National Library of Energy BETA

Sample records for manual defrost upright

  1. Defrost Temperature Termination in Supermarket Refrigeration Systems

    SciTech Connect (OSTI)

    Fricke, Brian A; Sharma, Vishaldeep

    2011-11-01

    The objective of this project was to determine the potential energy savings associated with implementing demand defrost strategies to defrost supermarket refrigerated display case evaporators, as compared to the widely accepted current practice of controlling display case defrost cycles with a preset timer. The defrost heater energy use of several representative display case types was evaluated. In addition, demand defrost strategies for refrigerated display cases as well as those used in residential refrigerator/freezers were evaluated. Furthermore, it is anticipated that future work will include identifying a preferred defrost strategy, with input from Retail Energy Alliance members. Based on this strategy, a demand defrost system will be designed which is suitable for supermarket refrigerated display cases. Limited field testing of the preferred defrost strategy will be performed in a supermarket environment.

  2. Apparatus and method for evaporator defrosting

    DOE Patents [OSTI]

    Mei, Viung C. (Oak Ridge, TN); Chen, Fang C. (Knoxville, TN); Domitrovic, Ronald E. (Knoxville, TN)

    2001-01-01

    An apparatus and method for warm-liquid defrosting of the evaporator of a refrigeration system. The apparatus includes a first refrigerant expansion device that selectively expands refrigerant for cooling the evaporator, a second refrigerant expansion device that selectively expands the refrigerant after the refrigerant has passed through the evaporator, and a defrosting control for the first refrigerant expansion device and second refrigerant expansion device to selectively defrost the evaporator by causing warm refrigerant to flow through the evaporator. The apparatus is alternately embodied with a first refrigerant bypass and/or a second refrigerant bypass for selectively directing refrigerant to respectively bypass the first refrigerant expansion device and the second refrigerant expansion device, and with the defrosting control connected to the first refrigerant bypass and/or the second refrigerant bypass to selectively activate and deactivate the bypasses depending upon the current cycle of the refrigeration system. The apparatus alternately includes an accumulator for accumulating liquid and/or gaseous refrigerant that is then pumped either to a refrigerant receiver or the first refrigerant expansion device for enhanced evaporator defrosting capability. The inventive method of defrosting an evaporator in a refrigeration system includes the steps of compressing refrigerant in a compressor and cooling the refrigerant in the condenser such that the refrigerant is substantially in liquid form, passing the refrigerant substantially in liquid form through the evaporator, and expanding the refrigerant with a refrigerant expansion device after the refrigerant substantially passes through the evaporator.

  3. Heat pump having improved defrost system

    DOE Patents [OSTI]

    Chen, Fang C. (Knoxville, TN); Mei, Viung C. (Oak Ridge, TN); Murphy, Richard W. (Knoxville, TN)

    1998-01-01

    A heat pump system includes, in an operable relationship for transferring heat between an exterior atmosphere and an interior atmosphere via a fluid refrigerant: a compressor; an interior heat exchanger; an exterior heat exchanger; an accumulator; and means for heating the accumulator in order to defrost the exterior heat exchanger.

  4. Heat pump having improved defrost system

    DOE Patents [OSTI]

    Chen, F.C.; Mei, V.C.; Murphy, R.W.

    1998-12-08

    A heat pump system includes, in an operable relationship for transferring heat between an exterior atmosphere and an interior atmosphere via a fluid refrigerant: a compressor; an interior heat exchanger; an exterior heat exchanger; an accumulator; and means for heating the accumulator in order to defrost the exterior heat exchanger. 2 figs.

  5. The effect of alternate defrost strategies on the reverse-cycle defrost of an air-source heat pump 

    E-Print Network [OSTI]

    Schliesing, John Steven

    1988-01-01

    frost during the last three minutes of the defrost improved overall cyclic performance. Strategies svhich involved stopping of the indoor fan during defrost or delaying the start of the outdoor fan following detrost termination had a negative impact... (ASHRAE) I' or its financial support of my research. TABLE OF CONTENTS CHAPTER Page I INTRODUCTION II LITERATURE REVIEW A. . Cyclic Studies without Frosting B. Cyclic Frosting and Defrosting Studies C. Modeling and Simulation D. Detailed EVork E...

  6. The effects of airflow modulation and multi-stage defrost on the performance of an air source heat pump 

    E-Print Network [OSTI]

    Payne, William Vance

    1992-01-01

    Modeling System Performance Cycling Losses Frosting and Defrosting Losses . Heat Pump Defrost Controls. Effects of Frost on Airflow Summary of Literature Reviewed . 7 12 16 26 34 41 TEST FACILITY. Psychrometric Rooms Test Heat Pump . . Indoor... Test Section. . Outdoor Test Section. Data Acquisition and Reduction. Experimental Procedure. 44 46 49 51 52 53 IV BASE CASE TEST RESULTS . System Performance Parameters. Frosting Period . Defrost Initiation. Melt Period . . Drain Period...

  7. Determination of the Transient Response Characteristics of the Air-Source Heat Pump During the Reverse Cycle Defrost 

    E-Print Network [OSTI]

    O'Neal, D. L.; Anand, N. K.; Peterson, K. T.; Schleising, S.

    1988-01-01

    The objectives of this research were to: (1) characterize the reverse cycle defrost of the air-to-air heat pump and (2) examine the effect of different expansion devices on the performance of the heat pump during the defrost cycle....

  8. Upright cone beam CT imaging using the onboard imager

    SciTech Connect (OSTI)

    Fave, Xenia Martin, Rachael; Yang, Jinzhong; Balter, Peter; Court, Laurence; Carvalho, Luis; Pan, Tinsu

    2014-06-15

    Purpose: Many patients could benefit from being treated in an upright position. The objectives of this study were to determine whether cone beam computed tomography (CBCT) could be used to acquire upright images for treatment planning and to demonstrate whether reconstruction of upright images maintained accurate geometry and Hounsfield units (HUs). Methods: A TrueBeam linac was programmed in developer mode to take upright CBCT images. The gantry head was positioned at 0°, and the couch was rotated to 270°. The x-ray source and detector arms were extended to their lateral positions. The x-ray source and gantry remained stationary as fluoroscopic projections were taken and the couch was rotated from 270° to 90°. The x-ray tube current was normalized to deposit the same dose (measured using a calibrated Farmer ion chamber) as that received during a clinical helical CT scan to the center of a cylindrical, polyethylene phantom. To extend the field of view, two couch rotation scans were taken with the detector offset 15 cm superiorly and then 15 cm inferiorly. The images from these two scans were stitched together before reconstruction. Upright reconstructions were compared to reconstructions from simulation CT scans of the same phantoms. Two methods were investigated for correcting the HUs, including direct calibration and mapping the values from a simulation CT. Results: Overall geometry, spatial linearity, and high contrast resolution were maintained in upright reconstructions. Some artifacts were created and HU accuracy was compromised; however, these limitations could be removed by mapping the HUs from a simulation CT to the upright reconstruction for treatment planning. Conclusions: The feasibility of using the TrueBeam linac to take upright CBCT images was demonstrated. This technique is straightforward to implement and could be of enormous benefit to patients with thoracic tumors or those who find a supine position difficult to endure.

  9. FIELD TEST OF A HIGH-EFFICIENCY, AUTOMATIC-DEFROST REFRIGERATOR-FREEZER

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    #12;FIELD TEST OF A HIGH-EFFICIENCY, AUTOMATIC- DEFROST REFRIGERATOR-FREEZER By Richard F. Topping and manufacture pre-production units for home usage tests. The purpose of the field test and the associated market been promising. The first five months of field test data have shown an average 57% decrease in energy

  10. The effects of expansion devices on the transient response characteristics of the air-source heat pump during the reverse cycle defrost 

    E-Print Network [OSTI]

    Peterson, Kurt T.

    1988-01-01

    and office. Without her support, this would not have been possible. TABLE OF CONTENTS CHAPTER Page INTRODUCTION LITERATURE REVIEW PERFORMANCE MEASUREMENT TRANSIENT PERFORMANCE CYCLING LOSSES FROSTING LOSSES DEFROSTING LOSSES SUMMARY OF LITERATURE... TEST FROSTING OF THE OUTDOOR COIL DEFROST INITIATION MELTING FROST DRAINING MELTED FROST DEFROST TERMINATION AND RECOVERY SUMMARY OF BASE CASE 46 48 50 50 53 61 70 71 77 79 CHAPTER COMPARISON OF TXVs WITH DIFFERENT RESPONSE TIMES...

  11. Upright Vacuum Sweeps Up the Competition in #EnergyFaceoff Round...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Upright Vacuum Sweeps Up the Competition in EnergyFaceoff Round Two Upright Vacuum Sweeps Up the Competition in EnergyFaceoff Round Two November 12, 2014 - 10:17am Addthis The...

  12. Hair Dryer vs. Upright Vacuum: Round Two of #EnergyFaceoff Begins...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hair Dryer vs. Upright Vacuum: Round Two of EnergyFaceoff Begins Hair Dryer vs. Upright Vacuum: Round Two of EnergyFaceoff Begins November 10, 2014 - 9:35am Q&A Which appliance...

  13. Measured impacts of supermarket humidity level on defrost performance and refrigerating system energy use

    SciTech Connect (OSTI)

    Henderson, H.I.; Khattar, M.

    1999-07-01

    This paper presents field-monitor data from two supermarkets where the impact of space humidity on refrigerating system energy use was evaluated. Direct digital control (DDC) systems were used at both stores to collect 15-minute monitored data. At Store A in Minneapolis, the DDC system was used to monitor system performance as well as to implement temperature-terminated control in place of time-terminated control on 16 refrigerated zones using hot gas defrost. At Store B in Indianapolis, the DDC system was used to quantify the performance trends for the single compressor rack system with electric defrost. The results at Store B showed that refrigerating system energy use decreases by nearly 10 kWh/day for each 1% drop in space relative humidity, or about 0.4% of average annual system energy use. This value includes the impact of reduced latent loads, the reduction in direct energy use and imposed load from reduced electric defrost heater operation, and the smaller imposed load from reduced anti-sweat heater energy use. The measured reductions agree well with the impact predicted using the calculation methods developed by Howell (1933b) in ASHRAE Research Project 596. At Store A, the measured data show that implementing temperature-terminated defrost reduced refrigerating system energy use by nearly 70 kWh/day over the winter period when the average space humidity was 22% RH. The savings from temperature-terminated defrost increase by 4 kWh/day per each 1% drop in relative humidity. At both stores, the same type of mechanical controls were used to duty cycle the anti-sweat heaters based on store dew point. Anti-sweat heater electricity use was observed to decrease by 4.6 kWh/day at Store B and 3.4 kWh/day at Store A for each 1% drop in relative humidity. At Store A, a more aggressive control scheme was implemented with the DDC system that reduced anti-sweat heater energy use by 7.8 kWh/day per % RH. The more aggressive control approach was reported to properly control fogging and condensation on display case surfaces. The overall energy reduction factor at the two stores was 12 kWh/day per % RH at Store A and 15 kWh/day per % RH at Store B. With more aggressive anti-sweat heater control, reduction factors as high as 20 kWh/day per % RH appear to be possible.

  14. A Biomechanically Motivated Two-Phase Strategy for Biped Upright Balance Control

    E-Print Network [OSTI]

    A Biomechanically Motivated Two-Phase Strategy for Biped Upright Balance Control Muhammad Abdallah and is robust to local ground surface feature. Biomechanics literature indicates a similar strategy in play maintenance during gait. We take our cue from biomechanics research [10] which points out the very different

  15. A Hovering Flapping-Wing Microrobot with Altitude Control and Passive Upright Stability

    E-Print Network [OSTI]

    Wood, Robert

    A Hovering Flapping-Wing Microrobot with Altitude Control and Passive Upright Stability Z. E. Teoh forces [2]. Despite these challenges, various groups have reported success in building small scale aerial that enabled liftoff was an underactuated, passive mechanism that regulated the angle of attack of the wings [7

  16. Biosafety Manual

    SciTech Connect (OSTI)

    King, Bruce W.

    2010-05-18

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

  17. Fermilab at Work | Manuals and Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policy Guide Engineering Manual Engineering Manual Engineering Manual Appendices Risk Assessment Spreadsheet Engineering Manual Rollout Teamcenter Rollout Facilities Request Form...

  18. EM-PDRI Manual

    Office of Environmental Management (EM)

    ENVIRONMENTAL MANAGEMENT PROJECT DEFINITION RATING INDEX (EM*PDRI) MANUAL OFFICE OF PROJECT MANAGEMENT, EM-6 U.S. DEPARTMENT OF ENERGY FEBRUARY 2001 REVISION 1 EM*PDRI MANUAL...

  19. Nuclear Explosive Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-04-14

    This Manual provides supplemental details to support the requirements of DOE O 452.2D, Nuclear Explosive Safety.

  20. Directives System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-01-30

    This Manual provides detailed requirements to supplement DOE O 251.1A, Directives System, dated 1-30-98.

  1. EMSL Operations Manual

    SciTech Connect (OSTI)

    Foster, Nancy S.

    2009-06-18

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  2. EMSL Operations Manual

    SciTech Connect (OSTI)

    Foster, Nancy S.

    2009-03-25

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  3. Directives System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-10-16

    This Manual provides detailed requirements to supplement DOE O 251.1, which establishes requirements for the development, coordination, and sunset review of DOE directives.

  4. Radiological Control Manual

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  5. DOE Explosives Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-03-29

    This Manual describes DOE's explosives safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives.

  6. Mail Services User's Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-07-12

    This Manual provides detailed information on using the Department of Energy (DOE) mail services. Canceled by DOE G 573.1-1.

  7. EMS Programs Manual

    Broader source: Energy.gov [DOE]

    The Environmental Management System Programs Manual (LMS/POL/S04388-3.0) is obsolete and has been removed from the LM website.

  8. Rensselaer Academic Advising Manual

    E-Print Network [OSTI]

    Bystroff, Chris

    of majors Impact of changing one's major Institute Requirements 7. Student-specific Information Sources/15/15 Rensselaer Academic Advising Manual V. 1.0 This manual combines information specific to Rensselaer occasionally be copied. Page breaks have been adjusted to keep tables and related information together. Pages

  9. Personnel Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-05-22

    This Manual provides detailed requirements and procedures to supplement DOE O 472.1B, Personnel Security Activities, which establishes the overall objectives, requirements, and responsibilities for implementation and operation of the Personnel Security Program and the Personnel Security Assurance Program in the Department of Energy (DOE). This Manual addresses only the Personnel Security Program.

  10. Federal Employee Training Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-09-21

    This Manual provides detailed requirements to supplement DOE O 360.1A, Federal Employee Training, dated 9-21-99. The information in this Manual is intended to assist in improving Federal workforce performance under Department of Energy (DOE) managed Federal employee training. Canceled by DOE M 360.1-1B.

  11. Federal Employee Training Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-10-11

    This Manual provides detailed requirements to supplement DOE O 360.1B, FEDERAL EMPLOYEE TRAINING. The information in this Manual is intended to assist in improving Federal workforce performance under Department of Energy (DOE) managed Federal employee training. Cancels DOE M 360.1A-1. Canceled by DOE O 360.1C.

  12. Fire Protection Program Manual

    SciTech Connect (OSTI)

    Sharry, J A

    2012-05-18

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  13. User' Software Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MM-Group Home MMG Advisory Committees 4-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info FAQs 4-ID-D Beamline Software Manual Introduction...

  14. Nuclear Material Packaging Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-03-07

    The manual provides detailed packaging requirements for protecting workers from exposure to nuclear materials stored outside of an approved engineered contamination barrier. Does not cancel/supersede other directives. Certified 11-18-10.

  15. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Does not cancel other directives.

  16. Budget Execution Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-30

    The manual provides the user with a single source for references, definitions, and detailed procedures for distributing and controlling Department funds.Canceled by DOE M 135.1-1A. Does not cancel other directives.

  17. Nuclear material operations manual

    SciTech Connect (OSTI)

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.

  18. Salinas : theory manual.

    SciTech Connect (OSTI)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2011-11-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas, we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  19. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. The purpose of the Manual is to catalog those procedural requirements and existing practices that ensure that all DOE elements and contractors continue to manage DOE's radioactive waste in a manner that is protective of worker and public health and safety, and the environment. Does not cancel other directives.

  20. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12

    The Manual establishes the minimum implementation standards for cyber security management processes throughout the Department. No cancellation.

  1. Quick Manual LMS communication setup

    E-Print Network [OSTI]

    Quick Manual LMS communication setup - 1 - © SICK AG · Auto Ident · Germany · All rights reserved Quick Manual for LMS communication setup Hardware setup and measurement mode configuration Version 1.0 June 2001 (HW/MV) #12;Quick Manual LMS communication setup - 2 - © SICK AG · Auto Ident · Germany · All

  2. SERVICE MANUAL AUTORANGING

    E-Print Network [OSTI]

    Kleinfeld, David

    SERVICE MANUAL AUTORANGING DC POWER SUPPLY AGILENT MODELS 6010A, 6011A, 6012B and 6015A Agilent pay for return of products to Customer. Warranty services outside the country of initial purchase, the Customer shall be entitled to a refund of the purchase price upon return of the product to Agilent

  3. Blackboard Vista Manual

    E-Print Network [OSTI]

    WebCT

    2007-07-18

    It is always present and it contains links to Help and Log Out. ... There is both automatic and manual browser checking. The automatic browser check .... To delete a mail message, from its ActionLink menu, select Delete. ActionLink Menu.

  4. Engineering Honors Thesis Manual

    E-Print Network [OSTI]

    Lightsey, Glenn

    1 Engineering Honors Thesis Manual Engineering Honors Program The University of Texas.200 * No thesis should cause pain and anguish. You should never be depressed over your thesis. If you are feeling in supervisors/second readers THESIS SYMPOSIUM 10 STANDARDS 11 GRADES, ORAL EXAMS, AND THESIS SUBMISSION 13

  5. DOE Explosives Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-01-09

    The Manual describes the Departments explosive safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives. Cancels DOE M 440.1-1. Canceled by DOE O 440.1B Chg 1.

  6. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B

  7. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Admin Chg 1 dated 9-1-09. Canceled by DOE O 205.1B.

  8. Information Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-16

    This Manual establishes security requirements for the protection and control of matter required to be classified or controlled by statutes, regulations, or U.S. Department of Energy directives. Cancels DOE M 470.4-4 Chg 1. DOE M 470.4-4A Chg 1 issued 10-12-10.

  9. Information Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-10-12

    The Manual establishes security requirements for the protection and control of matter required to be classified or controlled by statutes, regulations, or U.S. Department of Energy (DOE) directives. Original dated dated 1-16-09. Canceled by DOE O 471.6--except for Section D.

  10. PHYSICAL GEOLOGY LABORATORY MANUAL

    E-Print Network [OSTI]

    Merguerian, Charles

    PHYSICAL GEOLOGY LABORATORY MANUAL Geology 001 Eleventh Edition by Professors Charles Merguerian and J Bret Bennington Department of Geology Hofstra University © 2010 #12;ii Table of Contents Lab and Find Out More about Geology at Hofstra Email: Geology professors can be contacted via Email: Full

  11. Nuclear Explosive Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-04-14

    This Department of Energy (DOE) Manual provides supplemental details on selected topics to support the requirements of DOE O 452.2D, Nuclear Explosive Safety, dated 4/14/09. Cancels DOE M 452.2-1. Admin Chg 1, dated 7-10-13, cancels DOE M 452.2-1A.

  12. INSTRUCTION MANUAL FIRST EDITION

    E-Print Network [OSTI]

    Feeny, Brian

    2013 ROPE PUMP INSTRUCTION MANUAL FIRST EDITION M S U R O P E P U M P T E A M 2 0 1 3 #12;- 1 - 2013 CONTENTS HOW IT WORKS Page 2 PUMP SPECIFICATIONS Page 6 BUILD INSTRUCTIONS FOR ROPE PUMP ASSEMBLY Page 21 BUILD INSTRUCTIONS FOR ROPE & SEALS ASSEMBLY Page 27 MAINTENANCE Page 12, 20, 33

  13. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-05

    The Federal Technical Capability Manual provides the process for the recruitment, deployment, development, and retention of Federal personnel with the demonstrated technical capability to safely accomplish the Departments missions and responsibilities at defense nuclear facilities. Canceled by DOE M 426.1-1A. Does not cancel other directives.

  14. SAFETY MANUAL ENVIRONMENTAL

    E-Print Network [OSTI]

    Firestone, Jeremy

    of the Delaware Hazardous Chemical Information Act ................. 1 2.0 Purpose of the OSHA Laboratory Standard in this manual can be found on the Web under http://www.udel.edu/ExecVP/polprod #12;i Contents 1.0 Purpose ........................................................................ 5 6.0 Hazardous Chemicals (Definition

  15. National Security System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-03-08

    The manual provides baseline requirements and controls for the graded protection of the confidentiality, integrity, and availability of classified information and information systems used or operated by the Department of Energy (DOE), contractors, and any other organization on behalf of DOE, including the National Nuclear Security Administration. Cancels DOE M 471.2-2. Canceled by DOE O 205.1B.

  16. Bioengineering Internship Manual

    E-Print Network [OSTI]

    Collins, Gary S.

    Bioengineering Internship Manual Washington State University Bioengineering Internship Program Voiland School of Chemical Engineering and Bioengineering Dana Hall 118 Pullman, WA 99164-2710 509 positions. BE 495: Internship in Bioengineering. Variable credit (1-3 hrs.) May be repeated for credit

  17. DOE Manual 442.1-1 Differing Professional Opinions Manual for...

    Office of Environmental Management (EM)

    Professional Opinions Manual for Technical Issues Involving Environment, Safety, and Health DOE Manual 442.1-1 Differing Professional Opinions Manual for Technical Issues...

  18. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. Change 1 dated 6/19/01 removes the requirement that Headquarters is to be notified and the Office of Environment, Safety and Health consulted for exemptions for use of non-DOE treatment facilities. Certified 1-9-07.

  19. Personnel Security Program Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-07-12

    This Manual provides detailed requirements and procedures to supplement DOE O 472.1B, Personnel Security Activities, which establishes the overall objectives, requirements, and responsibilities for implementation and operation of the Personnel Security Program and the Personnel Security Assurance Program in the Department of Energy (DOE), including the National Nuclear Security Administration (NNSA). Extended until 7-7-06 by DOE N 251.64, dated 7-7-05 Cancels: DOE M 472.1-1A.

  20. IIIPRISMA System Operator's Manual PRISMA Therapy Options ............................................................................. 2

    E-Print Network [OSTI]

    Kay, Mark A.

    IIIPRISMA System Operator's Manual ... PRISMA Therapy Options .................................................................................................... PRISMA System ............................... xvi Operator's Manual ......................................................... #12;PRISMA System Operator's Manual ia Controller CCA

  1. Radiological control manual. Revision 1

    SciTech Connect (OSTI)

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

  2. University of South Carolina BIOSAFETY MANUAL

    E-Print Network [OSTI]

    Morgan, Stephen L.

    University of South Carolina BIOSAFETY MANUAL USC Biosafety Manual December 14, 2006 EHS-M-014 of South Carolina. These policies and procedures apply to work involving insertion of recombinant DNA of this Manual was modified from University of East Carolina's Biosafety Manual. USC Biosafety Manual December 14

  3. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12

    The Manual establishes the minimum implementation standards for cyber security management processes throughout the Department. No cancellation. Admin Chg 1 dated 9-1-09.

  4. Occupational Health and Safety Manual

    E-Print Network [OSTI]

    Occupational Health and Safety Manual #12;1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 York University Occupational Health and Safety Policy and Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Occupational Health and Safety Legislation

  5. CHRPR Operations Manual

    SciTech Connect (OSTI)

    Windsor, Bradford T.; Woodring, Mitchell L.; Myjak, Mitchell J.

    2012-08-21

    1.0 Overview The TSA systems VM-250AGN portal monitor is a set of two pillars made to detect nuclear material in a vehicle. Each pillar contains two polyvinyl toluene (PVT) plastic gamma ray detectors and four 3He neutron detectors, as well as a power supply and electronics to process the output from these detectors. Pacific Northwest National Laboratory has designed and built a continuous high-resolution PVT readout (CHRPR) for the TSA portal to allow spectral readout from the gamma and neutron detectors. The CHRPR helps differentiate between different types of radioactive material through increased spectroscopic capability and associated developments. The TSA VM-250AGN continually monitors the natural neutron and gamma ray background which occurs around the pillars. When the system is installed, the two pillars are placed on either side of a roadway, and a vehicle presence sensor records the passage of cars between them. When radiation measurements exceed a preset alarm threshold, the system alarms to let the user know that a radioactive material is present. Time-stamped measurements are continually sent to a computer, where they can be recorded via a Windows terminal or the TSA RAVEN software. For each pillar in the original TSA model, output from each detector is amplified and shaped by a single channel analyzer, the SCA-775. Information from both SCA-775’s are passed to the SC-770 in the master pillar. This is the detector interface module and main data processor. It counts electrical pulses and uses program software to output total readings to the computer, as well as trigger any appropriate alarms. The CHRPR allows a parallel approach to recording radiation readings from the TSA system. After installing the CHRPR system, all TSA power and signal connections are unchanged. The CHRPR captures electrical pulses containing detector and occupancy sensor information from the SCA-775 on either side. These pulses are converted to a signal with a time width proportional to the amplitude, via voltage to pulse width converters (VPW). These time widths are then digitized by a field programmable gate array (FPGA) and transmitted over Ethernet to a data acquisition computer. The CHRPR records the magnitude of each pulse to a continuous event mode file on or each detector and occupancy sensor This manual begins with CHRPR installation instructions, then a section on CHRPR software. Afterward is a brief overview of how the TSA system works, then an explanation of the CHRPR. This manual is meant as a supplement to the TSA VM-250AGN manual, which can be found at http://tsasystems.com/library/manuals/pm700agn-vm250agn_manual.pdf . That manual is the manufacturer’s guide for the installation, programming, and maintenance of the portal system.

  6. TALENT user's manual.

    SciTech Connect (OSTI)

    Merchant, Bion John

    2012-01-01

    The Ground-Based Monitoring R and E Component Evaluation project performs testing on the hardware components that make up Seismic and Infrasound monitoring systems. The majority of the testing is focused on the Digital Waveform Recorder (DWR), Seismic Sensor, and Infrasound Sensor. The software tool used to capture and analyze the data collected from testing is called TALENT: Test and Analysis Evaluation Tool. This document is the manual for using TALENT. Other reports document the testing procedures that are in place (Kromer, 2007) and the algorithms employed in the test analysis (Merchant, 2011).

  7. RADTRAN 6 technical manual.

    SciTech Connect (OSTI)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  8. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. Change 1 dated 6/19/01 removes the requirement that Headquarters is to be notified and the Office of Environment, Safety and Health consulted for exemptions for use of non-DOE treatment facilities. Certified 1-9-07. Admin Chg 2, dated 6-8-11, supersedes DOE M 435.1-1 Chg 1.

  9. TEC Working Group Topic Groups Manual Review

    Broader source: Energy.gov [DOE]

    This group is responsible for the update of DOE Manual 460.2-1, Radioactive Material Transportation Practices Manual.  This manual was issued on September 23, 2002, and establishes a set of...

  10. Automated manual transmission controller

    DOE Patents [OSTI]

    Lawrie, Robert E. (Whitmore Lake, MI); Reed, Jr., Richard G. (Royal Oak, MI); Bernier, David R. (Rochester Hills, MI)

    1999-12-28

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  11. MELCOR computer code manuals

    SciTech Connect (OSTI)

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A.; Hyman, C.R.; Sanders, R.L. [Oak Ridge National Lab., TN (United States)

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.

  12. ENERGY MANAGEMENT OPERATIONAL PROCEDURE MANUAL

    E-Print Network [OSTI]

    Harman, Neal.A.

    ENERGY MANAGEMENT OPERATIONAL PROCEDURE MANUAL Swansea University Estates Services Singleton Park Swansea SA2 8PP Tel 01792 295819 Fax 01792 295820 #12;Swansea University Energy Management Operational Procedural Manual Estates Services April 2008 rev 1 Created on 4/15/2008 4:23:00 PM - 2 - Contents 1. Energy

  13. Laboratory Biosafety Manual 1. Introduction

    E-Print Network [OSTI]

    Natelson, Douglas

    Laboratory Biosafety Manual 1. Introduction This Manual is intended to be a resource in the laboratory environment to work safely and reduce or eliminate the potential for exposure to biological and Biomedical Laboratories (U.S. Health and Human Services Publication No. CDC99-8395, Public Health Service

  14. RCRA orientation manual, 1990 edition

    SciTech Connect (OSTI)

    Clay, D.R.

    1990-01-01

    The U.S. Environmental Protection Agency (EPA) developed the manual to provide introductory information on the solid and hazardous waste management programs under the Resource Conservation and Recovery Act (RCRA). The manual outlines the basic framework of the regulatory program for new EPA and State employees, those persons new to RCRA assignments, and others interested in the Act. The manual is not, however, meant to replace in-depth analysis of the statute and its associated regulations and Agency guidance. The manual is an update of the original RCRA Orientation Manual issued in 1986. Revisions contained in the update reflect the many regulatory changes that have resulted from both the Hazardous and Solid Waste Amendments (HSWA) of 1984 and the Medical Waste Tracking Act of 1988 (RCRA Subtitle J).

  15. OSH technical reference manual

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  16. FRMAC Operations Manual

    SciTech Connect (OSTI)

    Frandsen, K.

    2010-05-01

    In the event of a major radiological incident, the Federal Radiological Monitoring and Assessment Center (FRMAC) will coordinate the federal agencies that have various statutory responsibilities. The FRMAC is responsible for coordinating all environmental radiological monitoring, sampling, and assessment activities for the response. This manual describes the FRMAC’s response activities in a radiological incident. It also outlines how FRMAC fits in the National Incident Management System (NIMS) under the National Response Framework (NRF) and describes the federal assets and subsequent operational activities which provide federal radiological monitoring and assessment of the affected areas. In the event of a potential or existing major radiological incident, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is responsible for establishing and managing the FRMAC during the initial phases.

  17. Surface Environmental Surveillance Procedures Manual

    SciTech Connect (OSTI)

    Hanf, RW; Dirkes, RL

    1990-02-01

    This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.

  18. Integrated Safety Management System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-11-01

    This manual provides requirements and guidance for DOE and contractors to ensure development and implementation of an effective Integrated Safety Management system that is periodically reviewed and continuously improved. Canceled by DOE O 450.2.

  19. Chemistry 2B Laboratory Manual

    E-Print Network [OSTI]

    Guo, Ting

    Chemistry 2B Laboratory Manual Standard Operating Procedures Department of Chemistry University # ____________ Laboratory Information Teaching Assistant's Name _______________________ Laboratory Section Number _______________________ Laboratory Room Number _______________________ Dispensary Room Number 1060 Sciences Lab Building Location

  20. AEROSPACE LABORATORY GENERAL INFORMATION MANUAL

    E-Print Network [OSTI]

    Prodić, Aleksandar

    AEROSPACE LABORATORY GENERAL INFORMATION MANUAL 1. Introduction 2. Laboratory Format 3. Recommended Guidelines for Experiment Reports 4. Laboratory Notebooks 5. Report Marking Procedures 6. Course Mark compared to the systems you will find in the Undergraduate Laboratory. Typically, experimental setups

  1. Chemistry 2A Laboratory Manual

    E-Print Network [OSTI]

    Guo, Ting

    Chemistry 2A Laboratory Manual Standard Operating Procedures Department of Chemistry University # ____________ Laboratory Information Teaching Assistant's Name _______________________ Laboratory Section Number _______________________ Laboratory Room Number _______________________ Dispensary Room Number 1060 Sciences Lab Building Location

  2. Chemistry 2C Laboratory Manual

    E-Print Network [OSTI]

    Guo, Ting

    Chemistry 2C Laboratory Manual Standard Operating Procedures Department of Chemistry University # ____________ Laboratory Information Teaching Assistant's Name _______________________ Laboratory Section Number _______________________ Laboratory Room Number _______________________ Dispensary Room Number 1060 Sciences Lab Building Location

  3. Manual for Identifying Classified Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-08-28

    The Manual provides detailed requirements to supplement DOE O 475.2, Identifying Classified Information, dated 8/28/07. Cancels DOE M 475.1-1A; canceled by DOE O 475.2A

  4. Financial Policy Manual ACCOUNTING POLICIES

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 ACCOUNTING POLICIES 1101 General Accounting Policy ­ University Financial Activity 1102 General Accounting Policy ­ Financial Resources 1103 Accounting System Maintenance ACCOUNTING - UNIVERSITY FINANCIAL ACTIVITY Effective: December 1986 Revised: May 2006 Last Reviewed: March

  5. Emergency Preparedness Desk Reference Manual

    E-Print Network [OSTI]

    Patzek, Tadeusz W.

    Emergency Preparedness Desk Reference Manual Important Phone Numbers Medical Emergencies / Hazardous Material Fire Emergencies Vehicle Accidents Evacuation Weather Emergencies Building/System Problem or Failure Threat of Violence Terrorism Interpersonal Emergencies Next Page >>> #12;Important Phone Numbers

  6. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12

    The Manual establishes minimum implementation standards for cyber security management processes throughout the Department. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B. No cancellations.

  7. CMS plotter graphics training manual

    SciTech Connect (OSTI)

    Cawby, R.D.

    1981-03-01

    This manual includes explanations of several graphics programs that use a Conversation Monitor System (CMS) terminal and a table-top plotter to produce a copy on bond paper or transparency film. 13 figures.

  8. State authorization manual. Volume 1

    SciTech Connect (OSTI)

    Brugler-Jones, S.

    1990-10-01

    The State Authorization Manual (SAM) (Vol. I) provides guidance for States applying for program revisions to their authorized RCRA State program. The SAM is an updated version of the 1988 State Consolidated RCRA Authorization Manual (SCRAM). It focuses on program revision applications rather than initial applications since most States have received initial authorization for the RCRA program. The SCRAM should continue to be used to assist States not yet authorized under the RCRA program.

  9. Manual transmission shift linkage

    SciTech Connect (OSTI)

    Sewell, J.S.

    1991-10-01

    This patent describes a sliding gear manual transmission (10) for an automotive vehicle including a transmission housing (11), an input shaft (12) journalled in the housing, an output shaft (13) axially aligned with the input shaft and journalled in the housing, a countershaft (15) journalled in the housing and carrying a cluster gear (17) thereon, the input shaft (12) terminating in an input gear (14), a plurality of gears (26,27,28,29,31,31) on the output shaft (13) in meshing engagement with the cluster gear (17), and a plurality of synchronizing clutches (36,38,41,42) on the output shaft and countershaft for engagement of gear ratios of the meshing gears, and an axially movable and rotatable shift rail (81) located in the housing and operatively connected to a shift lever (82) actuated by the vehicle operator, the improvement comprising an auxiliary shift rail (98) located in the housing (11) generally paralleling the first mentioned shift rail (81) to provide for actuation of fifth, sixth and reverse gears the auxiliary shift rail (98) having a 5-6 shift arm (104) journalled thereon for axial movement relative thereto, and a reverse shift arm (99) rotatably mounted thereon for axial movement therewith.

  10. JSATS Decoder Software Manual

    SciTech Connect (OSTI)

    Flory, Adam E.; Lamarche, Brian L.; Weiland, Mark A.

    2013-05-01

    The Juvenile Salmon Acoustic Telemetry System (JSATS) Decoder is a software application that converts a digitized acoustic signal (a waveform stored in the .bwm file format) into a list of potential JSATS Acoustic MicroTransmitter (AMT) tagcodes along with other data about the signal including time of arrival and signal to noise ratios (SNR). This software is capable of decoding single files, directories, and viewing raw acoustic waveforms. When coupled with the JSATS Detector, the Decoder is capable of decoding in ‘real-time’ and can also provide statistical information about acoustic beacons placed within receive range of hydrophones within a JSATS array. This document details the features and functionality of the software. The document begins with software installation instructions (section 2), followed in order by instructions for decoder setup (section 3), decoding process initiation (section 4), then monitoring of beacons (section 5) using real-time decoding features. The last section in the manual describes the beacon, beacon statistics, and the results file formats. This document does not consider the raw binary waveform file format.

  11. Manual braille writer

    DOE Patents [OSTI]

    Hawk, Lawrence S. (Lenior City, TN); Turner, Joe H. (Knoxville, TN)

    1992-01-01

    A manual-type braille writer that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted.

  12. Manual braille writer

    DOE Patents [OSTI]

    Hawk, L.S.; Turner, J.H.

    1992-07-28

    A manual-type braille writer is described that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted. 10 figs.

  13. Memorandum, Implementation of Department of Energy Manual 450...

    Broader source: Energy.gov (indexed) [DOE]

    Implementation of Department of Energy Manual 450.4-1, "Integrated Safety Management System Manual". The DOE Integrated Safety Management (ISM) System Manual was issued...

  14. Hydrogen Fuel Cell Engines and Related Technologies Course Manual...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engines and Related Technologies Course Manual Hydrogen Fuel Cell Engines and Related Technologies Course Manual This course manual features technical information on the use of...

  15. SOWFA + Super Controller User's Manual

    SciTech Connect (OSTI)

    Fleming, P.; Gebraad, P.; Churchfield, M.; Lee, S.; Johnson, K.; Michalakes, J.; van Wingerden, J. W.; Moriarty, P.

    2013-08-01

    SOWFA + Super Controller is a modification of the NREL's SOWFA tool which allows for a user to apply multiturbine or centralized wind plant control algorithms within the high-fidelity SOWFA simulation environment. The tool is currently a branch of the main SOWFA program, but will one day will be merged into a single version. This manual introduces the tool and provides examples such that a user can implement their own super controller and set up and run simulations. The manual only discusses enough about SOWFA itself to allow for the customization of controllers and running of simulations, and details of SOWFA itself are reported elsewhere Churchfield and Lee (2013); Churchfield et al. (2012). SOWFA + Super Controller, and this manual, are in alpha mode.

  16. Audit Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataEnergy Webinar:I Due DateOpportunityManual Audit Manual 2014 Office of

  17. ENVIRONMENTAL HEALTH, SAFETY, AND RISK MANAGEMENT COMPREHENSIVE MANUAL

    E-Print Network [OSTI]

    ENVIRONMENTAL HEALTH, SAFETY, AND RISK MANAGEMENT COMPREHENSIVE MANUAL Table of Contents Mission Manual Chapter VIII - Radiation Safety Technical Manual Chapter IX - Risk Management Technical Manual public. For this reason, the Environmental Health, Safety and Risk Management Department (EHSRM

  18. Financial Policy Manual RISK MANAGEMENT POLICIES

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    Financial Policy Manual Page 1 RISK MANAGEMENT POLICIES 2601 Departmental Scope & Responsibility;Financial Policy Manual Page 1 2601 DEPARTMENTAL SCOPE & RESPONSIBILITY Subject: Risk Management & Insurance Effective: December 1986 Revised: May 2011 Last Reviewed: March 2014 Resp. Office: Risk Management

  19. PROPERTY MANUAL Berkeley Laboratory Property Management

    E-Print Network [OSTI]

    Knowles, David William

    B: Sensitive Item Policy · APPENDIX C: Glossary Property Management System Review Property Manual of Energy (DOE). The Property Management charter ensures the efficient and effective protection and controlPROPERTY MANUAL Issued by Berkeley Laboratory Property Management Lawrence Berkeley National

  20. Explosive Safety Manual, to a New Order

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-12-02

    This memorandum provides justification for the conversion of Department of Energy (DOE) Manual (M) 440.1-1A, DOE Explosives Safety Manual, dated 1-9-06, into a new DOE Order.

  1. Physical capabilities of experienced manual material handlers 

    E-Print Network [OSTI]

    Wingate, Kyle Alan

    1997-01-01

    This study was conducted on 442 (403 male, 39 female) experienced manual material handlers from various companies that possess a high amount of manual material handlers in order to determine their physical condition. Although all 442 volunteers...

  2. Jefferson Lab Project Control System Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Project Control System Manual Technical Engineering Development Facility (TEDF) Utilities Infrastructure Modernization (UIM) Office of Project Management Project Control...

  3. Time and Labor Manual -Time Keepers -LSUSH

    E-Print Network [OSTI]

    Time and Labor Manual - Time Keepers - LSUSH Version Date: July 2012 #12;COPYRIGHT & TRADEMARKS create a risk of personal injury. If you use this software in dangerous applications, then you shall Guide Time and Labor Manual - Time Keepers - LSUSH Page iii Table of Contents Time and Labor Manual

  4. LASER SAFETY MANUAL 2014 RICE UNIVERSITY 1

    E-Print Network [OSTI]

    Natelson, Douglas

    LASER SAFETY MANUAL 2014 RICE UNIVERSITY 1 Rice University Laser Safety Manual Environmental Health and Safety MS 123 P.O. Box 1892 Houston, TX 77251-1892 January 2014 #12;LASER SAFETY MANUAL 2014 RICE UNIVERSITY 2 Introduction The objective of the Rice University Laser Safety program is to assist all levels

  5. North Carolina State Residence Classification Manual

    E-Print Network [OSTI]

    McLaughlin, Richard M.

    North Carolina State Residence Classification Manual A Manual to Assist the Public Higher Education Institutions of North Carolina in the Matter of State Residence Fall 2011 #12;North Carolina State Residence. Ross pursuant to The University of North Carolina Policy Manual Sec. 900.1 for use by con- stituent

  6. March 2, 1995 R++ User Manual

    E-Print Network [OSTI]

    Jeffrey, Alan

    March 2, 1995 R++ User Manual AT&T Bell Laboratories 480 Red Hill Road Middletown, NJ 07748­3052 USA March 1995 Rules Methods Objects #12; March 2, 1995 Copyright © 1995 AT&T. All rights reserved. #12; ­iii March 2, 1995 Issue Contents R++ User Manual 1 R++ User Manual iii Goals Preface­1 Audience

  7. World Health Organization Laboratory biosafety manual

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    World Health Organization Geneva 2004 Laboratory biosafety manual Third edition #12;WHO Library Cataloguing-in-Publication Data World Health Organization. Laboratory biosafety manual. ­ 3rd ed. 1 4.Manuals I.Title. ISBN 92 4 154650 6 (LC/NLM classification: QY 25) WHO/CDS/CSR/LYO/2004.11 © World

  8. APPLICANT HANDBOOK A PROCEDURAL MANUAL

    E-Print Network [OSTI]

    Dennett, Daniel

    APPLICANT HANDBOOK A PROCEDURAL MANUAL FOR HEALTH PROFESSIONS STUDENTS Prepared by the Director and Associate Director for Health Professions Advising Tufts University 2015-16 Found online at http applies to other doctoral level health professions as well, but you should consult with Carol Baffi

  9. Radioactive Material Transportation Practices Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-06-04

    This Manual establishes standard transportation practices for the Department of Energy, including National Nuclear Security Administration to use in planning and executing offsite shipments of radioactive materials and waste. The revision reflects ongoing collaboration of DOE and outside organizations on the transportation of radioactive material and waste. Supersedes DOE M 460.2-1.

  10. COE1 Calorimeter Operations Manual

    SciTech Connect (OSTI)

    Santi, Peter Angelo

    2015-12-15

    The purpose of this manual is to describe the operations of the COE1 calorimeter which is used to measure the thermal power generated by the radioactive decay of plutonium bearing materials for the purposes of assaying the amount of plutonium within the material.

  11. Cyber Security Incident Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-08

    The manual establishes minimum requirements for a structured cyber security incident detection and management process for detecting, identifying, categorizing, containing, reporting, and mitigating cyber security incidents involving DOE information and information systems operated by DOE or by contractors on behalf of the Department. No cancellations.

  12. Cyber Security Incident Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-08

    The manual establishes minimum requirements for a structured cyber security incident detection and management process for detecting, identifying, categorizing, containing, reporting, and mitigating cyber security incidents involving DOE information and information systems operated by DOE or by contractors on behalf of the Department. No cancellations. Admin Chg 1 dated 9-1-09.

  13. PNNL Hoisting and Rigging Manual

    SciTech Connect (OSTI)

    Haynie, Todd O.; Fullmer, Michael W.

    2008-12-29

    This manual describes the safe and cost effective operation, inspection, maintenance, and repair requirements for cranes, hoists, fork trucks, slings, rigging hardware, and hoisting equipment. It is intended to be a user's guide to requirements, codes, laws, regulations, standards, and practices that apply to Pacific Northwest National Laboratory (PNNL) and its subcontractors.

  14. Maintenance neutron coincidence counter manual

    SciTech Connect (OSTI)

    Krick, M.S.; Polk, P.J.; Atencio, J.D.

    1989-09-01

    A compact thermal-neutron coincidence counter has been constructed specifically for use by the International Atomic Energy Agency as a reference neutron detector for maintenance activities. The counter is designed for use only with {sup 252}Cf sources in SR-CF-100 capsules. This manual describes the detector's mechanical and electrical components and its operating characteristics. 2 refs., 8 figs.

  15. Short Manual Software Modules for

    E-Print Network [OSTI]

    Ould Ahmedou, Mohameden

    1 Short Manual Software Modules for Format Conversion, Transformation, and Synthesis 1 Introduction This document includes a short description of calling syntax and handling of the software modules developed describes the software installation process, chapter 3 shows the calling syntax of the SIF-to-CDFG format

  16. Internal dosimetry technical basis manual

    SciTech Connect (OSTI)

    Not Available

    1990-12-20

    The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

  17. Plutonium nitrate bottle counter manual

    SciTech Connect (OSTI)

    Menlove, H.O.; Adams, E.L.; Holbrooks, O.R.

    1984-03-01

    A neutron coincidence counter has been designed for plutonium nitrate assay in large storage bottles. This assay system can be used in the reprocessing plant or in the nitrate-to-oxide conversion facility. The system is based on the family of neutron detectors similar to the high-level neutron coincidence counter. This manual describes the system and gives performance and calibration parameters for typical applications. 4 references, 11 figures, 9 tables.

  18. LASER Safety Manual August 2007

    E-Print Network [OSTI]

    UW LASER Safety Manual August 2007 Radiation Safety Office Environmental Health and Safety;Contents 1. Laser Basics 1.1 Laser Theory 1.2 Types of Lasers 2. Hazards and Safety Standards 2 2.6.4 Other Hazards 2.7 Hazard Classes 2.7.1 Introduction 2.7.2 Class 3B Lasers 2.7.3 Class 4 Lasers

  19. Surface Environmental Surveillance Procedures Manual

    SciTech Connect (OSTI)

    RW Hanf; TM Poston

    2000-09-20

    Environmental surveillance data are used in assessing the impact of current and past site operations on human health and the environment, demonstrating compliance with applicable local, state, and federal environmental regulations, and verifying the adequacy of containment and effluent controls. SESP sampling schedules are reviewed, revised, and published each calendar year in the Hanford Site Environmental Surveillance Master Sampling Schedule. Environmental samples are collected by SESP staff in accordance with the approved sample collection procedures documented in this manual.

  20. Cyber Security Incident Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-08

    The manual establishes minimum requirements for a structured cyber security incident detection and management process for detecting, identifying, categorizing, containing, reporting, and mitigating cyber security incidents involving DOE information and information systems operated by DOE or by contractors on behalf of the Department. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B.

  1. Vegetation Change Analysis User's Manual

    SciTech Connect (OSTI)

    D. J. Hansen; W. K. Ostler

    2002-10-01

    Approximately 70 percent of all U.S. military training lands are located in arid and semi-arid areas. Training activities in such areas frequently adversely affect vegetation, damaging plants and reducing the resilience of vegetation to recover once disturbed. Fugitive dust resulting from a loss of vegetation creates additional problems for human health, increasing accidents due to decreased visibility, and increasing maintenance costs for roads, vehicles, and equipment. Diagnostic techniques are needed to identify thresholds of sustainable military use. A cooperative effort among U.S. Department of Energy, U.S. Department of Defense, and selected university scientists was undertaken to focus on developing new techniques for monitoring and mitigating military impacts in arid lands. This manual focuses on the development of new monitoring techniques that have been implemented at Fort Irwin, California. New mitigation techniques are described in a separate companion manual. This User's Manual is designed to address diagnostic capabilities needed to distinguish between various degrees of sustainable and nonsustainable impacts due to military training and testing and habitat-disturbing activities in desert ecosystems. Techniques described here focus on the use of high-resolution imagery and the application of image-processing techniques developed primarily for medical research. A discussion is provided about the measurement of plant biomass and shrub canopy cover in arid. lands using conventional methods. Both semiquantitative methods and quantitative methods are discussed and reference to current literature is provided. A background about the use of digital imagery to measure vegetation is presented.

  2. SPRINGFIELD ARMORY 1911-A1 PISTOLS OPERATION AND SAFETY MANUAL

    E-Print Network [OSTI]

    Westall, James M.

    SPRINGFIELD ARMORY® 1911-A1 PISTOLS OPERATION AND SAFETY MANUAL Important Safety Information Inside Read this manual before handling this firearm. Keep this manual with your pistol and review it before or fire your pistol until they have read this manual. Transfer this manual with the firearm upon ownership

  3. Radiological Control Manual. Revision 0, January 1993

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  4. Power Marketing Administration Emergency Management Program Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-09-18

    This Manual establishes emergency management policy and requirements for emergency planning, preparedness, readiness assurance, and response for the Department's Power Marketing Administrations. Supersedes DOE O 5500.11.

  5. Incident Prevention, Warning, and Response (IPWAR) Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-09-30

    This Manual defines a structured, cohesive, and consistent process for performing incident prevention, warning, and response for DOE's Federal information systems and is consistent with the requirements of Federal laws, Executive orders, national security directives, and other regulations. The Manual also provides requirements and implementation instructions for the Department's Incident Prevention, Warning and Response process, and supplements DOE O 205.1, Department of Energy Cyber Security Management Program, dated 3-21-03. DOE N 205.17 cancels this manual. This manual cancels DOE N 205.4, Handling Cyber Security Alerts and Advisories and Reporting Cyber Security Incidents, dated 3/18/2002.

  6. WHO Technical Manual on Tobacco Tax Administration

    E-Print Network [OSTI]

    2010-01-01

    on Tobacco Tax Administration WHO Library Cataloguing-in-manual on tobacco tax administration. 1. Taxes. 2. Tobaccofor Tax Policy and Administration (2008). Forum on tax

  7. Financial Policy Manual 2701 INTERNAL CONTROL POLICY

    E-Print Network [OSTI]

    George, Edward I.

    , budgets, schedules, job assignment and monitoring sheets, policy and procedure manuals, organization charts, job descriptions, employee training programs and various quality controls. C. Establish

  8. Financial Policy Manual INTERNAL CONTROL POLICIES

    E-Print Network [OSTI]

    George, Edward I.

    , budgets, schedules, job assignment and monitoring sheets, policy and procedure manuals, organization charts, job descriptions, employee training programs and various quality controls. C. Establish

  9. Classified Information Systems Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-08-03

    This Manual provides requirements and implementation instructions for the graded protection of the confidentiality, integrity, and availability of information processed on all automated information systems used to collect, create, process, transmit, store, and disseminate classified information by, or on behalf of, the Department of Energy (DOE). DOE N 205.4 cancels Chapter III section 8, Incident Reporting, and DOE N 205.3 cancels Chapter VI, paragraph 4j(2), 4j(6); and Chapter VII, paragraph 12a(2)(a). Cancels: DOE M 5639.6A-1. Canceled by DOE M 205.1-4.

  10. The RadAssessor manual

    SciTech Connect (OSTI)

    Seitz, Sharon L.

    2007-02-01

    THIS manual will describe the functions and capabilities that are available from the RadAssessor database and will demonstrate how to retrieve and view its information. You’ll learn how to start the database application, how to log in, how to use the common commands, and how to use the online help if you have a question or need extra guidance. RadAssessor can be viewed from any standard web browser. Therefore, you will not need to install any special software before using RadAssessor.

  11. Sierra/SM theory manual.

    SciTech Connect (OSTI)

    Crane, Nathan Karl

    2013-07-01

    Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilites come closer to production level.

  12. Manual

    Energy Savers [EERE]

    to larger materials). These more reactive particles can enter the body through the lungs or digestive tract, and nanomaterials may also enter the body through absorption...

  13. Manual

    Energy Savers [EERE]

    were missed or not adequately communicated to the workers for hazards including noise, welding activities, and electrical arc flashes. In addition, some work controls are not...

  14. Manual

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to the EDO and facility workers, and support of the incident commander. A site emergency management program procedure is in place that governs facility personnel...

  15. Manual

    Broader source: Energy.gov (indexed) [DOE]

    Nuclear Safety at the Oak Ridge National Laboratory Radiochemical Engineering Development Center, Building 7920 October 2008 Office of Environment, Safety and Health Evaluations...

  16. Manual

    Energy Savers [EERE]

    and Development RMWMF Radioactive and Mixed Waste Management Facility RWNMDD Regulated WasteNuclear Material Disposition Department SAC Specific Administrative Control SME...

  17. Manual

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOE Safetyof Energy ThisSites | DepartmentRebate Program |of Nuclear

  18. Automated manual transmission clutch controller

    DOE Patents [OSTI]

    Lawrie, Robert E. (9375 Kearney Rd., Whitmore Lake, MI 48189); Reed, Jr., Richard G. (3003 Bembridge, Royal Oak, MI 48073); Rausen, David J. (519 S. Gaylord St., Denver, CO 80209)

    1999-11-30

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  19. TAP 1, Training Program Manual

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    Training programs at DOE nuclear facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs.

  20. Engineer Manual 1110-2-4205

    E-Print Network [OSTI]

    US Army Corps of Engineers

    , DC 20314-1000 EM 1110-2-4205 30 June 1995 Engineering and Design HYDROELECTRIC POWER PLANTS-1000 Manual No. 1110-2-4205 30 June 1995 Engineering and Design HYDROELECTRIC POWER PLANTS MECHANICAL DESIGN 1 and selection of hydroelectric power plant mechanical equipment and systems. 2. Applicability. This manual

  1. LMD Martian Mesoscale Model User Manual

    E-Print Network [OSTI]

    Spiga, Aymeric

    LMD Martian Mesoscale Model [LMD-MMM] User Manual A. Spiga aymeric.spiga@upmc.fr Laboratoire de;#12;Contents 1 What is the LMD Martian Mesoscale Model? 3 1.1 Dynamical core on mesoscale levels . . . . . . . . . . . . . . . 35 iii #12;iv User Manual for the LMD Martian Mesoscale Model

  2. The Virginia Yard-Waste Management Manual

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    The Virginia Yard-Waste Management Manual Second Edition PUBLICATION 452-055 #12;#12;The Virginia Yard-Waste Management Manual Second Edition Prepared by: Gregory K. Evanylo, Caroline A. Sherony, James a grant from the Virginia Department of Waste Management (now a Division of the Department

  3. Boiling Water CanningProject Manual

    E-Print Network [OSTI]

    O'Laughlin, Jay

    Boiling Water CanningProject Manual pnW 652 a pacific northwest extension publication University preservation series contains four manuals: Freezing for ages 8­18 Drying for ages 8­18 Boiling water canning199/pnw199.pdf canning tomatoes and tomato products, pnW 300 http://extension.oregonstate.edu/catalog

  4. HOUSING DEPARTMENT MANUAL Table of Contents

    E-Print Network [OSTI]

    HOUSING DEPARTMENT MANUAL Table of Contents Section 1 ­ Introduction Section 2 ­ Mission Statement Section 3 ­ Vision Section 4 ­ The Housing Department Location Section 5 ­ The Housing Department Team@aub.edu.lb. Last updated on: May 8, 2014 #12;Housing Department Manual Page 2 Section 1 - Introduction The Housing

  5. R Reference Manual: A gentle overview

    E-Print Network [OSTI]

    Priestley, Jennifer Lewis

    , yet similar to SAS, R is a commands-driven programming environment to execute statistical analysisR Reference Manual: A gentle overview #12;2 Developed and maintained by the Center for Statistics statistical computing packages ­ Excel, SPSS, Minitab, R and SAS. 1 Readers of this manual are assumed to have

  6. Davis PV plant operation and maintenance manual

    SciTech Connect (OSTI)

    1994-09-01

    This operation and maintenance manual contains the information necessary to run the Photovoltaics for Utility Scale Applications (PVUSA) test facility in Davis, California. References to more specific information available in drawings, data sheets, files, or vendor manuals are included. The PVUSA is a national cooperative research and demonstration program formed in 1987 to assess the potential of utility scale photovoltaic systems.

  7. Information Security Policy Manual Latest Revision: May 16, 2012

    E-Print Network [OSTI]

    Alpay, S. Pamir

    1 Information Security Policy Manual Latest Revision: May 16, 2012 #12;2 Table of Contents Information Security Policy Manual...............................................................................................................................................17 Information Security Glossary

  8. User's manual for the vertical axis wind turbine performance...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: User's manual for the vertical axis wind turbine performance computer code darter Citation Details In-Document Search Title: User's manual for the vertical axis...

  9. User's manual for the vertical axis wind turbine performance...

    Office of Scientific and Technical Information (OSTI)

    User's manual for the vertical axis wind turbine performance computer code darter Citation Details In-Document Search Title: User's manual for the vertical axis wind turbine...

  10. Guidelines for water use. Manual

    SciTech Connect (OSTI)

    Crook, J.; Ammerman, D.

    1992-09-01

    The manual is a valuable tool for regulatory agencies at all levels of government, engineers, planners, and all other groups affected by water reuse problems. Key water reuse planning issues are identified and discussed in a manner that librally employs case study experience to illustrate the importance of each issue and successful solutions. A comprehensive listing of state water reuse guidelines by category of reuse is provided, along with an analysis of the variations between states within each category. The analysis is then followed with a series of suggested guidelines for water quality required for each category of reuse. These guidelines are based on the state guidelines and experience described earlier, and they offer a suggested starting point for state, regional, and local governments that plan to establish water reuse procedures, both in terms of water quality requirements and procedures for design, operation, and monitoring.

  11. SNAP operating system reference manual

    SciTech Connect (OSTI)

    Sabuda, J.D.; Polito, J.; Walker, J.L.; Grant, F.H. III

    1982-03-01

    The SNAP Operating System (SOS) is a FORTRAN 77 program which provides assistance to the safeguards analyst who uses the Safeguards Automated Facility Evaluation (SAFE) and the Safeguards Network Analysis Procedure (SNAP) techniques. Features offered by SOS are a data base system for storing a library of SNAP applications, computer graphics representation of SNAP models, a computer graphics editor to develop and modify SNAP models, a SAFE-to-SNAP interface, automatic generation of SNAP input data, and a computer graphic post-processor for SNAP. The SOS Reference Manual provides detailed application information concerning SOS as well as a detailed discussion of all SOS components and their associated command input formats. SOS was developed for the US Nuclear Regulatory Commission's Office of Nuclear Regulatory Research and the US Naval Surface Weapons Center by Pritsker and Associates, Inc., under contract to Sandia National Laboratories.

  12. Heat pump system with hot water defrost

    SciTech Connect (OSTI)

    Dudley, K.F.

    1988-08-30

    This patent describes an integrated heat pump and hot water system that includes, a heat pump having an indoor heat exchanger unit and an outdoor heat exchanger unit that are selectively connected to a compressor inlet and a compressor outlet by a flow reversing means and to each other by a flow reversing means and to each other by a refrigerant liquid line containing a bi-flow expansion valve for metering refrigerant moving in either direction through the liquid line, and bi-flow expansion valve having a positive shut off means to prevent refrigerant from flowing therethrough, a refrigerant to water heat exchanger having a water flow circuit that is in heat transfer relation with a first refrigerant condensing circuit and a second refrigerant evaporating circuit. The refrigerant condensing circuit is connected into a discharge line connecting the outlet of the compressor to the reversing means whereby all the refrigerant discharged by the compressor passes through the condensing circuit. The refrigerant evaporating circuit is connected at one end to the inlet of the compressor and at the other end to an evaporator line that is operatively joined to the liquid line at a point between the bi-flow expansion valve and the outdoor heat exchanger, a metering valve in the evaporator line that is selectively movable between a first closed position whereby refrigerant is prevented from moving through the evaporator line and an open position whereby refrigerant is throttled from the liquid line into the evaporator circuit.

  13. Policy ManualPolicy ManualPolicy ManualPolicy Manual Ph.D. in Public AdministrationPh.D. in Public AdministrationPh.D. in Public AdministrationPh.D. in Public Administration

    E-Print Network [OSTI]

    Fernandez, Eduardo

    Policy ManualPolicy ManualPolicy ManualPolicy Manual Ph.D. in Public AdministrationPh.D. in Public AdministrationPh.D. in Public AdministrationPh.D. in Public Administration School of Public Administration .................................................................................................................. 14 #12;- 2 - 1. OVERVIEW1. OVERVIEW1. OVERVIEW1. OVERVIEW The School of Public Administration

  14. Environment Safety and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-30

    This Manual provides detailed requirements to supplement DOE O 231.1, Environment, Safety and Health Reporting, which establishes management objectives and requirements for reporting environment, safety and health information. Does not cancel other directives.

  15. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-11-07

    This Manual provides detailed requirements to supplement DOE O 231.1, ENVIRONMENT, SAFETY AND HEALTH REPORTING, which establishes management objectives and requirements for reporting environment, safety and health information. Chg 1, 11-7-96.

  16. Productivity Improvement of a Manual Assembly Line 

    E-Print Network [OSTI]

    Yerasi, Pranavi

    2012-10-19

    The current project addresses the productivity improvement of a manual assembly line by making use of operations analysis in the framework of Lean production. A methodology is proposed that helps to improve the productivity of any production process...

  17. Laboratory Safety Manual Table of Contents

    E-Print Network [OSTI]

    Natelson, Douglas

    Laboratory Safety Manual Table of Contents I. Emergency Procedures a. Laboratory Contact Information b. Location of Laboratory Emergency Equipment c. Laboratory Hazard and Evacuation Maps d. University Emergency Procedures II. University Policies and Procedures a. Rice University Laboratory Safety

  18. Safety Management Functions, Responsibilities, and Authorities Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-12-31

    This Manual defines safety management functions, responsibilities, and authorities for DOE senior management with responsibilities for line, support, oversight, and enforcement actions. Cancels DOE M 411.1-1B. Canceled by DOE O 450.2.

  19. Safety Management Functions, Responsibilities, and Authorities Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-10-08

    This Manual defines safety management functions, responsibilities, and authorities for DOE senior management with responsibilities for line, support, oversight, and enforcement actions. Canceled by DOE M 411.1-1A. Does not cancel other directives.

  20. Paper Airplane user's manual : version four

    E-Print Network [OSTI]

    Lajoie, Ronnie M.

    Preface: This document provides the user with a step-by-step guide to using Paper Airplane, Version IV. Although this program can be used to design any system (once given the proper set of design equations), this manual ...

  1. Robotics Learning Center Milling Machine Operation Manual

    E-Print Network [OSTI]

    Miller, Damon A.

    Robotics Learning Center Milling Machine Operation Manual Ken Gruel, Dr. Massood Atashbar, RyanMaster.............................................................................................................. 16 6. Milling Machine Operation for the operation of the LPKF® milling machine, and then gives an overview of the physical operation of the machine

  2. Power Marketing Administration Emergency Management Program Manual...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cancels DOE O 5500.11. m1511-1.pdf -- PDF Document, 58 KB Writer: David Freshwater Subjects: Management and Operations Safety Security ID: DOE M 151.1-1 Type: Manual OPI: NA -...

  3. Alternative Fuel Driver Training Companion Manual

    SciTech Connect (OSTI)

    Not Available

    2005-09-01

    Training manual serves as a companion to alternative fuel training presentations on the fueling and use of vehicles that run on compressed natural gas, biodiesel, E85, and propane.

  4. RIS-M-2480 USERS MANUAL

    E-Print Network [OSTI]

    RISĂ?-M-2480 RIKKE USERS MANUAL P. Haastrup, J.V. Olsen, J.R. Taylor, Axel Damborg and N and failure analysis used in the system is described in Automatic Fault Tree and Consequence Analysis (Taylor

  5. DOE Manual Studies Terrestrial Carbon Sequestration

    Broader source: Energy.gov [DOE]

    There is considerable opportunity and growing technical sophistication to make terrestrial carbon sequestration both practical and effective, according to the latest carbon capture and storage "best practices" manual issued by the U.S. Department of Energy.

  6. Training Manuals All up to date training manuals can be found at the Student Information Users Group in PAWS.

    E-Print Network [OSTI]

    Saskatchewan, University of

    Training Manuals All up to date training manuals can be found at the Student Information Users on Files (left side) d. Click on Training Manuals e. Click on the Class Maintenance file f. Building New a member.) c. Click on Files (left side) d. Click on Training Manuals e. Click on the Registration file f

  7. Home audit program: management manual

    SciTech Connect (OSTI)

    Not Available

    1980-09-01

    Many public power systems have initiated home energy audit programs in response to the requests of their consumers. The manual provides smaller public power systems with the information and specific skills needed to design and develop a program of residential energy audits. The program is based on the following precepts: locally owned public systems are the best, and in many cases the only agencies available to organize and coordinate energy conservation programs in many smaller communities; consumers' rights to energy conservation information and assistance should not hinge on the size of the utility that serves them; in the short run, public power systems of all sizes should offer residential energy conservation assistance to their consumers, because such assistance is desirable, necessary, and in the public interest; and in the long run, such programs will complement national energy goals and will produce economic benefits for both consumers and the public power system. A detailed description of home audit program planning, organization, and management are given. (MCW)

  8. 1982 Oregon energy resource manual

    SciTech Connect (OSTI)

    Ebert, R.; Ebert, J. (eds.)

    1982-01-01

    This manual is divided into three distinct sections. Part one contains 40 passive solar home plans designed for the Pacific Northwest by Oregon architects and designers. Floor plans and exterior renderings of multi-family and single-family dwellings, earth sheltered and bermed designs, and light commercial structures are included. The degree of solar contribution each residence achieves is graphically presented for ease of understanding. Part two, renewable-energy-resource guide, is primarily designed as a locator to indepth publications that explain specific energy resources in detail. It contains illustrated book reviews of pertinent private and government publications available. Various tables, forms, diagrams, energy system evaluation criteria, an illustrated glossary, BPA energy programs, utility programs, financial outlooks and non-profit organizations are included. The product locator index makes up part three. This indexed directory contains the listings of businesses, including the address, phone number, contact person and a 30 to 50 word description of the product or services currently offered. These renewable energy companies range from architectural and engineering services to research and development firms.

  9. Insolation data manual and direct normal solar radiation data manual

    SciTech Connect (OSTI)

    none,

    1990-07-01

    The Insolation Data Manual presents monthly averaged data which describes the availability of solar radiation at 248 National Weather Service (NWS) stations, principally in the United States. Monthly and annual average daily insolation and temperature values have been computed from a base of 24--25 years of data, generally from 1952--1975, and listed for each location. Insolation values represent monthly average daily totals of global radiation on a horizontal surface and are depicted using the three units of measurement: kJ/m{sup 2} per day, Btu/ft{sup 2} per day and langleys per day. Average daily maximum, minimum and monthly temperatures are provided for most locations in both Celsius and Fahrenheit. Heating and cooling degree-days were computed relative to a base of 18.3 C (65 F). For each station, global {bar K}{sub T} (cloudiness index) values were calculated on a monthly and annual basis. Global {bar K}{sub T} is an index of cloudiness and indicates fractional transmittance of horizontal radiation, from the top of the atmosphere to the earth's surface. The second section of this volume presents long-term monthly and annual averages of direct normal solar radiation for 235 NWS stations, including a discussion of the basic derivation process. This effort is in response to a generally recognized need for reliable direct normal data and the recent availability of 23 years of hourly averages for 235 stations. The relative inaccessibility of these data on microfiche further justifies reproducing at least the long-term averages in a useful format. In addition to a definition of terms and an overview of the ADIPA model, a discussion of model validation results is presented.

  10. NV/YMP RADIOLOGICAL CONTROL MANUAL

    SciTech Connect (OSTI)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION NEVADA SITE OFFICE; BECHTEL NEVADA

    2004-11-01

    This manual contains the radiological control requirements to be used for all radiological activities conducted by programs under the purview of the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) and the Yucca Mountain Office of Repository Development (YMORD). Compliance with these requirements will ensure compliance with Title 10 Code of Federal Regulations Part 835 (10 CFR 835), Occupational Radiation Protection. Programs covered by this manual are located at the Nevada Test Site (NTS); Nellis Air Force Base and North Las Vegas, Nevada; Santa Barbara and Pleasanton, California; and at Andrews Air Force Base, Maryland. In addition, field work by NNSA/NSO at other locations is also covered by this manual.

  11. Hanford Waste Vitrification Plant technical manual

    SciTech Connect (OSTI)

    Larson, D.E.; Watrous, R.A.; Kruger, O.L.

    1996-03-01

    A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.

  12. Kraith Creator"s Manual Issue 1 

    E-Print Network [OSTI]

    Lichtenberg, Jacqueline; Multiple Contributors

    1973-01-01

    will be better balanced. It should not be difficult to place a contribution with the Kraith Creator's Manual. Letters that have passed between Kraith Creators during the roughing out of a story should be sent to Carol Lynn for editing. Background ideas... on stories you've written can be worked up into articles for the Manual, telling other Creators some of the things you had in mind but didn't get around to spelling out in the story. Story outlines or story ideas for Kraith stories that you would like...

  13. Physical Geology Laboratory Manual Charles Merguerian and J Bret Bennington

    E-Print Network [OSTI]

    Merguerian, Charles

    Physical Geology Laboratory Manual Charles Merguerian and J Bret Bennington Geology Department Hofstra University © 2006 #12;i PHYSICAL GEOLOGY LABORATORY MANUAL Ninth Edition Professors Charles Merguerian and J Bret Bennington Geology Department Hofstra University #12;ii ACKNOWLEDGEMENTS We thank

  14. Reimbursable Work for Non-Federal Sponsors Process Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-09-30

    This Manual provides detailed requirements to supplement DOE O 481.1. Does not cancel other directives.

  15. Training Manual for Micro, Small and Medium Entrepreneurs in...

    Open Energy Info (EERE)

    Interface: Website Website: www.gvepinternational.orgsitesdefaultfilesmanualforsmeenergyfi Cost: Free UN Region: Eastern Africa Language: English The training manual is...

  16. ECSI 322 Oceanography Laboratory -Manual 1 ESCI 322 -Oceanography Laboratory

    E-Print Network [OSTI]

    Shull, David H.

    ECSI 322 ­ Oceanography Laboratory - Manual 1 ESCI 322 - Oceanography Laboratory Laboratory Manual ­ Oceanography Laboratory - Manual 2 ESCI 322 - Introduction to Oceanography Laboratory Course Syllabus- 78-79 C+ 73-77 C 69-72C- 67-68 D+ 61-66 D 57-60 D- 0-56 F #12;ECSI 322 ­ Oceanography Laboratory

  17. TAMU Laboratory Safety Manual TEXAS A&M UNIVERSITY

    E-Print Network [OSTI]

    TAMU Laboratory Safety Manual i TEXAS A&M UNIVERSITY LABORATORY SAFETY MANUAL Prepared by ENVIRONMENTAL HEALTH & SAFETY TEXAS A&M UNIVERSITY FEBRUARY 2009 #12;TAMU Laboratory Safety Manual ii TABLE ..............................................................................................1-1 EHS LABORATORY SAFETY - PROGRAMS AND SERVICES ........................................1

  18. Nevada Test Site Radiological Control Manual

    SciTech Connect (OSTI)

    Radiological Control Managers' Council - Nevada Test Site

    2009-10-01

    This document supersedes DOE/NV/11718--079, “NV/YMP Radiological Control Manual,” Revision 5 issued in November 2004. Brief Description of Revision: A complete revision to reflect the recent changes in compliance requirements with 10 CFR 835, and for use as a reference document for Tenant Organization Radiological Protection Programs.

  19. Nevada Test Site Radiological Control Manual

    SciTech Connect (OSTI)

    Radiological Control Managers' Council Nevada Test Site

    2010-02-09

    This document supersedes DOE/NV/25946--801, “Nevada Test Site Radiological Control Manual,” Revision 0 issued in October 2009. Brief Description of Revision: A minor revision to correct oversights made during revision to incorporate the 10 CFR 835 Update; and for use as a reference document for Tenant Organization Radiological Protection Programs.

  20. NEW MEXICO STATE UNIVERSITY POLICY MANUAL

    E-Print Network [OSTI]

    Johnson, Eric E.

    NEW MEXICO STATE UNIVERSITY POLICY MANUAL As Modified by the Board of Regents 03.14.11 #12;TABLE...........................................................................................................................................................A-1 #12;Introduction and Mission Statement Introduction New Mexico State University was founded academic year, the college became known as the New Mexico College of Agriculture and Mechanic Arts

  1. NEW MEXICO STATE UNIVERSITY POLICY MANUAL

    E-Print Network [OSTI]

    Johnson, Eric E.

    NEW MEXICO STATE UNIVERSITY POLICY MANUAL As Modified by the Board of Regents 05.10.13 #12;TABLE..............................................................................................................................................................A #12;Introduction New Mexico State University was founded in 1888 as Las Cruces College as the New Mexico College of Agriculture and Mechanic Arts, the first degree granting institution

  2. State authorization manual. Volume 2. Appendices

    SciTech Connect (OSTI)

    Brugler-Jones, S.

    1990-10-01

    The document provides the supportive appendices for Volume 1 of the State Authorization Manual (SAM), which provides guidance for States applying for program revisions to their authorized RCRA State program. Among the appendices are: various program checklists, lists of revision checklists by cluster, model Federal Register Notices, guidance for State Authorization Files, and guidance for using Wordperfect files and for CFR files.

  3. Radiation Safety Manual Policies and Procedures

    E-Print Network [OSTI]

    Kavanagh, Karen L.

    - Notification of Nuclear Energy Worker Status 81 APPENDIX IX Liquid Scintillation Counting 82 APPENDIX X TO PROMOTE THE SAFE USE OF RADIOLOGICAL MATERIALS 7 III. TRAINING REQUIREMENTS 9 IV. AUTHORIZATION TO USE APPENDIX XIII ­ Procedures For Using The Nuclear Gauge 101 #12;Radiation Safety Manual ­ Table

  4. Safety Management Functions, Responsibilities, and Authorities Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-10-18

    This Manual is a mechanism for implementing the Department's guiding principles established in DOE P 450.4 and the safety management functions outlined in DOE P 411.1 Cancels DOE M 411.1-1. Canceled by DOE M 411.1-1B.

  5. Classified Matter Protection and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-04-17

    This Manual supplements DOE O 471.2A, Information Security Program, and provides detailed requirements for the protection and control of classified matter. Cancels DOE M 471.2-1B except Chapter III paragraphs 1 and 2, and Chapter IV.

  6. Security Controls for Unclassified Information Systems Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-05

    The Manual establishes minimum implementation standards for cyber security technical, management, and operational controls that will be followed in all information systems operated by DOE and the information systems. Admin Chg 1 dated 9-1-09. Canceled by DOE O 205.1B.

  7. Security Controls for Unclassified Information Systems Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-05

    The Manual establishes minimum implementation standards for cyber security technical, management, and operational controls that will be followed in all information systems operated by DOE and the information systems. Does not cancel other directives. Canceled by DOE O 205.1B

  8. Security Controls for Unclassified Information Systems Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-05

    The Manual establishes minimum implementation standards for cyber security technical, management, and operational controls that will be followed in all information systems operated by DOE and the information systems. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B.

  9. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-03-19

    This Manual supplements DOE O 231.1A and provides detailed requirements for implementing Department of Energy reporting requirements, including time schedules for reporting and data elements to be reported. Cancels DOE M 231.1-1, DOE N 231.1.

  10. Audit Manual release 3.0

    SciTech Connect (OSTI)

    Not Available

    1993-12-01

    This manual consolidates into one document the policies, procedures, standards, technical guidance and other techniques to be followed by the Assistant Inspector General for Audits and staff in planning and conducting audit work within DOE and in preparing related reports on behalf of the Office of Inspector General.

  11. Financial Policy Manual 2107 ACCOUNTING AUTHORITY & RESPONSIBILITY

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2107 ACCOUNTING AUTHORITY & RESPONSIBILITY Effective: December 1986: Research Services PURPOSE To assign authority and responsibility for the accounting for sponsored projects must be separately accounted for per the terms of the award An advance account may be established prior

  12. Financial Policy Manual 1103 ACCOUNTING SYSTEM MAINTENANCE

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 1103 ACCOUNTING SYSTEM MAINTENANCE Effective: December 1986 Revised Maintenance of BEN Financials (BEN), the financial accounting system is necessary to ensure financial accounting and reporting integrity. POLICY 1. Financial Systems is responsible for the maintenance of BEN. 2

  13. ISIS User Manual for Departmental, School and

    E-Print Network [OSTI]

    Shull, Kenneth R.

    ISIS User Manual for Departmental, School and University Administrator ISIS (pronounced -ss) is Northwestern University's Integrated Safety Information System. ISIS is the on-line web application by which PIs submit applications and registrations for review. ISIS also builds a laboratory's Safety Profile

  14. College of Science CLINICAL SCIENCE AREA MANUAL

    E-Print Network [OSTI]

    1 College of Science CLINICAL SCIENCE AREA MANUAL DEPARTMENT OF PSYCHOLOGY VIRIGINIA TECH AY2015 Training 24 B. Clinical Science Area Committee 25 C. Graduate Student Representatives 25 D. Advisor 26 E for Continuation on to the Preliminary Examination 49 F. Plan of Study: Doctoral Degree 51 G. The Preliminary

  15. TESC Farmhouse Biodiesel Project Processor Manual

    E-Print Network [OSTI]

    1 TESC Farmhouse Biodiesel Project Processor Manual #12;2 Thank you (in no particular order) to: David Rack, Sam Stout, and Kolby Bray-Hoagland for starting the Evergreen Biodiesel Project; our faculty Sara Keehfuss, Burke Anderson, Brodie Pettit (the Biodiesel Buccaneers) and Andrew York

  16. DOE Cooperative Research and Development Agreements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-12

    This Manual provides detailed requirements to supplement DOE O 483.1, DOE Cooperative Research and Development Agreements, dated 1-12-01, which establishes requirements for the performance of technology transfer through the use of Cooperative Research and Development Agreements (CRADAs). Canceled by DOE O 483.1A.

  17. Engineer Manual 1110-2-2607

    E-Print Network [OSTI]

    US Army Corps of Engineers

    DAMS Distribution Restriction Statement Approved for public release; distribution is unlimited. #12;EM of Navigation Dams ENGINEER MANUAL #12;AVAILABILITY Copies of this and other U.S. Army Corps of Engineers Corps of Engineers personnel should use Engineer Form 0-1687. UPDATES For a list of all U.S. Army Corps

  18. Engineer Manual 1110-2-1911

    E-Print Network [OSTI]

    US Army Corps of Engineers

    AND ROCK-FILL DAMS Distribution Restriction Statement Approved for public release; distribution Construction Control for Earth and Rock-Fill Dams ENGINEER MANUAL #12;AVAILABILITY Copies of this and other U For a list of all U.S. Army Corps of Engineers publications and their most recent publication dates, refer

  19. National Radiobiology Archives Distributed Access user's manual

    SciTech Connect (OSTI)

    Watson, C.; Smith, S. (Pacific Northwest Lab., Richland, WA (United States)); Prather, J. (Linfield Coll., McMinnville, OR (United States))

    1991-11-01

    This User's Manual describes installation and use of the National Radiobiology Archives (NRA) Distributed Access package. The package consists of a distributed subset of information representative of the NRA databases and database access software which provide an introduction to the scope and style of the NRA Information Systems.

  20. Financial Policy Manual 2111 UNALLOWABLE COSTS

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2111 UNALLOWABLE COSTS Effective: August 1998 Last Revision PURPOSE: To establish policy for the accounting of costs which are unallowable charges against federally sponsored projects. POLICY: 1. The following costs are unallowable charges to sponsored projects as either

  1. Graduate Policy Manual Department of Geography

    E-Print Network [OSTI]

    1 Graduate Policy Manual Department of Geography Texas A&M University Introduction and Preface Mission Statement and Departmental Organization The mission of the Department of Geography at Texas A of the discipline of geography. In our service, we are committed to maintaining and enhancing the academic

  2. DOE explosives safety manual. Revision 7

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    This manual prescribes the Department of Energy (DOE) safety rules used to implement the DOE safety policy for operations involving explosives. This manual is applicable to all DOE facilities engaged in operations of development, manufacturing, handling, storage, transportation, processing, or testing of explosives, pyrotechnics and propellants, or assemblies containing these materials. The standards of this manual deal with the operations involving explosives, pyrotechnics and propellants, and the safe management of such operations. The design of all new explosives facilities shall conform to the requirements established in this manual and implemented in DOE 6430.1A, ``General Design Criteria Manual.`` It is not intended that existing physical facilities be changed arbitrarily to comply with these provisions, except as required by law. Existing facilities that do not comply with these standards may continue to be used for the balance of their functional life, as long as the current operation presents no significantly greater risk than that assumed when the facility was originally designed and it can be demonstrated clearly that a modification to bring the facility into compliance is not feasible. However, in the case of a major renovation, the facility must be brought into compliance with current standards. The standards are presented as either mandatory or advisory. Mandatory standards, denoted by the words ``shall,`` ``must,`` or ``will,`` are requirements that must be followed unless written authority for deviation is granted as an exemption by the DOE. Advisory standards denoted by ``should`` or ``may`` are standards that may be deviated from with a waiver granted by facility management.

  3. UM,CP Dive Manual Exam Page 1 Rev. 3/15/2012 Diving Safety Diving Manual Exam

    E-Print Network [OSTI]

    Boynton, Walter R.

    UM,CP Dive Manual Exam Page 1 Rev. 3/15/2012 Diving Safety ­ Diving Manual Exam 1. AAUS records of dives equipment inspection and testing records all of the above #12;UM,CP Dive Manual Exam Page 2 Rev. 3/15/2012 8. Before conducting any diving operation under the auspices of the UM,CP

  4. Radiological Emergency Response Health and Safety Manual

    SciTech Connect (OSTI)

    D. R. Bowman

    2001-05-01

    This manual was created to provide health and safety (H&S) guidance for emergency response operations. The manual is organized in sections that define each aspect of H and S Management for emergency responses. The sections are as follows: Responsibilities; Health Physics; Industrial Hygiene; Safety; Environmental Compliance; Medical; and Record Maintenance. Each section gives guidance on the types of training expected for managers and responders, safety processes and procedures to be followed when performing work, and what is expected of managers and participants. Also included are generic forms that will be used to facilitate or document activities during an emergency response. These ensure consistency in creating useful real-time and archival records and help to prevent the loss or omission of information.

  5. Project Records Information System (PRIS) user's manual

    SciTech Connect (OSTI)

    Smith, P.S.; Nations, J.A.; Short, R.D.

    1991-08-01

    The Projects Record Information System (PRIS) is an interactive system developed for the Information Services Division (ISD) of Martin Marietta Energy Systems, Inc., to perform indexing, maintenance, and retrieval of information about Engineering project record documents for which they are responsible. This PRIS User's Manual provides instruction on the use of this system. Section 2.0 of this manual presents an overview of PRIS, describing the system's purpose; the data that it handles, functions it performs; hardware, software, and access; and help and error functions. Section 3.0 describes the interactive menu-driven operation of PRIS. Appendixes A, B,C, and D contain the data dictionary, help screens, report descriptions, and a primary menu structure diagram, respectively.

  6. Revegetation manual for the environmental restoration contractor

    SciTech Connect (OSTI)

    McLendon, T.; Redente, E.F.

    1997-02-01

    The purpose of this manual is to provide guidance and general guidelines for the revegetation of remediation waste sites and other disturbed areas on the Hanford Site. Specific revegetation plans will be developed using guidance from this manual. Locations, resources, and funding will dictate the specific revegetation design at each disturbed area. Disturbances have occurred to some of the ecological communities of the Hanford Site. Many of these disturbances are the result of operations of the Hanford Site, including Comprehensive Environmental Response, Compensation, and Liability Act of 1980 waste sites on small portions of the Hanford Site. There were, however, extensive disturbances to the native vegetation prior to operations of the facility. These resulted from cultivation, grazing, fire, and the introduction of exotics. Revegetation planning must take into account these early disturbances, as well as the later ones.

  7. Demonstration and Validation Assets: User Manual Development

    SciTech Connect (OSTI)

    2008-06-30

    This report documents the development of a database-supported user manual for DEMVAL assets in the NSTI area of operations and focuses on providing comprehensive user information on DEMVAL assets serving businesses with national security technology applications in southern New Mexico. The DEMVAL asset program is being developed as part of the NSPP, funded by both Department of Energy (DOE) and NNSA. This report describes the development of a comprehensive user manual system for delivering indexed DEMVAL asset information to be used in marketing and visibility materials and to NSTI clients, prospective clients, stakeholders, and any person or organization seeking it. The data about area DEMVAL asset providers are organized in an SQL database with updateable application structure that optimizes ease of access and customizes search ability for the user.

  8. Transportable Xenon Laboratory (TXL-1) Operations Manual

    SciTech Connect (OSTI)

    Thompson, Robert C.; Stewart, Timothy L.; Willett, Jesse A.; Woods, Vincent T.

    2011-03-07

    The Transportable Xenon Laboratory Operations Manual is a guide to set up and shut down TXL, a fully contained laboratory made up of instruments to identify and measure concentrations of the radioactive isotopes of xenon by taking air samples and analyzing them. The TXL is housed in a standard-sized shipping container. TXL can be shipped to and function in any country in the world.

  9. Nevada National Security Site Radiological Control Manual

    SciTech Connect (OSTI)

    Radiological Control Managers’ Council

    2012-03-26

    This document supersedes DOE/NV/25946--801, 'Nevada Test Site Radiological Control Manual,' Revision 1 issued in February 2010. Brief Description of Revision: A complete revision to reflect a recent change in name for the NTS; changes in name for some tenant organizations; and to update references to current DOE policies, orders, and guidance documents. Article 237.2 was deleted. Appendix 3B was updated. Article 411.2 was modified. Article 422 was re-written to reflect the wording of DOE O 458.1. Article 431.6.d was modified. The glossary was updated. This manual contains the radiological control requirements to be used for all radiological activities conducted by programs under the purview of the U.S. Department of Energy (DOE) and the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO). Compliance with these requirements will ensure compliance with Title 10 Code of Federal Regulations (CFR) Part 835, 'Occupational Radiation Protection.' Programs covered by this manual are located at the Nevada National Security Site (NNSS); Nellis Air Force Base and North Las Vegas, Nevada; Santa Barbara and Livermore, California; and Andrews Air Force Base, Maryland. In addition, fieldwork by NNSA/NSO at other locations is covered by this manual. Current activities at NNSS include operating low-level radioactive and mixed waste disposal facilities for United States defense-generated waste, assembly and execution of subcritical experiments, assembly/disassembly of special experiments, the storage and use of special nuclear materials, performing criticality experiments, emergency responder training, surface cleanup and site characterization of contaminated land areas, environmental activity by the University system, and nonnuclear test operations, such as controlled spills of hazardous materials at the Hazardous Materials Spill Center. Currently, the major potential for occupational radiation exposure is associated with the burial of low-level radioactive waste and the handling of radioactive sources. Remediation of contaminated land areas may also result in radiological exposures.

  10. UMTRA Project document control system manual

    SciTech Connect (OSTI)

    Not Available

    1994-09-01

    This manual defines the Project Document Control System (PDCS) operated by the US DOE Uranium Mill tailings Remedial Action (UMTRA) project Office. The purpose of the PDCS is to provide an active and continuing program for acquiring, controlling, retaining, retrieving, retiring and disposing of all UMTRA Project documents. The PDCS also provides guidance and coordination in transferring documents by various UMTRA Projection document control centers to a central location.

  11. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-01-28

    This Manual provides detailed requirements to supplement DOE O 231.1, Environment, Safety and Health Reporting, which establishes management objectives and requirements for reporting environment, safety and health information. (Paragraphs 2a, 2a(1), 2a(2), 2b, 2b(1), 2b(2), and 2i(3)(a) through 2i(3)(d) of Chapter II, and Appendix A canceled by DOE N 231.1; Chapter IV canceled by DOE O 470.2A.)

  12. Environment, Safety and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-03-19

    This Manual supplements DOE O 231.1A and provides detailed requirement for implementing Department of Energy reporting requirements, including time schedules for reporting and data elements to be reported. The page change modifies policy previously established that requires recording and reporting occupational injuries and illnesses of subcontractors employees. Change 1 dated 9-9-04. Change 2 dated 6-12-07. Canceled by DOE O 231.1B

  13. Battery Calendar Life Estimator Manual Modeling and Simulation

    SciTech Connect (OSTI)

    Jon P. Christophersen; Ira Bloom; Ed Thomas; Vince Battaglia

    2012-10-01

    The Battery Life Estimator (BLE) Manual has been prepared to assist developers in their efforts to estimate the calendar life of advanced batteries for automotive applications. Testing requirements and procedures are defined by the various manuals previously published under the United States Advanced Battery Consortium (USABC). The purpose of this manual is to describe and standardize a method for estimating calendar life based on statistical models and degradation data acquired from typical USABC battery testing.

  14. Packaging and Transfer of Materials of National Security Interest Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-09-29

    The purpose of this Technical Manual is to establish requirements for operational safety controls for onsite operations. This Technical Manual provides Department of Energy (DOE) technical safety requirements and policy objectives for development of an onsite packaging and transfer program, pursuant to DOE O 461.1; the DOE contractor must document this program in its onsite packaging and transfer manual/procedures. Does not cancel other directives.

  15. PFLOTRAN User Manual: A Massively Parallel Reactive Flow and...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: PFLOTRAN User Manual: A Massively Parallel Reactive Flow and Transport Model for Describing Surface and Subsurface Processes Citation Details In-Document Search...

  16. PFLOTRAN User Manual: A Massively Parallel Reactive Flow and...

    Office of Scientific and Technical Information (OSTI)

    PFLOTRAN User Manual: A Massively Parallel Reactive Flow and Transport Model for Describing Surface and Subsurface Processes Lichtner, Peter OFM Research; Karra, Satish Los...

  17. Microfluidic Facility, Harvard Medical School UVO-42 Operation Manual

    E-Print Network [OSTI]

    Zhang, Yi

    Microfluidic Facility, Harvard Medical School UVO-42 Operation Manual 1. Load the substrate then be opened the tray removed, and the parts unloaded. Calixto Saenz, Microfluidic Facility

  18. Manual for Identifying and Protecting Official Use Only Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-04-09

    The manual provides detailed requirements to supplement DOE O 471.3. Admin Chg 1 dated 1-13-11. supersedes DOE M 471.3-1.

  19. Low-Level Waste Disposal Facility Federal Review Group Manual

    Office of Environmental Management (EM)

    Low- LEVEL WASTE DISPOSAL FACILITY FEDERAL REVIEW GROUP MANUAL REVISION 3 JUNE 2008 (This page intentionally left blank) Low-Level JVllsfe Disposal Fllcilil' Federal Review Group...

  20. Radiation Protection Instrument Manual, Revision 1, PNL-MA-562

    SciTech Connect (OSTI)

    Johnson, Michelle Lynn

    2009-09-23

    PNL-MA-562 This manual provides specific information for operating and using portable radiological monitoring instruments available for use on the Hanford Site.

  1. Adaptation to Climate Variability and Change: A Guidance Manual...

    Open Energy Info (EERE)

    Adaptation to Climate Variability and Change: A Guidance Manual for Development Planning Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Adaptation to Climate...

  2. BLM Manual 8270 - General Procedural Guidance for Paleontological...

    Open Energy Info (EERE)

    BLM Manual 8270 - General Procedural Guidance for Paleontological Resource Management Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory...

  3. Environmental Health and Safety -Safety Manual Table of Contents

    E-Print Network [OSTI]

    Li, X. Rong

    1 Environmental Health and Safety - Safety Manual Table of Contents I. Assignment of Responsibility Management Program..................................81 XIX. Water Vessel Safety Program

  4. WYDOT Access Manual | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEt Al.,Turin,Village of Wellington,FL97-11 SEPAStorageWWTP PowerAccess Manual

  5. UQTk version 2.0 user manual.

    SciTech Connect (OSTI)

    Debusschere, Bert J.; Sargsyan, Khachik; Safta, Cosmin

    2013-10-01

    The UQ Toolkit (UQTk) is a collection of libraries and tools for the quanti cation of uncer- tainty in numerical model predictions. Version 2.0 o ers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity anal- ysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

  6. K-edge densitometer (KED). User manual

    SciTech Connect (OSTI)

    Sprinkle, J.K.; Hansen, W.J.

    1993-02-11

    In 1979, a K-edge densitometer (KED) was installed by the Safeguards Assay group from Los Alamos National Laboratory in the PNC reprocessing plant at Tokai-mura, Japan. It uses an active nondestructive assay technique, KED, to measure the plutonium concentration of the product solution. The measurement uncertainty of an assay depends on the count time chosen, but can be 0.5% or better. The computer hardware and software were upgraded in 1992. This manual describes the operation of the instrument, with an emphasis on the user interface to the software.

  7. Classified Matter Protection and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-07-14

    This Manual supplements DOE O 471.2A, Information Security Program, dated 3-27-97, and provides detailed requirements for the protection and control of classified matter. Cancels DOE M 471.2-1B, dated 1-6-99, except Chapter III paragraphs 1 and 2 and Chapter IV. DOE M 471.2-1B Chapter IV was canceled by DOE O 471.4, Incidents of Security Concern, dated 3-17-04. Change 1, dated 7-14-2004, modifies requirements in Chapter II, paragraph 8c. Extended until 5-11-06 by DOE N 251.63, dated 5-11-05.

  8. Classified Matter Protection and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-01-06

    Provides detailed requirements for the protection and control of classified matter which supplement DOE O 471.2A. Extended until 5-11-06 by DOE N 251.63, dated 5-11-05. This manual has been canceled by DOE M 471.2-1C except Chapter III paragraphs 1 and 2, and Chapter IV. Chapter IV was canceled by DOE O 471.4, Incidents of Security Concern, dated 3/17/2004. Cancels DOE M 471.2-1A.

  9. Environment, Safety and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-09-09

    This Manual supplements DOE O 231.1A and provides detailed requirement for implementing Department of Energy reporting requirements, including time schedules for reporting and data elements to be reported. The Page Change clarifies responsibilities pertaining to occupational injury and illness recordkeeping and recording; requires quarterly reconciliation of occupational injury and illness data; and provides clarification on data elements that must be reported and reconciled with local data records. Cancels DOE M 231.1-1c1, DOE N 231.1. Chg 1, 9-9-04.

  10. Rooftop Unit Comparison Calculator User Manual

    SciTech Connect (OSTI)

    Miller, James D.

    2015-04-30

    This document serves as a user manual for the Packaged rooftop air conditioners and heat pump units comparison calculator (RTUCC) and is an aggregation of the calculator’s website documentation. Content ranges from new-user guide material like the “Quick Start” to the more technical/algorithmic descriptions of the “Methods Pages.” There is also a section listing all the context-help topics that support the features on the “Controls” page. The appendix has a discussion of the EnergyPlus runs that supported the development of the building-response models.

  11. User Manuals | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThin FilmUnited States: EnergyUpper Cumberland EUser Manuals Home

  12. DOE Manual - Advisory Committee Management Program

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i pStateDOE FederalThe Department of Energy this week launchedgoal,MANUAL

  13. Alternative Fuel Driver Training Companion Manual

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home Page onPropane Rolls onManual del vehĂ­culoU.S. Department

  14. Automated manual transmission mode selection controller

    DOE Patents [OSTI]

    Lawrie, Robert E. (Whitmore Lake, MI)

    1999-11-09

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  15. Automated manual transmission shift sequence controller

    DOE Patents [OSTI]

    Lawrie, Robert E. (Whitmore Lake, MI); Reed, Richard G. (Royal Oak, MI); Rausen, David J. (Denver, CO)

    2000-02-01

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both, an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  16. LASER SAFETY MANUAL University of Nevada, Las Vegas

    E-Print Network [OSTI]

    Walker, Lawrence R.

    LASER SAFETY MANUAL University of Nevada, Las Vegas Responsible Office: Office of Radiological (702) 895-4226 Revised February 2012 #12;PREFACE This Laser Safety Manual contains the policy, regulations, and procedures for the safe use of laser and certain other optical systems at the University

  17. ISI TechnicalManual ISI/TM-88-197

    E-Print Network [OSTI]

    Robins, Gabriel

    ISI TechnicalManual ISI/TM-88-197 February1988 University ofSouthern California Gabriel Robins %% ... ... .. The ISI Grapher Manual INFORMATION SCIENCES 213/822-1511 INSTITUTEJ f-"-676 292-t5466Admiralty Way. MONITORING ORGANIZATION REPORT NUMBER(S) ISI/TM-88-197 6a. NAME OF PERFORMING ORGANIZATION USC

  18. Radiological Control Manual Environment, Safety, Health, and Quality Division

    E-Print Network [OSTI]

    Wechsler, Risa H.

    ............................................................................................................................................8 128 Facility Modifications and Radiological Design ConsiderationsRadiological Control Manual Environment, Safety, Health, and Quality Division SLAC-I-720-0A05Z-001 and published by ESHQ Publishing Document Title: Radiological Control Manual Original Publication Date: 1

  19. November 2014 Laboratory Safety Manual Section 3 -Chemical Waste Management

    E-Print Network [OSTI]

    Brown, Sally

    November 2014 Laboratory Safety Manual Section 3 - Chemical Waste Management UW Environmental Health and Safety Page 3-1 Section 3 - Chemical Waste Management Contents A. HAZARDOUS CHEMICAL WASTE Section 3 - Chemical Waste Management Laboratory Safety Manual UW Environmental Health and Safety Page 3

  20. Identification and Protection of Unclassified Controlled Nuclear Information Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-30

    This Manual provides detailed requirements to supplement DOE O 471.1A, Identification and Protection of Unclassified Controlled Nuclear Information. Change 1, dated 10/23/01, was added to the Manual to clarify when and how encryption requirements for Unclassified Controlled Nuclear Information may be waived. Canceled by DOE O 471.1B.

  1. Power Module User's Manual 3/2/05 Commercial Confidential

    E-Print Network [OSTI]

    Wood, Stephen L.

    Standard litre per minute, measured at 1 atm, 0°C UPS Uninterrupted power supply V Volt VDC Voltage, DirectNexaTM Power Module User's Manual MAN5100078 3/2/05 Commercial Confidential NexaTMPower Module i NexaTM (310-0027) Power Module User's Manual 5,000,001 Series PBS Proprietary Notice

  2. Manual of Leaf Architecture Morphological description and categorization

    E-Print Network [OSTI]

    Wilf, Peter

    - 1 - Manual of Leaf Architecture Morphological description and categorization of dicotyledonous reserved. Published and distributed by: Leaf Architecture Working Group c/o Scott Wing Department-9677554-0-9 Please cite as: Manual of Leaf Architecture - morphological description and categorization

  3. Battery Test Manual For Plug-In Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Jeffrey R. Belt

    2010-12-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the procedures and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.

  4. Battery Test Manual For Plug-In Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Jeffrey R. Belt

    2010-09-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the procedures and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.

  5. MANUAL DE PROCEDIMIENTOS DEL DEPARTAMENTO DE BIOTECNOLOGIA Y BIOINGENIERIA. DISPOSICIONES GENERALES

    E-Print Network [OSTI]

    1 MANUAL DE PROCEDIMIENTOS DEL DEPARTAMENTO DE BIOTECNOLOGIA Y BIOINGENIERIA. DISPOSICIONES del Departamento (http://biotecnologia.cinvestav.mx) CAPITULO I 2.- Para los propósitos de este Manual

  6. Department of Energy Budget Execution Funds Distribution and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-01-09

    As a service to all Department of Energy (DOE) elements, including the National Nuclear Security Administration (NNSA), this Manual provides the user with a single source for references, definitions, and procedural requirements for distributing and controlling Department of Energy (DOE) funds. Accordingly, the Manual provides detailed requirements to supplement DOE O 135.1A, Budget Execution—Funds Distribution and Control, dated 1-9-06. Paragraph 5, of DOE O 135.1A defines organizational responsibilities pertinent to this Manual. Supersedes DOE M 135.1-1.

  7. Health and Safety Procedures Manual for hazardous waste sites

    SciTech Connect (OSTI)

    Thate, J.E.

    1992-09-01

    The Oak Ridge National Laboratory Chemical Assessments Team (ORNL/CAT) has developed this Health and Safety Procedures Manual for the guidance, instruction, and protection of ORNL/CAT personnel expected to be involved in hazardous waste site assessments and remedial actions. This manual addresses general and site-specific concerns for protecting personnel, the general public, and the environment from any possible hazardous exposures. The components of this manual include: medical surveillance, guidance for determination and monitoring of hazards, personnel and training requirements, protective clothing and equipment requirements, procedures for controlling work functions, procedures for handling emergency response situations, decontamination procedures for personnel and equipment, associated legal requirements, and safe drilling practices.

  8. Federal Radiological Monitoring and Assessment Center Health and Safety Manual

    SciTech Connect (OSTI)

    FRMAC Health and Safety Working Group

    2012-03-20

    This manual is a tool to provide information to all responders and emergency planners and is suggested as a starting point for all organizations that provide personnel/assets for radiological emergency response. It defines the safety requirements for the protection of all emergency responders. The intent is to comply with appropriate regulations or provide an equal level of protection when the situation makes it necessary to deviate. In the event a situation arises which is not addressed in the manual, an appropriate management-level expert will define alternate requirements based on the specifics of the emergency situation. This manual is not intended to pertain to the general public.

  9. TEXAS A&M UNIVERSITY LIBRARIES USING THE CHICAGO MANUAL OF STYLE (CMOS) FORMAT

    E-Print Network [OSTI]

    Liberia, 1833-1869. Lexington: University Press of Kentucky. #12;Using Chicago Manual of Style Format

  10. U.S. Department of Energy Travel Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-02-17

    The Manual supplements information in the Federal Travel Regulation (FTR) by providing further clarification and establishing Department of Energy (DOE) policy on matters that the FTR left to Agency discretion. Supersedes DOE M 552.1-1.

  11. February 2015 Radiation Safety Manual Section 7 ALARA Program

    E-Print Network [OSTI]

    Sniadecki, Nathan J.

    February 2015 Radiation Safety Manual Section 7 ­ ALARA Program UW Environmental Health and Safety Page 7-1 Section 7 ALARA Program Contents A. ALARA Principle-3 B. Radiation Safety Committee Commitment to ALARA................................................7

  12. Table Contents Page i 2013 Nonresidential Compliance Manual January 2014

    E-Print Network [OSTI]

    Table Contents Page i 2013 Nonresidential Compliance Manual January 2014 Table of Contents........................................................................5 Table F-1 Small Water Heater Test Methods ..................................................................................6 Table F-2 Large Water Heater Test Methods

  13. DOE Manual Studies 11 Major CO2 Geologic Storage Formations

    Broader source: Energy.gov [DOE]

    A comprehensive study of 11 geologic formations suitable for permanent underground carbon dioxide (CO2) storage is contained in a new manual issued by the U.S. Department of Energy.

  14. National Best Practices Manual for Building High Performance Schools

    SciTech Connect (OSTI)

    2007-10-01

    The Best Practices Manual was written as a part of the promotional effort for EnergySmart Schools, provided by the US Department of Energy, to educate school districts around the country about energy efficiency and renewable energy.

  15. Manual for Control And Accountability of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-08-11

    DOE M 474.1-1 prescribes Department of Energy (DOE) requirements and procedures for nuclear material control and accountability (MC&A). This Manual supplements DOE O 474.1, Control and Accountability of Nuclear Materials.

  16. Manual for Control and Accountability of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-11-22

    The manual prescribes requirements and procedures for nuclear material control and accountability (MC&A). Cancels DOE M 474.1-1. Canceled by DOE M 474.1-1B.

  17. Manual for Control and Accountability of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-06-13

    The manual prescribes requirements and assign responsibilities for nuclear material control and accountability. Cancels DOE M 474.1-1A. Canceled by DOE M 470.4-6.

  18. Job Application Portal Manual for the Job Application Portal

    E-Print Network [OSTI]

    Job Application Portal Manual for the Job Application Portal in the University of Gothenburg e Portal...................................................................... 3 Creating a new account.............................................................................................................................................. 10 #12;The University of Gothenburg 3/10 The University of Gothenburg's Job Application Portal

  19. Nano Research Facility Lab Safety Manual Nano Research Facility

    E-Print Network [OSTI]

    Subramanian, Venkat

    1 Nano Research Facility Lab Safety Manual Nano Research Facility: Weining Wang Office: Brauer---chemical, biological, or radiological. Notify the lab manager, Dr. Yujie Xiong at 5-4530. Eye Contact: Promptly flush

  20. Battery Technology Life Verification Test Manual Revision 1

    SciTech Connect (OSTI)

    Jon P. Christophersen

    2012-12-01

    The purpose of this Technology Life Verification Test (TLVT) Manual is to help guide developers in their effort to successfully commercialize advanced energy storage devices such as battery and ultracapacitor technologies. The experimental design and data analysis discussed herein are focused on automotive applications based on the United States Advanced Battery Consortium (USABC) electric vehicle, hybrid electric vehicle, and plug-in hybrid electric vehicle (EV, HEV, and PHEV, respectively) performance targets. However, the methodology can be equally applied to other applications as well. This manual supersedes the February 2005 version of the TLVT Manual (Reference 1). It includes criteria for statistically-based life test matrix designs as well as requirements for test data analysis and reporting. Calendar life modeling and estimation techniques, including a user’s guide to the corresponding software tool is now provided in the Battery Life Estimator (BLE) Manual (Reference 2).

  1. Nuclear Science References Coding Manual D.F. Winchell

    E-Print Network [OSTI]

    Ohta, Shigemi

    Nuclear Science References Coding Manual D.F. Winchell National Nuclear Data Center Brookhaven and coding procedures for specific topics . . 18 3.2.1 NUCLEAR REACTIONS . . . . . . . . . . . . . . . . 19 3.2.2 RADIOACTIVITY . . . . . . . . . . . . . . . . . . . . 20 3.2.3 NUCLEAR STRUCTURE

  2. STUDENT MANUAL SCHOOL OF CITY AND REGIONAL PLANNING

    E-Print Network [OSTI]

    Li, Mo

    STUDENT MANUAL SCHOOL OF CITY AND REGIONAL PLANNING COLLEGE OF ARCHITECTURE GEORGIA INSTITUTE OF TECHNOLOGY MASTER OF CITY AND REGIONAL PLANNING ........................................................................................... 1 III. CITY AND REGIONAL PLANNING FACULTY AND STAFF, 20132014

  3. Manual for Identifying and Protecting Official Use Only Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-04-09

    This Department of Energy (DOE) Manual provides detailed requirements to supplement DOE O 471.3, Identifying and Protecting Official Use Only Information, dated 4-9-03. Admin Chg dated 1-13-11.

  4. Sophos Anti-Virus for Windows, version 7 user manual

    E-Print Network [OSTI]

    Sophos Anti-Virus for Windows, version 7 user manual For Windows 2000 and later Document date: August 2008 #12;Contents 1 About Sophos Anti-Virus ........................................................................................................................3 2 Introduction to Sophos Anti-Virus

  5. Hydrogen Fuel Cell Engines and Related Technologies Course Manual...

    Broader source: Energy.gov (indexed) [DOE]

    Photo of hydrogen-powered bus. Produced by College of the Desert and SunLine Transit Agency with funding from the U.S. Federal Transit Administration, this course manual features...

  6. August 2004 Radiation Safety Manual Section 5 -Training

    E-Print Network [OSTI]

    Wilcock, William

    August 2004 Radiation Safety Manual Section 5 - Training UW Environmental Health and Safety Page 5-1 Section 5 Radiation Safety Training Contents A. Individuals Directly Using Radioactive Materials..........................................5-1 1. Regulations for Training.................................................................. 5

  7. Axiomatic design of a manually powered wheelchair lift mechanism

    E-Print Network [OSTI]

    DiGenova, Kevin (Kevin J.)

    2007-01-01

    The objective of this research is to create an inexpensive mechanism which gives wheelchair users the ability to adjust the vertical height of their chair while seated. There are currently 1.5 million manual wheelchair ...

  8. Identification and Protection of Unclassified Controlled Nuclear Information Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-30

    The Manual provides detailed requirements to supplement the Order. Extended by DOE N 251.58, dated 07/06/2004, until 06/30/2005. Canceled by: DOE O 471.B. Does not cancel other directives.

  9. National Solar Radiation Database 1991-2010 Update: User's Manual

    SciTech Connect (OSTI)

    Wilcox, S. M.

    2012-08-01

    This user's manual provides information on the updated 1991-2010 National Solar Radiation Database. Included are data format descriptions, data sources, production processes, and information about data uncertainty.

  10. Users Manual for TMY3 Data Sets (Revised)

    SciTech Connect (OSTI)

    Wilcox, S.; Marion, W.

    2008-05-01

    This users manual describes how to obtain and interpret the data in the Typical Meteorological Year version 3 (TMY3) data sets. These data sets are an update to the TMY2 data released by NREL in 1994.

  11. National Solar Radiation Database 1991-2005 Update: User's Manual

    SciTech Connect (OSTI)

    Wilcox, S.

    2007-04-01

    This manual describes how to obtain and interpret the data products from the updated 1991-2005 National Solar Radiation Database (NSRDB). This is an update of the original 1961-1990 NSRDB released in 1992.

  12. Course Library Manual Leon Osinski, TU/e Library

    E-Print Network [OSTI]

    Franssen, Michael

    Course Library Manual Leon Osinski, TU/e Library Version 2, January 2008 #12;2 Table of contents .........................................................................................................................3 1. Adding a Library Folder to a course instance......................................................................3 2. The Library Folder

  13. Forest Products Road Manual: A Handbook for Municipal Officials

    E-Print Network [OSTI]

    New Hampshire, University of

    Forest Products Road Manual: A Handbook for Municipal Officials and The Forest Products Industry: University of New Hampshire Cooperative Extension with support from: Sustainable Forestry Initiative N............................................................................................................................2 Road Access

  14. National Best Practices Manual for Building High Performance Schools

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Best Practices Manual was written as a part of the promotional effort for EnergySmart Schools, provided by the US Department of Energy, to educate school districts around the country about energy efficiency and renewable energy.

  15. Water Rights Analysis Package (WRAP) Modeling System Users Manual 

    E-Print Network [OSTI]

    Wurbs, Ralph A.

    2005-01-01

    System Users Manual by Ralph A. Wurbs Civil Engineering Department Texas A&M University TR-256 Texas Water Resources Institute College Station, Texas April 2005 Water Rights Analysis Package (WRAP) Modeling System Users Manual... The Texas A&M University System College Station, Texas 77843-2118 First Edition, August 2003 Second Edition, April 2005 Mention of a trademark or a proprietary product does not constitute a guarantee or a warranty of the product by the Texas...

  16. Load research manual. Volume 3. Load research for advanced technologies

    SciTech Connect (OSTI)

    Brandenburg, L.; Clarkson, G.; Grund, Jr., C.; Leo, J.; Asbury, J.; Brandon-Brown, F.; Derderian, H.; Mueller, R.; Swaroop, R.

    1980-11-01

    This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. The manual includes guides to load research literature and glossaries of load research and statistical terms. In Volume 3, special load research procedures are presented for solar, wind, and cogeneration technologies.

  17. Technical Manual for the SAM Biomass Power Generation Model

    SciTech Connect (OSTI)

    Jorgenson, J.; Gilman, P.; Dobos, A.

    2011-09-01

    This technical manual provides context for the implementation of the biomass electric power generation performance model in the National Renewable Energy Laboratory's (NREL's) System Advisor Model (SAM). Additionally, the report details the engineering and scientific principles behind the underlying calculations in the model. The framework established in this manual is designed to give users a complete understanding of behind-the-scenes calculations and the results generated.

  18. Tonopah Test Range capabilities: technical manual

    SciTech Connect (OSTI)

    Manhart, R.L.

    1982-11-01

    This manual describes Tonopah Test Range (TTR), defines its testing capabilities, and outlines the steps necessary to schedule tests on the Range. Operated by Sandia National Laboratories, TTR is a major test facility for DOE-funded weapon programs. The Range presents an integrated system for ballistic test vehicle tracking and data acquisition. Multiple radars, optical trackers, telemetry stations, a central computer complex, and combined landline/RF communications systems assure full Range coverage for any type of test. Range operations are conducted by a department within Sandia's Field Engineering Directorate. While the overall Range functions as a complete system, it is operationally divided into the Test Measurements, Instrumentation Development, and Range Operations divisions. The primary function of TTR is to support DOE weapons test activities. Management, however, encourages other Government agencies and their contractors to schedule tests on the Range which can make effective use of its capabilities. Information concerning Range use by organizations outside of DOE is presented. Range instrumentation and support facilities are described in detail. This equipment represents the current state-of-the-art and reflects a continuing commitment by TTR management to field the most effective tracking and data acquisition system available.

  19. HTGR Application Economic Model Users' Manual

    SciTech Connect (OSTI)

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooled Reactor (HTGR) Application Economic Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Application Economic Model calculates either the required selling price of power and/or heat for a given internal rate of return (IRR) or the IRR for power and/or heat being sold at the market price. The user can generate these economic results for a range of reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for up to 16 reactor modules; and for module ratings of 200, 350, or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Application Economic Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Application Economic Model. This model was designed for users who are familiar with the HTGR design and Excel and engineering economics. Modification of the HTGR Application Economic Model should only be performed by users familiar with the HTGR and its applications, Excel, and Visual Basic.

  20. EOSPAC user's manual: version 6.2

    SciTech Connect (OSTI)

    Pimentel, David A [Los Alamos National Laboratory

    2011-01-05

    The EOSPAC utility package is a collection of interface routines, which can be used to access the SESAME data library and perform various data adjustments and interpolations on the SESAME data. The SESAME data library contains both thermodynamic (e.g., equation of state) and transport coefficients (e.g., opacity and conductivity), and it is described in reference 1. Note, for simplicity, the term EOS (equation of state) used herein includes both thermodynamic variables and transport coefficients. The EOSPAC utility package is designed to be used by physics codes (henceforth 'host codes') written in multiple languages and on multiple platforms. The remainder of this manual is organized into several sections. Section 2 provides a general overview of basic theory and models implemented within EOSPAC. Section 3 provides a general overview of how to use the EOSPAC interface library. Section 4 discusses conventions such as data organization and routine names. Sections 5 through 7 describe the public interfaces of EOSPAC in detail. Section 8 provides details related to some selected numerical features of EOSPAC. Section 9 gives examples for using the interface routines described in sections 5 through 7. Section 10 provides technical support contact information. Section 11 contains a brief set of acknowledgments. Finally, section 12 contains a list of referenced documents. Appendices list the Table Type Definitions, the Option Flag Definitions, the Information Flag Definitions, and the Error Code Definitions.

  1. DATA MONITORING AND ANALYSIS PROGRAM MANUAL

    SciTech Connect (OSTI)

    Gravois, Melanie

    2007-07-06

    This procedure provides guidelines and techniques for analyzing and trending data using statistical methods for Lawrence Berkeley National Laboratory (LBNL). This procedure outlines the steps used in data analysis and trending. It includes guidelines for performing data analysis and for monitoring (or controlling) processes using performance indicators. This procedure is used when trending and analyzing item characteristics and reliability, process implementation, and other quality-related information to identify items, services, activities, and processes needing improvement, in accordance with 10 CFR Part 830, Subpart A, U.S. Department of Energy (DOE) Order 414.1C, and University of California (UC) Assurance Plan for LBNL. Trend codes, outlined in Attachment 4, are assigned to issues at the time of initiation and entry into the Corrective Action Tracking System (CATS) database in accordance with LBNL/PUB-5519 (1), Issues Management Program Manual. Throughout this procedure, the term performance is used to encompass all aspects of performance including quality, timeliness, efficiency, effectiveness, and reliability. Data analysis tools are appropriate whenever quantitative information describing the performance of an item, service, or process can be obtained.

  2. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2005-02-25

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database.

  3. US Fish and Wildlife Service lands biomonitoring operations manual

    SciTech Connect (OSTI)

    Rope, R.C.; Breckenridge, R.P.

    1993-08-01

    This is Volume 1 of an operations manual designed to facilitate the development of biomonitoring strategies for U.S. Fish and Wildlife Service Lands. It is one component of the U.S. Fish and Wildlife Service Lands Biomonitoring Operations Manual. The Volume contains the Introduction to the Manual, background information on monitoring, and procedures for developing a biomonitoring strategy for Service lands. The purpose of the Biomonitoring Operations Manual is to provide an approach to develop and implement biomonitoring activities to assess the status and trends of U.S. Fish and Wildlife Service trust resources. It also provides field sampline methods and documentation protocols for contaminant monitoring activities. The strategy described in the Manual has been designed as a stand alone process to characterize the presence of contaminants on lands managed by the Service. This process can be sued to develop a monitoring program for any tract of real estate with potential threats from on- or off-site contaminants. Because the process was designed to address concerns for Service lands that span the United States from Alaska to the Tropical Islands, it has a generic format that can be used in al types of ecosystems, however, significant site specific informtion is required to complete the Workbook and make the process work successfully.

  4. PETSc Users Manual Revision 3.5

    SciTech Connect (OSTI)

    Balay, S.; Abhyankar, S.; Adams, M.; Brown, J.; Brune, P.; Buschelman, K.; Eijkhout, V.; Gropp, W.; Kaushik, D.; Knepley, M.; McInnes, L. Curfman; Rupp, K.; Smith, B.; Zhang, H.

    2014-09-08

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself. ;For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because currently MATLAB is inherently not scalable; and PETSc should not be used to attempt to provide a “parallel linear solver” in an otherwise sequential code. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect any kind of reasonable performance. Do not expect to generate your matrix sequentially and then “use PETSc” to solve the linear system in parallel. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc is supported; see the web site http://www.mcs.anl.gov/petsc for information on contacting support. A http://www.mcs.anl.gov/petsc/publications may be found a list of publications and web sites that feature work involving PETSc. We welcome any reports of corrections for this document.

  5. PETSc Users Manual Revision 3.4

    SciTech Connect (OSTI)

    Balay, S.; Brown, J.; Buschelman, K.; Eijkhout, V.; Gropp, W.; Kaushik, D.; Knepley, M.; McInnes, L. Curfman; Smith, B.; Zhang, H.

    2014-06-29

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself; For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because currently MATLAB is inherently not scalable; and PETSc should not be used to attempt to provide a “parallel linear solver” in an otherwise sequential code. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect any kind of reasonable performance. Do not expect to generate your matrix sequentially and then “use PETSc” to solve the linear system in parallel. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc is supported; see the web site http://www.mcs.anl.gov/petsc for information on contacting support. A http://www.mcs.anl.gov/petsc/publications may be found a list of publications and web sites that feature work involving PETSc. We welcome any reports of corrections for this document.

  6. PETSc Users Manual Revision 3.3

    SciTech Connect (OSTI)

    Balay, S.; Brown, J.; Buschelman, K.; Eijkhout, V.; Gropp, W.; Kaushik, D.; Knepley, M.; McInnes, L. Curfman; Smith, B.; Zhang, H.

    2013-05-11

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself; For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because currently MATLAB is inherently not scalable; and PETSc should not be used to attempt to provide a “parallel linear solver” in an otherwise sequential code. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect any kind of reasonable performance. Do not expect to generate your matrix sequentially and then “use PETSc” to solve the linear system in parallel. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc is supported; see the web site http://www.mcs.anl.gov/petsc for information on contacting support. A http://www.mcs.anl.gov/petsc/publications may be found a list of publications and web sites that feature work involving PETSc. We welcome any reports of corrections for this document.

  7. Project design criteria manual: Upper Mechanicville Hydroelectric Redevelopment Project

    SciTech Connect (OSTI)

    None

    1980-12-01

    The design criteria presented in this manual are to be used as the bases for the detailed design for the Upper Mechanicville (NY) Hydroelectric Redevelopment Project. The manual refers to codes and standards which are to be used in the design of the project. Design approaches not covered by existing codes and standards are also given for all phases of the project. The manual is divided into six sections: civil design, hydraulic design, geotechnical design, electrical systems, mechanical systems, and major equipment. These design criteria are to be used as a guide for design. When changes become necessary, these shall be documented by the engineer responsible for the design. This documentation shall be sent to the Project Engineer and Project Manager for submission to the client for reference. The documentation shall specify the reason for the change and shall be routed to all Department Coordinators.

  8. Least-cost utility planning consumer participation manual

    SciTech Connect (OSTI)

    Mitchell, C.; Wellinghoff, J.; Goldberg, F.

    1989-01-01

    This manual is designed to provide guidance to state consumer advocates and other state consumer groups interested in either initiating and/or participating in an Least-Cost Utility Planning (LCUP) process in their state. Least cost utility planning examined primarily as a regulatory framework to be implemented by an appropriate state authority -- usually the public utility commission -- for the benefit of the state's citizens and electric utility customers. LCUP is also a planning process to be used by investor owned and public utilities to select, support and justify future expenditures in resource additions. This manual is designed as a How-To'' manual for implementing and participating in a statewide LCUP process. Its goal is to guide the reader through the LCUP maze so that meaningful, forward-looking, and cost minimizing electric utility planning can be initiated and sustained in your state.

  9. Least-cost utility planning consumer participation manual. [Final report

    SciTech Connect (OSTI)

    Mitchell, C.; Wellinghoff, J.; Goldberg, F.

    1989-12-31

    This manual is designed to provide guidance to state consumer advocates and other state consumer groups interested in either initiating and/or participating in an Least-Cost Utility Planning (LCUP) process in their state. Least cost utility planning examined primarily as a regulatory framework to be implemented by an appropriate state authority -- usually the public utility commission -- for the benefit of the state`s citizens and electric utility customers. LCUP is also a planning process to be used by investor owned and public utilities to select, support and justify future expenditures in resource additions. This manual is designed as a ``How-To`` manual for implementing and participating in a statewide LCUP process. Its goal is to guide the reader through the LCUP maze so that meaningful, forward-looking, and cost minimizing electric utility planning can be initiated and sustained in your state.

  10. DEVELOPMENT OF A HIGH EFFICIENCY, AUTOMATIC DEFROSTING REFRIGERATOR-FREEZER

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    and W. David Lee Arthur D. Little, Inc. Abstract This paper describes the development of an energy in the design phase, a computer model was developed by Arthur D. Little, Inc. to simulate the cabinet Refrigeration, Inc., and Arthur D. Little, Inc. In combination, these seven design options were estimated

  11. Self-defrosting recuperative air-to-air heat exchanger

    DOE Patents [OSTI]

    Drake, R.L.

    1993-12-28

    A heat exchanger is described which includes a stationary spirally or concentrically wound heat exchanger core with rotating baffles on upper and lower ends thereof. The rotating baffles include rotating inlets and outlets which are in communication with respective fixed inlets and outlets via annuli. The rotation of the baffles causes a concurrent rotation of the temperature distribution within the stationary exchanger core, thereby preventing frost build-up in some applications and preventing the formation of hot spots in other applications. 3 figures.

  12. Self-defrosting recuperative air-to-air heat exchanger

    DOE Patents [OSTI]

    Drake, Richard L. (Delmar, NY)

    1993-01-01

    A heat exchanger includes a stationary spirally or concentrically wound heat exchanger core with rotating baffles on upper and lower ends thereof. The rotating baffles include rotating inlets and outlets which are in communication with respective fixed inlets and outlets via annuli. The rotation of the baffles causes a concurrent rotation of the temperature distribution within the stationary exchanger core, thereby preventing frost build-up in some applications and preventing the formation of hot spots in other applications.

  13. Refrigerator-Freezers (multiple defrost waiver) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo. 195 - Oct. 7,DOERTI |Service ofConditioning1:

  14. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2009-08-28

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document.

  15. WIPP waste characterization program sampling and analysis guidance manual

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    The Waste Isolation Pilot Plant (WIPP) Waste Characterization Program Sampling and Analysis Guidance Manual (Guidance Manual) provides a unified source of information on the sampling and analytical techniques that enable Department of Energy (DOE) facilities to comply with the requirements established in the current revision of the Quality Assurance Program Plan (QAPP) for the WIPP Experimental-Waste Characterization Program (the Program). This Guidance Manual includes all of the sampling and testing methodologies accepted by the WIPP Project Office (DOE/WPO) for use in implementing the Program requirements specified in the QAPP. This includes methods for characterizing representative samples of transuranic (TRU) wastes at DOE generator sites with respect to the gas generation controlling variables defined in the WIPP bin-scale and alcove test plans, as well as waste container headspace gas sampling and analytical procedures to support waste characterization requirements under the WIPP test program and the Resource Conservation and Recovery Act (RCRA). The procedures in this Guidance Manual are comprehensive and detailed and are designed to provide the necessary guidance for the preparation of site specific procedures. The use of these procedures is intended to provide the necessary sensitivity, specificity, precision, and comparability of analyses and test results. The solutions to achieving specific program objectives will depend upon facility constraints, compliance with DOE Orders and DOE facilities' operating contractor requirements, and the knowledge and experience of the TRU waste handlers and analysts. With some analytical methods, such as gas chromatography/mass spectrometry, the Guidance Manual procedures may be used directly. With other methods, such as nondestructive/destructive characterization, the Guidance Manual provides guidance rather than a step-by-step procedure.

  16. RCRA (Resource Conservation and Recovery Act) inspection manual. Final report

    SciTech Connect (OSTI)

    Not Available

    1988-04-22

    The RCRA Inspection Manual is intended to assist RCRA field inspectors in their performance of Compliance Evaluation Inspections of RCRA generators, transporters, and treatment, storage, and disposal facilities. Included in the document are inspection procedures for both interim status and permitted facilities. The guidance also provides inspection checklists to aid the inspectors in their review of facility compliance. The Manual will assist RCRA inspectors and enforcement personnel to: conduct RCRA inspections efficiently and professionally, to determine facility compliance with RCRA regulations, adequately prepare for and conduct inspections at RCRA generators, transporters and TSD's, review facility permits for inspection of permitted facilities, and prepare quality inspection reports.

  17. Packaging and Transfer of Materials of National Security Interest Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-09-29

    This Technical Manual establishes requirements for operational safety controls for onsite operations and provides Department of Energy (DOE) technical safety requirements and policy objectives for development of an Onsite Packaging and Transfer Program, pursuant to DOE O 461.1A, Packaging and Transfer or Transportation of Materials of National Security Interest. The DOE contractor must document this program in its Onsite Packaging and Transfer Manual/Procedures. Admin Chg 1, 7-26-05. Certified 2-2-07. Canceled by DOE O 461.2.

  18. Provider-Level Manual Adaptation: Patterns, Predictors, and Impact on Child Outcomes 

    E-Print Network [OSTI]

    Osterberg, Leticia

    2010-07-14

    Manualized, evidence-based treatments (EBTs) for children are being increasingly incorporated in community mental health clinics. Yet, providers hold concerns about the appropriateness of manuals for community populations, as suggested...

  19. Augmented manual fabrication methods for 2D tool positioning and 3D sculpting

    E-Print Network [OSTI]

    Rivers, Alec (Alec Rothmyer)

    2013-01-01

    Augmented manual fabrication involves using digital technology to assist a user engaged in a manual fabrication task. Methods in this space aim to combine the abilities of a human operator, such as motion planning and ...

  20. Healthy Heart, Healthy Family A Community Health Worker's Manual for the Filipino Community

    E-Print Network [OSTI]

    Shen, Jun

    Healthy Heart, Healthy Family A Community Health Worker's Manual for the Filipino Community #12;NIH Publication No. 08-6339 September 2008 Healthy Heart, Healthy Family A Community Health Worker's Manual.......................................................................................................viii About the "Healthy Heart, Healthy Family" Manual................................................. xiv

  1. Marvell Nanolab Member login Lab Manual Index Mercury Web Berkeley Microlab Chapter 5.31

    E-Print Network [OSTI]

    Healy, Kevin Edward

    Win21 Rapid Thermal Processor ­ RTP1. 2.0 Purpose This manual describes the operating procedures for rtpMarvell Nanolab Member login Lab Manual Index Mercury Web Berkeley Microlab Chapter 5.31 AccuThermo 610 rtp is in the manual located on Mercury. 5.0 Definitions & Process Terminology 5.1 RTP: Rapid

  2. Haptic Guidance Improves the Visuo-Manual Tracking of Trajectories

    E-Print Network [OSTI]

    Payan, Yohan

    tasks. The effects of two types of haptic guidances-control in position (HGP) or in force (HGF)­on visuo: Three training techniques of haptic guidance (HGP, HGF or control condition, NHG, without haptic of the visuo-manual tracking of trajectories while no significant improvement was found for HGP or NHG

  3. ARES: automated response function code. Users manual. [HPGAM and LSQVM

    SciTech Connect (OSTI)

    Maung, T.; Reynolds, G.M.

    1981-06-01

    This ARES user's manual provides detailed instructions for a general understanding of the Automated Response Function Code and gives step by step instructions for using the complete code package on a HP-1000 system. This code is designed to calculate response functions of NaI gamma-ray detectors, with cylindrical or rectangular geometries.

  4. Table Contents Page i 2013 Nonresidential Compliance Manual June 2014

    E-Print Network [OSTI]

    Table Contents Page i 2013 Nonresidential Compliance Manual June 2014 Table of Contents 13.........................................................7 13.8 NRCA-MCH-09-A: Supply Water Temperature Reset Controls Acceptance ....................7 13: Condenser Water Supply Temperature Reset Controls Acceptance 8 13.17 NRCA-MCH-18-A: Energy Management

  5. Albert R. Mann Library Government Information Policy and Procedure Manual

    E-Print Network [OSTI]

    Angenent, Lars T.

    code, regulations, and serve as a primary source of statistical data. Government information acquiredAlbert R. Mann Library Government Information Policy and Procedure Manual Table of Contents and damaged information Acquisitions Acquisitions activities 1. Item selection profile 2. Shipment delivery 3

  6. Financial Policy Manual 2357 TRAVEL AND ENTERTAINMENT POLICY RENTAL CARS

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2357 ­ TRAVEL AND ENTERTAINMENT POLICY ­ RENTAL CARS Resp. Office/Revision: April 1, 2015 PURPOSE To provide travel guidelines regarding the use of rental cars when traveling on behalf of the University. SCOPE This policy applies to the procurement of rental cars by and for all

  7. LASER SAFETY MANUAL SOUTH DAKOTA SCHOOL OF MINES & TECHNOLOGY

    E-Print Network [OSTI]

    Anagnostou, Dimitris E.

    LASER SAFETY MANUAL SOUTH DAKOTA SCHOOL OF MINES & TECHNOLOGY Created: 06/15/07 Revision Date: 09/07/2007 FOR OFFICIAL USE ONLY #12;2 Table of Contents 1.0 SDSM&T Laser Safety Policy.................................................................................................3 2.1 Authorized Laser User

  8. The GIS Manual 1 The Integration of Internet GIS

    E-Print Network [OSTI]

    Tsou, Ming-Hsiang

    The GIS Manual 1 CHAPTER 48 The Integration of Internet GIS and Wireless Mobile GIS Ming, centralized GIS architecture, to an open, distributed geographic information services (GIServices) framework. With advances in computer networking and wireless communication technology, GIS is moving toward an integration

  9. HEWLETT-PACKARD ClubFitastic Energizer Manual-2013

    E-Print Network [OSTI]

    Gopalakrishnan, K.

    HEWLETT-PACKARD ClubFitastic Energizer Manual-2013 Pitt County Community Schools Introduction page 2 Energizer 1 page 3 Energizer 2 page 4 Energizer 3 page 5 Additional Resources pages 6 effort to produce a DVD with Energizers to support the ClubFitastic program which promotes a healthy

  10. Guidance manual for hazardous waste incinerator permits. Final report

    SciTech Connect (OSTI)

    Not Available

    1983-07-01

    The manual provides guidance to the permit writer for designating facility - specific operating conditions necessary to comply with the RCRA standards for hazardous waste incinerators. Each section of the incineration regulation is addressed, including: waste analysis, designation of principal organic hazardous constituents and requirements for operation, inspection and monitoring. Guidance is also provided for evaluating incinerator performance data and trial burn procedures.

  11. Sandia National Laboratories, California Environmental Management System program manual.

    SciTech Connect (OSTI)

    Larsen, Barbara L.

    2013-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 436.1.

  12. Sandia National Laboratories, California Environmental Management System program manual

    SciTech Connect (OSTI)

    Larsen, Barbara L.

    2014-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 436.1.

  13. 38 CHAPTER 1. ASSEMBLY MANUAL BiDirectional Motor

    E-Print Network [OSTI]

    38 CHAPTER 1. ASSEMBLY MANUAL Bi­Directional Motor and Infrared Beacon Uni­Directional Motor, LED to build reliable cables and connectors for the motors and sensors that will plug into the robot more reliable overall and will ease development difficulties. Sensors and motors are built

  14. Financial Policy Manual 1106.5 PLANT ASSETS PROPERTY MANAGEMENT

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 1106.5 PLANT ASSETS ­ PROPERTY MANAGEMENT Effective: December, 1986 PURPOSE To ensure proper management and control of fixed and moveable equipment. POLICY 1. All equipment of the University of Pennsylvania and is subject to University property management policies and procedures. 2

  15. SNL/CA Environmental Management System Program Manual.

    SciTech Connect (OSTI)

    Larsen, Barbara L.

    2005-09-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program was developed in accordance with Department of Energy (DOE) Order 450.1 and incorporates the elements of the International Standard on Environmental Management Systems, ISO 14001.

  16. NIH POLICY MANUAL 3015 -Admittance of Minors to Hazardous Areas

    E-Print Network [OSTI]

    Bandettini, Peter A.

    NIH POLICY MANUAL 3015 - Admittance of Minors to Hazardous Areas Issuing Office: OD/OM/ORS/DOHS 301 on admittance of minors to hazardous work areas that may contain inherently or potentially hazardous chemicals. Definitions: 1. Hazardous Area ­ Any area that poses an actual or potential risk of illness or injury

  17. NIH POLICY MANUAL 3034 -Working with Hazardous Materials

    E-Print Network [OSTI]

    Bandettini, Peter A.

    NIH POLICY MANUAL 3034 - Working with Hazardous Materials Issuing Office: ORS/DOHS (301) 496 and procedure governing work with hazardous chemicals as described in the NIH Hazard Communication Program page. A. Purpose: This chapter establishes the NIH policy for working with hazardous chemicals

  18. Surface moisture measurement system operation and maintenance manual

    SciTech Connect (OSTI)

    Vargo, G.F., Westinghouse Hanford

    1996-06-11

    The purpose of this manual is to provide detailed operating instructions for the Surface Moisture Measurement System (SMMS).In addition, operating instructions for the Liquid Observation Well Moisture Measurement System (LOWMMS) are included. These systems were developed primarily in support of Tank Waste Remediation System (TWRS) Safety Programs for moisture measurement in organic and ferrocyanide watch list tanks.

  19. Official Traditions Manual of the Saskatoon Engineering Students' Society Inc

    E-Print Network [OSTI]

    Saskatchewan, University of

    Official Traditions Manual of the Saskatoon Engineering Students' Society Inc Article I Definitions hereafter refer to "the Saskatoon Engineering Students' Society"; (c) "SESS" and "S.E.S.S." shall to "students in the College of Engineering at the U of S". Section 2 According to Policy 2.1 For all other

  20. STUDENT MANUAL SCHOOL OF CITY AND REGIONAL PLANNING

    E-Print Network [OSTI]

    Li, Mo

    STUDENT MANUAL SCHOOL OF CITY AND REGIONAL PLANNING COLLEGE OF ARCHITECTURE GEORGIA INSTITUTE OF TECHNOLOGY MASTER OF CITY AND REGIONAL PLANNING DEGREE Academic Year 2014-2015 #12;Contents I. INTRODUCTION..............................................................................................1 III. CITY AND REGIONAL PLANNING FACULTY AND STAFF, 2013

  1. Revised 1/31/12 BIOLOGICAL SAFETY MANUAL

    E-Print Network [OSTI]

    Gopalakrishnan, K.

    Sciences Building Room-188 (252) 744-2070 2012 #12;2 #12;3 TABLE OF CONTENTS Chp. 1 ADMINISTRATION 6 Scope Biohazard Definition and Purpose of this Manual 6 6 Organization/Authority 7 Responsibilities 8 Chp. 2 Culture Systems 27 Oncogenic Agents 28 Specific Viruses/Viral Vectors: 28 Adenovirus 28 Lentivirus 31 Chp

  2. 6023E/6024E/6025E User Manual

    E-Print Network [OSTI]

    Oh, Paul

    DAQ 6023E/6024E/6025E User Manual Multifunction I/O Devices for PCI, PXI , CompactPCI, and PCMCIA rights reserved. #12;Important Information Warranty The DAQCard-6024E, PCI-6023E, PCI-6024E, PCI-6025E

  3. PCI E Series Register-Level Programmer Manual

    E-Print Network [OSTI]

    Oh, Paul

    DAQ PCI E Series Register-Level Programmer Manual Multifunction I/O Boards for PCI Bus Computers PCI E Series RLPM November 1998 Edition Part Number 341079B-01 #12;Internet Support E-mail: support;Important Information Warranty The PCI E Series boards are warranted against defects in materials

  4. Financial Policy Manual 2137 REVISED FINAL FINANCIAL REPORTS

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2137 REVISED FINAL FINANCIAL REPORTS Effective: November 2003 Last Services PURPOSE: To ensure that the revised final financial reports are submitted so as to mitigate any of revised final financial reports is generally discouraged but may be necessary in cases that benefit

  5. Financial Policy Manual 2126 INTERIM & FINAL FINANCIAL REPORTS

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2126 INTERIM & FINAL FINANCIAL REPORTS Effective: Dec. 1986 Last the timely submission of financial reports of expenditures. POLICY 1. Research Services is responsible for the preparation and submission of interim and final financial reports required under sponsored project agreements

  6. College of Charleston Policy # 3 Infonnation Technology General Policy Manual

    E-Print Network [OSTI]

    Kunkle, Tom

    College of Charleston Policy # 3 Infonnation Technology General Policy Manual Standards for Desktop Standards 1.0 PURPOSE The purpose of this policy is to establish standards for desktop computing software for operating systems, applications, online tools, utilities, hardware vendors, and hardware technical

  7. How to use Solvent Purification System A brief manual

    E-Print Network [OSTI]

    d'Alarcao, Marc

    1 How to use Solvent Purification System A brief manual By V. Azev. SPS (Figure 1) can be used to collect dry oxygen free solvents into two different types of containers. One of them is a syringe. Syringes are filled with a solvent in a usual manner using a septum port on the flask (Figure 2

  8. Financial Policy Manual 2231 GIFTS OF REAL ESTATE

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2231 GIFTS OF REAL ESTATE Effective: March, 2010 Revised: Last-effective review of proposed gifts of real estate interests to the University of Pennsylvania. POLICY The University will review all proposed gifts of real estate interests submitted by a Development Officer

  9. PREPARING YOUR THESIS A MANUAL FOR GRADUATE STUDENTS

    E-Print Network [OSTI]

    Cantlon, Jessica F.

    PREPARING YOUR THESIS A MANUAL FOR GRADUATE STUDENTS UNIVERSITY OF ROCHESTER ROCHESTER, NEW YORK.275.9093 #12;Table of Contents Introduction 1 The PhD Thesis Registration Process 1 Formatting Your Thesis 2 The Order of Thesis Contents 4 Preparing for Dissertation Submission to ProQuest®/UMI 7 Plan Ahead

  10. Financial Policy Manual 2139 FACULTY SUMMER EFFORT & SALARY

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2139 FACULTY SUMMER EFFORT & SALARY Subject: SPONSORED PROJECTS during the months of June, July and/or August. POLICY: 1. Effort devoted and corresponding salary received must be in accordance with sponsor and University policy. 2. Faculty receiving full summer salary

  11. Financial Policy Manual 2406 SALARY AND WAGE PAYMENTS

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2406 SALARY AND WAGE PAYMENTS Effective: December 1986 Revised: May the circumstances under which the Comptroller will make salary and wage payments and to identify the methods for ensuring that salary or wage payments made to an employee are in accordance with existing human resource

  12. Financial Policy Manual 2411 NOTIFICATION OF EMPLOYEE TERMINATION

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2411 NOTIFICATION OF EMPLOYEE TERMINATION Effective: December 1986 To establish policy regarding the timely processing of the termination notice to the Payroll Department is required for effecting an employee's termination. Terminating the current pay distribution does

  13. September 2013 Laboratory Safety Manual Section 7 -Safety Training

    E-Print Network [OSTI]

    Wilcock, William

    September 2013 Laboratory Safety Manual Section 7 - Safety Training UW Environmental Health and Safety Page 7-1 Section 7 - Safety Training Contents A. SAFETY TRAINING REQUIREMENTS ......................................................7-1 B. EH&S SAFETY TRAINING AND RECORDS ..............................................7-1 C

  14. Financial Policy Manual 1102 GENERAL ACCOUNTING POLICY -FINANCIAL RESOURCES

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 1102 GENERAL ACCOUNTING POLICY - FINANCIAL RESOURCES Effective: Comptroller PURPOSE The primary purpose of the accounting system is to account for resources in accordance Financials (BEN), the financial accounting system, will be maintained in accordance with the principles

  15. The JETSPIN User Manual (Version 1.20)

    E-Print Network [OSTI]

    Marco Lauricella; Giuseppe Pontrelli; Ivan Coluzza; Dario Pisignano; Sauro Succi

    2015-07-23

    JETSPIN is an open-source computer program specifically designed to simulate the electrospinning process of nanofibers. This manual provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability. The code is designed to exploit different computational architectures, from single to parallel processor workstations.

  16. Financial Policy Manual 2351 TRAVEL AND ENTERTAINMENT POLICY OVERVIEW

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2351 ­ TRAVEL AND ENTERTAINMENT POLICY ­ OVERVIEW Resp. Office/Revision: April 1, 2015 PURPOSE To provide a policy overview for the purchase and payment/reimbursement of travel and entertainment on behalf of the University. SCOPE This policy applies to all affiliates (faculty, staff, students

  17. Financial Policy Manual 2360 TRAVEL AND ENTERTAINMENT POLICY TELEPHONE USAGE

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2360 ­ TRAVEL AND ENTERTAINMENT POLICY ­ TELEPHONE USAGE Resp expenses incurred when traveling on behalf of the University. SCOPE This policy applies responsibilities of the employee, student or postdoc can be found in Policy #2352. RESPONSIBILITY OF APPROVERS

  18. A User Manual Utah's Leading Advocate For Quality Rental Housing

    E-Print Network [OSTI]

    Hart, Gus

    A User Manual Utah's Leading Advocate For Quality Rental Housing 448 East 6400 South Suite 460 Murray , Utah 84107 801-506-0204 Fax 801-484-8649 www.uaahq.org #12;#12;Without quality rental housing professionals and apartment builders who operate rental housing statewide. We want to make sure your experience

  19. INVESTIGATOR'S MANUAL FOR THE CONNECTICUT MMUCC V4 CRASH REPORT

    E-Print Network [OSTI]

    Chandy, John A.

    INVESTIGATOR'S MANUAL FOR THE CONNECTICUT MMUCC V4 CRASH REPORT CONNECTICUT DEPARTMENT by contacting the Crash Data and Analysis Section of the Connecticut Department of Transportation at (860) 594-2095. Completed Reports Per Chapter 246 Section 14-108a of the Connecticut General Statutes, copies of completed

  20. November 2014 Laboratory Safety Manual Appendix B -Glossary

    E-Print Network [OSTI]

    Brown, Sally

    Appendix B - Glossary Laboratory Safety Manual UW Environmental Health and Safety ANSI American National and public needs for national consensus standards and coordinates development of such standards. Many ANSI, etc. (ANSI, 1819 L Street NW, Suite 600, Washington DC 20036, 202-293-8020, http://www.ansi

  1. The Weatherization Assistant User's Manual (Version 8.9)

    SciTech Connect (OSTI)

    Gettings, Michael B.; Malhotra, Mini; Ternes, Mark P.

    2015-01-01

    The Weatherization Assistant is a Windows-based energy audit software tool that was developed by Oak Ridge National Laboratory (ORNL) to help states and their local weatherization agencies implement the U.S. Department of Energy (DOE) Weatherization Assistance Program. The Weatherization Assistant is an umbrella program for two individual energy audits or measure selection programs: the National Energy Audit Tool (NEAT) for site-built single-family homes and the Manufactured Home Energy Audit (MHEA) for mobile homes. The Weatherization Assistant User's Manual documents the operation of the user interface for Version 8.9 of the software. This includes how to install and setup the software, navigate through the program, and initiate an energy audit. All of the user interface forms associated with the software and the data fields on these forms are described in detail. The manual is intended to be a training manual for new users of the Weatherization Assistant and as a reference manual for experienced users.

  2. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2011-04-04

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the manual by PNNL was discontinued beginning with Revision 0.2.

  3. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2010-04-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the manual by PNNL was discontinued beginning with Revision 0.2.

  4. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2007-03-12

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Minor revision. Updated Chapters 5, 6 and 9 to reflect change in default ring calibration factor used in HEDP dose calculation software. Factor changed from 1.5 to 2.0 beginning January 1, 2007. Pages on which changes were made are as follows: 5.23, 5.69, 5.78, 5.80, 5.82, 6.3, 6.5, 6.29, 9.2.

  5. Federal-facilities Hazardous-Waste Compliance Manual. Final report

    SciTech Connect (OSTI)

    Not Available

    1990-01-09

    In the continuing effort to achieve a higher level of compliance with the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) at Federal facilities, the Federal Facilities Hazardous Waste Compliance Office (FFHWCO) has developed the Federal Facilities Hazardous Waste Compliance Manual. The manual includes an overview of the Federal-facilities hazardous-waste compliance program, relevant statutory authorities, model provisions for Federal facility agreements, enforcement and other applicable guidance, Federal facilities docket and NPL listings, data-management information, selected DOD and DOE program guidance, and organization charts and contacts. This compendium is intended to be used as a reference by Regional RCRA and CERCLA enforcement personnel and Regional Counsels, particularly as an orientation guide for new Federal facilities staff.

  6. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2010-01-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the manual by PNNL was discontinued beginning with Revision 0.2. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Updated Chapters 5, 6 and 9 to reflect change in default ring calibration factor used in HEDP dose calculation software. Factor changed from 1.5 to 2.0 beginning January 1, 2007. Pages on which changes were made are as follows: 5.23, 5.69, 5.78, 5.80, 5.82, 6.3, 6.5, 6.29, and 9.2. Rev 0.2 (8/28/2009) Updated Chapters 3, 5, 6, 8 and 9. Chapters 6 and 8 were significantly expanded. References in the Preface and Chapters 1, 2, 4, and 7 were updated to reflect updates to DOE documents. Approved by HPDAC on 6/2/2009. Rev 1.0 (1/1/2010) Major revision. Updated all chapters to reflect the Hanford site wide implementation on January 1, 2010 of new DOE requirements for occupational radiation protection. The new requirements are given in the June 8, 2007 amendment to 10 CFR 835 Occupational Radiation Protection (Federal Register, June 8, 2007. Title 10 Part 835. U.S., Code of Federal Regulations, Vol. 72, No. 110, 31904-31941). Revision 1.0 to the manual replaces ICRP 26 dosimetry concepts and terminology with ICRP 60 dosimetry concepts and terminology and replaces external dose conversion factors from ICRP 51 with those from ICRP 74 for use in measurement of operational quantities with dosimeters. Descriptions of dose algorithms and dosimeter response characteristics, and field performance were updated to reflect changes in the neutron quality factors used in the measurement of operational quantities.

  7. Load research manual. Volume 1. Load research procedures

    SciTech Connect (OSTI)

    Brandenburg, L.; Clarkson, G.; Grund, Jr., C.; Leo, J.; Asbury, J.; Brandon-Brown, F.; Derderian, H.; Mueller, R.; Swaroop, R.

    1980-11-01

    This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. In Volumes 1 and 2, procedures are suggested for determining data requirements for load research, establishing the size and customer composition of a load survey sample, selecting and using equipment to record customer electricity usage, processing data tapes from the recording equipment, and analyzing the data. Statistical techniques used in customer sampling are discussed in detail. The costs of load research also are estimated, and ongoing load research programs at three utilities are described. The manual includes guides to load research literature and glossaries of load research and statistical terms.

  8. A manual of recommended practices for hydrogen energy systems

    SciTech Connect (OSTI)

    Hoagland, W.; Leach, S.

    1997-12-31

    Technologies for the production, distribution, and use of hydrogen are rapidly maturing and the number and size of demonstration programs designed to showcase emerging hydrogen energy systems is expanding. The success of these programs is key to hydrogen commercialization. Currently there is no comprehensive set of widely-accepted codes or standards covering the installation and operation of hydrogen energy systems. This lack of codes or standards is a major obstacle to future hydrogen demonstrations in obtaining the requisite licenses, permits, insurance, and public acceptance. In a project begun in late 1996 to address this problem, W. Hoagland and Associates has been developing a Manual of Recommended Practices for Hydrogen Systems intended to serve as an interim document for the design and operation of hydrogen demonstration projects. It will also serve as a starting point for some of the needed standard-setting processes. The Manual will include design guidelines for hydrogen procedures, case studies of experience at existing hydrogen demonstration projects, a bibliography of information sources, and a compilation of suppliers of hydrogen equipment and hardware. Following extensive professional review, final publication will occur later in 1997. The primary goal is to develop a draft document in the shortest possible time frame. To accomplish this, the input and guidance of technology developers, industrial organizations, government R and D and regulatory organizations and others will be sought to define the organization and content of the draft Manual, gather and evaluate available information, develop a draft document, coordinate reviews and revisions, and develop recommendations for publication, distribution, and update of the final document. The workshop, Development of a Manual of Recommended Practices for Hydrogen Energy Systems, conducted on March 11, 1997 in Alexandria, Virginia, was a first step.

  9. Transportation Routing Analysis Geographic Information System (TRAGIS) User's Manual

    SciTech Connect (OSTI)

    Johnson, PE

    2003-09-18

    The Transportation Routing Analysis Geographic Information System (TRAGIS) model is used to calculate highway, rail, or waterway routes within the United States. TRAGIS is a client-server application with the user interface and map data files residing on the user's personal computer and the routing engine and network data files on a network server. The user's manual provides documentation on installation and the use of the many features of the model.

  10. RCRA (Resource Conservation and Recovery Act) final authorization guidance manual

    SciTech Connect (OSTI)

    Not Available

    1983-06-10

    The document provides guidance regarding final authorization of State Hazardous Waste programs for the pre-HSWA RCRA program. The manual establishes a process and schedule for State Authorization applications, and provides detailed guidance on what State programs must contain in order to qualify for final authorization. The primary audience is U.S. EPA Headquarters and Regional offices and also State agencies, but public requests have also been received so they are included in that broad audience.

  11. SNL/CA Environmental Management System Program Manual.

    SciTech Connect (OSTI)

    Larsen, Barbara L.

    2007-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004. Elements of the ISO standard overlap with those of Department of Energy (DOE) Order 450.1, thus SNL/CA's EMS program also meets the DOE requirements.

  12. Reimbursable Work For Non-Federal Sponsors Process Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-03

    This Manual provides detailed requirements to supplement DOE O 481.1A, Work for Others (Non-DOE Funded Work), dated 01-03-01, which establishes requirements for the performance of work for non-Department of Energy (DOE) National Nuclear Security Administration (NNSA) entities by DOE/NNSA/contractor personnel and/or the use of DOE facilities that is not directly funded by DOE/NNSA appropriations. (Cancels DOE M 481.1-1).

  13. Architecture earth-sheltered buildings. Design manual 1. 4

    SciTech Connect (OSTI)

    Not Available

    1984-03-01

    Design guidance is presented for use by experienced engineers and architects. The types of buildings within the scope of this manual include slab-on-grade, partially-buried (bermed) or fully-buried, and large (single-story or multistory) structures. New criteria unique to earth-sheltered design are included for the following disciplines: Planning, Landscape Design, Life-Cycle Analysis, Architectural, Structural, Mechanical (criteria include below-grade heat flux calculation procedures), and Electrical.

  14. Manual for Protection and Control of Safeguards and Security Interests

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-04-10

    This Manual provides detailed requirements to supplement DOE O 5632.1C, which establishes policy for the protection and control of special nuclear material, Vital Equipment, classified matter, Departmental property and facilities, and unclassifed irradiated reactor fuel in transit. Chapter XI canceled by DOE O 470.1. Chapter III, paragraphs 1, 2, and 4 through 9 canceled by DOE O 471.2. DOE M 473.1-1 cancels the rest of this directive.

  15. User's Manual for RESRAD-OFFSITE Version 2.

    SciTech Connect (OSTI)

    Yu, C.; Gnanapragasam, E.; Biwer, B. M.; Kamboj, S.; Cheng, J. -J.; Klett, T.; LePoire, D.; Zielen, A. J.; Chen, S. Y.; Williams, W. A.; Wallo, A.; Domotor, S.; Mo, T.; Schwartzman, A.; Environmental Science Division; DOE; NRC

    2007-09-05

    The RESRAD-OFFSITE code is an extension of the RESRAD (onsite) code, which has been widely used for calculating doses and risks from exposure to radioactively contaminated soils. The development of RESRAD-OFFSITE started more than 10 years ago, but new models and methodologies have been developed, tested, and incorporated since then. Some of the new models have been benchmarked against other independently developed (international) models. The databases used have also expanded to include all the radionuclides (more than 830) contained in the International Commission on Radiological Protection (ICRP) 38 database. This manual provides detailed information on the design and application of the RESRAD-OFFSITE code. It describes in detail the new models used in the code, such as the three-dimensional dispersion groundwater flow and radionuclide transport model, the Gaussian plume model for atmospheric dispersion, and the deposition model used to estimate the accumulation of radionuclides in offsite locations and in foods. Potential exposure pathways and exposure scenarios that can be modeled by the RESRAD-OFFSITE code are also discussed. A user's guide is included in Appendix A of this manual. The default parameter values and parameter distributions are presented in Appendix B, along with a discussion on the statistical distributions for probabilistic analysis. A detailed discussion on how to reduce run time, especially when conducting probabilistic (uncertainty) analysis, is presented in Appendix C of this manual.

  16. The CAST Manual John Yen*, Thomas R. Ioerger^, Michael S. Miller^, Shuang Sun*,

    E-Print Network [OSTI]

    The CAST Manual John Yen*, Thomas R. Ioerger^, Michael S. Miller^, Shuang Sun*, Kaivan Kamali................................................................................................................. 4 3. About CAST ........................................................................................................... 6 3.3. CAST architecture

  17. Table of Contents Page i 2013 Residential Compliance Manual January 2014

    E-Print Network [OSTI]

    Table of Contents Page i 2013 Residential Compliance Manual January 2014 Table of Contents 5. Water Heating Requirements ................................................................................................................................1 5.1.1 Water Heating Energy

  18. Civil Defence Manual of Basic Training volume II: Basic methods of protection against high explosive missiles 

    E-Print Network [OSTI]

    Anonymous

    1949-01-01

    H0ME OFFICE CIVIL DEFENCE Manual of Basic Training VOLUME II BASIC METHODS OF PROTECTION AGAINST HIGH EXPLOSIVE MISSILES PAMPHLET No 5

  19. Fact #850: December 8, 2014 Automatic Transmissions have closed the Fuel Economy Gap with Manual Transmissions

    Broader source: Energy.gov [DOE]

    Historically, manual transmissions have delivered better fuel economy than automatic transmissions. However, improvements in the efficiency of automatic transmissions have closed that gap in recent...

  20. 21 2008, 12:00, Idle Gear Rattle in Manual Automotive Transmissions

    E-Print Network [OSTI]

    Psarrakos, Panayiotis

    21 2008, 12:00, , (). Idle Gear Rattle in Manual Automotive Transmissions) phenomena in Automotive Powertrain Systems, dynamic analysis of medical devices and virtual prototype

  1. 25 People x 4 Days + 1 Manual = Team Belgium’s E-Cube

    Broader source: Energy.gov [DOE]

    No, it's not an Ikea manual; it's the instructions for how to construct Team Belgium's "E-Cube" home for the 2011 Solar Decathlon.

  2. Manual of analytical methods for the Industrial Hygiene Chemistry Laboratory

    SciTech Connect (OSTI)

    Greulich, K.A.; Gray, C.E. (comp.)

    1991-08-01

    This Manual is compiled from techniques used in the Industrial Hygiene Chemistry Laboratory of Sandia National Laboratories in Albuquerque, New Mexico. The procedures are similar to those used in other laboratories devoted to industrial hygiene practices. Some of the methods are standard; some, modified to suit our needs; and still others, developed at Sandia. The authors have attempted to present all methods in a simple and concise manner but in sufficient detail to make them readily usable. It is not to be inferred that these methods are universal for any type of sample, but they have been found very reliable for the types of samples mentioned.

  3. C%2B%2B tensor toolbox user manual.

    SciTech Connect (OSTI)

    Plantenga, Todd D.; Kolda, Tamara Gibson

    2012-04-01

    The C++ Tensor Toolbox is a software package for computing tensor decompositions. It is based on the Matlab Tensor Toolbox, and is particularly optimized for sparse data sets. This user manual briefly overviews tensor decomposition mathematics, software capabilities, and installation of the package. Tensors (also known as multidimensional arrays or N-way arrays) are used in a variety of applications ranging from chemometrics to network analysis. The Tensor Toolbox provides classes for manipulating dense, sparse, and structured tensors in C++. The Toolbox compiles into libraries and is intended for use with custom applications written by users.

  4. GADRAS-DRF 18.5 User's Manual.

    SciTech Connect (OSTI)

    Horne, Steven M.; Thoreson, Gregory G; Theisen, Lisa A.; Mitchell, Dean J.; Harding, Lee; Amai, Wendy A.

    2014-12-01

    The Gamma Detector Response and Analysis Software - Detector Response Function (GADRAS-DRF) application computes the response of gamma-ray and neutron detectors to incoming radiation. This manual provides step-by-step procedures to acquaint new users with the use of the application. The capabilities include characterization of detector response parameters, plotting and viewing measured and computed spectra, analyzing spectra to identify isotopes, and estimating source energy distributions from measured spectra. GADRAS-DRF can compute and provide detector responses quickly and accurately, giving users the ability to obtain usable results in a timely manner (a matter of seconds or minutes).

  5. Reimbursable Work for Non-Federal Sponsors Process Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-03

    This Manual provides detailed requirements to supplement DOE O 481.1B, Work For Others (Non-Department of Energy Funded Work), dated 9-28-01, which establishes requirements for the performance of work for non-Department of Energy (DOE)/non-National Nuclear Security Administration (NNSA) entities by DOE/NNSA/contractor personnel and/or the use of DOE/NNSA facilities that is not directly funded by DOE/NNSA appropriations. Chg 1, dated 9-28-01, supersedes DOE M 481.1-1. Certified 12-28-06.

  6. PUB-3000 | BERKELEY LAB HEALTH AND SAFETY MANUAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesseworkSURVEYI/O Streams forOrhanTheoretical Methods ES&H MANUAL

  7. DOE Manual - ADVISORY COMMITTEE MANAGEMENT PROGRAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-in electric vehicle10nominate anDepartment ofTraining|LoanpageThis Manual

  8. User's Manual for BEST-Dairy: Benchmarking and Energy/water-Saving Tool (BEST) for the Dairy Processing Industry (Version 1.2)

    E-Print Network [OSTI]

    Xu, T.

    2011-01-01

    Manual for BEST-Dairy: Benchmarking and Energy/water-SavingManual for BEST-Dairy: Benchmarking and Energy/water-SavingManual for BEST-Dairy (V1.2): Benchmarking and Energy/water-

  9. Clean Lead Facility Inventory System user`s manual

    SciTech Connect (OSTI)

    Garcia, J.F.

    1994-12-01

    The purpose of this user`s manual is to provide instruction and guidance needed to enter and maintain inventory information for the Clean Lead Facility (CLF), PER-612. Individuals responsible for maintaining and using the system should study and understand the information provided. The user`s manual describes how to properly use and maintain the CLF Inventory System. Annual, quarterly, monthly, and current inventory reports may be printed from the Inventory System for reporting purposes. Profile reports of each shipment of lead may also be printed for verification and documentation of lead transactions. The CLF Inventory System was designed on Microsoft Access version 2.0. Similar inventory systems are in use at the Idaho National Engineering Laboratory (INEL) to facilitate site-wide compilations of mixed waste data. The CLF Inventory System was designed for inventorying the clean or non-radioactive contaminated lead stored at the CLF. This data, along with the mixed waste data, will be compiled into the Idaho Mixed Waste Information (IMWI) system for reporting to the Department of Energy Idaho Office, Department of Energy Headquarters, and/or the State of Idaho.

  10. Design and installation manual for thermal energy storage

    SciTech Connect (OSTI)

    Cole, R L; Nield, K J; Rohde, R R; Wolosewicz, R M

    1980-01-01

    The purpose of this manual is to provide information on the design and installation of thermal energy storage in active solar systems. It is intended for contractors, installers, solar system designers, engineers, architects, and manufacturers who intend to enter the solar energy business. The reader should have general knowledge of how solar heating and cooling systems operate and knowledge of construction methods and building codes. Knowledge of solar analysis methods such as f-Chart, SOLCOST, DOE-1, or TRNSYS would be helpful. The information contained in the manual includes sizing storage, choosing a location for the storage device, and insulation requirements. Both air-based and liquid-based systems are covered with topics on designing rock beds, tank types, pump and fan selection, installation, costs, and operation and maintenance. Topics relevant to latent heat storage include properties of phase-change materials, sizing the storage unit, insulating the storage unit, available systems, and cost. Topics relevant to heating domestic water include safety, single- and dual-tank systems, domestic water heating with air- and liquid-based space heating systems, and stand alone domestics hot water systems. Several appendices present common problems with storage systems and their solutions, heat transfer fluid properties, economic insulation thickness, heat exchanger sizing, and sample specifications for heat exchangers, wooden rock bins, steel tanks, concrete tanks, and fiberglass-reinforced plastic tanks.

  11. Programmer`s manual for CAMCON: Compliance Assessment Methodology CONtroller

    SciTech Connect (OSTI)

    Rechard, R.P. [Sandia National Labs., Albuquerque, NM (United States); Gilkey, A.P.; Rudeen, D.K.; Byle, K.A. [New Mexico Engineering Research Inst., Albuquerque, NM (United States); Iuzzolino, H.J. [Geo-Centers, Inc., Albuquerque, NM (United States)

    1993-05-01

    CAMCON, the Compliance Assessment Methodology CONtroller, is an analysis system that assists in assessing the compliance of the Waste Isolation Pilot Plant (WIPP) with applicable long-term regulations of the US Environmental Protection Agency, including Subpart B of the Environmental Standards for the Management and Disposal of spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes, 40 CFR 191 and 40CFR268.6, which is the portion of the Land Disposal Restrictions implementing the Resource, Conservative, and Recovery Act of 1976, as amended that states the conditions for disposal of hazardous chemical wastes. This manual provides an architectural overview of the CAMCON system. Furthermore this manual presents guidelines and presents suggestions for programmers developing the many different types of software necessary to investigate various events and physical processes of the WIPP. These guidelines include user interface requirements, minimum quality assurance requirements, coding style suggestions, and the use of numerous software libraries developed specifically for or adapted for the CAMCON system.

  12. Operation and Maintenance Manual for the Central Facilities Area Sewage Treatment Plant

    SciTech Connect (OSTI)

    Norm Stanley

    2011-02-01

    This Operation and Maintenance Manual lists operator and management responsibilities, permit standards, general operating procedures, maintenance requirements and monitoring methods for the Sewage Treatment Plant at the Central Facilities Area at the Idaho National Laboratory. The manual is required by the Municipal Wastewater Reuse Permit (LA-000141-03) the sewage treatment plant.

  13. Shared Control Between Human and Machine: Haptic Display of Automation During Manual Control of Vehicle Heading

    E-Print Network [OSTI]

    Gillespie, Brent

    of the human/machine task. Results are presented from 2 experiments in which 11 subjects completed a pathShared Control Between Human and Machine: Haptic Display of Automation During Manual Control control is described in which a machine's manual control interface is motorized to allow a human

  14. Links to related documents referenced within the Engineering Manual: Appendices and Risk Assessment Spreadsheet

    E-Print Network [OSTI]

    Quigg, Chris

    Links to related documents referenced within the Engineering Manual: Appendices and Risk Assessment Spreadsheet #12;Version No.Fermi National Accelerator Laboratory Engineering Manual 07/10 Overview i Engineering at Fermilab 4 ii Purpose and Scope 5 iii Responsibilities 7 Fermilab Engineering Process 1

  15. Demonstration Sites of Best Management Practices: A Manual for the Upper Etowah River Alliance

    E-Print Network [OSTI]

    Radcliffe, David

    Demonstration Sites of Best Management Practices: A Manual for the Upper Etowah River Alliance Practices: A Manual for the Upper Etowah River Alliance Organization Contents i. Introduction and is for the Upper Etowah River Alliance (UERA), their counterparts and our successors under the CWA grant

  16. Pollutant Assessments Group Procedures Manual: Volume 1, Administrative and support procedures

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    This manual describes procedures currently in use by the Pollutant Assessments Group. The manual is divided into two volumes: Volume 1 includes administrative and support procedures, and Volume 2 includes technical procedures. These procedures are revised in an ongoing process to incorporate new developments in hazardous waste assessment technology and changes in administrative policy. Format inconsistencies will be corrected in subsequent revisions of individual procedures. The purpose of the Pollutant Assessments Groups Procedures Manual is to provide a standardized set of procedures documenting in an auditable manner the activities performed by the Pollutant Assessments Group (PAG) of the Health and Safety Research Division (HASRD) of the Environmental Measurements and Applications Section (EMAS) at Oak Ridge National Laboratory (ORNL). The Procedures Manual ensures that the organizational, administrative, and technical activities of PAG conform properly to protocol outlined by funding organizations. This manual also ensures that the techniques and procedures used by PAG and other contractor personnel meet the requirements of applicable governmental, scientific, and industrial standards. The Procedures Manual is sufficiently comprehensive for use by PAG and contractor personnel in the planning, performance, and reporting of project activities and measurements. The Procedures Manual provides procedures for conducting field measurements and includes program planning, equipment operation, and quality assurance elements. Successive revisions of this manual will be archived in the PAG Document Control Department to facilitate tracking of the development of specific procedures.

  17. A summary of chapter 4 (pages 69104) of the IMCP Manual (reference information on page 4) Technical Summary

    E-Print Network [OSTI]

    concrete permeability; increased durability. · · · · · · · · · · · · · · · · 4a Cement Hydration Materials and Construction Practices for Concrete Pavements: A State-of-the- Practice Manual (IMCP manual in a finer, less permeable micro- structure, increased strength, and durability. Lower heat of hydration can

  18. Manual of functions, assignments, and responsibilities for nuclear safety: Revision 2

    SciTech Connect (OSTI)

    Not Available

    1994-10-15

    The FAR Manual is a convenient easy-to-use collection of the functions, assignments, and responsibilities (FARs) of DOE nuclear safety personnel. Current DOE directives, including Orders, Secretary of Energy Notices, and other assorted policy memoranda, are the source of this information and form the basis of the FAR Manual. Today, the majority of FARs for DOE personnel are contained in DOE`s nuclear safety Orders. As these Orders are converted to rules in the Code of Federal Regulations, the FAR Manual will become the sole source for information relating to the functions, assignments, responsibilities of DOE nuclear safety personnel. The FAR Manual identifies DOE directives that relate to nuclear safety and the specific DOE personnel who are responsible for implementing them. The manual includes only FARs that have been extracted from active directives that have been approved in accordance with the procedures contained in DOE Order 1321.1B.

  19. Technical specifications manual for the MARK-1 pulsed ionizing radiation detection system. Volume 1

    SciTech Connect (OSTI)

    Lawrence, R.S.; Harker, Y.D.; Jones, J.L.; Hoggan, J.M.

    1993-03-01

    The MARK-1 detection system was developed by the Idaho National Engineering Laboratory for the US Department of Energy Office of Arms Control and Nonproliferation. The completely portable system was designed for the detection and analysis of intense photon emissions from pulsed ionizing radiation sources. This manual presents the technical design specifications for the MARK-1 detection system and was written primarily to assist the support or service technician in the service, calibration, and repair of the system. The manual presents the general detection system theory, the MARK-1 component design specifications, the acquisition and control software, the data processing sequence, and the system calibration procedure. A second manual entitled: Volume 2: Operations Manual for the MARK-1 Pulsed Ionizing Radiation Detection System (USDOE Report WINCO-1108, September 1992) provides a general operational description of the MARK-1 detection system. The Operations Manual was written primarily to assist the field operator in system operations and analysis of the data.

  20. Behavior Observation Lab Equipment Manual Room 388 04/16/14 Behavior Science Core, CHDD, University of Washington 1

    E-Print Network [OSTI]

    Behavior Observation Lab Equipment Manual Room 388 04/16/14 Behavior Science Core, CHDD, University to be in the lab. #12;Behavior Observation Lab Equipment Manual Room 388 04/16/14 Behavior Science Core, CHDD;Behavior Observation Lab Equipment Manual Room 388 04/16/14 Behavior Science Core, CHDD, University

  1. New Technologies to Reclaim Arid Lands User's Manual

    SciTech Connect (OSTI)

    W. K. Ostler

    2002-10-01

    Approximately 70 percent of all U.S. military training lands are located in arid and semi-arid areas. Training activities in such areas frequently adversely affect vegetation, damaging plants and reducing the resilience of vegetation to recover once disturbed. Fugitive dust resulting from a loss of vegetation creates additional problems for human health, increasing accidents due to decreased visibility, and increasing maintenance costs for roads, vehicles, and equipment. Under conventional technologies to mitigate these impacts, it is estimated that up to 35 percent of revegetation projects in arid areas will fail due to unpredictable natural environmental conditions, such as drought, and reclamation techniques that were inadequate to restore vegetative cover in a timely and cost-effective manner. New reclamation and restoration techniques are needed in desert ranges to help mitigate the adverse effects of military training and other activities to arid-land environments. In 1999, a cooperative effort between the U.S. Department of Energy (DOE), the US. Department of Defense (DoD), and selected university scientists was undertaken to focus on mitigating military impacts in arid lands. As arid lands are impacted due to DoD and DOE activities, biological and soil resources are gradually lost and the habitat is altered. A conceptual model of that change in habitat quality is described for varying levels of disturbance in the Mojave Desert. As the habitat quality degrades and more biological and physical resources are lost from training areas, greater costs are required to return the land to sustainable levels. The purpose of this manual is to assist land managers in recognizing thresholds associated with habitat degradation and provide reclamation planning and techniques that can reduce the costs of mitigation for these impacted lands to ensure sustainable use of these lands. The importance of reclamation planning is described in this manual with suggestions about establishing project objectives, scheduling, budgeting, and selecting cost-effective techniques. Reclamation techniques include sections describing: (1) erosion control (physical, chemical, and biological), (2) site preparation, (3) soil amendments, (4) seeding, (5) planting, (6) grazing and weed control, (7) mulching, (8) irrigation, and (9) site protection. Each section states the objectives of the technique, the principles, an in-depth look at the techniques, and any special considerations as it relates to DoD or DOE lands. The need for monitoring and remediation is described to guide users in monitoring reclamation efforts to evaluate their cost-effectiveness. Costs are provided for the proposed techniques for the major deserts of the southwestern U.S. showing the average and range of costs. A set of decision tools are provided in the form of a flow diagram and table to guide users in selecting effective reclamation techniques to achieve mitigation objectives. Recommendations are provided to help summarize key reclamation principles and to assist users in developing a successful program that contributes to sustainable uses of DoD and DOE lands. The users manual is helpful to managers in communicating to installation management the needs and consequences of training decisions and the costs required to achieve successful levels of sustainable use. This users manual focuses on the development of new reclamation techniques that have been implemented at the National Training Center at Fort Irwin, California, and are applicable to most arid land reclamation efforts.

  2. Montana Rivers Information System : Edit/Entry Program User's Manual.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration; Montana Department of Fish, Wildlife and Parks

    1992-07-01

    The Montana Rivers Information System (MRIS) was initiated to assess the state`s fish, wildlife, and recreation value; and natural cultural, and geologic features. The MRIS is now a set of data bases containing part of the information in the Natural Heritage Program natural features and threatened and endangered species data bases and comprises of the Montana Interagency Stream Fisheries Database; the MDFWP Recreation Database; and the MDFWP Wildlife Geographic Information System. The purpose of this User`s Manual is to describe to the user how to maintain the MRIS database of their choice by updating, changing, deleting, and adding records using the edit/entry programs; and to provide to the user all information and instructions necessary to complete data entry into the MRIS databases.

  3. Hanford Environmental Information System (HEIS). Volume 3, Subject Area reference manual

    SciTech Connect (OSTI)

    Schreck, R.I.

    1994-01-14

    The Hanford Environmental Information System (HEIS) Subject Area manuals are designed as reference guides, that is, each chapter provides the information needed to make best use of each subject area, its tables, and reporting capabilities. Each subject area is documented in a chapter in one of the subject area manuals. Because these are reference manuals, most of the information is also available in the online help system as well. See Section 5.4.2 of the HEIS User`s Guide (DOE-RL 1994a) for a detailed description of the online help.

  4. Dairy Analytics and Nutrient Analysis (DANA) Prototype System User Manual

    SciTech Connect (OSTI)

    Sam Alessi; Dennis Keiser

    2012-10-01

    This document is a user manual for the Dairy Analytics and Nutrient Analysis (DANA) model. DANA provides an analysis of dairy anaerobic digestion technology and allows users to calculate biogas production, co-product valuation, capital costs, expenses, revenue and financial metrics, for user customizable scenarios, dairy and digester types. The model provides results for three anaerobic digester types; Covered Lagoons, Modified Plug Flow, and Complete Mix, and three main energy production technologies; electricity generation, renewable natural gas generation, and compressed natural gas generation. Additional options include different dairy types, bedding types, backend treatment type as well as numerous production, and economic parameters. DANA’s goal is to extend the National Market Value of Anaerobic Digester Products analysis (informa economics, 2012; Innovation Center, 2011) to include a greater and more flexible set of regional digester scenarios and to provide a modular framework for creation of a tool to support farmer and investor needs. Users can set up scenarios from combinations of existing parameters or add new parameters, run the model and view a variety of reports, charts and tables that are automatically produced and delivered over the web interface. DANA is based in the INL’s analysis architecture entitled Generalized Environment for Modeling Systems (GEMS) , which offers extensive collaboration, analysis, and integration opportunities and greatly speeds the ability construct highly scalable web delivered user-oriented decision tools. DANA’s approach uses server-based data processing and web-based user interfaces, rather a client-based spreadsheet approach. This offers a number of benefits over the client-based approach. Server processing and storage can scale up to handle a very large number of scenarios, so that analysis of county, even field level, across the whole U.S., can be performed. Server based databases allow dairy and digester parameters be held and managed in a single managed data repository, while allows users to customize standard values and perform individual analysis. Server-based calculations can be easily extended, versions and upgrades managed, and any changes are immediately available to all users. This user manual describes how to use and/or modify input database tables, run DANA, view and modify reports.

  5. Manual of Administrative Policies and Procedures POLICY 6.7 -Educational Assistance

    E-Print Network [OSTI]

    Lennard, William N.

    Manual of Administrative Policies and Procedures POLICY 6.7 - Educational Assistance Policy Category: Personnel Subject: Educational Assistance Approving Authority: Board of Governors Responsible Officer: Vice President, Resources and Operations Responsible Office: Human Resources Related Procedures

  6. DOE Publishes Best Practices Manual for Public Outreach and Education for Carbon Storage Projects

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Regional Carbon Sequestration Partnerships program has released a new manual to recommend best practices for public outreach and education for carbon dioxide storage projects.

  7. The Fish and Wildlife Service Manual, Part 340 FW 3: Rights-of...

    Open Energy Info (EERE)

    The Fish and Wildlife Service Manual, Part 340 FW 3: Rights-of-Way and Road Closings Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory...

  8. A manual procedure for assembly sequence planning based on the exploded view method 

    E-Print Network [OSTI]

    Rivero, Andres R

    1995-01-01

    This thesis covers the development of a manual planning procedure based on the computerized method of exploded views to generate an optimal or near-optimal assembly sequence. Care has been taken to minimize iterative and ...

  9. rev December 2010 Radiation Safety Manual Section 9 Radiation Protection Procedures

    E-Print Network [OSTI]

    Sniadecki, Nathan J.

    rev December 2010 Radiation Safety Manual Section 9 ­ Radiation Protection Procedures Page 9-1 Section 9 Radiation Protection Procedures Contents Section 9 9-1 Radiation Protection Procedures Protective Measures - External Radiation.....................................9-5 1. Time

  10. Surface Environmental Surveillance Procedures Manual, PNL-MA-580, Rev. 5

    SciTech Connect (OSTI)

    Hanf, Robert W.; Poston, Ted M.; Bisping, Lynn E.

    2007-07-01

    This manual contains the procedures that are used for the collection of routine Surface Environmental Surveillance Project environmental samples and field measurements on and around the Hanford Site. Specific responsibilities for project personnel are also defined.

  11. Federal Radiological Monitoring and Assessment Center Monitoring Manual Volume 2, Radiation Monitoring and Sampling

    SciTech Connect (OSTI)

    NSTec Aerial Measurement Systems

    2012-07-31

    The FRMAC Monitoring and Sampling Manual, Volume 2 provides standard operating procedures (SOPs) for field radiation monitoring and sample collection activities that are performed by the Monitoring group during a FRMAC response to a radiological emergency.

  12. Creating a Systems Engineering Approach for the Manual on Uniform Traffic Control Devices 

    E-Print Network [OSTI]

    McNeal, Heather

    2010-07-14

    The Manual on Uniform Traffic Control Devices (MUTCD) establishes the basic principles for the design, selection, installation, operation, maintenance, and removal of traffic control devices (TCDs). The MUTCD indicates ...

  13. Using Product Specific Simulation Models in a Tool for Manual Commissioning of Air Handling Units 

    E-Print Network [OSTI]

    Eriksson, J.

    2003-01-01

    . Cetetherm IQHeat. Cetetherm. Ronneby. Sweden. 3. Portland Energy Conservation Inc. Methods for automated and continuous commissioning of build- ings. Air-Conditioning and refrigeraration technol- ogy institute, Arlington, Virginia. 4. T. Haasl, D... SPECIFIC SIMULATION MODELS IN A TOOL FOR MANUAL COMMISSIONING OF AIR HANDLING UNITS JÖRGEN ERIKSSON ĹF-INSTALLATION AB GOTHENBURG, SWEDEN ABSTRACT This short paper describes an outline of a tool for manual commissioning of air handling units...

  14. The Water Rights Analysis Package Users Manual, Version 2.0 

    E-Print Network [OSTI]

    Wurbs, Ralph A.

    2003-01-01

    System Users Manual by Ralph A. Wurbs Civil Engineering Department Texas A&M University TR-256 Texas Water Resources Institute College Station, Texas August 2003 Water Rights Analysis Package (WRAP) Modeling System Users Manual Prepared by Ralph A.... Wurbs Professor Department of Civil Engineering Texas A&M University College Station, Texas 77843-3136 for the Texas Commission on Environmental Quality Austin, Texas 78711-3087 under TCEQ/TWRI Contract No. 9880074800 with Supplemental Funding...

  15. Uranium hexafluoride: A manual of good handling practices. Revision 7

    SciTech Connect (OSTI)

    NONE

    1995-01-01

    The United States Enrichment Corporation (USEC) is continuing the policy of the US Department of Energy (DOE) and its predecessor agencies in sharing with the nuclear industry their experience in the area of uranium hexafluoride (UF{sub 6}) shipping containers and handling procedures. The USEC has reviewed Revision 6 or ORO-651 and is issuing this new edition to assure that the document includes the most recent information on UF{sub 6} handling procedures and reflects the policies of the USEC. This manual updates the material contained in earlier issues. It covers the essential aspects of UF{sub 6} handling, cylinder filling and emptying, general principles of weighing and sampling, shipping, and the use of protective overpacks. The physical and chemical properties of UF{sub 6} are also described. The procedures and systems described for safe handling of UF{sub 6} presented in this document have been developed and evaluated during more than 40 years of handling vast quantities of UF{sub 6}. With proper consideration for its nuclear properties, UF{sub 6} may be safely handled in essentially the same manner as any other corrosive and/or toxic chemical.

  16. NV/YMP radiological control manual, Revision 2

    SciTech Connect (OSTI)

    Gile, A.L.

    1996-11-01

    The Nevada Test Site (NTS) and the adjacent Yucca Mountain Project (YMP) are located in Nye County, Nevada. The NTS has been the primary location for testing nuclear explosives in the continental US since 1951. Current activities include operating low-level radioactive and mixed waste disposal facilities for US defense-generated waste, assembly/disassembly of special experiments, surface cleanup and site characterization of contaminated land areas, and non-nuclear test operations such as controlled spills of hazardous materials at the hazardous Materials (HAZMAT) Spill Center (HSC). Currently, the major potential for occupational radiation exposure is associated with the burial of low-level nuclear waste and the handling of radioactive sources. Planned future remediation of contaminated land areas may also result in radiological exposures. The NV/YMP Radiological Control Manual, Revision 2, represents DOE-accepted guidelines and best practices for implementing Nevada Test Site and Yucca Mountain Project Radiation Protection Programs in accordance with the requirements of Title 10 Code of Federal Regulations Part 835, Occupational Radiation Protection. These programs provide protection for approximately 3,000 employees and visitors annually and include coverage for the on-site activities for both personnel and the environment. The personnel protection effort includes a DOE Laboratory Accreditation Program accredited dosimetry and personnel bioassay programs including in-vivo counting, routine workplace air sampling, personnel monitoring, and programmatic and job-specific As Low as Reasonably Achievable considerations.

  17. WASTES: Wastes system transportation and economic simulation: Version 2, Programmer's reference manual

    SciTech Connect (OSTI)

    Buxbaum, M.E.; Shay, M.R.

    1986-11-01

    The WASTES Version II (WASTES II) Programmer's Reference Manual was written to document code development activities performed under the Monitored Retrievable Storage (MRS) Program at Pacific Northwest Laboratory (PNL). The manual will also serve as a valuable tool for programmers involved in maintenance of and updates to the WASTES II code. The intended audience for this manual are experienced FORTRAN programmers who have only a limited knowledge of nuclear reactor operation, the nuclear fuel cycle, or nuclear waste management practices. It is assumed that the readers of this manual have previously reviewed the WASTES II Users Guide published as PNL Report 5714. The WASTES II code is written in FORTRAN 77 as an extension to the SLAM commercial simulation package. The model is predominately a FORTRAN based model that makes extensive use of the SLAM file maintenance and time management routines. This manual documents the general manner in which the code is constructed and the interactions between SLAM and the WASTES subroutines. The functionality of each of the major WASTES subroutines is illustrated with ''block flow'' diagrams. The basic function of each of these subroutines, the algorithms used in them, and a discussion of items of particular note in the subroutine are reviewed in this manual. The items of note may include an assumption, a coding practice that particularly applies to a subroutine, or sections of the code that are particularly intricate or whose mastery may be difficult. The appendices to the manual provide extensive detail on the use of arrays, subroutines, included common blocks, parameters, variables, and files.

  18. appl_household2001.pdf

    U.S. Energy Information Administration (EIA) Indexed Site

    18.1 2.0 5.3 4.1 3.3 3.5 9.9 Most-Used Refrigerator Defrost Method Frost-Free ... 96.9 8.0 25.7 21.8 19.1 22.3 7.8 Manual...

  19. Fact #850: December 8, 2014 Automatic Transmissions have closed the Fuel Economy Gap with Manual Transmissions- Dataset

    Broader source: Energy.gov [DOE]

    Excel file with dataset for Fact #850: December 8, 2014 Automatic Transmissions have closed the Fuel Economy Gap with Manual Transmissions

  20. PFP up-right lift UL-20/26 manlifts

    SciTech Connect (OSTI)

    Morley, J.M.

    1994-11-09

    This Technical Evaluation of Equipment Maintenance (TEEM) is provided principally to document vendor suggested maintenance requirements and deviations from vendor suggested requirements, and provide documentation to support PM procedures. As additional maintenance activities are identified, they will be documented in later revisions. This TEEM is applicable to four single-person manlifts. The report documents preventive maintenance evaluations, semi-annual checks, safety rules before the use of the manlifts, and routine service checks.

  1. Sandia National Laboratories, California Environmental Management System program manual.

    SciTech Connect (OSTI)

    Larsen, Barbara L.

    2012-03-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 436.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site first received ISO 14001 certification in September 2006 and recertification in 2009. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy and Water Resource Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New Mexico (SNL/NM). Although these groups, from an organizational perspective, are part of Division 8000, they are managed locally and fall under the environmental requirements specific to their New Mexico location. The New Mexico groups in Division 8000 follow the corporate EMS Program for New Mexico operations.

  2. Sandia National Laboratories, California Environmental Management System Program Manual.

    SciTech Connect (OSTI)

    Larsen, Barbara L.

    2011-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New Mexico (SNL/NM). Although these groups, from an organizational perspective, are part of Division 8000, they are managed locally and fall under the environmental requirements specific to their New Mexico location. The New Mexico groups in Division 8000 follow the corporate EMS Program for New Mexico operations.

  3. Sandia National Laboratories, California Environmental Management System Program Manual.

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services Environmental programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New Mexico (SNL/NM). Although these groups, from an organizational perspective, are part of Division 8000, they are managed locally and fall under the environmental requirements specific to their New Mexico location. The New Mexico groups in Division 8000 follow the corporate EMS Program for New Mexico operations.

  4. Hanford Environmental Information System (HEIS) Operator`s Manual. Volume 1

    SciTech Connect (OSTI)

    Schreck, R.I.

    1991-10-01

    The Hanford Environmental Information System (HEIS) is a consolidated set of automated resources that effectively manage the data gathered during environmental monitoring and restoration of the Hanford Site. The HEIS includes an integrated database that provides consistent and current data to all users and promotes sharing of data by the entire user community. This manual describes the facilities available to the operational user who is responsible for data entry, processing, scheduling, reporting, and quality assurance. A companion manual, the HEIS User`s Manual, describes the facilities available-to the scientist, engineer, or manager who uses the system for environmental monitoring, assessment, and restoration planning; and to the regulator who is responsible for reviewing Hanford Site operations against regulatory requirements and guidelines.

  5. MS17AM LEAK CHECKER The MS17AM is a manual valve version of the MS17AB. Since it is a manual unit, some care must be

    E-Print Network [OSTI]

    Massey, Thomas N.

    MS17AM LEAK CHECKER The MS17AM is a manual valve version of the MS17AB. Since it is a manual unit, some care must be exercised in the sequencing of the valves. The most important things to remember are that during normal leak testing: 1. The THROTTLE VALVE is NEVER opened unless the ROUGH VALVE has been

  6. Integrated Fuel-Coolant Interaction (IFCI 7.0) Code User's Manual

    SciTech Connect (OSTI)

    Young, Michael F.

    1999-05-01

    The integrated fuel-coolant interaction (IFCI) computer code is being developed at Sandia National Laboratories to investigate the fuel-coolant interaction (FCI) problem at large scale using a two-dimensional, three-field hydrodynamic framework and physically based models. IFCI will be capable of treating all major FCI processes in an integrated manner. This document is a description of IFCI 7.0. The user's manual describes the hydrodynamic method and physical models used in IFCI 7.0. Appendix A is an input manual provided for the creation of working decks.

  7. Behavior Observation Lab Equipment Manual Room SB208 04/16/14 Behavior Science Core, CHDD, University of Washington 1

    E-Print Network [OSTI]

    Behavior Observation Lab Equipment Manual Room SB208 04/16/14 Behavior Science Core, CHDD visit or out of town researcher is scheduled to be in the lab. #12;Behavior Observation Lab Equipment the breeze from moving the shade out of it's track. #12;Behavior Observation Lab Equipment Manual Room SB208

  8. Water Security Toolkit User Manual Version 1.2.

    SciTech Connect (OSTI)

    Klise, Katherine A.; Siirola, John Daniel; Hart, David; Hart, William E.; Phillips, Cynthia A.; Haxton, Terranna; Murray, Regan; Janke, Robert; Taxon, Thomas; Laird, Carl; Seth, Arpan; Hackebeil, Gabriel; McGee, Shawn; Mann, Angelica

    2014-08-01

    The Water Security Toolkit (WST) is a suite of open source software tools that can be used by water utilities to create response strategies to reduce the impact of contamination in a water distribution network . WST includes hydraulic and water quality modeling software , optimizati on methodologies , and visualization tools to identify: (1) sensor locations to detect contamination, (2) locations in the network in which the contamination was introduced, (3) hydrants to remove contaminated water from the distribution system, (4) locations in the network to inject decontamination agents to inactivate, remove, or destroy contaminants, (5) locations in the network to take grab sample s to help identify the source of contamination and (6) valves to close in order to isolate contaminate d areas of the network. This user manual describes the different components of WST , along w ith examples and case studies. License Notice The Water Security Toolkit (WST) v.1.2 Copyright c 2012 Sandia Corporation. Under the terms of Contract DE-AC04-94AL85000, there is a non-exclusive license for use of this work by or on behalf of the U.S. government. This software is distributed under the Revised BSD License (see below). In addition, WST leverages a variety of third-party software packages, which have separate licensing policies: Acro Revised BSD License argparse Python Software Foundation License Boost Boost Software License Coopr Revised BSD License Coverage BSD License Distribute Python Software Foundation License / Zope Public License EPANET Public Domain EPANET-ERD Revised BSD License EPANET-MSX GNU Lesser General Public License (LGPL) v.3 gcovr Revised BSD License GRASP AT&T Commercial License for noncommercial use; includes randomsample and sideconstraints executable files LZMA SDK Public Domain nose GNU Lesser General Public License (LGPL) v.2.1 ordereddict MIT License pip MIT License PLY BSD License PyEPANET Revised BSD License Pyro MIT License PyUtilib Revised BSD License PyYAML MIT License runpy2 Python Software Foundation License setuptools Python Software Foundation License / Zope Public License six MIT License TinyXML zlib License unittest2 BSD License Utilib Revised BSD License virtualenv MIT License Vol Common Public License vpykit Revised BSD License Additionally, some precompiled WST binary distributions might bundle other third-party executables files: Coliny Revised BSD License (part of Acro project) Dakota GNU Lesser General Public License (LGPL) v.2.1 PICO Revised BSD License (part of Acro project) i Revised BSD License Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Sandia National Laboratories nor Sandia Corporation nor the names of its con- tributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS %22AS IS%22 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IM- PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUD- ING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ii Acknowledgements This work was supported by the U.S. Environmental Protection Agen

  9. M.S. DEGREE PROGRAMS IN ENVIRONMENTAL SCIENCE POLICY AND PROCEDURES MANUAL

    E-Print Network [OSTI]

    Salvaggio, Carl

    1 M.S. DEGREE PROGRAMS IN ENVIRONMENTAL SCIENCE POLICY AND PROCEDURES MANUAL of Environmental Science is reflected in the graduate curricula and in the policy Environmental Science (ES) Program is composed of three tracks: BS, BS/MS, and MS

  10. Chapter 1. Basic Interest Theory. Manual for SOA Exam FM/CAS Exam 2.

    E-Print Network [OSTI]

    Arcones, Miguel A.

    1/52 Chapter 1. Basic Interest Theory. Manual for SOA Exam FM/CAS Exam 2. Chapter 1. Basic Interest Exam FM/CAS Exam 2. #12;2/52 Chapter 1. Basic Interest Theory. Section 1.1. Amount and accumulation;3/52 Chapter 1. Basic Interest Theory. Section 1.1. Amount and accumulation functions. Interest When money

  11. General Provisions, Page 1 The purpose of this Human Resources Manual is to

    E-Print Network [OSTI]

    General Provisions, Page 1 Purpose The purpose of this Human Resources Manual is to: 1. Provide for submission of Human Resources System data. 4. Outline the conditions, methods and schedules of employee pay State University is a land-grant institution committed to offering access in it's educational, scholarly

  12. UC Davis Policy and Procedure Manual Chapter 290, Health and Safety Services

    E-Print Network [OSTI]

    Leistikow, Bruce N.

    UC Davis Policy and Procedure Manual Chapter 290, Health and Safety Services Section 16, Ergonomics/OSHA ergonomics standard and UC/Collective Bargaining Unit Agreements. C. The program will be incorporated are then evaluated to determine if intervention would be beneficial. E. The following criteria will be used

  13. Table of Contents Page i 2013 Residential Compliance Manual January 2014

    E-Print Network [OSTI]

    Table of Contents Page i 2013 Residential Compliance Manual January 2014 Table of Contents 8, but incorporating all features of Prescriptive Package A. The energy budget includes water heating, space heating and water heating energy use in accordance with a detailed set of rules. The computer programs models

  14. Working safely in gamma radiography. A training manual for industrial radiographers

    SciTech Connect (OSTI)

    McGuire, S.A.; Peabody, C.A.

    1982-09-01

    This manual is designed for classroom training in working safely in industrial radiography using gamma sources. The purpose is to train radiographers' assistants to work safely as a qualified gamma radiographer. The contents cover the essentials of radiation, radiation protection, emergency procedures, gamma cameras, and biological effects of radiation. (ACR)

  15. Financial Policy Manual 1106.6 PLANT ASSETS -EQUIPMENT IN PROCESS

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 1106.6 PLANT ASSETS - EQUIPMENT IN PROCESS Effective: May 2005 for standard items that are altered or customized to make them usable on a project do not qualify as EIP location, tagging contact and phone number, and custodian and phone number. Upon creation, PMG will notify

  16. PQMII POWER QUALITY METER INSTRUCTION MANUAL 11 PQMII Power Quality Meter

    E-Print Network [OSTI]

    Meyers, Steven D.

    #12;#12;#12;PQMII POWER QUALITY METER ­ INSTRUCTION MANUAL 1­1 PQMII Power Quality Meter Chapter 1 Multilin PQMII Power Quality Meter is an ideal choice for continuous monitoring of a single or three-phase system. It provides metering for current, voltage, real power, reactive power, apparent power, energy use

  17. PART III DIVISION 13 PAGE 1 RUTGERS DESIGN STANDARDS MANUAL NOV 2008 DIVISION 13 SPECIAL CONSTRUCTION

    E-Print Network [OSTI]

    operating condition. The system #12;PART III DIVISION 13 PAGE 2 RUTGERS DESIGN STANDARDS MANUAL NOV 2008 detail battery calculations per NFPA 72. 4. Indicate all A/C, fans, Dampers to be monitored by fire alarm detailed battery calculations per the

  18. FDL: A Prototype Formal Digital Library Description and Draft Reference Manual

    E-Print Network [OSTI]

    Kreitz, Christoph

    FDL: A Prototype Formal Digital Library ­ Description and Draft Reference Manual ­ Stuart Allen Library (FDL). We designed the system and assembled the prototype as part of a research project sponsored by the Office of Naval Research entitled Building Interactive Digital Libraries of Formal Algorithmic Knowledge

  19. 378 Solutions Manual x Fluid Mechanics, Fifth Edition where heat flow, J/s

    E-Print Network [OSTI]

    Bahrami, Majid

    378 Solutions Manual x Fluid Mechanics, Fifth Edition where heat flow, J/s A surface area, m Q 2 'T Ans. L V VV U PU § ·' : 3 3 3 3 ¨ ¸ © ą 5.18 Under laminar conditions, the volume flow Q through temperature difference, K The dimensionless form of h, called the Stanton number, is a combination of h, fluid

  20. NASA/TM-2005-213769 KB3D Reference Manual Version 1.a

    E-Print Network [OSTI]

    Muńoz, César A.

    June 2005 NASA/TM-2005-213769 KB3D Reference Manual ­ Version 1.a Cesar Munoz and Radu Siminiceanu, Virginia Gilles Dowek École Polytechnique, Palaiseau, France #12;The NASA STI Program Office . . . in Profile Since its founding, NASA has been dedicated to the advancement of aeronautics and space science

  1. UBC Social, Ecological Economic Development Studies (SEEDS) Student Report GHG Emissions Data Tracker User Manual

    E-Print Network [OSTI]

    of a project/report." #12;GHG Emissions Data Tracker User Manual #12;Add/Edit vehicles Vehicles type addition will be saved automatically. Add Vehicles: Enter Vehicles name in the bottom most blank space and once you enter the first character it will create a new record in database. Edit Vehicles: Click on the text box that you

  2. March 1995 NREL/TP-462-5173 A Manual for the Economic

    E-Print Network [OSTI]

    March 1995 NREL/TP-462-5173 A Manual for the Economic Evaluation of Energy Efficiency and Renewable No. DE-AC36-83CH10093 Prepared under Task No. AS026100 March 1995 #12;This report was prepared

  3. UC Davis Policy and Procedure Manual Chapter 290, Health and Safety Services

    E-Print Network [OSTI]

    Yoo, S. J. Ben

    UC Davis Policy and Procedure Manual Chapter 290, Health and Safety Services Section 65, Hazardous or injury caused by hazardous chemicals. Additional regulations for the UCD Medical Center are available maintained on UC Davis properties or in surrounding areas. 3. The environment. B. Emergencies involving

  4. Clearing, Sanitization, and Destruction of Information System Storage Media, Memory Devices, and Related Hardware Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-06-21

    The manual establishes the DOE requirements and responsibilities for clearing, sanitizing, and destroying DOE information system storage media, memory devices, and related hardware to ensure that no unauthorized information can be retrieved. Canceled by DOE N 205.17. Cancels DOE N 205.12

  5. Cardiac Valve Annulus Manual Segmentation Using Computer Assisted Visual Feedback in Three-Dimensional Image Data

    E-Print Network [OSTI]

    Oxford, University of

    Cardiac Valve Annulus Manual Segmentation Using Computer Assisted Visual Feedback in Three is an important tool for the study of valve anatomy and physiology, for the four main valves of the heart (mitral rat hearts, on all four valves. I. INTRODUCTION There are four main cardiac valves in the heart, two

  6. Controlling flow in microfluidic channels with a manually actuated pin valve

    E-Print Network [OSTI]

    Eddington, David T.

    Controlling flow in microfluidic channels with a manually actuated pin valve Marie-Elena Brett to be placed within the microchannel to obstruct flow. This new valve design can attain on/off control of fluid flow without an external power source using readily-available, low-cost materials. The valve consists

  7. Manual of Security Requirements for the Classified Automated Information System Security Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1994-07-15

    This Manual provides specific instructions and delineates the requirements to ensure the graded security of classified information entrusted to the Department of Energy (DOE) that is processed, stored, transferred, or accessed on Automated Information Systems (AISs) and AIS networks. Canceled by DOE M 471.2-2.

  8. November 2014 Laboratory Safety Manual Appendix C Templates for Lab-Specific Information

    E-Print Network [OSTI]

    Brown, Sally

    or laboratory. This CHP covers the following laboratory spaces: Building(s): Room #(s): If Parts of Room your lab's Chemical Hygiene Plan (CHP). These templates are also available as documents which can's CHP consists of the generic UW Laboratory Safety Manual plus your lab's laboratory- specific

  9. Financial Policy Manual 2006 SALES AND SERVICES CREDIT CARD SALES PCI COMPLIANCE

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2006 SALES AND SERVICES ­ CREDIT CARD SALES PCI COMPLIANCE Effective to ensure that all merchant accounts and any related third party payment processors adhere to the PCI/Center will be responsible for ensuring that a PCI self-assessment is completed each year for every merchant account

  10. Differing Professional Opinions Manual for Technical Issues Involving Environment, Safety, and Health

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-11-16

    This Manual establishes a differing professional opinion (DPO) policy to a Department of Energy (DOE) Differing Professional Opinion (DPO) Process to encourage and facilitate dialogue and resolution on DPOs from employees for technical issues involving environment, safety, and health. Does not cancel other directives. Canceled by DOE O 442.2.

  11. Financial Policy Manual 2317 PAYROLL, REAL ESTATE, SALES, USE AND OCCUPANCY AND

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2317 PAYROLL, REAL ESTATE, SALES, USE AND OCCUPANCY AND UNRELATED and Occupancy Approved Supporting Schedules · Real Estate Municipal Tax Bills · Unrelated Business Income system for determining the accurate and complete amounts due for payroll, real estate, sales, use

  12. A Prototype English-Japanese Machine Translation System for Translating IBM Computer Manuals

    E-Print Network [OSTI]

    A Prototype English-Japanese Machine Translation System for Translating IBM Computer Manuals TaiJiro Tsutsumi Natural Language Processing Science Institute, IBM Japan, Ltd. 5-19, Sanban-cho, Chlyoda-ku Tokyo developed at the Sci- ence Institute of IBM Japan, Ltd. This MT system cur- rently aims at the translation

  13. Your Heart, Your Life A Community Health Worker's Manual for the Hispanic Community

    E-Print Network [OSTI]

    Shen, Jun

    Your Heart, Your Life A Community Health Worker's Manual for the Hispanic Community #12;NIH you surrender your heart. No one at all is beyond the reach of your hands. With heartfelt voice. Heart health is the key, and you now know it well. "Let's better your health!" is your battle cry. You

  14. Radioactive Waste Management Procedures and Guidelines See Radiation Manual 1997 for further details

    E-Print Network [OSTI]

    1-24-03 Radioactive Waste Management Procedures and Guidelines See Radiation Manual 1997 PART I. Radioactive Waste A. Dry Waste 1. Labs must request a box from the Radioactive Waste program, and use only this box for accumulating their waste. 2. Place only radioactive material contaminated

  15. August 1999 Radiation Safety Manual Section 2 Licensing and Regulatory Controls

    E-Print Network [OSTI]

    Sniadecki, Nathan J.

    Nuclear Regulatory Commission (NRC) has entered into a formal agreement with the State of WashingtonAugust 1999 Radiation Safety Manual Section 2 ­ Licensing and Regulatory Controls UW Environmental Health and Safety Page 2-1 Section 2 Licensing and Regulatory Controls Contents A. Regulations

  16. SHREC'14 Track: Automatic Location of Landmarks used in Manual Anthropometry

    E-Print Network [OSTI]

    Hamza, A. Ben

    SHREC'14 Track: Automatic Location of Landmarks used in Manual Anthropometry A. Giachetti1, , E of Neurological and Movement Science, University of Verona, Italy 3Department of Computer Science and Engineering location of landmarks used in man- ual anthropometry. The track has been organized to test the ability

  17. Designing an on-line multimedia maintenance manual for a production environment

    E-Print Network [OSTI]

    Brinkman, Willem-Paul

    - would better express the complex spatial and dynamic operations on hardware. Finally, maintenance36 Designing an on-line multimedia maintenance manual for a production environment W.P. Brinkman, V.P. Buil, R. Cullen1 , R. Gobits2 and F.L. van Nes e-mail: w.p.brinkman@tue.nl Abstract Maintenance

  18. Marvell Nanolab Member login Lab Manual Index Mercury Web Berkeley Microlab Chapter 8.24

    E-Print Network [OSTI]

    Healy, Kevin Edward

    Marvell Nanolab Member login Lab Manual Index Mercury Web Berkeley Microlab Chapter 8.24 Netscope device). This microscope can do both bright field and dark field imaging. 4.0 Applicable Documents the focus as needed. 9.5 Dark field: You can select dark field mode by clicking on the DF button on the Ergo

  19. Marvell Nanolab Member login Lab Manual Index Mercury Web Berkeley Microlab UVSCOPE Operation

    E-Print Network [OSTI]

    Healy, Kevin Edward

    Marvell Nanolab Member login Lab Manual Index Mercury Web Berkeley Microlab UVSCOPE (uvscope) 1 for Bright Field, Dark Field, Interference contrast, and UV sub- micron operations. It also includes ­ Microscopic image of reflected light. 5.3 Dark Field Image ­ Microscopic image of scattered light. 5

  20. Watchdog: Hardware for Safe and Secure Manual Memory Management and Full Memory Safety

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    Watchdog: Hardware for Safe and Secure Manual Memory Management and Full Memory Safety Santosh) to become the root cause of exploitable security vulnerabilities. This paper proposes Watchdog, a hardware full hardware-enforced memory safety at low overheads. 1. Introduction Languages such as C and C

  1. Financial Policy Manual 2319.2 PAYMENT TO NON-RESIDENT ALIENS FOR HONORARIA,

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2319.2 PAYMENT TO NON-RESIDENT ALIENS FOR HONORARIA, CONSULTING FEES responsibility for the tax withholding and/or reporting of payments to non- employees who are nonresident aliens performing services for the University. NOTE: Generally, payments to nonresident aliens for independent

  2. Financial Policy Manual 1106.4 PLANT ASSETS PLANT CONSTRUCTION COSTS

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 1106.4 PLANT ASSETS ­ PLANT CONSTRUCTION COSTS Effective: December PURPOSE To properly account for the costs of construction of University plant. POLICY 1. The Office of the Comptroller is responsible for accounting for all costs of construction (new building construction, building

  3. Financial Policy Manual 2116 RECOVERY OF FACILITIES AND ADMINISTRATIVE (F&A) COSTS

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 2116 RECOVERY OF FACILITIES AND ADMINISTRATIVE (F&A) COSTS Subject of Facilities and Administrative (F&A) Costs to Sponsored Projects DEFINITION: The total costs of a sponsored, supplies, materials, equipment and travel, and (b) F&A costs, e.g., depreciation of buildings and equipment

  4. Financial Policy Manual 1106.7 PLANT ASSETS -INTERNAL USE SOFTWARE COSTS

    E-Print Network [OSTI]

    George, Edward I.

    Financial Policy Manual Page 1 1106.7 PLANT ASSETS - INTERNAL USE SOFTWARE COSTS Effective: July This policy applies to all schools and centers that incur software costs. POLICY 1. Internal-use software externally. 2. The external cost of purchased internal use software applications in excess of $5

  5. Manual for Nuclear Materials Management and Safeguards System Reporting and Data Submission

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-08-19

    The manual provides detailed instructions for documenting and reporting data submissions for nuclear materials transactions, inventories, and material balances to the Nuclear Materials Management and Safeguards System (NMMSS). Cancels DOE M 474.1-2. Canceled by DOE M 470.4-6.

  6. Boiler Kids Camp Parent Manual Division of Recreational Sports Mission Statement

    E-Print Network [OSTI]

    Ginzel, Matthew

    Boiler Kids Camp Parent Manual Division of Recreational Sports Mission Statement The Division which fosters an appreciation for a healthy lifestyle and promotes lifelong learning. Boiler Kids Camp Mission Statement Boiler Kids Camp is an interactive, summer day camp designed for children ranging

  7. The procedures manual of the Environmental Measurements Laboratory. Volume 1, 28. edition

    SciTech Connect (OSTI)

    Chieco, N.A. [ed.

    1997-02-01

    This manual covers procedures and technology currently in use at the Environmental Measurements Laboratory. An attempt is made to be sure that all work carried out will be of the highest quality. Attention is focused on the following areas: quality assurance; sampling; radiation measurements; analytical chemistry; radionuclide data; special facilities; and specifications.

  8. pV3 Batch User's Reference Manual for use with the following workstations

    E-Print Network [OSTI]

    Peraire, Jaime

    pV3 Batch User's Reference Manual Rev. 2.05 for use with the following workstations: Compaq ALPHAs. 2 #12;Contents 1 Introduction 4 2 pV3 Batch Server 5 2.1 Batch Server Startup.4 Advanced Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 pV3 Post

  9. TOPAZ2D heat transfer code users manual and thermal property data base

    SciTech Connect (OSTI)

    Shapiro, A.B.; Edwards, A.L.

    1990-05-01

    TOPAZ2D is a two dimensional implicit finite element computer code for heat transfer analysis. This user's manual provides information on the structure of a TOPAZ2D input file. Also included is a material thermal property data base. This manual is supplemented with The TOPAZ2D Theoretical Manual and the TOPAZ2D Verification Manual. TOPAZ2D has been implemented on the CRAY, SUN, and VAX computers. TOPAZ2D can be used to solve for the steady state or transient temperature field on two dimensional planar or axisymmetric geometries. Material properties may be temperature dependent and either isotropic or orthotropic. A variety of time and temperature dependent boundary conditions can be specified including temperature, flux, convection, and radiation. Time or temperature dependent internal heat generation can be defined locally be element or globally by material. TOPAZ2D can solve problems of diffuse and specular band radiation in an enclosure coupled with conduction in material surrounding the enclosure. Additional features include thermally controlled reactive chemical mixtures, thermal contact resistance across an interface, bulk fluid flow, phase change, and energy balances. Thermal stresses can be calculated using the solid mechanics code NIKE2D which reads the temperature state data calculated by TOPAZ2D. A three dimensional version of the code, TOPAZ3D is available. The material thermal property data base, Chapter 4, included in this manual was originally published in 1969 by Art Edwards for use with his TRUMP finite difference heat transfer code. The format of the data has been altered to be compatible with TOPAZ2D. Bob Bailey is responsible for adding the high explosive thermal property data.

  10. Materials and Security Consolidation Complex Facilities Radioactive Waste Management Basis and DOE Manual 435.1-1 Compliance Tables

    SciTech Connect (OSTI)

    Not Listed

    2011-09-01

    Department of Energy Order 435.1, 'Radioactive Waste Management,' along with its associated manual and guidance, requires development and maintenance of a radioactive waste management basis for each radioactive waste management facility, operation, and activity. This document presents a radioactive waste management basis for Idaho National Laboratory's Materials and Security Consolidation Center facilities that manage radioactive waste. The radioactive waste management basis for a facility comprises existing laboratory-wide and facility-specific documents. Department of Energy Manual 435.1-1, 'Radioactive Waste Management Manual,' facility compliance tables also are presented for the facilities. The tables serve as a tool for developing the radioactive waste management basis.

  11. Central Facilities Area Facilities Radioactive Waste Management Basis and DOE Manual 435.1-1 Compliance Tables

    SciTech Connect (OSTI)

    Lisa Harvego; Brion Bennett

    2011-11-01

    Department of Energy Order 435.1, 'Radioactive Waste Management,' along with its associated manual and guidance, requires development and maintenance of a radioactive waste management basis for each radioactive waste management facility, operation, and activity. This document presents a radioactive waste management basis for Idaho National Laboratory's Central Facilities Area facilities that manage radioactive waste. The radioactive waste management basis for a facility comprises existing laboratory-wide and facilityspecific documents. Department of Energy Manual 435.1-1, 'Radioactive Waste Management Manual,' facility compliance tables also are presented for the facilities. The tables serve as a tool for developing the radioactive waste management basis.

  12. Materials and Fuels Complex Facilities Radioactive Waste Management Basis and DOE Manual 435.1-1 Compliance Tables

    SciTech Connect (OSTI)

    Lisa Harvego; Brion Bennett

    2011-09-01

    Department of Energy Order 435.1, 'Radioactive Waste Management,' along with its associated manual and guidance, requires development and maintenance of a radioactive waste management basis for each radioactive waste management facility, operation, and activity. This document presents a radioactive waste management basis for Idaho National Laboratory's Materials and Fuels Complex facilities that manage radioactive waste. The radioactive waste management basis for a facility comprises existing laboratory-wide and facility-specific documents. Department of Energy Manual 435.1-1, 'Radioactive Waste Management Manual,' facility compliance tables also are presented for the facilities. The tables serve as a tool for developing the radioactive waste management basis.

  13. Research and Education Campus Facilities Radioactive Waste Management Basis and DOE Manual 435.1-1 Compliance Tables

    SciTech Connect (OSTI)

    L. Harvego; Brion Bennett

    2011-11-01

    U.S. Department of Energy Order 435.1, 'Radioactive Waste Management,' along with its associated manual and guidance, requires development and maintenance of a radioactive waste management basis for each radioactive waste management facility, operation, and activity. This document presents a radioactive waste management basis for Idaho National Laboratory Research and Education Campus facilities that manage radioactive waste. The radioactive waste management basis for a facility comprises existing laboratory-wide and facility-specific documents. Department of Energy Manual 435.1-1, 'Radioactive Waste Management Manual,' facility compliance tables also are presented for the facilities. The tables serve as a tool to develop the radioactive waste management basis.

  14. Marvell NanoLab Member login Lab Manual Contents MercuryWeb Berkeley Microlab Chapter 5.3

    E-Print Network [OSTI]

    Healy, Kevin Edward

    Microprocessor Control System Instruction Manual (copy in Office) 4.3 Oxide Growth Chart, Semiconductor Technology Handbook (in the binder stored under TYCOM terminal) 4.4 Material Safety Data Sheets for TRANS

  15. Marvell NanoLab Member login Lab Manual Contents MercuryWeb Berkeley Microlab Chapter 5.2

    E-Print Network [OSTI]

    Healy, Kevin Edward

    Microprocessor Control System Instruction Manual (copy in Office) 4.3 Oxide Growth Chart, Semiconductor Technology Handbook (in the binder stored under TYCOM terminal) 4.4 Material Safety Data Sheets for TCA

  16. Marvell NanoLab Member login Lab Manual Contents MercuryWeb Berkeley Microlab Chapter 5.1

    E-Print Network [OSTI]

    Healy, Kevin Edward

    Microprocessor Control System Instruction Manual (copy in Office) 4.3 Oxide Growth Chart, Semiconductor Technology Handbook (in the binder stored under TYCOM terminal) 4.4 Material Safety Data Sheets for TCA

  17. Reference Manual for the System Advisor Model's Wind Power Performance Model

    SciTech Connect (OSTI)

    Freeman, J.; Jorgenson, J.; Gilman, P.; Ferguson, T.

    2014-08-01

    This manual describes the National Renewable Energy Laboratory's System Advisor Model (SAM) wind power performance model. The model calculates the hourly electrical output of a single wind turbine or of a wind farm. The wind power performance model requires information about the wind resource, wind turbine specifications, wind farm layout (if applicable), and costs. In SAM, the performance model can be coupled to one of the financial models to calculate economic metrics for residential, commercial, or utility-scale wind projects. This manual describes the algorithms used by the wind power performance model, which is available in the SAM user interface and as part of the SAM Simulation Core (SSC) library, and is intended to supplement the user documentation that comes with the software.

  18. Hydra-TH User's Manual, Version: LA-CC-11120, Dated: December 1, 2011

    SciTech Connect (OSTI)

    Christon, Mark A. [Los Alamos National Laboratory; Bakosi, Jozsef [Los Alamos National Laboratory; Lowrie, Robert B. [Los Alamos National Laboratory

    2012-07-19

    Hydra-TH is a hybrid finite-element/finite-volume code built using the Hydra toolkit specifically to attack a broad class of incompressible, viscous fluid dynamics problems prevalent in the thermalhydraulics community. The purpose for this manual is provide sufficient information for an experience analyst to use Hydra-TH in an effective way. The Hydra-TH User's Manual present a brief overview of capabilities and visualization interfaces. The execution and restart models are described before turning to the detailed description of keyword input. Finally, a series of example problems are presented with sufficient data to permit the user to verify the local installation of Hydra-TH, and to permit a convenient starting point for more detailed and complex analyses.

  19. Project Records Information System (PRIS) user`s manual. Revision 2

    SciTech Connect (OSTI)

    Schwarz, R.K.; Cline, B.E.; Smith, P.S.

    1993-10-01

    The Project Records Information System (PRIS) is an interactive system developed for the Information Services Division (ISD) of Martin Marietta Energy Systems, Inc., to perform indexing, maintenance, and retrieval of information about Engineering project record documents for which they are responsible. This PRIS User`s Manual provides instruction on the use of this system. Section 2.0 of this manual presents an overview of PRIS, describing the system`s purpose; the data that it handles; functions it performs; hardware, software, and access; and help and error functions. Section 3.0 describes the interactive menu-driven operation of PRIS. Appendixes A, B, and C contain help screens, report descriptions, and the data dictionary, respectively.

  20. Aquifer thermal energy storage reference manual: seasonal thermal energy storage program

    SciTech Connect (OSTI)

    Prater, L.S.

    1980-01-01

    This is the reference manual of the Seasonal Thermal Energy Storage (STES) Program, and is the primary document for the transfer of technical information of the STES Program. It has been issued in preliminary form and will be updated periodically to include more technical data and results of research. As the program progresses and new technical data become available, sections of the manual will be revised to incorporate these data. This primary document contains summaries of: the TRW, incorporated demonstration project at Behtel, Alaska, Dames and Moore demonstration project at Stony Brook, New York, and the University of Minnesota demonstration project at Minneapolis-St. Paul, Minnesota; the technical support programs including legal/institutional assessment; economic assessment; environmental assessment; field test facilities; a compendia of existing information; numerical simulation; and non-aquifer STES concepts. (LCL)

  1. Renewable Electric Plant Information System user interface manual: Paradox 7 Runtime for Windows

    SciTech Connect (OSTI)

    1996-11-01

    The Renewable Electric Plant Information System (REPiS) is a comprehensive database with detailed information on grid-connected renewable electric plants in the US. The current version, REPiS3 beta, was developed in Paradox for Windows. The user interface (UI) was developed to facilitate easy access to information in the database, without the need to have, or know how to use, Paradox for Windows. The UI is designed to provide quick responses to commonly requested sorts of the database. A quick perusal of this manual will familiarize one with the functions of the UI and will make use of the system easier. There are six parts to this manual: (1) Quick Start: Instructions for Users Familiar with Database Applications; (2) Getting Started: The Installation Process; (3) Choosing the Appropriate Report; (4) Using the User Interface; (5) Troubleshooting; (6) Appendices A and B.

  2. Load research manual. Volume 2. Fundamentals of implementing load research procedures

    SciTech Connect (OSTI)

    Brandenburg, L.; Clarkson, G.; Grund, Jr., C.; Leo, J.; Asbury, J.; Brandon-Brown, F.; Derderian, H.; Mueller, R.; Swaroop, R.

    1980-11-01

    This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. In Volumes 1 and 2, procedures are suggested for determining data requirements for load research, establishing the size and customer composition of a load survey sample, selecting and using equipment to record customer electricity usage, processing data tapes from the recording equipment, and analyzing the data. Statistical techniques used in customer sampling are discussed in detail. The costs of load research also are estimated, and ongoing load research programs at three utilities are described. The manual includes guides to load research literature and glossaries of load research and statistical terms.

  3. Development of an energy-use estimation methodology for the revised Navy Manual MO-303

    SciTech Connect (OSTI)

    Richman, E.E.; Keller, J.M.; Wood, A.G.; Dittmer, A.L.

    1995-01-01

    The U.S. Navy commissioned Pacific Northwest Laboratory (PNL) to revise and/or update the Navy Utilities Targets Manual, NAVFAC MO-303 (U.S. Navy 1972b). The purpose of the project was to produce a current, applicable, and easy-to-use version of the manual for use by energy and facility engineers and staff at all Navy Public Works Centers (PWCs), Public Works Departments (PWDs), Engineering Field Divisions (EFDs), and other related organizations. The revision of the MO-303 manual involved developing a methodology for estimating energy consumption in buildings and ships. This methodology can account for, and equitably allocate, energy consumption within Navy installations. The analyses used to develop this methodology included developing end-use intensities (EUIs) from a vast collection of Navy base metering and billing data. A statistical analysis of the metering data, weather data, and building energy-use characteristics was used to develop appropriate EUI values for use at all Navy bases. A complete Navy base energy reconciliation process was also created for use in allocating all known energy consumption. Initial attempts to use total Navy base consumption values did not produce usable results. A parallel effort using individual building consumption data provided an estimating method that incorporated weather effects. This method produced a set of building EUI values and weather adjustments for use in estimating building energy use. A method of reconciling total site energy consumption was developed based on a {open_quotes}zero-sum{close_quotes} principle. This method provides a way to account for all energy use and apportion part or all of it to buildings and other energy uses when actual consumption is not known. The entire text of the manual was also revised to present a more easily read understood and usable document.

  4. Maintenance manual for the Beneficial Uses Shipping System cask. Revision 1

    SciTech Connect (OSTI)

    Bronowski, D.R.; Yoshimura, H.R.

    1993-05-01

    This document is the Maintenance Manual for the Beneficial Uses Shipping System (BUSS) cask. These instructions address requirements for maintenance, inspection, testing, and repair, supplementing general information found in the BUSS Safety Analysis Report for Packaging (SARP), SAND 83-0698. Use of the BUSS cask is authorized by the Department of Energy (DOE) and the Nuclear Regulatory Commission (NRC) for the shipment of special form cesium chloride or strontium flouride capsules.

  5. GARCON: Genetic Algorithm for Rectangular Cuts OptimizatioN. User's manual for version 2.0

    E-Print Network [OSTI]

    S. Abdullin; D. Acosta; P. Bartalini; R. Cavanaugh; A. Drozdetskiy; G. Karapostoli; G. Mitselmakher; Yu. Pakhotin; B. Scurlock; M. Spiropulu

    2006-05-17

    This paper presents GARCON program, illustrating its functionality on a simple HEP analysis example. The program automatically performs rectangular cuts optimization and verification for stability in a multi-dimensional phase space. The program has been successfully used by a number of very different analyses presented in the CMS Physics Technical Design Report. The current version GARCON 2.0 incorporates the feedback the authors have received. User's Manual is included as a part of the note.

  6. U.S. Department of Energy Vehicle Technologies Program: Battery Test Manual For Plug-In Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Jon P. Christophersen

    2014-09-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Renata M. Arsenault of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).

  7. FORIG: a computer code for calculating radionuclide generation and depletion in fusion and fission reactors. User's manual

    SciTech Connect (OSTI)

    Blink, J.A.

    1985-03-01

    In this manual we describe the use of the FORIG computer code to solve isotope-generation and depletion problems in fusion and fission reactors. FORIG runs on a Cray-1 computer and accepts more extensive activation cross sections than ORIGEN2 from which it was adapted. This report is an updated and a combined version of the previous ORIGEN2 and FORIG manuals. 7 refs., 15 figs., 13 tabs.

  8. GEO-SEQ Best Practices Manual. Geologic Carbon Dioxide Sequestration: Site Evaluation to Implementation

    SciTech Connect (OSTI)

    Benson, Sally M.; Myer, Larry R.; Oldenburg, Curtis M.; Doughty, Christine A.; Pruess, Karsten; Lewicki, Jennifer; Hoversten, Mike; Gasperikova, Erica; Daley, Thomas; Majer, Ernie; Lippmann, Marcelo; Tsang, Chin-Fu; Knauss, Kevin; Johnson, James; Foxall, William; Ramirez, Abe; Newmark, Robin; Cole, David; Phelps, Tommy J.; Parker, J.; Palumbo, A.; Horita, J.; Fisher, S.; Moline, Gerry; Orr, Lynn; Kovscek, Tony; Jessen, K.; Wang, Y.; Zhu, J.; Cakici, M.; Hovorka, Susan; Holtz, Mark; Sakurai, Shinichi; Gunter, Bill; Law, David; van der Meer, Bert

    2004-10-23

    The first phase of the GEO-SEQ project was a multidisciplinary effort focused on investigating ways to lower the cost and risk of geologic carbon sequestration. Through our research in the GEO-SEQ project, we have produced results that may be of interest to the wider geologic carbon sequestration community. However, much of the knowledge developed in GEO-SEQ is not easily accessible because it is dispersed in the peer-reviewed literature and conference proceedings in individual papers on specific topics. The purpose of this report is to present key GEO-SEQ findings relevant to the practical implementation of geologic carbon sequestration in the form of a Best Practices Manual. Because our work in GEO-SEQ focused on the characterization and project development aspects, the scope of this report covers practices prior to injection, referred to as the design phase. The design phase encompasses activities such as selecting sites for which enhanced recovery may be possible, evaluating CO{sub 2} capacity and sequestration feasibility, and designing and evaluating monitoring approaches. Through this Best Practices Manual, we have endeavored to place our GEO-SEQ findings in a practical context and format that will be useful to readers interested in project implementation. The overall objective of this Manual is to facilitate putting the findings of the GEO-SEQ project into practice.

  9. SERA: Simulation Environment for Radiotherapy Applications - Users Manual Version 1CO

    SciTech Connect (OSTI)

    Venhuizen, James Robert; Wessol, Daniel Edward; Wemple, Charles Alan; Wheeler, Floyd J; Harkin, G. J.; Frandsen, M. W.; Albright, C. L.; Cohen, M.T.; Rossmeier, M.; Cogliati, J.J.

    2002-06-01

    This document is the user manual for the Simulation Environment for Radiotherapy Applications (SERA) software program developed for boron-neutron capture therapy (BNCT) patient treatment planning by researchers at the Idaho National Engineering and Environmental Laboratory (INEEL) and students and faculty at Montana State University (MSU) Computer Science Department. This manual corresponds to the final release of the program, Version 1C0, developed to run under the RedHat Linux Operating System (version 7.2 or newer) or the Solaris™ Operating System (version 2.6 or newer). SERA is a suite of command line or interactively launched software modules, including graphical, geometric reconstruction, and execution interface modules for developing BNCT treatment plans. The program allows the user to develop geometric models of the patient as derived from Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) images, perform dose computation for these geometric models, and display the computed doses on overlays of the original images as three dimensional representations. This manual provides a guide to the practical use of SERA, but is not an exhaustive treatment of each feature of the code.

  10. Health physics manual of good practices for the prompt detection of airborne plutonium in the workplace

    SciTech Connect (OSTI)

    Not Available

    1988-07-01

    This manual provides guidance to US Department of Energy (DOE) facilities on the prompt detection of airborne plutonium in the workplace. Information is first given to aid in detection systems that will function effectively in various workplaces. Steps in designing a system are covered: its general requirements, the plotting of workplace sources of plutonium, and methods of determining workplace airflow patterns. Guidance is provided on the proper numbers and locations of probe sites, the orientation of probes for representative sampling, and the mixture of stationary and portable probes. Recommendations for delivery in sampling systems include examination of particle loss and self-absorption problems, methods of eliminating air leakage in the system, and optimization of decontamination capabilities. System flow rate, requirements in a collection medium, burial loss and pressure drop, and prudent frequency of renewing the collection medium are among air sampling considerations covered. After a discussion of controlling airflow and of vacuum sources and system backups, the checkpoints to ensure system reliability are listed. The manual then discusses instrument specifications that provide correct airborne plutonium concentrations and reliably activate alarms. Focusing on the interrelationship of all components, essential factors in instrument reliability are addressed: the regulatory lower limit of detection and performance specifications of detectors and filters, maintenance and calibration requirements, and features of commonly used plutonium air-sampling instruments. Finally, the manual advises on establishing a documentation program to archive and evaluate the performance of a plutonium air-sampling program.

  11. Department of Energy Manual 435.1-1 Waste Incidental To Reprocessing Determination For The West Valley Demonstration Project Concentrator Feed Makeup Tank and Melter Feed Hold Tank

    Broader source: Energy.gov [DOE]

    Department of Energy Manual 435.1-1 Waste Incidental To Reprocessing Determination For The West Valley Demonstration Project Concentrator Feed Makeup Tank and Melter Feed Hold Tank

  12. Information Privacy Policy & Procedure Manual Health Information Privacy Forms: 1 Copyright 2003 -2013. University of Florida. All rights reserved. Version: 09/01/2013

    E-Print Network [OSTI]

    Sin, Peter

    Information Privacy Policy & Procedure Manual Health Information Privacy Forms: 1 ©Copyright 2003 - 2013. University of Florida. All rights reserved. Version: 09/01/2013 ACUSE de Recibo MRN

  13. FUEL CONSERVATION BY THE APPLICATION OF SPILL PREVENTION AND FAILSAFE ENGINEERING (A GUIDELINE MANUAL)

    SciTech Connect (OSTI)

    Goodier,, J. L.; Siclari,, R. J.; Garrity,, P. A.

    1980-10-30

    From a series of nationwide plant surveys dedicated to spill prevention, containment and countermeasure evaluation, coupled with spill response action activities, a need was determined for a spill prevention guideline manual. From Federally accumulated statistics for oil and hazardous substance spills, the authors culled information on spills of hydrocarbon products. In 1978, a total of 1456 oil spills were reported compared to 1451 in 1979. The 1978 spills were more severe, however, since 7;289,163 gallons of oil were accident~y discharged. In 1979, the gallons spilled was reduced to 3,663,473. These figures are derived from reported spills; it is highly possible that an equal amount was spilled and not reported. Spills effectively contained within a plant property that do not enter a n~vigational waterway need not be reported. Needless to say, there is a tremendous annual loss of oil products due to accidental spillage during transportation, cargo transfer, bulk storage and processing. As an aid to plant engineers and managers, Fe~eral workers, fire marshalls and fire and casualty insurance inspectors, the documen~ is offered as a spill prevention guide. The'manual defines state-of-the-art spill prevention practices and automation techniques that can reduce spills caused by human error. Whenever practical, the cost of implementation is provided to aid equipment acquisition and installation budgeting. To emphasize the need for spill prevention activities, historic spills are briefly described after which remedial action is defined in an appropriate section of the manual. The section on plant security goes into considerable depth since to date no Federal agency or traqe association has provided industry with guidelines on this important phase of plant operation. The intent of the document is to provide finger-tip reference material that can be used by interested parties in a nationwide effort to reduce loss of oil from preventable spills.

  14. User's Manual for Data for Validating Models for PV Module Performance

    SciTech Connect (OSTI)

    Marion, W.; Anderberg, A.; Deline, C.; Glick, S.; Muller, M.; Perrin, G.; Rodriguez, J.; Rummel, S.; Terwilliger, K.; Silverman, T. J.

    2014-04-01

    This user's manual describes performance data measured for flat-plate photovoltaic (PV) modules installed in Cocoa, Florida, Eugene, Oregon, and Golden, Colorado. The data include PV module current-voltage curves and associated meteorological data for approximately one-year periods. These publicly available data are intended to facilitate the validation of existing models for predicting the performance of PV modules, and for the development of new and improved models. For comparing different modeling approaches, using these public data will provide transparency and more meaningful comparisons of the relative benefits.

  15. SRC-I demonstration plant analytical laboratory methods manual. Final technical report

    SciTech Connect (OSTI)

    Klusaritz, M.L.; Tewari, K.C.; Tiedge, W.F.; Skinner, R.W.; Znaimer, S.

    1983-03-01

    This manual is a compilation of analytical procedures required for operation of a Solvent-Refined Coal (SRC-I) demonstration or commercial plant. Each method reproduced in full includes a detailed procedure, a list of equipment and reagents, safety precautions, and, where possible, a precision statement. Procedures for the laboratory's environmental and industrial hygiene modules are not included. Required American Society for Testing and Materials (ASTM) methods are cited, and ICRC's suggested modifications to these methods for handling coal-derived products are provided.

  16. The Montana Rivers Information System: Edit/entry program user`s manual

    SciTech Connect (OSTI)

    Not Available

    1992-07-01

    The Montana Rivers Information System (MRIS) was initiated to assess the state`s fish, wildlife, and recreation value; and natural cultural and geologic features. The MRIS is now a set of data bases containing part of the information in the Natural Heritage Program natural features and threatened and endangered species data bases. The purpose of this User`s Manual is to: (1) describe to the user how to maintain the MRIS database of their choice by updating, changing, deleting, and adding records using the edit/entry programs; and (2) provide to the user all information and instructions necessary to complete data entry into the MRIS databases.

  17. New DOE IH Manual Chapter on Exposure Assessment | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirley Ann Jackson About1996How to ApplytheExecutive Summary InNew DOE IH Manual Chapter on Exposure

  18. IMPLEMENTATION MANUAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    requirement should be more flexible and will change the warranty requirements for solar photovoltaics to require: (1) that the output of the system be warranted at 80% of the...

  19. Implementation Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACT EVALUATION PLAN FOR THE SITE- SPECIFIC SAVINGSImpact ofThe Energy2:

  20. Implementation Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy,Impact Assessments Impact AssessmentsDecember »

  1. IMPLEMENTATION MANUAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHighHussein KhalilResearch8 IEEE TRANSACTIONSIII .. III A/

  2. Guidance manual for the identification of hazardous wastes delivered to publicly owned treatment works by truck, rail, or dedicated pipe

    SciTech Connect (OSTI)

    Not Available

    1987-06-01

    The manual is directed towards two types of facilities: First, guidance is to POTWs that wish to preclude the entry of hazardous wastes into their facilities and avoid regulation and liability under RCRA. Administrative/technical recommendations for control of such wastes is provided, many of which are already in use by POTWs. Second, the responsibilities of POTWs that choose to accept hazardous wastes from truck, rail, or dedicated pipeline are discussed, including relevant regulatory provisions, strict liability and corrective action requirements for releases, and recommended procedures for waste acceptance/management. The manual describes the RCRA regulatory status of wastes that POTW operators typically may encounter. The manual includes a Waste Monitoring Plan. Appendices give the following: RCRA lists; RCRA listed hazardous wastes; examples of POTW sewer use ordinance language, waste hauler permit; waste tracking form, notification of hazardous waste activity; uniform hazardous waste manifest; biennial hazardous waste report; and state hazardous waste contacts.

  3. Advanced Test Reactor Complex Facilities Radioactive Waste Management Basis and DOE Manual 435.1-1 Compliance Tables

    SciTech Connect (OSTI)

    Lisa Harvego; Brion Bennett

    2011-11-01

    U.S. Department of Energy Order 435.1, 'Radioactive Waste Management,' along with its associated manual and guidance, requires development and maintenance of a radioactive waste management basis for each radioactive waste management facility, operation, and activity. This document presents a radioactive waste management basis for Idaho National Laboratory's Advanced Test Reactor Complex facilities that manage radioactive waste. The radioactive waste management basis for a facility comprises existing laboratory-wide and facility-specific documents. U.S. Department of Energy Manual 435.1-1, 'Radioactive Waste Management Manual,' facility compliance tables also are presented for the facilities. The tables serve as a tool to develop the radioactive waste management basis.

  4. Spray Calciner/In-Can Melter high-level waste solidification technical manual

    SciTech Connect (OSTI)

    Larson, D.E. (ed.)

    1980-09-01

    This technical manual summarizes process and equipment technology developed at Pacific Northwest Laboratory over the last 20 years for vitrification of high-level liquid waste by the Spray Calciner/In-Can Melter process. Pacific Northwest Laboratory experience includes process development and demonstration in laboratory-, pilot-, and full-scale equipment using nonradioactive synthetic wastes. Also, laboratory- and pilot-scale process demonstrations have been conducted using actual high-level radioactive wastes. In the course of process development, more than 26 tonnes of borosilicate glass have been produced in 75 canisters. Four of these canisters contained radioactive waste glass. The associated process and glass chemistry is discussed. Technology areas described include calciner feed treatment and techniques, calcination, vitrification, off-gas treatment, glass containment (the canister), and waste glass chemistry. Areas of optimization and site-specific development that would be needed to adapt this base technology for specific plant application are indicated. A conceptual Spray Calciner/In-Can Melter system design and analyses are provided in the manual to assist prospective users in evaluating the process for plant application, to provide equipment design information, and to supply information for safety analyses and environmental reports. The base (generic) technology for the Spray Calciner/In-Can Melter process has been developed to a point at which it is ready for plant application.

  5. Design manual for management of solid by-products from advanced coal technologies

    SciTech Connect (OSTI)

    1994-10-01

    Developing coal conversion technologies face major obstacles in byproduct management. This project has developed several management strategies based on field trials of small-scale landfills in an earlier phase of the project, as well as on published/unpublished sources detailing regulatory issues, current industry practice, and reuse opportunities. Field testing, which forms the basis for several of the disposal alternatives presented in this design manual, was limited to byproducts from Ca-based dry SO{sub 2} control technologies, circulating fluidized bed combustion ash, and bubbling bed fluidized bed combustion ash. Data on byproducts from other advanced coal technologies and on reuse opportunities are drawn from other sources (citations following Chapter 3). Field results from the 5 test cases examined under this project, together with results from other ongoing research, provide a basis for predictive modeling of long-term performance of some advanced coal byproducts on exposure to ambient environment. This manual is intended to provide a reference database and development plan for designing, permitting, and operating facilities where advanced coal technology byproducts are managed.

  6. ACAA pavement manual. Recommended practice: Coal fly ash in pozzolanic stabilized mixtures for flexible pavement systems

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    The purpose of this manual is to guide pavement design engineers, materials engineers, and construction managers in the design and construction of flexible pavement systems in which low- to high-strength Pozzolanic Stabilized Mixtures' ( PSMs') serve as base layers. A PSM incorporates coal fly ash in combination with activators, aggregates and water. Each of three design methods is useful for determining the thickness of a PSM base layer for a flexible pavement system: Method A - American Association of State Highway and Transportation Officials (AASHTO) flexible pavement design procedures, using structural layer coefficients; Method B - Mechanistic pavement design procedures, using resilient modulus values for the pavement layers; and Method C - A combination of Method A and Method B, using mechanistic design concepts for determining pavement layer coefficients. PSMs offer several advantages: PSMs are strong, durable mixtures using locally available materials; PSMs are economically competitive with properly engineered full-depth asphalt or crushed stone base courses; PSMs are suited to stabilizing recycled base mixtures; and PSMs are placed and compacted with conventional construction equipment. To provide the needed guidance for capturing the long-term service and cost-saving features of a PSM design, this manual details the following: a procedure for proportioning PSMs; thickness design procedures which include base layer and asphalt wearing course; and proven techniques for PSM mixing and base layer construction.

  7. NetMOD Version 2.0 User?s Manual.

    SciTech Connect (OSTI)

    Merchant, Bion J.

    2015-10-01

    NetMOD ( Net work M onitoring for O ptimal D etection) is a Java-based software package for conducting simulation of seismic, hydracoustic, and infrasonic networks. Specifically, NetMOD simulates the detection capabilities of monitoring networks. Network simulations have long been used to study network resilience to station outages and to determine where additional stations are needed to reduce monitoring thresholds. NetMOD makes use of geophysical models to determine the source characteristics, signal attenuation along the path between the source and station, and the performance and noise properties of the station. These geophysical models are combined to simulate the relative amplitudes of signal and noise that are observed at each of the stations. From these signal-to-noise ratios (SNR), the probability of detection can be computed given a detection threshold. This manual describes how to configure and operate NetMOD to perform detection simulations. In addition, NetMOD is distributed with simulation datasets for the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO) International Monitoring System (IMS) seismic, hydroacoustic, and infrasonic networks for the purpose of demonstrating NetMOD's capabilities and providing user training. The tutorial sections of this manual use this dataset when describing how to perform the steps involved when running a simulation. ACKNOWLEDGEMENTS We would like to thank the reviewers of this document for their contributions.

  8. Sandia National Laboratories environmental fluid dynamics code. Marine Hydrokinetic Module User's Manual

    SciTech Connect (OSTI)

    James, Scott Carlton; Roberts, Jesse D.

    2014-03-01

    This document describes the marine hydrokinetic (MHK) input file and subroutines for the Sandia National Laboratories Environmental Fluid Dynamics Code (SNL-EFDC), which is a combined hydrodynamic, sediment transport, and water quality model based on the Environmental Fluid Dynamics Code (EFDC) developed by John Hamrick [1], formerly sponsored by the U.S. Environmental Protection Agency, and now maintained by Tetra Tech, Inc. SNL-EFDC has been previously enhanced with the incorporation of the SEDZLJ sediment dynamics model developed by Ziegler, Lick, and Jones [2-4]. SNL-EFDC has also been upgraded to more accurately simulate algae growth with specific application to optimizing biomass in an open-channel raceway for biofuels production [5]. A detailed description of the input file containing data describing the MHK device/array is provided, along with a description of the MHK FORTRAN routine. Both a theoretical description of the MHK dynamics as incorporated into SNL-EFDC and an explanation of the source code are provided. This user manual is meant to be used in conjunction with the original EFDC [6] and sediment dynamics SNL-EFDC manuals [7]. Through this document, the authors provide information for users who wish to model the effects of an MHK device (or array of devices) on a flow system with EFDC and who also seek a clear understanding of the source code, which is available from staff in the Water Power Technologies Department at Sandia National Laboratories, Albuquerque, New Mexico.

  9. Course Materials Fees policy -http://manuals.ucdavis.edu/ppm/330/330-86.htm College/School Department Course Title Fee Expires

    E-Print Network [OSTI]

    Ishida, Yuko

    Course Materials Fees policy - http://manuals.ucdavis.edu/ppm/330/330-86.htm College MATERIALS FEES Course Budget and Institutional Analysis 1 3/9/2012 CMSF Effective Fall 2011 MASTER FOR WEB SITE.xlsx #12;Course Materials Fees policy - http://manuals.ucdavis.edu/ppm/330/330-86.htm College

  10. SUBJECT: Laser Safety Program Purpose: The purpose of this Laser Safety Manual is to insure the safe use of lasers in

    E-Print Network [OSTI]

    SUBJECT: Laser Safety Program Purpose: The purpose of this Laser Safety Manual is to insure the safe use of lasers in research activities at the Colorado School of Mines (Mines or the School). This Laser Safety Manual outlines laser registration requirements, identifies hazards associated with using

  11. Part XI. University of North Carolina Policy Manual and the UNC Code As a constituent institution of the University of North Carolina, East Carolina University is subject to

    E-Print Network [OSTI]

    Gopalakrishnan, K.

    Part XI. University of North Carolina Policy Manual and the UNC Code As a constituent institution of the University of North Carolina, East Carolina University is subject to the policies in the University of North Carolina Policy Manual, which contains the Code of the Board of Governors of the University of North

  12. VPN for Android (4.x) at TU Delft This manual explains how to connect your Android device (Android 4.x -ARM and Intel Android) to

    E-Print Network [OSTI]

    van Vliet, Lucas J.

    VPN for Android (4.x) at TU Delft This manual explains how to connect your Android device (Android 4.x - ARM and Intel Android) to the TU Delft VPN-servers. Note this manual is as is, officially there is no support for Android devices at TU Delft. We recommend to install Anyconnect ICS+, a Cisco VPN Client

  13. HGP-A Wellhead Generator, Proof-Of-Feasibility Project 3 MW Wellhead Generator, Start-Up Training and Operating Manual

    SciTech Connect (OSTI)

    1981-01-01

    The start-up manual is an information aid to initially familiarize plant operators with the plant operation and later be used as a reference manual while operating the plant. This start-up manual is supplemented by the Plant Data Manual which contains a detailed description of the philosophy of operation and equipment characteristics. The sequencing herein presents the necessary operating procedures which must be followed in order that a smooth start-up is obtained. The sequence includes, first conditioning the well and stabilizing the steam/water separations, and then bringing the operating machinery on line. The Piping and Instrumentation Diagrams and Electrical Drawings are included under Section 12.0 and are frequently referred to in the text. Information for ''trouble-shooting'' is provided in the maintenance and operations manuals on all the equipment.

  14. Enahancing the Use of Coals by Gas Reburning - Sorbent Injection Volume 5 - Guideline Manual

    SciTech Connect (OSTI)

    1998-09-01

    The purpose of the Guideline Manual is to provide recommendations for the application of combined gas reburning-sorbent injection (GR-SI) technologies to pre-NSPS boilers. The manual includes design recommendations, performance predictions, economic projections and comparisons with competing technologies. The report also includes an assessment of boiler impacts. Two full-scale demonstrations of gas reburning-sorbent injection form the basis of the Guideline Manual. Under the U.S. Department of Energy's Clean Coal Technology Program (Round 1), a project was completed to demonstrate control of boiler emissions that comprise acid rain precursors, specifically oxides of nitrogen (NOX) and sulfur dioxide (S02). Other project sponsors were the Gas Research Institute and the Illinois State Department of Commerce and Community Affairs. The project involved demonstrating the combined use of Gas Reburning and Sorbent Injection (GR-SI) to assess the air emissions reduction potential of these technologies.. Three potential coal-fired utility boiler host sites were evaluated: Illinois Power's tangentially-fired 71 MWe (net) Hennepin Unit W, City Water Light and Power's cyclone- fired 33 MWe (gross) Lakeside Unit #7, and Central Illinois Light Company's wall-fired 117 MWe (net) Edwards Unit #1. Commercial demonstrations were completed on the Hennepin and Lakeside Units. The Edwards Unit was removed from consideration for a site demonstration due to retrofit cost considerations. Gas Reburning (GR) controls air emissions of NOX. Natural gas is introduced into the furnace hot flue gas creating a reducing reburning zone to convert NOX to diatomic nitrogen (N,). Overfire air is injected into the furnace above the reburning zone to complete the combustion of the reducing (fuel) gases created in the reburning zone. Sorbent Injection (S1) consists of the injection of dry, calcium-based sorbents into furnace hot flue gas to achieve S02 capture. At each site where the techno!o@es were to be demonstrated, petiormance goals were set to achieve air emission reductions of 60 percent for NO. and 50 percent for SO2. These performance goals were exceeded during long term demonstration testing. For the tangentially fired unit, NOX emissions were reduced by 67.2% and S02 emissions by 52.6%. For the cyclone-fired unit, NOX emissions were reduced by 62.9% and SOZ emissions by 57.9%.

  15. Enhancing the Use of Coals by Gas Reburning - Sorbent Injection Volume 5 - Guideline Manual

    SciTech Connect (OSTI)

    1998-06-01

    The purpose of the Guideline Manual is to provide recommendations for the application of combined gas reburning-sorbent injection (GR-SI) technologies to pre-NSPS boilers. The manual includes design recommendations, performance predictions, economic projections and comparisons with competing technologies. The report also includes an assessment of boiler impacts. Two full-scale demonstrations of gas reburning-sorbent injection form the basis of the Guideline Manual. Under the U.S. Department of Energy's Clean Coal Technology Program (Round 1), a project was completed to demonstrate control of boiler emissions that comprise acid rain precursors, specifically oxides of nitrogen (NOX) and sulfur dioxide (S02). Other project sponsors were the Gas Research Institute and the Illinois State Department of Commerce and Community Affairs. The project involved d,emonstrating the combined use of Gas Reburning and Sorbent Injection (GR-SI) to assess the air emissions reduction potential of these technologies.. Three potential coal-fired utility boiler host sites were evaluated: Illinois Power's tangentially-fired 71 MWe (net) Hennepin Unit #1, City Water Light and Power's cyclone- fired 33 MWe (gross) Lakeside Unit #7, and Central Illinois Light Company's wall-fired 117 MWe (net) Edwards Unit #1. Commercial demonstrations were completed on the Hennepin and Lakeside Units. The Edwards Unit was removed from consideration for a site demonstration due to retrofit cost considerations. Gas Reburning (GR) controls air emissions of NOX. Natural gas is introduced into the furnace hot flue gas creating a reducing reburning zone to convert NOX to diatomic nitrogen (N,). Overfire air is injected into the furnace above the reburning zone to complete the combustion of the reducing (fuel) gases created in the reburning zone. Sorbent Injection (S1) consists of the injection of dry, calcium-based sorbents into furnace hot flue gas to achieve S02 capture. `At each site where the technologies were to be demonstrated, performance goals were set to achieve air emission reductions of 60 percent for NOX and 50 percent for S02. These performance goals were exceeded during long term demonstration testing. For the tangentially fired unit, NO, emissions were reduced by 67.2?40 and SOZ emissions by 52.6Y0. For the cyclone-fired unit, NO, emissions were reduced by 62.9% and SOZ emissions by 57.9Y0.

  16. For the proper use of the instrument, be sure to read this instruction manual. Even after you

    E-Print Network [OSTI]

    Skemer, Philip

    for maintenance of the instrument performance are available for seven years from the date of installationFor the proper use of the instrument, be sure to read this instruction manual. Even after you read-1 XM-17410 SPECIMEN DECONVOLUTION PROGRAM #12;XM-17410-1 NOTICE · This instrument must not be modified

  17. For the proper use of the instrument, be sure to read this instruction manual. Even after you

    E-Print Network [OSTI]

    Skemer, Philip

    of the instrument performance are available for seven years from the date of installation. Thereafter, some of thoseFor the proper use of the instrument, be sure to read this instruction manual. Even after you read PHASE ANALYSIS PROGRAM #12;XM-17530-1 NOTICE · This instrument must not be modified, and products other

  18. For the proper use of the instrument, be sure to read this instruction manual. Even after you

    E-Print Network [OSTI]

    Skemer, Philip

    for maintenance of the instrument performance are available for seven years from the date of installationFor the proper use of the instrument, be sure to read this instruction manual. Even after you read-17560-1 XM-17560 AUTOMATIC PARTICLE ANALYSIS PROGRAM #12;XM-17560-1 NOTICE · This instrument must

  19. For the proper use of the instrument, be sure to read this instruction manual. Even after you

    E-Print Network [OSTI]

    Skemer, Philip

    For the proper use of the instrument, be sure to read this instruction manual. Even after you read ELECTRON GUN #12;XM-10110-1 NOTICE · This instrument must not be modified, and products other than those manufac- tured by JEOL Ltd. must not be attached to this instrument, without prior writ- ten permission

  20. For the proper use of the instrument, be sure to read this instruction manual. Even after you

    E-Print Network [OSTI]

    Skemer, Philip

    for maintenance of the instrument performance are available for seven years from the date of installationFor the proper use of the instrument, be sure to read this instruction manual. Even after you read-17520 ELEMENT RATIO MAP PROGRAM #12;XM-17520-1 NOTICE · This instrument must not be modified