National Library of Energy BETA

Sample records for major cold war

  1. Cold War | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Cold War

  2. Major Cold War Cleanup Milestone Reached at the Savannah River Site |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cold War Cleanup Milestone Reached at the Savannah River Site Major Cold War Cleanup Milestone Reached at the Savannah River Site March 29, 2012 - 10:37am Addthis WASHINGTON, DC - Today, the Energy Department announced it has reached a major milestone in the Department's efforts to clean up the Cold War legacy at the Savannah River Site (SRS) in South Carolina, laying the groundwork for closing two underground storage tanks that previously held radioactive liquid waste

  3. The Department of Energy Announces Major Cold War Legacy Waste Cleanup

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Milestone | Department of Energy The Department of Energy Announces Major Cold War Legacy Waste Cleanup Milestone The Department of Energy Announces Major Cold War Legacy Waste Cleanup Milestone September 28, 2011 - 8:54am Addthis CARLSBAD, NM - The U.S. Department of Energy today announced that the Waste Isolation Pilot Plant (WIPP) received its 10,000th shipment of transuranic (TRU) waste over the weekend. This marks an important milestone in DOE's mission to clean up the country's Cold

  4. The Department of Energy Announces Major Cold War Legacy Waste Cleanup

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Milestone Media Contact: (208) 586-4940 For Immediate Release: September 28, 2011 The Department of Energy Announces Major Cold War Legacy Waste Cleanup Milestone Waste Isolation Pilot Plant Receives 10,000th Shipment CARLSBAD, NM - The U.S. Department of Energy today announced that the Waste Isolation Pilot Plant (WIPP) received its 10,000th shipment of transuranic (TRU) waste over the weekend. This marks an important milestone in DOE�s mission to clean up the country�s Cold War

  5. Sandia National Laboratories: Cold War Warriors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cold War Warriors By Sue Major Holmes Thursday, April 28, 2016 The story of Sandia's decades in nuclear field testing Sandia videographer and documentarian Myra Buteau has produced a tribute to the nation's Cold War warriors. To watch Cold War Warriors on YouTube, click on the image above. Sandia video producer Myra Buteau sweeps her hand toward the top shelf of a bookcase stuffed with black cases of high-definition tapes. The biggest challenge in telling the story of Sandia's years of work in

  6. DOE ACHIEVES MAJOR COLD WAR LEGACY WASTE CLEANUP MILESTONE: Waste Isolation Pilot Plant Receives 10,000th Shipment

    Broader source: Energy.gov [DOE]

    CARLSBAD, N.M. – The Waste Isolation Pilot Plant (WIPP) received its 10,000th shipment of transuranic (TRU) waste on Sept. 24, 2011. This marked an important milestone in the DOE Office of Environmental Management mission to clean up the country’s Cold War legacy.

  7. Linking Legacies: Connecting the Cold War Nuclear Weapons Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cold War Nuclear Weapons Production Processes to Their Environmental Consequences Linking Legacies: Connecting the Cold War Nuclear Weapons Production Processes to Their ...

  8. From the Cold War to the War on Cancer | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    From the Cold War to the War on Cancer | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation...

  9. The Cold War is over. What now?

    SciTech Connect (OSTI)

    Hecker, S.S.

    1995-05-01

    As you might imagine, the end of the Cold War has elicited an intense reexamination of the roles and missions of institutions such as the Los Alamos National Laboratory. During the past few years, the entire defense establishment has undergone substantial consolidation, with a concomitant decrease in support for research and development, including in areas such as materials. The defense industry is down-sizing at a rapid pace. Even universities have experienced significant funding cutbacks from the defense community. I view this as a profound time in history, bringing changes encompassing much more than just the defense world. In fact, support for science and technology is being reexamined across the board more completely than at any other time since the end of World War II.

  10. Laboratory's role in Cold War nuclear weapons testing program...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    70th anniversary lecture Laboratory's role in Cold War nuclear weapons testing program focus of next 70th anniversary lecture Lab's role in the development of nuclear weapons ...

  11. Y-12, the Cold War, and nuclear weapons dismantlement „ Or:...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Cold War, and nuclear weapons dismantlement - Or: The Cold War and nuclear weapons dismantlement (title used in The Oak Ridger) The Cold War heated up over the years with such ...

  12. US foreign policy and the CIA: A cold war retrospective

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    The document consists of three previously announced reports: The CIA under Truman: CIA Cold War Records (PB94-928005); The Cuban Missile Crisis, 1962 (PB92-927906); and Selected Estimates on the Soviet Union (PB93-928112).

  13. Manhattan Project: The Cold War, 1945-1990

    Office of Scientific and Technical Information (OSTI)

    West Berliner talks to the East, Berlin Wall, November 1962 THE COLD WAR (1945-1990) Events > Postscript -- The Nuclear Age, 1945-Present Informing the Public, August 1945 The Manhattan Engineer District, 1945-1946 First Steps toward International Control, 1944-1945 Search for a Policy on International Control, 1945 Negotiating International Control, 1945-1946 Civilian Control of Atomic Energy, 1945-1946 Operation Crossroads, July 1946 The VENONA Intercepts, 1946-1980 The Cold War, 1945-1990

  14. Linking Legacies: Connecting the Cold War Nuclear Weapons Production

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Processes to Their Environmental Consequences | Department of Energy Linking Legacies: Connecting the Cold War Nuclear Weapons Production Processes to Their Environmental Consequences Linking Legacies: Connecting the Cold War Nuclear Weapons Production Processes to Their Environmental Consequences This report described each step in the cycle of nuclear weapons production and defined for the first time a planned disposition path for all waste streams generated prior to 1992 as a result of

  15. Lab begins demolition of Cold War-era buildings

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Demolition begins of cold War-Era buildings Lab begins demolition of Cold War-era buildings More than 165,000 square feet of former research, production, and office buildings will be demolished. December 1, 2009 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National

  16. Deterrence, disarmament, and post-cold war stability: Enhancing security for both ``haves`` and ``have nots``

    SciTech Connect (OSTI)

    Lehman, R. F. II

    1995-04-01

    This paper examines possible developments in nuclear disarmament resulting from the end of the Cold War.

  17. SAVANNAH RIVER SITE COLD WAR HISTORIC PROPERTY DOCUMENTATION

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WAR HISTORIC PROPERTY DOCUMENTATION NARRATIVE AND PHOTOGRAPHY CMX AND TNX SAVANNAH RIVER'S PILOT PLANTS Aiken County, South Carolina SAVANNAH RIVER SITE COLD WAR HISTORIC PROPERTY DOCUMENTATION CMX AND TNX CMX AND TNX SA SA V V ANNAH RIVER'S ANNAH RIVER'S PILOT PLANTS PILOT PLANTS Aiken County, South Carolina NARRATIVE AND PHOTOGRAPHY ii ABSTRACT This documentation was prepared in accordance with a Memorandum of Agreement (MOA) signed by the Department of Energy-Savannah River (DOE-SR) and the

  18. Recovery Act funds advance cleanup efforts at Cold War site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cleanup efforts at Cold War site Recovery Act funds advance cleanup efforts at Cold War site A local small business, ARSEC Environmental, LLC, of White Rock, NM, won a $2 million task order in April to perform this work. June 29, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

  19. U. S. Department of Energy Savannah River Operations Office - SRS Cold War

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Historic Preservation SRS Cold War Historic Preservation SRS Cold War Historic Preservation Background on SRS Cold War Historic Preservation Background: The National Historic Preservation Act (NHPA) of 1966, as amended through 2000, requires that all Federal agencies consider the impacts to historic properties in all their undertakings, such as accelerated clean up. DOE-SR has been consulting with the South Carolina State Historic Preservation Office (SHPO) on NHPA. SHPO is the implementing

  20. Recovery Act Workers Accomplish Cleanup of Second Cold War Coal Ash Basin

    Broader source: Energy.gov [DOE]

    American Recovery and Reinvestment Act workers recently cleaned up a second basin containing coal ash residues from Cold War operations at the Savannah River Site (SRS).

  1. EM’s December Newsletter Recaps Cold War Cleanup Accomplishments in 2013

    Broader source: Energy.gov [DOE]

    On Dec. 19, EM completed demolition of the 4.8 million-square-foot Building K-25 at Oak Ridge, a milestone that capped a busy and successful 2013 for the Cold War cleanup program.

  2. Idaho Cold War Waste Removal Advancing as Work on Eighth Area...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Danielle Miller, (208) 569-7806 Erik Simpson, (208) 390-9464 For Immediate Release: January 13, 2014 Idaho Cold War Waste Removal Advancing as Work on Eighth Area Begins IDAHO...

  3. Idaho site completes demolition of Cold War-era nuclear fuel...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Joint News Release For Immediate Release Date: December 22, 2011 Media Contact: Erik Simpson, (208) 360-0426 Idaho site completes demolition of Cold War-era nuclear fuel...

  4. Idaho Site Completes Demolition of Cold War-era Nuclear Fuel Reprocessing Facility

    Broader source: Energy.gov [DOE]

    A gravel mound, larger than half a city block and several feet thick, is the only visible feature that remains at the site of a Cold War-era spent nuclear fuel reprocessing facility at the U.S....

  5. Laboratory's role in Cold War nuclear weapons testing program focus of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    next 70th anniversary lecture 70th anniversary lecture Laboratory's role in Cold War nuclear weapons testing program focus of next 70th anniversary lecture Lab's role in the development of nuclear weapons during the Cold War period will be discussed by Byron Ristvet of the Defense Threat Reduction Agency. September 5, 2013 This photograph captures the expanding fireball of the world's first full-scale hydrogen bomb test, Ivy-Mike, which was conducted Oct. 31, 1952. This photograph captures

  6. Cold War Films Yield New Effects-Data for U.S. Nuclear Weapons

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cold War Films Yield New Effects National Security Science Latest Issue:April 2016 past issues All Issues » submit Cold War Films Yield New Effects-Data for U.S. Nuclear Weapons The rush is on to save deteriorating atmospheric nuclear-testing films that give Department of Defense planners, emergency-preparedness officials, and weapons researchers irreplaceable hard data on the yield of nuclear weapons. Digitizing and reanalyzing these films is revealing surprises, causing weapons scientists and

  7. SAVANNAH RIVER SITE COLD WAR HISTORIC PROPERTY DOCUMENTATION

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WAR HISTORIC PROPERTY DOCUMENTATION 700/A AREA Aiken County, South Carolina 6150 East Ponce de Leon Avenue Stone Mountain, Georgia 30083 700/A AREA SITE ADMINISTRATION, SAFETY, SECURITY, AND SUPPORT NEW SOUTH ASSOCIATES ii ABSTRACT This documentation was prepared in accordance with a Memorandum of Agreement (MOA) signed by the Department of Energy-Savannah River (DOE-SR) and the South Carolina Historic Preservation Office (SHPO) dated February 17, 2004, as well as the Consolidated MOA of August

  8. Idaho Site’s Cold War Cleanup Takes Center Stage in Publication

    Broader source: Energy.gov [DOE]

    IDAHO FALLS, Idaho – An association with more than 29,000 members featured an in-depth article on EM’s extensive Cold War legacy cleanup at the Idaho site in the current issue of its publication, The Military Engineer.

  9. Bridging the Cold War and the 21st century: chronicling the history of Sandia National Laboratories

    SciTech Connect (OSTI)

    Mora, C.J.

    1997-04-01

    A historical perspective is given for Sandia National Laboratories from its beginnings as a small engineering group at an offshoot of Los Alamos Laboratory to a facility of 7000 people at its main facility in Albuquerque, another 1000 people in Livermore, California and test ranges in Tonopah, Nevada and Kauai, Hawaii. The Sandia army base became the Z division of Los Alamos and $25 million construction program began the structures that would carry out a test program for nuclear weapons during the cold war. Bell System/AT&T stewardship of the site continued from 1949 to 1993, when Martin Marietta (now Lockheed Martin) was chosen as the new contractor. Management decisions, personnel, and political aspects of the Laboratory are presented up to 1997 and forecasts are given for future policy and programs of Sandia.

  10. Linking legacies: Connecting the Cold War nuclear weapons production processes to their environmental consequences

    SciTech Connect (OSTI)

    1997-01-01

    In the aftermath of the Cold War, the US has begun addressing the environmental consequences of five decades of nuclear weapons production. In support of this effort, the National Defense Authorization Act for Fiscal Year 1995 directed the Department of Energy (DOE) to describe the waste streams generated during each step in the production of nuclear weapons. Accordingly, this report responds to this mandate, and it is the Department`s first comprehensive analysis of the sources of waste and contamination generated by the production of nuclear weapons. The report also contains information on the missions and functions of nuclear weapons facilities, on the inventories of waste and materials remaining at these facilities, as well as on the extent and characteristics of contamination in and around these facilities. This analysis unites specific environmental impacts of nuclear weapons production with particular production processes. The Department used historical records to connect nuclear weapons production processes with emerging data on waste and contamination. In this way, two of the Department`s legacies--nuclear weapons manufacturing and environmental management--have become systematically linked. The goal of this report is to provide Congress, DOE program managers, non-governmental analysts, and the public with an explicit picture of the environmental results of each step in the nuclear weapons production and disposition cycle.

  11. Energy security in the post-Cold War era: Identifying future courses for crises

    SciTech Connect (OSTI)

    Freund, M.T.; Wise, J.A.; Ulibarri, C.A.; Shaw, B.R.; Seely, H.E.; Roop, J.M.

    1994-11-01

    This paper addresses US energy security in the post-Cold War era for a conference on energy security jointly sponsored by the Department of Energy and the National Defense University. It examines the evolving nature of energy security based on analysis of past crisis-inducing events and-discusses potentially important geopolitical, environmental, regulatory, and economic developments during the next twenty-five years. The paper steps beyond the traditional economic focus of energy security issues to examine the interplay between fundamental economic and technical drivers on the one hand, and political, environmental, and perceptual phenomena, on the other hand, that can combine to create crises where none were expected. The paper expands on the premise that the recent demise of the Soviet Union and other changing world conditions have created a new set of energy dynamics, and that it is imperative that the United States revise its energy security perspective accordingly. It proceeds by reviewing key factors that comprise the concepts of ``energy security`` and ``energy crisis`` and how they may fit into the new world energy security equation. The study also presents a series of crisis scenarios that could develop during the next twenty-five years, paying particular attention to mechanisms and linked crisis causes and responses. It concludes with a discussion of factors that may serve to warn analysts and decision makers of impending future crises conditions. The crisis scenarios contained in this report should be viewed only as a representative sample of the types of situations that could occur. They serve to illustrate the variety of factors that can coalesce to produce a ``crisis.``

  12. TRASH TO TREASURE: CONVERTING COLD WAR LEGACY WASTE INTO WEAPONS AGAINST CANCER

    SciTech Connect (OSTI)

    Nicholas, R.G.; Lacy, N.H.; Butz, T.R.; Brandon, N.E.

    2004-10-06

    As part of its commitment to clean up Cold War legacy sites, the U.S. Department of Energy (DOE) has initiated an exciting and unique project to dispose of its inventory of uranium-233 (233U) stored at Oak Ridge National Laboratory (ORNL), and extract isotopes that show great promise in the treatment of deadly cancers. In addition to increasing the supply of potentially useful medical isotopes, the project will rid DOE of a nuclear concern and cut surveillance and security costs. For more than 30 years, DOE's ORNL has stored over 1,200 containers of fissile 233U, originally produced for several defense-related projects, including a pilot study that looked at using 233U as a commercial reactor fuel. This uranium, designated as special nuclear material, requires expensive security, safety, and environmental controls. It has been stored at an ORNL facility, Building 3019A, that dates back to the Manhattan Project. Down-blending the material to a safer form, rather than continuing to store it, will eliminate a $15 million a year financial liability for the DOE and increase the supply of medical isotopes by 5,700 percent. During the down-blending process, thorium-229 (229Th) will be extracted. The thorium will then be used to extract actinium-225 (225Ac), which will ultimately supply its progeny, bismuth-213 (213Bi), for on-going cancer research. The research includes Phase II clinical trials for the treatment of acute myelogenous leukemia at Sloan-Kettering Memorial Cancer Center in New York, as well as other serious cancers of the lungs, pancreas, and kidneys using a technique known as alpha-particle radioimmunotherapy. Alpha-particle radioimmunotherapy is based on the emission of alpha particles by radionuclides. 213Bi is attached to a monoclonal antibody that targets specific cells. The bismuth then delivers a high-powered but short-range radiation dose, effectively killing the cancerous cells but sparing the surrounding tissue. Production of the actinium and bismuth would be a private venture at no cost to the government. Isotek Systems, LLC, was commissioned by the DOE to execute the project, known as the 233U Disposition, Medical Isotope Production, and Building 3019 Complex Shutdown Project. Isotek is a partnership between Duratek Federal Services, Burns and Roe Enterprises, and Nuclear Fuel Services. By pooling their pioneering experiences in nuclear engineering and design, nuclear recycling, and waste management, the partnership has developed a novel process to meet this clean-up milestone. The project is not only important for its cancer treatment potential, but also for setting the stage for reducing global threats through the down-blending of materials.

  13. Status of Environmental Management Initiatives to Accelerate the Reduction of Environmental Risks and Challenges Posed by the Legacy of the Cold War

    Broader source: Energy.gov [DOE]

    This Report to Congress was prepared pursuant to section 3130 of the National Defense Authorization Act (NDAA) for Fiscal Year (FY) 2008, and summarized the EM program and initiatives to accelerate the reduction of environmental risks and challenges posed by the legacy of the Cold War.

  14. Major Contracts Awarded | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy Major Cold War Cleanup Milestone Reached at the Savannah River Site Major Cold War Cleanup Milestone Reached at the Savannah River Site March 29, 2012 - 10:37am Addthis WASHINGTON, DC - Today, the Energy Department announced it has reached a major milestone in the Department's efforts to clean up the Cold War legacy at the Savannah River Site (SRS) in South Carolina, laying the groundwork for closing two underground storage tanks that previously held radioactive liquid

  15. The Department of Energy Announces Major Cold War Legacy Waste Cleanup

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Demand Side: Behavioral Patterns and Unpicked Low-Hanging Fruit James Sweeney Stanford University Director Precourt Energy Efficiency Center (Née: Precourt Institute for Energy Efficiency) Professor, Management Science and Engineering 6 Source: McKinsey & Co. Increased commercial space Gasoline Price Controls Compact Fluorescent Penetration LED: Traffic Lights, Task Lighting Appliance Energy Labeling Gasoline Rationing Much Incandescent Lighting Congestion Pricing Personal Computer

  16. Status of Environmental Management Initiatives to Accelerate the Reduction of Environmental Risks and Challenges Posed by the Legacy of the Cold War

    SciTech Connect (OSTI)

    2009-01-01

    Fifty years of nuclear weapons production and energy research in the United States during the Cold War generated large amounts of radioactive wastes, spent nuclear fuel (SNF), excess plutonium and uranium, thousands of contaminated facilities, and contaminated soil and groundwater. During most of that half century, the Nation did not have the environmental regulatory structure or nuclear waste cleanup technologies that exist today. The result was a legacy of nuclear waste that was stored and disposed of in ways now considered unacceptable. Cleaning up and ultimately disposing of these wastes is the responsibility of the U.S. Department of Energy (DOE). In 1989, DOE established the Office of Environmental Management (EM) to solve the large scale and technically challenging risks posed by the world's largest nuclear cleanup. This required EM to build a new nuclear cleanup infrastructure, assemble and train a technically specialized workforce, and develop the technologies and tools required to safely decontaminate, disassemble, stabilize, disposition, and remediate unique radiation hazards. The sites where nuclear activities produced legacy waste and contamination include the original Manhattan Project sites--Los Alamos, New Mexico; Hanford, Washington; and Oak Ridge, Tennessee--as well as major Cold War sites, such as Savannah River Site, South Carolina; the Idaho National Laboratory, Idaho; Rocky Flats Plant, Colorado; and Fernald, Ohio. Today EM has responsibility for nuclear cleanup activities at 21 sites covering more than two million acres in 13 states, and employs more than 30,000 Federal and contractor employees, including scientists, engineers and hazardous waste technicians. This cleanup poses unique, technically complex problems, which must be solved under the most hazardous of conditions, and which will require billions of dollars a year for several more decades. The EM program focus during its first 10 years was on managing the most urgent risks and maintaining safety at each site while negotiating state and Federal environmental compliance agreements. The program also concentrated on characterizing waste and nuclear materials and assessing the magnitude and extent of environmental contamination. By the late 1990s, EM had made significant progress in identifying and characterizing the extent of contamination and cleanup required and began transitioning from primarily a characterization and stabilization program to an active cleanup and closure program. During that time, EM formulated multi-year cleanup and closure plans, which contributed to cleanup progress; however, reducing the overall environmental risk associated with the cleanup program remained a challenge. In response, the Secretary of Energy directed a review of the EM program be undertaken. The resulting 'Top-to Bottom Review' re-directed the program focus from managing risks to accelerating the reduction of these risks.

  17. A Cold War Battlefield: Frenchman Flat Historic District, Nevada Test Site, Nye County, Nevada

    SciTech Connect (OSTI)

    Johnson, William Gray; Holz, Barbara A; Jones, Robert

    2000-08-01

    This report provides the U.S. Department of Energy, Nevada Operations Office with the documentation necessary to establish the Frenchman Flat Historic District on the Nevada Test Site (NTS). It includes a list of historic properties that contribute to the eligibility of the district for inclusion in the National Register of Historic Places (NRHP) and provides contextual information establishing its significance. The list focuses on buildings, structures and features associated with the period of atmospheric testing of nuclear weapons on the NTS between 1951 and 1962. A total of 157 locations of buildings and structures were recorded of which 115 are considered to be eligible for the NRHP. Of these, 28 have one or more associated features which include instrumentation supports, foundations, etc. The large majority of contributing structures are buildings built to study the blast effects of nuclear weaponry. This has resulted in a peculiar accumulation of deteriorated structures that, unlike most historic districts, is best represented by those that are the most damaged. Limitations by radiological control areas, surface exposure and a focus on the concentration of accessible properties on the dry lake bed indicate additional properties exist which could be added to the district on a case-by-case basis.

  18. Energy Department Announces Achievement of Major Cleanup Milestone at Savannah River Site

    Broader source: Energy.gov [DOE]

    Today, the Department of Energy reached a major milestone in efforts to clean up the Cold War legacy at the Savannah River Site (SRS) in South Carolina, and took a step forward to closing additional radioactive tanks at the site

  19. Pulling History from the Waste Stream: Identification and Collection of Manhattan Project and Cold War Era Artifacts on the Hanford Site

    SciTech Connect (OSTI)

    Marceau, Thomas E.; Watson, Thomas L.

    2013-11-13

    One man's trash is another man's treasure. Not everything called "waste" is meant for the refuse pile. The mission of the Curation Program is at direct odds with the remediation objectives of the Hanford Site. While others are busily tearing down and burying the Site's physical structures and their associated contents, the Curation Program seeks to preserve the tangible elements of the Site's history from these structures for future generations before they flow into the waste stream. Under the provisions of a Programmatic Agreement, Cultural Resources staff initiated a project to identify and collect artifacts and archives that have historic or interpretive value in documenting the role of the Hanford Site throughout the Manhattan Project and Cold War Era. The genesis of Hanford's modern day Curation Program, its evolution over nearly two decades, issues encountered, and lessons learned along the way -- particularly the importance of upper management advocacy, when and how identification efforts should be accomplished, the challenges of working within a radiological setting, and the importance of first hand information -- are presented.

  20. From Cold War to cold vessels

    SciTech Connect (OSTI)

    Melrath, C.

    1996-09-01

    This article describes a former Soviet weapons plant which is converted to produce cryogenic vessels and other peaceful cylinders. In 1995, Byelocorp Scientific Inc. (BSI), a New York-based firm that specializes in transferring technologies developed in the former Soviet Union, began converting a huge military defense plant in Kazakhstan into civilian-industrial use. The nearly 750,000-square-foot factory in Almaty, the capital of the former Soviet republic, was previously used to manufacture torpedo shells and ballistic rocket casings. The old defense plant, which was known as Gidromash, will now manufacture cylinders of a kinder, gentler variety--cryogenic vessels. The Kazakhstan operation is being managed jointly with Supco Srl., an Italian manufacturing, engineering, and construction company. With financing from the US Department of Defense, BSI, Supco, and the Kazakhstan government, a new joint venture called Byelkamit (a combination of Byelocorp, Kazakhstan, America, and Italy) was established.

  1. Thermostat Wars

    Broader source: Energy.gov [DOE]

    The other day, I was visiting a friend's office and noticed something you may have noticed yourself: his building had a variety of micro-climates, ranging from the furnace hot to the freezing cold.

  2. War, peace, and international politics. Fourth edition

    SciTech Connect (OSTI)

    Ziegler, D.W. )

    1987-01-01

    We must conclude that war remains a major problem in the last quarter of the twentieth century. My intention in this book is to introduce you to international relations by focusing on this problem. War is not the only problem of international relations, and so this book does not exhaust the field. But war is a central problem, and the possibility of resort to war affects other aspects of international relations. Whatever else we may look at, we cannot avoid looking at war. In fact, in looking at war, we will touch on most of the other subjects important in international relations. War is conflict among states carried on by their armed forces. To distinguish war from border skirmishes and other minor incidents we usually say it must reach a certain magnitude (for example, at least 1,000 soldiers killed in battle over a year). It would be ideal if we could systematically study all the wars in the last hundred years, but such an exhaustive study would be out of place here. At the same time we cannot discuss such subjects as the cause of war or proposals for preventing it without some knowledge about actual wars. We must test theories against historical facts. What follows in Part I is a somewhat detailed history of seven wars (or groups of wars) fought in the last hundred years. These include the most destructive of the wars World War I (1914-1918), World War II (1939-1945), and the Korean War (1950-1953). By way of background to World War I, we will look at the wars of German unification (1864-1871), which preceded and in some ways prepared the way for it. To balance our account, we will also look at several recent wars India and Pakistan (1971), Uganda and Tanzania (1978-1979), and Cambodia, Vietnam, and China (1978-1980). After looking at some of the major wars of the last hundred years, we will look at what people have the about the causes of war in general.

  3. Water Wars

    Energy Science and Technology Software Center (OSTI)

    2012-09-11

    Sandia National Laboratories and Intel Corporation are cooperating on a project aimed at developing serious games to assist in resource planners in conducting open and participatory projects. Water Wars serves as a prototype game focused on water issues. Water Wars is a multi-player, online role-playing "serious game" combining large-scale simulation (e.g. SimCity), with strategy and interpersonal interaction (e.g. Diplomacy). The game is about water use set in present-day New Mexico. Players enact various stakeholder rolesmore » and compete for water while simultaneously cooperating to prevent environmental collapse. The gamespace utilizes immersive 3D graphics to bring the problem alive. The game integrates Intel's OpenSim visualization engine with Sandia developed agent-based and system dynamics models.« less

  4. The Cold War comes to Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on August 6, 1945 when the first atomic bomb used in warfare was dropped on Hiroshima, Japan. The material in that bomb came from Y-12. Oak Ridger's learned for the first time...

  5. Nuclear proliferation after the Cold War

    SciTech Connect (OSTI)

    Reiss, M.; Litwak, R.S.

    1994-01-01

    Today, former Soviet republics threaten to gain control over nuclear weapons sited on their territories, and reports on North Korea, Pakistan, India, and Iraq reveal current or recent weapon development programs. This document offers a timely assessment of the prospects for nuclear nonproliferation.

  6. Early steps in the Cold War

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    everyone agreed upon exactly what type bomb should be built. Even Robert Oppenheimer and Edward Teller, both leading scientists who were at the forefront of the nuclear age,...

  7. War Ends | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    War Ends War Ends Local newspapers declare "War Ends"

  8. Cold fusion research

    SciTech Connect (OSTI)

    1989-11-01

    I am pleased to forward to you the Final Report of the Cold Fusion Panel. This report reviews the current status of cold fusion and includes major chapters on Calorimetry and Excess Heat, Fusion Products and Materials Characterization. In addition, the report makes a number of conclusions and recommendations, as requested by the Secretary of Energy.

  9. World War II

    National Nuclear Security Administration (NNSA)

    loved ones, viewing photographs and documents with Truman Library historians and listening to WWII veteran Max DeWeese reminisce about his experience in the war.

  10. The effects of a nuclear war

    SciTech Connect (OSTI)

    Alred, W.T. )

    1990-10-01

    Many factors influence the impact that a nuclear war would have on both the environment and survivors. These factors include, although are not limited to, the type of nuclear weapons used, the amount of these weapons, and the time of year a war would take place. The effects that a major nuclear war would have on the environment would vary greatly depending on the factors previously mentioned. Some effects that would occur are: major climatic changes, destruction of most food crops, contamination of current food and water supplies, and the deaths of animals and insects that are crucial to the balance of the environment. The factors that influence the survivors also vary; however, certain problems have been predicted by researchers. Among these problems are psychological disorders, lack of food supplies, the elimination of medical relief, and exposure from both radiation and the changing environment. All these effects, as well as others, tend to give researchers a much different view of the effects that a nuclear war would have on the environment and survivors than has been predicted since before the mid nineteen-eighties.

  11. cold standby

    Energy Savers [EERE]

    Cold Standby Program at the Portsmouth Gaseous Diffusion Plant DOE/IG-0634 December 2003 Program Results and Cost Details of Finding ...................................................................... 1 Recommendations and Comments ........................................... 5 Appendices Prior Reports .............................................................................. 7 Objective, Scope, and Methodology .......................................... 8 Management Comments

  12. COLD TRAP

    DOE Patents [OSTI]

    Milleron, N.

    1963-03-12

    An improved linear-flow cold trap is designed for highvacuum applications such as mitigating back migration of diffusion pump oil moiecules. A central pot of liquid nitrogen is nested within and supported by a surrounding, vertical, helical coil of metai sheet, all enveloped by a larger, upright, cylindrical, vacuum vessel. The vertical interstices between successive turns of the coil afford lineal, axial, high-vacuum passages between open mouths at top and bottom of said vessel, while the coil, being cold by virtue of thermal contact of its innermost turn with the nitrogen pot, affords expansive proximate condensation surfaces. (AEC)

  13. Recovery Act funds advance cleanup efforts at Cold War site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    historic Technical Area 21. "These buildings served their purpose during a difficult time in American history," said LANL Recovery Act cleanup director Bruce Schappell. "It's...

  14. The Cold War approaches and Y-12s workload grows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    next round of atomic weapons after the Gadget (the Trinity Test), Little Boy (dropped on Hiroshima) and Fat Man (dropped on Nagasaki). But, this would soon change. Y-12's role in...

  15. Y-12s takes on the Cold War

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    era of constant low-grade fear and worry punctuated by unforgettable moments of sheer terror." Salman describes the powerful position the Soviet Union seemed to hold when Nikita...

  16. The Power of Choice ? Cold War Patriots Day of Remembrance...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and went to the messy hole in the floor and with his bare hands and that small amount of water, he cleaned the feces from the floor and the hole. The rest of the prisoners grew...

  17. The Power of Choice ? Cold War Patriots Day of Remembrance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Y-12 New Hope Center on October 28, 2011. This facility is provided by the Y-12 National Security Complex to 501 (C) 3 organizations (a damage deposit of 500 is required) to use...

  18. Summer Fellow Explores EM's Cold War Cleanup | Department of Energy

    Office of Environmental Management (EM)

    Summary_of_Tele_Conf.PDF Summary_of_Tele_Conf.PDF PDF icon Summary_of_Tele_Conf.PDF More Documents & Publications ISSUANCE 2016-05-19: Energy Conservation Program: Test Procedures for Central Air Conditioners and Heat Pumps Final Rule 2014-02-07 Issuance: Alternative Efficiency Determination Methods and Test Procedures for Walk-In Coolers and Walk-In Freezers; Supplemental Notice of Proposed Rulemaking Microsoft Word - CCE_Final_Rule_02-07-11 _Final Word_.docx

    Summer Fellow

  19. Lab begins demolition of Cold War-era buildings

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    something this morning that has not happened since the late 1940s," said Isaac "Ike" Richardson, the Lab's deputy director. "The Los Alamos skyline is starting to change." More...

  20. COLD TRAPS

    DOE Patents [OSTI]

    Thompson, W.I.

    1958-09-30

    A cold trap is presented for removing a condensable component from a gas mixture by cooling. It consists of a shell, the exterior surface of which is chilled by a refrigerant, and conductive fins welded inside the shell to condense the gas, and distribute the condensate evenly throughout the length of the trap, so that the trap may function until it becomes completely filled with the condensed solid. The contents may then be removed as either a gas or as a liquid by heating the trap. This device has particuinr use as a means for removing uranium hexafluoride from the gaseous diffusion separation process during equipment breakdown and repair periods.

  1. Environmental consequences of nuclear war

    SciTech Connect (OSTI)

    Toon, Owen B.; Robock, Alan; Turco, Richard P.

    2014-05-09

    A regional war involving 100 Hiroshima-sized weapons would pose a worldwide threat due to ozone destruction and climate change. A superpower confrontation with a few thousand weapons would be catastrophic.

  2. Prevention of nuclear war

    SciTech Connect (OSTI)

    Lifton, R.J.

    1980-10-01

    Physicians are exercising their responsibility as healers in their efforts to prevent nuclear war. Death for Hiroshima survivors was experienced in four stages: the immediate impact of destruction, the acute impact of radiation, delayed radiation effects, and later identification as an atomic bomb survivor. Each phase had its physical and psychological impacts and negates Hiroshima as a model for rational behavior despite those who claim survival is possible for those who are prepared. The psychic effects of modern nuclear, chemical, and germ warfare need to be challenged with a symbolization of life and immortality. Studies of psychological reactions to the terror children felt during practice air-raid drills indicate that the fears can be surpressed and re-emerge in adult life as a linking of death with collective annihilation. Other themes which emerge are feelings of impermanence, craziness, identification with the bomb, and a double existence. Psychic numbing and the religion of nuclearism cause dangerous conflicts with the anxieties caused by increasing awareness of death. (DCK)

  3. Psychological aspects of nuclear war

    SciTech Connect (OSTI)

    Thompson, J.

    1985-01-01

    Exploring the nature of nuclear war, this treatise examines human reaction to nuclear disaster and accidental explosions. The discussion is based on evidence of human fallibility that has emerged from the psychology of accidents and from research into decision-making in military and political contexts. The book draws on the psychology of negotiation and conflict resolution to suggest ways in which the threat of nuclear war might be reduced.

  4. Carbon War Room | Open Energy Information

    Open Energy Info (EERE)

    War Room Jump to: navigation, search Name: Carbon War Room Place: Washington, DC Number of Employees: 1-10 Website: www.carbonwarroom.com Coordinates: 38.8951118, -77.0363658...

  5. Tracing And Quantifying Magmatic Carbon Discharge In Cold Groundwaters...

    Open Energy Info (EERE)

    Journal Article: Tracing And Quantifying Magmatic Carbon Discharge In Cold Groundwaters- Lessons Learned From Mammoth Mountain, Usa Abstract A major campaign to quantify the...

  6. World War II | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    World War II Keeping the "Spirit of '45 Alive" in Kansas City National Security Campus employees commemorated the 70th anniversary of the end of World War II by sharing stories of their loved ones, viewing photographs and documents with Truman Library historians and listening to WWII veteran Max DeWeese reminisce about his experience in the war. The August

  7. Profiteering on the Iran-Iraq war

    SciTech Connect (OSTI)

    Brzoska, M.

    1987-06-01

    The military gear delivered from the US in the Iran-contra affair represents only a minor portion of arms sales to the combatants in the Iraq-Iran war. That war has now lasted more than six years and has deeply influenced the international arms market. Occurring during a period when other demand for arms has been relatively low, the war has nourished new suppliers and has revived both the legal and illegal private arms market. The erratic behavior of the USSR and the US, until recently by far the most important arms suppliers to the Third World, has pushed Iran and Iraq toward more commercially oriented sources, including many in the Third World. Both countries have had ample supplies of weapons during the war, and these weapons have served their purpose. Mainly because of its duration, the war already ranks third among post-World War II wars - after the Vietnam war and the Biafra war - in battlefield victims, with 300,000-500,000 casualties. The economic cost has risen to nearly $500 billion in weapons, destruction, and lost income. While it is hard to see anything but losers on the battlefield, the arms traffickers are profiting. Total Iranian arms imports since August 1980 have been higher than $10 billion, while Iraq has imported more than $30 billion worth. It is difficult to know whether making arms more difficult to obtain would have stopped the war, but judging from other recent wars, such as those between India and Pakistan, between Uganda and Tanzania, and in the Middle East, it seems likely that hostilities could have been stopped long ago. 12 references.

  8. Cold fusion, Alchemist's dream

    SciTech Connect (OSTI)

    Clayton, E.D.

    1989-09-01

    In this report the following topics relating to cold fusion are discussed: muon catalysed cold fusion; piezonuclear fusion; sundry explanations pertaining to cold fusion; cosmic ray muon catalysed cold fusion; vibrational mechanisms in excited states of D{sub 2} molecules; barrier penetration probabilities within the hydrogenated metal lattice/piezonuclear fusion; branching ratios of D{sub 2} fusion at low energies; fusion of deuterons into {sup 4}He; secondary D+T fusion within the hydrogenated metal lattice; {sup 3}He to {sup 4}He ratio within the metal lattice; shock induced fusion; and anomalously high isotopic ratios of {sup 3}He/{sup 4}He.

  9. The strategic offense initiative? The Soviets and Star Wars

    SciTech Connect (OSTI)

    Westwick, Peter J.

    2014-05-09

    Historians of the Cold War have paid too little attention to Soviet fears of 'space-strike weapons' - that is, possible offensive uses of President Ronald Reagan's Strategic Defense Initiative. In fifteen years or so, soldiers will no longer shoot rifles but will use some kind of lightning, some sort of a machine emitting a holocaustal electrical beam. Tell me, what can we invent in this line so as to surprise our neighbors?... Alas, we are only capable of imitating and purchasing weapons from others, and we do well if we manage to repair them ourselves. --Fyodor Dostoevsky, A Writer's Diary, 1873. [Khlinov, a physicist]: 'I know that he has made an important discovery concerning the transmission of infra-red rays over a distance.... Heat waves at a temperature of a thousand degrees centigrade transmitted parallel to each other constitute a monstrous weapon of destruction and defense in time of war. The whole secret lies in the transmission of a ray that does not disperse. So far nobody has been able to do this. Judging by your story, Garin has constructed a machine that will do it. If so it is an extremely important discovery.' 'I've been thinking for a long time that this invention smells of higher politics,' said Shelga. --Aleksei Tolstoy, The Garin Death Ray, 1927 (translated by George Hanna)

  10. PR_NA-03-13_FromColdWartoWaronCancer-PETRussia_10-03_.doc

    National Nuclear Security Administration (NNSA)

    U.S. Department of Energy For Immediate Release Bryan Wilkes October 28, 2003 202-586-7371 From the Cold War to the War on Cancer NNSA-sponsored program to employ Russian scientists in cancer treatment facility WASHINGTON, D.C. - Former nuclear weapons scientists, engineers and technicians will soon begin working in a Russian life-saving cancer treatment facility under an important nonproliferation program run by the National Nuclear Security Administration (NNSA). The Positron Emission

  11. Hot and cold fusion

    SciTech Connect (OSTI)

    Not Available

    1990-08-01

    This article presents an overview of research in cold fusion research and development in cold fusion at the Tokomak Fusion Test Reactor at the Princeton Plasma Physics Lab, and at the inertial containment facility at Lawrence Livermore National Lab. is described.

  12. Intersecting Cold Pools: Convective Cloud Organization by Cold...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Intersecting Cold Pools: Convective Cloud Organization by Cold Pools over Tropical Ocean For original submission and image(s), see ARM Research Highlights http:www.arm.gov...

  13. Cold versus hot fusion deuterium branching ratios

    SciTech Connect (OSTI)

    Fox, H.; Bass, R.

    1995-12-31

    A major source of misunderstanding of the nature of cold nuclear fusion has been the expectation that the deuterium branching ratios occurring within a palladium lattice would be consistent with the gas-plasma branching ratios. This misunderstanding has led to the concept of the dead graduate student, the 1989`s feverish but fruitless search for neutron emissions from cold fusion reactors, and the follow-on condemnation of the new science of cold fusion. The experimental facts are that in a properly loaded palladium lattice, the deuterium fusion produces neutrons at little above background, a greatly less-than-expected production of tritium (the tritium desert), and substantially more helium-4 than is observed in hot plasma physics. The experimental evidence is now compelling (800 reports of success from 30 countries) that cold nuclear fusion is a reality, that the branching ratios are unexpected, and that a new science is struggling to be recognized. Commercialization of some types of cold fusion devices has already begun.

  14. Cold spray nozzle design

    DOE Patents [OSTI]

    Haynes, Jeffrey D.; Sanders, Stuart A.

    2009-06-09

    A nozzle for use in a cold spray technique is described. The nozzle has a passageway for spraying a powder material, the passageway having a converging section and a diverging section, and at least the diverging section being formed from polybenzimidazole. In one embodiment of the nozzle, the converging section is also formed from polybenzimidazole.

  15. Cold fusion coatings

    SciTech Connect (OSTI)

    Wachtler, W.R.

    1993-12-31

    Historically, fusion of metals was accomplished through the use of heat. Cold fusion has become a reality with metal to metal fusion occurring at room temperature. The basics of this new technology which can be done in tank, brush or solid form is covered in this paper.

  16. The Energy of Star Wars: A Google+ Hangout | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Energy of Star Wars: A Google+ Hangout The Energy of Star Wars: A Google+ Hangout Addthis

  17. Worry grows as Iran/Iraq war lingers

    SciTech Connect (OSTI)

    Not Available

    1980-11-03

    Despite the Iran/Iraq war and the prospect of greater disruption of Persian Gulf oil deliveries, the international crude market has adjusted to the loss of supplies and remains stable, partly because some nonwarring members of the Organization of Petroleum Exporting Countries have boosted production to make up losses and partly because the industrialized nations have maintained high levels of crude and product stocks. These stocks would be draw-depleted in nine months if used at the rate of 1.8 million bbl/day; this and a 2 million bbl/day increase in OPEC production would make up for the entire war-caused shortfall. If the Strait of Hormuz were closed, the shortfall would be 17 million bbl/day, which would deplete stocks in less than one month. Patterns of supply and demand in non-Communist western countries in 1978-79 and 1979-80; the International Energy Agency oil-sharing plan which would go into effect in the case of a major oil shortage; and the prospects for a surge in prices in the international oil markets, are discussed.

  18. Radial cold trap

    DOE Patents [OSTI]

    Grundy, Brian R.

    1981-01-01

    The radial cold trap comprises a housing having a plurality of mesh bands disposed therein. The mesh bands comprise concentrically arranged bands of mesh with the mesh specific surface area of each band increasing from the outermost mesh band to the innermost mesh band. An inlet nozzle is attached to the outside section of the housing while an outlet nozzle is attached to the inner portion of the housing so as to be concentrically connected to the innermost mesh band. An inlet baffle having orifices therein may be disposed around the outermost mesh band and within the housing for directing the flow of the fluid from the inlet nozzle to the outermost mesh band in a uniform manner. The flow of fluid passes through each consecutive mesh band and into the outlet nozzle. The circular pattern of the symmetrically arranged mesh packing allows for better utilization of the entire cold trap volume.

  19. Radial cold trap

    DOE Patents [OSTI]

    Grundy, B.R.

    1981-09-29

    The radial cold trap comprises a housing having a plurality of mesh bands disposed therein. The mesh bands comprise concentrically arranged bands of mesh with the mesh specific surface area of each band increasing from the outermost mesh band to the innermost mesh band. An inlet nozzle is attached to the outside section of the housing while an outlet nozzle is attached to the inner portion of the housing so as to be concentrically connected to the innermost mesh band. An inlet baffle having orifices therein may be disposed around the outermost mesh band and within the housing for directing the flow of the fluid from the inlet nozzle to the outermost mesh band in a uniform manner. The flow of fluid passes through each consecutive mesh band and into the outlet nozzle. The circular pattern of the symmetrically arranged mesh packing allows for better utilization of the entire cold trap volume. 2 figs.

  20. Cold nuclear fusion

    SciTech Connect (OSTI)

    Tsyganov, E. N.

    2012-02-15

    Recent accelerator experiments on fusion of various elements have clearly demonstrated that the effective cross-sections of these reactions depend on what material the target particle is placed in. In these experiments, there was a significant increase in the probability of interaction when target nuclei are imbedded in a conducting crystal or are a part of it. These experiments open a new perspective on the problem of so-called cold nuclear fusion.

  1. The Cold War ends ... now what? | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing for Stockpile Stewardship (Conference) | SciTech Connect The Cielo Petascale Capability Supercomputer: Providing Large-Scale Computing for Stockpile Stewardship Citation Details In-Document Search Title: The Cielo Petascale Capability Supercomputer: Providing Large-Scale Computing for Stockpile Stewardship Authors: Vigil, Benny Manuel [1] ; Doerfler, Douglas W. [1] + Show Author Affiliations Los Alamos National Laboratory Publication Date: 2013-03-11 OSTI Identifier: 1068213 Report

  2. Architectural Framework for Addressing Legacy Waste from the Cold War - 13611

    SciTech Connect (OSTI)

    Love, Gregory A.; Glazner, Christopher G.; Steckley, Sam

    2013-07-01

    We present an architectural framework for the use of a hybrid simulation model of enterprise-wide operations used to develop system-level insight into the U.S. Department of Energy's (DOE) environmental cleanup of legacy nuclear waste at the Savannah River Site. We use this framework for quickly exploring policy and architectural options, analyzing plans, addressing management challenges and developing mitigation strategies for DOE Office of Environmental Management (EM). The socio-technical complexity of EM's mission compels the use of a qualitative approach to complement a more a quantitative discrete event modeling effort. We use this model-based analysis to pinpoint pressure and leverage points and develop a shared conceptual understanding of the problem space and platform for communication among stakeholders across the enterprise in a timely manner. This approach affords the opportunity to discuss problems using a unified conceptual perspective and is also general enough that it applies to a broad range of capital investment/production operations problems. (authors)

  3. On the Front Lines of the Cold War Los Alamos 1970-1992 (Technical...

    Office of Scientific and Technical Information (OSTI)

    Research Org: Los Alamos National Laboratory (LANL) Sponsoring Org: DOELANL Country of Publication: United States Language: English Subject: General & Miscellaneous(99); Military ...

  4. LANL Reaches Waste Shipment Milestone: Waste from Cold War-era weapons

    Office of Environmental Management (EM)

    Energy Address to the American Council on Renewable Energy Keynote Address to the American Council on Renewable Energy June 20, 2007 - 2:07pm Addthis Remarks Prepared for Energy Secretary Samuel W. Bodman Thank you, Michael, for that introduction and thank you all for coming. It is good to be in New York, back among the financial community. For those of you who don't know, when I left M.I.T - where I taught chemical engineering - to enter the business world I started out as a venture

  5. DOE Announces Strategic Engineering and Technology Roadmap for Cleanup of Cold War Era Nuclear Waste

    Broader source: Energy.gov [DOE]

    WASHINGTON, DC - The U.S. Department of Energy (DOE) today released an Engineering and Technology Roadmap (Roadmap), which details initiatives aimed at reducing the technical risks and...

  6. Strip edge cracking simulation in cold rolling

    SciTech Connect (OSTI)

    Hubert, C.; Dubar, L.; Dubar, M.; Dubois, A.

    2011-01-17

    This research work focuses on a specific defect which occurs during cold rolling of steel strips: edge-serration. Investigations on the industrial processes have led to the conclusion that this defect is the result of the edge-trimming and cold rolling sequences. The aim of this research work is to analyze the effect of the cutting process and the cold rolling on cracks occurrence, especially on strip edges.This study is performed using an experimental testing stand called Upsetting Rolling Test (URT). It allows to reproduce cold rolling contact parameters such as forward slip, reduction ratio and friction coefficients. Specimens sampled near trimmed industrial strip edges are deformed using the URT stand. Two sets of specimens with different stress states, obtained by annealing, are submitted to two reduction passes with extreme forward slips.Scanning electron microscopy observations added to 3D optical surface profiler topographies show that on one hand, forward slip has a major effect on cracks opening. On the other hand, cracks opening decreases according to high roll strip speed gradient. Concerning the heat-treated specimens, no crack appeared after all reduction passes, showing a large influence of the cutting process and consequently of the local stress state in the vicinity of the burnish and fracture regions.

  7. Solid Cold - A

    Office of Scientific and Technical Information (OSTI)

    Celebrating Einstein "Solid Cold" By the early 20th century, the way in which temperatures of solid objects changed as they absorbed heat was considered strong evidence that matter was not made of atoms. Einstein used some recent discoveries about light to turn this assessment around. A B C D E F A. A puzzle, and a surprising solution Take equal masses of lead and aluminum. Heat them until their temperatures are both 10 degrees higher. Will it take the same amount of heat for each?

  8. Peregrinations on cold fusion

    SciTech Connect (OSTI)

    Turner, L.

    1989-01-01

    Attention is focused on the possibility of resonance-enhanced deuteron Coulomb barrier penetration. Because of the many-body nature of the interactions of room-temperature deuterons diffusing through a lattice possessing deuterons in many of the interstitial positions, the diffusing deuterons can resonate on the atomic scale in the potential wells bounded by the ascending walls of adjacent Coulomb barriers and thereby penetrate the Coulomb barriers in a fashion vastly underestimated by two-body calculations in which wells for possible resonance are absent. Indeed, perhaps the lack of robust reproducibility in cold fusion originates from the narrowness of such transmission resonances. 4 refs., 1 fig.

  9. Psychology and the prevention of nuclear war

    SciTech Connect (OSTI)

    White, R.K.

    1986-01-01

    This book is about our ways of thinking and about how they need to be and can be changed. It is not about the ''unparalleled catastrophe.'' By now many of us know much about that, and unless we an see clear, acceptable, and practical ways to prevent it, our minds recoil from the whole horrible subject. Therefore, the book is about the prevention of nuclear war and nothing else. At least, that is its purpose. Yet its method is primarily descriptive and analytical rather than action-oriented. It explores from different perspectives the possible causes of a world war that could be at the outset, or become, nuclear, with a special focus on the often-neglected psychological aspects of those causes. It is diagnosis more than prescription. In fact, it might be described as a many-sided effort to understand the nature and roots of the ''madness'' of our present drift toward a great war that each side is urgently-desperately-anxious to avoid. In so doing it draws on some of the insights of psychiatry (from the psychiatrists Robert Jay Lifton, John E. Mack, Jerome D. Frank, and Erich Fromm), as well as on the three disciplines that provide the chief foundation for the book: history, political science, and social psychology.

  10. Sandia grew out of America's World War II atomic bomb development effort. Toda

    National Nuclear Security Administration (NNSA)

    grew out of America's World War II atomic bomb development effort. Today, keeping the U.S. nuclear stockpile safe, secure, and reliable remains a major part of Sandia's work. But Sandia's role has evolved to address other national security threats facing our country. Sandia carries out research and development in the following areas: Nuclear Weapons - Supporting U.S. deterrence policy by helping sustain, modernize, and protect the nuclear arsenal. Defense Systems & Assessments - Supplying

  11. Cold isopressing method

    SciTech Connect (OSTI)

    Chen, Jack C.; Stawisuck, Valerie M.; Prasad, Ravi

    2003-01-01

    A cold isopressing method in which two or more layers of material are formed within an isopressing mold. One of the layers consists of a tape-cast film. The layers are isopressed within the isopressing mold, thereby to laminate the layers and to compact the tape-cast film. The isopressing mold can be of cylindrical configuration with the layers being coaxial cylindrical layers. The materials used in forming the layers can contain green ceramic materials and the resultant structure can be fired and sintered as necessary and in accordance with known methods to produce a finished composite, ceramic structure. Further, such green ceramic materials can be of the type that are capable of conducting hydrogen or oxygen ions at high temperature with the object of utilizing the finished composite ceramic structure as a ceramic membrane element.

  12. Civil War Icon Becomes National Clean Energy Model

    Broader source: Energy.gov [DOE]

    Nearly a century and a half after the first shots of the Civil War, Fort Sumter National Monument is poised to become a national model for clean energy.

  13. LPG dealers, manufacturers report diverse effects of recession and war

    SciTech Connect (OSTI)

    Prowler, S.

    1991-01-01

    The author presents a survey of LPG marketers. The effects of the Persian Gulf War and U.S. recession on the LPG industry are discussed.

  14. High Flux Isotope Reactor cold neutron source reference design concept

    SciTech Connect (OSTI)

    Selby, D.L.; Lucas, A.T.; Hyman, C.R.

    1998-05-01

    In February 1995, Oak Ridge National Laboratory`s (ORNL`s) deputy director formed a group to examine the need for upgrades to the High Flux Isotope Reactor (HFIR) system in light of the cancellation of the Advanced neutron Source Project. One of the major findings of this study was that there was an immediate need for the installation of a cold neutron source facility in the HFIR complex. In May 1995, a team was formed to examine the feasibility of retrofitting a liquid hydrogen (LH{sub 2}) cold source facility into an existing HFIR beam tube. The results of this feasibility study indicated that the most practical location for such a cold source was the HB-4 beam tube. This location provides a potential flux environment higher than the Institut Laue-Langevin (ILL) vertical cold source and maximizes the space available for a future cold neutron guide hall expansion. It was determined that this cold neutron beam would be comparable, in cold neutron brightness, to the best facilities in the world, and a decision was made to complete a preconceptual design study with the intention of proceeding with an activity to install a working LH{sub 2} cold source in the HFIR HB-4 beam tube. During the development of the reference design the liquid hydrogen concept was changed to a supercritical hydrogen system for a number of reasons. This report documents the reference supercritical hydrogen design and its performance. The cold source project has been divided into four phases: (1) preconceptual, (2) conceptual design and testing, (3) detailed design and procurement, and (4) installation and operation. This report marks the conclusion of the conceptual design phase and establishes the baseline reference concept.

  15. Residential Cold Climate Heat Pump (CCHP)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Cold Climate Heat Pump (CCHP) 2014 Building Technologies Office Peer Review ... systems. 2 The Unico Cold Climate Heat Pump (CCHP) * In partnership with the U.S. ...

  16. War curbs oil exports by Iran and Iraq

    SciTech Connect (OSTI)

    Not Available

    1980-09-29

    A discussion of the effects of the war between Iran and Iraq on oil exports from the area covers damage (extent unknown) to the Abadan, Iran, and Basra, Iraq, oil refineries, to the Iraqi petrochemical complex under construction at Basra, to oil export terminals at Kharg Island and Mina-al-Bakr, and to other oil facilities; war-caused reductions in oil production, refining, shipping, and export, estimated at 2.05-3.35 million bbl/day; the possible effects of the war on OPEC's decisions concerning oil production and pricing; the significance of the Strait of Hormuz for the export of oil by several countries in addition to the belligerents; the U.S. and non-Communist oil stocks which might enable the world to avoid an oil shortage if the war is ended in the near future; and the long-term effects of the war on Iran's and Iraq's oil industries.

  17. Plasma fusion and cold fusion

    SciTech Connect (OSTI)

    Hideo, Kozima

    1996-12-31

    Fundamental problems of plasma fusion (controlled thermonuclear fusion) due to the contradicting demands of the magnetic confinement of plasma and suppression of instabilities occurring on and in plasma are surveyed in contrast with problems of cold fusion. Problems in cold fusion due to the complicated constituents and types of force are explained. Typical cold fusion events are explained by a model based on the presence of trapped neutrons in cold fusion materials. The events include Pons-Fleishmann effect, tritium anomaly, helium 4 production, and nuclear transmutation. Fundamental hypothesis of the model is an effectiveness of a new concept--neutron affinity of elements. The neutron affinity is defined and some bases supporting it are explained. Possible justification of the concept by statistical approach is given.

  18. The Gulf War and the environment

    SciTech Connect (OSTI)

    El-Baz, F. (ed.) (Boston Univ., MA (United States). Center for Remote Sensing); Makharita, R.M. (ed.) (World Bank, Washington, DC (United States))

    1994-01-01

    The Gulf War inflicted dramatic environmental damage upon the fragile desert and shore environments of Kuwait and northeastern Saudi Arabia. Coastal and marine environments experienced oil spills of more than 8 million barrels, which killed wildlife and damaged the fishing industry. In inland Kuwait, hundreds of oil lakes are scattered across the desert surface: these lakes emit noxious gases, drown insects and birds, and may seep to pollute groundwater. Exploding and burning oil wells released soot particles, oil droplets, and noxious chemicals into the atmosphere, spreading air pollution, acid rain, and respiratory problems. Military diggings, constructions, and vehicles have destroyed much of the desert pavement, resulting in increased dust storms and large, moving dunes.

  19. The Manhattan Project: Science in the Second World War

    SciTech Connect (OSTI)

    Gosling, F.G.

    1990-08-01

    The Manhattan Project: Science in the Second World War'' is a short history of the origins and development of the American atomic bomb program during World War II. Beginning with the scientific developments of the pre-war years, the monograph details of the role of the United States government in conducting a secret, nationwide enterprise that took science from the laboratory and into combat with an entirely new type of weapon. The monograph concludes with a discussion of the immediate postwar period, the debate over the Atomic Energy Act of 1946, and the founding of the Atomic Energy Commission.

  20. Guides and Case Studies for Cold and Very Cold Climates | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Cold and Very Cold Climates Guides and Case Studies for Cold and Very Cold Climates Map of the Cold & Very Cold Zones of the United States. The far tips of North Dakota, Maine, and southern Alaska are shown as Very Cold. The northern half of the United States is shown as Cold. The U.S. Department of Energy (DOE) Building America program has developed a best practice guide and case studies to help builders improve whole-house energy performance in homes found in cold and very

  1. Cold air systems: Sleeping giant

    SciTech Connect (OSTI)

    MacCracken, C.D. )

    1994-04-01

    This article describes how cold air systems help owners increase the profits from their buildings by reducing electric costs and improving indoor air quality through lower relative humidity levels. Cold air distribution involves energy savings, cost savings, space savings, greater comfort, cleaner air, thermal storage, tighter ducting, coil redesign, lower relative humidities, retrofitting, and improved indoor air quality (IAQ). It opens a door for architects, engineers, owners, builders, environmentalists, retrofitters, designers, occupants, and manufacturers. Three things have held up cold air's usage: multiple fan-powered boxes that ate up the energy savings of primary fans. Cold air room diffusers that provided inadequate comfort. Condensation from ducts, boxes, and diffusers. Such problems have been largely eliminated through research and development by utilities and manufacturers. New cold air diffusers no longer need fan powered boxes. It has also been found that condensation is not a concern so long as the ducts are located in air conditioned space, such as drop ceilings or central risers, where relative humidity falls quickly during morning startup.

  2. Our Role in the War on Cancer | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Our Role in the War on Cancer Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on...

  3. Cold Test Facility - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Projects & Facilities Cold Test Facility About Us About Hanford Cleanup Hanford History Hanford Site Wide Programs Contact Us 100 Area 118-K-1 Burial Ground 200 Area 222-S Laboratory 242-A Evaporator 300 Area 324 Building 325 Building 400 Area/Fast Flux Test Facility 618-10 and 618-11 Burial Grounds 700 Area B Plant B Reactor C Reactor Canister Storage Building and Interim Storage Area Canyon Facilities Cold Test Facility D and DR Reactors Effluent Treatment Facility Environmental

  4. Capping blowouts from Iran's eight-year war

    SciTech Connect (OSTI)

    Sayers, B. )

    1991-05-01

    This paper reports on capping blowouts from Iran's eight year war. Fires in three Iranian wells (two oil, one gas), started during 1987 by Iraqi sabotage, finally were extinguished during the last several months of 1990. Burning during the final months of the countries' eight-year war, plus another subsequent peaceful two years, the fires consumed millions of barrels of oil and billions of cubic feet of gas before they were capped. Ironically, bringing the wells under control took relatively little time.

  5. Major Components of Lending

    Broader source: Energy.gov [DOE]

    The major components of a clean energy financing program are described below, centered around the characteristics and sources of capital.

  6. Cold fusion; Myth versus reality

    SciTech Connect (OSTI)

    Rabinowitz, M. )

    1990-01-01

    Experiments indicate that several different nuclear reactions are taking place. Some of the experiments point to D-D fusion with a cominant tritium channel as one of the reactions. The article notes a similarity between Prometheus and the discoveries of cold fusion.

  7. Nattoh model for cold fusion

    SciTech Connect (OSTI)

    Matsumoto, T. . Dept. of Nuclear Engineering)

    1989-12-01

    A hypothetical model, the Nattoh model, is proposed to answer the questions that result from cold fusion experiments. This model proposes the formation of a small cluster of deuterons and examines the feasibility of many-body fusion reactions. The gamma-ray spectrum, heat production, neutron emissions, and fusion products are discussed.

  8. Cold fusion in condensed matter

    SciTech Connect (OSTI)

    Schommers, W.; Politis, C. )

    1989-01-01

    A model for cold fusion in condensed matter is proposed (cold fusion of deuterons in palladium). It is assumed that the palladium-deuterium system forms an alloy, i.e., it is assumed that Pd ions as well as d/sup +/ ions are embedded in an uniform background of negative charge (conduction electrons). The model is based on an interaction potential for deuterons in solid palladium which has been estimated by means of a theoretical picture well known in the physics of liquids. In particular, the following effects are possible: 1. Cold fusion in condensed matter can take place. 2. The observed energy should be larger than that given by the fusion reactions. 3. Hitherto unknown nuclear processes must not be postulated as reported by Fleischmann and Pons. 4. The deuterons are mobile. 5. The deuterons can form close-packed clusters, and in principle a fusion reaction can take place within such a cluster. 6. Not only /sup 3/He should be produced in Pd but possible /sup 4/He too. From their theoretical picture, it can be concluded that experimental results will be strongly dependent on the condition of the materials used in the experiments. This can possible explain that only a part of experiments could show up cold fusion. A well defined condition (lattice defects, different phases, impurities, etc.) of the materials is probably the most critical point in connection with the observation of cold fusion in condensed matter. The effect should also be influenced by lattice dilatations. Experiments with other materials instead of palladium (e.g. vanadium, titanium, lanthanide metals, and different alloys) should be probably more informative.

  9. PHEV Engine Cold Start Emissions Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cold Start Emissions Management PHEV Engine Cold Start Emissions Management Coordination of engine and powertrain supervisory control strategies to minimize cold start emissions ...

  10. Residential Cold Climate Heat Pump (CCHP)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Craig Messmer, craig@unicosystem.com Unico, Inc. Residential Cold Climate Heat Pump (CCHP) ... systems. 3 The Unico Cold Climate Heat Pump (CCHP) * In partnership with the U.S. ...

  11. Advanced energy conversion methods for cold fusion

    SciTech Connect (OSTI)

    Prelas, M.A. )

    1989-09-01

    If cold fusion is verified, then the next important question deals with how it can be used to produce energy. Several direct energy conversion concepts for use with cold fusion are discussed.

  12. Internships for Physics Majors

    Broader source: Energy.gov [DOE]

    Fermilab's IPM program offers ten-week summer internships to outstanding undergraduate physics majors. This program has been developed to familiarize students with opportunities at the frontiers of...

  13. Possible natural cold fusion in the atmosphere

    SciTech Connect (OSTI)

    Hawkins, N. )

    1991-07-01

    Nongeological natural cold fusion effects in meteoroelectrical disequilibria are possible, and various laboratory simulations of these effects are being studied.

  14. Cold fusion anomalies more perplexing than ever

    SciTech Connect (OSTI)

    Dagani, R

    1989-11-01

    This article addresses the debate over research on cold fusion. Analysis is made of the research efforts that have taken place since cold fusion was first thought to have been discovered in Utah. Research in the Soviet Union on the cold fusion phenomenon is also discussed.

  15. The reality of cold fusion

    SciTech Connect (OSTI)

    Case, L.C. )

    1991-12-01

    Despite the unreproducibility, doubt, and controversy involved in the question of the cold fusion of deuterium, enough good data have been published to clearly indicate the reality of some sort of nuclear fusion. Yamaguchi and Niushioka reported a thrice-repeated event in which large amounts of heat and definite bursts of neutrons evolved simultaneously with considerable out-gassing of absorbed deuterium. These results are consistent with nuclear fusion and not with a chemical reaction. In this paper a detailed mechanism is proposed that is consistent with these events and that also generally explains many of the scattered indications of cold fusion that have been reported. There must be an adventitiously large enough presence of tritium to initiate the nuclear reaction. The results of previously successful experiments cannot now be reproduced because currently available D{sub 2}O (and D{sub 2}) is so low in adventitious tritium as to preclude initiation of the nuclear reaction.

  16. Cold cathode vacuum discharge tube

    DOE Patents [OSTI]

    Boettcher, Gordon E.

    1998-01-01

    A cold cathode vacuum discharge tube, and method for making same, with an interior surface of the trigger probe coated with carbon deposited by carbon vapor deposition (CVD) or diamond-like carbon (DLC) deposition. Preferably a solid graphite insert is employed in the probe-cathode structure in place of an aluminum bushing employed in the prior art. The CVD or DLC probe face is laser scribed to allow resistance trimming to match available trigger voltage signals and to reduce electrical aging.

  17. Cold cathode vacuum gauging system

    DOE Patents [OSTI]

    Denny, Edward C. (Knoxville, TN)

    2004-03-09

    A vacuum gauging system of the cold cathode type is provided for measuring the pressure of a plurality of separate vacuum systems, such as in a gas centrifuge cascade. Each casing is fitted with a gauge tube assembly which communicates with the vacuum system in the centrifuge casing. Each gauge tube contains an anode which may be in the form of a slender rod or wire hoop and a cathode which may be formed by the wall of the gauge tube. The tube is provided with an insulated high voltage connector to the anode which has a terminal for external connection outside the vacuum casing. The tube extends from the casing so that a portable magnet assembly may be inserted about the tube to provide a magnetic field in the area between the anode and cathode necessary for pressure measurements in a cold cathode-type vacuum gauge arrangement. The portable magnetic assembly is provided with a connector which engages the external high voltage terminal for providing power to the anode within in the gauge tube. Measurement is made in the same manner as the prior cold cathode gauges in that the current through the anode to the cathode is measured as an indication of the pressure. By providing the portable magnetic assembly, a considerable savings in cost, installation, and maintenance of vacuum gauges for pressure measurement in a gas centrifuge cascade is realizable.

  18. Major Partner Test Sites

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Major Test Partners Once a technology is ready to be tested at pilot or commercial scale, the cost of building a test facility becomes significant -- often beyond the funding ...

  19. EM Major Procurements

    Broader source: Energy.gov [DOE]

    Following is a listing of major procurement actions currently being competed by the Office of Environmental Management.  Information contained in the report is based on publicly available...

  20. Current Status of the WArP Experiment

    SciTech Connect (OSTI)

    Szelc, A. M.

    2009-04-17

    The WArP Collaboration is getting ready to run the WArP 100 liter detector in the Underground laboratory in Gran Sasso, Italy. The new detector, scheduled to run in 2008, should improve the current sensitivity limits by a factor of 10. Meanwhile, an active R and D program is being conducted. The highlights of this program, namely the runs with Argon depleted in the radioactive isotope {sup 39}Ar currently in preparation and the measurements of the effects of contamination with Nitrogen and Oxygen on the Liquid Argon effective light yield will be presented as well as the current status of the 100 liter detector.

  1. Los Alamos turns its nuclear weapons power to war on cancer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Los Alamos turns its nuclear weapons power to war on cancer Los Alamos turns its nuclear weapons power to war on cancer Los Alamos Physicist Eva Birnbaum shows how the laboratory ...

  2. Cold Crucible Induction Melter Technology: Results of Laboratory Directed Research and Development

    SciTech Connect (OSTI)

    Gombert, Dirk; Richardson, John Grant

    2001-09-01

    This report provides a review of cold crucible induction melter (CCIM) technology and presents summaries of alternatives and design issues associated with major system components. The objective in this report is to provide background systems level information relating to development and application of cold crucible induction-heated melter technology for radiological waste processing. Included is a detailed description of the bench-top melter system at the V. G. Khlopin Radium Institute currently being used for characterization testing

  3. Cold cathode vacuum discharge tube

    DOE Patents [OSTI]

    Boettcher, G.E.

    1998-04-14

    A cold cathode vacuum discharge tube, and method for making same, with an interior surface of the trigger probe coated with carbon deposited by chemical vapor deposition (CVD) or diamond-like carbon (DLC) deposition are disclosed. Preferably a solid graphite insert is employed in the probe-cathode structure in place of an aluminum bushing employed in the prior art. The CVD or DLC probe face is laser scribed to allow resistance trimming to match available trigger voltage signals and to reduce electrical aging. 14 figs.

  4. Cold cathode vacuum discharge tube

    DOE Patents [OSTI]

    Boettcher, G.E.

    1998-03-10

    A cold cathode vacuum discharge tube, and method for making same, are disclosed with an interior surface of the trigger probe coated with carbon deposited by carbon vapor deposition (CVD) or diamond-like carbon (DLC) deposition. Preferably a solid graphite insert is employed in the probe-cathode structure in place of an aluminum bushing employed in the prior art. The CVD or DLC probe face is laser scribed to allow resistance trimming to match available trigger voltage signals and to reduce electrical aging. 15 figs.

  5. International workshop on cold neutron sources

    SciTech Connect (OSTI)

    Russell, G.J.; West, C.D. )

    1991-08-01

    The first meeting devoted to cold neutron sources was held at the Los Alamos National Laboratory on March 5--8, 1990. Cosponsored by Los Alamos and Oak Ridge National Laboratories, the meeting was organized as an International Workshop on Cold Neutron Sources and brought together experts in the field of cold-neutron-source design for reactors and spallation sources. Eighty-four people from seven countries attended. Because the meeting was the first of its kind in over forty years, much time was spent acquainting participants with past and planned activities at reactor and spallation facilities worldwide. As a result, the meeting had more of a conference flavor than one of a workshop. The general topics covered at the workshop included: Criteria for cold source design; neutronic predictions and performance; energy deposition and removal; engineering design, fabrication, and operation; material properties; radiation damage; instrumentation; safety; existing cold sources; and future cold sources.

  6. Cleaning up the Legacy of the Cold War: Plutonium Oxides and the Role of Synchrotron Radiation Research

    SciTech Connect (OSTI)

    Clark, David Lewis

    2015-01-21

    The deceptively simple binary formula of AnO2 belies an incredibly complex structural nature, and propensity to form mixed-valent, nonstoichiometric phases of composition AnO2±x. For plutonium, the very formation of PuO2+x has challenged a long-established dogma, and raised fundamental questions for long-term storage and environmental migration. This presentation covers two aspects of Los Alamos synchrotron radiation studies of plutonium oxides: (1) the structural chemistry of laboratory-prepared AnO2+x systems (An = U, Pu; 0 ≤ x ≤ 0.25) determined through a combination of x-ray absorption fine structure spectroscopy (XAFS) and x-ray scattering of laboratory prepared samples; and (2) the application of synchrotron radiation towards the decontamination and decommissioning of the Rocky Flats Environmental Technology Site. Making the case for particle transport mechanisms as the basis of plutonium and americium mobility, rather than aqueous sorption-desorption processes, established a successful scientific basis for the dominance of physical transport processes by wind and water. The scientific basis was successful because it was in agreement with general theory on insolubility of PuO2 in oxidation state IV, results of ultrafiltration analyses of field water/sediment samples, XAFS analyses of soil, sediment, and concrete samples, and was also in general agreement with on-site monitoring data. This understanding allowed Site contractors to rapidly move to application of soil erosion and sediment transport models as the means of predicting plutonium and americium transport, which led to design and application of site-wide soil erosion control technology to help control downstream concentrations of plutonium and americium in streamflow.

  7. Observation of stars produced during cold fusion

    SciTech Connect (OSTI)

    Matsumoto, T. . Dept. of Nuclear Engineering)

    1992-12-01

    It has been indicated tht multiple-neutron nuclei such as quad-neutrons can be emitted during cold fusion. These multiple-neutrons might bombard the nuclei of materials outside a cold fusion cell to cause nuclear reactions. In this paper, observations of nuclear emulsions that were irradiated during a cold fusion experiment with heavy water and palladium foil are described. Various traces, like stars, showing nuclear reactions caused by the multiple-neutrons have been clearly observed.

  8. Evaporative cooling enhanced cold storage system

    DOE Patents [OSTI]

    Carr, P.

    1991-10-15

    The invention provides an evaporatively enhanced cold storage system wherein a warm air stream is cooled and the cooled air stream is thereafter passed into contact with a cold storage unit. Moisture is added to the cooled air stream prior to or during contact of the cooled air stream with the cold storage unit to effect enhanced cooling of the cold storage unit due to evaporation of all or a portion of the added moisture. Preferably at least a portion of the added moisture comprises water condensed during the cooling of the warm air stream. 3 figures.

  9. Evaporative cooling enhanced cold storage system

    DOE Patents [OSTI]

    Carr, Peter (Cary, NC)

    1991-01-01

    The invention provides an evaporatively enhanced cold storage system wherein a warm air stream is cooled and the cooled air stream is thereafter passed into contact with a cold storage unit. Moisture is added to the cooled air stream prior to or during contact of the cooled air stream with the cold storage unit to effect enhanced cooling of the cold storage unit due to evaporation of all or a portion of the added moisture. Preferably at least a portion of the added moisture comprises water condensed during the cooling of the warm air stream.

  10. Major Biomass Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Top Scientists, Industry and Government Leaders to Gather for Major Biomass Conference International gathering to focus on business successes, technology updates, facility tours For more information contact: e:mail: Public Affairs Golden, Colo., Aug. 6, 1997 -- Media are invited to cover the conference in Montreal, Canada. What: Scientists, financiers and industry and government leaders from North America, South America and Europe will focus on building a sustainable, profitable biomass business

  11. Major Partner Test Sites

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Major Test Partners Once a technology is ready to be tested at pilot or commercial scale, the cost of building a test facility becomes significant -- often beyond the funding provided for any one project. It then becomes critical to test the technology at a pre-existing facility willing to test experimental technologies. Not surprisingly, most commercial facilities are hesitant to interfere with their operations to experiment, but others, with a view towards the future, welcome promising

  12. Hewlett and Holl - Atoms for Peace and War | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Holl - Atoms for Peace and War Hewlett and Holl - Atoms for Peace and War Richard G. Hewlett and Jack M. Holl. Atoms for Peace and War: The Eisenhower Administration and the Atomic Energy Commission. A History of the Atomic Energy Commission, Volume III. Text in each PDF is fully searchable. PDF icon HewlettandHollAtomsforPeaceandWarComplete.pdf PDF icon HewlettandHollAtomsforPeaceandWarPicturesOnly.pdf More Documents & Publications A History of the Atomic Energy Commission Hewlett and

  13. Major Program Offices

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    101 Major Program Offices Doing Business with... Energy Efficiency and Renewable Energy Office of Environmental Management National Nuclear Security Administration Office of Science Gary G. Lyttek, Business Source Manager FY2010 DOE Procurement Base: $22.9B $1,556 $5,701 $9,523 $3,793 $2,304 $'s - Millions EE EM NNSA SC Other 2 Presentation for the DOE Small Business Conference EERE Funding Opportunity Announcements (FOA) May 2011 3 Office of Energy Efficiency and Renewable Energy 4 * The

  14. R-Cold: Order (2013-CE-5354)

    Broader source: Energy.gov [DOE]

    DOE ordered R-Cold, Inc. to pay a $8,000 civil penalty after finding R-Cold had failed to certify that any basic models of walk-in cooler or freezer components comply with the applicable energy conservation standards.

  15. Gauss Sum Factorization with Cold Atoms

    SciTech Connect (OSTI)

    Gilowski, M.; Wendrich, T.; Mueller, T.; Ertmer, W.; Rasel, E. M. [Institut fuer Quantenoptik, Leibniz Universitaet Hannover, Welfengarten 1, D-30167 Hannover (Germany); Jentsch, Ch. [Astrium GmbH-Satellites, 88039 Friedrichshafen (Germany); Schleich, W. P. [Institut fuer Quantenphysik, Universitaet Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany)

    2008-01-25

    We report the first implementation of a Gauss sum factorization algorithm by an internal state Ramsey interferometer using cold atoms. A sequence of appropriately designed light pulses interacts with an ensemble of cold rubidium atoms. The final population in the involved atomic levels determines a Gauss sum. With this technique we factor the number N=263193.

  16. EBSD study on crystallographic texture and microstructure development of cold-rolled FePd alloy

    SciTech Connect (OSTI)

    Lin, Hung-Pin; Ng, Tin-San; Kuo, Jui-Chao; Chen, Yen-Chun; Chen, Chun-Liang; Ding, Shi-Xuan

    2014-07-01

    The crystallographic texture and microstructure of FePd alloy after cold-rolling deformation were investigated using electron backscatter diffraction. The major orientations of twin copper and copper after 50% thickness reduction were observed in face-centered cubic-disordered FePd alloy, whereas the main orientation was obtained from brass type after 90% cold rolling. Increase in cold rolling resulted in the change of preferred orientation from copper to brass. Decrease in orientation intensity of copper also increased that of Goss and brass. - Highlights: • The evolution of texture and microstructure in FePd alloy was investigated after cold rolling using EBSD. • Increasing in reduction leads to the change of texture from Copper-type to Brass-type. • The reduction of Copper orientation results in increasing in Goss and Brass orientations.

  17. Afghan Sees Opportunity in Nation's Recovery from War - News Releases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Afghan Sees Opportunity in Nation's Recovery from War Reconstruction Can Allow Country to Develop Sustainable Practices, Deputy Minister Will Tell World Renewable Energy Congress June 28, 2004 Golden, Colo. - The rebuilding of Afghanistan should be an opportunity to develop sustainable standards and practices in construction and energy production and use, Dr. Pir Mohammed Azizi, deputy minister of Irrigation, Water Resources and Environment, is expected to tell participants in the

  18. Psychological responses to the threat of nuclear war

    SciTech Connect (OSTI)

    McClenney, J.E.

    1987-01-01

    A series of three studies explored psychological responses to the threat of nuclear war, and the relationship between attitudes and behavior on this issue. The first was a quasi-experimental study of the influence of exposure to a media depiction of nuclear war, The Day After, on attitudes and behavior, and the influence of such attitudinal variables as denial, perception of control, perception of responsibility, survivability, and spiritual orientation, on the decision to view this film. No effects were found for exposure, but those who experienced a greater sense of control over political events were more likely to view the film. The second study was an experiment on the effects of efficacy enhancing, fear arousing or informational communications, in combination with the previously mentioned attitudinal variables, on retention of relevant information, intentions to act, and political activism on the nuclear arms issue. Fear arousal was found to increase activism for women, but to decrease activism for men. The third study employed structural modeling to examine the relationship between attitudes and behavior on the issue of nuclear war, using data from the experiment. The model supported in this study showed that intentions were directly affected by denial and a sense of power over political events.

  19. New analogies between extreme QCD and cold atoms

    SciTech Connect (OSTI)

    Nishida, Yusuke

    2012-08-15

    We discuss two new analogies between extreme QCD and cold atoms. One is the analogue of 'hard probes' in cold atoms. The other is the analogue of 'quark-hadron continuity' in cold atoms.

  20. EFRC CMSNF Major Accomplishments

    SciTech Connect (OSTI)

    D. Hurley; Todd R. Allen

    2014-09-01

    The mission of the Center for Material Science of Nuclear Fuels (CMSNF) has been to develop a first-principles-based understanding of thermal transport in the most widely used nuclear fuel, UO2, in the presence of defect microstructure associated with radiation environments. The overarching goal within this mission was to develop an experimentally validated multiscale modeling capability directed toward a predictive understanding of the impact of radiation and fission-product induced defects and microstructure on thermal transport in nuclear fuel. Implementation of the mission was accomplished by integrating the physics of thermal transport in crystalline solids with microstructure science under irradiation through multi institutional experimental and computational materials theory teams from Idaho National Laboratory, Oak Ridge National Laboratory, Purdue University, the University of Florida, the University of Wisconsin, and the Colorado School of Mines. The Centers research focused on five major areas: (i) The fundamental aspects of anharmonicity in UO2 crystals and its impact on thermal transport; (ii) The effects of radiation microstructure on thermal transport in UO2; (iii) The mechanisms of defect clustering in UO2 under irradiation; (iv) The effect of temperature and oxygen environment on the stoichiometry of UO2; and (v) The mechanisms of growth of dislocation loops and voids under irradiation. The Center has made important progress in each of these areas, as summarized below.

  1. High-Efficiency Commercial Cold Climate Heat Pump

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Efficiency Commercial Cold Climate Heat Pump 2014 Building Technologies Office Peer ... performance cold climate commercial heat pump system 2) Execute a Technology Readiness ...

  2. High-Efficiency Commercial Cold Climate Heat Pump

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Cold Climate Heat Pump 2016 Building Technologies Office Peer Review Dr. Ahmad ... performance cold climate commercial heat pump system 2) Execute a Technology Readiness ...

  3. High-Efficiency Commercial Cold Climate Heat Pump

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Cold Climate Heat Pump 2015 Building Technologies Office Peer ... performance cold climate commercial heat pump system 2) Execute a Technology Readiness ...

  4. Baby It's Cold Outside: Best Practices for Chilly Climes (101...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Baby It's Cold Outside: Best Practices for Chilly Climes (101) Baby It's Cold Outside: Best Practices for Chilly Climes (101) November 5...

  5. Cold Bay Hot Spring Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    Cold Bay Hot Spring Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Cold Bay Hot Spring Geothermal Area Contents 1 Area Overview 2 History and...

  6. Baby It's Cold Outside: Best Practices for Chilly Climes (101...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Baby It's Cold Outside: Best Practices for Chilly Climes (101) Baby It's Cold Outside: Best Practices for Chilly Climes (101) Better Buildings Residential Network Peer Exchange ...

  7. Centrality, Rapidity And Transverse-Momentum Dependence of Cold...

    Office of Scientific and Technical Information (OSTI)

    Centrality, Rapidity And Transverse-Momentum Dependence of Cold Nuclear Matter Effects on ... Title: Centrality, Rapidity And Transverse-Momentum Dependence of Cold Nuclear Matter ...

  8. Residential Cold Climate Heat Pump with Variable-Speed Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cold Climate Heat Pump with Variable-Speed Technology Residential Cold Climate Heat Pump with Variable-Speed Technology Purdue prototype system Purdue prototype system Unico ...

  9. Cold warriors target arms control (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Cold warriors target arms control Citation Details In-Document Search Title: Cold warriors target arms control While disagreements over the conflict in Bosnia have strained US ...

  10. Religious and Philosophical Justifications for War: A Synthesis of Selected Literature

    SciTech Connect (OSTI)

    Martzen, E

    2000-08-15

    The Critical Issues Forum (CIF) is a cooperative education program supported in part by the Department of Energy's Defense Programs. The Science and Technology Education Program (STEP) at Lawrence Livermore National Laboratory manages one component of this program. CIF engages high school students and teachers regarding issues of the proliferation of weapons of mass destruction, arms control, and international security. These issues are viewed in light of their scientific, economic, socio-cultural, and political/geopolitical influences and implications. This year CIF's focus is on chemical and biological weapons (CBW). CBW is becoming more of a threat today than ever before. Many countries are developing these weapons. CBW also presents certain ethical dilemmas for many individuals, especially if those individuals feel it is their religious duty to use or avoid the use of such weapons. Religion has become an important determining factor in international security because many cultures, and even governments make decisions based on religious traditions. This paper is an attempt to look at these religions and philosophical traditions with an emphasis on views of ''just war''. The ultimate purpose of this paper is to promote awareness about religion's influence on international security issues. This paper was written by Cadet Ernst ''Mitch'' Martzen, AFROTC. He is an intern with the Lawrence Livermore National Laboratory's Science and Technology Education Program, under the guidance of Dr. Stephen C. Sesko, the director of LLNL's CIF program. Every major religion and ethical system has developed a societal concept of ''just war''. Today, the world's largest religions include Christianity, Islam, Hinduism, and Buddhism. Each faith lays claim to a heritage rich with thousands of years of history, and the power of great minds to support its ethical and moral beliefs. These religions have each developed separate and distinct beliefs regarding warfare. Whether those beliefs were developed through formal theological discourse, or through the dialogue in scriptures, they are valid and necessary today because they affect contemporary political action. Even today, many religious societies base their willingness to fight on the just war ethic that they hold.

  11. Cold quark matter in compact stars

    SciTech Connect (OSTI)

    Franzon, B.; Fogaca, D. A.; Navarra, F. S.; Horvath, J. E.

    2013-03-25

    We used an equation of state for the cold quark matter to the study of properties of quark stars. We also discuss the absolute stability of quark matter and compute the mass-radius relation for self-bound stars.

  12. On a weak flavor for cold fusion

    SciTech Connect (OSTI)

    Chatterjee, L. . Dept. of Physics)

    1991-11-01

    In this paper the possibility of recent reports of cold fusion in deuterated metals being manifestations of primal nucleoweak reactions catalyzed by the host environment is investigated. Resulting experimental signatures are predicted.

  13. The possible hot nature of cold fusion

    SciTech Connect (OSTI)

    Kuehne, R.W. )

    1994-03-01

    Based on the model of micro hot fusion, the neutron emission rate of cold fusion is determined without the need for fine-tuning parameters. Moreover, the experimental conditions that are essential to reproduce fusion are determined. 84 refs.

  14. ADR Lunchtime Program: TAKING THE WAR OUT OF WORDS: LEARNING TO COMMUNICATE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WITH NON-DEFENSIVE LANGUAGE | Department of Energy TAKING THE WAR OUT OF WORDS: LEARNING TO COMMUNICATE WITH NON-DEFENSIVE LANGUAGE ADR Lunchtime Program: TAKING THE WAR OUT OF WORDS: LEARNING TO COMMUNICATE WITH NON-DEFENSIVE LANGUAGE Even when using best practices in ADR, clients and other professionals habitually employ reactive and defensive behaviors. Participants will learn significant ways that current ADR prototypes are still systemically rooted in a "war model" for

  15. Los Alamos turns its nuclear weapons power to war on cancer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Los Alamos turns its nuclear weapons power to war on cancer Los Alamos turns its nuclear weapons power to war on cancer Los Alamos Physicist Eva Birnbaum shows how the laboratory is manufacturing a radioactive treatment that targets tumors, without killing the surrounding healthy tissue. December 20, 2015 LANL physicist Eva Birnbaum LANL physicist Eva Birnbaum Los Alamos turns its nuclear weapons power to war on cancer NBC News got exclusive access to Los Alamos National Laboratory where

  16. Toxicity evaluation and hazard review Cold Smoke

    SciTech Connect (OSTI)

    Archuleta, M.M.; Stocum, W.E.

    1993-12-01

    Cold Smoke is a dense white smoke produced by the reaction of titanium tetrachloride and aqueous ammonia aerosols. Early studies on the toxicity of this nonpyrotechnically generated smoke indicated that the smoke itself is essentially non-toxic (i.e. exhibits to systemic toxicity or organ damage due to exposure) under normal deployment conditions. The purpose of this evaluation was to review and summarize the recent literature data available on the toxicity of Cold Smoke, its chemical constituents, and its starting materials.

  17. Cold Facts staff tour JLab's cryogenic, SRF facilities (Cryogenic Society

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of America, Cold Facts) | Jefferson Lab Cold Facts staff tour JLab's cryogenic, SRF facilities (Cryogenic Society of America, Cold Facts) External Link: http://www.cryogenicsociety.org/csa_highlights/cold_facts_tours_jlab_cryogenics_... By jlab_admin on Sat, 2012-05-05

  18. Cold atmospheric plasma in cancer therapy

    SciTech Connect (OSTI)

    Keidar, Michael; Shashurin, Alex; Volotskova, Olga; Ann Stepp, Mary; Srinivasan, Priya; Sandler, Anthony; Trink, Barry

    2013-05-15

    Recent progress in atmospheric plasmas has led to the creation of cold plasmas with ion temperature close to room temperature. This paper outlines recent progress in understanding of cold plasma physics as well as application of cold atmospheric plasma (CAP) in cancer therapy. Varieties of novel plasma diagnostic techniques were developed recently in a quest to understand physics of CAP. It was established that the streamer head charge is about 10{sup 8} electrons, the electrical field in the head vicinity is about 10{sup 7} V/m, and the electron density of the streamer column is about 10{sup 19} m{sup ?3}. Both in-vitro and in-vivo studies of CAP action on cancer were performed. It was shown that the cold plasma application selectively eradicates cancer cells in-vitro without damaging normal cells and significantly reduces tumor size in-vivo. Studies indicate that the mechanism of action of cold plasma on cancer cells is related to generation of reactive oxygen species with possible induction of the apoptosis pathway. It is also shown that the cancer cells are more susceptible to the effects of CAP because a greater percentage of cells are in the S phase of the cell cycle.

  19. Why the Gulf War still matters: Foreign perspectives on the war and the future of international security. Report No. 16

    SciTech Connect (OSTI)

    Garrity, P.J.

    1993-07-01

    This report summarizes the main findings of a Center for National Security Studies (CNSS) project that examined how a number of nations other than the United States have reacted to the course and outcome of the Persian Gulf War of 1991. The project was built around studies of key countries on which the Gulf War might reasonably be expected to have had a significant impact: Argentina, the ASEAN states, Brazil, China, Cuba, Egypt, France, Germany, India, Iran, Iraq, Israel, Italy, Japan, Jordan, Libya, North Korea, Russia, Saudi Arabia, South Korea, Spain, Syria, Taiwan, the United Kingdom, Vietnam, and the states of the former Yugoslavia. These country studies were written by well-recognized independent experts following a common set of guidelines provided by CNSS. When the country studies were completed, they were reviewed and supplemented through a series of peer assessments and workshops. The report represents a synthesis of material generated through this process, and is intended to stimulate thought and further analysis on the critical topics discussed herein.

  20. Cold bond agglomeration of waste oxides for recycling

    SciTech Connect (OSTI)

    D`Alessio, G.; Lu, W.K.

    1996-12-31

    Recycling of waste oxides has been an on-going challenge for integrated steel plants. The majority of these waste oxides are collected from the cleaning systems of ironmaking and steelmaking processes, and are usually in the form of fine particulates and slurries. In most cases, these waste materials are contaminated by oils and heavy metals and often require treatment at a considerable expense prior to landfill disposal. This contamination also limits the re-use or recycling potential of these oxides as secondary resources of reliable quality. However, recycling of some selected wastes in blast furnaces or steelmaking vessels is possible, but first requires agglomeration of the fine particulate by such methods as cold bond briquetting. Cold bond briquetting technology provides both mechanical compacting and bonding (with appropriate binders) of the particulates. This method of recycling has the potential to be economically viable and environmentally sustainable. The nature of the present study is cold bond briquetting of iron ore pellet fines with a molasses-cement-H{sub 2}O binder for recycling in a blast furnace. The inclusion of molasses is for its contribution to the green strength of briquettes. During the curing stage, significant gains in strength may be credited to molasses in the presence of cement. The interactions of cement (and its substitutes), water and molasses and their effects on the properties of the agglomerates during and after various curing conditions were investigated. Tensile strengths of briquettes made in the laboratory and subjected to experimental conditions which simulated the top part of a blast furnace shaft were also examined.

  1. Oil dependence and Thai foreign-policy behavior during the Arab-Israeli war of October 1973

    SciTech Connect (OSTI)

    Keophumihae, S.

    1985-01-01

    The purpose of this study is to explain Thai foreign-policy behavior toward the Arab-Israeli conflict during the Arab oil embargo of 1973-1974 in the wake of the October 1973 War. The major hypothesis is that Thai foreign policy behavior shifted from a neutral to a pro-Arab position after the Arab oil embargo. This shift was motivated by Thai oil-import dependence on OAPEC (Organization of Arab Petroleum Exporting Countries). Oil has assumed an economic as well as a political dimension. Therefore, its political influence over the oil-dependent states cannot be dismissed. Thai foreign-policy behavior in the Arab-Israeli conflict is analyzed through the use of the dependence approach, which contends that external reliance is a potent factor for explaining behavior of actors. Thailand's foreign-policy stand is first delineated through the use of documents containing policy statements by Thai delegates to the United Nations. It was found that although Thai public policy statements were never bluntly anti-Israel, they moved from between neutrality before the oil crisis to a pro-Arab position after the oil crisis of 1973-1974. This shift of Thailand's foreign policy behavior position was then measured against its UN voting records. Results of the voting analysis indicated that the shifting of Thai foreign policy behavior during the October war was motivated by Thailand's oil-import dependence.

  2. Cold Climates Heat Pump Design Optimization

    SciTech Connect (OSTI)

    Abdelaziz, Omar [ORNL] [ORNL; Shen, Bo [ORNL] [ORNL

    2012-01-01

    Heat pumps provide an efficient heating method; however they suffer from sever capacity and performance degradation at low ambient conditions. This has deterred market penetration in cold climates. There is a continuing effort to find an efficient air source cold climate heat pump that maintains acceptable capacity and performance at low ambient conditions. Systematic optimization techniques provide a reliable approach for the design of such systems. This paper presents a step-by-step approach for the design optimization of cold climate heat pumps. We first start by describing the optimization problem: objective function, constraints, and design space. Then we illustrate how to perform this design optimization using an open source publically available optimization toolbox. The response of the heat pump design was evaluated using a validated component based vapor compression model. This model was treated as a black box model within the optimization framework. Optimum designs for different system configurations are presented. These optimum results were further analyzed to understand the performance tradeoff and selection criteria. The paper ends with a discussion on the use of systematic optimization for the cold climate heat pump design.

  3. Cold fusion observed with ordinary water

    SciTech Connect (OSTI)

    Matsumoto, T. )

    1990-05-01

    This paper describes a cold fusion electrolysis experiment using ordinary water. A Ge(Li) detector is used to observe signals up to {approx}130 keV; these signals show the occurrence of fusion reactions in ordinary water. The mechanism for the emission of radiation is discussed by the Nattoh model.

  4. Interference phenomena observed during cold fusion

    SciTech Connect (OSTI)

    Matsumoto, T. )

    1992-03-01

    In this paper the interference phenomena of waves observed during a cold fusion experiment are described. Nuclear emissions have successfully recorded two different interference phenomena of waves from an electrolyzing cell. It is inferred that the waves might be gravitational and antigravitational waves, which can be expected to be radiated from gravity decays of quad-neutrons.

  5. Cold fusion studies in the USSR

    SciTech Connect (OSTI)

    Tsarev, V.A. ); Worledge, D.H. )

    1992-08-01

    In this paper work presented at the first Soviet National Conference on Cold Nuclear Fusion, which took place in March 1991 in Dubna and Moscow, is reviewed. In addition to an integrated view of the experimental and theoretical work, a description is given of some additional contributions that had appeared in the Soviet literature before the conference.

  6. Cold fusion; The story behind the headlines

    SciTech Connect (OSTI)

    Ault, M.R.

    1991-06-01

    This article looks at the cold fusion issue which got a lot of attention in 1989. It provides interesting background information, a brief explanation of the experimental methods and problems encountered, and the basis for some of the controversy. The current state of the research effort is also outlined.

  7. Neutron measurements in search of cold fusion

    SciTech Connect (OSTI)

    Anderson, R.E.; Goulding, C.A.; Johnson, M.W.; Butterfield, K.B.; Gottesfeld, S.; Baker, D.A.; Springer, T.E.; Garzon, F.H.; Bolton, R.D.; Leonard, E.M.; Chancellor, T. )

    1991-05-10

    We have conducted a search for neutron emission from cold fusion systems of the electrochemical type and, to a lesser extent, the high-pressure gas cell type. Using a high-efficiency well counter and an NE 213 scintillator, the experiments were conducted on the earth's surface and in a shielded cave approximately 50 ft underground. After approximately 6500 h of counting time, we have obtained no evidence for cold fusion processes leading to neutron production. However, we have observed all three types of neutron data that have been presented as evidence for cold fusion: large positive fluctuations in the neutron counting rate, weak peaks near 2.5 MeV in the neutron energy spectrum, and bursts of up to 140 neutrons in 500-{mu}s intervals. The data were obtained under circumstances that clearly show our results to be data encountered as a part of the naturally occurring neutron background, which is due primarily to cosmic rays. Thus, observing these types of data does not, of itself, provide evidence for the existence of cold fusion processes. Artifacts in the data that were due to counter misbehavior were also observed to lead to long-term neutron bursts'' whose time duration varied from several hours to several days. We conclude that any experiments which attempt to observed neutron emission must include strong steps to ensure that the experiments deal adequately with both cosmic-ray processes and counter misbehavior.

  8. Could spectator electrons legalize cold fusion

    SciTech Connect (OSTI)

    Chatterjee, L. . Dept. of Physics)

    1990-12-01

    In this paper the possibility of spectator electrons driving cold d-d fusion in condensed matter to an observation threshold is considered, along with the consequences on the branching ratio of the exit channels. The intrinsic dominance of the t-p channel due to the increased phase space is demonstrated.

  9. Nuclear waste vitrification efficiency: cold cap reactions

    SciTech Connect (OSTI)

    Hrma, Pavel R.; Kruger, Albert A.; Pokorny, Richard

    2012-12-15

    The cost and schedule of nuclear waste treatment and immobilization are greatly affected by the rate of glass production. Various factors influence the performance of a waste-glass melter. One of the most significant, and also one of the least understood, is the process of batch melting. Studies are being conducted to gain fundamental understanding of the batch reactions, particularly those that influence the rate of melting, and models are being developed to link batch makeup and melter operation to the melting rate. Batch melting takes place within the cold cap, i.e., a batch layer floating on the surface of molten glass. The conversion of batch to glass consists of various chemical reactions, phase transitions, and diffusion-controlled processes. These include water evaporation (slurry feed contains as high as 60% water), gas evolution, the melting of salts, the formation of borate melt, reactions of borate melt with molten salts and with amorphous oxides (Fe2O3 and Al2O3), the formation of intermediate crystalline phases, the formation of a continuous glass-forming melt, the growth and collapse of primary foam, and the dissolution of residual solids. To this list we also need to add the formation of secondary foam that originates from molten glass but accumulates on the bottom of the cold cap. This study presents relevant data obtained for a high-level-waste melter feed and introduces a one-dimensional (1D) mathematical model of the cold cap as a step toward an advanced three-dimensional (3D) version for a complete model of the waste glass melter. The 1D model describes the batch-to-glass conversion within the cold cap as it progresses in a vertical direction. With constitutive equations and key parameters based on measured data, and simplified boundary conditions on the cold-cap interfaces with the glass melt and the plenum space of the melter, the model provides sensitivity analysis of the response of the cold cap to the batch makeup and melter conditions. The model demonstrates that batch foaming has a decisive influence on the rate of melting. Understanding the dynamics of the foam layer at the bottom of the cold cap and the heat transfer through it appears crucial for a reliable prediction of the rate of melting as a function of the melter-feed makeup and melter operation parameters. Although the study is focused on a batch for waste vitrification, the authors expect that the outcome will also be relevant for commercial glass melting.

  10. NUCLEAR WASTE VITRIFICATION EFFICIENCY COLD CAP REACTIONS

    SciTech Connect (OSTI)

    KRUGER AA; HRMA PR; POKORNY R

    2011-07-29

    The cost and schedule of nuclear waste treatment and immobilization are greatly affected by the rate of glass production. Various factors influence the performance of a waste-glass melter. One of the most significant, and also one of the least understood, is the process of batch melting. Studies are being conducted to gain fundamental understanding of the batch reactions, particularly those that influence the rate of melting, and models are being developed to link batch makeup and melter operation to the melting rate. Batch melting takes place within the cold cap, i.e., a batch layer floating on the surface of molten glass. The conversion of batch to glass consists of various chemical reactions, phase transitions, and diffusion-controlled processes. These include water evaporation (slurry feed contains as high as 60% water), gas evolution, the melting of salts, the formation of borate melt, reactions of borate melt with molten salts and with amorphous oxides (Fe{sub 2}O{sub 3} and Al{sub 2}O{sub 3}), the formation of intermediate crystalline phases, the formation of a continuous glass-forming melt, the growth and collapse of primary foam, and the dissolution of residual solids. To this list we also need to add the formation of secondary foam that originates from molten glass but accumulates on the bottom of the cold cap. This study presents relevant data obtained for a high-level-waste melter feed and introduces a one-dimensional (1D) mathematical model of the cold cap as a step toward an advanced three-dimensional (3D) version for a complete model of the waste glass melter. The 1D model describes the batch-to-glass conversion within the cold cap as it progresses in a vertical direction. With constitutive equations and key parameters based on measured data, and simplified boundary conditions on the cold-cap interfaces with the glass melt and the plenum space of the melter, the model provides sensitivity analysis of the response of the cold cap to the batch makeup and melter conditions. The model demonstrates that batch foaming has a decisive influence on the rate of melting. Understanding the dynamics of the foam layer at the bottom of the cold cap and the heat transfer through it appears crucial for a reliable prediction of the rate of melting as a function of the melter-feed makeup and melter operation parameters. Although the study is focused on a batch for waste vitrification, the authors expect that the outcome will also be relevant for commercial glass melting.

  11. Centrality, Rapidity And Transverse-Momentum Dependence of Cold...

    Office of Scientific and Technical Information (OSTI)

    of Cold Nuclear Matter Effects on JPsi Production in D Au, Cu Cu And Au Au Collisions at ... of Cold Nuclear Matter Effects on JPsi Production in D Au, Cu Cu And Au Au Collisions at ...

  12. Improving Fuel Economy When the Weather's Cold | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Economy When the Weather's Cold Improving Fuel Economy When the Weather's Cold February 25, 2014 - 9:49am Addthis Make sure your car is ready for spring snowstorms. | Photo...

  13. Improving Fuel Economy When the Weather's Cold | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Improving Fuel Economy When the Weather's Cold Improving Fuel Economy When the Weather's Cold February 25, 2014 - 9:49am Addthis Make sure your car is ready for spring snowstorms....

  14. The temperature dependence of ultra-cold neutron wall losses...

    Office of Scientific and Technical Information (OSTI)

    Title: The temperature dependence of ultra-cold neutron wall losses in material bottles coated with deuterated polystryene Ultra-cold neutrons (UCN) from the LANSCE super-thermal ...

  15. Baby It's Cold Outside: Best Practices for Chilly Climes (101)

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Baby It's Cold Outside: Best Practices for Chilly Climes (101)

  16. Advanced Composite Materials for Cold and Cryogenic Hydrogen...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    11:30 Breakout Session II - Processing, Characterization, and Analysis Composite manufacturing processes suitable for cold cryogenic applications Material ...

  17. Builders Challenge Guide to 40% Whole-House Energy Savings in the Cold and Very Cold Climate – Volume 12

    SciTech Connect (OSTI)

    Pacific Northwest National Laboratory

    2011-02-01

    This document describes measures builders can use to construct homes that have whole-house energy savings of 40% in the cold and very cold climate region of the United States.

  18. Major Demonstrations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Major Demonstrations Major Demonstrations A state-of-the-art integrated coal gasification combined-cycle (IGCC) power plant, Tampa Electric's Polk Power Station produces enough electricity to serve 75,000 homes. A state-of-the-art integrated coal gasification combined-cycle (IGCC) power plant, Tampa Electric's Polk Power Station produces enough electricity to serve 75,000 homes. The Office of Fossil Energy is co-funding large-scale demonstrations of clean coal technologies in three different

  19. Palladium metallurgy and cold fusion; Some remarks

    SciTech Connect (OSTI)

    Murr, L.E. )

    1990-04-01

    In this paper the recent confusion surrounding claims for the observation of cold fusion involving palladium electrodes in electrochemical cells containing deuterium might be clarified to some extent if the palladium metallurgy, particularly in the context of fundamental microstructures, are accurately defined. Both the palladium/hydrogen and palladium/deuterium systems have been extensively investigated, and it is asserted more than two decades ago that the palladium/hydrogen system was perhaps the most extensively, experimentally investigated metal/gas system. Ordinary hydrogen absorbed in palladium fused to form helium, while in the 1940's Wilner actually observed the fusion reaction at the center of the current cold fusion controversy: d + d {yields} {sup 3}He + n (where d = {sup 2}H represents a deuteron, and n is a neutron). In the experiment by Wilner, a deuterium-saturated palladium sheet was bombarded with accelerated deuterons. The product neutrons (n) were slowed by paraffin wax and detected by the activation of silver.

  20. Cryogenic target formation using cold gas jets

    DOE Patents [OSTI]

    Hendricks, Charles D. [Livermore, CA

    1980-02-26

    A method and apparatus using cold gas jets for producing a substantially uniform layer of cryogenic materials on the inner surface of hollow spherical members having one or more layers, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on an inner surface of the spherical member. Basically the method involves directing cold gas jets onto a spherical member having one or more layers or shells and containing the cryogenic material, such as a deuterium-tritium (DT) mixture, to freeze the contained material, momentarily heating the spherical member so as to vaporize the contained material, and quickly refreezing the thus vaporized material forming a uniform layer of cryogenic material on an inner surface of the spherical member.

  1. Experiments of one-point cold fusion

    SciTech Connect (OSTI)

    Matsumoto, Takaaki )

    1993-11-01

    Experiments of one-point cold fusion have been performed by electrical discharging in ordinary and heavy water mixed with 0.6 mol/l potassium carbonate. A platinum pin anode was located perpendicular to a copper plate cathode. After discharge, the surfaces of the copper plates were examined by an optical microscope. Many ring spots caused by gravity decay of single and di-neutrons were separately distributed on the plates. Furthermore, several kinds of traces that might be produced by itonic hydrogen clusters and by tiny black and white holes were observed. The mechanisms of cold fusion by electrical discharge are also discussed in terms of the Nattoh model. 13 refs., 12 figs.

  2. Cold fusion catalyzed by muons and electrons

    SciTech Connect (OSTI)

    Kulsrud, R.M.

    1990-10-01

    Two alternative methods have been suggested to produce fusion power at low temperature. The first, muon catalyzed fusion or MCF, uses muons to spontaneously catalyze fusion through the muon mesomolecule formation. Unfortunately, this method fails to generate enough fusion energy to supply the muons, by a factor of about ten. The physics of MCF is discussed, and a possible approach to increasing the number of MCF fusions generated by each muon is mentioned. The second method, which has become known as Cold Fusion,'' involves catalysis by electrons in electrolytic cells. The physics of this process, if it exists, is more mysterious than MCF. However, it now appears to be an artifact, the claims for its reality resting largely on experimental errors occurring in rather delicate experiments. However, a very low level of such fusion claimed by Jones may be real. Experiments in cold fusion will also be discussed.

  3. Cryogenic target formation using cold gas jets

    DOE Patents [OSTI]

    Hendricks, C.D.

    1980-02-26

    A method and apparatus using cold gas jets for producing a substantially uniform layer of cryogenic materials on the inner surface of hollow spherical members having one or more layers, such as inertially imploded targets are disclosed. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on an inner surface of the spherical member. Basically the method involves directing cold gas jets onto a spherical member having one or more layers or shells and containing the cryogenic material, such as a deuterium-tritium (DT) mixture, to freeze the contained material, momentarily heating the spherical member so as to vaporize the contained material, and quickly refreezing the thus vaporized material forming a uniform layer of cryogenic material on an inner surface of the spherical member. 4 figs.

  4. Cryogenic target formation using cold gas jets

    DOE Patents [OSTI]

    Hendricks, Charles D. (Livermore, CA)

    1981-01-01

    A method and apparatus using cold gas jets for producing a substantially uniform layer of cryogenic materials on the inner surface of hollow spherical members having one or more layers, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on an inner surface of the spherical member. Basically the method involves directing cold gas jets onto a spherical member having one or more layers or shells and containing the cryogenic material, such as a deuterium-tritium (DT) mixture, to freeze the contained material, momentarily heating the spherical member so as to vaporize the contained material, and quickly refreezing the thus vaporized material forming a uniform layer of cryogenic material on an inner surface of the spherical member.

  5. The Energy of Star Wars: A Google+ Hangout | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    June 8, 2015 - 12:30pm Addthis Watch every episode of our Energy of Star Wars video series Pat Adams Pat Adams Digital Content Specialist, Office of Public Affairs How can I ...

  6. Cold worked ferritic alloys and components

    DOE Patents [OSTI]

    Korenko, Michael K.

    1984-01-01

    This invention relates to liquid metal fast breeder reactor and steam generator precipitation hardening fully ferritic alloy components which have a microstructure substantially free of the primary precipitation hardening phase while having cells or arrays of dislocations of varying population densities. It also relates to the process by which these components are produced, which entails solution treating the alloy followed by a final cold working step. In this condition, the first significant precipitation hardening of the component occurs during high temperature use.

  7. Combined cold compressor/ejector helium refrigerator

    DOE Patents [OSTI]

    Brown, Donald P.

    1985-01-01

    A refrigeration apparatus having an ejector operatively connected with a cold compressor to form a two-stage pumping system. This pumping system is used to lower the pressure, and thereby the temperature of a bath of boiling refrigerant (helium). The apparatus as thus arranged and operated has substantially improved operating efficiency when compared to other processes or arrangements for achieving a similar low pressure.

  8. Possible ways to achieve cold fusion. III

    SciTech Connect (OSTI)

    Tisenko, Yu.A.

    1994-12-01

    It is suggested that a deuteron {open_quotes}microaccelerator{close_quotes} be constructed in order to achieve cold fusion. This accelerator would operate on the basis of a glow discharge near a charged Pd-D powder grain in low-density gaseous D{sub 2}. Possible parameters of such an accelerator are calculated. The heat released as a result of fusion is estimated, as is the intensity of the deuteron flux.

  9. EPRI News; Update on cold fusion

    SciTech Connect (OSTI)

    Douglas, J.

    1991-05-01

    This paper reports that from instant sensation to virtual pariah, cold fusion has had a stormy history since two University of Utah researchers first announced its discovery in March 1989. Research into this mysterious phenomenon has been plagued both by technical difficulties in replicating experimental results and by sometimes bitter controversy over scientific standards and personal credibility. Now, in a somewhat calmer atmosphere, significant progress is being made through experiments that are reproducible over long periods of time and under a variety of conditions. These experiments indicate that nuclear reactions may indeed occur at room temperature in a crystal lattice in ways not understood before. It's time we stopped calling these reactions cold fusion, says David Worledge, EPRI coordinator of research in this area. There is now good evidence that cold nuclear reaction of some sort are taking place, but also growing indications that they aren't conventional deuterium-deuterium fusion, as first assumed. Also, the cold nuclear reactions inferred from the neutrons that have been detected are not numerous enough to be responsible for the excess heat production still being reported in some experiments. In their original work, University of Utah scientist Martin Fleischmann and Stanley Pons used a simple laboratory apparatus consisting of a palladium rod surrounded by a platinum coil and immersed in heavy water. They reported that when a small electric current was applied to the cells, deuterium nuclei from the heavy water were driven into the palladium rod, where they were held in the metal lattice and apparently fused, producing 4 watts of heat for each watt of electric power supplied.

  10. Review of the `cold fusion` effect

    SciTech Connect (OSTI)

    Storms, E.

    1996-09-01

    More than 190 studies reporting evidence for the `cold fusion` effect are evaluated. New work has answered criticisms by eliminating many of the suggested errors. Evidence for large and reproducible energy generation as well as various nuclear reactions, in addition to fusion, from a variety of environments and methods in accumulating. The field can no longer be dismissed by invoking obvious error or prosaic explanations. 192 refs., 12 figs., 10 tabs.

  11. Possible resonant mechanism of cold fusion

    SciTech Connect (OSTI)

    Zakowicz, W. )

    1991-01-01

    This paper discusses a hypothesis of resonant deuteron-deuteron interaction under cold fusion conditions. The resonance may exist due to a combination of an attractive nuclear interaction at close distances and a repulsive Coulomb potential at large distances. The energy of such resonances may be very low. This effect may increase the reaction cross section and reaction rates in high-density deuteron hydrides.

  12. Cold Vacuum Drying Facility hazard analysis report

    SciTech Connect (OSTI)

    Krahn, D.E.

    1998-02-23

    This report describes the methodology used in conducting the Cold Vacuum Drying Facility (CVDF) hazard analysis to support the CVDF phase 2 safety analysis report (SAR), and documents the results. The hazard analysis was performed in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports, and implements the requirements of US Department of Energy (DOE) Order 5480.23, Nuclear Safety Analysis Reports.

  13. Combined cold compressor/ejector helium refrigerator

    DOE Patents [OSTI]

    Brown, D.P.

    1984-06-05

    A refrigeration apparatus having an ejector operatively connected with a cold compressor to form a two-stage pumping system. This pumping system is used to lower the pressure, and thereby the temperature of a bath of boiling refrigerant (helium). The apparatus as thus arranged and operated has substantially improved operating efficiency when compared to other processes or arrangements for achieving a similar low pressure.

  14. Using a cold radiometer to measure heat loads and survey heat leaks

    SciTech Connect (OSTI)

    DiPirro, M.; Tuttle, J.; Hait, T.; Shirron, P.

    2014-01-29

    We have developed an inexpensive cold radiometer for use in thermal/vacuum chambers to measure heat loads, characterize emissivity and specularity of surfaces and to survey areas to evaluate stray heat loads. We report here the results of two such tests for the James Webb Space Telescope to measure heat loads and effective emissivities of 2 major pieces of optical ground support equipment that will be used in upcoming thermal vacuum testing of the Telescope.

  15. Cold moderator test facilities working group

    SciTech Connect (OSTI)

    Bauer, Guenter S.; Lucas, A. T.

    1997-09-01

    The working group meeting was chaired by Bauer and Lucas.Testing is a vital part of any cold source development project. This applies to specific physics concept verification, benchmarking in conjunction with computer modeling and engineering testing to confirm the functional viability of a proposed system. Irradiation testing of materials will always be needed to continuously extend a comprehensive and reliable information database. An ever increasing worldwide effort to enhance the performance of reactor and accelerator based neutron sources, coupled with the complexity and rising cost of building new generation facilities, gives a new dimension to cold source development and testing programs. A stronger focus is now being placed on the fine-tuning of cold source design to maximize its effectiveness in fully exploiting the facility. In this context, pulsed spallation neutron sources pose an extra challenge due to requirements regarding pulse width and shape which result from a large variety of different instrument concepts. The working group reviewed these requirements in terms of their consequences on the needs for testing equipment and compiled a list of existing and proposed facilities suitable to carry out the necessary development work.

  16. American Material Culture: Investigating a World War II Trash Dump

    SciTech Connect (OSTI)

    Julie Braun

    2005-10-01

    The Idaho National Laboratory: An Historical Trash Trove Historians and archaeologists love trash, the older the better. Sometimes these researchers find their passion in unexpected places. In this presentation, the treasures found in a large historic dump that lies relatively untouched in the middle of the Idaho National Laboratory (INL) will be described. The U.S. military used the central portion of the INL as one of only six naval proving grounds during World War II. They dumped trash in dry irrigation canals during and after their wartime activities and shortly before the federal government designated this arid and desolate place as the nations nuclear reactor testing station in 1949. When read critically and combined with memories and photographs, the 60-year old trash provides a glimpse into 1940s culture and the everyday lives of ordinary people who lived and worked during this time on Idahos desert. Thanks to priceless stories, hours of research, and the ability to read the language of historic artifacts, the dump was turned from just another trash heap into a treasure trove of 1940s memorabilia. Such studies of American material culture serve to fire our imaginations, enrich our understanding of past practices, and humanize history. Historical archaeology provides opportunities to integrate inanimate objects with animated narrative and, the more recent the artifacts, the more human the stories they can tell.

  17. Operations other than war: Requirements for analysis tools research report

    SciTech Connect (OSTI)

    Hartley, D.S. III

    1996-12-01

    This report documents the research effort to determine the requirements for new or improved analysis tools to support decisions at the strategic and operational levels for military Operations Other than War (OOTW). The work was performed for the Commander in Chief, U.S. Pacific Command (USCINCPAC). The data collection was based on workshops attended by experts in OOTWs: analysis personnel from each of the Combatant Commands, the Services, the Office of the Secretary of Defense (OSD), the Joint Staff, and other knowledgeable personnel. Further data were gathered from other workshops and conferences and from the literature. The results of this research begin with the creation of a taxonomy of OOTWs: categories of operations, attributes of operations, and tasks requiring analytical support. The tasks are connected to the Joint Staff`s Universal Joint Task List (UJTL). Historical OOTWs are analyzed to produce frequency distributions by category and responsible CINC. The analysis products are synthesized into a list of requirements for analytical tools and definitions of the requirements. The report concludes with a timeline or roadmap for satisfying the requirements.

  18. War on waste: Can America win its battle with garbage

    SciTech Connect (OSTI)

    Blumberg, L.; Gottlieb, R.

    1989-12-01

    This book provides a comprehensive analysis of the solid waste problem and the major alternatives for a solution to the crisis.

  19. Hadronization measurements in cold nuclear matter

    SciTech Connect (OSTI)

    Dupre, Raphael

    2015-05-01

    Hadronization is the non-perturbative process of QCD by which partons become hadrons. It has been studied at high energies through various processes, we focus here on the experiments of lepto-production of hadrons in cold nuclear matter. By studying the dependence of observables to the atomic number of the target, these experimentscan give information on the dynamic of the hadronization at the femtometer scale. In particular, we will present preliminary results from JLab Hall B (CLAS collaboration), which give unprecedented statistical precision. Then, we will present results of a phenomenological study showing how HERMES data can be described with pure energyloss models.

  20. Barrier Distributions for Cold-Fusion Reactions

    SciTech Connect (OSTI)

    Ikezoe, Hiroshi; Mitsuoka, Shin-ichi; Nishio, Katsuhisa; Tsuruta, Kaoru; Watanabe, Yutaka; Jeong, Sunchan; Satou, Ken-ichiro

    2006-08-14

    Coulomb barrier distributions for the capture process in the cold fusion reactions for 48Ti, 54Cr, 56Fe, 64Ni, 70Zn projectiles incident on 208Pb target are obtained by the measurement of the quasi-elastic scattering cross sections at backward angles. The obtained barrier distributions are compared with the result of a coupled-channels calculation. It is found that the barrier distributions are well reproduced by the calculation taking account of the coupling of one phonon of the quadrupole vibration for these projectile nuclei and two phonons of the octupole vibration for 208Pb.

  1. Methanation process utilizing split cold gas recycle

    DOE Patents [OSTI]

    Tajbl, Daniel G.; Lee, Bernard S.; Schora, Jr., Frank C.; Lam, Henry W.

    1976-07-06

    In the methanation of feed gas comprising carbon monoxide and hydrogen in multiple stages, the feed gas, cold recycle gas and hot product gas is mixed in such proportions that the mixture is at a temperature sufficiently high to avoid carbonyl formation and to initiate the reaction and, so that upon complete reaction of the carbon monoxide and hydrogen, an excessive adiabatic temperature will not be reached. Catalyst damage by high or low temperatures is thereby avoided with a process that utilizes extraordinarily low recycle ratios and a minimum of investment in operating costs.

  2. Axions as hot and cold dark matter

    SciTech Connect (OSTI)

    Jeong, Kwang Sik; Kawasaki, Masahiro; Takahashi, Fuminobu E-mail: kawasaki@icrr.u-tokyo.ac.jp

    2014-02-01

    The presence of a hot dark matter component has been hinted at 3? by a combination of the results from different cosmological observations. We examine a possibility that pseudo Nambu-Goldstone bosons account for both hot and cold dark matter components. We show that the QCD axions can do the job for the axion decay constant f{sub a}?

  3. Major Communications Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Major Communications Reports Major Communications Reports May 18, 2012 Green Button Data: More Power to You May 28, 2009 Major Communications Report May 28, 2009 May 7, 2009 Major Communications Report May 7, 2009 May 5, 2009 Major Communications Report May 5, 2009 April 30, 2009 Major Communications Report April 30, 2009 April 28, 2009 Major Communications Report April 28, 2009 April 17, 2009 Major Communications Report April 17, 2009 March 24, 2009 Major Communications Report March 24, 2009

  4. Major NERSC Maintenance Tuesday November 11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Major NERSC Maintenance Tuesday November 11 Major NERSC Maintenance Tuesday November 11 October 31, 2014 by Francesca Verdier There will be a major NERSC maintenance on Tuesday,...

  5. T-661: ColdFusion Security Hotfix | APSB11-14, ColdFusion Important Update

    Broader source: Energy.gov [DOE]

    Vulnerabilities have been identified in ColdFusion 9.0.1 and earlier versions for Windows, Macintosh and UNIX. These vulnerabilities could lead to a cross-site request forgery (CSRF) or a remote denial-of-service (DoS). Adobe recommends users update their product installation using the instructions provided below.

  6. Actively controlling coolant-cooled cold plate configuration

    DOE Patents [OSTI]

    Chainer, Timothy J.; Parida, Pritish R.

    2015-07-28

    A method is provided to facilitate active control of thermal and fluid dynamic performance of a coolant-cooled cold plate. The method includes: monitoring a variable associated with at least one of the coolant-cooled cold plate or one or more electronic components being cooled by the cold plate; and dynamically varying, based on the monitored variable, a physical configuration of the cold plate. By dynamically varying the physical configuration, the thermal and fluid dynamic performance of the cold plate are adjusted to, for example, optimally cool the one or more electronic components, and at the same time, reduce cooling power consumption used in cooling the electronic component(s). The physical configuration can be adjusted by providing one or more adjustable plates within the coolant-cooled cold plate, the positioning of which may be adjusted based on the monitored variable.

  7. Searching for tiny black holes during cold fusion

    SciTech Connect (OSTI)

    Matsumoto, T. . Dept. of Nuclear Engineering)

    1992-09-01

    A previous technical note suggests that cold fusion is a small-scale simulation of events that occur in cold stars far-away in the universe. Therefore, it is expected that tiny black holes might be produced during cold fusion. In this paper, a search for tiny black holes whose traces might have been recorded on nuclear emulsions is described. Several traces suggesting the production and evaporation of tiny black holes have been successfully observed.

  8. Assessment of cold-climate environmental research priorities

    SciTech Connect (OSTI)

    States, J.B.

    1983-04-01

    The Environmental Protection Agency (EPA) has consistently recognized that cold regions pose unique environmental problems. This report sets forth the conceptual framework and research plans for several high priority research areas. It provides the fundamental basis for implementation of the EPA Cold-Climate Environmental Research Program. This three- to five-year program encompasses both short- and long-term research of high relevance to the EPA and to the cold regions that it serves.

  9. Major Conformed Contract Links | Department of Energy

    Energy Savers [EERE]

    17, 2009 Major Communications Report April 17, 2009 This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of April 17, 2009. Office spreadsheet icon DOE_Major_Communications_04172009.xls More Documents & Publications Major Communications Report May 5, 2009 Major Communications Report April 30, 2009 Major Communications Report April 28

    28, 2009 Major Communications

  10. Independent Oversight Review, Hanford K Basin and Cold Vacuum...

    Broader source: Energy.gov (indexed) [DOE]

    Hanford K Basin and Cold Vacuum Drying Facility Found Fuel Multi-Canister Overpack Operations This report provides the results of an independent oversight review of operations...

  11. Split-System Cold Climate Heat Pump | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Split-System Cold Climate Heat Pump Split-System Cold Climate Heat Pump Photo of the prototype cold climate heat pump outdoor unit, installed at the Ohio field test site in January 2015. <br />Credit: Oak Ridge National Laboratory Photo of the prototype cold climate heat pump outdoor unit, installed at the Ohio field test site in January 2015. Credit: Oak Ridge National Laboratory Lead Performer: Oak Ridge National Laboratory - Oak Ridge, TN Partners: -- Unico Inc. - St. Louis, MO --

  12. Data Collection for Improved Cold Temperature Thermal Modeling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Modeling and Strategy Development Data Collection for Improved Cold Temperature Thermal Modeling and Strategy Development 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle ...

  13. Cold-Start Emissions Control in Hybrid Vehicles Equipped with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Adsorber for Hydrocarbons and NOx Cold-Start Emissions Control in Hybrid Vehicles Equipped with a Passive Adsorber for Hydrocarbons and NOx Reports results from study of ...

  14. Tracing And Quantifying Magmatic Carbon Discharge In Cold Groundwaters...

    Open Energy Info (EERE)

    Tracing And Quantifying Magmatic Carbon Discharge In Cold Groundwaters- Lessons Learned From Mammoth Mountain, USA Jump to: navigation, search OpenEI Reference LibraryAdd to...

  15. COLD-PLASMA ASSISTED GRAFTING OF PAPER

    SciTech Connect (OSTI)

    Gaiolas, C.; Costa, A. P.; Nunes, M.; Silva, M. J. Santos; Belgacem, M. N.

    2008-08-28

    The treatment of cellulose with cold-plasma in the presence of two silanes (vinyltrimethoxysilane and {gamma}-methacryloxypropyltrimethoxysilane) was found to be efficient in grafting of cellulose macromolecules. The occurrence of the grafting was proved by contact angle measurement, ESCA and SEM. Thus, after solvent extraction of the modified substrates, in order to remove unbounded grafts, the polar component of the surface energy of treated samples decreased from 23 mJ/m{sup 2} to practically zero. The ESCA spectra showed the appearance of two new peaks at 102 and 150 eV, relative to the presence of Si atoms and a substantial increase in C1 signal, attributed to the enrichment of the surface by C-H moieties borne by the silanes.

  16. Method for cold stable biojet fuel

    DOE Patents [OSTI]

    Seames, Wayne S.; Aulich, Ted

    2015-12-08

    Plant or animal oils are processed to produce a fuel that operates at very cold temperatures and is suitable as an aviation turbine fuel, a diesel fuel, a fuel blendstock, or any fuel having a low cloud point, pour point or freeze point. The process is based on the cracking of plant or animal oils or their associated esters, known as biodiesel, to generate lighter chemical compounds that have substantially lower cloud, pour, and/or freeze points than the original oil or biodiesel. Cracked oil is processed using separation steps together with analysis to collect fractions with desired low temperature properties by removing undesirable compounds that do not possess the desired temperature properties.

  17. Slurry fired heater cold-flow modelling

    SciTech Connect (OSTI)

    Moujaes, S.F.

    1983-07-01

    This report summarizes the experimental and theoretical work leading to the scale-up of the SRC-I Demonstration Plant slurry fired heater. The scale-up involved a theoretical model using empirical relations in the derivation, and employed variables such as flow conditions, liquid viscosity, and slug frequency. Such variables have been shown to affect the heat transfer characteristics ofthe system. The model assumes that, if all other variables remain constant, the heat transfer coefficient can be scaled up proportional to D/sup -2/3/ (D = inside diameter of the fired heater tube). All flow conditions, liquid viscosities, and pipe inclinations relevant to the demonstration plant have indicated a slug flow regime in the slurry fired heater. The annular and stratified flow regimes should be avoided to minimize the potential for excessive pipe erosion and to decrease temperature gradients along the pipe cross section leading to coking and thermal stresses, respectively. Cold-flow studies in 3- and 6.75-in.-inside-diameter (ID) pipes were conducted to determine the effect of scale-up on flow regime, slug frequency, and slug dimensions. The developed model assumes that conduction heat transfer occurs through the liquid film surrounding the gas slug and laminar convective heat transfer to the liquid slug. A weighted average of these two heat transfer mechanisms gives a value for the average pipe heat transfer coefficient. The cold-flow work showed a decrease in the observed slug frequency between the 3- and 6.75-ID pipes. Data on the ratio of gas to liquid slug length in the 6.75-in. pipe are not yet complete, but are expected to yield generally lower values than those obtained in the 3-in. pipe; this will probably affect the scale-up to demonstration plant conditions. 5 references, 15 figures, 7 tables.

  18. World War II Fuel Shortages Spur Veteran into Action | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    World War II Fuel Shortages Spur Veteran into Action World War II Fuel Shortages Spur Veteran into Action December 16, 2011 - 3:19pm Addthis Dr. Green (top row, third from the right) with his B-29 crew members in Xian, China. | Image courtesy of Dr. Alex Green. Dr. Green (top row, third from the right) with his B-29 crew members in Xian, China. | Image courtesy of Dr. Alex Green. Howard S. Marks Program Analyst On March 12, 1945, the newly-minted U.S. Army Air Corps Operations Analyst Alex E. S.

  19. Cold fusion: The scientific fiasco of the century

    SciTech Connect (OSTI)

    Huizenga, J.R.

    1992-01-01

    A summary of the cold fusion fiasco, its history, claims, experimental questions, are presented in this book. The author gives in some detail good reasons why cold fusion has been disregarded by mainstream science. Disturbing questions about the behavior of scientific investigators and reactions to such events are raised.

  20. Microscopic observations of palladium used for cold fusion

    SciTech Connect (OSTI)

    Matsumoto, T. )

    1991-05-01

    This paper examines the microscopic structures of palladium metals used for cold fusion experiments. Tiny spot defects suggesting cold fusion have been observed in grain boundaries as the Nattoh model predicts. The relationship between these defects and a series of neutron busts and an indirect loop of hydrogen chain reactions are discussed.

  1. Observation of heavy elements produced during explosive cold fusion

    SciTech Connect (OSTI)

    Matsumoto, T.; Kurokawa, K. )

    1991-11-01

    This paper reports on many-body fusion reactions that may take place during cold fusion. Heavy elements are observed that might have been produced by such reactions during electrolysis of heavy water. Elements such as sodium, magnesium, aluminum, and zinc are observed inside grain-shaped defects in a palladium rod used in a cold fusion experiment.

  2. Data Collection for Improved Cold Temperature Thermal Modeling and Strategy

    Broader source: Energy.gov (indexed) [DOE]

    Development | Department of Energy 1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon vss050_jehlik_2011_o.pdf More Documents & Publications Data Collection for Improved Cold Temperature Thermal Modeling Energy Management Strategies for Fast Battery Temperature Rise and Engine Efficiency Improvement at Very Cold Conditions

  3. Chinese attitudes toward nuclear weapons: China and the United States during the Korean War

    SciTech Connect (OSTI)

    Ryan, M.A.

    1986-01-01

    Fundamental Chinese attitudes related to nuclear disarmament and proliferation, civil defense against nuclear attack, and the likely repercussions of nuclear war were set during the Korean War. Chinese viewpoints were heavily influenced by Western writings on nuclear matters from 1945-1950 and were characterized by an integrated military, political, and psychological realism. Previous studies, failing to make use of relevant Chinese-language materials, have neglected this crucial formative period. Both the Truman and Eisenhower administrations considered using nuclear weapons in Korea and China and attempted to shape the political settlement of the war through nuclear threats. The Chinese reaction was notable for its efforts to counteract the effects of fear among its population. They acknowledged the unprecedented destructiveness, not the military decisiveness, of the weapons, but they adamantly denied that nuclear threats would cow them. Chinese propaganda stressed the Soviet deterrent and skillfully appealed to worldwide opposition to nuclear weapons, often utilizing Western spokesmen and playing upon the theme of US misuse of science. The Chinese considered a nuclear attack relatively unlikely but were prepared to absorb an attack and fight a war of long duration. In Korea both the terrain and the extensive tunneling by Chinese troops afforded significant protection from nuclear weapons.

  4. Living in the Nuclear Age: Families and the threat of nuclear war

    SciTech Connect (OSTI)

    Demorest, D.M.

    1991-01-01

    The main interest of this research was to add to the body of knowledge about the possible psychological impact of the nuclear threat on the family unit. Data were utilized from the Family Interaction, Stress and Nuclear War study conducted by Jules Riskin, M.D. and Victoria Dickerson, Ph.D. at the Mental Research Institute in Palo Alto, California. The sample consisted of ten families who were recruited for this study. In order to examine family-interaction variables and the impact of the threat of nuclear war, a standardized semi-structured family interview was conducted. Topics ranged from ordinary activities to external, non-nuclear stresses such as landslides or hurricanes, to the topic of nuclear war. A distinction is drawn between a family's level of nuclear concern while they discuss nuclear issues and a family's level of nuclear concern when viewed in the context of their overall pattern of family communication. In terms of family coping, family nuclear concern was found to be significantly related to two family-coping strategies. Families who utilized the coping strategies of seeking spiritual support and mobilizing the family to acquire and accept help were significantly less concerned about the threat of nuclear war.

  5. Financial News for Major Energy Companies

    Gasoline and Diesel Fuel Update (EIA)

    ... Chemical Operations * Higher margins and sales volumes trebled the earnings of the majors' chemical operations. Earnings from the majors' chemical operations were 202 percent higher ...

  6. Financial News for Major Energy Companies

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Chemical Operations Higher feedstock costs and effects of hurricanes decreased earnings from the majors' chemical operations. Earnings from the majors' chemical operations were 56 ...

  7. OTEC Cold Water Pipe-Platform Sub-System Dynamic Interaction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OTEC Cold Water Pipe-Platform Sub-System Dynamic Interaction Validation (OPPSDIV) OTEC Cold Water Pipe-Platform Sub-System Dynamic Interaction Validation (OPPSDIV) OTEC Cold Water ...

  8. Student attitudes toward the threat of nuclear war: Friends as influential reference persons

    SciTech Connect (OSTI)

    Marasch, M.J.

    1992-01-01

    A renewed interest in research into the psychology of the threat of nuclear war occurred in the past decade as national attention focused increasingly on the arms race between the US and the USSR. Some of this research began the task of exploring the social influences upon attitudes and responses to the nuclear threat. Research on friends as potential influences upon nuclear attitudes was minimal. The present study investigated the role of college friends as potential reference persons in the formation of nuclear attitudes. A battery of questionnaires addressing various nuclear war and non-nuclear war attitudes was completed by 200 student-friend dyads from introductory psychology and sociology courses at the University of North Dakota. Three hypotheses were presented in this study. One hypothesis was that students would perceive their friends as having similar attitudes toward the threat of nuclear war. A second hypothesis was that the actual attitudes between pairs of students and friends would be similar. The third hypothesis was that the attitudes would have become more similar over the course of the development of the friendship (as measured retrospectively). The first hypothesis was borne out by the data. The second and third hypotheses were not supported. There are several implications of the findings. One implication is that the nuclear issue may not be as salient to college students as other, more immediate, issues. Another implication is that a relative lack of communication between college students on political issues precludes more effective mutual influence upon the development and change of such attitudes. A false consensus bias appeared to be operative when the students perceived that their attitudes were similar. Further discussion is presented in regard to past and future psychological research upon nuclear war attitudes.

  9. Cold Nuclear Matter Effects at PHENIX

    SciTech Connect (OSTI)

    Wysocki, Matthew G; PHENIX, Collaboration

    2013-01-01

    While the study of the quark-gluon plasma has been the primary focus of the RHIC experiments, much work has also been done to understand so-called cold nuclear matter (CNM) eects through d+Au collisions where no hot plasma is produced. Eects such as nuclear shadowing, Cronin enhancement, and initial-state parton energy loss, among others, are not only interesting in their own right, but have direct implications on QGP-related measurements in A+A collisions. Recently PHENIX has measured CNM eects at midrapidity in s_NN = 200 GeV d+Au collisions. Measurements of reconstructed jets reveal the centrality dependence of both jet suppression and broadening of the away-side jet. Meanwhile, single electrons from heavy flavor decays exhibit enhancement, increasing with centrality, over a broad p_T range. J/psi and psi' modification have also been measured and are quite dierent in magnitude, in contrast with our expectations. The above results are presented here and compared to our present understanding of CNM effects.

  10. Finite Cosmology and a CMB Cold Spot

    SciTech Connect (OSTI)

    Adler, R.J.; Bjorken, J.D.; Overduin, J.M.; /Stanford U., HEPL

    2006-03-20

    The standard cosmological model posits a spatially flat universe of infinite extent. However, no observation, even in principle, could verify that the matter extends to infinity. In this work we model the universe as a finite spherical ball of dust and dark energy, and obtain a lower limit estimate of its mass and present size: the mass is at least 5 x 10{sup 23}M{sub {circle_dot}} and the present radius is at least 50 Gly. If we are not too far from the dust-ball edge we might expect to see a cold spot in the cosmic microwave background, and there might be suppression of the low multipoles in the angular power spectrum. Thus the model may be testable, at least in principle. We also obtain and discuss the geometry exterior to the dust ball; it is Schwarzschild-de Sitter with a naked singularity, and provides an interesting picture of cosmogenesis. Finally we briefly sketch how radiation and inflation eras may be incorporated into the model.

  11. Letter report: Cold crucible melter assessment

    SciTech Connect (OSTI)

    Elliott, M.L.

    1996-03-01

    One of the activities of the PNL Vitrification Technology Development (PVTD) Project is to assist the Tank Waste Remediation Systems (TWRS) Program in determining which melter systems should be performance tested for potential implementation in the high-level waste (HLW) vitrification plant. The Richland Operations Office (RL) has recommended that the Cold Crucible Melter (CCM) be evaluated as a candidate ``next generation`` melter. As a result, the CCM System Evaluation cost account was established under the PVTD Project so that the CCM could be initially assessed on a high-priority basis. This letter report summarizes a brief initial review and assessment of the CCM. Using the recommendations made in this document, Westinghouse Hanford Company (WHC) and RL will make a decision regarding the urgency of performance testing the CCM. If the decision is favorable, a subcontract will be negotiated for performance testing of a CCM using Hanford HLW simulants in a pilot-scale facility. Because of the aggressive nature of the schedule, the CCM evaluation was not rigorous. The evaluation consisted of a literature review and interviews with proponents of the technology during a recent trip to France. This letter report summarizes the evaluation and makes recommendations regarding further work in this area.

  12. Performance House -- A Cold Climate Challenge Home

    SciTech Connect (OSTI)

    Puttagunta, S.; Grab, J.; Williamson, J.

    2013-08-01

    Working with builder partners on a test homes allows for vetting of whole-house building strategies to eliminate any potential unintended consequences prior to implementing these solution packages on a production scale. To support this research, CARB partnered with Preferred Builders Inc. on a high-performance test home in Old Greenwich, CT. The philosophy and science behind the 2,700 ft2 'Performance House' was based on the premise that homes should be safe, healthy, comfortable, durable, efficient, and adapt with the homeowners. The technologies and strategies used in the 'Performance House' were not cutting-edge, but simply 'best practices practiced'. The focus was on simplicity in construction, maintenance, and operation. When seeking a 30% source energy savings targets over a comparable 2009 IECC code-built home in the cold climate zone, nearly all components of a home must be optimized. Careful planning and design are critical. To help builders and architects seeking to match the performance of this home, a step-by-step guide through the building shell components of DOE's Challenge Home are provided in a pictorial story book. The end result was a DOE Challenge Home that achieved a HERS Index Score of 20 (43 without PV, the minimum target was 55 for compliance). This home was also awarded the 2012 HOBI for Best Green Energy Efficient Home from the Home Builders & Remodelers Association of Connecticut.

  13. Premixed cold reaction cw laser nozzle

    SciTech Connect (OSTI)

    Hook, D.L.; Broadwell, J.E.

    1988-11-15

    This patent describes a combustor for a premixed cold reaction CW chemical laser. The combustor consists of: a combustion chamber, the combustion chamber containing reaction products forming heated primary gas having therein atomic species of an oxidizer, the combustion chamber directing the reaction products to an output plenum; wedges positioned downstream of the output plenum to form a plurality of primary nozzles, each of the primary nozzles having an input section, a throat section, and an output section, the sections forming a supersonic nozzle to output the reaction products as a supersonic gas; secondary injectors having supersonic jets therefrom, the secondary injectors being located on exit walls substantially parallel to the streamlines of the primary nozzles and located downstream of the throat section of the primary nozzles, the secondary injectors being arranged in substantially parallel rows in a streamwise direction, each of the rows having the secondary injectors therein, the secondary injectors in a row comprising groups of secondary injectors, a first group being proximal to the throat section and injecting a diluent, a second group of secondary injectors downstream of the first group and inputting a fuel therein. The secondary injectors are at an acute angle to the exit walls, the acuteness being in the downstream direction.

  14. Preliminary Market Assessment for Cold Climate Heat Pumps

    SciTech Connect (OSTI)

    Sikes, Karen; Khowailed, Gannate; Abdelaziz, Omar

    2011-09-01

    Cold climate heat pump (HP) technology is relevant to a substantial portion of the U.S. population, especially with more than one-third of U.S. housing stock concentrated in colder regions of the country and another 31% in the mixed-humid climate region. Specifically, it is estimated that in 2010 almost 1.37 million heating equipment units were shipped to the cold/very cold climate regions and that 1.41 million were shipped to the nation s mixed-humid region. On a national level, the trend in the last decade has indicated that shipments of gas furnaces have grown at a slower rate than HPs. This indicates a potential opportunity for the cold climate HP, a technology that may be initially slow to penetrate its potential market because of the less expensive operating and first costs of gas furnaces. Anticipated implementation of regional standards could also negatively affect gas furnace shipments, especially with the higher initial cost for more efficient gas furnaces. However, as of 2011, the fact that there are more than 500 gas furnace product models that already achieve the expected efficiency standard indicates that satisfying the regional standard will be a challenge but not an obstacle. A look at the heating fuel and equipment currently being used in the housing stock provides an insight into the competing equipment that cold climate HPs hope to replace. The primary target market for the cold climate HP is the 2.6 million U.S. homes using electric furnaces and HPs in the cold/very cold region. It is estimated that 4.75% of these homeowners either replace or buy new heating equipment in a given year. Accordingly, the project team could infer that the cold climate HP primary market is composed of 123,500 replacements of electric furnaces and conventional air-to-air HPs annually. A secondary housing market for the cold climate HP comprises homes in the mixed-humid region of the country that are using electric furnaces. Homes using gas furnaces across both the cold/very cold and mixed-humid regions represent another secondary market for the cold climate HP. The cold climate HP could also target as a secondary market homes across both the cold/very cold and mixed-humid regions that use propane and fuel oil as their primary heating fuel. The combined total of homes in these three secondary markets is 46 million, and we can also infer that about 2.2 million of these systems are replaced annually. When comparing heating equipment stock in 2001, 2005, and 2009 in the cold/very cold region of the country, it appears that gas furnaces are slowly losing market share and that electric furnaces and HPs are making gains. The fact that electricity-dependent heating equipment is rising in preference among homeowners in the colder regions of the country shows that future penetration of the cold climate HP holds promise. Accordingly, cold climate HP technology could achieve an attractive position, given certain favorable market conditions such as reaching a competitive cost point, strong federal incentives, a consistent level of reliable performance, and a product rollout by a credible market leader. The project team relied on payback analysis to estimate the potential market penetration for the cold climate HP in each of its primary and secondary markets. In this analysis, we assumed a $250 price premium for the cold climate HP over the baseline HP. Electricity and gas prices and emissions were based on the 2010 Buildings Energy Data Book. The average heating load was calculated as 25.2 MMBTU per year in the cold/very cold and mixed-humid regions of the United States. Typical installed costs were obtained from the technical document supporting the U.S. Department of Energy rulemaking. The analysis showed that the cold climate HP will have a 2.2 year payback period when replacing an existing electric HP in the colder regions of the nation. The cold climate HP will have a 6 year payback period when replacing gas furnaces in the same climate regions. Accordingly, we estimated that the cold climate HP will have a penetration ratio ranging between 5% and 35% in its potential primary and secondary markets, resulting in a total annual estimated shipment of 298,000 units to both targeted regions of the nation. Once the cold climate HP technology meets its potential market penetration, it would contribute to annual site energy savings of 3,664,405 MMBTU and a CO2 emission reduction of 470,000 Ton.

  15. Slow Mo Guys and Cold Spray | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Slow Mo Guys and Cold Spray Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Slow Mo Guys and Cold Spray ) The Slow Mo Guys came to GE Global Research in Niskayuna to film our researchers demonstrate a process called "cold spray", in which metal powders are sprayed at high velocities to build a part or add

  16. Energy history chronology from World War II to the present

    SciTech Connect (OSTI)

    Dean, P.C.

    1982-08-01

    This report provides a basic guide to the major Presidential, Legislative, Judicial, and Federal agency actions relating to energy policy, research, development, and regulation in recent years. The chronology is arranged synoptically, allowing users to reference easily the historical context in which each event occurred. Summaries of Presidential, Legislative, and Judicial actions relating to energy, rosters of federal energy officials, and a genealogy of federal energy agencies are also provided in separate appendices. The Energy History Chronology was prepared in conjunction with the History Division's series of pamphlets on the Institutional Origins of the Department of Energy. The series includes concise histories of the Department of Energy, the Energy Research and Development Administration, the Federal Energy Administration, and the Atomic Energy Commission. All significant events and achievements noted in the institutional history are also listed.

  17. Cold Climate Heat Pumps Using Tandem Compressors

    SciTech Connect (OSTI)

    Shen, Bo; Abdelaziz, Omar; Rice, C Keith; Baxter, Van D

    2016-01-01

    In cold climate zones, e.g. ASHRAE climate regions IV and V, conventional electric air-source heat pumps (ASHP) do not work well, due to high compressor discharge temperatures, large pressure ratios and inadequate heating capacities at low ambient temperatures. Consequently, significant use of auxiliary strip heating is required to meet the building heating load. We introduce innovative ASHP technologies as part of continuing efforts to eliminate auxiliary strip heat use and maximize heating COP with acceptable cost-effectiveness and reliability. These innovative ASHP were developed using tandem compressors, which are capable of augmenting heating capacity at low temperatures and maintain superior part-load operation efficiency at moderate temperatures. Two options of tandem compressors were studied; the first employs two identical, single-speed compressors, and the second employs two identical, vapor-injection compressors. The investigations were based on system modeling and laboratory evaluation. Both designs have successfully met the performance criteria. Laboratory evaluation showed that the tandem, single-speed compressor ASHP system is able to achieve heating COP = 4.2 at 47 F (8.3 C), COP = 2.9 at 17 F (-8.3 C), and 76% rated capacity and COP = 1.9 at -13 F (-25 C). This yields a HSPF = 11.0 (per AHRI 210/240). The tandem, vapor-injection ASHP is able to reach heating COP = 4.4 at 47 F, COP = 3.1 at 17 F, and 88% rated capacity and COP = 2.0 at -13 F. This yields a HSPF = 12.0. The system modeling and further laboratory evaluation are presented in the paper.

  18. Cracking a Cold Case and Enduring Mystery | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Call it the ultimate cold case. No crime was committed. But a mystery was waiting to be solved. The critical clues had been buried at sea -- for more than two thousand years. And ...

  19. R-Cold: Proposed Penalty (2013-CE-5354)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that R-Cold, Inc. failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  20. Cold Vacuum Drying (CVD) Facility Diesel Generator Fire Protection

    SciTech Connect (OSTI)

    SINGH, G.

    2000-04-25

    This Acceptance Test Procedure (ATP) has been prepared to demonstrate that the Fire Protection and Detection System installed by Project W-441 (Cold Vacuum Drying Facility and Diesel Generator Building) functions as required by project specifications.

  1. Slower, colder, longer : prospects for a very cold neutron source.

    SciTech Connect (OSTI)

    Micklich, B. J.; Carpenter, J. M.; Intense Pulsed Neutron Source

    2007-01-01

    The motivation for our study is to establish the prospects for a neutron source providing intense pulsed beams with spectra as cold as is realistic. The scientific motivation is to serve applications in nanoscience, biology and technology.

  2. Cold-Start Performance and Emissions Behavior of Alcohol Fuels...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engine Using Transient Hardware-In-Loop Test Meth Cold-Start Performance and Emissions Behavior of Alcohol Fuels in an SIDI Engine Using Transient Hardware-In-Loop Test Meth ...

  3. Building America Technology Solutions for New and Existing Homes: Cold

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Climate Foundation Wall Hygrothermal Research Facility (Fact Sheet) | Department of Energy Cold Climate Foundation Wall Hygrothermal Research Facility (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Cold Climate Foundation Wall Hygrothermal Research Facility (Fact Sheet) This case study describes the University of Minnesota's Cloquet Residential Research Facility (CRRF) in northern Minnesota, which features more than 2,500 ft2 of below-grade space for building

  4. Newly Invented Shielding For Stopping Neutrons Cold | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Newly Invented Shielding For Stopping Neutrons Cold Newly Invented Shielding For Stopping Neutrons Cold NEWPORT NEWS, VA, Dec. 9, 2013 - When faced with the challenge of protecting sensitive scientific equipment and computers from radiation, engineers at the U.S. Department of Energy's Thomas Jefferson National Accelerator Facility decided to take matters into their own hands. They came up with three innovative products that could soon find their way to nuclear power plants, particle

  5. Not Too Hot, Not Too Cold - Continuum Magazine | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Not Too Hot, Not Too Cold Photo by Dennis Schroeder, NREL Not Too Hot, Not Too Cold Thermal management technologies increase vehicle energy efficiency and performance while reducing costs. Mythological character Icarus' melted wings sent him plummeting to earth when he ignored his father's advice and flew too close to the sun. Heat was Icarus' undoing. Today's real-world electric-drive vehicles (EDVs) also require diligent attention to temperature. The battery, power electronic system, electric

  6. Cold Climate Building Enclosure Solutions (Technical Report) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Cold Climate Building Enclosure Solutions Citation Details In-Document Search Title: Cold Climate Building Enclosure Solutions This project investigates the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in triple-deckers and colonial houses, common house types in New England. Several emerging building enclosure technologies were integrated, including high R-value aerogel and vacuum insulations, in forms that would be

  7. Pressure field study of the Tevatron cold compressors

    SciTech Connect (OSTI)

    Klebaner, A.L.; Martinez, A.; Soyars, W.M.; Theilacker, J.C.; /Fermilab

    2003-01-01

    The Fermilab Tevatron cryogenic system utilizes high-speed centrifugal cold compressors, manufactured by Ishikawajima-Harima Heavy Industries Co. Ltd. (IHI), for high-energy operations [1]. The compressor is designed to pump 60 g/sec of 3.6 K saturated helium vapor at a pressure ratio of 2.8, with an off-design range of 40 to 70 g/sec. Operating speeds are between 40 and 95 krpm, with a speed of 80 krpm at the design point. Different heat loads and magnet quench performance of each of the twenty-four satellite refrigerators dictates different process pressure and flow rates of the cold compressors. Reducing the process flow rate can cause the centrifugal cold compressor to stop pumping and subsequently surge. Tests have been conducted at the Cryogenic Test Facility at Fermilab to map the pressure field and appropriate efficiency of the IHI hydrodynamic cold compressor. The information allows tuning of each of the twenty-four Tevatron satellite refrigerators to avoid cold compressor operation near the surge and choke lines. A new impeller has also been tested. The Tevatron cold compressor pressure field and efficiency data with the new impeller are presented in this paper.

  8. Persisting cold extremes under 21st-century warming scenarios

    SciTech Connect (OSTI)

    Kodra, Evan A; Steinhaeuser, Karsten J K; Ganguly, Auroop R

    2011-01-01

    Analyses of climate model simulations and observations reveal that extreme cold events are likely to persist across each land-continent even under 21st-century warming scenarios. The grid-based intensity, duration and frequency of cold extreme events are calculated annually through three indices: the coldest annual consecutive three-day average of daily maximum temperature, the annual maximum of consecutive frost days, and the total number of frost days. Nine global climate models forced with a moderate greenhouse-gas emissions scenario compares the indices over 2091 2100 versus 1991 2000. The credibility of model-simulated cold extremes is evaluated through both bias scores relative to reanalysis data in the past and multi-model agreement in the future. The number of times the value of each annual index in 2091 2100 exceeds the decadal average of the corresponding index in 1991 2000 is counted. The results indicate that intensity and duration of grid-based cold extremes, when viewed as a global total, will often be as severe as current typical conditions in many regions, but the corresponding frequency does not show this persistence. While the models agree on the projected persistence of cold extremes in terms of global counts, regionally, inter-model variability and disparity in model performance tends to dominate. Our findings suggest that, despite a general warming trend, regional preparedness for extreme cold events cannot be compromised even towards the end of the century.

  9. Major Contracts Summary | Department of Energy

    Energy Savers [EERE]

    Contracts Summary Major Contracts Summary PDF icon Major Contracts Summary More Documents & Publications Contractor Fee Payments - Savannah River Operations Office Contractor Fee Payments - Office of River Protection Contractor Fee Payments - Richland Operations Office

  10. Mozambique becomes a major coking coal exporter?

    SciTech Connect (OSTI)

    Ruffini, A.

    2008-06-15

    In addition to its potential role as a major international supplier of coking coal, Mozambique will also become a major source of power generation for southern Africa. 3 figs.

  11. Major Communications Report April 17, 2009

    Broader source: Energy.gov [DOE]

    This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of April 17, 2009.

  12. Report of workshop on radiological effects of nuclear war, SCOPE-ENUWAR workshop, Moscow, USSR, March 21-25, 1988

    SciTech Connect (OSTI)

    Shapiro, C.S.

    1988-03-01

    The workshop on radiological consequences of nuclear war addressed specific issues that built on the foundation of the results that were published in the SCOPE-ENUWAR report (SCOPE-28) in 1986. 14 refs.

  13. Microsoft Word - 10000th_shipment.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For Immediate Release The Department of Energy Announces Major Cold War Legacy Waste Cleanup Milestone Waste Isolation Pilot Plant Receives 10,000th Shipment CARLSBAD, N.M.,...

  14. Risk Removal | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EM has separated Oak Ridge's risk into three major categories: Environmental Risk - During the Manhattan Project and Cold War, Y-12's operations lost as much as 700,000 pounds of ...

  15. Testimony of Secretary Ernest Moniz U.S. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    obviously we have had and are continuing to have major challenges. We have reduced our Cold War legacy "footprint" by 74 percent. But of course, the most complex and difficult...

  16. Energy Media Advisories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department has reached a major milestone in the Department's efforts to clean up the Cold War legacy at the Savannah River Site (SRS) in South Carolina. March 23, 2012...

  17. Building America Best Practices Series: Volume 3; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Cold and Very Cold Climates

    SciTech Connect (OSTI)

    2005-08-01

    The guide book is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the cold and very cold climates.

  18. Prospects for the future development of cold fusion

    SciTech Connect (OSTI)

    Ikegami, H.

    1995-12-01

    Almost five years have passed since the first announcement of cold fusion in March of 1989. Over this period there have been, from time to time, a number of reports of the observation of excess heat and nuclear reactions. Concerning nuclear reactions, there still remains the controversial questions of fusion, which has given its name to the phenomena associated with cold fusion. In any event, so long as the reproducibility remains so poor, it is impossible to resolve such questions and the original controversy has not faded away. From the very beginning of cold fusion, it has been generally conceded among scientists that the claimed excess heat cannot be merely a result of the ordinary DD fusion. Neutron emissions ere extremely weak and sporadic, which made almost nothing of correlation measurements between excess heat and fusion reactions. Another peculiar feature of the nuclear reactions, associated with cold fusion, lies with the observation that the generation of tritium, which is concurrent with neutron emission, is none the less more than ten million times larger than that of the neutrons, and still it is not clear how this relates to the heat. Moreover there are claims that the excess heat production can be correlated to the production of helium-4 as nuclear ashes. These findings have promoted exotic theoretical models to explain cold fusion mechanisms.

  19. COLD WATER VAPOR IN THE BARNARD 5 MOLECULAR CLOUD

    SciTech Connect (OSTI)

    Wirstrm, E. S.; Persson, C. M.; Charnley, S. B.; Cordiner, M. A.; Buckle, J. V.; Takakuwa, S.

    2014-06-20

    After more than 30yr of investigations, the nature of gas-grain interactions at low temperatures remains an unresolved issue in astrochemistry. Water ice is the dominant ice found in cold molecular clouds; however, there is only one region where cold (?10K) water vapor has been detectedL1544. This study aims to shed light on ice desorption mechanisms under cold cloud conditions by expanding the sample. The clumpy distribution of methanol in dark clouds testifies to transient desorption processes at worklikely to also disrupt water ice mantles. Therefore, the Herschel HIFI instrument was used to search for cold water in a small sample of prominent methanol emission peaks. We report detections of the ground-state transition of o-H{sub 2}O (J = 1{sub 10}-1{sub 01}) at 556.9360GHz toward two positions in the cold molecular cloud, Barnard 5. The relative abundances of methanol and water gas support a desorption mechanism which disrupts the outer ice mantle layers, rather than causing complete mantle removal.

  20. Modeling and cold start in alcohol-fueled engines

    SciTech Connect (OSTI)

    Markel, A.J.; Bailey, B.K.

    1998-05-01

    Neat alcohol fuels offer several benefits over conventional gasoline in automotive applications. However, their low vapor pressure and high heat of vaporization make it difficult to produce a flammable vapor composition from a neat alcohol fuel during a start under cold ambient conditions. Various methods have been introduced to compensate for this deficiency. In this study, the authors applied computer modeling and simulation to evaluate the potential of four cold-start technologies for engines fueled by near-neat alcohol. The four technologies were a rich combustor device, a partial oxidation reactor, a catalytic reformer, and an enhanced ignition system. The authors ranked the competing technologies by their ability to meet two primary criteria for cold starting an engine at {minus}25 deg C and also by several secondary parameters related to commercialization. Their analysis results suggest that of the four technologies evaluated, the enhanced ignition system is the best option for further development.

  1. Computer analysis of sodium cold trap design and performance. [LMFBR

    SciTech Connect (OSTI)

    McPheeters, C.C.; Raue, D.J.

    1983-11-01

    Normal steam-side corrosion of steam-generator tubes in Liquid Metal Fast Breeder Reactors (LMFBRs) results in liberation of hydrogen, and most of this hydrogen diffuses through the tubes into the heat-transfer sodium and must be removed by the purification system. Cold traps are normally used to purify sodium, and they operate by cooling the sodium to temperatures near the melting point, where soluble impurities including hydrogen and oxygen precipitate as NaH and Na/sub 2/O, respectively. A computer model was developed to simulate the processes that occur in sodium cold traps. The Model for Analyzing Sodium Cold Traps (MASCOT) simulates any desired configuration of mesh arrangements and dimensions and calculates pressure drops and flow distributions, temperature profiles, impurity concentration profiles, and impurity mass distributions.

  2. Evolution of velocity dispersion along cold collisionless flows

    SciTech Connect (OSTI)

    Banik, Nilanjan; Sikivie, Pierre

    2015-11-17

    We found that the infall of cold dark matter onto a galaxy produces cold collisionless flows and caustics in its halo. If a signal is found in the cavity detector of dark matter axions, the flows will be readily apparent as peaks in the energy spectrum of photons from axion conversion, allowing the densities, velocity vectors and velocity dispersions of the flows to be determined. We also discuss the evolution of velocity dispersion along cold collisionless flows in one and two dimensions. A technique is presented for obtaining the leading behaviour of the velocity dispersion near caustics. The results are used to derive an upper limit on the energy dispersion of the Big Flow from the sharpness of its nearby caustic, and a prediction for the dispersions in its velocity components.

  3. Financial News for Major Energy Companies

    Gasoline and Diesel Fuel Update (EIA)

    Second Quarter 2005 The "Financial News for Major Energy Companies" is issued quarterly to report recent trends in the financial performance of the major energy companies. These include the respondents to Form EIA-28 (Financial Reporting System (FRS)), with the exception of the FRS companies that do not issue quarterly earnings releases or fail to provide separate information for the company's U.S. operations. Twenty-five major energy companies reported overall net income (excluding

  4. Disruption of Hydrogen Bonds between Major Histocompatibility...

    Office of Scientific and Technical Information (OSTI)

    Complex Class II and the Peptide NTerminus Is Not Sufficient to Form a Human Leukocyte Antigen-DM Receptive State of Major Histocompatibility Complex Class II ...

  5. Performance profiles of major energy producers 1989

    SciTech Connect (OSTI)

    Not Available

    1991-01-23

    Performance Profiles of Major Energy Producers 1989 is the thirteenth annual report of the Energy Information Administration's (EIA) Financial Reporting System (FRS). The report examines financial and operating developments, with particular reference to the 23 major energy companies (the FRS companies'') required to report annually on Form EIA-28. Financial information is reported by major lines of business including oil and gas production, petroleum refining and marketing, and other energy operations. Domestic and international operations are examined separately in this report. It also traces key developments affecting the financial performance of major energy companies in 1989, as well as review of important trends.

  6. Financial News for Major Energy Companies

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Chemical Operations * Lower margins and divestitures result in decreased earnings from the majors' chemical operations. Most companies reported lower earnings as the overall result ...

  7. Summary - Major Risk Factors Integrated Facility Disposition...

    Office of Environmental Management (EM)

    Office of Environmental Management (DOE-EM) External Technical Review of the Major Risk Factors Integrated Facility Disposition Project (IFDP) Oak Ridge, TN Why DOE-EM Did...

  8. Argonne's Major Nuclear Energy Milestones | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne's Major Nuclear Energy Milestones Argonne's reactor tree Argonne's reactor tree December 2, 1942: Enrico Fermi's team produces the world's first sustained nuclear chain ...

  9. major-projects | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Major Gasification Projects The Gasification Systems Program sponsors R&D for technology at certain levels of technological maturity. These vary from new technological concepts...

  10. Critical speed measurements in the Tevatron cold compressors

    SciTech Connect (OSTI)

    DeGraff, B.; Bossert, R.; Martinez, A.; Soyars, W.M.; /Fermilab

    2006-01-01

    The Fermilab Tevatron cryogenic system utilizes high-speed centrifugal cold compressors, manufactured by Ishikawajima-Harima Heavy Industries Co. Ltd. (IHI), for high energy operations. Nominal operating range for these compressors is 43,000 to 85,000 rpm. Past foil bearing failures prompted investigation to determine if critical speeds for operating compressors fall within operating range. Data acquisition hardware and software settings will be discussed for measuring liftoff, first critical and second critical speeds. Several tests provided comparisons between an optical displacement probe and accelerometer measurements. Vibration data and analysis of the 20 Tevatron ring cold compressors will be presented.

  11. Semiautomatic cold wire feeder systems increase GTA productivity

    SciTech Connect (OSTI)

    Richardson, M. )

    1995-01-01

    Often, the focus of attempts to increase GTA welding productivity is on studies to determine if justification exists for additional workstations, or for the investment in new fully automated dedicated welding fixtures. Often less costly and simpler solutions can bring about the necessary means to increase production rates and reduce operating costs. For short-run production applications, it is almost impossible to justify the substantial investment in a dedicated automatic fixture. Now, low cost GTA cold wire feeder systems are within the reach of even small shops. The paper views how cold wire equipment has been applied in several GTAW applications to improve results.

  12. Note: High density pulsed molecular beam for cold ion chemistry

    SciTech Connect (OSTI)

    Kokish, M. G.; Rajagopal, V.; Marler, J. P.; Odom, B. C.

    2014-08-15

    A recent expansion of cold and ultracold molecule applications has led to renewed focus on molecular species preparation under ultrahigh vacuum conditions. Meanwhile, molecular beams have been used to study gas phase chemical reactions for decades. In this paper, we describe an apparatus that uses pulsed molecular beam technology to achieve high local gas densities, leading to faster reaction rates with cold trapped ions. We characterize the beam's spatial profile using the trapped ions themselves. This apparatus could be used for preparation of molecular species by reactions requiring excitation of trapped ion precursors to states with short lifetimes or for obtaining a high reaction rate with minimal increase of background chamber pressure.

  13. Cold fusion experiments with ordinary water and thin nickel foil

    SciTech Connect (OSTI)

    Matsumoto, Takaaki )

    1993-11-01

    Cold fusion experiments with ordinary water and thin nickel foils are described. The temperature variation and the surface condition of the foils are examined. It has been proven that ordinary water can produce excess heat. Furthermore, reaction products are recorded on nuclear emulsions. Charged particles, electrons, protons, and deuterons, are observed. Micro-explosions caused by gravity decay of neutron nuclei are also recorded. Many traces indicating tiny black holes and white holes are clearly observed. The mechanisms of cold fusion with ordinary water are discussed in terms of the Nattoh model. 17 refs., 9 figs.

  14. Search for neutrons as evidence of cold fusion

    SciTech Connect (OSTI)

    Cannizzaro, F.; Greco, G.; Raneli, M.; Spitale, M.C.; Tomarchio, E. )

    1992-01-01

    In this paper investigations performed at the University of Palermo in an attempt to reproduce the cold fusion experiment are reported. The search was devoted to detecting neutron emission from palladium electrodes electrolytically charged with deuterium. In no test was neutron emission significantly over the background observed, either in bursts or continuous. Results of a few tests are reported. For the more sensitive test, an upper limit for D(d,n) cold fusion (at 98% confidence level) of {lambda}{sub f} {lt} 3.6 {times} 10{sup {minus}24} fusion/s {center dot} d-d pair is determined.

  15. Expansion of a cold non-neutral plasma slab

    SciTech Connect (OSTI)

    Karimov, A. R.; Yu, M. Y.; Stenflo, L.

    2014-12-15

    Expansion of the ion and electron fronts of a cold non-neutral plasma slab with a quasi-neutral core bounded by layers containing only ions is investigated analytically and exact solutions are obtained. It is found that on average, the plasma expansion time scales linearly with the initial inverse ion plasma frequency as well as the degree of charge imbalance, and no expansion occurs if the cold plasma slab is stationary and overall neutral. However, in both cases, there can exist prominent oscillations on the electron front.

  16. Mr. Frank Archer President Niagara Cold Drawn Steel Corporation

    Office of Legacy Management (LM)

    Department of Energy Washington, DC 20585 FEB 2 1 1991 ' i-. 1,; ' -, f ' + \ 1 : , .J p- * c - Mr. Frank Archer President Niagara Cold Drawn Steel Corporation 110 Hopkins Street P.O. Box 399 Buffalo, NY 14240 Dear Mr. Archer: I have executed the consent forms for the performance of a radiological survey of the Niagara Cold Drawn Steel Corporation's property under the Formerly Utilized Sites Remedial Action Program (FUSRAP) of the U.S. Department of Energy (DOE). I enclose a copy of the consent

  17. Majors' Shift to Natural Gas, The

    Reports and Publications (EIA)

    2001-01-01

    The Majors' Shift to Natural Gas investigates the factors that have guided the United States' major energy producers' growth in U.S. natural gas production relative to oil production. The analysis draws heavily on financial and operating data from the Energy Information Administration's Financial Reporting System (FRS)

  18. Final Report - Spent Nuclear Fuel Retrieval System Manipulator System Cold Validation Testing

    SciTech Connect (OSTI)

    D.R. Jackson; G.R. Kiebel

    1999-08-24

    Manipulator system cold validation testing (CVT) was performed in support of the Fuel Retrieval System (FRS) Sub-Project, a subtask of the Spent Nuclear Fuel Project at the Hanford Site in Richland, Washington. The FRS will be used to retrieve and repackage K-Basin Spent Nuclear Fuel (SNF) currently stored in old K-Plant storage basins. The FRS is required to retrieve full fuel canisters from the basin; clean the fuel elements inside the canister to remove excessive uranium corrosion products (or sludge); remove the contents from the canisters; and sort the resulting debris, scrap, and fuel for repackaging. The fuel elements and scrap will be collected in fuel storage and scrap baskets in preparation for loading into a multi canister overpack (MCO), while the debris is loaded into a debris bin and disposed of as solid waste. The FRS is composed of three major subsystems. The Manipulator Subsystem provides remote handling of fuel, scrap, and debris; the In-Pool Equipment subsystem performs cleaning of fuel and provides a work surface for handling materials; and the Remote Viewing Subsystem provides for remote viewing of the work area by operators. There are two complete and identical FRS systems, one to be installed in the K-West basin and one to be installed in the K-East basin. Another partial system will be installed in a cold test facility to provide for operator training.

  19. Summary Of Cold Crucible Vitrification Tests Results With Savannah River Site High Level Waste Surrogates

    SciTech Connect (OSTI)

    Stefanovsky, Sergey; Marra, James; Lebedev, Vladimir

    2014-01-13

    The cold crucible inductive melting (CCIM) technology successfully applied for vitrification of low- and intermediate-level waste (LILW) at SIA Radon, Russia, was tested to be implemented for vitrification of high-level waste (HLW) stored at Savannah River Site, USA. Mixtures of Sludge Batch 2 (SB2) and 4 (SB4) waste surrogates and borosilicate frits as slurries were vitrified in bench- (236 mm inner diameter) and full-scale (418 mm inner diameter) cold crucibles. Various process conditions were tested and major process variables were determined. Melts were poured into 10L canisters and cooled to room temperature in air or in heat-insulated boxes by a regime similar to Canister Centerline Cooling (CCC) used at DWPF. The products with waste loading from ~40 to ~65 wt.% were investigated in details. The products contained 40 to 55 wt.% waste oxides were predominantly amorphous; at higher waste loadings (WL) spinel structure phases and nepheline were present. Normalized release values for Li, B, Na, and Si determined by PCT procedure remain lower than those from EA glass at waste loadings of up to 60 wt.%.

  20. A review of research in ``cold fusion`` and its impact on energy conservation

    SciTech Connect (OSTI)

    Hurtak, J.J.; Bailey, P.G.

    1995-12-31

    During the past six years, cold fusion enhancement through a variety of research techniques has grown at a rapid rate to the point where it now can be regarded as a major field of endeavor, a second generation heat transfer technology. Observations have been made of deuteron-deuteron (d-d) fusion at room temperature during low voltage electrolytic infusion of deuterons into metallic titanium or palladium electrodes. Neutrons with and energy of approximately 2.5 MeV were with a sensitive neutron spectrometer at a rate of 2 {times} 10{sup {minus}3} n/s, which cannot be accounted for by ambient-neutron background variations. These reactions have been known to yield an excited helium nucleus ({sup 4} He) with approximately 23.8 MeV excess energy, where d+d= {sup 4}He + energy. In most successful experiments, 1% to 50% more heat than the input of electric power into the electrolytic cells has been recorded. These experiments are being successfully repeated on an international basis. Some of these results and various theories proposed to explain this phenomena are presented. Possible applications of ``cold fusion`` technology are given, and its impact on energy conservation is discussed.

  1. Hihan Sapa Wapaha Tate Woilagyapi Owl Feather War Bonnet Wind Farm Rosebud Sioux Tribe

    Energy Savers [EERE]

    Donald Hihan Sapa Wapaha Tate Woilagyapi Owl Feather War Bonnet Wind Farm Rosebud Sioux Tribe Resource Development Office/Tribal Utilities Commission Distributed Generation Systems, Inc. (Disgen) Dept. of Energy Grant DOE Funding $448,551.00 DISGEN Cost share/in-kind $78,750.00 RST/TUC Cost share/in-kind $27,272.00 The Participants: Rosebud Sioux Tribe, Resource Development Phil Two Eagle, Resource Dev. Dir. Ken Haukaas, Wind Farm Coordinator Dr. Bill Akard, Sinte Gleska University, Cultural

  2. MERGING COLD FRONTS IN THE GALAXY PAIR NGC 7619 AND NGC 7626

    SciTech Connect (OSTI)

    Randall, S. W.; Jones, C.; Kraft, R.; Forman, W. R.; O'Sullivan, E.

    2009-05-10

    We present results from Chandra observations of the galaxy pair NGC 7619 and NGC 7626, the two dominant members of the Pegasus group. The X-ray images show a brightness edge associated with each galaxy, which we identify as merger cold fronts. The edges are sharp, and the axes of symmetry of the edges are roughly antiparallel, suggesting that these galaxies are falling toward one another in the plane of the sky. The detection of merger cold fronts in each of the two dominant member galaxies implies a merging subgroup scenario, since the alternative is that the galaxies are falling into a preexisting {approx}1 keV halo without a dominant galaxy of its own, and such objects are not observed. We estimate the three-dimensional velocities from the cold fronts and, using the observed radial velocities of the galaxies, show that the velocity vectors are indeed most likely close to the plane of the sky, with a relative velocity of {approx}1190 km s{sup -1}. The relative velocity is consistent with what is expected from the infall of two roughly equal mass subgroups whose total viral mass equals that of the Pegasus group. We conclude that the Pegasus cluster is most likely currently forming from a major merger of two subgroups, dominated by NGC 7619 and NGC 7626. NGC 7626 contains a strong radio source, consisting of a core with two symmetric jets, and radio lobes. Although we find no associated structure in the X-ray surface brightness map, the temperature map reveals a clump of cool gas just outside the southern lobe, presumably entrained by the lobe, and possibly an extension of cooler gas into the lobe itself. The jet axis is parallel with the projected direction of motion of NGC 7626 (inferred from the symmetry axis of the merger cold front), and the southern leading jet is foreshortened as compared to the northern trailing one, possibly due to the additional ram pressure encountered by the forward jet.

  3. THE COLD AND DARK PROCESS AT THE SAVANNAH RIVER SITE

    SciTech Connect (OSTI)

    Gilmour, J; William Austin, W; Cathy Sizemore, C

    2007-01-31

    The deactivation and decommissioning (D&D) of a facility exposes D&D workers to numerous hazards. One of the more serious hazards is coming into contact to hazardous energy sources (e.g. electrical, pressurized steam). At the Savannah River Site (SRS) a formal process for identifying and eliminating sources of hazardous energy was developed and is called ''Cold & Dark''. Several ''near miss'' events involving cutting of energized conductors during D&D work in buildings thought to be isolated identified the need to have a formal process to identify and isolate these potentially hazardous systems. This process was developed using lessons learned from D&D activities at the Rocky Flats Environmental Technology Site (Rocky Flats) in Colorado. The Cold & Dark process defines an isolation boundary (usually a building perimeter) and then systematically identifies all of the penetrations through this boundary. All penetrations that involve hazardous energy sources are then physically air-gapped. The final product is a documented declaration of isolation performed by a team involving operations, engineering, and project management. Once the Cold & Dark declaration is made for a building work can proceed without the usual controls used in an operational facility (e.g. lockout/tagout, arc flash PPE). It is important to note that the Cold & Dark process does not remove all hazards from a facility. Work planning and controls still need to address hazards that can be present from such things as chemicals, radiological contamination, residual liquids, etc., as well as standard industrial hazards.

  4. Cold Test Operation of the German VEK Vitrification Plant

    SciTech Connect (OSTI)

    Fleisch, J.; Schwaab, E.; Weishaupt, M. [WAK GmbH, Eggenstein-Leopoldshafen (Germany); Gruenewald, W.; Roth, G.; Tobie, W. [Forschungszentrum Karlsruhe, Institut fur Nukleare Entsorgung, Eggenstein-Leopoldshafen (Germany)

    2008-07-01

    In 2007 the German High-Level Liquid Waste (HLLW) Vitrification plant VEK (Verglasungseinrichtung Karlsruhe) has passed a three months integral cold test operation as final step before entering the hot phase. The overall performance of the vitrification process equipment with a liquid-fed ceramic glass melter as main component proved to be completely in line with the requirements of the regulatory body. The retention efficiency of main radioactive-bearing elements across melter and wet off-gas treatment system exceeded the design values distinctly. The strategy to produce a specified waste glass could be successfully demonstrated. The results of the cold test operation allow entering the next step of hot commissioning, i.e. processing of approximately 2 m{sup 3} of diluted HLLW. In summary: An important step of the VEK vitrification plant towards hot operation has been the performance of the cold test operation from April to July 2007. This first integral operation was carried out under boundary conditions and rules established for radioactive operation. Operation and process control were carried out following the procedure as documented in the licensed operational manuals. The function of the process technology and the safe operation could be demonstrated. No severe problems were encountered. Based on the positive results of the cold test, application of the license for hot operation has been initiated and is expected in the near future. (authors)

  5. Fire Hazard Analysis for the Cold Vacuum Drying (CVD) Facility

    SciTech Connect (OSTI)

    JOHNSON, B.H.

    1999-08-19

    This Fire Hazard Analysis assesses the risk from fire within individual fire areas in the Cold Vacuum Drying Facility at the Hanford Site in relation to existing or proposed fire protection features to ascertain whether the objectives of DOE Order 5480.7A Fire Protection are met.

  6. Cold Vacuum Drying (CVD) Facility Design Basis Accident Analysis Documentation

    SciTech Connect (OSTI)

    PIEPHO, M.G.

    1999-10-20

    This document provides the detailed accident analysis to support HNF-3553, Annex B, Spent Nuclear Fuel Project Final Safety Analysis Report, ''Cold Vacuum Drying Facility Final Safety Analysis Report (FSAR).'' All assumptions, parameters and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the FSAR.

  7. Transfer-type products accompanying cold fusion reactions

    SciTech Connect (OSTI)

    Adamian, G.G.; Antonenko, N.V.

    2005-12-15

    Production of nuclei heavier than the target is treated for projectile-target combinations used in cold fusion reactions leading to superheavy nuclei. These products are related to transfer-type or to asymmetry-exit-channel quasifission reactions. The production of isotopes in the transfer-type reactions emitting of {alpha} particles with large energies is discussed.

  8. Review of experimental observations about the cold fusion effect

    SciTech Connect (OSTI)

    Storms, E. )

    1991-12-01

    In this paper the experimental literature describing the cold fusion phenomenon is reviewed. The number and variety of careful experimental measurements of heat, tritium, neutron, and helium production strongly support the occurrence of nuclear reactions in a metal lattice near room temperature as proposed by Pons and Fleischmann and independently by Jones.

  9. Prediction of new particle emission on cold fusion

    SciTech Connect (OSTI)

    Matsumoto, T. . Dept. of Nuclear Engineering)

    1990-12-01

    In this paper the energy distribution of cold fusion products is analyzed based on the Nattoh model. A new hydrogen-catalyzed fusion reaction is proposed to occur in a metal. From the differences in the Q value and other parameters, a new particles, the iton, is predicted to be emitted, with a rest mass 2 to 26 times that of an electron.

  10. Can binuclear atoms solve the cold fusion puzzle

    SciTech Connect (OSTI)

    Cerofolini, G.F. ); Para, A.F. )

    1993-01-01

    The internal and external inconsistencies of cold fusion phenomena are discussed. It is shown that most of these inconsistencies can be removed by assuming the formation of binuclear atoms that have the ability to trap thermal neutrons from the natural background in a localized state. 29 refs., 3 figs.

  11. Some theories of cold nuclear fusion; A review

    SciTech Connect (OSTI)

    Preparata, G. )

    1991-08-01

    In this paper a review is presented of the main theoretical attempts to describe the phenomenology of cold fusion, whose general structure begins to clearly unravel. The main conclusion is that the approaches that are likely to be of relevance must invoke processes where the elementary components (nuclei and electrons) of condensed matter act in a coherent fashion.

  12. Data Collection for Improved Cold Temperature Thermal Modeling | Department

    Broader source: Energy.gov (indexed) [DOE]

    of Energy 2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon vss088_jehlik_2012_p.pdf More Documents & Publications Data Collection for Improved Cold Temperature Thermal Modeling and Strategy Development Advanced Technology Vehicle Lab Benchmarking - Level 2 (in-depth)

  13. The Cold and Dark Process at the Savannah River Site

    SciTech Connect (OSTI)

    Gilmour, John C.; Willis, Michael L.

    2008-01-15

    The deactivation and decommissioning (D and D) of a facility exposes D and D workers to numerous hazards. One of the more serious hazards is coming into contact to hazardous energy sources (e.g. electrical, pressurized steam). At the Savannah River Site (SRS) a formal process for identifying and eliminating sources of hazardous energy was developed and is called 'Cold and Dark'. Several 'near miss' events involving cutting of energized conductors during D and D work in buildings thought to be isolated identified the need to have a formal process to identify and isolate these potentially hazardous systems. This process was developed using lessons learned from D and D activities at the Rocky Flats Environmental Technology Site (Rocky Flats) in Colorado. The Cold and Dark process defines an isolation boundary (usually a building perimeter) and then systematically identifies all of the penetrations through this boundary. All penetrations that involve hazardous energy sources are then physically air-gapped. The final product is a documented declaration of isolation performed by a team involving operations, engineering, and project management. Once the Cold and Dark declaration is made for a building work can proceed without the usual controls used in an operational facility (e.g. lockout/tag-out, arc flash PPE). It is important to note that the Cold and Dark process does not remove all hazards from a facility. Work planning and controls still need to address hazards that can be present from such things as chemicals, radiological contamination, residual liquids, etc., as well as standard industrial hazards. Savannah River Site experienced 6 electrical events prior to declaring a facility 'cold and dark' and has had zero electrical events after 'cold and dark' declaration (263 facilities to date). The formal Cold and Dark process developed at SRS has eliminated D and D worker exposures to hazardous energy sources. Since the implementation of the process there have been no incidents involving energized conductors or pressurized liquids/gases. During this time SRS has demolished over 200 facilities. The ability to perform intrusive D and D activities without the normal controls such as lock outs results in shorter schedule durations and lower overall costs for a facility D and D.

  14. Performance profiles of major energy producers 1994

    SciTech Connect (OSTI)

    1996-02-01

    Performance Profiles of Major Energy Producers 1994 is the eighteenth annual report of the Energy Information Administration`s (EIA) Financial Reporting System (FRS). The report examines financial and operating developments in energy markets, with particular reference to the 24 major U.S. energy companies required to report annually on Form EIA-28. Financial information is reported by major lines of business, including oil and gas production, petroleum refining and marketing, other energy operations, and nonenergy businesses. Financial and operating results are presented in the context of energy market developments with a view toward identifying changing corporate strategies and measuring the performance of ongoing operations both in the United States and abroad.

  15. Major NERSC Maintenance Tuesday November 11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Major NERSC Maintenance Tuesday November 11 Major NERSC Maintenance Tuesday November 11 October 31, 2014 by Francesca Verdier There will be a major NERSC maintenance on Tuesday, November 11, from 08:00 until 18:00 PST. Several systems and services will be unavailable during this time. Edison, Hopper, Data Transfer nodes, and Science Gateway (data portal) nodes will be unavailable 08:00 - 13:00. Carver/Dirac, PDSF, and Genepool will be unavailable 08:00 - 18:00. HPSS and web servers

  16. PIA - WEB Physical Security Major Application | Department of...

    Energy Savers [EERE]

    PIA - WEB Physical Security Major Application PIA - WEB Physical Security Major Application PIA - WEB Physical Security Major Application PDF icon PIA - WEB Physical Security Major...

  17. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Cold Climates

    SciTech Connect (OSTI)

    Building Industry Research Alliance; Building Science Consortium; Consortium for Advanced Residential Buildings; Florida Solar Energy Center; IBACOS; National Renewable Energy Laboratory

    2006-08-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in Cold Climates on a cost-neutral basis.

  18. Performance profiles of major energy producers 1993

    SciTech Connect (OSTI)

    1995-01-01

    Performance Profiles of Major Energy Producers 1993 is the seventeenth annual report of the Energy Information Administration`s (EIA) Financial Reporting System (FRS). The report examines financial and operating developments in energy markets, with particular reference to the 25 major US energy companies required to report annually on Form EIA-28. Financial information is reported by major liens of business, including oil and gas production, petroleum refining and marketing, other energy operations, and nonenergy businesses. Financial and operating results are presented in the context of energy market developments with a view toward identifying changing corporate strategies and measuring the performance of ongoing operations both in the US and abroad. This year`s report analyzes financial and operating developments for 1993 (Part 1: Developments in 1993) and also reviews key developments during the 20 years following the Arab Oil Embargo of 1973--1974 (Part 2: Major Energy Company Strategies Since the Arab Oil Embargo). 49 figs., 104 tabs.

  19. Performance profiles of major energy producers 1996

    SciTech Connect (OSTI)

    1998-01-01

    This publication examines developments in the operations of the major US e energy-producing companies on a corporate level, by major line of business, by major function within each line of business, and by geographic area. In 1996, 24 companies filed Form EIA-28. The analysis and data presented in this report represents the operations of the Financial Reporting System companies in the context of their worldwide operations and in the context of the major energy markets which they serve. Both energy and nonenergy developments of these companies are analyzed. Although the focus is on developments in 1996, important trends prior to that time are also featured. Sections address energy markets in 1996; key financial developments; oil and gas exploration, development, and production; downstream petroleum in 1996; coal and alternative energy; and foreign direct investment in US energy. 30 figs., 104 tabs.

  20. Recent NERSC User Publications in Major Journals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recent NERSC User Publications in Major Journals Recent NERSC User Publications in Major Journals Proceedings of the National Academy of Sciences Amarnath, Kapil, et al. "Multiscale model of light harvesting by photosystem II in plants." Proceedings of the National Academy of Sciences (2016): 201524999. Huang, Shin-Ming, et al. "New type of Weyl semimetal with quadratic double Weyl fermions." Proceedings of the National Academy of Sciences (2016): 201514581. Hudson, William

  1. Major Subcontractors Consortium sharpens its focus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Major Subcontractors Consortium sharpens its focus Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:May 2016 all issues All Issues » submit Major Subcontractors Consortium sharpens its focus Area businesses gain more value in MSC collaboration with Lab in 2016. April 4, 2016 Picuris Pueblo among non-profits receving MSC grant Picuris Pueblo was among the non-profits that received an MSC grant in 2015. In the past 10 years, 42 separate

  2. Assessment of damage to the desert surfaces of Kuwait due to the Gulf War

    SciTech Connect (OSTI)

    El-Baz, F. . Center for Remote Sensing); Al-Ajmi, D. . Environmental and Earth Sciences Div.)

    1993-01-01

    This is a preliminary report on a joint research project by Boston University and the Kuwait Institute for Scientific Research that commenced in April 1992. The project aim is to establish the extent and nature of environmental damage to the desert surface and coastal zone of Kuwait due to the Gulf War and its aftermath. Change detection image enhancement techniques were employed to enhance environmental change by comparison of Landsat Thematic Mapper images obtained before the wars and after the cessation of the oil and well fires. Higher resolution SPOT images were also utilized to evaluate the nature of the environmental damage to specific areas. The most prominent changes were due to: (1) the deposition of oil and course-grained soot on the desert surface as a result of oil rain'' from the plume that emanated from the oil well fires; (2) the formation of hundreds of oil lakes, from oil seepage at the damaged oil well heads; (3) the mobilization of sand and dust and (4) the pollution of segments of the coastal zone by the deposition of oil from several oil spills. Interpretation of satellite image data are checked in the field to confirm the observations, and to assess the nature of the damage. Final results will be utilized in establishing the needs for remedial action to counteract the harmful effects of the various types of damage to the environment of Kuwait.

  3. Nuclear education campaign: on how to eliminate the threat of nuclear war

    SciTech Connect (OSTI)

    Markusen, E.; Dunham, J.; Bee, R.

    1981-05-01

    The threat of a nuclear war creates a chronic erosion of moral and intellectual integrity and places the future of humanity in the hands of a few hundred people. The nuclear elite probably requires a degree of psychological numbing and desensitization in order to separate themselves emotionally from decisions that might require exercise of their power. They may also lose the ability to question basic assumptions and may identify themselves with the rightness of their policies and the need to use nuclear technology to preserve those policies. To reform the nuclear-industrial complex, the American public must become educated to give the prevention of nuclear war a higher priority than the economy. Fears and anxieties may underlie apparent apathy, taking the form of denial and a focus on immediate problems. A campaign by knowledgeable people to educate the public should stress the empirical data necessary for objectivity and should use a multidisciplinary approach in the same way that recent death education programs have broken the taboos about discussing the Nazi holocaust. An outline of a nuclear-education program suggests a number of social and economic benefits. 13 references. (DCK)

  4. V-045: Adobe ColdFusion Lets Local Users Bypass Sandbox Restrictions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: Adobe ColdFusion Lets Local Users Bypass Sandbox Restrictions V-045: Adobe ColdFusion Lets Local Users Bypass Sandbox Restrictions December 12, 2012 - 2:00am Addthis PROBLEM:...

  5. U-257: Adobe ColdFusion Unspecified Bug Lets Remote Users Deny...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7: Adobe ColdFusion Unspecified Bug Lets Remote Users Deny Service U-257: Adobe ColdFusion Unspecified Bug Lets Remote Users Deny Service September 12, 2012 - 6:00am Addthis...

  6. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project...

    Energy Savers [EERE]

    Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility ...

  7. DOE Announces Strategic Engineering and Technology Roadmap for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategic Engineering and Technology Roadmap for Cleanup of Cold War Era Nuclear Waste DOE Announces Strategic Engineering and Technology Roadmap for Cleanup of Cold War Era ...

  8. Independent Oversight Review, Hanford K Basin and Cold Vacuum Drying Facility- August 2012

    Broader source: Energy.gov [DOE]

    Review of Hanford K Basin and Cold Vacuum Drying Facility Found Fuel Multi-Canister Overpack Operations

  9. Performance profiles of major energy producers 1992

    SciTech Connect (OSTI)

    Not Available

    1994-01-13

    Performance Profiles of Major Energy Producers 1992 is the sixteenth annual report of the Energy Information Administration`s (EIA) Financial Reporting System (FRS). The report examines financial and operating developments, with particular reference to the 25 major energy companies (the FRS companies) required to report annually on Form EIA-28. Financial information is reported by major lines of business, including oil and gas production, petroleum refining and marketing, and other energy operations. Domestic and international operations are examined separately in this report. The data are presented in the context of key energy market developments with a view toward identifying changing strategies of corporate development and measuring the apparent success of current ongoing operations.

  10. Strategies of the major oil companies

    SciTech Connect (OSTI)

    Greene, W.N.

    1982-01-01

    This study identifies, documents, and analyzes the strategies of the seven largest oil companies in the world, collectively called the Majors (Exxon, Shell, Gulf, Mobil, Socal, Texaco, and BP). The period covered for each company begins at its origin, generally near 1900, and concludes in 1976. This study documents and analyzes all the major components of the long-term strategies of these companies since their origins. The policy components of each company's strategy are classified into six categories where major changes have occurred in the growth of the large-scale firm. These policy categories are geographic exapansion, size/scale of operations, vertical integration, horizontal combination, product and industry diversification, and administrative structure. With each category, policies can be compared between firms and overtime to illustrate similarities, differences, and changes in strategy. The main results are discussed.

  11. Formation of superheavy nuclei in cold fusion reactions

    SciTech Connect (OSTI)

    Feng Zhaoqing; Jin Genming; Li Junqing; Scheid, Werner

    2007-10-15

    Within the concept of the dinuclear system (DNS), a dynamical model is proposed for describing the formation of superheavy nuclei in complete fusion reactions by incorporating the coupling of the relative motion to the nucleon transfer process. The capture of two heavy colliding nuclei, the formation of the compound nucleus, and the de-excitation process are calculated by using an empirical coupled channel model, solving a master equation numerically and applying statistical theory, respectively. Evaporation residue excitation functions in cold fusion reactions are investigated systematically and compared with available experimental data. Maximal production cross sections of superheavy nuclei in cold fusion reactions with stable neutron-rich projectiles are obtained. Isotopic trends in the production of the superheavy elements Z=110, 112, 114, 116, 118, and 120 are analyzed systematically. Optimal combinations and the corresponding excitation energies are proposed.

  12. Observation of meshlike traces on nuclear emulsions during cold fusion

    SciTech Connect (OSTI)

    Matsumoto, Takaaki )

    1993-01-01

    Cold fusion products from the electrolysis of heavy water have been directly measured by using a thin palladium foil. Several anomalous traces have been clearly recorded on nuclear emulsions. Some traces have meshlike structures, which are classified into two types: (a) ones associated with ring traces that are caused by the gravity decay of quad-neutrons and (b) ones with no ring traces. The mechanisms that form these meshlike traces are discussed in terms of the Nattoh model. It is inferred that multiple-neutron nuclei such as quad-neutrons, covered by itonic mesh and iton beads, are born during cold fusion. Furthermore, other anomalous traces suggest the production of a new heavy particle during gravity decay. 14 refs., 10 figs.

  13. Reproducible cold fusion reaction using a complex cathode

    SciTech Connect (OSTI)

    Arata, Y.; Zhang, Y.C. )

    1992-09-01

    This paper discusses a new complex cathode which was developed, consisting of a nickel (or palladium) rod with a palladium layer applied by plasma spraying. High reproducibility of a cold fusion reaction is confirmed by using this cathode. The palladium layer activates the surface functions of the deuterated cathode, and reliable evidence is obtained that a new type of heat generation occurred in the complex cathode.

  14. U-060: Security update: Hotfix available for ColdFusion

    Broader source: Energy.gov [DOE]

    Vulnerabilities have been identified in ColdFusion 9.0.1 and earlier versions for Windows, Macintosh and UNIX. These vulnerabilities could lead to a cross-site scripting attack. Adobe categorizes this as an important update and recommends that users apply the latest update for their product installation.This update resolves a cross-site scripting vulnerability in cfform tag (CVE-2011-2463). This update resolves a cross-site scripting vulnerability in RDS (CVE-2011-4368).

  15. Viscoelastic modes in a strongly coupled, cold, magnetized dusty plasma

    SciTech Connect (OSTI)

    Banerjee, Debabrata; Mylavarapu, Janaki Sita; Chakrabarti, Nikhil

    2010-11-15

    A generalized hydrodynamical model has been used to study the low frequency modes in a strongly coupled, cold, magnetized dusty plasma. Such plasmas exhibit elastic properties due to the strong correlations among dust particles and the tensile stresses imparted by the magnetic field. It has been shown that longitudinal compressional Alfven modes and elasticity modified transverse shear mode exist in such a medium. The features of these collective modes are established and discussed.

  16. Quantum Theory for Cold Avalanche Ionization in Solids

    SciTech Connect (OSTI)

    Deng, H. X.; Zu, X. T.; Xiang, X.; Sun, K.

    2010-09-10

    A theory of photon-assisted impact ionization in solids is presented. Our theory makes a quantum description of the new impact ionization--cold avalanche ionization recently reported by P. P. Rajeev, M. Gertsvolf, P. B. Corkum, and D. M. Rayner [Phys. Rev. Lett. 102, 083001 (2009)]. The present theory agrees with the experiments and can be reduced to the traditional impact ionization expression in the absence of a laser.

  17. Cold Vacuum Drying (CVD) Facility Hazards Analysis Report

    SciTech Connect (OSTI)

    CROWE, R.D.

    2000-08-07

    This report describes the methodology used in conducting the Cold Vacuum Drying Facility (CVDF) Hazard Analysis to support the CVDF Final Safety Analysis Report and documents the results. The hazard analysis was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports,'' and implements the requirements of DOE Order 5480.23, ''Nuclear Safety Analysis Reports.''

  18. Searching for WISPy cold dark matter with a dish antenna

    SciTech Connect (OSTI)

    Horns, Dieter; Jaeckel, Joerg; Lindner, Axel; Ringwald, Andreas; Lobanov, Andrei; Redondo, Javier E-mail: jjaeckel@thphys.uni-heidelberg.de E-mail: alobanov@mpifr-bonn.mpg.de E-mail: andreas.ringwald@desy.de

    2013-04-01

    The cold dark matter of the Universe may be comprised of very light and very weakly interacting particles, so-called WISPs. Two prominent examples are hidden photons and axion-like particles. In this note we propose a new technique to sensitively search for this type of dark matter with dish antennas. The technique is broadband and allows to explore a whole range of masses in a single measurement.

  19. Cold Vacuum Drying facility design basis accident analysis documentation

    SciTech Connect (OSTI)

    CROWE, R.D.

    2000-08-08

    This document provides the detailed accident analysis to support HNF-3553, Annex B, Spent Nuclear Fuel Project Final Safety Analysis Report (FSAR), ''Cold Vacuum Drying Facility Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the FSAR. The calculations in this document address the design basis accidents (DBAs) selected for analysis in HNF-3553, ''Spent Nuclear Fuel Project Final Safety Analysis Report'', Annex B, ''Cold Vacuum Drying Facility Final Safety Analysis Report.'' The objective is to determine the quantity of radioactive particulate available for release at any point during processing at the Cold Vacuum Drying Facility (CVDF) and to use that quantity to determine the amount of radioactive material released during the DBAs. The radioactive material released is used to determine dose consequences to receptors at four locations, and the dose consequences are compared with the appropriate evaluation guidelines and release limits to ascertain the need for preventive and mitigative controls.

  20. Surge recovery techniques for the Tevatron cold compressors

    SciTech Connect (OSTI)

    Martinez, A.; Klebaner, A.L.; Makara, J.N.; Theilacker, J.C.; /Fermilab

    2006-01-01

    The Fermilab Tevatron cryogenic system utilizes high-speed centrifugal cold compressors, made by Ishikawajima-Harima Heavy Industries Co. Ltd. (IHI), for high-energy operations [1]. The compressor is designed to pump 60 g/s of 3.6 K saturated helium vapor at a pressure ratio of 2.8, with an off-design range of 40 to 70 g/s and operating speeds between 40 and 95 krpm. Since initial commissioning in 1993, Tevatron transient conditions such as quench recovery have led to multiple-location machine trips as a result of the cold compressors entering the surge regime. Historically, compressors operating at lower inlet pressures and higher speeds have been especially susceptible to these machine trips and it was not uncommon to have multiple compressor trips during large multiple-house quenches. In order to cope with these events and limit accelerator down time, surge recovery techniques have been implemented in an attempt to prevent the compressors from tripping once the machine entered this surge regime. This paper discusses the different methods of surge recovery that have been employed. Data from tests performed at the Cryogenic Test Facility at Fermilab as well as actual Tevatron operational data were utilized. In order to aid in the determination of the surge region, a full mapping study was undertaken to characterize the entire pressure field of the cold compressor. These techniques were then implemented and tested at several locations in the Tevatron with some success.

  1. Performance Profiles of Major Energy Producers

    Reports and Publications (EIA)

    2011-01-01

    The information and analyses in Performance Profiles of Major Energy Producers is intended to provide a critical review, and promote an understanding, of the possible motivations and apparent consequences of investment decisions made by some of the largest corporations in the energy industry.

  2. Poisonous gas and the american expeditionary forces in World War I: Is it still 1918. Monograph

    SciTech Connect (OSTI)

    Bailey, D.W.

    1992-12-06

    This monograph investigates the uses and effects of chemical weapons used on units. The doctrine and technology available today are compared to those available and used by the American Expeditionary Forces (AEF) during World War One. The monograph first discusses the development and use of gas during WWI. Specifically, five case studies are presented representing the offensive and defensive use of gas as seen by AEF units. Each case is then analyzed using the battlefield operating systems (BOS). Lessons learned are then extracted from the case studies. Today's doctrine is then analyzed using these lessons learned to determine if the US is any better prepared to fight in a chemical environment today than it was at the end of WWI.

  3. 2007 TY430: A COLD CLASSICAL KUIPER BELT TYPE BINARY IN THE PLUTINO POPULATION

    SciTech Connect (OSTI)

    Sheppard, Scott S.; Ragozzine, Darin; Trujillo, Chadwick

    2012-03-15

    Kuiper Belt object 2007 TY430 is the first wide, equal-sized, binary known in the 3:2 mean motion resonance with Neptune. The two components have a maximum separation of about 1 arcsec and are on average less than 0.1 mag different in apparent magnitude with identical ultra-red colors (g - i = 1.49 {+-} 0.01 mag). Using nearly monthly observations of 2007 TY430 from 2007 to 2011, the orbit of the mutual components was found to have a period of 961.2 {+-} 4.6 days with a semi-major axis of 21000 {+-} 160 km and eccentricity of 0.1529 {+-} 0.0028. The inclination with respect to the ecliptic is 15.68 {+-} 0.22 deg and extensive observations have allowed the mirror orbit to be eliminated as a possibility. The total mass for the binary system was found to be 7.90 {+-} 0.21 Multiplication-Sign 10{sup 17} kg. Equal-sized, wide binaries and ultra-red colors are common in the low-inclination 'cold' classical part of the Kuiper Belt and likely formed through some sort of three-body interactions within a much denser Kuiper Belt. To date 2007 TY430 is the only ultra-red, equal-sized binary known outside of the classical Kuiper Belt population. Numerical simulations suggest 2007 TY430 is moderately unstable in the outer part of the 3:2 resonance and thus 2007 TY430 is likely an escaped 'cold' classical object that later got trapped in the 3:2 resonance. Similar to the known equal-sized, wide binaries in the cold classical population, the binary 2007 TY430 requires a high albedo and very low density structure to obtain the total mass found for the pair. For a realistic minimum density of 0.5 g cm{sup -3} the albedo of 2007 TY430 would be greater than 0.17. For reasonable densities, the radii of either component should be less than 60 km, and thus the relatively low eccentricity of the binary is interesting since no tides should be operating on the bodies at their large distances from each other. The low prograde inclination of the binary also makes it unlikely that the Kozai mechanism could have altered the orbit, making the 2007 TY430 binary orbit likely one of the few relatively unaltered primordial binary orbits known. Under some binary formation models, the low-inclination prograde orbit of the 2007 TY430 binary indicates formation within a relatively high velocity regime in the Kuiper Belt.

  4. QER- Comment of Neal Major Jameson

    Broader source: Energy.gov [DOE]

    It has come to my attention that the Shale Gas Tennessee Pipeline is proposed to pass through several different protected properties in Massachusetts. This is an outrage. Such a pipeline, I feel, is questionable in the best of circumstances, but to run the risk of passing it through several pristine properties is a risk that should not, in good conscience, be considered. I am asking that you please reconsider the proposed course for this pipeline. Sincerely, Neal Major Jameson

  5. Major Demonstrations | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Major Contract Solicitation Sandia National Laboratories (M&O) Contract Competition National Security Campus M&O Contract Competition Pantex Plant Wind Farm Acquisition Y-12 National Security Complex, Pantex Plant, with Option for Savannah River Tritium Operations Management and Operating (M&O) Contract Competition NNSA Pantex/Y-12 National Security Complex and DOE Oak Ridge Office Consolidated Protective Force Services Emergency Operations Training Academy (EOTA) Support Service

  6. Major Contract Solicitation | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Major Contract Solicitation Current and future contract solicitations Design, Integration, Construction, Communications and Engineering (DICCE) 2 Contract Los Alamos National Laboratory Steam Plant Project Nevada National Security Site Management and Operating (M&O) Contract Competition Sandia National Laboratories (M&O) Contract Competition Past contract solicitations: National Security Campus M&O Contract Competition Related Topics apm contracting contracts Related News Sandia

  7. EM Major Contracts Awarded Since 2006 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EM's major contracts PDF icon Awarded Major Contracts Since 2006 More Documents & Publications Major Contracts Summary Service Contract Inventory Acquisition Forecast Download

  8. Major DOE Biofuels Project Locations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Major DOE Biofuels Project Locations More Documents & Publications Major DOE Biofuels Project Locations Major DOE Biofuels Project Locations Algal Biofuel Technologies

  9. Performance profiles of major energy producers, 1997

    SciTech Connect (OSTI)

    1999-01-01

    The energy industry generally and petroleum and natural gas operations in particular are frequently reacting to a variety of unsettling forces. Falling oil prices, economic upswings, currency devaluations, increasingly rigorous environmental quality standards, deregulation of electricity markets, and continued advances in exploration and production technology were among the challenges and opportunities to the industry in 1997. To analyze the extent to which these and other developments have affected energy industry financial and operating performance, strategies, and industry structure, the Energy Information Administration (EIA) maintains the Financial Reporting Systems (FRS). Through Form EIA-28, major US energy companies annually report to the FRS. Financial and operating information is reported by major lines of business, including oil and gas production (upstream), petroleum refining and marketing (downstream), other energy operations, and nonenergy business. Performance Profiles of Major Producers 1997 examines the interplays of energy markets, companies` strategies, and government policies (in 1997 and in historical context) that gave rise to the results given here. The report also analyzes other key aspects of energy company financial performance as seen through the multifaceted lens provided by the FRS data and complementary data for industry overall. 41 figs., 77 tabs.

  10. Impacts of oil disturbances: lessons from experience. [1973-1974 Oil Crisis; 1978-1979 Iranian Revolution; 1980-1981 Iran-Iraq War

    SciTech Connect (OSTI)

    Curlee, T R

    1983-01-01

    An analysis of the impacts of previous oil distrubances can be used to suggest the impacts of future oil disturbances. This paper reviews how the 1973-1974 Oil Crisis, the 1978-1979 Iranian Revolution, and the 1980-1981 Iran-Iraq War impacted the US and world oil markets. Various measures of impacts are considered, such as impacts on physical flows of crude and products, crude and product price changes on the US and world markets, impacts on stocks of crude and products, and impacts on refiners' inputs and outputs. Various macroeconomic indicators, such as gross national product, inflation rates, and unemployment, are also considered. Of particular interest in this study are the impacts that oil disturbances have had (and could have) on the availabilities of particular crude types and the abilities of US refiners to process crudes of various types in the short run. In addition, this paper reviews how the actions of the consuming countries and the major oil companies affected the impacts of past disturbances. The paper briefly discusses the likely causes and impacts of future oil distrubances and summarizes the lessons to be learned from past reactions to oil disturbances.

  11. Reducing cold-start emissions by catalytic converter thermal management

    SciTech Connect (OSTI)

    Burch, S D; Potter, T F; Keyser, M A; Brady, M J; Michaels, K F

    1995-01-01

    Vacuum insulation and phase-change thermal storage have been used to enhance the heat retention of a prototype catalytic converter. Storing heat in the converter between trips allows exhaust gases to be converted more quickly, significantly reducing cold-start emissions. Using a small metal hydride, the thermal conductance of the vacuum insulation can be varied continuously between 0.49 and 27 W/m{sup 2}K (R-12 to R-0.2 insulation) to prevent overheating of the catalyst. A prototype was installed in a Dodge Neon with a 2.0-liter engine. Following a standard preconditioning and a 23-hour cold soak, an FTP (Federal Test Procedure) emissions test was performed. Although exhaust temperatures during the preconditioning were not hot enough to melt the phase-change material, the vacuum insulation performed well, resulting in a converter temperature of 146{degrees}C after the 23-hour cold soak at 27{degrees}C. Compared to the same converter at ambient conditions, overall emissions of CO and HC were reduced by 52 % and 29 %, to 0.27 and 0.037 g/mile, respectively. The maximum converter temperature during the FTP cycle was 720{degrees}C. This limited testing was performed with a nearly-fresh palladium-only catalyst, but demonstrates the potential of this vacuum insulation approach for emissions reduction and thermal control. Further testing is ongoing. An initial assessment of several production issues is made, including high-volume fabrication challenges, durability, and cost.

  12. The Effect of Cold Work on Properties of Alloy 617

    SciTech Connect (OSTI)

    Richard Wright

    2014-08-01

    Alloy 617 is approved for non-nuclear construction in the ASME Boiler and Pressure Vessel Code Section I and Section VIII, but is not currently qualified for nuclear use in ASME Code Section III. A draft Code Case was submitted in 1992 to qualify the alloy for nuclear service but efforts were stopped before the approval process was completed.1 Renewed interest in high temperature nuclear reactors has resulted in a new effort to qualify Alloy 617 for use in nuclear pressure vessels. The mechanical and physical properties of Alloy 617 were extensively characterized for the VHTR programs in the 1980’s and incorporated into the 1992 draft Code Case. Recently, the properties of modern heats of the alloy that incorporate an additional processing step, electro-slag re-melting, have been characterized both to confirm that the properties of contemporary material are consistent with those in the historical record and to increase the available database. A number of potential issues that were identified as requiring further consideration prior to the withdrawal of the 1992 Code Case are also being re-examined in the current R&D program. Code Cases are again being developed to allow use of Alloy 617 for nuclear design within the rules of the ASME Boiler and Pressure Vessel Code. In general the Code defines two temperature ranges for nuclear design with austenitic and nickel based alloys. Below 427°C (800°F) time dependent behavior is not considered, while above this temperature creep and creep-fatigue are considered to be the dominant life-limiting deformation modes. There is a corresponding differentiation in the treatment of the potential for effects associated with cold work. Below 427°C the principal issue is the relationship between the level of cold work and the propensity for stress corrosion cracking and above that temperature the primary concern is the impact of cold work on creep-rupture behavior.

  13. Miniature quadrupole mass spectrometer having a cold cathode ionization source

    DOE Patents [OSTI]

    Felter, Thomas E.

    2002-01-01

    An improved quadrupole mass spectrometer is described. The improvement lies in the substitution of the conventional hot filament electron source with a cold cathode field emitter array which in turn allows operating a small QMS at much high internal pressures then are currently achievable. By eliminating of the hot filament such problems as thermally "cracking" delicate analyte molecules, outgassing a "hot" filament, high power requirements, filament contamination by outgas species, and spurious em fields are avoid all together. In addition, the ability of produce FEAs using well-known and well developed photolithographic techniques, permits building a QMS having multiple redundancies of the ionization source at very low additional cost.

  14. Deuterium concentration and cold fusion; Rate distributions in palladium

    SciTech Connect (OSTI)

    Rogers, V.C.; Sandquist, G.M.; Nielson, K.K. )

    1989-12-01

    Cold fusion reactions and excess heat production have been reported in the electrolysis of heavy water with a palladium metal cathode. Solution of the standard diffusion equation for deuterium without fusion indicates that the deuterium concentration distribution rapidly becomes constant in the palladium lattice. Solution of the nonlinear diffusion equation for deuterium undergoing fusion also gives constant deuterium concentrations, suggesting that any fusion occurs uniformly throughout the palladium lattice. The hypothesis that fusion reactions occur predominantly at the palladium surface is shown to be inconsistent with experimental data.

  15. Thermal, thermoelectric, and cathode poisoning effects in cold fusion experiments

    SciTech Connect (OSTI)

    Keesing, R.G.; Greenhow, R.C.; Cohler, M.D. ); McQuillan, A.J. )

    1991-03-01

    This paper reports on an unsuccessful attempt to repeat the observations by Fleischmann and Pons of cold nuclear fusion in deuterium-charged palladium; no excess heat is found, nor is any gamma or neutron activity identified. Peltier heating at the palladium/platinum junction is investigated, but no effects are seen; the possibility remains, however, that a large Peltier coefficient may arise for deuterium concentrations that render the palladium-deuterium semiconducting. Finally, the effects of poisoning the palladium with cyanide were investigated.

  16. Evaluation of the intermittent GTA cold wire feed weld system

    SciTech Connect (OSTI)

    Dereskiewicz, J.P.

    1991-08-01

    An intermittent gas tungsten arc cold wire feed process was statistically evaluated to determine the feasibility of applying this process to meet the 0.030-inch weld penetration and peak temperature requirements when unfavorable joint tolerances exist on a subassembly weld. The wire feed system was determined to only slightly benefit the welding process over normal pulsed gas tungsten arc welding using traditional wire feeding capabilities. However, the complexity of this process and extensive welding operator training and qualification does not outweigh the benefits of incorporating this synchronized pulse wire feed system in production. 2 refs., 43 figs., 11 tabs.

  17. Condensate fraction of cold gases in a nonuniform external potential

    SciTech Connect (OSTI)

    Astrakharchik, G. E.; Krutitsky, K. V.

    2011-09-15

    Exact calculation of the condensate fraction in multidimensional inhomogeneous interacting Bose systems in a confining potential of arbitrary shape is a difficult computational problem. We have developed an iterative procedure which allows us to calculate the condensate fraction as well as the corresponding eigenfunction of the one-body density matrix. We successfully validate this procedure in diffusion Monte Carlo simulations of a Bose gas in an optical lattice at zero temperature. We also discuss the relation between different criteria used for testing coherence in cold Bose systems, such as the fraction of particles that are superfluid, condensed, or in the zero-momentum state.

  18. The Cold Dark Matter Search test stand warm electronics card

    SciTech Connect (OSTI)

    Hines, Bruce; Hansen, Sten; Huber, Martin; Kiper, Terry; Rau, Wolfgang; Saab, Tarek; Seitz, Dennis; Sundqvist, Kyle; Mandic, Vuk; /Minnesota U.

    2010-11-01

    A card which does the signal processing for four SQUID amplifiers and two charge sensitive channels is described. The card performs the same functions as is presently done with two custom 9U x 280mm Eurocard modules, a commercial multi-channel VME digitizer, a PCI to GPIB interface, a PCI to VME interface and a custom built linear power supply. By integrating these functions onto a single card and using the power over Ethernet standard, the infrastructure requirements for instrumenting a Cold Dark Matter Search (CDMS) detector test stand are significantly reduced.

  19. Nonlinear lower hybrid oscillations in a cold viscous plasma

    SciTech Connect (OSTI)

    Maity, Chandan; Chakrabarti, Nikhil

    2011-12-15

    An analytical description of nonlinear lower hybrid oscillations in a cold quasi-neutral plasma in the presence of viscosity is presented in one spatial dimension by using Lagrangian variables. By treating viscosity coefficients of the electron and ion fluids as inversely proportional to their respective densities, an exact solution is obtained. It is found that the damping rate of such oscillations is directly proportional to the effective viscosity coefficients of electron and ion fluids. A possible implication of such solutions is briefly outlined.

  20. ELECTRICAL CIRCUITS USING COLD-CATHODE TRIODE VALVES

    DOE Patents [OSTI]

    Goulding, F.S.

    1957-11-26

    An electrical circuit which may be utilized as a pulse generator or voltage stabilizer is presented. The circuit employs a cold-cathode triode valve arranged to oscillate between its on and off stages by the use of selected resistance-capacitance time constant components in the plate and trigger grid circuits. The magnitude of the d-c voltage applied to the trigger grid circuit effectively controls the repetition rate of the output pulses. In the voltage stabilizer arrangement the d-c control voltage is a portion of the supply voltage and the rectified output voltage is substantially constant.

  1. Major marine source rocks and stratigraphic cycles

    SciTech Connect (OSTI)

    Duval, B.C.

    1995-11-01

    The identification of continental encroachment cycles and subcycles by using sequence stratigraphy can assist explorationists in locating source rocks. The continental encroachment cycles are associated with the breakup of the supercontinents and fit a smooth long-term eustatic curve. They are first order, with a duration greater than 50 m.y., and are composed of transgressive and regressive phases inducing major changes in shoreline. The limit between the transgressive and regressive phases corresponds to a major downlap surface, and major marine source rocks are often found in association with this surface, particularly in the northern hemisphere. Potential {open_quotes}secondary{close_quotes} source rock intervals can also be sought by sequence stratigraphy because each continental encroachment cycle is composed of several subcycles, and the same configuration of a regressive forestepping phase overlying a transgressive backstepping phase also creates a downlap surface that may correspond with organic-rich intervals. The stratigraphic distribution of source rocks and related reserves fits reasonably well with continental encroachment cycles and subcycles. For instance, source rocks of Silurian, Upper Jurassic, and Middle-Upper Cretaceous are associated with eustatic highs and bear witness to this relationship. The recognition and mapping of such downlap surfaces is therefore a useful step to help map source rocks. The interpretation of sequence stratigraphy from regional seismic lines, properly calibrated with geochernical data whenever possible, can be of considerable help in the process. Several examples from around the world illustrate the power of the method: off-shore of eastern Venezuela, coastal basin of Angola, western Africa, the North Sea, south Algeria, and the North Caucasian trough.

  2. Atlas of major Appalachian basin gas plays

    SciTech Connect (OSTI)

    Aminian, K.; Avary, K.L.; Baranoski, M.T.; Flaherty, K.; Humphreys, M.; Smosna, R.A.

    1995-06-01

    This regional study of gas reservoirs in the Appalachian basin has four main objectives: to organize all of the -as reservoirs in the Appalachian basin into unique plays based on common age, lithology, trap type and other geologic similarities; to write, illustrate and publish an atlas of major gas plays; to prepare and submit a digital data base of geologic, engineering and reservoir parameters for each gas field; and technology transfer to the oil and gas industry during the preparation of the atlas and data base.

  3. Office of Environmental Management MAJOR CONTRACTS SUMMARY

    Office of Environmental Management (EM)

    Environmental Management MAJOR CONTRACTS SUMMARY As of 5/16/2016 Site Contractor Contract # Current Contract Period Total Value Contract Description Contract Type Carlsbad Field Office Nuclear Waste Partnership, LLC DE-EM0001971 Base Period 10/01/12 - 9/30/17 $1.42B Waste Isolation Pilot Project Management and Operating Contract Cost plus award fee 1-Yr Option 10/01/17 - 9/30/18 4-Yr Option 10/01/18-9/30/22 Portage, Inc. DE-EM0004007 Base Period 1/02/16 - 1/01/19 $42.4M Carlsbad Technical

  4. Major Communications Report May 28, 2009 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    May 28, 2009 Major Communications Report May 28, 2009 This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of May 28, 2009. Office spreadsheet icon DOE_Major_Communications_05282009.xls More Documents & Publications Major Communications Report May 5, 2009 Major Communications Report April 17

  5. Selecting major Appalachian basin gas plays

    SciTech Connect (OSTI)

    Patchen, D.G.; Nuttall, B.C.; Baranoski, M.T.; Harper, J.A.; Schwietering, J.F.; Van Tyne, A.; Aminian, K.; Smosna, R.A.

    1992-01-01

    Under a cooperative agreement with the Morgantown Energy Technology Center (METC) the Appalachian Oil and Natural Gas Research Consortium (AONGRC) is preparing a geologic atlas of the major gas plays in the Appalachian basin, and compiling a database for all fields in each geologic play. the first obligation under this agreement was to prepare a topical report that identifies the major gas plays, briefly describes each play, and explains how the plays were selected. Four main objectives have been defined for this initial task: assign each gas reservoir to a geologic play, based on age, trap type, degree of structural control, and depositional environment; organize all plays into geologically-similar groups based on the main criteria that defines each play; prepare a topical report for METC; and transfer this technology to industry through posters and talks at regional geological and engineering meetings including the Appalachian Petroleum Geology Symposium, Northeastern Section meeting of the Geological Society of America, the METC Gas Contractors Review meeting, the Kentucky Oil and Gas Association, and the Appalachian Energy Group.

  6. Selecting major Appalachian basin gas plays

    SciTech Connect (OSTI)

    Patchen, D.G.; Nuttall, B.C.; Baranoski, M.T.; Harper, J.A.; Schwietering, J.F.; Van Tyne, A.; Aminian, K.; Smosna, R.A.

    1992-06-01

    Under a cooperative agreement with the Morgantown Energy Technology Center (METC) the Appalachian Oil and Natural Gas Research Consortium (AONGRC) is preparing a geologic atlas of the major gas plays in the Appalachian basin, and compiling a database for all fields in each geologic play. the first obligation under this agreement was to prepare a topical report that identifies the major gas plays, briefly describes each play, and explains how the plays were selected. Four main objectives have been defined for this initial task: assign each gas reservoir to a geologic play, based on age, trap type, degree of structural control, and depositional environment; organize all plays into geologically-similar groups based on the main criteria that defines each play; prepare a topical report for METC; and transfer this technology to industry through posters and talks at regional geological and engineering meetings including the Appalachian Petroleum Geology Symposium, Northeastern Section meeting of the Geological Society of America, the METC Gas Contractors Review meeting, the Kentucky Oil and Gas Association, and the Appalachian Energy Group.

  7. Materials Selection for the HFIR Cold Neutron Source

    SciTech Connect (OSTI)

    Farrell, K.

    2001-08-24

    In year 2002 the High Flux Isotope Reactor (HFIR) will be fitted with a source of cold neutrons to upgrade and expand its existing neutron scattering facilities. The in-reactor components of the new source consist of a moderator vessel containing supercritical hydrogen gas moderator at a temperature of 20K and pressure of 15 bar, and a surrounding vacuum vessel. They will be installed in an enlarged beam tube located at the site of the present horizontal beam tube, HB-4; which terminates within the reactor's beryllium reflector. These components must withstand exceptional service conditions. This report describes the reasons and factors underlying the choice of 6061-T6 aluminum alloy for construction of the in-reactor components. The overwhelming considerations are the need to minimize generation of nuclear heat and to remove that heat through the flowing moderator, and to achieve a minimum service life of about 8 years coincident with the replacement schedule for the beryllium reflector. 6061-T6 aluminum alloy offers the best combination of low nuclear heating, high thermal conductivity, good fabricability, compatibility with hydrogen, superior cryogenic properties, and a well-established history of satisfactory performance in nuclear environments. These features are documented herein. An assessment is given of the expected performance of each component of the cold source.

  8. A survey of current international ``cold fusion`` research

    SciTech Connect (OSTI)

    Fox, H.; Bailey, P.

    1995-12-31

    A new energy producing technology has been found in several so-called ``cold fusion`` experiments. In years past, these effects have been difficult to reproduce, but are now being replicated internationally. Energy production has been achieved in reactors using heavy water (D{sub 2}O) and palladium cathodes. Excess energy has also been produced using light water (H{sub 2}O) and nickel cathodes. Significant results have been reported by SRI, International at the 1994 IECEC. In several types of experimental reactors, more thermal energy is produced than input by electrical energy. This ``excess heat`` has now been replicated in 30 countries and significant amounts of nuclear by-products have also been measured. Whether all of the observed excess thermal heat is the result of nuclear reactions is still being investigated. A key to the process is the purity and quality of the cathode metals used. In addition, some of the reactors are strongly sensitive to hydrogen or deuterium loading. Many papers have now been published reporting on excess thermal heat and on some nuclear by-products. This paper summarizes the results of six years of collecting and reviewing over 2,000 technical papers on cold fusion. Successful experimental papers are tabulated by country and year. Continuing experimental efforts are cited and the various types of experimental evidence are reviewed.

  9. A REALISTIC EXAMINATION OF COLD FUSION CLAIMS 24 YEARS LATER

    SciTech Connect (OSTI)

    Shanahan, K.

    2012-10-22

    On March 29, 1989, chemists Martin Fleischmann and Stanley Pons announced they had discovered an effect whose explanation was required to lie in the realm of nuclear reactions. Their claim, and those subsequent to it of roughly similar nature, became known as ‘cold fusion’. Research continues to this day on this effect, but what has become clear is that whatever it is, it is not a conventional fusion process. Thus the ‘cold fusion’ moniker is somewhat inappropriate and many current researchers in the field prefer the term “Low Energy Nuclear Reactions (LENR)”, although other terms have been coined for it as well. the results developed out of the LENR research do in fact show something is happening to produce signals which might be interpreted as supporting nuclear reactions (which is what encourages and sustains LENR researchers), but which can also be interpreted via a set of unique and interesting conventional processes. The focus of this document is to describe and address recent objections to such processes so that subsequent LENR research can be guided to develop information that will determine whether either set of explanations has merit. It is hoped that criteria delineated herein will aid the USDOE and other agencies in determining if LENR proposals are meritorious and worthy of support or not.

  10. Human factors engineering report for the cold vacuum drying facility

    SciTech Connect (OSTI)

    IMKER, F.W.

    1999-06-30

    The purpose of this report is to present the results and findings of the final Human Factors Engineering (HFE) technical analysis and evaluation of the Cold Vacuum Drying Facility (CVDF). Ergonomics issues are also addressed in this report, as appropriate. This report follows up and completes the preliminary work accomplished and reported by the Preliminary HFE Analysis report (SNF-2825, Spent Nuclear Fuel Project Cold Vacuum Drying Facility Human Factors Engineering Analysis: Results and Findings). This analysis avoids redundancy of effort except for ensuring that previously recommended HFE design changes have not affected other parts of the system. Changes in one part of the system may affect other parts of the system where those changes were not applied. The final HFE analysis and evaluation of the CVDF human-machine interactions (HMI) was expanded to include: the physical work environment, human-computer interface (HCI) including workstation and software, operator tasks, tools, maintainability, communications, staffing, training, and the overall ability of humans to accomplish their responsibilities, as appropriate. Key focal areas for this report are the process bay operations, process water conditioning (PWC) skid, tank room, and Central Control Room operations. These key areas contain the system safety-class components and are the foundation for the human factors design basis of the CVDF.

  11. MAJOR OIL PLAYS IN UTAH AND VICINITY

    SciTech Connect (OSTI)

    Thomas C. Chidsey Jr; Craig D. Morgan; Roger L. Bon

    2003-07-01

    Utah oil fields have produced over 1.2 billion barrels (191 million m{sup 3}). However, the 13.7 million barrels (2.2 million m{sup 3}) of production in 2002 was the lowest level in over 40 years and continued the steady decline that began in the mid-1980s. The Utah Geological Survey believes this trend can be reversed by providing play portfolios for the major oil producing provinces (Paradox Basin, Uinta Basin, and thrust belt) in Utah and adjacent areas in Colorado and Wyoming. Oil plays are geographic areas with petroleum potential caused by favorable combinations of source rock, migration paths, reservoir rock characteristics, and other factors. The play portfolios will include: descriptions and maps of the major oil plays by reservoir; production and reservoir data; case-study field evaluations; summaries of the state-of-the-art drilling, completion, and secondary/tertiary techniques for each play; locations of major oil pipelines; descriptions of reservoir outcrop analogs; and identification and discussion of land use constraints. All play maps, reports, databases, and so forth, produced for the project will be published in interactive, menu-driven digital (web-based and compact disc) and hard-copy formats. This report covers research activities for the third quarter of the first project year (January 1 through March 31, 2003). This work included gathering field data and analyzing best practices in the eastern Uinta Basin, Utah, and the Colorado portion of the Paradox Basin. Best practices used in oil fields of the eastern Uinta Basin consist of conversion of all geophysical well logs into digital form, running small fracture treatments, fingerprinting oil samples from each producing zone, running spinner surveys biannually, mapping each producing zone, and drilling on 80-acre (32 ha) spacing. These practices ensure that induced fractures do not extend vertically out of the intended zone, determine the percentage each zone contributes to the overall production of the well, identify areas that may be by-passed by a waterflood, and prevent rapid water breakthrough. In the eastern Paradox Basin, Colorado, optimal drilling, development, and production practices consist of increasing the mud weight during drilling operations before penetrating the overpressured Desert Creek zone; centralizing treatment facilities; and mixing produced water from pumping oil wells with non-reservoir water and injecting the mixture into the reservoir downdip to reduce salt precipitation, dispose of produced water, and maintain reservoir pressure to create a low-cost waterflood. During this quarter, technology transfer activities consisted of technical presentations to members of the Technical Advisory Board in Colorado and the Colorado Geological Survey. The project home page was updated on the Utah Geological Survey Internet web site.

  12. Cold adaptation of the mononuclear molybdoenzyme periplasmic nitrate reductase from the Antarctic bacterium Shewanella gelidimarina

    SciTech Connect (OSTI)

    Simpson, Philippa J.L.; Codd, Rachel; School of Medical Sciences and Bosch Institute, University of New South Wales, New South Wales 2006

    2011-11-04

    Highlights: Black-Right-Pointing-Pointer Cold-adapted phenotype of NapA from the Antarctic bacterium Shewanella gelidimarina. Black-Right-Pointing-Pointer Protein homology model of NapA from S. gelidimarina and mesophilic homologue. Black-Right-Pointing-Pointer Six amino acid residues identified as lead candidates governing NapA cold adaptation. Black-Right-Pointing-Pointer Molecular-level understanding of designing cool-temperature in situ oxyanion sensors. -- Abstract: The reduction of nitrate to nitrite is catalysed in bacteria by periplasmic nitrate reductase (Nap) which describes a system of variable protein subunits encoded by the nap operon. Nitrate reduction occurs in the NapA subunit, which contains a bis-molybdopterin guanine dinucleotide (Mo-MGD) cofactor and one [4Fe-4S] iron-sulfur cluster. The activity of periplasmic nitrate reductase (Nap) isolated as native protein from the cold-adapted (psychrophilic) Antarctic bacterium Shewanella gelidimarina (Nap{sub Sgel}) and middle-temperature adapted (mesophilic) Shewanella putrefaciens (Nap{sub Sput}) was examined at varied temperature. Irreversible deactivation of Nap{sub Sgel} and Nap{sub Sput} occurred at 54.5 and 65 Degree-Sign C, respectively. When Nap{sub Sgel} was preincubated at 21-70 Degree-Sign C for 30 min, the room-temperature nitrate reductase activity was maximal and invariant between 21 and 54 Degree-Sign C, which suggested that Nap{sub Sgel} was poised for optimal catalysis at modest temperatures and, unlike Nap{sub Sput}, did not benefit from thermally-induced refolding. At 20 Degree-Sign C, Nap{sub Sgel} reduced selenate at 16% of the rate of nitrate reduction. Nap{sub Sput} did not reduce selenate. Sequence alignment showed 46 amino acid residue substitutions in Nap{sub Sgel} that were conserved in NapA from mesophilic Shewanella, Rhodobacter and Escherichia species and could be associated with the Nap{sub Sgel} cold-adapted phenotype. Protein homology modeling of Nap{sub Sgel} using a mesophilic template with 66% amino acid identity showed the majority of substitutions occurred at the protein surface distal to the Mo-MGD cofactor. Two mesophilic {r_reversible} psychrophilic substitutions (Asn {r_reversible} His, Val {r_reversible} Trp) occurred in a region close to the surface of the NapA substrate funnel resulting in potential interdomain {pi}-{pi} and/or cation-{pi} interactions. Three mesophilic {r_reversible} psychrophilic substitutions occurred within 4.5 A of the Mo-MGD cofactor (Phe {r_reversible} Met, Ala {r_reversible} Ser, Ser {r_reversible} Thr) resulting in local regions that varied in hydrophobicity and hydrogen bonding networks. These results contribute to the understanding of thermal protein adaptation in a redox-active mononuclear molybdenum enzyme and have implications in optimizing the design of low-temperature environmental biosensors.

  13. Building America Whole-House Solutions for New Home: Fort Devens: Cold

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Climate Market-Rate Townhomes | Department of Energy Building America Whole-House Solutions for New Home: Fort Devens: Cold Climate Market-Rate Townhomes Building America Whole-House Solutions for New Home: Fort Devens: Cold Climate Market-Rate Townhomes Twelve townhomes constructed at a decommissioned army base incorporated efficiency upgrades to achieve a HERS Index score of 41 before adding renewables. PDF icon Fort Devens: Cold Climate Market-Rate Townhomes Targeting HERS Index of 40 -

  14. Building America Whole-House Solutions for New Homes: Affordable Cold

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Climate Infill Housing with Hybrid Insulation Approach | Department of Energy Affordable Cold Climate Infill Housing with Hybrid Insulation Approach Building America Whole-House Solutions for New Homes: Affordable Cold Climate Infill Housing with Hybrid Insulation Approach The City of Wyandotte started a construction program to engage local builders in constructing energy-efficient homes in existing neighborhoods for less than $100/ft2. PDF icon Affordable Cold Climate Infill Housing with

  15. The temperature dependence of ultra-cold neutron wall losses in material

    Office of Scientific and Technical Information (OSTI)

    bottles coated with deuterated polystryene (Conference) | SciTech Connect The temperature dependence of ultra-cold neutron wall losses in material bottles coated with deuterated polystryene Citation Details In-Document Search Title: The temperature dependence of ultra-cold neutron wall losses in material bottles coated with deuterated polystryene Ultra-cold neutrons (UCN) from the LANSCE super-thermal deuterium source were used to fill an acrylic bottle coated with deuterated polystyrene.

  16. MAJOR OIL PLAYS IN UTAH AND VICINITY

    SciTech Connect (OSTI)

    Thomas C. Chidsey; Craig D. Morgan; Kevin McClure; Grant C. Willis

    2003-09-01

    Utah oil fields have produced over 1.2 billion barrels (191 million m{sup 3}). However, the 13.7 million barrels (2.2 million m{sup 3}) of production in 2002 was the lowest level in over 40 years and continued the steady decline that began in the mid-1980s. The Utah Geological Survey believes this trend can be reversed by providing play portfolios for the major oil-producing provinces (Paradox Basin, Uinta Basin, and thrust belt) in Utah and adjacent areas in Colorado and Wyoming. Oil plays are geographic areas with petroleum potential caused by favorable combinations of source rock, migration paths, reservoir rock characteristics, and other factors. The play portfolios will include: descriptions and maps of the major oil plays by reservoir; production and reservoir data; case-study field evaluations; summaries of the state-of-the-art drilling, completion, and secondary/tertiary techniques for each play; locations of major oil pipelines; descriptions of reservoir outcrop analogs; and identification and discussion of land use constraints. All play maps, reports, databases, and so forth, produced for the project will be published in interactive, menu-driven digital (web-based and compact disc) and hard-copy formats. This report covers research activities for the fourth quarter of the first project year (April 1 through June 30, 2003). This work included describing outcrop analogs to the Jurassic Nugget Sandstone and Pennsylvanian Paradox Formation, the major oil producers in the thrust belt and Paradox Basin, respectively. Production-scale outcrop analogs provide an excellent view, often in three dimensions, of reservoir-facies characteristics and boundaries contributing to the overall heterogeneity of reservoir rocks. They can be used as a ''template'' for evaluation of data from conventional core, geophysical and petrophysical logs, and seismic surveys. The Nugget Sandstone was deposited in an extensive dune field that extended from Wyoming to Arizona. Outcrop analogs are found in the stratigraphically equivalent Navajo Sandstone of southern Utah which displays large-scale dunal cross-strata with excellent reservoir properties and interdunal features such as oases, wadi, and playa lithofacies with poor reservoir properties. Hydrocarbons in the Paradox Formation are stratigraphically trapped in carbonate buildups (or phylloid-algal mounds). Similar carbonate buildups are exposed in the Paradox along the San Juan River of southeastern Utah. Reservoir-quality porosity may develop in the types of facies associated with buildups such as troughs, detrital wedges, and fans, identified from these outcrops. When combined with subsurface geological and production data, these outcrop analogs can improve (1) development drilling and production strategies such as horizontal drilling, (2) reservoir-simulation models, (3) reserve calculations, and (4) design and implementation of secondary/tertiary oil recovery programs and other best practices used in the oil fields of Utah and vicinity. During this quarter, technology transfer activities consisted of exhibiting the project plans, objectives, and products at a booth at the 2003 annual convention of the American Association of Petroleum Geologists. The project home page was updated on the Utah Geological Survey Internet web site.

  17. Major Oil Plays in Utah and Vicinity

    SciTech Connect (OSTI)

    Thomas C. Chidsey; Craig D. Morgan; Kevin McClure; Douglas A. Sprinkel; Roger L. Bon; Hellmut H. Doelling

    2003-12-31

    Utah oil fields have produced over 1.2 billion barrels (191 million m{sup 3}). However, the 13.7 million barrels (2.2 million m{sup 3}) of production in 2002 was the lowest level in over 40 years and continued the steady decline that began in the mid-1980s. The Utah Geological Survey believes this trend can be reversed by providing play portfolios for the major oil-producing provinces (Paradox Basin, Uinta Basin, and thrust belt) in Utah and adjacent areas in Colorado and Wyoming. Oil plays are geographic areas with petroleum potential caused by favorable combinations of source rock, migration paths, reservoir rock characteristics, and other factors. The play portfolios will include: descriptions and maps of the major oil plays by reservoir; production and reservoir data; case-study field evaluations; locations of major oil pipelines; identification and discussion of land-use constraints; descriptions of reservoir outcrop analogs; and summaries of the state-of-the-art drilling, completion, and secondary/tertiary techniques for each play. This report covers research activities for the sixth quarter of the project (October 1 through December 31, 2003). This work included describing outcrop analogs for the Jurassic Twin Creek Limestone and Mississippian Leadville Limestone, major oil producers in the thrust belt and Paradox Basin, respectively, and analyzing best practices used in the southern Green River Formation play of the Uinta Basin. Production-scale outcrop analogs provide an excellent view of reservoir petrophysics, facies characteristics, and boundaries contributing to the overall heterogeneity of reservoir rocks. They can be used as a ''template'' for evaluation of data from conventional core, geophysical and petrophysical logs, and seismic surveys. In the Utah/Wyoming thrust belt province, the Jurassic Twin Creek Limestone produces from subsidiary closures along major ramp anticlines where the low-porosity limestone beds are extensively fractured and sealed by overlying argillaceous and non-fractured units. The best outcrop analogs for Twin Creek reservoirs are found at Devils Slide and near the town of Peoa, Utah, where fractures in dense, homogeneous non-porous limestone beds are in contact with the basal siltstone units (containing sealed fractures) of the overlying units. The shallow marine, Mississippian Leadville Limestone is a major oil and gas reservoir in the Paradox Basin of Utah and Colorado. Hydrocarbons are produced from basement-involved, northwest-trending structural traps with closure on both anticlines and faults. Excellent outcrops of Leadville-equivalent rocks are found along the south flank of the Uinta Mountains, Utah. For example, like the Leadville, the Mississippian Madison Limestone contains zones of solution breccia, fractures, and facies variations. When combined with subsurface geological and production data, these outcrop analogs can improve (1) development drilling and production strategies such as horizontal drilling, (2) reservoir-simulation models, (3) reserve calculations, and (4) design and implementation of secondary/tertiary oil recovery programs and other best practices used in the oil fields of Utah and vicinity. In the southern Green River Formation play of the Uinta Basin, optimal drilling, development, and production practices consist of: (1) owning drilling rigs and frac holding tanks; (2) perforating sandstone beds with more than 8 percent neutron porosity and stimulate with separate fracture treatments; (3) placing completed wells on primary production using artificial lift; (4) converting wells relatively soon to secondary waterflooding maintaining reservoir pressure above the bubble point to maximize oil recovery; (5) developing waterflood units using an alternating injector--producer pattern on 40-acre (16-ha) spacing; and (6) recompleting producing wells by perforating all beds that are productive in the waterflood unit. As part of technology transfer activities during this quarter, an abstract describing outcrop reservoir analogs was accepted by the American Association of Petroleum Geologists, for presentation at the 2004 annual meeting in Dallas, Texas. Another abstract was submitted for consideration on basin-wide correlation of Green River Formation plays and subplays in the Uinta Basin in Utah. The project home page was updated on the Utah Geological Survey Internet web site.

  18. Interim report of the Cold Fusion Panel of the Energy Research Advisory Board

    SciTech Connect (OSTI)

    Not Available

    1989-08-01

    This report reviews the current status of cold fusion and makes some preliminary conclusions and recommendations, as requested by the Secretary of Energy.

  19. V-197: Adobe ColdFusion 10 WebSockets Security Bypass Vulnerability

    Office of Energy Efficiency and Renewable Energy (EERE)

    The vulnerability is caused due to an unspecified error and can be exploited to invoke public methods on ColdFusion Components (CFC) using WebSockets

  20. Major Communications Report April 28, 2009 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    28, 2009 Major Communications Report April 28, 2009 This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of April 28, 2009. Office spreadsheet icon DOE_Major_Communications_04282009.xls More Documents & Publications Major Communications Report April 17, 2009 Major Communications Report May 5, 2009 Major Communications Report April 30

  1. Major Communications Report April 30, 2009 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    30, 2009 Major Communications Report April 30, 2009 This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of April 30, 2009. Office spreadsheet icon DOE_Major_Communications_04302009.xls More Documents & Publications Major Communications Report April 17, 2009 Major Communications Report May 5, 2009 Major Communications Report April 28

  2. Major Communications Report May 5, 2009 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5, 2009 Major Communications Report May 5, 2009 This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of May 5, 2009. Office spreadsheet icon DOE_Major_Communications_05052009.xls More Documents & Publications Major Communications Report April 17, 2009 Major Communications Report April 30, 2009 Major Communications Report April 28

  3. Major Communications Report May 7, 2009 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7, 2009 Major Communications Report May 7, 2009 This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of May 7, 2009. Office spreadsheet icon DOE_Major_Communications_05072009.xls More Documents & Publications Major Communications Report April 17, 2009 Major Communications Report May 5, 2009 Major Communications Report April 30

  4. An analysis of uranium dispersal and health effects using a Gulf War case study.

    SciTech Connect (OSTI)

    Marshall, Albert Christian

    2005-07-01

    The study described in this report used mathematical modeling to estimate health risks from exposure to depleted uranium (DU) during the 1991 Gulf War for both U.S. troops and nearby Iraqi civilians. The analysis found that the risks of DU-induced leukemia or birth defects are far too small to result in an observable increase in these health effects among exposed veterans or Iraqi civilians. Only a few veterans in vehicles accidentally struck by U.S. DU munitions are predicted to have inhaled sufficient quantities of DU particulate to incur any significant health risk (i.e., the possibility of temporary kidney damage from the chemical toxicity of uranium and about a 1% chance of fatal lung cancer). The health risk to all downwind civilians is predicted to be extremely small. Recommendations for monitoring are made for certain exposed groups. Although the study found fairly large calculational uncertainties, the models developed and used are generally valid. The analysis was also used to assess potential uranium health hazards for workers in the weapons complex. No illnesses are projected for uranium workers following standard guidelines; nonetheless, some research suggests that more conservative guidelines should be considered.

  5. Major Oil Plays In Utah And Vicinity

    SciTech Connect (OSTI)

    Thomas Chidsey

    2007-12-31

    Utah oil fields have produced over 1.33 billion barrels (211 million m{sup 3}) of oil and hold 256 million barrels (40.7 million m{sup 3}) of proved reserves. The 13.7 million barrels (2.2 million m3) of production in 2002 was the lowest level in over 40 years and continued the steady decline that began in the mid-1980s. However, in late 2005 oil production increased, due, in part, to the discovery of Covenant field in the central Utah Navajo Sandstone thrust belt ('Hingeline') play, and to increased development drilling in the central Uinta Basin, reversing the decline that began in the mid-1980s. The Utah Geological Survey believes providing play portfolios for the major oil-producing provinces (Paradox Basin, Uinta Basin, and thrust belt) in Utah and adjacent areas in Colorado and Wyoming can continue this new upward production trend. Oil plays are geographic areas with petroleum potential caused by favorable combinations of source rock, migration paths, reservoir rock characteristics, and other factors. The play portfolios include descriptions and maps of the major oil plays by reservoir; production and reservoir data; case-study field evaluations; locations of major oil pipelines; identification and discussion of land-use constraints; descriptions of reservoir outcrop analogs; and summaries of the state-of-the-art drilling, completion, and secondary/tertiary recovery techniques for each play. The most prolific oil reservoir in the Utah/Wyoming thrust belt province is the eolian, Jurassic Nugget Sandstone, having produced over 288 million barrels (46 million m{sup 3}) of oil and 5.1 trillion cubic feet (145 billion m{sup 3}) of gas. Traps form on discrete subsidiary closures along major ramp anticlines where the depositionally heterogeneous Nugget is also extensively fractured. Hydrocarbons in Nugget reservoirs were generated from subthrust Cretaceous source rocks. The seals for the producing horizons are overlying argillaceous and gypsiferous beds in the Jurassic Twin Creek Limestone, or a low-permeability zone at the top of the Nugget. The Nugget Sandstone thrust belt play is divided into three subplays: (1) Absaroka thrust - Mesozoic-cored shallow structures, (2) Absaroka thrust - Mesozoic-cored deep structures, and (3) Absaroka thrust - Paleozoic-cored shallow structures. Both of the Mesozoic-cored structures subplays represent a linear, hanging wall, ramp anticline parallel to the leading edge of the Absaroka thrust. Fields in the shallow Mesozoic subplay produce crude oil and associated gas; fields in the deep subplay produce retrograde condensate. The Paleozoic-cored structures subplay is located immediately west of the Mesozoic-cored structures subplays. It represents a very continuous and linear, hanging wall, ramp anticline where the Nugget is truncated against a thrust splay. Fields in this subplay produce nonassociated gas and condensate. Traps in these subplays consist of long, narrow, doubly plunging anticlines. Prospective drilling targets are delineated using high-quality, two-dimensional and three-dimensional seismic data, forward modeling/visualization tools, and other state-of-the-art techniques. Future Nugget Sandstone exploration could focus on more structurally complex and subtle, thrust-related traps. Nugget structures may be present beneath the leading edge of the Hogsback thrust and North Flank fault of the Uinta uplift. The Jurassic Twin Creek Limestone play in the Utah/Wyoming thrust belt province has produced over 15 million barrels (2.4 million m{sup 3}) of oil and 93 billion cubic feet (2.6 billion m{sup 3}) of gas. Traps form on discrete subsidiary closures along major ramp anticlines where the low-porosity Twin Creek is extensively fractured. Hydrocarbons in Twin Creek reservoirs were generated from subthrust Cretaceous source rocks. The seals for the producing horizons are overlying argillaceous and clastic beds, and non-fractured units within the Twin Creek. The Twin Creek Limestone thrust belt play is divided into two subplays: (1) Absaroka thrust-Mesozoic-cored structures and (2) Absaroka thrust - Paleozoic-cored structures. The Mesozoic-cored structures subplay represents a linear, hanging wall, ramp anticline parallel to the leading edge of the Absaroka thrust. Fields in this subplay produce crude oil and associated gas. The Paleozoic-cored structures subplay is located immediately west of the Mesozoic-cored structures subplay. It represents a very continuous and linear, hanging wall, ramp anticline where the Twin Creek is truncated against a thrust splay. Fields in this subplay produce nonassociated gas and condensate. Traps in both subplays consist of long, narrow, doubly plunging anticlines.

  6. ALTERNATE REDUCTANT COLD CAP EVALUATION FURNACE PHASE II TESTING

    SciTech Connect (OSTI)

    Johnson, F.; Stone, M.; Miller, D.

    2014-09-03

    Savannah River Remediation (SRR) conducted a Systems Engineering Evaluation (SEE) to determine the optimum alternate reductant flowsheet for the Defense Waste Processing Facility (DWPF). Specifically, two proposed flowsheets (nitric–formic–glycolic and nitric–formic–sugar) were evaluated based upon results from preliminary testing. Comparison of the two flowsheets among evaluation criteria indicated a preference towards the nitric–formic–glycolic flowsheet. Further research and development of this flowsheet eliminated the formic acid, and as a result, the nitric–glycolic flowsheet was recommended for further testing. Based on the development of a roadmap for the nitric–glycolic acid flowsheet, Waste Solidification Engineering (WS-E) issued a Technical Task Request (TTR) to address flammability issues that may impact the implementation of this flowsheet. Melter testing was requested in order to define the DWPF flammability envelope for the nitric-glycolic acid flowsheet. The Savannah River National Laboratory (SRNL) Cold Cap Evaluation Furnace (CEF), a 1/12th scale DWPF melter, was selected by the SRR Alternate Reductant project team as the melter platform for this testing. The overall scope was divided into the following sub-tasks as discussed in the Task Technical and Quality Assurance Plan (TTQAP):  Phase I - A nitric–formic acid flowsheet melter test (unbubbled) to baseline the CEF cold cap and vapor space data to the benchmark melter flammability models;  Phase II - A nitric–glycolic acid flowsheet melter test (unbubbled and bubbled) to: o Define new cold cap reactions and global kinetic parameters in support of the melter flammability model development; o Quantify off-gas surging potential of the feed; o Characterize off-gas condensate for complete organic and inorganic carbon species. After charging the CEF with cullet from Phase I CEF testing, the melter was slurry-fed with glycolic flowsheet based SB6-Frit 418 melter feed at 36% waste loading and was operated continuously for 25 days. Process data was collected throughout testing and included melter operation parameters and off-gas chemistry. In order to generate off-gas data in support of the flammability model development for the nitric-glycolic flowsheet, vapor space steady state testing in the range of ~300-750°C was conducted under the following conditions, (i) 100% (nominal and excess antifoam levels) and 125% stoichiometry feed and (ii) with and without argon bubbling. Adjustments to feed rate, heater outputs and purge air flow were necessary in order to achieve vapor space temperatures in this range. Surge testing was also completed under nominal conditions for four days with argon bubbling and one day without argon bubbling.

  7. ALTERNATE REDUCTANT COLD CAP EVALUATION FURNACE PHASE I TESTING

    SciTech Connect (OSTI)

    Johnson, F.; Miller, D.; Zamecnik, J.; Lambert, D.

    2014-04-22

    Savannah River Remediation (SRR) conducted a Systems Engineering Evaluation (SEE) to determine the optimum alternate reductant flowsheet for the Defense Waste Processing Facility (DWPF). Specifically, two proposed flowsheets (nitric–formic–glycolic and nitric–formic–sugar) were evaluated based upon results from preliminary testing. Comparison of the two flowsheets among evaluation criteria indicated a preference towards the nitric–formic–glycolic flowsheet. Further evaluation of this flowsheet eliminated the formic acid1, and as a result, the nitric–glycolic flowsheet was recommended for further testing. Based on the development of a roadmap for the nitric–glycolic acid flowsheet, Waste Solidification Engineering (WS-E) issued a Technical Task Request (TTR) to address flammability issues that may impact the implementation of this flowsheet. Melter testing was requested in order to define the DWPF flammability envelope for the nitric glycolic acid flowsheet. The Savannah River National Laboratory (SRNL) Cold Cap Evaluation Furnace (CEF), a 1/12th scale DWPF melter, was selected by the SRR Alternate Reductant project team as the melter platform for this testing. The overall scope was divided into the following sub-tasks as discussed in the Task Technical and Quality Assurance Plan (TTQAP):  Phase I - A nitric–formic acid flowsheet melter test (unbubbled) to baseline the Cold Cap Evaluation Furnace (CEF) cold cap and vapor space data to the benchmark melter flammability models  Phase II - A nitric–glycolic acid flowsheet melter test (unbubbled and bubbled) to: o Define new cold cap reactions and global kinetic parameters for the melter flammability models o Quantify off-gas surging potential of the feed o Characterize off-gas condensate for complete organic and inorganic carbon species Prior to startup, a number of improvements and modifications were made to the CEF, including addition of cameras, vessel support temperature measurement, and a heating element near the pour tube. After charging the CEF with cullet from a previous Sludge Batch 6 (SB6) run, the melter was slurry-fed with SB6-Frit 418 melter feed at 36% waste loading and was operated continuously for 6 days. Process data was collected throughout testing and included melter operation variables and off-gas chemistry. In order to satisfy the objective of Phase I testing, vapor space steady testing in the range of ~300°C-700°C was conducted without argon bubbling to baseline the melter data to the existing DWPF melter flammability model. Adjustments to heater outputs, air flows and feed rate were necessary in order to achieve the vapor space temperatures in this range. The results of the Phase I testing demonstrated that the CEF is capable of operating under the low vapor space temperatures A melter pressure of -5 inches of water was not sustained throughout the run, but the melter did remain slightly negative even with the maximum air flows required for the lowest temperature conditions were used. The auxiliary pour tube heater improved the pouring behavior at all test conditions, including reduced feed rates required for the low vapor space testing. Argon bubbling can be used to promote mixing and increase feed rate at multiple conditions. Improvements due to bubbling have been determined previously; however, the addition of the cameras to the CEF allows for visual observation during a range of bubbling configurations. The off-gas analysis system proved to be robust and capable of operating for long durations. The total operational hours on the melter vessel are approximately 385 hours. Dimensional measurements taken prior to Phase I testing and support block temperatures recorded during Phase I testing are available if an extension of service life beyond 1250 hours is desired in the future.

  8. Demonstration of anomalous heat from the cold fusion effect

    SciTech Connect (OSTI)

    Storms, E.

    1995-12-01

    Heat production by an unexpected process is the most challenging aspect of the {open_quotes}cold fusion{close_quotes} phenomenon to accept. Many studies have been done in ways that invite criticism and easy rejection. A few recent studies have attempted to eliminate obvious errors and, thereby, reduce the ease of rejection. In addition, several of these studies have revealed important variables related to improving reproducibility. This paper will describe heat measurements done at the Los Alamos National Laboratory using a closed, pressurized, stirred calorimeter having two independent methods of calibration. Results using several batches of palladium are discussed in terms of those characteristics that lead to reproducibility using the electrolytic loading technique.

  9. Cold-Climate Case Study for Affordable Zero Energy Homes

    SciTech Connect (OSTI)

    Norton, P.; Christensen, C.

    2006-01-01

    This project, supported by the U.S. Department of Energy's Building America Program, is a case study in reaching zero energy within the affordable housing sector in cold climates. The design of the 1200 square foot, 3-bedroom Denver zero energy home carefully combines envelope efficiency, efficient equipment, appliances and lighting, and passive and active solar features to reach the zero energy goal. The home was designed using an early version of the BEOpt building optimization software with additional analysis using DOE2. This engineering approach was tempered by regular discussions with Habitat construction staff and volunteers. These discussions weighed the applicability of the optimized solutions to the special needs and economics of a Habitat house--moving the design towards simple, easily maintained mechanical systems and volunteer-friendly construction techniques.

  10. Cold stress on Russian territory during last global warming

    SciTech Connect (OSTI)

    Vinogradov, V.V.

    1996-12-31

    A great part of Russian territory is characterized by climate discomfort of life. In winter cold stress covers nearly all territory. The purpose of this work is to learn how the climatic discomfort of life is affected by climate change. The effect of global warming for the period 1981--1990 on geographical distribution of bioclimatic indexes by seasons (compared with average figures) is analyzed. Indexes of enthalpy, dry cooling, wind chill, wet cooling, effective temperature, physiological deficit index for monthly average figures were calculated and the data bank for the period 1981--1990 was made up. The indexes of enthalpy, wet cooling, and dry cooling according to Bodman were chosen as the most informative and independent. Maps of the climatic indexes taking into account temperature, humidity and wind speed were made up on the basis of the calculated figures.

  11. SHEAR STRENGTH MEASURING EQUIPMENT EVALUATION AT THE COLD TEST FACILITY

    SciTech Connect (OSTI)

    MEACHAM JE

    2009-09-09

    Retrievals under current criteria require that approximately 2,000,000 gallons of double-shell tank (DST) waste storage space not be used to prevent creating new tanks that might be susceptible to buoyant displacement gas release events (BDGRE). New criteria are being evaluated, based on actual sludge properties, to potentially show that sludge wastes do not exhibit the same BDGRE risk. Implementation of the new criteria requires measurement of in situ waste shear strength. Cone penetrometers were judged the best equipment for measuring in situ shear strength and an A.P. van den berg Hyson 100 kN Light Weight Cone Penetrometer (CPT) was selected for evaluation. The CPT was procured and then evaluated at the Hanford Site Cold Test Facility. Evaluation demonstrated that the equipment with minor modification was suitable for use in Tank Farms.

  12. A strained silicon cold electron bolometer using Schottky contacts

    SciTech Connect (OSTI)

    Brien, T. L. R. Ade, P. A. R.; Barry, P. S.; Dunscombe, C.; Morozov, D. V.; Sudiwala, R. V.; Leadley, D. R.; Myronov, M.; Parker, E. H. C.; Prest, M. J.; Whall, T. E.; Prunnila, M.; Mauskopf, P. D.

    2014-07-28

    We describe optical characterisation of a strained silicon cold electron bolometer (CEB), operating on a 350 mK stage, designed for absorption of millimetre-wave radiation. The silicon cold electron bolometer utilises Schottky contacts between a superconductor and an n{sup ++} doped silicon island to detect changes in the temperature of the charge carriers in the silicon, due to variations in absorbed radiation. By using strained silicon as the absorber, we decrease the electron-phonon coupling in the device and increase the responsivity to incoming power. The strained silicon absorber is coupled to a planar aluminium twin-slot antenna designed to couple to 160?GHz and that serves as the superconducting contacts. From the measured optical responsivity and spectral response, we calculate a maximum optical efficiency of 50% for radiation coupled into the device by the planar antenna and an overall noise equivalent power, referred to absorbed optical power, of 1.110{sup ?16}?W?Hz{sup ?1/2} when the detector is observing a 300?K source through a 4?K throughput limiting aperture. Even though this optical system is not optimized, we measure a system noise equivalent temperature difference of 6?mK?Hz{sup ?1/2}. We measure the noise of the device using a cross-correlation of time stream data, measured simultaneously with two junction field-effect transistor amplifiers, with a base correlated noise level of 300?pV?Hz{sup ?1/2} and find that the total noise is consistent with a combination of photon noise, current shot noise, and electron-phonon thermal noise.

  13. Intermixing in Cu/Ni multilayers induced by cold rolling

    SciTech Connect (OSTI)

    Wang, Z.; Perepezko, J. H.; Larson, D.; Reinhard, D.

    2015-04-28

    Repeated cold rolling was performed on multilayers of Cu60/Ni40 and Cu40/Ni60 foil arrays to study the details of driven atomic scale interfacial mixing. With increasing deformation, there is a significant layer refinement down to the nm level that leads to the formation of a solid solution phase from the elemental end members. Intriguingly, the composition of the solid solution is revealed by an oscillation in the composition profile across the multilayers, which is different from the smoothly varying profile due to thermally activated diffusion. During the reaction, Cu mixed into Ni preferentially compared to Ni mixing into Cu, which is also in contrast to the thermal diffusion behavior. This is confirmed by observations from X-ray diffraction, electron energy loss spectrum and atom probe tomography. The diffusion coefficient induced by cold rolling is estimated as 1.7 × 10{sup −17} m{sup 2}/s, which cannot be attributed to any thermal effect. The effective temperature due to the deformation induced mixing is estimated as 1093 K and an intrinsic diffusivity d{sub b}, which quantifies the tendency towards equilibrium in the absence of thermal diffusion, is estimated as 6.38 × 10{sup −18} m{sup 2}/s. The fraction of the solid solution phase formed is illustrated by examining the layer thickness distribution and is described by using an error function representation. The evolution of mixing in the solid solution phase is described by a simplified sinusoid model, in which the amplitude decays with increased deformation level. The promoted diffusion coefficient could be related to the effective temperature concept, but the establishment of an oscillation in the composition profile is a characteristic behavior that develops due to deformation.

  14. High-Current Cold Cathode Employing Diamond and Related Materials

    SciTech Connect (OSTI)

    Hirshfield, Jay L.

    2014-10-22

    The essence of this project was for diamond films to be deposited on cold cathodes to improve their emission properties. Films with varying morphology, composition, and size of the crystals were deposited and the emission properties of the cathodes that utilize such films were studied. The prototype cathodes fabricated by the methods developed during Phase I were tested and evaluated in an actual high-power RF device during Phase II. These high-power tests used the novel active RF pulse compression system and the X-band magnicon test facility at US Naval Research Laboratory. In earlier tests, plasma switches were employed, while tests under this project utilized electron-beam switching. The intense electron beams required in the switches were supplied from cold cathodes embodying diamond films with varying morphology, including uncoated molybdenum cathodes in the preliminary tests. Tests with uncoated molybdenum cathodes produced compressed X-band RF pulses with a peak power of 91 MW, and a maximum power gain of 16.5:1. Tests were also carried out with switches employing diamond coated cathodes. The pulse compressor was based on use of switches employing electron beam triggering to effect mode conversion. In experimental tests, the compressor produced 165 MW in a ~ 20 ns pulse at ~18× power gain and ~ 140 MW at ~ 16× power gain in a 16 ns pulse with a ~ 7 ns flat-top. In these tests, molybdenum blade cathodes with thin diamond coatings demonstrated good reproducible emission uniformity with a 100 kV, 100 ns high voltage pulse. The new compressor does not have the limitations of earlier types of active pulse compressors and can operate at significantly higher electric fields without breakdown.

  15. Tribological Testing of Anti-Adhesive coatings for Cold Rolling Mill Rolls--Application to TiN-Coated Rolls

    SciTech Connect (OSTI)

    Ould, Choumad; Montmitonnet, Pierre; Gachon, Yves; Badiche, Xavier

    2011-05-04

    Roll life is a major issue in cold strip rolling. Roll wear may result either in too low roll roughness, bringing friction below the minimum requested for strip entrainment; or it may degrade strip surface quality. On the contrary, adhesive wear and transfer (''roll coating'', ''pick up'') may form a thick metallic deposits on the roll which increases friction excessively and degrades strip surface again [1]. The roll surface, with the help of a materials-adapted lubricant, must therefore possess anti-wear and anti-adhesive properties. Thus, High Speed Steeel (HSS) rolls show superior properties compared with standard Cr-steel rolls due to their high carbide surface coverage. Another way to improve wear and adhesion properties of surfaces is to apply hard metallic (hard-Cr) or ceramic coatings. Chromium is renowned for its excellent anti-wear and anti-adhesive properties and may serve as a reference. Here, as a first step towards alternative, optimised coatings, a PVD TiN coating has been deposited on tool steels, as previous attempts have proved TiN to be rather successful in cold rolling experiments [2,3]. Different tribological tests are reported here, giving insight in both anti-adhesive properties and fatigue life improvement.

  16. OMEGA: A NEW COLD X-RAY SIMULATION FACILITY FOR THE EVALUATION OF OPTICAL COATINGS

    SciTech Connect (OSTI)

    Fisher, J H; Newlander, C D; Fournier, K B; Beutler, D E; Coverdale, C A; May, M J; Tobin, M; Davis, J F; Shiekh, D

    2007-04-27

    We report on recent progress for the development of a new cold X-ray optical test capability using the Omega Facility located at the Laboratory for Laser Energetics (LLE) at the University of Rochester. These tests were done on the 30 kJ OMEGA laser at the Laboratory for Laser Energetics (LLE) at the University of Rochester, Rochester, NY. We conducted a six-shot series called OMEGA II on 14 July 2006 in one eight-hour day (supported by the Defense Threat Reduction Agency). The initial testing was performed using simple protected gold optical coatings on fused silica substrates. PUFFTFT analyses were completed and the specimen's thermal lateral stress and transverse stress conditions were calculated and interpreted. No major anomalies were detected. Comparison of the pre- and posttest reflective measurements coupled with the TFCALC analyses proved invaluable in guiding the analyses and interpreting the observed damage. The Omega facility is a high quality facility for performing evaluation of optical coatings and coupons and provides experience for the development of future National Ignition Facility (NIF) testing.

  17. Performance profiles of major energy producers 1995, January 1997

    SciTech Connect (OSTI)

    1997-02-01

    This publication examines developments in the operations of the major U.S. energy-producing companies on a corporate level, by major line of business, by major function within each line of business, and by geographic area.

  18. Obama Administration Announces Major Step Forward for the American...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Step Forward for the American Centrifuge Plant Obama Administration Announces Major Step ... Chu announced today that the Obama Administration reached a major milestone in its ...

  19. Recovery Act Exceeds Major Cleanup Milestone, DOE Complex Now...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recovery Act Exceeds Major Cleanup Milestone, DOE Complex Now 74 Percent Remediated Recovery Act Exceeds Major Cleanup Milestone, DOE Complex Now 74 Percent Remediated The Office ...

  20. EO 12114: Environmental Effects Abroad of Major Federal Actions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    12114 Environmental Effects Abroad of Major Federal Actions: Final Guideline (DOE, 1981) Unified Procedures Applicable to Major Federal Actions Relating to Nuclear Activities ...

  1. Environmental Effects Abroad of Major Federal Actions (CEQ, 1979...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Implementation of Executive Order 12114 Environmental Effects Abroad of Major Federal Actions: Final Guideline (DOE, 1981) EO 12114: Environmental Effects Abroad of Major Federal ...

  2. Financial News for Major Energy Companies, April - June 2004

    Gasoline and Diesel Fuel Update (EIA)

    ... Chemical Operations Higher margins and sales volumes boost earnings of the majors' chemical operations. Earnings from the majors' chemical operations were 84 percent higher in Q204 ...

  3. Primer on Clean Energy Lending: The Major Components and Options...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Primer on Clean Energy Lending: The Major Components and Options Primer on Clean Energy Lending: The Major Components and Options PDF icon Chapter 1: Primer on Clean Energy...

  4. Financial News for Major Energy Companies, Second Quarter 2006

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Second Quarter 2006 Overview The "Financial News for Major Energy Companies" is issued quarterly to report recent trends in the financial performance of the major energy ...

  5. Financial News for Major Energy Companies, Third Quarter 2006

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Third Quarter 2006 Overview The "Financial News for Major Energy Companies" is issued quarterly to report recent trends in the financial performance of the major energy companies. ...

  6. Highly Enriched Uranium Materials Facility, Major Design Changes...

    Energy Savers [EERE]

    Highly Enriched Uranium Materials Facility, Major Design Changes Late...Lessons Learned Report, NNSA, Dec 2010 Highly Enriched Uranium Materials Facility, Major Design Changes...

  7. 2011 Radiological Monitoring Results Associated with the Advanced Test Reactor Complex Cold Waste Pond

    SciTech Connect (OSTI)

    Mike Lewis

    2012-02-01

    This report summarizes radiological monitoring performed of the Idaho National Laboratory Site's Advanced Test Reactor Complex Cold Waste wastewater prior to discharge into the Cold Waste Pond and of specific groundwater monitoring wells associated with the Industrial Wastewater Reuse Permit (LA-000161-01, Modification B). All radiological monitoring is performed to fulfill Department of Energy requirements under the Atomic Energy Act.

  8. 2010 Radiological Monitoring Results Associated with the Advance Test Reactor Complex Cold Waste Pond

    SciTech Connect (OSTI)

    mike lewis

    2011-02-01

    This report summarizes radiological monitoring performed of the Idaho National Laboratory Sites Advanced Test Reactor Complex Cold Waste wastewater prior to discharge into the Cold Waste Pond and of specific groundwater monitoring wells associated with the Industrial Wastewater Reuse Permit (#LA-000161-01, Modification B). All radiological monitoring is performed to fulfill Department of Energy requirements under the Atomic Energy Act.

  9. 2014 Radiological Monitoring Results Associated with the Advanced Test Reactor Complex Cold Waste Pond

    SciTech Connect (OSTI)

    Lewis, Mike

    2015-02-01

    This report summarizes radiological monitoring performed of the Idaho National Laboratory Site’s Advanced Test Reactor Complex Cold Waste wastewater prior to discharge into the Cold Waste Pond and of specific groundwater monitoring wells associated with the Industrial Wastewater Reuse Permit (#LA-000161-01, Modification B). All radiological monitoring is performed to fulfill Department of Energy requirements under the Atomic Energy Act.

  10. 2013 Radiological Monitoring Results Associated with the Advanced Test Reactor Complex Cold Waste Pond

    SciTech Connect (OSTI)

    Mike Lewis

    2014-02-01

    This report summarizes radiological monitoring performed of the Idaho National Laboratory Site’s Advanced Test Reactor Complex Cold Waste wastewater prior to discharge into the Cold Waste Pond and of specific groundwater monitoring wells associated with the Industrial Wastewater Reuse Permit (#LA-000161-01, Modification B). All radiological monitoring is performed to fulfill Department of Energy requirements under the Atomic Energy Act.

  11. Effect of Feeding Rate on the Cold Cap Configuration in a Laboratory-Scale Melter - 13362

    SciTech Connect (OSTI)

    Dixon, Derek R.; Schweiger, Michael J.; Hrma, Pavel; Division of Advanced Nuclear Engineering, Pohang University of Science and Technology, Pohang

    2013-07-01

    High-level-waste melter feed is converted into glass in a joule-heated melter, where it forms a floating layer of reacting feed, called the cold cap. After the glass-forming phase becomes connected, evolving gases produce bubbles that form a foam layer under the feed. The bubbles coalesce into cavities, from which most of the gases are released around the edges of the cold cap while gases also escape through small shafts in the reacting feed. The foam layer insulates the cold cap from the heat transferred from the molten glass below. The cold cap behavior was investigated in a laboratory-scale assembly with a fused silica crucible. A high-alumina waste simulant was fed into the crucible and the feed charging rate was varied from 3 to 7 mL min{sup -1}. After a fixed amount of time (35 min), feed charging was stopped and the crucible was removed from the furnace and quenched on a copper block to preserve the structure of the cold cap during cooling. During the rapid quenching, thermal cracking of the glass and cold cap allowed it to be broken up into sections for analysis. The effect of the charging rate on the height, area and volume of the cold cap was determined. The size of the bubbles collected in the foam layer under the feed increased as the cold cap expanded and the relationship between these bubbles and temperature will be determined for input into a mathematical model. (authors)

  12. Method of manufacturing metallic products such as sheet by cold working and flash annealing

    DOE Patents [OSTI]

    Hajaligol, Mohammad R.; Sikka, Vinod K.

    2000-01-01

    A metallic alloy composition is manufactured into products such as press formed or stamped products or rolled products such as sheet, strip, rod, wire or band by one or more cold working steps with intermediate or final flash annealing. The method can include cold rolling an iron, nickel or titanium aluminide alloy and annealing the cold worked product in a furnace by infrared heating. The flash annealing is preferably carried out by rapidly heating the cold worked product to an elevated temperature for less than one minute. The flash annealing is effective to reduce surface hardness of the cold worked product sufficiently to allow further cold working. The product to be cold worked can be prepared by casting the alloy or by a powder metallurgical technique such as tape casting a mixture of metal powder and a binder, roll compacting a mixture of the powder and a binder or plasma spraying the powder onto a substrate. In the case of tape casting or roll compaction, the initial powder product can be heated to a temperature sufficient to remove volatile components. The method can be used to form a cold rolled sheet which is formed into an electrical resistance heating element capable of heating to 900.degree. C. in less than 1 second when a voltage up to 10 volts and up to 6 amps is passed through the heating element.

  13. Method of manufacturing metallic products such as sheet by cold working and flash anealing

    DOE Patents [OSTI]

    Hajaligol, Mohammad R.; Sikka, Vinod K.

    2001-01-01

    A metallic alloy composition is manufactured into products such as press formed or stamped products or rolled products such as sheet, strip, rod, wire or band by one or more cold working steps with intermediate or final flash annealing. The method can include cold rolling an iron, nickel or titanium aluminide alloy and annealing the cold worked product in a furnace by infrared heating. The flash annealing is preferably carried out by rapidly heating the cold worked product to an elevated temperature for less than one minute. The flash annealing is effective to reduce surface hardness of the cold worked product sufficiently to allow further cold working. The product to be cold worked can be prepared by casting the alloy or by a powder metallurgical technique such as tape casting a mixture of metal powder and a binder, roll compacting a mixture of the powder and a binder or plasma spraying the powder onto a substrate. In the case of tape casting or roll compaction, the initial powder product can be heated to a temperature sufficient to remove volatile components. The method can be used to form a cold rolled sheet which is formed into an electrical resistance heating element capable of heating to 900.degree. C. in less than 1 second when a voltage up to 10 volts and up to 6 amps is passed through the heating element.

  14. 2012 Radiological Monitoring Results Associated with the Advanced Test Reactor Complex Cold Waste Pond

    SciTech Connect (OSTI)

    Mike Lewis

    2013-02-01

    This report summarizes radiological monitoring performed of the Idaho National Laboratory Site’s Advanced Test Reactor Complex Cold Waste wastewater prior to discharge into the Cold Waste Pond and of specific groundwater monitoring wells associated with the Industrial Wastewater Reuse Permit (#LA-000161-01, Modification B). All radiological monitoring is performed to fulfill Department of Energy requirements under the Atomic Energy Act.

  15. Regulatory Networks Controlling Plant Cold Acclimation or Low Temperature Regulatory Networks Controlling Cold Acclimation in Arabidopsis (2011 JGI User Meeting)

    SciTech Connect (OSTI)

    Thomashow, Mike

    2011-03-23

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Mike Thomashow of Michigan State University gives a presentation on on "Low Temperature Regulatory Networks Controlling Cold Acclimation in Arabidopsis" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011.

  16. Regulatory Networks Controlling Plant Cold Acclimation or Low Temperature Regulatory Networks Controlling Cold Acclimation in Arabidopsis (2011 JGI User Meeting)

    ScienceCinema (OSTI)

    Thomashow, Mike

    2011-06-03

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Mike Thomashow of Michigan State University gives a presentation on on "Low Temperature Regulatory Networks Controlling Cold Acclimation in Arabidopsis" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011. «

  17. Creep-Rupture Behavior and Recrystallization in Cold-Bent Boiler Tubing for USC Applications

    SciTech Connect (OSTI)

    Shingledecker, John P

    2008-01-01

    Creep-rupture experiments were conducted on candidate Ultrasupercritical (USC) alloy tubes to evaluate the effects of cold-work and recrystallization during high-temperature service. These creep tests were performed by internally pressurizing cold-bent boiler tubes at 775 C for times up to 8000 hours. The bends were fabricated with cold-work levels beyond the current ASME Boiler and Pressure Vessel (ASME B&PV) Code Section I limits for austenitic stainless steels. Destructive metallographic evaluation of the crept tube bends was used to determine the effects of cold-work and the degree of recrystallization. The metallographic analysis combined with an evaluation of the creep and rupture data suggest that solid-solution strengthened nickel-based alloys can be fabricated for high-temperature service at USC conditions utilizing levels of cold-work higher than the current allowed levels for austenitic stainless steels.

  18. Delusion is the better part of Grandeur: Lessons learned from cold fusion

    SciTech Connect (OSTI)

    Taubes, G.

    1995-04-01

    On March 23, 1989, Stan Pons and Martin Fleischmann, backed by the administration of the University of Utah, claimed the discovery of cold nuclear fusion, a phenomenon that defied known physical law by 50 to 60 orders of magnitude and was quickly (although not that quickly) shown to be dead wrong. With that in mind, the proponents of cold fusion have already held a Fourth International Conference on Cold Fusion. The question, of course, is if cold fusion does not exist, what are these people doing, and why? And secondly, what`s the matter with science journalism that a phenomenon like cold fusion is not only covered so poorly, but that the journalists are as responsible as anyone else for making it happen?

  19. Incorporating Cold Cap Behavior in a Joule-heated Waste Glass Melter Model

    SciTech Connect (OSTI)

    Varija Agarwal; Donna Post Guillen

    2013-08-01

    In this paper, an overview of Joule-heated waste glass melters used in the vitrification of high level waste (HLW) is presented, with a focus on the cold cap region. This region, in which feed-to-glass conversion reactions occur, is critical in determining the melting properties of any given glass melter. An existing 1D computer model of the cold cap, implemented in MATLAB, is described in detail. This model is a standalone model that calculates cold cap properties based on boundary conditions at the top and bottom of the cold cap. Efforts to couple this cold cap model with a 3D STAR-CCM+ model of a Joule-heated melter are then described. The coupling is being implemented in ModelCenter, a software integration tool. The ultimate goal of this model is to guide the specification of melter parameters that optimize glass quality and production rate.

  20. Major Communications Report February 23, 2009 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    February 23, 2009 Major Communications Report February 23, 2009 This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of February 23, 2009. Office spreadsheet icon DOE_Major_Communications_022

  1. Major Communications Report March 13, 2009 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    13, 2009 Major Communications Report March 13, 2009 This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of March 13, 2009. Office spreadsheet icon DOE_Major_Communications_0313

  2. Major Communications Report March 24, 2009 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    24, 2009 Major Communications Report March 24, 2009 This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of March 24, 2009. Office spreadsheet icon DOE_Major_Communications_0324

  3. PIA - WEB Physical Security Major Application | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Physical Security Major Application PIA - WEB Physical Security Major Application PIA - WEB Physical Security Major Application PDF icon PIA - WEB Physical Security Major Application More Documents & Publications PIA - WEB Unclassified Business Operations General Support System Occupational Medical Surveillance System (OMSS) PIA, Idaho National Laboratory PIA - Advanced Test Reactor National Scientific User Facility Users Week 2009

  4. OTEC Advanced Composite Cold Water Pipe: Final Technical Report

    SciTech Connect (OSTI)

    Dr. Alan Miller; Matthew Ascari

    2011-09-12

    Ocean Thermal Energy Conversion can exploit natural temperature gradients in the oceans to generate usable forms of energy (for example, cost-competitive baseload electricity in tropical regions such as Hawaii) free from fossil fuel consumption and global warming emissions.The No.1 acknowledged challenge of constructing an OTEC plant is the Cold Water Pipe (CWP), which draws cold water from 1000m depths up to the surface, to serve as the coolant for the OTEC Rankine cycle. For a commercial-scale plant, the CWP is on the order of 10m in diameter.This report describes work done by LMSSC developing the CWP for LM MS2 New Ventures emerging OTEC business. The work started in early 2008 deciding on the minimum-cost CWP architecture, materials, and fabrication process. In order to eliminate what in previous OTEC work had been a very large assembly/deployment risk, we took the innovative approach of building an integral CWP directly from theOTEC platform and down into the water. During the latter half of 2008, we proceeded to a successful small-scale Proof-of-Principles validation of the new fabrication process, at the Engineering Development Lab in Sunnyvale. During 2009-10, under the Cooperative Agreement with the US Dept. of Energy, we have now successfully validated key elements of the process and apparatus at a 4m diameter scale suitable for a future OTEC Pilot Plant. The validations include: (1) Assembly of sandwich core rings from pre-pultruded hollow 'planks,' holding final dimensions accurately; (2) Machine-based dispensing of overlapping strips of thick fiberglass fabric to form the lengthwise-continuous face sheets, holding accurate overlap dimensions; (3) Initial testing of the fabric architecture, showing that the overlap splices develop adequate mechanical strength (work done under a parallel US Naval Facilities Command program); and (4) Successful resin infusion/cure of 4m diameter workpieces, obtaining full wet-out and a non-discernable knitline between successive stepwise infusions.

  5. Barrier for cold-fusion production of superheavy elements

    SciTech Connect (OSTI)

    Ichikawa, Takatoshi; Iwamoto, Akira; Moeller, Peter; Sierk, Arnold J.

    2005-04-01

    We estimate the fusion-barrier height B{sub fu}{sup (two-body)} for approaching ions in cold-fusion reactions in a model where the projectile deformation and quadrupole zero-point vibrational energy are taken into account. This barrier height is defined as the barrier energy at the target and projectile separation distance where an original oblate deformation of projectile and/or target caused by a repulsive Coulomb force turns into a large prolate deformation caused by the attractive nuclear force as the target and projectile come closer. The instability develops before touching because the attractive short-range nuclear force overcomes the repulsive Coulomb force and the shape-stabilizing effect of shell structure. The shell structure of the doubly magic {sup 208}Pb target is sufficiently strong that its shape remains very close to spherical in all cases studied here. The fusion potential for approaching ions in the two-body channel is calculated in the macroscopic-microscopic model with the quadrupole vibrational zero-point energy obtained in the WKB approximation. We compare our results with data from 10 experimental cold-fusion reactions and with the Bass barriers. Differences and similarities between the Yukawa-plus-exponential model and the Bass model are discussed. We also calculate five-dimensional potential-energy surfaces for the single compound system and show that well-established fission and fusion valleys are both present. For heavy systems, B{sub fu}{sup (two-body)} becomes lower than the fission barrier just beyond the ground state of the compound system. In the vicinity of this transition, the optimum collision energy for formation of evaporation residues can be expected to depend in a delicate fashion on the interplay among B{sub fu}{sup (two-body)}, the fusion valley, the fission barrier of the compound system, and the one- and two-neutron separation energies S{sub 1n} and S{sub 2n}. We discuss these issues in detail and calculate fission-barrier heights. Except for reactions in which the projectile is doubly magic or near doubly magic, the calculated quantities are consistent with the observed optimal energies for evaporation-residue formation.

  6. Abstracts of papers presented at the LVIII Cold Spring Harbor Symposium on quantitative Biology: DNA and chromosomes

    SciTech Connect (OSTI)

    Not Available

    1993-12-31

    This volume contains the abstracts of oral and poster presentations made at the LVIII Cold Spring Harbor Symposium on Quantitative Biology entitles DNA & Chromosomes. The meeting was held June 2--June 9, 1993 at Cold Spring Harbor, New York.

  7. Major Risk Factors Integrated Facility Disposition Project - Oak Ridge |

    Energy Savers [EERE]

    Biomass Program Major DOE Biofuels Project Locations in the United States PDF icon Major DOE Biofuels Project Locations More Documents & Publications Major DOE Biofuels Project Locations Major DOE Biofuels Project Locations Algal Biofuel Technologies

    Slide 1 The Current State of Technology for Cellulosic Ethanol

    Algal Biofuel Technologies Slide 1

    101 Major Program Offices Doing Business with... Energy Efficiency and Renewable Energy Office of Environmental Management

  8. Updated Appendices to the Status of Environmental Management Initiatives to Accelerate the Reduction of Environmental Risks and Challenges Posed by the Legacy of the Cold War Report to Congress

    Broader source: Energy.gov [DOE]

    Responding to the requirements in the FY 2010 Energy and Water Development Appropriations Report (H.R. 111-203) EM updated Appendices A and B of the prior year's National Defense Authorization Act (NDAA) Report.

  9. HERSCHEL REVEALS MASSIVE COLD CLUMPS IN NGC 7538

    SciTech Connect (OSTI)

    Fallscheer, C.; Di Francesco, J.; Sadavoy, S.; Reid, M. A.; Martin, P. G.; Nguyen-Luong, Q.; Hill, T.; Hennemann, M.; Motte, F.; Men'shchikov, A.; Andre, Ph.; Konyves, V.; Sauvage, M.; Griffin, M.; Rygl, K. L. J.; Benedettini, M.; Schneider, N.; Anderson, L. D. [Laboratoire d'Astrophysique de Marseille, CNRS and others

    2013-08-20

    We present the first overview of the Herschel observations of the nearby high-mass star-forming region NGC 7538, taken as part of the Herschel imaging study of OB young stellar objects (HOBYS) Key Programme. These PACS and SPIRE maps cover an approximate area of one square degree at five submillimeter and far-infrared wavebands. We have identified 780 dense sources and classified 224 of those. With the intention of investigating the existence of cold massive starless or class 0-like clumps that would have the potential to form intermediate- to high-mass stars, we further isolate 13 clumps as the most likely candidates for follow-up studies. These 13 clumps have masses in excess of 40 M{sub Sun} and temperatures below 15 K. They range in size from 0.4 pc to 2.5 pc and have densities between 3 Multiplication-Sign 10{sup 3} cm{sup -3} and 4 Multiplication-Sign 10{sup 4} cm{sup -3}. Spectral energy distributions are then used to characterize their energetics and evolutionary state through a luminosity-mass diagram. NGC 7538 has a highly filamentary structure, previously unseen in the dust continuum of existing submillimeter surveys. We report the most complete imaging to date of a large, evacuated ring of material in NGC 7538 which is bordered by many cool sources.

  10. Solid state consolidation nanocrystalline copper-tungsten using cold spray

    SciTech Connect (OSTI)

    Hall, Aaron Christopher; Sarobol, Pylin; Argibay, Nicolas; Clark, Blythe; Diantonio, Christopher

    2015-09-01

    It is well known that nanostructured metals can exhibit significantly improved properties compared to metals with conventional grain size. Unfortunately, nanocrystalline metals typically are not thermodynamically stable and exhibit rapid grain growth at moderate temperatures. This severely limits their processing and use, making them impractical for most engineering applications. Recent work has shown that a number of thermodynamically stable nanocrystalline metal alloys exist. These alloys have been prepared as powders using severe plastic deformation (e.g. ball milling) processes. Consolidation of these powders without compromise of their nanocrystalline microstructure is a critical step to enabling their use as engineering materials. We demonstrate solid-state consolidation of ball milled copper-tantalum nanocrystalline metal powder using cold spray. Unfortunately, the nanocrystalline copper-tantalum powder that was consolidated did not contain the thermodynamically stable copper-tantalum nanostructure. Nevertheless, this does this demonstrates a pathway to preparation of bulk thermodynamically stable nanocrystalline copper-tantalum. Furthermore, it demonstrates a pathway to additive manufacturing (3D printing) of nanocrystalline copper-tantalum. Additive manufacturing of thermodynamically stable nanocrystalline metals is attractive because it enables maximum flexibility and efficiency in the use of these unique materials.

  11. Compressor Selection and Equipment Sizing for Cold Climate Heat Pumps

    SciTech Connect (OSTI)

    Shen, Bo; Abdelaziz, Omar; Rice, C Keith

    2014-01-01

    In order to limit heating capacity degradation at -25 C (-13 F) ambient to 25%, compared to the nominal rating point capacity at 8.3 C (47 F), an extensive array of design and sizing options were investigated, based on fundamental equipment system modeling and building energy simulation. Sixteen equipment design options were evaluated in one commercial building and one residential building, respectively in seven cities. The energy simulation results were compared to three baseline cases: 100% electric resistance heating, a 9.6 HSPF single-speed heat pump unit, and 90% AFUE gas heating system. The general recommendation is that variable-speed compressors and tandem compressors, sized such that their rated heating capacity at a low speed matching the building design cooling load, are able to achieve the capacity goal at low ambient temperatures by over-speeding, for example, a home with a 3.0 ton design cooling load, a tandem heat pump could meet this cooling load running a single compressor, while running both compressors to meet heating load at low ambient temperatures in a cold climate. Energy savings and electric resistance heat reductions vary with building types, energy codes and climate zones. Oversizing a heat pump can result in larger energy saving in a less energy efficient building and colder regions due to reducing electric resistance heating. However, in a more energy-efficient building or for buildings in warmer climates, one has to consider balance between reduction of resistance heat and addition of cyclic loss.

  12. Latest cold fusion results fail to win over skeptics

    SciTech Connect (OSTI)

    Dagani, R.

    1993-06-14

    It's been four years since electrochemists Martin Fleischmann and Stanley Pons polarized the scientific community into two camps: those who believe they discovered a new phenomenon, dubbed cold fusion, and those who do not. Now, a new calorimetry paper coauthored by Pons and Fleischmann has dumped fresh fuel on the fire, but it doesn't seem to be changing anyone's mind. The paper in question, titled [open quotes]Calorimetry of the Pd-D[sub 2]O system: from simplicity via complications to simplicity[close quotes], was published in the May 3 issue of Physics Letters. As in their earlier work at the University of Utah, Pons and Fleischmann, now working in a Japanese-funded laboratory in the south of France, electrolyze heavy water in open cells containing a palladium cathode and a platinum anode. And, as before, they observe the production of high rates of excess enthalpy--more enthalpy (heat content) than was put into the system and more, they say, than can be accounted for by the chemical changes occurring. So much heat is generated, in fact, that the electrolyte (D[sub 2]O and Li[sub 2]SO[sub 4]) eventually begins to boil. This paper describes the continuing controversy.

  13. Warm and cold fermionic dark matter via freeze-in

    SciTech Connect (OSTI)

    Klasen, Michael; Yaguna, Carlos E. E-mail: carlos.yaguna@uni-muenster.de

    2013-11-01

    The freeze-in mechanism of dark matter production provides a simple and intriguing alternative to the WIMP paradigm. In this paper, we analyze whether freeze-in can be used to account for the dark matter in the so-called singlet fermionic model. In it, the SM is extended with only two additional fields, a singlet scalar that mixes with the Higgs boson, and the dark matter particle, a fermion assumed to be odd under a Z{sub 2} symmetry. After numerically studying the generation of dark matter, we analyze the dependence of the relic density with respect to all the free parameters of the model. These results are then used to obtain the regions of the parameter space that are compatible with the dark matter constraint. We demonstrate that the observed dark matter abundance can be explained via freeze-in over a wide range of masses extending down to the keV range. As a result, warm and cold dark matter can be obtained in this model. It is also possible to have dark matter masses well above the unitarity bound for WIMPs.

  14. The Performance House - A Cold Climate Challenge Home

    SciTech Connect (OSTI)

    Puttagunta, S.; Grab, J.; Williamson, J.

    2013-08-01

    Working with builder partners on test homes allows for vetting of whole-house building strategies to eliminate any potential unintended consequences prior to implementing these solution packages on a production scale. To support this research, CARB partnered with Preferred Builders Inc. on a high-performance test home in Old Greenwich, CT. The philosophy and science behind the 2,700 ft2 "Performance House" was based on the premise that homes should be safe, healthy, comfortable, durable, efficient, and adapt with the homeowners. The technologies and strategies used in the "Performance House" were not cutting-edge, but simply "best practices practiced". The focus was on simplicity in construction, maintenance, and operation. When seeking a 30% source energy savings targets over a comparable 2009 IECC code-built home in the cold climate zone, nearly all components of a home must be optimized. Careful planning and design are critical. To help builders and architects seeking to match the performance of this home, a step-by-step guide through the building shell components of DOE's Challenge Home are provided in a pictorial story book. The end result was a DOE Challenge Home that achieved a HERS Index Score of 20 (43 without PV, the minimum target was 55 for compliance). This home was also awarded the 2012 HOBI for Best Green Energy Efficient Home from the Home Builders & Remodelers Association of Connecticut.

  15. Introduction Yucca Lady, a World War II Boeing-17G Flying Fortress Army Air Force serial number

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Yucca Lady, a World War II Boeing-17G Flying Fortress Army Air Force serial number 44-83575, was flown to the Nevada Test Site (now known as the Nevada National Security Site - NNSS) in 1952, where she was instrumented and subjected to three atmospheric nuclear tests as part of the Operation Tumbler-Snapper -- Vulnerability of Parked Aircraft to Atomic Bombs series, conducted in April and May 1952. The project would determine the effects of a nuclear device detonated above an airfield,

  16. Air Source Heat Pumps for Cold Climate Applications: Recent U. S. R&D Results from IEA HPP Annex 41

    SciTech Connect (OSTI)

    Baxter, Van D; Groll, Dr. Eckhard A.; Shen, Bo

    2014-01-01

    Air source heat pumps are easily applied to buildings almost anywhere. They are widespread in milder climate regions but their use in cold regions is hampered due to low efficiency and heating capacity at cold outdoor temperatures. This article describes selected R&D activities aimed at improving their cold weather performance.

  17. Examination of claims of Miles et al. in Pons-Fleischmann-type cold fusion experiments

    SciTech Connect (OSTI)

    Jones, S.E.; Hansen, L.D.

    1995-05-04

    In cold fusion experiments conducted at the Naval Research Laboratory in China Lake, M. H. Miles and co-workers claim to have produced excess heat correlated with helium-4 production, X-rays, and Geiger-counter excitation. However, scrutiny of the claims shows that unreliable calorimetric and nuclear-product detection methods were used. Moreover, inconsistencies and errors are found in the data and data analysis. The juxtaposition of several poor techniques and inconsistent data does not make a compelling case for cold fusion. We conclude that the evidence for cold fusion from these efforts is far from compelling. 20 refs., 2 figs., 2 tabs.

  18. DEVELOPMENT OF A HIGH PERFORMANCE COLD CLIMATE HEAT PUMP

    SciTech Connect (OSTI)

    Horton, W. Travis; Groll, Eckhard A.; Braun, James E.

    2014-06-01

    The primary goals of the proposed project were to develop, test, and evaluate a high performance and cost-effective vapor compression air-source heat pump for use in cold climate regions. Vapor compression heat pumps are a proven technology, and have been used for many years to meet heating requirements for buildings in residential, commercial, and industrial applications. However, in climate regions that experience very low outdoor ambient temperatures both the heating capacity and coefficient of performance (COP) of traditional air-source vapor compression heat pumps drops dramatically with a decrease in the outdoor air temperature. The efficiency of heat pumping equipment has improved substantially over the past 20 years; however, the efficiencies of the highest rated equipment on the market are approaching practical limits that cannot be surpassed without modifications to the basic cycle and possibly the use of additional hardware. In this report, three technologies to improve the efficiency of vapor compression systems are described. These are a) vapor injected compression, b) oil flooded compression and c) hybrid flow control of the evaporator. Compressor prototypes for both, oil flooded and vapor injected compression were developed by Emerson Climate Technologies. For the oil flooded compressor, the oil injection port location was optimized and an internal oil separator was added using several design iterations. After initial testing at Emerson Climate Technologies, further testing was done at Purdue University, and compressor models were developed. These models were then integrated into a system model to determine the achievable improvement of seasonal energy efficiency (SEER) for Minneapolis (Minnesota) climate. For the oil flooded compression, a 34% improvement in seasonal energy efficiency was found while a 21% improvement in seasonal energy efficiency ratio was found for the vapor injected compression. It was found that one benefit of both tested compression technologies is a lower discharge temperature, which allows for continued operation at lower ambient temperatures. A bin analysis of the vapor injected prototype cold climate heat pump predicts a 6% improvement in HSPF for Minneapolis. This improvement is mainly a result of the increased capacity of the system for active vapor injection. For the oil flooded system, a slightly larger performance improvement is predicted, in this case mostly caused by an increase in heating COP. Based on an economic analysis of these results, the maximum additional cost of the system changes, for the Minneapolis location, are $430 for the vapor injected system and $391 for the oil flooded system. These estimates assume that a 3-year simple payback period is accepted by the customer. For the hybrid flow control of evaporators, a new type of balancing valve was developed together with Emerson Climate technologies to reduce the cost of the control scheme. In contrast to conventional stepper motor valves, this valve requires less cables and can be driven by a cheaper output circuit on the control board. The correct valve size was determined in a dedicated test stand in several design iterations. The performance benefits of the hybrid control of the evaporator coil were determined for clean coil conditions as well as with partial blockage of the air inlet grille and under frosting conditions. For clean coil conditions, the benefits in terms of COP and capacity are negligible. However, significant benefits were noted for severely air-maldistributed operating conditions. For the H2-test, the maximum COP improvement of 17% along with a capacity improvement of nearly 40% was observed. Overall, the hybrid control scheme leads to a significant amount of performance improvement, if the air inlet conditions to the evaporator are maldistributed.

  19. Integrated Pilot Plant for a Large Cold Crucible Induction Melter

    SciTech Connect (OSTI)

    Do Quang, R.; Jensen, A.; Prod'homme, A.; Fatoux, R.; Lacombe, J.

    2002-02-26

    COGEMA has been vitrifying high-level liquid waste produced during nuclear fuel reprocessing on an industrial scale for over 20 years, with two main objectives: containment of the long lived fission products and reduction of the final volume of waste. Research performed by the French Atomic Energy Commission (CEA) in the 1950s led to the selection of borosilicate glass as the most suitable containment matrix for waste from spent nuclear fuel and to the development of the induction melter technology. This was followed by the commissioning of the Marcoule Vitrification Facility (AVM) in 1978. The process was implemented at a larger scale in the late 1980s in the R7 and T7 facilities of the La Hague reprocessing plant. COGEMA facilities have produced more than 11,000 high level glass canisters, representing more than 4,500 metric tons of glass and 4.5 billion curies. To further improve the performance of the vitrification lines in the R7 and T7 facilities, the CEA and COGEMA have been developing the Cold Crucible Melter (CCM) technology since the 1980s. This technology benefits from the 20 years of COGEMA HLW vitrification experience and ensures a virtually unlimited equipment service life and extensive flexibility in dealing with different types of waste. The high specific power directly transferred by induction to the melt allows high operating temperatures without any impact on the process equipment. In addition, the mechanical stirring of the melter significantly reduces operating constraints. COGEMA is already providing the CCM technology to international customers for nuclear and non-nuclear applications and plans to implement it in the La Hague vitrification plant for the vitrification of highly concentrated and corrosive solutions produced by uranium/molybdenum fuel reprocessing. The paper presents the CCM project that led to the building and start-up of this evolutionary and flexible pilot plant. It also describes the plant's technical characteristics and reports commissioning results.

  20. The Phoenix stream: A cold stream in the southern hemisphere

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Balbinot, E.

    2016-03-17

    In this study, we report the discovery of a stellar stream in the Dark Energy Survey (DES) Year 1 (Y1A1) data. The discovery was made through simple color-magnitude filters and visual inspection of the Y1A1 data. We refer to this new object as the Phoenix stream, after its resident constellation. After subtraction of the background stellar population we detect a clear signal of a simple stellar population. By fitting the ridge line of the stream in color-magnitude space, we find that a stellar population with agemore » $$\\tau=11.5\\pm0.5$$ Gyr and $[Fe/H]<-1.6$ located 17.5$$\\pm$$0.9 kpc from the Sun gives an adequate description of the stream stellar population. The stream is detected over an extension of 8$$^{\\circ}.$$1 (2.5 kpc) and has a width of $$\\sim$$54 pc assuming a Gaussian profile, indicating that a globular cluster is a probable progenitor. There is no known globular cluster within 5 kpc compatible with being the progenitor of the stream, assuming that the stream traces its orbit. We examined overdensities along the stream, however no obvious counterpart bound stellar system is visible in the coadded images. We also find overdensities along the stream that appear to be symmetrically distributed - consistent with the epicyclic overdensity scenario for the formation of cold streams - as well as a misalignment between the Northern and Southern part of stream. Despite the close proximity we find no evidence that this stream and the halo cluster NGC 1261 have a common accretion origin linked to the recently found EriPhe overdensity (Li et al. 2016).« less

  1. BEAM TRANSPORT AND STORAGE WITH COLD NEUTRAL ATOMS AND MOLECULES

    SciTech Connect (OSTI)

    Walstrom, Peter L.

    2012-05-15

    A large class of cold neutral atoms and molecules is subject to magnetic field-gradient forces. In the presence of a field, hyperfine atomic states are split into several Zeeman levels. The slopes of these curves vs. field are the effective magnetic moments. By means of optical pumping in a field, Zeeman states of neutral lithium atoms and CaH molecules with effective magnetic moments of nearly {+-} one Bohr magneton can be selected. Particles in Zeeman states for which the energy increases with field are repelled by increasing fields; particles in states for which the energy decreases with field are attracted to increasing fields. For stable magnetic confinement, field-repelled states are required. Neutral-particle velocities in the present study are on the order of tens to hundreds of m/s and the magnetic fields needed for transport and injection are on the order of in the range of 0.01-1T. Many of the general concepts of charged-particle beam transport carry over into neutral particle spin-force optics, but with important differences. In general, the role of bending dipoles in charged particle optics is played by quadrupoles in neutral particle optics; the role of quadrupoles is played by sextupoles. The neutralparticle analog of charge-exchange injection into storage rings is the use of lasers to flip the state of particles from field-seeking to field-repelled. Preliminary tracking results for two neutral atom/molecule storage ring configurations are presented. It was found that orbit instabilities limit the confinment time in a racetrack-shaped ring with discrete magnetic elements with drift spaces between them; stable behavior was observed in a toroidal ring with a continuous sextupole field. An alternative concept using a linear sextupole or octupole channel with solenoids on the ends is presently being considered.

  2. Cold cap subsidence for in situ vitrification and electrodes therefor

    DOE Patents [OSTI]

    Buelt, James L.; Carter, John G.; Eschbach, Eugene A.; FitzPatrick, Vincent F.; Koehmstedt, Paul L.; Morgan, William C.; Oma, Kenton H.; Timmerman, Craig L.

    1992-01-01

    An electrode for use in in situ vitrification of soil comprises a molybdenum rod received within a conductive sleeve or collar formed of graphite. Electrodes of this type are placed on either side of a region containing buried waste material and an electric current is passed therebetween for vitrifying the soil between the electrodes. The graphite collar enhances the thermal conductivity of the electrode, bringing heat to the surface, and preventing the formation of a cold cap of material above the ground surface. The annulus between the molybdenum rod electrode and the graphite collar is filled with a conductive ceramic powder of a type that sinters upon the molybdenum rod, protecting the same from oxidation as the graphite material is consumed, or a metal powder which liquifies at operating temperatures. The molybdenum rod in the former case may be coated with an oxidation protectant, e.g. of molybdenum disilicide. As insulative blanket is suitably placed on the surface of the soil during processing to promote subsidence by allowing off-gassing and reducing surface heat loss. In other embodiments, connection to vitrification electrodes is provided below ground level to avoid loss of connection due to electrodes deterioration, or a sacrificial electrode may be employed when operation is started. Outboard electrodes can be utilized to square up the vitrified area. Further, the center of the molybdenum rod can be made hollow and filled with a powdered metal, such as copper, which liquifies at operating temperatures. In one embodiment, the molybdenum rod and the graphite collar are physically joined at the bottom.

  3. Cold collisions of highly rotationally excited CO{sub 2} with He: The prospects for cold chemistry with super-rotors

    SciTech Connect (OSTI)

    Al-Qady, W. H.; Forrey, R. C.; Yang, B. H.; Stancil, P. C.; Balakrishnan, N.

    2011-11-15

    Building on recent advances in ultrafast lasers and methods to slow molecules, an experiment is proposed to produce translationally cold CO{sub 2} super-rotors (j{approx}200) by combining an optical centrifuge with helium-buffer-gas cooling. Quantum mechanical calculations of the complex scattering length for He-CO{sub 2} collisions demonstrate that the efficiency of rotational quenching decreases rapidly with increasing rotational excitation j in the ultracold regime. Extrapolating to helium cryogenic temperatures, rotational quenching is predicted to remain inefficient up to {approx}1 K, allowing for the possible creation of a beam of translationally cold, rotationally hot molecules.

  4. Building America Best Practices Series: Volume 3; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in Cold and Very Cold Climates

    SciTech Connect (OSTI)

    Not Available

    2005-08-01

    This best practices guide is part of a series produced by Building America. The guide book is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the cold and very cold climates. The savings are in comparison with the 1993 Model Energy Code. The guide contains chapters for every member of the builder's team-from the manager to the site planner to the designers, site supervisors, the trades, and marketers. There is also a chapter for homeowners on how to use the book to provide help in selecting a new home or builder.

  5. Y-12 fulfills major milestone in fuel conversion commitment for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fulfills major ... Y-12 fulfills major milestone in fuel conversion commitment for Jamaican research reactor Posted: June 3, 2014 - 4:42pm The Y-12 National Security Complex...

  6. Disruption of Hydrogen Bonds between Major Histocompatibility Complex Class

    Office of Scientific and Technical Information (OSTI)

    II and the Peptide NTerminus Is Not Sufficient to Form a Human Leukocyte Antigen-DM Receptive State of Major Histocompatibility Complex Class II (Journal Article) | SciTech Connect Disruption of Hydrogen Bonds between Major Histocompatibility Complex Class II and the Peptide NTerminus Is Not Sufficient to Form a Human Leukocyte Antigen-DM Receptive State of Major Histocompatibility Complex Class II Citation Details In-Document Search Title: Disruption of Hydrogen Bonds between Major

  7. Light-Weight, Low-Cost, Single-Phase, Liquid-Cooled Cold Plate (Presentation)

    SciTech Connect (OSTI)

    Narumanchi, S.

    2013-07-01

    This presentation, 'Light-Weight, Low-Cost, Single-Phase Liquid-Cooled Cold Plate,' directly addresses program goals of increased power density, specific power, and lower cost of power electronics components through improved thermal management.

  8. Assessment of cold-climate environmental research priorities. Appendixes A, B

    SciTech Connect (OSTI)

    States, J.B.

    1983-04-01

    These appendices present research plans in the areas of air pollution, water contamination/consumption, habitat modification and waste management that are relevant to the EPA's cold regions program. (ACR)

  9. Compact, Light-Weight, Single-Phase, Liquid-Cooled Cold Plate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Peer Evaluation PDF icon ape039narumanchi2011p.pdf More Documents & Publications Compact, Light-Weight, Single-Phase, Liquid-Cooled Cold Plate Advanced Liquid Cooling R&D

  10. Cooled electronic system with thermal spreaders coupling electronics cards to cold rails

    DOE Patents [OSTI]

    Chainer, Timothy J; Gaynes, Michael A; Graybill, David P; Iyengar, Madhusudan K; Kamath, Vinod; Kochuparambil, Bejoy J; Schmidt, Roger R; Schultz, Mark D; Simco, Daniel P; Steinke, Mark E

    2013-07-23

    Liquid-cooled electronic systems are provided which include an electronic assembly having an electronics card and a socket with a latch at one end. The latch facilitates securing of the card within the socket or removal of the card from the socket. A liquid-cooled cold rail is disposed at the one end of the socket, and a thermal spreader couples the electronics card to the cold rail. The thermal spreader includes first and second thermal transfer plates coupled to first and second surfaces on opposite sides of the card, and thermally conductive extensions extending from end edges of the plates, which couple the respective transfer plates to the liquid-cooled cold rail. The thermally conductive extensions are disposed to the sides of the latch, and the card is securable within or removable from the socket using the latch without removing the cold rail or the thermal spreader.

  11. T-549: Adobe ColdFusion 9.0.1 CHF1 and earlier

    Broader source: Energy.gov [DOE]

    Cross-site scripting (XSS) vulnerability in Adobe ColdFusion before 9.0.1 CHF1 allows remote attackers to inject arbitrary web script or HTML via vectors involving a "tag script.

  12. Application of evolved gas analysis to cold-cap reactions of melter feeds

    Office of Scientific and Technical Information (OSTI)

    for nuclear waste vitrification (Journal Article) | SciTech Connect Application of evolved gas analysis to cold-cap reactions of melter feeds for nuclear waste vitrification Citation Details In-Document Search Title: Application of evolved gas analysis to cold-cap reactions of melter feeds for nuclear waste vitrification In the vitrification of nuclear wastes, the melter feed (a mixture of nuclear waste and glass forming and modifying additives) experiences multiple gas-evolving reactions in

  13. Observation of quad-neutrons and gravity decay during cold fusion

    SciTech Connect (OSTI)

    Matsumoto, T. )

    1991-07-01

    The Nattoh model predicts that neutron nuclei such as quad-neutrons are produced during cold fusion as a result of the emission of a new particle, the iton. Several quad-neutron decays have been successfully recorded on nuclear emulsions. Especially important, micro-explosions caused by gravity decay have been clearly observed. This indicates that gravitational energy as well as fusion energy may be available in cold fusion.

  14. The 2007 Eastern US Spring Freeze: Increased Cold Damage in a Warming World

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect The 2007 Eastern US Spring Freeze: Increased Cold Damage in a Warming World Citation Details In-Document Search Title: The 2007 Eastern US Spring Freeze: Increased Cold Damage in a Warming World Plant ecologists have long been concerned with a seemingly paradoxical scenario in the relationship between plant growth and climate change: warming may actually increase the risk of plant frost damage. The underlying hypothesis is that mild winters and warm, early

  15. The temperature dependence of ultra-cold neutron wall losses in material

    Office of Scientific and Technical Information (OSTI)

    bottles coated with deuterated polystryene (Conference) | SciTech Connect The temperature dependence of ultra-cold neutron wall losses in material bottles coated with deuterated polystryene Citation Details In-Document Search Title: The temperature dependence of ultra-cold neutron wall losses in material bottles coated with deuterated polystryene × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and

  16. A light water excess heat reaction suggests that cold fusion may be alkali-hydrogen fusion

    SciTech Connect (OSTI)

    Bush, R.T. )

    1992-09-01

    This paper reports that Mills and Kneizys presented data in support of a light water excess heat reaction obtained with an electrolytic cell highly reminiscent of the Fleischmann-Pons cold fusion cell. The claim of Mills and Kneizys that their excess heat reaction can be explained on the basis of a novel chemistry, which supposedly also explains cold fusion, is rejected in favor of their reaction being, instead, a light water cold fusion reaction. It is the first known light water cold fusion reaction to exhibit excess heat, it may serve as a prototype to expand our understanding of cold fusion. From this new reactions are deduced, including those common to past cold fusion studies. This broader pattern of nuclear reactions is typically seen to involve a fusion of the nuclides of the alkali atoms with the simplest of the alkali-type nuclides, namely, protons, deuterons, and tritons. Thus, the term alkali-hydrogen fusion seems appropriate for this new type of reaction with three subclasses: alkali-hydrogen fusion, alkali-deuterium fusion, and alkali-tritium fusion. A new three-dimensional transmission resonance model (TRM) is sketched. Finally, preliminary experimental evidence in support of the hypothesis of a light water nuclear reaction and alkali-hydrogen fusion is reported. Evidence is presented that appears to strongly implicate the transmission resonance phenomenon of the new TRM.

  17. Mitofusin-2 protects against cold stress-induced cell injury in HEK293 cells

    SciTech Connect (OSTI)

    Zhang, Wenbin; Chen, Yaomin; Yang, Qun; Che, Honglei; Chen, Xiangjun; Yao, Ting; Zhao, Fang; Liu, Mingchao; Ke, Tao; Chen, Jingyuan; Luo, Wenjing

    2010-06-25

    Mitochondrial impairment is hypothesized to contribute to cell injury during cold stress. Mitochondria fission and fusion are closely related in the function of the mitochondria, but the precise mechanisms whereby these processes regulate cell injury during cold stress remain to be determined. HEK293 cells were cultured in a cold environment (4.0 {+-} 0.1 {sup o}C) for 2, 4, 8, or 12 h. Western blot analyses showed that these cells expressed decreased fission-related protein Drp1 and increased fusion-related protein Mfn2 at 4 h; meanwhile, electron microscopy analysis revealed large and long mitochondrial morphology within these cells, indicating increased mitochondrial fusion. With silencing of Mfn2 but not of Mfn1 by siRNA promoted cold-stress-induced cell death with decreased ATP production in HEK293 cells. Our results show that increased expression of Mfn2 and mitochondrial fusion are important for mitochondrial function as well as cell survival during cold stress. These findings have important implications for understanding the mechanisms of mitochondrial fusion and fission in cold-stress-induced cell injury.

  18. Effect of cold work and processing orientation on stress corrosion cracking behavior of alloy 600

    SciTech Connect (OSTI)

    Moshier, W.C.; Brown, C.M.

    2000-03-01

    Cold work accelerates stress corrosion cracking (SCC) growth rates in Alloy 600 (UNS N06600). However, the variation in crack growth rates generated from cold-worked material has been significant, and the effect has been difficult to quantify. A study was performed in hydrogenated water adjusted to pH 10.2 to evaluate systematically the effect of cold work on Alloy 600 as a function of temperature, amount of cold work, stress intensity factor, and processing orientation. Cold work was introduced into the material by tensile prestraining or cold-rolling plate product. Crack growth rates were determined between 252 C and 360 C, stress intensity factors between 21 MPa{radical}m and 55 MPa{radical}m, and yield strengths between 201 MPa and 827 MPa. The material with the highest yield strength was cold-rolled and tested in the longitudinal-transverse (LT) and short-transverse (ST) orientations. Crack growth rates increased with increasing temperature, stress intensity factor, and yield strength. Furthermore, crack growth rates were a strong function of the processing orientation in the cold-rolled plate, with growth rates approximately an order of magnitude greater in the ST orientation compared to the LT orientation. Crack growth rates in the LT orientation were measured between 0.003 x 10{sup {minus}9} m/s and 1.95 x 10{sup {minus}9} m/s and between 0.066 x 10{sup {minus}9} m/s and 6.3 x 10{sup {minus}9} m/s in the ST orientation. Activation energies were slightly greater in the ST orientation, ranging from 154 kcal/mol to 191 kcal/mol, compared to activation energies between 126 kJ/mol and 157 kJ/mol in the LT orientation. Results of this study demonstrated that, although cold work can be used to accelerate SCC, the orientation of crack growth significantly can affect the results and must be taken into account when analyzing data from cold-worked material.

  19. The rhetoric of science: A case study of the cold fusion controversy

    SciTech Connect (OSTI)

    Hatfield, D.L.

    1992-01-01

    This dissertation examines the circumstances surrounding and the rhetoric involved in the cold fusion controversy begun on March 23, 1989, when two University of Utah electrochemists, Martin Fleischmann and Stanley Pons, announced by press conference the discovery of room-temperature nuclear fusion. The dissertation seeks to determine to what extent a rhetorical analysis of cold fusion discourse may increase understanding of the controversy; the success of Fleischmann and Pons as scientific rhetors; the ways in which scientists' attitudes, values, and assumptions manifest themselves in the discourse; and finally, what may be learned about scientific discourse by examining the cold fusion controversy in particular. Examined were Fleischmann and Pon's initial publication announcing the cold fusion discovery in the Journal of Electroanalytical Chemistry; Steven E. Jones's initial publication of his cold fusion discovery and several representative discourse samples from the journal Nature; and Fleischmann and Pons's latest article in the Journal of Fusion Technology. Cold fusion discourse addressed evidential issues, questioning the existence of the cold fusion phenomenon. Several lines of argument were evoked to address this issue, including experimental competence, experimental replication, external consistency, communality, and disinterestedness. Also discovered is division between electrochemists and physicists over what constitutes valid evidence: electrochemists looked to excess heat production as proof of fusion; physicists looked to neutron production. The study concludes that Fleischmann and Pons followed an unsuccessful rhetorical strategy in their initial published paper. An alternative rhetorical strategy was available to Fleischmann and Pons, one in which they could have interpreted their evidence, thereby evoking a less confrontational response from the scientific community.

  20. Development of an objective questionnaire to assess perception, concern, and knowledge of, and attention and response to, the threat of nuclear war

    SciTech Connect (OSTI)

    Kulman, I.R.

    1985-01-01

    In addition to the subject objective, the relationship of specified personality variables (i.e., trait anxiety, locus of control, response tendency towards threat, and denial) to behavioral and psychological responses to the threat of nuclear war were assessed. The quantitative questionnaire, titled the Nuclear Reaction Scale, was composed of items selected from issues discussed in the psychological literature on the threat of nuclear war. These issues included: psychic numbing, cognitive reality, perceptions of likelihood and survival, nuclear illusions, and attention to the threat of nuclear war. A standardization sample of 360 college students was administered the Nuclear Reaction Scale, Trait Anxiety Scale, Internal-External Locus of Control Scale, Facilitation-Inhibition Scale, and Haan Denial Scale. Three additional subsamples, identified as Military, Nuclear Freeze, and Church, were given the Nuclear Reaction Scale to assess the validity of the scale. A factor analysis of the Nuclear Reaction Scale indicated a nine-factor solution that described issues such as concern perceptions, likelihood, survivability, and control over the threat of nuclear war. A number of strong relationships existed between computed factors on the Nuclear Reaction Scale. Demographic comparisons found significant differences related to sex and political affiliation.

  1. Genome mappers have a hot time at Cold Spring Harbor

    SciTech Connect (OSTI)

    Nowak, R.

    1995-05-26

    This is a report on the Genome Mapping and Sequencing meeting from 10-14 May 1995. Debate included how to start the final stage of the Human Genome Project (HGP) - large scale sequencing and the problem of funding. Major accomplishments of the HGP are summarized briefly including: maps of at least two chromosomes, 16 and 19, are in the final difficult stage and will be the first to be completely sequenced; evidence is being refined on the myotonic dystrophy gen; and an attempt to fashion a silicon chip to detect specific DNA sequences.

  2. About Us | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Us About Us The U.S. Department of Energy (DOE or Department) is committed to managing its responsibilities associated with the legacy of World War II and the Cold War. This legacy includes radioactive and chemical waste, environmental contamination, and hazardous material at over 100 sites across the country. The Department has taken major steps toward fulfilling our commitments to clean up this environmental legacy by successfully implementing an accelerated environmental remediation program.

  3. Major Risk Factors to the Integrated Facility Disposition Project |

    Energy Savers [EERE]

    Department of Energy to the Integrated Facility Disposition Project Major Risk Factors to the Integrated Facility Disposition Project The scope of the Integrated Facility Disposition Project (IFDP) needs to comprehensively address a wide range of environmental management risks at the Oak Ridge Reservation (ORO). PDF icon Major Risk Factors to the Integrated Facility Disposition Project More Documents & Publications Major Risk Factors Integrated Facility Disposition Project - Oak Ridge

  4. TOMORROW: Secretaries Chu and Salazar to Make Major Renewable Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Announcement | Department of Energy Secretaries Chu and Salazar to Make Major Renewable Energy Announcement TOMORROW: Secretaries Chu and Salazar to Make Major Renewable Energy Announcement December 15, 2010 - 12:00am Addthis WASHINGTON, DC --- Secretary of Energy Steven Chu and Secretary of the Interior Ken Salazar will hold a news media teleconference tomorrow, Thursday, December 16, 2010 to make a major announcement regarding renewable energy development on public lands in the West.

  5. Fuel Cell Technologies Office Reaches Major Patent Milestone | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Fuel Cell Technologies Office Reaches Major Patent Milestone Fuel Cell Technologies Office Reaches Major Patent Milestone January 9, 2015 - 10:01am Addthis Fuel Cell Technologies Office Reaches Major Patent Milestone Sunita Satyapal Director, Fuel Cell Technologies Office Fuel cells are an emerging technology that can provide heat and electricity to buildings and power for vehicles while emitting nothing but water. To bring more high-impact fuel cell innovations to the marketplace,

  6. Thirteen Major Companies Join Energy Department's Workplace Charging

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Challenge | Department of Energy Major Companies Join Energy Department's Workplace Charging Challenge Thirteen Major Companies Join Energy Department's Workplace Charging Challenge January 31, 2013 - 11:38am Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON -- Energy Secretary Steven Chu announced 13 major U.S. employers and eight stakeholder groups have joined the new Workplace Charging Challenge to help expand access to workplace charging stations for American workers across the

  7. Environmental Effects Abroad of Major Federal Actions (CEQ, 1979) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Environmental Effects Abroad of Major Federal Actions (CEQ, 1979) Environmental Effects Abroad of Major Federal Actions (CEQ, 1979) On January 4, 1979, President Carter signed Executive Order 12114, entitled Environmental Effects of Major Federal Actions. The purpose of this Council on Environmental Quality memorandum is to initiate the consultation process required by this Executive Order. PDF icon 44 Fed Reg 18633: Council on Environmental Quality: Environmental

  8. DOE Announces Major Expansion of Crowdsourcing Initiative for Building

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies | Department of Energy Announces Major Expansion of Crowdsourcing Initiative for Building Technologies DOE Announces Major Expansion of Crowdsourcing Initiative for Building Technologies April 12, 2016 - 1:30pm Addthis Join our online community to learn about industry challenges, share ideas, and discuss solutions. Join our online community to learn about industry challenges, share ideas, and discuss solutions. The U.S. Department of Energy today announced a major expansion of

  9. Radioactive Waste Issues in Major Nuclear Incidents | Department of Energy

    Energy Savers [EERE]

    Radioactive Waste Issues in Major Nuclear Incidents Radioactive Waste Issues in Major Nuclear Incidents S.Y. Chen*, Illinois Institute of Technology Abstract: Large amounts of radioactive waste had been generated in major nuclear accidents such as the Chernobyl nuclear accident in Ukraine of 1986 and the recent Fukushima nuclear accident in Japan of 2011. The wastes were generated due to the accidental releases of radioactive materials that resulted in widespread contamination throughout the

  10. List of Major Information Systems,National Nuclear Security Administration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ADaPT Networked: | Department of Energy List of Major Information Systems,National Nuclear Security Administration ADaPT Networked: List of Major Information Systems,National Nuclear Security Administration ADaPT Networked: List of Major Information Systems, Defense Line of Business National Nuclear Security Administration ADaPT Networked: Develops and deploys emerging information networking technology to production processes in support of the U.S. nuclear weapons stockpile. National Nuclear

  11. Salazar, Chu Announce Major Offshore Wind Initiatives | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Major Offshore Wind Initiatives Salazar, Chu Announce Major Offshore Wind Initiatives February 7, 2011 - 12:00am Addthis NORFOLK, VA - Unveiling a coordinated strategic plan to accelerate the development of offshore wind energy, Secretary of the Interior Ken Salazar and Secretary of Energy Steven Chu today announced major steps forward in support of offshore wind energy in the United States, including new funding opportunities for up to $50.5 million for projects that support offshore

  12. Financial News for Major Energy Companies, Fourth Quarter 2005

    Gasoline and Diesel Fuel Update (EIA)

    Fourth Quarter 2005 Overview The "Financial News for Major Energy Companies" is issued quarterly to report recent trends in the financial performance of the major energy companies. These include the respondents to Form EIA-28 (Financial Reporting System (FRS)), with the exception of the FRS companies that do not issue quarterly earnings releases or fail to provide separate information for the company's U.S. operations. Twenty-one major energy companies 1 reported overall net income

  13. Financial News for Major Energy Companies, October - December 2004

    Gasoline and Diesel Fuel Update (EIA)

    The "Financial News for Major Energy Companies" is issued quarterly to report recent trends in the financial performance of the major energy companies. These include the respondents to Form EIA-28 (Financial Reporting System (FRS)), with the exception of the FRS companies that do not issue quarterly earnings releases or fail to provide separate information for the company's U.S. operations. Twenty-three major energy companies reported overall net income (excluding unusual items) of

  14. Chu, Salazar to Announce Major Offshore Wind Energy Initiatives |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Chu, Salazar to Announce Major Offshore Wind Energy Initiatives Chu, Salazar to Announce Major Offshore Wind Energy Initiatives February 4, 2011 - 12:00am Addthis NORFOLK,VA - On Monday, February 7, 2011 Energy Secretary Steven Chu and Secretary of the Interior Ken Salazar will announce major new initiatives to accelerate the responsible siting and development of offshore wind energy projects. WHAT: Offshore Wind Energy News Conference WHEN: Monday, February 7, 11:00 AM

  15. Energy Department Announces Major Milestones for Decatur, Ill. Clean Coal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project | Department of Energy Major Milestones for Decatur, Ill. Clean Coal Project Energy Department Announces Major Milestones for Decatur, Ill. Clean Coal Project September 19, 2012 - 1:00pm Addthis Washington, DC - Today, the U.S. Energy Department marked two important milestones in the Illinois Industrial Carbon Capture and Storage (ICCS) project in Decatur, Illinois, a major clean coal project and the Department's first large-scale industrial carbon capture and storage demonstration

  16. Energy Intensity Indicators: Indicators for Major Sectors | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy for Major Sectors Energy Intensity Indicators: Indicators for Major Sectors This system of energy intensity indicators for total energy covers the economy as a whole and each of the major end-use sectors - transportation, industry, commercial, and residential, as well as the electric power sector. These sectors are shown in Figure 1. Please go to the menu below the figure to see a more detailed discussion of historical trends in the energy intensity indicator for a particular sector.

  17. Obama Administration Takes Major Step toward Advanced Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Obama Administration Takes Major Step toward Advanced Vehicles with New Fleet Management ... In conjunction with the Memorandum, the General Services Administration (GSA) today ...

  18. Obama Administration Officials to Announce Major Steps toward...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Major Steps toward Federal Advanced Vehicle Fleet Obama Administration Officials to ... Martha Johnson, Administrator, U.S. General Services Administration Nancy Sutley, Chair, ...

  19. Major Effects in the Thermodynamics of Detonation Products: Phase...

    Office of Scientific and Technical Information (OSTI)

    Water (Hsub 2O) and nitrogen (Nsub 2) are major detonation products of high explosives ... enough temperatures and pressures to influence detonation properties of common explosives. ...

  20. Genealogy of Major U.S. Oil and Gas Producers

    Reports and Publications (EIA)

    2007-01-01

    Summarizes the mergers and acquisitions of the U.S. major oil companies that have occurred, in some cases, over approximately the last 20 years.

  1. Environmental Effects Abroad of Major Federal Actions | Department...

    Broader source: Energy.gov (indexed) [DOE]

    4, 1979, President Carter signed Executive Order 12114, entitled Environmental Effects of Major Federal Actions. The purpose of this Council on Environmental Quality memorandum is...

  2. Recovery Act Investment Wraps Up, Delivering Major Benefits to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Delivering Major Benefits to the Nation October 5, 2015 - 3:21pm Addthis Patricia A. Hoffman Patricia A. Hoffman Assistant Secretary, Office of Electricity Delivery & Energy...

  3. Dating of major normal fault systems using thermochronology-...

    Open Energy Info (EERE)

    Dating of major normal fault systems using thermochronology- An example from the Raft River detachment, Basin and Range, western United States Jump to: navigation, search OpenEI...

  4. Financial News for Major Energy Companies, July - September 2004

    Gasoline and Diesel Fuel Update (EIA)

    ... the three companies that reported decreased earnings relative to Q303. Chemical Operations * Higher margins and sales volumes boosted earnings of the majors' chemical operations. ...

  5. Financial News for Major Energy Companies, January - March 2004

    Gasoline and Diesel Fuel Update (EIA)

    ... Chemical Operations Earnings of the majors' chemical operations increased substantially relative to a year ago, mostly due to higher margins and reduced operating costs. The ...

  6. Financial News for Major Energy Companies, July - September 2003

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Chemical Operations Earnings of the majors' chemical operations decrease in total, as company results were consistently lower than a year ago, mostly due to higher feedstock ...

  7. Financial News for Major Energy Producers, Third Quarter 2010

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... worldwide gas and power, and worldwide chemical operations) generated higher earnings in ... Worldwide chemical operations generated 46 percent higher earnings for the majors in Q310 ...

  8. DOE Announces Major Expansion of Crowdsourcing Initiative for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The U.S. Department of Energy today announced a major expansion of its distinctive online crowdsourcing community for building technologies. Seeking to draw on the creativity and ...

  9. Unified Procedures Applicable to Major Federal Actions Relating...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Subject to Executive Order 12114 (State Department, 1979) Unified Procedures Applicable to Major Federal Actions Relating to Nuclear Activities Subject to Executive Order 12114 ...

  10. Major Projects with Quick Starts & Jobs Creation Office of Clean...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Major Projects with Quick Starts & Jobs Creation Office of Clean Coal Summary of Projects ... Carbon dioxide capture and storage (CCS) is a technology that is indispensable in ...

  11. Nonproliferation Uncertainties, a Major Barrier to Used Nuclear...

    Office of Scientific and Technical Information (OSTI)

    Barrier to Used Nuclear Fuel Recycle in the United States Citation Details In-Document Search Title: Nonproliferation Uncertainties, a Major Barrier to Used Nuclear Fuel Recycle in ...

  12. AUDIT REPORT Cybersecurity Controls Over a Major National Nuclear...

    Broader source: Energy.gov (indexed) [DOE]

    FROM: Gregory H. Friedman Inspector General SUBJECT: INFORMATION: Audit Report: "Cybersecurity Controls Over a Major National Nuclear Security Administration Information System"...

  13. Major Facility Siting Program - Circular 2 | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Major Facility Siting Program - Circular 2PermittingRegulatory...

  14. Energy Department Awards First Major Task Order Under Streamlined...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department Awards First Major Task Order Under Streamlined Contracting System October 17, 2005 - 11:59am Addthis New Mexico Firm Contracted for Ashtabula Clean-up ...

  15. Major Process Revision of WP&C - Lessons Learned | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Hazard AnalysisControl Subject Matter Expert Involvement Expectations for Workers Lessons Learned Major Process Revision of WP&C - Lessons Learned More Documents &...

  16. Achievements by The Department of Energy's Other Major Laboratories...

    Office of Scientific and Technical Information (OSTI)

    Major Labs and Facilities Top Savannah River Ecology Laboratory (SREL) Overview of SREL SREL Research Snapshots Savannah River Ecology Laboratory Annual Technical Progress Report ...

  17. History by The Department of Energy's Other Major Laboratories...

    Office of Scientific and Technical Information (OSTI)

    Listing of Major Labs and Facilities Top Savannah River Ecology Laboratory (SREL) Institute of Ecology-Associated Facilities The National Environmental Research Park at ...

  18. SOC-Los Alamos and major subcontractors support northern New...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alamos and major subcontractors support northern New Mexico Currently offered Industry Cluster Development Grants are latest funding initiative October 1, 2014 SOC-Los Alamos' Jack...

  19. EM News Flashes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of workers who produced plutonium for the Manhattan Project, World War II, and Cold War. September 4, 2014 EM Acquisition and Project Management Deputy Assistant Secretary...

  20. Legacy Management Sites | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to managing its responsibilities associated with the environmental legacy of World War II and the Cold War. This legacy includes radioactive and chemical waste, environmental...

  1. Critical factors in transitioning from fuel cell to cold fusion technology

    SciTech Connect (OSTI)

    Mcgraw, T.F.; Davis, R.R.

    1998-07-01

    The fuel cell industry possesses much of the required manufacturing equipment and knowledge-base (e.g., proton conduction and hydrogen safety) necessary to develop cold fusion systems. Key factors in making a transition to cold fusion technology are discussed. Loading of reaction material can be provided by electrolytic charging and high gas over-pressure. Effective pressures over 10,000 atmospheres are required in cold fusion systems, giving a loading of H/M = 1; and a combination of loading methods is highly desirable. Systems must be designed to provide continuous flow of hydrogen ions ({much{underscore}gt}10{sup 17}/sec for ten kilowatts), with an input power source of 50 watts (est.). Cold fusion experiments have shown that helium is formed during the reaction, and physical changes occur in the reaction material. These revelations impact design and operation of cold fusion systems, as the reaction material must be replaced periodically, while the systems must maintain integrity during operation. Safety and cost are also highly important considerations.

  2. Design and first cold test of BNL superconducting 112 MHz QWR for electron gun applications

    SciTech Connect (OSTI)

    Belomestnykh, S.; Ben-Zvi, I.; Boulware, C.H.; Chang, X.; Grimm, T.L.; Siegel, B.; Than, R.; Winowski, M.

    2011-03-28

    Brookhaven National Laboratory and Niowave, Inc. have designed, fabricated, and performed the first cold test of a superconducting 112 MHz quarter-wave resonator (QWR) for electron gun experiments. The first cold test of the QWR cryomodule has been completed at Niowave. The paper discusses the cryomodule design, presents the cold test results, and outline plans to upgrade the cryomodule for future experiments. A quarter-wave resonator concept of superconducting RF (SRF) electron gun was proposed at BNL for electron cooling ion/proton beams at RHIC. QWRs can be made sufficiently compact even at low RF frequencies (long wavelengths). The long wavelength allows to produce long electron bunches, thus minimizing space charge effects and enabling high bunch charge. Also, such guns should be suitable for experiments requiring high average current electron beams. A 112 MHz QWR gun was designed, fabricated, and cold-tested in collaboration between BNL and Niowave. This is the lowest frequency SRF gun ever tested successfully. In this paper we describe the gun design and fabrication, present the cold test results, and outline plans for the cryomodule upgrade for future experiments.

  3. SNS 2.1K Cold Box Turn-down Studies

    SciTech Connect (OSTI)

    F. Casagrande; P.A. Gurd; D.R. Hatfield; M.P. Howell; W.H. Strong; D. Arenius; J. Creel; V. Ganni; P. Knudsen

    2006-06-26

    The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory is nearing completion. The cold section of the Linac consists of 81 superconducting radio frequency cavities cooled to 2.1K by a 2400 watt cryogenic refrigeration system. The 2.1K cold box consists of four stages of centrifugal compressors with LN2-cooled variable speed electric motors and magnetic bearings. The cryogenic system successfully supported the Linac beam commissioning at both 4.2K and 2.1K and has been fully operational since June 2005. This paper describes the control principles utilized and the experimental results obtained for the SNS cold compressors turn-down capability to about 30% of the design flow, and possible limitation of the frequency dependent power factor of the cold compressor electric motors, which was measured for the first time during commissioning. These results helped to support the operation of the Linac over a very broad and stable cold compressor operating flow range (refrigeration capacity) and pressure. This in turn helped to optimize the cryogenic system operating parameters, minimizing the utilities and improving the system reliability and availability.

  4. SANS study of understanding mechanism of cold gelation of globular proteins

    SciTech Connect (OSTI)

    Chinchalikar, A. J., E-mail: akshayc@barc.gov.in; Kumar, Sugam, E-mail: akshayc@barc.gov.in; Aswal, V. K., E-mail: akshayc@barc.gov.in; Wagh, A. G. [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Kohlbrecher, J. [Laboratory of Neutron Scattering, Paul Scherrer Institut, CH - 5232 PSI Villigen (Switzerland)

    2014-04-24

    Small-angle neutron scattering (SANS) has been used to probe the evolution of interaction and the resultant structures in the cold gelation of globular proteins. The cold gelation involves two steps consisting of irreversible protein deformation by heating followed by some means (e.g. increasing ionic strength) to bring them together at room temperature. We have examined the role of different salts in cold gelation of preheated aqueous Bovine Serum Albumin (BSA) protein solutions. The interactions have been modeled by two Yukawa potential combining short-range attraction and long-range repulsion. We show that in step 1 (preheated temperature effect) the deformation of protein increases the magnitude of attractive interaction but not sufficient to induce gel. The attractive interaction is further enhanced in step 2 (salt effect) to result in gel formation. The salt effect is found to be strongly depending on the valency of the counterions. The gel structure has been characterized by the mass fractals.

  5. Spent nuclear fuel project cold vacuum drying facility vacuum and purge system design description

    SciTech Connect (OSTI)

    IRWIN, J.J.

    1998-11-30

    This document provides the System Design Description (SDD) for the Cold Vacuum Drying Facility (CVDF) Vacuum and Purge System (VPS) . The SDD was developed in conjunction with HNF-SD-SNF-SAR-O02, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998), The HNF-SD-SNF-DRD-002, 1998, Cold Vacuum Drying Facility Design Requirements, and the CVDF Design Summary Report. The SDD contains general descriptions of the VPS equipment, the system functions, requirements and interfaces. The SDD provides references for design and fabrication details, operation sequences and maintenance. This SDD has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

  6. Cold Climate and Retrofit Applications for Air-to-Air Heat Pumps

    SciTech Connect (OSTI)

    Baxter, Van D

    2015-01-01

    Air source heat pumps (ASHP) including air-to-air ASHPs are easily applied to buildings almost anywhere for new construction as well as retrofits or renovations. They are widespread in milder climate regions but their use in cold regions is hampered due to low heating efficiency and capacity at cold outdoor temperatures. Retrofitting air-to-air ASHPs to existing buildings is relatively easy if the building already has an air distribution system. For buildings without such systems alternative approaches are necessary. Examples are ductless, minisplit heat pumps or central heat pumps coupled to small diameter, high velocity (SDHV) air distribution systems. This article presents two subjects: 1) a summary of R&D investigations aimed at improving the cold weather performance of ASHPs, and 2) a brief discussion of building retrofit options using air-to-air ASHP systems.

  7. Singlet particles as cold dark matter in a noncommutative space-time

    SciTech Connect (OSTI)

    Ettefaghi, M. M.

    2009-03-15

    We extend the noncommutative (NC) standard model to incorporate singlet particles as cold dark matter. In the NC space-time, the singlet particles can be coupled to the U(1) gauge field in the adjoint representation. We study the relic density of the singlet particles due to the NC induced interaction. Demanding either the singlet fermion or the singlet scalar to serve as cold dark matter and the NC induced interactions to be relevant to the dark matter production, we obtain the corresponding relations between the NC scale and the dark matter masses, which are consistent with some existing bounds.

  8. Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping

    Energy Savers [EERE]

    and Feasibility | Department of Energy Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility This Sandia National Laboratories study examines the feasibility of a hydrogen-fueled PEM fuel cell barge to provide electrical power to vessels at anchorage or at berth. The study includes both a determination of the technical feasibility of the idea as well as an analysis of

  9. Waste Tank Size Determination for the Hanford River Protection Project Cold Test, Training, and Mockup Facility

    SciTech Connect (OSTI)

    Onishi, Yasuo; Wells, Beric E.; Kuhn, William L.

    2001-03-30

    The objective of the study was to determine the minimum tank size for the Cold Test Facility process testing of Hanford tank waste. This facility would support retrieval of waste in 75-ft-diameter DSTs with mixer pumps and SSTs with fluidic mixers. The cold test model will use full-scale mixer pumps, transfer pumps, and equipment with simulated waste. The study evaluated the acceptability of data for a range of tank diameters and depths and included identifying how the test data would be extrapolated to predict results for a full-size tank.

  10. Probing novel scalar and tensor interactions from (ultra)cold neutrons to

    Office of Scientific and Technical Information (OSTI)

    the LHC (Journal Article) | SciTech Connect Journal Article: Probing novel scalar and tensor interactions from (ultra)cold neutrons to the LHC Citation Details In-Document Search Title: Probing novel scalar and tensor interactions from (ultra)cold neutrons to the LHC Authors: Bhattacharya, Tanmoy ; Cirigliano, Vincenzo ; Cohen, Saul D. ; Filipuzzi, Alberto ; González-Alonso, Martín ; Graesser, Michael L. ; Gupta, Rajan ; Lin, Huey-Wen Publication Date: 2012-03-30 OSTI Identifier: 1098630

  11. DEVELOPMENT OF COLD CLIMATE HEAT PUMP USING TWO-STAGE COMPRESSION

    SciTech Connect (OSTI)

    Shen, Bo; Rice, C Keith; Abdelaziz, Omar; Shrestha, Som S

    2015-01-01

    This paper uses a well-regarded, hardware based heat pump system model to investigate a two-stage economizing cycle for cold climate heat pump applications. The two-stage compression cycle has two variable-speed compressors. The high stage compressor was modelled using a compressor map, and the low stage compressor was experimentally studied using calorimeter testing. A single-stage heat pump system was modelled as the baseline. The system performance predictions are compared between the two-stage and single-stage systems. Special considerations for designing a cold climate heat pump are addressed at both the system and component levels.

  12. Possibility of phase transitions inducing cold fusion in palladium/deuterium systems

    SciTech Connect (OSTI)

    Zhang, W.X. )

    1992-01-01

    In this paper a tentative theory is presented in which {beta}-phase PdD{sub x} containing supersaturated deuterium transits into {beta}-phase PdD{sub x} containing less deuterium and {alpha}-phase PdD{sub x}. High-pressure ({approx}10 GPa) deuterium bubbles form at the same time. As the bubbles release energy, cracks are created in the PdD{sub x} crystal, and charge separation of deuterium occurs. Thus would cold fusion be induced. This proposal supports the fracture mechanism for cold fusion.

  13. Stationary self-focusing of intense laser beam in cold quantum plasma using ramp density profile

    SciTech Connect (OSTI)

    Habibi, M.; Ghamari, F.

    2012-10-15

    By using a transient density profile, we have demonstrated stationary self-focusing of an electromagnetic Gaussian beam in cold quantum plasma. The paper is devoted to the prospects of using upward increasing ramp density profile of an inhomogeneous nonlinear medium with quantum effects in self-focusing mechanism of high intense laser beam. We have found that the upward ramp density profile in addition to quantum effects causes much higher oscillation and better focusing of laser beam in cold quantum plasma in comparison to that in the classical relativistic case. Our computational results reveal the importance and influence of formation of electron density profiles in enhancing laser self-focusing.

  14. Method and apparatus for regenerating cold traps within liquid-metal systems

    DOE Patents [OSTI]

    McKee, Jr., John M.

    1976-01-01

    Oxide and hydride impurities of a liquid metal such as sodium are removed from a cold trap by heating to a temperature at which the metal hydroxide is stable in a molten state. The partial pressure of hydrogen within the system is measured to determine if excess hydride or oxide is present. Excess hydride is removed by venting hydrogen gas while excess oxide can be converted to molten hydroxide through the addition of hydrogen. The resulting, molten hydroxide is drained from the trap which is then returned to service at cold trap temperatures within the liquid-metal system.

  15. Financing Vogtle: A Major Achievement for the Loan Programs Office |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Vogtle: A Major Achievement for the Loan Programs Office Financing Vogtle: A Major Achievement for the Loan Programs Office June 24, 2015 - 12:01pm Addthis Financing Vogtle: A Major Achievement for the Loan Programs Office Peter W. Davidson Peter W. Davidson Former Executive Director of the Loan Programs Office (LPO) What does this project do? The Vogtle project is the first new nuclear power plant to be licensed and begin construction in the U.S. in more than three

  16. Genealogy of major U.S. refiners - Energy Information Administration

    U.S. Energy Information Administration (EIA) Indexed Site

    See full Genealogy of Major U.S. Refiners Previous Release Genealogy of Major U.S. Refiners Genealogy of Major U.S. Refiners Release date: September 18, 2013 figre 1. World energy consumption, 1990-2040. The structure of the U.S. petroleum refining industry has changed substantially over the past several years. In the diagram the companies shown on the right side are presently active in U.S. refining. The transactions over the past 25 years that created these companies also are shown. The

  17. Financial News for Major Energy Companies, October - December 2001

    Gasoline and Diesel Fuel Update (EIA)

    Financial News for Major Energy Companies Twenty-two major energy companies reported overall net income (excluding unusual items) of $4.6 billion during the fourth quarter of 2001 (Q401). The level of net income represented a 65-percent decline relative to the fourth quarter of 2000 (Q400) (Table 1). The majors' foreign upstream oil and natural gas production operations made the largest contribution to overall net income in Q401 at $2.0 billion (Table 1), with domestic upstream oil and natural

  18. Secretary Chu and Senator Reid to Make Major Energy Announcement...

    Broader source: Energy.gov (indexed) [DOE]

    D.C. - U.S. Secretary Steven Chu and U.S. Senator Harry Reid will host a press conference call today, Tuesday, February 15 at 4:00 pm EST to make a major funding announcement...

  19. Nevada Strengthens Electric Vehicle Infrastructure on Major U...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Infrastructure on Major U.S. Highway December 15, 2015 - 3:55pm Addthis Paul Thomsen, Director of the Nevada Governors Office of Energy, announces the new...

  20. Other Major Litigation of Direct Interest to DOE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    December 4, 2008 Other Major Litigation of Direct Interest to DOE Entergy Corporation v. EPA; PSEG Fossil LLC v. Riverkeeper, Inc.; Utility Water Group v. Riverkeeper, Inc., S. Ct. ...