacturing Breakout Session Report EV Everywhere Batteries Workshop - Materials Processing and Manufacturing Breakout Session Report Breakout session...

291

El Paso Electric Company - SCORE Plus Standard Offer Program | Department  

Broader source: Energy.gov (indexed) [DOE]

Company - SCORE Plus Standard Offer Program Company - SCORE Plus Standard Offer Program El Paso Electric Company - SCORE Plus Standard Offer Program < Back Eligibility Commercial Industrial Institutional Local Government Schools State Government Tribal Government Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Program Info Funding Source Texas New Mexico Power Company State New Mexico Program Type Utility Rebate Program Rebate Amount K-12, Higher Education, Cities, and Businesses: $137.50/kW peak demand; $0.035/kWh Provider CLEAResult Consulting, Inc. The El Paso Electric (EPE) SCORE Plus Program is designed to help

292

Vermont Standard Offer for Qualifying SPEED Resources | Department of  

Broader source: Energy.gov (indexed) [DOE]

Vermont Standard Offer for Qualifying SPEED Resources Vermont Standard Offer for Qualifying SPEED Resources Vermont Standard Offer for Qualifying SPEED Resources < Back Eligibility Agricultural Commercial Industrial Savings Category Bioenergy Water Buying & Making Electricity Solar Home Weatherization Wind Maximum Rebate Varies by technology Program Info Start Date 09/30/2009 State Vermont Program Type Performance-Based Incentive Rebate Amount Varies by technology Provider VEPP, Inc. '''''Note: The first RFP for the new competitive award process has passed; applications were accepted through May 1, 2013. See the program web site for information regarding future solicitations. ''''' In May 2009, Vermont enacted legislation requiring all Vermont retail electricity providers to purchase electricity generated by eligible

293

Supply Chain and Blade Manufacturing Considerations in the Global Wind Industry (Presentation)  

SciTech Connect (OSTI)

This briefing provides an overview of supply chain developments in the global wind industry and a detailed assessment of blade manufacturing considerations for U.S. end-markets. The report discusses the international trade flows of wind power equipment, blade manufacturing and logistical costs, and qualitative issues that often influence factory location decisions. To help guide policy and research and development strategy decisions, this report offers a comprehensive perspective of both quantitative and qualitative factors that affect selected supply chain developments in the growing wind power industry.

James, T.; Goodrich, A.

2013-12-01T23:59:59.000Z

294

Advanced Manufacturing Office: MotorMaster+  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MotorMaster+ to MotorMaster+ to someone by E-mail Share Advanced Manufacturing Office: MotorMaster+ on Facebook Tweet about Advanced Manufacturing Office: MotorMaster+ on Twitter Bookmark Advanced Manufacturing Office: MotorMaster+ on Google Bookmark Advanced Manufacturing Office: MotorMaster+ on Delicious Rank Advanced Manufacturing Office: MotorMaster+ on Digg Find More places to share Advanced Manufacturing Office: MotorMaster+ on AddThis.com... MotorMaster+ This photo shows the inner workings of an industrial electric motor with gears. In the lower left hand corner are the words "MotorMaster+" and underneath are the words "Motor-Driven Systems." Download MotorMaster+ now! Version: 4.01.01 Release Date: September 21, 2010 Release Notes Metric Unit Measurements: No

295

Secretary Chu Offers $117 Million Conditional Commitment for Hawaii Wind  

Broader source: Energy.gov (indexed) [DOE]

Offers $117 Million Conditional Commitment for Hawaii Offers $117 Million Conditional Commitment for Hawaii Wind Power Project Secretary Chu Offers $117 Million Conditional Commitment for Hawaii Wind Power Project March 5, 2010 - 12:00am Addthis Washington DC --- U.S. Secretary of Energy Steven Chu today announced that the Department of Energy has offered a conditional commitment on a $117 million loan guarantee to finance the construction and start-up of an innovative 30 megawatt (MW) wind energy project in Kahuku, Hawaii. Kahuku Wind Power, LLC will install twelve 2.5 MW wind turbine generators along with a battery energy storage system for electricity load stability. The loan guarantee is being supported by funds made available from the American Recovery and Reinvestment Act. "This investment will create jobs and cut our dependence on oil, while

296

Residential Energy Efficiency Rebate (Offered by Members of Associated  

Broader source: Energy.gov (indexed) [DOE]

Residential Energy Efficiency Rebate (Offered by Members of Residential Energy Efficiency Rebate (Offered by Members of Associated Electric Cooperative) Residential Energy Efficiency Rebate (Offered by Members of Associated Electric Cooperative) < Back Eligibility Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Heat Pumps Appliances & Electronics Water Heating Program Info State Missouri Program Type Utility Rebate Program Rebate Amount Room AC: $50 Electric Water Heaters: $50 New Ground-Source Heat Pump: up to $750/ton Replacement Ground-Source Heat Pump: $150/ton Air-Source Heat Pump: $150/ton Provider Member Services Specialist Associated Electric Cooperative and many of its associated member cooperatives offer rebates to residential customers who purchase and

297

Residential Energy Efficiency Rebate (Offered by Several Cooperative  

Broader source: Energy.gov (indexed) [DOE]

Residential Energy Efficiency Rebate (Offered by Several Residential Energy Efficiency Rebate (Offered by Several Cooperative Utilities) Residential Energy Efficiency Rebate (Offered by Several Cooperative Utilities) < Back Eligibility Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heat Pumps Appliances & Electronics Water Heating Program Info State Iowa Program Type Utility Rebate Program Rebate Amount Window AC Unit: $50 Electric Water Heaters: $50 New Ground-Source Heat Pump: up to $750/ton Replacement Ground-Source Heat Pump: $150/ton Air Source Heat Pump: $150/ton Provider Associated Electric Cooperative Associated Electric Cooperative and many of its member cooperatives offer rebates to residential customers who purchase and install energy efficient equipment for the home. Eligible equipment includes room air conditioners,

298

Smart Meters Offer 'Instant Gratification;' Help Houston Homeowners  

Broader source: Energy.gov (indexed) [DOE]

Meters Offer 'Instant Gratification;' Help Houston Meters Offer 'Instant Gratification;' Help Houston Homeowners Save Smart Meters Offer 'Instant Gratification;' Help Houston Homeowners Save July 1, 2011 - 12:15pm Addthis Houston resident Ruth Diorio explains to KPRC Local 2 News how much she's saved with her recently installed smart meter, which allows her to see her savings in real time. Houston resident Ruth Diorio explains to KPRC Local 2 News how much she's saved with her recently installed smart meter, which allows her to see her savings in real time. Liisa O'Neill Liisa O'Neill Former New Media Specialist, Office of Public Affairs What does this mean for me? Smart meters offer real time information on your energy use, which can help you lower your electricity bill. "Instant gratification" from a smart meter? So raves Houston homeowner Ruth

299

Residential Energy Efficiency Rebate (Offered by Several Cooperative  

Broader source: Energy.gov (indexed) [DOE]

Residential Energy Efficiency Rebate (Offered by Several Residential Energy Efficiency Rebate (Offered by Several Cooperative Utilities) Residential Energy Efficiency Rebate (Offered by Several Cooperative Utilities) < Back Eligibility Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heat Pumps Appliances & Electronics Water Heating Cooling Program Info State Oklahoma Program Type Utility Rebate Program Rebate Amount Room A/C Unit: $50 Electric Water Heaters: $50 - $200 New Geothermal Heat Pump: up to $750/ton Replacement Geothermal Heat Pump: $150/ton Air-Source Heat Pump: $150/ton Provider Associated Electric Cooperative Associated Electric Cooperative and many of its member cooperatives offer rebates to residential customers who purchase and install energy efficient equipment for the home. Eligible equipment includes room air conditioners,

300

PPPL Offers Twice-Monthly Public Tours | Princeton Plasma Physics...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Primary tabs View(active tab) High Resolution News PPPL Offers Twice-Monthly Public Tours By Jeanne Jackson DeVoe October 6, 2014 Tweet Widget Google Plus One Share on Facebook...

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

PPPL Offers Twice-Monthly Public Tours | Princeton Plasma Physics...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Primary tabs View(active tab) High Resolution Press Releases PPPL Offers Twice-Monthly Public Tours By Jeanne Jackson DeVoe October 6, 2014 Tweet Widget Google Plus One Share on...

302

We offer a full range of surgical expertise. Bariatric Surgery  

E-Print Network [OSTI]

CARE MARS Medical Access and Referral System 800-WVA-MARS 800-982-6277 24-hour, 7-day per week are a major tertiary referral center for the region and state, offering the highest level of clinical

Mohaghegh, Shahab

303

Xcel Energy- Commercial and Industrial Standard Offer Program  

Broader source: Energy.gov [DOE]

Xcel Energy Large Commercial and Industrial Standard Offer Program (SOP) pays incentives to businesses for retrofit and new construction projects that save energy in peak summer demand periods and...

304

Marines Offer Rapid Response To Chemical/Biological Terrorism  

Science Journals Connector (OSTI)

Marines Offer Rapid Response To Chemical/Biological Terrorism ... ? Newly formed unit will likely be on-site to work with other agencies in event of terrorist attack during Atlanta Olympic games ...

LOIS R. EMBER

1996-07-01T23:59:59.000Z

305

Energy Department Offers Funding to Improve the Electric Grid  

Broader source: Energy.gov [DOE]

The Energy Department is offering up to $7 million in funding to advance the design of technologies that will help communities become more adaptive and prepared for power outages caused by severe weather and other events.

306

BEST OFFER EVER ACCELERATED TEXAS UPGRADES | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of Reported Data Data Dashboard Stories & Case Studies "Homeowners Go Deeper in the Heart of Texas and Save With Austin Energy" Best Offer Ever Produces Upgrades in Record Time...

307

Shoulder injury reduction with post-offer testing  

E-Print Network [OSTI]

Objective: This study is an interventional evaluation of a post-offer employment testing. The study is designed to determine if shoulder injury rates are lowered when employees are placed at jobs they demonstrate the ...

Harbina, Gary L.; Shenoy, Catherine; Garcia, Amy; Olson, John C.

2011-06-21T23:59:59.000Z

308

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sol-Gel Glasses Sol-Gel Glasses PDF format (74 kb) Sol Gel Sol Gel Coating with Sol-Gel Glasses Coating with Sol-Gel Glasses The Manufacturing Science & Technology Center conducts process development and scale-up of ceramic and glass materials prepared by the sol-gel process. Sol-gel processing uses solutions prepared at low temperature rather than high temperature powder processing to make materials with controlled properties. A precursor sol-gel solution (sol) is either poured into a mold and allowed to gel or is diluted and applied to a substrate by spinning, dipping, spraying, electrophoresis, inkjet printing or roll coating. Controlled drying of the wet gel results in either a ceramic or glass bulk part or a thin film on a glass, plastic, ceramic or metal substrate.

309

High Pressure Hydrogen Tank Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Workshop Workshop High Pressure Hydrogen Tank Manufacturing Mark Leavitt Quantum Fuel Systems Technologies Worldwide, Inc. August 11, 2011 This presentation does not contain any proprietary, confidential, or otherwise restricted information History of Innovations... Announced breakthrough in all-composite lightweight, high capacity, low-cost fuel storage technologies. * Developed a series of robust, OEM compatible electronic control products. Developed H 2 storage system for SunLine Tran-sit Hythane® bus. Awarded patent for integrated module including in-tank regulator * Developed high efficiency H 2 fuel storage systems for DOE Future Truck programs Developed H 2 storage and metering system for Toyota's FCEV platform. First to certify 10,000 psi systems in Japan

310

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electro Microfluidic Dual In-line Package (EMDIP) Electro Microfluidic Dual In-line Package (EMDIP) PDF format (115 kb) EMDIP diagram EMDIP Diagram Microfluidics is experiencing explosive growth in new product developments. Already there are many commercial applications for electro microfluidic devices such as chemical sensors, biological sensors, and drop ejectors for both printing and chemical analysis. The number of surface micromachined microfluidic devices is likely to increase. Manufacturing efficiency and integration of microfluidics with electronics will become important. In order to realize applications for these devices, an efficient method for packaging microfluidic devices is needed. Responding to this need, researchers at Sandia developed the Electro Microfluidic Dual In-Line Package (EMDIP) and the Fluidic Printed Wiring Board (FPWB).

311

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

A24. A24. Total Inputs of Energy for Heat, Power, and Electricity Generation by Program Sponsorship, Industry Group, Selected Industries, and Type of Energy- Management Program, 1994: Part 1 (Estimates in Trillion Btu) See footnotes at end of table. Energy Information Administration/Manufacturing Consumption of Energy 1994 285 SIC Management Any Type of Sponsored Self-Sponsored Sponsored Sponsored Code Industry Group and Industry Program Sponsorship Involvement Involvement Involvement Involvement a No Energy Electric Utility Government Third Party Type of Sponsorship of Management Programs (1992 through 1994) RSE Row Factors Federal, State, or Local RSE Column Factors: 0.7 1.1 1.0 0.7 1.9 0.9 20-39 ALL INDUSTRY GROUPS Participation in One or More of the Following Types of Programs . .

312

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

A9. A9. Total Inputs of Energy for Heat, Power, and Electricity Generation by Fuel Type, Census Region, and End Use, 1994: Part 1 (Estimates in Btu or Physical Units) See footnotes at end of table. Energy Information Administration/Manufacturing Consumption of Energy 1994 166 End-Use Categories (trillion Btu) kWh) (1000 bbl) (1000 bbl) cu ft) (1000 bbl) tons) (trillion Btu) Total (million Fuel Oil Diesel Fuel (billion LPG (1000 short Other Net Distillate Natural and Electricity Residual Fuel Oil and Gas Breeze) a b c Coal (excluding Coal Coke d RSE Row Factors Total United States RSE Column Factors: NF 0.5 1.3 1.4 0.8 1.2 1.2 NF TOTAL INPUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16,515 778,335 70,111 26,107 5,962 25,949 54,143 5,828 2.7 Indirect Uses-Boiler Fuel . . . . . . . . . . . . . . . . . . . . . . . --

313

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Welding, Fabrication, & Metal Forming Welding, Fabrication, & Metal Forming PDF format (159 kb) The department consists of three trades: welding; fabrication and assembly; and precision metal forming. These interrelated groups use similar equipment and rely on each other's skills. One stop will get you the service of three reliable trades. The team manufactures and assembles prototype hardware and has the in-house capability of producing hardware with sizes ranging from thumbnail to rail-car. Expertise includes aircraft quality sheet metal construction, certified welding, and assembly. The staff has experience managing a variety of activities: design modification assistance; in-house fabrication; and project management and can work with your engineers to transform sketches and ideas into working prototypes.

314

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

3 3 Energy Information Administration/Manufacturing Consumption of Energy 1994 Glossary Anthracite: A hard, black, lustrous coal containing a high percentage of fixed carbon and a low percentage of volatile matter. Often referred to as hard coal. Barrel: A volumetric unit of measure equivalent to 42 U.S. gallons. Biomass: Organic nonfossil material of biological origin constituting a renewable energy source. Bituminous Coal: A dense, black coal, often with well-defined bands of bright and dull material, with a moisture content usually less than 20 percent. Often referred to as soft coal. It is the most common coal. Blast Furnace: A shaft furnace in which solid fuel (coke) is burned with an air blast to smelt ore in a continuous operation. Blast Furnace Gas: The waste combustible gas generated in a blast furnace when iron ore is being reduced with coke to

315

Wind Turbine Manufacturing Process Monitoring  

SciTech Connect (OSTI)

To develop a practical inline inspection that could be used in combination with automated composite material placement equipment to economically manufacture high performance and reliable carbon composite wind turbine blade spar caps. The approach technical feasibility and cost benefit will be assessed to provide a solid basis for further development and implementation in the wind turbine industry. The program is focused on the following technology development: (1) Develop in-line monitoring methods, using optical metrology and ultrasound inspection, and perform a demonstration in the lab. This includes development of the approach and performing appropriate demonstration in the lab; (2) Develop methods to predict composite strength reduction due to defects; and (3) Develop process models to predict defects from leading indicators found in the uncured composites.

Waseem Faidi; Chris Nafis; Shatil Sinha; Chandra Yerramalli; Anthony Waas; Suresh Advani; John Gangloff; Pavel Simacek

2012-04-26T23:59:59.000Z

316

Manufacturing Consumption of Energy 1994  

U.S. Energy Information Administration (EIA) Indexed Site

0. 0. Number of Establishments that Actually Switched Fuels from Natural Gas to Residual Fuel Oil, by Industry Group and Selected Industries, 1994 369 Energy Information Administration/Manufacturing Consumption of Energy 1994 SIC Residual Fuel Oil Total Code Industry Group and Industry (billion cu ft) Factors (counts) (counts) (percents) (counts) (percents) a Natural Gas Switchable to Establishments RSE Row Able to Switch Actually Switched RSE Column Factors: 1.3 0.1 1.4 1.7 1.6 1.8 20 Food and Kindred Products . . . . . . . . . . . . . . . . . . . . . . . . . 81 14,698 702 4.8 262 1.8 5.6 2011 Meat Packing Plants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 759 23 3.0 10 1.3 9.0 2033 Canned Fruits and Vegetables . . . . . . . . . . . . . . . . . . . . . 9 531 112 21.2 33 6.2 11.6 2037 Frozen Fruits and Vegetables . . . . . . . . . . . . . . . . . . . . . . 5 232 Q 5.3

317

Two hundred years after a commercial marine turtle shery: the current status of marine turtles nesting in the Cayman Islands  

E-Print Network [OSTI]

Two hundred years after a commercial marine turtle ®shery: the current status of marine turtles, Gina Ebanks-Petrie and Graeme C. Hays Abstract Large populations of marine turtles breed- ing in the Cayman Islands were drastically reduced in the early 1800s. However, marine turtle nesting still occurs

Exeter, University of

318

Clean Energy Manufacturing Resources - Technology Feasibility | Department  

Broader source: Energy.gov (indexed) [DOE]

Feasibility Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Find resources to help you evaluate the feasibility of your idea for a new clean energy technology or product. For determining feasibility, areas to consider include U.S. Department of Energy (DOE) priorities, licensing, R&D funding, and strategic project partnerships. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Learn About U.S. Department of Energy Priorities Advanced Manufacturing Office Plans - features information on analysis, plan implementations, and commercial outcomes. Bioenergy Technologies Office Plans - includes technology roadmaps, multiyear program plans, analysis, and more.

319

Advanced Manufacturing Jobs and Innovation Accelerator Challenge |  

Broader source: Energy.gov (indexed) [DOE]

Technical Assistance » Advanced Manufacturing Jobs and Innovation Technical Assistance » Advanced Manufacturing Jobs and Innovation Accelerator Challenge Advanced Manufacturing Jobs and Innovation Accelerator Challenge October 10, 2013 - 12:01pm Addthis The Advanced Manufacturing Jobs and Innovation Accelerator Challenge (Accelerator) is a multi-agency sponsored competition established to enhance existing regional networks of firms and institutions that accelerate technology-related innovation, business formation, and job creation. Funding provided to these regional networks (also called clusters) help academia, utilities, local governments, and private industry and investors expand partnerships, share strategic information more efficiently, and reduce costs by leveraging existing assets and resources (like physical facilities and equipment).

320

Solutia: Massachusetts Chemical Manufacturer Uses SECURE Methodology...  

Broader source: Energy.gov (indexed) [DOE]

SECURE Methodology to Identify Potential Reductions in Utility and Process Energy Consumption Solutia: Massachusetts Chemical Manufacturer Uses SECURE Methodology to Identify...

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Moving towards green and sustainable manufacturing  

Science Journals Connector (OSTI)

The pressing needs of energy, water and other resource conservation worldwide is ... a major engineering challenge. In manufacturing, developing green technologies (from process and tooling to the ... manufacturi...

David Alan Dornfeld

2014-01-01T23:59:59.000Z

322

Oak Ridge Centers for Manufacturing Technology - Partnership...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in result from Jack Cook making contacts with some of the people who experienced the Oak Ridge Centers for Manufacturing Technology firsthand. Here is his introduction...

323

Oak Ridge National Laboratory Manufacturing Demonstration Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Oak Ridge National Laboratory Manufacturing Demonstration Facility Technology Collaborations | Proposal Guidelines Proposal Guidelines Proposals should be no more than 5 single...

324

Oak Ridge Centers for Manufacturing Technology ? testimonials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

testimonials The first testimonial for the successful Oak Ridge Centers for Manufacturing Technology came from Mitchell Burnett. Mitch was among the first hourly paid employees, an...

325

Fiber Reinforced Polymer Composite Manufacturing Workshop  

Office of Energy Efficiency and Renewable Energy (EERE)

A workshop on Fiber Reinforced Polymer (FRP) Composite Manufacturing (held January 13, 2014, in Arlington, VA) brought together stakeholders from industry and academia to discuss manufacturing of composites. The workshop explored emerging FRP composite market applications in clean energy and barriers to the development and widespread commercial use of these lightweight, high-strength and high-stiffness materials. Improving the manufacturing speed and quality-and reducing their manufacturing costs-could accelerate their use in automotive, wind, compressed gas storage and other clean energy and industrial applications.

326

Manufacturing Success Stories | Department of Energy  

Office of Environmental Management (EM)

Colorado State University Industrial Assessment Center Saves Manufacturers Money and Trains the Next Generation of Engineers Assessment center has helped Colorado companies save...

327

Federal Energy and Manufacturing Workforce Training Programs...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

manufacturing related workforce training programs. Funded by the National Science Foundation, the Department of Labor and the Department of Energy these programs provide...

328

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

Precision Manufacturing, LCA, Machining, SustainabilityNOMENCLATURE API = CMOS = GWP = LCA = LCI = Mfg = MRR = RoHSLife Cycle Assessment (LCA). The following sections will

Linke, Barbara; Dornfeld, David; Huang, Yu-Chu

2011-01-01T23:59:59.000Z

329

Industrial Scale Demonstration of Smart Manufacturing Achieving...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

TX National Center for Manufacturing Sciences Ann Arbor, MI Nimbis Services McLean, VA Praxair Tonawanda, NY Rockwell Automation Milwaukee, WI For additional information, please...

330

Agenda: Fiber Reinforced Polymer Composite Manufacturing Workshop  

Broader source: Energy.gov (indexed) [DOE]

Blue Team B (Washington II & III) - Manufacturing Process Technology Facilitators - Kelly Visconti and Steve Sikirica; Note taker - Theresa Miller Red Team (Madison Room) -...

331

Advanced Manufacturing Office (Formerly Industrial Technologies Program)  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

332

PRESENTATION: BRIEFING ON CLEAN ENERGY MANUFACTURING  

Broader source: Energy.gov [DOE]

A briefing to the Secretary's Energy Advisory Board on the clean energy manufacturing delivered by David Danielson, Assistant Secretary for Energy Efficiency and Renewable Energy.

333

National Network for Manufacturing Innovation: A Preliminary...  

Energy Savers [EERE]

capabilities from all the partners to build the proving grounds where innovations flourish and to help advance American domestic manufacturing. nstcnnmiprelimdesignfinal.pdf...

334

Composite Tube Trailer Design/Manufacturing Needs  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

335

Manufacturing Barriers to High Temperature PEM Commercialization  

Broader source: Energy.gov [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011.

336

Supplemental Comments of the Plumbing Manufacturers Instititute...  

Broader source: Energy.gov (indexed) [DOE]

Supplemental Comments of the Plumbing Manufacturers Instititute Regarding the Economic Impacts of the Proposed Definition of "Showerhead," Docket No. EERE-2010-BT-NOA-0016...

337

American Energy and Manufacturing Competitiveness Summit  

Broader source: Energy.gov [DOE]

The American Energy and Manufacturing Competitiveness Summit will bring together leaders and perspectives from industry, government, academia, national laboratories, labor, and policy organizations...

338

Laser and Intelligent Energy Field Manufacturing  

Science Journals Connector (OSTI)

Laser has demonstrated many important applications, including machining, welding, surface treating, additive manufacturing etc. Multiple hybrid processes had been developed, including...

Zhang, Wenwu

339

Fiber Reinforced Polymer Composite Manufacturing Workshop: Summary...  

Energy Savers [EERE]

for carbon fiber, including bio-based materials or natural gas; lower energy conversion of white fiber to carbon fiber; and composite manufacturing. Dr. Johnson then...

340

Manufacturing Ecosystems and Keystone Technologies (Text Version)  

Broader source: Energy.gov [DOE]

This is a text version of the Manufacturing Ecosystems and Keystone Technologies video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Additive Manufacturing: Current Status and Future Prospects  

Science Journals Connector (OSTI)

The potential implications of additive manufacturing or 3D printing technology are being recognized across a number ... wider adoption of and greater business value from 3D printing.

Jyotirmoyee Bhattacharjya; Sonali Tripathi

2014-01-01T23:59:59.000Z

342

Solar Manufacturing Incentive Grant (SMIG) Program  

Broader source: Energy.gov [DOE]

Created in 1995 and administered jointly by the Virginia Department of Mines, Minerals and Energy, and the Virginia Economic Development Partnership, the Solar Manufacturing Incentive Grant (SMIG)...

343

Green Manufacturing Initiative Annual Report 2010  

E-Print Network [OSTI]

Green Manufacturing Initiative Annual Report 2010 Dr. John Patten Dr. David Meade May 3, 2011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Herman Miller Energy Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

de Doncker, Elise

344

Low Energy Ion Implantationin Semiconductor Manufacturing | U...  

Office of Science (SC) Website

Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science...

345

2014 Manufacturing Energy and Carbon Footprints: Definitions...  

Broader source: Energy.gov (indexed) [DOE]

and Assumptions A number of key terms are used to interpret the manufacturing energy and carbon footprints. The terms associated with the energy footprint analysis are...

346

Advanced Materials and Manufacturing | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and characterization of ceramic materials for energy-related applications Process Development and Scale-up Program Argonne's Materials Synthesis and Manufacturing Research and...

347

Manufacturer-To-Retailer versus Manufacturer-To-Consumer Rebates in a Supply Chain  

Science Journals Connector (OSTI)

Starting with a newsvendor model (single-product, single-period, stochastic demand), we build a single-retailer, single-manufacturer supply chain with endogenous manufacturer rebates and retail pricing. The deman...

Goker Aydin; Evan L. Porteus

2009-01-01T23:59:59.000Z

348

Simultaneous Tolerance Synthesis for Manufacturing and Quality B. Ye, Department of Industrial and Manufacturing Systems Engineering  

E-Print Network [OSTI]

Simultaneous Tolerance Synthesis for Manufacturing and Quality B. Ye, Department of Industrial and Manufacturing Systems Engineering University of Windsor F.A. Salustri, Department of Mechanical, Aerospace, and Industrial Engineering, Ryerson University To appear, Research in Engineering Design, Springer

Salustri, Filippo A.

349

Modeling of additive manufacturing process relevant feature in layer based manufacturing process planning  

Science Journals Connector (OSTI)

Compared with general machining processes, additive manufacturing (AM) process has stabler planning route ... approach is applied to the process planning of additive manufacturing in this paper. The concept of ....

Xi-juan Liu ???

2012-04-01T23:59:59.000Z

350

A Vehicle Manufacturers Perspective on Higher-Octane Fuels  

Broader source: Energy.gov [DOE]

Breakout Session 1CFostering Technology Adoption I: Building the Market for Renewables with High Octane Fuels A Vehicle Manufacturers Perspective on Higher-Octane Fuels Tom Leone, Technical Expert, Powertrain Evaluation and Analysis, Ford Motor Company

351

Manufacturer-to-Retailer versus Manufacturer-to-Consumer Rebates in a Supply Chain  

E-Print Network [OSTI]

Manufacturer-to-Retailer versus Manufacturer-to-Consumer Rebates in a Supply Chain Goker Aydin rebates and retail pricing. The demand uncertainty is multiplicative, and the expected demand depends on the effective (retail) price of the product. A retailer rebate goes from the manufacturer to the retailer

Aydin, Goker

352

Watfactory Virtual Manufacturing Process Varying Inputs  

E-Print Network [OSTI]

with the virtual process: · Allows quick exploration (i.e. during a short course) of process improvement ideasWatfactory Virtual Manufacturing Process Machine 1 Machine 2 Machine 3 Stream 1 Machine B Stream 2 Inputs Can be Set by Stream z19, ..., z24 The Watfactory virtual process simulates a manufacturing

Zhu, Mu

353

Biologically inspired mutual synchronization of manufacturing machines  

E-Print Network [OSTI]

Biologically inspired mutual synchronization of manufacturing machines Erjen Lefeber,a,1 , Herman machine is developed. This control system is based on a synchronization mechanism of enzymes replacing of a single turnover cycle. In manufacturing, batch machines serve several jobs simultaneously, e.g., heat

Armbruster, Dieter

354

A Global Assessment of Manufacturing: Economic  

E-Print Network [OSTI]

A Global Assessment of Manufacturing: Economic Development, Energy Use, Carbon Emissions Keywords production, materials, closed loop, China, emerging economies Abstract We present in two parts an assessment of global manufacturing. In the first part, we review economic development, pollution, and carbon

Gutowski, Timothy

355

Evaluating Energy Efficiency Improvements in Manufacturing Processes  

E-Print Network [OSTI]

and increasing awareness of "green" customers have brought energy efficient manufacturing on top of the agendaEvaluating Energy Efficiency Improvements in Manufacturing Processes Katharina Bunse1 , Julia Sachs kbunse@ethz.ch, sachsj@student.ethz.ch, mvodicka@ethz.ch Abstract. Global warming, rising energy prices

Boyer, Edmond

356

Simulation Model Driven Engineering for Manufacturing Cell  

E-Print Network [OSTI]

Simulation Model Driven Engineering for Manufacturing Cell Hironori Hibino1 , Toshihiro Inukai2 Abstract. In our research, the simulation model driven engineering for manufacturing cell (SMDE on the simulation model and to extend the range of control applications and simulation applications using the PC

Paris-Sud XI, Université de

357

Low Temperature PEM Fuel Cell Manufacturing Needs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PEM Fuel Cell PEM Fuel Cell Manufacturing Needs Presented by Duarte Sousa, PE Manufacturing Fuel Cell Manhattan Project  Cost drivers were identified for the following: * MEA * Plates * Balance of Plant (BOP) * Fuel Processing Manufacturing Fuel Cell Project - Phase 1 Note that this presentation will be MEA centric as this is the working group I represent...  MEA Cost Drivers Identified: Identifying MEA Cost Drivers * The MEA was readily identified as the major cost driver in a 10 kW stationary stack. * The precious metal catalyst electrode is the major cost driver for the MEA. Thus, focus cost reduction efforts on MEA manufacturing methods. Identify gaps in MEA manufacturing technology: How much better can we do? Note: Cost reductions realized from both material price reduction

358

Manufacturing News and Blog | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing News and Blog Manufacturing News and Blog Manufacturing News and Blog Blog Next-Generation Power Electronics: Reducing Energy Waste and Powering the Future January 15, 2014 3:53 PM From unleashing more powerful and energy-efficient laptops, cell phones and motors, to shrinking utility-scale inverters from 8,000 pound substations to the size of a suitcase, wide bandgap semiconductors could be one of the keys to our clean energy future. Read The Full Story Manufacturing Spotlight: Boosting American Competitiveness January 6, 2014 1:06 PM Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient. Read The Full Story Secretary Moniz Joins President Obama in Visit to Cleveland High-Strength Steel Factory

359

Clean Energy Manufacturing Resources - Technology Prototyping | Department  

Broader source: Energy.gov (indexed) [DOE]

Guide Home » Clean Energy Manufacturing Resources - Technology Guide Home » Clean Energy Manufacturing Resources - Technology Prototyping Clean Energy Manufacturing Resources - Technology Prototyping Clean Energy Manufacturing Resources - Technology Prototyping Find resources to help you design and refine a prototype of a new clean energy technology or product. For prototyping, areas to consider include materials characterization; models and tools; intellectual property protection; small-scale production; R&D funding; and regional, state, and local resources. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Characterize Materials Shared Research Equipment User Facility - a facility at Oak Ridge National Laboratory that provides access to advanced instruments and scientists for the scale characterization of materials.

360

Summit Manufacturing: Noncompliance Determination (2010-SE-0303) |  

Broader source: Energy.gov (indexed) [DOE]

Summit Manufacturing: Noncompliance Determination (2010-SE-0303) Summit Manufacturing: Noncompliance Determination (2010-SE-0303) Summit Manufacturing: Noncompliance Determination (2010-SE-0303) May 28, 2010 DOE issued a Notice of Noncompliance Determination to Summit Manufacturing, Inc. finding that 4SHP13LE136P + 15001+CA042A964+TDR basic model, a split-system air conditioning heat pump with a heat pump coil, does not comport with the energy conservation standards. DOE determined the product was noncompliant based on the company's own testing. Summit must immediately notify each person (or company) to whom Summit distributed the noncompliant products that the product does not meet Federal standards. In addition, Summit must provide to DOE documents and records showing the number of units Summit distributed and to whom. The manufacturer and/or

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Revitalizing American Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Revitalizing American Manufacturing Revitalizing American Manufacturing Revitalizing American Manufacturing September 13, 2010 - 5:30pm Addthis A123 Systems' President David Vieau speaks with Energy Secretary Steven Chu and Michigan Governor Jennifer Granholm at the opening of their Livonia, MI plant. The plant will develop and manufacture advanced batteries systems for electric vehicles. | Department of Energy Photo | A123 Systems' President David Vieau speaks with Energy Secretary Steven Chu and Michigan Governor Jennifer Granholm at the opening of their Livonia, MI plant. The plant will develop and manufacture advanced batteries systems for electric vehicles. | Department of Energy Photo | Secretary Chu Secretary Chu Former Secretary of Energy "The Department of Energy has long been charged with accelerating energy

362

FACTSHEET: Next Generation Power Electronics Manufacturing Innovation  

Broader source: Energy.gov (indexed) [DOE]

FACTSHEET: Next Generation Power Electronics Manufacturing FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute FACTSHEET: Next Generation Power Electronics Manufacturing Innovation Institute January 15, 2014 - 9:20am Addthis The Obama Administration today announces the selection of North Carolina State University to lead a public-private manufacturing innovation institute for next generation power electronics. Supported by a $70 million Energy Department investment over five years as well as a matching $70 million in non-federal cost-share, the institute will bring together over 25 companies, universities and state and federal organizations to invent and manufacture wide bandgap (WBG) semiconductor-based power electronics that are cost-competitive and 10 times more powerful than current

363

Logistics implications of electric car manufacturing  

Science Journals Connector (OSTI)

The increasingly important role of electric cars manufacturing needs to develop new logistics concepts in automotive industry. This article analyses critical issues in logistics operations of electric cars based on the in-house perspective of the car manufacturer. The purpose of this paper is two-fold. Firstly, to verify existing research about the impact of electric car manufacturing on logistics operations. Secondly, to investigate concrete logistics implications based on different electric car operations models. Therefore, we use manufacturing phenotypes, which can be applied to separate and classify configuration and coordination principles and helps to reach a better understanding of relationships with their logistics implications. The presented model is based on real case study data of global auto industry and supports the academic study of cross-site comparisons. A holistic and consistent understanding of different operations types in electric car manufacturing will be necessary, which will help in evaluating the actual and future supply chain forms in the car industry.

Florian Klug

2014-01-01T23:59:59.000Z

364

Manufacturing Innovation Multi-Topic Workshop  

Broader source: Energy.gov [DOE]

DOEs Advanced Manufacturing Office (AMO) and the Office of Secretary of Defense Manufacturing Technology Program (OSD ManTech) held a joint workshop October 8 and 9, 2014 in Fort Worth, TX. This workshop identified mid-Technology Readiness Level (TRL) research and development (R&D) needs, market and supply chain challenges, and shared facility needs for advanced manufacturing. The workshop complemented a recently released AMO Request for Information (RFI) and a recently amended OSD ManTech RFI. AMO and OSD ManTech sought to know more about the challenges associated with advanced manufacturing technology that potentially could be overcome by pre-competitive collaboration as part of a Manufacturing Innovation Institute.

365

A measurement infrastructure for sustainable manufacturing  

Science Journals Connector (OSTI)

Global resource degradation, climate change, and environmental pollution are worsening due to increasing globalised industrialisation. Manufacturing industries have thus been put under pressure to cope with these problems while maintaining competitiveness. Sustainable manufacturing has been proposed to meet these challenges. The measurement of sustainability in manufacturing enables the quantitative measure of sustainability performance in specific manufacturing processes that will support decision-making for more sustainable processes and products. This paper describes a proposed sustainable manufacturing measurement infrastructure. The centre piece of this infrastructure is a sustainability performance management component that will effectively manage a sustainable indicator repository, measurement process guidelines, and sustainability performance analysis, evaluation, and reporting. The sustainability measurement infrastructure provides a foundation for decision-making tools development and enables users to create a tight integration into business strategy development processes. Examples in this paper are on carbon emissions and energy consumption.

Shaw C. Feng; Che B. Joung

2011-01-01T23:59:59.000Z

366

EI Summary of All Manufacturing SIC  

U.S. Energy Information Administration (EIA) Indexed Site

All (20-39) Food (20) Textiles (22) Apparel (23) Lumber (24) Furniture (25) Paper (26) Printing (27) Chemicals (28) Refineries (29) Rubber (30) Stone, Clay & Glass(32) Primary Metals (33) Fabricated Metals (34) Machinery (35) Electronic Equipment (36) Instruments (38) Miscellaneous Manufacturing (39) All (20-39) Food (20) Textiles (22) Apparel (23) Lumber (24) Furniture (25) Paper (26) Printing (27) Chemicals (28) Refineries (29) Rubber (30) Stone, Clay & Glass(32) Primary Metals (33) Fabricated Metals (34) Machinery (35) Electronic Equipment (36) Instruments (38) Miscellaneous Manufacturing (39) The manufacturing sector includes establishments engaged in the mechanical or chemical transformation of materials or substances into new products. These operations are generally conducted in facilities described as plants, factories, or mills, while characteristically using power-driven machines and material-handling equipment. Manufacturing also includes such activities as the assembly of components of manufactured products and the blending of materials, such as lubricating oil, plastics, resins, or liquors.

367

Energy-Related Carbon Emissions in Manufacturing  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Energy-Related Carbon Emissions Energy Energy-Related Carbon Emissions Detailed Energy-Related Carbon Emissions All Industry Groups 1994 emissions Selected Industries Petroleum refining Chemicals Iron & Steel Paper Food Stone, clay and glass Methodological Details Estimation methods Glossary Return to: Energy and GHG Analysis Efficiency Page Energy Use in Manufacturing Energy-Related Carbon Emissions in Manufacturing Manufacturing, which accounts for about 80 percent of industrial energy consumption, also accounts for about 80 percent of industrial energy-related carbon emissions. (Agriculture, mining, forestry, and fisheries account for the remaining 20 percent.) In 1994, three industries, petroleum, chemicals, and primary metals, emitted almost 60 percent of the energy-related carbon in manufacturing. The next three largest emitters (paper, food, and the stone, glass, and clay products industry) produced an additional 22 percent of the energy-related manufacturing emissions (Figure 1).

368

Biodiesel Offers a Renewable Alternative | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Biodiesel Offers a Renewable Alternative Biodiesel Offers a Renewable Alternative Biodiesel Offers a Renewable Alternative September 13, 2010 - 7:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program A few weeks ago, I visited the Montgomery County Agricultural Fair in Maryland, eager to view cute barnyard animals and eat fried food. Among the flashing lights and noisy crowd, a colorful sign caught my eye. I was surprised and pleased by its message: all of the thrill rides were running on biodiesel. As a result, the ride's engines were producing fewer emissions and using less petroleum than they would using normal diesel fuel. As Clean Cities, the area I focus on in the Department of Energy's Vehicle Technologies Program, works to promote alternative transportation fuels including biodiesel, I was happy to see a community event using it.

369

Experts Offer Marines Energy-Efficiency Advice | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Experts Offer Marines Energy-Efficiency Advice Experts Offer Marines Energy-Efficiency Advice Experts Offer Marines Energy-Efficiency Advice December 11, 2009 - 2:05pm Addthis Dr. John Barnett consulted for the military on saving energy in theater. | Photo courtesy NREL Dr. John Barnett consulted for the military on saving energy in theater. | Photo courtesy NREL Joshua DeLung As an early adopter of cutting-edge technologies, the United States military is pioneering energy efficiency and renewable energy technologies in the field. Recently, the Commandant of the United States Marine Corps sent a team to visit bases and camps in Afghanistan to assess and make recommendations on the supply and use of energy and water. If implemented, the findings will reduce demand for resources at military camps in strategically important areas of the country, translating to fewer trucks

370

Best Practices for Utility Incentive Programs - Best Offer Ever  

Broader source: Energy.gov (indexed) [DOE]

March 2012 March 2012 1 Austin's Energy Leadership Best Practices for Utility Incentive Programs - Best Offer Ever Karl R. Rábago Distributed Energy Services Austin Energy February 2012 20 March 2012 2 Society Economy Environment Austin Energy's Mission Statement 20 March 2012 3 Clean Energy for Everyone, Today and Tomorrow. 20 March 2012 4 20 March 2012 5 5 20 March 2012 Best Offer Ever * Austin Energy rebates * Texas Gas Service rebates (if applicable) * Federal tax credits * 0% loan financing Average customer cost $9,000 Austin Energy rebates - $1,400 Amount financed with 0% loan $7,600 Texas Gas Service rebate - $300 Cost after all rebates $7,300 Federal tax credit - $1,500 Customer net cost $5,800 20 March 2012 6 6 20 March 2012 Best Offer Ever Raised Issues in Several

371

Department of Energy Offers $2 Billion in Conditional Loan Guarantee  

Broader source: Energy.gov (indexed) [DOE]

Billion in Conditional Loan Billion in Conditional Loan Guarantee Commitments for Two California Concentrating Solar Power Plants Department of Energy Offers $2 Billion in Conditional Loan Guarantee Commitments for Two California Concentrating Solar Power Plants June 14, 2011 - 12:00am Addthis Washington D.C. --- U.S. Energy Secretary Steven Chu today announced the offer of conditional commitments to provide loan guarantees to support two concentrating solar power (CSP) projects - the Mojave Solar Project (MSP) in San Bernardino County, California, and the Genesis Solar Project, located on land managed by the Bureau of Land Management in Riverside County, California. The Department is offering a conditional commitment for a $1.2 billion loan guarantee to support the Mojave Solar Project and a

372

Secretaries Chu and Salazar Lead Administration Team Offering Federal  

Broader source: Energy.gov (indexed) [DOE]

Lead Administration Team Offering Lead Administration Team Offering Federal Scientific and Technological Support to BP Engineers Secretaries Chu and Salazar Lead Administration Team Offering Federal Scientific and Technological Support to BP Engineers May 12, 2010 - 12:00am Addthis HOUSTON, TX -- At the request of the President, Secretary Chu and Secretary Salazar traveled to Houston today to participate in meetings with DOE and national lab staff, industry officials and other engineers and scientists involved in finding solutions to cap the flow of oil and contain the spill. Secretary Salazar and Secretary Chu conferred at the BP Command Center in Houston with teams of federal and industry scientists and engineers who are using cutting-edge technological resources and innovative ideas to find solutions to containing the Deepwater Horizon oil spill and

373

Latest 200 Area Demolition Offers Snapshot of Hanford Cleanup Progress:  

Broader source: Energy.gov (indexed) [DOE]

Latest 200 Area Demolition Offers Snapshot of Hanford Cleanup Latest 200 Area Demolition Offers Snapshot of Hanford Cleanup Progress: Recovery Act Funding Allows Demolition of Power Houses Ahead of Schedule Latest 200 Area Demolition Offers Snapshot of Hanford Cleanup Progress: Recovery Act Funding Allows Demolition of Power Houses Ahead of Schedule March 4, 2011 - 12:00pm Addthis Media Contacts Cameron Hardy, DOE (509) 376-5365 Cameron.Hardy@rl.doe.gov Andre Armstrong, CHPRC (509) 376-6773 andre_l_armstrong@rl.g RICHLAND, WASH. - Today's safe and successful explosive demolition at Hanford's 200 Area by U.S. Department of Energy (DOE) contractor CH2M HILL Plateau Remediation Company (CHPRC) is the latest reminder of progress being made on cleanup as a result of American Recovery and Reinvestment Act investments. "Recovery Act funds allowed us to accelerate the schedule for removing

374

Tools for Discovery Offer Potential Hope for Huntington's | Department of  

Broader source: Energy.gov (indexed) [DOE]

Tools for Discovery Offer Potential Hope for Huntington's Tools for Discovery Offer Potential Hope for Huntington's Tools for Discovery Offer Potential Hope for Huntington's May 25, 2011 - 3:24pm Addthis Flora Meilleur prepares protein solutions for structural investigation with neutrons. | Courtesy of ORNL Flickr / Jason Richards Flora Meilleur prepares protein solutions for structural investigation with neutrons. | Courtesy of ORNL Flickr / Jason Richards Charles Rousseaux Charles Rousseaux Senior Writer, Office of Science What does this mean for me? Scientists at ORNL's Center for Structural Molecular Biology are using Bio-SANS to see how biological structures look in their natural state ORNL's tools are leading to better targets and perhaps even potential treatments for diseases like Huntington's. Sometimes the right tool can shape the world . . . or even better, touch a

375

The Blue Ribbon Commission Offers Strong Step Forward | Department of  

Broader source: Energy.gov (indexed) [DOE]

The Blue Ribbon Commission Offers Strong Step Forward The Blue Ribbon Commission Offers Strong Step Forward The Blue Ribbon Commission Offers Strong Step Forward July 29, 2011 - 12:27pm Addthis Damien LaVera Damien LaVera Deputy Director, Office of Public Affairs Today, the Blue Ribbon Commission on America's Nuclear Future issued a draft of its recommendations. The Obama Administration continues to believe that nuclear energy has an important role to play as America moves to a clean energy future. As part of our commitment to restarting the American nuclear industry and creating thousands of new jobs and export opportunities in the process, we are committed to finding a sustainable approach to assuring safe, secure long-term disposal of used nuclear fuel and nuclear waste. Secretary Chu appreciates the hard work done by the members of the Blue

376

In Austin, Energy Secretary to Offer Supercomputer Resources to Industry |  

Broader source: Energy.gov (indexed) [DOE]

In Austin, Energy Secretary to Offer Supercomputer Resources to In Austin, Energy Secretary to Offer Supercomputer Resources to Industry In Austin, Energy Secretary to Offer Supercomputer Resources to Industry March 6, 2012 - 10:46am Addthis WASHINGTON, D.C. - Energy Secretary Steven Chu will be in Austin on Wednesday for an Innovation Summit to engage industry leaders about the opportunity to utilize the Department's supercomputing capabilities to accelerate the development and design of new products and to improve industrial competitiveness. Some of the country's top technology CEOs will be in attendance, including AMD's Rory Read, Cray's Peter J. Ungaro, NVIDIA's Jen-Hsun Huang, and others. The Summit is organized by Oak Ridge National Laboratory. Through the National Laboratories, the Department of Energy operates

377

Eight National Labs Offer Streamlined Partnership Agreements to Help  

Broader source: Energy.gov (indexed) [DOE]

Eight National Labs Offer Streamlined Partnership Agreements to Eight National Labs Offer Streamlined Partnership Agreements to Help Industry Bring New Technologies to Market Eight National Labs Offer Streamlined Partnership Agreements to Help Industry Bring New Technologies to Market February 23, 2012 - 12:38pm Addthis Washington, D.C. - Energy Secretary Steven Chu today announced that eight of the Department's national laboratories will participate in a pilot initiative to make it easier for private companies to utilize the laboratories' research capabilities. The program will harness America's unique advantages in innovation to create jobs and accelerate the development of new clean energy technologies. "The Agreements for Commercializing Technology will cut red tape for businesses and startups interested in working with our nation's crown

378

Latest 200 Area Demolition Offers Snapshot of Hanford Cleanup Progress:  

Broader source: Energy.gov (indexed) [DOE]

Latest 200 Area Demolition Offers Snapshot of Hanford Cleanup Latest 200 Area Demolition Offers Snapshot of Hanford Cleanup Progress: Recovery Act Funding Allows Demolition of Power Houses Ahead of Schedule Latest 200 Area Demolition Offers Snapshot of Hanford Cleanup Progress: Recovery Act Funding Allows Demolition of Power Houses Ahead of Schedule March 4, 2011 - 12:00pm Addthis Media Contacts Cameron Hardy, DOE (509) 376-5365 Cameron.Hardy@rl.doe.gov Andre Armstrong, CHPRC (509) 376-6773 andre_l_armstrong@rl.g RICHLAND, WASH. - Today's safe and successful explosive demolition at Hanford's 200 Area by U.S. Department of Energy (DOE) contractor CH2M HILL Plateau Remediation Company (CHPRC) is the latest reminder of progress being made on cleanup as a result of American Recovery and Reinvestment Act investments. "Recovery Act funds allowed us to accelerate the schedule for removing

379

Nuclear magnetic resonance offers new insights into Pu 239  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nuclear magnetic resonance offers new insights into Pu 239 Nuclear magnetic resonance offers new insights into Pu 239 Nuclear magnetic resonance offers new insights into Pu 239 Fingerprint of element found by LANL/Japanese team. May 29, 2012 How would the detonation of a nuclear energy source afffect an incoming asteroid? Georgios Koutroulakis and H. Yasuoka in the condensed-matter NMR lab at Los Alamos National Laboratory after having observed the magnetic resonance signal of Pu 239 for the first time. Get Expertise Scientist Eric Bauer Condensed Matter & Magnet Science Email Professor Hiroshi Yasuoka Japan Atomic Energy Agency "This discovery of the plutonium 239 magnetic resonance promises to revolutionize our understanding of plutonium solid state physics, chemistry, biology and materials science."

380

DOE Program Offers Participants Unique Opportunity to Gain Carbon Capture  

Broader source: Energy.gov (indexed) [DOE]

Program Offers Participants Unique Opportunity to Gain Carbon Program Offers Participants Unique Opportunity to Gain Carbon Capture and Storage Knowledge DOE Program Offers Participants Unique Opportunity to Gain Carbon Capture and Storage Knowledge February 8, 2011 - 12:00pm Addthis Washington, DC - Future leaders and innovators in the area of carbon capture and storage (CCS) can gain a unique and intensive tutorial on the subject by participating in the U.S. Department of Energy's (DOE) Research Experience in Carbon Sequestration (RECS) program. Supported by the Office of Fossil Energy (FE), the program for graduate students and early career professionals is currently accepting applications for RECS 2011, scheduled for June 5-15, in Birmingham, AL, and the deadline to apply is April 15. An intensive science-based program, RECS 2011 will combine classroom

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Energy Department Offers Conditional Commitment to Support Nevada  

Broader source: Energy.gov (indexed) [DOE]

Department Offers Conditional Commitment to Support Nevada Department Offers Conditional Commitment to Support Nevada Geothermal Development with Recovery Act Funds Energy Department Offers Conditional Commitment to Support Nevada Geothermal Development with Recovery Act Funds June 15, 2010 - 12:00am Addthis Washington D.C. --- Energy Secretary Steven Chu today announced a conditional commitment to provide a partial guarantee for a $98.5 million loan by John Hancock Financial Services to the Nevada Geothermal Power Company (NGP) for a 49.5 megawatt geothermal project in Humboldt County in northwestern Nevada. The NGP Blue Mountain ("Blue Mountain") project consists of a geothermal well field, fluid collection and injection systems that enable energy to be extracted from rock and fluid below the Earth's surface, and a power plant

382

Cutting-Edge Building Technologies Offer Big Energy Savings Potential |  

Broader source: Energy.gov (indexed) [DOE]

Cutting-Edge Building Technologies Offer Big Energy Savings Cutting-Edge Building Technologies Offer Big Energy Savings Potential Cutting-Edge Building Technologies Offer Big Energy Savings Potential November 5, 2013 - 3:36pm Addthis The Building Technologies Office’s Emerging Technologies Program works to advance new commerical building technologies that are expected to reach the marketplace in five years or less. | Photo of National Renewable Energy Laboratory's Research Support Facility by Dennis Schroeder, National Renewable Energy Laboratory The Building Technologies Office's Emerging Technologies Program works to advance new commerical building technologies that are expected to reach the marketplace in five years or less. | Photo of National Renewable Energy Laboratory's Research Support Facility by Dennis Schroeder, National

383

Redesigned CCS Website Offers Wealth of Information on Worldwide  

Broader source: Energy.gov (indexed) [DOE]

Redesigned CCS Website Offers Wealth of Information on Worldwide Redesigned CCS Website Offers Wealth of Information on Worldwide Technology, Projects Redesigned CCS Website Offers Wealth of Information on Worldwide Technology, Projects June 28, 2011 - 1:00pm Addthis Washington, DC - A wealth of information about worldwide carbon capture and storage (CCS) technologies and projects is available on the newly launched, updated and redesigned National Carbon Sequestration Database and Geographic Information System (NATCARB) website. NATCARB is an interactive virtual encyclopedia of key CCS information, including locations and information on field projects, a map of all publically announced worldwide CCS projects and their status; and the complete latest edition of NETL's assessment of carbon storage resource potential in the United States and portions of Canada.

384

Moab Project Offers Unique Educational Resource in Site Tours | Department  

Broader source: Energy.gov (indexed) [DOE]

Project Offers Unique Educational Resource in Site Tours Project Offers Unique Educational Resource in Site Tours Moab Project Offers Unique Educational Resource in Site Tours May 2, 2013 - 12:00pm Addthis Students from the University of Utah contemplate the hillside geology at the rail load out area while Moab Federal Project Director Donald Metzler (in orange vest) addresses a question. The uranium mill tailings pile is behind and below the viewing area. Students from the University of Utah contemplate the hillside geology at the rail load out area while Moab Federal Project Director Donald Metzler (in orange vest) addresses a question. The uranium mill tailings pile is behind and below the viewing area. As Durham University students stand on the bank of the Colorado River, Moab Groundwater Manager Ken Pill (in yellow vest at left) explains how the groundwater interim action system operates. A well vault is in the foreground.

385

Department of Energy Offers Conditional Loan Guarantee Commitments to  

Broader source: Energy.gov (indexed) [DOE]

Commitments Commitments to Support Nearly $4.5 Billion in Loans for Three California Photovoltaic Solar Power Plants Department of Energy Offers Conditional Loan Guarantee Commitments to Support Nearly $4.5 Billion in Loans for Three California Photovoltaic Solar Power Plants June 30, 2011 - 12:00am Addthis Washington D.C. - U.S. Energy Secretary Steven Chu today announced offers of conditional commitments for loan guarantees, of approximately $4.5 billion, to support three alternating current Cadmium Telluride (Cd-Te) thin film photovoltaic (PV) solar generation facilities. The Department is offering a conditional commitment for a $680 million loan guarantee to support the Antelope Valley Solar Ranch 1 project, conditional commitments for partial loan guarantees of $1.88 billion in loans to support the Desert

386

Secretaries Chu and Salazar Lead Administration Team Offering Federal  

Broader source: Energy.gov (indexed) [DOE]

Secretaries Chu and Salazar Lead Administration Team Offering Secretaries Chu and Salazar Lead Administration Team Offering Federal Scientific and Technological Support to BP Engineers Secretaries Chu and Salazar Lead Administration Team Offering Federal Scientific and Technological Support to BP Engineers May 12, 2010 - 12:00am Addthis HOUSTON, TX -- At the request of the President, Secretary Chu and Secretary Salazar traveled to Houston today to participate in meetings with DOE and national lab staff, industry officials and other engineers and scientists involved in finding solutions to cap the flow of oil and contain the spill. Secretary Salazar and Secretary Chu conferred at the BP Command Center in Houston with teams of federal and industry scientists and engineers who are using cutting-edge technological resources and innovative

387

Experts Offer Marines Energy-Efficiency Advice | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Experts Offer Marines Energy-Efficiency Advice Experts Offer Marines Energy-Efficiency Advice Experts Offer Marines Energy-Efficiency Advice December 11, 2009 - 2:05pm Addthis Dr. John Barnett consulted for the military on saving energy in theater. | Photo courtesy NREL Dr. John Barnett consulted for the military on saving energy in theater. | Photo courtesy NREL Joshua DeLung As an early adopter of cutting-edge technologies, the United States military is pioneering energy efficiency and renewable energy technologies in the field. Recently, the Commandant of the United States Marine Corps sent a team to visit bases and camps in Afghanistan to assess and make recommendations on the supply and use of energy and water. If implemented, the findings will reduce demand for resources at military camps in strategically important areas of the country, translating to fewer trucks

388

Manufacturing and testing VLPC hybrids  

SciTech Connect (OSTI)

To insure that the manufacture of VLPC devices is a reliable, cost-effective technology, hybrid assembly procedures and testing methods suitable for large scale production have been developed. This technology has been developed under a contract from Fermilab as part of the D-Zero upgrade program. Each assembled hybrid consists of a VLPC chip mounted on an AlN substrate. The VLPC chip is provided with bonding pads (one connected to each pixel) which are wire bonded to gold traces on the substrate. The VLPC/AlN hybrids are mated in a vacuum sealer using solder preforms and a specially designed carbon boat. After mating, the VLPC pads are bonded to the substrate with an automatic wire bonder. Using this equipment we have achieved a thickness tolerance of {+-}0.0007 inches and a production rate of 100 parts per hour. After assembly the VLPCs are tested for optical response at an operating temperature of 7K. The parts are tested in a custom designed continuous-flow dewar with a capacity 15 hybrids, and one Lake Shore DT470-SD-11 calibrated temperature sensor mounted to an AlN substrate. Our facility includes five of these dewars with an ultimate test capacity of 75 parts per day. During the course of the Dzero program we have assembled more than 4,000 VLPC hybrids and have tested more than 2,500 with a high yield.

Adkins, L. R.; Ingram, C. M.; Anderson, E. J. [Guidance, Navigation and Sensors, Boeing (United States)

1998-11-09T23:59:59.000Z

389

Toward an integrated computational system for describing the additive manufacturing process for metallic materials  

Science Journals Connector (OSTI)

Abstract The ability to simulate the thermal, mechanical, and material response in additive manufacturing offers tremendous utility for gaining a deeper understanding of the process, while also having significant practical application. The approach and progress in establishing an integrated computational system for simulating additive manufacturing of metallic components are discussed, with the primary focus directed at the computational intensive components, which include the process and material models. The ability to experimentally measure key characteristics for verification of the models is also presented and is seen as critical in the development of the integrated computational system. Two examples are also presented that utilize the current features of the analyses techniques for exploring and applying additive manufacturing technology.

Richard Martukanitz; Pan Michaleris; Todd Palmer; Tarasankar DebRoy; Zi-Kui Liu; Richard Otis; Tae Wook Heo; Long-Qing Chen

2014-01-01T23:59:59.000Z

390

Alternative Fuels Data Center: Clean Energy Manufacturing Grants  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Clean Energy Clean Energy Manufacturing Grants to someone by E-mail Share Alternative Fuels Data Center: Clean Energy Manufacturing Grants on Facebook Tweet about Alternative Fuels Data Center: Clean Energy Manufacturing Grants on Twitter Bookmark Alternative Fuels Data Center: Clean Energy Manufacturing Grants on Google Bookmark Alternative Fuels Data Center: Clean Energy Manufacturing Grants on Delicious Rank Alternative Fuels Data Center: Clean Energy Manufacturing Grants on Digg Find More places to share Alternative Fuels Data Center: Clean Energy Manufacturing Grants on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Clean Energy Manufacturing Grants The Clean Energy Manufacturing Incentive Grant Program provides financial

391

Friction Stir Processing for Efficient Manufacturing  

SciTech Connect (OSTI)

Friction at contacting surfaces in relative motion is a major source of parasitic energy loss in machine systems and manufacturing processes. Consequently, friction reduction usually translates to efficiency gain and reduction in energy consumption. Furthermore, friction at surfaces eventually leads to wear and failure of the components thereby compromising reliability and durability. In order to reduce friction and wear in tribological components, material surfaces are often hardened by a variety of methods, including conventional heat treatment, laser surface hardening, and thin-film coatings. While these surface treatments are effective when used in conjunction with lubrication to prevent failure, they are all energy intensive and could potentially add significant cost. A new concept for surface hardening of metallic materials and components is Friction Stir Processing (FSP). Compared to the current surface hardening technologies, FSP is more energy efficient has no emission or waste by products and may result in better tribological performance. FSP involves plunging a rotating tool to a predetermined depth (case layer thickness) and translating the FSP tool along the area to be processed. This action of the tool produces heating and severe plastic deformation of the processed area. For steel the temperature is high enough to cause phase transformation, ultimately forming hard martensitic phase. Indeed, FSP has been used for surface modification of several metals and alloys so as to homogenize the microstructure and refine the grain size, both of which led to improved fatigue and corrosion resistance. Based on the effect of FSP on near-surface layer material, it was expected to have beneficial effects on friction and wear performance of metallic materials. However, little or no knowledge existed on the impact of FSP concerning friction and wear performance the subject of the this project and final report. Specifically for steel, which is the most dominant tribological material, FSP can replace the current conventional surface hardening techniques used for friction and wear performance. Friction Stir Link Inc. (FSL) is teamed with Argonne National Laboratory (ANL) to develop and optimize FSP for friction and wear performance enhancement. The ultimate goal is to offer FSP and an effective alternative to some of the current energy intensive and high-cost surface hardening processes.

Mr. Christopher B. Smith; Dr. Oyelayo Ajayi

2012-01-31T23:59:59.000Z

392

Undergraduate Degrees Offered: Bachelor of Arts in Psychology  

E-Print Network [OSTI]

Undergraduate Degrees Offered: Bachelor of Arts in Psychology Bachelor of Science in Psychology Minor in Psychology "In virtually any of our 24 programs within the College of Liberal Arts and Sciences and Sciences e Department of Psychology mission includes a commitment to scholarly inquiry focused on real

393

SPECIAL OFFER Conservation Science Trade-offs in Conservation  

E-Print Network [OSTI]

Biodiversity Conservation and Poverty Reduction 10. The Power of Traditions in Conservation Economics of Knowledge Future Challenges 18. Climatic Change and Conservation 19. Drivers of Biodiversity Change 20SPECIAL OFFER Conservation Science Trade-offs in Conservation Deciding What to Save NIGEL LEADER

394

technology offer Research and Transfer Support | Tanja Sovic-Gasser  

E-Print Network [OSTI]

technology offer Research and Transfer Support | Tanja Sovic-Gasser Favoritenstrasse 16/E0154 | A of the deposition process their surface topography can be adjusted for repellent - "easy to clean" properties-current pulse phase are major problems in industrial applications. Technology Electroplating is done at constant

Szmolyan, Peter

395

Undergraduate Degrees Offered: Bachelor of Arts in Philosophy  

E-Print Network [OSTI]

Undergraduate Degrees Offered: Bachelor of Arts in Philosophy Bachelor of Science in Philosophy Minor in Philosophy "In virtually any of our 24 programs within the College of Liberal Arts and Sciences and Sciences Major topics in philosophy include morality, science, religion, art, persons, value, political

396

ENGINEERING PHYSICS An Interdisciplinary Program Jointly Offered by the  

E-Print Network [OSTI]

in the world today. An ability to participate in the technological advances not only needs a strong background-electro- mechanical sensors, image processing, and many others. Examples of physics questions associated is required. The goal of the Engineering Physics Program is to offer students a solid background

Lozano-Robledo, Alvaro

397

Nuclear magnetic resonance offers new insights into Pu 239  

E-Print Network [OSTI]

- 1 - Nuclear magnetic resonance offers new insights into Pu 239 May 29, 2012 Nuclear magnetic signal of plutonium 239's unique nuclear magnetic resonance signature has been detected by scientists on the subject, "Observation of 239 Pu Nuclear Magnetic Resonance," was published in the May 18 issue of Science

398

Technology Offer Heterogeneous Leaching Free Pd-Catalyst  

E-Print Network [OSTI]

Technology Offer Heterogeneous Leaching Free Pd-Catalyst For further information please contact) of the carrier particles and the catalyst Potential Fields of Application Production of substituted biphenyls-coupling reactions Overview The present invention relates to non-leaching Pd-catalysts for C-C, C-O or C-N couplings

399

Tsunami-Made Electric Current Could Offer Warning  

E-Print Network [OSTI]

Tsunami-Made Electric Current Could Offer Warning Killer ocean waves apparently generate electric currents in the ocean that might be used to detect tsunamis quickly. By Larry O'Hanlon | Fri Jan 22, 2010 a magnetic field can induce a flow of electrons -- a.k.a. an electrical current. Ocean water is particularly

Harinarayana, T.

400

Social media offers many ways to grow business  

SciTech Connect (OSTI)

Facebook and Twitter and YouTube, oh my! For some of us the added communications channels offered by social media can feel overwhelming in a hurry. But whether we like it or not, theyre proving to be valuable marketing tools that small and large companies alike are jumping on board to explore.

Madison, Alison L.

2011-03-13T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Offering Web-of-Things Connectivity to Building Networks  

E-Print Network [OSTI]

, it actually exists no standard at the application level, having as consequence every building network protocolOffering Web-of-Things Connectivity to Building Networks G´er^ome Bovet Telecom ParisTech 46 Avenue Building management systems (BMS) are nowadays present in new and renovated buildings, relying on dedicated

Paris-Sud XI, Université de

402

ACCELERATED LAW PROGRAM Stevens Institute of Technology offers a  

E-Print Network [OSTI]

ACCELERATED LAW PROGRAM Stevens Institute of Technology offers a six-year combined Bachelor's/J.D. degree program for students interested in pursuing the accelerated law option. After three years of study they attended. ADMISSION REQUIREMENTS In order to be considered for the Accelerated Law Program, students must

Yang, Eui-Hyeok

403

Offered Credit Prerequisites LIFE 320 Ecology F, S 3  

E-Print Network [OSTI]

Advisor: Offered Credit Prerequisites _______ LIFE 320 Ecology F, S 3 BZ 120 or similar, MATH 141 credits NR 440 Applications in Conservation Planning F 3 NRRT 340 _______ F 311 Forest Ecology F, S 3 Ecology FW 477 Habitat for Wildlife F 3 FW 260 FW 400 Conservation of Fish in Aquatic Ecosystems F 3 LIFE

404

CHEMISTRY COURSE OFFERINGS, SPRING, 2014 (Updated 12/05/2013)  

E-Print Network [OSTI]

CHEMISTRY COURSE OFFERINGS, SPRING, 2014 (Updated 12/05/2013) CHEM 0001-01 - CHEMICAL FUNDAMENTALS and chemistry of materials. Three lectures, one laboratory, one recitation. Only one of Chemistry 1, 11, or 16, and coordination chemistry, and chemistry of selected elements. Three lectures, one laboratory, one recitation

Kounaves, Samuel P.

405

CHEMISTRY COURSE OFFERINGS, SPRING, 2015 (updated Oct.28, 2014 )  

E-Print Network [OSTI]

CHEMISTRY COURSE OFFERINGS, SPRING, 2015 (updated Oct.28, 2014 ) CHEM 0001 - CHEMICAL FUNDAMENTALS and chemistry of materials. Three lectures, one laboratory, one recitation. Only one of Chemistry 1, 11, or 16, and coordination chemistry, and chemistry of selected elements. Three lectures, one laboratory, one recitation

Kounaves, Samuel P.

406

CHEMISTRY COURSE OFFERINGS, FALL, 2013 (Updated 8/1/13)  

E-Print Network [OSTI]

CHEMISTRY COURSE OFFERINGS, FALL, 2013 (Updated 8/1/13) CHEM 0001-01 & 0001-02 - CHEMICAL and chemistry of materials. Three lectures, one laboratory, one recitation. Only one of Chemistry 1, 11, or 16, and coordination chemistry, and chemistry of selected elements. Three lectures, one laboratory, one recitation

Kounaves, Samuel P.

407

Statement of Work: Standard Service Offerings for Contractor-Identified Project  

Broader source: Energy.gov [DOE]

Excel file offers a template for a statement of work for standard service offerings for projects identified by a contractor.

408

Education for the ManufacturingEducation for the Manufacturing Industries of the FutureIndustries of the Future  

E-Print Network [OSTI]

Growth. Every $1.00 in manufactured goods generates an additional $1.43 worth of additional economic© ATI 2006 Education for the ManufacturingEducation for the Manufacturing Industries of the FutureIndustries of the Future presented to thepresented to the 2006 MIT Manufacturing Summit:2006 MIT Manufacturing Summit

Brock, David

409

Proceedings of the 1998 NSF Design and Manufacturing Grantees Conferences Manufacturing Logistics Workshop: A Summary of Research Directions  

E-Print Network [OSTI]

Proceedings of the 1998 NSF Design and Manufacturing Grantees Conferences Manufacturing Logistics Louis A. Martin-Vega Lehigh University Abstract: A workshop sponsored by NSF on Manufacturing Logistics for Manufacturing Logistics was defined. In this paper, we summarize future research directions in manufacturing

Wu, David

410

Energetx Composites: Retooling Manufacturing, Creating Michigan Jobs |  

Broader source: Energy.gov (indexed) [DOE]

Energetx Composites: Retooling Manufacturing, Creating Michigan Energetx Composites: Retooling Manufacturing, Creating Michigan Jobs Energetx Composites: Retooling Manufacturing, Creating Michigan Jobs July 23, 2012 - 4:58pm Addthis Using its fiberglass technology expertise and a grant from the Energy Department's State Energy Program (SEP), Energetx Composites was able to shift its operations to producing wind turbine blades. | Photo courtesy of Energetx Composites. Using its fiberglass technology expertise and a grant from the Energy Department's State Energy Program (SEP), Energetx Composites was able to shift its operations to producing wind turbine blades. | Photo courtesy of Energetx Composites. Kristin Swineford Communication Specialist, Weatherization and Intergovernmental Programs What does this mean for me?

411

Clean Energy Manufacturing Resources - Technology Maturation | Department  

Broader source: Energy.gov (indexed) [DOE]

Maturation Maturation Clean Energy Manufacturing Resources - Technology Maturation Clean Energy Manufacturing Resources - Technology Maturation Find resources to help you commercialize and market your clean energy technology or product. For technology maturation, areas to consider include regulations and standards; exporting; product testing or demonstration; energy-efficient product qualifications; and energy efficiency and performance improvements for plants. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Comply With Regulations and Standards DOE Building Technologies Office: Appliance and Equipment Standards - minimum energy conservation standards for more than 50 categories of appliances and equipment. Implementation, Certification and Enforcement - explains DOE

412

DOE Hydrogen Analysis Repository: PEMFC Manufacturing Cost  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PEMFC Manufacturing Cost PEMFC Manufacturing Cost Project Summary Full Title: Manufacturing Cost of Stationary Polymer Electrolyte Membrane (PEM) Fuel Cell Systems Project ID: 85 Principal Investigator: Brian James Keywords: Costs; fuel cells; stationary Performer Principal Investigator: Brian James Organization: Directed Technologies, Inc. (DTI) Address: 3601 Wilson Blvd., Suite 650 Arlington, VA 22201 Telephone: 703-243-3383 Email: brian_james@directedtechnologies.com Period of Performance End: November 1999 Project Description Type of Project: Analysis Category: Cross-Cutting Objectives: Estimate the cost of the fuel cell system using the Directed Technologies, Inc. cost database built up over the several years under U.S. Department of Energy and Ford Motor Company contracts.

413

Improving Green Manufacturing Education in China Universities and Colleges  

Science Journals Connector (OSTI)

Green manufacturing is the irresistible development trend of manufacturing industries throughout the world, and green manufacturing education plays an extremely significant part in the process of going green for ...

Li Chen; Qing-chun Xiang

2014-01-01T23:59:59.000Z

414

Research and Applications of Cloud Manufacturing in China  

Science Journals Connector (OSTI)

In order to improve the produce efficiency of enterprises, scholars put forward many manufacturing modes, such as agile manufacturing, gridding manufacturing, and industry 4.0, IPS2, and so on. These manufacturin...

Bo Hu Li; Lin Zhang; Xudong Chai; Fei Tao

2014-01-01T23:59:59.000Z

415

Additive manufacturing and its societal impact: a literature review  

Science Journals Connector (OSTI)

Thirty years into its development, additive manufacturing has become a mainstream manufacturing process. Additive manufacturing build up parts by adding materials one ... parts on-demand. Its advantages over conv...

Samuel H. Huang; Peng Liu; Abhiram Mokasdar

2013-07-01T23:59:59.000Z

416

Additive Manufacturing Technologies for Enhancing the Development Process of Biodevices  

Science Journals Connector (OSTI)

A new set of manufacturing techniques and technologies has appeared in the ... by the name of rapid prototyping and manufacturing technologies. They are usually based on additive manufacturing processes and a...

Andrs Daz Lantada; Pilar Lafont Morgado

2013-01-01T23:59:59.000Z

417

High Temperature Fuel Cell (Phosphoric Acid) Manufacturing R...  

Broader source: Energy.gov (indexed) [DOE]

Fuel Cell (Phosphoric Acid) Manufacturing R&D High Temperature Fuel Cell (Phosphoric Acid) Manufacturing R&D Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop...

418

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION  

E-Print Network [OSTI]

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION In this course you product development and innovation. You will develop a rich knowledge of additive manufacturing processes enabling advanced/additive manufacturing and personal fabrication. You will have the opportunity

Schumacher, Russ

419

Faculty Position in Ultra High Precision Robotics & Manufacturing  

E-Print Network [OSTI]

, manipulation and metrology systems targeting additive manufacturing; · New kinematics, quasi-perfect guidings, actuators, transmission systems, sensors and methods targeting ultra-high precision additive manufacturingFaculty Position in Ultra High Precision Robotics & Manufacturing at the Ecole Polytechnique

Candea, George

420

Wind Energy & Manufacturing | Open Energy Information  

Open Energy Info (EERE)

Wind Energy & Manufacturing Wind Energy & Manufacturing Jump to: navigation, search Blades manufactured at Gamesa's factory in Ebensburg, Pennsylvania, await delivery for development of wind farms across the country in the United States. Photo from Gamesa, NREL 16001 Wind power creates new high-paying jobs in a wide variety of industries. This includes direct jobs installing, operating, and maintaining wind turbines, as well as jobs at manufacturing facilities that produce wind turbines, blades, electronic components, gearboxes, generators, towers, and other equipment. Indirect jobs in the industries that support these activities are also created.[1] In 2012, 72% of the wind turbine equipment (including towers, blades, and gears) installed in the United States during the year was made in

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Summit Manufacturing: Noncompliance Determination (2010-SE-0303)  

Broader source: Energy.gov (indexed) [DOE]

the the Matter of: Summit Manufacturing, Inc. Case Number 2010-SE-0303 NOTICE OF NONCOMPLIANCE DETERMINATION CERTIFICATION Manufacturers of certain covered products are required to certify compliance with the applicable energy conservation standards through submission of a compliance statement and a certification report. 10 CFR § 430.62. See 42 U.S.C. 6296 . The compliance statement is a legal statement by the manufacturer that the information provided in its certification reports is true , accurate and complete, that the basic models certified meet the applicable energy conservation standard, that the energy efficiency information report is the result of testing performed in conformance with the applicable test requirements in 10 CFR part 430, subpart B; and that the manufacturer is

422

Advanced Methods for Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Methods for Manufacturing Methods for Manufacturing Advanced Methods for Manufacturing The overall purpose of the AMM subprogram is to accelerate innovations that reduce the cost and schedule of constructing new nuclear plants and make fabrication of nuclear power plant components faster, cheaper, and more reliable. Based on past industry work and new stakeholder input, this effort will focus on opportunities that provide simplified, standardized, and labor-saving outcomes for manufacturing, fabrication, assembly, and construction processes (both technologies and methods) and show the most promise in shortening timelines and lowering overall deployment costs. The innovations selected for further development under the AMM program will collectively provide a major means of moving the U.S. nuclear industry from

423

Aurora Photovoltaics Manufacturing | Open Energy Information  

Open Energy Info (EERE)

Aurora Photovoltaics Manufacturing Aurora Photovoltaics Manufacturing Jump to: navigation, search Name Aurora Photovoltaics Manufacturing Place Lawrenceville, New Jersey Zip 8648 Sector Solar Product A subsidiary of EPV solar, based in New Jersey, focused on manufacturing of PV cells. Coordinates 36.761678°, -77.845048° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.761678,"lon":-77.845048,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

424

Leitner Shriram Manufacturing Ltd | Open Energy Information  

Open Energy Info (EERE)

Leitner Shriram Manufacturing Ltd Leitner Shriram Manufacturing Ltd Jump to: navigation, search Name Leitner Shriram Manufacturing Ltd Place Chennai, Tamil Nadu, India Zip 600095 Sector Wind energy Product Chennai-based JV between Leitwind and Shriram EPC with the purpose of manufacturing MW-class wind turbines. Coordinates 13.06397°, 80.24311° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":13.06397,"lon":80.24311,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

425

Manufacturing Research & Technologies | Data.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research & Technologies Research & Technologies Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing Research & Technologies It's clear that the government is working across a wide spectrum to help build the capabilities needed to support American manufacturers. Some agencies have very specific initiatives to help in this area. The National Science Foundation (NSF) Computer and Information Science and Engineering (CISE) Directorate supports research and education projects that (a) explore the foundations of computing and communication devices and their usage, (b) invent new computing and networking technologies and that explore new ways to make use of existing technologies and (c) explore the

426

Miraial formerly Kakizaki Manufacturing | Open Energy Information  

Open Energy Info (EERE)

Miraial formerly Kakizaki Manufacturing Miraial formerly Kakizaki Manufacturing Jump to: navigation, search Name Miraial (formerly Kakizaki Manufacturing) Place Tokyo, Japan Zip 171-0021 Product Manufacturer of wafer handling products and other components for the global semiconductor industry. Coordinates 35.670479°, 139.740921° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.670479,"lon":139.740921,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

427

Cost modeling for monoclonal antibody manufacturing  

E-Print Network [OSTI]

The Novartis BioPharmOps division is responsible for manufacturing large molecule products, including monoclonal antibodies, for late stage clinical trials and commercial sales. The BioPharmOps site in Huningue, France is ...

Simpson, Christina M. (Christina Margaret)

2011-01-01T23:59:59.000Z

428

Exergy Efficiency Definitions for Manufacturing Processes  

Science Journals Connector (OSTI)

The original application of thermodynamic metrics for manufacturing processes has been under development throughout the last decade. The metrics are based on the second law of thermodynamics. Therefore, the exergy

Renald; Karel Kellens; Wim Dewulf

2011-01-01T23:59:59.000Z

429

Clean Energy Technology Device Manufacturers' Credits (Delaware)  

Broader source: Energy.gov [DOE]

Qualified manufacturers can apply for a tax break equal to 75% of the corporation income tax. The incentive is an increase from the Investment and Employment Credit Against Corporation Income Tax,...

430

A haptic stencil for manufacturing applications  

E-Print Network [OSTI]

The haptic stencil consists of a 5 DOF haptic device and an anti-collision algorithm that acts as a geometric stencil and can be used for a variety of applications ranging from training to rapid prototyping and manufacturing. ...

Mansukhani, Kirti Ramesh, 1981-

2004-01-01T23:59:59.000Z

431

Level schedule implementation in unstable manufacturing environments  

E-Print Network [OSTI]

American Axle & Manufacturing Inc. (AAM), headquartered in Detroit (MI) is one of the major Tier 1 suppliers in the automotive industry. The main challenge in AAM plant 2 is production rate unstability due to downtime, ...

Lpez de Haro, Santiago

2008-01-01T23:59:59.000Z

432

4D printing : towards biomimetic additive manufacturing  

E-Print Network [OSTI]

Inherent across all scales in Nature's material systems are multiple design dimensions, the existences of which are products of both evolution and environment. In human manufacturing where design must be preconceived and ...

Tsai, Elizabeth Yinling

2013-01-01T23:59:59.000Z

433

Solid-State Lighting Manufacturing Workshop  

Broader source: Energy.gov [DOE]

Nearly 200 lighting industry leaders, chip makers, fixture and component manufacturers, and others gathered in Fairfax, Virginia, on April 21 and 22, 2009, for the first-ever DOE Solid-State...

434

American Energy and Manufacturing Competitiveness Summit Introduction...  

Broader source: Energy.gov (indexed) [DOE]

costs. Our labor costs for manufacturing are lower than many other countries like Germany and Japan. And third we have a good technology infrastructure. We can put all of...

435

Requirements & Status for Volume Fuel Cell Manufacturing  

E-Print Network [OSTI]

Requirements & Status for Volume Fuel Cell Manufacturing DOE Hydrogen Program, Washington, DC July ­Eliminate components, parts and process steps ­Standardize core components across products ­Standardize non-core

436

Cost Effective Cooling Strategies for Manufacturing Facilities  

E-Print Network [OSTI]

Industrial plants are designed for a specific purpose of manufacturing products or a group of products in the most cost effective way. One factor which is often very poorly addressed is the environmental requirements for the workplace. Environmental...

Kumar, R.

437

Industrial Activities at DOE: Efficiency, Manufacturing, Process...  

Energy Savers [EERE]

Process, and Materials R&D Overview of industrial activities at DOE by Joe Cresko, EERE Advanced Manufacturing Office, at the EERE QC Workshop held December 9-10, 2013, at the...

438

Stronger Manufacturers' Energy Efficiency Standards for Residential...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2006 - 11:09am Addthis WASHINGTON, DC -- To increase the energy efficiency of residential air conditioners, the U.S. Department of Energy (DOE) has issued new manufacturing...

439

Association of Home Appliance Manufacturers Comment  

Broader source: Energy.gov [DOE]

The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on its Regulatory Burden RFI, 79 Fed. Reg. 37963 (July 3, 2014).

440

Cycle to Cycle Manufacturing Process Control  

E-Print Network [OSTI]

Most manufacturing processes produce parts that can only be correctly measured after the process cycle has been completed. Even if in-process measurement and control is possible, it is often too expensive or complex to ...

Hardt, David E.

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Sandia National Laboratories: Numerical Manufacturing And Design...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NuMAD (Numerical Manufacturing And Design) is an open-source software tool written in Matlab which simplifies the process of creating a three-dimensional model of a wind turbine...

442

Refrigerator Manufacturers: Proposed Penalty (2013-CE-5341)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that Refrigerator Manufacturers, LLC failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

443

Steam System Improvements at a Manufacturing Plant  

E-Print Network [OSTI]

BWX Technologies, Naval Nuclear Fuel Division (NNFD) is a manufacturing company with a steam system consisting of two Babcock & Wilcox boilers and approximately 350 steam traps. The steam system is used to produce and distribute steam for space...

Compher, J.; Morcom, B.

444

Pollution from drug manufacturing: review and perspectives  

Science Journals Connector (OSTI)

...19] and Europe [9,14] as pollution sources, with concentrations of...the picture of pharmaceutical pollution from manufacturing is still highly...for some drugs, possibly even air pollution. 2. Effect studies A number of...

2014-01-01T23:59:59.000Z

445

Photographic lens manufacturing and production technologies  

E-Print Network [OSTI]

An investigation was conducted to determine the methods and processes required for the manufacture of photographic objective lenses. Production of photographic lenses requires incredible precision in the melting, mixing, ...

Kubaczyk, Daniel Mark

2011-01-01T23:59:59.000Z

446

Analyzing sampling methodologies in semiconductor manufacturing  

E-Print Network [OSTI]

This thesis describes work completed during an internship assignment at Intel Corporation's process development and wafer fabrication manufacturing facility in Santa Clara, California. At the highest level, this work relates ...

Anthony, Richard M. (Richard Morgan), 1971-

2004-01-01T23:59:59.000Z

447

Advanced Technology Vehicles Manufacturing (ATVM) Loan Program  

Broader source: Energy.gov [DOE]

The Advanced Technology Vehicles Manufacturing (ATVM) loan program was established inSection 136 of the Energy Independence and Security Act of 2007to support the production of fuel-efficient,...

448

Energy Department Trains Veterans in Advanced Manufacturing  

Office of Energy Efficiency and Renewable Energy (EERE)

Today, the first 24 participants marked the successful completion of the Advanced Manufacturing Internship program, a pilot effort sponsored by the U.S. Department of Energys (DOE) Office of Energy Efficiency and Renewable Energy (EERE).

449

Validation of Gene Therapy Manufacturing Processes  

Science Journals Connector (OSTI)

Specific issues of concern in the validation of gene therapy viral vector manufacturing processes include quality of raw materials, safety testing of cell and viral banks, production and purification of the ve...

Dominick Vacante; Gail Sofer; Stephen Morris

2002-01-01T23:59:59.000Z

450

Department of Energy Offers First Conditional Commitment for a Loan  

Broader source: Energy.gov (indexed) [DOE]

First Conditional Commitment for a Loan First Conditional Commitment for a Loan Guarantee for Advanced Biofuels Plant Department of Energy Offers First Conditional Commitment for a Loan Guarantee for Advanced Biofuels Plant January 20, 2011 - 12:00am Addthis Washington D.C. --- U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment to Diamond Green Diesel, LLC, the proposed joint venture between Valero Energy Corporation and Darling International Inc., for a $241 million loan guarantee. The loan guarantee will support the construction of a 137-million gallon per year renewable diesel facility in Norco, Louisiana, about 20 miles west of New Orleans. Valero Energy Corporation plans to direct the design, construction and operation of the project and market all of its output, while Darling

451

Department of Energy Offers First Conditional Commitment for a Loan  

Broader source: Energy.gov (indexed) [DOE]

First Conditional Commitment for a Loan First Conditional Commitment for a Loan Guarantee for Advanced Biofuels Plant Department of Energy Offers First Conditional Commitment for a Loan Guarantee for Advanced Biofuels Plant January 20, 2011 - 12:00am Addthis Washington D.C. --- U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment to Diamond Green Diesel, LLC, the proposed joint venture between Valero Energy Corporation and Darling International Inc., for a $241 million loan guarantee. The loan guarantee will support the construction of a 137-million gallon per year renewable diesel facility in Norco, Louisiana, about 20 miles west of New Orleans. Valero Energy Corporation plans to direct the design, construction and operation of the project and market all of its output, while Darling

452

New Breathalyzer Offers Hope of Pain-Free Diabetes Monitoring  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

8, 2013 8, 2013 New Breathalyzer Offers Hope of Pain-Free Diabetes Monitoring Diabetes Carbon nanotube armchair povray Researchers at the Department of Energy's National Energy Technology Laboratory (NETL) have teamed up with their Regional University Alliance (NETL-RUA) colleagues to develop a new hybrid nanostructure that could make it easier to monitor blood sugar. When used as a sensing tool in a breath analyzer, the new material could offer a way for millions of diabetics to avoid the pain and hassle of finger sticks. How will it work? By detecting acetone. Everyone produces a certain level of acetone through normal, daily metabolic processes. But diabetics produce it in larger amounts and also exhale it at a higher rate than non-diabetics, which is what produces the "fruity" aroma present when

453

Department of Energy Offers Conditional Commitment for Loan Guarantee to  

Broader source: Energy.gov (indexed) [DOE]

Loan Loan Guarantee to Support Solar Generation Project in Nevada Department of Energy Offers Conditional Commitment for Loan Guarantee to Support Solar Generation Project in Nevada May 19, 2011 - 12:00am Addthis Washington D.C. --- U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment for a $737 million loan guarantee to support a 110 megawatt molten salt concentrating solar power (CSP) tower generating facility. The Crescent Dunes Solar Energy Project, sponsored by SolarReserve, LLC, will be the first of its kind in the United States and the tallest molten salt tower in the world. Located 14 miles northwest of Tonopah, Nevada on 2,250 acres leased from the Bureau of Land Management, the company anticipates the facility will create 600

454

Department of Energy Offers $17 Million Conditional Commitment to Improve  

Broader source: Energy.gov (indexed) [DOE]

7 Million Conditional Commitment to 7 Million Conditional Commitment to Improve Reliability of New York State's Electrical Grid Department of Energy Offers $17 Million Conditional Commitment to Improve Reliability of New York State's Electrical Grid August 2, 2010 - 12:00am Addthis Washington D.C. --- Energy Secretary Steven Chu today offered AES Energy Storage, LLC a conditional commitment for a loan guarantee for $17.1 million to support the construction of a 20 megawatt (MW) energy storage system using advanced lithium-ion batteries. The AES project, located in Johnson City, New York, will help provide a more stable and efficient electrical grid for the state's high-voltage transmission network. "Effective energy storage systems are crucial to harnessing the power of renewable energy and getting it onto the grid," said Secretary Chu.

455

Department of Energy Offers $102 Million Conditional Commitment for Loan  

Broader source: Energy.gov (indexed) [DOE]

02 Million Conditional Commitment for 02 Million Conditional Commitment for Loan Guarantee to U.S. Geothermal, Inc. Department of Energy Offers $102 Million Conditional Commitment for Loan Guarantee to U.S. Geothermal, Inc. June 10, 2010 - 12:00am Addthis Washington, D.C. --- Energy Secretary Steven Chu today announced the offer of a $102.2 million conditional commitment for a loan guarantee to U.S. Geothermal, Inc. to construct a 22 megawatt geothermal power project in Malheur County, in southeastern Oregon. U.S. Geothermal estimates that the planned project will create 150 jobs during the 20-month construction period and employ 10 skilled full-time workers when it begins operating in 2012. The project will use an improved technology to extract energy from rock and fluids in the earth's crust more efficiently. The technology, referred to

456

Department of Energy Offers Support for Arizona Solar Project | Department  

Broader source: Energy.gov (indexed) [DOE]

Arizona Solar Project Arizona Solar Project Department of Energy Offers Support for Arizona Solar Project January 20, 2011 - 12:00am Addthis Washington D.C. --- U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment to Agua Caliente Solar, LLC for a loan guarantee of up to $967 million. The loan guarantee will support the construction of a 290-megawatt photovoltaic solar generating facility located in Yuma County, Arizona that will use thin film solar panels from First Solar, Inc. The project sponsor, NRG Solar, estimates the project will be the largest photovoltaic generation facility in the world when it is completed. "Solar projects like this are helping the U.S. to compete globally for the clean energy jobs of today and the future," said Secretary Chu. "The

457

Department of Energy Offers Vehicle Production Group Nearly $50 Million  

Broader source: Energy.gov (indexed) [DOE]

Vehicle Production Group Nearly $50 Vehicle Production Group Nearly $50 Million Conditional Loan Commitment Department of Energy Offers Vehicle Production Group Nearly $50 Million Conditional Loan Commitment November 22, 2010 - 12:00am Addthis Washington, D.C. - U.S. Energy Secretary Steven Chu announced today an offer of a nearly $50 million conditional loan commitment to The Vehicle Production Group LLC (VPG). The conditional loan commitment will support the development of the six-passenger MV-1, a factory-built wheelchair accessible vehicle that will run on compressed natural gas. The vehicle will be produced at the Mishawaka, Indiana AM General Plant. "This project represents an investment in innovation that will create new jobs, promote the use of alternative fuels, and help our nation maintain

458

Department of Energy Offers Support for Arizona Solar Project | Department  

Broader source: Energy.gov (indexed) [DOE]

Support for Arizona Solar Project Support for Arizona Solar Project Department of Energy Offers Support for Arizona Solar Project January 20, 2011 - 12:00am Addthis Washington D.C. --- U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment to Agua Caliente Solar, LLC for a loan guarantee of up to $967 million. The loan guarantee will support the construction of a 290-megawatt photovoltaic solar generating facility located in Yuma County, Arizona that will use thin film solar panels from First Solar, Inc. The project sponsor, NRG Solar, estimates the project will be the largest photovoltaic generation facility in the world when it is completed. "Solar projects like this are helping the U.S. to compete globally for the clean energy jobs of today and the future," said Secretary Chu. "The

459

Department of Energy Offers Abengoa Bioenergy a Conditional Commitment for  

Broader source: Energy.gov (indexed) [DOE]

Abengoa Bioenergy a Conditional Abengoa Bioenergy a Conditional Commitment for a $133.9 Million Loan Guarantee Department of Energy Offers Abengoa Bioenergy a Conditional Commitment for a $133.9 Million Loan Guarantee August 19, 2011 - 11:15am Addthis Groundbreaking Cellulosic Ethanol Project Expected to Create Over 300 Jobs and Build Nation's Capacity for Cellulosic Ethanol Production Washington D.C. - U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment for a $133.9 million loan guarantee to Abengoa Bioenergy Biomass of Kansas LLC (ABBK) to support the development of a commercial-scale cellulosic ethanol plant. ABBK's parent company and project sponsor, Abengoa Bioenergy US Holding, Inc., estimates the project will create approximately 300 construction jobs and 65 permanent

460

Risk management practices in global manufacturing investment  

E-Print Network [OSTI]

the company of devout bring to a man.(NITI SHATAKAM of Bhartrihari, Sanskrit Poet, 6th Century) ii ABSTRACT This thesis explores risk management practices in global manufacturing investment. It reflects the growing internationalisation of manufacturing... (Narula & Dunning, 2000). Many academic publications and global institutions reports reflect this an increase in globalisation. UNCTAD reports the positive impact of globalisation across the world. This report states the difference in per capita...

Kumar, Mukesh

2010-07-06T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Energetic additive manufacturing process with feed wire  

DOE Patents [OSTI]

A process for additive manufacture by energetic wire deposition is described. A source wire is fed into a energy beam generated melt-pool on a growth surface as the melt-pool moves over the growth surface. This process enables the rapid prototyping and manufacture of fully dense, near-net shape components, as well as cladding and welding processes. Alloys, graded materials, and other inhomogeneous materials can be grown using this process.

Harwell, Lane D. (Albuquerque, NM); Griffith, Michelle L. (Albuquerque, NM); Greene, Donald L. (Corrales, NM); Pressly, Gary A. (Sandia Park, NM)

2000-11-07T23:59:59.000Z

462

Global manufacturing model and case studies  

E-Print Network [OSTI]

chain network. 3. 7 Level of firm's global manufacturing competitiveness. . . . 3. 8 A typical unit-cost curve. . 3. 9 Ford Fiesta production network in Western Europe. . . . . . . 35 38 39 42 3. 10 Integrated information system, 51 3. 11 World..., Japan, and Europe. 4. 1 Hofstede's scores of USA and Mexico. 91 4. 2 Average daily wage plus benefits and taxes by occupation. . . . 94 CHAPTER I INTRODUCTION Black & Decker, a $5 billion U. S. -based manufacturer of hand tools, provides an example...

Kijtawesataporn, Komsun

2012-06-07T23:59:59.000Z

463

Manufacturing Environment in the Year 2000  

E-Print Network [OSTI]

-l's Advanced Technical Planning Committee and the major companies they represent have evaluated the content and direction. Leading professionals in the CIM field have endorsed this paper as well as contributed to its content. Companies such as Hughes... have been eliminated; the walls between manufacturing; engineering, ma ket ing and finance have been replaced with one cohesive system that works ...CIM ...Computer Inte grated Manufacturing. I i Numerous architectures have been designed :hat...

Slautterback, W. H.

464

Duracold Refrigeration Manufacturing: Order (2013-CE-5342) | Department of  

Broader source: Energy.gov (indexed) [DOE]

Duracold Refrigeration Manufacturing: Order (2013-CE-5342) Duracold Refrigeration Manufacturing: Order (2013-CE-5342) Duracold Refrigeration Manufacturing: Order (2013-CE-5342) April 25, 2013 DOE ordered Duracold Refrigeration Manufacturing Company, LLC to pay a $8,000 civil penalty after finding Duracold Refrigeration Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Duracold Refrigeration Manufacturing. Duracold Refrigeration Manufacturing: Order (2013-CE-5342) More Documents & Publications Duracold Refrigeration Manufacturing: Proposed Penalty (2013-CE-5342) North Star Refrigerator: Order (2013-CE-5355) Schott Gemtron: Order (2013-CE-5358

465

Contact Manufacturing Demonstration Facility Craig Blue, Ph.D.  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Demonstration Facility Craig Blue, Ph.D. Director, Manufacturing Demonstration Facility (865) 574-4351 blueca@ornl.gov INNOVATIONS IN MANUFACTURING www.ornl.gov/manufacturing Advanced Manufacturing Next-Generation Manufacturing As the nation's premier research laboratory, Oak Ridge National Laboratory is one of the world's most capable resources for transforming the next generation of scientific discovery into solutions for rebuilding and revitalizing America's manufacturing industries. These industries call upon ORNL's expertise in materials synthesis, characterization, and process technology to reduce risk and accelerate the development and deployment of innovative energy-efficient manufacturing processes and materials targeting products of the future.

466

A Review of Engineering Research in Sustainable Manufacturing  

E-Print Network [OSTI]

focused on sustainable processes and systems. Despite recentto make their processes more sustainable, evaluating theirManufacturing Process Design for Sustainable Manufacturing,

2013-01-01T23:59:59.000Z

467

Local Program Helps Alabama Manufacturers Add Jobs, Reduce Waste...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Local Program Helps Alabama Manufacturers Add Jobs, Reduce Waste and Increase Profits Local Program Helps Alabama Manufacturers Add Jobs, Reduce Waste and Increase Profits April 8,...

468

PEM Stack Manufacturing: Industry Status | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

American Energy and Manufacturing Competitiveness Summit Low Temperature PEM Fuel Cell Manufacturing Needs A Total Cost of Ownership Model for Low Temperature PEM Fuel...

469

Slice Contour Modification in Additive Manufacturing for Minimizing Part Errors.  

E-Print Network [OSTI]

??Additive Manufacturing (AM) is a process of manufacturing parts by combining layers of materials which are deposited on top of each other. AM processes have (more)

Sharma, Kunal

2014-01-01T23:59:59.000Z

470

Webinar: Additive Manufacturing for Fuel Cells | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Additive Manufacturing for Fuel Cells Webinar: Additive Manufacturing for Fuel Cells February 11, 2014 5:00PM to 6:00PM EST Online...

471

Celgard US Manufacturing Facilities Initiative for Lithium-ion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Celgard US Manufacturing Facilities Initiative for Lithium-ion Battery Separator Celgard US Manufacturing Facilities Initiative for Lithium-ion...

472

Miracle Wind Power Components Manufacture Co Ltd | Open Energy...  

Open Energy Info (EERE)

Miracle Wind Power Components Manufacture Co Ltd Jump to: navigation, search Name: Miracle Wind Power Components Manufacture Co Ltd Place: Wuxi, Jiangsu Province, China Sector:...

473

EA-1834: Severstal Dearborn Advanced Technology Vehicle Manufacturing...  

Broader source: Energy.gov (indexed) [DOE]

4: Severstal Dearborn Advanced Technology Vehicle Manufacturing Project in Dearborn, MI EA-1834: Severstal Dearborn Advanced Technology Vehicle Manufacturing Project in Dearborn,...

474

U.S. Offshore Wind Manufacturing and Supply Chain Development...  

Office of Environmental Management (EM)

U.S. Offshore Wind Manufacturing and Supply Chain Development U.S. Offshore Wind Manufacturing and Supply Chain Development This report seeks to provide an organized, analytical...

475

Joint Fuel Cell Technologies and Advanced Manufacturing Webinar...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Joint Fuel Cell Technologies and Advanced Manufacturing Webinar Joint Fuel Cell Technologies and Advanced Manufacturing Webinar Download the presentation slides from the "Joint...

476

Energy Use Loss and Opportunities Analysis: U.S. Manufacturing...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Use Loss and Opportunities Analysis: U.S. Manufacturing & Mining Energy Use Loss and Opportunities Analysis: U.S. Manufacturing & Mining energyuselossopportunitiesanalys...

477

DOE Initiates Enforcement Actions Against 4 Showerhead Manufacturers...  

Office of Environmental Management (EM)

Against 4 Showerhead Manufacturers (Notice of Proposed Civil Penalty and Requests for Test Data Issued) DOE Initiates Enforcement Actions Against 4 Showerhead Manufacturers...

478

Energy Department to Work with National Association of Manufacturers...  

Office of Environmental Management (EM)

to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency Energy Department to Work with National Association of Manufacturers to Increase...

479

Design for manufacturability with regular fabrics in digital integrated circuits  

E-Print Network [OSTI]

Integrated circuit design is limited by manufacturability. As devices scale down, sensitivity to process variation increases dramatically, making design for manufacturability a critical concern. Designers must identify the ...

Gazor, Mehdi (Seyed Mehdi)

2005-01-01T23:59:59.000Z

480

Fiber Reinforced Polymer Composite Manufacturing - RFI DE-FOA...  

Energy Savers [EERE]

Polymer Composite Manufacturing - RFI Part 2 DE-FOA-0001056: Summary of Responses Clean Energy Manufacturing Innovation Institute for Composite Materials And Structures Webinar...

Note: This page contains sample records for the topic "manufacturers offer hundreds" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

$23.5 Million Investment in Innovative Manufacturing Projects...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Manufacturing Projects Supports the New Clean Energy Manufacturing Initiative March 26, 2013 - 9:56am Addthis As part of the President's effort "to guarantee that the next...

482

Manufacturing Pre-Solicitation Transcript | Department of Energy  

Office of Environmental Management (EM)

Transcript Manufacturing Pre-Solicitation Transcript Transcript from the US DOE Hydrogen Program Manufacturing R&D Pre-Solicitation Meeting presolicitationtranscript.pdf...

483

DOE's Hydrogen and Fuel Cell Technologies Manufacturing Sub-Program...  

Office of Environmental Management (EM)

DOE's Hydrogen and Fuel Cell Technologies Manufacturing Sub-Program DOE's Hydrogen and Fuel Cell Technologies Manufacturing Sub-Program Presented at the NREL Hydrogen and Fuel Cell...

484

Preliminary Fuel Cell Manufacturing R&D Topics | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Preliminary Fuel Cell Manufacturing R&D Topics Preliminary Fuel Cell Manufacturing R&D Topics Preliminary draft research topics subject to revision prior to a soliciatation being...

485

20% Wind Energy by 2030 - Chapter 3: Manufacturing, Materials...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

3: Manufacturing, Materials, and Resources Summary Slides 20% Wind Energy by 2030 - Chapter 3: Manufacturing, Materials, and Resources Summary Slides Summary Slides for Chapter 3:...

486

Proceedings from the Wind Manufacturing Workshop: Achieving 20...  

Office of Environmental Management (EM)

Proceedings from the Wind Manufacturing Workshop: Achieving 20% Wind Energy in the U.S. by 2030, May 2009 Proceedings from the Wind Manufacturing Workshop: Achieving 20% Wind...

487

Commonwealth Aluminum: Manufacturer Conducts Plant-Wide Energy...  

Broader source: Energy.gov (indexed) [DOE]

Commonwealth Aluminum: Manufacturer Conducts Plant-Wide Energy Assessments at Two Aluminum Sheet Production Operations Commonwealth Aluminum: Manufacturer Conducts Plant-Wide...

488

Manufacturers of Noncompliant Products Agree to Civil Penalties...  

Energy Savers [EERE]

Air-Con Agrees to Pay Civil Penalty to Resolve Enforcement Action Showerhead Manufacturer Agrees to Civil Penalty to Resolve Enforcement Action Two Manufacturers Agree to...

489

Indian Wind Turbine Manufacturers Association | Open Energy Informatio...  

Open Energy Info (EERE)

Manufacturers Association Jump to: navigation, search Name: Indian Wind Turbine Manufacturers Association Place: Chennai, India Zip: 600 041 Sector: Wind energy Product:...

490

AMO Industry Day Workshop on Upcoming Smart Manufacturing FOA  

Broader source: Energy.gov [DOE]

AMO will host an Industry Day workshop to explain the concept, vision, and technology needs associated with support for a Clean Energy Manufacturing Innovation Institute on Smart Manufacturing.

491

AMO Issues Request for Information on Clean Energy Manufacturing...  

Energy Savers [EERE]

Request for Information on Clean Energy Manufacturing Topics, Including Fuel Cell and Hydrogen Applications AMO Issues Request for Information on Clean Energy Manufacturing Topics,...

492

Li-Ion Battery Cell Manufacturing | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Li-Ion Battery Cell Manufacturing Li-Ion Battery Cell Manufacturing 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer...

493

References and Appendices: U.S. Manufacturing Energy Use and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

4 U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis REFERENCES AMO (Advanced Manufacturing Office), EERE (Energy Efficiency and Renewable Energy). 2012a. Consider...

494

Metal and Glass Manufacturers Reduce Costs by Increasing Energy...  

Broader source: Energy.gov (indexed) [DOE]

Metal and Glass Manufacturers Reduce Costs by Increasing Energy Efficiency in Process Heating Systems Metal and Glass Manufacturers Reduce Costs by Increasing Energy Efficiency in...

495

Unlocking the Potential of Additive Manufacturing in the Fuel...  

Broader source: Energy.gov (indexed) [DOE]

Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry PDF includes slides from...

496

Upcoming Webinar February 11: Additive Manufacturing for Fuel...  

Broader source: Energy.gov (indexed) [DOE]

February 11: Additive Manufacturing for Fuel Cells Upcoming Webinar February 11: Additive Manufacturing for Fuel Cells February 6, 2014 - 12:00am Addthis On Tuesday, February 11,...

497

Energy Department Launches New Clean Energy Manufacturing Initiative |  

Broader source: Energy.gov (indexed) [DOE]

New Clean Energy Manufacturing New Clean Energy Manufacturing Initiative Energy Department Launches New Clean Energy Manufacturing Initiative March 26, 2013 - 10:56am Addthis News Media Contact (202) 586-4940 OAK RIDGE - As part of the Obama Administration's commitment to revitalizing America's manufacturing sector, today the Energy Department launched the Clean Energy Manufacturing Initiative (CEMI), a new Department initiative focused on growing American manufacturing of clean energy products and boosting U.S. competitiveness through major improvements in manufacturing energy productivity. The initiative includes private sector partnerships, new funding from the Department, and enhanced analysis of the clean energy manufacturing supply chain that will guide the Department's future funding decisions.

498

A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process  

Science Journals Connector (OSTI)

Abstract Nowadays, due to rapid prototyping processes improvements, a functional metal part can be built directly by Additive Manufacturing. It is now accepted that these new processes can increase productivity while enabling a mass and cost reduction and an increase of the parts functionality. However, the physical phenomena that occur during these processes have a strong impact on the quality of the produced parts. Especially, because the manufacturing paths used to produce the parts lead these physical phenomena, it is essential to considerate them right from the parts design stage. In this context, a new numerical chain based on a new design for Additive Manufacturing (DFAM) methodology is proposed in this paper, the new DFAM methodology being detailed; both design requirements and manufacturing specificities are taken into account. The corresponding numerical tools are detailed in the particular case of thin-walled metal parts manufactured by an Additive Laser Manufacturing (ALM) process.

Remi Ponche; Olivier Kerbrat; Pascal Mognol; Jean-Yves Hascoet

2014-01-01T23:59:59.000Z

499

A Quantitative Study of the Impact of Additive Manufacturing in the Aircraft Spare Parts Supply Chain.  

E-Print Network [OSTI]

??Additive manufacturing is a promising manufacturing technology which is finding its way into mainstream manufacturing industry. As compared to conventional manufacturing it has a number (more)

Mokasdar, Abhiram S., M.S.

2012-01-01T23:59:59.000Z

500

The advanced manufacturing science and technology program. FY 95 Annual Report  

SciTech Connect (OSTI)

This is the Fiscal Year 1995 Annual Report for the Advanced Manufacturing Science and Technology (AMST) sector of Los Alamos Tactical Goal 6, Industrial Partnering. During this past fiscal year, the AMST project leader formed a committee whose members represented the divisions and program offices with a manufacturing interest to examine the Laboratory`s expertise and needs in manufacturing. From a list of about two hundred interest areas, the committee selected nineteen of the most pressing needs for weapon manufacturing. Based upon Los Alamos mission requirements and the needs of the weapon manufacturing (Advanced Design and Production Technologies (ADaPT)) program plan and the other tactical goals, the committee selected four of the nineteen areas for strategic planning and possible industrial partnering. The areas selected were Casting Technology, Constitutive Modeling, Non-Destructive Testing and Evaluation, and Polymer Aging and Lifetime Prediction. For each area, the AMST committee formed a team to write a roadmap and serve as a partnering technical consultant. To date, the roadmaps have been completed for each of the four areas. The Casting Technology and Polymer Aging teams are negotiating with specific potential partners now, at the close of the fiscal year. For each focus area we have created a list of existing collaborations and other ongoing partnering activities. In early Fiscal Year 1996, we will continue to develop partnerships in these four areas. Los Alamos National Laboratory instituted the tactical goals for industrial partnering to focus our institutional resources on partnerships that enhance core competencies and capabilities required to meet our national security mission of reducing the nuclear danger. The second industry sector targeted by Tactical Goal 6 was the chemical industry. Tactical Goal 6 is championed by the Industrial Partnership Office.

Hill, J. [comp.

1996-03-01T23:59:59.000Z