Powered by Deep Web Technologies
Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Biomass IBR Fact Sheet: Archer Daniels Midland  

Broader source: Energy.gov [DOE]

Archer Daniels Midland will develop a pilot plant to demonstrate the continuous production of cellulosic ethanol and butyl acrylate from densified corn stover.

2

Archer Daniels Midland Company | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste andAccess to OUO Access toEnergy 5 BTOof Energy6,Archer Daniels

3

Daniel E. Archer Ph.D., Experimental Nuclear Structure Physics, Florida State University, 1996  

E-Print Network [OSTI]

Daniel E. Archer Ph.D., Experimental Nuclear Structure Physics, Florida State University, 1996 M with particular expertise in experimental nuclear physics, including "hands-on" laboratory experience · Leadership.S., Physics, Florida State University, 1993 B.S., Physics (Major), Computer Based Honors Program (Minor

4

Archer Daniels Midland | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300AlgoilEnergy InformationArcata, California: Energy ResourcesN

5

GaInP/GaAs dual junction solar cells on Ge/Si epitaxial templates Melissa J. Archer,1,a  

E-Print Network [OSTI]

GaInP/GaAs dual junction solar cells on Ge/Si epitaxial templates Melissa J. Archer,1,a Daniel C Richard R. King,2 and Harry A. Atwater1 1 California Institute of Technology, Pasadena, California 91125, USA 2 Spectrolab, Inc., Sylmar, California 91342, USA 3 Aonex Technologies, Pasadena, California 91106

Atwater, Harry

6

directory of reSeArcherS  

E-Print Network [OSTI]

Applied ScienceS directory of reSeArcherS SPRING 2014 DIRECTORY #12;2 " WelcoMetothe fAcUlty of Applied ScienceS, Where We Are coMMitted to eXcellence in teAchinG, reSeArch And innovAtion.thiS directory

7

directory of reSeArcherS  

E-Print Network [OSTI]

Applied ScienceS directory of reSeArcherS SPRING 2013 DIRECTORY #12;2 " WelcoMetothe fAcUlty of Applied ScienceS, Where We Are coMMitted to eXcellence in teAchinG And reSeArch. thiS directory Will ASSi

Kavanagh, Karen L.

8

CRISTINA L. ARCHER (ne Cristina Lozej)  

E-Print Network [OSTI]

: Saturation wind power potential and its implications for wind energy. Proceedings of the National Academy: California offshore wind energy potential. Renewable Energy, doi:10.1016/j.renene.2009.11.022. Archer, C. L: Exploring wind energy potential off the California Coast. Geophysical Research Letters, doi:10.1029/2008GL

Firestone, Jeremy

9

E-Print Network 3.0 - archer fishes toxotes Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 4 5 > >> 1 Orientation saliency without visual cortex and target selection in archer fish Summary: . A total of five archer fish (Toxotes jaculatrix) participated in the...

10

V-234: EMC RSA Archer GRC Open Redirection Weakness and Security...  

Energy Savers [EERE]

4: EMC RSA Archer GRC Open Redirection Weakness and Security Bypass Security Issue V-234: EMC RSA Archer GRC Open Redirection Weakness and Security Bypass Security Issue September...

11

Manufacturing  

Office of Environmental Management (EM)

Flow of Materials through Industry Sustainable 1 Manufacturing 2 Technology Assessment 3 Contents 4 1. Introduction to the TechnologySystem ......

12

Daniel White  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Daniel White About ESnet Our Mission The Network ESnet History Governance & Policies Career Opportunities ESnet Staff & Org Chart Administration Advanced Network Technologies...

13

V-151: RSA Archer eGRC Bugs Let Remote Authenticated Users Upload...  

Energy Savers [EERE]

5.x ABSTRACT: Several vulnerabilities were reported in RSA Archer eGRC. REFERENCE LINKS: EMC SecurityTracker Alert ID: 1028516 CVE-2013-0932 CVE-2013-0933 CVE-2013-0934 IMPACT...

14

V-084: RSA Archer eGRC Permits Cross-Site Scripting, Cross-Domain...  

Broader source: Energy.gov (indexed) [DOE]

Users Upload Files and Let Remote Users Conduct Cross-Site Scripting Attacks V-234: EMC RSA Archer GRC Open Redirection Weakness and Security Bypass Security Issue U-129: RSA...

15

Evaluation of global wind power Cristina L. Archer and Mark Z. Jacobson  

E-Print Network [OSTI]

Evaluation of global wind power Cristina L. Archer and Mark Z. Jacobson Department of Civil the world's wind power potential for the first time from data. Wind speeds are calculated at 80 m, the hub% of all reporting stations experience annual mean wind speeds ! 6.9 m/s at 80 m (i.e., wind power class 3

16

Daniel Haskel  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases onOrganizationElectronic2005-2007Dan GabrielDaniel Haskel Argonne

17

Daniel Peterson  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOffice ofINL is a U.S.11-26-20131 10 150DanDanielDan

18

Daniel White  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOffice ofINL is a U.S.11-26-20131 10Daniel White

19

Edward Daniels | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Edward Daniels Edward Daniels Deputy Associate Laboratory Director - Energy and Global Security Mr. Daniels is currently a deputy associate laboratory director in the Energy...

20

A review of "Old Worlds: Egypt, Southwest Asia, India, and Russia in Early Modern English Writing." by John Michael Archer  

E-Print Network [OSTI]

?s Anthony and Cleopatra. Archer?s reading of Cleopatra as ?Egypt? invokes gender, sexual, and racial stereotypes, but does not show definitively that the play confirms the model of degeneration. The author argues that Egypt was reconstructed in early... Cleopatra as a wonderful piece of work (61) and that early modern English fantasy of Egyptian empire was not altogether unattractive. Hence, the author?s state- ments that Anthony and Cleopatra ?coincides? with the shift in repre- sentation of Egypt...

Galina Yermolenko

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Daniel A. Hitchcock  

Broader source: Energy.gov [DOE]

Dr. Daniel A. Hitchcock is the acting Associate Director for Advanced Scientific Computing in the Office of Science.

22

Curriculum Vitae Daniel D. Hernandez  

E-Print Network [OSTI]

Curriculum Vitae Daniel D. Hernandez Department of Physics and Astronomy, San Francisco State Assistant #12;Curriculum Vitae Daniel Hernandez OCCUPATION Jan 2009 - Present Research Assistant Quantum;Curriculum Vitae Daniel Hernandez A. Research environmental impact statements and acoustics journals

Chen, Zhigang

23

MANUFACTURING Manufacturing and Biomanufacturing  

E-Print Network [OSTI]

process improvements to manufacturing. In addition, the critical national need area of Manufacturing hasMANUFACTURING Manufacturing and Biomanufacturing: Materials Advances and Critical Processes NATIONAL NEED The proposed topics within "Manufacturing and Biomanufacturing: Materials Advances

Magee, Joseph W.

24

Daniel Phillips: Publications  

E-Print Network [OSTI]

[1], Sookyung Joo and Daniel Phillips. ... 2, 341-359 [MR 2002b:35235]. ... In Proceedings of Dynamic Systems and Applications, Vol.1 (Atlanta, GA, 1993), ...

25

Curriculum Vitae Daniel Udovic  

E-Print Network [OSTI]

Curriculum Vitae Daniel Udovic Address: Center for Ecology & Evolutionary Biology, 5289 University­1973 Department of Entomology, Cornell University #12;Curriculum Vitae Daniel Udovic August 2009 Page 2 GRANTS­1995 Department of Biology, University of Oregon Director of Curriculum 1984­1989 Department of Biology

Oregon, University of

26

Daniel Perea | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases onOrganizationElectronic2005-2007Dan GabrielDanielDaniel Perea

27

Daniel Lee Cloyd named Counterintelligence Office  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FBI officer accepts LANL counterintelligence post November 10, 2010 Daniel Lee Cloyd named Counterintelligence Office leader LOS ALAMOS, New Mexico, November 10, 2010-Daniel Lee...

28

By Daniel Poneman  

Broader source: Energy.gov (indexed) [DOE]

within four decades. Conservatively, that means more than 3 trillion worth of solar panels will need to be manufactured - a vast economic and employment opportunity to...

29

Daniel Perea | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOffice ofINL is a U.S.11-26-20131 10 150DanDaniel

30

Daniel Yergin | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases onOrganizationElectronic2005-2007Dan GabrielDanielDanielDaniel

31

Daniel Lopez | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases onOrganizationElectronic2005-2007Dan GabrielDaniel HaskelDaniel

32

Daniel Sedhom, 2012 Marigat, Kenya  

E-Print Network [OSTI]

Daniel Sedhom, 2012 Marigat, Kenya The calendar turned to May 28 th , 2011, a day that would mark different from anywhere I have seen or even imagined before. Marigat, Kenya became my home for the next six the opportunity to visit this wonderful place. #12;I spent my time in Marigat, Kenya at a compound which consisted

33

Daniel Hoag Named NNSA Production Office Deputy Manager | National...  

National Nuclear Security Administration (NNSA)

Production Office Deputy Manager Daniel Hoag Named NNSA Production Office Deputy Manager OAK RIDGE, Tenn. - Daniel Hoag has been named deputy manager for the National Nuclear...

34

Senate Confirms DOE Nominees Daniel Poneman, David Sandalow,...  

Broader source: Energy.gov (indexed) [DOE]

Confirms DOE Nominees Daniel Poneman, David Sandalow, Kristina Johnson, Steve Koonin, Scott Harris, and Ines Triay Senate Confirms DOE Nominees Daniel Poneman, David Sandalow,...

35

Sean Colbert-Kelly and Daniel Phillips  

E-Print Network [OSTI]

Analysis of a Ginzburg-Landau Type Energy. Model for Smectic C* Liquid Crystals with. Defects. Sean Colbert-Kelly and Daniel Phillips. Abstract. This work

2012-12-27T23:59:59.000Z

36

Daniel Boff | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Deliciouscritical_materials_workshop_presentations.pdfSTD-1040-93Decemberof EnergySeptemberandofDaniel Boff About

37

Manufacturing technologies  

SciTech Connect (OSTI)

The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

NONE

1995-09-01T23:59:59.000Z

38

Manufacturing technology  

SciTech Connect (OSTI)

The specific goals of the Manufacturing Technology thrust area are to develop an understanding of fundamental fabrication processes, to construct general purpose process models that will have wide applicability, to document our findings and models in journals, to transfer technology to LLNL programs, industry, and colleagues, and to develop continuing relationships with industrial and academic communities to advance our collective understanding of fabrication processes. Advances in four projects are described here, namely Design of a Precision Saw for Manufacturing, Deposition of Boron Nitride Films via PVD, Manufacturing and Coating by Kinetic Energy Metallization, and Magnet Design and Application.

Blaedel, K.L.

1997-02-01T23:59:59.000Z

39

Daniel Wildcat | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005Department ofDOE AccidentWaste Isolation Pilotat4DoublesDaniel Wildcat

40

Daniel Wood | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005Department ofDOE AccidentWaste Isolation Pilotat4DoublesDaniel

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Daniel Adams | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOE Theory9-9260-2003October 02,(JulyWebinar: IRSofDan ReicherDaniel

42

Daniel Wood | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOE Theory9-9260-2003October 02,(JulyWebinar: IRSofDanDaniel Wood

43

Additive Manufacturing: Implications on Research and Manufacturing  

E-Print Network [OSTI]

Additive Manufacturing: Implications on Research and Manufacturing With recent developments, etc.), additive manufacturing (AM) has the potential to become a transformative technology in innovation-based manufacturing. Agencies such as the Department of Defense, the National Science Foundation

Crawford, T. Daniel

44

Professor David Archer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16Hamada wins Gerald Hahn Quality andTerminalEMC2Human

45

Video Visualization Gareth Daniel Min Chen  

E-Print Network [OSTI]

Video Visualization Gareth Daniel Min Chen University of Wales Swansea, UK Abstract Video data, generated by the entertainment industry, security and traffic cameras, video conferencing systems, video a novel methodology for "summarizing" video sequences using volume visualization techniques. We outline

Grant, P. W.

46

Fuel Cell Manufacturing: American Energy and Manufacturing Competitive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit Presentation on...

47

Green Manufacturing  

SciTech Connect (OSTI)

Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

Patten, John

2013-12-31T23:59:59.000Z

48

Daniel Hoag Named Y-12 Site Office Deputy Manager | National...  

National Nuclear Security Administration (NNSA)

Named Y-12 Site Office Deputy Manager Daniel hoag named y-12 site office deputy manager. OAK RIDGE, Tenn. -- Daniel K. Hoag has been named Deputy Manager for the National Nuclear...

49

Surface light fields for 3D photography Daniel N. Wood  

E-Print Network [OSTI]

Surface light fields for 3D photography Daniel N. Wood A dissertation submitted in partial This is to certify that I have examined this copy of a doctoral dissertation by Daniel N. Wood and have found for 3D photography by Daniel N. Wood Chair of Supervisory Committee: Associate Professor Brian L

Washington at Seattle, University of

50

Universal Microfluidic Gradient Generator Daniel Irimia1  

E-Print Network [OSTI]

Universal Microfluidic Gradient Generator Daniel Irimia1 , Dan A Geba2 , Mehmet Toner1 1 Bio, Building 114, 16th St, Charlestown, MA 02129. Email: mtoner@hms.harvard.edu Keywords: microfluidics cells in vitro. While microfluidic devices have shown unmatched capability in generating linear stable

Geba, Dan-Andrei

51

Alec Jacobson1! Daniele Panozzo2!  

E-Print Network [OSTI]

Alec Jacobson1! Daniele Panozzo2! Oliver Glauser2! Cédric Pradalier3! Otmar Hilliges2! Olga Sorkine! #12;...but in general our software fixes disparities! 29! #12;30! #12;We can match skeletons;Acknowledgements...! · Ladislav Kavan · Gilles Caprari (gctronic.com) · Marco Attene's MESHFIX · Olga Diamanti

Grinspun, Eitan

52

Michael Hahn Daniel Wolf Savin (Columbia)  

E-Print Network [OSTI]

Michael Hahn Columbia University #12;Daniel Wolf Savin (Columbia) Enrico Landi (Michigan) NSF Solar. (2007) #12;#12; Only 0.01% of Sun's energy output required. Energy source is fluid motion in outer convection zone. #12;G-band 4305.6+/- 10.8 Ă? #12; Only 0.01% of Sun's energy output required. Energy source

Columbia University

53

Absorption Coefficients and Impedance Daniel A. Russell  

E-Print Network [OSTI]

1 Absorption Coefficients and Impedance Daniel A. Russell Science and Mathematics Department will measure the absorption coefficients and acoustic impedance of samples of acoustic absorbing materials material is responsible for almost 50% of sound absorption inside an automobile). The reverberation time

Russell, Daniel A.

54

Gladys Wright Compiled by Laurenda Daniells (1980)  

E-Print Network [OSTI]

Gladys Wright fonds Compiled by Laurenda Daniells (1980) University of British Columbia Archives Gladys Wright fonds. ­ 1923, 1980. 13 cm of textual materials. Biographical Sketch Gladys Wright (nee and Content Fonds consists of a hand-written account of Gladys Wright's memories of the UBC Fairview campus

Handy, Todd C.

55

Advanced Manufacturing | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Better Buildings, Better Plants Clean Energy Manufacturing Initiative Combined Heat and Power Innovative Manufacturing Initiative National Network for Manufacturing Innovation...

56

Manufacturing Battle Creek  

E-Print Network [OSTI]

Computer simulation Facilities design Finite element analysis Green manufacturing Industrial materialsManufacturing Research Center Kalamazoo Battle Creek The College of Engineering and Applied Sciences The Supporting manufacturing industries by providing opportunities for collaboration with faculty

de Doncker, Elise

57

Metrics for Sustainable Manufacturing  

E-Print Network [OSTI]

a system or process in maintaining a sustainable level of afor manufacturing processes to achieve truly sustainablesustainable phase of the automobile manufacturing process

Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

2008-01-01T23:59:59.000Z

58

Preliminary Notice of Violation, Fluor Daniel Fernald Corporation...  

Broader source: Energy.gov (indexed) [DOE]

July 29, 1997 Issued to Fluor Daniel Fernald Corporation related to Corrective Actions Implementation Deficiencies at the Fernald Environmental Management Project, (EA-97-05) On...

59

Sparser JohnsonLindenstrauss Transforms Daniel M. Kane # Jelani Nelson +  

E-Print Network [OSTI]

Sparser Johnson­Lindenstrauss Transforms Daniel M. Kane # Jelani Nelson + Abstract We give two di up applications where # 2 dimensionality reduction is used. 1 Introduction The Johnson

Chen, Yiling

60

THE LAW OF VECTOR FIELDS Daniel H. Gottlieb  

E-Print Network [OSTI]

DANIEL H. GOTTLIEB What do I mean ? Look at the example of Newton's Law of Gravitation. HereTHE LAW OF VECTOR FIELDS Daniel H. Gottlieb 1. Introduction. When I was 13, the intellectual world. Something fantastically beautiful. This something is the existence of a few general laws or principles which

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

THE LAW OF VECTOR FIELDS Daniel H. Gottlieb  

E-Print Network [OSTI]

;2 DANIEL H. GOTTLIEB What do I mean ? Look at the example of Newton's Law of Gravitation. Here THE LAW OF VECTOR FIELDS Daniel H. Something fantastically beautiful. This something is the existence of a few general laws or principles which

62

Zugriff auf Firebird-Datenbanken mit PHP Daniel de West  

E-Print Network [OSTI]

Zugriff auf Firebird-Datenbanken mit PHP Daniel de West DB-Campus-Treffen 15. Januar 2004 #12;15.01.04 daniel.de.west@rrze.uni-erlangen.de 2Firebird-Zugriff mit PHP Inhalt PHP und Firebird Die wichtigsten von Stored Procedures mit und ohne Ergebnis Ă?berblick ĂĽber Interbase/Firebird-Befehle in PHP

Fiebig, Peter

63

RRR Niobium Manufacturing Experience  

SciTech Connect (OSTI)

ATI Wah Chang has been manufacturing RRR niobium for more than 30 years using electron beam melting techniques. Fabricated forms include plate, sheet, foil, bar, rod and tubing. This paper provides manufacturing information.

Graham, Ronald A. [ATI Wah Chang, An Allegheny Technologies Company, Albany, Oregon 97321 (United States)

2007-08-09T23:59:59.000Z

64

Metrics for Sustainable Manufacturing  

E-Print Network [OSTI]

for implementing green manufacturing”. Trans. of NAMRI/SME,the imple- mentation of green manufacturing, where a wedgemanufacturing scope of the assessment. While it is always important in the development of green

Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

2008-01-01T23:59:59.000Z

65

Daniel C. Tobin | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA, GA - U.S. DepartmenttoJune 16,AprilFrank G. Klotz39AofDaniel C. Tobin

66

Daniel Lee Cloyd named Counterintelligence Office  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases onOrganizationElectronic2005-2007Dan GabrielDaniel Haskel

67

Hollings Manufacturing Extension Partnership: Delivering Measurable Results to Manufacturing Clients  

E-Print Network [OSTI]

of services, from innovation strategies to process improvements to green manufacturing. MEP also worksHollings Manufacturing Extension Partnership: Delivering Measurable Results to Manufacturing Clients MEP · MANUFACTURING EXTENSION PARTNERSHIP NationalInstituteofStandardsandTechnology March2013

Perkins, Richard A.

68

Development of Statistical Energy Analysis Tools for Toyota Motor Engineering & Manufacturing  

E-Print Network [OSTI]

Development of Statistical Energy Analysis Tools for Toyota Motor Engineering & Manufacturing Duke University | Bass Connections in Energy IETC | May 21, 2014 Jason Chen, Robert Collins, Gary Gao, Daniel Schaffer, Jill Wu ESL-IE-14...-05-06 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 Presentation Agenda ? Project introduction and goals ? Duke team’s energy consumption models ? Analysis of Toyota’s current consumption model ? Duke vs...

Chen, J; Collins, Ro.; Gao, G.; Schaffer, D.; Wu, J.

2014-01-01T23:59:59.000Z

69

Breaking ECC2K-130 Daniel V. Bailey1,10, Lejla Batina2, Daniel J. Bernstein3, Peter Birkner4, Joppe W. Bos5,  

E-Print Network [OSTI]

Breaking ECC2K-130 Daniel V. Bailey1,10, Lejla Batina2, Daniel J. Bernstein3, Peter Birkner4, Joppe, CH-1015 Lausanne, Switzerland {joppe.bos, thorsten.kleinjung}@epfl.ch 6 Academia Sinica, Taiwan {kc

Bernstein, Daniel

70

Enabling Manufacturing Research through Interoperability  

E-Print Network [OSTI]

sustainable or environmentally benign manufacturing processes andAND SUSTAINABLE FIGURE 8: LIFE-CYCLE OF MANUFACTURING PROCESSES (

Dornfeld, David; Wright, Paul; Helu, Moneer; Vijayaraghavan, Athulan

2009-01-01T23:59:59.000Z

71

BY BRUCE PITTMAN & DR. DANIEL J. RASKY COTS Capabilities Concept.  

E-Print Network [OSTI]

Developing Cislunar Space Using the COTS Mo BY BRUCE PITTMAN & DR. DANIEL J. RASKY del COTS criterion for awarding the agreements and held the companies to a firm acceptance assessment

72

Cartwright on Causality: Methods, Metaphysics, and Modularity Daniel Steel  

E-Print Network [OSTI]

Cartwright on Causality: Methods, Metaphysics, and Modularity Daniel Steel Department of Philosophy 503 S Kedzie Hall Michigan State University East Lansing, MI 48824-1032 USA Email: steel@msu.edu #12

Steel, Daniel

73

Inductive Rules, Background Knowledge, and Skepticism Daniel Steel  

E-Print Network [OSTI]

Inductive Rules, Background Knowledge, and Skepticism Daniel Steel Department of Philosophy 503 S. Kedzie Hall Michigan State University East Lansing, MI 48823-1032 Email: steel@msu.edu #12;Abstract

Steel, Daniel

74

Must a Bayesian Accept the Likelihood Principle? Daniel Steel  

E-Print Network [OSTI]

Must a Bayesian Accept the Likelihood Principle? Daniel Steel Department of Philosophy 503 S. Kedzie Hall Michigan State University East Lansing, MI 48824-1032 Email: steel@msu.edu #12;1 1

Fitelson, Branden

75

WEIGHT FILTRATIONS VIA COMMUTING AUTOMORPHISMS Daniel R. Grayson  

E-Print Network [OSTI]

. Primary 19E20. Supported by NSF grant DMS 90­02715. I thank Tom Goodwillie, Stephen Lichtenbaum, Friedhelm Waldhausen, Steven Landsburg, and Stephen Ullom for useful discussions and ideas. 1 #12; 2 DANIEL R. GRAYSON

76

WEIGHT FILTRATIONS VIA COMMUTING AUTOMORPHISMS Daniel R. Grayson  

E-Print Network [OSTI]

90-02715. I thank Tom Goodwillie, Stephen Lichtenbaum, Friedhelm Waldhausen, Steven Landsburg, and Stephen Ullom for useful discussions and ideas. 1 #12;2 DANIEL R. GRAYSON nonvanishing homotopy group

77

Sparser Johnson-Lindenstrauss Transforms Daniel M. Kane  

E-Print Network [OSTI]

Sparser Johnson-Lindenstrauss Transforms Daniel M. Kane Jelani Nelson Abstract We give two The Johnson-Lindenstrauss lemma states: Lemma 1 (JL Lemma [21]). For any integer d > 0, and any 0

Chen, Yiling

78

Plasticity of Dendritic Excitability Andreas Frick,* Daniel Johnstony  

E-Print Network [OSTI]

Plasticity of Dendritic Excitability Andreas Frick,* Daniel Johnstony Baylor College of Medicine function display plasticity under diverse circumstances such as neuromo- dulation, adaptation, learning­115, 2005 Keywords: intrinsic plasticity; synaptic plasticity; long- term potentiation (LTP); dendrite

Johnston, Daniel

79

Towards Agile Language Engineering Daniel A. Sadilek Markus Scheidgen  

E-Print Network [OSTI]

, the Agile Manifesto [7] defined principles for agile software development. Agile software development lies, software quality, and developer productivity. It pro- vides short iteration cycles, intensive userTowards Agile Language Engineering Daniel A. Sadilek Markus Scheidgen Guido Wachsmuth Stephan

Freytag, Johann-Christoph

80

VWC-0002- In the Matter of Daniel L. Holsinger  

Broader source: Energy.gov [DOE]

This case involves a complaint filed by Daniel Holsinger (Holsinger) under the Department of Energy (DOE) Contractor Employee Protection Program, 10 C.F.R. Part 708. The matter comes before me...

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

VBZ-0005- In the Matter of Fluor Daniel Fernald  

Broader source: Energy.gov [DOE]

This decision will consider a Motion to Dismiss Fluor Daniel Fernald (FDF) filed on September 7, 1999. FDF moves to dismiss a Complaint filed by Thomas W. Dwyer under the Department of Energy's ...

82

VWC-0001- In the Matter of Daniel L. Holsinger  

Broader source: Energy.gov [DOE]

This case involves a complaint filed by Daniel Holsinger (Holsinger) under the Department of Energy (DOE) Contractor Employee Protection Program, 10 C.F.R. Part 708. The matter comes before me...

83

Fluor Daniel Hanford contract standards/requirements identification document  

SciTech Connect (OSTI)

This document, the Standards/Requirements Identification Document (S/RID) for the Fluor Daniel Hanford Contract, represents the necessary and sufficient requirements to provide an adequate level of protection of the worker, public health and safety, and the environment.

Bennett, G.L.

1997-04-24T23:59:59.000Z

84

Locating Chicago Manufacturing  

E-Print Network [OSTI]

Renaissance Council, is among the nation's leading public high schools focused on manufac- turing area's econ- omy, including how important manufacturing is to that economy, which manufac- turing

Illinois at Chicago, University of

85

Advanced Materials Manufacturing | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

existing manufacturing industries and result in creative new products. Stronger, more corrosion-resistant and lower cost steel alloys are being developed and commercialized to...

86

Manufacturing | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the production of clean energy technologies like electric vehicles, LED bulbs and solar panels. The Department is also working with manufacturers to increase their energy...

87

Acoustics by additive manufacturing:.  

E-Print Network [OSTI]

??This study focuses on exploring the merging field of additive manufacturing and acoustics and introduces a new type of sound absorber which is regulating performance… (more)

Setaki, F.

2012-01-01T23:59:59.000Z

88

SSL Manufacturing Roadmap  

Broader source: Energy.gov [DOE]

Report detailing DOE Solid-State Lighting Program activities to accelerate manufacturing improvements that reduce costs and enhance the quality of SSL products.

89

Additive Manufacturing: Going Mainstream  

Broader source: Energy.gov [DOE]

Additive manufacturing, or 3D printing, is receiving attention from media, investment communities and governments around the world transforming it from obscurity to something to be talked about.

90

MANUFACTURING & SERVICE OPERATIONS MANAGEMENT  

E-Print Network [OSTI]

MANUFACTURING & SERVICE OPERATIONS MANAGEMENT Vol. 14, No. 4, Fall 2012, pp. 495­511 ISSN 1523 research directions, expanding upon the key points raised by Green [Green LV (2012) The vital role of operations analysis in improving healthcare delivery. Manufacturing Service Oper. Management 14

Boucherie, Richard J.

91

MANUFACTURING & SERVICE OPERATIONS MANAGEMENT  

E-Print Network [OSTI]

;Green and Soares: Note Manufacturing & Service Operations Management 9(1), pp. 54­61, © 2007 INFORMS 55MANUFACTURING & SERVICE OPERATIONS MANAGEMENT Vol. 9, No. 1, Winter 2007, pp. 54­61 issn 1523-Dependent Waiting Time Probabilities in M t /M/s t Queuing Systems Linda V. Green Graduate School of Business

Soares, JoĂŁo LuĂ­s Cardoso

92

Manufacturing Renaissance: Return of manufacturing to western countries.  

E-Print Network [OSTI]

??Manufacturing Renaissance, i.e. return of manufacturing to west, has been recently observed. This paper analyzes the patterns observed within each of the four main drivers… (more)

Kianian, Babak; Larsson, Tobias

2013-01-01T23:59:59.000Z

93

Molecular Life Science | Daniel Loos | loos@mls.uni-luebeck.de IM FOCUS DAS LEBEN  

E-Print Network [OSTI]

Was ist Molecular Life Science? Hämoglobin. Protein Data Bank: 1HHO #12;Daniel Loos Molecular Life Science

Lübeck, Universität zu

94

Manufacturing Licenses Available | Tech Transfer | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Deposition Manufacturing 201303127 Methods and Materials for Room Temperature Polymer Additive Manufacturing 201303140 Reactive Polymer Fused Deposition Manufacturing 201303151...

95

"Technology Wedges" for Implementing Green Manufacturing  

E-Print Network [OSTI]

issues in green design and manufacturing." ManufacturingFOR IMPLEMENTING GREEN MANUFACTURING David Dornfeld BerkeleyCalifornia KEYWORDS Green Manufacturing, Technology,

Dornfeld, David; Wright, Paul

2007-01-01T23:59:59.000Z

96

MDF | Manufacturing Demonstration Facility | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MDF Working with MDF NTRC OLCF SNS Titanium robotic hand holding sphere fabricated using additive manufacturing Home | User Facilities | MDF MDF | Manufacturing Demonstration...

97

CIMplementation™: Evaluating Manufacturing Automation  

E-Print Network [OSTI]

management and labor. In the new shop, ma~? agers will be unable to succeed unless thet earn the respect and cooperation of their I subordinates. Managers need to address th~ fear and resistance of manufacturing emPlofees before and during a transition.... Managers are becoming more interested in these methods, but they should be aware that implementing them will be a slow, complex task. This technology will require changes in manufacturing organization. This paper discusses changes required...

Krakauer, J.

98

Advanced Manufacture of Reflectors  

Broader source: Energy.gov [DOE]

The Advance Manufacture of Reflectors fact sheet describes a SunShot Initiative project being conducted research team led by the University of Arizona, which is working to develop a novel method for shaping float glass. The technique developed by this research team can drastically reduce the time required for the shaping step. By enabling mass production of solar concentrating mirrors at high speed, this project should lead to improved performance and as much as a 40% reduction in manufacturing costs for reflectors made in very high volume.

99

ATS materials/manufacturing  

SciTech Connect (OSTI)

The Materials/Manufacturing Technology subelement is a part of the base technology portion of the Advanced Turbine Systems (ATS) Program. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. The projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single crystal airfoil manufacturing technologies, materials characterization, and technology information exchange. This paper presents highlights of the activities during the past year. 12 refs., 24 figs., 4 tabs.

Karnitz, M.A.; Wright, I.G.; Ferber, M.K. [and others

1997-11-01T23:59:59.000Z

100

Invertibility of Nonlinear Switched Systems Aneel Tanwani and Daniel Liberzon  

E-Print Network [OSTI]

Invertibility of Nonlinear Switched Systems Aneel Tanwani and Daniel Liberzon Abstract-- This article addresses the invertibility problem for switched nonlinear systems affine in controls. The problem and sufficient condition for a switched system to be invertible, which says that the subsystems should

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

1,1-Organodimetallics in Organic Synthesis Daniel Schmitt  

E-Print Network [OSTI]

-Aza-Claisen Versus Carbometalation #12;Four ­ Component Coupling with Zincated Hydrazone #12;Synthesis of Pyrroles1,1-Organodimetallics in Organic Synthesis Daniel Schmitt 1/24/08 #12;Introduction 1st reports Reactivity ­ Carbonyl Olefinaton #12;Takai's Method Applied to Natural Product Synthesis #12;One

Johnson, Jeff S.

102

User Requirements for Geospatial Provenance Daniel Garijo1  

E-Print Network [OSTI]

User Requirements for Geospatial Provenance Daniel Garijo1 , Yolanda Gil2 , and Andreas Harth3 1 dgarijo@fi.upm.es, gil@isi.edu, harth@kit.edu Abstract. The surge in availability of geospatial data sources, the increased use of crowdsourced maps and the advent of geospatial mashups have brought us

Gil, Yolanda

103

Challenges in Modeling Geospatial Provenance Daniel Garijo1  

E-Print Network [OSTI]

Challenges in Modeling Geospatial Provenance Daniel Garijo1 , Yolanda Gil2 , and Andreas Harth3 1 dgarijo@fi.upm.es, gil@isi.edu, harth@kit.edu Abstract. The surge in availability of geospatial data sources, the increased use of crowdsourced maps and the advent of geospatial mashups have brought us

Gil, Yolanda

104

More than words : a biography of Daniel Francis Burns  

E-Print Network [OSTI]

Daniel Francis Burns was born in Ireland in 1888 and immigrated to the United States in 1912. He married Mary O'Neill in 1923 and had a family of seven children. He worked as a police officer in the Boston Police Department ...

Burns, Matthew R. (Matthew Robert)

2005-01-01T23:59:59.000Z

105

Enterprise Modeling for Business Intelligence Daniele Barone1  

E-Print Network [OSTI]

Enterprise Modeling for Business Intelligence Daniele Barone1 , Eric Yu2 , Jihyun Won3 , Lei Jiang1. In this paper, we present a vision for BI that is driven by enterprise modeling. The Busi- ness Intelligence Model (BIM) aims to enable business users to conceptu- alize business operations and strategies

Toronto, University of

106

PREFETCHING RESULTS OF WEB SEARCHES Harry Foxwell Daniel A. Menasc  

E-Print Network [OSTI]

services. A user wishes to locate Web sites that match query keywords. A query term or phrase is entered advertising images and text. A search for a common term such as "dinosaur" may return tens of thousandsPREFETCHING RESULTS OF WEB SEARCHES Harry Foxwell Daniel A. Menascé Sun Microsystems Dept

Menascé, Daniel A.

107

The Personality of Popular Facebook Users Daniele Quercia  

E-Print Network [OSTI]

The Personality of Popular Facebook Users Daniele Quercia§ , Renaud Lambiotte , David Stillwell583@cam.ac.uk, jon.crowcroft@cl.cam.ac.uk ABSTRACT We study the relationship between Facebook (Extraversion) is also a predictor for number of Facebook contacts. We then test whether people who have many

Hand, Steven

108

Sparser JohnsonLindenstrauss Transforms Daniel M. Kane # Jelani Nelson +  

E-Print Network [OSTI]

Sparser Johnson­Lindenstrauss Transforms Daniel M. Kane # Jelani Nelson + Abstract We give two di#erent Johnson­Lindenstrauss distribu­ tions, each with column sparsity s = #(# -1 log(1/#)) and embedding be sampled from a seed of O(log(1/#) log d) uniform random bits. Some applications that use Johnson

Chen, Yiling

109

A Derandomized Sparse Johnson-Lindenstrauss Transform Daniel M. Kane  

E-Print Network [OSTI]

A Derandomized Sparse Johnson-Lindenstrauss Transform Daniel M. Kane Jelani Nelson Abstract Recent work of [Dasgupta-Kumar-Sarl´os, STOC 2010] gave a sparse Johnson-Lindenstrauss transform and left-Kane-Nelson, FOCS 2010]. 1 Introduction The Johnson-Lindenstrauss lemma states the following. Lemma 1 (JL Lemma [17

110

MATHEMATICAL MODELS OF PROTEIN FOLDING Daniel B. Dix  

E-Print Network [OSTI]

MATHEMATICAL MODELS OF PROTEIN FOLDING Daniel B. Dix Department of Mathematics University of South Carolina Abstract. We present an elementary introduction to the protein folding problem directed toward, and biological problem, protein folding can also be precisely formulated as a set of mathematics problems. We

Dix, Daniel B.

111

Seismic Volume Visualization for Horizon Extraction Daniel Patel  

E-Print Network [OSTI]

Seismic Volume Visualization for Horizon Extraction Daniel Patel Christian Michelsen Research¨oller § Institute of Computer Graphics and Algorithms, Vienna University of Technology, Austria ABSTRACT Seismic present a novel system for rapidly interpret- ing and visualizing seismic volumetric data. First we

112

Daniel T. Cox Professor, Coastal and Ocean Engineering Program  

E-Print Network [OSTI]

Daniel T. Cox Professor, Coastal and Ocean Engineering Program 202 Owen Hall School of Civil Reviewer: Applied Geography; Applied Ocean Research; Coastal Engineering; Coastal Engineering Journal of Engineering Mechanics; Journal of Geophysical Research ­ Ocean, Journal of Geophysical Research ­ Earth

Haller, Merrick

113

VIBRATION CONTROL IN A SMART BEAM Daniel R. Fay*  

E-Print Network [OSTI]

activity and nearby motorized equipment. In this case, disturbance is produced using a white noise signal for vibration suppression, stability augmentation, and noise reduction in beam-like aerodynamic surfacesVIBRATION CONTROL IN A SMART BEAM Daniel R. Fay* Widener University, Chester, Pennsylvania Abstract

Patil, Mayuresh

114

Can Power ever be safe? Daniel 7:9-14  

E-Print Network [OSTI]

1 Can Power ever be safe? Daniel 7:9-14 Matthew 28 Stalin appears to Putin in a dream. "Uncle Joe me!" says Putin. "First, you must execute the entire government, and then secondly, you must paint the walls of the Kremlin blue." Putin: "Why blue?" Stalin: "Hmm. I had a feeling that would be the one youd

Capdeboscq, Yves

115

Volcanic rifting at Martian grabens Daniel Me`ge,1  

E-Print Network [OSTI]

Volcanic rifting at Martian grabens Daniel Me`ge,1 Anthony C. Cook,2,3 Erwan Garel,4 Yves: Solar System Objects: Mars; 8121 Tectonophysics: Dynamics, convection currents and mantle plumes; 8010: Me`ge, D., A. C. Cook, E. Garel, Y. Lagabrielle, and M.-H. Cormier, Volcanic rifting at Martian

Mege, Daniel

116

COPPER--2000 23.1 By Daniel L. Edelstein  

E-Print Network [OSTI]

discovered copper resource in the United States was estimated to be 350 Mt. U.S. copper smelter and refineryCOPPER--2000 23.1 COPPER By Daniel L. Edelstein Domestic survey data and tables were prepared. In 2000, mine production of recoverable copper in the United States continued its downward slide

117

COPPER--1998 22.1 By Daniel L. Edelstein  

E-Print Network [OSTI]

industrial demand. Lower copper prices and closure of a secondary copper smelter during the year led to lowerCOPPER--1998 22.1 COPPER By Daniel L. Edelstein Domestic survey data and tables were prepared of recoverable copper in the United States reversed its decade-long upward trend, declining by about 80

118

COPPER--2003 21.1 By Daniel L. Edelstein  

E-Print Network [OSTI]

% of primary refined copper production. The United States was fifth in world smelter production and fellCOPPER--2003 21.1 COPPER By Daniel L. Edelstein Domestic survey data and tables were prepared copper products; one of the refineries operated for only a portion of the year. Scrap was also consumed

119

Bio-Manufacturing: A Strategic clean energy manufacturing opportunity  

Broader source: Energy.gov [DOE]

Breakout Session 1: New Developments and Hot Topics Session 1-A: Biomass and the U.S. Competitive Advantages for Manufacturing Clean Energy Products Libby Wayman, Director, EERE Clean Energy Manufacturing Initiative

120

Additive Manufacturing for Fuel Cells  

Office of Energy Efficiency and Renewable Energy (EERE)

Blake Marshall, AMO's lead for Additive Manufacturing Technologies, will provide an overview of current R&D activities in additive manufacturing and its application to fuel cell prototyping and...

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Bolt Manufacture: Process Selection  

E-Print Network [OSTI]

file · Selective Laser Sintering (SLS) 3 D P i ti· 3-D Printing · Light Engineered Net Shaping (LENS Processes and Systems Prof. J.S. Colton © GIT 2009 20 #12;3D Printing Process (Soligen) ME 6222: Manufacturing Processes and Systems Prof. J.S. Colton © GIT 2009 21 #12;3D Printing Head (Soligen)3D Printing

Colton, Jonathan S.

122

Manufacturing High Temperature Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department of Energy Low-TemperatureEnergyAll ManufacturingFoodOctoberto DOE

123

Manufacturing Success Stories  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: AlternativeEnvironment, SafetyWater ConservationDepartmentEnergy Manufacturing Energy6

124

Manufacturing Tech Team | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Tech Team Manufacturing Tech Team Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Industrial efficiency and low-cost energy...

125

Leveraging Manufacturing for a Sustainable Future  

E-Print Network [OSTI]

for Implementing Green Manufacturing”, NAMRI Trans. , 35,Strategies for Green Manufacturing,” Proc. 4th CIRPAnd, in specific green manufacturing? This will depend on

Dornfeld, David

2011-01-01T23:59:59.000Z

126

Sustainable Manufacturing – Greening Processes, Systems and Products  

E-Print Network [OSTI]

Strategies for Green Manufacturing, " Proceedings HighFH), Implementing green manufacturing, as the first stepASME, Evanston, IL, Green Manufacturing uk/sustainability/

Dornfeld, David

2010-01-01T23:59:59.000Z

127

Appropriate use of Green Manufacturing Frameworks  

E-Print Network [OSTI]

for Implementing Green Manufacturing,” Trans. North AmericanAppropriate use of Green Manufacturing Frameworks C. Reich-for sustainable or green manufacturing systems and products,

Reich-Weiser, Corinne; Vijayaraghavan, Athulan; Dornfeld, David

2010-01-01T23:59:59.000Z

128

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

for implementing green manufacturing,” Trans. North AmericaStrategies for Green Manufacturing,” Proc. of the 4th CIRPAppropriate Use of Green Manufacturing Frameworks,” Proc. of

Linke, Barbara; Huang, Yu-Chu; Dornfeld, David

2012-01-01T23:59:59.000Z

129

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

Operation Strategies for Green Manufacturing, Proceedings ofSymposium on Green Manufacturing and Applications (ISGMAfor implementing green manufacturing. Transactions of NAMRI/

Linke, Barbara; Dornfeld, David; Huang, Yu-Chu

2011-01-01T23:59:59.000Z

130

Innovative Manufacturing Initiative Recognition Day, Advanced...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Publications Innovative Manufacturing Initiative Recognition Day Advanced Manufacturing Office Overview Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry...

131

Precision and Energy Usage for Additive Manufacturing  

E-Print Network [OSTI]

Sustainability of additive manufacturing: measuring theCommittee F42 on Additive Manufacturing Technologies," TheASTM Committee F42 on Additive Manufacturing Technologies. -

Clemon, Lee; Sudradjat, Anton; Jaquez, Maribel; Krishna, Aditya; Rammah, Marwan; Dornfeld, David

2013-01-01T23:59:59.000Z

132

Leveraging Manufacturing for a Sustainable Future  

E-Print Network [OSTI]

2010): “Sustainable Manufacturing – Greening Processes,processes and systems) can play in creating a sustainablesustainable manufacturing as “the creation of manufacturing products that use materials and processes

Dornfeld, David

2011-01-01T23:59:59.000Z

133

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

D. , “Sustainable Manufacturing - Greening Processes,Avoid) Increase process efficiency Most sustainable (Improvesustainable manufacturing. 2 They highlighted research needs in four categories: i) manufacturing processes and

Linke, Barbara; Huang, Yu-Chu; Dornfeld, David

2012-01-01T23:59:59.000Z

134

Sustainable Manufacturing – Greening Processes, Systems and Products  

E-Print Network [OSTI]

mittels Sustainable Manufacturing - Greening Processes,Sustainable for manufacturing Manufacturing Cambridge, accessed processes,processes due to energy awareness and environmental consciousness create many opportunities for sustainable

Dornfeld, David

2010-01-01T23:59:59.000Z

135

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

D. , Sustainable Manufacturing – Greening Processes, Systemsor impact low Most  sustainable Increase process efficiencysustainable manufacturing [1]. They highlighted research needs in four categories: i) manufacturing processes and

Linke, Barbara; Dornfeld, David; Huang, Yu-Chu

2011-01-01T23:59:59.000Z

136

E-Print Network 3.0 - associate editors daniel Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

is an integrated development Source: Liang, Y. Daniel - School of Computing, Armstrong Atlantic State University Collection: Computer Technologies and Information Sciences...

137

Daniel Cohen Assistant General Counsel for Legislation and Regulatory Law  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Deliciouscritical_materials_workshop_presentations.pdfSTD-1040-93Decemberof EnergySeptemberandofDaniel Boff About2,

138

Daniel Cohen Assistant General Counsel for Legislation and Regulatory Law  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Deliciouscritical_materials_workshop_presentations.pdfSTD-1040-93Decemberof EnergySeptemberandofDaniel Boff

139

Hollings Manufacturing Extension Partnership: A Commercialization Collaborator  

E-Print Network [OSTI]

to process improvements to green manufacturing. MEP also works with partners at the state and federal levelsHollings Manufacturing Extension Partnership: A Commercialization Collaborator MEP · MANUFACTURING to successfully commercialize federal technologies #12;The Manufacturing Extension Partnership

Perkins, Richard A.

140

Posted 10/18/11 MANUFACTURING ENGINEER  

E-Print Network [OSTI]

manufacturing processes in our Metal Fabrication and Assembly departments. Additional responsibilities includePosted 10/18/11 MANUFACTURING ENGINEER Kenall Manufacturing Gurnee, IL Kenall, a leading manufacturer of advanced lighting solutions for specialized environments, has exceptional opportunities

Heller, Barbara

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Seminar Title: Additive Manufacturing Advanced Manufacturing of Polymer and Composite Components  

E-Print Network [OSTI]

Seminar Title: Additive Manufacturing ­ Advanced Manufacturing of Polymer and Composite Components Functionally Integrated Composite Structures, Augsburg, Germany ME Faculty Candidate Abstract: Additive Manufacturing ­ Advanced Manufacturing of Polymer and Composite Components Additive manufacturing technologies

Wisconsin at Madison, University of

142

Manufacturing Demonstration Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and InterfacesAdministrationManufacturing - GE Appliances, ORNL

143

Industrial Scale Demonstration of Smart Manufacturing Achieving...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains Industrial Scale Demonstration of Smart Manufacturing Achieving...

144

Industrial Scale Demonstration of Smart Manufacturing Achieving...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Scale Demonstration of Smart Manufacturing Achieving Transformational Energy Productivity Gains Development of an Open Architecture, Widely Applicable Smart Manufacturing...

145

Final Report - Energy Reduction and Advanced Water Removal via Membrane Solvent Extraction Technology  

SciTech Connect (OSTI)

3M and Archer Daniels Midland (ADM) collaborated with the U.S. Department of Energy (DOE) to develop and demonstrate a novel membrane solvent extraction (MSE) process that can substantially reduce energy and water consumption in ethanol production, and accelerate the fermentation process. A cross-flow membrane module was developed, using porous membrane manufactured by 3M. A pilot process was developed that integrates fermentation, MSE and vacuum distillation. Extended experiments of 48-72 hours each were conducted to develop the process, verify its performance and begin establishing commercial viability.

Reed, John; Fanselow, Dan; Abbas, Charles; Sammons, Rhea; Kinchin, Christopher

2014-08-06T23:59:59.000Z

146

Manufacturing and Design Online by the SEAS  

E-Print Network [OSTI]

, & Analysis (Instructor: Prof. R. Gadh) 3. MAE 171B. Digital Control of Physical Systems (Instructor: Prof. T Daniel Yang Rajit Gadh T-C. Tsao Nasr Ghoniem Greg Carman J.-M. Yang

Jalali. Bahram

147

Book chapters 1. Gianluca Coletti, Daniel Macdonald and Deren Yang, Chapter 3, "Role of impurities in solar  

E-Print Network [OSTI]

Book chapters 1. Gianluca Coletti, Daniel Macdonald and Deren Yang, Chapter 3, "Role of impurities. Published by Wiley (2012). 2. Andres Cuevas, Daniel Macdonald and Ronald A. Sinton, Chapter III-1 Castañer. Published by Elsevier, Oxford (2011). Journal articles 1. Daniel Macdonald, Sieu Pheng Phang

148

Manufacturing consumption of energy 1994  

SciTech Connect (OSTI)

This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

NONE

1997-12-01T23:59:59.000Z

149

Manufacturing consumption of energy 1991  

SciTech Connect (OSTI)

This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

Not Available

1994-12-01T23:59:59.000Z

150

PLEASE SCROLL DOWN FOR ARTICLE This article was downloaded by: [Rivera, Daniel E.  

E-Print Network [OSTI]

change J.-Emeterio Navarro-Barrientosa ; Daniel E. Riveraa ; Linda M. Collinsb a Control Systems Navarro-Barrientos, J.-Emeterio , Rivera, Daniel E. and Collins, Linda M.(2011) 'A dynamical model for describing behavioural interventions for weight loss and body composition change J.-Emeterio Navarro

Contractor, Anis

151

ITP Nanomanufacturing: Nanomanufacturing Portfolio: Manufacturing...  

Energy Savers [EERE]

More Documents & Publications Sustainable Nanomaterials Workshop Advanced Manufacturing Office, U.S. Department of Energy Nanocomposite Materials for Lithium-Ion Batteries...

152

Manufacturing Spotlight: Boosting American Competitiveness  

Office of Energy Efficiency and Renewable Energy (EERE)

Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient.

153

Manufacturing Demonstration Facility Technology Collaborations...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

from industry to assess applicability of new technologies that can reduce manufacturing energy intensity or produce new, energy-efficient products. As part of the technology...

154

Gamesa and Daniel Alonso Group JV | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpen EnergyBoard" form. To create aGA SNCGTGalipDaniel Alonso

155

Design for manufacturability Design verification  

E-Print Network [OSTI]

ITRS Design #12;Design · Design for manufacturability · Design verification #12;Design for Manufacturability · Architecture challenges · Logic and circuit challenges · Layout and physical design challenges · Expected to be the source of multiple DFM challenges · Invest in variability reduction or design

Patel, Chintan

156

Petrick Technology Trends Of Manufacturing  

E-Print Network [OSTI]

#12;323 Petrick Technology Trends chapter 9 The Future Of Manufacturing Irene Petrick Technology Trends This chapter is a story about the future of manufacturing based on three predictions: · that firms sophisticated modeling and simulation of both new products and production processes; · that additive

157

Hollings Manufacturing Extension Partnership: A Commercialization Collaborator  

E-Print Network [OSTI]

of services, from innovation strategies to process improvements to green manufacturing. MEP also worksHollings Manufacturing Extension Partnership: A Commercialization Collaborator MEP · MANUFACTURING Manufacturing Extension Partnership (MEP) works with small and mid-sized U.S. manufacturers to help them create

158

Beryllium Manufacturing Processes  

SciTech Connect (OSTI)

This report is one of a number of reports that will be combined into a handbook on beryllium. Each report covers a specific topic. To-date, the following reports have been published: (1) Consolidation and Grades of Beryllium; (2) Mechanical Properties of Beryllium and the Factors Affecting these Properties; (3) Corrosion and Corrosion Protection of Beryllium; (4) Joining of Beryllium; (5) Atomic, Crystal, Elastic, Thermal, Nuclear, and other Properties of Beryllium; and (6) Beryllium Coating (Deposition) Processes and the Influence of Processing Parameters on Properties and Microstructure. The conventional method of using ingot-cast material is unsuitable for manufacturing a beryllium product. Beryllium is a highly reactive metal with a high melting point, making it susceptible to react with mold-wall materials forming beryllium compounds (BeO, etc.) that become entrapped in the solidified metal. In addition, the grain size is excessively large, being 50 to 100 {micro}m in diameter, while grain sizes of 15 {micro}m or less are required to meet acceptable strength and ductility requirements. Attempts at refining the as-cast-grain size have been unsuccessful. Because of the large grain size and limited slip systems, the casting will invariably crack during a hot-working step, which is an important step in the microstructural-refining process. The high reactivity of beryllium together with its high viscosity (even with substantial superheat) also makes it an unsuitable candidate for precision casting. In order to overcome these problems, alternative methods have been developed for the manufacturing of beryllium. The vast majority of these methods involve the use of beryllium powders. The powders are consolidated under pressure in vacuum at an elevated temperature to produce vacuum hot-pressed (VHP) blocks and vacuum hot-isostatic-pressed (HIP) forms and billets. The blocks (typically cylindrical), which are produced over a wide range of sizes (up to 183 cm dia. by 61 cm high), may be cut or machined into parts or be thermomechanically processed to develop the desired microstructure, properties, and shapes. Vacuum hot-isostatic pressing and cold-isostatic pressing (CIP) followed by sintering and possibly by a final HIP'ing (CIP/Sinter/HIP) are important in their use for the production of near net-shaped parts. For the same starting powder, a HIP'ed product will have less anisotropy than that obtained for a VHP'ed product. A schematic presentation illustrating the difference between VHP'ing and HIP'ing is shown in Figure I-1. The types of powders and the various beryllium grades produced from the consolidated powders and their ambient-temperature mechanical properties were presented in the consolidation report referred to above. Elevated-temperature properties and the effect of processing variables on mechanical properties are described in the mechanical properties report. Beryllium can also be deposited as coatings as well as freestanding forms. The microstructure, properties, and various methods used that are related to the deposition of beryllium are discussed in the report on beryllium coatings.

Goldberg, A

2006-06-30T23:59:59.000Z

159

MANUFACTURING ACCELERATING THE INCORPORATION OF MATERIALS  

E-Print Network [OSTI]

MANUFACTURING ACCELERATING THE INCORPORATION OF MATERIALS ADVANCES INTO MANUFACTURING PROCESSES NATIONAL NEED The proposed topic "Accelerating the Incorporation of Materials Advances into Manufacturing organizations, leading researchers from academic institutions, and others. Materials performance is often

Magee, Joseph W.

160

Advanced Manufacture of Reflectors  

SciTech Connect (OSTI)

The main project objective has been to develop an advanced gravity sag method for molding large glass solar reflectors with either line or point focus, and with long or short focal length. The method involves taking standard sized squares of glass, 1.65 m x 1.65 m, and shaping them by gravity sag into precision steel molds. The method is designed for high volume manufacture when incorporated into a production line with separate pre-heating and cooling. The performance objectives for the self-supporting glass mirrors made by this project include mirror optical accuracy of 2 mrad root mean square (RMS), requiring surface slope errors <1 mrad rms, a target not met by current production of solar reflectors. Our objective also included development of new methods for rapidly shaping glass mirrors and coating them for higher reflectivity and soil resistance. Reflectivity of 95% for a glass mirror with anti-soil coating was targeted, compared to the present ~94% with no anti-soil coating. Our mirror cost objective is ~$20/m2 in 2020, a significant reduction compared to the present ~$35/m2 for solar trough mirrors produced for trough solar plants. During the first year a custom batch furnace was built to develop the method with high power radiative heating to simulate transfer of glass into a hot slumping zone in a production line. To preserve the original high polish of the float glass on both front and back surfaces, as required for a second surface mirror, the mold surface is machined to the required shape as grooves which intersect the glass at cusps, reducing the mold contact area to significantly less than 1%. The mold surface is gold-plated to reflect thermal radiation. Optical metrology of glass replicas made with the system has been carried out with a novel, custom-built test system. This test provides collimated, vertically-oriented parallel beams from a linear array of co-aligned lasers translated in a perpendicular direction across the reflector. Deviations of each reflected beam from the paraboloid focus give a direct measure of surface slope error. Key findings • A gravity sag method for large (2.5 m2) second surface glass solar reflectors has been developed and demonstrated to a uniquely high level of accuracy. Mirror surface slope accuracy of 0.65 mrad in one dimension, 0.85 mrad in 2 dimensions (point focus) has been demonstrated by commercial partner REhnu using this process. This accuracy exceeds by a factor of two current solar reflector accuracy. Our replicas meet the Sunshot accuracy objective of 2 mrad optical, which requires better than 1 mrad rms slope error. • Point-focus as well as line-focus mirrors have been demonstrated at 1.65 m x 1.65 m square – a unique capability. • The new process using simple molds is economical. The molds for the 1.65 m square reflectors are bent and machined steel plates on a counter-weighted flotation support. To minimize thermal coupling by radiative heat transfer, the mold surface is grooved and gilded. The molds are simple to manufacture, and have minimal thermal stresses and distortion in use. Lapping and bending techniques have been developed to obtain better than 1 mrad rms surface mold accuracy. Float glass is sagged into the molds by rapid radiative heating, using a custom high power (350 kW) furnace. The method of manufacture is well suited for small as well as large volume production, and as it requires little capital investment and no high technology, it could be used anywhere in the world to make solar concentrating reflectors. • A novel slope metrology method for full 1.65 aperture has been demonstrated, with 25 mm resolution across the face of the replicas. The method is null and therefore inherently accurate: it can easily be reproduced without high-tech equipment and does not need sophisticated calibration. We find by cross calibration with reference trough reflectors from RioGlass that our null-test laser system yields a measurement accuracy better than 0.4 mrad rms slope error. Our system is inexpensive and could have broad application for test

Angel, Roger [University of Arizona

2014-12-17T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Opportunities and Challenges to Sustainable Manufacturing and CMP  

E-Print Network [OSTI]

for Implementing Green Manufacturing,” Trans. North AmericanBoyd, S. , LMAS Green Manufacturing Research Presentation,MANUFACTURING AND GREEN MANUFACTURING Sustainability is

Dornfeld, David

2009-01-01T23:59:59.000Z

162

Additive Manufacturing Opportunities for Transportation | ornl...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Additive Manufacturing Opportunities for Transportation Mar 13 2015 10:00 AM - 11:00 AM Lonnie Love, Manufacturing Systems Research Group Transportation Science Seminar Series...

163

Clean Energy Manufacturing Initiative: Increasing American Competitive...  

Broader source: Energy.gov (indexed) [DOE]

for a Clean Energy Manufacturing Innovation Institute related to composite materials and structures. The Manufacturing Demonstration Facility at Oak Ridge National...

164

Advanced Manufacturing Initiative Improves Turbine Blade Productivity...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Advanced Manufacturing Initiative Improves Turbine Blade Productivity Advanced Manufacturing Initiative Improves Turbine Blade Productivity May 20, 2011 - 2:56pm Addthis This is an...

165

A Management Strategy for Additive Manufacturing:.  

E-Print Network [OSTI]

??The thesis is about a Management Strategy for Additive Manufacturing - how engineering change influences the NPD process through the adoption of new manufacturing technology.… (more)

Zahn, N.Z.

2014-01-01T23:59:59.000Z

166

National Electrical Manufacturers Association (NEMA) Response...  

Broader source: Energy.gov (indexed) [DOE]

Electrical Manufacturers Association (NEMA) Response to Smart Grid RFI National Electrical Manufacturers Association (NEMA) Response to Smart Grid RFI The National Electrical...

167

Additive Manufacturing Cluster Strategy | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Additive Manufacturing Cluster Strategy SHARE Additive Manufacturing Cluster Strategy As the nation's premier research laboratory, ORNL is one of the world's most capable resources...

168

Welcome and Advanced Manufacturing Partnership (Text Version...  

Broader source: Energy.gov (indexed) [DOE]

200 school aged students go into this manufacturing demonstration facility and make 3D printing or other manufacturing parts. Design and make parts for their robots. For their...

169

Mechanical and Manufacturing Engineering Mechatronics Engineering Minor  

E-Print Network [OSTI]

Mechanical and Manufacturing Engineering Mechatronics Engineering Minor Students pursuing a BSc in mechanical or manufacturing engineering have experience and entrepreneurship. Mechatronics is the synergistic combination of mechanical

Calgary, University of

170

Advanced Technology Vehicles Manufacturing Incentive Program...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program This is an interim final rule that establishes the...

171

Process systems engineering of continuous pharmaceutical manufacturing  

E-Print Network [OSTI]

Continuous manufacturing offers a number of operational and financial benefits to pharmaceutical companies. This research examines the critical blending step for continuous pharmaceutical manufacturing and the characteristics ...

Abel, Matthew J

2010-01-01T23:59:59.000Z

172

Understanding Manufacturing Energy and Carbon Footprints, October...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications Understanding the 2010 Manufacturing Energy and Carbon Footprints U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis U.S....

173

Manufacturing System Design Framework Manual  

E-Print Network [OSTI]

Previous Lean Aerospace Initiative research in factory operations had indicated that the greatest performance gains are realized when the manufacturing system is designed from the top down and from supplier to the customer. ...

Vaughn, Amanda

2002-01-01T23:59:59.000Z

174

Wind Energy Manufacturing Tax Incentive  

Broader source: Energy.gov [DOE]

With the passage of [http://www.arkansasenergy.org/media/261385/act736.pdf HB 2230 (2009)] in April 2009, the Arkansas Legislature expanded a tax incentive for manufacturers of windmill blades or...

175

iccs-archer | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to come. PAPERS AND PRESENTATIONS Sai Gollakota, Highlights of the DOE-Sponsored Major Carbon Sequestration Projects, Presented at the Association of Rural Electric Generating...

176

Lynden Archer > Marjorie L. Hart Chair  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fund Las ConchasTrail of a martian20085816 2.460Lye

177

PlanDirected Architectural Change For Autonomous Daniel Sykes, William Heaven, Jeff Magee, Jeff Kramer  

E-Print Network [OSTI]

Plan­Directed Architectural Change For Autonomous Systems Daniel Sykes, William Heaven, Jeff Magee, Jeff Kramer Department of Computing Imperial College London {das05, wjh00, j.magee, j

Leavens, Gary T.

178

Plan-Directed Architectural Change For Autonomous Daniel Sykes, William Heaven, Jeff Magee, Jeff Kramer  

E-Print Network [OSTI]

Plan-Directed Architectural Change For Autonomous Systems Daniel Sykes, William Heaven, Jeff Magee, Jeff Kramer Department of Computing Imperial College London {das05, wjh00, j.magee, j

Leavens, Gary T.

179

UNIVERSITY OF CALIFORNIA, BERKELEY ENERGY AND RESOURCES GROUP DANIEL M. KAMMEN  

E-Print Network [OSTI]

that this scenario includes all the likely available energy from local renewable resources UNIVERSITY OF CALIFORNIA, BERKELEY ENERGY AND RESOURCES GROUP DANIEL M OF CALIFORNIA PROFESSOR IN THE ENERGY AND RESOURCES GROUP BERKELEY, CA 94720

Kammen, Daniel M.

180

BY BRUCE PITTMAN & DR. DANIEL J. RASKY Spring 2013 AD ASTRA24  

E-Print Network [OSTI]

Developing Cislunar Space Using the COTS Model BY BRUCE PITTMAN & DR. DANIEL J. RASKY Spring 2013 criterion for awarding the agreements and held the companies to a firm acceptance assessment

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

A New Approach to Argument by Analogy: Extrapolation and Chain Graphs Daniel Steel  

E-Print Network [OSTI]

A New Approach to Argument by Analogy: Extrapolation and Chain Graphs Daniel Steel Department of Philosophy 503 S Kedzie Hall East Lansing, MI 48824-1032 steel@msu.edu #12;1. Introduction. In order to make

Steel, Daniel

182

Daniel A. Goldstein 501 Campbell Hall #3411 1 Cyclotron Road MS 50B-4206  

E-Print Network [OSTI]

Daniel A. Goldstein 501 Campbell Hall #3411 1 Cyclotron Road MS 50B-4206 Department of Astronomy., Brown, P.J., Finley, D. A., Fischer, J., Goldstein, D., et al. DES13S2cmm: The First Superluminous

Backer, Don

183

SPICE: Scalable P2P implicit group messaging Daniel Cutting a,*, Aaron Quigley b  

E-Print Network [OSTI]

SPICE: Scalable P2P implicit group messaging Daniel Cutting a,*, Aaron Quigley b , Bjo¨rn Landfeldt problem of such systems. This paper broadens our earlier work [D. Cutting, B. Landfeldt, A. Quigley

Landfeldt, Bjorn

184

FALL 2013 CAREER FAIR EMPLOYERS DAY TWO-THURSDAY, SEPTEMBER 19TH Agilis Engineering, Inc.  

E-Print Network [OSTI]

Megatrends, Inc. Archer Daniels Midland ARCO Design Asbury Automotive Ascend King Automation Koops, Inc. Lithko Contracting, Inc MassMutual South Carolina Remediation SC Department of Health and Human Services ScanSource Inc. Schaeffler

Duchowski, Andrew T.

185

Designing a National Network for Manufacturing Innovation  

E-Print Network [OSTI]

Designing a National Network for Manufacturing Innovation NNMI and The Additive Manufacturing Pilot Introduction · NNMI principles · Public NMMI Design · Pilot Institute on Additive Manufacturing #12;IMI Mission Process, such as Additive Manufacturing An Advanced Material ­ e.g. lightweight, low cost carbon fiber

186

Manufacturing Energy and Carbon Footprints (2006 MECS)  

Broader source: Energy.gov [DOE]

Energy and Carbon Footprints provide a mapping of energy from supply to end use in manufacturing. They show us where energy is used and lost—and where greenhouse gases (GHGs) are emitted. Footprints are available below for 15 manufacturing sectors (representing 94% of all manufacturing energy use) and for U.S. manufacturing as a whole. Analysis of these footprints is also available in the U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis report.

187

Ratcheting Motion of Liquid Drops on Gradient Surfaces Susan Daniel, Sanjoy Sircar, Jill Gliem, and Manoj K. Chaudhury*  

E-Print Network [OSTI]

Ratcheting Motion of Liquid Drops on Gradient Surfaces Susan Daniel, Sanjoy Sircar, Jill Gliem an interesting scenario when thedropissubjectedtoaperiodicforce.Likeaconventional ratchet, the periodic force

Chaudhury, Manoj K.

188

Manufacturing for the Hydrogen Economy Manufacturing Research & Development  

E-Print Network [OSTI]

to coordinate and leverage the current federal efforts focused on manufacturability issues such as low-cost of the hydrogen and fuel cell technologies needed to move the United States toward a future hydrogen economy of a hydrogen energy economy, moving from today's laboratory-scale fabrication technologies to high

189

Manufacturing Innovation in the DOE  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES7.pdfFuel2007Naval Reactors' Cyber SecurityManufacturingManufacturing

190

Sustainable Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing-Informed Design, April 2013  

Broader source: Energy.gov [DOE]

Sustainable Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing-Informed Design

191

Retinal Waves Are Governed by Collective Network Properties Daniel A. Butts,1 Marla B. Feller,2,3 Carla J. Shatz,2 Daniel S. Rokhsar1  

E-Print Network [OSTI]

Retinal Waves Are Governed by Collective Network Properties Daniel A. Butts,1 Marla B. Feller,2 produces spatially and temporally restricted waves without requiring in- hibition, consistent in several different regimes of wave behavior. We also present evidence that wave properties are locally

Butts, Daniel

192

Manufacturing Energy and Carbon Footprints  

E-Print Network [OSTI]

Significant opportunities exist for improving energy efficiency in U.S. manufacturing. A first step in realizing these opportunities is to identify how industry is using energy. Where does it come from? What form is it in? Where is it used? How much...

Brueske, S.; Lorenz, T.

2012-01-01T23:59:59.000Z

193

Process for manufacturing multilayer capacitors  

DOE Patents [OSTI]

The invention is directed to a method of manufacture of multilayer electrical components, especially capacitors, and components made by such a method. High capacitance dielectric materials and low cost metallizations layered with such dielectrics may be fabricated as multilayer electrical components by sintering the metallizations and the dielectrics during the fabrication process by application of microwave radiation.

Lauf, Robert J. (Oak Ridge, TN); Holcombe, Cressie E. (Knoxville, TN); Dykes, Norman L. (Oak Ridge, TN)

1996-01-01T23:59:59.000Z

194

Additive manufacturing method of producing  

E-Print Network [OSTI]

Additive manufacturing method of producing silver or copper tracks on polyimide film Problem/stripping) using an additive process support by a novel bio- degradable photo-initiator package. technology. Building on previous work by Hoyd- Gigg Ng et al. [1,2], Heriot-Watt has developed an additive film

Painter, Kevin

195

Heat treating of manufactured components  

DOE Patents [OSTI]

An apparatus for heat treating manufactured components using microwave energy and microwave susceptor material is disclosed. The system typically includes an insulating vessel placed within a microwave applicator chamber. A moderating material is positioned inside the insulating vessel so that a substantial portion of the exterior surface of each component for heat treating is in contact with the moderating material.

Ripley, Edward B. (Knoxville, TN)

2012-05-22T23:59:59.000Z

196

Systems, Inc. Manufacturing Program Manager  

E-Print Network [OSTI]

70819 #12;Advanced Energy Systems, Inc. Outline ·Introduction ·Accomplishments Phase I ·Technical Approach - Second Year ·Manufacturing Schedule Assessment -Top Level Phase II #12;Advanced Energy Systems Design and FEA of 5 cell RF Cavity, He Vessel, Power Coupler, & Cryostat -Interfaces to external piping

197

Remarks from Congressional Leaders: Congressman Daniel Lipinski (2011 EFRC Summit)  

ScienceCinema (OSTI)

Congressman Daniel Lipinski (D-Illinois) spoke during the opening session of the EFRC Summit. The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss "Science for our Nation's Energy Future." In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several ?grand challenges? and use-inspired ?basic research needs? recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

Lipinski, Daniel (Congressman, Illinois)

2012-03-14T23:59:59.000Z

198

DanielViviroli and RolfWeingartner Hydrology and Earth System Sciences, 8(6), 10161029 (2004) EGU  

E-Print Network [OSTI]

DanielViviroli and RolfWeingartner 1016 Hydrology and Earth System Sciences, 8(6), 10161029 (2004) © EGU The hydrological significance of mountains: from regional to global scale Daniel Viviroli and Rolf share of the worlds population with fresh water. Quantification of the hydrological significance

Paris-Sud XI, Université de

199

Artisan Manufacturing: Order (2010-CW-0712)  

Broader source: Energy.gov [DOE]

DOE ordered Artisan Manufacturing Company, Inc., to pay a $5,000 civil penalty after finding Artisan Manufacturing had failed to certify that certain models of faucets comply with the applicable water conservation standard.

200

Goodman Manufacturing: Order (2012-CE-1509)  

Broader source: Energy.gov [DOE]

DOE ordered Goodman Manufacturing Company L.P. to pay an $8,000 civil penalty after finding Goodman Manufacturing had failed to certify that certain room air conditioners comply with the applicable energy conservation standard.

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Goodman Manufacturing: Proposed Penalty (2011-SE-4301)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that Goodman Manufacturing manufactured and distributed noncompliant basic model CPC180* commercial package air conditioners in the U.S.

202

Manufacturing Metallic Parts with Designed Mesostructure  

E-Print Network [OSTI]

Additive Manufacturing Laser Engineered Net Shaping Electron Beam Melting Williams, C. B., F. M. Mistree, D Additive Manufacturing © Christopher B. Williams Electron Beam Melting Electron Beam Melting Direct Metal

203

Mechanics and Design, Manufacturing Professor Hani Naguib  

E-Print Network [OSTI]

Mechanical and Industrial Engineering Manufacturing What is Manufacturing? The transformation of materials. Apple Canada(Se12), Revenue: $5,067,109 9. CGI Group(Se12), Revenue: $4,786,857 10. Siemens Canada(Se12

204

Faculty Position in Mechanical Engineering Additive Manufacturing  

E-Print Network [OSTI]

using additive manufacturing in applications such as, but not limited to the net shape manufacture of) Promoting Well-Being, Finding Cures; (3) Building Communities, Expanding Opportunities; and (4) Harnessing

205

Montana Manufacturing Center www.mtmanufacturingcenter.com  

E-Print Network [OSTI]

Montana Manufacturing Center www.mtmanufacturingcenter.com University Technical Assistance Program and wellness industry. Commenting on the strategy, Chief Opera- tions Officer and Six Sigma Green Belt Brad achieve that. NLI offers premier manufacturing and laboratories services (www

Dyer, Bill

206

Objective assessment of manufacturing technology investments  

E-Print Network [OSTI]

Amgen is a biotechnology company with manufacturing plants throughout the world. New manufacturing technologies are constantly being developed and implemented in order to address cost, quality, regulation, and competitive ...

Rothman, Craig Jeremy

2012-01-01T23:59:59.000Z

207

Building Blocks for the Future of Manufacturing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for the Future of Manufacturing Building Blocks for the Future of Manufacturing Scott Smith 2011.05.04 Even though we grew up on opposite sides of the world, my colleague...

208

Mechanical and Manufacturing Engineering Petroleum Engineering Minor  

E-Print Network [OSTI]

of Chemical and Petroleum Engineering for their petroleum engineering minor. As well, mechanical engineeringMechanical and Manufacturing Engineering Petroleum Engineering Minor The Department of Mechanical and Manufacturing Engineering offers a minor in petroleum engineering within the mechanical engineering major

Calgary, University of

209

USA Manufacturing: Order (2013-CE-5336)  

Broader source: Energy.gov [DOE]

DOE ordered USA Manufacturing to pay a $8,000 civil penalty after finding USA Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

210

Benefits and Barriers of Smart Manufacturing  

E-Print Network [OSTI]

Decision makers in the industrial sector have only recently started to realize the potential of smart manufacturing to transform manufacturing. The potential gains in efficiency at the process and supply-chain level are still largely unknown...

Trombley, D.; Rogers, E.

2014-01-01T23:59:59.000Z

211

Refrigerator Manufacturers: Order (2013-CE-5341)  

Broader source: Energy.gov [DOE]

DOE ordered Refrigerator Manufacturers, LLC to pay a $8,000 civil penalty after finding Refrigerator Manufacturers had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

212

Clean Energy Manufacturing Initiative Industrial Efficiency and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial...

213

Webinar: Additive Manufacturing for Fuel Cells  

Broader source: Energy.gov [DOE]

Video recording and text version of the webinar titled "Additive Manufacturing for Fuel Cells," originally presented on February 11, 2014.

214

Electromagnetic compatibility in semiconductor manufacturing  

SciTech Connect (OSTI)

Electromagnetic Interference (EMI) causes problems in semiconductor manufacturing facilities that range from nuisances to major disruptions of production. In many instances, these issues are addressed in a reactionary rather than proactive manner by individuals who do not have the experience or the equipment necessary to combat EMI problems in a timely, cost effective manner. This approach leads to expensive retrofits, reduced equipment availability, long recovery times, and in some cases, line yield impacts. The goal of electromagnetic compatibility (EMC) in semiconductor manufacturing is to ensure that semiconductor process, metrology, and support equipment operate as intended without being affected by electromagnetic disturbances either transmitted through air (radiated interference), or transferred into the equipment via a conductive media (conducted interference). Rather than being neglected until serious issues arise, EMC should be considered in the early stages of facility design, in order to gain the most benefit at the lowest cost.

Montoya, J.A. [Intel Corp., Hillsboro, OR (United States)

1995-12-31T23:59:59.000Z

215

Manufacturing of Plutonium Tensile Specimens  

SciTech Connect (OSTI)

Details workflow conducted to manufacture high density alpha Plutonium tensile specimens to support Los Alamos National Laboratory's science campaigns. Introduces topics including the metallurgical challenge of Plutonium and the use of high performance super-computing to drive design. Addresses the utilization of Abaqus finite element analysis, programmable computer numerical controlled (CNC) machining, as well as glove box ergonomics and safety in order to design a process that will yield high quality Plutonium tensile specimens.

Knapp, Cameron M [Los Alamos National Laboratory

2012-08-01T23:59:59.000Z

216

Advanced Manufacturing | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTankless orA BRIEF HISTORY OFEnergyAdvanced Manufacturing

217

Manufacturing Perspective | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department of Energy Low-TemperatureEnergyAll ManufacturingFoodOctobertoPerspective

218

Sustainable Manufacturing via Multi-Scale, Physics-Based Process...  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing-Informed Design, April 2013 Sustainable Manufacturing via Multi-Scale, Physics-Based Process...

219

Machine Tool Design and Operation Strategies for Green Manufacturing  

E-Print Network [OSTI]

Operation Strategies for Green Manufacturing Nancy DIAZ 1 ,to implement green manufacturing in machining includingopportunities to green manufacturing exist at all levels of

2010-01-01T23:59:59.000Z

220

A Review of Engineering Research in Sustainable Manufacturing  

E-Print Network [OSTI]

SWOT Anal- ysis for Green Manufacturing Strategy Selection,”Yung, K. L. , 2010, “Green Manufacturing Using IntegratedDornfeld, D. , 2013, Green Manufacturing: Fundamentals and

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Decision-Making to Reduce Manufacturing Greenhouse Gas Emissions  

E-Print Network [OSTI]

how to think about green manufacturing and sustainability.for sustainable or green manufacturing is that it is not anthe implementation of green manufacturing, where a wedge

Reich-Weiser, Corinne

2010-01-01T23:59:59.000Z

222

U.S. Advanced Manufacturing and Clean Energy Technology Challenges  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing and Clean Energy Technology Challenges May 6, 2014 AMO Peer Review Mark Johnson Director Advanced Manufacturing Office www.manufacturing.energy.gov This presentation...

223

Additive Manufacturing in China: Aviation and Aerospace Applications (Part 2)  

E-Print Network [OSTI]

Analysis May 2013 Additive Manufacturing in China: Aviationan overview of China’s additive manufacturing industry wasmilitary achievements in additive manufacturing. 2 Initial

ANDERSON, Eric

2013-01-01T23:59:59.000Z

224

A Review of Engineering Research in Sustainable Manufacturing  

E-Print Network [OSTI]

shape part, e.g. , additive manufacturing, Transactions offace operations. Additive manufacturing of metal componentsenvironmen- tal merits of additive manufacturing relative to

2013-01-01T23:59:59.000Z

225

Contact Manufacturing Demonstration Facility Craig Blue, Ph.D...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Demonstration Facility Craig Blue, Ph.D. Director, Manufacturing Demonstration Facility (865) 574-4351 blueca@ornl.gov INNOVATIONS IN MANUFACTURING www.ornl.gov...

226

Low Temperature PEM Fuel Cell Manufacturing Needs  

E-Print Network [OSTI]

Low Temperature PEM Fuel Cell Manufacturing Needs Presented by Duarte Sousa, PE Manufacturing Fuel Cell Manhattan Project #12; Cost drivers were identified for the following: · MEA · Plates · Balance of Plant (BOP) · Fuel Processing Manufacturing Fuel Cell Project ­ Phase 1 Note that this presentation

227

Energy Manufacturing Matthew Realff and Steven Danyluk  

E-Print Network [OSTI]

Energy Manufacturing Matthew Realff and Steven Danyluk Georgia Institute of Technology This white Foundation and held in Arlington VA, on March 24-25, 2009 on Energy Manufacturing. The workshop attendees participated in discussions and presented their views on energy manufacturing and the presentations

Das, Suman

228

8th Global Conference on Sustainable Manufacturing  

E-Print Network [OSTI]

manufacturing in the UAE · Potentials of renewables · Education for sustainability engineering · Green supply8th Global Conference on Sustainable Manufacturing Architecture for Sustainable Engineering for research institutes and industrial partners related to the area of sustainable manufacturing. It enables

Berlin,Technische Universität

229

Additive manufacturing of metallic tracks on  

E-Print Network [OSTI]

Additive manufacturing of metallic tracks on green ceramic/dielectrics Problem this technology microelectronics such as manufacture of LTCC ceramic/ Dielectric antenna and rapid PCB prototyping or repair (note: may require additional tooling/ set up time) · Rapid Prototyping & small scale manufacture

Painter, Kevin

230

e! Science News Semiconductor manufacturing technique holds  

E-Print Network [OSTI]

arsenide chips manufactured in multilayer stacks: light sensors, high-speed transistors and solar cellse! Science News Semiconductor manufacturing technique holds promise for solar energy Published semiconductor manufacturing method pioneered at the University of Illinois, the future of solar energy just got

Rogers, John A.

231

ICME & MGI Big Area Additive Manufacturing  

E-Print Network [OSTI]

ICME & MGI · Big Area Additive Manufacturing · Neutron Characterization for AM · Materials problems in additive manu- facturing (AM). Additive manufacturing, or three-dimensional (3-D) printing of the world's most advanced neu- tron facilities, the HFIR and SNS, to characterize additive manufactured

232

Pseudomonas fluorescens -A robust manufacturing platform  

E-Print Network [OSTI]

Pseudomonas fluorescens -A robust manufacturing platform Reprinted from July/August 2004 Speciality at efficient- ly transporting single chain antibodies and other mammalian-derived proteins. In addition production. Dowpharma, a contract manufacturing services unit of Dow Chemical, has developed a manufacturing

Lebendiker, Mario

233

Manufacturing Research & Development for Systems that will  

E-Print Network [OSTI]

focused on manufacturability issues such as low-cost, high-volume manufacturing systems, advanced to move the United States toward a future hydrogen economy. While many scientific, technical's laboratory-scale fabrication technologies to high-volume commercial manufacturing has been identified as one

234

EFFECTIVE STRUCTURAL HEALTH MONITORING WITH ADDITIVE MANUFACTURING  

E-Print Network [OSTI]

will be presented for components that can be processed by additive manufacturing (AM) or 3D printing. The origin structures. KEYWORDS : structural health monitoring methodology, 3D printing, additive manufacturing, fatigue, intelligent structure INTRODUCTION Additive manufacturing (AM), also known as 3D Printing or Rapid

Boyer, Edmond

235

Manufacturing  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department of Energy Low-TemperatureEnergy Maine09 BalanceStorageReviewFlow of

236

NREL Manufacturing R&D Workshop NREL H2/FC Manufacturing R&D Workshop  

E-Print Network [OSTI]

&D Workshop Fuel Cell Proton Exchange Membrane (PEM) and Solid Oxide Fuel Cell (SOFC) Manufacturing Lines and driving down the cost of fuel cell manufacturing through automation. What are the key technical Membrane Electrode Assembly Manufacturing Hypothetical Fuel Cell Manufacturing Platforms August 11, 2011

237

Research on advanced photovoltaic manufacturing technology  

SciTech Connect (OSTI)

This report outlines opportunities for significantly advancing the scale and economy of high-volume manufacturing of high-efficiency photovoltaic (PV) modules. We propose to pursue a concurrent effort to advance existing crystalline silicon module manufacturing technology and to implement thin film CuInSe{sub 2} (CIS) module manufacturing. This combination of commercial-scale manufacturing of high-efficiency crystalline silicon modules and of pilot-scale manufacturing of low-cost thin film CIS technology will support continued, rapid growth of the US PV industry.

Jester, T.; Eberspacher, C. (Siemens Solar Industries, Camarillo, CA (United States))

1991-11-01T23:59:59.000Z

238

Manufacturing Demonstration Facility Technology Collaborations for US Manufacturers in Advanced  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and InterfacesAdministrationManufacturing - GE Appliances, ORNL Low-Cost

239

THE MASTER OF ENGINEERING IN MANUFACTURING ENGINEERING PROGRAM PLANNING SHEET  

E-Print Network [OSTI]

for Manufacturing ME 526 Simulation of Physical Processes ME 535 Green Manufacturing METHE MASTER OF ENGINEERING IN MANUFACTURING ENGINEERING PROGRAM PLANNING SHEET be at the 500 level or above. 1. Core Manufacturing Requirement ­ 24 credits

240

Ohio Advanced Energy Manufacturing Center  

SciTech Connect (OSTI)

The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote overall industry health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries and high temperature heat exchangers. It also included a novel advanced weld trainer that EWI

Kimberly Gibson; Mark Norfolk

2012-07-30T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Manufacturing method of photonic crystal  

DOE Patents [OSTI]

A manufacturing method of a photonic crystal is provided. In the method, a high-refractive-index material is conformally deposited on an exposed portion of a periodic template composed of a low-refractive-index material by an atomic layer deposition process so that a difference in refractive indices or dielectric constants between the template and adjacent air becomes greater, which makes it possible to form a three-dimensional photonic crystal having a superior photonic bandgap. Herein, the three-dimensional structure may be prepared by a layer-by-layer method.

Park, In Sung; Lee, Tae Ho; Ahn, Jin Ho; Biswas, Rana; Constant, Kristen P.; Ho, Kai-Ming; Lee, Jae-Hwang

2013-01-29T23:59:59.000Z

242

Method for manufacturing magnetohydrodynamic electrodes  

DOE Patents [OSTI]

A method of manufacturing electrodes for use in a magnetohydrodynamic (MHD) generator is described comprising the steps of preparing a billet having a core of a first metal, a tubular sleeve of a second metal, and an outer sheath of an extrusile metal; evacuating the space between the parts of the assembled billet; extruding the billet; and removing the outer jacket. The extruded bar may be made into electrodes by cutting and bending to the shape required for an MHD channel frame. The method forms a bond between the first metal of the core and the second metal of the sleeve strong enough to withstand a hot and corrosive environment.

Killpatrick, D.H.; Thresh, H.R.

1980-06-24T23:59:59.000Z

243

Manufacturing Fuel Cell Manhattan Project  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department of Energy Low-TemperatureEnergyAll ManufacturingFoodOctoberto DOE Fuel

244

Manufacturing Initiative | Clean Energy | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fund Las ConchasTrail5,722,326ManhattanEnergyManufacturing

245

Articulated Mesh Animation from Multi-view Silhouettes Daniel Vlasic Ilya Baran Wojciech Matusik  

E-Print Network [OSTI]

, and deformation model learning. CR Categories: I.3.7 [Computer Graphics]: Three Dimensional Graphics and Realism--AnimationArticulated Mesh Animation from Multi-view Silhouettes Daniel Vlasic Ilya Baran Wojciech Matusik Institute of Technology Abstract Details in mesh animations are difficult to generate but they have great

Popovic, Jovan

246

Inducing Letter-by-letter Dyslexia in Normal Readers Daniel Fiset1  

E-Print Network [OSTI]

Inducing Letter-by-letter Dyslexia in Normal Readers Daniel Fiset1 , Fre´de´ric Gosselin1 , Caroline Blais1 , and Martin Arguin1,2 Abstract & Letter-by-letter (LBL) dyslexia is an acquired reading. Sequential and parallel letter processing in letter-by-letter dyslexia. Cogni- tive Neuropsychology, 19, 535

Gosselin, Frédéric

247

Managing Operational Uncertainty with Real Options Tsoline Mikaelian, Jason Bartolomei, Daniel Hastings  

E-Print Network [OSTI]

, Daniel Hastings Massachusetts Institute of Technology 77 Massachusetts Ave., Cambridge, MA 02139 tsoline for the purpose of coordinated monitoring, surveillance and rapid emergency response. Given the dynamic, fast demands and mission requirements. In general, the design of the MAV must incorporate "enough" flexibility

de Weck, Olivier L.

248

Wind Farm Reactive Support and Voltage Control Daniel F. Opila Abdi M. Zeynu Ian A. Hiskens  

E-Print Network [OSTI]

Wind Farm Reactive Support and Voltage Control Daniel F. Opila Abdi M. Zeynu Ian A. Hiskens Abstract--Wind farms typically contain a variety of voltage control equipment including tap or wind farm; it is desirable to treat all the equipment as an integrated system rather than independent

Hiskens, Ian A.

249

Wilbert Lorne MacDonald Compiled by Sylvia Crooks and Laurenda Daniells (1982)  

E-Print Network [OSTI]

Wilbert Lorne MacDonald fonds Compiled by Sylvia Crooks and Laurenda Daniells (1982) University catalogue) #12;Fonds Description Wilbert MacDonald fonds. ­ 1945-1978. 32.5 cm of textual records. 353 drawings. Biographical Sketch Wilbert MacDonald (1879-1966) obtained his B.A. from the University

Handy, Todd C.

250

The East Greenland Spill Jet* ROBERT S. PICKART, DANIEL J. TORRES, AND PAULA S. FRATANTONI  

E-Print Network [OSTI]

The East Greenland Spill Jet* ROBERT S. PICKART, DANIEL J. TORRES, AND PAULA S. FRATANTONI Woods Greenland shelf break south of Denmark Strait have revealed an intense, narrow current banked against and entraining ambient water. The current has been named the East Greenland Spill Jet. It resides beneath

Pickart, Robert S.

251

Presentation and Structure of Substitutes Meir Bing Daniel Lehmann Paul Milgrom  

E-Print Network [OSTI]

; Abstract We propose two di#11;erent methods for presenting (gross-) substitutes valuations. Each providesPresentation and Structure of Substitutes Valuations Meir Bing Daniel Lehmann Paul Milgrom #3 short descriptions for a family of substitutes valuations. We also show that any substitutes valuation

Lehmann, Daniel

252

Head tilt during driving DANIEL C. ZIKOVITZ and LAURENCE R. HARRIS *  

E-Print Network [OSTI]

Head tilt during driving DANIEL C. ZIKOVITZ ² and LAURENCE R. HARRIS² * Departments of ² Biology and Psychology, York University, Toronto, Ontario M3J 1P3, Canada Keywords: Driving behaviour; Head tilt; Vision with the visually-available estimate of the curvature of the road (r 2 = 0.86) but not with the centripetal force (r

Harris, Laurence R.

253

A Tool for Checking ANSI-C Programs Edmund Clarke, Daniel Kroening, and Flavio Lerda  

E-Print Network [OSTI]

A Tool for Checking ANSI-C Programs Edmund Clarke, Daniel Kroening, and Flavio Lerda Carnegie Mellon University Abstract. We present a tool for the formal verification of ANSI-C pro- grams using Bounded Model Checking (BMC). The emphasis is on us- ability: the tool supports almost all ANSI-C language

Clarke, Edmund M.

254

Hardware Verification using ANSI-C Programs as a Reference Edmund Clarke Daniel Kroening  

E-Print Network [OSTI]

Hardware Verification using ANSI-C Programs as a ReferenceÂŁ Edmund Clarke Daniel Kroening Computer an algorithm to verify a hardware design given in Verilog using an ANSI-C program as a specification. We use in a language like ANSI-C. This program is then used for extensive testing and debugging, in particular of any

Clarke, Edmund M.

255

Predicate Abstraction of ANSI--C Programs using SAT Edmund Clarke Daniel Kroening Natasha Sharygina  

E-Print Network [OSTI]

Predicate Abstraction of ANSI--C Programs using SAT Edmund Clarke Daniel Kroening Natasha Sharygina technique that uses an efficient SAT solver for generating the abstract transition relation of ANSI Abstraction, ANSI­C, SAT #12; 1 Introduction It is widely believed that effective model checking [10

256

THE MILLION SONG DATASET Thierry Bertin-Mahieux, Daniel P.W. Ellis  

E-Print Network [OSTI]

THE MILLION SONG DATASET Thierry Bertin-Mahieux, Daniel P.W. Ellis Columbia University LabROSA, EE {brian, paul}@echonest.com ABSTRACT We introduce the Million Song Dataset, a freely-available collection research dataset in our field. As an illustra- tion, we present year prediction as an example application

Ellis, Dan

257

The nature of the Chinese IPR administrative enforcement system Salom Lachat*, Daniel Lachat**  

E-Print Network [OSTI]

The nature of the Chinese IPR administrative enforcement system Salomé Lachat*, Daniel Lachat** Abstract. Assessing IPR enforcement sys- tems is usually performed by comparison of the results achieved the Chinese IPR enforcement system. It suggests switching slowly to court enforce- ment with the aim

Paris-Sud XI, Université de

258

USING VIDEO FOR ANALYZING DAYLIGHT SIMULATION TOOLS Daniel C. Glaser1  

E-Print Network [OSTI]

USING VIDEO FOR ANALYZING DAYLIGHT SIMULATION TOOLS Daniel C. Glaser1 , F. Whitney Smith2 , Barb socio-technical techniques can be employed to analyze video data of people using daylight simulation, a classic daylighting analysis tool; and in the second a lighting professional is asked to use a new data

Varela, Carlos

259

c Copyright by Daniel Duane Deavours, 2001 FORMAL SPECIFICATION OF THE MOBIUS MODELING FRAMEWORK  

E-Print Network [OSTI]

c Copyright by Daniel Duane Deavours, 2001 #12;FORMAL SPECIFICATION OF THE M¨OBIUS MODELING of Electrical and Computer Engineering University of Illinois at Urbana-Champaign, 2001 William H. Sanders to create a general framework that supports a large variety of modeling formalisms. iii #12;In this thesis

Illinois at Urbana-Champaign, University of

260

A Novel Pump for MEMS Applications Mihir Sen, Daniel Wajerski, and Mohamed Gad-el-Hak  

E-Print Network [OSTI]

1 A Novel Pump for MEMS Applications Mihir Sen, Daniel Wajerski, and Mohamed Gad-el-Hak Department of Fluids Engineering, vol. 118, pp. 624-627, 1996. #12;2 A Novel Pump for MEMS Applications Mihir Sen1 of Notre Dame Notre Dame, IN 46556 We present a novel approach for pumping fluids in micromechanical

Gad-el-Hak, Mohamed

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Combining Density Functional Theory and Density Matrix Functional Theory Daniel R. Rohr1  

E-Print Network [OSTI]

Combining Density Functional Theory and Density Matrix Functional Theory Daniel R. Rohr1 , Julien and CNRS, 4 place Jussieu, 75252 Paris, France We combine density-functional theory with density cleavage is an ubiquitous process for chemistry. Density-matrix functional theory (DMFT) (see, e.g., Refs

Paris-Sud XI, Université de

262

DYNAMIC SIMULATION OF INEXTENSIBLE CLOTH Jan Bender, Daniel Bayer and Raphael Diziol  

E-Print Network [OSTI]

DYNAMIC SIMULATION OF INEXTENSIBLE CLOTH Jan Bender, Daniel Bayer and Raphael Diziol Institut fĂĽr-based modelling, impulse-based simulation, inelastic textiles 1. INTRODUCTION The dynamic simulation of cloth an efficient simulation. For example, Georgii and Westermann (2005) describe a method for a fast dynamic

Prautzsch, Hartmut

263

Glaciohydraulic supercooling in former ice sheets? Grahame J. Larson a,*, Daniel E. Lawson b  

E-Print Network [OSTI]

a Department of Geological Sciences, Michigan State University, East Lansing MI 48824, USA b Geophysical Vegas, NV 89154-4010, USA g Department of Geology, Central Michigan University, Mount Pleasant, MI 48859Glaciohydraulic supercooling in former ice sheets? Grahame J. Larson a,*, Daniel E. Lawson b

Lachniet, Matthew S.

264

Product action Peter J. Cameron, Daniele A. Gewurz, Francesca Merola2  

E-Print Network [OSTI]

Product action Peter J. Cameron, Daniele A. Gewurz, Francesca Merola2 January 30, 2004 Abstract This paper studies the cycle indices of products of permutation groups. The main focus is on the product action of the direct product of permuta- tion groups. The number of orbits of the product on n

Cameron, Peter

265

Estimating Self-Sustainability in Peer-to-Peer Swarming Systems Daniel S. Menasche  

E-Print Network [OSTI]

Estimating Self-Sustainability in Peer-to-Peer Swarming Systems Daniel S. Menasch´e· , Antonio A. A this dependence. For this purpose, we propose a new metric, namely swarm self-sustainability. A swarm is referred to as self-sustaining if all its blocks are collectively held by peers; the self-sustainability of a swarm

Massachusetts at Amherst, University of

266

Economic Value of Outdoor Recreation Activities in Iowa Daniel Otto, KristinTylka, and  

E-Print Network [OSTI]

Economic Value of Outdoor Recreation Activities in Iowa Daniel Otto, KristinTylka, and Susan Erickson Department of Economics Iowa State University Extension and Outreach Center for Agricultural Otto is a professor in the Department of Economics at Iowa State University, Kristin Tylka

Chen, Tsing-Chang "Mike"

267

DYNAMICS OF FREE SURFACES IN RANDOM POROUS MEDIA DANIEL M. TARTAKOVSKY AND C. L. WINTER  

E-Print Network [OSTI]

media to be concrete. Predicting flow through natural porous media is complicated by their high degreeDYNAMICS OF FREE SURFACES IN RANDOM POROUS MEDIA DANIEL M. TARTAKOVSKY AND C. L. WINTER SIAM J­1876 Abstract. We consider free surface flow in random porous media by treating hydraulic conduc- tivity

Tartakovsky, Daniel M.

268

Temperature response to future urbanization and climate change Daniel Argueso Jason P. Evans Lluis Fita  

E-Print Network [OSTI]

that covers the Sydney area. The future simulation incorporates the projected changes in the urban area in regions of intense energy consumption and low net radiation. The imperviousness of urban surfaces was alsoTemperature response to future urbanization and climate change Daniel Argu¨eso · Jason P. Evans

Evans, Jason

269

Active Self-Assembly Daniel Arbuckle and Aristides A. G. Requicha  

E-Print Network [OSTI]

Active Self-Assembly Daniel Arbuckle and Aristides A. G. Requicha Laboratory for Molecular Robotics University of Southern California Los Angeles, USA darbuckl@usc.edu requicha@usc.edu Abstract--Self-assembly. Traditional, or passive, self-assembly techniques have great difficulty in producing the asymmetric structures

Southern California, University of

270

Self-repairing Self-assembled Structures Daniel Arbuckle and Aristides A. G. Requicha  

E-Print Network [OSTI]

1 Self-repairing Self-assembled Structures Daniel Arbuckle and Aristides A. G. Requicha Department.arbuckle@usc.edu, requicha@usc.edu Abstract-- This paper introduces a method by which structures can be self-assembled from by a process analogous to mitosis. I. INTRODUCTION Self-assembly agents have the potential to become an im

Southern California, University of

271

Randomized Model Predictive Control for HVAC Systems Alessandra Parisio, Damiano Varagnolo, Daniel Risberg,  

E-Print Network [OSTI]

Randomized Model Predictive Control for HVAC Systems Alessandra Parisio, Damiano Varagnolo, Daniel Conditioning (HVAC) sys- tems play a fundamental role in maintaining acceptable ther- mal comfort and Indoor. A possible solu- tion is to develop effective control strategies for HVAC sys- tems, but this is complicated

Johansson, Karl Henrik

272

The Minimum Distance of Turbo-Like Codes Louay Bazzi, Mohammad Mahdian, Daniel A. Spielman  

E-Print Network [OSTI]

1 The Minimum Distance of Turbo-Like Codes Louay Bazzi, Mohammad Mahdian, Daniel A. Spielman Abstract--Worst-case upper bounds are derived on the minimum distance of parallel concatenated Turbo codes that parallel-concatenated Turbo codes and repeat-convolute codes with sub-linear memory are asymptotically bad

Spielman, Daniel A.

273

Orbital and CO2 forcing of late Paleozoic continental ice sheets Daniel E. Horton,1  

E-Print Network [OSTI]

) produce large changes in late Paleozoic ice volume ($1.3 � 108 km3 ) and sea level ($20 to 245 m). Between cold summer orbit, but still produces significant ice volumes ($8­12 � 107 km3 ). Our results highlightOrbital and CO2 forcing of late Paleozoic continental ice sheets Daniel E. Horton,1 Christopher J

Poulsen, Chris J.

274

A STRUCTURAL MODEL FOR ELECTRICITY PRICES RENE CARMONA, MICHAEL COULON, AND DANIEL SCHWARZ  

E-Print Network [OSTI]

A STRUCTURAL MODEL FOR ELECTRICITY PRICES RENE CARMONA, MICHAEL COULON, AND DANIEL SCHWARZ Abstract pricing in electricity markets, thus extending the growing branch of liter- ature which describes power prices for electricity. We capture both the heavy-tailed nature of spot prices and the complex dependence

Carmona, Rene

275

Secure Multiparty Computations on Bitcoin Marcin Andrychowicz, Stefan Dziembowski, Daniel Malinowski, Lukasz Mazurek  

E-Print Network [OSTI]

Secure Multiparty Computations on Bitcoin Marcin Andrychowicz, Stefan Dziembowski, Daniel.malinowski, lukasz.mazurek}@crypto.edu.pl on leave from Sapienza University of Rome Abstract Bitcoin. The goal of this paper is to show how these properties of Bitcoin can be used in the area of secure

276

Fair Two-Party Computations via Bitcoin Deposits Marcin Andrychowicz , Stefan Dziembowski , Daniel Malinowski  

E-Print Network [OSTI]

Fair Two-Party Computations via Bitcoin Deposits Marcin Andrychowicz , Stefan Dziembowski , Daniel Malinowski and Lukasz Mazurek University of Warsaw Abstract. We show how the Bitcoin currency system (with a financial compensation (in bitcoins). One possible application of such protocols is the fair contract

277

Cyclotron waves in a non-neutral plasma column Daniel H. E. Dubin  

E-Print Network [OSTI]

plasma column with near-Maxwellian velocity distributions. We focus on the z-independent componentCyclotron waves in a non-neutral plasma column Daniel H. E. Dubin Citation: Phys. Plasmas 20. Additional information on Phys. Plasmas Journal Homepage: http://pop.aip.org/ Journal Information: http

California at San Diego, University of

278

Cyclotron Waves in a Nonneutral Plasma Column Daniel H.E. Dubin  

E-Print Network [OSTI]

plasma column with near-Maxwellian velocity distributions. We focus on the z-independent componentCyclotron Waves in a Nonneutral Plasma Column Daniel H.E. Dubin Department of Physics, University of California at San Diego, La Jolla, California 92093 (Dated: February 22, 2013 [submitted to Phys. Plasmas

California at San Diego, University of

279

Cyclotron waves in a non-neutral plasma column Daniel H. E. Dubin  

E-Print Network [OSTI]

plasma column with near-Maxwellian velocity distributions. We focus on the z-independent component#12;Cyclotron waves in a non-neutral plasma column Daniel H. E. Dubin Department of Physics April 2013; published online 25 April 2013) A kinetic theory of linear electrostatic plasma waves

California at San Diego, University of

280

Infrared Spectroscopy of the Microhydrated Nitrate Ions NO3 Daniel J. Goebbert,,  

E-Print Network [OSTI]

Infrared Spectroscopy of the Microhydrated Nitrate Ions NO3 - (H2O)1-6 Daniel J. Goebbert ReceiVed: April 15, 2009 We present infrared photodissociation spectra of the microhydrated nitrate ions the infrared spectroscopy of NO3 - (H2O)n clusters, n ) 1-6. The gas-phase vibrational spectroscopy of NO3

Neumark, Daniel M.

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Type-Preserving Garbage Collectors Daniel C. Wang Andrew W. Appel  

E-Print Network [OSTI]

Type-Preserving Garbage Collectors Daniel C. Wang Andrew W. Appel Department of Computer Science that acts as a tracing garbage collector for the program. Since the garbage collector is an explicit function, we do not need to provide a trusted garbage collector as a runtime service to manage memory

Appel, Andrew W.

282

THE WEIGHTED WORDS COLLECTOR JEREMIE DU BOISBERRANGER, DANI`ELE GARDY, AND YANN PONTY  

E-Print Network [OSTI]

THE WEIGHTED WORDS COLLECTOR J´ER´EMIE DU BOISBERRANGER, DANI`ELE GARDY, AND YANN PONTY Abstract. Motivated by applications in bioinformatics, we consider the word collector problem, i.e. the expected is obtained. The originality of this instance of the non-uniform coupon collector lies in the, potentially

Paris-Sud XI, Université de

283

INDUCTION TIME EFFECTS IN PULSE COMBUSTORS \\Lambda Daniel L. Marcus y  

E-Print Network [OSTI]

INDUCTION TIME EFFECTS IN PULSE COMBUSTORS \\Lambda Daniel L. Marcus y Richard B. Pember John B of pulse combustor is based on a Helmholtz resonator -- a burn­ ing cycle drives a resonant pressure wave a century ago, a full understanding of the operation of a pulse combustor still does not exist. The dominant

284

Technology Management Routines That Matter to Technology Managers Daniel Z. Levin  

E-Print Network [OSTI]

Technology Management Routines That Matter to Technology Managers Daniel Z. Levin Management South Africa barnardh@gibs.co.za International Journal of Technology Management, Vol. 41, Nos. 1/2, 2008, pp. 22-37 ABSTRACT This study addresses the fragmentation in the technology management field

Lin, Xiaodong

285

Cavitation and the state of stress in a flowing liquid Daniel D. Joseph  

E-Print Network [OSTI]

Cavitation and the state of stress in a flowing liquid Daniel D. Joseph University of Minnesota The problem of the inception of cavitation is formulated in terms of a compar- ison of the breaking strength or cavitation threshold at each point of a liquid sam- ple with the principal stresses there. A criterion

Joseph, Daniel D.

286

Prevention of tissue damage by water jet during cavitation Daniel Palanker,a)  

E-Print Network [OSTI]

Prevention of tissue damage by water jet during cavitation Daniel Palanker,a) Alexander Vankov Cavitation bubbles accompany explosive vaporization of water following pulsed energy deposition in liquid can produce tissue damage at a distance exceeding the radius of the cavitation bubble by a factor of 4

Palanker, Daniel

287

Cavitation and the state of stress in a flowing liquid Daniel D. Joseph  

E-Print Network [OSTI]

Cavitation and the state of stress in a flowing liquid Daniel D. Joseph University of Minnesota The problem of the inception of cavitation is formulated in terms of a compar­ ison of the breaking strength or cavitation threshold at each point of a liquid sam­ ple with the principal stresses there. A criterion

Joseph, Daniel D.

288

Blue Noise Sampling with Controlled Aliasing DANIEL HECK and THOMAS SCHL OMER and OLIVER DEUSSEN  

E-Print Network [OSTI]

Blue Noise Sampling with Controlled Aliasing DANIEL HECK and THOMAS SCHL ¨OMER and OLIVER DEUSSEN University of Konstanz In this paper we revisit the problem of blue noise sampling with a strong focus types of blue noise patterns: step blue noise with a power spectrum in the form of a step function

Deussen, Oliver

289

Robust control/scheduling co-design: application to robot control Daniel Simon  

E-Print Network [OSTI]

Robust control/scheduling co-design: application to robot control Daniel Simon INRIA Rh of robust closed-loop control can also be ap- plied to the real-time scheduler to provide on-line adap- tion of some scheduling parameters, with the objective of controlling the computing resource allocation

Paris-Sud XI, Université de

290

Page Digest for Large-Scale Web Services Daniel Rocco, David Buttler, Ling Liu  

E-Print Network [OSTI]

Page Digest for Large-Scale Web Services Daniel Rocco, David Buttler, Ling Liu Georgia Institute this storage and processing efficiently. In this paper, we introduce Page Digest, a mechanism for efficient storage and processing of Web documents. The Page Digest design encourages a clean separation

Rocco, Daniel

291

PHANTOM MAPS AND CHROMATIC PHANTOM MAPS J. DANIEL CHRISTENSEN AND MARK HOVEY  

E-Print Network [OSTI]

PHANTOM MAPS AND CHROMATIC PHANTOM MAPS J. DANIEL CHRISTENSEN AND MARK HOVEY Abstract. In the first part, we determine conditions on spectra X and Y under which either every map from X to Y is phantom, or no nonzero maps are. We also address the question of whether such all or nothing behaviour is preserved when

Christensen, Dan

292

PHANTOM MAPS AND CHROMATIC PHANTOM MAPS J. DANIEL CHRISTENSEN AND MARK HOVEY  

E-Print Network [OSTI]

PHANTOM MAPS AND CHROMATIC PHANTOM MAPS J. DANIEL CHRISTENSEN AND MARK HOVEY Abstract. In the #12;rst part, we determine conditions on spectra X and Y under which either every map from X to Y is phantom, or no nonzero maps are. We also address the question of whether such all or nothing behaviour

Christensen, Dan

293

It is ten years since... Daniel Bond and Derek R. Lovley's AEM paper `Electricity Production by  

E-Print Network [OSTI]

2 It is ten years since... Daniel Bond and Derek R. Lovley's AEM paper `Electricity Production by Geobacter sulfurreducens Attached To Electrodes' was published in 2003. "Science is as much luck as anything to electricity at high columbic efficiencies and that this could be a sustainable process because

Lovley, Derek

294

Context-Aware Interaction Models in Cross-Organizational Processes Florian Skopik, Daniel Schall, Schahram Dustdar  

E-Print Network [OSTI]

Context-Aware Interaction Models in Cross-Organizational Processes Florian Skopik, Daniel Schall for external constraints such as availability of material, delivery dates, and efficiency of humans- volvement, cross-organizational process models, trust I. INTRODUCTION Small and medium-sized companies

Dustdar, Schahram

295

A SIMULATION-BASED MODEL OF ABDUCTION Gildas Morvan Daniel Dupont Philippe Kubiak  

E-Print Network [OSTI]

A SIMULATION-BASED MODEL OF ABDUCTION Gildas Morvan Daniel Dupont Philippe Kubiak LGI2A - EA 3926 D.univ-artois.fr KEYWORDS simulation-based reasoning, abduction, forensic ento- mology ABSTRACT Abduction, or Inference of "surprising" observations. In this paper, a simulation-based model of abduction is intro- duced. This model

Paris-Sud XI, Université de

296

Dead Block Replacement and Bypass with a Sampling Predictor Daniel A. Jimenez  

E-Print Network [OSTI]

Dead Block Replacement and Bypass with a Sampling Predictor Daniel A. Jim´enez Department of Computer Science The University of Texas at San Antonio Abstract We present a cache replacement and bypass policy driven by dead block prediction. A block is considered dead is it will be replaced before

Paris-Sud XI, Université de

297

Real-time Bus Information on Mobile Devices Stuart D. Maclean, Daniel J. Dailey  

E-Print Network [OSTI]

on a variety of personal electronic devices. Within the wireless communications industry, the WAP Forum[2] has1 Real-time Bus Information on Mobile Devices Stuart D. Maclean, Daniel J. Dailey Abstract-- We restrictions of such devices, e.g., screen size and paucity of keyboard options, influences the user in

298

On the causes of mid-Pliocene warmth and polar amplification Daniel J. Lunt a,  

E-Print Network [OSTI]

On the causes of mid-Pliocene warmth and polar amplification Daniel J. Lunt a, , Alan M. Haywood b , Gavin A. Schmidt c , Ulrich Salzmann d , Paul J. Valdes a , Harry J. Dowsett e , Claire A. Loptson interglacials sea levels were higher than today (estimated to be 10 to 30+m) meaning that global ice volume

299

9. Biomedical Imaging Informatics Daniel L. Rubin, Hayit Greenspan, and James F. Brinkley  

E-Print Network [OSTI]

1 9. Biomedical Imaging Informatics Daniel L. Rubin, Hayit Greenspan, and James F. Brinkley After of non-image biomedical data? 4. What sort of applications can be developed to make use of the semantic that must be considered in many biomedical informatics applications. Therefore, this chapter is devoted

Rubin, Daniel L.

300

Manufacturability Study and Scale-Up for Large Format Lithium...  

Broader source: Energy.gov (indexed) [DOE]

contributions out of over 40 in FY1314 * Selected publications 1. J. Li, B.L. Armstrong, J. Kiggans, C. Daniel, and D.L. Wood, "Lithium Ion Cell Performance Enhancement...

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Industrial Scale Demonstration of Smart Manufacturing Achieving...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

TX National Center for Manufacturing Sciences Ann Arbor, MI Nimbis Services McLean, VA Praxair Tonawanda, NY Rockwell Automation Milwaukee, WI For additional information, please...

302

Manufacturing Ecosystems and Keystone Technologies (Text Version...  

Broader source: Energy.gov (indexed) [DOE]

Culver, Special Assistant to Program Manager, Advanced Manufacturing Office (AMO) Kelly Visconti, AAAS Science & Technology Policy Fellow, AMO DR. LEO CHRISTODOULOU: I would...

303

Agenda: Fiber Reinforced Polymer Composite Manufacturing Workshop  

Broader source: Energy.gov (indexed) [DOE]

Blue Team B (Washington II & III) - Manufacturing Process Technology Facilitators - Kelly Visconti and Steve Sikirica; Note taker - Theresa Miller Red Team (Madison Room) -...

304

Manufacturing Demonstration Facility Workshop Videos | Department...  

Broader source: Energy.gov (indexed) [DOE]

on March 12, 2012. Lauren Culver, Special Assistant to Program Manager, AMO, and Kelly Visconti, AAAS Science & Technology Policy Fellow, AMO, speaking at the Manufacturing...

305

Performance, Market and Manufacturing Constraints relevant to...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Constraints relevant to the Industrialization of Thermoelectric Devices Market pricing of thermoelectric raw materials and processing, cost of manufacture of devices and...

306

Energy & Manufacturing Workforce Training Topics List - Version...  

Broader source: Energy.gov (indexed) [DOE]

View this searchable list of the training programs in the areas of energy andor manufacturing. Information provided in this list includes: the subjects being taught, grantee,...

307

2010 Manufacturing Energy and Carbon Footprints: Definitions...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Definitions and Assumptions 2010 Manufacturing Energy and Carbon Footprints: Definitions and Assumptions This 13-page document defines key terms and details assumptions and...

308

Oak Ridge National Laboratory Manufacturing Demonstration Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Oak Ridge National Laboratory Manufacturing Demonstration Facility Technology Collaborations | Proposal Guidelines Proposal Guidelines Proposals should be no more than 5 single...

309

Energy-Related Carbon Emissions in Manufacturing  

Reports and Publications (EIA)

Energy-related carbon emissions in manufacturing analysis and issues related to the energy use, energy efficiency, and carbon emission indicators.

2000-01-01T23:59:59.000Z

310

Supplemental Comments of the Plumbing Manufacturers Instititute...  

Broader source: Energy.gov (indexed) [DOE]

Supplemental Comments of the Plumbing Manufacturers Instititute Regarding the Economic Impacts of the Proposed Definition of "Showerhead," Docket No. EERE-2010-BT-NOA-0016...

311

Renewable Energy Manufacturing Tax Credit (South Carolina)  

Broader source: Energy.gov [DOE]

South Carolina offers a ten percent income tax credit to the manufacturers of renewable energy operations* for tax years 2010 through 2015.

312

Establishing Greener Products and Manufacturing Processes  

E-Print Network [OSTI]

KEYWORDS: Life Cycle Assessment, LCA, Green manufacturing,cycle phases, Life Cycle Assessment (LCA). The followingimpact. 2.2 Life Cycle Assessment (LCA) and Related Metrics

Linke, Barbara; Huang, Yu-Chu; Dornfeld, David

2012-01-01T23:59:59.000Z

313

Welcome and Advanced Manufacturing Partnership (Text Version)  

Broader source: Energy.gov [DOE]

This is a text version of the Welcome and Advanced Manufacturing Partnership video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

314

American Energy and Manufacturing Competitiveness Summit  

Broader source: Energy.gov [DOE]

The American Energy and Manufacturing Competitiveness Summit will bring together leaders and perspectives from industry, government, academia, national laboratories, labor, and policy organizations...

315

Clean Energy Manufacturing Initiative Midwest Regional Summit...  

Office of Environmental Management (EM)

Fiber Reinforced Polymer Composite Manufacturing Workshop Multimaterial Joining Workshop Characterization of Thermo-Mechanical Behaviors of Advanced High Strength Steels (AHSS)...

316

Innovative Manufacturing Initiative Recognition Day, Advanced...  

Broader source: Energy.gov (indexed) [DOE]

infrastructure Education and training Policy EEREAMO Focus * Manufacturing in the US * GDP and employment enhancement * Energy efficiency and clean energy industry * Energy...

317

Manufacturing Barriers to High Temperature PEM Commercialization...  

Broader source: Energy.gov (indexed) [DOE]

Barriers to High Temperature PEM Commercialization Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011....

318

Manufacturing Ecosystems and Keystone Technologies (Text Version)  

Broader source: Energy.gov [DOE]

This is a text version of the Manufacturing Ecosystems and Keystone Technologies video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

319

Solar Manufacturing Incentive Grant (SMIG) Program  

Broader source: Energy.gov [DOE]

Created in 1995 and administered jointly by the Virginia Department of Mines, Minerals and Energy, and the Virginia Economic Development Partnership, the Solar Manufacturing Incentive Grant (SMIG)...

320

Green Manufacturing Initiative Annual Report 2010  

E-Print Network [OSTI]

Green Manufacturing Initiative Annual Report 2010 Dr. John Patten Dr. David Meade May 3, 2011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Herman Miller Energy Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

de Doncker, Elise

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Low Energy Ion Implantationin Semiconductor Manufacturing | U...  

Office of Science (SC) Website

Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science...

322

2014 Manufacturing Energy and Carbon Footprints: Definitions...  

Broader source: Energy.gov (indexed) [DOE]

and Assumptions A number of key terms are used to interpret the manufacturing energy and carbon footprints. The terms associated with the energy footprint analysis are...

323

Project Profile: Improved Large Aperture Collector Manufacturing...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

feasibility demonstrations focused in three main areas: an aggressive manufacturing optimization of the collector sub-structures for lower input material costs & mechanized...

324

clean energy manufacturing | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

efforts across the DOE Office of Energy Efficiency & Renewable Energy's (EERE's) clean energy technology offices and Advanced Manufacturing Office, focusing on American...

325

Manufactured caverns in carbonate rock  

DOE Patents [OSTI]

Disclosed is a process for manufacturing underground caverns suitable in one embodiment for storage of large volumes of gaseous or liquid materials. The method is an acid dissolution process that can be utilized to form caverns in carbonate rock formations. The caverns can be used to store large quantities of materials near transportation facilities or destination markets. The caverns can be used for storage of materials including fossil fuels, such as natural gas, refined products formed from fossil fuels, or waste materials, such as hazardous waste materials. The caverns can also be utilized for applications involving human access such as recreation or research. The method can also be utilized to form calcium chloride as a by-product of the cavern formation process.

Bruce, David A.; Falta, Ronald W.; Castle, James W.; Murdoch, Lawrence C.

2007-01-02T23:59:59.000Z

326

Wind Turbine Manufacturing Process Monitoring  

SciTech Connect (OSTI)

To develop a practical inline inspection that could be used in combination with automated composite material placement equipment to economically manufacture high performance and reliable carbon composite wind turbine blade spar caps. The approach technical feasibility and cost benefit will be assessed to provide a solid basis for further development and implementation in the wind turbine industry. The program is focused on the following technology development: (1) Develop in-line monitoring methods, using optical metrology and ultrasound inspection, and perform a demonstration in the lab. This includes development of the approach and performing appropriate demonstration in the lab; (2) Develop methods to predict composite strength reduction due to defects; and (3) Develop process models to predict defects from leading indicators found in the uncured composites.

Waseem Faidi; Chris Nafis; Shatil Sinha; Chandra Yerramalli; Anthony Waas; Suresh Advani; John Gangloff; Pavel Simacek

2012-04-26T23:59:59.000Z

327

A Vehicle Manufacturer’s Perspective on Higher-Octane Fuels  

Broader source: Energy.gov [DOE]

Breakout Session 1C—Fostering Technology Adoption I: Building the Market for Renewables with High Octane Fuels A Vehicle Manufacturer’s Perspective on Higher-Octane Fuels Tom Leone, Technical Expert, Powertrain Evaluation and Analysis, Ford Motor Company

328

, 20122893, published online 30 January 20132802013Proc. R. Soc. B Oriol Lapiedra, Daniel Sol, Salvador Carranza and Jeremy M. Beaulieu  

E-Print Network [OSTI]

, Salvador Carranza and Jeremy M. Beaulieu pigeons and doves Behavioural changes and the adaptive and the adaptive diversification of pigeons and doves Oriol Lapiedra1, Daniel Sol1,2, Salvador Carranza3 and Jeremy

Carranza, Salvador

329

Wave-formed sand ripples at Duck, North Carolina Daniel M. Hanes, Vadim Alymov, and Yeon S. Chang  

E-Print Network [OSTI]

Wave-formed sand ripples at Duck, North Carolina Daniel M. Hanes, Vadim Alymov, and Yeon S. Chang], Osborne and Vincent [1993], Vincent and Osborne [1993], Hay and Wilson [1994], Wheatcroft [1994], Thornton

Kirby, James T.

330

Multidimensional Numerical Simulation of a Pulse Combustor \\Lambda Daniel L. Marcus, Richard B. Pember, John B. Bell, Vincent E. Beckner,  

E-Print Network [OSTI]

Multidimensional Numerical Simulation of a Pulse Combustor \\Lambda Daniel L. Marcus, Richard B combustors. Our approach is based on the use of higher­order Godunov methods combined with adaptive

Bell, John B.

331

Daniel B. Warnell School of Forestry and Natural Resources Forestry, Wildlife, Water and Soil Resources, Fisheries and Aquaculture,  

E-Print Network [OSTI]

Daniel B. Warnell School of Forestry and Natural Resources Forestry, Wildlife, Water and Soil to receive academic credit for FANR 3910, Forestry and Natural Resources Practicum, the intern must complete

Hall, Daniel

332

Daniel B. Warnell School of Forestry and Natural Resources Forestry, Wildlife, Water and Soil Resources, Fisheries and Aquaculture,  

E-Print Network [OSTI]

Daniel B. Warnell School of Forestry and Natural Resources Forestry, Wildlife, Water and Soil to receive academic credit for FANR 3900, Forestry and Natural Resources Internship, the intern must work

Hall, Daniel

333

Footedness in world soccer: an analysis of France '98 DAVID P. CAREY,* GEOFF SMITH, DANIEL T. SMITH, JOHN W. SHEPHERD,  

E-Print Network [OSTI]

Footedness in world soccer: an analysis of France '98 DAVID P. CAREY,* GEOFF SMITH, DANIEL T. SMITH.carey@abdn.ac.uk 1994) or are embedded within media commentary on the skill of a particular player. Remarkably

Aberdeen, University of

334

Stratification of anisotropy in the Pacific upper mantle Daniel B. Smith, Michael H. Ritzwoller, and Nikolai M. Shapiro  

E-Print Network [OSTI]

Stratification of anisotropy in the Pacific upper mantle Daniel B. Smith, Michael H. Ritzwoller: surface waves, azimuthal anisotropy, Pacific Citation: Smith, D. B., M. H. Ritzwoller, and N. M. Shapiro

Shapiro, Nikolai

335

MANUFACTURING COMPLEXITY EVALUATION AT THE DESIGN STAGE FOR BOTH MACHINING AND LAYERED MANUFACTURING  

E-Print Network [OSTI]

and an additive process. Manufacturability indexes are calculated at the tool design stage, these indexes provide an accurate view of which areas of the tool will advantageously be machined or manufactured by an additiveMANUFACTURING COMPLEXITY EVALUATION AT THE DESIGN STAGE FOR BOTH MACHINING AND LAYERED

Paris-Sud XI, Université de

336

Composite Tube Trailer Design/Manufacturing Needs  

E-Print Network [OSTI]

composite tube trailers and can, therefore, address issues with: ­ Design ­ Materials ­ Manufacturing in the system ­ Lower cost of carbon fiber ($/strength) ­ Identify material with lower net cost ($/strength) ­ Identify lower cost resin system (raw material & manufacture) ­ Reduce carbon fiber safety factor

337

Biologically inspired mutual synchronization of manufacturing machines  

E-Print Network [OSTI]

Biologically inspired mutual synchronization of manufacturing machines Erjen Lefeber,a,1 , Herman machine is developed. This control system is based on a synchronization mechanism of enzymes replacing of a single turnover cycle. In manufacturing, batch machines serve several jobs simultaneously, e.g., heat

Armbruster, Dieter

338

A Global Assessment of Manufacturing: Economic  

E-Print Network [OSTI]

A Global Assessment of Manufacturing: Economic Development, Energy Use, Carbon Emissions Keywords production, materials, closed loop, China, emerging economies Abstract We present in two parts an assessment of global manufacturing. In the first part, we review economic development, pollution, and carbon

Gutowski, Timothy

339

CHEMICAL ENGINEERING AND MANUFACTURING CHEMICAL ENGINEERING  

E-Print Network [OSTI]

CHEMICAL ENGINEERING AND MANUFACTURING CHEMICAL ENGINEERING Objective Chemical Engineers manufacturing, etc. Now that students have a background on Chemical Engineers, it is time for the activity. Blue frosting e. Green frosting f. Pink frosting g. Purple frosting h. Sprinkle sorting i. Sprinkle

Provancher, William

340

Manufacturing Thomas W. Eagar, Guest Editor  

E-Print Network [OSTI]

Materials Manufacturing Thomas W. Eagar, Guest Editor The bt·h.n-ior of succl'ssful manufac- tunn;imos., t·m·ironment for mate- nab manufacturing changes, so too does our ml·a~un· ol matt·rials performance~·(·vt·r. as shown by Figure 1, there are sen·ral additional dimensions to perfor- mann·. In particular, successful

Eagar, Thomas W.

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Proceedings: EPRI Manufactured Gas Plants 2003 Forum  

SciTech Connect (OSTI)

The EPRI Manufactured Gas Plants 2003 Forum covered a range of topics related to remediation and management of former manufactured gas plant (MGP) sites, with emphasis on technological advances and current issues associated with site cleanup. In specific, the forum covered MGP coal-tar delineation, soil and groundwater remediation technologies, improvements in air monitoring, and ecological risk characterization/risk management tools.

None

2004-02-01T23:59:59.000Z

342

Evaluating Energy Efficiency Improvements in Manufacturing Processes  

E-Print Network [OSTI]

and increasing awareness of "green" customers have brought energy efficient manufacturing on top of the agendaEvaluating Energy Efficiency Improvements in Manufacturing Processes Katharina Bunse1 , Julia Sachs kbunse@ethz.ch, sachsj@student.ethz.ch, mvodicka@ethz.ch Abstract. Global warming, rising energy prices

Boyer, Edmond

343

Watfactory Virtual Manufacturing Process Varying Inputs  

E-Print Network [OSTI]

with the virtual process: · Allows quick exploration (i.e. during a short course) of process improvement ideasWatfactory Virtual Manufacturing Process Machine 1 Machine 2 Machine 3 Stream 1 Machine B Stream 2 Inputs Can be Set by Stream z19, ..., z24 The Watfactory virtual process simulates a manufacturing

Zhu, Mu

344

Advanced Manufacturing Office (Formerly Industrial Technologies Program)  

E-Print Network [OSTI]

: Manufacturing Energy and Carbon Footprint, derived from 2006 MECS #12;Management Structure and Project Execution, aqueous-based processes). Develop broadly applicable, manufacturing processes that reduce energy intensity-value industries such as the renewable energy industry. Example materials include low-cost carbon fiber, low

345

Duracold Refrigeration Manufacturing: Order (2013-CE-5342)  

Broader source: Energy.gov [DOE]

DOE ordered Duracold Refrigeration Manufacturing Company, LLC to pay a $8,000 civil penalty after finding Duracold Refrigeration Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

346

Simulation Model Driven Engineering for Manufacturing Cell  

E-Print Network [OSTI]

Simulation Model Driven Engineering for Manufacturing Cell Hironori Hibino1 , Toshihiro Inukai2 Abstract. In our research, the simulation model driven engineering for manufacturing cell (SMDE on the simulation model and to extend the range of control applications and simulation applications using the PC

Paris-Sud XI, Université de

347

A harvest failure approach to assess the threat from an invasive species Denys Yemshanov a,*, Daniel W. McKenney a,1  

E-Print Network [OSTI]

,*, Daniel W. McKenney a,1 , Peter de Groot a,2 , Dennis Haugen b,3 , John Pedlar a , Derek Sidders c,4

348

Daniel RIVET, Le Maroc de Lyautey Mohammed V Le double visage du Protectorat,  

E-Print Network [OSTI]

Daniel RIVET, Le Maroc de Lyautey à Mohammed V Le double visage du Protectorat, Paris, �ditions la publication de sa thèse monumentale (Lyautey et l'institution du Protectorat français au Maroc ambitions initales. Dans l'esprit des Annales de l'époque braudélienne, "Mon Lyautey au Maroc aurait été un

Paris-Sud XI, Université de

349

Education for the ManufacturingEducation for the Manufacturing Industries of the FutureIndustries of the Future  

E-Print Network [OSTI]

Growth. Every $1.00 in manufactured goods generates an additional $1.43 worth of additional economic© ATI 2006 Education for the ManufacturingEducation for the Manufacturing Industries of the FutureIndustries of the Future presented to thepresented to the 2006 MIT Manufacturing Summit:2006 MIT Manufacturing Summit

Brock, David

350

High Temperature Fuel Cell (Phosphoric Acid) Manufacturing R...  

Broader source: Energy.gov (indexed) [DOE]

Fuel Cell (Phosphoric Acid) Manufacturing R&D High Temperature Fuel Cell (Phosphoric Acid) Manufacturing R&D Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop...

351

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION  

E-Print Network [OSTI]

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION In this course you product development and innovation. You will develop a rich knowledge of additive manufacturing processes enabling advanced/additive manufacturing and personal fabrication. You will have the opportunity

Schumacher, Russ

352

Additive Manufacturing in China: Threats, Opportunities, and Developments (Part I)  

E-Print Network [OSTI]

application of additive manufacturing in China’s aviationAnalysis May 2013 Additive Manufacturing in China: Threats,an overview of China’s additive manufacturing industry is

ANDERSON, Eric

2013-01-01T23:59:59.000Z

353

Faculty Position in Ultra High Precision Robotics & Manufacturing  

E-Print Network [OSTI]

, manipulation and metrology systems targeting additive manufacturing; · New kinematics, quasi-perfect guidings, actuators, transmission systems, sensors and methods targeting ultra-high precision additive manufacturingFaculty Position in Ultra High Precision Robotics & Manufacturing at the Ecole Polytechnique

Candea, George

354

A Quantitative Study of the Impact of Additive Manufacturing in the Aircraft Spare Parts Supply Chain.  

E-Print Network [OSTI]

??Additive manufacturing is a promising manufacturing technology which is finding its way into mainstream manufacturing industry. As compared to conventional manufacturing it has a number… (more)

Mokasdar, Abhiram S., M.S.

2012-01-01T23:59:59.000Z

355

E-Print Network 3.0 - automated manufacturing systems Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

by delighting the customers. IIMC Manufacturing Systems & Technology Manufacturing... in manufacturing, Awareness of green production and Big R in manufacturing IIT Automation &...

356

Unlocking the Potential of Additive Manufacturing in the Fuel...  

Energy Savers [EERE]

Manufacturing in the Fuel Cells Industry Download presentation slides from the DOE Fuel Cell Technologies Office webinar "Additive Manufacturing for Fuel Cells" held on...

357

EA-1834: Severstal Dearborn Advanced Technology Vehicle Manufacturing...  

Broader source: Energy.gov (indexed) [DOE]

4: Severstal Dearborn Advanced Technology Vehicle Manufacturing Project in Dearborn, MI EA-1834: Severstal Dearborn Advanced Technology Vehicle Manufacturing Project in Dearborn,...

358

Celgard US Manufacturing Facilities Initiative for Lithium-ion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Celgard US Manufacturing Facilities Initiative for Lithium-ion Battery Separator Celgard US Manufacturing Facilities Initiative for Lithium-ion...

359

Manufacturing Metrology for c-Si Module Reliability/Durabiltiy...  

Broader source: Energy.gov (indexed) [DOE]

Manufacturing Metrology for c-Si Module ReliabilityDurabiltiy Manufacturing Metrology for c-Si Module ReliabilityDurabiltiy Presented at the PV Module Reliability Workshop,...

360

Join Us for the Clean Energy Manufacturing Initiative's Western...  

Energy Savers [EERE]

resources, as well as best practices and cutting-edge technologies, to boost energy productivity across the entire U.S. manufacturing supply chain will make our manufacturing...

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Manufacturing R&D of PEM Fuel Cells  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

for the Hydrogen Economy Manufacturing Research & Development of PEM Fuel Cell Systems for Transportation Applications Background Material for the Manufacturing R&D Workshop to be...

362

Energy Use Loss and Opportunities Analysis: U.S. Manufacturing...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Use Loss and Opportunities Analysis: U.S. Manufacturing & Mining Energy Use Loss and Opportunities Analysis: U.S. Manufacturing & Mining energyuselossopportunitiesanalys...

363

DOE Initiates Enforcement Actions Against 4 Showerhead Manufacturers...  

Energy Savers [EERE]

Against 4 Showerhead Manufacturers (Notice of Proposed Civil Penalty and Requests for Test Data Issued) DOE Initiates Enforcement Actions Against 4 Showerhead Manufacturers...

364

Letter from Plumbing Manufacturers Institute to Department of...  

Broader source: Energy.gov (indexed) [DOE]

Letter from Plumbing Manufacturers Institute to Department of Energy re: Ex Parte Communication More Documents & Publications Supplemental Comments of the Plumbing Manufacturers...

365

allergenic extract manufacturers: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tax applies to the sale of manufacturing aids such as dies, patterns, jigs and tooling used in the manufacturing process notwithstanding the fact that the property used in...

366

Wind Program Manufacturing Research Advances Processes and Reduces...  

Energy Savers [EERE]

Wind Program Manufacturing Research Advances Processes and Reduces Costs Wind Program Manufacturing Research Advances Processes and Reduces Costs March 31, 2014 - 11:22am Addthis...

367

Local Program Helps Alabama Manufacturers Add Jobs, Reduce Waste...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Local Program Helps Alabama Manufacturers Add Jobs, Reduce Waste and Increase Profits Local Program Helps Alabama Manufacturers Add Jobs, Reduce Waste and Increase Profits April 8,...

368

Direct Hydrogen PEMFC Manufacturing Cost Estimation for Automotive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Direct Hydrogen PEMFC Manufacturing Cost Estimation for Automotive Applications: Fuel Cell Tech Team Review Direct Hydrogen PEMFC Manufacturing Cost Estimation for Automotive...

369

Energy Department to Work with National Association of Manufacturers...  

Office of Environmental Management (EM)

to Work with National Association of Manufacturers to Increase Industrial Energy Efficiency Energy Department to Work with National Association of Manufacturers to Increase...

370

An exploration of materials and methods in manufacturing : shoreline membranes  

E-Print Network [OSTI]

This thesis is an investigation into the design methodologies and ideologies of manufacturing processes specifically related to automotive design. The conceptualization, prototyping, testing, and manufacturing of cars is ...

Chin, Ryan C. C., 1974-

2000-01-01T23:59:59.000Z

371

Joint Fuel Cell Technologies and Advanced Manufacturing Webinar...  

Broader source: Energy.gov (indexed) [DOE]

Joint Fuel Cell Technologies and Advanced Manufacturing Webinar Joint Fuel Cell Technologies and Advanced Manufacturing Webinar Presentation slides from the joint Fuel Cell...

372

20% Wind Energy by 2030 - Chapter 3: Manufacturing, Materials...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

3: Manufacturing, Materials, and Resources Summary Slides 20% Wind Energy by 2030 - Chapter 3: Manufacturing, Materials, and Resources Summary Slides Summary Slides for Chapter 3:...

373

Proceedings from the Wind Manufacturing Workshop: Achieving 20...  

Office of Environmental Management (EM)

Proceedings from the Wind Manufacturing Workshop: Achieving 20% Wind Energy in the U.S. by 2030, May 2009 Proceedings from the Wind Manufacturing Workshop: Achieving 20% Wind...

374

Commonwealth Aluminum: Manufacturer Conducts Plant-Wide Energy...  

Broader source: Energy.gov (indexed) [DOE]

Commonwealth Aluminum: Manufacturer Conducts Plant-Wide Energy Assessments at Two Aluminum Sheet Production Operations Commonwealth Aluminum: Manufacturer Conducts Plant-Wide...

375

Upcoming Webinar February 11: Additive Manufacturing for Fuel...  

Broader source: Energy.gov (indexed) [DOE]

February 11: Additive Manufacturing for Fuel Cells Upcoming Webinar February 11: Additive Manufacturing for Fuel Cells February 6, 2014 - 12:00am Addthis On Tuesday, February 11,...

376

Webinar: Additive Manufacturing for Fuel Cells | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Additive Manufacturing for Fuel Cells Webinar: Additive Manufacturing for Fuel Cells February 11, 2014 5:00PM to 6:00PM EST Online...

377

A Review of Engineering Research in Sustainable Manufacturing  

E-Print Network [OSTI]

focused on sustainable processes and systems. Despite recentto make their processes more sustainable, evaluating theirManufacturing Process Design for Sustainable Manufacturing,”

2013-01-01T23:59:59.000Z

378

AMO Issues Request for Information on Clean Energy Manufacturing...  

Energy Savers [EERE]

Request for Information on Clean Energy Manufacturing Topics, Including Fuel Cell and Hydrogen Applications AMO Issues Request for Information on Clean Energy Manufacturing Topics,...

379

Purdue, GE Collaborate On Advanced Manufacturing | GE Global...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the production side. For manufacturing operations the size of GE's, just a 1 percent improvement in manufacturing productivity would save 500 million." GE and Purdue have been...

380

Stronger Manufacturers' Energy Efficiency Standards for Residential...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2006 - 11:09am Addthis WASHINGTON, DC -- To increase the energy efficiency of residential air conditioners, the U.S. Department of Energy (DOE) has issued new manufacturing...

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Cycle to Cycle Manufacturing Process Control  

E-Print Network [OSTI]

Most manufacturing processes produce parts that can only be correctly measured after the process cycle has been completed. Even if in-process measurement and control is possible, it is often too expensive or complex to ...

Hardt, David E.

382

Sandia National Laboratories: Numerical Manufacturing And Design...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NuMAD (Numerical Manufacturing And Design) is an open-source software tool written in Matlab which simplifies the process of creating a three-dimensional model of a wind turbine...

383

Steam System Improvements at a Manufacturing Plant  

E-Print Network [OSTI]

BWX Technologies, Naval Nuclear Fuel Division (NNFD) is a manufacturing company with a steam system consisting of two Babcock & Wilcox boilers and approximately 350 steam traps. The steam system is used to produce and distribute steam for space...

Compher, J.; Morcom, B.

384

Goodman Manufacturing: Noncompliance Determination (2011-SE-4301)  

Broader source: Energy.gov [DOE]

DOE issued a Notice of Noncompliance Determination to Goodman Manufacturing finding that model CPC180XXX3BXXXAA (CPC180*) of commercial package air conditioner does not comport with the energy conservation standards.

385

Requirements & Status for Volume Fuel Cell Manufacturing  

E-Print Network [OSTI]

Requirements & Status for Volume Fuel Cell Manufacturing DOE Hydrogen Program, Washington, DC July ­Eliminate components, parts and process steps ­Standardize core components across products ­Standardize non-core

386

4D printing : towards biomimetic additive manufacturing  

E-Print Network [OSTI]

Inherent across all scales in Nature's material systems are multiple design dimensions, the existences of which are products of both evolution and environment. In human manufacturing where design must be preconceived and ...

Tsai, Elizabeth Yinling

2013-01-01T23:59:59.000Z

387

Cost Effective Cooling Strategies for Manufacturing Facilities  

E-Print Network [OSTI]

there are many similarities. In addition to the above environmental conditions for the process/machines and workers, cost effective design of manufacturing facilities must also address maintainability, sanitation, durability, energy conservation and budgetary...

Kumar, R.

388

Lane Electric Cooperative- Manufactured Homes Rebate Program  

Broader source: Energy.gov [DOE]

Lane Electric Cooperative offers customers an incentive for buying a new EnergyStar manufactured home. These properties must be within the eligible service area and must be a permanent residence....

389

Energy-Efficient Appliance Manufacturing Tax Credit  

Broader source: Energy.gov [DOE]

'''''Note: This tax credit expired at the end of 2011. The American Taxpayer Relief Act of 2012 retroactively renewed this tax credit for certain appliances manufactured in 2012 and 2013. '''''

390

Photographic lens manufacturing and production technologies  

E-Print Network [OSTI]

An investigation was conducted to determine the methods and processes required for the manufacture of photographic objective lenses. Production of photographic lenses requires incredible precision in the melting, mixing, ...

Kubaczyk, Daniel Mark

2011-01-01T23:59:59.000Z

391

Analyzing sampling methodologies in semiconductor manufacturing  

E-Print Network [OSTI]

This thesis describes work completed during an internship assignment at Intel Corporation's process development and wafer fabrication manufacturing facility in Santa Clara, California. At the highest level, this work relates ...

Anthony, Richard M. (Richard Morgan), 1971-

2004-01-01T23:59:59.000Z

392

Advanced Manufacturing Partnership | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

and cost-shared R&D projects, supporting manufacturing infrastructure, and facilitating job creation. These actions save energy and provide benefits to U.S. industry and the...

393

Clean Energy Technology Device Manufacturers' Credits (Delaware)  

Broader source: Energy.gov [DOE]

Qualified manufacturers can apply for a tax break equal to 75% of the corporation income tax. The incentive is an increase from the Investment and Employment Credit Against Corporation Income Tax,...

394

Refrigerator Manufacturers: Proposed Penalty (2013-CE-5341)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that Refrigerator Manufacturers, LLC failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

395

Utilizing Daylighting Controls in a Manufacturing Facility  

E-Print Network [OSTI]

Utilizing Daylighting Controls in a Manufacturing Facility Som S. Shrestha Dr. Gregory M. Maxwell PhD Candidate Associate Professor som@iastate.edu gmaxwell@iastate.edu Iowa State University Ames, IA ABSTRACT Opportunities exist... to reduce artificial lighting in manufacturing facilities which have skylights and/or fenestration that provide sufficient quantities of daylight to the work space. Using photometric sensors to measure the illuminance in the space, artificial lights can...

Shrestha, S. S.; Maxwell, G. M.

396

Energetic additive manufacturing process with feed wire  

DOE Patents [OSTI]

A process for additive manufacture by energetic wire deposition is described. A source wire is fed into a energy beam generated melt-pool on a growth surface as the melt-pool moves over the growth surface. This process enables the rapid prototyping and manufacture of fully dense, near-net shape components, as well as cladding and welding processes. Alloys, graded materials, and other inhomogeneous materials can be grown using this process.

Harwell, Lane D. (Albuquerque, NM); Griffith, Michelle L. (Albuquerque, NM); Greene, Donald L. (Corrales, NM); Pressly, Gary A. (Sandia Park, NM)

2000-11-07T23:59:59.000Z

397

Manufacturing Demonstration Facilities Workshop, March 12, 2012  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department of Energy Low-TemperatureEnergy Maine09ManufacturingManufacturing

398

MCM-C Multichip Module Manufacturing Guide  

SciTech Connect (OSTI)

Honeywell Federal Manufacturing & Technologies (FM&T) provides complete microcircuit capabilities from design layout through manufacturing and final electrical testing. Manufacturing and testing capabilities include design layout, electrical and mechanical computer simulation and modeling, circuit analysis, component analysis, network fabrication, microelectronic assembly, electrical tester design, electrical testing, materials analysis, and environmental evaluation. This document provides manufacturing guidelines for multichip module-ceramic (MCM-C) microcircuits. Figure 1 illustrates an example MCM-C configuration with the parts and processes that are available. The MCM-C technology is used to manufacture microcircuits for electronic systems that require increased performance, reduced volume, and higher density that cannot be achieved by the standard hybrid microcircuit or printed wiring board technologies. The guidelines focus on the manufacturability issues that must be considered for low-temperature cofired ceramic (LTCC) network fabrication and MCM assembly and the impact that process capabilities have on the overall MCM design layout and product yield. Prerequisites that are necessary to initiate the MCM design layout include electrical, mechanical, and environmental requirements. Customer design data can be accepted in many standard electronic file formats. Other requirements include schedule, quantity, cost, classification, and quality level. Design considerations include electrical, network, packaging, and producibility; and deliverables include finished product, drawings, documentation, and electronic files.

Blazek, R.J.; Kautz, D.R.; Galichia, J.V.

2000-11-20T23:59:59.000Z

399

Sporting Good Manufacturing Company: Optimal Manufacturing and Shipping Cost Through Linear Programming Models  

E-Print Network [OSTI]

Figure 15: Example Transshipment Model.............................................................................. 18 vi List of Principal Symbols and Nomenclature SGMC Sporting Good Manufacturing Company LP Linear Programming CEO Chief... Executive Officer COO Chief Operation Officer PKR Pakistani Rupees EMGT Engineering Management O.F. Objective Function A i No. of bats manufactured in factory i; where i = k, l BB i No. of Stumps manufactured in factory i; where i = k, l C i No...

Malik, Ejaz

2009-05-15T23:59:59.000Z

400

Small Manufacturer Strategic Decision Making Assistance Tool (SMSDM): a Case Study of a Small Oklahoma Manufacturer.  

E-Print Network [OSTI]

??The propose was to design an informative analytical tool for small Oklahoma manufacturing firms that would assist in their strategic planning and decision making processes.… (more)

Robertson, William D.

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

A Unified Approach for Integrated Computer-Aided Design and Manufacturing  

E-Print Network [OSTI]

approved Jenn-Ming Yang Rajit Gadh Tsu-Chin Tsao Daniel C.Faloutsos, Professor Rajit Gadh and Professor Tsu-Chin Tsao

Huang, Bin

2013-01-01T23:59:59.000Z

402

Faculty Position in Multi-scale Manufacturing Technologies  

E-Print Network [OSTI]

-precision additive manufacturing technologies; · multi-scale micro-precision manufacturing; · high throughput. Christian Enz Search Committee Chair E-mail: manufacturing-search@epfl.ch For additional information on EPFLFaculty Position in Multi-scale Manufacturing Technologies at the Ecole polytechnique fédérale de

Psaltis, Demetri

403

Accepted Manuscript Sustainable manufacturing: Evaluation and Modeling of  

E-Print Network [OSTI]

in additive manufacturing Florent Le Bourhisa · Olivier Kerbrata Jean-Yves Hascoeta · Pascal Mognola Accepted of manufacturing processes where great amounts of energy and materials are being consumed. Nowadays, additive manufacturing technologies such as Direct Additive Laser Manufac- turing allow us to manufacture functional

Paris-Sud XI, Université de

404

Introduction! Low Cost, High Volume, Scale-up Photovoltaic Manufacturing!  

E-Print Network [OSTI]

Introduction! Low Cost, High Volume, Scale-up Photovoltaic Manufacturing! Prof. Shreyes Melkote, Manufacturing Research Center, Georgia Institute of Technology Photovoltaics (PV) will be part of the energy mix volume PV manufacturing, therefore to reduce manufacturing cost and accelerate PV use. ! q Silicon wafer

Das, Suman

405

Simultaneous Tolerance Synthesis for Manufacturing and Quality B. Ye, Department of Industrial and Manufacturing Systems Engineering  

E-Print Network [OSTI]

to component dimension i CT total cost of manufacturing and quality Cpi capability index of last process, and quality, for the sake of achieving a minimal total cost and reducing lead-time. However, in existing workSimultaneous Tolerance Synthesis for Manufacturing and Quality B. Ye, Department of Industrial

Salustri, Filippo A.

406

A Study in the Criticism of Prose Fiction from Daniel Defoe to Jane Austen  

E-Print Network [OSTI]

Goldsmith a line or two of attention but little appreciation. She says t^ e Vicar of wakefield "is a work of great merit and greit faults, but must ever afford both pleasure and benefit to a good heart". With all her haste to dispose of the book, she..., 1912. BIBLIOGRAPHY. Ascham, Roger: The Schoolmaster. Arber Reprints, Birmingham, lS6S. Boswell, James: Life of Johnson. Groker edition ISS7. Defoe, Daniel: Novels, and Prefaces, Bohn Library, George Bell and Son, London, 1889. Dobson, Austin...

Ise, Hulda L.

1912-06-01T23:59:59.000Z

407

Crisp Boundary Detection Using Pointwise Mutual Information (PMI) Phillip Isola, Daniel Zoran, Dilip Krishnan, Edward Adelson  

E-Print Network [OSTI]

Crisp Boundary Detection Using Pointwise Mutual Information (PMI) Phillip Isola, Daniel Zoran Luminance A LuminanceB log P(A,B) 0 0.5 1 0 0.2 0.4 0.6 0.8 1 4.65 4.7 4.75 4.8 Luminance A PMI(A,B) 0 0.5 1 related to pointwise mutual information: PMI(A, B) = log P(A, B) P(A)P(B) . (3) When = 1, PMI

Oliva, Aude

408

Dr. Daniel A. Hitchcock | U.S. DOE Office of Science (SC)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesDataTranslocationDiurnal CycleDonald1 Jul 20022 InPress) Dr. Daniel

409

Advanced Blade Manufacturing Project - Final Report  

SciTech Connect (OSTI)

The original scope of the project was to research improvements to the processes and materials used in the manufacture of wood-epoxy blades, conduct tests to qualify any new material or processes for use in blade design and subsequently build and test six blades using the improved processes and materials. In particular, ABM was interested in reducing blade cost and improving quality. In addition, ABM needed to find a replacement material for the mature Douglas fir used in the manufacturing process. The use of mature Douglas fir is commercially unacceptable because of its limited supply and environmental concerns associated with the use of mature timber. Unfortunately, the bankruptcy of FloWind in June 1997 and a dramatic reduction in AWT sales made it impossible for ABM to complete the full scope of work. However, sufficient research and testing were completed to identify several promising changes in the blade manufacturing process and develop a preliminary design incorporating these changes.

POORE, ROBERT Z.

1999-08-01T23:59:59.000Z

410

Photovoltaic Manufacturing Technology, Phase 1, Final report  

SciTech Connect (OSTI)

This report examines the cost-effective manufacture of dendritic-web-based photovoltaic modules. It explains how process changes can increase production and reduce manufacturing costs. Long-range benefits of these improved processes are also discussed. Problems are identified that could impede increasing production and reducing costs; approaches to solve these problems are presented. These approaches involve web growth throughput, cell efficiency, process yield, silicon use, process control, automation, and module efficiency. Also discussed are the benefits of bifacial module design, unique to the dendritic web process.

Easoz, J.R.; Herlocher, R.H. (Westinghouse Electric Corp., Pittsburgh, PA (United States))

1991-12-01T23:59:59.000Z

411

Manufacturing improvements in the Photovoltaic Manufacturing Technology (PVMaT) Project  

SciTech Connect (OSTI)

The Photovoltaic Manufacturing Technology Project (PVMaT) is a government/industry research and development (R and D) partnership between the US federal government (through the US Department of Energy [DOE]) and members of the US PV industry. The goals of PVMaT are to help the US PV industry improve module manufacturing processes and equipment; accelerate manufacturing cost reductions for PV modules, balance-of-systems components, and integrated systems; increase commercial product performance and reliability; and enhance the investment opportunities for substantial scale-ups of US-based PV manufacturing plant capacities. The approach for PVMaT has been to cost-share risk taking by industry as it explores new manufacturing options and ideas for improved PV modules and other components, advances system and product integration, and develops new system designs, all of which will lead to overall reduced system life-cycle costs for reliable PV end products. The PVMaT Phase 4A module manufac turing R and D projects are just being completed, and initial results for the work directed primarily to module manufacture are reported in this paper. Fourteen new Phase 5A subcontracts have also just been awarded, and planned R and D areas for the ten focused on module manufacture are described. Finally, government funding, subcontractor cost-sharing, and a comparison of the relative efforts by PV technology throughout the PVMaT project are presented.

Witt, C.E.; Mitchell, R.L.; Thomas, H.P.; Symko, M.I. [National Renewable Energy Lab., Golden, CO (United States); King, R. [Dept. of Energy, Washington, DC (United States); Ruby, D.S. [Sandia National Labs., Albuquerque, NM (United States)

1998-08-01T23:59:59.000Z

412

Thermal neutron shield and method of manufacture  

DOE Patents [OSTI]

A thermal neutron shield comprising boron shielding panels with a high percentage of the element Boron. The panel is least 46% Boron by weight which maximizes the effectiveness of the shielding against thermal neutrons. The accompanying method discloses the manufacture of boron shielding panels which includes enriching the pre-cursor mixture with varying grit sizes of Boron Carbide.

Metzger, Bert Clayton; Brindza, Paul Daniel

2014-03-04T23:59:59.000Z

413

Thermal neutron shield and method of manufacture  

DOE Patents [OSTI]

A thermal neutron shield comprising concrete with a high percentage of the element Boron. The concrete is least 54% Boron by weight which maximizes the effectiveness of the shielding against thermal neutrons. The accompanying method discloses the manufacture of Boron loaded concrete which includes enriching the concrete mixture with varying grit sizes of Boron Carbide.

Brindza, Paul Daniel; Metzger, Bert Clayton

2013-05-28T23:59:59.000Z

414

REMEDIAT1NG AT MANUFACTURED GAS  

E-Print Network [OSTI]

, comhusti- hle gas manufactured Pfrom coke, coal, and oil 1 served as the major gas- eous fuel for urban for the three primary gas production meth- ods: coal carbonization, carbureted water gas production, and oil gas, and metals. Tar resid- uals were produced from the vola- tiIe component of bituminous coals in coal

Peters, Catherine A.

415

Flow Battery System Design for Manufacturability.  

SciTech Connect (OSTI)

Flow battery energy storage systems can support renewable energy generation and increase energy efficiency. But, presently, the costs of flow battery energy storage systems can be a significant barrier for large-scale market penetration. For cost- effective systems to be produced, it is critical to optimize the selection of materials and components simultaneously with the adherence to requirements and manufacturing processes to allow these batteries and their manufacturers to succeed in the market by reducing costs to consumers. This report analyzes performance, safety, and testing requirements derived from applicable regulations as well as commercial and military standards that would apply to a flow battery energy storage system. System components of a zinc-bromine flow battery energy storage system, including the batteries, inverters, and control and monitoring system, are discussed relative to manufacturing. The issues addressed include costs and component availability and lead times. A service and support model including setup, maintenance and transportation is outlined, along with a description of the safety-related features of the example flow battery energy storage system to promote regulatory and environmental, safety, and health compliance in anticipation of scale manufacturing.

Montoya, Tracy Louise; Meacham, Paul Gregory; Perry, David; Broyles, Robin S.; Hickey, Steven; Hernandez, Jacquelynne

2014-10-01T23:59:59.000Z

416

Optimal Preventive Maintenance Scheduling in Semiconductor Manufacturing  

E-Print Network [OSTI]

1 Optimal Preventive Maintenance Scheduling in Semiconductor Manufacturing Xiaodong Yao, Emmanuel on Control Applications in 2001. #12;2 Abstract Preventive Maintenance (PM) scheduling is a very challenging schedule with that of a baseline reference schedule are also presented. Index Terms preventive maintenance

Marcus, Steven I.

417

Pollution Prevention and Lean Manufacturing Paper # 360  

E-Print Network [OSTI]

Pollution Prevention and Lean Manufacturing Paper # 360 Harry W. Edwards and Jason M. Jonkman, the CSU IAC promotes energy conservation, pollution prevention, and productivity improvement. During that generated a total of 467 assessment recommendations (ARs) with pollution prevention benefits. Such benefits

418

Faculty of Engineering Industrial and Manufacturing  

E-Print Network [OSTI]

Faculty of Engineering Industrial and Manufacturing Systems Engineering Industrial engineers answer the needs of organizations to operate efficiently and cost effectively. As an industrial engineer, you may of Windsor is one of only a few institutions in Ontario to offer industrial engineering. Your education

419

Automatically Generating Plans for Manufacturing* Billy Harris  

E-Print Network [OSTI]

Automatically Generating Plans for Manufacturing* Billy Harris Diane J. Cook Frank Lewis§ January of action. ORGANIZATION LEVEL COORDINATION LEVEL EXECUTION LEVEL A B S T R A C T I O N P R E C I S I O N

Cook, Diane J.

420

International photovoltaic products and manufacturers directory, 1995  

SciTech Connect (OSTI)

This international directory of more than 500 photovoltaic-related manufacturers is intended to guide potential users of photovoltaics to sources for systems and their components. Two indexes help the user to locate firms and materials. A glossary describes equipment and terminology commonly used in the photovoltaic industry.

Shepperd, L.W. [ed.] [Florida Solar Energy Center, Cocoa, FL (United States)] [ed.; Florida Solar Energy Center, Cocoa, FL (United States)

1995-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Advanced Manufacturing: Using Composites for Clean Energy  

Broader source: Energy.gov [DOE]

Advanced fiber-reinforced polymer composites, which combine strong fibers with tough plastics, are lighter and stronger than steel. These materials could lower overall production costs in U.S. manufacturing and ultimately drive the adoption of a new clean energy way of life.

422

Manufacturing Fuel Pellets from Biomass Introduction  

E-Print Network [OSTI]

Manufacturing Fuel Pellets from Biomass Introduction Wood pellets have increased tremendously pellet stoves or boilers over traditional wood-fired equipment due to their relative ease of use. As a result, the demand for fuel pellets has also grown quickly. However, wood is not the only suitable

Boyer, Elizabeth W.

423

Manufacturability-Aware Physical Layout Optimizations  

E-Print Network [OSTI]

design. To really bridge the gap between design and manufacturing, it is important to model and feed As VLSI technology continues to scale down to nanometer dimensions, the semiconductor industry is greatly reason is due to extensive usage of RET. The semiconductor industry is adopting the immersion lithography

Pan, David Z.

424

Montana Manufacturing Center www.mtmanufacturingcenter.com  

E-Print Network [OSTI]

on. A Six Sigma project guided by a Field Engi- neer from the Montana Manufacturing Extension Center with Worrest serving as project lead and Six Sigma Coach. Reid considers Worrest a business coach and has used is much better, the company is carrying less inventory, and it is benefiting in other ways. Six Sigma

Dyer, Bill

425

Summit Manufacturing: Noncompliance Determination (2010-SE-0303)  

Broader source: Energy.gov [DOE]

DOE issued a Notice of Noncompliance Determination to Summit Manufacturing, Inc. finding that 4SHP13LE136P + 15001+CA042A964+TDR basic model, a split-system air conditioning heat pump with a heat pump coil, does not comport with the energy conservation standards.

426

Method and apparatus for manufacturing gas tags  

DOE Patents [OSTI]

For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases.

Gross, Kenny C. (Bolingbrook, IL); Laug, Matthew T. (Idaho Falls, ID)

1996-01-01T23:59:59.000Z

427

Method and apparatus for manufacturing gas tags  

DOE Patents [OSTI]

For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases. 4 figs.

Gross, K.C.; Laug, M.T.

1996-12-17T23:59:59.000Z

428

RENEWABLE ENERGY: A VIABLE CHOICE By Antonia V. Herzog, Timothy E. Lipman, Jennifer L. Edwards, and Daniel M. Kammen  

E-Print Network [OSTI]

RENEWABLE ENERGY: A VIABLE CHOICE By Antonia V. Herzog, Timothy E. Lipman, Jennifer L. Edwards, and Daniel M. Kammen Published in Environment, Vol. 43 No. 10 (December 2001) Renewable energy systems in transmission and distribution. A strong national energy policy is now needed. Renewable technologies have

Kammen, Daniel M.

429

Publications Daniel Kost 1. D. Kost, "Principles of Organic Chemistry" a study unit textbook. Open University, Tel Aviv,  

E-Print Network [OSTI]

- 1 - Publications Daniel Kost (A) Books 1. D. Kost, "Principles of Organic Chemistry" a study unit, "Hypervalent Silicon Compounds", Invited chapter in "The Chemistry of Organic Silicon Compounds", Z. Rappoport and Chiroptical Properties", Invited chapter in "The Chemistry of Sulfenic Acids and Their Derivatives", S. Patai

Vardi, Amichay

430

Automotive Cyber Physical Systems in the Context of Human Mobility Daniel Work, Alexandre Bayen, and Quinn Jacobson  

E-Print Network [OSTI]

Automotive Cyber Physical Systems in the Context of Human Mobility Daniel Work, Alexandre Bayen with other technologies. In the larger context of human mobility, the automotive CPS must become more open in the surrounding physical environment. II. FUNDAMENTAL LIMITATIONS OF THE EXISTING AUTOMOTIVE CYBER PHYSICAL SYSTEM

431

Advances in the mapping of flow networks from digital elevation data David G Tarboton* and Daniel P Ames**  

E-Print Network [OSTI]

computer power available in personal computers with the capability to rapidly download and process digital1 Advances in the mapping of flow networks from digital elevation data David G Tarboton* and Daniel Congress, May 20- 24,2001, Orlando, Florida.] Abstract Digital elevation models (DEMs) are a useful data

Tarboton, David

432

Battery Powered Electric Car, Using Photovoltaic Cells Assistance Juan Dixon, Alberto Ziga, Angel Abusleme and Daniel Soto  

E-Print Network [OSTI]

Battery Powered Electric Car, Using Photovoltaic Cells Assistance Juan Dixon, Alberto Zúñiga, Angel Vehicles (EVs) is the scarce capacity of conventional electrical energy storage systems. Although Abusleme and Daniel Soto Abstract One of the major problems for the massive applicability of Electric

Catholic University of Chile (Universidad CatĂłlica de Chile)

433

Density Functional Theory with Correct Long-Range Asymptotic Behavior Roi Baer1,* and Daniel Neuhauser2,  

E-Print Network [OSTI]

Density Functional Theory with Correct Long-Range Asymptotic Behavior Roi Baer1,* and Daniel within density functional theory (DFT) which spawns a class of approximations leading to correct long.043002 PACS numbers: 31.15.Ew, 31.15.Ne, 31.25.Eb, 71.15.Mb Density functional theory (DFT) [1,2] is an in

Baer, Roi

434

Power Balance in a Helicon Plasma Source for Space Propulsion Daniel B. White Jr., Manuel Martinez-Sanchez  

E-Print Network [OSTI]

-Sanchez June 2008 SSL # 9-08 #12;#12;1 Power Balance in a Helicon Plasma Source for Space Propulsion Daniel B. White Jr., Manuel Martinez-Sanchez June 2008 SSL # 9-08 This work is based on the unaltered text

435

Cloud top microphysics as a tool for precipitation measurements Daniel Rosenfeld, Hebrew University of Jerusalem, Jerusalem, Israel  

E-Print Network [OSTI]

Cloud top microphysics as a tool for precipitation measurements Daniel Rosenfeld, Hebrew University of the electromagnetic radiation that is scattered and emitted from the clouds, precipitation and the underlying surface with the cloud and precipitation particles strongly depends on their composition and size distribution

Daniel, Rosenfeld

436

Investigations into Tandem Acoustic Modeling for the Aurora Task Daniel P.W. Ellis and Manuel J. Reyes Gomez  

E-Print Network [OSTI]

Investigations into Tandem Acoustic Modeling for the Aurora Task Daniel P.W. Ellis and Manuel J relative error rate reduc- tions of 30% or more on the Aurora task, as well as support- ing feature stream are reported on the Aurora-2000 noisy digits task. 1. Introduction The 1999 ETSI Aurora evaluation of proposed

Ellis, Dan

437

Cours Titre Professeur Horaire Local examen LNG 1010 Langage et cognition Daniel Valois Jeudi 16 h 19 h  

E-Print Network [OSTI]

Local Cours Titre Professeur Horaire Local examen LNG 1010 Langage et cognition Daniel Valois Jeudi 16 h à 19 h LNG 1080 Lexicologie, sémantique et morphologie Mireille Tremblay Vendredi 8 h 30 à 11 h 30 LNG 1120 Histoire de la langue française Lundi 8 h 30 à 11 h 30 LNG 1125 Temps et espaces

Parrott, Lael

438

Hybrid Modeling of Communication Networks Using Modelica Daniel Farnqvist, Katrin Strandemar, Karl Henrik Johansson, and Jo~ao Pedro Hespanha  

E-Print Network [OSTI]

Hybrid Modeling of Communication Networks Using Modelica Daniel F¨arnqvist, Katrin Strandemar networks using Modelica is discussed. Congestion control in packet-switched networks, such as the Internet, by develop- ing a model library based on a recent hybrid systems model, that Modelica provides an efficient

Hespanha, Joăo Pedro

439

Near infrared 3~~ overtone band of Hl Brian F. Ventrudo and Daniel T. Cassidy  

E-Print Network [OSTI]

Near infrared 3~~ overtone band of Hl Brian F. Ventrudo and Daniel T. Cassidy Department transitions. Short-external-cavity InCaAsP diodes were used as tunable near infrared radiation sources and understand the spectrum of vibra- tional excited states. This paper updates the list of observed near-infrared

Oka, Takeshi

440

A Policy Engine For Spectrum Sharing Grit Denker, Daniel Elenius, Rukman Senanayake, Mark-Oliver Stehr, David Wilkins  

E-Print Network [OSTI]

A Policy Engine For Spectrum Sharing Grit Denker, Daniel Elenius, Rukman Senanayake, Mark--We argue for a policy-based approach to increase spectrum availability. To this extend, we briefly summarize a new language for expressing policies that allow opportunistic spectrum access. A Policy Reasoner

Wilkins, David E.

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Structure and Dynamics of Biological Systems Research Team: James E. Evans, Daniel E. Perea, Xiao-Ying Yu, Zihua Zhu  

E-Print Network [OSTI]

Structure and Dynamics of Biological Systems Research Team: James E. Evans, Daniel E. Perea, Xiao for atomic resolution structure determination; observe dynamics using a pump-probe regime. Dynamic TEM probe tomography to interrogate the structure and dynamics of biological systems

442

On the Vertical Decay Rate of the Maximum Tangential Winds in Tropical Cyclones DANIEL P. STERN* AND DAVID S. NOLAN  

E-Print Network [OSTI]

On the Vertical Decay Rate of the Maximum Tangential Winds in Tropical Cyclones DANIEL P. STERN independent of both the maximum wind speed and the radius of maximum winds (RMW). This can be seen winds change with height. Above 2-km height, vertical profiles of Vmaxnorm are nearly independent

Nolan, David S.

443

KYDEX, LLC Inventory Accuracy Project Recap Summary Brett Moyer, Daniel Shen, Shreyank Patel, Sidra Maryam, Yuxiang Zhang  

E-Print Network [OSTI]

KYDEX, LLC Inventory Accuracy Project Recap Summary Brett Moyer, Daniel Shen, Shreyank Patel, Sidra, of this project was to improve the accuracy of the inventory system from 30% to 75%. After conducting site visits and analyzing the scrap inventory data and the movement of scrap material, a list of improvement targets

Demirel, Melik C.

444

The Rate-and State-Dependence of Sea Ice Friction Ben Lishman, Peter Sammonds, Daniel Feltham, and Alex Wilchinsky  

E-Print Network [OSTI]

for further work. 2. Experimental programme To produce a quantitative constitutive description of ice frictionPOAC09-66 The Rate- and State- Dependence of Sea Ice Friction Ben Lishman, Peter Sammonds, Daniel Feltham, and Alex Wilchinsky Rock and Ice Physics Laboratory, and Centre for Polar Observation

Feltham, Daniel

445

ARMO: Adaptive Road Map Optimization for Large Robot Teams Alexander Kleiner*, Dali Sun* and Daniel Meyer-Delius*  

E-Print Network [OSTI]

in static environments [4] that compute during a pre-processing phase a connectivity graph in freeARMO: Adaptive Road Map Optimization for Large Robot Teams Alexander Kleiner*, Dali Sun* and Daniel Meyer-Delius* Abstract-- Autonomous robot teams that simultaneously dis- patch transportation tasks

Nebel, Bernhard

446

New Demand for Old Food: the U.S. Demand for Olive Oil Bo Xiong, William Matthews, Daniel Sumner  

E-Print Network [OSTI]

New Demand for Old Food: the U.S. Demand for Olive Oil Bo Xiong, William Matthews, Daniel Sumner, demand for oils differentiated by origin and quality is price-elastic. These olive oils are highly of olive oil and the spread of Mediterranean diet contribute significantly to the rising demand

Schladow, S. Geoffrey

447

A New Market for an Old Food: the U.S. Demand for Olive Oil , Daniel Sumner  

E-Print Network [OSTI]

A New Market for an Old Food: the U.S. Demand for Olive Oil Bo Xiong , Daniel Sumner , William olive oil continues to be imported. Estimation of a demand system using monthly import data reveals that the income elasticity for virgin oils sourced from EU is above one, but demand for non-virgin oils is income

Schladow, S. Geoffrey

448

Vertex-Colored Graphs, Bicycle Spaces and Mahler Measure Kalyn R. Lamey Daniel S. Silver Susan G. Williams  

E-Print Network [OSTI]

Vertex-Colored Graphs, Bicycle Spaces and Mahler Measure Kalyn R. Lamey Daniel S. Silver Susan G to the bicycle space of the graph. For graphs G with a free Zd -action by automorphisms, C is a finitely identify the subspace C0 of based conservative vertex colorings with the bicycle space B of G. In section 3

Williams, Susan

449

Cross-entropy Analysis of the Information in Forensic Speaker Recognition Daniel Ramos and Joaquin Gonzalez-Rodriguez  

E-Print Network [OSTI]

Cross-entropy Analysis of the Information in Forensic Speaker Recognition Daniel Ramos and Joaquin analyze the average information supplied by a forensic speaker recognition system in an information of information, ac- cording to the needs of transparency and testability in forensic science. This analysis

Autonoma de Madrid, Universidad

450

DOE's Hydrogen and Fuel Cell Technologies Manufacturing Sub-Program...  

Broader source: Energy.gov (indexed) [DOE]

Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011. DOE's Hydrogen and Fuel Cell Technologies Manufacturing Sub-Program...

451

Estimating the expected latency to failure due to manufacturing defects  

E-Print Network [OSTI]

Manufacturers of digital circuits test their products to find defective parts so they are not sold to customers. Despite extensive testing, some of their products that are defective pass the testing process. To combat this problem, manufacturers...

Dorsey, David Michael

2004-09-30T23:59:59.000Z

452

New urban manufacturing neo-industrial design in Louisville, Kentucky  

E-Print Network [OSTI]

American manufacturing is experiencing a modest renaissance. U.S. firms are choosing to re-shore manufacturing jobs not out of their sense of patriotism, but because it makes good business sense. The costs of transportation ...

Rhie, Christopher

2014-01-01T23:59:59.000Z

453

Flexibility in Aerospace and Automotive Component Manufacturing Systems  

E-Print Network [OSTI]

Flexibility in Aerospace and Automotive Component Manufacturing Systems: Practice, Strategy Supervisor #12;2 #12;Flexibility in Aerospace and Automotive Component Manufacturing Systems: Practice Traditionally, parts fabrication in the aerospace and automotive industries has been associated with a number

de Weck, Olivier L.

454

Springfield Utility Board- Super Good Cents Manufactured Homes Rebate Program  

Broader source: Energy.gov [DOE]

The Springfield Utility Board offers a $600 incentive for the purchase of a Super Good Cents Manufactured Home. Super Good Cents Manufactured Homes offer improve comfort and efficiency. The...

455

EERE and Auto Manufacturers Demonstrate and Evaluate Fuel Cell...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

EERE and Auto Manufacturers Demonstrate and Evaluate Fuel Cell Vehicles EERE and Auto Manufacturers Demonstrate and Evaluate Fuel Cell Vehicles April 18, 2013 - 12:00am Addthis The...

456

Inbound freight consolidation for US manufacturers at China  

E-Print Network [OSTI]

In recent years, China has become the world factory for a sizable portion of products. Most manufacturing conglomerates in the United States now have contract manufacturing plants in China. Because many of these US companies ...

Fang, Yi, M. Eng. Massachusetts Institute of Technology

2006-01-01T23:59:59.000Z

457

Register Now for AMO's Workshop on Composite Manufacturing  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy's Advanced Manufacturing Office will host a workshop on Fiber Reinforced Polymer Composite Manufacturing on January 13, 2014 at the Hilton Crystal City in Arlington, VA.

458

2014-07-08 Issuance: ASRAC Manufactured Housing Working Group...  

Broader source: Energy.gov (indexed) [DOE]

7-08 Issuance: ASRAC Manufactured Housing Working Group; Notice of Membership 2014-07-08 Issuance: ASRAC Manufactured Housing Working Group; Notice of Membership This document is a...

459

An Energy Conservation Program at a Large Cable Manufacturing Plant  

E-Print Network [OSTI]

The Atlanta Works is the largest telephone cable manufacturing plant in the world plus the manufacturing center for fiber optic cable for the Western Electric Company and exemplifies how an effective energy conservation program can work...

Reale, P. J.

1983-01-01T23:59:59.000Z

460

Roadmap: Applied Engineering Manufacturing Systems Bachelor of Science  

E-Print Network [OSTI]

Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT 15000 Introduction to Human Communication 3 Fulfills Kent Core Additional Kent Core Requirement 3 See #12;Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT

Sheridan, Scott

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Event Registration Form International Good Manufacturing Practices Conference -#71683  

E-Print Network [OSTI]

Event Registration Form International Good Manufacturing Practices Conference - #71683 03 No Total $______ Please specify any additional dietary restrictions or allergies-884-1419 -- Credit Card Only Mail: International Good Manufacturing Practices Conference ­ #71683 The Georgia Center

Arnold, Jonathan

462

Center for Advanced Design & Manufacturing of Integrated Microfluidics (CADMIM)  

E-Print Network [OSTI]

Center for Advanced Design & Manufacturing of Integrated Microfluidics (CADMIM) Mission Statement: The Center for Advanced Design and Manufacturing of Integrated Microfluidics will develop design tools microfluidics targeting costeffective, quick, and easy diagnosis of the environment, agriculture, and human

Mease, Kenneth D.

463

DOE Requires Manufacturer and Labeler to Cease Sale of Incandescent...  

Broader source: Energy.gov (indexed) [DOE]

Manufacturer and Labeler to Cease Sale of Incandescent Reflector Lamps DOE Requires Manufacturer and Labeler to Cease Sale of Incandescent Reflector Lamps June 24, 2010 - 2:40pm...

464

Manufacturing buildings in Massachusetts : the legacy and the future  

E-Print Network [OSTI]

Manufacturing buildings are found in most towns and cities in Massachusetts. Standing in dominant isolation, or as part of an urban district, their presence is the built testimony to the role manufacturing played in so ...

Traynor, Callie

1983-01-01T23:59:59.000Z

465

Fiber Reinforced Polymer Composite Manufacturing Workshop “Save the Date”  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy’s Advanced Manufacturing Office plans to host a Fiber Reinforced Polymer Composite Manufacturing Workshop in the Washington D.C. area on Monday January 13, 2014.

466

Lessons Learned During the Manufacture of the NCSX Modular Coils  

SciTech Connect (OSTI)

The National Compact Stellarator Experiment's (NCSX) modular coils presented a number of engineering and manufacturing challenges due to their complex shapes, requirements for high dimensional accuracy and high current density requirements due to space constraints. Being the first of their kind, these coils required the implementation of many new manufacturing and measuring techniques and procedures. This was the first time that these manufacturing techniques and methods were applied in the production of coils at the laboratory. This resulted in a steep learning curve for the first several coils. Through the effective use of procedures, tooling modifications, involvement and ownership by the manufacturing workforce, and an emphasis on safety, the assembly team was able to reduce the manufacturing times and improve upon the manufacturing methods. This paper will discuss the learning curve and steps that were taken to improve the manufacturing efficiency and reduce the manufacturing times for the modular coils without forfeiting quality.

James H. Chrzanowski,Thomas G. Meighan, Steven Raftopoulos and Lawrence Dudek and Paul J. Fogarty

2009-09-15T23:59:59.000Z

467

Exploration of large scale manufacturing of polydimethylsiloxane (PDMS) microfluidic devices  

E-Print Network [OSTI]

Discussion of the current manufacturing process of polydimethylsiloxane (PDMS) parts and the emergence of PDMS use in biomedical microfluidic devices addresses the need to develop large scale manufacturing processes for ...

Hum, Philip W. (Philip Wing-Jung)

2006-01-01T23:59:59.000Z

468

Commercial assessment of roll to roll manufacturing of electronic displays  

E-Print Network [OSTI]

The cost of manufacturing electronic displays currently limits the range of applications and markets into which it is currently economically feasible to adopt displays. Roll-to-roll manufacturing has been identified by the ...

Randolph, Michael Aaron

2006-01-01T23:59:59.000Z

469

New Request for Information (RFI) on Clean Energy Manufacturing...  

Broader source: Energy.gov (indexed) [DOE]

(RFI) on Clean Energy Manufacturing Topic Areas New Request for Information (RFI) on Clean Energy Manufacturing Topic Areas September 3, 2014 - 10:07am Addthis Save the Date -...

470

Posted 5/10/12 Manufacturing /Process Engineer  

E-Print Network [OSTI]

. Plymouth Tube Company is committed to providing products and services that meet or exceed customers to improve safety, quality, and manufacturing efficiency throughout the manufacturing area. Utilization, reduce cycle times, improve productivity, create and find capacity, improve process reliability

Heller, Barbara

471

Wellbore manufacturing processes for in situ heat treatment processes  

DOE Patents [OSTI]

A method includes making coiled tubing at a coiled tubing manufacturing unit coupled to a coiled tubing transportation system. One or more coiled tubing reels are transported from the coiled tubing manufacturing unit to one or more moveable well drilling systems using the coiled tubing transportation system. The coiled tubing transportation system runs from the tubing manufacturing unit to one or more movable well drilling systems, and then back to the coiled tubing manufacturing unit.

Davidson, Ian Alexander; Geddes, Cameron James; Rudolf, Randall Lynn; Selby, Bruce Allen; MacDonald, Duncan Charles

2012-12-11T23:59:59.000Z

472

2007 Status of Manufacturing: Polymer Electrolyte Membrane (PEM) Fuel Cells  

SciTech Connect (OSTI)

In this document we assess the North American industry's current ability to manufacture polymer electrolyte membrane (PEM) fuel cells.

Wheeler, D.; Sverdrup, G.

2008-03-01T23:59:59.000Z

473

Manufacture of thermoelectric generator structures by fiber drawing  

DOE Patents [OSTI]

Methods of manufacturing a thermoelectric generator via fiber drawing and corresponding or associated thermoelectric generator devices are provided.

McIntyre, Timothy J; Simpson, John T; West, David L

2014-11-18T23:59:59.000Z

474

Manufacturing Energy and Carbon Footprint Definitions and Assumptions...  

Broader source: Energy.gov (indexed) [DOE]

Definitions and Assumptions, October 2012 Manufacturing Energy and Carbon Footprint Definitions and Assumptions, October 2012 footprintsassumptionsdefinitions2012.pdf More...

475

Design and Manufacture of Energy Absorbing Materials  

SciTech Connect (OSTI)

Learn about an ordered cellular material that has been designed and manufactured using direct ink writing (DIW), a 3-D printing technology being developed at LLNL. The new material is a patterned cellular material that can absorb mechanical energy-a cushion-while also providing protection against sheering. This material is expected to find utility in application spaces that currently use unordered foams, such as sporting and consumer goods as well as defense and aerospace.

Duoss, Eric

2014-05-28T23:59:59.000Z

476

Manufacturing development of low activation vanadium alloys  

SciTech Connect (OSTI)

General Atomics is developing manufacturing methods for vanadium alloys as part of a program to encourage the development of low activation alloys for fusion use. The culmination of the program is the fabrication and installation of a vanadium alloy structure in the DIII-D tokamak as part of the Radiative Divertor modification. Water-cooled vanadium alloy components will comprise a portion of the new upper divertor structure. The first step, procuring the material for this program has been completed. The largest heat of vanadium alloy made to date, 1200 kg of V-4Cr-4Ti, has been produced and is being converted into various product forms. Results of many tests on the material during the manufacturing process are reported. Research into potential fabrication methods has been and continues to be performed along with the assessment of manufacturing processes particularly in the area of joining. Joining of vanadium alloys has been identified as the most critical fabrication issue for their use in the Radiative Divertor Program. Joining processes under evaluation include resistance seam, electrodischarge (stud), friction and electron beam welding. Results of welding tests are reported. Metallography and mechanical tests are used to evaluate the weld samples. The need for a protective atmosphere during different welding processes is also being determined. General Atomics has also designed, manufactured, and will be testing a helium-cooled, high heat flux component to assess the use of helium cooled vanadium alloy components for advanced tokamak systems. The component is made from vanadium alloy tubing, machined to enhance the heat transfer characteristics, and joined to end flanges to allow connection to the helium supply. Results are reported.

Smith, J.P.; Johnson, W.R.; Baxi, C.B.

1996-10-01T23:59:59.000Z

477

Summary of decontamination cover manufacturing experience  

SciTech Connect (OSTI)

Decontamination cover forming cracks and vent cup assembly leaks through the decontamination covers were early manufacturing problems. The decontamination cover total manufacturing process yield was as low as 55%. Applicable tooling and procedures were examined. All manufacturing steps from foil fabrication to final assembly leak testing were considered as possible causes or contributing factors to these problems. The following principal changes were made to correct these problems: (1) the foil annealing temperature was reduced from 1375{degrees} to 1250{degrees}C, (2) the decontamination cover fabrication procedure (including visual inspection for surface imperfections and elimination of superfluous operations) was improved, (3) the postforming dye penetrant inspection procedure was revised for increased sensitivity, (4) a postforming (prewelding) 1250{degrees}C/1 h vacuum stress-relief operation was added, (5) a poststress relief (prewelding) decontamination cover piece-part leak test was implemented, (6) the hold-down fixture used during the decontamination cover-to-cup weld was modified, and concomitantly, and (7) the foil fabrication process was changed from the extruding and rolling of 63-mm-diam vacuum arc-remelted ingots (extrusion process) to the rolling of 19-mm-square arc-melted drop castings (drop cast process). Since these changes were incorporated, the decontamination cover total manufacturing process yield has been 91 %. Most importantly, more than 99% of the decontamination covers welded onto vent cup assemblies were acceptable. The drastic yield improvement is attributed primarily to the change in the foil annealing temperature from 1375{degrees} to 1250{degrees}C and secondarily to the improvements in the decontamination cover fabrication procedure.

Ulrich, G.B.; Berry, H.W.

1995-02-01T23:59:59.000Z

478

Design and Manufacture of Energy Absorbing Materials  

ScienceCinema (OSTI)

Learn about an ordered cellular material that has been designed and manufactured using direct ink writing (DIW), a 3-D printing technology being developed at LLNL. The new material is a patterned cellular material that can absorb mechanical energy-a cushion-while also providing protection against sheering. This material is expected to find utility in application spaces that currently use unordered foams, such as sporting and consumer goods as well as defense and aerospace.

Duoss, Eric

2014-05-30T23:59:59.000Z

479

Teksun PV Manufacturing Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop, Inc Place:Innovation & Solutions HomeTeksun PV Manufacturing

480

Advanced Manufacturing Office | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTankless orA BRIEF HISTORY OFEnergyAdvanced Manufacturing Office

Note: This page contains sample records for the topic "manufacturers archer daniels" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Manufacturing Success Stories | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't HappenLow-CostManufacturing Research and

482

A Markovian analysis of semiconductor manufacturing processes  

E-Print Network [OSTI]

) Karan L. Watson (Member) Martin A. Wortman (Member) ep Sastri (Member) o W. Howze (Head of Department) December 1991 ABSTRACT A Markovian Analysis of Semiconductor Manufacturing Processes. (December 1991) Kent Eugene Schultz, B. S. , Iowa... grateful to Dr. Martin Wortman, for his pa- tience and endless stream of examples to help me understand stochastic processes. I would also like to thank Dr. Tep Sastri for his patience and for always having a refer- ence available when I needed it...

Schultz, Kent Eugene

2012-06-07T23:59:59.000Z

483

Manufacturing Demonstration Facilities Workshop Agenda, March 2012  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department of Energy Low-TemperatureEnergy Maine09Manufacturing Demonstration

484

Manufacturing Demonstration Facilities Workshop Agenda, March 2012 |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department of Energy Low-TemperatureEnergy Maine09Manufacturing

485

Manufacturing Innovation Topics Workshop: Engineered Nanomaterials  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department of Energy Low-TemperatureEnergyAll ManufacturingFoodOctoberto DOE

486

Manufacturing Success Stories | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: AlternativeEnvironment, SafetyWater ConservationDepartmentEnergy Manufacturing

487

Manufacturing means jobs „ Mike Arms  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and InterfacesAdministrationManufacturing

488

Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach  

E-Print Network [OSTI]

the environment and green manufacturing was so commonly ofmap directly onto green manufacturing practice. For example,48] Dornfeld D (2012) Green Manufacturing: Fundamentals and

2012-01-01T23:59:59.000Z

489

Assessment of Lean and Green Strategies by Simulation of Manufacturing Systems in Discrete Production Environments  

E-Print Network [OSTI]

of implementing lean and green manufacturing strategies on5,6]. Research in green manufacturing spans a variety ofof lean and/or green strategies in manufacturing systems.

Diaz-Elsayed, Nancy; Jondral, Annabel; Greinacher, Sebastian; Dornfeld, David; Lanza, Gisela

2013-01-01T23:59:59.000Z

490

The role of lean manufacturing principles and strategic alternatives in achieving business goals  

E-Print Network [OSTI]

Lean Manufacturing is widely accepted as a proven method to achieve operational excellence. Many manufacturers undertake lean manufacturing implementations as a strategy to improve competitiveness and realize business ...

Ramaswamy, Dhananjay

2006-01-01T23:59:59.000Z

491

Comparing Environmental Impacts of Additive Manufacturing vs. Traditional Machining via Life-Cycle Assessment  

E-Print Network [OSTI]

Social Impacts of Additive Manufacturing vs CNC MachiningImpacts of Additive Manufacturing vs. Traditional Machiningcutting! Impacts of Additive Manufacturing in Literature

Faludi, Jeremy; Bayley, Cindy; Bhogal, Suraj; Iribarne, Myles

2014-01-01T23:59:59.000Z

492

A Unified Approach for Integrated Computer-Aided Design and Manufacturing  

E-Print Network [OSTI]

different types of additive manufacturing technologies, suchbe used to model the additive manufacturing process as well.composite manufacturing and 3D printing, are additive. They

Huang, Bin

2013-01-01T23:59:59.000Z

493

Low Cost Carbon Fiber Production Carbon Fiber Manufacturing Cost Modeling  

E-Print Network [OSTI]

to bond with composite matrix material. It is important that a carbon fiber manufacturing cost model manufactured with carbon fiber as opposed to traditional materials such as steel, automotive parts are able associated with both the manufacture of carbon fibers themselves as well as their composites. Traditional

494

Copyright 2009 200916 Sustainable Design and Manufacturing of Precast Infrastructure  

E-Print Network [OSTI]

­ Sustainable Design and Manufacturing of Precast Infrastructure CIFE TAC 2009 Research Tasks · Green ECC 200916 ­ Sustainable Design and Manufacturing of Precast Infrastructure CIFE TAC 2009 Green ECC MaterialsCopyright © 2009 200916 ­ Sustainable Design and Manufacturing of Precast Infrastructure CIFE TAC

Lepech, Michael D.

495

Mechanical Engineering Manufacturing Solid Oxide Fuel Cells for Improved Electro-  

E-Print Network [OSTI]

and storage and green manufacturing. Professor of Mechanical Engineering and Material Science BostonUday Pal Mechanical Engineering Manufacturing Solid Oxide Fuel Cells for Improved Electro- chemical for the commercialization of solid oxide fuel cells (SOFCs) are its high manufacturing and material costs expressed in terms

Lin, Xi

496

MANUFACTURABILITY ANALYSIS TO COMBINE ADDITIVE AND SUBTRACTIVE PROCESSES  

E-Print Network [OSTI]

MANUFACTURABILITY ANALYSIS TO COMBINE ADDITIVE AND SUBTRACTIVE PROCESSES Authors: Olivier Kerbrat of the tool may advantageously be machined or manufactured by an additive process. Originality/value: Nowadays is proposed to combine additive and subtractive processes, for tooling design and manufacturing

Paris-Sud XI, Université de

497

Journal of Mechanisms and Robotics Hybrid Deposition Manufacturing: Design  

E-Print Network [OSTI]

combines additive manufacturing (AM) processes such as FDM with material deposition and embedded components applications. Additive manufacturing techniques are used to print both permanent components and sacrificial, leveraging the benefits of additive manufacturing and expanding the range of design options for robotic

Dollar, Aaron M.

498

Advanced Manufacturing Use Cases and Early Results in GENI Infrastructure  

E-Print Network [OSTI]

for controlling remote processes in manufacturing facilities. In addition, there is a need to suitably configureAdvanced Manufacturing Use Cases and Early Results in GENI Infrastructure Alex Berryman, Prasad to advanced manufacturing communities are exciting prospects due to the growth of the global marketplace

Calyam, Prasad

499

Nano-Manufacturing While nanotechnology promises to revolutionize everything from  

E-Print Network [OSTI]

Nano-Manufacturing While nanotechnology promises to revolutionize everything from energy production futuristic systems will remain science fiction without practical and scalable nano-manufacturing capabilities. Researchers at the University of Maryland's NanoCenter have the manufacturing capabilities needed for turning

Hill, Wendell T.

500

Two-dimensional x-ray correlation spectroscopy of remote core states Daniel Healion, Yu Zhang, Jason D. Biggs, Weijie Hua, and Shaul Mukamel  

E-Print Network [OSTI]

, Jason D. Biggs, Weijie Hua, and Shaul Mukamel Citation: Structural Dynamics 1, 014101 (2014); doi: 10-ray correlation spectroscopy of remote core states Daniel Healion, Yu Zhang, Jason D. Biggs, Weijie Hua, and Shaul

Mukamel, Shaul