Powered by Deep Web Technologies
Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

SUPERCONDUCTING MAGNETIC ENERGY STORAGE  

E-Print Network (OSTI)

Scale Superconducting Magnetic Energy Storage Plant", IEEEfor SlIperconducting Magnetic Energy Storage Unit", inSuperconducting Magnetic Energy Storage Plant, Advances in

Hassenzahl, W.

2011-01-01T23:59:59.000Z

2

SUPERCONDUCTING MAGNETIC ENERGY STORAGE  

E-Print Network (OSTI)

Superconducting 30-MJ Energy Storage Coil", Proc. 19 80 ASC,Superconducting Magnetic Energy Storage Plant", IEEE Trans.SlIperconducting Magnetic Energy Storage Unit", in Advances

Hassenzahl, W.

2011-01-01T23:59:59.000Z

3

Superconducting magnetic energy storage  

DOE Green Energy (OSTI)

Long-time varying-daily, weekly, and seasonal-power demands require the electric utility industry to have installed generating capacity in excess of the average load. Energy storage can reduce the requirement for less efficient excess generating capacity used to meet peak load demands. Short-time fluctuations in electric power can occur as negatively damped oscillations in complex power systems with generators connected by long transmission lines. Superconducting inductors with their associated converter systems are under development for both load leveling and transmission line stabilization in electric utility systems. Superconducting magnetic energy storage (SMES) is based upon the phenomenon of the nearly lossless behavior of superconductors. Application is, in principal, efficient since the electromagnetic energy can be transferred to and from the storage coils without any intermediate conversion to other energy forms. Results from a reference design for a 10-GWh SMES unit for load leveling are presented. The conceptual engineering design of a 30-MJ, 10-MW energy storage coil is discussed with regard to system stabilization, and tests of a small scale, 100-KJ SMES system are presented. Some results of experiments are provided from a related technology based program which uses superconducting inductive energy storage to drive fusion plasmas.

Rogers, J.D.; Boenig, H.J.; Hassenzahl, W.V.; Schermer, R.I.

1978-01-01T23:59:59.000Z

4

Superconducting magnetic energy storage  

DOE Green Energy (OSTI)

Fusion power production requires energy storage and transfer on short time scales to create confining magnetic fields and for heating plasmas. The theta-pinch Scyllac Fusion Test Reactor (SFTR) requires 480 MJ of energy to drive the 5-T compression field with a 0.7-ms rise time. Tokamak Experimental Power Reactors (EPR) require 1 to 2 GJ of energy with a 1 to 2-s rise time for plasma ohmic heating. The design, development, and testing of four 300-kJ energy storage coils to satisfy the SFTR needs are described. Potential rotating machinery and homopolar energy systems for both the Reference Theta-Pinch Reactor (RTPR) and tokamak ohmic-heating are presented.

Rogers, J.D.

1976-01-01T23:59:59.000Z

5

Superconducting magnetic energy storage  

SciTech Connect

Recent programmatic developments in Superconducting Magnetic Energy Storage (SMES) have prompted renewed and widespread interest in this field. In mid 1987 the Defense Nuclear Agency, acting for the Strategic Defense Initiative Office, issued a request for proposals for the design and construction of SMES Engineering Test Model (ETM). Two teams, one led by Bechtel and the other by Ebasco, are now engaged in the first phase of the development of a 10 to 20 MWhr ETM. This report presents the rationale for energy storage on utility systems, describes the general technology of SMES, and explains the chronological development of the technology. The present ETM program is outlined; details of the two projects for ETM development are described in other papers in these proceedings. The impact of high T/sub c/ materials on SMES is discussed. 69 refs., 3 figs., 3 tabs.

Hassenzahl, W.

1988-08-01T23:59:59.000Z

6

SUPERCONDUCTING MAGNETIC ENERGY STORAGE  

E-Print Network (OSTI)

pumped hydro, compressed air, and battery energy storage areto other energy storage sys tem s suc h as pumped hydro andenergy would be $50/MJ whereas the cost of the pumped hydro

Hassenzahl, W.

2011-01-01T23:59:59.000Z

7

Magnetic energy storage  

DOE Green Energy (OSTI)

The fusion program embraces low loss superconductor strand development with integration into cables capable of carrying 50 kA in pulsed mode at high fields. This evolvement has been paralleled with pulsed energy storage coil development and testing from tens of kJ at low fields to a 20 MJ prototype tokamak induction coil at 7.5 T. Energy transfer times have ranged from 0.7 ms to several seconds. Electric utility magnetic storage for prospective application is for diurnal load leveling with massive systems to store 10 GWh at 1.8 K in a dewar structure supported on bedrock underground. An immediate utility application is a 30 MJ system to be used to damp power oscillations on the Bonneville Power Administration electric transmission lines. An off-shoot of this last work is a new program for electric utility VAR control with the potential for use to suppress subsynchronous resonance. This paper presents work in progress, work planned, and recently completed unusual work.

Rogers, J.D.

1980-01-01T23:59:59.000Z

8

Superconducting magnetic energy storage  

SciTech Connect

The U.S. electric utility industry transmits power to customers at a rate equivalent to only 60% of generating capacity because, on an annual basis, the demand for power is not constant. Load leveling and peak shaving units of various types are being used to increase the utilization of the base load nuclear and fossil power plants. The Los Alamos Scientific Laboratory (LASL) is developing superconducting magnetic energy storage (SMES) systems which will store and deliver electrical energy for the purpose of load leveling, peak shaving, and the stabilization of electric utility networks. This technology may prove to be an effective means of storing energy for the electric utilities because (1) it has a high efficiency (approximately 90%), (2) it may improve system stability through the fast response of the converter, and (3) there should be fewer siting restrictions than for other load leveling systems. A general SMES system and a reference design for a 10-GWh unit for load leveling are described; and the results of some recent converter tests are presented.

Hassenzahl, W.V.; Boenig, H.J.

1977-01-01T23:59:59.000Z

9

SUPERCONDUCTING MAGNETIC ENERGY STORAGE  

E-Print Network (OSTI)

Adki ns, "Raccoon Mountain Pumped-Storage Plant- Ten Years2J O. D. Johnson, "Worldwide Pumped-Storage Projects", PowerUnderground Pumped Hydro Storage", Proc. 1976 Eng.

Hassenzahl, W.

2011-01-01T23:59:59.000Z

10

Compact magnetic energy storage module  

DOE Patents (OSTI)

A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module. 4 figures.

Prueitt, M.L.

1994-12-20T23:59:59.000Z

11

Compact magnetic energy storage module  

DOE Patents (OSTI)

A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module.

Prueitt, Melvin L. (Los Alamos, NM)

1994-01-01T23:59:59.000Z

12

Reassessment of Superconducting Magnetic Energy Storage (SMES) Transmission System Benefits  

Science Conference Proceedings (OSTI)

This report reassesses the benefits of superconducting magnetic energy storage (SMES) for enhancing transmission system performance.

2002-03-21T23:59:59.000Z

13

Magnetic Energy Storage System: Superconducting Magnet Energy Storage System with Direct Power Electronics Interface  

Science Conference Proceedings (OSTI)

GRIDS Project: ABB is developing an advanced energy storage system using superconducting magnets that could store significantly more energy than today’s best magnetic storage technologies at a fraction of the cost. This system could provide enough storage capacity to encourage more widespread use of renewable power like wind and solar. Superconducting magnetic energy storage systems have been in development for almost 3 decades; however, past devices were designed to supply power only for short durations—generally less than a few minutes. ABB’s system would deliver the stored energy at very low cost, making it ideal for eventual use in the electricity grid as a costeffective competitor to batteries and other energy storage technologies. The device could potentially cost even less, on a per kilowatt basis, than traditional lead-acid batteries.

None

2010-10-01T23:59:59.000Z

14

PURPA and Superconducting Magnetic Energy Storage: Energy Conservation, Environmental Protection and Entrepreneurial Opportunity in the Next Technological Revolution  

E-Print Network (OSTI)

1988] SUPERCONDUCTING MAGNETIC ENERGY STORAGE Corp. ,60 theSupercon- ducting Magnetic Energy Storage, 2 SUPERCURRENTS1988] SUPERCONDUCTING MAGNETIC ENERGY STORAGE facilities (

Bovett, Robert E.

1988-01-01T23:59:59.000Z

15

Toroidal constant-tension superconducting magnetic energy storage units  

DOE Patents (OSTI)

A superconducting magnetic energy storage unit is provided in which the magnet is wound in a toroidal fashion such that the magnetic field produced is contained only within the bore of the magnet, and thus producing a very low external field. The superconducting magnet includes a coolant channel disposed through the wire. The bore of the magnet comprises a storage volume in which cryogenic coolant is stored, and this volume supplies the coolant to be delivered to the coolant in the magnet.

Herring, J.S.

1990-10-26T23:59:59.000Z

16

Toroidal constant-tension superconducting magnetic energy storage units  

DOE Patents (OSTI)

A superconducting magnetic energy storage unit is provided in which the magnet is wound in a toroidal fashion such that the magnetic field produced is contained only within the bore of the magnet, and thus producing a very low external field. The superconducting magnet includes a coolant channel disposed through the wire. The bore of the magnet comprises a storage volume in which cryogenic coolant is stored, and this volume supplies the coolant to be delivered to the coolant channel in the magnet.

Herring, J. Stephen (Idaho Falls, ID)

1992-01-01T23:59:59.000Z

17

Battery energy storage and superconducting magnetic energy storage for utility applications: A qualitative analysis  

DOE Green Energy (OSTI)

This report was prepared at the request of the US Department of Energy`s Office of Energy Management for an objective comparison of the merits of battery energy storage with superconducting magnetic energy storage technology for utility applications. Conclusions are drawn regarding the best match of each technology with these utility application requirements. Staff from the Utility Battery Storage Systems Program and the superconductivity Programs at Sandia National contributed to this effort.

Akhil, A.A.; Butler, P.; Bickel, T.C.

1993-11-01T23:59:59.000Z

18

Superconducting magnetic energy storage for asynchronous electrical systems  

DOE Patents (OSTI)

It is an object of the present invention to provide superconducting magnetic energy storage for a plurality of asynchronous electrical systems. It is a further object of the present invention to provide load leveling and stability improvement in a plurality of independent ac systems using a single superconducting magnetic energy storage coil.

Boenig, H.J.

1984-05-16T23:59:59.000Z

19

Toroidal constant-tension superconducting magnetic energy storage units  

DOE Patents (OSTI)

A superconducting magnetic energy storage unit is provided in which the magnet is wound in a toroidal fashion such that the magnetic field produced is contained only within the bore of the magnet, and thus producing a very low external field. The superconducting magnet includes a coolant channel disposed through the wire. The bore of the magnet comprises a storage volume in which cryogenic coolant is stored, and this volume supplies the coolant to be delivered to the coolant channel in the magnet. 6 figs.

Herring, J.S.

1992-11-03T23:59:59.000Z

20

Flywheel energy storage using superconducting magnetic bearings  

DOE Green Energy (OSTI)

Storage of electrical energy on a utility scale is currently not practicable for most utilities, preventing the full utilization of existing base-load capacity. A potential solution to this problem is Flywheel Energy Storage (FES), made possible by technological developments in high-temperature superconducting materials. Commonwealth Research Corporation (CRC), the research arm of Commonwealth Edison Company, and Argonne National Laboratory are implementing a demonstration project to advance the state of the art in high temperature superconductor (HTS) bearing performance and the overall demonstration of efficient Flywheel Energy Storage. Currently, electricity must be used simultaneously with its generation as electrical energy storage is not available for most utilities. Existing storage methods either are dependent on special geography, are too expensive, or are too inefficient. Without energy storage, electric utilities, such as Commonwealth Edison Company, are forced to cycle base load power plants to meet load swings in hourly customer demand. Demand can change by as much as 30% over a 12-hour period and result in significant costs to utilities as power plant output is adjusted to meet these changes. HTS FES systems can reduce demand-based power plant cycling by storing unused nighttime capacity until it is needed to meet daytime demand.

Abboud, R.G. [Commonwealth Research Corp., Chicago, IL (United States); Uherka, K.; Hull, J.; Mulcahy, T. [Argonne National Lab., IL (United States)

1994-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

MAXIMIZING MAGNETIC ENERGY STORAGE IN THE SOLAR CORONA  

Science Conference Proceedings (OSTI)

The energy that drives solar eruptive events such as coronal mass ejections (CMEs) almost certainly originates in coronal magnetic fields. Such energy may build up gradually on timescales of days or longer before its sudden release in an eruptive event, and the presence of free magnetic energy capable of rapid release requires nonpotential magnetic fields and associated electric currents. For magnetic energy to power a CME, that energy must be sufficient to open the magnetic field to interplanetary space, to lift the ejecta against solar gravity, and to accelerate the material to speeds of typically several hundred km s{sup -1}. Although CMEs are large-scale structures, many originate from relatively compact active regions on the solar surface-suggesting that magnetic energy storage may be enhanced when it takes place in smaller magnetic structures. This paper builds on our earlier work exploring energy storage in large-scale dipolar and related bipolar magnetic fields. Here we consider two additional cases: quadrupolar fields and concentrated magnetic bipoles intended to simulate active regions. Our models yield stored energies whose excess over that of the corresponding open field state can be greater than 100% of the associated potential field energy; this contrasts with maximum excess energies of only about 20% for dipolar and symmetric bipolar configurations. As in our previous work, energy storage is enhanced when we surround a nonpotential field with a strong overlying potential field that acts to 'hold down' the nonpotential flux as its magnetic energy increases.

Wolfson, Richard; Drake, Christina; Kennedy, Max, E-mail: wolfson@middlebury.edu [Department of Physics, Middlebury College, Middlebury, VT 05753 (United States)

2012-05-01T23:59:59.000Z

22

PURPA and Superconducting Magnetic Energy Storage: Energy Conservation, Environmental Protection and Entrepreneurial Opportunity in the Next Technological Revolution  

E-Print Network (OSTI)

SUPERCONDUCTING MAGNETIC ENERGY STORAGE Corp. ,60 the Unitednational defense, 7 energy storage and environmental protec-and accompanying text. 8. Energy storage and the resulting

Bovett, Robert E.

1988-01-01T23:59:59.000Z

23

Superconducting magnetic energy storage for electric utilities and fusion systems  

DOE Green Energy (OSTI)

Superconducting inductors provide a compact and efficient means of storing electrical energy without an intermediate conversion process. Energy storage inductors are under development for load leveling and transmission line stabilization in electric utility systems and for driving magnetic confinement and plasma heating coils in fusion energy systems. Fluctuating electric power demands force the electric utility industry to have more installed generating capacity than the average load requires. Energy storage can increase the utilization of base-load fossil and nuclear power plants for electric utilities. The Los Alamos Scientific Laboratory and the University of Wisconsin are developing superconducting magnetic energy storage (SMES) systems, which will store and deliver electrical energy for load leveling, peak shaving, and the stabilization of electric utility networks. In the fusion area, inductive energy transfer and storage is being developed. Both 1-ms fast-discharge theta-pinch systems and 1-to-2-s slow energy transfer tokamak systems have been demonstrated. The major components and the method of operation of a SMES unit are described, and potential applications of different size SMES systems in electric power grids are presented. Results are given of a reference design for a 10-GWh unit for load leveling, of a 30-MJ coil proposed for system stabilization, and of tests with a small-scale, 100-kJ magnetic energy storage system. The results of the fusion energy storage and transfer tests are presented. The common technology base for the various storage systems is discussed.

Rogers, J.D.; Boenig, H.J.; Hassenzahl, W.V.

1978-01-01T23:59:59.000Z

24

Dynamic Analysis and Control of an Energy Storage Flywheel Rotor with Active Magnetic Bearings  

Science Conference Proceedings (OSTI)

Flywheel energy storage is a promising technology for providing intermediate energy storage. An energy storage flywheel is supported by active magnetic bearings (AMBs) to achieve high speed running and increase energy efficiency of the energy storage ... Keywords: Flywheel, Energy Storage, Magnetic Bearing, Rotor Dynamics

Zhang Kai; Dai Xingjian; Zhang Xiaozhang

2010-12-01T23:59:59.000Z

25

Low energy proton storage ring with longitudinal magnetic  

E-Print Network (OSTI)

Proton energy 1,75 MeV Energy spread ±3,2 % = ±56 keV (2) Current (DC) 100 mkA Transverse size ±10 mm (2Low energy proton storage ring with longitudinal magnetic field and electron cooling M.I. Bryzgunov energy protons. In this particular case it is reaction for production of resonant gamma-quant (9.17 Me

26

Superconducting magnetic energy storage for asynchronous electrical systems  

DOE Patents (OSTI)

A superconducting magnetic energy storage coil connected in parallel between converters of two or more ac power systems provides load leveling and stability improvement to any or all of the ac systems. Control is provided to direct the charging and independently the discharging of the superconducting coil to at least a selected one of the ac power systems.

Boenig, Heinrich J. (Los Alamos, NM)

1986-01-01T23:59:59.000Z

27

Flywheel energy storage with superconductor magnetic bearings  

DOE Patents (OSTI)

A flywheel having superconductor bearings has a lower drag to lift ratio that translates to an improvement of a factor of ten in the rotational decay rate. The lower drag results from the lower dissipation of melt-processed YBCO, improved uniformity of the permanent magnet portion of the bearings, operation in a different range of vacuum pressure from that taught by the art, and greater separation distance from the rotating members of conductive materials.

Weinberger, Bernard R. (Avon, CT); Lynds, Jr., Lahmer (Glastonbury, CT); Hull, John R. (Hinsdale, IL)

1993-01-01T23:59:59.000Z

28

Microcomputer control for the superconducting magnetic energy storage system  

DOE Green Energy (OSTI)

The microcomputer-based, automatic control and data acquisition system for the Superconducting Magnetic Energy Storage system is described. A brief discussion of the function of SMES and identification of its major systems is followed by a detailed discussion of the control and data acquisition system. The distributed control and data acquisition architecture, interprocessor timing and communications, task scheduler, master-slave relationship, and man/machine interface are some of the topics discussed.

Seamons, M.J.; Criscuolo, A.L.

1981-01-01T23:59:59.000Z

29

Feasible utility scale Superconducting Magnetic Energy Storage system  

DOE Green Energy (OSTI)

This paper presents the latest design features and estimated costs of a 5000 MWh/1000 MW Superconducting Magnetic Energy Storage (SMES) plant. SMES is proposed as a commercially viable technology for electric utility load leveling. The primary advantage of SMES over other electrical energy storage technologies is its high net roundtrip efficiency. Other features include rapid availability and low maintenance and operating costs. Economic comparisons are made with other energy storage options and with gas turbines. In a diurnal load leveling application, a superconducting coil can be charged from the utility grid during off-peak hours. The ac grid is connected to the dc magnetic coil through a power conversion system that includes an inverter/rectifier. Once charged, the superconducting coil conducts current, which supports an electromagnetic field, with virtually no losses. During hours of peak load, the stored energy is discharged to the grid by reversing the charging process. The principle of operation of a SMES unit is shown in Fig. 1. For operation in the superconducting mode, the coil is maintained at extremely low temperature by immersion in a bath of liquid helium.

Loyd, R.J.; Schoenung, S.M.; Nakamura, T.; Lieurance, D.W.; Hilal, M.A.; Rogers, J.D.; Purcell, J.R.; Hassenzahl, W.V.

1986-01-01T23:59:59.000Z

30

Computer-automated controls for superconducting magnetic energy storage  

DOE Green Energy (OSTI)

A computer-automated control system that allows unmanned operation of the Superconducting Magnetic Energy Storage (SMES) system has been designed and almost completely installed at Los Alamos National Laboratory. In addition to unmanned operation, the computer offers continual monitoring and recording of all the important SMES signals, operator guidance in starting up and maintaining SMES, emergency shutdown control, and high-speed data acquisition for failure diagnosis. The major components of the computer-automated control system are two slave computers that perform the data acquisition and a master computer that performs the control.

Criscuolo, A.L.

1981-01-01T23:59:59.000Z

31

Control aspects of the Tacoma superconducting magnetic energy storage project  

SciTech Connect

On February 16, 1983, a 10 MW/30 MJ superconducting magnetic energy storage unit was energized at the Bonneville Power Administration (BPA) substation in Tacoma, Washington. The unit was retired a year later, after extensive tests directed toward its experimental use as a small-signal stabilizer for the Pacific AC Intertie. This paper addresses the control aspects of the project. These include the response characteristics of the unit, a-priori modeling of power system response, tradeoffs in control-law design, measured power system dynamics, and projection of unit effectiveness as a stabilizer.

Hauer, J.F.; Boenig, H.J.

1987-05-01T23:59:59.000Z

32

Superconducting Magnetic Energy Storage in Trapped Field Magnets of High Temperature Superconductors  

Science Conference Proceedings (OSTI)

Superconducting permanent magnets for storing high magnetic fields can serve as a means of energy storage and are useful in applications ranging from motors and generators to fault current limiters and circuit breakers. This report presents the results of experimental studies on high temperature superconductors, which were successfully used to trap a record high stable magnetic field of 83,000 G at 54 K and 100,000 G at 42 K.

1995-12-29T23:59:59.000Z

33

Superconducting magnetic energy storage for electric power system dynamic stabilization  

DOE Green Energy (OSTI)

A Superconducting Magnetic Energy Storage (SMES) system is being developed at the Los Alamos Scientific Laboratory (LASL) for a dynamic stabilizer to be installed in the Bonneville Power Administration (BPA) power system at Tacoma, Washington, by 1982. This unit will be an alternate stabilization method to the dc modulator now used to stabilize the 900 mile, ac intertie between BPA and Southern California. The generation control systems' response to the constantly occuring, small-load and voltage changes can result in negatively damped, low-frequency power oscillations. The dc modulator provides stabilization by fast load control of the High-Voltage dc (HVDC). The SMES unit consists of a 30-MJ solenoid, a 10 MW convertor, a liquid helium dewar and auxiliary systems which operate independent of the HVDC system. The SMES dynamic stabilizer design is presented with status information about the superconducting coil, the converter and other components of the SMES dynamic stabilizer summarized.

Turner, R.

1979-01-01T23:59:59.000Z

34

Superconducting Magnetic Energy Storage for electric power system dynamic stabilization  

DOE Green Energy (OSTI)

A Superconducting Magnetic Energy Storage (SMES) system is being developed at the Los Alamos Scientific Laboratory (LASL) for a dynamic stabilizer to be installed in the Bonneville Power Administration (BPA) power system at Tacoma, Washington, by 1982. This unit will be an alternate stabilization method to the dc modulator now used to stabilize the 900 mile, ac intertie between BPA and Southern California. The generation control systems' response to the constantly occurring, small-load and voltage changes can result in negatively damped, low-frequency power oscillations. The dc modulator provides stabilization by fast load control of the High-Voltage dc (HVDC). The SMES unit consists of a 30-MJ solenoid, a 10-MW convertor, a liquid helium dewar, and auxiliary systems which operate independent of the HVDC system. The SMES dynamic stabilizer design is presented and status information is given about the superconducting coil, the converter, and other components of the SMES dynamic stabilizer.

Turner, R.D.

1979-01-01T23:59:59.000Z

35

Superconducting magnetic energy storage for BPA transmission-line stabilization  

DOE Green Energy (OSTI)

The Bonneville Power Administration (BPA) operates the electrical transmission system that joins the Pacific Northwest with southern California. A 30 MJ (8.4 kWh) Superconducting Magnetic Energy Storage (SMES) unit with a 10 MW converter is being installed at the Tacoma Substation to provide system damping for low frequency oscillations of 0.35 Hz. The integrated system status is described and reviewed. Components included in the system are the superconducting coil, seismically mounted in an epoxy fiberglass nonconducting dewar; a helium refrigerator; a heat rejection subsystem; a high pressure gas recovery subsystem; a liquid nitrogen trailer; the converter with power transformers and switchgear; and a computer system for remote microwave link operation of the SMES unit.

Rogers, J.D.; Barron, M.H.; Boenig, H.J.; Criscuolo, A.L.; Dean, J.W.; Schermer, R.I.

1982-01-01T23:59:59.000Z

36

1-GWh diurnal load-leveling superconducting magnetic energy storage system reference design. Appendix A: energy storage coil and superconductor  

DOE Green Energy (OSTI)

The technical aspects of a 1-GWh Superconducting Magnetic Energy Storage (SMES) coil for use as a diurnal load-leveling device in an electric utility system are presented. The superconductor for the coil is analyzed, and costs for the entire coil are developed.

Schermer, R.I.

1979-09-01T23:59:59.000Z

37

Design and cost of a utility scale superconducting magnetic energy storage plant  

DOE Green Energy (OSTI)

Superconducting Magnetic Energy Storage (SMES) has potential as a viable technology for use in electric utility load leveling. The advantage of SMES over other energy storage technologies is its high net roundtrip energy efficiency. This paper reports the major features and costs of a jointly developed 5000 MWh SMES plant design.

Loyd, R.J.; Nakamura, T.; Schoenung, S.M.; Lieurance, D.W.; Hilal, M.A.; Rogers, J.D.; Purcell, J.R.; Hassenzahl, W.V.

1985-01-01T23:59:59.000Z

38

Survey of domestic research on superconducting magnetic energy storage  

DOE Green Energy (OSTI)

This report documents the results of a survey of domestic research on superconducting magnetic energy storage (SMES) undertaken with the support of the Oak Ridge National Laboratory (ORNL) Superconductivity Pilot Center. Each survey entry includes the following: Name, address, and other telephone and facsimile numbers of the principal investigator and other staff members; funding for fiscal year 1991, 1992, 1993; brief descriptions of the program, the technical progress to date, and the expected technical progress; a note on any other collaboration. Included with the survey are recommendations intended to help DOE decide how best to support SMES research and development (R&D). To summarize, I would say that important elements of a well-rounded SMES research program for DOE are as follows. (1) Construction of a large ETM. (2) Development of SMES as an enabling technology for solar and wind generation, especially in conjunction with the ETM program, if possible. (3) Development of small SMES units for electric networks, for rapid transit, and as noninterruptible power supplies [uses (2), (3), and (4) above]. In this connection, lightweight, fiber-reinforced polymer structures, which would be especially advantageous for space and transportation applications, should be developed. (4) Continued study of the potential impacts of high-temperature superconductors on SMES, with construction as soon as feasible of small SMES units using high-temperature superconductors (HTSs).

Dresner, L.

1991-09-01T23:59:59.000Z

39

Survey of domestic research on superconducting magnetic energy storage  

DOE Green Energy (OSTI)

This report documents the results of a survey of domestic research on superconducting magnetic energy storage (SMES) undertaken with the support of the Oak Ridge National Laboratory (ORNL) Superconductivity Pilot Center. Each survey entry includes the following: Name, address, and other telephone and facsimile numbers of the principal investigator and other staff members; funding for fiscal year 1991, 1992, 1993; brief descriptions of the program, the technical progress to date, and the expected technical progress; a note on any other collaboration. Included with the survey are recommendations intended to help DOE decide how best to support SMES research and development (R D). To summarize, I would say that important elements of a well-rounded SMES research program for DOE are as follows. (1) Construction of a large ETM. (2) Development of SMES as an enabling technology for solar and wind generation, especially in conjunction with the ETM program, if possible. (3) Development of small SMES units for electric networks, for rapid transit, and as noninterruptible power supplies (uses (2), (3), and (4) above). In this connection, lightweight, fiber-reinforced polymer structures, which would be especially advantageous for space and transportation applications, should be developed. (4) Continued study of the potential impacts of high-temperature superconductors on SMES, with construction as soon as feasible of small SMES units using high-temperature superconductors (HTSs).

Dresner, L.

1991-09-01T23:59:59.000Z

40

Technologies for energy storage flywheels and super conducting magnetic energy storage  

DOE Green Energy (OSTI)

A flywheel is an electromechanical storage system in which energy is stored in the kinetic energy of a rotating mass. Flywheel systems under development include those with steel flywheel rotors and resin/glass or resin/carbon-fiber composite rotors. The mechanics of energy storage in a flywheel system are common to both steel- and composite-rotor flywheels. In both systems, the momentum of the rotating rotor stores energy. The rotor contains a motor/generator that converts energy between electrical and mechanical forms. In both types of systems, the rotor operates in a vacuum and spins on bearings to reduce friction and increase efficiency. Steel-rotor systems rely mostly on the mass of the rotor to store energy while composite flywheels rely mostly on speed. During charging, an electric current flows through the motor increasing the speed of the flywheel. During discharge, the generator produces current flow out of the system slowing the wheel down. The basic characteristics of a Flywheel system are shown. Steel flywheel systems are currently being marketed in the US and Germany and can be connected in parallel to provide greater power if required. Sizes range from 40kW to 1.6MW for times of 5--120 seconds. At this time sales are limited but growing. The suppliers of the composite type flywheel systems are currently in the prototype stages of development. Flywheel systems offer several potential advantages. FES systems, as their developers envision them will have exceptionally long service lives and low life-cycle costs as a result of minimal O and M requirements. FES systems are compact and self-contained allowing them to be placed in tight quarters, and they contain no hazardous chemicals nor do they produce flammable gases.

BOYES,JOHN D.

2000-04-26T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

ESS 2012 Peer Review - Magnetic Composites for Flywheel Energy Storage - Jim Martin, SNL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

subsidiary subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Photos placed in horizontal position with even amount of white space between photos and header Photos placed in horizontal position with even amount of white space between photos and header Magnetic composites for flywheel energy storage September 27, 2012 James E. Martin Project description  The bearings currently used in energy storage flywheels dissipate a significant amount of energy. Magnetic bearings would reduce these losses appreciably.  Magnetic bearings require magnetic materials on an inner annulus of the flywheel for magnetic levitation.  This magnetic material must be able to withstand a 2% tensile deformation, yet

42

Evaluation of Superconducting Magnetic Energy Storage for San Diego Gas and Electric Company  

Science Conference Proceedings (OSTI)

By providing rapid-response, real-power (P) or reactive-power (Q) modulation, superconducting magnetic energy storage (SMES) devices can increase power transfer capabilities. This report documents two phases of a technical study to determine potential benefits of locating a SMES unit at San Diego Gas and Electric's Blythe site.

1997-08-21T23:59:59.000Z

43

The design of new wind power controller based on Superconducting Magnetic Energy Storage  

Science Conference Proceedings (OSTI)

The fluctuation and intermittent with wind power output, as a key factor to connect a large-scale wind power system to grid, which result s in an adverse impact on the power system continues to grow. In order to reduce the net stability impact of the ... Keywords: Wind Farm, Superconducting Magnetic Energy Storage, Wind Power, Applied Superconductivity

Zhou Xue-Song; Quan Bo; Ma You-Jie; Wu Le

2010-08-01T23:59:59.000Z

44

Energy Storage  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National Laboratories September 27, 2007 San Francisco, CA PEER REVIEW 2007 DOE(SNL)CEC Energy Storage Program FYO7 Projects Sandia is a multiprogram laboratory operated by...

45

Test and evaluation of conductors for superconducting magnetic energy storage  

DOE Green Energy (OSTI)

Pancake coils of a monolithic conductor and several different types of braid and cable, using a variety of insulating tapes and bonding resins were constructed. The coils were tested to quench in self-field at currents up to 2700 A. Results are presented for the training behavior of the various coils as compared to short-sample tests. A conductor composed of several braids or cables in parallel, which will be suitable for the in situ fabrication of large magnets is described.

Schermer, R.I.; Hassenzahl, W.V.

1976-01-01T23:59:59.000Z

46

Flywheel Energy Storage Module  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

kWh100 kW Flywheel Energy Storage Module * 100KWh - 18 cost KWh vs. current State of the Art * Bonded Magnetic Bearings on Rim ID * No Shaft Hub (which limits surface speed)...

47

Energy Storage  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Development Concept Nitrogen-Air Battery F.M. Delnick, D. Ingersoll, K.Waldrip Sandia National Laboratories Albuquerque, NM presented to U.S. DOE Energy Storage Systems...

48

Plant and operational features of the BPA 30 MJ superconducting magnetic energy storage system  

DOE Green Energy (OSTI)

A 30 MJ superconducting magnetic energy storage (SMES) system was designed and developed for application in the Western US Power System to damp power oscillations that limit high voltage ac transmission. The system is in place at the Bonneville Power Administration (BPA) Tacoma Substation and has been in an experimental use for over a year. Extended operations of the unit have been undertaken with success. The physical, electrical, and operational features of the SMES system are given.

Rogers, J.D.; Hauer, J.F.

1984-01-01T23:59:59.000Z

49

30 MJ superconducting magnetic energy storage stabilizing coil. Final report for construction  

DOE Green Energy (OSTI)

This report covers Phase II, Fabrication and Delivery of the 30 MJ Superconducting Magnetic Energy Storage Stabilizing Coil. A history of the manufacturing and assembly phase of the magnet is presented. Major problems and solutions are summarized, and illustrations of the major operations are provided. The Quality Assurance program is described with a listing of all nonconformance reports. Design documentation is provided, including a Design Document Index, monthly progress reports, and a list of papers given on the project. Appendices to the report contain copies of released and revised design calculations, test reports, assembly procedure, and nonconformance reports and engineering dispositions.

NONE

1983-03-01T23:59:59.000Z

50

Assessment of biological effects associated with magnetic fields from a superconducting magnetic energy storage plant: Final report. [Contains glossary  

DOE Green Energy (OSTI)

This report provides a detailed evaluation of the potential biological effects of fringe magnetic fields associated with a superconducting magnetic energy storage (SMES) plant. The aspects of magnetic fields that are discussed include mechanisms of interaction of static and slowly time-varying magnetic fields with living systems; biological effects of magnetic fields on human and subhuman species, including the results of both laboratory studies and human epidemiological surveys; physical hazards posed by the interactions of magnetic fields with metallic implants, e.g., aneurysm clips and prostheses, and with medical electronic devices such as cardiac pacemakers; extant guidelines for occupational exposure to magnetic fields are summarized; recommendations for defining acceptable levels of exposure to SMES magnetic fields by occupational personnel and the population-at-large; and recommendations concerning several areas of research that would further our understanding of magnetic field interactions with living systems, and would provide additional elements of information required for the development of future exposure standards. 328 refs., 12 figs., 5 tabs.

Tenforde, T.S.

1986-04-01T23:59:59.000Z

51

Flywheel Energy Storage Module  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

kWh/100 kW kWh/100 kW Flywheel Energy Storage Module * 100KWh - 1/8 cost / KWh vs. current State of the Art * Bonded Magnetic Bearings on Rim ID * No Shaft / Hub (which limits surface speed) * Flexible Motor Magnets on Rim ID * Develop Touch-down System for Earthquake Flying Rim Eliminate Shaft and Hub Levitate on Passive Magnetic Bearings Increase Rim Tip Speed Larger Diameter Thinner Rim Stores More Energy 4 X increase in Stored Energy with only 60% Increase in Weight Development of a 100 kWh/100 kW Flywheel Energy Storage Module High Speed, Low Cost, Composite Ring with Bore-Mounted Magnetics Current State of the Art Flywheel Limitations of Existing Flywheel * 15 Minutes of storage * Limited to Frequency Regulation Application * Rim Speed (Stored Energy) Limited by Hub Strain and Shaft Dynamics

52

Energy Storage  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Development Concept Development Concept Nitrogen-Air Battery F.M. Delnick, D. Ingersoll, K.Waldrip Sandia National Laboratories Albuquerque, NM presented to U.S. DOE Energy Storage Systems Research Program Washington, DC November 2-4, 2010 Sandia National Laboratories is a multi-program laboratory operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin company, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Funded by the Energy Storage Systems Program of the U.S. Department Of Energy through Sandia National Laboratories Full Air Breathing Battery Concept * Concept is to use O 2 and N 2 as the electrodes in a battery * Novel because N 2 is considered inert * Our group routinely reacts N 2 electrochemically

53

Analysis of superconducting magnetic energy storage applications at a proposed wind farm site near Browning, Montana  

DOE Green Energy (OSTI)

A computer program was developed to analyze the viability of integrating superconducting magnetic energy storage (SMES) with proposed wind farm scenarios at a site near Browning, Montana. The program simulated an hour-by-hour account of the charge/discharge history of a SMES unit for a representative wind-speed year. Effects of power output, storage capacity, and power conditioning capability on SMES performance characteristics were analyzed on a seasonal, diurnal, and hourly basis. The SMES unit was assumed to be charged during periods when power output of the wind resource exceeded its average value. Energy was discharged from the SMES unit into the grid during periods of low wind speed to compensate for below-average output of the wind resource. The option of using SMES to provide power continuity for a wind farm supplemented by combustion turbines was also investigated. Levelizing the annual output of large wind energy systems operating in the Blackfeet area of Montana was found to require a storage capacity too large to be economically viable. However, it appears that intermediate-sized SMES economically levelize the wind energy output on a seasonal basis.

Gaustad, K.L.; De Steese, J.G.

1993-07-01T23:59:59.000Z

54

AQUIFER THERMAL ENERGY STORAGE  

E-Print Network (OSTI)

aquifers for thermal energy storage. Problems outlined aboveModeling of Thermal Energy Storage in Aquifers," Proceed-ings of Aquifer Thermal Energy Storage Workshop, Lawrence

Tsang, C.-F.

2011-01-01T23:59:59.000Z

55

Storage | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Usage Storage Storage Energy storage isnt just for AA batteries. Thanks to investments from the Energy Department's energy.gov">Advanced Research...

56

AQUIFER THERMAL ENERGY STORAGE  

E-Print Network (OSTI)

using aquifers for thermal energy storage. Problems outlinedmatical Modeling of Thermal Energy Storage in Aquifers,"Proceed- ings of Aquifer Thermal Energy Storage Workshop,

Tsang, C.-F.

2011-01-01T23:59:59.000Z

57

Superconducting magnetic energy storage (SMES) program, January 1-December 31, 1981  

DOE Green Energy (OSTI)

Work reported is on the development of a 30 MJ superconducting magnetic energy storage (SMES) unit for use by the Bonneville Power Administration (BPA) to stabilize power oscillations on their Pacific AC Intertie. The 30 MJ superconducting coil manufacture was completed. Design of the seismic mounting of the coil to the nonconducting dewar lid and a concrete foundation is complete. The superconducting application VAR (SAVAR) control study indicated a low economic advantage and the SAVAR program was terminated. An economic and technological evaluation of superconducting fault current limiter (SFCL) was completed and the results are reported.

Rogers, J.D. (comp.)

1982-02-01T23:59:59.000Z

58

30-MJ superconducting magnetic energy storage for BPA transmission-line stabilizer  

DOE Green Energy (OSTI)

The Bonneville Power Administration operates the transmission system that joins the Pacific Northwest and southern California. A 30 MJ (8.4 kWh) superconducting Magnetic Energy Storage (SMES) unit with a 10 MW converter can provide system damping for low frequency oscillations. The unit is scheduled to operate in late 1982. Progress to date is described. The coil is complete. All major components of the electrical and cryogenic systems have been received and testing has begun. Computer control hardware is in place and software development is proceeding. Support system components and dewar lid are being fabricated and foundation design is complete. A contract for dewar fabrication is being negotiated.

Schermer, R.I.

1981-01-01T23:59:59.000Z

59

30-MJ superconducting magnetic-energy storage for BPA transmission-line stabilizer  

DOE Green Energy (OSTI)

The Bonneville Power Administration operates the transmission system that joins the Pacific Northwest and southern California. A 30 MJ (8.4 kWh) Superconducting Magnetic Energy Storage (SMES) unit with a 10 MW converter can provide system damping for low frequency oscillations. The unit is scheduled to operate in 1982. Progress during FY 81 is described. The coil is complete. All major components of the electrical and cryogenic systems have been received and testing has begun. Computer control hardware is in place and software development is proceeding. Support system components and dewar lid are being fabricated and foundation design is complete. A contract for dewar fabrication is being negotiated.

Schermer, R.I.

1981-01-01T23:59:59.000Z

60

Energy Storage  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Daniel R. Borneo, PE Daniel R. Borneo, PE Sandia National Laboratories September 27, 2007 San Francisco, CA PEER REVIEW 2007 DOE(SNL)/CEC Energy Storage Program FYO7 Projects Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy under contract DE-AC04-94AL85000. 2 Presentation Outline * DOE(SNL)/CEC Collaboration - Background of DOE(SNL)/CEC Collaboration - FY07 Project Review * Zinc Bromine Battery (ZBB) Demonstration * Palmdale Super capacitor Demonstration * Sacramento Municipal Utility District (SMUD) Regional Transit (RT) Super capacitor demonstration * Beacon Flywheel Energy Storage System (FESS) 3 Background of DOE(SNL)/CEC Collaboration * Memorandum of Understanding Between CEC and DOE (SNL). - In Place since 2004

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Superconductive Magnetic Energy Storage (SMES) System Studies for Electrical Utility at Wisconsin  

E-Print Network (OSTI)

Two-layer low aspect ratio rippled and non-rippled solenoids mounted in surface trenches are described for superconductive magnetic energy storage utility applications. Open pool cooling in superfluid helium provides extended time cryogenic stability. Axial structure also functions as a protective heat absorbing secondary during emergency discharge. The cost of the conductor, trench, dewar, struts, radial structure, plus others are proportional to E^ 2/3 where E= stored energy; the cost of the axial structure is approximately E; and the cost of refrigeration is a constant plus an E^2/3 term. Costs scale approximately from E^0.58 (low E) to E^0.71 (100 - 3000 MWh) to E ^0.78 (3000 to 10,000 MWh). The cost of the ac-dc conversion system is about $60/kW. The electrical usage is best for load-leveling units that charge 8 h at night and discharge 15 h during the daytime. 98% storage efficiency and rapid power reversal are the two primary benefits of SMES. The potential impact of high Tc oxide superconductors is a 10%-20% cost reduction for large SMES units (above 3000 MWh). The operational storage efficiency of smaller units would improve to better than 95% for E > 10 MWh.

Boom, R. W.; Eyssa, Y. M.; Abdelsalem, M. K.; Huang, X.

1988-09-01T23:59:59.000Z

62

COMMERCIALIZATION DEMONSTRATION OF MID-SIZED SUPERCONDUCTING MAGNETIC ENERGY STORAGE TECHNOLOGY FOR ELECTRIC UTILITYAPPLICATIONS  

DOE Green Energy (OSTI)

As an outgrowth of the Technology Reinvestment Program of the 1990’s, an Agreement was formed between BWXT and the DOE to promote the commercialization of Superconducting Magnetic Energy Storage (SMES) technology. Business and marketing studies showed that the performance of electric transmission lines could be improved with this SMES technology by stabilizing the line thereby allowing the reserved stability margin to be used. One main benefit sought was to double the capacity and the amount of energy flow on an existing transmission line by enabling the use of the reserved stability margin, thereby doubling revenue. Also, electrical disturbances, power swings, oscillations, cascading disturbances and brown/black-outs could be mitigated and rendered innocuous; thereby improving power quality and reliability. Additionally, construction of new transmission lines needed for increased capacity could be delayed or perhaps avoided (with significant savings) by enabling the use of the reserved stability margin of the existing lines. Two crucial technical aspects were required; first, a large, powerful, dynamic, economic and reliable superconducting magnet, capable of oscillating power flow was needed; and second, an electrical power interface and control to a transmission line for testing, demonstrating and verifying the benefits and features of the SMES system was needed. A project was formed with the goals of commercializing the technology by demonstrating SMES technology for utility applications and to establish a domestic capability for manufacturing large superconducting magnets for both commercial and defense applications. The magnet had very low AC losses to support the dynamic and oscillating nature of the stabilizing power flow. Moreover, to economically interface to the transmission line, the magnet had the largest operating voltage ever made. The manufacturing of that design was achieved by establishing a factory with newly designed and acquired equipment, tooling, methods and skilled personnel. The final magnet system measured 14 feet in diameter, 10 feet in height, and weighed about 35 tons. The superconducting magnet and design technology was successfully implemented and demonstrated. The project was not successfully concluded however; as the critical planned final demonstration was not achieved. The utilities could not understand or clarify their future business needs and the regulatory requirements, because of the deregulation policies and practices of the country. Much uncertainty existed which prevented utilities from defining business plans, including asset allocation and cost recovery. Despite the technical successes and achievements, the commercial development could not be implemented and achieved. Thus, the demonstration of this enhancement to the utility’s transmission system and to the reliability of the nation’s electrical grid was not achieved. The factory was ultimately discontinued and the technology, equipment and product were placed in storage.

CHARLES M. WEBER

2008-06-24T23:59:59.000Z

63

Superconducting magnetic energy storage (SMES) program. Progress report, January 1-December 31, 1980  

DOE Green Energy (OSTI)

Work is reported on the development of two superconducting magnetic energy storage (SMES) units. One is a 30-MJ unit for use by the Bonneville Power Administration (BPA) to stabilize power oscillations on their Pacific AC Intertie, and the second is a 1- to 10-GWh unit for use as a diurnal load leveling device. Emphasis has been on the stabilizing system. The manufacturing phase of the 30-MJ superconducting coil was initiated and the coil fabrication has advanced rapidly. The two converter power transformers were manufactured, successfully factory tested, and shipped. One transformer reached the Tacoma Substation in good condition; the other was dropped enroute and has been returned to the factory for rebuilding. Insulation of the 30-MJ coil has been examined for high voltage effects apt to be caused by transients such as inductive voltage spikes from the protective dump circuit. The stabilizing system converter and protective energy dump system were completed, factory tested, and delivered.

Rogers, J.D. (comp.)

1981-03-01T23:59:59.000Z

64

Energy Storage - More Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage - More Information Energy Storage - More Information Energy Storage - More Information As energy storage technology may be applied to a number of areas that differ in power and energy requirements, DOE's Energy Storage Program performs research and development on a wide variety of storage technologies. This broad technology base includes batteries (both conventional and advanced), flywheels, electrochemical capacitors, superconducting magnetic energy storage (SMES), power electronics, and control systems. The Energy Storage Program works closely with industry partners, and many of its projects are highly cost-shared. The Program collaborates with utilities and State energy organizations such as the California Energy Commission and New York State Energy Research and Development Authority to field major pioneering storage installations that

65

A COMPARISON OF THE CONDUCTOR REQUIREMENTS FOR ENERGY STORAGE DEVICES MADE WITH IDEAL COIL GEOMETRIES  

E-Print Network (OSTI)

Superconducting Magnetic Energy Storage Program," Los AlamosWisconsin Superconductive Energy Storage Project. Y2!.l,J. J. Stekly, "Magnetic Energy Storage Using Superconducting

Hassenzahl, W.

2011-01-01T23:59:59.000Z

66

Tests of the 30-MJ superconducting magnetic-energy storage unit  

DOE Green Energy (OSTI)

A 30-MJ (8.4 kWh) superconducting magnetic energy storage (SMES) unit with a 10-MW converter was installed during the later months of 1982 at the Bonneville Power Administration (BPA) Tacoma substation in Tacoma, Washington. The unit, which is capable of absorbing and releasing up to 10 MJ of energy at a frequency of 0.35 Hz, was designed to damp the dominant power swing mode of the Pacific AC Intertie. Extensive tests were performed with the unit during the first half of 1983. This paper will review the major components of the storage unit and describe the startup and steady state operating experience with the coil, dewar, refrigerator and converter. The unit has absorbed power up to a level of 11.8 Mw. Real power was modulated following a sinusoidal power demand with frequencies from 0.1 to 1.2 Hz and a power level up to +- 8.3 MW. The unit has performed in accordance with design expectations and no major problems have developed.

Boenig, H.J.; Dean, J.W.; Rogers, J.D.; Schermer, R.I.; Hauer, J.F.

1983-01-01T23:59:59.000Z

67

Flywheel Energy Storage  

Science Conference Proceedings (OSTI)

Flywheels are under consideration as an alternative for electrochemical batteries in a variety of applications This summary report provides a discussion of the mechanics of flywheels and magnetic bearings, the general characteristics of inertial energy storage systems, design considerations for flywheel systems, materials for advanced flywheels, and cost considerations.

1997-09-03T23:59:59.000Z

68

Ambient-Temperature Passive Magnetic Bearings for Flywheel Energy Storage Systems  

DOE Green Energy (OSTI)

Based on prior work at the Lawrence Livermore National Laboratory ambient-temperature passive magnetic bearings are being adapted for use in high-power flywheel energy storage systems developed at the Trinity Flywheel Power company. En route to this goal specialized test stands have been built and computer codes have been written to aid in the development of the component parts of these bearing systems. The Livermore passive magnetic bearing system involves three types of elements, as follows: (1) Axially symmetric levitation elements, energized by permanent magnets., (2) electrodynamic ''stabilizers'' employing axially symmetric arrays of permanent magnet bars (''Halbach arrays'') on the rotating system, interacting with specially wound electrically shorted stator circuits, and, (3) eddy-current-type vibration dampers, employing axially symmetric rotating pole assemblies interacting with stationary metallic discs. The theory of the Livermore passive magnetic bearing concept describes specific quantitative stability criteria. The satisfaction of these criteria will insure that, when rotating above a low critical speed, a bearing system made up of the three elements described above will be dynamically stable. That is, it will not only be stable for small displacements from equilibrium (''Earnshaw-stable''), but will also be stable against whirl-type instabilities of the types that can arise from displacement-dependent drag forces, or from mechanical-hysteritic losses that may occur in the rotor. Our design problem thus becomes one of calculating and/or measuring the relevant stiffnesses and drag coefficients of the various elements and comparing our results with the theory so as to assure that the cited stability criteria are satisfied.

Bender, D.; Post, R.

2000-05-26T23:59:59.000Z

69

30-MJ superconducting magnetic energy storage for electric-transmission stabilization  

DOE Green Energy (OSTI)

The Bonneville Power Administration operates the electric power transmission system that connects the Pacific Northwest and southern California. The HVAC interties develop 0.35 Hz oscillations when the lines are heavily loaded. A 30 MJ (8.4 kWh) Superconducting Magnetic Energy Storage (SMES) unit with a 10 MW converter can provide system damping for the oscillation. The unit is scheduled for installation in 1982 and operation in 1982-83. Status of the project is described. The conductor has been fully tested electrically and mechanically and the 5 kA superconducting cable has been produced. The 30 MJ superconducting coil is essentially complete. All major components of the electrical and cryogenic systems except the nonconducting dewar have been completed. The refrigerator and converter are undergoing tests. The system is to be located at the BPA Tacoma Substation and operated by microwave link from Portland, OR.

Turner, R.D.; Rogers, J.D.

1981-01-01T23:59:59.000Z

70

Superconducting magnetic energy storage (SMES) program. January 1--December 31, 1978  

DOE Green Energy (OSTI)

Work is reported on the development of two superconducting magnetic energy storage units. One is a 30-MJ unit for use by the Bonneville Power Administration to stabilize power oscillations on their Pacific AC Intertie, and the second is a 1- to 10-GWh unit for use as a diurnal load-leveling device. Emphasis has been placed on the stabilizing system. The engineering specification design of the 30-MJ superconducting coil was completed and a contract will be placed for the coil fabrication design. Bids have been received for the stabilizing system 10-MW converter and coil protective dump resistor. These components will be purchased in 1979. The reference design for the 1- to 10-GWh diurnal load-leveling unit has been totally revised and is being assembled in redrafted report form. Plans are to build a 10- to 30-MWh prototype diurnal load-leveling demonstration unit.

Rogers, J.D. (comp.)

1979-02-01T23:59:59.000Z

71

Seasonal thermal energy storage  

DOE Green Energy (OSTI)

This report describes the following: (1) the US Department of Energy Seasonal Thermal Energy Storage Program, (2) aquifer thermal energy storage technology, (3) alternative STES technology, (4) foreign studies in seasonal thermal energy storage, and (5) economic assessment.

Allen, R.D.; Kannberg, L.D.; Raymond, J.R.

1984-05-01T23:59:59.000Z

72

Energy Storage Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage Testing The Advanced Vehicle Testing Activity is tasked by the U.S. Department of Energys Vehicle Technology Program to conduct various types of energy storage...

73

Design options and trade-offs in superconducting magnetic energy storage with irreversible switching  

SciTech Connect

From symposium on technology of controlled thermonuclear fusion experiments and the engineering aspects of fusion reactors; Austin, Texas, USA (20 Nov 1973). A program is presently under way at Los Alamos to determine how superconducting magnetic energy storage in conjunction with normal-going superconducting switches can be made to deliver the energies of the order of 200 MJ that will be needed for plasma compression in a pulsed THETA -pinch scientific feasibility experiment. After a review of the circuit configurations, the properties of commercially available and of some developmental superconductors relevant to both the energy storage coil and to the switch are discussed. Critical current densities at low fields and stability requirements both with respect to rapidity changing external fields and to self fields are of particular importance in determining optimum operating fields and temperatures. The trade-off between eddy current losses in the stabilizing material and the need for coil protection if a coil normalcy should occur is described. Problems in potting or other forms of mechanical stabilization for both superconducting elements are pointed out. The experimental phenomenon of an only partially normalized superconducting switch is described as are the conditions for attaining fully normal resistance. A number of cryogenic engineering problems are discussed briefly, including the requirements for plastic, non-conducting dewars and for a staged refrigerator to re-cool the switch in the most economical manner. Results of 20-kJ energy-transfer experiments into both resistive and inductive loads are given and the design parameters are reported for a 300-kJ experiment now under construction. (auth)

Laquer, H.L.; Lindsay, J.D.G.; Little, E.M.; Rogers, J.D.; Weldon, D.M.

1973-01-01T23:59:59.000Z

74

30-MJ superconducting magnetic energy storage system for electric utility transmission stabilization  

SciTech Connect

A superconducting magnetic energy storage (SMES) system has been built to damp power oscillations on the Western U.S. Power System, particularly on the Pacific AC Intertie that is used to transmit power from the Northwest to southern California. The 30-MJ superconducting inductor that stores energy for this purpose is contained in a nonconducting dewar and is supported by a helium refrigerator and a gas-handling system mounted on trailers. Energy flows in and out of the inductor at frequencies from 0.1 to 1.0 Hz with power amplitudes up to 11 MW. The principal oscillation to be damped has a characteristic frequency of 0.35 Hz. The superconducting coil maximum current is 5 kA with terminal voltages up to 2.2 kV. The coil interfaces with the Bonneville Power Administration 13.8-kV bus at the Tacoma Substation through a converter and transformers. The system can be operated with the converter either in parallel-bridge mode or for constant VAR control with the bridges in buck-boost mode. The program for the design, fabrication, installation, and the preliminary experimental operation of the system is reviewed.

Rogers, J.D.; Hauer, J.F.; Miller, B.L.; Schermer, R.J.

1982-09-01T23:59:59.000Z

75

30 MJ superconducting magnetic energy storage performance on the Bonneville Power Administration utility transmission system*  

DOE Green Energy (OSTI)

The 30 MJ, 10 MW superconducting magnetic energy storage (SMES) system was devised to interact in the Western U.S. Power System as an alternate means to damp unstable oscillations at 0.35 Hz on the Pacific HVAC Intertie. The SMES unit was installed at the Tacoma Substation of the Bonneville Power Administration (BPA). The operating limits of the 30 MJ SMES unit were established, and different means of controlling real and reactive power were tested. The unit can follow a sinusoidal power demand signal with an amplitude of up to 8.6 MW with the converter working in a 12 pulse mode. When the converter operates in the constant VAR mode, a time varying real power demand signal of up to 5 MW can be met. Experiments showed that the Pacific AC Intertie has current and reactive power variations of the same frequency as the modulating frequency of the SMES device. Endurance tests were run to assess the reliability of the SMES subsystems with a narrow band noise input, which is characteristic of the modulation signal for stabilizer operation. In this mode, the energy of the power spectrum is not concentrated at one frequency to avoid exciting a resonance frequency of the ac transmission system. During the endurance tests, parameters of the ac power system were determined. Accurate power system data are necessary for tuning the control algorithm so that the SMES unit can operate in the closed loop stabilizer mode.

Rogers, J.D.; Boenig, H.J.

1984-08-01T23:59:59.000Z

76

Storage | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storage Storage Storage Energy storage isn’t just for AA batteries. Thanks to investments from the Energy Department's Advanced Research Projects Agency-Energy (ARPA-E), energy storage may soon play a bigger part in our electricity grid, making it possible to generate more renewable electricity. Learn more. Energy storage isn't just for AA batteries. Thanks to investments from the Energy Department's Advanced Research Projects Agency-Energy (ARPA-E), energy storage may soon play a bigger part in our electricity grid, making it possible to generate more renewable electricity. Learn more.

77

30-MJ superconducting magnetic-energy-storage stabilizing system: an overview  

DOE Green Energy (OSTI)

The 30-MJ superconducting magnetic-energy-storage (SMES) system was devised as an alternate means to modulate the Bonneville Power Administration (BPA) Pacific AC Intertie, a part of the Western US Power System, to prevent undamped power oscillations at 0.35 Hz that were observed to be associated with high power transmission. The SMES system was installed at the BPA Tacoma Substation and successfully operated as an experimental device to initiate tests to determine power system dynamics, to investigate their variability, to assess system response to SMES modulation with a major variable load, and to use SMES to develop stability-control techniques. The system has been operated at frequencies of 0.1 to 1.0 Hz at power levels of +- 8.3 MW with a parallel modulation of the converter bridges and up to 9.5 MW reactive power together with +- 4.5 MW real power in constant VAR mode with buck-boost modulation of the bridges. The coil has been charged at a maximum rate of 11.8 MW. Operation of the SMES system is now under BPA jurisdiction, and all hardware has been transferred to BPA.

Roger, J.D.; Boenig, H.J.; Dean, J.W.; Schermer, R.I.; Annestrand, S.A.; Hauer, J.F.; Miller, B.L.

1983-01-01T23:59:59.000Z

78

1-GWh diurnal load-leveling Superconducting Magnetic Energy Storage system reference design  

DOE Green Energy (OSTI)

A point reference design has been completed for a 1-GWh Superconducting Magnetic Energy Storage system. The system is for electric utility diurnal load-leveling but can also function to meet much faster power demands including dynamic stabilization. This study explores several concepts of design not previously considered in the same detail as treated here. Because the study is for a point design, optimization in all respects is not complete. This report examines aspects of the coil, the superconductor supported off of the dewar shell, the dewar shell, and its configuration and stresses, the underground excavation and construction for holding the superconducting coil and its dewar, the helium refrigeration system, the electrical converter system, the vacuum system, the guard coil, and the costs. This report is divided into two major portions. The first is a general treatment of the work and the second is seven detailed technical appendices issued as separate reports. The information presented on the aluminum stabilizer for the conductor, on the excavation, and on the converter is based upon industrial studies contracted for this work.

Rogers, J.D.; Hassenzahl, W.V.; Schermer, R.I. (comps.)

1979-09-01T23:59:59.000Z

79

Superconducting magnetic energy storage (SMES) program. Progress report, January 1-December 31, 1982  

SciTech Connect

Work reported is on the development of a 30 MJ superconducting magnetic energy storage (SMES) unit, its installation at the Bonneville Power Administration (BPA) Tacoma Substation, and the preliminary site tests in preparation for its use to stabilize power oscillations on the BPA Pacific AC Inertie. The seismic mounting of the 30 MJ superconducting coil to the dewar lid was completed. The manufacture and testing of the nonconducting dewar were completed. The 5 kV vapor cooled leads were assembled and tested. The refrigerator was placed in operation at the Tacoma Substation and tested by making liquid helium in a 500 l dewar. The refrigerator was connected to the coil dewar and is now used for cooling the 30 MJ coil and dewar with extended purification of the circulating helium to remove contaminants. All equipment was shipped and installed at the BPA Tacoma Substation. Assembly of the 30 MJ coil into the nonconducting dewar was done at the BPA Covington facility and transported to the Tacoma Substation. Substation preparation was completed by 11-1-82. BPA, at considerable expense, did an excellent job preparing the site and assisting with the SMES unit installation. All equipment is in place and operable except for components of the computer control and for full refrigeration of the 30 MJ coil. The converter was tested with the output shorted with the input transformers connected to the 13.8 kV. A new schedule for the SMES operation was established.

Rogers, J.D. (comp.)

1983-05-01T23:59:59.000Z

80

Superconducting magnetic energy storage (SMES) program. Progress report, January 1-December 31, 1984  

DOE Green Energy (OSTI)

The 30 MJ, 10 MW superconducting magnetic energy storage (SMES) system was devised to interact in the Western US Power System as an alternate means to damp unstable oscillations at 0.35 Hz on the Pacific HVAC Intertie. The SMES unit was installed at the Tacoma Substation of the Bonneville Power Administration (BPA). The operating limits of the 30 MJ SMES unit were established, and different means of controlling real and reactive power were tested. The unit can follow a sinusoidal power demand signal with an amplitude of up to 8.6 MW with the converter working in a 12 pulse mode. When the converter operates in the constant VAR mode, a time varying real power demand signal of up to 5 MW can be met. Experiments showed that the Pacific ac Intertie has current and reactive power variations of the same frequency as the modulating frequency of the SMES device. Endurance tests were run to assess the reliability of the SMES subsystems with a narrow band noise input, which is characteristic of the modulation signal for stabilizer operation. During the endurance tests, parameters of the ac power system were determined. Converter short circuit tests, load tests under various control conditions, dc breaker tests for coil current interruption, and converter failure mode tests were conducted. The experimental operation of the SMES system was concluded and the operation was terminated in early 1984.

Rogers, J.D. (comp.)

1985-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Design of Flywheel Energy Storage Structure  

Science Conference Proceedings (OSTI)

In this paper, we have mainly studied the flywheel energy storage system's construction and working principle, which include flywheel battery, integrated driven converting motor (Device of energy converter), and magnetic suspension support system. We ... Keywords: Flywheel principle, Flywheel energy storage, Energy transudcer, Application of flywheel storage

Baoquan Geng; Yiming He

2011-03-01T23:59:59.000Z

82

Vehicle Technologies Office: Energy Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage to someone by E-mail Share Vehicle Technologies Office: Energy Storage on Facebook Tweet about Vehicle Technologies Office: Energy Storage on Twitter Bookmark...

83

NREL: Energy Storage - News  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage News Below are news stories related to NREL's energy storage research. August 28, 2013 NREL Battery Calorimeters Win R&D 100 Award The award-wining Isothermal...

84

LARGE SUPERCONDUCTING DETECTOR MAGNETS WITH ULTRA THIN COILS FOR USE IN HIGH ENERGY ACCELERATORS AND STORAGE RINGS  

E-Print Network (OSTI)

contained 890 kJ of magnetic energy,:and i t iia:~ ,operat:as a functiori of stored· magnetic energy' for a number ofabsorbs a portion of the magnetic energy in the process. The

Green, M.A.

2010-01-01T23:59:59.000Z

85

Energy Storage & Delivery  

Science Conference Proceedings (OSTI)

Energy Storage & Delivery. Summary: Schematic of Membrane Molecular Structure The goal of the project is to develop ...

2013-07-23T23:59:59.000Z

86

NREL: Energy Storage - Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Resources The National Renewable Energy Laboratory's (NREL) Energy Storage team and partners work within a variety of programs that have created test manuals to establish standard...

87

Energy Storage | Open Energy Information  

Open Energy Info (EERE)

Storage Storage Jump to: navigation, search TODO: Source information Contents 1 Introduction 2 Benefits 3 Technologies 4 References Introduction Energy storage is a tool that can be used by grid operators to help regulate the electrical grid and help meet demand. In its most basic form, energy storage "stores" excess energy that would otherwise be wasted so that it can be used later when demand is higher. Energy Storage can be used to balance microgrids, perform frequency regulation, and provide more reliable power for high tech industrial facilities.[1] Energy storage will also allow for the expansion of intermittent renewable energy, like wind and solar, to provide electricity around the clock. Some of the major issues concerning energy storage include cost, efficiency, and size.

88

HEATS: Thermal Energy Storage  

SciTech Connect

HEATS Project: The 15 projects that make up ARPA-E’s HEATS program, short for “High Energy Advanced Thermal Storage,” seek to develop revolutionary, cost-effective ways to store thermal energy. HEATS focuses on 3 specific areas: 1) developing high-temperature solar thermal energy storage capable of cost-effectively delivering electricity around the clock and thermal energy storage for nuclear power plants capable of cost-effectively meeting peak demand, 2) creating synthetic fuel efficiently from sunlight by converting sunlight into heat, and 3) using thermal energy storage to improve the driving range of electric vehicles (EVs) and also enable thermal management of internal combustion engine vehicles.

None

2012-01-01T23:59:59.000Z

89

Hydrogen-based electrochemical energy storage - Energy ...  

An energy storage device (100) providing high storage densities via hydrogen storage. The device (100) includes a counter electrode (110), a storage ...

90

Flywheel energy storage workshop  

DOE Green Energy (OSTI)

Since the November 1993 Flywheel Workshop, there has been a major surge of interest in Flywheel Energy Storage. Numerous flywheel programs have been funded by the Advanced Research Projects Agency (ARPA), by the Department of Energy (DOE) through the Hybrid Vehicle Program, and by private investment. Several new prototype systems have been built and are being tested. The operational performance characteristics of flywheel energy storage are being recognized as attractive for a number of potential applications. Programs are underway to develop flywheels for cars, buses, boats, trains, satellites, and for electric utility applications such as power quality, uninterruptible power supplies, and load leveling. With the tremendous amount of flywheel activity during the last two years, this workshop should again provide an excellent opportunity for presentation of new information. This workshop is jointly sponsored by ARPA and DOE to provide a review of the status of current flywheel programs and to provide a forum for presentation of new flywheel technology. Technology areas of interest include flywheel applications, flywheel systems, design, materials, fabrication, assembly, safety & containment, ball bearings, magnetic bearings, motor/generators, power electronics, mounting systems, test procedures, and systems integration. Information from the workshop will help guide ARPA & DOE planning for future flywheel programs. This document is comprised of detailed viewgraphs.

O`Kain, D.; Carmack, J. [comps.

1995-12-31T23:59:59.000Z

91

Energy Storage Systems 2007 Peer Review - International Energy Storage  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

International Energy International Energy Storage Program Presentations Energy Storage Systems 2007 Peer Review - International Energy Storage Program Presentations The U.S. DOE Energy Storage Systems Program (ESS) held an annual peer review on September 27, 2007 in San Francisco, CA. Eighteen presentations were divided into categories; those related to international energy storage programs are below. Other presentation categories were: Economics - Benefit Studies and Environment Benefit Studies Utility & Commercial Applications of Advanced Energy Storage Systems Power Electronics Innovations in Energy Storage Systems ESS 2007 Peer Review - DOE-CEC Energy Storage Program FY07 Projects - Daniel Borneo, SNL.pdf ESS 2007 Peer Review - Joint NYSERDA-DOE Energy Storage Initiative Projects

92

Understanding Superconducting Magnetic Energy Storage (SMES) technology, applications, and economics, for end-use workshop  

DOE Green Energy (OSTI)

The overall objective of this project was to determine the state-of-the-art and to what extent existing SMES is a viable option in meeting the needs of utilities and their customers for improving electric service power quality. By defining and analyzing SMES electrical/mechanical performance characteristics, and comparing SMES application benefits with competitive stored energy systems, industry will be able to determine SMES unique applications and potential market penetration. Building on this information base, it would also be possible to evaluate the impact of high temperature superconductors (77 K and 20-35 K) on SMES technology applications. The authors of this report constructed a network of industry contacts and research consultants that were used to collect, update, and analyze ongoing SMES R&D and marketing activities in industries, utilities, and equipment manufacturers. These key resources were utilized to assemble performance characteristics on existing SMES, battery, capacitor, flywheel, and high temperature superconductor (HTS) stored energy technologies. From this information, preliminary stored energy system comparisons were accomplished. In this way, the electric load needs would be readily comparable to the potential solutions and applications offered by each aforementioned energy storage technology.

Ferraro, R.J. [Ferraro, Oliver, and Associates, Inc., Knoxville, TN (United States); McConnell, B.W. [Oak Ridge National Lab., TN (United States)

1993-06-01T23:59:59.000Z

93

NREL: Energy Storage - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

to reply. Your name: Your email address: Your message: Send Message Printable Version Energy Storage Home About the Project Technology Basics Research & Development Awards &...

94

Advanced Energy Storage Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Energy Storage Publications Reports: Advanced Technology Development Program For Lithium-Ion Batteries: Gen 2 Performance Evaluation Final Report Advanced Technology...

95

Operation of the 30 MJ superconducting magnetic energy storage system in the Bonneville Power Administration Electrical Grid  

DOE Green Energy (OSTI)

The 30 MJ superconducting magnetic energy storage (SMES) system was installed in the Bonneville Power Administration (BPA) Tacoma Substation in 1982 to 1983. Operation of the unit since that time has been for over 1200 hours. Specific tests to explore the SMES system's thermal and electrical characteristics and the control functions were conducted. The coil heat load with current modulation was determined. A converter with two 6-pulse bridges interfaces the superconducting coil to the power bus. Equal bridge voltage amplitude and constant reactive power modes of operation of the system were run with computer control of the SCR bridge firing angles. Coil energy dump tests were performed. Electrical grid system response to SMES modulation was observed, and full power SMES modulation was undertaken.

Rogers, J.D.; Boenig, H.J.; Schermer, R.I.; Hauer, J.F.

1984-01-01T23:59:59.000Z

96

Operation of the 30 MJ superconducting magnetic energy storage system in the Bonneville Power Administration Electrical Grid  

SciTech Connect

The 30 MJ superconducting magnetic energy storage (SMES) system was installed in the Bonneville Power Administration (BPA) Tacoma Substation in 1982 to 1983. Operation of the unit since that time has been for over 1200 hours. Specific tests to explore the SMES system's thermal and electrical characteristics and the control functions were conducted. The coil heat load with current modulation was determined. A converter with two 6-pulse bridges interfaces the superconducting coil to the power bus. Equal bridge voltage amplitude and constant reactive power modes of operation of the system were run with computer control of the SCR bridge firing angles. Coil energy dump tests were performed. Electrical grid system response to SMES modulation was observed, and full power SMES modulation was undertaken.

Rogers, J.D.; Boenig, H.J.; Schermer, R.I.; Hauer, J.F.

1984-01-01T23:59:59.000Z

97

Superconducting magnetic energy storage applications and benefits for electric utility power systems  

DOE Green Energy (OSTI)

Large SMES units are being studied for electric utility applications as diurnal, load-curve leveling and as transient stabilizer units. Such SMES units show promise of providing greater operating flexibility than pumped-hydro or other types of energy storage. This operating flexibility, together with its fast response capability to provide transient and dynamic stabilization benefits to a power system, are discussed. Small SMES units are being designed for dynamic stability applications on electric power systems for use when negatively damped system operating conditions are encountered. The 30-MJ, 10-MW SMES dynamic-stabilizer design is presented; and the status of the component development and fabrication contracts which have been placed with commercial manufacturers is discussed.

Turner, R.D.

1979-01-01T23:59:59.000Z

98

Thermal Energy Storage  

Science Conference Proceedings (OSTI)

This Technology Brief provides an update on the current state of cool thermal energy storage systems (TES) for end-use applications. Because of its ability to shape energy use, TES is strategic technology that allows end-users to reduce their energy costs while simultaneously providing benefits for electric utilities through persistent peak demand reduction and peak shifting. In addition to discussing the concepts of thermal energy storage, the Brief discusses the current state of TES technologies and dr...

2008-12-16T23:59:59.000Z

99

Design and testing of a 13. 75-MW converter for a superconducting magnetic-energy-storage system  

DOE Green Energy (OSTI)

A 30 MJ superconducting magnetic energy storage system will be installed in 1982 in Tacoma, WA, to act as a transmission line stabilizer. Two 6 MVA transformers and a 5.5 kA, + 2.5 kV converter will connect the superconducting coil to the 13.8 kV bus and regulate the power flow between the coil and the three phase system. The design philosophy for the converter including its control and protection system is given in the paper. The converter has been tested with 10% overvoltage at no load, with 10% overcurrent at zero output voltage and with a watercooled resistive load of about 1 MW. These test results show that the converter will meet the expected full load operating conditions.

Boenig, H.J.; Turner, R.D.; Neft, C.L.; Sueker, K.H.

1981-01-01T23:59:59.000Z

100

NREL: Energy Storage - Industry Participants  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry Participants NREL's energy storage project is funded by the DOE's Vehicle Technologies Office. We work closely with automobile manufacturers, energy storage developers,...

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Energy storage capacitors  

DOE Green Energy (OSTI)

The properties of capacitors are reviewed in general, including dielectrics, induced polarization, and permanent polarization. Then capacitance characteristics are discussed and modelled. These include temperature range, voltage, equivalent series resistance, capacitive reactance, impedance, dissipation factor, humidity and frequency effects, storage temperature and time, and lifetime. Applications of energy storage capacitors are then discussed. (LEW)

Sarjeant, W.J.

1984-01-01T23:59:59.000Z

102

DRAFT "Energy Advisory Committee" - Energy Storage Subcommittee...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report: Revision 2 DRAFT "Energy Advisory Committee" - Energy Storage Subcommittee Report: Revision 2 Energy storage plays a vital role in all forms of business and affects the...

103

Energy Storage Technologies Available for Licensing - Energy ...  

Energy Storage Technologies Available for Licensing U.S. Department of Energy laboratories and participating research institutions have energy storage technologies ...

104

SERI Solar Energy Storage Program  

DOE Green Energy (OSTI)

The SERI Solar Energy Storage Program provides research on advanced technologies, system analyses, and assessments of thermal energy storage for solar applications in support of the Thermal and Chemical Energy Storage Program of the DOE Division of Energy Storage Systems. Currently, research is in progress on direct contact latent heat storage and thermochemical energy storage and transport. Systems analyses are being performed of thermal energy storage for solar thermal applications, and surveys and assessments are being prepared of thermal energy storage in solar applications.

Copeland, R. J.; Wright, J. D.; Wyman, C. E.

1980-02-01T23:59:59.000Z

105

Magnetic Materials for Energy Applications -III  

Science Conference Proceedings (OSTI)

TMS: Energy Committee TMS: Energy Conversion and Storage Committee ... Optimization of the Mechanical Alloying Process of Soft Magnetic Fe-Based ...

106

Energy Storage | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage Energy Storage Energy Storage One of the distinctive characteristics of the electric power sector is that the amount of electricity that can be generated is relatively fixed over short periods of time, although demand for electricity fluctuates throughout the day. Developing technology to store electrical energy so it can be available to meet demand whenever needed would represent a major breakthrough in electricity distribution. Helping to try and meet this goal, electricity storage devices can manage the amount of power required to supply customers at times when need is greatest, which is during peak load. These devices can also help make renewable energy, whose power output cannot be controlled by grid operators, smooth and dispatchable. They can also balance microgrids to achieve a good match between generation

107

Energy Conversion, Storage, and Transport News  

Science Conference Proceedings (OSTI)

NIST Home > Energy Conversion, Storage, and Transport News. Energy Conversion, Storage, and Transport News. (showing ...

2010-10-26T23:59:59.000Z

108

Energy Conversion, Storage, and Transport Portal  

Science Conference Proceedings (OSTI)

NIST Home > Energy Conversion, Storage, and Transport Portal. Energy Conversion, Storage, and Transport Portal. Programs ...

2013-04-08T23:59:59.000Z

109

A Novel Integrated Magnetic Structure Based DC/DC Converter for Hybrid Battery/Ultracapacitor Energy Storage Systems  

Science Conference Proceedings (OSTI)

This manuscript focuses on a novel actively controlled hybrid magnetic battery/ultracapacitor based energy storage system (ESS) for vehicular propulsion systems. A stand-alone battery system might not be sufficient to satisfy peak power demand and transient load variations in hybrid and plug-in hybrid electric vehicles (HEV, PHEV). Active battery/ultracapacitor hybrid ESS provides a better solution in terms of efficient power management and control flexibility. Moreover, the voltage of the battery pack can be selected to be different than that of the ultracapacitor, which will result in flexibility of design as well as cost and size reduction of the battery pack. In addition, the ultracapacitor bank can supply or recapture a large burst of power and it can be used with high C-rates. Hence, the battery is not subjected to supply peak and sharp power variations, and the stress on the battery will be reduced and the battery lifetime would be increased. Utilizing ultracapacitor results in effective capturing of the braking energy, especially in sudden braking conditions.

Onar, Omer C [ORNL

2012-01-01T23:59:59.000Z

110

Energy Storage Computational Tool | Open Energy Information  

Open Energy Info (EERE)

Energy Storage Computational Tool Energy Storage Computational Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Storage Computational Tool Agency/Company /Organization: Navigant Consulting Sector: Energy Focus Area: Grid Assessment and Integration Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.smartgrid.gov/recovery_act/program_impacts/energy_storage_computat Country: United States Web Application Link: www.smartgrid.gov/recovery_act/program_impacts/energy_storage_computat Cost: Free Northern America Language: English Energy Storage Computational Tool Screenshot References: Energy Storage Computational Tool[1] SmartGrid.gov[2] Logo: Energy Storage Computational Tool This tool is used for identifying, quantifying, and monetizing the benefits

111

Thermal Energy Storage  

Science Conference Proceedings (OSTI)

The Ice Bear30 Hybrid Air Conditionerthermal energy storage system150uses smart integrated controls, ice storage, and a dedicated compressor for cooling. The system is designed to provide cooling to interior spaces by circulating refrigerant within an additional evaporator coil added to a standard unitary air conditioner. The Ice Bear 30 is a relatively small size (5 ton), intended for use in residential and light commercial applications. This report describes EPRI tests of the Ice Bear 30, which is manu...

2009-12-14T23:59:59.000Z

112

Hybrid electrical energy storage systems  

Science Conference Proceedings (OSTI)

Electrical energy is a high quality form of energy that can be easily converted to other forms of energy with high efficiency and, even more importantly, it can be used to control lower grades of energy quality with ease. However, building a cost-effective ... Keywords: charge, electrical storage, energy, energy storage, hybrid storage, management

Massoud Pedram; Naehyuck Chang; Younghyun Kim; Yanzhi Wang

2010-08-01T23:59:59.000Z

113

Energy Storage Technologies - Energy Innovation Portal  

Energy Storage Technology Marketing Summaries Here you’ll find marketing summaries of energy storage technologies available for licensing from U.S. Department of ...

114

Energy Storage Technologies - Energy Innovation Portal  

Energy Storage Technology Marketing Summaries Here you’ll find marketing summaries of energy storage technologies available for licensing from U.S. ...

115

Inertial energy storage device  

DOE Patents (OSTI)

The inertial energy storage device of the present invention comprises a composite ring formed of circumferentially wound resin-impregnated filament material, a flanged hollow metal hub concentrically disposed in the ring, and a plurality of discrete filament bandsets coupling the hub to the ring. Each bandset is formed of a pair of parallel bands affixed to the hub in a spaced apart relationship with the axis of rotation of the hub being disposed between the bands and with each band being in the configuration of a hoop extending about the ring along a chordal plane thereof. The bandsets are disposed in an angular relationship with one another so as to encircle the ring at spaced-apart circumferential locations while being disposed in an overlapping relationship on the flanges of the hub. The energy storage device of the present invention has the capability of substantial energy storage due to the relationship of the filament bands to the ring and the flanged hub.

Knight, Jr., Charles E. (Knoxville, TN); Kelly, James J. (Oak Ridge, TN); Pollard, Roy E. (Powell, TN)

1978-01-01T23:59:59.000Z

116

Electrochemical Energy Storage for the Grid | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electrochemical Energy Storage for the Grid Electrochemical Energy Storage for the Grid Electrochemical Energy Storage for the Grid Electrochemical Energy Storage for the Grid More...

117

Energy Storage Systems 2007 Peer Review - International Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

International Energy Storage Program Presentations Energy Storage Systems 2007 Peer Review - International Energy Storage Program Presentations The U.S. DOE Energy Storage Systems...

118

Thermal energy storage material  

DOE Patents (OSTI)

A thermal energy storage material which is stable at atmospheric temperature and pressure and has a melting point higher than 32.degree.F. is prepared by dissolving a specific class of clathrate forming compounds, such as tetra n-propyl or tetra n-butyl ammonium fluoride, in water to form a substantially solid clathrate. The resultant thermal energy storage material is capable of absorbing heat from or releasing heat to a given region as it transforms between solid and liquid states in response to temperature changes in the region above and below its melting point.

Leifer, Leslie (Hancock, MI)

1976-01-01T23:59:59.000Z

119

Pneumatic energy storage  

DOE Green Energy (OSTI)

An essential component to hybrid electric and electric vehicles is energy storage. A power assist device could also be important to many vehicle applications. This discussion focuses on the use of compressed gas as a system for energy storage and power in vehicle systems. Three possible vehicular applications for which these system could be used are discussed in this paper. These applications are pneumatically driven vehicles, series hybrid electric vehicles, and power boost for electric and conventional vehicles. One option for a compressed gas system is as a long duration power output device for purely pneumatic and hybrid cars. This system must provide enough power and energy to drive under normal conditions for a specified time or distance. The energy storage system for this use has the requirement that it will be highly efficient, compact, and have low mass. Use of a compressed gas energy storage as a short duration, high power output system for conventional motor vehicles could reduce engine size or reduce transient emissions. For electric vehicles this kind of system could lengthen battery life by providing battery load leveling during accelerations. The system requirements for this application are that it be compact and have low mass. The efficiency of the system is a secondary consideration in this application.

Flowers, D.

1995-09-19T23:59:59.000Z

120

Ultra high-current superconducting cables for a 2. 2-Tesla, 300-kilojoule energy storage magnet  

DOE Green Energy (OSTI)

These 2.2-T, 300-kJ magnets are to operate at 10 to 12 kA with a safety factor in critical current of about 50 percent at 10 kA. The conductor must exhibit low losses in addition to being stable. Magnetic Corporation of America (MCA) designed a flat conductor using 1224 copper-matrix, monofilament wires combined in two stages of cabling followed by two stages of flat braiding. Two of these conductors were constructed, one with wire already on hand and the second using wire made specifically for this application. Intermagnetics General Corporation (IGC) designed two rectangular conductors using 315 and 319 mixed-matrix multifilament wires combined in three stages of cabling followed by compaction in a Turk's head. The maximum transport current capabilities (I/sub t/) of these cables were measured in hairpin shaped samples with the straight section under test in perpendicularly applied fields. The measured results at 2.5 T for the two MCA cables were 11.7 kA and 15.4 kA, and for the IGC cables were 18.2 kA and 19.3 kA (extrapolated). In addition, samples of the compacted and uncompacted major strands from the IGC cables were tested. The results of these measurements are compred with values of I/sub t/ from the single-wire critical currents taking into account the adjacent conductor fields and the cable self-fields.Several causes of degradation of I/sub t/ in the compacted cable are discussed including those due to experimental factors.

Miranda, G.A.; Rhodenizer, R.; Rackov, P.; Punchard, W.F.B.; de Winter, T.A.

1976-08-17T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Energy Storage: Current landscape for alternative energy  

E-Print Network (OSTI)

Energy Storage: Current landscape for alternative energy storage technologies and what the future may hold for multi-scale storage applications Presented by: Dave Lucero, Director Alternative Energy · Industry initiatives · Technology · Energy Storage Market · EaglePicher initiatives · Summary #12

122

Energy Storage Technologies Available for Licensing ...  

Energy Storage Technologies Available for Licensing U.S. Department of Energy laboratories and participating research institutions have energy storage ...

123

Advanced Energy Technologies: Solar Energy and Storage  

Science Conference Proceedings (OSTI)

Advanced Energy Technologies: Solar Energy and Storage (+18 FTE, +$7,500,000). image: Shutterstock, copyright Chayne Gregg. Challenge. ...

2011-10-11T23:59:59.000Z

124

Carbon-based Materials for Energy Storage  

E-Print Network (OSTI)

Flexible, lightweight energy-storage devices are of greatstrategy to fabricate flexible energy-storage devices.Flexible, lightweight energy-storage devices (batteries and

Rice, Lynn Margaret

2012-01-01T23:59:59.000Z

125

AQUIFER THERMAL ENERGY STORAGE-A SURVEY  

E-Print Network (OSTI)

High temperature underground thermal energy storage, inProceedings, Thermal Energy Storage in Aquifers Workshop:underground thermal energy storage, in ATES newsletter:

Tsang, Chin Fu

2012-01-01T23:59:59.000Z

126

Nanostructured Materials for Energy Generation and Storage  

E-Print Network (OSTI)

for Electrochemical Energy Storage Nanostructured Electrodesof Electrode Design for Energy Storage and Generation .batteries and their energy storage efficiency. vii Contents

Khan, Javed Miller

2012-01-01T23:59:59.000Z

127

Energy Storage Demonstration Project Locations | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Demonstration Project Locations Energy Storage Demonstration Project Locations Map of the United States showing the location of Energy Storage Demonstration projects...

128

THERMAL ENERGY STORAGE IN AQUIFERS WORKSHOP  

E-Print Network (OSTI)

Survey of Thermal Energy Storage in Aquifers Coupled withGeneration and Energy Storage," presented at Frontiers ofStudy of Underground Energy Storage Using High-Pressure,

Authors, Various

2011-01-01T23:59:59.000Z

129

AQUIFER THERMAL ENERGY STORAGE-A SURVEY  

E-Print Network (OSTI)

1978, High temperature underground thermal energy storage,in Proceedings, Thermal Energy Storage in Aquifers Workshop:High temperature underground thermal energy storage, in ATES

Tsang, Chin Fu

2012-01-01T23:59:59.000Z

130

THERMAL ENERGY STORAGE IN AQUIFERS WORKSHOP  

E-Print Network (OSTI)

B. Quale. Seasonal storage of thermal energy in water in theand J. Schwarz, Survey of Thermal Energy Storage in AquifersSecond Annual Thermal Energy Storage Contractors'

Authors, Various

2011-01-01T23:59:59.000Z

131

Thermal energy storage application areas  

DOE Green Energy (OSTI)

The use of thermal energy storage in the areas of building heating and cooling, recovery of industrial process and waste heat, solar power generation, and off-peak energy storage and load management in electric utilities is reviewed. (TFD)

Not Available

1979-03-01T23:59:59.000Z

132

Part II Energy Storage Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

II. Energy Storage Technology Overview * Instructor - Haresh Kamath, EPRI PEAC * Short term - Flywheels, Cranking Batteries, Electrochemical Capacitors, SMES * Long term -...

133

Energy Storage & Power Electronics 2008 Peer Review - Energy Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

& Power Electronics 2008 Peer Review - Energy & Power Electronics 2008 Peer Review - Energy Storage Systems (ESS) Presentations Energy Storage & Power Electronics 2008 Peer Review - Energy Storage Systems (ESS) Presentations The 2008 Peer Review Meeting for the DOE Energy Storage and Power Electronics Program (ESPE) was held in Washington DC on Sept. 29-30, 2008. Current and completed program projects were presented and reviewed by a group of industry professionals. The 2008 agenda was composed of 28 projects that covered a broad range of new and ongoing, state-of-the-art, energy storage and power electronics technologies, including updates on the collaborations among DOE/ESPE, CEC in California, and NYSERDA in New York. Energy Storage Systems (ESS) presentations are available below. ESPE 2008 Peer Review - EAC Energy Storage Subcommittee - Brad Roberts, S&C

134

Flywheel Energy Storage technology workshop  

DOE Green Energy (OSTI)

Advances in recent years of high strength/lightweight materials, high performance magnetic bearings, and power electronics technology has spurred a renewed interest by the transportation, utility, and manufacturing industries in Flywheel Energy Storage (FES) technologies. FES offers several advantages over conventional electro-chemical energy storage, such as high specific energy and specific power, fast charging time, long service life, high turnaround efficiency (energy out/energy in), and no hazardous/toxic materials or chemicals are involved. Potential applications of FES units include power supplies for hybrid and electric vehicles, electric vehicle charging stations, space systems, and pulsed power devices. Also, FES units can be used for utility load leveling, uninterruptable power supplies to protect electronic equipment and electrical machinery, and for intermittent wind or photovoltaic energy sources. The purpose of this workshop is to provide a forum to highlight technologies that offer a high potential to increase the performance of FES systems and to discuss potential solutions to overcome present FES application barriers. This document consists of viewgraphs from 27 presentations.

O`Kain, D.; Howell, D. [comps.

1993-12-31T23:59:59.000Z

135

Maui energy storage study.  

SciTech Connect

This report investigates strategies to mitigate anticipated wind energy curtailment on Maui, with a focus on grid-level energy storage technology. The study team developed an hourly production cost model of the Maui Electric Company (MECO) system, with an expected 72 MW of wind generation and 15 MW of distributed photovoltaic (PV) generation in 2015, and used this model to investigate strategies that mitigate wind energy curtailment. It was found that storage projects can reduce both wind curtailment and the annual cost of producing power, and can do so in a cost-effective manner. Most of the savings achieved in these scenarios are not from replacing constant-cost diesel-fired generation with wind generation. Instead, the savings are achieved by the more efficient operation of the conventional units of the system. Using additional storage for spinning reserve enables the system to decrease the amount of spinning reserve provided by single-cycle units. This decreases the amount of generation from these units, which are often operated at their least efficient point (at minimum load). At the same time, the amount of spinning reserve from the efficient combined-cycle units also decreases, allowing these units to operate at higher, more efficient levels.

Ellison, James; Bhatnagar, Dhruv; Karlson, Benjamin

2012-12-01T23:59:59.000Z

136

Grid Applications for Energy Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

Applications for Energy Storage Applications for Energy Storage Flow Cells for Energy Storage Workshop Washington DC 7-8 March 2012 Joe Eto jheto@lbl.gov (510) 486-7284 Referencing a Recent Sandia Study,* This Talk Will: Describe and illustrate selected grid applications for energy storage Time-of-use energy cost management Demand charge management Load following Area Regulation Renewables energy time shift Renewables capacity firming Compare Sandia's estimates of the economic value of these applications to the Electricity Storage Association's estimates of the capital costs of energy storage technologies *Eyer, J. and G. Corey. Energy Storage for the Electricity Grid: Benefits and Market Potential Assessment Guide. February 2010. SAND2010-0815 A Recent Sandia Study Estimates the Economic

137

Nanoarchitecture Electrodes for Energy Storage  

Science Conference Proceedings (OSTI)

New materials such as Si nanowires anodes and high-energy layered-layered composite cathode materials have increased the energy storage, but are low in ...

138

Fact Sheet: Energy Storage Technology Advancement Partnership...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fact Sheet: Energy Storage Technology Advancement Partnership (October 2012) More Documents & Publications Webinar Presentation: Energy Storage Solutions for Microgrids (November...

139

Transportable Energy Storage Systems Project  

Science Conference Proceedings (OSTI)

This project will define the requirements and specification for a transportable energy storage system and then screen various energy storage options and assess their capability to meet that specification. The application will be designed to meet peak electrical loads (3-4 hours of storage) on the electrical distribution system.

2009-10-23T23:59:59.000Z

140

Energy Storage Laboratory (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Energy Storage Laboratory at the Energy Systems Integration Facility. At NREL's Energy Storage Laboratory in the Energy Systems Integration Facility (ESIF), research focuses on the integration of energy storage systems (both stationary and vehicle-mounted) and interconnection with the utility grid. Focusing on battery technologies, but also hosting ultra-capacitors and other electrical energy storage technologies, the laboratory will provide all resources necessary to develop, test, and prove energy storage system performance and compatibility with distributed energy systems. The laboratory will also provide robust vehicle testing capability, including a drive-in environmental chamber, which can accommodate commercial-sized hybrid, electric, biodiesel, ethanol, compressed natural gas, and hydrogen fueled vehicles. The Energy Storage Laboratory is designed to ensure personnel and equipment safety when testing hazardous battery systems or other energy storage technologies. Closely coupled with the research electrical distribution bus at ESIF, the Energy Storage Laboratory will offer megawatt-scale power testing capability as well as advanced hardware-in-the-loop and model-in-the-loop simulation capabilities. Some application scenarios are: The following types of tests - Performance, Efficiency, Safety, Model validation, and Long duration reliability. (2) Performed on the following equipment types - (a) Vehicle batteries (both charging and discharging V2G); (b) Stationary batteries; (c) power conversion equipment for energy storage; (d) ultra- and super-capacitor systems; and (e) DC systems, such as commercial microgrids.

Not Available

2011-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Article for thermal energy storage  

DOE Patents (OSTI)

A thermal energy storage composition is provided which is in the form of a gel. The composition includes a phase change material and silica particles, where the phase change material may comprise a linear alkyl hydrocarbon, water/urea, or water. The thermal energy storage composition has a high thermal conductivity, high thermal energy storage, and may be used in a variety of applications such as in thermal shipping containers and gel packs.

Salyer, Ival O. (Dayton, OH)

2000-06-27T23:59:59.000Z

142

Breakthrough Materials for Energy Storage  

Title: Breakthrough Materials for Energy Storage Subject: A presentation at the 22nd NREL Industry Growth Forum by Amprius about its lithium ion battery technology

143

NREL: Energy Storage - Technology Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Basics Photo of an ultracapacitor. Electrochemical energy storage devices provide the power for many everyday devices-from cars, trains, and laptops to personal digital...

144

Energy storage in carbon nanoparticles.  

E-Print Network (OSTI)

??Hydrogen (H2) and methane (CH4) are clean energy sources, and their storage in carbonaceous materials is a promising technology for safe and cost effective usage… (more)

Guan, Cong.

2009-01-01T23:59:59.000Z

145

Energy Storage & Power Electronics 2008 Peer Review - Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Systems (ESS) Presentations Energy Storage & Power Electronics 2008 Peer Review - Energy Storage Systems (ESS) Presentations The 2008 Peer Review Meeting for the...

146

NV Energy Electricity Storage Valuation  

SciTech Connect

This study examines how grid-level electricity storage may benet the operations of NV Energy in 2020, and assesses whether those benets justify the cost of the storage system. In order to determine how grid-level storage might impact NV Energy, an hourly production cost model of the Nevada Balancing Authority (\\BA") as projected for 2020 was built and used for the study. Storage facilities were found to add value primarily by providing reserve. Value provided by the provision of time-of-day shifting was found to be limited. If regulating reserve from storage is valued the same as that from slower ramp rate resources, then it appears that a reciprocating engine generator could provide additional capacity at a lower cost than a pumped storage hydro plant or large storage capacity battery system. In addition, a 25-MW battery storage facility would need to cost $650/kW or less in order to produce a positive Net Present Value (NPV). However, if regulating reserve provided by storage is considered to be more useful to the grid than that from slower ramp rate resources, then a grid-level storage facility may have a positive NPV even at today's storage system capital costs. The value of having storage provide services beyond reserve and time-of-day shifting was not assessed in this study, and was therefore not included in storage cost-benefit calculations.

Ellison, James F.; Bhatnagar, Dhruv; Samaan, Nader A.; Jin, Chunlian

2013-06-30T23:59:59.000Z

147

Spin rotation and birefringence effect for a particle in a high energy storage ring and measurement of the real part of the coherent elastic zero-angle scattering amplitude, electric and magnetic polarizabilities  

E-Print Network (OSTI)

In the present paper the equations for the spin evolution of a particle in a storage ring are analyzed considering contributions from the tensor electric and magnetic polarizabilities of the particle. Study of spin rotation and birefringence effect for a particle in a high energy storage ring provides for measurement as the real part of the coherent elastic zero-angle scattering amplitude as well as tensor electric and magnetic polarizabilities. We proposed the method for measurement the real part of the elastic coherent zero-angle scattering amplitude of particles and nuclei in a storage ring by the paramagnetic resonance in the periodical in time nuclear pseudoelectric and pseudomagnetic fields.

V. G. Baryshevsky; A. A. Gurinovich

2005-06-14T23:59:59.000Z

148

Superconducting energy storage  

DOE Green Energy (OSTI)

This report describes the status of energy storage involving superconductors and assesses what impact the recently discovered ceramic superconductors may have on the design of these devices. Our description is intended for R&D managers in government, electric utilities, firms, and national laboratories who wish an overview of what has been done and what remains to be done. It is assumed that the reader is acquainted with superconductivity, but not an expert on the topics discussed here. Indeed, it is the author`s aim to enable the reader to better understand the experts who may ask for the reader`s attention, support, or funding. This report may also inform scientists and engineers who, though expert in related areas, wish to have an introduction to our topic.

Giese, R.F.

1993-10-01T23:59:59.000Z

149

Advanced Vehicle Testing Activity: Energy Storage Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage Testing to someone by E-mail Share Advanced Vehicle Testing Activity: Energy Storage Testing on Facebook Tweet about Advanced Vehicle Testing Activity: Energy...

150

Advanced Vehicle Testing Activity: Energy Storage Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage Testing The Advanced Vehicle Testing Activity is tasked by the U.S. Department of Energy's Vehicle Technologies Office to conduct various types of energy storage...

151

Electricity Energy Storage Technology Options  

Science Conference Proceedings (OSTI)

A confluence of industry drivers8212including increased deployment of renewable generation, the high capital cost of managing grid peak demands, and large capital investments in grid infrastructure for reliability8212is creating new interest in electric energy storage systems. New EPRI research offers a current snapshot of the storage landscape and an analytical framework for estimating the benefits of applications and life-cycle costs of energy storage systems. This paper describes in detail 10 key appl...

2010-12-23T23:59:59.000Z

152

Energy storage options for space power  

DOE Green Energy (OSTI)

Including energy storage in a space power supply enhances the feasibility of using thermal power cycles (Rankine or Brayton) and providing high-power pulses. Review of storage options (superconducting magnets, capacitors, electrochemical batteries, thermal phase-change materials (PCM), and flywheels) suggests that flywheels and phase-change devices hold the most promise. Latent heat storage using inorganic salts and metallic eutectics offers thermal energy storage densities of 1500 to 2000 kJ/kg at temperatures to 1675/sup 0/K. Innovative techniques allow these media to operate in direct contact with the heat engine working fluid. Enhancing thermal conductivity and/or modifying PCM crystallization habit provide other options. Flywheels of low-strain graphite and Kevlar fibers have achieved mechanical energy storage densities of 300 kJ/kg. With high-strain graphite fibers, storage densities appropriate to space power needs (approx. 550 kJ/kg) seem feasible. Coupling advanced flywheels with emerging high power density homopolar generators and compulsators could result in electric pulse-power storage modules of significantly higher energy density.

Hoffman, H.W.; Martin, J.F.; Olszewski, M.

1985-01-01T23:59:59.000Z

153

The Power of Energy Storage  

E-Print Network (OSTI)

including composite materials, mechanical energy storage, nondestructive evaluation, and synchrotronNSEL NuclearScienceandEngineeringLaboratory Nanoscale Science Nano-Bio Interface Sustainable Energy. It draws the expertise of faculty members from different disciplines and promotes nuclear education

Sadoulet, Elisabeth

154

Energy Storage Laboratory (Fact Sheet)  

SciTech Connect

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Energy Storage Laboratory at the Energy Systems Integration Facility. At NREL's Energy Storage Laboratory in the Energy Systems Integration Facility (ESIF), research focuses on the integration of energy storage systems (both stationary and vehicle-mounted) and interconnection with the utility grid. Focusing on battery technologies, but also hosting ultra-capacitors and other electrical energy storage technologies, the laboratory will provide all resources necessary to develop, test, and prove energy storage system performance and compatibility with distributed energy systems. The laboratory will also provide robust vehicle testing capability, including a drive-in environmental chamber, which can accommodate commercial-sized hybrid, electric, biodiesel, ethanol, compressed natural gas, and hydrogen fueled vehicles. The Energy Storage Laboratory is designed to ensure personnel and equipment safety when testing hazardous battery systems or other energy storage technologies. Closely coupled with the research electrical distribution bus at ESIF, the Energy Storage Laboratory will offer megawatt-scale power testing capability as well as advanced hardware-in-the-loop and model-in-the-loop simulation capabilities. Some application scenarios are: The following types of tests - Performance, Efficiency, Safety, Model validation, and Long duration reliability. (2) Performed on the following equipment types - (a) Vehicle batteries (both charging and discharging V2G); (b) Stationary batteries; (c) power conversion equipment for energy storage; (d) ultra- and super-capacitor systems; and (e) DC systems, such as commercial microgrids.

2011-10-01T23:59:59.000Z

155

CFES RESEARCH THRUSTS: Energy Storage  

E-Print Network (OSTI)

CFES RESEARCH THRUSTS: Energy Storage Wind Energy Solar Energy Smart Grids Smart Buildings For our industrial partners, the Energy Scholars program is an opportunity to connect with the talent of Rensselaer. Sponsoring a Rensselaer Polytechnic Institute undergraduate as an Energy Scholar enables a company

Lü, James Jian-Qiang

156

NREL: Energy Storage - Laboratory Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory Capabilities Laboratory Capabilities Photo of NREL's Energy Storage Laboratory. NREL's Energy Storage Laboratory. Welcome to our Energy Storage Laboratory at the National Renewable Energy Laboratory (NREL) in Golden, Colorado. Much of our testing is conducted at this state-of-the-art laboratory, where researchers use cutting-edge modeling and analysis tools to focus on thermal management systems-from the cell level to the battery pack or ultracapacitor stack-for electric, hybrid electric, and fuel cell vehicles (EVs, HEVs, and FCVs). In 2010, we received $2 million in funding from the U.S. Department of Energy under the American Recovery and Reinvestment Act of 2009 (ARRA) to enhance and upgrade the NREL Battery Thermal and Life Test Facility. The Energy Storage Laboratory houses two unique calorimeters, along with

157

NREL: Learning - Energy Storage Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage Basics Energy Storage Basics The demand for electricity is seldom constant over time. Excess generating capacity available during periods of low demand can be used to energize an energy storage device. The stored energy can then be used to provide electricity during periods of high demand, helping to reduce power system loads during these times. Energy storage can improve the efficiency and reliability of the electric utility system by reducing the requirements for spinning reserves to meet peak power demands, making better use of efficient baseload generation, and allowing greater use of renewable energy technologies. A "spinning reserve" is a generator that is spinning and synchronized with the grid, ready for immediate power generation - like a car engine running with the gearbox

158

Energy Storage and Distributed Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

diagram of molecular structure, spectrocscopic data, low-swirl flame diagram of molecular structure, spectrocscopic data, low-swirl flame Energy Storage and Distributed Resources Energy Storage and Distributed Resources application/pdf icon esdr-org-chart-03-2013.pdf EETD researchers in the energy storage and distributed resources area conduct R&D and develops technologies that provide the electricity grid with significant storage capability for energy generated from renewable sources; real-time monitoring and response technologies for the "smart grid" to optimize energy use and communication between electricity providers and consumers; and technologies for improved electricity distribution reliability. Their goal is to identify and develop technologies, policies and strategies to enable a shift to renewable energy sources at $1 per watt for a

159

Reluctance apparatus for flywheel energy storage - Energy ...  

A motor generator for providing high efficiency, controlled voltage output or storage of energy in a flywheel system. A motor generator includes a stator of a soft ...

160

Energy Storage Success Stories - Energy Innovation Portal  

Energy Storage Success Stories These success stories highlight some of the effective licensing and partnership activity between laboratories and industry in the area ...

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Energy Storage Technologies - Energy Innovation Portal  

Hydrogen Electrochemical Energy Storage Device. The hydrogen fuel cell market is still in the early stages of development. However, with advances in technology the ...

162

ESS 2012 Peer Review - Thermoelectrochemical Energy Storage ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Energy's Office of Electricity Delivery & Energy Reliability. Thermoelectrochemical Energy Storage Problem: Flow batteries exhibit inefficiencies that are affected by...

163

Policy Questions on Energy Storage Technologies | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Policy Questions on Energy Storage Technologies Policy Questions on Energy Storage Technologies Memorandum from the Electricity Advisory Committee to Secretary Chu and Assistant...

164

Energy Storage Demonstration Project Locations | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Demonstration Project Locations Energy Storage Demonstration Project Locations Map of the United States showing the location of Energy Storage Demonstration projects created with...

165

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 Update Conference Presentations - Day 1, Session 2 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 2 The U.S. DOE Energy Storage Systems Program...

166

Webinar Presentation: Energy Storage Solutions for Microgrids...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Webinar Presentation: Energy Storage Solutions for Microgrids (November 2012) Webinar Presentation: Energy Storage Solutions for Microgrids (November 2012) On November 7, 2012,...

167

Department of Energy Will Hold a Batteries and Energy Storage...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Will Hold a Batteries and Energy Storage Information Meeting on October 21, 2011 Department of Energy Will Hold a Batteries and Energy Storage Information...

168

Substation Energy Storage Product Specification  

Science Conference Proceedings (OSTI)

This substation energy storage specification is intended to facilitate utility procurement of large grid-connected electrical energy storage systems that would typically be connected at medium voltage at distribution substations. Few utilities have experience with devices of this type, and industry practices are not extensively developed. Therefore, this update report may be used as a guide to suppliers of these devices (who may be unfamiliar with utility practices) as well as distribution utilities ...

2012-10-25T23:59:59.000Z

169

Lih thermal energy storage device  

DOE Patents (OSTI)

A thermal energy storage device for use in a pulsed power supply to store waste heat produced in a high-power burst operation utilizes lithium hydride as the phase change thermal energy storage material. The device includes an outer container encapsulating the lithium hydride and an inner container supporting a hydrogen sorbing sponge material such as activated carbon. The inner container is in communication with the interior of the outer container to receive hydrogen dissociated from the lithium hydride at elevated temperatures.

Olszewski, Mitchell (Knoxville, TN); Morris, David G. (Knoxville, TN)

1994-01-01T23:59:59.000Z

170

Grid Storage and the Energy Frontier Research Centers | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grid Storage and the Energy Frontier Research Centers Grid Storage and the Energy Frontier Research Centers DOE: Grid Storage and the Energy Frontier Research Centers Grid Storage...

171

LARGE SUPERCONDUCTING DETECTOR MAGNETS WITH ULTRA THIN COILS FOR USE IN HIGH ENERGY ACCELERATORS AND STORAGE RINGS  

E-Print Network (OSTI)

The development of these ,magnets bas proceeded with theThe Lawrence Beme1ey Laboratory bas developed a 1:adtca11. "The PLUTO magnet bas the largest central inductiOn 'and

Green, M.A.

2010-01-01T23:59:59.000Z

172

Part II Energy Storage Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

II. II. Energy Storage Technology Overview * Instructor - Haresh Kamath, EPRI PEAC * Short term - Flywheels, Cranking Batteries, Electrochemical Capacitors, SMES * Long term - Compressed Air, Pumped Hydro storage, Stationary, Flow Batteries 2 Overview * Technology Types - Batteries, flywheels, electrochemical capacitors, SMES, compressed air, and pumped hydro * Theory of Operation - Brief description of the technologies and the differences between them * State-of-the-art - Past demonstrations, existing hurdles and performance targets for commercialization * Cost and cost projections: - Prototype cost vs. fully commercialized targets Technology Choice for Discharge Time and Power Rating (From ESA) 4 Maturity Levels for Energy Storage Technologies * Mature Technologies - Conventional pumped hydro

173

Phase Change Thermal Energy Storage and Recovery in a ...  

Science Conference Proceedings (OSTI)

Symposium, Energy Storage III: Materials, Systems and Applications Symposium ... storage (LHTES) devices, particularly for solar energy storage applications.

174

SERI Solar-Energy-Storage Program  

DOE Green Energy (OSTI)

The SERI Solar Energy Storage Program is summarized. The program provides research, systems analysis, and assessments of thermal energy storage and transport in support of the Thermal Energy Storage Program of the DOE Division of Energy Storage Technology; emphasis is on thermal energy storage for solar thermal power and process heat applications and on thermal energy transport. Currently, research is in progress on direct-contact thermal energy storage and thermochemical energy storage and transport. In addition, SERI is directing the definition of new concepts for thermal energy storage and supporting research on thermal energy transport by sensible and latent heat media. SERI is performing systems analyses of thermal energy storage for solar thermal application and coordinating thermal energy storage activities for solar applications.

Wyman, C.E.

1981-08-01T23:59:59.000Z

175

Addressing the Grand Challenges in Energy Storage  

SciTech Connect

The editorial summarizes the contents of the special issue for energy storage in Advanced Functional Materials.

Liu, Jun

2013-02-25T23:59:59.000Z

176

Energy Programs | Advanced Storage Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Storage Systems Advanced Storage Systems Tapping Into Fuel Cells and Batteries Page 1 of 2 Imagine being able to drive a forty-mile round-trip commute every day without ever going near a gas pump. As the United States moves towards an energy economy with reduced dependence on foreign oil and fewer carbon emissions, development of alternative fuel sources and transmission of the energy they provide is only part of the equation. An increase in energy generated from intermittent renewable sources and the growing need for mobile energy will require new, efficient means of storing it, and technological advancements will be necessary to support the nation's future energy storage needs. A change toward alternative transportation - hydrogen fuel-cell vehicles, hybrid electric vehicles, plug-in hybrid-electric vehicles and electric

177

Electrical Energy Storage  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electrochemical Flow Storage System Typical Cell Power Density (Wcm 2 ) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 UTRC Conventional Conventional flow battery cell UTRC flow battery...

178

Energy Storage, Transport, and Conversion in CNST  

Science Conference Proceedings (OSTI)

Energy Storage, Transport, and Conversion in CNST. Nanotribology ... Theory and Modeling of Materials for Renewable Energy. Nanostructures ...

2013-05-02T23:59:59.000Z

179

Fuel Cells, Hydrogen Storage, Ferroelectrics, Wind Energy  

Science Conference Proceedings (OSTI)

Mar 15, 2012 ... Energy Nanomaterials: Fuel Cells, Hydrogen Storage, Ferroelectrics, Wind Energy Sponsored by: The Minerals, Metals and Materials Society, ...

180

Smart Storage Pty Ltd | Open Energy Information  

Open Energy Info (EERE)

"Smart Storage Pty Ltd" Retrieved from "http:en.openei.orgwindex.php?titleSmartStoragePtyLtd&oldid351195" Categories: Clean Energy Organizations Companies...

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

High Capacity Hydrogen Storage Nanocomposite - Energy ...  

Energy Storage Advanced Materials High Capacity Hydrogen Storage Nanocomposite Processes to add metal hydrideds to nanocarbon structures to yield high capacity ...

182

Electric utility applications of hydrogen energy storage systems  

DOE Green Energy (OSTI)

This report examines the capital cost associated with various energy storage systems that have been installed for electric utility application. The storage systems considered in this study are Battery Energy Storage (BES), Superconducting Magnetic Energy Storage (SMES) and Flywheel Energy Storage (FES). The report also projects the cost reductions that may be anticipated as these technologies come down the learning curve. This data will serve as a base-line for comparing the cost-effectiveness of hydrogen energy storage (HES) systems in the electric utility sector. Since pumped hydro or compressed air energy storage (CAES) is not particularly suitable for distributed storage, they are not considered in this report. There are no comparable HES systems in existence in the electric utility sector. However, there are numerous studies that have assessed the current and projected cost of hydrogen energy storage system. This report uses such data to compare the cost of HES systems with that of other storage systems in order to draw some conclusions as to the applications and the cost-effectiveness of hydrogen as a electricity storage alternative.

Swaminathan, S.; Sen, R.K.

1997-10-15T23:59:59.000Z

183

EXPERIMENTAL AND THEORETICAL STUDIES OF THERMAL ENERGY STORAGE IN AQUIFERS  

E-Print Network (OSTI)

Department of Energy, Energy Storage Division through thegeneration and energy storage, Presented at Frontiers ofIn Proceed- ings of Thermal Energy Storage in Aquifers Work-

Tsang, Chin Fu

2011-01-01T23:59:59.000Z

184

Carbon Capture and Storage | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Carbon Capture and Storage Carbon Capture and Storage Through Office of Fossil Energy R&D the United States has become a world leader in carbon capture and storage science and...

185

The Solar Storage Company | Open Energy Information  

Open Energy Info (EERE)

Storage Company Place Palo Alto, California Zip 1704 Product US-based start-up developing energy production and storage systems. References The Solar Storage Company1 LinkedIn...

186

Post regulation circuit with energy storage  

DOE Patents (OSTI)

A charge regulation circuit provides regulation of an unregulated voltage supply and provides energy storage. The charge regulation circuit according to the present invention provides energy storage without unnecessary dissipation of energy through a resistor as in prior art approaches.

Ball, Don G. (Livermore, CA); Birx, Daniel L. (Oakley, CA); Cook, Edward G. (Livermore, CA)

1992-01-01T23:59:59.000Z

187

Matt Rogers on AES Energy Storage  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Energy and AES Energy Storage recently agreed to a $17.1M conditional loan guarantee commitment. This project will develop the first battery-based energy storage system to provide...

188

Storage Related News | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storage Related News Storage Related News Storage Related News November 1, 2013 November 13 ESTAP Webinar: Duke Energy's Energy Storage Projects On Wednesday, November 13 from 1 - 2 p.m. ET, Clean Energy States Alliance will host a webinar on Duke Energy's battery energy storage systems. This webinar will be introduced by Dr. Imre Gyuk, Energy Storage Program Manager in the Office of Electricity Delivery and Energy Reliability. August 30, 2013 September 16 ESTAP Webinar: Optimizing the Benefits of a PV with Battery Storage System On Monday, September 16 from 1 - 2 p.m. ET, Clean Energy States Alliance will host a webinar on optimizing the benefits of a photovoltaic (PV) storage system with a battery. This webinar will be introduced by Dr. Imre Gyuk, Energy Storage Program Manager in the Office of Electricity Delivery

189

Advanced research in solar-energy storage  

DOE Green Energy (OSTI)

The Solar Energy Storage Program at the Solar Energy Research Institute is reviewed. The program provides research, systems analyses, and economic assessments of thermal and thermochemical energy storage and transport. Current activities include experimental research into very high temperature (above 800/sup 0/C) thermal energy storage and assessment of novel thermochemical energy storage and transport systems. The applications for such high-temperature storage are thermochemical processes, solar thermal-electric power generation, cogeneration of heat and electricity, industrial process heat, and thermally regenerative electrochemical systems. The research results for five high-temperature thermal energy storage technologies and two thermochemical systems are described.

Luft, W.

1983-01-01T23:59:59.000Z

190

Second generation high-temperature superconducting solenoid coils and energy storage.  

E-Print Network (OSTI)

??One of the most promising applications of superconductors is in Superconducting Magnetic Energy Storage (SMES) systems, which are becoming the enabling engines for improving the… (more)

Baiej, Hanan Tahir

2013-01-01T23:59:59.000Z

191

Energy Conversion and Storage Program  

DOE Green Energy (OSTI)

The Energy Conversion and Storage Program applies chemistry and materials science principles to solve problems in (1) production of new synthetic fuels, (2) development of high-performance rechargeable batteries and fuel cells, (3) development of advanced thermochemical processes for energy conversion, (4) characterization of complex chemical processes, and (5) application of novel materials for energy conversion and transmission. Projects focus on transport-process principles, chemical kinetics, thermodynamics, separation processes, organic and physical chemistry, novel materials, and advanced methods of analysis. Electrochemistry research aims to develop advanced power systems for electric vehicle and stationary energy storage applications. Topics include identification of new electrochemical couples for advanced rechargeable batteries, improvements in battery and fuel-cell materials, and the establishment of engineering principles applicable to electrochemical energy storage and conversion. Chemical Applications research includes topics such as separations, catalysis, fuels, and chemical analyses. Included in this program area are projects to develop improved, energy-efficient methods for processing waste streams from synfuel plants and coal gasifiers. Other research projects seek to identify and characterize the constituents of liquid fuel-system streams and to devise energy-efficient means for their separation. Materials Applications research includes the evaluation of the properties of advanced materials, as well as the development of novel preparation techniques. For example, the use of advanced techniques, such as sputtering and laser ablation, are being used to produce high-temperature superconducting films.

Cairns, E.J.

1992-03-01T23:59:59.000Z

192

Design and operating experience of an ac-dc power converter for a superconducting magnetic energy storage unit  

DOE Green Energy (OSTI)

The design philosophy and the operating behavior of a 5.5 kA, +-2.5 kV converter, being the electrical interface between a high voltage transmission system and a 30 MJ superconducting coil, are documented in this paper. Converter short circuit tests, load tests under various control conditions, dc breaker tests for magnet current interruption, and converter failure modes are described.

Boenig, H.J.; Nielsen, R.G.; Sueker, K.H.

1984-01-01T23:59:59.000Z

193

Minimum Magnetic Energy Theorem  

E-Print Network (OSTI)

The Thomson's Theorem states that static charge distributions in conductors show up at the conducting surfaces in an equipotential configuration, so that the electrostatic energy is a minimum. In this work we study an analogue statement for magnetic systems: in a given set of conductors, the stored magnetic field energy reaches the minimum value for superficial current distributions so that the magnetic vector potential is tangent to the conductors surfaces. This is the counterpart of Thomson's theorem for the magnetic field.

Fiolhais, M C N

2008-01-01T23:59:59.000Z

194

Prestressed elastomer for energy storage  

DOE Patents (OSTI)

Disclosed is a regenerative braking device for an automotive vehicle. The device includes a power isolating assembly (14), an infinitely variable transmission (20) interconnecting an input shaft (16) with an output shaft (18), and an energy storage assembly (22). The storage assembly includes a plurality of elastomeric rods (44, 46) mounted for rotation and connected in series between the input and output shafts. The elastomeric rods are prestressed along their rotational or longitudinal axes to inhibit buckling of the rods due to torsional stressing of the rods in response to relative rotation of the input and output shafts.

Hoppie, Lyle O. (Birmingham, MI); Speranza, Donald (Canton, MI)

1982-01-01T23:59:59.000Z

195

Large Scale Computing and Storage Requirements for High Energy Physics  

E-Print Network (OSTI)

Computing and Storage Requirements for High Energy Physics [for High Energy Physics Computational  and  Storage  for High Energy Physics Computational  and  Storage  

Gerber, Richard A.

2011-01-01T23:59:59.000Z

196

Fact Sheet: Lithium-Ion Batteries for Stationary Energy Storage...  

NLE Websites -- All DOE Office Websites (Extended Search)

Fact Sheet: Lithium-Ion Batteries for Stationary Energy Storage (October 2012) Fact Sheet: Lithium-Ion Batteries for Stationary Energy Storage (October 2012) DOE's Energy Storage...

197

Thermal Energy Storage for Cooling of Commercial Buildings  

E-Print Network (OSTI)

Building Thermal Energy _Storage in ASEAN Countries,"Company, "Thermal Energy Storage for Cooling," Seminar25393 DE91 ,THERMAL ENERGY STORAGE FOR COOLING OF COMMERCIAL

Akbari, H.

2010-01-01T23:59:59.000Z

198

Implementing a Hydrogen Energy Infrastructure: Storage Options and System Design  

E-Print Network (OSTI)

challenge. Hydrogen energy storage density has been steadilya Hydrogen Energy Infrastructure: Storage Options and Systema Hydrogen Energy Infrastructure: Storage Options and System

Ogden, J; Yang, Christopher

2005-01-01T23:59:59.000Z

199

Fact Sheet: Energy Storage Database (October 2012) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Database (October 2012) Fact Sheet: Energy Storage Database (October 2012) DOE and Sandia National Laboratories are developing a database of energy storage projects...

200

Rational Material Architecture Design for Better Energy Storage  

E-Print Network (OSTI)

in Electrochemical Energy Storage. Science 334, (6058), 917-for electrochemical energy storage. Adv. Funct. Mater. 2009,electrochemical capacitive energy storage. Angew. Chem. Int.

Chen, Zheng

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Thermal Energy Storage for Cooling of Commercial Buildings  

E-Print Network (OSTI)

of Commercial Building Thermal Energy _Storage in ASEANGas Electric Company, "Thermal Energy Storage for Cooling,"LBL--25393 DE91 ,THERMAL ENERGY STORAGE FOR COOLING OF

Akbari, H.

2010-01-01T23:59:59.000Z

202

Implementing a Hydrogen Energy Infrastructure: Storage Options and System Design  

E-Print Network (OSTI)

as a key challenge. Hydrogen energy storage density has beena Hydrogen Energy Infrastructure: Storage Options and Systema Hydrogen Energy Infrastructure: Storage Options and System

Ogden, J; Yang, Christopher

2005-01-01T23:59:59.000Z

203

Explorations of Novel Energy Conversion and Storage Systems  

E-Print Network (OSTI)

hydrogen. Energy storage via molecular hydrogen is, ofhydrogen storage. International Journal of Hydrogen Energy,hydrogen storage. International Journal of Hydrogen Energy,

Duffin, Andrew Mark

2010-01-01T23:59:59.000Z

204

Smart Grid Regional and Energy Storage Demonstration Projects...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Regional and Energy Storage Demonstration Projects: Awards Smart Grid Regional and Energy Storage Demonstration Projects: Awards List of Smart Grid Regional and Energy Storage...

205

COMPRESSED-AIR ENERGY STORAGE SYSTEMS FOR STAND-ALONE OFF-GRID PHOTOVOLTAIC MODULES  

E-Print Network (OSTI)

-storage materials, flywheels, pumped hydro (PH), superconducting magnetic energy storage (SMES) and compressed airCOMPRESSED-AIR ENERGY STORAGE SYSTEMS FOR STAND-ALONE OFF-GRID PHOTOVOLTAIC MODULES Dominique, USA ABSTRACT In this work, a low-cost, low-volume, low-maintenance, small-scale compressed-air energy

Deymier, Pierre

206

Regenerative Fuel Cells for Energy Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

11 1 Regenerative Fuel Cells for Energy Storage April 2011 Corky Mittelsteadt April 2011 2 Outline 1. Regenerative Fuel Cells at Giner 2. Regenerative Systems for Energy Storage 1....

207

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 3 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

208

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, Session 1 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 1 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update...

209

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 3 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

210

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, Session 1 Energy Storage Systems 2010 Update Conference Presentations - Day 3, Session 1 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update...

211

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Poster Session Energy Storage Systems 2010 Update Conference Presentations - Day 3: Poster Session The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking...

212

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 4 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

213

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, Session 4 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 4 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update...

214

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 4 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

215

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, Session 2 Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 2 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update...

216

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, Session 4 Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 4 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update...

217

Energy Storage Systems 2010 Update Conference Presentations ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 Energy Storage Systems 2010 Update Conference Presentations - Day 3, Session 3 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at...

218

Economic analysis of electric energy storage.  

E-Print Network (OSTI)

??This thesis presents a cost analysis of grid-connected electric energy storage. Various battery energy storage technologies are considered in the analysis. Life-cycle cost analysis is… (more)

Poonpun, Piyasak

2006-01-01T23:59:59.000Z

219

THERMAL ENERGY STORAGE IN AQUIFERS WORKSHOP  

E-Print Network (OSTI)

Key to Large-Scale Cogeneration?" Public Power, v, 35, no.Thermal Energy Storage for Cogeneration and Solar Systems,"Energy Storage for Cogeneration and Solar Systems, tion from

Authors, Various

2011-01-01T23:59:59.000Z

220

Energy Storage Systems 2006 Peer Review | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storage Systems 2006 Peer Review Energy Storage Systems 2006 Peer Review The 2006 Peer Review Meeting for the DOE Energy Storage Systems (ESS) Program was held in Washington DC on...

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Bulk Energy Storage Impact and Value Analysis  

Science Conference Proceedings (OSTI)

This paper is intended for planners, R&D managers, and potential investors who manage or interpret results from value and impact analysis of energy storage. Due to performance improvements and cost reductions of battery technologies and the expectation that energy storage may help to manage potential operational challenges of incorporating variable, renewable energy resources, energy storage systems are under renewed investigation as a future electric system resource. Pumped hydro storage ...

2012-12-31T23:59:59.000Z

222

Nanocomposites for Energy Transport, Harvesting and Storage  

Science Conference Proceedings (OSTI)

Mar 14, 2012 ... Nanocomposites: Nanocomposites for Energy Transport, Harvesting and Storage Sponsored by: The Minerals, Metals and Materials Society, ...

223

Strategic Intelligence Update: Energy Storage & Distributed Generation  

Science Conference Proceedings (OSTI)

Distributed generation and energy storage technologies add value to a wide range of applications within the electric utility enterprise. Energy storage at megawatt-hour scales can be used to enable generators to better follow load and stabilize transmission voltage and frequency. Both distributed generation and energy storage systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage e...

2009-08-07T23:59:59.000Z

224

Strategic Intelligence Update: Distributed Generation & Energy Storage  

Science Conference Proceedings (OSTI)

Distributed generation and energy storage technologies add value to a wide range of applications within the electric utility enterprise. Energy storage at megawatt-hour scales can be used to enable generators to better follow load and stabilize transmission voltage and frequency. Both distributed generation and energy storage systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage e...

2009-12-17T23:59:59.000Z

225

Strategic Intelligence Update: Energy Storage & Distributed Generation  

Science Conference Proceedings (OSTI)

Distributed generation and energy storage technologies add value to a wide range of applications within the electric utility enterprise. Energy storage at megawatt-hour scales can be used to enable generators to better follow load and stabilize transmission voltage and frequency. Both distributed generation and energy storage systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage e...

2009-06-22T23:59:59.000Z

226

Hybrid Controller for Multiple Energy Storage Devices ...  

Summary. A new hybrid energy storage controller developed by researchers at Pacific Northwest National Laboratory is designed for a centralized ...

227

Strategic Intelligence Update: Distributed Generation & Energy Storage  

Science Conference Proceedings (OSTI)

Distributed generation and energy storage technologies add value to a wide range of applications within the electric utility enterprise. Energy storage at megawatt-hour scales can be used to enable generators to better follow load and stabilize transmission voltage and frequency. Both distributed generation and energy storage systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage e...

2009-10-08T23:59:59.000Z

228

Electrochemical Energy Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

has been has been actively involved in the development of advanced batteries since the late 1960s when it initiated R&D on high-temperature lithium sulfur batteries. In the early 1970s, the US Department of Energy (DOE) established its first independent battery test facility at Argonne and named it the National Battery Test Laboratory (NBTL), for the purpose of conducting independent evaluations on advanced battery technologies that were potential candidates for use in battery-powered electric vehicles. NBTL incorporated a well equipped post-test analysis laboratory that was instrumental in helping to identify life-limiting mechanisms with several candidate battery technologies. Even in these early days of the battery program, Argonne was internationally

229

Underground Energy Storage Program. 1983 annual summary  

DOE Green Energy (OSTI)

The Underground Energy Storage Program approach, structure, history, and milestones are described. Technical activities and progress in the Seasonal Thermal Energy Storage and Compressed Air Energy Storage components of the program are then summarized, documenting the work performed and progress made toward resolving and eliminating technical and economic barriers associated with those technologies. (LEW)

Kannberg, L.D.

1984-06-01T23:59:59.000Z

230

Vehicle Technologies Office: Energy Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage Energy Storage Improving the batteries for electric drive vehicles, including hybrid electric (HEV) and plug-in electric (PEV) vehicles, is key to improving vehicles' economic, social, and environmental sustainability. In fact, transitioning to a light-duty fleet of HEVs and PEVs could reduce U.S. foreign oil dependence by 30-60% and greenhouse gas emissions by 30-45%, depending on the exact mix of technologies. For a general overview of electric drive vehicles, see the DOE's Alternative Fuel Data Center's pages on Hybrid and Plug-in Electric Vehicles and Vehicle Batteries. While a number of electric drive vehicles are available on the market, further improvements in batteries could make them more affordable and convenient to consumers. In addition to light-duty vehicles, some heavy-duty manufacturers are also pursuing hybridization of medium and heavy-duty vehicles to improve fuel economy and reduce idling.

231

Microwavable thermal energy storage material  

DOE Patents (OSTI)

A microwavable thermal energy storage material is provided which includes a mixture of a phase change material and silica, and a carbon black additive in the form of a conformable dry powder of phase change material/silica/carbon black, or solid pellets, films, fibers, moldings or strands of phase change material/high density polyethylene/ethylene-vinyl acetate/silica/carbon black which allows the phase change material to be rapidly heated in a microwave oven. The carbon black additive, which is preferably an electrically conductive carbon black, may be added in low concentrations of from 0.5 to 15% by weight, and may be used to tailor the heating times of the phase change material as desired. The microwavable thermal energy storage material can be used in food serving applications such as tableware items or pizza warmers, and in medical wraps and garments.

Salyer, Ival O. (Dayton, OH)

1998-09-08T23:59:59.000Z

232

Microwavable thermal energy storage material  

DOE Patents (OSTI)

A microwavable thermal energy storage material is provided which includes a mixture of a phase change material and silica, and a carbon black additive in the form of a conformable dry powder of phase change material/silica/carbon black, or solid pellets, films, fibers, moldings or strands of phase change material/high density polyethylene/ethylene vinyl acetate/silica/carbon black which allows the phase change material to be rapidly heated in a microwave oven. The carbon black additive, which is preferably an electrically conductive carbon black, may be added in low concentrations of from 0.5 to 15% by weight, and may be used to tailor the heating times of the phase change material as desired. The microwavable thermal energy storage material can be used in food serving applications such as tableware items or pizza warmers, and in medical wraps and garments. 3 figs.

Salyer, I.O.

1998-09-08T23:59:59.000Z

233

Integratedenergy storage system for optimal energy production.  

E-Print Network (OSTI)

?? This project served to analyze the effects that energy storage can have on energy production.  The study was aimed at Johannes CHP bio fuel.… (more)

Stevens, Kristoffer

2013-01-01T23:59:59.000Z

234

Nanocomposite Materials for Energy Storage Devices  

Science Conference Proceedings (OSTI)

Abstract Scope, High power energy storage devices are critical for the development of zero-emission electrical vehicles, large scale smart grid, and energy ...

235

Redox Flow Batteries for Grid-scale Energy Storage - Energy ...  

Wind Energy; Partners (27) Visual Patent Search; Success Stories; News; Events; Startup America Industrial Technologies Energy Storage Redox ...

236

Energy Harvesting Communications with Hybrid Energy Storage and Processing Cost  

E-Print Network (OSTI)

Energy Harvesting Communications with Hybrid Energy Storage and Processing Cost Omur Ozel Khurram with an energy harvesting transmitter with non-negligible processing circuitry power and a hybrid energy storage for energy storage while the battery has unlimited space. The transmitter stores the harvested energy either

Ulukus, Sennur

237

High Efficiency Electrical Energy Storage Using Reversible Solid ...  

Science Conference Proceedings (OSTI)

Symposium, Energy Storage III: Materials, Systems and Applications Symposium. Presentation Title, High Efficiency Electrical Energy Storage Using Reversible ...

238

Explorations of Novel Energy Conversion and Storage Systems  

E-Print Network (OSTI)

of Novel Energy Conversion and Storage Systems By Andrewof Novel Energy Conversion and Storage Systems by Andrew

Duffin, Andrew Mark

2010-01-01T23:59:59.000Z

239

Center for Electrical Energy Storage Home  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Energy Storage DOE Logo Electrical Energy Storage DOE Logo Focus Areas 3D Interface Architectures Dynamically Responsive Interfaces Control of Interfacial Processes Theory Search Argonne ... Search Argonne Home >Center for Electrical Energy Storage > Home Directorate & Principal Investigators Management Council Executive Committee Research Staff External Advisory Committee News Science Highlights Publications & Presentations CEES-Authored and Co-Authored Cover Stories Peer-Reviewed Publications Presentations Patents Frontiers in Energy Research Awards Jobs at CEES Energy Frontier Research Centers at Argonne Center for Electrical Energy Storage - an Energy Frontier Research Center Above: An artistic rendition showing a metal-fluoride stabilized surface structure at a lithium cobalt oxide

240

Thermal Energy Storage for Cooling of Commercial Buildings  

E-Print Network (OSTI)

OF THIS DOCUME THERMAL FOR COOLING ENERGY STORAGE BUILDINGSi- LBL-25393 THERMAL FOR COOLING w ENERGY STORAGE BUILDINGSpeak power periods, thermal storage for cooling has become a

Akbari, H.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

FY06 DOE Energy Storage Program PEER Review  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 DOE Energy Storage Program PEER Review FY07 DOE Energy Storage Program PEER Review John D. Boyes Sandia National Laboratories Mission Mission Develop advanced electricity storage...

242

Capacitors for Power Grid Storage | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

presentation Capacitors for Power Grid Storage More Documents & Publications Battery SEAB Presentation Energy Storage & Power Electronics 2008 Peer Review - Energy Storage...

243

NREL: Learning - Energy Delivery and Storage Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Delivery and Storage Basics Helping secure a clean energy future for the nation and the world isn't just about reducing energy usage or producing clean energy. It is about...

244

Economics of compressed air energy storage employing thermal energy storage  

DOE Green Energy (OSTI)

The approach taken in this study is to adopt system design and capital cost estimates from three independent CAES studies (eight total designs) and, by supplying a common set of fuel/energy costs and economic assumptions in conjunction with a common methodology, to arrive at a series of levelized energy costs over the system's lifetime. In addition, some analyses are provided to gauge the sensitivity of these levelized energy costs to fuel and compression energy costs and to system capacity factors. The systems chosen for comparison are of four generic types: conventional CAES, hybrid CAES, adiabatic CAES, and an advanced-design gas turbine (GT). In conventional CAES systems the heat of compression generated during the storage operation is rejected to the environment, and later, during the energy-generation phase, turbine fuel must be burned to reheat the compressed air. In the hybrid systems some of the heat of compression is stored and reapplied later during the generation phase, thereby reducing turbine fuel requirements. The adiabatic systems store adequate thermal energy to eliminate the need for turbine fuel entirely. The gas turbine is included within the report for comparison purposes; it is an advanced-design turbine, one that is expected to be available by 1985.

Schulte, S.C.; Reilly, R.W.

1979-11-01T23:59:59.000Z

245

Economics of compressed air energy storage employing thermal energy storage  

SciTech Connect

The approach taken in this study is to adopt system design and capital cost estimates from three independent CAES studies (eight total designs) and, by supplying a common set of fuel/energy costs and economic assumptions in conjunction with a common methodology, to arrive at a series of levelized energy costs over the system's lifetime. In addition, some analyses are provided to gauge the sensitivity of these levelized energy costs to fuel and compression energy costs and to system capacity factors. The systems chosen for comparison are of four generic types: conventional CAES, hybrid CAES, adiabatic CAES, and an advanced-design gas turbine (GT). In conventional CAES systems the heat of compression generated during the storage operation is rejected to the environment, and later, during the energy-generation phase, turbine fuel must be burned to reheat the compressed air. In the hybrid systems some of the heat of compression is stored and reapplied later during the generation phase, thereby reducing turbine fuel requirements. The adiabatic systems store adequate thermal energy to eliminate the need for turbine fuel entirely. The gas turbine is included within the report for comparison purposes; it is an advanced-design turbine, one that is expected to be available by 1985.

Schulte, S.C.; Reilly, R.W.

1979-11-01T23:59:59.000Z

246

Energy Storage Systems 2007 Peer Review | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 Peer Review 7 Peer Review Energy Storage Systems 2007 Peer Review The U.S. DOE Energy Storage Systems Program (ESS) held an annual peer review on September 27, 2007 in San Francisco, CA. The agenda and ESS program overview presentation are below. Presentation categories Economics - Benefit Studies and Environment Benefit Studies Utility & Commercial Applications of Advanced Energy Storage Systems International Energy Storage Programs Power Electronics Innovations in Energy Storage Systems ESS 2007 Peer Review - Agenda.pdf ESS 2007 Peer Review - Program Overview - John Boyes, SNL.pdf More Documents & Publications Energy Storage Systems 2006 Peer Review Energy Storage & Power Electronics 2008 Peer Review - Agenda/Presentation List Energy Storage Systems 2007 Peer Review - International Energy Storage

247

Microsoft Word - Grid Energy Storage December 2013  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grid Energy Storage Grid Energy Storage U.S. Department of Energy December 2013 Acknowledgements We would like to acknowledge the members of the core team dedicated to developing this report on grid energy storage: Imre Gyuk (OE), Mark Johnson (ARPA-E), John Vetrano (Office of Science), Kevin Lynn (EERE), William Parks (OE), Rachna Handa (OE), Landis Kannberg (PNNL), Sean Hearne & Karen Waldrip (SNL), Ralph Braccio (Booz Allen Hamilton). 2 Table of Contents Acknowledgements ....................................................................................................................................... 1 Executive Summary ....................................................................................................................................... 4

248

Duke Energy Notrees Wind Storage Demonstration Project  

Science Conference Proceedings (OSTI)

This EPRI technical update is an interim report summarizing the status of Duke Energy’s Notrees Wind Storage Demonstration Project, which involves integrating a 36-MW battery energy storage system (BESS) from Xtreme Power with the 152.6-MW Notrees Wind Farm. Xtreme Power’s solid lead-acid battery represents one of an emerging number of energy storage devices endowed with the potential to serve multiple ...

2012-12-12T23:59:59.000Z

249

Strategic Intelligence Update: Energy Storage & Distributed Generation  

Science Conference Proceedings (OSTI)

Energy Storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy arbitrage and by ...

2012-05-24T23:59:59.000Z

250

Strategic Intelligence Update: Energy Storage & Distributed Generation  

Science Conference Proceedings (OSTI)

Energy Storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy arbitrage and by ...

2012-03-20T23:59:59.000Z

251

Strategic Intelligence Update: Energy Storage & Distributed Generation  

Science Conference Proceedings (OSTI)

Energy Storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy arbitrage and by ...

2012-07-31T23:59:59.000Z

252

Test report : Milspray Scorpion energy storage device.  

Science Conference Proceedings (OSTI)

The Department of Energy Office of Electricity (DOE/OE), Sandia National Laboratory (SNL) and the Base Camp Integration Lab (BCIL) partnered together to incorporate an energy storage system into a microgrid configured Forward Operating Base to reduce the fossil fuel consumption and to ultimately save lives. Energy storage vendors have supplied their systems to SNL Energy Storage Test Pad (ESTP) for functional testing and a subset of these systems were selected for performance evaluation at the BCIL. The technologies tested were electro-chemical energy storage systems comprised of lead acid, lithium-ion or zinc-bromide. MILSPRAY Military Technologies has developed an energy storage system that utilizes lead acid batteries to save fuel on a military microgrid. This report contains the testing results and some limited assessment of the Milspray Scorpion Energy Storage Device.

Rose, David Martin; Schenkman, Benjamin L.; Borneo, Daniel R.

2013-08-01T23:59:59.000Z

253

Enabling Utility-Scale Electrical Energy Storage through Underground Hydrogen-Natural Gas Co-Storage.  

E-Print Network (OSTI)

??Energy storage technology is needed for the storage of surplus baseload generation and the storage of intermittent wind power, because it can increase the flexibility… (more)

Peng, Dan

2013-01-01T23:59:59.000Z

254

November 13 ESTAP Webinar: Duke Energy's Energy Storage Projects |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 13 ESTAP Webinar: Duke Energy's Energy Storage Projects November 13 ESTAP Webinar: Duke Energy's Energy Storage Projects November 13 ESTAP Webinar: Duke Energy's Energy Storage Projects November 1, 2013 - 5:00pm Addthis On Wednesday, November 13 from 1 - 2 p.m. ET, Clean Energy States Alliance will host a webinar on Duke Energy's battery energy storage systems. This webinar will be introduced by Dr. Imre Gyuk, Energy Storage Program Manager in the Office of Electricity Delivery and Energy Reliability. The webinar will discuss Duke Energy's six deployed battery systems, which cover a wide range of battery chemistries, sizes, locations on the grid, and applications. The deployments include the Notrees Wind Storage project, which OE supports under the Recovery Act-funded Smart Grid Energy Storage Demonstration Program. The other projects are the Rankin

255

November 13 ESTAP Webinar: Duke Energy's Energy Storage Projects...  

NLE Websites -- All DOE Office Websites (Extended Search)

Gyuk, Energy Storage Program Manager in the Office of Electricity Delivery and Energy Reliability. The webinar will discuss Duke Energy's six deployed battery systems, which...

256

Battery energy storage market feasibility study  

DOE Green Energy (OSTI)

Under the sponsorship of the Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed energy storage as an important enabling technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

Kraft, S. [Frost and Sullivan, Mountain View, CA (United States); Akhil, A. [Sandia National Labs., Albuquerque, NM (United States). Energy Storage Systems Analysis and Development Dept.

1997-07-01T23:59:59.000Z

257

Thermal energy storage for cogeneration applications  

DOE Green Energy (OSTI)

Cogeneration is playing an increasingly important role in providing energy efficient power generation and thermal energy for space heating and industrial process heat applications. However, the range of applications for cogeneration could be further increased if the generation of electricity could be coupled from the generation of process heat. Thermal energy storage (TES) can decouple power generation from the production of process heat, allowing the production of dispatchable power while fully utilizing the thermal energy available from the prime mover. The Pacific Northwest Laboratory (PNL) leads the US Department of Energy`s Thermal Energy Storage Program. The program focuses on developing TES for daily cycling (diurnal storage), annual cycling (seasonal storage), and utility applications (utility thermal energy storage (UTES)). Several of these technologies can be used in a cogeneration facility. This paper discusses TES concepts relevant to cogeneration and describes the current status of these TES systems.

Drost, M.K.; Antoniak, Z.I.

1992-04-01T23:59:59.000Z

258

Storage Water Heaters | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storage Water Heaters Storage Water Heaters Storage Water Heaters June 15, 2012 - 6:00pm Addthis Consider energy efficiency when selecting a conventional storage water heater to avoid paying more over its lifetime. | Photo courtesy of ©iStockphoto/JulNichols. Consider energy efficiency when selecting a conventional storage water heater to avoid paying more over its lifetime. | Photo courtesy of ©iStockphoto/JulNichols. Conventional storage water heaters remain the most popular type of water heating system for the home. Here you'll find basic information about how storage water heaters work; what criteria to use when selecting the right model; and some installation, maintenance, and safety tips. How They Work A single-family storage water heater offers a ready reservoir -- from 20 to

259

New Materials for Energy Storage and Electrocatalysis  

Science Conference Proceedings (OSTI)

Enhanced Electrical Capacitance and Energy Storage in Defect Induced ... Silicon-based Electrodes for Li-ion Batteries: Spectroscopic Analysis for Improved ...

260

Storage Water Heaters | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

6:00pm Addthis Consider energy efficiency when selecting a conventional storage water heater to avoid paying more over its lifetime. | Photo courtesy of iStockphoto...

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Webinar Presentation: Energy Storage Solutions for Microgrids...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Aliance (CESA) hosted a webinar with Connecticut DEEP in conjuction with Sandia National Lab and DOE on State and Federal Energy Storage Technology Partnership (ESTAP). The four...

262

NREL: Energy Storage - About the Project  

NLE Websites -- All DOE Office Websites (Extended Search)

more secure transportation future. One important aim of the program is to advance energy storage (ES) technologies for fuel cell, electric, and hybrid electric vehicles...

263

NREL: Energy Storage - Research and Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Research and Development Photo of thermal imaging of a battery. Advancing energy storage devices is a crucial pathway in the development of fuel cell, hybrid electric, and electric...

264

Grid Strategy 2011: Energy Storage Monetization  

Science Conference Proceedings (OSTI)

Energy storage is the only grid asset with the ability to act both as a load and a generation source by first storing energy for a limited duration and then releasing it. It is a flexible grid asset capable of providing multiple grid benefits. However, aside from large pumped hydro storage plants, very little energy storage has been deployed on the grid. Due to the high cost of energy storage, aggregation of multiple benefits is generally required to justify the investment. Due to the limited duration of...

2011-10-14T23:59:59.000Z

265

AQUIFER THERMAL ENERGY STORAGE-A SURVEY  

E-Print Network (OSTI)

energy storage for cogeneration and solar systems, inTwin City district cogeneration system, in Proceedings,proposed system, based on cogeneration of power and heat by

Tsang, Chin Fu

2012-01-01T23:59:59.000Z

266

Energy Storage: Materials, Systems and Applications  

Science Conference Proceedings (OSTI)

Mar 29, 2011 ... The transition from the fossil economy to a greener, sustainable economy cannot, however, be realized without efficient energy storage systems ...

267

Energy Storage Research & Development -- 2004 Annual Progress...  

NLE Websites -- All DOE Office Websites (Extended Search)

ENERGY STORAGE RESEARCH & DEVELOPMENT FreedomCAR and Vehicle Technologies Program Acknowledgement We would like to thank all our program participants for their contributions to the...

268

Energy Conversion, Storage, and Transport Programs and ...  

Science Conference Proceedings (OSTI)

... The Society of Automotive Engineers International (SAE) has proposed a ... hydrogen storage material satisfies the Department of Energy (DoE) goal ...

2010-05-24T23:59:59.000Z

269

Dealloyed Nanoporous Metals for Energy Storage  

Science Conference Proceedings (OSTI)

Dealloyed Nanoporous Metals for Energy Storage · Design of Light Weight Structure for Wind Turbine Tower by Using Nano-Materials · Development of Highly ...

270

Spin rotation of polarized beams in high energy storage ring  

E-Print Network (OSTI)

The equations for spin evolution of a particle in a storage ring are obtained considering contributions from the tensor electric and magnetic polarizabilities of the particle along with the contributions from spin rotation and birefringence effect in polarized matter of an internal target. % Study of the spin rotation and birefringence effects for a particle in a high energy storage ring provides for measurement both the spin-dependent real part of the coherent elastic zero-angle scattering amplitude and tensor electric (magnetic) polarizabilities.

V. G. Baryshevsky

2006-03-23T23:59:59.000Z

271

Charting the Future of Energy Storage | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Charting the Future of Energy Storage Charting the Future of Energy Storage August 7, 2013 - 2:53pm Addthis Watch the video above to learn how Urban Electric Power is creating a...

272

Thermal energy storage for cogeneration applications  

SciTech Connect

Cogeneration is playing an increasingly important role in providing energy efficient power generation and thermal energy for space heating and industrial process heat applications. However, the range of applications for cogeneration could be further increased if the generation of electricity could be coupled from the generation of process heat. Thermal energy storage (TES) can decouple power generation from the production of process heat, allowing the production of dispatchable power while fully utilizing the thermal energy available from the prime mover. The Pacific Northwest Laboratory (PNL) leads the US Department of Energy's Thermal Energy Storage Program. The program focuses on developing TES for daily cycling (diurnal storage), annual cycling (seasonal storage), and utility applications (utility thermal energy storage (UTES)). Several of these technologies can be used in a cogeneration facility. This paper discusses TES concepts relevant to cogeneration and describes the current status of these TES systems.

Drost, M.K.; Antoniak, Z.I.

1992-04-01T23:59:59.000Z

273

Thermal energy storage for cogeneration applications  

DOE Green Energy (OSTI)

Cogeneration is playing an increasingly important role in providing energy efficient power generation and thermal energy for space heating and industrial process heat applications. However, the range of applications for cogeneration could be further increased if the generation of electricity could be coupled from the generation of process heat. Thermal energy storage (TES) can decouple power generation from the production of process heat, allowing the production of dispatchable power while fully utilizing the thermal energy available from the prime mover. The Pacific Northwest Laboratory (PNL) leads the US Department of Energy's Thermal Energy Storage Program. The program focuses on developing TES for daily cycling (diurnal storage), annual cycling (seasonal storage), and utility applications (utility thermal energy storage (UTES)). Several of these technologies can be used in a cogeneration facility. This paper discusses TES concepts relevant to cogeneration and describes the current status of these TES systems.

Drost, M.K.; Antoniak, Z.I.

1992-04-01T23:59:59.000Z

274

Energy Storage Technology and Application Cost and Performance Data Base-2012: Bulk Energy Storage Systems  

Science Conference Proceedings (OSTI)

This report updates EPRI reports 1020071, Energy Storage Technology and Application Cost and Performance Data Base-2010, and 1021932, Energy Storage Technology and Application Cost and Performance Data Base-2011, which presents 2011 updated data on the cost, performance, and capabilities of energy storage systems only for bulk energy storage applications in a Excel workbook database. The distributed options detailed in the index can be found in the 2011 product, 1021932. The goal of this research was to ...

2012-02-27T23:59:59.000Z

275

Energy Storage Valuation Methodology and Supporting Tool  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ben Kaun Ben Kaun Sr. Project Engineer Electricity Advisory Committee: Storage Valuation Panel 6-6-13 Energy Storage Valuation Methodology and Supporting Tool 2 © 2013 Electric Power Research Institute, Inc. All rights reserved. Electric Power Research Institute (EPRI) * Independent, non-profit, collaborative research institute, with full spectrum electric industry coverage * EPRI members represent ~90% of energy delivered in the U.S. * Energy Storage Research Program has over 30 funding utility members 3 © 2013 Electric Power Research Institute, Inc. All rights reserved. Storage Valuation Can be Confusing! Renewable Integration Frequency Regulation Spinning Reserve Resource Adequacy Asset Utilization Voltage Support Reduced GHG? Lower Production Costs

276

ESS 2012 Peer Review - State & Federal Energy Storage Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

leading U.S. public clean energy programs. ESTAP* Overview Purpose: Create new DOE-state energy storage partnerships and advance energy storage, with technical assistance from...

277

Distribution Categories: Magnetic Fusion Energy (UC-20)  

E-Print Network (OSTI)

Distribution Categories: Magnetic Fusion Energy (UC-20) MFE--Plasma Systems (UC-20a) MFE Temperature Response 4-7 4.6 Thermal Storage Requirements 4-16 4.6.1 Pressurized Water/Steam System 4-19 4

Harilal, S. S.

278

NREL: Vehicles and Fuels Research - Energy Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Research Search More Search Options Site Map NREL's Energy Storage Project is leading the charge on battery thermal management, modeling, and systems solutions to enhance the performance of fuel cell, hybrid electric, and electric vehicles (FCVs, HEVs, and EVs) for a cleaner, more secure transportation future. NREL's experts work closely with the U.S. Department of Energy (DOE), industry, and automotive manufacturers to improve energy storage devices, such as battery modules and ultracapacitors, by enhancing their thermal performance and life-cycle cost. Activities also involve modeling and simulation to evaluate technical targets and energy storage parameters, and investigating combinations of energy storage systems to increase vehicle efficiency. Much of this research is conducted at our state-of-the-art energy storage

279

Energy Harvesting Broadcast Channel with Inefficient Energy Storage  

E-Print Network (OSTI)

Energy Harvesting Broadcast Channel with Inefficient Energy Storage Kaya Tutuncuoglu Aylin Yener with an energy harvesting transmitter equipped with an inefficient energy storage device. For this setting by the energy harvesting process. The convexity of the capacity region for the energy harvesting broadcast

Yener, Aylin

280

Hydrogen/halogen energy storage system  

DOE Green Energy (OSTI)

The hydrogen/chlorine energy storage system has been considered at BNL for large scale energy storage. In FY1978 work included an assessment of system safety and cost, investigations of cell performance under conditions elevated pressure and temperature, determination of the transport properties of Nafion membranes and electrochemical engineering studies. Results are summarized.

Spaziante, P M; Sioli, G C; Trotta, R; Perego, A; McBreen, J

1978-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Energy Storage Integration Council (ESIC): 2013 Update  

Science Conference Proceedings (OSTI)

Recent electric energy storage deployments have encountered several challenges, including problems stemming from poor system integration, grid integration difficulties, insufficient factory testing and qualification, safety and reliability issues, and inadequate common test protocols. The utility industry needs clear requirements developed so vendors can manufacture cost-effective energy storage products to support the generation, transmission, and distribution system. To address these and related ...

2013-12-26T23:59:59.000Z

282

Mechanical energy storage in carbon nanotube springs  

E-Print Network (OSTI)

Energy storage in mechanical springs made of carbon nanotubes is a promising new technology. Springs made of dense, ordered arrays of carbon nanotubes have the potential to surpass both the energy density of electrochemical ...

Hill, Frances Ann

2011-01-01T23:59:59.000Z

283

Permanent Magnets for Energy Applications  

Science Conference Proceedings (OSTI)

Mar 13, 2012 ... Magnetic Materials for Energy Applications II: Permanent Magnets for ... to 500% in the last 12 months, the most unstable being the price of Dy.

284

Batteries and Energy Storage | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

The Joint Center for Energy Storage Research (JCESR) is a major research The Joint Center for Energy Storage Research (JCESR) is a major research partnership that integrates government, academic and industrial researchers from many disciplines to overcome critical scientific and technical barriers and create new breakthrough energy storage technology. Batteries and Energy Storage Argonne's all- encompassing battery research program spans the continuum from basic materials research and diagnostics to scale-up processes and ultimate deployment by industry. At Argonne, our multidisciplinary team of world-renowned researchers are working in overdrive to develop advanced energy storage technologies to aid the growth of the U.S. battery manufacturing industry, transition the U.S. automotive fleet to plug-in hybrid and electric vehicles, and enable

285

The Energy Harvesting Multiple Access Channel with Energy Storage Losses  

E-Print Network (OSTI)

The Energy Harvesting Multiple Access Channel with Energy Storage Losses Kaya Tutuncuoglu and Aylin considers a Gaussian multiple access channel with two energy harvesting transmitters with lossy energy storage. The power allocation policy maximizing the average weighted sum rate given the energy harvesting

Yener, Aylin

286

New York's Energy Storage System Gets Recharged | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

York's Energy Storage System Gets Recharged York's Energy Storage System Gets Recharged New York's Energy Storage System Gets Recharged August 2, 2010 - 1:18pm Addthis Matt Rogers, Senior Advisor to Secretary Chu, explain why grid frequency regulation matters Jonathan Silver Jonathan Silver Executive Director of the Loan Programs Office What does this mean for me? AES Storage in New York got a $17.1M conditional loan guarantee to provide a more stable transmission grid. When thinking of clean technologies, energy storage might not be the first thing to come to mind, but with a $17.1 million conditional commitment for a loan guarantee from the Department of Energy AES Energy Storage will develop a battery-based energy storage system to provide a more stable and efficient electrical grid for New York State's high-voltage transmission

287

Energy Storage Program Planning Document | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Program Planning Document Energy Storage Program Planning Document Energy Storage Program Planning Document Energy storage systems have the potential to extend and optimize the operating capabilities of the grid, since power can be stored and used at a later time. This allows for flexibility in generation and distribution, improving the economic efficiency and utilization of the entire system while making the grid more reliable and robust. Additionally, alternatives to traditional power generation, including variable wind and solar energy technologies, may require back-up power storage. Thus, modernizing the power grid may require a substantial volume of electrical energy storage (EES). Energy Storage Program Planning Document More Documents & Publications CX-010738: Categorical Exclusion Determination

288

Energy Storage Program Planning Document | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Program Planning Document Energy Storage Program Planning Document Energy Storage Program Planning Document Energy storage systems have the potential to extend and optimize the operating capabilities of the grid, since power can be stored and used at a later time. This allows for flexibility in generation and distribution, improving the economic efficiency and utilization of the entire system while making the grid more reliable and robust. Additionally, alternatives to traditional power generation, including variable wind and solar energy technologies, may require back-up power storage. Thus, modernizing the power grid may require a substantial volume of electrical energy storage (EES). Energy Storage Program Planning Document More Documents & Publications CX-008689: Categorical Exclusion Determination

289

Underground Energy Storage Program. 1984 annual summary  

DOE Green Energy (OSTI)

Underground Energy Storage (UES) Program activities during the period from April 1984 through March 1985 are briefly described. Primary activities in seasonal thermal energy storage (STES) involved field testing of high-temperature (>100/sup 0/C (212/sup 0/F)) aquifer thermal energy storage (ATES) at St. Paul, laboratory studies of geochemical issues associated with high-temperatures ATES, monitoring of chill ATES facilities in Tuscaloosa, and STES linked with solar energy collection. The scope of international activities in STES is briefly discussed.

Kannberg, L.D.

1985-06-01T23:59:59.000Z

290

Energy Storage Systems 2012 Peer Review Presentations - Day 1...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Systems 2012 Peer Review Presentations - Day 1, Session 2 Energy Storage Systems 2012 Peer Review Presentations - Day 1, Session 2 The U.S. DOE Energy Storage...

291

ENERGY STORAGE IN AQUIFERS - - A SURVEY OF RECENT THEORETICAL STUDIES  

E-Print Network (OSTI)

underground thermal energy storage. In Proc. Th~rmal1980), 'I'hermal energy storage? in a confined aquifer·--al modeling of thermal energy storage in aquifers. In ~~-

Tsang, Chin Fu

2013-01-01T23:59:59.000Z

292

Fact Sheet: Grid-Scale Flywheel Energy Storage Plant | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flywheel Energy Storage Plant Fact Sheet: Grid-Scale Flywheel Energy Storage Plant Beacon Power will design, build, and operate a utility-scale 20 MW flywheel energy storage plant...

293

EXPERIMENTAL AND THEORETICAL STUDIES OF THERMAL ENERGY STORAGE IN AQUIFERS  

E-Print Network (OSTI)

In Proceed- ings of Thermal Energy Storage in Aquifers Work-Mathematical Modeling of Thermal Energy storage in Aquifers.In Proceed- ings of Thermal Energy Storage in Aquifers Work-

Tsang, Chin Fu

2011-01-01T23:59:59.000Z

294

Energy Department Releases Grid Energy Storage Report | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Releases Grid Energy Storage Report Releases Grid Energy Storage Report Energy Department Releases Grid Energy Storage Report December 12, 2013 - 9:48am Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - As part of the Obama Administration's commitment to a cleaner, more secure energy future, Energy Secretary Ernest Moniz today released the Energy Department's Grid Energy Storage report to the members of the Senate Energy and Natural Resources Committee. The report was commissioned at the request of Senator Ron Wyden, Committee Chairman. The report identifies the benefits of grid energy storage, the challenges that must be addressed to enable broader use, and the efforts of the Energy Department, in conjunction with industry and other government organizations, to meet those challenges.

295

Energy Department Releases Grid Energy Storage Report | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Releases Grid Energy Storage Report Releases Grid Energy Storage Report Energy Department Releases Grid Energy Storage Report December 12, 2013 - 9:48am Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - As part of the Obama Administration's commitment to a cleaner, more secure energy future, Energy Secretary Ernest Moniz today released the Energy Department's Grid Energy Storage report to the members of the Senate Energy and Natural Resources Committee. The report was commissioned at the request of Senator Ron Wyden, Committee Chairman. The report identifies the benefits of grid energy storage, the challenges that must be addressed to enable broader use, and the efforts of the Energy Department, in conjunction with industry and other government organizations, to meet those challenges.

296

Solar applications of thermal energy storage. Final report  

DOE Green Energy (OSTI)

A technology assessment is presented on solar energy systems which use thermal energy storage. The study includes characterization of the current state-of-the-art of thermal energy storage, an assessment of the energy storage needs of solar energy systems, and the synthesis of this information into preliminary design criteria which would form the basis for detailed designs of thermal energy storage. (MHR)

Lee, C.; Taylor, L.; DeVries, J.; Heibein, S.

1979-01-01T23:59:59.000Z

297

POWER SUPPLIES FOR THE BENDING MAGNETS OF THE BEP AND VEPP-2000 STORAGE RING  

E-Print Network (OSTI)

transformer (2) are located closely to the BEP ring. The power part of each thyristor module (Fig.2) consistsPOWER SUPPLIES FOR THE BENDING MAGNETS OF THE BEP AND VEPP-2000 STORAGE RING S.S. Vasichev, V of the collider. The beam energy change lead to the necessity to develop new power supplies for the main field

Kozak, Victor R.

298

Energy Storage Systems 2012 Peer Review Presentations - Poster...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Home Energy Storage Systems 2012 Peer Review Presentations - Poster Session 1 (Day 1): National Lab Projects Energy Storage Systems 2012 Peer Review Presentations - Poster...

299

Energy Storage Solutions Industrial Symposium | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage Solutions Industrial Symposium Sep 04 2013 09:00 AM - 05:30 PM Energy Storage Solutions Industrial Symposium - Wednesday September 4, 2013 CONTACT : Email: Phone:...

300

Energy Storage Systems 2007 Peer Review - Economics Presentations...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Economics Presentations Energy Storage Systems 2007 Peer Review - Economics Presentations The U.S. DOE Energy Storage Systems Program (ESS) held an annual peer review on September...

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Fact Sheet: Energy Storage Testing and Validation (October 2012...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Testing and Validation (October 2012) Fact Sheet: Energy Storage Testing and Validation (October 2012) At Sandia National Laboratories, the Energy Storage Analysis Laboratory, in...

302

ARPA-E Announces $43 Million for Transformational Energy Storage...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

43 Million for Transformational Energy Storage Projects to Advance Electric Vehicle and Grid Technologies ARPA-E Announces 43 Million for Transformational Energy Storage Projects...

303

300kW Energy Storage Demonstration Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

kW Energy Storage Demonstration Project Technical Overview Presented at: Annual Doe Peer Review Meeting 2008 DOE Energy Storage & Power Electronics Research Programs By Ib I....

304

Energy Storage Systems 2007 Peer Review - Power Electronics Presentati...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Power Electronics Presentations Energy Storage Systems 2007 Peer Review - Power Electronics Presentations The U.S. DOE Energy Storage Systems Program (ESS) held an annual peer...

305

Fact Sheet: Isothermal Compressed Air Energy Storage (October...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Isothermal Compressed Air Energy Storage (October 2012) Fact Sheet: Isothermal Compressed Air Energy Storage (October 2012) SustainX will demonstrate an isothermal compressed air...

306

Energy Storage Systems 2007 Peer Review - Utility & Commercial...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utility & Commercial Applications Presentations Energy Storage Systems 2007 Peer Review - Utility & Commercial Applications Presentations The U.S. DOE Energy Storage Systems...

307

Energy Storage & Power Electronics 2008 Peer Review - Agenda...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AgendaPresentation List Energy Storage & Power Electronics 2008 Peer Review - AgendaPresentation List The 2008 Peer Review Meeting for the DOE Energy Storage and Power...

308

FY06 DOE Energy Storage Program PEER Review  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 DOE Energy Storage and Power Electronics Program (ESPE) PEER Review FY08 DOE Energy Storage and Power Electronics Program (ESPE) PEER Review John D. Boyes Sandia National...

309

2012 Transmission and Energy Storage Peer Review Presentations...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transmission and Energy Storage Peer Review Presentations Available 2012 Transmission and Energy Storage Peer Review Presentations Available December 3, 2012 - 1:26pm Addthis...

310

Energy Storage Systems 2006 Peer Review - Day 2 morning presentations...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 Peer Review - Day 2 morning presentations Energy Storage Systems 2006 Peer Review - Day 2 morning presentations The 2006 Peer Review Meeting for the DOE Energy Storage Systems...

311

Model Predictive Control of Thermal Energy Storage in Building...  

NLE Websites -- All DOE Office Websites (Extended Search)

Model Predictive Control of Thermal Energy Storage in Building Cooling Systems Title Model Predictive Control of Thermal Energy Storage in Building Cooling Systems Publication Type...

312

SunShot Initiative: Innovative Phase Change Thermal Energy Storage...  

NLE Websites -- All DOE Office Websites (Extended Search)

Innovative Phase Change Thermal Energy Storage Solution for Baseload Power to someone by E-mail Share SunShot Initiative: Innovative Phase Change Thermal Energy Storage Solution...

313

Poster: Thermal Energy Storage for Electricity Peak-demand Mitigation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Poster: Thermal Energy Storage for Electricity Peak-demand Mitigation: A Solution in Developing and Developed World Alike Title Poster: Thermal Energy Storage for Electricity...

314

Transmission and Energy Storage Peer Review Presentations Available...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transmission and Energy Storage Peer Review Presentations Available Transmission and Energy Storage Peer Review Presentations Available December 3, 2012 - 1:26pm Addthis...

315

SunShot Initiative: Innovative Thermal Energy Storage for Baseload...  

NLE Websites -- All DOE Office Websites (Extended Search)

Innovative Thermal Energy Storage for Baseload Solar Power Generation to someone by E-mail Share SunShot Initiative: Innovative Thermal Energy Storage for Baseload Solar Power...

316

Energy Storage Valuation Tool (ESVT) Version 3.1  

Science Conference Proceedings (OSTI)

The Energy Storage Valuation Tool (ESVT) Version 3.1 is an energy storage cost-benefit analysis simulation tool, based on ...

2013-04-01T23:59:59.000Z

317

ESS 2012 Peer Review - Energy Storage Program Overview - Ross...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PUC Regulatory Guidebook for Energy Storage National Needs and Successes Providing energy storage information and analysis to public, utilities, partners and decision makers...

318

Fact Sheet: Energy Storage Database (October 2012)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sandia National Laboratories Sandia National Laboratories List of projects, including technology details and status Interactive map of search result project locations Multiple sort options (e.g., state, type, size) to ease navigation Energy storage projects and policies across the United States are rapidly evolving and expanding. A publicly accessible central archive is increasingly essential to document these developments; to facilitate future projects; and to ease cross-sector, national, and international coordination. The U.S. Department of Energy (DOE) and Sandia National Laboratories contracted Strategen Consulting LLC to develop a database of energy storage projects and policies. When completed, the database will present current information about energy storage projects worldwide and U.S. energy storage policy in an easy-to-use and intuitive format. The database will be research-grade, unbiased,

319

Integrated Building Energy Systems Design Considering Storage  

E-Print Network (OSTI)

the fact that the off-peak power plant might be coal and substitute "clean" on- peak natural gas plants@lbl.gov Keywords Combined heat and power, CO2 emissions, demand response, electric storage, energy efficiency, heat storage, micro-generation systems, photovoltaic, software, solar thermal systems Abstract The addition

320

FACTS With Energy Storage: Conceptual Design Study  

Science Conference Proceedings (OSTI)

Inverter-type FACTS controllers are able to independently exchange controllable real and reactive power with the ac power system when coupled to an energy storage device. Combining storage with FACTS may result in more flexible application of the technology and a better cost-benefits ratio.

1999-12-07T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Spin flip loss in magnetic storage of ultracold neutrons  

E-Print Network (OSTI)

We analyze the depolarization of ultracold neutrons confined in a magnetic field configuration similar to those used in existing or proposed magneto-gravitational storage experiments aiming at a precise measurement of the neutron lifetime. We use an approximate quantum mechanical analysis such as pioneered by Walstrom \\emph{et al} [Nucl. Instrum. Methods Phys. Res. A 599, 82 (2009)]. Our analysis is not restricted to purely vertical modes of neutron motion. The lateral motion is shown to cause the predominant depolarization loss in a magnetic storage trap.

A. Steyerl; C. Kaufman; G. Müller; S. S. Malik; A. M. Desai

2013-07-19T23:59:59.000Z

322

University of Arizona Compressed Air Energy Storage  

SciTech Connect

Boiled down to its essentials, the grant’s purpose was to develop and demonstrate the viability of compressed air energy storage (CAES) for use in renewable energy development. While everyone agrees that energy storage is the key component to enable widespread adoption of renewable energy sources, the development of a viable scalable technology has been missing. The Department of Energy has focused on expanded battery research and improved forecasting, and the utilities have deployed renewable energy resources only to the extent of satisfying Renewable Portfolio Standards. The lack of dispatchability of solar and wind-based electricity generation has drastically increased the cost of operation with these components. It is now clear that energy storage coupled with accurate solar and wind forecasting make up the only combination that can succeed in dispatchable renewable energy resources. Conventional batteries scale linearly in size, so the price becomes a barrier for large systems. Flow batteries scale sub-linearly and promise to be useful if their performance can be shown to provide sufficient support for solar and wind-base electricity generation resources. Compressed air energy storage provides the most desirable answer in terms of scalability and performance in all areas except efficiency. With the support of the DOE, Tucson Electric Power and Science Foundation Arizona, the Arizona Research Institute for Solar Energy (AzRISE) at the University of Arizona has had the opportunity to investigate CAES as a potential energy storage resource.

Simmons, Joseph; Muralidharan, Krishna

2012-12-31T23:59:59.000Z

323

Underground Storage Tank Regulations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Underground Storage Tank Regulations Underground Storage Tank Regulations Underground Storage Tank Regulations < Back Eligibility Agricultural Commercial Construction Developer Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Program Info State Mississippi Program Type Environmental Regulations Siting and Permitting Provider Department of Environmental Quality The Underground Storage Tank Regulations is relevant to all energy projects

324

Energy storage technology-environmental implications of large scale utilization  

SciTech Connect

Environmental impacts for several energy storage technologies have been identified. State-of-the-art control technology options were similarly identified. Recommendations for research and development on new control technology were made where present controls were either deemed inadequate or non-existent. Specifically, the energy storage technologies under study included: advanced lead-acid battery, compressed air, underground pumped hydroelectric, flywheel, superconducting magnet and various thermal systems (sensible, latent heat and reversible chemical reaction). In addition, a preliminary study was conducted on fuel cell technology. Although not strictly classified as an energy storage system, fuel cells in conjunction with product recycling units can serve an energy storage function. A very large number of potential environmental impacts can be identified for all of these technologies. However, not all are of primary importance. Detailed discussions of a number of environmental impacts from the latest LASL study as they relate to primarily operational situations are emphasized. In addition, a brief discussion on new application for energy storage technologies and the additional costs of controls to be used for mitigation of specific impacts are also presented.

Krupka, M.C.; Moore, J.E.; Keller, W.E.; Baca, G.A.; Brasier, R.I.; Bennett, W.S.

1979-01-01T23:59:59.000Z

325

Value of Energy Storage for Grid Applications  

DOE Green Energy (OSTI)

This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This operational value of storage was estimated for devices of various sizes, providing different services, and with several sensitivities to fuel price and other factors. Overall, the results followed previous analyses that demonstrate relatively low value for load-leveling but greater value for provision of reserve services. The value was estimated by taking the difference in operational costs between cases with and without energy storage and represents the operational cost savings from deploying storage by a traditional vertically integrated utility. The analysis also estimated the potential revenues derived from a merchant storage plant in a restructured market, based on marginal system prices. Due to suppression of on-/off-peak price differentials and incomplete capture of system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit provided to the system. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

Denholm, P.; Jorgenson, J.; Hummon, M.; Jenkin, T.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M.

2013-05-01T23:59:59.000Z

326

Compressed air energy storage system  

DOE Patents (OSTI)

An internal combustion reciprocating engine is operable as a compressor during slack demand periods utilizing excess power from a power grid to charge air into an air storage reservoir and as an expander during peak demand periods to feed power into the power grid utilizing air obtained from the air storage reservoir together with combustible fuel. Preferably the internal combustion reciprocating engine is operated at high pressure and a low pressure turbine and compressor are also employed for air compression and power generation.

Ahrens, Frederick W. (Naperville, IL); Kartsounes, George T. (Naperville, IL)

1981-01-01T23:59:59.000Z

327

Use of superconductive technology for energy storage and power transmission for large power systems: power parks  

DOE Green Energy (OSTI)

A general review and technology assessment of superconducting magnets for energy storage and superconducting cables for power transmission are presented. It is concluded that the technology is now available for applying superconductivity in the power industry. (TFD)

Keller, W.E.

1977-01-01T23:59:59.000Z

328

Electrochemical Energy Storage Technical Team Roadmap  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochemical Energy Storage Electrochemical Energy Storage Technical Team Roadmap June 2013 This roadmap is a document of the U.S. DRIVE Partnership. U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy sustainability) is a voluntary, non-binding, and nonlegal partnership among the U.S. Department of Energy; USCAR, representing Chrysler Group LLC, Ford Motor Company, and General Motors; Tesla Motors; five energy companies - BP America, Chevron Corporation, Phillips 66 Company, ExxonMobil Corporation, and Shell Oil Products US; two utilities - Southern California Edison and DTE Energy; and the Electric Power Research Institute (EPRI). The Electrochemical Energy Storage Technical Team is one of 12 U.S. DRIVE technical teams ("tech teams") whose mission is to accelerate the development of pre-competitive and innovative technologies to

329

Using Alternative Energy Storage in UPS Applications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Data Management for Data Management for CEC/DOE Energy Storage Demonstration Project Work performed under contract with Sandia National Labs Garth Corey Project Manager Project funded by the US DOE ESS Program Dr. Imre Gyuk, Program Manager Presented by Doug Dorr ESI Project Manager ddorr@eprisolutions.com 2 Presentation Outline  Project Overview and Objectives  Data acquisition status for the demonstration projects  Updates to the Energy Storage Initiative Website  Examples of Website Data Analysis 3 Project Overview and Objectives  Promote New Energy Storage Technologies that can achieve California's long range energy goals:  Increased energy utilization efficiency  Reduced demand for out of state energy procurement  Reduced overall energy costs to consumers

330

NREL: Energy Storage - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us Partnering with industry, government, and universities is key to developing affordable energy storage technology and moving it into the marketplace and the U.S. economy. In collaboration with our diverse partners, we use thermal management and modeling and analysis from a vehicle systems perspective to improve energy storage devices. Much of our research is conducted at the state-of-the-art energy storage laboratory, in Golden, Colorado. There are a variety of ways to become involved with NREL's Energy Storage activities: NREL's Partnering Agreements Work collaboratively with NREL through a variety of Technology Partnership Agreements. We can help you select the most appropriate agreement for your research project. Gain access to NREL's expertise and specialized research facilities through

331

THERMAL ENERGY STORAGE IN AQUIFERS WORKSHOP  

E-Print Network (OSTI)

and J. Schwarz, Survey of Thermal Energy Storage in AquifersA. 1957. Steady State Free Thermal Convection of Liquid in a1958. An Experiment on Free Thermal Convection of Water in

Authors, Various

2011-01-01T23:59:59.000Z

332

Energy Storage Systems 2005 Peer Review  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. DOE Energy Storage Systems Program (ESS) held an annual peer review on October 20, 2005 in San Francisco, CA. The agenda and ESS program overview presentation are below.

333

Why Systems Analysis for Energy Storage?  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cost Effectiveness Evaluation, Cost Effectiveness Evaluation, DNV KEMA Modeling for CPUC Energy Storage Proceeding Energy Storage Panel, EAC Meeting June 6, 2013 Common Pitfalls  Using historical prices - Prices are likely to change due to rule modifications, changes in regulation supply resources over time, changes in regulation needs over time - Depending on the amount of storage added to the market, the introduction of storage can change market prices  Modeling deterministic behavior (perfect performance assuming knowledge of upcoming prices) - Future prices are unknown and actual revenues will likely not reflect strategy that gets maximum revenue 100% of the time  Ignoring system effects - In addition to affecting prices, certain amounts of storage can affect imports/exports

334

Distributed Energy Storage Product Reference Guide  

Science Conference Proceedings (OSTI)

Distribution-scale energy storage deployments have increased significantly in the last few years. These deployments have resulted in several lessons learned, and have pointed out the need for standardization and development of common industry agreed approaches to grid-scale energy storage deployments. This report documents the progress in many of these deployments and summarizes the lessons learned. In addition, the report presents a brief update on a PNNL/Sandia-lead multi stakeholder pre-standard ...

2013-12-17T23:59:59.000Z

335

Acoustic Energy Storage in Single Bubble Sonoluminescence  

E-Print Network (OSTI)

Single bubble sonoluminescence is understood in terms of a shock focusing towards the bubble center. We present a mechanism for significantly enhancing the effect of shock focusing, arising from the storage of energy in the acoustic modes of the gas. The modes with strongest coupling are not spherically symmetric. The storage of acoustic energy gives a framework for understanding how light intensities depend so strongly on ambient gases and liquids and suggests that the light intensities of successive flashes are highly correlated.

Michael P. Brenner; Sascha Hilgenfeldt; Detlef Lohse; Rodolfo R. Rosales

1996-05-07T23:59:59.000Z

336

Distributed Energy Storage Systems: Deployments and Learnings  

Science Conference Proceedings (OSTI)

Distributed Energy Storage Systems (DESS) or so-called “edge-of-grid” systems are small scale energy storage systems that are positioned at the edge of the distribution grid, downstream of the distribution transformer, on the utility side of the meter. These systems have the potential to significantly improve power quality for the consumer, while also having the capability to provide distribution system support. Several field trials of these systems are presently underway or are being ...

2012-12-31T23:59:59.000Z

337

Energy Storage and Distributed Generation Technology Assessment  

Science Conference Proceedings (OSTI)

Energy storage continues to hold a great deal of interest to utilities and other stakeholders in the electric power enterprise. Storage can be used to shift load or energy from one time to another, to provide ancillary services and grid support, and is an enabling technology for smart grid technologies. This report investigates the current state of the art of advanced lead-acid batteries and zinc-air batteries, specifically where pertinent to stationary applications. It focuses on those developments and ...

2009-12-22T23:59:59.000Z

338

Advanced Magnetic Materials for Next Generation Data Storage ...  

Science Conference Proceedings (OSTI)

All Solid State 2-Dimensional Li Battery · Alloy Design and ... Rare-Earth Magnets · Challenge to Development of Diamond Power Devices for Saving Energy.

339

Transportation Storage Interface | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storage Interface Transportation Storage Interface Regulation of Future Extended Storage and Transportation. Transportation Storage Interface More Documents & Publications Status...

340

Solar energy thermalization and storage device  

DOE Patents (OSTI)

A passive solar thermalization and thermal energy storage assembly which is visually transparent. The assembly consists of two substantial parallel, transparent wall members mounted in a rectangular support frame to form a liquid-tight chamber. A semitransparent thermalization plate is located in the chamber, substantially paralled to and about equidistant from the transparent wall members to thermalize solar radiation which is stored in a transparent thermal energy storage liquid which fills the chamber. A number of the devices, as modules, can be stacked together to construct a visually transparent, thermal storage wall for passive solar-heated buildings.

McClelland, John F. (Ames, IA)

1981-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

ESS 2012 Peer Review - International Energy Storage Database...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Database Janice Lin Site Admin: storage.exchange@strategen.com; 510-665-7811 Special thanks to the DOE Energy Storage Program and Dr. Imre Gyuk US Department of...

342

PNNL Solving the Energy Storage Challenge | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PNNL Solving the Energy Storage Challenge PNNL Solving the Energy Storage Challenge PNNL Solving the Energy Storage Challenge January 14, 2011 - 12:41pm Addthis PNNL teamed up with Northwest Public Television to produce a video on their effort on energy storage, "Saving the Sun for a Rainy Day." Niketa Kumar Niketa Kumar Public Affairs Specialist, Office of Public Affairs What does this mean for me? In order to maintain reliability from renewables, energy must be stored for when power cannot be generated -- a challenge that PNNL is working on. In conversations about renewable energy sources like solar and wind - whether here at the Energy Department or among industry leaders, scientists and students - energy storage is repeatedly identified as the tipping point between intermittency and reliability.

343

ENERGY EFFICIENCY AND ENVIRONMENTALLY FRIENDLY DISTRIBUTED ENERGY STORAGE BATTERY  

SciTech Connect

Electro Energy, Inc. conducted a research project to develop an energy efficient and environmentally friendly bipolar Ni-MH battery for distributed energy storage applications. Rechargeable batteries with long life and low cost potentially play a significant role by reducing electricity cost and pollution. A rechargeable battery functions as a reservoir for storage for electrical energy, carries energy for portable applications, or can provide peaking energy when a demand for electrical power exceeds primary generating capabilities.

LANDI, J.T.; PLIVELICH, R.F.

2006-04-30T23:59:59.000Z

344

Integrated solar energy harvesting and storage  

Science Conference Proceedings (OSTI)

To explore integrated solar energy harvesting as a power source for low power systems, an array of energy scavenging photodiodes based on a passive-pixel architecture for CMOS imagers has been fabricated together with storage capacitors implemented using ... Keywords: energy harvesting, low-power design, photodiodes

Nathaniel J. Guilar; Travis J. Kleeburg; Albert Chen; Diego R. Yankelevich; Rajeevan Amirtharajah

2009-05-01T23:59:59.000Z

345

Redox Flow Batteries for Grid-scale Energy Storage - Energy ...  

Though considered a promising large-scale energy storage device, the real-world deployment of redox flow batteries has been limited by their inability ...

346

Energy storage systems cost update : a study for the DOE Energy Storage Systems Program.  

DOE Green Energy (OSTI)

This paper reports the methodology for calculating present worth of system and operating costs for a number of energy storage technologies for representative electric utility applications. The values are an update from earlier reports, categorized by application use parameters. This work presents an update of energy storage system costs assessed previously and separately by the U.S. Department of Energy (DOE) Energy Storage Systems Program. The primary objective of the series of studies has been to express electricity storage benefits and costs using consistent assumptions, so that helpful benefit/cost comparisons can be made. Costs of energy storage systems depend not only on the type of technology, but also on the planned operation and especially the hours of storage needed. Calculating the present worth of life-cycle costs makes it possible to compare benefit values estimated on the same basis.

Schoenung, Susan M. (Longitude 122 West, Menlo Park, CA)

2011-04-01T23:59:59.000Z

347

Magnetic Imaging  

Science Conference Proceedings (OSTI)

... data-storage and permanent magnets with increased energy products, in ... Optimization of future materials, including improved yields, requires an ...

2012-10-02T23:59:59.000Z

348

Hydrogen-based electrochemical energy storage  

DOE Patents (OSTI)

An energy storage device (100) providing high storage densities via hydrogen storage. The device (100) includes a counter electrode (110), a storage electrode (130), and an ion conducting membrane (120) positioned between the counter electrode (110) and the storage electrode (130). The counter electrode (110) is formed of one or more materials with an affinity for hydrogen and includes an exchange matrix for elements/materials selected from the non-noble materials that have an affinity for hydrogen. The storage electrode (130) is loaded with hydrogen such as atomic or mono-hydrogen that is adsorbed by a hydrogen storage material such that the hydrogen (132, 134) may be stored with low chemical bonding. The hydrogen storage material is typically formed of a lightweight material such as carbon or boron with a network of passage-ways or intercalants for storing and conducting mono-hydrogen, protons, or the like. The hydrogen storage material may store at least ten percent by weight hydrogen (132, 134) at ambient temperature and pressure.

Simpson, Lin Jay

2013-08-06T23:59:59.000Z

349

Webinar Presentation: Energy Storage Solutions for Microgrids (November  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Presentation: Energy Storage Solutions for Microgrids Presentation: Energy Storage Solutions for Microgrids (November 2012) Webinar Presentation: Energy Storage Solutions for Microgrids (November 2012) On November 7, 2012, Clean Energy States Aliance (CESA) hosted a webinar with Connecticut DEEP in conjuction with Sandia National Lab and DOE on State and Federal Energy Storage Technology Partnership (ESTAP). The four guest speakers were Veronica Szczerkowski (CT DEEP), Imre Gyuk (DOE), Matt Lazarewicz (CESA consultant), and Dan Borneo (Sandia). The combined presentations are available below. Webinar Presentation: Energy Storage Solutions for Microgrids (November 2012) More Documents & Publications Energy Storage Systems 2012 Peer Review Presentations - Day 3, Session 1 Fact Sheet: Energy Storage Technology Advancement Partnership (October

350

Energy Storage Fuel Cell Vehicle Analysis  

DOE Green Energy (OSTI)

In recent years, hydrogen fuel cell (FC) vehicle technology has received considerable attention as a strategy to decrease oil consumption and reduce harmful emissions. However, the cost, transient response, and cold performance of FC systems may present significant challenges to widespread adoption of the technology for transportation in the next 15 years. The objectives of this effort were to perform energy storage modeling with fuel cell vehicle simulations to quantify the benefits of hybridization and to identify a process for setting the requirements of ES for hydrogen-powered FC vehicles for U.S. Department of Energy?s Energy Storage Program.

Pesaran, A.; Markel, T.; Zolot, M.; Sprik, S.; Tataria, H.; Duong, T.

2005-08-01T23:59:59.000Z

351

Energy storage for hybrid remote power systems  

DOE Green Energy (OSTI)

Energy storage can be a cost-effective component of hybrid remote power systems. Storage serves the special role of taking advantage of intermittent renewable power sources. Traditionally this role has been played by lead-acid batteries, which have high life-cycle costs and pose special disposal problems. Hydrogen or zinc-air storage technologies can reduce life-cycle costs and environmental impacts. Using projected data for advanced energy storage technologies, LLNL ran an optimization for a hypothetical Arctic community with a reasonable wind resource (average wind speed 8 m/s). These simulations showed the life-cycle annualized cost of the total energy system (electric plus space heating) might be reduced by nearly 40% simply by adding wind power to the diesel system. An additional 20 to 40% of the wind-diesel cost might be saved by adding hydrogen storage or zinc-air fuel cells to the system. Hydrogen produced by electrolysis of water using intermittent, renewable power provides inexpensive long-term energy storage. Conversion back to electricity with fuel cells can be accomplished with available technology. The advantages of a hydrogen electrolysis/fuel cell system include low life-cycle costs for long term storage, no emissions of concern, quiet operation, high reliability with low maintenance, and flexibility to use hydrogen as a direct fuel (heating, transportation). Disadvantages include high capital costs, relatively low electrical turn-around efficiency, and lack of operating experience in utility settings. Zinc-air fuel cells can lower capital and life-cycle costs compared to hydrogen, with most of the same advantages. Like hydrogen systems, zinc-air technology promises a closed system for long-term storage of energy from intermittent sources. The turn around efficiency is expected to exceed 60%, while use of waste heat can potentially increase overall energy efficiency to over 80%.

Isherwood, W., LLNL

1998-03-01T23:59:59.000Z

352

Superconducting energy storage development for electric utility systems  

DOE Green Energy (OSTI)

Model SMES experiments performed at LASL show that magnetic energy storage in a superconducting magnet is a viable alternate to energy storage methods which are being built today. It is a fast responding device, i.e., milliseconds, and efficient method which does not require electric energy be converted to mechanical form for storage. Component tests on a model SMES system include 12 pulse converter, automatic and manual converter power control system, and high current superconductors have been performed to evaluate and develop systems which could be used on the 100 MJ SMES system that has been designed. Test circuits have been designed and used for economical and nondestructive testing of magnets for superconductor performance and evaluation. A closed-loop model SMES system has been developed and built to study the electrical characteristics of the system. Initial test results were obtained for a symmetrically and asymmetrically triggered twelve-pulse converter. The asymmetrically triggered bridge shows the lower reactive power requirement, but a more distorted line current. Future converter tests and studies will be required to clearly identify the better circuit. A converter optimization study will include an evaluation of costs for harmonic filtering and power factor correction. Tests with the automatic control system show that a SMES system has switching times between the charging and discharging mode of about a cycle and a half. This makes the system very attractive for power system stabilization.

Turner, R.D.; Boenig, H.J.; Hassenzahl, W.V.

1976-01-01T23:59:59.000Z

353

Kauai Island Utility Cooperative energy storage study.  

DOE Green Energy (OSTI)

Sandia National Laboratories performed an assessment of the benefits of energy storage for the Kauai Island Utility Cooperative. This report documents the methodology and results of this study from a generation and production-side benefits perspective only. The KIUC energy storage study focused on the economic impact of using energy storage to shave the system peak, which reduces generator run time and consequently reduces fuel and operation and maintenance (O&M) costs. It was determined that a 16-MWh energy storage system would suit KIUC's needs, taking into account the size of the 13 individual generation units in the KIUC system and a system peak of 78 MW. The analysis shows that an energy storage system substantially reduces the run time of Units D1, D2, D3, and D5 - the four smallest and oldest diesel generators at the Port Allen generating plant. The availability of stored energy also evens the diurnal variability of the remaining generation units during the off- and on-peak periods. However, the net economic benefit is insufficient to justify a load-leveling type of energy storage system at this time. While the presence of storage helps reduce the run time of the smaller and older units, the economic dispatch changes and the largest most efficient unit in the KIUC system, the 27.5-MW steam-injected combustion turbine at Kapaia, is run for extra hours to provide the recharge energy for the storage system. The economic benefits of the storage is significantly reduced because the charging energy for the storage is derived from the same fuel source as the peak generation source it displaces. This situation would be substantially different if there were a renewable energy source available to charge the storage. Especially, if there is a wind generation resource introduced in the KIUC system, there may be a potential of capturing the load-leveling benefits as well as using the storage to dampen the dynamic instability that the wind generation could introduce into the KIUC grid. General Electric is presently conducting such a study and results of this study will be available in the near future. Another study conducted by Electric Power Systems, Inc. (EPS) in May 2006 took a broader approach to determine the causes of KIUC system outages. This study concluded that energy storage with batteries will provide stability benefits and possibly eliminate the load shedding while also providing positive voltage control. Due to the lack of fuel diversity in the KIUC generation mix, SNL recommends that KIUC continue its efforts to quantify the dynamic benefits of storage. The value of the dynamic benefits, especially as an enabler of renewable generation such as wind energy, may be far greater than the production cost benefits alone. A combination of these benefits may provide KIUC sufficient positive economic and operational benefits to implement an energy storage project that will contribute to the overall enhancement of the KIUC system.

Akhil, Abbas Ali; Yamane, Mike (Kauai Island Utility Cooperative, Lihu'e, HI); Murray, Aaron T.

2009-06-01T23:59:59.000Z

354

Definition: Electricity Storage Technologies | Open Energy Information  

Open Energy Info (EERE)

Dictionary.png Dictionary.png Electricity Storage Technologies Technologies that can store electricity to be used at a later time. These devices require a mechanism to convert alternating current (AC) electricity into another form for storage, and then back to AC electricity. Common forms of electricity storage include batteries, flywheels, and pumped hydro. Electricity storage can provide backup power, peaking power, and ancillary services, and can store excess electricity produced by renewable energy resources when available.[1] Related Terms electricity generation References ↑ https://www.smartgrid.gov/category/technology/electricity_storage_technologies [[C LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ategory: Smart Grid Definitionssmart grid,smart grid,

355

Energy Storage Technologies: State of Development for Stationary and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Technologies: State of Development for Stationary Energy Storage Technologies: State of Development for Stationary and Vehicular Applications Energy Storage Technologies: State of Development for Stationary and Vehicular Applications Testimony of Thomas S. Key, Technical Leader, Renewables and Distributed Generation, Electric Power Research Institute (EPRI) on Energy Storage Technologies: State of Development for Stationary and Vehicular Applications before the House Science and Technology Committee Energy and Environment Subcommittee October 3, 2007 Energy Storage Technologies: State of Development for Stationary and Vehicular Applications More Documents & Publications DOE/EPRI 2013 Electricity Storage Handbook in Collaboration with NRECA (July 2013) Grid Energy Storage December 2013 Enhancing the Smart Grid: Integrating Clean Distributed and Renewable

356

Electronic, Magnetic & Photonic Materials Division  

Science Conference Proceedings (OSTI)

... Committee · Energy Conversion and Storage Committee · Magnetic Materials Committee · Nanomaterials Committee · Thin Films and Interfaces Committee.

357

Accuracy of magnetic energy computations  

E-Print Network (OSTI)

For magnetically driven events, the magnetic energy of the system is the prime energy reservoir that fuels the dynamical evolution. In the solar context, the free energy is one of the main indicators used in space weather forecasts to predict the eruptivity of active regions. A trustworthy estimation of the magnetic energy is therefore needed in three-dimensional models of the solar atmosphere, eg in coronal fields reconstructions or numerical simulations. The expression of the energy of a system as the sum of its potential energy and its free energy (Thomson's theorem) is strictly valid when the magnetic field is exactly solenoidal. For numerical realizations on a discrete grid, this property may be only approximately fulfilled. We show that the imperfect solenoidality induces terms in the energy that can lead to misinterpreting the amount of free energy present in a magnetic configuration. We consider a decomposition of the energy in solenoidal and nonsolenoidal parts which allows the unambiguous estimation...

Valori, G; Pariat, E; Masson, S

2013-01-01T23:59:59.000Z

358

Aquifer thermal energy storage. International symposium: Proceedings  

DOE Green Energy (OSTI)

Aquifers have been used to store large quantities of thermal energy to supply process cooling, space cooling, space heating, and ventilation air preheating, and can be used with or without heat pumps. Aquifers are used as energy sinks and sources when supply and demand for energy do not coincide. Aquifer thermal energy storage may be used on a short-term or long-term basis; as the sole source of energy or as a partial storage; at a temperature useful for direct application or needing upgrade. The sources of energy used for aquifer storage are ambient air, usually cold winter air; waste or by-product energy; and renewable energy such as solar. The present technical, financial and environmental status of ATES is promising. Numerous projects are operating and under development in several countries. These projects are listed and results from Canada and elsewhere are used to illustrate the present status of ATES. Technical obstacles have been addressed and have largely been overcome. Cold storage in aquifers can be seen as a standard design option in the near future as it presently is in some countries. The cost-effectiveness of aquifer thermal energy storage is based on the capital cost avoidance of conventional chilling equipment and energy savings. ATES is one of many developments in energy efficient building technology and its success depends on relating it to important building market and environmental trends. This paper attempts to provide guidance for the future implementation of ATES. Individual projects have been processed separately for entry onto the Department of Energy databases.

NONE

1995-05-01T23:59:59.000Z

359

Underground-Energy-Storage Program, 1982 annual report  

DOE Green Energy (OSTI)

Two principal underground energy storage technologies are discussed--Seasonal Thermal Energy Storage (STES) and Compressed Air Energy Storage (CAES). The Underground Energy Storage Program objectives, approach, structure, and milestones are described, and technical activities and progress in the STES and CAES areas are summarized. STES activities include aquifer thermal energy storage technology studies and STES technology assessment and development. CAES activities include reservoir stability studies and second-generation concepts studies. (LEW)

Kannberg, L.D.

1983-06-01T23:59:59.000Z

360

Energy Storage | Global and Regional Solutions  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainable Energy Technologies Department Sustainable Energy Technologies Department Energy Storage Group A change toward alternative transportation - hydrogen fuel-cell vehicles, hybrid electric vehicles, plug-in hybrid-electric vehicles and electric vehicles - is essential for reducing oil dependency. Brookhaven National Laboratory conducts leading-edge research into two of the most promising technologies to move us closer to making such vehicles feasible, affordable and safe: solid-state hydrogen storage and lithium batteries. Brookhaven scientists are conducting basic electrochemical research to significantly improve the efficiency and reliability of fuel cells and batteries. They have launched a concerted effort of basic and applied research for the development of improved energy-storage materials and

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Energy Storage Fuel Cell Vehicle Analysis: Preprint  

DOE Green Energy (OSTI)

In recent years, hydrogen fuel cell (FC) vehicle technology has received considerable attention as a strategy to decrease oil consumption and reduce harmful emissions. However, the cost, transient response, and cold performance of FC systems may present significant challenges to widespread adoption of the technology for transportation in the next 15 years. The objectives of this effort were to perform energy storage modeling with fuel cell vehicle simulations to quantify the benefits of hybridization and to identify a process for setting the requirements of ES for hydrogen-powered FC vehicles for U.S. Department of Energy's Energy Storage Program.

Markel, T.; Pesaran, A.; Zolot, M.; Sprik, S.; Tataria, H.; Duong, T.

2005-04-01T23:59:59.000Z

362

Flywheel energy storage advances using HTS bearings.  

DOE Green Energy (OSTI)

High-Temperature-Superconducting (HT) bearings have the potential to reduce idling losses and make flywheel energy storage economical. Demonstration of large, high-speed flywheels is key to market penetration. Toward this goal, a flywheel system has been developed and tested with 5-kg to 15-kg disk-shaped rotors. Rlm speeds exceeded 400 mls and stored energies were >80 W-hr. Test implementation required technological advances in nearly all aspects of the flywheel system. Features and limitations of the design and tests are discussed, especially those related to achieving additional energy storage.

Mulcahy, T. M.

1998-09-11T23:59:59.000Z

363

Case Study on Thermal Energy Storage: Gemasolar  

Science Conference Proceedings (OSTI)

The 19.9-MW Gemasolar plant is the first commercial concentrating-solar thermal power plant to use a central receiver tower and a two-tank molten-salt thermal energy storage system. The initial plant operation has demonstrated the feasibility of the technology to operate under commercial conditions at utility scale and verified continuous 24-hour operation. The storage capacity makes the plant output dispatchable and improves the plant’s capacity factor and profitability. This white paper ...

2012-10-23T23:59:59.000Z

364

Hybrid energy storage system integration for vehicles  

Science Conference Proceedings (OSTI)

Energy consumption and the associated environmental impact are a pressing challenge faced by the transportation sector. Emerging electric-drive vehicles have shown promises for substantial reductions in petroleum use and vehicle emissions. Their success, ... Keywords: analysis, electric-drive vehicles, energy storage systems

Jia Wang; Kun Li; Qin Lv; Hai Zhou; Li Shang

2010-08-01T23:59:59.000Z

365

Solving Energy Storage Economics with the Energy Operating System  

NLE Websites -- All DOE Office Websites (Extended Search)

Solving Energy Storage Economics with the Energy Operating System Speaker(s): Ryan Wartena Date: September 12, 2012 - 12:00pm Location: 90-3122 Dr. Ryan Wartena, CEO and founder of...

366

FY06 DOE Energy Storage Program PEER Review  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 DOE Energy Storage PEER Review John D. Boyes Sandia National Laboratories Mission Develop advanced electricity storage and PE technologies, in partnership with industry, for...

367

Macroencapsulation of Phase Change Materials for Thermal Energy Storage.  

E-Print Network (OSTI)

??The use of a latent heat storage system using phase change materials (PCMs) is an effective way of storing thermal energy. Latent heat storage enables… (more)

Pendyala, Swetha

2012-01-01T23:59:59.000Z

368

Energy Storage Systems 2006 Peer Review | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 Peer Review 6 Peer Review Energy Storage Systems 2006 Peer Review The 2006 Peer Review Meeting for the DOE Energy Storage Systems (ESS) Program was held in Washington DC on November 2-3, 2006. Current and completed program projects were presented and reviewed by a group of industry professionals. The agenda and ESS program overview are available below. Day 1 morning session presentations Day 1 afternoon session presentations Day 2 morning session presentations Day 2 afternoon session presentations ESS 2006 Peer Review - Agenda.pdf ESS 2006 Peer Review - ESS Program Overview - John Boyes, SNL.pdf More Documents & Publications Energy Storage Systems 2007 Peer Review Energy Storage Systems 2007 Peer Review - Innovations in ESS Presentations Energy Storage Systems 2007 Peer Review - Utility & Commercial Applications

369

Balanced reconfiguration of storage banks in a hybrid electrical energy storage system  

Science Conference Proceedings (OSTI)

Compared with the conventional homogeneous electrical energy storage (EES) systems, hybrid electrical energy storage (HEES) systems provide high output power and energy density as well as high power conversion efficiency and low self-discharge at a low ... Keywords: bank reconfiguration, hybrid electrical energy storage system

Younghyun Kim; Sangyoung Park; Yanzhi Wang; Qing Xie; Naehyuck Chang; Massimo Poncino; Massoud Pedram

2011-11-01T23:59:59.000Z

370

Fields and forces in flywheel energy storage with high-temperature superconducting bearings  

DOE Green Energy (OSTI)

The development of low-loss bearings employing high-temperature superconductors has brought closer the advent of practical flywheel energy storage systems. These systems require magnetic fields and forces for levitation, stabilization, and energy transfer. This paper describes the status of experiments on flywheel energy storage at Argonne National Laboratory and computations in support of that project, in particular computations for the permanent-magnet rotor of the motor-generator that transfers energy to and from the flywheel, for other energy-transfer systems under consideration, and for the levitation and stabilization subsystem.

Turner, L.R. [Argonne National Lab., IL (United States). Energy Technology Div.

1996-05-01T23:59:59.000Z

371

Large electrical-energy storage facilities  

SciTech Connect

Problems associated with the utilization of various types of energy-storage facilities are considered, three areas being singled out: operation during the variable portion of the load curve with double regulation effect, handling of peaks and the filling in of off-peak dips in the load curve; the generation of power impulses through the use of stored energy for short-term supply of load; and the conversion of one form of energy to another. The present-day state of development and introduction of storage facilities of various kinds is described. The conditions for utilization of large-scale storage on the power systems of the USSR are evaluated, and the principles for determining the economic efficiency are formulated.

Ershevich, V.V.

1985-01-01T23:59:59.000Z

372

NREL: Energy Storage - Awards and Successes  

NLE Websites -- All DOE Office Websites (Extended Search)

Awards and Successes Awards and Successes Photo of Research and Development 100 Award In collaboration with DOE and industry, NREL's energy storage team has received numerous awards for innovative technologies that now benefit industry and consumers around the world. R&D 100 Awards Two prestigious R&D 100 awards were won by the energy storage team. These awards, which have been called "the Nobel Prizes of applied research," are presented annually by R&D Magazine and recognize the world's top 100 technologically significant products. Current-Interrupt Charging Algorithm Developed In 2001, NREL's energy storage team, Recombination Technologies, Optima Batteries, and the Advanced Lead Acid Battery Consortium were recognized with an R&D 100 Award for developing a current-interrupt charging algorithm

373

ENERGY STAR ® Enterprise Storage Draft Specification Framework  

E-Print Network (OSTI)

This document describes the key building blocks that form the basis for every ENERGY STAR specification; these items are intended to provide the framework around which the EPA can develop an effective energy efficiency program for Enterprise Storage. The principal objectives for this ENERGY STAR specification are threefold: (1) to encourage widespread adoption of appropriate hardware and software strategies to improve energy efficiency in enterprise storage systems, (2) to provide purchasers with the means to identify the most energy efficient enterprise storage solutions for their specific end-use application, and (3) to provide tools and information to designers and mangers looking to improve the efficiency of data center operations. The purpose of each building block is provided under the subheadings below, along with EPA’s preliminary thoughts on how each may ultimately be incorporated into the Version 1.0 Enterprise Storage specification. At the end of each section are a series of questions aimed at generating discussion about the proposed approach. Please note that this document is not intended to be a comprehensive review of the ENERGY STAR perspective on enterprise storage, rather it serves as a starting point for EPA’s specification development efforts. Stakeholders are encouraged to provide feedback on the specific concepts and definitions presented in this document, and are also welcome to submit comments of a more general nature. Communication between EPA and industry stakeholders is critical to the success of the ENERGY STAR program, especially in this early stage of the specification development process. Any and all creative suggestions for improvements to the basic ENERGY STAR approach outlined in this document will be considered for inclusion in subsequent draft and final specifications. ENERGY STAR representatives are available for additional technical discussions with interested parties at any time during the specification development process. Please contact Steve Pantano, ICF International, at

unknown authors

2009-01-01T23:59:59.000Z

374

Carbon Capture and Storage (CCS) Studies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Carbon Capture and Storage (CCS) Studies Carbon Capture and Storage (CCS) Studies Fossil Energy Studies for the next 6 months,December 2008-June 2009, Carbon Capture and Storage...

375

The Role of Energy Storage for Mini-Grid Stabilization  

E-Print Network (OSTI)

storage technologies. . . . . . . . . . . . 42 List of Figures 1 Measured and modelled PV system output.4 Lifetime discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 4.5 Reliability Summary of energy storage technologies for small PV systems . . . . . . . 36 4 Storage technologies

Paris-Sud XI, Université de

376

Optimal Demand Response with Energy Storage Management  

E-Print Network (OSTI)

In this paper, we consider the problem of optimal demand response and energy storage management for a power consuming entity. The entity's objective is to find an optimal control policy for deciding how much load to consume, how much power to purchase from/sell to the power grid, and how to use the finite capacity energy storage device and renewable energy, to minimize his average cost, being the disutility due to load- shedding and cost for purchasing power. Due to the coupling effect of the finite size energy storage, such problems are challenging and are typically tackled using dynamic programming, which is often complex in computation and requires substantial statistical information of the system dynamics. We instead develop a low-complexity algorithm called Demand Response with Energy Storage Management (DR-ESM). DR-ESM does not require any statistical knowledge of the system dynamics, including the renewable energy and the power prices. It only requires the entity to solve a small convex optimization pr...

Huang, Longbo; Ramchandran, Kannan

2012-01-01T23:59:59.000Z

377

Fuel Cell Technologies Office: Flow Cells for Energy Storage...  

NLE Websites -- All DOE Office Websites (Extended Search)

Flow Cells for Energy Storage Workshop The U.S. Department of Energy's (DOE) Lawrence Berkeley National Laboratory (LBNL) held a Flow Cells for Energy Storage Workshop on March...

378

ENERGY STORAGE IN AQUIFERS - - A SURVEY OF RECENT THEORETICAL STUDIES  

E-Print Network (OSTI)

temperature underground thermal energy storage. In Proc. Th~1980), Aquifer Thermal Energy Sto:t'age--·a survey, Invit.edal modeling of thermal energy storage in aquifers. In ~~-

Tsang, Chin Fu

2013-01-01T23:59:59.000Z

379

Compressed Air Energy Storage Demonstration Newsletter  

Science Conference Proceedings (OSTI)

The Compressed Air Energy Storage (CAES) Demonstration Project includes the phased planning, engineering design, construction, demonstration, and performance monitoring of two CAES plants. One plant will be a system rated at 300 MWs for up to 10 hours with a below-ground reservoir for bulk energy air storage, and the other will be a system rated at 15 MWs for 2 hours with above-ground air vessel/piping. This is a critical technology demonstration project that is necessary to enable higher penetration of ...

2011-04-21T23:59:59.000Z

380

Aquifer thermal energy (heat and chill) storage  

DOE Green Energy (OSTI)

As part of the 1992 Intersociety Conversion Engineering Conference, held in San Diego, California, August 3--7, 1992, the Seasonal Thermal Energy Storage Program coordinated five sessions dealing specifically with aquifer thermal energy storage technologies (ATES). Researchers from Sweden, The Netherlands, Germany, Switzerland, Denmark, Canada, and the United States presented papers on a variety of ATES related topics. With special permission from the Society of Automotive Engineers, host society for the 1992 IECEC, these papers are being republished here as a standalone summary of ATES technology status. Individual papers are indexed separately.

Jenne, E.A. (ed.)

1992-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Energy storage for tokamak reactor cycles  

DOE Green Energy (OSTI)

The inherent characteristic of a tokamak reactor requiring periodic plasma quench and reignition introduces the problem of energy storage to permit continuous electrical output to the power grid. The cycle under consideration in this paper is a 1000 second burn followed by a 100 second reignition phase. The physical size of a typical toroidal plasma reaction chamber for a tokamak reactor has been described earlier. The thermal energy storage requirements described in this reference will serve as a basis for much of the ensuing discussion.

Buchanan, C.H.

1979-01-01T23:59:59.000Z

382

LiH thermal energy storage device  

DOE Patents (OSTI)

A thermal energy storage device for use in a pulsed power supply to store waste heat produced in a high-power burst operation utilizes lithium hydride as the phase change thermal energy storage material. The device includes an outer container encapsulating the lithium hydride and an inner container supporting a hydrogen sorbing sponge material such as activated carbon. The inner container is in communication with the interior of the outer container to receive hydrogen dissociated from the lithium hydride at elevated temperatures. 5 figures.

Olszewski, M.; Morris, D.G.

1994-06-28T23:59:59.000Z

383

Grid Energy Storage December 2013 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grid Energy Storage December 2013 Grid Energy Storage December 2013 Grid Energy Storage December 2013 Modernizing the electric grid will help the nation meet the challenge of handling projected energy needs-including addressing climate change by relying on more energy from renewable sources-in the coming decades, while maintaining a robust and resilient electricity delivery system. By some estimates, the United States will need somewhere between 4 and 5 tera kilowatt-hours of electricity annually by 2050. Those planning and implementing grid expansion to meet this increased electric load face growing challenges in balancing economic and commercial viability, resiliency, cyber-security, and impacts to carbon emissions and environmental sustainability. Energy storage systems (ESS) will play a

384

Compressed Air Energy Storage (CAES) | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Compressed Air Energy Storage (CAES) Jump to: navigation, search Contents 1 Introduction 2 Technology Description 3 Plants 4 References Introduction Compressed air energy storage (CAES) is a way to store energy that is generated at night and deliver the energy during the day to meet peak demand. This is performed by compressing air and storing it during periods of excess electricity and expanding the air through a turbine when electricity is needed. Technology Description Diabatic Diabatic compressed air energy storage is what the two existing compressed air energy storage facilities currently employ. This method is

385

Electrochemical Energy Storage and Conversion  

Science Conference Proceedings (OSTI)

Mar 4, 2013 ... Design and Discovery of Novel Energy Materials: Stephan Lany1; 1NREL ... determine and characterise the state of an electrochemical system, ...

386

Applied research on energy storage and conversion for photovoltaic and wind energy systems. Volume I. Study summary and concept screening. Final report  

DOE Green Energy (OSTI)

This study was directed at a review of storage technologies, and particularly those which might be best suited for use in conjunction with wind and photovoltaics. The potential ''worth'' added by incorporating storage was extensively analyzed for both wind and photovoltaics. Energy storage concepts studied include (1) above ground pumped hydro storage, (2) underground pumped hydro storage, (3) thermal storage-oil, (4) thermal storage-steam, (5) underground compressed air storage, (6) pneumatic storage, (7) lead-acid batteries, (8) advanced batteries, (9) inertial storage (flywheel), (10) hydrogen generation and storage, and (11) superconducting magnetic energy storage. The investigations performed and the major results, conclusions, and recommendations are presented in this volume. (WHK)

Not Available

1978-01-01T23:59:59.000Z

387

Hydrogen Electrochemical Energy Storage Device  

very high energy density of approximately 30,000 Watt-hour per kilogram (Wh/kg). Comparatively, state of the art Li-Ion batteries have energy densities of about 400 Wh/kg. While hydrogen fuel cells have been heavily investigated as an alternative ...

388

Development of 5kWh Flywheel Energy Storage System Using MATLAB/xPC Target  

Science Conference Proceedings (OSTI)

A 5kWh class FESS(Flywheel Energy Storage System) with the operating speed range of 9,000~15,000rpm has been developed. The system consists of a composite flywheel rotor, active magnetic bearings, a motor/generator and its controller. Because Active ... Keywords: FESS, Magnetic bearing, rotor dynamics, Imbalace Response, xPC Target

Cheol Hoon Park; Sang-Kyu Choi; Young Su Son; Young Hee Han

2009-03-01T23:59:59.000Z

389

Energy Storage Systems 2007 Peer Review - Power Electronics Presentations |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Power Electronics Power Electronics Presentations Energy Storage Systems 2007 Peer Review - Power Electronics Presentations The U.S. DOE Energy Storage Systems Program (ESS) held an annual peer review on September 27, 2007 in San Francisco, CA. Eighteen presentations were divided into categories; those related to power electronics are below. Other presentation categories were: Economics - Benefit Studies and Environment Benefit Studies Utility & Commercial Applications of Advanced Energy Storage Systems International Energy Storage Programs Innovations in Energy Storage Systems ESS 2007 Peer Review - StatCom with Energy Storage to Smooth Intermittent Power Output of Wind Farms - Mesut Baran, NC State.pdf ESS 2007 Peer Review - Cyber-Physical Systems Distributed Control - Mariesa

390

Cost-Effective Solar Thermal Energy Storage: Thermal Energy Storage With Supercritical Fluids  

Science Conference Proceedings (OSTI)

Broad Funding Opportunity Announcement Project: UCLA and JPL are creating cost-effective storage systems for solar thermal energy using new materials and designs. A major drawback to the widespread use of solar thermal energy is its inability to cost-effectively supply electric power at night. State-of-the-art energy storage for solar thermal power plants uses molten salt to help store thermal energy. Molten salt systems can be expensive and complex, which is not attractive from a long-term investment standpoint. UCLA and JPL are developing a supercritical fluid-based thermal energy storage system, which would be much less expensive than molten-salt-based systems. The team’s design also uses a smaller, modular, single-tank design that is more reliable and scalable for large-scale storage applications.

None

2011-02-01T23:59:59.000Z

391

Category:Smart Grid Projects - Energy Storage Demonstrations | Open Energy  

Open Energy Info (EERE)

Energy Storage Demonstrations Energy Storage Demonstrations Jump to: navigation, search Smart Grid Energy Storage Demonstration Projects category. Pages in category "Smart Grid Projects - Energy Storage Demonstrations" The following 16 pages are in this category, out of 16 total. 4 44 Tech Inc. Smart Grid Demonstration Project A Amber Kinetics, Inc. Smart Grid Demonstration Project B Beacon Power Corporation Smart Grid Demonstration Project C City of Painesville Smart Grid Demonstration Project D Duke Energy Business Services, LLC Smart Grid Demonstration Project E East Penn Manufacturing Co. Smart Grid Demonstration Project K Ktech Corporation Smart Grid Demonstration Project N New York State Electric & Gas Corporation Smart Grid Demonstration Project P Pacific Gas & Electric Company Smart Grid Demonstration Project

392

The Role of Thermal Energy Storage in Industrial Energy Conservation  

E-Print Network (OSTI)

Thermal Energy Storage for Industrial Applications is a major thrust of the Department of Energy's Thermal Energy Storage Program. Utilizing Thermal Energy Storage (TES) with process or reject heat recovery systems has been shown to be extremely beneficial for several applications. Recent system studies resulting from contracts awarded by the Department of Energy (DOE) have identified four especially; significant industries where TES appears attractive - food processing, paper and pulp, iron and steel, and cement. Potential annual fuel savings with large scale implementation of near term TES systems for these industries is over 9 x 106 bbl of oil. This savings is due to recuperation and storage in the food processing industry, direct fuel substitution in the paper and pulp industry and reduction in electric utility peak fuel use through in-plant production of electricity from utilization of reject heat in the steel and cement industries.

Duscha, R. A.; Masica, W. J.

1979-01-01T23:59:59.000Z

393

Webinar Presentation - Energy Storage in State RPS - Dec. 19, 2011 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Presentation - Energy Storage in State RPS - Dec. 19, 2011 Presentation - Energy Storage in State RPS - Dec. 19, 2011 Webinar Presentation - Energy Storage in State RPS - Dec. 19, 2011 Dr. Imre Gyuk of the Office of Electricity Delivery and Energy Reliability presented "Grid Energy Storage: The Big Picture" as one of four guest speakers for a webinar on energy storage and renewable portfolio standards (RPS). The webinar was hosted by the State-Federal RPS Collaborative and the Clean Energy States Alliance (CESA) to explore the role of energy storage in state RPS, including the integration of an increasingly higher penetration of renewables and energy storage as a generation resource. The webinar presentation slides are available below; the recorded webinar may be downloaded from CESA's website. Webinar Presentation - December 19 RPS and Energy Storage.pdf

394

January 2013 Most Viewed Documents for Energy Storage, Conversion...  

Office of Scientific and Technical Information (OSTI)

January 2013 Most Viewed Documents for Energy Storage, Conversion, And Utilization Energy Technology Perspectives 2012: Executive Summary Portuguese version NONE Energy...

395

Aquifer thermal energy storage: a survey  

DOE Green Energy (OSTI)

The disparity between energy production and demand in many power plants has led to increased research on the long-term, large-scale storage of thermal energy in aquifers. Field experiments have been conducted in Switzerland, France, the United States, Japan, and the People's Republic of China to study various technical aspects of aquifer storage of both hot and cold water. Furthermore, feasibility studies now in progress include technical, economic, and environmental analyses, regional exploration to locate favorable storage sites, and evaluation and design of pilot plants. Several theoretical and modeling studies are also under way. Among the topics being studied using numerical models are fluid and heat flow, dispersion, land subsidence or uplift, the efficiency of different injection/withdrawal schemes, buoyancy tilting, numerical dispersion, the use of compensation wells to counter regional flow, steam injection, and storage in narrow glacial deposits of high permeability. Experiments to date illustrate the need for further research and development to ensure successful implementation of an aquifer storage system. Some of the areas identified for further research include shape and location of the hydrodynamic and thermal fronts, choice of appropriate aquifers, thermal dispersion, possibility of land subsidence or uplift, thermal pollution, water chemistry, wellbore plugging and heat exchange efficiency, and control of corrosion.

Tsang, C.F.; Hopkins, D.; Hellstroem, G.

1980-01-01T23:59:59.000Z

396

Flow Cells for Energy Storage Workshop Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Electricity Delivery Electricity Delivery & Energy Reliability Organized by: Energy Efficiency & Renewable Energy W i t h h e l p b y : Agenda Day/Time Speaker Subject Wednesday, March 07, 2012 8:45-9:00 Adam Weber, LBNL Welcome and workshop overview 9:00-9:30 Various, EERE, OFCT Background, approach, and reversible fuel cells 9:30-9:55 Michael Perry, UTRC Renaissance in flow cells: opportunities 9:55-10:20 Joe Eto, LBNL Energy storage requirements for the smart grid 10:20-10:35 AM Break 10:35-11:00 Robert Savinell, CWRU Revisiting flow-battery R&D 11:00-11:25 Stephen Clarke, Applied Intellectual Capital Lessons learned and yet to be learned from 20 years in RFB R&D 11:25-11:45 Imre Gyuk, DOE OE Research and deployment of stationary storage at DOE

397

advanced energy storage | OpenEI  

Open Energy Info (EERE)

35 35 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142280435 Varnish cache server advanced energy storage Dataset Summary Description The National Renewable Energy Laboratory (NREL) publishes a wide selection of data and statistics on renewable energy power technologies from a variety of sources (e.g. EIA, Oak Ridge National Laboratory, Sandia National Laboratory, EPRI and AWEA). In 2006, NREL published the 4th edition, presenting market and performance data for over a dozen technologies from publications from 1997 - 2004. Source NREL Date Released March 01st, 2006 (8 years ago) Date Updated Unknown Keywords advanced energy storage batteries biomass csp fuel cells geothermal

398

Energy Proportionality for Disk Storage Using Replication  

Science Conference Proceedings (OSTI)

Energy saving has become a crucial concern in datacenters as several reports predict that the anticipated energy costs over a three year period will exceed hardware acquisition. In particular, saving energy for storage is of major importance as storage devices (and cooling them off) may contribute over 25 percent of the total energy consumed in a datacenter. Recent work introduced the concept of energy proportionality and argued that it is a more relevant metric than just energy saving as it takes into account the tradeoff between energy consumption and performance. In this paper, we present a novel approach, called FREP (Fractional Replication for Energy Proportionality), for energy management in large datacenters. FREP includes areplication strategy and basic functions to enable flexible energy management. Specifically, our method provides performance guarantees by adaptively controlling the power states of a group of disks based on observed and predicted workloads. Our experiments, using a set of real and synthetic traces, show that FREP dramatically reduces energy requirements with a minimal response time penalty.

Kim, Jinoh; Rotem, Doron

2010-09-09T23:59:59.000Z

399

Charge allocation for hybrid electrical energy storage systems  

Science Conference Proceedings (OSTI)

Hybrid electrical energy storage (HEES) systems, composed of multiple banks of heterogeneous electrical energy storage (EES) elements with their unique strengths and weaknesses, have been introduced to efficiently store and retrieve electrical energy ... Keywords: charge allocation, charge management, hybrid electrical energy storage system

Qing Xie; Yanzhi Wang; Younghyun Kim; Naehyuck Chang; Massoud Pedram

2011-10-01T23:59:59.000Z

400

Sustainable Energy Science and Engineering Center Hydrogen Storage  

E-Print Network (OSTI)

Sustainable Energy Science and Engineering Center Hydrogen Storage #12;Sustainable Energy Science 1990 2000 2010 2020 Hydrogen pellets Mg(NH3)6Cl2 Hydrogen Storage Source: Ian Edwards, ITI Energy, May. Portable applications including: computing, cell-phones and cameras (the 3 `C's'). Main Energy Storage

Krothapalli, Anjaneyulu

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

DOE Hydrogen Analysis Repository: Hydrogen for Energy Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen for Energy Storage Hydrogen for Energy Storage Project Summary Full Title: Cost and GHG Implications of Hydrogen for Energy Storage Project ID: 260 Principal Investigator: Darlene Steward Brief Description: The levelized cost of energy (LCOE) of the most promising and/or mature energy storage technologies was compared with the LCOE of several hydrogen energy storage configurations. In addition, the cost of using the hydrogen energy storage system to produce excess hydrogen was evaluated. The use of hydrogen energy storage in conjunction with an isolated wind power plant-and its effect on electricity curtailment, credit for avoided GHG emissions, and LCOE-was explored. Keywords: Energy storage; Hydrogen; Electricity Performer Principal Investigator: Darlene Steward

402

Energy Storage Research and Development 2006 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

EnErgy StoragE rESEarch EnErgy StoragE rESEarch and dEvElopmEnt U.S. Department of Energy Office of FreedomCAR and Vehicle Technologies 1000 Independence Avenue S.W. Washington, D.C. 20585-0121 FY 2006 Progress Report for Energy Storage Research and Development Energy Efficiency and Renewable Energy FreedomCAR and Vehicle Technologies Approved by: David Howell Manager, Energy Storage R&D January 2007 Energy Storage Research and Development FY 2006 Annual Progress Report TABLE OF CONTENTS I. INTRODUCTION ............................................................................................................... 1 I.A FreedomCAR and Vehicle Technologies Program Overview .................................. 1 I.B Energy Storage Research & Development Overview ............................................... 1

403

Southern company energy storage study : a study for the DOE energy storage systems program.  

Science Conference Proceedings (OSTI)

This study evaluates the business case for additional bulk electric energy storage in the Southern Company service territory for the year 2020. The model was used to examine how system operations are likely to change as additional storage is added. The storage resources were allowed to provide energy time shift, regulation reserve, and spinning reserve services. Several storage facilities, including pumped hydroelectric systems, flywheels, and bulk-scale batteries, were considered. These scenarios were tested against a range of sensitivities: three different natural gas price assumptions, a 15% decrease in coal-fired generation capacity, and a high renewable penetration (10% of total generation from wind energy). Only in the elevated natural gas price sensitivities did some of the additional bulk-scale storage projects appear justifiable on the basis of projected production cost savings. Enabling existing peak shaving hydroelectric plants to provide regulation and spinning reserve, however, is likely to provide savings that justify the project cost even at anticipated natural gas price levels. Transmission and distribution applications of storage were not examined in this study. Allowing new storage facilities to serve both bulk grid and transmission/distribution-level needs may provide for increased benefit streams, and thus make a stronger business case for additional storage.

Ellison, James; Bhatnagar, Dhruv; Black, Clifton [Southern Company Services, Inc., Birmingham, AL; Jenkins, Kip [Southern Company Services, Inc., Birmingham, AL

2013-03-01T23:59:59.000Z

404

Ocean Renewable Energy Storage (ORES) System: Analysis of an Undersea Energy Storage Concept  

E-Print Network (OSTI)

Due to its higher capacity factor and proximity to densely populated areas, offshore wind power with integrated energy storage could satisfy > 20% of U.S. electricity demand. Similar results could also be obtained in many ...

Slocum, Alexander H.

405

Energy Storage Systems 2007 Peer Review - Innovations in ESS Presentations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Innovations in ESS Innovations in ESS Presentations Energy Storage Systems 2007 Peer Review - Innovations in ESS Presentations The U.S. DOE Energy Storage Systems Program (ESS) held an annual peer review on September 27, 2007 in San Francisco, CA. Eighteen presentations were divided into categories; those related to innovations in energy storage systems are below. Other presentation categories were: Economics - Benefit Studies and Environment Benefit Studies Utility & Commercial Applications of Advanced Energy Storage Systems International Energy Storage Programs Power Electronics ESS 2007 Peer Review - Evaluation of Lead-Carbon Storage Devices for Utility Applications - Enders Dickinson, MeadWestvaco.pdf ESS 2007 Peer Review - High Voltage Electrochemical Capacitor - David

406

A National Grid Energy Storage Strategy - Electricity Advisory Committee -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grid Energy Storage Strategy - Electricity Advisory Grid Energy Storage Strategy - Electricity Advisory Committee - December 2013 A National Grid Energy Storage Strategy - Electricity Advisory Committee - December 2013 The Electricity Advisory Committee (EAC) represents a wide cross section of electricity industry stakeholders. This document presents the EAC's vision for a national energy storage strategic plan. It provides an outline for guidance, alignment, coordination, and inspiration for governments, businesses, advocacy groups, academics, and others who share a similar vision for energy storage. The strategy addresses applications of electric storage technologies that optimize the performance of the power grid once electric power has been generated and delivered to the network. It aims to provide a framework of

407

Ridge Energy Storage and Grid Services LP | Open Energy Information  

Open Energy Info (EERE)

Energy Storage and Grid Services LP Energy Storage and Grid Services LP Jump to: navigation, search Name Ridge Energy Storage and Grid Services LP Place Houston, Texas Zip 77027 Product Developer of compressed air energy storage projects in the US and England. Coordinates 29.76045°, -95.369784° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":29.76045,"lon":-95.369784,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

408

Test profiles for stationary energy storage applications  

Science Conference Proceedings (OSTI)

Evaluation of battery and other energy storage technologies for stationary uses is progressing rapidly toward application-specific testing that uses computer-based data acquisition and control equipment, active electronic loads and power supplies, and customized software, to enable sophisticated test regimes that simulate actual use conditions. These simulated-use tests provide more accurate performance and life evaluations than simple constant resistance or current testing regimes. Some of the tests use stepped constant-power charge and discharge regimes to simulate conditions created by electric utility applications such as frequency regulation and spinning reserve. Other test profiles under development simulate conditions for the energy storage component of Remote Area Power Supplies (RAPS) that include renewable and/or fossil-fueled generators. Various RAPS applications have unique sets of service conditions that require specialized test profiles. However, almost all RAPS tests and many tests that represent other stationary applications need to simulate significant time periods during which storage devices operate at low-to-medium states-of-charge without full recharge. Consideration of these and similar issues in simulated-use test regimes is necessary to effectively predict the responses of the various types of batteries in specific stationary applications. This paper describes existing and evolving stationary applications for energy storage technologies and test regimes that are designed to simulate them. The paper also discusses efforts to develop international testing standards.

Butler, P.C. [Sandia National Labs., Albuquerque, NM (United States); Cole, J.F. [International Lead Zinc Research Organization, Research Triangle Park, NC (United States); Taylor, P.A. [Energetics, Inc., Columbia, MD (United States)

1998-09-01T23:59:59.000Z

409

Underground Energy Storage Program. 1985 annual summary  

DOE Green Energy (OSTI)

Primary activities in seasonal thermal energy storage (STES) involved field testing of high-temperature (> 100/sup 0/C (212/sup 0/F)) aquifer thermal energy storage (ATES) at St. Paul, monitoring of the University of Alabama Student Recreation Center in Tuscaloosa, Alabama, and limited numerical modeling efforts. The first long-cycle test at the University of Minnesota field test facility was completed. It consisted of approximately 59 days of heated water injection, 64 days of storage, and 58 days of heated water recovery. Chemistry of the recovered water was close to what was expected. Limited experimentation was done to characterize physical and chemical processes at the ATES test facility. A chill ATES monitoring project, initiated at the Student Recreation Center on the University of Alabama campus, continued during the reporting period. Numerical modeling efforts were continued at a minimum level to support field studies. The chill ATES facility at the University of Alabama Student Recreation Center was simulated with the Unconfined Aquifer Thermal Energy Storage (UCATES) model to examine the effect of different injection/recovery patterns on the system's thermal performance.

Raymond, J.R.; Kannberg, L.D.

1986-08-01T23:59:59.000Z

410

Energy storage criteria handbook. Final report mar 81-jun 82  

SciTech Connect

The purpose of this handbook is to provide information and criteria necessary for the selection and sizing of energy storage technologies for use at U.S. Naval facilities. The handbook gives Naval base personnel procedures and information to select the most viable energy storage options to provide the space conditioning (heating and cooling) and domestic hot water needs of their facility. The handbook may also be used by contractors, installers, designers, engineers, architects, and manufacturers who intend to enter the energy storage business. The handbook is organized into three major sections: a general section, a technical section, and an example section. While a technical background is assumed for the latter two sections, the general section is simply written and can serve as an introduction to the field of energy storage. The technical section examines the following energy storage technologies: sensible heat storage, latent heat storage, cold storage, thermochemical storage, mechanical storage, pumped hydro storage, and electrochemical storage. The example section is limited to thermal storage and includes examples for: water tank storage, rockbed storage, latent heat storage, and cold water storage.

Hull, J.R.; Cole, R.L.; Hull, A.B.

1982-10-01T23:59:59.000Z

411

Electrochemical Capacitors as Energy Storage in Hybrid-Electric Vehicles: Present Status and Future Prospects  

E-Print Network (OSTI)

Capacitors as Energy Storage in Hybrid- Electric Vehicles:uncertainty regarding the energy storage technologies.Whether a particular energy storage technology is suitable

Burke, Andy; Miller, Marshall

2009-01-01T23:59:59.000Z

412

Graphene-based Material Systems for Nanoelectronics and Energy Storage Devices  

E-Print Network (OSTI)

conductive paper for energy-storage devices" Proceedings ofChemical Capacitive Energy Storage" Advanced Materials 2011,conductive paper for energy-storage devices" Proceedings of

Guo, Shirui

2012-01-01T23:59:59.000Z

413

THEORETICAL STUDIES IN LONG-TERM THERMAL ENERGY STORAGE IN AQUIFERS  

E-Print Network (OSTI)

Mathematical Modeling of Thermal Energy Storage in Aquifers.of Aquifer Thermal Energy Storage Workshop, LawrenceF.P. "Thermal Energy Storage in a Confined Aquifer- Second

Tsang, C.F.

2013-01-01T23:59:59.000Z

414

Solar energy storage through the homogeneous electrocatalytic reduction of carbon dioxide : photoelectrochemical and photovoltaic approaches  

E-Print Network (OSTI)

Quantum Capture and Energy Storage. Photochem. Photobio.D ISSERTATION Solar Energy Storage through the Homogeneoussolar based fuels and energy storage. At present, it is not

Sathrum, Aaron John

2011-01-01T23:59:59.000Z

415

AQUIFER THERMAL ENERGY STORAGE. A NUMERICAL SIMULATION OF AUBURN UNIVERSITY FIELD EXPERIMENTS  

E-Print Network (OSTI)

University Thermal Energy Storage , LBL No. 10194. Edwards,modeling of thermal energy storage in aquifers, ProceedingsAquifer Thermal Energy Storage Programs (in preparation).

Tsang, Chin Fu

2013-01-01T23:59:59.000Z

416

SEASONAL THERMAL ENERGY STORAGE IN AQUIFERS-MATHEMATICAL MODELING STUDIES IN 1979  

E-Print Network (OSTI)

of Aquifer Thermal Energy Storage." Lawrence BerkeleyP, Andersen, "'rhermal Energy Storage in a Confined Aquifer~University Thermal Energy Storage Experiment." Lawrence

Tsang, Chin Fu

2013-01-01T23:59:59.000Z

417

Large Scale Computing and Storage Requirements for Basic Energy Sciences Research  

E-Print Network (OSTI)

COMPUTING AND STORAGE REQUIREMENTS Basic Energy SciencesEnergy  Sciences   8.2.1.4   Computational  and  Storage  Computing  and  Storage  Requirements  for  Basic  Energy  

Gerber, Richard

2012-01-01T23:59:59.000Z

418

Synthesis and characterization of nanostructured transition metal oxides for energy storage devices  

E-Print Network (OSTI)

Figure 1.1. Ragone plot of various energy storage systems [in technology and energy storage has become the limitingthe limit of commercial energy storage technology comprised

Kim, Jong Woung

2012-01-01T23:59:59.000Z

419

Flexographically Printed Rechargeable Zinc-based Battery for Grid Energy Storage  

E-Print Network (OSTI)

Electrochemical Capacitor Energy Storage Using Direct WriteTarascon, “Electrical Energy Storage for the Grid: A BatteryProgress in electrical energy storage system: A critical

Wang, Zuoqian

2013-01-01T23:59:59.000Z

420

SEASONAL THERMAL ENERGY STORAGE IN AQUIFERS-MATHEMATICAL MODELING STUDIES IN 1979  

E-Print Network (OSTI)

Aspects of Aquifer Thermal Energy Storage." Lawrencethe Auburn University Thermal Energy Storage Experiment."LBL~l0208 SEASONAL THERMAL ENERGY STORAGE IN AQUIFERS~

Tsang, Chin Fu

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

THEORETICAL STUDIES IN LONG-TERM THERMAL ENERGY STORAGE IN AQUIFERS  

E-Print Network (OSTI)

Mathematical Modeling of Thermal Energy Storage in Aquifers.Proceedings of Aquifer Thermal Energy Storage Workshop,within the Seasonal Thermal Energy Storage program managed

Tsang, C.F.

2013-01-01T23:59:59.000Z

422

Phase Change Materials for Thermal Energy Storage in Concentrated Solar Thermal Power Plants  

E-Print Network (OSTI)

PHASE CHANGE THERMAL ENERGY STORAGE FOR CONCENTRATING SOLARChange Materials for Thermal Energy Storage in ConcentratedChange Materials for Thermal Energy Storage in Concentrated

Hardin, Corey Lee

2011-01-01T23:59:59.000Z

423

Phase Change Materials for Thermal Energy Storage in Concentrated Solar Thermal Power Plants  

E-Print Network (OSTI)

PHASE CHANGE THERMAL ENERGY STORAGE FOR CONCENTRATING SOLARMaterials for Thermal Energy Storage in Concentrated SolarMaterials for Thermal Energy Storage in Concentrated Solar

Hardin, Corey Lee

2011-01-01T23:59:59.000Z

424

Fact Sheet: Tehachapi Wind Energy Storage Project (October 2012) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tehachapi Wind Energy Storage Project (October 2012) Tehachapi Wind Energy Storage Project (October 2012) Fact Sheet: Tehachapi Wind Energy Storage Project (October 2012) The Tehachapi Wind Energy Storage Project (TSP) Battery Energy Storage System (BESS) consists of an 8 MW-4 hour (32 MWh) lithium-ion battery and a smart inverter system that is cutting-edge in scale and application. Southern California Edison (SCE) will test the BESS for 24 months to determine its capability and effectiveness to support 13 operational users. Fact Sheet: Tehachapi Wind Energy Storage Project (October 2012) More Documents & Publications New Reports and Other Materials Energy Storage Systems 2012 Peer Review Presentations - Poster Session 2 (Day 2): ARRA Projects Energy Storage Systems 2010 Update Conference Presentations - Day 2,

425

Energy Storage Technologies: State of Development for Stationary and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Technologies: State of Development for Stationary Energy Storage Technologies: State of Development for Stationary and Vehicular Applications Energy Storage Technologies: State of Development for Stationary and Vehicular Applications Testimony of Thomas S. Key, Technical Leader, Renewables and Distributed Generation, Electric Power Research Institute (EPRI) on Energy Storage Technologies: State of Development for Stationary and Vehicular Applications before the House Science and Technology Committee Energy and Environment Subcommittee October 3, 2007 Energy Storage Technologies: State of Development for Stationary and Vehicular Applications More Documents & Publications DOE/EPRI 2013 Electricity Storage Handbook in Collaboration with NRECA (July 2013) Grid Energy Storage December 2013 Energy Storage Systems 2012 Peer Review Presentations - Day 3, Session 3

426

Joint Center for Energy Storage Research | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Joint Center for Energy Storage Research Share Description The Joint Center for Energy Storage Research (JCESR) is a major public-private research partnership that integrates U.S....

427

Energy Storage Systems 2012 Peer Review Presentations - Poster...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ARRA Projects Energy Storage Systems 2012 Peer Review Presentations - Poster Session 2 (Day 2): ARRA Projects The U.S. DOE Energy Storage Systems Program (ESS) conducted a peer...

428

SunShot Initiative: Thermochemical Energy Storage for Stirling...  

NLE Websites -- All DOE Office Websites (Extended Search)

Thermochemical Energy Storage for Stirling CSP Systems to someone by E-mail Share SunShot Initiative: Thermochemical Energy Storage for Stirling CSP Systems on Facebook Tweet about...

429

Energy Storage Systems 2012 Peer Review Presentations - Day 1...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Peer Review Presentations - Day 1, Session 1 Energy Storage Systems 2012 Peer Review Presentations - Day 1, Session 1 The U.S. DOE Energy Storage Systems Program (ESS) conducted...

430

Energy Storage Systems 2012 Peer Review Presentations - Poster...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Poster Session 2 (Day 2): SBIR Projects Energy Storage Systems 2012 Peer Review Presentations - Poster Session 2 (Day 2): SBIR Projects The U.S. DOE Energy Storage Systems Program...

431

ESS 2012 Peer Review - Nevada Energy Storage Study - Jim Ellison...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2011-XXXXP Objectives To answer the following questions: * Is there a business case for energy storage in Nevada? * What value can energy storage provide to Nevada in the face of...

432

Energy Storage Systems 2012 Peer Review Presentations - Poster...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Poster Session 1 (Day 1): ARPA-E Projects Energy Storage Systems 2012 Peer Review Presentations - Poster Session 1 (Day 1): ARPA-E Projects The U.S. DOE Energy Storage Systems...

433

Energy Storage Systems 2012 Peer Review Presentations - Day 1...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Day 1, Session 1 Energy Storage Systems 2012 Peer Review Presentations - Day 1, Session 1 The U.S. DOE Energy Storage Systems Program (ESS) conducted a peer review and update...

434

Reference Designs of 50 MW / 250 MWh Energy Storage Systems  

Science Conference Proceedings (OSTI)

Electric utilities are interested energy storage solutions for renewable integration and transmission and distribution (TD) grid support that require systems of 10's of MWs in scale and energy durations of longer than 4 hours. Compressed air energy storage and pumped hydro systems are currently the lowest capital cost (/ kW-h) bulk storage options for energy durations longer than 10 hour; however, these storage facilities have geological and siting restrictions and require long permitting and deployment ...

2010-12-16T23:59:59.000Z

435

Strategic Intelligence Update: Distributed Generation & Energy Storage, 1st Newsletter  

Science Conference Proceedings (OSTI)

Distributed generation and energy storage technologies add value to a wide range of applications within the electric utility enterprise. Energy storage at megawatt-hour scales can be used to enable generators to better follow load and stabilize transmission voltage and frequency. Both distributed generation and energy storage systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage e...

2008-06-11T23:59:59.000Z

436

Strategic Intelligence Update - Energy Storage & Distributed Generation: December 2010  

Science Conference Proceedings (OSTI)

Distributed generation and energy storage technologies add value to a wide range of applications within the electric utility enterprise. Both distributed generation and energy storage systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage especially has the ability to improve the value of intermittent renewable resources. Smaller-scale distributed energy storage, on the order of a ...

2010-12-14T23:59:59.000Z

437

Strategic Intelligence Update: Distributed Generation & Energy Storage, December 2008  

Science Conference Proceedings (OSTI)

Distributed generation and energy storage technologies add value to a wide range of applications within the electric utility enterprise. Energy storage at megawatt-hour scales can be used to enable generators to better follow load and stabilize transmission voltage and frequency. Both distributed generation and energy storage systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage e...

2008-12-12T23:59:59.000Z

438

Strategic Intelligence Update: Energy Storage and Distributed Generation  

Science Conference Proceedings (OSTI)

Distributed generation and energy storage technologies add value to a wide range of applications within the electric utility enterprise. Both distributed generation and energy storage systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage especially has the ability to improve the value of intermittent renewable resources. Smaller-scale distributed energy storage, on the order of a ...

2010-08-05T23:59:59.000Z

439

Strategic Intelligence Update: Energy Storage and Distributed Generation  

Science Conference Proceedings (OSTI)

Distributed generation and energy storage technologies add value to a wide range of applications within the electric utility enterprise. Both distributed generation and energy storage systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage especially has the ability to improve the value of intermittent renewable resources. Smaller-scale distributed energy storage, on the order of a ...

2010-10-15T23:59:59.000Z

440

Strategic Intelligence Update: Energy Storage and Distributed Generation  

Science Conference Proceedings (OSTI)

Distributed generation and energy storage technologies add value to a wide range of applications within the electric utility enterprise. Both distributed generation and energy storage systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage especially has the ability to improve the value of intermittent renewable resources. Smaller scale distributed energy storage, on the order of a ...

2010-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

PHEV Energy Storage and Drive Cycle Impacts (Presentation)  

DOE Green Energy (OSTI)

Plug-in Hybrid vehicles energy storage and drive cycle impacts, presented at the 7th Advanced Automotive Battery Conference.

Markel, T.; Pesaran, A.

2007-05-17T23:59:59.000Z

442

Grain Size Effects on the Energy Storage Properties of Barium ...  

Science Conference Proceedings (OSTI)

Symposium, Energy Storage III: Materials, Systems and Applications Symposium. Presentation Title ... Electrochemical Hydrogen Insertion in Titanium Carbide.

443

Energy Storage Activities in the United States Electricity Grid...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Activities in the United States Electricity Grid Electricity Advisory Committee Energy Storage Technologies Subcommittee Members Ralph Masiello, Subcommittee Chair Senior...

444

Boosting CSP Production with Thermal Energy Storage  

Science Conference Proceedings (OSTI)

Combining concentrating solar power (CSP) with thermal energy storage shows promise for increasing grid flexibility by providing firm system capacity with a high ramp rate and acceptable part-load operation. When backed by energy storage capability, CSP can supplement photovoltaics by adding generation from solar resources during periods of low solar insolation. The falling cost of solar photovoltaic (PV) - generated electricity has led to a rapid increase in the deployment of PV and projections that PV could play a significant role in the future U.S. electric sector. The solar resource itself is virtually unlimited; however, the actual contribution of PV electricity is limited by several factors related to the current grid. The first is the limited coincidence between the solar resource and normal electricity demand patterns. The second is the limited flexibility of conventional generators to accommodate this highly variable generation resource. At high penetration of solar generation, increased grid flexibility will be needed to fully utilize the variable and uncertain output from PV generation and to shift energy production to periods of high demand or reduced solar output. Energy storage is one way to increase grid flexibility, and many storage options are available or under development. In this article, however, we consider a technology already beginning to be used at scale - thermal energy storage (TES) deployed with concentrating solar power (CSP). PV and CSP are both deployable in areas of high direct normal irradiance such as the U.S. Southwest. The role of these two technologies is dependent on their costs and relative value, including how their value to the grid changes as a function of what percentage of total generation they contribute to the grid, and how they may actually work together to increase overall usefulness of the solar resource. Both PV and CSP use solar energy to generate electricity. A key difference is the ability of CSP to utilize high-efficiency TES, which turns CSP into a partially dispatchable resource. The addition of TES produces additional value by shifting the delivery of solar energy to periods of peak demand, providing firm capacity and ancillary services, and reducing integration challenges. Given the dispatchability of CSP enabled by TES, it is possible that PV and CSP are at least partially complementary. The dispatchability of CSP with TES can enable higher overall penetration of the grid by solar energy by providing solar-generated electricity during periods of cloudy weather or at night, when PV-generated power is unavailable. Such systems also have the potential to improve grid flexibility, thereby enabling greater penetration of PV energy (and other variable generation sources such as wind) than if PV were deployed without CSP.

Denholm, P.; Mehos, M.

2012-06-01T23:59:59.000Z

445

Understanding Energy Storage Solutions and Capabilities on Utility Distribution Systems  

Science Conference Proceedings (OSTI)

Widespread use of storage will require better grid integration tools to plan for the optimal size, use, and location of energy storage systems. Also important will be a coordinated effort between technology developers and utilities to ensure that storage systems are designed to adequately address utility needs. Utilities must understand the technical attributes and grid operational benefits of energy storage systems. Such operational benefits can also improve the definition of storage system functional r...

2011-12-22T23:59:59.000Z

446

Energy Conversion & Storage Program, 1993 annual report  

DOE Green Energy (OSTI)

The Energy Conversion and Storage Program applies chemistry and materials science principles to solve problems in: production of new synthetic fuels; development of high-performance rechargeable batteries and fuel cells; development of high-efficiency thermochemical processes for energy conversion; characterization of complex chemical processes and chemical species; and the study and application of novel materials for energy conversion and transmission. Projects focus on transport-process principles, chemical kinetics, thermodynamics, chemical kinetics, thermodynamics, separation processes, organic and physical chemistry, novel materials, and advanced methods of analysis.

Cairns, E.J.

1994-06-01T23:59:59.000Z

447

Energy conversion & storage program. 1994 annual report  

DOE Green Energy (OSTI)

The Energy Conversion and Storage Program investigates state-of-the-art electrochemistry, chemistry, and materials science technologies for: (1) development of high-performance rechargeable batteries and fuel cells; (2) development of high-efficiency thermochemical processes for energy conversion; (3) characterization of complex chemical processes and chemical species; (4) study and application of novel materials for energy conversion and transmission. Research projects focus on transport process principles, chemical kinetics, thermodynamics, separation processes, organic and physical chemistry, novel materials, and advanced methods of analysis.

Cairns, E.J.

1995-04-01T23:59:59.000Z

448

Storage/Handling | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

StorageHandling StorageHandling Records Management Procedures for Storage, Transfer & Retrieval of Records from the Washington National Records Center (WNRC) or Legacy Management...

449

Federal Energy Management Program: Covered Product Category: Gas Storage  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas Storage Water Heaters to someone by E-mail Gas Storage Water Heaters to someone by E-mail Share Federal Energy Management Program: Covered Product Category: Gas Storage Water Heaters on Facebook Tweet about Federal Energy Management Program: Covered Product Category: Gas Storage Water Heaters on Twitter Bookmark Federal Energy Management Program: Covered Product Category: Gas Storage Water Heaters on Google Bookmark Federal Energy Management Program: Covered Product Category: Gas Storage Water Heaters on Delicious Rank Federal Energy Management Program: Covered Product Category: Gas Storage Water Heaters on Digg Find More places to share Federal Energy Management Program: Covered Product Category: Gas Storage Water Heaters on AddThis.com... Energy-Efficient Products Federal Requirements Covered Product Categories

450

Innovative Energy Storage Technologies Enabling More Renewable Power |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Technologies Enabling More Renewable Energy Storage Technologies Enabling More Renewable Power Innovative Energy Storage Technologies Enabling More Renewable Power November 15, 2011 - 3:45pm Addthis The PNM Prosperity Energy Storage Project is the nation’s first combined solar generation and storage facility to be fully integrated into a utility’s power grid. Pictured above are the facility's solar panels, including an aerial view in the upper left. | Image courtesy of PNM The PNM Prosperity Energy Storage Project is the nation's first combined solar generation and storage facility to be fully integrated into a utility's power grid. Pictured above are the facility's solar panels, including an aerial view in the upper left. | Image courtesy of PNM Dr. Imre Gyuk Dr. Imre Gyuk Energy Storage Program Manager, Office of Electricity Delivery and Energy

451

Optimal Energy Storage Control Policies for the Smart Power Grid  

E-Print Network (OSTI)

Optimal Energy Storage Control Policies for the Smart Power Grid Iordanis Koutsopoulos Vassiliki is to devise an energy storage control policy that minimizes long-term average grid operational cost. The cost the stored energy. We prove that the policy is asymptotically optimal as the storage capacity becomes large

Koutsopoulos, Iordanis

452

Energy storage in datacenters: what, where, and how much?  

Science Conference Proceedings (OSTI)

Energy storage - in the form of UPS units - in a datacenter has been primarily used to fail-over to diesel generators upon power outages. There has been recent interest in using these Energy Storage Devices (ESDs) for demand-response (DR) to either shift ... Keywords: cost reduction, datacenters, energy storage, power provisioning

Di Wang; Chuangang Ren; Anand Sivasubramaniam; Bhuvan Urgaonkar; Hosam Fathy

2012-06-01T23:59:59.000Z

453

Ris-M-2191 RESEARCH ON ENERGY STORAGE AT  

E-Print Network (OSTI)

. ENERGY STORAGE BASED UPON METAL-HYDROGEN SYSTEMS by Bjørn Vigeholra 29 4.1. General 29 4.2. Results 30 4Risø-M-2191 RESEARCH ON ENERGY STORAGE AT RIS� NATIONAL LABORATORY K. Jensen, S. Krenk, N. This paper was presented at the International Assembly on Energy Storage held from May 27 to June 1, 1979

454

Solar Energy Grid Integration Systems -- Energy Storage (SEGIS-ES).  

DOE Green Energy (OSTI)

This paper describes the concept for augmenting the SEGIS Program (an industry-led effort to greatly enhance the utility of distributed PV systems) with energy storage in residential and small commercial applications (SEGIS-ES). The goal of SEGIS-ES is to develop electrical energy storage components and systems specifically designed and optimized for grid-tied PV applications. This report describes the scope of the proposed SEGIS-ES Program and why it will be necessary to integrate energy storage with PV systems as PV-generated energy becomes more prevalent on the nation's utility grid. It also discusses the applications for which energy storage is most suited and for which it will provide the greatest economic and operational benefits to customers and utilities. Included is a detailed summary of the various storage technologies available, comparisons of their relative costs and development status, and a summary of key R&D needs for PV-storage systems. The report concludes with highlights of areas where further PV-specific R&D is needed and offers recommendations about how to proceed with their development.

Hanley, Charles J.; Ton, Dan T. (U.S. Department of Energy, Washington, D.C.); Boyes, John D.; Peek, Georgianne Huff

2008-07-01T23:59:59.000Z

455

Commercialization of aquifer thermal energy storage technology  

DOE Green Energy (OSTI)

Pacific Northwest Laboratory (PNL) conducted this study for the US Department of Energy's (DOE) Office of Energy Storage and Distribution. The purpose of the study was to develop and screen a list of potential entry market applications for aquifer thermal energy storage (ATES). Several initial screening criteria were used to identify promising ATES applications. These include the existence of an energy availability/usage mismatch, the existence of many similar applications or commercial sites, the ability to utilize proven technology, the type of location, market characteristics, the size of and access to capital investment, and the number of decision makers involved. The in-depth analysis identified several additional screening criteria to consider in the selection of an entry market application. This analysis revealed that the best initial applications for ATES are those where reliability is acceptable, and relatively high temperatures are allowable. Although chill storage was the primary focus of this study, applications that are good candidates for heat ATES were also of special interest. 11 refs., 3 tabs.

Hattrup, M.P.; Weijo, R.O.

1989-09-01T23:59:59.000Z

456

Energy Storage Systems 2007 Peer Review - Utility & Commercial Applications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utility & Commercial Utility & Commercial Applications Presentations Energy Storage Systems 2007 Peer Review - Utility & Commercial Applications Presentations The U.S. DOE Energy Storage Systems Program (ESS) held an annual peer review on September 27, 2007 in San Francisco, CA. Eighteen presentations were divided into categories; those related to utility, commercial, and rail applications of advanced energy storage systems are below. Other presentation categories were: Economics - Benefit Studies and Environment Benefit Studies International Energy Storage Programs Power Electronics Innovations in Energy Storage Systems ESS 2007 Peer Review - Application of Large-Scale ESS in AEP - Ali Nourai, AEP.pdf ESS 2007 Peer Review - Iowa Stored Energy Park - Kent Holst, ISEP.pdf

457

Energy Storage: The Key to a Reliable, Clean Electricity Supply |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage: The Key to a Reliable, Clean Electricity Supply Energy Storage: The Key to a Reliable, Clean Electricity Supply Energy Storage: The Key to a Reliable, Clean Electricity Supply February 22, 2012 - 4:52pm Addthis Improved energy storage technology offers a number of economic and environmental benefits. Improved energy storage technology offers a number of economic and environmental benefits. Matthew Loveless Matthew Loveless Data Integration Specialist, Office of Public Affairs What does this project do? ARPA-E's GRIDS program is investing in new technologies that make storing energy cheaper and more efficient. Energy storage isn't just for AA batteries any more. Thanks to investments from the Department's Advanced Research Projects Agency-Energy (ARPA-E), energy storage may soon play a bigger part in our electricity

458

Reluctance apparatus for flywheel energy storage  

DOE Patents (OSTI)

A motor generator for providing high efficiency, controlled voltage output or storage of energy in a flywheel system. A motor generator includes a stator of a soft ferromagnetic material, a motor coil and a generator coil, and a rotor has at least one embedded soft ferromagnetic piece. Control of voltage output is achieved by use of multiple stator pieces and multiple rotors with controllable gaps between the stator pieces and the soft ferromagnetic piece.

Hull, John R. (Downers Grove, IL)

2000-01-01T23:59:59.000Z

459

A Multi-Level Grid Interactive Bi-directional AC/DC-DC/AC Converter and a Hybrid Battery/Ultra-capacitor Energy Storage System with Integrated Magnetics for Plug-in Hybrid Electric Vehicles  

DOE Green Energy (OSTI)

This study presents a bi-directional multi-level power electronic interface for the grid interactions of plug-in hybrid electric vehicles (PHEVs) as well as a novel bi-directional power electronic converter for the combined operation of battery/ultracapacitor hybrid energy storage systems (ESS). The grid interface converter enables beneficial vehicle-to-grid (V2G) interactions in a high power quality and grid friendly manner; i.e, the grid interface converter ensures that all power delivered to/from grid has unity power factor and almost zero current harmonics. The power electronic converter that provides the combined operation of battery/ultra-capacitor system reduces the size and cost of the conventional ESS hybridization topologies while reducing the stress on the battery, prolonging the battery lifetime, and increasing the overall vehicle performance and efficiency. The combination of hybrid ESS is provided through an integrated magnetic structure that reduces the size and cost of the inductors of the ESS converters. Simulation and experimental results are included as prove of the concept presenting the different operation modes of the proposed converters.

Onar, Omer C [ORNL

2011-01-01T23:59:59.000Z

460

Fuel Cell Technologies Office: Flow Cells for Energy Storage Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Flow Cells for Energy Flow Cells for Energy Storage Workshop to someone by E-mail Share Fuel Cell Technologies Office: Flow Cells for Energy Storage Workshop on Facebook Tweet about Fuel Cell Technologies Office: Flow Cells for Energy Storage Workshop on Twitter Bookmark Fuel Cell Technologies Office: Flow Cells for Energy Storage Workshop on Google Bookmark Fuel Cell Technologies Office: Flow Cells for Energy Storage Workshop on Delicious Rank Fuel Cell Technologies Office: Flow Cells for Energy Storage Workshop on Digg Find More places to share Fuel Cell Technologies Office: Flow Cells for Energy Storage Workshop on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations Multimedia Conferences & Meetings Annual Merit Review Proceedings

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Large Scale Computing and Storage Requirements for Fusion Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

at NERSC HPC Requirements Reviews Requirements for Science: Target 2014 Fusion Energy Sciences (FES) Large Scale Computing and Storage Requirements for Fusion Energy...

462

ESS 2012 Peer Review - Energy Storage Test Pad - David Rose,...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Test Pad Date 09282012 Name David Rose The author gratefully acknowledges the support of Dr. Imre Gyuk and the Department of Energy's Office of Electricity...

463

Feature - Argonne signs energy storage research MOU with Japan  

NLE Websites -- All DOE Office Websites (Extended Search)

signs energy storage research MOU with Japan Argonne and NEDO, a Japanese government organization for energy technology R&D, have signed an MOU for cooperative information exchange...

464

Large Scale Computing and Storage Requirements for Basic Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

at NERSC HPC Requirements Reviews Requirements for Science: Target 2014 Basic Energy Sciences (BES) Large Scale Computing and Storage Requirements for Basic Energy...

465

ARPA-E Announces $43 Million for Transformational Energy Storage...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ARPA-E Announces 43 Million for Transformational Energy Storage Projects to Advance Electric Vehicle and Grid Technologies ARPA-E Announces 43 Million for Transformational Energy...

466

Modelling Concentrating Solar Power with Thermal Energy Storage...  

NLE Websites -- All DOE Office Websites (Extended Search)

limited energy available for either generation or storage. The modelled dispatch of CSP energy in PLEXOS is based on the hydro generation module, modified to incorporate the...

467

Advanced Thermal Energy Storage: Novel Tuning of Critical Fluctuations for Advanced Thermal Energy Storage  

Science Conference Proceedings (OSTI)

HEATS Project: NAVITASMAX is developing a novel thermal energy storage solution. This innovative technology is based on simple and complex supercritical fluids— substances where distinct liquid and gas phases do not exist, and tuning the properties of these fluid systems to increase their ability to store more heat. In solar thermal storage systems, heat can be stored in NAVITASMAX’s system during the day and released at night—when the sun is not shining—to drive a turbine and produce electricity. In nuclear storage systems, heat can be stored in NAVITASMAX’s system at night and released to produce electricity during daytime peak-demand hours.

None

2011-12-01T23:59:59.000Z

468

Market and policy barriers to energy storage deployment : a study for the energy storage systems program.  

Science Conference Proceedings (OSTI)

Electric energy storage technologies have recently been in the spotlight, discussed as essential grid assets that can provide services to increase the reliability and resiliency of the grid, including furthering the integration of variable renewable energy resources. Though they can provide numerous grid services, there are a number of factors that restrict their current deployment. The most significant barrier to deployment is high capital costs, though several recent deployments indicate that capital costs are decreasing and energy storage may be the preferred economic alternative in certain situations. However, a number of other market and regulatory barriers persist, limiting further deployment. These barriers can be categorized into regulatory barriers, market (economic) barriers, utility and developer business model barriers, crosscutting barriers and technology barriers. This report, through interviews with stakeholders and review of regulatory filings in four regions roughly representative of the United States, identifies the key barriers restricting further energy storage development in the country. The report also includes a discussion of possible solutions to address these barriers and a review of initiatives around the country at the federal, regional and state levels that are addressing some of these issues. Energy storage could have a key role to play in the future grid, but market and regulatory issues have to be addressed to allow storage resources open market access and compensation for the services they are capable of providing. Progress has been made in this effort, but much remains to be done and will require continued engagement from regulators, policy makers, market operators, utilities, developers and manufacturers.

Bhatnagar, Dhruv; Currier, Aileen B.; Hernandez, Jacquelynne; Ma, Ookie [U.S. Department of Energy, Washington, D.C.; Kirby, Brendan [U.S. Department of Energy, Washington, D.C.

2013-09-01T23:59:59.000Z

469

Energy Storage: The Key to a Reliable, Clean Electricity Supply |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storage: The Key to a Reliable, Clean Electricity Supply Storage: The Key to a Reliable, Clean Electricity Supply Energy Storage: The Key to a Reliable, Clean Electricity Supply February 22, 2012 - 4:52pm Addthis Improved energy storage technology offers a number of economic and environmental benefits. Improved energy storage technology offers a number of economic and environmental benefits. Matthew Loveless Matthew Loveless Data Integration Specialist, Office of Public Affairs What does this project do? ARPA-E's GRIDS program is investing in new technologies that make storing energy cheaper and more efficient. Energy storage isn't just for AA batteries any more. Thanks to investments from the Department's Advanced Research Projects Agency-Energy (ARPA-E), energy storage may soon play a bigger part in our electricity

470

Energy storage systems program report for FY1996  

DOE Green Energy (OSTI)

Sandia National Laboratories, New Mexico, conducts the Energy Storage Systems Program, which is sponsored by the US Department of Energy`s Office of Utility Technologies. The goal of this program is to assist industry in developing cost-effective energy storage systems as a resource option by 2000. Sandia is responsible for the engineering analyses, contracted development, and testing of energy storage systems for stationary applications. This report details the technical achievements realized during fiscal year 1996.

Butler, P.C.

1997-05-01T23:59:59.000Z

471

Megawatt-Class Lithium Ion Energy Storage Systems  

Science Conference Proceedings (OSTI)

This project describes the most recent developments in the use of energy storage in frequency regulation and other ancillary service applications. This includes an analysis of limited storage in frequency regulation applications in the Pennsylvania-New Jersey-Maryland Interconnection (PJM), as well as a case study of a lithium ion energy storage system installed in California.

2009-12-22T23:59:59.000Z

472

Energy Storage Systems 2010 Update Conference | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 Update Conference 10 Update Conference Energy Storage Systems 2010 Update Conference The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations are available through the individual session links. The agenda and list of attendees are available below. Presentations Day 1 Session 1: Chaired by Imre Gyuk, DOE Session 2: Chaired by Terry Aselage, SNL Session 3: Chaired by Jun Lui, PNNL Session 4: Chaired by John Boyes, SNL Day 2 Session 1: Chaired by Imre Gyuk, DOE Session 2: Chaired by Bill Ayres, NETL

473

Energy Storage Systems 2009 Peer Review | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

09 Peer Review 09 Peer Review Energy Storage Systems 2009 Peer Review The DOE Energy Storage Systems Program (ESS) conducted an annual peer review in Seattle, WA on October 8, 2009. The 1-day conference included welcoming remarks from OE's Imre Gyuk as well as a program overview from John Boyes of Sandia National Laboratories and 11 presentations on individual projects. The agenda, program overview, and project presentations are available below. ESS 2009 Peer Review - Agenda.pdf ESS 2009 Peer Review - DOE-ESS Overview - John Boyes, SNL.pdf ESS 2009 Peer Review - Long Island Bus NaS Battery Energy Storage Project - Steve Eckroad, EPRI.pdf ESS 2009 Peer Review - Development of an Integrated Power Controller Based on HT SOI and SiC - Joseph Henfling, SNL.pdf ESS 2009 Peer Review - Large Format Carbon Enhanced VRLA Battery Test

474

Batteries for energy storage: part 2  

SciTech Connect

Explores 4 large battery RandD programs. Two are individual electrochemical systems for electric utility energy storage: zinc-chlorine and sodium sulfur. The third is a high-temperature battery, lithium-iron sulfide, which is expected to be applicable in electric vehicles. Reviews the nearer term EV battery development programs, which include zinc-nickel oxide, iron-nickel oxide, and lead-acid batteries. Suggests that batteries appear to be an ideal companion to coal- and nuclear power-derived electrical energy, to play a key role in electrical generation and distribution networks and to power vehicles. Batteries could augment solarderived electrical energy to attain continuity and reliability of power. Battery systems now under development represent a broad range of possible approaches encompassing extremes of the periodical table, a wide variety of operating temperatures, and limitless design concepts. Along with substantial international emphasis on battery development, this range of approaches suggests that one or more candidate systems can be demonstrated to have commercial viability. While commercial viability can be demonstrated, actual implementation will be deterred by high capital cost, substantial commercialization costs, and buyer reluctance. Concludes that because oil has an unstable future, legislation or regulation coupled with personal inconvenience (rationing or waiting in gas lines) can override the economics of utility battery energy storage.

Douglas, D.L.; Birk, J.R.

1983-02-01T23:59:59.000Z

475

Energy storage benefits and market analysis handbook : a study for the DOE Energy Storage Systems Program.  

DOE Green Energy (OSTI)

This Guide describes a high level, technology-neutral framework for assessing potential benefits from and economic market potential for energy storage used for electric utility-related applications. In the United States use of electricity storage to support and optimize transmission and distribution (T&D) services has been limited due to high storage system cost and by limited experience with storage system design and operation. Recent improvement of energy storage and power electronics technologies, coupled with changes in the electricity marketplace, indicate an era of expanding opportunity for electricity storage as a cost-effective electric resource. Some recent developments (in no particular order) that drive the opportunity include: (1) states adoption of the renewables portfolio standard (RPS), which may increased use of renewable generation with intermittent output, (2) financial risk leading to limited investment in new transmission capacity, coupled with increasing congestion on some transmission lines, (3) regional peaking generation capacity constraints, and (4) increasing emphasis on locational marginal pricing (LMP).

Eyer, James M. (Distributed Utility Associates, Livermore, CA); Corey, Garth P.; Iannucci, Joseph J., Jr. (Distributed Utility Associates, Livermore, CA)

2004-12-01T23:59:59.000Z

476

NV energy electricity storage valuation : a study for the DOE Energy Storage Systems program.  

SciTech Connect

This study examines how grid-level electricity storage may benefit the operations of NV Energy, and assesses whether those benefits are likely to justify the cost of the storage system. To determine the impact of grid-level storage, an hourly production cost model of the Nevada Balancing Authority (%22BA%22) as projected for 2020 was created. Storage was found to add value primarily through the provision of regulating reserve. Certain storage resources were found likely to be cost-effective even without considering their capacity value, as long as their effectiveness in providing regulating reserve was taken into account. Giving fast resources credit for their ability to provide regulating reserve is reasonable, given the adoption of FERC Order 755 (%22Pay-for-performance%22). Using a traditional five-minute test to determine how much a resource can contribute to regulating reserve does not adequately value fast-ramping resources, as the regulating reserve these resources can provide is constrained by their installed capacity. While an approximation was made to consider the additional value provided by a fast-ramping resource, a more precise valuation requires an alternate regulating reserve methodology. Developing and modeling a new regulating reserve methodology for NV Energy was beyond the scope of this study, as was assessing the incremental value of distributed storage.

Ellison, James F.; Bhatnagar, Dhruv; Samaan, Nader [Pacific Northwest National Laboratory, Richland, WA; Jin, Chunlian [Pacific Northwest National Laboratory, Richland, WA

2013-06-01T23:59:59.000Z

477

Energy Storage and Distributed Energy Generation Project, Final Project Report  

Science Conference Proceedings (OSTI)

This report serves as a Final Report under the “Energy Storage and Distribution Energy Generation Project” carried out by the Transportation Energy Center (TEC) at the University of Michigan (UM). An interdisciplinary research team has been working on fundamental and applied research on: -distributed power generation and microgrids, -power electronics, and -advanced energy storage. The long-term objective of the project was to provide a framework for identifying fundamental research solutions to technology challenges of transmission and distribution, with special emphasis on distributed power generation, energy storage, control methodologies, and power electronics for microgrids, and to develop enabling technologies for novel energy storage and harvesting concepts that can be simulated, tested, and scaled up to provide relief for both underserved and overstressed portions of the Nation’s grid. TEC’s research is closely associated with Sections 5.0 and 6.0 of the DOE "Five-year Program Plan for FY2008 to FY2012 for Electric Transmission and Distribution Programs, August 2006.”

Schwank, Johannes; Mader, Jerry; Chen, Xiaoyin; Mi, Chris; Linic, Suljo; Sastry, Ann Marie; Stefanopoulou, Anna; Thompson, Levi; Varde, Keshav

2008-03-31T23:59:59.000Z

478

State of Solar Thermal Energy Storage Development 2010  

Science Conference Proceedings (OSTI)

Adding solar thermal energy storage (TES) to concentrating solar thermal power (CSP) plants expands both the amount and timing of power delivered to the grid. Thermal storage associated with CSP plants is typically much more efficient and cost-effective than electrical or mechanical forms of storage. In many cases, the addition of thermal energy storage can lower the levelized electricity production cost and increase the solar plant capacity factor, enabling the availability of solar electricity during p...

2010-12-23T23:59:59.000Z

479

Strategic Intelligence Update: Energy Storage & Distributed Generation, November 2012  

Science Conference Proceedings (OSTI)

Energy Storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy ...

2012-11-28T23:59:59.000Z

480

Strategic Intelligence Update: Energy Storage and Distributed Generation, June 2013  

Science Conference Proceedings (OSTI)

Energy Storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades.  Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy ...

2013-06-28T23:59:59.000Z

Note: This page contains sample records for the topic "magnetic energy storage" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Strategic Intelligence Update: Energy Storage & Distributed Generation, December 2011  

Science Conference Proceedings (OSTI)

Energy Storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy arbitrage and by ...

2011-12-14T23:59:59.000Z

482

Strategic Intelligence Update: Energy Storage & Distributed Generation — March 2011  

Science Conference Proceedings (OSTI)

Energy Storage and Distributed Generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy arbitrage and by ...

2011-03-22T23:59:59.000Z

483

Strategic Intelligence Update: Energy Storage & Distributed Generation— May 2011  

Science Conference Proceedings (OSTI)

Energy Storage and Distributed Generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy arbitrage and by ...

2011-05-26T23:59:59.000Z

484

Strategic Intelligence Update: Energy Storage & Distributed Generation, September 2011  

Science Conference Proceedings (OSTI)

Energy storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy arbitrage and by ...

2011-10-03T23:59:59.000Z

485

Strategic Intelligence Update: Energy Storage & Distributed Generation, September 2012  

Science Conference Proceedings (OSTI)

Energy Storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades.  Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy ...

2012-09-27T23:59:59.000Z

486

Cost analysis of energy storage systems for electric utility applications  

DOE Green Energy (OSTI)

Under the sponsorship of the Department of Energy, Office of Utility Technologies, the Energy Storage System Analysis and Development Department at Sandia National Laboratories (SNL) conducted a cost analysis of energy storage systems for electric utility applications. The scope of the study included the analysis of costs for existing and planned battery, SMES, and flywheel energy storage systems. The analysis also identified the potential for cost reduction of key components.

Akhil, A. [Sandia National Lab., Albuquerque, NM (United States); Swaminathan, S.; Sen, R.K. [R.K. Sen & Associates, Inc., Bethesda, MD (United States)

1997-02-01T23:59:59.000Z

487

Strategic Intelligence Update: Energy Storage and Distributed Generation, September 2013  

Science Conference Proceedings (OSTI)

Energy Storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy ...

2013-09-27T23:59:59.000Z

488

Duke Energy Notrees Wind Storage Demonstration Project: 2013 Interim Report  

Science Conference Proceedings (OSTI)

This Electric Power Research Institute (EPRI) technical update is an interim report summarizing the status of Duke Energy’s Notrees Wind Storage Demonstration Project, which involves integrating a 36-MW battery energy storage system (BESS) from Xtreme Power with the152.6-MW Notrees Wind Farm. Xtreme Power’s solid lead-acid battery represents one of an emerging number of energy storage devices endowed with the potential to serve multiple value-added utility applications. ...

2013-12-19T23:59:59.000Z

489

Energy Storage Systems Program Report for FY99  

DOE Green Energy (OSTI)

Sandia National Laboratories, New Mexico, conducts the Energy Storage Systems Program, which is sponsored by the US Department of Energy's Office of Power Technologies. The goal of this program is to develop cost-effective electric energy storage systems for many high-value stationary applications in collaboration with academia and industry. Sandia National Laboratories is responsible for the engineering analyses, contracted development, and testing of energy storage components and systems. This report details the technical achievements realized during fiscal year 1999.

BOYES,JOHN D.

2000-06-01T23:59:59.000Z

490

Strategic Intelligence Update: Energy Storage and Distributed Generation  

Science Conference Proceedings (OSTI)

Energy Storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy arbitrage and by ...

2011-08-08T23:59:59.000Z

491

Strategic Intelligence Update: Energy Storage and Distributed Generation, November 2013  

Science Conference Proceedings (OSTI)

Energy Storage and distributed generation technologies add value to a wide range of applications within the electric utility enterprise. Both energy storage and distributed generation systems can help utilities shift and manage peak loads within the distribution system, improve reliability, and potentially help defer infrastructure upgrades. Bulk energy storage has the ability to improve the value of intermittent renewable resources and to provide multiple benefit streams through energy arbitrage ...

2013-11-25T23:59:59.000Z

492

Energy conversion & storage program. 1995 annual report  

DOE Green Energy (OSTI)

The 1995 annual report discusses laboratory activities in the Energy Conversion and Storage (EC&S) Program. The report is divided into three categories: electrochemistry, chemical applications, and material applications. Research performed in each category during 1995 is described. Specific research topics relate to the development of high-performance rechargeable batteries and fuel cells, the development of high-efficiency thermochemical processes for energy conversion, the characterization of new chemical processes and complex chemical species, and the study and application of novel materials related to energy conversion and transmission. Research projects focus on transport-process principles, chemical kinetics, thermodynamics, separation processes, organic and physical chemistry, novel materials and deposition technologies, and advanced methods of analysis.

Cairns, E.J.

1996-06-01T23:59:59.000Z

493

Conventional Storage Water Heaters | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conventional Storage Water Heaters Conventional Storage Water Heaters July 30, 2013 - 3:39pm Addthis Illustration showing the components of a storage water heater. On top of the...

494

THERMAL ENERGY STORAGE IN AQUIFERS WORKSHOP  

E-Print Network (OSTI)

ground water was pumped into the storage tank from the well,be withdrawn from storage, HTW is pumped from the hot well,storage well. However, both wells are capable of being pumped and

Authors, Various

2011-01-01T23:59:59.000Z

495

A comparison of the conductor requirements for energy storage devices made with ideal coil geometries  

DOE Green Energy (OSTI)

Superconducting Magnetic Energy Storage (SMES) plants have been proposed in both solenoidal and toroidal geometries. The former is efficient in terms of the quantity of superconductor required per unit of stored energy. For applications where a fringe field could be a problem, the toroidal geometry, which requires at least a factor of two more material, has been proposed. In addition to the solenoid and toroid, other geometries are possible, such as linear multipoles and spherical coils. These geometries have been considered for use in applications other than energy storage. In this report, the effectiveness (quantity of superconductor/stored energy) is calculated for various coil geometries. 7 refs., 4 tabs.

Hassenzahl, W.

1988-08-01T23:59:59.000Z