Powered by Deep Web Technologies
Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Integrated Project Management System description  

SciTech Connect (OSTI)

The Integrated Program Management System (IPMS) Description is a ``working`` document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ``why`` and ``what is expected`` is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately.

NONE

1994-09-01T23:59:59.000Z

2

1993 baseline solid waste management system description  

SciTech Connect (OSTI)

Pacific Northwest Laboratory has prepared this report under the direction of Westinghouse Hanford Company. The report provides an integrated description of the system planned for managing Hanford`s solid low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. The primary purpose of this document is to illustrate a collective view of the key functions planned at the Hanford Site to handle existing waste inventories, as well as solid wastes that will be generated in the future. By viewing this system as a whole rather than as individual projects, key facility interactions and requirements are identified and a better understanding of the overall system may be gained. The system is described so as to form a basis for modeling the system at various levels of detail. Model results provide insight into issues such as facility capacity requirements, alternative system operating strategies, and impacts of system changes (ie., startup dates). This description of the planned Hanford solid waste processing system: defines a baseline system configuration; identifies the entering waste streams to be managed within the system; identifies basic system functions and waste flows; and highlights system constraints. This system description will evolve and be revised as issues are resolved, planning decisions are made, additional data are collected, and assumptions are tested and changed. Out of necessity, this document will also be revised and updated so that a documented system description, which reflects current system planning, is always available for use by engineers and managers. It does not provide any results generated from the many alternatives that will be modeled in the course of analyzing solid waste disposal options; such results will be provided in separate documents.

Armacost, L.L.; Fowler, R.A.; Konynenbelt, H.S.

1994-02-01T23:59:59.000Z

3

Conceptual modular description of the high-level waste management system for system studies model development  

SciTech Connect (OSTI)

This document presents modular descriptions of possible alternative components of the federal high-level radioactive waste management system and the procedures for combining these modules to obtain descriptions for alternative configurations of that system. The 20 separate system component modules presented here can be combined to obtain a description of any of the 17 alternative system configurations (i.e., scenarios) that were evaluated in the MRS Systems Studies program (DOE 1989a). First-approximation descriptions of other yet-undefined system configurations could also be developed for system study purposes from this database. The descriptions include, in a modular format, both functional descriptions of the processes in the waste management system, plus physical descriptions of the equipment and facilities necessary for performance of those functions.

McKee, R.W.; Young, J.R.; Konzek, G.J.

1992-08-01T23:59:59.000Z

4

WRAP Module 1 data management system (DMS) software design description (SDD)  

SciTech Connect (OSTI)

The Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) System Design Description (SDD) describes the logical and physical architecture of the system. The WRAP 1 DMS SDD formally partitions the elements of the system described in the WRAP 1 DMS Software requirements specification into design objects and describes the key properties and relationships among the design objects and interfaces with external systems such as the WRAP Plant Control System (PCS). The WRAP 1 DMS SDD can be thought of as a detailed blueprint for implementation activities. The design descriptions contained within this document will describe, in detail, the software products that will be developed to assist the Project W-026, Waste Receiving and Processing Module 1, in their management functions. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility.

Talmage, P.A.

1995-03-17T23:59:59.000Z

5

PPPL Project Management System Page 1 of 111 PPPL Project Management System Description Rev-01  

E-Print Network [OSTI]

by Princeton University for the U.S. Department of Energy Thomas Egebo Digitally signed by Thomas Egebo DN: cn Program Description". Revised to incorporate corrective actions to resolve findings in Audit #1004

Princeton Plasma Physics Laboratory

6

WRAP Module 1 data management system (DMS) software design description (SDD)  

SciTech Connect (OSTI)

Revision 2 of the Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) Preliminary Software Design Description (PSDD) provides a high-level design description of the system. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility. The WRAP 1 DMS SDD is used as the primary medium for communication software design information. This release provides design descriptions for the following process modules produced under Phase 1 of the development effort: Receiving Drum or Box Containers Process Routing and Picklists; Waste Inventory by Location and/or Container Relationships; LLW Process Glovebox Facility Radiologic Material Inventory Check (partial); Shipping (partial production); Drum or Box NDE Operations; and Drum or Box NDA Operations Data Review (partial production). In addition, design descriptions are included for the following process modules scheduled for development under Phases 2 and 3: Activity Comment; LLW RWM Glovebox Sample Management; TRU Process Glovebox; TRU RWM Glovebox; and TRUPACT Processing. Detailed design descriptions for Reports and Facility Metrics have also been provided for in Revision 2 of this document.

Weidert, J.R. [Westinghouse Hanford Co., Richland, WA (United States)

1996-05-13T23:59:59.000Z

7

Mining Building Energy Management System Data Using Fuzzy Anomaly Detection and Linguistic Descriptions  

SciTech Connect (OSTI)

Building Energy Management Systems (BEMSs) are essential components of modern buildings that utilize digital control technologies to minimize energy consumption while maintaining high levels of occupant comfort. However, BEMSs can only achieve these energy savings when properly tuned and controlled. Since indoor environment is dependent on uncertain criteria such as weather, occupancy, and thermal state, performance of BEMS can be sub-optimal at times. Unfortunately, the complexity of BEMS control mechanism, the large amount of data available and inter-relations between the data can make identifying these sub-optimal behaviors difficult. This paper proposes a novel Fuzzy Anomaly Detection and Linguistic Description (Fuzzy-ADLD) based method for improving the understandability of BEMS behavior for improved state-awareness. The presented method is composed of two main parts: 1) detection of anomalous BEMS behavior and 2) linguistic representation of BEMS behavior. The first part utilizes modified nearest neighbor clustering algorithm and fuzzy logic rule extraction technique to build a model of normal BEMS behavior. The second part of the presented method computes the most relevant linguistic description of the identified anomalies. The presented Fuzzy-ADLD method was applied to real-world BEMS system and compared against a traditional alarm based BEMS. In six different scenarios, the Fuzzy-ADLD method identified anomalous behavior either as fast as or faster (an hour or more), that the alarm based BEMS. In addition, the Fuzzy-ADLD method identified cases that were missed by the alarm based system, demonstrating potential for increased state-awareness of abnormal building behavior.

Dumidu Wijayasekara; Ondrej Linda; Milos Manic; Craig Rieger

2014-08-01T23:59:59.000Z

8

GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.  

SciTech Connect (OSTI)

THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

2002-05-31T23:59:59.000Z

9

Assistant Director, Prospect Management Description  

E-Print Network [OSTI]

and to the Prospect Management Data Wranglers to assist their efforts in improving the quality of Prospect Management Management · Enter and monitor prospect assignments and new prospect records requests. · Monitor data quality of all functions and systems related to prospect management, including software applications, industry

Portman, Douglas

10

Project Manager, TBD Job Description Questionnaire (JDQ)  

E-Print Network [OSTI]

Project Manager, TBD Job Description Questionnaire (JDQ) Professional Staff Instructions What with a disability in regard to job application procedures, the hiring or discharge of employees, employee Below to Certify Approval or Disapproval: Approval Disapproval ( ) ( ) TBD, Project Manager

Barrash, Warren

11

West Valley transfer cart control system design description. Environmental Restoration and Waste Management Program  

SciTech Connect (OSTI)

Detail design of the control system for the West Valley Nuclear Services Vitrification Facility transfer cart has been completed by Oak Ridge National Laboratory. This report documents the requirements and describes the detail design of that equipment and control software. Copies of significant design documents including analysis and testing reports and design drawings are included in the Appendixes.

Bradley, E.C.; Crutcher, R.I.; Halliwell, J.W.; Hileman, M.S.; Moore, M.R.; Nodine, R.N.; Ruppel, F.R.; Vandermolen, R.I.

1993-01-01T23:59:59.000Z

12

The Description of Large Systems  

E-Print Network [OSTI]

In this paper we discuss the problems associated with the description and manipulation of large systems when their sources are not maintained as single fields. We show why and how tools that address these issues, such ...

Pitman, Kent

1984-09-01T23:59:59.000Z

13

Waste receiving and processing plant control system; system design description  

SciTech Connect (OSTI)

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

LANE, M.P.

1999-02-24T23:59:59.000Z

14

HIERARCHICAL MANAGEMENT OF BATTLEFIELD NETWORKS WITH THE SHAMAN MANAGEMENT SYSTEM  

E-Print Network [OSTI]

HIERARCHICAL MANAGEMENT OF BATTLEFIELD NETWORKS WITH THE SHAMAN MANAGEMENT SYSTEM Adarshpal S with a description of the SHAMAN system and briefly introduces its applica- tions to the management of tactical for MANagement). This management system developed at the Network Management Laboratory of the Univer- sity

Sethi, Adarshpal

15

LRRB Pavement Management Systems Pavement Management Systems  

E-Print Network [OSTI]

LRRB Pavement Management Systems Pavement Management Systems Presented by: Michael Marti SRF for implementing and monitoring research results (RIC) #12;LRRB Pavement Management Systems LRRB Structure LRRB Current Pavement Management System Used ICON (Goodpointe) Year of Pavement Management System

Minnesota, University of

16

System design description cone penetrometer system  

SciTech Connect (OSTI)

The system design description documents in detail the design of the cone penetrometer system. The systems includes the cone penetrometer physical package, raman spectroscopy package and moisture sensor package. Information pertinent to the system design, development, fabrication and testing is provided.

Seda, R.Y., Westinghouse Hanford

1996-08-12T23:59:59.000Z

17

SNF AGING SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of procedures that will be used to operate the system.

L.L. Swanson

2005-04-06T23:59:59.000Z

18

ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

S. Roy

2004-06-24T23:59:59.000Z

19

ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

M. Maniyar

2004-06-22T23:59:59.000Z

20

Waste management project technical baseline description  

SciTech Connect (OSTI)

A systems engineering approach has been taken to describe the technical baseline under which the Waste Management Project is currently operating. The document contains a mission analysis, function analysis, requirement analysis, interface definitions, alternative analysis, system definition, documentation requirements, implementation definitions, and discussion of uncertainties facing the Project.

Sederburg, J.P.

1997-08-13T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Standard-C hydrogen monitoring system, system design description  

SciTech Connect (OSTI)

Standard-C cabinet arrangement system design description for the Standard Hydrogen Monitoring System.

Schneider, T.C., Westinghouse Hanford

1996-08-29T23:59:59.000Z

22

NDMAS System and Process Description  

SciTech Connect (OSTI)

Experimental data generated by the Very High Temperature Reactor Program need to be more available to users in the form of data tables on Web pages that can be downloaded to Excel or in delimited text formats that can be used directly for input to analysis and simulation codes, statistical packages, and graphics software. One solution that can provide current and future researchers with direct access to the data they need, while complying with records management requirements, is the Nuclear Data Management and Analysis System (NDMAS). This report describes the NDMAS system and its components, defines roles and responsibilities, describes the functions the system performs, describes the internal processes the NDMAS team uses to carry out the mission, and describes the hardware and software used to meet Very High Temperature Reactor Program needs.

Larry Hull

2012-10-01T23:59:59.000Z

23

Object Management Systems  

E-Print Network [OSTI]

Object-Oriented Database Management Systems for EngineeringR. Cassel. Distribution Management Systems: Functions and8-PWR 1988. Network Management Systems 52 Subodh Bapat.

Gollu, Aleks Ohannes

1995-01-01T23:59:59.000Z

24

Environmental Management System Plan  

E-Print Network [OSTI]

R-3 • Environmental Management System Plan References 30.of Energy, Safety Management System Policy, DOE P 450.4 (E), Environmental Management Systems ? Requirements with

Fox, Robert

2009-01-01T23:59:59.000Z

25

Project Management Plan Resident Management System (RMS)  

E-Print Network [OSTI]

1 Project Management Plan Resident Management System (RMS) And Quality Control System (QCS Resident Management System.........................................................................................................3 Project Management Plan - Purpose

US Army Corps of Engineers

26

Landscape Management Systems The Visual Management System  

E-Print Network [OSTI]

Landscape Management Systems The Visual Management System of the Forest Service, USDA1 Warren R presentation on how the Visual Management System (VMS) functions. 1/ Presented at the National Conference Manual 2380, Landscape Management, USDA. INTRODUCTION The American people are concerned about the quality

Standiford, Richard B.

27

Viticulture Instructor / Vineyard Manager Job Description  

E-Print Network [OSTI]

as one course during the summer - teaching workshops may count as partial credit-hour teaching load. 5 this position includes a teaching load of approximately 8-9 credits per semester and one course during summer management, spray scheduling, crop load management, and coordinate with HCC Winery regarding harvest

28

Environmental Management System Plan  

E-Print Network [OSTI]

Management Program, R-3 • Environmental Management SystemEnvironmental policy 3. Environmental aspects 4. Legal andObjectives, targets, and Environmental Management Programs

Fox, Robert

2009-01-01T23:59:59.000Z

29

CIS 330: Database Management Systems Course Number & Title (A.1) CIS 330: Database Management Systems  

E-Print Network [OSTI]

CIS 330: Database Management Systems Course Number & Title (A.1) CIS 330: Database Management & Johannes Gehrke, Database Management Systems (third edition), McGraw Hill. Additional materials as handouts, e.g., research papers Catalog Description (A.5a) Introduction to database management systems

Plotkin, Joshua B.

30

CANISTER TRANSFER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Canister Transfer System receives transportation casks containing large and small disposable canisters, unloads the canisters from the casks, stores the canisters as required, loads them into disposal containers (DCs), and prepares the empty casks for re-shipment. Cask unloading begins with cask inspection, sampling, and lid bolt removal operations. The cask lids are removed and the canisters are unloaded. Small canisters are loaded directly into a DC, or are stored until enough canisters are available to fill a DC. Large canisters are loaded directly into a DC. Transportation casks and related components are decontaminated as required, and empty casks are prepared for re-shipment. One independent, remotely operated canister transfer line is provided in the Waste Handling Building System. The canister transfer line consists of a Cask Transport System, Cask Preparation System, Canister Handling System, Disposal Container Transport System, an off-normal canister handling cell with a transfer tunnel connecting the two cells, and Control and Tracking System. The Canister Transfer System operating sequence begins with moving transportation casks to the cask preparation area with the Cask Transport System. The Cask Preparation System prepares the cask for unloading and consists of cask preparation manipulator, cask inspection and sampling equipment, and decontamination equipment. The Canister Handling System unloads the canister(s) and places them into a DC. Handling equipment consists of a bridge crane hoist, DC loading manipulator, lifting fixtures, and small canister staging racks. Once the cask has been unloaded, the Cask Preparation System decontaminates the cask exterior and returns it to the Carrier/Cask Handling System via the Cask Transport System. After the DC is fully loaded, the Disposal Container Transport System moves the DC to the Disposal Container Handling System for welding. To handle off-normal canisters, a separate off-normal canister handling cell is located adjacent to the canister transfer cell and is interconnected to the transfer cell by means of the off-normal canister transfer tunnel. All canister transfer operations are controlled by the Control and Tracking System. The system interfaces with the Carrier/Cask Handling System for incoming and outgoing transportation casks. The system also interfaces with the Disposal Container Handling System, which prepares the DC for loading and subsequently seals the loaded DC. The system support interfaces are the Waste Handling Building System and other internal Waste Handling Building (WHB) support systems.

B. Gorpani

2000-06-23T23:59:59.000Z

31

ASSEMBLY TRANSFER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Assembly Transfer System (ATS) receives, cools, and opens rail and truck transportation casks from the Carrier/Cask Handling System (CCHS). The system unloads transportation casks consisting of bare Spent Nuclear Fuel (SNF) assemblies, single element canisters, and Dual Purpose Canisters (DPCs). For casks containing DPCs, the system opens the DPCs and unloads the SNF. The system stages the assemblies, transfer assemblies to and from fuel-blending inventory pools, loads them into Disposal Containers (DCs), temporarily seals and inerts the DC, decontaminates the DC and transfers it to the Disposal Container Handling System. The system also prepares empty casks and DPCs for off-site shipment. Two identical Assembly Transfer System lines are provided in the Waste Handling Building (WHB). Each line operates independently to handle the waste transfer throughput and to support maintenance operations. Each system line primarily consists of wet and dry handling areas. The wet handling area includes a cask transport system, cask and DPC preparation system, and a wet assembly handling system. The basket transport system forms the transition between the wet and dry handling areas. The dry handling area includes the dry assembly handling system, assembly drying system, DC preparation system, and DC transport system. Both the wet and dry handling areas are controlled by the control and tracking system. The system operating sequence begins with moving transportation casks to the cask preparation area. The cask preparation operations consist of cask cavity gas sampling, cask venting, cask cool-down, outer lid removal, and inner shield plug lifting fixture attachment. Casks containing bare SNF (no DPC) are filled with water and placed in the cask unloading pool. The inner shield plugs are removed underwater. For casks containing a DPC, the cask lid(s) is removed, and the DPC is penetrated, sampled, vented, and cooled. A DPC lifting fixture is attached and the cask is placed into the cask unloading pool. In the cask unloading pool the DPC is removed from the cask and placed in an overpack and the DPC lid is severed and removed. Assemblies are removed from either an open cask or DPC and loaded into assembly baskets positioned in the basket staging rack in the assembly unloading pool. A method called ''blending'' is utilized to load DCs with a heat output of less than 11.8 kW. This involves combining hotter and cooler assemblies from different baskets. Blending requires storing some of the hotter fuel assemblies in fuel-blending inventory pools until cooler assemblies are available. The assembly baskets are then transferred from the basket staging rack to the assembly handling cell and loaded into the assembly drying vessels. After drying, the assemblies are removed from the assembly drying vessels and loaded into a DC positioned below the DC load port. After installation of a DC inner lid and temporary sealing device, the DC is transferred to the DC decontamination cell where the top area of the DC, the DC lifting collar, and the DC inner lid and temporary sealing device are decontaminated, and the DC is evacuated and backfilled with inert gas to prevent prolonged clad exposure to air. The DC is then transferred to the Disposal Container Handling System for lid welding. In another cask preparation and decontamination area, lids are replaced on the empty transportation casks and DPC overpacks, the casks and DPC overpacks are decontaminated, inspected, and transferred to the Carrier/Cask Handling System for shipment off-site. All system equipment is designed to facilitate manual or remote operation, decontamination, and maintenance. The system interfaces with the Carrier/Cask Handling System for incoming and outgoing transportation casks and DPCs. The system also interfaces with the Disposal Container Handling System, which prepares the DC for loading and subsequently seals the loaded DC. The system support interfaces are the Waste Handling Building System and other internal WHB support systems.

B. Gorpani

2000-06-26T23:59:59.000Z

32

Automatic TLI recognition system, general description  

SciTech Connect (OSTI)

This report is a general description of an automatic target recognition system developed at the Idaho National Engineering Laboratory for the Department of Energy. A user`s manual is a separate volume, Automatic TLI Recognition System, User`s Guide, and a programmer`s manual is Automatic TLI Recognition System, Programmer`s Guide. This system was designed as an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system naturally incorporates image data fusion, and it gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. In addition to its primary function as a trainable target recognition system, this is also a versatile, general-purpose tool for image manipulation and analysis, which can be either keyboard-driven or script-driven. This report includes descriptions of three variants of the computer hardware, a description of the mathematical basis if the training process, and a description with examples of the system capabilities.

Lassahn, G.D.

1997-02-01T23:59:59.000Z

33

SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

M.M. Ansari

2005-04-05T23:59:59.000Z

34

Position Description Project Manager, Office of Community and Economic Development  

E-Print Network [OSTI]

Position Description Project Manager, Office of Community and Economic Development Full will support all aspects of the success of CSU's Office of Community and Economic Development projects from to the Director and Assistant Director of the Community and Economic Development Office of Colorado State

35

EES 110: Earth Systems Course Description  

E-Print Network [OSTI]

of energy come from? The course includes laboratory exercises that cover map reading skills, rockEES 110: Earth Systems Course Description: This course examines some of the basic processes (held during normal laboratory meeting times): 1. Rocks & Minerals of Upstate SC: A chance to explore

36

Operating System Resource Management  

E-Print Network [OSTI]

Operating System Resource Management Date: Monday, September 27, 2010 Time: 2:00 ­ 3:00 pm Location constrained. This talk will propose a scheme for addressing the operating system resource management problem Sciences Seminar Series presents Pacific Northwest National Laboratory Resource management is the dynamic

37

Automatic TLI recognition system. Part 1: System description  

SciTech Connect (OSTI)

This report describes an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system uses image data fusion and gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. This volume gives a general description of the ATR system.

Partin, J.K.; Lassahn, G.D.; Davidson, J.R.

1994-05-01T23:59:59.000Z

38

Computerized Maintenance Management Systems  

Broader source: Energy.gov [DOE]

Computerized maintenance management systems (CMMS) are a type of management software that perform functions in support of operations and maintenance (O&M) programs. The software automates most of the logistical functions performed by O&M staff.

39

Environmental Management Systems (Iowa)  

Broader source: Energy.gov [DOE]

A solid waste planning area (e.g., the land encompassed by a municipality with a comprehensive solid waste management policy) may qualify to be an Environmental Management System if it provides...

40

Energy Management Systems  

E-Print Network [OSTI]

This presentation will address results from a pilot project with 10 chemical plants on energy management systems and the development of an energy efficiency plant certification program....

Ferland, K.

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Comprehensive Emergency Management System  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Order establishes policy and assigns roles and responsibilities for the Department of Energy (DOE) Emergency Management System. Cancels DOE O 151.1B.

2005-11-02T23:59:59.000Z

42

207-A retention basins system design description  

SciTech Connect (OSTI)

The 242-A Evaporator is a waste treatment facility designed to reduce liquid waste volumes currently stored in the Hanford Area double shell Waste Storage Tanks. The evaporator uses evaporative concentration to achieve this volume reduction, returning the concentrated slurry to the double-shell tanks for storage. The process effluent is transferred to various retention/treatment facilities for eventual release to the environment. The process utilizes an evaporator vessel and various supporting systems for heating, evaporating, and condensing low-heat-generating liquid waste produced it the Hanford Site. The process reduces the total volume of the liquid waste requiring storage in a double shell tank, making it more manageable for current storage as well as for future treatment and disposal. The main components of the 242-A Evaporator are the Reboiler, Vapor-Liquid Separator, Recirculation Pump and Pump Loop, Slurry System, Condenser System, Steam Jet Vacuum System, Condensate Collection Tank, and Ion Exchange System.

Wahlquist, R.A.

1994-09-29T23:59:59.000Z

43

Comprehensive Emergency Management System  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish policy and to assign and describe roles and responsibilities for the Department of Energy (DOE) Emergency Management System. The Emergency Management System provides the framework for development, coordination, control, and direction of all emergency planning, preparedness, readiness assurance, response, and recovery actions. Canceled by DOE O 151.1B. Cancels DOE O 151.1.

2000-11-01T23:59:59.000Z

44

Lithium battery management system  

DOE Patents [OSTI]

Provided is a system for managing a lithium battery system having a plurality of cells. The battery system comprises a variable-resistance element electrically connected to a cell and located proximate a portion of the cell; and a device for determining, utilizing the variable-resistance element, whether the temperature of the cell has exceeded a predetermined threshold. A method of managing the temperature of a lithium battery system is also included.

Dougherty, Thomas J. (Waukesha, WI)

2012-05-08T23:59:59.000Z

45

Managing the Management: CORBAbased Instrumentation of Management Systems  

E-Print Network [OSTI]

Managing the Management: CORBA­based Instrumentation of Management Systems A. Keller Munich Network to dynamically exchange customer­ and technology­related data. In this context, management systems are crucial providers: On the one hand, different service providers have chosen different management systems

46

System description of the Repository-Only System for the FY 1990 systems integration program studies. [CONTAINS GLOSSARY  

SciTech Connect (OSTI)

This document provides both functional and physical descriptions of a conceptual high-level waste management system defined as a Repository-Only System. Its purpose is to provide a basis for required system computer modeling and system studies initiated in FY 1990 under the Systems Integration Program of the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM). The Repository-Only System is designed to accept 3000 MTU per year of spent fuel and 400 equivalent MTU per year of high-level wastes disposal in the geologic repository. This document contains both functional descriptions of the processes in the waste management system and physical descriptions of the equipment and facilities necessary for performance of those processes. These descriptions contain the level of detail needed for the projected systems analysis studies. The Repository-Only System contains all system components, from the waste storage facilities of the waste generators to the underground facilities for final disposal of the wastes. The major facilities in the system are the waste generator waste storage facilities, a repository facility that packages the wastes and than emplaces them in the geologic repository, and the transportation equipment and facilities for transporting the wastes between these major facilities. 18 refs., 39 figs.

McKee, R.W.; Young, J.R.; Konzek, G.J.

1991-07-01T23:59:59.000Z

47

Home energy rating systems: Program descriptions  

SciTech Connect (OSTI)

This report contains the descriptions of home energy rating and labelling programs (HERS) that were surveyed in January 1986 as part of a national evaluation of HERS.

Vine, E.; Barnes, B.K.; Ritschard, R.

1987-02-01T23:59:59.000Z

48

System design description 241-SY-101 color video camera  

SciTech Connect (OSTI)

This System Design Description describes the major components of the 101-SY color camera system. The system is comprised of the camera assembly, the purge system, and the multiport riser unit.

Kohlman, E.H.; Smet, D.B.

1994-12-01T23:59:59.000Z

49

AHTR Refueling Systems and Process Description  

SciTech Connect (OSTI)

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

2012-07-15T23:59:59.000Z

50

AHTR Refueling Systems and Process Description  

SciTech Connect (OSTI)

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

2012-07-01T23:59:59.000Z

51

Environmental Management System Plan  

E-Print Network [OSTI]

Water Discharges) of Introduction Environmental Managementmanagement Water conservation LBNL’s approach to sustainable environmentalEnvironmental Management Systems (EMS) to implement sustainable environmental stewardship practices that: Protect the air, water,

Fox, Robert

2009-01-01T23:59:59.000Z

52

Shippingport Spent Fuel Canister System Description  

SciTech Connect (OSTI)

In 1978 and 1979, a total of 72 blanket fuel assemblies (BFAs), irradiated during the operating cycles of the Shippingport Atomic Power Station's Pressurized Water Reactor (PWR) Core 2 from April 1965 to February 1974, were transferred to the Hanford Site and stored in underwater storage racks in Cell 2R at the 221-T Canyon (T-Plant). The initial objective was to recover the produced plutonium in the BFAs, but this never occurred and the fuel assemblies have remained within the water storage pool to the present time. The Shippingport Spent Fuel Canister (SSFC) is a confinement system that provides safe transport functions (in conjunction with the TN-WHC cask) and storage for the BFAs at the Canister Storage Building (CSB). The current plan is for these BFAs to be retrieved from wet storage and loaded into SSFCs for dry storage. The sealed SSFCs containing BFAs will be vacuum dried, internally backfilled with helium, and leak tested to provide suitable confinement for the BFAs during transport and storage. Following completion of the drying and inerting process, the SSFCs are to be delivered to the CSB for closure welding and long-term interim storage. The CSB will provide safe handling and dry storage for the SSFCs containing the BFAs. The purpose of this document is to describe the SSFC system and interface equipment, including the technical basis for the system, design descriptions, and operations requirements. It is intended that this document will be periodically updated as more equipment design and performance specification information becomes available.

JOHNSON, D.M.

2000-03-27T23:59:59.000Z

53

Oil field management system  

DOE Patents [OSTI]

Oil field management systems and methods for managing operation of one or more wells producing a high void fraction multiphase flow. The system includes a differential pressure flow meter which samples pressure readings at various points of interest throughout the system and uses pressure differentials derived from the pressure readings to determine gas and liquid phase mass flow rates of the high void fraction multiphase flow. One or both of the gas and liquid phase mass flow rates are then compared with predetermined criteria. In the event such mass flow rates satisfy the predetermined criteria, a well control system implements a correlating adjustment action respecting the multiphase flow. In this way, various parameters regarding the high void fraction multiphase flow are used as control inputs to the well control system and thus facilitate management of well operations.

Fincke, James R.

2003-09-23T23:59:59.000Z

54

Description & Careers The Management and Global Business department equips students with necessary tools and skills needed to manage and  

E-Print Network [OSTI]

to be effective managers, but also how to be effective leaders. Management and Global Business graduates find work to Asia and Latin America Management graduates have the flexibility to work in a variety of differentDescription & Careers The Field The Management and Global Business department equips students

Lin, Xiaodong

55

Computer memory management system  

DOE Patents [OSTI]

A computer memory management system utilizing a memory structure system of "intelligent" pointers in which information related to the use status of the memory structure is designed into the pointer. Through this pointer system, The present invention provides essentially automatic memory management (often referred to as garbage collection) by allowing relationships between objects to have definite memory management behavior by use of coding protocol which describes when relationships should be maintained and when the relationships should be broken. In one aspect, the present invention system allows automatic breaking of strong links to facilitate object garbage collection, coupled with relationship adjectives which define deletion of associated objects. In another aspect, The present invention includes simple-to-use infinite undo/redo functionality in that it has the capability, through a simple function call, to undo all of the changes made to a data model since the previous `valid state` was noted.

Kirk, III, Whitson John (Greenwood, MO)

2002-01-01T23:59:59.000Z

56

Purge water management system  

DOE Patents [OSTI]

A purge water management system is described for effectively eliminating the production of purge water when obtaining a groundwater sample from a monitoring well. In its preferred embodiment, the purge water management system comprises an expandable container, a transportation system, and a return system. The purge water management system is connected to a wellhead sampling configuration, typically permanently installed at the well site. A pump, positioned with the monitoring well, pumps groundwater through the transportation system into the expandable container, which expands in direct proportion with volume of groundwater introduced, usually three or four well volumes, yet prevents the groundwater from coming into contact with the oxygen in the air. After this quantity of groundwater has been removed from the well, a sample is taken from a sampling port, after which the groundwater in the expandable container can be returned to the monitoring well through the return system. The purge water management system prevents the purge water from coming in contact with the outside environment, especially oxygen, which might cause the constituents of the groundwater to oxidize. Therefore, by introducing the purge water back into the monitoring well, the necessity of dealing with the purge water as a hazardous waste under the Resource Conservation and Recovery Act is eliminated.

Cardoso-Neto, J.E.; Williams, D.W.

1995-01-01T23:59:59.000Z

57

Purge water management system  

DOE Patents [OSTI]

A purge water management system for effectively eliminating the production of purge water when obtaining a groundwater sample from a monitoring well. In its preferred embodiment, the purge water management system comprises an expandable container, a transportation system, and a return system. The purge water management system is connected to a wellhead sampling configuration, typically permanently installed at the well site. A pump, positioned with the monitoring well, pumps groundwater through the transportation system into the expandable container, which expands in direct proportion with volume of groundwater introduced, usually three or four well volumes, yet prevents the groundwater from coming into contact with the oxygen in the air. After this quantity of groundwater has been removed from the well, a sample is taken from a sampling port, after which the groundwater in the expandable container can be returned to the monitoring well through the return system. The purge water management system prevents the purge water from coming in contact with the outside environment, especially oxygen, which might cause the constituents of the groundwater to oxidize. Therefore, by introducing the purge water back into the monitoring well, the necessity of dealing with the purge water as a hazardous waste under the Resource Conservation and Recovery Act is eliminated.

Cardoso-Neto, Joao E. (North Augusta, SC); Williams, Daniel W. (Aiken, SC)

1996-01-01T23:59:59.000Z

58

TELECOM incubator summer internship description.doc TELECOM & Management SudParis Pamplin Summer Internships  

E-Print Network [OSTI]

at Management Sud Paris. They will work for a start-up company in the business incubator at Management Sud ParisTELECOM incubator summer internship description.doc TELECOM & Management SudParis ­ Pamplin Summer Internships Introduction Virginia Tech has had an exchange agreement for many years with TELECOM &Management

Virginia Tech

59

Integrated Safety Management System (ISMS) program description  

SciTech Connect (OSTI)

This document the ISMS Program for the 300 Area and lists the procedures necessary to implement the program.

BUMP, S.L.

1999-09-30T23:59:59.000Z

60

Steam System Data Management  

E-Print Network [OSTI]

Steam System Data Management What Does It Include Safety In Motion Wal?Tech?Valve,?Inc. 251?438?2203 The Real Genius Behind Technology Is People ESL-IE-13-05-35 Proceedings of the Thrity-Fifth Industrial Energy Technology Conference New... ? Fabrication Training (Six Year Training) ? Welding Certifications ?Retired From Chevron After 25 Years ? Established A Steam System Program ? Planner For Routine Maintenance Work ? Planner For Steam System Improvements ? Wal-Tech Valve, Inc. ? Purchased...

Roberts, D.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Cold Vacuum Drying facility HVAC system design description  

SciTech Connect (OSTI)

This System Design Description (SDD) addresses the HVAC system for the CVDF. The CVDF HVAC system consists of five subsystems: (1) Administration building HVAC system; (2) Process bay recirculation HVAC system; (3) Process bay local exhaust HVAC and process vent system; (4) Process general supply/exhaust HVAC system; and (5) Reference air system. The HVAC and reference air systems interface with the following systems: the fire protection control system, Monitoring and Control System (MCS), electrical power distribution system (including standby power), compressed air system, Chilled Water (CHW) system, drainage system, and other Cold Vacuum Drying (CVD) control systems not addressed in this SDD.

SINGH, G.

2000-09-22T23:59:59.000Z

62

Comprehensive Emergency Management System  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish policy and to assign and describe roles and responsibilities for the Department of Energy (DOE) Emergency Management System. (This is an administrative change to DOE O 151.1A). Canceled by DOE O 151.1C. Cancels DOE O 151.1A.

2003-10-29T23:59:59.000Z

63

Comprehensive Emergency Management System  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Order establishes policy and assigns and describes roles and responsibilities for the DOE Emergency Management System. Cancels DOE 5500.1B, DOE 5500.2B, DOE 5500.3A, DOE 5500.4A, 5500.5A,5500.7B, 5500.8A, 5500.9A, DOE 5500.10

1996-08-21T23:59:59.000Z

64

Description & Careers Supply Chain Management is how business gets done. Supply chain management spans all movement and storage of raw  

E-Print Network [OSTI]

management spans all movement and storage of raw materials, work-in-process inventory, and finished goods of supply chains, resource managers of material or manufacturing resources planning (MRP), and processDescription & Careers The Field Supply Chain Management is how business gets done. Supply chain

Lin, Xiaodong

65

Power management system  

DOE Patents [OSTI]

A method of managing power resources for an electrical system of a vehicle may include identifying enabled power sources from among a plurality of power sources in electrical communication with the electrical system and calculating a threshold power value for the enabled power sources. A total power load placed on the electrical system by one or more power consumers may be measured. If the total power load exceeds the threshold power value, then a determination may be made as to whether one or more additional power sources is available from among the plurality of power sources. At least one of the one or more additional power sources may be enabled, if available.

Algrain, Marcelo C. (Peoria, IL); Johnson, Kris W. (Washington, IL); Akasam, Sivaprasad (Peoria, IL); Hoff, Brian D. (East Peoria, IL)

2007-10-02T23:59:59.000Z

66

Novette pulse-power-system description  

SciTech Connect (OSTI)

This paper is a summary of the pulse power systems for Novette; the flashlamp power system, the pulsers for the various optical shutters and the pulse power control system.

Gritton, D.G.; Christie, D.J.; Holloway, R.W.; Merritt, B.T.; Oicles, J.A.; Whitham, K.; Wilcox, R.B.

1983-01-01T23:59:59.000Z

67

System Management Software for Virtual Environments  

SciTech Connect (OSTI)

Recently there has been an increased interest in the use of system-level virtualization using mature solutions such as Xen, QEMU, or VMWare. These virtualization platforms are being used in distributed and parallel environments including high performance computing. The use of virtual machines within such environments introduces new challenges to system management. These include tedious tasks such as deploying para-virtualized host operating systems to support virtual machine execution or virtual overlay networks to connect these virtual machines. Additionally, there is the problem of machine definition and deployment, which is complicated by differentiation in the underlying virtualization technology. This paper discusses tools for the deployment and management of both host operating systems and virtual machines in clusters. We begin with an overview of system-level virtualization and move on to a description of tools that we have developed to aid with these environments. These tools extend prior work in the area of cluster installation, configuration and management.

Vallee, Geoffroy R [ORNL; Naughton, III, Thomas J [ORNL; Scott, Stephen L [ORNL

2007-01-01T23:59:59.000Z

68

Emergency Management System  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order establishes policy, and assigns and describes roles and responsibilities for the DOE Emergency Management System. DOE 5500.1B Chg 1; DOE 5500.2B Chg 1; DOE 5500.3A Chg 1; DOE 5500.4A; DOE 5500.5A; DOE 5500.7B; DOE 5500.8A; DOE 5500.9A, and DOE 5500.10A Chg 1. Canceled by DOE O 151.1A.

1995-09-25T23:59:59.000Z

69

CARRIER/CASK HANDLING SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Carrier/Cask Handling System receives casks on railcars and legal-weight trucks (LWTs) (transporters) that transport loaded casks and empty overpacks to the Monitored Geologic Repository (MGR) from the Carrier/Cask Transport System. Casks that come to the MGR on heavy-haul trucks (HHTs) are transferred onto railcars before being brought into the Carrier/Cask Handling System. The system is the interfacing system between the railcars and LWTs and the Assembly Transfer System (ATS) and Canister Transfer System (CTS). The Carrier/Cask Handling System removes loaded casks from the cask transporters and transfers the casks to a transfer cart for either the ATS or CTS, as appropriate, based on cask contents. The Carrier/Cask Handling System receives the returned empty casks from the ATS and CTS and mounts the casks back onto the transporters for reshipment. If necessary, the Carrier/Cask Handling System can also mount loaded casks back onto the transporters and remove empty casks from the transporters. The Carrier/Cask Handling System receives overpacks from the ATS loaded with canisters that have been cut open and emptied and mounts the overpacks back onto the transporters for disposal. If necessary, the Carrier/Cask Handling System can also mount empty overpacks back onto the transporters and remove loaded overpacks from them. The Carrier/Cask Handling System is located within the Carrier Bay of the Waste Handling Building System. The system consists of cranes, hoists, manipulators, and supporting equipment. The Carrier/Cask Handling System is designed with the tooling and fixtures necessary for handling a variety of casks. The Carrier/Cask Handling System performance and reliability are sufficient to support the shipping and emplacement schedules for the MGR. The Carrier/Cask Handling System interfaces with the Carrier/Cask Transport System, ATS, and CTS as noted above. The Carrier/Cask Handling System interfaces with the Waste Handling Building System for building structures and space allocations. The Carrier/Cask Handling System interfaces with the Waste Handling Building Electrical System for electrical power.

E.F. Loros

2000-06-23T23:59:59.000Z

70

WASTE PACKAGE REMEDIATION SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Waste Package Remediation System remediates waste packages (WPs) and disposal containers (DCs) in one of two ways: preparation of rejected DC closure welds for repair or opening of the DC/WP. DCs are brought to the Waste Package Remediation System for preparation of rejected closure welds if testing of the closure weld by the Disposal Container Handling System indicates an unacceptable, but repairable, welding flaw. DC preparation of rejected closure welds will require removal of the weld in such a way that the Disposal Container Handling System may resume and complete the closure welding process. DCs/WPs are brought to the Waste Package Remediation System for opening if the Disposal Container Handling System testing of the DC closure weld indicates an unrepairable welding flaw, or if a WP is recovered from the subsurface repository because suspected damage to the WP or failure of the WP has occurred. DC/WP opening will require cutting of the DC/WP such that a temporary seal may be installed and the waste inside the DC/WP removed by another system. The system operates in a Waste Package Remediation System hot cell located in the Waste Handling Building that has direct access to the Disposal Container Handling System. One DC/WP at a time can be handled in the hot cell. The DC/WP arrives on a transfer cart, is positioned within the cell for system operations, and exits the cell without being removed from the cart. The system includes a wide variety of remotely operated components including a manipulator with hoist and/or jib crane, viewing systems, machine tools for opening WPs, and equipment used to perform pressure and gas composition sampling. Remotely operated equipment is designed to facilitate DC/WP decontamination and hot cell equipment maintenance, and interchangeable components are provided where appropriate. The Waste Package Remediation System interfaces with the Disposal Container Handling System for the receipt and transport of WPs and DCs. The Waste Handling Building System houses the system, and provides the facility, safety, and auxiliary systems required to support operations. The system receives power from the Waste Handling Building Electrical System. The system also interfaces with the various DC systems.

N.D. Sudan

2000-06-22T23:59:59.000Z

71

Galilei invariant technique for quantum system description  

SciTech Connect (OSTI)

Problems with quantum systems models, violating Galilei invariance are examined. The method for arbitrary non-relativistic quantum system Galilei invariant wave function construction, applying a modified basis where center-of-mass excitations have been removed before Hamiltonian matrix diagonalization, is developed. For identical fermion system, the Galilei invariant wave function can be obtained while applying conventional antisymmetrization methods of wave functions, dependent on single particle spatial variables.

Kamuntavi?ius, Gintautas P. [Department of Physics, Vytautas Magnus University, Vileikos 8, Kaunas 44404 (Lithuania)] [Department of Physics, Vytautas Magnus University, Vileikos 8, Kaunas 44404 (Lithuania)

2014-04-15T23:59:59.000Z

72

DESCRIPTION OF THE RHIC SEQUENCER SYSTEM.  

SciTech Connect (OSTI)

The movement of the Relativistic Heavy Ion Collider (RHIC) through its various states (eg. injection, acceleration, storage, collisions) is controlled by an application called the Sequencer. This program orchestrates most magnet and instrumentation systems and is responsible for the coordinated acquisition and saving of data from various systems. The Sequencer system, its software infrastructure, support programs, and the language used to drive it are discussed in this paper. Initial operational experience is also described.

DOTTAVIO,T.; FRAK,B.; MORRIS,J.; SATOGATA,T.; VAN ZEIJTS,J.

2001-11-27T23:59:59.000Z

73

Environmental Compliance Management System  

SciTech Connect (OSTI)

Argonne National Laboratory (ANL) is developing the Environmental Compliance Management System (ECMS) as a comprehensive, cost-effective tool to ensure (1) that the Laboratory complies with all applicable federal and state environmental laws and regulations, (2) that environmental issues and concerns are recognized and considered in the early phases of projects; and (3) that Laboratory personnel conduct Laboratory operations in the most environmentally acceptable manner. The ECMS is an expert computer system which is designed to allow project engineers to perform an environmental evaluation of their projects. The system includes a Master Program which collects basic project information, provide utility functions, and access the environmental expert modules, environmental expert system modules for each federal and state environmental law which allows the user to obtain specific information on how an individual law may affect his project; and site-specific databases which contain information necessary for effective management of the site under environmental regulations. The ECMS will have the capability to complete and print many of the necessary environmental forms required by federal and state agencies, including the Department of Energy.

Brownson, L.W.; Krsul, T.; Peralta, R.A. [Argonne National Lab., Idaho Falls, ID (United States); Knudson, D.A.; Rosignolo, C.L. [Argonne National Lab., IL (United States)

1992-09-01T23:59:59.000Z

74

Mobile Traffic Management System Test Deployment  

E-Print Network [OSTI]

BERKELEY Mobile Traf?c Management System Test DeploymentHIGHWAYS MOBILE TRAFFIC MANAGEMENT SYSTEM TEST DEPLOYMENTMobile Transportation Management System (MTMS). This new and

Gerfen, Jeffrey Brian

2005-01-01T23:59:59.000Z

75

Environmental Management System Plan  

SciTech Connect (OSTI)

Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation Management establishes the policy that Federal agencies conduct their environmental, transportation, and energy-related activities in a manner that is environmentally, economically and fiscally sound, integrated, continually improving, efficient, and sustainable. The Department of Energy (DOE) has approved DOE Order 450.1A, Environmental Protection Program and DOE Order 430.2B, Departmental Energy, Renewable Energy and Transportation Management as the means of achieving the provisions of this Executive Order. DOE Order 450.1A mandates the development of Environmental Management Systems (EMS) to implement sustainable environmental stewardship practices that: (1) Protect the air, water, land, and other natural and cultural resources potentially impacted by facility operations; (2) Meet or exceed applicable environmental, public health, and resource protection laws and regulations; and (3) Implement cost-effective business practices. In addition, the DOE Order 450.1A mandates that the EMS must be integrated with a facility's Integrated Safety Management System (ISMS) established pursuant to DOE P 450.4, 'Safety Management System Policy'. DOE Order 430.2B mandates an energy management program that considers energy use and renewable energy, water, new and renovated buildings, and vehicle fleet activities. The Order incorporates the provisions of the Energy Policy Act of 2005 and Energy Independence and Security Act of 2007. The Order also includes the DOE's Transformational Energy Action Management initiative, which assures compliance is achieved through an Executable Plan that is prepared and updated annually by Lawrence Berkeley National Laboratory (LBNL, Berkeley Lab, or the Laboratory) and then approved by the DOE Berkeley Site Office. At the time of this revision to the EMS plan, the 'FY2009 LBNL Sustainability Executable Plan' represented the most current Executable Plan. These DOE Orders and associated policies establish goals and sustainable stewardship practices that are protective of environmental, natural, and cultural resources, and take a life cycle approach that considers aspects such as: (1) Acquisition and use of environmentally preferable products; (2) Electronics stewardship; (3) Energy conservation, energy efficiency, and renewable energy; (4) Pollution prevention, with emphasis on toxic and hazardous chemical and material reduction; (5) Procurement of efficient energy and water consuming materials and equipment; (6) Recycling and reuse; (7) Sustainable and high-performance building design; (8) Transportation and fleet management; and (9) Water conservation. LBNL's approach to sustainable environmental stewardship required under Order 450.1A poses the challenge of implementing its EMS in a compliance-based, performance-based, and cost-effective manner. In other words, the EMS must deliver real and tangible business value at a minimal cost. The purpose of this plan is to describe Berkeley Lab's approach for achieving such an EMS, including an overview of the roles and responsibilities of key Laboratory parties. This approach begins with a broad-based environmental policy consistent with that stated in Chapter 11 of the LBNL Health and Safety Manual (PUB-3000). This policy states that Berkeley Lab is committed to the following: (1) Complying with applicable environmental, public health, and resource conservation laws and regulations. (2) Preventing pollution, minimizing waste, and conserving natural resources. (3) Correcting environmental hazards and cleaning up existing environmental problems, and (4) Continually improving the Laboratory's environmental performance while maintaining operational capability and sustaining the overall mission of the Laboratory. A continual cycle of planning, implementing, evaluating, and improving processes will be performed to achieve goals, objectives, and targets that will help LBNL carry out this policy. Each year, environmental aspects will be identified and their impacts to the environm

Fox, Robert; Thorson, Patrick; Horst, Blair; Speros, John; Rothermich, Nancy; Hatayama, Howard

2009-03-24T23:59:59.000Z

76

Environmental management system.  

SciTech Connect (OSTI)

The purpose of the Sandia National Laboratories/New Mexico (SNL/NM) Environmental Management System (EMS) is identification of environmental consequences from SNL/NM activities, products, and/or services to develop objectives and measurable targets for mitigation of any potential impacts to the environment. This Source Document discusses the annual EMS process for analysis of environmental aspects and impacts and also provides the fiscal year (FY) 2010 analysis. Further information on the EMS structure, processes, and procedures are described within the programmatic EMS Manual (PG470222).

Salinas, Stephanie A.

2010-08-01T23:59:59.000Z

77

Computer Systems and Network Manager  

E-Print Network [OSTI]

Computer Systems and Network Manager Fort Collins, Colorado POSITION A Computers Systems activities. RESPONSIBILITIES The successful candidate will perform computer systems and network administration, including computer hardware, systems software, applications software, and all configurations

78

Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData FilesShape, Density, and Morphologyusing TD-DFT. |Description

79

Learning Management System Transition Project  

E-Print Network [OSTI]

Learning Management System Transition Project Kickoff Jim Snell Director Instructional Technology Services #12;History · Texas A&M started using the Campus Edition WebCT learning management system (LMS Process March 2012 · Project manager hired March 2012 · ITS project team assigned April 2012 · Contract

80

Earned Value Management System (EVMS)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Guide supports the Departments initiatives to improve program, project, and contract management through the implementation and surveillance of contractors earned value management systems. Canceled by DOE G 413.3-10A.

2008-05-06T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Random matrix description of decaying quantum systems  

E-Print Network [OSTI]

This contribution describes a statistical model for decaying quantum systems (e.g. photo-dissociation or -ionization). It takes the interference between direct and indirect decay processes explicitely into account. The resulting expressions for the partial decay amplitudes and the corresponding cross sections may be considered a many-channel many-resonance generalization of Fano's original work on resonance lineshapes [Phys. Rev 124, 1866 (1961)]. A statistical (random matrix) model is then introduced. It allows to describe chaotic scattering systems with tunable couplings to the decay channels. We focus on the autocorrelation function of the total (photo) cross section, and we find that it depends on the same combination of parameters, as the Fano-parameter distribution. These combinations are statistical variants of the one-channel Fano parameter. It is thus possible to study Fano interference (i.e. the interference between direct and indirect decay paths) on the basis of the autocorrelation function, and thereby in the regime of overlapping resonances. It allows us, to study the Fano interference in the limit of strongly overlapping resonances, where we find a persisting effect on the level of the weak localization correction.

T. Gorin

2005-10-04T23:59:59.000Z

82

Cryptographic Key Management System  

SciTech Connect (OSTI)

This report summarizes the outcome of U.S. Department of Energy (DOE) contract DE-OE0000543, requesting the design of a Cryptographic Key Management System (CKMS) for the secure management of cryptographic keys for the energy sector infrastructure. Prime contractor Sypris Electronics, in collaboration with Oak Ridge National Laboratories (ORNL), Electric Power Research Institute (EPRI), Valicore Technologies, and Purdue University's Center for Education and Research in Information Assurance and Security (CERIAS) and Smart Meter Integration Laboratory (SMIL), has designed, developed and evaluated the CKMS solution. We provide an overview of the project in Section 3, review the core contributions of all contractors in Section 4, and discuss bene#12;ts to the DOE in Section 5. In Section 6 we describe the technical construction of the CKMS solution, and review its key contributions in Section 6.9. Section 7 describes the evaluation and demonstration of the CKMS solution in different environments. We summarize the key project objectives in Section 8, list publications resulting from the project in Section 9, and conclude with a discussion on commercialization in Section 10 and future work in Section 11.

No, author

2014-02-21T23:59:59.000Z

83

Computerized training management system  

DOE Patents [OSTI]

A Computerized Training Management System (CTMS) is disclosed for providing a procedurally defined process that is employed to develop accreditable performance based training programs for job classifications that are sensitive to documented regulations and technical information. CTMS is a database that links information needed to maintain a five-phase approach to training-analysis, design, development, implementation, and evaluation independent of training program design. CTMS is designed using R-Base{trademark}, an-SQL compliant software platform. Information is logically entered and linked in CTMS. Each task is linked directly to a performance objective, which, in turn, is linked directly to a learning objective; then, each enabling objective is linked to its respective test items. In addition, tasks, performance objectives, enabling objectives, and test items are linked to their associated reference documents. CTMS keeps all information up to date since it automatically sorts, files and links all data; CTMS includes key word and reference document searches. 18 figs.

Rice, H.B.; McNair, R.C.; White, K.; Maugeri, T.

1998-08-04T23:59:59.000Z

84

Computerized training management system  

DOE Patents [OSTI]

A Computerized Training Management System (CTMS) for providing a procedurally defined process that is employed to develop accreditable performance based training programs for job classifications that are sensitive to documented regulations and technical information. CTMS is a database that links information needed to maintain a five-phase approach to training-analysis, design, development, implementation, and evaluation independent of training program design. CTMS is designed using R-Base.RTM., an-SQL compliant software platform. Information is logically entered and linked in CTMS. Each task is linked directly to a performance objective, which, in turn, is linked directly to a learning objective; then, each enabling objective is linked to its respective test items. In addition, tasks, performance objectives, enabling objectives, and test items are linked to their associated reference documents. CTMS keeps all information up to date since it automatically sorts, files and links all data; CTMS includes key word and reference document searches.

Rice, Harold B. (Franklin Furnace, OH); McNair, Robert C. (East Setauket, NY); White, Kenneth (Shirley, NY); Maugeri, Terry (Wading River, NY)

1998-08-04T23:59:59.000Z

85

Cold Vacuum Drying (CVD) Electrical System Design Description  

SciTech Connect (OSTI)

This system design description (SDD) provides a technical explanation of the design and operation of the electrical system for the Cold Vacuum Drying Facility (CVDF). This SDD also identifies the requirements, and the basis for the requirements and details on how the requirements have been implemented in the design and construction of the facility. This SDD also provides general guidance for the surveillance, testing, and maintenance of this system.

SINGH, G.

2000-05-01T23:59:59.000Z

86

Environmental Management System Plan  

E-Print Network [OSTI]

management Water conservation LBNL’s approach to sustainable environmentalWater Discharges) of Introduction Environmental Managementenvironmental compliance programs, such as air and water quality, as well as less traditional programs, such as wildland fire management,

Fox, Robert

2009-01-01T23:59:59.000Z

87

System for Award Management (SAM):  

Energy Savers [EERE]

System for Award Management (SAM) ChallengeHER Opportunities for Women in Federal Contracting May 23, 2013 Judith R. Zawatsky General Services Administration You are here today...

88

Earned Value Management System (EVMS)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides approaches for implementing the Earned Value Management System (EVMS) requirements of DOE O 413.3B. Cancels DOE G 413.3-10.

2012-03-13T23:59:59.000Z

89

MANAGEMENT CONTROL SYSTEM IN PUBLIC  

E-Print Network [OSTI]

essential aspect of the public management device: compliance with legal rules. Gradually, a new objective of the budgetary system. Thus, public organizations need to create new tools to manage their activities or use, despite the number of reforms adopted in the name of New Public Management, numerous authors also noted

Paris-Sud XI, Université de

90

Project Management vs. Systems Engineering Management: A Practitioners' View on  

E-Print Network [OSTI]

Project Management vs. Systems Engineering Management: A Practitioners' View on IntegratingPROJECT MANAGEMENT VS. SYSTEMS ENGINEERING MANAGEMENT Received 3 August 2010; Revised 18 December 2010 (wileyonlinelibrary.com). DOI 10.1002/sys.20187 ABSTRACT While most Systems Engineering Management (SEM) applications

de Weck, Olivier L.

91

INL's Environmental Management System  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and minimize environmental impacts throughout the lifecycle of INL facilities and operations. Conduct all activities and manage hazardous and radioactive materials and...

92

Fuel cell gas management system  

DOE Patents [OSTI]

A fuel cell gas management system including a cathode humidification system for transferring latent and sensible heat from an exhaust stream to the cathode inlet stream of the fuel cell; an anode humidity retention system for maintaining the total enthalpy of the anode stream exiting the fuel cell equal to the total enthalpy of the anode inlet stream; and a cooling water management system having segregated deionized water and cooling water loops interconnected by means of a brazed plate heat exchanger.

DuBose, Ronald Arthur (Marietta, GA)

2000-01-11T23:59:59.000Z

93

Lighting system with thermal management system  

DOE Patents [OSTI]

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

Arik, Mehmet; Weaver, Stanton; Stecher, Thomas; Seeley, Charles; Kuenzler, Glenn; Wolfe, Jr., Charles; Utturkar, Yogen; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

2013-05-07T23:59:59.000Z

94

Building International Emergency Management Systems | National...  

National Nuclear Security Administration (NNSA)

Building International Emergency Management Systems | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

95

Electric energy supply systems: description of available technologies  

SciTech Connect (OSTI)

When comparing coal transportation with electric transmission as a means of delivering electric power, it is desirable to compare entire energy systems rather than just the transportation/transmission components because the requirements of each option may affect the requirements of other energy system components. PNL's assessment consists of two parts. The first part, which is the subject of this document, is a detailed description of the technical, cost, resource and environmental characteristics of each system component and technologies available for these components. The second part is a computer-based model that PNL has developed to simulate construction and operation of alternative system configurations and to compare the performance of these systems under a variety of economic and technical conditions. This document consists of six chapters and two appendices. A more thorough description of coal-based electric energy systems is presented in the Introduction and Chapter 1. Each of the subsequent chapters describes technologies for five system components: Western coal resources (Chapter 2), coal transportation (Chapter 3), coal gasification and gas transmission (Chapter 4), and electric power transmission (Chapter 6).

Eisenhauer, J.L.; Rogers, E.A.; King, J.C.; Stegen, G.E.; Dowis, W.J.

1985-02-01T23:59:59.000Z

96

CASK/MSC/WP PREPARATION SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the Cask/MSC/WP preparation system and their bases to allow the design effort to proceed to license application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design, as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This type of SDD both leads and trails the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. This SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. This SDD addresses the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]) requirements. Additional PRD requirements may be cited, as applicable, to drive the design of specific aspects of the system, with justifications provided in the basis. Functional and operational requirements applicable to this system are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]) document. Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (BSC 2004 [DIRS 171599]) and the preclosure safety analyses.

S. Drummond

2005-04-12T23:59:59.000Z

97

Federal Emergency Management Information system (FEMIS) data management guide. Version 1.2  

SciTech Connect (OSTI)

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and analysis tool that is being developed under the direction of the US Army Chemical and Biological Defense Command. The FEMIS Data Management Guide provides the background, as well as the operations and procedures needed to generate and maintain the data resources in the system. Database administrators, system administrators, and general users can use this guide to manage the data files and database that support the administrative, user-environment, database management, and operational capabilities of FEMIS. This document provides a description of the relational and spatial information present in FEMIS. It describes how the data was assembled, how it is loaded, and how it is managed while the system is in operation.

Burnett, R.A.; Downing, T.R.; Gaustad, K.L.; Johnson, S.M.; Loveall, R.M.; Winters, C.

1996-05-01T23:59:59.000Z

98

A 17025:2005A 17025:2005 Management SystemManagement System  

E-Print Network [OSTI]

A 17025:2005A 17025:2005 Management SystemManagement System Made SimpleMade Simple What to think about when reviewingWhat to think about when reviewing the Management Systemthe Management System #12 role does top management play?le does top management play? Technical Manager/Quality Manager

99

PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS  

SciTech Connect (OSTI)

The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

MAY TH

2008-08-12T23:59:59.000Z

100

Energy Management and Information Systems  

E-Print Network [OSTI]

?infrastructure energy?audits,?HVAC?upgrades,? heat?recovery,?etc. Improve?operations processes?and?day?to?day? operations,?retro? commissioning ENERGY?MANAGEMENT?INFORMATION?SYSTEM the?project Hardware ? $3.0?million?investment ? 400+?meters...

Conraud, J.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Integrated Safety Management System Manual  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This manual provides requirements and guidance for DOE and contractors to ensure development and implementation of an effective Integrated Safety Management system that is periodically reviewed and continuously improved. Canceled by DOE O 450.2.

2006-11-01T23:59:59.000Z

102

Heating System Modernization, Management of Peripheral Scope...  

Energy Savers [EERE]

System Modernization, Management of Peripheral Scope Lessons Learned Report, NNSA, Dec 2010 Heating System Modernization, Management of Peripheral Scope Lessons Learned Report,...

103

MIT System Design and Management Program  

E-Print Network [OSTI]

MIT System Design and Management Program MIT System Design and Management Program Leadership, innovation, systems thinking #12;MIT System Design and Management Program #12;about MIT The mission of MIT of leaders, MIT's System Design and Management Program (SDM) educates mid-career technical professionals

de Weck, Olivier L.

104

System design description for the consolidated sludge sampling system for K Basins floor and fuel canisters  

SciTech Connect (OSTI)

This System Design Description describes the Consolidated Sludge Sampling System used in the gathering of sludge samples from K Basin floor and fuel canisters. This document provides additional information on the need for the system, the functions and requirements of the systems, the operations of the system, and the general work plan used in its' design and development.

HECHT, S.L.

1999-02-18T23:59:59.000Z

105

Demil planning and management system  

SciTech Connect (OSTI)

The National Maintenance Point (NMP) Branch of the US Army Industrial Operations Command (IOC) serves as the Single Manager for Conventional Ammunition (SMCA) agent for managing the renovation, modification, recycling, and disposal of conventional ammunition, thereby improving readiness. The mission of the NMP includes program management for demilitarization (demil) activities, ammunition maintenance, and ammunition peculiar equipment (APE) projects. Through an Interagency Agreement between the US Army and the US Department of Energy, Argonne National Laboratory (ANL) is developing an integrated data management system, called the Demil Planning and Management System (DPMS), for IOC. DPMS is intended to help NMP efficiently manage information on ongoing demil project activities and asset inventories, plan future projects, and allocate budgets. This system, when fully implemented, will also make it possible for the user community to interactively access the DPMS database; perform data entry and queries; and run reports through network, modem, and Internet access to the system. This paper describes the principal components of the DPMS, current capabilities, and planned enhancements.

Huber, C.C.; Bormet, S.M.; Whitfield, R.G.; Bowen, M.; Chun, K.C. [Argonne National Lab., IL (United States); Golden, R.E. [Army Pacific, Fort Shafter, HI (United States); Fuller, R. [Army Industrial Operations Command, Rock Island, IL (United States). National Maintenance Point Branch

1997-08-01T23:59:59.000Z

106

Revised June 2014 Training Management System (TMS)  

E-Print Network [OSTI]

Revised June 2014 Training Management System (TMS) User Manual Contents Accessing the TMS.................................................................................................................15 #12;2 Accessing the TMS Before accessing the Training Management System you must know your Harvard...........................................................................................................................................2 Training Director, Training Manager, and Course Director Access

Heller, Eric

107

Automated Surface Observing System (ASOS) General System Description  

E-Print Network [OSTI]

Generator System $ 4,300 135 $ 580,500 Hydrogen Fuel Cell $ 5,500 135 $ 742,500 4 #12;Life Cycle Cost;ACU Option Comparison Battery Bank to power Hydrogen Fuel Engine Generator the existing UPS Cell at 884 sites nationwide, normally at airports · System has two distinct subsystems: Field installed

108

Federal Emergency Management Information System (FEMIS) system administration guide. Version 1.2  

SciTech Connect (OSTI)

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and analysis tool that is being developed under the direction of the US Army Chemical biological Defense Command. The FEMIS System Administration Guide defines FEMIS hardware and software requirements and gives instructions for installing the FEMIS system package. System administrators, database administrators, and general users can use this guide to install, configure, and maintain the FEMIS client software package. This document provides a description of the FEMIS environment; distribution media; data, communications, and electronic mail servers; user workstations; and system management.

Burford, M.J.; Burnett, R.A.; Curtis, L.M. [and others

1996-05-01T23:59:59.000Z

109

Standard-B Hydrogen Monitoring System, system design description  

SciTech Connect (OSTI)

During most of the year, it is assumed that the vapor in the 177 radioactive waste tanks on the Hanford Project site contain a uniform mixture of gases. Several of these waste tanks (currently twenty five, 6 Double Shell Tanks and 19 Single Shell Tanks) were identified as having the potential for the buildup of gases to a flammable level. An active ventilation system in the Double Shell Tanks and a passive ventilation system in the Single Shell Tanks provides a method of expelling gases from the tanks. A gas release from a tank causes a temporary rise in the tank pressure, and a potential for increased concentration of hydrogen gas in the vapor space. The gas is released via the ventilation systems until a uniform gas mixture in the vapor space is once again achieved. This document describes the design of the Standard-B Hydrogen Monitoring System, (SHMS) and its components as it differs from the original SHMS. The differences are derived from changes made to improve the system performance but not implemented in all the installed enclosures.

Schneider, T.C.

1995-01-16T23:59:59.000Z

110

Standard-D hydrogen monitoring system, system design description  

SciTech Connect (OSTI)

During most of the year, it is assumed that the vapor space in the 177 radioactive waste tanks on the Hanford Project site contain a uniform mixture of gases. Several of these waste tanks (currently twenty-five, 6 Double Shell Tanks and 19 Single Shell Tanks) were identified as having the potential for the buildup of gasses to a flammable level. An active ventilation system in the Double Shell Tanks and a passive ventilation system in the Single Shell Tanks provides a method of expelling gasses from the tanks. A gas release from a tank causes a temporary rise in the tank pressure, and a potential for increased concentration of hydrogen gas in the vapor space. The gas is released via the ventilation systems until a uniform gas mixture in the vapor space is once again achieved. The Standard Hydrogen Monitoring System (SHMS) is designed to monitor and quantify the percent hydrogen concentration during these potential gas releases. This document describes the design of the Standard-D Hydrogen Monitoring System, (SHMS-D) and its components as it differs from the original SHMS.

Schneider, T.C.

1996-09-26T23:59:59.000Z

111

SY101 in situ viscometer instrument system design description  

SciTech Connect (OSTI)

This documents the design and description of the in situ viscometer, developed for the hydrogen mitigation project.

Pearce, K.L.; Stokes, T.I.; Vagelatos, N.

1994-08-18T23:59:59.000Z

112

Thermal management systems and methods  

DOE Patents [OSTI]

A thermal management system for a vehicle includes a heat exchanger having a thermal energy storage material provided therein, a first coolant loop thermally coupled to an electrochemical storage device located within the first coolant loop and to the heat exchanger, and a second coolant loop thermally coupled to the heat exchanger. The first and second coolant loops are configured to carry distinct thermal energy transfer media. The thermal management system also includes an interface configured to facilitate transfer of heat generated by an internal combustion engine to the heat exchanger via the second coolant loop in order to selectively deliver the heat to the electrochemical storage device. Thermal management methods are also provided.

Gering, Kevin L.; Haefner, Daryl R.

2006-12-12T23:59:59.000Z

113

Towards CORBAbased Enterprise Management: Managing CORBAbased Systems with SNMP Platforms  

E-Print Network [OSTI]

of different management architectures. The aim of the work described in this paper con­ sists in helping1 Towards CORBA­based Enterprise Management: Managing CORBA­based Systems with SNMP Platforms, CA, USA, November 1998 Abstract--- Apart from the well established OSI/TMN and Internet management

114

Tokamak Physics EXperiment (TPX): Toroidal field magnet design, development and manufacture. SDRL 15, System design description. Volume 1  

SciTech Connect (OSTI)

This System Design Description, prepared in accordance with the TPX Project Management Plan provides a summary or TF Magnet System design features at the conclusion of Phase I, Preliminary Design and Manufacturing Research. The document includes the analytical and experimental bases for the design, and plans for implementation in final design, manufacturing, test, and magnet integration into the tokamak. Requirements for operation and maintenance are outlined, and references to sources of additional information are provided.

NONE

1995-09-22T23:59:59.000Z

115

COKEMASTER: Coke plant management system  

SciTech Connect (OSTI)

To keep coke utilization in ironmaking as competitive as possible, the potential to improve the economics of coke production has to be utilized. As one measure to meet this need of its customers, Krupp Koppers has expanded its existing ECOTROL computer system for battery heating control to a comprehensive Coke Plant Management System. Increased capacity utilization, lower energy consumption, stabilization of plant operation and ease of operation are the main targets.

Johanning, J.; Reinke, M. [Krupp Koppers GmbH, Essen (Germany)

1996-12-31T23:59:59.000Z

116

Appendix 1 -Additional iManage Systems  

Broader source: Energy.gov (indexed) [DOE]

Corporate Human Resources Information System (CHRIS) iManage Employee Self Service (ESS) iManage GovTrip (eTravel Services) iBenefits iManage iBudget (Budget Formulation...

117

Spent Nuclear Fuel Project document control and Records Management Program Description  

SciTech Connect (OSTI)

The Spent Nuclear Fuel (SNF) Project document control and records management program, as defined within this document, is based on a broad spectrum of regulatory requirements, Department of Energy (DOE) and Project Hanford and SNF Project-specific direction and guidance. The SNF Project Execution Plan, HNF-3552, requires the control of documents and management of records under the auspices of configuration control, conduct of operations, training, quality assurance, work control, records management, data management, engineering and design control, operational readiness review, and project management and turnover. Implementation of the controls, systems, and processes necessary to ensure compliance with applicable requirements is facilitated through plans, directives, and procedures within the Project Hanford Management System (PHMS) and the SNF Project internal technical and administrative procedures systems. The documents cited within this document are those which directly establish or define the SNF Project document control and records management program. There are many peripheral documents that establish requirements and provide direction pertinent to managing specific types of documents that, for the sake of brevity and clarity, are not cited within this document.

MARTIN, B.M.

2000-05-18T23:59:59.000Z

118

Federal Emergency Management Information System (FEMIS) Data Management Guide Version 1.3  

SciTech Connect (OSTI)

FEMIS is an emergency management planning and analysis tool that is being developed under the direction of the US Army Chemical and Biological Defense Command. FEMIS is designed to help civilian emergency management personnel to plan for and support their responses to a chemical-releasing event at a military chemical stockpile. This guide provides the background as well as the operations and procedures needed to generate and maintain the data resources in the system. Database administrators, system administrators, and general users can use this guide to manage the datafiles and database. This document provides a description of the relational and spatial information present in FEMIS. It describes how the data was assembled, loaded, and managed while the system is in operation.

Burnett, R.A.; Downing, T.R.; Gaustad, K.L.; Hoza, M.; Johnson, S.M.; Loveall, R.M.; Millard, W.D.; Winters, C.; Wood, B.M.

1996-12-01T23:59:59.000Z

119

Environmental Management System `We are implementing an  

E-Print Network [OSTI]

in our Environmental Policy Statement. Specifically we will: · Comply with relevant environmental. · Publishing an environmental policy which sets out our key targets (see opposite). · EstablishingEnvironmental Management System `We are implementing an Environmental Management System to address

120

Integrated Vehicle Thermal Management Systems (VTMS) Analysis...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Integrated Vehicle Thermal Management Power Electronic Thermal System Performance and Integration Characterization and Development of Advanced Heat Transfer Technologies...

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

COURSE PROGRAM MANAGEMENT OF EDUCATIONAL SYSTEMS  

E-Print Network [OSTI]

1 « » COURSE PROGRAM MANAGEMENT OF EDUCATIONAL SYSTEMS Author : O. Mashkina, Ph.D. 1 and processes in education management. In current circumstances, a priority of the national educational system features of the education system management in the modern environment; - lay the theoretic

Kaplan, Alexander

122

Traffic Management System Performance November 11, 2002  

E-Print Network [OSTI]

Traffic Management System Performance November 11, 2002 David Levinson1 Wei Chen2 Department uses regression analysis to evaluate long-run traffic management system performance. Three important traffic management systems in the Twin Cities metro area - Ramp Metering, Variable Message Signs (VMS

Levinson, David M.

123

CERTIFICATE OF REGISTRATION Quality Management Systems  

E-Print Network [OSTI]

CERTIFICATE OF REGISTRATION Quality Management Systems INDIAN AGRICULTURAL STATISTICS RESEARCH Certifications Limited Certifies that the Management System of the above mentioned Company has been assessed and meets the requirements established by the following rules: ISO 9001 :2008 The Management System Includes

Rodriguez, Carlos

124

Integrated Building Management System (IBMS)  

SciTech Connect (OSTI)

This project provides a combination of software and services that more easily and cost-effectively help to achieve optimized building performance and energy efficiency. Featuring an open-platform, cloud- hosted application suite and an intuitive user experience, this solution simplifies a traditionally very complex process by collecting data from disparate building systems and creating a single, integrated view of building and system performance. The Fault Detection and Diagnostics algorithms developed within the IBMS have been designed and tested as an integrated component of the control algorithms running the equipment being monitored. The algorithms identify the normal control behaviors of the equipment without interfering with the equipment control sequences. The algorithms also work without interfering with any cooperative control sequences operating between different pieces of equipment or building systems. In this manner the FDD algorithms create an integrated building management system.

Anita Lewis

2012-07-01T23:59:59.000Z

125

System safety management lessons learned  

SciTech Connect (OSTI)

The Assistant Secretary of the Army for Research, Development and Acquisition directed the Army Safety Center to provide an audit of the causes of accidents and safety of use restrictions on recently fielded systems by tracking residual hazards back through the acquisition process. The objective was to develop ''lessons learned'' that could be applied to the acquisition process to minimize mishaps in fielded systems. System safety management lessons learned are defined as Army practices or policies, derived from past successes and failures, that are expected to be effective in eliminating or reducing specific systemic causes of residual hazards. They are broadly applicable and supportive of the Army structure and acquisition objectives. 29 refs., 7 figs.

Piatt, J.A.

1989-05-01T23:59:59.000Z

126

System Description for the KW Basin Integrated Water Treatment System (IWTS) (70.3)  

SciTech Connect (OSTI)

This is a description of the system that collects and processes the sludge and radioactive ions released by the spent nuclear fuel (SNF) processing operations conducted in the 105 KW Basin. The system screens, settles, filters, and conditions the basin water for reuse. Sludge and most radioactive ions are removed before the water is distributed back to the basin pool. This system is part of the Spent Nuclear Fuel Project (SNFP).

DERUSSEAU, R.R.

2000-04-18T23:59:59.000Z

127

PIA - INL SECURITY INFORMATION MANAGEMENT SYSTEM BUSINESS ENCLAVE...  

Office of Environmental Management (EM)

INL SECURITY INFORMATION MANAGEMENT SYSTEM BUSINESS ENCLAVE PIA - INL SECURITY INFORMATION MANAGEMENT SYSTEM BUSINESS ENCLAVE PIA - INL SECURITY INFORMATION MANAGEMENT SYSTEM...

128

Electronic Document Management System PIA, BechtelJacobs Company...  

Energy Savers [EERE]

Electronic Document Management System PIA, BechtelJacobs Company, LLC Electronic Document Management System PIA, BechtelJacobs Company, LLC Electronic Document Management System...

129

Distrbuted Sensing Systems for Water Quality Assesment and Management  

E-Print Network [OSTI]

Sensing Systems for Water Quality Assessment and ManagementSensing Systems for Water Quality Assessment and ManagementSensing Systems for Water Quality Assessment and Management

2007-01-01T23:59:59.000Z

130

Contract Management Using Industrial Energy Management & Reporting Systems  

E-Print Network [OSTI]

Energy Management and Reporting Systems (EMRS) are rule-based control systems with a record of reducing energy usage and CO2e emissions while optimizing electrical generation in a real time environment. The rule set successfully optimizes energy...

Robinson, J. E.

2011-01-01T23:59:59.000Z

131

SWEPP Assay System Version 2.0 software design description  

SciTech Connect (OSTI)

The Idaho National Engineering Laboratory (INEL) Stored Waste Examination Pilot Plant (SWEPP) operations staff use nondestructive analysis methods to characterize the radiological contents of contact-handled radioactive waste containers. Containers of waste from Rocky Flats Environmental Technology Site and other Department of Energy (DOE) sites are currently stored at SWEPP. Before these containers can be shipped to the Waste Isolation Pilot Plant (WIPP), SWEPP must verify compliance with storage, shipping, and disposal requirements. This program has been in operation since 1985 at the INEL Radioactive Waste Management Complex (RWMC). One part of the SWEPP program measures neutron emissions from the containers and estimates the mass of plutonium and other transuranic (TRU) isotopes present. A Passive/Active Neutron (PAN) assay system developed at the Los Alamos National Laboratory is used to perform these measurements. A computer program named NEUT2 was originally used to perform the data acquisition and reduction functions for the neutron measurements. This program was originally developed at Los Alamos and extensively modified by a commercial vendor of PAN systems and by personnel at the INEL. NEUT2 uses the analysis methodology outlined, but no formal documentation exists on the program itself. The SWEPP Assay System (SAS) computer program replaced the NEUT2 program in early 1994. The SAS software was developed using an `object model` approach and is documented in accordance with American National Standards Institute (ANSI) and Institute of Electrical and Electronic Engineers (IEEE) standards. The new program incorporates the basic analysis algorithms found in NEUT2. Additional functionality and improvements include a graphical user interface, the ability to change analysis parameters without program code modification, an `object model` design approach and other features for improved flexibility and maintainability.

East, L.V.; Marwil, E.S.

1996-08-01T23:59:59.000Z

132

Integrated Brush Management Systems for Texas  

E-Print Network [OSTI]

Integrated Brush Management Systems (IBMS) involve careful analysis of range resources and ranch goals in order to develop solutions to brush problems. Successful use of IBMS should result in improved management processes and greater profitability...

Hanselka, C. Wayne; Hamilton, Wayne T.; Rector, Barron S.

2001-01-04T23:59:59.000Z

133

Concept of Operations for Real-time Airborne Management System  

SciTech Connect (OSTI)

The purpose of this document is to describe the operating concepts, capabilities, and benefits of RAMS including descriptions of how the system implementations can improve emergency response, damage assessment, task prioritization, and situation awareness. This CONOPS provides general information on operational processes and procedures required to utilize RAMS, and expected performance benefits of the system. The primary audiences for this document are the end users of RAMS (including flight operators and incident commanders) and the RAMS management team. Other audiences include interested offices within the Department of Homeland Security (DHS), and officials from other state and local jurisdictions who want to implement similar systems.

Barr, Jonathan L.; Taira, Randal Y.; Orr, Heather M.

2013-03-04T23:59:59.000Z

134

Information Systems Management (ISM) 2011 Department of Supply Chain & Information Systems  

E-Print Network [OSTI]

Information Systems Management (ISM) 2011 Department of Supply Chain & Information Systems Information Systems Management Minor Application Overview The Information Systems Management focuses Systems Management and Applications c. MIS 431 (3) Business Data Management d. MIS 446 (3) Information

Yener, Aylin

135

Description of Transmutation Library for Fuel Cycle System Analyses  

SciTech Connect (OSTI)

This report documents the Transmutation Library that is used in Fuel Cycle System Analyses. This version replaces the 2008 version.[Piet2008] The Transmutation Library has the following objectives: • Assemble past and future transmutation cases for system analyses. • For each case, assemble descriptive information such as where the case was documented, the purpose of the calculation, the codes used, source of feed material, transmutation parameters, and the name of files that contain raw or source data. • Group chemical elements so that masses in separation and waste processes as calculated in dynamic simulations or spreadsheets reflect current thinking of those processes. For example, the CsSr waste form option actually includes all Group 1A and 2A elements. • Provide mass fractions at input (charge) and output (discharge) for each case. • Eliminate the need for either “fission product other” or “actinide other” while conserving mass. Assessments of waste and separation cannot use “fission product other” or “actinide other” as their chemical behavior is undefined. • Catalog other isotope-specific information in one place, e.g., heat and dose conversion factors for individual isotopes. • Describe the correlations for how input and output compositions change as a function of UOX burnup (for LWR UOX fuel) or fast reactor (FR) transuranic (TRU) conversion ratio (CR) for either FR-metal or FR-oxide. This document therefore includes the following sections: • Explanation of the data set information, i.e., the data that describes each case. In no case are all of the data presented in the Library included in previous documents. In assembling the Library, we return to raw data files to extract the case and isotopic data, into the specified format. • Explanation of which isotopes and elements are tracked. For example, the transition metals are tracked via the following: two Zr isotopes, Zr-other, Tc99, Tc-other, two Mo-Ru-Rh-Pd isotopes, Mo-Ru-Rh-Pd-other, four other specific TM isotopes, and TM-other. Mo-Ru-Rh-Pd are separated because their content constrains the loading of waste in glass, so we have to know the mass of those elements independent of others. • Rules for collapsing long lists of isotopes (~1000) to the 81 items in the library. For each tracked isotope, we define which short-lived isotopes’ mass (at t=0) is included with the mass of the tracked isotope at t=0, which short-lived radioactive progeny must be accounted for when the tracked isotope decays, and to which of the other 80 items the mass of the tracked isotope goes when it decays. • Explanation of where raw data files can be found on the fuel cycle data portal. • Explanation of generic cross section sets • Explanation of isotope-specific parameters such as heat and dose conversion factors • Explanation of the LWR UOX burnup and FR TRU CR correlations.

Steven J. Piet; Samuel E. Bays; Edward A. Hoffman

2010-08-01T23:59:59.000Z

136

Automated transportation management system (ATMS) software project management plan (SPMP)  

SciTech Connect (OSTI)

The Automated Transportation Management System (ATMS) Software Project Management plan (SPMP) is the lead planning document governing the life cycle of the ATMS and its integration into the Transportation Information Network (TIN). This SPMP defines the project tasks, deliverables, and high level schedules involved in developing the client/server ATMS software.

Weidert, R.S., Westinghouse Hanford

1996-05-20T23:59:59.000Z

137

MANAGEMENT INFORMATION SYSTEMS (MIS) CONCENTRATION FOR UNDERGRADUATES  

E-Print Network [OSTI]

MANAGEMENT INFORMATION SYSTEMS (MIS) CONCENTRATION FOR UNDERGRADUATES The management information systems concentration, like a major, focuses on the use of information technology for value creation creation. Link to Rensselaer 2012-2013 Catalog Required Courses MGMT 4240 Systems Analysis & Design MGMT

Salama, Khaled

138

A model for international border management systems.  

SciTech Connect (OSTI)

To effectively manage the security or control of its borders, a country must understand its border management activities as a system. Using its systems engineering and security foundations as a Department of Energy National Security Laboratory, Sandia National Laboratories has developed such an approach to modeling and analyzing border management systems. This paper describes the basic model and its elements developed under Laboratory Directed Research and Development project 08-684.

Duggan, Ruth Ann

2008-09-01T23:59:59.000Z

139

Data Management Guide: Integrated Baseline System (IBS). Version 2.1  

SciTech Connect (OSTI)

The Integrated Baseline System (IBS) is an emergency management planning and analysis tool that is being developed under the direction of the US Army Nuclear and Chemical Agency (USANCA). The IBS Data Management Guide provides the background, as well as the operations and procedures needed to generate and maintain a site-specific map database. Data and system managers use this guide to manage the data files and database that support the administrative, user-environment, database management, and operational capabilities of the IBS. This document provides a description of the data files and structures necessary for running the IBS software and using the site map database.

Bower, J.C. [Bower Software Services, Kennewick, Washington (United States)] Bower Software Services, Kennewick, Washington (United States); Burford, M.J.; Downing, T.R.; Moise, M.C.; Williams, J.R. [Pacific Northwest Lab., Richland, WA (United States)] Pacific Northwest Lab., Richland, WA (United States)

1995-01-01T23:59:59.000Z

140

System Design Description and Requirements for Modeling the Off-Gas Systems for Fuel Recycling Facilities  

SciTech Connect (OSTI)

This document provides descriptions of the off-gases evolved during spent nuclear fuel processing and the systems used to capture the gases of concern. Two reprocessing techniques are discussed, namely aqueous separations and electrochemical (pyrochemical) processing. The unit operations associated with each process are described in enough detail so that computer models to mimic their behavior can be developed. The document also lists the general requirements for the desired computer models.

Daryl R. Haefner; Jack D. Law; Troy J. Tranter

2010-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

System Description of a SAT-based CSP Solver Naoyuki Tamura1  

E-Print Network [OSTI]

System Description of a SAT-based CSP Solver Sugar Naoyuki Tamura1 , Tomoya Tanjo2 , and Mutsunori description of a SAT-based CSP solver Sugar submitted to the Third International CSP Solver Compe- tition. The Sugar solver solves a finite linear CSP and MAX-CSP by translating it into a SAT problem using the order

Banbara, Mutsunori

142

Waste Management Information System (WMIS) User Guide  

SciTech Connect (OSTI)

This document provides the user of the Waste Management Information System (WMIS) instructions on how to use the WMIS software. WMIS allows users to initiate, track, and close waste packages. The modular design supports integration and utilization of data throuh the various stages of waste management. The phases of the waste management work process include generation, designation, packaging, container management, procurement, storage, treatment, transportation, and disposal.

R. E. Broz

2008-12-22T23:59:59.000Z

143

Privacy Impact Assessment OFEO Facilities Management System Facilities Center  

E-Print Network [OSTI]

Privacy Impact Assessment OFEO Facilities Management System ­ Facilities Center I. System Identification 1. IT System Name: Facilities Management System - FacilityCenter 2. IT System Sponsor: Office. IT System Manager: Michelle T. Gooch, Facilities Management Systems Manager 5. PIA Author: Michelle T. Gooch

Mathis, Wayne N.

144

Implementation Guide for Integrating Environmental Management Systems into Integrated Safety Management Systems  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide provides guidance to assist DOE sites in identifying those missing environmental management systems elements and integrating them into the site's integrated safety management system. Canceled by DOE N 251.96.

2004-08-20T23:59:59.000Z

145

A geometric Hamiltonian description of composite quantum systems and quantum entanglement  

E-Print Network [OSTI]

Finite-dimensional Quantum Mechanics can be geometrically formulated as a proper classical-like Hamiltonian theory in a projective Hilbert space. The description of composite quantum systems within the geometric Hamiltonian framework is discussed in this paper. As summarized in the first part of this work, in the Hamiltonian formulation the phase space of a quantum system is the Kahler manifold given by the complex projective space P(H) of the Hilbert space H of the considered quantum theory. However the phase space of a bipartite system must be given by the projective space of the tensor product of two Hilbert spaces H and K and not simply by the cartesian product P(H)xP(K) as suggested by the analogy with Classical Mechanics. A part of this paper is devoted to manage this problem. In the second part of the work, a definition of quantum entanglement and a proposal of entanglement measure are given in terms of a geometrical point of view (a rather studied topic in recent literature). Finally two known separability criteria are implemented in the Hamiltonian formalism.

Davide Pastorello

2014-08-08T23:59:59.000Z

146

IWater Processing and Waste Management SystemsIntegrated System Health Management 2007 Phase II  

E-Print Network [OSTI]

SBIR SBIR 44 45 IWater Processing and Waste Management SystemsIntegrated System Health Management valuable and, in some cases, critical features for Integrated System Health Management (ISHM) developersDE DP) to TRL 6 or higher. To facilitate Phase III NASA transition, the second program goal is deploying

147

Fermilab | FRA Contractor Assurance System (CAS) | Management...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

M8) Quality 1.0 Purpose 2.0 Roles and Responsibilities 3.0 Management System Operation 4.0 References 5.0 Processes Supporting System 6.0 Reviews, Audits and Reports Quality...

148

VISUAL DESCRIPTION OF HYBRID SYSTEMS Radu Grosu, Thomas Stauner1  

E-Print Network [OSTI]

may be fatal in the safety critical environment of many hybrid systems. In this paper we present-time systems interacting with their physical environment. In the past few years a number of formalisms have height control system (EHC), taken from a former case study together with BMW. The purpose of this system

149

MANAGED OBJECT PATTERN Class Behavioral Provide direct control of individual resources in a managed system. The Managed Object  

E-Print Network [OSTI]

in a managed system. The Managed Object provides a one-to-one mapping to the manageable entities, as well system, in which case the Manager-Agent pattern might be more appropriate). #12;2 / 4 Structure management systems to learn about the contents of the MIB. · Managed Object - Represents a single resource

Keller, Rudolf K.

150

Systems Engineering Integrating Project Management, Science, Engineering, and  

E-Print Network [OSTI]

Systems Engineering Integrating Project Management, Science, Engineering, and Mission Operations Capabilities LASP performs comprehensive systems engineering. Systems engineers develop and manage requirements · Technical coordination · System architecture and design process · Requirements definition and management

Mojzsis, Stephen J.

151

Main Principles of the Perspective System of SNF Management in Russia - 13333  

SciTech Connect (OSTI)

For the last several years the System of the Spent Nuclear Fuel management in Russia was seriously changed. The paper describes the main principles of the changes and the bases of the Perspective System of SNF Management in Russia. Among such the bases there are the theses with the interesting names like 'total knowledge', 'pollutant pays' and 'pay and forget'. There is also a brief description of the modern Russian SNF Management Infrastructure. And an outline of the whole System. The System which is - in case of Russia - is quite necessary to adjust SNF accumulation and to utilize the nuclear heritage. (authors)

Baryshnikov, Mikhail [Project Office for SNF Management, Russian State Atomic Energy Corporation 'ROSATOM', Bolshaya Ordynka str., 24, Moscow, 119017 (Russian Federation)] [Project Office for SNF Management, Russian State Atomic Energy Corporation 'ROSATOM', Bolshaya Ordynka str., 24, Moscow, 119017 (Russian Federation)

2013-07-01T23:59:59.000Z

152

Description & Careers Supply Chain Management is how business gets done. Supply chain management spans all movement and storage of raw  

E-Print Network [OSTI]

management spans all movement and storage of raw materials, work-in-process inventory, and finished goods managers of supply chains, resource managers of material or manufacturing resources planning (MRPDescription & Careers The Field Supply Chain Management is how business gets done. Supply chain

Lin, Xiaodong

153

The maximum entropy tecniques and the statistical description of systems  

E-Print Network [OSTI]

The maximum entropy technique (MENT) is used to determine the distribution functions of physical values. MENT naturally combines required maximum entropy, the properties of a system and connection conditions in the form of restrictions imposed on the system. It can, therefore, be employed to statistically describe closed and open systems. Examples in which MENT is used to describe equilibrium and non-equilibrium states, as well as steady states that are far from being in thermodynamic equilibrium, are discussed.

B. Z. Belashev; M. K. Suleymanov

2001-10-19T23:59:59.000Z

154

Cold Vacuum Drying facility effluent drains system design description (SYS 18)  

SciTech Connect (OSTI)

The Cold Vacuum Drying (CVD) Facility provides required process systems, supporting equipment, and facilities needed for the Spent Nuclear Fuel (SNF) mission. This system design description (SDD) addresses the effluent drain system (EFS), which supports removal of water from the process bay floors. The discussion that follows is limited to piping, valves, components, and the process bay floor drain retention basin.

TRAN, Y.S.

2000-05-11T23:59:59.000Z

155

POOL WATER TREATMENT AND COOLING SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Pool Water Treatment and Cooling System is located in the Waste Handling Building (WHB), and is comprised of various process subsystems designed to support waste handling operations. This system maintains the pool water temperature within an acceptable range, maintains water quality standards that support remote underwater operations and prevent corrosion, detects leakage from the pool liner, provides the capability to remove debris from the pool, controls the pool water level, and helps limit radiological exposure to personnel. The pool structure and liner, pool lighting, and the fuel staging racks in the pool are not within the scope of the Pool Water Treatment and Cooling System. Pool water temperature control is accomplished by circulating the pool water through heat exchangers. Adequate circulation and mixing of the pool water is provided to prevent localized thermal hotspots in the pool. Treatment of the pool water is accomplished by a water treatment system that circulates the pool water through filters, and ion exchange units. These water treatment units remove radioactive and non-radioactive particulate and dissolved solids from the water, thereby providing the water clarity needed to conduct waste handling operations. The system also controls pool water chemistry to prevent advanced corrosion of the pool liner, pool components, and fuel assemblies. Removal of radioactivity from the pool water contributes to the project ALARA (as low as is reasonably achievable) goals. A leak detection system is provided to detect and alarm leaks through the pool liner. The pool level control system monitors the water level to ensure that the minimum water level required for adequate radiological shielding is maintained. Through interface with a demineralized water system, adequate makeup is provided to compensate for loss of water inventory through evaporation and waste handling operations. Interface with the Site Radiological Monitoring System provides continuous radiological monitoring of the pool water. The Pool Water Treatment and Cooling System interfaces with the Waste Handling Building System, Site-Generated Radiological Waste Handling System, Site Radiological Monitoring System, Waste Handling Building Electrical System, Site Water System, and the Monitored Geologic Repository Operations Monitoring and Control System.

V. King

2000-06-19T23:59:59.000Z

156

SWEPP Gamma-Ray Spectrometer System software design description  

SciTech Connect (OSTI)

To assist in the characterization of the radiological contents of contract-handled waste containers at the Stored Waste Examination Pilot Plant (SWEPP), the SWEPP Gamma-Ray Spectrometer (SGRS) System has been developed by the Radiation Measurements and Development Unit of the Idaho National Engineering Laboratory. The SGRS system software controls turntable and detector system activities. In addition to determining the concentrations of gamma-ray-emitting radionuclides, this software also calculates attenuation-corrected isotopic mass ratios of-specific interest. This document describes the software design for the data acquisition and analysis software associated with the SGRS system.

Femec, D.A.; Killian, E.W.

1994-08-01T23:59:59.000Z

157

Cold Vacuum Drying (CVD) Electrical System Design Description  

SciTech Connect (OSTI)

This document provides a technical explanation of the design and operation of the electrical system for the Cold Vacuum Drying Facility. This document identifies the requirements, and the basis for the requirements and details on how the requirements have been implemented in the design and construction of the facility. This document also provides general guidance for the surveillance, testing, and maintenance of this system.

BRISBIN, S.A.

1999-06-17T23:59:59.000Z

158

A Systems Approach to Managing Oil  

E-Print Network [OSTI]

A Systems Approach to Managing Oil Transportation Risk in Prince William Sound Jason R. W. Merrick Received April 21, 2000; revised June 12, 2000; accepted June 26, 2000MANAGING OIL TRANSPORTATION RISK about the safety of oil transportation in the Prince William Sound, Alaska. As a result, a large number

van Dorp, Johan René

159

W-314, waste transfer alternative piping system description  

SciTech Connect (OSTI)

It is proposed that the reliability, operability, and flexibility of the Retrieval Transfer System be substantially upgraded by replacing the planned single in-farm pipeline from the AN-AY-AZ-(SY) Tank Farm Complex to the AP Farm with three parallel pipelines outside the tank farms. The proposed system provides simplified and redundant routes for the various transfer missions, and prevents the risk of transfer gridlock when the privatization effort swings into full operation.

Papp, I.G.

1998-04-30T23:59:59.000Z

160

CARRIER PREPARATION BUILDING MATERIALS HANDLING SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Carrier Preparation Building Materials Handling System receives rail and truck shipping casks from the Carrier/Cask Transport System, and inspects and prepares the shipping casks for return to the Carrier/Cask Transport System. Carrier preparation operations for carriers/casks received at the surface repository include performing a radiation survey of the carrier and cask, removing/retracting the personnel barrier, measuring the cask temperature, removing/retracting the impact limiters, removing the cask tie-downs (if any), and installing the cask trunnions (if any). The shipping operations for carriers/casks leaving the surface repository include removing the cask trunnions (if any), installing the cask tie-downs (if any), installing the impact limiters, performing a radiation survey of the cask, and installing the personnel barrier. There are four parallel carrier/cask preparation lines installed in the Carrier Preparation Building with two preparation bays in each line, each of which can accommodate carrier/cask shipping and receiving. The lines are operated concurrently to handle the waste shipping throughputs and to allow system maintenance operations. One remotely operated overhead bridge crane and one remotely operated manipulator is provided for each pair of carrier/cask preparation lines servicing four preparation bays. Remotely operated support equipment includes a manipulator and tooling and fixtures for removing and installing personnel barriers, impact limiters, cask trunnions, and cask tie-downs. Remote handling equipment is designed to facilitate maintenance, dose reduction, and replacement of interchangeable components where appropriate. Semi-automatic, manual, and backup control methods support normal, abnormal, and recovery operations. Laydown areas and equipment are included as required for transportation system components (e.g., personnel barriers and impact limiters), fixtures, and tooling to support abnormal and recovery operations. The Carrier Preparation Building Materials Handling System interfaces with the Cask/Carrier Transport System to move the carriers to and from the system. The Carrier Preparation Building System houses the equipment and provides the facility, utility, safety, communications, and auxiliary systems supporting operations and protecting personnel.

E.F. Loros

2000-06-28T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Methods of forming thermal management systems and thermal management methods  

DOE Patents [OSTI]

A thermal management system for a vehicle includes a heat exchanger having a thermal energy storage material provided therein, a first coolant loop thermally coupled to an electrochemical storage device located within the first coolant loop and to the heat exchanger, and a second coolant loop thermally coupled to the heat exchanger. The first and second coolant loops are configured to carry distinct thermal energy transfer media. The thermal management system also includes an interface configured to facilitate transfer of heat generated by an internal combustion engine to the heat exchanger via the second coolant loop in order to selectively deliver the heat to the electrochemical storage device. Thermal management methods are also provided.

Gering, Kevin L.; Haefner, Daryl R.

2012-06-05T23:59:59.000Z

162

Wie beantrage ich das Zertifikat ,,Quality System Manager Junior"  

E-Print Network [OSTI]

Wie beantrage ich das Zertifikat ,,Quality System Manager Junior" und was kostet es Jochem DGQ Quality System Manager - Junior - Die Zusatzqualifikation für Studierende der Technischen Universität Berlin #12;Was ist der Quality Systems Manager - Junior -? Die Bedeutung des Qualitätsmanagements

Berlin,Technische Universität

163

SLAC Management Systems Larry Dardzinski/Ops/x4794  

E-Print Network [OSTI]

SLAC Management Systems PPA Update 24 May 12 Larry Dardzinski/Ops/x4794 #12;Outline · Management · Discussion Page 2 #12;A simple definition of a Management System A management system is the means by which of Management Systems? · Allow your customers and users to efficiently and effectively access your services

Wechsler, Risa H.

164

Electronic Resource Management Systems From ILS Vendors  

E-Print Network [OSTI]

For several years libraries, especially larger libraries and research libraries, have been more and more desperately seeking systems and tools to help them manage electronic resources for several years. To date, most ...

Duranceau, Ellen

165

Uncanistered Spent Nuclear fuel Disposal Container System Description Document  

SciTech Connect (OSTI)

The Uncanistered Spent Nuclear Fuel (SNF) Disposal Container System supports the confinement and isolation of waste within the Engineered Barrier System of the Monitored Geologic Repository (MGR). Disposal containers are loaded with intact uncanistered assemblies and/or individually canistered SNF assemblies and sealed in the surface waste handling facilities, transferred to the underground through the access drifts, and emplaced in the emplacement drifts. The Uncanistered SNF Disposal Container provides long-term confinement of the commercial SNF placed inside, and withstands the loading, transfer, emplacement, and retrieval loads and environments. The Uncanistered SNF Disposal Container System provides containment of waste for a designated period of time, and limits radionuclide release. The disposal container maintains the waste in a designated configuration, withstands maximum handling and rockfall loads, limits the individual SNF assembly temperatures after emplacement, limits the introduction of moderator into the disposal container during the criticality control period, resists corrosion in the expected handling and repository environments, and provides containment of waste in the event of an accident. Multiple boiling water reactor (BWR) and pressurized water reactor (PWR) disposal container designs are needed to accommodate the expected range of spent fuel assemblies and provide long-term confinement of the commercial SNF. The disposal container will include outer and inner cylinder walls, outer cylinder lids (two on the top, one on the bottom), inner cylinder lids (one on the top, one on the bottom), and an internal metallic basket structure. Exterior labels will provide a means by which to identify the disposal container and its contents. The two metal cylinders, in combination with the cladding, Emplacement Drift System, drip shield, and natural barrier, will support the design philosophy of defense-in-depth. The use of materials with different properties prevents a single mode failure from breaching the waste package. The inner cylinder and inner cylinder lids will be constructed of stainless steel and the outer cylinder and outer cylinder lid will be made of high-nickel alloy. The basket will assist criticality control, provide structural support, and improve heat transfer. The Uncanistered SNF Disposal Container System interfaces with the emplacement drift environment and internal waste by transferring heat from the SNF to the external environment and by protecting the SFN assemblies and their contents from damage/degradation by the external environment. The system also interfaces with the SFN by limiting access of moderator and oxidizing agents of the SFN. The waste package interfaces with the Emplacement Drift System's emplacement drift pallets upon which the wasted packages are placed. The disposal container interfaces with the Assembly Transfer System, Waste Emplacement/Retrieval System, Disposal Container Handling System, and Waste Package Remediation System during loading, handling, transfer, emplacement and retrieval of the disposal container/waste package.

NONE

2000-10-12T23:59:59.000Z

166

Integrated Safety Management System Guide  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The guide provide DOE line management information useful for implementing the provisions of DOE P 450.4A and the requirements and responsibilities of DOE O 450.2. Cancels and supersedes DOE G 450.4-1B and DOE G 450.3-3.

2011-09-29T23:59:59.000Z

167

West Valley transfer cart control system design description  

SciTech Connect (OSTI)

Detail design of the control system for the West Valley Nuclear Services Vitrification Facility transfer cart has been completed by Oak Ridge National Laboratory. This report documents the requirements and describes the detail design of that equipment and control software. Copies of significant design documents including analysis and testing reports and design drawings are included in the Appendixes.

Bradley, E.C.; Crutcher, R.I.; Halliwell, J.W.; Hileman, M.S.; Moore, M.R.; Nodine, R.N.; Ruppel, F.R.; Vandermolen, R.I.

1993-01-01T23:59:59.000Z

168

The Next Generation Energy Management System Design  

E-Print Network [OSTI]

Paul Myrda, EPRI Naim Logic SRP George Stefopoulos, NYPA Michael Swider, New York ISO. i #12;iiThe Next Generation Energy Management System Design Final Project Report Power Systems Engineering Research Center Empowering Minds to Engineer the Future Electric Energy System #12;#12;The Next Generation

169

Composition of Management System for Smart Homes  

E-Print Network [OSTI]

The paper addresses modular hierarchical design (composition) of a management system for smart homes. The management system consists of security subsystem (access control, alarm control), comfort subsystem (temperature, etc.), intelligence subsystem (multimedia, houseware). The design solving process is based on Hierarchical Morphological Multicriteria Design (HMMD) approach: (1) design of a tree-like system model, (2) generation of design alternatives for leaf nodes of the system model, (3) Bottom-Up process: (i) multicriteria selection of design alternatives for system parts/components and (ii) composing the selected alternatives into a resultant combination (while taking into account ordinal quality of the alternatives above and their compatibility). A realistic numerical example illustrates the design process of a management system for smart homes.

Levin, Mark Sh; Klapproth, Alexander

2011-01-01T23:59:59.000Z

170

Minor in Science of Natural and Environmental Systems DESCRIPTION OF THE MINOR  

E-Print Network [OSTI]

Minor in Science of Natural and Environmental Systems DESCRIPTION OF THE MINOR The Minor Program of Agriculture and Life Sciences Science of Natural and Environmental Systems Admission to Minor Program of Study* ______ ___________ NtRes 2201: Society and Natural Resources* ______ ___________ SNES 2000: Environmental Sciences

Chen, Tsuhan

171

Department of Energy Project Management System  

SciTech Connect (OSTI)

This manual provides guidance to all appropriate personnel for implementation of DOE Project Management Policy. It sets forth the principles and requirements that govern the development, approval, and execution of DOE's outlay programs as embodied within the Project Management System (PMS). Its primary goal is to assure application of sound management principles providing a disciplined, systematic, and coordinated approach resulting in efficient planning, organization, coordination, budgeting, management, review, and control of DOE projects. The provisions of this manual are mandatory for the Department's Major Systems Acquisitions (MSA's) and Major Projects and will be used for other projects to the extent practicable. Department's project-management task is over 250 projects, with a total estimated cost in excess of $24 billion at completion. This diverse array of project activities requires a broad spectrum of scientific, engineering, and management skills to assure that they meet planned technical and other objectives and are accomplished on schedule, within cost and scope, and that they serve the purposes intended. In recognition of these requirements and the Department's ever-increasing magnitude of responsibilities, an interim Project Management System was established and has been in use for over a year. This manual constitutes an update of the system based on the experience gained and lessons learned during this initial period.

Not Available

1981-01-08T23:59:59.000Z

172

System Advisor Model, SAM 2014.1.14: General Description  

SciTech Connect (OSTI)

This document describes the capabilities of the U.S. Department of Energy and National Renewable Energy Laboratory's System Advisor Model (SAM), Version 2013.9.20, released on September 9, 2013. SAM is a computer model that calculates performance and financial metrics of renewable energy systems. Project developers, policy makers, equipment manufacturers, and researchers use graphs and tables of SAM results in the process of evaluating financial, technology, and incentive options for renewable energy projects. SAM simulates the performance of photovoltaic, concentrating solar power, solar water heating, wind, geothermal, biomass, and conventional power systems. The financial model can represent financial structures for projects that either buy and sell electricity at retail rates (residential and commercial) or sell electricity at a price determined in a power purchase agreement (utility). SAM's advanced simulation options facilitate parametric and sensitivity analyses, and statistical analysis capabilities are available for Monte Carlo simulation and weather variability (P50/P90) studies. SAM can also read input variables from Microsoft Excel worksheets. For software developers, the SAM software development kit (SDK) makes it possible to use SAM simulation modules in their applications written in C/C++, C#, Java, Python, and MATLAB. NREL provides both SAM and the SDK as free downloads at http://sam.nrel.gov. Technical support and more information about the software are available on the website.

Blair, N.; Dobos, A. P.; Freeman, J.; Neises, T.; Wagner, M.; Ferguson, T.; Gilman, P.; Janzou, S.

2014-02-01T23:59:59.000Z

173

System Advisor Model, SAM 2011.12.2: General Description  

SciTech Connect (OSTI)

This document describes the capabilities of the U.S. Department of Energy and National Renewable Energy Laboratory's System Advisor Model (SAM), Version 2011.12.2, released on December 2, 2011. SAM is software that models the cost and performance of renewable energy systems. Project developers, policy makers, equipment manufacturers, and researchers use graphs and tables of SAM results in the process of evaluating financial, technology, and incentive options for renewable energy projects. SAM simulates the performance of solar, wind, geothermal, biomass, and conventional power systems. The financial model can represent financing structures for projects that either buy and sell electricity at retail rates (residential and commercial) or sell electricity at a price determined in a power purchase agreement (utility). Advanced analysis options facilitate parametric, sensitivity, and statistical analyses, and allow for interfacing SAM with Microsoft Excel or with other computer programs. SAM is available as a free download at http://sam.nrel.gov. Technical support and more information about the software are available on the website.

Gilman, P.; Dobos, A.

2012-02-01T23:59:59.000Z

174

Security Analysis and Project Management Systems | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Security Analysis and Project Management Systems SHARE Security Analysis and Project Management Systems ORNL brings together the subject matter experts with programmers to design,...

175

Earned Value Management System (EVMS) and Project Analysis Standard...  

Broader source: Energy.gov (indexed) [DOE]

Management System (EVMS) and Project Analysis Standard Operating Procedure (EPASOP)- March 2014 Earned Value Management System (EVMS) and Project Analysis Standard Operating...

176

V-125: Cisco Connected Grid Network Management System Multiple...  

Broader source: Energy.gov (indexed) [DOE]

5: Cisco Connected Grid Network Management System Multiple Vulnerabilities V-125: Cisco Connected Grid Network Management System Multiple Vulnerabilities April 3, 2013 - 1:44am...

177

Office of Personnel Management (OPM) Billing System PIA, Office...  

Office of Environmental Management (EM)

Office of Personnel Management (OPM) Billing System PIA, Office of Health, Safety and Security Office of Personnel Management (OPM) Billing System PIA, Office of Health, Safety and...

178

Integrated Safety Management System as the Basis for Work Planning...  

Broader source: Energy.gov (indexed) [DOE]

Integrated Safety Management System as the Basis for Work Planning and Control for Research and Development Integrated Safety Management System as the Basis for Work Planning and...

179

Concept for Management of the Future Electricity System (Smart...  

Open Energy Info (EERE)

Management of the Future Electricity System (Smart Grid Project) Jump to: navigation, search Project Name Concept for Management of the Future Electricity System Country Denmark...

180

Guidance for FY2014 Facilities Information Management System...  

Office of Environmental Management (EM)

Guidance for FY2014 Facilities Information Management System Data Validations Guidance for FY2014 Facilities Information Management System Data Validations FY 2014 FIMS Data...

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Energy Management Systems Package for Small Commercial Buildings...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Management Systems Package for Small Commercial Buildings Energy Management Systems Package for Small Commercial Buildings Commercial Buildings Integration Project for the...

182

Energy Management and Information Systems Study - 2014 BTO Peer...  

Energy Savers [EERE]

Management and Information Systems Study - 2014 BTO Peer Review Energy Management and Information Systems Study - 2014 BTO Peer Review Presenter: Jessica Granderson, Lawrence...

183

The design and implementation of the buffer manager for an experimental relational database management system  

E-Print Network [OSTI]

Buffer management is an essential component of database management. This thesis presents a design and implementation of the buffer manager for an experimental relational database management system. The relationship and difference between database...

Li, Zaichun

1994-01-01T23:59:59.000Z

184

Application of Management Frameworks: A Case Study on Managing Workflow related Systems  

E-Print Network [OSTI]

Application of Management Frameworks: A Case Study on Managing Workflow related Systems Srinath management of a system involves much more complexities than just closing the control loop by implementing management usecase for managing workflow related systems using Hasthi, a ro- bust, scalable, and distributed

Plale, Beth

185

DOE ZERH Webinar: Quality Management Systems for ZERH  

Broader source: Energy.gov [DOE]

Description:The session will provide background and guidance for how Zero Energy Ready Home builders can integrate a quality management program in their business. The focus will be on facilitating...

186

Seamless Energy Management Systems Part I: Assessment of Energy  

E-Print Network [OSTI]

Seamless Energy Management Systems Part I: Assessment of Energy Management Systems and Key to Engineer the Future Electric Energy System #12;#12;Seamless Energy Management Systems Part I: Assessment of Energy Management Systems and Key Technological Requirements Final Project Report Project Faculty Team

187

BATTLEFIELD NETWORK APPLICATIONS OF THE SHAMAN MANAGEMENT SYSTEM  

E-Print Network [OSTI]

BATTLEFIELD NETWORK APPLICATIONS OF THE SHAMAN MANAGEMENT SYSTEM Adarshpal S. Sethi Dong Zhu Vasil Architecture for MANagement). This management system developed at the Network Management Laboratory framework to facili- tate the management of distributed systems [1], [2], [3], [4]. This architecture allows

Sethi, Adarshpal

188

Project Information Form Project Title Managing Roadway Systems to Reduce GHG Emissions and Improve  

E-Print Network [OSTI]

or organization) $25,217 Total Project Cost $25,217 Agency ID or Contract Number DTRT13-G-UTC29 Start and EndProject Information Form Project Title Managing Roadway Systems to Reduce GHG Emissions and Improve Dates 4/1/14 ­ 3/30/15 Brief Description of Research Project There have been a variety of traffic

California at Davis, University of

189

University Budget System Reports Training Guide Prepared by Budget Management and Fiscal Services  

E-Print Network [OSTI]

1 University Budget System Reports Training Guide Prepared by Budget Management and Fiscal Services 345 Strong Hall * 785-864-3136 http://www.budget.ku.edu/ budgetoffice@ku.edu Training Guide Last Updated: November 2010 Contents: I. Description of UBUD II. Budgets, Funds, Appropriations, Cost Centers

190

Quality Management and Job Quality: How the ISO 9001 Standard forQuality Management Systems Affects Employees and Employers  

E-Print Network [OSTI]

of IS0 9000 quality management systems on manufacturing.Standard for Quality Management Systems Affects Employeeshow the ISO 9001 Quality Management System standard affects

Levine, David I.; Toffel, Michael W.

2008-01-01T23:59:59.000Z

191

Development of an Integrated Distribution Management System  

SciTech Connect (OSTI)

This final report details the components, functionality, costs, schedule and benefits of developing an Integrated Distribution Management System (IDMS) for power distribution system operation. The Distribution Automation (DA) and Supervisory Control and Data Acquisition (SCADA) systems used by electric power companies to manage the distribution of electric power to retail energy consumers are vital components of the Nation’s critical infrastructure. Providing electricity is an essential public service and a disruption in that service, if not quickly restored, could threaten the public safety and the Nation’s economic security. Our Nation’s economic prosperity and quality of life have long depended on the essential services that utilities provide; therefore, it is necessary to ensure that electric utilities are able to conduct their operations safely and efficiently. A fully integrated technology of applications is needed to link various remote sensing, communications and control devices with other information tools that help guide Power Distribution Operations personnel. A fully implemented IDMS will provide this, a seamlessly integrated set of applications to raise electric system operating intelligence. IDMS will enhance DA and SCADA through integration of applications such as Geographic Information Systems, Outage Management Systems, Switching Management and Analysis, Operator Training Simulator, and other Advanced Applications, including unbalanced load flow and fault isolation/service restoration. These apps are capable of utilizing and obtaining information from appropriately installed DER, and by integrating disparate systems, the Distribution Operators will benefit from advanced capabilities when analyzing, controlling and operating the electric system.

Schatz, Joe E.

2010-10-20T23:59:59.000Z

192

Efficient Management of Idleness in Storage Systems  

E-Print Network [OSTI]

-off between the performance of fore- ground and background tasks. As a result, the storage system is better4 Efficient Management of Idleness in Storage Systems NINGFANG MI College of William and Mary ALMA of storage sys- tems are scheduled with low priority and served during idle times. Under such conditions

Smirni, Evgenia

193

Sanitary Sewer System Management Plan  

E-Print Network [OSTI]

Contract Number DE- AC02-05CH11231 #12;#12;LBNL SSMP TABLE OF CONTENTS SSMP Section Tab / Page # Section 0 0-1: LBNL CIWQS Sewer System Questionnaire Attachment 0-2: LBNL Facility Sanitary Sewer Collection System Overview Map Section i: Goals None Section ii: Organization Attachment ii-1: LBNL Notice of Intent

194

Systems, Inc. Manufacturing Program Manager  

E-Print Network [OSTI]

70819 #12;Advanced Energy Systems, Inc. Outline ·Introduction ·Accomplishments Phase I ·Technical Approach - Second Year ·Manufacturing Schedule Assessment -Top Level Phase II #12;Advanced Energy Systems Design and FEA of 5 cell RF Cavity, He Vessel, Power Coupler, & Cryostat -Interfaces to external piping

195

Fuel Cell Systems Air Management  

E-Print Network [OSTI]

Targets Compressor/Expander for Transportation Fuel Cell System 400--$Cost 10-1510-155Turndown Ratio 15 compressor/expander units for direct hydrogen systems. · Need exists for compressor/ expander motor unit hydrogen 500020001000HoursDurability 45125325$/kWCost 325250140W/LPower density Operating on Tier 2

196

Delivering Document Management Systems Through the ASP Model  

E-Print Network [OSTI]

Delivering Document Management Systems Through the ASP Model Borko Furht, Florida Atlantic, Boca Raton, Florida Introduction Electronic Document Management Systems (DMS) are commercial off and short records, such as name, address, account number, and social security number. Document management

Furht, Borko

197

Cold Vacuum Drying facility civil structural system design description (SYS 06)  

SciTech Connect (OSTI)

This document describes the Cold Vacuum Drying (CVD) Facility civil - structural system. This system consists of the facility structure, including the administrative and process areas. The system's primary purpose is to provide for a facility to house the CVD process and personnel and to provide a tertiary level of containment. The document provides a description of the facility and demonstrates how the design meets the various requirements imposed by the safety analysis report and the design requirements document.

PITKOFF, C.C.

1999-07-06T23:59:59.000Z

198

Strategic Planning System for Exotic Game Management  

E-Print Network [OSTI]

STRATEGIC PLANNING SYSTEM FOR EXOTIC GAME MANAGEMENT A Thesis by JEANNE MARIE PETROFES LUBBERING Submitted to the Office of Graduate Studies of Texas ASM University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE December 1988 Major Subject: Range Science STRATEGIC PLANNING FOR EXOTIC GAME MANAGEMENT A Thesis by JEANNE MARIE PETROFES LUBBERING Approved as to style and content by: J ry W. uth (Ch ir of Committee) Steve Archer (Member) Duane C...

Lubbering, Jeanne Marie Petrofes

1988-01-01T23:59:59.000Z

199

Vol 2, Integrated Safety Management System Guide  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Department of Energy (DOE) Integrated Safety Management System (ISMS) Guide is approved for use by the Office of Environment, Safety and Health (EH) and is available for use by all DOE components and their contractors. This Guide is a consensus document coordinated by EH and prepared under the direction of the DOE Safety Management Implementation Team (SMIT). Canceled by DOE G 450.4-1B.

1999-05-27T23:59:59.000Z

200

Database Management Systems 3ed, R. Ramakrishnan and J. Gehrke 1 Database Management Systems  

E-Print Network [OSTI]

What Is a DBMS? A database is a collection of data. Models real-world enterprise, e.g. university System (DBMS) is a software package designed to store and manage databases. #12;Database Management Systems 3ed, R. Ramakrishnan and J. Gehrke 3 Why we need DBMS Huge amount of data is available. Users need

Li, Yanjun "Lisa"

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Recommendation 171: Commendation for Waste Information Management System  

Broader source: Energy.gov [DOE]

The ORSSAB commends DOE and Florida International University for development of the Waste Information Management System.

202

RIS-M-2271 DESCRIPTION OF A SIMULATION SYSTEM DYSIM FOR CONTINUOUS  

E-Print Network [OSTI]

;FORTRAN; NUCLEAR POWER PLANTS; STEADY-STATE CONDITIONS; TRANSIENTS UDC 621.039.5 : 681.3.06 January 1981 Risø for simulation of nuclear reactors and plant com- ponents. Several minor modifications have been done to adaptRIS�-M-2271 DESCRIPTION OF A SIMULATION SYSTEM DYSIM FOR CONTINUOUS DYNAMIC PROCESSES P. la Cour

203

The Information System The ideal system manager has the curiosity of a cat,  

E-Print Network [OSTI]

Chapter 2 The Information System Manager #12;The ideal system manager has the curiosity of a cat manage? As a property level information system manager, you may manage the following 3 types of computer #12;Who should manage the information system? O Patience and good communication skills O Hands

204

Analytical description of the quantum-mesoscopic-classical transition in systems with quasidiscrete environments  

SciTech Connect (OSTI)

We investigate the dynamic properties of inhomogeneous nanomaterials, which appear in analytical descriptions typically as a series of {delta} functions with corresponding Gibbs weights. We focus on observables relevant for transport theories of Josephson junction arrays and granular systems near the superconductor-insulator transition. Furthermore, our description applies to the theory of tunnel junctions exchanging energy with a 'bath,' the latter having a discrete spectrum. Using the matrix {Theta}-function formalism, we find an analytical expression for the transport characteristics capturing the complete temperature-driven transition from the quantum to the classical regime.

Chtchelkatchev, N. M.; Glatz, A. (Materials Science Division); (Russian Acad. Sci.); (Moscow Inst. Phys. Tech.)

2012-01-01T23:59:59.000Z

205

Integrated Baseline System (IBS). Version 1.03, System Management Guide  

SciTech Connect (OSTI)

This IBS System Management Guide explains how to install or upgrade the Integrated Baseline System (IBS) software package. The IBS is an emergency management planning and analysis tool that was developed under the direction of the Federal Emergency Management Agency (FEMA). This guide includes detailed instructions for installing the IBS software package on a Digital Equipment Corporation (DEC) VAX computer from the IBS distribution tapes. The installation instructions include procedures for both first-time installations and upgrades to existing IBS installations. To ensure that the system manager has the background necessary for successful installation of the IBS package, this guide also includes information on IBS computer requirements, software organization, and the generation of IBS distribution tapes. When special utility programs are used during IBS installation and setups, this guide refers you to the IBS Utilities Guide for specific instructions. This guide also refers you to the IBS Data Management Guide for detailed descriptions of some IBS data files and structures. Any special requirements for installation are not documented here but should be included in a set of installation notes that come with the distribution tapes.

Williams, J.R. [Pacific Northwest Lab., Richland, WA (United States); Bailey, S. [Innovative Emergency Management, Inc., Baton Rouge, LA (United States); Bower, J.C. [Bower Software Services, Kennewick, Washington (United States)

1993-01-01T23:59:59.000Z

206

Cold Vacuum Drying Facility Crane and Hoist System Design Description (SYS 14)  

SciTech Connect (OSTI)

This system design description (SDD) is for the Cold Vacuum Drying (CVD) Facility overhead crane and hoist system. The overhead crane and hoist system is a general service system. It is located in the process bays of the CVD Facility, supports the processes required to drain the water and dry the spent nuclear fuel (SNF) contained in the multi-canister overpacks (MCOs) after they have been removed from the K-Basins. The location of the system in the process bay is shown.

TRAN, Y.S.

2000-06-07T23:59:59.000Z

207

Airborne Multisensor Pod System (AMPS) data management overview  

SciTech Connect (OSTI)

An overview of the Data Management Plan for the Airborne Multisensor Pod System (AMPS) pro-grain is provided in this document. The Pacific Northwest Laboratory (PNL) has been assigned the responsibility of data management for the program, which includes defining procedures for data management and data quality assessment. Data management is defined as the process of planning, acquiring, organizing, qualifying and disseminating data. The AMPS program was established by the U.S. Department of Energy (DOE), Office of Arms Control and Non-Proliferation (DOE/AN) and is integrated into the overall DOE AN-10.1 technology development program. Sensors used for collecting the data were developed under the on-site inspection, effluence analysis, and standoff sensor program, the AMPS program interacts with other technology programs of DOE/NN-20. This research will be conducted by both government and private industry. AMPS is a research and development program, and it is not intended for operational deployment, although the sensors and techniques developed could be used in follow-on operational systems. For a complete description of the AMPS program, see {open_quotes}Airborne Multisensor Pod System (AMPS) Program Plan{close_quotes}. The primary purpose of the AMPS is to collect high-quality multisensor data to be used in data fusion research to reduce interpretation problems associated with data overload and to derive better information than can be derived from any single sensor. To collect the data for the program, three wing-mounted pods containing instruments with sensors for collecting data will be flight certified on a U.S. Navy RP-3A aircraft. Secondary objectives of the AMPS program are sensor development and technology demonstration. Pod system integrators and instrument developers will be interested in the performance of their deployed sensors and their supporting data acquisition equipment.

Wiberg, J.D.; Blough, D.K.; Daugherty, W.R.; Hucks, J.A.; Gerhardstein, L.H.; Meitzler, W.D.; Melton, R.B.; Shoemaker, S.V.

1994-09-01T23:59:59.000Z

208

Spent nuclear fuel project cold vacuum drying facility vacuum and purge system design description  

SciTech Connect (OSTI)

This document provides the System Design Description (SDD) for the Cold Vacuum Drying Facility (CVDF) Vacuum and Purge System (VPS) . The SDD was developed in conjunction with HNF-SD-SNF-SAR-O02, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998), The HNF-SD-SNF-DRD-002, 1998, Cold Vacuum Drying Facility Design Requirements, and the CVDF Design Summary Report. The SDD contains general descriptions of the VPS equipment, the system functions, requirements and interfaces. The SDD provides references for design and fabrication details, operation sequences and maintenance. This SDD has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

IRWIN, J.J.

1998-11-30T23:59:59.000Z

209

Spent nuclear fuel project cold vacuum drying facility process water conditioning system design description  

SciTech Connect (OSTI)

This document provides the System Design Description (SDD) for the Cold Vacuum Drying Facility (CVDF) Process Water Conditioning (PWC) System. The SDD was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998), the HNF-SD-SNF-DRD-O02, 1998, Cold Vacuum Drying Facility Design Requirements, and the CVDF Design Summary Report. The SDD contains general descriptions of the PWC equipment, the system functions, requirements and interfaces. The SDD provides references for design and fabrication details, operation sequences and maintenance. This SDD has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

IRWIN, J.J.

1998-11-30T23:59:59.000Z

210

Software aspects of energy management systems  

SciTech Connect (OSTI)

This paper is intended to serve the need for an understanding of the role which software plays in energy management systems (EMS), and of the considerations involved in designing, implementing and maintaining such systems. The paper begins with a brief elementary examination of what software is and the types of basic functions it typically performs in EMS applications. Various aspects of EMS software are then explained and discussed, including software architecture, programming language, operating system, data base management, man-machine interface, application software, and communications. In addition to providing a tutorial on the composition and content of EMS software, the paper addresses several related questions, such as the reasons for choosing one programming language over another, the effect of system size on software factors, the extent to which off-the-shelf software components can and should be incorporated in EMS, and the relationship of software to the overall user interface with the systems.

Stinaff, R.D.

1983-06-01T23:59:59.000Z

211

Earned Value Management System RM  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power SystemsResources DOE ZeroThreeEnergyDepartment0:Energy3 - In the MatterEarly Days

212

Implementation Guide for Integrating Pollution Prevention into Environmental Management Systems  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide suggests approaches to integrating pollution prevention into Integrated Safety Management/Environmental Management Systems. Canceled by DOE N 251.82.

2005-05-27T23:59:59.000Z

213

UNIVERSITY OF PITTSBURGH AT GREENSBURG Management -Information Systems  

E-Print Network [OSTI]

UNIVERSITY OF PITTSBURGH AT GREENSBURG Management - Information Systems u n d e r g r a d u a t e p r o g r a m Management - Information Systems 48 credits Bachelor of Science Management - Information Accounting MGMT 1818 Management Science INFSCI 0010 Introduction to Information Systems and Society Area

Sibille, Etienne

214

Verification of Network Management System Configurations David L. Cohrs  

E-Print Network [OSTI]

, with the use of simple, ad hoc tools. However in a large network, managing the net- work management system the amount of sharing and coordination possible in configuring the net- work management system. EachVerification of Network Management System Configurations David L. Cohrs (608) 262-6617 dave

Miller, Barton P.

215

Data Management System of the DIRAC Project  

E-Print Network [OSTI]

The DIRAC Interware provides a development framework and a complete set of components for building distributed computing systems. The DIRAC Data Management System (DMS) offers all the necessary tools to ensure data handling operations for small and large user communities. It supports transparent access to storage resources based on multiple technologies, and is easily expandable. The information on data files and replicas is kept in a File Catalog of which DIRAC offers a powerful and versatile implementation (DFC). Data movement can be performed using third party services including FTS3. Bulk data operations are resilient with respect to failures due to the use of the Request Management System (RMS) that keeps track of ongoing tasks. In this contribution we will present an overview of the DIRAC DMS capabilities and its connection with other DIRAC subsystems such as the Transformation System. The DIRAC DMS is in use by several user communities now. The contribution will present the experience of the LHCb exper...

Haen, Christophe; Tsaregorodtsev, Andrei

2015-01-01T23:59:59.000Z

216

Management and Safety of Transportation Systems  

E-Print Network [OSTI]

Management and Safety of Transportation Systems University Transportation Center for Alabama A N N@eng.ua.edu www.eng.ua.edu Editors: James Cruise, Ph.D. Barbara Moore University Transportation Center for Alabama Transportation Center for Alabama (UTCA). The contents of this Annual Report reflect the views of the editors

Carver, Jeffrey C.

217

WORKLOAD ADAPTATION IN AUTONOMIC DATABASE MANAGEMENT SYSTEMS  

E-Print Network [OSTI]

in Autonomic DBMSs", Proceedings of the 2nd International Workshop on Self-Managing Database Systems (SMDB 2007 to meet its Service Level Objectives (SLOs). It is a challenge to adapt multiple workloads with complex scheduler that performs workload adaptation in a DBMS, as the test bed to prove the effectiveness

218

Agricultural Systems Management UNOFFICIAL DEGREE PLAN  

E-Print Network [OSTI]

Agricultural Systems Management UNOFFICIAL DEGREE PLAN STUDENT'S NAME: Catalog 2011 STUDENT'S ID 310 (2-2) 3 AGSM 301; AGEC 330 STAT 302 (3-0) or MATH 141 Tech. Elective3 3 STAT 303 (3-0) 3 MATH 141

219

PV Integration by Building Energy Management System  

E-Print Network [OSTI]

. However, to validate global control algorithms, a simulator capable of interoperating with energy[kWh]. Econs (k) Total energy consumed by the load [kWh]. E (i, k) Energy consumed by the service i duringPV Integration by Building Energy Management System Rim.Missaoui¹, Ghaith.Warkozek¹, Seddik. Bacha

Boyer, Edmond

220

Policy Management for Networked Systems and Applications  

E-Print Network [OSTI]

Policy Management for Networked Systems and Applications Dakshi Agrawal, Seraphin Calo, James Giles {agrawal,scalo,gilesjam,kangwon,dverma}@us.ibm.com Abstract In this paper, we present a novel policy and administrative domains. The proposed policy middleware provides a standard infrastructure for the creation

Lee, Kang-Won

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Implementing Management Systems-Based Assessments  

SciTech Connect (OSTI)

A management system approach for evaluating environment, safety, health, and quality is in use at Sandia National Laboratories (SNL). Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy under contract DE-AC04-94AL85000. As a multi-program national laboratory, SNL has many diverse operations including research, engineering development and applications, production, and central services supporting all activities and operations. Basic research examples include fusion power generation, nuclear reactor experiments, and investigation of combustion processes. Engineering development examples are design, testing, and prototype developments of micro-mechanical systems for safe'~arding computer systems, air bags for automobiles, satellite systems, design of transportation systems for nuclear materials, and systems for use in medical applications such as diagnostics and surgery. Production operations include manufacture of instrumented detection devices, radioisotopes, and replacement parts for previously produced engineered systems. Support services include facilities engineering, construction, and site management, site security, packaging and transportation of hazardous materials wastes, ES&H functional programs to establish requirements and guidance to comply with federal, state, local, and contractual requirements and work safety. In this diverse environment, unlike more traditional single function business units, an integrated consistent management system is not typical. Instead, each type of diverse activity has its own management system designed and distributed around the operations, personnel, customers, and facilities (e.g., hazards involved, security, regulatory requirements, and locations). Laboratory managers are not likely to have experience in the more traditional hierarchical or command and control structures and thus do not share oversight expectations found in centralized management systems. The resulting corporate management system gives the appearance of an assembly of multiple, nearly independent operating units. The executive management system maintains these separate units, encouraging autonomy and creativity by establishing a minimum of requirements and procedures. In any organization, senior management has a responsibility to ensure that all operating units are meeting requirements. Part of this responsibility is fulfilled by conducting oversight or assurance activities, to determine the effectiveness of established systems in meeting requirements and performance expectations. Internal independent assessment is one of these assurance activities. Independent appraisals are combined with external audits and appraisals, self-assessments, peer reviews, project reviews, and other internal and external audits (e.g., financial, contractual) for a more complete assurance view. At SNL, internal independent appraisals are performed by the Audit Center, which reports directly to the Executive Vice President. ES&H independent appraisals are the responsibility of the ES&H and Quality Assessments Department, with a staff complement of eight. With our organization's charter to perform internal, independent appraisals, we set out to develop an approach and associated tools, which would be useful in the overall SNL environment and within our resource limitations.

Campisi, John A.; Reese, Robert T.

1999-05-03T23:59:59.000Z

222

Survey and Taxonomy of Grid Resource Management Systems Chaitanya Kandagatla  

E-Print Network [OSTI]

Survey and Taxonomy of Grid Resource Management Systems Chaitanya Kandagatla University of Texas, Austin Abstract The resource management system is the central component of a grid system. This paper management architectures of popular contemporary grid systems. 1. Introduction Grid systems are inter

Browne, James C.

223

Sustainable System for Residual Hazards Management  

SciTech Connect (OSTI)

Hazardous, radioactive and other toxic substances have routinely been generated and subsequently disposed of in the shallow subsurface throughout the world. Many of today’s waste management techniques do not eliminate the problem, but rather only concentrate or contain the hazardous contaminants. Residual hazards result from the presence of hazardous and/or contaminated material that remains on-site following active operations or the completion of remedial actions. Residual hazards pose continued risk to humans and the environment and represent a significant and chronic problem that require continuous longterm management (i.e. >1000 years). To protect human health and safeguard the natural environment, a sustainable system is required for the proper management of residual hazards. A sustainable system for the management of residual hazards will require the integration of engineered, institutional and land-use controls to isolate residual contaminants and thus minimize the associated hazards. Engineered controls are physical modifications to the natural setting and ecosystem, including the site, facility, and/or the residual materials themselves, in order to reduce or eliminate the potential for exposure to contaminants of concern (COCs). Institutional controls are processes, instruments, and mechanisms designed to influence human behavior and activity. System failure can involve hazardous material escaping from the confinement because of system degradation (i.e., chronic or acute degradation) or by externalintrusion of the biosphere into the contaminated material because of the loss of institutional control. An ongoing analysis of contemporary and historic sites suggests that the significance of the loss of institutional controls is a critical pathway because decisions made during the operations/remedial action phase, as well as decisions made throughout the residual hazards management period, are key to the longterm success of the prescribed system. In fact, given that society has become more reliant on and confident of engineered controls, there may be a growing tendency to be even less concerned with institutional controls.

Kevin M. Kostelnik; James H. Clarke; Jerry L. Harbour

2004-06-01T23:59:59.000Z

224

Optimal management of batteries in electric systems  

DOE Patents [OSTI]

An electric system including at least a pair of battery strings and an AC source minimizes the use and maximizes the efficiency of the AC source by using the AC source only to charge all battery strings at the same time. Then one or more battery strings is used to power the load while management, such as application of a finish charge, is provided to one battery string. After another charge cycle, the roles of the battery strings are reversed so that each battery string receives regular management.

Atcitty, Stanley (Albuquerque, NM); Butler, Paul C. (Albuquerque, NM); Corey, Garth P. (Albuquerque, NM); Symons, Philip C. (Morgan Hill, CA)

2002-01-01T23:59:59.000Z

225

HAMMER COURSEWARE MANAGEMENT SYSTEM (CMS) SYSTEM DEVELOPMENT & IMPLEMENTATION  

SciTech Connect (OSTI)

HAMMER Courseware Management System (HAMMERCMS) is the official name of the system Fluor Hanford, Inc., uses to facilitate development of, deliver, and track training presented in some electronic form (mainly, web-based training) to Hanford Site employees, subcontractors, and vendors.

GARDNER, P.R.

2006-04-28T23:59:59.000Z

226

System integration test plan for HANDI 2000 business management system  

SciTech Connect (OSTI)

This document presents the system integration test plan for the Commercial-Off-The-Shelf, PassPort and PeopleSoft software, and custom software created to work with the COTS products. The PP software is an integrated application for AP, Contract Management, Inventory Management, Purchasing and Material Safety Data Sheet. The PS software is an integrated application for Project Costing, General Ledger, Human Resources/Training, Payroll, and Base Benefits.

Wilson, D.

1998-08-24T23:59:59.000Z

227

Systems engineering product description report for the Hanford Cleanup Mission: First issue  

SciTech Connect (OSTI)

This document describes the upper level physical and administrative (nonphysical) products that, when delivered, complete the Hanford Cleanup Mission. Development of product descriptions is a continuation of the Sitewide Systems Engineering work described in the Sitewide functional analysis, the architecture synthesis, and is consistent with guidance contained in the mission plan. This document provides a bridge between all three documents and the products required to complete the mission of cleaning up the Hanford Site.

Holmes, J.J.; Bailey, K.B. [Westinghouse Hanford Co., Richland, WA (United States); Collings, J.L.; Hubbard, A.B.; Niepke, T.M. [Science Applications International Corp. (United States)

1994-06-01T23:59:59.000Z

228

Seamless Energy Management Systems Part II: Development of Prototype  

E-Print Network [OSTI]

Seamless Energy Management Systems Part II: Development of Prototype Core Elements Final Project System #12;#12;Seamless Energy Management Systems Part II: Development of Prototype Core Elements Final Center (PSERC) research project entitled "Seamless Energy Management Systems" (S-53G for 2013

229

Used Fuel Management System Interface Analyses - 13578  

SciTech Connect (OSTI)

Preliminary system-level analyses of the interfaces between at-reactor used fuel management, consolidated storage facilities, and disposal facilities, along with the development of supporting logistics simulation tools, have been initiated to provide the U.S. Department of Energy (DOE) and other stakeholders with information regarding the various alternatives for managing used nuclear fuel (UNF) generated by the current fleet of light water reactors operating in the United States. An important UNF management system interface consideration is the need for ultimate disposal of UNF assemblies contained in waste packages that are sized to be compatible with different geologic media. Thermal analyses indicate that waste package sizes for the geologic media under consideration by the Used Fuel Disposition Campaign may be significantly smaller than the canisters being used for on-site dry storage by the nuclear utilities. Therefore, at some point along the UNF disposition pathway, there could be a need to repackage fuel assemblies already loaded and being loaded into the dry storage canisters currently in use. The implications of where and when the packaging or repackaging of commercial UNF will occur are key questions being addressed in this evaluation. The analysis demonstrated that thermal considerations will have a major impact on the operation of the system and that acceptance priority, rates, and facility start dates have significant system implications. (authors)

Howard, Robert; Busch, Ingrid [Oak Ridge National Laboratory, P.O. Box 2008, Bldg. 5700, MS-6170, Oak Ridge, TN 37831 (United States)] [Oak Ridge National Laboratory, P.O. Box 2008, Bldg. 5700, MS-6170, Oak Ridge, TN 37831 (United States); Nutt, Mark; Morris, Edgar; Puig, Francesc [Argonne National Laboratory (United States)] [Argonne National Laboratory (United States); Carter, Joe; Delley, Alexcia; Rodwell, Phillip [Savannah River National Laboratory (United States)] [Savannah River National Laboratory (United States); Hardin, Ernest; Kalinina, Elena [Sandia National Laboratories (United States)] [Sandia National Laboratories (United States); Clark, Robert [U.S. Department of Energy (United States)] [U.S. Department of Energy (United States); Cotton, Thomas [Complex Systems Group (United States)] [Complex Systems Group (United States)

2013-07-01T23:59:59.000Z

230

The structure of energy management systems  

SciTech Connect (OSTI)

Energy management systems (EMS) which serve a variety of building functions are a complex combination of hardware and software. The design of the system is a trade-off between different characteristics including functions performed, number of connected points, cost, compatibility with other systems, reliability and flexibility. The functions performed by the EMS vary significantly with respect to complexity, interaction and rate of response required. The majority of functions interact either directly or indirectly with each other. The data required to support EMS functions can be classed as status, control, qualifying and informational. The amount of data required is extensive and must be brought together in many combinations to achieve the desired performance. The transfer of data is carried out by a communication system which connects the components of the EMS. The communication requirements, in addition to functional performance, are influenced by the application flexibility desired and the level of distribution of the system. Three general distribution levels are centralized, status and control decentralized, and functionally decentralized. The ability of the EMS of one manufacturer to interact effectively with EMS components or complete systems of other manufacturers is limited by the respective selections for data structures, communication methods and level of distribution. In general, the unique selection of characteristics chosen by each manufacturer precludes the integration of energy management system components of different manufacturers unless details of implementation are known.

Miller, D.E.

1983-06-01T23:59:59.000Z

231

Electricity Demand and Energy Consumption Management System  

E-Print Network [OSTI]

This project describes the electricity demand and energy consumption management system and its application to the Smelter Plant of Southern Peru. It is composted of an hourly demand-forecasting module and of a simulation component for a plant electrical system. The first module was done using dynamic neural networks, with backpropagation training algorithm; it is used to predict the electric power demanded every hour, with an error percentage below of 1%. This information allows management the peak demand before this happen, distributing the raise of electric load to other hours or improving those equipments that increase the demand. The simulation module is based in advanced estimation techniques, such as: parametric estimation, neural network modeling, statistic regression and previously developed models, which simulates the electric behavior of the smelter plant. These modules allow the proper planning because it allows knowing the behavior of the hourly demand and the consumption patterns of the plant, in...

Sarmiento, Juan Ojeda

2008-01-01T23:59:59.000Z

232

System and method for advanced power management  

DOE Patents [OSTI]

A power management system is provided that includes a power supply means comprising a plurality of power supply strings, a testing means operably connected to said plurality of power supply strings for evaluating performance characteristics of said plurality of power supply strings, and a control means for monitoring power requirements and comprising a switching means for controlling switching of said plurality of power supply strings to said testing means.

Atcitty, Stanley (Albuquerque, NM); Symons, Philip C. (Surprise, AZ); Butler, Paul C. (Albuquerque, NM); Corey, Garth P. (Albuquerque, NM)

2009-07-28T23:59:59.000Z

233

Agricultural Systems Management UNOFFICIAL DEGREE PLAN  

E-Print Network [OSTI]

Agricultural Systems Management UNOFFICIAL DEGREE PLAN STUDENT'S NAME: Catalog 2013 STUDENT'S ID AGSM 315 (2-2) 3 PHYS 201 AGEC 340 (3-0) 3 U3/U4 AGSM 325 (2-2) 3 STAT 302 (3-0) or MATH 141 Tech. Elective3 3 STAT 303 (3-0) 3 MATH 141 15 Am. Hist. Elect1 (3-0) 3 15 SENIOR AGEC 315 (3-0) or U3/U4 AGSM

Behmer, Spencer T.

234

V-174: RSA Authentication Manager Writes Operating System, SNMP...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

4: RSA Authentication Manager Writes Operating System, SNMP, and HTTP Plug-in Proxy Passwords in Clear Text to Log Files V-174: RSA Authentication Manager Writes Operating System,...

235

Survey Report: Improving Integration of Program Management and Systems Engineering  

E-Print Network [OSTI]

For many years, a cultural barrier has existed between practitioners of systems engineering and of program management.  Some systems engineers and program managers have developed the mindset that their work activities ar ...

Conforto, Edivandro

236

Managing Aging Effects on Dry Cask Storage Systems for Extended...  

Office of Environmental Management (EM)

Managing Aging Effects on Dry Cask Storage Systems for Extended Long Term Storage and Transportation of Used Fuel Rev0 Managing Aging Effects on Dry Cask Storage Systems for...

237

Cold Vacuum Drying (CVD) Facility General Service Helium System Design Description  

SciTech Connect (OSTI)

The purpose of this System Design Description (SDD) is to describe the characteristics of the Cold Vacuum Drying (CVD) Facility general service helium system. The general service helium system is a general service facility process support system, but does include safety-class structures, systems and components (SSCs) providing protection to the offsite public. The general service helium system also performs safety-significant functions that provide protection to onsite workers. The general helium system essential function is to provide helium (He) to support process functions during all phases of facility operations. General service helium is used to purge the cask and the MCO in order to maintain their internal atmospheres below hydrogen flammability concentrations. The general service helium system also supplies helium to purge the process water conditioning (PWC) lines and components and the vacuum purge system (VPS) vacuum pump. The general service helium system, if available following an Safety Class Instrument and Control System (SCIC) Isolation and Purge (IS0 and PURGE) Trip, can provide an alternate general service helium system source to supply the Safety-Class Helium (SCHe) System.

SHAPLEY, B.J.

2000-04-20T23:59:59.000Z

238

Track 7: Environmental Protection, Environmental Management System (EMS), "Greening Initiatives"  

Broader source: Energy.gov [DOE]

ISM Workshop Presentations Knoxville Convention Center, Knoxville, TN August 2009 Track 7: Environmental Protection, Environmental Management System (EMS), "Greening Initiatives"

239

Application and Management of Commonality within NASA Systems  

E-Print Network [OSTI]

Application and Management of Commonality within NASA Systems by Richard A. Rhodes B.S. Mechanical Students #12;2 #12;3 Application and Management of Commonality within NASA Systems by Richard A. Rhodes within NASA systems and to identify the best practices and key challenges for the management

de Weck, Olivier L.

240

A Spatial Planning and Analysis System for Wildland Fire Management  

E-Print Network [OSTI]

STARFIRE 11/29/2011 A Spatial Planning and Analysis System for Wildland Fire Management Welcome is an advanced and powerful spatial fire management planning and analysis system which is designed to provide visual and analytic support for fire management planning, decisions and communication. The system

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

IBM Systems Director Active Energy Manager Installation and User's Guide  

E-Print Network [OSTI]

IBM Systems Director Active Energy Manager Installation and User's Guide Version 4.3 #12;#12;IBM Systems Director Active Energy Manager Installation and User's Guide Version 4.3 #12;ii IBM Systems Director Active Energy Manager: Installation and User's Guide #12;About this book This book provides

242

Managing Uncertainty in Operational Control of Water Distribution Systems  

E-Print Network [OSTI]

Managing Uncertainty in Operational Control of Water Distribution Systems A. Bargiela Department. There are system management decisions concerning the regulatory measures such as water pricing principles, effluent in water distribution systems con- cern reservoir(s) management with associated pump scheduling

Bargiela, Andrzej

243

CERTIFICATE OF APPROVAL Thisisto certifythat the Quality Management System of  

E-Print Network [OSTI]

CERTIFICATE OF APPROVAL Thisisto certifythat the Quality Management System of: Southwest Research been approved by Lloyd's Register Quality Assurance to the following Quality Management System Standards: ISO 9001 :2008 ANSIIISO/ ASQ Q9001-2008 The Quality Management System is applicable to: Research

Chapman, Clark R.

244

Environmental management system objectives & targets results summary :  

SciTech Connect (OSTI)

Sandia National Laboratories/New Mexicos (SNL/NM) Environmental Management System is the integrated approach for members of the workforce to identify and manage environmental risks. Each Fiscal Year (FY) SNL/NM performs an analysis to identify environmental aspects, and the environmental programs associated with them are charged with the task of routinely monitoring and measuring the objectives and targets that are established to mitigate potential impacts of SNL/NMs operations on the environment. An annual summary of the results achieved towards meeting established Sandia Corporation and SNL/NM Site-specific objectives and targets provides a connection to, and rational for, annually revised environmental aspects. The purpose of this document is to summarize the results achieved and documented in FY2013.

Vetter, Douglas Walter

2014-04-01T23:59:59.000Z

245

Cold Vacuum Dryer (CVD) Facility Fire Protection System Design Description (SYS 24)  

SciTech Connect (OSTI)

This system design description (SDD) addresses the Cold Vacuum Drying (CVD) Facility fire protection system (FPS). The primary features of the FPS for the CVD are a fire alarm and detection system, automatic sprinklers, and fire hydrants. The FPS also includes fire extinguishers located throughout the facility and fire hydrants to assist in manual firefighting efforts. In addition, a fire barrier separates the operations support (administrative) area from the process bays and process bay support areas. Administrative controls to limit combustible materials have been established and are a part of the overall fire protection program. The FPS is augmented by assistance from the Hanford Fire Department (HED) and by interface systems including service water, electrical power, drains, instrumentation and controls. This SDD, when used in conjunction with the other elements of the definitive design package, provides a complete picture of the FPS for the CVD Facility.

SINGH, G.

2000-10-17T23:59:59.000Z

246

asset management system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

techniques for early error detection and fast recovery in a database management system (DBMS California at Irvine, University of 405 Division of Information Information Systems...

247

asthma management system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

techniques for early error detection and fast recovery in a database management system (DBMS California at Irvine, University of 302 Division of Information Information Systems...

248

V-132: IBM Tivoli System Automation Application Manager Multiple...  

Broader source: Energy.gov (indexed) [DOE]

IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation...

249

Business Manangement System(BMS), RL-2008/Project Hanford Management...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Business Manangement System(BMS), RL-2008Project Hanford Management Contract PHMC (Flour), Office of the Chief Information Officer Business Manangement System(BMS), RL-2008...

250

"Beyond HTML: Developing and re-imagining library web guides in a content management system  

E-Print Network [OSTI]

with a content management system. ” Texas Library Journal,Web content management systems: evolution, lifecycle andIN A CONTENT MANAGEMENT SYSTEM Doug Goans (dgoans@gsu.edu)

Goans, Doug; Leach, Guy; Vogel, Teri M.

2006-01-01T23:59:59.000Z

251

Aurora: A Data Stream Management System , D. Carney  

E-Print Network [OSTI]

Aurora: A Data Stream Management System D. Abadi , D. Carney§ , U. Cetintemel§ , M. Cherniack , C.I.T. Abstract The Aurora system [1] is an experimental data stream management system with a fully functional to demonstrate the Aurora system with its development environment and runtime system, with several example

Cherniack, Mitch

252

System Demand-Side Management: Regional results  

SciTech Connect (OSTI)

To improve the Bonneville Power Administration's (Bonneville's) ability to analyze the value and impacts of demand-side programs, Pacific Northwest Laboratory (PNL) developed and implemented the System Demand-Side Management (SDSM) model, a microcomputer-based model of the Pacific Northwest Public Power system. This document outlines the development and application of the SDSM model, which is an hourly model. Hourly analysis makes it possible to examine the change in marginal revenues and marginal costs that accrue from the movement of energy consumption from daytime to nighttime. It also allows a more insightful analysis of programs such as water heater control in the context of hydroelectric-based generation system. 7 refs., 10 figs., 10 tabs.

Englin, J.E.; Sands, R.D.; De Steese, J.G.; Marsh, S.J.

1990-05-01T23:59:59.000Z

253

Faculty of Medicine Health Research Data and Systems Management (HRDSM)  

E-Print Network [OSTI]

Faculty of Medicine Health Research Data and Systems Management (HRDSM) Core Facility Governance technical manager who reports to the Associate Dean, Research. The HRDSM Core Facility is supported by a Users Management Committee that meets at least four times annually. Users Management Committee: Terms

Brownstone, Rob

254

Civilian Radioactive Waste Management System Requirements Document  

SciTech Connect (OSTI)

The CRD addresses the requirements of Department of Energy (DOE) Order 413.3-Change 1, ''Program and Project Management for the Acquisition of Capital Assets'', by providing the Secretarial Acquisition Executive (Level 0) scope baseline and the Program-level (Level 1) technical baseline. The Secretarial Acquisition Executive approves the Office of Civilian Radioactive Waste Management's (OCRWM) critical decisions and changes against the Level 0 baseline; and in turn, the OCRWM Director approves all changes against the Level 1 baseline. This baseline establishes the top-level technical scope of the CRMWS and its three system elements, as described in section 1.3.2. The organizations responsible for design, development, and operation of system elements described in this document must therefore prepare subordinate project-level documents that are consistent with the CRD. Changes to requirements will be managed in accordance with established change and configuration control procedures. The CRD establishes requirements for the design, development, and operation of the CRWMS. It specifically addresses the top-level governing laws and regulations (e.g., ''Nuclear Waste Policy Act'' (NWPA), 10 Code of Federal Regulations (CFR) Part 63, 10 CFR Part 71, etc.) along with specific policy, performance requirements, interface requirements, and system architecture. The CRD shall be used as a vehicle to incorporate specific changes in technical scope or performance requirements that may have significant program implications. Such may include changes to the program mission, changes to operational capability, and high visibility stakeholder issues. The CRD uses a systems approach to: (1) identify key functions that the CRWMS must perform, (2) allocate top-level requirements derived from statutory, regulatory, and programmatic sources, and (3) define the basic elements of the system architecture and operational concept. Project-level documents address CRD requirements by further defining system element functions, decomposing requirements into significantly greater detail, and developing designs of system components, facilities, and equipment. The CRD addresses the identification and control of functional, physical, and operational boundaries between and within CRWMS elements. The CRD establishes requirements regarding key interfaces between the CRWMS and elements external to the CRWMS. Project elements define interfaces between CRWMS program elements. The Program has developed a change management process consistent with DOE Order 413.3-Change 1. Changes to the Secretarial Acquisition Executive and Program-level baselines must be approved by a Program Baseline Change Control Board. Specific thresholds have been established for identifying technical, cost, and schedule changes that require approval. The CRWMS continually evaluates system design and operational concepts to optimize performance and/or cost. The Program has developed systems analysis tools to assess potential enhancements to the physical system and to determine the impacts from cost saving initiatives, scientific and technological improvements, and engineering developments. The results of systems analyses, if appropriate, are factored into revisions to the CRD as revised Programmatic Requirements.

C.A. Kouts

2006-05-10T23:59:59.000Z

255

HYLIFE-II tritium management system  

SciTech Connect (OSTI)

The tritium management system performs seven functions: (1) tritium gas removal from the blast chamber, (2) tritium removal from the Flibe, (3) tritium removal from helium sweep gas, (4) tritium removal from room air, (5) hydrogen isotope separation, (6) release of non-hazardous gases through the stack, (7) fixation and disposal of hazardous effluents. About 2 TBq/s (5 MCi/day) of tritium is bred in the Flibe (Li{sub 2}BeF{sub 4}) molten salt coolant by neutron absorption. Tritium removal is accomplished by a two-stage vacuum disengager in each of three steam generator loops. Each stage consists of a spray of 0.4 mm diameter, hot Flibe droplets into a vacuum chamber 4 m in diameter and 7 m tall. As droplets fall downward into the vacuum, most of the tritium diffuses out and is pumped away. A fraction {Phi}{approx}10{sup {minus}5} of the tritium remains in the Flibe as it leaves the second stage of the vacuum disengager, and about 24% of the remaining tritium penetrates through the steam generator tubes, per pass, so the net leakage into the steam system is about 4.7 MBq/s (11 Ci/day). The required Flibe pumping power for the vacuum disengager system is 6.6 MW. With Flibe primary coolant and a vacuum disengager, an intermediate coolant loop is not needed to prevent tritium from leaking into the steam system. An experiment is needed to demonstrate vacuum disengager operation with Flibe. A secondary containment shell with helium sweep gas captures the tritium permeating out of the Flibe ducts, limiting leaks there to about 1 Ci/day. The tritium inventory in the reactor is about 190 g, residing mostly in the large Flibe recirculation duct walls. The total cost of the tritium management system is 92 M$, of which the vacuum disengagers cost = 56%, the blast chamber vacuum system = 15%, the cryogenic plant = 9%, the emergency air cleanup and waste treatment systems each = 6%, the protium removal system = 3%, and the fuel storage system and inert gas system each = 2%.

Longhurst, G.R.; Dolan, T.J.

1993-06-01T23:59:59.000Z

256

Major: Ecological Systems Design, Air Quality Control and Waste Management  

E-Print Network [OSTI]

1 Major: Ecological Systems Design, Air Quality Control and Waste Management · Being able to solve control technologies · Knowledge in waste management and technologies Module 1: Ecological Systems Design quality control and biogas Waste management and air quality control Examples for combination of Modules

Giger, Christine

257

Meteorological Monitoring on bikini atoll: system description and data summary (May 2000 - April 2001)  

SciTech Connect (OSTI)

Meteorological data are continuously collected at three sites on Bikini Atoll in support of radioecological research and monitoring programs conducted by the Health and Ecological Assessments Division at the Lawrence Livermore National Laboratory (LLNL). Weather stations were first established on Bikini Atoll in April 1990, and provide information on rainfall, wind speed and direction, air temperature, humidity, and solar radiation. These data and information are used to interpret results of remediation experiments designed to evaluate the effectiveness of potassium fertilizer on reducing the uptake of {sup 137}Cs into locally grown foods. We have also demonstrated that {sup 137}Cs is slowly leached from surface soil by the action of rain water. Long-term meteorological data are crucial to our efforts of developing an understanding of environmental processes controlling the environment loss of {sup 137}Cs in coral atoll soil. In May 2000, older data collection platforms and the DOS-based system that downloaded data from National Oceanic & Atmospheric Administration (NOAA)'s Data Automatic Processing System (DAPS) was decommissioned, and new data loggers, GOES (Geostationary Operational Environmental Satellite) transmitters and antennas were installed. Consequently, new procedures were developed to maintain the field systems, download the data, and reduce and archive the data. This document provides an operational description and status report on the three new meteorological monitoring systems on Bikini Atoll as well as an computational summary of previously recorded data. Included are overviews of procedures for sensor exchange, data recovery and reduction, and specific information about the different sensors. We also provide a description of systems maintenance and trouble shooting activities. This report will be updated on an annual basis.

Gouveia F; Bradsher, R; Brunk, J; Hamilton, T

2002-01-01T23:59:59.000Z

258

Fish Health Management Considerations in Recirculating Aquaculture Systems -Part 1  

E-Print Network [OSTI]

Cir 120 Fish Health Management Considerations in Recirculating Aquaculture Systems - Part 1 operations, and retail pet stores. When properly managed, these systems have the advantages of both reducing of nutrition and water quality, as compared to pond systems. However, recirculating systems have their own

Watson, Craig A.

259

Utility system integration and optimization models for nuclear power management  

E-Print Network [OSTI]

A nuclear power management model suitable for nuclear utility systems optimization has been developed for use in multi-reactor fuel management planning over periods of up to ten years. The overall utility planning model ...

Deaton, Paul Ferris

1973-01-01T23:59:59.000Z

260

Departmental Integrated Safety Management System (9-23-10)  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This directive will convert and consolidate DOE M 450.4-1, Integrated Safety Management System Manual and DOE M 411.1-1C, Safety Management Functions, Responsibilities, and Authorities Manual into a single Order.

2010-09-23T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

An interactive spatial information management system on the internet: the fire ant spatial information management system  

E-Print Network [OSTI]

to that information. The primary purpose of any information management system is to provide users with information that is complete, accurate, and in real-time (Obermeyer and Pinto 1994). The Internet has the capability to do just that with spatial data...

Dudek, Timothy Kirk

2000-01-01T23:59:59.000Z

262

Federal Emergency Management Information System (FEMIS) System Administration Guide for FEMIS Version 1.5  

SciTech Connect (OSTI)

The Federal Emergency Management System (FEMIS) is an emergency management planning and response tool. The FEMIS System Administration Guide provides information on FEMIS System Administrator activities as well as the utilities that are included with FEMIS.

Bower, John C. (BATTELLE (PACIFIC NW LAB)); Burnett, Robert A. (BATTELLE (PACIFIC NW LAB)); Carter, Richard J. (BATTELLE (PACIFIC NW LAB)); Downing, Timothy R. (BATTELLE (PACIFIC NW LAB)); Homer, Brian J. (BATTELLE (PACIFIC NW LAB)); Holter, Nancy A. (BATTELLE (PACIFIC NW LAB)); Johnson, Daniel M. (BATTELLE (PACIFIC NW LAB)); Johnson, Ranata L. (BATTELLE (PACIFIC NW LAB)); Johnson, Sharon M. (BATTELLE (PACIFIC NW LAB)); Loveall, Robert M. (BATTELLE (PACIFIC NW LAB)); Ramos Jr., Juan (BATTELLE (PACIFIC NW LAB)); Schulze, Stacy A. (BATTELLE (PACIFIC NW LAB)); Sivaraman, Chitra (BATTELLE (PACIFIC NW LAB)); Stephan, Alex J. (BATTELLE (PACIFIC NW LAB)); Stoops, Lamar R. (BATTELLE (PACIFIC NW LAB)); Wood, Blanche M. (BATTELLE (PACIFIC NW LAB))

2001-12-01T23:59:59.000Z

263

Introduction Operations Management of Blood Banking Systems Blood Banking Systems Network Design Supply Chain Network  

E-Print Network [OSTI]

Introduction Operations Management of Blood Banking Systems Blood Banking Systems Network Design Supply Chain Network Operations Management and Design of A Sustainable Blood Banking System Amir Masoumi of Massachusetts Amherst #12;Introduction Operations Management of Blood Banking Systems Blood Banking Systems

Nagurney, Anna

264

The Dark Energy Survey Data Management System  

E-Print Network [OSTI]

The Dark Energy Survey collaboration will study cosmic acceleration with a 5000 deg2 griZY survey in the southern sky over 525 nights from 2011-2016. The DES data management (DESDM) system will be used to process and archive these data and the resulting science ready data products. The DESDM system consists of an integrated archive, a processing framework, an ensemble of astronomy codes and a data access framework. We are developing the DESDM system for operation in the high performance computing (HPC) environments at NCSA and Fermilab. Operating the DESDM system in an HPC environment offers both speed and flexibility. We will employ it for our regular nightly processing needs, and for more compute-intensive tasks such as large scale image coaddition campaigns, extraction of weak lensing shear from the full survey dataset, and massive seasonal reprocessing of the DES data. Data products will be available to the Collaboration and later to the public through a virtual-observatory compatible web portal. Our approach leverages investments in publicly available HPC systems, greatly reducing hardware and maintenance costs to the project, which must deploy and maintain only the storage, database platforms and orchestration and web portal nodes that are specific to DESDM. In Fall 2007, we tested the current DESDM system on both simulated and real survey data. We used Teragrid to process 10 simulated DES nights (3TB of raw data), ingesting and calibrating approximately 250 million objects into the DES Archive database. We also used DESDM to process and calibrate over 50 nights of survey data acquired with the Mosaic2 camera. Comparison to truth tables in the case of the simulated data and internal crosschecks in the case of the real data indicate that astrometric and photometric data quality is excellent.

Joseph J. Mohr; Wayne Barkhouse; Cristina Beldica; Emmanuel Bertin; Y. Dora Cai; Luiz da Costa; J. Anthony Darnell; Gregory E. Daues; Michael Jarvis; Michelle Gower; Huan Lin; leandro Martelli; Eric Neilsen; Chow-Choong Ngeow; Ricardo Ogando; Alex Parga; Erin Sheldon; Douglas Tucker; Nikolay Kuropatkin; Chris Stoughton

2008-07-16T23:59:59.000Z

265

The Dark Energy Survey Data Management System  

SciTech Connect (OSTI)

The Dark Energy Survey (DES) collaboration will study cosmic acceleration with a 5000 deg2 griZY survey in the southern sky over 525 nights from 2011-2016. The DES data management (DESDM) system will be used to process and archive these data and the resulting science ready data products. The DESDM system consists of an integrated archive, a processing framework, an ensemble of astronomy codes and a data access framework. We are developing the DESDM system for operation in the high performance computing (HPC) environments at the National Center for Supercomputing Applications (NCSA) and Fermilab. Operating the DESDM system in an HPC environment offers both speed and flexibility. We will employ it for our regular nightly processing needs, and for more compute-intensive tasks such as large scale image coaddition campaigns, extraction of weak lensing shear from the full survey dataset, and massive seasonal reprocessing of the DES data. Data products will be available to the Collaboration and later to the public through a virtual-observatory compatible web portal. Our approach leverages investments in publicly available HPC systems, greatly reducing hardware and maintenance costs to the project, which must deploy and maintain only the storage, database platforms and orchestration and web portal nodes that are specific to DESDM. In Fall 2007, we tested the current DESDM system on both simulated and real survey data. We used TeraGrid to process 10 simulated DES nights (3TB of raw data), ingesting and calibrating approximately 250 million objects into the DES Archive database. We also used DESDM to process and calibrate over 50 nights of survey data acquired with the Mosaic2 camera. Comparison to truth tables in the case of the simulated data and internal crosschecks in the case of the real data indicate that astrometric and photometric data quality is excellent.

Mohr, Joseph J.; /Illinois U., Urbana, Astron. Dept. /Illinois U., Urbana; Barkhouse, Wayne; /North Dakota U.; Beldica, Cristina; /Illinois U., Urbana; Bertin, Emmanuel; /Paris, Inst. Astrophys.; Dora Cai, Y.; /NCSA, Urbana; Nicolaci da Costa, Luiz A.; /Rio de Janeiro Observ.; Darnell, J.Anthony; /Illinois U., Urbana, Astron. Dept.; Daues, Gregory E.; /NCSA, Urbana; Jarvis, Michael; /Pennsylvania U.; Gower, Michelle; /NCSA, Urbana; Lin, Huan; /Fermilab /Rio de Janeiro Observ.

2008-07-01T23:59:59.000Z

266

Reliability Based Vegetation Management Through Intelligent System Monitoring  

E-Print Network [OSTI]

Reliability Based Vegetation Management Through Intelligent System Monitoring Final Project Report Research Center since 1996 PSERC #12;Power Systems Engineering Research Center Reliability Based Vegetation project titled "Reliability Based Vegetation Maintenance Through Intelligent System Monitoring (T-27)." We

267

LED lamp power management system and method  

DOE Patents [OSTI]

An LED lamp power management system and method including an LED lamp having an LED controller 58; a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 reduces power loss in one of the channel switch 62 and the shunt switch 68 when LED lamp electronics power loss (P.sub.loss) exceeds an LED lamp electronics power loss limit (P.sub.lim); and each of the channel switches 62 receives a channel switch control signal 63 from the LED controller 58 and each of the shunt switches 68 receives a shunt switch control signal 69 from the LED controller 58.

Gaines, James; Clauberg, Bernd; Van Erp, Josephus A. M.

2013-03-19T23:59:59.000Z

268

Master Document located at: W:\\fas\\fas-Quality Management System\\Quality Management System\\01 Quality System\\02 WORK INSTRUCTIONS\\3700-3899 Facilities Coordination\\3734 Red 6 1 01 Lecturn Instructions.doc  

E-Print Network [OSTI]

Master Document located at: W:\\fas\\fas-Quality Management System\\Quality Management System\\01 Management System\\Quality Management System\\01 Quality System\\02 WORK INSTRUCTIONS\\3700-3899 Facilities Management System\\Quality Management System\\01 Quality System\\02 WORK INSTRUCTIONS\\3700-3899 Facilities

269

Facilities management system (FMS). Final report  

SciTech Connect (OSTI)

The remainder of this report provides a detailed, final status of Andersen Consulting`s participation in the FMS systems implementation project and offers suggestions for continued FMS improvements. The report presents the following topics of discussion: (1) Summary and Status of Work (2) Recommendations for Continued Success (3) Contract Deliverables and Client Satisfaction The Summary and Status of Work section presents a detailed, final status of the FMS project at the termination of Andersen`s full-time participation. This section discusses the status of each FMS sub-system and of the Andersen major project deliverables. The Recommendations section offers suggestions for continued FMS success. The topics discussed include recommendations for each of the following areas: (1) End User and Business Operations (2) AISD; Development and Computer Operations (3) Software (4) Technical Platform (5) Control Procedures The Contract Deliverables and Client Satisfaction section discusses feedback received from Johnson Controls management and FMS system users. The report also addresses Andersen`s observations from the feedback.

NONE

1992-04-01T23:59:59.000Z

270

Performance Modeling and Access Methods for Temporal Database Management Systems  

E-Print Network [OSTI]

implementation issues. Database systems with temporal support maintain history data on line together with current. Performance Modeling and Access Methods for Temporal Database Management Systems TR86-018 August. #12;Performance Modeling and Access Methods for Temporal Database Management Systems by Ilsoo Ahn

North Carolina at Chapel Hill, University of

271

A Database Management System for the Federal Courts  

E-Print Network [OSTI]

A Database Management System for the Federal Courts JACK R. BUCHANAN, RICHARD D. FENNELL Federal Making Information Systems, Inc., McLean, VA 22101; R. D. Fennell, Federal Judicial Center, Washington, D and several large-scale information management systems projects have been undertaken within the Federal

Samet, Hanan

272

Energy management system for a rotary machine and method therefor  

DOE Patents [OSTI]

In energy management system is provided for a power generating device having a working fluid intake in which the energy management system comprises an electrical dissipation device coupled to the power generating device and a dissipation device cooling system configured to direct a portion of a working fluid to the electrical dissipation device so as to provide thermal control to the electrical dissipation device.

Bowman, Michael John; Sinha, Gautam (NMN); Sheldon, Karl Edward

2004-11-09T23:59:59.000Z

273

An Open-Source Learning Content Management and Assessment System  

E-Print Network [OSTI]

LON-CAPA An Open-Source Learning Content Management and Assessment System Gerd Kortemeyer-CAPA is free open-source a learning content management system an assessment system around since 1992 #12 Cross-Institutional Resource Library (Base de Dados Compartilhada entre Instituições) Resource Assembly

274

An Architectural Approach for Integrated Network and Systems Management  

E-Print Network [OSTI]

An Architectural Approach for Integrated Network and Systems Management Raouf Boutaba 1 and Simon. The constant growth in quantity and quality of networked systems and the thereby arising problems concerning introduce an architecture for the integrated management of all resources in a networked system, i

Boutaba, Raouf

275

Optimal Shipboard Power System Management via Mixed Integer Dynamic Programming  

E-Print Network [OSTI]

Optimal Shipboard Power System Management via Mixed Integer Dynamic Programming Harry G. Kwatny' power systems using a logical specification to define the transition dynamics of the discrete subsystem following component failure(s) is a central goal of power system management including electric shipboard

Kwatny, Harry G.

276

Utility Systems Management and Operational Optimization  

E-Print Network [OSTI]

simultaneously within the context of an integrated utilities management objective. Aspen Utilities™ provides a single environment to optimize business processes relating to utilities management and substantially improves financial performance typically equivalent...

Dhole, V.; Seillier, D.; Garza, K.

277

Supplement Analysis for the Transmission System Vegetation Management...  

Broader source: Energy.gov (indexed) [DOE]

14, 2001 REPLY TO ATTN OF: KEP-4 SUBJECT: Supplement Analysis for the Transmission System Vegetation Management Program FEIS (DOEEIS-0285SA-35) James Jellison - TFOOlympia...

278

Supplement Analysis for the Transmission System Vegetation Management...  

Broader source: Energy.gov (indexed) [DOE]

5, 2001 REPLY TO ATTN OF: KEPZ992 SUBJECT: Supplement Analysis for the Transmission System Vegetation Management Program FEIS (DOEEIS-0285SA-25) Elizabeth Johnson - TFRThe...

279

Quality Management System Guidelines - Building America Top Innovation...  

Energy Savers [EERE]

(PHI) created custom quality management system guidelines for the design and construction of high performance homes, earning a 2013 Top Innovation award for their efforts....

280

Non-equilibrium quantum systems: Divergence between global and local descriptions  

E-Print Network [OSTI]

Even photosynthesis -- the most basic natural phenomenon underlying Life on Earth -- involves the non-trivial processing of excitations at the pico- and femtosecond scales during light-harvesting. The desire to understand such natural phenomena, as well as interpret the output from ultrafast experimental probes, creates an urgent need for accurate quantitative theories of open quantum systems. However it is unclear how best to generalize the well-established assumptions of an isolated system, particularly under non-equilibrium conditions. Here we compare two popular approaches: a description in terms of a direct product of the states of each individual system (i.e. a local approach) versus the use of new states resulting from diagonalizing the whole Hamiltonian (i.e. a global approach). We show that their equivalence fails when the system is open, in particular under the experimentally ubiquitous condition of a temperature gradient. By solving for the steady-state populations and calculating the heat flux as a test observable, we uncover stark differences between the formulations. This divergence highlights the need to establish rigorous ranges of applicability for such methods in modeling nanoscale transfer phenomena -- including during the light-harvesting process in photosynthesis.

Pedro D. Manrique; Ferney Rodriguez; Luis Quiroga; Neil F. Johnson

2015-02-24T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Battery Thermal Management System Design Modeling  

SciTech Connect (OSTI)

Looks at the impact of cooling strategies with air and both direct and indirect liquid cooling for battery thermal management.

Pesaran, A.; Kim, G. H.

2006-11-01T23:59:59.000Z

282

Balancing Generality and Specificity in Document Management Systems  

E-Print Network [OSTI]

Balancing Generality and Specificity in Document Management Systems W. Keith Edwards and Anthony La-purpose applications that operate on that document. KEYWORDS: document management, user interfaces, extensible. Our desktop tools are specialized to match our document management tasks and have increased

Edwards, Keith

283

Division of Information Information Systems Documentation Enterprise Systems Management Framework Version 6.0  

E-Print Network [OSTI]

Division of Information Information Systems Documentation Enterprise Systems Management Framework Version 6.0 Enterprise Systems Management Framework Version: 6.0 Date: 2 Jan 2008 Status: Endorsed Systems Management Framework Version 6.0 DOCUMENT DETAILS Document Number CIS 0002/200504466 Document

Botea, Adi

284

Managing System of Systems Requirements with a Requirements Screening Group  

SciTech Connect (OSTI)

Figuring out an effective and efficient way to manage not only your Requirement’s Baseline, but also the development of all your individual requirements during a Program’s/Project’s Conceptual and Development Life Cycle Stages can be both daunting and difficult. This is especially so when you are dealing with a complex and large System of Systems (SoS) Program with potentially thousands and thousands of Top Level Requirements as well as an equal number of lower level System, Subsystem and Configuration Item requirements that need to be managed. This task is made even more overwhelming when you have to add in integration with multiple requirements’ development teams (e.g., Integrated Product Development Teams (IPTs)) and/or numerous System/Subsystem Design Teams. One solution for tackling this difficult activity on a recent large System of Systems Program was to develop and make use of a Requirements Screening Group (RSG). This group is essentially a Team made up of co-chairs from the various Stakeholders with an interest in the Program of record that are enabled and accountable for Requirements Development on the Program/Project. The RSG co-chairs, often with the help of individual support team, work together as a Program Board to monitor, make decisions on, and provide guidance on all Requirements Development activities during the Conceptual and Development Life Cycle Stages of a Program/Project. In addition, the RSG can establish and maintain the Requirements Baseline, monitor and enforce requirements traceability across the entire Program, and work with other elements of the Program/Project to ensure integration and coordination.

Ronald R. Barden

2012-07-01T23:59:59.000Z

285

Increase Productivity - Implement Energy Management Systems with Project Management Techniques  

E-Print Network [OSTI]

Engineering Manager of this small but active division, I devote a big part of my time on justifying energy expenditures and the means to reduce these costs. Ten years ago energy costs were one tenth of today's costs and just about three percent of the division...

Spinner, M. P.

1984-01-01T23:59:59.000Z

286

Management of Control System Information SecurityI: Control System Patch Management  

SciTech Connect (OSTI)

The use of information technologies in control systems poses additional potential threats due to the frequent disclosure of software vulnerabilities. The management of information security involves a series of policy-making on the vulnerability discovery, disclosure, patch development and patching. In this paper, we use a system approach to devise a model to understand the interdependencies of these decision processes. In more details, we establish a theoretical framework for making patching decision for control systems, taking into account the requirement of functionability of control systems. We illustrate our results with numerical simulations and show that the optimal operation period of control systems given the currently estimated attack rate is roughly around a half a month.

Quanyan Zhu; Miles McQueen; Craig Rieger; Tamer Basar

2011-09-01T23:59:59.000Z

287

Customer System Efficiency Improvement Assessment: Description and examination of system characterization data  

SciTech Connect (OSTI)

This report describes three data bases that were developed in the Customer System Efficiency Improvement (CSEI) Assessment project to help characterize transmission and distribution (T and D) system losses experienced by utility customers in the Pacific Northwest. A principal objective of this project is to assess the potential for electric energy conservation in the T and D systems of BPA's utility customers. The three data bases provide essential input on the number and operating characteristics of T and D component stocks that was used in another task of the CSEI Project to estimate the conservation supply functions that result from replacing existing stocks with more efficient components (Tepel et al. 1986). This document describes the three data bases, provides a guide to their use, and presents a summary characterization of the principal loss-generating components (lines and transformers) of the region's T and D systems.

Callaway, J.W.; DeSteese, J.G.

1986-12-01T23:59:59.000Z

288

Assessment of effectiveness of geologic isolation systems: a short description of the AEGIS approach  

SciTech Connect (OSTI)

To meet licensing criteria and protection standards for HLW disposal, research programs are in progress to determine acceptable waste forms, canisters, backfill materials for the repository, and geological formations. Methods must be developed to evaluate the effectiveness of the total system. To meet this need, methods are being developed to assess the long-term effectiveness of isolating nuclear wastes in geologic formations. This work was started in 1976 in the Waste Isolation Safety Assessment Program (WISAP) and continues in the Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) Program. The evaluation of this long-term effectiveness involves a number of distinct steps. AEGIS currently has the methods for performing these evaluation steps. These methods are continuously being improved to meet the inreasing level of sophistication which will be required. AEGIS develops a conceptual description of the geologic systems and uses computer models to simulate the existing ground-water pathways. AEGIS also uses a team of consulting experts, with the assistance of a computer model of the geologic processes, to develop and evaluate plausible release scenarios. Then other AEGIS computer models are used to simulate the transport of radionuclides to the surface and the resultant radiation doses to individuals and populations. (DLC)

Silviera, D.J.; Harwell, M.A.; Napier, B.A.; Zellmer, J.T.; Benson, G.L.

1980-09-01T23:59:59.000Z

289

A management information system model for convenience stores  

E-Print Network [OSTI]

of infomna- tion that convenience store managers can use to accomplisll coimoany objecti v s . This model will serv as a guide with which convenience store companies can set up thei r own management information systems . ~si. Obj eii es 1) Identify...', and 6) the organizational impact of a manage- ment information system. E~i i 1 R h i ll g I I 0 ~tip. 5 -. +s The majority of research on management information systems has been theoretically oriented. Little empirical research has been achieved...

Moede, Eric Arne

1978-01-01T23:59:59.000Z

290

Recommended Practice for Patch Management of Control Systems  

SciTech Connect (OSTI)

A key component in protecting a nation’s critical infrastructure and key resources is the security of control systems. The term industrial control system refers to supervisory control and data acquisition, process control, distributed control, and any other systems that control, monitor, and manage the nation’s critical infrastructure. Critical Infrastructure and Key Resources (CIKR) consists of electric power generators, transmission systems, transportation systems, dam and water systems, communication systems, chemical and petroleum systems, and other critical systems that cannot tolerate sudden interruptions in service. Simply stated, a control system gathers information and then performs a function based on its established parameters and the information it receives. The patch management of industrial control systems software used in CIKR is inconsistent at best and nonexistent at worst. Patches are important to resolve security vulnerabilities and functional issues. This report recommends patch management practices for consideration and deployment by industrial control systems owners.

Steven Tom; Dale Christiansen; Dan Berrett

2008-12-01T23:59:59.000Z

291

LRRB Pavement Management SystemsTraffic Generator Managing Interaction Between Local  

E-Print Network [OSTI]

% of their energy from renewable sources by 2025. #12;LRRB Pavement Management SystemsTraffic Generator MN Wind Resource #12;LRRB Pavement Management SystemsTraffic Generator Wind Power (continued) · Advantage: · Energy Anderson, Stearns County Deb Bloom, City of Roseville Bruce Hasbargen, Lk of Woods Cty Steve Koehler, City

Minnesota, University of

292

Mechanical Engineer Company Description  

E-Print Network [OSTI]

Mechanical Engineer Company Description Control Solutions Inc. is a small, dynamic, and rapidly. Position Description The Mechanical Engineer is responsible for all aspects associated with the mechanical enclosures, brackets, cabling assemblies among others. Systems include mechanisms, sensors, hydraulics, among

Kostic, Milivoje M.

293

Harrison Radiator Division's Energy Management, Reporting and Accounting System  

E-Print Network [OSTI]

HARRISON RADIATOR DIVISION'S ENERGY MANAGEMENT, REPORTING and ACCOUNTING SYSTEM Ronald J. Goubeaux Harrison Radiator Division Lockport, New York ABSTRACT Energy management is essential for obtaining the lowest possible product..., farm equipment, small aircraft and other types of vehicles. The energy management, reporting and accounting system that is covered in this paper is operating in Harrison's West Complex of the New York Operations located in Lockport, Western...

Goubeaux, R. J.

294

Design and implementation of a departmental information management system  

E-Print Network [OSTI]

Management System (DBMS); 4. logical design; 5. physical design and 6. implementation. The following section brie y walks through each step [5]. The goals of the requirements analysis (Step 1) are to determine the data re- quirements of the database in terms... program, a degree program involves di erent documents. A Database Management System (DBMS) is computer software designed for the purpose of managing databases. Typical examples of DBMSs include Oracle, Microsoft SQL Server, and MySQL. Step 3 involves...

Xie, Dawen

2009-05-15T23:59:59.000Z

295

Sandia National Laboratories, California Environmental Management System program manual.  

SciTech Connect (OSTI)

The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 436.1.

Larsen, Barbara L.

2013-04-01T23:59:59.000Z

296

SNL/CA Environmental Management System Program Manual.  

SciTech Connect (OSTI)

The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program was developed in accordance with Department of Energy (DOE) Order 450.1 and incorporates the elements of the International Standard on Environmental Management Systems, ISO 14001.

Larsen, Barbara L.

2005-09-01T23:59:59.000Z

297

West Virginia University 1 Department of Industrial and Management Systems  

E-Print Network [OSTI]

West Virginia University 1 Department of Industrial and Management Systems Engineering Degrees in industrial engineering · Master of science in industrial hygiene · Master of science in safety management. The ability to design and implement or improve integrated systems that include people, materials, information

Mohaghegh, Shahab

298

Aviation Safety + Security Program GLOBAL EXPERTS IN SAFETY MANAGEMENT SYSTEMS  

E-Print Network [OSTI]

2010- 2011 Aviation Safety + Security Program GLOBAL EXPERTS IN SAFETY MANAGEMENT SYSTEMS Relevance and currency -- that is what drives the Aviation Safety and Security Program of the USC Viterbi that our core course, Aviation Safety Management Systems, is so necessary in ensuring the safety

Wang, Hai

299

Control-Based Quality Adaptation in Data Stream Management Systems  

E-Print Network [OSTI]

in a traditional DBMS, the processing of continuous queries in a data stream management system (DSMS) needs elements. Processing of data streams brings great challenges to DBMS design for two major reasons. First Management Systems 747 very common in data stream applications. Unlike those in a traditional DBMS, queries

Hefeeda, Mohammed

300

POEMS: A Transformable Architecture for Managing System Overload  

E-Print Network [OSTI]

, a central database management system (DBMS) receives requests internally or externally through an Internet result in the overload of the DBMS. Existing load management systems assume nodes are fully dedicated-server and Peer-to-Peer (P2P) architecture; it operates as a conventional DBMS under normal load condition without

Ooi, Beng Chin

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Original article Characterisation of apple orchard management systems  

E-Print Network [OSTI]

Original article Characterisation of apple orchard management systems in a French Mediterranean) Abstract ­ The objective of our study was to characterise cropping systems in apple arboriculture in the less sensitive areas. apple orchard / on-farm survey / cultivation operation / management indicator

Paris-Sud XI, Université de

302

Resources Annotation, Retrieval and Presentation: a Semantic Annotation Management System  

E-Print Network [OSTI]

Resources Annotation, Retrieval and Presentation: a Semantic Annotation Management System M. Albert@univ-brest.fr ABSTRACT This paper addresses the problem of the management of resources metadata. A variety of responses resources that enable more intelligent information discovery systems [1]. According to [1], a metadata

Paris-Sud XI, Université de

303

Inventory management with dynamic Bayesian network software systems  

E-Print Network [OSTI]

Inventory management with dynamic Bayesian network software systems Mark Taylor1 and Charles Fox2 1.fox@sheffield.ac.uk Abstract. Inventory management at a single or multiple levels of a supply chain is usually performed-the-shelf graphical software systems. We show how such sys- tems may be deployed to model a simple inventory problem

Barker, Jon

304

Business Process Management Systems enabling continuous improvement in industrial services  

E-Print Network [OSTI]

Business Process Management Systems ­ enabling continuous improvement in industrial services Heikki that modern business process management systems (BPMS) provide in improving industrial service processes. A case study identifies improvement opportunities in the order-to- cash process in two service lines

Paris-Sud XI, Université de

305

ORISE: Asset Readiness Management System (ARMS)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

equipment has been maintained. ARMS will notify a program manager via e-mail prior to any qualification lapsing. Similarly, equipment maintainers receive e-mail notifications of...

306

The Bachelor of Management degree in Management Information Systems is a minimum of 40 courses in length. Admission to the Faculty may occur at the end of Year One. Students are required to have the following courses for  

E-Print Network [OSTI]

The Bachelor of Management degree in Management Information Systems is a minimum of 40 courses-language university. BachelorofManagement ManagementInformationSystems Name Technology Management 4090 - Management Policy and Strategy Management 4840 - Systems Analysis Management

Seldin, Jonathan P.

307

Carnegie Mellon University 70-451 Management Information Systems: Spring 2012Carnegie Mellon University 70-451 Management Information Systems: Spring 2012 1Carnegie Mellon University 70-451 Management Information Systems: Spring 2012 1Carnegie Mellon Univ  

E-Print Network [OSTI]

Carnegie Mellon University 70-451 Management Information Systems: Spring 2012Carnegie Mellon University 70-451 Management Information Systems: Spring 2012 1Carnegie Mellon University 70-451 Management Information Systems: Spring 2012 1Carnegie Mellon University 70-451 Management Information Systems: Spring

Gatterbauer, Wolfgang

308

Advance View Proofs Thermodynamic Description of the Mg-Mn, Al-Mn and Mg-Al-Mn Systems  

E-Print Network [OSTI]

Advance View Proofs Thermodynamic Description of the Mg-Mn, Al-Mn and Mg-Al-Mn Systems Using-consistent thermodynamic model of the Mg-Mn, Al-Mn and Mg-Al-Mn systems has been developed. The major difference between work on the Al-Mn system that uses the same model for the liquid phase reveals that better agreement

Medraj, Mamoun

309

Forest Landscape Description and  

E-Print Network [OSTI]

Forest Landscape Description and Inventories a basis for landplanning and design Pacific Southwest landscape description and inventories ­ a basis for land plan- ning and design. Berkeley, Calif., Pacific SW. Illustrates their application in two inventories made to aid managers and landscape architects in planning

Standiford, Richard B.

310

Brawley 10 MW Geothermal Plant Plant Manual for Southern Californa Edison Company and Union Oil Company of California. Volume I. Systems Descriptions  

SciTech Connect (OSTI)

This volume covers Systems Descriptions. It presents each system of the facility and discusses basic features. Brief discussion of each piece of major equipment in system and design conditions.

None

1980-11-28T23:59:59.000Z

311

Spent nuclear fuel project cold vacuum drying facility tempered water and tempered water cooling system design description  

SciTech Connect (OSTI)

This document provides the System Design Description (SDD) for the Cold Vacuum Drying Facility (CVDF) Tempered Water (TW) and Tempered Water Cooling (TWC) System . The SDD was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998), The HNF-SD-SNF-DRD-O02, 1998, Cold Vacuum Drying Facility Design Requirements, and the CVDF Design Summary Report. The SDD contains general descriptions of the TW and TWC equipment, the system functions, requirements and interfaces. The SDD provides references for design and fabrication details, operation sequences and maintenance. This SOD has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

IRWIN, J.J.

1998-11-30T23:59:59.000Z

312

An evaluation of the management system verification pilot at Hanford  

SciTech Connect (OSTI)

The Chemical Management System (CMS), currently under development at Hanford, was used as the ''test program'' for pilot testing the value added aspects of the Chemical Manufacturers Association's (CMA) Management Systems Verification (MSV) process. The MSV process, which was developed by CMA's member chemical companies specifically as a tool to assist in the continuous improvement of environment, safety and health (ESH) performance, represents a commercial sector ''best practice'' for evaluating ESH management systems. The primary purpose of Hanford's MSV Pilot was to evaluate the applicability and utility of the MSV process in the Department of Energy (DOE) environment. However, because the Integrated Safety Management System (ISMS) is the framework for ESH management at Hanford and at all DOE sites, the pilot specifically considered the MSV process in the context of a possible future adjunct to Integrated Safety Management System Verification (ISMSV) efforts at Hanford and elsewhere within the DOE complex. The pilot involved the conduct of two-hour interviews with four separate panels of individuals with functional responsibilities related to the CMS including the Department of Energy Richland Operations (DOE-RL), Fluor Daniel Hanford (FDH) and FDH's major subcontractors (MSCS). A semi-structured interview process was employed by the team of three ''verifiers'' who directed open-ended questions to the panels regarding the development, integration and effectiveness of management systems necessary to ensure the sustainability of the CMS effort. An ''MSV Pilot Effectiveness Survey'' also was completed by each panel participant immediately following the interview.

BRIGGS, C.R.

1998-11-12T23:59:59.000Z

313

SERVICE ORIENTED ARCHITECTURES FOR BUSINESS PROCESS MANAGEMENT SYSTEMS  

E-Print Network [OSTI]

SERVICE ORIENTED ARCHITECTURES FOR BUSINESS PROCESS MANAGEMENT SYSTEMS ABSTRACT The integration of research in the area of Service Oriented Architectures (SOA) with current methodologies and tools of on-going research in the application of Service Oriented Architectures in Business Process Management

Marchese, Maurizio

314

Towards an Intelligent system for managing Historical Archive Documents  

E-Print Network [OSTI]

Towards an Intelligent system for managing Historical Archive Documents Akrivi Katifori-ontology expert users exploring ontologies. · The study of the possibilities of supporting user document and task management by using a personal ontology. · The implementation and evaluation of an algorithm using

Kouroupetroglou, Georgios

315

Environmental Management System 2 2006 Site environmental report2-  

E-Print Network [OSTI]

was designed to meet the rigorous requirements of the globally recognized International Organization: environmental management SyStem DRAFT gain registration to the ISO 400 and OHSAS 800 standards, an organization for Standardization (ISO) 14001 Environmental Management Standard, with additional emphasis on compliance, pollution

316

Leadership in Health Care Systems: Health Care Organization Management  

E-Print Network [OSTI]

Leadership in Health Care Systems: Health Care Organization Management and Leadership Track: ­ Health Care Organization, Management and Leadership ­ Clinical Research Coordinator ­ Clinical Nurse in health care ethics ­ Public mission ­ Fiscal stewardship ­ Inclusiveness and diversity ­ Theory based

Goldman, Steven A.

317

A Smart Energy System: Distributed Resource Management, Control and Optimization  

E-Print Network [OSTI]

A Smart Energy System: Distributed Resource Management, Control and Optimization Yong Ding, Student of distributed energy resource and consumption management, which proposes to design a networked and embedded platform for realizing a dynamic energy mix and optimizing the energy consumption dy- namically. Based

Beigl, Michael

318

Coding Hazardous Tree Failures for a Data Management System  

E-Print Network [OSTI]

management; computer programs; coding. The Author Lee A. Paine is a forest pathologist, stationed in Berkeley in the manual on the indicated pages. Page 7, just above H. Property or Person Directly Affected, insert: CityCoding Hazardous Tree Failures for a Data Management System Lee A. Paine PACIFIC SOUTHWEST

Standiford, Richard B.

319

Appropriate Technologies and Systems to respond to Climate Change, Improved Water Resources Management, Waste Management and Sanitation  

E-Print Network [OSTI]

Resources Management, Waste Management and Sanitation A Review of Water Information Systems in the English to adequately manage the resource and institute measures to equitably allocate water among the various competing in the management of the resource. This paper examines the water information systems of St. Lucia, Jamaica

Barthelat, Francois

320

EC417: Electric Energy Systems: Adapting to Renewable Resources Description: This course will present a detailed perspective of electric power systems  

E-Print Network [OSTI]

EC417: Electric Energy Systems: Adapting to Renewable Resources Description: This course such as photovoltaics and wind. Conventional approaches will be presented with emphasis to future technology Circuits (EK307) Course Topics: 1. Brief History of Power Systems (the great AC-DC battle) 2. Basic

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Asset Management System (AMS) for Property Custodians Quick Reference Guide Page 1 of 31  

E-Print Network [OSTI]

Asset Management System (AMS) for Property Custodians ­ Quick Reference Guide Page 1 of 31 Accessing the Asset Management System (AMS) 1) Sign into MyLSU #12;Asset Management System (AMS Management" 3) When you see the SSO Welcome screen (above), click "OK". #12;Asset Management System (AMS

Stephens, Jacqueline

322

The Bachelor of Management degree in Management Information Systems is a minimum of 40 courses in length. Admission to the Faculty may occur at the end of Year One. Students are required to have completed the following  

E-Print Network [OSTI]

The Bachelor of Management degree in Management Information Systems is a minimum of 40 courses. BachelorofManagement ManagementInformationSystems Name Systems Management Management 3080 - Managerial Skill Development *Management 3380 - Technological Change

Seldin, Jonathan P.

323

The Bachelor of Management degree in Management Information Systems is a minimum of 40 courses in length. Admission to the Faculty may occur at the end of Year One. Students are required to have completed the following  

E-Print Network [OSTI]

The Bachelor of Management degree in Management Information Systems is a minimum of 40 courses. BachelorofManagement ManagementInformationSystems Name Systems Management Management 3080 - Managerial Skill Development Management 3380 - Technological Change

Seldin, Jonathan P.

324

ISO 50001: A Global Energy Management System Standard  

E-Print Network [OSTI]

ISO 50001:2011 provides benefits for any organization to establish a framework to manage and improve energy consumption. The framework of ISO 50001:2011 enables organizations to establish the systems and processes necessary to improve energy...

Chowdhury, N.

2013-01-01T23:59:59.000Z

325

A system engineering approach to improving vehicle NVH attribute management  

E-Print Network [OSTI]

This research is comprised of a detailed study of attribute management processes at a North American Automotive OEM (NA OEM) that has just introduced a new product development system intended to drastically reduce product ...

Sacka, Michelle Lorraine

2008-01-01T23:59:59.000Z

326

New Demands on Heavy Duty Engine Management Systems  

Broader source: Energy.gov (indexed) [DOE]

on Heavy Duty Engine Management Systems Excellence in Automotive R&D Emissions Based Process Control NOx-Reducing by EGR NOx -Reducing by SOI Freez e Activation Signal...

327

15.568A Management Information Systems, Spring 2003  

E-Print Network [OSTI]

The course purpose is to provide the substance and skill necessary to make sound business decisions relating to information systems, and to work with senior line managers in the resolution of issues and problems in this ...

Gibson, Cyrus F.

328

Buildings and corporate strategy : towards a management system model  

E-Print Network [OSTI]

This thesis focuses on buildings as a subject of attention and inquiry in a corporate setting. It attempts to draw implications for the design of a management system to deal with the special nature of buildings as a resource. ...

Brana, Rodrigo

1985-01-01T23:59:59.000Z

329

Linear Road : benchmarking stream-based data management systems  

E-Print Network [OSTI]

This thesis describes the design, implementation, and execution of the Linear Road benchmark for stream-based data management systems. The motivation for benchmarking and the selection of the benchmark application are ...

Tibbetts, Richard S. (Richard Singleton), 1979-

2003-01-01T23:59:59.000Z

330

Demand Control Utilizing Energy Management Systems - Report of Field Tests  

E-Print Network [OSTI]

Energy Management systems and particularly demand controllers are becoming more popular as commercial and light industrial operations attempt to reduce their electrical usage and demand. Numerous techniques are used to control energy use and demand...

Russell, B. D.; Heller, R. P.; Perry, L. W.

1984-01-01T23:59:59.000Z

331

Systems Engineering Introduction to Software Quality Management  

E-Print Network [OSTI]

for quality management ISO 9001:2000 is a generic model of the quality process; ISO 9001:2008 clarifies ISO 9001:2000 ISO 9001:2008 applicable to any organisation that designs, develops and maintains products (or services) ISO 9000-3 interprets 9001 for software dev. 12 Features of ISO 9001:2008 Organisational

Bryson, Joanna J.

332

SNL/CA Environmental Management System Program Manual.  

SciTech Connect (OSTI)

The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004. Elements of the ISO standard overlap with those of Department of Energy (DOE) Order 450.1, thus SNL/CA's EMS program also meets the DOE requirements.

Larsen, Barbara L.

2007-04-01T23:59:59.000Z

333

Energy Management and Control System: Desired Capabilities and Functionality  

SciTech Connect (OSTI)

This document discusses functions and capabilities of a typical building/facility energy management and control systems (EMCS). The overall intent is to provide a building operator, manager or engineer with basic background information and recommended functions, capabilities, and good/best practices that will enable the control systems to be fully utilized/optimized, resulting in improved building occupant quality of life and more reliable, energy efficient facilities.

Hatley, Darrel D.; Meador, Richard J.; Katipamula, Srinivas; Brambley, Michael R.; Wouden, Carl

2005-04-29T23:59:59.000Z

334

Using Energy Management Control Systems for HVAC Operational Diagnostics  

E-Print Network [OSTI]

USING ENERGY MANAGEMENT CONTROL SYSTEMS FOR HVAC OPERATIONAL DIAGNOSTICS Karl Stum, P.E. Portland Energy Conservation, Inc. 92 1 SW Washington, Suite 3 12 Portland, OR 97205 503-248-4636 Fax 503-295-0820 ABSTRACT The power and flexibility... Proceedings, June 1997. Meyers, S.; E. Mills; A. Chen; L. Demsetz "Building Data Visualization for Diagnostics," ASHRAE Journal, June 1996. PECl (Portland Energy Conservation, Inc.). Energy Management C0ntrof Systems-A Practical Guiak, 1997. Sparks, R...

Stum, K.

1998-01-01T23:59:59.000Z

335

An Open-Source Learning Content Management and Assessment System  

E-Print Network [OSTI]

LON-CAPA An Open-Source Learning Content Management and Assessment System Gerd Kortemeyer Michigan system an assessment system around since 1992 #12;Free and Open-Source · Free: "Free beer=split(/\\,/,$line); $username=$entries[4]; _ #12;Campus A Campus B LON-CAPA Architecture Shared Cross-Institutional Resource

336

Project Description: page 1 Project Description  

E-Print Network [OSTI]

Project Description: page 1 Project Description I. Introduction: Josephson junction networks Over the past 25 years, superconducting Josephson junctions have gradually become one of the major topics standards. Our research uses Josephson junctions as model systems for problems in nonlinear and neural

Segall, Ken

337

Agencies and their Jurisdictional Responsibilities Brief descriptions of major land management agencies in the subbasin and their  

E-Print Network [OSTI]

management agencies in the subbasin and their jurisdictional responsibilities with respect to fish within the Flathead Subbasin. BPA actions to manage and restore fish and wildlife include operating dams in such a manner that they protect and maintain conditions for fish and wildlife populations within specified

338

T-606: Sun Java System Access Manager Lets Remote Users Partially...  

Broader source: Energy.gov (indexed) [DOE]

6: Sun Java System Access Manager Lets Remote Users Partially Modify Data and Remote Authenticated Users Partially Access Data T-606: Sun Java System Access Manager Lets Remote...

339

ORISE: Performance Improvement Management System (PIMS)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory |CHEMPACK MappingHistory TheManagement Man

340

Advanced Management of Compressed Air Systems  

Office of Energy Efficiency and Renewable Energy (EERE)

Find out how a compressed air system works and the benefits of optimal compressed air system performance. This training is designed to help end users as well as industry solution providers learn...

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Methodology for assessing performance of waste management systems  

SciTech Connect (OSTI)

The purpose of the methodology provided in this report is to select the optimal way to manage particular sets of waste streams from generation to disposal in a safe and cost-effective manner. The methodology described is designed to review the entire waste management system, assess its performance, ensure that the performance objectives are met, compare different LLW management alternatives, and select the optimal alternative. The methodology is based on decision analysis approach, in which costs and risk are considered for various LLW management alternatives, a comparison of costs, risks, and benefits is made, and an optimal system is selected which minimizes costs and risks and maximizes benefits. A ''zoom-lens'' approach is suggested, i.e., one begins by looking at gross features and gradually proceeds to more and more detail. Performance assessment requires certain information about the characteristics of the waste streams and about the various components of the waste management system. Waste acceptance criteria must be known for each component of the waste management system. Performance assessment for each component requires data about properties of the waste streams and operational and design characteristics of the processing or disposal components. 34 refs., 2 figs., 1 tab.

Meshkov, N.K.; Herzenberg, C.L.; Camasta, S.F.

1988-01-01T23:59:59.000Z

342

Lighting system with thermal management system having point contact synthetic jets  

DOE Patents [OSTI]

Lighting system having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system includes a plurality of synthetic jets. The synthetic jets are arranged within the lighting system such that they are secured at contact points.

Arik, Mehmet; Weaver, Stanton Earl; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Sharma, Rajdeep

2013-12-10T23:59:59.000Z

343

Integrated Distribution Management System for Alabama Principal Investigator  

SciTech Connect (OSTI)

Southern Company Services, under contract with the Department of Energy, along with Alabama Power, Alstom Grid (formerly AREVA T&D) and others moved the work product developed in the first phase of the Integrated Distribution Management System (IDMS) from “Proof of Concept” to true deployment through the activity described in this Final Report. This Project – Integrated Distribution Management Systems in Alabama – advanced earlier developed proof of concept activities into actual implementation and furthermore completed additional requirements to fully realize the benefits of an IDMS. These tasks include development and implementation of a Distribution System based Model that enables data access and enterprise application integration.

Schatz, Joe

2013-03-31T23:59:59.000Z

344

Architecture for a Generalized Emergency Management Software System  

SciTech Connect (OSTI)

The Federal Emergency Management Information System (FEMIS) was originally developed for the Chemical Stockpile Emergency Preparedness Program (CSEPP). It has evolved from a CSEPP-specific emergency management software system to a general-purpose system that supports multiple types of hazards. The latest step in the evolution is the adoption of a hazard analysis architecture that enables the incorporation of hazard models for each of the hazards such that the model is seamlessly incorporated into the FEMIS hazard analysis subsystem. This paper describes that new architecture.

Hoza, Mark; Bower, John C.; Stoops, LaMar R.; Downing, Timothy R.; Carter, Richard J.; Millard, W. David

2002-12-19T23:59:59.000Z

345

An Experimental Metagenome Data Management and AnalysisSystem  

SciTech Connect (OSTI)

The application of shotgun sequencing to environmental samples has revealed a new universe of microbial community genomes (metagenomes) involving previously uncultured organisms. Metagenome analysis, which is expected to provide a comprehensive picture of the gene functions and metabolic capacity of microbial community, needs to be conducted in the context of a comprehensive data management and analysis system. We present in this paper IMG/M, an experimental metagenome data management and analysis system that is based on the Integrated Microbial Genomes (IMG) system. IMG/M provides tools and viewers for analyzing both metagenomes and isolate genomes individually or in a comparative context.

Markowitz, Victor M.; Korzeniewski, Frank; Palaniappan, Krishna; Szeto, Ernest; Ivanova, Natalia N.; Kyrpides, Nikos C.; Hugenholtz, Philip

2006-03-01T23:59:59.000Z

346

Sediment management in sustainable urban drainage system ponds  

E-Print Network [OSTI]

Sediment management in sustainable urban drainage system ponds K.V. Heal*, D.A. Hepburn** and R.lunn@strath.ac.uk) Abstract Since removal and disposal of sustainable urban drainage system (SUDS) sediment can incur high maintenance costs, assessments of sediment volumes, quality and frequency of removal are required. Sediment

Heal, Kate

347

Power Optimization and Management in Embedded Systems1 Massoud Pedram  

E-Print Network [OSTI]

1 Power Optimization and Management in Embedded Systems1 Massoud Pedram University of Southern under contract number DAAB07-00-C-L516. Abstract Power-efficient design requires reducing power on the system performance and quality of service (QoS). Power-aware high-level language compilers, dynamic power

Pedram, Massoud

348

Web Service Access Management for Integration with Agent Systems  

E-Print Network [OSTI]

Web Service Access Management for Integration with Agent Systems B.J. Overeinder, P.D. Verkaik, from the perspective of agent systems (and not as is gen- erally the case by web service providers). Mediating between web service requests from (virtual) organizations of agents, the web ser- vice gateway

349

Running Head: WHAT ARE LEARNING MANAGEMENT SYSTEMS 1 An Argument for Clarity: What are Learning Management Systems, What are They Not,  

E-Print Network [OSTI]

Running Head: WHAT ARE LEARNING MANAGEMENT SYSTEMS 1 An Argument for Clarity: What are Learning Management Systems, What are They Not, and What Should They Become? William R. Watson Indiana University. Indianapolis, IN 46234 Keywords: Course Management Systems, E-learning, Integrated Learning System, Learning

Paris-Sud XI, Université de

350

Best Management Practice #8: Steam Boiler Systems  

Broader source: Energy.gov [DOE]

Boilers and steam generators are commonly used in large heating systems, institutional kitchens, or in facilities where large amounts of process steam are used. This equipment consumes varying amounts of water depending on system size, the amount of steam used, and the amount of condensate returned.

351

Graduate School of Creative Science and Engineering Department of Industrial and Management Systems Engineering  

E-Print Network [OSTI]

Graduate School of Creative Science and Engineering Department of Industrial and Management and Engineering Department of Industrial and Management Systems Engineering Research Instruction Application; Graduate School of Creative Science and Engineering Department of Industrial and Management Systems

Kaji, Hajime

352

Demand Side Management (DSM) Through Absorption Refrigeration Systems  

E-Print Network [OSTI]

DEMAND SIDE MANAGEMENT (DSM) TIIROUGH ABSORPTION REFRIGERATION SYSTEMS Peter Y. Chao, PhD, Deepak Shukla, PhD, Sr. Process Engineers, TENSA Services, Inc. Ammi Amarnath, Sr. Project Manager, Electrical Power Research Institute Ed. Mergens.... They are Peak Clipping, Valley filling, Load Shifting, Strategic Conservation, Strategic Load Growth, and Flexible Load Shaping. Absorption Refrigeration from waste heat offers a viable option for DSM. This will either reduce the peak load (peak clipping...

Chao, P. Y.; Shukla, D.; Amarnath, A.; Mergens, E.

353

Organization as Innovation: China’s Human Spaceflight Program’s Efforts to Instill a Quality Management System  

E-Print Network [OSTI]

to Instill a Quality Management System Kevin Pollpeterthat China’s quality management system was not suitable to

Pollpeter, Kevin

2011-01-01T23:59:59.000Z

354

Pseudomodes as an effective description of memory: Non-Markovian dynamics of two-state systems in structured reservoirs  

E-Print Network [OSTI]

We investigate the non-Markovian dynamics of two-state systems in structured reservoirs. We establish a connection between two theoretical quantum approaches, the pseudomodes [B. M. Garraway, Phys. Rev. A 55, 2290 (1997)] and the recently developed non-Markovian quantum jump method [J. Piilo et al., Phys. Rev. Lett. 100, 180402 (2008)]. This connection provides a clear physical picture of how the structured reservoir affects the system dynamics, indicating the role of the pseudomodes as an effective description of the environmental memory.

L. Mazzola; S. Maniscalco; J. Piilo; K. -A. Suominen; B. Garraway

2009-11-23T23:59:59.000Z

355

Voices of Experience | Advanced Distribution Management Systems...  

Office of Environmental Management (EM)

systems that are unable to integrate with new technologies and that sta can no longer support. 4. Regulation-the ability to accommodate changes that encourage reliability and e...

356

Introducing Energy Management Systems into Smaller Facilities  

E-Print Network [OSTI]

Many small and medium sized commercial buildings are energy hogs. Typically they were designed and built to meet low first cost criteria. Control system capability is usually minimal, insulation is thin, glass areas are large, and HVAC equipment...

Lawrence, J. A.

1983-01-01T23:59:59.000Z

357

ExxonMobil Global Energy Management System  

E-Print Network [OSTI]

of our refineries and chemical plants. The system builds on international best practices and benchmarking to identify energy efficiencies. Launched in 2000, it utilizes a common methodology to identify performance gaps, implement closure plans, sustain...

Roberto, F.

358

Power Contro Energy Management and Market Systems  

SciTech Connect (OSTI)

More efficient use of the nation's electrical energy infrastructure will result in minimizing the cost of energy to the end user. Using real time electrical market information coupled with defined rules, market opportunities can be identified that provide economic benefit for both users and marketers of electricity. This report describes the design of one such system and the features a fully functional system would provide. This report documents several investigated methods of controlling load diversity or shifting.

Tom Addison; Andrew Stanbury

2005-12-15T23:59:59.000Z

359

ESDIS_ISO Trng_Nov2010.docx Management System Training  

E-Print Network [OSTI]

Quality Manual and supporting directives and procedures identify the Management System (MS) process: MS was formerly called QMS, Quality Management System) Management System Training Requirement: AllESDIS_ISO Trng_Nov2010.docx Management System Training ESDIS Project (November 2010) The Goddard

Christian, Eric

360

Stochastic Modeling of a Power-Managed System: Construction and Optimization  

E-Print Network [OSTI]

Stochastic Modeling of a Power-Managed System: Construction and Optimization Qinru Qiu, Qing Wu of a power-managed electronic system. We formulate the problem of system-level power management improvements. Dynamic power management ­ which refers to selective shut-off or slow-down of system components

Qiu, Qinru

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Stochastic Modeling of a Power-Managed System: Construction and Optimization  

E-Print Network [OSTI]

1 Stochastic Modeling of a Power-Managed System: Construction and Optimization Qinru Qiu, Qing Wu of a power-managed electronic system. We formulate the problem of system-level power management-digital components. Dynamic power management ­ which refers to a selective shut-off or slow-down of system components

Pedram, Massoud

362

A Context Driven Information Retrieval for Online Urban Disaster Management System  

E-Print Network [OSTI]

A Context Driven Information Retrieval for Online Urban Disaster Management System Khaldoun ZREIK of Disaster Managing Approaches depends firmly on information and communication management system. Due to the interactive decision board, an optimised Data Base Management System, a light Geographical Information System

Paris-Sud XI, Université de

363

System team composition for a complex system to enable integration and attribute management  

E-Print Network [OSTI]

The automatic transmission is a very complex system in a modern automobile with several hundred components performing mechanical, hydraulic and electronic functions. System integration and attribute management are key ...

Krishnaswami, Ram, 1966-

2004-01-01T23:59:59.000Z

364

Abstract--Autonomic computing systems are intelligent systems that manage their own performance. An important characteristic  

E-Print Network [OSTI]

their workloads. For a complex system such as the database management system (DBMS) to be self-managing, it should be adaptive to the type of the workload put upon it. Identifying the workload type is key to tuning a DBMS that automatically recognizes the workload type and assesses each type's concentration. Since a DBMS may experience

365

A description of the thermal power system analyser structure and commands  

E-Print Network [OSTI]

This report describes a system comprised of a set of interactive commands and a data base which aids in the modeling of thermal power systems with the aid of a computer. This system, named TPSA (Thermal Power System ...

Margulies, B. I.

1980-01-01T23:59:59.000Z

366

DAS: a data management system for instrument tests and operations  

E-Print Network [OSTI]

The Data Access System (DAS) is a metadata and data management software system, providing a reusable solution for the storage of data acquired both from telescopes and auxiliary data sources during the instrument development phases and operations. It is part of the Customizable Instrument WorkStation system (CIWS-FW), a framework for the storage, processing and quick-look at the data acquired from scientific instruments. The DAS provides a data access layer mainly targeted to software applications: quick-look displays, pre-processing pipelines and scientific workflows. It is logically organized in three main components: an intuitive and compact Data Definition Language (DAS DDL) in XML format, aimed for user-defined data types; an Application Programming Interface (DAS API), automatically adding classes and methods supporting the DDL data types, and providing an object-oriented query language; a data management component, which maps the metadata of the DDL data types in a relational Data Base Management Syste...

Frailis, Marco; Zacchei, Andrea; Lodi, Marcello; Cirami, Roberto; Pasian, Fabio; Trifoglio, Massimo; Bulgarelli, Andrea; Gianotti, Fulvio; Franceschi, Enrico; Nicastro, Luciano; Conforti, Vito; Zoli, Andrea; Smart, Ricky; Morbidelli, Roberto; Dadina, Mauro

2014-01-01T23:59:59.000Z

367

Cold Vacuum Drying facility HVAC system design description (SYS 30-1 THRU 30-5)  

SciTech Connect (OSTI)

This document describes the Cold Vacuum Drying Facility (CVDF) heating, ventilation, and air conditioning system (HVAC). The CVDF HVAC system consists of the Administrative building HVAC system, the process bay recirculation HVAC system, the process bay local HVAC and process vent system, the process general supply/exhaust HVAC system, and the Reference air system. These HVAC sub-systems support the CVDF process and provide secondary confinement of contamination and the required filtration of exhaust.

PITKOFF, C.C.

1999-07-02T23:59:59.000Z

368

Standard Data Exchanges for Distribution System Management  

SciTech Connect (OSTI)

Databases and software tools for electric power distribution systems have not been integrated, and this leads to extra costs and restrictions imposed on utilities and other stakeholders. For example, distributed resource integration studies and modern grid technology assessments are more difficult and costly. New vendors face high market entry barriers, because it’s necessary to interface with large and customized data systems at each potential utility customer. This project promotes data and software tool integration, through a set of data translators based on a common object model. The data translators are delivered as open-source software, using appropriate Web software technologies. The parties who benefit include electric utilities (and their ratepayers), researchers at government laboratories and universities, small software companies wishing to enter the electric utility market, and parties wishing to interconnect distributed generation to a utility system.

Thomas E. McDermott

2007-10-05T23:59:59.000Z

369

Federal Emergency Management Information System (FEMIS). Data Management Guide, FEMIS: Phase 1, Version 1.1u  

SciTech Connect (OSTI)

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and analysis tool that is being developed under the direction of the U.S. Army Chemical and Biological Defense Command. The FEMIS Data Management Guide provides the background, as well as the operations and procedures needed to generate and maintain the data resources in the system.

Burnett, R.A.; Johnson, D.M.; Johnson, S.M. [and others

1995-06-01T23:59:59.000Z

370

Managing Manure with Biogas Recovery Systems  

E-Print Network [OSTI]

such as natural gas, propane, and fuel oil. Biogas can also be flared to control odor if energy recovery: a digester, a gas-handling system, a gas-use device, and a manure storage tank or pond to hold the treat- ed.g., storage tanks, storage ponds, lagoons). These benefits include odor control, improved air and water

Mukhtar, Saqib

371

Project W-211, initial tank retrieval systems, description of operations for 241-AP-102 and 241-AP-104  

SciTech Connect (OSTI)

The primary purpose of the Initial Tank Retrieval Systems (ITRS) is to provide systems for retrieval of radioactive wastes stored in underground double-shell tanks (DSTS) for transfer to alternate storage, evaporation, pretreatment or treatment, while concurrently reducing risks associated with safety watch list and other DSTs. This Description of Operations (DOO) defines the control philosophy for the waste retrieval system for tanks 241-AP-102 (AP-102) and 241-AP-104 (AP-104). This DOO will provide a basis for the detailed design of the Retrieval Control System (RCS) for AP-102 and AP-104 and establishes test criteria for the RCS. The test criteria will be used during qualification testing and acceptance testing to verify operability.

RIECK, C.A.

1999-02-25T23:59:59.000Z

372

Subsurface materials management and containment system  

DOE Patents [OSTI]

Systems, components, and methods relating to subterranean containment barriers. Laterally adjacent tubular casings having male interlock structures and multiple female interlock structures defining recesses for receiving a male interlock structure are used to create subterranean barriers for containing and treating buried waste and its effluents. The multiple female interlock structures enable the barriers to be varied around subsurface objects and to form barrier sidewalls. The barrier may be used for treating and monitoring a zone of interest.

Nickelson, Reva A.; Richardson, John G.; Kostelnik, Kevin M.; Sloan, Paul A.

2006-10-17T23:59:59.000Z

373

Subsurface materials management and containment system  

DOE Patents [OSTI]

Systems, components, and methods relating to subterranean containment barriers. Laterally adjacent tubular casings having male interlock structures and multiple female interlock structures defining recesses for receiving a male interlock structure are used to create subterranean barriers for containing and treating buried waste and its effluents. The multiple female interlock structures enable the barriers to be varied around subsurface objects and to form barrier sidewalls. The barrier may be used for treating and monitoring a zone of interest.

Nickelson, Reva A.; Richardson, John G.; Kosteinik, Kevin M.; Sloan, Paul A.

2004-07-06T23:59:59.000Z

374

Spent Fuel Test-Climax: technical measurements data management system description and data presentation  

SciTech Connect (OSTI)

The Spent Fuel Test-Climax (SFT-C) was located 420 m below surface in the Climax Stock granite on the Nevada Test Site. The test was conducted under the technical direction of the Lawrence Livermore National Laboratory (LLNL) as part of the Nevada Nuclear Waste Storage Investigations (NNWSI) for the US Department of Energy. Eleven canisters of spent nuclear reactor fuel were emplaced, along with six electrical simulators, in April-May 1980. The spent fuel canisters were retrieved and the electrical simulators de-energized in March-April 1983. During the test, just over 1000 MW-hr of thermal energy was deposited in the site, causing temperature changes 100{sup 0}C near the canisters, and about 5{sup 0} in the tunnels. More than 900 channels of geotechnical, seismological, and test status data were recorded on nearly continuous basis for about 3-1/2 years, ending in September 1983. Most geotechnical instrumentation was known to be temperature sensitive, and thus would require temperature compensation before interpretation. Accordingly, a 10-in. reel of digital tape was off-loaded and shipped to Livermore every 4 to 8 weeks, where the data were verified, organized into 45 one-million-word files, and temperature corrected. The purpose of this report is to document the receipt and processing of the data by LLNL Livermore personnel, present facts about the history of the instruments which may be important to the interpretation of the data, present the data themselves in graphical form for each instrument over its operating lifetime, document the forms and locations in which the data will be archived, and offer the data to the geotechnical community for future use in understanding and predicting the effects of the storage of heat-generating waste in hard rocks such as granite.

Carlson, R.C.

1985-08-01T23:59:59.000Z

375

Defense Nuclear Material Stewardship Integrated Inventory Information Management System (IIIMS).  

SciTech Connect (OSTI)

Sandia National Laboratories was tasked with developing the Defense Nuclear Material Stewardship Integrated Inventory Information Management System (IIIMS) with the sponsorship of NA-125.3 and the concurrence of DOE/NNSA field and area offices. The purpose of IIIMS was to modernize nuclear materials management information systems at the enterprise level. Projects over the course of several years attempted to spearhead this modernization. The scope of IIIMS was broken into broad enterprise-oriented materials management and materials forecasting. The IIIMS prototype was developed to allow multiple participating user groups to explore nuclear material requirements and needs in detail. The purpose of material forecasting was to determine nuclear material availability over a 10 to 15 year period in light of the dynamic nature of nuclear materials management. Formal DOE Directives (requirements) were needed to direct IIIMS efforts but were never issued and the project has been halted. When restarted, duplicating or re-engineering the activities from 1999 to 2003 is unnecessary, and in fact future initiatives can build on previous work. IIIMS requirements should be structured to provide high confidence that discrepancies are detected, and classified information is not divulged. Enterprise-wide materials management systems maintained by the military can be used as overall models to base IIIMS implementation concepts upon.

Aas, Christopher A.; Lenhart, James E.; Bray, Olin H.; Witcher, Christina Jenkin

2004-11-01T23:59:59.000Z

376

Master Document located at: W:\\fas\\fas-Quality Management System\\Quality Management System\\01 Quality System\\02 WORK INSTRUCTIONS\\3700-3899 Facilities Coordination\\3729 Lecturn (Creme) Operation with JED Controllers.doc  

E-Print Network [OSTI]

Master Document located at: W:\\fas\\fas-Quality Management System\\Quality Management System\\01 the following instructions. #12;Master Document located at: W:\\fas\\fas-Quality Management System\\Quality Management System\\01 Quality System\\02 WORK INSTRUCTIONS\\3700-3899 Facilities Coordination\\3729 Lecturn

377

Master Document located at: W:\\fas\\fas-Quality Management System\\Quality Management System\\01 Quality System\\02 WORK INSTRUCTIONS\\3700-3899 Facilities Coordination\\3735 LG Plasma Televisions.doc  

E-Print Network [OSTI]

Master Document located at: W:\\fas\\fas-Quality Management System\\Quality Management System\\01 for this process to complete. #12;Master Document located at: W:\\fas\\fas-Quality Management System\\Quality Management System\\01 Quality System\\02 WORK INSTRUCTIONS\\3700-3899 Facilities Coordination\\3735 LG Plasma

378

Environmental Management Systems | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power SystemsResources DOEElectricalonJustice Environmental Justice Selected documentsandServices

379

Environmental Management Systems | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power SystemsResources DOEElectricalonJustice Environmental Justice Selected

380

Chemical Management Contacts  

Broader source: Energy.gov [DOE]

Contacts for additional information on Chemical Management and brief description on Energy Facility Contractors Group

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

SDAMS: SPOrt Data Archiving and Management System  

E-Print Network [OSTI]

SDAMS is the ensemble of database + software packages aimed to the archiving, quick-look analysis, off-line analysis, network accessibility and plotting of the SPOrt produced data. Many of the aspects related to data archiving, analysis and distribution are common to almost all the astronomical experiments. SDAMS ambition is to face and solve problems like accessibility and portability of the data on any hardware/software platform in a way as simpler as possible, though effective. The system is conceived in a way to be used either by the scientific community interested in background radiation studies or by a wider public with low or null knowledge of the subject. The user authentication system allows us to apply different levels of access, analysis and data retrieving. SDAMS will be accessible through any Web browser though the most efficient way to use it is by writing simple programs. Graphics and images useful for outreach purposes will be produced and put on the Web on a regular basis.

L. Nicastro; G. Calderone; for the SPOrt collaboration

2002-01-14T23:59:59.000Z

382

MAS 10.1 Implementation of the Integrated Safety Management System...  

Broader source: Energy.gov (indexed) [DOE]

MAS 10.1 Implementation of the Integrated Safety Management System (ISMS) Process in Maintenance Activities, 2142000 MAS 10.1 Implementation of the Integrated Safety Management...

383

Federal Emergency Management Information System (FEMIS) system administration guide. Version 1.3  

SciTech Connect (OSTI)

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and analysis tool that was developed by the (Pacific Northwest National Laboratory) (PNNL) under the direction of the U.S. Army Chemical Biological Defense Command. The FEMIS System Administration Guide defines FEMIS hardware and software requirements and gives instructions for installing the FEMIS software package. 91 This document also contains information on the following: software installation for the FEMIS data servers, communication server, mail server, and the emergency management workstations; distribution media loading and FEMIS installation validation and troubleshooting; and system management of FEMIS users, login, privileges, and usage. The system administration utilities (tools), available in the FEMIS client software, are described for user accounts and site profile. This document also describes the installation and use of system and database administration utilities that will assist in keeping the FEMIS system running in an operational environment.

Burford, M.J.; Burnett, R.A.; Downing, T.R. [and others

1996-12-01T23:59:59.000Z

384

The Bachelor of Management degree in Management Information Systems is a minimum of 40 courses in length. Admission to the Faculty may occur at the end of Year One. Students are required to have the following courses for  

E-Print Network [OSTI]

The Bachelor of Management degree in Management Information Systems is a minimum of 40 courses ManagementInformationSystems Name: __________________________________________________________ ID 4840 - Systems Analysis Management 4841 - Systems Design One of: Management 3380 - Technological Change

Seldin, Jonathan P.

385

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect (OSTI)

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

386

DISTRIBUTED SYSTEMS MANAGEMENT AS A GROUP ACTIVITY Graham Dean, Tom Rodden, Ian Sommerville and David Hutchison  

E-Print Network [OSTI]

DISTRIBUTED SYSTEMS MANAGEMENT AS A GROUP ACTIVITY Graham Dean, Tom Rodden, Ian Sommerville@comp.lancs.ac.uk It is important to consider systems management as part of a whole organisational management strategy and, as such within the terms of reference associated with systems management. INTRODUCTION Traditionally, network

Sommerville, Ian

387

Servicebased Systems Management: Using CORBA as a Middleware for Intelligent Agents  

E-Print Network [OSTI]

Service­based Systems Management: Using CORBA as a Middleware for Intelligent Agents NM M TEAM Systems: Operations & Management, L'Aquila, Italy, October 1996 Abstract Management of large in the field of network and systems management. This paper analyses the suitability of CORBA for integrated

388

2001, HCS Research Lab. All Rights Reserved. Achieving Scalable Cluster System Analysis and Management  

E-Print Network [OSTI]

-based cluster system analysis and management. Among these services is the ability to detect network and node for distributed computing integrated into a cluster management system. Previous approaches to cluster management in a non-proprietary fashion. This cluster management system employs gossip techniques to address

George, Alan D.

389

Computerized management report system for monitoring manpower and cost  

SciTech Connect (OSTI)

Although most cost systems offer complete detail and traceability, not all provide timely detail in a concise form useful to senior management. This system was developed for a multifunction research organization funded from many sources. It extracts cost and manpower data from the general cost systems, summarizes it, compares it by program with previous cost periods, and presents it with minimum detail yet with maximum overview. The system monitors the basic manpower distribution of effort at the source, that is, the division time-card input. Cost data are taken from the central computer ahead of the print-out and report-distribution steps; thus, the summary information is available several days ahead of the detailed reports. This procedure has been regularly used for several months, and has proven to be a valuable tool in management action and planning. 9 figures.

Bullington, V.R.; Stephenson, R.L.; Cardwell, R.G.

1980-04-01T23:59:59.000Z

390

SOLAR IRRADIANCE FORECASTING FOR THE MANAGEMENT OF SOLAR ENERGY SYSTEMS  

E-Print Network [OSTI]

SOLAR IRRADIANCE FORECASTING FOR THE MANAGEMENT OF SOLAR ENERGY SYSTEMS Detlev Heinemann Oldenburg.girodo@uni-oldenburg.de ABSTRACT Solar energy is expected to contribute major shares of the future global energy supply. Due to its and solar energy conversion processes has to account for this behaviour in respective operating strategies

Heinemann, Detlev

391

Aviation Safety + Security Program GLOBAL EXPERTS IN SAFETY MANAGEMENT SYSTEMS  

E-Print Network [OSTI]

2011- 2012 Aviation Safety + Security Program GLOBAL EXPERTS IN SAFETY MANAGEMENT SYSTEMS of aviation safety. Endings signal new beginnings and new beginnings mean evolving challenges for safety. This was the world in which the USC Aviation Safety and Security Program was born in 1952 and this is the world

Wang, Hai

392

Environmental Management System 2 2005 Site environmental report2-  

E-Print Network [OSTI]

Environmental Management System 2 2005 Site environmental report2- One of Brookhaven National Laboratory's highest priorities is ensuring that its environmental performance measures up to its world of DOE, takes environmental stewardship very seriously. As part of BSA's commitment to environmentally

393

Nuclear Materials Management and Safeguards System Reporting and Data Submission  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The manual provides clear and detailed instructions and procedures for documenting and reporting data submissions for nuclear materials transactions, inventories, and material balances to the Nuclear Materials Management and Safeguards System (NMMSS). Cancels DOE 5633.3B. Canceled by DOE M 474.1-2A.

1998-02-10T23:59:59.000Z

394

RECOMMENDATIONS FOR EFFECTIVE SEPTIC SYSTEM MANAGEMENT IN THE  

E-Print Network [OSTI]

stated that, "properly managed [and sited] decentralized wastewater systems can provide the treatment were historically rural with many small communities but few large cities. Due to their close proximity of the wastewater forms the middle layer, called clarified sewage (or liquid effluent). Solids in the tank undergo

Rosemond, Amy Daum

395

Aurora: A Data Stream Management System , D. Carney  

E-Print Network [OSTI]

Aurora: A Data Stream Management System D. Abadi , D. Carney§ , U. �etintemel§ , M. Cherniack , C activity, and processing them for purposes of filtering, aggregation, reduction, and correlation. Aurora [1 OF AURORA Aurora is being designed to deal with large numbers of asynchronous, push-based data streams

Tatbul, Nesime

396

DECISION SUPPORT SYSTEM FOR MANAGEMENT OF WATER SOURCES  

E-Print Network [OSTI]

DECISION SUPPORT SYSTEM FOR MANAGEMENT OF WATER SOURCES Nejc Trdin1, 2 , Marko Bohanec1 , Mitja.bohanec}@ijs.si, mitja.janza@geo-zs.si ABSTRACT Meeting the quality criteria for drinking water is one of the areas which of data collected while monitoring water adequacy, an expert carries a large burden and also his decisions

Bohanec, Marko

397

Mercury and Freon: Temperature Emulation and Management for Server Systems  

E-Print Network [OSTI]

Mercury and Freon: Temperature Emulation and Management for Server Systems Taliver Heath Dept by simulators and real measurements. In this paper, we introduce Mercury, a soft- ware suite that avoids data. Most importantly, Mercury runs the entire software stack natively, enables repeatable experiments

Bianchini, Ricardo

398

Department of Management Science and Information Systems Seminar  

E-Print Network [OSTI]

Department of Management Science and Information Systems Seminar You are cordially invited, to provide a methodology for generating the conditional price-transition probabilities, as required's eBay store. We are using a model where each period there is a probability a price-transition occurs

Lin, Xiaodong

399

STATISTICAL DESCRIPTION OF THE  

E-Print Network [OSTI]

STATISTICAL DESCRIPTION OF THE CHIRIKOV-TAYLOR MODEL IN THE PRESENCE OF NOISE A. B. RECHESTER that the presence of noise makes the statistical description of this system unique. Theform of the diffusion, and statistical averaging, performed ana- lytically with thepath-integral method, are the same. Some

Karney, Charles

400

Martin Marietta Energy Systems, Inc., Groundwater Program Management Plan  

SciTech Connect (OSTI)

The purpose of the Martin Marietta Energy Systems, Inc., (Energy Systems) Groundwater Program Management Plan is to define the function, organizational structure (including associated matrix organizations), interfaces, roles and responsibilities, authority, and relationship to the Department of Energy for the Energy Systems Groundwater Program Office (GWPO). GWPO is charged with the responsibility of coordinating all components of the groundwater program for Energy Systems. This mandate includes activities at the three Oak Ridge facilities [Oak Ridge National Laboratory, the Oak Ridge Y-12 Plant, and the Oak Ridge K-25 Site], as well as the Paducah and Portsmouth Gaseous Diffusion Plants.

Early, T.O.

1994-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Energy management systems for commercial buildings. Final report  

SciTech Connect (OSTI)

Increasing costs of energy and the development of lower cost microelectronics have created a growing market for energy management systems applied to commercial buildings. This report examines the spectrum of EMS available and how they are used in different types of commercial buildings. An informal survey of 197 commercial building owners provided additional information on EMS installed and the energy savings attributed to those systems. Evaluations were performed to identify types of EMS appropriate to specific types of commercial buildings.

Woody, A.W.

1986-02-01T23:59:59.000Z

402

An expert system for PWR core operation management  

SciTech Connect (OSTI)

Planning for restartup after planned or unplanned reactor shutdown and load-follow operations is an important task in the core operation management of pressurized water reactors (PWRs). These planning problems have been solved by planning experts using their expertise and the computational prediction of core behavior. Therefore, the quality of the plan and the time consumed in the planning depend heavily on the skillfulness of the planning experts. A knowledge engineering approach has been recently considered as a promising means to solve such complicated planning problems. Many knowledge-based systems have been developed so far, and some of them have already been applied because of their effectiveness. The expert system REPLEX has been developed to aid core management engineers in making a successful plan for the restartup or the load-follow operation of PWRs within a shorter time. It can maintain planning tasks at a high-quality level independent of the skillfulness of core management engineers and enhance the efficiency of management. REPLEX has an explanation function that helps user understanding of plans. It could be a useful took, therefore, for the training of core management engineers.

Ida, Toshio; Masuda, Masahiro; Nishioka, Hiromasa

1988-01-01T23:59:59.000Z

403

Automated Transportation Management System (ATMS) Software Project Management Plan (SPMP). Revision 2  

SciTech Connect (OSTI)

As a cabinet level federal agency with a diverse range of missions and an infrastructure spanning the United States, the US Department of Energy (DOE) has extensive freight transportation requirements. Performance and management of this freight activity is a critical function. DOE`s Transportation Management Division (TMD) has an agency-wide responsibility for overseeing transportation activities. Actual transportation operations are handled by government or contractor staff at the field locations. These staff have evolved a diverse range of techniques and procedures for performing transportation functions. In addition to minimizing the economic impact of transportation on programs, facility transportation staff must be concerned with the increasingly complex task of complying with complex shipment safety regulations. Maintaining the department`s safety record for shipping hazardous and radioactive materials is a primary goal. Use of automation to aid transportation functions is not widespread within DOE, though TMD has a number of software systems designed to gather and analyze data pertaining to field transportation activities. These systems are not integrated. Historically, most field facilities have accomplished transportation-related tasks manually or with minimal computer assistance. At best, information and decision support systems available to transportation staffs within the facilities are fragmented. In deciding where to allocate resources for automation, facility managers have not tended to give the needs of transportation departments a high priority. This diversity causes TMD significant difficulty in collecting data for use in managing department-wide transportation activities.

Weidert, R.S.

1995-05-26T23:59:59.000Z

404

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: BUILDING MECHANIC II (Pay, parking lots, elevators, snow conditions, HVAC equipment temperature control systems, pool systems, ice

405

MANAGEMENT INFORMATION SYSTEMS (MIS) In a technology bound society, companies rely on  

E-Print Network [OSTI]

to the $44,000 Clay Barton Scholarship. Admission When you choose to major in Management Information Systems business, management, marketing, operations management, and personal selling. The W. Frank Barton School

406

Cold Vacuum Drying facility fire protection system design description (SYS 24)  

SciTech Connect (OSTI)

This document describes the Cold Vacuum Drying Facility (CVDF) fire protection system (FPS). The FPS provides fire detection, suppression, and loss limitation for the CVDF structure, personnel, and in-process spent nuclear fuel. The system provides, along with supporting interfacing systems, detection, alarm, and activation instrumentation and controls, distributive piping system, isolation valves, and materials and controls to limit combustibles and the associated fire loadings.

PITKOFF, C.C.

1999-07-06T23:59:59.000Z

407

Sandia National Laboratories, California Environmental Management System Program Manual.  

SciTech Connect (OSTI)

The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services Environmental programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New Mexico (SNL/NM). Although these groups, from an organizational perspective, are part of Division 8000, they are managed locally and fall under the environmental requirements specific to their New Mexico location. The New Mexico groups in Division 8000 follow the corporate EMS Program for New Mexico operations.

Not Available

2009-04-01T23:59:59.000Z

408

Sandia National Laboratories, California Environmental Management System program manual.  

SciTech Connect (OSTI)

The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 436.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site first received ISO 14001 certification in September 2006 and recertification in 2009. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy and Water Resource Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New Mexico (SNL/NM). Although these groups, from an organizational perspective, are part of Division 8000, they are managed locally and fall under the environmental requirements specific to their New Mexico location. The New Mexico groups in Division 8000 follow the corporate EMS Program for New Mexico operations.

Larsen, Barbara L.

2012-03-01T23:59:59.000Z

409

Sandia National Laboratories, California Environmental Management System Program Manual.  

SciTech Connect (OSTI)

The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New Mexico (SNL/NM). Although these groups, from an organizational perspective, are part of Division 8000, they are managed locally and fall under the environmental requirements specific to their New Mexico location. The New Mexico groups in Division 8000 follow the corporate EMS Program for New Mexico operations.

Larsen, Barbara L.

2011-04-01T23:59:59.000Z

410

Spanish high level radioactive waste management system issues  

SciTech Connect (OSTI)

The Empresa Nacional de Residuous Radiactivos, S.A. (ENRESA) was set up in 1984 as a state-owned limited liability company to be responsible for the management of all kinds of radioactive wastes in Spain. This paper provides an overview of the strategy and main lines of action stated in the third General Radioactive Waste Plan, currently in force, for the management of spent nuclear fuel and high-level wastes, as well as an outline of the main related projects, either being developed or foreseen. Aspects concerning the organizational structure, the economic and financing system and the international co-operational are also included.

Ulibarri, A.; Veganzones, A. [ENRESA, Madrid (Spain)

1993-12-31T23:59:59.000Z

411

glideinWMS - A generic pilot-based Workload Management System  

SciTech Connect (OSTI)

The Grid resources are distributed among hundreds of independent Grid sites, requiring a higher level Workload Management System (WMS) to be used efficiently. Pilot jobs have been used for this purpose by many communities, bringing increased reliability, global fair share and just in time resource matching. GlideinWMS is a WMS based on the Condor glidein concept, i.e. a regular Condor pool, with the Condor daemons (startds) being started by pilot jobs, and real jobs being vanilla, standard or MPI universe jobs. The glideinWMS is composed of a set of Glidein Factories, handling the submission of pilot jobs to a set of Grid sites, and a set of VO Frontends, requesting pilot submission based on the status of user jobs. This paper contains the structural overview of glideinWMS as well as a detailed description of the current implementation and the current scalability limits.

Sfiligoi, Igor; /Fermilab

2007-09-01T23:59:59.000Z

412

Post-Retrocommissioning HVAC Operations Monitoring Using Enterprise-Wide energy Management System  

E-Print Network [OSTI]

Post-retrocommissioning HVAC Operations Monitoring Using Enterprise-wide Energy Management System Narendra Amarnani Project Manager Brian Roberts Section Manager County of Los Angeles – ISD Los Angeles, California, USA Howard Choy... earned a graduate degree from Cal Poly University, Pomona. He is a Certified Energy Manager, a LEED® AP, and a Certified Energy Plan Examiner. Brian’s is the Section Manager of the Systems Section within Energy Management Division. His...

Amarnani, N.; Roberts, B.; Choy, H.

2007-01-01T23:59:59.000Z

413

FLEXIBILITY IN WATER RESOURCES MANAGEMENT: REVIEW OF CONCEPTS AND DEVELOPMENT OF ASSESSMENT MEASURES FOR FLOOD MANAGEMENT SYSTEMS1  

E-Print Network [OSTI]

FLEXIBILITY IN WATER RESOURCES MANAGEMENT: REVIEW OF CONCEPTS AND DEVELOPMENT OF ASSESSMENT variability/change; risk assessment; flood management; water resources flexibility.) DiFrancesco, Kara N of Assessment Measures for Flood Management Systems. Journal of the American Water Resources Association (JAWRA

Tullos, Desiree

414

Missing Data Handling for Meter Data Management System Ru-Sen Jeng1  

E-Print Network [OSTI]

Missing Data Handling for Meter Data Management System Ru-Sen Jeng1 , Chien-Yu Kuo1 , Yao-hua Ho1, Academia Sinica ABSTRACT We study the meter data management systems (MDMS) with a fo- cus on missing data meter data manage- ment systems. Categories and Subject Descriptors H.4.2 [Information Systems

Chen, Ling-Jyh

415

System Support for Software Fault Tolerance in Highly Available Database Management Systems  

E-Print Network [OSTI]

of several techniques for early error detection and fast recovery in a database management system (DBMS system and the IMS DBMS and DB2 DBMS. The study classifies errors by the type of coding mistake system allow the DBMS to guard (write-protect) #12;2 some of its internal data structures. Guarding DBMS

California at Irvine, University of

416

Science Expo 2014: Brief Activity Descriptions Earth Systems and Geology Activities  

E-Print Network [OSTI]

this process. 5. Birdseed Mining: Students "mine" for beads and seeds within a birdseed mixture to learn about models demonstrate the magnetic field, paired with Tahoe Institute for Natural Science activity on birds seasons. 30. Pocket Solar System: Students create a scale model of the solar system with a meter of paper

Schladow, S. Geoffrey

417

Description and operating procedure for magma characterization data acquisition and control system  

SciTech Connect (OSTI)

A computerized data acquisition and control system used in a Sandia National Laboratories' facility for molten rock (magma) and metallurgical pressure bonding experiments is described. The system is based on a Hewlett-Packard 9826A Desktop Computer and a Hewlett-Packard 3497A Data Acquisition/Control Unit. Operating procedures are included, and detailed instructions for implementing the procedures are given.

Woodward, M H

1982-04-01T23:59:59.000Z

418

Security Requirements for Management Systems using Mobile Agents H. Reiser G. Vogt  

E-Print Network [OSTI]

Security Requirements for Management Systems using Mobile Agents H. Reiser G. Vogt Munich Network Management Team Munich Network Management Team University of Munich, Germany Munich University of Technology and distributed management systems based on mobile agents have certain advantages over centralized and static

419

Metadata Modeling for Quality of Service Management in Distributed Multimedia Systems1  

E-Print Network [OSTI]

Metadata Modeling for Quality of Service Management in Distributed Multimedia Systems1 Brigitte information delivery. For that purpose, Quality of Service (QoS) management appears as an essential function of a system database that stores and manages the metadata required for QoS management. We have created

von Bochmann, Gregor

420

Energy management system functions in deregulated power systems  

E-Print Network [OSTI]

covariance matrix 8: E(uwr) = 8 = 0 0 . . cr This means that the measurement errors are independent with variances o;. As mentioned before, measurements are composed of power injections, power flows, and voltages. Vector h(z, ) represents the non linear..., nonetheless LAV reject INJ 4 if this injection measurement contains a bad data with 5 incident flows measurements. For INJ 10 in the 30-bus system, the cut oR' value is 16. 01 and again 24 Table II. IEEE 57-bus system: Variation of PS for INJ 13...

Magnago, Fernando Hugo

1997-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Probabilistic description of extreme events in intermittently unstable systems excited by correlated stochastic processes  

E-Print Network [OSTI]

In this work, we consider systems that are subjected to intermittent instabilities due to external stochastic excitation. These intermittent instabilities, though rare, have a large impact on the probabilistic response of the system and give rise to heavy-tailed probability distributions. By making appropriate assumptions on the form of these instabilities, which are valid for a broad range of systems, we formulate a method for the analytical approximation of the probability distribution function (pdf) of the system response (both the main probability mass and the heavy-tail structure). In particular, this method relies on conditioning the probability density of the response on the occurrence of an instability and the separate analysis of the two states of the system, the unstable and stable state. In the stable regime we employ steady state assumptions, which lead to the derivation of the conditional response pdf using standard methods for random dynamical systems. The unstable regime is inherently transient and in order to analyze this regime we characterize the statistics under the assumption of an exponential growth phase and a subsequent decay phase until the system is brought back to the stable attractor. The method we present allows us to capture the statistics associated with the dynamics that give rise to heavy-tails in the system response and the analytical approximations compare favorably with direct Monte Carlo simulations, which we illustrate for two prototype intermittent systems: an intermittently unstable mechanical oscillator excited by correlated multiplicative noise and a complex mode in a turbulent signal with fixed frequency, where multiplicative stochastic damping and additive noise model interactions between various modes.

Mustafa A. Mohamad; Themistoklis P. Sapsis

2014-10-13T23:59:59.000Z

422

Cold Vacuum Drying (CVD) Facility General Service Helium System Design Description  

SciTech Connect (OSTI)

This document describes the Cold Vacuum Drying Facility general service helium system (GSHe). The GSHe is a general service facility process support system, but does include safety-class systems, structures and components providing protection to the offsite public. The GSHe also performs safety-significant functions that provide protection to onsite workers. The GSHe essential function is to provide helium to support process functions during all phases of facility operations. GSHe helium is used to purge the cask and the MCO in order to maintain their internal atmospheres below hydrogen flammability concentrations. The GSHe also supplies helium to purge the PWC lines and components and the VPS vacuum pump.

FARWICK, C.C.

1999-07-06T23:59:59.000Z

423

MIT Integrated Global System Model (IGSM) Version 2: Model Description and Baseline Evaluation  

E-Print Network [OSTI]

The MIT Integrated Global System Model (IGSM) is designed for analyzing the global environmental changes that may result from anthropogenic causes, quantifying the uncertainties associated with the projected changes, and ...

Sokolov, Andrei P.

424

SWS 5182: Earth System Analysis Catalogue Description: Analysis of global-scale interdependences between climate, biogeochemical  

E-Print Network [OSTI]

System Model Carbon sequestration and climate mitigation potential of vegetation and soils 12 - 13 Earth fuel 11 Terrestrial biogeochemistry Chapter 5 and Chapter 6 Account for land carbon cycle in your Earth

Ma, Lena

425

Description of the Earth system model of intermediate complexity LOVECLIM version 1.2  

E-Print Network [OSTI]

The main characteristics of the new version 1.2 of the three-dimensional Earth system model of intermediate complexity LOVECLIM are briefly described. LOVECLIM 1.2 includes representations of the atmosphere, the ocean and ...

Goosse, H.

426

Description and analysis of the shrimp raceway run for the summer 1990, Shrimp Mariculture Project, Texas A&M University System  

E-Print Network [OSTI]

DESCRIPTION AND ANALYSIS OF THE SHRIMP RACEWAY RUN FOR THE SUMMER 1990, SHRIMP MARICULTURE PROJECT, TEXAS A&M UNIVERSITY SYSTEM Internship Report by Luis Mena Submitted to the Department of Wildlife and Fisheries Sciences Texas A...&M University in partial fulfillment of the requirements for the degree of MASTER OF AGRICULTURE May 1991 Major Subject: Fisheries Sciences DESCRIPTION AND ANALYSIS OF THE SHRIMP RACEWAY RUN FOR THE SUMMER 1990, SHRIMP MARICULTURE PROJECT, TEXAS A...

Mena, Luis

1991-01-01T23:59:59.000Z

427

Energy implications of integrated solid waste management systems. Final report  

SciTech Connect (OSTI)

This study develops estimates of energy use and recovery from managing municipal solid waste (MSW) under various collection, processing, and disposal scenarios. We estimate use and recovery -- or energy balance -- resulting from MSW management activities such as waste collection, transport, processing, and disposal, as well as indirect use and recovery linked to secondary materials manufacturing using recycled materials. In our analysis, secondary materials manufacturing displaces virgin materials manufacturing for 13 representative products. Energy implications are expressed as coefficients that measure the net energy saving (or use) of displacing products made from virgin versus recycled materials. Using data developed for the 1992 New York City Master Plan as a starting point, we apply our method to an analysis of various collection systems and 30 types of facilities to illustrate bow energy balances shift as management systems are modified. In sum, all four scenarios show a positive energy balance indicating the energy and advantage of integrated systems versus reliance on one or few technology options. That is, energy produced or saved exceeds the energy used to operate the solid waste system. The largest energy use impacts are attributable to processing, including materials separation and composting. Collection and transportation energy are relatively minor contributors. The largest two contributors to net energy savings are waste combustion and energy saved by processing recycled versus virgin materials. An accompanying spatial analysis methodology allocates energy use and recovery to New York City, New York State outside the city, the U.S., and outside the U.S. Our analytical approach is embodied in a spreadsheet model that can be used by energy and solid waste analysts to estimate impacts of management scenarios at the state and substate level.

Little, R.E.; McClain, G.; Becker, M.; Ligon, P.; Shapiro, K.

1994-07-01T23:59:59.000Z

428

Development of the RFID System for nuclear materials management.  

SciTech Connect (OSTI)

Radio frequency identification (RFID) is one of today's most rapidly growing technologies in the automatic data collection industry. Although commercial applications are already widespread, the use of this technology for managing nuclear materials is only in its infancy. Employing an RFID system has the potential to offer an immense payback: enhanced safety and security, reduced need for manned surveillance, real-time access to status and event history data, and overall cost-effectiveness. The Packaging Certification Program (PCP) in the U.S. Department of Energy's (DOE's) Office of Environmental Management (EM), Office of Packaging and Transportation (EM-63), is developing an RFID system for nuclear materials management. The system consists of battery-powered RFID tags with onboard sensors and memories, a reader network, application software, a database server and web pages. The tags monitor and record critical parameters, including the status of seals, movement of objects, and environmental conditions of the nuclear material packages in real time. They also provide instant warnings or alarms when preset thresholds for the sensors are exceeded. The information collected by the readers is transmitted to a dedicated central database server that can be accessed by authorized users across the DOE complex via a secured network. The onboard memory of the tags allows the materials manifest and event history data to reside with the packages throughout their life cycles in storage, transportation, and disposal. Data security is currently based on Advanced Encryption Standard-256. The software provides easy-to-use graphical interfaces that allow access to all vital information once the security and privilege requirements are met. An innovative scheme has been developed for managing batteries in service for more than 10 years without needing to be changed. A miniature onboard dosimeter is being developed for applications that require radiation surveillance. A field demonstration of the RFID system was recently conducted to assess its performance. The preliminary results of the demonstration are reported in this paper.

Chen, K.; Tsai, H.; Liu, Y. Y. (Decision and Information Sciences)

2008-01-01T23:59:59.000Z

429

International Border Management Systems (IBMS) Program : visions and strategies.  

SciTech Connect (OSTI)

Sandia National Laboratories (SNL), International Border Management Systems (IBMS) Program is working to establish a long-term border security strategy with United States Central Command (CENTCOM). Efforts are being made to synthesize border security capabilities and technologies maintained at the Laboratories, and coordinate with subject matter expertise from both the New Mexico and California offices. The vision for SNL is to provide science and technology support for international projects and engagements on border security.

McDaniel, Michael; Mohagheghi, Amir Hossein

2011-02-01T23:59:59.000Z

430

The Industrial Power Plant Management System - An Engineering Approach  

E-Print Network [OSTI]

THE INDUSTRIAL POWER PLANT MANAGEMENT SYSTEM AN ENGINEERING APPROACH Seppo E. Aarnio, Heikki J. Tarvainen and Valentin Tinnis EKONO Oy, Helsinki, Finland EKONO Inc., Bellevue, Washington ABSTRACT Based on energy studies in over 70 plants... in Finland. The results of the optimization calculations are used for two types of operations guidance. The first duty of the operators is to adjust the determined set points for the most economic loading, fuel firing and purchasing of power. This is done...

Aarnio, S. E.; Tarvainen, H. J.; Tinnis, V.

1979-01-01T23:59:59.000Z

431

A Data and Knowledge Management System for Intelligent Buildings  

E-Print Network [OSTI]

words: Intelligent building; Assessment; Methodology; Information system 1. INTRODUCTION It is the development and application of modern technologies in the areas of information, communication, materials, and machinery in the construction... of IBs, while facilities managers may hold operation information of IBs. In fact, it may take much effort to retrieve useful information for specified purposes such as IB assessment from various sources if there is not an information pervasive...

Hong, J.; Chen, Z.; Li, H.; Xu, Q.

2006-01-01T23:59:59.000Z

432

Deep Drilling Basic Research: Volume 4 - System Description. Final Report, November 1988--August 1990  

SciTech Connect (OSTI)

The first section of this Volume will discuss the ''Conventional Drilling System''. Today's complex arrangement of numerous interacting systems has slowly evolved from the very simple cable tool rigs used in the late 1800s. Improvements to the conventional drilling rig have varied in size and impact over the years, but the majority of them have been evolutionary modifications. Each individual change or improvement of this type does not have significant impact on drilling efficiency and economics. However, the change is almost certain to succeed, and over time--as the number of evolutionary changes to the system begin to add up--improvements in efficiency and economics can be seen. Some modifications, defined and described in this Volume as Advanced Modifications, have more than just an evolutionary effect on the conventional drilling system. Although the distinction is subtle, there are several examples of incorporated advancements that have had significantly more impact on drilling procedures than would a truly evolutionary improvement. An example of an advanced modification occurred in the late 1970s with the introduction of Polycrystalline Diamond Compact (PDC) drill bits. PDC bits resulted in a fundamental advancement in drilling procedures that could not have been accomplished by an evolutionary improvement in materials metallurgy, for example. The last drilling techniques discussed in this Volume are the ''Novel Drilling Systems''. The extent to which some of these systems have been developed varies from actually being tested in the field, to being no more than a theoretical concept. However, they all have one thing in common--their methods of rock destruction are fundamentally different from conventional drilling techniques. When a novel drilling system is introduced, it is a revolutionary modification of accepted drilling procedures and will completely replace current techniques. The most prominent example of a revolutionary modification in recent history was the complete displacement of cable tool rigs by rotary drilling rigs in the late 1920s.

Anderson, E.E.; Maurer, W.C.; Hood, M.; Cooper, G.; Cook, N.

1990-06-01T23:59:59.000Z

433

Rucio, the next-generation Data Management system in ATLAS  

E-Print Network [OSTI]

Rucio is the next-generation of Distributed Data Management (DDM) system benefiting from recent advances in cloud and "Big Data" computing to address HEP experiments scaling requirements. Rucio is an evolution of the ATLAS DDM system Don Quijote 2 (DQ2), which has demonstrated very large scale data management capabilities with more than 160 petabytes spread worldwide across 130 sites, and accesses from 1,000 active users. However, DQ2 is reaching its limits in terms of scalability, requiring a large number of support staff to operate and being hard to extend with new technologies. Rucio addresses these issues by relying on new technologies to ensure system scalability, cover new user requirements and employ new automation framework to reduce operational overheads. In this talk, we will present the history of the DDM project and the experience of data management operation in ATLAS computing. Thus, We will show the key concepts of Rucio, including its data organization. The Rucio design, and the technology it e...

Serfon, C; The ATLAS collaboration; Beermann, T; Garonne, V; Goossens, L; Lassnig, M; Nairz, A; Vigne, R

2014-01-01T23:59:59.000Z

434

Free Air CO2 Enrichment (FACE) Data Management System  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The DOE Biological and Environmental Research Program (BER) is responsible for four "core" FACE sites and projects. These are known as Aspen FACE, Duke FACE, ORNL FACE, and Nevada Deseret FACE. Brookhaven provides operational support to some of these sites, while The FACE Data Management System at ORNL and CDIAC serves as a data repository. In addition, DOE supports OTC experiments in conjunction with the Smithsonian Environmental Research Center (SERC) in Maryland and Florida. There are also FACE experiments ongoing in other countries. [Quoted from the home page of the FACE Data Management System and other pages within the web site.] The FACE Data Management System at ORNL provides links to all the FACE and SERC sites and to the data (both the data archived at CDIAC and data still residing on site-specific pages). Users are also given in-depth information on the concept, provided with a full, linked list of international projects, and guided to related research. The FACE projects were part of the CO2 research network fostered by the Global Change and Terrestrial Ecosystems core project of the International Geosphere-Biosphere Programme. Results from the experiment contribute to the Terrestrial Ecosystem Response to Atmospheric and Climatic Change (TERACC) project, a 5-year initiative integrating experimental data and global change modeling.

435

U-201: HP System Management Homepage Bugs Let Remote Users Deny...  

Broader source: Energy.gov (indexed) [DOE]

01: HP System Management Homepage Bugs Let Remote Users Deny Service U-201: HP System Management Homepage Bugs Let Remote Users Deny Service June 28, 2012 - 7:00am Addthis PROBLEM:...

436

Intrinsic irreversibility and the validity of the kinetic description of chaotic systems  

SciTech Connect (OSTI)

Irreversibility for a class of chaotic systems is seen to be an exact consequence of the dynamics through the use of a generalized spectral representation of the time evolution operator of probability densities. The generalized representation is valid for one-dimensional systems when the initial probability density satisfies certain physical conditions'' of smoothness. The formalism is first applied to the one-dimensional multi-Bernoulli map, which is a simple map displaying deterministic diffusion. The two-dimensional, invertible baker and multibaker transformations are then studied and the physical conditions determining which discrete spectral values are realized are seen to depend on the smoothness of both the density as well as the observable considered. The generalized representation is constructed using a resolvent formalism. The eigenstates of the diffusive systems are seen to be of a fractal nature.

Hasegawa, H.H.; Driebe, D.J. (Center for Studies in Statistical Mechanics and Complex Systems, University of Texas at Austin, Austin, Texas 78712 (United States) International Solvay Institutes for Physics and Chemistry, 1050 Brussels (Belgium))

1994-09-01T23:59:59.000Z

437

Management of Imported Fire Ants in Cattle Production Systems  

E-Print Network [OSTI]

This publication can help ranch managers develop integrated pest management plans for managing fire ant problems in cattle operations. It covers the specifics of managing fire ants in hay pastures and rangelands, around farm ponds, and near...

Fuchs, Thomas W.; Drees, Bastiaan M.

2004-03-31T23:59:59.000Z

438

Trends in Energy Management Technology - Part 4: Review ofAdvanced Applications in Energy Management, Control, and InformationSystems  

SciTech Connect (OSTI)

In this article, the fourth in a series, we provide a review of advanced applications in Energy Management, Control, and Information Systems (EMCIS). The available features for these products are summarized and analyzed with regard to emerging trends in EMCIS and potential benefits to the Federal sector. The first article [1] covered enabling technologies for emerging energy management systems. The second article [2] serves as a basic reference for building control system (BCS) networking fundamentals and includes an assessment of current approaches to open communications. The third article [3] evaluated several products that exemplify the current state of practice in EMCIS. It is important for energy managers in the Federal sector to have a high level of knowledge and understanding of these complex energy management systems. This series of articles provides energy practitioners with some basic informational and educational tools to help make decisions relative to energy management systems design, specification, procurement, and energy savings potential.

Yee, Gaymond; Webster, Tom

2003-08-01T23:59:59.000Z

439

Project L-070, ``300 Area process sewer piping system upgrade`` Project Management Plan  

SciTech Connect (OSTI)

This document is the project management plan for Project L-070, 300 Area process sewer system upgrades.

Wellsfry, H.E.

1994-09-16T23:59:59.000Z

440

U-205: RSA Access Manager Session Replay Flaw Lets Remote Users Access the System  

Broader source: Energy.gov [DOE]

A vulnerability was reported in RSA Access Manager. A remote user can gain access to the target system.

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

The University of Edinburgh System Description for IWSLT 2007 Josh Schroeder, Philipp Koehn  

E-Print Network [OSTI]

of Informatics University of Edinburgh 2 Buccleuch Place, Edinburgh EH8 9LW Scotland, United Kingdom j.schroeder@ed.ac.uk, pkoehn@inf.ed.ac.uk Abstract We present the University of Edinburgh's submission for the IWSLT 2007 track, and present additional results of our experiments using the open-source Moses MT system

Edinburgh, University of

442

Biology and management of insect pests in North American intensively managed hardwood forest systems.  

SciTech Connect (OSTI)

Annu. Rev. Entomol. 50:1-29. Abstract Increasing demand for wood and wood products is putting stress on traditional forest production areas, leading to long-term economic and environmental concerns. Intensively managed hardwood forest systems (IMHFS), grown using conventional agricultural as well as forestry methods, can help alleviate potential problems in natural forest production areas. Although IMHFS can produce more biomass per hectare per year than natural forests, the ecologically simplified, monocultural systems may greatly increase the crops susceptibility to pests. Species in the genera Populus and Salix comprise the greatest acreage in IMHFS in North America, but other species, including Liquidambar styracifua and Platanus occidentalis, are also important. We discuss life histories, realized and potential damage, and management options for the most economically infuential pests that affect these hardwood species. The substantial inherent challenges associated with pest management in the monocultural environments created by IMHFS are reviewed. Finally, we discuss ways to design IMHFS that may reduce their susceptibility to pests, increase their growth and productivity potential, and create a more sustainable environment.

Coyle, David R.; Nebeker, T., E.; Hart, E., R.; Mattson, W., J.

2005-01-01T23:59:59.000Z

443

Towards a Self-Adaptive Data Management System for Cloud Environments Alexandra Carpen-Amarie  

E-Print Network [OSTI]

Towards a Self-Adaptive Data Management System for Cloud Environments Alexandra Carpen-Amarie INRIA is efficient and reliable data management. More specifically, storage systems intended for very large scales efficient data- management system, they also imply a high degree of complexity in the configuration

Paris-Sud XI, Université de

444

Minor in Agricultural Systems Management The Department of Biological and Agricultural Engineering  

E-Print Network [OSTI]

Minor in Agricultural Systems Management Offered by The Department of Biological and Agricultural Engineering College of Agriculture and Life Sciences The minor in Agricultural Systems Management is available systems management. The courses listed below constitute the 18 hours required for a minor in Agricultural

445

Impact of Virtualization on Management Systems Sven Graupner, Ralf Knig, Vijay Machiraju, Jim Pruyne,  

E-Print Network [OSTI]

Impact of Virtualization on Management Systems Sven Graupner, Ralf König, Vijay Machiraju, Jim HPL-2003-125 June 23rd , 2003* E-mail: {firstname.lastname}@hp.com virtualization, system management into enterprise IT infrastructures and will have impact on management systems. In this paper we review some

Newcastle upon Tyne, University of

446

A TMN system for VPC and routing management in ATM networks  

E-Print Network [OSTI]

A TMN system for VPC and routing management in ATM networks D. P. Griffin Institute of Computer, these parameters and subsequently the routes based on them can be configured on-line by a management system and Routing management system is required to take advantage of the features of VPCs while ensuring

Griffin, David

447

Service-based Systems Management: Using CORBA as a Middleware for Intelligent Agents  

E-Print Network [OSTI]

Service-based Systems Management: Using CORBA as a Middleware for Intelligent Agents NMM TEAM@informatik.uni-muenchen.de Proceedings of the IFIP/IEEE International Workshop on Distributed Systems: Operations & Management, L (CORBA) which is gaining increasing impor- tance in the field of network and systems management

448

Systems Management with Distributed Objects: Porting SNMP Agents to a CORBA Environment  

E-Print Network [OSTI]

Systems Management with Distributed Objects: Porting SNMP Agents to a CORBA Environment NMM TEAM systems as well. It is therefore important to supply CORBA- compliant agents which enable the management of these systems in an efficient manner. Currently, this is not the case: while no such CORBA-compliant management

449

Towards an Integrated Planning and Adaptive Resource Management Architecture for Distributed Real-time Embedded Systems  

E-Print Network [OSTI]

conditions change. Key challenges in managing open DRE systems in- clude effective planning and online management of system resources to accommodate for changing mission goals, en- vironmental conditions- source management to control and ensure efficient function- ing of open DRE systems. 1 Introduction

Koutsoukos, Xenofon D.

450

Systems Management with Distributed Objects: Porting SNMP Agents to a CORBA Environment  

E-Print Network [OSTI]

Systems Management with Distributed Objects: Porting SNMP Agents to a CORBA Environment NM M TEAM the management of these systems in an efficient manner. Currently, this is not the case: while no such CORBA. Keywords: CORBA, Distributed Objects, Distributed Systems Management, Middleware 1 Introduction

451

MANAGING THE CONFIGURATION OF INFORMATION SYSTEMS WITH A FOCUS ON SECURITY  

E-Print Network [OSTI]

a well-defined process for managing and controlling secure system configurations, and for managing risks, and the integration of security into the configuration management process throughout the life cycle of the system for establishing secure configurations in information systems; flow charts for SecCM processes and activities

452

National Ignition Facility Cryogenic Target Systems Interim Management Plan  

SciTech Connect (OSTI)

Restricted availability of funding has had an adverse impact, unforeseen at the time of the original decision to projectize the National Ignition Facility (NIF) Cryogenic Target Handling Systems (NCTS) Program, on the planning and initiation of these efforts. The purpose of this document is to provide an interim project management plan describing the organizational structure and management processes currently in place for NCTS. Preparation of a Program Execution Plan (PEP) for NCTS has been initiated, and a current draft is provided as Attachment 1 to this document. The National Ignition Facility is a multi-megajoule laser facility being constructed at Lawrence Livermore National Laboratory (LLNL) by the National Nuclear Security Administration (NNSA) in the Department of Energy (DOE). Its primary mission is to support the Stockpile Stewardship Program (SSP) by performing experiments studying weapons physics, including fusion ignition. NIF also supports the missions of weapons effects, inertial fusion energy, and basic science in high-energy-density physics. NIF will be operated by LLNL under contract to the University of California (UC) as a national user facility. NIF is a low-hazard, radiological facility, and its operation will meet all applicable federal, state, and local Environmental Safety & Health (ES&H) requirements. The NCTS Interim Management Plan provides a summary of primary design criteria and functional requirements, current organizational structure, tracking and reporting procedures, and current planning estimates of project scope, cost, and schedule. The NIF Director controls the NIF Cryogenic Target Systems Interim Management Plan. Overall scope content and execution schedules for the High Energy Density Physics Campaign (SSP Campaign 10) are currently undergoing rebaselining and will be brought into alignment with resources expected to be available throughout the NNSA Future Years National Security Plan (FYNSP). The revised schedule for delivering this system will be decided at the national level, based on experiment campaign requirement dates that will be derived through this process. The current milestone date for achieving indirect-drive ignition on the NIF is December 2010. Maintaining this milestone requires that the cryogenic systems be complete and available for fielding experiments early enough that the planned experimental campaigns leading up to ignition can be carried out. The capability of performing non-ignition cryogenic experiments is currently required by March 2006, when the NIF's first cluster of beams is operational. Plans for cryogenic and non-cryogenic experiments on the NIF are contained in NNSA's Campaign 10 Program Plans for Ignition (MTE 10.1) and High Energy Density Sciences (MTE 10.2). As described in this document, the NCTS Program Manager is responsible for managing NIF Cryogenic Target Systems development, engineering, and deployment. Through the NIF Director, the NCTS Program Manager will put in place an appropriate Program Execution Plan (draft attached) at a later time consistent with the maturing and funding these efforts. The PEP will describe management methods for carrying out these activities.

Warner, B

2002-04-25T23:59:59.000Z

453

LCA comparison of container systems in municipal solid waste management  

SciTech Connect (OSTI)

The planning and design of integrated municipal solid waste management (MSWM) systems requires accurate environmental impact evaluation of the systems and their components. This research assessed, quantified and compared the environmental impact of the first stage of the most used MSW container systems. The comparison was based on factors such as the volume of the containers, from small bins of 60-80 l to containers of 2400 l, and on the manufactured materials, steel and high-density polyethylene (HDPE). Also, some parameters such as frequency of collections, waste generation, filling percentage and waste container contents, were established to obtain comparable systems. The methodological framework of the analysis was the life cycle assessment (LCA), and the impact assessment method was based on CML 2 baseline 2000. Results indicated that, for the same volume, the collection systems that use HDPE waste containers had more of an impact than those using steel waste containers, in terms of abiotic depletion, global warming, ozone layer depletion, acidification, eutrophication, photochemical oxidation, human toxicity and terrestrial ecotoxicity. Besides, the collection systems using small HDPE bins (60 l or 80 l) had most impact while systems using big steel containers (2400 l) had less impact. Subsequent sensitivity analysis about the parameters established demonstrated that they could change the ultimate environmental impact of each waste container collection system, but that the comparative relationship between systems was similar.

Rives, Jesus, E-mail: Jesus.Rives@uab.ca [SosteniPrA (UAB-IRTA), Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona - UAB, 08193 Bellaterra, Barcelona (Spain); Rieradevall, Joan; Gabarrell, Xavier [SosteniPrA (UAB-IRTA), Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona - UAB, 08193 Bellaterra, Barcelona (Spain); Department of Chemical Engineering, Universitat Autonoma de Barcelona - UAB, 08193 Bellaterra, Barcelona (Spain)

2010-06-15T23:59:59.000Z

454

Revised Burnup Code System SWAT: Description and Validation Using Postirradiation Examination Data  

SciTech Connect (OSTI)

The burnup code system Step-Wise Burnup Analysis Code System (SWAT) is revised for use in a burnup credit analysis. An important feature of the revised SWAT is that its functions are achieved by calling validated neutronics codes without any changes to the original codes. This feature is realized with a system function of the operating system, which allows the revised SWAT to be independent of the development status of each code.A package of the revised SWAT contains the latest libraries based on JENDL-3.2 and the second version of the JNDC FP library. These libraries allow us to analyze burnup problems, such as an analysis of postirradiation examination (PIE), using the latest evaluated data of not only cross sections but also fission yield and decay constants.Another function of the revised SWAT is a library generator for the ORIGEN2 code, which is one of the most reliable burnup codes. ORIGEN2 users can obtain almost the same results with the revised SWAT using the library prepared by this function.The validation of the revised SWAT is conducted by calculation of the Organization for Economic Cooperation and Development/Nuclear Energy Agency burnup credit criticality safety benchmark Phase I-B and analyses of PIE data for spent fuel from Takahama Unit 3. The analysis of PIE data shows that the revised SWAT can predict the isotopic composition of main uranium and plutonium with a deviation of 5% from experimental results taken from UO{sub 2} fuels of 17 x 17 fuel assemblies. Many results of fission products including samarium are within a deviation of 10%. This means that the revised SWAT has high reliability to predict the isotopic composition for pressurized water reactor spent fuel.

Suyama, Kenya [Japan Atomic Energy Research Institute (Japan); Mochizuki, Hiroki [Japan Atomic Energy Research Institute (Japan); Kiyosumi, Takehide [Japan Research Institute, Ltd. (Japan)

2002-05-15T23:59:59.000Z

455

A Policy Management System for Ambient Networks K. Jean and A. Galis, {kjean, agalis}@ee.ucl.ac.uk,  

E-Print Network [OSTI]

A Policy Management System for Ambient Networks K. Jean and A. Galis, {kjean, agalis of Ambient Networks necessitate a new dynamic, distributed policy management system. Existing policy management systems do not provide the required support for mobility, dynamicity and heterogeneity

Haddadi, Hamed

456

Description of Atmospheric Conditions at the Pierre Auger Observatory using the Global Data Assimilation System (GDAS)  

SciTech Connect (OSTI)

Atmospheric conditions at the site of a cosmic ray observatory must be known for reconstructing observed extensive air showers. The Global Data Assimilation System (GDAS) is a global atmospheric model predicated on meteorological measurements and numerical weather predictions. GDAS provides altitude-dependent profiles of the main state variables of the atmosphere like temperature, pressure, and humidity. The original data and their application to the air shower reconstruction of the Pierre Auger Observatory are described. By comparisons with radiosonde and weather station measurements obtained on-site in Malargue and averaged monthly models, the utility of the GDAS data is shown.

Abreu, P.; /Lisbon, IST; Aglietta, M.; /Turin U. /INFN, Turin; Ahlers, M.; /Wisconsin U., Madison; Ahn, E.J.; /Fermilab; Albuquerque, I.F.M.; /Sao Paulo U.; Allard, D.; /APC, Paris; Allekotte, I.; /Buenos Aires, CONICET; Allen, J.; /New York U.; Allison, P.; /Ohio State U.; Almela, A.; /Natl. Tech. U., San Nicolas /Buenos Aires, CONICET; Alvarez Castillo, J.; /Mexico U., ICN /Santiago de Compostela U.

2012-01-01T23:59:59.000Z

457

A Scenario-based Predictive Control Approach to Building HVAC Management Systems  

E-Print Network [OSTI]

A Scenario-based Predictive Control Approach to Building HVAC Management Systems Alessandra Parisio and Air Conditioning (HVAC) systems while minimizing the overall energy use. The strategy uses

Johansson, Karl Henrik

458

GARS Directorate Environment, Safety, & Health Records/Documents Management  

E-Print Network [OSTI]

GARS Directorate Environment, Safety, & Health Records/Documents Management Rev. 6 4/24/13 Topic documentation for Environmental Management System (EMS) Program CONTROLLED DOCUMENT ENV-1.K.1 - Cut off annually. Occupational Health & Safety (OHSAS 18001) Management System Description (Manual) The written OSH program

Ohta, Shigemi

459

Description of a research reactor control system using a programmable controller  

SciTech Connect (OSTI)

This paper describes the design features, testing methods, and operational experience of a programmable controller (PC) installed as a neutron flux controller in the Oak Ridge Research Reactor (ORR) at Oak Ridge National Laboratory (ORNL). The PC was designed to control neutron flux from 1 to 105% for three selectable ranges. The PC generates a flux setpoint under operator control, calculates the reactor heat power from flow and temperature signals, calculates a neutron flux calibration factor based on the heat power, and positions a control rod based on the flux-setpoint difference. The programmable controller was tested by controlling an analog computer model of the ORR. The equipment was installed in August 1985, and except for some startup problems, the system has performed well.

Battle, R.E.

1986-01-01T23:59:59.000Z

460

Federal Emergency Management Information System (FEMIS) system administration guide. Version 1.4  

SciTech Connect (OSTI)

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and analysis tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the US Army Chemical Biological Defense Command. The FEMIS System Administration Guide defines FEMIS hardware and software requirements and gives instructions for installing the FEMIS software package. This document also contains information on the following: software installation for the FEMIS data servers, communication server, mail server, and the emergency management workstations; distribution media loading and FEMIS installation validation and troubleshooting; and system management of FEMIS users, login privileges, and usage. The system administration utilities (tools), available in the FEMIS client software, are described for user accounts and site profile. This document also describes the installation and use of system and database administration utilities that will assist in keeping the FEMIS system running in an operational environment. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are connected via a local area network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via telecommunications links.

Arp, J.A.; Burnett, R.A.; Downing, T.R. [and others] [and others

1997-11-21T23:59:59.000Z

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

System and method for acquisition management of subject position information  

DOE Patents [OSTI]

A system and method for acquisition management of subject position information that utilizes radio frequency identification (RF ID) to store position information in position tags. Tag programmers receive position information from external positioning systems, such as the Global Positioning System (GPS), from manual inputs, such as keypads, or other tag programmers. The tag programmers program each position tag with the received position information. Both the tag programmers and the position tags can be portable or fixed. Implementations include portable tag programmers and fixed position tags for subject position guidance, and portable tag programmers for collection sample labeling. Other implementations include fixed tag programmers and portable position tags for subject route recordation. Position tags can contain other associated information such as destination address of an affixed subject for subject routing.

Carrender, Curt (Morgan Hill, CA)

2007-01-23T23:59:59.000Z

462

A Policy Management System for Hybrid Networks N Vardalachos, J Rubio, A Galis and J Serrat  

E-Print Network [OSTI]

management architecture devised for management of IP over WDM networks and is part of the work carried outA Policy Management System for Hybrid Networks N Vardalachos, J Rubio, A Galis and J Serrat University College London, Universitat Politècnica de Catalunya Abstract: The management of heterogeneous

Haddadi, Hamed

463

Rucio, the next-generation Data Management system in ATLAS  

E-Print Network [OSTI]

Rucio is the next-generation of Distributed Data Management (DDM) system benefiting from recent advances in cloud and "Big Data" computing to address HEP experiments scaling requirements. Rucio is an evolution of the ATLAS DDM system Don Quijote 2 (DQ2), which has demonstrated very large scale data management capabilities with more than 160 petabytes spread worldwide across 130 sites, and accesses from 1,000 active users. However, DQ2 is reaching its limits in terms of scalability, requiring a large number of support staff to operate and being hard to extend with new technologies. Rucio addresses these issues by relying on new technologies to ensure system scalability, cover new user requirements and employ new automation framework to reduce operational overheads. This paper shows the key concepts of Rucio, details the Rucio design, and the technology it employs, the tests that were conducted to validate it and finally describes the migration steps that were conducted to move from DQ2 to Rucio.

Serfon, C; The ATLAS collaboration; Beermann, T; Garonne, V; Goossens, L; Lassnig, M; Nairz, A; Vigne, R

2014-01-01T23:59:59.000Z

464

Voices of Experience | Insights into Advanced Distribution Management Systems  

Broader source: Energy.gov [DOE]

The American Recovery and Reinvestment Act (ARRA) of 2009 spurred investments in smart grid technology and programs at utilities across the country. In 2011, the Office of Electricity Delivery and Energy Reliability (OE), in partnership with electric utilities that received ARRA funds, convened a series of Regional Smart Grid Peer-to-Peer Workshops. These were designed to bring together utilities to engage in dialogues about the most compelling smart grid topics in each region. In February 2014, OE formed the Advanced Distribution Management Systems (ADMS) Working Group by assembling a leadership team of representatives from the utility industry with the mission to collect the experiences, insights, and lessons learned from implementing these systems. This Voices of Experience | Insights into Advanced Distribution Management Systems report is the result of a one-day meeting held at CenterPoint Energy in Houston, Texas, in May 2014 that was followed by a series of conference calls about specific aspects of ADMS, interviews with individuals leading ADMS projects at their utilities, and a final small group meeting at San Diego Gas & Electric in California in October 2014.

465

The Bachelor of Management degree in Management Information Systems is a minimum of 40 courses in length. Admission to the Faculty may occur at the end of Year One. Students are required to have completed the following  

E-Print Network [OSTI]

The Bachelor of Management degree in Management Information Systems is a minimum of 40 courses completion of a recognized degree from an English-language university. BachelorofManagement ManagementInformationSystems 4090 - Management Policy and Strategy Management 4840 - Systems Analysis Management 4841 - Systems

Seldin, Jonathan P.

466

The electricity consumption impacts of commercial energy management systems  

SciTech Connect (OSTI)

An investigation of energy management systems (EMS) in large commercial and institutional buildings in North Carolina was undertaken to determine how EMS currently affect electricity consumption and what their potential is for being used to reduce on-peak electricity demand. A survey was mailed to 5000 commercial customers; the 430 responses were tabulated and analyzed; EMS vendors were interviewed, and 30 sites were investigated in detail. The detailed assessments included a site interview and reconstruction of historic billing data to evaluate EMS impact, if any. The results indicate that well-tuned EMS can result in a 10 to 40 percent reduction in billed demand, and smaller reductions in energy.

Buchanan, S.; Taylor, R.; Paulos, S.; Warren, W.; Hay, J.

1989-02-01T23:59:59.000Z

467

PIA - Foreign Travel Management System (FTMS) | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002OpticsPeriodical: Volume 5,PETPIV SystemTravel Management

468

Quantifying uncertainty in LCA-modelling of waste management systems  

SciTech Connect (OSTI)

Highlights: Black-Right-Pointing-Pointer Uncertainty in LCA-modelling of waste management is significant. Black-Right-Pointing-Pointer Model, scenario and parameter uncertainties contribute. Black-Right-Pointing-Pointer Sequential procedure for quantifying uncertainty is proposed. Black-Right-Pointing-Pointer Application of procedure is illustrated by a case-study. - Abstract: Uncertainty analysis in LCA studies has been subject to major progress over the last years. In the context of waste management, various methods have been implemented but a systematic method for uncertainty analysis of waste-LCA studies is lacking. The objective of this paper is (1) to present the sources of uncertainty specifically inherent to waste-LCA studies, (2) to select and apply several methods for uncertainty analysis and (3) to develop a general framework for quantitative uncertainty assessment of LCA of waste management systems. The suggested method is a sequence of four steps combining the selected methods: (Step 1) a sensitivity analysis evaluating the sensitivities of the results with respect to the input uncertainties, (Step 2) an uncertainty propagation providing appropriate tools for representing uncertainties and calculating the overall uncertainty of the model results, (Step 3) an uncertainty contribution analysis quantifying the contribution of each parameter uncertainty to the final uncertainty and (Step 4) as a new approach, a combined sensitivity analysis providing a visualisation of the shift in the ranking of different options due to variations of selected key parameters. This tiered approach optimises the resources available to LCA practitioners by only propagating the most influential uncertainties.

Clavreul, Julie, E-mail: julc@env.dtu.dk [Department of Environmental Engineering, Technical University of Denmark, Miljoevej, Building 113, DK-2800 Kongens Lyngby (Denmark); Guyonnet, Dominique [BRGM, ENAG BRGM-School, BP 6009, 3 Avenue C. Guillemin, 45060 Orleans Cedex (France); Christensen, Thomas H. [Department of Environmental Engineering, Technical University of Denmark, Miljoevej, Building 113, DK-2800 Kongens Lyngby (Denmark)

2012-12-15T23:59:59.000Z

469

Electronic document management system analysis report and system plan for the Environmental Restoration Program  

SciTech Connect (OSTI)

Lockheed Martin Energy Systems, Inc. (LMES) has established and maintains Document Management Centers (DMCs) to support Environmental Restoration Program (ER) activities undertaken at three Oak Ridge facilities: Oak Ridge National Laboratory, Oak Ridge K-25 Site, Oak Ridge Y-12 Plant; and two sister sites: Portsmouth Gaseous Diffusion Plant in Portsmouth, Ohio, and Paducah Gaseous Diffusion Plant in Paducah, Kentucky. The role of the DMCs is to receive, store, retrieve, and properly dispose of records. In an effort to make the DMCs run more efficiently and to more proactively manage the records` life cycles from cradle to grave, ER has decided to investigate ways in which Electronic Document Management System (EDMS) technologies can be used to redefine the DMCs and their related processes. Specific goals of this study are tightening control over the ER documents, establishing and enforcing record creation and retention procedures, speeding up access to information, and increasing the accessibility of information. A working pilot of the solution is desired within the next six months. Based on a series of interviews conducted with personnel from each of the DMCs, key management, and individuals representing related projects, it is recommended that ER utilize document management, full-text retrieval, and workflow technologies to improve and automate records management for the ER program. A phased approach to solution implementation is suggested starting with the deployment of an automated storage and retrieval system at Portsmouth. This should be followed with a roll out of the system to the other DMCs, the deployment of a workflow-enabled authoring system at Portsmouth, and a subsequent roll out of this authoring system to the other sites.

Frappaolo, C. [Delphi Consulting Group, Boston, MA (United States)

1995-09-01T23:59:59.000Z

470

Federal Emergency Management Information System (FEMIS) system administration guide, version 1.4.5  

SciTech Connect (OSTI)

The Federal Emergency Management Information Systems (FEMIS) is an emergency management planning and response tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the US Army Chemical Biological Defense Command. The FEMIS System Administration Guide provides information necessary for the system administrator to maintain the FEMIS system. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are connected via a local area network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via a Wide Area Network (WAN). Thus, FEMIS is an integrated software product that resides on client/server computer architecture. The main body of FEMIS software, referred to as the FEMIS Application Software, resides on the PC client(s) and is directly accessible to emergency management personnel. The remainder of the FEMIS software, referred to as the FEMIS Support Software, resides on the UNIX server. The Support Software provides the communication, data distribution, and notification functionality necessary to operate FEMIS in a networked, client/server environment. The UNIX server provides an Oracle relational database management system (RDBMS) services, ARC/INFO GIS (optional) capabilities, and basic file management services. PNNL developed utilities that reside on the server include the Notification Service, the Command Service that executes the evacuation model, and AutoRecovery. To operate FEMIS, the Application Software must have access to a site specific FEMIS emergency management database. Data that pertains to an individual EOC`s jurisdiction is stored on the EOC`s local server. Information that needs to be accessible to all EOCs is automatically distributed by the FEMIS database to the other EOCs at the site.

Arp, J.A.; Burnett, R.A.; Carter, R.J. [and others

1998-06-26T23:59:59.000Z

471

(Preliminary draft) Modeling Reputation Management System on Online C2C Market Modeling Reputation Management System on Online C2C Market  

E-Print Network [OSTI]

online transactions in a consumer-to-consumer (C2C) market. We developed a computer simulation model transactions. Keywords: Reputation Management System, C2C market, e-commerce, online market, Agent(Preliminary draft) Modeling Reputation Management System on Online C2C Market Modeling Reputation

Yamamoto, Hitoshi

472

An Efficient Energy Management System for Android Phone Using Bayesian Networks  

E-Print Network [OSTI]

An Efficient Energy Management System for Android Phone Using Bayesian Networks Young-Seol Lee, proximity, light and orientation sensors for context-awareness. Energy-efficient battery management systems, it becomes an issue to develop the techniques for efficient energy management on a mobile phone [2, 3, 4

Cho, Sung-Bae

473

Stochastic Modeling and Optimization for Robust Power Management in a Partially Observable System  

E-Print Network [OSTI]

or hard disk. The power management hardware/software monitors the state transition in the systemStochastic Modeling and Optimization for Robust Power Management in a Partially Observable System As the hardware and software complexity grows, it is unlikely for the power management hardware/software to have

Qiu, Qinru

474

Distrbuted Sensing Systems for Water Quality Assesment and Management  

E-Print Network [OSTI]

for environmental management, and in particular, waterenvironmental management efforts at the Environmental Protection Agency (EPA), with a special focus on water-

2007-01-01T23:59:59.000Z

475

DOE technology information management system database study report  

SciTech Connect (OSTI)

To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performed detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.

Widing, M.A.; Blodgett, D.W.; Braun, M.D.; Jusko, M.J.; Keisler, J.M.; Love, R.J.; Robinson, G.L. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.

1994-11-01T23:59:59.000Z

476

Transportation functions of the Civilian Radioactive Waste Management System  

SciTech Connect (OSTI)

Within the framework of Public Law 97.425 and provisions specified in the Code of Federal Regulations, Title 10 Part 961, the US Department of Energy has the responsibility to accept and transport spent fuel and high-level waste from various organizations which have entered into a contract with the federal government in a manner that protects the health and safety of the public and workers. In implementing these requirements, the Office of Civilian Radioactive Waste Management (OCRWM) has, among other things, supported the identification of functions that must be performed by a transportation system (TS) that will accept the waste for transport to a federal facility for storage and/or disposal. This document, through the application of system engineering principles, identifies the functions that must be performed to transport waste under this law.

Shappert, L.B. [ed.; Attaway, C.R.; Pope, R.B. [Oak Ridge National Lab., TN (United States); Best, R.E.; Danese, F.L. [Science Applications International Corp., Oak Ridge, TN (United States); Dixon, L.D. [Dixon (L.D.), Martinez, GA (United States); Jones, R.H. [Jones (R.H.), Los Gatos, CA (United States); Klimas, M.J. [USDOE Chicago Operations Office, Argonne, IL (United States); Peterson, R.W. [Bentz (E.J.) and Associates, Inc., Alexandria, VA (United States)

1992-03-01T23:59:59.000Z

477

Network QoS Management in Cyber-Physical Systems  

E-Print Network [OSTI]

Technical advances in ubiquitous sensing, embedded computing, and wireless communication are leading to a new generation of engineered systems called cyber-physical systems (CPS). CPS promises to transform the way we interact with the physical world just as the Internet transformed how we interact with one another. Before this vision becomes a reality, however, a large number of challenges have to be addressed. Network quality of service (QoS) management in this new realm is among those issues that deserve extensive research efforts. It is envisioned that wireless sensor/actuator networks (WSANs) will play an essential role in CPS. This paper examines the main characteristics of WSANs and the requirements of QoS provisioning in the context of cyber-physical computing. Several research topics and challenges are identified. As a sample solution, a feedback scheduling framework is proposed to tackle some of the identified challenges. A simple example is also presented that illustrates the effectiveness of the pr...

Xia, Feng; Dong, Jinxiang; Sun, Youxian

2008-01-01T23:59:59.000Z

478

System Description for the K-25/K-27 D&D Project Polyurethane Foam Delivery System, East Tennessee Technology Park, Oak Ridge, Tennessee  

SciTech Connect (OSTI)

The Foam Delivery System used in the decontamination and decommissioning (D&D) project for the K-25/K-27 Buildings at the East Tennessee Technology Park (ETTP) is comprised of a trailer-mounted Gusmer{reg_sign} H20/35 Pro-TEC Proportioning Unit and the associated equipment to convey electrical power, air, and foam component material to the unit. This high-pressure, plural-component polyurethane foam pouring system will be used to fill process gas and non-process equipment/piping (PGE/P) within the K-25/K-27 Buildings with polyurethane foam to immobilize contaminants prior to removal. The system creates foam by mixing isocyanate and polyol resin (Resin) component materials. Currently, the project plans to utilize up to six foaming units simultaneously during peak foaming activities. Also included in this system description are the foam component material storage containers that will be used for storage of the component material drums in a staging area outside of the K-25/K-27 Buildings. The Foam Delivery System and foam component material storage enclosures (i.e., Foaming Component Protective Enclosures) used to store polymeric methylene diphenyl diisocyanate (PMDI) component material are identified as Safety Significant (SS) Structures, Systems and Components (SSC) in the Documented Safety Analysis (DSA) for the project, Documented Safety Analysis for the K-25 and K-27 Facilities at the East Tennessee Technology Park, Oak Ridge, Tennessee, DSA-ET-K-25/K-27-0001.

Boris, G.

2008-02-21T23:59:59.000Z

479

Duke University/Health System Disability Management System, 402 Oregon Street, Box 90142, Telephone: (919) 668-6213 Fax: (919) 668-3977 TTY (919) 668-1329  

E-Print Network [OSTI]

Duke University/Health System Disability Management System, 402 Oregon Street, Box 90142, Telephone,000 ­ Send Accommodation Fund application to the Disability Management System at (919) 668-6213 or leigh be obtained through the Disability Management System, or downloaded from the Disability Management System

Oren, Ram

480

Evaluation of Object Placement Techniques in a PolicyManaged Storage System  

E-Print Network [OSTI]

Evaluation of Object Placement Techniques in a Policy­Managed Storage System Vijay Sundaram, Pawan Goyaly, Peter Radkov and Prashant Shenoy Department of Computer Science yStorage Systems Department@us.ibm.com Abstract In this paper, we consider a policy­managed storage system---a system that automates various

Massachusetts at Amherst, University of

Note: This page contains sample records for the topic "management system description" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Energy Management Strategy for Commercial Buildings Integrating PV and Storage Systems  

E-Print Network [OSTI]

Energy Management Strategy for Commercial Buildings Integrating PV and Storage Systems He ZHANG1 by using the solution proposed. Keywords: Photovoltaic (PV) systems, fuzzy logic, storage system, energy connected to the power network and associated to photovoltaic and storage system. Some energy management

Paris-Sud XI, Université de

482

Quality Management and Job Quality: How the ISO 9001 Standard forQuality Management Systems Affects Employees and Employers  

E-Print Network [OSTI]

M.J. , F.M. Veloso. 2008. ISO 9000 practices and financialon global standards: A 15-economy survey of ISO 9000and ISO 14000. ISO Management Systems (Jan-Feb). http://

Levine, David I.; Toffel, Michael W.

2008-01-01T23:59:59.000Z

483

Development of Energy Consumption Database Management System of Existing Large Public Buildings  

E-Print Network [OSTI]

The statistic data of energy consumption are the base of analyzing energy consumption. The scientific management method of energy consumption data and the development of database management system plays an important role in building energy...

Li, Y.; Zhang, J.; Sun, D.

2006-01-01T23:59:59.000Z

484

2-1 SITE ENVIRONMENTAL REPORT 2000 CHAPTER 2: ENVIRONMENTAL MANAGEMENT SYSTEM  

E-Print Network [OSTI]

the International Organization for Standardization ISO 14001 Standard, Environmental Management Systems conforms to the international standard on environmental management known as ISO 14001, with increased emphasis on compliance assurance, pollution prevention, and community outreach. Nine BNL organizations have

Homes, Christopher C.

485

ESD.36J / 1.432J System and Project Management, Fall 2003  

E-Print Network [OSTI]

The course is designed for students in the System Design and Management (SDM) program and therefore assumes that you already have a basic knowledge of project management. The objective is to introduce advanced methods and ...

Lyneis, James

486

Intern equivalency at the office of the program manager XM1 Tank systems: an internship report  

E-Print Network [OSTI]

-academic environment in which he will become aware of his employer's approach to the solution of problems, especially those of a non-technical nature. The author served in the Automotive Branch of the Systems Engineering Division and was the Program Manager... career, the author had spent three and one half years in the Automotive Branch of the Systems Engineering Division, Office of the Program Manager, XM1 Tank Systems (now Ml Tank Systems). During that period he was responsible for managing...

Root, Paul Michael, 1944-

2013-03-13T23:59:59.000Z

487

Energy Management System Lowers U.S. Navy Energy Costs Through PV System Interconnection (Fact Sheet)  

SciTech Connect (OSTI)

To meet the U.S. Navy's energy goals, the National Renewable Energy Laboratory (NREL) and the Naval Facilities Engineering Command (NAVFAC) spent two years collaborating on demonstrations that tested market-ready energy efficiency measures, renewable energy generation, and energy systems integration. One such technology - an energy management system - was identified as a promising method for reducing energy use and costs, and can contribute to increasing energy security.

Not Available

2014-04-01T23:59:59.000Z

488

Functional requirements for the Automated Transportation Management System: TTP number: RL 439002  

SciTech Connect (OSTI)

This requirements analysis, documents Department of Energy (DOE) transportation management procedures for the purpose of providing a clear and mutual understanding between users and designers of the proposed Automated Transportation Management System (ATMS). It is imperative that one understand precisely how DOE currently performs traffic management tasks; only then can an integrated system be proposed that successfully satisfies the major requirements of transportation managers and other system users. Accordingly, this report describes the current workings of DOE transportation organizations and then proposes a new system which represents a synthesis of procedures (both current and desired) which forms the basis for further systems development activities.

Portsmouth, J.H. [Westinghouse Hanford Co., Richland, WA (United States)

1992-12-31T23:59:59.000Z

489

System design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)  

SciTech Connect (OSTI)

This document describes the hardware subsystems of the data acquisition and control system (DACS) used in mitigation tests conducted on waste tank SY-101 at the Hanford Nuclear Reservation. The system was designed and implemented by Los Alamos National Laboratory (LANL) and supplied to Westinghouse Hanford Company (WHC). The mitigation testing uses a pump immersed in the waste tank, directed at certain angles and operated at different speeds and time durations. The SY-101 tank has experienced recurrent periodic gas releases of hydrogen, nitrous oxide, ammonia, and (recently discovered) methane. The hydrogen gas represents a danger, as some of the releases are in amounts above the lower flammability limit (LFL). These large gas releases must be mitigated. Several instruments have been added to the tank to monitor the gas compositions, the tank level, the tank temperature, and other parameters. A mixer pump has been developed to stir the tank waste to cause the gases to be released at a slow rate. It is the function of the DACS to monitor those instruments and to control the mixer pump in a safe manner. During FY93 and FY94 the mixer pump was installed with associated testing operations support equipment and a mitigation test project plan was implemented. These activities successfully demonstrated the mixer pump`s ability to mitigate the SY-101 tank hydrogen gas hazard.

Truitt, R.W. [Westinghouse Hanford Co., Richland, WA (United States); Pounds, T.S.; Smith, S.O. [EG and G Energy Measurements, Inc., Las Vegas, NV (United States)

1994-08-24T23:59:59.000Z

490

Stochastic Modeling of a Power-Managed System: Construction and Optimization Qinru Qiu, Qing Wu and Massoud Pedram  

E-Print Network [OSTI]

1 Stochastic Modeling of a Power-Managed System: Construction and Optimization Qinru Qiu, Qing Wu of a power-managed electronic system. We formulate the problem of system-level power management-digital components. Dynamic power management ­ which refers to selective shut-off or slow-down of system components

Qiu, Qinru

491

An ANFIS Based Sensor Network for a Residential Energy Management System D. Senthilkumar, S. Kumar, Y. Ozturk and G. Lee  

E-Print Network [OSTI]

An ANFIS Based Sensor Network for a Residential Energy Management System D. Senthilkumar, S. Kumar management system project, an Integrated and Cognitive Home Energy Management System for Demand Response (DR management system which addresses demand response with efficient energy consumption. 1. Introduction State

Kumar, Sunil

492

Towards an Integration of the Lean Enterprise System, Total Quality Management, Six Sigma and Related Enterprise Process Improvement Methods  

E-Print Network [OSTI]

The lean enterprise system, total quality management, six sigma, theory of constraints, agile manufacturing,

Bozdogan, Kirkor

2010-08-05T23:59:59.000Z

493

Business Process Modeling for developing Process Oriented IT Systems Track: Business Process Management Tools and Technologies  

E-Print Network [OSTI]

Business Process Modeling for developing Process Oriented IT Systems Track: Business Process should be like. Therefore, business process modeling becomes a pre-requisite for system requirements, the paradigm of Business Process Management contrasts with traditional information system development, which

Paris-Sud XI, Université de

494

INTEGRATED SAFETY MANAGEMENT SYSTEM SAFETY CULTURE IMPROVEMENT INITIATIVE  

SciTech Connect (OSTI)

In 2007, the Department of Energy (DOE) identified safety culture as one of their top Integrated Safety Management System (ISMS) related priorities. A team was formed to address this issue. The team identified a consensus set of safety culture principles, along with implementation practices that could be used by DOE, NNSA, and their contractors. Documented improvement tools were identified and communicated to contractors participating in a year long pilot project. After a year, lessons learned will be collected and a path forward determined. The goal of this effort was to achieve improved safety and mission performance through ISMS continuous improvement. The focus of ISMS improvement was safety culture improvement building on operating experience from similar industries such as the domestic and international commercial nuclear and chemical industry.

MCDONALD JA JR

2009-01-16T23:59:59.000Z

495

Federal Emergency Management Information System (FEMIS) System Administration Guide for FEMIS Version 1.4.6  

SciTech Connect (OSTI)

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and response tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the U.S. Army Chemical Biological Defense Command. The FEMIS System Administration Guide provides information necessary for the system administrator to maintain the FEMIS system. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are corrected via a local area network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via a Wide Area Network (WAN). Thus, FEMIS is an integrated software product that resides on client/server computer architecture. The main body of FEMIS software, referred to as the FEMIS Application Software, resides on the PC client(s) and is directly accessible to emergency management personnel. The remainder of the FEMIS software, referred to as the FEMIS Support Software, resides on the UNIX server. The Support Software provides the communication data distribution and notification functionality necessary to operate FEMIS in a networked, client/server environment.

Arp, J.A.; Bower, J.C.; Burnett, R.A.; Carter, R.J.; Downing, T.R.; Fangman, P.M.; Gerhardstein, L.H.; Homer, B.J.; Johnson, D.M.; Johnson, R.L.; Johnson, S.M.; Loveall, R.M.; Martin, T.J.; Millard, W.D.; Schulze, S.A.; Stoops, L.R.; Tzemos, S.; Wood, B.M.

1999-06-29T23:59:59.000Z

496

Thermal management of long-length HTS cable systems  

SciTech Connect (OSTI)

Projections of electric power production suggest a major shift to renewables, such as wind and solar, which will be in remote locations where massive quantities of power are available. One solution for transmitting this power over long distances to load centers is direct current (dc), high temperature superconducting (HTS) cables. Electric transmission via dc cables promises to be effective because of the low-loss, highcurrent- carrying capability of HTS wire at cryogenic temperatures. However, the thermal management system for the cable must be carefully designed to achieve reliable and energyefficient operation. Here we extend the analysis of a superconducting dc cable concept proposed by the Electric Power Research Institute (EPRI), which has one stream of liquid nitrogen flowing in a cryogenic enclosure that includes the power cable, and a separate return tube for the nitrogen. Refrigeration stations positioned every 10 to 20 km cool both nitrogen streams. Both go and return lines are contained in a single vacuum/cryogenic envelope. Other coolants, including gaseous helium and gaseous hydrogen, could provide potential advantages, though they bring some technical challenges to the operation of long-length HTS dc cable systems. A discussion of the heat produced in superconducting cables and a system to remove the heat are discussed. Also, an analysis of the use of various cryogenic fluids in long-distance HTS power cables is presented.

Demko, Jonathan A [ORNL; Hassenzahl, William V [ORNL

2011-01-01T23:59:59.000Z

497

Energy Management System for an Hybrid Electric Vehicle, Using Ultracapacitors and Neural Networks  

E-Print Network [OSTI]

Energy Management System for an Hybrid Electric Vehicle, Using Ultracapacitors and Neural Networks management system for hybrid electric vehicles (HEV), using neural networks (NN), was developed and tested. The system minimizes the energy requirement of the vehicle and can work with different primary power sources

Catholic University of Chile (Universidad Católica de Chile)

498

Sperry Low Temperature Geothermal Conversion System, Phase 1 and Phase II. Final report. Volume III. Systems description  

SciTech Connect (OSTI)

The major fraction of hydrothermal resources that have the prospect of being economically useful for the generation of electricity are in the 300/sup 0/F to 425/sup 0/F temperature range. Cost-effective conversion of the geothermal energy to electricity requires the conception and reduction to practice of new ideas to improve conversion efficiency, enhance brine flow, reduce plant costs, increase plant availability, and shorten the time between investment and return. The problems addressed during past activities are those inherent in the geothermal environment, in the binary fluid cycle, in the difficulty of efficiently converting the energy of a low-temperature resource, and in geothermal economics. Explained in detail in this document, some of these problems are: the energy expended by the down-hole pump; the difficulty in designing reliable down-hole equipment; fouling of heat-exchanger surfaces by geothermal fluids; the unavailability of condenser cooling water at most geothermal sites; the large portion of the available energy used by the feed pump in a binary system; the pinch effect - a loss in available energy in transferring heat from water to an organic fluid; flow losses in fluids that carry only a small amount of useful energy to begin with; high heat-exchanger costs - the lower the temperature interval of the cycle, the higher the heat exchanger costs in $/kW (actually, more than inversely proportional); the complexity and cost of the many auxiliary elements of proposed geothermal plants; and the unfortunate cash flow vs. investment curve caused by the many years of investment required to bring a field into production before any income is realized.

Matthews, H.B.

1984-01-01T23:59:59.000Z

499

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle description  

SciTech Connect (OSTI)

The Nonproliferation Alterntive Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates.

Not Available

1980-06-01T23:59:59.000Z

500

Stochastic Modeling and Optimization for Energy Management in Multi-Core Systems  

E-Print Network [OSTI]

1 Stochastic Modeling and Optimization for Energy Management in Multi-Core Systems: A Video and optimization framework which leads to effective energy management policies. At the heart of this framework lie to obtain optimal energy management policies. These policies minimize the average energy consumption using

Tasiran, Serdar